- Sep 23, 2005
-
-
Benjamin Herrenschmidt authored
The SMU is the "system controller" chip used by Apple recent G5 machines including the iMac G5. It drives things like fans, i2c busses, real time clock, etc... The current kernel contains a very crude driver that doesn't do much more than reading the real time clock synchronously. This is a completely rewritten driver that provides interrupt based command queuing, a userland interface, and an i2c/smbus driver for accessing the devices hanging off the SMU i2c busses like temperature sensors. This driver is a basic block for upcoming work on thermal control for those machines, among others. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Anton Blanchard authored
Fix my stupid bug in the 64bit version of PTRACE_SET_DEBUGREG. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
Fix build when iommu debug is enabled. Signed-off-by:
-
Anton Blanchard authored
The recent iommu fix broke booting on some POWER4 and POWER5 LPAR boxes. It looks like we have been calling the non LPAR iommu_dev_setup on LPAR machines for a while. The recent iommu fix caused that code path to fail. It looks like we just need to hook up the devices iommu_table to the parents one, so do that instead of calling iommu_dev_setup_pSeries and crossing the streams. Signed-off-by:
-
OGAWA Hirofumi authored
EXT3_MOUNT_DATA_FLAGS is not a boolean. This fixes it. Signed-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Christoph Lameter authored
The numa slab allocator may allocate pages from foreign nodes onto the lists for a particular node if a node runs out of memory. Inspecting the slab->nodeid field will not reflect that the page is now in use for the slabs of another node. This patch fixes that issue by adding a node field to free_block so that the caller can indicate which node currently uses a slab. Also removes the check for the current node from kmalloc_cache_node since the process may shift later to another node which may lead to an allocation on another node than intended. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Rafael J. Wysocki authored
The following patch makes swsusp avoid triggering the BUG_ON() in swsusp_suspend() if there is not enough memory for suspend. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Robert Love authored
- Handle dmi_system_check() elegantly, now that my bugfix is upstream. - Add support for the X41 and R52. - Cleanup some comments do I do not have to keep updating them with each new whitelisted laptop. Signed-off-by:
Robert Love <rml@novell.com> Signed-off-by:
-
Keir Fraser authored
The address passed to io_remap_pfn_range() in hpet_mmap() does not need to be converted using __pa(): it is already a physical address. This bug was found and the patch suggested by Clay Harris. I introduced this particular bug when making io_remap_pfn_range changes a few months ago. In fact mmap()ing /dev/hpet has *never* previously worked: before my changes __pa() was being executed on an ioremap()ed virtual address, which is also invalid. Signed-off-by:
Keir Fraser <keir@xensource.com> Cc: Robert Picco <Robert.Picco@hp.com> Signed-off-by:
-
Ivan Kokshaysky authored
It is essential that index_of() be inlined. But alpha undoes the gcc inlining hackery and index_of() ends up out-of-line. So fiddle with things to make that function inline again. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by:
-
Ivan Kokshaysky authored
acquire_console_sem() does BUG() in interrupt context now, as in the case of SysRq-b. Cc: Richard Henderson <rth@twiddle.net> Signed-off-by:
-
Randy Dunlap authored
Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Benjamin Herrenschmidt authored
Current -git tree doesn't build when enabling oprofile on a non-bookE CPU (like on a PowerMac for example). While there is no performance counter support for these CPUs implemented yet, it's still nice to be able to use the timer based sampling, and that got broken. Signed-off-by:
-
Grant Coady authored
Fix namespace clash: drivers/mtd/devices/docecc.c:43:1: warning: "DEBUG" redefined In file included from drivers/mtd/devices/docecc.c:40: include/linux/mtd/mtd.h:219:1: warning: this is the location of the previous definition Signed-off-by:
Grant Coady <gcoady@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Bernd Petrovitsch authored
Rename the (apparently) bttv intern #define vprintk to verbprintk to resolve a name clash. Reason: vprintk() is defined in include/linux/kernel.h similar to printk but with a va_list argument. (akpm: I changed it to bttv_printk) Cc: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by:
-
Latchesar Ionkov authored
If error occurs while in v9fs_get_sb after it calles sget, the dentry object of the root and its inode may be freed twice -- once while handling the error in v9fs_get_sb, and second time when v9fs_get_sb calles deactivate_super (which in turn calls v9fs_kill_super) The patch removes the unnecessary code that frees the root dentry and its inode. Signed-off-by:
Latchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by:
-
Latchesar Ionkov authored
v9fs_vfs_readlink allocates space for the link using __getname and errorneously uses strlen on the newly allocated buffer to check if the buffer passed by the user is bigger than the one returned by __getname. The patch replaces the strlen usage to PATH_MAX, which is the actual size of the buffers returned by __getname. Signed-off-by:
-
Latchesar Ionkov authored
When a new session is created it uses a template object of the specified transport type to instantiate its own copy. The code for the making a copy of the template object was lost, and the object itself is attached to the v9fs session. This leads to many sessions using the same transport instead of having their own copy. The patch puts back the code that makes a copy of the template object. Signed-off-by:
-
Latchesar Ionkov authored
When v9fs_deserealize_fcall deserializes a Rwalk message, it incorrectly allocates space for the qid array in the source instead of the destination buffer. Signed-off-by:
-
Latchesar Ionkov authored
buf_check_size function checks if the conv buffer has enough space for the performed operation, but it doesn't return the result back to the calling function, only logs an error in the log. The report-back-error functionality was lost when buf_check_size was converted from macro to inline function. The return in the macro used to exit from the functions that include it, after the conversion it just exits from the inline function itself. The patch makes buf_check_size to return flag and all functions that use it check if they should perform the operation, or exit. Signed-off-by:
-
Prasanna S Panchamukhi authored
This patch updates the maintainers list with kprobes maintainers. Signed-of-by:
Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by:
-
Eric W. Biederman authored
In the lead up to 2.6.13 I fixed a large number of reboot problems by making the calling conventions consistent. Despite checking and double checking my work it appears I missed an obvious one. The S4 suspend code for PM_DISK_PLATFORM was also calling device_shutdown without setting system_state, and was not calling the appropriate reboot_notifier. This patch fixes the bug by replacing the call of device_suspend with kernel_poweroff_prepare. Various forms of this failure have been fixed and tracked for a while. Thanks for tracking this down go to: Alexey Starikovskiy, Meelis Roos <mroos@linux.ee>, Nigel Cunningham <ncunningham@cyclades.com>, Pierre Ossman <drzeus-list@drzeus.cx> History of this bug is at: http://bugme.osdl.org/show_bug.cgi?id=4320 Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
In the lead up to 2.6.13 I fixed a large number of reboot problems by making the calling conventions consistent. Despite checking and double checking my work it appears I missed an obvious one. This first patch simply refactors the reboot routines so all of the preparation for various kinds of reboots are in their own functions. Making it very hard to get the various kinds of reboot out of sync. Signed-off-by:
-
Andrew Morton authored
fs/proc/base.c: In function `proc_task_root_link': fs/proc/base.c:364: warning: ISO C90 forbids mixed declarations and code Signed-off-by:
-
Linus Torvalds authored
-
- Sep 22, 2005
-
-
Hidetoshi Seto authored
Verify the pfn is valid before calling pfn_to_page(), and cut isolation message if nothing was done. Signed-off-by:
Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by:
Russ Anderson <rja@sgi.com> Signed-off-by:
Tony Luck <tony.luck@intel.com>
-
Keith Owens authored
Wire the MCA/INIT handler stacks into DTR[2] and track them in IA64_KR(CURRENT_STACK). This gives the MCA/INIT handler stacks the same TLB status as normal kernel stacks. Reload the old CURRENT_STACK data on return from OS to SAL. Signed-off-by:
Keith Owens <kaos@sgi.com> Signed-off-by:
-
Peter Chubb authored
The sd driver now uses scsi_execute_req() for almost everything. scsi_execute_req() converts requests into scatterlists. Fix the HP SCSI disk simulator to understand scatterlists for more commands. Without this patch the current kernel will not boot on the simulator (the disks are always detected as having no sectors, and so cannot be mounted). Signed-off-by:
Peter Chubb <peterc@gelato.unsw.edu.au> Signed-off-by:
-
Kumar Gala authored
For platforms that don't have PCI IO at 0 the outbound window registers were not being properly configured. Signed-off-by:
Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by:
Kumar K. Gala <kumar.gala@freescale.com> Signed-off-by:
-
Alan Stern authored
This patch (as564) updates Documentation/usb/URB.txt, bringing it roughly up to the current level. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Pete Zaitcev authored
This code appears to be more trouble than it's worth, considering that no normal users reload drivers. So, we comment it for now. It is not removed outright for the benefit of hackers (that is, myself). Signed-off-by:
Pete Zaitcev <zaitcev@yahoo.com> Signed-off-by:
-
David Hollis authored
USB: Add device id's for Novatel Wireless CDMA wireless PC card. The Novatel CDMA card behaves the same as the AirPrime by providing a USB serial port. Signed-off-by:David Hollis <dhollis@davehollis.com> Signed-off-by:
-
Matthias Urlichs authored
The card sometimes sends >2000 bytes in one single chunk. Ouch. Signed-Off-By:
Matthias Urlichs <smurf@smurf.noris.de> Signed-off-by:
-
Kevin Vigor authored
Addresses some small bugs in the pegasus ethernet-over-USB driver. Specifically, malformed long packets from the adapter could cause a kernel panic; the interrupt interval calculation was inappropriate for high-speed devices; the return code from read_mii_word was tested incorrectly; and failure to unlink outstanding URBs before freeing them could lead to kernel panics when unloading the driver. Signed-off-by:
Kevin Vigor <kevin@realmsys.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Three minor sl811-hcd fixes: - Elminate memory leak on one (rare) disable/shutdown path. - For periodic transfers that don't need to be scheduled, update urb->start_frame to represent the transfer phase correctly. - Report the (single) port as removable, by default. Since no drivers yet use start_frame or that part of the hub descriptor, only that leak is likely to ever matter. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Richard Purdie authored
This patch fixes several types in the PXA25x udc driver and hence fixes several compiler warnings. Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Acked-by:
-
Peter Favrholdt authored
I'm using a 2 port USB RS232 dongle to connect to a serial-IR cradle for a bar code reader). Detecting the baudrate of the serial-IR involves keeping DTR low while changing baudrate. This works using normal 16550A serial ports as well as the FTDI driver version 1.4.0 (Linux 2.6.8) but stopped working with the change to "ensure RTS and DTR are raised when changing baudrate" introduced in version 1.4.1 (Linux 2.6.9). The attached patch fixes this, so RTS and DTR is only raised when changing baudrate iff the previous baudrate was B0. Signed-off-by:
Peter Favrholdt <pfavr@how.dk> Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Matthias Urlichs authored
Added support for HUAWEI E600 and Audiovox AirCard User reports say that these devices work without driver modification. Signed-off-by:
-
Pete Zaitcev authored
This patch fixes a few problems with ub and cleans up a couple of things: - Bump UB_MAX_REQ_SG, this allows to burn CDs - Drop initialization of urb.transfer_flags, now that URB_UNLINK_ASYNC is gone - Add forgotten processing of stalls at GetMaxLUN - Remove a few more P3-tagged printks whose time has come - Correct comment about ZIP-100 Signed-off-by:
-
Linda Xie authored
Signed-off-by:
Linda Xie <lxie@us.ibm.com> Signed-off-by:
-
