From 2eda344546caaf9168e778a4007f4609e95106e0 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Mon, 11 Aug 2008 10:18:39 +0200
Subject: [PATCH 001/492] ALSA: hda - Add a new function to seek for a codec ID

Gateway notebooks have their ID inside codec vendor ID, not at PCI ID. Due to
that, model auto-detection were not possible with the standard seek method.

This is what is found at lspci -vnn:

00:14.2 Audio device [0403]: ATI Technologies Inc SB450 HDA Audio [1002:437b] (rev 01)
        Subsystem: ATI Technologies Inc SB450 HDA Audio [1002:437b]

Yet, autodetection is possible, since the codec properly reflects the vendor at
the Subsystem ID:

$ cat /proc/asound/card0/codec#0 |head -4

Codec: SigmaTel STAC9250
Address: 0
Vendor Id: 0x83847634
Subsystem Id: 0x107b0367

This patch adds a new autodetection function that seeks for codec subsystem ID.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_codec.c | 61 +++++++++++++++++++++++++++++++++++++++
 sound/pci/hda/hda_local.h |  3 ++
 2 files changed, 64 insertions(+)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 004344825e9..9c1af0101dd 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -2704,6 +2704,67 @@ int snd_hda_check_board_config(struct hda_codec *codec,
 }
 EXPORT_SYMBOL_HDA(snd_hda_check_board_config);
 
+/**
+ * snd_hda_check_board_codec_sid_config - compare the current codec
+				          subsystem ID with the
+					  config table
+
+	   This is important for Gateway notebooks with SB450 HDA Audio
+	   where the vendor ID of the PCI device is:
+		ATI Technologies Inc SB450 HDA Audio [1002:437b]
+	   and the vendor/subvendor are found only at the codec.
+
+ * @codec: the HDA codec
+ * @num_configs: number of config enums
+ * @models: array of model name strings
+ * @tbl: configuration table, terminated by null entries
+ *
+ * Compares the modelname or PCI subsystem id of the current codec with the
+ * given configuration table.  If a matching entry is found, returns its
+ * config value (supposed to be 0 or positive).
+ *
+ * If no entries are matching, the function returns a negative value.
+ */
+int snd_hda_check_board_codec_sid_config(struct hda_codec *codec,
+			       int num_configs, const char **models,
+			       const struct snd_pci_quirk *tbl)
+{
+	const struct snd_pci_quirk *q;
+
+	/* Search for codec ID */
+	for (q = tbl; q->subvendor; q++) {
+		unsigned long vendorid = (q->subdevice) | (q->subvendor << 16);
+
+		if (vendorid == codec->subsystem_id)
+			break;
+	}
+
+	if (!q->subvendor)
+		return -1;
+
+	tbl = q;
+
+	if (tbl->value >= 0 && tbl->value < num_configs) {
+#ifdef CONFIG_SND_DEBUG_DETECT
+		char tmp[10];
+		const char *model = NULL;
+		if (models)
+			model = models[tbl->value];
+		if (!model) {
+			sprintf(tmp, "#%d", tbl->value);
+			model = tmp;
+		}
+		snd_printdd(KERN_INFO "hda_codec: model '%s' is selected "
+			    "for config %x:%x (%s)\n",
+			    model, tbl->subvendor, tbl->subdevice,
+			    (tbl->name ? tbl->name : "Unknown device"));
+#endif
+		return tbl->value;
+	}
+	return -1;
+}
+EXPORT_SYMBOL_HDA(snd_hda_check_board_codec_sid_config);
+
 /**
  * snd_hda_add_new_ctls - create controls from the array
  * @codec: the HDA codec
diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h
index 6f2fe0f9fdd..1dd8716c387 100644
--- a/sound/pci/hda/hda_local.h
+++ b/sound/pci/hda/hda_local.h
@@ -296,6 +296,9 @@ void snd_print_pcm_bits(int pcm, char *buf, int buflen);
 int snd_hda_check_board_config(struct hda_codec *codec, int num_configs,
 			       const char **modelnames,
 			       const struct snd_pci_quirk *pci_list);
+int snd_hda_check_board_codec_sid_config(struct hda_codec *codec,
+                               int num_configs, const char **models,
+                               const struct snd_pci_quirk *tbl);
 int snd_hda_add_new_ctls(struct hda_codec *codec,
 			 struct snd_kcontrol_new *knew);
 
-- 
GitLab


From 9cb36c2afc298a2f2085ae0071924b7e3f55e72d Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Mon, 11 Aug 2008 10:18:39 +0200
Subject: [PATCH 002/492] ALSA: patch_sigmatel: Add missing Gateway entries and
 autodetection

Gateway autodetection and entries are incomplete.

This patch adds the entries found at the .INI file for their driver version
5.10.5082.0.

It also uses the proper code to seek for notebook ID, since this is based on
codec subsystem ID on those devices.

This should provide a proper pinup for several gateways notebooks:
	Gateway M465-E Notebook [Part #1008637]
	Gateway M465-G Notebook [Part #1008667]
	Gateway NX260X Notebook [Part #1008794]
	Gateway NX100X Notebook [Part #1008798]
	Gateway E-100M Notebook [Part #1008799]
	Gateway E-100M G Notebook [Part #1008800]
	Gateway M255-E Notebook [Part #1008801]
	Gateway M255-G Notebook [Part #1008803]
	Gateway M285-E Convertible Notebook [Part #1008804]
	Gateway M285-G Convertible Notebook [Part #1008805]
	Gateway CX210S Convertible Notebook [Part #1008807]
	Gateway CX210X Convertible Notebook [Part #1008808]
	Gateway E-100M SB Notebook [Part #1008973]
	Gateway M255-E SB Notebook [Part #1008989]
	Gateway M285-E SB Convertible Notebook [Part #1008990]
	Gateway M465-E Notebook [Part #1009022]
	Gateway CX2724 Convertible Notebook [Part #1009036]
	Gateway MX1025 Notebook [Part #1009046]
	Gateway CX2720 Convertible Notebook [Part #1009063]
	Gateway CX2724h Convertible Notebook [Part #1009089]
	Gateway MX1023 Notebook [Part #1009097]
	Gateway MX1023h Notebook [Part #1009098]
	Gateway NX260X Notebook [Part #1009112]
	Gateway E-100M Notebook [Part #1009126]
	Gateway MX7533 Notebook [Part #1009146] [Part #1009163]
	Gateway CX210X Convertible Notebook [Part #1009346]
	Gateway NX570X Notebook [Part #1009442]
	Gateway NX570X Notebook [Part #1009448]
	Gateway NX270S Notebook [Part #1009550]
	Gateway MX6448 Notebook [Part #1013912R]
	Gateway MX6453 Notebook [Part #1013913R]
	Gateway MX6216 Notebook [Part #1013916R]
	Gateway MX6931 Notebook [Part #1013918R]
	Gateway CX2726 Convertible Notebook [Part #1013921R]
	Gateway MP8708 Notebook [Part #1013924R]
	Gateway MX6446 Notebook [Part #1013927R]
	Gateway MX6930 Notebook [Part #1013928R]
	Gateway MX6447 Notebook [Part #1013932R]
	Gateway MX6454 Notebook [Part #1013943R]
	Gateway MX6439 Notebook [Part #1013947R] [Part #1013955R] [Part #1013971R]
	Gateway MX6930h Notebook [Part #1013973R] [Part #1013974R] [Part #1013975R]
	Gateway MX6955 Notebook [Part #1014028R]
	Gateway MX6956 Notebook [Part #1014033R]
	Gateway MX6959 Notebook [Part #1014061R]
	Gateway MX6957 Notebook [Part #1014065R]
	Gateway MX6960 Notebook [Part #1014068R]
	Gateway MX6958 Notebook [Part #1014072R]
	Gateway NX570X Notebook [Part #1014077R]
	Gateway NX570XL Notebook [Part #1014078R]
	Gateway NX570QS Notebook [Part #1014079R]
	Gateway MX6961 Notebook [Part #1014080R] [Part #1014106R]
	Gateway MX6961h Notebook [Part #1014112R]
	Gateway NX270S Notebook [Part #1014120R]
	Gateway MX6431 Notebook [Part #1014121R]
	Gateway MX8710 Notebook [Part #2905895R]
	Gateway MX3702 Notebook [Part #2905898R]
	Blade-K8F GW UMA Single Core Motherboard w/RS485M and 1394 - Quanta (FRU) [Part #4006133R]

Since some entries conflict with existing pinups, I'm providing a separate
patch to fix those entries.

Tested only with Gateway MX6453.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 89 +++++++++++++++++++++++++++++++---
 1 file changed, 81 insertions(+), 8 deletions(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 9e07f44ab28..e70ef050530 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -93,7 +93,13 @@ enum {
 
 enum {
 	STAC_925x_REF,
+	STAC_M1,
+	STAC_M1_2,
+	STAC_M2,
 	STAC_M2_2,
+	STAC_M3,
+	STAC_M5,
+	STAC_M6,
 	STAC_MA6,
 	STAC_PA6,
 	STAC_925x_MODELS
@@ -1600,11 +1606,40 @@ static unsigned int ref925x_pin_configs[8] = {
 	0x90a70320, 0x02214210, 0x01019020, 0x9033032e,
 };
 
+static unsigned int stac925xM1_pin_configs[8] = {
+	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+	0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
+};
+static unsigned int stac925xM1_2_pin_configs[8] = {
+	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+	0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
+};
+static unsigned int stac925xM2_pin_configs[8] = {
+	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+	0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
+};
+
+static unsigned int stac925xM3_pin_configs[8] = {
+	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+	0x40a000f0, 0x90100210, 0x400003f1, 0x503303f3,
+};
+static unsigned int stac925xM5_pin_configs[8] = {
+	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+	0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
+};
+
+/* Original M6 entry at .ini file */
+static unsigned int stac925xM6_pin_configs[8] = {
+	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+	0x40a000f0, 0x90100210, 0x400003f1, 0x90330320,
+};
+
 static unsigned int stac925x_MA6_pin_configs[8] = {
 	0x40c003f0, 0x424503f2, 0x01813022, 0x02a19021,
 	0x90a70320, 0x90100211, 0x400003f1, 0x9033032e,
 };
 
+/* This entry should be M2 */
 static unsigned int stac925x_PA6_pin_configs[8] = {
 	0x40c003f0, 0x424503f2, 0x01813022, 0x02a19021,
 	0x50a103f0, 0x90100211, 0x400003f1, 0x9033032e,
@@ -1617,27 +1652,55 @@ static unsigned int stac925xM2_2_pin_configs[8] = {
 
 static unsigned int *stac925x_brd_tbl[STAC_925x_MODELS] = {
 	[STAC_REF] = ref925x_pin_configs,
+	[STAC_M1] = stac925xM1_pin_configs,
+	[STAC_M1_2] = stac925xM1_2_pin_configs,
+	[STAC_M2] = stac925xM2_pin_configs,
 	[STAC_M2_2] = stac925xM2_2_pin_configs,
+	[STAC_M3] = stac925xM3_pin_configs,
+	[STAC_M5] = stac925xM5_pin_configs,
+	[STAC_M6] = stac925xM6_pin_configs,
 	[STAC_MA6] = stac925x_MA6_pin_configs,
 	[STAC_PA6] = stac925x_PA6_pin_configs,
 };
 
 static const char *stac925x_models[STAC_925x_MODELS] = {
 	[STAC_REF] = "ref",
+	[STAC_M1] = "m1",
+	[STAC_M1_2] = "m1-2",
+	[STAC_M2] = "m2",
 	[STAC_M2_2] = "m2-2",
-	[STAC_MA6] = "m6",
+	[STAC_M3] = "m3",
+	[STAC_M5] = "m5",
+	[STAC_M6] = "m6",
+	[STAC_MA6] = "ma6",
 	[STAC_PA6] = "pa6",
 };
 
-static struct snd_pci_quirk stac925x_cfg_tbl[] = {
-	/* SigmaTel reference board */
-	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_REF),
-	SND_PCI_QUIRK(0x8384, 0x7632, "Stac9202 Reference Board", STAC_REF),
+static struct snd_pci_quirk stac925x_codec_id_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x107b, 0x0316, "Gateway M255", STAC_REF),
 	SND_PCI_QUIRK(0x107b, 0x0366, "Gateway MP6954", STAC_REF),
+
 	SND_PCI_QUIRK(0x107b, 0x0461, "Gateway NX560XL", STAC_MA6),
 	SND_PCI_QUIRK(0x107b, 0x0681, "Gateway NX860", STAC_PA6),
-	SND_PCI_QUIRK(0x1002, 0x437b, "Gateway MX6453", STAC_M2_2),
+	SND_PCI_QUIRK(0x107b, 0x0367, "Gateway MX6453", STAC_M1_2),
+
+	/* Not sure about the brand name for those */
+	SND_PCI_QUIRK(0x107b, 0x0281, "Gateway mobile", STAC_M1),
+	SND_PCI_QUIRK(0x107b, 0x0507, "Gateway mobile", STAC_M3),
+	SND_PCI_QUIRK(0x107b, 0x0281, "Gateway mobile", STAC_M6),
+	SND_PCI_QUIRK(0x107b, 0x0685, "Gateway mobile", STAC_M2_2),
+
+	{} /* terminator */
+};
+
+static struct snd_pci_quirk stac925x_cfg_tbl[] = {
+	/* SigmaTel reference board */
+	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668, "DFI LanParty", STAC_REF),
+	SND_PCI_QUIRK(0x8384, 0x7632, "Stac9202 Reference Board", STAC_REF),
+
+	/* Default table for unknown ID */
+	SND_PCI_QUIRK(0x1002, 0x437b, "Gateway mobile", STAC_M2_2),
+
 	{} /* terminator */
 };
 
@@ -4371,12 +4434,22 @@ static int patch_stac925x(struct hda_codec *codec)
 	codec->spec = spec;
 	spec->num_pins = ARRAY_SIZE(stac925x_pin_nids);
 	spec->pin_nids = stac925x_pin_nids;
-	spec->board_config = snd_hda_check_board_config(codec, STAC_925x_MODELS,
+
+	/* Check first for codec ID */
+	spec->board_config = snd_hda_check_board_codec_sid_config(codec,
+							STAC_925x_MODELS,
+							stac925x_models,
+							stac925x_codec_id_cfg_tbl);
+
+	/* Now checks for PCI ID, if codec ID is not found */
+	if (spec->board_config < 0)
+		spec->board_config = snd_hda_check_board_config(codec,
+							STAC_925x_MODELS,
 							stac925x_models,
 							stac925x_cfg_tbl);
  again:
 	if (spec->board_config < 0) {
-		snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x," 
+		snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC925x,"
 				      "using BIOS defaults\n");
 		err = stac92xx_save_bios_config_regs(codec);
 	} else
-- 
GitLab


From 58eec4235d63e07b98544527e031e7ae807e15df Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Mon, 11 Aug 2008 10:18:39 +0200
Subject: [PATCH 003/492] ALSA: hda - More fixes on Gateway entries

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 72 ++++++++++++++++------------------
 1 file changed, 33 insertions(+), 39 deletions(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index e70ef050530..c05d4643afd 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -55,7 +55,8 @@ enum {
 	STAC_9200_DELL_M25,
 	STAC_9200_DELL_M26,
 	STAC_9200_DELL_M27,
-	STAC_9200_GATEWAY,
+	STAC_9200_M4,
+	STAC_9200_M4_2,
 	STAC_9200_PANASONIC,
 	STAC_9200_MODELS
 };
@@ -100,8 +101,6 @@ enum {
 	STAC_M3,
 	STAC_M5,
 	STAC_M6,
-	STAC_MA6,
-	STAC_PA6,
 	STAC_925x_MODELS
 };
 
@@ -1375,7 +1374,16 @@ static unsigned int ref9200_pin_configs[8] = {
 	0x02a19020, 0x01a19021, 0x90100140, 0x01813122,
 };
 
-/* 
+static unsigned int gateway9200_m4_pin_configs[8] = {
+	0x400000fe, 0x404500f4, 0x400100f0, 0x90110010,
+	0x400100f1, 0x02a1902e, 0x500000f2, 0x500000f3,
+};
+static unsigned int gateway9200_m4_2_pin_configs[8] = {
+	0x400000fe, 0x404500f4, 0x400100f0, 0x90110010,
+	0x400100f1, 0x02a1902e, 0x500000f2, 0x500000f3,
+};
+
+/*
     STAC 9200 pin configs for
     102801A8
     102801DE
@@ -1505,6 +1513,8 @@ static unsigned int *stac9200_brd_tbl[STAC_9200_MODELS] = {
 	[STAC_9200_DELL_M25] = dell9200_m25_pin_configs,
 	[STAC_9200_DELL_M26] = dell9200_m26_pin_configs,
 	[STAC_9200_DELL_M27] = dell9200_m27_pin_configs,
+	[STAC_9200_M4] = gateway9200_m4_pin_configs,
+	[STAC_9200_M4_2] = gateway9200_m4_2_pin_configs,
 	[STAC_9200_PANASONIC] = ref9200_pin_configs,
 };
 
@@ -1521,7 +1531,8 @@ static const char *stac9200_models[STAC_9200_MODELS] = {
 	[STAC_9200_DELL_M25] = "dell-m25",
 	[STAC_9200_DELL_M26] = "dell-m26",
 	[STAC_9200_DELL_M27] = "dell-m27",
-	[STAC_9200_GATEWAY] = "gateway",
+	[STAC_9200_M4] = "gateway-m4",
+	[STAC_9200_M4_2] = "gateway-m4-2",
 	[STAC_9200_PANASONIC] = "panasonic",
 };
 
@@ -1591,11 +1602,9 @@ static struct snd_pci_quirk stac9200_cfg_tbl[] = {
 	/* Panasonic */
 	SND_PCI_QUIRK(0x10f7, 0x8338, "Panasonic CF-74", STAC_9200_PANASONIC),
 	/* Gateway machines needs EAPD to be set on resume */
-	SND_PCI_QUIRK(0x107b, 0x0205, "Gateway S-7110M", STAC_9200_GATEWAY),
-	SND_PCI_QUIRK(0x107b, 0x0317, "Gateway MT3423, MX341*",
-		      STAC_9200_GATEWAY),
-	SND_PCI_QUIRK(0x107b, 0x0318, "Gateway ML3019, MT3707",
-		      STAC_9200_GATEWAY),
+	SND_PCI_QUIRK(0x107b, 0x0205, "Gateway S-7110M", STAC_9200_M4),
+	SND_PCI_QUIRK(0x107b, 0x0317, "Gateway MT3423, MX341*", STAC_9200_M4_2),
+	SND_PCI_QUIRK(0x107b, 0x0318, "Gateway ML3019, MT3707", STAC_9200_M4_2),
 	/* OQO Mobile */
 	SND_PCI_QUIRK(0x1106, 0x3288, "OQO Model 2", STAC_9200_OQO),
 	{} /* terminator */
@@ -1610,46 +1619,37 @@ static unsigned int stac925xM1_pin_configs[8] = {
 	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
 	0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
 };
+
 static unsigned int stac925xM1_2_pin_configs[8] = {
 	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
 	0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
 };
+
 static unsigned int stac925xM2_pin_configs[8] = {
 	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
 	0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
 };
 
+static unsigned int stac925xM2_2_pin_configs[8] = {
+	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
+	0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
+};
+
 static unsigned int stac925xM3_pin_configs[8] = {
 	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
 	0x40a000f0, 0x90100210, 0x400003f1, 0x503303f3,
 };
+
 static unsigned int stac925xM5_pin_configs[8] = {
 	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
 	0x40a000f0, 0x90100210, 0x400003f1, 0x9033032e,
 };
 
-/* Original M6 entry at .ini file */
 static unsigned int stac925xM6_pin_configs[8] = {
 	0x40c003f4, 0x424503f2, 0x400000f3, 0x02a19020,
 	0x40a000f0, 0x90100210, 0x400003f1, 0x90330320,
 };
 
-static unsigned int stac925x_MA6_pin_configs[8] = {
-	0x40c003f0, 0x424503f2, 0x01813022, 0x02a19021,
-	0x90a70320, 0x90100211, 0x400003f1, 0x9033032e,
-};
-
-/* This entry should be M2 */
-static unsigned int stac925x_PA6_pin_configs[8] = {
-	0x40c003f0, 0x424503f2, 0x01813022, 0x02a19021,
-	0x50a103f0, 0x90100211, 0x400003f1, 0x9033032e,
-};
-
-static unsigned int stac925xM2_2_pin_configs[8] = {
-	0x40c003f3, 0x424503f2, 0x04180011, 0x02a19020,
-	0x50a103f0, 0x90100212, 0x400003f1, 0x9033032e,
-};
-
 static unsigned int *stac925x_brd_tbl[STAC_925x_MODELS] = {
 	[STAC_REF] = ref925x_pin_configs,
 	[STAC_M1] = stac925xM1_pin_configs,
@@ -1659,8 +1659,6 @@ static unsigned int *stac925x_brd_tbl[STAC_925x_MODELS] = {
 	[STAC_M3] = stac925xM3_pin_configs,
 	[STAC_M5] = stac925xM5_pin_configs,
 	[STAC_M6] = stac925xM6_pin_configs,
-	[STAC_MA6] = stac925x_MA6_pin_configs,
-	[STAC_PA6] = stac925x_PA6_pin_configs,
 };
 
 static const char *stac925x_models[STAC_925x_MODELS] = {
@@ -1672,24 +1670,19 @@ static const char *stac925x_models[STAC_925x_MODELS] = {
 	[STAC_M3] = "m3",
 	[STAC_M5] = "m5",
 	[STAC_M6] = "m6",
-	[STAC_MA6] = "ma6",
-	[STAC_PA6] = "pa6",
 };
 
 static struct snd_pci_quirk stac925x_codec_id_cfg_tbl[] = {
-	SND_PCI_QUIRK(0x107b, 0x0316, "Gateway M255", STAC_REF),
-	SND_PCI_QUIRK(0x107b, 0x0366, "Gateway MP6954", STAC_REF),
-
-	SND_PCI_QUIRK(0x107b, 0x0461, "Gateway NX560XL", STAC_MA6),
-	SND_PCI_QUIRK(0x107b, 0x0681, "Gateway NX860", STAC_PA6),
+	SND_PCI_QUIRK(0x107b, 0x0316, "Gateway M255", STAC_M2),
+	SND_PCI_QUIRK(0x107b, 0x0366, "Gateway MP6954", STAC_M5),
+	SND_PCI_QUIRK(0x107b, 0x0461, "Gateway NX560XL", STAC_M1),
+	SND_PCI_QUIRK(0x107b, 0x0681, "Gateway NX860", STAC_M2),
 	SND_PCI_QUIRK(0x107b, 0x0367, "Gateway MX6453", STAC_M1_2),
-
 	/* Not sure about the brand name for those */
 	SND_PCI_QUIRK(0x107b, 0x0281, "Gateway mobile", STAC_M1),
 	SND_PCI_QUIRK(0x107b, 0x0507, "Gateway mobile", STAC_M3),
 	SND_PCI_QUIRK(0x107b, 0x0281, "Gateway mobile", STAC_M6),
 	SND_PCI_QUIRK(0x107b, 0x0685, "Gateway mobile", STAC_M2_2),
-
 	{} /* terminator */
 };
 
@@ -4399,7 +4392,8 @@ static int patch_stac9200(struct hda_codec *codec)
 	spec->num_adcs = 1;
 	spec->num_pwrs = 0;
 
-	if (spec->board_config == STAC_9200_GATEWAY ||
+	if (spec->board_config == STAC_9200_M4 ||
+	    spec->board_config == STAC_9200_M4_2 ||
 	    spec->board_config == STAC_9200_OQO)
 		spec->init = stac9200_eapd_init;
 	else
-- 
GitLab


From d5337debacc00591b3f81fc3c982b40af7de1ab6 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 7 Jan 2009 11:41:57 +0100
Subject: [PATCH 004/492] ALSA: hda - Add quirk for HP 2230s

Added a quirk for HP 2230s, model=laptop, with AD1984A codec.
Reference: Novell bnc#461660
	https://bugzilla.novell.com/show_bug.cgi?id=461660

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_analog.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 26247cfe749..13e4d910aa1 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3900,6 +3900,7 @@ static const char *ad1884a_models[AD1884A_MODELS] = {
 
 static struct snd_pci_quirk ad1884a_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x103c, 0x3030, "HP", AD1884A_MOBILE),
+	SND_PCI_QUIRK(0x103c, 0x3037, "HP 2230s", AD1884A_LAPTOP),
 	SND_PCI_QUIRK(0x103c, 0x3056, "HP", AD1884A_MOBILE),
 	SND_PCI_QUIRK(0x103c, 0x30e6, "HP 6730b", AD1884A_LAPTOP),
 	SND_PCI_QUIRK(0x103c, 0x30e7, "HP EliteBook 8530p", AD1884A_LAPTOP),
-- 
GitLab


From c247ed6f5205f9feebd276c4cbe45018b10f19fa Mon Sep 17 00:00:00 2001
From: Clemens Fruhwirth <clemens@endorphin.org>
Date: Wed, 7 Jan 2009 11:43:48 +0100
Subject: [PATCH 005/492] ALSA: hda - Fix typos for AD1882 codecs

Fixed typos of codec-id checks for AD1882/AD1882A.

Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_analog.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 13e4d910aa1..2e7371ec2e2 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -4263,13 +4263,13 @@ static int patch_ad1882(struct hda_codec *codec)
 	spec->num_adc_nids = ARRAY_SIZE(ad1882_adc_nids);
 	spec->adc_nids = ad1882_adc_nids;
 	spec->capsrc_nids = ad1882_capsrc_nids;
-	if (codec->vendor_id == 0x11d1882)
+	if (codec->vendor_id == 0x11d41882)
 		spec->input_mux = &ad1882_capture_source;
 	else
 		spec->input_mux = &ad1882a_capture_source;
 	spec->num_mixers = 2;
 	spec->mixers[0] = ad1882_base_mixers;
-	if (codec->vendor_id == 0x11d1882)
+	if (codec->vendor_id == 0x11d41882)
 		spec->mixers[1] = ad1882_loopback_mixers;
 	else
 		spec->mixers[1] = ad1882a_loopback_mixers;
-- 
GitLab


From e3d6ce6ff6e22ba35de77e306520779b384f0c38 Mon Sep 17 00:00:00 2001
From: Brian Hinz <bphinz@hotmail.com>
Date: Wed, 7 Jan 2009 11:49:56 +0100
Subject: [PATCH 006/492] ALSA: hda - Add codec ID for MCP73 HDMI

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_nvhdmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index 0270fda0bda..96952a37d88 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -162,12 +162,14 @@ static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
 	{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi },
 	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi },
 	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi },
+	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi },
 	{} /* terminator */
 };
 
 MODULE_ALIAS("snd-hda-codec-id:10de0002");
 MODULE_ALIAS("snd-hda-codec-id:10de0007");
 MODULE_ALIAS("snd-hda-codec-id:10de0067");
+MODULE_ALIAS("snd-hda-codec-id:10de8001");
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Nvidia HDMI HD-audio codec");
-- 
GitLab


From 1433fa7d8da608f59df1f6f381da00958bf5a0b7 Mon Sep 17 00:00:00 2001
From: Jason Jin <Jason.jin@freescale.com>
Date: Thu, 4 Dec 2008 19:14:28 +0800
Subject: [PATCH 007/492] powerpc: Fix the ide suspend function in uli1575

The general pci resume code can only restore part of the
configuration registers. We need to reconfigure those
registers in the FIXUP_RESUME.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/fsl_uli1575.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 8c619963bec..1db6b9e037f 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -249,6 +249,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 
 static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
 {
-- 
GitLab


From be122d6d8b836fec329d740e75bfbdffa96ff6ff Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 6 Jan 2009 10:23:37 -0600
Subject: [PATCH 008/492] powerpc/85xx: Fix PCIe error interrupts

The PCIe interrupts for 8544ds and 8572ds were incorrect.  The 8572 case
was found by Liu Yu.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8544ds.dts            | 4 ++--
 arch/powerpc/boot/dts/mpc8572ds.dts            | 4 ++--
 arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts | 2 +-
 arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts | 2 +-
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index b9da4210506..0668d104877 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -313,7 +313,7 @@
 			  0x1000000 0x0 0x0 0xe1010000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupts = <25 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -350,7 +350,7 @@
 			  0x1000000 0x0 0x0 0xe1020000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
+		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 21459e161d0..3dcc001b8ed 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -724,7 +724,7 @@
 			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupts = <25 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
@@ -761,7 +761,7 @@
 			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <27 2>;
+		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index c114c4ee993..fd462efa9e6 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -457,7 +457,7 @@
 			  0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <26 2>;
+		interrupts = <25 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index 04ecda18d20..e35230f2ac9 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -208,7 +208,7 @@
 			  0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
 		clock-frequency = <33333333>;
 		interrupt-parent = <&mpic>;
-		interrupts = <27 2>;
+		interrupts = <26 2>;
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
-- 
GitLab


From fdd4e8152f5f0d6d500b35515265e425acdfd203 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 6 Jan 2009 17:12:23 -0600
Subject: [PATCH 009/492] powerpc/qe: add Ethernet UPSMR definitions to QE
 library

Add the UCC_GETH_UPSMR_xxx definitions to qe.h.  The ucc_geth driver will
eventually use these instead of the UPSMR_ macros it currently defines.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/include/asm/qe.h | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index a0a15311d0d..2701753d993 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -624,7 +624,7 @@ struct ucc_slow_pram {
 #define UCC_GETH_UCCE_RXF1      0x00000002
 #define UCC_GETH_UCCE_RXF0      0x00000001
 
-/* UPSMR, when used as a UART */
+/* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
 #define UCC_UART_UPSMR_FLC		0x8000
 #define UCC_UART_UPSMR_SL		0x4000
 #define UCC_UART_UPSMR_CL_MASK		0x3000
@@ -652,6 +652,23 @@ struct ucc_slow_pram {
 #define UCC_UART_UPSMR_TPM_EVEN		0x0002
 #define UCC_UART_UPSMR_TPM_HIGH		0x0003
 
+/* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */
+#define UCC_GETH_UPSMR_FTFE     0x80000000
+#define UCC_GETH_UPSMR_PTPE     0x40000000
+#define UCC_GETH_UPSMR_ECM      0x04000000
+#define UCC_GETH_UPSMR_HSE      0x02000000
+#define UCC_GETH_UPSMR_PRO      0x00400000
+#define UCC_GETH_UPSMR_CAP      0x00200000
+#define UCC_GETH_UPSMR_RSH      0x00100000
+#define UCC_GETH_UPSMR_RPM      0x00080000
+#define UCC_GETH_UPSMR_R10M     0x00040000
+#define UCC_GETH_UPSMR_RLPB     0x00020000
+#define UCC_GETH_UPSMR_TBIM     0x00010000
+#define UCC_GETH_UPSMR_RES1     0x00002000
+#define UCC_GETH_UPSMR_RMM      0x00001000
+#define UCC_GETH_UPSMR_CAM      0x00000400
+#define UCC_GETH_UPSMR_BRO      0x00000200
+
 /* UCC Transmit On Demand Register (UTODR) */
 #define UCC_SLOW_TOD	0x8000
 #define UCC_FAST_TOD	0x8000
-- 
GitLab


From 7ddccb234ce1039f89387e0cec9c29dccf6e3476 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Wed, 7 Jan 2009 11:24:36 -0800
Subject: [PATCH 010/492] IB/ehca: spin_lock_irqsave() takes an unsigned long

The flags argument to spin_lock_irqsave() should really be unsigned
long.  This will also help prevent some warnings when we change u64 to
unsigned long long.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/ehca/ehca_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c
index 3b77b674cbf..c7b8a506af6 100644
--- a/drivers/infiniband/hw/ehca/ehca_main.c
+++ b/drivers/infiniband/hw/ehca/ehca_main.c
@@ -955,7 +955,7 @@ void ehca_poll_eqs(unsigned long data)
 			struct ehca_eq *eq = &shca->eq;
 			int max = 3;
 			volatile u64 q_ofs, q_ofs2;
-			u64 flags;
+			unsigned long flags;
 			spin_lock_irqsave(&eq->spinlock, flags);
 			q_ofs = eq->ipz_queue.current_q_offset;
 			spin_unlock_irqrestore(&eq->spinlock, flags);
-- 
GitLab


From a097a78c1e6e4030fcef3bcab6351b6001662335 Mon Sep 17 00:00:00 2001
From: Trent Piepho <tpiepho@freescale.com>
Date: Tue, 6 Jan 2009 22:37:53 -0600
Subject: [PATCH 011/492] powerpc/fsl-pci: Better ATMU setup for 85xx/86xx

The code that sets up the outbound ATMU windows, which is used to map CPU
physical addresses into PCI bus addresses where BARs will be mapped, didn't
work so well.

For one, it leaked the ioremap() of the ATMU registers.  Another small bug
was the high 20 bits of the PCI bus address were left as zero.  It's legal
for prefetchable memory regions to be above 32 bits, so the high 20 bits
might not be zero.

Mainly, it couldn't handle ranges that were not a power of two in size or
were not naturally aligned.  The ATMU windows have these requirements (size
& alignment), but the code didn't bother to check if the ranges it was
programming met them.  If they didn't, the windows would silently be
programmed incorrectly.

This new code can handle ranges which are not power of two sized nor
naturally aligned.  It simply splits the ranges into multiple valid ATMU
windows.  As there are only four windows, pooly aligned or sized ranges
(which didn't even work before) may run out of windows.  In this case an
error is printed and an effort is made to disable the unmapped resources.

An improvement that could be made would be to make use of the default
outbound window.  Iff hose->pci_mem_offset is zero, then it's possible that
some or all of the ranges might not need an outbound window and could just
use the default window.

The default ATMU window can support a pci_mem_offset less than zero too,
but pci_mem_offset is unsigned.  One could say the abilities allowed a
powerpc pci_controller is neither subset nor a superset of the abilities of
a Freescale PCIe controller.  Thankfully, the most useful bits are in the
intersection of the two abilities.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_pci.c | 104 +++++++++++++++++++++++-----------
 1 file changed, 71 insertions(+), 33 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index f611d0369cc..44bc903ead7 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -28,63 +28,101 @@
 #include <sysdev/fsl_pci.h>
 
 #if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
+static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
+	unsigned int index, const struct resource *res,
+	resource_size_t offset)
+{
+	resource_size_t pci_addr = res->start - offset;
+	resource_size_t phys_addr = res->start;
+	resource_size_t size = res->end - res->start + 1;
+	u32 flags = 0x80044000; /* enable & mem R/W */
+	unsigned int i;
+
+	pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
+		(u64)res->start, (u64)size);
+
+	for (i = 0; size > 0; i++) {
+		unsigned int bits = min(__ilog2(size),
+					__ffs(pci_addr | phys_addr));
+
+		if (index + i >= 5)
+			return -1;
+
+		out_be32(&pci->pow[index + i].potar, pci_addr >> 12);
+		out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44);
+		out_be32(&pci->pow[index + i].powbar, phys_addr >> 12);
+		out_be32(&pci->pow[index + i].powar, flags | (bits - 1));
+
+		pci_addr += (resource_size_t)1U << bits;
+		phys_addr += (resource_size_t)1U << bits;
+		size -= (resource_size_t)1U << bits;
+	}
+
+	return i;
+}
+
 /* atmu setup for fsl pci/pcie controller */
 static void __init setup_pci_atmu(struct pci_controller *hose,
 				  struct resource *rsrc)
 {
 	struct ccsr_pci __iomem *pci;
-	int i;
+	int i, j, n;
 
 	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
 		    (u64)rsrc->start, (u64)rsrc->end - (u64)rsrc->start + 1);
 	pci = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
+	if (!pci) {
+	    dev_err(hose->parent, "Unable to map ATMU registers\n");
+	    return;
+	}
 
-	/* Disable all windows (except powar0 since its ignored) */
+	/* Disable all windows (except powar0 since it's ignored) */
 	for(i = 1; i < 5; i++)
 		out_be32(&pci->pow[i].powar, 0);
 	for(i = 0; i < 3; i++)
 		out_be32(&pci->piw[i].piwar, 0);
 
 	/* Setup outbound MEM window */
-	for(i = 0; i < 3; i++)
-		if (hose->mem_resources[i].flags & IORESOURCE_MEM){
-			resource_size_t pci_addr_start =
-				 hose->mem_resources[i].start -
-				 hose->pci_mem_offset;
-			pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
-				(u64)hose->mem_resources[i].start,
-				(u64)hose->mem_resources[i].end
-				  - (u64)hose->mem_resources[i].start + 1);
-			out_be32(&pci->pow[i+1].potar, (pci_addr_start >> 12));
-			out_be32(&pci->pow[i+1].potear, 0);
-			out_be32(&pci->pow[i+1].powbar,
-				(hose->mem_resources[i].start >> 12));
-			/* Enable, Mem R/W */
-			out_be32(&pci->pow[i+1].powar, 0x80044000
-				| (__ilog2(hose->mem_resources[i].end
-				- hose->mem_resources[i].start + 1) - 1));
-		}
+	for(i = 0, j = 1; i < 3; i++) {
+		if (!(hose->mem_resources[i].flags & IORESOURCE_MEM))
+			continue;
+
+		n = setup_one_atmu(pci, j, &hose->mem_resources[i],
+				   hose->pci_mem_offset);
+
+		if (n < 0 || j >= 5) {
+			pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i);
+			hose->mem_resources[i].flags |= IORESOURCE_DISABLED;
+		} else
+			j += n;
+	}
 
 	/* Setup outbound IO window */
-	if (hose->io_resource.flags & IORESOURCE_IO){
-		pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
-			 "phy base 0x%016llx.\n",
-			(u64)hose->io_resource.start,
-			(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
-			(u64)hose->io_base_phys);
-		out_be32(&pci->pow[i+1].potar, (hose->io_resource.start >> 12));
-		out_be32(&pci->pow[i+1].potear, 0);
-		out_be32(&pci->pow[i+1].powbar, (hose->io_base_phys >> 12));
-		/* Enable, IO R/W */
-		out_be32(&pci->pow[i+1].powar, 0x80088000
-			| (__ilog2(hose->io_resource.end
-			- hose->io_resource.start + 1) - 1));
+	if (hose->io_resource.flags & IORESOURCE_IO) {
+		if (j >= 5) {
+			pr_err("Ran out of outbound PCI ATMUs for IO resource\n");
+		} else {
+			pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, "
+				 "phy base 0x%016llx.\n",
+				(u64)hose->io_resource.start,
+				(u64)hose->io_resource.end - (u64)hose->io_resource.start + 1,
+				(u64)hose->io_base_phys);
+			out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12));
+			out_be32(&pci->pow[j].potear, 0);
+			out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12));
+			/* Enable, IO R/W */
+			out_be32(&pci->pow[j].powar, 0x80088000
+				| (__ilog2(hose->io_resource.end
+				- hose->io_resource.start + 1) - 1));
+		}
 	}
 
 	/* Setup 2G inbound Memory Window @ 1 */
 	out_be32(&pci->piw[2].pitar, 0x00000000);
 	out_be32(&pci->piw[2].piwbar,0x00000000);
 	out_be32(&pci->piw[2].piwar, PIWAR_2G);
+
+	iounmap(pci);
 }
 
 static void __init setup_pci_cmd(struct pci_controller *hose)
-- 
GitLab


From 565f37642c78754a85efe6c20a4a15e18ed21f07 Mon Sep 17 00:00:00 2001
From: Trent Piepho <tpiepho@freescale.com>
Date: Wed, 17 Dec 2008 11:43:26 -0800
Subject: [PATCH 012/492] powerpc/fsl-pci: Set relaxed ordering on prefetchable
 ranges

Provides a small speedup when accessing pefetchable ranges.  To indicate
that a memory range is prefetchable, mark it in the dts file with 42000000
instead of 02000000.

A powepc pci_controller is allowed three memory ranges, any of which may be
prefetchable.  However, the PCI-PCI bridge configuration space only has one
field for "non-prefetchable memory behind bridge", which has a 32 bit
address, and one field for "prefetchable memory behind bridge", which may
have a 64 bit address.  These are PCI bus addresses, not CPU physical
addresses.

So really you're only allowed one memory range of each type.  And if you
want the range at a PCI address above 32 bits you must make it
prefetchable.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/fsl_pci.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 44bc903ead7..9817f63723d 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -41,6 +41,9 @@ static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
 	pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n",
 		(u64)res->start, (u64)size);
 
+	if (res->flags & IORESOURCE_PREFETCH)
+		flags |= 0x10000000; /* enable relaxed ordering */
+
 	for (i = 0; size > 0; i++) {
 		unsigned int bits = min(__ilog2(size),
 					__ffs(pci_addr | phys_addr));
-- 
GitLab


From 19f5465e823858a2f0b0e9a92e52816ba3ee70bb Mon Sep 17 00:00:00 2001
From: Trent Piepho <tpiepho@freescale.com>
Date: Mon, 8 Dec 2008 19:34:55 -0800
Subject: [PATCH 013/492] powerpc/fsl-booke: Don't hard-code size of struct
 tlbcam

Some assembly code in head_fsl_booke.S hard-coded the size of struct tlbcam
to 20 when it indexed the TLBCAM table.  Anyone changing the size of struct
tlbcam would not know to expect that.

The kernel already has a system to get the size of C structures into
assembly language files, asm-offsets, so let's use it.

The definition of the struct gets moved to a header, so that asm-offsets.c
can include it.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/kernel/asm-offsets.c    | 7 +++++++
 arch/powerpc/kernel/head_fsl_booke.S | 2 +-
 arch/powerpc/mm/fsl_booke_mmu.c      | 8 +-------
 arch/powerpc/mm/mmu_decl.h           | 9 +++++++++
 4 files changed, 18 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 661d07d2146..06958da94f1 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -56,6 +56,10 @@
 #include "head_booke.h"
 #endif
 
+#if defined(CONFIG_FSL_BOOKE)
+#include "../mm/mmu_decl.h"
+#endif
+
 int main(void)
 {
 	DEFINE(THREAD, offsetof(struct task_struct, thread));
@@ -384,6 +388,9 @@ int main(void)
 	DEFINE(PGD_T_LOG2, PGD_T_LOG2);
 	DEFINE(PTE_T_LOG2, PTE_T_LOG2);
 #endif
+#ifdef CONFIG_FSL_BOOKE
+	DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam));
+#endif
 
 	return 0;
 }
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 11b549acc03..805f28d30e4 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -909,7 +909,7 @@ KernelSPE:
 _GLOBAL(loadcam_entry)
 	lis	r4,TLBCAM@ha
 	addi	r4,r4,TLBCAM@l
-	mulli	r5,r3,20
+	mulli	r5,r3,TLBCAM_SIZE
 	add	r3,r5,r4
 	lwz	r4,0(r3)
 	mtspr	SPRN_MAS0,r4
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index 23cee39534f..c9ee59af100 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -61,13 +61,7 @@ static unsigned long __cam0, __cam1, __cam2;
 
 #define NUM_TLBCAMS	(16)
 
-struct tlbcam {
-   	u32	MAS0;
-	u32	MAS1;
-	u32	MAS2;
-	u32	MAS3;
-	u32	MAS7;
-} TLBCAM[NUM_TLBCAMS];
+struct tlbcam TLBCAM[NUM_TLBCAMS];
 
 struct tlbcamrange {
    	unsigned long start;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 4314b39b6fa..6f6ee62c2a0 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -75,6 +75,15 @@ extern void _tlbia(void);
 #endif /* CONFIG_PPC_MMU_NOHASH */
 
 #ifdef CONFIG_PPC32
+
+struct tlbcam {
+	u32	MAS0;
+	u32	MAS1;
+	u32	MAS2;
+	u32	MAS3;
+	u32	MAS7;
+};
+
 extern void mapin_ram(void);
 extern int map_page(unsigned long va, phys_addr_t pa, int flags);
 extern void setbat(int index, unsigned long virt, phys_addr_t phys,
-- 
GitLab


From 6fd8be4bf72879b3039654388e985cabf8449af5 Mon Sep 17 00:00:00 2001
From: Trent Piepho <tpiepho@freescale.com>
Date: Mon, 8 Dec 2008 19:34:56 -0800
Subject: [PATCH 014/492] powerpc/fsl-booke: Remove num_tlbcam_entries

This is a global variable defined in fsl_booke_mmu.c with a value that gets
initialized in assembly code in head_fsl_booke.S.

It's never used.

If some code ever does want to know the number of entries in TLB1, then
"numcams = mfspr(SPRN_TLB1CFG) & 0xfff", is a whole lot simpler than a
global initialized during kernel boot from assembly.

Signed-off-by: Trent Piepho <tpiepho@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/kernel/head_fsl_booke.S | 4 ----
 arch/powerpc/mm/fsl_booke_mmu.c      | 1 -
 arch/powerpc/mm/mmu_decl.h           | 2 --
 3 files changed, 7 deletions(-)

diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 805f28d30e4..2f32720a44a 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -389,10 +389,6 @@ skpinv:	addi	r6,r6,1				/* Increment */
 #endif
 #endif
 
-	mfspr	r3,SPRN_TLB1CFG
-	andi.	r3,r3,0xfff
-	lis	r4,num_tlbcam_entries@ha
-	stw	r3,num_tlbcam_entries@l(r4)
 /*
  * Decide what sort of machine this is and initialize the MMU.
  */
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c
index c9ee59af100..1971e4ee3d6 100644
--- a/arch/powerpc/mm/fsl_booke_mmu.c
+++ b/arch/powerpc/mm/fsl_booke_mmu.c
@@ -56,7 +56,6 @@
 
 extern void loadcam_entry(unsigned int index);
 unsigned int tlbcam_index;
-unsigned int num_tlbcam_entries;
 static unsigned long __cam0, __cam1, __cam2;
 
 #define NUM_TLBCAMS	(16)
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 6f6ee62c2a0..d0bb69dc627 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -99,8 +99,6 @@ extern unsigned int rtas_data, rtas_size;
 struct hash_pte;
 extern struct hash_pte *Hash, *Hash_end;
 extern unsigned long Hash_size, Hash_mask;
-
-extern unsigned int num_tlbcam_entries;
 #endif
 
 extern unsigned long ioremap_bot;
-- 
GitLab


From c9d557c19f94df42db78d4a5de4d25feee694bad Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Wed, 7 Jan 2009 14:33:30 -0800
Subject: [PATCH 015/492] rcu: fix bug in rcutorture system-shutdown code

This patch fixes an rcutorture bug found by Eric Sesterhenn that
resulted in oopses in response to "rmmod rcutorture".  The problem
was in some new code that attempted to handle the case where a system
is shut down while rcutorture is still running, for example, when
rcutorture is built into the kernel so that it cannot be removed.
The fix causes the rcutorture threads to "park" in an
schedule_timeout_uninterruptible(MAX_SCHEDULE_TIMEOUT) rather than
trying to get them to terminate cleanly.  Concurrent shutdown and
rmmod is illegal.

I believe that this is 2.6.29 material, as it is used in some testing
setups.

For reference, here are the rcutorture operating modes:

CONFIG_RCU_TORTURE_TEST=m

	This is the normal rcutorture build.  Use "modprobe rcutorture"
	(with optional arguments) to start, and "rmmod rcutorture" to
	stop.  If you shut the system down without doing the rmmod, you
	should see console output like:

	rcutorture thread rcu_torture_writer parking due to system shutdown

	One for each rcutorture kthread.

CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=n

	Use this if you want rcutorture built in, but don't want the
	test to start running during early boot.  To start the
	torturing:

		echo 1 > /proc/sys/kernel/rcutorture_runnable

	To stop the torturing, s/1/0/

	You will get "parking" console messages as noted above when
	you shut the system down.

CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_TORTURE_TEST_RUNNABLE=y

	Same as above, except that the torturing starts during early
	boot.  Only for the stout of heart and strong of stomach.
	The same /proc entry noted above may be used to control the
	test.

Located-by: Eric Sesterhenn <snakebyte@gmx.de>
Tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/rcutorture.c | 113 ++++++++++++++++++++++++++------------------
 1 file changed, 68 insertions(+), 45 deletions(-)

diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c
index 1cff28db56b..7c4142a79f0 100644
--- a/kernel/rcutorture.c
+++ b/kernel/rcutorture.c
@@ -136,28 +136,46 @@ static int stutter_pause_test = 0;
 #endif
 int rcutorture_runnable = RCUTORTURE_RUNNABLE_INIT;
 
-#define FULLSTOP_SHUTDOWN 1	/* Bail due to system shutdown/panic. */
-#define FULLSTOP_CLEANUP  2	/* Orderly shutdown. */
-static int fullstop;		/* stop generating callbacks at test end. */
-DEFINE_MUTEX(fullstop_mutex);	/* protect fullstop transitions and */
-				/*  spawning of kthreads. */
+/* Mediate rmmod and system shutdown.  Concurrent rmmod & shutdown illegal! */
+
+#define FULLSTOP_DONTSTOP 0	/* Normal operation. */
+#define FULLSTOP_SHUTDOWN 1	/* System shutdown with rcutorture running. */
+#define FULLSTOP_RMMOD    2	/* Normal rmmod of rcutorture. */
+static int fullstop = FULLSTOP_RMMOD;
+DEFINE_MUTEX(fullstop_mutex);	/* Protect fullstop transitions and spawning */
+				/*  of kthreads. */
 
 /*
- * Detect and respond to a signal-based shutdown.
+ * Detect and respond to a system shutdown.
  */
 static int
 rcutorture_shutdown_notify(struct notifier_block *unused1,
 			   unsigned long unused2, void *unused3)
 {
-	if (fullstop)
-		return NOTIFY_DONE;
 	mutex_lock(&fullstop_mutex);
-	if (!fullstop)
+	if (fullstop == FULLSTOP_DONTSTOP)
 		fullstop = FULLSTOP_SHUTDOWN;
+	else
+		printk(KERN_WARNING /* but going down anyway, so... */
+		       "Concurrent 'rmmod rcutorture' and shutdown illegal!\n");
 	mutex_unlock(&fullstop_mutex);
 	return NOTIFY_DONE;
 }
 
+/*
+ * Absorb kthreads into a kernel function that won't return, so that
+ * they won't ever access module text or data again.
+ */
+static void rcutorture_shutdown_absorb(char *title)
+{
+	if (ACCESS_ONCE(fullstop) == FULLSTOP_SHUTDOWN) {
+		printk(KERN_NOTICE
+		       "rcutorture thread %s parking due to system shutdown\n",
+		       title);
+		schedule_timeout_uninterruptible(MAX_SCHEDULE_TIMEOUT);
+	}
+}
+
 /*
  * Allocate an element from the rcu_tortures pool.
  */
@@ -219,13 +237,14 @@ rcu_random(struct rcu_random_state *rrsp)
 }
 
 static void
-rcu_stutter_wait(void)
+rcu_stutter_wait(char *title)
 {
-	while ((stutter_pause_test || !rcutorture_runnable) && !fullstop) {
+	while (stutter_pause_test || !rcutorture_runnable) {
 		if (rcutorture_runnable)
 			schedule_timeout_interruptible(1);
 		else
 			schedule_timeout_interruptible(round_jiffies_relative(HZ));
+		rcutorture_shutdown_absorb(title);
 	}
 }
 
@@ -287,7 +306,7 @@ rcu_torture_cb(struct rcu_head *p)
 	int i;
 	struct rcu_torture *rp = container_of(p, struct rcu_torture, rtort_rcu);
 
-	if (fullstop) {
+	if (fullstop != FULLSTOP_DONTSTOP) {
 		/* Test is ending, just drop callbacks on the floor. */
 		/* The next initialization will pick up the pieces. */
 		return;
@@ -619,10 +638,11 @@ rcu_torture_writer(void *arg)
 		}
 		rcu_torture_current_version++;
 		oldbatch = cur_ops->completed();
-		rcu_stutter_wait();
-	} while (!kthread_should_stop() && !fullstop);
+		rcu_stutter_wait("rcu_torture_writer");
+	} while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP);
 	VERBOSE_PRINTK_STRING("rcu_torture_writer task stopping");
-	while (!kthread_should_stop() && fullstop != FULLSTOP_SHUTDOWN)
+	rcutorture_shutdown_absorb("rcu_torture_writer");
+	while (!kthread_should_stop())
 		schedule_timeout_uninterruptible(1);
 	return 0;
 }
@@ -643,11 +663,12 @@ rcu_torture_fakewriter(void *arg)
 		schedule_timeout_uninterruptible(1 + rcu_random(&rand)%10);
 		udelay(rcu_random(&rand) & 0x3ff);
 		cur_ops->sync();
-		rcu_stutter_wait();
-	} while (!kthread_should_stop() && !fullstop);
+		rcu_stutter_wait("rcu_torture_fakewriter");
+	} while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP);
 
 	VERBOSE_PRINTK_STRING("rcu_torture_fakewriter task stopping");
-	while (!kthread_should_stop() && fullstop != FULLSTOP_SHUTDOWN)
+	rcutorture_shutdown_absorb("rcu_torture_fakewriter");
+	while (!kthread_should_stop())
 		schedule_timeout_uninterruptible(1);
 	return 0;
 }
@@ -752,12 +773,13 @@ rcu_torture_reader(void *arg)
 		preempt_enable();
 		cur_ops->readunlock(idx);
 		schedule();
-		rcu_stutter_wait();
-	} while (!kthread_should_stop() && !fullstop);
+		rcu_stutter_wait("rcu_torture_reader");
+	} while (!kthread_should_stop() && fullstop == FULLSTOP_DONTSTOP);
 	VERBOSE_PRINTK_STRING("rcu_torture_reader task stopping");
+	rcutorture_shutdown_absorb("rcu_torture_reader");
 	if (irqreader && cur_ops->irqcapable)
 		del_timer_sync(&t);
-	while (!kthread_should_stop() && fullstop != FULLSTOP_SHUTDOWN)
+	while (!kthread_should_stop())
 		schedule_timeout_uninterruptible(1);
 	return 0;
 }
@@ -854,7 +876,8 @@ rcu_torture_stats(void *arg)
 	do {
 		schedule_timeout_interruptible(stat_interval * HZ);
 		rcu_torture_stats_print();
-	} while (!kthread_should_stop() && !fullstop);
+		rcutorture_shutdown_absorb("rcu_torture_stats");
+	} while (!kthread_should_stop());
 	VERBOSE_PRINTK_STRING("rcu_torture_stats task stopping");
 	return 0;
 }
@@ -866,52 +889,49 @@ static int rcu_idle_cpu;	/* Force all torture tasks off this CPU */
  */
 static void rcu_torture_shuffle_tasks(void)
 {
-	cpumask_var_t tmp_mask;
+	cpumask_t tmp_mask;
 	int i;
 
-	if (!alloc_cpumask_var(&tmp_mask, GFP_KERNEL))
-		BUG();
-
-	cpumask_setall(tmp_mask);
+	cpus_setall(tmp_mask);
 	get_online_cpus();
 
 	/* No point in shuffling if there is only one online CPU (ex: UP) */
-	if (num_online_cpus() == 1)
-		goto out;
+	if (num_online_cpus() == 1) {
+		put_online_cpus();
+		return;
+	}
 
 	if (rcu_idle_cpu != -1)
-		cpumask_clear_cpu(rcu_idle_cpu, tmp_mask);
+		cpu_clear(rcu_idle_cpu, tmp_mask);
 
-	set_cpus_allowed_ptr(current, tmp_mask);
+	set_cpus_allowed_ptr(current, &tmp_mask);
 
 	if (reader_tasks) {
 		for (i = 0; i < nrealreaders; i++)
 			if (reader_tasks[i])
 				set_cpus_allowed_ptr(reader_tasks[i],
-						     tmp_mask);
+						     &tmp_mask);
 	}
 
 	if (fakewriter_tasks) {
 		for (i = 0; i < nfakewriters; i++)
 			if (fakewriter_tasks[i])
 				set_cpus_allowed_ptr(fakewriter_tasks[i],
-						     tmp_mask);
+						     &tmp_mask);
 	}
 
 	if (writer_task)
-		set_cpus_allowed_ptr(writer_task, tmp_mask);
+		set_cpus_allowed_ptr(writer_task, &tmp_mask);
 
 	if (stats_task)
-		set_cpus_allowed_ptr(stats_task, tmp_mask);
+		set_cpus_allowed_ptr(stats_task, &tmp_mask);
 
 	if (rcu_idle_cpu == -1)
 		rcu_idle_cpu = num_online_cpus() - 1;
 	else
 		rcu_idle_cpu--;
 
-out:
 	put_online_cpus();
-	free_cpumask_var(tmp_mask);
 }
 
 /* Shuffle tasks across CPUs, with the intent of allowing each CPU in the
@@ -925,7 +945,8 @@ rcu_torture_shuffle(void *arg)
 	do {
 		schedule_timeout_interruptible(shuffle_interval * HZ);
 		rcu_torture_shuffle_tasks();
-	} while (!kthread_should_stop() && !fullstop);
+		rcutorture_shutdown_absorb("rcu_torture_shuffle");
+	} while (!kthread_should_stop());
 	VERBOSE_PRINTK_STRING("rcu_torture_shuffle task stopping");
 	return 0;
 }
@@ -940,10 +961,11 @@ rcu_torture_stutter(void *arg)
 	do {
 		schedule_timeout_interruptible(stutter * HZ);
 		stutter_pause_test = 1;
-		if (!kthread_should_stop() && !fullstop)
+		if (!kthread_should_stop())
 			schedule_timeout_interruptible(stutter * HZ);
 		stutter_pause_test = 0;
-	} while (!kthread_should_stop() && !fullstop);
+		rcutorture_shutdown_absorb("rcu_torture_stutter");
+	} while (!kthread_should_stop());
 	VERBOSE_PRINTK_STRING("rcu_torture_stutter task stopping");
 	return 0;
 }
@@ -970,15 +992,16 @@ rcu_torture_cleanup(void)
 	int i;
 
 	mutex_lock(&fullstop_mutex);
-	if (!fullstop) {
-		/* If being signaled, let it happen, then exit. */
+	if (fullstop == FULLSTOP_SHUTDOWN) {
+		printk(KERN_WARNING /* but going down anyway, so... */
+		       "Concurrent 'rmmod rcutorture' and shutdown illegal!\n");
 		mutex_unlock(&fullstop_mutex);
-		schedule_timeout_interruptible(10 * HZ);
+		schedule_timeout_uninterruptible(10);
 		if (cur_ops->cb_barrier != NULL)
 			cur_ops->cb_barrier();
 		return;
 	}
-	fullstop = FULLSTOP_CLEANUP;
+	fullstop = FULLSTOP_RMMOD;
 	mutex_unlock(&fullstop_mutex);
 	unregister_reboot_notifier(&rcutorture_nb);
 	if (stutter_task) {
@@ -1078,7 +1101,7 @@ rcu_torture_init(void)
 	else
 		nrealreaders = 2 * num_online_cpus();
 	rcu_torture_print_module_parms("Start of test");
-	fullstop = 0;
+	fullstop = FULLSTOP_DONTSTOP;
 
 	/* Set up the freelist. */
 
-- 
GitLab


From a8e4f9ddea4a23705d4eea6afe4a01e1a57a0621 Mon Sep 17 00:00:00 2001
From: Lukasz Wojnilowicz <lukasz.wojnilowicz@gmail.com>
Date: Thu, 8 Jan 2009 12:00:49 +0100
Subject: [PATCH 016/492] ALSA: hda - Add quirks for Acer Aspire 5930G and
 6930G

This is a patch which adds correct auto detection of model for
snd-hda-intel for Acer Aspire 5930G and 6930G. Tested on my 5930G. It
finally adds hp jack sense and 5.1 speaker system sliders.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 9065ebf9c06..ad23dc3a180 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8461,6 +8461,10 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x0121, "Acer Aspire 5920G", ALC883_ACER_ASPIRE),
 	SND_PCI_QUIRK(0x1025, 0x013e, "Acer Aspire 4930G",
 		ALC888_ACER_ASPIRE_4930G),
+	SND_PCI_QUIRK(0x1025, 0x013f, "Acer Aspire 5930G",
+		ALC888_ACER_ASPIRE_4930G),
+	SND_PCI_QUIRK(0x1025, 0x015e, "Acer Aspire 6930G",
+		ALC888_ACER_ASPIRE_4930G),
 	SND_PCI_QUIRK(0x1025, 0, "Acer laptop", ALC883_ACER), /* default Acer */
 	SND_PCI_QUIRK(0x1028, 0x020d, "Dell Inspiron 530", ALC888_6ST_DELL),
 	SND_PCI_QUIRK(0x103c, 0x2a3d, "HP Pavillion", ALC883_6ST_DIG),
-- 
GitLab


From 741555568f8ba307c626019787c412f4386cafdc Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Thu, 8 Jan 2009 13:34:29 +0200
Subject: [PATCH 017/492] ASoC: Merge the soc_value_enum to soc_enum struct

Merge the recently introduced soc_value_enum structure to the soc_enum.
The value based enums are still handled separately from the normal enum types,
but with the merge some of the newly introduced functions can be removed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 include/sound/soc-dapm.h |  2 +-
 include/sound/soc.h      | 15 +-------
 sound/soc/soc-core.c     | 37 +------------------
 sound/soc/soc-dapm.c     | 80 +++-------------------------------------
 4 files changed, 9 insertions(+), 125 deletions(-)

diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h
index 4af1083e328..93a4edb148b 100644
--- a/include/sound/soc-dapm.h
+++ b/include/sound/soc-dapm.h
@@ -178,7 +178,7 @@
   	.private_value = (unsigned long)&xenum }
 #define SOC_DAPM_VALUE_ENUM(xname, xenum) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
-	.info = snd_soc_info_value_enum_double, \
+	.info = snd_soc_info_enum_double, \
 	.get = snd_soc_dapm_get_value_enum_double, \
 	.put = snd_soc_dapm_put_value_enum_double, \
 	.private_value = (unsigned long)&xenum }
diff --git a/include/sound/soc.h b/include/sound/soc.h
index 9b930d34211..24593ac3ea1 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -106,7 +106,7 @@
 	.private_value = (unsigned long)&xenum }
 #define SOC_VALUE_ENUM(xname, xenum) \
 {	.iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname,\
-	.info = snd_soc_info_value_enum_double, \
+	.info = snd_soc_info_enum_double, \
 	.get = snd_soc_get_value_enum_double, \
 	.put = snd_soc_put_value_enum_double, \
 	.private_value = (unsigned long)&xenum }
@@ -211,8 +211,6 @@ int snd_soc_get_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
 int snd_soc_put_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
-int snd_soc_info_value_enum_double(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_info *uinfo);
 int snd_soc_get_value_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol);
 int snd_soc_put_value_enum_double(struct snd_kcontrol *kcontrol,
@@ -414,17 +412,6 @@ struct soc_mixer_control {
 
 /* enumerated kcontrol */
 struct soc_enum {
-	unsigned short reg;
-	unsigned short reg2;
-	unsigned char shift_l;
-	unsigned char shift_r;
-	unsigned int max;
-	const char **texts;
-	void *dapm;
-};
-
-/* semi enumerated kcontrol */
-struct soc_value_enum {
 	unsigned short reg;
 	unsigned short reg2;
 	unsigned char shift_l;
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 6cbe7e82f23..55fdb4abb17 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -1584,37 +1584,6 @@ int snd_soc_put_enum_double(struct snd_kcontrol *kcontrol,
 }
 EXPORT_SYMBOL_GPL(snd_soc_put_enum_double);
 
-/**
- * snd_soc_info_value_enum_double - semi enumerated double mixer info callback
- * @kcontrol: mixer control
- * @uinfo: control element information
- *
- * Callback to provide information about a double semi enumerated
- * mixer control.
- *
- * Semi enumerated mixer: the enumerated items are referred as values. Can be
- * used for handling bitfield coded enumeration for example.
- *
- * Returns 0 for success.
- */
-int snd_soc_info_value_enum_double(struct snd_kcontrol *kcontrol,
-	struct snd_ctl_elem_info *uinfo)
-{
-	struct soc_value_enum *e = (struct soc_value_enum *)
-			kcontrol->private_value;
-
-	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
-	uinfo->count = e->shift_l == e->shift_r ? 1 : 2;
-	uinfo->value.enumerated.items = e->max;
-
-	if (uinfo->value.enumerated.item > e->max - 1)
-		uinfo->value.enumerated.item = e->max - 1;
-	strcpy(uinfo->value.enumerated.name,
-		e->texts[uinfo->value.enumerated.item]);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(snd_soc_info_value_enum_double);
-
 /**
  * snd_soc_get_value_enum_double - semi enumerated double mixer get callback
  * @kcontrol: mixer control
@@ -1631,8 +1600,7 @@ int snd_soc_get_value_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct soc_value_enum *e = (struct soc_value_enum *)
-			kcontrol->private_value;
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
 	unsigned short reg_val, val, mux;
 
 	reg_val = snd_soc_read(codec, e->reg);
@@ -1671,8 +1639,7 @@ int snd_soc_put_value_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-	struct soc_value_enum *e = (struct soc_value_enum *)
-			kcontrol->private_value;
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
 	unsigned short val;
 	unsigned short mask;
 
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index ad0d801677c..493a4e8aa27 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -137,7 +137,7 @@ static void dapm_set_path_status(struct snd_soc_dapm_widget *w,
 	}
 	break;
 	case snd_soc_dapm_value_mux: {
-		struct soc_value_enum *e = (struct soc_value_enum *)
+		struct soc_enum *e = (struct soc_enum *)
 			w->kcontrols[i].private_value;
 		int val, item;
 
@@ -200,30 +200,6 @@ static int dapm_connect_mux(struct snd_soc_codec *codec,
 	return -ENODEV;
 }
 
-/* connect value_mux widget to it's interconnecting audio paths */
-static int dapm_connect_value_mux(struct snd_soc_codec *codec,
-	struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
-	struct snd_soc_dapm_path *path, const char *control_name,
-	const struct snd_kcontrol_new *kcontrol)
-{
-	struct soc_value_enum *e = (struct soc_value_enum *)
-			kcontrol->private_value;
-	int i;
-
-	for (i = 0; i < e->max; i++) {
-		if (!(strcmp(control_name, e->texts[i]))) {
-			list_add(&path->list, &codec->dapm_paths);
-			list_add(&path->list_sink, &dest->sources);
-			list_add(&path->list_source, &src->sinks);
-			path->name = (char *)e->texts[i];
-			dapm_set_path_status(dest, path, 0);
-			return 0;
-		}
-	}
-
-	return -ENODEV;
-}
-
 /* connect mixer widget to it's interconnecting audio paths */
 static int dapm_connect_mixer(struct snd_soc_codec *codec,
 	struct snd_soc_dapm_widget *src, struct snd_soc_dapm_widget *dest,
@@ -774,45 +750,6 @@ static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget,
 	return 0;
 }
 
-/* test and update the power status of a value_mux widget */
-static int dapm_value_mux_update_power(struct snd_soc_dapm_widget *widget,
-				 struct snd_kcontrol *kcontrol, int mask,
-				 int mux, int val, struct soc_value_enum *e)
-{
-	struct snd_soc_dapm_path *path;
-	int found = 0;
-
-	if (widget->id != snd_soc_dapm_value_mux)
-		return -ENODEV;
-
-	if (!snd_soc_test_bits(widget->codec, e->reg, mask, val))
-		return 0;
-
-	/* find dapm widget path assoc with kcontrol */
-	list_for_each_entry(path, &widget->codec->dapm_paths, list) {
-		if (path->kcontrol != kcontrol)
-			continue;
-
-		if (!path->name || !e->texts[mux])
-			continue;
-
-		found = 1;
-		/* we now need to match the string in the enum to the path */
-		if (!(strcmp(path->name, e->texts[mux])))
-			path->connect = 1; /* new connection */
-		else
-			path->connect = 0; /* old connection must be
-					      powered down */
-	}
-
-	if (found) {
-		dapm_power_widgets(widget->codec, SND_SOC_DAPM_STREAM_NOP);
-		dump_dapm(widget->codec, "mux power update");
-	}
-
-	return 0;
-}
-
 /* test and update the power status of a mixer or switch widget */
 static int dapm_mixer_update_power(struct snd_soc_dapm_widget *widget,
 				   struct snd_kcontrol *kcontrol, int reg,
@@ -1045,17 +982,12 @@ static int snd_soc_dapm_add_route(struct snd_soc_codec *codec,
 		path->connect = 1;
 		return 0;
 	case snd_soc_dapm_mux:
+	case snd_soc_dapm_value_mux:
 		ret = dapm_connect_mux(codec, wsource, wsink, path, control,
 			&wsink->kcontrols[0]);
 		if (ret != 0)
 			goto err;
 		break;
-	case snd_soc_dapm_value_mux:
-		ret = dapm_connect_value_mux(codec, wsource, wsink, path,
-			control, &wsink->kcontrols[0]);
-		if (ret != 0)
-			goto err;
-		break;
 	case snd_soc_dapm_switch:
 	case snd_soc_dapm_mixer:
 		ret = dapm_connect_mixer(codec, wsource, wsink, path, control);
@@ -1382,8 +1314,7 @@ int snd_soc_dapm_get_value_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
-	struct soc_value_enum *e = (struct soc_value_enum *)
-			kcontrol->private_value;
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
 	unsigned short reg_val, val, mux;
 
 	reg_val = snd_soc_read(widget->codec, e->reg);
@@ -1423,8 +1354,7 @@ int snd_soc_dapm_put_value_enum_double(struct snd_kcontrol *kcontrol,
 	struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_soc_dapm_widget *widget = snd_kcontrol_chip(kcontrol);
-	struct soc_value_enum *e = (struct soc_value_enum *)
-			kcontrol->private_value;
+	struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
 	unsigned short val, mux;
 	unsigned short mask;
 	int ret = 0;
@@ -1443,7 +1373,7 @@ int snd_soc_dapm_put_value_enum_double(struct snd_kcontrol *kcontrol,
 
 	mutex_lock(&widget->codec->mutex);
 	widget->value = val;
-	dapm_value_mux_update_power(widget, kcontrol, mask, mux, val, e);
+	dapm_mux_update_power(widget, kcontrol, mask, mux, val, e);
 	if (widget->event) {
 		if (widget->event_flags & SND_SOC_DAPM_PRE_REG) {
 			ret = widget->event(widget,
-- 
GitLab


From cb1ace04d7797db21cb5a746ac0e0fc81d526060 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Thu, 8 Jan 2009 13:34:30 +0200
Subject: [PATCH 018/492] ASoC: TWL4030: Change the soc_value_enum back to
 soc_enum

The soc_value_enum has been merged to soc_enum.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/twl4030.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index fd0f338374a..db24f833c16 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -197,7 +197,7 @@ static const char *twl4030_earpiece_texts[] =
 static const unsigned int twl4030_earpiece_values[] =
 		{0x0, 0x1, 0x2, 0x4};
 
-static const struct soc_value_enum twl4030_earpiece_enum =
+static const struct soc_enum twl4030_earpiece_enum =
 	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_EAR_CTL, 1, 0x7,
 			ARRAY_SIZE(twl4030_earpiece_texts),
 			twl4030_earpiece_texts,
@@ -213,7 +213,7 @@ static const char *twl4030_predrivel_texts[] =
 static const unsigned int twl4030_predrivel_values[] =
 		{0x0, 0x1, 0x2, 0x4};
 
-static const struct soc_value_enum twl4030_predrivel_enum =
+static const struct soc_enum twl4030_predrivel_enum =
 	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDL_CTL, 1, 0x7,
 			ARRAY_SIZE(twl4030_predrivel_texts),
 			twl4030_predrivel_texts,
@@ -229,7 +229,7 @@ static const char *twl4030_predriver_texts[] =
 static const unsigned int twl4030_predriver_values[] =
 		{0x0, 0x1, 0x2, 0x4};
 
-static const struct soc_value_enum twl4030_predriver_enum =
+static const struct soc_enum twl4030_predriver_enum =
 	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDR_CTL, 1, 0x7,
 			ARRAY_SIZE(twl4030_predriver_texts),
 			twl4030_predriver_texts,
@@ -317,7 +317,7 @@ static const char *twl4030_analoglmic_texts[] =
 static const unsigned int twl4030_analoglmic_values[] =
 		{0x0, 0x1, 0x2, 0x4, 0x8};
 
-static const struct soc_value_enum twl4030_analoglmic_enum =
+static const struct soc_enum twl4030_analoglmic_enum =
 	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICL, 0, 0xf,
 			ARRAY_SIZE(twl4030_analoglmic_texts),
 			twl4030_analoglmic_texts,
@@ -333,7 +333,7 @@ static const char *twl4030_analogrmic_texts[] =
 static const unsigned int twl4030_analogrmic_values[] =
 		{0x0, 0x1, 0x4};
 
-static const struct soc_value_enum twl4030_analogrmic_enum =
+static const struct soc_enum twl4030_analogrmic_enum =
 	SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICR, 0, 0x5,
 			ARRAY_SIZE(twl4030_analogrmic_texts),
 			twl4030_analogrmic_texts,
-- 
GitLab


From f3f80a9205da74fa56d613f4c14b88b6e4e6caa8 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 8 Jan 2009 15:32:56 +0100
Subject: [PATCH 019/492] ALSA: caiaq - Fix Oops with MIDI

The snd-usb-caiaq driver causes Oops occasionally when accessing MIDI
devices.  This patch fixes the Oops and invalid URB submission errors
as well.

Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/caiaq/caiaq-device.h |  1 +
 sound/usb/caiaq/caiaq-midi.c   | 32 ++++++++++++++++++--------------
 2 files changed, 19 insertions(+), 14 deletions(-)

diff --git a/sound/usb/caiaq/caiaq-device.h b/sound/usb/caiaq/caiaq-device.h
index f9fbdbae269..ab56e738c5f 100644
--- a/sound/usb/caiaq/caiaq-device.h
+++ b/sound/usb/caiaq/caiaq-device.h
@@ -75,6 +75,7 @@ struct snd_usb_caiaqdev {
 	wait_queue_head_t ep1_wait_queue;
 	wait_queue_head_t prepare_wait_queue;
 	int spec_received, audio_parm_answer;
+	int midi_out_active;
 
 	char vendor_name[CAIAQ_USB_STR_LEN];
 	char product_name[CAIAQ_USB_STR_LEN];
diff --git a/sound/usb/caiaq/caiaq-midi.c b/sound/usb/caiaq/caiaq-midi.c
index 30b57f97c6e..f19fd360c93 100644
--- a/sound/usb/caiaq/caiaq-midi.c
+++ b/sound/usb/caiaq/caiaq-midi.c
@@ -59,6 +59,11 @@ static int snd_usb_caiaq_midi_output_open(struct snd_rawmidi_substream *substrea
 
 static int snd_usb_caiaq_midi_output_close(struct snd_rawmidi_substream *substream)
 {
+	struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
+	if (dev->midi_out_active) {
+		usb_kill_urb(&dev->midi_out_urb);
+		dev->midi_out_active = 0;
+	}
 	return 0;
 }
 
@@ -69,7 +74,8 @@ static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
 	
 	dev->midi_out_buf[0] = EP1_CMD_MIDI_WRITE;
 	dev->midi_out_buf[1] = 0; /* port */
-	len = snd_rawmidi_transmit_peek(substream, dev->midi_out_buf+3, EP1_BUFSIZE-3);
+	len = snd_rawmidi_transmit(substream, dev->midi_out_buf + 3,
+				   EP1_BUFSIZE - 3);
 	
 	if (len <= 0)
 		return;
@@ -79,24 +85,24 @@ static void snd_usb_caiaq_midi_send(struct snd_usb_caiaqdev *dev,
 	
 	ret = usb_submit_urb(&dev->midi_out_urb, GFP_ATOMIC);
 	if (ret < 0)
-		log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed, %d\n",
-				substream, ret);
+		log("snd_usb_caiaq_midi_send(%p): usb_submit_urb() failed,"
+		    "ret=%d, len=%d\n",
+		    substream, ret, len);
+	else
+		dev->midi_out_active = 1;
 }
 
 static void snd_usb_caiaq_midi_output_trigger(struct snd_rawmidi_substream *substream, int up)
 {
 	struct snd_usb_caiaqdev *dev = substream->rmidi->private_data;
 	
-	if (dev->midi_out_substream != NULL)
-		return;
-	
-	if (!up) {
+	if (up) {
+		dev->midi_out_substream = substream;
+		if (!dev->midi_out_active)
+			snd_usb_caiaq_midi_send(dev, substream);
+	} else {
 		dev->midi_out_substream = NULL;
-		return;
 	}
-	
-	dev->midi_out_substream = substream;
-	snd_usb_caiaq_midi_send(dev, substream);
 }
 
 
@@ -161,16 +167,14 @@ int snd_usb_caiaq_midi_init(struct snd_usb_caiaqdev *device)
 void snd_usb_caiaq_midi_output_done(struct urb* urb)
 {
 	struct snd_usb_caiaqdev *dev = urb->context;
-      	char *buf = urb->transfer_buffer;
 	
+	dev->midi_out_active = 0;
 	if (urb->status != 0)
 		return;
 
 	if (!dev->midi_out_substream)
 		return;
 
-	snd_rawmidi_transmit_ack(dev->midi_out_substream, buf[2]);
-	dev->midi_out_substream = NULL;
 	snd_usb_caiaq_midi_send(dev, dev->midi_out_substream);
 }
 
-- 
GitLab


From 57d139278e6c246d78f71e4bf0e0d15bb0390646 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 8 Jan 2009 15:52:09 +0100
Subject: [PATCH 020/492] ALSA: hda - Add quirk for Dell Inspiron Mini9

Added a quirk, model=dell, for Dell Inspiron Mini9 with ALC268 codec.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ad23dc3a180..e8ec7417352 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -11693,6 +11693,7 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One",
 						ALC268_ACER_ASPIRE_ONE),
 	SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
+	SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL),
 	SND_PCI_QUIRK(0x103c, 0x30cc, "TOSHIBA", ALC268_TOSHIBA),
 	SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
 	SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
-- 
GitLab


From 79f3b3cb7a2586b319a43a7f29924c6c555e4357 Mon Sep 17 00:00:00 2001
From: Kyle McMartin <kyle@redhat.com>
Date: Thu, 8 Jan 2009 10:04:30 -0500
Subject: [PATCH 021/492] x86, mtrr: fix types used in userspace exported
 header

Commit 932d27a7913fc6b3c64c6e6082628b0a1561dec9 exported some mtrr
structures without using the exportable __uX types, causing userspace
build failures.

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mtrr.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/mtrr.h b/arch/x86/include/asm/mtrr.h
index cb988aab716..14080d22edb 100644
--- a/arch/x86/include/asm/mtrr.h
+++ b/arch/x86/include/asm/mtrr.h
@@ -58,15 +58,15 @@ struct mtrr_gentry {
 #endif /* !__i386__ */
 
 struct mtrr_var_range {
-	u32 base_lo;
-	u32 base_hi;
-	u32 mask_lo;
-	u32 mask_hi;
+	__u32 base_lo;
+	__u32 base_hi;
+	__u32 mask_lo;
+	__u32 mask_hi;
 };
 
 /* In the Intel processor's MTRR interface, the MTRR type is always held in
    an 8 bit field: */
-typedef u8 mtrr_type;
+typedef __u8 mtrr_type;
 
 #define MTRR_NUM_FIXED_RANGES 88
 #define MTRR_MAX_VAR_RANGES 256
-- 
GitLab


From e8dc7c4882fd7629d8cf75a2a7b206d478dd0882 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Thu, 8 Jan 2009 11:37:19 -0800
Subject: [PATCH 022/492] sparc64: fix warnings in psycho_common after ull
 conversion

After conversion to use unsigned long long for u64
I saw following warnings:

  CC      arch/sparc/kernel/psycho_common.o
arch/sparc/kernel/psycho_common.c: In function `psycho_check_stc_error':
arch/sparc/kernel/psycho_common.c:104: warning: long long unsigned int format, long unsigned int arg (arg 4)
arch/sparc/kernel/psycho_common.c:104: warning: long long unsigned int format, long unsigned int arg (arg 5)
arch/sparc/kernel/psycho_common.c:114: warning: long long unsigned int format, long unsigned int arg (arg 4)
arch/sparc/kernel/psycho_common.c:114: warning: long long unsigned int format, long unsigned int arg (arg 5)
arch/sparc/kernel/psycho_common.c:114: warning: long long unsigned int format, long unsigned int arg (arg 6)
arch/sparc/kernel/psycho_common.c:114: warning: long long unsigned int format, long unsigned int arg (arg 7)
arch/sparc/kernel/psycho_common.c: In function `psycho_dump_iommu_tags_and_data':
arch/sparc/kernel/psycho_common.c:187: warning: long long unsigned int format, long unsigned int arg (arg 8)
arch/sparc/kernel/psycho_common.c:193: warning: long long unsigned int format, long unsigned int arg (arg 6)
arch/sparc/kernel/psycho_common.c: In function `psycho_pcierr_intr':
arch/sparc/kernel/psycho_common.c:333: warning: long long unsigned int format, long unsigned int arg (arg 3)
arch/sparc/kernel/psycho_common.c:333: warning: long long unsigned int format, long unsigned int arg (arg 4)

This is due to different integer promotion in my 32 bit hosted gcc.
The fix is to force a few constants to ULL.

The following stands out from the rest:
+#define  PSYCHO_IOMMU_TAG_VPAGE         0x7ffffULL
+#define  PSYCHO_IOMMU_DATA_PPAGE 0xfffffffULL

They were needed otherwise the expression:

    (data_val & PSYCHO_IOMMU_DATA_PPAGE) << IOMMU_PAGE_SHIFT)

were promoted to a unsigned long and not a unsigned long long as expected.

I tried the alternative solution and made IOMMU_PAGE_SHIFT an ULL but that did not help.
The only way gcc would make this expression an unsigned long long was to
define PSYCHO_IOMMU_DATA_PPAGE as ULL. The alternative to add a cast was
not considered a valid solution.

We had this issue in two places and this were the only places the above
two constants are used.

A small coding style diff sneaked in too.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/psycho_common.c | 60 +++++++++++++++----------------
 1 file changed, 30 insertions(+), 30 deletions(-)

diff --git a/arch/sparc/kernel/psycho_common.c b/arch/sparc/kernel/psycho_common.c
index 40689ae3c9b..8f147847542 100644
--- a/arch/sparc/kernel/psycho_common.c
+++ b/arch/sparc/kernel/psycho_common.c
@@ -11,19 +11,19 @@
 #include "iommu_common.h"
 #include "psycho_common.h"
 
-#define  PSYCHO_STRBUF_CTRL_DENAB	0x0000000000000002UL
-#define  PSYCHO_STCERR_WRITE		0x0000000000000002UL
-#define  PSYCHO_STCERR_READ		0x0000000000000001UL
-#define  PSYCHO_STCTAG_PPN		0x0fffffff00000000UL
-#define  PSYCHO_STCTAG_VPN		0x00000000ffffe000UL
-#define  PSYCHO_STCTAG_VALID		0x0000000000000002UL
-#define  PSYCHO_STCTAG_WRITE		0x0000000000000001UL
-#define  PSYCHO_STCLINE_LINDX		0x0000000001e00000UL
-#define  PSYCHO_STCLINE_SPTR		0x00000000001f8000UL
-#define  PSYCHO_STCLINE_LADDR		0x0000000000007f00UL
-#define  PSYCHO_STCLINE_EPTR		0x00000000000000fcUL
-#define  PSYCHO_STCLINE_VALID		0x0000000000000002UL
-#define  PSYCHO_STCLINE_FOFN		0x0000000000000001UL
+#define  PSYCHO_STRBUF_CTRL_DENAB	0x0000000000000002ULL
+#define  PSYCHO_STCERR_WRITE		0x0000000000000002ULL
+#define  PSYCHO_STCERR_READ		0x0000000000000001ULL
+#define  PSYCHO_STCTAG_PPN		0x0fffffff00000000ULL
+#define  PSYCHO_STCTAG_VPN		0x00000000ffffe000ULL
+#define  PSYCHO_STCTAG_VALID		0x0000000000000002ULL
+#define  PSYCHO_STCTAG_WRITE		0x0000000000000001ULL
+#define  PSYCHO_STCLINE_LINDX		0x0000000001e00000ULL
+#define  PSYCHO_STCLINE_SPTR		0x00000000001f8000ULL
+#define  PSYCHO_STCLINE_LADDR		0x0000000000007f00ULL
+#define  PSYCHO_STCLINE_EPTR		0x00000000000000fcULL
+#define  PSYCHO_STCLINE_VALID		0x0000000000000002ULL
+#define  PSYCHO_STCLINE_FOFN		0x0000000000000001ULL
 
 static DEFINE_SPINLOCK(stc_buf_lock);
 static unsigned long stc_error_buf[128];
@@ -144,10 +144,10 @@ static void psycho_record_iommu_tags_and_data(struct pci_pbm_info *pbm,
 #define  PSYCHO_IOMMU_TAG_WRITE	 (0x1UL << 21UL)
 #define  PSYCHO_IOMMU_TAG_STREAM (0x1UL << 20UL)
 #define  PSYCHO_IOMMU_TAG_SIZE	 (0x1UL << 19UL)
-#define  PSYCHO_IOMMU_TAG_VPAGE	 0x7ffffUL
+#define  PSYCHO_IOMMU_TAG_VPAGE	 0x7ffffULL
 #define  PSYCHO_IOMMU_DATA_VALID (1UL << 30UL)
 #define  PSYCHO_IOMMU_DATA_CACHE (1UL << 28UL)
-#define  PSYCHO_IOMMU_DATA_PPAGE 0xfffffffUL
+#define  PSYCHO_IOMMU_DATA_PPAGE 0xfffffffULL
 
 static void psycho_dump_iommu_tags_and_data(struct pci_pbm_info *pbm,
 					    u64 *tag, u64 *data)
@@ -190,7 +190,7 @@ static void psycho_dump_iommu_tags_and_data(struct pci_pbm_info *pbm,
 		       pbm->name, i,
 		       ((data_val & PSYCHO_IOMMU_DATA_VALID) ? 1 : 0),
 		       ((data_val & PSYCHO_IOMMU_DATA_CACHE) ? 1 : 0),
-		       (data_val & PSYCHO_IOMMU_DATA_PPAGE)<<IOMMU_PAGE_SHIFT);
+		       (data_val & PSYCHO_IOMMU_DATA_PPAGE) << IOMMU_PAGE_SHIFT);
 	}
 }
 
@@ -285,20 +285,20 @@ static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm)
 	return ret;
 }
 
-#define  PSYCHO_PCIAFSR_PMA	0x8000000000000000UL
-#define  PSYCHO_PCIAFSR_PTA	0x4000000000000000UL
-#define  PSYCHO_PCIAFSR_PRTRY	0x2000000000000000UL
-#define  PSYCHO_PCIAFSR_PPERR	0x1000000000000000UL
-#define  PSYCHO_PCIAFSR_SMA	0x0800000000000000UL
-#define  PSYCHO_PCIAFSR_STA	0x0400000000000000UL
-#define  PSYCHO_PCIAFSR_SRTRY	0x0200000000000000UL
-#define  PSYCHO_PCIAFSR_SPERR	0x0100000000000000UL
-#define  PSYCHO_PCIAFSR_RESV1	0x00ff000000000000UL
-#define  PSYCHO_PCIAFSR_BMSK	0x0000ffff00000000UL
-#define  PSYCHO_PCIAFSR_BLK	0x0000000080000000UL
-#define  PSYCHO_PCIAFSR_RESV2	0x0000000040000000UL
-#define  PSYCHO_PCIAFSR_MID	0x000000003e000000UL
-#define  PSYCHO_PCIAFSR_RESV3	0x0000000001ffffffUL
+#define  PSYCHO_PCIAFSR_PMA	0x8000000000000000ULL
+#define  PSYCHO_PCIAFSR_PTA	0x4000000000000000ULL
+#define  PSYCHO_PCIAFSR_PRTRY	0x2000000000000000ULL
+#define  PSYCHO_PCIAFSR_PPERR	0x1000000000000000ULL
+#define  PSYCHO_PCIAFSR_SMA	0x0800000000000000ULL
+#define  PSYCHO_PCIAFSR_STA	0x0400000000000000ULL
+#define  PSYCHO_PCIAFSR_SRTRY	0x0200000000000000ULL
+#define  PSYCHO_PCIAFSR_SPERR	0x0100000000000000ULL
+#define  PSYCHO_PCIAFSR_RESV1	0x00ff000000000000ULL
+#define  PSYCHO_PCIAFSR_BMSK	0x0000ffff00000000ULL
+#define  PSYCHO_PCIAFSR_BLK	0x0000000080000000ULL
+#define  PSYCHO_PCIAFSR_RESV2	0x0000000040000000ULL
+#define  PSYCHO_PCIAFSR_MID	0x000000003e000000ULL
+#define  PSYCHO_PCIAFSR_RESV3	0x0000000001ffffffULL
 
 irqreturn_t psycho_pcierr_intr(int irq, void *dev_id)
 {
-- 
GitLab


From 892c4467e335e9050c95e0d8409c136c4dadaca2 Mon Sep 17 00:00:00 2001
From: David Teigland <teigland@redhat.com>
Date: Wed, 7 Jan 2009 16:48:52 -0600
Subject: [PATCH 023/492] dlm: fix seq_file usage in debugfs lock dump

The old code would leak iterators and leave reference counts on
rsbs because it was ignoring the "stop" seq callback.  The code
followed an example that used the seq operations differently.
This new code is based on actually understanding how the seq
operations work.  It also improves things by saving the hash bucket
in the position to avoid cycling through completed buckets in start.

Siged-off-by: Davd Teigland <teigland@redhat.com>
---
 fs/dlm/debug_fs.c | 696 ++++++++++++++++++++++------------------------
 1 file changed, 337 insertions(+), 359 deletions(-)

diff --git a/fs/dlm/debug_fs.c b/fs/dlm/debug_fs.c
index 2f107d1a6a4..bc4af3ef65a 100644
--- a/fs/dlm/debug_fs.c
+++ b/fs/dlm/debug_fs.c
@@ -1,7 +1,7 @@
 /******************************************************************************
 *******************************************************************************
 **
-**  Copyright (C) 2005-2008 Red Hat, Inc.  All rights reserved.
+**  Copyright (C) 2005-2009 Red Hat, Inc.  All rights reserved.
 **
 **  This copyrighted material is made available to anyone wishing to use,
 **  modify, copy, or redistribute it subject to the terms and conditions
@@ -25,19 +25,6 @@ static struct mutex debug_buf_lock;
 
 static struct dentry *dlm_root;
 
-struct rsb_iter {
-	int entry;
-	int format;
-	int header;
-	struct dlm_ls *ls;
-	struct list_head *next;
-	struct dlm_rsb *rsb;
-};
-
-/*
- * dump all rsb's in the lockspace hash table
- */
-
 static char *print_lockmode(int mode)
 {
 	switch (mode) {
@@ -60,13 +47,13 @@ static char *print_lockmode(int mode)
 	}
 }
 
-static void print_format1_lock(struct seq_file *s, struct dlm_lkb *lkb,
-			       struct dlm_rsb *res)
+static int print_format1_lock(struct seq_file *s, struct dlm_lkb *lkb,
+			      struct dlm_rsb *res)
 {
 	seq_printf(s, "%08x %s", lkb->lkb_id, print_lockmode(lkb->lkb_grmode));
 
-	if (lkb->lkb_status == DLM_LKSTS_CONVERT
-	    || lkb->lkb_status == DLM_LKSTS_WAITING)
+	if (lkb->lkb_status == DLM_LKSTS_CONVERT ||
+	    lkb->lkb_status == DLM_LKSTS_WAITING)
 		seq_printf(s, " (%s)", print_lockmode(lkb->lkb_rqmode));
 
 	if (lkb->lkb_nodeid) {
@@ -80,33 +67,42 @@ static void print_format1_lock(struct seq_file *s, struct dlm_lkb *lkb,
 	if (lkb->lkb_wait_type)
 		seq_printf(s, " wait_type: %d", lkb->lkb_wait_type);
 
-	seq_printf(s, "\n");
+	return seq_printf(s, "\n");
 }
 
 static int print_format1(struct dlm_rsb *res, struct seq_file *s)
 {
 	struct dlm_lkb *lkb;
 	int i, lvblen = res->res_ls->ls_lvblen, recover_list, root_list;
+	int rv;
 
 	lock_rsb(res);
 
-	seq_printf(s, "\nResource %p Name (len=%d) \"", res, res->res_length);
+	rv = seq_printf(s, "\nResource %p Name (len=%d) \"",
+			res, res->res_length);
+	if (rv)
+		goto out;
+
 	for (i = 0; i < res->res_length; i++) {
 		if (isprint(res->res_name[i]))
 			seq_printf(s, "%c", res->res_name[i]);
 		else
 			seq_printf(s, "%c", '.');
 	}
+
 	if (res->res_nodeid > 0)
-		seq_printf(s, "\"  \nLocal Copy, Master is node %d\n",
-			   res->res_nodeid);
+		rv = seq_printf(s, "\"  \nLocal Copy, Master is node %d\n",
+				res->res_nodeid);
 	else if (res->res_nodeid == 0)
-		seq_printf(s, "\"  \nMaster Copy\n");
+		rv = seq_printf(s, "\"  \nMaster Copy\n");
 	else if (res->res_nodeid == -1)
-		seq_printf(s, "\"  \nLooking up master (lkid %x)\n",
-			   res->res_first_lkid);
+		rv = seq_printf(s, "\"  \nLooking up master (lkid %x)\n",
+			   	res->res_first_lkid);
 	else
-		seq_printf(s, "\"  \nInvalid master %d\n", res->res_nodeid);
+		rv = seq_printf(s, "\"  \nInvalid master %d\n",
+				res->res_nodeid);
+	if (rv)
+		goto out;
 
 	/* Print the LVB: */
 	if (res->res_lvbptr) {
@@ -119,52 +115,66 @@ static int print_format1(struct dlm_rsb *res, struct seq_file *s)
 		}
 		if (rsb_flag(res, RSB_VALNOTVALID))
 			seq_printf(s, " (INVALID)");
-		seq_printf(s, "\n");
+		rv = seq_printf(s, "\n");
+		if (rv)
+			goto out;
 	}
 
 	root_list = !list_empty(&res->res_root_list);
 	recover_list = !list_empty(&res->res_recover_list);
 
 	if (root_list || recover_list) {
-		seq_printf(s, "Recovery: root %d recover %d flags %lx "
-			   "count %d\n", root_list, recover_list,
-			   res->res_flags, res->res_recover_locks_count);
+		rv = seq_printf(s, "Recovery: root %d recover %d flags %lx "
+				"count %d\n", root_list, recover_list,
+			   	res->res_flags, res->res_recover_locks_count);
+		if (rv)
+			goto out;
 	}
 
 	/* Print the locks attached to this resource */
 	seq_printf(s, "Granted Queue\n");
-	list_for_each_entry(lkb, &res->res_grantqueue, lkb_statequeue)
-		print_format1_lock(s, lkb, res);
+	list_for_each_entry(lkb, &res->res_grantqueue, lkb_statequeue) {
+		rv = print_format1_lock(s, lkb, res);
+		if (rv)
+			goto out;
+	}
 
 	seq_printf(s, "Conversion Queue\n");
-	list_for_each_entry(lkb, &res->res_convertqueue, lkb_statequeue)
-		print_format1_lock(s, lkb, res);
+	list_for_each_entry(lkb, &res->res_convertqueue, lkb_statequeue) {
+		rv = print_format1_lock(s, lkb, res);
+		if (rv)
+			goto out;
+	}
 
 	seq_printf(s, "Waiting Queue\n");
-	list_for_each_entry(lkb, &res->res_waitqueue, lkb_statequeue)
-		print_format1_lock(s, lkb, res);
+	list_for_each_entry(lkb, &res->res_waitqueue, lkb_statequeue) {
+		rv = print_format1_lock(s, lkb, res);
+		if (rv)
+			goto out;
+	}
 
 	if (list_empty(&res->res_lookup))
 		goto out;
 
 	seq_printf(s, "Lookup Queue\n");
 	list_for_each_entry(lkb, &res->res_lookup, lkb_rsb_lookup) {
-		seq_printf(s, "%08x %s", lkb->lkb_id,
-			   print_lockmode(lkb->lkb_rqmode));
+		rv = seq_printf(s, "%08x %s", lkb->lkb_id,
+				print_lockmode(lkb->lkb_rqmode));
 		if (lkb->lkb_wait_type)
 			seq_printf(s, " wait_type: %d", lkb->lkb_wait_type);
-		seq_printf(s, "\n");
+		rv = seq_printf(s, "\n");
 	}
  out:
 	unlock_rsb(res);
-	return 0;
+	return rv;
 }
 
-static void print_format2_lock(struct seq_file *s, struct dlm_lkb *lkb,
-			       struct dlm_rsb *r)
+static int print_format2_lock(struct seq_file *s, struct dlm_lkb *lkb,
+			      struct dlm_rsb *r)
 {
 	u64 xid = 0;
 	u64 us;
+	int rv;
 
 	if (lkb->lkb_flags & DLM_IFL_USER) {
 		if (lkb->lkb_ua)
@@ -177,69 +187,82 @@ static void print_format2_lock(struct seq_file *s, struct dlm_lkb *lkb,
 	/* id nodeid remid pid xid exflags flags sts grmode rqmode time_us
 	   r_nodeid r_len r_name */
 
-	seq_printf(s, "%x %d %x %u %llu %x %x %d %d %d %llu %u %d \"%s\"\n",
-		   lkb->lkb_id,
-		   lkb->lkb_nodeid,
-		   lkb->lkb_remid,
-		   lkb->lkb_ownpid,
-		   (unsigned long long)xid,
-		   lkb->lkb_exflags,
-		   lkb->lkb_flags,
-		   lkb->lkb_status,
-		   lkb->lkb_grmode,
-		   lkb->lkb_rqmode,
-		   (unsigned long long)us,
-		   r->res_nodeid,
-		   r->res_length,
-		   r->res_name);
+	rv = seq_printf(s, "%x %d %x %u %llu %x %x %d %d %d %llu %u %d \"%s\"\n",
+			lkb->lkb_id,
+			lkb->lkb_nodeid,
+			lkb->lkb_remid,
+			lkb->lkb_ownpid,
+			(unsigned long long)xid,
+			lkb->lkb_exflags,
+			lkb->lkb_flags,
+			lkb->lkb_status,
+			lkb->lkb_grmode,
+			lkb->lkb_rqmode,
+			(unsigned long long)us,
+			r->res_nodeid,
+			r->res_length,
+			r->res_name);
+	return rv;
 }
 
 static int print_format2(struct dlm_rsb *r, struct seq_file *s)
 {
 	struct dlm_lkb *lkb;
+	int rv = 0;
 
 	lock_rsb(r);
 
-	list_for_each_entry(lkb, &r->res_grantqueue, lkb_statequeue)
-		print_format2_lock(s, lkb, r);
-
-	list_for_each_entry(lkb, &r->res_convertqueue, lkb_statequeue)
-		print_format2_lock(s, lkb, r);
+	list_for_each_entry(lkb, &r->res_grantqueue, lkb_statequeue) {
+		rv = print_format2_lock(s, lkb, r);
+		if (rv)
+			goto out;
+	}
 
-	list_for_each_entry(lkb, &r->res_waitqueue, lkb_statequeue)
-		print_format2_lock(s, lkb, r);
+	list_for_each_entry(lkb, &r->res_convertqueue, lkb_statequeue) {
+		rv = print_format2_lock(s, lkb, r);
+		if (rv)
+			goto out;
+	}
 
+	list_for_each_entry(lkb, &r->res_waitqueue, lkb_statequeue) {
+		rv = print_format2_lock(s, lkb, r);
+		if (rv)
+			goto out;
+	}
+ out:
 	unlock_rsb(r);
-	return 0;
+	return rv;
 }
 
-static void print_format3_lock(struct seq_file *s, struct dlm_lkb *lkb,
-			       int rsb_lookup)
+static int print_format3_lock(struct seq_file *s, struct dlm_lkb *lkb,
+			      int rsb_lookup)
 {
 	u64 xid = 0;
+	int rv;
 
 	if (lkb->lkb_flags & DLM_IFL_USER) {
 		if (lkb->lkb_ua)
 			xid = lkb->lkb_ua->xid;
 	}
 
-	seq_printf(s, "lkb %x %d %x %u %llu %x %x %d %d %d %d %d %d %u %llu %llu\n",
-		   lkb->lkb_id,
-		   lkb->lkb_nodeid,
-		   lkb->lkb_remid,
-		   lkb->lkb_ownpid,
-		   (unsigned long long)xid,
-		   lkb->lkb_exflags,
-		   lkb->lkb_flags,
-		   lkb->lkb_status,
-		   lkb->lkb_grmode,
-		   lkb->lkb_rqmode,
-		   lkb->lkb_highbast,
-		   rsb_lookup,
-		   lkb->lkb_wait_type,
-		   lkb->lkb_lvbseq,
-		   (unsigned long long)ktime_to_ns(lkb->lkb_timestamp),
-		   (unsigned long long)ktime_to_ns(lkb->lkb_time_bast));
+	rv = seq_printf(s, "lkb %x %d %x %u %llu %x %x %d %d %d %d %d %d %u %llu %llu\n",
+			lkb->lkb_id,
+			lkb->lkb_nodeid,
+			lkb->lkb_remid,
+			lkb->lkb_ownpid,
+			(unsigned long long)xid,
+			lkb->lkb_exflags,
+			lkb->lkb_flags,
+			lkb->lkb_status,
+			lkb->lkb_grmode,
+			lkb->lkb_rqmode,
+			lkb->lkb_highbast,
+			rsb_lookup,
+			lkb->lkb_wait_type,
+			lkb->lkb_lvbseq,
+			(unsigned long long)ktime_to_ns(lkb->lkb_timestamp),
+			(unsigned long long)ktime_to_ns(lkb->lkb_time_bast));
+	return rv;
 }
 
 static int print_format3(struct dlm_rsb *r, struct seq_file *s)
@@ -247,18 +270,21 @@ static int print_format3(struct dlm_rsb *r, struct seq_file *s)
 	struct dlm_lkb *lkb;
 	int i, lvblen = r->res_ls->ls_lvblen;
 	int print_name = 1;
+	int rv;
 
 	lock_rsb(r);
 
-	seq_printf(s, "rsb %p %d %x %lx %d %d %u %d ",
-		   r,
-		   r->res_nodeid,
-		   r->res_first_lkid,
-		   r->res_flags,
-		   !list_empty(&r->res_root_list),
-		   !list_empty(&r->res_recover_list),
-		   r->res_recover_locks_count,
-		   r->res_length);
+	rv = seq_printf(s, "rsb %p %d %x %lx %d %d %u %d ",
+			r,
+			r->res_nodeid,
+			r->res_first_lkid,
+			r->res_flags,
+			!list_empty(&r->res_root_list),
+			!list_empty(&r->res_recover_list),
+			r->res_recover_locks_count,
+			r->res_length);
+	if (rv)
+		goto out;
 
 	for (i = 0; i < r->res_length; i++) {
 		if (!isascii(r->res_name[i]) || !isprint(r->res_name[i]))
@@ -273,7 +299,9 @@ static int print_format3(struct dlm_rsb *r, struct seq_file *s)
 		else
 			seq_printf(s, " %02x", (unsigned char)r->res_name[i]);
 	}
-	seq_printf(s, "\n");
+	rv = seq_printf(s, "\n");
+	if (rv)
+		goto out;
 
 	if (!r->res_lvbptr)
 		goto do_locks;
@@ -282,344 +310,294 @@ static int print_format3(struct dlm_rsb *r, struct seq_file *s)
 
 	for (i = 0; i < lvblen; i++)
 		seq_printf(s, " %02x", (unsigned char)r->res_lvbptr[i]);
-	seq_printf(s, "\n");
+	rv = seq_printf(s, "\n");
+	if (rv)
+		goto out;
 
  do_locks:
-	list_for_each_entry(lkb, &r->res_grantqueue, lkb_statequeue)
-		print_format3_lock(s, lkb, 0);
-
-	list_for_each_entry(lkb, &r->res_convertqueue, lkb_statequeue)
-		print_format3_lock(s, lkb, 0);
-
-	list_for_each_entry(lkb, &r->res_waitqueue, lkb_statequeue)
-		print_format3_lock(s, lkb, 0);
-
-	list_for_each_entry(lkb, &r->res_lookup, lkb_rsb_lookup)
-		print_format3_lock(s, lkb, 1);
-
-	unlock_rsb(r);
-	return 0;
-}
-
-static int rsb_iter_next(struct rsb_iter *ri)
-{
-	struct dlm_ls *ls = ri->ls;
-	int i;
-
-	if (!ri->next) {
- top:
-		/* Find the next non-empty hash bucket */
-		for (i = ri->entry; i < ls->ls_rsbtbl_size; i++) {
-			read_lock(&ls->ls_rsbtbl[i].lock);
-			if (!list_empty(&ls->ls_rsbtbl[i].list)) {
-				ri->next = ls->ls_rsbtbl[i].list.next;
-				ri->rsb = list_entry(ri->next, struct dlm_rsb,
-							res_hashchain);
-				dlm_hold_rsb(ri->rsb);
-				read_unlock(&ls->ls_rsbtbl[i].lock);
-				break;
-			}
-			read_unlock(&ls->ls_rsbtbl[i].lock);
-		}
-		ri->entry = i;
-
-		if (ri->entry >= ls->ls_rsbtbl_size)
-			return 1;
-	} else {
-		struct dlm_rsb *old = ri->rsb;
-		i = ri->entry;
-		read_lock(&ls->ls_rsbtbl[i].lock);
-		ri->next = ri->next->next;
-		if (ri->next->next == ls->ls_rsbtbl[i].list.next) {
-			/* End of list - move to next bucket */
-			ri->next = NULL;
-			ri->entry++;
-			read_unlock(&ls->ls_rsbtbl[i].lock);
-			dlm_put_rsb(old);
-			goto top;
-		}
-		ri->rsb = list_entry(ri->next, struct dlm_rsb, res_hashchain);
-		dlm_hold_rsb(ri->rsb);
-		read_unlock(&ls->ls_rsbtbl[i].lock);
-		dlm_put_rsb(old);
+	list_for_each_entry(lkb, &r->res_grantqueue, lkb_statequeue) {
+		rv = print_format3_lock(s, lkb, 0);
+		if (rv)
+			goto out;
 	}
 
-	return 0;
-}
-
-static void rsb_iter_free(struct rsb_iter *ri)
-{
-	kfree(ri);
-}
-
-static struct rsb_iter *rsb_iter_init(struct dlm_ls *ls)
-{
-	struct rsb_iter *ri;
-
-	ri = kzalloc(sizeof *ri, GFP_KERNEL);
-	if (!ri)
-		return NULL;
-
-	ri->ls = ls;
-	ri->entry = 0;
-	ri->next = NULL;
-	ri->format = 1;
-
-	if (rsb_iter_next(ri)) {
-		rsb_iter_free(ri);
-		return NULL;
+	list_for_each_entry(lkb, &r->res_convertqueue, lkb_statequeue) {
+		rv = print_format3_lock(s, lkb, 0);
+		if (rv)
+			goto out;
 	}
 
-	return ri;
-}
-
-static void *rsb_seq_start(struct seq_file *file, loff_t *pos)
-{
-	struct rsb_iter *ri;
-	loff_t n = *pos;
-
-	ri = rsb_iter_init(file->private);
-	if (!ri)
-		return NULL;
-
-	while (n--) {
-		if (rsb_iter_next(ri)) {
-			rsb_iter_free(ri);
-			return NULL;
-		}
+	list_for_each_entry(lkb, &r->res_waitqueue, lkb_statequeue) {
+		rv = print_format3_lock(s, lkb, 0);
+		if (rv)
+			goto out;
 	}
 
-	return ri;
-}
-
-static void *rsb_seq_next(struct seq_file *file, void *iter_ptr, loff_t *pos)
-{
-	struct rsb_iter *ri = iter_ptr;
-
-	(*pos)++;
-
-	if (rsb_iter_next(ri)) {
-		rsb_iter_free(ri);
-		return NULL;
+	list_for_each_entry(lkb, &r->res_lookup, lkb_rsb_lookup) {
+		rv = print_format3_lock(s, lkb, 1);
+		if (rv)
+			goto out;
 	}
-
-	return ri;
+ out:
+	unlock_rsb(r);
+	return rv;
 }
 
-static void rsb_seq_stop(struct seq_file *file, void *iter_ptr)
-{
-	/* nothing for now */
-}
+struct rsbtbl_iter {
+	struct dlm_rsb *rsb;
+	unsigned bucket;
+	int format;
+	int header;
+};
 
-static int rsb_seq_show(struct seq_file *file, void *iter_ptr)
+/* seq_printf returns -1 if the buffer is full, and 0 otherwise.
+   If the buffer is full, seq_printf can be called again, but it
+   does nothing and just returns -1.  So, the these printing routines
+   periodically check the return value to avoid wasting too much time
+   trying to print to a full buffer. */
+
+static int table_seq_show(struct seq_file *seq, void *iter_ptr)
 {
-	struct rsb_iter *ri = iter_ptr;
+	struct rsbtbl_iter *ri = iter_ptr;
+	int rv = 0;
 
 	switch (ri->format) {
 	case 1:
-		print_format1(ri->rsb, file);
+		rv = print_format1(ri->rsb, seq);
 		break;
 	case 2:
 		if (ri->header) {
-			seq_printf(file, "id nodeid remid pid xid exflags "
-					 "flags sts grmode rqmode time_ms "
-					 "r_nodeid r_len r_name\n");
+			seq_printf(seq, "id nodeid remid pid xid exflags "
+					"flags sts grmode rqmode time_ms "
+					"r_nodeid r_len r_name\n");
 			ri->header = 0;
 		}
-		print_format2(ri->rsb, file);
+		rv = print_format2(ri->rsb, seq);
 		break;
 	case 3:
 		if (ri->header) {
-			seq_printf(file, "version rsb 1.1 lvb 1.1 lkb 1.1\n");
+			seq_printf(seq, "version rsb 1.1 lvb 1.1 lkb 1.1\n");
 			ri->header = 0;
 		}
-		print_format3(ri->rsb, file);
+		rv = print_format3(ri->rsb, seq);
 		break;
 	}
 
-	return 0;
+	return rv;
 }
 
-static struct seq_operations rsb_seq_ops = {
-	.start = rsb_seq_start,
-	.next  = rsb_seq_next,
-	.stop  = rsb_seq_stop,
-	.show  = rsb_seq_show,
-};
+static struct seq_operations format1_seq_ops;
+static struct seq_operations format2_seq_ops;
+static struct seq_operations format3_seq_ops;
 
-static int rsb_open(struct inode *inode, struct file *file)
+static void *table_seq_start(struct seq_file *seq, loff_t *pos)
 {
-	struct seq_file *seq;
-	int ret;
-
-	ret = seq_open(file, &rsb_seq_ops);
-	if (ret)
-		return ret;
-
-	seq = file->private_data;
-	seq->private = inode->i_private;
-
-	return 0;
-}
-
-static const struct file_operations rsb_fops = {
-	.owner   = THIS_MODULE,
-	.open    = rsb_open,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = seq_release
-};
+	struct dlm_ls *ls = seq->private;
+	struct rsbtbl_iter *ri;
+	struct dlm_rsb *r;
+	loff_t n = *pos;
+	unsigned bucket, entry;
 
-/*
- * Dump state in compact per-lock listing
- */
+	bucket = n >> 32;
+	entry = n & ((1LL << 32) - 1);
 
-static struct rsb_iter *locks_iter_init(struct dlm_ls *ls, loff_t *pos)
-{
-	struct rsb_iter *ri;
+	if (bucket >= ls->ls_rsbtbl_size)
+		return NULL;
 
-	ri = kzalloc(sizeof *ri, GFP_KERNEL);
+	ri = kzalloc(sizeof(struct rsbtbl_iter), GFP_KERNEL);
 	if (!ri)
 		return NULL;
-
-	ri->ls = ls;
-	ri->entry = 0;
-	ri->next = NULL;
-	ri->format = 2;
-
-	if (*pos == 0)
+	if (n == 0)
 		ri->header = 1;
-
-	if (rsb_iter_next(ri)) {
-		rsb_iter_free(ri);
-		return NULL;
+	if (seq->op == &format1_seq_ops)
+		ri->format = 1;
+	if (seq->op == &format2_seq_ops)
+		ri->format = 2;
+	if (seq->op == &format3_seq_ops)
+		ri->format = 3;
+
+	read_lock(&ls->ls_rsbtbl[bucket].lock);
+	if (!list_empty(&ls->ls_rsbtbl[bucket].list)) {
+		list_for_each_entry(r, &ls->ls_rsbtbl[bucket].list,
+				    res_hashchain) {
+			if (!entry--) {
+				dlm_hold_rsb(r);
+				ri->rsb = r;
+				ri->bucket = bucket;
+				read_unlock(&ls->ls_rsbtbl[bucket].lock);
+				return ri;
+			}
+		}
 	}
+	read_unlock(&ls->ls_rsbtbl[bucket].lock);
 
-	return ri;
-}
+	/*
+	 * move to the first rsb in the next non-empty bucket
+	 */
 
-static void *locks_seq_start(struct seq_file *file, loff_t *pos)
-{
-	struct rsb_iter *ri;
-	loff_t n = *pos;
+	/* zero the entry */
+	n &= ~((1LL << 32) - 1);
 
-	ri = locks_iter_init(file->private, pos);
-	if (!ri)
-		return NULL;
+	while (1) {
+		bucket++;
+		n += 1LL << 32;
 
-	while (n--) {
-		if (rsb_iter_next(ri)) {
-			rsb_iter_free(ri);
+		if (bucket >= ls->ls_rsbtbl_size) {
+			kfree(ri);
 			return NULL;
 		}
-	}
 
-	return ri;
+		read_lock(&ls->ls_rsbtbl[bucket].lock);
+		if (!list_empty(&ls->ls_rsbtbl[bucket].list)) {
+			r = list_first_entry(&ls->ls_rsbtbl[bucket].list,
+					     struct dlm_rsb, res_hashchain);
+			dlm_hold_rsb(r);
+			ri->rsb = r;
+			ri->bucket = bucket;
+			read_unlock(&ls->ls_rsbtbl[bucket].lock);
+			*pos = n;
+			return ri;
+		}
+		read_unlock(&ls->ls_rsbtbl[bucket].lock);
+	}
 }
 
-static struct seq_operations locks_seq_ops = {
-	.start = locks_seq_start,
-	.next  = rsb_seq_next,
-	.stop  = rsb_seq_stop,
-	.show  = rsb_seq_show,
-};
-
-static int locks_open(struct inode *inode, struct file *file)
+static void *table_seq_next(struct seq_file *seq, void *iter_ptr, loff_t *pos)
 {
-	struct seq_file *seq;
-	int ret;
-
-	ret = seq_open(file, &locks_seq_ops);
-	if (ret)
-		return ret;
-
-	seq = file->private_data;
-	seq->private = inode->i_private;
-
-	return 0;
-}
-
-static const struct file_operations locks_fops = {
-	.owner   = THIS_MODULE,
-	.open    = locks_open,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = seq_release
-};
-
-/*
- * Dump all rsb/lvb/lkb state in compact listing, more complete than _locks
- * This can replace both formats 1 and 2 eventually.
- */
+	struct dlm_ls *ls = seq->private;
+	struct rsbtbl_iter *ri = iter_ptr;
+	struct list_head *next;
+	struct dlm_rsb *r, *rp;
+	loff_t n = *pos;
+	unsigned bucket;
+
+	bucket = n >> 32;
+
+	/*
+	 * move to the next rsb in the same bucket
+	 */
+
+	read_lock(&ls->ls_rsbtbl[bucket].lock);
+	rp = ri->rsb;
+	next = rp->res_hashchain.next;
+
+	if (next != &ls->ls_rsbtbl[bucket].list) {
+		r = list_entry(next, struct dlm_rsb, res_hashchain);
+		dlm_hold_rsb(r);
+		ri->rsb = r;
+		read_unlock(&ls->ls_rsbtbl[bucket].lock);
+		dlm_put_rsb(rp);
+		++*pos;
+		return ri;
+	}
+	read_unlock(&ls->ls_rsbtbl[bucket].lock);
+	dlm_put_rsb(rp);
 
-static struct rsb_iter *all_iter_init(struct dlm_ls *ls, loff_t *pos)
-{
-	struct rsb_iter *ri;
+	/*
+	 * move to the first rsb in the next non-empty bucket
+	 */
 
-	ri = kzalloc(sizeof *ri, GFP_KERNEL);
-	if (!ri)
-		return NULL;
+	/* zero the entry */
+	n &= ~((1LL << 32) - 1);
 
-	ri->ls = ls;
-	ri->entry = 0;
-	ri->next = NULL;
-	ri->format = 3;
+	while (1) {
+		bucket++;
+		n += 1LL << 32;
 
-	if (*pos == 0)
-		ri->header = 1;
+		if (bucket >= ls->ls_rsbtbl_size) {
+			kfree(ri);
+			return NULL;
+		}
 
-	if (rsb_iter_next(ri)) {
-		rsb_iter_free(ri);
-		return NULL;
+		read_lock(&ls->ls_rsbtbl[bucket].lock);
+		if (!list_empty(&ls->ls_rsbtbl[bucket].list)) {
+			r = list_first_entry(&ls->ls_rsbtbl[bucket].list,
+					     struct dlm_rsb, res_hashchain);
+			dlm_hold_rsb(r);
+			ri->rsb = r;
+			ri->bucket = bucket;
+			read_unlock(&ls->ls_rsbtbl[bucket].lock);
+			*pos = n;
+			return ri;
+		}
+		read_unlock(&ls->ls_rsbtbl[bucket].lock);
 	}
-
-	return ri;
 }
 
-static void *all_seq_start(struct seq_file *file, loff_t *pos)
+static void table_seq_stop(struct seq_file *seq, void *iter_ptr)
 {
-	struct rsb_iter *ri;
-	loff_t n = *pos;
-
-	ri = all_iter_init(file->private, pos);
-	if (!ri)
-		return NULL;
+	struct rsbtbl_iter *ri = iter_ptr;
 
-	while (n--) {
-		if (rsb_iter_next(ri)) {
-			rsb_iter_free(ri);
-			return NULL;
-		}
+	if (ri) {
+		dlm_put_rsb(ri->rsb);
+		kfree(ri);
 	}
-
-	return ri;
 }
 
-static struct seq_operations all_seq_ops = {
-	.start = all_seq_start,
-	.next  = rsb_seq_next,
-	.stop  = rsb_seq_stop,
-	.show  = rsb_seq_show,
+static struct seq_operations format1_seq_ops = {
+	.start = table_seq_start,
+	.next  = table_seq_next,
+	.stop  = table_seq_stop,
+	.show  = table_seq_show,
 };
 
-static int all_open(struct inode *inode, struct file *file)
+static struct seq_operations format2_seq_ops = {
+	.start = table_seq_start,
+	.next  = table_seq_next,
+	.stop  = table_seq_stop,
+	.show  = table_seq_show,
+};
+
+static struct seq_operations format3_seq_ops = {
+	.start = table_seq_start,
+	.next  = table_seq_next,
+	.stop  = table_seq_stop,
+	.show  = table_seq_show,
+};
+
+static const struct file_operations format1_fops;
+static const struct file_operations format2_fops;
+static const struct file_operations format3_fops;
+
+static int table_open(struct inode *inode, struct file *file)
 {
 	struct seq_file *seq;
-	int ret;
+	int ret = -1;
+
+	if (file->f_op == &format1_fops)
+		ret = seq_open(file, &format1_seq_ops);
+	else if (file->f_op == &format2_fops)
+		ret = seq_open(file, &format2_seq_ops);
+	else if (file->f_op == &format3_fops)
+		ret = seq_open(file, &format3_seq_ops);
 
-	ret = seq_open(file, &all_seq_ops);
 	if (ret)
 		return ret;
 
 	seq = file->private_data;
-	seq->private = inode->i_private;
-
+	seq->private = inode->i_private; /* the dlm_ls */
 	return 0;
 }
 
-static const struct file_operations all_fops = {
+static const struct file_operations format1_fops = {
+	.owner   = THIS_MODULE,
+	.open    = table_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release
+};
+
+static const struct file_operations format2_fops = {
+	.owner   = THIS_MODULE,
+	.open    = table_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release
+};
+
+static const struct file_operations format3_fops = {
 	.owner   = THIS_MODULE,
-	.open    = all_open,
+	.open    = table_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
 	.release = seq_release
@@ -689,7 +667,7 @@ int dlm_create_debug_file(struct dlm_ls *ls)
 						      S_IFREG | S_IRUGO,
 						      dlm_root,
 						      ls,
-						      &rsb_fops);
+						      &format1_fops);
 	if (!ls->ls_debug_rsb_dentry)
 		goto fail;
 
@@ -702,7 +680,7 @@ int dlm_create_debug_file(struct dlm_ls *ls)
 							S_IFREG | S_IRUGO,
 							dlm_root,
 							ls,
-							&locks_fops);
+							&format2_fops);
 	if (!ls->ls_debug_locks_dentry)
 		goto fail;
 
@@ -715,7 +693,7 @@ int dlm_create_debug_file(struct dlm_ls *ls)
 						      S_IFREG | S_IRUGO,
 						      dlm_root,
 						      ls,
-						      &all_fops);
+						      &format3_fops);
 	if (!ls->ls_debug_all_dentry)
 		goto fail;
 
-- 
GitLab


From c7be761a8163d2f1ac0b606c21e4316b7abc5af7 Mon Sep 17 00:00:00 2001
From: David Teigland <teigland@redhat.com>
Date: Wed, 7 Jan 2009 16:50:41 -0600
Subject: [PATCH 024/492] dlm: change rsbtbl rwlock to spinlock

The rwlock is almost always used in write mode, so there's no reason
to not use a spinlock instead.

Signed-off-by: David Teigland <teigland@redhat.com>
---
 fs/dlm/debug_fs.c     | 24 ++++++++++++------------
 fs/dlm/dlm_internal.h |  2 +-
 fs/dlm/lock.c         | 26 +++++++++++++-------------
 fs/dlm/lockspace.c    |  2 +-
 fs/dlm/recover.c      | 10 +++++-----
 5 files changed, 32 insertions(+), 32 deletions(-)

diff --git a/fs/dlm/debug_fs.c b/fs/dlm/debug_fs.c
index bc4af3ef65a..1d1d2744223 100644
--- a/fs/dlm/debug_fs.c
+++ b/fs/dlm/debug_fs.c
@@ -416,7 +416,7 @@ static void *table_seq_start(struct seq_file *seq, loff_t *pos)
 	if (seq->op == &format3_seq_ops)
 		ri->format = 3;
 
-	read_lock(&ls->ls_rsbtbl[bucket].lock);
+	spin_lock(&ls->ls_rsbtbl[bucket].lock);
 	if (!list_empty(&ls->ls_rsbtbl[bucket].list)) {
 		list_for_each_entry(r, &ls->ls_rsbtbl[bucket].list,
 				    res_hashchain) {
@@ -424,12 +424,12 @@ static void *table_seq_start(struct seq_file *seq, loff_t *pos)
 				dlm_hold_rsb(r);
 				ri->rsb = r;
 				ri->bucket = bucket;
-				read_unlock(&ls->ls_rsbtbl[bucket].lock);
+				spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 				return ri;
 			}
 		}
 	}
-	read_unlock(&ls->ls_rsbtbl[bucket].lock);
+	spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 
 	/*
 	 * move to the first rsb in the next non-empty bucket
@@ -447,18 +447,18 @@ static void *table_seq_start(struct seq_file *seq, loff_t *pos)
 			return NULL;
 		}
 
-		read_lock(&ls->ls_rsbtbl[bucket].lock);
+		spin_lock(&ls->ls_rsbtbl[bucket].lock);
 		if (!list_empty(&ls->ls_rsbtbl[bucket].list)) {
 			r = list_first_entry(&ls->ls_rsbtbl[bucket].list,
 					     struct dlm_rsb, res_hashchain);
 			dlm_hold_rsb(r);
 			ri->rsb = r;
 			ri->bucket = bucket;
-			read_unlock(&ls->ls_rsbtbl[bucket].lock);
+			spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 			*pos = n;
 			return ri;
 		}
-		read_unlock(&ls->ls_rsbtbl[bucket].lock);
+		spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 	}
 }
 
@@ -477,7 +477,7 @@ static void *table_seq_next(struct seq_file *seq, void *iter_ptr, loff_t *pos)
 	 * move to the next rsb in the same bucket
 	 */
 
-	read_lock(&ls->ls_rsbtbl[bucket].lock);
+	spin_lock(&ls->ls_rsbtbl[bucket].lock);
 	rp = ri->rsb;
 	next = rp->res_hashchain.next;
 
@@ -485,12 +485,12 @@ static void *table_seq_next(struct seq_file *seq, void *iter_ptr, loff_t *pos)
 		r = list_entry(next, struct dlm_rsb, res_hashchain);
 		dlm_hold_rsb(r);
 		ri->rsb = r;
-		read_unlock(&ls->ls_rsbtbl[bucket].lock);
+		spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 		dlm_put_rsb(rp);
 		++*pos;
 		return ri;
 	}
-	read_unlock(&ls->ls_rsbtbl[bucket].lock);
+	spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 	dlm_put_rsb(rp);
 
 	/*
@@ -509,18 +509,18 @@ static void *table_seq_next(struct seq_file *seq, void *iter_ptr, loff_t *pos)
 			return NULL;
 		}
 
-		read_lock(&ls->ls_rsbtbl[bucket].lock);
+		spin_lock(&ls->ls_rsbtbl[bucket].lock);
 		if (!list_empty(&ls->ls_rsbtbl[bucket].list)) {
 			r = list_first_entry(&ls->ls_rsbtbl[bucket].list,
 					     struct dlm_rsb, res_hashchain);
 			dlm_hold_rsb(r);
 			ri->rsb = r;
 			ri->bucket = bucket;
-			read_unlock(&ls->ls_rsbtbl[bucket].lock);
+			spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 			*pos = n;
 			return ri;
 		}
-		read_unlock(&ls->ls_rsbtbl[bucket].lock);
+		spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 	}
 }
 
diff --git a/fs/dlm/dlm_internal.h b/fs/dlm/dlm_internal.h
index ef2f1e35396..076e86f38bc 100644
--- a/fs/dlm/dlm_internal.h
+++ b/fs/dlm/dlm_internal.h
@@ -105,7 +105,7 @@ struct dlm_dirtable {
 struct dlm_rsbtable {
 	struct list_head	list;
 	struct list_head	toss;
-	rwlock_t		lock;
+	spinlock_t		lock;
 };
 
 struct dlm_lkbtable {
diff --git a/fs/dlm/lock.c b/fs/dlm/lock.c
index 6cfe65bbf4a..01e7d39c5fb 100644
--- a/fs/dlm/lock.c
+++ b/fs/dlm/lock.c
@@ -412,9 +412,9 @@ static int search_rsb(struct dlm_ls *ls, char *name, int len, int b,
 		      unsigned int flags, struct dlm_rsb **r_ret)
 {
 	int error;
-	write_lock(&ls->ls_rsbtbl[b].lock);
+	spin_lock(&ls->ls_rsbtbl[b].lock);
 	error = _search_rsb(ls, name, len, b, flags, r_ret);
-	write_unlock(&ls->ls_rsbtbl[b].lock);
+	spin_unlock(&ls->ls_rsbtbl[b].lock);
 	return error;
 }
 
@@ -478,16 +478,16 @@ static int find_rsb(struct dlm_ls *ls, char *name, int namelen,
 		r->res_nodeid = nodeid;
 	}
 
-	write_lock(&ls->ls_rsbtbl[bucket].lock);
+	spin_lock(&ls->ls_rsbtbl[bucket].lock);
 	error = _search_rsb(ls, name, namelen, bucket, 0, &tmp);
 	if (!error) {
-		write_unlock(&ls->ls_rsbtbl[bucket].lock);
+		spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 		dlm_free_rsb(r);
 		r = tmp;
 		goto out;
 	}
 	list_add(&r->res_hashchain, &ls->ls_rsbtbl[bucket].list);
-	write_unlock(&ls->ls_rsbtbl[bucket].lock);
+	spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 	error = 0;
  out:
 	*r_ret = r;
@@ -530,9 +530,9 @@ static void put_rsb(struct dlm_rsb *r)
 	struct dlm_ls *ls = r->res_ls;
 	uint32_t bucket = r->res_bucket;
 
-	write_lock(&ls->ls_rsbtbl[bucket].lock);
+	spin_lock(&ls->ls_rsbtbl[bucket].lock);
 	kref_put(&r->res_ref, toss_rsb);
-	write_unlock(&ls->ls_rsbtbl[bucket].lock);
+	spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 }
 
 void dlm_put_rsb(struct dlm_rsb *r)
@@ -967,7 +967,7 @@ static int shrink_bucket(struct dlm_ls *ls, int b)
 
 	for (;;) {
 		found = 0;
-		write_lock(&ls->ls_rsbtbl[b].lock);
+		spin_lock(&ls->ls_rsbtbl[b].lock);
 		list_for_each_entry_reverse(r, &ls->ls_rsbtbl[b].toss,
 					    res_hashchain) {
 			if (!time_after_eq(jiffies, r->res_toss_time +
@@ -978,20 +978,20 @@ static int shrink_bucket(struct dlm_ls *ls, int b)
 		}
 
 		if (!found) {
-			write_unlock(&ls->ls_rsbtbl[b].lock);
+			spin_unlock(&ls->ls_rsbtbl[b].lock);
 			break;
 		}
 
 		if (kref_put(&r->res_ref, kill_rsb)) {
 			list_del(&r->res_hashchain);
-			write_unlock(&ls->ls_rsbtbl[b].lock);
+			spin_unlock(&ls->ls_rsbtbl[b].lock);
 
 			if (is_master(r))
 				dir_remove(r);
 			dlm_free_rsb(r);
 			count++;
 		} else {
-			write_unlock(&ls->ls_rsbtbl[b].lock);
+			spin_unlock(&ls->ls_rsbtbl[b].lock);
 			log_error(ls, "tossed rsb in use %s", r->res_name);
 		}
 	}
@@ -4224,7 +4224,7 @@ static struct dlm_rsb *find_purged_rsb(struct dlm_ls *ls, int bucket)
 {
 	struct dlm_rsb *r, *r_ret = NULL;
 
-	read_lock(&ls->ls_rsbtbl[bucket].lock);
+	spin_lock(&ls->ls_rsbtbl[bucket].lock);
 	list_for_each_entry(r, &ls->ls_rsbtbl[bucket].list, res_hashchain) {
 		if (!rsb_flag(r, RSB_LOCKS_PURGED))
 			continue;
@@ -4233,7 +4233,7 @@ static struct dlm_rsb *find_purged_rsb(struct dlm_ls *ls, int bucket)
 		r_ret = r;
 		break;
 	}
-	read_unlock(&ls->ls_rsbtbl[bucket].lock);
+	spin_unlock(&ls->ls_rsbtbl[bucket].lock);
 	return r_ret;
 }
 
diff --git a/fs/dlm/lockspace.c b/fs/dlm/lockspace.c
index 8d86b7960f0..aa32e5f0249 100644
--- a/fs/dlm/lockspace.c
+++ b/fs/dlm/lockspace.c
@@ -464,7 +464,7 @@ static int new_lockspace(char *name, int namelen, void **lockspace,
 	for (i = 0; i < size; i++) {
 		INIT_LIST_HEAD(&ls->ls_rsbtbl[i].list);
 		INIT_LIST_HEAD(&ls->ls_rsbtbl[i].toss);
-		rwlock_init(&ls->ls_rsbtbl[i].lock);
+		spin_lock_init(&ls->ls_rsbtbl[i].lock);
 	}
 
 	size = dlm_config.ci_lkbtbl_size;
diff --git a/fs/dlm/recover.c b/fs/dlm/recover.c
index 80aba5bdd4a..eda43f36261 100644
--- a/fs/dlm/recover.c
+++ b/fs/dlm/recover.c
@@ -726,7 +726,7 @@ int dlm_create_root_list(struct dlm_ls *ls)
 	}
 
 	for (i = 0; i < ls->ls_rsbtbl_size; i++) {
-		read_lock(&ls->ls_rsbtbl[i].lock);
+		spin_lock(&ls->ls_rsbtbl[i].lock);
 		list_for_each_entry(r, &ls->ls_rsbtbl[i].list, res_hashchain) {
 			list_add(&r->res_root_list, &ls->ls_root_list);
 			dlm_hold_rsb(r);
@@ -737,7 +737,7 @@ int dlm_create_root_list(struct dlm_ls *ls)
 		   but no other recovery steps should do anything with them. */
 
 		if (dlm_no_directory(ls)) {
-			read_unlock(&ls->ls_rsbtbl[i].lock);
+			spin_unlock(&ls->ls_rsbtbl[i].lock);
 			continue;
 		}
 
@@ -745,7 +745,7 @@ int dlm_create_root_list(struct dlm_ls *ls)
 			list_add(&r->res_root_list, &ls->ls_root_list);
 			dlm_hold_rsb(r);
 		}
-		read_unlock(&ls->ls_rsbtbl[i].lock);
+		spin_unlock(&ls->ls_rsbtbl[i].lock);
 	}
  out:
 	up_write(&ls->ls_root_sem);
@@ -775,7 +775,7 @@ void dlm_clear_toss_list(struct dlm_ls *ls)
 	int i;
 
 	for (i = 0; i < ls->ls_rsbtbl_size; i++) {
-		write_lock(&ls->ls_rsbtbl[i].lock);
+		spin_lock(&ls->ls_rsbtbl[i].lock);
 		list_for_each_entry_safe(r, safe, &ls->ls_rsbtbl[i].toss,
 					 res_hashchain) {
 			if (dlm_no_directory(ls) || !is_master(r)) {
@@ -783,7 +783,7 @@ void dlm_clear_toss_list(struct dlm_ls *ls)
 				dlm_free_rsb(r);
 			}
 		}
-		write_unlock(&ls->ls_rsbtbl[i].lock);
+		spin_unlock(&ls->ls_rsbtbl[i].lock);
 	}
 }
 
-- 
GitLab


From dd5d1241ebd3fe72a9a245912fd49137f311a524 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 8 Jan 2009 16:46:17 -0800
Subject: [PATCH 025/492] sparc: Update 32-bit defconfig.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/configs/sparc32_defconfig | 290 ++++++++++++++++++++-------
 1 file changed, 214 insertions(+), 76 deletions(-)

diff --git a/arch/sparc/configs/sparc32_defconfig b/arch/sparc/configs/sparc32_defconfig
index 2e3a149ea0e..09ab46e4c59 100644
--- a/arch/sparc/configs/sparc32_defconfig
+++ b/arch/sparc/configs/sparc32_defconfig
@@ -1,15 +1,21 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Tue Apr 29 01:28:58 2008
+# Linux kernel version: 2.6.28
+# Thu Jan  8 16:45:44 2009
 #
+# CONFIG_64BIT is not set
+CONFIG_SPARC=y
+CONFIG_SPARC32=y
+# CONFIG_SPARC64 is not set
+CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc32_defconfig"
+CONFIG_BITS=32
+CONFIG_AUDIT_ARCH=y
 CONFIG_MMU=y
 CONFIG_HIGHMEM=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
-CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -66,31 +72,30 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -105,59 +110,73 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_FREEZER is not set
 
 #
-# General machine setup
+# Processor type and features
 #
 # CONFIG_SMP is not set
-CONFIG_SPARC=y
-CONFIG_SPARC32=y
-CONFIG_SBUS=y
-CONFIG_SBUSCHAR=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_SUN_AUXIO=y
-CONFIG_SUN_IO=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_EMULATED_CMPXCHG=y
-CONFIG_SUN_PM=y
-# CONFIG_SUN4 is not set
-CONFIG_PCI=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_NO_DMA is not set
-CONFIG_SUN_OPENPROMFS=m
-# CONFIG_SPARC_LED is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_SUN_PM=y
+# CONFIG_SPARC_LED is not set
+CONFIG_SERIAL_CONSOLE=y
 
 #
-# Networking
+# Bus options (PCI etc.)
 #
+CONFIG_SBUS=y
+CONFIG_SBUSCHAR=y
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+CONFIG_SUN_OPENPROMFS=m
+CONFIG_SPARC32_PCI=y
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
 CONFIG_NET=y
 
 #
 # Networking options
 #
+# CONFIG_NET_NS is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -166,6 +185,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=y
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -221,6 +241,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -231,6 +252,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -241,14 +263,14 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+# CONFIG_PHONET is not set
+CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 # CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -262,7 +284,9 @@ CONFIG_NET_PKTGEN=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -286,12 +310,15 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -335,6 +362,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -348,6 +376,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -367,6 +397,7 @@ CONFIG_SCSI_QLOGICPTI=m
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_SCSI_SUNESP=y
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -374,11 +405,14 @@ CONFIG_SCSI_SUNESP=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -402,14 +436,16 @@ CONFIG_SUNQE=m
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_MYRI_SBUS is not set
@@ -425,18 +461,25 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -445,6 +488,10 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -492,9 +539,11 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_LIFEBOOK=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -516,15 +565,18 @@ CONFIG_SERIO_LIBPS2=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
@@ -540,23 +592,20 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_CONSOLE_POLL=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
-CONFIG_JS_RTC=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -577,25 +626,38 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -616,15 +678,17 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_PROM_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_COMPAT=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -632,31 +696,70 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+CONFIG_RTC_DRV_M48T59=y
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # Misc Linux/SPARC drivers
 #
 CONFIG_SUN_OPENPROMIO=m
-CONFIG_SUN_MOSTEK_RTC=m
-# CONFIG_SUN_BPP is not set
-# CONFIG_SUN_VIDEOPIX is not set
 # CONFIG_TADPOLE_TS102_UCTRL is not set
 # CONFIG_SUN_JSFLASH is not set
 
-#
-# Unix98 PTY support
-#
-CONFIG_UNIX98_PTY_COUNT=256
-
 #
 # File systems
 #
@@ -666,11 +769,12 @@ CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -702,14 +806,12 @@ CONFIG_ISO9660_FS=m
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -720,6 +822,7 @@ CONFIG_SYSFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
@@ -729,13 +832,13 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=m
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -806,9 +909,12 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -822,37 +928,59 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
-CONFIG_KGDB=y
 CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_KGDB=y
 CONFIG_KGDB_SERIAL_CONSOLE=y
 CONFIG_KGDB_TESTS=y
 # CONFIG_KGDB_TESTS_ON_BOOT is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_STACK_DEBUG is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
 # Crypto core or helper
 #
+# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_NULL=m
 # CONFIG_CRYPTO_CRYPTD is not set
@@ -890,6 +1018,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -921,15 +1053,21 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 #
 CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-- 
GitLab


From a638f25ab04bcb8fd3012b0d4a2fe7dab329f82c Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 8 Jan 2009 16:47:17 -0800
Subject: [PATCH 026/492] sparc: Fix sun4d_irq.c build.

Reported by Robert Reif.

Fallout from 'swap' changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/sun4d_smp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index 16ab0cb731c..50afaed99c8 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -60,7 +60,7 @@ extern int __smp4d_processor_id(void);
 #define SMP_PRINTK(x)
 #endif
 
-static inline unsigned long swap(volatile unsigned long *ptr, unsigned long val)
+static inline unsigned long sun4d_swap(volatile unsigned long *ptr, unsigned long val)
 {
 	__asm__ __volatile__("swap [%1], %0\n\t" :
 			     "=&r" (val), "=&r" (ptr) :
@@ -115,7 +115,7 @@ void __cpuinit smp4d_callin(void)
 	local_flush_tlb_all();
 
 	/* Allow master to continue. */
-	swap((unsigned long *)&cpu_callin_map[cpuid], 1);
+	sun4d_swap((unsigned long *)&cpu_callin_map[cpuid], 1);
 	local_flush_cache_all();
 	local_flush_tlb_all();
 	
-- 
GitLab


From b41418f48c389bad4cd87156792b4a4f24a70729 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 8 Jan 2009 16:52:36 -0800
Subject: [PATCH 027/492] sparc: Most unaligned_64.c tweaks for branch tracer
 warnings.

arch/sparc/kernel/unaligned_64.c: In function 'handle_lddfmna':
arch/sparc/kernel/unaligned_64.c:592: warning: 'second' may be used uninitialized in this function

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/unaligned_64.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/sparc/kernel/unaligned_64.c b/arch/sparc/kernel/unaligned_64.c
index f164d5a850f..379209982a0 100644
--- a/arch/sparc/kernel/unaligned_64.c
+++ b/arch/sparc/kernel/unaligned_64.c
@@ -589,7 +589,6 @@ void handle_lddfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr
 	unsigned long pc = regs->tpc;
 	unsigned long tstate = regs->tstate;
 	u32 insn;
-	u32 first, second;
 	u64 value;
 	u8 freg;
 	int flag;
@@ -601,19 +600,20 @@ void handle_lddfmna(struct pt_regs *regs, unsigned long sfar, unsigned long sfsr
 		pc = (u32)pc;
 	if (get_user(insn, (u32 __user *) pc) != -EFAULT) {
 		int asi = decode_asi(insn, regs);
+		u32 first, second;
 		int err;
 
 		if ((asi > ASI_SNFL) ||
 		    (asi < ASI_P))
 			goto daex;
+		first = second = 0;
 		err = get_user(first, (u32 __user *)sfar);
 		if (!err)
 			err = get_user(second, (u32 __user *)(sfar + 4));
 		if (err) {
-			if (asi & 0x2) /* NF */ {
-				first = 0; second = 0;
-			} else
+			if (!(asi & 0x2))
 				goto daex;
+			first = second = 0;
 		}
 		save_and_clear_fpu();
 		freg = ((insn >> 25) & 0x1e) | ((insn >> 20) & 0x20);
-- 
GitLab


From 45536ffc8dcb7798ff4818f54391547e5af19648 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Thu, 8 Jan 2009 16:57:35 -0800
Subject: [PATCH 028/492] sparc: Create a new file lib/ksyms.c and add export
 of all symbols defined in assembler in lib/ to this file.

Remove the duplicate entries from kernel/sparc_ksyms_*.c

The rationale behind this is that the EXPORT_SYMBOL() should be close to
their definition and we cannot add designate a symbol to be exported in
assembler so at least put it in a file in the same directory.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Additions by Julian Calaby:
* Rebased over sparc-2.6.git HEAD

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/sparc_ksyms_32.c |  86 -------------
 arch/sparc/kernel/sparc_ksyms_64.c | 100 ---------------
 arch/sparc/lib/Makefile            |   1 +
 arch/sparc/lib/ksyms.c             | 196 +++++++++++++++++++++++++++++
 4 files changed, 197 insertions(+), 186 deletions(-)
 create mode 100644 arch/sparc/lib/ksyms.c

diff --git a/arch/sparc/kernel/sparc_ksyms_32.c b/arch/sparc/kernel/sparc_ksyms_32.c
index e1e97639231..f4ee14de8db 100644
--- a/arch/sparc/kernel/sparc_ksyms_32.c
+++ b/arch/sparc/kernel/sparc_ksyms_32.c
@@ -5,15 +5,12 @@
  * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
  */
 
-/* Tell string.h we don't want memcpy etc. as cpp defines */
-#define EXPORT_SYMTAB_STROPS
 #define PROMLIB_INTERNAL
 
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/types.h>
-#include <linux/string.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/in6.h>
@@ -55,57 +52,14 @@ struct poll {
 	short revents;
 };
 
-extern void (*__copy_1page)(void *, const void *);
-extern void __memmove(void *, const void *, __kernel_size_t);
-extern void (*bzero_1page)(void *);
-extern void *__bzero(void *, size_t);
-extern void *__memscan_zero(void *, size_t);
-extern void *__memscan_generic(void *, int, size_t);
-extern int __strncmp(const char *, const char *, __kernel_size_t);
-
-extern int __ashrdi3(int, int);
-extern int __ashldi3(int, int);
-extern int __lshrdi3(int, int);
-extern int __muldi3(int, int);
-extern int __divdi3(int, int);
-
-/* Private functions with odd calling conventions. */
-extern void ___atomic24_add(void);
-extern void ___atomic24_sub(void);
-extern void ___rw_read_enter(void);
-extern void ___rw_read_try(void);
-extern void ___rw_read_exit(void);
-extern void ___rw_write_enter(void);
-
-/* Alias functions whose names begin with "." and export the aliases.
- * The module references will be fixed up by module_frob_arch_sections.
- */
-extern int _Div(int, int);
-extern int _Mul(int, int);
-extern int _Rem(int, int);
-extern unsigned _Udiv(unsigned, unsigned);
-extern unsigned _Umul(unsigned, unsigned);
-extern unsigned _Urem(unsigned, unsigned);
-
 /* used by various drivers */
 EXPORT_SYMBOL(sparc_cpu_model);
 EXPORT_SYMBOL(kernel_thread);
-#ifdef CONFIG_SMP
-// XXX find what uses (or used) these.   AV: see asm/spinlock.h
-EXPORT_SYMBOL(___rw_read_enter);
-EXPORT_SYMBOL(___rw_read_try);
-EXPORT_SYMBOL(___rw_read_exit);
-EXPORT_SYMBOL(___rw_write_enter);
-#endif
 
 EXPORT_SYMBOL(sparc_valid_addr_bitmap);
 EXPORT_SYMBOL(phys_base);
 EXPORT_SYMBOL(pfn_base);
 
-/* Atomic operations. */
-EXPORT_SYMBOL(___atomic24_add);
-EXPORT_SYMBOL(___atomic24_sub);
-
 /* Per-CPU information table */
 EXPORT_PER_CPU_SYMBOL(__cpu_data);
 
@@ -193,31 +147,8 @@ EXPORT_SYMBOL(__prom_getchild);
 EXPORT_SYMBOL(__prom_getsibling);
 
 /* sparc library symbols */
-EXPORT_SYMBOL(memscan);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strncmp);
 EXPORT_SYMBOL(page_kernel);
 
-/* Special internal versions of library functions. */
-EXPORT_SYMBOL(__copy_1page);
-EXPORT_SYMBOL(__memcpy);
-EXPORT_SYMBOL(__memset);
-EXPORT_SYMBOL(bzero_1page);
-EXPORT_SYMBOL(__bzero);
-EXPORT_SYMBOL(__memscan_zero);
-EXPORT_SYMBOL(__memscan_generic);
-EXPORT_SYMBOL(__strncmp);
-EXPORT_SYMBOL(__memmove);
-
-/* Moving data to/from userspace. */
-EXPORT_SYMBOL(__copy_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(__strnlen_user);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL(__csum_partial_copy_sparc_generic);
-EXPORT_SYMBOL(csum_partial);
-
 /* Cache flushing.  */
 EXPORT_SYMBOL(sparc_flush_page_to_ram);
 
@@ -226,23 +157,6 @@ EXPORT_SYMBOL(sun_do_break);
 
 EXPORT_SYMBOL(__ret_efault);
 
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(__muldi3);
-EXPORT_SYMBOL(__divdi3);
-
-EXPORT_SYMBOL(_Rem);
-EXPORT_SYMBOL(_Urem);
-EXPORT_SYMBOL(_Mul);
-EXPORT_SYMBOL(_Umul);
-EXPORT_SYMBOL(_Div);
-EXPORT_SYMBOL(_Udiv);
-
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 EXPORT_SYMBOL(do_BUG);
 #endif
diff --git a/arch/sparc/kernel/sparc_ksyms_64.c b/arch/sparc/kernel/sparc_ksyms_64.c
index 0133211ab63..09874eaf0fb 100644
--- a/arch/sparc/kernel/sparc_ksyms_64.c
+++ b/arch/sparc/kernel/sparc_ksyms_64.c
@@ -5,13 +5,10 @@
  * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
  */
 
-/* Tell string.h we don't want memcpy etc. as cpp defines */
-#define EXPORT_SYMTAB_STROPS
 #define PROMLIB_INTERNAL
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/string.h>
 #include <linux/sched.h>
 #include <linux/in6.h>
 #include <linux/pci.h>
@@ -59,10 +56,6 @@ struct poll {
 
 extern void die_if_kernel(char *str, struct pt_regs *regs);
 extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-extern void *__bzero(void *, size_t);
-extern void *__memscan_zero(void *, size_t);
-extern void *__memscan_generic(void *, int, size_t);
-extern __kernel_size_t strlen(const char *);
 extern void sys_sigsuspend(void);
 extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg);
 extern int (*handle_mathemu)(struct pt_regs *, struct fpustate *);
@@ -74,22 +67,6 @@ extern int __ashrdi3(int, int);
 
 extern int dump_fpu (struct pt_regs * regs, elf_fpregset_t * fpregs);
 
-extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
-		      unsigned long *);
-extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
-		      unsigned long *, unsigned long *);
-extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
-		      unsigned long *, unsigned long *, unsigned long *);
-
-extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *);
-extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *,
-			  unsigned long *);
-extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *,
-			  unsigned long *, unsigned long *);
-extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *,
-			  unsigned long *, unsigned long *, unsigned long *);
-
 /* Per-CPU information table */
 EXPORT_PER_CPU_SYMBOL(__cpu_data);
 
@@ -103,39 +80,8 @@ EXPORT_SYMBOL(__write_unlock);
 EXPORT_SYMBOL(__write_trylock);
 #endif /* CONFIG_SMP */
 
-#ifdef CONFIG_MCOUNT
-EXPORT_SYMBOL(_mcount);
-#endif
-
 EXPORT_SYMBOL(sparc64_get_clock_tick);
 
-/* RW semaphores */
-EXPORT_SYMBOL(__down_read);
-EXPORT_SYMBOL(__down_read_trylock);
-EXPORT_SYMBOL(__down_write);
-EXPORT_SYMBOL(__down_write_trylock);
-EXPORT_SYMBOL(__up_read);
-EXPORT_SYMBOL(__up_write);
-EXPORT_SYMBOL(__downgrade_write);
-
-/* Atomic counter implementation. */
-EXPORT_SYMBOL(atomic_add);
-EXPORT_SYMBOL(atomic_add_ret);
-EXPORT_SYMBOL(atomic_sub);
-EXPORT_SYMBOL(atomic_sub_ret);
-EXPORT_SYMBOL(atomic64_add);
-EXPORT_SYMBOL(atomic64_add_ret);
-EXPORT_SYMBOL(atomic64_sub);
-EXPORT_SYMBOL(atomic64_sub_ret);
-
-/* Atomic bit operations. */
-EXPORT_SYMBOL(test_and_set_bit);
-EXPORT_SYMBOL(test_and_clear_bit);
-EXPORT_SYMBOL(test_and_change_bit);
-EXPORT_SYMBOL(set_bit);
-EXPORT_SYMBOL(clear_bit);
-EXPORT_SYMBOL(change_bit);
-
 EXPORT_SYMBOL(__flushw_user);
 
 EXPORT_SYMBOL(tlb_type);
@@ -209,35 +155,10 @@ EXPORT_SYMBOL(prom_getintdefault);
 EXPORT_SYMBOL(__prom_getchild);
 EXPORT_SYMBOL(__prom_getsibling);
 
-/* sparc library symbols */
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(__strlen_user);
-EXPORT_SYMBOL(__strnlen_user);
-
-/* Special internal versions of library functions. */
-EXPORT_SYMBOL(_clear_page);
-EXPORT_SYMBOL(clear_user_page);
-EXPORT_SYMBOL(copy_user_page);
-EXPORT_SYMBOL(__bzero);
-EXPORT_SYMBOL(__memscan_zero);
-EXPORT_SYMBOL(__memscan_generic);
-EXPORT_SYMBOL(__memset);
-
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_nocheck);
-EXPORT_SYMBOL(__csum_partial_copy_from_user);
-EXPORT_SYMBOL(__csum_partial_copy_to_user);
-EXPORT_SYMBOL(ip_fast_csum);
-
 /* Moving data to/from/in userspace. */
-EXPORT_SYMBOL(___copy_to_user);
-EXPORT_SYMBOL(___copy_from_user);
-EXPORT_SYMBOL(___copy_in_user);
 EXPORT_SYMBOL(copy_to_user_fixup);
 EXPORT_SYMBOL(copy_from_user_fixup);
 EXPORT_SYMBOL(copy_in_user_fixup);
-EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(__clear_user);
 
 /* Various address conversion macros use this. */
 EXPORT_SYMBOL(sparc64_valid_addr_bitmap);
@@ -247,17 +168,6 @@ EXPORT_SYMBOL(sparc64_valid_addr_bitmap);
  */
 EXPORT_SYMBOL(__ret_efault);
 
-/* No version information on these, as gcc produces such symbols. */
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(strncmp);
-
-void VISenter(void);
-/* RAID code needs this */
-EXPORT_SYMBOL(VISenter);
-
 /* for input/keybdev */
 EXPORT_SYMBOL(sun_do_break);
 EXPORT_SYMBOL(stop_a_enabled);
@@ -271,14 +181,4 @@ EXPORT_SYMBOL(ns87303_lock);
 
 EXPORT_SYMBOL(tick_ops);
 
-EXPORT_SYMBOL(xor_vis_2);
-EXPORT_SYMBOL(xor_vis_3);
-EXPORT_SYMBOL(xor_vis_4);
-EXPORT_SYMBOL(xor_vis_5);
-
-EXPORT_SYMBOL(xor_niagara_2);
-EXPORT_SYMBOL(xor_niagara_3);
-EXPORT_SYMBOL(xor_niagara_4);
-EXPORT_SYMBOL(xor_niagara_5);
-
 EXPORT_SYMBOL_GPL(real_hard_smp_processor_id);
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index 375016e1914..273fc85269f 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -42,3 +42,4 @@ lib-$(CONFIG_SPARC64) += mcount.o ipcsum.o xor.o
 
 obj-y                 += iomap.o
 obj-$(CONFIG_SPARC32) += atomic32.o
+obj-y                 += ksyms.o
diff --git a/arch/sparc/lib/ksyms.c b/arch/sparc/lib/ksyms.c
new file mode 100644
index 00000000000..704b1266838
--- /dev/null
+++ b/arch/sparc/lib/ksyms.c
@@ -0,0 +1,196 @@
+/*
+ * Export of symbols defined in assembler
+ */
+
+/* Tell string.h we don't want memcpy etc. as cpp defines */
+#define EXPORT_SYMTAB_STROPS
+
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/checksum.h>
+#include <asm/uaccess.h>
+#include <asm/ftrace.h>
+
+/* string functions */
+EXPORT_SYMBOL(strlen);
+EXPORT_SYMBOL(__strlen_user);
+EXPORT_SYMBOL(__strnlen_user);
+EXPORT_SYMBOL(strncmp);
+
+/* mem* functions */
+extern void *__memscan_zero(void *, size_t);
+extern void *__memscan_generic(void *, int, size_t);
+extern void *__bzero(void *, size_t);
+
+EXPORT_SYMBOL(memscan);
+EXPORT_SYMBOL(__memscan_zero);
+EXPORT_SYMBOL(__memscan_generic);
+EXPORT_SYMBOL(memcmp);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(__memset);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(__bzero);
+
+/* Moving data to/from/in userspace. */
+EXPORT_SYMBOL(__strncpy_from_user);
+
+/* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial);
+
+#ifdef CONFIG_MCOUNT
+EXPORT_SYMBOL(_mcount);
+#endif
+
+/*
+ * sparc
+ */
+#ifdef CONFIG_SPARC32
+extern int __ashrdi3(int, int);
+extern int __ashldi3(int, int);
+extern int __lshrdi3(int, int);
+extern int __muldi3(int, int);
+extern int __divdi3(int, int);
+
+extern void (*__copy_1page)(void *, const void *);
+extern void (*bzero_1page)(void *);
+
+extern int __strncmp(const char *, const char *, __kernel_size_t);
+
+extern void ___rw_read_enter(void);
+extern void ___rw_read_try(void);
+extern void ___rw_read_exit(void);
+extern void ___rw_write_enter(void);
+extern void ___atomic24_add(void);
+extern void ___atomic24_sub(void);
+
+/* Alias functions whose names begin with "." and export the aliases.
+ * The module references will be fixed up by module_frob_arch_sections.
+ */
+extern int _Div(int, int);
+extern int _Mul(int, int);
+extern int _Rem(int, int);
+extern unsigned _Udiv(unsigned, unsigned);
+extern unsigned _Umul(unsigned, unsigned);
+extern unsigned _Urem(unsigned, unsigned);
+
+/* Networking helper routines. */
+EXPORT_SYMBOL(__csum_partial_copy_sparc_generic);
+
+/* Special internal versions of library functions. */
+EXPORT_SYMBOL(__copy_1page);
+EXPORT_SYMBOL(__memcpy);
+EXPORT_SYMBOL(__memmove);
+EXPORT_SYMBOL(bzero_1page);
+
+/* string functions */
+EXPORT_SYMBOL(__strncmp);
+
+/* Moving data to/from/in userspace. */
+EXPORT_SYMBOL(__copy_user);
+
+/* Used by asm/spinlock.h */
+#ifdef CONFIG_SMP
+EXPORT_SYMBOL(___rw_read_enter);
+EXPORT_SYMBOL(___rw_read_try);
+EXPORT_SYMBOL(___rw_read_exit);
+EXPORT_SYMBOL(___rw_write_enter);
+#endif
+
+/* Atomic operations. */
+EXPORT_SYMBOL(___atomic24_add);
+EXPORT_SYMBOL(___atomic24_sub);
+
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__divdi3);
+
+EXPORT_SYMBOL(_Rem);
+EXPORT_SYMBOL(_Urem);
+EXPORT_SYMBOL(_Mul);
+EXPORT_SYMBOL(_Umul);
+EXPORT_SYMBOL(_Div);
+EXPORT_SYMBOL(_Udiv);
+#endif
+
+/*
+ * sparc64
+ */
+#ifdef CONFIG_SPARC64
+/* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+EXPORT_SYMBOL(__csum_partial_copy_from_user);
+EXPORT_SYMBOL(__csum_partial_copy_to_user);
+EXPORT_SYMBOL(ip_fast_csum);
+
+/* Moving data to/from/in userspace. */
+EXPORT_SYMBOL(___copy_to_user);
+EXPORT_SYMBOL(___copy_from_user);
+EXPORT_SYMBOL(___copy_in_user);
+EXPORT_SYMBOL(__clear_user);
+
+/* RW semaphores */
+EXPORT_SYMBOL(__down_read);
+EXPORT_SYMBOL(__down_read_trylock);
+EXPORT_SYMBOL(__down_write);
+EXPORT_SYMBOL(__down_write_trylock);
+EXPORT_SYMBOL(__up_read);
+EXPORT_SYMBOL(__up_write);
+EXPORT_SYMBOL(__downgrade_write);
+
+/* Atomic counter implementation. */
+EXPORT_SYMBOL(atomic_add);
+EXPORT_SYMBOL(atomic_add_ret);
+EXPORT_SYMBOL(atomic_sub);
+EXPORT_SYMBOL(atomic_sub_ret);
+EXPORT_SYMBOL(atomic64_add);
+EXPORT_SYMBOL(atomic64_add_ret);
+EXPORT_SYMBOL(atomic64_sub);
+EXPORT_SYMBOL(atomic64_sub_ret);
+
+/* Atomic bit operations. */
+EXPORT_SYMBOL(test_and_set_bit);
+EXPORT_SYMBOL(test_and_clear_bit);
+EXPORT_SYMBOL(test_and_change_bit);
+EXPORT_SYMBOL(set_bit);
+EXPORT_SYMBOL(clear_bit);
+EXPORT_SYMBOL(change_bit);
+
+/* Special internal versions of library functions. */
+EXPORT_SYMBOL(_clear_page);
+EXPORT_SYMBOL(clear_user_page);
+EXPORT_SYMBOL(copy_user_page);
+
+/* RAID code needs this */
+void VISenter(void);
+EXPORT_SYMBOL(VISenter);
+
+extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
+		unsigned long *);
+extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
+		unsigned long *, unsigned long *);
+extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
+		unsigned long *, unsigned long *, unsigned long *);
+EXPORT_SYMBOL(xor_vis_2);
+EXPORT_SYMBOL(xor_vis_3);
+EXPORT_SYMBOL(xor_vis_4);
+EXPORT_SYMBOL(xor_vis_5);
+
+extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *,
+		unsigned long *);
+extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *,
+		unsigned long *, unsigned long *);
+extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *,
+		unsigned long *, unsigned long *, unsigned long *);
+
+EXPORT_SYMBOL(xor_niagara_2);
+EXPORT_SYMBOL(xor_niagara_3);
+EXPORT_SYMBOL(xor_niagara_4);
+EXPORT_SYMBOL(xor_niagara_5);
+#endif
-- 
GitLab


From 6943f3da3e64edd95ee2d33abc0a642357746ba6 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Thu, 8 Jan 2009 16:58:05 -0800
Subject: [PATCH 029/492] sparc: move EXPORT_SYMBOL to the symbols definition

Move all applicable EXPORT_SYMBOL()s to the file where the respective
symbol is defined.

Removed all the includes that are no longer needed in sparc_ksyms_32.c

Comment all remaining EXPORT_SYMBOL()s in sparc_ksyms_32.c

Two symbols are shared with sparc64 thus the exports were removed from
the sparc_ksyms_64.c too, along with the include their ommission made
redundant.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Additions by Julian Calaby:
* Moved EXPORT_SYMBOL()s for prom functions to their rightful places.
* Made some minor cleanups to the includes and comments of sparc_ksyms_32.c
* Made another subtraction from sparc_ksyms_64.c
* Updated and tidied commit message.
* Rebased patch over sparc-2.6.git HEAD.
* Ensured that all modified files have the correct includes.

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/auxio_32.c       |   3 +-
 arch/sparc/kernel/cpu.c            |   2 +
 arch/sparc/kernel/idprom.c         |   3 +
 arch/sparc/kernel/ioport.c         |  15 ++++
 arch/sparc/kernel/irq_32.c         |   1 +
 arch/sparc/kernel/pcic.c           |   6 ++
 arch/sparc/kernel/process_32.c     |   2 +
 arch/sparc/kernel/setup_32.c       |   3 +
 arch/sparc/kernel/sparc_ksyms_32.c | 137 ++---------------------------
 arch/sparc/kernel/sparc_ksyms_64.c |   5 --
 arch/sparc/kernel/time_32.c        |   2 +
 arch/sparc/kernel/traps_32.c       |   1 +
 arch/sparc/mm/generic_32.c         |   1 +
 arch/sparc/mm/highmem.c            |   2 +
 arch/sparc/mm/init_32.c            |   6 ++
 arch/sparc/prom/init_32.c          |   4 +
 arch/sparc/prom/misc_32.c          |   3 +
 arch/sparc/prom/ranges.c           |   3 +
 arch/sparc/prom/tree_32.c          |  17 ++++
 19 files changed, 82 insertions(+), 134 deletions(-)

diff --git a/arch/sparc/kernel/auxio_32.c b/arch/sparc/kernel/auxio_32.c
index 09c857215a5..45c41232fc4 100644
--- a/arch/sparc/kernel/auxio_32.c
+++ b/arch/sparc/kernel/auxio_32.c
@@ -76,6 +76,7 @@ unsigned char get_auxio(void)
 		return sbus_readb(auxio_register);
 	return 0;
 }
+EXPORT_SYMBOL(get_auxio);
 
 void set_auxio(unsigned char bits_on, unsigned char bits_off)
 {
@@ -102,7 +103,7 @@ void set_auxio(unsigned char bits_on, unsigned char bits_off)
 	};
 	spin_unlock_irqrestore(&auxio_lock, flags);
 }
-
+EXPORT_SYMBOL(set_auxio);
 
 /* sun4m power control register (AUXIO2) */
 
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index 6c2da2420f7..f0b825505da 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/threads.h>
@@ -20,6 +21,7 @@
 #include "kernel.h"
 
 DEFINE_PER_CPU(cpuinfo_sparc, __cpu_data) = { 0 };
+EXPORT_PER_CPU_SYMBOL(__cpu_data);
 
 struct cpu_info {
 	int psr_vers;
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index c16135e0c15..57922f69c3f 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -8,11 +8,14 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/module.h>
 
 #include <asm/oplib.h>
 #include <asm/idprom.h>
 
 struct idprom *idprom;
+EXPORT_SYMBOL(idprom);
+
 static struct idprom idprom_buffer;
 
 #ifdef CONFIG_SPARC32
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 7ce14f05eb4..87ea0d03d97 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -120,6 +120,7 @@ void __iomem *ioremap(unsigned long offset, unsigned long size)
 	sprintf(name, "phys_%08x", (u32)offset);
 	return _sparc_alloc_io(0, offset, size, name);
 }
+EXPORT_SYMBOL(ioremap);
 
 /*
  * Comlimentary to ioremap().
@@ -141,6 +142,7 @@ void iounmap(volatile void __iomem *virtual)
 		kfree(res);
 	}
 }
+EXPORT_SYMBOL(iounmap);
 
 void __iomem *of_ioremap(struct resource *res, unsigned long offset,
 			 unsigned long size, char *name)
@@ -237,6 +239,7 @@ void sbus_set_sbus64(struct device *dev, int x)
 {
 	printk("sbus_set_sbus64: unsupported\n");
 }
+EXPORT_SYMBOL(sbus_set_sbus64);
 
 /*
  * Allocate a chunk of memory suitable for DMA.
@@ -436,6 +439,7 @@ void *pci_alloc_consistent(struct pci_dev *pdev, size_t len, dma_addr_t *pba)
 	*pba = virt_to_phys(va); /* equals virt_to_bus (R.I.P.) for us. */
 	return (void *) res->start;
 }
+EXPORT_SYMBOL(pci_alloc_consistent);
 
 /* Free and unmap a consistent DMA buffer.
  * cpu_addr is what was returned from pci_alloc_consistent,
@@ -477,6 +481,7 @@ void pci_free_consistent(struct pci_dev *pdev, size_t n, void *p, dma_addr_t ba)
 
 	free_pages(pgp, get_order(n));
 }
+EXPORT_SYMBOL(pci_free_consistent);
 
 /* Map a single buffer of the indicated size for DMA in streaming mode.
  * The 32-bit bus address to use is returned.
@@ -491,6 +496,7 @@ dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size,
 	/* IIep is write-through, not flushing. */
 	return virt_to_phys(ptr);
 }
+EXPORT_SYMBOL(pci_map_single);
 
 /* Unmap a single streaming mode DMA translation.  The dma_addr and size
  * must match what was provided for in a previous pci_map_single call.  All
@@ -508,6 +514,7 @@ void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t ba, size_t size,
 		    (size + PAGE_SIZE-1) & PAGE_MASK);
 	}
 }
+EXPORT_SYMBOL(pci_unmap_single);
 
 /*
  * Same as pci_map_single, but with pages.
@@ -519,6 +526,7 @@ dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
 	/* IIep is write-through, not flushing. */
 	return page_to_phys(page) + offset;
 }
+EXPORT_SYMBOL(pci_map_page);
 
 void pci_unmap_page(struct pci_dev *hwdev,
 			dma_addr_t dma_address, size_t size, int direction)
@@ -526,6 +534,7 @@ void pci_unmap_page(struct pci_dev *hwdev,
 	BUG_ON(direction == PCI_DMA_NONE);
 	/* mmu_inval_dma_area XXX */
 }
+EXPORT_SYMBOL(pci_unmap_page);
 
 /* Map a set of buffers described by scatterlist in streaming
  * mode for DMA.  This is the scather-gather version of the
@@ -557,6 +566,7 @@ int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
 	}
 	return nents;
 }
+EXPORT_SYMBOL(pci_map_sg);
 
 /* Unmap a set of streaming mode DMA translations.
  * Again, cpu read rules concerning calls here are the same as for
@@ -578,6 +588,7 @@ void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sgl, int nents,
 		}
 	}
 }
+EXPORT_SYMBOL(pci_unmap_sg);
 
 /* Make physical memory consistent for a single
  * streaming mode DMA translation before or after a transfer.
@@ -597,6 +608,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t ba, size_t si
 		    (size + PAGE_SIZE-1) & PAGE_MASK);
 	}
 }
+EXPORT_SYMBOL(pci_dma_sync_single_for_cpu);
 
 void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t ba, size_t size, int direction)
 {
@@ -606,6 +618,7 @@ void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t ba, size_t
 		    (size + PAGE_SIZE-1) & PAGE_MASK);
 	}
 }
+EXPORT_SYMBOL(pci_dma_sync_single_for_device);
 
 /* Make physical memory consistent for a set of streaming
  * mode DMA translations after a transfer.
@@ -628,6 +641,7 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sgl, int
 		}
 	}
 }
+EXPORT_SYMBOL(pci_dma_sync_sg_for_cpu);
 
 void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sgl, int nents, int direction)
 {
@@ -644,6 +658,7 @@ void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sgl,
 		}
 	}
 }
+EXPORT_SYMBOL(pci_dma_sync_sg_for_device);
 #endif /* CONFIG_PCI */
 
 #ifdef CONFIG_PROC_FS
diff --git a/arch/sparc/kernel/irq_32.c b/arch/sparc/kernel/irq_32.c
index 1eff942fe22..44dd5ee6433 100644
--- a/arch/sparc/kernel/irq_32.c
+++ b/arch/sparc/kernel/irq_32.c
@@ -294,6 +294,7 @@ void synchronize_irq(unsigned int irq)
 	while (sparc_irq[cpu_irq].flags & SPARC_IRQ_INPROGRESS)
 		cpu_relax();
 }
+EXPORT_SYMBOL(synchronize_irq);
 #endif /* SMP */
 
 void unexpected_irq(int irq, void *dev_id, struct pt_regs * regs)
diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c
index 75ed98be3ed..85e7037429b 100644
--- a/arch/sparc/kernel/pcic.c
+++ b/arch/sparc/kernel/pcic.c
@@ -956,6 +956,7 @@ void outsb(unsigned long addr, const void *src, unsigned long count)
 		/* addr += 1; */
 	}
 }
+EXPORT_SYMBOL(outsb);
 
 void outsw(unsigned long addr, const void *src, unsigned long count)
 {
@@ -966,6 +967,7 @@ void outsw(unsigned long addr, const void *src, unsigned long count)
 		/* addr += 2; */
 	}
 }
+EXPORT_SYMBOL(outsw);
 
 void outsl(unsigned long addr, const void *src, unsigned long count)
 {
@@ -976,6 +978,7 @@ void outsl(unsigned long addr, const void *src, unsigned long count)
 		/* addr += 4; */
 	}
 }
+EXPORT_SYMBOL(outsl);
 
 void insb(unsigned long addr, void *dst, unsigned long count)
 {
@@ -986,6 +989,7 @@ void insb(unsigned long addr, void *dst, unsigned long count)
 		/* addr += 1; */
 	}
 }
+EXPORT_SYMBOL(insb);
 
 void insw(unsigned long addr, void *dst, unsigned long count)
 {
@@ -996,6 +1000,7 @@ void insw(unsigned long addr, void *dst, unsigned long count)
 		/* addr += 2; */
 	}
 }
+EXPORT_SYMBOL(insw);
 
 void insl(unsigned long addr, void *dst, unsigned long count)
 {
@@ -1009,5 +1014,6 @@ void insl(unsigned long addr, void *dst, unsigned long count)
 		/* addr += 4; */
 	}
 }
+EXPORT_SYMBOL(insl);
 
 subsys_initcall(pcic_init);
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 5a8d8ced33d..f4bee35a1b4 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -44,6 +44,7 @@
  * Set in pm platform drivers (apc.c and pmc.c)
  */
 void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
 
 /* 
  * Power-off handler instantiation for pm.h compliance
@@ -673,6 +674,7 @@ pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 			     "g1", "g2", "g3", "o0", "o1", "memory", "cc");
 	return retval;
 }
+EXPORT_SYMBOL(kernel_thread);
 
 unsigned long get_wchan(struct task_struct *task)
 {
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index c96c65d1b58..998cadb4e7f 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -199,7 +199,9 @@ extern unsigned short ram_flags;
 extern int root_mountflags;
 
 char reboot_command[COMMAND_LINE_SIZE];
+
 enum sparc_cpu sparc_cpu_model;
+EXPORT_SYMBOL(sparc_cpu_model);
 
 struct tt_entry *sparc_ttable;
 
@@ -391,6 +393,7 @@ void sun_do_break(void)
 
 	prom_cmdline();
 }
+EXPORT_SYMBOL(sun_do_break);
 
 int stop_a_enabled = 1;
 
diff --git a/arch/sparc/kernel/sparc_ksyms_32.c b/arch/sparc/kernel/sparc_ksyms_32.c
index f4ee14de8db..8397871365a 100644
--- a/arch/sparc/kernel/sparc_ksyms_32.c
+++ b/arch/sparc/kernel/sparc_ksyms_32.c
@@ -9,42 +9,12 @@
 
 #include <linux/module.h>
 #include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/in6.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <linux/syscalls.h>
-#ifdef CONFIG_PCI
-#include <linux/pci.h>
-#endif
-#include <linux/pm.h>
-#ifdef CONFIG_HIGHMEM
-#include <linux/highmem.h>
-#endif
 
-#include <asm/oplib.h>
-#include <asm/delay.h>
-#include <asm/system.h>
-#include <asm/auxio.h>
 #include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/idprom.h>
-#include <asm/head.h>
-#include <asm/smp.h>
-#include <asm/ptrace.h>
 #include <asm/uaccess.h>
-#include <asm/checksum.h>
-#ifdef CONFIG_SBUS
+#include <asm/delay.h>
+#include <asm/head.h>
 #include <asm/dma.h>
-#endif
-#include <asm/io-unit.h>
-#include <asm/bug.h>
-
-extern spinlock_t rtc_lock;
 
 struct poll {
 	int fd;
@@ -52,29 +22,15 @@ struct poll {
 	short revents;
 };
 
-/* used by various drivers */
-EXPORT_SYMBOL(sparc_cpu_model);
-EXPORT_SYMBOL(kernel_thread);
-
-EXPORT_SYMBOL(sparc_valid_addr_bitmap);
-EXPORT_SYMBOL(phys_base);
-EXPORT_SYMBOL(pfn_base);
-
-/* Per-CPU information table */
-EXPORT_PER_CPU_SYMBOL(__cpu_data);
-
-#ifdef CONFIG_SMP
-/* IRQ implementation. */
-EXPORT_SYMBOL(synchronize_irq);
-#endif
-
+/* from entry.S */
 EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
-EXPORT_SYMBOL(rtc_lock);
-EXPORT_SYMBOL(set_auxio);
-EXPORT_SYMBOL(get_auxio);
-EXPORT_SYMBOL(io_remap_pfn_range);
 
+/* from head_32.S */
+EXPORT_SYMBOL(__ret_efault);
+EXPORT_SYMBOL(empty_zero_page);
+
+/* Defined using magic */
 #ifndef CONFIG_SMP
 EXPORT_SYMBOL(BTFIXUP_CALL(___xchg32));
 #else
@@ -86,82 +42,7 @@ EXPORT_SYMBOL(BTFIXUP_CALL(mmu_get_scsi_sgl));
 EXPORT_SYMBOL(BTFIXUP_CALL(mmu_get_scsi_one));
 EXPORT_SYMBOL(BTFIXUP_CALL(mmu_release_scsi_sgl));
 EXPORT_SYMBOL(BTFIXUP_CALL(mmu_release_scsi_one));
-
 EXPORT_SYMBOL(BTFIXUP_CALL(pgprot_noncached));
 
-#ifdef CONFIG_SBUS
-EXPORT_SYMBOL(sbus_set_sbus64);
-#endif
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(insb);
-EXPORT_SYMBOL(outsb);
-EXPORT_SYMBOL(insw);
-EXPORT_SYMBOL(outsw);
-EXPORT_SYMBOL(insl);
-EXPORT_SYMBOL(outsl);
-EXPORT_SYMBOL(pci_alloc_consistent);
-EXPORT_SYMBOL(pci_free_consistent);
-EXPORT_SYMBOL(pci_map_single);
-EXPORT_SYMBOL(pci_unmap_single);
-EXPORT_SYMBOL(pci_dma_sync_single_for_cpu);
-EXPORT_SYMBOL(pci_dma_sync_single_for_device);
-EXPORT_SYMBOL(pci_dma_sync_sg_for_cpu);
-EXPORT_SYMBOL(pci_dma_sync_sg_for_device);
-EXPORT_SYMBOL(pci_map_sg);
-EXPORT_SYMBOL(pci_unmap_sg);
-EXPORT_SYMBOL(pci_map_page);
-EXPORT_SYMBOL(pci_unmap_page);
-/* Actually, ioremap/iounmap are not PCI specific. But it is ok for drivers. */
-EXPORT_SYMBOL(ioremap);
-EXPORT_SYMBOL(iounmap);
-#endif
-
-/* in arch/sparc/mm/highmem.c */
-#ifdef CONFIG_HIGHMEM
-EXPORT_SYMBOL(kmap_atomic);
-EXPORT_SYMBOL(kunmap_atomic);
-#endif
-
-/* prom symbols */
-EXPORT_SYMBOL(idprom);
-EXPORT_SYMBOL(prom_root_node);
-EXPORT_SYMBOL(prom_getchild);
-EXPORT_SYMBOL(prom_getsibling);
-EXPORT_SYMBOL(prom_searchsiblings);
-EXPORT_SYMBOL(prom_firstprop);
-EXPORT_SYMBOL(prom_nextprop);
-EXPORT_SYMBOL(prom_getproplen);
-EXPORT_SYMBOL(prom_getproperty);
-EXPORT_SYMBOL(prom_node_has_property);
-EXPORT_SYMBOL(prom_setprop);
+/* Exporting a symbol from /init/main.c */
 EXPORT_SYMBOL(saved_command_line);
-EXPORT_SYMBOL(prom_apply_obio_ranges);
-EXPORT_SYMBOL(prom_feval);
-EXPORT_SYMBOL(prom_getbool);
-EXPORT_SYMBOL(prom_getstring);
-EXPORT_SYMBOL(prom_getint);
-EXPORT_SYMBOL(prom_getintdefault);
-EXPORT_SYMBOL(prom_finddevice);
-EXPORT_SYMBOL(romvec);
-EXPORT_SYMBOL(__prom_getchild);
-EXPORT_SYMBOL(__prom_getsibling);
-
-/* sparc library symbols */
-EXPORT_SYMBOL(page_kernel);
-
-/* Cache flushing.  */
-EXPORT_SYMBOL(sparc_flush_page_to_ram);
-
-/* For when serial stuff is built as modules. */
-EXPORT_SYMBOL(sun_do_break);
-
-EXPORT_SYMBOL(__ret_efault);
-
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-EXPORT_SYMBOL(do_BUG);
-#endif
-
-/* Sun Power Management Idle Handler */
-EXPORT_SYMBOL(pm_idle);
-
-EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/sparc/kernel/sparc_ksyms_64.c b/arch/sparc/kernel/sparc_ksyms_64.c
index 09874eaf0fb..62b5a91cd6b 100644
--- a/arch/sparc/kernel/sparc_ksyms_64.c
+++ b/arch/sparc/kernel/sparc_ksyms_64.c
@@ -29,7 +29,6 @@
 #include <asm/pgtable.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/idprom.h>
 #include <asm/elf.h>
 #include <asm/head.h>
 #include <asm/smp.h>
@@ -67,9 +66,6 @@ extern int __ashrdi3(int, int);
 
 extern int dump_fpu (struct pt_regs * regs, elf_fpregset_t * fpregs);
 
-/* Per-CPU information table */
-EXPORT_PER_CPU_SYMBOL(__cpu_data);
-
 /* used by various drivers */
 #ifdef CONFIG_SMP
 /* Out of line rw-locking implementation. */
@@ -134,7 +130,6 @@ EXPORT_SYMBOL(die_if_kernel);
 EXPORT_SYMBOL(kernel_thread);
 
 /* prom symbols */
-EXPORT_SYMBOL(idprom);
 EXPORT_SYMBOL(prom_root_node);
 EXPORT_SYMBOL(prom_getchild);
 EXPORT_SYMBOL(prom_getsibling);
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 00f7383c765..614ac7b4a9d 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -48,6 +48,8 @@
 #include "irq.h"
 
 DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
 static int set_rtc_mmss(unsigned long);
 static int sbus_do_settimeofday(struct timespec *tv);
 
diff --git a/arch/sparc/kernel/traps_32.c b/arch/sparc/kernel/traps_32.c
index 213645be6e9..358283341b4 100644
--- a/arch/sparc/kernel/traps_32.c
+++ b/arch/sparc/kernel/traps_32.c
@@ -424,6 +424,7 @@ void do_BUG(const char *file, int line)
         // bust_spinlocks(1);   XXX Not in our original BUG()
         printk("kernel BUG at %s:%d!\n", file, line);
 }
+EXPORT_SYMBOL(do_BUG);
 #endif
 
 /* Since we have our mappings set up, on multiprocessors we can spin them
diff --git a/arch/sparc/mm/generic_32.c b/arch/sparc/mm/generic_32.c
index a289261da9f..5edcac184ea 100644
--- a/arch/sparc/mm/generic_32.c
+++ b/arch/sparc/mm/generic_32.c
@@ -95,3 +95,4 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 	flush_tlb_range(vma, beg, end);
 	return error;
 }
+EXPORT_SYMBOL(io_remap_pfn_range);
diff --git a/arch/sparc/mm/highmem.c b/arch/sparc/mm/highmem.c
index 01fc6c25429..752d0c9fb54 100644
--- a/arch/sparc/mm/highmem.c
+++ b/arch/sparc/mm/highmem.c
@@ -62,6 +62,7 @@ void *kmap_atomic(struct page *page, enum km_type type)
 
 	return (void*) vaddr;
 }
+EXPORT_SYMBOL(kmap_atomic);
 
 void kunmap_atomic(void *kvaddr, enum km_type type)
 {
@@ -98,6 +99,7 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 
 	pagefault_enable();
 }
+EXPORT_SYMBOL(kunmap_atomic);
 
 /* We may be fed a pagetable here by ptep_to_xxx and others. */
 struct page *kmap_atomic_to_page(void *ptr)
diff --git a/arch/sparc/mm/init_32.c b/arch/sparc/mm/init_32.c
index fec926021f4..cbb282dab5a 100644
--- a/arch/sparc/mm/init_32.c
+++ b/arch/sparc/mm/init_32.c
@@ -38,11 +38,16 @@
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
 unsigned long *sparc_valid_addr_bitmap;
+EXPORT_SYMBOL(sparc_valid_addr_bitmap);
 
 unsigned long phys_base;
+EXPORT_SYMBOL(phys_base);
+
 unsigned long pfn_base;
+EXPORT_SYMBOL(pfn_base);
 
 unsigned long page_kernel;
+EXPORT_SYMBOL(page_kernel);
 
 struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
 unsigned long sparc_unmapped_base;
@@ -522,3 +527,4 @@ void sparc_flush_page_to_ram(struct page *page)
 	if (vaddr)
 		__flush_page_to_ram(vaddr);
 }
+EXPORT_SYMBOL(sparc_flush_page_to_ram);
diff --git a/arch/sparc/prom/init_32.c b/arch/sparc/prom/init_32.c
index 873217c6d82..6193c33ed4d 100644
--- a/arch/sparc/prom/init_32.c
+++ b/arch/sparc/prom/init_32.c
@@ -8,16 +8,20 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/module.h>
 
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 
 struct linux_romvec *romvec;
+EXPORT_SYMBOL(romvec);
+
 enum prom_major_version prom_vers;
 unsigned int prom_rev, prom_prev;
 
 /* The root node of the prom device tree. */
 int prom_root_node;
+EXPORT_SYMBOL(prom_root_node);
 
 /* Pointer to the device tree operations structure. */
 struct linux_nodeops *prom_nodeops;
diff --git a/arch/sparc/prom/misc_32.c b/arch/sparc/prom/misc_32.c
index cf6c3f6d36c..4d61c540bb3 100644
--- a/arch/sparc/prom/misc_32.c
+++ b/arch/sparc/prom/misc_32.c
@@ -8,6 +8,8 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/module.h>
+
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 #include <asm/auxio.h>
@@ -44,6 +46,7 @@ prom_feval(char *fstring)
 	restore_current();
 	spin_unlock_irqrestore(&prom_lock, flags);
 }
+EXPORT_SYMBOL(prom_feval);
 
 /* Drop into the prom, with the chance to continue with the 'go'
  * prom command.
diff --git a/arch/sparc/prom/ranges.c b/arch/sparc/prom/ranges.c
index 64579a37641..cd5790853ff 100644
--- a/arch/sparc/prom/ranges.c
+++ b/arch/sparc/prom/ranges.c
@@ -6,6 +6,8 @@
  */
 
 #include <linux/init.h>
+#include <linux/module.h>
+
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 #include <asm/types.h>
@@ -62,6 +64,7 @@ prom_apply_obio_ranges(struct linux_prom_registers *regs, int nregs)
 	if(num_obio_ranges)
 		prom_adjust_regs(regs, nregs, promlib_obio_ranges, num_obio_ranges);
 }
+EXPORT_SYMBOL(prom_apply_obio_ranges);
 
 void __init prom_ranges_init(void)
 {
diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c
index 6d818735733..9d9965cd8bc 100644
--- a/arch/sparc/prom/tree_32.c
+++ b/arch/sparc/prom/tree_32.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/ctype.h>
+#include <linux/module.h>
 
 #include <asm/openprom.h>
 #include <asm/oplib.h>
@@ -33,6 +34,7 @@ int __prom_getchild(int node)
 
 	return cnode;
 }
+EXPORT_SYMBOL(__prom_getchild);
 
 /* Return the child of node 'node' or zero if no this node has no
  * direct descendent.
@@ -50,6 +52,7 @@ int prom_getchild(int node)
 
 	return cnode;
 }
+EXPORT_SYMBOL(prom_getchild);
 
 /* Internal version of prom_getsibling that does not alter return values. */
 int __prom_getsibling(int node)
@@ -64,6 +67,7 @@ int __prom_getsibling(int node)
 
 	return cnode;
 }
+EXPORT_SYMBOL(__prom_getsibling);
 
 /* Return the next sibling of node 'node' or zero if no more siblings
  * at this level of depth in the tree.
@@ -81,6 +85,7 @@ int prom_getsibling(int node)
 
 	return sibnode;
 }
+EXPORT_SYMBOL(prom_getsibling);
 
 /* Return the length in bytes of property 'prop' at node 'node'.
  * Return -1 on error.
@@ -99,6 +104,7 @@ int prom_getproplen(int node, const char *prop)
 	spin_unlock_irqrestore(&prom_lock, flags);
 	return ret;
 }
+EXPORT_SYMBOL(prom_getproplen);
 
 /* Acquire a property 'prop' at node 'node' and place it in
  * 'buffer' which has a size of 'bufsize'.  If the acquisition
@@ -119,6 +125,7 @@ int prom_getproperty(int node, const char *prop, char *buffer, int bufsize)
 	spin_unlock_irqrestore(&prom_lock, flags);
 	return ret;
 }
+EXPORT_SYMBOL(prom_getproperty);
 
 /* Acquire an integer property and return its value.  Returns -1
  * on failure.
@@ -132,6 +139,7 @@ int prom_getint(int node, char *prop)
 
 	return -1;
 }
+EXPORT_SYMBOL(prom_getint);
 
 /* Acquire an integer property, upon error return the passed default
  * integer.
@@ -145,6 +153,7 @@ int prom_getintdefault(int node, char *property, int deflt)
 
 	return retval;
 }
+EXPORT_SYMBOL(prom_getintdefault);
 
 /* Acquire a boolean property, 1=TRUE 0=FALSE. */
 int prom_getbool(int node, char *prop)
@@ -155,6 +164,7 @@ int prom_getbool(int node, char *prop)
 	if(retval == -1) return 0;
 	return 1;
 }
+EXPORT_SYMBOL(prom_getbool);
 
 /* Acquire a property whose value is a string, returns a null
  * string on error.  The char pointer is the user supplied string
@@ -169,6 +179,7 @@ void prom_getstring(int node, char *prop, char *user_buf, int ubuf_size)
 	user_buf[0] = 0;
 	return;
 }
+EXPORT_SYMBOL(prom_getstring);
 
 
 /* Does the device at node 'node' have name 'name'?
@@ -204,6 +215,7 @@ int prom_searchsiblings(int node_start, char *nodename)
 
 	return 0;
 }
+EXPORT_SYMBOL(prom_searchsiblings);
 
 /* Interal version of nextprop that does not alter return values. */
 char * __prom_nextprop(int node, char * oprop)
@@ -228,6 +240,7 @@ char * prom_firstprop(int node, char *bufer)
 
 	return __prom_nextprop(node, "");
 }
+EXPORT_SYMBOL(prom_firstprop);
 
 /* Return the property type string after property type 'oprop'
  * at node 'node' .  Returns empty string if no more
@@ -240,6 +253,7 @@ char * prom_nextprop(int node, char *oprop, char *buffer)
 
 	return __prom_nextprop(node, oprop);
 }
+EXPORT_SYMBOL(prom_nextprop);
 
 int prom_finddevice(char *name)
 {
@@ -287,6 +301,7 @@ int prom_finddevice(char *name)
 	}
 	return node;
 }
+EXPORT_SYMBOL(prom_finddevice);
 
 int prom_node_has_property(int node, char *prop)
 {
@@ -299,6 +314,7 @@ int prom_node_has_property(int node, char *prop)
 	} while (*current_property);
 	return 0;
 }
+EXPORT_SYMBOL(prom_node_has_property);
 
 /* Set property 'pname' at node 'node' to value 'value' which has a length
  * of 'size' bytes.  Return the number of bytes the prom accepted.
@@ -316,6 +332,7 @@ int prom_setprop(int node, const char *pname, char *value, int size)
 	spin_unlock_irqrestore(&prom_lock, flags);
 	return ret;
 }
+EXPORT_SYMBOL(prom_setprop);
 
 int prom_inst2pkg(int inst)
 {
-- 
GitLab


From 917c3660d6d9a4b073a3db7c10f6989adae4e191 Mon Sep 17 00:00:00 2001
From: Sam Ravnborg <sam@ravnborg.org>
Date: Thu, 8 Jan 2009 16:58:20 -0800
Subject: [PATCH 030/492] sparc64: move EXPORT_SYMBOL to the symbols definition

Move all applicable EXPORT_SYMBOL()s to the file where the respective
symbol is defined.

Removed all the includes that are no longer needed in sparc_ksyms_64.c

Comment all remaining EXPORT_SYMBOL()s in sparc_ksyms_64.c

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Additions by Julian Calaby:
* Moved EXPORT_SYMBOL()s for prom functions to their rightful places.
* Made some minor cleanups to the includes and comments of sparc_ksyms_64.c
* Updated and tidied commit message.
* Rebased patch over sparc-2.6.git HEAD.
* Ensured that all modified files have the correct includes.

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/auxio_64.c       |   2 +
 arch/sparc/kernel/pci.c            |   1 +
 arch/sparc/kernel/process_64.c     |   2 +
 arch/sparc/kernel/sbus.c           |   1 +
 arch/sparc/kernel/setup_64.c       |   3 +
 arch/sparc/kernel/sparc_ksyms_64.c | 136 +++--------------------------
 arch/sparc/kernel/sys_sparc_64.c   |   2 +
 arch/sparc/kernel/time_64.c        |   2 +
 arch/sparc/kernel/traps_64.c       |   2 +
 arch/sparc/lib/PeeCeeI.c           |   8 ++
 arch/sparc/lib/user_fixup.c        |   5 ++
 arch/sparc/mm/generic_64.c         |   1 +
 arch/sparc/mm/init_64.c            |   4 +
 arch/sparc/prom/misc_64.c          |   3 +
 arch/sparc/prom/tree_64.c          |  20 ++++-
 15 files changed, 66 insertions(+), 126 deletions(-)

diff --git a/arch/sparc/kernel/auxio_64.c b/arch/sparc/kernel/auxio_64.c
index 8b67347d422..9f52db2d441 100644
--- a/arch/sparc/kernel/auxio_64.c
+++ b/arch/sparc/kernel/auxio_64.c
@@ -72,6 +72,7 @@ void auxio_set_led(int on)
 	bit = (ebus ? AUXIO_PCIO_LED : AUXIO_AUX1_LED);
 	__auxio_set_bit(bit, on, ebus);
 }
+EXPORT_SYMBOL(auxio_set_led);
 
 static void __auxio_sbus_set_lte(int on)
 {
@@ -90,6 +91,7 @@ void auxio_set_lte(int on)
 		break;
 	}
 }
+EXPORT_SYMBOL(auxio_set_lte);
 
 static struct of_device_id __initdata auxio_match[] = {
 	{
diff --git a/arch/sparc/kernel/pci.c b/arch/sparc/kernel/pci.c
index 923e9bbb9fe..4638fba799e 100644
--- a/arch/sparc/kernel/pci.c
+++ b/arch/sparc/kernel/pci.c
@@ -1077,6 +1077,7 @@ int pci_dma_supported(struct pci_dev *pdev, u64 device_mask)
 
 	return (device_mask & dma_addr_mask) == dma_addr_mask;
 }
+EXPORT_SYMBOL(pci_dma_supported);
 
 void pci_resource_to_user(const struct pci_dev *pdev, int bar,
 			  const struct resource *rp, resource_size_t *start,
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index d5e2acef987..cc8b5604442 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -678,6 +678,7 @@ pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 			     "g1", "g2", "g3", "o0", "o1", "memory", "cc");
 	return retval;
 }
+EXPORT_SYMBOL(kernel_thread);
 
 typedef struct {
 	union {
@@ -743,6 +744,7 @@ int dump_fpu (struct pt_regs * regs, elf_fpregset_t * fpregs)
 	}
 	return 1;
 }
+EXPORT_SYMBOL(dump_fpu);
 
 /*
  * sparc_execve() executes a new program after the asm stub has set
diff --git a/arch/sparc/kernel/sbus.c b/arch/sparc/kernel/sbus.c
index 2ead310066d..406e0872504 100644
--- a/arch/sparc/kernel/sbus.c
+++ b/arch/sparc/kernel/sbus.c
@@ -117,6 +117,7 @@ void sbus_set_sbus64(struct device *dev, int bursts)
 		val |= (1UL << 4UL);
 	upa_writeq(val, cfg_reg);
 }
+EXPORT_SYMBOL(sbus_set_sbus64);
 
 /* INO number to IMAP register offset for SYSIO external IRQ's.
  * This should conform to both Sunfire/Wildfire server and Fusion
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 555db7452eb..49d061f4ae9 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -58,6 +58,7 @@
  * operations in asm/ns87303.h
  */
 DEFINE_SPINLOCK(ns87303_lock);
+EXPORT_SYMBOL(ns87303_lock);
 
 struct screen_info screen_info = {
 	0, 0,			/* orig-x, orig-y */
@@ -425,5 +426,7 @@ void sun_do_break(void)
 
 	prom_cmdline();
 }
+EXPORT_SYMBOL(sun_do_break);
 
 int stop_a_enabled = 1;
+EXPORT_SYMBOL(stop_a_enabled);
diff --git a/arch/sparc/kernel/sparc_ksyms_64.c b/arch/sparc/kernel/sparc_ksyms_64.c
index 62b5a91cd6b..e92ad122382 100644
--- a/arch/sparc/kernel/sparc_ksyms_64.c
+++ b/arch/sparc/kernel/sparc_ksyms_64.c
@@ -8,43 +8,15 @@
 #define PROMLIB_INTERNAL
 
 #include <linux/module.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/in6.h>
 #include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/fs_struct.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/syscalls.h>
-#include <linux/percpu.h>
 #include <linux/init.h>
-#include <linux/rwsem.h>
-#include <net/compat.h>
 
-#include <asm/oplib.h>
+#include <asm/spinlock.h>
 #include <asm/system.h>
-#include <asm/auxio.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/elf.h>
-#include <asm/head.h>
-#include <asm/smp.h>
-#include <asm/ptrace.h>
-#include <asm/uaccess.h>
-#include <asm/checksum.h>
-#include <asm/fpumacro.h>
-#include <asm/pgalloc.h>
-#include <asm/cacheflush.h>
-#ifdef CONFIG_SBUS
-#include <asm/dma.h>
-#endif
-#include <asm/ns87303.h>
-#include <asm/timer.h>
 #include <asm/cpudata.h>
-#include <asm/ftrace.h>
+#include <asm/uaccess.h>
+#include <asm/spitfire.h>
+#include <asm/oplib.h>
 #include <asm/hypervisor.h>
 
 struct poll {
@@ -53,19 +25,6 @@ struct poll {
 	short revents;
 };
 
-extern void die_if_kernel(char *str, struct pt_regs *regs);
-extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
-extern void sys_sigsuspend(void);
-extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg);
-extern int (*handle_mathemu)(struct pt_regs *, struct fpustate *);
-extern long sparc32_open(const char __user * filename, int flags, int mode);
-extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
-	unsigned long pfn, unsigned long size, pgprot_t prot);
-
-extern int __ashrdi3(int, int);
-
-extern int dump_fpu (struct pt_regs * regs, elf_fpregset_t * fpregs);
-
 /* used by various drivers */
 #ifdef CONFIG_SMP
 /* Out of line rw-locking implementation. */
@@ -76,37 +35,24 @@ EXPORT_SYMBOL(__write_unlock);
 EXPORT_SYMBOL(__write_trylock);
 #endif /* CONFIG_SMP */
 
-EXPORT_SYMBOL(sparc64_get_clock_tick);
-
+/* from helpers.S */
 EXPORT_SYMBOL(__flushw_user);
+EXPORT_SYMBOL_GPL(real_hard_smp_processor_id);
 
+/* from head_64.S */
+EXPORT_SYMBOL(__ret_efault);
 EXPORT_SYMBOL(tlb_type);
 EXPORT_SYMBOL(sun4v_chip_type);
-EXPORT_SYMBOL(get_fb_unmapped_area);
-EXPORT_SYMBOL(flush_icache_range);
-
-EXPORT_SYMBOL(flush_dcache_page);
-#ifdef DCACHE_ALIASING_POSSIBLE
-EXPORT_SYMBOL(__flush_dcache_range);
-#endif
+EXPORT_SYMBOL(prom_root_node);
 
+/* from hvcalls.S */
 EXPORT_SYMBOL(sun4v_niagara_getperf);
 EXPORT_SYMBOL(sun4v_niagara_setperf);
 EXPORT_SYMBOL(sun4v_niagara2_getperf);
 EXPORT_SYMBOL(sun4v_niagara2_setperf);
 
-EXPORT_SYMBOL(auxio_set_led);
-EXPORT_SYMBOL(auxio_set_lte);
-#ifdef CONFIG_SBUS
-EXPORT_SYMBOL(sbus_set_sbus64);
-#endif
-EXPORT_SYMBOL(outsb);
-EXPORT_SYMBOL(outsw);
-EXPORT_SYMBOL(outsl);
-EXPORT_SYMBOL(insb);
-EXPORT_SYMBOL(insw);
-EXPORT_SYMBOL(insl);
 #ifdef CONFIG_PCI
+/* inline functions in asm/pci_64.h */
 EXPORT_SYMBOL(pci_alloc_consistent);
 EXPORT_SYMBOL(pci_free_consistent);
 EXPORT_SYMBOL(pci_map_single);
@@ -115,65 +61,7 @@ EXPORT_SYMBOL(pci_map_sg);
 EXPORT_SYMBOL(pci_unmap_sg);
 EXPORT_SYMBOL(pci_dma_sync_single_for_cpu);
 EXPORT_SYMBOL(pci_dma_sync_sg_for_cpu);
-EXPORT_SYMBOL(pci_dma_supported);
 #endif
 
-/* I/O device mmaping on Sparc64. */
-EXPORT_SYMBOL(io_remap_pfn_range);
-
-EXPORT_SYMBOL(dump_fpu);
-
-/* math-emu wants this */
-EXPORT_SYMBOL(die_if_kernel);
-
-/* Kernel thread creation. */
-EXPORT_SYMBOL(kernel_thread);
-
-/* prom symbols */
-EXPORT_SYMBOL(prom_root_node);
-EXPORT_SYMBOL(prom_getchild);
-EXPORT_SYMBOL(prom_getsibling);
-EXPORT_SYMBOL(prom_searchsiblings);
-EXPORT_SYMBOL(prom_firstprop);
-EXPORT_SYMBOL(prom_nextprop);
-EXPORT_SYMBOL(prom_getproplen);
-EXPORT_SYMBOL(prom_getproperty);
-EXPORT_SYMBOL(prom_node_has_property);
-EXPORT_SYMBOL(prom_setprop);
+/* Exporting a symbol from /init/main.c */
 EXPORT_SYMBOL(saved_command_line);
-EXPORT_SYMBOL(prom_finddevice);
-EXPORT_SYMBOL(prom_feval);
-EXPORT_SYMBOL(prom_getbool);
-EXPORT_SYMBOL(prom_getstring);
-EXPORT_SYMBOL(prom_getint);
-EXPORT_SYMBOL(prom_getintdefault);
-EXPORT_SYMBOL(__prom_getchild);
-EXPORT_SYMBOL(__prom_getsibling);
-
-/* Moving data to/from/in userspace. */
-EXPORT_SYMBOL(copy_to_user_fixup);
-EXPORT_SYMBOL(copy_from_user_fixup);
-EXPORT_SYMBOL(copy_in_user_fixup);
-
-/* Various address conversion macros use this. */
-EXPORT_SYMBOL(sparc64_valid_addr_bitmap);
-
-/* No version information on this, heavily used in inline asm,
- * and will always be 'void __ret_efault(void)'.
- */
-EXPORT_SYMBOL(__ret_efault);
-
-/* for input/keybdev */
-EXPORT_SYMBOL(sun_do_break);
-EXPORT_SYMBOL(stop_a_enabled);
-
-#ifdef CONFIG_DEBUG_BUGVERBOSE
-EXPORT_SYMBOL(do_BUG);
-#endif
-
-/* for ns8703 */
-EXPORT_SYMBOL(ns87303_lock);
-
-EXPORT_SYMBOL(tick_ops);
-
-EXPORT_SYMBOL_GPL(real_hard_smp_processor_id);
diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c
index 39749e32dc7..09058fc39e7 100644
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -23,6 +23,7 @@
 #include <linux/ipc.h>
 #include <linux/personality.h>
 #include <linux/random.h>
+#include <linux/module.h>
 
 #include <asm/uaccess.h>
 #include <asm/utrap.h>
@@ -354,6 +355,7 @@ unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr, u
 
 	return addr;
 }
+EXPORT_SYMBOL(get_fb_unmapped_area);
 
 /* Essentially the same as PowerPC... */
 void arch_pick_mmap_layout(struct mm_struct *mm)
diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c
index 54405d36214..2db3c2229b9 100644
--- a/arch/sparc/kernel/time_64.c
+++ b/arch/sparc/kernel/time_64.c
@@ -176,6 +176,7 @@ static struct sparc64_tick_ops tick_operations __read_mostly = {
 };
 
 struct sparc64_tick_ops *tick_ops __read_mostly = &tick_operations;
+EXPORT_SYMBOL(tick_ops);
 
 static void stick_disable_irq(void)
 {
@@ -639,6 +640,7 @@ unsigned long sparc64_get_clock_tick(unsigned int cpu)
 		return ft->clock_tick_ref;
 	return cpu_data(cpu).clock_tick;
 }
+EXPORT_SYMBOL(sparc64_get_clock_tick);
 
 #ifdef CONFIG_CPU_FREQ
 
diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c
index bca3b4e09c4..c2d153d4658 100644
--- a/arch/sparc/kernel/traps_64.c
+++ b/arch/sparc/kernel/traps_64.c
@@ -128,6 +128,7 @@ void do_BUG(const char *file, int line)
 	bust_spinlocks(1);
 	printk("kernel BUG at %s:%d!\n", file, line);
 }
+EXPORT_SYMBOL(do_BUG);
 #endif
 
 static DEFINE_SPINLOCK(dimm_handler_lock);
@@ -2261,6 +2262,7 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		do_exit(SIGKILL);
 	do_exit(SIGSEGV);
 }
+EXPORT_SYMBOL(die_if_kernel);
 
 #define VIS_OPCODE_MASK	((0x3 << 30) | (0x3f << 19))
 #define VIS_OPCODE_VAL	((0x2 << 30) | (0x36 << 19))
diff --git a/arch/sparc/lib/PeeCeeI.c b/arch/sparc/lib/PeeCeeI.c
index 46053e6ddd7..6529f865759 100644
--- a/arch/sparc/lib/PeeCeeI.c
+++ b/arch/sparc/lib/PeeCeeI.c
@@ -4,6 +4,8 @@
  * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
  */
 
+#include <linux/module.h>
+
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
@@ -15,6 +17,7 @@ void outsb(unsigned long __addr, const void *src, unsigned long count)
 	while (count--)
 		outb(*p++, addr);
 }
+EXPORT_SYMBOL(outsb);
 
 void outsw(unsigned long __addr, const void *src, unsigned long count)
 {
@@ -25,6 +28,7 @@ void outsw(unsigned long __addr, const void *src, unsigned long count)
 		src += sizeof(u16);
 	}
 }
+EXPORT_SYMBOL(outsw);
 
 void outsl(unsigned long __addr, const void *src, unsigned long count)
 {
@@ -78,6 +82,7 @@ void outsl(unsigned long __addr, const void *src, unsigned long count)
 		break;
 	}
 }
+EXPORT_SYMBOL(outsl);
 
 void insb(unsigned long __addr, void *dst, unsigned long count)
 {
@@ -105,6 +110,7 @@ void insb(unsigned long __addr, void *dst, unsigned long count)
 			*pb++ = inb(addr);
 	}
 }
+EXPORT_SYMBOL(insb);
 
 void insw(unsigned long __addr, void *dst, unsigned long count)
 {
@@ -132,6 +138,7 @@ void insw(unsigned long __addr, void *dst, unsigned long count)
 			*ps = le16_to_cpu(inw(addr));
 	}
 }
+EXPORT_SYMBOL(insw);
 
 void insl(unsigned long __addr, void *dst, unsigned long count)
 {
@@ -200,4 +207,5 @@ void insl(unsigned long __addr, void *dst, unsigned long count)
 		}
 	}
 }
+EXPORT_SYMBOL(insl);
 
diff --git a/arch/sparc/lib/user_fixup.c b/arch/sparc/lib/user_fixup.c
index 05a361b0a1a..ac96ae23670 100644
--- a/arch/sparc/lib/user_fixup.c
+++ b/arch/sparc/lib/user_fixup.c
@@ -7,6 +7,8 @@
 #include <linux/kernel.h>
 #include <linux/string.h>
 #include <linux/errno.h>
+#include <linux/module.h>
+
 #include <asm/uaccess.h>
 
 /* Calculating the exact fault address when using
@@ -40,6 +42,7 @@ unsigned long copy_from_user_fixup(void *to, const void __user *from, unsigned l
 
 	return size;
 }
+EXPORT_SYMBOL(copy_from_user_fixup);
 
 unsigned long copy_to_user_fixup(void __user *to, const void *from, unsigned long size)
 {
@@ -47,6 +50,7 @@ unsigned long copy_to_user_fixup(void __user *to, const void *from, unsigned lon
 
 	return compute_size((unsigned long) to, size, &offset);
 }
+EXPORT_SYMBOL(copy_to_user_fixup);
 
 unsigned long copy_in_user_fixup(void __user *to, void __user *from, unsigned long size)
 {
@@ -64,3 +68,4 @@ unsigned long copy_in_user_fixup(void __user *to, void __user *from, unsigned lo
 
 	return size;
 }
+EXPORT_SYMBOL(copy_in_user_fixup);
diff --git a/arch/sparc/mm/generic_64.c b/arch/sparc/mm/generic_64.c
index f362c203701..04f2bf4cd57 100644
--- a/arch/sparc/mm/generic_64.c
+++ b/arch/sparc/mm/generic_64.c
@@ -161,3 +161,4 @@ int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
 	flush_tlb_range(vma, beg, end);
 	return error;
 }
+EXPORT_SYMBOL(io_remap_pfn_range);
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index c77c7ef5d5d..00373ce2d8f 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -146,6 +146,7 @@ static void __init read_obp_memory(const char *property,
 }
 
 unsigned long *sparc64_valid_addr_bitmap __read_mostly;
+EXPORT_SYMBOL(sparc64_valid_addr_bitmap);
 
 /* Kernel physical address base and size in bytes.  */
 unsigned long kern_base __read_mostly;
@@ -369,6 +370,7 @@ void flush_dcache_page(struct page *page)
 out:
 	put_cpu();
 }
+EXPORT_SYMBOL(flush_dcache_page);
 
 void __kprobes flush_icache_range(unsigned long start, unsigned long end)
 {
@@ -396,6 +398,7 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end)
 		}
 	}
 }
+EXPORT_SYMBOL(flush_icache_range);
 
 void mmu_info(struct seq_file *m)
 {
@@ -599,6 +602,7 @@ void __flush_dcache_range(unsigned long start, unsigned long end)
 					       "i" (ASI_DCACHE_INVALIDATE));
 	}
 }
+EXPORT_SYMBOL(__flush_dcache_range);
 
 /* get_new_mmu_context() uses "cache + 1".  */
 DEFINE_SPINLOCK(ctx_alloc_lock);
diff --git a/arch/sparc/prom/misc_64.c b/arch/sparc/prom/misc_64.c
index 9b0c0760901..eedffb4fec2 100644
--- a/arch/sparc/prom/misc_64.c
+++ b/arch/sparc/prom/misc_64.c
@@ -11,6 +11,8 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/module.h>
+
 #include <asm/openprom.h>
 #include <asm/oplib.h>
 #include <asm/system.h>
@@ -54,6 +56,7 @@ void prom_feval(const char *fstring)
 	p1275_cmd("interpret", P1275_ARG(0, P1275_ARG_IN_STRING) |
 		  P1275_INOUT(1, 1), fstring);
 }
+EXPORT_SYMBOL(prom_feval);
 
 #ifdef CONFIG_SMP
 extern void smp_capture(void);
diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c
index 281aea44790..175c709e39a 100644
--- a/arch/sparc/prom/tree_64.c
+++ b/arch/sparc/prom/tree_64.c
@@ -10,6 +10,7 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 
 #include <asm/openprom.h>
 #include <asm/oplib.h>
@@ -22,6 +23,7 @@ inline int __prom_getchild(int node)
 {
 	return p1275_cmd ("child", P1275_INOUT(1, 1), node);
 }
+EXPORT_SYMBOL(__prom_getchild);
 
 inline int prom_getchild(int node)
 {
@@ -32,6 +34,7 @@ inline int prom_getchild(int node)
 	if(cnode == -1) return 0;
 	return (int)cnode;
 }
+EXPORT_SYMBOL(prom_getchild);
 
 inline int prom_getparent(int node)
 {
@@ -50,6 +53,7 @@ inline int __prom_getsibling(int node)
 {
 	return p1275_cmd(prom_peer_name, P1275_INOUT(1, 1), node);
 }
+EXPORT_SYMBOL(__prom_getsibling);
 
 inline int prom_getsibling(int node)
 {
@@ -63,6 +67,7 @@ inline int prom_getsibling(int node)
 
 	return sibnode;
 }
+EXPORT_SYMBOL(prom_getsibling);
 
 /* Return the length in bytes of property 'prop' at node 'node'.
  * Return -1 on error.
@@ -75,6 +80,7 @@ inline int prom_getproplen(int node, const char *prop)
 			  P1275_INOUT(2, 1), 
 			  node, prop);
 }
+EXPORT_SYMBOL(prom_getproplen);
 
 /* Acquire a property 'prop' at node 'node' and place it in
  * 'buffer' which has a size of 'bufsize'.  If the acquisition
@@ -97,6 +103,7 @@ inline int prom_getproperty(int node, const char *prop,
 				 node, prop, buffer, P1275_SIZE(plen));
 	}
 }
+EXPORT_SYMBOL(prom_getproperty);
 
 /* Acquire an integer property and return its value.  Returns -1
  * on failure.
@@ -110,6 +117,7 @@ inline int prom_getint(int node, const char *prop)
 
 	return -1;
 }
+EXPORT_SYMBOL(prom_getint);
 
 /* Acquire an integer property, upon error return the passed default
  * integer.
@@ -124,6 +132,7 @@ int prom_getintdefault(int node, const char *property, int deflt)
 
 	return retval;
 }
+EXPORT_SYMBOL(prom_getintdefault);
 
 /* Acquire a boolean property, 1=TRUE 0=FALSE. */
 int prom_getbool(int node, const char *prop)
@@ -134,6 +143,7 @@ int prom_getbool(int node, const char *prop)
 	if(retval == -1) return 0;
 	return 1;
 }
+EXPORT_SYMBOL(prom_getbool);
 
 /* Acquire a property whose value is a string, returns a null
  * string on error.  The char pointer is the user supplied string
@@ -148,7 +158,7 @@ void prom_getstring(int node, const char *prop, char *user_buf, int ubuf_size)
 	user_buf[0] = 0;
 	return;
 }
-
+EXPORT_SYMBOL(prom_getstring);
 
 /* Does the device at node 'node' have name 'name'?
  * YES = 1   NO = 0
@@ -181,6 +191,7 @@ int prom_searchsiblings(int node_start, const char *nodename)
 
 	return 0;
 }
+EXPORT_SYMBOL(prom_searchsiblings);
 
 /* Return the first property type for node 'node'.
  * buffer should be at least 32B in length
@@ -194,6 +205,7 @@ inline char *prom_firstprop(int node, char *buffer)
 			       node, (char *) 0x0, buffer);
 	return buffer;
 }
+EXPORT_SYMBOL(prom_firstprop);
 
 /* Return the property type string after property type 'oprop'
  * at node 'node' .  Returns NULL string if no more
@@ -217,6 +229,7 @@ inline char *prom_nextprop(int node, const char *oprop, char *buffer)
 				    node, oprop, buffer); 
 	return buffer;
 }
+EXPORT_SYMBOL(prom_nextprop);
 
 int
 prom_finddevice(const char *name)
@@ -228,6 +241,7 @@ prom_finddevice(const char *name)
 			 P1275_INOUT(1, 1), 
 			 name);
 }
+EXPORT_SYMBOL(prom_finddevice);
 
 int prom_node_has_property(int node, const char *prop)
 {
@@ -241,7 +255,8 @@ int prom_node_has_property(int node, const char *prop)
 	} while (*buf);
 	return 0;
 }
-                                                                                           
+EXPORT_SYMBOL(prom_node_has_property);
+
 /* Set property 'pname' at node 'node' to value 'value' which has a length
  * of 'size' bytes.  Return the number of bytes the prom accepted.
  */
@@ -264,6 +279,7 @@ prom_setprop(int node, const char *pname, char *value, int size)
 					  P1275_INOUT(4, 1), 
 					  node, pname, value, P1275_SIZE(size));
 }
+EXPORT_SYMBOL(prom_setprop);
 
 inline int prom_inst2pkg(int inst)
 {
-- 
GitLab


From bc835978cfb5dbb904a9d2e13804b6c343743530 Mon Sep 17 00:00:00 2001
From: Julian Calaby <julian.calaby@gmail.com>
Date: Thu, 8 Jan 2009 16:58:42 -0800
Subject: [PATCH 031/492] sparc: Kill exports of prom internal functions

__prom_getchild() and __prom_getsibling() are not used anywhere, so
don't export them.

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/oplib_32.h | 11 -----------
 arch/sparc/include/asm/oplib_64.h | 10 ----------
 arch/sparc/prom/tree_32.c         |  2 --
 arch/sparc/prom/tree_64.c         |  2 --
 4 files changed, 25 deletions(-)

diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
index 73d45521db0..33e31ce6b31 100644
--- a/arch/sparc/include/asm/oplib_32.h
+++ b/arch/sparc/include/asm/oplib_32.h
@@ -177,17 +177,6 @@ extern void prom_putsegment(int context, unsigned long virt_addr,
 
 /* PROM device tree traversal functions... */
 
-#ifdef PROMLIB_INTERNAL
-
-/* Internal version of prom_getchild. */
-extern int __prom_getchild(int parent_node);
-
-/* Internal version of prom_getsibling. */
-extern int __prom_getsibling(int node);
-
-#endif
-
-
 /* Get the child node of the given node, or zero if no child exists. */
 extern int prom_getchild(int parent_node);
 
diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
index 6d2c2ca9803..a5db0317b5f 100644
--- a/arch/sparc/include/asm/oplib_64.h
+++ b/arch/sparc/include/asm/oplib_64.h
@@ -218,16 +218,6 @@ extern void prom_unmap(unsigned long size, unsigned long vaddr);
 
 /* PROM device tree traversal functions... */
 
-#ifdef PROMLIB_INTERNAL
-
-/* Internal version of prom_getchild. */
-extern int __prom_getchild(int parent_node);
-
-/* Internal version of prom_getsibling. */
-extern int __prom_getsibling(int node);
-
-#endif
-
 /* Get the child node of the given node, or zero if no child exists. */
 extern int prom_getchild(int parent_node);
 
diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c
index 9d9965cd8bc..431e04c364e 100644
--- a/arch/sparc/prom/tree_32.c
+++ b/arch/sparc/prom/tree_32.c
@@ -34,7 +34,6 @@ int __prom_getchild(int node)
 
 	return cnode;
 }
-EXPORT_SYMBOL(__prom_getchild);
 
 /* Return the child of node 'node' or zero if no this node has no
  * direct descendent.
@@ -67,7 +66,6 @@ int __prom_getsibling(int node)
 
 	return cnode;
 }
-EXPORT_SYMBOL(__prom_getsibling);
 
 /* Return the next sibling of node 'node' or zero if no more siblings
  * at this level of depth in the tree.
diff --git a/arch/sparc/prom/tree_64.c b/arch/sparc/prom/tree_64.c
index 175c709e39a..8ea73ddc61d 100644
--- a/arch/sparc/prom/tree_64.c
+++ b/arch/sparc/prom/tree_64.c
@@ -23,7 +23,6 @@ inline int __prom_getchild(int node)
 {
 	return p1275_cmd ("child", P1275_INOUT(1, 1), node);
 }
-EXPORT_SYMBOL(__prom_getchild);
 
 inline int prom_getchild(int node)
 {
@@ -53,7 +52,6 @@ inline int __prom_getsibling(int node)
 {
 	return p1275_cmd(prom_peer_name, P1275_INOUT(1, 1), node);
 }
-EXPORT_SYMBOL(__prom_getsibling);
 
 inline int prom_getsibling(int node)
 {
-- 
GitLab


From 222bfda032d01d99501257e01a79833094f689f6 Mon Sep 17 00:00:00 2001
From: Julian Calaby <julian.calaby@gmail.com>
Date: Thu, 8 Jan 2009 16:59:01 -0800
Subject: [PATCH 032/492] sparc: Eliminate PROMLIB_INTERNAL as it does nothing

Signed-off-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/sparc_ksyms_32.c | 2 --
 arch/sparc/kernel/sparc_ksyms_64.c | 2 --
 arch/sparc/prom/tree_32.c          | 2 --
 3 files changed, 6 deletions(-)

diff --git a/arch/sparc/kernel/sparc_ksyms_32.c b/arch/sparc/kernel/sparc_ksyms_32.c
index 8397871365a..baeab872023 100644
--- a/arch/sparc/kernel/sparc_ksyms_32.c
+++ b/arch/sparc/kernel/sparc_ksyms_32.c
@@ -5,8 +5,6 @@
  * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
  */
 
-#define PROMLIB_INTERNAL
-
 #include <linux/module.h>
 #include <linux/init.h>
 
diff --git a/arch/sparc/kernel/sparc_ksyms_64.c b/arch/sparc/kernel/sparc_ksyms_64.c
index e92ad122382..da8f804feb4 100644
--- a/arch/sparc/kernel/sparc_ksyms_64.c
+++ b/arch/sparc/kernel/sparc_ksyms_64.c
@@ -5,8 +5,6 @@
  * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
  */
 
-#define PROMLIB_INTERNAL
-
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/init.h>
diff --git a/arch/sparc/prom/tree_32.c b/arch/sparc/prom/tree_32.c
index 431e04c364e..646d244b1fd 100644
--- a/arch/sparc/prom/tree_32.c
+++ b/arch/sparc/prom/tree_32.c
@@ -5,8 +5,6 @@
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
  */
 
-#define PROMLIB_INTERNAL
-
 #include <linux/string.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-- 
GitLab


From c9a98553d513dfc82cdce869970d5662c1f22c68 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Thu, 1 Jan 2009 14:21:16 -0500
Subject: [PATCH 033/492] [XFS] pass XFS_IGET_BULKSTAT to xfs_iget for handle
 operations

NFS clients or users of the handle ioctls can pass us arbitrary inode
numbers through the exportfs interface.  Make sure we use the
XFS_IGET_BULKSTAT so that these don't cause shutdowns due to the corruption
checks.  Also translate the EINVAL we get back for invalid inode clusters
into an ESTALE which is more appropinquate, and remove the useless check
for a NULL inode on a successfull xfs_iget return.

I have a testcase to reproduce this using the handle interface which
I will submit to xfsqa.

Reported-by: Mario Becroft <mb@gem.win.co.nz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/linux-2.6/xfs_export.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_export.c b/fs/xfs/linux-2.6/xfs_export.c
index 595751f7835..87b8cbd23d4 100644
--- a/fs/xfs/linux-2.6/xfs_export.c
+++ b/fs/xfs/linux-2.6/xfs_export.c
@@ -126,11 +126,26 @@ xfs_nfs_get_inode(
 	if (ino == 0)
 		return ERR_PTR(-ESTALE);
 
-	error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0);
-	if (error)
+	/*
+	 * The XFS_IGET_BULKSTAT means that an invalid inode number is just
+	 * fine and not an indication of a corrupted filesystem.  Because
+	 * clients can send any kind of invalid file handle, e.g. after
+	 * a restore on the server we have to deal with this case gracefully.
+	 */
+	error = xfs_iget(mp, NULL, ino, XFS_IGET_BULKSTAT,
+			 XFS_ILOCK_SHARED, &ip, 0);
+	if (error) {
+		/*
+		 * EINVAL means the inode cluster doesn't exist anymore.
+		 * This implies the filehandle is stale, so we should
+		 * translate it here.
+		 * We don't use ESTALE directly down the chain to not
+		 * confuse applications using bulkstat that expect EINVAL.
+		 */
+		if (error == EINVAL)
+			error = ESTALE;
 		return ERR_PTR(-error);
-	if (!ip)
-		return ERR_PTR(-EIO);
+	}
 
 	if (ip->i_d.di_gen != generation) {
 		xfs_iput_new(ip, XFS_ILOCK_SHARED);
-- 
GitLab


From 9800b550355e99c9bcaba7ec6540751dce0823d7 Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@sandeen.net>
Date: Thu, 1 Jan 2009 16:40:10 -0600
Subject: [PATCH 034/492] [XFS] Remove several unused typedefs.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/linux-2.6/xfs_aops.h | 2 --
 fs/xfs/xfs_acl.h            | 1 -
 fs/xfs/xfs_types.h          | 2 --
 3 files changed, 5 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_aops.h b/fs/xfs/linux-2.6/xfs_aops.h
index 7b26f5ff969..1dd52884975 100644
--- a/fs/xfs/linux-2.6/xfs_aops.h
+++ b/fs/xfs/linux-2.6/xfs_aops.h
@@ -21,8 +21,6 @@
 extern struct workqueue_struct *xfsdatad_workqueue;
 extern mempool_t *xfs_ioend_pool;
 
-typedef void (*xfs_ioend_func_t)(void *);
-
 /*
  * xfs_ioend struct manages large extent writes for XFS.
  * It can manage several multi-page bio's at once.
diff --git a/fs/xfs/xfs_acl.h b/fs/xfs/xfs_acl.h
index a4e293b93ef..642f1db4def 100644
--- a/fs/xfs/xfs_acl.h
+++ b/fs/xfs/xfs_acl.h
@@ -22,7 +22,6 @@
  * Access Control Lists
  */
 typedef __uint16_t	xfs_acl_perm_t;
-typedef __int32_t	xfs_acl_type_t;
 typedef __int32_t	xfs_acl_tag_t;
 typedef __int32_t	xfs_acl_id_t;
 
diff --git a/fs/xfs/xfs_types.h b/fs/xfs/xfs_types.h
index 0f5191644ab..baedbd14dc2 100644
--- a/fs/xfs/xfs_types.h
+++ b/fs/xfs/xfs_types.h
@@ -111,8 +111,6 @@ typedef __uint64_t	xfs_fileoff_t;	/* block number in a file */
 typedef __int64_t	xfs_sfiloff_t;	/* signed block number in a file */
 typedef __uint64_t	xfs_filblks_t;	/* number of blocks in a file */
 
-typedef __uint8_t	xfs_arch_t;	/* architecture of an xfs fs */
-
 /*
  * Null values for the types.
  */
-- 
GitLab


From c9fb86a917640d66ba2e0613a12f3a76eda8a30f Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@sandeen.net>
Date: Thu, 1 Jan 2009 16:40:11 -0600
Subject: [PATCH 035/492] [XFS] Remove macro-to-function indirections in attr
 code

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/xfs_attr_leaf.c | 72 +++++++++++++++++++++---------------------
 fs/xfs/xfs_attr_leaf.h | 12 -------
 2 files changed, 36 insertions(+), 48 deletions(-)

diff --git a/fs/xfs/xfs_attr_leaf.c b/fs/xfs/xfs_attr_leaf.c
index 79da6b2ea99..6c323f8a4cd 100644
--- a/fs/xfs/xfs_attr_leaf.c
+++ b/fs/xfs/xfs_attr_leaf.c
@@ -736,7 +736,7 @@ xfs_attr_shortform_allfit(xfs_dabuf_t *bp, xfs_inode_t *dp)
 			continue;		/* don't copy partial entries */
 		if (!(entry->flags & XFS_ATTR_LOCAL))
 			return(0);
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
+		name_loc = xfs_attr_leaf_name_local(leaf, i);
 		if (name_loc->namelen >= XFS_ATTR_SF_ENTSIZE_MAX)
 			return(0);
 		if (be16_to_cpu(name_loc->valuelen) >= XFS_ATTR_SF_ENTSIZE_MAX)
@@ -823,7 +823,7 @@ xfs_attr_leaf_to_shortform(xfs_dabuf_t *bp, xfs_da_args_t *args, int forkoff)
 		if (!entry->nameidx)
 			continue;
 		ASSERT(entry->flags & XFS_ATTR_LOCAL);
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
+		name_loc = xfs_attr_leaf_name_local(leaf, i);
 		nargs.name = (char *)name_loc->nameval;
 		nargs.namelen = name_loc->namelen;
 		nargs.value = (char *)&name_loc->nameval[nargs.namelen];
@@ -1141,14 +1141,14 @@ xfs_attr_leaf_add_work(xfs_dabuf_t *bp, xfs_da_args_t *args, int mapindex)
 	 * as part of this transaction (a split operation for example).
 	 */
 	if (entry->flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, args->index);
+		name_loc = xfs_attr_leaf_name_local(leaf, args->index);
 		name_loc->namelen = args->namelen;
 		name_loc->valuelen = cpu_to_be16(args->valuelen);
 		memcpy((char *)name_loc->nameval, args->name, args->namelen);
 		memcpy((char *)&name_loc->nameval[args->namelen], args->value,
 				   be16_to_cpu(name_loc->valuelen));
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
 		name_rmt->namelen = args->namelen;
 		memcpy((char *)name_rmt->name, args->name, args->namelen);
 		entry->flags |= XFS_ATTR_INCOMPLETE;
@@ -1159,7 +1159,7 @@ xfs_attr_leaf_add_work(xfs_dabuf_t *bp, xfs_da_args_t *args, int mapindex)
 		args->rmtblkcnt = XFS_B_TO_FSB(mp, args->valuelen);
 	}
 	xfs_da_log_buf(args->trans, bp,
-	     XFS_DA_LOGRANGE(leaf, XFS_ATTR_LEAF_NAME(leaf, args->index),
+	     XFS_DA_LOGRANGE(leaf, xfs_attr_leaf_name(leaf, args->index),
 				   xfs_attr_leaf_entsize(leaf, args->index)));
 
 	/*
@@ -1749,10 +1749,10 @@ xfs_attr_leaf_remove(xfs_dabuf_t *bp, xfs_da_args_t *args)
 	/*
 	 * Compress the remaining entries and zero out the removed stuff.
 	 */
-	memset(XFS_ATTR_LEAF_NAME(leaf, args->index), 0, entsize);
+	memset(xfs_attr_leaf_name(leaf, args->index), 0, entsize);
 	be16_add_cpu(&hdr->usedbytes, -entsize);
 	xfs_da_log_buf(args->trans, bp,
-	     XFS_DA_LOGRANGE(leaf, XFS_ATTR_LEAF_NAME(leaf, args->index),
+	     XFS_DA_LOGRANGE(leaf, xfs_attr_leaf_name(leaf, args->index),
 				   entsize));
 
 	tmp = (be16_to_cpu(hdr->count) - args->index)
@@ -1985,7 +1985,7 @@ xfs_attr_leaf_lookup_int(xfs_dabuf_t *bp, xfs_da_args_t *args)
 			continue;
 		}
 		if (entry->flags & XFS_ATTR_LOCAL) {
-			name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, probe);
+			name_loc = xfs_attr_leaf_name_local(leaf, probe);
 			if (name_loc->namelen != args->namelen)
 				continue;
 			if (memcmp(args->name, (char *)name_loc->nameval, args->namelen) != 0)
@@ -1995,7 +1995,7 @@ xfs_attr_leaf_lookup_int(xfs_dabuf_t *bp, xfs_da_args_t *args)
 			args->index = probe;
 			return(XFS_ERROR(EEXIST));
 		} else {
-			name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, probe);
+			name_rmt = xfs_attr_leaf_name_remote(leaf, probe);
 			if (name_rmt->namelen != args->namelen)
 				continue;
 			if (memcmp(args->name, (char *)name_rmt->name,
@@ -2035,7 +2035,7 @@ xfs_attr_leaf_getvalue(xfs_dabuf_t *bp, xfs_da_args_t *args)
 
 	entry = &leaf->entries[args->index];
 	if (entry->flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, args->index);
+		name_loc = xfs_attr_leaf_name_local(leaf, args->index);
 		ASSERT(name_loc->namelen == args->namelen);
 		ASSERT(memcmp(args->name, name_loc->nameval, args->namelen) == 0);
 		valuelen = be16_to_cpu(name_loc->valuelen);
@@ -2050,7 +2050,7 @@ xfs_attr_leaf_getvalue(xfs_dabuf_t *bp, xfs_da_args_t *args)
 		args->valuelen = valuelen;
 		memcpy(args->value, &name_loc->nameval[args->namelen], valuelen);
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
 		ASSERT(name_rmt->namelen == args->namelen);
 		ASSERT(memcmp(args->name, name_rmt->name, args->namelen) == 0);
 		valuelen = be32_to_cpu(name_rmt->valuelen);
@@ -2143,7 +2143,7 @@ xfs_attr_leaf_moveents(xfs_attr_leafblock_t *leaf_s, int start_s,
 		 * off for 6.2, should be revisited later.
 		 */
 		if (entry_s->flags & XFS_ATTR_INCOMPLETE) { /* skip partials? */
-			memset(XFS_ATTR_LEAF_NAME(leaf_s, start_s + i), 0, tmp);
+			memset(xfs_attr_leaf_name(leaf_s, start_s + i), 0, tmp);
 			be16_add_cpu(&hdr_s->usedbytes, -tmp);
 			be16_add_cpu(&hdr_s->count, -1);
 			entry_d--;	/* to compensate for ++ in loop hdr */
@@ -2160,11 +2160,11 @@ xfs_attr_leaf_moveents(xfs_attr_leafblock_t *leaf_s, int start_s,
 			entry_d->flags = entry_s->flags;
 			ASSERT(be16_to_cpu(entry_d->nameidx) + tmp
 							<= XFS_LBSIZE(mp));
-			memmove(XFS_ATTR_LEAF_NAME(leaf_d, desti),
-				XFS_ATTR_LEAF_NAME(leaf_s, start_s + i), tmp);
+			memmove(xfs_attr_leaf_name(leaf_d, desti),
+				xfs_attr_leaf_name(leaf_s, start_s + i), tmp);
 			ASSERT(be16_to_cpu(entry_s->nameidx) + tmp
 							<= XFS_LBSIZE(mp));
-			memset(XFS_ATTR_LEAF_NAME(leaf_s, start_s + i), 0, tmp);
+			memset(xfs_attr_leaf_name(leaf_s, start_s + i), 0, tmp);
 			be16_add_cpu(&hdr_s->usedbytes, -tmp);
 			be16_add_cpu(&hdr_d->usedbytes, tmp);
 			be16_add_cpu(&hdr_s->count, -1);
@@ -2276,12 +2276,12 @@ xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index)
 
 	ASSERT(be16_to_cpu(leaf->hdr.info.magic) == XFS_ATTR_LEAF_MAGIC);
 	if (leaf->entries[index].flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, index);
-		size = XFS_ATTR_LEAF_ENTSIZE_LOCAL(name_loc->namelen,
+		name_loc = xfs_attr_leaf_name_local(leaf, index);
+		size = xfs_attr_leaf_entsize_local(name_loc->namelen,
 						   be16_to_cpu(name_loc->valuelen));
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, index);
-		size = XFS_ATTR_LEAF_ENTSIZE_REMOTE(name_rmt->namelen);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, index);
+		size = xfs_attr_leaf_entsize_remote(name_rmt->namelen);
 	}
 	return(size);
 }
@@ -2297,13 +2297,13 @@ xfs_attr_leaf_newentsize(int namelen, int valuelen, int blocksize, int *local)
 {
 	int size;
 
-	size = XFS_ATTR_LEAF_ENTSIZE_LOCAL(namelen, valuelen);
-	if (size < XFS_ATTR_LEAF_ENTSIZE_LOCAL_MAX(blocksize)) {
+	size = xfs_attr_leaf_entsize_local(namelen, valuelen);
+	if (size < xfs_attr_leaf_entsize_local_max(blocksize)) {
 		if (local) {
 			*local = 1;
 		}
 	} else {
-		size = XFS_ATTR_LEAF_ENTSIZE_REMOTE(namelen);
+		size = xfs_attr_leaf_entsize_remote(namelen);
 		if (local) {
 			*local = 0;
 		}
@@ -2372,7 +2372,7 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context)
 
 		if (entry->flags & XFS_ATTR_LOCAL) {
 			xfs_attr_leaf_name_local_t *name_loc =
-				XFS_ATTR_LEAF_NAME_LOCAL(leaf, i);
+				xfs_attr_leaf_name_local(leaf, i);
 
 			retval = context->put_listent(context,
 						entry->flags,
@@ -2384,7 +2384,7 @@ xfs_attr_leaf_list_int(xfs_dabuf_t *bp, xfs_attr_list_context_t *context)
 				return retval;
 		} else {
 			xfs_attr_leaf_name_remote_t *name_rmt =
-				XFS_ATTR_LEAF_NAME_REMOTE(leaf, i);
+				xfs_attr_leaf_name_remote(leaf, i);
 
 			int valuelen = be32_to_cpu(name_rmt->valuelen);
 
@@ -2468,11 +2468,11 @@ xfs_attr_leaf_clearflag(xfs_da_args_t *args)
 
 #ifdef DEBUG
 	if (entry->flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf, args->index);
+		name_loc = xfs_attr_leaf_name_local(leaf, args->index);
 		namelen = name_loc->namelen;
 		name = (char *)name_loc->nameval;
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
 		namelen = name_rmt->namelen;
 		name = (char *)name_rmt->name;
 	}
@@ -2487,7 +2487,7 @@ xfs_attr_leaf_clearflag(xfs_da_args_t *args)
 
 	if (args->rmtblkno) {
 		ASSERT((entry->flags & XFS_ATTR_LOCAL) == 0);
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
 		name_rmt->valueblk = cpu_to_be32(args->rmtblkno);
 		name_rmt->valuelen = cpu_to_be32(args->valuelen);
 		xfs_da_log_buf(args->trans, bp,
@@ -2534,7 +2534,7 @@ xfs_attr_leaf_setflag(xfs_da_args_t *args)
 	xfs_da_log_buf(args->trans, bp,
 			XFS_DA_LOGRANGE(leaf, entry, sizeof(*entry)));
 	if ((entry->flags & XFS_ATTR_LOCAL) == 0) {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf, args->index);
 		name_rmt->valueblk = 0;
 		name_rmt->valuelen = 0;
 		xfs_da_log_buf(args->trans, bp,
@@ -2607,20 +2607,20 @@ xfs_attr_leaf_flipflags(xfs_da_args_t *args)
 
 #ifdef DEBUG
 	if (entry1->flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf1, args->index);
+		name_loc = xfs_attr_leaf_name_local(leaf1, args->index);
 		namelen1 = name_loc->namelen;
 		name1 = (char *)name_loc->nameval;
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf1, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf1, args->index);
 		namelen1 = name_rmt->namelen;
 		name1 = (char *)name_rmt->name;
 	}
 	if (entry2->flags & XFS_ATTR_LOCAL) {
-		name_loc = XFS_ATTR_LEAF_NAME_LOCAL(leaf2, args->index2);
+		name_loc = xfs_attr_leaf_name_local(leaf2, args->index2);
 		namelen2 = name_loc->namelen;
 		name2 = (char *)name_loc->nameval;
 	} else {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf2, args->index2);
+		name_rmt = xfs_attr_leaf_name_remote(leaf2, args->index2);
 		namelen2 = name_rmt->namelen;
 		name2 = (char *)name_rmt->name;
 	}
@@ -2637,7 +2637,7 @@ xfs_attr_leaf_flipflags(xfs_da_args_t *args)
 			  XFS_DA_LOGRANGE(leaf1, entry1, sizeof(*entry1)));
 	if (args->rmtblkno) {
 		ASSERT((entry1->flags & XFS_ATTR_LOCAL) == 0);
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf1, args->index);
+		name_rmt = xfs_attr_leaf_name_remote(leaf1, args->index);
 		name_rmt->valueblk = cpu_to_be32(args->rmtblkno);
 		name_rmt->valuelen = cpu_to_be32(args->valuelen);
 		xfs_da_log_buf(args->trans, bp1,
@@ -2648,7 +2648,7 @@ xfs_attr_leaf_flipflags(xfs_da_args_t *args)
 	xfs_da_log_buf(args->trans, bp2,
 			  XFS_DA_LOGRANGE(leaf2, entry2, sizeof(*entry2)));
 	if ((entry2->flags & XFS_ATTR_LOCAL) == 0) {
-		name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf2, args->index2);
+		name_rmt = xfs_attr_leaf_name_remote(leaf2, args->index2);
 		name_rmt->valueblk = 0;
 		name_rmt->valuelen = 0;
 		xfs_da_log_buf(args->trans, bp2,
@@ -2855,7 +2855,7 @@ xfs_attr_leaf_inactive(xfs_trans_t **trans, xfs_inode_t *dp, xfs_dabuf_t *bp)
 	for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) {
 		if (be16_to_cpu(entry->nameidx) &&
 		    ((entry->flags & XFS_ATTR_LOCAL) == 0)) {
-			name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, i);
+			name_rmt = xfs_attr_leaf_name_remote(leaf, i);
 			if (name_rmt->valueblk)
 				count++;
 		}
@@ -2883,7 +2883,7 @@ xfs_attr_leaf_inactive(xfs_trans_t **trans, xfs_inode_t *dp, xfs_dabuf_t *bp)
 	for (i = 0; i < be16_to_cpu(leaf->hdr.count); entry++, i++) {
 		if (be16_to_cpu(entry->nameidx) &&
 		    ((entry->flags & XFS_ATTR_LOCAL) == 0)) {
-			name_rmt = XFS_ATTR_LEAF_NAME_REMOTE(leaf, i);
+			name_rmt = xfs_attr_leaf_name_remote(leaf, i);
 			if (name_rmt->valueblk) {
 				lp->valueblk = be32_to_cpu(name_rmt->valueblk);
 				lp->valuelen = XFS_B_TO_FSB(dp->i_mount,
diff --git a/fs/xfs/xfs_attr_leaf.h b/fs/xfs/xfs_attr_leaf.h
index 83e9af417ca..9c7d22fdcf4 100644
--- a/fs/xfs/xfs_attr_leaf.h
+++ b/fs/xfs/xfs_attr_leaf.h
@@ -151,8 +151,6 @@ typedef struct xfs_attr_leafblock {
 /*
  * Cast typed pointers for "local" and "remote" name/value structs.
  */
-#define XFS_ATTR_LEAF_NAME_REMOTE(leafp,idx)	\
-	xfs_attr_leaf_name_remote(leafp,idx)
 static inline xfs_attr_leaf_name_remote_t *
 xfs_attr_leaf_name_remote(xfs_attr_leafblock_t *leafp, int idx)
 {
@@ -160,8 +158,6 @@ xfs_attr_leaf_name_remote(xfs_attr_leafblock_t *leafp, int idx)
 		&((char *)leafp)[be16_to_cpu(leafp->entries[idx].nameidx)];
 }
 
-#define XFS_ATTR_LEAF_NAME_LOCAL(leafp,idx)	\
-	xfs_attr_leaf_name_local(leafp,idx)
 static inline xfs_attr_leaf_name_local_t *
 xfs_attr_leaf_name_local(xfs_attr_leafblock_t *leafp, int idx)
 {
@@ -169,8 +165,6 @@ xfs_attr_leaf_name_local(xfs_attr_leafblock_t *leafp, int idx)
 		&((char *)leafp)[be16_to_cpu(leafp->entries[idx].nameidx)];
 }
 
-#define XFS_ATTR_LEAF_NAME(leafp,idx)		\
-	xfs_attr_leaf_name(leafp,idx)
 static inline char *xfs_attr_leaf_name(xfs_attr_leafblock_t *leafp, int idx)
 {
 	return &((char *)leafp)[be16_to_cpu(leafp->entries[idx].nameidx)];
@@ -181,24 +175,18 @@ static inline char *xfs_attr_leaf_name(xfs_attr_leafblock_t *leafp, int idx)
  * a "local" name/value structure, a "remote" name/value structure, and
  * a pointer which might be either.
  */
-#define XFS_ATTR_LEAF_ENTSIZE_REMOTE(nlen)	\
-	xfs_attr_leaf_entsize_remote(nlen)
 static inline int xfs_attr_leaf_entsize_remote(int nlen)
 {
 	return ((uint)sizeof(xfs_attr_leaf_name_remote_t) - 1 + (nlen) + \
 		XFS_ATTR_LEAF_NAME_ALIGN - 1) & ~(XFS_ATTR_LEAF_NAME_ALIGN - 1);
 }
 
-#define XFS_ATTR_LEAF_ENTSIZE_LOCAL(nlen,vlen)	\
-	xfs_attr_leaf_entsize_local(nlen,vlen)
 static inline int xfs_attr_leaf_entsize_local(int nlen, int vlen)
 {
 	return ((uint)sizeof(xfs_attr_leaf_name_local_t) - 1 + (nlen) + (vlen) +
 		XFS_ATTR_LEAF_NAME_ALIGN - 1) & ~(XFS_ATTR_LEAF_NAME_ALIGN - 1);
 }
 
-#define XFS_ATTR_LEAF_ENTSIZE_LOCAL_MAX(bsize)	\
-	xfs_attr_leaf_entsize_local_max(bsize)
 static inline int xfs_attr_leaf_entsize_local_max(int bsize)
 {
 	return (((bsize) >> 1) + ((bsize) >> 2));
-- 
GitLab


From fb82557f16f3700ae4961a4ce599bdaff6a10b1c Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@sandeen.net>
Date: Fri, 9 Jan 2009 15:53:54 +1100
Subject: [PATCH 036/492] [XFS] Remove macro-to-function indirections in the
 mask code

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/xfs_ag.h         |  2 +-
 fs/xfs/xfs_bit.h        | 10 +----
 fs/xfs/xfs_bmap_btree.c | 84 ++++++++++++++++++++---------------------
 3 files changed, 44 insertions(+), 52 deletions(-)

diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h
index f2e21817a22..d3b3cf74299 100644
--- a/fs/xfs/xfs_ag.h
+++ b/fs/xfs/xfs_ag.h
@@ -231,7 +231,7 @@ typedef struct xfs_perag
 #define	XFS_FSB_TO_AGNO(mp,fsbno)	\
 	((xfs_agnumber_t)((fsbno) >> (mp)->m_sb.sb_agblklog))
 #define	XFS_FSB_TO_AGBNO(mp,fsbno)	\
-	((xfs_agblock_t)((fsbno) & XFS_MASK32LO((mp)->m_sb.sb_agblklog)))
+	((xfs_agblock_t)((fsbno) & xfs_mask32lo((mp)->m_sb.sb_agblklog)))
 #define	XFS_AGB_TO_DADDR(mp,agno,agbno)	\
 	((xfs_daddr_t)XFS_FSB_TO_BB(mp, \
 		(xfs_fsblock_t)(agno) * (mp)->m_sb.sb_agblocks + (agbno)))
diff --git a/fs/xfs/xfs_bit.h b/fs/xfs/xfs_bit.h
index bca7b243c31..f1e3c907044 100644
--- a/fs/xfs/xfs_bit.h
+++ b/fs/xfs/xfs_bit.h
@@ -23,24 +23,16 @@
  */
 
 /*
- * masks with n high/low bits set, 32-bit values & 64-bit values
+ * masks with n high/low bits set, 64-bit values
  */
-#define	XFS_MASK32HI(n)		xfs_mask32hi(n)
-static inline __uint32_t xfs_mask32hi(int n)
-{
-	return (__uint32_t)-1 << (32 - (n));
-}
-#define	XFS_MASK64HI(n)		xfs_mask64hi(n)
 static inline __uint64_t xfs_mask64hi(int n)
 {
 	return (__uint64_t)-1 << (64 - (n));
 }
-#define	XFS_MASK32LO(n)		xfs_mask32lo(n)
 static inline __uint32_t xfs_mask32lo(int n)
 {
 	return ((__uint32_t)1 << (n)) - 1;
 }
-#define	XFS_MASK64LO(n)		xfs_mask64lo(n)
 static inline __uint64_t xfs_mask64lo(int n)
 {
 	return ((__uint64_t)1 << (n)) - 1;
diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c
index 8f1ec73725d..ba6b08c2fb0 100644
--- a/fs/xfs/xfs_bmap_btree.c
+++ b/fs/xfs/xfs_bmap_btree.c
@@ -110,16 +110,16 @@ __xfs_bmbt_get_all(
 
 	ext_flag = (int)(l0 >> (64 - BMBT_EXNTFLAG_BITLEN));
 	s->br_startoff = ((xfs_fileoff_t)l0 &
-			   XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
+			   xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
 #if XFS_BIG_BLKNOS
-	s->br_startblock = (((xfs_fsblock_t)l0 & XFS_MASK64LO(9)) << 43) |
+	s->br_startblock = (((xfs_fsblock_t)l0 & xfs_mask64lo(9)) << 43) |
 			   (((xfs_fsblock_t)l1) >> 21);
 #else
 #ifdef DEBUG
 	{
 		xfs_dfsbno_t	b;
 
-		b = (((xfs_dfsbno_t)l0 & XFS_MASK64LO(9)) << 43) |
+		b = (((xfs_dfsbno_t)l0 & xfs_mask64lo(9)) << 43) |
 		    (((xfs_dfsbno_t)l1) >> 21);
 		ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
 		s->br_startblock = (xfs_fsblock_t)b;
@@ -128,7 +128,7 @@ __xfs_bmbt_get_all(
 	s->br_startblock = (xfs_fsblock_t)(((xfs_dfsbno_t)l1) >> 21);
 #endif	/* DEBUG */
 #endif	/* XFS_BIG_BLKNOS */
-	s->br_blockcount = (xfs_filblks_t)(l1 & XFS_MASK64LO(21));
+	s->br_blockcount = (xfs_filblks_t)(l1 & xfs_mask64lo(21));
 	/* This is xfs_extent_state() in-line */
 	if (ext_flag) {
 		ASSERT(s->br_blockcount != 0);	/* saved for DMIG */
@@ -153,7 +153,7 @@ xfs_filblks_t
 xfs_bmbt_get_blockcount(
 	xfs_bmbt_rec_host_t	*r)
 {
-	return (xfs_filblks_t)(r->l1 & XFS_MASK64LO(21));
+	return (xfs_filblks_t)(r->l1 & xfs_mask64lo(21));
 }
 
 /*
@@ -164,13 +164,13 @@ xfs_bmbt_get_startblock(
 	xfs_bmbt_rec_host_t	*r)
 {
 #if XFS_BIG_BLKNOS
-	return (((xfs_fsblock_t)r->l0 & XFS_MASK64LO(9)) << 43) |
+	return (((xfs_fsblock_t)r->l0 & xfs_mask64lo(9)) << 43) |
 	       (((xfs_fsblock_t)r->l1) >> 21);
 #else
 #ifdef DEBUG
 	xfs_dfsbno_t	b;
 
-	b = (((xfs_dfsbno_t)r->l0 & XFS_MASK64LO(9)) << 43) |
+	b = (((xfs_dfsbno_t)r->l0 & xfs_mask64lo(9)) << 43) |
 	    (((xfs_dfsbno_t)r->l1) >> 21);
 	ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b));
 	return (xfs_fsblock_t)b;
@@ -188,7 +188,7 @@ xfs_bmbt_get_startoff(
 	xfs_bmbt_rec_host_t	*r)
 {
 	return ((xfs_fileoff_t)r->l0 &
-		 XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
+		 xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
 }
 
 xfs_exntst_t
@@ -219,7 +219,7 @@ xfs_filblks_t
 xfs_bmbt_disk_get_blockcount(
 	xfs_bmbt_rec_t	*r)
 {
-	return (xfs_filblks_t)(be64_to_cpu(r->l1) & XFS_MASK64LO(21));
+	return (xfs_filblks_t)(be64_to_cpu(r->l1) & xfs_mask64lo(21));
 }
 
 /*
@@ -230,7 +230,7 @@ xfs_bmbt_disk_get_startoff(
 	xfs_bmbt_rec_t	*r)
 {
 	return ((xfs_fileoff_t)be64_to_cpu(r->l0) &
-		 XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
+		 xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN)) >> 9;
 }
 
 
@@ -248,33 +248,33 @@ xfs_bmbt_set_allf(
 	int		extent_flag = (state == XFS_EXT_NORM) ? 0 : 1;
 
 	ASSERT(state == XFS_EXT_NORM || state == XFS_EXT_UNWRITTEN);
-	ASSERT((startoff & XFS_MASK64HI(64-BMBT_STARTOFF_BITLEN)) == 0);
-	ASSERT((blockcount & XFS_MASK64HI(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
+	ASSERT((startoff & xfs_mask64hi(64-BMBT_STARTOFF_BITLEN)) == 0);
+	ASSERT((blockcount & xfs_mask64hi(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
 
 #if XFS_BIG_BLKNOS
-	ASSERT((startblock & XFS_MASK64HI(64-BMBT_STARTBLOCK_BITLEN)) == 0);
+	ASSERT((startblock & xfs_mask64hi(64-BMBT_STARTBLOCK_BITLEN)) == 0);
 
 	r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
 		((xfs_bmbt_rec_base_t)startoff << 9) |
 		((xfs_bmbt_rec_base_t)startblock >> 43);
 	r->l1 = ((xfs_bmbt_rec_base_t)startblock << 21) |
 		((xfs_bmbt_rec_base_t)blockcount &
-		(xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+		(xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 #else	/* !XFS_BIG_BLKNOS */
 	if (ISNULLSTARTBLOCK(startblock)) {
 		r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
 			((xfs_bmbt_rec_base_t)startoff << 9) |
-			 (xfs_bmbt_rec_base_t)XFS_MASK64LO(9);
-		r->l1 = XFS_MASK64HI(11) |
+			 (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
+		r->l1 = xfs_mask64hi(11) |
 			  ((xfs_bmbt_rec_base_t)startblock << 21) |
 			  ((xfs_bmbt_rec_base_t)blockcount &
-			   (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+			   (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 	} else {
 		r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) |
 			((xfs_bmbt_rec_base_t)startoff << 9);
 		r->l1 = ((xfs_bmbt_rec_base_t)startblock << 21) |
 			 ((xfs_bmbt_rec_base_t)blockcount &
-			 (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+			 (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 	}
 #endif	/* XFS_BIG_BLKNOS */
 }
@@ -306,11 +306,11 @@ xfs_bmbt_disk_set_allf(
 	int			extent_flag = (state == XFS_EXT_NORM) ? 0 : 1;
 
 	ASSERT(state == XFS_EXT_NORM || state == XFS_EXT_UNWRITTEN);
-	ASSERT((startoff & XFS_MASK64HI(64-BMBT_STARTOFF_BITLEN)) == 0);
-	ASSERT((blockcount & XFS_MASK64HI(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
+	ASSERT((startoff & xfs_mask64hi(64-BMBT_STARTOFF_BITLEN)) == 0);
+	ASSERT((blockcount & xfs_mask64hi(64-BMBT_BLOCKCOUNT_BITLEN)) == 0);
 
 #if XFS_BIG_BLKNOS
-	ASSERT((startblock & XFS_MASK64HI(64-BMBT_STARTBLOCK_BITLEN)) == 0);
+	ASSERT((startblock & xfs_mask64hi(64-BMBT_STARTBLOCK_BITLEN)) == 0);
 
 	r->l0 = cpu_to_be64(
 		((xfs_bmbt_rec_base_t)extent_flag << 63) |
@@ -319,17 +319,17 @@ xfs_bmbt_disk_set_allf(
 	r->l1 = cpu_to_be64(
 		((xfs_bmbt_rec_base_t)startblock << 21) |
 		 ((xfs_bmbt_rec_base_t)blockcount &
-		  (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)));
+		  (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
 #else	/* !XFS_BIG_BLKNOS */
 	if (ISNULLSTARTBLOCK(startblock)) {
 		r->l0 = cpu_to_be64(
 			((xfs_bmbt_rec_base_t)extent_flag << 63) |
 			 ((xfs_bmbt_rec_base_t)startoff << 9) |
-			  (xfs_bmbt_rec_base_t)XFS_MASK64LO(9));
-		r->l1 = cpu_to_be64(XFS_MASK64HI(11) |
+			  (xfs_bmbt_rec_base_t)xfs_mask64lo(9));
+		r->l1 = cpu_to_be64(xfs_mask64hi(11) |
 			  ((xfs_bmbt_rec_base_t)startblock << 21) |
 			  ((xfs_bmbt_rec_base_t)blockcount &
-			   (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)));
+			   (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
 	} else {
 		r->l0 = cpu_to_be64(
 			((xfs_bmbt_rec_base_t)extent_flag << 63) |
@@ -337,7 +337,7 @@ xfs_bmbt_disk_set_allf(
 		r->l1 = cpu_to_be64(
 			((xfs_bmbt_rec_base_t)startblock << 21) |
 			 ((xfs_bmbt_rec_base_t)blockcount &
-			  (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)));
+			  (xfs_bmbt_rec_base_t)xfs_mask64lo(21)));
 	}
 #endif	/* XFS_BIG_BLKNOS */
 }
@@ -362,9 +362,9 @@ xfs_bmbt_set_blockcount(
 	xfs_bmbt_rec_host_t *r,
 	xfs_filblks_t	v)
 {
-	ASSERT((v & XFS_MASK64HI(43)) == 0);
-	r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64HI(43)) |
-		  (xfs_bmbt_rec_base_t)(v & XFS_MASK64LO(21));
+	ASSERT((v & xfs_mask64hi(43)) == 0);
+	r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64hi(43)) |
+		  (xfs_bmbt_rec_base_t)(v & xfs_mask64lo(21));
 }
 
 /*
@@ -376,21 +376,21 @@ xfs_bmbt_set_startblock(
 	xfs_fsblock_t	v)
 {
 #if XFS_BIG_BLKNOS
-	ASSERT((v & XFS_MASK64HI(12)) == 0);
-	r->l0 = (r->l0 & (xfs_bmbt_rec_base_t)XFS_MASK64HI(55)) |
+	ASSERT((v & xfs_mask64hi(12)) == 0);
+	r->l0 = (r->l0 & (xfs_bmbt_rec_base_t)xfs_mask64hi(55)) |
 		  (xfs_bmbt_rec_base_t)(v >> 43);
-	r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(21)) |
+	r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)) |
 		  (xfs_bmbt_rec_base_t)(v << 21);
 #else	/* !XFS_BIG_BLKNOS */
 	if (ISNULLSTARTBLOCK(v)) {
-		r->l0 |= (xfs_bmbt_rec_base_t)XFS_MASK64LO(9);
-		r->l1 = (xfs_bmbt_rec_base_t)XFS_MASK64HI(11) |
+		r->l0 |= (xfs_bmbt_rec_base_t)xfs_mask64lo(9);
+		r->l1 = (xfs_bmbt_rec_base_t)xfs_mask64hi(11) |
 			  ((xfs_bmbt_rec_base_t)v << 21) |
-			  (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+			  (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 	} else {
-		r->l0 &= ~(xfs_bmbt_rec_base_t)XFS_MASK64LO(9);
+		r->l0 &= ~(xfs_bmbt_rec_base_t)xfs_mask64lo(9);
 		r->l1 = ((xfs_bmbt_rec_base_t)v << 21) |
-			  (r->l1 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(21));
+			  (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21));
 	}
 #endif	/* XFS_BIG_BLKNOS */
 }
@@ -403,10 +403,10 @@ xfs_bmbt_set_startoff(
 	xfs_bmbt_rec_host_t *r,
 	xfs_fileoff_t	v)
 {
-	ASSERT((v & XFS_MASK64HI(9)) == 0);
-	r->l0 = (r->l0 & (xfs_bmbt_rec_base_t) XFS_MASK64HI(1)) |
+	ASSERT((v & xfs_mask64hi(9)) == 0);
+	r->l0 = (r->l0 & (xfs_bmbt_rec_base_t) xfs_mask64hi(1)) |
 		((xfs_bmbt_rec_base_t)v << 9) |
-		  (r->l0 & (xfs_bmbt_rec_base_t)XFS_MASK64LO(9));
+		  (r->l0 & (xfs_bmbt_rec_base_t)xfs_mask64lo(9));
 }
 
 /*
@@ -419,9 +419,9 @@ xfs_bmbt_set_state(
 {
 	ASSERT(v == XFS_EXT_NORM || v == XFS_EXT_UNWRITTEN);
 	if (v == XFS_EXT_NORM)
-		r->l0 &= XFS_MASK64LO(64 - BMBT_EXNTFLAG_BITLEN);
+		r->l0 &= xfs_mask64lo(64 - BMBT_EXNTFLAG_BITLEN);
 	else
-		r->l0 |= XFS_MASK64HI(BMBT_EXNTFLAG_BITLEN);
+		r->l0 |= xfs_mask64hi(BMBT_EXNTFLAG_BITLEN);
 }
 
 /*
-- 
GitLab


From e6edbd1c1cbef278d58cdd8b046599ba8ac90cfc Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Thu, 8 Jan 2009 13:42:23 -0500
Subject: [PATCH 037/492] [XFS] fix compile of xfs_btree_readahead_lblock on
 m68k

Change the left/right variables to the proper always 64bit xfs_dfsbo_t
type because otherwise compilation fails for Geert on m68k without
CONFIG_LBD:

| fs/xfs/xfs_btree.c: In function 'xfs_btree_readahead_lblock':
| fs/xfs/xfs_btree.c:736: warning: comparison is always true due to limited range of data type
| fs/xfs/xfs_btree.c:741: warning: comparison is always true due to limited range of data type

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/xfs_btree.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c
index 7ed59267420..2c3ef20f884 100644
--- a/fs/xfs/xfs_btree.c
+++ b/fs/xfs/xfs_btree.c
@@ -730,8 +730,8 @@ xfs_btree_readahead_lblock(
 	struct xfs_btree_block	*block)
 {
 	int			rval = 0;
-	xfs_fsblock_t		left = be64_to_cpu(block->bb_u.l.bb_leftsib);
-	xfs_fsblock_t		right = be64_to_cpu(block->bb_u.l.bb_rightsib);
+	xfs_dfsbno_t		left = be64_to_cpu(block->bb_u.l.bb_leftsib);
+	xfs_dfsbno_t		right = be64_to_cpu(block->bb_u.l.bb_rightsib);
 
 	if ((lr & XFS_BTCUR_LEFTRA) && left != NULLDFSBNO) {
 		xfs_btree_reada_bufl(cur->bc_mp, left, 1);
-- 
GitLab


From 15440319767942a363f282d6585303d3d75088ba Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Thu, 8 Jan 2009 14:00:00 -0500
Subject: [PATCH 038/492] [XFS] truncate readdir offsets to signed 32 bit
 values

John Stanley reported EOVERFLOW errors in readdir from his self-build
glibc.  I traced this down to glibc enabling d_off overflow checks
in one of the about five million different getdents implementations.

In 2.6.28 Dave Woodhouse moved our readdir double buffering required
for NFS4 readdirplus into nfsd and at that point we lost the capping
of the directory offsets to 32 bit signed values.  Johns glibc used
getdents64 to even implement readdir for normal 32 bit offset dirents,
and failed with EOVERFLOW only if this happens on the first dirent in
a getdents call.  I managed to come up with a testcase that uses
raw getdents and does the EOVERFLOW check manually.  We always hit
it with our last entry due to the special end of directory marker.

The patch below is a dumb version of just putting back the masking,
to make sure we have the same behavior as in 2.6.27 and earlier.

I will work on a better and cleaner fix for 2.6.30.

Reported-by: John Stanley <jpsinthemix@verizon.net>
Tested-by: John Stanley <jpsinthemix@verizon.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/xfs_dir2_block.c |  7 ++++---
 fs/xfs/xfs_dir2_leaf.c  |  6 +++---
 fs/xfs/xfs_dir2_sf.c    | 15 ++++++++-------
 3 files changed, 15 insertions(+), 13 deletions(-)

diff --git a/fs/xfs/xfs_dir2_block.c b/fs/xfs/xfs_dir2_block.c
index e2fa0a1d8e9..e1f0a06aaf0 100644
--- a/fs/xfs/xfs_dir2_block.c
+++ b/fs/xfs/xfs_dir2_block.c
@@ -517,9 +517,9 @@ xfs_dir2_block_getdents(
 		/*
 		 * If it didn't fit, set the final offset to here & return.
 		 */
-		if (filldir(dirent, dep->name, dep->namelen, cook,
+		if (filldir(dirent, dep->name, dep->namelen, cook & 0x7fffffff,
 			    ino, DT_UNKNOWN)) {
-			*offset = cook;
+			*offset = cook & 0x7fffffff;
 			xfs_da_brelse(NULL, bp);
 			return 0;
 		}
@@ -529,7 +529,8 @@ xfs_dir2_block_getdents(
 	 * Reached the end of the block.
 	 * Set the offset to a non-existent block 1 and return.
 	 */
-	*offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0);
+	*offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0) &
+			0x7fffffff;
 	xfs_da_brelse(NULL, bp);
 	return 0;
 }
diff --git a/fs/xfs/xfs_dir2_leaf.c b/fs/xfs/xfs_dir2_leaf.c
index 93535992cb6..ef805a374ee 100644
--- a/fs/xfs/xfs_dir2_leaf.c
+++ b/fs/xfs/xfs_dir2_leaf.c
@@ -1092,7 +1092,7 @@ xfs_dir2_leaf_getdents(
 		 * Won't fit.  Return to caller.
 		 */
 		if (filldir(dirent, dep->name, dep->namelen,
-			    xfs_dir2_byte_to_dataptr(mp, curoff),
+			    xfs_dir2_byte_to_dataptr(mp, curoff) & 0x7fffffff,
 			    ino, DT_UNKNOWN))
 			break;
 
@@ -1108,9 +1108,9 @@ xfs_dir2_leaf_getdents(
 	 * All done.  Set output offset value to current offset.
 	 */
 	if (curoff > xfs_dir2_dataptr_to_byte(mp, XFS_DIR2_MAX_DATAPTR))
-		*offset = XFS_DIR2_MAX_DATAPTR;
+		*offset = XFS_DIR2_MAX_DATAPTR & 0x7fffffff;
 	else
-		*offset = xfs_dir2_byte_to_dataptr(mp, curoff);
+		*offset = xfs_dir2_byte_to_dataptr(mp, curoff) & 0x7fffffff;
 	kmem_free(map);
 	if (bp)
 		xfs_da_brelse(NULL, bp);
diff --git a/fs/xfs/xfs_dir2_sf.c b/fs/xfs/xfs_dir2_sf.c
index b46af0013ec..a8a8a6efad5 100644
--- a/fs/xfs/xfs_dir2_sf.c
+++ b/fs/xfs/xfs_dir2_sf.c
@@ -752,8 +752,8 @@ xfs_dir2_sf_getdents(
 #if XFS_BIG_INUMS
 		ino += mp->m_inoadd;
 #endif
-		if (filldir(dirent, ".", 1, dot_offset, ino, DT_DIR)) {
-			*offset = dot_offset;
+		if (filldir(dirent, ".", 1, dot_offset & 0x7fffffff, ino, DT_DIR)) {
+			*offset = dot_offset & 0x7fffffff;
 			return 0;
 		}
 	}
@@ -766,8 +766,8 @@ xfs_dir2_sf_getdents(
 #if XFS_BIG_INUMS
 		ino += mp->m_inoadd;
 #endif
-		if (filldir(dirent, "..", 2, dotdot_offset, ino, DT_DIR)) {
-			*offset = dotdot_offset;
+		if (filldir(dirent, "..", 2, dotdot_offset & 0x7fffffff, ino, DT_DIR)) {
+			*offset = dotdot_offset & 0x7fffffff;
 			return 0;
 		}
 	}
@@ -791,14 +791,15 @@ xfs_dir2_sf_getdents(
 #endif
 
 		if (filldir(dirent, sfep->name, sfep->namelen,
-					    off, ino, DT_UNKNOWN)) {
-			*offset = off;
+			    off & 0x7fffffff, ino, DT_UNKNOWN)) {
+			*offset = off & 0x7fffffff;
 			return 0;
 		}
 		sfep = xfs_dir2_sf_nextentry(sfp, sfep);
 	}
 
-	*offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0);
+	*offset = xfs_dir2_db_off_to_dataptr(mp, mp->m_dirdatablk + 1, 0) &
+			0x7fffffff;
 	return 0;
 }
 
-- 
GitLab


From 058652a37dd9eac18d6b8c1a311137c679de9dae Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@infradead.org>
Date: Thu, 8 Jan 2009 13:42:25 -0500
Subject: [PATCH 039/492] [XFS] make xfs_ino_t an unsigned long long

Currently xfs_ino_t is defined as a u64 which can either be an unsigned
long long or on some 64 bit platforms and unsigned long.  Just making
it and unsigned long long mean's it's still always 64 bits wide, but we
don't need to resort to cases to print it.

Fixes a warning regression on 64 bit powerpc in current git.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/xfs_types.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/xfs/xfs_types.h b/fs/xfs/xfs_types.h
index baedbd14dc2..b2f724502f1 100644
--- a/fs/xfs/xfs_types.h
+++ b/fs/xfs/xfs_types.h
@@ -45,7 +45,7 @@ typedef __uint32_t		prid_t;		/* project ID */
 typedef __uint32_t		inst_t;		/* an instruction */
 
 typedef __s64			xfs_off_t;	/* <file offset> type */
-typedef __u64			xfs_ino_t;	/* <inode> type */
+typedef unsigned long long	xfs_ino_t;	/* <inode> type */
 typedef __s64			xfs_daddr_t;	/* <disk address> type */
 typedef char *			xfs_caddr_t;	/* <core address> type */
 typedef __u32			xfs_dev_t;
-- 
GitLab


From 958f8c0e4fc311e23a40635a530c01aec366a6e8 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Tue, 6 Jan 2009 14:40:44 +1100
Subject: [PATCH 040/492] [XFS] remove old vmap cache

XFS's vmap batching simply defers a number (up to 64) of vunmaps, and keeps
track of them in a list. To purge the batch, it just goes through the list and
calls vunamp on each one. This is pretty poor: a global TLB flush is generally
still performed on each vunmap, with the most expensive parts of the operation
being the broadcast IPIs and locking involved in the SMP callouts, and the
locking involved in the vmap management -- none of these are avoided by just
batching up the calls. I'm actually surprised it ever made much difference.
(Now that the lazy vmap allocator is upstream, this description is not quite
right, but the vunmap batching still doesn't seem to do much)

Rip all this logic out of XFS completely. I will improve vmap performance
and scalability directly in subsequent patch.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/linux-2.6/xfs_buf.c | 75 +-------------------------------------
 1 file changed, 1 insertion(+), 74 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index cb329edc925..0b2177a9fbd 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -165,75 +165,6 @@ test_page_region(
 	return (mask && (page_private(page) & mask) == mask);
 }
 
-/*
- *	Mapping of multi-page buffers into contiguous virtual space
- */
-
-typedef struct a_list {
-	void		*vm_addr;
-	struct a_list	*next;
-} a_list_t;
-
-static a_list_t		*as_free_head;
-static int		as_list_len;
-static DEFINE_SPINLOCK(as_lock);
-
-/*
- *	Try to batch vunmaps because they are costly.
- */
-STATIC void
-free_address(
-	void		*addr)
-{
-	a_list_t	*aentry;
-
-#ifdef CONFIG_XEN
-	/*
-	 * Xen needs to be able to make sure it can get an exclusive
-	 * RO mapping of pages it wants to turn into a pagetable.  If
-	 * a newly allocated page is also still being vmap()ed by xfs,
-	 * it will cause pagetable construction to fail.  This is a
-	 * quick workaround to always eagerly unmap pages so that Xen
-	 * is happy.
-	 */
-	vunmap(addr);
-	return;
-#endif
-
-	aentry = kmalloc(sizeof(a_list_t), GFP_NOWAIT);
-	if (likely(aentry)) {
-		spin_lock(&as_lock);
-		aentry->next = as_free_head;
-		aentry->vm_addr = addr;
-		as_free_head = aentry;
-		as_list_len++;
-		spin_unlock(&as_lock);
-	} else {
-		vunmap(addr);
-	}
-}
-
-STATIC void
-purge_addresses(void)
-{
-	a_list_t	*aentry, *old;
-
-	if (as_free_head == NULL)
-		return;
-
-	spin_lock(&as_lock);
-	aentry = as_free_head;
-	as_free_head = NULL;
-	as_list_len = 0;
-	spin_unlock(&as_lock);
-
-	while ((old = aentry) != NULL) {
-		vunmap(aentry->vm_addr);
-		aentry = aentry->next;
-		kfree(old);
-	}
-}
-
 /*
  *	Internal xfs_buf_t object manipulation
  */
@@ -333,7 +264,7 @@ xfs_buf_free(
 		uint		i;
 
 		if ((bp->b_flags & XBF_MAPPED) && (bp->b_page_count > 1))
-			free_address(bp->b_addr - bp->b_offset);
+                       vunmap(bp->b_addr - bp->b_offset);
 
 		for (i = 0; i < bp->b_page_count; i++) {
 			struct page	*page = bp->b_pages[i];
@@ -455,8 +386,6 @@ _xfs_buf_map_pages(
 		bp->b_addr = page_address(bp->b_pages[0]) + bp->b_offset;
 		bp->b_flags |= XBF_MAPPED;
 	} else if (flags & XBF_MAPPED) {
-		if (as_list_len > 64)
-			purge_addresses();
 		bp->b_addr = vmap(bp->b_pages, bp->b_page_count,
 					VM_MAP, PAGE_KERNEL);
 		if (unlikely(bp->b_addr == NULL))
@@ -1743,8 +1672,6 @@ xfsbufd(
 			count++;
 		}
 
-		if (as_list_len > 0)
-			purge_addresses();
 		if (count)
 			blk_run_address_space(target->bt_mapping);
 
-- 
GitLab


From 0087167c9d5b1273e7e6bbe39a9ab13bdb9a39bb Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Tue, 6 Jan 2009 14:43:09 +1100
Subject: [PATCH 041/492] [XFS] use scalable vmap API

Implement XFS's large buffer support with the new vmap APIs. See the vmap
rewrite (db64fe02) for some numbers. The biggest improvement that comes from
using the new APIs is avoiding the global KVA allocation lock on every call.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 fs/xfs/linux-2.6/xfs_buf.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 0b2177a9fbd..d71dc44e21e 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -264,7 +264,7 @@ xfs_buf_free(
 		uint		i;
 
 		if ((bp->b_flags & XBF_MAPPED) && (bp->b_page_count > 1))
-                       vunmap(bp->b_addr - bp->b_offset);
+                       vm_unmap_ram(bp->b_addr - bp->b_offset, bp->b_page_count);
 
 		for (i = 0; i < bp->b_page_count; i++) {
 			struct page	*page = bp->b_pages[i];
@@ -386,8 +386,8 @@ _xfs_buf_map_pages(
 		bp->b_addr = page_address(bp->b_pages[0]) + bp->b_offset;
 		bp->b_flags |= XBF_MAPPED;
 	} else if (flags & XBF_MAPPED) {
-		bp->b_addr = vmap(bp->b_pages, bp->b_page_count,
-					VM_MAP, PAGE_KERNEL);
+               bp->b_addr = vm_map_ram(bp->b_pages, bp->b_page_count,
+                                       -1, PAGE_KERNEL);
 		if (unlikely(bp->b_addr == NULL))
 			return -ENOMEM;
 		bp->b_addr += bp->b_offset;
-- 
GitLab


From 0335cb76aa3fa913a2164bc9b669e5aef9d56fa3 Mon Sep 17 00:00:00 2001
From: Lachlan McIlroy <lachlan@redback.melbourne.sgi.com>
Date: Wed, 31 Dec 2008 12:10:12 +1100
Subject: [PATCH 042/492] [XFS] Update maintainers

New maintainer contact and new tree location.

Reviewed-by: Bill O`Donnell <billodo@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
---
 MAINTAINERS | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index a01884407fe..5f74bce1854 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4824,11 +4824,11 @@ S:	Supported
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-P:	Tim Shimmin
+P:	Bill O'Donnell
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
-T:	git git://oss.sgi.com:8090/xfs/xfs-2.6.git
+T:	git://oss.sgi.com/xfs/xfs.git
 S:	Supported
 
 XILINX SYSTEMACE DRIVER
-- 
GitLab


From 16b2857589b77c486f6261fbd0a28107bb9c9953 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Fri, 9 Jan 2009 07:51:10 +0100
Subject: [PATCH 043/492] ALSA: caiaq - Version 1.3.10

Increase the version number in module info to indicate the fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/caiaq/caiaq-device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c
index a62500e387a..41c36b055f6 100644
--- a/sound/usb/caiaq/caiaq-device.c
+++ b/sound/usb/caiaq/caiaq-device.c
@@ -42,7 +42,7 @@
 #endif
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.9");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.10");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
-- 
GitLab


From 5a9e02e94989323c2a7102e2fc80ee9102b19fa0 Mon Sep 17 00:00:00 2001
From: Wu Fengguang <wfg@linux.intel.com>
Date: Fri, 9 Jan 2009 16:45:24 +0800
Subject: [PATCH 044/492] ALSA: hda - create hda_codec.control_mutex for
 kcontrol->private_value

Fix the following lockdep warning by not reusing the hda_codec.spdif_mutex.

    ALSA sound/pci/hda/hda_codec.c:882: hda_codec_cleanup_stream: NID=0x2

    =======================================================
    [ INFO: possible circular locking dependency detected ]
    2.6.28-next-20090102 #33
    -------------------------------------------------------
    mplayer/3151 is trying to acquire lock:
     (&pcm->open_mutex){--..}, at: [<ffffffffa004ced3>] snd_pcm_release+0x43/0xd0 [snd_pcm]

    but task is already holding lock:
     (&mm->mmap_sem){----}, at: [<ffffffff810c0252>] sys_munmap+0x42/0x80

    which lock already depends on the new lock.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_codec.c     | 25 +++++++++++++------------
 sound/pci/hda/hda_codec.h     |  1 +
 sound/pci/hda/patch_realtek.c | 12 ++++++------
 3 files changed, 20 insertions(+), 18 deletions(-)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index e16cf63821a..f80e5f3b97d 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -735,6 +735,7 @@ int /*__devinit*/ snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr
 	codec->bus = bus;
 	codec->addr = codec_addr;
 	mutex_init(&codec->spdif_mutex);
+	mutex_init(&codec->control_mutex);
 	init_hda_cache(&codec->amp_cache, sizeof(struct hda_amp_info));
 	init_hda_cache(&codec->cmd_cache, sizeof(struct hda_cache_head));
 	snd_array_init(&codec->mixers, sizeof(struct snd_kcontrol *), 32);
@@ -1418,12 +1419,12 @@ int snd_hda_mixer_bind_switch_get(struct snd_kcontrol *kcontrol,
 	unsigned long pval;
 	int err;
 
-	mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_lock(&codec->control_mutex);
 	pval = kcontrol->private_value;
 	kcontrol->private_value = pval & ~AMP_VAL_IDX_MASK; /* index 0 */
 	err = snd_hda_mixer_amp_switch_get(kcontrol, ucontrol);
 	kcontrol->private_value = pval;
-	mutex_unlock(&codec->spdif_mutex);
+	mutex_unlock(&codec->control_mutex);
 	return err;
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_switch_get);
@@ -1435,7 +1436,7 @@ int snd_hda_mixer_bind_switch_put(struct snd_kcontrol *kcontrol,
 	unsigned long pval;
 	int i, indices, err = 0, change = 0;
 
-	mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_lock(&codec->control_mutex);
 	pval = kcontrol->private_value;
 	indices = (pval & AMP_VAL_IDX_MASK) >> AMP_VAL_IDX_SHIFT;
 	for (i = 0; i < indices; i++) {
@@ -1447,7 +1448,7 @@ int snd_hda_mixer_bind_switch_put(struct snd_kcontrol *kcontrol,
 		change |= err;
 	}
 	kcontrol->private_value = pval;
-	mutex_unlock(&codec->spdif_mutex);
+	mutex_unlock(&codec->control_mutex);
 	return err < 0 ? err : change;
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_switch_put);
@@ -1462,12 +1463,12 @@ int snd_hda_mixer_bind_ctls_info(struct snd_kcontrol *kcontrol,
 	struct hda_bind_ctls *c;
 	int err;
 
-	mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_lock(&codec->control_mutex);
 	c = (struct hda_bind_ctls *)kcontrol->private_value;
 	kcontrol->private_value = *c->values;
 	err = c->ops->info(kcontrol, uinfo);
 	kcontrol->private_value = (long)c;
-	mutex_unlock(&codec->spdif_mutex);
+	mutex_unlock(&codec->control_mutex);
 	return err;
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_ctls_info);
@@ -1479,12 +1480,12 @@ int snd_hda_mixer_bind_ctls_get(struct snd_kcontrol *kcontrol,
 	struct hda_bind_ctls *c;
 	int err;
 
-	mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_lock(&codec->control_mutex);
 	c = (struct hda_bind_ctls *)kcontrol->private_value;
 	kcontrol->private_value = *c->values;
 	err = c->ops->get(kcontrol, ucontrol);
 	kcontrol->private_value = (long)c;
-	mutex_unlock(&codec->spdif_mutex);
+	mutex_unlock(&codec->control_mutex);
 	return err;
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_ctls_get);
@@ -1497,7 +1498,7 @@ int snd_hda_mixer_bind_ctls_put(struct snd_kcontrol *kcontrol,
 	unsigned long *vals;
 	int err = 0, change = 0;
 
-	mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_lock(&codec->control_mutex);
 	c = (struct hda_bind_ctls *)kcontrol->private_value;
 	for (vals = c->values; *vals; vals++) {
 		kcontrol->private_value = *vals;
@@ -1507,7 +1508,7 @@ int snd_hda_mixer_bind_ctls_put(struct snd_kcontrol *kcontrol,
 		change |= err;
 	}
 	kcontrol->private_value = (long)c;
-	mutex_unlock(&codec->spdif_mutex);
+	mutex_unlock(&codec->control_mutex);
 	return err < 0 ? err : change;
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_ctls_put);
@@ -1519,12 +1520,12 @@ int snd_hda_mixer_bind_tlv(struct snd_kcontrol *kcontrol, int op_flag,
 	struct hda_bind_ctls *c;
 	int err;
 
-	mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_lock(&codec->control_mutex);
 	c = (struct hda_bind_ctls *)kcontrol->private_value;
 	kcontrol->private_value = *c->values;
 	err = c->ops->tlv(kcontrol, op_flag, size, tlv);
 	kcontrol->private_value = (long)c;
-	mutex_unlock(&codec->spdif_mutex);
+	mutex_unlock(&codec->control_mutex);
 	return err;
 }
 EXPORT_SYMBOL_HDA(snd_hda_mixer_bind_tlv);
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index 729fc7642d7..e9c723e13e5 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -771,6 +771,7 @@ struct hda_codec {
 	struct hda_cache_rec cmd_cache;	/* cache for other commands */
 
 	struct mutex spdif_mutex;
+	struct mutex control_mutex;
 	unsigned int spdif_status;	/* IEC958 status bits */
 	unsigned short spdif_ctls;	/* SPDIF control bits */
 	unsigned int spdif_in_enable;	/* SPDIF input enable? */
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index e8ec7417352..aa86a158450 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -1502,11 +1502,11 @@ static int alc_cap_vol_info(struct snd_kcontrol *kcontrol,
 	struct alc_spec *spec = codec->spec;
 	int err;
 
-	mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_lock(&codec->control_mutex);
 	kcontrol->private_value = HDA_COMPOSE_AMP_VAL(spec->adc_nids[0], 3, 0,
 						      HDA_INPUT);
 	err = snd_hda_mixer_amp_volume_info(kcontrol, uinfo);
-	mutex_unlock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_unlock(&codec->control_mutex);
 	return err;
 }
 
@@ -1517,11 +1517,11 @@ static int alc_cap_vol_tlv(struct snd_kcontrol *kcontrol, int op_flag,
 	struct alc_spec *spec = codec->spec;
 	int err;
 
-	mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_lock(&codec->control_mutex);
 	kcontrol->private_value = HDA_COMPOSE_AMP_VAL(spec->adc_nids[0], 3, 0,
 						      HDA_INPUT);
 	err = snd_hda_mixer_amp_tlv(kcontrol, op_flag, size, tlv);
-	mutex_unlock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_unlock(&codec->control_mutex);
 	return err;
 }
 
@@ -1537,11 +1537,11 @@ static int alc_cap_getput_caller(struct snd_kcontrol *kcontrol,
 	unsigned int adc_idx = snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
 	int err;
 
-	mutex_lock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_lock(&codec->control_mutex);
 	kcontrol->private_value = HDA_COMPOSE_AMP_VAL(spec->adc_nids[adc_idx],
 						      3, 0, HDA_INPUT);
 	err = func(kcontrol, ucontrol);
-	mutex_unlock(&codec->spdif_mutex); /* reuse spdif_mutex */
+	mutex_unlock(&codec->control_mutex);
 	return err;
 }
 
-- 
GitLab


From c6d1662b229410e64092fe3a9caed6535fb3dc65 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Thu, 8 Jan 2009 15:52:43 +0200
Subject: [PATCH 045/492] ASoC: TWL4030: Module unloading fix

Call the snd_soc_free_pcm and snd_soc_dapm_free when the
codec driver is unloaded.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/twl4030.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index db24f833c16..ea370a4f86d 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -1280,6 +1280,8 @@ static int twl4030_remove(struct platform_device *pdev)
 	struct snd_soc_codec *codec = socdev->codec;
 
 	printk(KERN_INFO "TWL4030 Audio Codec remove\n");
+	snd_soc_free_pcms(socdev);
+	snd_soc_dapm_free(socdev);
 	kfree(codec);
 
 	return 0;
-- 
GitLab


From 70cb92539cd1b8e1dec935a68fc154ea0db3a177 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Fri, 9 Jan 2009 13:14:07 -0800
Subject: [PATCH 046/492] mlx4_core: Fix warning from min()

Recent cpumask changes changed num_possible_cpus() from returning an int
to returning an unsigned int.  This means that doing

    min(num_possible_cpus(), <int expression>)

now produces a warning like

    drivers/net/mlx4/main.c: In function 'mlx4_enable_msi_x':
    drivers/net/mlx4/main.c:915: warning: comparison of distinct pointer types lacks a cast

Fix this by using min_t(int, ...).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/net/mlx4/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c
index 710c79e7a2d..6ef2490d5c3 100644
--- a/drivers/net/mlx4/main.c
+++ b/drivers/net/mlx4/main.c
@@ -912,8 +912,8 @@ static void mlx4_enable_msi_x(struct mlx4_dev *dev)
 	int i;
 
 	if (msi_x) {
-		nreq = min(dev->caps.num_eqs - dev->caps.reserved_eqs,
-			   num_possible_cpus() + 1);
+		nreq = min_t(int, dev->caps.num_eqs - dev->caps.reserved_eqs,
+			     num_possible_cpus() + 1);
 		entries = kcalloc(nreq, sizeof *entries, GFP_KERNEL);
 		if (!entries)
 			goto no_msi;
-- 
GitLab


From 22e7ef9c089305111661b01e425cd0b974231e2e Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Fri, 9 Jan 2009 13:22:29 -0800
Subject: [PATCH 047/492] IB/mlx4: Don't register IB device for adapters with
 no IB ports

If the mlx4_ib driver finds an adapter that has only ethernet ports, the
current code will register an IB device with 0 ports.  Nothing useful or
sensible can be done with such a device, so just skip registering it.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/mlx4/main.c | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c
index dcefe1fceb5..61588bd273b 100644
--- a/drivers/infiniband/hw/mlx4/main.c
+++ b/drivers/infiniband/hw/mlx4/main.c
@@ -543,14 +543,21 @@ static void *mlx4_ib_add(struct mlx4_dev *dev)
 {
 	static int mlx4_ib_version_printed;
 	struct mlx4_ib_dev *ibdev;
+	int num_ports = 0;
 	int i;
 
-
 	if (!mlx4_ib_version_printed) {
 		printk(KERN_INFO "%s", mlx4_ib_version);
 		++mlx4_ib_version_printed;
 	}
 
+	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
+		num_ports++;
+
+	/* No point in registering a device with no ports... */
+	if (num_ports == 0)
+		return NULL;
+
 	ibdev = (struct mlx4_ib_dev *) ib_alloc_device(sizeof *ibdev);
 	if (!ibdev) {
 		dev_err(&dev->pdev->dev, "Device struct alloc failed\n");
@@ -574,9 +581,7 @@ static void *mlx4_ib_add(struct mlx4_dev *dev)
 	ibdev->ib_dev.owner		= THIS_MODULE;
 	ibdev->ib_dev.node_type		= RDMA_NODE_IB_CA;
 	ibdev->ib_dev.local_dma_lkey	= dev->caps.reserved_lkey;
-	ibdev->num_ports = 0;
-	mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
-		ibdev->num_ports++;
+	ibdev->num_ports		= num_ports;
 	ibdev->ib_dev.phys_port_cnt     = ibdev->num_ports;
 	ibdev->ib_dev.num_comp_vectors	= dev->caps.num_comp_vectors;
 	ibdev->ib_dev.dma_device	= &dev->pdev->dev;
-- 
GitLab


From a50df398cddf6b757bdbf30f5f0875982ef5c660 Mon Sep 17 00:00:00 2001
From: Yossi Etigin <yosefe@Voltaire.COM>
Date: Fri, 9 Jan 2009 14:05:11 -0800
Subject: [PATCH 048/492] IPoIB: Fix loss of connectivity after bonding
 failover on both sides

Fix bonding failover in the case both peers failover and the
gratuitous ARP is lost.  In that case, the sender side will create an
ipoib_neigh and issue a path request with the old GID first.  When
skb->dst->neighbour->ha changes due to ARP refresh, this ipoib_neigh
will not be added to the path->list of the path of the new GID,
because the ipoib_neigh already exists.  It will not have an AH
either, because of sender-side failover.  Therefore, it will not get
an AH when the path is resolved.

The solution here is to compare GIDs in ipoib_start_xmit() even if
neigh->ah is invalid.  Comparing with an uninitialized value of
neigh->dgid should be fine, since a spurious match is harmless (and
astronomically unlikely too).

Signed-off-by: Moni Shoua <monis@voltaire.com>
Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c | 38 +++++++++++------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index 19e06bc38b3..dce0443f9d6 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -711,26 +711,26 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 		neigh = *to_ipoib_neigh(skb->dst->neighbour);
 
-		if (neigh->ah)
-			if (unlikely((memcmp(&neigh->dgid.raw,
-					    skb->dst->neighbour->ha + 4,
-					    sizeof(union ib_gid))) ||
-					 (neigh->dev != dev))) {
-				spin_lock_irqsave(&priv->lock, flags);
-				/*
-				 * It's safe to call ipoib_put_ah() inside
-				 * priv->lock here, because we know that
-				 * path->ah will always hold one more reference,
-				 * so ipoib_put_ah() will never do more than
-				 * decrement the ref count.
-				 */
+		if (unlikely((memcmp(&neigh->dgid.raw,
+				     skb->dst->neighbour->ha + 4,
+				     sizeof(union ib_gid))) ||
+			     (neigh->dev != dev))) {
+			spin_lock_irqsave(&priv->lock, flags);
+			/*
+			 * It's safe to call ipoib_put_ah() inside
+			 * priv->lock here, because we know that
+			 * path->ah will always hold one more reference,
+			 * so ipoib_put_ah() will never do more than
+			 * decrement the ref count.
+			 */
+			if (neigh->ah)
 				ipoib_put_ah(neigh->ah);
-				list_del(&neigh->list);
-				ipoib_neigh_free(dev, neigh);
-				spin_unlock_irqrestore(&priv->lock, flags);
-				ipoib_path_lookup(skb, dev);
-				return NETDEV_TX_OK;
-			}
+			list_del(&neigh->list);
+			ipoib_neigh_free(dev, neigh);
+			spin_unlock_irqrestore(&priv->lock, flags);
+			ipoib_path_lookup(skb, dev);
+			return NETDEV_TX_OK;
+		}
 
 		if (ipoib_cm_get(neigh)) {
 			if (ipoib_cm_up(neigh)) {
-- 
GitLab


From 23faf63123e306b4a134f6d6c501813f6c8599dc Mon Sep 17 00:00:00 2001
From: roel kluin <roel.kluin@gmail.com>
Date: Fri, 9 Jan 2009 15:49:04 -0700
Subject: [PATCH 049/492] powerpc/mpc5121: fix NULL test in mpc5121_clk_get
 utility function.

strcmp on NULL results in a segmentation fault, also, remove the second,
redundant test on dev

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/512x/clock.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
index f416014ee72..1bcff94eb92 100644
--- a/arch/powerpc/platforms/512x/clock.c
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -56,12 +56,12 @@ static struct clk *mpc5121_clk_get(struct device *dev, const char *id)
 	int dev_match = 0;
 	int id_match = 0;
 
-	if (dev == NULL && id == NULL)
+	if (dev == NULL || id == NULL)
 		return NULL;
 
 	mutex_lock(&clocks_mutex);
 	list_for_each_entry(p, &clocks, node) {
-		if (dev && dev == p->dev)
+		if (dev == p->dev)
 			dev_match++;
 		if (strcmp(id, p->name) == 0)
 			id_match++;
-- 
GitLab


From d30239a0ef2000cfae6c60f8e870da2d8dba4d22 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Fri, 9 Jan 2009 15:49:05 -0700
Subject: [PATCH 050/492] powerpc/mpc52xx: Properly update irq_desc when
 set_type() is called.

The MPC5200 PIC driver doesn't correctly update the .status field of
the irq_desc structure when the set_type hook is called.  This patch
adds the required code.

Also cleans up the external IRQ typename field to be something easier
to read (very minor).

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/52xx/mpc52xx_pic.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
index 72865e8e4b5..0a093f03c75 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c
@@ -196,6 +196,7 @@ static void mpc52xx_extirq_ack(unsigned int virq)
 
 static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
 {
+	struct irq_desc *desc = get_irq_desc(virq);
 	u32 ctrl_reg, type;
 	int irq;
 	int l2irq;
@@ -222,6 +223,11 @@ static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
 		type = 0;
 	}
 
+	desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+	desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+	if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+		desc->status |= IRQ_LEVEL;
+
 	ctrl_reg = in_be32(&intr->ctrl);
 	ctrl_reg &= ~(0x3 << (22 - (l2irq * 2)));
 	ctrl_reg |= (type << (22 - (l2irq * 2)));
@@ -231,7 +237,7 @@ static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type)
 }
 
 static struct irq_chip mpc52xx_extirq_irqchip = {
-	.typename = " MPC52xx IRQ[0-3] ",
+	.typename = "MPC52xx External",
 	.mask = mpc52xx_extirq_mask,
 	.unmask = mpc52xx_extirq_unmask,
 	.ack = mpc52xx_extirq_ack,
-- 
GitLab


From ddd527d56a0e635abdc7ffeb688cdde7593ad2d3 Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Fri, 9 Jan 2009 15:49:05 -0700
Subject: [PATCH 051/492] powerpc/mpc52xx: remove dead code from GPIO driver

Eliminate duplicate return statements

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 arch/powerpc/platforms/52xx/mpc52xx_gpio.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index 8a455ebce98..07f89ae46d0 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -363,11 +363,8 @@ static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
-	unsigned int ret;
 
 	return (in_be32(&regs->status) & (1 << (31 - 23))) ? 1 : 0;
-
-	return ret;
 }
 
 static void
-- 
GitLab


From f5020384e4fa8ab9397aa6fa176e61e9bf7947f7 Mon Sep 17 00:00:00 2001
From: Yuri Tikhonov <yur@emcraft.com>
Date: Fri, 9 Jan 2009 15:49:06 -0700
Subject: [PATCH 052/492] powerpc/xsysace: add compatible string for non-ipcore
 instance

Add "xlnx,sysace" compatible string to the of_platform binding
table.  Platforms which have the SysACE chip on board (e.g.
Katmai) instead of via a Xilinx generated IP core will use
this value in their device tree.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/block/xsysace.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 29e1dfafb7c..381d686fc1a 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -1206,6 +1206,7 @@ static struct of_device_id ace_of_match[] __devinitdata = {
 	{ .compatible = "xlnx,opb-sysace-1.00.b", },
 	{ .compatible = "xlnx,opb-sysace-1.00.c", },
 	{ .compatible = "xlnx,xps-sysace-1.00.a", },
+	{ .compatible = "xlnx,sysace", },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ace_of_match);
-- 
GitLab


From 2526c151c31358aec66b63921dd712bbec5ee0cb Mon Sep 17 00:00:00 2001
From: Jon Smirl <jonsmirl@gmail.com>
Date: Fri, 9 Jan 2009 15:49:06 -0700
Subject: [PATCH 053/492] drivers/of: Add the of_find_i2c_device_by_node
 function.

The of_find_i2c_device_by_node function allows you to follow a
reference in the device tree to an i2c device node and then locate
the linux device instantiated by the device tree. Example use: an I2S
bus driver finding the i2c_device instance for a codec described by
a device tree node.

This was waiting for Anton's i2c patches that were just added.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 drivers/of/of_i2c.c    | 19 +++++++++++++++++++
 include/linux/of_i2c.h |  3 +++
 2 files changed, 22 insertions(+)

diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index e1b0ad6e918..fa65a2b2ae2 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -66,4 +66,23 @@ void of_register_i2c_devices(struct i2c_adapter *adap,
 }
 EXPORT_SYMBOL(of_register_i2c_devices);
 
+static int of_dev_node_match(struct device *dev, void *data)
+{
+        return dev_archdata_get_node(&dev->archdata) == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node,
+					 of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	return to_i2c_client(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
 MODULE_LICENSE("GPL");
diff --git a/include/linux/of_i2c.h b/include/linux/of_i2c.h
index bd2a870ec29..34974b5a76f 100644
--- a/include/linux/of_i2c.h
+++ b/include/linux/of_i2c.h
@@ -17,4 +17,7 @@
 void of_register_i2c_devices(struct i2c_adapter *adap,
 			     struct device_node *adap_node);
 
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node);
+
 #endif /* __LINUX_OF_I2C_H */
-- 
GitLab


From ff82c587a9a4cb8796e7e04377155deba15ae18b Mon Sep 17 00:00:00 2001
From: John Linn <john.linn@xilinx.com>
Date: Fri, 9 Jan 2009 16:01:53 -0700
Subject: [PATCH 054/492] Xilinx: SPI: updated driver for device tree

The driver was updated to use the device tree rather than the platform data.

Signed-off-by: John Linn <john.linn@xilinx.com>
---
 drivers/spi/xilinx_spi.c | 137 +++++++++++++++++++++++----------------
 1 file changed, 81 insertions(+), 56 deletions(-)

diff --git a/drivers/spi/xilinx_spi.c b/drivers/spi/xilinx_spi.c
index 68d6f4988fb..fe7e5f35e5d 100644
--- a/drivers/spi/xilinx_spi.c
+++ b/drivers/spi/xilinx_spi.c
@@ -15,12 +15,15 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/of_spi.h>
+
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 #include <linux/io.h>
 
-#include <syslib/virtex_devices.h>
-
 #define XILINX_SPI_NAME "xilinx_spi"
 
 /* Register definitions as per "OPB Serial Peripheral Interface (SPI) (v1.00e)
@@ -144,23 +147,14 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
 		struct spi_transfer *t)
 {
 	u8 bits_per_word;
-	u32 hz;
-	struct xilinx_spi *xspi = spi_master_get_devdata(spi->master);
 
 	bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-	hz = (t) ? t->speed_hz : spi->max_speed_hz;
 	if (bits_per_word != 8) {
 		dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
 			__func__, bits_per_word);
 		return -EINVAL;
 	}
 
-	if (hz && xspi->speed_hz > hz) {
-		dev_err(&spi->dev, "%s, unsupported clock rate %uHz\n",
-			__func__, hz);
-		return -EINVAL;
-	}
-
 	return 0;
 }
 
@@ -304,32 +298,38 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int __init xilinx_spi_probe(struct platform_device *dev)
+static int __init xilinx_spi_of_probe(struct of_device *ofdev,
+					const struct of_device_id *match)
 {
-	int ret = 0;
 	struct spi_master *master;
 	struct xilinx_spi *xspi;
-	struct xspi_platform_data *pdata;
-	struct resource *r;
+	struct resource r_irq_struct;
+	struct resource r_mem_struct;
+
+	struct resource *r_irq = &r_irq_struct;
+	struct resource *r_mem = &r_mem_struct;
+	int rc = 0;
+	const u32 *prop;
+	int len;
 
 	/* Get resources(memory, IRQ) associated with the device */
-	master = spi_alloc_master(&dev->dev, sizeof(struct xilinx_spi));
+	master = spi_alloc_master(&ofdev->dev, sizeof(struct xilinx_spi));
 
 	if (master == NULL) {
 		return -ENOMEM;
 	}
 
-	platform_set_drvdata(dev, master);
-	pdata = dev->dev.platform_data;
+	dev_set_drvdata(&ofdev->dev, master);
 
-	if (pdata == NULL) {
-		ret = -ENODEV;
+	rc = of_address_to_resource(ofdev->node, 0, r_mem);
+	if (rc) {
+		dev_warn(&ofdev->dev, "invalid address\n");
 		goto put_master;
 	}
 
-	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	if (r == NULL) {
-		ret = -ENODEV;
+	rc = of_irq_to_resource(ofdev->node, 0, r_irq);
+	if (rc == NO_IRQ) {
+		dev_warn(&ofdev->dev, "no IRQ found\n");
 		goto put_master;
 	}
 
@@ -341,47 +341,57 @@ static int __init xilinx_spi_probe(struct platform_device *dev)
 	xspi->bitbang.master->setup = xilinx_spi_setup;
 	init_completion(&xspi->done);
 
-	if (!request_mem_region(r->start,
-			r->end - r->start + 1, XILINX_SPI_NAME)) {
-		ret = -ENXIO;
+	xspi->irq = r_irq->start;
+
+	if (!request_mem_region(r_mem->start,
+			r_mem->end - r_mem->start + 1, XILINX_SPI_NAME)) {
+		rc = -ENXIO;
+		dev_warn(&ofdev->dev, "memory request failure\n");
 		goto put_master;
 	}
 
-	xspi->regs = ioremap(r->start, r->end - r->start + 1);
+	xspi->regs = ioremap(r_mem->start, r_mem->end - r_mem->start + 1);
 	if (xspi->regs == NULL) {
-		ret = -ENOMEM;
+		rc = -ENOMEM;
+		dev_warn(&ofdev->dev, "ioremap failure\n");
 		goto put_master;
 	}
+	xspi->irq = r_irq->start;
 
-	ret = platform_get_irq(dev, 0);
-	if (ret < 0) {
-		ret = -ENXIO;
-		goto unmap_io;
-	}
-	xspi->irq = ret;
+	/* dynamic bus assignment */
+	master->bus_num = -1;
 
-	master->bus_num = pdata->bus_num;
-	master->num_chipselect = pdata->num_chipselect;
-	xspi->speed_hz = pdata->speed_hz;
+	/* number of slave select bits is required */
+	prop = of_get_property(ofdev->node, "xlnx,num-ss-bits", &len);
+	if (!prop || len < sizeof(*prop)) {
+		dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
+		goto put_master;
+	}
+	master->num_chipselect = *prop;
 
 	/* SPI controller initializations */
 	xspi_init_hw(xspi->regs);
 
 	/* Register for SPI Interrupt */
-	ret = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
-	if (ret != 0)
+	rc = request_irq(xspi->irq, xilinx_spi_irq, 0, XILINX_SPI_NAME, xspi);
+	if (rc != 0) {
+		dev_warn(&ofdev->dev, "irq request failure: %d\n", xspi->irq);
 		goto unmap_io;
+	}
 
-	ret = spi_bitbang_start(&xspi->bitbang);
-	if (ret != 0) {
-		dev_err(&dev->dev, "spi_bitbang_start FAILED\n");
+	rc = spi_bitbang_start(&xspi->bitbang);
+	if (rc != 0) {
+		dev_err(&ofdev->dev, "spi_bitbang_start FAILED\n");
 		goto free_irq;
 	}
 
-	dev_info(&dev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
-			r->start, (u32)xspi->regs, xspi->irq);
+	dev_info(&ofdev->dev, "at 0x%08X mapped to 0x%08X, irq=%d\n",
+			(unsigned int)r_mem->start, (u32)xspi->regs, xspi->irq);
 
-	return ret;
+	/* Add any subnodes on the SPI bus */
+	of_register_spi_devices(master, ofdev->node);
+
+	return rc;
 
 free_irq:
 	free_irq(xspi->irq, xspi);
@@ -389,21 +399,21 @@ unmap_io:
 	iounmap(xspi->regs);
 put_master:
 	spi_master_put(master);
-	return ret;
+	return rc;
 }
 
-static int __devexit xilinx_spi_remove(struct platform_device *dev)
+static int __devexit xilinx_spi_remove(struct of_device *ofdev)
 {
 	struct xilinx_spi *xspi;
 	struct spi_master *master;
 
-	master = platform_get_drvdata(dev);
+	master = platform_get_drvdata(ofdev);
 	xspi = spi_master_get_devdata(master);
 
 	spi_bitbang_stop(&xspi->bitbang);
 	free_irq(xspi->irq, xspi);
 	iounmap(xspi->regs);
-	platform_set_drvdata(dev, 0);
+	dev_set_drvdata(&ofdev->dev, 0);
 	spi_master_put(xspi->bitbang.master);
 
 	return 0;
@@ -412,27 +422,42 @@ static int __devexit xilinx_spi_remove(struct platform_device *dev)
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:" XILINX_SPI_NAME);
 
-static struct platform_driver xilinx_spi_driver = {
-	.probe	= xilinx_spi_probe,
-	.remove	= __devexit_p(xilinx_spi_remove),
+static int __exit xilinx_spi_of_remove(struct of_device *op)
+{
+	return xilinx_spi_remove(op);
+}
+
+static struct of_device_id xilinx_spi_of_match[] = {
+	{ .compatible = "xlnx,xps-spi-2.00.a", },
+	{ .compatible = "xlnx,xps-spi-2.00.b", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
+
+static struct of_platform_driver xilinx_spi_of_driver = {
+	.owner = THIS_MODULE,
+	.name = "xilinx-xps-spi",
+	.match_table = xilinx_spi_of_match,
+	.probe = xilinx_spi_of_probe,
+	.remove = __exit_p(xilinx_spi_of_remove),
 	.driver = {
-		.name = XILINX_SPI_NAME,
+		.name = "xilinx-xps-spi",
 		.owner = THIS_MODULE,
 	},
 };
 
 static int __init xilinx_spi_init(void)
 {
-	return platform_driver_register(&xilinx_spi_driver);
+	return of_register_platform_driver(&xilinx_spi_of_driver);
 }
 module_init(xilinx_spi_init);
 
 static void __exit xilinx_spi_exit(void)
 {
-	platform_driver_unregister(&xilinx_spi_driver);
+	of_unregister_platform_driver(&xilinx_spi_of_driver);
 }
 module_exit(xilinx_spi_exit);
-
 MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
 MODULE_DESCRIPTION("Xilinx SPI driver");
 MODULE_LICENSE("GPL");
-- 
GitLab


From 886ad09fc83342aa1c5a02a0b6d3298b78a8067f Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Fri, 9 Jan 2009 15:54:07 -0800
Subject: [PATCH 055/492] libata: Add a per-host flag to opt-in into parallel
 port probes

This patch adds a per host flag that allows drivers to opt in into
having its busses scanned in parallel.

Drivers that do not set this flag get their ports scanned in
the "original" sequence.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/ata/ahci.c        | 3 +++
 drivers/ata/libata-core.c | 9 +++++++++
 include/linux/libata.h    | 1 +
 3 files changed, 13 insertions(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 7f701cbe14a..96039671e3b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2660,6 +2660,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	host->iomap = pcim_iomap_table(pdev);
 	host->private_data = hpriv;
 
+	if (!(hpriv->cap & HOST_CAP_SSS))
+		host->flags |= ATA_HOST_PARALLEL_SCAN;
+
 	if (pi.flags & ATA_FLAG_EM)
 		ahci_reset_em(host);
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c507a9ac78f..f810078fafc 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5920,6 +5920,15 @@ static void async_port_probe(void *data, async_cookie_t cookie)
 {
 	int rc;
 	struct ata_port *ap = data;
+
+	/*
+	 * If we're not allowed to scan this host in parallel,
+	 * we need to wait until all previous scans have completed
+	 * before going further.
+	 */
+	if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN))
+		async_synchronize_cookie(cookie);
+
 	/* probe */
 	if (ap->ops->error_handler) {
 		struct ata_eh_info *ehi = &ap->link.eh_info;
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 4f7c8fb4d3f..b6b8a7f3ec6 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -239,6 +239,7 @@ enum {
 	/* host set flags */
 	ATA_HOST_SIMPLEX	= (1 << 0),	/* Host is simplex, one DMA channel per host only */
 	ATA_HOST_STARTED	= (1 << 1),	/* Host started */
+	ATA_HOST_PARALLEL_SCAN	= (1 << 2),	/* Ports on this host can be scanned in parallel */
 
 	/* bits 24:31 of host->flags are reserved for LLD specific flags */
 
-- 
GitLab


From fa853a48413c2ca1a5dc6b539bf07cf8e7247f8e Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Sat, 10 Jan 2009 10:18:44 -0800
Subject: [PATCH 056/492] libata: only ports >= 0 need to synchronize

In a discussio with Jeff Garzik, he mentioned that the serialization
for the libata port probes only needs to be within the domain of a host.
This means that for the first port of each host (with ID 0), we don't
need to wait, so we can relax our serialization a little.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/ata/libata-core.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f810078fafc..71218d76d75 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5925,8 +5925,10 @@ static void async_port_probe(void *data, async_cookie_t cookie)
 	 * If we're not allowed to scan this host in parallel,
 	 * we need to wait until all previous scans have completed
 	 * before going further.
+	 * Jeff Garzik says this is only within a controller, so we
+	 * don't need to wait for port 0, only for later ports.
 	 */
-	if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN))
+	if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0)
 		async_synchronize_cookie(cookie);
 
 	/* probe */
-- 
GitLab


From d3f8ddea444b3b5324d74144177a50557cd1f137 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Sat, 10 Jan 2009 10:03:05 -0800
Subject: [PATCH 057/492] bootgraph: make the bootgraph script show async
 waiting time

It is useful for diagnosing boot performance to see where async function
calls are waiting on serialization...  this patch adds this
functionality to the bootgraph.pl script.

The waiting time is shown as a half transparent, gray bar through the
block that is waiting.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/bootgraph.pl | 46 ++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 42 insertions(+), 4 deletions(-)

diff --git a/scripts/bootgraph.pl b/scripts/bootgraph.pl
index 0a498e33b30..b0246307aac 100644
--- a/scripts/bootgraph.pl
+++ b/scripts/bootgraph.pl
@@ -41,11 +41,13 @@ use strict;
 
 my %start;
 my %end;
+my %type;
 my $done = 0;
 my $maxtime = 0;
 my $firsttime = 100;
 my $count = 0;
 my %pids;
+my %pidctr;
 
 while (<>) {
 	my $line = $_;
@@ -53,6 +55,7 @@ while (<>) {
 		my $func = $2;
 		if ($done == 0) {
 			$start{$func} = $1;
+			$type{$func} = 0;
 			if ($1 < $firsttime) {
 				$firsttime = $1;
 			}
@@ -63,12 +66,40 @@ while (<>) {
 		$count = $count + 1;
 	}
 
+	if ($line =~ /([0-9\.]+)\] async_waiting @ ([0-9]+)/) {
+		my $pid = $2;
+		my $func;
+		if (!defined($pidctr{$pid})) {
+			$func = "wait_" . $pid . "_1";
+			$pidctr{$pid} = 1;
+		} else {
+			$pidctr{$pid} = $pidctr{$pid} + 1;
+			$func = "wait_" . $pid . "_" . $pidctr{$pid};
+		}
+		if ($done == 0) {
+			$start{$func} = $1;
+			$type{$func} = 1;
+			if ($1 < $firsttime) {
+				$firsttime = $1;
+			}
+		}
+		$pids{$func} = $pid;
+		$count = $count + 1;
+	}
+
 	if ($line =~ /([0-9\.]+)\] initcall ([a-zA-Z0-9\_]+)\+.*returned/) {
 		if ($done == 0) {
 			$end{$2} = $1;
 			$maxtime = $1;
 		}
 	}
+
+	if ($line =~ /([0-9\.]+)\] async_continuing @ ([0-9]+)/) {
+		my $pid = $2;
+		my $func =  "wait_" . $pid . "_" . $pidctr{$pid};
+		$end{$func} = $1;
+		$maxtime = $1;
+	}
 	if ($line =~ /Write protecting the/) {
 		$done = 1;
 	}
@@ -105,6 +136,8 @@ $styles[9] = "fill:rgb(255,255,128);fill-opacity:0.5;stroke-width:1;stroke:rgb(0
 $styles[10] = "fill:rgb(255,128,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
 $styles[11] = "fill:rgb(128,255,255);fill-opacity:0.5;stroke-width:1;stroke:rgb(0,0,0)";
 
+my $style_wait = "fill:rgb(128,128,128);fill-opacity:0.5;stroke-width:0;stroke:rgb(0,0,0)";
+
 my $mult = 1950.0 / ($maxtime - $firsttime);
 my $threshold2 = ($maxtime - $firsttime) / 120.0;
 my $threshold = $threshold2/10;
@@ -139,11 +172,16 @@ foreach my $key (@initcalls) {
 			$stylecounter = 0;
 		};
 
-		print "<rect x=\"$s\" width=\"$w\" y=\"$y\" height=\"145\" style=\"$style\"/>\n";
-		if ($duration >= $threshold2) {
-			print "<text transform=\"translate($s2,$y2) rotate(90)\">$key</text>\n";
+		if ($type{$key} == 1) {
+			$y = $y + 15;
+			print "<rect x=\"$s\" width=\"$w\" y=\"$y\" height=\"115\" style=\"$style_wait\"/>\n";
 		} else {
-			print "<text transform=\"translate($s3,$y2) rotate(90)\" font-size=\"3pt\">$key</text>\n";
+			print "<rect x=\"$s\" width=\"$w\" y=\"$y\" height=\"145\" style=\"$style\"/>\n";
+			if ($duration >= $threshold2) {
+				print "<text transform=\"translate($s2,$y2) rotate(90)\">$key</text>\n";
+			} else {
+				print "<text transform=\"translate($s3,$y2) rotate(90)\" font-size=\"3pt\">$key</text>\n";
+			}
 		}
 	}
 }
-- 
GitLab


From c59765042f53a79a7a65585042ff463b69cb248c Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sat, 10 Jan 2009 15:43:05 -0800
Subject: [PATCH 058/492] Linux 2.6.29-rc1

---
 Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Makefile b/Makefile
index 28331288341..c06e250eca1 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 28
-EXTRAVERSION =
+SUBLEVEL = 29
+EXTRAVERSION = -rc1
 NAME = Erotic Pickled Herring
 
 # *DOCUMENTATION*
-- 
GitLab


From 62ea9ceb17a74bc7544211bfeecf4170c554ac4f Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Sun, 11 Jan 2009 01:04:16 +0100
Subject: [PATCH 059/492] cpumask: fix CONFIG_NUMA=y sched.c

Impact: fix panic on ia64 with NR_CPUS=1024

struct sched_domain is now a dangling structure; where we really want
static ones, we need to use static_sched_domain.

(As the FIXME in this file says, cpumask_var_t would be better, but
this code is hairy enough without trying to add initialization code to
the right places).

Reported-by: Mike Travis <travis@sgi.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index deb5ac8c12f..f0c0a81d763 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7282,10 +7282,10 @@ cpu_to_phys_group(int cpu, const struct cpumask *cpu_map,
  * groups, so roll our own. Now each node has its own list of groups which
  * gets dynamically allocated.
  */
-static DEFINE_PER_CPU(struct sched_domain, node_domains);
+static DEFINE_PER_CPU(struct static_sched_domain, node_domains);
 static struct sched_group ***sched_group_nodes_bycpu;
 
-static DEFINE_PER_CPU(struct sched_domain, allnodes_domains);
+static DEFINE_PER_CPU(struct static_sched_domain, allnodes_domains);
 static DEFINE_PER_CPU(struct static_sched_group, sched_group_allnodes);
 
 static int cpu_to_allnodes_group(int cpu, const struct cpumask *cpu_map,
@@ -7560,7 +7560,7 @@ static int __build_sched_domains(const struct cpumask *cpu_map,
 #ifdef CONFIG_NUMA
 		if (cpumask_weight(cpu_map) >
 				SD_NODES_PER_DOMAIN*cpumask_weight(nodemask)) {
-			sd = &per_cpu(allnodes_domains, i);
+			sd = &per_cpu(allnodes_domains, i).sd;
 			SD_INIT(sd, ALLNODES);
 			set_domain_attribute(sd, attr);
 			cpumask_copy(sched_domain_span(sd), cpu_map);
@@ -7570,7 +7570,7 @@ static int __build_sched_domains(const struct cpumask *cpu_map,
 		} else
 			p = NULL;
 
-		sd = &per_cpu(node_domains, i);
+		sd = &per_cpu(node_domains, i).sd;
 		SD_INIT(sd, NODE);
 		set_domain_attribute(sd, attr);
 		sched_domain_node_span(cpu_to_node(i), sched_domain_span(sd));
@@ -7688,7 +7688,7 @@ static int __build_sched_domains(const struct cpumask *cpu_map,
 		for_each_cpu(j, nodemask) {
 			struct sched_domain *sd;
 
-			sd = &per_cpu(node_domains, j);
+			sd = &per_cpu(node_domains, j).sd;
 			sd->groups = sg;
 		}
 		sg->__cpu_power = 0;
-- 
GitLab


From f52046b14b1e1a8a02ae48d0c69d39c5e204644f Mon Sep 17 00:00:00 2001
From: Balaji Rao <balajirrao@openmoko.org>
Date: Fri, 9 Jan 2009 01:49:01 +0100
Subject: [PATCH 060/492] mfd: PCF50633 core driver

This patch implements the core of the PCF50633 driver. This core driver has
generic register read/write functions and does interrupt management for its
sub devices.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/mfd/Kconfig               |   9 +
 drivers/mfd/Makefile              |   2 +
 drivers/mfd/pcf50633-core.c       | 710 ++++++++++++++++++++++++++++++
 include/linux/mfd/pcf50633/core.h | 218 +++++++++
 4 files changed, 939 insertions(+)
 create mode 100644 drivers/mfd/pcf50633-core.c
 create mode 100644 include/linux/mfd/pcf50633/core.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 416f9e7286b..3ac32e45b03 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -217,6 +217,15 @@ config MFD_WM8350_I2C
 	  I2C as the control interface.  Additional options must be
 	  selected to enable support for the functionality of the chip.
 
+config MFD_PCF50633
+	tristate "Support for NXP PCF50633"
+	depends on I2C
+	help
+	  Say yes here if you have NXP PCF50633 chip on your board.
+	  This core driver provides register access and IRQ handling
+	  facilities, and registers devices for the various functions
+	  so that function-specific drivers can bind to them.
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 0c9418b36c2..23d4d10981b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -37,3 +37,5 @@ endif
 obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
 
 obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
+
+obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
\ No newline at end of file
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
new file mode 100644
index 00000000000..24508e28e3f
--- /dev/null
+++ b/drivers/mfd/pcf50633-core.c
@@ -0,0 +1,710 @@
+/* NXP PCF50633 Power Management Unit (PMU) driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * 	   Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+
+#include <linux/mfd/pcf50633/core.h>
+
+/* Two MBCS registers used during cold start */
+#define PCF50633_REG_MBCS1		0x4b
+#define PCF50633_REG_MBCS2		0x4c
+#define PCF50633_MBCS1_USBPRES 		0x01
+#define PCF50633_MBCS1_ADAPTPRES	0x01
+
+static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
+{
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg,
+				num, data);
+	if (ret < 0)
+		dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg);
+
+	return ret;
+}
+
+static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
+{
+	int ret;
+
+	ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg,
+				num, data);
+	if (ret < 0)
+		dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg);
+
+	return ret;
+
+}
+
+/* Read a block of upto 32 regs  */
+int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
+					int nr_regs, u8 *data)
+{
+	int ret;
+
+	mutex_lock(&pcf->lock);
+	ret = __pcf50633_read(pcf, reg, nr_regs, data);
+	mutex_unlock(&pcf->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_read_block);
+
+/* Write a block of upto 32 regs  */
+int pcf50633_write_block(struct pcf50633 *pcf , u8 reg,
+					int nr_regs, u8 *data)
+{
+	int ret;
+
+	mutex_lock(&pcf->lock);
+	ret = __pcf50633_write(pcf, reg, nr_regs, data);
+	mutex_unlock(&pcf->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_write_block);
+
+u8 pcf50633_reg_read(struct pcf50633 *pcf, u8 reg)
+{
+	u8 val;
+
+	mutex_lock(&pcf->lock);
+	__pcf50633_read(pcf, reg, 1, &val);
+	mutex_unlock(&pcf->lock);
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(pcf50633_reg_read);
+
+int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val)
+{
+	int ret;
+
+	mutex_lock(&pcf->lock);
+	ret = __pcf50633_write(pcf, reg, 1, &val);
+	mutex_unlock(&pcf->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_reg_write);
+
+int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val)
+{
+	int ret;
+	u8 tmp;
+
+	val &= mask;
+
+	mutex_lock(&pcf->lock);
+	ret = __pcf50633_read(pcf, reg, 1, &tmp);
+	if (ret < 0)
+		goto out;
+
+	tmp &= ~mask;
+	tmp |= val;
+	ret = __pcf50633_write(pcf, reg, 1, &tmp);
+
+out:
+	mutex_unlock(&pcf->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_reg_set_bit_mask);
+
+int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 val)
+{
+	int ret;
+	u8 tmp;
+
+	mutex_lock(&pcf->lock);
+	ret = __pcf50633_read(pcf, reg, 1, &tmp);
+	if (ret < 0)
+		goto out;
+
+	tmp &= ~val;
+	ret = __pcf50633_write(pcf, reg, 1, &tmp);
+
+out:
+	mutex_unlock(&pcf->lock);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_reg_clear_bits);
+
+/* sysfs attributes */
+static ssize_t show_dump_regs(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct pcf50633 *pcf = dev_get_drvdata(dev);
+	u8 dump[16];
+	int n, n1, idx = 0;
+	char *buf1 = buf;
+	static u8 address_no_read[] = { /* must be ascending */
+		PCF50633_REG_INT1,
+		PCF50633_REG_INT2,
+		PCF50633_REG_INT3,
+		PCF50633_REG_INT4,
+		PCF50633_REG_INT5,
+		0 /* terminator */
+	};
+
+	for (n = 0; n < 256; n += sizeof(dump)) {
+		for (n1 = 0; n1 < sizeof(dump); n1++)
+			if (n == address_no_read[idx]) {
+				idx++;
+				dump[n1] = 0x00;
+			} else
+				dump[n1] = pcf50633_reg_read(pcf, n + n1);
+
+		hex_dump_to_buffer(dump, sizeof(dump), 16, 1, buf1, 128, 0);
+		buf1 += strlen(buf1);
+		*buf1++ = '\n';
+		*buf1 = '\0';
+	}
+
+	return buf1 - buf;
+}
+static DEVICE_ATTR(dump_regs, 0400, show_dump_regs, NULL);
+
+static ssize_t show_resume_reason(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct pcf50633 *pcf = dev_get_drvdata(dev);
+	int n;
+
+	n = sprintf(buf, "%02x%02x%02x%02x%02x\n",
+				pcf->resume_reason[0],
+				pcf->resume_reason[1],
+				pcf->resume_reason[2],
+				pcf->resume_reason[3],
+				pcf->resume_reason[4]);
+
+	return n;
+}
+static DEVICE_ATTR(resume_reason, 0400, show_resume_reason, NULL);
+
+static struct attribute *pcf_sysfs_entries[] = {
+	&dev_attr_dump_regs.attr,
+	&dev_attr_resume_reason.attr,
+	NULL,
+};
+
+static struct attribute_group pcf_attr_group = {
+	.name	= NULL,			/* put in device directory */
+	.attrs	= pcf_sysfs_entries,
+};
+
+int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
+			void (*handler) (int, void *), void *data)
+{
+	if (irq < 0 || irq > PCF50633_NUM_IRQ || !handler)
+		return -EINVAL;
+
+	if (WARN_ON(pcf->irq_handler[irq].handler))
+		return -EBUSY;
+
+	mutex_lock(&pcf->lock);
+	pcf->irq_handler[irq].handler = handler;
+	pcf->irq_handler[irq].data = data;
+	mutex_unlock(&pcf->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_register_irq);
+
+int pcf50633_free_irq(struct pcf50633 *pcf, int irq)
+{
+	if (irq < 0 || irq > PCF50633_NUM_IRQ)
+		return -EINVAL;
+
+	mutex_lock(&pcf->lock);
+	pcf->irq_handler[irq].handler = NULL;
+	mutex_unlock(&pcf->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_free_irq);
+
+static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask)
+{
+	u8 reg, bits, tmp;
+	int ret = 0, idx;
+
+	idx = irq >> 3;
+	reg =  PCF50633_REG_INT1M + idx;
+	bits = 1 << (irq & 0x07);
+
+	mutex_lock(&pcf->lock);
+
+	if (mask) {
+		ret = __pcf50633_read(pcf, reg, 1, &tmp);
+		if (ret < 0)
+			goto out;
+
+		tmp |= bits;
+
+		ret = __pcf50633_write(pcf, reg, 1, &tmp);
+		if (ret < 0)
+			goto out;
+
+		pcf->mask_regs[idx] &= ~bits;
+		pcf->mask_regs[idx] |= bits;
+	} else {
+		ret = __pcf50633_read(pcf, reg, 1, &tmp);
+		if (ret < 0)
+			goto out;
+
+		tmp &= ~bits;
+
+		ret = __pcf50633_write(pcf, reg, 1, &tmp);
+		if (ret < 0)
+			goto out;
+
+		pcf->mask_regs[idx] &= ~bits;
+	}
+out:
+	mutex_unlock(&pcf->lock);
+
+	return ret;
+}
+
+int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
+{
+	dev_info(pcf->dev, "Masking IRQ %d\n", irq);
+
+	return __pcf50633_irq_mask_set(pcf, irq, 1);
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
+
+int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
+{
+	dev_info(pcf->dev, "Unmasking IRQ %d\n", irq);
+
+	return __pcf50633_irq_mask_set(pcf, irq, 0);
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_unmask);
+
+int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq)
+{
+	u8 reg, bits;
+
+	reg =  irq >> 3;
+	bits = 1 << (irq & 0x07);
+
+	return pcf->mask_regs[reg] & bits;
+}
+EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get);
+
+static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq)
+{
+	if (pcf->irq_handler[irq].handler)
+		pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data);
+}
+
+/* Maximum amount of time ONKEY is held before emergency action is taken */
+#define PCF50633_ONKEY1S_TIMEOUT 8
+
+static void pcf50633_irq_worker(struct work_struct *work)
+{
+	struct pcf50633 *pcf;
+	int ret, i, j;
+	u8 pcf_int[5], chgstat;
+
+	pcf = container_of(work, struct pcf50633, irq_work);
+
+	/* Read the 5 INT regs in one transaction */
+	ret = pcf50633_read_block(pcf, PCF50633_REG_INT1,
+						ARRAY_SIZE(pcf_int), pcf_int);
+	if (ret != ARRAY_SIZE(pcf_int)) {
+		dev_err(pcf->dev, "Error reading INT registers\n");
+
+		/*
+		 * If this doesn't ACK the interrupt to the chip, we'll be
+		 * called once again as we're level triggered.
+		 */
+		goto out;
+	}
+
+	/* We immediately read the usb and adapter status. We thus make sure
+	 * only of USBINS/USBREM IRQ handlers are called */
+	if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
+		chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+		if (chgstat & (0x3 << 4))
+			pcf_int[0] &= ~(1 << PCF50633_INT1_USBREM);
+		else
+			pcf_int[0] &= ~(1 << PCF50633_INT1_USBINS);
+	}
+
+	/* Make sure only one of ADPINS or ADPREM is set */
+	if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
+		chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+		if (chgstat & (0x3 << 4))
+			pcf_int[0] &= ~(1 << PCF50633_INT1_ADPREM);
+		else
+			pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS);
+	}
+
+	dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
+			"INT4=0x%02x INT5=0x%02x\n", pcf_int[0],
+			pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]);
+
+	/* Some revisions of the chip don't have a 8s standby mode on
+	 * ONKEY1S press. We try to manually do it in such cases. */
+	if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) {
+		dev_info(pcf->dev, "ONKEY1S held for %d secs\n",
+							pcf->onkey1s_held);
+		if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT)
+			if (pcf->pdata->force_shutdown)
+				pcf->pdata->force_shutdown(pcf);
+	}
+
+	if (pcf_int[2] & PCF50633_INT3_ONKEY1S) {
+		dev_info(pcf->dev, "ONKEY1S held\n");
+		pcf->onkey1s_held = 1 ;
+
+		/* Unmask IRQ_SECOND */
+		pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M,
+						PCF50633_INT1_SECOND);
+
+		/* Unmask IRQ_ONKEYR */
+		pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M,
+						PCF50633_INT2_ONKEYR);
+	}
+
+	if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) {
+		pcf->onkey1s_held = 0;
+
+		/* Mask SECOND and ONKEYR interrupts */
+		if (pcf->mask_regs[0] & PCF50633_INT1_SECOND)
+			pcf50633_reg_set_bit_mask(pcf,
+					PCF50633_REG_INT1M,
+					PCF50633_INT1_SECOND,
+					PCF50633_INT1_SECOND);
+
+		if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR)
+			pcf50633_reg_set_bit_mask(pcf,
+					PCF50633_REG_INT2M,
+					PCF50633_INT2_ONKEYR,
+					PCF50633_INT2_ONKEYR);
+	}
+
+	/* Have we just resumed ? */
+	if (pcf->is_suspended) {
+		pcf->is_suspended = 0;
+
+		/* Set the resume reason filtering out non resumers */
+		for (i = 0; i < ARRAY_SIZE(pcf_int); i++)
+			pcf->resume_reason[i] = pcf_int[i] &
+						pcf->pdata->resumers[i];
+
+		/* Make sure we don't pass on any ONKEY events to
+		 * userspace now */
+		pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(pcf_int); i++) {
+		/* Unset masked interrupts */
+		pcf_int[i] &= ~pcf->mask_regs[i];
+
+		for (j = 0; j < 8 ; j++)
+			if (pcf_int[i] & (1 << j))
+				pcf50633_irq_call_handler(pcf, (i * 8) + j);
+	}
+
+out:
+	put_device(pcf->dev);
+	enable_irq(pcf->irq);
+}
+
+static irqreturn_t pcf50633_irq(int irq, void *data)
+{
+	struct pcf50633 *pcf = data;
+
+	dev_dbg(pcf->dev, "pcf50633_irq\n");
+
+	get_device(pcf->dev);
+	disable_irq(pcf->irq);
+	schedule_work(&pcf->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static void
+pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
+						struct platform_device **pdev)
+{
+	struct pcf50633_subdev_pdata *subdev_pdata;
+	int ret;
+
+	*pdev = platform_device_alloc(name, -1);
+	if (!*pdev) {
+		dev_err(pcf->dev, "Falied to allocate %s\n", name);
+		return;
+	}
+
+	subdev_pdata = kmalloc(sizeof(*subdev_pdata), GFP_KERNEL);
+	if (!subdev_pdata) {
+		dev_err(pcf->dev, "Error allocating subdev pdata\n");
+		platform_device_put(*pdev);
+	}
+
+	subdev_pdata->pcf = pcf;
+	platform_device_add_data(*pdev, subdev_pdata, sizeof(*subdev_pdata));
+
+	(*pdev)->dev.parent = pcf->dev;
+
+	ret = platform_device_add(*pdev);
+	if (ret) {
+		dev_err(pcf->dev, "Failed to register %s: %d\n", name, ret);
+		platform_device_put(*pdev);
+		*pdev = NULL;
+	}
+}
+
+#ifdef CONFIG_PM
+static int pcf50633_suspend(struct device *dev, pm_message_t state)
+{
+	struct pcf50633 *pcf;
+	int ret = 0, i;
+	u8 res[5];
+
+	pcf = dev_get_drvdata(dev);
+
+	/* Make sure our interrupt handlers are not called
+	 * henceforth */
+	disable_irq(pcf->irq);
+
+	/* Make sure that any running IRQ worker has quit */
+	cancel_work_sync(&pcf->irq_work);
+
+	/* Save the masks */
+	ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M,
+				ARRAY_SIZE(pcf->suspend_irq_masks),
+					pcf->suspend_irq_masks);
+	if (ret < 0) {
+		dev_err(pcf->dev, "error saving irq masks\n");
+		goto out;
+	}
+
+	/* Write wakeup irq masks */
+	for (i = 0; i < ARRAY_SIZE(res); i++)
+		res[i] = ~pcf->pdata->resumers[i];
+
+	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+					ARRAY_SIZE(res), &res[0]);
+	if (ret < 0) {
+		dev_err(pcf->dev, "error writing wakeup irq masks\n");
+		goto out;
+	}
+
+	pcf->is_suspended = 1;
+
+out:
+	return ret;
+}
+
+static int pcf50633_resume(struct device *dev)
+{
+	struct pcf50633 *pcf;
+	int ret;
+
+	pcf = dev_get_drvdata(dev);
+
+	/* Write the saved mask registers */
+	ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
+				ARRAY_SIZE(pcf->suspend_irq_masks),
+					pcf->suspend_irq_masks);
+	if (ret < 0)
+		dev_err(pcf->dev, "Error restoring saved suspend masks\n");
+
+	/* Restore regulators' state */
+
+
+	get_device(pcf->dev);
+
+	/*
+	 * Clear any pending interrupts and set resume reason if any.
+	 * This will leave with enable_irq()
+	 */
+	pcf50633_irq_worker(&pcf->irq_work);
+
+	return 0;
+}
+#else
+#define pcf50633_suspend NULL
+#define pcf50633_resume NULL
+#endif
+
+static int __devinit pcf50633_probe(struct i2c_client *client,
+				const struct i2c_device_id *ids)
+{
+	struct pcf50633 *pcf;
+	struct pcf50633_platform_data *pdata = client->dev.platform_data;
+	int i, ret = 0;
+	int version, variant;
+
+	pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
+	if (!pcf)
+		return -ENOMEM;
+
+	pcf->pdata = pdata;
+
+	mutex_init(&pcf->lock);
+
+	i2c_set_clientdata(client, pcf);
+	pcf->dev = &client->dev;
+	pcf->i2c_client = client;
+	pcf->irq = client->irq;
+
+	INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
+
+	version = pcf50633_reg_read(pcf, 0);
+	variant = pcf50633_reg_read(pcf, 1);
+	if (version < 0 || variant < 0) {
+		dev_err(pcf->dev, "Unable to probe pcf50633\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	dev_info(pcf->dev, "Probed device version %d variant %d\n",
+							version, variant);
+
+	/* Enable all interrupts except RTC SECOND */
+	pcf->mask_regs[0] = 0x80;
+	pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]);
+	pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00);
+	pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00);
+	pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
+	pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
+
+	/* Create sub devices */
+	pcf50633_client_dev_register(pcf, "pcf50633-input",
+						&pcf->input_pdev);
+	pcf50633_client_dev_register(pcf, "pcf50633-rtc",
+						&pcf->rtc_pdev);
+	pcf50633_client_dev_register(pcf, "pcf50633-mbc",
+						&pcf->mbc_pdev);
+	pcf50633_client_dev_register(pcf, "pcf50633-adc",
+						&pcf->adc_pdev);
+
+	for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
+		struct platform_device *pdev;
+
+		pdev = platform_device_alloc("pcf50633-regltr", i);
+		if (!pdev) {
+			dev_err(pcf->dev, "Cannot create regulator\n");
+			continue;
+		}
+
+		pdev->dev.parent = pcf->dev;
+		pdev->dev.platform_data = &pdata->reg_init_data[i];
+		pdev->dev.driver_data = pcf;
+		pcf->regulator_pdev[i] = pdev;
+
+		platform_device_add(pdev);
+	}
+
+	if (client->irq) {
+		set_irq_handler(client->irq, handle_level_irq);
+		ret = request_irq(client->irq, pcf50633_irq,
+				IRQF_TRIGGER_LOW, "pcf50633", pcf);
+
+		if (ret) {
+			dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
+			goto err;
+		}
+	} else {
+		dev_err(pcf->dev, "No IRQ configured\n");
+		goto err;
+	}
+
+	if (enable_irq_wake(client->irq) < 0)
+		dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
+			"in this hardware revision", client->irq);
+
+	ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
+	if (ret)
+		dev_err(pcf->dev, "error creating sysfs entries\n");
+
+	if (pdata->probe_done)
+		pdata->probe_done(pcf);
+
+	return 0;
+
+err:
+	kfree(pcf);
+	return ret;
+}
+
+static int __devexit pcf50633_remove(struct i2c_client *client)
+{
+	struct pcf50633 *pcf = i2c_get_clientdata(client);
+	int i;
+
+	free_irq(pcf->irq, pcf);
+
+	platform_device_unregister(pcf->input_pdev);
+	platform_device_unregister(pcf->rtc_pdev);
+	platform_device_unregister(pcf->mbc_pdev);
+	platform_device_unregister(pcf->adc_pdev);
+
+	for (i = 0; i < PCF50633_NUM_REGULATORS; i++)
+		platform_device_unregister(pcf->regulator_pdev[i]);
+
+	kfree(pcf);
+
+	return 0;
+}
+
+static struct i2c_device_id pcf50633_id_table[] = {
+	{"pcf50633", 0x73},
+};
+
+static struct i2c_driver pcf50633_driver = {
+	.driver = {
+		.name	= "pcf50633",
+		.suspend = pcf50633_suspend,
+		.resume	= pcf50633_resume,
+	},
+	.id_table = pcf50633_id_table,
+	.probe = pcf50633_probe,
+	.remove = __devexit_p(pcf50633_remove),
+};
+
+static int __init pcf50633_init(void)
+{
+	return i2c_add_driver(&pcf50633_driver);
+}
+
+static void __exit pcf50633_exit(void)
+{
+	i2c_del_driver(&pcf50633_driver);
+}
+
+MODULE_DESCRIPTION("I2C chip driver for NXP PCF50633 PMU");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_LICENSE("GPL");
+
+module_init(pcf50633_init);
+module_exit(pcf50633_exit);
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
new file mode 100644
index 00000000000..4455b212d75
--- /dev/null
+++ b/include/linux/mfd/pcf50633/core.h
@@ -0,0 +1,218 @@
+/*
+ * core.h  -- Core driver for NXP PCF50633
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_CORE_H
+#define __LINUX_MFD_PCF50633_CORE_H
+
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/power_supply.h>
+
+struct pcf50633;
+
+#define PCF50633_NUM_REGULATORS	11
+
+struct pcf50633_platform_data {
+	struct regulator_init_data reg_init_data[PCF50633_NUM_REGULATORS];
+
+	char **batteries;
+	int num_batteries;
+
+	/* Callbacks */
+	void (*probe_done)(struct pcf50633 *);
+	void (*mbc_event_callback)(struct pcf50633 *, int);
+	void (*regulator_registered)(struct pcf50633 *, int);
+	void (*force_shutdown)(struct pcf50633 *);
+
+	u8 resumers[5];
+};
+
+struct pcf50633_subdev_pdata {
+	struct pcf50633 *pcf;
+};
+
+struct pcf50633_irq {
+	void (*handler) (int, void *);
+	void *data;
+};
+
+int pcf50633_register_irq(struct pcf50633 *pcf, int irq,
+			void (*handler) (int, void *), void *data);
+int pcf50633_free_irq(struct pcf50633 *pcf, int irq);
+
+int pcf50633_irq_mask(struct pcf50633 *pcf, int irq);
+int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq);
+int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq);
+
+int pcf50633_read_block(struct pcf50633 *, u8 reg,
+					int nr_regs, u8 *data);
+int pcf50633_write_block(struct pcf50633 *pcf, u8 reg,
+					int nr_regs, u8 *data);
+u8 pcf50633_reg_read(struct pcf50633 *, u8 reg);
+int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val);
+
+int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val);
+int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 bits);
+
+/* Interrupt registers */
+
+#define PCF50633_REG_INT1	0x02
+#define PCF50633_REG_INT2	0x03
+#define PCF50633_REG_INT3	0x04
+#define PCF50633_REG_INT4	0x05
+#define PCF50633_REG_INT5	0x06
+
+#define PCF50633_REG_INT1M	0x07
+#define PCF50633_REG_INT2M	0x08
+#define PCF50633_REG_INT3M	0x09
+#define PCF50633_REG_INT4M	0x0a
+#define PCF50633_REG_INT5M	0x0b
+
+enum {
+	/* Chip IRQs */
+	PCF50633_IRQ_ADPINS,
+	PCF50633_IRQ_ADPREM,
+	PCF50633_IRQ_USBINS,
+	PCF50633_IRQ_USBREM,
+	PCF50633_IRQ_RESERVED1,
+	PCF50633_IRQ_RESERVED2,
+	PCF50633_IRQ_ALARM,
+	PCF50633_IRQ_SECOND,
+	PCF50633_IRQ_ONKEYR,
+	PCF50633_IRQ_ONKEYF,
+	PCF50633_IRQ_EXTON1R,
+	PCF50633_IRQ_EXTON1F,
+	PCF50633_IRQ_EXTON2R,
+	PCF50633_IRQ_EXTON2F,
+	PCF50633_IRQ_EXTON3R,
+	PCF50633_IRQ_EXTON3F,
+	PCF50633_IRQ_BATFULL,
+	PCF50633_IRQ_CHGHALT,
+	PCF50633_IRQ_THLIMON,
+	PCF50633_IRQ_THLIMOFF,
+	PCF50633_IRQ_USBLIMON,
+	PCF50633_IRQ_USBLIMOFF,
+	PCF50633_IRQ_ADCRDY,
+	PCF50633_IRQ_ONKEY1S,
+	PCF50633_IRQ_LOWSYS,
+	PCF50633_IRQ_LOWBAT,
+	PCF50633_IRQ_HIGHTMP,
+	PCF50633_IRQ_AUTOPWRFAIL,
+	PCF50633_IRQ_DWN1PWRFAIL,
+	PCF50633_IRQ_DWN2PWRFAIL,
+	PCF50633_IRQ_LEDPWRFAIL,
+	PCF50633_IRQ_LEDOVP,
+	PCF50633_IRQ_LDO1PWRFAIL,
+	PCF50633_IRQ_LDO2PWRFAIL,
+	PCF50633_IRQ_LDO3PWRFAIL,
+	PCF50633_IRQ_LDO4PWRFAIL,
+	PCF50633_IRQ_LDO5PWRFAIL,
+	PCF50633_IRQ_LDO6PWRFAIL,
+	PCF50633_IRQ_HCLDOPWRFAIL,
+	PCF50633_IRQ_HCLDOOVL,
+
+	/* Always last */
+	PCF50633_NUM_IRQ,
+};
+
+struct pcf50633 {
+	struct device *dev;
+	struct i2c_client *i2c_client;
+
+	struct pcf50633_platform_data *pdata;
+	int irq;
+	struct pcf50633_irq irq_handler[PCF50633_NUM_IRQ];
+	struct work_struct irq_work;
+	struct mutex lock;
+
+	u8 mask_regs[5];
+
+	u8 suspend_irq_masks[5];
+	u8 resume_reason[5];
+	int is_suspended;
+
+	int onkey1s_held;
+
+	struct platform_device *rtc_pdev;
+	struct platform_device *mbc_pdev;
+	struct platform_device *adc_pdev;
+	struct platform_device *input_pdev;
+	struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS];
+};
+
+enum pcf50633_reg_int1 {
+	PCF50633_INT1_ADPINS	= 0x01,	/* Adapter inserted */
+	PCF50633_INT1_ADPREM	= 0x02,	/* Adapter removed */
+	PCF50633_INT1_USBINS	= 0x04,	/* USB inserted */
+	PCF50633_INT1_USBREM	= 0x08,	/* USB removed */
+	/* reserved */
+	PCF50633_INT1_ALARM	= 0x40, /* RTC alarm time is reached */
+	PCF50633_INT1_SECOND	= 0x80,	/* RTC periodic second interrupt */
+};
+
+enum pcf50633_reg_int2 {
+	PCF50633_INT2_ONKEYR	= 0x01, /* ONKEY rising edge */
+	PCF50633_INT2_ONKEYF	= 0x02, /* ONKEY falling edge */
+	PCF50633_INT2_EXTON1R	= 0x04, /* EXTON1 rising edge */
+	PCF50633_INT2_EXTON1F	= 0x08, /* EXTON1 falling edge */
+	PCF50633_INT2_EXTON2R	= 0x10, /* EXTON2 rising edge */
+	PCF50633_INT2_EXTON2F	= 0x20, /* EXTON2 falling edge */
+	PCF50633_INT2_EXTON3R	= 0x40, /* EXTON3 rising edge */
+	PCF50633_INT2_EXTON3F	= 0x80, /* EXTON3 falling edge */
+};
+
+enum pcf50633_reg_int3 {
+	PCF50633_INT3_BATFULL	= 0x01, /* Battery full */
+	PCF50633_INT3_CHGHALT	= 0x02,	/* Charger halt */
+	PCF50633_INT3_THLIMON	= 0x04,
+	PCF50633_INT3_THLIMOFF	= 0x08,
+	PCF50633_INT3_USBLIMON	= 0x10,
+	PCF50633_INT3_USBLIMOFF	= 0x20,
+	PCF50633_INT3_ADCRDY	= 0x40, /* ADC result ready */
+	PCF50633_INT3_ONKEY1S	= 0x80,	/* ONKEY pressed 1 second */
+};
+
+enum pcf50633_reg_int4 {
+	PCF50633_INT4_LOWSYS		= 0x01,
+	PCF50633_INT4_LOWBAT		= 0x02,
+	PCF50633_INT4_HIGHTMP		= 0x04,
+	PCF50633_INT4_AUTOPWRFAIL	= 0x08,
+	PCF50633_INT4_DWN1PWRFAIL	= 0x10,
+	PCF50633_INT4_DWN2PWRFAIL	= 0x20,
+	PCF50633_INT4_LEDPWRFAIL	= 0x40,
+	PCF50633_INT4_LEDOVP		= 0x80,
+};
+
+enum pcf50633_reg_int5 {
+	PCF50633_INT5_LDO1PWRFAIL	= 0x01,
+	PCF50633_INT5_LDO2PWRFAIL	= 0x02,
+	PCF50633_INT5_LDO3PWRFAIL	= 0x04,
+	PCF50633_INT5_LDO4PWRFAIL	= 0x08,
+	PCF50633_INT5_LDO5PWRFAIL	= 0x10,
+	PCF50633_INT5_LDO6PWRFAIL	= 0x20,
+	PCF50633_INT5_HCLDOPWRFAIL	= 0x40,
+	PCF50633_INT5_HCLDOOVL		= 0x80,
+};
+
+/* misc. registers */
+#define PCF50633_REG_OOCSHDWN	0x0c
+
+/* LED registers */
+#define PCF50633_REG_LEDOUT 0x28
+#define PCF50633_REG_LEDENA 0x29
+#define PCF50633_REG_LEDCTL 0x2a
+#define PCF50633_REG_LEDDIM 0x2b
+
+#endif
+
-- 
GitLab


From 08c3e06a5eb27d43b712adef18379f8464425e71 Mon Sep 17 00:00:00 2001
From: Balaji Rao <balajirrao@openmoko.org>
Date: Fri, 9 Jan 2009 01:49:26 +0100
Subject: [PATCH 061/492] mfd: PCF50633 adc driver

This patch adds basic support for the PCF50633 ADC. The subtractive mode
is not supported yet.

Since we don't have adc subsystem, it currently lives in drivers/mfd.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Acked-by: Jonathan Cameron <jonathan.cameron@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/mfd/Kconfig              |   7 +
 drivers/mfd/Makefile             |   3 +-
 drivers/mfd/pcf50633-adc.c       | 277 +++++++++++++++++++++++++++++++
 include/linux/mfd/pcf50633/adc.h |  72 ++++++++
 4 files changed, 358 insertions(+), 1 deletion(-)
 create mode 100644 drivers/mfd/pcf50633-adc.c
 create mode 100644 include/linux/mfd/pcf50633/adc.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3ac32e45b03..2fa3504e165 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -226,6 +226,13 @@ config MFD_PCF50633
 	  facilities, and registers devices for the various functions
 	  so that function-specific drivers can bind to them.
 
+config PCF50633_ADC
+	tristate "Support for NXP PCF50633 ADC"
+	depends on MFD_PCF50633
+	help
+	 Say yes here if you want to include support for ADC in the
+	 NXP PCF50633 chip.
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 23d4d10981b..138f9c4d3d7 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -38,4 +38,5 @@ obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
 
 obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
 
-obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
\ No newline at end of file
+obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
+obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
\ No newline at end of file
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
new file mode 100644
index 00000000000..c2d05becfa9
--- /dev/null
+++ b/drivers/mfd/pcf50633-adc.c
@@ -0,0 +1,277 @@
+/* NXP PCF50633 ADC Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  NOTE: This driver does not yet support subtractive ADC mode, which means
+ *  you can do only one measurement per read request.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/completion.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/adc.h>
+
+struct pcf50633_adc_request {
+	int mux;
+	int avg;
+	int result;
+	void (*callback)(struct pcf50633 *, void *, int);
+	void *callback_param;
+
+	/* Used in case of sync requests */
+	struct completion completion;
+
+};
+
+#define PCF50633_MAX_ADC_FIFO_DEPTH 8
+
+struct pcf50633_adc {
+	struct pcf50633 *pcf;
+
+	/* Private stuff */
+	struct pcf50633_adc_request *queue[PCF50633_MAX_ADC_FIFO_DEPTH];
+	int queue_head;
+	int queue_tail;
+	struct mutex queue_mutex;
+};
+
+static inline struct pcf50633_adc *__to_adc(struct pcf50633 *pcf)
+{
+	return platform_get_drvdata(pcf->adc_pdev);
+}
+
+static void adc_setup(struct pcf50633 *pcf, int channel, int avg)
+{
+	channel &= PCF50633_ADCC1_ADCMUX_MASK;
+
+	/* kill ratiometric, but enable ACCSW biasing */
+	pcf50633_reg_write(pcf, PCF50633_REG_ADCC2, 0x00);
+	pcf50633_reg_write(pcf, PCF50633_REG_ADCC3, 0x01);
+
+	/* start ADC conversion on selected channel */
+	pcf50633_reg_write(pcf, PCF50633_REG_ADCC1, channel | avg |
+		    PCF50633_ADCC1_ADCSTART | PCF50633_ADCC1_RES_10BIT);
+}
+
+static void trigger_next_adc_job_if_any(struct pcf50633 *pcf)
+{
+	struct pcf50633_adc *adc = __to_adc(pcf);
+	int head;
+
+	mutex_lock(&adc->queue_mutex);
+
+	head = adc->queue_head;
+
+	if (!adc->queue[head]) {
+		mutex_unlock(&adc->queue_mutex);
+		return;
+	}
+	mutex_unlock(&adc->queue_mutex);
+
+	adc_setup(pcf, adc->queue[head]->mux, adc->queue[head]->avg);
+}
+
+static int
+adc_enqueue_request(struct pcf50633 *pcf, struct pcf50633_adc_request *req)
+{
+	struct pcf50633_adc *adc = __to_adc(pcf);
+	int head, tail;
+
+	mutex_lock(&adc->queue_mutex);
+
+	head = adc->queue_head;
+	tail = adc->queue_tail;
+
+	if (adc->queue[tail]) {
+		mutex_unlock(&adc->queue_mutex);
+		return -EBUSY;
+	}
+
+	adc->queue[tail] = req;
+	adc->queue_tail = (tail + 1) & (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
+
+	mutex_unlock(&adc->queue_mutex);
+
+	trigger_next_adc_job_if_any(pcf);
+
+	return 0;
+}
+
+static void
+pcf50633_adc_sync_read_callback(struct pcf50633 *pcf, void *param, int result)
+{
+	struct pcf50633_adc_request *req = param;
+
+	req->result = result;
+	complete(&req->completion);
+}
+
+int pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg)
+{
+	struct pcf50633_adc_request *req;
+
+	/* req is freed when the result is ready, in interrupt handler */
+	req = kzalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->mux = mux;
+	req->avg = avg;
+	req->callback =  pcf50633_adc_sync_read_callback;
+	req->callback_param = req;
+
+	init_completion(&req->completion);
+	adc_enqueue_request(pcf, req);
+	wait_for_completion(&req->completion);
+
+	return req->result;
+}
+EXPORT_SYMBOL_GPL(pcf50633_adc_sync_read);
+
+int pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
+			     void (*callback)(struct pcf50633 *, void *, int),
+			     void *callback_param)
+{
+	struct pcf50633_adc_request *req;
+
+	/* req is freed when the result is ready, in interrupt handler */
+	req = kmalloc(sizeof(*req), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->mux = mux;
+	req->avg = avg;
+	req->callback = callback;
+	req->callback_param = callback_param;
+
+	adc_enqueue_request(pcf, req);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcf50633_adc_async_read);
+
+static int adc_result(struct pcf50633 *pcf)
+{
+	u8 adcs1, adcs3;
+	u16 result;
+
+	adcs1 = pcf50633_reg_read(pcf, PCF50633_REG_ADCS1);
+	adcs3 = pcf50633_reg_read(pcf, PCF50633_REG_ADCS3);
+	result = (adcs1 << 2) | (adcs3 & PCF50633_ADCS3_ADCDAT1L_MASK);
+
+	dev_dbg(pcf->dev, "adc result = %d\n", result);
+
+	return result;
+}
+
+static void pcf50633_adc_irq(int irq, void *data)
+{
+	struct pcf50633_adc *adc = data;
+	struct pcf50633 *pcf = adc->pcf;
+	struct pcf50633_adc_request *req;
+	int head;
+
+	mutex_lock(&adc->queue_mutex);
+	head = adc->queue_head;
+
+	req = adc->queue[head];
+	if (WARN_ON(!req)) {
+		dev_err(pcf->dev, "pcf50633-adc irq: ADC queue empty!\n");
+		mutex_unlock(&adc->queue_mutex);
+		return;
+	}
+	adc->queue[head] = NULL;
+	adc->queue_head = (head + 1) &
+				      (PCF50633_MAX_ADC_FIFO_DEPTH - 1);
+
+	mutex_unlock(&adc->queue_mutex);
+
+	req->callback(pcf, req->callback_param, adc_result(pcf));
+	kfree(req);
+
+	trigger_next_adc_job_if_any(pcf);
+}
+
+static int __devinit pcf50633_adc_probe(struct platform_device *pdev)
+{
+	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
+	struct pcf50633_adc *adc;
+
+	adc = kzalloc(sizeof(*adc), GFP_KERNEL);
+	if (!adc)
+		return -ENOMEM;
+
+	adc->pcf = pdata->pcf;
+	platform_set_drvdata(pdev, adc);
+
+	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ADCRDY,
+					pcf50633_adc_irq, adc);
+
+	mutex_init(&adc->queue_mutex);
+
+	return 0;
+}
+
+static int __devexit pcf50633_adc_remove(struct platform_device *pdev)
+{
+	struct pcf50633_adc *adc = platform_get_drvdata(pdev);
+	int i, head;
+
+	pcf50633_free_irq(adc->pcf, PCF50633_IRQ_ADCRDY);
+
+	mutex_lock(&adc->queue_mutex);
+	head = adc->queue_head;
+
+	if (WARN_ON(adc->queue[head]))
+		dev_err(adc->pcf->dev,
+			"adc driver removed with request pending\n");
+
+	for (i = 0; i < PCF50633_MAX_ADC_FIFO_DEPTH; i++)
+		kfree(adc->queue[i]);
+
+	mutex_unlock(&adc->queue_mutex);
+	kfree(adc);
+
+	return 0;
+}
+
+static struct platform_driver pcf50633_adc_driver = {
+	.driver = {
+		.name = "pcf50633-adc",
+	},
+	.probe = pcf50633_adc_probe,
+	.remove = __devexit_p(pcf50633_adc_remove),
+};
+
+static int __init pcf50633_adc_init(void)
+{
+	return platform_driver_register(&pcf50633_adc_driver);
+}
+module_init(pcf50633_adc_init);
+
+static void __exit pcf50633_adc_exit(void)
+{
+	platform_driver_unregister(&pcf50633_adc_driver);
+}
+module_exit(pcf50633_adc_exit);
+
+MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
+MODULE_DESCRIPTION("PCF50633 adc driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-adc");
+
diff --git a/include/linux/mfd/pcf50633/adc.h b/include/linux/mfd/pcf50633/adc.h
new file mode 100644
index 00000000000..56669b4183a
--- /dev/null
+++ b/include/linux/mfd/pcf50633/adc.h
@@ -0,0 +1,72 @@
+/*
+ * adc.h  -- Driver for NXP PCF50633 ADC
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_ADC_H
+#define __LINUX_MFD_PCF50633_ADC_H
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/platform_device.h>
+
+/* ADC Registers */
+#define PCF50633_REG_ADCC3		0x52
+#define PCF50633_REG_ADCC2		0x53
+#define PCF50633_REG_ADCC1		0x54
+#define PCF50633_REG_ADCS1		0x55
+#define PCF50633_REG_ADCS2		0x56
+#define PCF50633_REG_ADCS3		0x57
+
+#define PCF50633_ADCC1_ADCSTART		0x01
+#define PCF50633_ADCC1_RES_10BIT	0x02
+#define PCF50633_ADCC1_AVERAGE_NO	0x00
+#define PCF50633_ADCC1_AVERAGE_4	0x04
+#define PCF50633_ADCC1_AVERAGE_8	0x08
+#define PCF50633_ADCC1_AVERAGE_16	0x0c
+#define PCF50633_ADCC1_MUX_BATSNS_RES	0x00
+#define PCF50633_ADCC1_MUX_BATSNS_SUBTR	0x10
+#define PCF50633_ADCC1_MUX_ADCIN2_RES	0x20
+#define PCF50633_ADCC1_MUX_ADCIN2_SUBTR	0x30
+#define PCF50633_ADCC1_MUX_BATTEMP	0x60
+#define PCF50633_ADCC1_MUX_ADCIN1	0x70
+#define PCF50633_ADCC1_AVERAGE_MASK	0x0c
+#define PCF50633_ADCC1_ADCMUX_MASK	0xf0
+
+#define PCF50633_ADCC2_RATIO_NONE	0x00
+#define PCF50633_ADCC2_RATIO_BATTEMP	0x01
+#define PCF50633_ADCC2_RATIO_ADCIN1	0x02
+#define PCF50633_ADCC2_RATIO_BOTH	0x03
+#define PCF50633_ADCC2_RATIOSETTL_100US 0x04
+
+#define PCF50633_ADCC3_ACCSW_EN		0x01
+#define PCF50633_ADCC3_NTCSW_EN		0x04
+#define PCF50633_ADCC3_RES_DIV_TWO	0x10
+#define PCF50633_ADCC3_RES_DIV_THREE	0x00
+
+#define PCF50633_ADCS3_REF_NTCSW	0x00
+#define PCF50633_ADCS3_REF_ACCSW	0x10
+#define PCF50633_ADCS3_REF_2V0		0x20
+#define PCF50633_ADCS3_REF_VISA		0x30
+#define PCF50633_ADCS3_REF_2V0_2	0x70
+#define PCF50633_ADCS3_ADCRDY		0x80
+
+#define PCF50633_ADCS3_ADCDAT1L_MASK	0x03
+#define PCF50633_ADCS3_ADCDAT2L_MASK	0x0c
+#define PCF50633_ADCS3_ADCDAT2L_SHIFT	2
+#define PCF50633_ASCS3_REF_MASK		0x70
+
+extern int
+pcf50633_adc_async_read(struct pcf50633 *pcf, int mux, int avg,
+		void (*callback)(struct pcf50633 *, void *, int),
+		void *callback_param);
+extern int
+pcf50633_adc_sync_read(struct pcf50633 *pcf, int mux, int avg);
+
+#endif /* __LINUX_PCF50633_ADC_H */
-- 
GitLab


From 6a3d119b4ce29cf32bfe91eb61d46e9dbd8ce38a Mon Sep 17 00:00:00 2001
From: Balaji Rao <balajirrao@openmoko.org>
Date: Fri, 9 Jan 2009 01:49:37 +0100
Subject: [PATCH 062/492] mfd: PCF50633 gpio support

What the PCF05633 calls as a 'GPIO' is much more than the GPIO in the linux
sense and there are only 4 of them - which means, the gpiolib is not used
here.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/mfd/Kconfig               |   7 ++
 drivers/mfd/Makefile              |   3 +-
 drivers/mfd/pcf50633-gpio.c       | 118 ++++++++++++++++++++++++++++++
 include/linux/mfd/pcf50633/gpio.h |  52 +++++++++++++
 4 files changed, 179 insertions(+), 1 deletion(-)
 create mode 100644 drivers/mfd/pcf50633-gpio.c
 create mode 100644 include/linux/mfd/pcf50633/gpio.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2fa3504e165..06a2b0f7737 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -233,6 +233,13 @@ config PCF50633_ADC
 	 Say yes here if you want to include support for ADC in the
 	 NXP PCF50633 chip.
 
+config PCF50633_GPIO
+	tristate "Support for NXP PCF50633 GPIO"
+	depends on MFD_PCF50633
+	help
+	 Say yes here if you want to include support GPIO for pins on
+	 the PCF50633 chip.
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 138f9c4d3d7..3afb5192e4d 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -39,4 +39,5 @@ obj-$(CONFIG_UCB1400_CORE)	+= ucb1400_core.o
 obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
 
 obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
-obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
\ No newline at end of file
+obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
+obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
\ No newline at end of file
diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c
new file mode 100644
index 00000000000..2fa2eca5c9c
--- /dev/null
+++ b/drivers/mfd/pcf50633-gpio.c
@@ -0,0 +1,118 @@
+/* NXP PCF50633 GPIO Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/gpio.h>
+
+enum pcf50633_regulator_id {
+	PCF50633_REGULATOR_AUTO,
+	PCF50633_REGULATOR_DOWN1,
+	PCF50633_REGULATOR_DOWN2,
+	PCF50633_REGULATOR_LDO1,
+	PCF50633_REGULATOR_LDO2,
+	PCF50633_REGULATOR_LDO3,
+	PCF50633_REGULATOR_LDO4,
+	PCF50633_REGULATOR_LDO5,
+	PCF50633_REGULATOR_LDO6,
+	PCF50633_REGULATOR_HCLDO,
+	PCF50633_REGULATOR_MEMLDO,
+};
+
+#define PCF50633_REG_AUTOOUT	0x1a
+#define PCF50633_REG_DOWN1OUT	0x1e
+#define PCF50633_REG_DOWN2OUT	0x22
+#define PCF50633_REG_MEMLDOOUT	0x26
+#define PCF50633_REG_LDO1OUT	0x2d
+#define PCF50633_REG_LDO2OUT	0x2f
+#define PCF50633_REG_LDO3OUT	0x31
+#define PCF50633_REG_LDO4OUT	0x33
+#define PCF50633_REG_LDO5OUT	0x35
+#define PCF50633_REG_LDO6OUT	0x37
+#define PCF50633_REG_HCLDOOUT	0x39
+
+static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
+	[PCF50633_REGULATOR_AUTO]	= PCF50633_REG_AUTOOUT,
+	[PCF50633_REGULATOR_DOWN1]	= PCF50633_REG_DOWN1OUT,
+	[PCF50633_REGULATOR_DOWN2]	= PCF50633_REG_DOWN2OUT,
+	[PCF50633_REGULATOR_MEMLDO]	= PCF50633_REG_MEMLDOOUT,
+	[PCF50633_REGULATOR_LDO1]	= PCF50633_REG_LDO1OUT,
+	[PCF50633_REGULATOR_LDO2]	= PCF50633_REG_LDO2OUT,
+	[PCF50633_REGULATOR_LDO3]	= PCF50633_REG_LDO3OUT,
+	[PCF50633_REGULATOR_LDO4]	= PCF50633_REG_LDO4OUT,
+	[PCF50633_REGULATOR_LDO5]	= PCF50633_REG_LDO5OUT,
+	[PCF50633_REGULATOR_LDO6]	= PCF50633_REG_LDO6OUT,
+	[PCF50633_REGULATOR_HCLDO]	= PCF50633_REG_HCLDOOUT,
+};
+
+int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val)
+{
+	u8 reg;
+
+	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+
+	return pcf50633_reg_set_bit_mask(pcf, reg, 0x07, val);
+}
+EXPORT_SYMBOL_GPL(pcf50633_gpio_set);
+
+u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio)
+{
+	u8 reg, val;
+
+	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+	val = pcf50633_reg_read(pcf, reg) & 0x07;
+
+	return val;
+}
+EXPORT_SYMBOL_GPL(pcf50633_gpio_get);
+
+int pcf50633_gpio_invert_set(struct pcf50633 *pcf, int gpio, int invert)
+{
+	u8 val, reg;
+
+	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+	val = !!invert << 3;
+
+	return pcf50633_reg_set_bit_mask(pcf, reg, 1 << 3, val);
+}
+EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_set);
+
+int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio)
+{
+	u8 reg, val;
+
+	reg = gpio - PCF50633_GPIO1 + PCF50633_REG_GPIO1CFG;
+	val = pcf50633_reg_read(pcf, reg);
+
+	return val & (1 << 3);
+}
+EXPORT_SYMBOL_GPL(pcf50633_gpio_invert_get);
+
+int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
+					int gpio, int regulator, int on)
+{
+	u8 reg, val, mask;
+
+	/* the *ENA register is always one after the *OUT register */
+	reg = pcf50633_regulator_registers[regulator] + 1;
+
+	val = !!on << (gpio - PCF50633_GPIO1);
+	mask = 1 << (gpio - PCF50633_GPIO1);
+
+	return pcf50633_reg_set_bit_mask(pcf, reg, mask, val);
+}
+EXPORT_SYMBOL_GPL(pcf50633_gpio_power_supply_set);
diff --git a/include/linux/mfd/pcf50633/gpio.h b/include/linux/mfd/pcf50633/gpio.h
new file mode 100644
index 00000000000..a42b845efc5
--- /dev/null
+++ b/include/linux/mfd/pcf50633/gpio.h
@@ -0,0 +1,52 @@
+/*
+ * gpio.h -- GPIO driver for NXP PCF50633
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_GPIO_H
+#define __LINUX_MFD_PCF50633_GPIO_H
+
+#include <linux/mfd/pcf50633/core.h>
+
+#define PCF50633_GPIO1		1
+#define PCF50633_GPIO2		2
+#define PCF50633_GPIO3		3
+#define PCF50633_GPO		4
+
+#define PCF50633_REG_GPIO1CFG	0x14
+#define PCF50633_REG_GPIO2CFG	0x15
+#define PCF50633_REG_GPIO3CFG	0x16
+#define PCF50633_REG_GPOCFG 	0x17
+
+#define PCF50633_GPOCFG_GPOSEL_MASK	0x07
+
+enum pcf50633_reg_gpocfg {
+	PCF50633_GPOCFG_GPOSEL_0	= 0x00,
+	PCF50633_GPOCFG_GPOSEL_LED_NFET	= 0x01,
+	PCF50633_GPOCFG_GPOSEL_SYSxOK	= 0x02,
+	PCF50633_GPOCFG_GPOSEL_CLK32K	= 0x03,
+	PCF50633_GPOCFG_GPOSEL_ADAPUSB	= 0x04,
+	PCF50633_GPOCFG_GPOSEL_USBxOK	= 0x05,
+	PCF50633_GPOCFG_GPOSEL_ACTPH4	= 0x06,
+	PCF50633_GPOCFG_GPOSEL_1	= 0x07,
+	PCF50633_GPOCFG_GPOSEL_INVERSE	= 0x08,
+};
+
+int pcf50633_gpio_set(struct pcf50633 *pcf, int gpio, u8 val);
+u8 pcf50633_gpio_get(struct pcf50633 *pcf, int gpio);
+
+int pcf50633_gpio_invert_set(struct pcf50633 *, int gpio, int invert);
+int pcf50633_gpio_invert_get(struct pcf50633 *pcf, int gpio);
+
+int pcf50633_gpio_power_supply_set(struct pcf50633 *,
+					int gpio, int regulator, int on);
+#endif /* __LINUX_MFD_PCF50633_GPIO_H */
+
+
-- 
GitLab


From eae854b22d25a6d08524c0783a2c772e67121840 Mon Sep 17 00:00:00 2001
From: Balaji Rao <balajirrao@openmoko.org>
Date: Fri, 9 Jan 2009 01:50:51 +0100
Subject: [PATCH 063/492] rtc: PCF50633 rtc driver

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/rtc/Kconfig        |   7 +
 drivers/rtc/Makefile       |   1 +
 drivers/rtc/rtc-pcf50633.c | 344 +++++++++++++++++++++++++++++++++++++
 3 files changed, 352 insertions(+)
 create mode 100644 drivers/rtc/rtc-pcf50633.c

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 4ad831de41a..cced4d10831 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -502,6 +502,13 @@ config RTC_DRV_WM8350
 	  This driver can also be built as a module. If so, the module
 	  will be called "rtc-wm8350".
 
+config RTC_DRV_PCF50633
+	depends on MFD_PCF50633
+	tristate "NXP PCF50633 RTC"
+	help
+	  If you say yes here you get support for the RTC subsystem of the
+	  NXP PCF50633 used in embedded systems.
+
 comment "on-CPU RTC drivers"
 
 config RTC_DRV_OMAP
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 9a4340d48f2..6e28021abb9 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -74,3 +74,4 @@ obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
 obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
 obj-$(CONFIG_RTC_DRV_WM8350)	+= rtc-wm8350.o
 obj-$(CONFIG_RTC_DRV_X1205)	+= rtc-x1205.o
+obj-$(CONFIG_RTC_DRV_PCF50633)	+= rtc-pcf50633.o
diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c
new file mode 100644
index 00000000000..f4dd87e2907
--- /dev/null
+++ b/drivers/rtc/rtc-pcf50633.c
@@ -0,0 +1,344 @@
+/* NXP PCF50633 RTC Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/err.h>
+
+#include <linux/mfd/pcf50633/core.h>
+
+#define PCF50633_REG_RTCSC	0x59 /* Second */
+#define PCF50633_REG_RTCMN	0x5a /* Minute */
+#define PCF50633_REG_RTCHR	0x5b /* Hour */
+#define PCF50633_REG_RTCWD	0x5c /* Weekday */
+#define PCF50633_REG_RTCDT	0x5d /* Day */
+#define PCF50633_REG_RTCMT	0x5e /* Month */
+#define PCF50633_REG_RTCYR	0x5f /* Year */
+#define PCF50633_REG_RTCSCA	0x60 /* Alarm Second */
+#define PCF50633_REG_RTCMNA	0x61 /* Alarm Minute */
+#define PCF50633_REG_RTCHRA	0x62 /* Alarm Hour */
+#define PCF50633_REG_RTCWDA	0x63 /* Alarm Weekday */
+#define PCF50633_REG_RTCDTA	0x64 /* Alarm Day */
+#define PCF50633_REG_RTCMTA	0x65 /* Alarm Month */
+#define PCF50633_REG_RTCYRA	0x66 /* Alarm Year */
+
+enum pcf50633_time_indexes {
+	PCF50633_TI_SEC,
+	PCF50633_TI_MIN,
+	PCF50633_TI_HOUR,
+	PCF50633_TI_WKDAY,
+	PCF50633_TI_DAY,
+	PCF50633_TI_MONTH,
+	PCF50633_TI_YEAR,
+	PCF50633_TI_EXTENT /* always last */
+};
+
+struct pcf50633_time {
+	u_int8_t time[PCF50633_TI_EXTENT];
+};
+
+struct pcf50633_rtc {
+	int alarm_enabled;
+	int second_enabled;
+
+	struct pcf50633 *pcf;
+	struct rtc_device *rtc_dev;
+};
+
+static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50633_time *pcf)
+{
+	rtc->tm_sec = bcd2bin(pcf->time[PCF50633_TI_SEC]);
+	rtc->tm_min = bcd2bin(pcf->time[PCF50633_TI_MIN]);
+	rtc->tm_hour = bcd2bin(pcf->time[PCF50633_TI_HOUR]);
+	rtc->tm_wday = bcd2bin(pcf->time[PCF50633_TI_WKDAY]);
+	rtc->tm_mday = bcd2bin(pcf->time[PCF50633_TI_DAY]);
+	rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]);
+	rtc->tm_year = bcd2bin(pcf->time[PCF50633_TI_YEAR]) + 100;
+}
+
+static void rtc2pcf_time(struct pcf50633_time *pcf, struct rtc_time *rtc)
+{
+	pcf->time[PCF50633_TI_SEC] = bin2bcd(rtc->tm_sec);
+	pcf->time[PCF50633_TI_MIN] = bin2bcd(rtc->tm_min);
+	pcf->time[PCF50633_TI_HOUR] = bin2bcd(rtc->tm_hour);
+	pcf->time[PCF50633_TI_WKDAY] = bin2bcd(rtc->tm_wday);
+	pcf->time[PCF50633_TI_DAY] = bin2bcd(rtc->tm_mday);
+	pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon);
+	pcf->time[PCF50633_TI_YEAR] = bin2bcd(rtc->tm_year % 100);
+}
+
+static int
+pcf50633_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct pcf50633_rtc *rtc = dev_get_drvdata(dev);
+	int err;
+
+	if (enabled)
+		err = pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
+	else
+		err = pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	if (err < 0)
+		return err;
+
+	rtc->alarm_enabled = enabled;
+
+	return 0;
+}
+
+static int
+pcf50633_rtc_update_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct pcf50633_rtc *rtc = dev_get_drvdata(dev);
+	int err;
+
+	if (enabled)
+		err = pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_SECOND);
+	else
+		err = pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_SECOND);
+
+	if (err < 0)
+		return err;
+
+	rtc->second_enabled = enabled;
+
+	return 0;
+}
+
+static int pcf50633_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pcf50633_rtc *rtc;
+	struct pcf50633_time pcf_tm;
+	int ret;
+
+	rtc = dev_get_drvdata(dev);
+
+	ret = pcf50633_read_block(rtc->pcf, PCF50633_REG_RTCSC,
+					    PCF50633_TI_EXTENT,
+					    &pcf_tm.time[0]);
+	if (ret != PCF50633_TI_EXTENT) {
+		dev_err(dev, "Failed to read time\n");
+		return -EIO;
+	}
+
+	dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n",
+		pcf_tm.time[PCF50633_TI_DAY],
+		pcf_tm.time[PCF50633_TI_MONTH],
+		pcf_tm.time[PCF50633_TI_YEAR],
+		pcf_tm.time[PCF50633_TI_HOUR],
+		pcf_tm.time[PCF50633_TI_MIN],
+		pcf_tm.time[PCF50633_TI_SEC]);
+
+	pcf2rtc_time(tm, &pcf_tm);
+
+	dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n",
+		tm->tm_mday, tm->tm_mon, tm->tm_year,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	return rtc_valid_tm(tm);
+}
+
+static int pcf50633_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct pcf50633_rtc *rtc;
+	struct pcf50633_time pcf_tm;
+	int second_masked, alarm_masked, ret = 0;
+
+	rtc = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "RTC_TIME: %u.%u.%u %u:%u:%u\n",
+		tm->tm_mday, tm->tm_mon, tm->tm_year,
+		tm->tm_hour, tm->tm_min, tm->tm_sec);
+
+	rtc2pcf_time(&pcf_tm, tm);
+
+	dev_dbg(dev, "PCF_TIME: %02x.%02x.%02x %02x:%02x:%02x\n",
+		pcf_tm.time[PCF50633_TI_DAY],
+		pcf_tm.time[PCF50633_TI_MONTH],
+		pcf_tm.time[PCF50633_TI_YEAR],
+		pcf_tm.time[PCF50633_TI_HOUR],
+		pcf_tm.time[PCF50633_TI_MIN],
+		pcf_tm.time[PCF50633_TI_SEC]);
+
+
+	second_masked = pcf50633_irq_mask_get(rtc->pcf, PCF50633_IRQ_SECOND);
+	alarm_masked = pcf50633_irq_mask_get(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	if (!second_masked)
+		pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_SECOND);
+	if (!alarm_masked)
+		pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	/* Returns 0 on success */
+	ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSC,
+					     PCF50633_TI_EXTENT,
+					     &pcf_tm.time[0]);
+
+	if (!second_masked)
+		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_SECOND);
+	if (!alarm_masked)
+		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	return ret;
+}
+
+static int pcf50633_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pcf50633_rtc *rtc;
+	struct pcf50633_time pcf_tm;
+	int ret = 0;
+
+	rtc = dev_get_drvdata(dev);
+
+	alrm->enabled = rtc->alarm_enabled;
+
+	ret = pcf50633_read_block(rtc->pcf, PCF50633_REG_RTCSCA,
+				PCF50633_TI_EXTENT, &pcf_tm.time[0]);
+	if (ret != PCF50633_TI_EXTENT) {
+		dev_err(dev, "Failed to read time\n");
+		return -EIO;
+	}
+
+	pcf2rtc_time(&alrm->time, &pcf_tm);
+
+	return rtc_valid_tm(&alrm->time);
+}
+
+static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct pcf50633_rtc *rtc;
+	struct pcf50633_time pcf_tm;
+	int alarm_masked, ret = 0;
+
+	rtc = dev_get_drvdata(dev);
+
+	rtc2pcf_time(&pcf_tm, &alrm->time);
+
+	/* do like mktime does and ignore tm_wday */
+	pcf_tm.time[PCF50633_TI_WKDAY] = 7;
+
+	alarm_masked = pcf50633_irq_mask_get(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	/* disable alarm interrupt */
+	if (!alarm_masked)
+		pcf50633_irq_mask(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	/* Returns 0 on success */
+	ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA,
+				PCF50633_TI_EXTENT, &pcf_tm.time[0]);
+
+	if (!alarm_masked)
+		pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
+
+	return ret;
+}
+
+static struct rtc_class_ops pcf50633_rtc_ops = {
+	.read_time		= pcf50633_rtc_read_time,
+	.set_time		= pcf50633_rtc_set_time,
+	.read_alarm		= pcf50633_rtc_read_alarm,
+	.set_alarm		= pcf50633_rtc_set_alarm,
+	.alarm_irq_enable 	= pcf50633_rtc_alarm_irq_enable,
+	.update_irq_enable 	= pcf50633_rtc_update_irq_enable,
+};
+
+static void pcf50633_rtc_irq(int irq, void *data)
+{
+	struct pcf50633_rtc *rtc = data;
+
+	switch (irq) {
+	case PCF50633_IRQ_ALARM:
+		rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+		break;
+	case PCF50633_IRQ_SECOND:
+		rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
+		break;
+	}
+}
+
+static int __devinit pcf50633_rtc_probe(struct platform_device *pdev)
+{
+	struct pcf50633_subdev_pdata *pdata;
+	struct pcf50633_rtc *rtc;
+
+
+	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
+	if (!rtc)
+		return -ENOMEM;
+
+	pdata = pdev->dev.platform_data;
+	rtc->pcf = pdata->pcf;
+	platform_set_drvdata(pdev, rtc);
+	rtc->rtc_dev = rtc_device_register("pcf50633-rtc", &pdev->dev,
+				&pcf50633_rtc_ops, THIS_MODULE);
+
+	if (IS_ERR(rtc->rtc_dev)) {
+		kfree(rtc);
+		return PTR_ERR(rtc->rtc_dev);
+	}
+
+	pcf50633_register_irq(rtc->pcf, PCF50633_IRQ_ALARM,
+					pcf50633_rtc_irq, rtc);
+	pcf50633_register_irq(rtc->pcf, PCF50633_IRQ_SECOND,
+					pcf50633_rtc_irq, rtc);
+
+	return 0;
+}
+
+static int __devexit pcf50633_rtc_remove(struct platform_device *pdev)
+{
+	struct pcf50633_rtc *rtc;
+
+	rtc = platform_get_drvdata(pdev);
+
+	pcf50633_free_irq(rtc->pcf, PCF50633_IRQ_ALARM);
+	pcf50633_free_irq(rtc->pcf, PCF50633_IRQ_SECOND);
+
+	rtc_device_unregister(rtc->rtc_dev);
+	kfree(rtc);
+
+	return 0;
+}
+
+static struct platform_driver pcf50633_rtc_driver = {
+	.driver = {
+		.name = "pcf50633-rtc",
+	},
+	.probe = pcf50633_rtc_probe,
+	.remove = __devexit_p(pcf50633_rtc_remove),
+};
+
+static int __init pcf50633_rtc_init(void)
+{
+	return platform_driver_register(&pcf50633_rtc_driver);
+}
+module_init(pcf50633_rtc_init);
+
+static void __exit pcf50633_rtc_exit(void)
+{
+	platform_driver_unregister(&pcf50633_rtc_driver);
+}
+module_exit(pcf50633_rtc_exit);
+
+MODULE_DESCRIPTION("PCF50633 RTC driver");
+MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
+MODULE_LICENSE("GPL");
+
-- 
GitLab


From f5714dc97d63cc0dd1219bd0eb2e1f8df1e4347a Mon Sep 17 00:00:00 2001
From: Balaji Rao <balajirrao@openmoko.org>
Date: Fri, 9 Jan 2009 01:50:55 +0100
Subject: [PATCH 064/492] power_supply: PCF50633 battery charger driver

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/power/Kconfig            |   6 +
 drivers/power/Makefile           |   1 +
 drivers/power/pcf50633-charger.c | 358 +++++++++++++++++++++++++++++++
 include/linux/mfd/pcf50633/mbc.h | 134 ++++++++++++
 4 files changed, 499 insertions(+)
 create mode 100644 drivers/power/pcf50633-charger.c
 create mode 100644 include/linux/mfd/pcf50633/mbc.h

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 668472405a5..33da1127992 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -82,4 +82,10 @@ config BATTERY_DA9030
 	  Say Y here to enable support for batteries charger integrated into
 	  DA9030 PMIC.
 
+config CHARGER_PCF50633
+	tristate "NXP PCF50633 MBC"
+	depends on MFD_PCF50633
+	help
+	 Say Y to include support for NXP PCF50633 Main Battery Charger.
+
 endif # POWER_SUPPLY
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index eebb15505a4..2fcf41d13e5 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -25,3 +25,4 @@ obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
 obj-$(CONFIG_BATTERY_WM97XX)	+= wm97xx_battery.o
 obj-$(CONFIG_BATTERY_BQ27x00)	+= bq27x00_battery.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
+obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
\ No newline at end of file
diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
new file mode 100644
index 00000000000..e988ec130fc
--- /dev/null
+++ b/drivers/power/pcf50633-charger.c
@@ -0,0 +1,358 @@
+/* NXP PCF50633 Main Battery Charger Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/mbc.h>
+
+struct pcf50633_mbc {
+	struct pcf50633 *pcf;
+
+	int adapter_active;
+	int adapter_online;
+	int usb_active;
+	int usb_online;
+
+	struct power_supply usb;
+	struct power_supply adapter;
+};
+
+int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
+{
+	struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
+	int ret = 0;
+	u8 bits;
+
+	if (ma >= 1000)
+		bits = PCF50633_MBCC7_USB_1000mA;
+	else if (ma >= 500)
+		bits = PCF50633_MBCC7_USB_500mA;
+	else if (ma >= 100)
+		bits = PCF50633_MBCC7_USB_100mA;
+	else
+		bits = PCF50633_MBCC7_USB_SUSPEND;
+
+	ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
+					PCF50633_MBCC7_USB_MASK, bits);
+	if (ret)
+		dev_err(pcf->dev, "error setting usb curlim to %d mA\n", ma);
+	else
+		dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
+
+	power_supply_changed(&mbc->usb);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_usb_curlim_set);
+
+int pcf50633_mbc_get_status(struct pcf50633 *pcf)
+{
+	struct pcf50633_mbc *mbc  = platform_get_drvdata(pcf->mbc_pdev);
+	int status = 0;
+
+	if (mbc->usb_online)
+		status |= PCF50633_MBC_USB_ONLINE;
+	if (mbc->usb_active)
+		status |= PCF50633_MBC_USB_ACTIVE;
+	if (mbc->adapter_online)
+		status |= PCF50633_MBC_ADAPTER_ONLINE;
+	if (mbc->adapter_active)
+		status |= PCF50633_MBC_ADAPTER_ACTIVE;
+
+	return status;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status);
+
+void pcf50633_mbc_set_status(struct pcf50633 *pcf, int what, int status)
+{
+	struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
+
+	if (what & PCF50633_MBC_USB_ONLINE)
+		mbc->usb_online = !!status;
+	if (what & PCF50633_MBC_USB_ACTIVE)
+		mbc->usb_active = !!status;
+	if (what & PCF50633_MBC_ADAPTER_ONLINE)
+		mbc->adapter_online = !!status;
+	if (what & PCF50633_MBC_ADAPTER_ACTIVE)
+		mbc->adapter_active = !!status;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_set_status);
+
+static ssize_t
+show_chgmode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+
+	u8 mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
+	u8 chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
+
+	return sprintf(buf, "%d\n", chgmod);
+}
+static DEVICE_ATTR(chgmode, S_IRUGO, show_chgmode, NULL);
+
+static ssize_t
+show_usblim(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+	u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+						PCF50633_MBCC7_USB_MASK;
+	unsigned int ma;
+
+	if (usblim == PCF50633_MBCC7_USB_1000mA)
+		ma = 1000;
+	else if (usblim == PCF50633_MBCC7_USB_500mA)
+		ma = 500;
+	else if (usblim == PCF50633_MBCC7_USB_100mA)
+		ma = 100;
+	else
+		ma = 0;
+
+	return sprintf(buf, "%u\n", ma);
+}
+
+static ssize_t set_usblim(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+	unsigned long ma;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &ma);
+	if (ret)
+		return -EINVAL;
+
+	pcf50633_mbc_usb_curlim_set(mbc->pcf, ma);
+
+	return count;
+}
+
+static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
+
+static struct attribute *pcf50633_mbc_sysfs_entries[] = {
+	&dev_attr_chgmode.attr,
+	&dev_attr_usb_curlim.attr,
+	NULL,
+};
+
+static struct attribute_group mbc_attr_group = {
+	.name	= NULL,			/* put in device directory */
+	.attrs	= pcf50633_mbc_sysfs_entries,
+};
+
+static void
+pcf50633_mbc_irq_handler(int irq, void *data)
+{
+	struct pcf50633_mbc *mbc = data;
+
+	/* USB */
+	if (irq == PCF50633_IRQ_USBINS) {
+		mbc->usb_online = 1;
+	} else if (irq == PCF50633_IRQ_USBREM) {
+		mbc->usb_online = 0;
+		mbc->usb_active = 0;
+		pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);
+	}
+
+	/* Adapter */
+	if (irq == PCF50633_IRQ_ADPINS) {
+		mbc->adapter_online = 1;
+		mbc->adapter_active = 1;
+	} else if (irq == PCF50633_IRQ_ADPREM) {
+		mbc->adapter_online = 0;
+		mbc->adapter_active = 0;
+	}
+
+	if (irq == PCF50633_IRQ_BATFULL) {
+		mbc->usb_active = 0;
+		mbc->adapter_active = 0;
+	}
+
+	power_supply_changed(&mbc->usb);
+	power_supply_changed(&mbc->adapter);
+
+	if (mbc->pcf->pdata->mbc_event_callback)
+		mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
+}
+
+static int adapter_get_property(struct power_supply *psy,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval =  mbc->adapter_online;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int usb_get_property(struct power_supply *psy,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb);
+	int ret = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = mbc->usb_online;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static enum power_supply_property power_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const u8 mbc_irq_handlers[] = {
+	PCF50633_IRQ_ADPINS,
+	PCF50633_IRQ_ADPREM,
+	PCF50633_IRQ_USBINS,
+	PCF50633_IRQ_USBREM,
+	PCF50633_IRQ_BATFULL,
+	PCF50633_IRQ_CHGHALT,
+	PCF50633_IRQ_THLIMON,
+	PCF50633_IRQ_THLIMOFF,
+	PCF50633_IRQ_USBLIMON,
+	PCF50633_IRQ_USBLIMOFF,
+	PCF50633_IRQ_LOWSYS,
+	PCF50633_IRQ_LOWBAT,
+};
+
+static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
+{
+	struct pcf50633_mbc *mbc;
+	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
+	int ret;
+	int i;
+	u8 mbcs1;
+
+	mbc = kzalloc(sizeof(*mbc), GFP_KERNEL);
+	if (!mbc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, mbc);
+	mbc->pcf = pdata->pcf;
+
+	/* Set up IRQ handlers */
+	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
+		pcf50633_register_irq(mbc->pcf, mbc_irq_handlers[i],
+					pcf50633_mbc_irq_handler, mbc);
+
+	/* Create power supplies */
+	mbc->adapter.name		= "adapter";
+	mbc->adapter.type		= POWER_SUPPLY_TYPE_MAINS;
+	mbc->adapter.properties		= power_props;
+	mbc->adapter.num_properties	= ARRAY_SIZE(power_props);
+	mbc->adapter.get_property	= &adapter_get_property;
+	mbc->adapter.supplied_to	= mbc->pcf->pdata->batteries;
+	mbc->adapter.num_supplicants	= mbc->pcf->pdata->num_batteries;
+
+	mbc->usb.name			= "usb";
+	mbc->usb.type			= POWER_SUPPLY_TYPE_USB;
+	mbc->usb.properties		= power_props;
+	mbc->usb.num_properties		= ARRAY_SIZE(power_props);
+	mbc->usb.get_property		= usb_get_property;
+	mbc->usb.supplied_to		= mbc->pcf->pdata->batteries;
+	mbc->usb.num_supplicants	= mbc->pcf->pdata->num_batteries;
+
+	ret = power_supply_register(&pdev->dev, &mbc->adapter);
+	if (ret) {
+		dev_err(mbc->pcf->dev, "failed to register adapter\n");
+		kfree(mbc);
+		return ret;
+	}
+
+	ret = power_supply_register(&pdev->dev, &mbc->usb);
+	if (ret) {
+		dev_err(mbc->pcf->dev, "failed to register usb\n");
+		power_supply_unregister(&mbc->adapter);
+		kfree(mbc);
+		return ret;
+	}
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
+	if (ret)
+		dev_err(mbc->pcf->dev, "failed to create sysfs entries\n");
+
+	mbcs1 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS1);
+	if (mbcs1 & PCF50633_MBCS1_USBPRES)
+		pcf50633_mbc_irq_handler(PCF50633_IRQ_USBINS, mbc);
+	if (mbcs1 & PCF50633_MBCS1_ADAPTPRES)
+		pcf50633_mbc_irq_handler(PCF50633_IRQ_ADPINS, mbc);
+
+	return 0;
+}
+
+static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
+{
+	struct pcf50633_mbc *mbc = platform_get_drvdata(pdev);
+	int i;
+
+	/* Remove IRQ handlers */
+	for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
+		pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]);
+
+	power_supply_unregister(&mbc->usb);
+	power_supply_unregister(&mbc->adapter);
+
+	kfree(mbc);
+
+	return 0;
+}
+
+static struct platform_driver pcf50633_mbc_driver = {
+	.driver = {
+		.name = "pcf50633-mbc",
+	},
+	.probe = pcf50633_mbc_probe,
+	.remove = __devexit_p(pcf50633_mbc_remove),
+};
+
+static int __init pcf50633_mbc_init(void)
+{
+	return platform_driver_register(&pcf50633_mbc_driver);
+}
+module_init(pcf50633_mbc_init);
+
+static void __exit pcf50633_mbc_exit(void)
+{
+	platform_driver_unregister(&pcf50633_mbc_driver);
+}
+module_exit(pcf50633_mbc_exit);
+
+MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
+MODULE_DESCRIPTION("PCF50633 mbc driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-mbc");
diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h
new file mode 100644
index 00000000000..6e17619b773
--- /dev/null
+++ b/include/linux/mfd/pcf50633/mbc.h
@@ -0,0 +1,134 @@
+/*
+ * mbc.h  -- Driver for NXP PCF50633 Main Battery Charger
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __LINUX_MFD_PCF50633_MBC_H
+#define __LINUX_MFD_PCF50633_MBC_H
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/platform_device.h>
+
+#define PCF50633_REG_MBCC1	0x43
+#define PCF50633_REG_MBCC2	0x44
+#define PCF50633_REG_MBCC3	0x45
+#define PCF50633_REG_MBCC4	0x46
+#define PCF50633_REG_MBCC5	0x47
+#define PCF50633_REG_MBCC6	0x48
+#define PCF50633_REG_MBCC7	0x49
+#define PCF50633_REG_MBCC8	0x4a
+#define PCF50633_REG_MBCS1	0x4b
+#define PCF50633_REG_MBCS2	0x4c
+#define PCF50633_REG_MBCS3	0x4d
+
+enum pcf50633_reg_mbcc1 {
+	PCF50633_MBCC1_CHGENA		= 0x01,	/* Charger enable */
+	PCF50633_MBCC1_AUTOSTOP		= 0x02,
+	PCF50633_MBCC1_AUTORES		= 0x04, /* automatic resume */
+	PCF50633_MBCC1_RESUME		= 0x08, /* explicit resume cmd */
+	PCF50633_MBCC1_RESTART		= 0x10, /* restart charging */
+	PCF50633_MBCC1_PREWDTIME_60M	= 0x20,	/* max. precharging time */
+	PCF50633_MBCC1_WDTIME_1H	= 0x00,
+	PCF50633_MBCC1_WDTIME_2H	= 0x40,
+	PCF50633_MBCC1_WDTIME_4H	= 0x80,
+	PCF50633_MBCC1_WDTIME_6H	= 0xc0,
+};
+#define PCF50633_MBCC1_WDTIME_MASK	  0xc0
+
+enum pcf50633_reg_mbcc2 {
+	PCF50633_MBCC2_VBATCOND_2V7	= 0x00,
+	PCF50633_MBCC2_VBATCOND_2V85	= 0x01,
+	PCF50633_MBCC2_VBATCOND_3V0	= 0x02,
+	PCF50633_MBCC2_VBATCOND_3V15	= 0x03,
+	PCF50633_MBCC2_VMAX_4V		= 0x00,
+	PCF50633_MBCC2_VMAX_4V20	= 0x28,
+	PCF50633_MBCC2_VRESDEBTIME_64S	= 0x80,	/* debounce time (32/64sec) */
+};
+
+enum pcf50633_reg_mbcc7 {
+	PCF50633_MBCC7_USB_100mA	= 0x00,
+	PCF50633_MBCC7_USB_500mA	= 0x01,
+	PCF50633_MBCC7_USB_1000mA	= 0x02,
+	PCF50633_MBCC7_USB_SUSPEND	= 0x03,
+	PCF50633_MBCC7_BATTEMP_EN	= 0x04,
+	PCF50633_MBCC7_BATSYSIMAX_1A6	= 0x00,
+	PCF50633_MBCC7_BATSYSIMAX_1A8	= 0x40,
+	PCF50633_MBCC7_BATSYSIMAX_2A0	= 0x80,
+	PCF50633_MBCC7_BATSYSIMAX_2A2	= 0xc0,
+};
+#define PCF50633_MBCC7_USB_MASK 0x03
+
+enum pcf50633_reg_mbcc8 {
+	PCF50633_MBCC8_USBENASUS	= 0x10,
+};
+
+enum pcf50633_reg_mbcs1 {
+	PCF50633_MBCS1_USBPRES		= 0x01,
+	PCF50633_MBCS1_USBOK		= 0x02,
+	PCF50633_MBCS1_ADAPTPRES	= 0x04,
+	PCF50633_MBCS1_ADAPTOK		= 0x08,
+	PCF50633_MBCS1_TBAT_OK		= 0x00,
+	PCF50633_MBCS1_TBAT_ABOVE	= 0x10,
+	PCF50633_MBCS1_TBAT_BELOW	= 0x20,
+	PCF50633_MBCS1_TBAT_UNDEF	= 0x30,
+	PCF50633_MBCS1_PREWDTEXP	= 0x40,
+	PCF50633_MBCS1_WDTEXP		= 0x80,
+};
+
+enum pcf50633_reg_mbcs2_mbcmod {
+	PCF50633_MBCS2_MBC_PLAY		= 0x00,
+	PCF50633_MBCS2_MBC_USB_PRE	= 0x01,
+	PCF50633_MBCS2_MBC_USB_PRE_WAIT	= 0x02,
+	PCF50633_MBCS2_MBC_USB_FAST	= 0x03,
+	PCF50633_MBCS2_MBC_USB_FAST_WAIT = 0x04,
+	PCF50633_MBCS2_MBC_USB_SUSPEND	= 0x05,
+	PCF50633_MBCS2_MBC_ADP_PRE	= 0x06,
+	PCF50633_MBCS2_MBC_ADP_PRE_WAIT	= 0x07,
+	PCF50633_MBCS2_MBC_ADP_FAST	= 0x08,
+	PCF50633_MBCS2_MBC_ADP_FAST_WAIT = 0x09,
+	PCF50633_MBCS2_MBC_BAT_FULL	= 0x0a,
+	PCF50633_MBCS2_MBC_HALT		= 0x0b,
+};
+#define PCF50633_MBCS2_MBC_MASK		0x0f
+enum pcf50633_reg_mbcs2_chgstat {
+	PCF50633_MBCS2_CHGS_NONE	= 0x00,
+	PCF50633_MBCS2_CHGS_ADAPTER	= 0x10,
+	PCF50633_MBCS2_CHGS_USB		= 0x20,
+	PCF50633_MBCS2_CHGS_BOTH	= 0x30,
+};
+#define PCF50633_MBCS2_RESSTAT_AUTO	0x40
+
+enum pcf50633_reg_mbcs3 {
+	PCF50633_MBCS3_USBLIM_PLAY	= 0x01,
+	PCF50633_MBCS3_USBLIM_CGH	= 0x02,
+	PCF50633_MBCS3_TLIM_PLAY	= 0x04,
+	PCF50633_MBCS3_TLIM_CHG		= 0x08,
+	PCF50633_MBCS3_ILIM		= 0x10,	/* 1: Ibat > Icutoff */
+	PCF50633_MBCS3_VLIM		= 0x20,	/* 1: Vbat == Vmax */
+	PCF50633_MBCS3_VBATSTAT		= 0x40,	/* 1: Vbat > Vbatcond */
+	PCF50633_MBCS3_VRES		= 0x80, /* 1: Vbat > Vth(RES) */
+};
+
+#define PCF50633_MBCC2_VBATCOND_MASK	  0x03
+#define PCF50633_MBCC2_VMAX_MASK	  0x3c
+
+/* Charger status */
+#define PCF50633_MBC_USB_ONLINE		0x01
+#define PCF50633_MBC_USB_ACTIVE		0x02
+#define PCF50633_MBC_ADAPTER_ONLINE	0x04
+#define PCF50633_MBC_ADAPTER_ACTIVE	0x08
+
+int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma);
+
+int pcf50633_mbc_get_status(struct pcf50633 *);
+void pcf50633_mbc_set_status(struct pcf50633 *, int what, int status);
+
+#endif
+
-- 
GitLab


From 1851b06ac40c57fe4efe7ddefc3c04dab4f99e67 Mon Sep 17 00:00:00 2001
From: Balaji Rao <balajirrao@openmoko.org>
Date: Fri, 9 Jan 2009 01:50:58 +0100
Subject: [PATCH 065/492] input: PCF50633 input driver

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/input/misc/Kconfig          |   7 ++
 drivers/input/misc/Makefile         |   1 +
 drivers/input/misc/pcf50633-input.c | 132 ++++++++++++++++++++++++++++
 3 files changed, 140 insertions(+)
 create mode 100644 drivers/input/misc/pcf50633-input.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 199055db508..67e5553f699 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -220,4 +220,11 @@ config HP_SDC_RTC
 	  Say Y here if you want to support the built-in real time clock
 	  of the HP SDC controller.
 
+config INPUT_PCF50633_PMU
+	tristate "PCF50633 PMU events"
+	depends on MFD_PCF50633
+	help
+	 Say Y to include support for delivering  PMU events via  input
+	 layer on NXP PCF50633.
+
 endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index d7db2aeb8a9..bb62e6efacf 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
 obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
+obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
diff --git a/drivers/input/misc/pcf50633-input.c b/drivers/input/misc/pcf50633-input.c
new file mode 100644
index 00000000000..039dcb00ebd
--- /dev/null
+++ b/drivers/input/misc/pcf50633-input.c
@@ -0,0 +1,132 @@
+/* NXP PCF50633 Input Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+
+#include <linux/mfd/pcf50633/core.h>
+
+#define PCF50633_OOCSTAT_ONKEY	0x01
+#define PCF50633_REG_OOCSTAT	0x12
+#define PCF50633_REG_OOCMODE	0x10
+
+struct pcf50633_input {
+	struct pcf50633 *pcf;
+	struct input_dev *input_dev;
+};
+
+static void
+pcf50633_input_irq(int irq, void *data)
+{
+	struct pcf50633_input *input;
+	int onkey_released;
+
+	input = data;
+
+	/* We report only one event depending on the key press status */
+	onkey_released = pcf50633_reg_read(input->pcf, PCF50633_REG_OOCSTAT)
+						& PCF50633_OOCSTAT_ONKEY;
+
+	if (irq == PCF50633_IRQ_ONKEYF && !onkey_released)
+		input_report_key(input->input_dev, KEY_POWER, 1);
+	else if (irq == PCF50633_IRQ_ONKEYR && onkey_released)
+		input_report_key(input->input_dev, KEY_POWER, 0);
+
+	input_sync(input->input_dev);
+}
+
+static int __devinit pcf50633_input_probe(struct platform_device *pdev)
+{
+	struct pcf50633_input *input;
+	struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
+	struct input_dev *input_dev;
+	int ret;
+
+
+	input = kzalloc(sizeof(*input), GFP_KERNEL);
+	if (!input)
+		return -ENOMEM;
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		kfree(input);
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, input);
+	input->pcf = pdata->pcf;
+	input->input_dev = input_dev;
+
+	input_dev->name = "PCF50633 PMU events";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_PWR);
+	set_bit(KEY_POWER, input_dev->keybit);
+
+	ret = input_register_device(input_dev);
+	if (ret) {
+		input_free_device(input_dev);
+		kfree(input);
+		return ret;
+	}
+	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ONKEYR,
+				pcf50633_input_irq, input);
+	pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ONKEYF,
+				pcf50633_input_irq, input);
+
+	return 0;
+}
+
+static int __devexit pcf50633_input_remove(struct platform_device *pdev)
+{
+	struct pcf50633_input *input  = platform_get_drvdata(pdev);
+
+	pcf50633_free_irq(input->pcf, PCF50633_IRQ_ONKEYR);
+	pcf50633_free_irq(input->pcf, PCF50633_IRQ_ONKEYF);
+
+	input_unregister_device(input->input_dev);
+	kfree(input);
+
+	return 0;
+}
+
+static struct platform_driver pcf50633_input_driver = {
+	.driver = {
+		.name = "pcf50633-input",
+	},
+	.probe = pcf50633_input_probe,
+	.remove = __devexit_p(pcf50633_input_remove),
+};
+
+static int __init pcf50633_input_init(void)
+{
+	return platform_driver_register(&pcf50633_input_driver);
+}
+module_init(pcf50633_input_init);
+
+static void __exit pcf50633_input_exit(void)
+{
+	platform_driver_unregister(&pcf50633_input_driver);
+}
+module_exit(pcf50633_input_exit);
+
+MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
+MODULE_DESCRIPTION("PCF50633 input driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-input");
-- 
GitLab


From 5ec271e745350c7df6a6ebca24b43cb7a10bfa4a Mon Sep 17 00:00:00 2001
From: Balaji Rao <balajirrao@openmoko.org>
Date: Fri, 9 Jan 2009 01:51:01 +0100
Subject: [PATCH 066/492] regulator: PCF50633 pmic driver

Changes from V1:
	- Removed support for suspend_enable & suspend_disable functions.

Signed-off-by: Balaji Rao <balajirrao@openmoko.org>
Cc: Andy Green <andy@openmoko.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/regulator/Kconfig              |   7 +
 drivers/regulator/Makefile             |   1 +
 drivers/regulator/pcf50633-regulator.c | 329 +++++++++++++++++++++++++
 include/linux/mfd/pcf50633/pmic.h      |  67 +++++
 4 files changed, 404 insertions(+)
 create mode 100644 drivers/regulator/pcf50633-regulator.c
 create mode 100644 include/linux/mfd/pcf50633/pmic.h

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 39360e2a454..e7e0cf102d6 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -73,4 +73,11 @@ config REGULATOR_DA903X
 	  Say y here to support the BUCKs and LDOs regulators found on
 	  Dialog Semiconductor DA9030/DA9034 PMIC.
 
+config REGULATOR_PCF50633
+	tristate "PCF50633 regulator driver"
+        depends on MFD_PCF50633
+	help
+	 Say Y here to support the voltage regulators and convertors
+	 on PCF50633
+
 endif
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 254d40c02ee..61b30c6ddec 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -11,5 +11,6 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
 obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
 obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
+obj-$(CONFIG_REGULATOR_PCF50633) += pcf50633-regulator.o
 
 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
new file mode 100644
index 00000000000..4cc85ec6e12
--- /dev/null
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -0,0 +1,329 @@
+/* NXP PCF50633 PMIC Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte and Andy Green and Werner Almesberger
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#define PCF50633_REGULATOR(_name, _id) 		\
+	{					\
+		.name = _name, 			\
+		.id = _id,			\
+		.ops = &pcf50633_regulator_ops,	\
+		.type = REGULATOR_VOLTAGE, 	\
+		.owner = THIS_MODULE, 		\
+	}
+
+static const u8 pcf50633_regulator_registers[PCF50633_NUM_REGULATORS] = {
+	[PCF50633_REGULATOR_AUTO]	= PCF50633_REG_AUTOOUT,
+	[PCF50633_REGULATOR_DOWN1]	= PCF50633_REG_DOWN1OUT,
+	[PCF50633_REGULATOR_DOWN2]	= PCF50633_REG_DOWN2OUT,
+	[PCF50633_REGULATOR_MEMLDO]	= PCF50633_REG_MEMLDOOUT,
+	[PCF50633_REGULATOR_LDO1]	= PCF50633_REG_LDO1OUT,
+	[PCF50633_REGULATOR_LDO2]	= PCF50633_REG_LDO2OUT,
+	[PCF50633_REGULATOR_LDO3]	= PCF50633_REG_LDO3OUT,
+	[PCF50633_REGULATOR_LDO4]	= PCF50633_REG_LDO4OUT,
+	[PCF50633_REGULATOR_LDO5]	= PCF50633_REG_LDO5OUT,
+	[PCF50633_REGULATOR_LDO6]	= PCF50633_REG_LDO6OUT,
+	[PCF50633_REGULATOR_HCLDO]	= PCF50633_REG_HCLDOOUT,
+};
+
+/* Bits from voltage value */
+static u8 auto_voltage_bits(unsigned int millivolts)
+{
+	if (millivolts < 1800)
+		return 0;
+	if (millivolts > 3800)
+		return 0xff;
+
+	millivolts -= 625;
+
+	return millivolts / 25;
+}
+
+static u8 down_voltage_bits(unsigned int millivolts)
+{
+	if (millivolts < 625)
+		return 0;
+	else if (millivolts > 3000)
+		return 0xff;
+
+	millivolts -= 625;
+
+	return millivolts / 25;
+}
+
+static u8 ldo_voltage_bits(unsigned int millivolts)
+{
+	if (millivolts < 900)
+		return 0;
+	else if (millivolts > 3600)
+		return 0x1f;
+
+	millivolts -= 900;
+	return millivolts / 100;
+}
+
+/* Obtain voltage value from bits */
+static unsigned int auto_voltage_value(u8 bits)
+{
+	if (bits < 0x2f)
+		return 0;
+
+	return 625 + (bits * 25);
+}
+
+
+static unsigned int down_voltage_value(u8 bits)
+{
+	return 625 + (bits * 25);
+}
+
+
+static unsigned int ldo_voltage_value(u8 bits)
+{
+	bits &= 0x1f;
+
+	return 900 + (bits * 100);
+}
+
+static int pcf50633_regulator_set_voltage(struct regulator_dev *rdev,
+						int min_uV, int max_uV)
+{
+	struct pcf50633 *pcf;
+	int regulator_id, millivolts;
+	u8 volt_bits, regnr;
+
+	pcf = rdev_get_drvdata(rdev);
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= PCF50633_NUM_REGULATORS)
+		return -EINVAL;
+
+	millivolts = min_uV / 1000;
+
+	regnr = pcf50633_regulator_registers[regulator_id];
+
+	switch (regulator_id) {
+	case PCF50633_REGULATOR_AUTO:
+		volt_bits = auto_voltage_bits(millivolts);
+		break;
+	case PCF50633_REGULATOR_DOWN1:
+		volt_bits = down_voltage_bits(millivolts);
+		break;
+	case PCF50633_REGULATOR_DOWN2:
+		volt_bits = down_voltage_bits(millivolts);
+		break;
+	case PCF50633_REGULATOR_LDO1:
+	case PCF50633_REGULATOR_LDO2:
+	case PCF50633_REGULATOR_LDO3:
+	case PCF50633_REGULATOR_LDO4:
+	case PCF50633_REGULATOR_LDO5:
+	case PCF50633_REGULATOR_LDO6:
+	case PCF50633_REGULATOR_HCLDO:
+		volt_bits = ldo_voltage_bits(millivolts);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return pcf50633_reg_write(pcf, regnr, volt_bits);
+}
+
+static int pcf50633_regulator_get_voltage(struct regulator_dev *rdev)
+{
+	struct pcf50633 *pcf;
+	int regulator_id, millivolts, volt_bits;
+	u8 regnr;
+
+	pcf = rdev_get_drvdata(rdev);;
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= PCF50633_NUM_REGULATORS)
+		return -EINVAL;
+
+	regnr = pcf50633_regulator_registers[regulator_id];
+
+	volt_bits = pcf50633_reg_read(pcf, regnr);
+	if (volt_bits < 0)
+		return -1;
+
+	switch (regulator_id) {
+	case PCF50633_REGULATOR_AUTO:
+		millivolts = auto_voltage_value(volt_bits);
+		break;
+	case PCF50633_REGULATOR_DOWN1:
+		millivolts = down_voltage_value(volt_bits);
+		break;
+	case PCF50633_REGULATOR_DOWN2:
+		millivolts = down_voltage_value(volt_bits);
+		break;
+	case PCF50633_REGULATOR_LDO1:
+	case PCF50633_REGULATOR_LDO2:
+	case PCF50633_REGULATOR_LDO3:
+	case PCF50633_REGULATOR_LDO4:
+	case PCF50633_REGULATOR_LDO5:
+	case PCF50633_REGULATOR_LDO6:
+	case PCF50633_REGULATOR_HCLDO:
+		millivolts = ldo_voltage_value(volt_bits);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return millivolts * 1000;
+}
+
+static int pcf50633_regulator_enable(struct regulator_dev *rdev)
+{
+	struct pcf50633 *pcf = rdev_get_drvdata(rdev);
+	int regulator_id;
+	u8 regnr;
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= PCF50633_NUM_REGULATORS)
+		return -EINVAL;
+
+	/* The *ENA register is always one after the *OUT register */
+	regnr = pcf50633_regulator_registers[regulator_id] + 1;
+
+	return pcf50633_reg_set_bit_mask(pcf, regnr, PCF50633_REGULATOR_ON,
+						       PCF50633_REGULATOR_ON);
+}
+
+static int pcf50633_regulator_disable(struct regulator_dev *rdev)
+{
+	struct pcf50633 *pcf = rdev_get_drvdata(rdev);
+	int regulator_id;
+	u8 regnr;
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= PCF50633_NUM_REGULATORS)
+		return -EINVAL;
+
+	/* the *ENA register is always one after the *OUT register */
+	regnr = pcf50633_regulator_registers[regulator_id] + 1;
+
+	return pcf50633_reg_set_bit_mask(pcf, regnr,
+					PCF50633_REGULATOR_ON, 0);
+}
+
+static int pcf50633_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct pcf50633 *pcf = rdev_get_drvdata(rdev);
+	int regulator_id = rdev_get_id(rdev);
+	u8 regnr;
+
+	regulator_id = rdev_get_id(rdev);
+	if (regulator_id >= PCF50633_NUM_REGULATORS)
+		return -EINVAL;
+
+	/* the *ENA register is always one after the *OUT register */
+	regnr = pcf50633_regulator_registers[regulator_id] + 1;
+
+	return pcf50633_reg_read(pcf, regnr) & PCF50633_REGULATOR_ON;
+}
+
+static struct regulator_ops pcf50633_regulator_ops = {
+	.set_voltage = pcf50633_regulator_set_voltage,
+	.get_voltage = pcf50633_regulator_get_voltage,
+	.enable = pcf50633_regulator_enable,
+	.disable = pcf50633_regulator_disable,
+	.is_enabled = pcf50633_regulator_is_enabled,
+};
+
+static struct regulator_desc regulators[] = {
+	[PCF50633_REGULATOR_AUTO] =
+		PCF50633_REGULATOR("auto", PCF50633_REGULATOR_AUTO),
+	[PCF50633_REGULATOR_DOWN1] =
+		PCF50633_REGULATOR("down1", PCF50633_REGULATOR_DOWN1),
+	[PCF50633_REGULATOR_DOWN2] =
+		PCF50633_REGULATOR("down2", PCF50633_REGULATOR_DOWN2),
+	[PCF50633_REGULATOR_LDO1] =
+		PCF50633_REGULATOR("ldo1", PCF50633_REGULATOR_LDO1),
+	[PCF50633_REGULATOR_LDO2] =
+		PCF50633_REGULATOR("ldo2", PCF50633_REGULATOR_LDO2),
+	[PCF50633_REGULATOR_LDO3] =
+		PCF50633_REGULATOR("ldo3", PCF50633_REGULATOR_LDO3),
+	[PCF50633_REGULATOR_LDO4] =
+		PCF50633_REGULATOR("ldo4", PCF50633_REGULATOR_LDO4),
+	[PCF50633_REGULATOR_LDO5] =
+		PCF50633_REGULATOR("ldo5", PCF50633_REGULATOR_LDO5),
+	[PCF50633_REGULATOR_LDO6] =
+		PCF50633_REGULATOR("ldo6", PCF50633_REGULATOR_LDO6),
+	[PCF50633_REGULATOR_HCLDO] =
+		PCF50633_REGULATOR("hcldo", PCF50633_REGULATOR_HCLDO),
+	[PCF50633_REGULATOR_MEMLDO] =
+		PCF50633_REGULATOR("memldo", PCF50633_REGULATOR_MEMLDO),
+};
+
+static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev;
+	struct pcf50633 *pcf;
+
+	/* Already set by core driver */
+	pcf = platform_get_drvdata(pdev);
+
+	rdev = regulator_register(&regulators[pdev->id], &pdev->dev, pcf);
+	if (IS_ERR(rdev))
+		return PTR_ERR(rdev);
+
+	if (pcf->pdata->regulator_registered)
+		pcf->pdata->regulator_registered(pcf, pdev->id);
+
+	return 0;
+}
+
+static int __devexit pcf50633_regulator_remove(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+	regulator_unregister(rdev);
+
+	return 0;
+}
+
+static struct platform_driver pcf50633_regulator_driver = {
+	.driver = {
+		.name = "pcf50633-regltr",
+	},
+	.probe = pcf50633_regulator_probe,
+	.remove = __devexit_p(pcf50633_regulator_remove),
+};
+
+static int __init pcf50633_regulator_init(void)
+{
+	return platform_driver_register(&pcf50633_regulator_driver);
+}
+module_init(pcf50633_regulator_init);
+
+static void __exit pcf50633_regulator_exit(void)
+{
+	platform_driver_unregister(&pcf50633_regulator_driver);
+}
+module_exit(pcf50633_regulator_exit);
+
+MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
+MODULE_DESCRIPTION("PCF50633 regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-regulator");
diff --git a/include/linux/mfd/pcf50633/pmic.h b/include/linux/mfd/pcf50633/pmic.h
new file mode 100644
index 00000000000..2d3dbe53b23
--- /dev/null
+++ b/include/linux/mfd/pcf50633/pmic.h
@@ -0,0 +1,67 @@
+#ifndef __LINUX_MFD_PCF50633_PMIC_H
+#define __LINUX_MFD_PCF50633_PMIC_H
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/platform_device.h>
+
+#define PCF50633_REG_AUTOOUT	0x1a
+#define PCF50633_REG_AUTOENA	0x1b
+#define PCF50633_REG_AUTOCTL	0x1c
+#define PCF50633_REG_AUTOMXC	0x1d
+#define PCF50633_REG_DOWN1OUT	0x1e
+#define PCF50633_REG_DOWN1ENA	0x1f
+#define PCF50633_REG_DOWN1CTL	0x20
+#define PCF50633_REG_DOWN1MXC	0x21
+#define PCF50633_REG_DOWN2OUT	0x22
+#define PCF50633_REG_DOWN2ENA	0x23
+#define PCF50633_REG_DOWN2CTL	0x24
+#define PCF50633_REG_DOWN2MXC	0x25
+#define PCF50633_REG_MEMLDOOUT	0x26
+#define PCF50633_REG_MEMLDOENA	0x27
+#define PCF50633_REG_LDO1OUT	0x2d
+#define PCF50633_REG_LDO1ENA	0x2e
+#define PCF50633_REG_LDO2OUT	0x2f
+#define PCF50633_REG_LDO2ENA	0x30
+#define PCF50633_REG_LDO3OUT	0x31
+#define PCF50633_REG_LDO3ENA	0x32
+#define PCF50633_REG_LDO4OUT	0x33
+#define PCF50633_REG_LDO4ENA	0x34
+#define PCF50633_REG_LDO5OUT	0x35
+#define PCF50633_REG_LDO5ENA	0x36
+#define PCF50633_REG_LDO6OUT	0x37
+#define PCF50633_REG_LDO6ENA	0x38
+#define PCF50633_REG_HCLDOOUT	0x39
+#define PCF50633_REG_HCLDOENA	0x3a
+#define PCF50633_REG_HCLDOOVL	0x40
+
+enum pcf50633_regulator_enable {
+	PCF50633_REGULATOR_ON		= 0x01,
+	PCF50633_REGULATOR_ON_GPIO1	= 0x02,
+	PCF50633_REGULATOR_ON_GPIO2	= 0x04,
+	PCF50633_REGULATOR_ON_GPIO3	= 0x08,
+};
+#define PCF50633_REGULATOR_ON_MASK	0x0f
+
+enum pcf50633_regulator_phase {
+	PCF50633_REGULATOR_ACTPH1	= 0x00,
+	PCF50633_REGULATOR_ACTPH2	= 0x10,
+	PCF50633_REGULATOR_ACTPH3	= 0x20,
+	PCF50633_REGULATOR_ACTPH4	= 0x30,
+};
+#define PCF50633_REGULATOR_ACTPH_MASK	0x30
+
+enum pcf50633_regulator_id {
+	PCF50633_REGULATOR_AUTO,
+	PCF50633_REGULATOR_DOWN1,
+	PCF50633_REGULATOR_DOWN2,
+	PCF50633_REGULATOR_LDO1,
+	PCF50633_REGULATOR_LDO2,
+	PCF50633_REGULATOR_LDO3,
+	PCF50633_REGULATOR_LDO4,
+	PCF50633_REGULATOR_LDO5,
+	PCF50633_REGULATOR_LDO6,
+	PCF50633_REGULATOR_HCLDO,
+	PCF50633_REGULATOR_MEMLDO,
+};
+#endif
+
-- 
GitLab


From d1fdb4f6fbb155af88363bc949a35daa11872d9f Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Fri, 9 Jan 2009 02:02:42 +0100
Subject: [PATCH 067/492] mfd: dm355 evm MMC/SD card detection

Support card detect and writeprotect switches on DM355 EVM.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/mfd/dm355evm_msp.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/mfd/dm355evm_msp.c b/drivers/mfd/dm355evm_msp.c
index 4214b3f7242..7ac12cb0be4 100644
--- a/drivers/mfd/dm355evm_msp.c
+++ b/drivers/mfd/dm355evm_msp.c
@@ -107,6 +107,9 @@ static const u8 msp_gpios[] = {
 	MSP_GPIO(0, SWITCH1), MSP_GPIO(1, SWITCH1),
 	MSP_GPIO(2, SWITCH1), MSP_GPIO(3, SWITCH1),
 	MSP_GPIO(4, SWITCH1),
+	/* switches on MMC/SD sockets */
+	MSP_GPIO(1, SDMMC), MSP_GPIO(2, SDMMC),	/* mmc0 WP, nCD */
+	MSP_GPIO(3, SDMMC), MSP_GPIO(4, SDMMC),	/* mmc1 WP, nCD */
 };
 
 #define MSP_GPIO_REG(offset)	(msp_gpios[(offset)] >> 3)
@@ -304,6 +307,13 @@ static int add_children(struct i2c_client *client)
 		gpio_export(gpio, false);
 	}
 
+	/* MMC/SD inputs -- right after the last config input */
+	if (client->dev.platform_data) {
+		void (*mmcsd_setup)(unsigned) = client->dev.platform_data;
+
+		mmcsd_setup(dm355evm_msp_gpio.base + 8 + 5);
+	}
+
 	/* RTC is a 32 bit counter, no alarm */
 	if (msp_has_rtc()) {
 		child = add_child(client, "rtc-dm355evm",
-- 
GitLab


From 98325f8f8e950818c306cbc224897a1dda471945 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 10 Jan 2009 16:59:53 +0100
Subject: [PATCH 068/492] mfd: Ensure sm501 GPIO pin mode is GPIO when
 configured

When setting an GPIO to either input or output, we
should ensure that the pin configuration elsewhere
in the chip is set to GPIO in-case the initial
setup has not been done correctly.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/mfd/sm501.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index 170f9d47c2f..0e5761f1263 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -41,6 +41,7 @@ struct sm501_gpio_chip {
 	struct gpio_chip	gpio;
 	struct sm501_gpio	*ourgpio;	/* to get back to parent. */
 	void __iomem		*regbase;
+	void __iomem		*control;	/* address of control reg. */
 };
 
 struct sm501_gpio {
@@ -908,6 +909,25 @@ static int sm501_gpio_get(struct gpio_chip *chip, unsigned offset)
 	return result & 1UL;
 }
 
+static void sm501_gpio_ensure_gpio(struct sm501_gpio_chip *smchip,
+				   unsigned long bit)
+{
+	unsigned long ctrl;
+
+	/* check and modify if this pin is not set as gpio. */
+
+	if (readl(smchip->control) & bit) {
+		dev_info(sm501_gpio_to_dev(smchip->ourgpio)->dev,
+			 "changing mode of gpio, bit %08lx\n", bit);
+
+		ctrl = readl(smchip->control);
+		ctrl &= ~bit;
+		writel(ctrl, smchip->control);
+
+		sm501_sync_regs(sm501_gpio_to_dev(smchip->ourgpio));
+	}
+}
+
 static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 
 {
@@ -929,6 +949,8 @@ static void sm501_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 	writel(val, regs);
 
 	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	sm501_gpio_ensure_gpio(smchip, bit);
+
 	spin_unlock_irqrestore(&smgpio->lock, save);
 }
 
@@ -941,8 +963,8 @@ static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
 	unsigned long save;
 	unsigned long ddr;
 
-	dev_info(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
-		 __func__, chip, offset);
+	dev_dbg(sm501_gpio_to_dev(smgpio)->dev, "%s(%p,%d)\n",
+		__func__, chip, offset);
 
 	spin_lock_irqsave(&smgpio->lock, save);
 
@@ -950,6 +972,8 @@ static int sm501_gpio_input(struct gpio_chip *chip, unsigned offset)
 	writel(ddr & ~bit, regs + SM501_GPIO_DDR_LOW);
 
 	sm501_sync_regs(sm501_gpio_to_dev(smgpio));
+	sm501_gpio_ensure_gpio(smchip, bit);
+
 	spin_unlock_irqrestore(&smgpio->lock, save);
 
 	return 0;
@@ -1012,9 +1036,11 @@ static int __devinit sm501_gpio_register_chip(struct sm501_devdata *sm,
 		if (base > 0)
 			base += 32;
 		chip->regbase = gpio->regs + SM501_GPIO_DATA_HIGH;
+		chip->control = sm->regs + SM501_GPIO63_32_CONTROL;
 		gchip->label  = "SM501-HIGH";
 	} else {
 		chip->regbase = gpio->regs + SM501_GPIO_DATA_LOW;
+		chip->control = sm->regs + SM501_GPIO31_0_CONTROL;
 		gchip->label  = "SM501-LOW";
 	}
 
-- 
GitLab


From b29c06ae96acc47e866f29d19075707f91df69c8 Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@openedhand.com>
Date: Sun, 11 Jan 2009 01:21:48 +0100
Subject: [PATCH 069/492] mfd: Fix twl4030-core build

Fixes:
drivers/mfd/twl4030-core.c:657: error: implicit declaration of function
'cpu_is_omap2430'

Not the nicest fix, but this should be improved by a better OMAP clock API
implementation.

Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
---
 drivers/mfd/twl4030-core.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index b59c385cbc1..074b11ffbf4 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -38,6 +38,9 @@
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
 
+#ifdef CONFIG_ARM
+#include <mach/cpu.h>
+#endif
 
 /*
  * The TWL4030 "Triton 2" is one of a family of a multi-function "Power
-- 
GitLab


From 805194c35b91999b139e4d6b6145f4f84fd4c814 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Sat, 10 Jan 2009 15:43:15 +0800
Subject: [PATCH 070/492] sched: partly revert "sched debug: remove NULL
 checking in print_cfs_rt_rq()"

Impact: avoid accessing NULL tg.css->cgroup

In commit 0a0db8f5c9d4bbb9bbfcc2b6cb6bce2d0ef4d73d, I removed checking
NULL tg.css->cgroup, but I realized I was wrong when I found reading
/proc/sched_debug can race with cgroup_create().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_debug.c | 21 +++++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 4293cfa9681..16eeba4e416 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -145,6 +145,19 @@ static void print_rq(struct seq_file *m, struct rq *rq, int rq_cpu)
 	read_unlock_irqrestore(&tasklist_lock, flags);
 }
 
+#if defined(CONFIG_CGROUP_SCHED) && \
+	(defined(CONFIG_FAIR_GROUP_SCHED) || defined(CONFIG_RT_GROUP_SCHED))
+static void task_group_path(struct task_group *tg, char *buf, int buflen)
+{
+	/* may be NULL if the underlying cgroup isn't fully-created yet */
+	if (!tg->css.cgroup) {
+		buf[0] = '\0';
+		return;
+	}
+	cgroup_path(tg->css.cgroup, buf, buflen);
+}
+#endif
+
 void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
 {
 	s64 MIN_vruntime = -1, min_vruntime, max_vruntime = -1,
@@ -154,10 +167,10 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
 	unsigned long flags;
 
 #if defined(CONFIG_CGROUP_SCHED) && defined(CONFIG_FAIR_GROUP_SCHED)
-	char path[128] = "";
+	char path[128];
 	struct task_group *tg = cfs_rq->tg;
 
-	cgroup_path(tg->css.cgroup, path, sizeof(path));
+	task_group_path(tg, path, sizeof(path));
 
 	SEQ_printf(m, "\ncfs_rq[%d]:%s\n", cpu, path);
 #elif defined(CONFIG_USER_SCHED) && defined(CONFIG_FAIR_GROUP_SCHED)
@@ -208,10 +221,10 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq)
 void print_rt_rq(struct seq_file *m, int cpu, struct rt_rq *rt_rq)
 {
 #if defined(CONFIG_CGROUP_SCHED) && defined(CONFIG_RT_GROUP_SCHED)
-	char path[128] = "";
+	char path[128];
 	struct task_group *tg = rt_rq->tg;
 
-	cgroup_path(tg->css.cgroup, path, sizeof(path));
+	task_group_path(tg, path, sizeof(path));
 
 	SEQ_printf(m, "\nrt_rq[%d]:%s\n", cpu, path);
 #else
-- 
GitLab


From 53ce3d9564908794ae7dd32969089b57df5fc098 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Fri, 9 Jan 2009 12:27:08 -0800
Subject: [PATCH 071/492] smp_call_function_single(): be slightly less stupid

If you do

	smp_call_function_single(expression-with-side-effects, ...)

then expression-with-side-effects never gets evaluated on UP builds.

As always, implementing it in C is the correct thing to do.

While we're there, uninline it for size and possible header dependency
reasons.

And create a new kernel/up.c, as a place in which to put
uniprocessor-specific code and storage.  It should mirror kernel/smp.c.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/smp.h | 13 +++----------
 kernel/Makefile     |  6 +++++-
 kernel/up.c         | 18 ++++++++++++++++++
 3 files changed, 26 insertions(+), 11 deletions(-)
 create mode 100644 kernel/up.c

diff --git a/include/linux/smp.h b/include/linux/smp.h
index b8246696810..715196b09d6 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -24,6 +24,9 @@ struct call_single_data {
 /* total number of cpus in this system (may exceed NR_CPUS) */
 extern unsigned int total_cpus;
 
+int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
+				int wait);
+
 #ifdef CONFIG_SMP
 
 #include <linux/preempt.h>
@@ -79,8 +82,6 @@ smp_call_function_mask(cpumask_t mask, void(*func)(void *info), void *info,
 	return 0;
 }
 
-int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
-				int wait);
 void __smp_call_function_single(int cpuid, struct call_single_data *data);
 
 /*
@@ -140,14 +141,6 @@ static inline int up_smp_call_function(void (*func)(void *), void *info)
 static inline void smp_send_reschedule(int cpu) { }
 #define num_booting_cpus()			1
 #define smp_prepare_boot_cpu()			do {} while (0)
-#define smp_call_function_single(cpuid, func, info, wait) \
-({ \
-	WARN_ON(cpuid != 0);	\
-	local_irq_disable();	\
-	(func)(info);		\
-	local_irq_enable();	\
-	0;			\
-})
 #define smp_call_function_mask(mask, func, info, wait) \
 			(up_smp_call_function(func, info))
 #define smp_call_function_many(mask, func, info, wait) \
diff --git a/kernel/Makefile b/kernel/Makefile
index 2921d90ce32..2aebc4cd787 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -40,7 +40,11 @@ obj-$(CONFIG_RT_MUTEXES) += rtmutex.o
 obj-$(CONFIG_DEBUG_RT_MUTEXES) += rtmutex-debug.o
 obj-$(CONFIG_RT_MUTEX_TESTER) += rtmutex-tester.o
 obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
-obj-$(CONFIG_USE_GENERIC_SMP_HELPERS) += smp.o
+ifeq ($(CONFIG_USE_GENERIC_SMP_HELPERS),y)
+obj-y += smp.o
+else
+obj-y += up.o
+endif
 obj-$(CONFIG_SMP) += spinlock.o
 obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock.o
 obj-$(CONFIG_PROVE_LOCKING) += spinlock.o
diff --git a/kernel/up.c b/kernel/up.c
new file mode 100644
index 00000000000..ce62cc9e9f7
--- /dev/null
+++ b/kernel/up.c
@@ -0,0 +1,18 @@
+/*
+ * Uniprocessor-only support functions.  The counterpart to kernel/smp.c
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/smp.h>
+
+int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+				int wait)
+{
+	WARN_ON(cpuid != 0);
+	local_irq_disable();
+	(func)(info);
+	local_irq_enable();
+	return 0;
+}
+EXPORT_SYMBOL(smp_call_function_single);
-- 
GitLab


From 93423b8665f43a0c7a006a1d5be048b99db56d32 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sun, 11 Jan 2009 05:15:21 +0100
Subject: [PATCH 072/492] smp_call_function_single(): be slightly less stupid,
 fix

Impact: build fix on Alpha

 kernel/up.c: In function 'smp_call_function_single':
 kernel/up.c:12: error: 'cpuid' undeclared (first use in this function)
 kernel/up.c:12: error: (Each undeclared identifier is reported only once
 kernel/up.c:12: error: for each function it appears in.)

The typo didnt show up on x86 because 'cpuid' happens to be a
function address as well ...

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/up.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/up.c b/kernel/up.c
index ce62cc9e9f7..c04b9dcfceb 100644
--- a/kernel/up.c
+++ b/kernel/up.c
@@ -9,10 +9,12 @@
 int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 				int wait)
 {
-	WARN_ON(cpuid != 0);
+	WARN_ON(cpu != 0);
+
 	local_irq_disable();
 	(func)(info);
 	local_irq_enable();
+
 	return 0;
 }
 EXPORT_SYMBOL(smp_call_function_single);
-- 
GitLab


From 03080e5cbe0222744173d3e726f6ba5d13b7f04e Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Sat, 10 Jan 2009 21:45:42 -0800
Subject: [PATCH 073/492] RDMA/nes: Fix for NIPQUAD removal

Commit 63779436 ("drivers: replace NIPQUAD()") accidentally replaced
some HIPQUAD()s, causing IP addresses to be printed in reverse order.
Add temporary local vars until the byteswapping can be pushed further
up the stack.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/nes/nes_cm.c    | 12 +++++++++---
 drivers/infiniband/hw/nes/nes_utils.c |  4 +++-
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index a812db24347..ca9ef3fbd33 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -778,12 +778,13 @@ static struct nes_cm_node *find_node(struct nes_cm_core *cm_core,
 	unsigned long flags;
 	struct list_head *hte;
 	struct nes_cm_node *cm_node;
+	__be32 tmp_addr = cpu_to_be32(loc_addr);
 
 	/* get a handle on the hte */
 	hte = &cm_core->connected_nodes;
 
 	nes_debug(NES_DBG_CM, "Searching for an owner node: %pI4:%x from core %p->%p\n",
-		  &loc_addr, loc_port, cm_core, hte);
+		  &tmp_addr, loc_port, cm_core, hte);
 
 	/* walk list and find cm_node associated with this session ID */
 	spin_lock_irqsave(&cm_core->ht_lock, flags);
@@ -816,6 +817,7 @@ static struct nes_cm_listener *find_listener(struct nes_cm_core *cm_core,
 {
 	unsigned long flags;
 	struct nes_cm_listener *listen_node;
+	__be32 tmp_addr = cpu_to_be32(dst_addr);
 
 	/* walk list and find cm_node associated with this session ID */
 	spin_lock_irqsave(&cm_core->listen_list_lock, flags);
@@ -833,7 +835,7 @@ static struct nes_cm_listener *find_listener(struct nes_cm_core *cm_core,
 	spin_unlock_irqrestore(&cm_core->listen_list_lock, flags);
 
 	nes_debug(NES_DBG_CM, "Unable to find listener for %pI4:%x\n",
-		  &dst_addr, dst_port);
+		  &tmp_addr, dst_port);
 
 	/* no listener */
 	return NULL;
@@ -2059,6 +2061,7 @@ static int mini_cm_recv_pkt(struct nes_cm_core *cm_core,
 	struct tcphdr *tcph;
 	struct nes_cm_info nfo;
 	int skb_handled = 1;
+	__be32 tmp_daddr, tmp_saddr;
 
 	if (!skb)
 		return 0;
@@ -2074,8 +2077,11 @@ static int mini_cm_recv_pkt(struct nes_cm_core *cm_core,
 	nfo.rem_addr = ntohl(iph->saddr);
 	nfo.rem_port = ntohs(tcph->source);
 
+	tmp_daddr = cpu_to_be32(iph->daddr);
+	tmp_saddr = cpu_to_be32(iph->saddr);
+
 	nes_debug(NES_DBG_CM, "Received packet: dest=%pI4:0x%04X src=%pI4:0x%04X\n",
-		  &iph->daddr, tcph->dest, &iph->saddr, tcph->source);
+		  &tmp_daddr, tcph->dest, &tmp_saddr, tcph->source);
 
 	do {
 		cm_node = find_node(cm_core,
diff --git a/drivers/infiniband/hw/nes/nes_utils.c b/drivers/infiniband/hw/nes/nes_utils.c
index aa9b7348c72..6f3bc1b6bf2 100644
--- a/drivers/infiniband/hw/nes/nes_utils.c
+++ b/drivers/infiniband/hw/nes/nes_utils.c
@@ -655,6 +655,7 @@ int nes_arp_table(struct nes_device *nesdev, u32 ip_addr, u8 *mac_addr, u32 acti
 	struct nes_adapter *nesadapter = nesdev->nesadapter;
 	int arp_index;
 	int err = 0;
+	__be32 tmp_addr;
 
 	for (arp_index = 0; (u32) arp_index < nesadapter->arp_table_size; arp_index++) {
 		if (nesadapter->arp_table[arp_index].ip_addr == ip_addr)
@@ -682,8 +683,9 @@ int nes_arp_table(struct nes_device *nesdev, u32 ip_addr, u8 *mac_addr, u32 acti
 
 	/* DELETE or RESOLVE */
 	if (arp_index == nesadapter->arp_table_size) {
+		tmp_addr = cpu_to_be32(ip_addr);
 		nes_debug(NES_DBG_NETDEV, "MAC for %pI4 not in ARP table - cannot %s\n",
-			  &ip_addr, action == NES_ARP_RESOLVE ? "resolve" : "delete");
+			  &tmp_addr, action == NES_ARP_RESOLVE ? "resolve" : "delete");
 		return -1;
 	}
 
-- 
GitLab


From fc4dbea733119b37d36d0006b8be778db2601946 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sat, 10 Jan 2009 23:44:45 -0800
Subject: [PATCH 074/492] sparc: Fix asm/signal.h for 32-bit.

Fix a 32-bit sparc regression reported by Robert Reif.

_NSIG_BPW needs to be 32 for 32-bit and 64 for 64-bit

Tested-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/signal.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h
index 41535e77b25..cba45206b7f 100644
--- a/arch/sparc/include/asm/signal.h
+++ b/arch/sparc/include/asm/signal.h
@@ -84,7 +84,11 @@
 
 #define __OLD_NSIG	32
 #define __NEW_NSIG      64
+#ifdef __arch64__
 #define _NSIG_BPW       64
+#else
+#define _NSIG_BPW       32
+#endif
 #define _NSIG_WORDS     (__NEW_NSIG / _NSIG_BPW)
 
 #define SIGRTMIN       32
-- 
GitLab


From 216c32d4407ea6951d6832773fdb3de058e12c62 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Thu, 8 Jan 2009 16:42:08 -0800
Subject: [PATCH 075/492] irda: fix incomplete conversation to internal stats

Fix for commit af0490810c (irda: convert to internal stats)

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/irda/au1k_ir.c  | 2 +-
 drivers/net/irda/donauboe.c | 8 ++++----
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index 75a1d0a86de..941164076a2 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -594,7 +594,7 @@ static int au1k_irda_rx(struct net_device *dev)
 			update_rx_stats(dev, flags, count);
 			skb=alloc_skb(count+1,GFP_ATOMIC);
 			if (skb == NULL) {
-				aup->stats.rx_dropped++;
+				aup->netdev->stats.rx_dropped++;
 				continue;
 			}
 			skb_reserve(skb, 1);
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index 687c2d53d4d..6f3e7f71658 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -1194,13 +1194,13 @@ toshoboe_interrupt (int irq, void *dev_id)
               txp = txpc;
               txpc++;
               txpc %= TX_SLOTS;
-              self->stats.tx_packets++;
+              self->netdev->stats.tx_packets++;
               if (self->ring->tx[txpc].control & OBOE_CTL_TX_HW_OWNS)
                   self->ring->tx[txp].control &= ~OBOE_CTL_TX_RTCENTX;
             }
-          self->stats.tx_packets--;
+          self->netdev->stats.tx_packets--;
 #else
-          self->stats.tx_packets++;
+          self->netdev->stats.tx_packets++;
 #endif
           toshoboe_start_DMA(self, OBOE_CONFIG0H_ENTX);
         }
@@ -1280,7 +1280,7 @@ dumpbufs(self->rx_bufs[self->rxs],len,'<');
                       skb_put (skb, len);
                       skb_copy_to_linear_data(skb, self->rx_bufs[self->rxs],
 					      len);
-                      self->stats.rx_packets++;
+                      self->netdev->stats.rx_packets++;
                       skb->dev = self->netdev;
                       skb_reset_mac_header(skb);
                       skb->protocol = htons (ETH_P_IRDA);
-- 
GitLab


From 58854c6b411e9e9f46b39bd7092022f639c41904 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Fri, 9 Jan 2009 23:19:26 -0800
Subject: [PATCH 076/492] r6040: fix ifconfig down and freeing of tx/rx
 descriptors

This patch fixes warnings and such traces that appear when doing
an ifconfig down on the interface:

WARNING: at arch/x86/kernel/pci-dma.c:376 dma_free_coherent+0x40/0x7d()
Modules linked in:

Signed-off-by: Joe Chou <joe.chou@rdc.com.tw>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r6040.c | 32 +++++++++++++++++++++-----------
 1 file changed, 21 insertions(+), 11 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index cf3a082bc89..b59837e8075 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -457,22 +457,12 @@ static void r6040_down(struct net_device *dev)
 	iowrite16(adrp[0], ioaddr + MID_0L);
 	iowrite16(adrp[1], ioaddr + MID_0M);
 	iowrite16(adrp[2], ioaddr + MID_0H);
-	free_irq(dev->irq, dev);
-
-	/* Free RX buffer */
-	r6040_free_rxbufs(dev);
-
-	/* Free TX buffer */
-	r6040_free_txbufs(dev);
-
-	/* Free Descriptor memory */
-	pci_free_consistent(pdev, RX_DESC_SIZE, lp->rx_ring, lp->rx_ring_dma);
-	pci_free_consistent(pdev, TX_DESC_SIZE, lp->tx_ring, lp->tx_ring_dma);
 }
 
 static int r6040_close(struct net_device *dev)
 {
 	struct r6040_private *lp = netdev_priv(dev);
+	struct pci_dev *pdev = lp->pdev;
 
 	/* deleted timer */
 	del_timer_sync(&lp->timer);
@@ -481,8 +471,28 @@ static int r6040_close(struct net_device *dev)
 	napi_disable(&lp->napi);
 	netif_stop_queue(dev);
 	r6040_down(dev);
+
+	free_irq(dev->irq, dev);
+
+	/* Free RX buffer */
+	r6040_free_rxbufs(dev);
+
+	/* Free TX buffer */
+	r6040_free_txbufs(dev);
+
 	spin_unlock_irq(&lp->lock);
 
+	/* Free Descriptor memory */
+	if (lp->rx_ring) {
+		pci_free_consistent(pdev, RX_DESC_SIZE, lp->rx_ring, lp->rx_ring_dma);
+		lp->rx_ring = 0;
+	}
+
+	if (lp->tx_ring) {
+		pci_free_consistent(pdev, TX_DESC_SIZE, lp->tx_ring, lp->tx_ring_dma);
+		lp->tx_ring = 0;
+	}
+
 	return 0;
 }
 
-- 
GitLab


From 9f1136182f732f6e847fc43bd88b579739d5c211 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Thu, 8 Jan 2009 15:04:45 +0000
Subject: [PATCH 077/492] r6040: generate random ethernet MAC address when not
 initialized

This patch makes the ethernet driver assign a random ethernet
MAC address when the bootloader does not set it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r6040.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index b59837e8075..8b5d50927eb 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -1153,8 +1153,10 @@ static int __devinit r6040_init_one(struct pci_dev *pdev,
 
 	/* Some bootloader/BIOSes do not initialize
 	 * MAC address, warn about that */
-	if (!(adrp[0] || adrp[1] || adrp[2]))
-		printk(KERN_WARNING DRV_NAME ": MAC address not initialized\n");
+	if (!(adrp[0] || adrp[1] || adrp[2])) {
+		printk(KERN_WARNING DRV_NAME ": MAC address not initialized, generating random\n");
+		random_ether_addr(dev->dev_addr);
+	}
 
 	/* Link new device into r6040_root_dev */
 	lp->pdev = pdev;
-- 
GitLab


From 68334115eecc2502426657a1449dd04b3572ae0d Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Thu, 8 Jan 2009 15:04:50 +0000
Subject: [PATCH 078/492] r6040: no longer mark r6040 as being experimental

We do not depend on EXPERIMENTAL and the driver is
not experimental, so remove this warning.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 65afda4a62d..9fe8cb7d43a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1600,7 +1600,7 @@ config 8139_OLD_RX_RESET
 	  old RX-reset behavior.  If unsure, say N.
 
 config R6040
-	tristate "RDC R6040 Fast Ethernet Adapter support (EXPERIMENTAL)"
+	tristate "RDC R6040 Fast Ethernet Adapter support"
 	depends on NET_PCI && PCI
 	select CRC32
 	select MII
-- 
GitLab


From e56e356b21c285663712dc39aa9e4303072cbaba Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Thu, 8 Jan 2009 15:04:57 +0000
Subject: [PATCH 079/492] r6040: bump release to 0.21

Bump version to 0.21 and release date to 09Jan2009.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/r6040.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 8b5d50927eb..454e7dea0bc 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -49,8 +49,8 @@
 #include <asm/processor.h>
 
 #define DRV_NAME	"r6040"
-#define DRV_VERSION	"0.20"
-#define DRV_RELDATE	"07Jan2009"
+#define DRV_VERSION	"0.21"
+#define DRV_RELDATE	"09Jan2009"
 
 /* PHY CHIP Address */
 #define PHY1_ADDR	1	/* For MAC1 */
-- 
GitLab


From eefacf3b4f8a688aeaddd2f7c46ac5ffceb92472 Mon Sep 17 00:00:00 2001
From: David Graham <david.graham@intel.com>
Date: Thu, 8 Jan 2009 16:03:29 +0000
Subject: [PATCH 080/492] e1000e: Add process name to WARN message when
 detecting Mutex contention

Adds process name of the current mutex holder to the WARN message output
when the e1000e driver attempts to acquire the nvm_mutex and finds that
it is already being held. With this patch the WARN message indicates
both the process name of the current mutex holder and the process name of
the attempted acquisition, which together will help to identify the
contending codepaths.

Signed-off-by: David Graham <david.graham@intel.com>
Acked-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/e1000e/ich8lan.c | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c
index f2a5963b5a9..e415e81ecd3 100644
--- a/drivers/net/e1000e/ich8lan.c
+++ b/drivers/net/e1000e/ich8lan.c
@@ -390,7 +390,8 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
 }
 
 static DEFINE_MUTEX(nvm_mutex);
-static pid_t nvm_owner = -1;
+static pid_t nvm_owner_pid = -1;
+static char nvm_owner_name[TASK_COMM_LEN] = "";
 
 /**
  *  e1000_acquire_swflag_ich8lan - Acquire software control flag
@@ -408,11 +409,15 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 	might_sleep();
 
 	if (!mutex_trylock(&nvm_mutex)) {
-		WARN(1, KERN_ERR "e1000e mutex contention. Owned by pid %d\n",
-		     nvm_owner);
+		WARN(1, KERN_ERR "e1000e mutex contention. Owned by process "
+		     "%s (pid %d), required by process %s (pid %d)\n",
+		     nvm_owner_name, nvm_owner_pid,
+		     current->comm, current->pid);
+
 		mutex_lock(&nvm_mutex);
 	}
-	nvm_owner = current->pid;
+	nvm_owner_pid = current->pid;
+	strncpy(nvm_owner_name, current->comm, TASK_COMM_LEN);
 
 	while (timeout) {
 		extcnf_ctrl = er32(EXTCNF_CTRL);
@@ -430,7 +435,8 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
 		hw_dbg(hw, "FW or HW has locked the resource for too long.\n");
 		extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
 		ew32(EXTCNF_CTRL, extcnf_ctrl);
-		nvm_owner = -1;
+		nvm_owner_pid = -1;
+		strcpy(nvm_owner_name, "");
 		mutex_unlock(&nvm_mutex);
 		return -E1000_ERR_CONFIG;
 	}
@@ -454,7 +460,8 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
 	extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
 	ew32(EXTCNF_CTRL, extcnf_ctrl);
 
-	nvm_owner = -1;
+	nvm_owner_pid = -1;
+	strcpy(nvm_owner_name, "");
 	mutex_unlock(&nvm_mutex);
 }
 
-- 
GitLab


From 9498c05820580afbf03a317b0b5bdb0ca0e27e40 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu, 8 Jan 2009 21:27:06 +0000
Subject: [PATCH 081/492] ipcomp: Remove spurious truesize increase

When I made ipcomp use frags, I forgot to take out the original
truesize update that was added for pskb_expand_head.  As we no
longer expand the head of skb, that update should have been removed.

This bug is not related to the truesize warnings since we only
made it bigger than what it should've been.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/xfrm/xfrm_ipcomp.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/net/xfrm/xfrm_ipcomp.c b/net/xfrm/xfrm_ipcomp.c
index c609a4b98e1..42cd18391f4 100644
--- a/net/xfrm/xfrm_ipcomp.c
+++ b/net/xfrm/xfrm_ipcomp.c
@@ -63,7 +63,6 @@ static int ipcomp_decompress(struct xfrm_state *x, struct sk_buff *skb)
 	if (len > skb_tailroom(skb))
 		len = skb_tailroom(skb);
 
-	skb->truesize += len;
 	__skb_put(skb, len);
 
 	len += plen;
-- 
GitLab


From 4ca857958c129781b46870ec1d2d13c50aafb8c5 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 9 Jan 2009 02:39:57 +0000
Subject: [PATCH 082/492] b44: fix misalignment and wasted space in rx handling

Broadcom 4400 puts a header of configurable size (apparently needs
to be at least 28 bytes) in front of received packets. When handling
this, the previous code accidentally added the offset 30 *twice* for
the software and once for the hardware, thereby cancelling out the
IP alignment effect of the 30 byte padding and wasting an additional
30 bytes of memory per packet.

This patch fixes this problem and improves routing throughput by
about 30% on MIPS, where unaligned access is expensive.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/b44.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 6926ebedfdc..5ae131c147f 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -73,8 +73,8 @@
 	  (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP))
 #define NEXT_TX(N)		(((N) + 1) & (B44_TX_RING_SIZE - 1))
 
-#define RX_PKT_OFFSET		30
-#define RX_PKT_BUF_SZ		(1536 + RX_PKT_OFFSET + 64)
+#define RX_PKT_OFFSET		(RX_HEADER_LEN + 2)
+#define RX_PKT_BUF_SZ		(1536 + RX_PKT_OFFSET)
 
 /* minimum number of free TX descriptors required to wake up TX process */
 #define B44_TX_WAKEUP_THRESH		(B44_TX_RING_SIZE / 4)
@@ -682,7 +682,6 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 	}
 
 	rh = (struct rx_header *) skb->data;
-	skb_reserve(skb, RX_PKT_OFFSET);
 
 	rh->len = 0;
 	rh->flags = 0;
@@ -693,13 +692,13 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 	if (src_map != NULL)
 		src_map->skb = NULL;
 
-	ctrl  = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - RX_PKT_OFFSET));
+	ctrl = (DESC_CTRL_LEN & RX_PKT_BUF_SZ);
 	if (dest_idx == (B44_RX_RING_SIZE - 1))
 		ctrl |= DESC_CTRL_EOT;
 
 	dp = &bp->rx_ring[dest_idx];
 	dp->ctrl = cpu_to_le32(ctrl);
-	dp->addr = cpu_to_le32((u32) mapping + RX_PKT_OFFSET + bp->dma_offset);
+	dp->addr = cpu_to_le32((u32) mapping + bp->dma_offset);
 
 	if (bp->flags & B44_FLAG_RX_RING_HACK)
 		b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma,
@@ -809,8 +808,8 @@ static int b44_rx(struct b44 *bp, int budget)
 			ssb_dma_unmap_single(bp->sdev, map,
 					     skb_size, DMA_FROM_DEVICE);
 			/* Leave out rx_header */
-                	skb_put(skb, len + RX_PKT_OFFSET);
-            	        skb_pull(skb, RX_PKT_OFFSET);
+			skb_put(skb, len + RX_PKT_OFFSET);
+			skb_pull(skb, RX_PKT_OFFSET);
 		} else {
 			struct sk_buff *copy_skb;
 
-- 
GitLab


From c224969e636ea027e7ce474b48e84922e62ca1d6 Mon Sep 17 00:00:00 2001
From: Jesper Dangaard Brouer <jdb@comx.dk>
Date: Fri, 9 Jan 2009 03:14:47 +0000
Subject: [PATCH 083/492] qlge: Naming interrupt vectors

Name interrupt vectors according to the new naming standard, by Robert
Olsson and DaveM.

The qlge driver were very close to the new standard, thus the change
is kind of trivial.

Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index f4c016012f1..b7e40add958 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -2746,14 +2746,14 @@ static void ql_resolve_queues_to_irqs(struct ql_adapter *qdev)
 				 * Outbound queue is for outbound completions only.
 				 */
 				intr_context->handler = qlge_msix_tx_isr;
-				sprintf(intr_context->name, "%s-txq-%d",
+				sprintf(intr_context->name, "%s-tx-%d",
 					qdev->ndev->name, i);
 			} else {
 				/*
 				 * Inbound queues handle unicast frames only.
 				 */
 				intr_context->handler = qlge_msix_rx_isr;
-				sprintf(intr_context->name, "%s-rxq-%d",
+				sprintf(intr_context->name, "%s-rx-%d",
 					qdev->ndev->name, i);
 			}
 		}
-- 
GitLab


From 3d58cefd823e47209ffcac9cada0a618771da1a4 Mon Sep 17 00:00:00 2001
From: Frank Blaschka <frank.blaschka@de.ibm.com>
Date: Fri, 9 Jan 2009 03:44:00 +0000
Subject: [PATCH 084/492] qeth: fix usage of netdev_ops

Have separate netdev_ops for OSA and HiperSocket/TR.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/s390/net/qeth_l2_main.c |  2 +-
 drivers/s390/net/qeth_l3_main.c | 24 ++++++++++++++++++++----
 2 files changed, 21 insertions(+), 5 deletions(-)

diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index c4f1b046c3b..07ab8a5c1c4 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -916,7 +916,7 @@ static struct ethtool_ops qeth_l2_osn_ops = {
 	.get_drvinfo = qeth_core_get_drvinfo,
 };
 
-static struct net_device_ops qeth_l2_netdev_ops = {
+static const struct net_device_ops qeth_l2_netdev_ops = {
 	.ndo_open		= qeth_l2_open,
 	.ndo_stop		= qeth_l2_stop,
 	.ndo_get_stats		= qeth_get_stats,
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 68d623ab7e6..3d04920b9bb 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2894,7 +2894,7 @@ qeth_l3_neigh_setup(struct net_device *dev, struct neigh_parms *np)
 	return 0;
 }
 
-static struct net_device_ops qeth_l3_netdev_ops = {
+static const struct net_device_ops qeth_l3_netdev_ops = {
 	.ndo_open		= qeth_l3_open,
 	.ndo_stop		= qeth_l3_stop,
 	.ndo_get_stats		= qeth_get_stats,
@@ -2909,6 +2909,22 @@ static struct net_device_ops qeth_l3_netdev_ops = {
 	.ndo_tx_timeout	   	= qeth_tx_timeout,
 };
 
+static const struct net_device_ops qeth_l3_osa_netdev_ops = {
+	.ndo_open		= qeth_l3_open,
+	.ndo_stop		= qeth_l3_stop,
+	.ndo_get_stats		= qeth_get_stats,
+	.ndo_start_xmit		= qeth_l3_hard_start_xmit,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_multicast_list = qeth_l3_set_multicast_list,
+	.ndo_do_ioctl	   	= qeth_l3_do_ioctl,
+	.ndo_change_mtu	   	= qeth_change_mtu,
+	.ndo_vlan_rx_register	= qeth_l3_vlan_rx_register,
+	.ndo_vlan_rx_add_vid	= qeth_l3_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid   = qeth_l3_vlan_rx_kill_vid,
+	.ndo_tx_timeout	   	= qeth_tx_timeout,
+	.ndo_neigh_setup	= qeth_l3_neigh_setup,
+};
+
 static int qeth_l3_setup_netdev(struct qeth_card *card)
 {
 	if (card->info.type == QETH_CARD_TYPE_OSAE) {
@@ -2919,12 +2935,12 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
 #endif
 			if (!card->dev)
 				return -ENODEV;
+			card->dev->netdev_ops = &qeth_l3_netdev_ops;
 		} else {
 			card->dev = alloc_etherdev(0);
 			if (!card->dev)
 				return -ENODEV;
-			qeth_l3_netdev_ops.ndo_neigh_setup =
-				qeth_l3_neigh_setup;
+			card->dev->netdev_ops = &qeth_l3_osa_netdev_ops;
 
 			/*IPv6 address autoconfiguration stuff*/
 			qeth_l3_get_unique_id(card);
@@ -2937,6 +2953,7 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
 		if (!card->dev)
 			return -ENODEV;
 		card->dev->flags |= IFF_NOARP;
+		card->dev->netdev_ops = &qeth_l3_netdev_ops;
 		qeth_l3_iqd_read_initial_mac(card);
 	} else
 		return -ENODEV;
@@ -2944,7 +2961,6 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
 	card->dev->ml_priv = card;
 	card->dev->watchdog_timeo = QETH_TX_TIMEOUT;
 	card->dev->mtu = card->info.initial_mtu;
-	card->dev->netdev_ops = &qeth_l3_netdev_ops;
 	SET_ETHTOOL_OPS(card->dev, &qeth_l3_ethtool_ops);
 	card->dev->features |=	NETIF_F_HW_VLAN_TX |
 				NETIF_F_HW_VLAN_RX |
-- 
GitLab


From c17931c52ec6b1af710185986e10c344039edeb7 Mon Sep 17 00:00:00 2001
From: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Date: Fri, 9 Jan 2009 03:53:17 +0000
Subject: [PATCH 085/492] 3c59x: Use device_set_wakeup_enable

Since dev->power.should_wakeup bit is used by the PCI core to
decide whether the device should wake up the system from sleep
states, set this bit by calling device_set_wakeup_enable().

This restores proper WOL for the 3c59x driver.

Reported-and-tested-by: Graeme Wilford <gwilford@gmail.com>
Reported-by: Gunnar Degnbol <degnbol@danbbs.dk>
Signed-off-by: Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/3c59x.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 665e7fdf27a..cdbbb6226fc 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -3109,6 +3109,8 @@ static void acpi_set_WOL(struct net_device *dev)
 	struct vortex_private *vp = netdev_priv(dev);
 	void __iomem *ioaddr = vp->ioaddr;
 
+	device_set_wakeup_enable(vp->gendev, vp->enable_wol);
+
 	if (vp->enable_wol) {
 		/* Power up on: 1==Downloaded Filter, 2==Magic Packets, 4==Link Status. */
 		EL3WINDOW(7);
-- 
GitLab


From 2a4d71d69f97cef48da969ab917b55e0193ed9ec Mon Sep 17 00:00:00 2001
From: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Date: Fri, 9 Jan 2009 07:34:00 +0000
Subject: [PATCH 086/492] wimax: fix typo in kernel-doc for debugfs_dentry in
 struct wimax_dev

The kernel-doc was referring to member @debufs_dentry instead of
@debugfs_dentry.

Reported by Randy Dunlap http://marc.info/?l=linux-netdev&m=123147942302885&w=2

As well, escape the colon in the field's text description, as it is
causing the generated text to be erraticly broken up (with paragraphs
moved down). Could not find a reason why it is happening so, even when
other field descriptions use colons and work as expected.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/wimax.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/net/wimax.h b/include/net/wimax.h
index 073809ce94f..6b3824edb39 100644
--- a/include/net/wimax.h
+++ b/include/net/wimax.h
@@ -323,8 +323,8 @@ struct input_dev;
  *
  * @rf_hw: [private] State of the hardware radio switch (OFF/ON)
  *
- * @debufs_dentry: [private] Used to hook up a debugfs entry. This
- *     shows up in the debugfs root as wimax:DEVICENAME.
+ * @debugfs_dentry: [private] Used to hook up a debugfs entry. This
+ *     shows up in the debugfs root as wimax\:DEVICENAME.
  *
  * Description:
  * This structure defines a common interface to access all WiMAX
-- 
GitLab


From 6c614a50206ee56c21b34cc02d0bd40e756db87e Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 9 Jan 2009 10:22:21 +0000
Subject: [PATCH 087/492] net/tipc/bcast.h: use ARRAY_SIZE

ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@i@
@@

#include <linux/kernel.h>

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/tipc/bcast.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/tipc/bcast.h b/net/tipc/bcast.h
index 5aa024b99c5..2f2d731bc1c 100644
--- a/net/tipc/bcast.h
+++ b/net/tipc/bcast.h
@@ -124,7 +124,7 @@ static inline int tipc_nmap_equal(struct tipc_node_map *nm_a, struct tipc_node_m
 static inline void tipc_nmap_diff(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b,
 				  struct tipc_node_map *nm_diff)
 {
-	int stop = sizeof(nm_a->map) / sizeof(u32);
+	int stop = ARRAY_SIZE(nm_a->map);
 	int w;
 	int b;
 	u32 map;
-- 
GitLab


From f3d8b2e467da7a9237a45248ff03b56b6a7c3df7 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 9 Jan 2009 10:22:22 +0000
Subject: [PATCH 088/492] net/bridge/netfilter: move a dereference below a NULL
 test

In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/netfilter/ebtables.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index fa108c46e85..8a8743d7d6e 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -85,12 +85,13 @@ static inline int ebt_do_match (struct ebt_entry_match *m,
 static inline int ebt_dev_check(char *entry, const struct net_device *device)
 {
 	int i = 0;
-	const char *devname = device->name;
+	const char *devname;
 
 	if (*entry == '\0')
 		return 0;
 	if (!device)
 		return 1;
+	devname = device->name;
 	/* 1 is the wildcard token */
 	while (entry[i] != '\0' && entry[i] != 1 && entry[i] == devname[i])
 		i++;
-- 
GitLab


From debc251b602fa4795c00c0aa82caa28cebc619ee Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 9 Jan 2009 10:22:53 +0000
Subject: [PATCH 089/492] drivers/isdn/hardware/mISDN: move a dereference below
 a NULL test

In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/hardware/mISDN/hfcmulti.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 97f4708b387..595ba8eb4a0 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -3615,7 +3615,7 @@ hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 static void
 ph_state_change(struct dchannel *dch)
 {
-	struct hfc_multi *hc = dch->hw;
+	struct hfc_multi *hc;
 	int ch, i;
 
 	if (!dch) {
@@ -3623,6 +3623,7 @@ ph_state_change(struct dchannel *dch)
 		    __func__);
 		return;
 	}
+	hc = dch->hw;
 	ch = dch->slot;
 
 	if (hc->type == 1) {
-- 
GitLab


From 0397a2648434a65d73564216c4f96945c192ad4a Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 9 Jan 2009 10:23:09 +0000
Subject: [PATCH 090/492] drivers/net/hamradio/6pack.c: move a dereference
 below a NULL test

In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/hamradio/6pack.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 50f1e172ee8..2d4089894ec 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -717,11 +717,12 @@ static int sixpack_ioctl(struct tty_struct *tty, struct file *file,
 	unsigned int cmd, unsigned long arg)
 {
 	struct sixpack *sp = sp_get(tty);
-	struct net_device *dev = sp->dev;
+	struct net_device *dev;
 	unsigned int tmp, err;
 
 	if (!sp)
 		return -ENXIO;
+	dev = sp->dev;
 
 	switch(cmd) {
 	case SIOCGIFNAME:
-- 
GitLab


From 43baa5bb26298e8e268056c58900098ce8454548 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 9 Jan 2009 10:23:10 +0000
Subject: [PATCH 091/492] drivers/net/wireless/libertas: move a dereference
 below a NULL test

In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.  I have also taken advantage of the availability
of the value of priv->dev in the subsequent calls to netif_stop_queue and
netif_carrier_off.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wireless/libertas/main.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 3dba8367944..4e0007d2003 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -1369,7 +1369,7 @@ EXPORT_SYMBOL_GPL(lbs_start_card);
 
 void lbs_stop_card(struct lbs_private *priv)
 {
-	struct net_device *dev = priv->dev;
+	struct net_device *dev;
 	struct cmd_ctrl_node *cmdnode;
 	unsigned long flags;
 
@@ -1377,9 +1377,10 @@ void lbs_stop_card(struct lbs_private *priv)
 
 	if (!priv)
 		goto out;
+	dev = priv->dev;
 
-	netif_stop_queue(priv->dev);
-	netif_carrier_off(priv->dev);
+	netif_stop_queue(dev);
+	netif_carrier_off(dev);
 
 	lbs_debugfs_remove_one(priv);
 	if (priv->mesh_tlv) {
-- 
GitLab


From 0faac9f75fa4260d67fed5a67bb2f16dbe2e93c8 Mon Sep 17 00:00:00 2001
From: Clifford Wolf <clifford@clifford.at>
Date: Fri, 9 Jan 2009 10:23:11 +0000
Subject: [PATCH 092/492] netdev: gianfar: add MII ioctl handler

This is the same kind of wrapper that can also be found in many
other network device drivers.

Tested with a freescale MPC8349E host CPU:
Toggled the interface LEDs on a DP83865 PHY.

Signed-off-by: Clifford Wolf <clifford@clifford.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/gianfar.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 1b8deca8b9f..efcbeb6c867 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -296,6 +296,20 @@ err_out:
 	return err;
 }
 
+/* Ioctl MII Interface */
+static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return -EINVAL;
+
+	if (!priv->phydev)
+		return -ENODEV;
+
+	return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
+}
+
 /* Set up the ethernet device structure, private data,
  * and anything else we need before we start */
 static int gfar_probe(struct of_device *ofdev,
@@ -366,6 +380,7 @@ static int gfar_probe(struct of_device *ofdev,
 	dev->set_multicast_list = gfar_set_multi;
 
 	dev->ethtool_ops = &gfar_ethtool_ops;
+	dev->do_ioctl = gfar_ioctl;
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
 		priv->rx_csum_enable = 1;
-- 
GitLab


From fe96aaa14f553f0eb7af0e3502563a5400c65257 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Fri, 9 Jan 2009 11:13:14 +0000
Subject: [PATCH 093/492] netdev: add missing set_mac_address hook

Many drivers lost the ability to set ethernet address accidently
during the net_device_ops conversion.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/3c503.c          | 1 +
 drivers/net/8139cp.c         | 2 ++
 drivers/net/8139too.c        | 2 +-
 drivers/net/8390.c           | 1 +
 drivers/net/8390p.c          | 1 +
 drivers/net/arm/etherh.c     | 1 +
 drivers/net/e2100.c          | 1 +
 drivers/net/enic/enic_main.c | 1 +
 drivers/net/hamachi.c        | 1 +
 drivers/net/hp-plus.c        | 1 +
 drivers/net/hydra.c          | 1 +
 drivers/net/mac8390.c        | 1 +
 drivers/net/ne-h8300.c       | 1 +
 drivers/net/ne2k-pci.c       | 1 +
 drivers/net/ns83820.c        | 1 +
 drivers/net/r6040.c          | 1 +
 drivers/net/sc92031.c        | 1 +
 drivers/net/sis900.c         | 1 +
 drivers/net/smc-mca.c        | 1 +
 drivers/net/smc-ultra.c      | 1 +
 drivers/net/smsc911x.c       | 1 +
 drivers/net/smsc9420.c       | 1 +
 drivers/net/via-rhine.c      | 1 +
 drivers/net/via-velocity.c   | 1 +
 drivers/net/wd.c             | 1 +
 drivers/net/yellowfin.c      | 1 +
 drivers/net/zorro8390.c      | 1 +
 27 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/net/3c503.c b/drivers/net/3c503.c
index c092c392922..5b91a85fe10 100644
--- a/drivers/net/3c503.c
+++ b/drivers/net/3c503.c
@@ -177,6 +177,7 @@ static const struct net_device_ops el2_netdev_ops = {
 	.ndo_get_stats		= eip_get_stats,
 	.ndo_set_multicast_list = eip_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller 	= eip_poll,
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index dd7ac8290ae..4e19ae3ce6b 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -1821,6 +1821,7 @@ static const struct net_device_ops cp_netdev_ops = {
 	.ndo_open		= cp_open,
 	.ndo_stop		= cp_close,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_set_multicast_list	= cp_set_rx_mode,
 	.ndo_get_stats		= cp_get_stats,
 	.ndo_do_ioctl		= cp_ioctl,
@@ -1832,6 +1833,7 @@ static const struct net_device_ops cp_netdev_ops = {
 #ifdef BROKEN
 	.ndo_change_mtu		= cp_change_mtu,
 #endif
+
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= cp_poll_controller,
 #endif
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index fe370f80579..a5b24202d56 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -917,6 +917,7 @@ static const struct net_device_ops rtl8139_netdev_ops = {
 	.ndo_stop		= rtl8139_close,
 	.ndo_get_stats		= rtl8139_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_start_xmit		= rtl8139_start_xmit,
 	.ndo_set_multicast_list	= rtl8139_set_rx_mode,
 	.ndo_do_ioctl		= netdev_ioctl,
@@ -924,7 +925,6 @@ static const struct net_device_ops rtl8139_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= rtl8139_poll_controller,
 #endif
-
 };
 
 static int __devinit rtl8139_init_one (struct pci_dev *pdev,
diff --git a/drivers/net/8390.c b/drivers/net/8390.c
index fbe609a51e0..ec3e22e6306 100644
--- a/drivers/net/8390.c
+++ b/drivers/net/8390.c
@@ -63,6 +63,7 @@ const struct net_device_ops ei_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ei_poll,
diff --git a/drivers/net/8390p.c b/drivers/net/8390p.c
index ee70b358a81..da863c91d1d 100644
--- a/drivers/net/8390p.c
+++ b/drivers/net/8390p.c
@@ -68,6 +68,7 @@ const struct net_device_ops eip_netdev_ops = {
 	.ndo_get_stats		= eip_get_stats,
 	.ndo_set_multicast_list = eip_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= eip_poll,
diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 6278606d104..745ac188bab 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -646,6 +646,7 @@ static const struct net_device_ops etherh_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_addr	= eth_set_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ei_poll,
diff --git a/drivers/net/e2100.c b/drivers/net/e2100.c
index 20eb05cddb8..b07ba1924de 100644
--- a/drivers/net/e2100.c
+++ b/drivers/net/e2100.c
@@ -169,6 +169,7 @@ static const struct net_device_ops e21_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller 	= ei_poll,
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index d039e16f276..7d60551d538 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -1599,6 +1599,7 @@ static const struct net_device_ops enic_netdev_ops = {
 	.ndo_start_xmit		= enic_hard_start_xmit,
 	.ndo_get_stats		= enic_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_set_multicast_list	= enic_set_multicast_list,
 	.ndo_change_mtu		= enic_change_mtu,
 	.ndo_vlan_rx_register	= enic_vlan_rx_register,
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 32200227c92..7e8b3c59a7d 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -576,6 +576,7 @@ static const struct net_device_ops hamachi_netdev_ops = {
 	.ndo_set_multicast_list	= set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_tx_timeout		= hamachi_tx_timeout,
 	.ndo_do_ioctl		= netdev_ioctl,
 };
diff --git a/drivers/net/hp-plus.c b/drivers/net/hp-plus.c
index b507dbc16e6..5e070f44663 100644
--- a/drivers/net/hp-plus.c
+++ b/drivers/net/hp-plus.c
@@ -166,6 +166,7 @@ static const struct net_device_ops hpp_netdev_ops = {
 	.ndo_get_stats		= eip_get_stats,
 	.ndo_set_multicast_list = eip_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= eip_poll,
diff --git a/drivers/net/hydra.c b/drivers/net/hydra.c
index 9cb38a8d438..8ac0930c183 100644
--- a/drivers/net/hydra.c
+++ b/drivers/net/hydra.c
@@ -103,6 +103,7 @@ static const struct net_device_ops hydra_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ei_poll,
diff --git a/drivers/net/mac8390.c b/drivers/net/mac8390.c
index 57716e22660..8e884869a05 100644
--- a/drivers/net/mac8390.c
+++ b/drivers/net/mac8390.c
@@ -486,6 +486,7 @@ static const struct net_device_ops mac8390_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ei_poll,
diff --git a/drivers/net/ne-h8300.c b/drivers/net/ne-h8300.c
index b5723917104..7bd6662d5b0 100644
--- a/drivers/net/ne-h8300.c
+++ b/drivers/net/ne-h8300.c
@@ -202,6 +202,7 @@ static const struct net_device_ops ne_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ei_poll,
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index 62f20ba211c..f090d3b9ec9 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -208,6 +208,7 @@ static const struct net_device_ops ne2k_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller = ei_poll,
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index 42021aca1dd..e80294d8cc1 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -1956,6 +1956,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_change_mtu		= ns83820_change_mtu,
 	.ndo_set_multicast_list = ns83820_set_multicast,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_tx_timeout		= ns83820_tx_timeout,
 #ifdef NS83820_VLAN_ACCEL_SUPPORT
 	.ndo_vlan_rx_register	= ns83820_vlan_rx_register,
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 454e7dea0bc..72fd9e97c19 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -1059,6 +1059,7 @@ static const struct net_device_ops r6040_netdev_ops = {
 	.ndo_set_multicast_list = r6040_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_do_ioctl		= r6040_ioctl,
 	.ndo_tx_timeout		= r6040_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 42fd3127660..8b75bef4a84 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -1408,6 +1408,7 @@ static const struct net_device_ops sc92031_netdev_ops = {
 	.ndo_set_multicast_list	= sc92031_set_multicast_list,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_tx_timeout		= sc92031_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= sc92031_poll_controller,
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 4acd41a093a..6cbefcae9ac 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -389,6 +389,7 @@ static const struct net_device_ops sis900_netdev_ops = {
 	.ndo_set_multicast_list	= set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_do_ioctl		= mii_ioctl,
 	.ndo_tx_timeout		= sis900_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/smc-mca.c b/drivers/net/smc-mca.c
index 404b80e5ba1..8d36d40649e 100644
--- a/drivers/net/smc-mca.c
+++ b/drivers/net/smc-mca.c
@@ -192,6 +192,7 @@ static const struct net_device_ops ultramca_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller 	= ei_poll,
diff --git a/drivers/net/smc-ultra.c b/drivers/net/smc-ultra.c
index b3866089a20..2033fee3143 100644
--- a/drivers/net/smc-ultra.c
+++ b/drivers/net/smc-ultra.c
@@ -196,6 +196,7 @@ static const struct net_device_ops ultra_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller 	= ei_poll,
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index dc3f1108884..020c5830c37 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1740,6 +1740,7 @@ static const struct net_device_ops smsc911x_netdev_ops = {
 	.ndo_set_multicast_list	= smsc911x_set_multicast_list,
 	.ndo_do_ioctl		= smsc911x_do_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= smsc911x_poll_controller,
 #endif
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index 27e017d9696..c14a4c6452c 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -1551,6 +1551,7 @@ static const struct net_device_ops smsc9420_netdev_ops = {
 	.ndo_set_multicast_list	= smsc9420_set_multicast_list,
 	.ndo_do_ioctl		= smsc9420_do_ioctl,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= smsc9420_poll_controller,
 #endif /* CONFIG_NET_POLL_CONTROLLER */
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index ac07cc6e3cb..3b8e6325427 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -622,6 +622,7 @@ static const struct net_device_ops rhine_netdev_ops = {
 	.ndo_get_stats		 = rhine_get_stats,
 	.ndo_set_multicast_list	 = rhine_set_rx_mode,
 	.ndo_validate_addr	 = eth_validate_addr,
+	.ndo_set_mac_address 	 = eth_mac_addr,
 	.ndo_do_ioctl		 = netdev_ioctl,
 	.ndo_tx_timeout 	 = rhine_tx_timeout,
 #ifdef CONFIG_NET_POLL_CONTROLLER
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 58e25d090ae..a75f91dc315 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -855,6 +855,7 @@ static const struct net_device_ops velocity_netdev_ops = {
 	.ndo_start_xmit		= velocity_xmit,
 	.ndo_get_stats		= velocity_get_stats,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_set_multicast_list	= velocity_set_multi,
 	.ndo_change_mtu		= velocity_change_mtu,
 	.ndo_do_ioctl		= velocity_ioctl,
diff --git a/drivers/net/wd.c b/drivers/net/wd.c
index 3c1edda08d3..d8322d2d1e2 100644
--- a/drivers/net/wd.c
+++ b/drivers/net/wd.c
@@ -155,6 +155,7 @@ static const struct net_device_ops wd_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller 	= ei_poll,
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index cf971292277..2f1645dcb8c 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -362,6 +362,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_set_multicast_list = set_rx_mode,
 	.ndo_change_mtu		= eth_change_mtu,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_do_ioctl 		= netdev_ioctl,
 	.ndo_tx_timeout 	= yellowfin_tx_timeout,
 };
diff --git a/drivers/net/zorro8390.c b/drivers/net/zorro8390.c
index affd904deaf..37c84e3b8be 100644
--- a/drivers/net/zorro8390.c
+++ b/drivers/net/zorro8390.c
@@ -147,6 +147,7 @@ static const struct net_device_ops zorro8390_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ei_poll,
-- 
GitLab


From 52255bbe3551e481b7af423406ca229a13990b1c Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Fri, 9 Jan 2009 10:45:37 +0000
Subject: [PATCH 094/492] netdev: missing validate_address hooks

Some devices were converted incorrectly and are missing the validate
address hooks.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/acenic.c         | 1 +
 drivers/net/arm/ks8695net.c  | 1 +
 drivers/net/mlx4/en_netdev.c | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 5b396ff6c83..9589d620639 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -460,6 +460,7 @@ static const struct net_device_ops ace_netdev_ops = {
 	.ndo_get_stats		= ace_get_stats,
 	.ndo_start_xmit		= ace_start_xmit,
 	.ndo_set_multicast_list	= ace_set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_mac_address	= ace_set_mac_addr,
 	.ndo_change_mtu		= ace_change_mtu,
 #if ACENIC_DO_VLAN
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 9ad22d1b00f..1cf2f949c0b 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -1357,6 +1357,7 @@ static const struct net_device_ops ks8695_netdev_ops = {
 	.ndo_start_xmit		= ks8695_start_xmit,
 	.ndo_tx_timeout		= ks8695_timeout,
 	.ndo_set_mac_address	= ks8695_set_mac,
+	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_set_multicast_list	= ks8695_set_multicast,
 };
 
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 15bb38d9930..9f6644a4403 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -952,6 +952,7 @@ static const struct net_device_ops mlx4_netdev_ops = {
 	.ndo_get_stats		= mlx4_en_get_stats,
 	.ndo_set_multicast_list	= mlx4_en_set_multicast,
 	.ndo_set_mac_address	= mlx4_en_set_mac,
+	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_change_mtu		= mlx4_en_change_mtu,
 	.ndo_tx_timeout		= mlx4_en_tx_timeout,
 	.ndo_vlan_rx_register	= mlx4_en_vlan_rx_register,
-- 
GitLab


From 001eb84bbf7205f8cc541a75364a6a0892b5d0a2 Mon Sep 17 00:00:00 2001
From: Ayaz Abdulla <aabdulla@nvidia.com>
Date: Fri, 9 Jan 2009 11:03:44 +0000
Subject: [PATCH 095/492] forcedeth: xmit lock fix

This patch fixes a potential race condition between xmit thread and xmit
completion thread. The calculation of empty tx descriptors is not
performed under the lock. This could cause it to set the stop flag while
the completion thread finishes all tx's. This will result in the tx
queue in stopped state and no one to wake it up.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/forcedeth.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 5b68dc20168..6905ec9467d 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -2096,14 +2096,15 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 			   ((skb_shinfo(skb)->frags[i].size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
 	}
 
+	spin_lock_irqsave(&np->lock, flags);
 	empty_slots = nv_get_empty_tx_slots(np);
 	if (unlikely(empty_slots <= entries)) {
-		spin_lock_irqsave(&np->lock, flags);
 		netif_stop_queue(dev);
 		np->tx_stop = 1;
 		spin_unlock_irqrestore(&np->lock, flags);
 		return NETDEV_TX_BUSY;
 	}
+	spin_unlock_irqrestore(&np->lock, flags);
 
 	start_tx = put_tx = np->put_tx.orig;
 
@@ -2214,14 +2215,15 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
 			   ((skb_shinfo(skb)->frags[i].size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
 	}
 
+	spin_lock_irqsave(&np->lock, flags);
 	empty_slots = nv_get_empty_tx_slots(np);
 	if (unlikely(empty_slots <= entries)) {
-		spin_lock_irqsave(&np->lock, flags);
 		netif_stop_queue(dev);
 		np->tx_stop = 1;
 		spin_unlock_irqrestore(&np->lock, flags);
 		return NETDEV_TX_BUSY;
 	}
+	spin_unlock_irqrestore(&np->lock, flags);
 
 	start_tx = put_tx = np->put_tx.ex;
 	start_tx_ctx = np->put_tx_ctx;
-- 
GitLab


From f1405d32e392f2f5f80f4687fe186305de300bf6 Mon Sep 17 00:00:00 2001
From: Ayaz Abdulla <aabdulla@nvidia.com>
Date: Fri, 9 Jan 2009 11:03:54 +0000
Subject: [PATCH 096/492] forcedeth: version bump and copyright

This patch bumps up the version number and adds current year to copyright.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/forcedeth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 6905ec9467d..37a6e956f0b 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -13,7 +13,7 @@
  * Copyright (C) 2004 Andrew de Quincey (wol support)
  * Copyright (C) 2004 Carl-Daniel Hailfinger (invalid MAC handling, insane
  *		IRQ rate fixes, bigendian fixes, cleanups, verification)
- * Copyright (c) 2004,2005,2006,2007,2008 NVIDIA Corporation
+ * Copyright (c) 2004,2005,2006,2007,2008,2009 NVIDIA Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -39,7 +39,7 @@
  * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
  * superfluous timer interrupts from the nic.
  */
-#define FORCEDETH_VERSION		"0.61"
+#define FORCEDETH_VERSION		"0.62"
 #define DRV_NAME			"forcedeth"
 
 #include <linux/module.h>
-- 
GitLab


From ba7cd3ba97f81564be3e4a4ee8ee17726aa853d7 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 9 Jan 2009 11:31:49 +0000
Subject: [PATCH 097/492] qlge: Get rid of volatile usage for shadow register.

Putting back ql_read_sh_reg() function and using rmb() instead of
volatile.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h      | 22 ++++++++++++++++++++--
 drivers/net/qlge/qlge_dbg.c  | 14 ++++++++------
 drivers/net/qlge/qlge_main.c | 12 ++++++------
 3 files changed, 34 insertions(+), 14 deletions(-)

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 459663a4023..4cb3647bb1b 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -1145,7 +1145,7 @@ struct tx_ring {
 	struct wqicb wqicb;	/* structure used to inform chip of new queue */
 	void *wq_base;		/* pci_alloc:virtual addr for tx */
 	dma_addr_t wq_base_dma;	/* pci_alloc:dma addr for tx */
-	u32 *cnsmr_idx_sh_reg;	/* shadow copy of consumer idx */
+	__le32 *cnsmr_idx_sh_reg;	/* shadow copy of consumer idx */
 	dma_addr_t cnsmr_idx_sh_reg_dma;	/* dma-shadow copy of consumer */
 	u32 wq_size;		/* size in bytes of queue area */
 	u32 wq_len;		/* number of entries in queue */
@@ -1181,7 +1181,7 @@ struct rx_ring {
 	u32 cq_size;
 	u32 cq_len;
 	u16 cq_id;
-	volatile __le32 *prod_idx_sh_reg;	/* Shadowed producer register. */
+	__le32 *prod_idx_sh_reg;	/* Shadowed producer register. */
 	dma_addr_t prod_idx_sh_reg_dma;
 	void __iomem *cnsmr_idx_db_reg;	/* PCI doorbell mem area + 0 */
 	u32 cnsmr_idx;		/* current sw idx */
@@ -1459,6 +1459,24 @@ static inline void ql_write_db_reg(u32 val, void __iomem *addr)
 	mmiowb();
 }
 
+/*
+ * Shadow Registers:
+ * Outbound queues have a consumer index that is maintained by the chip.
+ * Inbound queues have a producer index that is maintained by the chip.
+ * For lower overhead, these registers are "shadowed" to host memory
+ * which allows the device driver to track the queue progress without
+ * PCI reads. When an entry is placed on an inbound queue, the chip will
+ * update the relevant index register and then copy the value to the
+ * shadow register in host memory.
+ */
+static inline u32 ql_read_sh_reg(__le32  *addr)
+{
+	u32 reg;
+	reg =  le32_to_cpu(*addr);
+	rmb();
+	return reg;
+}
+
 extern char qlge_driver_name[];
 extern const char qlge_driver_version[];
 extern const struct ethtool_ops qlge_ethtool_ops;
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index 3f5e02d2e4a..e705ea5b975 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -455,10 +455,11 @@ void ql_dump_tx_ring(struct tx_ring *tx_ring)
 	printk(KERN_ERR PFX "tx_ring->base = %p.\n", tx_ring->wq_base);
 	printk(KERN_ERR PFX "tx_ring->base_dma = 0x%llx.\n",
 	       (unsigned long long) tx_ring->wq_base_dma);
-	printk(KERN_ERR PFX "tx_ring->cnsmr_idx_sh_reg = %p.\n",
-	       tx_ring->cnsmr_idx_sh_reg);
-	printk(KERN_ERR PFX "tx_ring->cnsmr_idx_sh_reg_dma = 0x%llx.\n",
-	       (unsigned long long) tx_ring->cnsmr_idx_sh_reg_dma);
+	printk(KERN_ERR PFX
+	       "tx_ring->cnsmr_idx_sh_reg, addr = 0x%p, value = %d.\n",
+	       tx_ring->cnsmr_idx_sh_reg,
+	       tx_ring->cnsmr_idx_sh_reg
+			? ql_read_sh_reg(tx_ring->cnsmr_idx_sh_reg) : 0);
 	printk(KERN_ERR PFX "tx_ring->size = %d.\n", tx_ring->wq_size);
 	printk(KERN_ERR PFX "tx_ring->len = %d.\n", tx_ring->wq_len);
 	printk(KERN_ERR PFX "tx_ring->prod_idx_db_reg = %p.\n",
@@ -558,9 +559,10 @@ void ql_dump_rx_ring(struct rx_ring *rx_ring)
 	printk(KERN_ERR PFX "rx_ring->cq_size = %d.\n", rx_ring->cq_size);
 	printk(KERN_ERR PFX "rx_ring->cq_len = %d.\n", rx_ring->cq_len);
 	printk(KERN_ERR PFX
-	       "rx_ring->prod_idx_sh_reg, addr = %p, value = %d.\n",
+	       "rx_ring->prod_idx_sh_reg, addr = 0x%p, value = %d.\n",
 	       rx_ring->prod_idx_sh_reg,
-	       rx_ring->prod_idx_sh_reg ? *(rx_ring->prod_idx_sh_reg) : 0);
+	       rx_ring->prod_idx_sh_reg
+			? ql_read_sh_reg(rx_ring->prod_idx_sh_reg) : 0);
 	printk(KERN_ERR PFX "rx_ring->prod_idx_sh_reg_dma = %llx.\n",
 	       (unsigned long long) rx_ring->prod_idx_sh_reg_dma);
 	printk(KERN_ERR PFX "rx_ring->cnsmr_idx_db_reg = %p.\n",
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index b7e40add958..78df7d11cef 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -1545,7 +1545,7 @@ static void ql_process_chip_ae_intr(struct ql_adapter *qdev,
 static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring)
 {
 	struct ql_adapter *qdev = rx_ring->qdev;
-	u32 prod = le32_to_cpu(*rx_ring->prod_idx_sh_reg);
+	u32 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
 	struct ob_mac_iocb_rsp *net_rsp = NULL;
 	int count = 0;
 
@@ -1571,7 +1571,7 @@ static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring)
 		}
 		count++;
 		ql_update_cq(rx_ring);
-		prod = le32_to_cpu(*rx_ring->prod_idx_sh_reg);
+		prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
 	}
 	ql_write_cq_idx(rx_ring);
 	if (netif_queue_stopped(qdev->ndev) && net_rsp != NULL) {
@@ -1591,7 +1591,7 @@ static int ql_clean_outbound_rx_ring(struct rx_ring *rx_ring)
 static int ql_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget)
 {
 	struct ql_adapter *qdev = rx_ring->qdev;
-	u32 prod = le32_to_cpu(*rx_ring->prod_idx_sh_reg);
+	u32 prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
 	struct ql_net_rsp_iocb *net_rsp;
 	int count = 0;
 
@@ -1624,7 +1624,7 @@ static int ql_clean_inbound_rx_ring(struct rx_ring *rx_ring, int budget)
 		}
 		count++;
 		ql_update_cq(rx_ring);
-		prod = le32_to_cpu(*rx_ring->prod_idx_sh_reg);
+		prod = ql_read_sh_reg(rx_ring->prod_idx_sh_reg);
 		if (count == budget)
 			break;
 	}
@@ -1787,7 +1787,7 @@ static irqreturn_t qlge_isr(int irq, void *dev_id)
 	 * Check the default queue and wake handler if active.
 	 */
 	rx_ring = &qdev->rx_ring[0];
-	if (le32_to_cpu(*rx_ring->prod_idx_sh_reg) != rx_ring->cnsmr_idx) {
+	if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) != rx_ring->cnsmr_idx) {
 		QPRINTK(qdev, INTR, INFO, "Waking handler for rx_ring[0].\n");
 		ql_disable_completion_interrupt(qdev, intr_context->intr);
 		queue_delayed_work_on(smp_processor_id(), qdev->q_workqueue,
@@ -1801,7 +1801,7 @@ static irqreturn_t qlge_isr(int irq, void *dev_id)
 		 */
 		for (i = 1; i < qdev->rx_ring_count; i++) {
 			rx_ring = &qdev->rx_ring[i];
-			if (le32_to_cpu(*rx_ring->prod_idx_sh_reg) !=
+			if (ql_read_sh_reg(rx_ring->prod_idx_sh_reg) !=
 			    rx_ring->cnsmr_idx) {
 				QPRINTK(qdev, INTR, INFO,
 					"Waking handler for rx_ring[%d].\n", i);
-- 
GitLab


From 97345524392dcbe0157ce2a9d9a589e2022b1c15 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 9 Jan 2009 11:31:50 +0000
Subject: [PATCH 098/492] qlge: Get rid of split addresses in hardware control
 blocks.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h      | 24 ++++++------------
 drivers/net/qlge/qlge_dbg.c  | 48 ++++++++++++------------------------
 drivers/net/qlge/qlge_main.c | 26 ++++++-------------
 3 files changed, 32 insertions(+), 66 deletions(-)

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 4cb3647bb1b..96970023226 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -961,8 +961,7 @@ struct ib_mac_iocb_rsp {
 #define IB_MAC_IOCB_RSP_DS	0x40	/* data is in small buffer */
 #define IB_MAC_IOCB_RSP_DL	0x80	/* data is in large buffer */
 	__le32 data_len;	/* */
-	__le32 data_addr_lo;	/* */
-	__le32 data_addr_hi;	/* */
+	__le64 data_addr;	/* */
 	__le32 rss;		/* */
 	__le16 vlan_id;		/* 12 bits */
 #define IB_MAC_IOCB_RSP_C	0x1000	/* VLAN CFI bit */
@@ -976,8 +975,7 @@ struct ib_mac_iocb_rsp {
 #define IB_MAC_IOCB_RSP_HS	0x40
 #define IB_MAC_IOCB_RSP_HL	0x80
 	__le32 hdr_len;		/* */
-	__le32 hdr_addr_lo;	/* */
-	__le32 hdr_addr_hi;	/* */
+	__le64 hdr_addr;	/* */
 } __attribute((packed));
 
 struct ib_ae_iocb_rsp {
@@ -1042,10 +1040,8 @@ struct wqicb {
 	__le16 cq_id_rss;
 #define Q_CQ_ID_RSS_RV 0x8000
 	__le16 rid;
-	__le32 addr_lo;
-	__le32 addr_hi;
-	__le32 cnsmr_idx_addr_lo;
-	__le32 cnsmr_idx_addr_hi;
+	__le64 addr;
+	__le64 cnsmr_idx_addr;
 } __attribute((packed));
 
 /*
@@ -1070,18 +1066,14 @@ struct cqicb {
 #define LEN_CPP_64	0x0002
 #define LEN_CPP_128	0x0003
 	__le16 rid;
-	__le32 addr_lo;
-	__le32 addr_hi;
-	__le32 prod_idx_addr_lo;
-	__le32 prod_idx_addr_hi;
+	__le64 addr;
+	__le64 prod_idx_addr;
 	__le16 pkt_delay;
 	__le16 irq_delay;
-	__le32 lbq_addr_lo;
-	__le32 lbq_addr_hi;
+	__le64 lbq_addr;
 	__le16 lbq_buf_size;
 	__le16 lbq_len;		/* entry count */
-	__le32 sbq_addr_lo;
-	__le32 sbq_addr_hi;
+	__le64 sbq_addr;
 	__le16 sbq_buf_size;
 	__le16 sbq_len;		/* entry count */
 } __attribute((packed));
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index e705ea5b975..379b895ed6e 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -435,14 +435,10 @@ void ql_dump_wqicb(struct wqicb *wqicb)
 	printk(KERN_ERR PFX "wqicb->cq_id_rss = %d.\n",
 	       le16_to_cpu(wqicb->cq_id_rss));
 	printk(KERN_ERR PFX "wqicb->rid = 0x%x.\n", le16_to_cpu(wqicb->rid));
-	printk(KERN_ERR PFX "wqicb->wq_addr_lo = 0x%.08x.\n",
-	       le32_to_cpu(wqicb->addr_lo));
-	printk(KERN_ERR PFX "wqicb->wq_addr_hi = 0x%.08x.\n",
-	       le32_to_cpu(wqicb->addr_hi));
-	printk(KERN_ERR PFX "wqicb->wq_cnsmr_idx_addr_lo = 0x%.08x.\n",
-	       le32_to_cpu(wqicb->cnsmr_idx_addr_lo));
-	printk(KERN_ERR PFX "wqicb->wq_cnsmr_idx_addr_hi = 0x%.08x.\n",
-	       le32_to_cpu(wqicb->cnsmr_idx_addr_hi));
+	printk(KERN_ERR PFX "wqicb->wq_addr = 0x%llx.\n",
+	       (unsigned long long) le64_to_cpu(wqicb->addr));
+	printk(KERN_ERR PFX "wqicb->wq_cnsmr_idx_addr = 0x%llx.\n",
+	       (unsigned long long) le64_to_cpu(wqicb->cnsmr_idx_addr));
 }
 
 void ql_dump_tx_ring(struct tx_ring *tx_ring)
@@ -511,30 +507,22 @@ void ql_dump_cqicb(struct cqicb *cqicb)
 	printk(KERN_ERR PFX "cqicb->msix_vect = %d.\n", cqicb->msix_vect);
 	printk(KERN_ERR PFX "cqicb->flags = %x.\n", cqicb->flags);
 	printk(KERN_ERR PFX "cqicb->len = %d.\n", le16_to_cpu(cqicb->len));
-	printk(KERN_ERR PFX "cqicb->addr_lo = %x.\n",
-	       le32_to_cpu(cqicb->addr_lo));
-	printk(KERN_ERR PFX "cqicb->addr_hi = %x.\n",
-	       le32_to_cpu(cqicb->addr_hi));
-	printk(KERN_ERR PFX "cqicb->prod_idx_addr_lo = %x.\n",
-	       le32_to_cpu(cqicb->prod_idx_addr_lo));
-	printk(KERN_ERR PFX "cqicb->prod_idx_addr_hi = %x.\n",
-	       le32_to_cpu(cqicb->prod_idx_addr_hi));
+	printk(KERN_ERR PFX "cqicb->addr = 0x%llx.\n",
+	       (unsigned long long) le64_to_cpu(cqicb->addr));
+	printk(KERN_ERR PFX "cqicb->prod_idx_addr = 0x%llx.\n",
+	       (unsigned long long) le64_to_cpu(cqicb->prod_idx_addr));
 	printk(KERN_ERR PFX "cqicb->pkt_delay = 0x%.04x.\n",
 	       le16_to_cpu(cqicb->pkt_delay));
 	printk(KERN_ERR PFX "cqicb->irq_delay = 0x%.04x.\n",
 	       le16_to_cpu(cqicb->irq_delay));
-	printk(KERN_ERR PFX "cqicb->lbq_addr_lo = %x.\n",
-	       le32_to_cpu(cqicb->lbq_addr_lo));
-	printk(KERN_ERR PFX "cqicb->lbq_addr_hi = %x.\n",
-	       le32_to_cpu(cqicb->lbq_addr_hi));
+	printk(KERN_ERR PFX "cqicb->lbq_addr = 0x%llx.\n",
+	       (unsigned long long) le64_to_cpu(cqicb->lbq_addr));
 	printk(KERN_ERR PFX "cqicb->lbq_buf_size = 0x%.04x.\n",
 	       le16_to_cpu(cqicb->lbq_buf_size));
 	printk(KERN_ERR PFX "cqicb->lbq_len = 0x%.04x.\n",
 	       le16_to_cpu(cqicb->lbq_len));
-	printk(KERN_ERR PFX "cqicb->sbq_addr_lo = %x.\n",
-	       le32_to_cpu(cqicb->sbq_addr_lo));
-	printk(KERN_ERR PFX "cqicb->sbq_addr_hi = %x.\n",
-	       le32_to_cpu(cqicb->sbq_addr_hi));
+	printk(KERN_ERR PFX "cqicb->sbq_addr = 0x%llx.\n",
+	       (unsigned long long) le64_to_cpu(cqicb->sbq_addr));
 	printk(KERN_ERR PFX "cqicb->sbq_buf_size = 0x%.04x.\n",
 	       le16_to_cpu(cqicb->sbq_buf_size));
 	printk(KERN_ERR PFX "cqicb->sbq_len = 0x%.04x.\n",
@@ -811,10 +799,8 @@ void ql_dump_ib_mac_rsp(struct ib_mac_iocb_rsp *ib_mac_rsp)
 
 	printk(KERN_ERR PFX "data_len	= %d\n",
 	       le32_to_cpu(ib_mac_rsp->data_len));
-	printk(KERN_ERR PFX "data_addr_hi    = 0x%x\n",
-	       le32_to_cpu(ib_mac_rsp->data_addr_hi));
-	printk(KERN_ERR PFX "data_addr_lo    = 0x%x\n",
-	       le32_to_cpu(ib_mac_rsp->data_addr_lo));
+	printk(KERN_ERR PFX "data_addr    = 0x%llx\n",
+	       (unsigned long long) le64_to_cpu(ib_mac_rsp->data_addr));
 	if (ib_mac_rsp->flags3 & IB_MAC_IOCB_RSP_RSS_MASK)
 		printk(KERN_ERR PFX "rss    = %x\n",
 		       le32_to_cpu(ib_mac_rsp->rss));
@@ -830,10 +816,8 @@ void ql_dump_ib_mac_rsp(struct ib_mac_iocb_rsp *ib_mac_rsp)
 	if (ib_mac_rsp->flags4 & IB_MAC_IOCB_RSP_HV) {
 		printk(KERN_ERR PFX "hdr length	= %d.\n",
 		       le32_to_cpu(ib_mac_rsp->hdr_len));
-		printk(KERN_ERR PFX "hdr addr_hi    = 0x%x.\n",
-		       le32_to_cpu(ib_mac_rsp->hdr_addr_hi));
-		printk(KERN_ERR PFX "hdr addr_lo    = 0x%x.\n",
-		       le32_to_cpu(ib_mac_rsp->hdr_addr_lo));
+		printk(KERN_ERR PFX "hdr addr    = 0x%llx.\n",
+		       (unsigned long long) le64_to_cpu(ib_mac_rsp->hdr_addr));
 	}
 }
 #endif
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 78df7d11cef..33bbdcefe0a 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -2467,12 +2467,9 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	bq_len = (rx_ring->cq_len == 65536) ? 0 : (u16) rx_ring->cq_len;
 	cqicb->len = cpu_to_le16(bq_len | LEN_V | LEN_CPP_CONT);
 
-	cqicb->addr_lo = cpu_to_le32(rx_ring->cq_base_dma);
-	cqicb->addr_hi = cpu_to_le32((u64) rx_ring->cq_base_dma >> 32);
+	cqicb->addr = cpu_to_le64(rx_ring->cq_base_dma);
 
-	cqicb->prod_idx_addr_lo = cpu_to_le32(rx_ring->prod_idx_sh_reg_dma);
-	cqicb->prod_idx_addr_hi =
-	    cpu_to_le32((u64) rx_ring->prod_idx_sh_reg_dma >> 32);
+	cqicb->prod_idx_addr = cpu_to_le64(rx_ring->prod_idx_sh_reg_dma);
 
 	/*
 	 * Set up the control block load flags.
@@ -2483,10 +2480,8 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	if (rx_ring->lbq_len) {
 		cqicb->flags |= FLAGS_LL;	/* Load lbq values */
 		*((u64 *) rx_ring->lbq_base_indirect) = rx_ring->lbq_base_dma;
-		cqicb->lbq_addr_lo =
-		    cpu_to_le32(rx_ring->lbq_base_indirect_dma);
-		cqicb->lbq_addr_hi =
-		    cpu_to_le32((u64) rx_ring->lbq_base_indirect_dma >> 32);
+		cqicb->lbq_addr =
+		    cpu_to_le64(rx_ring->lbq_base_indirect_dma);
 		bq_len = (rx_ring->lbq_buf_size == 65536) ? 0 :
 			(u16) rx_ring->lbq_buf_size;
 		cqicb->lbq_buf_size = cpu_to_le16(bq_len);
@@ -2501,10 +2496,8 @@ static int ql_start_rx_ring(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 	if (rx_ring->sbq_len) {
 		cqicb->flags |= FLAGS_LS;	/* Load sbq values */
 		*((u64 *) rx_ring->sbq_base_indirect) = rx_ring->sbq_base_dma;
-		cqicb->sbq_addr_lo =
-		    cpu_to_le32(rx_ring->sbq_base_indirect_dma);
-		cqicb->sbq_addr_hi =
-		    cpu_to_le32((u64) rx_ring->sbq_base_indirect_dma >> 32);
+		cqicb->sbq_addr =
+		    cpu_to_le64(rx_ring->sbq_base_indirect_dma);
 		cqicb->sbq_buf_size =
 		    cpu_to_le16(((rx_ring->sbq_buf_size / 2) + 8) & 0xfffffff8);
 		bq_len = (rx_ring->sbq_len == 65536) ? 0 :
@@ -2611,12 +2604,9 @@ static int ql_start_tx_ring(struct ql_adapter *qdev, struct tx_ring *tx_ring)
 				   Q_FLAGS_LB | Q_FLAGS_LI | Q_FLAGS_LO);
 	wqicb->cq_id_rss = cpu_to_le16(tx_ring->cq_id);
 	wqicb->rid = 0;
-	wqicb->addr_lo = cpu_to_le32(tx_ring->wq_base_dma);
-	wqicb->addr_hi = cpu_to_le32((u64) tx_ring->wq_base_dma >> 32);
+	wqicb->addr = cpu_to_le64(tx_ring->wq_base_dma);
 
-	wqicb->cnsmr_idx_addr_lo = cpu_to_le32(tx_ring->cnsmr_idx_sh_reg_dma);
-	wqicb->cnsmr_idx_addr_hi =
-	    cpu_to_le32((u64) tx_ring->cnsmr_idx_sh_reg_dma >> 32);
+	wqicb->cnsmr_idx_addr = cpu_to_le64(tx_ring->cnsmr_idx_sh_reg_dma);
 
 	ql_init_tx_ring(qdev, tx_ring);
 
-- 
GitLab


From 697cdc46801d1106a25d27a8225cb925f0a7f5aa Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 9 Jan 2009 11:31:51 +0000
Subject: [PATCH 099/492] qlge: Remove support for device ID 8000.

Support for dev id 8000 is pushed out until 2.6.30.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h      | 3 +--
 drivers/net/qlge/qlge_main.c | 1 -
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 96970023226..a5095343eb1 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -28,8 +28,7 @@
        } while (0)
 
 #define QLGE_VENDOR_ID    0x1077
-#define QLGE_DEVICE_ID1    0x8012
-#define QLGE_DEVICE_ID   0x8000
+#define QLGE_DEVICE_ID    0x8012
 
 #define MAX_RX_RINGS 128
 #define MAX_TX_RINGS 128
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 33bbdcefe0a..9931cf7b6ad 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -76,7 +76,6 @@ MODULE_PARM_DESC(irq_type, "0 = MSI-X, 1 = MSI, 2 = Legacy.");
 
 static struct pci_device_id qlge_pci_tbl[] __devinitdata = {
 	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID)},
-	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QLGE_DEVICE_ID1)},
 	/* required last entry */
 	{0,}
 };
-- 
GitLab


From 0857e9d73feea0125280dcd431cee84f6cb3b4e2 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 9 Jan 2009 11:31:52 +0000
Subject: [PATCH 100/492] qlge: Fix schedule while atomic issue.

There is no need to sleep while waiting for the hardware
semaphore to become available.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge_main.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 9931cf7b6ad..543a4135ae0 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -126,12 +126,12 @@ static int ql_sem_trylock(struct ql_adapter *qdev, u32 sem_mask)
 
 int ql_sem_spinlock(struct ql_adapter *qdev, u32 sem_mask)
 {
-	unsigned int seconds = 3;
+	unsigned int wait_count = 30;
 	do {
 		if (!ql_sem_trylock(qdev, sem_mask))
 			return 0;
-		ssleep(1);
-	} while (--seconds);
+		udelay(100);
+	} while (--wait_count);
 	return -ETIMEDOUT;
 }
 
-- 
GitLab


From 683d46a9798c382220ef282b37f8210b5276cb3a Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Fri, 9 Jan 2009 11:31:53 +0000
Subject: [PATCH 101/492] qlge: Remove dynamic alloc of rx ring control blocks.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/qlge/qlge.h      | 12 ++++++++----
 drivers/net/qlge/qlge_main.c | 31 ++-----------------------------
 2 files changed, 10 insertions(+), 33 deletions(-)

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index a5095343eb1..c1dadadfab1 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -30,8 +30,9 @@
 #define QLGE_VENDOR_ID    0x1077
 #define QLGE_DEVICE_ID    0x8012
 
-#define MAX_RX_RINGS 128
-#define MAX_TX_RINGS 128
+#define MAX_CPUS 8
+#define MAX_TX_RINGS MAX_CPUS
+#define MAX_RX_RINGS ((MAX_CPUS * 2) + 1)
 
 #define NUM_TX_RING_ENTRIES	256
 #define NUM_RX_RING_ENTRIES	256
@@ -44,6 +45,7 @@
 #define MAX_SPLIT_SIZE 1023
 #define QLGE_SB_PAD 32
 
+#define MAX_CQ 128
 #define DFLT_COALESCE_WAIT 100	/* 100 usec wait for coalescing */
 #define MAX_INTER_FRAME_WAIT 10	/* 10 usec max interframe-wait for coalescing */
 #define DFLT_INTER_FRAME_WAIT (MAX_INTER_FRAME_WAIT/2)
@@ -1393,9 +1395,11 @@ struct ql_adapter {
 	int rx_ring_count;
 	int ring_mem_size;
 	void *ring_mem;
-	struct rx_ring *rx_ring;
+
+	struct rx_ring rx_ring[MAX_RX_RINGS];
+	struct tx_ring tx_ring[MAX_TX_RINGS];
+
 	int rx_csum;
-	struct tx_ring *tx_ring;
 	u32 default_rx_queue;
 
 	u16 rx_coalesce_usecs;	/* cqicb->int_delay */
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 543a4135ae0..45421c8b601 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -2355,28 +2355,6 @@ static void ql_tx_ring_clean(struct ql_adapter *qdev)
 	}
 }
 
-static void ql_free_ring_cb(struct ql_adapter *qdev)
-{
-	kfree(qdev->ring_mem);
-}
-
-static int ql_alloc_ring_cb(struct ql_adapter *qdev)
-{
-	/* Allocate space for tx/rx ring control blocks. */
-	qdev->ring_mem_size =
-	    (qdev->tx_ring_count * sizeof(struct tx_ring)) +
-	    (qdev->rx_ring_count * sizeof(struct rx_ring));
-	qdev->ring_mem = kmalloc(qdev->ring_mem_size, GFP_KERNEL);
-	if (qdev->ring_mem == NULL) {
-		return -ENOMEM;
-	} else {
-		qdev->rx_ring = qdev->ring_mem;
-		qdev->tx_ring = qdev->ring_mem +
-		    (qdev->rx_ring_count * sizeof(struct rx_ring));
-	}
-	return 0;
-}
-
 static void ql_free_mem_resources(struct ql_adapter *qdev)
 {
 	int i;
@@ -3236,7 +3214,6 @@ static int qlge_close(struct net_device *ndev)
 		msleep(1);
 	ql_adapter_down(qdev);
 	ql_release_adapter_resources(qdev);
-	ql_free_ring_cb(qdev);
 	return 0;
 }
 
@@ -3262,8 +3239,8 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 	 * This limitation can be removed when requested.
 	 */
 
-	if (cpu_cnt > 8)
-		cpu_cnt = 8;
+	if (cpu_cnt > MAX_CPUS)
+		cpu_cnt = MAX_CPUS;
 
 	/*
 	 * rx_ring[0] is always the default queue.
@@ -3283,9 +3260,6 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 	 */
 	qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count + 1;
 
-	if (ql_alloc_ring_cb(qdev))
-		return -ENOMEM;
-
 	for (i = 0; i < qdev->tx_ring_count; i++) {
 		tx_ring = &qdev->tx_ring[i];
 		memset((void *)tx_ring, 0, sizeof(tx_ring));
@@ -3382,7 +3356,6 @@ static int qlge_open(struct net_device *ndev)
 
 error_up:
 	ql_release_adapter_resources(qdev);
-	ql_free_ring_cb(qdev);
 	return err;
 }
 
-- 
GitLab


From a7ee2f73f3ce90d73736de1cf432339c35a3faf2 Mon Sep 17 00:00:00 2001
From: Ayaz Abdulla <aabdulla@nvidia.com>
Date: Fri, 9 Jan 2009 22:40:06 -0800
Subject: [PATCH 102/492] forcedeth: remove mgmt unit for mcp79 chipset

This patch removes the feature flag for mgmt unit as it is not used for
this chipset.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/forcedeth.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 37a6e956f0b..e06782a60bd 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -6169,19 +6169,19 @@ static struct pci_device_id pci_tbl[] = {
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36),
-		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{	/* MCP79 Ethernet Controller */
 		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39),
-		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V3|DEV_HAS_TEST_EXTENDED|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
 	},
 	{0,},
 };
-- 
GitLab


From 1b6725dea766b7437d885661140b6e0340d47613 Mon Sep 17 00:00:00 2001
From: Leonardo Potenza <lpotenza@inwind.it>
Date: Fri, 9 Jan 2009 23:06:28 -0800
Subject: [PATCH 103/492] net: fix section mismatch warnings in
 dccp/ccids/lib/tfrc.c

Removed the __exit annotation of tfrc_lib_exit(), in order to suppress the following section mismatch messages:

WARNING: net/dccp/dccp.o(.text+0xd9): Section mismatch in reference from the function ccid_cleanup_builtins() to the function .exit.text:tfrc_lib_exit()
The function ccid_cleanup_builtins() references a function in an exit section.
Often the function tfrc_lib_exit() has valid usage outside the exit section
and the fix is to remove the __exit annotation of tfrc_lib_exit.

WARNING: net/dccp/dccp.o(.init.text+0x48): Section mismatch in reference from the function ccid_initialize_builtins() to the function .exit.text:tfrc_lib_exit()
The function __init ccid_initialize_builtins() references
a function __exit tfrc_lib_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
tfrc_lib_exit() so it may be used outside an exit section.

Signed-off-by: Leonardo Potenza <lpotenza@inwind.it>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/dccp/ccids/lib/tfrc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/dccp/ccids/lib/tfrc.c b/net/dccp/ccids/lib/tfrc.c
index 60c412ccfee..4902029854d 100644
--- a/net/dccp/ccids/lib/tfrc.c
+++ b/net/dccp/ccids/lib/tfrc.c
@@ -36,7 +36,7 @@ out:
 	return rc;
 }
 
-void __exit tfrc_lib_exit(void)
+void tfrc_lib_exit(void)
 {
 	tfrc_rx_packet_history_exit();
 	tfrc_tx_packet_history_exit();
-- 
GitLab


From eb10a781824ca63c4e484c4642a19b3370980792 Mon Sep 17 00:00:00 2001
From: Ayaz Abdulla <aabdulla@nvidia.com>
Date: Sun, 11 Jan 2009 00:09:04 -0800
Subject: [PATCH 104/492] forcedeth: napi schedule lock fix

This patch fixes a potential race condition between scheduling napi and
completing napi poll. The call to netif_rx_schedule should be under
protection of the lock (as is the completion), otherwise, interrupts
could be masked off.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/forcedeth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index e06782a60bd..5b910cf6374 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3405,10 +3405,10 @@ static irqreturn_t nv_nic_irq(int foo, void *data)
 
 #ifdef CONFIG_FORCEDETH_NAPI
 		if (events & NVREG_IRQ_RX_ALL) {
+			spin_lock(&np->lock);
 			netif_rx_schedule(&np->napi);
 
 			/* Disable furthur receive irq's */
-			spin_lock(&np->lock);
 			np->irqmask &= ~NVREG_IRQ_RX_ALL;
 
 			if (np->msi_flags & NV_MSI_X_ENABLED)
@@ -3522,10 +3522,10 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data)
 
 #ifdef CONFIG_FORCEDETH_NAPI
 		if (events & NVREG_IRQ_RX_ALL) {
+			spin_lock(&np->lock);
 			netif_rx_schedule(&np->napi);
 
 			/* Disable furthur receive irq's */
-			spin_lock(&np->lock);
 			np->irqmask &= ~NVREG_IRQ_RX_ALL;
 
 			if (np->msi_flags & NV_MSI_X_ENABLED)
-- 
GitLab


From 702403af28ef647b090b49bb61abebb45150ce7f Mon Sep 17 00:00:00 2001
From: Steve Glendinning <steve.glendinning@smsc.com>
Date: Sun, 11 Jan 2009 00:14:27 -0800
Subject: [PATCH 105/492] smsc911x: fix smsc911x_reg_read compiler warning

if this code path is ever hit, the platform_data struct isn't properly
configured with a bus width flag so the device won't work (hence the
BUG()).

This patch adds a dummy return statement to eliminate this compiler
warning:

drivers/net/smsc911x.c: In function 'smsc911x_reg_read':
drivers/net/smsc911x.c:148: warning: control reaches end of non-void function

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/smsc911x.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 020c5830c37..fd3d2a7a1a2 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -144,6 +144,7 @@ static inline u32 smsc911x_reg_read(struct smsc911x_data *pdata, u32 reg)
 	}
 
 	BUG();
+	return 0;
 }
 
 static inline void smsc911x_reg_write(struct smsc911x_data *pdata, u32 reg,
-- 
GitLab


From 08168f7164fed494852361ab900358cd7a6b95d6 Mon Sep 17 00:00:00 2001
From: Steve Glendinning <steve.glendinning@smsc.com>
Date: Sun, 11 Jan 2009 00:14:52 -0800
Subject: [PATCH 106/492] smsc911x: register irq with device name, not driver
 name

This change lets "cat /proc/interrupts" show the name of the ethernet
device (e.g. eth0) rather than the driver name (smsc911x).

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/smsc911x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index fd3d2a7a1a2..f513bdf1c88 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1969,7 +1969,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 	smsc911x_reg_write(pdata, INT_STS, 0xFFFFFFFF);
 
 	retval = request_irq(dev->irq, smsc911x_irqhandler, IRQF_DISABLED,
-			     SMSC_CHIPNAME, dev);
+			     dev->name, dev);
 	if (retval) {
 		SMSC_WARNING(PROBE,
 			"Unable to claim requested irq: %d", dev->irq);
-- 
GitLab


From 4dbc242ed3c94ff1cc10640d2119279ba0be943e Mon Sep 17 00:00:00 2001
From: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Date: Sun, 11 Jan 2009 00:17:22 -0800
Subject: [PATCH 107/492] dccp ccid-3: Fix RFC reference

Thanks to Wei and Arnaldo for pointing out the correct
new reference for CCID-3.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/dccp/ccids/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/dccp/ccids/Kconfig b/net/dccp/ccids/Kconfig
index b28bf962edc..4b5db44970a 100644
--- a/net/dccp/ccids/Kconfig
+++ b/net/dccp/ccids/Kconfig
@@ -29,7 +29,7 @@ config IP_DCCP_CCID3
 	  http://www.ietf.org/rfc/rfc4342.txt
 
 	  The TFRC congestion control algorithms were initially described in
-	  RFC 5448.
+	  RFC 5348.
 
 	  This text was extracted from RFC 4340 (sec. 10.2),
 	  http://www.ietf.org/rfc/rfc4340.txt
-- 
GitLab


From 2a7e637de51ded7b0b56b927f45915eadb6734bb Mon Sep 17 00:00:00 2001
From: Ben Hutchings <bhutchings@solarflare.com>
Date: Sun, 11 Jan 2009 00:18:13 -0800
Subject: [PATCH 108/492] sfc: SFT9001: Fix condition for LNPGA power-off

Only the SFX7101 requires software power control.  This was
incorrectly being applied to the SFT9001 rev A as well.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sfc/tenxpress.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index b9768760fae..9ecb77da954 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -636,10 +636,11 @@ static void tenxpress_phy_fini(struct efx_nic *efx)
 {
 	int reg;
 
-	if (efx->phy_type == PHY_TYPE_SFT9001B) {
+	if (efx->phy_type == PHY_TYPE_SFT9001B)
 		device_remove_file(&efx->pci_dev->dev,
 				   &dev_attr_phy_short_reach);
-	} else {
+
+	if (efx->phy_type == PHY_TYPE_SFX7101) {
 		/* Power down the LNPGA */
 		reg = (1 << PMA_PMD_LNPGA_POWERDOWN_LBN);
 		mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
-- 
GitLab


From 47fd23fe8efeea3af4593a8424419df48724eb25 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Sun, 11 Jan 2009 00:19:36 -0800
Subject: [PATCH 109/492] cxgb3: Keep LRO off if disabled when interface is
 down

I have a system with a Chelsio adapter (driven by cxgb3) whose ports are
part of a Linux bridge.  Recently I updated the kernel and discovered
that things stopped working because cxgb3 was doing LRO on packets that
were passed into the bridge code for forwarding.  (Incidentally, this
problem manifested itself in a strange way that made debugging a bit
interesting -- for some reason, the skb_warn_if_lro() check in bridge
didn't trigger and these LROed packets were forwarded out a forcedeth
interface, and caused the forcedeth transmit path to get stuck)

This is because cxgb3 has no way of keeping state for the LRO flag until
the interface is brought up, so if the bridging code disables LRO while
the interface is down, then cxgb3_up() will just reenable LRO, and on my
Debian system at least, the init scripts add interfaces to a bridge
before bringing the interfaces up.

Fix this by keeping track of each interface's LRO state in cxgb3 so that
when bridge disables LRO, it stays disabled in cxgb3_up() when the
interface is brought up.  I did this by changing the rx_csum_offload
flag into a pair of bit flags; the effect of this on the rx_eth() fast
path is miniscule enough that it should be fine (eg on x86, a cmpb
instruction becomes a testb instruction).

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/cxgb3/adapter.h    |  7 ++++++-
 drivers/net/cxgb3/cxgb3_main.c | 22 ++++++++++++++--------
 drivers/net/cxgb3/sge.c        |  2 +-
 3 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 5b346f9eaa8..a89d8cc5120 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -50,12 +50,17 @@ struct vlan_group;
 struct adapter;
 struct sge_qset;
 
+enum {			/* rx_offload flags */
+	T3_RX_CSUM	= 1 << 0,
+	T3_LRO		= 1 << 1,
+};
+
 struct port_info {
 	struct adapter *adapter;
 	struct vlan_group *vlan_grp;
 	struct sge_qset *qs;
 	u8 port_id;
-	u8 rx_csum_offload;
+	u8 rx_offload;
 	u8 nqsets;
 	u8 first_qset;
 	struct cphy phy;
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 2847f947499..0089746b8d0 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -546,7 +546,7 @@ static int setup_sge_qsets(struct adapter *adap)
 		pi->qs = &adap->sge.qs[pi->first_qset];
 		for (j = pi->first_qset; j < pi->first_qset + pi->nqsets;
 		     ++j, ++qset_idx) {
-			set_qset_lro(dev, qset_idx, pi->rx_csum_offload);
+			set_qset_lro(dev, qset_idx, pi->rx_offload & T3_LRO);
 			err = t3_sge_alloc_qset(adap, qset_idx, 1,
 				(adap->flags & USING_MSIX) ? qset_idx + 1 :
 							     irq_idx,
@@ -1657,17 +1657,19 @@ static u32 get_rx_csum(struct net_device *dev)
 {
 	struct port_info *p = netdev_priv(dev);
 
-	return p->rx_csum_offload;
+	return p->rx_offload & T3_RX_CSUM;
 }
 
 static int set_rx_csum(struct net_device *dev, u32 data)
 {
 	struct port_info *p = netdev_priv(dev);
 
-	p->rx_csum_offload = data;
-	if (!data) {
+	if (data) {
+		p->rx_offload |= T3_RX_CSUM;
+	} else {
 		int i;
 
+		p->rx_offload &= ~(T3_RX_CSUM | T3_LRO);
 		for (i = p->first_qset; i < p->first_qset + p->nqsets; i++)
 			set_qset_lro(dev, i, 0);
 	}
@@ -1830,15 +1832,18 @@ static int cxgb3_set_flags(struct net_device *dev, u32 data)
 	int i;
 
 	if (data & ETH_FLAG_LRO) {
-		if (!pi->rx_csum_offload)
+		if (!(pi->rx_offload & T3_RX_CSUM))
 			return -EINVAL;
 
+		pi->rx_offload |= T3_LRO;
 		for (i = pi->first_qset; i < pi->first_qset + pi->nqsets; i++)
 			set_qset_lro(dev, i, 1);
 
-	} else
+	} else {
+		pi->rx_offload &= ~T3_LRO;
 		for (i = pi->first_qset; i < pi->first_qset + pi->nqsets; i++)
 			set_qset_lro(dev, i, 0);
+	}
 
 	return 0;
 }
@@ -1926,7 +1931,7 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
 				pi = adap2pinfo(adapter, i);
 				if (t.qset_idx >= pi->first_qset &&
 				    t.qset_idx < pi->first_qset + pi->nqsets &&
-				    !pi->rx_csum_offload)
+				    !(pi->rx_offload & T3_RX_CSUM))
 					return -EINVAL;
 			}
 
@@ -2946,7 +2951,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 		adapter->port[i] = netdev;
 		pi = netdev_priv(netdev);
 		pi->adapter = adapter;
-		pi->rx_csum_offload = 1;
+		pi->rx_offload = T3_RX_CSUM | T3_LRO;
 		pi->port_id = i;
 		netif_carrier_off(netdev);
 		netif_tx_stop_all_queues(netdev);
@@ -2955,6 +2960,7 @@ static int __devinit init_one(struct pci_dev *pdev,
 		netdev->mem_end = mmio_start + mmio_len - 1;
 		netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
 		netdev->features |= NETIF_F_LLTX;
+		netdev->features |= NETIF_F_LRO;
 		if (pci_using_dac)
 			netdev->features |= NETIF_F_HIGHDMA;
 
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 6c641a88947..14f9fb3e879 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -1932,7 +1932,7 @@ static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
 	skb_pull(skb, sizeof(*p) + pad);
 	skb->protocol = eth_type_trans(skb, adap->port[p->iff]);
 	pi = netdev_priv(skb->dev);
-	if (pi->rx_csum_offload && p->csum_valid && p->csum == htons(0xffff) &&
+	if ((pi->rx_offload & T3_RX_CSUM) && p->csum_valid && p->csum == htons(0xffff) &&
 	    !p->fragment) {
 		qs->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
-- 
GitLab


From 649274d993212e7c23c0cb734572c2311c200872 Mon Sep 17 00:00:00 2001
From: Dan Williams <dan.j.williams@intel.com>
Date: Sun, 11 Jan 2009 00:20:39 -0800
Subject: [PATCH 110/492] net_dma: acquire/release dma channels on ifup/ifdown

The recent dmaengine rework removed the capability to remove dma device
driver modules while net_dma is active.  Rather than notify
dmaengine-clients that channels are trying to be removed, we now rely on
clients to notify dmaengine when they no longer have a need for
channels.  Teach net_dma to release channels by taking dmaengine
references at netdevice open and dropping references at netdevice close.

Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/dmaengine.h | 10 ++++++++++
 net/core/dev.c            | 13 ++++++++++---
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 64dea2ab326..c73f1e2b59b 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -270,8 +270,18 @@ struct dma_device {
 
 /* --- public DMA engine API --- */
 
+#ifdef CONFIG_DMA_ENGINE
 void dmaengine_get(void);
 void dmaengine_put(void);
+#else
+static inline void dmaengine_get(void)
+{
+}
+static inline void dmaengine_put(void)
+{
+}
+#endif
+
 dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan,
 	void *dest, void *src, size_t len);
 dma_cookie_t dma_async_memcpy_buf_to_pg(struct dma_chan *chan,
diff --git a/net/core/dev.c b/net/core/dev.c
index 5f736f1ceea..b715a55cccc 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1087,6 +1087,11 @@ int dev_open(struct net_device *dev)
 		 */
 		dev->flags |= IFF_UP;
 
+		/*
+		 *	Enable NET_DMA
+		 */
+		dmaengine_get();
+
 		/*
 		 *	Initialize multicasting status
 		 */
@@ -1164,6 +1169,11 @@ int dev_close(struct net_device *dev)
 	 */
 	call_netdevice_notifiers(NETDEV_DOWN, dev);
 
+	/*
+	 *	Shutdown NET_DMA
+	 */
+	dmaengine_put();
+
 	return 0;
 }
 
@@ -5151,9 +5161,6 @@ static int __init net_dev_init(void)
 	hotcpu_notifier(dev_cpu_callback, 0);
 	dst_init();
 	dev_mcast_init();
-	#ifdef CONFIG_NET_DMA
-	dmaengine_get();
-	#endif
 	rc = 0;
 out:
 	return rc;
-- 
GitLab


From 3bc53427e4f323d4f33f70477fc32c1c2ae7fb5d Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Sun, 11 Jan 2009 00:25:21 -0800
Subject: [PATCH 111/492] ucc_geth: use correct UCCE macros

The UCC Event Register (UCCE) already has unambigous macro definitions in qe.h,
so we should not be defining our own in the UCC Ethernet driver.

Removed unused local variable 'dev' from ucc_geth_poll(), which fixes
a warning caused by commit 908a7a16b852ffd618a9127be8d62432182d81b4
("net: Remove unused netdev arg from some NAPI interfaces.").

Replaced in_be/out_be pairs with setbits32 or clrbits32, where applicable.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ucc_geth.c | 128 ++++++++++++++---------------------------
 drivers/net/ucc_geth.h | 114 ++++++++----------------------------
 2 files changed, 68 insertions(+), 174 deletions(-)

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 7d5a1303e30..11441225bf4 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -442,40 +442,30 @@ static void magic_packet_detection_enable(struct ucc_geth_private *ugeth)
 {
 	struct ucc_fast_private *uccf;
 	struct ucc_geth __iomem *ug_regs;
-	u32 maccfg2, uccm;
 
 	uccf = ugeth->uccf;
 	ug_regs = ugeth->ug_regs;
 
 	/* Enable interrupts for magic packet detection */
-	uccm = in_be32(uccf->p_uccm);
-	uccm |= UCCE_MPD;
-	out_be32(uccf->p_uccm, uccm);
+	setbits32(uccf->p_uccm, UCC_GETH_UCCE_MPD);
 
 	/* Enable magic packet detection */
-	maccfg2 = in_be32(&ug_regs->maccfg2);
-	maccfg2 |= MACCFG2_MPE;
-	out_be32(&ug_regs->maccfg2, maccfg2);
+	setbits32(&ug_regs->maccfg2, MACCFG2_MPE);
 }
 
 static void magic_packet_detection_disable(struct ucc_geth_private *ugeth)
 {
 	struct ucc_fast_private *uccf;
 	struct ucc_geth __iomem *ug_regs;
-	u32 maccfg2, uccm;
 
 	uccf = ugeth->uccf;
 	ug_regs = ugeth->ug_regs;
 
 	/* Disable interrupts for magic packet detection */
-	uccm = in_be32(uccf->p_uccm);
-	uccm &= ~UCCE_MPD;
-	out_be32(uccf->p_uccm, uccm);
+	clrbits32(uccf->p_uccm, UCC_GETH_UCCE_MPD);
 
 	/* Disable magic packet detection */
-	maccfg2 = in_be32(&ug_regs->maccfg2);
-	maccfg2 &= ~MACCFG2_MPE;
-	out_be32(&ug_regs->maccfg2, maccfg2);
+	clrbits32(&ug_regs->maccfg2, MACCFG2_MPE);
 }
 #endif /* MAGIC_PACKET */
 
@@ -585,7 +575,8 @@ static void get_statistics(struct ucc_geth_private *ugeth,
 
 	/* Hardware only if user handed pointer and driver actually
 	gathers hardware statistics */
-	if (hardware_statistics && (in_be32(&uf_regs->upsmr) & UPSMR_HSE)) {
+	if (hardware_statistics &&
+	    (in_be32(&uf_regs->upsmr) & UCC_GETH_UPSMR_HSE)) {
 		hardware_statistics->tx64 = in_be32(&ug_regs->tx64);
 		hardware_statistics->tx127 = in_be32(&ug_regs->tx127);
 		hardware_statistics->tx255 = in_be32(&ug_regs->tx255);
@@ -1181,9 +1172,7 @@ int init_flow_control_params(u32 automatic_flow_control_mode,
 	out_be32(uempr_register, value);
 
 	/* Set UPSMR register */
-	value = in_be32(upsmr_register);
-	value |= automatic_flow_control_mode;
-	out_be32(upsmr_register, value);
+	setbits32(upsmr_register, automatic_flow_control_mode);
 
 	value = in_be32(maccfg1_register);
 	if (rx_flow_control_enable)
@@ -1200,14 +1189,11 @@ static int init_hw_statistics_gathering_mode(int enable_hardware_statistics,
 					     u32 __iomem *upsmr_register,
 					     u16 __iomem *uescr_register)
 {
-	u32 upsmr_value = 0;
 	u16 uescr_value = 0;
+
 	/* Enable hardware statistics gathering if requested */
-	if (enable_hardware_statistics) {
-		upsmr_value = in_be32(upsmr_register);
-		upsmr_value |= UPSMR_HSE;
-		out_be32(upsmr_register, upsmr_value);
-	}
+	if (enable_hardware_statistics)
+		setbits32(upsmr_register, UCC_GETH_UPSMR_HSE);
 
 	/* Clear hardware statistics counters */
 	uescr_value = in_be16(uescr_register);
@@ -1233,23 +1219,17 @@ static int init_firmware_statistics_gathering_mode(int
 {
 	/* Note: this function does not check if */
 	/* the parameters it receives are NULL   */
-	u16 temoder_value;
-	u32 remoder_value;
 
 	if (enable_tx_firmware_statistics) {
 		out_be32(tx_rmon_base_ptr,
 			 tx_firmware_statistics_structure_address);
-		temoder_value = in_be16(temoder_register);
-		temoder_value |= TEMODER_TX_RMON_STATISTICS_ENABLE;
-		out_be16(temoder_register, temoder_value);
+		setbits16(temoder_register, TEMODER_TX_RMON_STATISTICS_ENABLE);
 	}
 
 	if (enable_rx_firmware_statistics) {
 		out_be32(rx_rmon_base_ptr,
 			 rx_firmware_statistics_structure_address);
-		remoder_value = in_be32(remoder_register);
-		remoder_value |= REMODER_RX_RMON_STATISTICS_ENABLE;
-		out_be32(remoder_register, remoder_value);
+		setbits32(remoder_register, REMODER_RX_RMON_STATISTICS_ENABLE);
 	}
 
 	return 0;
@@ -1316,15 +1296,12 @@ static int init_check_frame_length_mode(int length_check,
 static int init_preamble_length(u8 preamble_length,
 				u32 __iomem *maccfg2_register)
 {
-	u32 value = 0;
-
 	if ((preamble_length < 3) || (preamble_length > 7))
 		return -EINVAL;
 
-	value = in_be32(maccfg2_register);
-	value &= ~MACCFG2_PREL_MASK;
-	value |= (preamble_length << MACCFG2_PREL_SHIFT);
-	out_be32(maccfg2_register, value);
+	clrsetbits_be32(maccfg2_register, MACCFG2_PREL_MASK,
+			preamble_length << MACCFG2_PREL_SHIFT);
+
 	return 0;
 }
 
@@ -1337,19 +1314,19 @@ static int init_rx_parameters(int reject_broadcast,
 	value = in_be32(upsmr_register);
 
 	if (reject_broadcast)
-		value |= UPSMR_BRO;
+		value |= UCC_GETH_UPSMR_BRO;
 	else
-		value &= ~UPSMR_BRO;
+		value &= ~UCC_GETH_UPSMR_BRO;
 
 	if (receive_short_frames)
-		value |= UPSMR_RSH;
+		value |= UCC_GETH_UPSMR_RSH;
 	else
-		value &= ~UPSMR_RSH;
+		value &= ~UCC_GETH_UPSMR_RSH;
 
 	if (promiscuous)
-		value |= UPSMR_PRO;
+		value |= UCC_GETH_UPSMR_PRO;
 	else
-		value &= ~UPSMR_PRO;
+		value &= ~UCC_GETH_UPSMR_PRO;
 
 	out_be32(upsmr_register, value);
 
@@ -1410,26 +1387,27 @@ static int adjust_enet_interface(struct ucc_geth_private *ugeth)
 
 	/*                    Set UPSMR                      */
 	upsmr = in_be32(&uf_regs->upsmr);
-	upsmr &= ~(UPSMR_RPM | UPSMR_R10M | UPSMR_TBIM | UPSMR_RMM);
+	upsmr &= ~(UCC_GETH_UPSMR_RPM | UCC_GETH_UPSMR_R10M |
+		   UCC_GETH_UPSMR_TBIM | UCC_GETH_UPSMR_RMM);
 	if ((ugeth->phy_interface == PHY_INTERFACE_MODE_RMII) ||
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII) ||
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_ID) ||
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) ||
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
-		upsmr |= UPSMR_RPM;
+		upsmr |= UCC_GETH_UPSMR_RPM;
 		switch (ugeth->max_speed) {
 		case SPEED_10:
-			upsmr |= UPSMR_R10M;
+			upsmr |= UCC_GETH_UPSMR_R10M;
 			/* FALLTHROUGH */
 		case SPEED_100:
 			if (ugeth->phy_interface != PHY_INTERFACE_MODE_RTBI)
-				upsmr |= UPSMR_RMM;
+				upsmr |= UCC_GETH_UPSMR_RMM;
 		}
 	}
 	if ((ugeth->phy_interface == PHY_INTERFACE_MODE_TBI) ||
 	    (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
-		upsmr |= UPSMR_TBIM;
+		upsmr |= UCC_GETH_UPSMR_TBIM;
 	}
 	out_be32(&uf_regs->upsmr, upsmr);
 
@@ -1517,9 +1495,9 @@ static void adjust_link(struct net_device *dev)
 				    (ugeth->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) ||
 				    (ugeth->phy_interface == PHY_INTERFACE_MODE_RTBI)) {
 					if (phydev->speed == SPEED_10)
-						upsmr |= UPSMR_R10M;
+						upsmr |= UCC_GETH_UPSMR_R10M;
 					else
-						upsmr &= ~(UPSMR_R10M);
+						upsmr &= ~UCC_GETH_UPSMR_R10M;
 				}
 				break;
 			default:
@@ -1602,10 +1580,8 @@ static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
 	uccf = ugeth->uccf;
 
 	/* Mask GRACEFUL STOP TX interrupt bit and clear it */
-	temp = in_be32(uccf->p_uccm);
-	temp &= ~UCCE_GRA;
-	out_be32(uccf->p_uccm, temp);
-	out_be32(uccf->p_ucce, UCCE_GRA);	/* clear by writing 1 */
+	clrbits32(uccf->p_uccm, UCC_GETH_UCCE_GRA);
+	out_be32(uccf->p_ucce, UCC_GETH_UCCE_GRA);  /* clear by writing 1 */
 
 	/* Issue host command */
 	cecr_subblock =
@@ -1617,7 +1593,7 @@ static int ugeth_graceful_stop_tx(struct ucc_geth_private *ugeth)
 	do {
 		msleep(10);
 		temp = in_be32(uccf->p_ucce);
-	} while (!(temp & UCCE_GRA) && --i);
+	} while (!(temp & UCC_GETH_UCCE_GRA) && --i);
 
 	uccf->stopped_tx = 1;
 
@@ -1975,12 +1951,9 @@ static void ucc_geth_set_multi(struct net_device *dev)
 	uf_regs = ugeth->uccf->uf_regs;
 
 	if (dev->flags & IFF_PROMISC) {
-
-		out_be32(&uf_regs->upsmr, in_be32(&uf_regs->upsmr) | UPSMR_PRO);
-
+		setbits32(&uf_regs->upsmr, UCC_GETH_UPSMR_PRO);
 	} else {
-
-		out_be32(&uf_regs->upsmr, in_be32(&uf_regs->upsmr)&~UPSMR_PRO);
+		clrbits32(&uf_regs->upsmr, UCC_GETH_UPSMR_PRO);
 
 		p_82xx_addr_filt =
 		    (struct ucc_geth_82xx_address_filtering_pram __iomem *) ugeth->
@@ -2020,7 +1993,6 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
 {
 	struct ucc_geth __iomem *ug_regs = ugeth->ug_regs;
 	struct phy_device *phydev = ugeth->phydev;
-	u32 tempval;
 
 	ugeth_vdbg("%s: IN", __func__);
 
@@ -2037,9 +2009,7 @@ static void ucc_geth_stop(struct ucc_geth_private *ugeth)
 	out_be32(ugeth->uccf->p_ucce, 0xffffffff);
 
 	/* Disable Rx and Tx */
-	tempval = in_be32(&ug_regs->maccfg1);
-	tempval &= ~(MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX);
-	out_be32(&ug_regs->maccfg1, tempval);
+	clrbits32(&ug_regs->maccfg1, MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX);
 
 	ucc_geth_memclean(ugeth);
 }
@@ -2153,10 +2123,10 @@ static int ucc_struct_init(struct ucc_geth_private *ugeth)
 	/* Generate uccm_mask for receive */
 	uf_info->uccm_mask = ug_info->eventRegMask & UCCE_OTHER;/* Errors */
 	for (i = 0; i < ug_info->numQueuesRx; i++)
-		uf_info->uccm_mask |= (UCCE_RXBF_SINGLE_MASK << i);
+		uf_info->uccm_mask |= (UCC_GETH_UCCE_RXF0 << i);
 
 	for (i = 0; i < ug_info->numQueuesTx; i++)
-		uf_info->uccm_mask |= (UCCE_TXBF_SINGLE_MASK << i);
+		uf_info->uccm_mask |= (UCC_GETH_UCCE_TXB0 << i);
 	/* Initialize the general fast UCC block. */
 	if (ucc_fast_init(uf_info, &ugeth->uccf)) {
 		if (netif_msg_probe(ugeth))
@@ -2185,7 +2155,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
 	struct ucc_geth __iomem *ug_regs;
 	int ret_val = -EINVAL;
 	u32 remoder = UCC_GETH_REMODER_INIT;
-	u32 init_enet_pram_offset, cecr_subblock, command, maccfg1;
+	u32 init_enet_pram_offset, cecr_subblock, command;
 	u32 ifstat, i, j, size, l2qt, l3qt, length;
 	u16 temoder = UCC_GETH_TEMODER_INIT;
 	u16 test;
@@ -2281,10 +2251,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
 				 &uf_regs->upsmr,
 				 &ug_regs->uempr, &ug_regs->maccfg1);
 
-	maccfg1 = in_be32(&ug_regs->maccfg1);
-	maccfg1 |= MACCFG1_ENABLE_RX;
-	maccfg1 |= MACCFG1_ENABLE_TX;
-	out_be32(&ug_regs->maccfg1, maccfg1);
+	setbits32(&ug_regs->maccfg1, MACCFG1_ENABLE_RX | MACCFG1_ENABLE_TX);
 
 	/*                    Set IPGIFG                     */
 	/* For more details see the hardware spec.           */
@@ -3274,7 +3241,6 @@ static int ucc_geth_tx(struct net_device *dev, u8 txQ)
 static int ucc_geth_poll(struct napi_struct *napi, int budget)
 {
 	struct ucc_geth_private *ugeth = container_of(napi, struct ucc_geth_private, napi);
-	struct net_device *dev = ugeth->dev;
 	struct ucc_geth_info *ug_info;
 	int howmany, i;
 
@@ -3285,14 +3251,8 @@ static int ucc_geth_poll(struct napi_struct *napi, int budget)
 		howmany += ucc_geth_rx(ugeth, i, budget - howmany);
 
 	if (howmany < budget) {
-		struct ucc_fast_private *uccf;
-		u32 uccm;
-
 		netif_rx_complete(napi);
-		uccf = ugeth->uccf;
-		uccm = in_be32(uccf->p_uccm);
-		uccm |= UCCE_RX_EVENTS;
-		out_be32(uccf->p_uccm, uccm);
+		setbits32(ugeth->uccf->p_uccm, UCCE_RX_EVENTS);
 	}
 
 	return howmany;
@@ -3332,7 +3292,7 @@ static irqreturn_t ucc_geth_irq_handler(int irq, void *info)
 	/* Tx event processing */
 	if (ucce & UCCE_TX_EVENTS) {
 		spin_lock(&ugeth->lock);
-		tx_mask = UCCE_TXBF_SINGLE_MASK;
+		tx_mask = UCC_GETH_UCCE_TXB0;
 		for (i = 0; i < ug_info->numQueuesTx; i++) {
 			if (ucce & tx_mask)
 				ucc_geth_tx(dev, i);
@@ -3344,12 +3304,10 @@ static irqreturn_t ucc_geth_irq_handler(int irq, void *info)
 
 	/* Errors and other events */
 	if (ucce & UCCE_OTHER) {
-		if (ucce & UCCE_BSY) {
+		if (ucce & UCC_GETH_UCCE_BSY)
 			dev->stats.rx_errors++;
-		}
-		if (ucce & UCCE_TXE) {
+		if (ucce & UCC_GETH_UCCE_TXE)
 			dev->stats.tx_errors++;
-		}
 	}
 
 	return IRQ_HANDLED;
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index d74d2f7cb73..8f699cb773e 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -162,92 +162,27 @@ struct ucc_geth {
 								   boundary */
 
 /* UCC GETH Event Register */
-#define UCCE_MPD                                0x80000000	/* Magic packet
-								   detection */
-#define UCCE_SCAR                               0x40000000
-#define UCCE_GRA                                0x20000000	/* Tx graceful
-								   stop
-								   complete */
-#define UCCE_CBPR                               0x10000000
-#define UCCE_BSY                                0x08000000
-#define UCCE_RXC                                0x04000000
-#define UCCE_TXC                                0x02000000
-#define UCCE_TXE                                0x01000000
-#define UCCE_TXB7                               0x00800000
-#define UCCE_TXB6                               0x00400000
-#define UCCE_TXB5                               0x00200000
-#define UCCE_TXB4                               0x00100000
-#define UCCE_TXB3                               0x00080000
-#define UCCE_TXB2                               0x00040000
-#define UCCE_TXB1                               0x00020000
-#define UCCE_TXB0                               0x00010000
-#define UCCE_RXB7                               0x00008000
-#define UCCE_RXB6                               0x00004000
-#define UCCE_RXB5                               0x00002000
-#define UCCE_RXB4                               0x00001000
-#define UCCE_RXB3                               0x00000800
-#define UCCE_RXB2                               0x00000400
-#define UCCE_RXB1                               0x00000200
-#define UCCE_RXB0                               0x00000100
-#define UCCE_RXF7                               0x00000080
-#define UCCE_RXF6                               0x00000040
-#define UCCE_RXF5                               0x00000020
-#define UCCE_RXF4                               0x00000010
-#define UCCE_RXF3                               0x00000008
-#define UCCE_RXF2                               0x00000004
-#define UCCE_RXF1                               0x00000002
-#define UCCE_RXF0                               0x00000001
-
-#define UCCE_RXBF_SINGLE_MASK                   (UCCE_RXF0)
-#define UCCE_TXBF_SINGLE_MASK                   (UCCE_TXB0)
-
-#define UCCE_TXB         (UCCE_TXB7 | UCCE_TXB6 | UCCE_TXB5 | UCCE_TXB4 |\
-			UCCE_TXB3 | UCCE_TXB2 | UCCE_TXB1 | UCCE_TXB0)
-#define UCCE_RXB         (UCCE_RXB7 | UCCE_RXB6 | UCCE_RXB5 | UCCE_RXB4 |\
-			UCCE_RXB3 | UCCE_RXB2 | UCCE_RXB1 | UCCE_RXB0)
-#define UCCE_RXF         (UCCE_RXF7 | UCCE_RXF6 | UCCE_RXF5 | UCCE_RXF4 |\
-			UCCE_RXF3 | UCCE_RXF2 | UCCE_RXF1 | UCCE_RXF0)
-#define UCCE_OTHER       (UCCE_SCAR | UCCE_GRA  | UCCE_CBPR | UCCE_BSY  |\
-			UCCE_RXC  | UCCE_TXC  | UCCE_TXE)
-
-#define UCCE_RX_EVENTS							(UCCE_RXF | UCCE_BSY)
-#define UCCE_TX_EVENTS							(UCCE_TXB | UCCE_TXE)
-
-/* UCC GETH UPSMR (Protocol Specific Mode Register) */
-#define UPSMR_ECM                               0x04000000	/* Enable CAM
-								   Miss or
-								   Enable
-								   Filtering
-								   Miss */
-#define UPSMR_HSE                               0x02000000	/* Hardware
-								   Statistics
-								   Enable */
-#define UPSMR_PRO                               0x00400000	/* Promiscuous*/
-#define UPSMR_CAP                               0x00200000	/* CAM polarity
-								 */
-#define UPSMR_RSH                               0x00100000	/* Receive
-								   Short Frames
-								 */
-#define UPSMR_RPM                               0x00080000	/* Reduced Pin
-								   Mode
-								   interfaces */
-#define UPSMR_R10M                              0x00040000	/* RGMII/RMII
-								   10 Mode */
-#define UPSMR_RLPB                              0x00020000	/* RMII
-								   Loopback
-								   Mode */
-#define UPSMR_TBIM                              0x00010000	/* Ten-bit
-								   Interface
-								   Mode */
-#define UPSMR_RMM                               0x00001000	/* RMII/RGMII
-								   Mode */
-#define UPSMR_CAM                               0x00000400	/* CAM Address
-								   Matching */
-#define UPSMR_BRO                               0x00000200	/* Broadcast
-								   Address */
-#define UPSMR_RES1                              0x00002000	/* Reserved
-								   feild - must
-								   be 1 */
+#define UCCE_TXB   (UCC_GETH_UCCE_TXB7 | UCC_GETH_UCCE_TXB6 | \
+		    UCC_GETH_UCCE_TXB5 | UCC_GETH_UCCE_TXB4 | \
+		    UCC_GETH_UCCE_TXB3 | UCC_GETH_UCCE_TXB2 | \
+		    UCC_GETH_UCCE_TXB1 | UCC_GETH_UCCE_TXB0)
+
+#define UCCE_RXB   (UCC_GETH_UCCE_RXB7 | UCC_GETH_UCCE_RXB6 | \
+		    UCC_GETH_UCCE_RXB5 | UCC_GETH_UCCE_RXB4 | \
+		    UCC_GETH_UCCE_RXB3 | UCC_GETH_UCCE_RXB2 | \
+		    UCC_GETH_UCCE_RXB1 | UCC_GETH_UCCE_RXB0)
+
+#define UCCE_RXF   (UCC_GETH_UCCE_RXF7 | UCC_GETH_UCCE_RXF6 | \
+		    UCC_GETH_UCCE_RXF5 | UCC_GETH_UCCE_RXF4 | \
+		    UCC_GETH_UCCE_RXF3 | UCC_GETH_UCCE_RXF2 | \
+		    UCC_GETH_UCCE_RXF1 | UCC_GETH_UCCE_RXF0)
+
+#define UCCE_OTHER (UCC_GETH_UCCE_SCAR | UCC_GETH_UCCE_GRA | \
+		    UCC_GETH_UCCE_CBPR | UCC_GETH_UCCE_BSY | \
+		    UCC_GETH_UCCE_RXC  | UCC_GETH_UCCE_TXC | UCC_GETH_UCCE_TXE)
+
+#define UCCE_RX_EVENTS  (UCCE_RXF | UCC_GETH_UCCE_BSY)
+#define UCCE_TX_EVENTS	(UCCE_TXB | UCC_GETH_UCCE_TXE)
 
 /* UCC GETH MACCFG1 (MAC Configuration 1 Register) */
 #define MACCFG1_FLOW_RX                         0x00000020	/* Flow Control
@@ -945,9 +880,10 @@ struct ucc_geth_hardware_statistics {
 #define UCC_GETH_REMODER_INIT                   0	/* bits that must be
 							   set */
 #define UCC_GETH_TEMODER_INIT                   0xC000	/* bits that must */
-#define UCC_GETH_UPSMR_INIT                     (UPSMR_RES1)	/* Start value
-								   for this
-								   register */
+
+/* Initial value for UPSMR */
+#define UCC_GETH_UPSMR_INIT                     UCC_GETH_UPSMR_RES1
+
 #define UCC_GETH_MACCFG1_INIT                   0
 #define UCC_GETH_MACCFG2_INIT                   (MACCFG2_RESERVED_1)
 
-- 
GitLab


From 797c3f322454f5994e88b0e0bfc34cd4ad521d38 Mon Sep 17 00:00:00 2001
From: Anirban Sinha <ASinha@zeugmasystems.com>
Date: Thu, 13 Nov 2008 11:50:12 -0800
Subject: [PATCH 112/492] MIPS: 64-bit: Use generic 32-bit ptrace compat code.

Signed-off-by: Anirban Sinha <asinha@zeugmasystems.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/ptrace32.c | 64 +------------------------------------
 1 file changed, 1 insertion(+), 63 deletions(-)

diff --git a/arch/mips/kernel/ptrace32.c b/arch/mips/kernel/ptrace32.c
index 1ca34104e59..c4f9ac17474 100644
--- a/arch/mips/kernel/ptrace32.c
+++ b/arch/mips/kernel/ptrace32.c
@@ -49,19 +49,6 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 	int ret;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA: {
-		unsigned int tmp;
-		int copied;
-
-		copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
-		ret = -EIO;
-		if (copied != sizeof(tmp))
-			break;
-		ret = put_user(tmp, (unsigned int __user *) (unsigned long) data);
-		break;
-	}
 
 	/*
 	 * Read 4 bytes of the other process' storage
@@ -208,16 +195,6 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		break;
 	}
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = 0;
-		if (access_process_vm(child, addr, &data, sizeof(data), 1)
-		    == sizeof(data))
-			break;
-		ret = -EIO;
-		break;
-
 	/*
 	 * Write 4 bytes into the other process' storage
 	 *  data is the 4 bytes that the user wants written
@@ -332,50 +309,11 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		ret = ptrace_setfpregs(child, (__u32 __user *) (__u64) data);
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL) {
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		}
-		else {
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		}
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
 	case PTRACE_GET_THREAD_AREA:
 		ret = put_user(task_thread_info(child)->tp_value,
 				(unsigned int __user *) (unsigned long) data);
 		break;
 
-	case PTRACE_DETACH: /* detach a process that was attached. */
-		ret = ptrace_detach(child, data);
-		break;
-
-	case PTRACE_GETEVENTMSG:
-		ret = put_user(child->ptrace_message,
-			       (unsigned int __user *) (unsigned long) data);
-		break;
-
 	case PTRACE_GET_THREAD_AREA_3264:
 		ret = put_user(task_thread_info(child)->tp_value,
 				(unsigned long __user *) (unsigned long) data);
@@ -392,7 +330,7 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		break;
 
 	default:
-		ret = ptrace_request(child, request, addr, data);
+		ret = compat_ptrace_request(child, request, addr, data);
 		break;
 	}
 out:
-- 
GitLab


From 2bd2dd059ca7406a030bace8dccdb25f635578c1 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Tue, 25 Nov 2008 14:12:32 +0100
Subject: [PATCH 113/492] MIPS: Alchemy: Change strict_strtol to strict_strtoul

Since memsize is unsigned, it would seem better to use strict_strtoul that
strict_strtol.

A simplified version of the semantic patch that makes this change is as
follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@s2@
long e;
position p;
@@

strict_strtol@p(...,&e)

@@
position p != s2.p;
type T;
T e;
@@

- strict_strtol@p
+ strict_strtoul
  (...,&e)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/db1x00/init.c  | 2 +-
 arch/mips/alchemy/mtx-1/init.c   | 2 +-
 arch/mips/alchemy/pb1000/init.c  | 2 +-
 arch/mips/alchemy/pb1100/init.c  | 2 +-
 arch/mips/alchemy/pb1200/init.c  | 2 +-
 arch/mips/alchemy/pb1500/init.c  | 2 +-
 arch/mips/alchemy/pb1550/init.c  | 2 +-
 arch/mips/alchemy/xxs1500/init.c | 2 +-
 8 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/mips/alchemy/db1x00/init.c b/arch/mips/alchemy/db1x00/init.c
index 84741351496..d91d334797c 100644
--- a/arch/mips/alchemy/db1x00/init.c
+++ b/arch/mips/alchemy/db1x00/init.c
@@ -57,6 +57,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		strict_strtol(memsize_str, 0, &memsize);
+		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c
index 3bae13c2895..5e871c8d9e9 100644
--- a/arch/mips/alchemy/mtx-1/init.c
+++ b/arch/mips/alchemy/mtx-1/init.c
@@ -55,6 +55,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		strict_strtol(memsize_str, 0, &memsize);
+		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/alchemy/pb1000/init.c b/arch/mips/alchemy/pb1000/init.c
index 8a9c7d57208..640055b8ac6 100644
--- a/arch/mips/alchemy/pb1000/init.c
+++ b/arch/mips/alchemy/pb1000/init.c
@@ -52,6 +52,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		strict_strtol(memsize_str, 0, &memsize);
+		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/alchemy/pb1100/init.c b/arch/mips/alchemy/pb1100/init.c
index 7c6792308bc..d34fbd8cc93 100644
--- a/arch/mips/alchemy/pb1100/init.c
+++ b/arch/mips/alchemy/pb1100/init.c
@@ -54,7 +54,7 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		strict_strtol(memsize_str, 0, &memsize);
+		strict_strtoul(memsize_str, 0, &memsize);
 
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/alchemy/pb1200/init.c b/arch/mips/alchemy/pb1200/init.c
index e9b2a0fd48a..edd9425fa32 100644
--- a/arch/mips/alchemy/pb1200/init.c
+++ b/arch/mips/alchemy/pb1200/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		strict_strtol(memsize_str, 0, &memsize);
+		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/alchemy/pb1500/init.c b/arch/mips/alchemy/pb1500/init.c
index 3b6e395cf95..b73343b9dba 100644
--- a/arch/mips/alchemy/pb1500/init.c
+++ b/arch/mips/alchemy/pb1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		strict_strtol(memsize_str, 0, &memsize);
+		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/alchemy/pb1550/init.c b/arch/mips/alchemy/pb1550/init.c
index e1055a13a1a..11e7f4acd48 100644
--- a/arch/mips/alchemy/pb1550/init.c
+++ b/arch/mips/alchemy/pb1550/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		strict_strtol(memsize_str, 0, &memsize);
+		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c
index 7516434760a..456fa142c09 100644
--- a/arch/mips/alchemy/xxs1500/init.c
+++ b/arch/mips/alchemy/xxs1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		strict_strtol(memsize_str, 0, &memsize);
+		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
-- 
GitLab


From 54293ec3074a5fe61abd297502f68b2529a3dab3 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:19 -0800
Subject: [PATCH 114/492] MIPS: Add Cavium OCTEON processor CSR definitions

Here we define the addresses and bit-fields of the Configuration and
Status Registers (CSRs) for some of the hardware functional units on
the OCTEON SOC.

Definitions are needed for:

CIU  -- Central Interrupt Unit.
GPIO -- General Purpose Input Output.
IOB  -- Input / Output {Busing,Bridge}.
IPD  -- Input Packet Data unit.
L2C  -- Level-2 Cache controller.
L2D  -- Level-2 Data cache.
L2T  -- Level-2 cache Tag.
LED  -- Light Emitting Diode controller.
MIO  -- Miscellaneous Input / Output.
POW  -- Packet Order / Work unit.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/octeon/cvmx-ciu-defs.h  | 1616 +++++++++++++
 arch/mips/include/asm/octeon/cvmx-gpio-defs.h |  219 ++
 arch/mips/include/asm/octeon/cvmx-iob-defs.h  |  530 +++++
 arch/mips/include/asm/octeon/cvmx-ipd-defs.h  |  877 ++++++++
 arch/mips/include/asm/octeon/cvmx-l2c-defs.h  |  963 ++++++++
 arch/mips/include/asm/octeon/cvmx-l2d-defs.h  |  369 +++
 arch/mips/include/asm/octeon/cvmx-l2t-defs.h  |  141 ++
 arch/mips/include/asm/octeon/cvmx-led-defs.h  |  240 ++
 arch/mips/include/asm/octeon/cvmx-mio-defs.h  | 2004 +++++++++++++++++
 arch/mips/include/asm/octeon/cvmx-pow-defs.h  |  698 ++++++
 10 files changed, 7657 insertions(+)
 create mode 100644 arch/mips/include/asm/octeon/cvmx-ciu-defs.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-gpio-defs.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-iob-defs.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-ipd-defs.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-l2c-defs.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-l2d-defs.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-l2t-defs.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-led-defs.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-mio-defs.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-pow-defs.h

diff --git a/arch/mips/include/asm/octeon/cvmx-ciu-defs.h b/arch/mips/include/asm/octeon/cvmx-ciu-defs.h
new file mode 100644
index 00000000000..f8f05b7764b
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-ciu-defs.h
@@ -0,0 +1,1616 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_CIU_DEFS_H__
+#define __CVMX_CIU_DEFS_H__
+
+#define CVMX_CIU_BIST \
+	 CVMX_ADD_IO_SEG(0x0001070000000730ull)
+#define CVMX_CIU_DINT \
+	 CVMX_ADD_IO_SEG(0x0001070000000720ull)
+#define CVMX_CIU_FUSE \
+	 CVMX_ADD_IO_SEG(0x0001070000000728ull)
+#define CVMX_CIU_GSTOP \
+	 CVMX_ADD_IO_SEG(0x0001070000000710ull)
+#define CVMX_CIU_INTX_EN0(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000200ull + (((offset) & 63) * 16))
+#define CVMX_CIU_INTX_EN0_W1C(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000002200ull + (((offset) & 63) * 16))
+#define CVMX_CIU_INTX_EN0_W1S(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000006200ull + (((offset) & 63) * 16))
+#define CVMX_CIU_INTX_EN1(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000208ull + (((offset) & 63) * 16))
+#define CVMX_CIU_INTX_EN1_W1C(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000002208ull + (((offset) & 63) * 16))
+#define CVMX_CIU_INTX_EN1_W1S(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000006208ull + (((offset) & 63) * 16))
+#define CVMX_CIU_INTX_EN4_0(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000C80ull + (((offset) & 15) * 16))
+#define CVMX_CIU_INTX_EN4_0_W1C(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000002C80ull + (((offset) & 15) * 16))
+#define CVMX_CIU_INTX_EN4_0_W1S(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000006C80ull + (((offset) & 15) * 16))
+#define CVMX_CIU_INTX_EN4_1(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000C88ull + (((offset) & 15) * 16))
+#define CVMX_CIU_INTX_EN4_1_W1C(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000002C88ull + (((offset) & 15) * 16))
+#define CVMX_CIU_INTX_EN4_1_W1S(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000006C88ull + (((offset) & 15) * 16))
+#define CVMX_CIU_INTX_SUM0(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000000ull + (((offset) & 63) * 8))
+#define CVMX_CIU_INTX_SUM4(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000C00ull + (((offset) & 15) * 8))
+#define CVMX_CIU_INT_SUM1 \
+	 CVMX_ADD_IO_SEG(0x0001070000000108ull)
+#define CVMX_CIU_MBOX_CLRX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000680ull + (((offset) & 15) * 8))
+#define CVMX_CIU_MBOX_SETX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000600ull + (((offset) & 15) * 8))
+#define CVMX_CIU_NMI \
+	 CVMX_ADD_IO_SEG(0x0001070000000718ull)
+#define CVMX_CIU_PCI_INTA \
+	 CVMX_ADD_IO_SEG(0x0001070000000750ull)
+#define CVMX_CIU_PP_DBG \
+	 CVMX_ADD_IO_SEG(0x0001070000000708ull)
+#define CVMX_CIU_PP_POKEX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000580ull + (((offset) & 15) * 8))
+#define CVMX_CIU_PP_RST \
+	 CVMX_ADD_IO_SEG(0x0001070000000700ull)
+#define CVMX_CIU_QLM_DCOK \
+	 CVMX_ADD_IO_SEG(0x0001070000000760ull)
+#define CVMX_CIU_QLM_JTGC \
+	 CVMX_ADD_IO_SEG(0x0001070000000768ull)
+#define CVMX_CIU_QLM_JTGD \
+	 CVMX_ADD_IO_SEG(0x0001070000000770ull)
+#define CVMX_CIU_SOFT_BIST \
+	 CVMX_ADD_IO_SEG(0x0001070000000738ull)
+#define CVMX_CIU_SOFT_PRST \
+	 CVMX_ADD_IO_SEG(0x0001070000000748ull)
+#define CVMX_CIU_SOFT_PRST1 \
+	 CVMX_ADD_IO_SEG(0x0001070000000758ull)
+#define CVMX_CIU_SOFT_RST \
+	 CVMX_ADD_IO_SEG(0x0001070000000740ull)
+#define CVMX_CIU_TIMX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000480ull + (((offset) & 3) * 8))
+#define CVMX_CIU_WDOGX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000500ull + (((offset) & 15) * 8))
+
+union cvmx_ciu_bist {
+	uint64_t u64;
+	struct cvmx_ciu_bist_s {
+		uint64_t reserved_4_63:60;
+		uint64_t bist:4;
+	} s;
+	struct cvmx_ciu_bist_s cn30xx;
+	struct cvmx_ciu_bist_s cn31xx;
+	struct cvmx_ciu_bist_s cn38xx;
+	struct cvmx_ciu_bist_s cn38xxp2;
+	struct cvmx_ciu_bist_cn50xx {
+		uint64_t reserved_2_63:62;
+		uint64_t bist:2;
+	} cn50xx;
+	struct cvmx_ciu_bist_cn52xx {
+		uint64_t reserved_3_63:61;
+		uint64_t bist:3;
+	} cn52xx;
+	struct cvmx_ciu_bist_cn52xx cn52xxp1;
+	struct cvmx_ciu_bist_s cn56xx;
+	struct cvmx_ciu_bist_s cn56xxp1;
+	struct cvmx_ciu_bist_s cn58xx;
+	struct cvmx_ciu_bist_s cn58xxp1;
+};
+
+union cvmx_ciu_dint {
+	uint64_t u64;
+	struct cvmx_ciu_dint_s {
+		uint64_t reserved_16_63:48;
+		uint64_t dint:16;
+	} s;
+	struct cvmx_ciu_dint_cn30xx {
+		uint64_t reserved_1_63:63;
+		uint64_t dint:1;
+	} cn30xx;
+	struct cvmx_ciu_dint_cn31xx {
+		uint64_t reserved_2_63:62;
+		uint64_t dint:2;
+	} cn31xx;
+	struct cvmx_ciu_dint_s cn38xx;
+	struct cvmx_ciu_dint_s cn38xxp2;
+	struct cvmx_ciu_dint_cn31xx cn50xx;
+	struct cvmx_ciu_dint_cn52xx {
+		uint64_t reserved_4_63:60;
+		uint64_t dint:4;
+	} cn52xx;
+	struct cvmx_ciu_dint_cn52xx cn52xxp1;
+	struct cvmx_ciu_dint_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t dint:12;
+	} cn56xx;
+	struct cvmx_ciu_dint_cn56xx cn56xxp1;
+	struct cvmx_ciu_dint_s cn58xx;
+	struct cvmx_ciu_dint_s cn58xxp1;
+};
+
+union cvmx_ciu_fuse {
+	uint64_t u64;
+	struct cvmx_ciu_fuse_s {
+		uint64_t reserved_16_63:48;
+		uint64_t fuse:16;
+	} s;
+	struct cvmx_ciu_fuse_cn30xx {
+		uint64_t reserved_1_63:63;
+		uint64_t fuse:1;
+	} cn30xx;
+	struct cvmx_ciu_fuse_cn31xx {
+		uint64_t reserved_2_63:62;
+		uint64_t fuse:2;
+	} cn31xx;
+	struct cvmx_ciu_fuse_s cn38xx;
+	struct cvmx_ciu_fuse_s cn38xxp2;
+	struct cvmx_ciu_fuse_cn31xx cn50xx;
+	struct cvmx_ciu_fuse_cn52xx {
+		uint64_t reserved_4_63:60;
+		uint64_t fuse:4;
+	} cn52xx;
+	struct cvmx_ciu_fuse_cn52xx cn52xxp1;
+	struct cvmx_ciu_fuse_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t fuse:12;
+	} cn56xx;
+	struct cvmx_ciu_fuse_cn56xx cn56xxp1;
+	struct cvmx_ciu_fuse_s cn58xx;
+	struct cvmx_ciu_fuse_s cn58xxp1;
+};
+
+union cvmx_ciu_gstop {
+	uint64_t u64;
+	struct cvmx_ciu_gstop_s {
+		uint64_t reserved_1_63:63;
+		uint64_t gstop:1;
+	} s;
+	struct cvmx_ciu_gstop_s cn30xx;
+	struct cvmx_ciu_gstop_s cn31xx;
+	struct cvmx_ciu_gstop_s cn38xx;
+	struct cvmx_ciu_gstop_s cn38xxp2;
+	struct cvmx_ciu_gstop_s cn50xx;
+	struct cvmx_ciu_gstop_s cn52xx;
+	struct cvmx_ciu_gstop_s cn52xxp1;
+	struct cvmx_ciu_gstop_s cn56xx;
+	struct cvmx_ciu_gstop_s cn56xxp1;
+	struct cvmx_ciu_gstop_s cn58xx;
+	struct cvmx_ciu_gstop_s cn58xxp1;
+};
+
+union cvmx_ciu_intx_en0 {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en0_s {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t mpi:1;
+		uint64_t pcm:1;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} s;
+	struct cvmx_ciu_intx_en0_cn30xx {
+		uint64_t reserved_59_63:5;
+		uint64_t mpi:1;
+		uint64_t pcm:1;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t reserved_47_47:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn30xx;
+	struct cvmx_ciu_intx_en0_cn31xx {
+		uint64_t reserved_59_63:5;
+		uint64_t mpi:1;
+		uint64_t pcm:1;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn31xx;
+	struct cvmx_ciu_intx_en0_cn38xx {
+		uint64_t reserved_56_63:8;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn38xx;
+	struct cvmx_ciu_intx_en0_cn38xx cn38xxp2;
+	struct cvmx_ciu_intx_en0_cn30xx cn50xx;
+	struct cvmx_ciu_intx_en0_cn52xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn52xx;
+	struct cvmx_ciu_intx_en0_cn52xx cn52xxp1;
+	struct cvmx_ciu_intx_en0_cn56xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn56xx;
+	struct cvmx_ciu_intx_en0_cn56xx cn56xxp1;
+	struct cvmx_ciu_intx_en0_cn38xx cn58xx;
+	struct cvmx_ciu_intx_en0_cn38xx cn58xxp1;
+};
+
+union cvmx_ciu_intx_en0_w1c {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en0_w1c_s {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} s;
+	struct cvmx_ciu_intx_en0_w1c_cn52xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn52xx;
+	struct cvmx_ciu_intx_en0_w1c_s cn56xx;
+	struct cvmx_ciu_intx_en0_w1c_cn58xx {
+		uint64_t reserved_56_63:8;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn58xx;
+};
+
+union cvmx_ciu_intx_en0_w1s {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en0_w1s_s {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} s;
+	struct cvmx_ciu_intx_en0_w1s_cn52xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn52xx;
+	struct cvmx_ciu_intx_en0_w1s_s cn56xx;
+	struct cvmx_ciu_intx_en0_w1s_cn58xx {
+		uint64_t reserved_56_63:8;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn58xx;
+};
+
+union cvmx_ciu_intx_en1 {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en1_s {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t wdog:16;
+	} s;
+	struct cvmx_ciu_intx_en1_cn30xx {
+		uint64_t reserved_1_63:63;
+		uint64_t wdog:1;
+	} cn30xx;
+	struct cvmx_ciu_intx_en1_cn31xx {
+		uint64_t reserved_2_63:62;
+		uint64_t wdog:2;
+	} cn31xx;
+	struct cvmx_ciu_intx_en1_cn38xx {
+		uint64_t reserved_16_63:48;
+		uint64_t wdog:16;
+	} cn38xx;
+	struct cvmx_ciu_intx_en1_cn38xx cn38xxp2;
+	struct cvmx_ciu_intx_en1_cn31xx cn50xx;
+	struct cvmx_ciu_intx_en1_cn52xx {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t reserved_4_15:12;
+		uint64_t wdog:4;
+	} cn52xx;
+	struct cvmx_ciu_intx_en1_cn52xxp1 {
+		uint64_t reserved_19_63:45;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t reserved_4_15:12;
+		uint64_t wdog:4;
+	} cn52xxp1;
+	struct cvmx_ciu_intx_en1_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t wdog:12;
+	} cn56xx;
+	struct cvmx_ciu_intx_en1_cn56xx cn56xxp1;
+	struct cvmx_ciu_intx_en1_cn38xx cn58xx;
+	struct cvmx_ciu_intx_en1_cn38xx cn58xxp1;
+};
+
+union cvmx_ciu_intx_en1_w1c {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en1_w1c_s {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t wdog:16;
+	} s;
+	struct cvmx_ciu_intx_en1_w1c_cn52xx {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t reserved_4_15:12;
+		uint64_t wdog:4;
+	} cn52xx;
+	struct cvmx_ciu_intx_en1_w1c_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t wdog:12;
+	} cn56xx;
+	struct cvmx_ciu_intx_en1_w1c_cn58xx {
+		uint64_t reserved_16_63:48;
+		uint64_t wdog:16;
+	} cn58xx;
+};
+
+union cvmx_ciu_intx_en1_w1s {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en1_w1s_s {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t wdog:16;
+	} s;
+	struct cvmx_ciu_intx_en1_w1s_cn52xx {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t reserved_4_15:12;
+		uint64_t wdog:4;
+	} cn52xx;
+	struct cvmx_ciu_intx_en1_w1s_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t wdog:12;
+	} cn56xx;
+	struct cvmx_ciu_intx_en1_w1s_cn58xx {
+		uint64_t reserved_16_63:48;
+		uint64_t wdog:16;
+	} cn58xx;
+};
+
+union cvmx_ciu_intx_en4_0 {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en4_0_s {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t mpi:1;
+		uint64_t pcm:1;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} s;
+	struct cvmx_ciu_intx_en4_0_cn50xx {
+		uint64_t reserved_59_63:5;
+		uint64_t mpi:1;
+		uint64_t pcm:1;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t reserved_47_47:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn50xx;
+	struct cvmx_ciu_intx_en4_0_cn52xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn52xx;
+	struct cvmx_ciu_intx_en4_0_cn52xx cn52xxp1;
+	struct cvmx_ciu_intx_en4_0_cn56xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn56xx;
+	struct cvmx_ciu_intx_en4_0_cn56xx cn56xxp1;
+	struct cvmx_ciu_intx_en4_0_cn58xx {
+		uint64_t reserved_56_63:8;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn58xx;
+	struct cvmx_ciu_intx_en4_0_cn58xx cn58xxp1;
+};
+
+union cvmx_ciu_intx_en4_0_w1c {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en4_0_w1c_s {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} s;
+	struct cvmx_ciu_intx_en4_0_w1c_cn52xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn52xx;
+	struct cvmx_ciu_intx_en4_0_w1c_s cn56xx;
+	struct cvmx_ciu_intx_en4_0_w1c_cn58xx {
+		uint64_t reserved_56_63:8;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn58xx;
+};
+
+union cvmx_ciu_intx_en4_0_w1s {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en4_0_w1s_s {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} s;
+	struct cvmx_ciu_intx_en4_0_w1s_cn52xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn52xx;
+	struct cvmx_ciu_intx_en4_0_w1s_s cn56xx;
+	struct cvmx_ciu_intx_en4_0_w1s_cn58xx {
+		uint64_t reserved_56_63:8;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t reserved_44_44:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn58xx;
+};
+
+union cvmx_ciu_intx_en4_1 {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en4_1_s {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t wdog:16;
+	} s;
+	struct cvmx_ciu_intx_en4_1_cn50xx {
+		uint64_t reserved_2_63:62;
+		uint64_t wdog:2;
+	} cn50xx;
+	struct cvmx_ciu_intx_en4_1_cn52xx {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t reserved_4_15:12;
+		uint64_t wdog:4;
+	} cn52xx;
+	struct cvmx_ciu_intx_en4_1_cn52xxp1 {
+		uint64_t reserved_19_63:45;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t reserved_4_15:12;
+		uint64_t wdog:4;
+	} cn52xxp1;
+	struct cvmx_ciu_intx_en4_1_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t wdog:12;
+	} cn56xx;
+	struct cvmx_ciu_intx_en4_1_cn56xx cn56xxp1;
+	struct cvmx_ciu_intx_en4_1_cn58xx {
+		uint64_t reserved_16_63:48;
+		uint64_t wdog:16;
+	} cn58xx;
+	struct cvmx_ciu_intx_en4_1_cn58xx cn58xxp1;
+};
+
+union cvmx_ciu_intx_en4_1_w1c {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en4_1_w1c_s {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t wdog:16;
+	} s;
+	struct cvmx_ciu_intx_en4_1_w1c_cn52xx {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t reserved_4_15:12;
+		uint64_t wdog:4;
+	} cn52xx;
+	struct cvmx_ciu_intx_en4_1_w1c_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t wdog:12;
+	} cn56xx;
+	struct cvmx_ciu_intx_en4_1_w1c_cn58xx {
+		uint64_t reserved_16_63:48;
+		uint64_t wdog:16;
+	} cn58xx;
+};
+
+union cvmx_ciu_intx_en4_1_w1s {
+	uint64_t u64;
+	struct cvmx_ciu_intx_en4_1_w1s_s {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t wdog:16;
+	} s;
+	struct cvmx_ciu_intx_en4_1_w1s_cn52xx {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t reserved_4_15:12;
+		uint64_t wdog:4;
+	} cn52xx;
+	struct cvmx_ciu_intx_en4_1_w1s_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t wdog:12;
+	} cn56xx;
+	struct cvmx_ciu_intx_en4_1_w1s_cn58xx {
+		uint64_t reserved_16_63:48;
+		uint64_t wdog:16;
+	} cn58xx;
+};
+
+union cvmx_ciu_intx_sum0 {
+	uint64_t u64;
+	struct cvmx_ciu_intx_sum0_s {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t mpi:1;
+		uint64_t pcm:1;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} s;
+	struct cvmx_ciu_intx_sum0_cn30xx {
+		uint64_t reserved_59_63:5;
+		uint64_t mpi:1;
+		uint64_t pcm:1;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t reserved_47_47:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn30xx;
+	struct cvmx_ciu_intx_sum0_cn31xx {
+		uint64_t reserved_59_63:5;
+		uint64_t mpi:1;
+		uint64_t pcm:1;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn31xx;
+	struct cvmx_ciu_intx_sum0_cn38xx {
+		uint64_t reserved_56_63:8;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn38xx;
+	struct cvmx_ciu_intx_sum0_cn38xx cn38xxp2;
+	struct cvmx_ciu_intx_sum0_cn30xx cn50xx;
+	struct cvmx_ciu_intx_sum0_cn52xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn52xx;
+	struct cvmx_ciu_intx_sum0_cn52xx cn52xxp1;
+	struct cvmx_ciu_intx_sum0_cn56xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn56xx;
+	struct cvmx_ciu_intx_sum0_cn56xx cn56xxp1;
+	struct cvmx_ciu_intx_sum0_cn38xx cn58xx;
+	struct cvmx_ciu_intx_sum0_cn38xx cn58xxp1;
+};
+
+union cvmx_ciu_intx_sum4 {
+	uint64_t u64;
+	struct cvmx_ciu_intx_sum4_s {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t mpi:1;
+		uint64_t pcm:1;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} s;
+	struct cvmx_ciu_intx_sum4_cn50xx {
+		uint64_t reserved_59_63:5;
+		uint64_t mpi:1;
+		uint64_t pcm:1;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t reserved_47_47:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn50xx;
+	struct cvmx_ciu_intx_sum4_cn52xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t reserved_51_51:1;
+		uint64_t ipd_drp:1;
+		uint64_t reserved_49_49:1;
+		uint64_t gmx_drp:1;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn52xx;
+	struct cvmx_ciu_intx_sum4_cn52xx cn52xxp1;
+	struct cvmx_ciu_intx_sum4_cn56xx {
+		uint64_t bootdma:1;
+		uint64_t mii:1;
+		uint64_t ipdppthr:1;
+		uint64_t powiq:1;
+		uint64_t twsi2:1;
+		uint64_t reserved_57_58:2;
+		uint64_t usb:1;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn56xx;
+	struct cvmx_ciu_intx_sum4_cn56xx cn56xxp1;
+	struct cvmx_ciu_intx_sum4_cn58xx {
+		uint64_t reserved_56_63:8;
+		uint64_t timer:4;
+		uint64_t key_zero:1;
+		uint64_t ipd_drp:1;
+		uint64_t gmx_drp:2;
+		uint64_t trace:1;
+		uint64_t rml:1;
+		uint64_t twsi:1;
+		uint64_t wdog_sum:1;
+		uint64_t pci_msi:4;
+		uint64_t pci_int:4;
+		uint64_t uart:2;
+		uint64_t mbox:2;
+		uint64_t gpio:16;
+		uint64_t workq:16;
+	} cn58xx;
+	struct cvmx_ciu_intx_sum4_cn58xx cn58xxp1;
+};
+
+union cvmx_ciu_int_sum1 {
+	uint64_t u64;
+	struct cvmx_ciu_int_sum1_s {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t wdog:16;
+	} s;
+	struct cvmx_ciu_int_sum1_cn30xx {
+		uint64_t reserved_1_63:63;
+		uint64_t wdog:1;
+	} cn30xx;
+	struct cvmx_ciu_int_sum1_cn31xx {
+		uint64_t reserved_2_63:62;
+		uint64_t wdog:2;
+	} cn31xx;
+	struct cvmx_ciu_int_sum1_cn38xx {
+		uint64_t reserved_16_63:48;
+		uint64_t wdog:16;
+	} cn38xx;
+	struct cvmx_ciu_int_sum1_cn38xx cn38xxp2;
+	struct cvmx_ciu_int_sum1_cn31xx cn50xx;
+	struct cvmx_ciu_int_sum1_cn52xx {
+		uint64_t reserved_20_63:44;
+		uint64_t nand:1;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t reserved_4_15:12;
+		uint64_t wdog:4;
+	} cn52xx;
+	struct cvmx_ciu_int_sum1_cn52xxp1 {
+		uint64_t reserved_19_63:45;
+		uint64_t mii1:1;
+		uint64_t usb1:1;
+		uint64_t uart2:1;
+		uint64_t reserved_4_15:12;
+		uint64_t wdog:4;
+	} cn52xxp1;
+	struct cvmx_ciu_int_sum1_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t wdog:12;
+	} cn56xx;
+	struct cvmx_ciu_int_sum1_cn56xx cn56xxp1;
+	struct cvmx_ciu_int_sum1_cn38xx cn58xx;
+	struct cvmx_ciu_int_sum1_cn38xx cn58xxp1;
+};
+
+union cvmx_ciu_mbox_clrx {
+	uint64_t u64;
+	struct cvmx_ciu_mbox_clrx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t bits:32;
+	} s;
+	struct cvmx_ciu_mbox_clrx_s cn30xx;
+	struct cvmx_ciu_mbox_clrx_s cn31xx;
+	struct cvmx_ciu_mbox_clrx_s cn38xx;
+	struct cvmx_ciu_mbox_clrx_s cn38xxp2;
+	struct cvmx_ciu_mbox_clrx_s cn50xx;
+	struct cvmx_ciu_mbox_clrx_s cn52xx;
+	struct cvmx_ciu_mbox_clrx_s cn52xxp1;
+	struct cvmx_ciu_mbox_clrx_s cn56xx;
+	struct cvmx_ciu_mbox_clrx_s cn56xxp1;
+	struct cvmx_ciu_mbox_clrx_s cn58xx;
+	struct cvmx_ciu_mbox_clrx_s cn58xxp1;
+};
+
+union cvmx_ciu_mbox_setx {
+	uint64_t u64;
+	struct cvmx_ciu_mbox_setx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t bits:32;
+	} s;
+	struct cvmx_ciu_mbox_setx_s cn30xx;
+	struct cvmx_ciu_mbox_setx_s cn31xx;
+	struct cvmx_ciu_mbox_setx_s cn38xx;
+	struct cvmx_ciu_mbox_setx_s cn38xxp2;
+	struct cvmx_ciu_mbox_setx_s cn50xx;
+	struct cvmx_ciu_mbox_setx_s cn52xx;
+	struct cvmx_ciu_mbox_setx_s cn52xxp1;
+	struct cvmx_ciu_mbox_setx_s cn56xx;
+	struct cvmx_ciu_mbox_setx_s cn56xxp1;
+	struct cvmx_ciu_mbox_setx_s cn58xx;
+	struct cvmx_ciu_mbox_setx_s cn58xxp1;
+};
+
+union cvmx_ciu_nmi {
+	uint64_t u64;
+	struct cvmx_ciu_nmi_s {
+		uint64_t reserved_16_63:48;
+		uint64_t nmi:16;
+	} s;
+	struct cvmx_ciu_nmi_cn30xx {
+		uint64_t reserved_1_63:63;
+		uint64_t nmi:1;
+	} cn30xx;
+	struct cvmx_ciu_nmi_cn31xx {
+		uint64_t reserved_2_63:62;
+		uint64_t nmi:2;
+	} cn31xx;
+	struct cvmx_ciu_nmi_s cn38xx;
+	struct cvmx_ciu_nmi_s cn38xxp2;
+	struct cvmx_ciu_nmi_cn31xx cn50xx;
+	struct cvmx_ciu_nmi_cn52xx {
+		uint64_t reserved_4_63:60;
+		uint64_t nmi:4;
+	} cn52xx;
+	struct cvmx_ciu_nmi_cn52xx cn52xxp1;
+	struct cvmx_ciu_nmi_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t nmi:12;
+	} cn56xx;
+	struct cvmx_ciu_nmi_cn56xx cn56xxp1;
+	struct cvmx_ciu_nmi_s cn58xx;
+	struct cvmx_ciu_nmi_s cn58xxp1;
+};
+
+union cvmx_ciu_pci_inta {
+	uint64_t u64;
+	struct cvmx_ciu_pci_inta_s {
+		uint64_t reserved_2_63:62;
+		uint64_t intr:2;
+	} s;
+	struct cvmx_ciu_pci_inta_s cn30xx;
+	struct cvmx_ciu_pci_inta_s cn31xx;
+	struct cvmx_ciu_pci_inta_s cn38xx;
+	struct cvmx_ciu_pci_inta_s cn38xxp2;
+	struct cvmx_ciu_pci_inta_s cn50xx;
+	struct cvmx_ciu_pci_inta_s cn52xx;
+	struct cvmx_ciu_pci_inta_s cn52xxp1;
+	struct cvmx_ciu_pci_inta_s cn56xx;
+	struct cvmx_ciu_pci_inta_s cn56xxp1;
+	struct cvmx_ciu_pci_inta_s cn58xx;
+	struct cvmx_ciu_pci_inta_s cn58xxp1;
+};
+
+union cvmx_ciu_pp_dbg {
+	uint64_t u64;
+	struct cvmx_ciu_pp_dbg_s {
+		uint64_t reserved_16_63:48;
+		uint64_t ppdbg:16;
+	} s;
+	struct cvmx_ciu_pp_dbg_cn30xx {
+		uint64_t reserved_1_63:63;
+		uint64_t ppdbg:1;
+	} cn30xx;
+	struct cvmx_ciu_pp_dbg_cn31xx {
+		uint64_t reserved_2_63:62;
+		uint64_t ppdbg:2;
+	} cn31xx;
+	struct cvmx_ciu_pp_dbg_s cn38xx;
+	struct cvmx_ciu_pp_dbg_s cn38xxp2;
+	struct cvmx_ciu_pp_dbg_cn31xx cn50xx;
+	struct cvmx_ciu_pp_dbg_cn52xx {
+		uint64_t reserved_4_63:60;
+		uint64_t ppdbg:4;
+	} cn52xx;
+	struct cvmx_ciu_pp_dbg_cn52xx cn52xxp1;
+	struct cvmx_ciu_pp_dbg_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t ppdbg:12;
+	} cn56xx;
+	struct cvmx_ciu_pp_dbg_cn56xx cn56xxp1;
+	struct cvmx_ciu_pp_dbg_s cn58xx;
+	struct cvmx_ciu_pp_dbg_s cn58xxp1;
+};
+
+union cvmx_ciu_pp_pokex {
+	uint64_t u64;
+	struct cvmx_ciu_pp_pokex_s {
+		uint64_t reserved_0_63:64;
+	} s;
+	struct cvmx_ciu_pp_pokex_s cn30xx;
+	struct cvmx_ciu_pp_pokex_s cn31xx;
+	struct cvmx_ciu_pp_pokex_s cn38xx;
+	struct cvmx_ciu_pp_pokex_s cn38xxp2;
+	struct cvmx_ciu_pp_pokex_s cn50xx;
+	struct cvmx_ciu_pp_pokex_s cn52xx;
+	struct cvmx_ciu_pp_pokex_s cn52xxp1;
+	struct cvmx_ciu_pp_pokex_s cn56xx;
+	struct cvmx_ciu_pp_pokex_s cn56xxp1;
+	struct cvmx_ciu_pp_pokex_s cn58xx;
+	struct cvmx_ciu_pp_pokex_s cn58xxp1;
+};
+
+union cvmx_ciu_pp_rst {
+	uint64_t u64;
+	struct cvmx_ciu_pp_rst_s {
+		uint64_t reserved_16_63:48;
+		uint64_t rst:15;
+		uint64_t rst0:1;
+	} s;
+	struct cvmx_ciu_pp_rst_cn30xx {
+		uint64_t reserved_1_63:63;
+		uint64_t rst0:1;
+	} cn30xx;
+	struct cvmx_ciu_pp_rst_cn31xx {
+		uint64_t reserved_2_63:62;
+		uint64_t rst:1;
+		uint64_t rst0:1;
+	} cn31xx;
+	struct cvmx_ciu_pp_rst_s cn38xx;
+	struct cvmx_ciu_pp_rst_s cn38xxp2;
+	struct cvmx_ciu_pp_rst_cn31xx cn50xx;
+	struct cvmx_ciu_pp_rst_cn52xx {
+		uint64_t reserved_4_63:60;
+		uint64_t rst:3;
+		uint64_t rst0:1;
+	} cn52xx;
+	struct cvmx_ciu_pp_rst_cn52xx cn52xxp1;
+	struct cvmx_ciu_pp_rst_cn56xx {
+		uint64_t reserved_12_63:52;
+		uint64_t rst:11;
+		uint64_t rst0:1;
+	} cn56xx;
+	struct cvmx_ciu_pp_rst_cn56xx cn56xxp1;
+	struct cvmx_ciu_pp_rst_s cn58xx;
+	struct cvmx_ciu_pp_rst_s cn58xxp1;
+};
+
+union cvmx_ciu_qlm_dcok {
+	uint64_t u64;
+	struct cvmx_ciu_qlm_dcok_s {
+		uint64_t reserved_4_63:60;
+		uint64_t qlm_dcok:4;
+	} s;
+	struct cvmx_ciu_qlm_dcok_cn52xx {
+		uint64_t reserved_2_63:62;
+		uint64_t qlm_dcok:2;
+	} cn52xx;
+	struct cvmx_ciu_qlm_dcok_cn52xx cn52xxp1;
+	struct cvmx_ciu_qlm_dcok_s cn56xx;
+	struct cvmx_ciu_qlm_dcok_s cn56xxp1;
+};
+
+union cvmx_ciu_qlm_jtgc {
+	uint64_t u64;
+	struct cvmx_ciu_qlm_jtgc_s {
+		uint64_t reserved_11_63:53;
+		uint64_t clk_div:3;
+		uint64_t reserved_6_7:2;
+		uint64_t mux_sel:2;
+		uint64_t bypass:4;
+	} s;
+	struct cvmx_ciu_qlm_jtgc_cn52xx {
+		uint64_t reserved_11_63:53;
+		uint64_t clk_div:3;
+		uint64_t reserved_5_7:3;
+		uint64_t mux_sel:1;
+		uint64_t reserved_2_3:2;
+		uint64_t bypass:2;
+	} cn52xx;
+	struct cvmx_ciu_qlm_jtgc_cn52xx cn52xxp1;
+	struct cvmx_ciu_qlm_jtgc_s cn56xx;
+	struct cvmx_ciu_qlm_jtgc_s cn56xxp1;
+};
+
+union cvmx_ciu_qlm_jtgd {
+	uint64_t u64;
+	struct cvmx_ciu_qlm_jtgd_s {
+		uint64_t capture:1;
+		uint64_t shift:1;
+		uint64_t update:1;
+		uint64_t reserved_44_60:17;
+		uint64_t select:4;
+		uint64_t reserved_37_39:3;
+		uint64_t shft_cnt:5;
+		uint64_t shft_reg:32;
+	} s;
+	struct cvmx_ciu_qlm_jtgd_cn52xx {
+		uint64_t capture:1;
+		uint64_t shift:1;
+		uint64_t update:1;
+		uint64_t reserved_42_60:19;
+		uint64_t select:2;
+		uint64_t reserved_37_39:3;
+		uint64_t shft_cnt:5;
+		uint64_t shft_reg:32;
+	} cn52xx;
+	struct cvmx_ciu_qlm_jtgd_cn52xx cn52xxp1;
+	struct cvmx_ciu_qlm_jtgd_s cn56xx;
+	struct cvmx_ciu_qlm_jtgd_cn56xxp1 {
+		uint64_t capture:1;
+		uint64_t shift:1;
+		uint64_t update:1;
+		uint64_t reserved_37_60:24;
+		uint64_t shft_cnt:5;
+		uint64_t shft_reg:32;
+	} cn56xxp1;
+};
+
+union cvmx_ciu_soft_bist {
+	uint64_t u64;
+	struct cvmx_ciu_soft_bist_s {
+		uint64_t reserved_1_63:63;
+		uint64_t soft_bist:1;
+	} s;
+	struct cvmx_ciu_soft_bist_s cn30xx;
+	struct cvmx_ciu_soft_bist_s cn31xx;
+	struct cvmx_ciu_soft_bist_s cn38xx;
+	struct cvmx_ciu_soft_bist_s cn38xxp2;
+	struct cvmx_ciu_soft_bist_s cn50xx;
+	struct cvmx_ciu_soft_bist_s cn52xx;
+	struct cvmx_ciu_soft_bist_s cn52xxp1;
+	struct cvmx_ciu_soft_bist_s cn56xx;
+	struct cvmx_ciu_soft_bist_s cn56xxp1;
+	struct cvmx_ciu_soft_bist_s cn58xx;
+	struct cvmx_ciu_soft_bist_s cn58xxp1;
+};
+
+union cvmx_ciu_soft_prst {
+	uint64_t u64;
+	struct cvmx_ciu_soft_prst_s {
+		uint64_t reserved_3_63:61;
+		uint64_t host64:1;
+		uint64_t npi:1;
+		uint64_t soft_prst:1;
+	} s;
+	struct cvmx_ciu_soft_prst_s cn30xx;
+	struct cvmx_ciu_soft_prst_s cn31xx;
+	struct cvmx_ciu_soft_prst_s cn38xx;
+	struct cvmx_ciu_soft_prst_s cn38xxp2;
+	struct cvmx_ciu_soft_prst_s cn50xx;
+	struct cvmx_ciu_soft_prst_cn52xx {
+		uint64_t reserved_1_63:63;
+		uint64_t soft_prst:1;
+	} cn52xx;
+	struct cvmx_ciu_soft_prst_cn52xx cn52xxp1;
+	struct cvmx_ciu_soft_prst_cn52xx cn56xx;
+	struct cvmx_ciu_soft_prst_cn52xx cn56xxp1;
+	struct cvmx_ciu_soft_prst_s cn58xx;
+	struct cvmx_ciu_soft_prst_s cn58xxp1;
+};
+
+union cvmx_ciu_soft_prst1 {
+	uint64_t u64;
+	struct cvmx_ciu_soft_prst1_s {
+		uint64_t reserved_1_63:63;
+		uint64_t soft_prst:1;
+	} s;
+	struct cvmx_ciu_soft_prst1_s cn52xx;
+	struct cvmx_ciu_soft_prst1_s cn52xxp1;
+	struct cvmx_ciu_soft_prst1_s cn56xx;
+	struct cvmx_ciu_soft_prst1_s cn56xxp1;
+};
+
+union cvmx_ciu_soft_rst {
+	uint64_t u64;
+	struct cvmx_ciu_soft_rst_s {
+		uint64_t reserved_1_63:63;
+		uint64_t soft_rst:1;
+	} s;
+	struct cvmx_ciu_soft_rst_s cn30xx;
+	struct cvmx_ciu_soft_rst_s cn31xx;
+	struct cvmx_ciu_soft_rst_s cn38xx;
+	struct cvmx_ciu_soft_rst_s cn38xxp2;
+	struct cvmx_ciu_soft_rst_s cn50xx;
+	struct cvmx_ciu_soft_rst_s cn52xx;
+	struct cvmx_ciu_soft_rst_s cn52xxp1;
+	struct cvmx_ciu_soft_rst_s cn56xx;
+	struct cvmx_ciu_soft_rst_s cn56xxp1;
+	struct cvmx_ciu_soft_rst_s cn58xx;
+	struct cvmx_ciu_soft_rst_s cn58xxp1;
+};
+
+union cvmx_ciu_timx {
+	uint64_t u64;
+	struct cvmx_ciu_timx_s {
+		uint64_t reserved_37_63:27;
+		uint64_t one_shot:1;
+		uint64_t len:36;
+	} s;
+	struct cvmx_ciu_timx_s cn30xx;
+	struct cvmx_ciu_timx_s cn31xx;
+	struct cvmx_ciu_timx_s cn38xx;
+	struct cvmx_ciu_timx_s cn38xxp2;
+	struct cvmx_ciu_timx_s cn50xx;
+	struct cvmx_ciu_timx_s cn52xx;
+	struct cvmx_ciu_timx_s cn52xxp1;
+	struct cvmx_ciu_timx_s cn56xx;
+	struct cvmx_ciu_timx_s cn56xxp1;
+	struct cvmx_ciu_timx_s cn58xx;
+	struct cvmx_ciu_timx_s cn58xxp1;
+};
+
+union cvmx_ciu_wdogx {
+	uint64_t u64;
+	struct cvmx_ciu_wdogx_s {
+		uint64_t reserved_46_63:18;
+		uint64_t gstopen:1;
+		uint64_t dstop:1;
+		uint64_t cnt:24;
+		uint64_t len:16;
+		uint64_t state:2;
+		uint64_t mode:2;
+	} s;
+	struct cvmx_ciu_wdogx_s cn30xx;
+	struct cvmx_ciu_wdogx_s cn31xx;
+	struct cvmx_ciu_wdogx_s cn38xx;
+	struct cvmx_ciu_wdogx_s cn38xxp2;
+	struct cvmx_ciu_wdogx_s cn50xx;
+	struct cvmx_ciu_wdogx_s cn52xx;
+	struct cvmx_ciu_wdogx_s cn52xxp1;
+	struct cvmx_ciu_wdogx_s cn56xx;
+	struct cvmx_ciu_wdogx_s cn56xxp1;
+	struct cvmx_ciu_wdogx_s cn58xx;
+	struct cvmx_ciu_wdogx_s cn58xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-gpio-defs.h b/arch/mips/include/asm/octeon/cvmx-gpio-defs.h
new file mode 100644
index 00000000000..5fdd6ba48a0
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-gpio-defs.h
@@ -0,0 +1,219 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_GPIO_DEFS_H__
+#define __CVMX_GPIO_DEFS_H__
+
+#define CVMX_GPIO_BIT_CFGX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000800ull + (((offset) & 15) * 8))
+#define CVMX_GPIO_BOOT_ENA \
+	 CVMX_ADD_IO_SEG(0x00010700000008A8ull)
+#define CVMX_GPIO_CLK_GENX(offset) \
+	 CVMX_ADD_IO_SEG(0x00010700000008C0ull + (((offset) & 3) * 8))
+#define CVMX_GPIO_DBG_ENA \
+	 CVMX_ADD_IO_SEG(0x00010700000008A0ull)
+#define CVMX_GPIO_INT_CLR \
+	 CVMX_ADD_IO_SEG(0x0001070000000898ull)
+#define CVMX_GPIO_RX_DAT \
+	 CVMX_ADD_IO_SEG(0x0001070000000880ull)
+#define CVMX_GPIO_TX_CLR \
+	 CVMX_ADD_IO_SEG(0x0001070000000890ull)
+#define CVMX_GPIO_TX_SET \
+	 CVMX_ADD_IO_SEG(0x0001070000000888ull)
+#define CVMX_GPIO_XBIT_CFGX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001070000000900ull + (((offset) & 31) * 8) - 8 * 16)
+
+union cvmx_gpio_bit_cfgx {
+	uint64_t u64;
+	struct cvmx_gpio_bit_cfgx_s {
+		uint64_t reserved_15_63:49;
+		uint64_t clk_gen:1;
+		uint64_t clk_sel:2;
+		uint64_t fil_sel:4;
+		uint64_t fil_cnt:4;
+		uint64_t int_type:1;
+		uint64_t int_en:1;
+		uint64_t rx_xor:1;
+		uint64_t tx_oe:1;
+	} s;
+	struct cvmx_gpio_bit_cfgx_cn30xx {
+		uint64_t reserved_12_63:52;
+		uint64_t fil_sel:4;
+		uint64_t fil_cnt:4;
+		uint64_t int_type:1;
+		uint64_t int_en:1;
+		uint64_t rx_xor:1;
+		uint64_t tx_oe:1;
+	} cn30xx;
+	struct cvmx_gpio_bit_cfgx_cn30xx cn31xx;
+	struct cvmx_gpio_bit_cfgx_cn30xx cn38xx;
+	struct cvmx_gpio_bit_cfgx_cn30xx cn38xxp2;
+	struct cvmx_gpio_bit_cfgx_cn30xx cn50xx;
+	struct cvmx_gpio_bit_cfgx_s cn52xx;
+	struct cvmx_gpio_bit_cfgx_s cn52xxp1;
+	struct cvmx_gpio_bit_cfgx_s cn56xx;
+	struct cvmx_gpio_bit_cfgx_s cn56xxp1;
+	struct cvmx_gpio_bit_cfgx_cn30xx cn58xx;
+	struct cvmx_gpio_bit_cfgx_cn30xx cn58xxp1;
+};
+
+union cvmx_gpio_boot_ena {
+	uint64_t u64;
+	struct cvmx_gpio_boot_ena_s {
+		uint64_t reserved_12_63:52;
+		uint64_t boot_ena:4;
+		uint64_t reserved_0_7:8;
+	} s;
+	struct cvmx_gpio_boot_ena_s cn30xx;
+	struct cvmx_gpio_boot_ena_s cn31xx;
+	struct cvmx_gpio_boot_ena_s cn50xx;
+};
+
+union cvmx_gpio_clk_genx {
+	uint64_t u64;
+	struct cvmx_gpio_clk_genx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t n:32;
+	} s;
+	struct cvmx_gpio_clk_genx_s cn52xx;
+	struct cvmx_gpio_clk_genx_s cn52xxp1;
+	struct cvmx_gpio_clk_genx_s cn56xx;
+	struct cvmx_gpio_clk_genx_s cn56xxp1;
+};
+
+union cvmx_gpio_dbg_ena {
+	uint64_t u64;
+	struct cvmx_gpio_dbg_ena_s {
+		uint64_t reserved_21_63:43;
+		uint64_t dbg_ena:21;
+	} s;
+	struct cvmx_gpio_dbg_ena_s cn30xx;
+	struct cvmx_gpio_dbg_ena_s cn31xx;
+	struct cvmx_gpio_dbg_ena_s cn50xx;
+};
+
+union cvmx_gpio_int_clr {
+	uint64_t u64;
+	struct cvmx_gpio_int_clr_s {
+		uint64_t reserved_16_63:48;
+		uint64_t type:16;
+	} s;
+	struct cvmx_gpio_int_clr_s cn30xx;
+	struct cvmx_gpio_int_clr_s cn31xx;
+	struct cvmx_gpio_int_clr_s cn38xx;
+	struct cvmx_gpio_int_clr_s cn38xxp2;
+	struct cvmx_gpio_int_clr_s cn50xx;
+	struct cvmx_gpio_int_clr_s cn52xx;
+	struct cvmx_gpio_int_clr_s cn52xxp1;
+	struct cvmx_gpio_int_clr_s cn56xx;
+	struct cvmx_gpio_int_clr_s cn56xxp1;
+	struct cvmx_gpio_int_clr_s cn58xx;
+	struct cvmx_gpio_int_clr_s cn58xxp1;
+};
+
+union cvmx_gpio_rx_dat {
+	uint64_t u64;
+	struct cvmx_gpio_rx_dat_s {
+		uint64_t reserved_24_63:40;
+		uint64_t dat:24;
+	} s;
+	struct cvmx_gpio_rx_dat_s cn30xx;
+	struct cvmx_gpio_rx_dat_s cn31xx;
+	struct cvmx_gpio_rx_dat_cn38xx {
+		uint64_t reserved_16_63:48;
+		uint64_t dat:16;
+	} cn38xx;
+	struct cvmx_gpio_rx_dat_cn38xx cn38xxp2;
+	struct cvmx_gpio_rx_dat_s cn50xx;
+	struct cvmx_gpio_rx_dat_cn38xx cn52xx;
+	struct cvmx_gpio_rx_dat_cn38xx cn52xxp1;
+	struct cvmx_gpio_rx_dat_cn38xx cn56xx;
+	struct cvmx_gpio_rx_dat_cn38xx cn56xxp1;
+	struct cvmx_gpio_rx_dat_cn38xx cn58xx;
+	struct cvmx_gpio_rx_dat_cn38xx cn58xxp1;
+};
+
+union cvmx_gpio_tx_clr {
+	uint64_t u64;
+	struct cvmx_gpio_tx_clr_s {
+		uint64_t reserved_24_63:40;
+		uint64_t clr:24;
+	} s;
+	struct cvmx_gpio_tx_clr_s cn30xx;
+	struct cvmx_gpio_tx_clr_s cn31xx;
+	struct cvmx_gpio_tx_clr_cn38xx {
+		uint64_t reserved_16_63:48;
+		uint64_t clr:16;
+	} cn38xx;
+	struct cvmx_gpio_tx_clr_cn38xx cn38xxp2;
+	struct cvmx_gpio_tx_clr_s cn50xx;
+	struct cvmx_gpio_tx_clr_cn38xx cn52xx;
+	struct cvmx_gpio_tx_clr_cn38xx cn52xxp1;
+	struct cvmx_gpio_tx_clr_cn38xx cn56xx;
+	struct cvmx_gpio_tx_clr_cn38xx cn56xxp1;
+	struct cvmx_gpio_tx_clr_cn38xx cn58xx;
+	struct cvmx_gpio_tx_clr_cn38xx cn58xxp1;
+};
+
+union cvmx_gpio_tx_set {
+	uint64_t u64;
+	struct cvmx_gpio_tx_set_s {
+		uint64_t reserved_24_63:40;
+		uint64_t set:24;
+	} s;
+	struct cvmx_gpio_tx_set_s cn30xx;
+	struct cvmx_gpio_tx_set_s cn31xx;
+	struct cvmx_gpio_tx_set_cn38xx {
+		uint64_t reserved_16_63:48;
+		uint64_t set:16;
+	} cn38xx;
+	struct cvmx_gpio_tx_set_cn38xx cn38xxp2;
+	struct cvmx_gpio_tx_set_s cn50xx;
+	struct cvmx_gpio_tx_set_cn38xx cn52xx;
+	struct cvmx_gpio_tx_set_cn38xx cn52xxp1;
+	struct cvmx_gpio_tx_set_cn38xx cn56xx;
+	struct cvmx_gpio_tx_set_cn38xx cn56xxp1;
+	struct cvmx_gpio_tx_set_cn38xx cn58xx;
+	struct cvmx_gpio_tx_set_cn38xx cn58xxp1;
+};
+
+union cvmx_gpio_xbit_cfgx {
+	uint64_t u64;
+	struct cvmx_gpio_xbit_cfgx_s {
+		uint64_t reserved_12_63:52;
+		uint64_t fil_sel:4;
+		uint64_t fil_cnt:4;
+		uint64_t reserved_2_3:2;
+		uint64_t rx_xor:1;
+		uint64_t tx_oe:1;
+	} s;
+	struct cvmx_gpio_xbit_cfgx_s cn30xx;
+	struct cvmx_gpio_xbit_cfgx_s cn31xx;
+	struct cvmx_gpio_xbit_cfgx_s cn50xx;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-iob-defs.h b/arch/mips/include/asm/octeon/cvmx-iob-defs.h
new file mode 100644
index 00000000000..0ee36baec50
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-iob-defs.h
@@ -0,0 +1,530 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_IOB_DEFS_H__
+#define __CVMX_IOB_DEFS_H__
+
+#define CVMX_IOB_BIST_STATUS \
+	 CVMX_ADD_IO_SEG(0x00011800F00007F8ull)
+#define CVMX_IOB_CTL_STATUS \
+	 CVMX_ADD_IO_SEG(0x00011800F0000050ull)
+#define CVMX_IOB_DWB_PRI_CNT \
+	 CVMX_ADD_IO_SEG(0x00011800F0000028ull)
+#define CVMX_IOB_FAU_TIMEOUT \
+	 CVMX_ADD_IO_SEG(0x00011800F0000000ull)
+#define CVMX_IOB_I2C_PRI_CNT \
+	 CVMX_ADD_IO_SEG(0x00011800F0000010ull)
+#define CVMX_IOB_INB_CONTROL_MATCH \
+	 CVMX_ADD_IO_SEG(0x00011800F0000078ull)
+#define CVMX_IOB_INB_CONTROL_MATCH_ENB \
+	 CVMX_ADD_IO_SEG(0x00011800F0000088ull)
+#define CVMX_IOB_INB_DATA_MATCH \
+	 CVMX_ADD_IO_SEG(0x00011800F0000070ull)
+#define CVMX_IOB_INB_DATA_MATCH_ENB \
+	 CVMX_ADD_IO_SEG(0x00011800F0000080ull)
+#define CVMX_IOB_INT_ENB \
+	 CVMX_ADD_IO_SEG(0x00011800F0000060ull)
+#define CVMX_IOB_INT_SUM \
+	 CVMX_ADD_IO_SEG(0x00011800F0000058ull)
+#define CVMX_IOB_N2C_L2C_PRI_CNT \
+	 CVMX_ADD_IO_SEG(0x00011800F0000020ull)
+#define CVMX_IOB_N2C_RSP_PRI_CNT \
+	 CVMX_ADD_IO_SEG(0x00011800F0000008ull)
+#define CVMX_IOB_OUTB_COM_PRI_CNT \
+	 CVMX_ADD_IO_SEG(0x00011800F0000040ull)
+#define CVMX_IOB_OUTB_CONTROL_MATCH \
+	 CVMX_ADD_IO_SEG(0x00011800F0000098ull)
+#define CVMX_IOB_OUTB_CONTROL_MATCH_ENB \
+	 CVMX_ADD_IO_SEG(0x00011800F00000A8ull)
+#define CVMX_IOB_OUTB_DATA_MATCH \
+	 CVMX_ADD_IO_SEG(0x00011800F0000090ull)
+#define CVMX_IOB_OUTB_DATA_MATCH_ENB \
+	 CVMX_ADD_IO_SEG(0x00011800F00000A0ull)
+#define CVMX_IOB_OUTB_FPA_PRI_CNT \
+	 CVMX_ADD_IO_SEG(0x00011800F0000048ull)
+#define CVMX_IOB_OUTB_REQ_PRI_CNT \
+	 CVMX_ADD_IO_SEG(0x00011800F0000038ull)
+#define CVMX_IOB_P2C_REQ_PRI_CNT \
+	 CVMX_ADD_IO_SEG(0x00011800F0000018ull)
+#define CVMX_IOB_PKT_ERR \
+	 CVMX_ADD_IO_SEG(0x00011800F0000068ull)
+
+union cvmx_iob_bist_status {
+	uint64_t u64;
+	struct cvmx_iob_bist_status_s {
+		uint64_t reserved_18_63:46;
+		uint64_t icnrcb:1;
+		uint64_t icr0:1;
+		uint64_t icr1:1;
+		uint64_t icnr1:1;
+		uint64_t icnr0:1;
+		uint64_t ibdr0:1;
+		uint64_t ibdr1:1;
+		uint64_t ibr0:1;
+		uint64_t ibr1:1;
+		uint64_t icnrt:1;
+		uint64_t ibrq0:1;
+		uint64_t ibrq1:1;
+		uint64_t icrn0:1;
+		uint64_t icrn1:1;
+		uint64_t icrp0:1;
+		uint64_t icrp1:1;
+		uint64_t ibd:1;
+		uint64_t icd:1;
+	} s;
+	struct cvmx_iob_bist_status_s cn30xx;
+	struct cvmx_iob_bist_status_s cn31xx;
+	struct cvmx_iob_bist_status_s cn38xx;
+	struct cvmx_iob_bist_status_s cn38xxp2;
+	struct cvmx_iob_bist_status_s cn50xx;
+	struct cvmx_iob_bist_status_s cn52xx;
+	struct cvmx_iob_bist_status_s cn52xxp1;
+	struct cvmx_iob_bist_status_s cn56xx;
+	struct cvmx_iob_bist_status_s cn56xxp1;
+	struct cvmx_iob_bist_status_s cn58xx;
+	struct cvmx_iob_bist_status_s cn58xxp1;
+};
+
+union cvmx_iob_ctl_status {
+	uint64_t u64;
+	struct cvmx_iob_ctl_status_s {
+		uint64_t reserved_5_63:59;
+		uint64_t outb_mat:1;
+		uint64_t inb_mat:1;
+		uint64_t pko_enb:1;
+		uint64_t dwb_enb:1;
+		uint64_t fau_end:1;
+	} s;
+	struct cvmx_iob_ctl_status_s cn30xx;
+	struct cvmx_iob_ctl_status_s cn31xx;
+	struct cvmx_iob_ctl_status_s cn38xx;
+	struct cvmx_iob_ctl_status_s cn38xxp2;
+	struct cvmx_iob_ctl_status_s cn50xx;
+	struct cvmx_iob_ctl_status_s cn52xx;
+	struct cvmx_iob_ctl_status_s cn52xxp1;
+	struct cvmx_iob_ctl_status_s cn56xx;
+	struct cvmx_iob_ctl_status_s cn56xxp1;
+	struct cvmx_iob_ctl_status_s cn58xx;
+	struct cvmx_iob_ctl_status_s cn58xxp1;
+};
+
+union cvmx_iob_dwb_pri_cnt {
+	uint64_t u64;
+	struct cvmx_iob_dwb_pri_cnt_s {
+		uint64_t reserved_16_63:48;
+		uint64_t cnt_enb:1;
+		uint64_t cnt_val:15;
+	} s;
+	struct cvmx_iob_dwb_pri_cnt_s cn38xx;
+	struct cvmx_iob_dwb_pri_cnt_s cn38xxp2;
+	struct cvmx_iob_dwb_pri_cnt_s cn52xx;
+	struct cvmx_iob_dwb_pri_cnt_s cn52xxp1;
+	struct cvmx_iob_dwb_pri_cnt_s cn56xx;
+	struct cvmx_iob_dwb_pri_cnt_s cn56xxp1;
+	struct cvmx_iob_dwb_pri_cnt_s cn58xx;
+	struct cvmx_iob_dwb_pri_cnt_s cn58xxp1;
+};
+
+union cvmx_iob_fau_timeout {
+	uint64_t u64;
+	struct cvmx_iob_fau_timeout_s {
+		uint64_t reserved_13_63:51;
+		uint64_t tout_enb:1;
+		uint64_t tout_val:12;
+	} s;
+	struct cvmx_iob_fau_timeout_s cn30xx;
+	struct cvmx_iob_fau_timeout_s cn31xx;
+	struct cvmx_iob_fau_timeout_s cn38xx;
+	struct cvmx_iob_fau_timeout_s cn38xxp2;
+	struct cvmx_iob_fau_timeout_s cn50xx;
+	struct cvmx_iob_fau_timeout_s cn52xx;
+	struct cvmx_iob_fau_timeout_s cn52xxp1;
+	struct cvmx_iob_fau_timeout_s cn56xx;
+	struct cvmx_iob_fau_timeout_s cn56xxp1;
+	struct cvmx_iob_fau_timeout_s cn58xx;
+	struct cvmx_iob_fau_timeout_s cn58xxp1;
+};
+
+union cvmx_iob_i2c_pri_cnt {
+	uint64_t u64;
+	struct cvmx_iob_i2c_pri_cnt_s {
+		uint64_t reserved_16_63:48;
+		uint64_t cnt_enb:1;
+		uint64_t cnt_val:15;
+	} s;
+	struct cvmx_iob_i2c_pri_cnt_s cn38xx;
+	struct cvmx_iob_i2c_pri_cnt_s cn38xxp2;
+	struct cvmx_iob_i2c_pri_cnt_s cn52xx;
+	struct cvmx_iob_i2c_pri_cnt_s cn52xxp1;
+	struct cvmx_iob_i2c_pri_cnt_s cn56xx;
+	struct cvmx_iob_i2c_pri_cnt_s cn56xxp1;
+	struct cvmx_iob_i2c_pri_cnt_s cn58xx;
+	struct cvmx_iob_i2c_pri_cnt_s cn58xxp1;
+};
+
+union cvmx_iob_inb_control_match {
+	uint64_t u64;
+	struct cvmx_iob_inb_control_match_s {
+		uint64_t reserved_29_63:35;
+		uint64_t mask:8;
+		uint64_t opc:4;
+		uint64_t dst:9;
+		uint64_t src:8;
+	} s;
+	struct cvmx_iob_inb_control_match_s cn30xx;
+	struct cvmx_iob_inb_control_match_s cn31xx;
+	struct cvmx_iob_inb_control_match_s cn38xx;
+	struct cvmx_iob_inb_control_match_s cn38xxp2;
+	struct cvmx_iob_inb_control_match_s cn50xx;
+	struct cvmx_iob_inb_control_match_s cn52xx;
+	struct cvmx_iob_inb_control_match_s cn52xxp1;
+	struct cvmx_iob_inb_control_match_s cn56xx;
+	struct cvmx_iob_inb_control_match_s cn56xxp1;
+	struct cvmx_iob_inb_control_match_s cn58xx;
+	struct cvmx_iob_inb_control_match_s cn58xxp1;
+};
+
+union cvmx_iob_inb_control_match_enb {
+	uint64_t u64;
+	struct cvmx_iob_inb_control_match_enb_s {
+		uint64_t reserved_29_63:35;
+		uint64_t mask:8;
+		uint64_t opc:4;
+		uint64_t dst:9;
+		uint64_t src:8;
+	} s;
+	struct cvmx_iob_inb_control_match_enb_s cn30xx;
+	struct cvmx_iob_inb_control_match_enb_s cn31xx;
+	struct cvmx_iob_inb_control_match_enb_s cn38xx;
+	struct cvmx_iob_inb_control_match_enb_s cn38xxp2;
+	struct cvmx_iob_inb_control_match_enb_s cn50xx;
+	struct cvmx_iob_inb_control_match_enb_s cn52xx;
+	struct cvmx_iob_inb_control_match_enb_s cn52xxp1;
+	struct cvmx_iob_inb_control_match_enb_s cn56xx;
+	struct cvmx_iob_inb_control_match_enb_s cn56xxp1;
+	struct cvmx_iob_inb_control_match_enb_s cn58xx;
+	struct cvmx_iob_inb_control_match_enb_s cn58xxp1;
+};
+
+union cvmx_iob_inb_data_match {
+	uint64_t u64;
+	struct cvmx_iob_inb_data_match_s {
+		uint64_t data:64;
+	} s;
+	struct cvmx_iob_inb_data_match_s cn30xx;
+	struct cvmx_iob_inb_data_match_s cn31xx;
+	struct cvmx_iob_inb_data_match_s cn38xx;
+	struct cvmx_iob_inb_data_match_s cn38xxp2;
+	struct cvmx_iob_inb_data_match_s cn50xx;
+	struct cvmx_iob_inb_data_match_s cn52xx;
+	struct cvmx_iob_inb_data_match_s cn52xxp1;
+	struct cvmx_iob_inb_data_match_s cn56xx;
+	struct cvmx_iob_inb_data_match_s cn56xxp1;
+	struct cvmx_iob_inb_data_match_s cn58xx;
+	struct cvmx_iob_inb_data_match_s cn58xxp1;
+};
+
+union cvmx_iob_inb_data_match_enb {
+	uint64_t u64;
+	struct cvmx_iob_inb_data_match_enb_s {
+		uint64_t data:64;
+	} s;
+	struct cvmx_iob_inb_data_match_enb_s cn30xx;
+	struct cvmx_iob_inb_data_match_enb_s cn31xx;
+	struct cvmx_iob_inb_data_match_enb_s cn38xx;
+	struct cvmx_iob_inb_data_match_enb_s cn38xxp2;
+	struct cvmx_iob_inb_data_match_enb_s cn50xx;
+	struct cvmx_iob_inb_data_match_enb_s cn52xx;
+	struct cvmx_iob_inb_data_match_enb_s cn52xxp1;
+	struct cvmx_iob_inb_data_match_enb_s cn56xx;
+	struct cvmx_iob_inb_data_match_enb_s cn56xxp1;
+	struct cvmx_iob_inb_data_match_enb_s cn58xx;
+	struct cvmx_iob_inb_data_match_enb_s cn58xxp1;
+};
+
+union cvmx_iob_int_enb {
+	uint64_t u64;
+	struct cvmx_iob_int_enb_s {
+		uint64_t reserved_6_63:58;
+		uint64_t p_dat:1;
+		uint64_t np_dat:1;
+		uint64_t p_eop:1;
+		uint64_t p_sop:1;
+		uint64_t np_eop:1;
+		uint64_t np_sop:1;
+	} s;
+	struct cvmx_iob_int_enb_cn30xx {
+		uint64_t reserved_4_63:60;
+		uint64_t p_eop:1;
+		uint64_t p_sop:1;
+		uint64_t np_eop:1;
+		uint64_t np_sop:1;
+	} cn30xx;
+	struct cvmx_iob_int_enb_cn30xx cn31xx;
+	struct cvmx_iob_int_enb_cn30xx cn38xx;
+	struct cvmx_iob_int_enb_cn30xx cn38xxp2;
+	struct cvmx_iob_int_enb_s cn50xx;
+	struct cvmx_iob_int_enb_s cn52xx;
+	struct cvmx_iob_int_enb_s cn52xxp1;
+	struct cvmx_iob_int_enb_s cn56xx;
+	struct cvmx_iob_int_enb_s cn56xxp1;
+	struct cvmx_iob_int_enb_s cn58xx;
+	struct cvmx_iob_int_enb_s cn58xxp1;
+};
+
+union cvmx_iob_int_sum {
+	uint64_t u64;
+	struct cvmx_iob_int_sum_s {
+		uint64_t reserved_6_63:58;
+		uint64_t p_dat:1;
+		uint64_t np_dat:1;
+		uint64_t p_eop:1;
+		uint64_t p_sop:1;
+		uint64_t np_eop:1;
+		uint64_t np_sop:1;
+	} s;
+	struct cvmx_iob_int_sum_cn30xx {
+		uint64_t reserved_4_63:60;
+		uint64_t p_eop:1;
+		uint64_t p_sop:1;
+		uint64_t np_eop:1;
+		uint64_t np_sop:1;
+	} cn30xx;
+	struct cvmx_iob_int_sum_cn30xx cn31xx;
+	struct cvmx_iob_int_sum_cn30xx cn38xx;
+	struct cvmx_iob_int_sum_cn30xx cn38xxp2;
+	struct cvmx_iob_int_sum_s cn50xx;
+	struct cvmx_iob_int_sum_s cn52xx;
+	struct cvmx_iob_int_sum_s cn52xxp1;
+	struct cvmx_iob_int_sum_s cn56xx;
+	struct cvmx_iob_int_sum_s cn56xxp1;
+	struct cvmx_iob_int_sum_s cn58xx;
+	struct cvmx_iob_int_sum_s cn58xxp1;
+};
+
+union cvmx_iob_n2c_l2c_pri_cnt {
+	uint64_t u64;
+	struct cvmx_iob_n2c_l2c_pri_cnt_s {
+		uint64_t reserved_16_63:48;
+		uint64_t cnt_enb:1;
+		uint64_t cnt_val:15;
+	} s;
+	struct cvmx_iob_n2c_l2c_pri_cnt_s cn38xx;
+	struct cvmx_iob_n2c_l2c_pri_cnt_s cn38xxp2;
+	struct cvmx_iob_n2c_l2c_pri_cnt_s cn52xx;
+	struct cvmx_iob_n2c_l2c_pri_cnt_s cn52xxp1;
+	struct cvmx_iob_n2c_l2c_pri_cnt_s cn56xx;
+	struct cvmx_iob_n2c_l2c_pri_cnt_s cn56xxp1;
+	struct cvmx_iob_n2c_l2c_pri_cnt_s cn58xx;
+	struct cvmx_iob_n2c_l2c_pri_cnt_s cn58xxp1;
+};
+
+union cvmx_iob_n2c_rsp_pri_cnt {
+	uint64_t u64;
+	struct cvmx_iob_n2c_rsp_pri_cnt_s {
+		uint64_t reserved_16_63:48;
+		uint64_t cnt_enb:1;
+		uint64_t cnt_val:15;
+	} s;
+	struct cvmx_iob_n2c_rsp_pri_cnt_s cn38xx;
+	struct cvmx_iob_n2c_rsp_pri_cnt_s cn38xxp2;
+	struct cvmx_iob_n2c_rsp_pri_cnt_s cn52xx;
+	struct cvmx_iob_n2c_rsp_pri_cnt_s cn52xxp1;
+	struct cvmx_iob_n2c_rsp_pri_cnt_s cn56xx;
+	struct cvmx_iob_n2c_rsp_pri_cnt_s cn56xxp1;
+	struct cvmx_iob_n2c_rsp_pri_cnt_s cn58xx;
+	struct cvmx_iob_n2c_rsp_pri_cnt_s cn58xxp1;
+};
+
+union cvmx_iob_outb_com_pri_cnt {
+	uint64_t u64;
+	struct cvmx_iob_outb_com_pri_cnt_s {
+		uint64_t reserved_16_63:48;
+		uint64_t cnt_enb:1;
+		uint64_t cnt_val:15;
+	} s;
+	struct cvmx_iob_outb_com_pri_cnt_s cn38xx;
+	struct cvmx_iob_outb_com_pri_cnt_s cn38xxp2;
+	struct cvmx_iob_outb_com_pri_cnt_s cn52xx;
+	struct cvmx_iob_outb_com_pri_cnt_s cn52xxp1;
+	struct cvmx_iob_outb_com_pri_cnt_s cn56xx;
+	struct cvmx_iob_outb_com_pri_cnt_s cn56xxp1;
+	struct cvmx_iob_outb_com_pri_cnt_s cn58xx;
+	struct cvmx_iob_outb_com_pri_cnt_s cn58xxp1;
+};
+
+union cvmx_iob_outb_control_match {
+	uint64_t u64;
+	struct cvmx_iob_outb_control_match_s {
+		uint64_t reserved_26_63:38;
+		uint64_t mask:8;
+		uint64_t eot:1;
+		uint64_t dst:8;
+		uint64_t src:9;
+	} s;
+	struct cvmx_iob_outb_control_match_s cn30xx;
+	struct cvmx_iob_outb_control_match_s cn31xx;
+	struct cvmx_iob_outb_control_match_s cn38xx;
+	struct cvmx_iob_outb_control_match_s cn38xxp2;
+	struct cvmx_iob_outb_control_match_s cn50xx;
+	struct cvmx_iob_outb_control_match_s cn52xx;
+	struct cvmx_iob_outb_control_match_s cn52xxp1;
+	struct cvmx_iob_outb_control_match_s cn56xx;
+	struct cvmx_iob_outb_control_match_s cn56xxp1;
+	struct cvmx_iob_outb_control_match_s cn58xx;
+	struct cvmx_iob_outb_control_match_s cn58xxp1;
+};
+
+union cvmx_iob_outb_control_match_enb {
+	uint64_t u64;
+	struct cvmx_iob_outb_control_match_enb_s {
+		uint64_t reserved_26_63:38;
+		uint64_t mask:8;
+		uint64_t eot:1;
+		uint64_t dst:8;
+		uint64_t src:9;
+	} s;
+	struct cvmx_iob_outb_control_match_enb_s cn30xx;
+	struct cvmx_iob_outb_control_match_enb_s cn31xx;
+	struct cvmx_iob_outb_control_match_enb_s cn38xx;
+	struct cvmx_iob_outb_control_match_enb_s cn38xxp2;
+	struct cvmx_iob_outb_control_match_enb_s cn50xx;
+	struct cvmx_iob_outb_control_match_enb_s cn52xx;
+	struct cvmx_iob_outb_control_match_enb_s cn52xxp1;
+	struct cvmx_iob_outb_control_match_enb_s cn56xx;
+	struct cvmx_iob_outb_control_match_enb_s cn56xxp1;
+	struct cvmx_iob_outb_control_match_enb_s cn58xx;
+	struct cvmx_iob_outb_control_match_enb_s cn58xxp1;
+};
+
+union cvmx_iob_outb_data_match {
+	uint64_t u64;
+	struct cvmx_iob_outb_data_match_s {
+		uint64_t data:64;
+	} s;
+	struct cvmx_iob_outb_data_match_s cn30xx;
+	struct cvmx_iob_outb_data_match_s cn31xx;
+	struct cvmx_iob_outb_data_match_s cn38xx;
+	struct cvmx_iob_outb_data_match_s cn38xxp2;
+	struct cvmx_iob_outb_data_match_s cn50xx;
+	struct cvmx_iob_outb_data_match_s cn52xx;
+	struct cvmx_iob_outb_data_match_s cn52xxp1;
+	struct cvmx_iob_outb_data_match_s cn56xx;
+	struct cvmx_iob_outb_data_match_s cn56xxp1;
+	struct cvmx_iob_outb_data_match_s cn58xx;
+	struct cvmx_iob_outb_data_match_s cn58xxp1;
+};
+
+union cvmx_iob_outb_data_match_enb {
+	uint64_t u64;
+	struct cvmx_iob_outb_data_match_enb_s {
+		uint64_t data:64;
+	} s;
+	struct cvmx_iob_outb_data_match_enb_s cn30xx;
+	struct cvmx_iob_outb_data_match_enb_s cn31xx;
+	struct cvmx_iob_outb_data_match_enb_s cn38xx;
+	struct cvmx_iob_outb_data_match_enb_s cn38xxp2;
+	struct cvmx_iob_outb_data_match_enb_s cn50xx;
+	struct cvmx_iob_outb_data_match_enb_s cn52xx;
+	struct cvmx_iob_outb_data_match_enb_s cn52xxp1;
+	struct cvmx_iob_outb_data_match_enb_s cn56xx;
+	struct cvmx_iob_outb_data_match_enb_s cn56xxp1;
+	struct cvmx_iob_outb_data_match_enb_s cn58xx;
+	struct cvmx_iob_outb_data_match_enb_s cn58xxp1;
+};
+
+union cvmx_iob_outb_fpa_pri_cnt {
+	uint64_t u64;
+	struct cvmx_iob_outb_fpa_pri_cnt_s {
+		uint64_t reserved_16_63:48;
+		uint64_t cnt_enb:1;
+		uint64_t cnt_val:15;
+	} s;
+	struct cvmx_iob_outb_fpa_pri_cnt_s cn38xx;
+	struct cvmx_iob_outb_fpa_pri_cnt_s cn38xxp2;
+	struct cvmx_iob_outb_fpa_pri_cnt_s cn52xx;
+	struct cvmx_iob_outb_fpa_pri_cnt_s cn52xxp1;
+	struct cvmx_iob_outb_fpa_pri_cnt_s cn56xx;
+	struct cvmx_iob_outb_fpa_pri_cnt_s cn56xxp1;
+	struct cvmx_iob_outb_fpa_pri_cnt_s cn58xx;
+	struct cvmx_iob_outb_fpa_pri_cnt_s cn58xxp1;
+};
+
+union cvmx_iob_outb_req_pri_cnt {
+	uint64_t u64;
+	struct cvmx_iob_outb_req_pri_cnt_s {
+		uint64_t reserved_16_63:48;
+		uint64_t cnt_enb:1;
+		uint64_t cnt_val:15;
+	} s;
+	struct cvmx_iob_outb_req_pri_cnt_s cn38xx;
+	struct cvmx_iob_outb_req_pri_cnt_s cn38xxp2;
+	struct cvmx_iob_outb_req_pri_cnt_s cn52xx;
+	struct cvmx_iob_outb_req_pri_cnt_s cn52xxp1;
+	struct cvmx_iob_outb_req_pri_cnt_s cn56xx;
+	struct cvmx_iob_outb_req_pri_cnt_s cn56xxp1;
+	struct cvmx_iob_outb_req_pri_cnt_s cn58xx;
+	struct cvmx_iob_outb_req_pri_cnt_s cn58xxp1;
+};
+
+union cvmx_iob_p2c_req_pri_cnt {
+	uint64_t u64;
+	struct cvmx_iob_p2c_req_pri_cnt_s {
+		uint64_t reserved_16_63:48;
+		uint64_t cnt_enb:1;
+		uint64_t cnt_val:15;
+	} s;
+	struct cvmx_iob_p2c_req_pri_cnt_s cn38xx;
+	struct cvmx_iob_p2c_req_pri_cnt_s cn38xxp2;
+	struct cvmx_iob_p2c_req_pri_cnt_s cn52xx;
+	struct cvmx_iob_p2c_req_pri_cnt_s cn52xxp1;
+	struct cvmx_iob_p2c_req_pri_cnt_s cn56xx;
+	struct cvmx_iob_p2c_req_pri_cnt_s cn56xxp1;
+	struct cvmx_iob_p2c_req_pri_cnt_s cn58xx;
+	struct cvmx_iob_p2c_req_pri_cnt_s cn58xxp1;
+};
+
+union cvmx_iob_pkt_err {
+	uint64_t u64;
+	struct cvmx_iob_pkt_err_s {
+		uint64_t reserved_6_63:58;
+		uint64_t port:6;
+	} s;
+	struct cvmx_iob_pkt_err_s cn30xx;
+	struct cvmx_iob_pkt_err_s cn31xx;
+	struct cvmx_iob_pkt_err_s cn38xx;
+	struct cvmx_iob_pkt_err_s cn38xxp2;
+	struct cvmx_iob_pkt_err_s cn50xx;
+	struct cvmx_iob_pkt_err_s cn52xx;
+	struct cvmx_iob_pkt_err_s cn52xxp1;
+	struct cvmx_iob_pkt_err_s cn56xx;
+	struct cvmx_iob_pkt_err_s cn56xxp1;
+	struct cvmx_iob_pkt_err_s cn58xx;
+	struct cvmx_iob_pkt_err_s cn58xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-ipd-defs.h b/arch/mips/include/asm/octeon/cvmx-ipd-defs.h
new file mode 100644
index 00000000000..f8b8fc657d2
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-ipd-defs.h
@@ -0,0 +1,877 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_IPD_DEFS_H__
+#define __CVMX_IPD_DEFS_H__
+
+#define CVMX_IPD_1ST_MBUFF_SKIP \
+	 CVMX_ADD_IO_SEG(0x00014F0000000000ull)
+#define CVMX_IPD_1st_NEXT_PTR_BACK \
+	 CVMX_ADD_IO_SEG(0x00014F0000000150ull)
+#define CVMX_IPD_2nd_NEXT_PTR_BACK \
+	 CVMX_ADD_IO_SEG(0x00014F0000000158ull)
+#define CVMX_IPD_BIST_STATUS \
+	 CVMX_ADD_IO_SEG(0x00014F00000007F8ull)
+#define CVMX_IPD_BP_PRT_RED_END \
+	 CVMX_ADD_IO_SEG(0x00014F0000000328ull)
+#define CVMX_IPD_CLK_COUNT \
+	 CVMX_ADD_IO_SEG(0x00014F0000000338ull)
+#define CVMX_IPD_CTL_STATUS \
+	 CVMX_ADD_IO_SEG(0x00014F0000000018ull)
+#define CVMX_IPD_INT_ENB \
+	 CVMX_ADD_IO_SEG(0x00014F0000000160ull)
+#define CVMX_IPD_INT_SUM \
+	 CVMX_ADD_IO_SEG(0x00014F0000000168ull)
+#define CVMX_IPD_NOT_1ST_MBUFF_SKIP \
+	 CVMX_ADD_IO_SEG(0x00014F0000000008ull)
+#define CVMX_IPD_PACKET_MBUFF_SIZE \
+	 CVMX_ADD_IO_SEG(0x00014F0000000010ull)
+#define CVMX_IPD_PKT_PTR_VALID \
+	 CVMX_ADD_IO_SEG(0x00014F0000000358ull)
+#define CVMX_IPD_PORTX_BP_PAGE_CNT(offset) \
+	 CVMX_ADD_IO_SEG(0x00014F0000000028ull + (((offset) & 63) * 8))
+#define CVMX_IPD_PORTX_BP_PAGE_CNT2(offset) \
+	 CVMX_ADD_IO_SEG(0x00014F0000000368ull + (((offset) & 63) * 8) - 8 * 36)
+#define CVMX_IPD_PORT_BP_COUNTERS2_PAIRX(offset) \
+	 CVMX_ADD_IO_SEG(0x00014F0000000388ull + (((offset) & 63) * 8) - 8 * 36)
+#define CVMX_IPD_PORT_BP_COUNTERS_PAIRX(offset) \
+	 CVMX_ADD_IO_SEG(0x00014F00000001B8ull + (((offset) & 63) * 8))
+#define CVMX_IPD_PORT_QOS_INTX(offset) \
+	 CVMX_ADD_IO_SEG(0x00014F0000000808ull + (((offset) & 7) * 8))
+#define CVMX_IPD_PORT_QOS_INT_ENBX(offset) \
+	 CVMX_ADD_IO_SEG(0x00014F0000000848ull + (((offset) & 7) * 8))
+#define CVMX_IPD_PORT_QOS_X_CNT(offset) \
+	 CVMX_ADD_IO_SEG(0x00014F0000000888ull + (((offset) & 511) * 8))
+#define CVMX_IPD_PRC_HOLD_PTR_FIFO_CTL \
+	 CVMX_ADD_IO_SEG(0x00014F0000000348ull)
+#define CVMX_IPD_PRC_PORT_PTR_FIFO_CTL \
+	 CVMX_ADD_IO_SEG(0x00014F0000000350ull)
+#define CVMX_IPD_PTR_COUNT \
+	 CVMX_ADD_IO_SEG(0x00014F0000000320ull)
+#define CVMX_IPD_PWP_PTR_FIFO_CTL \
+	 CVMX_ADD_IO_SEG(0x00014F0000000340ull)
+#define CVMX_IPD_QOS0_RED_MARKS \
+	 CVMX_ADD_IO_SEG(0x00014F0000000178ull)
+#define CVMX_IPD_QOS1_RED_MARKS \
+	 CVMX_ADD_IO_SEG(0x00014F0000000180ull)
+#define CVMX_IPD_QOS2_RED_MARKS \
+	 CVMX_ADD_IO_SEG(0x00014F0000000188ull)
+#define CVMX_IPD_QOS3_RED_MARKS \
+	 CVMX_ADD_IO_SEG(0x00014F0000000190ull)
+#define CVMX_IPD_QOS4_RED_MARKS \
+	 CVMX_ADD_IO_SEG(0x00014F0000000198ull)
+#define CVMX_IPD_QOS5_RED_MARKS \
+	 CVMX_ADD_IO_SEG(0x00014F00000001A0ull)
+#define CVMX_IPD_QOS6_RED_MARKS \
+	 CVMX_ADD_IO_SEG(0x00014F00000001A8ull)
+#define CVMX_IPD_QOS7_RED_MARKS \
+	 CVMX_ADD_IO_SEG(0x00014F00000001B0ull)
+#define CVMX_IPD_QOSX_RED_MARKS(offset) \
+	 CVMX_ADD_IO_SEG(0x00014F0000000178ull + (((offset) & 7) * 8))
+#define CVMX_IPD_QUE0_FREE_PAGE_CNT \
+	 CVMX_ADD_IO_SEG(0x00014F0000000330ull)
+#define CVMX_IPD_RED_PORT_ENABLE \
+	 CVMX_ADD_IO_SEG(0x00014F00000002D8ull)
+#define CVMX_IPD_RED_PORT_ENABLE2 \
+	 CVMX_ADD_IO_SEG(0x00014F00000003A8ull)
+#define CVMX_IPD_RED_QUE0_PARAM \
+	 CVMX_ADD_IO_SEG(0x00014F00000002E0ull)
+#define CVMX_IPD_RED_QUE1_PARAM \
+	 CVMX_ADD_IO_SEG(0x00014F00000002E8ull)
+#define CVMX_IPD_RED_QUE2_PARAM \
+	 CVMX_ADD_IO_SEG(0x00014F00000002F0ull)
+#define CVMX_IPD_RED_QUE3_PARAM \
+	 CVMX_ADD_IO_SEG(0x00014F00000002F8ull)
+#define CVMX_IPD_RED_QUE4_PARAM \
+	 CVMX_ADD_IO_SEG(0x00014F0000000300ull)
+#define CVMX_IPD_RED_QUE5_PARAM \
+	 CVMX_ADD_IO_SEG(0x00014F0000000308ull)
+#define CVMX_IPD_RED_QUE6_PARAM \
+	 CVMX_ADD_IO_SEG(0x00014F0000000310ull)
+#define CVMX_IPD_RED_QUE7_PARAM \
+	 CVMX_ADD_IO_SEG(0x00014F0000000318ull)
+#define CVMX_IPD_RED_QUEX_PARAM(offset) \
+	 CVMX_ADD_IO_SEG(0x00014F00000002E0ull + (((offset) & 7) * 8))
+#define CVMX_IPD_SUB_PORT_BP_PAGE_CNT \
+	 CVMX_ADD_IO_SEG(0x00014F0000000148ull)
+#define CVMX_IPD_SUB_PORT_FCS \
+	 CVMX_ADD_IO_SEG(0x00014F0000000170ull)
+#define CVMX_IPD_SUB_PORT_QOS_CNT \
+	 CVMX_ADD_IO_SEG(0x00014F0000000800ull)
+#define CVMX_IPD_WQE_FPA_QUEUE \
+	 CVMX_ADD_IO_SEG(0x00014F0000000020ull)
+#define CVMX_IPD_WQE_PTR_VALID \
+	 CVMX_ADD_IO_SEG(0x00014F0000000360ull)
+
+union cvmx_ipd_1st_mbuff_skip {
+	uint64_t u64;
+	struct cvmx_ipd_1st_mbuff_skip_s {
+		uint64_t reserved_6_63:58;
+		uint64_t skip_sz:6;
+	} s;
+	struct cvmx_ipd_1st_mbuff_skip_s cn30xx;
+	struct cvmx_ipd_1st_mbuff_skip_s cn31xx;
+	struct cvmx_ipd_1st_mbuff_skip_s cn38xx;
+	struct cvmx_ipd_1st_mbuff_skip_s cn38xxp2;
+	struct cvmx_ipd_1st_mbuff_skip_s cn50xx;
+	struct cvmx_ipd_1st_mbuff_skip_s cn52xx;
+	struct cvmx_ipd_1st_mbuff_skip_s cn52xxp1;
+	struct cvmx_ipd_1st_mbuff_skip_s cn56xx;
+	struct cvmx_ipd_1st_mbuff_skip_s cn56xxp1;
+	struct cvmx_ipd_1st_mbuff_skip_s cn58xx;
+	struct cvmx_ipd_1st_mbuff_skip_s cn58xxp1;
+};
+
+union cvmx_ipd_1st_next_ptr_back {
+	uint64_t u64;
+	struct cvmx_ipd_1st_next_ptr_back_s {
+		uint64_t reserved_4_63:60;
+		uint64_t back:4;
+	} s;
+	struct cvmx_ipd_1st_next_ptr_back_s cn30xx;
+	struct cvmx_ipd_1st_next_ptr_back_s cn31xx;
+	struct cvmx_ipd_1st_next_ptr_back_s cn38xx;
+	struct cvmx_ipd_1st_next_ptr_back_s cn38xxp2;
+	struct cvmx_ipd_1st_next_ptr_back_s cn50xx;
+	struct cvmx_ipd_1st_next_ptr_back_s cn52xx;
+	struct cvmx_ipd_1st_next_ptr_back_s cn52xxp1;
+	struct cvmx_ipd_1st_next_ptr_back_s cn56xx;
+	struct cvmx_ipd_1st_next_ptr_back_s cn56xxp1;
+	struct cvmx_ipd_1st_next_ptr_back_s cn58xx;
+	struct cvmx_ipd_1st_next_ptr_back_s cn58xxp1;
+};
+
+union cvmx_ipd_2nd_next_ptr_back {
+	uint64_t u64;
+	struct cvmx_ipd_2nd_next_ptr_back_s {
+		uint64_t reserved_4_63:60;
+		uint64_t back:4;
+	} s;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn30xx;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn31xx;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn38xx;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn38xxp2;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn50xx;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn52xx;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn52xxp1;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn56xx;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn56xxp1;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn58xx;
+	struct cvmx_ipd_2nd_next_ptr_back_s cn58xxp1;
+};
+
+union cvmx_ipd_bist_status {
+	uint64_t u64;
+	struct cvmx_ipd_bist_status_s {
+		uint64_t reserved_18_63:46;
+		uint64_t csr_mem:1;
+		uint64_t csr_ncmd:1;
+		uint64_t pwq_wqed:1;
+		uint64_t pwq_wp1:1;
+		uint64_t pwq_pow:1;
+		uint64_t ipq_pbe1:1;
+		uint64_t ipq_pbe0:1;
+		uint64_t pbm3:1;
+		uint64_t pbm2:1;
+		uint64_t pbm1:1;
+		uint64_t pbm0:1;
+		uint64_t pbm_word:1;
+		uint64_t pwq1:1;
+		uint64_t pwq0:1;
+		uint64_t prc_off:1;
+		uint64_t ipd_old:1;
+		uint64_t ipd_new:1;
+		uint64_t pwp:1;
+	} s;
+	struct cvmx_ipd_bist_status_cn30xx {
+		uint64_t reserved_16_63:48;
+		uint64_t pwq_wqed:1;
+		uint64_t pwq_wp1:1;
+		uint64_t pwq_pow:1;
+		uint64_t ipq_pbe1:1;
+		uint64_t ipq_pbe0:1;
+		uint64_t pbm3:1;
+		uint64_t pbm2:1;
+		uint64_t pbm1:1;
+		uint64_t pbm0:1;
+		uint64_t pbm_word:1;
+		uint64_t pwq1:1;
+		uint64_t pwq0:1;
+		uint64_t prc_off:1;
+		uint64_t ipd_old:1;
+		uint64_t ipd_new:1;
+		uint64_t pwp:1;
+	} cn30xx;
+	struct cvmx_ipd_bist_status_cn30xx cn31xx;
+	struct cvmx_ipd_bist_status_cn30xx cn38xx;
+	struct cvmx_ipd_bist_status_cn30xx cn38xxp2;
+	struct cvmx_ipd_bist_status_cn30xx cn50xx;
+	struct cvmx_ipd_bist_status_s cn52xx;
+	struct cvmx_ipd_bist_status_s cn52xxp1;
+	struct cvmx_ipd_bist_status_s cn56xx;
+	struct cvmx_ipd_bist_status_s cn56xxp1;
+	struct cvmx_ipd_bist_status_cn30xx cn58xx;
+	struct cvmx_ipd_bist_status_cn30xx cn58xxp1;
+};
+
+union cvmx_ipd_bp_prt_red_end {
+	uint64_t u64;
+	struct cvmx_ipd_bp_prt_red_end_s {
+		uint64_t reserved_40_63:24;
+		uint64_t prt_enb:40;
+	} s;
+	struct cvmx_ipd_bp_prt_red_end_cn30xx {
+		uint64_t reserved_36_63:28;
+		uint64_t prt_enb:36;
+	} cn30xx;
+	struct cvmx_ipd_bp_prt_red_end_cn30xx cn31xx;
+	struct cvmx_ipd_bp_prt_red_end_cn30xx cn38xx;
+	struct cvmx_ipd_bp_prt_red_end_cn30xx cn38xxp2;
+	struct cvmx_ipd_bp_prt_red_end_cn30xx cn50xx;
+	struct cvmx_ipd_bp_prt_red_end_s cn52xx;
+	struct cvmx_ipd_bp_prt_red_end_s cn52xxp1;
+	struct cvmx_ipd_bp_prt_red_end_s cn56xx;
+	struct cvmx_ipd_bp_prt_red_end_s cn56xxp1;
+	struct cvmx_ipd_bp_prt_red_end_cn30xx cn58xx;
+	struct cvmx_ipd_bp_prt_red_end_cn30xx cn58xxp1;
+};
+
+union cvmx_ipd_clk_count {
+	uint64_t u64;
+	struct cvmx_ipd_clk_count_s {
+		uint64_t clk_cnt:64;
+	} s;
+	struct cvmx_ipd_clk_count_s cn30xx;
+	struct cvmx_ipd_clk_count_s cn31xx;
+	struct cvmx_ipd_clk_count_s cn38xx;
+	struct cvmx_ipd_clk_count_s cn38xxp2;
+	struct cvmx_ipd_clk_count_s cn50xx;
+	struct cvmx_ipd_clk_count_s cn52xx;
+	struct cvmx_ipd_clk_count_s cn52xxp1;
+	struct cvmx_ipd_clk_count_s cn56xx;
+	struct cvmx_ipd_clk_count_s cn56xxp1;
+	struct cvmx_ipd_clk_count_s cn58xx;
+	struct cvmx_ipd_clk_count_s cn58xxp1;
+};
+
+union cvmx_ipd_ctl_status {
+	uint64_t u64;
+	struct cvmx_ipd_ctl_status_s {
+		uint64_t reserved_15_63:49;
+		uint64_t no_wptr:1;
+		uint64_t pq_apkt:1;
+		uint64_t pq_nabuf:1;
+		uint64_t ipd_full:1;
+		uint64_t pkt_off:1;
+		uint64_t len_m8:1;
+		uint64_t reset:1;
+		uint64_t addpkt:1;
+		uint64_t naddbuf:1;
+		uint64_t pkt_lend:1;
+		uint64_t wqe_lend:1;
+		uint64_t pbp_en:1;
+		uint64_t opc_mode:2;
+		uint64_t ipd_en:1;
+	} s;
+	struct cvmx_ipd_ctl_status_cn30xx {
+		uint64_t reserved_10_63:54;
+		uint64_t len_m8:1;
+		uint64_t reset:1;
+		uint64_t addpkt:1;
+		uint64_t naddbuf:1;
+		uint64_t pkt_lend:1;
+		uint64_t wqe_lend:1;
+		uint64_t pbp_en:1;
+		uint64_t opc_mode:2;
+		uint64_t ipd_en:1;
+	} cn30xx;
+	struct cvmx_ipd_ctl_status_cn30xx cn31xx;
+	struct cvmx_ipd_ctl_status_cn30xx cn38xx;
+	struct cvmx_ipd_ctl_status_cn38xxp2 {
+		uint64_t reserved_9_63:55;
+		uint64_t reset:1;
+		uint64_t addpkt:1;
+		uint64_t naddbuf:1;
+		uint64_t pkt_lend:1;
+		uint64_t wqe_lend:1;
+		uint64_t pbp_en:1;
+		uint64_t opc_mode:2;
+		uint64_t ipd_en:1;
+	} cn38xxp2;
+	struct cvmx_ipd_ctl_status_s cn50xx;
+	struct cvmx_ipd_ctl_status_s cn52xx;
+	struct cvmx_ipd_ctl_status_s cn52xxp1;
+	struct cvmx_ipd_ctl_status_s cn56xx;
+	struct cvmx_ipd_ctl_status_s cn56xxp1;
+	struct cvmx_ipd_ctl_status_cn58xx {
+		uint64_t reserved_12_63:52;
+		uint64_t ipd_full:1;
+		uint64_t pkt_off:1;
+		uint64_t len_m8:1;
+		uint64_t reset:1;
+		uint64_t addpkt:1;
+		uint64_t naddbuf:1;
+		uint64_t pkt_lend:1;
+		uint64_t wqe_lend:1;
+		uint64_t pbp_en:1;
+		uint64_t opc_mode:2;
+		uint64_t ipd_en:1;
+	} cn58xx;
+	struct cvmx_ipd_ctl_status_cn58xx cn58xxp1;
+};
+
+union cvmx_ipd_int_enb {
+	uint64_t u64;
+	struct cvmx_ipd_int_enb_s {
+		uint64_t reserved_12_63:52;
+		uint64_t pq_sub:1;
+		uint64_t pq_add:1;
+		uint64_t bc_ovr:1;
+		uint64_t d_coll:1;
+		uint64_t c_coll:1;
+		uint64_t cc_ovr:1;
+		uint64_t dc_ovr:1;
+		uint64_t bp_sub:1;
+		uint64_t prc_par3:1;
+		uint64_t prc_par2:1;
+		uint64_t prc_par1:1;
+		uint64_t prc_par0:1;
+	} s;
+	struct cvmx_ipd_int_enb_cn30xx {
+		uint64_t reserved_5_63:59;
+		uint64_t bp_sub:1;
+		uint64_t prc_par3:1;
+		uint64_t prc_par2:1;
+		uint64_t prc_par1:1;
+		uint64_t prc_par0:1;
+	} cn30xx;
+	struct cvmx_ipd_int_enb_cn30xx cn31xx;
+	struct cvmx_ipd_int_enb_cn38xx {
+		uint64_t reserved_10_63:54;
+		uint64_t bc_ovr:1;
+		uint64_t d_coll:1;
+		uint64_t c_coll:1;
+		uint64_t cc_ovr:1;
+		uint64_t dc_ovr:1;
+		uint64_t bp_sub:1;
+		uint64_t prc_par3:1;
+		uint64_t prc_par2:1;
+		uint64_t prc_par1:1;
+		uint64_t prc_par0:1;
+	} cn38xx;
+	struct cvmx_ipd_int_enb_cn30xx cn38xxp2;
+	struct cvmx_ipd_int_enb_cn38xx cn50xx;
+	struct cvmx_ipd_int_enb_s cn52xx;
+	struct cvmx_ipd_int_enb_s cn52xxp1;
+	struct cvmx_ipd_int_enb_s cn56xx;
+	struct cvmx_ipd_int_enb_s cn56xxp1;
+	struct cvmx_ipd_int_enb_cn38xx cn58xx;
+	struct cvmx_ipd_int_enb_cn38xx cn58xxp1;
+};
+
+union cvmx_ipd_int_sum {
+	uint64_t u64;
+	struct cvmx_ipd_int_sum_s {
+		uint64_t reserved_12_63:52;
+		uint64_t pq_sub:1;
+		uint64_t pq_add:1;
+		uint64_t bc_ovr:1;
+		uint64_t d_coll:1;
+		uint64_t c_coll:1;
+		uint64_t cc_ovr:1;
+		uint64_t dc_ovr:1;
+		uint64_t bp_sub:1;
+		uint64_t prc_par3:1;
+		uint64_t prc_par2:1;
+		uint64_t prc_par1:1;
+		uint64_t prc_par0:1;
+	} s;
+	struct cvmx_ipd_int_sum_cn30xx {
+		uint64_t reserved_5_63:59;
+		uint64_t bp_sub:1;
+		uint64_t prc_par3:1;
+		uint64_t prc_par2:1;
+		uint64_t prc_par1:1;
+		uint64_t prc_par0:1;
+	} cn30xx;
+	struct cvmx_ipd_int_sum_cn30xx cn31xx;
+	struct cvmx_ipd_int_sum_cn38xx {
+		uint64_t reserved_10_63:54;
+		uint64_t bc_ovr:1;
+		uint64_t d_coll:1;
+		uint64_t c_coll:1;
+		uint64_t cc_ovr:1;
+		uint64_t dc_ovr:1;
+		uint64_t bp_sub:1;
+		uint64_t prc_par3:1;
+		uint64_t prc_par2:1;
+		uint64_t prc_par1:1;
+		uint64_t prc_par0:1;
+	} cn38xx;
+	struct cvmx_ipd_int_sum_cn30xx cn38xxp2;
+	struct cvmx_ipd_int_sum_cn38xx cn50xx;
+	struct cvmx_ipd_int_sum_s cn52xx;
+	struct cvmx_ipd_int_sum_s cn52xxp1;
+	struct cvmx_ipd_int_sum_s cn56xx;
+	struct cvmx_ipd_int_sum_s cn56xxp1;
+	struct cvmx_ipd_int_sum_cn38xx cn58xx;
+	struct cvmx_ipd_int_sum_cn38xx cn58xxp1;
+};
+
+union cvmx_ipd_not_1st_mbuff_skip {
+	uint64_t u64;
+	struct cvmx_ipd_not_1st_mbuff_skip_s {
+		uint64_t reserved_6_63:58;
+		uint64_t skip_sz:6;
+	} s;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn30xx;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn31xx;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn38xx;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn38xxp2;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn50xx;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn52xx;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn52xxp1;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn56xx;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn56xxp1;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn58xx;
+	struct cvmx_ipd_not_1st_mbuff_skip_s cn58xxp1;
+};
+
+union cvmx_ipd_packet_mbuff_size {
+	uint64_t u64;
+	struct cvmx_ipd_packet_mbuff_size_s {
+		uint64_t reserved_12_63:52;
+		uint64_t mb_size:12;
+	} s;
+	struct cvmx_ipd_packet_mbuff_size_s cn30xx;
+	struct cvmx_ipd_packet_mbuff_size_s cn31xx;
+	struct cvmx_ipd_packet_mbuff_size_s cn38xx;
+	struct cvmx_ipd_packet_mbuff_size_s cn38xxp2;
+	struct cvmx_ipd_packet_mbuff_size_s cn50xx;
+	struct cvmx_ipd_packet_mbuff_size_s cn52xx;
+	struct cvmx_ipd_packet_mbuff_size_s cn52xxp1;
+	struct cvmx_ipd_packet_mbuff_size_s cn56xx;
+	struct cvmx_ipd_packet_mbuff_size_s cn56xxp1;
+	struct cvmx_ipd_packet_mbuff_size_s cn58xx;
+	struct cvmx_ipd_packet_mbuff_size_s cn58xxp1;
+};
+
+union cvmx_ipd_pkt_ptr_valid {
+	uint64_t u64;
+	struct cvmx_ipd_pkt_ptr_valid_s {
+		uint64_t reserved_29_63:35;
+		uint64_t ptr:29;
+	} s;
+	struct cvmx_ipd_pkt_ptr_valid_s cn30xx;
+	struct cvmx_ipd_pkt_ptr_valid_s cn31xx;
+	struct cvmx_ipd_pkt_ptr_valid_s cn38xx;
+	struct cvmx_ipd_pkt_ptr_valid_s cn50xx;
+	struct cvmx_ipd_pkt_ptr_valid_s cn52xx;
+	struct cvmx_ipd_pkt_ptr_valid_s cn52xxp1;
+	struct cvmx_ipd_pkt_ptr_valid_s cn56xx;
+	struct cvmx_ipd_pkt_ptr_valid_s cn56xxp1;
+	struct cvmx_ipd_pkt_ptr_valid_s cn58xx;
+	struct cvmx_ipd_pkt_ptr_valid_s cn58xxp1;
+};
+
+union cvmx_ipd_portx_bp_page_cnt {
+	uint64_t u64;
+	struct cvmx_ipd_portx_bp_page_cnt_s {
+		uint64_t reserved_18_63:46;
+		uint64_t bp_enb:1;
+		uint64_t page_cnt:17;
+	} s;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn30xx;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn31xx;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn38xx;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn38xxp2;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn50xx;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn52xx;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn52xxp1;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn56xx;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn56xxp1;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn58xx;
+	struct cvmx_ipd_portx_bp_page_cnt_s cn58xxp1;
+};
+
+union cvmx_ipd_portx_bp_page_cnt2 {
+	uint64_t u64;
+	struct cvmx_ipd_portx_bp_page_cnt2_s {
+		uint64_t reserved_18_63:46;
+		uint64_t bp_enb:1;
+		uint64_t page_cnt:17;
+	} s;
+	struct cvmx_ipd_portx_bp_page_cnt2_s cn52xx;
+	struct cvmx_ipd_portx_bp_page_cnt2_s cn52xxp1;
+	struct cvmx_ipd_portx_bp_page_cnt2_s cn56xx;
+	struct cvmx_ipd_portx_bp_page_cnt2_s cn56xxp1;
+};
+
+union cvmx_ipd_port_bp_counters2_pairx {
+	uint64_t u64;
+	struct cvmx_ipd_port_bp_counters2_pairx_s {
+		uint64_t reserved_25_63:39;
+		uint64_t cnt_val:25;
+	} s;
+	struct cvmx_ipd_port_bp_counters2_pairx_s cn52xx;
+	struct cvmx_ipd_port_bp_counters2_pairx_s cn52xxp1;
+	struct cvmx_ipd_port_bp_counters2_pairx_s cn56xx;
+	struct cvmx_ipd_port_bp_counters2_pairx_s cn56xxp1;
+};
+
+union cvmx_ipd_port_bp_counters_pairx {
+	uint64_t u64;
+	struct cvmx_ipd_port_bp_counters_pairx_s {
+		uint64_t reserved_25_63:39;
+		uint64_t cnt_val:25;
+	} s;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn30xx;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn31xx;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn38xx;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn38xxp2;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn50xx;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn52xx;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn52xxp1;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn56xx;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn56xxp1;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn58xx;
+	struct cvmx_ipd_port_bp_counters_pairx_s cn58xxp1;
+};
+
+union cvmx_ipd_port_qos_x_cnt {
+	uint64_t u64;
+	struct cvmx_ipd_port_qos_x_cnt_s {
+		uint64_t wmark:32;
+		uint64_t cnt:32;
+	} s;
+	struct cvmx_ipd_port_qos_x_cnt_s cn52xx;
+	struct cvmx_ipd_port_qos_x_cnt_s cn52xxp1;
+	struct cvmx_ipd_port_qos_x_cnt_s cn56xx;
+	struct cvmx_ipd_port_qos_x_cnt_s cn56xxp1;
+};
+
+union cvmx_ipd_port_qos_intx {
+	uint64_t u64;
+	struct cvmx_ipd_port_qos_intx_s {
+		uint64_t intr:64;
+	} s;
+	struct cvmx_ipd_port_qos_intx_s cn52xx;
+	struct cvmx_ipd_port_qos_intx_s cn52xxp1;
+	struct cvmx_ipd_port_qos_intx_s cn56xx;
+	struct cvmx_ipd_port_qos_intx_s cn56xxp1;
+};
+
+union cvmx_ipd_port_qos_int_enbx {
+	uint64_t u64;
+	struct cvmx_ipd_port_qos_int_enbx_s {
+		uint64_t enb:64;
+	} s;
+	struct cvmx_ipd_port_qos_int_enbx_s cn52xx;
+	struct cvmx_ipd_port_qos_int_enbx_s cn52xxp1;
+	struct cvmx_ipd_port_qos_int_enbx_s cn56xx;
+	struct cvmx_ipd_port_qos_int_enbx_s cn56xxp1;
+};
+
+union cvmx_ipd_prc_hold_ptr_fifo_ctl {
+	uint64_t u64;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s {
+		uint64_t reserved_39_63:25;
+		uint64_t max_pkt:3;
+		uint64_t praddr:3;
+		uint64_t ptr:29;
+		uint64_t cena:1;
+		uint64_t raddr:3;
+	} s;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s cn30xx;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s cn31xx;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s cn38xx;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s cn50xx;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s cn52xx;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s cn52xxp1;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s cn56xx;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s cn56xxp1;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s cn58xx;
+	struct cvmx_ipd_prc_hold_ptr_fifo_ctl_s cn58xxp1;
+};
+
+union cvmx_ipd_prc_port_ptr_fifo_ctl {
+	uint64_t u64;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s {
+		uint64_t reserved_44_63:20;
+		uint64_t max_pkt:7;
+		uint64_t ptr:29;
+		uint64_t cena:1;
+		uint64_t raddr:7;
+	} s;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s cn30xx;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s cn31xx;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s cn38xx;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s cn50xx;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s cn52xx;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s cn52xxp1;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s cn56xx;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s cn56xxp1;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s cn58xx;
+	struct cvmx_ipd_prc_port_ptr_fifo_ctl_s cn58xxp1;
+};
+
+union cvmx_ipd_ptr_count {
+	uint64_t u64;
+	struct cvmx_ipd_ptr_count_s {
+		uint64_t reserved_19_63:45;
+		uint64_t pktv_cnt:1;
+		uint64_t wqev_cnt:1;
+		uint64_t pfif_cnt:3;
+		uint64_t pkt_pcnt:7;
+		uint64_t wqe_pcnt:7;
+	} s;
+	struct cvmx_ipd_ptr_count_s cn30xx;
+	struct cvmx_ipd_ptr_count_s cn31xx;
+	struct cvmx_ipd_ptr_count_s cn38xx;
+	struct cvmx_ipd_ptr_count_s cn38xxp2;
+	struct cvmx_ipd_ptr_count_s cn50xx;
+	struct cvmx_ipd_ptr_count_s cn52xx;
+	struct cvmx_ipd_ptr_count_s cn52xxp1;
+	struct cvmx_ipd_ptr_count_s cn56xx;
+	struct cvmx_ipd_ptr_count_s cn56xxp1;
+	struct cvmx_ipd_ptr_count_s cn58xx;
+	struct cvmx_ipd_ptr_count_s cn58xxp1;
+};
+
+union cvmx_ipd_pwp_ptr_fifo_ctl {
+	uint64_t u64;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s {
+		uint64_t reserved_61_63:3;
+		uint64_t max_cnts:7;
+		uint64_t wraddr:8;
+		uint64_t praddr:8;
+		uint64_t ptr:29;
+		uint64_t cena:1;
+		uint64_t raddr:8;
+	} s;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s cn30xx;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s cn31xx;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s cn38xx;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s cn50xx;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s cn52xx;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s cn52xxp1;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s cn56xx;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s cn56xxp1;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s cn58xx;
+	struct cvmx_ipd_pwp_ptr_fifo_ctl_s cn58xxp1;
+};
+
+union cvmx_ipd_qosx_red_marks {
+	uint64_t u64;
+	struct cvmx_ipd_qosx_red_marks_s {
+		uint64_t drop:32;
+		uint64_t pass:32;
+	} s;
+	struct cvmx_ipd_qosx_red_marks_s cn30xx;
+	struct cvmx_ipd_qosx_red_marks_s cn31xx;
+	struct cvmx_ipd_qosx_red_marks_s cn38xx;
+	struct cvmx_ipd_qosx_red_marks_s cn38xxp2;
+	struct cvmx_ipd_qosx_red_marks_s cn50xx;
+	struct cvmx_ipd_qosx_red_marks_s cn52xx;
+	struct cvmx_ipd_qosx_red_marks_s cn52xxp1;
+	struct cvmx_ipd_qosx_red_marks_s cn56xx;
+	struct cvmx_ipd_qosx_red_marks_s cn56xxp1;
+	struct cvmx_ipd_qosx_red_marks_s cn58xx;
+	struct cvmx_ipd_qosx_red_marks_s cn58xxp1;
+};
+
+union cvmx_ipd_que0_free_page_cnt {
+	uint64_t u64;
+	struct cvmx_ipd_que0_free_page_cnt_s {
+		uint64_t reserved_32_63:32;
+		uint64_t q0_pcnt:32;
+	} s;
+	struct cvmx_ipd_que0_free_page_cnt_s cn30xx;
+	struct cvmx_ipd_que0_free_page_cnt_s cn31xx;
+	struct cvmx_ipd_que0_free_page_cnt_s cn38xx;
+	struct cvmx_ipd_que0_free_page_cnt_s cn38xxp2;
+	struct cvmx_ipd_que0_free_page_cnt_s cn50xx;
+	struct cvmx_ipd_que0_free_page_cnt_s cn52xx;
+	struct cvmx_ipd_que0_free_page_cnt_s cn52xxp1;
+	struct cvmx_ipd_que0_free_page_cnt_s cn56xx;
+	struct cvmx_ipd_que0_free_page_cnt_s cn56xxp1;
+	struct cvmx_ipd_que0_free_page_cnt_s cn58xx;
+	struct cvmx_ipd_que0_free_page_cnt_s cn58xxp1;
+};
+
+union cvmx_ipd_red_port_enable {
+	uint64_t u64;
+	struct cvmx_ipd_red_port_enable_s {
+		uint64_t prb_dly:14;
+		uint64_t avg_dly:14;
+		uint64_t prt_enb:36;
+	} s;
+	struct cvmx_ipd_red_port_enable_s cn30xx;
+	struct cvmx_ipd_red_port_enable_s cn31xx;
+	struct cvmx_ipd_red_port_enable_s cn38xx;
+	struct cvmx_ipd_red_port_enable_s cn38xxp2;
+	struct cvmx_ipd_red_port_enable_s cn50xx;
+	struct cvmx_ipd_red_port_enable_s cn52xx;
+	struct cvmx_ipd_red_port_enable_s cn52xxp1;
+	struct cvmx_ipd_red_port_enable_s cn56xx;
+	struct cvmx_ipd_red_port_enable_s cn56xxp1;
+	struct cvmx_ipd_red_port_enable_s cn58xx;
+	struct cvmx_ipd_red_port_enable_s cn58xxp1;
+};
+
+union cvmx_ipd_red_port_enable2 {
+	uint64_t u64;
+	struct cvmx_ipd_red_port_enable2_s {
+		uint64_t reserved_4_63:60;
+		uint64_t prt_enb:4;
+	} s;
+	struct cvmx_ipd_red_port_enable2_s cn52xx;
+	struct cvmx_ipd_red_port_enable2_s cn52xxp1;
+	struct cvmx_ipd_red_port_enable2_s cn56xx;
+	struct cvmx_ipd_red_port_enable2_s cn56xxp1;
+};
+
+union cvmx_ipd_red_quex_param {
+	uint64_t u64;
+	struct cvmx_ipd_red_quex_param_s {
+		uint64_t reserved_49_63:15;
+		uint64_t use_pcnt:1;
+		uint64_t new_con:8;
+		uint64_t avg_con:8;
+		uint64_t prb_con:32;
+	} s;
+	struct cvmx_ipd_red_quex_param_s cn30xx;
+	struct cvmx_ipd_red_quex_param_s cn31xx;
+	struct cvmx_ipd_red_quex_param_s cn38xx;
+	struct cvmx_ipd_red_quex_param_s cn38xxp2;
+	struct cvmx_ipd_red_quex_param_s cn50xx;
+	struct cvmx_ipd_red_quex_param_s cn52xx;
+	struct cvmx_ipd_red_quex_param_s cn52xxp1;
+	struct cvmx_ipd_red_quex_param_s cn56xx;
+	struct cvmx_ipd_red_quex_param_s cn56xxp1;
+	struct cvmx_ipd_red_quex_param_s cn58xx;
+	struct cvmx_ipd_red_quex_param_s cn58xxp1;
+};
+
+union cvmx_ipd_sub_port_bp_page_cnt {
+	uint64_t u64;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s {
+		uint64_t reserved_31_63:33;
+		uint64_t port:6;
+		uint64_t page_cnt:25;
+	} s;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn30xx;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn31xx;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn38xx;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn38xxp2;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn50xx;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn52xx;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn52xxp1;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn56xx;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn56xxp1;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn58xx;
+	struct cvmx_ipd_sub_port_bp_page_cnt_s cn58xxp1;
+};
+
+union cvmx_ipd_sub_port_fcs {
+	uint64_t u64;
+	struct cvmx_ipd_sub_port_fcs_s {
+		uint64_t reserved_40_63:24;
+		uint64_t port_bit2:4;
+		uint64_t reserved_32_35:4;
+		uint64_t port_bit:32;
+	} s;
+	struct cvmx_ipd_sub_port_fcs_cn30xx {
+		uint64_t reserved_3_63:61;
+		uint64_t port_bit:3;
+	} cn30xx;
+	struct cvmx_ipd_sub_port_fcs_cn30xx cn31xx;
+	struct cvmx_ipd_sub_port_fcs_cn38xx {
+		uint64_t reserved_32_63:32;
+		uint64_t port_bit:32;
+	} cn38xx;
+	struct cvmx_ipd_sub_port_fcs_cn38xx cn38xxp2;
+	struct cvmx_ipd_sub_port_fcs_cn30xx cn50xx;
+	struct cvmx_ipd_sub_port_fcs_s cn52xx;
+	struct cvmx_ipd_sub_port_fcs_s cn52xxp1;
+	struct cvmx_ipd_sub_port_fcs_s cn56xx;
+	struct cvmx_ipd_sub_port_fcs_s cn56xxp1;
+	struct cvmx_ipd_sub_port_fcs_cn38xx cn58xx;
+	struct cvmx_ipd_sub_port_fcs_cn38xx cn58xxp1;
+};
+
+union cvmx_ipd_sub_port_qos_cnt {
+	uint64_t u64;
+	struct cvmx_ipd_sub_port_qos_cnt_s {
+		uint64_t reserved_41_63:23;
+		uint64_t port_qos:9;
+		uint64_t cnt:32;
+	} s;
+	struct cvmx_ipd_sub_port_qos_cnt_s cn52xx;
+	struct cvmx_ipd_sub_port_qos_cnt_s cn52xxp1;
+	struct cvmx_ipd_sub_port_qos_cnt_s cn56xx;
+	struct cvmx_ipd_sub_port_qos_cnt_s cn56xxp1;
+};
+
+union cvmx_ipd_wqe_fpa_queue {
+	uint64_t u64;
+	struct cvmx_ipd_wqe_fpa_queue_s {
+		uint64_t reserved_3_63:61;
+		uint64_t wqe_pool:3;
+	} s;
+	struct cvmx_ipd_wqe_fpa_queue_s cn30xx;
+	struct cvmx_ipd_wqe_fpa_queue_s cn31xx;
+	struct cvmx_ipd_wqe_fpa_queue_s cn38xx;
+	struct cvmx_ipd_wqe_fpa_queue_s cn38xxp2;
+	struct cvmx_ipd_wqe_fpa_queue_s cn50xx;
+	struct cvmx_ipd_wqe_fpa_queue_s cn52xx;
+	struct cvmx_ipd_wqe_fpa_queue_s cn52xxp1;
+	struct cvmx_ipd_wqe_fpa_queue_s cn56xx;
+	struct cvmx_ipd_wqe_fpa_queue_s cn56xxp1;
+	struct cvmx_ipd_wqe_fpa_queue_s cn58xx;
+	struct cvmx_ipd_wqe_fpa_queue_s cn58xxp1;
+};
+
+union cvmx_ipd_wqe_ptr_valid {
+	uint64_t u64;
+	struct cvmx_ipd_wqe_ptr_valid_s {
+		uint64_t reserved_29_63:35;
+		uint64_t ptr:29;
+	} s;
+	struct cvmx_ipd_wqe_ptr_valid_s cn30xx;
+	struct cvmx_ipd_wqe_ptr_valid_s cn31xx;
+	struct cvmx_ipd_wqe_ptr_valid_s cn38xx;
+	struct cvmx_ipd_wqe_ptr_valid_s cn50xx;
+	struct cvmx_ipd_wqe_ptr_valid_s cn52xx;
+	struct cvmx_ipd_wqe_ptr_valid_s cn52xxp1;
+	struct cvmx_ipd_wqe_ptr_valid_s cn56xx;
+	struct cvmx_ipd_wqe_ptr_valid_s cn56xxp1;
+	struct cvmx_ipd_wqe_ptr_valid_s cn58xx;
+	struct cvmx_ipd_wqe_ptr_valid_s cn58xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-l2c-defs.h b/arch/mips/include/asm/octeon/cvmx-l2c-defs.h
new file mode 100644
index 00000000000..337583842b5
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-l2c-defs.h
@@ -0,0 +1,963 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_L2C_DEFS_H__
+#define __CVMX_L2C_DEFS_H__
+
+#define CVMX_L2C_BST0 \
+	 CVMX_ADD_IO_SEG(0x00011800800007F8ull)
+#define CVMX_L2C_BST1 \
+	 CVMX_ADD_IO_SEG(0x00011800800007F0ull)
+#define CVMX_L2C_BST2 \
+	 CVMX_ADD_IO_SEG(0x00011800800007E8ull)
+#define CVMX_L2C_CFG \
+	 CVMX_ADD_IO_SEG(0x0001180080000000ull)
+#define CVMX_L2C_DBG \
+	 CVMX_ADD_IO_SEG(0x0001180080000030ull)
+#define CVMX_L2C_DUT \
+	 CVMX_ADD_IO_SEG(0x0001180080000050ull)
+#define CVMX_L2C_GRPWRR0 \
+	 CVMX_ADD_IO_SEG(0x00011800800000C8ull)
+#define CVMX_L2C_GRPWRR1 \
+	 CVMX_ADD_IO_SEG(0x00011800800000D0ull)
+#define CVMX_L2C_INT_EN \
+	 CVMX_ADD_IO_SEG(0x0001180080000100ull)
+#define CVMX_L2C_INT_STAT \
+	 CVMX_ADD_IO_SEG(0x00011800800000F8ull)
+#define CVMX_L2C_LCKBASE \
+	 CVMX_ADD_IO_SEG(0x0001180080000058ull)
+#define CVMX_L2C_LCKOFF \
+	 CVMX_ADD_IO_SEG(0x0001180080000060ull)
+#define CVMX_L2C_LFB0 \
+	 CVMX_ADD_IO_SEG(0x0001180080000038ull)
+#define CVMX_L2C_LFB1 \
+	 CVMX_ADD_IO_SEG(0x0001180080000040ull)
+#define CVMX_L2C_LFB2 \
+	 CVMX_ADD_IO_SEG(0x0001180080000048ull)
+#define CVMX_L2C_LFB3 \
+	 CVMX_ADD_IO_SEG(0x00011800800000B8ull)
+#define CVMX_L2C_OOB \
+	 CVMX_ADD_IO_SEG(0x00011800800000D8ull)
+#define CVMX_L2C_OOB1 \
+	 CVMX_ADD_IO_SEG(0x00011800800000E0ull)
+#define CVMX_L2C_OOB2 \
+	 CVMX_ADD_IO_SEG(0x00011800800000E8ull)
+#define CVMX_L2C_OOB3 \
+	 CVMX_ADD_IO_SEG(0x00011800800000F0ull)
+#define CVMX_L2C_PFC0 \
+	 CVMX_ADD_IO_SEG(0x0001180080000098ull)
+#define CVMX_L2C_PFC1 \
+	 CVMX_ADD_IO_SEG(0x00011800800000A0ull)
+#define CVMX_L2C_PFC2 \
+	 CVMX_ADD_IO_SEG(0x00011800800000A8ull)
+#define CVMX_L2C_PFC3 \
+	 CVMX_ADD_IO_SEG(0x00011800800000B0ull)
+#define CVMX_L2C_PFCTL \
+	 CVMX_ADD_IO_SEG(0x0001180080000090ull)
+#define CVMX_L2C_PFCX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180080000098ull + (((offset) & 3) * 8))
+#define CVMX_L2C_PPGRP \
+	 CVMX_ADD_IO_SEG(0x00011800800000C0ull)
+#define CVMX_L2C_SPAR0 \
+	 CVMX_ADD_IO_SEG(0x0001180080000068ull)
+#define CVMX_L2C_SPAR1 \
+	 CVMX_ADD_IO_SEG(0x0001180080000070ull)
+#define CVMX_L2C_SPAR2 \
+	 CVMX_ADD_IO_SEG(0x0001180080000078ull)
+#define CVMX_L2C_SPAR3 \
+	 CVMX_ADD_IO_SEG(0x0001180080000080ull)
+#define CVMX_L2C_SPAR4 \
+	 CVMX_ADD_IO_SEG(0x0001180080000088ull)
+
+union cvmx_l2c_bst0 {
+	uint64_t u64;
+	struct cvmx_l2c_bst0_s {
+		uint64_t reserved_24_63:40;
+		uint64_t dtbnk:1;
+		uint64_t wlb_msk:4;
+		uint64_t dtcnt:13;
+		uint64_t dt:1;
+		uint64_t stin_msk:1;
+		uint64_t wlb_dat:4;
+	} s;
+	struct cvmx_l2c_bst0_cn30xx {
+		uint64_t reserved_23_63:41;
+		uint64_t wlb_msk:4;
+		uint64_t reserved_15_18:4;
+		uint64_t dtcnt:9;
+		uint64_t dt:1;
+		uint64_t reserved_4_4:1;
+		uint64_t wlb_dat:4;
+	} cn30xx;
+	struct cvmx_l2c_bst0_cn31xx {
+		uint64_t reserved_23_63:41;
+		uint64_t wlb_msk:4;
+		uint64_t reserved_16_18:3;
+		uint64_t dtcnt:10;
+		uint64_t dt:1;
+		uint64_t stin_msk:1;
+		uint64_t wlb_dat:4;
+	} cn31xx;
+	struct cvmx_l2c_bst0_cn38xx {
+		uint64_t reserved_19_63:45;
+		uint64_t dtcnt:13;
+		uint64_t dt:1;
+		uint64_t stin_msk:1;
+		uint64_t wlb_dat:4;
+	} cn38xx;
+	struct cvmx_l2c_bst0_cn38xx cn38xxp2;
+	struct cvmx_l2c_bst0_cn50xx {
+		uint64_t reserved_24_63:40;
+		uint64_t dtbnk:1;
+		uint64_t wlb_msk:4;
+		uint64_t reserved_16_18:3;
+		uint64_t dtcnt:10;
+		uint64_t dt:1;
+		uint64_t stin_msk:1;
+		uint64_t wlb_dat:4;
+	} cn50xx;
+	struct cvmx_l2c_bst0_cn50xx cn52xx;
+	struct cvmx_l2c_bst0_cn50xx cn52xxp1;
+	struct cvmx_l2c_bst0_s cn56xx;
+	struct cvmx_l2c_bst0_s cn56xxp1;
+	struct cvmx_l2c_bst0_s cn58xx;
+	struct cvmx_l2c_bst0_s cn58xxp1;
+};
+
+union cvmx_l2c_bst1 {
+	uint64_t u64;
+	struct cvmx_l2c_bst1_s {
+		uint64_t reserved_9_63:55;
+		uint64_t l2t:9;
+	} s;
+	struct cvmx_l2c_bst1_cn30xx {
+		uint64_t reserved_16_63:48;
+		uint64_t vwdf:4;
+		uint64_t lrf:2;
+		uint64_t vab_vwcf:1;
+		uint64_t reserved_5_8:4;
+		uint64_t l2t:5;
+	} cn30xx;
+	struct cvmx_l2c_bst1_cn30xx cn31xx;
+	struct cvmx_l2c_bst1_cn38xx {
+		uint64_t reserved_16_63:48;
+		uint64_t vwdf:4;
+		uint64_t lrf:2;
+		uint64_t vab_vwcf:1;
+		uint64_t l2t:9;
+	} cn38xx;
+	struct cvmx_l2c_bst1_cn38xx cn38xxp2;
+	struct cvmx_l2c_bst1_cn38xx cn50xx;
+	struct cvmx_l2c_bst1_cn52xx {
+		uint64_t reserved_19_63:45;
+		uint64_t plc2:1;
+		uint64_t plc1:1;
+		uint64_t plc0:1;
+		uint64_t vwdf:4;
+		uint64_t reserved_11_11:1;
+		uint64_t ilc:1;
+		uint64_t vab_vwcf:1;
+		uint64_t l2t:9;
+	} cn52xx;
+	struct cvmx_l2c_bst1_cn52xx cn52xxp1;
+	struct cvmx_l2c_bst1_cn56xx {
+		uint64_t reserved_24_63:40;
+		uint64_t plc2:1;
+		uint64_t plc1:1;
+		uint64_t plc0:1;
+		uint64_t ilc:1;
+		uint64_t vwdf1:4;
+		uint64_t vwdf0:4;
+		uint64_t vab_vwcf1:1;
+		uint64_t reserved_10_10:1;
+		uint64_t vab_vwcf0:1;
+		uint64_t l2t:9;
+	} cn56xx;
+	struct cvmx_l2c_bst1_cn56xx cn56xxp1;
+	struct cvmx_l2c_bst1_cn38xx cn58xx;
+	struct cvmx_l2c_bst1_cn38xx cn58xxp1;
+};
+
+union cvmx_l2c_bst2 {
+	uint64_t u64;
+	struct cvmx_l2c_bst2_s {
+		uint64_t reserved_16_63:48;
+		uint64_t mrb:4;
+		uint64_t reserved_4_11:8;
+		uint64_t ipcbst:1;
+		uint64_t picbst:1;
+		uint64_t xrdmsk:1;
+		uint64_t xrddat:1;
+	} s;
+	struct cvmx_l2c_bst2_cn30xx {
+		uint64_t reserved_16_63:48;
+		uint64_t mrb:4;
+		uint64_t rmdf:4;
+		uint64_t reserved_4_7:4;
+		uint64_t ipcbst:1;
+		uint64_t reserved_2_2:1;
+		uint64_t xrdmsk:1;
+		uint64_t xrddat:1;
+	} cn30xx;
+	struct cvmx_l2c_bst2_cn30xx cn31xx;
+	struct cvmx_l2c_bst2_cn38xx {
+		uint64_t reserved_16_63:48;
+		uint64_t mrb:4;
+		uint64_t rmdf:4;
+		uint64_t rhdf:4;
+		uint64_t ipcbst:1;
+		uint64_t picbst:1;
+		uint64_t xrdmsk:1;
+		uint64_t xrddat:1;
+	} cn38xx;
+	struct cvmx_l2c_bst2_cn38xx cn38xxp2;
+	struct cvmx_l2c_bst2_cn30xx cn50xx;
+	struct cvmx_l2c_bst2_cn30xx cn52xx;
+	struct cvmx_l2c_bst2_cn30xx cn52xxp1;
+	struct cvmx_l2c_bst2_cn56xx {
+		uint64_t reserved_16_63:48;
+		uint64_t mrb:4;
+		uint64_t rmdb:4;
+		uint64_t rhdb:4;
+		uint64_t ipcbst:1;
+		uint64_t picbst:1;
+		uint64_t xrdmsk:1;
+		uint64_t xrddat:1;
+	} cn56xx;
+	struct cvmx_l2c_bst2_cn56xx cn56xxp1;
+	struct cvmx_l2c_bst2_cn56xx cn58xx;
+	struct cvmx_l2c_bst2_cn56xx cn58xxp1;
+};
+
+union cvmx_l2c_cfg {
+	uint64_t u64;
+	struct cvmx_l2c_cfg_s {
+		uint64_t reserved_20_63:44;
+		uint64_t bstrun:1;
+		uint64_t lbist:1;
+		uint64_t xor_bank:1;
+		uint64_t dpres1:1;
+		uint64_t dpres0:1;
+		uint64_t dfill_dis:1;
+		uint64_t fpexp:4;
+		uint64_t fpempty:1;
+		uint64_t fpen:1;
+		uint64_t idxalias:1;
+		uint64_t mwf_crd:4;
+		uint64_t rsp_arb_mode:1;
+		uint64_t rfb_arb_mode:1;
+		uint64_t lrf_arb_mode:1;
+	} s;
+	struct cvmx_l2c_cfg_cn30xx {
+		uint64_t reserved_14_63:50;
+		uint64_t fpexp:4;
+		uint64_t fpempty:1;
+		uint64_t fpen:1;
+		uint64_t idxalias:1;
+		uint64_t mwf_crd:4;
+		uint64_t rsp_arb_mode:1;
+		uint64_t rfb_arb_mode:1;
+		uint64_t lrf_arb_mode:1;
+	} cn30xx;
+	struct cvmx_l2c_cfg_cn30xx cn31xx;
+	struct cvmx_l2c_cfg_cn30xx cn38xx;
+	struct cvmx_l2c_cfg_cn30xx cn38xxp2;
+	struct cvmx_l2c_cfg_cn50xx {
+		uint64_t reserved_20_63:44;
+		uint64_t bstrun:1;
+		uint64_t lbist:1;
+		uint64_t reserved_14_17:4;
+		uint64_t fpexp:4;
+		uint64_t fpempty:1;
+		uint64_t fpen:1;
+		uint64_t idxalias:1;
+		uint64_t mwf_crd:4;
+		uint64_t rsp_arb_mode:1;
+		uint64_t rfb_arb_mode:1;
+		uint64_t lrf_arb_mode:1;
+	} cn50xx;
+	struct cvmx_l2c_cfg_cn50xx cn52xx;
+	struct cvmx_l2c_cfg_cn50xx cn52xxp1;
+	struct cvmx_l2c_cfg_s cn56xx;
+	struct cvmx_l2c_cfg_s cn56xxp1;
+	struct cvmx_l2c_cfg_cn58xx {
+		uint64_t reserved_20_63:44;
+		uint64_t bstrun:1;
+		uint64_t lbist:1;
+		uint64_t reserved_15_17:3;
+		uint64_t dfill_dis:1;
+		uint64_t fpexp:4;
+		uint64_t fpempty:1;
+		uint64_t fpen:1;
+		uint64_t idxalias:1;
+		uint64_t mwf_crd:4;
+		uint64_t rsp_arb_mode:1;
+		uint64_t rfb_arb_mode:1;
+		uint64_t lrf_arb_mode:1;
+	} cn58xx;
+	struct cvmx_l2c_cfg_cn58xxp1 {
+		uint64_t reserved_15_63:49;
+		uint64_t dfill_dis:1;
+		uint64_t fpexp:4;
+		uint64_t fpempty:1;
+		uint64_t fpen:1;
+		uint64_t idxalias:1;
+		uint64_t mwf_crd:4;
+		uint64_t rsp_arb_mode:1;
+		uint64_t rfb_arb_mode:1;
+		uint64_t lrf_arb_mode:1;
+	} cn58xxp1;
+};
+
+union cvmx_l2c_dbg {
+	uint64_t u64;
+	struct cvmx_l2c_dbg_s {
+		uint64_t reserved_15_63:49;
+		uint64_t lfb_enum:4;
+		uint64_t lfb_dmp:1;
+		uint64_t ppnum:4;
+		uint64_t set:3;
+		uint64_t finv:1;
+		uint64_t l2d:1;
+		uint64_t l2t:1;
+	} s;
+	struct cvmx_l2c_dbg_cn30xx {
+		uint64_t reserved_13_63:51;
+		uint64_t lfb_enum:2;
+		uint64_t lfb_dmp:1;
+		uint64_t reserved_5_9:5;
+		uint64_t set:2;
+		uint64_t finv:1;
+		uint64_t l2d:1;
+		uint64_t l2t:1;
+	} cn30xx;
+	struct cvmx_l2c_dbg_cn31xx {
+		uint64_t reserved_14_63:50;
+		uint64_t lfb_enum:3;
+		uint64_t lfb_dmp:1;
+		uint64_t reserved_7_9:3;
+		uint64_t ppnum:1;
+		uint64_t reserved_5_5:1;
+		uint64_t set:2;
+		uint64_t finv:1;
+		uint64_t l2d:1;
+		uint64_t l2t:1;
+	} cn31xx;
+	struct cvmx_l2c_dbg_s cn38xx;
+	struct cvmx_l2c_dbg_s cn38xxp2;
+	struct cvmx_l2c_dbg_cn50xx {
+		uint64_t reserved_14_63:50;
+		uint64_t lfb_enum:3;
+		uint64_t lfb_dmp:1;
+		uint64_t reserved_7_9:3;
+		uint64_t ppnum:1;
+		uint64_t set:3;
+		uint64_t finv:1;
+		uint64_t l2d:1;
+		uint64_t l2t:1;
+	} cn50xx;
+	struct cvmx_l2c_dbg_cn52xx {
+		uint64_t reserved_14_63:50;
+		uint64_t lfb_enum:3;
+		uint64_t lfb_dmp:1;
+		uint64_t reserved_8_9:2;
+		uint64_t ppnum:2;
+		uint64_t set:3;
+		uint64_t finv:1;
+		uint64_t l2d:1;
+		uint64_t l2t:1;
+	} cn52xx;
+	struct cvmx_l2c_dbg_cn52xx cn52xxp1;
+	struct cvmx_l2c_dbg_s cn56xx;
+	struct cvmx_l2c_dbg_s cn56xxp1;
+	struct cvmx_l2c_dbg_s cn58xx;
+	struct cvmx_l2c_dbg_s cn58xxp1;
+};
+
+union cvmx_l2c_dut {
+	uint64_t u64;
+	struct cvmx_l2c_dut_s {
+		uint64_t reserved_32_63:32;
+		uint64_t dtena:1;
+		uint64_t reserved_30_30:1;
+		uint64_t dt_vld:1;
+		uint64_t dt_tag:29;
+	} s;
+	struct cvmx_l2c_dut_s cn30xx;
+	struct cvmx_l2c_dut_s cn31xx;
+	struct cvmx_l2c_dut_s cn38xx;
+	struct cvmx_l2c_dut_s cn38xxp2;
+	struct cvmx_l2c_dut_s cn50xx;
+	struct cvmx_l2c_dut_s cn52xx;
+	struct cvmx_l2c_dut_s cn52xxp1;
+	struct cvmx_l2c_dut_s cn56xx;
+	struct cvmx_l2c_dut_s cn56xxp1;
+	struct cvmx_l2c_dut_s cn58xx;
+	struct cvmx_l2c_dut_s cn58xxp1;
+};
+
+union cvmx_l2c_grpwrr0 {
+	uint64_t u64;
+	struct cvmx_l2c_grpwrr0_s {
+		uint64_t plc1rmsk:32;
+		uint64_t plc0rmsk:32;
+	} s;
+	struct cvmx_l2c_grpwrr0_s cn52xx;
+	struct cvmx_l2c_grpwrr0_s cn52xxp1;
+	struct cvmx_l2c_grpwrr0_s cn56xx;
+	struct cvmx_l2c_grpwrr0_s cn56xxp1;
+};
+
+union cvmx_l2c_grpwrr1 {
+	uint64_t u64;
+	struct cvmx_l2c_grpwrr1_s {
+		uint64_t ilcrmsk:32;
+		uint64_t plc2rmsk:32;
+	} s;
+	struct cvmx_l2c_grpwrr1_s cn52xx;
+	struct cvmx_l2c_grpwrr1_s cn52xxp1;
+	struct cvmx_l2c_grpwrr1_s cn56xx;
+	struct cvmx_l2c_grpwrr1_s cn56xxp1;
+};
+
+union cvmx_l2c_int_en {
+	uint64_t u64;
+	struct cvmx_l2c_int_en_s {
+		uint64_t reserved_9_63:55;
+		uint64_t lck2ena:1;
+		uint64_t lckena:1;
+		uint64_t l2ddeden:1;
+		uint64_t l2dsecen:1;
+		uint64_t l2tdeden:1;
+		uint64_t l2tsecen:1;
+		uint64_t oob3en:1;
+		uint64_t oob2en:1;
+		uint64_t oob1en:1;
+	} s;
+	struct cvmx_l2c_int_en_s cn52xx;
+	struct cvmx_l2c_int_en_s cn52xxp1;
+	struct cvmx_l2c_int_en_s cn56xx;
+	struct cvmx_l2c_int_en_s cn56xxp1;
+};
+
+union cvmx_l2c_int_stat {
+	uint64_t u64;
+	struct cvmx_l2c_int_stat_s {
+		uint64_t reserved_9_63:55;
+		uint64_t lck2:1;
+		uint64_t lck:1;
+		uint64_t l2dded:1;
+		uint64_t l2dsec:1;
+		uint64_t l2tded:1;
+		uint64_t l2tsec:1;
+		uint64_t oob3:1;
+		uint64_t oob2:1;
+		uint64_t oob1:1;
+	} s;
+	struct cvmx_l2c_int_stat_s cn52xx;
+	struct cvmx_l2c_int_stat_s cn52xxp1;
+	struct cvmx_l2c_int_stat_s cn56xx;
+	struct cvmx_l2c_int_stat_s cn56xxp1;
+};
+
+union cvmx_l2c_lckbase {
+	uint64_t u64;
+	struct cvmx_l2c_lckbase_s {
+		uint64_t reserved_31_63:33;
+		uint64_t lck_base:27;
+		uint64_t reserved_1_3:3;
+		uint64_t lck_ena:1;
+	} s;
+	struct cvmx_l2c_lckbase_s cn30xx;
+	struct cvmx_l2c_lckbase_s cn31xx;
+	struct cvmx_l2c_lckbase_s cn38xx;
+	struct cvmx_l2c_lckbase_s cn38xxp2;
+	struct cvmx_l2c_lckbase_s cn50xx;
+	struct cvmx_l2c_lckbase_s cn52xx;
+	struct cvmx_l2c_lckbase_s cn52xxp1;
+	struct cvmx_l2c_lckbase_s cn56xx;
+	struct cvmx_l2c_lckbase_s cn56xxp1;
+	struct cvmx_l2c_lckbase_s cn58xx;
+	struct cvmx_l2c_lckbase_s cn58xxp1;
+};
+
+union cvmx_l2c_lckoff {
+	uint64_t u64;
+	struct cvmx_l2c_lckoff_s {
+		uint64_t reserved_10_63:54;
+		uint64_t lck_offset:10;
+	} s;
+	struct cvmx_l2c_lckoff_s cn30xx;
+	struct cvmx_l2c_lckoff_s cn31xx;
+	struct cvmx_l2c_lckoff_s cn38xx;
+	struct cvmx_l2c_lckoff_s cn38xxp2;
+	struct cvmx_l2c_lckoff_s cn50xx;
+	struct cvmx_l2c_lckoff_s cn52xx;
+	struct cvmx_l2c_lckoff_s cn52xxp1;
+	struct cvmx_l2c_lckoff_s cn56xx;
+	struct cvmx_l2c_lckoff_s cn56xxp1;
+	struct cvmx_l2c_lckoff_s cn58xx;
+	struct cvmx_l2c_lckoff_s cn58xxp1;
+};
+
+union cvmx_l2c_lfb0 {
+	uint64_t u64;
+	struct cvmx_l2c_lfb0_s {
+		uint64_t reserved_32_63:32;
+		uint64_t stcpnd:1;
+		uint64_t stpnd:1;
+		uint64_t stinv:1;
+		uint64_t stcfl:1;
+		uint64_t vam:1;
+		uint64_t inxt:4;
+		uint64_t itl:1;
+		uint64_t ihd:1;
+		uint64_t set:3;
+		uint64_t vabnum:4;
+		uint64_t sid:9;
+		uint64_t cmd:4;
+		uint64_t vld:1;
+	} s;
+	struct cvmx_l2c_lfb0_cn30xx {
+		uint64_t reserved_32_63:32;
+		uint64_t stcpnd:1;
+		uint64_t stpnd:1;
+		uint64_t stinv:1;
+		uint64_t stcfl:1;
+		uint64_t vam:1;
+		uint64_t reserved_25_26:2;
+		uint64_t inxt:2;
+		uint64_t itl:1;
+		uint64_t ihd:1;
+		uint64_t reserved_20_20:1;
+		uint64_t set:2;
+		uint64_t reserved_16_17:2;
+		uint64_t vabnum:2;
+		uint64_t sid:9;
+		uint64_t cmd:4;
+		uint64_t vld:1;
+	} cn30xx;
+	struct cvmx_l2c_lfb0_cn31xx {
+		uint64_t reserved_32_63:32;
+		uint64_t stcpnd:1;
+		uint64_t stpnd:1;
+		uint64_t stinv:1;
+		uint64_t stcfl:1;
+		uint64_t vam:1;
+		uint64_t reserved_26_26:1;
+		uint64_t inxt:3;
+		uint64_t itl:1;
+		uint64_t ihd:1;
+		uint64_t reserved_20_20:1;
+		uint64_t set:2;
+		uint64_t reserved_17_17:1;
+		uint64_t vabnum:3;
+		uint64_t sid:9;
+		uint64_t cmd:4;
+		uint64_t vld:1;
+	} cn31xx;
+	struct cvmx_l2c_lfb0_s cn38xx;
+	struct cvmx_l2c_lfb0_s cn38xxp2;
+	struct cvmx_l2c_lfb0_cn50xx {
+		uint64_t reserved_32_63:32;
+		uint64_t stcpnd:1;
+		uint64_t stpnd:1;
+		uint64_t stinv:1;
+		uint64_t stcfl:1;
+		uint64_t vam:1;
+		uint64_t reserved_26_26:1;
+		uint64_t inxt:3;
+		uint64_t itl:1;
+		uint64_t ihd:1;
+		uint64_t set:3;
+		uint64_t reserved_17_17:1;
+		uint64_t vabnum:3;
+		uint64_t sid:9;
+		uint64_t cmd:4;
+		uint64_t vld:1;
+	} cn50xx;
+	struct cvmx_l2c_lfb0_cn50xx cn52xx;
+	struct cvmx_l2c_lfb0_cn50xx cn52xxp1;
+	struct cvmx_l2c_lfb0_s cn56xx;
+	struct cvmx_l2c_lfb0_s cn56xxp1;
+	struct cvmx_l2c_lfb0_s cn58xx;
+	struct cvmx_l2c_lfb0_s cn58xxp1;
+};
+
+union cvmx_l2c_lfb1 {
+	uint64_t u64;
+	struct cvmx_l2c_lfb1_s {
+		uint64_t reserved_19_63:45;
+		uint64_t dsgoing:1;
+		uint64_t bid:2;
+		uint64_t wtrsp:1;
+		uint64_t wtdw:1;
+		uint64_t wtdq:1;
+		uint64_t wtwhp:1;
+		uint64_t wtwhf:1;
+		uint64_t wtwrm:1;
+		uint64_t wtstm:1;
+		uint64_t wtrda:1;
+		uint64_t wtstdt:1;
+		uint64_t wtstrsp:1;
+		uint64_t wtstrsc:1;
+		uint64_t wtvtm:1;
+		uint64_t wtmfl:1;
+		uint64_t prbrty:1;
+		uint64_t wtprb:1;
+		uint64_t vld:1;
+	} s;
+	struct cvmx_l2c_lfb1_s cn30xx;
+	struct cvmx_l2c_lfb1_s cn31xx;
+	struct cvmx_l2c_lfb1_s cn38xx;
+	struct cvmx_l2c_lfb1_s cn38xxp2;
+	struct cvmx_l2c_lfb1_s cn50xx;
+	struct cvmx_l2c_lfb1_s cn52xx;
+	struct cvmx_l2c_lfb1_s cn52xxp1;
+	struct cvmx_l2c_lfb1_s cn56xx;
+	struct cvmx_l2c_lfb1_s cn56xxp1;
+	struct cvmx_l2c_lfb1_s cn58xx;
+	struct cvmx_l2c_lfb1_s cn58xxp1;
+};
+
+union cvmx_l2c_lfb2 {
+	uint64_t u64;
+	struct cvmx_l2c_lfb2_s {
+		uint64_t reserved_0_63:64;
+	} s;
+	struct cvmx_l2c_lfb2_cn30xx {
+		uint64_t reserved_27_63:37;
+		uint64_t lfb_tag:19;
+		uint64_t lfb_idx:8;
+	} cn30xx;
+	struct cvmx_l2c_lfb2_cn31xx {
+		uint64_t reserved_27_63:37;
+		uint64_t lfb_tag:17;
+		uint64_t lfb_idx:10;
+	} cn31xx;
+	struct cvmx_l2c_lfb2_cn31xx cn38xx;
+	struct cvmx_l2c_lfb2_cn31xx cn38xxp2;
+	struct cvmx_l2c_lfb2_cn50xx {
+		uint64_t reserved_27_63:37;
+		uint64_t lfb_tag:20;
+		uint64_t lfb_idx:7;
+	} cn50xx;
+	struct cvmx_l2c_lfb2_cn52xx {
+		uint64_t reserved_27_63:37;
+		uint64_t lfb_tag:18;
+		uint64_t lfb_idx:9;
+	} cn52xx;
+	struct cvmx_l2c_lfb2_cn52xx cn52xxp1;
+	struct cvmx_l2c_lfb2_cn56xx {
+		uint64_t reserved_27_63:37;
+		uint64_t lfb_tag:16;
+		uint64_t lfb_idx:11;
+	} cn56xx;
+	struct cvmx_l2c_lfb2_cn56xx cn56xxp1;
+	struct cvmx_l2c_lfb2_cn56xx cn58xx;
+	struct cvmx_l2c_lfb2_cn56xx cn58xxp1;
+};
+
+union cvmx_l2c_lfb3 {
+	uint64_t u64;
+	struct cvmx_l2c_lfb3_s {
+		uint64_t reserved_5_63:59;
+		uint64_t stpartdis:1;
+		uint64_t lfb_hwm:4;
+	} s;
+	struct cvmx_l2c_lfb3_cn30xx {
+		uint64_t reserved_5_63:59;
+		uint64_t stpartdis:1;
+		uint64_t reserved_2_3:2;
+		uint64_t lfb_hwm:2;
+	} cn30xx;
+	struct cvmx_l2c_lfb3_cn31xx {
+		uint64_t reserved_5_63:59;
+		uint64_t stpartdis:1;
+		uint64_t reserved_3_3:1;
+		uint64_t lfb_hwm:3;
+	} cn31xx;
+	struct cvmx_l2c_lfb3_s cn38xx;
+	struct cvmx_l2c_lfb3_s cn38xxp2;
+	struct cvmx_l2c_lfb3_cn31xx cn50xx;
+	struct cvmx_l2c_lfb3_cn31xx cn52xx;
+	struct cvmx_l2c_lfb3_cn31xx cn52xxp1;
+	struct cvmx_l2c_lfb3_s cn56xx;
+	struct cvmx_l2c_lfb3_s cn56xxp1;
+	struct cvmx_l2c_lfb3_s cn58xx;
+	struct cvmx_l2c_lfb3_s cn58xxp1;
+};
+
+union cvmx_l2c_oob {
+	uint64_t u64;
+	struct cvmx_l2c_oob_s {
+		uint64_t reserved_2_63:62;
+		uint64_t dwbena:1;
+		uint64_t stena:1;
+	} s;
+	struct cvmx_l2c_oob_s cn52xx;
+	struct cvmx_l2c_oob_s cn52xxp1;
+	struct cvmx_l2c_oob_s cn56xx;
+	struct cvmx_l2c_oob_s cn56xxp1;
+};
+
+union cvmx_l2c_oob1 {
+	uint64_t u64;
+	struct cvmx_l2c_oob1_s {
+		uint64_t fadr:27;
+		uint64_t fsrc:1;
+		uint64_t reserved_34_35:2;
+		uint64_t sadr:14;
+		uint64_t reserved_14_19:6;
+		uint64_t size:14;
+	} s;
+	struct cvmx_l2c_oob1_s cn52xx;
+	struct cvmx_l2c_oob1_s cn52xxp1;
+	struct cvmx_l2c_oob1_s cn56xx;
+	struct cvmx_l2c_oob1_s cn56xxp1;
+};
+
+union cvmx_l2c_oob2 {
+	uint64_t u64;
+	struct cvmx_l2c_oob2_s {
+		uint64_t fadr:27;
+		uint64_t fsrc:1;
+		uint64_t reserved_34_35:2;
+		uint64_t sadr:14;
+		uint64_t reserved_14_19:6;
+		uint64_t size:14;
+	} s;
+	struct cvmx_l2c_oob2_s cn52xx;
+	struct cvmx_l2c_oob2_s cn52xxp1;
+	struct cvmx_l2c_oob2_s cn56xx;
+	struct cvmx_l2c_oob2_s cn56xxp1;
+};
+
+union cvmx_l2c_oob3 {
+	uint64_t u64;
+	struct cvmx_l2c_oob3_s {
+		uint64_t fadr:27;
+		uint64_t fsrc:1;
+		uint64_t reserved_34_35:2;
+		uint64_t sadr:14;
+		uint64_t reserved_14_19:6;
+		uint64_t size:14;
+	} s;
+	struct cvmx_l2c_oob3_s cn52xx;
+	struct cvmx_l2c_oob3_s cn52xxp1;
+	struct cvmx_l2c_oob3_s cn56xx;
+	struct cvmx_l2c_oob3_s cn56xxp1;
+};
+
+union cvmx_l2c_pfcx {
+	uint64_t u64;
+	struct cvmx_l2c_pfcx_s {
+		uint64_t reserved_36_63:28;
+		uint64_t pfcnt0:36;
+	} s;
+	struct cvmx_l2c_pfcx_s cn30xx;
+	struct cvmx_l2c_pfcx_s cn31xx;
+	struct cvmx_l2c_pfcx_s cn38xx;
+	struct cvmx_l2c_pfcx_s cn38xxp2;
+	struct cvmx_l2c_pfcx_s cn50xx;
+	struct cvmx_l2c_pfcx_s cn52xx;
+	struct cvmx_l2c_pfcx_s cn52xxp1;
+	struct cvmx_l2c_pfcx_s cn56xx;
+	struct cvmx_l2c_pfcx_s cn56xxp1;
+	struct cvmx_l2c_pfcx_s cn58xx;
+	struct cvmx_l2c_pfcx_s cn58xxp1;
+};
+
+union cvmx_l2c_pfctl {
+	uint64_t u64;
+	struct cvmx_l2c_pfctl_s {
+		uint64_t reserved_36_63:28;
+		uint64_t cnt3rdclr:1;
+		uint64_t cnt2rdclr:1;
+		uint64_t cnt1rdclr:1;
+		uint64_t cnt0rdclr:1;
+		uint64_t cnt3ena:1;
+		uint64_t cnt3clr:1;
+		uint64_t cnt3sel:6;
+		uint64_t cnt2ena:1;
+		uint64_t cnt2clr:1;
+		uint64_t cnt2sel:6;
+		uint64_t cnt1ena:1;
+		uint64_t cnt1clr:1;
+		uint64_t cnt1sel:6;
+		uint64_t cnt0ena:1;
+		uint64_t cnt0clr:1;
+		uint64_t cnt0sel:6;
+	} s;
+	struct cvmx_l2c_pfctl_s cn30xx;
+	struct cvmx_l2c_pfctl_s cn31xx;
+	struct cvmx_l2c_pfctl_s cn38xx;
+	struct cvmx_l2c_pfctl_s cn38xxp2;
+	struct cvmx_l2c_pfctl_s cn50xx;
+	struct cvmx_l2c_pfctl_s cn52xx;
+	struct cvmx_l2c_pfctl_s cn52xxp1;
+	struct cvmx_l2c_pfctl_s cn56xx;
+	struct cvmx_l2c_pfctl_s cn56xxp1;
+	struct cvmx_l2c_pfctl_s cn58xx;
+	struct cvmx_l2c_pfctl_s cn58xxp1;
+};
+
+union cvmx_l2c_ppgrp {
+	uint64_t u64;
+	struct cvmx_l2c_ppgrp_s {
+		uint64_t reserved_24_63:40;
+		uint64_t pp11grp:2;
+		uint64_t pp10grp:2;
+		uint64_t pp9grp:2;
+		uint64_t pp8grp:2;
+		uint64_t pp7grp:2;
+		uint64_t pp6grp:2;
+		uint64_t pp5grp:2;
+		uint64_t pp4grp:2;
+		uint64_t pp3grp:2;
+		uint64_t pp2grp:2;
+		uint64_t pp1grp:2;
+		uint64_t pp0grp:2;
+	} s;
+	struct cvmx_l2c_ppgrp_cn52xx {
+		uint64_t reserved_8_63:56;
+		uint64_t pp3grp:2;
+		uint64_t pp2grp:2;
+		uint64_t pp1grp:2;
+		uint64_t pp0grp:2;
+	} cn52xx;
+	struct cvmx_l2c_ppgrp_cn52xx cn52xxp1;
+	struct cvmx_l2c_ppgrp_s cn56xx;
+	struct cvmx_l2c_ppgrp_s cn56xxp1;
+};
+
+union cvmx_l2c_spar0 {
+	uint64_t u64;
+	struct cvmx_l2c_spar0_s {
+		uint64_t reserved_32_63:32;
+		uint64_t umsk3:8;
+		uint64_t umsk2:8;
+		uint64_t umsk1:8;
+		uint64_t umsk0:8;
+	} s;
+	struct cvmx_l2c_spar0_cn30xx {
+		uint64_t reserved_4_63:60;
+		uint64_t umsk0:4;
+	} cn30xx;
+	struct cvmx_l2c_spar0_cn31xx {
+		uint64_t reserved_12_63:52;
+		uint64_t umsk1:4;
+		uint64_t reserved_4_7:4;
+		uint64_t umsk0:4;
+	} cn31xx;
+	struct cvmx_l2c_spar0_s cn38xx;
+	struct cvmx_l2c_spar0_s cn38xxp2;
+	struct cvmx_l2c_spar0_cn50xx {
+		uint64_t reserved_16_63:48;
+		uint64_t umsk1:8;
+		uint64_t umsk0:8;
+	} cn50xx;
+	struct cvmx_l2c_spar0_s cn52xx;
+	struct cvmx_l2c_spar0_s cn52xxp1;
+	struct cvmx_l2c_spar0_s cn56xx;
+	struct cvmx_l2c_spar0_s cn56xxp1;
+	struct cvmx_l2c_spar0_s cn58xx;
+	struct cvmx_l2c_spar0_s cn58xxp1;
+};
+
+union cvmx_l2c_spar1 {
+	uint64_t u64;
+	struct cvmx_l2c_spar1_s {
+		uint64_t reserved_32_63:32;
+		uint64_t umsk7:8;
+		uint64_t umsk6:8;
+		uint64_t umsk5:8;
+		uint64_t umsk4:8;
+	} s;
+	struct cvmx_l2c_spar1_s cn38xx;
+	struct cvmx_l2c_spar1_s cn38xxp2;
+	struct cvmx_l2c_spar1_s cn56xx;
+	struct cvmx_l2c_spar1_s cn56xxp1;
+	struct cvmx_l2c_spar1_s cn58xx;
+	struct cvmx_l2c_spar1_s cn58xxp1;
+};
+
+union cvmx_l2c_spar2 {
+	uint64_t u64;
+	struct cvmx_l2c_spar2_s {
+		uint64_t reserved_32_63:32;
+		uint64_t umsk11:8;
+		uint64_t umsk10:8;
+		uint64_t umsk9:8;
+		uint64_t umsk8:8;
+	} s;
+	struct cvmx_l2c_spar2_s cn38xx;
+	struct cvmx_l2c_spar2_s cn38xxp2;
+	struct cvmx_l2c_spar2_s cn56xx;
+	struct cvmx_l2c_spar2_s cn56xxp1;
+	struct cvmx_l2c_spar2_s cn58xx;
+	struct cvmx_l2c_spar2_s cn58xxp1;
+};
+
+union cvmx_l2c_spar3 {
+	uint64_t u64;
+	struct cvmx_l2c_spar3_s {
+		uint64_t reserved_32_63:32;
+		uint64_t umsk15:8;
+		uint64_t umsk14:8;
+		uint64_t umsk13:8;
+		uint64_t umsk12:8;
+	} s;
+	struct cvmx_l2c_spar3_s cn38xx;
+	struct cvmx_l2c_spar3_s cn38xxp2;
+	struct cvmx_l2c_spar3_s cn58xx;
+	struct cvmx_l2c_spar3_s cn58xxp1;
+};
+
+union cvmx_l2c_spar4 {
+	uint64_t u64;
+	struct cvmx_l2c_spar4_s {
+		uint64_t reserved_8_63:56;
+		uint64_t umskiob:8;
+	} s;
+	struct cvmx_l2c_spar4_cn30xx {
+		uint64_t reserved_4_63:60;
+		uint64_t umskiob:4;
+	} cn30xx;
+	struct cvmx_l2c_spar4_cn30xx cn31xx;
+	struct cvmx_l2c_spar4_s cn38xx;
+	struct cvmx_l2c_spar4_s cn38xxp2;
+	struct cvmx_l2c_spar4_s cn50xx;
+	struct cvmx_l2c_spar4_s cn52xx;
+	struct cvmx_l2c_spar4_s cn52xxp1;
+	struct cvmx_l2c_spar4_s cn56xx;
+	struct cvmx_l2c_spar4_s cn56xxp1;
+	struct cvmx_l2c_spar4_s cn58xx;
+	struct cvmx_l2c_spar4_s cn58xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-l2d-defs.h b/arch/mips/include/asm/octeon/cvmx-l2d-defs.h
new file mode 100644
index 00000000000..d7102d455e1
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-l2d-defs.h
@@ -0,0 +1,369 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_L2D_DEFS_H__
+#define __CVMX_L2D_DEFS_H__
+
+#define CVMX_L2D_BST0 \
+	 CVMX_ADD_IO_SEG(0x0001180080000780ull)
+#define CVMX_L2D_BST1 \
+	 CVMX_ADD_IO_SEG(0x0001180080000788ull)
+#define CVMX_L2D_BST2 \
+	 CVMX_ADD_IO_SEG(0x0001180080000790ull)
+#define CVMX_L2D_BST3 \
+	 CVMX_ADD_IO_SEG(0x0001180080000798ull)
+#define CVMX_L2D_ERR \
+	 CVMX_ADD_IO_SEG(0x0001180080000010ull)
+#define CVMX_L2D_FADR \
+	 CVMX_ADD_IO_SEG(0x0001180080000018ull)
+#define CVMX_L2D_FSYN0 \
+	 CVMX_ADD_IO_SEG(0x0001180080000020ull)
+#define CVMX_L2D_FSYN1 \
+	 CVMX_ADD_IO_SEG(0x0001180080000028ull)
+#define CVMX_L2D_FUS0 \
+	 CVMX_ADD_IO_SEG(0x00011800800007A0ull)
+#define CVMX_L2D_FUS1 \
+	 CVMX_ADD_IO_SEG(0x00011800800007A8ull)
+#define CVMX_L2D_FUS2 \
+	 CVMX_ADD_IO_SEG(0x00011800800007B0ull)
+#define CVMX_L2D_FUS3 \
+	 CVMX_ADD_IO_SEG(0x00011800800007B8ull)
+
+union cvmx_l2d_bst0 {
+	uint64_t u64;
+	struct cvmx_l2d_bst0_s {
+		uint64_t reserved_35_63:29;
+		uint64_t ftl:1;
+		uint64_t q0stat:34;
+	} s;
+	struct cvmx_l2d_bst0_s cn30xx;
+	struct cvmx_l2d_bst0_s cn31xx;
+	struct cvmx_l2d_bst0_s cn38xx;
+	struct cvmx_l2d_bst0_s cn38xxp2;
+	struct cvmx_l2d_bst0_s cn50xx;
+	struct cvmx_l2d_bst0_s cn52xx;
+	struct cvmx_l2d_bst0_s cn52xxp1;
+	struct cvmx_l2d_bst0_s cn56xx;
+	struct cvmx_l2d_bst0_s cn56xxp1;
+	struct cvmx_l2d_bst0_s cn58xx;
+	struct cvmx_l2d_bst0_s cn58xxp1;
+};
+
+union cvmx_l2d_bst1 {
+	uint64_t u64;
+	struct cvmx_l2d_bst1_s {
+		uint64_t reserved_34_63:30;
+		uint64_t q1stat:34;
+	} s;
+	struct cvmx_l2d_bst1_s cn30xx;
+	struct cvmx_l2d_bst1_s cn31xx;
+	struct cvmx_l2d_bst1_s cn38xx;
+	struct cvmx_l2d_bst1_s cn38xxp2;
+	struct cvmx_l2d_bst1_s cn50xx;
+	struct cvmx_l2d_bst1_s cn52xx;
+	struct cvmx_l2d_bst1_s cn52xxp1;
+	struct cvmx_l2d_bst1_s cn56xx;
+	struct cvmx_l2d_bst1_s cn56xxp1;
+	struct cvmx_l2d_bst1_s cn58xx;
+	struct cvmx_l2d_bst1_s cn58xxp1;
+};
+
+union cvmx_l2d_bst2 {
+	uint64_t u64;
+	struct cvmx_l2d_bst2_s {
+		uint64_t reserved_34_63:30;
+		uint64_t q2stat:34;
+	} s;
+	struct cvmx_l2d_bst2_s cn30xx;
+	struct cvmx_l2d_bst2_s cn31xx;
+	struct cvmx_l2d_bst2_s cn38xx;
+	struct cvmx_l2d_bst2_s cn38xxp2;
+	struct cvmx_l2d_bst2_s cn50xx;
+	struct cvmx_l2d_bst2_s cn52xx;
+	struct cvmx_l2d_bst2_s cn52xxp1;
+	struct cvmx_l2d_bst2_s cn56xx;
+	struct cvmx_l2d_bst2_s cn56xxp1;
+	struct cvmx_l2d_bst2_s cn58xx;
+	struct cvmx_l2d_bst2_s cn58xxp1;
+};
+
+union cvmx_l2d_bst3 {
+	uint64_t u64;
+	struct cvmx_l2d_bst3_s {
+		uint64_t reserved_34_63:30;
+		uint64_t q3stat:34;
+	} s;
+	struct cvmx_l2d_bst3_s cn30xx;
+	struct cvmx_l2d_bst3_s cn31xx;
+	struct cvmx_l2d_bst3_s cn38xx;
+	struct cvmx_l2d_bst3_s cn38xxp2;
+	struct cvmx_l2d_bst3_s cn50xx;
+	struct cvmx_l2d_bst3_s cn52xx;
+	struct cvmx_l2d_bst3_s cn52xxp1;
+	struct cvmx_l2d_bst3_s cn56xx;
+	struct cvmx_l2d_bst3_s cn56xxp1;
+	struct cvmx_l2d_bst3_s cn58xx;
+	struct cvmx_l2d_bst3_s cn58xxp1;
+};
+
+union cvmx_l2d_err {
+	uint64_t u64;
+	struct cvmx_l2d_err_s {
+		uint64_t reserved_6_63:58;
+		uint64_t bmhclsel:1;
+		uint64_t ded_err:1;
+		uint64_t sec_err:1;
+		uint64_t ded_intena:1;
+		uint64_t sec_intena:1;
+		uint64_t ecc_ena:1;
+	} s;
+	struct cvmx_l2d_err_s cn30xx;
+	struct cvmx_l2d_err_s cn31xx;
+	struct cvmx_l2d_err_s cn38xx;
+	struct cvmx_l2d_err_s cn38xxp2;
+	struct cvmx_l2d_err_s cn50xx;
+	struct cvmx_l2d_err_s cn52xx;
+	struct cvmx_l2d_err_s cn52xxp1;
+	struct cvmx_l2d_err_s cn56xx;
+	struct cvmx_l2d_err_s cn56xxp1;
+	struct cvmx_l2d_err_s cn58xx;
+	struct cvmx_l2d_err_s cn58xxp1;
+};
+
+union cvmx_l2d_fadr {
+	uint64_t u64;
+	struct cvmx_l2d_fadr_s {
+		uint64_t reserved_19_63:45;
+		uint64_t fadru:1;
+		uint64_t fowmsk:4;
+		uint64_t fset:3;
+		uint64_t fadr:11;
+	} s;
+	struct cvmx_l2d_fadr_cn30xx {
+		uint64_t reserved_18_63:46;
+		uint64_t fowmsk:4;
+		uint64_t reserved_13_13:1;
+		uint64_t fset:2;
+		uint64_t reserved_9_10:2;
+		uint64_t fadr:9;
+	} cn30xx;
+	struct cvmx_l2d_fadr_cn31xx {
+		uint64_t reserved_18_63:46;
+		uint64_t fowmsk:4;
+		uint64_t reserved_13_13:1;
+		uint64_t fset:2;
+		uint64_t reserved_10_10:1;
+		uint64_t fadr:10;
+	} cn31xx;
+	struct cvmx_l2d_fadr_cn38xx {
+		uint64_t reserved_18_63:46;
+		uint64_t fowmsk:4;
+		uint64_t fset:3;
+		uint64_t fadr:11;
+	} cn38xx;
+	struct cvmx_l2d_fadr_cn38xx cn38xxp2;
+	struct cvmx_l2d_fadr_cn50xx {
+		uint64_t reserved_18_63:46;
+		uint64_t fowmsk:4;
+		uint64_t fset:3;
+		uint64_t reserved_8_10:3;
+		uint64_t fadr:8;
+	} cn50xx;
+	struct cvmx_l2d_fadr_cn52xx {
+		uint64_t reserved_18_63:46;
+		uint64_t fowmsk:4;
+		uint64_t fset:3;
+		uint64_t reserved_10_10:1;
+		uint64_t fadr:10;
+	} cn52xx;
+	struct cvmx_l2d_fadr_cn52xx cn52xxp1;
+	struct cvmx_l2d_fadr_s cn56xx;
+	struct cvmx_l2d_fadr_s cn56xxp1;
+	struct cvmx_l2d_fadr_s cn58xx;
+	struct cvmx_l2d_fadr_s cn58xxp1;
+};
+
+union cvmx_l2d_fsyn0 {
+	uint64_t u64;
+	struct cvmx_l2d_fsyn0_s {
+		uint64_t reserved_20_63:44;
+		uint64_t fsyn_ow1:10;
+		uint64_t fsyn_ow0:10;
+	} s;
+	struct cvmx_l2d_fsyn0_s cn30xx;
+	struct cvmx_l2d_fsyn0_s cn31xx;
+	struct cvmx_l2d_fsyn0_s cn38xx;
+	struct cvmx_l2d_fsyn0_s cn38xxp2;
+	struct cvmx_l2d_fsyn0_s cn50xx;
+	struct cvmx_l2d_fsyn0_s cn52xx;
+	struct cvmx_l2d_fsyn0_s cn52xxp1;
+	struct cvmx_l2d_fsyn0_s cn56xx;
+	struct cvmx_l2d_fsyn0_s cn56xxp1;
+	struct cvmx_l2d_fsyn0_s cn58xx;
+	struct cvmx_l2d_fsyn0_s cn58xxp1;
+};
+
+union cvmx_l2d_fsyn1 {
+	uint64_t u64;
+	struct cvmx_l2d_fsyn1_s {
+		uint64_t reserved_20_63:44;
+		uint64_t fsyn_ow3:10;
+		uint64_t fsyn_ow2:10;
+	} s;
+	struct cvmx_l2d_fsyn1_s cn30xx;
+	struct cvmx_l2d_fsyn1_s cn31xx;
+	struct cvmx_l2d_fsyn1_s cn38xx;
+	struct cvmx_l2d_fsyn1_s cn38xxp2;
+	struct cvmx_l2d_fsyn1_s cn50xx;
+	struct cvmx_l2d_fsyn1_s cn52xx;
+	struct cvmx_l2d_fsyn1_s cn52xxp1;
+	struct cvmx_l2d_fsyn1_s cn56xx;
+	struct cvmx_l2d_fsyn1_s cn56xxp1;
+	struct cvmx_l2d_fsyn1_s cn58xx;
+	struct cvmx_l2d_fsyn1_s cn58xxp1;
+};
+
+union cvmx_l2d_fus0 {
+	uint64_t u64;
+	struct cvmx_l2d_fus0_s {
+		uint64_t reserved_34_63:30;
+		uint64_t q0fus:34;
+	} s;
+	struct cvmx_l2d_fus0_s cn30xx;
+	struct cvmx_l2d_fus0_s cn31xx;
+	struct cvmx_l2d_fus0_s cn38xx;
+	struct cvmx_l2d_fus0_s cn38xxp2;
+	struct cvmx_l2d_fus0_s cn50xx;
+	struct cvmx_l2d_fus0_s cn52xx;
+	struct cvmx_l2d_fus0_s cn52xxp1;
+	struct cvmx_l2d_fus0_s cn56xx;
+	struct cvmx_l2d_fus0_s cn56xxp1;
+	struct cvmx_l2d_fus0_s cn58xx;
+	struct cvmx_l2d_fus0_s cn58xxp1;
+};
+
+union cvmx_l2d_fus1 {
+	uint64_t u64;
+	struct cvmx_l2d_fus1_s {
+		uint64_t reserved_34_63:30;
+		uint64_t q1fus:34;
+	} s;
+	struct cvmx_l2d_fus1_s cn30xx;
+	struct cvmx_l2d_fus1_s cn31xx;
+	struct cvmx_l2d_fus1_s cn38xx;
+	struct cvmx_l2d_fus1_s cn38xxp2;
+	struct cvmx_l2d_fus1_s cn50xx;
+	struct cvmx_l2d_fus1_s cn52xx;
+	struct cvmx_l2d_fus1_s cn52xxp1;
+	struct cvmx_l2d_fus1_s cn56xx;
+	struct cvmx_l2d_fus1_s cn56xxp1;
+	struct cvmx_l2d_fus1_s cn58xx;
+	struct cvmx_l2d_fus1_s cn58xxp1;
+};
+
+union cvmx_l2d_fus2 {
+	uint64_t u64;
+	struct cvmx_l2d_fus2_s {
+		uint64_t reserved_34_63:30;
+		uint64_t q2fus:34;
+	} s;
+	struct cvmx_l2d_fus2_s cn30xx;
+	struct cvmx_l2d_fus2_s cn31xx;
+	struct cvmx_l2d_fus2_s cn38xx;
+	struct cvmx_l2d_fus2_s cn38xxp2;
+	struct cvmx_l2d_fus2_s cn50xx;
+	struct cvmx_l2d_fus2_s cn52xx;
+	struct cvmx_l2d_fus2_s cn52xxp1;
+	struct cvmx_l2d_fus2_s cn56xx;
+	struct cvmx_l2d_fus2_s cn56xxp1;
+	struct cvmx_l2d_fus2_s cn58xx;
+	struct cvmx_l2d_fus2_s cn58xxp1;
+};
+
+union cvmx_l2d_fus3 {
+	uint64_t u64;
+	struct cvmx_l2d_fus3_s {
+		uint64_t reserved_40_63:24;
+		uint64_t ema_ctl:3;
+		uint64_t reserved_34_36:3;
+		uint64_t q3fus:34;
+	} s;
+	struct cvmx_l2d_fus3_cn30xx {
+		uint64_t reserved_35_63:29;
+		uint64_t crip_64k:1;
+		uint64_t q3fus:34;
+	} cn30xx;
+	struct cvmx_l2d_fus3_cn31xx {
+		uint64_t reserved_35_63:29;
+		uint64_t crip_128k:1;
+		uint64_t q3fus:34;
+	} cn31xx;
+	struct cvmx_l2d_fus3_cn38xx {
+		uint64_t reserved_36_63:28;
+		uint64_t crip_256k:1;
+		uint64_t crip_512k:1;
+		uint64_t q3fus:34;
+	} cn38xx;
+	struct cvmx_l2d_fus3_cn38xx cn38xxp2;
+	struct cvmx_l2d_fus3_cn50xx {
+		uint64_t reserved_40_63:24;
+		uint64_t ema_ctl:3;
+		uint64_t reserved_36_36:1;
+		uint64_t crip_32k:1;
+		uint64_t crip_64k:1;
+		uint64_t q3fus:34;
+	} cn50xx;
+	struct cvmx_l2d_fus3_cn52xx {
+		uint64_t reserved_40_63:24;
+		uint64_t ema_ctl:3;
+		uint64_t reserved_36_36:1;
+		uint64_t crip_128k:1;
+		uint64_t crip_256k:1;
+		uint64_t q3fus:34;
+	} cn52xx;
+	struct cvmx_l2d_fus3_cn52xx cn52xxp1;
+	struct cvmx_l2d_fus3_cn56xx {
+		uint64_t reserved_40_63:24;
+		uint64_t ema_ctl:3;
+		uint64_t reserved_36_36:1;
+		uint64_t crip_512k:1;
+		uint64_t crip_1024k:1;
+		uint64_t q3fus:34;
+	} cn56xx;
+	struct cvmx_l2d_fus3_cn56xx cn56xxp1;
+	struct cvmx_l2d_fus3_cn58xx {
+		uint64_t reserved_39_63:25;
+		uint64_t ema_ctl:2;
+		uint64_t reserved_36_36:1;
+		uint64_t crip_512k:1;
+		uint64_t crip_1024k:1;
+		uint64_t q3fus:34;
+	} cn58xx;
+	struct cvmx_l2d_fus3_cn58xx cn58xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-l2t-defs.h b/arch/mips/include/asm/octeon/cvmx-l2t-defs.h
new file mode 100644
index 00000000000..2639a3f5ffc
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-l2t-defs.h
@@ -0,0 +1,141 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_L2T_DEFS_H__
+#define __CVMX_L2T_DEFS_H__
+
+#define CVMX_L2T_ERR \
+	 CVMX_ADD_IO_SEG(0x0001180080000008ull)
+
+union cvmx_l2t_err {
+	uint64_t u64;
+	struct cvmx_l2t_err_s {
+		uint64_t reserved_29_63:35;
+		uint64_t fadru:1;
+		uint64_t lck_intena2:1;
+		uint64_t lckerr2:1;
+		uint64_t lck_intena:1;
+		uint64_t lckerr:1;
+		uint64_t fset:3;
+		uint64_t fadr:10;
+		uint64_t fsyn:6;
+		uint64_t ded_err:1;
+		uint64_t sec_err:1;
+		uint64_t ded_intena:1;
+		uint64_t sec_intena:1;
+		uint64_t ecc_ena:1;
+	} s;
+	struct cvmx_l2t_err_cn30xx {
+		uint64_t reserved_28_63:36;
+		uint64_t lck_intena2:1;
+		uint64_t lckerr2:1;
+		uint64_t lck_intena:1;
+		uint64_t lckerr:1;
+		uint64_t reserved_23_23:1;
+		uint64_t fset:2;
+		uint64_t reserved_19_20:2;
+		uint64_t fadr:8;
+		uint64_t fsyn:6;
+		uint64_t ded_err:1;
+		uint64_t sec_err:1;
+		uint64_t ded_intena:1;
+		uint64_t sec_intena:1;
+		uint64_t ecc_ena:1;
+	} cn30xx;
+	struct cvmx_l2t_err_cn31xx {
+		uint64_t reserved_28_63:36;
+		uint64_t lck_intena2:1;
+		uint64_t lckerr2:1;
+		uint64_t lck_intena:1;
+		uint64_t lckerr:1;
+		uint64_t reserved_23_23:1;
+		uint64_t fset:2;
+		uint64_t reserved_20_20:1;
+		uint64_t fadr:9;
+		uint64_t fsyn:6;
+		uint64_t ded_err:1;
+		uint64_t sec_err:1;
+		uint64_t ded_intena:1;
+		uint64_t sec_intena:1;
+		uint64_t ecc_ena:1;
+	} cn31xx;
+	struct cvmx_l2t_err_cn38xx {
+		uint64_t reserved_28_63:36;
+		uint64_t lck_intena2:1;
+		uint64_t lckerr2:1;
+		uint64_t lck_intena:1;
+		uint64_t lckerr:1;
+		uint64_t fset:3;
+		uint64_t fadr:10;
+		uint64_t fsyn:6;
+		uint64_t ded_err:1;
+		uint64_t sec_err:1;
+		uint64_t ded_intena:1;
+		uint64_t sec_intena:1;
+		uint64_t ecc_ena:1;
+	} cn38xx;
+	struct cvmx_l2t_err_cn38xx cn38xxp2;
+	struct cvmx_l2t_err_cn50xx {
+		uint64_t reserved_28_63:36;
+		uint64_t lck_intena2:1;
+		uint64_t lckerr2:1;
+		uint64_t lck_intena:1;
+		uint64_t lckerr:1;
+		uint64_t fset:3;
+		uint64_t reserved_18_20:3;
+		uint64_t fadr:7;
+		uint64_t fsyn:6;
+		uint64_t ded_err:1;
+		uint64_t sec_err:1;
+		uint64_t ded_intena:1;
+		uint64_t sec_intena:1;
+		uint64_t ecc_ena:1;
+	} cn50xx;
+	struct cvmx_l2t_err_cn52xx {
+		uint64_t reserved_28_63:36;
+		uint64_t lck_intena2:1;
+		uint64_t lckerr2:1;
+		uint64_t lck_intena:1;
+		uint64_t lckerr:1;
+		uint64_t fset:3;
+		uint64_t reserved_20_20:1;
+		uint64_t fadr:9;
+		uint64_t fsyn:6;
+		uint64_t ded_err:1;
+		uint64_t sec_err:1;
+		uint64_t ded_intena:1;
+		uint64_t sec_intena:1;
+		uint64_t ecc_ena:1;
+	} cn52xx;
+	struct cvmx_l2t_err_cn52xx cn52xxp1;
+	struct cvmx_l2t_err_s cn56xx;
+	struct cvmx_l2t_err_s cn56xxp1;
+	struct cvmx_l2t_err_s cn58xx;
+	struct cvmx_l2t_err_s cn58xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-led-defs.h b/arch/mips/include/asm/octeon/cvmx-led-defs.h
new file mode 100644
index 00000000000..16f174a4dad
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-led-defs.h
@@ -0,0 +1,240 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_LED_DEFS_H__
+#define __CVMX_LED_DEFS_H__
+
+#define CVMX_LED_BLINK \
+	 CVMX_ADD_IO_SEG(0x0001180000001A48ull)
+#define CVMX_LED_CLK_PHASE \
+	 CVMX_ADD_IO_SEG(0x0001180000001A08ull)
+#define CVMX_LED_CYLON \
+	 CVMX_ADD_IO_SEG(0x0001180000001AF8ull)
+#define CVMX_LED_DBG \
+	 CVMX_ADD_IO_SEG(0x0001180000001A18ull)
+#define CVMX_LED_EN \
+	 CVMX_ADD_IO_SEG(0x0001180000001A00ull)
+#define CVMX_LED_POLARITY \
+	 CVMX_ADD_IO_SEG(0x0001180000001A50ull)
+#define CVMX_LED_PRT \
+	 CVMX_ADD_IO_SEG(0x0001180000001A10ull)
+#define CVMX_LED_PRT_FMT \
+	 CVMX_ADD_IO_SEG(0x0001180000001A30ull)
+#define CVMX_LED_PRT_STATUSX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001A80ull + (((offset) & 7) * 8))
+#define CVMX_LED_UDD_CNTX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001A20ull + (((offset) & 1) * 8))
+#define CVMX_LED_UDD_DATX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001A38ull + (((offset) & 1) * 8))
+#define CVMX_LED_UDD_DAT_CLRX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001AC8ull + (((offset) & 1) * 16))
+#define CVMX_LED_UDD_DAT_SETX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001AC0ull + (((offset) & 1) * 16))
+
+union cvmx_led_blink {
+	uint64_t u64;
+	struct cvmx_led_blink_s {
+		uint64_t reserved_8_63:56;
+		uint64_t rate:8;
+	} s;
+	struct cvmx_led_blink_s cn38xx;
+	struct cvmx_led_blink_s cn38xxp2;
+	struct cvmx_led_blink_s cn56xx;
+	struct cvmx_led_blink_s cn56xxp1;
+	struct cvmx_led_blink_s cn58xx;
+	struct cvmx_led_blink_s cn58xxp1;
+};
+
+union cvmx_led_clk_phase {
+	uint64_t u64;
+	struct cvmx_led_clk_phase_s {
+		uint64_t reserved_7_63:57;
+		uint64_t phase:7;
+	} s;
+	struct cvmx_led_clk_phase_s cn38xx;
+	struct cvmx_led_clk_phase_s cn38xxp2;
+	struct cvmx_led_clk_phase_s cn56xx;
+	struct cvmx_led_clk_phase_s cn56xxp1;
+	struct cvmx_led_clk_phase_s cn58xx;
+	struct cvmx_led_clk_phase_s cn58xxp1;
+};
+
+union cvmx_led_cylon {
+	uint64_t u64;
+	struct cvmx_led_cylon_s {
+		uint64_t reserved_16_63:48;
+		uint64_t rate:16;
+	} s;
+	struct cvmx_led_cylon_s cn38xx;
+	struct cvmx_led_cylon_s cn38xxp2;
+	struct cvmx_led_cylon_s cn56xx;
+	struct cvmx_led_cylon_s cn56xxp1;
+	struct cvmx_led_cylon_s cn58xx;
+	struct cvmx_led_cylon_s cn58xxp1;
+};
+
+union cvmx_led_dbg {
+	uint64_t u64;
+	struct cvmx_led_dbg_s {
+		uint64_t reserved_1_63:63;
+		uint64_t dbg_en:1;
+	} s;
+	struct cvmx_led_dbg_s cn38xx;
+	struct cvmx_led_dbg_s cn38xxp2;
+	struct cvmx_led_dbg_s cn56xx;
+	struct cvmx_led_dbg_s cn56xxp1;
+	struct cvmx_led_dbg_s cn58xx;
+	struct cvmx_led_dbg_s cn58xxp1;
+};
+
+union cvmx_led_en {
+	uint64_t u64;
+	struct cvmx_led_en_s {
+		uint64_t reserved_1_63:63;
+		uint64_t en:1;
+	} s;
+	struct cvmx_led_en_s cn38xx;
+	struct cvmx_led_en_s cn38xxp2;
+	struct cvmx_led_en_s cn56xx;
+	struct cvmx_led_en_s cn56xxp1;
+	struct cvmx_led_en_s cn58xx;
+	struct cvmx_led_en_s cn58xxp1;
+};
+
+union cvmx_led_polarity {
+	uint64_t u64;
+	struct cvmx_led_polarity_s {
+		uint64_t reserved_1_63:63;
+		uint64_t polarity:1;
+	} s;
+	struct cvmx_led_polarity_s cn38xx;
+	struct cvmx_led_polarity_s cn38xxp2;
+	struct cvmx_led_polarity_s cn56xx;
+	struct cvmx_led_polarity_s cn56xxp1;
+	struct cvmx_led_polarity_s cn58xx;
+	struct cvmx_led_polarity_s cn58xxp1;
+};
+
+union cvmx_led_prt {
+	uint64_t u64;
+	struct cvmx_led_prt_s {
+		uint64_t reserved_8_63:56;
+		uint64_t prt_en:8;
+	} s;
+	struct cvmx_led_prt_s cn38xx;
+	struct cvmx_led_prt_s cn38xxp2;
+	struct cvmx_led_prt_s cn56xx;
+	struct cvmx_led_prt_s cn56xxp1;
+	struct cvmx_led_prt_s cn58xx;
+	struct cvmx_led_prt_s cn58xxp1;
+};
+
+union cvmx_led_prt_fmt {
+	uint64_t u64;
+	struct cvmx_led_prt_fmt_s {
+		uint64_t reserved_4_63:60;
+		uint64_t format:4;
+	} s;
+	struct cvmx_led_prt_fmt_s cn38xx;
+	struct cvmx_led_prt_fmt_s cn38xxp2;
+	struct cvmx_led_prt_fmt_s cn56xx;
+	struct cvmx_led_prt_fmt_s cn56xxp1;
+	struct cvmx_led_prt_fmt_s cn58xx;
+	struct cvmx_led_prt_fmt_s cn58xxp1;
+};
+
+union cvmx_led_prt_statusx {
+	uint64_t u64;
+	struct cvmx_led_prt_statusx_s {
+		uint64_t reserved_6_63:58;
+		uint64_t status:6;
+	} s;
+	struct cvmx_led_prt_statusx_s cn38xx;
+	struct cvmx_led_prt_statusx_s cn38xxp2;
+	struct cvmx_led_prt_statusx_s cn56xx;
+	struct cvmx_led_prt_statusx_s cn56xxp1;
+	struct cvmx_led_prt_statusx_s cn58xx;
+	struct cvmx_led_prt_statusx_s cn58xxp1;
+};
+
+union cvmx_led_udd_cntx {
+	uint64_t u64;
+	struct cvmx_led_udd_cntx_s {
+		uint64_t reserved_6_63:58;
+		uint64_t cnt:6;
+	} s;
+	struct cvmx_led_udd_cntx_s cn38xx;
+	struct cvmx_led_udd_cntx_s cn38xxp2;
+	struct cvmx_led_udd_cntx_s cn56xx;
+	struct cvmx_led_udd_cntx_s cn56xxp1;
+	struct cvmx_led_udd_cntx_s cn58xx;
+	struct cvmx_led_udd_cntx_s cn58xxp1;
+};
+
+union cvmx_led_udd_datx {
+	uint64_t u64;
+	struct cvmx_led_udd_datx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t dat:32;
+	} s;
+	struct cvmx_led_udd_datx_s cn38xx;
+	struct cvmx_led_udd_datx_s cn38xxp2;
+	struct cvmx_led_udd_datx_s cn56xx;
+	struct cvmx_led_udd_datx_s cn56xxp1;
+	struct cvmx_led_udd_datx_s cn58xx;
+	struct cvmx_led_udd_datx_s cn58xxp1;
+};
+
+union cvmx_led_udd_dat_clrx {
+	uint64_t u64;
+	struct cvmx_led_udd_dat_clrx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t clr:32;
+	} s;
+	struct cvmx_led_udd_dat_clrx_s cn38xx;
+	struct cvmx_led_udd_dat_clrx_s cn38xxp2;
+	struct cvmx_led_udd_dat_clrx_s cn56xx;
+	struct cvmx_led_udd_dat_clrx_s cn56xxp1;
+	struct cvmx_led_udd_dat_clrx_s cn58xx;
+	struct cvmx_led_udd_dat_clrx_s cn58xxp1;
+};
+
+union cvmx_led_udd_dat_setx {
+	uint64_t u64;
+	struct cvmx_led_udd_dat_setx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t set:32;
+	} s;
+	struct cvmx_led_udd_dat_setx_s cn38xx;
+	struct cvmx_led_udd_dat_setx_s cn38xxp2;
+	struct cvmx_led_udd_dat_setx_s cn56xx;
+	struct cvmx_led_udd_dat_setx_s cn56xxp1;
+	struct cvmx_led_udd_dat_setx_s cn58xx;
+	struct cvmx_led_udd_dat_setx_s cn58xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-mio-defs.h b/arch/mips/include/asm/octeon/cvmx-mio-defs.h
new file mode 100644
index 00000000000..6555f053098
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-mio-defs.h
@@ -0,0 +1,2004 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_MIO_DEFS_H__
+#define __CVMX_MIO_DEFS_H__
+
+#define CVMX_MIO_BOOT_BIST_STAT \
+	 CVMX_ADD_IO_SEG(0x00011800000000F8ull)
+#define CVMX_MIO_BOOT_COMP \
+	 CVMX_ADD_IO_SEG(0x00011800000000B8ull)
+#define CVMX_MIO_BOOT_DMA_CFGX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000100ull + (((offset) & 3) * 8))
+#define CVMX_MIO_BOOT_DMA_INTX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000138ull + (((offset) & 3) * 8))
+#define CVMX_MIO_BOOT_DMA_INT_ENX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000150ull + (((offset) & 3) * 8))
+#define CVMX_MIO_BOOT_DMA_TIMX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000120ull + (((offset) & 3) * 8))
+#define CVMX_MIO_BOOT_ERR \
+	 CVMX_ADD_IO_SEG(0x00011800000000A0ull)
+#define CVMX_MIO_BOOT_INT \
+	 CVMX_ADD_IO_SEG(0x00011800000000A8ull)
+#define CVMX_MIO_BOOT_LOC_ADR \
+	 CVMX_ADD_IO_SEG(0x0001180000000090ull)
+#define CVMX_MIO_BOOT_LOC_CFGX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000080ull + (((offset) & 1) * 8))
+#define CVMX_MIO_BOOT_LOC_DAT \
+	 CVMX_ADD_IO_SEG(0x0001180000000098ull)
+#define CVMX_MIO_BOOT_PIN_DEFS \
+	 CVMX_ADD_IO_SEG(0x00011800000000C0ull)
+#define CVMX_MIO_BOOT_REG_CFGX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000000ull + (((offset) & 7) * 8))
+#define CVMX_MIO_BOOT_REG_TIMX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000040ull + (((offset) & 7) * 8))
+#define CVMX_MIO_BOOT_THR \
+	 CVMX_ADD_IO_SEG(0x00011800000000B0ull)
+#define CVMX_MIO_FUS_BNK_DATX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001520ull + (((offset) & 3) * 8))
+#define CVMX_MIO_FUS_DAT0 \
+	 CVMX_ADD_IO_SEG(0x0001180000001400ull)
+#define CVMX_MIO_FUS_DAT1 \
+	 CVMX_ADD_IO_SEG(0x0001180000001408ull)
+#define CVMX_MIO_FUS_DAT2 \
+	 CVMX_ADD_IO_SEG(0x0001180000001410ull)
+#define CVMX_MIO_FUS_DAT3 \
+	 CVMX_ADD_IO_SEG(0x0001180000001418ull)
+#define CVMX_MIO_FUS_EMA \
+	 CVMX_ADD_IO_SEG(0x0001180000001550ull)
+#define CVMX_MIO_FUS_PDF \
+	 CVMX_ADD_IO_SEG(0x0001180000001420ull)
+#define CVMX_MIO_FUS_PLL \
+	 CVMX_ADD_IO_SEG(0x0001180000001580ull)
+#define CVMX_MIO_FUS_PROG \
+	 CVMX_ADD_IO_SEG(0x0001180000001510ull)
+#define CVMX_MIO_FUS_PROG_TIMES \
+	 CVMX_ADD_IO_SEG(0x0001180000001518ull)
+#define CVMX_MIO_FUS_RCMD \
+	 CVMX_ADD_IO_SEG(0x0001180000001500ull)
+#define CVMX_MIO_FUS_SPR_REPAIR_RES \
+	 CVMX_ADD_IO_SEG(0x0001180000001548ull)
+#define CVMX_MIO_FUS_SPR_REPAIR_SUM \
+	 CVMX_ADD_IO_SEG(0x0001180000001540ull)
+#define CVMX_MIO_FUS_UNLOCK \
+	 CVMX_ADD_IO_SEG(0x0001180000001578ull)
+#define CVMX_MIO_FUS_WADR \
+	 CVMX_ADD_IO_SEG(0x0001180000001508ull)
+#define CVMX_MIO_NDF_DMA_CFG \
+	 CVMX_ADD_IO_SEG(0x0001180000000168ull)
+#define CVMX_MIO_NDF_DMA_INT \
+	 CVMX_ADD_IO_SEG(0x0001180000000170ull)
+#define CVMX_MIO_NDF_DMA_INT_EN \
+	 CVMX_ADD_IO_SEG(0x0001180000000178ull)
+#define CVMX_MIO_PLL_CTL \
+	 CVMX_ADD_IO_SEG(0x0001180000001448ull)
+#define CVMX_MIO_PLL_SETTING \
+	 CVMX_ADD_IO_SEG(0x0001180000001440ull)
+#define CVMX_MIO_TWSX_INT(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001010ull + (((offset) & 1) * 512))
+#define CVMX_MIO_TWSX_SW_TWSI(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001000ull + (((offset) & 1) * 512))
+#define CVMX_MIO_TWSX_SW_TWSI_EXT(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001018ull + (((offset) & 1) * 512))
+#define CVMX_MIO_TWSX_TWSI_SW(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000001008ull + (((offset) & 1) * 512))
+#define CVMX_MIO_UART2_DLH \
+	 CVMX_ADD_IO_SEG(0x0001180000000488ull)
+#define CVMX_MIO_UART2_DLL \
+	 CVMX_ADD_IO_SEG(0x0001180000000480ull)
+#define CVMX_MIO_UART2_FAR \
+	 CVMX_ADD_IO_SEG(0x0001180000000520ull)
+#define CVMX_MIO_UART2_FCR \
+	 CVMX_ADD_IO_SEG(0x0001180000000450ull)
+#define CVMX_MIO_UART2_HTX \
+	 CVMX_ADD_IO_SEG(0x0001180000000708ull)
+#define CVMX_MIO_UART2_IER \
+	 CVMX_ADD_IO_SEG(0x0001180000000408ull)
+#define CVMX_MIO_UART2_IIR \
+	 CVMX_ADD_IO_SEG(0x0001180000000410ull)
+#define CVMX_MIO_UART2_LCR \
+	 CVMX_ADD_IO_SEG(0x0001180000000418ull)
+#define CVMX_MIO_UART2_LSR \
+	 CVMX_ADD_IO_SEG(0x0001180000000428ull)
+#define CVMX_MIO_UART2_MCR \
+	 CVMX_ADD_IO_SEG(0x0001180000000420ull)
+#define CVMX_MIO_UART2_MSR \
+	 CVMX_ADD_IO_SEG(0x0001180000000430ull)
+#define CVMX_MIO_UART2_RBR \
+	 CVMX_ADD_IO_SEG(0x0001180000000400ull)
+#define CVMX_MIO_UART2_RFL \
+	 CVMX_ADD_IO_SEG(0x0001180000000608ull)
+#define CVMX_MIO_UART2_RFW \
+	 CVMX_ADD_IO_SEG(0x0001180000000530ull)
+#define CVMX_MIO_UART2_SBCR \
+	 CVMX_ADD_IO_SEG(0x0001180000000620ull)
+#define CVMX_MIO_UART2_SCR \
+	 CVMX_ADD_IO_SEG(0x0001180000000438ull)
+#define CVMX_MIO_UART2_SFE \
+	 CVMX_ADD_IO_SEG(0x0001180000000630ull)
+#define CVMX_MIO_UART2_SRR \
+	 CVMX_ADD_IO_SEG(0x0001180000000610ull)
+#define CVMX_MIO_UART2_SRT \
+	 CVMX_ADD_IO_SEG(0x0001180000000638ull)
+#define CVMX_MIO_UART2_SRTS \
+	 CVMX_ADD_IO_SEG(0x0001180000000618ull)
+#define CVMX_MIO_UART2_STT \
+	 CVMX_ADD_IO_SEG(0x0001180000000700ull)
+#define CVMX_MIO_UART2_TFL \
+	 CVMX_ADD_IO_SEG(0x0001180000000600ull)
+#define CVMX_MIO_UART2_TFR \
+	 CVMX_ADD_IO_SEG(0x0001180000000528ull)
+#define CVMX_MIO_UART2_THR \
+	 CVMX_ADD_IO_SEG(0x0001180000000440ull)
+#define CVMX_MIO_UART2_USR \
+	 CVMX_ADD_IO_SEG(0x0001180000000538ull)
+#define CVMX_MIO_UARTX_DLH(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000888ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_DLL(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000880ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_FAR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000920ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_FCR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000850ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_HTX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000B08ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_IER(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000808ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_IIR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000810ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_LCR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000818ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_LSR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000828ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_MCR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000820ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_MSR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000830ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_RBR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000800ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_RFL(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000A08ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_RFW(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000930ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_SBCR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000A20ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_SCR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000838ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_SFE(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000A30ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_SRR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000A10ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_SRT(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000A38ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_SRTS(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000A18ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_STT(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000B00ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_TFL(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000A00ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_TFR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000928ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_THR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000840ull + (((offset) & 1) * 1024))
+#define CVMX_MIO_UARTX_USR(offset) \
+	 CVMX_ADD_IO_SEG(0x0001180000000938ull + (((offset) & 1) * 1024))
+
+union cvmx_mio_boot_bist_stat {
+	uint64_t u64;
+	struct cvmx_mio_boot_bist_stat_s {
+		uint64_t reserved_2_63:62;
+		uint64_t loc:1;
+		uint64_t ncbi:1;
+	} s;
+	struct cvmx_mio_boot_bist_stat_cn30xx {
+		uint64_t reserved_4_63:60;
+		uint64_t ncbo_1:1;
+		uint64_t ncbo_0:1;
+		uint64_t loc:1;
+		uint64_t ncbi:1;
+	} cn30xx;
+	struct cvmx_mio_boot_bist_stat_cn30xx cn31xx;
+	struct cvmx_mio_boot_bist_stat_cn38xx {
+		uint64_t reserved_3_63:61;
+		uint64_t ncbo_0:1;
+		uint64_t loc:1;
+		uint64_t ncbi:1;
+	} cn38xx;
+	struct cvmx_mio_boot_bist_stat_cn38xx cn38xxp2;
+	struct cvmx_mio_boot_bist_stat_cn50xx {
+		uint64_t reserved_6_63:58;
+		uint64_t pcm_1:1;
+		uint64_t pcm_0:1;
+		uint64_t ncbo_1:1;
+		uint64_t ncbo_0:1;
+		uint64_t loc:1;
+		uint64_t ncbi:1;
+	} cn50xx;
+	struct cvmx_mio_boot_bist_stat_cn52xx {
+		uint64_t reserved_6_63:58;
+		uint64_t ndf:2;
+		uint64_t ncbo_0:1;
+		uint64_t dma:1;
+		uint64_t loc:1;
+		uint64_t ncbi:1;
+	} cn52xx;
+	struct cvmx_mio_boot_bist_stat_cn52xxp1 {
+		uint64_t reserved_4_63:60;
+		uint64_t ncbo_0:1;
+		uint64_t dma:1;
+		uint64_t loc:1;
+		uint64_t ncbi:1;
+	} cn52xxp1;
+	struct cvmx_mio_boot_bist_stat_cn52xxp1 cn56xx;
+	struct cvmx_mio_boot_bist_stat_cn52xxp1 cn56xxp1;
+	struct cvmx_mio_boot_bist_stat_cn38xx cn58xx;
+	struct cvmx_mio_boot_bist_stat_cn38xx cn58xxp1;
+};
+
+union cvmx_mio_boot_comp {
+	uint64_t u64;
+	struct cvmx_mio_boot_comp_s {
+		uint64_t reserved_10_63:54;
+		uint64_t pctl:5;
+		uint64_t nctl:5;
+	} s;
+	struct cvmx_mio_boot_comp_s cn50xx;
+	struct cvmx_mio_boot_comp_s cn52xx;
+	struct cvmx_mio_boot_comp_s cn52xxp1;
+	struct cvmx_mio_boot_comp_s cn56xx;
+	struct cvmx_mio_boot_comp_s cn56xxp1;
+};
+
+union cvmx_mio_boot_dma_cfgx {
+	uint64_t u64;
+	struct cvmx_mio_boot_dma_cfgx_s {
+		uint64_t en:1;
+		uint64_t rw:1;
+		uint64_t clr:1;
+		uint64_t reserved_60_60:1;
+		uint64_t swap32:1;
+		uint64_t swap16:1;
+		uint64_t swap8:1;
+		uint64_t endian:1;
+		uint64_t size:20;
+		uint64_t adr:36;
+	} s;
+	struct cvmx_mio_boot_dma_cfgx_s cn52xx;
+	struct cvmx_mio_boot_dma_cfgx_s cn52xxp1;
+	struct cvmx_mio_boot_dma_cfgx_s cn56xx;
+	struct cvmx_mio_boot_dma_cfgx_s cn56xxp1;
+};
+
+union cvmx_mio_boot_dma_intx {
+	uint64_t u64;
+	struct cvmx_mio_boot_dma_intx_s {
+		uint64_t reserved_2_63:62;
+		uint64_t dmarq:1;
+		uint64_t done:1;
+	} s;
+	struct cvmx_mio_boot_dma_intx_s cn52xx;
+	struct cvmx_mio_boot_dma_intx_s cn52xxp1;
+	struct cvmx_mio_boot_dma_intx_s cn56xx;
+	struct cvmx_mio_boot_dma_intx_s cn56xxp1;
+};
+
+union cvmx_mio_boot_dma_int_enx {
+	uint64_t u64;
+	struct cvmx_mio_boot_dma_int_enx_s {
+		uint64_t reserved_2_63:62;
+		uint64_t dmarq:1;
+		uint64_t done:1;
+	} s;
+	struct cvmx_mio_boot_dma_int_enx_s cn52xx;
+	struct cvmx_mio_boot_dma_int_enx_s cn52xxp1;
+	struct cvmx_mio_boot_dma_int_enx_s cn56xx;
+	struct cvmx_mio_boot_dma_int_enx_s cn56xxp1;
+};
+
+union cvmx_mio_boot_dma_timx {
+	uint64_t u64;
+	struct cvmx_mio_boot_dma_timx_s {
+		uint64_t dmack_pi:1;
+		uint64_t dmarq_pi:1;
+		uint64_t tim_mult:2;
+		uint64_t rd_dly:3;
+		uint64_t ddr:1;
+		uint64_t width:1;
+		uint64_t reserved_48_54:7;
+		uint64_t pause:6;
+		uint64_t dmack_h:6;
+		uint64_t we_n:6;
+		uint64_t we_a:6;
+		uint64_t oe_n:6;
+		uint64_t oe_a:6;
+		uint64_t dmack_s:6;
+		uint64_t dmarq:6;
+	} s;
+	struct cvmx_mio_boot_dma_timx_s cn52xx;
+	struct cvmx_mio_boot_dma_timx_s cn52xxp1;
+	struct cvmx_mio_boot_dma_timx_s cn56xx;
+	struct cvmx_mio_boot_dma_timx_s cn56xxp1;
+};
+
+union cvmx_mio_boot_err {
+	uint64_t u64;
+	struct cvmx_mio_boot_err_s {
+		uint64_t reserved_2_63:62;
+		uint64_t wait_err:1;
+		uint64_t adr_err:1;
+	} s;
+	struct cvmx_mio_boot_err_s cn30xx;
+	struct cvmx_mio_boot_err_s cn31xx;
+	struct cvmx_mio_boot_err_s cn38xx;
+	struct cvmx_mio_boot_err_s cn38xxp2;
+	struct cvmx_mio_boot_err_s cn50xx;
+	struct cvmx_mio_boot_err_s cn52xx;
+	struct cvmx_mio_boot_err_s cn52xxp1;
+	struct cvmx_mio_boot_err_s cn56xx;
+	struct cvmx_mio_boot_err_s cn56xxp1;
+	struct cvmx_mio_boot_err_s cn58xx;
+	struct cvmx_mio_boot_err_s cn58xxp1;
+};
+
+union cvmx_mio_boot_int {
+	uint64_t u64;
+	struct cvmx_mio_boot_int_s {
+		uint64_t reserved_2_63:62;
+		uint64_t wait_int:1;
+		uint64_t adr_int:1;
+	} s;
+	struct cvmx_mio_boot_int_s cn30xx;
+	struct cvmx_mio_boot_int_s cn31xx;
+	struct cvmx_mio_boot_int_s cn38xx;
+	struct cvmx_mio_boot_int_s cn38xxp2;
+	struct cvmx_mio_boot_int_s cn50xx;
+	struct cvmx_mio_boot_int_s cn52xx;
+	struct cvmx_mio_boot_int_s cn52xxp1;
+	struct cvmx_mio_boot_int_s cn56xx;
+	struct cvmx_mio_boot_int_s cn56xxp1;
+	struct cvmx_mio_boot_int_s cn58xx;
+	struct cvmx_mio_boot_int_s cn58xxp1;
+};
+
+union cvmx_mio_boot_loc_adr {
+	uint64_t u64;
+	struct cvmx_mio_boot_loc_adr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t adr:5;
+		uint64_t reserved_0_2:3;
+	} s;
+	struct cvmx_mio_boot_loc_adr_s cn30xx;
+	struct cvmx_mio_boot_loc_adr_s cn31xx;
+	struct cvmx_mio_boot_loc_adr_s cn38xx;
+	struct cvmx_mio_boot_loc_adr_s cn38xxp2;
+	struct cvmx_mio_boot_loc_adr_s cn50xx;
+	struct cvmx_mio_boot_loc_adr_s cn52xx;
+	struct cvmx_mio_boot_loc_adr_s cn52xxp1;
+	struct cvmx_mio_boot_loc_adr_s cn56xx;
+	struct cvmx_mio_boot_loc_adr_s cn56xxp1;
+	struct cvmx_mio_boot_loc_adr_s cn58xx;
+	struct cvmx_mio_boot_loc_adr_s cn58xxp1;
+};
+
+union cvmx_mio_boot_loc_cfgx {
+	uint64_t u64;
+	struct cvmx_mio_boot_loc_cfgx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t en:1;
+		uint64_t reserved_28_30:3;
+		uint64_t base:25;
+		uint64_t reserved_0_2:3;
+	} s;
+	struct cvmx_mio_boot_loc_cfgx_s cn30xx;
+	struct cvmx_mio_boot_loc_cfgx_s cn31xx;
+	struct cvmx_mio_boot_loc_cfgx_s cn38xx;
+	struct cvmx_mio_boot_loc_cfgx_s cn38xxp2;
+	struct cvmx_mio_boot_loc_cfgx_s cn50xx;
+	struct cvmx_mio_boot_loc_cfgx_s cn52xx;
+	struct cvmx_mio_boot_loc_cfgx_s cn52xxp1;
+	struct cvmx_mio_boot_loc_cfgx_s cn56xx;
+	struct cvmx_mio_boot_loc_cfgx_s cn56xxp1;
+	struct cvmx_mio_boot_loc_cfgx_s cn58xx;
+	struct cvmx_mio_boot_loc_cfgx_s cn58xxp1;
+};
+
+union cvmx_mio_boot_loc_dat {
+	uint64_t u64;
+	struct cvmx_mio_boot_loc_dat_s {
+		uint64_t data:64;
+	} s;
+	struct cvmx_mio_boot_loc_dat_s cn30xx;
+	struct cvmx_mio_boot_loc_dat_s cn31xx;
+	struct cvmx_mio_boot_loc_dat_s cn38xx;
+	struct cvmx_mio_boot_loc_dat_s cn38xxp2;
+	struct cvmx_mio_boot_loc_dat_s cn50xx;
+	struct cvmx_mio_boot_loc_dat_s cn52xx;
+	struct cvmx_mio_boot_loc_dat_s cn52xxp1;
+	struct cvmx_mio_boot_loc_dat_s cn56xx;
+	struct cvmx_mio_boot_loc_dat_s cn56xxp1;
+	struct cvmx_mio_boot_loc_dat_s cn58xx;
+	struct cvmx_mio_boot_loc_dat_s cn58xxp1;
+};
+
+union cvmx_mio_boot_pin_defs {
+	uint64_t u64;
+	struct cvmx_mio_boot_pin_defs_s {
+		uint64_t reserved_16_63:48;
+		uint64_t ale:1;
+		uint64_t width:1;
+		uint64_t dmack_p2:1;
+		uint64_t dmack_p1:1;
+		uint64_t dmack_p0:1;
+		uint64_t term:2;
+		uint64_t nand:1;
+		uint64_t reserved_0_7:8;
+	} s;
+	struct cvmx_mio_boot_pin_defs_cn52xx {
+		uint64_t reserved_16_63:48;
+		uint64_t ale:1;
+		uint64_t width:1;
+		uint64_t reserved_13_13:1;
+		uint64_t dmack_p1:1;
+		uint64_t dmack_p0:1;
+		uint64_t term:2;
+		uint64_t nand:1;
+		uint64_t reserved_0_7:8;
+	} cn52xx;
+	struct cvmx_mio_boot_pin_defs_cn56xx {
+		uint64_t reserved_16_63:48;
+		uint64_t ale:1;
+		uint64_t width:1;
+		uint64_t dmack_p2:1;
+		uint64_t dmack_p1:1;
+		uint64_t dmack_p0:1;
+		uint64_t term:2;
+		uint64_t reserved_0_8:9;
+	} cn56xx;
+};
+
+union cvmx_mio_boot_reg_cfgx {
+	uint64_t u64;
+	struct cvmx_mio_boot_reg_cfgx_s {
+		uint64_t reserved_44_63:20;
+		uint64_t dmack:2;
+		uint64_t tim_mult:2;
+		uint64_t rd_dly:3;
+		uint64_t sam:1;
+		uint64_t we_ext:2;
+		uint64_t oe_ext:2;
+		uint64_t en:1;
+		uint64_t orbit:1;
+		uint64_t ale:1;
+		uint64_t width:1;
+		uint64_t size:12;
+		uint64_t base:16;
+	} s;
+	struct cvmx_mio_boot_reg_cfgx_cn30xx {
+		uint64_t reserved_37_63:27;
+		uint64_t sam:1;
+		uint64_t we_ext:2;
+		uint64_t oe_ext:2;
+		uint64_t en:1;
+		uint64_t orbit:1;
+		uint64_t ale:1;
+		uint64_t width:1;
+		uint64_t size:12;
+		uint64_t base:16;
+	} cn30xx;
+	struct cvmx_mio_boot_reg_cfgx_cn30xx cn31xx;
+	struct cvmx_mio_boot_reg_cfgx_cn38xx {
+		uint64_t reserved_32_63:32;
+		uint64_t en:1;
+		uint64_t orbit:1;
+		uint64_t reserved_28_29:2;
+		uint64_t size:12;
+		uint64_t base:16;
+	} cn38xx;
+	struct cvmx_mio_boot_reg_cfgx_cn38xx cn38xxp2;
+	struct cvmx_mio_boot_reg_cfgx_cn50xx {
+		uint64_t reserved_42_63:22;
+		uint64_t tim_mult:2;
+		uint64_t rd_dly:3;
+		uint64_t sam:1;
+		uint64_t we_ext:2;
+		uint64_t oe_ext:2;
+		uint64_t en:1;
+		uint64_t orbit:1;
+		uint64_t ale:1;
+		uint64_t width:1;
+		uint64_t size:12;
+		uint64_t base:16;
+	} cn50xx;
+	struct cvmx_mio_boot_reg_cfgx_s cn52xx;
+	struct cvmx_mio_boot_reg_cfgx_s cn52xxp1;
+	struct cvmx_mio_boot_reg_cfgx_s cn56xx;
+	struct cvmx_mio_boot_reg_cfgx_s cn56xxp1;
+	struct cvmx_mio_boot_reg_cfgx_cn30xx cn58xx;
+	struct cvmx_mio_boot_reg_cfgx_cn30xx cn58xxp1;
+};
+
+union cvmx_mio_boot_reg_timx {
+	uint64_t u64;
+	struct cvmx_mio_boot_reg_timx_s {
+		uint64_t pagem:1;
+		uint64_t waitm:1;
+		uint64_t pages:2;
+		uint64_t ale:6;
+		uint64_t page:6;
+		uint64_t wait:6;
+		uint64_t pause:6;
+		uint64_t wr_hld:6;
+		uint64_t rd_hld:6;
+		uint64_t we:6;
+		uint64_t oe:6;
+		uint64_t ce:6;
+		uint64_t adr:6;
+	} s;
+	struct cvmx_mio_boot_reg_timx_s cn30xx;
+	struct cvmx_mio_boot_reg_timx_s cn31xx;
+	struct cvmx_mio_boot_reg_timx_cn38xx {
+		uint64_t pagem:1;
+		uint64_t waitm:1;
+		uint64_t pages:2;
+		uint64_t reserved_54_59:6;
+		uint64_t page:6;
+		uint64_t wait:6;
+		uint64_t pause:6;
+		uint64_t wr_hld:6;
+		uint64_t rd_hld:6;
+		uint64_t we:6;
+		uint64_t oe:6;
+		uint64_t ce:6;
+		uint64_t adr:6;
+	} cn38xx;
+	struct cvmx_mio_boot_reg_timx_cn38xx cn38xxp2;
+	struct cvmx_mio_boot_reg_timx_s cn50xx;
+	struct cvmx_mio_boot_reg_timx_s cn52xx;
+	struct cvmx_mio_boot_reg_timx_s cn52xxp1;
+	struct cvmx_mio_boot_reg_timx_s cn56xx;
+	struct cvmx_mio_boot_reg_timx_s cn56xxp1;
+	struct cvmx_mio_boot_reg_timx_s cn58xx;
+	struct cvmx_mio_boot_reg_timx_s cn58xxp1;
+};
+
+union cvmx_mio_boot_thr {
+	uint64_t u64;
+	struct cvmx_mio_boot_thr_s {
+		uint64_t reserved_22_63:42;
+		uint64_t dma_thr:6;
+		uint64_t reserved_14_15:2;
+		uint64_t fif_cnt:6;
+		uint64_t reserved_6_7:2;
+		uint64_t fif_thr:6;
+	} s;
+	struct cvmx_mio_boot_thr_cn30xx {
+		uint64_t reserved_14_63:50;
+		uint64_t fif_cnt:6;
+		uint64_t reserved_6_7:2;
+		uint64_t fif_thr:6;
+	} cn30xx;
+	struct cvmx_mio_boot_thr_cn30xx cn31xx;
+	struct cvmx_mio_boot_thr_cn30xx cn38xx;
+	struct cvmx_mio_boot_thr_cn30xx cn38xxp2;
+	struct cvmx_mio_boot_thr_cn30xx cn50xx;
+	struct cvmx_mio_boot_thr_s cn52xx;
+	struct cvmx_mio_boot_thr_s cn52xxp1;
+	struct cvmx_mio_boot_thr_s cn56xx;
+	struct cvmx_mio_boot_thr_s cn56xxp1;
+	struct cvmx_mio_boot_thr_cn30xx cn58xx;
+	struct cvmx_mio_boot_thr_cn30xx cn58xxp1;
+};
+
+union cvmx_mio_fus_bnk_datx {
+	uint64_t u64;
+	struct cvmx_mio_fus_bnk_datx_s {
+		uint64_t dat:64;
+	} s;
+	struct cvmx_mio_fus_bnk_datx_s cn50xx;
+	struct cvmx_mio_fus_bnk_datx_s cn52xx;
+	struct cvmx_mio_fus_bnk_datx_s cn52xxp1;
+	struct cvmx_mio_fus_bnk_datx_s cn56xx;
+	struct cvmx_mio_fus_bnk_datx_s cn56xxp1;
+	struct cvmx_mio_fus_bnk_datx_s cn58xx;
+	struct cvmx_mio_fus_bnk_datx_s cn58xxp1;
+};
+
+union cvmx_mio_fus_dat0 {
+	uint64_t u64;
+	struct cvmx_mio_fus_dat0_s {
+		uint64_t reserved_32_63:32;
+		uint64_t man_info:32;
+	} s;
+	struct cvmx_mio_fus_dat0_s cn30xx;
+	struct cvmx_mio_fus_dat0_s cn31xx;
+	struct cvmx_mio_fus_dat0_s cn38xx;
+	struct cvmx_mio_fus_dat0_s cn38xxp2;
+	struct cvmx_mio_fus_dat0_s cn50xx;
+	struct cvmx_mio_fus_dat0_s cn52xx;
+	struct cvmx_mio_fus_dat0_s cn52xxp1;
+	struct cvmx_mio_fus_dat0_s cn56xx;
+	struct cvmx_mio_fus_dat0_s cn56xxp1;
+	struct cvmx_mio_fus_dat0_s cn58xx;
+	struct cvmx_mio_fus_dat0_s cn58xxp1;
+};
+
+union cvmx_mio_fus_dat1 {
+	uint64_t u64;
+	struct cvmx_mio_fus_dat1_s {
+		uint64_t reserved_32_63:32;
+		uint64_t man_info:32;
+	} s;
+	struct cvmx_mio_fus_dat1_s cn30xx;
+	struct cvmx_mio_fus_dat1_s cn31xx;
+	struct cvmx_mio_fus_dat1_s cn38xx;
+	struct cvmx_mio_fus_dat1_s cn38xxp2;
+	struct cvmx_mio_fus_dat1_s cn50xx;
+	struct cvmx_mio_fus_dat1_s cn52xx;
+	struct cvmx_mio_fus_dat1_s cn52xxp1;
+	struct cvmx_mio_fus_dat1_s cn56xx;
+	struct cvmx_mio_fus_dat1_s cn56xxp1;
+	struct cvmx_mio_fus_dat1_s cn58xx;
+	struct cvmx_mio_fus_dat1_s cn58xxp1;
+};
+
+union cvmx_mio_fus_dat2 {
+	uint64_t u64;
+	struct cvmx_mio_fus_dat2_s {
+		uint64_t reserved_34_63:30;
+		uint64_t fus318:1;
+		uint64_t raid_en:1;
+		uint64_t reserved_30_31:2;
+		uint64_t nokasu:1;
+		uint64_t nodfa_cp2:1;
+		uint64_t nomul:1;
+		uint64_t nocrypto:1;
+		uint64_t rst_sht:1;
+		uint64_t bist_dis:1;
+		uint64_t chip_id:8;
+		uint64_t reserved_0_15:16;
+	} s;
+	struct cvmx_mio_fus_dat2_cn30xx {
+		uint64_t reserved_29_63:35;
+		uint64_t nodfa_cp2:1;
+		uint64_t nomul:1;
+		uint64_t nocrypto:1;
+		uint64_t rst_sht:1;
+		uint64_t bist_dis:1;
+		uint64_t chip_id:8;
+		uint64_t pll_off:4;
+		uint64_t reserved_1_11:11;
+		uint64_t pp_dis:1;
+	} cn30xx;
+	struct cvmx_mio_fus_dat2_cn31xx {
+		uint64_t reserved_29_63:35;
+		uint64_t nodfa_cp2:1;
+		uint64_t nomul:1;
+		uint64_t nocrypto:1;
+		uint64_t rst_sht:1;
+		uint64_t bist_dis:1;
+		uint64_t chip_id:8;
+		uint64_t pll_off:4;
+		uint64_t reserved_2_11:10;
+		uint64_t pp_dis:2;
+	} cn31xx;
+	struct cvmx_mio_fus_dat2_cn38xx {
+		uint64_t reserved_29_63:35;
+		uint64_t nodfa_cp2:1;
+		uint64_t nomul:1;
+		uint64_t nocrypto:1;
+		uint64_t rst_sht:1;
+		uint64_t bist_dis:1;
+		uint64_t chip_id:8;
+		uint64_t pp_dis:16;
+	} cn38xx;
+	struct cvmx_mio_fus_dat2_cn38xx cn38xxp2;
+	struct cvmx_mio_fus_dat2_cn50xx {
+		uint64_t reserved_34_63:30;
+		uint64_t fus318:1;
+		uint64_t raid_en:1;
+		uint64_t reserved_30_31:2;
+		uint64_t nokasu:1;
+		uint64_t nodfa_cp2:1;
+		uint64_t nomul:1;
+		uint64_t nocrypto:1;
+		uint64_t rst_sht:1;
+		uint64_t bist_dis:1;
+		uint64_t chip_id:8;
+		uint64_t reserved_2_15:14;
+		uint64_t pp_dis:2;
+	} cn50xx;
+	struct cvmx_mio_fus_dat2_cn52xx {
+		uint64_t reserved_34_63:30;
+		uint64_t fus318:1;
+		uint64_t raid_en:1;
+		uint64_t reserved_30_31:2;
+		uint64_t nokasu:1;
+		uint64_t nodfa_cp2:1;
+		uint64_t nomul:1;
+		uint64_t nocrypto:1;
+		uint64_t rst_sht:1;
+		uint64_t bist_dis:1;
+		uint64_t chip_id:8;
+		uint64_t reserved_4_15:12;
+		uint64_t pp_dis:4;
+	} cn52xx;
+	struct cvmx_mio_fus_dat2_cn52xx cn52xxp1;
+	struct cvmx_mio_fus_dat2_cn56xx {
+		uint64_t reserved_34_63:30;
+		uint64_t fus318:1;
+		uint64_t raid_en:1;
+		uint64_t reserved_30_31:2;
+		uint64_t nokasu:1;
+		uint64_t nodfa_cp2:1;
+		uint64_t nomul:1;
+		uint64_t nocrypto:1;
+		uint64_t rst_sht:1;
+		uint64_t bist_dis:1;
+		uint64_t chip_id:8;
+		uint64_t reserved_12_15:4;
+		uint64_t pp_dis:12;
+	} cn56xx;
+	struct cvmx_mio_fus_dat2_cn56xx cn56xxp1;
+	struct cvmx_mio_fus_dat2_cn58xx {
+		uint64_t reserved_30_63:34;
+		uint64_t nokasu:1;
+		uint64_t nodfa_cp2:1;
+		uint64_t nomul:1;
+		uint64_t nocrypto:1;
+		uint64_t rst_sht:1;
+		uint64_t bist_dis:1;
+		uint64_t chip_id:8;
+		uint64_t pp_dis:16;
+	} cn58xx;
+	struct cvmx_mio_fus_dat2_cn58xx cn58xxp1;
+};
+
+union cvmx_mio_fus_dat3 {
+	uint64_t u64;
+	struct cvmx_mio_fus_dat3_s {
+		uint64_t reserved_32_63:32;
+		uint64_t pll_div4:1;
+		uint64_t zip_crip:2;
+		uint64_t bar2_en:1;
+		uint64_t efus_lck:1;
+		uint64_t efus_ign:1;
+		uint64_t nozip:1;
+		uint64_t nodfa_dte:1;
+		uint64_t icache:24;
+	} s;
+	struct cvmx_mio_fus_dat3_cn30xx {
+		uint64_t reserved_32_63:32;
+		uint64_t pll_div4:1;
+		uint64_t reserved_29_30:2;
+		uint64_t bar2_en:1;
+		uint64_t efus_lck:1;
+		uint64_t efus_ign:1;
+		uint64_t nozip:1;
+		uint64_t nodfa_dte:1;
+		uint64_t icache:24;
+	} cn30xx;
+	struct cvmx_mio_fus_dat3_s cn31xx;
+	struct cvmx_mio_fus_dat3_cn38xx {
+		uint64_t reserved_31_63:33;
+		uint64_t zip_crip:2;
+		uint64_t bar2_en:1;
+		uint64_t efus_lck:1;
+		uint64_t efus_ign:1;
+		uint64_t nozip:1;
+		uint64_t nodfa_dte:1;
+		uint64_t icache:24;
+	} cn38xx;
+	struct cvmx_mio_fus_dat3_cn38xxp2 {
+		uint64_t reserved_29_63:35;
+		uint64_t bar2_en:1;
+		uint64_t efus_lck:1;
+		uint64_t efus_ign:1;
+		uint64_t nozip:1;
+		uint64_t nodfa_dte:1;
+		uint64_t icache:24;
+	} cn38xxp2;
+	struct cvmx_mio_fus_dat3_cn38xx cn50xx;
+	struct cvmx_mio_fus_dat3_cn38xx cn52xx;
+	struct cvmx_mio_fus_dat3_cn38xx cn52xxp1;
+	struct cvmx_mio_fus_dat3_cn38xx cn56xx;
+	struct cvmx_mio_fus_dat3_cn38xx cn56xxp1;
+	struct cvmx_mio_fus_dat3_cn38xx cn58xx;
+	struct cvmx_mio_fus_dat3_cn38xx cn58xxp1;
+};
+
+union cvmx_mio_fus_ema {
+	uint64_t u64;
+	struct cvmx_mio_fus_ema_s {
+		uint64_t reserved_7_63:57;
+		uint64_t eff_ema:3;
+		uint64_t reserved_3_3:1;
+		uint64_t ema:3;
+	} s;
+	struct cvmx_mio_fus_ema_s cn50xx;
+	struct cvmx_mio_fus_ema_s cn52xx;
+	struct cvmx_mio_fus_ema_s cn52xxp1;
+	struct cvmx_mio_fus_ema_s cn56xx;
+	struct cvmx_mio_fus_ema_s cn56xxp1;
+	struct cvmx_mio_fus_ema_cn58xx {
+		uint64_t reserved_2_63:62;
+		uint64_t ema:2;
+	} cn58xx;
+	struct cvmx_mio_fus_ema_cn58xx cn58xxp1;
+};
+
+union cvmx_mio_fus_pdf {
+	uint64_t u64;
+	struct cvmx_mio_fus_pdf_s {
+		uint64_t pdf:64;
+	} s;
+	struct cvmx_mio_fus_pdf_s cn50xx;
+	struct cvmx_mio_fus_pdf_s cn52xx;
+	struct cvmx_mio_fus_pdf_s cn52xxp1;
+	struct cvmx_mio_fus_pdf_s cn56xx;
+	struct cvmx_mio_fus_pdf_s cn56xxp1;
+	struct cvmx_mio_fus_pdf_s cn58xx;
+};
+
+union cvmx_mio_fus_pll {
+	uint64_t u64;
+	struct cvmx_mio_fus_pll_s {
+		uint64_t reserved_2_63:62;
+		uint64_t rfslip:1;
+		uint64_t fbslip:1;
+	} s;
+	struct cvmx_mio_fus_pll_s cn50xx;
+	struct cvmx_mio_fus_pll_s cn52xx;
+	struct cvmx_mio_fus_pll_s cn52xxp1;
+	struct cvmx_mio_fus_pll_s cn56xx;
+	struct cvmx_mio_fus_pll_s cn56xxp1;
+	struct cvmx_mio_fus_pll_s cn58xx;
+	struct cvmx_mio_fus_pll_s cn58xxp1;
+};
+
+union cvmx_mio_fus_prog {
+	uint64_t u64;
+	struct cvmx_mio_fus_prog_s {
+		uint64_t reserved_1_63:63;
+		uint64_t prog:1;
+	} s;
+	struct cvmx_mio_fus_prog_s cn30xx;
+	struct cvmx_mio_fus_prog_s cn31xx;
+	struct cvmx_mio_fus_prog_s cn38xx;
+	struct cvmx_mio_fus_prog_s cn38xxp2;
+	struct cvmx_mio_fus_prog_s cn50xx;
+	struct cvmx_mio_fus_prog_s cn52xx;
+	struct cvmx_mio_fus_prog_s cn52xxp1;
+	struct cvmx_mio_fus_prog_s cn56xx;
+	struct cvmx_mio_fus_prog_s cn56xxp1;
+	struct cvmx_mio_fus_prog_s cn58xx;
+	struct cvmx_mio_fus_prog_s cn58xxp1;
+};
+
+union cvmx_mio_fus_prog_times {
+	uint64_t u64;
+	struct cvmx_mio_fus_prog_times_s {
+		uint64_t reserved_33_63:31;
+		uint64_t prog_pin:1;
+		uint64_t out:8;
+		uint64_t sclk_lo:4;
+		uint64_t sclk_hi:12;
+		uint64_t setup:8;
+	} s;
+	struct cvmx_mio_fus_prog_times_s cn50xx;
+	struct cvmx_mio_fus_prog_times_s cn52xx;
+	struct cvmx_mio_fus_prog_times_s cn52xxp1;
+	struct cvmx_mio_fus_prog_times_s cn56xx;
+	struct cvmx_mio_fus_prog_times_s cn56xxp1;
+	struct cvmx_mio_fus_prog_times_s cn58xx;
+	struct cvmx_mio_fus_prog_times_s cn58xxp1;
+};
+
+union cvmx_mio_fus_rcmd {
+	uint64_t u64;
+	struct cvmx_mio_fus_rcmd_s {
+		uint64_t reserved_24_63:40;
+		uint64_t dat:8;
+		uint64_t reserved_13_15:3;
+		uint64_t pend:1;
+		uint64_t reserved_9_11:3;
+		uint64_t efuse:1;
+		uint64_t addr:8;
+	} s;
+	struct cvmx_mio_fus_rcmd_cn30xx {
+		uint64_t reserved_24_63:40;
+		uint64_t dat:8;
+		uint64_t reserved_13_15:3;
+		uint64_t pend:1;
+		uint64_t reserved_9_11:3;
+		uint64_t efuse:1;
+		uint64_t reserved_7_7:1;
+		uint64_t addr:7;
+	} cn30xx;
+	struct cvmx_mio_fus_rcmd_cn30xx cn31xx;
+	struct cvmx_mio_fus_rcmd_cn30xx cn38xx;
+	struct cvmx_mio_fus_rcmd_cn30xx cn38xxp2;
+	struct cvmx_mio_fus_rcmd_cn30xx cn50xx;
+	struct cvmx_mio_fus_rcmd_s cn52xx;
+	struct cvmx_mio_fus_rcmd_s cn52xxp1;
+	struct cvmx_mio_fus_rcmd_s cn56xx;
+	struct cvmx_mio_fus_rcmd_s cn56xxp1;
+	struct cvmx_mio_fus_rcmd_cn30xx cn58xx;
+	struct cvmx_mio_fus_rcmd_cn30xx cn58xxp1;
+};
+
+union cvmx_mio_fus_spr_repair_res {
+	uint64_t u64;
+	struct cvmx_mio_fus_spr_repair_res_s {
+		uint64_t reserved_42_63:22;
+		uint64_t repair2:14;
+		uint64_t repair1:14;
+		uint64_t repair0:14;
+	} s;
+	struct cvmx_mio_fus_spr_repair_res_s cn30xx;
+	struct cvmx_mio_fus_spr_repair_res_s cn31xx;
+	struct cvmx_mio_fus_spr_repair_res_s cn38xx;
+	struct cvmx_mio_fus_spr_repair_res_s cn50xx;
+	struct cvmx_mio_fus_spr_repair_res_s cn52xx;
+	struct cvmx_mio_fus_spr_repair_res_s cn52xxp1;
+	struct cvmx_mio_fus_spr_repair_res_s cn56xx;
+	struct cvmx_mio_fus_spr_repair_res_s cn56xxp1;
+	struct cvmx_mio_fus_spr_repair_res_s cn58xx;
+	struct cvmx_mio_fus_spr_repair_res_s cn58xxp1;
+};
+
+union cvmx_mio_fus_spr_repair_sum {
+	uint64_t u64;
+	struct cvmx_mio_fus_spr_repair_sum_s {
+		uint64_t reserved_1_63:63;
+		uint64_t too_many:1;
+	} s;
+	struct cvmx_mio_fus_spr_repair_sum_s cn30xx;
+	struct cvmx_mio_fus_spr_repair_sum_s cn31xx;
+	struct cvmx_mio_fus_spr_repair_sum_s cn38xx;
+	struct cvmx_mio_fus_spr_repair_sum_s cn50xx;
+	struct cvmx_mio_fus_spr_repair_sum_s cn52xx;
+	struct cvmx_mio_fus_spr_repair_sum_s cn52xxp1;
+	struct cvmx_mio_fus_spr_repair_sum_s cn56xx;
+	struct cvmx_mio_fus_spr_repair_sum_s cn56xxp1;
+	struct cvmx_mio_fus_spr_repair_sum_s cn58xx;
+	struct cvmx_mio_fus_spr_repair_sum_s cn58xxp1;
+};
+
+union cvmx_mio_fus_unlock {
+	uint64_t u64;
+	struct cvmx_mio_fus_unlock_s {
+		uint64_t reserved_24_63:40;
+		uint64_t key:24;
+	} s;
+	struct cvmx_mio_fus_unlock_s cn30xx;
+	struct cvmx_mio_fus_unlock_s cn31xx;
+};
+
+union cvmx_mio_fus_wadr {
+	uint64_t u64;
+	struct cvmx_mio_fus_wadr_s {
+		uint64_t reserved_10_63:54;
+		uint64_t addr:10;
+	} s;
+	struct cvmx_mio_fus_wadr_s cn30xx;
+	struct cvmx_mio_fus_wadr_s cn31xx;
+	struct cvmx_mio_fus_wadr_s cn38xx;
+	struct cvmx_mio_fus_wadr_s cn38xxp2;
+	struct cvmx_mio_fus_wadr_cn50xx {
+		uint64_t reserved_2_63:62;
+		uint64_t addr:2;
+	} cn50xx;
+	struct cvmx_mio_fus_wadr_cn52xx {
+		uint64_t reserved_3_63:61;
+		uint64_t addr:3;
+	} cn52xx;
+	struct cvmx_mio_fus_wadr_cn52xx cn52xxp1;
+	struct cvmx_mio_fus_wadr_cn52xx cn56xx;
+	struct cvmx_mio_fus_wadr_cn52xx cn56xxp1;
+	struct cvmx_mio_fus_wadr_cn50xx cn58xx;
+	struct cvmx_mio_fus_wadr_cn50xx cn58xxp1;
+};
+
+union cvmx_mio_ndf_dma_cfg {
+	uint64_t u64;
+	struct cvmx_mio_ndf_dma_cfg_s {
+		uint64_t en:1;
+		uint64_t rw:1;
+		uint64_t clr:1;
+		uint64_t reserved_60_60:1;
+		uint64_t swap32:1;
+		uint64_t swap16:1;
+		uint64_t swap8:1;
+		uint64_t endian:1;
+		uint64_t size:20;
+		uint64_t adr:36;
+	} s;
+	struct cvmx_mio_ndf_dma_cfg_s cn52xx;
+};
+
+union cvmx_mio_ndf_dma_int {
+	uint64_t u64;
+	struct cvmx_mio_ndf_dma_int_s {
+		uint64_t reserved_1_63:63;
+		uint64_t done:1;
+	} s;
+	struct cvmx_mio_ndf_dma_int_s cn52xx;
+};
+
+union cvmx_mio_ndf_dma_int_en {
+	uint64_t u64;
+	struct cvmx_mio_ndf_dma_int_en_s {
+		uint64_t reserved_1_63:63;
+		uint64_t done:1;
+	} s;
+	struct cvmx_mio_ndf_dma_int_en_s cn52xx;
+};
+
+union cvmx_mio_pll_ctl {
+	uint64_t u64;
+	struct cvmx_mio_pll_ctl_s {
+		uint64_t reserved_5_63:59;
+		uint64_t bw_ctl:5;
+	} s;
+	struct cvmx_mio_pll_ctl_s cn30xx;
+	struct cvmx_mio_pll_ctl_s cn31xx;
+};
+
+union cvmx_mio_pll_setting {
+	uint64_t u64;
+	struct cvmx_mio_pll_setting_s {
+		uint64_t reserved_17_63:47;
+		uint64_t setting:17;
+	} s;
+	struct cvmx_mio_pll_setting_s cn30xx;
+	struct cvmx_mio_pll_setting_s cn31xx;
+};
+
+union cvmx_mio_twsx_int {
+	uint64_t u64;
+	struct cvmx_mio_twsx_int_s {
+		uint64_t reserved_12_63:52;
+		uint64_t scl:1;
+		uint64_t sda:1;
+		uint64_t scl_ovr:1;
+		uint64_t sda_ovr:1;
+		uint64_t reserved_7_7:1;
+		uint64_t core_en:1;
+		uint64_t ts_en:1;
+		uint64_t st_en:1;
+		uint64_t reserved_3_3:1;
+		uint64_t core_int:1;
+		uint64_t ts_int:1;
+		uint64_t st_int:1;
+	} s;
+	struct cvmx_mio_twsx_int_s cn30xx;
+	struct cvmx_mio_twsx_int_s cn31xx;
+	struct cvmx_mio_twsx_int_s cn38xx;
+	struct cvmx_mio_twsx_int_cn38xxp2 {
+		uint64_t reserved_7_63:57;
+		uint64_t core_en:1;
+		uint64_t ts_en:1;
+		uint64_t st_en:1;
+		uint64_t reserved_3_3:1;
+		uint64_t core_int:1;
+		uint64_t ts_int:1;
+		uint64_t st_int:1;
+	} cn38xxp2;
+	struct cvmx_mio_twsx_int_s cn50xx;
+	struct cvmx_mio_twsx_int_s cn52xx;
+	struct cvmx_mio_twsx_int_s cn52xxp1;
+	struct cvmx_mio_twsx_int_s cn56xx;
+	struct cvmx_mio_twsx_int_s cn56xxp1;
+	struct cvmx_mio_twsx_int_s cn58xx;
+	struct cvmx_mio_twsx_int_s cn58xxp1;
+};
+
+union cvmx_mio_twsx_sw_twsi {
+	uint64_t u64;
+	struct cvmx_mio_twsx_sw_twsi_s {
+		uint64_t v:1;
+		uint64_t slonly:1;
+		uint64_t eia:1;
+		uint64_t op:4;
+		uint64_t r:1;
+		uint64_t sovr:1;
+		uint64_t size:3;
+		uint64_t scr:2;
+		uint64_t a:10;
+		uint64_t ia:5;
+		uint64_t eop_ia:3;
+		uint64_t d:32;
+	} s;
+	struct cvmx_mio_twsx_sw_twsi_s cn30xx;
+	struct cvmx_mio_twsx_sw_twsi_s cn31xx;
+	struct cvmx_mio_twsx_sw_twsi_s cn38xx;
+	struct cvmx_mio_twsx_sw_twsi_s cn38xxp2;
+	struct cvmx_mio_twsx_sw_twsi_s cn50xx;
+	struct cvmx_mio_twsx_sw_twsi_s cn52xx;
+	struct cvmx_mio_twsx_sw_twsi_s cn52xxp1;
+	struct cvmx_mio_twsx_sw_twsi_s cn56xx;
+	struct cvmx_mio_twsx_sw_twsi_s cn56xxp1;
+	struct cvmx_mio_twsx_sw_twsi_s cn58xx;
+	struct cvmx_mio_twsx_sw_twsi_s cn58xxp1;
+};
+
+union cvmx_mio_twsx_sw_twsi_ext {
+	uint64_t u64;
+	struct cvmx_mio_twsx_sw_twsi_ext_s {
+		uint64_t reserved_40_63:24;
+		uint64_t ia:8;
+		uint64_t d:32;
+	} s;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn30xx;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn31xx;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn38xx;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn38xxp2;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn50xx;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn52xx;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn52xxp1;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn56xx;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn56xxp1;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn58xx;
+	struct cvmx_mio_twsx_sw_twsi_ext_s cn58xxp1;
+};
+
+union cvmx_mio_twsx_twsi_sw {
+	uint64_t u64;
+	struct cvmx_mio_twsx_twsi_sw_s {
+		uint64_t v:2;
+		uint64_t reserved_32_61:30;
+		uint64_t d:32;
+	} s;
+	struct cvmx_mio_twsx_twsi_sw_s cn30xx;
+	struct cvmx_mio_twsx_twsi_sw_s cn31xx;
+	struct cvmx_mio_twsx_twsi_sw_s cn38xx;
+	struct cvmx_mio_twsx_twsi_sw_s cn38xxp2;
+	struct cvmx_mio_twsx_twsi_sw_s cn50xx;
+	struct cvmx_mio_twsx_twsi_sw_s cn52xx;
+	struct cvmx_mio_twsx_twsi_sw_s cn52xxp1;
+	struct cvmx_mio_twsx_twsi_sw_s cn56xx;
+	struct cvmx_mio_twsx_twsi_sw_s cn56xxp1;
+	struct cvmx_mio_twsx_twsi_sw_s cn58xx;
+	struct cvmx_mio_twsx_twsi_sw_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_dlh {
+	uint64_t u64;
+	struct cvmx_mio_uartx_dlh_s {
+		uint64_t reserved_8_63:56;
+		uint64_t dlh:8;
+	} s;
+	struct cvmx_mio_uartx_dlh_s cn30xx;
+	struct cvmx_mio_uartx_dlh_s cn31xx;
+	struct cvmx_mio_uartx_dlh_s cn38xx;
+	struct cvmx_mio_uartx_dlh_s cn38xxp2;
+	struct cvmx_mio_uartx_dlh_s cn50xx;
+	struct cvmx_mio_uartx_dlh_s cn52xx;
+	struct cvmx_mio_uartx_dlh_s cn52xxp1;
+	struct cvmx_mio_uartx_dlh_s cn56xx;
+	struct cvmx_mio_uartx_dlh_s cn56xxp1;
+	struct cvmx_mio_uartx_dlh_s cn58xx;
+	struct cvmx_mio_uartx_dlh_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_dll {
+	uint64_t u64;
+	struct cvmx_mio_uartx_dll_s {
+		uint64_t reserved_8_63:56;
+		uint64_t dll:8;
+	} s;
+	struct cvmx_mio_uartx_dll_s cn30xx;
+	struct cvmx_mio_uartx_dll_s cn31xx;
+	struct cvmx_mio_uartx_dll_s cn38xx;
+	struct cvmx_mio_uartx_dll_s cn38xxp2;
+	struct cvmx_mio_uartx_dll_s cn50xx;
+	struct cvmx_mio_uartx_dll_s cn52xx;
+	struct cvmx_mio_uartx_dll_s cn52xxp1;
+	struct cvmx_mio_uartx_dll_s cn56xx;
+	struct cvmx_mio_uartx_dll_s cn56xxp1;
+	struct cvmx_mio_uartx_dll_s cn58xx;
+	struct cvmx_mio_uartx_dll_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_far {
+	uint64_t u64;
+	struct cvmx_mio_uartx_far_s {
+		uint64_t reserved_1_63:63;
+		uint64_t far:1;
+	} s;
+	struct cvmx_mio_uartx_far_s cn30xx;
+	struct cvmx_mio_uartx_far_s cn31xx;
+	struct cvmx_mio_uartx_far_s cn38xx;
+	struct cvmx_mio_uartx_far_s cn38xxp2;
+	struct cvmx_mio_uartx_far_s cn50xx;
+	struct cvmx_mio_uartx_far_s cn52xx;
+	struct cvmx_mio_uartx_far_s cn52xxp1;
+	struct cvmx_mio_uartx_far_s cn56xx;
+	struct cvmx_mio_uartx_far_s cn56xxp1;
+	struct cvmx_mio_uartx_far_s cn58xx;
+	struct cvmx_mio_uartx_far_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_fcr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_fcr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t rxtrig:2;
+		uint64_t txtrig:2;
+		uint64_t reserved_3_3:1;
+		uint64_t txfr:1;
+		uint64_t rxfr:1;
+		uint64_t en:1;
+	} s;
+	struct cvmx_mio_uartx_fcr_s cn30xx;
+	struct cvmx_mio_uartx_fcr_s cn31xx;
+	struct cvmx_mio_uartx_fcr_s cn38xx;
+	struct cvmx_mio_uartx_fcr_s cn38xxp2;
+	struct cvmx_mio_uartx_fcr_s cn50xx;
+	struct cvmx_mio_uartx_fcr_s cn52xx;
+	struct cvmx_mio_uartx_fcr_s cn52xxp1;
+	struct cvmx_mio_uartx_fcr_s cn56xx;
+	struct cvmx_mio_uartx_fcr_s cn56xxp1;
+	struct cvmx_mio_uartx_fcr_s cn58xx;
+	struct cvmx_mio_uartx_fcr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_htx {
+	uint64_t u64;
+	struct cvmx_mio_uartx_htx_s {
+		uint64_t reserved_1_63:63;
+		uint64_t htx:1;
+	} s;
+	struct cvmx_mio_uartx_htx_s cn30xx;
+	struct cvmx_mio_uartx_htx_s cn31xx;
+	struct cvmx_mio_uartx_htx_s cn38xx;
+	struct cvmx_mio_uartx_htx_s cn38xxp2;
+	struct cvmx_mio_uartx_htx_s cn50xx;
+	struct cvmx_mio_uartx_htx_s cn52xx;
+	struct cvmx_mio_uartx_htx_s cn52xxp1;
+	struct cvmx_mio_uartx_htx_s cn56xx;
+	struct cvmx_mio_uartx_htx_s cn56xxp1;
+	struct cvmx_mio_uartx_htx_s cn58xx;
+	struct cvmx_mio_uartx_htx_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_ier {
+	uint64_t u64;
+	struct cvmx_mio_uartx_ier_s {
+		uint64_t reserved_8_63:56;
+		uint64_t ptime:1;
+		uint64_t reserved_4_6:3;
+		uint64_t edssi:1;
+		uint64_t elsi:1;
+		uint64_t etbei:1;
+		uint64_t erbfi:1;
+	} s;
+	struct cvmx_mio_uartx_ier_s cn30xx;
+	struct cvmx_mio_uartx_ier_s cn31xx;
+	struct cvmx_mio_uartx_ier_s cn38xx;
+	struct cvmx_mio_uartx_ier_s cn38xxp2;
+	struct cvmx_mio_uartx_ier_s cn50xx;
+	struct cvmx_mio_uartx_ier_s cn52xx;
+	struct cvmx_mio_uartx_ier_s cn52xxp1;
+	struct cvmx_mio_uartx_ier_s cn56xx;
+	struct cvmx_mio_uartx_ier_s cn56xxp1;
+	struct cvmx_mio_uartx_ier_s cn58xx;
+	struct cvmx_mio_uartx_ier_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_iir {
+	uint64_t u64;
+	struct cvmx_mio_uartx_iir_s {
+		uint64_t reserved_8_63:56;
+		uint64_t fen:2;
+		uint64_t reserved_4_5:2;
+		uint64_t iid:4;
+	} s;
+	struct cvmx_mio_uartx_iir_s cn30xx;
+	struct cvmx_mio_uartx_iir_s cn31xx;
+	struct cvmx_mio_uartx_iir_s cn38xx;
+	struct cvmx_mio_uartx_iir_s cn38xxp2;
+	struct cvmx_mio_uartx_iir_s cn50xx;
+	struct cvmx_mio_uartx_iir_s cn52xx;
+	struct cvmx_mio_uartx_iir_s cn52xxp1;
+	struct cvmx_mio_uartx_iir_s cn56xx;
+	struct cvmx_mio_uartx_iir_s cn56xxp1;
+	struct cvmx_mio_uartx_iir_s cn58xx;
+	struct cvmx_mio_uartx_iir_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_lcr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_lcr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t dlab:1;
+		uint64_t brk:1;
+		uint64_t reserved_5_5:1;
+		uint64_t eps:1;
+		uint64_t pen:1;
+		uint64_t stop:1;
+		uint64_t cls:2;
+	} s;
+	struct cvmx_mio_uartx_lcr_s cn30xx;
+	struct cvmx_mio_uartx_lcr_s cn31xx;
+	struct cvmx_mio_uartx_lcr_s cn38xx;
+	struct cvmx_mio_uartx_lcr_s cn38xxp2;
+	struct cvmx_mio_uartx_lcr_s cn50xx;
+	struct cvmx_mio_uartx_lcr_s cn52xx;
+	struct cvmx_mio_uartx_lcr_s cn52xxp1;
+	struct cvmx_mio_uartx_lcr_s cn56xx;
+	struct cvmx_mio_uartx_lcr_s cn56xxp1;
+	struct cvmx_mio_uartx_lcr_s cn58xx;
+	struct cvmx_mio_uartx_lcr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_lsr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_lsr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t ferr:1;
+		uint64_t temt:1;
+		uint64_t thre:1;
+		uint64_t bi:1;
+		uint64_t fe:1;
+		uint64_t pe:1;
+		uint64_t oe:1;
+		uint64_t dr:1;
+	} s;
+	struct cvmx_mio_uartx_lsr_s cn30xx;
+	struct cvmx_mio_uartx_lsr_s cn31xx;
+	struct cvmx_mio_uartx_lsr_s cn38xx;
+	struct cvmx_mio_uartx_lsr_s cn38xxp2;
+	struct cvmx_mio_uartx_lsr_s cn50xx;
+	struct cvmx_mio_uartx_lsr_s cn52xx;
+	struct cvmx_mio_uartx_lsr_s cn52xxp1;
+	struct cvmx_mio_uartx_lsr_s cn56xx;
+	struct cvmx_mio_uartx_lsr_s cn56xxp1;
+	struct cvmx_mio_uartx_lsr_s cn58xx;
+	struct cvmx_mio_uartx_lsr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_mcr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_mcr_s {
+		uint64_t reserved_6_63:58;
+		uint64_t afce:1;
+		uint64_t loop:1;
+		uint64_t out2:1;
+		uint64_t out1:1;
+		uint64_t rts:1;
+		uint64_t dtr:1;
+	} s;
+	struct cvmx_mio_uartx_mcr_s cn30xx;
+	struct cvmx_mio_uartx_mcr_s cn31xx;
+	struct cvmx_mio_uartx_mcr_s cn38xx;
+	struct cvmx_mio_uartx_mcr_s cn38xxp2;
+	struct cvmx_mio_uartx_mcr_s cn50xx;
+	struct cvmx_mio_uartx_mcr_s cn52xx;
+	struct cvmx_mio_uartx_mcr_s cn52xxp1;
+	struct cvmx_mio_uartx_mcr_s cn56xx;
+	struct cvmx_mio_uartx_mcr_s cn56xxp1;
+	struct cvmx_mio_uartx_mcr_s cn58xx;
+	struct cvmx_mio_uartx_mcr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_msr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_msr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t dcd:1;
+		uint64_t ri:1;
+		uint64_t dsr:1;
+		uint64_t cts:1;
+		uint64_t ddcd:1;
+		uint64_t teri:1;
+		uint64_t ddsr:1;
+		uint64_t dcts:1;
+	} s;
+	struct cvmx_mio_uartx_msr_s cn30xx;
+	struct cvmx_mio_uartx_msr_s cn31xx;
+	struct cvmx_mio_uartx_msr_s cn38xx;
+	struct cvmx_mio_uartx_msr_s cn38xxp2;
+	struct cvmx_mio_uartx_msr_s cn50xx;
+	struct cvmx_mio_uartx_msr_s cn52xx;
+	struct cvmx_mio_uartx_msr_s cn52xxp1;
+	struct cvmx_mio_uartx_msr_s cn56xx;
+	struct cvmx_mio_uartx_msr_s cn56xxp1;
+	struct cvmx_mio_uartx_msr_s cn58xx;
+	struct cvmx_mio_uartx_msr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_rbr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_rbr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t rbr:8;
+	} s;
+	struct cvmx_mio_uartx_rbr_s cn30xx;
+	struct cvmx_mio_uartx_rbr_s cn31xx;
+	struct cvmx_mio_uartx_rbr_s cn38xx;
+	struct cvmx_mio_uartx_rbr_s cn38xxp2;
+	struct cvmx_mio_uartx_rbr_s cn50xx;
+	struct cvmx_mio_uartx_rbr_s cn52xx;
+	struct cvmx_mio_uartx_rbr_s cn52xxp1;
+	struct cvmx_mio_uartx_rbr_s cn56xx;
+	struct cvmx_mio_uartx_rbr_s cn56xxp1;
+	struct cvmx_mio_uartx_rbr_s cn58xx;
+	struct cvmx_mio_uartx_rbr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_rfl {
+	uint64_t u64;
+	struct cvmx_mio_uartx_rfl_s {
+		uint64_t reserved_7_63:57;
+		uint64_t rfl:7;
+	} s;
+	struct cvmx_mio_uartx_rfl_s cn30xx;
+	struct cvmx_mio_uartx_rfl_s cn31xx;
+	struct cvmx_mio_uartx_rfl_s cn38xx;
+	struct cvmx_mio_uartx_rfl_s cn38xxp2;
+	struct cvmx_mio_uartx_rfl_s cn50xx;
+	struct cvmx_mio_uartx_rfl_s cn52xx;
+	struct cvmx_mio_uartx_rfl_s cn52xxp1;
+	struct cvmx_mio_uartx_rfl_s cn56xx;
+	struct cvmx_mio_uartx_rfl_s cn56xxp1;
+	struct cvmx_mio_uartx_rfl_s cn58xx;
+	struct cvmx_mio_uartx_rfl_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_rfw {
+	uint64_t u64;
+	struct cvmx_mio_uartx_rfw_s {
+		uint64_t reserved_10_63:54;
+		uint64_t rffe:1;
+		uint64_t rfpe:1;
+		uint64_t rfwd:8;
+	} s;
+	struct cvmx_mio_uartx_rfw_s cn30xx;
+	struct cvmx_mio_uartx_rfw_s cn31xx;
+	struct cvmx_mio_uartx_rfw_s cn38xx;
+	struct cvmx_mio_uartx_rfw_s cn38xxp2;
+	struct cvmx_mio_uartx_rfw_s cn50xx;
+	struct cvmx_mio_uartx_rfw_s cn52xx;
+	struct cvmx_mio_uartx_rfw_s cn52xxp1;
+	struct cvmx_mio_uartx_rfw_s cn56xx;
+	struct cvmx_mio_uartx_rfw_s cn56xxp1;
+	struct cvmx_mio_uartx_rfw_s cn58xx;
+	struct cvmx_mio_uartx_rfw_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_sbcr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_sbcr_s {
+		uint64_t reserved_1_63:63;
+		uint64_t sbcr:1;
+	} s;
+	struct cvmx_mio_uartx_sbcr_s cn30xx;
+	struct cvmx_mio_uartx_sbcr_s cn31xx;
+	struct cvmx_mio_uartx_sbcr_s cn38xx;
+	struct cvmx_mio_uartx_sbcr_s cn38xxp2;
+	struct cvmx_mio_uartx_sbcr_s cn50xx;
+	struct cvmx_mio_uartx_sbcr_s cn52xx;
+	struct cvmx_mio_uartx_sbcr_s cn52xxp1;
+	struct cvmx_mio_uartx_sbcr_s cn56xx;
+	struct cvmx_mio_uartx_sbcr_s cn56xxp1;
+	struct cvmx_mio_uartx_sbcr_s cn58xx;
+	struct cvmx_mio_uartx_sbcr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_scr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_scr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t scr:8;
+	} s;
+	struct cvmx_mio_uartx_scr_s cn30xx;
+	struct cvmx_mio_uartx_scr_s cn31xx;
+	struct cvmx_mio_uartx_scr_s cn38xx;
+	struct cvmx_mio_uartx_scr_s cn38xxp2;
+	struct cvmx_mio_uartx_scr_s cn50xx;
+	struct cvmx_mio_uartx_scr_s cn52xx;
+	struct cvmx_mio_uartx_scr_s cn52xxp1;
+	struct cvmx_mio_uartx_scr_s cn56xx;
+	struct cvmx_mio_uartx_scr_s cn56xxp1;
+	struct cvmx_mio_uartx_scr_s cn58xx;
+	struct cvmx_mio_uartx_scr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_sfe {
+	uint64_t u64;
+	struct cvmx_mio_uartx_sfe_s {
+		uint64_t reserved_1_63:63;
+		uint64_t sfe:1;
+	} s;
+	struct cvmx_mio_uartx_sfe_s cn30xx;
+	struct cvmx_mio_uartx_sfe_s cn31xx;
+	struct cvmx_mio_uartx_sfe_s cn38xx;
+	struct cvmx_mio_uartx_sfe_s cn38xxp2;
+	struct cvmx_mio_uartx_sfe_s cn50xx;
+	struct cvmx_mio_uartx_sfe_s cn52xx;
+	struct cvmx_mio_uartx_sfe_s cn52xxp1;
+	struct cvmx_mio_uartx_sfe_s cn56xx;
+	struct cvmx_mio_uartx_sfe_s cn56xxp1;
+	struct cvmx_mio_uartx_sfe_s cn58xx;
+	struct cvmx_mio_uartx_sfe_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_srr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_srr_s {
+		uint64_t reserved_3_63:61;
+		uint64_t stfr:1;
+		uint64_t srfr:1;
+		uint64_t usr:1;
+	} s;
+	struct cvmx_mio_uartx_srr_s cn30xx;
+	struct cvmx_mio_uartx_srr_s cn31xx;
+	struct cvmx_mio_uartx_srr_s cn38xx;
+	struct cvmx_mio_uartx_srr_s cn38xxp2;
+	struct cvmx_mio_uartx_srr_s cn50xx;
+	struct cvmx_mio_uartx_srr_s cn52xx;
+	struct cvmx_mio_uartx_srr_s cn52xxp1;
+	struct cvmx_mio_uartx_srr_s cn56xx;
+	struct cvmx_mio_uartx_srr_s cn56xxp1;
+	struct cvmx_mio_uartx_srr_s cn58xx;
+	struct cvmx_mio_uartx_srr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_srt {
+	uint64_t u64;
+	struct cvmx_mio_uartx_srt_s {
+		uint64_t reserved_2_63:62;
+		uint64_t srt:2;
+	} s;
+	struct cvmx_mio_uartx_srt_s cn30xx;
+	struct cvmx_mio_uartx_srt_s cn31xx;
+	struct cvmx_mio_uartx_srt_s cn38xx;
+	struct cvmx_mio_uartx_srt_s cn38xxp2;
+	struct cvmx_mio_uartx_srt_s cn50xx;
+	struct cvmx_mio_uartx_srt_s cn52xx;
+	struct cvmx_mio_uartx_srt_s cn52xxp1;
+	struct cvmx_mio_uartx_srt_s cn56xx;
+	struct cvmx_mio_uartx_srt_s cn56xxp1;
+	struct cvmx_mio_uartx_srt_s cn58xx;
+	struct cvmx_mio_uartx_srt_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_srts {
+	uint64_t u64;
+	struct cvmx_mio_uartx_srts_s {
+		uint64_t reserved_1_63:63;
+		uint64_t srts:1;
+	} s;
+	struct cvmx_mio_uartx_srts_s cn30xx;
+	struct cvmx_mio_uartx_srts_s cn31xx;
+	struct cvmx_mio_uartx_srts_s cn38xx;
+	struct cvmx_mio_uartx_srts_s cn38xxp2;
+	struct cvmx_mio_uartx_srts_s cn50xx;
+	struct cvmx_mio_uartx_srts_s cn52xx;
+	struct cvmx_mio_uartx_srts_s cn52xxp1;
+	struct cvmx_mio_uartx_srts_s cn56xx;
+	struct cvmx_mio_uartx_srts_s cn56xxp1;
+	struct cvmx_mio_uartx_srts_s cn58xx;
+	struct cvmx_mio_uartx_srts_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_stt {
+	uint64_t u64;
+	struct cvmx_mio_uartx_stt_s {
+		uint64_t reserved_2_63:62;
+		uint64_t stt:2;
+	} s;
+	struct cvmx_mio_uartx_stt_s cn30xx;
+	struct cvmx_mio_uartx_stt_s cn31xx;
+	struct cvmx_mio_uartx_stt_s cn38xx;
+	struct cvmx_mio_uartx_stt_s cn38xxp2;
+	struct cvmx_mio_uartx_stt_s cn50xx;
+	struct cvmx_mio_uartx_stt_s cn52xx;
+	struct cvmx_mio_uartx_stt_s cn52xxp1;
+	struct cvmx_mio_uartx_stt_s cn56xx;
+	struct cvmx_mio_uartx_stt_s cn56xxp1;
+	struct cvmx_mio_uartx_stt_s cn58xx;
+	struct cvmx_mio_uartx_stt_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_tfl {
+	uint64_t u64;
+	struct cvmx_mio_uartx_tfl_s {
+		uint64_t reserved_7_63:57;
+		uint64_t tfl:7;
+	} s;
+	struct cvmx_mio_uartx_tfl_s cn30xx;
+	struct cvmx_mio_uartx_tfl_s cn31xx;
+	struct cvmx_mio_uartx_tfl_s cn38xx;
+	struct cvmx_mio_uartx_tfl_s cn38xxp2;
+	struct cvmx_mio_uartx_tfl_s cn50xx;
+	struct cvmx_mio_uartx_tfl_s cn52xx;
+	struct cvmx_mio_uartx_tfl_s cn52xxp1;
+	struct cvmx_mio_uartx_tfl_s cn56xx;
+	struct cvmx_mio_uartx_tfl_s cn56xxp1;
+	struct cvmx_mio_uartx_tfl_s cn58xx;
+	struct cvmx_mio_uartx_tfl_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_tfr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_tfr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t tfr:8;
+	} s;
+	struct cvmx_mio_uartx_tfr_s cn30xx;
+	struct cvmx_mio_uartx_tfr_s cn31xx;
+	struct cvmx_mio_uartx_tfr_s cn38xx;
+	struct cvmx_mio_uartx_tfr_s cn38xxp2;
+	struct cvmx_mio_uartx_tfr_s cn50xx;
+	struct cvmx_mio_uartx_tfr_s cn52xx;
+	struct cvmx_mio_uartx_tfr_s cn52xxp1;
+	struct cvmx_mio_uartx_tfr_s cn56xx;
+	struct cvmx_mio_uartx_tfr_s cn56xxp1;
+	struct cvmx_mio_uartx_tfr_s cn58xx;
+	struct cvmx_mio_uartx_tfr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_thr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_thr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t thr:8;
+	} s;
+	struct cvmx_mio_uartx_thr_s cn30xx;
+	struct cvmx_mio_uartx_thr_s cn31xx;
+	struct cvmx_mio_uartx_thr_s cn38xx;
+	struct cvmx_mio_uartx_thr_s cn38xxp2;
+	struct cvmx_mio_uartx_thr_s cn50xx;
+	struct cvmx_mio_uartx_thr_s cn52xx;
+	struct cvmx_mio_uartx_thr_s cn52xxp1;
+	struct cvmx_mio_uartx_thr_s cn56xx;
+	struct cvmx_mio_uartx_thr_s cn56xxp1;
+	struct cvmx_mio_uartx_thr_s cn58xx;
+	struct cvmx_mio_uartx_thr_s cn58xxp1;
+};
+
+union cvmx_mio_uartx_usr {
+	uint64_t u64;
+	struct cvmx_mio_uartx_usr_s {
+		uint64_t reserved_5_63:59;
+		uint64_t rff:1;
+		uint64_t rfne:1;
+		uint64_t tfe:1;
+		uint64_t tfnf:1;
+		uint64_t busy:1;
+	} s;
+	struct cvmx_mio_uartx_usr_s cn30xx;
+	struct cvmx_mio_uartx_usr_s cn31xx;
+	struct cvmx_mio_uartx_usr_s cn38xx;
+	struct cvmx_mio_uartx_usr_s cn38xxp2;
+	struct cvmx_mio_uartx_usr_s cn50xx;
+	struct cvmx_mio_uartx_usr_s cn52xx;
+	struct cvmx_mio_uartx_usr_s cn52xxp1;
+	struct cvmx_mio_uartx_usr_s cn56xx;
+	struct cvmx_mio_uartx_usr_s cn56xxp1;
+	struct cvmx_mio_uartx_usr_s cn58xx;
+	struct cvmx_mio_uartx_usr_s cn58xxp1;
+};
+
+union cvmx_mio_uart2_dlh {
+	uint64_t u64;
+	struct cvmx_mio_uart2_dlh_s {
+		uint64_t reserved_8_63:56;
+		uint64_t dlh:8;
+	} s;
+	struct cvmx_mio_uart2_dlh_s cn52xx;
+	struct cvmx_mio_uart2_dlh_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_dll {
+	uint64_t u64;
+	struct cvmx_mio_uart2_dll_s {
+		uint64_t reserved_8_63:56;
+		uint64_t dll:8;
+	} s;
+	struct cvmx_mio_uart2_dll_s cn52xx;
+	struct cvmx_mio_uart2_dll_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_far {
+	uint64_t u64;
+	struct cvmx_mio_uart2_far_s {
+		uint64_t reserved_1_63:63;
+		uint64_t far:1;
+	} s;
+	struct cvmx_mio_uart2_far_s cn52xx;
+	struct cvmx_mio_uart2_far_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_fcr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_fcr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t rxtrig:2;
+		uint64_t txtrig:2;
+		uint64_t reserved_3_3:1;
+		uint64_t txfr:1;
+		uint64_t rxfr:1;
+		uint64_t en:1;
+	} s;
+	struct cvmx_mio_uart2_fcr_s cn52xx;
+	struct cvmx_mio_uart2_fcr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_htx {
+	uint64_t u64;
+	struct cvmx_mio_uart2_htx_s {
+		uint64_t reserved_1_63:63;
+		uint64_t htx:1;
+	} s;
+	struct cvmx_mio_uart2_htx_s cn52xx;
+	struct cvmx_mio_uart2_htx_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_ier {
+	uint64_t u64;
+	struct cvmx_mio_uart2_ier_s {
+		uint64_t reserved_8_63:56;
+		uint64_t ptime:1;
+		uint64_t reserved_4_6:3;
+		uint64_t edssi:1;
+		uint64_t elsi:1;
+		uint64_t etbei:1;
+		uint64_t erbfi:1;
+	} s;
+	struct cvmx_mio_uart2_ier_s cn52xx;
+	struct cvmx_mio_uart2_ier_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_iir {
+	uint64_t u64;
+	struct cvmx_mio_uart2_iir_s {
+		uint64_t reserved_8_63:56;
+		uint64_t fen:2;
+		uint64_t reserved_4_5:2;
+		uint64_t iid:4;
+	} s;
+	struct cvmx_mio_uart2_iir_s cn52xx;
+	struct cvmx_mio_uart2_iir_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_lcr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_lcr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t dlab:1;
+		uint64_t brk:1;
+		uint64_t reserved_5_5:1;
+		uint64_t eps:1;
+		uint64_t pen:1;
+		uint64_t stop:1;
+		uint64_t cls:2;
+	} s;
+	struct cvmx_mio_uart2_lcr_s cn52xx;
+	struct cvmx_mio_uart2_lcr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_lsr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_lsr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t ferr:1;
+		uint64_t temt:1;
+		uint64_t thre:1;
+		uint64_t bi:1;
+		uint64_t fe:1;
+		uint64_t pe:1;
+		uint64_t oe:1;
+		uint64_t dr:1;
+	} s;
+	struct cvmx_mio_uart2_lsr_s cn52xx;
+	struct cvmx_mio_uart2_lsr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_mcr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_mcr_s {
+		uint64_t reserved_6_63:58;
+		uint64_t afce:1;
+		uint64_t loop:1;
+		uint64_t out2:1;
+		uint64_t out1:1;
+		uint64_t rts:1;
+		uint64_t dtr:1;
+	} s;
+	struct cvmx_mio_uart2_mcr_s cn52xx;
+	struct cvmx_mio_uart2_mcr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_msr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_msr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t dcd:1;
+		uint64_t ri:1;
+		uint64_t dsr:1;
+		uint64_t cts:1;
+		uint64_t ddcd:1;
+		uint64_t teri:1;
+		uint64_t ddsr:1;
+		uint64_t dcts:1;
+	} s;
+	struct cvmx_mio_uart2_msr_s cn52xx;
+	struct cvmx_mio_uart2_msr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_rbr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_rbr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t rbr:8;
+	} s;
+	struct cvmx_mio_uart2_rbr_s cn52xx;
+	struct cvmx_mio_uart2_rbr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_rfl {
+	uint64_t u64;
+	struct cvmx_mio_uart2_rfl_s {
+		uint64_t reserved_7_63:57;
+		uint64_t rfl:7;
+	} s;
+	struct cvmx_mio_uart2_rfl_s cn52xx;
+	struct cvmx_mio_uart2_rfl_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_rfw {
+	uint64_t u64;
+	struct cvmx_mio_uart2_rfw_s {
+		uint64_t reserved_10_63:54;
+		uint64_t rffe:1;
+		uint64_t rfpe:1;
+		uint64_t rfwd:8;
+	} s;
+	struct cvmx_mio_uart2_rfw_s cn52xx;
+	struct cvmx_mio_uart2_rfw_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_sbcr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_sbcr_s {
+		uint64_t reserved_1_63:63;
+		uint64_t sbcr:1;
+	} s;
+	struct cvmx_mio_uart2_sbcr_s cn52xx;
+	struct cvmx_mio_uart2_sbcr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_scr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_scr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t scr:8;
+	} s;
+	struct cvmx_mio_uart2_scr_s cn52xx;
+	struct cvmx_mio_uart2_scr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_sfe {
+	uint64_t u64;
+	struct cvmx_mio_uart2_sfe_s {
+		uint64_t reserved_1_63:63;
+		uint64_t sfe:1;
+	} s;
+	struct cvmx_mio_uart2_sfe_s cn52xx;
+	struct cvmx_mio_uart2_sfe_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_srr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_srr_s {
+		uint64_t reserved_3_63:61;
+		uint64_t stfr:1;
+		uint64_t srfr:1;
+		uint64_t usr:1;
+	} s;
+	struct cvmx_mio_uart2_srr_s cn52xx;
+	struct cvmx_mio_uart2_srr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_srt {
+	uint64_t u64;
+	struct cvmx_mio_uart2_srt_s {
+		uint64_t reserved_2_63:62;
+		uint64_t srt:2;
+	} s;
+	struct cvmx_mio_uart2_srt_s cn52xx;
+	struct cvmx_mio_uart2_srt_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_srts {
+	uint64_t u64;
+	struct cvmx_mio_uart2_srts_s {
+		uint64_t reserved_1_63:63;
+		uint64_t srts:1;
+	} s;
+	struct cvmx_mio_uart2_srts_s cn52xx;
+	struct cvmx_mio_uart2_srts_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_stt {
+	uint64_t u64;
+	struct cvmx_mio_uart2_stt_s {
+		uint64_t reserved_2_63:62;
+		uint64_t stt:2;
+	} s;
+	struct cvmx_mio_uart2_stt_s cn52xx;
+	struct cvmx_mio_uart2_stt_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_tfl {
+	uint64_t u64;
+	struct cvmx_mio_uart2_tfl_s {
+		uint64_t reserved_7_63:57;
+		uint64_t tfl:7;
+	} s;
+	struct cvmx_mio_uart2_tfl_s cn52xx;
+	struct cvmx_mio_uart2_tfl_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_tfr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_tfr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t tfr:8;
+	} s;
+	struct cvmx_mio_uart2_tfr_s cn52xx;
+	struct cvmx_mio_uart2_tfr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_thr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_thr_s {
+		uint64_t reserved_8_63:56;
+		uint64_t thr:8;
+	} s;
+	struct cvmx_mio_uart2_thr_s cn52xx;
+	struct cvmx_mio_uart2_thr_s cn52xxp1;
+};
+
+union cvmx_mio_uart2_usr {
+	uint64_t u64;
+	struct cvmx_mio_uart2_usr_s {
+		uint64_t reserved_5_63:59;
+		uint64_t rff:1;
+		uint64_t rfne:1;
+		uint64_t tfe:1;
+		uint64_t tfnf:1;
+		uint64_t busy:1;
+	} s;
+	struct cvmx_mio_uart2_usr_s cn52xx;
+	struct cvmx_mio_uart2_usr_s cn52xxp1;
+};
+
+#endif
diff --git a/arch/mips/include/asm/octeon/cvmx-pow-defs.h b/arch/mips/include/asm/octeon/cvmx-pow-defs.h
new file mode 100644
index 00000000000..2d82e24be51
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-pow-defs.h
@@ -0,0 +1,698 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_POW_DEFS_H__
+#define __CVMX_POW_DEFS_H__
+
+#define CVMX_POW_BIST_STAT \
+	 CVMX_ADD_IO_SEG(0x00016700000003F8ull)
+#define CVMX_POW_DS_PC \
+	 CVMX_ADD_IO_SEG(0x0001670000000398ull)
+#define CVMX_POW_ECC_ERR \
+	 CVMX_ADD_IO_SEG(0x0001670000000218ull)
+#define CVMX_POW_INT_CTL \
+	 CVMX_ADD_IO_SEG(0x0001670000000220ull)
+#define CVMX_POW_IQ_CNTX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001670000000340ull + (((offset) & 7) * 8))
+#define CVMX_POW_IQ_COM_CNT \
+	 CVMX_ADD_IO_SEG(0x0001670000000388ull)
+#define CVMX_POW_IQ_INT \
+	 CVMX_ADD_IO_SEG(0x0001670000000238ull)
+#define CVMX_POW_IQ_INT_EN \
+	 CVMX_ADD_IO_SEG(0x0001670000000240ull)
+#define CVMX_POW_IQ_THRX(offset) \
+	 CVMX_ADD_IO_SEG(0x00016700000003A0ull + (((offset) & 7) * 8))
+#define CVMX_POW_NOS_CNT \
+	 CVMX_ADD_IO_SEG(0x0001670000000228ull)
+#define CVMX_POW_NW_TIM \
+	 CVMX_ADD_IO_SEG(0x0001670000000210ull)
+#define CVMX_POW_PF_RST_MSK \
+	 CVMX_ADD_IO_SEG(0x0001670000000230ull)
+#define CVMX_POW_PP_GRP_MSKX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001670000000000ull + (((offset) & 15) * 8))
+#define CVMX_POW_QOS_RNDX(offset) \
+	 CVMX_ADD_IO_SEG(0x00016700000001C0ull + (((offset) & 7) * 8))
+#define CVMX_POW_QOS_THRX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001670000000180ull + (((offset) & 7) * 8))
+#define CVMX_POW_TS_PC \
+	 CVMX_ADD_IO_SEG(0x0001670000000390ull)
+#define CVMX_POW_WA_COM_PC \
+	 CVMX_ADD_IO_SEG(0x0001670000000380ull)
+#define CVMX_POW_WA_PCX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001670000000300ull + (((offset) & 7) * 8))
+#define CVMX_POW_WQ_INT \
+	 CVMX_ADD_IO_SEG(0x0001670000000200ull)
+#define CVMX_POW_WQ_INT_CNTX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001670000000100ull + (((offset) & 15) * 8))
+#define CVMX_POW_WQ_INT_PC \
+	 CVMX_ADD_IO_SEG(0x0001670000000208ull)
+#define CVMX_POW_WQ_INT_THRX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001670000000080ull + (((offset) & 15) * 8))
+#define CVMX_POW_WS_PCX(offset) \
+	 CVMX_ADD_IO_SEG(0x0001670000000280ull + (((offset) & 15) * 8))
+
+union cvmx_pow_bist_stat {
+	uint64_t u64;
+	struct cvmx_pow_bist_stat_s {
+		uint64_t reserved_32_63:32;
+		uint64_t pp:16;
+		uint64_t reserved_0_15:16;
+	} s;
+	struct cvmx_pow_bist_stat_cn30xx {
+		uint64_t reserved_17_63:47;
+		uint64_t pp:1;
+		uint64_t reserved_9_15:7;
+		uint64_t cam:1;
+		uint64_t nbt1:1;
+		uint64_t nbt0:1;
+		uint64_t index:1;
+		uint64_t fidx:1;
+		uint64_t nbr1:1;
+		uint64_t nbr0:1;
+		uint64_t pend:1;
+		uint64_t adr:1;
+	} cn30xx;
+	struct cvmx_pow_bist_stat_cn31xx {
+		uint64_t reserved_18_63:46;
+		uint64_t pp:2;
+		uint64_t reserved_9_15:7;
+		uint64_t cam:1;
+		uint64_t nbt1:1;
+		uint64_t nbt0:1;
+		uint64_t index:1;
+		uint64_t fidx:1;
+		uint64_t nbr1:1;
+		uint64_t nbr0:1;
+		uint64_t pend:1;
+		uint64_t adr:1;
+	} cn31xx;
+	struct cvmx_pow_bist_stat_cn38xx {
+		uint64_t reserved_32_63:32;
+		uint64_t pp:16;
+		uint64_t reserved_10_15:6;
+		uint64_t cam:1;
+		uint64_t nbt:1;
+		uint64_t index:1;
+		uint64_t fidx:1;
+		uint64_t nbr1:1;
+		uint64_t nbr0:1;
+		uint64_t pend1:1;
+		uint64_t pend0:1;
+		uint64_t adr1:1;
+		uint64_t adr0:1;
+	} cn38xx;
+	struct cvmx_pow_bist_stat_cn38xx cn38xxp2;
+	struct cvmx_pow_bist_stat_cn31xx cn50xx;
+	struct cvmx_pow_bist_stat_cn52xx {
+		uint64_t reserved_20_63:44;
+		uint64_t pp:4;
+		uint64_t reserved_9_15:7;
+		uint64_t cam:1;
+		uint64_t nbt1:1;
+		uint64_t nbt0:1;
+		uint64_t index:1;
+		uint64_t fidx:1;
+		uint64_t nbr1:1;
+		uint64_t nbr0:1;
+		uint64_t pend:1;
+		uint64_t adr:1;
+	} cn52xx;
+	struct cvmx_pow_bist_stat_cn52xx cn52xxp1;
+	struct cvmx_pow_bist_stat_cn56xx {
+		uint64_t reserved_28_63:36;
+		uint64_t pp:12;
+		uint64_t reserved_10_15:6;
+		uint64_t cam:1;
+		uint64_t nbt:1;
+		uint64_t index:1;
+		uint64_t fidx:1;
+		uint64_t nbr1:1;
+		uint64_t nbr0:1;
+		uint64_t pend1:1;
+		uint64_t pend0:1;
+		uint64_t adr1:1;
+		uint64_t adr0:1;
+	} cn56xx;
+	struct cvmx_pow_bist_stat_cn56xx cn56xxp1;
+	struct cvmx_pow_bist_stat_cn38xx cn58xx;
+	struct cvmx_pow_bist_stat_cn38xx cn58xxp1;
+};
+
+union cvmx_pow_ds_pc {
+	uint64_t u64;
+	struct cvmx_pow_ds_pc_s {
+		uint64_t reserved_32_63:32;
+		uint64_t ds_pc:32;
+	} s;
+	struct cvmx_pow_ds_pc_s cn30xx;
+	struct cvmx_pow_ds_pc_s cn31xx;
+	struct cvmx_pow_ds_pc_s cn38xx;
+	struct cvmx_pow_ds_pc_s cn38xxp2;
+	struct cvmx_pow_ds_pc_s cn50xx;
+	struct cvmx_pow_ds_pc_s cn52xx;
+	struct cvmx_pow_ds_pc_s cn52xxp1;
+	struct cvmx_pow_ds_pc_s cn56xx;
+	struct cvmx_pow_ds_pc_s cn56xxp1;
+	struct cvmx_pow_ds_pc_s cn58xx;
+	struct cvmx_pow_ds_pc_s cn58xxp1;
+};
+
+union cvmx_pow_ecc_err {
+	uint64_t u64;
+	struct cvmx_pow_ecc_err_s {
+		uint64_t reserved_45_63:19;
+		uint64_t iop_ie:13;
+		uint64_t reserved_29_31:3;
+		uint64_t iop:13;
+		uint64_t reserved_14_15:2;
+		uint64_t rpe_ie:1;
+		uint64_t rpe:1;
+		uint64_t reserved_9_11:3;
+		uint64_t syn:5;
+		uint64_t dbe_ie:1;
+		uint64_t sbe_ie:1;
+		uint64_t dbe:1;
+		uint64_t sbe:1;
+	} s;
+	struct cvmx_pow_ecc_err_s cn30xx;
+	struct cvmx_pow_ecc_err_cn31xx {
+		uint64_t reserved_14_63:50;
+		uint64_t rpe_ie:1;
+		uint64_t rpe:1;
+		uint64_t reserved_9_11:3;
+		uint64_t syn:5;
+		uint64_t dbe_ie:1;
+		uint64_t sbe_ie:1;
+		uint64_t dbe:1;
+		uint64_t sbe:1;
+	} cn31xx;
+	struct cvmx_pow_ecc_err_s cn38xx;
+	struct cvmx_pow_ecc_err_cn31xx cn38xxp2;
+	struct cvmx_pow_ecc_err_s cn50xx;
+	struct cvmx_pow_ecc_err_s cn52xx;
+	struct cvmx_pow_ecc_err_s cn52xxp1;
+	struct cvmx_pow_ecc_err_s cn56xx;
+	struct cvmx_pow_ecc_err_s cn56xxp1;
+	struct cvmx_pow_ecc_err_s cn58xx;
+	struct cvmx_pow_ecc_err_s cn58xxp1;
+};
+
+union cvmx_pow_int_ctl {
+	uint64_t u64;
+	struct cvmx_pow_int_ctl_s {
+		uint64_t reserved_6_63:58;
+		uint64_t pfr_dis:1;
+		uint64_t nbr_thr:5;
+	} s;
+	struct cvmx_pow_int_ctl_s cn30xx;
+	struct cvmx_pow_int_ctl_s cn31xx;
+	struct cvmx_pow_int_ctl_s cn38xx;
+	struct cvmx_pow_int_ctl_s cn38xxp2;
+	struct cvmx_pow_int_ctl_s cn50xx;
+	struct cvmx_pow_int_ctl_s cn52xx;
+	struct cvmx_pow_int_ctl_s cn52xxp1;
+	struct cvmx_pow_int_ctl_s cn56xx;
+	struct cvmx_pow_int_ctl_s cn56xxp1;
+	struct cvmx_pow_int_ctl_s cn58xx;
+	struct cvmx_pow_int_ctl_s cn58xxp1;
+};
+
+union cvmx_pow_iq_cntx {
+	uint64_t u64;
+	struct cvmx_pow_iq_cntx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t iq_cnt:32;
+	} s;
+	struct cvmx_pow_iq_cntx_s cn30xx;
+	struct cvmx_pow_iq_cntx_s cn31xx;
+	struct cvmx_pow_iq_cntx_s cn38xx;
+	struct cvmx_pow_iq_cntx_s cn38xxp2;
+	struct cvmx_pow_iq_cntx_s cn50xx;
+	struct cvmx_pow_iq_cntx_s cn52xx;
+	struct cvmx_pow_iq_cntx_s cn52xxp1;
+	struct cvmx_pow_iq_cntx_s cn56xx;
+	struct cvmx_pow_iq_cntx_s cn56xxp1;
+	struct cvmx_pow_iq_cntx_s cn58xx;
+	struct cvmx_pow_iq_cntx_s cn58xxp1;
+};
+
+union cvmx_pow_iq_com_cnt {
+	uint64_t u64;
+	struct cvmx_pow_iq_com_cnt_s {
+		uint64_t reserved_32_63:32;
+		uint64_t iq_cnt:32;
+	} s;
+	struct cvmx_pow_iq_com_cnt_s cn30xx;
+	struct cvmx_pow_iq_com_cnt_s cn31xx;
+	struct cvmx_pow_iq_com_cnt_s cn38xx;
+	struct cvmx_pow_iq_com_cnt_s cn38xxp2;
+	struct cvmx_pow_iq_com_cnt_s cn50xx;
+	struct cvmx_pow_iq_com_cnt_s cn52xx;
+	struct cvmx_pow_iq_com_cnt_s cn52xxp1;
+	struct cvmx_pow_iq_com_cnt_s cn56xx;
+	struct cvmx_pow_iq_com_cnt_s cn56xxp1;
+	struct cvmx_pow_iq_com_cnt_s cn58xx;
+	struct cvmx_pow_iq_com_cnt_s cn58xxp1;
+};
+
+union cvmx_pow_iq_int {
+	uint64_t u64;
+	struct cvmx_pow_iq_int_s {
+		uint64_t reserved_8_63:56;
+		uint64_t iq_int:8;
+	} s;
+	struct cvmx_pow_iq_int_s cn52xx;
+	struct cvmx_pow_iq_int_s cn52xxp1;
+	struct cvmx_pow_iq_int_s cn56xx;
+	struct cvmx_pow_iq_int_s cn56xxp1;
+};
+
+union cvmx_pow_iq_int_en {
+	uint64_t u64;
+	struct cvmx_pow_iq_int_en_s {
+		uint64_t reserved_8_63:56;
+		uint64_t int_en:8;
+	} s;
+	struct cvmx_pow_iq_int_en_s cn52xx;
+	struct cvmx_pow_iq_int_en_s cn52xxp1;
+	struct cvmx_pow_iq_int_en_s cn56xx;
+	struct cvmx_pow_iq_int_en_s cn56xxp1;
+};
+
+union cvmx_pow_iq_thrx {
+	uint64_t u64;
+	struct cvmx_pow_iq_thrx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t iq_thr:32;
+	} s;
+	struct cvmx_pow_iq_thrx_s cn52xx;
+	struct cvmx_pow_iq_thrx_s cn52xxp1;
+	struct cvmx_pow_iq_thrx_s cn56xx;
+	struct cvmx_pow_iq_thrx_s cn56xxp1;
+};
+
+union cvmx_pow_nos_cnt {
+	uint64_t u64;
+	struct cvmx_pow_nos_cnt_s {
+		uint64_t reserved_12_63:52;
+		uint64_t nos_cnt:12;
+	} s;
+	struct cvmx_pow_nos_cnt_cn30xx {
+		uint64_t reserved_7_63:57;
+		uint64_t nos_cnt:7;
+	} cn30xx;
+	struct cvmx_pow_nos_cnt_cn31xx {
+		uint64_t reserved_9_63:55;
+		uint64_t nos_cnt:9;
+	} cn31xx;
+	struct cvmx_pow_nos_cnt_s cn38xx;
+	struct cvmx_pow_nos_cnt_s cn38xxp2;
+	struct cvmx_pow_nos_cnt_cn31xx cn50xx;
+	struct cvmx_pow_nos_cnt_cn52xx {
+		uint64_t reserved_10_63:54;
+		uint64_t nos_cnt:10;
+	} cn52xx;
+	struct cvmx_pow_nos_cnt_cn52xx cn52xxp1;
+	struct cvmx_pow_nos_cnt_s cn56xx;
+	struct cvmx_pow_nos_cnt_s cn56xxp1;
+	struct cvmx_pow_nos_cnt_s cn58xx;
+	struct cvmx_pow_nos_cnt_s cn58xxp1;
+};
+
+union cvmx_pow_nw_tim {
+	uint64_t u64;
+	struct cvmx_pow_nw_tim_s {
+		uint64_t reserved_10_63:54;
+		uint64_t nw_tim:10;
+	} s;
+	struct cvmx_pow_nw_tim_s cn30xx;
+	struct cvmx_pow_nw_tim_s cn31xx;
+	struct cvmx_pow_nw_tim_s cn38xx;
+	struct cvmx_pow_nw_tim_s cn38xxp2;
+	struct cvmx_pow_nw_tim_s cn50xx;
+	struct cvmx_pow_nw_tim_s cn52xx;
+	struct cvmx_pow_nw_tim_s cn52xxp1;
+	struct cvmx_pow_nw_tim_s cn56xx;
+	struct cvmx_pow_nw_tim_s cn56xxp1;
+	struct cvmx_pow_nw_tim_s cn58xx;
+	struct cvmx_pow_nw_tim_s cn58xxp1;
+};
+
+union cvmx_pow_pf_rst_msk {
+	uint64_t u64;
+	struct cvmx_pow_pf_rst_msk_s {
+		uint64_t reserved_8_63:56;
+		uint64_t rst_msk:8;
+	} s;
+	struct cvmx_pow_pf_rst_msk_s cn50xx;
+	struct cvmx_pow_pf_rst_msk_s cn52xx;
+	struct cvmx_pow_pf_rst_msk_s cn52xxp1;
+	struct cvmx_pow_pf_rst_msk_s cn56xx;
+	struct cvmx_pow_pf_rst_msk_s cn56xxp1;
+	struct cvmx_pow_pf_rst_msk_s cn58xx;
+	struct cvmx_pow_pf_rst_msk_s cn58xxp1;
+};
+
+union cvmx_pow_pp_grp_mskx {
+	uint64_t u64;
+	struct cvmx_pow_pp_grp_mskx_s {
+		uint64_t reserved_48_63:16;
+		uint64_t qos7_pri:4;
+		uint64_t qos6_pri:4;
+		uint64_t qos5_pri:4;
+		uint64_t qos4_pri:4;
+		uint64_t qos3_pri:4;
+		uint64_t qos2_pri:4;
+		uint64_t qos1_pri:4;
+		uint64_t qos0_pri:4;
+		uint64_t grp_msk:16;
+	} s;
+	struct cvmx_pow_pp_grp_mskx_cn30xx {
+		uint64_t reserved_16_63:48;
+		uint64_t grp_msk:16;
+	} cn30xx;
+	struct cvmx_pow_pp_grp_mskx_cn30xx cn31xx;
+	struct cvmx_pow_pp_grp_mskx_cn30xx cn38xx;
+	struct cvmx_pow_pp_grp_mskx_cn30xx cn38xxp2;
+	struct cvmx_pow_pp_grp_mskx_s cn50xx;
+	struct cvmx_pow_pp_grp_mskx_s cn52xx;
+	struct cvmx_pow_pp_grp_mskx_s cn52xxp1;
+	struct cvmx_pow_pp_grp_mskx_s cn56xx;
+	struct cvmx_pow_pp_grp_mskx_s cn56xxp1;
+	struct cvmx_pow_pp_grp_mskx_s cn58xx;
+	struct cvmx_pow_pp_grp_mskx_s cn58xxp1;
+};
+
+union cvmx_pow_qos_rndx {
+	uint64_t u64;
+	struct cvmx_pow_qos_rndx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t rnd_p3:8;
+		uint64_t rnd_p2:8;
+		uint64_t rnd_p1:8;
+		uint64_t rnd:8;
+	} s;
+	struct cvmx_pow_qos_rndx_s cn30xx;
+	struct cvmx_pow_qos_rndx_s cn31xx;
+	struct cvmx_pow_qos_rndx_s cn38xx;
+	struct cvmx_pow_qos_rndx_s cn38xxp2;
+	struct cvmx_pow_qos_rndx_s cn50xx;
+	struct cvmx_pow_qos_rndx_s cn52xx;
+	struct cvmx_pow_qos_rndx_s cn52xxp1;
+	struct cvmx_pow_qos_rndx_s cn56xx;
+	struct cvmx_pow_qos_rndx_s cn56xxp1;
+	struct cvmx_pow_qos_rndx_s cn58xx;
+	struct cvmx_pow_qos_rndx_s cn58xxp1;
+};
+
+union cvmx_pow_qos_thrx {
+	uint64_t u64;
+	struct cvmx_pow_qos_thrx_s {
+		uint64_t reserved_60_63:4;
+		uint64_t des_cnt:12;
+		uint64_t buf_cnt:12;
+		uint64_t free_cnt:12;
+		uint64_t reserved_23_23:1;
+		uint64_t max_thr:11;
+		uint64_t reserved_11_11:1;
+		uint64_t min_thr:11;
+	} s;
+	struct cvmx_pow_qos_thrx_cn30xx {
+		uint64_t reserved_55_63:9;
+		uint64_t des_cnt:7;
+		uint64_t reserved_43_47:5;
+		uint64_t buf_cnt:7;
+		uint64_t reserved_31_35:5;
+		uint64_t free_cnt:7;
+		uint64_t reserved_18_23:6;
+		uint64_t max_thr:6;
+		uint64_t reserved_6_11:6;
+		uint64_t min_thr:6;
+	} cn30xx;
+	struct cvmx_pow_qos_thrx_cn31xx {
+		uint64_t reserved_57_63:7;
+		uint64_t des_cnt:9;
+		uint64_t reserved_45_47:3;
+		uint64_t buf_cnt:9;
+		uint64_t reserved_33_35:3;
+		uint64_t free_cnt:9;
+		uint64_t reserved_20_23:4;
+		uint64_t max_thr:8;
+		uint64_t reserved_8_11:4;
+		uint64_t min_thr:8;
+	} cn31xx;
+	struct cvmx_pow_qos_thrx_s cn38xx;
+	struct cvmx_pow_qos_thrx_s cn38xxp2;
+	struct cvmx_pow_qos_thrx_cn31xx cn50xx;
+	struct cvmx_pow_qos_thrx_cn52xx {
+		uint64_t reserved_58_63:6;
+		uint64_t des_cnt:10;
+		uint64_t reserved_46_47:2;
+		uint64_t buf_cnt:10;
+		uint64_t reserved_34_35:2;
+		uint64_t free_cnt:10;
+		uint64_t reserved_21_23:3;
+		uint64_t max_thr:9;
+		uint64_t reserved_9_11:3;
+		uint64_t min_thr:9;
+	} cn52xx;
+	struct cvmx_pow_qos_thrx_cn52xx cn52xxp1;
+	struct cvmx_pow_qos_thrx_s cn56xx;
+	struct cvmx_pow_qos_thrx_s cn56xxp1;
+	struct cvmx_pow_qos_thrx_s cn58xx;
+	struct cvmx_pow_qos_thrx_s cn58xxp1;
+};
+
+union cvmx_pow_ts_pc {
+	uint64_t u64;
+	struct cvmx_pow_ts_pc_s {
+		uint64_t reserved_32_63:32;
+		uint64_t ts_pc:32;
+	} s;
+	struct cvmx_pow_ts_pc_s cn30xx;
+	struct cvmx_pow_ts_pc_s cn31xx;
+	struct cvmx_pow_ts_pc_s cn38xx;
+	struct cvmx_pow_ts_pc_s cn38xxp2;
+	struct cvmx_pow_ts_pc_s cn50xx;
+	struct cvmx_pow_ts_pc_s cn52xx;
+	struct cvmx_pow_ts_pc_s cn52xxp1;
+	struct cvmx_pow_ts_pc_s cn56xx;
+	struct cvmx_pow_ts_pc_s cn56xxp1;
+	struct cvmx_pow_ts_pc_s cn58xx;
+	struct cvmx_pow_ts_pc_s cn58xxp1;
+};
+
+union cvmx_pow_wa_com_pc {
+	uint64_t u64;
+	struct cvmx_pow_wa_com_pc_s {
+		uint64_t reserved_32_63:32;
+		uint64_t wa_pc:32;
+	} s;
+	struct cvmx_pow_wa_com_pc_s cn30xx;
+	struct cvmx_pow_wa_com_pc_s cn31xx;
+	struct cvmx_pow_wa_com_pc_s cn38xx;
+	struct cvmx_pow_wa_com_pc_s cn38xxp2;
+	struct cvmx_pow_wa_com_pc_s cn50xx;
+	struct cvmx_pow_wa_com_pc_s cn52xx;
+	struct cvmx_pow_wa_com_pc_s cn52xxp1;
+	struct cvmx_pow_wa_com_pc_s cn56xx;
+	struct cvmx_pow_wa_com_pc_s cn56xxp1;
+	struct cvmx_pow_wa_com_pc_s cn58xx;
+	struct cvmx_pow_wa_com_pc_s cn58xxp1;
+};
+
+union cvmx_pow_wa_pcx {
+	uint64_t u64;
+	struct cvmx_pow_wa_pcx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t wa_pc:32;
+	} s;
+	struct cvmx_pow_wa_pcx_s cn30xx;
+	struct cvmx_pow_wa_pcx_s cn31xx;
+	struct cvmx_pow_wa_pcx_s cn38xx;
+	struct cvmx_pow_wa_pcx_s cn38xxp2;
+	struct cvmx_pow_wa_pcx_s cn50xx;
+	struct cvmx_pow_wa_pcx_s cn52xx;
+	struct cvmx_pow_wa_pcx_s cn52xxp1;
+	struct cvmx_pow_wa_pcx_s cn56xx;
+	struct cvmx_pow_wa_pcx_s cn56xxp1;
+	struct cvmx_pow_wa_pcx_s cn58xx;
+	struct cvmx_pow_wa_pcx_s cn58xxp1;
+};
+
+union cvmx_pow_wq_int {
+	uint64_t u64;
+	struct cvmx_pow_wq_int_s {
+		uint64_t reserved_32_63:32;
+		uint64_t iq_dis:16;
+		uint64_t wq_int:16;
+	} s;
+	struct cvmx_pow_wq_int_s cn30xx;
+	struct cvmx_pow_wq_int_s cn31xx;
+	struct cvmx_pow_wq_int_s cn38xx;
+	struct cvmx_pow_wq_int_s cn38xxp2;
+	struct cvmx_pow_wq_int_s cn50xx;
+	struct cvmx_pow_wq_int_s cn52xx;
+	struct cvmx_pow_wq_int_s cn52xxp1;
+	struct cvmx_pow_wq_int_s cn56xx;
+	struct cvmx_pow_wq_int_s cn56xxp1;
+	struct cvmx_pow_wq_int_s cn58xx;
+	struct cvmx_pow_wq_int_s cn58xxp1;
+};
+
+union cvmx_pow_wq_int_cntx {
+	uint64_t u64;
+	struct cvmx_pow_wq_int_cntx_s {
+		uint64_t reserved_28_63:36;
+		uint64_t tc_cnt:4;
+		uint64_t ds_cnt:12;
+		uint64_t iq_cnt:12;
+	} s;
+	struct cvmx_pow_wq_int_cntx_cn30xx {
+		uint64_t reserved_28_63:36;
+		uint64_t tc_cnt:4;
+		uint64_t reserved_19_23:5;
+		uint64_t ds_cnt:7;
+		uint64_t reserved_7_11:5;
+		uint64_t iq_cnt:7;
+	} cn30xx;
+	struct cvmx_pow_wq_int_cntx_cn31xx {
+		uint64_t reserved_28_63:36;
+		uint64_t tc_cnt:4;
+		uint64_t reserved_21_23:3;
+		uint64_t ds_cnt:9;
+		uint64_t reserved_9_11:3;
+		uint64_t iq_cnt:9;
+	} cn31xx;
+	struct cvmx_pow_wq_int_cntx_s cn38xx;
+	struct cvmx_pow_wq_int_cntx_s cn38xxp2;
+	struct cvmx_pow_wq_int_cntx_cn31xx cn50xx;
+	struct cvmx_pow_wq_int_cntx_cn52xx {
+		uint64_t reserved_28_63:36;
+		uint64_t tc_cnt:4;
+		uint64_t reserved_22_23:2;
+		uint64_t ds_cnt:10;
+		uint64_t reserved_10_11:2;
+		uint64_t iq_cnt:10;
+	} cn52xx;
+	struct cvmx_pow_wq_int_cntx_cn52xx cn52xxp1;
+	struct cvmx_pow_wq_int_cntx_s cn56xx;
+	struct cvmx_pow_wq_int_cntx_s cn56xxp1;
+	struct cvmx_pow_wq_int_cntx_s cn58xx;
+	struct cvmx_pow_wq_int_cntx_s cn58xxp1;
+};
+
+union cvmx_pow_wq_int_pc {
+	uint64_t u64;
+	struct cvmx_pow_wq_int_pc_s {
+		uint64_t reserved_60_63:4;
+		uint64_t pc:28;
+		uint64_t reserved_28_31:4;
+		uint64_t pc_thr:20;
+		uint64_t reserved_0_7:8;
+	} s;
+	struct cvmx_pow_wq_int_pc_s cn30xx;
+	struct cvmx_pow_wq_int_pc_s cn31xx;
+	struct cvmx_pow_wq_int_pc_s cn38xx;
+	struct cvmx_pow_wq_int_pc_s cn38xxp2;
+	struct cvmx_pow_wq_int_pc_s cn50xx;
+	struct cvmx_pow_wq_int_pc_s cn52xx;
+	struct cvmx_pow_wq_int_pc_s cn52xxp1;
+	struct cvmx_pow_wq_int_pc_s cn56xx;
+	struct cvmx_pow_wq_int_pc_s cn56xxp1;
+	struct cvmx_pow_wq_int_pc_s cn58xx;
+	struct cvmx_pow_wq_int_pc_s cn58xxp1;
+};
+
+union cvmx_pow_wq_int_thrx {
+	uint64_t u64;
+	struct cvmx_pow_wq_int_thrx_s {
+		uint64_t reserved_29_63:35;
+		uint64_t tc_en:1;
+		uint64_t tc_thr:4;
+		uint64_t reserved_23_23:1;
+		uint64_t ds_thr:11;
+		uint64_t reserved_11_11:1;
+		uint64_t iq_thr:11;
+	} s;
+	struct cvmx_pow_wq_int_thrx_cn30xx {
+		uint64_t reserved_29_63:35;
+		uint64_t tc_en:1;
+		uint64_t tc_thr:4;
+		uint64_t reserved_18_23:6;
+		uint64_t ds_thr:6;
+		uint64_t reserved_6_11:6;
+		uint64_t iq_thr:6;
+	} cn30xx;
+	struct cvmx_pow_wq_int_thrx_cn31xx {
+		uint64_t reserved_29_63:35;
+		uint64_t tc_en:1;
+		uint64_t tc_thr:4;
+		uint64_t reserved_20_23:4;
+		uint64_t ds_thr:8;
+		uint64_t reserved_8_11:4;
+		uint64_t iq_thr:8;
+	} cn31xx;
+	struct cvmx_pow_wq_int_thrx_s cn38xx;
+	struct cvmx_pow_wq_int_thrx_s cn38xxp2;
+	struct cvmx_pow_wq_int_thrx_cn31xx cn50xx;
+	struct cvmx_pow_wq_int_thrx_cn52xx {
+		uint64_t reserved_29_63:35;
+		uint64_t tc_en:1;
+		uint64_t tc_thr:4;
+		uint64_t reserved_21_23:3;
+		uint64_t ds_thr:9;
+		uint64_t reserved_9_11:3;
+		uint64_t iq_thr:9;
+	} cn52xx;
+	struct cvmx_pow_wq_int_thrx_cn52xx cn52xxp1;
+	struct cvmx_pow_wq_int_thrx_s cn56xx;
+	struct cvmx_pow_wq_int_thrx_s cn56xxp1;
+	struct cvmx_pow_wq_int_thrx_s cn58xx;
+	struct cvmx_pow_wq_int_thrx_s cn58xxp1;
+};
+
+union cvmx_pow_ws_pcx {
+	uint64_t u64;
+	struct cvmx_pow_ws_pcx_s {
+		uint64_t reserved_32_63:32;
+		uint64_t ws_pc:32;
+	} s;
+	struct cvmx_pow_ws_pcx_s cn30xx;
+	struct cvmx_pow_ws_pcx_s cn31xx;
+	struct cvmx_pow_ws_pcx_s cn38xx;
+	struct cvmx_pow_ws_pcx_s cn38xxp2;
+	struct cvmx_pow_ws_pcx_s cn50xx;
+	struct cvmx_pow_ws_pcx_s cn52xx;
+	struct cvmx_pow_ws_pcx_s cn52xxp1;
+	struct cvmx_pow_ws_pcx_s cn56xx;
+	struct cvmx_pow_ws_pcx_s cn56xxp1;
+	struct cvmx_pow_ws_pcx_s cn58xx;
+	struct cvmx_pow_ws_pcx_s cn58xxp1;
+};
+
+#endif
-- 
GitLab


From 58f07778ce9d32c22cecb1d8ef348001f0e705c9 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Tue, 23 Dec 2008 15:22:14 -0800
Subject: [PATCH 115/492] MIPS: Add Cavium OCTEON processor support files to
 arch/mips/cavium-octeon/executive and asm/octeon.

These files are used to coordinate resource sharing between all of
the programs running on the OCTEON SOC.  The OCTEON processor has many
CPU cores (current parts have up to 16, but more are possible).  It
also has a variety of on-chip hardware blocks for things like network
acceleration, encryption and RAID.

One typical configuration is to run Linux on several of the CPU cores,
and other dedicated applications on the other cores.

Resource allocation between the various programs running on the system
(Linux kernel and other dedicated applications) needs to be
coordinated.  The code we use to do this we call the 'executive'.  All
of this resource allocation and sharing code is gathered together in
the executive directory.

Included in the patch set are the following files:

cvmx-bootmem.c and cvmx-sysinfo.c -- Coordinate memory allocation.
All memory used by the Linux kernel is obtained here at boot time.

cvmx-l2c.c -- Coordinates operations on the shared level 2 cache.

octeon-model.c  -- Probes chip capabilities and version.

The corresponding headers are in asm/octeon.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/cavium-octeon/executive/Makefile
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-bootmem.c
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-l2c.c
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
 create mode 100644 arch/mips/cavium-octeon/executive/octeon-model.c
 create mode 100644 arch/mips/include/asm/octeon/cvmx-asm.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-bootinfo.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-bootmem.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-l2c.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-packet.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-spinlock.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-sysinfo.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx.h
 create mode 100644 arch/mips/include/asm/octeon/octeon-feature.h
 create mode 100644 arch/mips/include/asm/octeon/octeon-model.h
---
 arch/mips/cavium-octeon/executive/Makefile    |  13 +
 .../cavium-octeon/executive/cvmx-bootmem.c    | 586 ++++++++++++++
 arch/mips/cavium-octeon/executive/cvmx-l2c.c  | 734 ++++++++++++++++++
 .../cavium-octeon/executive/cvmx-sysinfo.c    | 116 +++
 .../cavium-octeon/executive/octeon-model.c    | 358 +++++++++
 arch/mips/include/asm/octeon/cvmx-asm.h       | 128 +++
 arch/mips/include/asm/octeon/cvmx-bootinfo.h  | 262 +++++++
 arch/mips/include/asm/octeon/cvmx-bootmem.h   | 288 +++++++
 arch/mips/include/asm/octeon/cvmx-l2c.h       | 325 ++++++++
 arch/mips/include/asm/octeon/cvmx-packet.h    |  61 ++
 arch/mips/include/asm/octeon/cvmx-spinlock.h  | 232 ++++++
 arch/mips/include/asm/octeon/cvmx-sysinfo.h   | 152 ++++
 arch/mips/include/asm/octeon/cvmx.h           | 505 ++++++++++++
 arch/mips/include/asm/octeon/octeon-feature.h | 119 +++
 arch/mips/include/asm/octeon/octeon-model.h   | 321 ++++++++
 15 files changed, 4200 insertions(+)
 create mode 100644 arch/mips/cavium-octeon/executive/Makefile
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-bootmem.c
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-l2c.c
 create mode 100644 arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
 create mode 100644 arch/mips/cavium-octeon/executive/octeon-model.c
 create mode 100644 arch/mips/include/asm/octeon/cvmx-asm.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-bootinfo.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-bootmem.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-l2c.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-packet.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-spinlock.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx-sysinfo.h
 create mode 100644 arch/mips/include/asm/octeon/cvmx.h
 create mode 100644 arch/mips/include/asm/octeon/octeon-feature.h
 create mode 100644 arch/mips/include/asm/octeon/octeon-model.h

diff --git a/arch/mips/cavium-octeon/executive/Makefile b/arch/mips/cavium-octeon/executive/Makefile
new file mode 100644
index 00000000000..80d6cb26766
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/Makefile
@@ -0,0 +1,13 @@
+#
+# Makefile for the Cavium Octeon specific kernel interface routines
+# under Linux.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2005-2008 Cavium Networks
+#
+
+obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o
+
diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
new file mode 100644
index 00000000000..4f5a08b37cc
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c
@@ -0,0 +1,586 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * Simple allocate only memory allocator.  Used to allocate memory at
+ * application start time.
+ */
+
+#include <linux/kernel.h>
+
+#include <asm/octeon/cvmx.h>
+#include <asm/octeon/cvmx-spinlock.h>
+#include <asm/octeon/cvmx-bootmem.h>
+
+/*#define DEBUG */
+
+
+static struct cvmx_bootmem_desc *cvmx_bootmem_desc;
+
+/* See header file for descriptions of functions */
+
+/*
+ * Wrapper functions are provided for reading/writing the size and
+ * next block values as these may not be directly addressible (in 32
+ * bit applications, for instance.)  Offsets of data elements in
+ * bootmem list, must match cvmx_bootmem_block_header_t.
+ */
+#define NEXT_OFFSET 0
+#define SIZE_OFFSET 8
+
+static void cvmx_bootmem_phy_set_size(uint64_t addr, uint64_t size)
+{
+	cvmx_write64_uint64((addr + SIZE_OFFSET) | (1ull << 63), size);
+}
+
+static void cvmx_bootmem_phy_set_next(uint64_t addr, uint64_t next)
+{
+	cvmx_write64_uint64((addr + NEXT_OFFSET) | (1ull << 63), next);
+}
+
+static uint64_t cvmx_bootmem_phy_get_size(uint64_t addr)
+{
+	return cvmx_read64_uint64((addr + SIZE_OFFSET) | (1ull << 63));
+}
+
+static uint64_t cvmx_bootmem_phy_get_next(uint64_t addr)
+{
+	return cvmx_read64_uint64((addr + NEXT_OFFSET) | (1ull << 63));
+}
+
+void *cvmx_bootmem_alloc_range(uint64_t size, uint64_t alignment,
+			       uint64_t min_addr, uint64_t max_addr)
+{
+	int64_t address;
+	address =
+	    cvmx_bootmem_phy_alloc(size, min_addr, max_addr, alignment, 0);
+
+	if (address > 0)
+		return cvmx_phys_to_ptr(address);
+	else
+		return NULL;
+}
+
+void *cvmx_bootmem_alloc_address(uint64_t size, uint64_t address,
+				 uint64_t alignment)
+{
+	return cvmx_bootmem_alloc_range(size, alignment, address,
+					address + size);
+}
+
+void *cvmx_bootmem_alloc(uint64_t size, uint64_t alignment)
+{
+	return cvmx_bootmem_alloc_range(size, alignment, 0, 0);
+}
+
+int cvmx_bootmem_free_named(char *name)
+{
+	return cvmx_bootmem_phy_named_block_free(name, 0);
+}
+
+struct cvmx_bootmem_named_block_desc *cvmx_bootmem_find_named_block(char *name)
+{
+	return cvmx_bootmem_phy_named_block_find(name, 0);
+}
+
+void cvmx_bootmem_lock(void)
+{
+	cvmx_spinlock_lock((cvmx_spinlock_t *) &(cvmx_bootmem_desc->lock));
+}
+
+void cvmx_bootmem_unlock(void)
+{
+	cvmx_spinlock_unlock((cvmx_spinlock_t *) &(cvmx_bootmem_desc->lock));
+}
+
+int cvmx_bootmem_init(void *mem_desc_ptr)
+{
+	/* Here we set the global pointer to the bootmem descriptor
+	 * block.  This pointer will be used directly, so we will set
+	 * it up to be directly usable by the application.  It is set
+	 * up as follows for the various runtime/ABI combinations:
+	 *
+	 * Linux 64 bit: Set XKPHYS bit
+	 * Linux 32 bit: use mmap to create mapping, use virtual address
+	 * CVMX 64 bit:  use physical address directly
+	 * CVMX 32 bit:  use physical address directly
+	 *
+	 * Note that the CVMX environment assumes the use of 1-1 TLB
+	 * mappings so that the physical addresses can be used
+	 * directly
+	 */
+	if (!cvmx_bootmem_desc) {
+#if   defined(CVMX_ABI_64)
+		/* Set XKPHYS bit */
+		cvmx_bootmem_desc = cvmx_phys_to_ptr(CAST64(mem_desc_ptr));
+#else
+		cvmx_bootmem_desc = (struct cvmx_bootmem_desc *) mem_desc_ptr;
+#endif
+	}
+
+	return 0;
+}
+
+/*
+ * The cvmx_bootmem_phy* functions below return 64 bit physical
+ * addresses, and expose more features that the cvmx_bootmem_functions
+ * above.  These are required for full memory space access in 32 bit
+ * applications, as well as for using some advance features.  Most
+ * applications should not need to use these.
+ */
+
+int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
+			       uint64_t address_max, uint64_t alignment,
+			       uint32_t flags)
+{
+
+	uint64_t head_addr;
+	uint64_t ent_addr;
+	/* points to previous list entry, NULL current entry is head of list */
+	uint64_t prev_addr = 0;
+	uint64_t new_ent_addr = 0;
+	uint64_t desired_min_addr;
+
+#ifdef DEBUG
+	cvmx_dprintf("cvmx_bootmem_phy_alloc: req_size: 0x%llx, "
+		     "min_addr: 0x%llx, max_addr: 0x%llx, align: 0x%llx\n",
+		     (unsigned long long)req_size,
+		     (unsigned long long)address_min,
+		     (unsigned long long)address_max,
+		     (unsigned long long)alignment);
+#endif
+
+	if (cvmx_bootmem_desc->major_version > 3) {
+		cvmx_dprintf("ERROR: Incompatible bootmem descriptor "
+			     "version: %d.%d at addr: %p\n",
+			     (int)cvmx_bootmem_desc->major_version,
+			     (int)cvmx_bootmem_desc->minor_version,
+			     cvmx_bootmem_desc);
+		goto error_out;
+	}
+
+	/*
+	 * Do a variety of checks to validate the arguments.  The
+	 * allocator code will later assume that these checks have
+	 * been made.  We validate that the requested constraints are
+	 * not self-contradictory before we look through the list of
+	 * available memory.
+	 */
+
+	/* 0 is not a valid req_size for this allocator */
+	if (!req_size)
+		goto error_out;
+
+	/* Round req_size up to mult of minimum alignment bytes */
+	req_size = (req_size + (CVMX_BOOTMEM_ALIGNMENT_SIZE - 1)) &
+		~(CVMX_BOOTMEM_ALIGNMENT_SIZE - 1);
+
+	/*
+	 * Convert !0 address_min and 0 address_max to special case of
+	 * range that specifies an exact memory block to allocate.  Do
+	 * this before other checks and adjustments so that this
+	 * tranformation will be validated.
+	 */
+	if (address_min && !address_max)
+		address_max = address_min + req_size;
+	else if (!address_min && !address_max)
+		address_max = ~0ull;  /* If no limits given, use max limits */
+
+
+	/*
+	 * Enforce minimum alignment (this also keeps the minimum free block
+	 * req_size the same as the alignment req_size.
+	 */
+	if (alignment < CVMX_BOOTMEM_ALIGNMENT_SIZE)
+		alignment = CVMX_BOOTMEM_ALIGNMENT_SIZE;
+
+	/*
+	 * Adjust address minimum based on requested alignment (round
+	 * up to meet alignment).  Do this here so we can reject
+	 * impossible requests up front. (NOP for address_min == 0)
+	 */
+	if (alignment)
+		address_min = __ALIGN_MASK(address_min, (alignment - 1));
+
+	/*
+	 * Reject inconsistent args.  We have adjusted these, so this
+	 * may fail due to our internal changes even if this check
+	 * would pass for the values the user supplied.
+	 */
+	if (req_size > address_max - address_min)
+		goto error_out;
+
+	/* Walk through the list entries - first fit found is returned */
+
+	if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
+		cvmx_bootmem_lock();
+	head_addr = cvmx_bootmem_desc->head_addr;
+	ent_addr = head_addr;
+	for (; ent_addr;
+	     prev_addr = ent_addr,
+	     ent_addr = cvmx_bootmem_phy_get_next(ent_addr)) {
+		uint64_t usable_base, usable_max;
+		uint64_t ent_size = cvmx_bootmem_phy_get_size(ent_addr);
+
+		if (cvmx_bootmem_phy_get_next(ent_addr)
+		    && ent_addr > cvmx_bootmem_phy_get_next(ent_addr)) {
+			cvmx_dprintf("Internal bootmem_alloc() error: ent: "
+				"0x%llx, next: 0x%llx\n",
+				(unsigned long long)ent_addr,
+				(unsigned long long)
+				cvmx_bootmem_phy_get_next(ent_addr));
+			goto error_out;
+		}
+
+		/*
+		 * Determine if this is an entry that can satisify the
+		 * request Check to make sure entry is large enough to
+		 * satisfy request.
+		 */
+		usable_base =
+		    __ALIGN_MASK(max(address_min, ent_addr), alignment - 1);
+		usable_max = min(address_max, ent_addr + ent_size);
+		/*
+		 * We should be able to allocate block at address
+		 * usable_base.
+		 */
+
+		desired_min_addr = usable_base;
+		/*
+		 * Determine if request can be satisfied from the
+		 * current entry.
+		 */
+		if (!((ent_addr + ent_size) > usable_base
+				&& ent_addr < address_max
+				&& req_size <= usable_max - usable_base))
+			continue;
+		/*
+		 * We have found an entry that has room to satisfy the
+		 * request, so allocate it from this entry.  If end
+		 * CVMX_BOOTMEM_FLAG_END_ALLOC set, then allocate from
+		 * the end of this block rather than the beginning.
+		 */
+		if (flags & CVMX_BOOTMEM_FLAG_END_ALLOC) {
+			desired_min_addr = usable_max - req_size;
+			/*
+			 * Align desired address down to required
+			 * alignment.
+			 */
+			desired_min_addr &= ~(alignment - 1);
+		}
+
+		/* Match at start of entry */
+		if (desired_min_addr == ent_addr) {
+			if (req_size < ent_size) {
+				/*
+				 * big enough to create a new block
+				 * from top portion of block.
+				 */
+				new_ent_addr = ent_addr + req_size;
+				cvmx_bootmem_phy_set_next(new_ent_addr,
+					cvmx_bootmem_phy_get_next(ent_addr));
+				cvmx_bootmem_phy_set_size(new_ent_addr,
+							ent_size -
+							req_size);
+
+				/*
+				 * Adjust next pointer as following
+				 * code uses this.
+				 */
+				cvmx_bootmem_phy_set_next(ent_addr,
+							new_ent_addr);
+			}
+
+			/*
+			 * adjust prev ptr or head to remove this
+			 * entry from list.
+			 */
+			if (prev_addr)
+				cvmx_bootmem_phy_set_next(prev_addr,
+					cvmx_bootmem_phy_get_next(ent_addr));
+			else
+				/*
+				 * head of list being returned, so
+				 * update head ptr.
+				 */
+				cvmx_bootmem_desc->head_addr =
+					cvmx_bootmem_phy_get_next(ent_addr);
+
+			if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
+				cvmx_bootmem_unlock();
+			return desired_min_addr;
+		}
+		/*
+		 * block returned doesn't start at beginning of entry,
+		 * so we know that we will be splitting a block off
+		 * the front of this one.  Create a new block from the
+		 * beginning, add to list, and go to top of loop
+		 * again.
+		 *
+		 * create new block from high portion of
+		 * block, so that top block starts at desired
+		 * addr.
+		 */
+		new_ent_addr = desired_min_addr;
+		cvmx_bootmem_phy_set_next(new_ent_addr,
+					cvmx_bootmem_phy_get_next
+					(ent_addr));
+		cvmx_bootmem_phy_set_size(new_ent_addr,
+					cvmx_bootmem_phy_get_size
+					(ent_addr) -
+					(desired_min_addr -
+						ent_addr));
+		cvmx_bootmem_phy_set_size(ent_addr,
+					desired_min_addr - ent_addr);
+		cvmx_bootmem_phy_set_next(ent_addr, new_ent_addr);
+		/* Loop again to handle actual alloc from new block */
+	}
+error_out:
+	/* We didn't find anything, so return error */
+	if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
+		cvmx_bootmem_unlock();
+	return -1;
+}
+
+int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags)
+{
+	uint64_t cur_addr;
+	uint64_t prev_addr = 0;	/* zero is invalid */
+	int retval = 0;
+
+#ifdef DEBUG
+	cvmx_dprintf("__cvmx_bootmem_phy_free addr: 0x%llx, size: 0x%llx\n",
+		     (unsigned long long)phy_addr, (unsigned long long)size);
+#endif
+	if (cvmx_bootmem_desc->major_version > 3) {
+		cvmx_dprintf("ERROR: Incompatible bootmem descriptor "
+			     "version: %d.%d at addr: %p\n",
+			     (int)cvmx_bootmem_desc->major_version,
+			     (int)cvmx_bootmem_desc->minor_version,
+			     cvmx_bootmem_desc);
+		return 0;
+	}
+
+	/* 0 is not a valid size for this allocator */
+	if (!size)
+		return 0;
+
+	if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
+		cvmx_bootmem_lock();
+	cur_addr = cvmx_bootmem_desc->head_addr;
+	if (cur_addr == 0 || phy_addr < cur_addr) {
+		/* add at front of list - special case with changing head ptr */
+		if (cur_addr && phy_addr + size > cur_addr)
+			goto bootmem_free_done;	/* error, overlapping section */
+		else if (phy_addr + size == cur_addr) {
+			/* Add to front of existing first block */
+			cvmx_bootmem_phy_set_next(phy_addr,
+						  cvmx_bootmem_phy_get_next
+						  (cur_addr));
+			cvmx_bootmem_phy_set_size(phy_addr,
+						  cvmx_bootmem_phy_get_size
+						  (cur_addr) + size);
+			cvmx_bootmem_desc->head_addr = phy_addr;
+
+		} else {
+			/* New block before first block.  OK if cur_addr is 0 */
+			cvmx_bootmem_phy_set_next(phy_addr, cur_addr);
+			cvmx_bootmem_phy_set_size(phy_addr, size);
+			cvmx_bootmem_desc->head_addr = phy_addr;
+		}
+		retval = 1;
+		goto bootmem_free_done;
+	}
+
+	/* Find place in list to add block */
+	while (cur_addr && phy_addr > cur_addr) {
+		prev_addr = cur_addr;
+		cur_addr = cvmx_bootmem_phy_get_next(cur_addr);
+	}
+
+	if (!cur_addr) {
+		/*
+		 * We have reached the end of the list, add on to end,
+		 * checking to see if we need to combine with last
+		 * block
+		 */
+		if (prev_addr + cvmx_bootmem_phy_get_size(prev_addr) ==
+		    phy_addr) {
+			cvmx_bootmem_phy_set_size(prev_addr,
+						  cvmx_bootmem_phy_get_size
+						  (prev_addr) + size);
+		} else {
+			cvmx_bootmem_phy_set_next(prev_addr, phy_addr);
+			cvmx_bootmem_phy_set_size(phy_addr, size);
+			cvmx_bootmem_phy_set_next(phy_addr, 0);
+		}
+		retval = 1;
+		goto bootmem_free_done;
+	} else {
+		/*
+		 * insert between prev and cur nodes, checking for
+		 * merge with either/both.
+		 */
+		if (prev_addr + cvmx_bootmem_phy_get_size(prev_addr) ==
+		    phy_addr) {
+			/* Merge with previous */
+			cvmx_bootmem_phy_set_size(prev_addr,
+						  cvmx_bootmem_phy_get_size
+						  (prev_addr) + size);
+			if (phy_addr + size == cur_addr) {
+				/* Also merge with current */
+				cvmx_bootmem_phy_set_size(prev_addr,
+					cvmx_bootmem_phy_get_size(cur_addr) +
+					cvmx_bootmem_phy_get_size(prev_addr));
+				cvmx_bootmem_phy_set_next(prev_addr,
+					cvmx_bootmem_phy_get_next(cur_addr));
+			}
+			retval = 1;
+			goto bootmem_free_done;
+		} else if (phy_addr + size == cur_addr) {
+			/* Merge with current */
+			cvmx_bootmem_phy_set_size(phy_addr,
+						  cvmx_bootmem_phy_get_size
+						  (cur_addr) + size);
+			cvmx_bootmem_phy_set_next(phy_addr,
+						  cvmx_bootmem_phy_get_next
+						  (cur_addr));
+			cvmx_bootmem_phy_set_next(prev_addr, phy_addr);
+			retval = 1;
+			goto bootmem_free_done;
+		}
+
+		/* It is a standalone block, add in between prev and cur */
+		cvmx_bootmem_phy_set_size(phy_addr, size);
+		cvmx_bootmem_phy_set_next(phy_addr, cur_addr);
+		cvmx_bootmem_phy_set_next(prev_addr, phy_addr);
+
+	}
+	retval = 1;
+
+bootmem_free_done:
+	if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
+		cvmx_bootmem_unlock();
+	return retval;
+
+}
+
+struct cvmx_bootmem_named_block_desc *
+	cvmx_bootmem_phy_named_block_find(char *name, uint32_t flags)
+{
+	unsigned int i;
+	struct cvmx_bootmem_named_block_desc *named_block_array_ptr;
+
+#ifdef DEBUG
+	cvmx_dprintf("cvmx_bootmem_phy_named_block_find: %s\n", name);
+#endif
+	/*
+	 * Lock the structure to make sure that it is not being
+	 * changed while we are examining it.
+	 */
+	if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
+		cvmx_bootmem_lock();
+
+	/* Use XKPHYS for 64 bit linux */
+	named_block_array_ptr = (struct cvmx_bootmem_named_block_desc *)
+	    cvmx_phys_to_ptr(cvmx_bootmem_desc->named_block_array_addr);
+
+#ifdef DEBUG
+	cvmx_dprintf
+	    ("cvmx_bootmem_phy_named_block_find: named_block_array_ptr: %p\n",
+	     named_block_array_ptr);
+#endif
+	if (cvmx_bootmem_desc->major_version == 3) {
+		for (i = 0;
+		     i < cvmx_bootmem_desc->named_block_num_blocks; i++) {
+			if ((name && named_block_array_ptr[i].size
+			     && !strncmp(name, named_block_array_ptr[i].name,
+					 cvmx_bootmem_desc->named_block_name_len
+					 - 1))
+			    || (!name && !named_block_array_ptr[i].size)) {
+				if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
+					cvmx_bootmem_unlock();
+
+				return &(named_block_array_ptr[i]);
+			}
+		}
+	} else {
+		cvmx_dprintf("ERROR: Incompatible bootmem descriptor "
+			     "version: %d.%d at addr: %p\n",
+			     (int)cvmx_bootmem_desc->major_version,
+			     (int)cvmx_bootmem_desc->minor_version,
+			     cvmx_bootmem_desc);
+	}
+	if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
+		cvmx_bootmem_unlock();
+
+	return NULL;
+}
+
+int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags)
+{
+	struct cvmx_bootmem_named_block_desc *named_block_ptr;
+
+	if (cvmx_bootmem_desc->major_version != 3) {
+		cvmx_dprintf("ERROR: Incompatible bootmem descriptor version: "
+			     "%d.%d at addr: %p\n",
+			     (int)cvmx_bootmem_desc->major_version,
+			     (int)cvmx_bootmem_desc->minor_version,
+			     cvmx_bootmem_desc);
+		return 0;
+	}
+#ifdef DEBUG
+	cvmx_dprintf("cvmx_bootmem_phy_named_block_free: %s\n", name);
+#endif
+
+	/*
+	 * Take lock here, as name lookup/block free/name free need to
+	 * be atomic.
+	 */
+	cvmx_bootmem_lock();
+
+	named_block_ptr =
+	    cvmx_bootmem_phy_named_block_find(name,
+					      CVMX_BOOTMEM_FLAG_NO_LOCKING);
+	if (named_block_ptr) {
+#ifdef DEBUG
+		cvmx_dprintf("cvmx_bootmem_phy_named_block_free: "
+			     "%s, base: 0x%llx, size: 0x%llx\n",
+			     name,
+			     (unsigned long long)named_block_ptr->base_addr,
+			     (unsigned long long)named_block_ptr->size);
+#endif
+		__cvmx_bootmem_phy_free(named_block_ptr->base_addr,
+					named_block_ptr->size,
+					CVMX_BOOTMEM_FLAG_NO_LOCKING);
+		named_block_ptr->size = 0;
+		/* Set size to zero to indicate block not used. */
+	}
+
+	cvmx_bootmem_unlock();
+	return named_block_ptr != NULL;	/* 0 on failure, 1 on success */
+}
diff --git a/arch/mips/cavium-octeon/executive/cvmx-l2c.c b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
new file mode 100644
index 00000000000..6abe56f1e09
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/cvmx-l2c.c
@@ -0,0 +1,734 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * Implementation of the Level 2 Cache (L2C) control, measurement, and
+ * debugging facilities.
+ */
+
+#include <asm/octeon/cvmx.h>
+#include <asm/octeon/cvmx-l2c.h>
+#include <asm/octeon/cvmx-spinlock.h>
+
+/*
+ * This spinlock is used internally to ensure that only one core is
+ * performing certain L2 operations at a time.
+ *
+ * NOTE: This only protects calls from within a single application -
+ * if multiple applications or operating systems are running, then it
+ * is up to the user program to coordinate between them.
+ */
+static cvmx_spinlock_t cvmx_l2c_spinlock;
+
+static inline int l2_size_half(void)
+{
+	uint64_t val = cvmx_read_csr(CVMX_L2D_FUS3);
+	return !!(val & (1ull << 34));
+}
+
+int cvmx_l2c_get_core_way_partition(uint32_t core)
+{
+	uint32_t field;
+
+	/* Validate the core number */
+	if (core >= cvmx_octeon_num_cores())
+		return -1;
+
+	/*
+	 * Use the lower two bits of the coreNumber to determine the
+	 * bit offset of the UMSK[] field in the L2C_SPAR register.
+	 */
+	field = (core & 0x3) * 8;
+
+	/*
+	 * Return the UMSK[] field from the appropriate L2C_SPAR
+	 * register based on the coreNumber.
+	 */
+
+	switch (core & 0xC) {
+	case 0x0:
+		return (cvmx_read_csr(CVMX_L2C_SPAR0) & (0xFF << field)) >>
+			field;
+	case 0x4:
+		return (cvmx_read_csr(CVMX_L2C_SPAR1) & (0xFF << field)) >>
+			field;
+	case 0x8:
+		return (cvmx_read_csr(CVMX_L2C_SPAR2) & (0xFF << field)) >>
+			field;
+	case 0xC:
+		return (cvmx_read_csr(CVMX_L2C_SPAR3) & (0xFF << field)) >>
+			field;
+	}
+	return 0;
+}
+
+int cvmx_l2c_set_core_way_partition(uint32_t core, uint32_t mask)
+{
+	uint32_t field;
+	uint32_t valid_mask;
+
+	valid_mask = (0x1 << cvmx_l2c_get_num_assoc()) - 1;
+
+	mask &= valid_mask;
+
+	/* A UMSK setting which blocks all L2C Ways is an error. */
+	if (mask == valid_mask)
+		return -1;
+
+	/* Validate the core number */
+	if (core >= cvmx_octeon_num_cores())
+		return -1;
+
+	/* Check to make sure current mask & new mask don't block all ways */
+	if (((mask | cvmx_l2c_get_core_way_partition(core)) & valid_mask) ==
+	    valid_mask)
+		return -1;
+
+	/* Use the lower two bits of core to determine the bit offset of the
+	 * UMSK[] field in the L2C_SPAR register.
+	 */
+	field = (core & 0x3) * 8;
+
+	/* Assign the new mask setting to the UMSK[] field in the appropriate
+	 * L2C_SPAR register based on the core_num.
+	 *
+	 */
+	switch (core & 0xC) {
+	case 0x0:
+		cvmx_write_csr(CVMX_L2C_SPAR0,
+			       (cvmx_read_csr(CVMX_L2C_SPAR0) &
+				~(0xFF << field)) | mask << field);
+		break;
+	case 0x4:
+		cvmx_write_csr(CVMX_L2C_SPAR1,
+			       (cvmx_read_csr(CVMX_L2C_SPAR1) &
+				~(0xFF << field)) | mask << field);
+		break;
+	case 0x8:
+		cvmx_write_csr(CVMX_L2C_SPAR2,
+			       (cvmx_read_csr(CVMX_L2C_SPAR2) &
+				~(0xFF << field)) | mask << field);
+		break;
+	case 0xC:
+		cvmx_write_csr(CVMX_L2C_SPAR3,
+			       (cvmx_read_csr(CVMX_L2C_SPAR3) &
+				~(0xFF << field)) | mask << field);
+		break;
+	}
+	return 0;
+}
+
+int cvmx_l2c_set_hw_way_partition(uint32_t mask)
+{
+	uint32_t valid_mask;
+
+	valid_mask = 0xff;
+
+	if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN38XX)) {
+		if (l2_size_half())
+			valid_mask = 0xf;
+	} else if (l2_size_half())
+		valid_mask = 0x3;
+
+	mask &= valid_mask;
+
+	/* A UMSK setting which blocks all L2C Ways is an error. */
+	if (mask == valid_mask)
+		return -1;
+	/* Check to make sure current mask & new mask don't block all ways */
+	if (((mask | cvmx_l2c_get_hw_way_partition()) & valid_mask) ==
+	    valid_mask)
+		return -1;
+
+	cvmx_write_csr(CVMX_L2C_SPAR4,
+		       (cvmx_read_csr(CVMX_L2C_SPAR4) & ~0xFF) | mask);
+	return 0;
+}
+
+int cvmx_l2c_get_hw_way_partition(void)
+{
+	return cvmx_read_csr(CVMX_L2C_SPAR4) & (0xFF);
+}
+
+void cvmx_l2c_config_perf(uint32_t counter, enum cvmx_l2c_event event,
+			  uint32_t clear_on_read)
+{
+	union cvmx_l2c_pfctl pfctl;
+
+	pfctl.u64 = cvmx_read_csr(CVMX_L2C_PFCTL);
+
+	switch (counter) {
+	case 0:
+		pfctl.s.cnt0sel = event;
+		pfctl.s.cnt0ena = 1;
+		if (!cvmx_octeon_is_pass1())
+			pfctl.s.cnt0rdclr = clear_on_read;
+		break;
+	case 1:
+		pfctl.s.cnt1sel = event;
+		pfctl.s.cnt1ena = 1;
+		if (!cvmx_octeon_is_pass1())
+			pfctl.s.cnt1rdclr = clear_on_read;
+		break;
+	case 2:
+		pfctl.s.cnt2sel = event;
+		pfctl.s.cnt2ena = 1;
+		if (!cvmx_octeon_is_pass1())
+			pfctl.s.cnt2rdclr = clear_on_read;
+		break;
+	case 3:
+	default:
+		pfctl.s.cnt3sel = event;
+		pfctl.s.cnt3ena = 1;
+		if (!cvmx_octeon_is_pass1())
+			pfctl.s.cnt3rdclr = clear_on_read;
+		break;
+	}
+
+	cvmx_write_csr(CVMX_L2C_PFCTL, pfctl.u64);
+}
+
+uint64_t cvmx_l2c_read_perf(uint32_t counter)
+{
+	switch (counter) {
+	case 0:
+		return cvmx_read_csr(CVMX_L2C_PFC0);
+	case 1:
+		return cvmx_read_csr(CVMX_L2C_PFC1);
+	case 2:
+		return cvmx_read_csr(CVMX_L2C_PFC2);
+	case 3:
+	default:
+		return cvmx_read_csr(CVMX_L2C_PFC3);
+	}
+}
+
+/**
+ * @INTERNAL
+ * Helper function use to fault in cache lines for L2 cache locking
+ *
+ * @addr:   Address of base of memory region to read into L2 cache
+ * @len:    Length (in bytes) of region to fault in
+ */
+static void fault_in(uint64_t addr, int len)
+{
+	volatile char *ptr;
+	volatile char dummy;
+	/*
+	 * Adjust addr and length so we get all cache lines even for
+	 * small ranges spanning two cache lines
+	 */
+	len += addr & CVMX_CACHE_LINE_MASK;
+	addr &= ~CVMX_CACHE_LINE_MASK;
+	ptr = (volatile char *)cvmx_phys_to_ptr(addr);
+	/*
+	 * Invalidate L1 cache to make sure all loads result in data
+	 * being in L2.
+	 */
+	CVMX_DCACHE_INVALIDATE;
+	while (len > 0) {
+		dummy += *ptr;
+		len -= CVMX_CACHE_LINE_SIZE;
+		ptr += CVMX_CACHE_LINE_SIZE;
+	}
+}
+
+int cvmx_l2c_lock_line(uint64_t addr)
+{
+	int retval = 0;
+	union cvmx_l2c_dbg l2cdbg;
+	union cvmx_l2c_lckbase lckbase;
+	union cvmx_l2c_lckoff lckoff;
+	union cvmx_l2t_err l2t_err;
+	l2cdbg.u64 = 0;
+	lckbase.u64 = 0;
+	lckoff.u64 = 0;
+
+	cvmx_spinlock_lock(&cvmx_l2c_spinlock);
+
+	/* Clear l2t error bits if set */
+	l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR);
+	l2t_err.s.lckerr = 1;
+	l2t_err.s.lckerr2 = 1;
+	cvmx_write_csr(CVMX_L2T_ERR, l2t_err.u64);
+
+	addr &= ~CVMX_CACHE_LINE_MASK;
+
+	/* Set this core as debug core */
+	l2cdbg.s.ppnum = cvmx_get_core_num();
+	CVMX_SYNC;
+	cvmx_write_csr(CVMX_L2C_DBG, l2cdbg.u64);
+	cvmx_read_csr(CVMX_L2C_DBG);
+
+	lckoff.s.lck_offset = 0;	/* Only lock 1 line at a time */
+	cvmx_write_csr(CVMX_L2C_LCKOFF, lckoff.u64);
+	cvmx_read_csr(CVMX_L2C_LCKOFF);
+
+	if (((union cvmx_l2c_cfg) (cvmx_read_csr(CVMX_L2C_CFG))).s.idxalias) {
+		int alias_shift =
+		    CVMX_L2C_IDX_ADDR_SHIFT + 2 * CVMX_L2_SET_BITS - 1;
+		uint64_t addr_tmp =
+		    addr ^ (addr & ((1 << alias_shift) - 1)) >>
+		    CVMX_L2_SET_BITS;
+		lckbase.s.lck_base = addr_tmp >> 7;
+	} else {
+		lckbase.s.lck_base = addr >> 7;
+	}
+
+	lckbase.s.lck_ena = 1;
+	cvmx_write_csr(CVMX_L2C_LCKBASE, lckbase.u64);
+	cvmx_read_csr(CVMX_L2C_LCKBASE);	/* Make sure it gets there */
+
+	fault_in(addr, CVMX_CACHE_LINE_SIZE);
+
+	lckbase.s.lck_ena = 0;
+	cvmx_write_csr(CVMX_L2C_LCKBASE, lckbase.u64);
+	cvmx_read_csr(CVMX_L2C_LCKBASE);	/* Make sure it gets there */
+
+	/* Stop being debug core */
+	cvmx_write_csr(CVMX_L2C_DBG, 0);
+	cvmx_read_csr(CVMX_L2C_DBG);
+
+	l2t_err.u64 = cvmx_read_csr(CVMX_L2T_ERR);
+	if (l2t_err.s.lckerr || l2t_err.s.lckerr2)
+		retval = 1;	/* We were unable to lock the line */
+
+	cvmx_spinlock_unlock(&cvmx_l2c_spinlock);
+
+	return retval;
+}
+
+int cvmx_l2c_lock_mem_region(uint64_t start, uint64_t len)
+{
+	int retval = 0;
+
+	/* Round start/end to cache line boundaries */
+	len += start & CVMX_CACHE_LINE_MASK;
+	start &= ~CVMX_CACHE_LINE_MASK;
+	len = (len + CVMX_CACHE_LINE_MASK) & ~CVMX_CACHE_LINE_MASK;
+
+	while (len) {
+		retval += cvmx_l2c_lock_line(start);
+		start += CVMX_CACHE_LINE_SIZE;
+		len -= CVMX_CACHE_LINE_SIZE;
+	}
+
+	return retval;
+}
+
+void cvmx_l2c_flush(void)
+{
+	uint64_t assoc, set;
+	uint64_t n_assoc, n_set;
+	union cvmx_l2c_dbg l2cdbg;
+
+	cvmx_spinlock_lock(&cvmx_l2c_spinlock);
+
+	l2cdbg.u64 = 0;
+	if (!OCTEON_IS_MODEL(OCTEON_CN30XX))
+		l2cdbg.s.ppnum = cvmx_get_core_num();
+	l2cdbg.s.finv = 1;
+	n_set = CVMX_L2_SETS;
+	n_assoc = l2_size_half() ? (CVMX_L2_ASSOC / 2) : CVMX_L2_ASSOC;
+	for (set = 0; set < n_set; set++) {
+		for (assoc = 0; assoc < n_assoc; assoc++) {
+			l2cdbg.s.set = assoc;
+			/* Enter debug mode, and make sure all other
+			 ** writes complete before we enter debug
+			 ** mode */
+			CVMX_SYNCW;
+			cvmx_write_csr(CVMX_L2C_DBG, l2cdbg.u64);
+			cvmx_read_csr(CVMX_L2C_DBG);
+
+			CVMX_PREPARE_FOR_STORE(CVMX_ADD_SEG
+					       (CVMX_MIPS_SPACE_XKPHYS,
+						set * CVMX_CACHE_LINE_SIZE), 0);
+			CVMX_SYNCW;	/* Push STF out to L2 */
+			/* Exit debug mode */
+			CVMX_SYNC;
+			cvmx_write_csr(CVMX_L2C_DBG, 0);
+			cvmx_read_csr(CVMX_L2C_DBG);
+		}
+	}
+
+	cvmx_spinlock_unlock(&cvmx_l2c_spinlock);
+}
+
+int cvmx_l2c_unlock_line(uint64_t address)
+{
+	int assoc;
+	union cvmx_l2c_tag tag;
+	union cvmx_l2c_dbg l2cdbg;
+	uint32_t tag_addr;
+
+	uint32_t index = cvmx_l2c_address_to_index(address);
+
+	cvmx_spinlock_lock(&cvmx_l2c_spinlock);
+	/* Compute portion of address that is stored in tag */
+	tag_addr =
+	    ((address >> CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) &
+	     ((1 << CVMX_L2C_TAG_ADDR_ALIAS_SHIFT) - 1));
+	for (assoc = 0; assoc < CVMX_L2_ASSOC; assoc++) {
+		tag = cvmx_get_l2c_tag(assoc, index);
+
+		if (tag.s.V && (tag.s.addr == tag_addr)) {
+			l2cdbg.u64 = 0;
+			l2cdbg.s.ppnum = cvmx_get_core_num();
+			l2cdbg.s.set = assoc;
+			l2cdbg.s.finv = 1;
+
+			CVMX_SYNC;
+			/* Enter debug mode */
+			cvmx_write_csr(CVMX_L2C_DBG, l2cdbg.u64);
+			cvmx_read_csr(CVMX_L2C_DBG);
+
+			CVMX_PREPARE_FOR_STORE(CVMX_ADD_SEG
+					       (CVMX_MIPS_SPACE_XKPHYS,
+						address), 0);
+			CVMX_SYNC;
+			/* Exit debug mode */
+			cvmx_write_csr(CVMX_L2C_DBG, 0);
+			cvmx_read_csr(CVMX_L2C_DBG);
+			cvmx_spinlock_unlock(&cvmx_l2c_spinlock);
+			return tag.s.L;
+		}
+	}
+	cvmx_spinlock_unlock(&cvmx_l2c_spinlock);
+	return 0;
+}
+
+int cvmx_l2c_unlock_mem_region(uint64_t start, uint64_t len)
+{
+	int num_unlocked = 0;
+	/* Round start/end to cache line boundaries */
+	len += start & CVMX_CACHE_LINE_MASK;
+	start &= ~CVMX_CACHE_LINE_MASK;
+	len = (len + CVMX_CACHE_LINE_MASK) & ~CVMX_CACHE_LINE_MASK;
+	while (len > 0) {
+		num_unlocked += cvmx_l2c_unlock_line(start);
+		start += CVMX_CACHE_LINE_SIZE;
+		len -= CVMX_CACHE_LINE_SIZE;
+	}
+
+	return num_unlocked;
+}
+
+/*
+ * Internal l2c tag types.  These are converted to a generic structure
+ * that can be used on all chips.
+ */
+union __cvmx_l2c_tag {
+	uint64_t u64;
+	struct cvmx_l2c_tag_cn50xx {
+		uint64_t reserved:40;
+		uint64_t V:1;	/* Line valid */
+		uint64_t D:1;	/* Line dirty */
+		uint64_t L:1;	/* Line locked */
+		uint64_t U:1;	/* Use, LRU eviction */
+		uint64_t addr:20;	/* Phys mem addr (33..14) */
+	} cn50xx;
+	struct cvmx_l2c_tag_cn30xx {
+		uint64_t reserved:41;
+		uint64_t V:1;	/* Line valid */
+		uint64_t D:1;	/* Line dirty */
+		uint64_t L:1;	/* Line locked */
+		uint64_t U:1;	/* Use, LRU eviction */
+		uint64_t addr:19;	/* Phys mem addr (33..15) */
+	} cn30xx;
+	struct cvmx_l2c_tag_cn31xx {
+		uint64_t reserved:42;
+		uint64_t V:1;	/* Line valid */
+		uint64_t D:1;	/* Line dirty */
+		uint64_t L:1;	/* Line locked */
+		uint64_t U:1;	/* Use, LRU eviction */
+		uint64_t addr:18;	/* Phys mem addr (33..16) */
+	} cn31xx;
+	struct cvmx_l2c_tag_cn38xx {
+		uint64_t reserved:43;
+		uint64_t V:1;	/* Line valid */
+		uint64_t D:1;	/* Line dirty */
+		uint64_t L:1;	/* Line locked */
+		uint64_t U:1;	/* Use, LRU eviction */
+		uint64_t addr:17;	/* Phys mem addr (33..17) */
+	} cn38xx;
+	struct cvmx_l2c_tag_cn58xx {
+		uint64_t reserved:44;
+		uint64_t V:1;	/* Line valid */
+		uint64_t D:1;	/* Line dirty */
+		uint64_t L:1;	/* Line locked */
+		uint64_t U:1;	/* Use, LRU eviction */
+		uint64_t addr:16;	/* Phys mem addr (33..18) */
+	} cn58xx;
+	struct cvmx_l2c_tag_cn58xx cn56xx;	/* 2048 sets */
+	struct cvmx_l2c_tag_cn31xx cn52xx;	/* 512 sets */
+};
+
+/**
+ * @INTERNAL
+ * Function to read a L2C tag.  This code make the current core
+ * the 'debug core' for the L2.  This code must only be executed by
+ * 1 core at a time.
+ *
+ * @assoc:  Association (way) of the tag to dump
+ * @index:  Index of the cacheline
+ *
+ * Returns The Octeon model specific tag structure.  This is
+ *         translated by a wrapper function to a generic form that is
+ *         easier for applications to use.
+ */
+static union __cvmx_l2c_tag __read_l2_tag(uint64_t assoc, uint64_t index)
+{
+
+	uint64_t debug_tag_addr = (((1ULL << 63) | (index << 7)) + 96);
+	uint64_t core = cvmx_get_core_num();
+	union __cvmx_l2c_tag tag_val;
+	uint64_t dbg_addr = CVMX_L2C_DBG;
+	unsigned long flags;
+
+	union cvmx_l2c_dbg debug_val;
+	debug_val.u64 = 0;
+	/*
+	 * For low core count parts, the core number is always small enough
+	 * to stay in the correct field and not set any reserved bits.
+	 */
+	debug_val.s.ppnum = core;
+	debug_val.s.l2t = 1;
+	debug_val.s.set = assoc;
+	/*
+	 * Make sure core is quiet (no prefetches, etc.) before
+	 * entering debug mode.
+	 */
+	CVMX_SYNC;
+	/* Flush L1 to make sure debug load misses L1 */
+	CVMX_DCACHE_INVALIDATE;
+
+	local_irq_save(flags);
+
+	/*
+	 * The following must be done in assembly as when in debug
+	 * mode all data loads from L2 return special debug data, not
+	 * normal memory contents.  Also, interrupts must be
+	 * disabled, since if an interrupt occurs while in debug mode
+	 * the ISR will get debug data from all its memory reads
+	 * instead of the contents of memory
+	 */
+
+	asm volatile (".set push              \n"
+		"        .set mips64              \n"
+		"        .set noreorder           \n"
+		/* Enter debug mode, wait for store */
+		"        sd    %[dbg_val], 0(%[dbg_addr])  \n"
+		"        ld    $0, 0(%[dbg_addr]) \n"
+		/* Read L2C tag data */
+		"        ld    %[tag_val], 0(%[tag_addr]) \n"
+		/* Exit debug mode, wait for store */
+		"        sd    $0, 0(%[dbg_addr])  \n"
+		"        ld    $0, 0(%[dbg_addr]) \n"
+		/* Invalidate dcache to discard debug data */
+		"        cache 9, 0($0) \n"
+		"        .set pop" :
+		[tag_val] "=r"(tag_val.u64) : [dbg_addr] "r"(dbg_addr),
+		[dbg_val] "r"(debug_val.u64),
+		[tag_addr] "r"(debug_tag_addr) : "memory");
+
+	local_irq_restore(flags);
+	return tag_val;
+
+}
+
+union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index)
+{
+	union __cvmx_l2c_tag tmp_tag;
+	union cvmx_l2c_tag tag;
+	tag.u64 = 0;
+
+	if ((int)association >= cvmx_l2c_get_num_assoc()) {
+		cvmx_dprintf
+		    ("ERROR: cvmx_get_l2c_tag association out of range\n");
+		return tag;
+	}
+	if ((int)index >= cvmx_l2c_get_num_sets()) {
+		cvmx_dprintf("ERROR: cvmx_get_l2c_tag "
+			     "index out of range (arg: %d, max: %d\n",
+		     index, cvmx_l2c_get_num_sets());
+		return tag;
+	}
+	/* __read_l2_tag is intended for internal use only */
+	tmp_tag = __read_l2_tag(association, index);
+
+	/*
+	 * Convert all tag structure types to generic version, as it
+	 * can represent all models.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN58XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
+		tag.s.V = tmp_tag.cn58xx.V;
+		tag.s.D = tmp_tag.cn58xx.D;
+		tag.s.L = tmp_tag.cn58xx.L;
+		tag.s.U = tmp_tag.cn58xx.U;
+		tag.s.addr = tmp_tag.cn58xx.addr;
+	} else if (OCTEON_IS_MODEL(OCTEON_CN38XX)) {
+		tag.s.V = tmp_tag.cn38xx.V;
+		tag.s.D = tmp_tag.cn38xx.D;
+		tag.s.L = tmp_tag.cn38xx.L;
+		tag.s.U = tmp_tag.cn38xx.U;
+		tag.s.addr = tmp_tag.cn38xx.addr;
+	} else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
+		   || OCTEON_IS_MODEL(OCTEON_CN52XX)) {
+		tag.s.V = tmp_tag.cn31xx.V;
+		tag.s.D = tmp_tag.cn31xx.D;
+		tag.s.L = tmp_tag.cn31xx.L;
+		tag.s.U = tmp_tag.cn31xx.U;
+		tag.s.addr = tmp_tag.cn31xx.addr;
+	} else if (OCTEON_IS_MODEL(OCTEON_CN30XX)) {
+		tag.s.V = tmp_tag.cn30xx.V;
+		tag.s.D = tmp_tag.cn30xx.D;
+		tag.s.L = tmp_tag.cn30xx.L;
+		tag.s.U = tmp_tag.cn30xx.U;
+		tag.s.addr = tmp_tag.cn30xx.addr;
+	} else if (OCTEON_IS_MODEL(OCTEON_CN50XX)) {
+		tag.s.V = tmp_tag.cn50xx.V;
+		tag.s.D = tmp_tag.cn50xx.D;
+		tag.s.L = tmp_tag.cn50xx.L;
+		tag.s.U = tmp_tag.cn50xx.U;
+		tag.s.addr = tmp_tag.cn50xx.addr;
+	} else {
+		cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__);
+	}
+
+	return tag;
+}
+
+uint32_t cvmx_l2c_address_to_index(uint64_t addr)
+{
+	uint64_t idx = addr >> CVMX_L2C_IDX_ADDR_SHIFT;
+	union cvmx_l2c_cfg l2c_cfg;
+	l2c_cfg.u64 = cvmx_read_csr(CVMX_L2C_CFG);
+
+	if (l2c_cfg.s.idxalias) {
+		idx ^=
+		    ((addr & CVMX_L2C_ALIAS_MASK) >>
+		     CVMX_L2C_TAG_ADDR_ALIAS_SHIFT);
+	}
+	idx &= CVMX_L2C_IDX_MASK;
+	return idx;
+}
+
+int cvmx_l2c_get_cache_size_bytes(void)
+{
+	return cvmx_l2c_get_num_sets() * cvmx_l2c_get_num_assoc() *
+		CVMX_CACHE_LINE_SIZE;
+}
+
+/**
+ * Return log base 2 of the number of sets in the L2 cache
+ * Returns
+ */
+int cvmx_l2c_get_set_bits(void)
+{
+	int l2_set_bits;
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN58XX))
+		l2_set_bits = 11;	/* 2048 sets */
+	else if (OCTEON_IS_MODEL(OCTEON_CN38XX))
+		l2_set_bits = 10;	/* 1024 sets */
+	else if (OCTEON_IS_MODEL(OCTEON_CN31XX)
+		 || OCTEON_IS_MODEL(OCTEON_CN52XX))
+		l2_set_bits = 9;	/* 512 sets */
+	else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
+		l2_set_bits = 8;	/* 256 sets */
+	else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
+		l2_set_bits = 7;	/* 128 sets */
+	else {
+		cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__);
+		l2_set_bits = 11;	/* 2048 sets */
+	}
+	return l2_set_bits;
+
+}
+
+/* Return the number of sets in the L2 Cache */
+int cvmx_l2c_get_num_sets(void)
+{
+	return 1 << cvmx_l2c_get_set_bits();
+}
+
+/* Return the number of associations in the L2 Cache */
+int cvmx_l2c_get_num_assoc(void)
+{
+	int l2_assoc;
+	if (OCTEON_IS_MODEL(OCTEON_CN56XX) ||
+	    OCTEON_IS_MODEL(OCTEON_CN52XX) ||
+	    OCTEON_IS_MODEL(OCTEON_CN58XX) ||
+	    OCTEON_IS_MODEL(OCTEON_CN50XX) || OCTEON_IS_MODEL(OCTEON_CN38XX))
+		l2_assoc = 8;
+	else if (OCTEON_IS_MODEL(OCTEON_CN31XX) ||
+		 OCTEON_IS_MODEL(OCTEON_CN30XX))
+		l2_assoc = 4;
+	else {
+		cvmx_dprintf("Unsupported OCTEON Model in %s\n", __func__);
+		l2_assoc = 8;
+	}
+
+	/* Check to see if part of the cache is disabled */
+	if (cvmx_fuse_read(265))
+		l2_assoc = l2_assoc >> 2;
+	else if (cvmx_fuse_read(264))
+		l2_assoc = l2_assoc >> 1;
+
+	return l2_assoc;
+}
+
+/**
+ * Flush a line from the L2 cache
+ * This should only be called from one core at a time, as this routine
+ * sets the core to the 'debug' core in order to flush the line.
+ *
+ * @assoc:  Association (or way) to flush
+ * @index:  Index to flush
+ */
+void cvmx_l2c_flush_line(uint32_t assoc, uint32_t index)
+{
+	union cvmx_l2c_dbg l2cdbg;
+
+	l2cdbg.u64 = 0;
+	l2cdbg.s.ppnum = cvmx_get_core_num();
+	l2cdbg.s.finv = 1;
+
+	l2cdbg.s.set = assoc;
+	/*
+	 * Enter debug mode, and make sure all other writes complete
+	 * before we enter debug mode.
+	 */
+	asm volatile ("sync" : : : "memory");
+	cvmx_write_csr(CVMX_L2C_DBG, l2cdbg.u64);
+	cvmx_read_csr(CVMX_L2C_DBG);
+
+	CVMX_PREPARE_FOR_STORE(((1ULL << 63) + (index) * 128), 0);
+	/* Exit debug mode */
+	asm volatile ("sync" : : : "memory");
+	cvmx_write_csr(CVMX_L2C_DBG, 0);
+	cvmx_read_csr(CVMX_L2C_DBG);
+}
diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
new file mode 100644
index 00000000000..4812370706a
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c
@@ -0,0 +1,116 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * This module provides system/board/application information obtained
+ * by the bootloader.
+ */
+
+#include <asm/octeon/cvmx.h>
+#include <asm/octeon/cvmx-spinlock.h>
+#include <asm/octeon/cvmx-sysinfo.h>
+
+/**
+ * This structure defines the private state maintained by sysinfo module.
+ *
+ */
+static struct {
+	struct cvmx_sysinfo sysinfo;	   /* system information */
+	cvmx_spinlock_t lock;	   /* mutex spinlock */
+
+} state = {
+	.lock = CVMX_SPINLOCK_UNLOCKED_INITIALIZER
+};
+
+
+/*
+ * Global variables that define the min/max of the memory region set
+ * up for 32 bit userspace access.
+ */
+uint64_t linux_mem32_min;
+uint64_t linux_mem32_max;
+uint64_t linux_mem32_wired;
+uint64_t linux_mem32_offset;
+
+/**
+ * This function returns the application information as obtained
+ * by the bootloader.  This provides the core mask of the cores
+ * running the same application image, as well as the physical
+ * memory regions available to the core.
+ *
+ * Returns  Pointer to the boot information structure
+ *
+ */
+struct cvmx_sysinfo *cvmx_sysinfo_get(void)
+{
+	return &(state.sysinfo);
+}
+
+/**
+ * This function is used in non-simple executive environments (such as
+ * Linux kernel, u-boot, etc.)  to configure the minimal fields that
+ * are required to use simple executive files directly.
+ *
+ * Locking (if required) must be handled outside of this
+ * function
+ *
+ * @phy_mem_desc_ptr:
+ *                   Pointer to global physical memory descriptor
+ *                   (bootmem descriptor) @board_type: Octeon board
+ *                   type enumeration
+ *
+ * @board_rev_major:
+ *                   Board major revision
+ * @board_rev_minor:
+ *                   Board minor revision
+ * @cpu_clock_hz:
+ *                   CPU clock freqency in hertz
+ *
+ * Returns 0: Failure
+ *         1: success
+ */
+int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
+				    uint16_t board_type,
+				    uint8_t board_rev_major,
+				    uint8_t board_rev_minor,
+				    uint32_t cpu_clock_hz)
+{
+
+	/* The sysinfo structure was already initialized */
+	if (state.sysinfo.board_type)
+		return 0;
+
+	memset(&(state.sysinfo), 0x0, sizeof(state.sysinfo));
+	state.sysinfo.phy_mem_desc_ptr = phy_mem_desc_ptr;
+	state.sysinfo.board_type = board_type;
+	state.sysinfo.board_rev_major = board_rev_major;
+	state.sysinfo.board_rev_minor = board_rev_minor;
+	state.sysinfo.cpu_clock_hz = cpu_clock_hz;
+
+	return 1;
+}
+
diff --git a/arch/mips/cavium-octeon/executive/octeon-model.c b/arch/mips/cavium-octeon/executive/octeon-model.c
new file mode 100644
index 00000000000..9afc3794ed1
--- /dev/null
+++ b/arch/mips/cavium-octeon/executive/octeon-model.c
@@ -0,0 +1,358 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * File defining functions for working with different Octeon
+ * models.
+ */
+#include <asm/octeon/octeon.h>
+
+/**
+ * Given the chip processor ID from COP0, this function returns a
+ * string representing the chip model number. The string is of the
+ * form CNXXXXpX.X-FREQ-SUFFIX.
+ * - XXXX = The chip model number
+ * - X.X = Chip pass number
+ * - FREQ = Current frequency in Mhz
+ * - SUFFIX = NSP, EXP, SCP, SSP, or CP
+ *
+ * @chip_id: Chip ID
+ *
+ * Returns Model string
+ */
+const char *octeon_model_get_string(uint32_t chip_id)
+{
+	static char buffer[32];
+	return octeon_model_get_string_buffer(chip_id, buffer);
+}
+
+/*
+ * Version of octeon_model_get_string() that takes buffer as argument,
+ * as running early in u-boot static/global variables don't work when
+ * running from flash.
+ */
+const char *octeon_model_get_string_buffer(uint32_t chip_id, char *buffer)
+{
+	const char *family;
+	const char *core_model;
+	char pass[4];
+	int clock_mhz;
+	const char *suffix;
+	union cvmx_l2d_fus3 fus3;
+	int num_cores;
+	union cvmx_mio_fus_dat2 fus_dat2;
+	union cvmx_mio_fus_dat3 fus_dat3;
+	char fuse_model[10];
+	uint32_t fuse_data = 0;
+
+	fus3.u64 = cvmx_read_csr(CVMX_L2D_FUS3);
+	fus_dat2.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT2);
+	fus_dat3.u64 = cvmx_read_csr(CVMX_MIO_FUS_DAT3);
+
+	num_cores = cvmx_octeon_num_cores();
+
+	/* Make sure the non existant devices look disabled */
+	switch ((chip_id >> 8) & 0xff) {
+	case 6:		/* CN50XX */
+	case 2:		/* CN30XX */
+		fus_dat3.s.nodfa_dte = 1;
+		fus_dat3.s.nozip = 1;
+		break;
+	case 4:		/* CN57XX or CN56XX */
+		fus_dat3.s.nodfa_dte = 1;
+		break;
+	default:
+		break;
+	}
+
+	/* Make a guess at the suffix */
+	/* NSP = everything */
+	/* EXP = No crypto */
+	/* SCP = No DFA, No zip */
+	/* CP = No DFA, No crypto, No zip */
+	if (fus_dat3.s.nodfa_dte) {
+		if (fus_dat2.s.nocrypto)
+			suffix = "CP";
+		else
+			suffix = "SCP";
+	} else if (fus_dat2.s.nocrypto)
+		suffix = "EXP";
+	else
+		suffix = "NSP";
+
+	/*
+	 * Assume pass number is encoded using <5:3><2:0>. Exceptions
+	 * will be fixed later.
+	 */
+	sprintf(pass, "%u.%u", ((chip_id >> 3) & 7) + 1, chip_id & 7);
+
+	/*
+	 * Use the number of cores to determine the last 2 digits of
+	 * the model number. There are some exceptions that are fixed
+	 * later.
+	 */
+	switch (num_cores) {
+	case 16:
+		core_model = "60";
+		break;
+	case 15:
+		core_model = "58";
+		break;
+	case 14:
+		core_model = "55";
+		break;
+	case 13:
+		core_model = "52";
+		break;
+	case 12:
+		core_model = "50";
+		break;
+	case 11:
+		core_model = "48";
+		break;
+	case 10:
+		core_model = "45";
+		break;
+	case 9:
+		core_model = "42";
+		break;
+	case 8:
+		core_model = "40";
+		break;
+	case 7:
+		core_model = "38";
+		break;
+	case 6:
+		core_model = "34";
+		break;
+	case 5:
+		core_model = "32";
+		break;
+	case 4:
+		core_model = "30";
+		break;
+	case 3:
+		core_model = "25";
+		break;
+	case 2:
+		core_model = "20";
+		break;
+	case 1:
+		core_model = "10";
+		break;
+	default:
+		core_model = "XX";
+		break;
+	}
+
+	/* Now figure out the family, the first two digits */
+	switch ((chip_id >> 8) & 0xff) {
+	case 0:		/* CN38XX, CN37XX or CN36XX */
+		if (fus3.cn38xx.crip_512k) {
+			/*
+			 * For some unknown reason, the 16 core one is
+			 * called 37 instead of 36.
+			 */
+			if (num_cores >= 16)
+				family = "37";
+			else
+				family = "36";
+		} else
+			family = "38";
+		/*
+		 * This series of chips didn't follow the standard
+		 * pass numbering.
+		 */
+		switch (chip_id & 0xf) {
+		case 0:
+			strcpy(pass, "1.X");
+			break;
+		case 1:
+			strcpy(pass, "2.X");
+			break;
+		case 3:
+			strcpy(pass, "3.X");
+			break;
+		default:
+			strcpy(pass, "X.X");
+			break;
+		}
+		break;
+	case 1:		/* CN31XX or CN3020 */
+		if ((chip_id & 0x10) || fus3.cn31xx.crip_128k)
+			family = "30";
+		else
+			family = "31";
+		/*
+		 * This series of chips didn't follow the standard
+		 * pass numbering.
+		 */
+		switch (chip_id & 0xf) {
+		case 0:
+			strcpy(pass, "1.0");
+			break;
+		case 2:
+			strcpy(pass, "1.1");
+			break;
+		default:
+			strcpy(pass, "X.X");
+			break;
+		}
+		break;
+	case 2:		/* CN3010 or CN3005 */
+		family = "30";
+		/* A chip with half cache is an 05 */
+		if (fus3.cn30xx.crip_64k)
+			core_model = "05";
+		/*
+		 * This series of chips didn't follow the standard
+		 * pass numbering.
+		 */
+		switch (chip_id & 0xf) {
+		case 0:
+			strcpy(pass, "1.0");
+			break;
+		case 2:
+			strcpy(pass, "1.1");
+			break;
+		default:
+			strcpy(pass, "X.X");
+			break;
+		}
+		break;
+	case 3:		/* CN58XX */
+		family = "58";
+		/* Special case. 4 core, no crypto */
+		if ((num_cores == 4) && fus_dat2.cn38xx.nocrypto)
+			core_model = "29";
+
+		/* Pass 1 uses different encodings for pass numbers */
+		if ((chip_id & 0xFF) < 0x8) {
+			switch (chip_id & 0x3) {
+			case 0:
+				strcpy(pass, "1.0");
+				break;
+			case 1:
+				strcpy(pass, "1.1");
+				break;
+			case 3:
+				strcpy(pass, "1.2");
+				break;
+			default:
+				strcpy(pass, "1.X");
+				break;
+			}
+		}
+		break;
+	case 4:		/* CN57XX, CN56XX, CN55XX, CN54XX */
+		if (fus_dat2.cn56xx.raid_en) {
+			if (fus3.cn56xx.crip_1024k)
+				family = "55";
+			else
+				family = "57";
+			if (fus_dat2.cn56xx.nocrypto)
+				suffix = "SP";
+			else
+				suffix = "SSP";
+		} else {
+			if (fus_dat2.cn56xx.nocrypto)
+				suffix = "CP";
+			else {
+				suffix = "NSP";
+				if (fus_dat3.s.nozip)
+					suffix = "SCP";
+			}
+			if (fus3.cn56xx.crip_1024k)
+				family = "54";
+			else
+				family = "56";
+		}
+		break;
+	case 6:		/* CN50XX */
+		family = "50";
+		break;
+	case 7:		/* CN52XX */
+		if (fus3.cn52xx.crip_256k)
+			family = "51";
+		else
+			family = "52";
+		break;
+	default:
+		family = "XX";
+		core_model = "XX";
+		strcpy(pass, "X.X");
+		suffix = "XXX";
+		break;
+	}
+
+	clock_mhz = octeon_get_clock_rate() / 1000000;
+
+	if (family[0] != '3') {
+		/* Check for model in fuses, overrides normal decode */
+		/* This is _not_ valid for Octeon CN3XXX models */
+		fuse_data |= cvmx_fuse_read_byte(51);
+		fuse_data = fuse_data << 8;
+		fuse_data |= cvmx_fuse_read_byte(50);
+		fuse_data = fuse_data << 8;
+		fuse_data |= cvmx_fuse_read_byte(49);
+		fuse_data = fuse_data << 8;
+		fuse_data |= cvmx_fuse_read_byte(48);
+		if (fuse_data & 0x7ffff) {
+			int model = fuse_data & 0x3fff;
+			int suffix = (fuse_data >> 14) & 0x1f;
+			if (suffix && model) {
+				/*
+				 * Have both number and suffix in
+				 * fuses, so both
+				 */
+				sprintf(fuse_model, "%d%c",
+					model, 'A' + suffix - 1);
+				core_model = "";
+				family = fuse_model;
+			} else if (suffix && !model) {
+				/*
+				 * Only have suffix, so add suffix to
+				 * 'normal' model number.
+				 */
+				sprintf(fuse_model, "%s%c", core_model,
+					'A' + suffix - 1);
+				core_model = fuse_model;
+			} else {
+				/*
+				 * Don't have suffix, so just use
+				 * model from fuses.
+				 */
+				sprintf(fuse_model, "%d", model);
+				core_model = "";
+				family = fuse_model;
+			}
+		}
+	}
+	sprintf(buffer, "CN%s%sp%s-%d-%s",
+		family, core_model, pass, clock_mhz, suffix);
+	return buffer;
+}
diff --git a/arch/mips/include/asm/octeon/cvmx-asm.h b/arch/mips/include/asm/octeon/cvmx-asm.h
new file mode 100644
index 00000000000..b21d3fc1ef9
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-asm.h
@@ -0,0 +1,128 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ *
+ * This is file defines ASM primitives for the executive.
+ */
+#ifndef __CVMX_ASM_H__
+#define __CVMX_ASM_H__
+
+#include "octeon-model.h"
+
+/* other useful stuff */
+#define CVMX_SYNC asm volatile ("sync" : : : "memory")
+/* String version of SYNCW macro for using in inline asm constructs */
+#define CVMX_SYNCW_STR "syncw\nsyncw\n"
+#ifdef __OCTEON__
+
+/* Deprecated, will be removed in future release */
+#define CVMX_SYNCIO asm volatile ("nop")
+
+#define CVMX_SYNCIOBDMA asm volatile ("synciobdma" : : : "memory")
+
+/* Deprecated, will be removed in future release */
+#define CVMX_SYNCIOALL asm volatile ("nop")
+
+/*
+ * We actually use two syncw instructions in a row when we need a write
+ * memory barrier. This is because the CN3XXX series of Octeons have
+ * errata Core-401. This can cause a single syncw to not enforce
+ * ordering under very rare conditions. Even if it is rare, better safe
+ * than sorry.
+ */
+#define CVMX_SYNCW asm volatile ("syncw\n\tsyncw" : : : "memory")
+
+/*
+ * Define new sync instructions to be normal SYNC instructions for
+ * operating systems that use threads.
+ */
+#define CVMX_SYNCWS CVMX_SYNCW
+#define CVMX_SYNCS  CVMX_SYNC
+#define CVMX_SYNCWS_STR CVMX_SYNCW_STR
+#else
+/*
+ * Not using a Cavium compiler, always use the slower sync so the
+ * assembler stays happy.
+ */
+/* Deprecated, will be removed in future release */
+#define CVMX_SYNCIO asm volatile ("nop")
+
+#define CVMX_SYNCIOBDMA asm volatile ("sync" : : : "memory")
+
+/* Deprecated, will be removed in future release */
+#define CVMX_SYNCIOALL asm volatile ("nop")
+
+#define CVMX_SYNCW asm volatile ("sync" : : : "memory")
+#define CVMX_SYNCWS CVMX_SYNCW
+#define CVMX_SYNCS  CVMX_SYNC
+#define CVMX_SYNCWS_STR CVMX_SYNCW_STR
+#endif
+
+/*
+ * CVMX_PREPARE_FOR_STORE makes each byte of the block unpredictable
+ * (actually old value or zero) until that byte is stored to (by this or
+ * another processor. Note that the value of each byte is not only
+ * unpredictable, but may also change again - up until the point when one
+ * of the cores stores to the byte.
+ */
+#define CVMX_PREPARE_FOR_STORE(address, offset) \
+	asm volatile ("pref 30, " CVMX_TMP_STR(offset) "(%[rbase])" : : \
+	[rbase] "d" (address))
+/*
+ * This is a command headed to the L2 controller to tell it to clear
+ * its dirty bit for a block. Basically, SW is telling HW that the
+ * current version of the block will not be used.
+ */
+#define CVMX_DONT_WRITE_BACK(address, offset) \
+	asm volatile ("pref 29, " CVMX_TMP_STR(offset) "(%[rbase])" : : \
+	[rbase] "d" (address))
+
+/* flush stores, invalidate entire icache */
+#define CVMX_ICACHE_INVALIDATE \
+	{ CVMX_SYNC; asm volatile ("synci 0($0)" : : ); }
+
+/* flush stores, invalidate entire icache */
+#define CVMX_ICACHE_INVALIDATE2 \
+	{ CVMX_SYNC; asm volatile ("cache 0, 0($0)" : : ); }
+
+/* complete prefetches, invalidate entire dcache */
+#define CVMX_DCACHE_INVALIDATE \
+	{ CVMX_SYNC; asm volatile ("cache 9, 0($0)" : : ); }
+
+
+#define CVMX_POP(result, input) \
+	asm ("pop %[rd],%[rs]" : [rd] "=d" (result) : [rs] "d" (input))
+#define CVMX_DPOP(result, input) \
+	asm ("dpop %[rd],%[rs]" : [rd] "=d" (result) : [rs] "d" (input))
+
+/* some new cop0-like stuff */
+#define CVMX_RDHWR(result, regstr) \
+	asm volatile ("rdhwr %[rt],$" CVMX_TMP_STR(regstr) : [rt] "=d" (result))
+#define CVMX_RDHWRNV(result, regstr) \
+	asm ("rdhwr %[rt],$" CVMX_TMP_STR(regstr) : [rt] "=d" (result))
+#endif /* __CVMX_ASM_H__ */
diff --git a/arch/mips/include/asm/octeon/cvmx-bootinfo.h b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
new file mode 100644
index 00000000000..692989acd8a
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
@@ -0,0 +1,262 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * Header file containing the ABI with the bootloader.
+ */
+
+#ifndef __CVMX_BOOTINFO_H__
+#define __CVMX_BOOTINFO_H__
+
+/*
+ * Current major and minor versions of the CVMX bootinfo block that is
+ * passed from the bootloader to the application.  This is versioned
+ * so that applications can properly handle multiple bootloader
+ * versions.
+ */
+#define CVMX_BOOTINFO_MAJ_VER 1
+#define CVMX_BOOTINFO_MIN_VER 2
+
+#if (CVMX_BOOTINFO_MAJ_VER == 1)
+#define CVMX_BOOTINFO_OCTEON_SERIAL_LEN 20
+/*
+ * This structure is populated by the bootloader.  For binary
+ * compatibility the only changes that should be made are
+ * adding members to the end of the structure, and the minor
+ * version should be incremented at that time.
+ * If an incompatible change is made, the major version
+ * must be incremented, and the minor version should be reset
+ * to 0.
+ */
+struct cvmx_bootinfo {
+	uint32_t major_version;
+	uint32_t minor_version;
+
+	uint64_t stack_top;
+	uint64_t heap_base;
+	uint64_t heap_end;
+	uint64_t desc_vaddr;
+
+	uint32_t exception_base_addr;
+	uint32_t stack_size;
+	uint32_t flags;
+	uint32_t core_mask;
+	/* DRAM size in megabytes */
+	uint32_t dram_size;
+	/* physical address of free memory descriptor block*/
+	uint32_t phy_mem_desc_addr;
+	/* used to pass flags from app to debugger */
+	uint32_t debugger_flags_base_addr;
+
+	/* CPU clock speed, in hz */
+	uint32_t eclock_hz;
+
+	/* DRAM clock speed, in hz */
+	uint32_t dclock_hz;
+
+	uint32_t reserved0;
+	uint16_t board_type;
+	uint8_t board_rev_major;
+	uint8_t board_rev_minor;
+	uint16_t reserved1;
+	uint8_t reserved2;
+	uint8_t reserved3;
+	char board_serial_number[CVMX_BOOTINFO_OCTEON_SERIAL_LEN];
+	uint8_t mac_addr_base[6];
+	uint8_t mac_addr_count;
+#if (CVMX_BOOTINFO_MIN_VER >= 1)
+	/*
+	 * Several boards support compact flash on the Octeon boot
+	 * bus.  The CF memory spaces may be mapped to different
+	 * addresses on different boards.  These are the physical
+	 * addresses, so care must be taken to use the correct
+	 * XKPHYS/KSEG0 addressing depending on the application's
+	 * ABI.  These values will be 0 if CF is not present.
+	 */
+	uint64_t compact_flash_common_base_addr;
+	uint64_t compact_flash_attribute_base_addr;
+	/*
+	 * Base address of the LED display (as on EBT3000 board)
+	 * This will be 0 if LED display not present.
+	 */
+	uint64_t led_display_base_addr;
+#endif
+#if (CVMX_BOOTINFO_MIN_VER >= 2)
+	/* DFA reference clock in hz (if applicable)*/
+	uint32_t dfa_ref_clock_hz;
+
+	/*
+	 * flags indicating various configuration options.  These
+	 * flags supercede the 'flags' variable and should be used
+	 * instead if available.
+	 */
+	uint32_t config_flags;
+#endif
+
+};
+
+#define CVMX_BOOTINFO_CFG_FLAG_PCI_HOST			(1ull << 0)
+#define CVMX_BOOTINFO_CFG_FLAG_PCI_TARGET		(1ull << 1)
+#define CVMX_BOOTINFO_CFG_FLAG_DEBUG			(1ull << 2)
+#define CVMX_BOOTINFO_CFG_FLAG_NO_MAGIC			(1ull << 3)
+/* This flag is set if the TLB mappings are not contained in the
+ * 0x10000000 - 0x20000000 boot bus region. */
+#define CVMX_BOOTINFO_CFG_FLAG_OVERSIZE_TLB_MAPPING     (1ull << 4)
+#define CVMX_BOOTINFO_CFG_FLAG_BREAK			(1ull << 5)
+
+#endif /*   (CVMX_BOOTINFO_MAJ_VER == 1) */
+
+/* Type defines for board and chip types */
+enum cvmx_board_types_enum {
+	CVMX_BOARD_TYPE_NULL = 0,
+	CVMX_BOARD_TYPE_SIM = 1,
+	CVMX_BOARD_TYPE_EBT3000 = 2,
+	CVMX_BOARD_TYPE_KODAMA = 3,
+	CVMX_BOARD_TYPE_NIAGARA = 4,
+	CVMX_BOARD_TYPE_NAC38 = 5,	/* formerly NAO38 */
+	CVMX_BOARD_TYPE_THUNDER = 6,
+	CVMX_BOARD_TYPE_TRANTOR = 7,
+	CVMX_BOARD_TYPE_EBH3000 = 8,
+	CVMX_BOARD_TYPE_EBH3100 = 9,
+	CVMX_BOARD_TYPE_HIKARI = 10,
+	CVMX_BOARD_TYPE_CN3010_EVB_HS5 = 11,
+	CVMX_BOARD_TYPE_CN3005_EVB_HS5 = 12,
+	CVMX_BOARD_TYPE_KBP = 13,
+	/* Deprecated, CVMX_BOARD_TYPE_CN3010_EVB_HS5 supports the CN3020 */
+	CVMX_BOARD_TYPE_CN3020_EVB_HS5 = 14,
+	CVMX_BOARD_TYPE_EBT5800 = 15,
+	CVMX_BOARD_TYPE_NICPRO2 = 16,
+	CVMX_BOARD_TYPE_EBH5600 = 17,
+	CVMX_BOARD_TYPE_EBH5601 = 18,
+	CVMX_BOARD_TYPE_EBH5200 = 19,
+	CVMX_BOARD_TYPE_BBGW_REF = 20,
+	CVMX_BOARD_TYPE_NIC_XLE_4G = 21,
+	CVMX_BOARD_TYPE_EBT5600 = 22,
+	CVMX_BOARD_TYPE_EBH5201 = 23,
+	CVMX_BOARD_TYPE_MAX,
+
+	/*
+	 * The range from CVMX_BOARD_TYPE_MAX to
+	 * CVMX_BOARD_TYPE_CUST_DEFINED_MIN is reserved for future
+	 * SDK use.
+	 */
+
+	/*
+	 * Set aside a range for customer boards.  These numbers are managed
+	 * by Cavium.
+	 */
+	CVMX_BOARD_TYPE_CUST_DEFINED_MIN = 10000,
+	CVMX_BOARD_TYPE_CUST_WSX16 = 10001,
+	CVMX_BOARD_TYPE_CUST_NS0216 = 10002,
+	CVMX_BOARD_TYPE_CUST_NB5 = 10003,
+	CVMX_BOARD_TYPE_CUST_WMR500 = 10004,
+	CVMX_BOARD_TYPE_CUST_DEFINED_MAX = 20000,
+
+	/*
+	 * Set aside a range for customer private use.  The SDK won't
+	 * use any numbers in this range.
+	 */
+	CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
+	CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
+
+	/* The remaining range is reserved for future use. */
+};
+
+enum cvmx_chip_types_enum {
+	CVMX_CHIP_TYPE_NULL = 0,
+	CVMX_CHIP_SIM_TYPE_DEPRECATED = 1,
+	CVMX_CHIP_TYPE_OCTEON_SAMPLE = 2,
+	CVMX_CHIP_TYPE_MAX,
+};
+
+/* Compatability alias for NAC38 name change, planned to be removed
+ * from SDK 1.7 */
+#define CVMX_BOARD_TYPE_NAO38	CVMX_BOARD_TYPE_NAC38
+
+/* Functions to return string based on type */
+#define ENUM_BRD_TYPE_CASE(x) \
+	case x: return(#x + 16);	/* Skip CVMX_BOARD_TYPE_ */
+static inline const char *cvmx_board_type_to_string(enum
+						    cvmx_board_types_enum type)
+{
+	switch (type) {
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NULL)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_SIM)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBT3000)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KODAMA)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIAGARA)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NAC38)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_THUNDER)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_TRANTOR)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH3000)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH3100)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_HIKARI)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CN3010_EVB_HS5)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CN3005_EVB_HS5)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KBP)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CN3020_EVB_HS5)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBT5800)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NICPRO2)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5600)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5601)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5200)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_BBGW_REF)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_NIC_XLE_4G)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBT5600)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_EBH5201)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_MAX)
+
+			/* Customer boards listed here */
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DEFINED_MIN)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_WSX16)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_NS0216)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_NB5)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_WMR500)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DEFINED_MAX)
+
+		    /* Customer private range */
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
+		ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
+	}
+	return "Unsupported Board";
+}
+
+#define ENUM_CHIP_TYPE_CASE(x) \
+	case x: return(#x + 15);	/* Skip CVMX_CHIP_TYPE */
+static inline const char *cvmx_chip_type_to_string(enum
+						   cvmx_chip_types_enum type)
+{
+	switch (type) {
+		ENUM_CHIP_TYPE_CASE(CVMX_CHIP_TYPE_NULL)
+		    ENUM_CHIP_TYPE_CASE(CVMX_CHIP_SIM_TYPE_DEPRECATED)
+		    ENUM_CHIP_TYPE_CASE(CVMX_CHIP_TYPE_OCTEON_SAMPLE)
+		    ENUM_CHIP_TYPE_CASE(CVMX_CHIP_TYPE_MAX)
+	}
+	return "Unsupported Chip";
+}
+
+#endif /* __CVMX_BOOTINFO_H__ */
diff --git a/arch/mips/include/asm/octeon/cvmx-bootmem.h b/arch/mips/include/asm/octeon/cvmx-bootmem.h
new file mode 100644
index 00000000000..1cbe4b55889
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-bootmem.h
@@ -0,0 +1,288 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * Simple allocate only memory allocator.  Used to allocate memory at
+ * application start time.
+ */
+
+#ifndef __CVMX_BOOTMEM_H__
+#define __CVMX_BOOTMEM_H__
+/* Must be multiple of 8, changing breaks ABI */
+#define CVMX_BOOTMEM_NAME_LEN 128
+
+/* Can change without breaking ABI */
+#define CVMX_BOOTMEM_NUM_NAMED_BLOCKS 64
+
+/* minimum alignment of bootmem alloced blocks */
+#define CVMX_BOOTMEM_ALIGNMENT_SIZE     (16ull)
+
+/* Flags for cvmx_bootmem_phy_mem* functions */
+/* Allocate from end of block instead of beginning */
+#define CVMX_BOOTMEM_FLAG_END_ALLOC    (1 << 0)
+
+/* Don't do any locking. */
+#define CVMX_BOOTMEM_FLAG_NO_LOCKING   (1 << 1)
+
+/* First bytes of each free physical block of memory contain this structure,
+ * which is used to maintain the free memory list.  Since the bootloader is
+ * only 32 bits, there is a union providing 64 and 32 bit versions.  The
+ * application init code converts addresses to 64 bit addresses before the
+ * application starts.
+ */
+struct cvmx_bootmem_block_header {
+	/*
+	 * Note: these are referenced from assembly routines in the
+	 * bootloader, so this structure should not be changed
+	 * without changing those routines as well.
+	 */
+	uint64_t next_block_addr;
+	uint64_t size;
+
+};
+
+/*
+ * Structure for named memory blocks.  Number of descriptors available
+ * can be changed without affecting compatiblity, but name length
+ * changes require a bump in the bootmem descriptor version Note: This
+ * structure must be naturally 64 bit aligned, as a single memory
+ * image will be used by both 32 and 64 bit programs.
+ */
+struct cvmx_bootmem_named_block_desc {
+	/* Base address of named block */
+	uint64_t base_addr;
+	/*
+	 * Size actually allocated for named block (may differ from
+	 * requested).
+	 */
+	uint64_t size;
+	/* name of named block */
+	char name[CVMX_BOOTMEM_NAME_LEN];
+};
+
+/* Current descriptor versions */
+/* CVMX bootmem descriptor major version */
+#define CVMX_BOOTMEM_DESC_MAJ_VER   3
+
+/* CVMX bootmem descriptor minor version */
+#define CVMX_BOOTMEM_DESC_MIN_VER   0
+
+/* First three members of cvmx_bootmem_desc_t are left in original
+ * positions for backwards compatibility.
+ */
+struct cvmx_bootmem_desc {
+	/* spinlock to control access to list */
+	uint32_t lock;
+	/* flags for indicating various conditions */
+	uint32_t flags;
+	uint64_t head_addr;
+
+	/* Incremented when incompatible changes made */
+	uint32_t major_version;
+
+	/*
+	 * Incremented changed when compatible changes made, reset to
+	 * zero when major incremented.
+	 */
+	uint32_t minor_version;
+
+	uint64_t app_data_addr;
+	uint64_t app_data_size;
+
+	/* number of elements in named blocks array */
+	uint32_t named_block_num_blocks;
+
+	/* length of name array in bootmem blocks */
+	uint32_t named_block_name_len;
+	/* address of named memory block descriptors */
+	uint64_t named_block_array_addr;
+
+};
+
+/**
+ * Initialize the boot alloc memory structures. This is
+ * normally called inside of cvmx_user_app_init()
+ *
+ * @mem_desc_ptr:	Address of the free memory list
+ */
+extern int cvmx_bootmem_init(void *mem_desc_ptr);
+
+/**
+ * Allocate a block of memory from the free list that was passed
+ * to the application by the bootloader.
+ * This is an allocate-only algorithm, so freeing memory is not possible.
+ *
+ * @size:      Size in bytes of block to allocate
+ * @alignment: Alignment required - must be power of 2
+ *
+ * Returns pointer to block of memory, NULL on error
+ */
+extern void *cvmx_bootmem_alloc(uint64_t size, uint64_t alignment);
+
+/**
+ * Allocate a block of memory from the free list that was
+ * passed to the application by the bootloader at a specific
+ * address. This is an allocate-only algorithm, so
+ * freeing memory is not possible. Allocation will fail if
+ * memory cannot be allocated at the specified address.
+ *
+ * @size:      Size in bytes of block to allocate
+ * @address:   Physical address to allocate memory at.  If this memory is not
+ *                  available, the allocation fails.
+ * @alignment: Alignment required - must be power of 2
+ * Returns pointer to block of memory, NULL on error
+ */
+extern void *cvmx_bootmem_alloc_address(uint64_t size, uint64_t address,
+					uint64_t alignment);
+
+/**
+ * Allocate a block of memory from the free list that was
+ * passed to the application by the bootloader within a specified
+ * address range. This is an allocate-only algorithm, so
+ * freeing memory is not possible. Allocation will fail if
+ * memory cannot be allocated in the requested range.
+ *
+ * @size:      Size in bytes of block to allocate
+ * @min_addr:  defines the minimum address of the range
+ * @max_addr:  defines the maximum address of the range
+ * @alignment: Alignment required - must be power of 2
+ * Returns pointer to block of memory, NULL on error
+ */
+extern void *cvmx_bootmem_alloc_range(uint64_t size, uint64_t alignment,
+				      uint64_t min_addr, uint64_t max_addr);
+
+/**
+ * Frees a previously allocated named bootmem block.
+ *
+ * @name:   name of block to free
+ *
+ * Returns 0 on failure,
+ *         !0 on success
+ */
+extern int cvmx_bootmem_free_named(char *name);
+
+/**
+ * Finds a named bootmem block by name.
+ *
+ * @name:   name of block to free
+ *
+ * Returns pointer to named block descriptor on success
+ *         0 on failure
+ */
+struct cvmx_bootmem_named_block_desc *cvmx_bootmem_find_named_block(char *name);
+
+/**
+ * Allocates a block of physical memory from the free list, at
+ * (optional) requested address and alignment.
+ *
+ * @req_size: size of region to allocate.  All requests are rounded up
+ *            to be a multiple CVMX_BOOTMEM_ALIGNMENT_SIZE bytes size
+ *
+ * @address_min: Minimum address that block can occupy.
+ *
+ * @address_max: Specifies the maximum address_min (inclusive) that
+ *               the allocation can use.
+ *
+ * @alignment: Requested alignment of the block.  If this alignment
+ *             cannot be met, the allocation fails.  This must be a
+ *             power of 2.  (Note: Alignment of
+ *             CVMX_BOOTMEM_ALIGNMENT_SIZE bytes is required, and
+ *             internally enforced.  Requested alignments of less than
+ *             CVMX_BOOTMEM_ALIGNMENT_SIZE are set to
+ *             CVMX_BOOTMEM_ALIGNMENT_SIZE.)
+ *
+ * @flags:     Flags to control options for the allocation.
+ *
+ * Returns physical address of block allocated, or -1 on failure
+ */
+int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
+			       uint64_t address_max, uint64_t alignment,
+			       uint32_t flags);
+
+/**
+ * Finds a named memory block by name.
+ * Also used for finding an unused entry in the named block table.
+ *
+ * @name: Name of memory block to find.  If NULL pointer given, then
+ *        finds unused descriptor, if available.
+ *
+ * @flags: Flags to control options for the allocation.
+ *
+ * Returns Pointer to memory block descriptor, NULL if not found.
+ *         If NULL returned when name parameter is NULL, then no memory
+ *         block descriptors are available.
+ */
+struct cvmx_bootmem_named_block_desc *
+cvmx_bootmem_phy_named_block_find(char *name, uint32_t flags);
+
+/**
+ * Frees a named block.
+ *
+ * @name:   name of block to free
+ * @flags:  flags for passing options
+ *
+ * Returns 0 on failure
+ *         1 on success
+ */
+int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags);
+
+/**
+ * Frees a block to the bootmem allocator list.  This must
+ * be used with care, as the size provided must match the size
+ * of the block that was allocated, or the list will become
+ * corrupted.
+ *
+ * IMPORTANT:  This is only intended to be used as part of named block
+ * frees and initial population of the free memory list.
+ *                                                      *
+ *
+ * @phy_addr: physical address of block
+ * @size:     size of block in bytes.
+ * @flags:    flags for passing options
+ *
+ * Returns 1 on success,
+ *         0 on failure
+ */
+int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags);
+
+/**
+ * Locks the bootmem allocator.  This is useful in certain situations
+ * where multiple allocations must be made without being interrupted.
+ * This should be used with the CVMX_BOOTMEM_FLAG_NO_LOCKING flag.
+ *
+ */
+void cvmx_bootmem_lock(void);
+
+/**
+ * Unlocks the bootmem allocator.  This is useful in certain situations
+ * where multiple allocations must be made without being interrupted.
+ * This should be used with the CVMX_BOOTMEM_FLAG_NO_LOCKING flag.
+ *
+ */
+void cvmx_bootmem_unlock(void);
+
+#endif /*   __CVMX_BOOTMEM_H__ */
diff --git a/arch/mips/include/asm/octeon/cvmx-l2c.h b/arch/mips/include/asm/octeon/cvmx-l2c.h
new file mode 100644
index 00000000000..2a8c0902ea5
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-l2c.h
@@ -0,0 +1,325 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ *
+ * Interface to the Level 2 Cache (L2C) control, measurement, and debugging
+ * facilities.
+ */
+
+#ifndef __CVMX_L2C_H__
+#define __CVMX_L2C_H__
+
+/* Deprecated macro, use function */
+#define CVMX_L2_ASSOC     cvmx_l2c_get_num_assoc()
+
+/* Deprecated macro, use function */
+#define CVMX_L2_SET_BITS  cvmx_l2c_get_set_bits()
+
+/* Deprecated macro, use function */
+#define CVMX_L2_SETS      cvmx_l2c_get_num_sets()
+
+#define CVMX_L2C_IDX_ADDR_SHIFT 7  /* based on 128 byte cache line size */
+#define CVMX_L2C_IDX_MASK       (cvmx_l2c_get_num_sets() - 1)
+
+/* Defines for index aliasing computations */
+#define CVMX_L2C_TAG_ADDR_ALIAS_SHIFT \
+	(CVMX_L2C_IDX_ADDR_SHIFT + cvmx_l2c_get_set_bits())
+
+#define CVMX_L2C_ALIAS_MASK \
+	(CVMX_L2C_IDX_MASK << CVMX_L2C_TAG_ADDR_ALIAS_SHIFT)
+
+union cvmx_l2c_tag {
+	uint64_t u64;
+	struct {
+		uint64_t reserved:28;
+		uint64_t V:1;	/* Line valid */
+		uint64_t D:1;	/* Line dirty */
+		uint64_t L:1;	/* Line locked */
+		uint64_t U:1;	/* Use, LRU eviction */
+		uint64_t addr:32;	/* Phys mem (not all bits valid) */
+	} s;
+};
+
+  /* L2C Performance Counter events. */
+enum cvmx_l2c_event {
+	CVMX_L2C_EVENT_CYCLES = 0,
+	CVMX_L2C_EVENT_INSTRUCTION_MISS = 1,
+	CVMX_L2C_EVENT_INSTRUCTION_HIT = 2,
+	CVMX_L2C_EVENT_DATA_MISS = 3,
+	CVMX_L2C_EVENT_DATA_HIT = 4,
+	CVMX_L2C_EVENT_MISS = 5,
+	CVMX_L2C_EVENT_HIT = 6,
+	CVMX_L2C_EVENT_VICTIM_HIT = 7,
+	CVMX_L2C_EVENT_INDEX_CONFLICT = 8,
+	CVMX_L2C_EVENT_TAG_PROBE = 9,
+	CVMX_L2C_EVENT_TAG_UPDATE = 10,
+	CVMX_L2C_EVENT_TAG_COMPLETE = 11,
+	CVMX_L2C_EVENT_TAG_DIRTY = 12,
+	CVMX_L2C_EVENT_DATA_STORE_NOP = 13,
+	CVMX_L2C_EVENT_DATA_STORE_READ = 14,
+	CVMX_L2C_EVENT_DATA_STORE_WRITE = 15,
+	CVMX_L2C_EVENT_FILL_DATA_VALID = 16,
+	CVMX_L2C_EVENT_WRITE_REQUEST = 17,
+	CVMX_L2C_EVENT_READ_REQUEST = 18,
+	CVMX_L2C_EVENT_WRITE_DATA_VALID = 19,
+	CVMX_L2C_EVENT_XMC_NOP = 20,
+	CVMX_L2C_EVENT_XMC_LDT = 21,
+	CVMX_L2C_EVENT_XMC_LDI = 22,
+	CVMX_L2C_EVENT_XMC_LDD = 23,
+	CVMX_L2C_EVENT_XMC_STF = 24,
+	CVMX_L2C_EVENT_XMC_STT = 25,
+	CVMX_L2C_EVENT_XMC_STP = 26,
+	CVMX_L2C_EVENT_XMC_STC = 27,
+	CVMX_L2C_EVENT_XMC_DWB = 28,
+	CVMX_L2C_EVENT_XMC_PL2 = 29,
+	CVMX_L2C_EVENT_XMC_PSL1 = 30,
+	CVMX_L2C_EVENT_XMC_IOBLD = 31,
+	CVMX_L2C_EVENT_XMC_IOBST = 32,
+	CVMX_L2C_EVENT_XMC_IOBDMA = 33,
+	CVMX_L2C_EVENT_XMC_IOBRSP = 34,
+	CVMX_L2C_EVENT_XMC_BUS_VALID = 35,
+	CVMX_L2C_EVENT_XMC_MEM_DATA = 36,
+	CVMX_L2C_EVENT_XMC_REFL_DATA = 37,
+	CVMX_L2C_EVENT_XMC_IOBRSP_DATA = 38,
+	CVMX_L2C_EVENT_RSC_NOP = 39,
+	CVMX_L2C_EVENT_RSC_STDN = 40,
+	CVMX_L2C_EVENT_RSC_FILL = 41,
+	CVMX_L2C_EVENT_RSC_REFL = 42,
+	CVMX_L2C_EVENT_RSC_STIN = 43,
+	CVMX_L2C_EVENT_RSC_SCIN = 44,
+	CVMX_L2C_EVENT_RSC_SCFL = 45,
+	CVMX_L2C_EVENT_RSC_SCDN = 46,
+	CVMX_L2C_EVENT_RSC_DATA_VALID = 47,
+	CVMX_L2C_EVENT_RSC_VALID_FILL = 48,
+	CVMX_L2C_EVENT_RSC_VALID_STRSP = 49,
+	CVMX_L2C_EVENT_RSC_VALID_REFL = 50,
+	CVMX_L2C_EVENT_LRF_REQ = 51,
+	CVMX_L2C_EVENT_DT_RD_ALLOC = 52,
+	CVMX_L2C_EVENT_DT_WR_INVAL = 53
+};
+
+/**
+ * Configure one of the four L2 Cache performance counters to capture event
+ * occurences.
+ *
+ * @counter:        The counter to configure. Range 0..3.
+ * @event:          The type of L2 Cache event occurrence to count.
+ * @clear_on_read:  When asserted, any read of the performance counter
+ *                       clears the counter.
+ *
+ * The routine does not clear the counter.
+ */
+void cvmx_l2c_config_perf(uint32_t counter,
+			  enum cvmx_l2c_event event, uint32_t clear_on_read);
+/**
+ * Read the given L2 Cache performance counter. The counter must be configured
+ * before reading, but this routine does not enforce this requirement.
+ *
+ * @counter:  The counter to configure. Range 0..3.
+ *
+ * Returns The current counter value.
+ */
+uint64_t cvmx_l2c_read_perf(uint32_t counter);
+
+/**
+ * Return the L2 Cache way partitioning for a given core.
+ *
+ * @core:  The core processor of interest.
+ *
+ * Returns    The mask specifying the partitioning. 0 bits in mask indicates
+ *              the cache 'ways' that a core can evict from.
+ *            -1 on error
+ */
+int cvmx_l2c_get_core_way_partition(uint32_t core);
+
+/**
+ * Partitions the L2 cache for a core
+ *
+ * @core:  The core that the partitioning applies to.
+ *
+ * @mask: The partitioning of the ways expressed as a binary mask. A 0
+ *        bit allows the core to evict cache lines from a way, while a
+ *        1 bit blocks the core from evicting any lines from that
+ *        way. There must be at least one allowed way (0 bit) in the
+ *        mask.
+ *
+ * If any ways are blocked for all cores and the HW blocks, then those
+ * ways will never have any cache lines evicted from them.  All cores
+ * and the hardware blocks are free to read from all ways regardless
+ * of the partitioning.
+ */
+int cvmx_l2c_set_core_way_partition(uint32_t core, uint32_t mask);
+
+/**
+ * Return the L2 Cache way partitioning for the hw blocks.
+ *
+ * Returns    The mask specifying the reserved way. 0 bits in mask indicates
+ *              the cache 'ways' that a core can evict from.
+ *            -1 on error
+ */
+int cvmx_l2c_get_hw_way_partition(void);
+
+/**
+ * Partitions the L2 cache for the hardware blocks.
+ *
+ * @mask: The partitioning of the ways expressed as a binary mask. A 0
+ *        bit allows the core to evict cache lines from a way, while a
+ *        1 bit blocks the core from evicting any lines from that
+ *        way. There must be at least one allowed way (0 bit) in the
+ *        mask.
+ *
+ * If any ways are blocked for all cores and the HW blocks, then those
+ * ways will never have any cache lines evicted from them.  All cores
+ * and the hardware blocks are free to read from all ways regardless
+ * of the partitioning.
+ */
+int cvmx_l2c_set_hw_way_partition(uint32_t mask);
+
+/**
+ * Locks a line in the L2 cache at the specified physical address
+ *
+ * @addr:   physical address of line to lock
+ *
+ * Returns 0 on success,
+ *         1 if line not locked.
+ */
+int cvmx_l2c_lock_line(uint64_t addr);
+
+/**
+ * Locks a specified memory region in the L2 cache.
+ *
+ * Note that if not all lines can be locked, that means that all
+ * but one of the ways (associations) available to the locking
+ * core are locked.  Having only 1 association available for
+ * normal caching may have a significant adverse affect on performance.
+ * Care should be taken to ensure that enough of the L2 cache is left
+ * unlocked to allow for normal caching of DRAM.
+ *
+ * @start:  Physical address of the start of the region to lock
+ * @len:    Length (in bytes) of region to lock
+ *
+ * Returns Number of requested lines that where not locked.
+ *         0 on success (all locked)
+ */
+int cvmx_l2c_lock_mem_region(uint64_t start, uint64_t len);
+
+/**
+ * Unlock and flush a cache line from the L2 cache.
+ * IMPORTANT: Must only be run by one core at a time due to use
+ * of L2C debug features.
+ * Note that this function will flush a matching but unlocked cache line.
+ * (If address is not in L2, no lines are flushed.)
+ *
+ * @address: Physical address to unlock
+ *
+ * Returns 0: line not unlocked
+ *         1: line unlocked
+ */
+int cvmx_l2c_unlock_line(uint64_t address);
+
+/**
+ * Unlocks a region of memory that is locked in the L2 cache
+ *
+ * @start:  start physical address
+ * @len:    length (in bytes) to unlock
+ *
+ * Returns Number of locked lines that the call unlocked
+ */
+int cvmx_l2c_unlock_mem_region(uint64_t start, uint64_t len);
+
+/**
+ * Read the L2 controller tag for a given location in L2
+ *
+ * @association:
+ *               Which association to read line from
+ * @index:  Which way to read from.
+ *
+ * Returns l2c tag structure for line requested.
+ */
+union cvmx_l2c_tag cvmx_l2c_get_tag(uint32_t association, uint32_t index);
+
+/* Wrapper around deprecated old function name */
+static inline union cvmx_l2c_tag cvmx_get_l2c_tag(uint32_t association,
+					      uint32_t index)
+{
+	return cvmx_l2c_get_tag(association, index);
+}
+
+/**
+ * Returns the cache index for a given physical address
+ *
+ * @addr:   physical address
+ *
+ * Returns L2 cache index
+ */
+uint32_t cvmx_l2c_address_to_index(uint64_t addr);
+
+/**
+ * Flushes (and unlocks) the entire L2 cache.
+ * IMPORTANT: Must only be run by one core at a time due to use
+ * of L2C debug features.
+ */
+void cvmx_l2c_flush(void);
+
+/**
+ *
+ * Returns Returns the size of the L2 cache in bytes,
+ * -1 on error (unrecognized model)
+ */
+int cvmx_l2c_get_cache_size_bytes(void);
+
+/**
+ * Return the number of sets in the L2 Cache
+ *
+ * Returns
+ */
+int cvmx_l2c_get_num_sets(void);
+
+/**
+ * Return log base 2 of the number of sets in the L2 cache
+ * Returns
+ */
+int cvmx_l2c_get_set_bits(void);
+/**
+ * Return the number of associations in the L2 Cache
+ *
+ * Returns
+ */
+int cvmx_l2c_get_num_assoc(void);
+
+/**
+ * Flush a line from the L2 cache
+ * This should only be called from one core at a time, as this routine
+ * sets the core to the 'debug' core in order to flush the line.
+ *
+ * @assoc:  Association (or way) to flush
+ * @index:  Index to flush
+ */
+void cvmx_l2c_flush_line(uint32_t assoc, uint32_t index);
+
+#endif /* __CVMX_L2C_H__ */
diff --git a/arch/mips/include/asm/octeon/cvmx-packet.h b/arch/mips/include/asm/octeon/cvmx-packet.h
new file mode 100644
index 00000000000..38aefa1bab9
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-packet.h
@@ -0,0 +1,61 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * Packet buffer defines.
+ */
+
+#ifndef __CVMX_PACKET_H__
+#define __CVMX_PACKET_H__
+
+/**
+ * This structure defines a buffer pointer on Octeon
+ */
+union cvmx_buf_ptr {
+	void *ptr;
+	uint64_t u64;
+	struct {
+		/* if set, invert the "free" pick of the overall
+		 * packet. HW always sets this bit to 0 on inbound
+		 * packet */
+		uint64_t i:1;
+
+		/* Indicates the amount to back up to get to the
+		 * buffer start in cache lines. In most cases this is
+		 * less than one complete cache line, so the value is
+		 * zero */
+		uint64_t back:4;
+		/* The pool that the buffer came from / goes to */
+		uint64_t pool:3;
+		/* The size of the segment pointed to by addr (in bytes) */
+		uint64_t size:16;
+		/* Pointer to the first byte of the data, NOT buffer */
+		uint64_t addr:40;
+	} s;
+};
+
+#endif /*  __CVMX_PACKET_H__ */
diff --git a/arch/mips/include/asm/octeon/cvmx-spinlock.h b/arch/mips/include/asm/octeon/cvmx-spinlock.h
new file mode 100644
index 00000000000..2fbf0871df1
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-spinlock.h
@@ -0,0 +1,232 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/**
+ * Implementation of spinlocks for Octeon CVMX.  Although similar in
+ * function to Linux kernel spinlocks, they are not compatible.
+ * Octeon CVMX spinlocks are only used to synchronize with the boot
+ * monitor and other non-Linux programs running in the system.
+ */
+
+#ifndef __CVMX_SPINLOCK_H__
+#define __CVMX_SPINLOCK_H__
+
+#include "cvmx-asm.h"
+
+/* Spinlocks for Octeon */
+
+/* define these to enable recursive spinlock debugging */
+/*#define CVMX_SPINLOCK_DEBUG */
+
+/**
+ * Spinlocks for Octeon CVMX
+ */
+typedef struct {
+	volatile uint32_t value;
+} cvmx_spinlock_t;
+
+/* note - macros not expanded in inline ASM, so values hardcoded */
+#define  CVMX_SPINLOCK_UNLOCKED_VAL  0
+#define  CVMX_SPINLOCK_LOCKED_VAL    1
+
+#define CVMX_SPINLOCK_UNLOCKED_INITIALIZER  {CVMX_SPINLOCK_UNLOCKED_VAL}
+
+/**
+ * Initialize a spinlock
+ *
+ * @lock:   Lock to initialize
+ */
+static inline void cvmx_spinlock_init(cvmx_spinlock_t *lock)
+{
+	lock->value = CVMX_SPINLOCK_UNLOCKED_VAL;
+}
+
+/**
+ * Return non-zero if the spinlock is currently locked
+ *
+ * @lock:   Lock to check
+ * Returns Non-zero if locked
+ */
+static inline int cvmx_spinlock_locked(cvmx_spinlock_t *lock)
+{
+	return lock->value != CVMX_SPINLOCK_UNLOCKED_VAL;
+}
+
+/**
+ * Releases lock
+ *
+ * @lock:   pointer to lock structure
+ */
+static inline void cvmx_spinlock_unlock(cvmx_spinlock_t *lock)
+{
+	CVMX_SYNCWS;
+	lock->value = 0;
+	CVMX_SYNCWS;
+}
+
+/**
+ * Attempts to take the lock, but does not spin if lock is not available.
+ * May take some time to acquire the lock even if it is available
+ * due to the ll/sc not succeeding.
+ *
+ * @lock:   pointer to lock structure
+ *
+ * Returns 0: lock successfully taken
+ *         1: lock not taken, held by someone else
+ * These return values match the Linux semantics.
+ */
+
+static inline unsigned int cvmx_spinlock_trylock(cvmx_spinlock_t *lock)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__(".set noreorder         \n"
+			     "1: ll   %[tmp], %[val] \n"
+			/* if lock held, fail immediately */
+			     "   bnez %[tmp], 2f     \n"
+			     "   li   %[tmp], 1      \n"
+			     "   sc   %[tmp], %[val] \n"
+			     "   beqz %[tmp], 1b     \n"
+			     "   li   %[tmp], 0      \n"
+			     "2:                     \n"
+			     ".set reorder           \n" :
+			[val] "+m"(lock->value), [tmp] "=&r"(tmp)
+			     : : "memory");
+
+	return tmp != 0;		/* normalize to 0 or 1 */
+}
+
+/**
+ * Gets lock, spins until lock is taken
+ *
+ * @lock:   pointer to lock structure
+ */
+static inline void cvmx_spinlock_lock(cvmx_spinlock_t *lock)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__(".set noreorder         \n"
+			     "1: ll   %[tmp], %[val]  \n"
+			     "   bnez %[tmp], 1b     \n"
+			     "   li   %[tmp], 1      \n"
+			     "   sc   %[tmp], %[val] \n"
+			     "   beqz %[tmp], 1b     \n"
+			     "   nop                \n"
+			     ".set reorder           \n" :
+			[val] "+m"(lock->value), [tmp] "=&r"(tmp)
+			: : "memory");
+
+}
+
+/** ********************************************************************
+ * Bit spinlocks
+ * These spinlocks use a single bit (bit 31) of a 32 bit word for locking.
+ * The rest of the bits in the word are left undisturbed.  This enables more
+ * compact data structures as only 1 bit is consumed for the lock.
+ *
+ */
+
+/**
+ * Gets lock, spins until lock is taken
+ * Preserves the low 31 bits of the 32 bit
+ * word used for the lock.
+ *
+ *
+ * @word:  word to lock bit 31 of
+ */
+static inline void cvmx_spinlock_bit_lock(uint32_t *word)
+{
+	unsigned int tmp;
+	unsigned int sav;
+
+	__asm__ __volatile__(".set noreorder         \n"
+			     ".set noat              \n"
+			     "1: ll    %[tmp], %[val]  \n"
+			     "   bbit1 %[tmp], 31, 1b    \n"
+			     "   li    $at, 1      \n"
+			     "   ins   %[tmp], $at, 31, 1  \n"
+			     "   sc    %[tmp], %[val] \n"
+			     "   beqz  %[tmp], 1b     \n"
+			     "   nop                \n"
+			     ".set at              \n"
+			     ".set reorder           \n" :
+			[val] "+m"(*word), [tmp] "=&r"(tmp), [sav] "=&r"(sav)
+			     : : "memory");
+
+}
+
+/**
+ * Attempts to get lock, returns immediately with success/failure
+ * Preserves the low 31 bits of the 32 bit
+ * word used for the lock.
+ *
+ *
+ * @word:  word to lock bit 31 of
+ * Returns 0: lock successfully taken
+ *         1: lock not taken, held by someone else
+ * These return values match the Linux semantics.
+ */
+static inline unsigned int cvmx_spinlock_bit_trylock(uint32_t *word)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__(".set noreorder\n\t"
+			     ".set noat\n"
+			     "1: ll    %[tmp], %[val] \n"
+			/* if lock held, fail immediately */
+			     "   bbit1 %[tmp], 31, 2f     \n"
+			     "   li    $at, 1      \n"
+			     "   ins   %[tmp], $at, 31, 1  \n"
+			     "   sc    %[tmp], %[val] \n"
+			     "   beqz  %[tmp], 1b     \n"
+			     "   li    %[tmp], 0      \n"
+			     "2:                     \n"
+			     ".set at              \n"
+			     ".set reorder           \n" :
+			[val] "+m"(*word), [tmp] "=&r"(tmp)
+			: : "memory");
+
+	return tmp != 0;		/* normalize to 0 or 1 */
+}
+
+/**
+ * Releases bit lock
+ *
+ * Unconditionally clears bit 31 of the lock word.  Note that this is
+ * done non-atomically, as this implementation assumes that the rest
+ * of the bits in the word are protected by the lock.
+ *
+ * @word:  word to unlock bit 31 in
+ */
+static inline void cvmx_spinlock_bit_unlock(uint32_t *word)
+{
+	CVMX_SYNCWS;
+	*word &= ~(1UL << 31);
+	CVMX_SYNCWS;
+}
+
+#endif /* __CVMX_SPINLOCK_H__ */
diff --git a/arch/mips/include/asm/octeon/cvmx-sysinfo.h b/arch/mips/include/asm/octeon/cvmx-sysinfo.h
new file mode 100644
index 00000000000..61dd5741afe
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-sysinfo.h
@@ -0,0 +1,152 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * This module provides system/board information obtained by the bootloader.
+ */
+
+#ifndef __CVMX_SYSINFO_H__
+#define __CVMX_SYSINFO_H__
+
+#define OCTEON_SERIAL_LEN 20
+/**
+ * Structure describing application specific information.
+ * __cvmx_app_init() populates this from the cvmx boot descriptor.
+ * This structure is private to simple executive applications, so
+ * no versioning is required.
+ *
+ * This structure must be provided with some fields set in order to
+ * use simple executive functions in other applications (Linux kernel,
+ * u-boot, etc.)  The cvmx_sysinfo_minimal_initialize() function is
+ * provided to set the required values in these cases.
+ */
+struct cvmx_sysinfo {
+	/* System wide variables */
+	/* installed DRAM in system, in bytes */
+	uint64_t system_dram_size;
+
+	/* ptr to memory descriptor block */
+	void *phy_mem_desc_ptr;
+
+
+	/* Application image specific variables */
+	/* stack top address (virtual) */
+	uint64_t stack_top;
+	/* heap base address (virtual) */
+	uint64_t heap_base;
+	/* stack size in bytes */
+	uint32_t stack_size;
+	/* heap size in bytes */
+	uint32_t heap_size;
+	/* coremask defining cores running application */
+	uint32_t core_mask;
+	/* Deprecated, use cvmx_coremask_first_core() to select init core */
+	uint32_t init_core;
+
+	/* exception base address, as set by bootloader */
+	uint64_t exception_base_addr;
+
+	/* cpu clock speed in hz */
+	uint32_t cpu_clock_hz;
+
+	/* dram data rate in hz (data rate = 2 * clock rate */
+	uint32_t dram_data_rate_hz;
+
+
+	uint16_t board_type;
+	uint8_t board_rev_major;
+	uint8_t board_rev_minor;
+	uint8_t mac_addr_base[6];
+	uint8_t mac_addr_count;
+	char board_serial_number[OCTEON_SERIAL_LEN];
+	/*
+	 * Several boards support compact flash on the Octeon boot
+	 * bus.  The CF memory spaces may be mapped to different
+	 * addresses on different boards.  These values will be 0 if
+	 * CF is not present.  Note that these addresses are physical
+	 * addresses, and it is up to the application to use the
+	 * proper addressing mode (XKPHYS, KSEG0, etc.)
+	 */
+	uint64_t compact_flash_common_base_addr;
+	uint64_t compact_flash_attribute_base_addr;
+	/*
+	 * Base address of the LED display (as on EBT3000 board) This
+	 * will be 0 if LED display not present.  Note that this
+	 * address is a physical address, and it is up to the
+	 * application to use the proper addressing mode (XKPHYS,
+	 * KSEG0, etc.)
+	 */
+	uint64_t led_display_base_addr;
+	/* DFA reference clock in hz (if applicable)*/
+	uint32_t dfa_ref_clock_hz;
+	/* configuration flags from bootloader */
+	uint32_t bootloader_config_flags;
+
+	/* Uart number used for console */
+	uint8_t console_uart_num;
+};
+
+/**
+ * This function returns the system/board information as obtained
+ * by the bootloader.
+ *
+ *
+ * Returns  Pointer to the boot information structure
+ *
+ */
+
+extern struct cvmx_sysinfo *cvmx_sysinfo_get(void);
+
+/**
+ * This function is used in non-simple executive environments (such as
+ * Linux kernel, u-boot, etc.)  to configure the minimal fields that
+ * are required to use simple executive files directly.
+ *
+ * Locking (if required) must be handled outside of this
+ * function
+ *
+ * @phy_mem_desc_ptr: Pointer to global physical memory descriptor
+ *                   (bootmem descriptor) @board_type: Octeon board
+ *                   type enumeration
+ *
+ * @board_rev_major:
+ *                   Board major revision
+ * @board_rev_minor:
+ *                   Board minor revision
+ * @cpu_clock_hz:
+ *                   CPU clock freqency in hertz
+ *
+ * Returns 0: Failure
+ *         1: success
+ */
+extern int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
+					   uint16_t board_type,
+					   uint8_t board_rev_major,
+					   uint8_t board_rev_minor,
+					   uint32_t cpu_clock_hz);
+
+#endif /* __CVMX_SYSINFO_H__ */
diff --git a/arch/mips/include/asm/octeon/cvmx.h b/arch/mips/include/asm/octeon/cvmx.h
new file mode 100644
index 00000000000..03fddfa3e92
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx.h
@@ -0,0 +1,505 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+#ifndef __CVMX_H__
+#define __CVMX_H__
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+
+#include "cvmx-asm.h"
+#include "cvmx-packet.h"
+#include "cvmx-sysinfo.h"
+
+#include "cvmx-ciu-defs.h"
+#include "cvmx-gpio-defs.h"
+#include "cvmx-iob-defs.h"
+#include "cvmx-ipd-defs.h"
+#include "cvmx-l2c-defs.h"
+#include "cvmx-l2d-defs.h"
+#include "cvmx-l2t-defs.h"
+#include "cvmx-led-defs.h"
+#include "cvmx-mio-defs.h"
+#include "cvmx-pow-defs.h"
+
+#include "cvmx-bootinfo.h"
+#include "cvmx-bootmem.h"
+#include "cvmx-l2c.h"
+
+#ifndef CVMX_ENABLE_DEBUG_PRINTS
+#define CVMX_ENABLE_DEBUG_PRINTS 1
+#endif
+
+#if CVMX_ENABLE_DEBUG_PRINTS
+#define cvmx_dprintf        printk
+#else
+#define cvmx_dprintf(...)   {}
+#endif
+
+#define CVMX_MAX_CORES          (16)
+#define CVMX_CACHE_LINE_SIZE    (128)	/* In bytes */
+#define CVMX_CACHE_LINE_MASK    (CVMX_CACHE_LINE_SIZE - 1)	/* In bytes */
+#define CVMX_CACHE_LINE_ALIGNED __attribute__ ((aligned(CVMX_CACHE_LINE_SIZE)))
+#define CAST64(v) ((long long)(long)(v))
+#define CASTPTR(type, v) ((type *)(long)(v))
+
+/*
+ * Returns processor ID, different Linux and simple exec versions
+ * provided in the cvmx-app-init*.c files.
+ */
+static inline uint32_t cvmx_get_proc_id(void) __attribute__ ((pure));
+static inline uint32_t cvmx_get_proc_id(void)
+{
+	uint32_t id;
+	asm("mfc0 %0, $15,0" : "=r"(id));
+	return id;
+}
+
+/* turn the variable name into a string */
+#define CVMX_TMP_STR(x) CVMX_TMP_STR2(x)
+#define CVMX_TMP_STR2(x) #x
+
+/**
+ * Builds a bit mask given the required size in bits.
+ *
+ * @bits:   Number of bits in the mask
+ * Returns The mask
+ */ static inline uint64_t cvmx_build_mask(uint64_t bits)
+{
+	return ~((~0x0ull) << bits);
+}
+
+/**
+ * Builds a memory address for I/O based on the Major and Sub DID.
+ *
+ * @major_did: 5 bit major did
+ * @sub_did:   3 bit sub did
+ * Returns I/O base address
+ */
+static inline uint64_t cvmx_build_io_address(uint64_t major_did,
+					     uint64_t sub_did)
+{
+	return (0x1ull << 48) | (major_did << 43) | (sub_did << 40);
+}
+
+/**
+ * Perform mask and shift to place the supplied value into
+ * the supplied bit rage.
+ *
+ * Example: cvmx_build_bits(39,24,value)
+ * <pre>
+ * 6       5       4       3       3       2       1
+ * 3       5       7       9       1       3       5       7      0
+ * +-------+-------+-------+-------+-------+-------+-------+------+
+ * 000000000000000000000000___________value000000000000000000000000
+ * </pre>
+ *
+ * @high_bit: Highest bit value can occupy (inclusive) 0-63
+ * @low_bit:  Lowest bit value can occupy inclusive 0-high_bit
+ * @value:    Value to use
+ * Returns Value masked and shifted
+ */
+static inline uint64_t cvmx_build_bits(uint64_t high_bit,
+				       uint64_t low_bit, uint64_t value)
+{
+	return (value & cvmx_build_mask(high_bit - low_bit + 1)) << low_bit;
+}
+
+enum cvmx_mips_space {
+	CVMX_MIPS_SPACE_XKSEG = 3LL,
+	CVMX_MIPS_SPACE_XKPHYS = 2LL,
+	CVMX_MIPS_SPACE_XSSEG = 1LL,
+	CVMX_MIPS_SPACE_XUSEG = 0LL
+};
+
+/* These macros for use when using 32 bit pointers. */
+#define CVMX_MIPS32_SPACE_KSEG0 1l
+#define CVMX_ADD_SEG32(segment, add) \
+	(((int32_t)segment << 31) | (int32_t)(add))
+
+#define CVMX_IO_SEG CVMX_MIPS_SPACE_XKPHYS
+
+/* These macros simplify the process of creating common IO addresses */
+#define CVMX_ADD_SEG(segment, add) \
+	((((uint64_t)segment) << 62) | (add))
+#ifndef CVMX_ADD_IO_SEG
+#define CVMX_ADD_IO_SEG(add) CVMX_ADD_SEG(CVMX_IO_SEG, (add))
+#endif
+
+/**
+ * Convert a memory pointer (void*) into a hardware compatable
+ * memory address (uint64_t). Octeon hardware widgets don't
+ * understand logical addresses.
+ *
+ * @ptr:    C style memory pointer
+ * Returns Hardware physical address
+ */
+static inline uint64_t cvmx_ptr_to_phys(void *ptr)
+{
+	if (sizeof(void *) == 8) {
+		/*
+		 * We're running in 64 bit mode. Normally this means
+		 * that we can use 40 bits of address space (the
+		 * hardware limit). Unfortunately there is one case
+		 * were we need to limit this to 30 bits, sign
+		 * extended 32 bit. Although these are 64 bits wide,
+		 * only 30 bits can be used.
+		 */
+		if ((CAST64(ptr) >> 62) == 3)
+			return CAST64(ptr) & cvmx_build_mask(30);
+		else
+			return CAST64(ptr) & cvmx_build_mask(40);
+	} else {
+		return (long)(ptr) & 0x1fffffff;
+	}
+}
+
+/**
+ * Convert a hardware physical address (uint64_t) into a
+ * memory pointer (void *).
+ *
+ * @physical_address:
+ *               Hardware physical address to memory
+ * Returns Pointer to memory
+ */
+static inline void *cvmx_phys_to_ptr(uint64_t physical_address)
+{
+	if (sizeof(void *) == 8) {
+		/* Just set the top bit, avoiding any TLB uglyness */
+		return CASTPTR(void,
+			       CVMX_ADD_SEG(CVMX_MIPS_SPACE_XKPHYS,
+					    physical_address));
+	} else {
+		return CASTPTR(void,
+			       CVMX_ADD_SEG32(CVMX_MIPS32_SPACE_KSEG0,
+					      physical_address));
+	}
+}
+
+/* The following #if controls the definition of the macro
+    CVMX_BUILD_WRITE64. This macro is used to build a store operation to
+    a full 64bit address. With a 64bit ABI, this can be done with a simple
+    pointer access. 32bit ABIs require more complicated assembly */
+
+/* We have a full 64bit ABI. Writing to a 64bit address can be done with
+    a simple volatile pointer */
+#define CVMX_BUILD_WRITE64(TYPE, ST)                                    \
+static inline void cvmx_write64_##TYPE(uint64_t addr, TYPE##_t val)     \
+{                                                                       \
+    *CASTPTR(volatile TYPE##_t, addr) = val;                            \
+}
+
+
+/* The following #if controls the definition of the macro
+    CVMX_BUILD_READ64. This macro is used to build a load operation from
+    a full 64bit address. With a 64bit ABI, this can be done with a simple
+    pointer access. 32bit ABIs require more complicated assembly */
+
+/* We have a full 64bit ABI. Writing to a 64bit address can be done with
+    a simple volatile pointer */
+#define CVMX_BUILD_READ64(TYPE, LT)                                     \
+static inline TYPE##_t cvmx_read64_##TYPE(uint64_t addr)                \
+{                                                                       \
+	return *CASTPTR(volatile TYPE##_t, addr);			\
+}
+
+
+/* The following defines 8 functions for writing to a 64bit address. Each
+    takes two arguments, the address and the value to write.
+    cvmx_write64_int64      cvmx_write64_uint64
+    cvmx_write64_int32      cvmx_write64_uint32
+    cvmx_write64_int16      cvmx_write64_uint16
+    cvmx_write64_int8       cvmx_write64_uint8 */
+CVMX_BUILD_WRITE64(int64, "sd");
+CVMX_BUILD_WRITE64(int32, "sw");
+CVMX_BUILD_WRITE64(int16, "sh");
+CVMX_BUILD_WRITE64(int8, "sb");
+CVMX_BUILD_WRITE64(uint64, "sd");
+CVMX_BUILD_WRITE64(uint32, "sw");
+CVMX_BUILD_WRITE64(uint16, "sh");
+CVMX_BUILD_WRITE64(uint8, "sb");
+#define cvmx_write64 cvmx_write64_uint64
+
+/* The following defines 8 functions for reading from a 64bit address. Each
+    takes the address as the only argument
+    cvmx_read64_int64       cvmx_read64_uint64
+    cvmx_read64_int32       cvmx_read64_uint32
+    cvmx_read64_int16       cvmx_read64_uint16
+    cvmx_read64_int8        cvmx_read64_uint8 */
+CVMX_BUILD_READ64(int64, "ld");
+CVMX_BUILD_READ64(int32, "lw");
+CVMX_BUILD_READ64(int16, "lh");
+CVMX_BUILD_READ64(int8, "lb");
+CVMX_BUILD_READ64(uint64, "ld");
+CVMX_BUILD_READ64(uint32, "lw");
+CVMX_BUILD_READ64(uint16, "lhu");
+CVMX_BUILD_READ64(uint8, "lbu");
+#define cvmx_read64 cvmx_read64_uint64
+
+
+static inline void cvmx_write_csr(uint64_t csr_addr, uint64_t val)
+{
+	cvmx_write64(csr_addr, val);
+
+	/*
+	 * Perform an immediate read after every write to an RSL
+	 * register to force the write to complete. It doesn't matter
+	 * what RSL read we do, so we choose CVMX_MIO_BOOT_BIST_STAT
+	 * because it is fast and harmless.
+	 */
+	if ((csr_addr >> 40) == (0x800118))
+		cvmx_read64(CVMX_MIO_BOOT_BIST_STAT);
+}
+
+static inline void cvmx_write_io(uint64_t io_addr, uint64_t val)
+{
+	cvmx_write64(io_addr, val);
+
+}
+
+static inline uint64_t cvmx_read_csr(uint64_t csr_addr)
+{
+	uint64_t val = cvmx_read64(csr_addr);
+	return val;
+}
+
+
+static inline void cvmx_send_single(uint64_t data)
+{
+	const uint64_t CVMX_IOBDMA_SENDSINGLE = 0xffffffffffffa200ull;
+	cvmx_write64(CVMX_IOBDMA_SENDSINGLE, data);
+}
+
+static inline void cvmx_read_csr_async(uint64_t scraddr, uint64_t csr_addr)
+{
+	union {
+		uint64_t u64;
+		struct {
+			uint64_t scraddr:8;
+			uint64_t len:8;
+			uint64_t addr:48;
+		} s;
+	} addr;
+	addr.u64 = csr_addr;
+	addr.s.scraddr = scraddr >> 3;
+	addr.s.len = 1;
+	cvmx_send_single(addr.u64);
+}
+
+/* Return true if Octeon is CN38XX pass 1 */
+static inline int cvmx_octeon_is_pass1(void)
+{
+#if OCTEON_IS_COMMON_BINARY()
+	return 0;	/* Pass 1 isn't supported for common binaries */
+#else
+/* Now that we know we're built for a specific model, only check CN38XX */
+#if OCTEON_IS_MODEL(OCTEON_CN38XX)
+	return cvmx_get_proc_id() == OCTEON_CN38XX_PASS1;
+#else
+	return 0;	/* Built for non CN38XX chip, we're not CN38XX pass1 */
+#endif
+#endif
+}
+
+static inline unsigned int cvmx_get_core_num(void)
+{
+	unsigned int core_num;
+	CVMX_RDHWRNV(core_num, 0);
+	return core_num;
+}
+
+/**
+ * Returns the number of bits set in the provided value.
+ * Simple wrapper for POP instruction.
+ *
+ * @val:    32 bit value to count set bits in
+ *
+ * Returns Number of bits set
+ */
+static inline uint32_t cvmx_pop(uint32_t val)
+{
+	uint32_t pop;
+	CVMX_POP(pop, val);
+	return pop;
+}
+
+/**
+ * Returns the number of bits set in the provided value.
+ * Simple wrapper for DPOP instruction.
+ *
+ * @val:    64 bit value to count set bits in
+ *
+ * Returns Number of bits set
+ */
+static inline int cvmx_dpop(uint64_t val)
+{
+	int pop;
+	CVMX_DPOP(pop, val);
+	return pop;
+}
+
+/**
+ * Provide current cycle counter as a return value
+ *
+ * Returns current cycle counter
+ */
+
+static inline uint64_t cvmx_get_cycle(void)
+{
+	uint64_t cycle;
+	CVMX_RDHWR(cycle, 31);
+	return cycle;
+}
+
+/**
+ * Reads a chip global cycle counter.  This counts CPU cycles since
+ * chip reset.  The counter is 64 bit.
+ * This register does not exist on CN38XX pass 1 silicion
+ *
+ * Returns Global chip cycle count since chip reset.
+ */
+static inline uint64_t cvmx_get_cycle_global(void)
+{
+	if (cvmx_octeon_is_pass1())
+		return 0;
+	else
+		return cvmx_read64(CVMX_IPD_CLK_COUNT);
+}
+
+/**
+ * This macro spins on a field waiting for it to reach a value. It
+ * is common in code to need to wait for a specific field in a CSR
+ * to match a specific value. Conceptually this macro expands to:
+ *
+ * 1) read csr at "address" with a csr typedef of "type"
+ * 2) Check if ("type".s."field" "op" "value")
+ * 3) If #2 isn't true loop to #1 unless too much time has passed.
+ */
+#define CVMX_WAIT_FOR_FIELD64(address, type, field, op, value, timeout_usec)\
+    (									\
+{									\
+	int result;							\
+	do {								\
+		uint64_t done = cvmx_get_cycle() + (uint64_t)timeout_usec * \
+			cvmx_sysinfo_get()->cpu_clock_hz / 1000000;	\
+		type c;							\
+		while (1) {						\
+			c.u64 = cvmx_read_csr(address);			\
+			if ((c.s.field) op(value)) {			\
+				result = 0;				\
+				break;					\
+			} else if (cvmx_get_cycle() > done) {		\
+				result = -1;				\
+				break;					\
+			} else						\
+				cvmx_wait(100);				\
+		}							\
+	} while (0);							\
+	result;								\
+})
+
+/***************************************************************************/
+
+static inline void cvmx_reset_octeon(void)
+{
+	union cvmx_ciu_soft_rst ciu_soft_rst;
+	ciu_soft_rst.u64 = 0;
+	ciu_soft_rst.s.soft_rst = 1;
+	cvmx_write_csr(CVMX_CIU_SOFT_RST, ciu_soft_rst.u64);
+}
+
+/* Return the number of cores available in the chip */
+static inline uint32_t cvmx_octeon_num_cores(void)
+{
+	uint32_t ciu_fuse = (uint32_t) cvmx_read_csr(CVMX_CIU_FUSE) & 0xffff;
+	return cvmx_pop(ciu_fuse);
+}
+
+/**
+ * Read a byte of fuse data
+ * @byte_addr:   address to read
+ *
+ * Returns fuse value: 0 or 1
+ */
+static uint8_t cvmx_fuse_read_byte(int byte_addr)
+{
+	union cvmx_mio_fus_rcmd read_cmd;
+
+	read_cmd.u64 = 0;
+	read_cmd.s.addr = byte_addr;
+	read_cmd.s.pend = 1;
+	cvmx_write_csr(CVMX_MIO_FUS_RCMD, read_cmd.u64);
+	while ((read_cmd.u64 = cvmx_read_csr(CVMX_MIO_FUS_RCMD))
+	       && read_cmd.s.pend)
+		;
+	return read_cmd.s.dat;
+}
+
+/**
+ * Read a single fuse bit
+ *
+ * @fuse:   Fuse number (0-1024)
+ *
+ * Returns fuse value: 0 or 1
+ */
+static inline int cvmx_fuse_read(int fuse)
+{
+	return (cvmx_fuse_read_byte(fuse >> 3) >> (fuse & 0x7)) & 1;
+}
+
+static inline int cvmx_octeon_model_CN36XX(void)
+{
+	return OCTEON_IS_MODEL(OCTEON_CN38XX)
+		&& !cvmx_octeon_is_pass1()
+		&& cvmx_fuse_read(264);
+}
+
+static inline int cvmx_octeon_zip_present(void)
+{
+	return octeon_has_feature(OCTEON_FEATURE_ZIP);
+}
+
+static inline int cvmx_octeon_dfa_present(void)
+{
+	if (!OCTEON_IS_MODEL(OCTEON_CN38XX)
+	    && !OCTEON_IS_MODEL(OCTEON_CN31XX)
+	    && !OCTEON_IS_MODEL(OCTEON_CN58XX))
+		return 0;
+	else if (OCTEON_IS_MODEL(OCTEON_CN3020))
+		return 0;
+	else if (cvmx_octeon_is_pass1())
+		return 1;
+	else
+		return !cvmx_fuse_read(120);
+}
+
+static inline int cvmx_octeon_crypto_present(void)
+{
+	return octeon_has_feature(OCTEON_FEATURE_CRYPTO);
+}
+
+#endif /*  __CVMX_H__  */
diff --git a/arch/mips/include/asm/octeon/octeon-feature.h b/arch/mips/include/asm/octeon/octeon-feature.h
new file mode 100644
index 00000000000..04fac684069
--- /dev/null
+++ b/arch/mips/include/asm/octeon/octeon-feature.h
@@ -0,0 +1,119 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ * File defining checks for different Octeon features.
+ */
+
+#ifndef __OCTEON_FEATURE_H__
+#define __OCTEON_FEATURE_H__
+
+enum octeon_feature {
+	/*
+	 * Octeon models in the CN5XXX family and higher support
+	 * atomic add instructions to memory (saa/saad).
+	 */
+	OCTEON_FEATURE_SAAD,
+	/* Does this Octeon support the ZIP offload engine? */
+	OCTEON_FEATURE_ZIP,
+	/* Does this Octeon support crypto acceleration using COP2? */
+	OCTEON_FEATURE_CRYPTO,
+	/* Does this Octeon support PCI express? */
+	OCTEON_FEATURE_PCIE,
+	/* Some Octeon models support internal memory for storing
+	 * cryptographic keys */
+	OCTEON_FEATURE_KEY_MEMORY,
+	/* Octeon has a LED controller for banks of external LEDs */
+	OCTEON_FEATURE_LED_CONTROLLER,
+	/* Octeon has a trace buffer */
+	OCTEON_FEATURE_TRA,
+	/* Octeon has a management port */
+	OCTEON_FEATURE_MGMT_PORT,
+	/* Octeon has a raid unit */
+	OCTEON_FEATURE_RAID,
+	/* Octeon has a builtin USB */
+	OCTEON_FEATURE_USB,
+};
+
+static inline int cvmx_fuse_read(int fuse);
+
+/**
+ * Determine if the current Octeon supports a specific feature. These
+ * checks have been optimized to be fairly quick, but they should still
+ * be kept out of fast path code.
+ *
+ * @feature: Feature to check for. This should always be a constant so the
+ *                compiler can remove the switch statement through optimization.
+ *
+ * Returns Non zero if the feature exists. Zero if the feature does not
+ *         exist.
+ */
+static inline int octeon_has_feature(enum octeon_feature feature)
+{
+	switch (feature) {
+	case OCTEON_FEATURE_SAAD:
+		return !OCTEON_IS_MODEL(OCTEON_CN3XXX);
+
+	case OCTEON_FEATURE_ZIP:
+		if (OCTEON_IS_MODEL(OCTEON_CN30XX)
+		    || OCTEON_IS_MODEL(OCTEON_CN50XX)
+		    || OCTEON_IS_MODEL(OCTEON_CN52XX))
+			return 0;
+		else if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS1))
+			return 1;
+		else
+			return !cvmx_fuse_read(121);
+
+	case OCTEON_FEATURE_CRYPTO:
+		return !cvmx_fuse_read(90);
+
+	case OCTEON_FEATURE_PCIE:
+		return OCTEON_IS_MODEL(OCTEON_CN56XX)
+			|| OCTEON_IS_MODEL(OCTEON_CN52XX);
+
+	case OCTEON_FEATURE_KEY_MEMORY:
+	case OCTEON_FEATURE_LED_CONTROLLER:
+		return OCTEON_IS_MODEL(OCTEON_CN38XX)
+			|| OCTEON_IS_MODEL(OCTEON_CN58XX)
+			|| OCTEON_IS_MODEL(OCTEON_CN56XX);
+	case OCTEON_FEATURE_TRA:
+		return !(OCTEON_IS_MODEL(OCTEON_CN30XX)
+			 || OCTEON_IS_MODEL(OCTEON_CN50XX));
+	case OCTEON_FEATURE_MGMT_PORT:
+		return OCTEON_IS_MODEL(OCTEON_CN56XX)
+			|| OCTEON_IS_MODEL(OCTEON_CN52XX);
+	case OCTEON_FEATURE_RAID:
+		return OCTEON_IS_MODEL(OCTEON_CN56XX)
+			|| OCTEON_IS_MODEL(OCTEON_CN52XX);
+	case OCTEON_FEATURE_USB:
+		return !(OCTEON_IS_MODEL(OCTEON_CN38XX)
+			 || OCTEON_IS_MODEL(OCTEON_CN58XX));
+	}
+	return 0;
+}
+
+#endif /* __OCTEON_FEATURE_H__ */
diff --git a/arch/mips/include/asm/octeon/octeon-model.h b/arch/mips/include/asm/octeon/octeon-model.h
new file mode 100644
index 00000000000..cf50336eca2
--- /dev/null
+++ b/arch/mips/include/asm/octeon/octeon-model.h
@@ -0,0 +1,321 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/*
+ *
+ * File defining different Octeon model IDs and macros to
+ * compare them.
+ *
+ */
+
+#ifndef __OCTEON_MODEL_H__
+#define __OCTEON_MODEL_H__
+
+/* NOTE: These must match what is checked in common-config.mk */
+/* Defines to represent the different versions of Octeon.  */
+
+/*
+ * IMPORTANT: When the default pass is updated for an Octeon Model,
+ * the corresponding change must also be made in the oct-sim script.
+ */
+
+/*
+ * The defines below should be used with the OCTEON_IS_MODEL() macro
+ * to determine what model of chip the software is running on.  Models
+ * ending in 'XX' match multiple models (families), while specific
+ * models match only that model.  If a pass (revision) is specified,
+ * then only that revision will be matched.  Care should be taken when
+ * checking for both specific models and families that the specific
+ * models are checked for first.  While these defines are similar to
+ * the processor ID, they are not intended to be used by anything
+ * other that the OCTEON_IS_MODEL framework, and the values are
+ * subject to change at anytime without notice.
+ *
+ * NOTE: only the OCTEON_IS_MODEL() macro/function and the OCTEON_CN*
+ * macros should be used outside of this file.  All other macros are
+ * for internal use only, and may change without notice.
+ */
+
+/* Flag bits in top byte */
+/* Ignores revision in model checks */
+#define OM_IGNORE_REVISION        0x01000000
+/* Check submodels */
+#define OM_CHECK_SUBMODEL         0x02000000
+/* Match all models previous than the one specified */
+#define OM_MATCH_PREVIOUS_MODELS  0x04000000
+/* Ignores the minor revison on newer parts */
+#define OM_IGNORE_MINOR_REVISION  0x08000000
+#define OM_FLAG_MASK              0xff000000
+
+/*
+ * CN5XXX models with new revision encoding
+ */
+#define OCTEON_CN58XX_PASS1_0   0x000d0300
+#define OCTEON_CN58XX_PASS1_1   0x000d0301
+#define OCTEON_CN58XX_PASS1_2   0x000d0303
+#define OCTEON_CN58XX_PASS2_0   0x000d0308
+#define OCTEON_CN58XX_PASS2_1   0x000d0309
+#define OCTEON_CN58XX_PASS2_2   0x000d030a
+#define OCTEON_CN58XX_PASS2_3   0x000d030b
+
+#define OCTEON_CN58XX           (OCTEON_CN58XX_PASS1_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN58XX_PASS1_X   (OCTEON_CN58XX_PASS1_0 \
+				 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN58XX_PASS2_X   (OCTEON_CN58XX_PASS2_0 \
+				 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN58XX_PASS1     OCTEON_CN58XX_PASS1_X
+#define OCTEON_CN58XX_PASS2     OCTEON_CN58XX_PASS2_X
+
+#define OCTEON_CN56XX_PASS1_0   0x000d0400
+#define OCTEON_CN56XX_PASS1_1   0x000d0401
+#define OCTEON_CN56XX_PASS2_0   0x000d0408
+#define OCTEON_CN56XX_PASS2_1   0x000d0409
+
+#define OCTEON_CN56XX           (OCTEON_CN56XX_PASS2_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN56XX_PASS1_X   (OCTEON_CN56XX_PASS1_0 \
+				 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN56XX_PASS2_X   (OCTEON_CN56XX_PASS2_0 \
+				 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN56XX_PASS1     OCTEON_CN56XX_PASS1_X
+#define OCTEON_CN56XX_PASS2     OCTEON_CN56XX_PASS2_X
+
+#define OCTEON_CN57XX           OCTEON_CN56XX
+#define OCTEON_CN57XX_PASS1     OCTEON_CN56XX_PASS1
+#define OCTEON_CN57XX_PASS2     OCTEON_CN56XX_PASS2
+
+#define OCTEON_CN55XX           OCTEON_CN56XX
+#define OCTEON_CN55XX_PASS1     OCTEON_CN56XX_PASS1
+#define OCTEON_CN55XX_PASS2     OCTEON_CN56XX_PASS2
+
+#define OCTEON_CN54XX           OCTEON_CN56XX
+#define OCTEON_CN54XX_PASS1     OCTEON_CN56XX_PASS1
+#define OCTEON_CN54XX_PASS2     OCTEON_CN56XX_PASS2
+
+#define OCTEON_CN50XX_PASS1_0   0x000d0600
+
+#define OCTEON_CN50XX           (OCTEON_CN50XX_PASS1_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN50XX_PASS1_X   (OCTEON_CN50XX_PASS1_0 \
+				 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN50XX_PASS1     OCTEON_CN50XX_PASS1_X
+
+/*
+ * NOTE: Octeon CN5000F model is not identifiable using the
+ * OCTEON_IS_MODEL() functions, but are treated as CN50XX.
+ */
+
+#define OCTEON_CN52XX_PASS1_0   0x000d0700
+#define OCTEON_CN52XX_PASS2_0   0x000d0708
+
+#define OCTEON_CN52XX           (OCTEON_CN52XX_PASS2_0 | OM_IGNORE_REVISION)
+#define OCTEON_CN52XX_PASS1_X   (OCTEON_CN52XX_PASS1_0 \
+				 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN52XX_PASS2_X   (OCTEON_CN52XX_PASS2_0 \
+				 | OM_IGNORE_MINOR_REVISION)
+#define OCTEON_CN52XX_PASS1     OCTEON_CN52XX_PASS1_X
+#define OCTEON_CN52XX_PASS2     OCTEON_CN52XX_PASS2_X
+
+/*
+ * CN3XXX models with old revision enconding
+ */
+#define OCTEON_CN38XX_PASS1     0x000d0000
+#define OCTEON_CN38XX_PASS2     0x000d0001
+#define OCTEON_CN38XX_PASS3     0x000d0003
+#define OCTEON_CN38XX           (OCTEON_CN38XX_PASS3 | OM_IGNORE_REVISION)
+
+#define OCTEON_CN36XX           OCTEON_CN38XX
+#define OCTEON_CN36XX_PASS2     OCTEON_CN38XX_PASS2
+#define OCTEON_CN36XX_PASS3     OCTEON_CN38XX_PASS3
+
+/* The OCTEON_CN31XX matches CN31XX models and the CN3020 */
+#define OCTEON_CN31XX_PASS1     0x000d0100
+#define OCTEON_CN31XX_PASS1_1   0x000d0102
+#define OCTEON_CN31XX           (OCTEON_CN31XX_PASS1 | OM_IGNORE_REVISION)
+
+/*
+ * This model is only used for internal checks, it is not a valid
+ * model for the OCTEON_MODEL environment variable.  This matches the
+ * CN3010 and CN3005 but NOT the CN3020.
+ */
+#define OCTEON_CN30XX_PASS1     0x000d0200
+#define OCTEON_CN30XX_PASS1_1   0x000d0202
+#define OCTEON_CN30XX           (OCTEON_CN30XX_PASS1 | OM_IGNORE_REVISION)
+
+#define OCTEON_CN3005_PASS1     (0x000d0210 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3005_PASS1_0   (0x000d0210 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3005_PASS1_1   (0x000d0212 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3005           (OCTEON_CN3005_PASS1 | OM_IGNORE_REVISION \
+				 | OM_CHECK_SUBMODEL)
+
+#define OCTEON_CN3010_PASS1     (0x000d0200 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3010_PASS1_0   (0x000d0200 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3010_PASS1_1   (0x000d0202 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3010           (OCTEON_CN3010_PASS1 | OM_IGNORE_REVISION \
+				 | OM_CHECK_SUBMODEL)
+
+#define OCTEON_CN3020_PASS1     (0x000d0110 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3020_PASS1_0   (0x000d0110 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3020_PASS1_1   (0x000d0112 | OM_CHECK_SUBMODEL)
+#define OCTEON_CN3020           (OCTEON_CN3020_PASS1 | OM_IGNORE_REVISION \
+				 | OM_CHECK_SUBMODEL)
+
+
+
+/* This matches the complete family of CN3xxx CPUs, and not subsequent models */
+#define OCTEON_CN3XXX           (OCTEON_CN58XX_PASS1_0 \
+				 | OM_MATCH_PREVIOUS_MODELS \
+				 | OM_IGNORE_REVISION)
+
+/* The revision byte (low byte) has two different encodings.
+ * CN3XXX:
+ *
+ *     bits
+ *     <7:5>: reserved (0)
+ *     <4>:   alternate package
+ *     <3:0>: revision
+ *
+ * CN5XXX:
+ *
+ *     bits
+ *     <7>:   reserved (0)
+ *     <6>:   alternate package
+ *     <5:3>: major revision
+ *     <2:0>: minor revision
+ *
+ */
+
+/* Masks used for the various types of model/family/revision matching */
+#define OCTEON_38XX_FAMILY_MASK      0x00ffff00
+#define OCTEON_38XX_FAMILY_REV_MASK  0x00ffff0f
+#define OCTEON_38XX_MODEL_MASK       0x00ffff10
+#define OCTEON_38XX_MODEL_REV_MASK   (OCTEON_38XX_FAMILY_REV_MASK \
+				      | OCTEON_38XX_MODEL_MASK)
+
+/* CN5XXX and later use different layout of bits in the revision ID field */
+#define OCTEON_58XX_FAMILY_MASK      OCTEON_38XX_FAMILY_MASK
+#define OCTEON_58XX_FAMILY_REV_MASK  0x00ffff3f
+#define OCTEON_58XX_MODEL_MASK       0x00ffffc0
+#define OCTEON_58XX_MODEL_REV_MASK   (OCTEON_58XX_FAMILY_REV_MASK \
+				      | OCTEON_58XX_MODEL_MASK)
+#define OCTEON_58XX_MODEL_MINOR_REV_MASK (OCTEON_58XX_MODEL_REV_MASK \
+					  & 0x00fffff8)
+
+#define __OCTEON_MATCH_MASK__(x, y, z) (((x) & (z)) == ((y) & (z)))
+
+/* NOTE: This is for internal (to this file) use only. */
+static inline int __OCTEON_IS_MODEL_COMPILE__(uint32_t arg_model,
+					      uint32_t chip_model)
+{
+	uint32_t rev_and_sub = OM_IGNORE_REVISION | OM_CHECK_SUBMODEL;
+
+	if ((arg_model & OCTEON_38XX_FAMILY_MASK) < OCTEON_CN58XX_PASS1_0) {
+		if (((arg_model & OM_FLAG_MASK) == rev_and_sub) &&
+		    __OCTEON_MATCH_MASK__(chip_model, arg_model,
+					  OCTEON_38XX_MODEL_MASK))
+			return 1;
+		if (((arg_model & OM_FLAG_MASK) == 0) &&
+		    __OCTEON_MATCH_MASK__(chip_model, arg_model,
+					  OCTEON_38XX_FAMILY_REV_MASK))
+			return 1;
+		if (((arg_model & OM_FLAG_MASK) == OM_IGNORE_REVISION) &&
+		    __OCTEON_MATCH_MASK__(chip_model, arg_model,
+					  OCTEON_38XX_FAMILY_MASK))
+			return 1;
+		if (((arg_model & OM_FLAG_MASK) == OM_CHECK_SUBMODEL) &&
+		    __OCTEON_MATCH_MASK__((chip_model), (arg_model),
+					  OCTEON_38XX_MODEL_REV_MASK))
+			return 1;
+		if ((arg_model & OM_MATCH_PREVIOUS_MODELS) &&
+		    ((chip_model & OCTEON_38XX_MODEL_MASK) <
+			    (arg_model & OCTEON_38XX_MODEL_MASK)))
+			return 1;
+	} else {
+		if (((arg_model & OM_FLAG_MASK) == rev_and_sub) &&
+		    __OCTEON_MATCH_MASK__((chip_model), (arg_model),
+					  OCTEON_58XX_MODEL_MASK))
+			return 1;
+		if (((arg_model & OM_FLAG_MASK) == 0) &&
+		    __OCTEON_MATCH_MASK__((chip_model), (arg_model),
+					  OCTEON_58XX_FAMILY_REV_MASK))
+			return 1;
+		if (((arg_model & OM_FLAG_MASK) == OM_IGNORE_MINOR_REVISION) &&
+		    __OCTEON_MATCH_MASK__((chip_model), (arg_model),
+					  OCTEON_58XX_MODEL_MINOR_REV_MASK))
+			return 1;
+		if (((arg_model & OM_FLAG_MASK) == OM_IGNORE_REVISION) &&
+		    __OCTEON_MATCH_MASK__((chip_model), (arg_model),
+					  OCTEON_58XX_FAMILY_MASK))
+			return 1;
+		if (((arg_model & OM_FLAG_MASK) == OM_CHECK_SUBMODEL) &&
+		    __OCTEON_MATCH_MASK__((chip_model), (arg_model),
+					  OCTEON_58XX_MODEL_REV_MASK))
+			return 1;
+		if ((arg_model & OM_MATCH_PREVIOUS_MODELS) &&
+		    ((chip_model & OCTEON_58XX_MODEL_MASK) <
+			    (arg_model & OCTEON_58XX_MODEL_MASK)))
+			return 1;
+	}
+	return 0;
+}
+
+/* forward declarations */
+static inline uint32_t cvmx_get_proc_id(void) __attribute__ ((pure));
+static inline uint64_t cvmx_read_csr(uint64_t csr_addr);
+
+/* NOTE: This for internal use only!!!!! */
+static inline int __octeon_is_model_runtime__(uint32_t model)
+{
+	uint32_t cpuid = cvmx_get_proc_id();
+
+	/*
+	 * Check for special case of mismarked 3005 samples. We only
+	 * need to check if the sub model isn't being ignored.
+	 */
+	if ((model & OM_CHECK_SUBMODEL) == OM_CHECK_SUBMODEL) {
+		if (cpuid == OCTEON_CN3010_PASS1 \
+		    && (cvmx_read_csr(0x80011800800007B8ull) & (1ull << 34)))
+			cpuid |= 0x10;
+	}
+	return __OCTEON_IS_MODEL_COMPILE__(model, cpuid);
+}
+
+/*
+ * The OCTEON_IS_MODEL macro should be used for all Octeon model
+ * checking done in a program.  This should be kept runtime if at all
+ * possible.  Any compile time (#if OCTEON_IS_MODEL) usage must be
+ * condtionalized with OCTEON_IS_COMMON_BINARY() if runtime checking
+ * support is required.
+ */
+#define OCTEON_IS_MODEL(x) __octeon_is_model_runtime__(x)
+#define OCTEON_IS_COMMON_BINARY() 1
+#undef OCTEON_MODEL
+
+const char *octeon_model_get_string(uint32_t chip_id);
+const char *octeon_model_get_string_buffer(uint32_t chip_id, char *buffer);
+
+#include "octeon-feature.h"
+
+#endif /* __OCTEON_MODEL_H__ */
-- 
GitLab


From 5b3b16880f404ca54126210ca86141cceeafc0cf Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 8 Jan 2009 16:46:40 -0800
Subject: [PATCH 116/492] MIPS: Add Cavium OCTEON processor support files to
 arch/mips/cavium-octeon.

These are the rest of the new files needed to add OCTEON processor
support to the Linux kernel.  Other than Makefile and Kconfig which
should be obvious, we have:

csrc-octeon.c   -- Clock source driver for OCTEON.
dma-octeon.c    -- Helper functions for mapping DMA memory.
flash_setup.c   -- Register on-board flash with the MTD subsystem.
octeon-irq.c    -- OCTEON interrupt controller managment.
octeon-memcpy.S -- Optimized memcpy() implementation.
serial.c        -- Register 8250 platform driver and early console.
setup.c         -- Early architecture initialization.
smp.c           -- OCTEON SMP support.
octeon_switch.S -- Scheduler context switch for OCTEON.
c-octeon.c      -- OCTEON cache controller support.
cex-oct.S       -- OCTEON cache exception handler.

asm/mach-cavium-octeon/*.h -- Architecture include files.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/cavium-octeon/Kconfig
 create mode 100644 arch/mips/cavium-octeon/Makefile
 create mode 100644 arch/mips/cavium-octeon/csrc-octeon.c
 create mode 100644 arch/mips/cavium-octeon/dma-octeon.c
 create mode 100644 arch/mips/cavium-octeon/flash_setup.c
 create mode 100644 arch/mips/cavium-octeon/octeon-irq.c
 create mode 100644 arch/mips/cavium-octeon/octeon-memcpy.S
 create mode 100644 arch/mips/cavium-octeon/serial.c
 create mode 100644 arch/mips/cavium-octeon/setup.c
 create mode 100644 arch/mips/cavium-octeon/smp.c
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/irq.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/war.h
 create mode 100644 arch/mips/include/asm/octeon/octeon.h
 create mode 100644 arch/mips/kernel/octeon_switch.S
 create mode 100644 arch/mips/mm/c-octeon.c
 create mode 100644 arch/mips/mm/cex-oct.S
---
 arch/mips/cavium-octeon/Kconfig               |  85 ++
 arch/mips/cavium-octeon/Makefile              |  16 +
 arch/mips/cavium-octeon/csrc-octeon.c         |  58 ++
 arch/mips/cavium-octeon/dma-octeon.c          |  32 +
 arch/mips/cavium-octeon/flash_setup.c         |  84 ++
 arch/mips/cavium-octeon/octeon-irq.c          | 497 ++++++++++
 arch/mips/cavium-octeon/octeon-memcpy.S       | 521 ++++++++++
 arch/mips/cavium-octeon/serial.c              | 136 +++
 arch/mips/cavium-octeon/setup.c               | 929 ++++++++++++++++++
 arch/mips/cavium-octeon/smp.c                 | 211 ++++
 .../cpu-feature-overrides.h                   |  78 ++
 .../asm/mach-cavium-octeon/dma-coherence.h    |  64 ++
 .../mips/include/asm/mach-cavium-octeon/irq.h | 244 +++++
 .../mach-cavium-octeon/kernel-entry-init.h    | 131 +++
 .../mips/include/asm/mach-cavium-octeon/war.h |  26 +
 arch/mips/include/asm/octeon/octeon.h         | 248 +++++
 arch/mips/kernel/octeon_switch.S              | 506 ++++++++++
 arch/mips/mm/c-octeon.c                       | 307 ++++++
 arch/mips/mm/cex-oct.S                        |  70 ++
 19 files changed, 4243 insertions(+)
 create mode 100644 arch/mips/cavium-octeon/Kconfig
 create mode 100644 arch/mips/cavium-octeon/Makefile
 create mode 100644 arch/mips/cavium-octeon/csrc-octeon.c
 create mode 100644 arch/mips/cavium-octeon/dma-octeon.c
 create mode 100644 arch/mips/cavium-octeon/flash_setup.c
 create mode 100644 arch/mips/cavium-octeon/octeon-irq.c
 create mode 100644 arch/mips/cavium-octeon/octeon-memcpy.S
 create mode 100644 arch/mips/cavium-octeon/serial.c
 create mode 100644 arch/mips/cavium-octeon/setup.c
 create mode 100644 arch/mips/cavium-octeon/smp.c
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/irq.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
 create mode 100644 arch/mips/include/asm/mach-cavium-octeon/war.h
 create mode 100644 arch/mips/include/asm/octeon/octeon.h
 create mode 100644 arch/mips/kernel/octeon_switch.S
 create mode 100644 arch/mips/mm/c-octeon.c
 create mode 100644 arch/mips/mm/cex-oct.S

diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
new file mode 100644
index 00000000000..094c17e38e1
--- /dev/null
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -0,0 +1,85 @@
+config CAVIUM_OCTEON_SPECIFIC_OPTIONS
+	bool "Enable Octeon specific options"
+	depends on CPU_CAVIUM_OCTEON
+	default "y"
+
+config CAVIUM_OCTEON_2ND_KERNEL
+	bool "Build the kernel to be used as a 2nd kernel on the same chip"
+	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
+	default "n"
+	help
+	  This option configures this kernel to be linked at a different
+	  address and use the 2nd uart for output. This allows a kernel built
+	  with this option to be run at the same time as one built without this
+	  option.
+
+config CAVIUM_OCTEON_HW_FIX_UNALIGNED
+	bool "Enable hardware fixups of unaligned loads and stores"
+	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
+	default "y"
+	help
+	  Configure the Octeon hardware to automatically fix unaligned loads
+	  and stores. Normally unaligned accesses are fixed using a kernel
+	  exception handler. This option enables the hardware automatic fixups,
+	  which requires only an extra 3 cycles. Disable this option if you
+	  are running code that relies on address exceptions on unaligned
+	  accesses.
+
+config CAVIUM_OCTEON_CVMSEG_SIZE
+	int "Number of L1 cache lines reserved for CVMSEG memory"
+	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
+	range 0 54
+	default 1
+	help
+	  CVMSEG LM is a segment that accesses portions of the dcache as a
+	  local memory; the larger CVMSEG is, the smaller the cache is.
+	  This selects the size of CVMSEG LM, which is in cache blocks. The
+	  legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
+	  between zero and 6192 bytes).
+
+config CAVIUM_OCTEON_LOCK_L2
+	bool "Lock often used kernel code in the L2"
+	depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
+	default "y"
+	help
+	  Enable locking parts of the kernel into the L2 cache.
+
+config CAVIUM_OCTEON_LOCK_L2_TLB
+	bool "Lock the TLB handler in L2"
+	depends on CAVIUM_OCTEON_LOCK_L2
+	default "y"
+	help
+	  Lock the low level TLB fast path into L2.
+
+config CAVIUM_OCTEON_LOCK_L2_EXCEPTION
+	bool "Lock the exception handler in L2"
+	depends on CAVIUM_OCTEON_LOCK_L2
+	default "y"
+	help
+	  Lock the low level exception handler into L2.
+
+config CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT
+	bool "Lock the interrupt handler in L2"
+	depends on CAVIUM_OCTEON_LOCK_L2
+	default "y"
+	help
+	  Lock the low level interrupt handler into L2.
+
+config CAVIUM_OCTEON_LOCK_L2_INTERRUPT
+	bool "Lock the 2nd level interrupt handler in L2"
+	depends on CAVIUM_OCTEON_LOCK_L2
+	default "y"
+	help
+	  Lock the 2nd level interrupt handler in L2.
+
+config CAVIUM_OCTEON_LOCK_L2_MEMCPY
+	bool "Lock memcpy() in L2"
+	depends on CAVIUM_OCTEON_LOCK_L2
+	default "y"
+	help
+	  Lock the kernel's implementation of memcpy() into L2.
+
+config ARCH_SPARSEMEM_ENABLE
+	def_bool y
+	select SPARSEMEM_STATIC
+	depends on CPU_CAVIUM_OCTEON
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
new file mode 100644
index 00000000000..1c2a7faf588
--- /dev/null
+++ b/arch/mips/cavium-octeon/Makefile
@@ -0,0 +1,16 @@
+#
+# Makefile for the Cavium Octeon specific kernel interface routines
+# under Linux.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2005-2008 Cavium Networks
+#
+
+obj-y := setup.o serial.o octeon-irq.o csrc-octeon.o
+obj-y += dma-octeon.o flash_setup.o
+obj-y += octeon-memcpy.o
+
+obj-$(CONFIG_SMP)                     += smp.o
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
new file mode 100644
index 00000000000..70fd92c3165
--- /dev/null
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -0,0 +1,58 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007 by Ralf Baechle
+ */
+#include <linux/clocksource.h>
+#include <linux/init.h>
+
+#include <asm/time.h>
+
+#include <asm/octeon/octeon.h>
+#include <asm/octeon/cvmx-ipd-defs.h>
+
+/*
+ * Set the current core's cvmcount counter to the value of the
+ * IPD_CLK_COUNT.  We do this on all cores as they are brought
+ * on-line.  This allows for a read from a local cpu register to
+ * access a synchronized counter.
+ *
+ */
+void octeon_init_cvmcount(void)
+{
+	unsigned long flags;
+	unsigned loops = 2;
+
+	/* Clobber loops so GCC will not unroll the following while loop. */
+	asm("" : "+r" (loops));
+
+	local_irq_save(flags);
+	/*
+	 * Loop several times so we are executing from the cache,
+	 * which should give more deterministic timing.
+	 */
+	while (loops--)
+		write_c0_cvmcount(cvmx_read_csr(CVMX_IPD_CLK_COUNT));
+	local_irq_restore(flags);
+}
+
+static cycle_t octeon_cvmcount_read(void)
+{
+	return read_c0_cvmcount();
+}
+
+static struct clocksource clocksource_mips = {
+	.name		= "OCTEON_CVMCOUNT",
+	.read		= octeon_cvmcount_read,
+	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+void __init plat_time_init(void)
+{
+	clocksource_mips.rating = 300;
+	clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
+	clocksource_register(&clocksource_mips);
+}
diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
new file mode 100644
index 00000000000..01b1ef94b36
--- /dev/null
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -0,0 +1,32 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000  Ani Joshi <ajoshi@unixbox.com>
+ * Copyright (C) 2000, 2001  Ralf Baechle <ralf@gnu.org>
+ * Copyright (C) 2005 Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
+ * swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
+ * IP32 changes by Ilya.
+ * Cavium Networks: Create new dma setup for Cavium Networks Octeon based on
+ * the kernels original.
+ */
+#include <linux/types.h>
+#include <linux/mm.h>
+
+#include <dma-coherence.h>
+
+dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size)
+{
+	/* Without PCI/PCIe this function can be called for Octeon internal
+	   devices such as USB. These devices all support 64bit addressing */
+	mb();
+	return virt_to_phys(ptr);
+}
+
+void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
+{
+	/* Without PCI/PCIe this function can be called for Octeon internal
+	 * devices such as USB. These devices all support 64bit addressing */
+	return;
+}
diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c
new file mode 100644
index 00000000000..553d36cbcc4
--- /dev/null
+++ b/arch/mips/cavium-octeon/flash_setup.c
@@ -0,0 +1,84 @@
+/*
+ *   Octeon Bootbus flash setup
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2007, 2008 Cavium Networks
+ */
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/octeon/octeon.h>
+
+static struct map_info flash_map;
+static struct mtd_info *mymtd;
+#ifdef CONFIG_MTD_PARTITIONS
+static int nr_parts;
+static struct mtd_partition *parts;
+static const char *part_probe_types[] = {
+	"cmdlinepart",
+#ifdef CONFIG_MTD_REDBOOT_PARTS
+	"RedBoot",
+#endif
+	NULL
+};
+#endif
+
+/**
+ * Module/ driver initialization.
+ *
+ * Returns Zero on success
+ */
+static int __init flash_init(void)
+{
+	/*
+	 * Read the bootbus region 0 setup to determine the base
+	 * address of the flash.
+	 */
+	union cvmx_mio_boot_reg_cfgx region_cfg;
+	region_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(0));
+	if (region_cfg.s.en) {
+		/*
+		 * The bootloader always takes the flash and sets its
+		 * address so the entire flash fits below
+		 * 0x1fc00000. This way the flash aliases to
+		 * 0x1fc00000 for booting. Software can access the
+		 * full flash at the true address, while core boot can
+		 * access 4MB.
+		 */
+		/* Use this name so old part lines work */
+		flash_map.name = "phys_mapped_flash";
+		flash_map.phys = region_cfg.s.base << 16;
+		flash_map.size = 0x1fc00000 - flash_map.phys;
+		flash_map.bankwidth = 1;
+		flash_map.virt = ioremap(flash_map.phys, flash_map.size);
+		pr_notice("Bootbus flash: Setting flash for %luMB flash at "
+			  "0x%08lx\n", flash_map.size >> 20, flash_map.phys);
+		simple_map_init(&flash_map);
+		mymtd = do_map_probe("cfi_probe", &flash_map);
+		if (mymtd) {
+			mymtd->owner = THIS_MODULE;
+
+#ifdef CONFIG_MTD_PARTITIONS
+			nr_parts = parse_mtd_partitions(mymtd,
+							part_probe_types,
+							&parts, 0);
+			if (nr_parts > 0)
+				add_mtd_partitions(mymtd, parts, nr_parts);
+			else
+				add_mtd_device(mymtd);
+#else
+			add_mtd_device(mymtd);
+#endif
+		} else {
+			pr_err("Failed to register MTD device for flash\n");
+		}
+	}
+	return 0;
+}
+
+late_initcall(flash_init);
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
new file mode 100644
index 00000000000..fc72984a5da
--- /dev/null
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -0,0 +1,497 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2008 Cavium Networks
+ */
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/hardirq.h>
+
+#include <asm/octeon/octeon.h>
+
+DEFINE_RWLOCK(octeon_irq_ciu0_rwlock);
+DEFINE_RWLOCK(octeon_irq_ciu1_rwlock);
+DEFINE_SPINLOCK(octeon_irq_msi_lock);
+
+static void octeon_irq_core_ack(unsigned int irq)
+{
+	unsigned int bit = irq - OCTEON_IRQ_SW0;
+	/*
+	 * We don't need to disable IRQs to make these atomic since
+	 * they are already disabled earlier in the low level
+	 * interrupt code.
+	 */
+	clear_c0_status(0x100 << bit);
+	/* The two user interrupts must be cleared manually. */
+	if (bit < 2)
+		clear_c0_cause(0x100 << bit);
+}
+
+static void octeon_irq_core_eoi(unsigned int irq)
+{
+	irq_desc_t *desc = irq_desc + irq;
+	unsigned int bit = irq - OCTEON_IRQ_SW0;
+	/*
+	 * If an IRQ is being processed while we are disabling it the
+	 * handler will attempt to unmask the interrupt after it has
+	 * been disabled.
+	 */
+	if (desc->status & IRQ_DISABLED)
+		return;
+
+	/* There is a race here.  We should fix it.  */
+
+	/*
+	 * We don't need to disable IRQs to make these atomic since
+	 * they are already disabled earlier in the low level
+	 * interrupt code.
+	 */
+	set_c0_status(0x100 << bit);
+}
+
+static void octeon_irq_core_enable(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned int bit = irq - OCTEON_IRQ_SW0;
+
+	/*
+	 * We need to disable interrupts to make sure our updates are
+	 * atomic.
+	 */
+	local_irq_save(flags);
+	set_c0_status(0x100 << bit);
+	local_irq_restore(flags);
+}
+
+static void octeon_irq_core_disable_local(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned int bit = irq - OCTEON_IRQ_SW0;
+	/*
+	 * We need to disable interrupts to make sure our updates are
+	 * atomic.
+	 */
+	local_irq_save(flags);
+	clear_c0_status(0x100 << bit);
+	local_irq_restore(flags);
+}
+
+static void octeon_irq_core_disable(unsigned int irq)
+{
+#ifdef CONFIG_SMP
+	on_each_cpu((void (*)(void *)) octeon_irq_core_disable_local,
+		    (void *) (long) irq, 1);
+#else
+	octeon_irq_core_disable_local(irq);
+#endif
+}
+
+static struct irq_chip octeon_irq_chip_core = {
+	.name = "Core",
+	.enable = octeon_irq_core_enable,
+	.disable = octeon_irq_core_disable,
+	.ack = octeon_irq_core_ack,
+	.eoi = octeon_irq_core_eoi,
+};
+
+
+static void octeon_irq_ciu0_ack(unsigned int irq)
+{
+	/*
+	 * In order to avoid any locking accessing the CIU, we
+	 * acknowledge CIU interrupts by disabling all of them.  This
+	 * way we can use a per core register and avoid any out of
+	 * core locking requirements.  This has the side affect that
+	 * CIU interrupts can't be processed recursively.
+	 *
+	 * We don't need to disable IRQs to make these atomic since
+	 * they are already disabled earlier in the low level
+	 * interrupt code.
+	 */
+	clear_c0_status(0x100 << 2);
+}
+
+static void octeon_irq_ciu0_eoi(unsigned int irq)
+{
+	/*
+	 * Enable all CIU interrupts again.  We don't need to disable
+	 * IRQs to make these atomic since they are already disabled
+	 * earlier in the low level interrupt code.
+	 */
+	set_c0_status(0x100 << 2);
+}
+
+static void octeon_irq_ciu0_enable(unsigned int irq)
+{
+	int coreid = cvmx_get_core_num();
+	unsigned long flags;
+	uint64_t en0;
+	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
+
+	/*
+	 * A read lock is used here to make sure only one core is ever
+	 * updating the CIU enable bits at a time. During an enable
+	 * the cores don't interfere with each other. During a disable
+	 * the write lock stops any enables that might cause a
+	 * problem.
+	 */
+	read_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+	en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
+	en0 |= 1ull << bit;
+	cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
+	cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
+	read_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+}
+
+static void octeon_irq_ciu0_disable(unsigned int irq)
+{
+	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
+	unsigned long flags;
+	uint64_t en0;
+#ifdef CONFIG_SMP
+	int cpu;
+	write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
+	for_each_online_cpu(cpu) {
+		int coreid = cpu_logical_map(cpu);
+		en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
+		en0 &= ~(1ull << bit);
+		cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
+	}
+	/*
+	 * We need to do a read after the last update to make sure all
+	 * of them are done.
+	 */
+	cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
+	write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
+#else
+	int coreid = cvmx_get_core_num();
+	local_irq_save(flags);
+	en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
+	en0 &= ~(1ull << bit);
+	cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
+	cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
+	local_irq_restore(flags);
+#endif
+}
+
+#ifdef CONFIG_SMP
+static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
+{
+	int cpu;
+	int bit = irq - OCTEON_IRQ_WORKQ0;	/* Bit 0-63 of EN0 */
+
+	write_lock(&octeon_irq_ciu0_rwlock);
+	for_each_online_cpu(cpu) {
+		int coreid = cpu_logical_map(cpu);
+		uint64_t en0 =
+			cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
+		if (cpumask_test_cpu(cpu, dest))
+			en0 |= 1ull << bit;
+		else
+			en0 &= ~(1ull << bit);
+		cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
+	}
+	/*
+	 * We need to do a read after the last update to make sure all
+	 * of them are done.
+	 */
+	cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
+	write_unlock(&octeon_irq_ciu0_rwlock);
+}
+#endif
+
+static struct irq_chip octeon_irq_chip_ciu0 = {
+	.name = "CIU0",
+	.enable = octeon_irq_ciu0_enable,
+	.disable = octeon_irq_ciu0_disable,
+	.ack = octeon_irq_ciu0_ack,
+	.eoi = octeon_irq_ciu0_eoi,
+#ifdef CONFIG_SMP
+	.set_affinity = octeon_irq_ciu0_set_affinity,
+#endif
+};
+
+
+static void octeon_irq_ciu1_ack(unsigned int irq)
+{
+	/*
+	 * In order to avoid any locking accessing the CIU, we
+	 * acknowledge CIU interrupts by disabling all of them.  This
+	 * way we can use a per core register and avoid any out of
+	 * core locking requirements.  This has the side affect that
+	 * CIU interrupts can't be processed recursively.  We don't
+	 * need to disable IRQs to make these atomic since they are
+	 * already disabled earlier in the low level interrupt code.
+	 */
+	clear_c0_status(0x100 << 3);
+}
+
+static void octeon_irq_ciu1_eoi(unsigned int irq)
+{
+	/*
+	 * Enable all CIU interrupts again.  We don't need to disable
+	 * IRQs to make these atomic since they are already disabled
+	 * earlier in the low level interrupt code.
+	 */
+	set_c0_status(0x100 << 3);
+}
+
+static void octeon_irq_ciu1_enable(unsigned int irq)
+{
+	int coreid = cvmx_get_core_num();
+	unsigned long flags;
+	uint64_t en1;
+	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
+
+	/*
+	 * A read lock is used here to make sure only one core is ever
+	 * updating the CIU enable bits at a time.  During an enable
+	 * the cores don't interfere with each other.  During a disable
+	 * the write lock stops any enables that might cause a
+	 * problem.
+	 */
+	read_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+	en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
+	en1 |= 1ull << bit;
+	cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
+	cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
+	read_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+}
+
+static void octeon_irq_ciu1_disable(unsigned int irq)
+{
+	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
+	unsigned long flags;
+	uint64_t en1;
+#ifdef CONFIG_SMP
+	int cpu;
+	write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
+	for_each_online_cpu(cpu) {
+		int coreid = cpu_logical_map(cpu);
+		en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
+		en1 &= ~(1ull << bit);
+		cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
+	}
+	/*
+	 * We need to do a read after the last update to make sure all
+	 * of them are done.
+	 */
+	cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
+	write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+#else
+	int coreid = cvmx_get_core_num();
+	local_irq_save(flags);
+	en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
+	en1 &= ~(1ull << bit);
+	cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
+	cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
+	local_irq_restore(flags);
+#endif
+}
+
+#ifdef CONFIG_SMP
+static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
+{
+	int cpu;
+	int bit = irq - OCTEON_IRQ_WDOG0;	/* Bit 0-63 of EN1 */
+
+	write_lock(&octeon_irq_ciu1_rwlock);
+	for_each_online_cpu(cpu) {
+		int coreid = cpu_logical_map(cpu);
+		uint64_t en1 =
+			cvmx_read_csr(CVMX_CIU_INTX_EN1
+				(coreid * 2 + 1));
+		if (cpumask_test_cpu(cpu, dest))
+			en1 |= 1ull << bit;
+		else
+			en1 &= ~(1ull << bit);
+		cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
+	}
+	/*
+	 * We need to do a read after the last update to make sure all
+	 * of them are done.
+	 */
+	cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
+	write_unlock(&octeon_irq_ciu1_rwlock);
+}
+#endif
+
+static struct irq_chip octeon_irq_chip_ciu1 = {
+	.name = "CIU1",
+	.enable = octeon_irq_ciu1_enable,
+	.disable = octeon_irq_ciu1_disable,
+	.ack = octeon_irq_ciu1_ack,
+	.eoi = octeon_irq_ciu1_eoi,
+#ifdef CONFIG_SMP
+	.set_affinity = octeon_irq_ciu1_set_affinity,
+#endif
+};
+
+#ifdef CONFIG_PCI_MSI
+
+static void octeon_irq_msi_ack(unsigned int irq)
+{
+	if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
+		/* These chips have PCI */
+		cvmx_write_csr(CVMX_NPI_NPI_MSI_RCV,
+			       1ull << (irq - OCTEON_IRQ_MSI_BIT0));
+	} else {
+		/*
+		 * These chips have PCIe. Thankfully the ACK doesn't
+		 * need any locking.
+		 */
+		cvmx_write_csr(CVMX_PEXP_NPEI_MSI_RCV0,
+			       1ull << (irq - OCTEON_IRQ_MSI_BIT0));
+	}
+}
+
+static void octeon_irq_msi_eoi(unsigned int irq)
+{
+	/* Nothing needed */
+}
+
+static void octeon_irq_msi_enable(unsigned int irq)
+{
+	if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
+		/*
+		 * Octeon PCI doesn't have the ability to mask/unmask
+		 * MSI interrupts individually.  Instead of
+		 * masking/unmasking them in groups of 16, we simple
+		 * assume MSI devices are well behaved.  MSI
+		 * interrupts are always enable and the ACK is assumed
+		 * to be enough.
+		 */
+	} else {
+		/* These chips have PCIe.  Note that we only support
+		 * the first 64 MSI interrupts.  Unfortunately all the
+		 * MSI enables are in the same register.  We use
+		 * MSI0's lock to control access to them all.
+		 */
+		uint64_t en;
+		unsigned long flags;
+		spin_lock_irqsave(&octeon_irq_msi_lock, flags);
+		en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
+		en |= 1ull << (irq - OCTEON_IRQ_MSI_BIT0);
+		cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
+		cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
+		spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
+	}
+}
+
+static void octeon_irq_msi_disable(unsigned int irq)
+{
+	if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) {
+		/* See comment in enable */
+	} else {
+		/*
+		 * These chips have PCIe.  Note that we only support
+		 * the first 64 MSI interrupts.  Unfortunately all the
+		 * MSI enables are in the same register.  We use
+		 * MSI0's lock to control access to them all.
+		 */
+		uint64_t en;
+		unsigned long flags;
+		spin_lock_irqsave(&octeon_irq_msi_lock, flags);
+		en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
+		en &= ~(1ull << (irq - OCTEON_IRQ_MSI_BIT0));
+		cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en);
+		cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0);
+		spin_unlock_irqrestore(&octeon_irq_msi_lock, flags);
+	}
+}
+
+static struct irq_chip octeon_irq_chip_msi = {
+	.name = "MSI",
+	.enable = octeon_irq_msi_enable,
+	.disable = octeon_irq_msi_disable,
+	.ack = octeon_irq_msi_ack,
+	.eoi = octeon_irq_msi_eoi,
+};
+#endif
+
+void __init arch_init_irq(void)
+{
+	int irq;
+
+#ifdef CONFIG_SMP
+	/* Set the default affinity to the boot cpu. */
+	cpumask_clear(irq_default_affinity);
+	cpumask_set_cpu(smp_processor_id(), irq_default_affinity);
+#endif
+
+	if (NR_IRQS < OCTEON_IRQ_LAST)
+		pr_err("octeon_irq_init: NR_IRQS is set too low\n");
+
+	/* 0 - 15 reserved for i8259 master and slave controller. */
+
+	/* 17 - 23 Mips internal */
+	for (irq = OCTEON_IRQ_SW0; irq <= OCTEON_IRQ_TIMER; irq++) {
+		set_irq_chip_and_handler(irq, &octeon_irq_chip_core,
+					 handle_percpu_irq);
+	}
+
+	/* 24 - 87 CIU_INT_SUM0 */
+	for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) {
+		set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu0,
+					 handle_percpu_irq);
+	}
+
+	/* 88 - 151 CIU_INT_SUM1 */
+	for (irq = OCTEON_IRQ_WDOG0; irq <= OCTEON_IRQ_RESERVED151; irq++) {
+		set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu1,
+					 handle_percpu_irq);
+	}
+
+#ifdef CONFIG_PCI_MSI
+	/* 152 - 215 PCI/PCIe MSI interrupts */
+	for (irq = OCTEON_IRQ_MSI_BIT0; irq <= OCTEON_IRQ_MSI_BIT63; irq++) {
+		set_irq_chip_and_handler(irq, &octeon_irq_chip_msi,
+					 handle_percpu_irq);
+	}
+#endif
+	set_c0_status(0x300 << 2);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	const unsigned long core_id = cvmx_get_core_num();
+	const uint64_t ciu_sum0_address = CVMX_CIU_INTX_SUM0(core_id * 2);
+	const uint64_t ciu_en0_address = CVMX_CIU_INTX_EN0(core_id * 2);
+	const uint64_t ciu_sum1_address = CVMX_CIU_INT_SUM1;
+	const uint64_t ciu_en1_address = CVMX_CIU_INTX_EN1(core_id * 2 + 1);
+	unsigned long cop0_cause;
+	unsigned long cop0_status;
+	uint64_t ciu_en;
+	uint64_t ciu_sum;
+
+	while (1) {
+		cop0_cause = read_c0_cause();
+		cop0_status = read_c0_status();
+		cop0_cause &= cop0_status;
+		cop0_cause &= ST0_IM;
+
+		if (unlikely(cop0_cause & STATUSF_IP2)) {
+			ciu_sum = cvmx_read_csr(ciu_sum0_address);
+			ciu_en = cvmx_read_csr(ciu_en0_address);
+			ciu_sum &= ciu_en;
+			if (likely(ciu_sum))
+				do_IRQ(fls64(ciu_sum) + OCTEON_IRQ_WORKQ0 - 1);
+			else
+				spurious_interrupt();
+		} else if (unlikely(cop0_cause & STATUSF_IP3)) {
+			ciu_sum = cvmx_read_csr(ciu_sum1_address);
+			ciu_en = cvmx_read_csr(ciu_en1_address);
+			ciu_sum &= ciu_en;
+			if (likely(ciu_sum))
+				do_IRQ(fls64(ciu_sum) + OCTEON_IRQ_WDOG0 - 1);
+			else
+				spurious_interrupt();
+		} else if (likely(cop0_cause)) {
+			do_IRQ(fls(cop0_cause) - 9 + MIPS_CPU_IRQ_BASE);
+		} else {
+			break;
+		}
+	}
+}
diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S
new file mode 100644
index 00000000000..88e0cddca20
--- /dev/null
+++ b/arch/mips/cavium-octeon/octeon-memcpy.S
@@ -0,0 +1,521 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Unified implementation of memcpy, memmove and the __copy_user backend.
+ *
+ * Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org)
+ * Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc.
+ * Copyright (C) 2002 Broadcom, Inc.
+ *   memcpy/copy_user author: Mark Vandevoorde
+ *
+ * Mnemonic names for arguments to memcpy/__copy_user
+ */
+
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+
+#define dst a0
+#define src a1
+#define len a2
+
+/*
+ * Spec
+ *
+ * memcpy copies len bytes from src to dst and sets v0 to dst.
+ * It assumes that
+ *   - src and dst don't overlap
+ *   - src is readable
+ *   - dst is writable
+ * memcpy uses the standard calling convention
+ *
+ * __copy_user copies up to len bytes from src to dst and sets a2 (len) to
+ * the number of uncopied bytes due to an exception caused by a read or write.
+ * __copy_user assumes that src and dst don't overlap, and that the call is
+ * implementing one of the following:
+ *   copy_to_user
+ *     - src is readable  (no exceptions when reading src)
+ *   copy_from_user
+ *     - dst is writable  (no exceptions when writing dst)
+ * __copy_user uses a non-standard calling convention; see
+ * arch/mips/include/asm/uaccess.h
+ *
+ * When an exception happens on a load, the handler must
+ # ensure that all of the destination buffer is overwritten to prevent
+ * leaking information to user mode programs.
+ */
+
+/*
+ * Implementation
+ */
+
+/*
+ * The exception handler for loads requires that:
+ *  1- AT contain the address of the byte just past the end of the source
+ *     of the copy,
+ *  2- src_entry <= src < AT, and
+ *  3- (dst - src) == (dst_entry - src_entry),
+ * The _entry suffix denotes values when __copy_user was called.
+ *
+ * (1) is set up up by uaccess.h and maintained by not writing AT in copy_user
+ * (2) is met by incrementing src by the number of bytes copied
+ * (3) is met by not doing loads between a pair of increments of dst and src
+ *
+ * The exception handlers for stores adjust len (if necessary) and return.
+ * These handlers do not need to overwrite any data.
+ *
+ * For __rmemcpy and memmove an exception is always a kernel bug, therefore
+ * they're not protected.
+ */
+
+#define EXC(inst_reg,addr,handler)		\
+9:	inst_reg, addr;				\
+	.section __ex_table,"a";		\
+	PTR	9b, handler;			\
+	.previous
+
+/*
+ * Only on the 64-bit kernel we can made use of 64-bit registers.
+ */
+#ifdef CONFIG_64BIT
+#define USE_DOUBLE
+#endif
+
+#ifdef USE_DOUBLE
+
+#define LOAD   ld
+#define LOADL  ldl
+#define LOADR  ldr
+#define STOREL sdl
+#define STORER sdr
+#define STORE  sd
+#define ADD    daddu
+#define SUB    dsubu
+#define SRL    dsrl
+#define SRA    dsra
+#define SLL    dsll
+#define SLLV   dsllv
+#define SRLV   dsrlv
+#define NBYTES 8
+#define LOG_NBYTES 3
+
+/*
+ * As we are sharing code base with the mips32 tree (which use the o32 ABI
+ * register definitions). We need to redefine the register definitions from
+ * the n64 ABI register naming to the o32 ABI register naming.
+ */
+#undef t0
+#undef t1
+#undef t2
+#undef t3
+#define t0	$8
+#define t1	$9
+#define t2	$10
+#define t3	$11
+#define t4	$12
+#define t5	$13
+#define t6	$14
+#define t7	$15
+
+#else
+
+#define LOAD   lw
+#define LOADL  lwl
+#define LOADR  lwr
+#define STOREL swl
+#define STORER swr
+#define STORE  sw
+#define ADD    addu
+#define SUB    subu
+#define SRL    srl
+#define SLL    sll
+#define SRA    sra
+#define SLLV   sllv
+#define SRLV   srlv
+#define NBYTES 4
+#define LOG_NBYTES 2
+
+#endif /* USE_DOUBLE */
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define LDFIRST LOADR
+#define LDREST  LOADL
+#define STFIRST STORER
+#define STREST  STOREL
+#define SHIFT_DISCARD SLLV
+#else
+#define LDFIRST LOADL
+#define LDREST  LOADR
+#define STFIRST STOREL
+#define STREST  STORER
+#define SHIFT_DISCARD SRLV
+#endif
+
+#define FIRST(unit) ((unit)*NBYTES)
+#define REST(unit)  (FIRST(unit)+NBYTES-1)
+#define UNIT(unit)  FIRST(unit)
+
+#define ADDRMASK (NBYTES-1)
+
+	.text
+	.set	noreorder
+	.set	noat
+
+/*
+ * A combined memcpy/__copy_user
+ * __copy_user sets len to 0 for success; else to an upper bound of
+ * the number of uncopied bytes.
+ * memcpy sets v0 to dst.
+ */
+	.align	5
+LEAF(memcpy)					/* a0=dst a1=src a2=len */
+	move	v0, dst				/* return value */
+__memcpy:
+FEXPORT(__copy_user)
+	/*
+	 * Note: dst & src may be unaligned, len may be 0
+	 * Temps
+	 */
+	#
+	# Octeon doesn't care if the destination is unaligned. The hardware
+	# can fix it faster than we can special case the assembly.
+	#
+	pref	0, 0(src)
+	sltu	t0, len, NBYTES		# Check if < 1 word
+	bnez	t0, copy_bytes_checklen
+	 and	t0, src, ADDRMASK	# Check if src unaligned
+	bnez	t0, src_unaligned
+	 sltu	t0, len, 4*NBYTES	# Check if < 4 words
+	bnez	t0, less_than_4units
+	 sltu	t0, len, 8*NBYTES	# Check if < 8 words
+	bnez	t0, less_than_8units
+	 sltu	t0, len, 16*NBYTES	# Check if < 16 words
+	bnez	t0, cleanup_both_aligned
+	 sltu	t0, len, 128+1		# Check if len < 129
+	bnez	t0, 1f			# Skip prefetch if len is too short
+	 sltu	t0, len, 256+1		# Check if len < 257
+	bnez	t0, 1f			# Skip prefetch if len is too short
+	 pref	0, 128(src)		# We must not prefetch invalid addresses
+	#
+	# This is where we loop if there is more than 128 bytes left
+2:	pref	0, 256(src)		# We must not prefetch invalid addresses
+	#
+	# This is where we loop if we can't prefetch anymore
+1:
+EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+	SUB	len, len, 16*NBYTES
+EXC(	STORE	t0, UNIT(0)(dst),	s_exc_p16u)
+EXC(	STORE	t1, UNIT(1)(dst),	s_exc_p15u)
+EXC(	STORE	t2, UNIT(2)(dst),	s_exc_p14u)
+EXC(	STORE	t3, UNIT(3)(dst),	s_exc_p13u)
+EXC(	LOAD	t0, UNIT(4)(src),	l_exc_copy)
+EXC(	LOAD	t1, UNIT(5)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(6)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(7)(src),	l_exc_copy)
+EXC(	STORE	t0, UNIT(4)(dst),	s_exc_p12u)
+EXC(	STORE	t1, UNIT(5)(dst),	s_exc_p11u)
+EXC(	STORE	t2, UNIT(6)(dst),	s_exc_p10u)
+	ADD	src, src, 16*NBYTES
+EXC(	STORE	t3, UNIT(7)(dst),	s_exc_p9u)
+	ADD	dst, dst, 16*NBYTES
+EXC(	LOAD	t0, UNIT(-8)(src),	l_exc_copy)
+EXC(	LOAD	t1, UNIT(-7)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(-6)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(-5)(src),	l_exc_copy)
+EXC(	STORE	t0, UNIT(-8)(dst),	s_exc_p8u)
+EXC(	STORE	t1, UNIT(-7)(dst),	s_exc_p7u)
+EXC(	STORE	t2, UNIT(-6)(dst),	s_exc_p6u)
+EXC(	STORE	t3, UNIT(-5)(dst),	s_exc_p5u)
+EXC(	LOAD	t0, UNIT(-4)(src),	l_exc_copy)
+EXC(	LOAD	t1, UNIT(-3)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(-2)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(-1)(src),	l_exc_copy)
+EXC(	STORE	t0, UNIT(-4)(dst),	s_exc_p4u)
+EXC(	STORE	t1, UNIT(-3)(dst),	s_exc_p3u)
+EXC(	STORE	t2, UNIT(-2)(dst),	s_exc_p2u)
+EXC(	STORE	t3, UNIT(-1)(dst),	s_exc_p1u)
+	sltu	t0, len, 256+1		# See if we can prefetch more
+	beqz	t0, 2b
+	 sltu	t0, len, 128		# See if we can loop more time
+	beqz	t0, 1b
+	 nop
+	#
+	# Jump here if there are less than 16*NBYTES left.
+	#
+cleanup_both_aligned:
+	beqz	len, done
+	 sltu	t0, len, 8*NBYTES
+	bnez	t0, less_than_8units
+	 nop
+EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+	SUB	len, len, 8*NBYTES
+EXC(	STORE	t0, UNIT(0)(dst),	s_exc_p8u)
+EXC(	STORE	t1, UNIT(1)(dst),	s_exc_p7u)
+EXC(	STORE	t2, UNIT(2)(dst),	s_exc_p6u)
+EXC(	STORE	t3, UNIT(3)(dst),	s_exc_p5u)
+EXC(	LOAD	t0, UNIT(4)(src),	l_exc_copy)
+EXC(	LOAD	t1, UNIT(5)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(6)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(7)(src),	l_exc_copy)
+EXC(	STORE	t0, UNIT(4)(dst),	s_exc_p4u)
+EXC(	STORE	t1, UNIT(5)(dst),	s_exc_p3u)
+EXC(	STORE	t2, UNIT(6)(dst),	s_exc_p2u)
+EXC(	STORE	t3, UNIT(7)(dst),	s_exc_p1u)
+	ADD	src, src, 8*NBYTES
+	beqz	len, done
+	 ADD	dst, dst, 8*NBYTES
+	#
+	# Jump here if there are less than 8*NBYTES left.
+	#
+less_than_8units:
+	sltu	t0, len, 4*NBYTES
+	bnez	t0, less_than_4units
+	 nop
+EXC(	LOAD	t0, UNIT(0)(src),	l_exc)
+EXC(	LOAD	t1, UNIT(1)(src),	l_exc_copy)
+EXC(	LOAD	t2, UNIT(2)(src),	l_exc_copy)
+EXC(	LOAD	t3, UNIT(3)(src),	l_exc_copy)
+	SUB	len, len, 4*NBYTES
+EXC(	STORE	t0, UNIT(0)(dst),	s_exc_p4u)
+EXC(	STORE	t1, UNIT(1)(dst),	s_exc_p3u)
+EXC(	STORE	t2, UNIT(2)(dst),	s_exc_p2u)
+EXC(	STORE	t3, UNIT(3)(dst),	s_exc_p1u)
+	ADD	src, src, 4*NBYTES
+	beqz	len, done
+	 ADD	dst, dst, 4*NBYTES
+	#
+	# Jump here if there are less than 4*NBYTES left. This means
+	# we may need to copy up to 3 NBYTES words.
+	#
+less_than_4units:
+	sltu	t0, len, 1*NBYTES
+	bnez	t0, copy_bytes_checklen
+	 nop
+	#
+	# 1) Copy NBYTES, then check length again
+	#
+EXC(	LOAD	t0, 0(src),		l_exc)
+	SUB	len, len, NBYTES
+	sltu	t1, len, 8
+EXC(	STORE	t0, 0(dst),		s_exc_p1u)
+	ADD	src, src, NBYTES
+	bnez	t1, copy_bytes_checklen
+	 ADD	dst, dst, NBYTES
+	#
+	# 2) Copy NBYTES, then check length again
+	#
+EXC(	LOAD	t0, 0(src),		l_exc)
+	SUB	len, len, NBYTES
+	sltu	t1, len, 8
+EXC(	STORE	t0, 0(dst),		s_exc_p1u)
+	ADD	src, src, NBYTES
+	bnez	t1, copy_bytes_checklen
+	 ADD	dst, dst, NBYTES
+	#
+	# 3) Copy NBYTES, then check length again
+	#
+EXC(	LOAD	t0, 0(src),		l_exc)
+	SUB	len, len, NBYTES
+	ADD	src, src, NBYTES
+	ADD	dst, dst, NBYTES
+	b copy_bytes_checklen
+EXC(	 STORE	t0, -8(dst),		s_exc_p1u)
+
+src_unaligned:
+#define rem t8
+	SRL	t0, len, LOG_NBYTES+2    # +2 for 4 units/iter
+	beqz	t0, cleanup_src_unaligned
+	 and	rem, len, (4*NBYTES-1)   # rem = len % 4*NBYTES
+1:
+/*
+ * Avoid consecutive LD*'s to the same register since some mips
+ * implementations can't issue them in the same cycle.
+ * It's OK to load FIRST(N+1) before REST(N) because the two addresses
+ * are to the same unit (unless src is aligned, but it's not).
+ */
+EXC(	LDFIRST	t0, FIRST(0)(src),	l_exc)
+EXC(	LDFIRST	t1, FIRST(1)(src),	l_exc_copy)
+	SUB     len, len, 4*NBYTES
+EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
+EXC(	LDREST	t1, REST(1)(src),	l_exc_copy)
+EXC(	LDFIRST	t2, FIRST(2)(src),	l_exc_copy)
+EXC(	LDFIRST	t3, FIRST(3)(src),	l_exc_copy)
+EXC(	LDREST	t2, REST(2)(src),	l_exc_copy)
+EXC(	LDREST	t3, REST(3)(src),	l_exc_copy)
+	ADD	src, src, 4*NBYTES
+EXC(	STORE	t0, UNIT(0)(dst),	s_exc_p4u)
+EXC(	STORE	t1, UNIT(1)(dst),	s_exc_p3u)
+EXC(	STORE	t2, UNIT(2)(dst),	s_exc_p2u)
+EXC(	STORE	t3, UNIT(3)(dst),	s_exc_p1u)
+	bne	len, rem, 1b
+	 ADD	dst, dst, 4*NBYTES
+
+cleanup_src_unaligned:
+	beqz	len, done
+	 and	rem, len, NBYTES-1  # rem = len % NBYTES
+	beq	rem, len, copy_bytes
+	 nop
+1:
+EXC(	LDFIRST t0, FIRST(0)(src),	l_exc)
+EXC(	LDREST	t0, REST(0)(src),	l_exc_copy)
+	SUB	len, len, NBYTES
+EXC(	STORE	t0, 0(dst),		s_exc_p1u)
+	ADD	src, src, NBYTES
+	bne	len, rem, 1b
+	 ADD	dst, dst, NBYTES
+
+copy_bytes_checklen:
+	beqz	len, done
+	 nop
+copy_bytes:
+	/* 0 < len < NBYTES  */
+#define COPY_BYTE(N)			\
+EXC(	lb	t0, N(src), l_exc);	\
+	SUB	len, len, 1;		\
+	beqz	len, done;		\
+EXC(	 sb	t0, N(dst), s_exc_p1)
+
+	COPY_BYTE(0)
+	COPY_BYTE(1)
+#ifdef USE_DOUBLE
+	COPY_BYTE(2)
+	COPY_BYTE(3)
+	COPY_BYTE(4)
+	COPY_BYTE(5)
+#endif
+EXC(	lb	t0, NBYTES-2(src), l_exc)
+	SUB	len, len, 1
+	jr	ra
+EXC(	 sb	t0, NBYTES-2(dst), s_exc_p1)
+done:
+	jr	ra
+	 nop
+	END(memcpy)
+
+l_exc_copy:
+	/*
+	 * Copy bytes from src until faulting load address (or until a
+	 * lb faults)
+	 *
+	 * When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
+	 * may be more than a byte beyond the last address.
+	 * Hence, the lb below may get an exception.
+	 *
+	 * Assumes src < THREAD_BUADDR($28)
+	 */
+	LOAD	t0, TI_TASK($28)
+	 nop
+	LOAD	t0, THREAD_BUADDR(t0)
+1:
+EXC(	lb	t1, 0(src),	l_exc)
+	ADD	src, src, 1
+	sb	t1, 0(dst)	# can't fault -- we're copy_from_user
+	bne	src, t0, 1b
+	 ADD	dst, dst, 1
+l_exc:
+	LOAD	t0, TI_TASK($28)
+	 nop
+	LOAD	t0, THREAD_BUADDR(t0)	# t0 is just past last good address
+	 nop
+	SUB	len, AT, t0		# len number of uncopied bytes
+	/*
+	 * Here's where we rely on src and dst being incremented in tandem,
+	 *   See (3) above.
+	 * dst += (fault addr - src) to put dst at first byte to clear
+	 */
+	ADD	dst, t0			# compute start address in a1
+	SUB	dst, src
+	/*
+	 * Clear len bytes starting at dst.  Can't call __bzero because it
+	 * might modify len.  An inefficient loop for these rare times...
+	 */
+	beqz	len, done
+	 SUB	src, len, 1
+1:	sb	zero, 0(dst)
+	ADD	dst, dst, 1
+	bnez	src, 1b
+	 SUB	src, src, 1
+	jr	ra
+	 nop
+
+
+#define SEXC(n)				\
+s_exc_p ## n ## u:			\
+	jr	ra;			\
+	 ADD	len, len, n*NBYTES
+
+SEXC(16)
+SEXC(15)
+SEXC(14)
+SEXC(13)
+SEXC(12)
+SEXC(11)
+SEXC(10)
+SEXC(9)
+SEXC(8)
+SEXC(7)
+SEXC(6)
+SEXC(5)
+SEXC(4)
+SEXC(3)
+SEXC(2)
+SEXC(1)
+
+s_exc_p1:
+	jr	ra
+	 ADD	len, len, 1
+s_exc:
+	jr	ra
+	 nop
+
+	.align	5
+LEAF(memmove)
+	ADD	t0, a0, a2
+	ADD	t1, a1, a2
+	sltu	t0, a1, t0			# dst + len <= src -> memcpy
+	sltu	t1, a0, t1			# dst >= src + len -> memcpy
+	and	t0, t1
+	beqz	t0, __memcpy
+	 move	v0, a0				/* return value */
+	beqz	a2, r_out
+	END(memmove)
+
+	/* fall through to __rmemcpy */
+LEAF(__rmemcpy)					/* a0=dst a1=src a2=len */
+	 sltu	t0, a1, a0
+	beqz	t0, r_end_bytes_up		# src >= dst
+	 nop
+	ADD	a0, a2				# dst = dst + len
+	ADD	a1, a2				# src = src + len
+
+r_end_bytes:
+	lb	t0, -1(a1)
+	SUB	a2, a2, 0x1
+	sb	t0, -1(a0)
+	SUB	a1, a1, 0x1
+	bnez	a2, r_end_bytes
+	 SUB	a0, a0, 0x1
+
+r_out:
+	jr	ra
+	 move	a2, zero
+
+r_end_bytes_up:
+	lb	t0, (a1)
+	SUB	a2, a2, 0x1
+	sb	t0, (a0)
+	ADD	a1, a1, 0x1
+	bnez	a2, r_end_bytes_up
+	 ADD	a0, a0, 0x1
+
+	jr	ra
+	 move	a2, zero
+	END(__rmemcpy)
diff --git a/arch/mips/cavium-octeon/serial.c b/arch/mips/cavium-octeon/serial.c
new file mode 100644
index 00000000000..8240728d485
--- /dev/null
+++ b/arch/mips/cavium-octeon/serial.c
@@ -0,0 +1,136 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2007 Cavium Networks
+ */
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/tty.h>
+
+#include <asm/time.h>
+
+#include <asm/octeon/octeon.h>
+
+#ifdef CONFIG_GDB_CONSOLE
+#define DEBUG_UART 0
+#else
+#define DEBUG_UART 1
+#endif
+
+unsigned int octeon_serial_in(struct uart_port *up, int offset)
+{
+	int rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
+	if (offset == UART_IIR && (rv & 0xf) == 7) {
+		/* Busy interrupt, read the USR (39) and try again. */
+		cvmx_read_csr((uint64_t)(up->membase + (39 << 3)));
+		rv = cvmx_read_csr((uint64_t)(up->membase + (offset << 3)));
+	}
+	return rv;
+}
+
+void octeon_serial_out(struct uart_port *up, int offset, int value)
+{
+	/*
+	 * If bits 6 or 7 of the OCTEON UART's LCR are set, it quits
+	 * working.
+	 */
+	if (offset == UART_LCR)
+		value &= 0x9f;
+	cvmx_write_csr((uint64_t)(up->membase + (offset << 3)), (u8)value);
+}
+
+/*
+ * Allocated in .bss, so it is all zeroed.
+ */
+#define OCTEON_MAX_UARTS 3
+static struct plat_serial8250_port octeon_uart8250_data[OCTEON_MAX_UARTS + 1];
+static struct platform_device octeon_uart8250_device = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev			= {
+		.platform_data	= octeon_uart8250_data,
+	},
+};
+
+static void __init octeon_uart_set_common(struct plat_serial8250_port *p)
+{
+	p->flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ | UPF_FIXED_TYPE;
+	p->type = PORT_OCTEON;
+	p->iotype = UPIO_MEM;
+	p->regshift = 3;	/* I/O addresses are every 8 bytes */
+	p->uartclk = mips_hpt_frequency;
+	p->serial_in = octeon_serial_in;
+	p->serial_out = octeon_serial_out;
+}
+
+static int __init octeon_serial_init(void)
+{
+	int enable_uart0;
+	int enable_uart1;
+	int enable_uart2;
+	struct plat_serial8250_port *p;
+
+#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
+	/*
+	 * If we are configured to run as the second of two kernels,
+	 * disable uart0 and enable uart1. Uart0 is owned by the first
+	 * kernel
+	 */
+	enable_uart0 = 0;
+	enable_uart1 = 1;
+#else
+	/*
+	 * We are configured for the first kernel. We'll enable uart0
+	 * if the bootloader told us to use 0, otherwise will enable
+	 * uart 1.
+	 */
+	enable_uart0 = (octeon_get_boot_uart() == 0);
+	enable_uart1 = (octeon_get_boot_uart() == 1);
+#ifdef CONFIG_KGDB
+	enable_uart1 = 1;
+#endif
+#endif
+
+	/* Right now CN52XX is the only chip with a third uart */
+	enable_uart2 = OCTEON_IS_MODEL(OCTEON_CN52XX);
+
+	p = octeon_uart8250_data;
+	if (enable_uart0) {
+		/* Add a ttyS device for hardware uart 0 */
+		octeon_uart_set_common(p);
+		p->membase = (void *) CVMX_MIO_UARTX_RBR(0);
+		p->mapbase = CVMX_MIO_UARTX_RBR(0) & ((1ull << 49) - 1);
+		p->irq = OCTEON_IRQ_UART0;
+		p++;
+	}
+
+	if (enable_uart1) {
+		/* Add a ttyS device for hardware uart 1 */
+		octeon_uart_set_common(p);
+		p->membase = (void *) CVMX_MIO_UARTX_RBR(1);
+		p->mapbase = CVMX_MIO_UARTX_RBR(1) & ((1ull << 49) - 1);
+		p->irq = OCTEON_IRQ_UART1;
+		p++;
+	}
+	if (enable_uart2) {
+		/* Add a ttyS device for hardware uart 2 */
+		octeon_uart_set_common(p);
+		p->membase = (void *) CVMX_MIO_UART2_RBR;
+		p->mapbase = CVMX_MIO_UART2_RBR & ((1ull << 49) - 1);
+		p->irq = OCTEON_IRQ_UART2;
+		p++;
+	}
+
+	BUG_ON(p > &octeon_uart8250_data[OCTEON_MAX_UARTS]);
+
+	return platform_device_register(&octeon_uart8250_device);
+}
+
+device_initcall(octeon_serial_init);
diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c
new file mode 100644
index 00000000000..e085feddb4a
--- /dev/null
+++ b/arch/mips/cavium-octeon/setup.c
@@ -0,0 +1,929 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2007 Cavium Networks
+ * Copyright (C) 2008 Wind River Systems
+ */
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/serial.h>
+#include <linux/types.h>
+#include <linux/string.h>	/* for memset */
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/time.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+#include <linux/string.h>
+
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/smp-ops.h>
+#include <asm/system.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/bootinfo.h>
+#include <asm/sections.h>
+#include <asm/time.h>
+
+#include <asm/octeon/octeon.h>
+
+#ifdef CONFIG_CAVIUM_DECODE_RSL
+extern void cvmx_interrupt_rsl_decode(void);
+extern int __cvmx_interrupt_ecc_report_single_bit_errors;
+extern void cvmx_interrupt_rsl_enable(void);
+#endif
+
+extern struct plat_smp_ops octeon_smp_ops;
+
+#ifdef CONFIG_PCI
+extern void pci_console_init(const char *arg);
+#endif
+
+#ifdef CONFIG_CAVIUM_RESERVE32
+extern uint64_t octeon_reserve32_memory;
+#endif
+static unsigned long long MAX_MEMORY = 512ull << 20;
+
+struct octeon_boot_descriptor *octeon_boot_desc_ptr;
+
+struct cvmx_bootinfo *octeon_bootinfo;
+EXPORT_SYMBOL(octeon_bootinfo);
+
+#ifdef CONFIG_CAVIUM_RESERVE32
+uint64_t octeon_reserve32_memory;
+EXPORT_SYMBOL(octeon_reserve32_memory);
+#endif
+
+static int octeon_uart;
+
+extern asmlinkage void handle_int(void);
+extern asmlinkage void plat_irq_dispatch(void);
+
+/**
+ * Return non zero if we are currently running in the Octeon simulator
+ *
+ * Returns
+ */
+int octeon_is_simulation(void)
+{
+	return octeon_bootinfo->board_type == CVMX_BOARD_TYPE_SIM;
+}
+EXPORT_SYMBOL(octeon_is_simulation);
+
+/**
+ * Return true if Octeon is in PCI Host mode. This means
+ * Linux can control the PCI bus.
+ *
+ * Returns Non zero if Octeon in host mode.
+ */
+int octeon_is_pci_host(void)
+{
+#ifdef CONFIG_PCI
+	return octeon_bootinfo->config_flags & CVMX_BOOTINFO_CFG_FLAG_PCI_HOST;
+#else
+	return 0;
+#endif
+}
+
+/**
+ * Get the clock rate of Octeon
+ *
+ * Returns Clock rate in HZ
+ */
+uint64_t octeon_get_clock_rate(void)
+{
+	if (octeon_is_simulation())
+		octeon_bootinfo->eclock_hz = 6000000;
+	return octeon_bootinfo->eclock_hz;
+}
+EXPORT_SYMBOL(octeon_get_clock_rate);
+
+/**
+ * Write to the LCD display connected to the bootbus. This display
+ * exists on most Cavium evaluation boards. If it doesn't exist, then
+ * this function doesn't do anything.
+ *
+ * @s:      String to write
+ */
+void octeon_write_lcd(const char *s)
+{
+	if (octeon_bootinfo->led_display_base_addr) {
+		void __iomem *lcd_address =
+			ioremap_nocache(octeon_bootinfo->led_display_base_addr,
+					8);
+		int i;
+		for (i = 0; i < 8; i++, s++) {
+			if (*s)
+				iowrite8(*s, lcd_address + i);
+			else
+				iowrite8(' ', lcd_address + i);
+		}
+		iounmap(lcd_address);
+	}
+}
+
+/**
+ * Return the console uart passed by the bootloader
+ *
+ * Returns uart   (0 or 1)
+ */
+int octeon_get_boot_uart(void)
+{
+	int uart;
+#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
+	uart = 1;
+#else
+	uart = (octeon_boot_desc_ptr->flags & OCTEON_BL_FLAG_CONSOLE_UART1) ?
+		1 : 0;
+#endif
+	return uart;
+}
+
+/**
+ * Get the coremask Linux was booted on.
+ *
+ * Returns Core mask
+ */
+int octeon_get_boot_coremask(void)
+{
+	return octeon_boot_desc_ptr->core_mask;
+}
+
+/**
+ * Check the hardware BIST results for a CPU
+ */
+void octeon_check_cpu_bist(void)
+{
+	const int coreid = cvmx_get_core_num();
+	unsigned long long mask;
+	unsigned long long bist_val;
+
+	/* Check BIST results for COP0 registers */
+	mask = 0x1f00000000ull;
+	bist_val = read_octeon_c0_icacheerr();
+	if (bist_val & mask)
+		pr_err("Core%d BIST Failure: CacheErr(icache) = 0x%llx\n",
+		       coreid, bist_val);
+
+	bist_val = read_octeon_c0_dcacheerr();
+	if (bist_val & 1)
+		pr_err("Core%d L1 Dcache parity error: "
+		       "CacheErr(dcache) = 0x%llx\n",
+		       coreid, bist_val);
+
+	mask = 0xfc00000000000000ull;
+	bist_val = read_c0_cvmmemctl();
+	if (bist_val & mask)
+		pr_err("Core%d BIST Failure: COP0_CVM_MEM_CTL = 0x%llx\n",
+		       coreid, bist_val);
+
+	write_octeon_c0_dcacheerr(0);
+}
+
+#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
+/**
+ * Called on every core to setup the wired tlb entry needed
+ * if CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB is set.
+ *
+ */
+static void octeon_hal_setup_per_cpu_reserved32(void *unused)
+{
+	/*
+	 * The config has selected to wire the reserve32 memory for all
+	 * userspace applications. We need to put a wired TLB entry in for each
+	 * 512MB of reserve32 memory. We only handle double 256MB pages here,
+	 * so reserve32 must be multiple of 512MB.
+	 */
+	uint32_t size = CONFIG_CAVIUM_RESERVE32;
+	uint32_t entrylo0 =
+		0x7 | ((octeon_reserve32_memory & ((1ul << 40) - 1)) >> 6);
+	uint32_t entrylo1 = entrylo0 + (256 << 14);
+	uint32_t entryhi = (0x80000000UL - (CONFIG_CAVIUM_RESERVE32 << 20));
+	while (size >= 512) {
+#if 0
+		pr_info("CPU%d: Adding double wired TLB entry for 0x%lx\n",
+			smp_processor_id(), entryhi);
+#endif
+		add_wired_entry(entrylo0, entrylo1, entryhi, PM_256M);
+		entrylo0 += 512 << 14;
+		entrylo1 += 512 << 14;
+		entryhi += 512 << 20;
+		size -= 512;
+	}
+}
+#endif /* CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB */
+
+/**
+ * Called to release the named block which was used to made sure
+ * that nobody used the memory for something else during
+ * init. Now we'll free it so userspace apps can use this
+ * memory region with bootmem_alloc.
+ *
+ * This function is called only once from prom_free_prom_memory().
+ */
+void octeon_hal_setup_reserved32(void)
+{
+#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
+	on_each_cpu(octeon_hal_setup_per_cpu_reserved32, NULL, 0, 1);
+#endif
+}
+
+/**
+ * Reboot Octeon
+ *
+ * @command: Command to pass to the bootloader. Currently ignored.
+ */
+static void octeon_restart(char *command)
+{
+	/* Disable all watchdogs before soft reset. They don't get cleared */
+#ifdef CONFIG_SMP
+	int cpu;
+	for_each_online_cpu(cpu)
+		cvmx_write_csr(CVMX_CIU_WDOGX(cpu_logical_map(cpu)), 0);
+#else
+	cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
+#endif
+
+	mb();
+	while (1)
+		cvmx_write_csr(CVMX_CIU_SOFT_RST, 1);
+}
+
+
+/**
+ * Permanently stop a core.
+ *
+ * @arg: Ignored.
+ */
+static void octeon_kill_core(void *arg)
+{
+	mb();
+	if (octeon_is_simulation()) {
+		/* The simulator needs the watchdog to stop for dead cores */
+		cvmx_write_csr(CVMX_CIU_WDOGX(cvmx_get_core_num()), 0);
+		/* A break instruction causes the simulator stop a core */
+		asm volatile ("sync\nbreak");
+	}
+}
+
+
+/**
+ * Halt the system
+ */
+static void octeon_halt(void)
+{
+	smp_call_function(octeon_kill_core, NULL, 0);
+
+	switch (octeon_bootinfo->board_type) {
+	case CVMX_BOARD_TYPE_NAO38:
+		/* Driving a 1 to GPIO 12 shuts off this board */
+		cvmx_write_csr(CVMX_GPIO_BIT_CFGX(12), 1);
+		cvmx_write_csr(CVMX_GPIO_TX_SET, 0x1000);
+		break;
+	default:
+		octeon_write_lcd("PowerOff");
+		break;
+	}
+
+	octeon_kill_core(NULL);
+}
+
+#if 0
+/**
+ * Platform time init specifics.
+ * Returns
+ */
+void __init plat_time_init(void)
+{
+	/* Nothing special here, but we are required to have one */
+}
+
+#endif
+
+/**
+ * Handle all the error condition interrupts that might occur.
+ *
+ */
+#ifdef CONFIG_CAVIUM_DECODE_RSL
+static irqreturn_t octeon_rlm_interrupt(int cpl, void *dev_id)
+{
+	cvmx_interrupt_rsl_decode();
+	return IRQ_HANDLED;
+}
+#endif
+
+/**
+ * Return a string representing the system type
+ *
+ * Returns
+ */
+const char *octeon_board_type_string(void)
+{
+	static char name[80];
+	sprintf(name, "%s (%s)",
+		cvmx_board_type_to_string(octeon_bootinfo->board_type),
+		octeon_model_get_string(read_c0_prid()));
+	return name;
+}
+
+const char *get_system_type(void)
+	__attribute__ ((alias("octeon_board_type_string")));
+
+void octeon_user_io_init(void)
+{
+	union octeon_cvmemctl cvmmemctl;
+	union cvmx_iob_fau_timeout fau_timeout;
+	union cvmx_pow_nw_tim nm_tim;
+	uint64_t cvmctl;
+
+	/* Get the current settings for CP0_CVMMEMCTL_REG */
+	cvmmemctl.u64 = read_c0_cvmmemctl();
+	/* R/W If set, marked write-buffer entries time out the same
+	 * as as other entries; if clear, marked write-buffer entries
+	 * use the maximum timeout. */
+	cvmmemctl.s.dismarkwblongto = 1;
+	/* R/W If set, a merged store does not clear the write-buffer
+	 * entry timeout state. */
+	cvmmemctl.s.dismrgclrwbto = 0;
+	/* R/W Two bits that are the MSBs of the resultant CVMSEG LM
+	 * word location for an IOBDMA. The other 8 bits come from the
+	 * SCRADDR field of the IOBDMA. */
+	cvmmemctl.s.iobdmascrmsb = 0;
+	/* R/W If set, SYNCWS and SYNCS only order marked stores; if
+	 * clear, SYNCWS and SYNCS only order unmarked
+	 * stores. SYNCWSMARKED has no effect when DISSYNCWS is
+	 * set. */
+	cvmmemctl.s.syncwsmarked = 0;
+	/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as SYNC. */
+	cvmmemctl.s.dissyncws = 0;
+	/* R/W If set, no stall happens on write buffer full. */
+	if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2))
+		cvmmemctl.s.diswbfst = 1;
+	else
+		cvmmemctl.s.diswbfst = 0;
+	/* R/W If set (and SX set), supervisor-level loads/stores can
+	 * use XKPHYS addresses with <48>==0 */
+	cvmmemctl.s.xkmemenas = 0;
+
+	/* R/W If set (and UX set), user-level loads/stores can use
+	 * XKPHYS addresses with VA<48>==0 */
+	cvmmemctl.s.xkmemenau = 0;
+
+	/* R/W If set (and SX set), supervisor-level loads/stores can
+	 * use XKPHYS addresses with VA<48>==1 */
+	cvmmemctl.s.xkioenas = 0;
+
+	/* R/W If set (and UX set), user-level loads/stores can use
+	 * XKPHYS addresses with VA<48>==1 */
+	cvmmemctl.s.xkioenau = 0;
+
+	/* R/W If set, all stores act as SYNCW (NOMERGE must be set
+	 * when this is set) RW, reset to 0. */
+	cvmmemctl.s.allsyncw = 0;
+
+	/* R/W If set, no stores merge, and all stores reach the
+	 * coherent bus in order. */
+	cvmmemctl.s.nomerge = 0;
+	/* R/W Selects the bit in the counter used for DID time-outs 0
+	 * = 231, 1 = 230, 2 = 229, 3 = 214. Actual time-out is
+	 * between 1x and 2x this interval. For example, with
+	 * DIDTTO=3, expiration interval is between 16K and 32K. */
+	cvmmemctl.s.didtto = 0;
+	/* R/W If set, the (mem) CSR clock never turns off. */
+	cvmmemctl.s.csrckalwys = 0;
+	/* R/W If set, mclk never turns off. */
+	cvmmemctl.s.mclkalwys = 0;
+	/* R/W Selects the bit in the counter used for write buffer
+	 * flush time-outs (WBFLT+11) is the bit position in an
+	 * internal counter used to determine expiration. The write
+	 * buffer expires between 1x and 2x this interval. For
+	 * example, with WBFLT = 0, a write buffer expires between 2K
+	 * and 4K cycles after the write buffer entry is allocated. */
+	cvmmemctl.s.wbfltime = 0;
+	/* R/W If set, do not put Istream in the L2 cache. */
+	cvmmemctl.s.istrnol2 = 0;
+	/* R/W The write buffer threshold. */
+	cvmmemctl.s.wbthresh = 10;
+	/* R/W If set, CVMSEG is available for loads/stores in
+	 * kernel/debug mode. */
+#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
+	cvmmemctl.s.cvmsegenak = 1;
+#else
+	cvmmemctl.s.cvmsegenak = 0;
+#endif
+	/* R/W If set, CVMSEG is available for loads/stores in
+	 * supervisor mode. */
+	cvmmemctl.s.cvmsegenas = 0;
+	/* R/W If set, CVMSEG is available for loads/stores in user
+	 * mode. */
+	cvmmemctl.s.cvmsegenau = 0;
+	/* R/W Size of local memory in cache blocks, 54 (6912 bytes)
+	 * is max legal value. */
+	cvmmemctl.s.lmemsz = CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE;
+
+
+	if (smp_processor_id() == 0)
+		pr_notice("CVMSEG size: %d cache lines (%d bytes)\n",
+			  CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE,
+			  CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE * 128);
+
+	write_c0_cvmmemctl(cvmmemctl.u64);
+
+	/* Move the performance counter interrupts to IRQ 6 */
+	cvmctl = read_c0_cvmctl();
+	cvmctl &= ~(7 << 7);
+	cvmctl |= 6 << 7;
+	write_c0_cvmctl(cvmctl);
+
+	/* Set a default for the hardware timeouts */
+	fau_timeout.u64 = 0;
+	fau_timeout.s.tout_val = 0xfff;
+	/* Disable tagwait FAU timeout */
+	fau_timeout.s.tout_enb = 0;
+	cvmx_write_csr(CVMX_IOB_FAU_TIMEOUT, fau_timeout.u64);
+
+	nm_tim.u64 = 0;
+	/* 4096 cycles */
+	nm_tim.s.nw_tim = 3;
+	cvmx_write_csr(CVMX_POW_NW_TIM, nm_tim.u64);
+
+	write_octeon_c0_icacheerr(0);
+	write_c0_derraddr1(0);
+}
+
+/**
+ * Early entry point for arch setup
+ */
+void __init prom_init(void)
+{
+	struct cvmx_sysinfo *sysinfo;
+	const int coreid = cvmx_get_core_num();
+	int i;
+	int argc;
+	struct uart_port octeon_port;
+#ifdef CONFIG_CAVIUM_RESERVE32
+	int64_t addr = -1;
+#endif
+	/*
+	 * The bootloader passes a pointer to the boot descriptor in
+	 * $a3, this is available as fw_arg3.
+	 */
+	octeon_boot_desc_ptr = (struct octeon_boot_descriptor *)fw_arg3;
+	octeon_bootinfo =
+		cvmx_phys_to_ptr(octeon_boot_desc_ptr->cvmx_desc_vaddr);
+	cvmx_bootmem_init(cvmx_phys_to_ptr(octeon_bootinfo->phy_mem_desc_addr));
+
+	/*
+	 * Only enable the LED controller if we're running on a CN38XX, CN58XX,
+	 * or CN56XX. The CN30XX and CN31XX don't have an LED controller.
+	 */
+	if (!octeon_is_simulation() &&
+	    octeon_has_feature(OCTEON_FEATURE_LED_CONTROLLER)) {
+		cvmx_write_csr(CVMX_LED_EN, 0);
+		cvmx_write_csr(CVMX_LED_PRT, 0);
+		cvmx_write_csr(CVMX_LED_DBG, 0);
+		cvmx_write_csr(CVMX_LED_PRT_FMT, 0);
+		cvmx_write_csr(CVMX_LED_UDD_CNTX(0), 32);
+		cvmx_write_csr(CVMX_LED_UDD_CNTX(1), 32);
+		cvmx_write_csr(CVMX_LED_UDD_DATX(0), 0);
+		cvmx_write_csr(CVMX_LED_UDD_DATX(1), 0);
+		cvmx_write_csr(CVMX_LED_EN, 1);
+	}
+#ifdef CONFIG_CAVIUM_RESERVE32
+	/*
+	 * We need to temporarily allocate all memory in the reserve32
+	 * region. This makes sure the kernel doesn't allocate this
+	 * memory when it is getting memory from the
+	 * bootloader. Later, after the memory allocations are
+	 * complete, the reserve32 will be freed.
+	 */
+#ifdef CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
+	if (CONFIG_CAVIUM_RESERVE32 & 0x1ff)
+		pr_err("CAVIUM_RESERVE32 isn't a multiple of 512MB. "
+		       "This is required if CAVIUM_RESERVE32_USE_WIRED_TLB "
+		       "is set\n");
+	else
+		addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
+							0, 0, 512 << 20,
+							"CAVIUM_RESERVE32", 0);
+#else
+	/*
+	 * Allocate memory for RESERVED32 aligned on 2MB boundary. This
+	 * is in case we later use hugetlb entries with it.
+	 */
+	addr = cvmx_bootmem_phy_named_block_alloc(CONFIG_CAVIUM_RESERVE32 << 20,
+						0, 0, 2 << 20,
+						"CAVIUM_RESERVE32", 0);
+#endif
+	if (addr < 0)
+		pr_err("Failed to allocate CAVIUM_RESERVE32 memory area\n");
+	else
+		octeon_reserve32_memory = addr;
+#endif
+
+#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2
+	if (cvmx_read_csr(CVMX_L2D_FUS3) & (3ull << 34)) {
+		pr_info("Skipping L2 locking due to reduced L2 cache size\n");
+	} else {
+		uint32_t ebase = read_c0_ebase() & 0x3ffff000;
+#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB
+		/* TLB refill */
+		cvmx_l2c_lock_mem_region(ebase, 0x100);
+#endif
+#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION
+		/* General exception */
+		cvmx_l2c_lock_mem_region(ebase + 0x180, 0x80);
+#endif
+#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT
+		/* Interrupt handler */
+		cvmx_l2c_lock_mem_region(ebase + 0x200, 0x80);
+#endif
+#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT
+		cvmx_l2c_lock_mem_region(__pa_symbol(handle_int), 0x100);
+		cvmx_l2c_lock_mem_region(__pa_symbol(plat_irq_dispatch), 0x80);
+#endif
+#ifdef CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY
+		cvmx_l2c_lock_mem_region(__pa_symbol(memcpy), 0x480);
+#endif
+	}
+#endif
+
+	sysinfo = cvmx_sysinfo_get();
+	memset(sysinfo, 0, sizeof(*sysinfo));
+	sysinfo->system_dram_size = octeon_bootinfo->dram_size << 20;
+	sysinfo->phy_mem_desc_ptr =
+		cvmx_phys_to_ptr(octeon_bootinfo->phy_mem_desc_addr);
+	sysinfo->core_mask = octeon_bootinfo->core_mask;
+	sysinfo->exception_base_addr = octeon_bootinfo->exception_base_addr;
+	sysinfo->cpu_clock_hz = octeon_bootinfo->eclock_hz;
+	sysinfo->dram_data_rate_hz = octeon_bootinfo->dclock_hz * 2;
+	sysinfo->board_type = octeon_bootinfo->board_type;
+	sysinfo->board_rev_major = octeon_bootinfo->board_rev_major;
+	sysinfo->board_rev_minor = octeon_bootinfo->board_rev_minor;
+	memcpy(sysinfo->mac_addr_base, octeon_bootinfo->mac_addr_base,
+	       sizeof(sysinfo->mac_addr_base));
+	sysinfo->mac_addr_count = octeon_bootinfo->mac_addr_count;
+	memcpy(sysinfo->board_serial_number,
+	       octeon_bootinfo->board_serial_number,
+	       sizeof(sysinfo->board_serial_number));
+	sysinfo->compact_flash_common_base_addr =
+		octeon_bootinfo->compact_flash_common_base_addr;
+	sysinfo->compact_flash_attribute_base_addr =
+		octeon_bootinfo->compact_flash_attribute_base_addr;
+	sysinfo->led_display_base_addr = octeon_bootinfo->led_display_base_addr;
+	sysinfo->dfa_ref_clock_hz = octeon_bootinfo->dfa_ref_clock_hz;
+	sysinfo->bootloader_config_flags = octeon_bootinfo->config_flags;
+
+
+	octeon_check_cpu_bist();
+
+	octeon_uart = octeon_get_boot_uart();
+
+	/*
+	 * Disable All CIU Interrupts. The ones we need will be
+	 * enabled later.  Read the SUM register so we know the write
+	 * completed.
+	 */
+	cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2)), 0);
+	cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2 + 1)), 0);
+	cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2)), 0);
+	cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2 + 1)), 0);
+	cvmx_read_csr(CVMX_CIU_INTX_SUM0((coreid * 2)));
+
+#ifdef CONFIG_SMP
+	octeon_write_lcd("LinuxSMP");
+#else
+	octeon_write_lcd("Linux");
+#endif
+
+#ifdef CONFIG_CAVIUM_GDB
+	/*
+	 * When debugging the linux kernel, force the cores to enter
+	 * the debug exception handler to break in.
+	 */
+	if (octeon_get_boot_debug_flag()) {
+		cvmx_write_csr(CVMX_CIU_DINT, 1 << cvmx_get_core_num());
+		cvmx_read_csr(CVMX_CIU_DINT);
+	}
+#endif
+
+	/*
+	 * BIST should always be enabled when doing a soft reset. L2
+	 * Cache locking for instance is not cleared unless BIST is
+	 * enabled.  Unfortunately due to a chip errata G-200 for
+	 * Cn38XX and CN31XX, BIST msut be disabled on these parts.
+	 */
+	if (OCTEON_IS_MODEL(OCTEON_CN38XX_PASS2) ||
+	    OCTEON_IS_MODEL(OCTEON_CN31XX))
+		cvmx_write_csr(CVMX_CIU_SOFT_BIST, 0);
+	else
+		cvmx_write_csr(CVMX_CIU_SOFT_BIST, 1);
+
+	/* Default to 64MB in the simulator to speed things up */
+	if (octeon_is_simulation())
+		MAX_MEMORY = 64ull << 20;
+
+	arcs_cmdline[0] = 0;
+	argc = octeon_boot_desc_ptr->argc;
+	for (i = 0; i < argc; i++) {
+		const char *arg =
+			cvmx_phys_to_ptr(octeon_boot_desc_ptr->argv[i]);
+		if ((strncmp(arg, "MEM=", 4) == 0) ||
+		    (strncmp(arg, "mem=", 4) == 0)) {
+			sscanf(arg + 4, "%llu", &MAX_MEMORY);
+			MAX_MEMORY <<= 20;
+			if (MAX_MEMORY == 0)
+				MAX_MEMORY = 32ull << 30;
+		} else if (strcmp(arg, "ecc_verbose") == 0) {
+#ifdef CONFIG_CAVIUM_REPORT_SINGLE_BIT_ECC
+			__cvmx_interrupt_ecc_report_single_bit_errors = 1;
+			pr_notice("Reporting of single bit ECC errors is "
+				  "turned on\n");
+#endif
+		} else if (strlen(arcs_cmdline) + strlen(arg) + 1 <
+			   sizeof(arcs_cmdline) - 1) {
+			strcat(arcs_cmdline, " ");
+			strcat(arcs_cmdline, arg);
+		}
+	}
+
+	if (strstr(arcs_cmdline, "console=") == NULL) {
+#ifdef CONFIG_GDB_CONSOLE
+		strcat(arcs_cmdline, " console=gdb");
+#else
+#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
+		strcat(arcs_cmdline, " console=ttyS0,115200");
+#else
+		if (octeon_uart == 1)
+			strcat(arcs_cmdline, " console=ttyS1,115200");
+		else
+			strcat(arcs_cmdline, " console=ttyS0,115200");
+#endif
+#endif
+	}
+
+	if (octeon_is_simulation()) {
+		/*
+		 * The simulator uses a mtdram device pre filled with
+		 * the filesystem. Also specify the calibration delay
+		 * to avoid calculating it every time.
+		 */
+		strcat(arcs_cmdline, " rw root=1f00"
+		       " lpj=60176 slram=root,0x40000000,+1073741824");
+	}
+
+	mips_hpt_frequency = octeon_get_clock_rate();
+
+	octeon_init_cvmcount();
+
+	_machine_restart = octeon_restart;
+	_machine_halt = octeon_halt;
+
+	memset(&octeon_port, 0, sizeof(octeon_port));
+	/*
+	 * For early_serial_setup we don't set the port type or
+	 * UPF_FIXED_TYPE.
+	 */
+	octeon_port.flags = ASYNC_SKIP_TEST | UPF_SHARE_IRQ;
+	octeon_port.iotype = UPIO_MEM;
+	/* I/O addresses are every 8 bytes */
+	octeon_port.regshift = 3;
+	/* Clock rate of the chip */
+	octeon_port.uartclk = mips_hpt_frequency;
+	octeon_port.fifosize = 64;
+	octeon_port.mapbase = 0x0001180000000800ull + (1024 * octeon_uart);
+	octeon_port.membase = cvmx_phys_to_ptr(octeon_port.mapbase);
+	octeon_port.serial_in = octeon_serial_in;
+	octeon_port.serial_out = octeon_serial_out;
+#ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
+	octeon_port.line = 0;
+#else
+	octeon_port.line = octeon_uart;
+#endif
+	octeon_port.irq = 42 + octeon_uart;
+	early_serial_setup(&octeon_port);
+
+	octeon_user_io_init();
+	register_smp_ops(&octeon_smp_ops);
+}
+
+void __init plat_mem_setup(void)
+{
+	uint64_t mem_alloc_size;
+	uint64_t total;
+	int64_t memory;
+
+	total = 0;
+
+	/* First add the init memory we will be returning.  */
+	memory = __pa_symbol(&__init_begin) & PAGE_MASK;
+	mem_alloc_size = (__pa_symbol(&__init_end) & PAGE_MASK) - memory;
+	if (mem_alloc_size > 0) {
+		add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM);
+		total += mem_alloc_size;
+	}
+
+	/*
+	 * The Mips memory init uses the first memory location for
+	 * some memory vectors. When SPARSEMEM is in use, it doesn't
+	 * verify that the size is big enough for the final
+	 * vectors. Making the smallest chuck 4MB seems to be enough
+	 * to consistantly work.
+	 */
+	mem_alloc_size = 4 << 20;
+	if (mem_alloc_size > MAX_MEMORY)
+		mem_alloc_size = MAX_MEMORY;
+
+	/*
+	 * When allocating memory, we want incrementing addresses from
+	 * bootmem_alloc so the code in add_memory_region can merge
+	 * regions next to each other.
+	 */
+	cvmx_bootmem_lock();
+	while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX)
+		&& (total < MAX_MEMORY)) {
+#if defined(CONFIG_64BIT) || defined(CONFIG_64BIT_PHYS_ADDR)
+		memory = cvmx_bootmem_phy_alloc(mem_alloc_size,
+						__pa_symbol(&__init_end), -1,
+						0x100000,
+						CVMX_BOOTMEM_FLAG_NO_LOCKING);
+#elif defined(CONFIG_HIGHMEM)
+		memory = cvmx_bootmem_phy_alloc(mem_alloc_size, 0, 1ull << 31,
+						0x100000,
+						CVMX_BOOTMEM_FLAG_NO_LOCKING);
+#else
+		memory = cvmx_bootmem_phy_alloc(mem_alloc_size, 0, 512 << 20,
+						0x100000,
+						CVMX_BOOTMEM_FLAG_NO_LOCKING);
+#endif
+		if (memory >= 0) {
+			/*
+			 * This function automatically merges address
+			 * regions next to each other if they are
+			 * received in incrementing order.
+			 */
+			add_memory_region(memory, mem_alloc_size, BOOT_MEM_RAM);
+			total += mem_alloc_size;
+		} else {
+			break;
+		}
+	}
+	cvmx_bootmem_unlock();
+
+#ifdef CONFIG_CAVIUM_RESERVE32
+	/*
+	 * Now that we've allocated the kernel memory it is safe to
+	 * free the reserved region. We free it here so that builtin
+	 * drivers can use the memory.
+	 */
+	if (octeon_reserve32_memory)
+		cvmx_bootmem_free_named("CAVIUM_RESERVE32");
+#endif /* CONFIG_CAVIUM_RESERVE32 */
+
+	if (total == 0)
+		panic("Unable to allocate memory from "
+		      "cvmx_bootmem_phy_alloc\n");
+}
+
+
+int prom_putchar(char c)
+{
+	uint64_t lsrval;
+
+	/* Spin until there is room */
+	do {
+		lsrval = cvmx_read_csr(CVMX_MIO_UARTX_LSR(octeon_uart));
+	} while ((lsrval & 0x20) == 0);
+
+	/* Write the byte */
+	cvmx_write_csr(CVMX_MIO_UARTX_THR(octeon_uart), c);
+	return 1;
+}
+
+void prom_free_prom_memory(void)
+{
+#ifdef CONFIG_CAVIUM_DECODE_RSL
+	cvmx_interrupt_rsl_enable();
+
+	/* Add an interrupt handler for general failures. */
+	if (request_irq(OCTEON_IRQ_RML, octeon_rlm_interrupt, IRQF_SHARED,
+			"RML/RSL", octeon_rlm_interrupt)) {
+		panic("Unable to request_irq(OCTEON_IRQ_RML)\n");
+	}
+#endif
+
+	/* This call is here so that it is performed after any TLB
+	   initializations. It needs to be after these in case the
+	   CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB option is set */
+	octeon_hal_setup_reserved32();
+}
+
+static struct octeon_cf_data octeon_cf_data;
+
+static int __init octeon_cf_device_init(void)
+{
+	union cvmx_mio_boot_reg_cfgx mio_boot_reg_cfg;
+	unsigned long base_ptr, region_base, region_size;
+	struct platform_device *pd;
+	struct resource cf_resources[3];
+	unsigned int num_resources;
+	int i;
+	int ret = 0;
+
+	/* Setup octeon-cf platform device if present. */
+	base_ptr = 0;
+	if (octeon_bootinfo->major_version == 1
+		&& octeon_bootinfo->minor_version >= 1) {
+		if (octeon_bootinfo->compact_flash_common_base_addr)
+			base_ptr =
+				octeon_bootinfo->compact_flash_common_base_addr;
+	} else {
+		base_ptr = 0x1d000800;
+	}
+
+	if (!base_ptr)
+		return ret;
+
+	/* Find CS0 region. */
+	for (i = 0; i < 8; i++) {
+		mio_boot_reg_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i));
+		region_base = mio_boot_reg_cfg.s.base << 16;
+		region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
+		if (mio_boot_reg_cfg.s.en && base_ptr >= region_base
+		    && base_ptr < region_base + region_size)
+			break;
+	}
+	if (i >= 7) {
+		/* i and i + 1 are CS0 and CS1, both must be less than 8. */
+		goto out;
+	}
+	octeon_cf_data.base_region = i;
+	octeon_cf_data.is16bit = mio_boot_reg_cfg.s.width;
+	octeon_cf_data.base_region_bias = base_ptr - region_base;
+	memset(cf_resources, 0, sizeof(cf_resources));
+	num_resources = 0;
+	cf_resources[num_resources].flags	= IORESOURCE_MEM;
+	cf_resources[num_resources].start	= region_base;
+	cf_resources[num_resources].end	= region_base + region_size - 1;
+	num_resources++;
+
+
+	if (!(base_ptr & 0xfffful)) {
+		/*
+		 * Boot loader signals availability of DMA (true_ide
+		 * mode) by setting low order bits of base_ptr to
+		 * zero.
+		 */
+
+		/* Asume that CS1 immediately follows. */
+		mio_boot_reg_cfg.u64 =
+			cvmx_read_csr(CVMX_MIO_BOOT_REG_CFGX(i + 1));
+		region_base = mio_boot_reg_cfg.s.base << 16;
+		region_size = (mio_boot_reg_cfg.s.size + 1) << 16;
+		if (!mio_boot_reg_cfg.s.en)
+			goto out;
+
+		cf_resources[num_resources].flags	= IORESOURCE_MEM;
+		cf_resources[num_resources].start	= region_base;
+		cf_resources[num_resources].end	= region_base + region_size - 1;
+		num_resources++;
+
+		octeon_cf_data.dma_engine = 0;
+		cf_resources[num_resources].flags	= IORESOURCE_IRQ;
+		cf_resources[num_resources].start	= OCTEON_IRQ_BOOTDMA;
+		cf_resources[num_resources].end	= OCTEON_IRQ_BOOTDMA;
+		num_resources++;
+	} else {
+		octeon_cf_data.dma_engine = -1;
+	}
+
+	pd = platform_device_alloc("pata_octeon_cf", -1);
+	if (!pd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	pd->dev.platform_data = &octeon_cf_data;
+
+	ret = platform_device_add_resources(pd, cf_resources, num_resources);
+	if (ret)
+		goto fail;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		goto fail;
+
+	return ret;
+fail:
+	platform_device_put(pd);
+out:
+	return ret;
+}
+device_initcall(octeon_cf_device_init);
diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c
new file mode 100644
index 00000000000..24e0ad63980
--- /dev/null
+++ b/arch/mips/cavium-octeon/smp.c
@@ -0,0 +1,211 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2008 Cavium Networks
+ */
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/module.h>
+
+#include <asm/mmu_context.h>
+#include <asm/system.h>
+#include <asm/time.h>
+
+#include <asm/octeon/octeon.h>
+
+volatile unsigned long octeon_processor_boot = 0xff;
+volatile unsigned long octeon_processor_sp;
+volatile unsigned long octeon_processor_gp;
+
+static irqreturn_t mailbox_interrupt(int irq, void *dev_id)
+{
+	const int coreid = cvmx_get_core_num();
+	uint64_t action;
+
+	/* Load the mailbox register to figure out what we're supposed to do */
+	action = cvmx_read_csr(CVMX_CIU_MBOX_CLRX(coreid));
+
+	/* Clear the mailbox to clear the interrupt */
+	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), action);
+
+	if (action & SMP_CALL_FUNCTION)
+		smp_call_function_interrupt();
+
+	/* Check if we've been told to flush the icache */
+	if (action & SMP_ICACHE_FLUSH)
+		asm volatile ("synci 0($0)\n");
+	return IRQ_HANDLED;
+}
+
+/**
+ * Cause the function described by call_data to be executed on the passed
+ * cpu.  When the function has finished, increment the finished field of
+ * call_data.
+ */
+void octeon_send_ipi_single(int cpu, unsigned int action)
+{
+	int coreid = cpu_logical_map(cpu);
+	/*
+	pr_info("SMP: Mailbox send cpu=%d, coreid=%d, action=%u\n", cpu,
+	       coreid, action);
+	*/
+	cvmx_write_csr(CVMX_CIU_MBOX_SETX(coreid), action);
+}
+
+static inline void octeon_send_ipi_mask(cpumask_t mask, unsigned int action)
+{
+	unsigned int i;
+
+	for_each_cpu_mask(i, mask)
+		octeon_send_ipi_single(i, action);
+}
+
+/**
+ * Detect available CPUs, populate phys_cpu_present_map
+ */
+static void octeon_smp_setup(void)
+{
+	const int coreid = cvmx_get_core_num();
+	int cpus;
+	int id;
+
+	int core_mask = octeon_get_boot_coremask();
+
+	cpus_clear(cpu_possible_map);
+	__cpu_number_map[coreid] = 0;
+	__cpu_logical_map[0] = coreid;
+	cpu_set(0, cpu_possible_map);
+
+	cpus = 1;
+	for (id = 0; id < 16; id++) {
+		if ((id != coreid) && (core_mask & (1 << id))) {
+			cpu_set(cpus, cpu_possible_map);
+			__cpu_number_map[id] = cpus;
+			__cpu_logical_map[cpus] = id;
+			cpus++;
+		}
+	}
+}
+
+/**
+ * Firmware CPU startup hook
+ *
+ */
+static void octeon_boot_secondary(int cpu, struct task_struct *idle)
+{
+	int count;
+
+	pr_info("SMP: Booting CPU%02d (CoreId %2d)...\n", cpu,
+		cpu_logical_map(cpu));
+
+	octeon_processor_sp = __KSTK_TOS(idle);
+	octeon_processor_gp = (unsigned long)(task_thread_info(idle));
+	octeon_processor_boot = cpu_logical_map(cpu);
+	mb();
+
+	count = 10000;
+	while (octeon_processor_sp && count) {
+		/* Waiting for processor to get the SP and GP */
+		udelay(1);
+		count--;
+	}
+	if (count == 0)
+		pr_err("Secondary boot timeout\n");
+}
+
+/**
+ * After we've done initial boot, this function is called to allow the
+ * board code to clean up state, if needed
+ */
+static void octeon_init_secondary(void)
+{
+	const int coreid = cvmx_get_core_num();
+	union cvmx_ciu_intx_sum0 interrupt_enable;
+
+	octeon_check_cpu_bist();
+	octeon_init_cvmcount();
+	/*
+	pr_info("SMP: CPU%d (CoreId %lu) started\n", cpu, coreid);
+	*/
+	/* Enable Mailbox interrupts to this core. These are the only
+	   interrupts allowed on line 3 */
+	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(coreid), 0xffffffff);
+	interrupt_enable.u64 = 0;
+	interrupt_enable.s.mbox = 0x3;
+	cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2)), interrupt_enable.u64);
+	cvmx_write_csr(CVMX_CIU_INTX_EN0((coreid * 2 + 1)), 0);
+	cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2)), 0);
+	cvmx_write_csr(CVMX_CIU_INTX_EN1((coreid * 2 + 1)), 0);
+	/* Enable core interrupt processing for 2,3 and 7 */
+	set_c0_status(0x8c01);
+}
+
+/**
+ * Callout to firmware before smp_init
+ *
+ */
+void octeon_prepare_cpus(unsigned int max_cpus)
+{
+	cvmx_write_csr(CVMX_CIU_MBOX_CLRX(cvmx_get_core_num()), 0xffffffff);
+	if (request_irq(OCTEON_IRQ_MBOX0, mailbox_interrupt, IRQF_SHARED,
+			"mailbox0", mailbox_interrupt)) {
+		panic("Cannot request_irq(OCTEON_IRQ_MBOX0)\n");
+	}
+	if (request_irq(OCTEON_IRQ_MBOX1, mailbox_interrupt, IRQF_SHARED,
+			"mailbox1", mailbox_interrupt)) {
+		panic("Cannot request_irq(OCTEON_IRQ_MBOX1)\n");
+	}
+}
+
+/**
+ * Last chance for the board code to finish SMP initialization before
+ * the CPU is "online".
+ */
+static void octeon_smp_finish(void)
+{
+#ifdef CONFIG_CAVIUM_GDB
+	unsigned long tmp;
+	/* Pulse MCD0 signal on Ctrl-C to stop all the cores. Also set the MCD0
+	   to be not masked by this core so we know the signal is received by
+	   someone */
+	asm volatile ("dmfc0 %0, $22\n"
+		      "ori   %0, %0, 0x9100\n" "dmtc0 %0, $22\n" : "=r" (tmp));
+#endif
+
+	octeon_user_io_init();
+
+	/* to generate the first CPU timer interrupt */
+	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+}
+
+/**
+ * Hook for after all CPUs are online
+ */
+static void octeon_cpus_done(void)
+{
+#ifdef CONFIG_CAVIUM_GDB
+	unsigned long tmp;
+	/* Pulse MCD0 signal on Ctrl-C to stop all the cores. Also set the MCD0
+	   to be not masked by this core so we know the signal is received by
+	   someone */
+	asm volatile ("dmfc0 %0, $22\n"
+		      "ori   %0, %0, 0x9100\n" "dmtc0 %0, $22\n" : "=r" (tmp));
+#endif
+}
+
+struct plat_smp_ops octeon_smp_ops = {
+	.send_ipi_single	= octeon_send_ipi_single,
+	.send_ipi_mask		= octeon_send_ipi_mask,
+	.init_secondary		= octeon_init_secondary,
+	.smp_finish		= octeon_smp_finish,
+	.cpus_done		= octeon_cpus_done,
+	.boot_secondary		= octeon_boot_secondary,
+	.smp_setup		= octeon_smp_setup,
+	.prepare_cpus		= octeon_prepare_cpus,
+};
diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
new file mode 100644
index 00000000000..04ce6e6569d
--- /dev/null
+++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
@@ -0,0 +1,78 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Cavium Networks
+ */
+#ifndef __ASM_MACH_CAVIUM_OCTEON_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_CAVIUM_OCTEON_CPU_FEATURE_OVERRIDES_H
+
+#include <linux/types.h>
+#include <asm/mipsregs.h>
+
+/*
+ * Cavium Octeons are MIPS64v2 processors
+ */
+#define cpu_dcache_line_size()	128
+#define cpu_icache_line_size()	128
+
+
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_4k_cache	0
+#define cpu_has_tx39_cache	0
+#define cpu_has_fpu		0
+#define cpu_has_counter		1
+#define cpu_has_watch		1
+#define cpu_has_divec		1
+#define cpu_has_vce		0
+#define cpu_has_cache_cdex_p	0
+#define cpu_has_cache_cdex_s	0
+#define cpu_has_prefetch	1
+
+/*
+ * We should disable LL/SC on non SMP systems as it is faster to
+ * disable interrupts for atomic access than a LL/SC.  Unfortunatly we
+ * cannot as this breaks asm/futex.h
+ */
+#define cpu_has_llsc		1
+#define cpu_has_vtag_icache	1
+#define cpu_has_dc_aliases	0
+#define cpu_has_ic_fills_f_dc	0
+#define cpu_has_64bits		1
+#define cpu_has_octeon_cache	1
+#define cpu_has_saa		octeon_has_saa()
+#define cpu_has_mips32r1	0
+#define cpu_has_mips32r2	0
+#define cpu_has_mips64r1	0
+#define cpu_has_mips64r2	1
+#define cpu_has_dsp		0
+#define cpu_has_mipsmt		0
+#define cpu_has_userlocal	0
+#define cpu_has_vint		0
+#define cpu_has_veic		0
+#define ARCH_HAS_READ_CURRENT_TIMER 1
+#define ARCH_HAS_IRQ_PER_CPU	1
+#define ARCH_HAS_SPINLOCK_PREFETCH 1
+#define spin_lock_prefetch(x) prefetch(x)
+#define PREFETCH_STRIDE 128
+
+static inline int read_current_timer(unsigned long *result)
+{
+	asm volatile ("rdhwr %0,$31\n"
+#ifndef CONFIG_64BIT
+		      "\tsll %0, 0"
+#endif
+		      : "=r" (*result));
+	return 0;
+}
+
+static inline int octeon_has_saa(void)
+{
+	int id;
+	asm volatile ("mfc0 %0, $15,0" : "=r" (id));
+	return id >= 0x000d0300;
+}
+
+#endif
diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
new file mode 100644
index 00000000000..f30fce92aab
--- /dev/null
+++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
@@ -0,0 +1,64 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ *
+ *
+ * Similar to mach-generic/dma-coherence.h except
+ * plat_device_is_coherent hard coded to return 1.
+ *
+ */
+#ifndef __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
+#define __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
+
+struct device;
+
+dma_addr_t octeon_map_dma_mem(struct device *, void *, size_t);
+void octeon_unmap_dma_mem(struct device *, dma_addr_t);
+
+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
+	size_t size)
+{
+	return octeon_map_dma_mem(dev, addr, size);
+}
+
+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
+	struct page *page)
+{
+	return octeon_map_dma_mem(dev, page_address(page), PAGE_SIZE);
+}
+
+static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
+{
+	return dma_addr;
+}
+
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
+{
+	octeon_unmap_dma_mem(dev, dma_addr);
+}
+
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+	return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+	mb();
+}
+
+static inline int plat_device_is_coherent(struct device *dev)
+{
+	return 1;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+					 dma_addr_t dma_addr)
+{
+	return dma_addr == -1;
+}
+
+#endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/irq.h b/arch/mips/include/asm/mach-cavium-octeon/irq.h
new file mode 100644
index 00000000000..d32220fbf4f
--- /dev/null
+++ b/arch/mips/include/asm/mach-cavium-octeon/irq.h
@@ -0,0 +1,244 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2008 Cavium Networks
+ */
+#ifndef __OCTEON_IRQ_H__
+#define __OCTEON_IRQ_H__
+
+#define NR_IRQS OCTEON_IRQ_LAST
+#define MIPS_CPU_IRQ_BASE OCTEON_IRQ_SW0
+
+/* 0 - 7 represent the i8259 master */
+#define OCTEON_IRQ_I8259M0	0
+#define OCTEON_IRQ_I8259M1	1
+#define OCTEON_IRQ_I8259M2	2
+#define OCTEON_IRQ_I8259M3	3
+#define OCTEON_IRQ_I8259M4	4
+#define OCTEON_IRQ_I8259M5	5
+#define OCTEON_IRQ_I8259M6	6
+#define OCTEON_IRQ_I8259M7	7
+/* 8 - 15 represent the i8259 slave */
+#define OCTEON_IRQ_I8259S0	8
+#define OCTEON_IRQ_I8259S1	9
+#define OCTEON_IRQ_I8259S2	10
+#define OCTEON_IRQ_I8259S3	11
+#define OCTEON_IRQ_I8259S4	12
+#define OCTEON_IRQ_I8259S5	13
+#define OCTEON_IRQ_I8259S6	14
+#define OCTEON_IRQ_I8259S7	15
+/* 16 - 23 represent the 8 MIPS standard interrupt sources */
+#define OCTEON_IRQ_SW0		16
+#define OCTEON_IRQ_SW1		17
+#define OCTEON_IRQ_CIU0		18
+#define OCTEON_IRQ_CIU1		19
+#define OCTEON_IRQ_CIU4		20
+#define OCTEON_IRQ_5		21
+#define OCTEON_IRQ_PERF		22
+#define OCTEON_IRQ_TIMER	23
+/* 24 - 87 represent the sources in CIU_INTX_EN0 */
+#define OCTEON_IRQ_WORKQ0	24
+#define OCTEON_IRQ_WORKQ1	25
+#define OCTEON_IRQ_WORKQ2	26
+#define OCTEON_IRQ_WORKQ3	27
+#define OCTEON_IRQ_WORKQ4	28
+#define OCTEON_IRQ_WORKQ5	29
+#define OCTEON_IRQ_WORKQ6	30
+#define OCTEON_IRQ_WORKQ7	31
+#define OCTEON_IRQ_WORKQ8	32
+#define OCTEON_IRQ_WORKQ9	33
+#define OCTEON_IRQ_WORKQ10	34
+#define OCTEON_IRQ_WORKQ11	35
+#define OCTEON_IRQ_WORKQ12	36
+#define OCTEON_IRQ_WORKQ13	37
+#define OCTEON_IRQ_WORKQ14	38
+#define OCTEON_IRQ_WORKQ15	39
+#define OCTEON_IRQ_GPIO0	40
+#define OCTEON_IRQ_GPIO1	41
+#define OCTEON_IRQ_GPIO2	42
+#define OCTEON_IRQ_GPIO3	43
+#define OCTEON_IRQ_GPIO4	44
+#define OCTEON_IRQ_GPIO5	45
+#define OCTEON_IRQ_GPIO6	46
+#define OCTEON_IRQ_GPIO7	47
+#define OCTEON_IRQ_GPIO8	48
+#define OCTEON_IRQ_GPIO9	49
+#define OCTEON_IRQ_GPIO10	50
+#define OCTEON_IRQ_GPIO11	51
+#define OCTEON_IRQ_GPIO12	52
+#define OCTEON_IRQ_GPIO13	53
+#define OCTEON_IRQ_GPIO14	54
+#define OCTEON_IRQ_GPIO15	55
+#define OCTEON_IRQ_MBOX0	56
+#define OCTEON_IRQ_MBOX1	57
+#define OCTEON_IRQ_UART0	58
+#define OCTEON_IRQ_UART1	59
+#define OCTEON_IRQ_PCI_INT0	60
+#define OCTEON_IRQ_PCI_INT1	61
+#define OCTEON_IRQ_PCI_INT2	62
+#define OCTEON_IRQ_PCI_INT3	63
+#define OCTEON_IRQ_PCI_MSI0	64
+#define OCTEON_IRQ_PCI_MSI1	65
+#define OCTEON_IRQ_PCI_MSI2	66
+#define OCTEON_IRQ_PCI_MSI3	67
+#define OCTEON_IRQ_RESERVED68	68	/* Summary of CIU_INT_SUM1 */
+#define OCTEON_IRQ_TWSI		69
+#define OCTEON_IRQ_RML		70
+#define OCTEON_IRQ_TRACE	71
+#define OCTEON_IRQ_GMX_DRP0	72
+#define OCTEON_IRQ_GMX_DRP1	73
+#define OCTEON_IRQ_IPD_DRP	74
+#define OCTEON_IRQ_KEY_ZERO	75
+#define OCTEON_IRQ_TIMER0	76
+#define OCTEON_IRQ_TIMER1	77
+#define OCTEON_IRQ_TIMER2	78
+#define OCTEON_IRQ_TIMER3	79
+#define OCTEON_IRQ_USB0		80
+#define OCTEON_IRQ_PCM		81
+#define OCTEON_IRQ_MPI		82
+#define OCTEON_IRQ_TWSI2	83
+#define OCTEON_IRQ_POWIQ	84
+#define OCTEON_IRQ_IPDPPTHR	85
+#define OCTEON_IRQ_MII0		86
+#define OCTEON_IRQ_BOOTDMA	87
+/* 88 - 151 represent the sources in CIU_INTX_EN1 */
+#define OCTEON_IRQ_WDOG0	88
+#define OCTEON_IRQ_WDOG1	89
+#define OCTEON_IRQ_WDOG2	90
+#define OCTEON_IRQ_WDOG3	91
+#define OCTEON_IRQ_WDOG4	92
+#define OCTEON_IRQ_WDOG5	93
+#define OCTEON_IRQ_WDOG6	94
+#define OCTEON_IRQ_WDOG7	95
+#define OCTEON_IRQ_WDOG8	96
+#define OCTEON_IRQ_WDOG9	97
+#define OCTEON_IRQ_WDOG10	98
+#define OCTEON_IRQ_WDOG11	99
+#define OCTEON_IRQ_WDOG12	100
+#define OCTEON_IRQ_WDOG13	101
+#define OCTEON_IRQ_WDOG14	102
+#define OCTEON_IRQ_WDOG15	103
+#define OCTEON_IRQ_UART2	104
+#define OCTEON_IRQ_USB1		105
+#define OCTEON_IRQ_MII1		106
+#define OCTEON_IRQ_RESERVED107	107
+#define OCTEON_IRQ_RESERVED108	108
+#define OCTEON_IRQ_RESERVED109	109
+#define OCTEON_IRQ_RESERVED110	110
+#define OCTEON_IRQ_RESERVED111	111
+#define OCTEON_IRQ_RESERVED112	112
+#define OCTEON_IRQ_RESERVED113	113
+#define OCTEON_IRQ_RESERVED114	114
+#define OCTEON_IRQ_RESERVED115	115
+#define OCTEON_IRQ_RESERVED116	116
+#define OCTEON_IRQ_RESERVED117	117
+#define OCTEON_IRQ_RESERVED118	118
+#define OCTEON_IRQ_RESERVED119	119
+#define OCTEON_IRQ_RESERVED120	120
+#define OCTEON_IRQ_RESERVED121	121
+#define OCTEON_IRQ_RESERVED122	122
+#define OCTEON_IRQ_RESERVED123	123
+#define OCTEON_IRQ_RESERVED124	124
+#define OCTEON_IRQ_RESERVED125	125
+#define OCTEON_IRQ_RESERVED126	126
+#define OCTEON_IRQ_RESERVED127	127
+#define OCTEON_IRQ_RESERVED128	128
+#define OCTEON_IRQ_RESERVED129	129
+#define OCTEON_IRQ_RESERVED130	130
+#define OCTEON_IRQ_RESERVED131	131
+#define OCTEON_IRQ_RESERVED132	132
+#define OCTEON_IRQ_RESERVED133	133
+#define OCTEON_IRQ_RESERVED134	134
+#define OCTEON_IRQ_RESERVED135	135
+#define OCTEON_IRQ_RESERVED136	136
+#define OCTEON_IRQ_RESERVED137	137
+#define OCTEON_IRQ_RESERVED138	138
+#define OCTEON_IRQ_RESERVED139	139
+#define OCTEON_IRQ_RESERVED140	140
+#define OCTEON_IRQ_RESERVED141	141
+#define OCTEON_IRQ_RESERVED142	142
+#define OCTEON_IRQ_RESERVED143	143
+#define OCTEON_IRQ_RESERVED144	144
+#define OCTEON_IRQ_RESERVED145	145
+#define OCTEON_IRQ_RESERVED146	146
+#define OCTEON_IRQ_RESERVED147	147
+#define OCTEON_IRQ_RESERVED148	148
+#define OCTEON_IRQ_RESERVED149	149
+#define OCTEON_IRQ_RESERVED150	150
+#define OCTEON_IRQ_RESERVED151	151
+
+#ifdef CONFIG_PCI_MSI
+/* 152 - 215 represent the MSI interrupts 0-63 */
+#define OCTEON_IRQ_MSI_BIT0	152
+#define OCTEON_IRQ_MSI_BIT1	153
+#define OCTEON_IRQ_MSI_BIT2	154
+#define OCTEON_IRQ_MSI_BIT3	155
+#define OCTEON_IRQ_MSI_BIT4	156
+#define OCTEON_IRQ_MSI_BIT5	157
+#define OCTEON_IRQ_MSI_BIT6	158
+#define OCTEON_IRQ_MSI_BIT7	159
+#define OCTEON_IRQ_MSI_BIT8	160
+#define OCTEON_IRQ_MSI_BIT9	161
+#define OCTEON_IRQ_MSI_BIT10	162
+#define OCTEON_IRQ_MSI_BIT11	163
+#define OCTEON_IRQ_MSI_BIT12	164
+#define OCTEON_IRQ_MSI_BIT13	165
+#define OCTEON_IRQ_MSI_BIT14	166
+#define OCTEON_IRQ_MSI_BIT15	167
+#define OCTEON_IRQ_MSI_BIT16	168
+#define OCTEON_IRQ_MSI_BIT17	169
+#define OCTEON_IRQ_MSI_BIT18	170
+#define OCTEON_IRQ_MSI_BIT19	171
+#define OCTEON_IRQ_MSI_BIT20	172
+#define OCTEON_IRQ_MSI_BIT21	173
+#define OCTEON_IRQ_MSI_BIT22	174
+#define OCTEON_IRQ_MSI_BIT23	175
+#define OCTEON_IRQ_MSI_BIT24	176
+#define OCTEON_IRQ_MSI_BIT25	177
+#define OCTEON_IRQ_MSI_BIT26	178
+#define OCTEON_IRQ_MSI_BIT27	179
+#define OCTEON_IRQ_MSI_BIT28	180
+#define OCTEON_IRQ_MSI_BIT29	181
+#define OCTEON_IRQ_MSI_BIT30	182
+#define OCTEON_IRQ_MSI_BIT31	183
+#define OCTEON_IRQ_MSI_BIT32	184
+#define OCTEON_IRQ_MSI_BIT33	185
+#define OCTEON_IRQ_MSI_BIT34	186
+#define OCTEON_IRQ_MSI_BIT35	187
+#define OCTEON_IRQ_MSI_BIT36	188
+#define OCTEON_IRQ_MSI_BIT37	189
+#define OCTEON_IRQ_MSI_BIT38	190
+#define OCTEON_IRQ_MSI_BIT39	191
+#define OCTEON_IRQ_MSI_BIT40	192
+#define OCTEON_IRQ_MSI_BIT41	193
+#define OCTEON_IRQ_MSI_BIT42	194
+#define OCTEON_IRQ_MSI_BIT43	195
+#define OCTEON_IRQ_MSI_BIT44	196
+#define OCTEON_IRQ_MSI_BIT45	197
+#define OCTEON_IRQ_MSI_BIT46	198
+#define OCTEON_IRQ_MSI_BIT47	199
+#define OCTEON_IRQ_MSI_BIT48	200
+#define OCTEON_IRQ_MSI_BIT49	201
+#define OCTEON_IRQ_MSI_BIT50	202
+#define OCTEON_IRQ_MSI_BIT51	203
+#define OCTEON_IRQ_MSI_BIT52	204
+#define OCTEON_IRQ_MSI_BIT53	205
+#define OCTEON_IRQ_MSI_BIT54	206
+#define OCTEON_IRQ_MSI_BIT55	207
+#define OCTEON_IRQ_MSI_BIT56	208
+#define OCTEON_IRQ_MSI_BIT57	209
+#define OCTEON_IRQ_MSI_BIT58	210
+#define OCTEON_IRQ_MSI_BIT59	211
+#define OCTEON_IRQ_MSI_BIT60	212
+#define OCTEON_IRQ_MSI_BIT61	213
+#define OCTEON_IRQ_MSI_BIT62	214
+#define OCTEON_IRQ_MSI_BIT63	215
+
+#define OCTEON_IRQ_LAST         216
+#else
+#define OCTEON_IRQ_LAST         152
+#endif
+
+#endif
diff --git a/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
new file mode 100644
index 00000000000..0b2b5eb22e9
--- /dev/null
+++ b/arch/mips/include/asm/mach-cavium-octeon/kernel-entry-init.h
@@ -0,0 +1,131 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005-2008 Cavium Networks, Inc
+ */
+#ifndef __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H
+#define __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H
+
+
+#define CP0_CYCLE_COUNTER $9, 6
+#define CP0_CVMCTL_REG $9, 7
+#define CP0_CVMMEMCTL_REG $11,7
+#define CP0_PRID_REG $15, 0
+#define CP0_PRID_OCTEON_PASS1 0x000d0000
+#define CP0_PRID_OCTEON_CN30XX 0x000d0200
+
+.macro  kernel_entry_setup
+	# Registers set by bootloader:
+	# (only 32 bits set by bootloader, all addresses are physical
+	# addresses, and need to have the appropriate memory region set
+	# by the kernel
+	# a0 = argc
+	# a1 = argv (kseg0 compat addr)
+	# a2 = 1 if init core, zero otherwise
+	# a3 = address of boot descriptor block
+	.set push
+	.set arch=octeon
+	# Read the cavium mem control register
+	dmfc0   v0, CP0_CVMMEMCTL_REG
+	# Clear the lower 6 bits, the CVMSEG size
+	dins    v0, $0, 0, 6
+	ori     v0, CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE
+	dmtc0   v0, CP0_CVMMEMCTL_REG	# Write the cavium mem control register
+	dmfc0   v0, CP0_CVMCTL_REG	# Read the cavium control register
+#ifdef CONFIG_CAVIUM_OCTEON_HW_FIX_UNALIGNED
+	# Disable unaligned load/store support but leave HW fixup enabled
+	or  v0, v0, 0x5001
+	xor v0, v0, 0x1001
+#else
+	# Disable unaligned load/store and HW fixup support
+	or  v0, v0, 0x5001
+	xor v0, v0, 0x5001
+#endif
+	# Read the processor ID register
+	mfc0 v1, CP0_PRID_REG
+	# Disable instruction prefetching (Octeon Pass1 errata)
+	or  v0, v0, 0x2000
+	# Skip reenable of prefetching for Octeon Pass1
+	beq v1, CP0_PRID_OCTEON_PASS1, skip
+	nop
+	# Reenable instruction prefetching, not on Pass1
+	xor v0, v0, 0x2000
+	# Strip off pass number off of processor id
+	srl v1, 8
+	sll v1, 8
+	# CN30XX needs some extra stuff turned off for better performance
+	bne v1, CP0_PRID_OCTEON_CN30XX, skip
+	nop
+	# CN30XX Use random Icache replacement
+	or  v0, v0, 0x400
+	# CN30XX Disable instruction prefetching
+	or  v0, v0, 0x2000
+skip:
+	# Write the cavium control register
+	dmtc0   v0, CP0_CVMCTL_REG
+	sync
+	# Flush dcache after config change
+	cache   9, 0($0)
+	# Get my core id
+	rdhwr   v0, $0
+	# Jump the master to kernel_entry
+	bne     a2, zero, octeon_main_processor
+	nop
+
+#ifdef CONFIG_SMP
+
+	#
+	# All cores other than the master need to wait here for SMP bootstrap
+	# to begin
+	#
+
+	# This is the variable where the next core to boot os stored
+	PTR_LA  t0, octeon_processor_boot
+octeon_spin_wait_boot:
+	# Get the core id of the next to be booted
+	LONG_L  t1, (t0)
+	# Keep looping if it isn't me
+	bne t1, v0, octeon_spin_wait_boot
+	nop
+	# Get my GP from the global variable
+	PTR_LA  t0, octeon_processor_gp
+	LONG_L  gp, (t0)
+	# Get my SP from the global variable
+	PTR_LA  t0, octeon_processor_sp
+	LONG_L  sp, (t0)
+	# Set the SP global variable to zero so the master knows we've started
+	LONG_S  zero, (t0)
+#ifdef __OCTEON__
+	syncw
+	syncw
+#else
+	sync
+#endif
+	# Jump to the normal Linux SMP entry point
+	j   smp_bootstrap
+	nop
+#else /* CONFIG_SMP */
+
+	#
+	# Someone tried to boot SMP with a non SMP kernel. All extra cores
+	# will halt here.
+	#
+octeon_wait_forever:
+	wait
+	b   octeon_wait_forever
+	nop
+
+#endif /* CONFIG_SMP */
+octeon_main_processor:
+	.set pop
+.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can savely execute C code.
+ */
+	.macro  smp_slave_setup
+	.endm
+
+#endif /* __ASM_MACH_CAVIUM_OCTEON_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/war.h b/arch/mips/include/asm/mach-cavium-octeon/war.h
new file mode 100644
index 00000000000..c4712d7cc81
--- /dev/null
+++ b/arch/mips/include/asm/mach-cavium-octeon/war.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2008 Cavium Networks <support@caviumnetworks.com>
+ */
+#ifndef __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H
+#define __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define RM9000_CDEX_SMP_WAR		0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_CAVIUM_OCTEON_WAR_H */
diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h
new file mode 100644
index 00000000000..edc676084cd
--- /dev/null
+++ b/arch/mips/include/asm/octeon/octeon.h
@@ -0,0 +1,248 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004-2008 Cavium Networks
+ */
+#ifndef __ASM_OCTEON_OCTEON_H
+#define __ASM_OCTEON_OCTEON_H
+
+#include "cvmx.h"
+
+extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size,
+						uint64_t alignment,
+						uint64_t min_addr,
+						uint64_t max_addr,
+						int do_locking);
+extern void *octeon_bootmem_alloc(uint64_t size, uint64_t alignment,
+				  int do_locking);
+extern void *octeon_bootmem_alloc_range(uint64_t size, uint64_t alignment,
+					uint64_t min_addr, uint64_t max_addr,
+					int do_locking);
+extern void *octeon_bootmem_alloc_named(uint64_t size, uint64_t alignment,
+					char *name);
+extern void *octeon_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr,
+					      uint64_t max_addr, uint64_t align,
+					      char *name);
+extern void *octeon_bootmem_alloc_named_address(uint64_t size, uint64_t address,
+						char *name);
+extern int octeon_bootmem_free_named(char *name);
+extern void octeon_bootmem_lock(void);
+extern void octeon_bootmem_unlock(void);
+
+extern int octeon_is_simulation(void);
+extern int octeon_is_pci_host(void);
+extern int octeon_usb_is_ref_clk(void);
+extern uint64_t octeon_get_clock_rate(void);
+extern const char *octeon_board_type_string(void);
+extern const char *octeon_get_pci_interrupts(void);
+extern int octeon_get_southbridge_interrupt(void);
+extern int octeon_get_boot_coremask(void);
+extern int octeon_get_boot_num_arguments(void);
+extern const char *octeon_get_boot_argument(int arg);
+extern void octeon_hal_setup_reserved32(void);
+extern void octeon_user_io_init(void);
+struct octeon_cop2_state;
+extern unsigned long octeon_crypto_enable(struct octeon_cop2_state *state);
+extern void octeon_crypto_disable(struct octeon_cop2_state *state,
+				  unsigned long flags);
+
+extern void octeon_init_cvmcount(void);
+
+#define OCTEON_ARGV_MAX_ARGS	64
+#define OCTOEN_SERIAL_LEN	20
+
+struct octeon_boot_descriptor {
+	/* Start of block referenced by assembly code - do not change! */
+	uint32_t desc_version;
+	uint32_t desc_size;
+	uint64_t stack_top;
+	uint64_t heap_base;
+	uint64_t heap_end;
+	/* Only used by bootloader */
+	uint64_t entry_point;
+	uint64_t desc_vaddr;
+	/* End of This block referenced by assembly code - do not change! */
+	uint32_t exception_base_addr;
+	uint32_t stack_size;
+	uint32_t heap_size;
+	/* Argc count for application. */
+	uint32_t argc;
+	uint32_t argv[OCTEON_ARGV_MAX_ARGS];
+
+#define  BOOT_FLAG_INIT_CORE		(1 << 0)
+#define  OCTEON_BL_FLAG_DEBUG		(1 << 1)
+#define  OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
+	/* If set, use uart1 for console */
+#define  OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
+	/* If set, use PCI console */
+#define  OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
+	/* Call exit on break on serial port */
+#define  OCTEON_BL_FLAG_BREAK		(1 << 5)
+
+	uint32_t flags;
+	uint32_t core_mask;
+	/* DRAM size in megabyes. */
+	uint32_t dram_size;
+	/* physical address of free memory descriptor block. */
+	uint32_t phy_mem_desc_addr;
+	/* used to pass flags from app to debugger. */
+	uint32_t debugger_flags_base_addr;
+	/* CPU clock speed, in hz. */
+	uint32_t eclock_hz;
+	/* DRAM clock speed, in hz. */
+	uint32_t dclock_hz;
+	/* SPI4 clock in hz. */
+	uint32_t spi_clock_hz;
+	uint16_t board_type;
+	uint8_t board_rev_major;
+	uint8_t board_rev_minor;
+	uint16_t chip_type;
+	uint8_t chip_rev_major;
+	uint8_t chip_rev_minor;
+	char board_serial_number[OCTOEN_SERIAL_LEN];
+	uint8_t mac_addr_base[6];
+	uint8_t mac_addr_count;
+	uint64_t cvmx_desc_vaddr;
+};
+
+union octeon_cvmemctl {
+	uint64_t u64;
+	struct {
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		uint64_t tlbbist:1;
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		uint64_t l1cbist:1;
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		uint64_t l1dbist:1;
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		uint64_t dcmbist:1;
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		uint64_t ptgbist:1;
+		/* RO 1 = BIST fail, 0 = BIST pass */
+		uint64_t wbfbist:1;
+		/* Reserved */
+		uint64_t reserved:22;
+		/* R/W If set, marked write-buffer entries time out
+		 * the same as as other entries; if clear, marked
+		 * write-buffer entries use the maximum timeout. */
+		uint64_t dismarkwblongto:1;
+		/* R/W If set, a merged store does not clear the
+		 * write-buffer entry timeout state. */
+		uint64_t dismrgclrwbto:1;
+		/* R/W Two bits that are the MSBs of the resultant
+		 * CVMSEG LM word location for an IOBDMA. The other 8
+		 * bits come from the SCRADDR field of the IOBDMA. */
+		uint64_t iobdmascrmsb:2;
+		/* R/W If set, SYNCWS and SYNCS only order marked
+		 * stores; if clear, SYNCWS and SYNCS only order
+		 * unmarked stores. SYNCWSMARKED has no effect when
+		 * DISSYNCWS is set. */
+		uint64_t syncwsmarked:1;
+		/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as
+		 * SYNC. */
+		uint64_t dissyncws:1;
+		/* R/W If set, no stall happens on write buffer
+		 * full. */
+		uint64_t diswbfst:1;
+		/* R/W If set (and SX set), supervisor-level
+		 * loads/stores can use XKPHYS addresses with
+		 * VA<48>==0 */
+		uint64_t xkmemenas:1;
+		/* R/W If set (and UX set), user-level loads/stores
+		 * can use XKPHYS addresses with VA<48>==0 */
+		uint64_t xkmemenau:1;
+		/* R/W If set (and SX set), supervisor-level
+		 * loads/stores can use XKPHYS addresses with
+		 * VA<48>==1 */
+		uint64_t xkioenas:1;
+		/* R/W If set (and UX set), user-level loads/stores
+		 * can use XKPHYS addresses with VA<48>==1 */
+		uint64_t xkioenau:1;
+		/* R/W If set, all stores act as SYNCW (NOMERGE must
+		 * be set when this is set) RW, reset to 0. */
+		uint64_t allsyncw:1;
+		/* R/W If set, no stores merge, and all stores reach
+		 * the coherent bus in order. */
+		uint64_t nomerge:1;
+		/* R/W Selects the bit in the counter used for DID
+		 * time-outs 0 = 231, 1 = 230, 2 = 229, 3 =
+		 * 214. Actual time-out is between 1x and 2x this
+		 * interval. For example, with DIDTTO=3, expiration
+		 * interval is between 16K and 32K. */
+		uint64_t didtto:2;
+		/* R/W If set, the (mem) CSR clock never turns off. */
+		uint64_t csrckalwys:1;
+		/* R/W If set, mclk never turns off. */
+		uint64_t mclkalwys:1;
+		/* R/W Selects the bit in the counter used for write
+		 * buffer flush time-outs (WBFLT+11) is the bit
+		 * position in an internal counter used to determine
+		 * expiration. The write buffer expires between 1x and
+		 * 2x this interval. For example, with WBFLT = 0, a
+		 * write buffer expires between 2K and 4K cycles after
+		 * the write buffer entry is allocated. */
+		uint64_t wbfltime:3;
+		/* R/W If set, do not put Istream in the L2 cache. */
+		uint64_t istrnol2:1;
+		/* R/W The write buffer threshold. */
+		uint64_t wbthresh:4;
+		/* Reserved */
+		uint64_t reserved2:2;
+		/* R/W If set, CVMSEG is available for loads/stores in
+		 * kernel/debug mode. */
+		uint64_t cvmsegenak:1;
+		/* R/W If set, CVMSEG is available for loads/stores in
+		 * supervisor mode. */
+		uint64_t cvmsegenas:1;
+		/* R/W If set, CVMSEG is available for loads/stores in
+		 * user mode. */
+		uint64_t cvmsegenau:1;
+		/* R/W Size of local memory in cache blocks, 54 (6912
+		 * bytes) is max legal value. */
+		uint64_t lmemsz:6;
+	} s;
+};
+
+struct octeon_cf_data {
+	unsigned long	base_region_bias;
+	unsigned int	base_region;	/* The chip select region used by CF */
+	int		is16bit;	/* 0 - 8bit, !0 - 16bit */
+	int		dma_engine;	/* -1 for no DMA */
+};
+
+extern void octeon_write_lcd(const char *s);
+extern void octeon_check_cpu_bist(void);
+extern int octeon_get_boot_debug_flag(void);
+extern int octeon_get_boot_uart(void);
+
+struct uart_port;
+extern unsigned int octeon_serial_in(struct uart_port *, int);
+extern void octeon_serial_out(struct uart_port *, int, int);
+
+/**
+ * Write a 32bit value to the Octeon NPI register space
+ *
+ * @address: Address to write to
+ * @val:     Value to write
+ */
+static inline void octeon_npi_write32(uint64_t address, uint32_t val)
+{
+	cvmx_write64_uint32(address ^ 4, val);
+	cvmx_read64_uint32(address ^ 4);
+}
+
+
+/**
+ * Read a 32bit value from the Octeon NPI register space
+ *
+ * @address: Address to read
+ * Returns The result
+ */
+static inline uint32_t octeon_npi_read32(uint64_t address)
+{
+	return cvmx_read64_uint32(address ^ 4);
+}
+
+#endif /* __ASM_OCTEON_OCTEON_H */
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
new file mode 100644
index 00000000000..d52389672b0
--- /dev/null
+++ b/arch/mips/kernel/octeon_switch.S
@@ -0,0 +1,506 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 1995, 1996, 1998, 1999, 2002, 2003 Ralf Baechle
+ * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1994, 1995, 1996, by Andreas Busse
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ *    written by Carsten Langgaard, carstenl@mips.com
+ */
+#include <asm/asm.h>
+#include <asm/cachectl.h>
+#include <asm/fpregdef.h>
+#include <asm/mipsregs.h>
+#include <asm/asm-offsets.h>
+#include <asm/page.h>
+#include <asm/pgtable-bits.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include <asm/thread_info.h>
+
+#include <asm/asmmacro.h>
+
+/*
+ * Offset to the current process status flags, the first 32 bytes of the
+ * stack are not used.
+ */
+#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
+
+/*
+ * task_struct *resume(task_struct *prev, task_struct *next,
+ *                     struct thread_info *next_ti)
+ */
+	.align	7
+	LEAF(resume)
+	.set arch=octeon
+#ifndef CONFIG_CPU_HAS_LLSC
+	sw	zero, ll_bit
+#endif
+	mfc0	t1, CP0_STATUS
+	LONG_S	t1, THREAD_STATUS(a0)
+	cpu_save_nonscratch a0
+	LONG_S	ra, THREAD_REG31(a0)
+
+	/* check if we need to save COP2 registers */
+	PTR_L	t2, TASK_THREAD_INFO(a0)
+	LONG_L	t0, ST_OFF(t2)
+	bbit0	t0, 30, 1f
+
+	/* Disable COP2 in the stored process state */
+	li	t1, ST0_CU2
+	xor	t0, t1
+	LONG_S	t0, ST_OFF(t2)
+
+	/* Enable COP2 so we can save it */
+	mfc0	t0, CP0_STATUS
+	or	t0, t1
+	mtc0	t0, CP0_STATUS
+
+	/* Save COP2 */
+	daddu	a0, THREAD_CP2
+	jal octeon_cop2_save
+	dsubu	a0, THREAD_CP2
+
+	/* Disable COP2 now that we are done */
+	mfc0	t0, CP0_STATUS
+	li	t1, ST0_CU2
+	xor	t0, t1
+	mtc0	t0, CP0_STATUS
+
+1:
+#if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
+	/* Check if we need to store CVMSEG state */
+	mfc0	t0, $11,7 	/* CvmMemCtl */
+	bbit0	t0, 6, 3f	/* Is user access enabled? */
+
+	/* Store the CVMSEG state */
+	/* Extract the size of CVMSEG */
+	andi	t0, 0x3f
+	/* Multiply * (cache line size/sizeof(long)/2) */
+	sll	t0, 7-LONGLOG-1
+	li	t1, -32768 	/* Base address of CVMSEG */
+	LONG_ADDI t2, a0, THREAD_CVMSEG	/* Where to store CVMSEG to */
+	synciobdma
+2:
+	.set noreorder
+	LONG_L	t8, 0(t1)	/* Load from CVMSEG */
+	subu	t0, 1		/* Decrement loop var */
+	LONG_L	t9, LONGSIZE(t1)/* Load from CVMSEG */
+	LONG_ADDU t1, LONGSIZE*2 /* Increment loc in CVMSEG */
+	LONG_S	t8, 0(t2)	/* Store CVMSEG to thread storage */
+	LONG_ADDU t2, LONGSIZE*2 /* Increment loc in thread storage */
+	bnez	t0, 2b		/* Loop until we've copied it all */
+	 LONG_S	t9, -LONGSIZE(t2)/* Store CVMSEG to thread storage */
+	.set reorder
+
+	/* Disable access to CVMSEG */
+	mfc0	t0, $11,7 	/* CvmMemCtl */
+	xori	t0, t0, 0x40	/* Bit 6 is CVMSEG user enable */
+	mtc0	t0, $11,7 	/* CvmMemCtl */
+#endif
+3:
+	/*
+	 * The order of restoring the registers takes care of the race
+	 * updating $28, $29 and kernelsp without disabling ints.
+	 */
+	move	$28, a2
+	cpu_restore_nonscratch a1
+
+#if (_THREAD_SIZE - 32) < 0x8000
+	PTR_ADDIU	t0, $28, _THREAD_SIZE - 32
+#else
+	PTR_LI		t0, _THREAD_SIZE - 32
+	PTR_ADDU	t0, $28
+#endif
+	set_saved_sp	t0, t1, t2
+
+	mfc0	t1, CP0_STATUS		/* Do we really need this? */
+	li	a3, 0xff01
+	and	t1, a3
+	LONG_L	a2, THREAD_STATUS(a1)
+	nor	a3, $0, a3
+	and	a2, a3
+	or	a2, t1
+	mtc0	a2, CP0_STATUS
+	move	v0, a0
+	jr	ra
+	END(resume)
+
+/*
+ * void octeon_cop2_save(struct octeon_cop2_state *a0)
+ */
+	.align	7
+	LEAF(octeon_cop2_save)
+
+	dmfc0	t9, $9,7	/* CvmCtl register. */
+
+        /* Save the COP2 CRC state */
+	dmfc2	t0, 0x0201
+	dmfc2	t1, 0x0202
+	dmfc2	t2, 0x0200
+	sd	t0, OCTEON_CP2_CRC_IV(a0)
+	sd	t1, OCTEON_CP2_CRC_LENGTH(a0)
+	sd	t2, OCTEON_CP2_CRC_POLY(a0)
+	/* Skip next instructions if CvmCtl[NODFA_CP2] set */
+	bbit1	t9, 28, 1f
+
+	/* Save the LLM state */
+	dmfc2	t0, 0x0402
+	dmfc2	t1, 0x040A
+	sd	t0, OCTEON_CP2_LLM_DAT(a0)
+	sd	t1, OCTEON_CP2_LLM_DAT+8(a0)
+
+1:      bbit1	t9, 26, 3f	/* done if CvmCtl[NOCRYPTO] set */
+
+	/* Save the COP2 crypto state */
+        /* this part is mostly common to both pass 1 and later revisions */
+	dmfc2 	t0, 0x0084
+	dmfc2 	t1, 0x0080
+	dmfc2 	t2, 0x0081
+	dmfc2 	t3, 0x0082
+	sd	t0, OCTEON_CP2_3DES_IV(a0)
+	dmfc2 	t0, 0x0088
+	sd	t1, OCTEON_CP2_3DES_KEY(a0)
+	dmfc2 	t1, 0x0111                      /* only necessary for pass 1 */
+	sd	t2, OCTEON_CP2_3DES_KEY+8(a0)
+	dmfc2 	t2, 0x0102
+	sd	t3, OCTEON_CP2_3DES_KEY+16(a0)
+	dmfc2 	t3, 0x0103
+	sd	t0, OCTEON_CP2_3DES_RESULT(a0)
+	dmfc2 	t0, 0x0104
+	sd	t1, OCTEON_CP2_AES_INP0(a0)     /* only necessary for pass 1 */
+	dmfc2 	t1, 0x0105
+	sd	t2, OCTEON_CP2_AES_IV(a0)
+	dmfc2	t2, 0x0106
+	sd	t3, OCTEON_CP2_AES_IV+8(a0)
+	dmfc2 	t3, 0x0107
+	sd	t0, OCTEON_CP2_AES_KEY(a0)
+	dmfc2	t0, 0x0110
+	sd	t1, OCTEON_CP2_AES_KEY+8(a0)
+	dmfc2	t1, 0x0100
+	sd	t2, OCTEON_CP2_AES_KEY+16(a0)
+	dmfc2	t2, 0x0101
+	sd	t3, OCTEON_CP2_AES_KEY+24(a0)
+	mfc0	t3, $15,0 	/* Get the processor ID register */
+	sd	t0, OCTEON_CP2_AES_KEYLEN(a0)
+	li	t0, 0x000d0000	/* This is the processor ID of Octeon Pass1 */
+	sd	t1, OCTEON_CP2_AES_RESULT(a0)
+	sd	t2, OCTEON_CP2_AES_RESULT+8(a0)
+	/* Skip to the Pass1 version of the remainder of the COP2 state */
+	beq	t3, t0, 2f
+
+        /* the non-pass1 state when !CvmCtl[NOCRYPTO] */
+	dmfc2	t1, 0x0240
+	dmfc2	t2, 0x0241
+	dmfc2	t3, 0x0242
+	dmfc2	t0, 0x0243
+	sd	t1, OCTEON_CP2_HSH_DATW(a0)
+	dmfc2	t1, 0x0244
+	sd	t2, OCTEON_CP2_HSH_DATW+8(a0)
+	dmfc2	t2, 0x0245
+	sd	t3, OCTEON_CP2_HSH_DATW+16(a0)
+	dmfc2	t3, 0x0246
+	sd	t0, OCTEON_CP2_HSH_DATW+24(a0)
+	dmfc2	t0, 0x0247
+	sd	t1, OCTEON_CP2_HSH_DATW+32(a0)
+	dmfc2	t1, 0x0248
+	sd	t2, OCTEON_CP2_HSH_DATW+40(a0)
+	dmfc2	t2, 0x0249
+	sd	t3, OCTEON_CP2_HSH_DATW+48(a0)
+	dmfc2	t3, 0x024A
+	sd	t0, OCTEON_CP2_HSH_DATW+56(a0)
+	dmfc2	t0, 0x024B
+	sd	t1, OCTEON_CP2_HSH_DATW+64(a0)
+	dmfc2	t1, 0x024C
+	sd	t2, OCTEON_CP2_HSH_DATW+72(a0)
+	dmfc2	t2, 0x024D
+	sd	t3, OCTEON_CP2_HSH_DATW+80(a0)
+	dmfc2 	t3, 0x024E
+	sd	t0, OCTEON_CP2_HSH_DATW+88(a0)
+	dmfc2	t0, 0x0250
+	sd	t1, OCTEON_CP2_HSH_DATW+96(a0)
+	dmfc2	t1, 0x0251
+	sd	t2, OCTEON_CP2_HSH_DATW+104(a0)
+	dmfc2	t2, 0x0252
+	sd	t3, OCTEON_CP2_HSH_DATW+112(a0)
+	dmfc2	t3, 0x0253
+	sd	t0, OCTEON_CP2_HSH_IVW(a0)
+	dmfc2	t0, 0x0254
+	sd	t1, OCTEON_CP2_HSH_IVW+8(a0)
+	dmfc2	t1, 0x0255
+	sd	t2, OCTEON_CP2_HSH_IVW+16(a0)
+	dmfc2	t2, 0x0256
+	sd	t3, OCTEON_CP2_HSH_IVW+24(a0)
+	dmfc2	t3, 0x0257
+	sd	t0, OCTEON_CP2_HSH_IVW+32(a0)
+	dmfc2 	t0, 0x0258
+	sd	t1, OCTEON_CP2_HSH_IVW+40(a0)
+	dmfc2 	t1, 0x0259
+	sd	t2, OCTEON_CP2_HSH_IVW+48(a0)
+	dmfc2	t2, 0x025E
+	sd	t3, OCTEON_CP2_HSH_IVW+56(a0)
+	dmfc2	t3, 0x025A
+	sd	t0, OCTEON_CP2_GFM_MULT(a0)
+	dmfc2	t0, 0x025B
+	sd	t1, OCTEON_CP2_GFM_MULT+8(a0)
+	sd	t2, OCTEON_CP2_GFM_POLY(a0)
+	sd	t3, OCTEON_CP2_GFM_RESULT(a0)
+	sd	t0, OCTEON_CP2_GFM_RESULT+8(a0)
+	jr	ra
+
+2:      /* pass 1 special stuff when !CvmCtl[NOCRYPTO] */
+	dmfc2	t3, 0x0040
+	dmfc2	t0, 0x0041
+	dmfc2	t1, 0x0042
+	dmfc2	t2, 0x0043
+	sd	t3, OCTEON_CP2_HSH_DATW(a0)
+	dmfc2	t3, 0x0044
+	sd	t0, OCTEON_CP2_HSH_DATW+8(a0)
+	dmfc2	t0, 0x0045
+	sd	t1, OCTEON_CP2_HSH_DATW+16(a0)
+	dmfc2	t1, 0x0046
+	sd	t2, OCTEON_CP2_HSH_DATW+24(a0)
+	dmfc2	t2, 0x0048
+	sd	t3, OCTEON_CP2_HSH_DATW+32(a0)
+	dmfc2	t3, 0x0049
+	sd	t0, OCTEON_CP2_HSH_DATW+40(a0)
+	dmfc2	t0, 0x004A
+	sd	t1, OCTEON_CP2_HSH_DATW+48(a0)
+	sd	t2, OCTEON_CP2_HSH_IVW(a0)
+	sd	t3, OCTEON_CP2_HSH_IVW+8(a0)
+	sd	t0, OCTEON_CP2_HSH_IVW+16(a0)
+
+3:      /* pass 1 or CvmCtl[NOCRYPTO] set */
+	jr	ra
+	END(octeon_cop2_save)
+
+/*
+ * void octeon_cop2_restore(struct octeon_cop2_state *a0)
+ */
+	.align	7
+	.set push
+	.set noreorder
+	LEAF(octeon_cop2_restore)
+        /* First cache line was prefetched before the call */
+        pref    4,  128(a0)
+	dmfc0	t9, $9,7	/* CvmCtl register. */
+
+        pref    4,  256(a0)
+	ld	t0, OCTEON_CP2_CRC_IV(a0)
+        pref    4,  384(a0)
+	ld	t1, OCTEON_CP2_CRC_LENGTH(a0)
+	ld	t2, OCTEON_CP2_CRC_POLY(a0)
+
+	/* Restore the COP2 CRC state */
+	dmtc2	t0, 0x0201
+	dmtc2 	t1, 0x1202
+	bbit1	t9, 28, 2f	/* Skip LLM if CvmCtl[NODFA_CP2] is set */
+	 dmtc2	t2, 0x4200
+
+	/* Restore the LLM state */
+	ld	t0, OCTEON_CP2_LLM_DAT(a0)
+	ld	t1, OCTEON_CP2_LLM_DAT+8(a0)
+	dmtc2	t0, 0x0402
+	dmtc2	t1, 0x040A
+
+2:
+	bbit1	t9, 26, done_restore	/* done if CvmCtl[NOCRYPTO] set */
+	 nop
+
+	/* Restore the COP2 crypto state common to pass 1 and pass 2 */
+	ld	t0, OCTEON_CP2_3DES_IV(a0)
+	ld	t1, OCTEON_CP2_3DES_KEY(a0)
+	ld	t2, OCTEON_CP2_3DES_KEY+8(a0)
+	dmtc2 	t0, 0x0084
+	ld	t0, OCTEON_CP2_3DES_KEY+16(a0)
+	dmtc2 	t1, 0x0080
+	ld	t1, OCTEON_CP2_3DES_RESULT(a0)
+	dmtc2 	t2, 0x0081
+	ld	t2, OCTEON_CP2_AES_INP0(a0) /* only really needed for pass 1 */
+	dmtc2	t0, 0x0082
+	ld	t0, OCTEON_CP2_AES_IV(a0)
+	dmtc2 	t1, 0x0098
+	ld	t1, OCTEON_CP2_AES_IV+8(a0)
+	dmtc2 	t2, 0x010A                  /* only really needed for pass 1 */
+	ld	t2, OCTEON_CP2_AES_KEY(a0)
+	dmtc2 	t0, 0x0102
+	ld	t0, OCTEON_CP2_AES_KEY+8(a0)
+	dmtc2	t1, 0x0103
+	ld	t1, OCTEON_CP2_AES_KEY+16(a0)
+	dmtc2	t2, 0x0104
+	ld	t2, OCTEON_CP2_AES_KEY+24(a0)
+	dmtc2	t0, 0x0105
+	ld	t0, OCTEON_CP2_AES_KEYLEN(a0)
+	dmtc2	t1, 0x0106
+	ld	t1, OCTEON_CP2_AES_RESULT(a0)
+	dmtc2	t2, 0x0107
+	ld	t2, OCTEON_CP2_AES_RESULT+8(a0)
+	mfc0	t3, $15,0 	/* Get the processor ID register */
+	dmtc2	t0, 0x0110
+	li	t0, 0x000d0000	/* This is the processor ID of Octeon Pass1 */
+	dmtc2	t1, 0x0100
+	bne	t0, t3, 3f	/* Skip the next stuff for non-pass1 */
+	 dmtc2	t2, 0x0101
+
+        /* this code is specific for pass 1 */
+	ld	t0, OCTEON_CP2_HSH_DATW(a0)
+	ld	t1, OCTEON_CP2_HSH_DATW+8(a0)
+	ld	t2, OCTEON_CP2_HSH_DATW+16(a0)
+	dmtc2	t0, 0x0040
+	ld	t0, OCTEON_CP2_HSH_DATW+24(a0)
+	dmtc2	t1, 0x0041
+	ld	t1, OCTEON_CP2_HSH_DATW+32(a0)
+	dmtc2	t2, 0x0042
+	ld	t2, OCTEON_CP2_HSH_DATW+40(a0)
+	dmtc2	t0, 0x0043
+	ld	t0, OCTEON_CP2_HSH_DATW+48(a0)
+	dmtc2	t1, 0x0044
+	ld	t1, OCTEON_CP2_HSH_IVW(a0)
+	dmtc2	t2, 0x0045
+	ld	t2, OCTEON_CP2_HSH_IVW+8(a0)
+	dmtc2	t0, 0x0046
+	ld	t0, OCTEON_CP2_HSH_IVW+16(a0)
+	dmtc2	t1, 0x0048
+	dmtc2	t2, 0x0049
+        b done_restore   /* unconditional branch */
+	 dmtc2	t0, 0x004A
+
+3:      /* this is post-pass1 code */
+	ld	t2, OCTEON_CP2_HSH_DATW(a0)
+	ld	t0, OCTEON_CP2_HSH_DATW+8(a0)
+	ld	t1, OCTEON_CP2_HSH_DATW+16(a0)
+	dmtc2	t2, 0x0240
+	ld	t2, OCTEON_CP2_HSH_DATW+24(a0)
+	dmtc2	t0, 0x0241
+	ld	t0, OCTEON_CP2_HSH_DATW+32(a0)
+	dmtc2	t1, 0x0242
+	ld	t1, OCTEON_CP2_HSH_DATW+40(a0)
+	dmtc2	t2, 0x0243
+	ld	t2, OCTEON_CP2_HSH_DATW+48(a0)
+	dmtc2	t0, 0x0244
+	ld	t0, OCTEON_CP2_HSH_DATW+56(a0)
+	dmtc2	t1, 0x0245
+	ld	t1, OCTEON_CP2_HSH_DATW+64(a0)
+	dmtc2	t2, 0x0246
+	ld	t2, OCTEON_CP2_HSH_DATW+72(a0)
+	dmtc2	t0, 0x0247
+	ld	t0, OCTEON_CP2_HSH_DATW+80(a0)
+	dmtc2	t1, 0x0248
+	ld	t1, OCTEON_CP2_HSH_DATW+88(a0)
+	dmtc2	t2, 0x0249
+	ld	t2, OCTEON_CP2_HSH_DATW+96(a0)
+	dmtc2	t0, 0x024A
+	ld	t0, OCTEON_CP2_HSH_DATW+104(a0)
+	dmtc2	t1, 0x024B
+	ld	t1, OCTEON_CP2_HSH_DATW+112(a0)
+	dmtc2	t2, 0x024C
+	ld	t2, OCTEON_CP2_HSH_IVW(a0)
+	dmtc2	t0, 0x024D
+	ld	t0, OCTEON_CP2_HSH_IVW+8(a0)
+	dmtc2	t1, 0x024E
+	ld	t1, OCTEON_CP2_HSH_IVW+16(a0)
+	dmtc2	t2, 0x0250
+	ld	t2, OCTEON_CP2_HSH_IVW+24(a0)
+	dmtc2	t0, 0x0251
+	ld	t0, OCTEON_CP2_HSH_IVW+32(a0)
+	dmtc2	t1, 0x0252
+	ld	t1, OCTEON_CP2_HSH_IVW+40(a0)
+	dmtc2	t2, 0x0253
+	ld	t2, OCTEON_CP2_HSH_IVW+48(a0)
+	dmtc2	t0, 0x0254
+	ld	t0, OCTEON_CP2_HSH_IVW+56(a0)
+	dmtc2	t1, 0x0255
+	ld	t1, OCTEON_CP2_GFM_MULT(a0)
+	dmtc2	t2, 0x0256
+	ld	t2, OCTEON_CP2_GFM_MULT+8(a0)
+	dmtc2	t0, 0x0257
+	ld	t0, OCTEON_CP2_GFM_POLY(a0)
+	dmtc2	t1, 0x0258
+	ld	t1, OCTEON_CP2_GFM_RESULT(a0)
+	dmtc2	t2, 0x0259
+	ld	t2, OCTEON_CP2_GFM_RESULT+8(a0)
+	dmtc2	t0, 0x025E
+	dmtc2	t1, 0x025A
+	dmtc2	t2, 0x025B
+
+done_restore:
+	jr	ra
+	 nop
+	END(octeon_cop2_restore)
+	.set pop
+
+/*
+ * void octeon_mult_save()
+ * sp is assumed to point to a struct pt_regs
+ *
+ * NOTE: This is called in SAVE_SOME in stackframe.h. It can only
+ *       safely modify k0 and k1.
+ */
+	.align	7
+	.set push
+	.set noreorder
+	LEAF(octeon_mult_save)
+	dmfc0	k0, $9,7	/* CvmCtl register. */
+	bbit1	k0, 27, 1f	/* Skip CvmCtl[NOMUL] */
+	 nop
+
+	/* Save the multiplier state */
+	v3mulu	k0, $0, $0
+	v3mulu	k1, $0, $0
+	sd	k0, PT_MTP(sp)        /* PT_MTP    has P0 */
+	v3mulu	k0, $0, $0
+	sd	k1, PT_MTP+8(sp)      /* PT_MTP+8  has P1 */
+	ori	k1, $0, 1
+	v3mulu	k1, k1, $0
+	sd	k0, PT_MTP+16(sp)     /* PT_MTP+16 has P2 */
+	v3mulu	k0, $0, $0
+	sd	k1, PT_MPL(sp)        /* PT_MPL    has MPL0 */
+	v3mulu	k1, $0, $0
+	sd	k0, PT_MPL+8(sp)      /* PT_MPL+8  has MPL1 */
+	jr	ra
+	 sd	k1, PT_MPL+16(sp)     /* PT_MPL+16 has MPL2 */
+
+1:	/* Resume here if CvmCtl[NOMUL] */
+	jr	ra
+	END(octeon_mult_save)
+	.set pop
+
+/*
+ * void octeon_mult_restore()
+ * sp is assumed to point to a struct pt_regs
+ *
+ * NOTE: This is called in RESTORE_SOME in stackframe.h.
+ */
+	.align	7
+	.set push
+	.set noreorder
+	LEAF(octeon_mult_restore)
+	dmfc0	k1, $9,7		/* CvmCtl register. */
+	ld	v0, PT_MPL(sp)        	/* MPL0 */
+	ld	v1, PT_MPL+8(sp)      	/* MPL1 */
+	ld	k0, PT_MPL+16(sp)     	/* MPL2 */
+	bbit1	k1, 27, 1f		/* Skip CvmCtl[NOMUL] */
+	/* Normally falls through, so no time wasted here */
+	nop
+
+	/* Restore the multiplier state */
+	ld	k1, PT_MTP+16(sp)     	/* P2 */
+	MTM0	v0			/* MPL0 */
+	ld	v0, PT_MTP+8(sp)	/* P1 */
+	MTM1	v1			/* MPL1 */
+	ld	v1, PT_MTP(sp)   	/* P0 */
+	MTM2	k0			/* MPL2 */
+	MTP2	k1			/* P2 */
+	MTP1	v0			/* P1 */
+	jr	ra
+	 MTP0	v1			/* P0 */
+
+1:	/* Resume here if CvmCtl[NOMUL] */
+	jr	ra
+	 nop
+	END(octeon_mult_restore)
+	.set pop
+
diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c
new file mode 100644
index 00000000000..44d01a0a849
--- /dev/null
+++ b/arch/mips/mm/c-octeon.c
@@ -0,0 +1,307 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2005-2007 Cavium Networks
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/io.h>
+
+#include <asm/bcache.h>
+#include <asm/bootinfo.h>
+#include <asm/cacheops.h>
+#include <asm/cpu-features.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/r4kcache.h>
+#include <asm/system.h>
+#include <asm/mmu_context.h>
+#include <asm/war.h>
+
+#include <asm/octeon/octeon.h>
+
+unsigned long long cache_err_dcache[NR_CPUS];
+
+/**
+ * Octeon automatically flushes the dcache on tlb changes, so
+ * from Linux's viewpoint it acts much like a physically
+ * tagged cache. No flushing is needed
+ *
+ */
+static void octeon_flush_data_cache_page(unsigned long addr)
+{
+    /* Nothing to do */
+}
+
+static inline void octeon_local_flush_icache(void)
+{
+	asm volatile ("synci 0($0)");
+}
+
+/*
+ * Flush local I-cache for the specified range.
+ */
+static void local_octeon_flush_icache_range(unsigned long start,
+					    unsigned long end)
+{
+	octeon_local_flush_icache();
+}
+
+/**
+ * Flush caches as necessary for all cores affected by a
+ * vma. If no vma is supplied, all cores are flushed.
+ *
+ * @vma:    VMA to flush or NULL to flush all icaches.
+ */
+static void octeon_flush_icache_all_cores(struct vm_area_struct *vma)
+{
+	extern void octeon_send_ipi_single(int cpu, unsigned int action);
+#ifdef CONFIG_SMP
+	int cpu;
+	cpumask_t mask;
+#endif
+
+	mb();
+	octeon_local_flush_icache();
+#ifdef CONFIG_SMP
+	preempt_disable();
+	cpu = smp_processor_id();
+
+	/*
+	 * If we have a vma structure, we only need to worry about
+	 * cores it has been used on
+	 */
+	if (vma)
+		mask = vma->vm_mm->cpu_vm_mask;
+	else
+		mask = cpu_online_map;
+	cpu_clear(cpu, mask);
+	for_each_cpu_mask(cpu, mask)
+		octeon_send_ipi_single(cpu, SMP_ICACHE_FLUSH);
+
+	preempt_enable();
+#endif
+}
+
+
+/**
+ * Called to flush the icache on all cores
+ */
+static void octeon_flush_icache_all(void)
+{
+	octeon_flush_icache_all_cores(NULL);
+}
+
+
+/**
+ * Called to flush all memory associated with a memory
+ * context.
+ *
+ * @mm:     Memory context to flush
+ */
+static void octeon_flush_cache_mm(struct mm_struct *mm)
+{
+	/*
+	 * According to the R4K version of this file, CPUs without
+	 * dcache aliases don't need to do anything here
+	 */
+}
+
+
+/**
+ * Flush a range of kernel addresses out of the icache
+ *
+ */
+static void octeon_flush_icache_range(unsigned long start, unsigned long end)
+{
+	octeon_flush_icache_all_cores(NULL);
+}
+
+
+/**
+ * Flush the icache for a trampoline. These are used for interrupt
+ * and exception hooking.
+ *
+ * @addr:   Address to flush
+ */
+static void octeon_flush_cache_sigtramp(unsigned long addr)
+{
+	struct vm_area_struct *vma;
+
+	vma = find_vma(current->mm, addr);
+	octeon_flush_icache_all_cores(vma);
+}
+
+
+/**
+ * Flush a range out of a vma
+ *
+ * @vma:    VMA to flush
+ * @start:
+ * @end:
+ */
+static void octeon_flush_cache_range(struct vm_area_struct *vma,
+				     unsigned long start, unsigned long end)
+{
+	if (vma->vm_flags & VM_EXEC)
+		octeon_flush_icache_all_cores(vma);
+}
+
+
+/**
+ * Flush a specific page of a vma
+ *
+ * @vma:    VMA to flush page for
+ * @page:   Page to flush
+ * @pfn:
+ */
+static void octeon_flush_cache_page(struct vm_area_struct *vma,
+				    unsigned long page, unsigned long pfn)
+{
+	if (vma->vm_flags & VM_EXEC)
+		octeon_flush_icache_all_cores(vma);
+}
+
+
+/**
+ * Probe Octeon's caches
+ *
+ */
+static void __devinit probe_octeon(void)
+{
+	unsigned long icache_size;
+	unsigned long dcache_size;
+	unsigned int config1;
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	switch (c->cputype) {
+	case CPU_CAVIUM_OCTEON:
+		config1 = read_c0_config1();
+		c->icache.linesz = 2 << ((config1 >> 19) & 7);
+		c->icache.sets = 64 << ((config1 >> 22) & 7);
+		c->icache.ways = 1 + ((config1 >> 16) & 7);
+		c->icache.flags |= MIPS_CACHE_VTAG;
+		icache_size =
+			c->icache.sets * c->icache.ways * c->icache.linesz;
+		c->icache.waybit = ffs(icache_size / c->icache.ways) - 1;
+		c->dcache.linesz = 128;
+		if (OCTEON_IS_MODEL(OCTEON_CN3XXX))
+			c->dcache.sets = 1; /* CN3XXX has one Dcache set */
+		else
+			c->dcache.sets = 2; /* CN5XXX has two Dcache sets */
+		c->dcache.ways = 64;
+		dcache_size =
+			c->dcache.sets * c->dcache.ways * c->dcache.linesz;
+		c->dcache.waybit = ffs(dcache_size / c->dcache.ways) - 1;
+		c->options |= MIPS_CPU_PREFETCH;
+		break;
+
+	default:
+		panic("Unsupported Cavium Networks CPU type\n");
+		break;
+	}
+
+	/* compute a couple of other cache variables */
+	c->icache.waysize = icache_size / c->icache.ways;
+	c->dcache.waysize = dcache_size / c->dcache.ways;
+
+	c->icache.sets = icache_size / (c->icache.linesz * c->icache.ways);
+	c->dcache.sets = dcache_size / (c->dcache.linesz * c->dcache.ways);
+
+	if (smp_processor_id() == 0) {
+		pr_notice("Primary instruction cache %ldkB, %s, %d way, "
+			  "%d sets, linesize %d bytes.\n",
+			  icache_size >> 10,
+			  cpu_has_vtag_icache ?
+				"virtually tagged" : "physically tagged",
+			  c->icache.ways, c->icache.sets, c->icache.linesz);
+
+		pr_notice("Primary data cache %ldkB, %d-way, %d sets, "
+			  "linesize %d bytes.\n",
+			  dcache_size >> 10, c->dcache.ways,
+			  c->dcache.sets, c->dcache.linesz);
+	}
+}
+
+
+/**
+ * Setup the Octeon cache flush routines
+ *
+ */
+void __devinit octeon_cache_init(void)
+{
+	extern unsigned long ebase;
+	extern char except_vec2_octeon;
+
+	memcpy((void *)(ebase + 0x100), &except_vec2_octeon, 0x80);
+	octeon_flush_cache_sigtramp(ebase + 0x100);
+
+	probe_octeon();
+
+	shm_align_mask = PAGE_SIZE - 1;
+
+	flush_cache_all			= octeon_flush_icache_all;
+	__flush_cache_all		= octeon_flush_icache_all;
+	flush_cache_mm			= octeon_flush_cache_mm;
+	flush_cache_page		= octeon_flush_cache_page;
+	flush_cache_range		= octeon_flush_cache_range;
+	flush_cache_sigtramp		= octeon_flush_cache_sigtramp;
+	flush_icache_all		= octeon_flush_icache_all;
+	flush_data_cache_page		= octeon_flush_data_cache_page;
+	flush_icache_range		= octeon_flush_icache_range;
+	local_flush_icache_range	= local_octeon_flush_icache_range;
+
+	build_clear_page();
+	build_copy_page();
+}
+
+/**
+ * Handle a cache error exception
+ */
+
+static void  cache_parity_error_octeon(int non_recoverable)
+{
+	unsigned long coreid = cvmx_get_core_num();
+	uint64_t icache_err = read_octeon_c0_icacheerr();
+
+	pr_err("Cache error exception:\n");
+	pr_err("cp0_errorepc == %lx\n", read_c0_errorepc());
+	if (icache_err & 1) {
+		pr_err("CacheErr (Icache) == %llx\n",
+		       (unsigned long long)icache_err);
+		write_octeon_c0_icacheerr(0);
+	}
+	if (cache_err_dcache[coreid] & 1) {
+		pr_err("CacheErr (Dcache) == %llx\n",
+		       (unsigned long long)cache_err_dcache[coreid]);
+		cache_err_dcache[coreid] = 0;
+	}
+
+	if (non_recoverable)
+		panic("Can't handle cache error: nested exception");
+}
+
+/**
+ * Called when the the exception is not recoverable
+ */
+
+asmlinkage void cache_parity_error_octeon_recoverable(void)
+{
+	cache_parity_error_octeon(0);
+}
+
+/**
+ * Called when the the exception is recoverable
+ */
+
+asmlinkage void cache_parity_error_octeon_non_recoverable(void)
+{
+	cache_parity_error_octeon(1);
+}
+
diff --git a/arch/mips/mm/cex-oct.S b/arch/mips/mm/cex-oct.S
new file mode 100644
index 00000000000..3db8553fcd3
--- /dev/null
+++ b/arch/mips/mm/cex-oct.S
@@ -0,0 +1,70 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Cavium Networks
+ * Cache error handler
+ */
+
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/stackframe.h>
+
+/*
+ * Handle cache error. Indicate to the second level handler whether
+ * the exception is recoverable.
+ */
+	LEAF(except_vec2_octeon)
+
+	.set    push
+	.set	mips64r2
+	.set	noreorder
+	.set	noat
+
+
+	/* due to an errata we need to read the COP0 CacheErr (Dcache)
+	 * before any cache/DRAM access	 */
+
+	rdhwr   k0, $0        /* get core_id */
+	PTR_LA  k1, cache_err_dcache
+	sll     k0, k0, 3
+	PTR_ADDU k1, k0, k1    /* k1 = &cache_err_dcache[core_id] */
+
+	dmfc0   k0, CP0_CACHEERR, 1
+	sd      k0, (k1)
+	dmtc0   $0, CP0_CACHEERR, 1
+
+        /* check whether this is a nested exception */
+	mfc0    k1, CP0_STATUS
+	andi    k1, k1, ST0_EXL
+	beqz    k1, 1f
+	 nop
+	j	cache_parity_error_octeon_non_recoverable
+	 nop
+
+	/* exception is recoverable */
+1:	j	handle_cache_err
+	 nop
+
+	.set    pop
+	END(except_vec2_octeon)
+
+ /* We need to jump to handle_cache_err so that the previous handler
+  * can fit within 0x80 bytes. We also move from 0xFFFFFFFFAXXXXXXX
+  * space (uncached) to the 0xFFFFFFFF8XXXXXXX space (cached).  */
+	LEAF(handle_cache_err)
+	.set    push
+        .set    noreorder
+        .set    noat
+
+	SAVE_ALL
+	KMODE
+	jal     cache_parity_error_octeon_recoverable
+	nop
+	j       ret_from_exception
+	nop
+
+	.set pop
+	END(handle_cache_err)
-- 
GitLab


From bd6d85c21a5adf24567fdb235aa8e7c8c95d5847 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:22 -0800
Subject: [PATCH 117/492] MIPS: For Cavium OCTEON handle hazards as per the
 R10000 handling.

For Cavium CPU, we treat the same as R10000, in that all hazards
are dealt with in hardware.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/hazards.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index 2de638f84c8..43baed16a10 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -42,7 +42,7 @@ ASMMACRO(_ehb,
 /*
  * TLB hazards
  */
-#if defined(CONFIG_CPU_MIPSR2)
+#if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_CPU_CAVIUM_OCTEON)
 
 /*
  * MIPSR2 defines ehb for hazard avoidance
@@ -138,7 +138,7 @@ do {									\
 		__instruction_hazard();					\
 } while (0)
 
-#elif defined(CONFIG_CPU_R10000)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
-- 
GitLab


From f9bb4cf37ad3f7dec63abc5db688dd1e9df0056c Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:23 -0800
Subject: [PATCH 118/492] MIPS: For Cavium OCTEON set hwrena and lazily restore
 CP2 state.

If on Cavium, be aware of cop2 and hwrena during do_cpu().

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/traps.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 353056110f2..f6083c6bfaa 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -47,6 +47,7 @@
 #include <asm/mmu_context.h>
 #include <asm/types.h>
 #include <asm/stacktrace.h>
+#include <asm/irq.h>
 
 extern void check_wait(void);
 extern asmlinkage void r4k_wait(void);
@@ -78,6 +79,10 @@ extern asmlinkage void handle_reserved(void);
 extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 	struct mips_fpu_struct *ctx, int has_fpu);
 
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+extern asmlinkage void octeon_cop2_restore(struct octeon_cop2_state *task);
+#endif
+
 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
 void (*board_nmi_handler_setup)(void);
@@ -860,6 +865,7 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 	unsigned int opcode;
 	unsigned int cpid;
 	int status;
+	unsigned long __maybe_unused flags;
 
 	die_if_kernel("do_cpu invoked from kernel context!", regs);
 
@@ -915,6 +921,17 @@ asmlinkage void do_cpu(struct pt_regs *regs)
 		return;
 
 	case 2:
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+		prefetch(&current->thread.cp2);
+		local_irq_save(flags);
+		KSTK_STATUS(current) |= ST0_CU2;
+		status = read_c0_status();
+		write_c0_status(status | ST0_CU2);
+		octeon_cop2_restore(&(current->thread.cp2));
+		write_c0_status(status & ~ST0_CU2);
+		local_irq_restore(flags);
+		return;
+#endif
 	case 3:
 		break;
 	}
@@ -1488,6 +1505,10 @@ void __cpuinit per_cpu_trap_init(void)
 		write_c0_hwrena(enable);
 	}
 
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	write_c0_hwrena(0xc000000f); /* Octeon has register 30 and 31 */
+#endif
+
 #ifdef CONFIG_MIPS_MT_SMTC
 	if (!secondaryTC) {
 #endif /* CONFIG_MIPS_MT_SMTC */
-- 
GitLab


From ed918c2daf9ef4c3b52f75736c3a652e5160c8ad Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:24 -0800
Subject: [PATCH 119/492] MIPS: Add Cavium OCTEON specific register definitions
 to mipsregs.h

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mipsregs.h | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 9316324d070..207d098f707 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1000,6 +1000,26 @@ do {									\
 #define read_c0_ebase()		__read_32bit_c0_register($15, 1)
 #define write_c0_ebase(val)	__write_32bit_c0_register($15, 1, val)
 
+
+/* Cavium OCTEON (cnMIPS) */
+#define read_c0_cvmcount()	__read_ulong_c0_register($9, 6)
+#define write_c0_cvmcount(val)	__write_ulong_c0_register($9, 6, val)
+
+#define read_c0_cvmctl()	__read_64bit_c0_register($9, 7)
+#define write_c0_cvmctl(val)	__write_64bit_c0_register($9, 7, val)
+
+#define read_c0_cvmmemctl()	__read_64bit_c0_register($11, 7)
+#define write_c0_cvmmemctl(val)	__write_64bit_c0_register($11, 7, val)
+/*
+ * The cacheerr registers are not standardized.  On OCTEON, they are
+ * 64 bits wide.
+ */
+#define read_octeon_c0_icacheerr()	__read_64bit_c0_register($27, 0)
+#define write_octeon_c0_icacheerr(val)	__write_64bit_c0_register($27, 0, val)
+
+#define read_octeon_c0_dcacheerr()	__read_64bit_c0_register($27, 1)
+#define write_octeon_c0_dcacheerr(val)	__write_64bit_c0_register($27, 1, val)
+
 /*
  * Macros to access the floating point coprocessor control registers
  */
-- 
GitLab


From 25c3000300163e2ebf68d94425088de35ead3d76 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:25 -0800
Subject: [PATCH 120/492] MIPS: Override assembler target architecture for
 octeon.

Gas from binutils 2.19 fails to compile some cop1 instructions with
-march=octeon.  Since the cop1 instructions are present in mips1, use
that arch instead.  This will be fixed in binutils 2.20.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/mipsregs.h | 2 ++
 arch/mips/kernel/genex.S         | 4 ++++
 2 files changed, 6 insertions(+)

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 207d098f707..0417516503f 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1028,6 +1028,8 @@ do {									\
 	__asm__ __volatile__(                                   \
 	".set\tpush\n\t"					\
 	".set\treorder\n\t"					\
+	/* gas fails to assemble cfc1 for some archs (octeon).*/ \
+	".set\tmips1\n\t"					\
         "cfc1\t%0,"STR(source)"\n\t"                            \
 	".set\tpop"						\
         : "=r" (__res));                                        \
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index 757d48f0d80..fb6f73148df 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -385,10 +385,14 @@ NESTED(nmi_handler, PT_SIZE, sp)
 	.endm
 
 	.macro	__build_clear_fpe
+	.set	push
+	/* gas fails to assemble cfc1 for some archs (octeon).*/ \
+	.set	mips1
 	cfc1	a1, fcr31
 	li	a2, ~(0x3f << 12)
 	and	a2, a1
 	ctc1	a2, fcr31
+	.set	pop
 	TRACE_IRQS_ON
 	STI
 	.endm
-- 
GitLab


From 0dd4781bca56871434507ed35d5bb8ef92077907 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:26 -0800
Subject: [PATCH 121/492] MIPS: Add Cavium OCTEON processor constants and CPU
 probe.

Add OCTEON constants to asm/cpu.h and asm/module.h.

Add probe function for Cavium OCTEON CPUs and hook it up.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/cpu.h    | 14 ++++++++++++++
 arch/mips/include/asm/module.h |  2 ++
 arch/mips/kernel/cpu-probe.c   | 25 +++++++++++++++++++++++++
 3 files changed, 41 insertions(+)

diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h
index 229a786101d..c018727c7dd 100644
--- a/arch/mips/include/asm/cpu.h
+++ b/arch/mips/include/asm/cpu.h
@@ -33,6 +33,7 @@
 #define PRID_COMP_TOSHIBA	0x070000
 #define PRID_COMP_LSI		0x080000
 #define PRID_COMP_LEXRA		0x0b0000
+#define PRID_COMP_CAVIUM	0x0d0000
 
 
 /*
@@ -113,6 +114,18 @@
 #define PRID_IMP_BCM4710	0x4000
 #define PRID_IMP_BCM3302	0x9000
 
+/*
+ * These are the PRID's for when 23:16 == PRID_COMP_CAVIUM
+ */
+
+#define PRID_IMP_CAVIUM_CN38XX 0x0000
+#define PRID_IMP_CAVIUM_CN31XX 0x0100
+#define PRID_IMP_CAVIUM_CN30XX 0x0200
+#define PRID_IMP_CAVIUM_CN58XX 0x0300
+#define PRID_IMP_CAVIUM_CN56XX 0x0400
+#define PRID_IMP_CAVIUM_CN50XX 0x0600
+#define PRID_IMP_CAVIUM_CN52XX 0x0700
+
 /*
  * Definitions for 7:0 on legacy processors
  */
@@ -203,6 +216,7 @@ enum cpu_type_enum {
 	 * MIPS64 class processors
 	 */
 	CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
+	CPU_CAVIUM_OCTEON,
 
 	CPU_LAST
 };
diff --git a/arch/mips/include/asm/module.h b/arch/mips/include/asm/module.h
index e2e09b2cd26..d94085a3eaf 100644
--- a/arch/mips/include/asm/module.h
+++ b/arch/mips/include/asm/module.h
@@ -116,6 +116,8 @@ search_module_dbetables(unsigned long addr)
 #define MODULE_PROC_FAMILY "SB1 "
 #elif defined CONFIG_CPU_LOONGSON2
 #define MODULE_PROC_FAMILY "LOONGSON2 "
+#elif defined CONFIG_CPU_CAVIUM_OCTEON
+#define MODULE_PROC_FAMILY "OCTEON "
 #else
 #error MODULE_PROC_FAMILY undefined for your processor configuration
 #endif
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index c9207b5fd92..6b3c63dd181 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -154,6 +154,7 @@ void __init check_wait(void)
 	case CPU_25KF:
 	case CPU_PR4450:
 	case CPU_BCM3302:
+	case CPU_CAVIUM_OCTEON:
 		cpu_wait = r4k_wait;
 		break;
 
@@ -875,6 +876,27 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 	}
 }
 
+static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
+{
+	decode_configs(c);
+	switch (c->processor_id & 0xff00) {
+	case PRID_IMP_CAVIUM_CN38XX:
+	case PRID_IMP_CAVIUM_CN31XX:
+	case PRID_IMP_CAVIUM_CN30XX:
+	case PRID_IMP_CAVIUM_CN58XX:
+	case PRID_IMP_CAVIUM_CN56XX:
+	case PRID_IMP_CAVIUM_CN50XX:
+	case PRID_IMP_CAVIUM_CN52XX:
+		c->cputype = CPU_CAVIUM_OCTEON;
+		__cpu_name[cpu] = "Cavium Octeon";
+		break;
+	default:
+		printk(KERN_INFO "Unknown Octeon chip!\n");
+		c->cputype = CPU_UNKNOWN;
+		break;
+	}
+}
+
 const char *__cpu_name[NR_CPUS];
 
 __cpuinit void cpu_probe(void)
@@ -909,6 +931,9 @@ __cpuinit void cpu_probe(void)
 	case PRID_COMP_NXP:
 		cpu_probe_nxp(c, cpu);
 		break;
+	case PRID_COMP_CAVIUM:
+		cpu_probe_cavium(c, cpu);
+		break;
 	}
 
 	BUG_ON(!__cpu_name[cpu]);
-- 
GitLab


From 47d979eca33f8df49bfead2d5efa23a70b413882 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:27 -0800
Subject: [PATCH 122/492] MIPS: Hook Cavium OCTEON cache init into cache.c

Follow precedent of other boards, and hook-up the CPU specific cache
init.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/cpu-features.h | 3 +++
 arch/mips/mm/cache.c                 | 6 ++++++
 2 files changed, 9 insertions(+)

diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 12d12dfe73c..a0d14f85b78 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -38,6 +38,9 @@
 #ifndef cpu_has_tx39_cache
 #define cpu_has_tx39_cache	(cpu_data[0].options & MIPS_CPU_TX39_CACHE)
 #endif
+#ifndef cpu_has_octeon_cache
+#define cpu_has_octeon_cache	0
+#endif
 #ifndef cpu_has_fpu
 #define cpu_has_fpu		(current_cpu_data.options & MIPS_CPU_FPU)
 #define raw_cpu_has_fpu		(raw_current_cpu_data.options & MIPS_CPU_FPU)
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 1eb7c71e3d6..98ad0a82c29 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -182,6 +182,12 @@ void __devinit cpu_cache_init(void)
 		tx39_cache_init();
 	}
 
+	if (cpu_has_octeon_cache) {
+		extern void __weak octeon_cache_init(void);
+
+		octeon_cache_init();
+	}
+
 	setup_protection_map();
 }
 
-- 
GitLab


From 7e69deb83c9fffe75e8ea17fb40a63375e56ac9f Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:28 -0800
Subject: [PATCH 123/492] MIPS: Hook up Cavium OCTEON in arch/mips.

Take all the OCTEON specific files that were added, and hook them into
the build system for the arch/mips.  For versions of GCC that lack
OCTEON support, override gas target architecture.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Makefile        | 16 ++++++++++++++++
 arch/mips/kernel/Makefile |  1 +
 arch/mips/lib/Makefile    |  1 +
 arch/mips/mm/Makefile     |  1 +
 4 files changed, 19 insertions(+)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 28c55f60891..0bc21207e3a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -144,6 +144,10 @@ cflags-$(CONFIG_CPU_SB1)	+= $(call cc-option,-march=sb1,-march=r5000) \
 cflags-$(CONFIG_CPU_R8000)	+= -march=r8000 -Wa,--trap
 cflags-$(CONFIG_CPU_R10000)	+= $(call cc-option,-march=r10000,-march=r8000) \
 			-Wa,--trap
+cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += $(call cc-option,-march=octeon) -Wa,--trap
+ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON))))
+cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
+endif
 
 cflags-$(CONFIG_CPU_R4000_WORKAROUNDS)	+= $(call cc-option,-mfix-r4000,)
 cflags-$(CONFIG_CPU_R4400_WORKAROUNDS)	+= $(call cc-option,-mfix-r4400,)
@@ -586,6 +590,18 @@ core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/txx9/rbtx4927/
 core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
 core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/
 
+#
+# Cavium Octeon
+#
+core-$(CONFIG_CPU_CAVIUM_OCTEON)	+= arch/mips/cavium-octeon/
+cflags-$(CONFIG_CPU_CAVIUM_OCTEON)	+= -I$(srctree)/arch/mips/include/asm/mach-cavium-octeon
+core-$(CONFIG_CPU_CAVIUM_OCTEON)	+= arch/mips/cavium-octeon/executive/
+ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
+load-$(CONFIG_CPU_CAVIUM_OCTEON)	+= 0xffffffff84100000
+else
+load-$(CONFIG_CPU_CAVIUM_OCTEON) 	+= 0xffffffff81100000
+endif
+
 cflags-y			+= -I$(srctree)/arch/mips/include/asm/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index b1372c27f13..3ab4ac971fc 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_CPU_SB1)		+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
 obj-$(CONFIG_CPU_TX49XX)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_VR41XX)	+= r4k_fpu.o r4k_switch.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= octeon_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP_UP)		+= smp-up.o
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index dbcf6511b74..c13c7ad2cda 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_SB1)		+= dump_tlb.o
 obj-$(CONFIG_CPU_TX39XX)	+= r3k_dump_tlb.o
 obj-$(CONFIG_CPU_TX49XX)	+= dump_tlb.o
 obj-$(CONFIG_CPU_VR41XX)	+= dump_tlb.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= dump_tlb.o
 
 # libgcc-style stuff needed in the kernel
 obj-y += ashldi3.o ashrdi3.o cmpdi2.o lshrdi3.o ucmpdi2.o
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 95ba32b5b72..d7ec9552229 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_CPU_SB1)		+= c-r4k.o cerr-sb1.o cex-sb1.o tlb-r4k.o
 obj-$(CONFIG_CPU_TX39XX)	+= c-tx39.o tlb-r3k.o
 obj-$(CONFIG_CPU_TX49XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_VR41XX)	+= c-r4k.o cex-gen.o tlb-r4k.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= c-octeon.o cex-oct.o tlb-r4k.o
 
 obj-$(CONFIG_IP22_CPU_SCACHE)	+= sc-ip22.o
 obj-$(CONFIG_R5000_CPU_SCACHE)  += sc-r5k.o
-- 
GitLab


From 8faca49a6731299c32b333fd6535db8d21557ce3 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:29 -0800
Subject: [PATCH 124/492] MIPS: Modify core io.h macros to account for the
 Octeon Errata Core-301.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/io.h | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 501a40b9f18..436878e4e06 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -295,6 +295,12 @@ static inline void iounmap(const volatile void __iomem *addr)
 #undef __IS_KSEG1
 }
 
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+#define war_octeon_io_reorder_wmb()  		wmb()
+#else
+#define war_octeon_io_reorder_wmb()		do { } while (0)
+#endif
+
 #define __BUILD_MEMORY_SINGLE(pfx, bwlq, type, irq)			\
 									\
 static inline void pfx##write##bwlq(type val,				\
@@ -303,6 +309,8 @@ static inline void pfx##write##bwlq(type val,				\
 	volatile type *__mem;						\
 	type __val;							\
 									\
+	war_octeon_io_reorder_wmb();					\
+									\
 	__mem = (void *)__swizzle_addr_##bwlq((unsigned long)(mem));	\
 									\
 	__val = pfx##ioswab##bwlq(__mem, val);				\
@@ -370,6 +378,8 @@ static inline void pfx##out##bwlq##p(type val, unsigned long port)	\
 	volatile type *__addr;						\
 	type __val;							\
 									\
+	war_octeon_io_reorder_wmb();					\
+									\
 	__addr = (void *)__swizzle_addr_##bwlq(mips_io_port_base + port); \
 									\
 	__val = pfx##ioswab##bwlq(__addr, val);				\
@@ -504,8 +514,12 @@ BUILDSTRING(q, u64)
 #endif
 
 
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+#define mmiowb() wmb()
+#else
 /* Depends on MIPS II instruction set */
 #define mmiowb() asm volatile ("sync" ::: "memory")
+#endif
 
 static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
 {
-- 
GitLab


From b5e00af81f298f4ba2e41325042a7ce1ec022b1d Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:30 -0800
Subject: [PATCH 125/492] MIPS: Add Cavium OCTEON cop2/cvmseg state entries to
 processor.h.

Add in the cop2 and cvmseg state info to the known proc reg
data for Cavium so that it can be tracked, saved, restored.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/processor.h | 69 +++++++++++++++++++++++++++++++
 1 file changed, 69 insertions(+)

diff --git a/arch/mips/include/asm/processor.h b/arch/mips/include/asm/processor.h
index 18ee58e3944..0f926aa0cb4 100644
--- a/arch/mips/include/asm/processor.h
+++ b/arch/mips/include/asm/processor.h
@@ -118,6 +118,60 @@ union mips_watch_reg_state {
 	struct mips3264_watch_reg_state mips3264;
 };
 
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+
+struct octeon_cop2_state {
+	/* DMFC2 rt, 0x0201 */
+	unsigned long   cop2_crc_iv;
+	/* DMFC2 rt, 0x0202 (Set with DMTC2 rt, 0x1202) */
+	unsigned long   cop2_crc_length;
+	/* DMFC2 rt, 0x0200 (set with DMTC2 rt, 0x4200) */
+	unsigned long   cop2_crc_poly;
+	/* DMFC2 rt, 0x0402; DMFC2 rt, 0x040A */
+	unsigned long   cop2_llm_dat[2];
+       /* DMFC2 rt, 0x0084 */
+	unsigned long   cop2_3des_iv;
+	/* DMFC2 rt, 0x0080; DMFC2 rt, 0x0081; DMFC2 rt, 0x0082 */
+	unsigned long   cop2_3des_key[3];
+	/* DMFC2 rt, 0x0088 (Set with DMTC2 rt, 0x0098) */
+	unsigned long   cop2_3des_result;
+	/* DMFC2 rt, 0x0111 (FIXME: Read Pass1 Errata) */
+	unsigned long   cop2_aes_inp0;
+	/* DMFC2 rt, 0x0102; DMFC2 rt, 0x0103 */
+	unsigned long   cop2_aes_iv[2];
+	/* DMFC2 rt, 0x0104; DMFC2 rt, 0x0105; DMFC2 rt, 0x0106; DMFC2
+	 * rt, 0x0107 */
+	unsigned long   cop2_aes_key[4];
+	/* DMFC2 rt, 0x0110 */
+	unsigned long   cop2_aes_keylen;
+	/* DMFC2 rt, 0x0100; DMFC2 rt, 0x0101 */
+	unsigned long   cop2_aes_result[2];
+	/* DMFC2 rt, 0x0240; DMFC2 rt, 0x0241; DMFC2 rt, 0x0242; DMFC2
+	 * rt, 0x0243; DMFC2 rt, 0x0244; DMFC2 rt, 0x0245; DMFC2 rt,
+	 * 0x0246; DMFC2 rt, 0x0247; DMFC2 rt, 0x0248; DMFC2 rt,
+	 * 0x0249; DMFC2 rt, 0x024A; DMFC2 rt, 0x024B; DMFC2 rt,
+	 * 0x024C; DMFC2 rt, 0x024D; DMFC2 rt, 0x024E - Pass2 */
+	unsigned long   cop2_hsh_datw[15];
+	/* DMFC2 rt, 0x0250; DMFC2 rt, 0x0251; DMFC2 rt, 0x0252; DMFC2
+	 * rt, 0x0253; DMFC2 rt, 0x0254; DMFC2 rt, 0x0255; DMFC2 rt,
+	 * 0x0256; DMFC2 rt, 0x0257 - Pass2 */
+	unsigned long   cop2_hsh_ivw[8];
+	/* DMFC2 rt, 0x0258; DMFC2 rt, 0x0259 - Pass2 */
+	unsigned long   cop2_gfm_mult[2];
+	/* DMFC2 rt, 0x025E - Pass2 */
+	unsigned long   cop2_gfm_poly;
+	/* DMFC2 rt, 0x025A; DMFC2 rt, 0x025B - Pass2 */
+	unsigned long   cop2_gfm_result[2];
+};
+#define INIT_OCTEON_COP2 {0,}
+
+struct octeon_cvmseg_state {
+	unsigned long cvmseg[CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE]
+			    [cpu_dcache_line_size() / sizeof(unsigned long)];
+};
+
+#endif
+
 typedef struct {
 	unsigned long seg;
 } mm_segment_t;
@@ -160,6 +214,10 @@ struct thread_struct {
 	unsigned long trap_no;
 	unsigned long irix_trampoline;  /* Wheee... */
 	unsigned long irix_oldctx;
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+    struct octeon_cop2_state cp2 __attribute__ ((__aligned__(128)));
+    struct octeon_cvmseg_state cvmseg __attribute__ ((__aligned__(128)));
+#endif
 	struct mips_abi *abi;
 };
 
@@ -171,6 +229,13 @@ struct thread_struct {
 #define FPAFF_INIT
 #endif /* CONFIG_MIPS_MT_FPAFF */
 
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+#define OCTEON_INIT						\
+	.cp2			= INIT_OCTEON_COP2,
+#else
+#define OCTEON_INIT
+#endif /* CONFIG_CPU_CAVIUM_OCTEON */
+
 #define INIT_THREAD  {						\
         /*							\
          * Saved main processor registers			\
@@ -221,6 +286,10 @@ struct thread_struct {
 	.trap_no		= 0,				\
 	.irix_trampoline	= 0,				\
 	.irix_oldctx		= 0,				\
+	/*							\
+	 * Cavium Octeon specifics (null if not Octeon)		\
+	 */							\
+	OCTEON_INIT						\
 }
 
 struct task_struct;
-- 
GitLab


From babed555695fad25820fb5fb0b5068c56e375900 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:31 -0800
Subject: [PATCH 126/492] MIPS: Add Cavium OCTEON specific registers to
 ptrace.h and asm-offsets.c

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/ptrace.h |  4 ++++
 arch/mips/kernel/asm-offsets.c | 31 +++++++++++++++++++++++++++++++
 2 files changed, 35 insertions(+)

diff --git a/arch/mips/include/asm/ptrace.h b/arch/mips/include/asm/ptrace.h
index c2c8bac4330..1f30d16d466 100644
--- a/arch/mips/include/asm/ptrace.h
+++ b/arch/mips/include/asm/ptrace.h
@@ -48,6 +48,10 @@ struct pt_regs {
 #ifdef CONFIG_MIPS_MT_SMTC
 	unsigned long cp0_tcstatus;
 #endif /* CONFIG_MIPS_MT_SMTC */
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	unsigned long long mpl[3];        /* MTM{0,1,2} */
+	unsigned long long mtp[3];        /* MTP{0,1,2} */
+#endif
 } __attribute__ ((aligned (8)));
 
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 72942226fcd..c901c22d7ad 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -64,6 +64,10 @@ void output_ptreg_defines(void)
 #ifdef CONFIG_MIPS_MT_SMTC
 	OFFSET(PT_TCSTATUS, pt_regs, cp0_tcstatus);
 #endif /* CONFIG_MIPS_MT_SMTC */
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	OFFSET(PT_MPL, pt_regs, mpl);
+	OFFSET(PT_MTP, pt_regs, mtp);
+#endif /* CONFIG_CPU_CAVIUM_OCTEON */
 	DEFINE(PT_SIZE, sizeof(struct pt_regs));
 	BLANK();
 }
@@ -295,3 +299,30 @@ void output_irq_cpustat_t_defines(void)
 	DEFINE(IC_IRQ_CPUSTAT_T, sizeof(irq_cpustat_t));
 	BLANK();
 }
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+void output_octeon_cop2_state_defines(void)
+{
+	COMMENT("Octeon specific octeon_cop2_state offsets.");
+	OFFSET(OCTEON_CP2_CRC_IV,	octeon_cop2_state, cop2_crc_iv);
+	OFFSET(OCTEON_CP2_CRC_LENGTH,	octeon_cop2_state, cop2_crc_length);
+	OFFSET(OCTEON_CP2_CRC_POLY,	octeon_cop2_state, cop2_crc_poly);
+	OFFSET(OCTEON_CP2_LLM_DAT,	octeon_cop2_state, cop2_llm_dat);
+	OFFSET(OCTEON_CP2_3DES_IV,	octeon_cop2_state, cop2_3des_iv);
+	OFFSET(OCTEON_CP2_3DES_KEY,	octeon_cop2_state, cop2_3des_key);
+	OFFSET(OCTEON_CP2_3DES_RESULT,	octeon_cop2_state, cop2_3des_result);
+	OFFSET(OCTEON_CP2_AES_INP0,	octeon_cop2_state, cop2_aes_inp0);
+	OFFSET(OCTEON_CP2_AES_IV,	octeon_cop2_state, cop2_aes_iv);
+	OFFSET(OCTEON_CP2_AES_KEY,	octeon_cop2_state, cop2_aes_key);
+	OFFSET(OCTEON_CP2_AES_KEYLEN,	octeon_cop2_state, cop2_aes_keylen);
+	OFFSET(OCTEON_CP2_AES_RESULT,	octeon_cop2_state, cop2_aes_result);
+	OFFSET(OCTEON_CP2_GFM_MULT,	octeon_cop2_state, cop2_gfm_mult);
+	OFFSET(OCTEON_CP2_GFM_POLY,	octeon_cop2_state, cop2_gfm_poly);
+	OFFSET(OCTEON_CP2_GFM_RESULT,	octeon_cop2_state, cop2_gfm_result);
+	OFFSET(OCTEON_CP2_HSH_DATW,	octeon_cop2_state, cop2_hsh_datw);
+	OFFSET(OCTEON_CP2_HSH_IVW,	octeon_cop2_state, cop2_hsh_ivw);
+	OFFSET(THREAD_CP2,	task_struct, thread.cp2);
+	OFFSET(THREAD_CVMSEG,	task_struct, thread.cvmseg.cvmseg);
+	BLANK();
+}
+#endif
-- 
GitLab


From ddcdb1b4a46915b70dce3af3a78582b3ca79cf76 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:32 -0800
Subject: [PATCH 127/492] MIPS: Add SMP_ICACHE_FLUSH for the Cavium CPU family.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/smp.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index 86557b5d1b3..40e5ef1d4d2 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -37,6 +37,9 @@ extern int __cpu_logical_map[NR_CPUS];
 
 #define SMP_RESCHEDULE_YOURSELF	0x1	/* XXX braindead */
 #define SMP_CALL_FUNCTION	0x2
+/* Octeon - Tell another core to flush its icache */
+#define SMP_ICACHE_FLUSH	0x4
+
 
 extern void asmlinkage smp_bootstrap(void);
 
-- 
GitLab


From 2a219b0eaa7bb9f1a7dae4e8ac5b1bf68adab289 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:33 -0800
Subject: [PATCH 128/492] MIPS: Cavium OCTEON multiplier state preservation.

For OCTEON, implement a save and restore of the multiplier state
across context switches.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/include/asm/stackframe.h | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/mips/include/asm/stackframe.h b/arch/mips/include/asm/stackframe.h
index 4c37c4e5f72..db0fa7b5aea 100644
--- a/arch/mips/include/asm/stackframe.h
+++ b/arch/mips/include/asm/stackframe.h
@@ -194,6 +194,19 @@
 		LONG_S	$31, PT_R31(sp)
 		ori	$28, sp, _THREAD_MASK
 		xori	$28, _THREAD_MASK
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+		.set    mips64
+		pref    0, 0($28)       /* Prefetch the current pointer */
+		pref    0, PT_R31(sp)   /* Prefetch the $31(ra) */
+		/* The Octeon multiplier state is affected by general multiply
+		    instructions. It must be saved before and kernel code might
+		    corrupt it */
+		jal     octeon_mult_save
+		LONG_L  v1, 0($28)  /* Load the current pointer */
+			 /* Restore $31(ra) that was changed by the jal */
+		LONG_L  ra, PT_R31(sp)
+		pref    0, 0(v1)    /* Prefetch the current thread */
+#endif
 		.set	pop
 		.endm
 
@@ -324,6 +337,10 @@
 		DVPE	5				# dvpe a1
 		jal	mips_ihb
 #endif /* CONFIG_MIPS_MT_SMTC */
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+		/* Restore the Octeon multiplier state */
+		jal	octeon_mult_restore
+#endif
 		mfc0	a0, CP0_STATUS
 		ori	a0, STATMASK
 		xori	a0, STATMASK
-- 
GitLab


From 126336f065e5d80bd2f4c3199df8a573eb0abcf7 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:34 -0800
Subject: [PATCH 129/492] MIPS:  Compute branch returns for Cavium OCTEON
 specific branch instructions.

For Cavium OCTEON, compute the return epc value for OCTEON specific
branch instructions.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/branch.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 6b5df8bfab8..0176ed015c8 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -205,6 +205,39 @@ int __compute_return_epc(struct pt_regs *regs)
 			break;
 		}
 		break;
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+	case lwc2_op: /* This is bbit0 on Octeon */
+		if ((regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt))
+		     == 0)
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+		else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+	case ldc2_op: /* This is bbit032 on Octeon */
+		if ((regs->regs[insn.i_format.rs] &
+		    (1ull<<(insn.i_format.rt+32))) == 0)
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+		else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+	case swc2_op: /* This is bbit1 on Octeon */
+		if (regs->regs[insn.i_format.rs] & (1ull<<insn.i_format.rt))
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+		else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+	case sdc2_op: /* This is bbit132 on Octeon */
+		if (regs->regs[insn.i_format.rs] &
+		    (1ull<<(insn.i_format.rt+32)))
+			epc = epc + 4 + (insn.i_format.simmediate << 2);
+		else
+			epc += 8;
+		regs->cp0_epc = epc;
+		break;
+#endif
 	}
 
 	return 0;
-- 
GitLab


From ec454d8c4fee3b2feb87e594d806c0987c5dd538 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:35 -0800
Subject: [PATCH 130/492] MIPS: Add Cavium OCTEON slot into proper tlb
 category.

Expand the case statement for build_tlb_write_entry so that it does
the right thing on Cavium CPU variants.

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Paul Gortmaker <Paul.Gortmaker@windriver.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/tlbex.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 979cf919728..42942038d0f 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -317,6 +317,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 	case CPU_BCM3302:
 	case CPU_BCM4710:
 	case CPU_LOONGSON2:
+	case CPU_CAVIUM_OCTEON:
 		if (m4kc_tlbp_war())
 			uasm_i_nop(p);
 		tlbw(p);
-- 
GitLab


From 843aef4930b9953c9ca624a990b201440304b56f Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:36 -0800
Subject: [PATCH 131/492] MIPS: Adjust the dma-common.c platform hooks.

We add a dev parameter to plat_unmap_dma_mem(), and hooks for
plat_dma_supported() and plat_extra_sync_for_device() which should be
nop changes for all existing targets.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 .../include/asm/mach-generic/dma-coherence.h  | 26 ++++++++++++++++++-
 .../include/asm/mach-ip27/dma-coherence.h     | 26 ++++++++++++++++++-
 .../include/asm/mach-ip32/dma-coherence.h     | 26 ++++++++++++++++++-
 .../include/asm/mach-jazz/dma-coherence.h     | 26 ++++++++++++++++++-
 .../include/asm/mach-lemote/dma-coherence.h   | 26 ++++++++++++++++++-
 arch/mips/mm/dma-default.c                    | 25 +++++++-----------
 6 files changed, 135 insertions(+), 20 deletions(-)

diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
index 76e04e7feb8..36c611b6c59 100644
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ b/arch/mips/include/asm/mach-generic/dma-coherence.h
@@ -28,10 +28,34 @@ static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
 	return dma_addr;
 }
 
-static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
 {
 }
 
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s,
+	 * so we can't guarantee allocations that must be
+	 * within a tighter range than GFP_DMA..
+	 */
+	if (mask < DMA_BIT_MASK(24))
+		return 0;
+
+	return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+	return;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+					 dma_addr_t dma_addr)
+{
+	return 0;
+}
+
 static inline int plat_device_is_coherent(struct device *dev)
 {
 #ifdef CONFIG_DMA_COHERENT
diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h
index ed7e6222dc1..4c21bfca10c 100644
--- a/arch/mips/include/asm/mach-ip27/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ip27/dma-coherence.h
@@ -38,10 +38,34 @@ static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
 	return dma_addr & ~(0xffUL << 56);
 }
 
-static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
 {
 }
 
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s,
+	 * so we can't guarantee allocations that must be
+	 * within a tighter range than GFP_DMA..
+	 */
+	if (mask < DMA_BIT_MASK(24))
+		return 0;
+
+	return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+	return;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+					 dma_addr_t dma_addr)
+{
+	return 0;
+}
+
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 1;		/* IP27 non-cohernet mode is unsupported */
diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h
index a5511ebb2d5..7ae40f4b1c8 100644
--- a/arch/mips/include/asm/mach-ip32/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ip32/dma-coherence.h
@@ -60,10 +60,34 @@ static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
 	return addr;
 }
 
-static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
 {
 }
 
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s,
+	 * so we can't guarantee allocations that must be
+	 * within a tighter range than GFP_DMA..
+	 */
+	if (mask < DMA_BIT_MASK(24))
+		return 0;
+
+	return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+	return;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+					 dma_addr_t dma_addr)
+{
+	return 0;
+}
+
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 0;		/* IP32 is non-cohernet */
diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h
index d66979a124a..1c7cd27efa7 100644
--- a/arch/mips/include/asm/mach-jazz/dma-coherence.h
+++ b/arch/mips/include/asm/mach-jazz/dma-coherence.h
@@ -27,11 +27,35 @@ static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
 	return vdma_log2phys(dma_addr);
 }
 
-static void plat_unmap_dma_mem(dma_addr_t dma_addr)
+static void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
 {
 	vdma_free(dma_addr);
 }
 
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s,
+	 * so we can't guarantee allocations that must be
+	 * within a tighter range than GFP_DMA..
+	 */
+	if (mask < DMA_BIT_MASK(24))
+		return 0;
+
+	return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+	return;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+					 dma_addr_t dma_addr)
+{
+	return 0;
+}
+
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 0;
diff --git a/arch/mips/include/asm/mach-lemote/dma-coherence.h b/arch/mips/include/asm/mach-lemote/dma-coherence.h
index 7e914777ebc..38fad7dfe7d 100644
--- a/arch/mips/include/asm/mach-lemote/dma-coherence.h
+++ b/arch/mips/include/asm/mach-lemote/dma-coherence.h
@@ -30,10 +30,34 @@ static inline unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr)
 	return dma_addr & 0x7fffffff;
 }
 
-static inline void plat_unmap_dma_mem(dma_addr_t dma_addr)
+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
 {
 }
 
+static inline int plat_dma_supported(struct device *dev, u64 mask)
+{
+	/*
+	 * we fall back to GFP_DMA when the mask isn't all 1s,
+	 * so we can't guarantee allocations that must be
+	 * within a tighter range than GFP_DMA..
+	 */
+	if (mask < DMA_BIT_MASK(24))
+		return 0;
+
+	return 1;
+}
+
+static inline void plat_extra_sync_for_device(struct device *dev)
+{
+	return;
+}
+
+static inline int plat_dma_mapping_error(struct device *dev,
+					 dma_addr_t dma_addr)
+{
+	return 0;
+}
+
 static inline int plat_device_is_coherent(struct device *dev)
 {
 	return 0;
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index e6708b3ad34..546e6977d4f 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -111,7 +111,7 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_noncoherent(struct device *dev, size_t size, void *vaddr,
 	dma_addr_t dma_handle)
 {
-	plat_unmap_dma_mem(dma_handle);
+	plat_unmap_dma_mem(dev, dma_handle);
 	free_pages((unsigned long) vaddr, get_order(size));
 }
 
@@ -122,7 +122,7 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
 {
 	unsigned long addr = (unsigned long) vaddr;
 
-	plat_unmap_dma_mem(dma_handle);
+	plat_unmap_dma_mem(dev, dma_handle);
 
 	if (!plat_device_is_coherent(dev))
 		addr = CAC_ADDR(addr);
@@ -173,7 +173,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		__dma_sync(dma_addr_to_virt(dma_addr), size,
 		           direction);
 
-	plat_unmap_dma_mem(dma_addr);
+	plat_unmap_dma_mem(dev, dma_addr);
 }
 
 EXPORT_SYMBOL(dma_unmap_single);
@@ -229,7 +229,7 @@ void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
 		dma_cache_wback_inv(addr, size);
 	}
 
-	plat_unmap_dma_mem(dma_address);
+	plat_unmap_dma_mem(dev, dma_address);
 }
 
 EXPORT_SYMBOL(dma_unmap_page);
@@ -249,7 +249,7 @@ void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
 			if (addr)
 				__dma_sync(addr, sg->length, direction);
 		}
-		plat_unmap_dma_mem(sg->dma_address);
+		plat_unmap_dma_mem(dev, sg->dma_address);
 	}
 }
 
@@ -275,6 +275,7 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
 {
 	BUG_ON(direction == DMA_NONE);
 
+	plat_extra_sync_for_device(dev);
 	if (!plat_device_is_coherent(dev)) {
 		unsigned long addr;
 
@@ -305,6 +306,7 @@ void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
 {
 	BUG_ON(direction == DMA_NONE);
 
+	plat_extra_sync_for_device(dev);
 	if (!plat_device_is_coherent(dev)) {
 		unsigned long addr;
 
@@ -351,22 +353,14 @@ EXPORT_SYMBOL(dma_sync_sg_for_device);
 
 int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return 0;
+	return plat_dma_mapping_error(dev, dma_addr);
 }
 
 EXPORT_SYMBOL(dma_mapping_error);
 
 int dma_supported(struct device *dev, u64 mask)
 {
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
+	return plat_dma_supported(dev, mask);
 }
 
 EXPORT_SYMBOL(dma_supported);
@@ -383,6 +377,7 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 {
 	BUG_ON(direction == DMA_NONE);
 
+	plat_extra_sync_for_device(dev);
 	if (!plat_device_is_coherent(dev))
 		__dma_sync((unsigned long)vaddr, size, direction);
 }
-- 
GitLab


From 551d9304de60229080b5bf97230728c1c1bc8260 Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:37 -0800
Subject: [PATCH 132/492] MIPS: Add defconfig for Cavium OCTEON.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/configs/cavium-octeon_defconfig | 943 ++++++++++++++++++++++
 1 file changed, 943 insertions(+)
 create mode 100644 arch/mips/configs/cavium-octeon_defconfig

diff --git a/arch/mips/configs/cavium-octeon_defconfig b/arch/mips/configs/cavium-octeon_defconfig
new file mode 100644
index 00000000000..7afaa28a376
--- /dev/null
+++ b/arch/mips/configs/cavium-octeon_defconfig
@@ -0,0 +1,943 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.28-rc6
+# Wed Dec  3 11:00:58 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MACH_EMMA is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_WR_PPMC is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD=y
+CONFIG_CAVIUM_OCTEON_SPECIFIC_OPTIONS=y
+# CONFIG_CAVIUM_OCTEON_2ND_KERNEL is not set
+CONFIG_CAVIUM_OCTEON_HW_FIX_UNALIGNED=y
+CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE=2
+CONFIG_CAVIUM_OCTEON_LOCK_L2=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT=y
+CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_COHERENT=y
+# CONFIG_EARLY_PRINTK is not set
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_CPU_OCTEON=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=7
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_CAVIUM_OCTEON=y
+CONFIG_WEAK_ORDERING=y
+CONFIG_WEAK_REORDERING_BEYOND_LLSC=y
+CONFIG_CPU_MIPSR2=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+# CONFIG_32BIT is not set
+CONFIG_64BIT=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_SYS_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_SMP=y
+CONFIG_SYS_SUPPORTS_SMP=y
+CONFIG_NR_CPUS_DEFAULT_16=y
+CONFIG_NR_CPUS=16
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_KEXEC is not set
+CONFIG_SECCOMP=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_FREEZER is not set
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MIPS32_COMPAT=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_BINFMT_ELF32=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+CONFIG_FIB_RULES=y
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+CONFIG_STAGING_EXCLUDE_BUILD=y
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_CMDLINE=""
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_RUNTIME_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
GitLab


From a86c7f72454c4e855d5d6c80ed9f7f2ac55b001a Mon Sep 17 00:00:00 2001
From: David Daney <ddaney@caviumnetworks.com>
Date: Thu, 11 Dec 2008 15:33:38 -0800
Subject: [PATCH 133/492] MIPS: Add Cavium OCTEON to arch/mips/Kconfig

Signed-off-by: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig | 63 +++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 61 insertions(+), 2 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index a5255e7c79e..424ff744d07 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -595,6 +595,44 @@ config WR_PPMC
 	  This enables support for the Wind River MIPS32 4KC PPMC evaluation
 	  board, which is based on GT64120 bridge chip.
 
+config CAVIUM_OCTEON_SIMULATOR
+	bool "Support for the Cavium Networks Octeon Simulator"
+	select CEVT_R4K
+	select 64BIT_PHYS_ADDR
+	select DMA_COHERENT
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select CPU_CAVIUM_OCTEON
+	help
+	  The Octeon simulator is software performance model of the Cavium
+	  Octeon Processor. It supports simulating Octeon processors on x86
+	  hardware.
+
+config CAVIUM_OCTEON_REFERENCE_BOARD
+	bool "Support for the Cavium Networks Octeon reference board"
+	select CEVT_R4K
+	select 64BIT_PHYS_ADDR
+	select DMA_COHERENT
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_EARLY_PRINTK
+	select CPU_CAVIUM_OCTEON
+	select SWAP_IO_SPACE
+	help
+	  This option supports all of the Octeon reference boards from Cavium
+	  Networks. It builds a kernel that dynamically determines the Octeon
+	  CPU type and supports all known board reference implementations.
+	  Some of the supported boards are:
+		EBT3000
+		EBH3000
+		EBH3100
+		Thunder
+		Kodama
+		Hikari
+	  Say Y here for most Octeon reference boards.
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
@@ -607,6 +645,7 @@ source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
 source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
+source "arch/mips/cavium-octeon/Kconfig"
 
 endmenu
 
@@ -835,6 +874,9 @@ config IRQ_GT641XX
 config IRQ_GIC
 	bool
 
+config IRQ_CPU_OCTEON
+	bool
+
 config MIPS_BOARDS_GEN
 	bool
 
@@ -924,7 +966,7 @@ config BOOT_ELF32
 config MIPS_L1_CACHE_SHIFT
 	int
 	default "4" if MACH_DECSTATION || MIKROTIK_RB532
-	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
+	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
 	default "4" if PMC_MSP4200_EVAL
 	default "5"
 
@@ -1185,6 +1227,23 @@ config CPU_SB1
 	select CPU_SUPPORTS_HIGHMEM
 	select WEAK_ORDERING
 
+config CPU_CAVIUM_OCTEON
+	bool "Cavium Octeon processor"
+	select IRQ_CPU
+	select IRQ_CPU_OCTEON
+	select CPU_HAS_PREFETCH
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_SMP
+	select NR_CPUS_DEFAULT_16
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	select CPU_SUPPORTS_HIGHMEM
+	help
+	  The Cavium Octeon processor is a highly integrated chip containing
+	  many ethernet hardware widgets for networking tasks. The processor
+	  can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
+	  Full details can be found at http://www.caviumnetworks.com.
+
 endchoice
 
 config SYS_HAS_CPU_LOONGSON2
@@ -1285,7 +1344,7 @@ config CPU_MIPSR1
 
 config CPU_MIPSR2
 	bool
-	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2
+	default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
 
 config SYS_SUPPORTS_32BIT_KERNEL
 	bool
-- 
GitLab


From 58e75e86cf9af1130b3c628d924e6df0bc72832f Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:14 +0100
Subject: [PATCH 134/492] MIPS: Alchemy: Move development board code to common
 subdirectory

This should ease sharing of common devboard code.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Makefile                            | 24 +++++++++----------
 arch/mips/alchemy/devboards/Makefile          | 16 +++++++++++++
 .../alchemy/{ => devboards}/db1x00/Makefile   |  0
 .../{ => devboards}/db1x00/board_setup.c      |  0
 .../alchemy/{ => devboards}/db1x00/init.c     |  0
 .../alchemy/{ => devboards}/db1x00/irqmap.c   |  0
 .../alchemy/{ => devboards}/pb1000/Makefile   |  0
 .../{ => devboards}/pb1000/board_setup.c      |  0
 .../alchemy/{ => devboards}/pb1000/init.c     |  0
 .../alchemy/{ => devboards}/pb1000/irqmap.c   |  0
 .../alchemy/{ => devboards}/pb1100/Makefile   |  0
 .../{ => devboards}/pb1100/board_setup.c      |  0
 .../alchemy/{ => devboards}/pb1100/init.c     |  0
 .../alchemy/{ => devboards}/pb1100/irqmap.c   |  0
 .../alchemy/{ => devboards}/pb1200/Makefile   |  0
 .../{ => devboards}/pb1200/board_setup.c      |  0
 .../alchemy/{ => devboards}/pb1200/init.c     |  0
 .../alchemy/{ => devboards}/pb1200/irqmap.c   |  0
 .../alchemy/{ => devboards}/pb1200/platform.c |  0
 .../alchemy/{ => devboards}/pb1500/Makefile   |  0
 .../{ => devboards}/pb1500/board_setup.c      |  0
 .../alchemy/{ => devboards}/pb1500/init.c     |  0
 .../alchemy/{ => devboards}/pb1500/irqmap.c   |  0
 .../alchemy/{ => devboards}/pb1550/Makefile   |  0
 .../{ => devboards}/pb1550/board_setup.c      |  0
 .../alchemy/{ => devboards}/pb1550/init.c     |  0
 .../alchemy/{ => devboards}/pb1550/irqmap.c   |  0
 27 files changed, 28 insertions(+), 12 deletions(-)
 create mode 100644 arch/mips/alchemy/devboards/Makefile
 rename arch/mips/alchemy/{ => devboards}/db1x00/Makefile (100%)
 rename arch/mips/alchemy/{ => devboards}/db1x00/board_setup.c (100%)
 rename arch/mips/alchemy/{ => devboards}/db1x00/init.c (100%)
 rename arch/mips/alchemy/{ => devboards}/db1x00/irqmap.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1000/Makefile (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1000/board_setup.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1000/init.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1000/irqmap.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1100/Makefile (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1100/board_setup.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1100/init.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1100/irqmap.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1200/Makefile (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1200/board_setup.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1200/init.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1200/irqmap.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1200/platform.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1500/Makefile (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1500/board_setup.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1500/init.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1500/irqmap.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1550/Makefile (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1550/board_setup.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1550/init.c (100%)
 rename arch/mips/alchemy/{ => devboards}/pb1550/irqmap.c (100%)

diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 0bc21207e3a..21b00e95dae 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -188,84 +188,84 @@ cflags-$(CONFIG_SOC_AU1X00)	+= -I$(srctree)/arch/mips/include/asm/mach-au1x00
 #
 # AMD Alchemy Pb1000 eval board
 #
-libs-$(CONFIG_MIPS_PB1000)	+= arch/mips/alchemy/pb1000/
+core-$(CONFIG_MIPS_PB1000)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_PB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1000)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1100 eval board
 #
-libs-$(CONFIG_MIPS_PB1100)	+= arch/mips/alchemy/pb1100/
+core-$(CONFIG_MIPS_PB1100)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_PB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1100)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1500 eval board
 #
-libs-$(CONFIG_MIPS_PB1500)	+= arch/mips/alchemy/pb1500/
+core-$(CONFIG_MIPS_PB1500)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_PB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1500)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1550 eval board
 #
-libs-$(CONFIG_MIPS_PB1550)	+= arch/mips/alchemy/pb1550/
+core-$(CONFIG_MIPS_PB1550)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_PB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1550)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Pb1200 eval board
 #
-libs-$(CONFIG_MIPS_PB1200)	+= arch/mips/alchemy/pb1200/
+core-$(CONFIG_MIPS_PB1200)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_PB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-pb1x00
 load-$(CONFIG_MIPS_PB1200)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Db1000 eval board
 #
-libs-$(CONFIG_MIPS_DB1000)	+= arch/mips/alchemy/db1x00/
+core-$(CONFIG_MIPS_DB1000)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_DB1000)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1000)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Db1100 eval board
 #
-libs-$(CONFIG_MIPS_DB1100)	+= arch/mips/alchemy/db1x00/
+core-$(CONFIG_MIPS_DB1100)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_DB1100)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1100)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Db1500 eval board
 #
-libs-$(CONFIG_MIPS_DB1500)	+= arch/mips/alchemy/db1x00/
+core-$(CONFIG_MIPS_DB1500)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_DB1500)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1500)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Db1550 eval board
 #
-libs-$(CONFIG_MIPS_DB1550)	+= arch/mips/alchemy/db1x00/
+core-$(CONFIG_MIPS_DB1550)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_DB1550)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1550)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Db1200 eval board
 #
-libs-$(CONFIG_MIPS_DB1200)	+= arch/mips/alchemy/pb1200/
+core-$(CONFIG_MIPS_DB1200)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_DB1200)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Bosporus eval board
 #
-libs-$(CONFIG_MIPS_BOSPORUS)	+= arch/mips/alchemy/db1x00/
+core-$(CONFIG_MIPS_BOSPORUS)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_BOSPORUS)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_BOSPORUS)	+= 0xffffffff80100000
 
 #
 # AMD Alchemy Mirage eval board
 #
-libs-$(CONFIG_MIPS_MIRAGE)	+= arch/mips/alchemy/db1x00/
+core-$(CONFIG_MIPS_MIRAGE)	+= arch/mips/alchemy/devboards/
 cflags-$(CONFIG_MIPS_MIRAGE)	+= -I$(srctree)/arch/mips/include/asm/mach-db1x00
 load-$(CONFIG_MIPS_MIRAGE)	+= 0xffffffff80100000
 
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
new file mode 100644
index 00000000000..a98126bf147
--- /dev/null
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -0,0 +1,16 @@
+#
+# Alchemy Develboards
+#
+
+obj-$(CONFIG_MIPS_PB1000)	+= pb1000/
+obj-$(CONFIG_MIPS_PB1100)	+= pb1100/
+obj-$(CONFIG_MIPS_PB1200)	+= pb1200/
+obj-$(CONFIG_MIPS_PB1500)	+= pb1500/
+obj-$(CONFIG_MIPS_PB1550)	+= pb1550/
+obj-$(CONFIG_MIPS_DB1000)	+= db1x00/
+obj-$(CONFIG_MIPS_DB1100)	+= db1x00/
+obj-$(CONFIG_MIPS_DB1200)	+= pb1200/
+obj-$(CONFIG_MIPS_DB1500)	+= db1x00/
+obj-$(CONFIG_MIPS_DB1550)	+= db1x00/
+obj-$(CONFIG_MIPS_BOSPORUS)	+= db1x00/
+obj-$(CONFIG_MIPS_MIRAGE)	+= db1x00/
diff --git a/arch/mips/alchemy/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile
similarity index 100%
rename from arch/mips/alchemy/db1x00/Makefile
rename to arch/mips/alchemy/devboards/db1x00/Makefile
diff --git a/arch/mips/alchemy/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
similarity index 100%
rename from arch/mips/alchemy/db1x00/board_setup.c
rename to arch/mips/alchemy/devboards/db1x00/board_setup.c
diff --git a/arch/mips/alchemy/db1x00/init.c b/arch/mips/alchemy/devboards/db1x00/init.c
similarity index 100%
rename from arch/mips/alchemy/db1x00/init.c
rename to arch/mips/alchemy/devboards/db1x00/init.c
diff --git a/arch/mips/alchemy/db1x00/irqmap.c b/arch/mips/alchemy/devboards/db1x00/irqmap.c
similarity index 100%
rename from arch/mips/alchemy/db1x00/irqmap.c
rename to arch/mips/alchemy/devboards/db1x00/irqmap.c
diff --git a/arch/mips/alchemy/pb1000/Makefile b/arch/mips/alchemy/devboards/pb1000/Makefile
similarity index 100%
rename from arch/mips/alchemy/pb1000/Makefile
rename to arch/mips/alchemy/devboards/pb1000/Makefile
diff --git a/arch/mips/alchemy/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
similarity index 100%
rename from arch/mips/alchemy/pb1000/board_setup.c
rename to arch/mips/alchemy/devboards/pb1000/board_setup.c
diff --git a/arch/mips/alchemy/pb1000/init.c b/arch/mips/alchemy/devboards/pb1000/init.c
similarity index 100%
rename from arch/mips/alchemy/pb1000/init.c
rename to arch/mips/alchemy/devboards/pb1000/init.c
diff --git a/arch/mips/alchemy/pb1000/irqmap.c b/arch/mips/alchemy/devboards/pb1000/irqmap.c
similarity index 100%
rename from arch/mips/alchemy/pb1000/irqmap.c
rename to arch/mips/alchemy/devboards/pb1000/irqmap.c
diff --git a/arch/mips/alchemy/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile
similarity index 100%
rename from arch/mips/alchemy/pb1100/Makefile
rename to arch/mips/alchemy/devboards/pb1100/Makefile
diff --git a/arch/mips/alchemy/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
similarity index 100%
rename from arch/mips/alchemy/pb1100/board_setup.c
rename to arch/mips/alchemy/devboards/pb1100/board_setup.c
diff --git a/arch/mips/alchemy/pb1100/init.c b/arch/mips/alchemy/devboards/pb1100/init.c
similarity index 100%
rename from arch/mips/alchemy/pb1100/init.c
rename to arch/mips/alchemy/devboards/pb1100/init.c
diff --git a/arch/mips/alchemy/pb1100/irqmap.c b/arch/mips/alchemy/devboards/pb1100/irqmap.c
similarity index 100%
rename from arch/mips/alchemy/pb1100/irqmap.c
rename to arch/mips/alchemy/devboards/pb1100/irqmap.c
diff --git a/arch/mips/alchemy/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile
similarity index 100%
rename from arch/mips/alchemy/pb1200/Makefile
rename to arch/mips/alchemy/devboards/pb1200/Makefile
diff --git a/arch/mips/alchemy/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
similarity index 100%
rename from arch/mips/alchemy/pb1200/board_setup.c
rename to arch/mips/alchemy/devboards/pb1200/board_setup.c
diff --git a/arch/mips/alchemy/pb1200/init.c b/arch/mips/alchemy/devboards/pb1200/init.c
similarity index 100%
rename from arch/mips/alchemy/pb1200/init.c
rename to arch/mips/alchemy/devboards/pb1200/init.c
diff --git a/arch/mips/alchemy/pb1200/irqmap.c b/arch/mips/alchemy/devboards/pb1200/irqmap.c
similarity index 100%
rename from arch/mips/alchemy/pb1200/irqmap.c
rename to arch/mips/alchemy/devboards/pb1200/irqmap.c
diff --git a/arch/mips/alchemy/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c
similarity index 100%
rename from arch/mips/alchemy/pb1200/platform.c
rename to arch/mips/alchemy/devboards/pb1200/platform.c
diff --git a/arch/mips/alchemy/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile
similarity index 100%
rename from arch/mips/alchemy/pb1500/Makefile
rename to arch/mips/alchemy/devboards/pb1500/Makefile
diff --git a/arch/mips/alchemy/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
similarity index 100%
rename from arch/mips/alchemy/pb1500/board_setup.c
rename to arch/mips/alchemy/devboards/pb1500/board_setup.c
diff --git a/arch/mips/alchemy/pb1500/init.c b/arch/mips/alchemy/devboards/pb1500/init.c
similarity index 100%
rename from arch/mips/alchemy/pb1500/init.c
rename to arch/mips/alchemy/devboards/pb1500/init.c
diff --git a/arch/mips/alchemy/pb1500/irqmap.c b/arch/mips/alchemy/devboards/pb1500/irqmap.c
similarity index 100%
rename from arch/mips/alchemy/pb1500/irqmap.c
rename to arch/mips/alchemy/devboards/pb1500/irqmap.c
diff --git a/arch/mips/alchemy/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile
similarity index 100%
rename from arch/mips/alchemy/pb1550/Makefile
rename to arch/mips/alchemy/devboards/pb1550/Makefile
diff --git a/arch/mips/alchemy/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
similarity index 100%
rename from arch/mips/alchemy/pb1550/board_setup.c
rename to arch/mips/alchemy/devboards/pb1550/board_setup.c
diff --git a/arch/mips/alchemy/pb1550/init.c b/arch/mips/alchemy/devboards/pb1550/init.c
similarity index 100%
rename from arch/mips/alchemy/pb1550/init.c
rename to arch/mips/alchemy/devboards/pb1550/init.c
diff --git a/arch/mips/alchemy/pb1550/irqmap.c b/arch/mips/alchemy/devboards/pb1550/irqmap.c
similarity index 100%
rename from arch/mips/alchemy/pb1550/irqmap.c
rename to arch/mips/alchemy/devboards/pb1550/irqmap.c
-- 
GitLab


From 23ba25d56606eec6fabc37c1efcbd48837dc9adc Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:15 +0100
Subject: [PATCH 135/492] MIPS: Alchemy: devboards: consolidate files

Share some code and merge small files:
- Extract the prom init code from all devboard files (they only differ in
  memory configuration).
- Merge the irq configuration into board setup code.
- Merge smaller files into board setup code.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/alchemy/devboards/db1x00/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1000/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1000/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1100/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1100/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1200/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1500/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1500/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1550/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1550/irqmap.c
 create mode 100644 arch/mips/alchemy/devboards/prom.c
---
 arch/mips/alchemy/devboards/Makefile          |  1 +
 arch/mips/alchemy/devboards/db1x00/Makefile   |  2 +-
 .../alchemy/devboards/db1x00/board_setup.c    |  9 +++
 arch/mips/alchemy/devboards/db1x00/init.c     | 62 -------------------
 arch/mips/alchemy/devboards/pb1000/Makefile   |  2 +-
 .../alchemy/devboards/pb1000/board_setup.c    | 17 ++++-
 arch/mips/alchemy/devboards/pb1000/init.c     | 57 -----------------
 arch/mips/alchemy/devboards/pb1000/irqmap.c   | 38 ------------
 arch/mips/alchemy/devboards/pb1100/Makefile   |  2 +-
 .../alchemy/devboards/pb1100/board_setup.c    | 16 +++++
 arch/mips/alchemy/devboards/pb1100/init.c     | 60 ------------------
 arch/mips/alchemy/devboards/pb1100/irqmap.c   | 40 ------------
 arch/mips/alchemy/devboards/pb1200/Makefile   |  3 +-
 .../alchemy/devboards/pb1200/board_setup.c    |  5 ++
 arch/mips/alchemy/devboards/pb1200/init.c     | 58 -----------------
 arch/mips/alchemy/devboards/pb1500/Makefile   |  2 +-
 .../alchemy/devboards/pb1500/board_setup.c    | 22 +++++++
 arch/mips/alchemy/devboards/pb1500/init.c     | 58 -----------------
 arch/mips/alchemy/devboards/pb1500/irqmap.c   | 46 --------------
 arch/mips/alchemy/devboards/pb1550/Makefile   |  2 +-
 .../alchemy/devboards/pb1550/board_setup.c    | 19 ++++++
 arch/mips/alchemy/devboards/pb1550/irqmap.c   | 43 -------------
 .../devboards/{pb1550/init.c => prom.c}       | 24 ++++---
 23 files changed, 107 insertions(+), 481 deletions(-)
 delete mode 100644 arch/mips/alchemy/devboards/db1x00/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1000/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1000/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1100/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1100/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1200/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1500/init.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1500/irqmap.c
 delete mode 100644 arch/mips/alchemy/devboards/pb1550/irqmap.c
 rename arch/mips/alchemy/devboards/{pb1550/init.c => prom.c} (73%)

diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
index a98126bf147..c0eb87a66fb 100644
--- a/arch/mips/alchemy/devboards/Makefile
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -2,6 +2,7 @@
 # Alchemy Develboards
 #
 
+obj-y += prom.o
 obj-$(CONFIG_MIPS_PB1000)	+= pb1000/
 obj-$(CONFIG_MIPS_PB1100)	+= pb1100/
 obj-$(CONFIG_MIPS_PB1200)	+= pb1200/
diff --git a/arch/mips/alchemy/devboards/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile
index 274db3b55d8..432241ab867 100644
--- a/arch/mips/alchemy/devboards/db1x00/Makefile
+++ b/arch/mips/alchemy/devboards/db1x00/Makefile
@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
 #
 
-lib-y := init.o board_setup.o irqmap.o
+obj-y := board_setup.o irqmap.o
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 9e5ccbbfced..427f799031b 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -34,6 +34,15 @@
 
 static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 
+const char *get_system_type(void)
+{
+#ifdef CONFIG_MIPS_BOSPORUS
+	return "Alchemy Bosporus Gateway Reference";
+#else
+	return "Alchemy Db1x00";
+#endif
+}
+
 void board_reset(void)
 {
 	/* Hit BCSR.SW_RESET[RESET] */
diff --git a/arch/mips/alchemy/devboards/db1x00/init.c b/arch/mips/alchemy/devboards/db1x00/init.c
deleted file mode 100644
index d91d334797c..00000000000
--- a/arch/mips/alchemy/devboards/db1x00/init.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	PB1000 board setup
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-#ifdef CONFIG_MIPS_BOSPORUS
-	return "Alchemy Bosporus Gateway Reference";
-#else
-	return "Alchemy Db1x00";
-#endif
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
-		memsize = 0x04000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/alchemy/devboards/pb1000/Makefile b/arch/mips/alchemy/devboards/pb1000/Makefile
index 99bbec0ca41..97c6615ba2b 100644
--- a/arch/mips/alchemy/devboards/pb1000/Makefile
+++ b/arch/mips/alchemy/devboards/pb1000/Makefile
@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor Pb1000 board.
 #
 
-lib-y := init.o board_setup.o irqmap.o
+obj-y := board_setup.o
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 25df167a95b..b75e487f53e 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -23,12 +23,25 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/init.h>
 #include <linux/delay.h>
-
+#include <linux/init.h>
+#include <linux/interrupt.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1000.h>
 
+
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+	{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
+};
+
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1000";
+}
+
 void board_reset(void)
 {
 }
diff --git a/arch/mips/alchemy/devboards/pb1000/init.c b/arch/mips/alchemy/devboards/pb1000/init.c
deleted file mode 100644
index 640055b8ac6..00000000000
--- a/arch/mips/alchemy/devboards/pb1000/init.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Pb1000 board setup
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1000";
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = (int)fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
-		memsize = 0x04000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/alchemy/devboards/pb1000/irqmap.c b/arch/mips/alchemy/devboards/pb1000/irqmap.c
deleted file mode 100644
index b3d56b0af32..00000000000
--- a/arch/mips/alchemy/devboards/pb1000/irqmap.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/alchemy/devboards/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile
index 793e97c49e4..c586dd7e91d 100644
--- a/arch/mips/alchemy/devboards/pb1100/Makefile
+++ b/arch/mips/alchemy/devboards/pb1100/Makefile
@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor Pb1100 board.
 #
 
-lib-y := init.o board_setup.o irqmap.o
+obj-y := board_setup.o
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
index c0bfd59a7a3..9daab7e2922 100644
--- a/arch/mips/alchemy/devboards/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c
@@ -29,6 +29,22 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1100.h>
 
+
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+	{ AU1000_GPIO_9,  INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
+	{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
+	{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
+	{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
+};
+
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1100";
+}
+
 void board_reset(void)
 {
 	/* Hit BCSR.RST_VDDI[SOFT_RESET] */
diff --git a/arch/mips/alchemy/devboards/pb1100/init.c b/arch/mips/alchemy/devboards/pb1100/init.c
deleted file mode 100644
index d34fbd8cc93..00000000000
--- a/arch/mips/alchemy/devboards/pb1100/init.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Pb1100 board setup
- *
- * Copyright 2002, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1100";
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg3;
-
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
-		memsize = 0x04000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
-
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/alchemy/devboards/pb1100/irqmap.c b/arch/mips/alchemy/devboards/pb1100/irqmap.c
deleted file mode 100644
index 9b7dd8b4128..00000000000
--- a/arch/mips/alchemy/devboards/pb1100/irqmap.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xx0 IRQ map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_9,  INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
-	{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
-	{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
-	{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/alchemy/devboards/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile
index d678adf7ce8..c8c3a99fb68 100644
--- a/arch/mips/alchemy/devboards/pb1200/Makefile
+++ b/arch/mips/alchemy/devboards/pb1200/Makefile
@@ -2,7 +2,6 @@
 # Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
 #
 
-lib-y := init.o board_setup.o irqmap.o
-obj-y += platform.o
+obj-y := board_setup.o irqmap.o platform.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
index 6cb2115059a..8f03dc8fdd2 100644
--- a/arch/mips/alchemy/devboards/pb1200/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c
@@ -33,6 +33,11 @@
 extern void _board_init_irq(void);
 extern void (*board_init_irq)(void);
 
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1200";
+}
+
 void board_reset(void)
 {
 	bcsr->resets = 0;
diff --git a/arch/mips/alchemy/devboards/pb1200/init.c b/arch/mips/alchemy/devboards/pb1200/init.c
deleted file mode 100644
index edd9425fa32..00000000000
--- a/arch/mips/alchemy/devboards/pb1200/init.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	PB1200 board setup
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1200";
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = (int)fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
-		memsize = 0x08000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/alchemy/devboards/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile
index 602f38df20b..173b419a747 100644
--- a/arch/mips/alchemy/devboards/pb1500/Makefile
+++ b/arch/mips/alchemy/devboards/pb1500/Makefile
@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor Pb1500 board.
 #
 
-lib-y := init.o board_setup.o irqmap.o
+obj-y := board_setup.o
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 035771c6e5b..47173f1e5ae 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -29,6 +29,28 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1500.h>
 
+
+char irq_tab_alchemy[][5] __initdata = {
+	[12] = { -1, INTA, INTX, INTX, INTX },   /* IDSEL 12 - HPT370	*/
+	[13] = { -1, INTA, INTB, INTC, INTD },   /* IDSEL 13 - PCI slot */
+};
+
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
+	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
+};
+
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1500";
+}
+
 void board_reset(void)
 {
 	/* Hit BCSR.RST_VDDI[SOFT_RESET] */
diff --git a/arch/mips/alchemy/devboards/pb1500/init.c b/arch/mips/alchemy/devboards/pb1500/init.c
deleted file mode 100644
index b73343b9dba..00000000000
--- a/arch/mips/alchemy/devboards/pb1500/init.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Pb1500 board setup
- *
- * Copyright 2001, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom.h>
-
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1500";
-}
-
-void __init prom_init(void)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = (int)fw_arg0;
-	prom_argv = (char **)fw_arg1;
-	prom_envp = (char **)fw_arg2;
-
-	prom_init_cmdline();
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str)
-		memsize = 0x04000000;
-	else
-		strict_strtoul(memsize_str, 0, &memsize);
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/alchemy/devboards/pb1500/irqmap.c b/arch/mips/alchemy/devboards/pb1500/irqmap.c
deleted file mode 100644
index 39c4682766a..00000000000
--- a/arch/mips/alchemy/devboards/pb1500/irqmap.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTA, INTX, INTX, INTX },   /* IDSEL 12 - HPT370	*/
-	[13] = { -1, INTA, INTB, INTC, INTD },   /* IDSEL 13 - PCI slot */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/alchemy/devboards/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile
index 7d8beca87fa..cff95bcdb2c 100644
--- a/arch/mips/alchemy/devboards/pb1550/Makefile
+++ b/arch/mips/alchemy/devboards/pb1550/Makefile
@@ -5,4 +5,4 @@
 # Makefile for the Alchemy Semiconductor Pb1550 board.
 #
 
-lib-y := init.o board_setup.o irqmap.o
+obj-y := board_setup.o
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index 0ed76b64b6a..25a9190265d 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -32,6 +32,25 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1550.h>
 
+
+char irq_tab_alchemy[][5] __initdata = {
+	[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
+	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
+};
+
+struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
+	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
+};
+
+int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1550";
+}
+
 void board_reset(void)
 {
 	/* Hit BCSR.SYSTEM[RESET] */
diff --git a/arch/mips/alchemy/devboards/pb1550/irqmap.c b/arch/mips/alchemy/devboards/pb1550/irqmap.c
deleted file mode 100644
index a02a4d1fa89..00000000000
--- a/arch/mips/alchemy/devboards/pb1550/irqmap.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xx0 IRQ map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-char irq_tab_alchemy[][5] __initdata = {
-	[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
-	[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
-};
-
-struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/alchemy/devboards/pb1550/init.c b/arch/mips/alchemy/devboards/prom.c
similarity index 73%
rename from arch/mips/alchemy/devboards/pb1550/init.c
rename to arch/mips/alchemy/devboards/prom.c
index 11e7f4acd48..0042bd6b1d7 100644
--- a/arch/mips/alchemy/devboards/pb1550/init.c
+++ b/arch/mips/alchemy/devboards/prom.c
@@ -1,9 +1,9 @@
 /*
+ * Common code used by all Alchemy develboards.
  *
- * BRIEF MODULE DESCRIPTION
- *	Pb1550 board setup
+ * Extracted from files which had this to say:
  *
- * Copyright 2001, 2008 MontaVista Software Inc.
+ * Copyright 2000, 2008 MontaVista Software Inc.
  * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
@@ -29,15 +29,19 @@
 
 #include <linux/init.h>
 #include <linux/kernel.h>
-
 #include <asm/bootinfo.h>
-
+#include <asm/mach-au1x00/au1000.h>
 #include <prom.h>
 
-const char *get_system_type(void)
-{
-	return "Alchemy Pb1550";
-}
+#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_DB1000) || \
+    defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || \
+    defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_DB1500) || \
+    defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
+#define ALCHEMY_BOARD_DEFAULT_MEMSIZE	0x04000000
+
+#else	/* Au1550/Au1200-based develboards */
+#define ALCHEMY_BOARD_DEFAULT_MEMSIZE	0x08000000
+#endif
 
 void __init prom_init(void)
 {
@@ -51,7 +55,7 @@ void __init prom_init(void)
 	prom_init_cmdline();
 	memsize_str = prom_getenv("memsize");
 	if (!memsize_str)
-		memsize = 0x08000000;
+		memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
 	else
 		strict_strtoul(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
-- 
GitLab


From 7179380ee9bdeb5fa2ff07581f512fe0f5382e5b Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:16 +0100
Subject: [PATCH 136/492] MIPS: Alchemy: move commandline mangling out of
 common code

Not every alchemy-based board might want these options forced on it,
and most of this stuff seems to be intended for devboard code anyway.
Remove commandline mangling code out of common chip code and instead
add relevant sections to all in-tree boards to not change existing
behaviour.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/setup.c              | 34 +++----------------
 .../alchemy/devboards/db1x00/board_setup.c    | 28 +++++++++++++++
 .../alchemy/devboards/pb1000/board_setup.c    | 10 ++++++
 .../alchemy/devboards/pb1100/board_setup.c    | 27 +++++++++++++++
 .../alchemy/devboards/pb1200/board_setup.c    | 24 +++++++------
 .../alchemy/devboards/pb1500/board_setup.c    | 18 ++++++++++
 .../alchemy/devboards/pb1550/board_setup.c    | 12 +++++++
 arch/mips/alchemy/mtx-1/board_setup.c         | 12 +++++++
 arch/mips/alchemy/xxs1500/board_setup.c       | 12 +++++++
 9 files changed, 136 insertions(+), 41 deletions(-)

diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 1ac6b06f42a..9889ec3ba4c 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -35,7 +35,6 @@
 #include <asm/time.h>
 
 #include <au1000.h>
-#include <prom.h>
 
 extern void __init board_setup(void);
 extern void au1000_restart(char *);
@@ -46,12 +45,15 @@ extern void set_cpuspec(void);
 void __init plat_mem_setup(void)
 {
 	struct	cpu_spec *sp;
-	char *argptr;
 	unsigned long prid, cpufreq, bclk;
 
 	set_cpuspec();
 	sp = cur_cpu_spec[0];
 
+	_machine_restart = au1000_restart;
+	_machine_halt = au1000_halt;
+	pm_power_off = au1000_power_off;
+
 	board_setup();  /* board specific setup */
 
 	prid = read_c0_prid();
@@ -79,34 +81,6 @@ void __init plat_mem_setup(void)
 		/* Clear to obtain best system bus performance */
 		clear_c0_config(1 << 19); /* Clear Config[OD] */
 
-	argptr = prom_getcmdline();
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	argptr = strstr(argptr, "console=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS0,115200");
-	}
-#endif
-
-#ifdef CONFIG_FB_AU1100
-	argptr = strstr(argptr, "video=");
-	if (argptr == NULL) {
-		argptr = prom_getcmdline();
-		/* default panel */
-		/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
-	}
-#endif
-
-#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
-	/* au1000 does not support vra, au1500 and au1100 do */
-	strcat(argptr, " au1000_audio=vra");
-	argptr = prom_getcmdline();
-#endif
-	_machine_restart = au1000_restart;
-	_machine_halt = au1000_halt;
-	pm_power_off = au1000_power_off;
-
 	/* IO/MEM resources. */
 	set_io_port_base(0);
 	ioport_resource.start = IOPORT_RESOURCE_START;
diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c
index 427f799031b..a75ffbf99f2 100644
--- a/arch/mips/alchemy/devboards/db1x00/board_setup.c
+++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c
@@ -32,6 +32,9 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/db1x00.h>
 
+#include <prom.h>
+
+
 static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
 
 const char *get_system_type(void)
@@ -52,6 +55,31 @@ void board_reset(void)
 void __init board_setup(void)
 {
 	u32 pin_func = 0;
+	char *argptr;
+
+	argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	argptr = strstr(argptr, "console=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		strcat(argptr, " console=ttyS0,115200");
+	}
+#endif
+
+#ifdef CONFIG_FB_AU1100
+	argptr = strstr(argptr, "video=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		/* default panel */
+		/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+	}
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+	/* au1000 does not support vra, au1500 and au1100 do */
+	strcat(argptr, " au1000_audio=vra");
+	argptr = prom_getcmdline();
+#endif
 
 	/* Not valid for Au1550 */
 #if defined(CONFIG_IRDA) && \
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index b75e487f53e..889c8fda2ab 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -28,6 +28,7 @@
 #include <linux/interrupt.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1000.h>
+#include <prom.h>
 
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
@@ -52,6 +53,15 @@ void __init board_setup(void)
 	u32 sys_freqctrl, sys_clksrc;
 	u32 prid = read_c0_prid();
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	char *argptr = prom_getcmdline();
+	argptr = strstr(argptr, "console=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		strcat(argptr, " console=ttyS0,115200");
+	}
+#endif
+
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
 	au_writel(0, SYS_PINSTATERD);
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
index 9daab7e2922..fbd211e1348 100644
--- a/arch/mips/alchemy/devboards/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c
@@ -29,6 +29,8 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1100.h>
 
+#include <prom.h>
+
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 	{ AU1000_GPIO_9,  INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
@@ -54,6 +56,31 @@ void board_reset(void)
 void __init board_setup(void)
 {
 	volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
+	char *argptr;
+
+	argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	argptr = strstr(argptr, "console=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		strcat(argptr, " console=ttyS0,115200");
+	}
+#endif
+
+#ifdef CONFIG_FB_AU1100
+	argptr = strstr(argptr, "video=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		/* default panel */
+		/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+	}
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+	/* au1000 does not support vra, au1500 and au1100 do */
+	strcat(argptr, " au1000_audio=vra");
+	argptr = prom_getcmdline();
+#endif
 
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
 	au_writel(8, SYS_AUXPLL);
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
index 8f03dc8fdd2..b5585e46200 100644
--- a/arch/mips/alchemy/devboards/pb1200/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c
@@ -46,7 +46,19 @@ void board_reset(void)
 
 void __init board_setup(void)
 {
-	char *argptr = NULL;
+	char *argptr;
+
+	argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	argptr = strstr(argptr, "console=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		strcat(argptr, " console=ttyS0,115200");
+	}
+#endif
+#ifdef CONFIG_FB_AU1200
+	strcat(argptr, " video=au1200fb:panel:bs");
+#endif
 
 #if 0
 	{
@@ -104,16 +116,6 @@ void __init board_setup(void)
 	}
 #endif
 
-#ifdef CONFIG_FB_AU1200
-	argptr = prom_getcmdline();
-#ifdef CONFIG_MIPS_PB1200
-	strcat(argptr, " video=au1200fb:panel:bs");
-#endif
-#ifdef CONFIG_MIPS_DB1200
-	strcat(argptr, " video=au1200fb:panel:bs");
-#endif
-#endif
-
 	/*
 	 * The Pb1200 development board uses external MUX for PSC0 to
 	 * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index 47173f1e5ae..dcb36a66442 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -29,6 +29,8 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1500.h>
 
+#include <prom.h>
+
 
 char irq_tab_alchemy[][5] __initdata = {
 	[12] = { -1, INTA, INTX, INTX, INTX },   /* IDSEL 12 - HPT370	*/
@@ -61,6 +63,22 @@ void __init board_setup(void)
 {
 	u32 pin_func;
 	u32 sys_freqctrl, sys_clksrc;
+	char *argptr;
+
+	argptr = prom_getcmdline();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	argptr = strstr(argptr, "console=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		strcat(argptr, " console=ttyS0,115200");
+	}
+#endif
+
+#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
+	/* au1000 does not support vra, au1500 and au1100 do */
+	strcat(argptr, " au1000_audio=vra");
+	argptr = prom_getcmdline();
+#endif
 
 	sys_clksrc = sys_freqctrl = pin_func = 0;
 	/* Set AUX clock to 12 MHz * 8 = 96 MHz */
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index 25a9190265d..f462652d762 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -32,6 +32,8 @@
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1550.h>
 
+#include <prom.h>
+
 
 char irq_tab_alchemy[][5] __initdata = {
 	[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left)  */
@@ -61,6 +63,16 @@ void __init board_setup(void)
 {
 	u32 pin_func;
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	char *argptr;
+	argptr = prom_getcmdline();
+	argptr = strstr(argptr, "console=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		strcat(argptr, " console=ttyS0,115200");
+	}
+#endif
+
 	/*
 	 * Enable PSC1 SYNC for AC'97.  Normaly done in audio driver,
 	 * but it is board specific code, so put it here.
diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c
index 3f8079186cf..8ed1ae12bc5 100644
--- a/arch/mips/alchemy/mtx-1/board_setup.c
+++ b/arch/mips/alchemy/mtx-1/board_setup.c
@@ -32,6 +32,8 @@
 
 #include <asm/mach-au1x00/au1000.h>
 
+#include <prom.h>
+
 extern int (*board_pci_idsel)(unsigned int devsel, int assert);
 int mtx1_pci_idsel(unsigned int devsel, int assert);
 
@@ -43,6 +45,16 @@ void board_reset(void)
 
 void __init board_setup(void)
 {
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	char *argptr;
+	argptr = prom_getcmdline();
+	argptr = strstr(argptr, "console=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		strcat(argptr, " console=ttyS0,115200");
+	}
+#endif
+
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* Enable USB power switch */
 	au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c
index 4c587acac5c..a2634fabc50 100644
--- a/arch/mips/alchemy/xxs1500/board_setup.c
+++ b/arch/mips/alchemy/xxs1500/board_setup.c
@@ -28,6 +28,8 @@
 
 #include <asm/mach-au1x00/au1000.h>
 
+#include <prom.h>
+
 void board_reset(void)
 {
 	/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
@@ -38,6 +40,16 @@ void __init board_setup(void)
 {
 	u32 pin_func;
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	char *argptr;
+	argptr = prom_getcmdline();
+	argptr = strstr(argptr, "console=");
+	if (argptr == NULL) {
+		argptr = prom_getcmdline();
+		strcat(argptr, " console=ttyS0,115200");
+	}
+#endif
+
 	/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
 	pin_func  = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
 	pin_func |= SYS_PF_UR3;
-- 
GitLab


From 785e3268e2951d4c0c21417c8e5d8004b2ab2480 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:17 +0100
Subject: [PATCH 137/492] MIPS: Alchemy: update core interrupt code.

This patch attempts to modernize core Alchemy interrupt handling code.

- add irq_chips for irq controllers instead of irq type,
- add a set_type() hook to change irq trigger type during runtime,
- add a set_wake() hook to control GPIO0..7 based wakeup,
- use linux' IRQF_TRIGGER_ constants instead of homebrew ones,
- enable GENERIC_HARDIRQS_NO__DO_IRQ.
- simplify plat_irq_dispatch
- merge au1xxx_irqmap into irq.c file, the only place where its
  contents are referenced.
- board_init_irq() is now mandatory for every board; use it to register
  the remaining (gpio-based) interrupt sources; update all boards
  accordingly.

Run-tested on Db1200 and other Au1200 based platforms.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c
---
 arch/mips/alchemy/Kconfig                     |   1 +
 arch/mips/alchemy/common/Makefile             |   2 +-
 arch/mips/alchemy/common/au1xxx_irqmap.c      | 205 -----
 arch/mips/alchemy/common/irq.c                | 785 ++++++++++--------
 arch/mips/alchemy/common/power.c              |   6 +-
 arch/mips/alchemy/devboards/db1x00/irqmap.c   |  24 +-
 .../alchemy/devboards/pb1000/board_setup.c    |   9 +-
 .../alchemy/devboards/pb1100/board_setup.c    |  16 +-
 .../alchemy/devboards/pb1200/board_setup.c    |   5 -
 arch/mips/alchemy/devboards/pb1200/irqmap.c   |   7 +-
 .../alchemy/devboards/pb1500/board_setup.c    |  18 +-
 .../alchemy/devboards/pb1550/board_setup.c    |  13 +-
 arch/mips/alchemy/mtx-1/irqmap.c              |  18 +-
 arch/mips/alchemy/xxs1500/irqmap.c            |  31 +-
 arch/mips/include/asm/mach-au1x00/au1000.h    |  18 +-
 15 files changed, 514 insertions(+), 644 deletions(-)
 delete mode 100644 arch/mips/alchemy/common/au1xxx_irqmap.c

diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index e4a057d80ab..4397d94f327 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -134,3 +134,4 @@ config SOC_AU1X00
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
+	select GENERIC_HARDIRQS_NO__DO_IRQ
diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index df48fd65bbf..28b8aebb35e 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -6,7 +6,7 @@
 #
 
 obj-y += prom.o irq.o puts.o time.o reset.o \
-	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
+	clocks.o platform.o power.o setup.o \
 	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
 obj-$(CONFIG_PCI)		+= pci.o
diff --git a/arch/mips/alchemy/common/au1xxx_irqmap.c b/arch/mips/alchemy/common/au1xxx_irqmap.c
deleted file mode 100644
index c7ca1596394..00000000000
--- a/arch/mips/alchemy/common/au1xxx_irqmap.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx processor specific IRQ tables
- *
- * Copyright 2004 Embedded Edge, LLC
- *	dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#include <au1000.h>
-
-/* The IC0 interrupt table.  This is processor, rather than
- * board dependent, so no reason to keep this info in the board
- * dependent files.
- *
- * Careful if you change match 2 request!
- * The interrupt handler is called directly from the low level dispatch code.
- */
-struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
-
-#if defined(CONFIG_SOC_AU1000)
-	{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
-
-#elif defined(CONFIG_SOC_AU1500)
-
-	{ AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
-
-#elif defined(CONFIG_SOC_AU1100)
-
-	{ AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	/* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */
-	{ AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
-
-#elif defined(CONFIG_SOC_AU1550)
-
-	{ AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-
-#elif defined(CONFIG_SOC_AU1200)
-
-	{ AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 },
-
-#else
-#error "Error: Unknown Alchemy SOC"
-#endif
-
-};
-
-int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index 40c6ceceb5f..c54384779fb 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -24,6 +24,7 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
 #include <linux/bitops.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
@@ -36,15 +37,174 @@
 #include <asm/mach-pb1x00/pb1000.h>
 #endif
 
-#define EXT_INTC0_REQ0 2 /* IP 2 */
-#define EXT_INTC0_REQ1 3 /* IP 3 */
-#define EXT_INTC1_REQ0 4 /* IP 4 */
-#define EXT_INTC1_REQ1 5 /* IP 5 */
-#define MIPS_TIMER_IP  7 /* IP 7 */
+static DEFINE_SPINLOCK(irq_lock);
 
-void (*board_init_irq)(void) __initdata = NULL;
+static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
+
+/* per-processor fixed function irqs */
+struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = {
+
+#if defined(CONFIG_SOC_AU1000)
+	{ AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+
+#elif defined(CONFIG_SOC_AU1500)
+
+	{ AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+
+#elif defined(CONFIG_SOC_AU1100)
+
+	{ AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 },
+
+#elif defined(CONFIG_SOC_AU1550)
+
+	{ AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 },
+	{ AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+
+#elif defined(CONFIG_SOC_AU1200)
+
+	{ AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 },
+	{ AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 },
+	{ AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+	{ AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
+
+#else
+#error "Error: Unknown Alchemy SOC"
+#endif
+};
 
-static DEFINE_SPINLOCK(irq_lock);
 
 #ifdef CONFIG_PM
 
@@ -130,67 +290,47 @@ void restore_au1xxx_intctl(void)
 #endif /* CONFIG_PM */
 
 
-inline void local_enable_irq(unsigned int irq_nr)
+static void au1x_ic0_unmask(unsigned int irq_nr)
 {
 	unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
-
-	if (bit >= 32) {
-		au_writel(1 << (bit - 32), IC1_MASKSET);
-		au_writel(1 << (bit - 32), IC1_WAKESET);
-	} else {
-		au_writel(1 << bit, IC0_MASKSET);
-		au_writel(1 << bit, IC0_WAKESET);
-	}
+	au_writel(1 << bit, IC0_MASKSET);
+	au_writel(1 << bit, IC0_WAKESET);
 	au_sync();
 }
 
-
-inline void local_disable_irq(unsigned int irq_nr)
+static void au1x_ic1_unmask(unsigned int irq_nr)
 {
-	unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
+	unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
+	au_writel(1 << bit, IC1_MASKSET);
+	au_writel(1 << bit, IC1_WAKESET);
 
-	if (bit >= 32) {
-		au_writel(1 << (bit - 32), IC1_MASKCLR);
-		au_writel(1 << (bit - 32), IC1_WAKECLR);
-	} else {
-		au_writel(1 << bit, IC0_MASKCLR);
-		au_writel(1 << bit, IC0_WAKECLR);
-	}
+/* very hacky. does the pb1000 cpld auto-disable this int?
+ * nowhere in the current kernel sources is it disabled.	--mlau
+ */
+#if defined(CONFIG_MIPS_PB1000)
+	if (irq_nr == AU1000_GPIO_15)
+		au_writel(0x4000, PB1000_MDR); /* enable int */
+#endif
 	au_sync();
 }
 
-
-static inline void mask_and_ack_rise_edge_irq(unsigned int irq_nr)
+static void au1x_ic0_mask(unsigned int irq_nr)
 {
 	unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
-
-	if (bit >= 32) {
-		au_writel(1 << (bit - 32), IC1_RISINGCLR);
-		au_writel(1 << (bit - 32), IC1_MASKCLR);
-	} else {
-		au_writel(1 << bit, IC0_RISINGCLR);
-		au_writel(1 << bit, IC0_MASKCLR);
-	}
+	au_writel(1 << bit, IC0_MASKCLR);
+	au_writel(1 << bit, IC0_WAKECLR);
 	au_sync();
 }
 
-
-static inline void mask_and_ack_fall_edge_irq(unsigned int irq_nr)
+static void au1x_ic1_mask(unsigned int irq_nr)
 {
-	unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
-
-	if (bit >= 32) {
-		au_writel(1 << (bit - 32), IC1_FALLINGCLR);
-		au_writel(1 << (bit - 32), IC1_MASKCLR);
-	} else {
-		au_writel(1 << bit, IC0_FALLINGCLR);
-		au_writel(1 << bit, IC0_MASKCLR);
-	}
+	unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
+	au_writel(1 << bit, IC1_MASKCLR);
+	au_writel(1 << bit, IC1_WAKECLR);
 	au_sync();
 }
 
-
-static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr)
+static void au1x_ic0_ack(unsigned int irq_nr)
 {
 	unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
 
@@ -198,349 +338,229 @@ static inline void mask_and_ack_either_edge_irq(unsigned int irq_nr)
 	 * This may assume that we don't get interrupts from
 	 * both edges at once, or if we do, that we don't care.
 	 */
-	if (bit >= 32) {
-		au_writel(1 << (bit - 32), IC1_FALLINGCLR);
-		au_writel(1 << (bit - 32), IC1_RISINGCLR);
-		au_writel(1 << (bit - 32), IC1_MASKCLR);
-	} else {
-		au_writel(1 << bit, IC0_FALLINGCLR);
-		au_writel(1 << bit, IC0_RISINGCLR);
-		au_writel(1 << bit, IC0_MASKCLR);
-	}
+	au_writel(1 << bit, IC0_FALLINGCLR);
+	au_writel(1 << bit, IC0_RISINGCLR);
 	au_sync();
 }
 
-static inline void mask_and_ack_level_irq(unsigned int irq_nr)
-{
-	local_disable_irq(irq_nr);
-	au_sync();
-#if defined(CONFIG_MIPS_PB1000)
-	if (irq_nr == AU1000_GPIO_15) {
-		au_writel(0x8000, PB1000_MDR); /* ack int */
-		au_sync();
-	}
-#endif
-}
-
-static void end_irq(unsigned int irq_nr)
+static void au1x_ic1_ack(unsigned int irq_nr)
 {
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		local_enable_irq(irq_nr);
-
-#if defined(CONFIG_MIPS_PB1000)
-	if (irq_nr == AU1000_GPIO_15) {
-		au_writel(0x4000, PB1000_MDR); /* enable int */
-		au_sync();
-	}
-#endif
-}
-
-unsigned long save_local_and_disable(int controller)
-{
-	int i;
-	unsigned long flags, mask;
-
-	spin_lock_irqsave(&irq_lock, flags);
-	if (controller) {
-		mask = au_readl(IC1_MASKSET);
-		for (i = 32; i < 64; i++)
-			local_disable_irq(i);
-	} else {
-		mask = au_readl(IC0_MASKSET);
-		for (i = 0; i < 32; i++)
-			local_disable_irq(i);
-	}
-	spin_unlock_irqrestore(&irq_lock, flags);
+	unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
 
-	return mask;
+	/*
+	 * This may assume that we don't get interrupts from
+	 * both edges at once, or if we do, that we don't care.
+	 */
+	au_writel(1 << bit, IC1_FALLINGCLR);
+	au_writel(1 << bit, IC1_RISINGCLR);
+	au_sync();
 }
 
-void restore_local_and_enable(int controller, unsigned long mask)
+static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
 {
-	int i;
-	unsigned long flags, new_mask;
+	unsigned int bit = irq - AU1000_INTC1_INT_BASE;
+	unsigned long wakemsk, flags;
 
-	spin_lock_irqsave(&irq_lock, flags);
-	for (i = 0; i < 32; i++)
-		if (mask & (1 << i)) {
-			if (controller)
-				local_enable_irq(i + 32);
-			else
-				local_enable_irq(i);
-		}
+	/* only GPIO 0-7 can act as wakeup source: */
+	if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7))
+		return -EINVAL;
 
-	if (controller)
-		new_mask = au_readl(IC1_MASKSET);
+	local_irq_save(flags);
+	wakemsk = au_readl(SYS_WAKEMSK);
+	if (on)
+		wakemsk |= 1 << bit;
 	else
-		new_mask = au_readl(IC0_MASKSET);
+		wakemsk &= ~(1 << bit);
+	au_writel(wakemsk, SYS_WAKEMSK);
+	au_sync();
+	local_irq_restore(flags);
 
-	spin_unlock_irqrestore(&irq_lock, flags);
+	return 0;
 }
 
-
-static struct irq_chip rise_edge_irq_type = {
-	.name		= "Au1000 Rise Edge",
-	.ack		= mask_and_ack_rise_edge_irq,
-	.mask		= local_disable_irq,
-	.mask_ack	= mask_and_ack_rise_edge_irq,
-	.unmask		= local_enable_irq,
-	.end		= end_irq,
-};
-
-static struct irq_chip fall_edge_irq_type = {
-	.name		= "Au1000 Fall Edge",
-	.ack		= mask_and_ack_fall_edge_irq,
-	.mask		= local_disable_irq,
-	.mask_ack	= mask_and_ack_fall_edge_irq,
-	.unmask		= local_enable_irq,
-	.end		= end_irq,
-};
-
-static struct irq_chip either_edge_irq_type = {
-	.name		= "Au1000 Rise or Fall Edge",
-	.ack		= mask_and_ack_either_edge_irq,
-	.mask		= local_disable_irq,
-	.mask_ack	= mask_and_ack_either_edge_irq,
-	.unmask		= local_enable_irq,
-	.end		= end_irq,
+/*
+ * irq_chips for both ICs; this way the mask handlers can be
+ * as short as possible.
+ *
+ * NOTE: the ->ack() callback is used by the handle_edge_irq
+ *	 flowhandler only, the ->mask_ack() one by handle_level_irq,
+ *	 so no need for an irq_chip for each type of irq (level/edge).
+ */
+static struct irq_chip au1x_ic0_chip = {
+	.name		= "Alchemy-IC0",
+	.ack		= au1x_ic0_ack,		/* edge */
+	.mask		= au1x_ic0_mask,
+	.mask_ack	= au1x_ic0_mask,	/* level */
+	.unmask		= au1x_ic0_unmask,
+	.set_type	= au1x_ic_settype,
 };
 
-static struct irq_chip level_irq_type = {
-	.name		= "Au1000 Level",
-	.ack		= mask_and_ack_level_irq,
-	.mask		= local_disable_irq,
-	.mask_ack	= mask_and_ack_level_irq,
-	.unmask		= local_enable_irq,
-	.end		= end_irq,
+static struct irq_chip au1x_ic1_chip = {
+	.name		= "Alchemy-IC1",
+	.ack		= au1x_ic1_ack,		/* edge */
+	.mask		= au1x_ic1_mask,
+	.mask_ack	= au1x_ic1_mask,	/* level */
+	.unmask		= au1x_ic1_unmask,
+	.set_type	= au1x_ic_settype,
+	.set_wake	= au1x_ic1_setwake,
 };
 
-static void __init setup_local_irq(unsigned int irq_nr, int type, int int_req)
+static int au1x_ic_settype(unsigned int irq, unsigned int flow_type)
 {
-	unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
-
-	if (irq_nr > AU1000_MAX_INTR)
-		return;
-
-	/* Config2[n], Config1[n], Config0[n] */
-	if (bit >= 32) {
-		switch (type) {
-		case INTC_INT_RISE_EDGE: /* 0:0:1 */
-			au_writel(1 << (bit - 32), IC1_CFG2CLR);
-			au_writel(1 << (bit - 32), IC1_CFG1CLR);
-			au_writel(1 << (bit - 32), IC1_CFG0SET);
-			set_irq_chip(irq_nr, &rise_edge_irq_type);
-			break;
-		case INTC_INT_FALL_EDGE: /* 0:1:0 */
-			au_writel(1 << (bit - 32), IC1_CFG2CLR);
-			au_writel(1 << (bit - 32), IC1_CFG1SET);
-			au_writel(1 << (bit - 32), IC1_CFG0CLR);
-			set_irq_chip(irq_nr, &fall_edge_irq_type);
-			break;
-		case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */
-			au_writel(1 << (bit - 32), IC1_CFG2CLR);
-			au_writel(1 << (bit - 32), IC1_CFG1SET);
-			au_writel(1 << (bit - 32), IC1_CFG0SET);
-			set_irq_chip(irq_nr, &either_edge_irq_type);
-			break;
-		case INTC_INT_HIGH_LEVEL: /* 1:0:1 */
-			au_writel(1 << (bit - 32), IC1_CFG2SET);
-			au_writel(1 << (bit - 32), IC1_CFG1CLR);
-			au_writel(1 << (bit - 32), IC1_CFG0SET);
-			set_irq_chip(irq_nr, &level_irq_type);
-			break;
-		case INTC_INT_LOW_LEVEL: /* 1:1:0 */
-			au_writel(1 << (bit - 32), IC1_CFG2SET);
-			au_writel(1 << (bit - 32), IC1_CFG1SET);
-			au_writel(1 << (bit - 32), IC1_CFG0CLR);
-			set_irq_chip(irq_nr, &level_irq_type);
-			break;
-		case INTC_INT_DISABLED: /* 0:0:0 */
-			au_writel(1 << (bit - 32), IC1_CFG0CLR);
-			au_writel(1 << (bit - 32), IC1_CFG1CLR);
-			au_writel(1 << (bit - 32), IC1_CFG2CLR);
-			break;
-		default: /* disable the interrupt */
-			printk(KERN_WARNING "unexpected int type %d (irq %d)\n",
-			       type, irq_nr);
-			au_writel(1 << (bit - 32), IC1_CFG0CLR);
-			au_writel(1 << (bit - 32), IC1_CFG1CLR);
-			au_writel(1 << (bit - 32), IC1_CFG2CLR);
-			return;
-		}
-		if (int_req) /* assign to interrupt request 1 */
-			au_writel(1 << (bit - 32), IC1_ASSIGNCLR);
-		else	     /* assign to interrupt request 0 */
-			au_writel(1 << (bit - 32), IC1_ASSIGNSET);
-		au_writel(1 << (bit - 32), IC1_SRCSET);
-		au_writel(1 << (bit - 32), IC1_MASKCLR);
-		au_writel(1 << (bit - 32), IC1_WAKECLR);
+	struct irq_chip *chip;
+	unsigned long icr[6];
+	unsigned int bit, ic;
+	int ret;
+
+	if (irq >= AU1000_INTC1_INT_BASE) {
+		bit = irq - AU1000_INTC1_INT_BASE;
+		chip = &au1x_ic1_chip;
+		ic = 1;
 	} else {
-		switch (type) {
-		case INTC_INT_RISE_EDGE: /* 0:0:1 */
-			au_writel(1 << bit, IC0_CFG2CLR);
-			au_writel(1 << bit, IC0_CFG1CLR);
-			au_writel(1 << bit, IC0_CFG0SET);
-			set_irq_chip(irq_nr, &rise_edge_irq_type);
-			break;
-		case INTC_INT_FALL_EDGE: /* 0:1:0 */
-			au_writel(1 << bit, IC0_CFG2CLR);
-			au_writel(1 << bit, IC0_CFG1SET);
-			au_writel(1 << bit, IC0_CFG0CLR);
-			set_irq_chip(irq_nr, &fall_edge_irq_type);
-			break;
-		case INTC_INT_RISE_AND_FALL_EDGE: /* 0:1:1 */
-			au_writel(1 << bit, IC0_CFG2CLR);
-			au_writel(1 << bit, IC0_CFG1SET);
-			au_writel(1 << bit, IC0_CFG0SET);
-			set_irq_chip(irq_nr, &either_edge_irq_type);
-			break;
-		case INTC_INT_HIGH_LEVEL: /* 1:0:1 */
-			au_writel(1 << bit, IC0_CFG2SET);
-			au_writel(1 << bit, IC0_CFG1CLR);
-			au_writel(1 << bit, IC0_CFG0SET);
-			set_irq_chip(irq_nr, &level_irq_type);
-			break;
-		case INTC_INT_LOW_LEVEL: /* 1:1:0 */
-			au_writel(1 << bit, IC0_CFG2SET);
-			au_writel(1 << bit, IC0_CFG1SET);
-			au_writel(1 << bit, IC0_CFG0CLR);
-			set_irq_chip(irq_nr, &level_irq_type);
-			break;
-		case INTC_INT_DISABLED: /* 0:0:0 */
-			au_writel(1 << bit, IC0_CFG0CLR);
-			au_writel(1 << bit, IC0_CFG1CLR);
-			au_writel(1 << bit, IC0_CFG2CLR);
-			break;
-		default: /* disable the interrupt */
-			printk(KERN_WARNING "unexpected int type %d (irq %d)\n",
-			       type, irq_nr);
-			au_writel(1 << bit, IC0_CFG0CLR);
-			au_writel(1 << bit, IC0_CFG1CLR);
-			au_writel(1 << bit, IC0_CFG2CLR);
-			return;
-		}
-		if (int_req) /* assign to interrupt request 1 */
-			au_writel(1 << bit, IC0_ASSIGNCLR);
-		else	     /* assign to interrupt request 0 */
-			au_writel(1 << bit, IC0_ASSIGNSET);
-		au_writel(1 << bit, IC0_SRCSET);
-		au_writel(1 << bit, IC0_MASKCLR);
-		au_writel(1 << bit, IC0_WAKECLR);
+		bit = irq - AU1000_INTC0_INT_BASE;
+		chip = &au1x_ic0_chip;
+		ic = 0;
+	}
+
+	if (bit > 31)
+		return -EINVAL;
+
+	icr[0] = ic ? IC1_CFG0SET : IC0_CFG0SET;
+	icr[1] = ic ? IC1_CFG1SET : IC0_CFG1SET;
+	icr[2] = ic ? IC1_CFG2SET : IC0_CFG2SET;
+	icr[3] = ic ? IC1_CFG0CLR : IC0_CFG0CLR;
+	icr[4] = ic ? IC1_CFG1CLR : IC0_CFG1CLR;
+	icr[5] = ic ? IC1_CFG2CLR : IC0_CFG2CLR;
+
+	ret = 0;
+
+	switch (flow_type) {	/* cfgregs 2:1:0 */
+	case IRQ_TYPE_EDGE_RISING:	/* 0:0:1 */
+		au_writel(1 << bit, icr[5]);
+		au_writel(1 << bit, icr[4]);
+		au_writel(1 << bit, icr[0]);
+		set_irq_chip_and_handler_name(irq, chip,
+				handle_edge_irq, "riseedge");
+		break;
+	case IRQ_TYPE_EDGE_FALLING:	/* 0:1:0 */
+		au_writel(1 << bit, icr[5]);
+		au_writel(1 << bit, icr[1]);
+		au_writel(1 << bit, icr[3]);
+		set_irq_chip_and_handler_name(irq, chip,
+				handle_edge_irq, "falledge");
+		break;
+	case IRQ_TYPE_EDGE_BOTH:	/* 0:1:1 */
+		au_writel(1 << bit, icr[5]);
+		au_writel(1 << bit, icr[1]);
+		au_writel(1 << bit, icr[0]);
+		set_irq_chip_and_handler_name(irq, chip,
+				handle_edge_irq, "bothedge");
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:	/* 1:0:1 */
+		au_writel(1 << bit, icr[2]);
+		au_writel(1 << bit, icr[4]);
+		au_writel(1 << bit, icr[0]);
+		set_irq_chip_and_handler_name(irq, chip,
+				handle_level_irq, "hilevel");
+		break;
+	case IRQ_TYPE_LEVEL_LOW:	/* 1:1:0 */
+		au_writel(1 << bit, icr[2]);
+		au_writel(1 << bit, icr[1]);
+		au_writel(1 << bit, icr[3]);
+		set_irq_chip_and_handler_name(irq, chip,
+				handle_level_irq, "lowlevel");
+		break;
+	case IRQ_TYPE_NONE:		/* 0:0:0 */
+		au_writel(1 << bit, icr[5]);
+		au_writel(1 << bit, icr[4]);
+		au_writel(1 << bit, icr[3]);
+		/* set at least chip so we can call set_irq_type() on it */
+		set_irq_chip(irq, chip);
+		break;
+	default:
+		ret = -EINVAL;
 	}
 	au_sync();
-}
 
-/*
- * Interrupts are nested. Even if an interrupt handler is registered
- * as "fast", we might get another interrupt before we return from
- * intcX_reqX_irqdispatch().
- */
+	return ret;
+}
 
-static void intc0_req0_irqdispatch(void)
+asmlinkage void plat_irq_dispatch(void)
 {
-	static unsigned long intc0_req0;
-	unsigned int bit;
-
-	intc0_req0 |= au_readl(IC0_REQ0INT);
+	unsigned int pending = read_c0_status() & read_c0_cause();
+	unsigned long s, off, bit;
 
-	if (!intc0_req0)
+	if (pending & CAUSEF_IP7) {
+		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
 		return;
-
+	} else if (pending & CAUSEF_IP2) {
+		s = IC0_REQ0INT;
+		off = AU1000_INTC0_INT_BASE;
+	} else if (pending & CAUSEF_IP3) {
+		s = IC0_REQ1INT;
+		off = AU1000_INTC0_INT_BASE;
+	} else if (pending & CAUSEF_IP4) {
+		s = IC1_REQ0INT;
+		off = AU1000_INTC1_INT_BASE;
+	} else if (pending & CAUSEF_IP5) {
+		s = IC1_REQ1INT;
+		off = AU1000_INTC1_INT_BASE;
+	} else
+		goto spurious;
+
+	bit = 0;
+	s = au_readl(s);
+	if (unlikely(!s)) {
+spurious:
+		spurious_interrupt();
+		return;
+	}
 #ifdef AU1000_USB_DEV_REQ_INT
 	/*
 	 * Because of the tight timing of SETUP token to reply
 	 * transactions, the USB devices-side packet complete
 	 * interrupt needs the highest priority.
 	 */
-	if ((intc0_req0 & (1 << AU1000_USB_DEV_REQ_INT))) {
-		intc0_req0 &= ~(1 << AU1000_USB_DEV_REQ_INT);
+	bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE);
+	if ((pending & CAUSEF_IP2) && (s & bit)) {
 		do_IRQ(AU1000_USB_DEV_REQ_INT);
 		return;
 	}
 #endif
-	bit = __ffs(intc0_req0);
-	intc0_req0 &= ~(1 << bit);
-	do_IRQ(AU1000_INTC0_INT_BASE + bit);
+	do_IRQ(__ffs(s) + off);
 }
 
-
-static void intc0_req1_irqdispatch(void)
+/* setup edge/level and assign request 0/1 */
+void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count)
 {
-	static unsigned long intc0_req1;
-	unsigned int bit;
-
-	intc0_req1 |= au_readl(IC0_REQ1INT);
-
-	if (!intc0_req1)
-		return;
-
-	bit = __ffs(intc0_req1);
-	intc0_req1 &= ~(1 << bit);
-	do_IRQ(AU1000_INTC0_INT_BASE + bit);
-}
-
-
-/*
- * Interrupt Controller 1:
- * interrupts 32 - 63
- */
-static void intc1_req0_irqdispatch(void)
-{
-	static unsigned long intc1_req0;
-	unsigned int bit;
-
-	intc1_req0 |= au_readl(IC1_REQ0INT);
-
-	if (!intc1_req0)
-		return;
-
-	bit = __ffs(intc1_req0);
-	intc1_req0 &= ~(1 << bit);
-	do_IRQ(AU1000_INTC1_INT_BASE + bit);
-}
-
-
-static void intc1_req1_irqdispatch(void)
-{
-	static unsigned long intc1_req1;
-	unsigned int bit;
-
-	intc1_req1 |= au_readl(IC1_REQ1INT);
-
-	if (!intc1_req1)
-		return;
-
-	bit = __ffs(intc1_req1);
-	intc1_req1 &= ~(1 << bit);
-	do_IRQ(AU1000_INTC1_INT_BASE + bit);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause();
+	unsigned int bit, irq_nr;
+
+	while (count--) {
+		irq_nr = map[count].im_irq;
+
+		if (((irq_nr < AU1000_INTC0_INT_BASE) ||
+		     (irq_nr >= AU1000_INTC0_INT_BASE + 32)) &&
+		    ((irq_nr < AU1000_INTC1_INT_BASE) ||
+		     (irq_nr >= AU1000_INTC1_INT_BASE + 32)))
+			continue;
+
+		if (irq_nr >= AU1000_INTC1_INT_BASE) {
+			bit = irq_nr - AU1000_INTC1_INT_BASE;
+			if (map[count].im_request)
+				au_writel(1 << bit, IC1_ASSIGNCLR);
+		} else {
+			bit = irq_nr - AU1000_INTC0_INT_BASE;
+			if (map[count].im_request)
+				au_writel(1 << bit, IC0_ASSIGNCLR);
+		}
 
-	if (pending & CAUSEF_IP7)
-		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
-	else if (pending & CAUSEF_IP2)
-		intc0_req0_irqdispatch();
-	else if (pending & CAUSEF_IP3)
-		intc0_req1_irqdispatch();
-	else if (pending & CAUSEF_IP4)
-		intc1_req0_irqdispatch();
-	else if (pending  & CAUSEF_IP5)
-		intc1_req1_irqdispatch();
-	else
-		spurious_interrupt();
+		au1x_ic_settype(irq_nr, map[count].im_type);
+	}
 }
 
 void __init arch_init_irq(void)
 {
 	int i;
-	struct au1xxx_irqmap *imp;
-	extern struct au1xxx_irqmap au1xxx_irq_map[];
-	extern struct au1xxx_irqmap au1xxx_ic0_map[];
-	extern int au1xxx_nr_irqs;
-	extern int au1xxx_ic0_nr_irqs;
 
 	/*
 	 * Initialize interrupt controllers to a safe state.
@@ -569,28 +589,67 @@ void __init arch_init_irq(void)
 
 	mips_cpu_irq_init();
 
-	/*
-	 * Initialize IC0, which is fixed per processor.
+	/* register all 64 possible IC0+IC1 irq sources as type "none".
+	 * Use set_irq_type() to set edge/level behaviour at runtime.
 	 */
-	imp = au1xxx_ic0_map;
-	for (i = 0; i < au1xxx_ic0_nr_irqs; i++) {
-		setup_local_irq(imp->im_irq, imp->im_type, imp->im_request);
-		imp++;
-	}
+	for (i = AU1000_INTC0_INT_BASE;
+	     (i < AU1000_INTC0_INT_BASE + 32); i++)
+		au1x_ic_settype(i, IRQ_TYPE_NONE);
+
+	for (i = AU1000_INTC1_INT_BASE;
+	     (i < AU1000_INTC1_INT_BASE + 32); i++)
+		au1x_ic_settype(i, IRQ_TYPE_NONE);
 
 	/*
-	 * Now set up the irq mapping for the board.
+	 * Initialize IC0, which is fixed per processor.
 	 */
-	imp = au1xxx_irq_map;
-	for (i = 0; i < au1xxx_nr_irqs; i++) {
-		setup_local_irq(imp->im_irq, imp->im_type, imp->im_request);
-		imp++;
+	au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map));
+
+	/* Boards can register additional (GPIO-based) IRQs.
+	*/
+	board_init_irq();
+
+	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
+}
+
+unsigned long save_local_and_disable(int controller)
+{
+	int i;
+	unsigned long flags, mask;
+
+	spin_lock_irqsave(&irq_lock, flags);
+	if (controller) {
+		mask = au_readl(IC1_MASKSET);
+		for (i = 0; i < 32; i++)
+			au1x_ic1_mask(i + AU1000_INTC1_INT_BASE);
+	} else {
+		mask = au_readl(IC0_MASKSET);
+		for (i = 0; i < 32; i++)
+			au1x_ic0_mask(i + AU1000_INTC0_INT_BASE);
 	}
+	spin_unlock_irqrestore(&irq_lock, flags);
 
-	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4);
+	return mask;
+}
 
-	/* Board specific IRQ initialization.
-	*/
-	if (board_init_irq)
-		board_init_irq();
+void restore_local_and_enable(int controller, unsigned long mask)
+{
+	int i;
+	unsigned long flags, new_mask;
+
+	spin_lock_irqsave(&irq_lock, flags);
+	for (i = 0; i < 32; i++)
+		if (mask & (1 << i)) {
+			if (controller)
+				au1x_ic1_unmask(i + AU1000_INTC1_INT_BASE);
+			else
+				au1x_ic0_unmask(i + AU1000_INTC0_INT_BASE);
+		}
+
+	if (controller)
+		new_mask = au_readl(IC1_MASKSET);
+	else
+		new_mask = au_readl(IC0_MASKSET);
+
+	spin_unlock_irqrestore(&irq_lock, flags);
 }
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index bd854a6d1d8..33a3cdb7444 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -51,7 +51,6 @@ static void au1000_calibrate_delay(void);
 
 extern unsigned long save_local_and_disable(int controller);
 extern void restore_local_and_enable(int controller, unsigned long mask);
-extern void local_enable_irq(unsigned int irq_nr);
 
 static DEFINE_SPINLOCK(pm_lock);
 
@@ -364,7 +363,10 @@ static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
 	 */
 	intc0_mask = save_local_and_disable(0);
 	intc1_mask = save_local_and_disable(1);
-	local_enable_irq(AU1000_TOY_MATCH2_INT);
+	val = 1 << (AU1000_TOY_MATCH2_INT - AU1000_INTC0_INT_BASE);
+	au_writel(val, IC0_MASKSET);	/* unmask */
+	au_writel(val, IC0_WAKESET);	/* enable wake-from-sleep */
+	au_sync();
 	spin_unlock_irqrestore(&pm_lock, flags);
 	au1000_calibrate_delay();
 	restore_local_and_enable(0, intc0_mask);
diff --git a/arch/mips/alchemy/devboards/db1x00/irqmap.c b/arch/mips/alchemy/devboards/db1x00/irqmap.c
index 94c090e8bf7..0b09025087c 100644
--- a/arch/mips/alchemy/devboards/db1x00/irqmap.c
+++ b/arch/mips/alchemy/devboards/db1x00/irqmap.c
@@ -27,6 +27,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
 
@@ -66,21 +67,24 @@ struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 
 #ifndef CONFIG_MIPS_MIRAGE
 #ifdef CONFIG_MIPS_DB1550
-	{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
-	{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
+	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
+	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
 #else
-	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */
-	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */
-	{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
+	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
+	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
+	{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
 
-	{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */
-	{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */
-	{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
+	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
+	{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
+	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
 #endif
 #else
-	{ AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */
+	{ AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
 #endif
 
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c
index 889c8fda2ab..aed2fdecc70 100644
--- a/arch/mips/alchemy/devboards/pb1000/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c
@@ -32,11 +32,9 @@
 
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 },
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
-
 
 const char *get_system_type(void)
 {
@@ -47,6 +45,11 @@ void board_reset(void)
 {
 }
 
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
 void __init board_setup(void)
 {
 	u32 pin_func, static_cfg0;
diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c
index fbd211e1348..4df57fae15d 100644
--- a/arch/mips/alchemy/devboards/pb1100/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c
@@ -25,6 +25,7 @@
 
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1100.h>
@@ -33,14 +34,12 @@
 
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_9,  INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
-	{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
-	{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
-	{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
+	{ AU1000_GPIO_9,  IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */
+	{ AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */
+	{ AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */
+	{ AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
-
 
 const char *get_system_type(void)
 {
@@ -53,6 +52,11 @@ void board_reset(void)
 	au_writel(0x00000000, PB1100_RST_VDDI);
 }
 
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
 void __init board_setup(void)
 {
 	volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c
index b5585e46200..94e6b7e7753 100644
--- a/arch/mips/alchemy/devboards/pb1200/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c
@@ -30,8 +30,6 @@
 #include <prom.h>
 #include <au1xxx.h>
 
-extern void _board_init_irq(void);
-extern void (*board_init_irq)(void);
 
 const char *get_system_type(void)
 {
@@ -131,9 +129,6 @@ void __init board_setup(void)
 #ifdef CONFIG_MIPS_DB1200
 	printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
 #endif
-
-	/* Setup Pb1200 External Interrupt Controller */
-	board_init_irq = _board_init_irq;
 }
 
 int board_au1200fb_panel(void)
diff --git a/arch/mips/alchemy/devboards/pb1200/irqmap.c b/arch/mips/alchemy/devboards/pb1200/irqmap.c
index 2a505ad8715..1f92fec24a3 100644
--- a/arch/mips/alchemy/devboards/pb1200/irqmap.c
+++ b/arch/mips/alchemy/devboards/pb1200/irqmap.c
@@ -40,10 +40,9 @@
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 	/* This is external interrupt cascade */
-	{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
 
 /*
  * Support for External interrupts on the Pb1200 Development platform.
@@ -121,10 +120,12 @@ static struct irq_chip external_irq_type = {
 	.unmask   = pb1200_enable_irq,
 };
 
-void _board_init_irq(void)
+void __init board_init_irq(void)
 {
 	unsigned int irq;
 
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+
 #ifdef CONFIG_MIPS_PB1200
 	/* We have a problem with CPLD rev 3. */
 	if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c
index dcb36a66442..fed3b093156 100644
--- a/arch/mips/alchemy/devboards/pb1500/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c
@@ -25,6 +25,7 @@
 
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1500.h>
@@ -38,15 +39,13 @@ char irq_tab_alchemy[][5] __initdata = {
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
+	{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
-
 
 const char *get_system_type(void)
 {
@@ -59,6 +58,11 @@ void board_reset(void)
 	au_writel(0x00000000, PB1500_RST_VDDI);
 }
 
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
 void __init board_setup(void)
 {
 	u32 pin_func;
diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c
index f462652d762..b6e9e7d247a 100644
--- a/arch/mips/alchemy/devboards/pb1550/board_setup.c
+++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c
@@ -28,6 +28,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-pb1x00/pb1550.h>
@@ -41,13 +42,10 @@ char irq_tab_alchemy[][5] __initdata = {
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
+	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
-
-
 const char *get_system_type(void)
 {
 	return "Alchemy Pb1550";
@@ -59,6 +57,11 @@ void board_reset(void)
 	au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
 }
 
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
+
 void __init board_setup(void)
 {
 	u32 pin_func;
diff --git a/arch/mips/alchemy/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c
index f2bf02951e9..f1ab12ab343 100644
--- a/arch/mips/alchemy/mtx-1/irqmap.c
+++ b/arch/mips/alchemy/mtx-1/irqmap.c
@@ -27,7 +27,7 @@
  */
 
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <asm/mach-au1x00/au1000.h>
 
 char irq_tab_alchemy[][5] __initdata = {
@@ -42,11 +42,15 @@ char irq_tab_alchemy[][5] __initdata = {
 };
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-       { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
-       { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
-       { AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-       { AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-       { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
+       { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
+       { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
+       { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
+       { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
+       { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
diff --git a/arch/mips/alchemy/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c
index edf06ed1187..0f0f3012e5f 100644
--- a/arch/mips/alchemy/xxs1500/irqmap.c
+++ b/arch/mips/alchemy/xxs1500/irqmap.c
@@ -27,23 +27,26 @@
  */
 
 #include <linux/init.h>
-
+#include <linux/interrupt.h>
 #include <asm/mach-au1x00/au1000.h>
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
-	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
+	{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
+	{ AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 },
 
-	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */
-	{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
+	{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
+	{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
+	{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 },
+	{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 },
+	{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */
+	{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 },
 };
 
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
+void __init board_init_irq(void)
+{
+	au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
+}
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 0d302bad449..a7ba35247c8 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -109,10 +109,11 @@ struct au1xxx_irqmap {
 	int	im_request;
 };
 
-/*
- * init_IRQ looks for a table with this name.
- */
-extern struct au1xxx_irqmap au1xxx_irq_map[];
+/* core calls this function to let boards initialize other IRQ sources */
+void board_init_irq(void);
+
+/* boards call this to register additional (GPIO) interrupts */
+void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count);
 
 #endif /* !defined (_LANGUAGE_ASSEMBLY) */
 
@@ -505,15 +506,6 @@ extern struct au1xxx_irqmap au1xxx_irq_map[];
 
 #define IC1_TESTBIT		0xB1800080
 
-/* Interrupt Configuration Modes */
-#define INTC_INT_DISABLED		0x0
-#define INTC_INT_RISE_EDGE		0x1
-#define INTC_INT_FALL_EDGE		0x2
-#define INTC_INT_RISE_AND_FALL_EDGE	0x3
-#define INTC_INT_HIGH_LEVEL		0x5
-#define INTC_INT_LOW_LEVEL		0x6
-#define INTC_INT_HIGH_AND_LOW_LEVEL	0x7
-
 /* Interrupt Numbers */
 /* Au1000 */
 #ifdef CONFIG_SOC_AU1000
-- 
GitLab


From 197b0d31eb3e82f598bf13da6ee777d906c611f3 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:18 +0100
Subject: [PATCH 138/492] MIPS: Alchemy: pb1200: update CPLD cascade irq
 handler.

Tested on Db1200.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/devboards/pb1200/irqmap.c | 87 +++++++--------------
 1 file changed, 30 insertions(+), 57 deletions(-)

diff --git a/arch/mips/alchemy/devboards/pb1200/irqmap.c b/arch/mips/alchemy/devboards/pb1200/irqmap.c
index 1f92fec24a3..fe47498da28 100644
--- a/arch/mips/alchemy/devboards/pb1200/irqmap.c
+++ b/arch/mips/alchemy/devboards/pb1200/irqmap.c
@@ -47,77 +47,50 @@ struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
 /*
  * Support for External interrupts on the Pb1200 Development platform.
  */
-static volatile int pb1200_cascade_en;
 
-irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
+static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d)
 {
 	unsigned short bisr = bcsr->int_status;
-	int extirq_nr = 0;
-
-	/* Clear all the edge interrupts. This has no effect on level. */
-	bcsr->int_status = bisr;
-	for ( ; bisr; bisr &= bisr - 1) {
-		extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
-		/* Ack and dispatch IRQ */
-		do_IRQ(extirq_nr);
-	}
-
-	return IRQ_RETVAL(1);
-}
 
-inline void pb1200_enable_irq(unsigned int irq_nr)
-{
-	bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
-	bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
+	for ( ; bisr; bisr &= bisr - 1)
+		generic_handle_irq(PB1200_INT_BEGIN + __ffs(bisr));
 }
 
-inline void pb1200_disable_irq(unsigned int irq_nr)
+/* NOTE: both the enable and mask bits must be cleared, otherwise the
+ * CPLD generates tons of spurious interrupts (at least on the DB1200).
+ */
+static void pb1200_mask_irq(unsigned int irq_nr)
 {
 	bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
 	bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
+	au_sync();
 }
 
-static unsigned int pb1200_setup_cascade(void)
-{
-	return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
-			   0, "Pb1200 Cascade", &pb1200_cascade_handler);
-}
-
-static unsigned int pb1200_startup_irq(unsigned int irq)
+static void pb1200_maskack_irq(unsigned int irq_nr)
 {
-	if (++pb1200_cascade_en == 1) {
-		int res;
-
-		res = pb1200_setup_cascade();
-		if (res)
-			return res;
-	}
-
-	pb1200_enable_irq(irq);
-
-	return 0;
+	bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+	bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
+	bcsr->int_status = 1 << (irq_nr - PB1200_INT_BEGIN);	/* ack */
+	au_sync();
 }
 
-static void pb1200_shutdown_irq(unsigned int irq)
+static void pb1200_unmask_irq(unsigned int irq_nr)
 {
-	pb1200_disable_irq(irq);
-	if (--pb1200_cascade_en == 0)
-		free_irq(AU1000_GPIO_7, &pb1200_cascade_handler);
+	bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
+	bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+	au_sync();
 }
 
-static struct irq_chip external_irq_type = {
+static struct irq_chip pb1200_cpld_irq_type = {
 #ifdef CONFIG_MIPS_PB1200
 	.name = "Pb1200 Ext",
 #endif
 #ifdef CONFIG_MIPS_DB1200
 	.name = "Db1200 Ext",
 #endif
-	.startup  = pb1200_startup_irq,
-	.shutdown = pb1200_shutdown_irq,
-	.ack      = pb1200_disable_irq,
-	.mask     = pb1200_disable_irq,
-	.mask_ack = pb1200_disable_irq,
-	.unmask   = pb1200_enable_irq,
+	.mask		= pb1200_mask_irq,
+	.mask_ack	= pb1200_maskack_irq,
+	.unmask		= pb1200_unmask_irq,
 };
 
 void __init board_init_irq(void)
@@ -147,15 +120,15 @@ void __init board_init_irq(void)
 		panic("Game over.  Your score is 0.");
 	}
 #endif
+	/* mask & disable & ack all */
+	bcsr->intclr_mask = 0xffff;
+	bcsr->intclr = 0xffff;
+	bcsr->int_status = 0xffff;
+	au_sync();
 
-	for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) {
-		set_irq_chip_and_handler(irq, &external_irq_type,
-					 handle_level_irq);
-		pb1200_disable_irq(irq);
-	}
+	for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++)
+		set_irq_chip_and_handler_name(irq, &pb1200_cpld_irq_type,
+					 handle_level_irq, "level");
 
-	/*
-	 * GPIO_7 can not be hooked here, so it is hooked upon first
-	 * request of any source attached to the cascade.
-	 */
+	set_irq_chained_handler(AU1000_GPIO_7, pb1200_cascade_handler);
 }
-- 
GitLab


From 558d1de8ba9ebb1cc3f3062f1371b9330772164f Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:19 +0100
Subject: [PATCH 139/492] MIPS: Print irq handler description

Add the name set by set_irq_chip_and_handler_name() to the output of
/proc/interrupts, like so:

db1200 ~ # cat /proc/interrupts
           CPU0
  8:         52     Alchemy-IC0-hilevel   serial
 10:        171     Alchemy-IC0-hilevel   au1xxx-mmc
 11:         47     Alchemy-IC0-hilevel   Au1xxx dbdma
 18:          1     Alchemy-IC0-hilevel   au1550-spi
 29:    1250997     Alchemy-IC0-riseedge  timer
 37:        211     Alchemy-IC0-hilevel   ehci_hcd:usb1, ohci_hcd:usb2
 38:          0     Alchemy-IC0-hilevel   lcd
 72:       2623     DB1200 CPLD-level     ide0
 73:        257     DB1200 CPLD-level     eth0
 84:          1     DB1200 CPLD-level     sd_insert
 85:          0     DB1200 CPLD-level     sd_eject

ERR:          0

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/irq.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index 4b4007b3083..a0ff2b66e22 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -111,6 +111,7 @@ int show_interrupts(struct seq_file *p, void *v)
 			seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
 #endif
 		seq_printf(p, " %14s", irq_desc[i].chip->name);
+		seq_printf(p, "-%-8s", irq_desc[i].name);
 		seq_printf(p, "  %s", action->name);
 
 		for (action=action->next; action; action = action->next)
-- 
GitLab


From 1820ec1d2b993f3ec00169e881504aa4541a9bf7 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:20 +0100
Subject: [PATCH 140/492] MIPS: Alchemy: remove get/set_au1x00_lcd_clock().

There are no in-tree users, so remove them.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/clocks.c          | 31 ----------------------
 arch/mips/alchemy/common/time.c            |  1 -
 arch/mips/include/asm/mach-au1x00/au1000.h |  2 --
 3 files changed, 34 deletions(-)

diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index 043429d17c5..a8170fda493 100644
--- a/arch/mips/alchemy/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
@@ -30,7 +30,6 @@
 #include <asm/mach-au1x00/au1000.h>
 
 static unsigned int au1x00_clock; /*  Hz */
-static unsigned int lcd_clock;    /* KHz */
 static unsigned long uart_baud_base;
 
 /*
@@ -61,33 +60,3 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
 {
 	uart_baud_base = new_baud_base;
 }
-
-/*
- * Calculate the Au1x00's LCD clock based on the current
- * cpu clock and the system bus clock, and try to keep it
- * below 40 MHz (the Pb1000 board can lock-up if the LCD
- * clock is over 40 MHz).
- */
-void set_au1x00_lcd_clock(void)
-{
-	unsigned int static_cfg0;
-	unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
-				  ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
-
-	static_cfg0 = au_readl(MEM_STCFG0);
-
-	if (static_cfg0 & (1 << 11))
-		lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
-	else
-		lcd_clock = sys_busclk / 4;
-
-	if (lcd_clock > 50000) /* Epson MAX */
-		printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
-				    lcd_clock);
-}
-
-unsigned int get_au1x00_lcd_clock(void)
-{
-	return lcd_clock;
-}
-EXPORT_SYMBOL(get_au1x00_lcd_clock);
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 563d9390a87..68d714258e9 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -224,7 +224,6 @@ void __init plat_time_init(void)
 	printk(KERN_INFO "CPU frequency %u.%02u MHz\n",
 	       est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
 	set_au1x00_speed(est_freq);
-	set_au1x00_lcd_clock(); /* program the LCD clock */
 
 #ifdef CONFIG_PM
 	/*
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index a7ba35247c8..d07632e3230 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -97,8 +97,6 @@ extern void set_au1x00_speed(unsigned int new_freq);
 extern unsigned int get_au1x00_speed(void);
 extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
 extern unsigned long get_au1x00_uart_baud_base(void);
-extern void set_au1x00_lcd_clock(void);
-extern unsigned int get_au1x00_lcd_clock(void);
 
 /*
  * Every board describes its IRQ mapping with this table.
-- 
GitLab


From 074cf656700ddd1d2bd7f815f78e785418beb898 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:21 +0100
Subject: [PATCH 141/492] MIPS: Alchemy: remove cpu_table.

Remove the cpu_table:
- move detection of whether c0_config[OD] is read-only and should be set
  to fix various chip errata to au1000 headers.
- move detection of write-only sys_cpupll to au1000 headers.
- remove the BCLK switching code:  Activation of this features should be
  left to the boards using the chips since it also affects external devices
  tied to BCLK, and only the board designers know whether it is safe to
  enable.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 delete mode 100644 arch/mips/alchemy/common/cputable.c
---
 arch/mips/alchemy/common/Makefile          |  2 +-
 arch/mips/alchemy/common/cputable.c        | 52 -------------------
 arch/mips/alchemy/common/setup.c           | 26 +---------
 arch/mips/alchemy/common/time.c            |  4 +-
 arch/mips/include/asm/mach-au1x00/au1000.h | 58 ++++++++++++++--------
 5 files changed, 42 insertions(+), 100 deletions(-)
 delete mode 100644 arch/mips/alchemy/common/cputable.c

diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile
index 28b8aebb35e..d50d4764eaf 100644
--- a/arch/mips/alchemy/common/Makefile
+++ b/arch/mips/alchemy/common/Makefile
@@ -7,7 +7,7 @@
 
 obj-y += prom.o irq.o puts.o time.o reset.o \
 	clocks.o platform.o power.o setup.o \
-	sleeper.o cputable.o dma.o dbdma.o gpio.o
+	sleeper.o dma.o dbdma.o gpio.o
 
 obj-$(CONFIG_PCI)		+= pci.o
 
diff --git a/arch/mips/alchemy/common/cputable.c b/arch/mips/alchemy/common/cputable.c
deleted file mode 100644
index ba6430bc2d0..00000000000
--- a/arch/mips/alchemy/common/cputable.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- *  arch/mips/au1000/common/cputable.c
- *
- *  Copyright (C) 2004 Dan Malek (dan@embeddededge.com)
- *	Copied from PowerPC and updated for Alchemy Au1xxx processors.
- *
- *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <asm/mach-au1x00/au1000.h>
-
-struct cpu_spec *cur_cpu_spec[NR_CPUS];
-
-/* With some thought, we can probably use the mask to reduce the
- * size of the table.
- */
-struct cpu_spec cpu_specs[] = {
-	{ 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
-	{ 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
-	{ 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
-	{ 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
-	{ 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
-	{ 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
-	{ 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
-	{ 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
-	{ 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
-	{ 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
-	{ 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
-	{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
-	{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
-	{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
-	{ 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
-	{ 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
-	{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
-};
-
-void set_cpuspec(void)
-{
-	struct	cpu_spec *sp;
-	u32	prid;
-
-	prid = read_c0_prid();
-	sp = cpu_specs;
-	while ((prid & sp->prid_mask) != sp->prid_value)
-		sp++;
-	cur_cpu_spec[0] = sp;
-}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 9889ec3ba4c..4d42be811e7 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -44,37 +44,13 @@ extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)
 {
-	struct	cpu_spec *sp;
-	unsigned long prid, cpufreq, bclk;
-
-	set_cpuspec();
-	sp = cur_cpu_spec[0];
-
 	_machine_restart = au1000_restart;
 	_machine_halt = au1000_halt;
 	pm_power_off = au1000_power_off;
 
 	board_setup();  /* board specific setup */
 
-	prid = read_c0_prid();
-	if (sp->cpu_pll_wo)
-#ifdef CONFIG_SOC_AU1000_FREQUENCY
-		cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
-#else
-		cpufreq = 396;
-#endif
-	else
-		cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
-	printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
-
-	if (sp->cpu_bclk) {
-		/* Enable BCLK switching */
-		bclk = au_readl(SYS_POWERCTRL);
-		au_writel(bclk | 0x60, SYS_POWERCTRL);
-		printk(KERN_INFO "BCLK switching enabled!\n");
-	}
-
-	if (sp->cpu_od)
+	if (au1xxx_cpu_needs_config_od())
 		/* Various early Au1xx0 errata corrected by this */
 		set_c0_config(1 << 19); /* Set Config[OD] */
 	else
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 68d714258e9..15185708ad8 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -198,7 +198,7 @@ unsigned long calc_clock(void)
 	 * silicon versions of Au1000 are not sold by AMD, we don't bend
 	 * over backwards trying to determine the frequency.
 	 */
-	if (cur_cpu_spec[0]->cpu_pll_wo)
+	if (au1xxx_cpu_has_pll_wo())
 #ifdef CONFIG_SOC_AU1000_FREQUENCY
 		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
 #else
@@ -221,7 +221,7 @@ void __init plat_time_init(void)
 
 	est_freq += 5000;    /* round */
 	est_freq -= est_freq%10000;
-	printk(KERN_INFO "CPU frequency %u.%02u MHz\n",
+	printk(KERN_INFO "(PRId %08x) @ %u.%02u MHz\n", read_c0_prid(),
 	       est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
 	set_au1x00_speed(est_freq);
 
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index d07632e3230..5db26e60a8c 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -91,6 +91,44 @@ static inline u32 au_readl(unsigned long reg)
 	return *(volatile u32 *)reg;
 }
 
+/* Early Au1000 have a write-only SYS_CPUPLL register. */
+static inline int au1xxx_cpu_has_pll_wo(void)
+{
+	switch (read_c0_prid()) {
+	case 0x00030100:	/* Au1000 DA */
+	case 0x00030201:	/* Au1000 HA */
+	case 0x00030202:	/* Au1000 HB */
+		return 1;
+	}
+	return 0;
+}
+
+/* does CPU need CONFIG[OD] set to fix tons of errata? */
+static inline int au1xxx_cpu_needs_config_od(void)
+{
+	/*
+	 * c0_config.od (bit 19) was write only (and read as 0) on the
+	 * early revisions of Alchemy SOCs.  It disables the bus trans-
+	 * action overlapping and needs to be set to fix various errata.
+	 */
+	switch (read_c0_prid()) {
+	case 0x00030100: /* Au1000 DA */
+	case 0x00030201: /* Au1000 HA */
+	case 0x00030202: /* Au1000 HB */
+	case 0x01030200: /* Au1500 AB */
+	/*
+	 * Au1100/Au1200 errata actually keep silence about this bit,
+	 * so we set it just in case for those revisions that require
+	 * it to be set according to the (now gone) cpu_table.
+	 */
+	case 0x02030200: /* Au1100 AB */
+	case 0x02030201: /* Au1100 BA */
+	case 0x02030202: /* Au1100 BC */
+	case 0x04030201: /* Au1200 AC */
+		return 1;
+	}
+	return 0;
+}
 
 /* arch/mips/au1000/common/clocks.c */
 extern void set_au1x00_speed(unsigned int new_freq);
@@ -1739,24 +1777,4 @@ static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE;
 
 #endif
 
-/*
- * Processor information based on PRID.
- * Copied from PowerPC.
- */
-#ifndef _LANGUAGE_ASSEMBLY
-struct cpu_spec {
-	/* CPU is matched via (PRID & prid_mask) == prid_value */
-	unsigned int	prid_mask;
-	unsigned int	prid_value;
-
-	char		*cpu_name;
-	unsigned char	cpu_od;		/* Set Config[OD] */
-	unsigned char	cpu_bclk;	/* Enable BCLK switching */
-	unsigned char	cpu_pll_wo;	/* sys_cpupll reg. write-only */
-};
-
-extern struct cpu_spec	cpu_specs[];
-extern struct cpu_spec	*cur_cpu_spec[];
-#endif
-
 #endif
-- 
GitLab


From 779e7d41ad004946603da139da99ba775f74cb1c Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:22 +0100
Subject: [PATCH 142/492] MIPS: make cp0 counter clocksource/event usable as
 fallback.

The current mips clock build infrastructure lets a system only use
either the MIPS cp0 counter or a SoC specific timer as a clocksource /
clockevent device.

This patch renames the core cp0 counter clocksource / clockevent functions
from mips_* to r4k_* and updates the wrappers in asm-mips/time.h to
call these renamed functions instead.

Chips which can detect whether it is safe to use a chip-specific timer
can now fall back on the cp0 counter if necessary and possible
(e.g. Alchemy with a follow-on patch).

Existing behaviour is not changed in any way.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig            |  8 ++++++++
 arch/mips/include/asm/time.h | 24 ++++++++++++++++--------
 arch/mips/kernel/Makefile    |  4 ++--
 arch/mips/kernel/cevt-r4k.c  |  2 +-
 arch/mips/kernel/csrc-r4k.c  |  2 +-
 5 files changed, 28 insertions(+), 12 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 424ff744d07..52c80c2a57f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -721,7 +721,11 @@ config CEVT_DS1287
 config CEVT_GT641XX
 	bool
 
+config CEVT_R4K_LIB
+	bool
+
 config CEVT_R4K
+	select CEVT_R4K_LIB
 	bool
 
 config CEVT_SB1250
@@ -736,7 +740,11 @@ config CSRC_BCM1480
 config CSRC_IOASIC
 	bool
 
+config CSRC_R4K_LIB
+	bool
+
 config CSRC_R4K
+	select CSRC_R4K_LIB
 	bool
 
 config CSRC_SB1250
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index 9601ea95054..38a30d2ee95 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -50,27 +50,35 @@ extern int (*perf_irq)(void);
 /*
  * Initialize the calling CPU's compare interrupt as clockevent device
  */
-#ifdef CONFIG_CEVT_R4K
-extern int mips_clockevent_init(void);
+#ifdef CONFIG_CEVT_R4K_LIB
 extern unsigned int __weak get_c0_compare_int(void);
-#else
+extern int r4k_clockevent_init(void);
+#endif
+
 static inline int mips_clockevent_init(void)
 {
+#ifdef CONFIG_CEVT_R4K
+	return r4k_clockevent_init();
+#else
 	return -ENXIO;
-}
 #endif
+}
 
 /*
  * Initialize the count register as a clocksource
  */
-#ifdef CONFIG_CSRC_R4K
-extern int init_mips_clocksource(void);
-#else
+#ifdef CONFIG_CSRC_R4K_LIB
+extern int init_r4k_clocksource(void);
+#endif
+
 static inline int init_mips_clocksource(void)
 {
+#ifdef CONFIG_CSRC_R4K
+	return init_r4k_clocksource();
+#else
 	return 0;
-}
 #endif
+}
 
 extern void clocksource_set_clock(struct clocksource *cs, unsigned int clock);
 extern void clockevent_set_clock(struct clock_event_device *cd,
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 3ab4ac971fc..e9612215992 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -9,7 +9,7 @@ obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
 		   time.o topology.o traps.o unaligned.o watch.o
 
 obj-$(CONFIG_CEVT_BCM1480)	+= cevt-bcm1480.o
-obj-$(CONFIG_CEVT_R4K)		+= cevt-r4k.o
+obj-$(CONFIG_CEVT_R4K_LIB)	+= cevt-r4k.o
 obj-$(CONFIG_MIPS_MT_SMTC)	+= cevt-smtc.o
 obj-$(CONFIG_CEVT_DS1287)	+= cevt-ds1287.o
 obj-$(CONFIG_CEVT_GT641XX)	+= cevt-gt641xx.o
@@ -17,7 +17,7 @@ obj-$(CONFIG_CEVT_SB1250)	+= cevt-sb1250.o
 obj-$(CONFIG_CEVT_TXX9)		+= cevt-txx9.o
 obj-$(CONFIG_CSRC_BCM1480)	+= csrc-bcm1480.o
 obj-$(CONFIG_CSRC_IOASIC)	+= csrc-ioasic.o
-obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
+obj-$(CONFIG_CSRC_R4K_LIB)	+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
 obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
 
diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
index e1ec83b6803..0015e442572 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
@@ -160,7 +160,7 @@ int c0_compare_int_usable(void)
 
 #ifndef CONFIG_MIPS_MT_SMTC
 
-int __cpuinit mips_clockevent_init(void)
+int __cpuinit r4k_clockevent_init(void)
 {
 	uint64_t mips_freq = mips_hpt_frequency;
 	unsigned int cpu = smp_processor_id();
diff --git a/arch/mips/kernel/csrc-r4k.c b/arch/mips/kernel/csrc-r4k.c
index 74fb74583b4..f1a2893931e 100644
--- a/arch/mips/kernel/csrc-r4k.c
+++ b/arch/mips/kernel/csrc-r4k.c
@@ -22,7 +22,7 @@ static struct clocksource clocksource_mips = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-int __init init_mips_clocksource(void)
+int __init init_r4k_clocksource(void)
 {
 	if (!cpu_has_counter || !mips_hpt_frequency)
 		return -ENXIO;
-- 
GitLab


From 0c694de12b54fa96b9555e07603f567906ce21c8 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:23 +0100
Subject: [PATCH 143/492] MIPS: Alchemy: RTC counter clocksource / clockevent
 support.

Add support for the 32 kHz counter1 (RTC) as clocksource / clockevent
device.  As a nice side effect, this also enables use of the 'wait'
instruction for runtime idle power savings.

If the counters aren't enabled/working properly, fall back on the
cp0 counter clock code.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/Kconfig        |   4 +-
 arch/mips/alchemy/common/power.c |  16 +-
 arch/mips/alchemy/common/setup.c |   6 -
 arch/mips/alchemy/common/time.c  | 292 +++++++++++++------------------
 arch/mips/kernel/cpu-probe.c     |   6 +-
 5 files changed, 143 insertions(+), 181 deletions(-)

diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig
index 4397d94f327..7f8ef13d001 100644
--- a/arch/mips/alchemy/Kconfig
+++ b/arch/mips/alchemy/Kconfig
@@ -128,8 +128,8 @@ config SOC_AU1200
 config SOC_AU1X00
 	bool
 	select 64BIT_PHYS_ADDR
-	select CEVT_R4K
-	select CSRC_R4K
+	select CEVT_R4K_LIB
+	select CSRC_R4K_LIB
 	select IRQ_CPU
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 33a3cdb7444..997dd56bcc5 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -85,7 +85,11 @@ static unsigned int	sleep_static_memctlr[4][3];
 #define SLEEP_TEST_TIMEOUT 1
 #ifdef	SLEEP_TEST_TIMEOUT
 static int sleep_ticks;
-void wakeup_counter0_set(int ticks);
+static void wakeup_counter0_set(int ticks)
+{
+	au_writel(au_readl(SYS_TOYREAD) + ticks, SYS_TOYMATCH2);
+	au_sync();
+}
 #endif
 
 static void save_core_regs(void)
@@ -183,7 +187,6 @@ static void restore_core_regs(void)
 	}
 
 	restore_au1xxx_intctl();
-	wakeup_counter0_adjust();
 }
 
 unsigned long suspend_mode;
@@ -411,6 +414,15 @@ static struct ctl_table pm_dir_table[] = {
  */
 static int __init pm_init(void)
 {
+	/* init TOY to tick at 1Hz. No need to wait for access bits
+	 * since there's plenty of time between here and the first
+	 * suspend cycle.
+	 */
+	if (au_readl(SYS_TOYTRIM) != 32767) {
+		au_writel(32767, SYS_TOYTRIM);
+		au_sync();
+	}
+
 	register_sysctl_table(pm_dir_table);
 	return 0;
 }
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 4d42be811e7..8ad453af2c6 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -63,12 +63,6 @@ void __init plat_mem_setup(void)
 	ioport_resource.end = IOPORT_RESOURCE_END;
 	iomem_resource.start = IOMEM_RESOURCE_START;
 	iomem_resource.end = IOMEM_RESOURCE_END;
-
-	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S);
-	au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL);
-	au_sync();
-	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
-	au_writel(0, SYS_TOYTRIM);
 }
 
 #if defined(CONFIG_64BIT_PHYS_ADDR)
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 15185708ad8..57f0aec590b 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -1,5 +1,7 @@
 /*
+ * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
  *
+ * Previous incarnations were:
  * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
  * Copied and modified Carsten Langgaard's time.c
  *
@@ -23,131 +25,27 @@
  *
  * ########################################################################
  *
- * Setting up the clock on the MIPS boards.
- *
- * We provide the clock interrupt processing and the timer offset compute
- * functions.  If CONFIG_PM is selected, we also ensure the 32KHz timer is
- * available.  -- Dan
+ * Clocksource/event using the 32.768kHz-clocked Counter1 ('RTC' in the
+ * databooks).  Firmware/Board init code must enable the counters in the
+ * counter control register, otherwise the CP0 counter clocksource/event
+ * will be installed instead (and use of 'wait' instruction is prohibited).
  */
 
-#include <linux/types.h>
-#include <linux/init.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
 #include <linux/spinlock.h>
 
-#include <asm/mipsregs.h>
 #include <asm/time.h>
 #include <asm/mach-au1x00/au1000.h>
 
-static int no_au1xxx_32khz;
-extern int allow_au1k_wait; /* default off for CP0 Counter */
+/* 32kHz clock enabled and detected */
+#define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
 
-#ifdef CONFIG_PM
-#if HZ < 100 || HZ > 1000
-#error "unsupported HZ value! Must be in [100,1000]"
-#endif
-#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */
-static unsigned long last_pc0, last_match20;
-#endif
+extern int allow_au1k_wait; /* default off for CP0 Counter */
 
 static DEFINE_SPINLOCK(time_lock);
 
-unsigned long wtimer;
-
-#ifdef CONFIG_PM
-static irqreturn_t counter0_irq(int irq, void *dev_id)
-{
-	unsigned long pc0;
-	int time_elapsed;
-	static int jiffie_drift;
-
-	if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
-		/* should never happen! */
-		printk(KERN_WARNING "counter 0 w status error\n");
-		return IRQ_NONE;
-	}
-
-	pc0 = au_readl(SYS_TOYREAD);
-	if (pc0 < last_match20)
-		/* counter overflowed */
-		time_elapsed = (0xffffffff - last_match20) + pc0;
-	else
-		time_elapsed = pc0 - last_match20;
-
-	while (time_elapsed > 0) {
-		do_timer(1);
-#ifndef CONFIG_SMP
-		update_process_times(user_mode(get_irq_regs()));
-#endif
-		time_elapsed -= MATCH20_INC;
-		last_match20 += MATCH20_INC;
-		jiffie_drift++;
-	}
-
-	last_pc0 = pc0;
-	au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
-	au_sync();
-
-	/*
-	 * Our counter ticks at 10.009765625 ms/tick, we we're running
-	 * almost 10 uS too slow per tick.
-	 */
-
-	if (jiffie_drift >= 999) {
-		jiffie_drift -= 999;
-		do_timer(1); /* increment jiffies by one */
-#ifndef CONFIG_SMP
-		update_process_times(user_mode(get_irq_regs()));
-#endif
-	}
-
-	return IRQ_HANDLED;
-}
-
-struct irqaction counter0_action = {
-	.handler	= counter0_irq,
-	.flags		= IRQF_DISABLED,
-	.name		= "alchemy-toy",
-	.dev_id		= NULL,
-};
-
-/* When we wakeup from sleep, we have to "catch up" on all of the
- * timer ticks we have missed.
- */
-void wakeup_counter0_adjust(void)
-{
-	unsigned long pc0;
-	int time_elapsed;
-
-	pc0 = au_readl(SYS_TOYREAD);
-	if (pc0 < last_match20)
-		/* counter overflowed */
-		time_elapsed = (0xffffffff - last_match20) + pc0;
-	else
-		time_elapsed = pc0 - last_match20;
-
-	while (time_elapsed > 0) {
-		time_elapsed -= MATCH20_INC;
-		last_match20 += MATCH20_INC;
-	}
-
-	last_pc0 = pc0;
-	au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
-	au_sync();
-
-}
-
-/* This is just for debugging to set the timer for a sleep delay. */
-void wakeup_counter0_set(int ticks)
-{
-	unsigned long pc0;
-
-	pc0 = au_readl(SYS_TOYREAD);
-	last_pc0 = pc0;
-	au_writel(last_match20 + (MATCH20_INC * ticks), SYS_TOYMATCH2);
-	au_sync();
-}
-#endif
-
 /*
  * I haven't found anyone that doesn't use a 12 MHz source clock,
  * but just in case.....
@@ -162,37 +60,15 @@ void wakeup_counter0_set(int ticks)
  * this advertised speed will introduce error and sometimes not work
  * properly.  This function is futher convoluted to still allow configurations
  * to do that in case they have really, really old silicon with a
- * write-only PLL register, that we need the 32 KHz when power management
- * "wait" is enabled, and we need to detect if the 32 KHz isn't present
- * but requested......got it? :-)		-- Dan
+ * write-only PLL register.			-- Dan
  */
 unsigned long calc_clock(void)
 {
 	unsigned long cpu_speed;
 	unsigned long flags;
-	unsigned long counter;
 
 	spin_lock_irqsave(&time_lock, flags);
 
-	/* Power management cares if we don't have a 32 KHz counter. */
-	no_au1xxx_32khz = 0;
-	counter = au_readl(SYS_COUNTER_CNTRL);
-	if (counter & SYS_CNTRL_E0) {
-		int trim_divide = 16;
-
-		au_writel(counter | SYS_CNTRL_EN1, SYS_COUNTER_CNTRL);
-
-		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
-		/* RTC now ticks at 32.768/16 kHz */
-		au_writel(trim_divide - 1, SYS_RTCTRIM);
-		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
-
-		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
-		au_writel(0, SYS_TOYWRITE);
-		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
-	} else
-		no_au1xxx_32khz = 1;
-
 	/*
 	 * On early Au1000, sys_cpupll was write-only. Since these
 	 * silicon versions of Au1000 are not sold by AMD, we don't bend
@@ -215,8 +91,65 @@ unsigned long calc_clock(void)
 	return cpu_speed;
 }
 
+static cycle_t au1x_counter1_read(void)
+{
+	return au_readl(SYS_RTCREAD);
+}
+
+static struct clocksource au1x_counter1_clocksource = {
+	.name		= "alchemy-counter1",
+	.read		= au1x_counter1_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.rating		= 100,
+};
+
+static int au1x_rtcmatch2_set_next_event(unsigned long delta,
+					 struct clock_event_device *cd)
+{
+	delta += au_readl(SYS_RTCREAD);
+	/* wait for register access */
+	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M21)
+		;
+	au_writel(delta, SYS_RTCMATCH2);
+	au_sync();
+
+	return 0;
+}
+
+static void au1x_rtcmatch2_set_mode(enum clock_event_mode mode,
+				    struct clock_event_device *cd)
+{
+}
+
+static irqreturn_t au1x_rtcmatch2_irq(int irq, void *dev_id)
+{
+	struct clock_event_device *cd = dev_id;
+	cd->event_handler(cd);
+	return IRQ_HANDLED;
+}
+
+static struct clock_event_device au1x_rtcmatch2_clockdev = {
+	.name		= "rtcmatch2",
+	.features	= CLOCK_EVT_FEAT_ONESHOT,
+	.rating		= 100,
+	.irq		= AU1000_RTC_MATCH2_INT,
+	.set_next_event	= au1x_rtcmatch2_set_next_event,
+	.set_mode	= au1x_rtcmatch2_set_mode,
+	.cpumask	= CPU_MASK_ALL,
+};
+
+static struct irqaction au1x_rtcmatch2_irqaction = {
+	.handler	= au1x_rtcmatch2_irq,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
+	.name		= "timer",
+	.dev_id		= &au1x_rtcmatch2_clockdev,
+};
+
 void __init plat_time_init(void)
 {
+	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
+	unsigned long t;
 	unsigned int est_freq = calc_clock();
 
 	est_freq += 5000;    /* round */
@@ -225,41 +158,62 @@ void __init plat_time_init(void)
 	       est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
 	set_au1x00_speed(est_freq);
 
-#ifdef CONFIG_PM
-	/*
-	 * setup counter 0, since it keeps ticking after a
-	 * 'wait' instruction has been executed. The CP0 timer and
-	 * counter 1 do NOT continue running after 'wait'
-	 *
-	 * It's too early to call request_irq() here, so we handle
-	 * counter 0 interrupt as a special irq and it doesn't show
-	 * up under /proc/interrupts.
-	 *
-	 * Check to ensure we really have a 32 KHz oscillator before
-	 * we do this.
+	/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
+	 * has been detected.  If so install the rtcmatch2 clocksource,
+	 * otherwise don't bother.  Note that both bits being set is by
+	 * no means a definite guarantee that the counters actually work
+	 * (the 32S bit seems to be stuck set to 1 once a single clock-
+	 * edge is detected, hence the timeouts).
 	 */
-	if (no_au1xxx_32khz)
-		printk(KERN_WARNING "WARNING: no 32KHz clock found.\n");
-	else {
-		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
-		au_writel(0, SYS_TOYWRITE);
-		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
+	if (CNTR_OK != (au_readl(SYS_COUNTER_CNTRL) & CNTR_OK))
+		goto cntr_err;
 
-		au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK);
-		au_writel(~0, SYS_WAKESRC);
-		au_sync();
-		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
+	/*
+	 * setup counter 1 (RTC) to tick at full speed
+	 */
+	t = 0xffffff;
+	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--)
+		asm volatile ("nop");
+	if (!t)
+		goto cntr_err;
 
-		/* Setup match20 to interrupt once every HZ */
-		last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
-		au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
-		au_sync();
-		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
-		setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action);
+	au_writel(0, SYS_RTCTRIM);	/* 32.768 kHz */
+	au_sync();
 
-		/* We can use the real 'wait' instruction. */
-		allow_au1k_wait = 1;
-	}
+	t = 0xffffff;
+	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+		asm volatile ("nop");
+	if (!t)
+		goto cntr_err;
+	au_writel(0, SYS_RTCWRITE);
+	au_sync();
 
-#endif
+	t = 0xffffff;
+	while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
+		asm volatile ("nop");
+	if (!t)
+		goto cntr_err;
+
+	/* register counter1 clocksource and event device */
+	clocksource_set_clock(&au1x_counter1_clocksource, 32768);
+	clocksource_register(&au1x_counter1_clocksource);
+
+	cd->shift = 32;
+	cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
+	cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
+	cd->min_delta_ns = clockevent_delta2ns(8, cd);	/* ~0.25ms */
+	clockevents_register_device(cd);
+	setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction);
+
+	printk(KERN_INFO "Alchemy clocksource installed\n");
+
+	/* can now use 'wait' */
+	allow_au1k_wait = 1;
+	return;
+
+cntr_err:
+	/* counters unusable, use C0 counter */
+	r4k_clockevent_init();
+	init_r4k_clocksource();
+	allow_au1k_wait = 0;
 }
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index 6b3c63dd181..a7162a4484c 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -96,6 +96,9 @@ int allow_au1k_wait;
 
 static void au1k_wait(void)
 {
+	if (!allow_au1k_wait)
+		return;
+
 	/* using the wait instruction makes CP0 counter unusable */
 	__asm__("	.set	mips3			\n"
 		"	cache	0x14, 0(%0)		\n"
@@ -186,8 +189,7 @@ void __init check_wait(void)
 	case CPU_AU1200:
 	case CPU_AU1210:
 	case CPU_AU1250:
-		if (allow_au1k_wait)
-			cpu_wait = au1k_wait;
+		cpu_wait = au1k_wait;
 		break;
 	case CPU_20KC:
 		/*
-- 
GitLab


From 2699cdfb765c3b7d77d28ea3bc7d84e486697177 Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:24 +0100
Subject: [PATCH 144/492] MIPS: Alchemy: move calc_clock function.

Now that nothing in time.c depends on calc_clock, it can
be moved to clocks.c where it belongs.
While at it, give it a better non-generic name and call it
as soon as possible in plat_mem_init.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/clocks.c          | 54 ++++++++++++++++++++++
 arch/mips/alchemy/common/setup.c           |  9 ++++
 arch/mips/alchemy/common/time.c            | 54 ----------------------
 arch/mips/include/asm/mach-au1x00/au1000.h |  1 +
 4 files changed, 64 insertions(+), 54 deletions(-)

diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c
index a8170fda493..d8991854530 100644
--- a/arch/mips/alchemy/common/clocks.c
+++ b/arch/mips/alchemy/common/clocks.c
@@ -27,11 +27,21 @@
  */
 
 #include <linux/module.h>
+#include <linux/spinlock.h>
+#include <asm/time.h>
 #include <asm/mach-au1x00/au1000.h>
 
+/*
+ * I haven't found anyone that doesn't use a 12 MHz source clock,
+ * but just in case.....
+ */
+#define AU1000_SRC_CLK	12000000
+
 static unsigned int au1x00_clock; /*  Hz */
 static unsigned long uart_baud_base;
 
+static DEFINE_SPINLOCK(time_lock);
+
 /*
  * Set the au1000_clock
  */
@@ -60,3 +70,47 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
 {
 	uart_baud_base = new_baud_base;
 }
+
+/*
+ * We read the real processor speed from the PLL.  This is important
+ * because it is more accurate than computing it from the 32 KHz
+ * counter, if it exists.  If we don't have an accurate processor
+ * speed, all of the peripherals that derive their clocks based on
+ * this advertised speed will introduce error and sometimes not work
+ * properly.  This function is futher convoluted to still allow configurations
+ * to do that in case they have really, really old silicon with a
+ * write-only PLL register.			-- Dan
+ */
+unsigned long au1xxx_calc_clock(void)
+{
+	unsigned long cpu_speed;
+	unsigned long flags;
+
+	spin_lock_irqsave(&time_lock, flags);
+
+	/*
+	 * On early Au1000, sys_cpupll was write-only. Since these
+	 * silicon versions of Au1000 are not sold by AMD, we don't bend
+	 * over backwards trying to determine the frequency.
+	 */
+	if (au1xxx_cpu_has_pll_wo())
+#ifdef CONFIG_SOC_AU1000_FREQUENCY
+		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
+#else
+		cpu_speed = 396000000;
+#endif
+	else
+		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
+
+	/* On Alchemy CPU:counter ratio is 1:1 */
+	mips_hpt_frequency = cpu_speed;
+	/* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
+	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
+							  & 0x03) + 2) * 16));
+
+	spin_unlock_irqrestore(&time_lock, flags);
+
+	set_au1x00_speed(cpu_speed);
+
+	return cpu_speed;
+}
diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c
index 8ad453af2c6..3f036b3d400 100644
--- a/arch/mips/alchemy/common/setup.c
+++ b/arch/mips/alchemy/common/setup.c
@@ -44,6 +44,15 @@ extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)
 {
+	unsigned long est_freq;
+
+	/* determine core clock */
+	est_freq = au1xxx_calc_clock();
+	est_freq += 5000;    /* round */
+	est_freq -= est_freq % 10000;
+	printk(KERN_INFO "(PRId %08x) @ %lu.%02lu MHz\n", read_c0_prid(),
+	       est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
+
 	_machine_restart = au1000_restart;
 	_machine_halt = au1000_halt;
 	pm_power_off = au1000_power_off;
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index 57f0aec590b..32880146cbc 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -44,53 +44,6 @@
 
 extern int allow_au1k_wait; /* default off for CP0 Counter */
 
-static DEFINE_SPINLOCK(time_lock);
-
-/*
- * I haven't found anyone that doesn't use a 12 MHz source clock,
- * but just in case.....
- */
-#define AU1000_SRC_CLK	12000000
-
-/*
- * We read the real processor speed from the PLL.  This is important
- * because it is more accurate than computing it from the 32 KHz
- * counter, if it exists.  If we don't have an accurate processor
- * speed, all of the peripherals that derive their clocks based on
- * this advertised speed will introduce error and sometimes not work
- * properly.  This function is futher convoluted to still allow configurations
- * to do that in case they have really, really old silicon with a
- * write-only PLL register.			-- Dan
- */
-unsigned long calc_clock(void)
-{
-	unsigned long cpu_speed;
-	unsigned long flags;
-
-	spin_lock_irqsave(&time_lock, flags);
-
-	/*
-	 * On early Au1000, sys_cpupll was write-only. Since these
-	 * silicon versions of Au1000 are not sold by AMD, we don't bend
-	 * over backwards trying to determine the frequency.
-	 */
-	if (au1xxx_cpu_has_pll_wo())
-#ifdef CONFIG_SOC_AU1000_FREQUENCY
-		cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
-#else
-		cpu_speed = 396000000;
-#endif
-	else
-		cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
-	/* On Alchemy CPU:counter ratio is 1:1 */
-	mips_hpt_frequency = cpu_speed;
-	/* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
-	set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
-							  & 0x03) + 2) * 16));
-	spin_unlock_irqrestore(&time_lock, flags);
-	return cpu_speed;
-}
-
 static cycle_t au1x_counter1_read(void)
 {
 	return au_readl(SYS_RTCREAD);
@@ -150,13 +103,6 @@ void __init plat_time_init(void)
 {
 	struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
 	unsigned long t;
-	unsigned int est_freq = calc_clock();
-
-	est_freq += 5000;    /* round */
-	est_freq -= est_freq%10000;
-	printk(KERN_INFO "(PRId %08x) @ %u.%02u MHz\n", read_c0_prid(),
-	       est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
-	set_au1x00_speed(est_freq);
 
 	/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
 	 * has been detected.  If so install the rtcmatch2 clocksource,
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 5db26e60a8c..2b88c2982cb 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -135,6 +135,7 @@ extern void set_au1x00_speed(unsigned int new_freq);
 extern unsigned int get_au1x00_speed(void);
 extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
 extern unsigned long get_au1x00_uart_baud_base(void);
+extern unsigned long au1xxx_calc_clock(void);
 
 /*
  * Every board describes its IRQ mapping with this table.
-- 
GitLab


From 564365b0fc3395ed55501ef25705664888cebdbc Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:25 +0100
Subject: [PATCH 145/492] MIPS: Alchemy: Fix up PM code on Au1550/Au1200

Au1550/Au1200 have a different memory controller which requires additi-
onal code to properly put memory to sleep (code taken from AMD/RMI's
Linux-2.6.11 source package).

Also fix up the remaining pm-related paths to compile on Au1200/Au1550
platforms.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/power.c           | 266 ++++++++++++---------
 arch/mips/alchemy/common/reset.c           |   2 -
 arch/mips/alchemy/common/sleeper.S         | 118 +++++----
 arch/mips/include/asm/mach-au1x00/au1000.h |   6 +
 4 files changed, 225 insertions(+), 167 deletions(-)

diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index 997dd56bcc5..f08312b10d0 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -35,7 +35,6 @@
 #include <linux/jiffies.h>
 
 #include <asm/uaccess.h>
-#include <asm/cacheflush.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #ifdef CONFIG_PM
@@ -47,8 +46,6 @@
 #define DPRINTK(fmt, args...)
 #endif
 
-static void au1000_calibrate_delay(void);
-
 extern unsigned long save_local_and_disable(int controller);
 extern void restore_local_and_enable(int controller, unsigned long mask);
 
@@ -64,17 +61,15 @@ static DEFINE_SPINLOCK(pm_lock);
  * We only have to save/restore registers that aren't otherwise
  * done as part of a driver pm_* function.
  */
-static unsigned int	sleep_aux_pll_cntrl;
-static unsigned int	sleep_cpu_pll_cntrl;
-static unsigned int	sleep_pin_function;
-static unsigned int	sleep_uart0_inten;
-static unsigned int	sleep_uart0_fifoctl;
-static unsigned int	sleep_uart0_linectl;
-static unsigned int	sleep_uart0_clkdiv;
-static unsigned int	sleep_uart0_enable;
-static unsigned int	sleep_usbhost_enable;
-static unsigned int	sleep_usbdev_enable;
-static unsigned int	sleep_static_memctlr[4][3];
+static unsigned int sleep_uart0_inten;
+static unsigned int sleep_uart0_fifoctl;
+static unsigned int sleep_uart0_linectl;
+static unsigned int sleep_uart0_clkdiv;
+static unsigned int sleep_uart0_enable;
+static unsigned int sleep_usb[2];
+static unsigned int sleep_sys_clocks[5];
+static unsigned int sleep_sys_pinfunc;
+static unsigned int sleep_static_memctlr[4][3];
 
 /*
  * Define this to cause the value you write to /proc/sys/pm/sleep to
@@ -108,31 +103,45 @@ static void save_core_regs(void)
 	sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
 	sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
 	sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
+	au_sync();
 
+#ifndef CONFIG_SOC_AU1200
 	/* Shutdown USB host/device. */
-	sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
+	sleep_usb[0] = au_readl(USB_HOST_CONFIG);
 
 	/* There appears to be some undocumented reset register.... */
-	au_writel(0, 0xb0100004); au_sync();
-	au_writel(0, USB_HOST_CONFIG); au_sync();
+	au_writel(0, 0xb0100004);
+	au_sync();
+	au_writel(0, USB_HOST_CONFIG);
+	au_sync();
+
+	sleep_usb[1] = au_readl(USBD_ENABLE);
+	au_writel(0, USBD_ENABLE);
+	au_sync();
+
+#else	/* AU1200 */
 
-	sleep_usbdev_enable = au_readl(USBD_ENABLE);
-	au_writel(0, USBD_ENABLE); au_sync();
+	/* enable access to OTG mmio so we can save OTG CAP/MUX.
+	 * FIXME: write an OTG driver and move this stuff there!
+	 */
+	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
+	au_sync();
+	sleep_usb[0] = au_readl(0xb4020020);	/* OTG_CAP */
+	sleep_usb[1] = au_readl(0xb4020024);	/* OTG_MUX */
+#endif
 
 	/* Save interrupt controller state. */
 	save_au1xxx_intctl();
 
 	/* Clocks and PLLs. */
-	sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
+	sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
+	sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
+	sleep_sys_clocks[2] = au_readl(SYS_CLKSRC);
+	sleep_sys_clocks[3] = au_readl(SYS_CPUPLL);
+	sleep_sys_clocks[4] = au_readl(SYS_AUXPLL);
 
-	/*
-	 * We don't really need to do this one, but unless we
-	 * write it again it won't have a valid value if we
-	 * happen to read it.
-	 */
-	sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL);
-
-	sleep_pin_function = au_readl(SYS_PINFUNC);
+	/* pin mux config */
+	sleep_sys_pinfunc = au_readl(SYS_PINFUNC);
 
 	/* Save the static memory controller configuration. */
 	sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
@@ -151,12 +160,37 @@ static void save_core_regs(void)
 
 static void restore_core_regs(void)
 {
-	extern void restore_au1xxx_intctl(void);
-	extern void wakeup_counter0_adjust(void);
+	/* restore clock configuration.  Writing CPUPLL last will
+	 * stall a bit and stabilize other clocks (unless this is
+	 * one of those Au1000 with a write-only PLL, where we dont
+	 * have a valid value)
+	 */
+	au_writel(sleep_sys_clocks[0], SYS_FREQCTRL0);
+	au_writel(sleep_sys_clocks[1], SYS_FREQCTRL1);
+	au_writel(sleep_sys_clocks[2], SYS_CLKSRC);
+	au_writel(sleep_sys_clocks[4], SYS_AUXPLL);
+	if (!au1xxx_cpu_has_pll_wo())
+		au_writel(sleep_sys_clocks[3], SYS_CPUPLL);
+	au_sync();
+
+	au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
+	au_sync();
+
+#ifndef CONFIG_SOC_AU1200
+	au_writel(sleep_usb[0], USB_HOST_CONFIG);
+	au_writel(sleep_usb[1], USBD_ENABLE);
+	au_sync();
+#else
+	/* enable accces to OTG memory */
+	au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
+	au_sync();
 
-	au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync();
-	au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
-	au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
+	/* restore OTG caps and port mux. */
+	au_writel(sleep_usb[0], 0xb4020020 + 0);	/* OTG_CAP */
+	au_sync();
+	au_writel(sleep_usb[1], 0xb4020020 + 4);	/* OTG_MUX */
+	au_sync();
+#endif
 
 	/* Restore the static memory controller configuration. */
 	au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
@@ -196,16 +230,45 @@ void wakeup_from_suspend(void)
 	suspend_mode = 0;
 }
 
-int au_sleep(void)
+void au_sleep(void)
+{
+	save_core_regs();
+	au1xxx_save_and_sleep();
+	restore_core_regs();
+}
+
+static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
+		       void __user *buffer, size_t *len, loff_t *ppos)
 {
 	unsigned long wakeup, flags;
-	extern void save_and_sleep(void);
+	int ret;
+#ifdef SLEEP_TEST_TIMEOUT
+#define TMPBUFLEN2 16
+	char buf[TMPBUFLEN2], *p;
+#endif
 
 	spin_lock_irqsave(&pm_lock, flags);
 
-	save_core_regs();
+	if (!write) {
+		*len = 0;
+		ret = 0;
+		goto out_unlock;
+	};
 
-	flush_cache_all();
+#ifdef SLEEP_TEST_TIMEOUT
+	if (*len > TMPBUFLEN2 - 1) {
+		ret = -EFAULT;
+		goto out_unlock;
+	}
+	if (copy_from_user(buf, buffer, *len)) {
+		return -EFAULT;
+		goto out_unlock;
+	}
+	buf[*len] = 0;
+	p = buf;
+	sleep_ticks = simple_strtoul(p, &p, 0);
+	wakeup_counter0_set(sleep_ticks);
+#endif
 
 	/**
 	 ** The code below is all system dependent and we should probably
@@ -223,9 +286,6 @@ int au_sleep(void)
 	wakeup |= 1 << 6;	/* turn on  GPIO  6 wakeup */
 #else
 	/* For testing, allow match20 to wake us up. */
-#ifdef SLEEP_TEST_TIMEOUT
-	wakeup_counter0_set(sleep_ticks);
-#endif
 	wakeup = 1 << 8;	/* turn on match20 wakeup   */
 	wakeup = 0;
 #endif
@@ -234,41 +294,62 @@ int au_sleep(void)
 	au_writel(wakeup, SYS_WAKEMSK);
 	au_sync();
 
-	save_and_sleep();
+	au_sleep();
+	ret = 0;
 
-	/*
-	 * After a wakeup, the cpu vectors back to 0x1fc00000, so
-	 * it's up to the boot code to get us back here.
-	 */
-	restore_core_regs();
+out_unlock:
 	spin_unlock_irqrestore(&pm_lock, flags);
-	return 0;
+	return ret;
 }
 
-static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
-		       void __user *buffer, size_t *len, loff_t *ppos)
+#if !defined(CONFIG_SOC_AU1200) && !defined(CONFIG_SOC_AU1550)
+
+/*
+ * This is right out of init/main.c
+ */
+
+/*
+ * This is the number of bits of precision for the loops_per_jiffy.
+ * Each bit takes on average 1.5/HZ seconds.  This (like the original)
+ * is a little better than 1%.
+ */
+#define LPS_PREC 8
+
+static void au1000_calibrate_delay(void)
 {
-#ifdef SLEEP_TEST_TIMEOUT
-#define TMPBUFLEN2 16
-	char buf[TMPBUFLEN2], *p;
-#endif
+	unsigned long ticks, loopbit;
+	int lps_precision = LPS_PREC;
 
-	if (!write)
-		*len = 0;
-	else {
-#ifdef SLEEP_TEST_TIMEOUT
-		if (*len > TMPBUFLEN2 - 1)
-			return -EFAULT;
-		if (copy_from_user(buf, buffer, *len))
-			return -EFAULT;
-		buf[*len] = 0;
-		p = buf;
-		sleep_ticks = simple_strtoul(p, &p, 0);
-#endif
+	loops_per_jiffy = 1 << 12;
 
-		au_sleep();
+	while (loops_per_jiffy <<= 1) {
+		/* Wait for "start of" clock tick */
+		ticks = jiffies;
+		while (ticks == jiffies)
+			/* nothing */ ;
+		/* Go ... */
+		ticks = jiffies;
+		__delay(loops_per_jiffy);
+		ticks = jiffies - ticks;
+		if (ticks)
+			break;
+	}
+
+	/*
+	 * Do a binary approximation to get loops_per_jiffy set to be equal
+	 * one clock (up to lps_precision bits)
+	 */
+	loops_per_jiffy >>= 1;
+	loopbit = loops_per_jiffy;
+	while (lps_precision-- && (loopbit >>= 1)) {
+		loops_per_jiffy |= loopbit;
+		ticks = jiffies;
+		while (ticks == jiffies);
+		ticks = jiffies;
+		__delay(loops_per_jiffy);
+		if (jiffies != ticks)	/* longer than 1 tick */
+			loops_per_jiffy &= ~loopbit;
 	}
-	return 0;
 }
 
 static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
@@ -377,7 +458,7 @@ static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
 
 	return retval;
 }
-
+#endif
 
 static struct ctl_table pm_table[] = {
 	{
@@ -388,6 +469,7 @@ static struct ctl_table pm_table[] = {
 		.mode		= 0600,
 		.proc_handler	= &pm_do_sleep
 	},
+#if !defined(CONFIG_SOC_AU1200) && !defined(CONFIG_SOC_AU1550)
 	{
 		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "freq",
@@ -396,6 +478,7 @@ static struct ctl_table pm_table[] = {
 		.mode		= 0600,
 		.proc_handler	= &pm_do_freq
 	},
+#endif
 	{}
 };
 
@@ -429,51 +512,4 @@ static int __init pm_init(void)
 
 __initcall(pm_init);
 
-/*
- * This is right out of init/main.c
- */
-
-/*
- * This is the number of bits of precision for the loops_per_jiffy.
- * Each bit takes on average 1.5/HZ seconds.  This (like the original)
- * is a little better than 1%.
- */
-#define LPS_PREC 8
-
-static void au1000_calibrate_delay(void)
-{
-	unsigned long ticks, loopbit;
-	int lps_precision = LPS_PREC;
-
-	loops_per_jiffy = 1 << 12;
-
-	while (loops_per_jiffy <<= 1) {
-		/* Wait for "start of" clock tick */
-		ticks = jiffies;
-		while (ticks == jiffies)
-			/* nothing */ ;
-		/* Go ... */
-		ticks = jiffies;
-		__delay(loops_per_jiffy);
-		ticks = jiffies - ticks;
-		if (ticks)
-			break;
-	}
-
-	/*
-	 * Do a binary approximation to get loops_per_jiffy set to be equal
-	 * one clock (up to lps_precision bits)
-	 */
-	loops_per_jiffy >>= 1;
-	loopbit = loops_per_jiffy;
-	while (lps_precision-- && (loopbit >>= 1)) {
-		loops_per_jiffy |= loopbit;
-		ticks = jiffies;
-		while (ticks == jiffies);
-		ticks = jiffies;
-		__delay(loops_per_jiffy);
-		if (jiffies != ticks)	/* longer than 1 tick */
-			loops_per_jiffy &= ~loopbit;
-	}
-}
 #endif	/* CONFIG_PM */
diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c
index d555429c8d6..0191c936cb5 100644
--- a/arch/mips/alchemy/common/reset.c
+++ b/arch/mips/alchemy/common/reset.c
@@ -31,8 +31,6 @@
 
 #include <asm/mach-au1x00/au1000.h>
 
-extern int au_sleep(void);
-
 void au1000_restart(char *command)
 {
 	/* Set all integrated peripherals to disabled states */
diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S
index 3006e270c8b..4f4b16741d1 100644
--- a/arch/mips/alchemy/common/sleeper.S
+++ b/arch/mips/alchemy/common/sleeper.S
@@ -15,16 +15,17 @@
 #include <asm/regdef.h>
 #include <asm/stackframe.h>
 
+	.extern __flush_cache_all
+
 	.text
-	.set	macro
-	.set	noat
+	.set noreorder
+	.set noat
 	.align	5
 
 /* Save all of the processor general registers and go to sleep.
  * A wakeup condition will get us back here to restore the registers.
  */
-LEAF(save_and_sleep)
-
+LEAF(au1xxx_save_and_sleep)
 	subu	sp, PT_SIZE
 	sw	$1, PT_R1(sp)
 	sw	$2, PT_R2(sp)
@@ -33,14 +34,6 @@ LEAF(save_and_sleep)
 	sw	$5, PT_R5(sp)
 	sw	$6, PT_R6(sp)
 	sw	$7, PT_R7(sp)
-	sw	$8, PT_R8(sp)
-	sw	$9, PT_R9(sp)
-	sw	$10, PT_R10(sp)
-	sw	$11, PT_R11(sp)
-	sw	$12, PT_R12(sp)
-	sw	$13, PT_R13(sp)
-	sw	$14, PT_R14(sp)
-	sw	$15, PT_R15(sp)
 	sw	$16, PT_R16(sp)
 	sw	$17, PT_R17(sp)
 	sw	$18, PT_R18(sp)
@@ -49,12 +42,9 @@ LEAF(save_and_sleep)
 	sw	$21, PT_R21(sp)
 	sw	$22, PT_R22(sp)
 	sw	$23, PT_R23(sp)
-	sw	$24, PT_R24(sp)
-	sw	$25, PT_R25(sp)
 	sw	$26, PT_R26(sp)
 	sw	$27, PT_R27(sp)
 	sw	$28, PT_R28(sp)
-	sw	$29, PT_R29(sp)
 	sw	$30, PT_R30(sp)
 	sw	$31, PT_R31(sp)
 	mfc0	k0, CP0_STATUS
@@ -66,20 +56,26 @@ LEAF(save_and_sleep)
 	mfc0	k0, CP0_CONFIG
 	sw	k0, 0x14(sp)
 
+	/* flush caches to make sure context is in memory */
+	la	t1, __flush_cache_all
+	lw	t0, 0(t1)
+	jalr	t0
+	 nop
+
 	/* Now set up the scratch registers so the boot rom will
 	 * return to this point upon wakeup.
+	 * sys_scratch0 : SP
+	 * sys_scratch1 : RA
 	 */
-	la	k0, 1f
-	lui	k1, 0xb190
-	ori	k1, 0x18
-	sw	sp, 0(k1)
-	ori 	k1, 0x1c
-	sw	k0, 0(k1)
+	lui	t3, 0xb190		/* sys_xxx */
+	sw	sp, 0x0018(t3)
+	la	k0, 3f			/* resume path */
+	sw	k0, 0x001c(t3)
 
-/* Put SDRAM into self refresh.  Preload instructions into cache,
- * issue a precharge, then auto refresh, then sleep commands to it.
- */
-	la	t0, sdsleep
+	/* Put SDRAM into self refresh:  Preload instructions into cache,
+	 * issue a precharge, auto/self refresh, then sleep commands to it.
+	 */
+	la	t0, 1f
 	.set	mips3
 	cache	0x14, 0(t0)
 	cache	0x14, 32(t0)
@@ -87,24 +83,57 @@ LEAF(save_and_sleep)
 	cache	0x14, 96(t0)
 	.set	mips0
 
-sdsleep:
-	lui 	k0, 0xb400
-	sw	zero, 0x001c(k0)	/* Precharge */
-	sw	zero, 0x0020(k0)	/* Auto refresh */
-	sw	zero, 0x0030(k0)	/* SDRAM sleep */
+1:	lui 	a0, 0xb400		/* mem_xxx */
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) ||	\
+    defined(CONFIG_SOC_AU1500)
+	sw	zero, 0x001c(a0) 	/* Precharge */
+	sync
+	sw	zero, 0x0020(a0)	/* Auto Refresh */
+	sync
+	sw	zero, 0x0030(a0)  	/* Sleep */
+	sync
+#endif
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+	sw	zero, 0x08c0(a0) 	/* Precharge */
 	sync
+	sw	zero, 0x08d0(a0)	/* Self Refresh */
+	sync
+
+	/* wait for sdram to enter self-refresh mode */
+	lui 	t0, 0x0100
+2:	lw 	t1, 0x0850(a0)		/* mem_sdstat */
+	and	t2, t1, t0
+	beq	t2, zero, 2b
+	 nop
 
-	lui 	k1, 0xb190
-	sw	zero, 0x0078(k1)	/* get ready  to sleep */
+	/* disable SDRAM clocks */
+	lui	t0, 0xcfff
+	ori	t0, t0, 0xffff
+	lw 	t1, 0x0840(a0)		/* mem_sdconfiga */
+	and 	t1, t0, t1		/* clear CE[1:0] */
+	sw 	t1, 0x0840(a0)		/* mem_sdconfiga */
 	sync
-	sw	zero, 0x007c(k1)	/* Put processor to sleep */
+#endif
+
+	/* put power supply and processor to sleep */
+	sw	zero, 0x0078(t3)	/* sys_slppwr */
+	sync
+	sw	zero, 0x007c(t3)	/* sys_sleep */
 	sync
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
 
 	/* This is where we return upon wakeup.
 	 * Reload all of the registers and return.
 	 */
-1:	nop
-	lw	k0, 0x20(sp)
+3:	lw	k0, 0x20(sp)
 	mtc0	k0, CP0_STATUS
 	lw	k0, 0x1c(sp)
 	mtc0	k0, CP0_CONTEXT
@@ -113,10 +142,11 @@ sdsleep:
 	lw	k0, 0x14(sp)
 	mtc0	k0, CP0_CONFIG
 
-	/* We need to catch the ealry Alchemy SOCs with
+	/* We need to catch the early Alchemy SOCs with
 	 * the write-only Config[OD] bit and set it back to one...
 	 */
 	jal	au1x00_fixup_config_od
+	 nop
 	lw	$1, PT_R1(sp)
 	lw	$2, PT_R2(sp)
 	lw	$3, PT_R3(sp)
@@ -124,14 +154,6 @@ sdsleep:
 	lw	$5, PT_R5(sp)
 	lw	$6, PT_R6(sp)
 	lw	$7, PT_R7(sp)
-	lw	$8, PT_R8(sp)
-	lw	$9, PT_R9(sp)
-	lw	$10, PT_R10(sp)
-	lw	$11, PT_R11(sp)
-	lw	$12, PT_R12(sp)
-	lw	$13, PT_R13(sp)
-	lw	$14, PT_R14(sp)
-	lw	$15, PT_R15(sp)
 	lw	$16, PT_R16(sp)
 	lw	$17, PT_R17(sp)
 	lw	$18, PT_R18(sp)
@@ -140,15 +162,11 @@ sdsleep:
 	lw	$21, PT_R21(sp)
 	lw	$22, PT_R22(sp)
 	lw	$23, PT_R23(sp)
-	lw	$24, PT_R24(sp)
-	lw	$25, PT_R25(sp)
 	lw	$26, PT_R26(sp)
 	lw	$27, PT_R27(sp)
 	lw	$28, PT_R28(sp)
-	lw	$29, PT_R29(sp)
 	lw	$30, PT_R30(sp)
 	lw	$31, PT_R31(sp)
-	addiu	sp, PT_SIZE
-
 	jr	ra
-END(save_and_sleep)
+	 addiu	sp, PT_SIZE
+END(au1xxx_save_and_sleep)
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 2b88c2982cb..515373c6d4a 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -137,6 +137,12 @@ extern void set_au1x00_uart_baud_base(unsigned long new_baud_base);
 extern unsigned long get_au1x00_uart_baud_base(void);
 extern unsigned long au1xxx_calc_clock(void);
 
+/* PM: arch/mips/alchemy/common/sleeper.S, power.c, irq.c */
+void au1xxx_save_and_sleep(void);
+void au_sleep(void);
+void save_au1xxx_intctl(void);
+void restore_au1xxx_intctl(void);
+
 /*
  * Every board describes its IRQ mapping with this table.
  */
-- 
GitLab


From ac15dad061d351281b0bafbae1ecdd84e601435a Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:26 +0100
Subject: [PATCH 146/492] MIPS: Alchemy: dbdma suspend/resume support.

Implement suspend/resume for DBDMA controller and its channels.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/alchemy/common/dbdma.c              | 65 +++++++++++++++++++
 arch/mips/alchemy/common/power.c              | 11 ++++
 .../include/asm/mach-au1x00/au1xxx_dbdma.h    |  5 ++
 3 files changed, 81 insertions(+)

diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 601ee9180ee..3ab6d80d150 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -174,6 +174,11 @@ static dbdev_tab_t dbdev_tab[] = {
 
 #define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
 
+#ifdef CONFIG_PM
+static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8];
+#endif
+
+
 static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
 
 static dbdev_tab_t *find_dbdev_id(u32 id)
@@ -975,4 +980,64 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 	return nbytes;
 }
 
+#ifdef CONFIG_PM
+void au1xxx_dbdma_suspend(void)
+{
+	int i;
+	u32 addr;
+
+	addr = DDMA_GLOBAL_BASE;
+	au1xxx_dbdma_pm_regs[0][0] = au_readl(addr + 0x00);
+	au1xxx_dbdma_pm_regs[0][1] = au_readl(addr + 0x04);
+	au1xxx_dbdma_pm_regs[0][2] = au_readl(addr + 0x08);
+	au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
+
+	/* save channel configurations */
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+		au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
+		au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
+		au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
+		au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
+		au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
+		au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
+		au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18);
+
+		/* halt channel */
+		au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
+		au_sync();
+		while (!(au_readl(addr + 0x14) & 1))
+			au_sync();
+
+		addr += 0x100;	/* next channel base */
+	}
+	/* disable channel interrupts */
+	au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
+	au_sync();
+}
+
+void au1xxx_dbdma_resume(void)
+{
+	int i;
+	u32 addr;
+
+	addr = DDMA_GLOBAL_BASE;
+	au_writel(au1xxx_dbdma_pm_regs[0][0], addr + 0x00);
+	au_writel(au1xxx_dbdma_pm_regs[0][1], addr + 0x04);
+	au_writel(au1xxx_dbdma_pm_regs[0][2], addr + 0x08);
+	au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
+
+	/* restore channel configurations */
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+		au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
+		au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
+		au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
+		au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
+		au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
+		au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
+		au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18);
+		au_sync();
+		addr += 0x100;	/* next channel base */
+	}
+}
+#endif	/* CONFIG_PM */
 #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index f08312b10d0..f58e151b38d 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -36,6 +36,9 @@
 
 #include <asm/uaccess.h>
 #include <asm/mach-au1x00/au1000.h>
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+#endif
 
 #ifdef CONFIG_PM
 
@@ -156,6 +159,10 @@ static void save_core_regs(void)
 	sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
 	sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
 	sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+	au1xxx_dbdma_suspend();
+#endif
 }
 
 static void restore_core_regs(void)
@@ -221,6 +228,10 @@ static void restore_core_regs(void)
 	}
 
 	restore_au1xxx_intctl();
+
+#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
+	au1xxx_dbdma_resume();
+#endif
 }
 
 unsigned long suspend_mode;
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
index 44a67bf05dc..06f68f43800 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h
@@ -357,6 +357,11 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
 u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
 extern void au1xxx_ddma_del_device(u32 devid);
 void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+#ifdef CONFIG_PM
+void au1xxx_dbdma_suspend(void);
+void au1xxx_dbdma_resume(void);
+#endif
+
 
 /*
  * Some compatibilty macros -- needed to make changes to API
-- 
GitLab


From 61f9c58da57a80b0df1ced18a28cbbaebd4d417a Mon Sep 17 00:00:00 2001
From: Manuel Lauss <mano@roarinelk.homelinux.net>
Date: Sun, 21 Dec 2008 09:26:27 +0100
Subject: [PATCH 147/492] MIPS: Alchemy: new userspace suspend interface for
 development boards.

Replace the current sysctl-based suspend interface with a new sysfs-
based one which also uses the Linux-2.6 suspend model.

To configure wakeup sources, a subtree for the demoboards is created
under /sys/power/db1x:

sys/
`-- power
    `-- db1x
        |-- gpio0
        |-- gpio1
        |-- gpio2
        |-- gpio3
        |-- gpio4
        |-- gpio5
        |-- gpio6
        |-- gpio7
        |-- timer
        |-- timer_timeout
        |-- wakemsk
        `-- wakesrc

The nodes 'gpio[0-7]' and 'timer' configure the GPIO0..7 and M2
bits of the SYS_WAKEMSK (wakeup source enable) register.  Writing '1'
enables a wakesource, 0 disables it.

The 'timer_timeout' node holds the timeout in seconds after which the
TOYMATCH2 event should wake the system.

The 'wakesrc' node holds the SYS_WAKESRC register after wakeup (in hex),
the 'wakemsk' node can be used to get/set the wakeup mask directly.

For example, to have the timer wake the system after 10 seconds of sleep,
the following must be done in userspace:

echo 10 > /sys/power/db1x/timer_timeout
echo 1 > /sys/power/db1x/timer
echo mem > /sys/power/sleep

This patch also removes the homebrew CPU frequency switching code.  I don't
understand how it could have ever worked reliably; it does not communicate
the clock changes to peripheral devices other than uarts.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 arch/mips/alchemy/devboards/pm.c
---
 arch/mips/alchemy/common/irq.c             |  44 ---
 arch/mips/alchemy/common/power.c           | 309 ---------------------
 arch/mips/alchemy/devboards/Makefile       |   1 +
 arch/mips/alchemy/devboards/pm.c           | 229 +++++++++++++++
 arch/mips/include/asm/mach-au1x00/au1000.h |   4 +
 5 files changed, 234 insertions(+), 353 deletions(-)
 create mode 100644 arch/mips/alchemy/devboards/pm.c

diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c
index c54384779fb..c88c821b4c3 100644
--- a/arch/mips/alchemy/common/irq.c
+++ b/arch/mips/alchemy/common/irq.c
@@ -37,8 +37,6 @@
 #include <asm/mach-pb1x00/pb1000.h>
 #endif
 
-static DEFINE_SPINLOCK(irq_lock);
-
 static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
 
 /* per-processor fixed function irqs */
@@ -611,45 +609,3 @@ void __init arch_init_irq(void)
 
 	set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
 }
-
-unsigned long save_local_and_disable(int controller)
-{
-	int i;
-	unsigned long flags, mask;
-
-	spin_lock_irqsave(&irq_lock, flags);
-	if (controller) {
-		mask = au_readl(IC1_MASKSET);
-		for (i = 0; i < 32; i++)
-			au1x_ic1_mask(i + AU1000_INTC1_INT_BASE);
-	} else {
-		mask = au_readl(IC0_MASKSET);
-		for (i = 0; i < 32; i++)
-			au1x_ic0_mask(i + AU1000_INTC0_INT_BASE);
-	}
-	spin_unlock_irqrestore(&irq_lock, flags);
-
-	return mask;
-}
-
-void restore_local_and_enable(int controller, unsigned long mask)
-{
-	int i;
-	unsigned long flags, new_mask;
-
-	spin_lock_irqsave(&irq_lock, flags);
-	for (i = 0; i < 32; i++)
-		if (mask & (1 << i)) {
-			if (controller)
-				au1x_ic1_unmask(i + AU1000_INTC1_INT_BASE);
-			else
-				au1x_ic0_unmask(i + AU1000_INTC0_INT_BASE);
-		}
-
-	if (controller)
-		new_mask = au_readl(IC1_MASKSET);
-	else
-		new_mask = au_readl(IC0_MASKSET);
-
-	spin_unlock_irqrestore(&irq_lock, flags);
-}
diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c
index f58e151b38d..6ab7b42aa1b 100644
--- a/arch/mips/alchemy/common/power.c
+++ b/arch/mips/alchemy/common/power.c
@@ -42,18 +42,6 @@
 
 #ifdef CONFIG_PM
 
-#define DEBUG 1
-#ifdef	DEBUG
-#define DPRINTK(fmt, args...)	printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
-#else
-#define DPRINTK(fmt, args...)
-#endif
-
-extern unsigned long save_local_and_disable(int controller);
-extern void restore_local_and_enable(int controller, unsigned long mask);
-
-static DEFINE_SPINLOCK(pm_lock);
-
 /*
  * We need to save/restore a bunch of core registers that are
  * either volatile or reset to some state across a processor sleep.
@@ -74,21 +62,6 @@ static unsigned int sleep_sys_clocks[5];
 static unsigned int sleep_sys_pinfunc;
 static unsigned int sleep_static_memctlr[4][3];
 
-/*
- * Define this to cause the value you write to /proc/sys/pm/sleep to
- * set the TOY timer for the amount of time you want to sleep.
- * This is done mainly for testing, but may be useful in other cases.
- * The value is number of 32KHz ticks to sleep.
- */
-#define SLEEP_TEST_TIMEOUT 1
-#ifdef	SLEEP_TEST_TIMEOUT
-static int sleep_ticks;
-static void wakeup_counter0_set(int ticks)
-{
-	au_writel(au_readl(SYS_TOYREAD) + ticks, SYS_TOYMATCH2);
-	au_sync();
-}
-#endif
 
 static void save_core_regs(void)
 {
@@ -234,13 +207,6 @@ static void restore_core_regs(void)
 #endif
 }
 
-unsigned long suspend_mode;
-
-void wakeup_from_suspend(void)
-{
-	suspend_mode = 0;
-}
-
 void au_sleep(void)
 {
 	save_core_regs();
@@ -248,279 +214,4 @@ void au_sleep(void)
 	restore_core_regs();
 }
 
-static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
-		       void __user *buffer, size_t *len, loff_t *ppos)
-{
-	unsigned long wakeup, flags;
-	int ret;
-#ifdef SLEEP_TEST_TIMEOUT
-#define TMPBUFLEN2 16
-	char buf[TMPBUFLEN2], *p;
-#endif
-
-	spin_lock_irqsave(&pm_lock, flags);
-
-	if (!write) {
-		*len = 0;
-		ret = 0;
-		goto out_unlock;
-	};
-
-#ifdef SLEEP_TEST_TIMEOUT
-	if (*len > TMPBUFLEN2 - 1) {
-		ret = -EFAULT;
-		goto out_unlock;
-	}
-	if (copy_from_user(buf, buffer, *len)) {
-		return -EFAULT;
-		goto out_unlock;
-	}
-	buf[*len] = 0;
-	p = buf;
-	sleep_ticks = simple_strtoul(p, &p, 0);
-	wakeup_counter0_set(sleep_ticks);
-#endif
-
-	/**
-	 ** The code below is all system dependent and we should probably
-	 ** have a function call out of here to set this up.  You need
-	 ** to configure the GPIO or timer interrupts that will bring
-	 ** you out of sleep.
-	 ** For testing, the TOY counter wakeup is useful.
-	 **/
-#if 0
-	au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
-
-	/* GPIO 6 can cause a wake up event */
-	wakeup = au_readl(SYS_WAKEMSK);
-	wakeup &= ~(1 << 8);	/* turn off match20 wakeup */
-	wakeup |= 1 << 6;	/* turn on  GPIO  6 wakeup */
-#else
-	/* For testing, allow match20 to wake us up. */
-	wakeup = 1 << 8;	/* turn on match20 wakeup   */
-	wakeup = 0;
-#endif
-	au_writel(1, SYS_WAKESRC);	/* clear cause */
-	au_sync();
-	au_writel(wakeup, SYS_WAKEMSK);
-	au_sync();
-
-	au_sleep();
-	ret = 0;
-
-out_unlock:
-	spin_unlock_irqrestore(&pm_lock, flags);
-	return ret;
-}
-
-#if !defined(CONFIG_SOC_AU1200) && !defined(CONFIG_SOC_AU1550)
-
-/*
- * This is right out of init/main.c
- */
-
-/*
- * This is the number of bits of precision for the loops_per_jiffy.
- * Each bit takes on average 1.5/HZ seconds.  This (like the original)
- * is a little better than 1%.
- */
-#define LPS_PREC 8
-
-static void au1000_calibrate_delay(void)
-{
-	unsigned long ticks, loopbit;
-	int lps_precision = LPS_PREC;
-
-	loops_per_jiffy = 1 << 12;
-
-	while (loops_per_jiffy <<= 1) {
-		/* Wait for "start of" clock tick */
-		ticks = jiffies;
-		while (ticks == jiffies)
-			/* nothing */ ;
-		/* Go ... */
-		ticks = jiffies;
-		__delay(loops_per_jiffy);
-		ticks = jiffies - ticks;
-		if (ticks)
-			break;
-	}
-
-	/*
-	 * Do a binary approximation to get loops_per_jiffy set to be equal
-	 * one clock (up to lps_precision bits)
-	 */
-	loops_per_jiffy >>= 1;
-	loopbit = loops_per_jiffy;
-	while (lps_precision-- && (loopbit >>= 1)) {
-		loops_per_jiffy |= loopbit;
-		ticks = jiffies;
-		while (ticks == jiffies);
-		ticks = jiffies;
-		__delay(loops_per_jiffy);
-		if (jiffies != ticks)	/* longer than 1 tick */
-			loops_per_jiffy &= ~loopbit;
-	}
-}
-
-static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
-		      void __user *buffer, size_t *len, loff_t *ppos)
-{
-	int retval = 0, i;
-	unsigned long val, pll;
-#define TMPBUFLEN 64
-#define MAX_CPU_FREQ 396
-	char buf[TMPBUFLEN], *p;
-	unsigned long flags, intc0_mask, intc1_mask;
-	unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh;
-	unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
-	unsigned long baud_rate;
-
-	spin_lock_irqsave(&pm_lock, flags);
-	if (!write)
-		*len = 0;
-	else {
-		/* Parse the new frequency */
-		if (*len > TMPBUFLEN - 1) {
-			spin_unlock_irqrestore(&pm_lock, flags);
-			return -EFAULT;
-		}
-		if (copy_from_user(buf, buffer, *len)) {
-			spin_unlock_irqrestore(&pm_lock, flags);
-			return -EFAULT;
-		}
-		buf[*len] = 0;
-		p = buf;
-		val = simple_strtoul(p, &p, 0);
-		if (val > MAX_CPU_FREQ) {
-			spin_unlock_irqrestore(&pm_lock, flags);
-			return -EFAULT;
-		}
-
-		pll = val / 12;
-		if ((pll > 33) || (pll < 7)) {	/* 396 MHz max, 84 MHz min */
-			/* Revisit this for higher speed CPUs */
-			spin_unlock_irqrestore(&pm_lock, flags);
-			return -EFAULT;
-		}
-
-		old_baud_base = get_au1x00_uart_baud_base();
-		old_cpu_freq = get_au1x00_speed();
-
-		new_cpu_freq = pll * 12 * 1000000;
-	        new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)
-							    & 0x03) + 2) * 16));
-		set_au1x00_speed(new_cpu_freq);
-		set_au1x00_uart_baud_base(new_baud_base);
-
-		old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
-		new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) |
-			      (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
-
-		au_writel(pll, SYS_CPUPLL);
-		au_sync_delay(1);
-		au_writel(new_refresh, MEM_SDREFCFG);
-		au_sync_delay(1);
-
-		for (i = 0; i < 4; i++)
-			if (au_readl(UART_BASE + UART_MOD_CNTRL +
-				     i * 0x00100000) == 3) {
-				old_clk = au_readl(UART_BASE + UART_CLK +
-						   i * 0x00100000);
-				baud_rate = old_baud_base / old_clk;
-				/*
-				 * We won't get an exact baud rate and the error
-				 * could be significant enough that our new
-				 * calculation will result in a clock that will
-				 * give us a baud rate that's too far off from
-				 * what we really want.
-				 */
-				if (baud_rate > 100000)
-					baud_rate = 115200;
-				else if (baud_rate > 50000)
-					baud_rate = 57600;
-				else if (baud_rate > 30000)
-					baud_rate = 38400;
-				else if (baud_rate > 17000)
-					baud_rate = 19200;
-				else
-					baud_rate = 9600;
-				new_clk = new_baud_base / baud_rate;
-				au_writel(new_clk, UART_BASE + UART_CLK +
-					  i * 0x00100000);
-				au_sync_delay(10);
-			}
-	}
-
-	/*
-	 * We don't want _any_ interrupts other than match20. Otherwise our
-	 * au1000_calibrate_delay() calculation will be off, potentially a lot.
-	 */
-	intc0_mask = save_local_and_disable(0);
-	intc1_mask = save_local_and_disable(1);
-	val = 1 << (AU1000_TOY_MATCH2_INT - AU1000_INTC0_INT_BASE);
-	au_writel(val, IC0_MASKSET);	/* unmask */
-	au_writel(val, IC0_WAKESET);	/* enable wake-from-sleep */
-	au_sync();
-	spin_unlock_irqrestore(&pm_lock, flags);
-	au1000_calibrate_delay();
-	restore_local_and_enable(0, intc0_mask);
-	restore_local_and_enable(1, intc1_mask);
-
-	return retval;
-}
-#endif
-
-static struct ctl_table pm_table[] = {
-	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "sleep",
-		.data		= NULL,
-		.maxlen		= 0,
-		.mode		= 0600,
-		.proc_handler	= &pm_do_sleep
-	},
-#if !defined(CONFIG_SOC_AU1200) && !defined(CONFIG_SOC_AU1550)
-	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "freq",
-		.data		= NULL,
-		.maxlen		= 0,
-		.mode		= 0600,
-		.proc_handler	= &pm_do_freq
-	},
-#endif
-	{}
-};
-
-static struct ctl_table pm_dir_table[] = {
-	{
-		.ctl_name	= CTL_UNNUMBERED,
-		.procname	= "pm",
-		.mode		= 0555,
-		.child		= pm_table
-	},
-	{}
-};
-
-/*
- * Initialize power interface
- */
-static int __init pm_init(void)
-{
-	/* init TOY to tick at 1Hz. No need to wait for access bits
-	 * since there's plenty of time between here and the first
-	 * suspend cycle.
-	 */
-	if (au_readl(SYS_TOYTRIM) != 32767) {
-		au_writel(32767, SYS_TOYTRIM);
-		au_sync();
-	}
-
-	register_sysctl_table(pm_dir_table);
-	return 0;
-}
-
-__initcall(pm_init);
-
 #endif	/* CONFIG_PM */
diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile
index c0eb87a66fb..730f9f2b30e 100644
--- a/arch/mips/alchemy/devboards/Makefile
+++ b/arch/mips/alchemy/devboards/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-y += prom.o
+obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_MIPS_PB1000)	+= pb1000/
 obj-$(CONFIG_MIPS_PB1100)	+= pb1100/
 obj-$(CONFIG_MIPS_PB1200)	+= pb1200/
diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c
new file mode 100644
index 00000000000..d5eb9c325ed
--- /dev/null
+++ b/arch/mips/alchemy/devboards/pm.c
@@ -0,0 +1,229 @@
+/*
+ * Alchemy Development Board example suspend userspace interface.
+ *
+ * (c) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
+ */
+
+#include <linux/init.h>
+#include <linux/kobject.h>
+#include <linux/suspend.h>
+#include <linux/sysfs.h>
+#include <asm/mach-au1x00/au1000.h>
+
+/*
+ * Generic suspend userspace interface for Alchemy development boards.
+ * This code exports a few sysfs nodes under /sys/power/db1x/ which
+ * can be used by userspace to en/disable all au1x-provided wakeup
+ * sources and configure the timeout after which the the TOYMATCH2 irq
+ * is to trigger a wakeup.
+ */
+
+
+static unsigned long db1x_pm_sleep_secs;
+static unsigned long db1x_pm_wakemsk;
+static unsigned long db1x_pm_last_wakesrc;
+
+static int db1x_pm_enter(suspend_state_t state)
+{
+	/* enable GPIO based wakeup */
+	au_writel(1, SYS_PININPUTEN);
+
+	/* clear and setup wake cause and source */
+	au_writel(0, SYS_WAKEMSK);
+	au_sync();
+	au_writel(0, SYS_WAKESRC);
+	au_sync();
+
+	au_writel(db1x_pm_wakemsk, SYS_WAKEMSK);
+	au_sync();
+
+	/* setup 1Hz-timer-based wakeup: wait for reg access */
+	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20)
+		asm volatile ("nop");
+
+	au_writel(au_readl(SYS_TOYREAD) + db1x_pm_sleep_secs, SYS_TOYMATCH2);
+	au_sync();
+
+	/* wait for value to really hit the register */
+	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20)
+		asm volatile ("nop");
+
+	/* ...and now the sandman can come! */
+	au_sleep();
+
+	return 0;
+}
+
+static int db1x_pm_begin(suspend_state_t state)
+{
+	if (!db1x_pm_wakemsk) {
+		printk(KERN_ERR "db1x: no wakeup source activated!\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void db1x_pm_end(void)
+{
+	/* read and store wakeup source, the clear the register. To
+	 * be able to clear it, WAKEMSK must be cleared first.
+	 */
+	db1x_pm_last_wakesrc = au_readl(SYS_WAKESRC);
+
+	au_writel(0, SYS_WAKEMSK);
+	au_writel(0, SYS_WAKESRC);
+	au_sync();
+
+}
+
+static struct platform_suspend_ops db1x_pm_ops = {
+	.valid		= suspend_valid_only_mem,
+	.begin		= db1x_pm_begin,
+	.enter		= db1x_pm_enter,
+	.end		= db1x_pm_end,
+};
+
+#define ATTRCMP(x) (0 == strcmp(attr->attr.name, #x))
+
+static ssize_t db1x_pmattr_show(struct kobject *kobj,
+				struct kobj_attribute *attr,
+				char *buf)
+{
+	int idx;
+
+	if (ATTRCMP(timer_timeout))
+		return sprintf(buf, "%lu\n", db1x_pm_sleep_secs);
+
+	else if (ATTRCMP(timer))
+		return sprintf(buf, "%u\n",
+				!!(db1x_pm_wakemsk & SYS_WAKEMSK_M2));
+
+	else if (ATTRCMP(wakesrc))
+		return sprintf(buf, "%lu\n", db1x_pm_last_wakesrc);
+
+	else if (ATTRCMP(gpio0) || ATTRCMP(gpio1) || ATTRCMP(gpio2) ||
+		 ATTRCMP(gpio3) || ATTRCMP(gpio4) || ATTRCMP(gpio5) ||
+		 ATTRCMP(gpio6) || ATTRCMP(gpio7)) {
+		idx = (attr->attr.name)[4] - '0';
+		return sprintf(buf, "%d\n",
+			!!(db1x_pm_wakemsk & SYS_WAKEMSK_GPIO(idx)));
+
+	} else if (ATTRCMP(wakemsk)) {
+		return sprintf(buf, "%08lx\n", db1x_pm_wakemsk);
+	}
+
+	return -ENOENT;
+}
+
+static ssize_t db1x_pmattr_store(struct kobject *kobj,
+				 struct kobj_attribute *attr,
+				 const char *instr,
+				 size_t bytes)
+{
+	unsigned long l;
+	int tmp;
+
+	if (ATTRCMP(timer_timeout)) {
+		tmp = strict_strtoul(instr, 0, &l);
+		if (tmp)
+			return tmp;
+
+		db1x_pm_sleep_secs = l;
+
+	} else if (ATTRCMP(timer)) {
+		if (instr[0] != '0')
+			db1x_pm_wakemsk |= SYS_WAKEMSK_M2;
+		else
+			db1x_pm_wakemsk &= ~SYS_WAKEMSK_M2;
+
+	} else if (ATTRCMP(gpio0) || ATTRCMP(gpio1) || ATTRCMP(gpio2) ||
+		   ATTRCMP(gpio3) || ATTRCMP(gpio4) || ATTRCMP(gpio5) ||
+		   ATTRCMP(gpio6) || ATTRCMP(gpio7)) {
+		tmp = (attr->attr.name)[4] - '0';
+		if (instr[0] != '0') {
+			db1x_pm_wakemsk |= SYS_WAKEMSK_GPIO(tmp);
+		} else {
+			db1x_pm_wakemsk &= ~SYS_WAKEMSK_GPIO(tmp);
+		}
+
+	} else if (ATTRCMP(wakemsk)) {
+		tmp = strict_strtoul(instr, 0, &l);
+		if (tmp)
+			return tmp;
+
+		db1x_pm_wakemsk = l & 0x0000003f;
+
+	} else
+		bytes = -ENOENT;
+
+	return bytes;
+}
+
+#define ATTR(x)							\
+	static struct kobj_attribute x##_attribute = 		\
+		__ATTR(x, 0664, db1x_pmattr_show,		\
+				db1x_pmattr_store);
+
+ATTR(gpio0)		/* GPIO-based wakeup enable */
+ATTR(gpio1)
+ATTR(gpio2)
+ATTR(gpio3)
+ATTR(gpio4)
+ATTR(gpio5)
+ATTR(gpio6)
+ATTR(gpio7)
+ATTR(timer)		/* TOYMATCH2-based wakeup enable */
+ATTR(timer_timeout)	/* timer-based wakeup timeout value, in seconds */
+ATTR(wakesrc)		/* contents of SYS_WAKESRC after last wakeup */
+ATTR(wakemsk)		/* direct access to SYS_WAKEMSK */
+
+#define ATTR_LIST(x)	& x ## _attribute.attr
+static struct attribute *db1x_pmattrs[] = {
+	ATTR_LIST(gpio0),
+	ATTR_LIST(gpio1),
+	ATTR_LIST(gpio2),
+	ATTR_LIST(gpio3),
+	ATTR_LIST(gpio4),
+	ATTR_LIST(gpio5),
+	ATTR_LIST(gpio6),
+	ATTR_LIST(gpio7),
+	ATTR_LIST(timer),
+	ATTR_LIST(timer_timeout),
+	ATTR_LIST(wakesrc),
+	ATTR_LIST(wakemsk),
+	NULL,		/* terminator */
+};
+
+static struct attribute_group db1x_pmattr_group = {
+	.name	= "db1x",
+	.attrs	= db1x_pmattrs,
+};
+
+/*
+ * Initialize suspend interface
+ */
+static int __init pm_init(void)
+{
+	/* init TOY to tick at 1Hz if not already done. No need to wait
+	 * for confirmation since there's plenty of time from here to
+	 * the next suspend cycle.
+	 */
+	if (au_readl(SYS_TOYTRIM) != 32767) {
+		au_writel(32767, SYS_TOYTRIM);
+		au_sync();
+	}
+
+	db1x_pm_last_wakesrc = au_readl(SYS_WAKESRC);
+
+	au_writel(0, SYS_WAKESRC);
+	au_sync();
+	au_writel(0, SYS_WAKEMSK);
+	au_sync();
+
+	suspend_set_ops(&db1x_pm_ops);
+
+	return sysfs_create_group(power_kobj, &db1x_pmattr_group);
+}
+
+late_initcall(pm_init);
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 515373c6d4a..62f91f50b5b 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -1560,6 +1560,10 @@ enum soc_au1200_ints {
 #define SYS_SLPPWR		0xB1900078
 #define SYS_SLEEP		0xB190007C
 
+#define SYS_WAKEMSK_D2		(1 << 9)
+#define SYS_WAKEMSK_M2		(1 << 8)
+#define SYS_WAKEMSK_GPIO(x)	(1 << (x))
+
 /* Clock Controller */
 #define SYS_FREQCTRL0		0xB1900020
 #  define SYS_FC_FRDIV2_BIT	22
-- 
GitLab


From cde15b5927fea3e1b4de0b277008cf273d8b000b Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 6 Jan 2009 23:07:20 +0000
Subject: [PATCH 148/492] MIPS: Only write c0_framemask on CPUs which have this
 register.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/tlb-r4k.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 5ce2fa74562..9619f66e531 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -478,7 +478,10 @@ void __cpuinit tlb_init(void)
 	probe_tlb(config);
 	write_c0_pagemask(PM_DEFAULT_MASK);
 	write_c0_wired(0);
-	write_c0_framemask(0);
+	if (current_cpu_type() == CPU_R10000 ||
+	    current_cpu_type() == CPU_R12000 ||
+	    current_cpu_type() == CPU_R14000)
+		write_c0_framemask(0);
 	temp_tlb_entry = current_cpu_data.tlbsize - 1;
 
         /* From this point on the ARC firmware is dead.  */
-- 
GitLab


From fd2ab30b65e961b974ae0bc71e0d47d6b35e0968 Mon Sep 17 00:00:00 2001
From: Steven Noonan <steven@uplinklabs.net>
Date: Sun, 11 Jan 2009 01:04:22 -0800
Subject: [PATCH 149/492] kernel/sched.c: add missing forward declaration for
 'double_rq_lock'

Impact: build fix on certain configs

Added 'double_rq_lock' forward declaration, allowing double_rq_lock
to be used in _double_lock_balance().

Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/sched.c b/kernel/sched.c
index f0c0a81d763..8be2c13b50d 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -125,6 +125,9 @@ DEFINE_TRACE(sched_switch);
 DEFINE_TRACE(sched_migrate_task);
 
 #ifdef CONFIG_SMP
+
+static void double_rq_lock(struct rq *rq1, struct rq *rq2);
+
 /*
  * Divide a load by a sched group cpu_power : (load / sg->__cpu_power)
  * Since cpu_power is a 'constant', we can use a reciprocal divide.
-- 
GitLab


From 9d0793370987b98708d2f75ee3bba7c1008d8512 Mon Sep 17 00:00:00 2001
From: David Miller <davem@davemloft.net>
Date: Sun, 11 Jan 2009 04:06:40 -0800
Subject: [PATCH 150/492] sparc64: Fix cpumask related build failure

cpumask_of_pcibus() was missing - this triggers on NUMA builds.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/sparc/include/asm/topology_64.h | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
index b8a65b64e1d..5bc0b8fd637 100644
--- a/arch/sparc/include/asm/topology_64.h
+++ b/arch/sparc/include/asm/topology_64.h
@@ -47,6 +47,10 @@ static inline int pcibus_to_node(struct pci_bus *pbus)
 	(pcibus_to_node(bus) == -1 ? \
 	 CPU_MASK_ALL : \
 	 node_to_cpumask(pcibus_to_node(bus)))
+#define cpumask_of_pcibus(bus)	\
+	(pcibus_to_node(bus) == -1 ? \
+	 CPU_MASK_ALL_PTR : \
+	 cpumask_of_node(pcibus_to_node(bus)))
 
 #define SD_NODE_INIT (struct sched_domain) {		\
 	.min_interval		= 8,			\
-- 
GitLab


From 57de16e612d63138bd2c618449af9d8312466e25 Mon Sep 17 00:00:00 2001
From: Martin Bachem <m.bachem@gmx.de>
Date: Sun, 26 Oct 2008 13:30:09 +0100
Subject: [PATCH 151/492] BUGFIX: used NULL pointer at
 ioctl(sk,IMGETDEVINFO,&devinfo) when devinfo.id not registered

daxtar example # modprobe hfcsusb
daxtar example # modprobe mISDN_l1loop
daxtar example # ./misdnportinfo
Found 3 devices
        id:             0
        Dprotocols:     00000006
        Bprotocols:     0000000e
        protocol:       0
        nrbchan:        2
        name:           HFC-S_USB.1
        id:             1
        Dprotocols:     00000006
        Bprotocols:     0000000e
        protocol:       0
        nrbchan:        2
        name:           mISDN_l1loop.1
        id:             2
        Dprotocols:     00000006
        Bprotocols:     0000000e
        protocol:       0
        nrbchan:        2
        name:           mISDN_l1loop.2
daxtar example # rmmod hfcsusb
daxtar example # ./misdnportinfo
Found 2 devices
*Segmentation* *fault*

dmesg:

[ 9914.939718] BUG: unable to handle kernel NULL pointer dereference at 000000d4
[ 9914.939721] IP: [<f8f9f2dd>] :mISDN_core:get_mdevice+0x19/0x22
[ 9914.939729] *pde = 00000000
[ 9914.939732] Oops: 0000 [#14] PREEMPT SMP
[ 9914.939734] Modules linked in: mISDN_l1loop mISDN_core vmnet vmblock vmci vmmon coretemp w83627ehf hwmon_vid rfcomm l2cap blue
tooth usbhid snd_usb_audio snd_usb_lib snd_rawmidi snd_hwdep fuse nvidia(P) uhci_hcd i2c_i801 ehci_hcd snd_hda_intel atl1 usbcore i2c_core parport_seria
l [last unloaded: hfcsusb]
[ 9914.939751] Pid: 29618, comm: misdnportinfo Tainted: P      D   (2.6.27.3 #5)
[ 9914.939753] EIP: 0060:[<f8f9f2dd>] EFLAGS: 00210246 CPU: 0
[ 9914.939758] EIP is at get_mdevice+0x19/0x22 [mISDN_core]
[ 9914.939760] EAX: 00000000 EBX: f8fa791c ECX: f6afaa58 EDX: f7960cf4
[ 9914.939762] ESI: 80044944 EDI: bfc2e62c EBP: bfc2e62c ESP: f5adbef4
[ 9914.939763]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 9914.939765] Process misdnportinfo (pid: 29618, ti=f5ada000 task=f6bec430 task.ti=f5ada000)
[ 9914.939767] Stack: f8f9f4e0 00000000 f8f9f867 bfc2e62c 0000000a c02461e8 00200246 c042dde8
[ 9914.939771]        00000003 c042dde4 00000000 00000001 00200082 c0114775 00000000 00000000
[ 9914.939775]        00000003 f7088010 00200282 f8fa791c 80044944 bfc2e62c bfc2e62c c02f6615
[ 9914.939780] Call Trace:
[ 9914.939782]  [<f8f9f4e0>] _get_mdevice+0x0/0x18 [mISDN_core]
[ 9914.939789]  [<f8f9f867>] base_sock_ioctl+0x7a/0x129 [mISDN_core]
[ 9914.939789]  [<c02461e8>] opost+0x171/0x182
[ 9914.939789]  [<c0114775>] __wake_up+0x29/0x39
[ 9914.939789]  [<c02f6615>] sock_ioctl+0x1b5/0x1d9
[ 9914.939789]  [<c02f6460>] sock_ioctl+0x0/0x1d9
[ 9914.939789]  [<c016794c>] vfs_ioctl+0x1c/0x5d
[ 9914.939789]  [<c0167bcb>] do_vfs_ioctl+0x23e/0x24e
[ 9914.939789]  [<c0167c07>] sys_ioctl+0x2c/0x45
[ 9914.939789]  [<c0102cbd>] sysenter_do_call+0x12/0x21
[ 9914.939789]  [<c0350000>] pci_fixup_i450gx+0x4e/0x56
[ 9914.939789]  =======================
[ 9914.939789] Code: 00 68 02 f0 f9 f8 e8 ae b4 2c c7 8b 44 24 04 5a 59 c3 83 ec 04 31 d2 89 04 24 89 e1 b8 ac df fa f8 68 e0 f4
f9 f8 e8 4a b5 2c c7 <8b> 80 d4 00 00 00 5a 59 c3 53 89 cb 8d 90 9c 00 00 00 89 c8 e8
[ 9914.939789] EIP: [<f8f9f2dd>] get_mdevice+0x19/0x22 [mISDN_core] SS:ESP 0068:f5adbef4
[ 9914.939858] ---[ end trace 50e18a715b019424 ]---

Signed-off-by: Martin Bachem <m.bachem@gmx.de>
Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 include/linux/mISDNif.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/include/linux/mISDNif.h b/include/linux/mISDNif.h
index 557477ac3d5..5da3d95b27f 100644
--- a/include/linux/mISDNif.h
+++ b/include/linux/mISDNif.h
@@ -559,7 +559,10 @@ extern void	mISDN_unregister_clock(struct mISDNclock *);
 
 static inline struct mISDNdevice *dev_to_mISDN(struct device *dev)
 {
-	return dev_get_drvdata(dev);
+	if (dev)
+		return dev_get_drvdata(dev);
+	else
+		return NULL;
 }
 
 extern void	set_channel_address(struct mISDNchannel *, u_int, u_int);
-- 
GitLab


From 9785a8f8db3df0605fa680f44185957aff9d8776 Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Sun, 11 Jan 2009 17:58:13 +0100
Subject: [PATCH 152/492] Make parameter debug writable

Overseen in the last patch series.

Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/hardware/mISDN/hfcpci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 917bf41a293..f0e14dfcf71 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -61,7 +61,7 @@ u32	hfc_jiffies;
 
 MODULE_AUTHOR("Karsten Keil");
 MODULE_LICENSE("GPL");
-module_param(debug, uint, 0);
+module_param(debug, uint, S_IRUGO | S_IWUSR);
 module_param(poll, uint, S_IRUGO | S_IWUSR);
 
 enum {
-- 
GitLab


From f27b8c356c4fab9ad222b45bc1cd1c750e64d97b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Fri, 9 Jan 2009 12:22:50 -0800
Subject: [PATCH 153/492] indentation & braces disagree - add braces
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Nothing is broken because of this - currently.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 drivers/isdn/mISDN/dsp_cmx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
index 0ac67bff303..b70c66b9d10 100644
--- a/drivers/isdn/mISDN/dsp_cmx.c
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -1893,7 +1893,7 @@ dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb)
 		/* in case of hardware (echo) */
 		if (dsp->pcm_slot_tx >= 0)
 			return;
-		if (dsp->echo)
+		if (dsp->echo) {
 			nskb = skb_clone(skb, GFP_ATOMIC);
 			if (nskb) {
 				hh = mISDN_HEAD_P(nskb);
@@ -1902,6 +1902,7 @@ dsp_cmx_hdlc(struct dsp *dsp, struct sk_buff *skb)
 				skb_queue_tail(&dsp->sendq, nskb);
 				schedule_work(&dsp->workq);
 			}
+		}
 		return;
 	}
 	/* in case of hardware conference */
-- 
GitLab


From 20b788045b73e81ace2498eae42220e64547d6d2 Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Fri, 9 Jan 2009 12:22:53 -0800
Subject: [PATCH 154/492] drivers/isdn/hardware/mISDN: move a dereference below
 a NULL test

In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@@
type T;
expression E;
identifier i,fld;
statement S;
@@

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/hardware/mISDN/hfcmulti.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 97f4708b387..595ba8eb4a0 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -3615,7 +3615,7 @@ hfcm_bctrl(struct mISDNchannel *ch, u_int cmd, void *arg)
 static void
 ph_state_change(struct dchannel *dch)
 {
-	struct hfc_multi *hc = dch->hw;
+	struct hfc_multi *hc;
 	int ch, i;
 
 	if (!dch) {
@@ -3623,6 +3623,7 @@ ph_state_change(struct dchannel *dch)
 		    __func__);
 		return;
 	}
+	hc = dch->hw;
 	ch = dch->slot;
 
 	if (hc->type == 1) {
-- 
GitLab


From 1916ebb2ddad78ae6405b1291acb9f9de212ec49 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Fri, 9 Jan 2009 12:22:51 -0800
Subject: [PATCH 155/492] misdn: one handmade ARRAY_SIZE converted
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Defined as:

static struct device_attribute element_attributes[] = {

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/mISDN/dsp_pipeline.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/isdn/mISDN/dsp_pipeline.c b/drivers/isdn/mISDN/dsp_pipeline.c
index bf999bdc41c..0c773fa9dbd 100644
--- a/drivers/isdn/mISDN/dsp_pipeline.c
+++ b/drivers/isdn/mISDN/dsp_pipeline.c
@@ -110,8 +110,7 @@ int mISDN_dsp_element_register(struct mISDN_dsp_element *elem)
 	}
 	list_add_tail(&entry->list, &dsp_elements);
 
-	for (i = 0; i < (sizeof(element_attributes)
-		/ sizeof(struct device_attribute)); ++i)
+	for (i = 0; i < ARRAY_SIZE(element_attributes); ++i)
 		ret = device_create_file(&entry->dev,
 				&element_attributes[i]);
 		if (ret) {
-- 
GitLab


From 21c150a6d2c39fe6975e91437095a2c31efdb550 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Fri, 9 Jan 2009 12:22:52 -0800
Subject: [PATCH 156/492] misdn: indentation and braces disagree - add braces
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is not buggy due to plain luck as there is only one entry currently
in the element_attributes.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/mISDN/dsp_pipeline.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/mISDN/dsp_pipeline.c b/drivers/isdn/mISDN/dsp_pipeline.c
index 0c773fa9dbd..18cf87c113e 100644
--- a/drivers/isdn/mISDN/dsp_pipeline.c
+++ b/drivers/isdn/mISDN/dsp_pipeline.c
@@ -110,7 +110,7 @@ int mISDN_dsp_element_register(struct mISDN_dsp_element *elem)
 	}
 	list_add_tail(&entry->list, &dsp_elements);
 
-	for (i = 0; i < ARRAY_SIZE(element_attributes); ++i)
+	for (i = 0; i < ARRAY_SIZE(element_attributes); ++i) {
 		ret = device_create_file(&entry->dev,
 				&element_attributes[i]);
 		if (ret) {
@@ -118,6 +118,7 @@ int mISDN_dsp_element_register(struct mISDN_dsp_element *elem)
 				__func__);
 			goto err2;
 		}
+	}
 
 #ifdef PIPELINE_DEBUG
 	printk(KERN_DEBUG "%s: %s registered\n", __func__, elem->name);
-- 
GitLab


From fae3e7fba4c664b3a15f2cf15ac439e8d754afc2 Mon Sep 17 00:00:00 2001
From: Karsten Keil <kkeil@suse.de>
Date: Sun, 11 Jan 2009 18:36:30 +0100
Subject: [PATCH 157/492] Fix small typo

Remove additional ;

Signed-off-by: Karsten Keil <kkeil@suse.de>
---
 drivers/isdn/mISDN/dsp_cmx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
index b70c66b9d10..58c43e429f7 100644
--- a/drivers/isdn/mISDN/dsp_cmx.c
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -1579,7 +1579,7 @@ send_packet:
 	schedule_work(&dsp->workq);
 }
 
-static u32	jittercount; /* counter for jitter check */;
+static u32	jittercount; /* counter for jitter check */
 struct timer_list dsp_spl_tl;
 u32	dsp_spl_jiffies; /* calculate the next time to fire */
 static u16	dsp_count; /* last sample count */
-- 
GitLab


From ae04d1401577bb63151480a053057de58b8e10bb Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 12 Jan 2009 11:22:01 +1100
Subject: [PATCH 158/492] powerpc: Fix cpufreq drivers after cpufreq core
 changes

This updates the cpufreq drivers in arch/powerpc so they build again
after the core cpufreq changes that broke them in commit
in835481d9bcd65720b473db6b38746a74a3964218.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/powerpc/platforms/cell/cbe_cpufreq.c       | 2 +-
 arch/powerpc/platforms/cell/cpufreq_spudemand.c | 4 ++--
 arch/powerpc/platforms/pasemi/cpufreq.c         | 2 +-
 arch/powerpc/platforms/powermac/cpufreq_64.c    | 2 +-
 4 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c
index ec7c8f45a21..e6506cd0ff9 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq.c
@@ -118,7 +118,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	policy->cur = cbe_freqs[cur_pmode].frequency;
 
 #ifdef CONFIG_SMP
-	policy->cpus = per_cpu(cpu_sibling_map, policy->cpu);
+	cpumask_copy(policy->cpus, &per_cpu(cpu_sibling_map, policy->cpu));
 #endif
 
 	cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu);
diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
index a3c6c01bd6d..968c1c0b4d5 100644
--- a/arch/powerpc/platforms/cell/cpufreq_spudemand.c
+++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
@@ -110,7 +110,7 @@ static int spu_gov_govern(struct cpufreq_policy *policy, unsigned int event)
 		}
 
 		/* initialize spu_gov_info for all affected cpus */
-		for_each_cpu_mask(i, policy->cpus) {
+		for_each_cpu(i, policy->cpus) {
 			affected_info = &per_cpu(spu_gov_info, i);
 			affected_info->policy = policy;
 		}
@@ -127,7 +127,7 @@ static int spu_gov_govern(struct cpufreq_policy *policy, unsigned int event)
 		spu_gov_cancel_work(info);
 
 		/* clean spu_gov_info for all affected cpus */
-		for_each_cpu_mask (i, policy->cpus) {
+		for_each_cpu (i, policy->cpus) {
 			info = &per_cpu(spu_gov_info, i);
 			info->policy = NULL;
 		}
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
index 86db47c1b66..be2527a516e 100644
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ b/arch/powerpc/platforms/pasemi/cpufreq.c
@@ -213,7 +213,7 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	pr_debug("current astate is at %d\n",cur_astate);
 
 	policy->cur = pas_freqs[cur_astate].frequency;
-	policy->cpus = cpu_online_map;
+	cpumask_copy(policy->cpus, &cpu_online_map);
 
 	ppc_proc_freq = policy->cur * 1000ul;
 
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
index 4dfb4bc242b..beb38333b6d 100644
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ b/arch/powerpc/platforms/powermac/cpufreq_64.c
@@ -362,7 +362,7 @@ static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	/* secondary CPUs are tied to the primary one by the
 	 * cpufreq core if in the secondary policy we tell it that
 	 * it actually must be one policy together with all others. */
-	policy->cpus = cpu_online_map;
+	cpumask_copy(policy->cpus, &cpu_online_map);
 	cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
 
 	return cpufreq_frequency_table_cpuinfo(policy,
-- 
GitLab


From 4b558991049c12689e5fd645222864b8a80730f1 Mon Sep 17 00:00:00 2001
From: Wu Fengguang <fengguang.wu@intel.com>
Date: Mon, 12 Jan 2009 09:18:58 +0800
Subject: [PATCH 159/492] ALSA: hda - add support for Intel DX58SO board

The Intel DX58SO board works fine with model ALC883_3ST_6ch_INTEL.

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index aa86a158450..ea4c88fe05c 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8526,6 +8526,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
 	SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL),
 	SND_PCI_QUIRK(0x8086, 0x0002, "DG33FBC", ALC883_3ST_6ch_INTEL),
+	SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL),
 	SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch),
 	{}
 };
-- 
GitLab


From 6acaed38a32e8571e92cfc832b971f9e4450c207 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Mon, 12 Jan 2009 10:09:24 +0100
Subject: [PATCH 160/492] ALSA: hda - Use own workqueue

snd-hda-intel driver used schedule_work() fot the delayed DMA pointer
updates, but this has several potential problems:
- it may block other eventsd works longer
- it may deadlock when probing fails and flush_scheduled_work() is
  called during probe callback (as probe callback itself could be
  invoked from eventd)

This patch adds an own workq for each driver instance to solve these
problems.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_beep.c  |  1 -
 sound/pci/hda/hda_codec.c | 23 +++++++++++++++++------
 sound/pci/hda/hda_codec.h |  1 +
 sound/pci/hda/hda_intel.c |  6 +++---
 4 files changed, 21 insertions(+), 10 deletions(-)

diff --git a/sound/pci/hda/hda_beep.c b/sound/pci/hda/hda_beep.c
index e00421c0d8b..960fd797038 100644
--- a/sound/pci/hda/hda_beep.c
+++ b/sound/pci/hda/hda_beep.c
@@ -135,7 +135,6 @@ void snd_hda_detach_beep_device(struct hda_codec *codec)
 	struct hda_beep *beep = codec->beep;
 	if (beep) {
 		cancel_work_sync(&beep->beep_work);
-		flush_scheduled_work();
 
 		input_unregister_device(beep->dev);
 		kfree(beep);
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index f80e5f3b97d..3c596da2b9b 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -373,7 +373,7 @@ int snd_hda_queue_unsol_event(struct hda_bus *bus, u32 res, u32 res_ex)
 	unsol->queue[wp] = res;
 	unsol->queue[wp + 1] = res_ex;
 
-	schedule_work(&unsol->work);
+	queue_work(bus->workq, &unsol->work);
 
 	return 0;
 }
@@ -437,15 +437,17 @@ static int snd_hda_bus_free(struct hda_bus *bus)
 
 	if (!bus)
 		return 0;
-	if (bus->unsol) {
-		flush_scheduled_work();
+	if (bus->workq)
+		flush_workqueue(bus->workq);
+	if (bus->unsol)
 		kfree(bus->unsol);
-	}
 	list_for_each_entry_safe(codec, n, &bus->codec_list, list) {
 		snd_hda_codec_free(codec);
 	}
 	if (bus->ops.private_free)
 		bus->ops.private_free(bus);
+	if (bus->workq)
+		destroy_workqueue(bus->workq);
 	kfree(bus);
 	return 0;
 }
@@ -485,6 +487,7 @@ int /*__devinit*/ snd_hda_bus_new(struct snd_card *card,
 {
 	struct hda_bus *bus;
 	int err;
+	char qname[8];
 	static struct snd_device_ops dev_ops = {
 		.dev_register = snd_hda_bus_dev_register,
 		.dev_free = snd_hda_bus_dev_free,
@@ -514,6 +517,14 @@ int /*__devinit*/ snd_hda_bus_new(struct snd_card *card,
 	mutex_init(&bus->cmd_mutex);
 	INIT_LIST_HEAD(&bus->codec_list);
 
+	snprintf(qname, sizeof(qname), "hda%d", card->number);
+	bus->workq = create_workqueue(qname);
+	if (!bus->workq) {
+		snd_printk(KERN_ERR "cannot create workqueue %s\n", qname);
+		kfree(bus);
+		return -ENOMEM;
+	}
+
 	err = snd_device_new(card, SNDRV_DEV_BUS, bus, &dev_ops);
 	if (err < 0) {
 		snd_hda_bus_free(bus);
@@ -684,7 +695,7 @@ static void snd_hda_codec_free(struct hda_codec *codec)
 		return;
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	cancel_delayed_work(&codec->power_work);
-	flush_scheduled_work();
+	flush_workqueue(codec->bus->workq);
 #endif
 	list_del(&codec->list);
 	snd_array_free(&codec->mixers);
@@ -1273,7 +1284,7 @@ void snd_hda_codec_reset(struct hda_codec *codec)
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	cancel_delayed_work(&codec->power_work);
-	flush_scheduled_work();
+	flush_workqueue(codec->bus->workq);
 #endif
 	snd_hda_ctls_clear(codec);
 	/* relase PCMs */
diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h
index e9c723e13e5..5810ef58840 100644
--- a/sound/pci/hda/hda_codec.h
+++ b/sound/pci/hda/hda_codec.h
@@ -614,6 +614,7 @@ struct hda_bus {
 
 	/* unsolicited event queue */
 	struct hda_bus_unsolicited *unsol;
+	struct workqueue_struct *workq;	/* common workqueue for codecs */
 
 	/* assigned PCMs */
 	DECLARE_BITMAP(pcm_dev_bits, SNDRV_PCM_DEVICES);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index f04de115ee1..11e791b965f 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -996,10 +996,11 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id)
 				spin_unlock(&chip->reg_lock);
 				snd_pcm_period_elapsed(azx_dev->substream);
 				spin_lock(&chip->reg_lock);
-			} else {
+			} else if (chip->bus && chip->bus->workq) {
 				/* bogus IRQ, process it later */
 				azx_dev->irq_pending = 1;
-				schedule_work(&chip->irq_pending_work);
+				queue_work(chip->bus->workq,
+					   &chip->irq_pending_work);
 			}
 		}
 	}
@@ -1741,7 +1742,6 @@ static void azx_clear_irq_pending(struct azx *chip)
 	for (i = 0; i < chip->num_streams; i++)
 		chip->azx_dev[i].irq_pending = 0;
 	spin_unlock_irq(&chip->reg_lock);
-	flush_scheduled_work();
 }
 
 static struct snd_pcm_ops azx_pcm_ops = {
-- 
GitLab


From 68b5e4891c2a7a86d8fe65c29c025d7a7f2b0e35 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 12 Jan 2009 12:07:32 +0100
Subject: [PATCH 161/492] [ARM] i.MX: remove LCDC controller register
 definitions from imx-regs.h

The LCDC controller register definitions are now part of the driver
itself, so remove them from imx-regs.h to avoid redefitions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/include/mach/imx-regs.h | 106 ----------------------
 1 file changed, 106 deletions(-)

diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
index fb9de273387..490297fc0e3 100644
--- a/arch/arm/mach-imx/include/mach/imx-regs.h
+++ b/arch/arm/mach-imx/include/mach/imx-regs.h
@@ -373,110 +373,4 @@
 #define TSTAT_CAPT         (1<<1)
 #define TSTAT_COMP         (1<<0)
 
-/*
- * LCD Controller
- */
-
-#define LCDC_SSA	__REG(IMX_LCDC_BASE+0x00)
-
-#define LCDC_SIZE	__REG(IMX_LCDC_BASE+0x04)
-#define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
-#define SIZE_YMAX(y)    ( (y) & 0x1ff )
-
-#define LCDC_VPW	__REG(IMX_LCDC_BASE+0x08)
-#define VPW_VPW(x)	( (x) & 0x3ff )
-
-#define LCDC_CPOS	__REG(IMX_LCDC_BASE+0x0C)
-#define CPOS_CC1        (1<<31)
-#define CPOS_CC0        (1<<30)
-#define CPOS_OP         (1<<28)
-#define CPOS_CXP(x)     (((x) & 3ff) << 16)
-#define CPOS_CYP(y)     ((y) & 0x1ff)
-
-#define LCDC_LCWHB	__REG(IMX_LCDC_BASE+0x10)
-#define LCWHB_BK_EN     (1<<31)
-#define LCWHB_CW(w)     (((w) & 0x1f) << 24)
-#define LCWHB_CH(h)     (((h) & 0x1f) << 16)
-#define LCWHB_BD(x)     ((x) & 0xff)
-
-#define LCDC_LCHCC	__REG(IMX_LCDC_BASE+0x14)
-#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
-#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
-#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
-
-#define LCDC_PCR	__REG(IMX_LCDC_BASE+0x18)
-#define PCR_TFT         (1<<31)
-#define PCR_COLOR       (1<<30)
-#define PCR_PBSIZ_1     (0<<28)
-#define PCR_PBSIZ_2     (1<<28)
-#define PCR_PBSIZ_4     (2<<28)
-#define PCR_PBSIZ_8     (3<<28)
-#define PCR_BPIX_1      (0<<25)
-#define PCR_BPIX_2      (1<<25)
-#define PCR_BPIX_4      (2<<25)
-#define PCR_BPIX_8      (3<<25)
-#define PCR_BPIX_12     (4<<25)
-#define PCR_BPIX_16     (4<<25)
-#define PCR_PIXPOL      (1<<24)
-#define PCR_FLMPOL      (1<<23)
-#define PCR_LPPOL       (1<<22)
-#define PCR_CLKPOL      (1<<21)
-#define PCR_OEPOL       (1<<20)
-#define PCR_SCLKIDLE    (1<<19)
-#define PCR_END_SEL     (1<<18)
-#define PCR_END_BYTE_SWAP (1<<17)
-#define PCR_REV_VS      (1<<16)
-#define PCR_ACD_SEL     (1<<15)
-#define PCR_ACD(x)      (((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL    (1<<7)
-#define PCR_SHARP       (1<<6)
-#define PCR_PCD(x)      ((x) & 0x3f)
-
-#define LCDC_HCR	__REG(IMX_LCDC_BASE+0x1C)
-#define HCR_H_WIDTH(x)  (((x) & 0x3f) << 26)
-#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
-#define HCR_H_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_VCR	__REG(IMX_LCDC_BASE+0x20)
-#define VCR_V_WIDTH(x)  (((x) & 0x3f) << 26)
-#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
-#define VCR_V_WAIT_2(x) ((x) & 0xff)
-
-#define LCDC_POS	__REG(IMX_LCDC_BASE+0x24)
-#define POS_POS(x)      ((x) & 1f)
-
-#define LCDC_LSCR1	__REG(IMX_LCDC_BASE+0x28)
-#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x)            (((x) & 0xf))
-
-#define LCDC_PWMR	__REG(IMX_LCDC_BASE+0x2C)
-#define PWMR_CLS(x)     (((x) & 0x1ff) << 16)
-#define PWMR_LDMSK      (1<<15)
-#define PWMR_SCR1       (1<<10)
-#define PWMR_SCR0       (1<<9)
-#define PWMR_CC_EN      (1<<8)
-#define PWMR_PW(x)      ((x) & 0xff)
-
-#define LCDC_DMACR	__REG(IMX_LCDC_BASE+0x30)
-#define DMACR_BURST     (1<<31)
-#define DMACR_HM(x)     (((x) & 0xf) << 16)
-#define DMACR_TM(x)     ((x) &0xf)
-
-#define LCDC_RMCR	__REG(IMX_LCDC_BASE+0x34)
-#define RMCR_LCDC_EN		(1<<1)
-#define RMCR_SELF_REF		(1<<0)
-
-#define LCDC_LCDICR	__REG(IMX_LCDC_BASE+0x38)
-#define LCDICR_INT_SYN  (1<<2)
-#define LCDICR_INT_CON  (1)
-
-#define LCDC_LCDISR	__REG(IMX_LCDC_BASE+0x40)
-#define LCDISR_UDR_ERR (1<<3)
-#define LCDISR_ERR_RES (1<<2)
-#define LCDISR_EOF     (1<<1)
-#define LCDISR_BOF     (1<<0)
-
 #endif				// _IMX_REGS_H
-- 
GitLab


From 96cb767239d12ce98e66892ccc82787fbc63505f Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 12 Jan 2009 12:09:59 +0100
Subject: [PATCH 162/492] [ARM] i.MX: fix breakage from commit
 278892736e99330195c8ae5861bcd9d791bbf19e

Fix breakage from commit 278892736e99330195c8ae5861bcd9d791bbf19e:
    i.MX Framebuffer: rename imxfb_mach_info to imx_fb_platform_data

Forgot to rename the parts in arch/arm/mach-imx/generic.c

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/generic.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index fa72174dd95..887cb21f75b 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -245,11 +245,11 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
 	imx_mmc_device.dev.platform_data = info;
 }
 
-static struct imxfb_mach_info imx_fb_info;
+static struct imx_fb_platform_data imx_fb_info;
 
-void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
+void __init set_imx_fb_info(struct imx_fb_platform_data *hard_imx_fb_info)
 {
-	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info));
+	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imx_fb_platform_data));
 }
 
 static struct resource imxfb_resources[] = {
-- 
GitLab


From da17490c0d4f9fd38761e6a7e95ac0bbd9f45ad9 Mon Sep 17 00:00:00 2001
From: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon, 12 Jan 2009 12:14:40 +0100
Subject: [PATCH 163/492] [ARM] i.MX add missing include

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/clock.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
index 7ec60fc9156..cf332aeb942 100644
--- a/arch/arm/mach-imx/clock.c
+++ b/arch/arm/mach-imx/clock.c
@@ -23,7 +23,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <mach/imx-regs.h>
+#include <mach/hardware.h>
 
 /*
  * Very simple approach: We can't disable clocks, so we do
-- 
GitLab


From 01e3eb82278bf45221fc38b391bc5ee0f6a314d6 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 12 Jan 2009 13:00:50 +0100
Subject: [PATCH 164/492] Revert "sched: improve preempt debugging"

This reverts commit 7317d7b87edb41a9135e30be1ec3f7ef817c53dd.

This has been reported (and bisected) by Alexey Zaytsev and
Kamalesh Babulal to produce annoying warnings during bootup
on both x86 and powerpc.

kernel_locked() is not a valid test in IRQ context (we update the
BKL's ->lock_depth and the preempt count separately and non-atomicalyy),
so we cannot put it into the generic preempt debugging checks which
can run in IRQ contexts too.

Reported-and-bisected-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Reported-and-bisected-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index 8be2c13b50d..3b630d88266 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4440,7 +4440,7 @@ void __kprobes sub_preempt_count(int val)
 	/*
 	 * Underflow?
 	 */
-       if (DEBUG_LOCKS_WARN_ON(val > preempt_count() - (!!kernel_locked())))
+	if (DEBUG_LOCKS_WARN_ON(val > preempt_count()))
 		return;
 	/*
 	 * Is the spinlock portion underflowing?
-- 
GitLab


From 95156f0051cba60ec674bbaa5cf7dc74a74c5612 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Mon, 12 Jan 2009 13:02:11 +0100
Subject: [PATCH 165/492] lockdep, mm: fix might_fault() annotation

Some code (nfs/sunrpc) uses socket ops on kernel memory while holding
the mmap_sem, this is safe because kernel memory doesn't get paged out,
therefore we'll never actually fault, and the might_fault() annotations
will generate false positives.

Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 mm/memory.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/mm/memory.c b/mm/memory.c
index e009ce87085..c2d4c477e5b 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -3165,6 +3165,15 @@ void print_vma_addr(char *prefix, unsigned long ip)
 #ifdef CONFIG_PROVE_LOCKING
 void might_fault(void)
 {
+	/*
+	 * Some code (nfs/sunrpc) uses socket ops on kernel memory while
+	 * holding the mmap_sem, this is safe because kernel memory doesn't
+	 * get paged out, therefore we'll never actually fault, and the
+	 * below annotations will generate false positives.
+	 */
+	if (segment_eq(get_fs(), KERNEL_DS))
+		return;
+
 	might_sleep();
 	/*
 	 * it would be nicer only to annotate paths which are not under
-- 
GitLab


From d672d2fc13242f9284345cb7e4c5a32cd5edefa3 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 10 Jan 2009 11:34:39 +0000
Subject: [PATCH 166/492] [ARM] w90x900: fix build errors and warnings

Fix:
arch/arm/mach-w90x900/mach-w90p910evb.c:65: error: 'W90X900_PA_UART' undeclared here (not in a function)

and silence warnings caused by inappropriate inclusion of mach/system.h.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-w90x900/mach-w90p910evb.c | 1 +
 arch/arm/mach-w90x900/time.c            | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-w90x900/mach-w90p910evb.c b/arch/arm/mach-w90x900/mach-w90p910evb.c
index 9307a247543..9ebc93f4853 100644
--- a/arch/arm/mach-w90x900/mach-w90p910evb.c
+++ b/arch/arm/mach-w90x900/mach-w90p910evb.c
@@ -29,6 +29,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-serial.h>
+#include <mach/map.h>
 
 #include "cpu.h"
 
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 3a69e381f31..bcc838f6b39 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -28,7 +28,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <mach/system.h>
 #include <mach/map.h>
 #include <mach/regs-timer.h>
 
-- 
GitLab


From 98007c230eb1e85ff5d49b4a697835680483dafd Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Fri, 9 Jan 2009 15:28:55 +0100
Subject: [PATCH 167/492] [ARM] 5364/1: allow flush_ioremap_region() to be used
 from modules

Without this, the pxa2xx-flash driver cannot be used as a module.

Reported-by: Chris Lawrence <chrisdl@netspace.net.au>

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mm/proc-syms.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index 4ad3bf291ad..195e48edd8c 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -27,6 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all);
 EXPORT_SYMBOL(__cpuc_flush_user_all);
 EXPORT_SYMBOL(__cpuc_flush_user_range);
 EXPORT_SYMBOL(__cpuc_coherent_kern_range);
+EXPORT_SYMBOL(dmac_inv_range);  /* because of flush_ioremap_region() */
 #else
 EXPORT_SYMBOL(cpu_cache);
 #endif
-- 
GitLab


From 6e96281412f2f757abe623e08a9577e2bbd3402f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 12 Jan 2009 16:04:37 +0100
Subject: [PATCH 168/492] smp_call_function_single(): be slightly less stupid,
 fix #2

fix m68k build failure:

 tip/kernel/up.c: In function 'smp_call_function_single':
 tip/kernel/up.c:16: error: dereferencing pointer to incomplete type
 make[2]: *** [kernel/up.o] Error 1

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/up.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/up.c b/kernel/up.c
index c04b9dcfceb..1ff27a28bb7 100644
--- a/kernel/up.c
+++ b/kernel/up.c
@@ -2,6 +2,7 @@
  * Uniprocessor-only support functions.  The counterpart to kernel/smp.c
  */
 
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/smp.h>
-- 
GitLab


From f313e12308f7c5ea645f18e759d104d088b18615 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Fri, 9 Jan 2009 12:17:43 -0800
Subject: [PATCH 169/492] x86: avoid theoretical vmalloc fault loop

Ajith Kumar noticed:

 I was going through the vmalloc fault handling for x86_64 and am unclear
 about the following lines in the vmalloc_fault() function.

 pgd = pgd_offset(current->mm ?: &init_mm, address);
 pgd_ref = pgd_offset_k(address);

 Here the intention is to get the pgd corresponding to the current process
 and sync it up with the pgd in init_mm(obtained from pgd_offset_k).
 However, for kernel threads current->mm is NULL and hence pgd =
 pgd_offset(init_mm, address) = pgd_ref which means the fault handler
 returns without setting the pgd entry in the MM structure in the context
 of which the kernel thread has faulted.  This could lead to never-ending
 faults and busy looping of kernel threads like pdflush.  So, shouldn't the
 pgd = pgd_offset(current->mm ?: &init_mm, address); be pgd =
 pgd_offset(current->active_mm ?: &init_mm, address);

We can use active_mm unconditionally because it should be always set.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/fault.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 9e268b6b204..90dfae511a4 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -534,7 +534,7 @@ static int vmalloc_fault(unsigned long address)
 	   happen within a race in page table update. In the later
 	   case just flush. */
 
-	pgd = pgd_offset(current->mm ?: &init_mm, address);
+	pgd = pgd_offset(current->active_mm, address);
 	pgd_ref = pgd_offset_k(address);
 	if (pgd_none(*pgd_ref))
 		return -1;
-- 
GitLab


From 4884d8e6a05026ec906355436cea9dc1acb1d09e Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Sun, 11 Jan 2009 18:38:55 +0530
Subject: [PATCH 170/492] x86: fix mpparse.c build error on latest git

Fix this by reintroducing asm/smp.h include in mpparse.c - later on
I will fix this by removing non-smp data from smp.h.

Reported-by: Petr Titera <P.Titera@century.cz>
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/mpparse.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index c0601c2848a..a649a4ccad4 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -27,6 +27,7 @@
 #include <asm/e820.h>
 #include <asm/trampoline.h>
 #include <asm/setup.h>
+#include <asm/smp.h>
 
 #include <mach_apic.h>
 #ifdef CONFIG_X86_32
-- 
GitLab


From 2bc1379712e74c5b99adaa6db433c14d8841ab4f Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Sun, 11 Jan 2009 20:34:47 +0530
Subject: [PATCH 171/492] x86: fix apic.c build error on latest git

Fix this by reintroducing asm/smp.h include in apic.c - later on
I will fix this by removing non-smp data from smp.h

Also fix the __inquire_remote_apic() prototype/inline.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/mach-default/mach_wakecpu.h | 6 ++++++
 arch/x86/kernel/apic.c                           | 1 +
 2 files changed, 7 insertions(+)

diff --git a/arch/x86/include/asm/mach-default/mach_wakecpu.h b/arch/x86/include/asm/mach-default/mach_wakecpu.h
index ceb01366014..89897a6a65b 100644
--- a/arch/x86/include/asm/mach-default/mach_wakecpu.h
+++ b/arch/x86/include/asm/mach-default/mach_wakecpu.h
@@ -24,7 +24,13 @@ static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
 {
 }
 
+#ifdef CONFIG_SMP
 extern void __inquire_remote_apic(int apicid);
+#else /* CONFIG_SMP */
+static inline void __inquire_remote_apic(int apicid)
+{
+}
+#endif /* CONFIG_SMP */
 
 static inline void inquire_remote_apic(int apicid)
 {
diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c
index 566a08466b1..0f830e4f567 100644
--- a/arch/x86/kernel/apic.c
+++ b/arch/x86/kernel/apic.c
@@ -47,6 +47,7 @@
 #include <asm/proto.h>
 #include <asm/apic.h>
 #include <asm/i8259.h>
+#include <asm/smp.h>
 
 #include <mach_apic.h>
 #include <mach_apicdef.h>
-- 
GitLab


From 50c668d678fd01284799a6e4f1b91829d83cb9ed Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 12 Jan 2009 10:49:53 +0100
Subject: [PATCH 172/492] Revert "cpumask: use work_on_cpu in acpi-cpufreq.c
 for drv_read and drv_write"

This reverts commit 7503bfbae89eba07b46441a5d1594647f6b8ab7d.

Dieter Ries reported bootup soft-hangs and bisected it back to
this commit, and reverting this commit gave him a working system.

The commit introduces work_on_cpu() use into the cpufreq code,
but that is subtly problematic from a lock hierarchy POV: the
hotplug-cpu lock is an highlevel lock that is taken before
lowlevel locks, and in this codepath we are called with the
policy lock taken.

Dieter did not have lockdep enabled so we dont have a nice stack
trace proof for this, but using work_on_cpu() in such a lowlevel
place certainly looks wrong, so we revert the patch.

work_on_cpu() needs to be reworked to be more generally usable.

Reported-by: Dieter Ries <clip2@gmx.de>
Tested-by: Dieter Ries <clip2@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 25 +++++++++++-----------
 1 file changed, 12 insertions(+), 13 deletions(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index 06fcd8f9323..6f11e029e8c 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -150,9 +150,8 @@ struct drv_cmd {
 	u32 val;
 };
 
-static long do_drv_read(void *_cmd)
+static void do_drv_read(struct drv_cmd *cmd)
 {
-	struct drv_cmd *cmd = _cmd;
 	u32 h;
 
 	switch (cmd->type) {
@@ -167,12 +166,10 @@ static long do_drv_read(void *_cmd)
 	default:
 		break;
 	}
-	return 0;
 }
 
-static long do_drv_write(void *_cmd)
+static void do_drv_write(struct drv_cmd *cmd)
 {
-	struct drv_cmd *cmd = _cmd;
 	u32 lo, hi;
 
 	switch (cmd->type) {
@@ -189,23 +186,30 @@ static long do_drv_write(void *_cmd)
 	default:
 		break;
 	}
-	return 0;
 }
 
 static void drv_read(struct drv_cmd *cmd)
 {
+	cpumask_t saved_mask = current->cpus_allowed;
 	cmd->val = 0;
 
-	work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd);
+	set_cpus_allowed_ptr(current, cmd->mask);
+	do_drv_read(cmd);
+	set_cpus_allowed_ptr(current, &saved_mask);
 }
 
 static void drv_write(struct drv_cmd *cmd)
 {
+	cpumask_t saved_mask = current->cpus_allowed;
 	unsigned int i;
 
 	for_each_cpu(i, cmd->mask) {
-		work_on_cpu(i, do_drv_write, cmd);
+		set_cpus_allowed_ptr(current, cpumask_of(i));
+		do_drv_write(cmd);
 	}
+
+	set_cpus_allowed_ptr(current, &saved_mask);
+	return;
 }
 
 static u32 get_cur_val(const struct cpumask *mask)
@@ -231,15 +235,10 @@ static u32 get_cur_val(const struct cpumask *mask)
 		return 0;
 	}
 
-	if (unlikely(!alloc_cpumask_var(&cmd.mask, GFP_KERNEL)))
-		return 0;
-
 	cpumask_copy(cmd.mask, mask);
 
 	drv_read(&cmd);
 
-	free_cpumask_var(cmd.mask);
-
 	dprintk("get_cur_val = %u\n", cmd.val);
 
 	return cmd.val;
-- 
GitLab


From e8cea892dff8e3ebed42954c46730309b617196f Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Mon, 12 Jan 2009 19:36:59 +0100
Subject: [PATCH 173/492] Revert "i386: add TRACE_IRQS_OFF for the nmi"

This reverts commit e0c7317557c8fc8eacf611e30c2a80f4e24e47a3.

This patch was wrong, as lockdep (and thus the irq state tracer)
aren't nmi safe. People are already seeing lockdep warnings due
to this.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/entry_32.S | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index d6f0490a739..46469029e9d 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -1203,7 +1203,6 @@ nmi_stack_correct:
 	pushl %eax
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
-	TRACE_IRQS_OFF
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
 	call do_nmi
@@ -1244,7 +1243,6 @@ nmi_espfix_stack:
 	pushl %eax
 	CFI_ADJUST_CFA_OFFSET 4
 	SAVE_ALL
-	TRACE_IRQS_OFF
 	FIXUP_ESPFIX_STACK		# %eax == %esp
 	xorl %edx,%edx			# zero error code
 	call do_nmi
-- 
GitLab


From 8476a6571005f9440adda08ca4d6c69c7f4db30b Mon Sep 17 00:00:00 2001
From: Erik Ekman <erik@kryo.se>
Date: Tue, 30 Dec 2008 22:49:28 +0100
Subject: [PATCH 174/492] Wireless: Fix Kconfig fact error

Raytheon cards use 2.4 GHz, not 2.4 MHz.
See http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Linux.Wireless.drivers.html#Raylink

Signed-off-by: Erik Ekman <erik@kryo.se>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index ea543fcf268..e4f9f747de8 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -111,7 +111,7 @@ config WLAN_80211
 	  lets you choose drivers.
 
 config PCMCIA_RAYCS
-	tristate "Aviator/Raytheon 2.4MHz wireless support"
+	tristate "Aviator/Raytheon 2.4GHz wireless support"
 	depends on PCMCIA && WLAN_80211
 	select WIRELESS_EXT
 	---help---
-- 
GitLab


From d1b29405bd3590bc97c4d3ff2c9139ca55e56ccd Mon Sep 17 00:00:00 2001
From: Andrew Price <andy@andrewprice.me.uk>
Date: Fri, 2 Jan 2009 08:05:27 +0000
Subject: [PATCH 175/492] rt2x00: Fix radio LED type check

Since "rt2x00: Fix LED state handling", rt2x00leds_led_radio wrongly
checks that the LED type is LED_TYPE_ASSOC. This patch makes it check
for LED_TYPE_RADIO once again.

Signed-off-by: Andrew Price <andy@andrewprice.me.uk>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00leds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00leds.c b/drivers/net/wireless/rt2x00/rt2x00leds.c
index 68f4e0fc35b..a0cd35b6beb 100644
--- a/drivers/net/wireless/rt2x00/rt2x00leds.c
+++ b/drivers/net/wireless/rt2x00/rt2x00leds.c
@@ -97,7 +97,7 @@ void rt2x00leds_led_assoc(struct rt2x00_dev *rt2x00dev, bool enabled)
 
 void rt2x00leds_led_radio(struct rt2x00_dev *rt2x00dev, bool enabled)
 {
-	if (rt2x00dev->led_radio.type == LED_TYPE_ASSOC)
+	if (rt2x00dev->led_radio.type == LED_TYPE_RADIO)
 		rt2x00led_led_simple(&rt2x00dev->led_radio, enabled);
 }
 
-- 
GitLab


From 51fb80fefe736db1182551fec6528d1ef095b0ea Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sat, 3 Jan 2009 12:45:12 -0600
Subject: [PATCH 176/492] p54usb: Fix to prevent SKB memory allocation errors
 with 4K page size

On x86_64 architecture with 4K page size and SLUB debugging enabled, stress
testing on p54usb has resulted in skb allocation failures of O(1) and extreme
page fragmentation. Reducing rx_mtu fixes this problem by reducing the size of
all receive skb allocations to be of O(0). This change does not impact
performance in any way.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54common.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 82354b974a0..06c64744df2 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -138,6 +138,7 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 	u8 *fw_version = NULL;
 	size_t len;
 	int i;
+	int maxlen;
 
 	if (priv->rx_start)
 		return 0;
@@ -195,6 +196,16 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 			else
 				priv->rx_mtu = (size_t)
 					0x620 - priv->tx_hdr_len;
+			maxlen = priv->tx_hdr_len + /* USB devices */
+				 sizeof(struct p54_rx_data) +
+				 4 + /* rx alignment */
+				 IEEE80211_MAX_FRAG_THRESHOLD;
+			if (priv->rx_mtu > maxlen && PAGE_SIZE == 4096) {
+				printk(KERN_INFO "p54: rx_mtu reduced from %d "
+					         "to %d\n", priv->rx_mtu,
+						 maxlen);
+				priv->rx_mtu = maxlen;
+			}
 			break;
 			}
 		case BR_CODE_EXPOSED_IF:
-- 
GitLab


From 3be36ae223271f9c2cfbe7406846c8fdcd2f50c3 Mon Sep 17 00:00:00 2001
From: Stefan Lippers-Hollmann <s.L-H@gmx.de>
Date: Sun, 4 Jan 2009 01:10:49 +0100
Subject: [PATCH 177/492] rt2x00: add USB ID for the Linksys WUSB200.

add USB ID for the Linksys WUSB200 Wireless-G Business USB Adapter to
rt73usb.

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Cc: stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt73usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index d638a8a5937..96a8d69f879 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2321,6 +2321,7 @@ static struct usb_device_id rt73usb_device_table[] = {
 	/* Linksys */
 	{ USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* MSI */
 	{ USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
-- 
GitLab


From 3ea96463156123cbfd09ac412012a87fef068830 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <ivdoorn@gmail.com>
Date: Sun, 4 Jan 2009 17:33:25 +0100
Subject: [PATCH 178/492] rt2x00: Fix TX short preamble detection

The short preamble mode was not correctly detected during TX,
rt2x00 used the rate->hw_value_short field but mac80211 is not
using this field that way.
Instead the flag IEEE80211_TX_RC_USE_SHORT_PREAMBLE should be
used to determine if the frame should be send out using
short preamble or not.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00dev.c   |  8 +++-----
 drivers/net/wireless/rt2x00/rt2x00lib.h   | 11 -----------
 drivers/net/wireless/rt2x00/rt2x00queue.c |  2 +-
 3 files changed, 4 insertions(+), 17 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 6d92542fcf0..87c0f2c8307 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -807,13 +807,11 @@ static void rt2x00lib_rate(struct ieee80211_rate *entry,
 {
 	entry->flags = 0;
 	entry->bitrate = rate->bitrate;
-	entry->hw_value = rt2x00_create_rate_hw_value(index, 0);
-	entry->hw_value_short = entry->hw_value;
+	entry->hw_value =index;
+	entry->hw_value_short = index;
 
-	if (rate->flags & DEV_RATE_SHORT_PREAMBLE) {
+	if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
 		entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
-		entry->hw_value_short |= rt2x00_create_rate_hw_value(index, 1);
-	}
 }
 
 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
index 03024327767..86cd26fbf76 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
@@ -52,22 +52,11 @@ struct rt2x00_rate {
 
 extern const struct rt2x00_rate rt2x00_supported_rates[12];
 
-static inline u16 rt2x00_create_rate_hw_value(const u16 index,
-					      const u16 short_preamble)
-{
-	return (short_preamble << 8) | (index & 0xff);
-}
-
 static inline const struct rt2x00_rate *rt2x00_get_rate(const u16 hw_value)
 {
 	return &rt2x00_supported_rates[hw_value & 0xff];
 }
 
-static inline int rt2x00_get_rate_preamble(const u16 hw_value)
-{
-	return (hw_value & 0xff00);
-}
-
 /*
  * Radio control handlers.
  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index eaec6bd93ed..746a8f36b93 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -313,7 +313,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
 		 * When preamble is enabled we should set the
 		 * preamble bit for the signal.
 		 */
-		if (rt2x00_get_rate_preamble(rate->hw_value))
+		if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
 			txdesc->signal |= 0x08;
 	}
 }
-- 
GitLab


From 878e6a432f85690a2c0d88d96f177e54ff1d4a57 Mon Sep 17 00:00:00 2001
From: Michiel <michiel@ettema.net>
Date: Sun, 4 Jan 2009 17:22:28 -0600
Subject: [PATCH 179/492] p54usb: Add USB ID for Thomson Speedtouch 121g

Add the USB ID for Thomson Speedtouch 121g to p54usb.

Signed-off-by: Michiel <michiel@ettema.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index c44a200059d..8f5c063b854 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -56,6 +56,7 @@ static struct usb_device_id p54u_table[] __devinitdata = {
 	{USB_DEVICE(0x050d, 0x7050)},	/* Belkin F5D7050 ver 1000 */
 	{USB_DEVICE(0x0572, 0x2000)},	/* Cohiba Proto board */
 	{USB_DEVICE(0x0572, 0x2002)},	/* Cohiba Proto board */
+	{USB_DEVICE(0x06b9, 0x0121)},	/* Thomson SpeedTouch 121g */
 	{USB_DEVICE(0x0707, 0xee13)},   /* SMC 2862W-G version 2 */
 	{USB_DEVICE(0x083a, 0x4521)},   /* Siemens Gigaset USB Adapter 54 version 2 */
 	{USB_DEVICE(0x0846, 0x4240)},	/* Netgear WG111 (v2) */
-- 
GitLab


From 176ddc7dcfe3fd93778f52abf9a947d92932f19e Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Mon, 5 Jan 2009 13:51:24 +0200
Subject: [PATCH 180/492] ath9k: Enforce module build if rfkill is a module

CONFIG_ATH9K=y results in build issues if CONFIG_RFKILL=m since ath9k
does not depend on rfkill in kconfig (i.e., CONFIG_RFKILL is used to
select whether to enable rfkill in ath9k), but uses its functions if
rfkill is enabled. Enforce ath9k to be build as a module if
CONFIG_RFKILL=m to avoid this invalid configuration.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath9k/Kconfig b/drivers/net/wireless/ath9k/Kconfig
index c43bd321f97..90a8dd87378 100644
--- a/drivers/net/wireless/ath9k/Kconfig
+++ b/drivers/net/wireless/ath9k/Kconfig
@@ -1,6 +1,7 @@
 config ATH9K
 	tristate "Atheros 802.11n wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211
+	depends on RFKILL || RFKILL=n
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
-- 
GitLab


From 20953ad68ee522f6420b63c200ac9b23f96d937a Mon Sep 17 00:00:00 2001
From: David Kilroy <kilroyd@googlemail.com>
Date: Wed, 7 Jan 2009 00:23:55 +0000
Subject: [PATCH 181/492] orinoco: take the driver lock in the rx tasklet

Fix the warning reproduced below.

We add to rx_list in interrupt context and remove elements in tasklet
context. While removing elements we need to prevent the interrupt
modifying the list.

Note that "orinoco: Process bulk of receive interrupt in a tasklet" did not
preserve locking semantics on what is now orinoco_rx.

This patch reinstates the locking semantics and ensures it covers
rx_list as well. This leads to additional cleanup required in
free_orinocodev.

[89479.105038] WARNING: at lib/list_debug.c:30 __list_add+0x8f/0xa0()
[89479.105058] list_add corruption. prev->next should be next (dddb3568), but was cbc28978. (prev=dddb3568).
[89479.106002] Pid: 15746, comm: X Not tainted 2.6.28-1avb #26
[89479.106020] Call Trace:
[89479.106062]  [<c011d3b0>] warn_slowpath+0x60/0x80
[89479.106104]  [<c01073d0>] ? native_sched_clock+0x20/0x70
[89479.106194]  [<c013d825>] ? lock_release_holdtime+0x35/0x200
[89479.106218]  [<c018d9f0>] ? __slab_alloc+0x550/0x560
[89479.106254]  [<c02f9c9d>] ? _spin_unlock+0x1d/0x20
[89479.106270]  [<c018d9f0>] ? __slab_alloc+0x550/0x560
[89479.106302]  [<c01ff2a7>] ? delay_tsc+0x17/0x24
[89479.106319]  [<c01ff221>] ? __const_udelay+0x21/0x30
[89479.106376]  [<dfa8b1e2>] ? hermes_bap_seek+0x112/0x1e0 [hermes]
[89479.106396]  [<c013d7eb>] ? trace_hardirqs_off+0xb/0x10
[89479.106418]  [<c018e307>] ? __kmalloc_track_caller+0xb7/0x110
[89479.106448]  [<c028eefc>] ? dev_alloc_skb+0x1c/0x30
[89479.106465]  [<c028eefc>] ? dev_alloc_skb+0x1c/0x30
[89479.106482]  [<c020e13f>] __list_add+0x8f/0xa0
[89479.106551]  [<dfd0fcae>] orinoco_interrupt+0xcae/0x16c0 [orinoco]
[89479.106574]  [<c013b0e3>] ? tick_dev_program_event+0x33/0xb0
[89479.106594]  [<c01073d0>] ? native_sched_clock+0x20/0x70
[89479.106613]  [<c013d825>] ? lock_release_holdtime+0x35/0x200
[89479.106662]  [<c013d7eb>] ? trace_hardirqs_off+0xb/0x10
[89479.106892]  [<dfe7faa7>] ? usb_hcd_irq+0x97/0xa0 [usbcore]
[89479.106926]  [<c015ba79>] handle_IRQ_event+0x29/0x60
[89479.106947]  [<c015cf89>] handle_level_irq+0x69/0xe0
[89479.106963]  [<c015cf20>] ? handle_level_irq+0x0/0xe0
[89479.106977]  <IRQ>  [<c02ca933>] ? tcp_v4_rcv+0x633/0x6e0
[89479.107025]  [<c0103f0c>] ? common_interrupt+0x28/0x30
[89479.107057]  [<c02a0000>] ? sk_run_filter+0x320/0x7a0
[89479.107078]  [<c020e041>] ? list_del+0x21/0x90
[89479.107106]  [<dfd0d24e>] ? orinoco_rx_isr_tasklet+0x2ce/0x480 [orinoco]
[89479.107131]  [<c01402e0>] ? __lock_acquire+0x160/0x1650
[89479.107151]  [<c01073d0>] ? native_sched_clock+0x20/0x70
[89479.107169]  [<c013d825>] ? lock_release_holdtime+0x35/0x200
[89479.107200]  [<c012249a>] ? irq_enter+0xa/0x60
[89479.107217]  [<c0104e52>] ? do_IRQ+0xd2/0x130
[89479.107518]  [<c010342c>] ? restore_nocheck_notrace+0x0/0xe
[89479.107542]  [<c0122830>] ? __do_softirq+0x0/0x110
[89479.107561]  [<c013f7b4>] ? trace_hardirqs_on_caller+0x74/0x140
[89479.107583]  [<c01ff678>] ? trace_hardirqs_on_thunk+0xc/0x10
[89479.107602]  [<c0122087>] ? tasklet_action+0x27/0x90
[89479.107620]  [<c013f7b4>] ? trace_hardirqs_on_caller+0x74/0x140
[89479.107638]  [<c01220a3>] ? tasklet_action+0x43/0x90
[89479.107655]  [<c012289f>] ? __do_softirq+0x6f/0x110
[89479.107674]  [<c0122830>] ? __do_softirq+0x0/0x110
[89479.107685]  <IRQ>  [<c015cf20>] ? handle_level_irq+0x0/0xe0
[89479.107715]  [<c012246d>] ? irq_exit+0x5d/0x80
[89479.107732]  [<c0104e52>] ? do_IRQ+0xd2/0x130
[89479.107747]  [<c0103337>] ? sysenter_exit+0xf/0x16
[89479.107765]  [<c013f83d>] ? trace_hardirqs_on_caller+0xfd/0x140
[89479.107782]  [<c0103f0c>] ? common_interrupt+0x28/0x30
[89479.107797] ---[ end trace a1fc0a52df4a729d ]---

Reported-by: Andrey Borzenkov <arvidjaar@mail.ru>
Signed-off-by: David Kilroy <kilroyd@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/orinoco/orinoco.c | 28 +++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c
index bc84e2792f8..c3bb85e0251 100644
--- a/drivers/net/wireless/orinoco/orinoco.c
+++ b/drivers/net/wireless/orinoco/orinoco.c
@@ -1610,6 +1610,16 @@ static void orinoco_rx_isr_tasklet(unsigned long data)
 	struct orinoco_rx_data *rx_data, *temp;
 	struct hermes_rx_descriptor *desc;
 	struct sk_buff *skb;
+	unsigned long flags;
+
+	/* orinoco_rx requires the driver lock, and we also need to
+	 * protect priv->rx_list, so just hold the lock over the
+	 * lot.
+	 *
+	 * If orinoco_lock fails, we've unplugged the card. In this
+	 * case just abort. */
+	if (orinoco_lock(priv, &flags) != 0)
+		return;
 
 	/* extract desc and skb from queue */
 	list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
@@ -1622,6 +1632,8 @@ static void orinoco_rx_isr_tasklet(unsigned long data)
 
 		kfree(desc);
 	}
+
+	orinoco_unlock(priv, &flags);
 }
 
 /********************************************************************/
@@ -3645,12 +3657,22 @@ struct net_device
 void free_orinocodev(struct net_device *dev)
 {
 	struct orinoco_private *priv = netdev_priv(dev);
+	struct orinoco_rx_data *rx_data, *temp;
 
-	/* No need to empty priv->rx_list: if the tasklet is scheduled
-	 * when we call tasklet_kill it will run one final time,
-	 * emptying the list */
+	/* If the tasklet is scheduled when we call tasklet_kill it
+	 * will run one final time. However the tasklet will only
+	 * drain priv->rx_list if the hw is still available. */
 	tasklet_kill(&priv->rx_tasklet);
 
+	/* Explicitly drain priv->rx_list */
+	list_for_each_entry_safe(rx_data, temp, &priv->rx_list, list) {
+		list_del(&rx_data->list);
+
+		dev_kfree_skb(rx_data->skb);
+		kfree(rx_data->desc);
+		kfree(rx_data);
+	}
+
 	unregister_pm_notifier(&priv->pm_notifier);
 	orinoco_uncache_fw(priv);
 
-- 
GitLab


From 86060f0d691f5ee1b4ef4efe770b683e54ac438d Mon Sep 17 00:00:00 2001
From: Sujith <Sujith.Manoharan@atheros.com>
Date: Wed, 7 Jan 2009 14:25:29 +0530
Subject: [PATCH 182/492] ath9k: Fix chainmask handling bug

The chainmasks have to be updated before setting the channel,
since the HW reset routine uses them to set the appropriate registers.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 191eec50dc7..727f067aca4 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -2164,13 +2164,13 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 						    conf->ht.channel_type);
 		}
 
+		ath_update_chainmask(sc, conf->ht.enabled);
+
 		if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) {
 			DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
 			mutex_unlock(&sc->mutex);
 			return -EINVAL;
 		}
-
-		ath_update_chainmask(sc, conf->ht.enabled);
 	}
 
 	if (changed & IEEE80211_CONF_CHANGE_POWER)
-- 
GitLab


From d732129b25b972c208c9705759c8c64f63a21800 Mon Sep 17 00:00:00 2001
From: Samuel Ortiz <sameo@linux.intel.com>
Date: Thu, 8 Jan 2009 10:20:00 -0800
Subject: [PATCH 183/492] iwlwifi: Fix get_cmd_string() for REPLY_3945_RX

0x1b is a 3945 specific command, we should print it too when debugging.

Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-hcmd.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 01a2169cece..8c71ad4f88c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -51,6 +51,7 @@ const char *get_cmd_string(u8 cmd)
 		IWL_CMD(REPLY_REMOVE_STA);
 		IWL_CMD(REPLY_REMOVE_ALL_STA);
 		IWL_CMD(REPLY_WEPKEY);
+		IWL_CMD(REPLY_3945_RX);
 		IWL_CMD(REPLY_TX);
 		IWL_CMD(REPLY_RATE_SCALE);
 		IWL_CMD(REPLY_LEDS_CMD);
-- 
GitLab


From 706ea9b66935e341b063d860c9c8f279b37b5578 Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Fri, 9 Jan 2009 12:31:48 -0500
Subject: [PATCH 184/492] orinoco_cs: add ID for ARtem Onair Comcard 11

Reported by Michael Jarosch <mitsch@riotmusic.de>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/orinoco/orinoco_cs.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index f127602670e..0b32215d3f5 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -435,6 +435,7 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
 	PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
 	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
+	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0003), /* ARtem Onair Comcard 11 */
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
-- 
GitLab


From c1d34c1dad76be6d515ef33e24eb92f10547b08b Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Sat, 20 Dec 2008 02:21:37 +0100
Subject: [PATCH 185/492] p54: crypto offload fixes

This patch fixes two small flaws:
 - restore the original TKIP IV if we altered it.
 - reserve & initialize ICV with zeros.
   This is actually only necessary for some obsolete p54usb firmwares.
   But we don't know yet, if all devices are compatible with the new revisions.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54common.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 06c64744df2..37294a657f8 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -809,6 +809,16 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 			info->flags |= IEEE80211_TX_STAT_TX_FILTERED;
 		info->status.ack_signal = p54_rssi_to_dbm(dev,
 				(int)payload->ack_rssi);
+
+		if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) {
+			u8 *iv = (u8 *)(entry_data->align + pad +
+				        entry_data->crypt_offset);
+
+			/* Restore the original TKIP IV. */
+			iv[2] = iv[0];
+			iv[0] = iv[1];
+			iv[1] = (iv[0] | 0x20) & 0x7f;	/* WEPSeed - 8.3.2.2 */
+		}
 		skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data));
 		ieee80211_tx_status_irqsafe(dev, entry);
 		goto out;
@@ -1394,7 +1404,6 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	hdr->tries = ridx;
 	txhdr->rts_rate_idx = 0;
 	if (info->control.hw_key) {
-		crypt_offset += info->control.hw_key->iv_len;
 		txhdr->key_type = p54_convert_algo(info->control.hw_key->alg);
 		txhdr->key_len = min((u8)16, info->control.hw_key->keylen);
 		memcpy(txhdr->key, info->control.hw_key->key, txhdr->key_len);
@@ -1408,6 +1417,8 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 		}
 		/* reserve some space for ICV */
 		len += info->control.hw_key->icv_len;
+		memset(skb_put(skb, info->control.hw_key->icv_len), 0,
+		       info->control.hw_key->icv_len);
 	} else {
 		txhdr->key_type = 0;
 		txhdr->key_len = 0;
-- 
GitLab


From 00627f229c9807e4cb825a7ce36b886e2adf2229 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Sat, 20 Dec 2008 02:21:56 +0100
Subject: [PATCH 186/492] p54usb: fix random traffic stalls (LM87)

All LM87 firmwares need a explicit termination "packet",
in oder to finish the pending transfer properly.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54usb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 8f5c063b854..6a6a72f6f82 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -285,6 +285,7 @@ static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb)
 	usb_fill_bulk_urb(data_urb, priv->udev,
 			  usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA),
 			  skb->data, skb->len, p54u_tx_cb, skb);
+	data_urb->transfer_flags |= URB_ZERO_PACKET;
 
 	usb_anchor_urb(data_urb, &priv->submitted);
 	if (usb_submit_urb(data_urb, GFP_ATOMIC)) {
-- 
GitLab


From d15cfc3ac77388f1d588c57743d5f26b15eba9a8 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <ivdoorn@gmail.com>
Date: Sat, 20 Dec 2008 11:00:23 +0100
Subject: [PATCH 187/492] rt2x00: Fix segementation fault

The queue_end() macro points to 1 position after the
queue, which means that if we want to know if queue
is at the end of the queue we should first increment
the position and then check if it is a valid entry.

This fixes a segmentation fault which only occurs when
the device has enough endpoints to provide a dedicated
endpoint for all TX queues (which likely won't happen
for rt2500usb and rt73usb, but will happen for rt2800usb).

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00usb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 83df312ac56..0b29d767a25 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -434,11 +434,11 @@ static int rt2x00usb_find_endpoints(struct rt2x00_dev *rt2x00dev)
 
 		if (usb_endpoint_is_bulk_in(ep_desc)) {
 			rt2x00usb_assign_endpoint(rt2x00dev->rx, ep_desc);
-		} else if (usb_endpoint_is_bulk_out(ep_desc)) {
+		} else if (usb_endpoint_is_bulk_out(ep_desc) &&
+			   (queue != queue_end(rt2x00dev))) {
 			rt2x00usb_assign_endpoint(queue, ep_desc);
+			queue = queue_next(queue);
 
-			if (queue != queue_end(rt2x00dev))
-				queue = queue_next(queue);
 			tx_ep_desc = ep_desc;
 		}
 	}
-- 
GitLab


From 1061787967db03975dc02030d6815811f4eb9231 Mon Sep 17 00:00:00 2001
From: Daniel Wu <dyqith@gmail.com>
Date: Sat, 20 Dec 2008 10:53:29 -0800
Subject: [PATCH 188/492] iwlwifi: Fix typo in iwl-commands.h for CCK rate bit
 range.

My first (minor) patch, hopefully this is correct.

Fix a typo in iwl-commands.h for CCK rates which needs 7 bits and not 4.

Signed-off-by: Daniel Wu <dyqith@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-commands.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 52966ffbef6..ba997204c8d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -255,7 +255,7 @@ struct iwl_cmd_header {
  *        0x3)  54 Mbps
  *
  * Legacy CCK rate format for bits 7:0 (bit 8 must be "0", bit 9 "1"):
- *  3-0:   10)  1 Mbps
+ *  6-0:   10)  1 Mbps
  *         20)  2 Mbps
  *         55)  5.5 Mbps
  *        110)  11 Mbps
-- 
GitLab


From b55eae3349ff5d6d088c7ab0151260d5e3dbd26d Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sun, 21 Dec 2008 15:40:33 -0600
Subject: [PATCH 189/492] rtl8180: Fix to add STA mode

To be compatible with mac80211 following "mac80211: only create
default STA interface if supported", rtl8180 needs to set
NL80211_IFTYPE_STATION in interface_modes.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Reported-by: Fabio Rossi <rossi.f@inwind.it>
Tested-by: Piter PUNK <piterpunk@unitednerds.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8180_dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c
index 5f887fb137a..387c133ec0f 100644
--- a/drivers/net/wireless/rtl818x/rtl8180_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c
@@ -897,6 +897,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
 	dev->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
 		     IEEE80211_HW_RX_INCLUDES_FCS |
 		     IEEE80211_HW_SIGNAL_UNSPEC;
+	dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	dev->queues = 1;
 	dev->max_signal = 65;
 
-- 
GitLab


From f3d340c1d536fd3e5a104c99ac9c3f8694270d72 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <ivdoorn@gmail.com>
Date: Sun, 21 Dec 2008 23:19:17 +0100
Subject: [PATCH 190/492] Fix rt2500usb HW crypto: TKIP

rt2500usb doesn't strip the IV/ICV data from received frames,
so we don't need to set the RX_FLAG_IV_STRIPPED flag.
We do need to set the RX_FLAG_MMIC_STRIPPED flag for all
encryption types since the MMIC has been removed from the frame.

After this patch TKIP Hardware crypto works for rt2500usb.
WEP and AES are still failing.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2500usb.c | 19 ++++++-------------
 1 file changed, 6 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 30028e2422f..065f111f01f 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -376,11 +376,11 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
 
 		/*
 		 * The driver does not support the IV/EIV generation
-		 * in hardware. However it doesn't support the IV/EIV
-		 * inside the ieee80211 frame either, but requires it
-		 * to be provided seperately for the descriptor.
-		 * rt2x00lib will cut the IV/EIV data out of all frames
-		 * given to us by mac80211, but we must tell mac80211
+		 * in hardware. However it demands the data to be provided
+		 * both seperately as well as inside the frame.
+		 * We already provided the CONFIG_CRYPTO_COPY_IV to rt2x00lib
+		 * to ensure rt2x00lib will not strip the data from the
+		 * frame after the copy, now we must tell mac80211
 		 * to generate the IV/EIV data.
 		 */
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
@@ -1334,14 +1334,7 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
 
 		/* ICV is located at the end of frame */
 
-		/*
-		 * Hardware has stripped IV/EIV data from 802.11 frame during
-		 * decryption. It has provided the data seperately but rt2x00lib
-		 * should decide if it should be reinserted.
-		 */
-		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
-		if (rxdesc->cipher != CIPHER_TKIP)
-			rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
+		rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
 		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
 			rxdesc->flags |= RX_FLAG_DECRYPTED;
 		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
-- 
GitLab


From d3a1db1c67735063921d9186145fc86164cf9781 Mon Sep 17 00:00:00 2001
From: Senthil Balasubramanian <senthilkumar@atheros.com>
Date: Mon, 22 Dec 2008 16:31:58 +0530
Subject: [PATCH 191/492] ath9k: Fix incorrect sequence numbering for
 unaggregated QoS Frame.

This patch fixes an issue with the sequence numbers of unaggregated
QoS frames, because of which the frames are handled in a different order
at the AP and resulted in MLME REPLAYFAILURE.

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/xmit.c | 38 ++++++++++++++-----------------
 1 file changed, 17 insertions(+), 21 deletions(-)

diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 3bfc3b90f25..1ea9428c0cd 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -264,25 +264,22 @@ static void assign_aggr_tid_seqno(struct sk_buff *skb,
 	}
 
 	/* Get seqno */
-
-	if (ieee80211_is_data(fc) && !is_pae(skb)) {
-		/* For HT capable stations, we save tidno for later use.
-		 * We also override seqno set by upper layer with the one
-		 * in tx aggregation state.
-		 *
-		 * If fragmentation is on, the sequence number is
-		 * not overridden, since it has been
-		 * incremented by the fragmentation routine.
-		 *
-		 * FIXME: check if the fragmentation threshold exceeds
-		 * IEEE80211 max.
-		 */
-		tid = ATH_AN_2_TID(an, bf->bf_tidno);
-		hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
-					    IEEE80211_SEQ_SEQ_SHIFT);
-		bf->bf_seqno = tid->seq_next;
-		INCR(tid->seq_next, IEEE80211_SEQ_MAX);
-	}
+	/* For HT capable stations, we save tidno for later use.
+	 * We also override seqno set by upper layer with the one
+	 * in tx aggregation state.
+	 *
+	 * If fragmentation is on, the sequence number is
+	 * not overridden, since it has been
+	 * incremented by the fragmentation routine.
+	 *
+	 * FIXME: check if the fragmentation threshold exceeds
+	 * IEEE80211 max.
+	 */
+	tid = ATH_AN_2_TID(an, bf->bf_tidno);
+	hdr->seq_ctrl = cpu_to_le16(tid->seq_next <<
+			IEEE80211_SEQ_SEQ_SHIFT);
+	bf->bf_seqno = tid->seq_next;
+	INCR(tid->seq_next, IEEE80211_SEQ_MAX);
 }
 
 static int setup_tx_flags(struct ath_softc *sc, struct sk_buff *skb,
@@ -1718,11 +1715,10 @@ static int ath_tx_setup_buffer(struct ath_softc *sc, struct ath_buf *bf,
 
 	/* Assign seqno, tidno */
 
-	if (bf_isht(bf) && (sc->sc_flags & SC_OP_TXAGGR))
+	if (ieee80211_is_data_qos(fc) && (sc->sc_flags & SC_OP_TXAGGR))
 		assign_aggr_tid_seqno(skb, bf);
 
 	/* DMA setup */
-
 	bf->bf_mpdu = skb;
 
 	bf->bf_dmacontext = pci_map_single(sc->pdev, skb->data,
-- 
GitLab


From d57854bb1d78ba89ffbfdfd1c3e95b52ed7478ff Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Mon, 22 Dec 2008 15:35:31 +0100
Subject: [PATCH 192/492] minstrel: fix warning if lowest supported rate index
 is not 0

This patch fixes the following WARNING (caused by rix_to_ndx): "
>WARNING: at net/mac80211/rc80211_minstrel.c:69 minstrel_rate_init+0xd2/0x33a [mac80211]()
>[...]
>Call Trace:
> warn_on_slowpath+0x51/0x75
> _format_mac_addr+0x4c/0x88
> minstrel_rate_init+0xd2/0x33a [mac80211]
> print_mac+0x16/0x1b
> schedule_hrtimeout_range+0xdc/0x107
> ieee80211_add_station+0x158/0x1bd [mac80211]
> nl80211_new_station+0x1b3/0x20b [cfg80211]

The reason is that I'm experimenting with "g" only mode on a 802.11 b/g card.

Therefore rate_lowest_index returns 4 (= 6Mbit, instead of usual 0 = 1Mbit).
Since mi->r array is initialized with zeros in minstrel_alloc_sta,
rix_to_ndx has a hard time to find the 6Mbit entry and will trigged the WARNING.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Acked-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/rc80211_minstrel.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 2b3b490a607..3824990d340 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -395,13 +395,15 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband,
 {
 	struct minstrel_sta_info *mi = priv_sta;
 	struct minstrel_priv *mp = priv;
-	struct minstrel_rate *mr_ctl;
+	struct ieee80211_local *local = hw_to_local(mp->hw);
+	struct ieee80211_rate *ctl_rate;
 	unsigned int i, n = 0;
 	unsigned int t_slot = 9; /* FIXME: get real slot time */
 
 	mi->lowest_rix = rate_lowest_index(sband, sta);
-	mr_ctl = &mi->r[rix_to_ndx(mi, mi->lowest_rix)];
-	mi->sp_ack_dur = mr_ctl->ack_time;
+	ctl_rate = &sband->bitrates[mi->lowest_rix];
+	mi->sp_ack_dur = ieee80211_frame_duration(local, 10, ctl_rate->bitrate,
+				!!(ctl_rate->flags & IEEE80211_RATE_ERP_G), 1);
 
 	for (i = 0; i < sband->n_bitrates; i++) {
 		struct minstrel_rate *mr = &mi->r[n];
@@ -416,7 +418,7 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband,
 
 		mr->rix = i;
 		mr->bitrate = sband->bitrates[i].bitrate / 5;
-		calc_rate_durations(mi, hw_to_local(mp->hw), mr,
+		calc_rate_durations(mi, local, mr,
 				&sband->bitrates[i]);
 
 		/* calculate maximum number of retransmissions before
-- 
GitLab


From 157ec8768457e8177d281ae099fb1c321c9a16d7 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Mon, 22 Dec 2008 16:45:54 +0200
Subject: [PATCH 193/492] ath9k: Revert fix to TX status reporting for retries
 and MCS index

This patch reverts "ath9k: Fix TX status reporting for retries and MCS index"
because that change ended up breaking ath9k rate control. While the
MCS index reporting to mac80211 was indeed fixed by the patch, it did
not take into account that the ath9k rate control algorithm was
updating private tables based on this index and the index comes
through the rate control API call, i.e., based on mac80211 TX status
call. In addition, it looks like the "fix" to remove +1 from TX status
'count' field was not correct based on ieee80211_tx_status()
implementation that counts the total of count values, but starting
from -1, not 0.

The TX status reporting for frames using MCS needs to be fixed
somehow, but it does not look like there is any easy fix for the ath9k
rate control algorithm, so the best option now seems to be to revert the
change and bring it back once the rate control code is cleaned up to
handle this better.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/xmit.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 1ea9428c0cd..c92f0c6e4ad 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -126,15 +126,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 		tx_info->flags |= IEEE80211_TX_STAT_ACK;
 	}
 
-	tx_info->status.rates[0].count = tx_status->retries;
-	if (tx_info->status.rates[0].flags & IEEE80211_TX_RC_MCS) {
-		/* Change idx from internal table index to MCS index */
-		int idx = tx_info->status.rates[0].idx;
-		struct ath_rate_table *rate_table = sc->cur_rate_table;
-		if (idx >= 0 && idx < rate_table->rate_cnt)
-			tx_info->status.rates[0].idx =
-				rate_table->info[idx].ratecode & 0x7f;
-	}
+	tx_info->status.rates[0].count = tx_status->retries + 1;
 
 	hdrlen = ieee80211_get_hdrlen_from_skb(skb);
 	padsize = hdrlen & 3;
-- 
GitLab


From 4fb7404e0eaf574c00d01d2b1ce2615229b350cd Mon Sep 17 00:00:00 2001
From: Steve Brown <sbrown@cortland.com>
Date: Tue, 23 Dec 2008 07:57:05 -0500
Subject: [PATCH 194/492] ath5k: Correct usage of AR5K_CFG_ADHOC

This corrects usage of AR5K_CFG_ADHOC introduced in
"ath5k: Update PCU code". Also,
the name of the indicator is changed to AR5K_CFG_IBSS to more
accurately reflect its function. This change restores
beaconing in AP and mesh modes.

Signed-off-by: Steve Brown <sbrown@cortland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath5k/pcu.c | 4 ++--
 drivers/net/wireless/ath5k/reg.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath5k/pcu.c b/drivers/net/wireless/ath5k/pcu.c
index 0cac05c6a9c..75eb9f43c74 100644
--- a/drivers/net/wireless/ath5k/pcu.c
+++ b/drivers/net/wireless/ath5k/pcu.c
@@ -65,7 +65,7 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah)
 		if (ah->ah_version == AR5K_AR5210)
 			pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
 		else
-			AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_ADHOC);
+			AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
 		break;
 
 	case NL80211_IFTYPE_AP:
@@ -75,7 +75,7 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah)
 		if (ah->ah_version == AR5K_AR5210)
 			pcu_reg |= AR5K_STA_ID1_NO_PSPOLL;
 		else
-			AR5K_REG_ENABLE_BITS(ah, AR5K_CFG, AR5K_CFG_ADHOC);
+			AR5K_REG_DISABLE_BITS(ah, AR5K_CFG, AR5K_CFG_IBSS);
 		break;
 
 	case NL80211_IFTYPE_STATION:
diff --git a/drivers/net/wireless/ath5k/reg.h b/drivers/net/wireless/ath5k/reg.h
index 91aaeaf8819..9189ab13286 100644
--- a/drivers/net/wireless/ath5k/reg.h
+++ b/drivers/net/wireless/ath5k/reg.h
@@ -73,7 +73,7 @@
 #define	AR5K_CFG_SWRD		0x00000004	/* Byte-swap RX descriptor */
 #define	AR5K_CFG_SWRB		0x00000008	/* Byte-swap RX buffer */
 #define	AR5K_CFG_SWRG		0x00000010	/* Byte-swap Register access */
-#define AR5K_CFG_ADHOC		0x00000020 	/* AP/Adhoc indication [5211+] */
+#define AR5K_CFG_IBSS		0x00000020 	/* 0-BSS, 1-IBSS [5211+] */
 #define AR5K_CFG_PHY_OK		0x00000100	/* [5211+] */
 #define AR5K_CFG_EEBS		0x00000200	/* EEPROM is busy */
 #define	AR5K_CFG_CLKGD		0x00000400	/* Clock gated (Disable dynamic clock) */
-- 
GitLab


From dcebf45cdc8384be9009b2b9a825054b64742768 Mon Sep 17 00:00:00 2001
From: Pavel Roskin <proski@gnu.org>
Date: Mon, 22 Dec 2008 16:39:36 -0500
Subject: [PATCH 195/492] mac80211: allow mode change if IBSS is not allowed

Changing mode on an interface is not allowed if IBSS is disabled for the
current channel.  That restriction should only apply when switching to
the ad-hoc mode, as it was prior to "cfg80211: handle SIOCGIWMODE/SIOCSIWMODE".

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/iface.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 5abbc3f07dd..b9074824862 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -699,7 +699,8 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
 		return 0;
 
 	/* Setting ad-hoc mode on non-IBSS channel is not supported. */
-	if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS)
+	if (sdata->local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS &&
+	    type == NL80211_IFTYPE_ADHOC)
 		return -EOPNOTSUPP;
 
 	/*
-- 
GitLab


From 124b68e755c2ef9342d5d477142c499fd7901360 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Fri, 26 Dec 2008 19:09:45 +0100
Subject: [PATCH 196/492] p54: fix WARN_ON at line 2247 of net/mac80211/rx.c

This patch hopefully fixes a mac80211<->p54 interaction problem, which was
described by Larry Finger (ref: http://marc.info/?l=linux-wireless&m=123009889327707 )

I guess the warning was triggered by pending frames in the receive queue,
while we're doing a band change 5GHz.

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54common.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 37294a657f8..cba89ed0f57 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -586,6 +586,7 @@ static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
 	u16 freq = le16_to_cpu(hdr->freq);
 	size_t header_len = sizeof(*hdr);
 	u32 tsf32;
+	u8 rate = hdr->rate & 0xf;
 
 	/*
 	 * If the device is in a unspecified state we have to
@@ -614,8 +615,11 @@ static int p54_rx_data(struct ieee80211_hw *dev, struct sk_buff *skb)
 	rx_status.qual = (100 * hdr->rssi) / 127;
 	if (hdr->rate & 0x10)
 		rx_status.flag |= RX_FLAG_SHORTPRE;
-	rx_status.rate_idx = (dev->conf.channel->band == IEEE80211_BAND_2GHZ ?
-			hdr->rate : (hdr->rate - 4)) & 0xf;
+	if (dev->conf.channel->band == IEEE80211_BAND_5GHZ)
+		rx_status.rate_idx = (rate < 4) ? 0 : rate - 4;
+	else
+		rx_status.rate_idx = rate;
+
 	rx_status.freq = freq;
 	rx_status.band =  dev->conf.channel->band;
 	rx_status.antenna = hdr->antenna;
-- 
GitLab


From d6e2be988d5146d1faa8df895cd8b32106d987bd Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Mon, 5 Jan 2009 23:11:26 -0600
Subject: [PATCH 197/492] rtl8187: Fix module so that rmmod/insmod does not
 error

Due to misunderstanding of the returned values allowed for the tx callback
of mac80211, rtl8187 was using skb's that had been freed. This problem was
triggered when the module was sujected to a rmmod/insmod cycle.

After that was fixed, the modules would not work after the rmmod/insmod cycle
until the USB device was reset.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl818x/rtl8187_dev.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index 00ce3ef39ab..6ad6bac3770 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -213,7 +213,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
 		kfree_skb(skb);
-		return -ENOMEM;
+		return NETDEV_TX_OK;
 	}
 
 	flags = skb->len;
@@ -281,7 +281,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	}
 	usb_free_urb(urb);
 
-	return rc;
+	return NETDEV_TX_OK;
 }
 
 static void rtl8187_rx_cb(struct urb *urb)
@@ -1471,6 +1471,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf)
 	ieee80211_unregister_hw(dev);
 
 	priv = dev->priv;
+	usb_reset_device(priv->udev);
 	usb_put_dev(interface_to_usbdev(intf));
 	ieee80211_free_hw(dev);
 }
-- 
GitLab


From 71ef99c8b79ab07e1c79794085481464f9870d62 Mon Sep 17 00:00:00 2001
From: Bob Copeland <me@bobcopeland.com>
Date: Mon, 5 Jan 2009 20:46:34 -0500
Subject: [PATCH 198/492] ath5k: fix return values from ath5k_tx

Should return NETDEV_TX_{OK,BUSY} instead of 0,-1 (this doesn't change
any current functionality).

Changes-licensed-under: 3-Clause-BSD

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath5k/base.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 4af2607deec..8ef87356e08 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -2644,7 +2644,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		if (skb_headroom(skb) < padsize) {
 			ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
 				  " headroom to pad %d\n", hdrlen, padsize);
-			return -1;
+			return NETDEV_TX_BUSY;
 		}
 		skb_push(skb, padsize);
 		memmove(skb->data, skb->data+padsize, hdrlen);
@@ -2655,7 +2655,7 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
 		spin_unlock_irqrestore(&sc->txbuflock, flags);
 		ieee80211_stop_queue(hw, skb_get_queue_mapping(skb));
-		return -1;
+		return NETDEV_TX_BUSY;
 	}
 	bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
 	list_del(&bf->list);
@@ -2673,10 +2673,10 @@ ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 		sc->txbuf_len++;
 		spin_unlock_irqrestore(&sc->txbuflock, flags);
 		dev_kfree_skb_any(skb);
-		return 0;
+		return NETDEV_TX_OK;
 	}
 
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static int
-- 
GitLab


From b973c31a925c6753d84a100673f6b25546ec8b34 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Sat, 27 Dec 2008 22:19:49 +0100
Subject: [PATCH 199/492] mac80211: initialize RC data for all mesh links upon
 allocation

This patch fixes a panic that might occur, if the device is part of a mesh
and tries to send with a higher rate index than "0".

kernel BUG at net/mac80211/rate.c:239!
invalid opcode: 0000 [#1] SMP
[...]
 Call Trace:
 <IRQ> <0> ? invoke_tx_handlers+0x474/0xb57 [mac80211]
 ? __ieee80211_tx_prepare+0x260/0x2a8 [mac80211]
 ? ieee80211_master_start_xmit+0x300/0x43a [mac80211]
 ? __qdisc_run+0xde/0x1da
 ? net_tx_action+0xb4/0x102
 Kernel panic - not syncing: Fatal exception in interrupt

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mesh_plink.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 929ba542fd7..1159bdb4119 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -107,6 +107,7 @@ static struct sta_info *mesh_plink_alloc(struct ieee80211_sub_if_data *sdata,
 
 	sta->flags = WLAN_STA_AUTHORIZED;
 	sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
+	rate_control_rate_init(sta);
 
 	return sta;
 }
-- 
GitLab


From f1dd2b23badfe8a28910a78be24452c627c4b6f2 Mon Sep 17 00:00:00 2001
From: Ivo van Doorn <ivdoorn@gmail.com>
Date: Sat, 3 Jan 2009 16:27:14 +0100
Subject: [PATCH 200/492] rt2x00: Fix rt2500usb HW crypto: WEP 128 & AES

The TXD_W0_CIPHER field is a 1-bit field. It only acts as boolean value
to indicate if the frame must be encrypted or not.

The way rt2x00_set_field32() worked it would grab the least signifcant bit
from txdesc->cipher and use that as value. Because of that WEP 64 and TKIP
worked since they had odd-numbered values, while WEP 128 and AES were
even numbers and didn't work.

Correctly booleanize the txdecs->cipher value to allow the hardware to
encrypt the outgoing data. After this we can enable HW crypto by default again.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2500usb.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 065f111f01f..af6b5847be5 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -38,7 +38,7 @@
 /*
  * Allow hardware encryption to be disabled.
  */
-static int modparam_nohwcrypt = 1;
+static int modparam_nohwcrypt = 0;
 module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
 
@@ -1181,7 +1181,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
 			   test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
 	rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
 	rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
-	rt2x00_set_field32(&word, TXD_W0_CIPHER, txdesc->cipher);
+	rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher);
 	rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
 	rt2x00_desc_write(txd, 0, word);
 }
-- 
GitLab


From 51e99158d261a5ec5772ca89b935c3daa270b07c Mon Sep 17 00:00:00 2001
From: Andrey Yurovsky <andrey@cozybit.com>
Date: Mon, 5 Jan 2009 14:37:31 -0800
Subject: [PATCH 201/492] libertas_tf: return NETDEV_TX_OK in TX op

The TX op should return NETDEV_TX_OK or NETDEV_TX_BUSY.

Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas_tf/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c
index d1fc305de5f..e7289e2e7f1 100644
--- a/drivers/net/wireless/libertas_tf/main.c
+++ b/drivers/net/wireless/libertas_tf/main.c
@@ -206,7 +206,7 @@ static int lbtf_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	 * there are no buffered multicast frames to send
 	 */
 	ieee80211_stop_queues(priv->hw);
-	return 0;
+	return NETDEV_TX_OK;
 }
 
 static void lbtf_tx_work(struct work_struct *work)
-- 
GitLab


From 02603930da19fa447648952873e967fb9663ec18 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 18 Nov 2008 21:13:01 +0100
Subject: [PATCH 202/492] fbdev: atafb - Fix line length handling

  - Make sure par->next_line is always set (this was done for Falcon only),
    as all the text console drawing operations need a valid par->next_line,
  - Make sure fix->line_length is always set, as some userspace applications
    need it because they don't have fallback code for the case where it's zero.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/video/atafb.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 77eb8b34fbf..b7646ad71bb 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -614,7 +614,7 @@ static int tt_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
 	fix->xpanstep = 0;
 	fix->ypanstep = 1;
 	fix->ywrapstep = 0;
-	fix->line_length = 0;
+	fix->line_length = par->next_line;
 	fix->accel = FB_ACCEL_ATARIBLITT;
 	return 0;
 }
@@ -691,6 +691,7 @@ static int tt_decode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
 		return -EINVAL;
 	par->yres_virtual = yres_virtual;
 	par->screen_base = screen_base + var->yoffset * linelen;
+	par->next_line = linelen;
 	return 0;
 }
 
@@ -918,7 +919,7 @@ static int falcon_encode_fix(struct fb_fix_screeninfo *fix,
 		fix->visual = FB_VISUAL_TRUECOLOR;
 		fix->xpanstep = 2;
 	}
-	fix->line_length = 0;
+	fix->line_length = par->next_line;
 	fix->accel = FB_ACCEL_ATARIBLITT;
 	return 0;
 }
@@ -1852,7 +1853,7 @@ static int stste_encode_fix(struct fb_fix_screeninfo *fix,
 		fix->ypanstep = 0;
 	}
 	fix->ywrapstep = 0;
-	fix->line_length = 0;
+	fix->line_length = par->next_line;
 	fix->accel = FB_ACCEL_ATARIBLITT;
 	return 0;
 }
@@ -1910,6 +1911,7 @@ static int stste_decode_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	par->yres_virtual = yres_virtual;
 	par->screen_base = screen_base + var->yoffset * linelen;
+	par->next_line = linelen;
 	return 0;
 }
 
@@ -2169,7 +2171,7 @@ static int ext_encode_fix(struct fb_fix_screeninfo *fix, struct atafb_par *par)
 	fix->xpanstep = 0;
 	fix->ypanstep = 0;
 	fix->ywrapstep = 0;
-	fix->line_length = 0;
+	fix->line_length = par->next_line;
 	return 0;
 }
 
@@ -2184,6 +2186,8 @@ static int ext_decode_var(struct fb_var_screeninfo *var, struct atafb_par *par)
 	    var->xoffset > 0 ||
 	    var->yoffset > 0)
 		return -EINVAL;
+
+	par->next_line = external_xres_virtual * external_depth / 8;
 	return 0;
 }
 
-- 
GitLab


From 74511413dd0b8f6c9f5a47bf045eba434f4fdd2b Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 18 Nov 2008 21:13:01 +0100
Subject: [PATCH 203/492] fbdev: atafb - Fix 16 bpp console

  - 16 bpp must use the cfb_*() ops
  - 16 bpp needs to set up info->pseudo_palette[] (was fbcon_cfb16_cmap[] in
    2.4.x)
  - Kill commented out 2.4.x fbcon remnants

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/video/atafb.c | 74 ++++++++++++++++++-------------------------
 1 file changed, 30 insertions(+), 44 deletions(-)

diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index b7646ad71bb..f932c138fe1 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -149,6 +149,7 @@ static struct atafb_par {
 			short mono;
 			short ste_mode;
 			short bpp;
+			u32 pseudo_palette[16];
 		} falcon;
 #endif
 		/* Nothing needed for external mode */
@@ -885,10 +886,6 @@ static int vdl_prescale[4][3] = {
 /* Default hsync timing [mon_type] in picoseconds */
 static long h_syncs[4] = { 3000000, 4875000, 4000000, 4875000 };
 
-#ifdef FBCON_HAS_CFB16
-static u16 fbcon_cfb16_cmap[16];
-#endif
-
 static inline int hxx_prescale(struct falcon_hw *hw)
 {
 	return hw->ste_mode ? 16
@@ -1736,10 +1733,10 @@ static int falcon_setcolreg(unsigned int regno, unsigned int red,
 			(((red & 0xe000) >> 13) | ((red & 0x1000) >> 12) << 8) |
 			(((green & 0xe000) >> 13) | ((green & 0x1000) >> 12) << 4) |
 			((blue & 0xe000) >> 13) | ((blue & 0x1000) >> 12);
-#ifdef FBCON_HAS_CFB16
-		fbcon_cfb16_cmap[regno] = ((red & 0xf800) |
-					   ((green & 0xfc00) >> 5) |
-					   ((blue & 0xf800) >> 11));
+#ifdef ATAFB_FALCON
+		((u32 *)info->pseudo_palette)[regno] = ((red & 0xf800) |
+						       ((green & 0xfc00) >> 5) |
+						       ((blue & 0xf800) >> 11));
 #endif
 	}
 	return 0;
@@ -2447,42 +2444,6 @@ static void atafb_set_disp(struct fb_info *info)
 	atafb_get_fix(&info->fix, info);
 
 	info->screen_base = (void *)info->fix.smem_start;
-
-	switch (info->fix.type) {
-	case FB_TYPE_INTERLEAVED_PLANES:
-		switch (info->var.bits_per_pixel) {
-		case 2:
-			// display->dispsw = &fbcon_iplan2p2;
-			break;
-		case 4:
-			// display->dispsw = &fbcon_iplan2p4;
-			break;
-		case 8:
-			// display->dispsw = &fbcon_iplan2p8;
-			break;
-		}
-		break;
-	case FB_TYPE_PACKED_PIXELS:
-		switch (info->var.bits_per_pixel) {
-#ifdef FBCON_HAS_MFB
-		case 1:
-			// display->dispsw = &fbcon_mfb;
-			break;
-#endif
-#ifdef FBCON_HAS_CFB8
-		case 8:
-			// display->dispsw = &fbcon_cfb8;
-			break;
-#endif
-#ifdef FBCON_HAS_CFB16
-		case 16:
-			// display->dispsw = &fbcon_cfb16;
-			// display->dispsw_data = fbcon_cfb16_cmap;
-			break;
-#endif
-		}
-		break;
-	}
 }
 
 static int atafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
@@ -2553,6 +2514,13 @@ static void atafb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
 	if (!rect->width || !rect->height)
 		return;
 
+#ifdef ATAFB_FALCON
+	if (info->var.bits_per_pixel == 16) {
+		cfb_fillrect(info, rect);
+		return;
+	}
+#endif
+
 	/*
 	 * We could use hardware clipping but on many cards you get around
 	 * hardware clipping by writing to framebuffer directly.
@@ -2587,6 +2555,13 @@ static void atafb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
 	u32 dx, dy, sx, sy, width, height;
 	int rev_copy = 0;
 
+#ifdef ATAFB_FALCON
+	if (info->var.bits_per_pixel == 16) {
+		cfb_copyarea(info, area);
+		return;
+	}
+#endif
+
 	/* clip the destination */
 	x2 = area->dx + area->width;
 	y2 = area->dy + area->height;
@@ -2636,6 +2611,13 @@ static void atafb_imageblit(struct fb_info *info, const struct fb_image *image)
 	const char *src;
 	u32 dx, dy, width, height, pitch;
 
+#ifdef ATAFB_FALCON
+	if (info->var.bits_per_pixel == 16) {
+		cfb_imageblit(info, image);
+		return;
+	}
+#endif
+
 	/*
 	 * We could use hardware clipping but on many cards you get around
 	 * hardware clipping by writing to framebuffer directly like we are
@@ -3229,6 +3211,10 @@ int __init atafb_init(void)
 	// tries to read from HW which may not be initialized yet
 	// so set sane var first, then call atafb_set_par
 	atafb_get_var(&fb_info.var, &fb_info);
+
+#ifdef ATAFB_FALCON
+	fb_info.pseudo_palette = current_par.hw.falcon.pseudo_palette;
+#endif
 	fb_info.flags = FBINFO_FLAG_DEFAULT;
 
 	if (!fb_find_mode(&fb_info.var, &fb_info, mode_option, atafb_modedb,
-- 
GitLab


From 8280eb8a33d60be4f5fa76d5144f66656c71a680 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sun, 4 Jan 2009 11:42:16 +0100
Subject: [PATCH 204/492] fbdev: c2p - Correct indentation

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/video/c2p.c | 238 ++++++++++++++++++++++----------------------
 1 file changed, 120 insertions(+), 118 deletions(-)

diff --git a/drivers/video/c2p.c b/drivers/video/c2p.c
index 376bc07ff95..f102b578ce1 100644
--- a/drivers/video/c2p.c
+++ b/drivers/video/c2p.c
@@ -21,71 +21,71 @@
      *  Basic transpose step
      */
 
-#define _transp(d, i1, i2, shift, mask)			\
-    do {						\
-	u32 t = (d[i1] ^ (d[i2] >> shift)) & mask;	\
-	d[i1] ^= t;					\
-	d[i2] ^= t << shift;				\
-    } while (0)
+#define _transp(d, i1, i2, shift, mask)				\
+	do {							\
+		u32 t = (d[i1] ^ (d[i2] >> shift)) & mask;	\
+		d[i1] ^= t;					\
+		d[i2] ^= t << shift;				\
+	} while (0)
 
 static inline u32 get_mask(int n)
 {
-    switch (n) {
+	switch (n) {
 	case 1:
-	    return 0x55555555;
-	    break;
+		return 0x55555555;
+		break;
 
 	case 2:
-	    return 0x33333333;
-	    break;
+		return 0x33333333;
+		break;
 
 	case 4:
-	    return 0x0f0f0f0f;
-	    break;
+		return 0x0f0f0f0f;
+		break;
 
 	case 8:
-	    return 0x00ff00ff;
-	    break;
+		return 0x00ff00ff;
+		break;
 
 	case 16:
-	    return 0x0000ffff;
-	    break;
-    }
-    return 0;
+		return 0x0000ffff;
+		break;
+	}
+	return 0;
 }
 
-#define transp_nx1(d, n)				\
-    do {						\
-	u32 mask = get_mask(n);				\
-	/* First block */				\
-	_transp(d, 0, 1, n, mask);			\
-	/* Second block */				\
-	_transp(d, 2, 3, n, mask);			\
-	/* Third block */				\
-	_transp(d, 4, 5, n, mask);			\
-	/* Fourth block */				\
-	_transp(d, 6, 7, n, mask);			\
-    } while (0)
-
-#define transp_nx2(d, n)				\
-    do {						\
-	u32 mask = get_mask(n);				\
-	/* First block */				\
-	_transp(d, 0, 2, n, mask);			\
-	_transp(d, 1, 3, n, mask);			\
-	/* Second block */				\
-	_transp(d, 4, 6, n, mask);			\
-	_transp(d, 5, 7, n, mask);			\
-    } while (0)
-
-#define transp_nx4(d, n)				\
-    do {						\
-	u32 mask = get_mask(n);				\
-	_transp(d, 0, 4, n, mask);			\
-	_transp(d, 1, 5, n, mask);			\
-	_transp(d, 2, 6, n, mask);			\
-	_transp(d, 3, 7, n, mask);			\
-    } while (0)
+#define transp_nx1(d, n)					\
+	do {							\
+		u32 mask = get_mask(n);				\
+		/* First block */				\
+		_transp(d, 0, 1, n, mask);			\
+		/* Second block */				\
+		_transp(d, 2, 3, n, mask);			\
+		/* Third block */				\
+		_transp(d, 4, 5, n, mask);			\
+		/* Fourth block */				\
+		_transp(d, 6, 7, n, mask);			\
+	} while (0)
+
+#define transp_nx2(d, n)					\
+	do {							\
+		u32 mask = get_mask(n);				\
+		/* First block */				\
+		_transp(d, 0, 2, n, mask);			\
+		_transp(d, 1, 3, n, mask);			\
+		/* Second block */				\
+		_transp(d, 4, 6, n, mask);			\
+		_transp(d, 5, 7, n, mask);			\
+	} while (0)
+
+#define transp_nx4(d, n)					\
+	do {							\
+		u32 mask = get_mask(n);				\
+		_transp(d, 0, 4, n, mask);			\
+		_transp(d, 1, 5, n, mask);			\
+		_transp(d, 2, 6, n, mask);			\
+		_transp(d, 3, 7, n, mask);			\
+	} while (0)
 
 #define transp(d, n, m)	transp_nx ## m(d, n)
 
@@ -99,11 +99,11 @@ static inline u32 get_mask(int n)
 
 static void c2p_8bpp(u32 d[8])
 {
-    transp(d, 16, 4);
-    transp(d, 8, 2);
-    transp(d, 4, 1);
-    transp(d, 2, 4);
-    transp(d, 1, 2);
+	transp(d, 16, 4);
+	transp(d, 8, 2);
+	transp(d, 4, 1);
+	transp(d, 2, 4);
+	transp(d, 1, 2);
 }
 
 
@@ -132,10 +132,10 @@ static inline unsigned long comp(unsigned long a, unsigned long b,
 
 static inline void store_planar(char *dst, u32 dst_inc, u32 bpp, u32 d[8])
 {
-    int i;
+	int i;
 
-    for (i = 0; i < bpp; i++, dst += dst_inc)
-	*(u32 *)dst = d[perm_c2p_8bpp[i]];
+	for (i = 0; i < bpp; i++, dst += dst_inc)
+		*(u32 *)dst = d[perm_c2p_8bpp[i]];
 }
 
 
@@ -146,10 +146,10 @@ static inline void store_planar(char *dst, u32 dst_inc, u32 bpp, u32 d[8])
 static inline void store_planar_masked(char *dst, u32 dst_inc, u32 bpp,
 				       u32 d[8], u32 mask)
 {
-    int i;
+	int i;
 
-    for (i = 0; i < bpp; i++, dst += dst_inc)
-	*(u32 *)dst = comp(d[perm_c2p_8bpp[i]], *(u32 *)dst, mask);
+	for (i = 0; i < bpp; i++, dst += dst_inc)
+		*(u32 *)dst = comp(d[perm_c2p_8bpp[i]], *(u32 *)dst, mask);
 }
 
 
@@ -169,63 +169,65 @@ static inline void store_planar_masked(char *dst, u32 dst_inc, u32 bpp,
 void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height,
 	 u32 dst_nextline, u32 dst_nextplane, u32 src_nextline, u32 bpp)
 {
-    int dst_idx;
-    u32 d[8], first, last, w;
-    const u8 *c;
-    u8 *p;
-
-    dst += dy*dst_nextline+(dx & ~31);
-    dst_idx = dx % 32;
-    first = ~0UL >> dst_idx;
-    last = ~(~0UL >> ((dst_idx+width) % 32));
-    while (height--) {
-	c = src;
-	p = dst;
-	w = width;
-	if (dst_idx+width <= 32) {
-	    /* Single destination word */
-	    first &= last;
-	    memset(d, 0, sizeof(d));
-	    memcpy((u8 *)d+dst_idx, c, width);
-	    c += width;
-	    c2p_8bpp(d);
-	    store_planar_masked(p, dst_nextplane, bpp, d, first);
-	    p += 4;
-	} else {
-	    /* Multiple destination words */
-	    w = width;
-	    /* Leading bits */
-	    if (dst_idx) {
-		w = 32 - dst_idx;
-		memset(d, 0, dst_idx);
-		memcpy((u8 *)d+dst_idx, c, w);
-		c += w;
-		c2p_8bpp(d);
-		store_planar_masked(p, dst_nextplane, bpp, d, first);
-		p += 4;
-		w = width-w;
-	    }
-	    /* Main chunk */
-	    while (w >= 32) {
-		memcpy(d, c, 32);
-		c += 32;
-		c2p_8bpp(d);
-		store_planar(p, dst_nextplane, bpp, d);
-		p += 4;
-		w -= 32;
-	    }
-	    /* Trailing bits */
-	    w %= 32;
-	    if (w > 0) {
-		memcpy(d, c, w);
-		memset((u8 *)d+w, 0, 32-w);
-		c2p_8bpp(d);
-		store_planar_masked(p, dst_nextplane, bpp, d, last);
-	    }
+	int dst_idx;
+	u32 d[8], first, last, w;
+	const u8 *c;
+	u8 *p;
+
+	dst += dy*dst_nextline+(dx & ~31);
+	dst_idx = dx % 32;
+	first = ~0UL >> dst_idx;
+	last = ~(~0UL >> ((dst_idx+width) % 32));
+	while (height--) {
+		c = src;
+		p = dst;
+		w = width;
+		if (dst_idx+width <= 32) {
+			/* Single destination word */
+			first &= last;
+			memset(d, 0, sizeof(d));
+			memcpy((u8 *)d+dst_idx, c, width);
+			c += width;
+			c2p_8bpp(d);
+			store_planar_masked(p, dst_nextplane, bpp, d, first);
+			p += 4;
+		} else {
+			/* Multiple destination words */
+			w = width;
+			/* Leading bits */
+			if (dst_idx) {
+				w = 32 - dst_idx;
+				memset(d, 0, dst_idx);
+				memcpy((u8 *)d+dst_idx, c, w);
+				c += w;
+				c2p_8bpp(d);
+				store_planar_masked(p, dst_nextplane, bpp, d,
+						    first);
+				p += 4;
+				w = width-w;
+			}
+			/* Main chunk */
+			while (w >= 32) {
+				memcpy(d, c, 32);
+				c += 32;
+				c2p_8bpp(d);
+				store_planar(p, dst_nextplane, bpp, d);
+				p += 4;
+				w -= 32;
+			}
+			/* Trailing bits */
+			w %= 32;
+			if (w > 0) {
+				memcpy(d, c, w);
+				memset((u8 *)d+w, 0, 32-w);
+				c2p_8bpp(d);
+				store_planar_masked(p, dst_nextplane, bpp, d,
+						    last);
+			}
+		}
+		src += src_nextline;
+		dst += dst_nextline;
 	}
-	src += src_nextline;
-	dst += dst_nextline;
-    }
 }
 EXPORT_SYMBOL_GPL(c2p);
 
-- 
GitLab


From 1f034456c140a8677d0ff3a9bdb3c4b620aae2cb Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sun, 4 Jan 2009 11:43:00 +0100
Subject: [PATCH 205/492] fbdev: c2p - Cleanups

  - Improve comments and naming
  - Convert macros to static inline functions
  - Remove superfluous `break' after `return'
  - Make sure we get a build-time error (undefined reference to
    'c2p_unsupported') in case of future misuse
  - Replace `unsigned long' by `u32' in comp(), as that's what all callers use
  - Use {get,put}_unaligned_be32() in store_planar{,_masked}()
  - Use void * for arbitrary pointers
  - Use a union to represent pixels/words, to avoid casts

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/video/c2p.c | 181 +++++++++++++++++++++++---------------------
 drivers/video/c2p.h |   6 +-
 2 files changed, 99 insertions(+), 88 deletions(-)

diff --git a/drivers/video/c2p.c b/drivers/video/c2p.c
index f102b578ce1..c170fff0d35 100644
--- a/drivers/video/c2p.c
+++ b/drivers/video/c2p.c
@@ -1,7 +1,7 @@
 /*
  *  Fast C2P (Chunky-to-Planar) Conversion
  *
- *  Copyright (C) 2003 Geert Uytterhoeven
+ *  Copyright (C) 2003-2008 Geert Uytterhoeven
  *
  *  NOTES:
  *    - This code was inspired by Scout's C2P tutorial
@@ -14,6 +14,9 @@
 
 #include <linux/module.h>
 #include <linux/string.h>
+
+#include <asm/unaligned.h>
+
 #include "c2p.h"
 
 
@@ -21,97 +24,100 @@
      *  Basic transpose step
      */
 
-#define _transp(d, i1, i2, shift, mask)				\
-	do {							\
-		u32 t = (d[i1] ^ (d[i2] >> shift)) & mask;	\
-		d[i1] ^= t;					\
-		d[i2] ^= t << shift;				\
-	} while (0)
+static inline void _transp(u32 d[], unsigned int i1, unsigned int i2,
+			   unsigned int shift, u32 mask)
+{
+	u32 t = (d[i1] ^ (d[i2] >> shift)) & mask;
+
+	d[i1] ^= t;
+	d[i2] ^= t << shift;
+}
 
-static inline u32 get_mask(int n)
+extern void c2p_unsupported(void);
+
+static inline u32 get_mask(unsigned int n)
 {
 	switch (n) {
 	case 1:
 		return 0x55555555;
-		break;
 
 	case 2:
 		return 0x33333333;
-		break;
 
 	case 4:
 		return 0x0f0f0f0f;
-		break;
 
 	case 8:
 		return 0x00ff00ff;
-		break;
 
 	case 16:
 		return 0x0000ffff;
-		break;
 	}
+
+	c2p_unsupported();
 	return 0;
 }
 
-#define transp_nx1(d, n)					\
-	do {							\
-		u32 mask = get_mask(n);				\
-		/* First block */				\
-		_transp(d, 0, 1, n, mask);			\
-		/* Second block */				\
-		_transp(d, 2, 3, n, mask);			\
-		/* Third block */				\
-		_transp(d, 4, 5, n, mask);			\
-		/* Fourth block */				\
-		_transp(d, 6, 7, n, mask);			\
-	} while (0)
-
-#define transp_nx2(d, n)					\
-	do {							\
-		u32 mask = get_mask(n);				\
-		/* First block */				\
-		_transp(d, 0, 2, n, mask);			\
-		_transp(d, 1, 3, n, mask);			\
-		/* Second block */				\
-		_transp(d, 4, 6, n, mask);			\
-		_transp(d, 5, 7, n, mask);			\
-	} while (0)
-
-#define transp_nx4(d, n)					\
-	do {							\
-		u32 mask = get_mask(n);				\
-		_transp(d, 0, 4, n, mask);			\
-		_transp(d, 1, 5, n, mask);			\
-		_transp(d, 2, 6, n, mask);			\
-		_transp(d, 3, 7, n, mask);			\
-	} while (0)
-
-#define transp(d, n, m)	transp_nx ## m(d, n)
+static inline void transp8(u32 d[], unsigned int n, unsigned int m)
+{
+	u32 mask = get_mask(n);
+
+	switch (m) {
+	case 1:
+		/* First n x 1 block */
+		_transp(d, 0, 1, n, mask);
+		/* Second n x 1 block */
+		_transp(d, 2, 3, n, mask);
+		/* Third n x 1 block */
+		_transp(d, 4, 5, n, mask);
+		/* Fourth n x 1 block */
+		_transp(d, 6, 7, n, mask);
+		return;
+
+	case 2:
+		/* First n x 2 block */
+		_transp(d, 0, 2, n, mask);
+		_transp(d, 1, 3, n, mask);
+		/* Second n x 2 block */
+		_transp(d, 4, 6, n, mask);
+		_transp(d, 5, 7, n, mask);
+		return;
+
+	case 4:
+		/* Single n x 4 block */
+		_transp(d, 0, 4, n, mask);
+		_transp(d, 1, 5, n, mask);
+		_transp(d, 2, 6, n, mask);
+		_transp(d, 3, 7, n, mask);
+		return;
+	}
+
+	c2p_unsupported();
+}
 
 
     /*
      *  Perform a full C2P step on 32 8-bit pixels, stored in 8 32-bit words
      *  containing
      *    - 32 8-bit chunky pixels on input
-     *    - permuted planar data on output
+     *    - permutated planar data (1 plane per 32-bit word) on output
      */
 
-static void c2p_8bpp(u32 d[8])
+static void c2p_32x8(u32 d[8])
 {
-	transp(d, 16, 4);
-	transp(d, 8, 2);
-	transp(d, 4, 1);
-	transp(d, 2, 4);
-	transp(d, 1, 2);
+	transp8(d, 16, 4);
+	transp8(d, 8, 2);
+	transp8(d, 4, 1);
+	transp8(d, 2, 4);
+	transp8(d, 1, 2);
 }
 
 
     /*
-     *  Array containing the permution indices of the planar data after c2p
+     *  Array containing the permutation indices of the planar data after c2p
      */
 
-static const int perm_c2p_8bpp[8] = { 7, 5, 3, 1, 6, 4, 2, 0 };
+static const int perm_c2p_32x8[8] = { 7, 5, 3, 1, 6, 4, 2, 0 };
 
 
     /*
@@ -119,8 +125,7 @@ static const int perm_c2p_8bpp[8] = { 7, 5, 3, 1, 6, 4, 2, 0 };
      *  This is equivalent to (a & mask) | (b & ~mask)
      */
 
-static inline unsigned long comp(unsigned long a, unsigned long b,
-				 unsigned long mask)
+static inline u32 comp(u32 a, u32 b, u32 mask)
 {
 	return ((a ^ b) & mask) ^ b;
 }
@@ -130,12 +135,12 @@ static inline unsigned long comp(unsigned long a, unsigned long b,
      *  Store a full block of planar data after c2p conversion
      */
 
-static inline void store_planar(char *dst, u32 dst_inc, u32 bpp, u32 d[8])
+static inline void store_planar(void *dst, u32 dst_inc, u32 bpp, u32 d[8])
 {
 	int i;
 
 	for (i = 0; i < bpp; i++, dst += dst_inc)
-		*(u32 *)dst = d[perm_c2p_8bpp[i]];
+		put_unaligned_be32(d[perm_c2p_32x8[i]], dst);
 }
 
 
@@ -143,13 +148,15 @@ static inline void store_planar(char *dst, u32 dst_inc, u32 bpp, u32 d[8])
      *  Store a partial block of planar data after c2p conversion
      */
 
-static inline void store_planar_masked(char *dst, u32 dst_inc, u32 bpp,
+static inline void store_planar_masked(void *dst, u32 dst_inc, u32 bpp,
 				       u32 d[8], u32 mask)
 {
 	int i;
 
 	for (i = 0; i < bpp; i++, dst += dst_inc)
-		*(u32 *)dst = comp(d[perm_c2p_8bpp[i]], *(u32 *)dst, mask);
+		put_unaligned_be32(comp(d[perm_c2p_32x8[i]],
+					get_unaligned_be32(dst), mask),
+				   dst);
 }
 
 
@@ -166,18 +173,21 @@ static inline void store_planar_masked(char *dst, u32 dst_inc, u32 bpp,
      *  @bpp: Bits per pixel of the planar frame buffer (1-8)
      */
 
-void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height,
+void c2p(void *dst, const void *src, u32 dx, u32 dy, u32 width, u32 height,
 	 u32 dst_nextline, u32 dst_nextplane, u32 src_nextline, u32 bpp)
 {
-	int dst_idx;
-	u32 d[8], first, last, w;
+	union {
+		u8 pixels[32];
+		u32 words[8];
+	} d;
+	u32 dst_idx, first, last, w;
 	const u8 *c;
-	u8 *p;
+	void *p;
 
 	dst += dy*dst_nextline+(dx & ~31);
 	dst_idx = dx % 32;
-	first = ~0UL >> dst_idx;
-	last = ~(~0UL >> ((dst_idx+width) % 32));
+	first = 0xffffffffU >> dst_idx;
+	last = ~(0xffffffffU >> ((dst_idx+width) % 32));
 	while (height--) {
 		c = src;
 		p = dst;
@@ -185,11 +195,12 @@ void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height,
 		if (dst_idx+width <= 32) {
 			/* Single destination word */
 			first &= last;
-			memset(d, 0, sizeof(d));
-			memcpy((u8 *)d+dst_idx, c, width);
+			memset(d.pixels, 0, sizeof(d));
+			memcpy(d.pixels+dst_idx, c, width);
 			c += width;
-			c2p_8bpp(d);
-			store_planar_masked(p, dst_nextplane, bpp, d, first);
+			c2p_32x8(d.words);
+			store_planar_masked(p, dst_nextplane, bpp, d.words,
+					    first);
 			p += 4;
 		} else {
 			/* Multiple destination words */
@@ -197,32 +208,32 @@ void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height,
 			/* Leading bits */
 			if (dst_idx) {
 				w = 32 - dst_idx;
-				memset(d, 0, dst_idx);
-				memcpy((u8 *)d+dst_idx, c, w);
+				memset(d.pixels, 0, dst_idx);
+				memcpy(d.pixels+dst_idx, c, w);
 				c += w;
-				c2p_8bpp(d);
-				store_planar_masked(p, dst_nextplane, bpp, d,
-						    first);
+				c2p_32x8(d.words);
+				store_planar_masked(p, dst_nextplane, bpp,
+						    d.words, first);
 				p += 4;
 				w = width-w;
 			}
 			/* Main chunk */
 			while (w >= 32) {
-				memcpy(d, c, 32);
+				memcpy(d.pixels, c, 32);
 				c += 32;
-				c2p_8bpp(d);
-				store_planar(p, dst_nextplane, bpp, d);
+				c2p_32x8(d.words);
+				store_planar(p, dst_nextplane, bpp, d.words);
 				p += 4;
 				w -= 32;
 			}
 			/* Trailing bits */
 			w %= 32;
 			if (w > 0) {
-				memcpy(d, c, w);
-				memset((u8 *)d+w, 0, 32-w);
-				c2p_8bpp(d);
-				store_planar_masked(p, dst_nextplane, bpp, d,
-						    last);
+				memcpy(d.pixels, c, w);
+				memset(d.pixels+w, 0, 32-w);
+				c2p_32x8(d.words);
+				store_planar_masked(p, dst_nextplane, bpp,
+						    d.words, last);
 			}
 		}
 		src += src_nextline;
diff --git a/drivers/video/c2p.h b/drivers/video/c2p.h
index c77cbf17e04..daafd872601 100644
--- a/drivers/video/c2p.h
+++ b/drivers/video/c2p.h
@@ -10,7 +10,7 @@
 
 #include <linux/types.h>
 
-extern void c2p(u8 *dst, const u8 *src, u32 dx, u32 dy, u32 width, u32 height,
-		u32 dst_nextline, u32 dst_nextplane, u32 src_nextline,
-		u32 bpp);
+extern void c2p(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+		u32 height, u32 dst_nextline, u32 dst_nextplane,
+		u32 src_nextline, u32 bpp);
 
-- 
GitLab


From 2cd1de0a0ff1d3da08ff1f1437cf4a44deae6a00 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sun, 4 Jan 2009 11:58:20 +0100
Subject: [PATCH 206/492] fbdev: c2p - Extract common c2p core to c2p_core.h

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/video/c2p.c      |  92 +--------------------------------
 drivers/video/c2p_core.h | 106 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 107 insertions(+), 91 deletions(-)
 create mode 100644 drivers/video/c2p_core.h

diff --git a/drivers/video/c2p.c b/drivers/video/c2p.c
index c170fff0d35..1238c8b912e 100644
--- a/drivers/video/c2p.c
+++ b/drivers/video/c2p.c
@@ -3,10 +3,6 @@
  *
  *  Copyright (C) 2003-2008 Geert Uytterhoeven
  *
- *  NOTES:
- *    - This code was inspired by Scout's C2P tutorial
- *    - It assumes to run on a big endian system
- *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive
  *  for more details.
@@ -18,82 +14,7 @@
 #include <asm/unaligned.h>
 
 #include "c2p.h"
-
-
-    /*
-     *  Basic transpose step
-     */
-
-static inline void _transp(u32 d[], unsigned int i1, unsigned int i2,
-			   unsigned int shift, u32 mask)
-{
-	u32 t = (d[i1] ^ (d[i2] >> shift)) & mask;
-
-	d[i1] ^= t;
-	d[i2] ^= t << shift;
-}
-
-extern void c2p_unsupported(void);
-
-static inline u32 get_mask(unsigned int n)
-{
-	switch (n) {
-	case 1:
-		return 0x55555555;
-
-	case 2:
-		return 0x33333333;
-
-	case 4:
-		return 0x0f0f0f0f;
-
-	case 8:
-		return 0x00ff00ff;
-
-	case 16:
-		return 0x0000ffff;
-	}
-
-	c2p_unsupported();
-	return 0;
-}
-
-static inline void transp8(u32 d[], unsigned int n, unsigned int m)
-{
-	u32 mask = get_mask(n);
-
-	switch (m) {
-	case 1:
-		/* First n x 1 block */
-		_transp(d, 0, 1, n, mask);
-		/* Second n x 1 block */
-		_transp(d, 2, 3, n, mask);
-		/* Third n x 1 block */
-		_transp(d, 4, 5, n, mask);
-		/* Fourth n x 1 block */
-		_transp(d, 6, 7, n, mask);
-		return;
-
-	case 2:
-		/* First n x 2 block */
-		_transp(d, 0, 2, n, mask);
-		_transp(d, 1, 3, n, mask);
-		/* Second n x 2 block */
-		_transp(d, 4, 6, n, mask);
-		_transp(d, 5, 7, n, mask);
-		return;
-
-	case 4:
-		/* Single n x 4 block */
-		_transp(d, 0, 4, n, mask);
-		_transp(d, 1, 5, n, mask);
-		_transp(d, 2, 6, n, mask);
-		_transp(d, 3, 7, n, mask);
-		return;
-	}
-
-	c2p_unsupported();
-}
+#include "c2p_core.h"
 
 
     /*
@@ -120,17 +41,6 @@ static void c2p_32x8(u32 d[8])
 static const int perm_c2p_32x8[8] = { 7, 5, 3, 1, 6, 4, 2, 0 };
 
 
-    /*
-     *  Compose two values, using a bitmask as decision value
-     *  This is equivalent to (a & mask) | (b & ~mask)
-     */
-
-static inline u32 comp(u32 a, u32 b, u32 mask)
-{
-	return ((a ^ b) & mask) ^ b;
-}
-
-
     /*
      *  Store a full block of planar data after c2p conversion
      */
diff --git a/drivers/video/c2p_core.h b/drivers/video/c2p_core.h
new file mode 100644
index 00000000000..3573cf723e4
--- /dev/null
+++ b/drivers/video/c2p_core.h
@@ -0,0 +1,106 @@
+/*
+ *  Fast C2P (Chunky-to-Planar) Conversion
+ *
+ *  Copyright (C) 2003-2008 Geert Uytterhoeven
+ *
+ *  NOTES:
+ *    - This code was inspired by Scout's C2P tutorial
+ *    - It assumes to run on a big endian system
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+
+    /*
+     *  Basic transpose step
+     */
+
+static inline void _transp(u32 d[], unsigned int i1, unsigned int i2,
+			   unsigned int shift, u32 mask)
+{
+	u32 t = (d[i1] ^ (d[i2] >> shift)) & mask;
+
+	d[i1] ^= t;
+	d[i2] ^= t << shift;
+}
+
+
+extern void c2p_unsupported(void);
+
+static inline u32 get_mask(unsigned int n)
+{
+	switch (n) {
+	case 1:
+		return 0x55555555;
+
+	case 2:
+		return 0x33333333;
+
+	case 4:
+		return 0x0f0f0f0f;
+
+	case 8:
+		return 0x00ff00ff;
+
+	case 16:
+		return 0x0000ffff;
+	}
+
+	c2p_unsupported();
+	return 0;
+}
+
+
+    /*
+     *  Transpose operations on 8 32-bit words
+     */
+
+static inline void transp8(u32 d[], unsigned int n, unsigned int m)
+{
+	u32 mask = get_mask(n);
+
+	switch (m) {
+	case 1:
+		/* First n x 1 block */
+		_transp(d, 0, 1, n, mask);
+		/* Second n x 1 block */
+		_transp(d, 2, 3, n, mask);
+		/* Third n x 1 block */
+		_transp(d, 4, 5, n, mask);
+		/* Fourth n x 1 block */
+		_transp(d, 6, 7, n, mask);
+		return;
+
+	case 2:
+		/* First n x 2 block */
+		_transp(d, 0, 2, n, mask);
+		_transp(d, 1, 3, n, mask);
+		/* Second n x 2 block */
+		_transp(d, 4, 6, n, mask);
+		_transp(d, 5, 7, n, mask);
+		return;
+
+	case 4:
+		/* Single n x 4 block */
+		_transp(d, 0, 4, n, mask);
+		_transp(d, 1, 5, n, mask);
+		_transp(d, 2, 6, n, mask);
+		_transp(d, 3, 7, n, mask);
+		return;
+	}
+
+	c2p_unsupported();
+}
+
+
+    /*
+     *  Compose two values, using a bitmask as decision value
+     *  This is equivalent to (a & mask) | (b & ~mask)
+     */
+
+static inline u32 comp(u32 a, u32 b, u32 mask)
+{
+	return ((a ^ b) & mask) ^ b;
+}
-- 
GitLab


From 96f47d6105203ab06c2004e26979dea153bce073 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sun, 21 Dec 2008 15:48:12 +0100
Subject: [PATCH 207/492] fbdev: c2p/atafb - Add support for Atari interleaved
 bitplanes

The c2p() for normal bitplanes is not suitable for interleaved bitplanes with
2 bytes of interleave, causing a garbled penguin logo. Add c2p_iplan2().

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/video/Makefile     |   2 +-
 drivers/video/atafb.c      |  15 +---
 drivers/video/c2p.h        |   5 +-
 drivers/video/c2p_core.h   |  47 ++++++++++++
 drivers/video/c2p_iplan2.c | 153 +++++++++++++++++++++++++++++++++++++
 5 files changed, 208 insertions(+), 14 deletions(-)
 create mode 100644 drivers/video/c2p_iplan2.c

diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index e39e33e797d..4fc29eae515 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -72,7 +72,7 @@ obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
 obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
 obj-$(CONFIG_FB_SGIVW)            += sgivwfb.o
 obj-$(CONFIG_FB_ACORN)            += acornfb.o
-obj-$(CONFIG_FB_ATARI)            += atafb.o c2p.o atafb_mfb.o \
+obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
                                      atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
 obj-$(CONFIG_FB_MAC)              += macfb.o
 obj-$(CONFIG_FB_HECUBA)           += hecubafb.o
diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index f932c138fe1..477ce55bbae 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -122,7 +122,6 @@ static struct atafb_par {
 	void *screen_base;
 	int yres_virtual;
 	u_long next_line;
-	u_long next_plane;
 #if defined ATAFB_TT || defined ATAFB_STE
 	union {
 		struct {
@@ -1392,14 +1391,7 @@ set_screen_base:
 	par->screen_base = screen_base + var->yoffset * linelen;
 	par->hw.falcon.xoffset = 0;
 
-	// FIXME!!! sort of works, no crash
-	//par->next_line = linelen;
-	//par->next_plane = yres_virtual * linelen;
 	par->next_line = linelen;
-	par->next_plane = 2;
-	// crashes
-	//par->next_plane = linelen;
-	//par->next_line  = yres_virtual * linelen;
 
 	return 0;
 }
@@ -2662,10 +2654,9 @@ static void atafb_imageblit(struct fb_info *info, const struct fb_image *image)
 			src += pitch;
 		}
 	} else {
-		// only used for logo; broken
-		c2p(info->screen_base, image->data, dx, dy, width, height,
-		    par->next_line, par->next_plane, image->width,
-		    info->var.bits_per_pixel);
+		c2p_iplan2(info->screen_base, image->data, dx, dy, width,
+			   height, par->next_line, image->width,
+			   info->var.bits_per_pixel);
 	}
 }
 
diff --git a/drivers/video/c2p.h b/drivers/video/c2p.h
index daafd872601..53641298b92 100644
--- a/drivers/video/c2p.h
+++ b/drivers/video/c2p.h
@@ -1,7 +1,7 @@
 /*
  *  Fast C2P (Chunky-to-Planar) Conversion
  *
- *  Copyright (C) 2003 Geert Uytterhoeven
+ *  Copyright (C) 2003-2008 Geert Uytterhoeven
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License. See the file COPYING in the main directory of this archive
@@ -14,3 +14,6 @@ extern void c2p(void *dst, const void *src, u32 dx, u32 dy, u32 width,
 		u32 height, u32 dst_nextline, u32 dst_nextplane,
 		u32 src_nextline, u32 bpp);
 
+extern void c2p_iplan2(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+		       u32 height, u32 dst_nextline, u32 src_nextline,
+		       u32 bpp);
diff --git a/drivers/video/c2p_core.h b/drivers/video/c2p_core.h
index 3573cf723e4..e1035a865fb 100644
--- a/drivers/video/c2p_core.h
+++ b/drivers/video/c2p_core.h
@@ -95,6 +95,53 @@ static inline void transp8(u32 d[], unsigned int n, unsigned int m)
 }
 
 
+    /*
+     *  Transpose operations on 4 32-bit words
+     */
+
+static inline void transp4(u32 d[], unsigned int n, unsigned int m)
+{
+	u32 mask = get_mask(n);
+
+	switch (m) {
+	case 1:
+		/* First n x 1 block */
+		_transp(d, 0, 1, n, mask);
+		/* Second n x 1 block */
+		_transp(d, 2, 3, n, mask);
+		return;
+
+	case 2:
+		/* Single n x 2 block */
+		_transp(d, 0, 2, n, mask);
+		_transp(d, 1, 3, n, mask);
+		return;
+	}
+
+	c2p_unsupported();
+}
+
+
+    /*
+     *  Transpose operations on 4 32-bit words (reverse order)
+     */
+
+static inline void transp4x(u32 d[], unsigned int n, unsigned int m)
+{
+	u32 mask = get_mask(n);
+
+	switch (m) {
+	case 2:
+		/* Single n x 2 block */
+		_transp(d, 2, 0, n, mask);
+		_transp(d, 3, 1, n, mask);
+		return;
+	}
+
+	c2p_unsupported();
+}
+
+
     /*
      *  Compose two values, using a bitmask as decision value
      *  This is equivalent to (a & mask) | (b & ~mask)
diff --git a/drivers/video/c2p_iplan2.c b/drivers/video/c2p_iplan2.c
new file mode 100644
index 00000000000..19156dc6158
--- /dev/null
+++ b/drivers/video/c2p_iplan2.c
@@ -0,0 +1,153 @@
+/*
+ *  Fast C2P (Chunky-to-Planar) Conversion
+ *
+ *  Copyright (C) 2003-2008 Geert Uytterhoeven
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/string.h>
+
+#include <asm/unaligned.h>
+
+#include "c2p.h"
+#include "c2p_core.h"
+
+
+    /*
+     *  Perform a full C2P step on 16 8-bit pixels, stored in 4 32-bit words
+     *  containing
+     *    - 16 8-bit chunky pixels on input
+     *    - permutated planar data (2 planes per 32-bit word) on output
+     */
+
+static void c2p_16x8(u32 d[4])
+{
+	transp4(d, 8, 2);
+	transp4(d, 1, 2);
+	transp4x(d, 16, 2);
+	transp4x(d, 2, 2);
+	transp4(d, 4, 1);
+}
+
+
+    /*
+     *  Array containing the permutation indices of the planar data after c2p
+     */
+
+static const int perm_c2p_16x8[4] = { 1, 3, 0, 2 };
+
+
+    /*
+     *  Store a full block of iplan2 data after c2p conversion
+     */
+
+static inline void store_iplan2(void *dst, u32 bpp, u32 d[4])
+{
+	int i;
+
+	for (i = 0; i < bpp/2; i++, dst += 4)
+		put_unaligned_be32(d[perm_c2p_16x8[i]], dst);
+}
+
+
+    /*
+     *  Store a partial block of iplan2 data after c2p conversion
+     */
+
+static inline void store_iplan2_masked(void *dst, u32 bpp, u32 d[4], u32 mask)
+{
+	int i;
+
+	for (i = 0; i < bpp/2; i++, dst += 4)
+		put_unaligned_be32(comp(d[perm_c2p_16x8[i]],
+					get_unaligned_be32(dst), mask),
+				   dst);
+}
+
+
+    /*
+     *  c2p_iplan2 - Copy 8-bit chunky image data to an interleaved planar
+     *  frame buffer with 2 bytes of interleave
+     *  @dst: Starting address of the planar frame buffer
+     *  @dx: Horizontal destination offset (in pixels)
+     *  @dy: Vertical destination offset (in pixels)
+     *  @width: Image width (in pixels)
+     *  @height: Image height (in pixels)
+     *  @dst_nextline: Frame buffer offset to the next line (in bytes)
+     *  @src_nextline: Image offset to the next line (in bytes)
+     *  @bpp: Bits per pixel of the planar frame buffer (2, 4, or 8)
+     */
+
+void c2p_iplan2(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+		u32 height, u32 dst_nextline, u32 src_nextline, u32 bpp)
+{
+	union {
+		u8 pixels[16];
+		u32 words[4];
+	} d;
+	u32 dst_idx, first, last, w;
+	const u8 *c;
+	void *p;
+
+	dst += dy*dst_nextline+(dx & ~15)*bpp;
+	dst_idx = dx % 16;
+	first = 0xffffU >> dst_idx;
+	first |= first << 16;
+	last = 0xffffU ^ (0xffffU >> ((dst_idx+width) % 16));
+	last |= last << 16;
+	while (height--) {
+		c = src;
+		p = dst;
+		w = width;
+		if (dst_idx+width <= 16) {
+			/* Single destination word */
+			first &= last;
+			memset(d.pixels, 0, sizeof(d));
+			memcpy(d.pixels+dst_idx, c, width);
+			c += width;
+			c2p_16x8(d.words);
+			store_iplan2_masked(p, bpp, d.words, first);
+			p += bpp*2;
+		} else {
+			/* Multiple destination words */
+			w = width;
+			/* Leading bits */
+			if (dst_idx) {
+				w = 16 - dst_idx;
+				memset(d.pixels, 0, dst_idx);
+				memcpy(d.pixels+dst_idx, c, w);
+				c += w;
+				c2p_16x8(d.words);
+				store_iplan2_masked(p, bpp, d.words, first);
+				p += bpp*2;
+				w = width-w;
+			}
+			/* Main chunk */
+			while (w >= 16) {
+				memcpy(d.pixels, c, 16);
+				c += 16;
+				c2p_16x8(d.words);
+				store_iplan2(p, bpp, d.words);
+				p += bpp*2;
+				w -= 16;
+			}
+			/* Trailing bits */
+			w %= 16;
+			if (w > 0) {
+				memcpy(d.pixels, c, w);
+				memset(d.pixels+w, 0, 16-w);
+				c2p_16x8(d.words);
+				store_iplan2_masked(p, bpp, d.words, last);
+			}
+		}
+		src += src_nextline;
+		dst += dst_nextline;
+	}
+}
+EXPORT_SYMBOL_GPL(c2p_iplan2);
+
+MODULE_LICENSE("GPL");
-- 
GitLab


From 2eab7ff843d2cb8c9b2ace869774bd85b2316090 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sun, 21 Dec 2008 15:48:13 +0100
Subject: [PATCH 208/492] fbdev: c2p - Rename c2p to c2p_planar

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/video/Makefile                | 2 +-
 drivers/video/amifb.c                 | 6 +++---
 drivers/video/c2p.h                   | 6 +++---
 drivers/video/{c2p.c => c2p_planar.c} | 9 +++++----
 4 files changed, 12 insertions(+), 11 deletions(-)
 rename drivers/video/{c2p.c => c2p_planar.c} (93%)

diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 4fc29eae515..be2b657546e 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -28,7 +28,7 @@ obj-$(CONFIG_FB_DDC)           += fb_ddc.o
 obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
 
 # Hardware specific drivers go first
-obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p.o
+obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o
 obj-$(CONFIG_FB_ARC)              += arcfb.o
 obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
 obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index b8e9a8682f2..100f2366146 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -2159,9 +2159,9 @@ static void amifb_imageblit(struct fb_info *info, const struct fb_image *image)
 			src += pitch;
 		}
 	} else {
-		c2p(info->screen_base, image->data, dx, dy, width, height,
-		    par->next_line, par->next_plane, image->width,
-		    info->var.bits_per_pixel);
+		c2p_planar(info->screen_base, image->data, dx, dy, width,
+			   height, par->next_line, par->next_plane,
+			   image->width, info->var.bits_per_pixel);
 	}
 }
 
diff --git a/drivers/video/c2p.h b/drivers/video/c2p.h
index 53641298b92..6c38d40427d 100644
--- a/drivers/video/c2p.h
+++ b/drivers/video/c2p.h
@@ -10,9 +10,9 @@
 
 #include <linux/types.h>
 
-extern void c2p(void *dst, const void *src, u32 dx, u32 dy, u32 width,
-		u32 height, u32 dst_nextline, u32 dst_nextplane,
-		u32 src_nextline, u32 bpp);
+extern void c2p_planar(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+		       u32 height, u32 dst_nextline, u32 dst_nextplane,
+		       u32 src_nextline, u32 bpp);
 
 extern void c2p_iplan2(void *dst, const void *src, u32 dx, u32 dy, u32 width,
 		       u32 height, u32 dst_nextline, u32 src_nextline,
diff --git a/drivers/video/c2p.c b/drivers/video/c2p_planar.c
similarity index 93%
rename from drivers/video/c2p.c
rename to drivers/video/c2p_planar.c
index 1238c8b912e..ec7ac8526f0 100644
--- a/drivers/video/c2p.c
+++ b/drivers/video/c2p_planar.c
@@ -71,7 +71,7 @@ static inline void store_planar_masked(void *dst, u32 dst_inc, u32 bpp,
 
 
     /*
-     *  c2p - Copy 8-bit chunky image data to a planar frame buffer
+     *  c2p_planar - Copy 8-bit chunky image data to a planar frame buffer
      *  @dst: Starting address of the planar frame buffer
      *  @dx: Horizontal destination offset (in pixels)
      *  @dy: Vertical destination offset (in pixels)
@@ -83,8 +83,9 @@ static inline void store_planar_masked(void *dst, u32 dst_inc, u32 bpp,
      *  @bpp: Bits per pixel of the planar frame buffer (1-8)
      */
 
-void c2p(void *dst, const void *src, u32 dx, u32 dy, u32 width, u32 height,
-	 u32 dst_nextline, u32 dst_nextplane, u32 src_nextline, u32 bpp)
+void c2p_planar(void *dst, const void *src, u32 dx, u32 dy, u32 width,
+		u32 height, u32 dst_nextline, u32 dst_nextplane,
+		u32 src_nextline, u32 bpp)
 {
 	union {
 		u8 pixels[32];
@@ -150,6 +151,6 @@ void c2p(void *dst, const void *src, u32 dx, u32 dy, u32 width, u32 height,
 		dst += dst_nextline;
 	}
 }
-EXPORT_SYMBOL_GPL(c2p);
+EXPORT_SYMBOL_GPL(c2p_planar);
 
 MODULE_LICENSE("GPL");
-- 
GitLab


From 2455e3c60583961c6f3ddb33201a422404564d8f Mon Sep 17 00:00:00 2001
From: Kars de Jong <jongk@linux-m68k.org>
Date: Thu, 20 Nov 2008 14:28:30 +0100
Subject: [PATCH 209/492] m68k: Add vmlinux.lds to .gitignore

arch/m68k/kernel/.gitignore: Added vmlinux.lds to .gitignore file because it
shouldn't be tracked.

Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/kernel/.gitignore | 1 +
 1 file changed, 1 insertion(+)
 create mode 100644 arch/m68k/kernel/.gitignore

diff --git a/arch/m68k/kernel/.gitignore b/arch/m68k/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/m68k/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
-- 
GitLab


From dc8ee69c760317be0bb4eac2bd2fd81eb663627a Mon Sep 17 00:00:00 2001
From: Kars de Jong <jongk@linux-m68k.org>
Date: Fri, 21 Nov 2008 13:18:12 +0100
Subject: [PATCH 210/492] m68k: zorro - Add devlist.h and gen-devlist to
 .gitignore

drivers/zorro/.gitignore: Added devlist.h and gen-devlist to .gitignore file
because they shouldn't be tracked.

Signed-off-by: Kars de Jong <jongk@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/zorro/.gitignore | 2 ++
 1 file changed, 2 insertions(+)
 create mode 100644 drivers/zorro/.gitignore

diff --git a/drivers/zorro/.gitignore b/drivers/zorro/.gitignore
new file mode 100644
index 00000000000..34f980bd8ff
--- /dev/null
+++ b/drivers/zorro/.gitignore
@@ -0,0 +1,2 @@
+devlist.h
+gen-devlist
-- 
GitLab


From 6d0be946e150ac17da7381b27fd40603ca40b58f Mon Sep 17 00:00:00 2001
From: Andreas Bombe <aeb@debian.org>
Date: Wed, 10 Dec 2008 02:02:19 +0100
Subject: [PATCH 211/492] m68k: amiflop - Get rid of sleep_on calls
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Apart from sleep_on() calls that could be easily converted to
wait_event() and completion calls amiflop also used a flag in ms_delay()
and ms_isr() as a custom mutex for ms_delay() without a need for
explicit unlocking.  I converted that to a standard mutex.

The replacement for the unconditional sleep_on() in fd_motor_on() is a
complete_all() together with a INIT_COMPLETION() before the mod_timer()
call.  It appears to me that fd_motor_on() might be called concurrently
and fd_select() does not guarantee mutual exclusivity in the case the
same drive gets selected again.

Signed-off-by: Andreas Bombe <aeb@debian.org>
Acked-by: Jörg Dorchain <joerg@dorchain.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/block/amiflop.c | 40 ++++++++++++++++------------------------
 1 file changed, 16 insertions(+), 24 deletions(-)

diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index 4b1d4ac960f..8df436ff706 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -156,7 +156,7 @@ static volatile int fdc_busy = -1;
 static volatile int fdc_nested;
 static DECLARE_WAIT_QUEUE_HEAD(fdc_wait);
  
-static DECLARE_WAIT_QUEUE_HEAD(motor_wait);
+static DECLARE_COMPLETION(motor_on_completion);
 
 static volatile int selected = -1;	/* currently selected drive */
 
@@ -184,8 +184,7 @@ static unsigned char mfmencode[16]={
 static unsigned char mfmdecode[128];
 
 /* floppy internal millisecond timer stuff */
-static volatile int ms_busy = -1;
-static DECLARE_WAIT_QUEUE_HEAD(ms_wait);
+static DECLARE_COMPLETION(ms_wait_completion);
 #define MS_TICKS ((amiga_eclock+50)/1000)
 
 /*
@@ -211,8 +210,7 @@ static int fd_device[4] = { 0, 0, 0, 0 };
 
 static irqreturn_t ms_isr(int irq, void *dummy)
 {
-	ms_busy = -1;
-	wake_up(&ms_wait);
+	complete(&ms_wait_completion);
 	return IRQ_HANDLED;
 }
 
@@ -220,19 +218,17 @@ static irqreturn_t ms_isr(int irq, void *dummy)
    A more generic routine would do a schedule a la timer.device */
 static void ms_delay(int ms)
 {
-	unsigned long flags;
 	int ticks;
+	static DEFINE_MUTEX(mutex);
+
 	if (ms > 0) {
-		local_irq_save(flags);
-		while (ms_busy == 0)
-			sleep_on(&ms_wait);
-		ms_busy = 0;
-		local_irq_restore(flags);
+		mutex_lock(&mutex);
 		ticks = MS_TICKS*ms-1;
 		ciaa.tblo=ticks%256;
 		ciaa.tbhi=ticks/256;
 		ciaa.crb=0x19; /*count eclock, force load, one-shoot, start */
-		sleep_on(&ms_wait);
+		wait_for_completion(&ms_wait_completion);
+		mutex_unlock(&mutex);
 	}
 }
 
@@ -254,8 +250,7 @@ static void get_fdc(int drive)
 	printk("get_fdc: drive %d  fdc_busy %d  fdc_nested %d\n",drive,fdc_busy,fdc_nested);
 #endif
 	local_irq_save(flags);
-	while (!try_fdc(drive))
-		sleep_on(&fdc_wait);
+	wait_event(fdc_wait, try_fdc(drive));
 	fdc_busy = drive;
 	fdc_nested++;
 	local_irq_restore(flags);
@@ -330,7 +325,7 @@ static void fd_deselect (int drive)
 static void motor_on_callback(unsigned long nr)
 {
 	if (!(ciaa.pra & DSKRDY) || --on_attempts == 0) {
-		wake_up (&motor_wait);
+		complete_all(&motor_on_completion);
 	} else {
 		motor_on_timer.expires = jiffies + HZ/10;
 		add_timer(&motor_on_timer);
@@ -347,11 +342,12 @@ static int fd_motor_on(int nr)
 		unit[nr].motor = 1;
 		fd_select(nr);
 
+		INIT_COMPLETION(motor_on_completion);
 		motor_on_timer.data = nr;
 		mod_timer(&motor_on_timer, jiffies + HZ/2);
 
 		on_attempts = 10;
-		sleep_on (&motor_wait);
+		wait_for_completion(&motor_on_completion);
 		fd_deselect(nr);
 	}
 
@@ -582,8 +578,7 @@ static void raw_read(int drive)
 {
 	drive&=3;
 	get_fdc(drive);
-	while (block_flag)
-		sleep_on(&wait_fd_block);
+	wait_event(wait_fd_block, !block_flag);
 	fd_select(drive);
 	/* setup adkcon bits correctly */
 	custom.adkcon = ADK_MSBSYNC;
@@ -598,8 +593,7 @@ static void raw_read(int drive)
 
 	block_flag = 1;
 
-	while (block_flag)
-		sleep_on (&wait_fd_block);
+	wait_event(wait_fd_block, !block_flag);
 
 	custom.dsklen = 0;
 	fd_deselect(drive);
@@ -616,8 +610,7 @@ static int raw_write(int drive)
 		rel_fdc();
 		return 0;
 	}
-	while (block_flag)
-		sleep_on(&wait_fd_block);
+	wait_event(wait_fd_block, !block_flag);
 	fd_select(drive);
 	/* clear adkcon bits */
 	custom.adkcon = ADK_PRECOMP1|ADK_PRECOMP0|ADK_WORDSYNC|ADK_MSBSYNC;
@@ -1294,8 +1287,7 @@ static int non_int_flush_track (unsigned long nr)
 			writepending = 0;
 			return 0;
 		}
-		while (block_flag == 2)
-			sleep_on (&wait_fd_block);
+		wait_event(wait_fd_block, block_flag != 2);
 	}
 	else {
 		local_irq_restore(flags);
-- 
GitLab


From c85627fbf5f47045b25bf66f1b4a7001b5b157af Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Sun, 21 Dec 2008 12:03:37 +0100
Subject: [PATCH 212/492] m68k: Kill several external declarations in source
 files

  - Replace external declarations by proper includes where availiable.
    The accesses to some symbols had to be modified, as before they were
    declared using e.g. "extern int _end", while asm-generic/sections.h uses
    e.g. "extern char _end[]"
  - Remove unused or superfluous external declarations

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/apollo/config.c   |  4 ----
 arch/m68k/atari/atakeyb.c   |  1 -
 arch/m68k/bvme6000/config.c |  1 -
 arch/m68k/kernel/setup.c    | 11 +++++------
 arch/m68k/mac/config.c      | 12 ------------
 arch/m68k/mac/debug.c       |  1 -
 arch/m68k/mac/macints.c     | 10 +---------
 arch/m68k/mac/misc.c        |  1 -
 arch/m68k/mac/via.c         |  2 +-
 arch/m68k/math-emu/fp_log.c |  1 -
 arch/m68k/mm/init.c         |  4 +---
 arch/m68k/mm/motorola.c     |  7 +++----
 arch/m68k/mvme147/config.c  |  1 -
 arch/m68k/mvme16x/config.c  |  1 -
 arch/m68k/q40/config.c      |  3 ---
 arch/m68k/sun3/config.c     |  8 +++-----
 arch/m68k/sun3/mmu_emu.c    |  1 -
 arch/m68k/sun3x/config.c    |  1 -
 18 files changed, 14 insertions(+), 56 deletions(-)

diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index 78df98f2029..cf215a082cc 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -31,10 +31,6 @@ extern unsigned long dn_gettimeoffset(void);
 extern int dn_dummy_hwclk(int, struct rtc_time *);
 extern int dn_dummy_set_clock_mmss(unsigned long);
 extern void dn_dummy_reset(void);
-extern void dn_dummy_waitbut(void);
-extern struct fb_info *dn_fb_init(long *);
-extern void dn_dummy_debug_init(void);
-extern irqreturn_t dn_process_int(int irq, struct pt_regs *fp);
 #ifdef CONFIG_HEARTBEAT
 static void dn_heartbeat(int on);
 #endif
diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index c038b7c7eff..f3c343be51e 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -33,7 +33,6 @@
 #include <asm/atari_joystick.h>
 #include <asm/irq.h>
 
-extern unsigned int keymap_count;
 
 /* Hook for MIDI serial driver */
 void (*atari_MIDI_interrupt_hook) (void);
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index c072595928c..9fe6fefb5e1 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -43,7 +43,6 @@ extern unsigned long bvme6000_gettimeoffset (void);
 extern int bvme6000_hwclk (int, struct rtc_time *);
 extern int bvme6000_set_clock_mmss (unsigned long);
 extern void bvme6000_reset (void);
-extern void bvme6000_waitbut(void);
 void bvme6000_set_vectors (void);
 
 /* Save tick handler routine pointer, will point to do_timer() in
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index 4d97bd2bd57..303730afb1c 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -26,6 +26,7 @@
 #include <linux/initrd.h>
 
 #include <asm/bootinfo.h>
+#include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/fpu.h>
 #include <asm/irq.h>
@@ -62,7 +63,6 @@ EXPORT_SYMBOL(vme_brdtype);
 int m68k_is040or060;
 EXPORT_SYMBOL(m68k_is040or060);
 
-extern int end;
 extern unsigned long availmem;
 
 int m68k_num_memory;
@@ -215,11 +215,10 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
 
 void __init setup_arch(char **cmdline_p)
 {
-	extern int _etext, _edata, _end;
 	int i;
 
 	/* The bootinfo is located right after the kernel bss */
-	m68k_parse_bootinfo((const struct bi_record *)&_end);
+	m68k_parse_bootinfo((const struct bi_record *)_end);
 
 	if (CPU_IS_040)
 		m68k_is040or060 = 4;
@@ -252,9 +251,9 @@ void __init setup_arch(char **cmdline_p)
 	}
 
 	init_mm.start_code = PAGE_OFFSET;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) &_end;
+	init_mm.end_code = (unsigned long)_etext;
+	init_mm.end_data = (unsigned long)_edata;
+	init_mm.brk = (unsigned long)_end;
 
 	*cmdline_p = m68k_command_line;
 	memcpy(boot_command_line, *cmdline_p, CL_SIZE);
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index 8819b97be32..98b6bcfb37b 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -47,13 +47,6 @@
 
 struct mac_booter_data mac_bi_data;
 
-/* New m68k bootinfo stuff and videobase */
-
-extern int m68k_num_memory;
-extern struct mem_info m68k_memory[NUM_MEMINFO];
-
-extern struct mem_info m68k_ramdisk;
-
 /* The phys. video addr. - might be bogus on some machines */
 static unsigned long mac_orig_videoaddr;
 
@@ -61,7 +54,6 @@ static unsigned long mac_orig_videoaddr;
 extern unsigned long mac_gettimeoffset(void);
 extern int mac_hwclk(int, struct rtc_time *);
 extern int mac_set_clock_mmss(unsigned long);
-extern int show_mac_interrupts(struct seq_file *, void *);
 extern void iop_preinit(void);
 extern void iop_init(void);
 extern void via_init(void);
@@ -805,10 +797,6 @@ static void __init mac_identify(void)
 		mac_bi_data.boottime, mac_bi_data.gmtbias);
 	printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx \n",
 		mac_bi_data.id, mac_bi_data.cpuid, mac_bi_data.memsize);
-#if 0
-	printk("Ramdisk: addr 0x%lx size 0x%lx\n",
-		m68k_ramdisk.addr, m68k_ramdisk.size);
-#endif
 
 	iop_init();
 	via_init();
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
index 65dd77a742a..bce074ceb76 100644
--- a/arch/m68k/mac/debug.c
+++ b/arch/m68k/mac/debug.c
@@ -27,7 +27,6 @@
 #include <asm/macints.h>
 
 extern unsigned long mac_videobase;
-extern unsigned long mac_videodepth;
 extern unsigned long mac_rowbytes;
 
 extern void mac_serial_print(const char *);
diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
index 82e560c076c..7d0cbf3e1ff 100644
--- a/arch/m68k/mac/macints.c
+++ b/arch/m68k/mac/macints.c
@@ -134,6 +134,7 @@
 #include <asm/errno.h>
 #include <asm/macints.h>
 #include <asm/irq_regs.h>
+#include <asm/mac_oss.h>
 
 #define DEBUG_SPURIOUS
 #define SHUTUP_SONIC
@@ -146,7 +147,6 @@ static int scc_mask;
  * VIA/RBV hooks
  */
 
-extern void via_init(void);
 extern void via_register_interrupts(void);
 extern void via_irq_enable(int);
 extern void via_irq_disable(int);
@@ -157,9 +157,6 @@ extern int  via_irq_pending(int);
  * OSS hooks
  */
 
-extern int oss_present;
-
-extern void oss_init(void);
 extern void oss_register_interrupts(void);
 extern void oss_irq_enable(int);
 extern void oss_irq_disable(int);
@@ -170,9 +167,6 @@ extern int  oss_irq_pending(int);
  * PSC hooks
  */
 
-extern int psc_present;
-
-extern void psc_init(void);
 extern void psc_register_interrupts(void);
 extern void psc_irq_enable(int);
 extern void psc_irq_disable(int);
@@ -191,12 +185,10 @@ extern void iop_register_interrupts(void);
 
 extern int baboon_present;
 
-extern void baboon_init(void);
 extern void baboon_register_interrupts(void);
 extern void baboon_irq_enable(int);
 extern void baboon_irq_disable(int);
 extern void baboon_irq_clear(int);
-extern int  baboon_irq_pending(int);
 
 /*
  * SCC interrupt routines
diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c
index a44c7086ab3..5d818568b34 100644
--- a/arch/m68k/mac/misc.c
+++ b/arch/m68k/mac/misc.c
@@ -35,7 +35,6 @@
 
 #define RTC_OFFSET 2082844800
 
-extern struct mac_booter_data mac_bi_data;
 static void (*rom_reset)(void);
 
 #ifdef CONFIG_ADB_CUDA
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index f01d418e64f..dfffb9c483a 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -34,6 +34,7 @@
 #include <asm/macints.h>
 #include <asm/mac_via.h>
 #include <asm/mac_psc.h>
+#include <asm/mac_oss.h>
 
 volatile __u8 *via1, *via2;
 int rbv_present;
@@ -84,7 +85,6 @@ void via_irq_disable(int irq);
 void via_irq_clear(int irq);
 
 extern irqreturn_t mac_scc_dispatch(int, void *);
-extern int oss_present;
 
 /*
  * Initialize the VIAs
diff --git a/arch/m68k/math-emu/fp_log.c b/arch/m68k/math-emu/fp_log.c
index b1033ae0d6f..367ecee2f98 100644
--- a/arch/m68k/math-emu/fp_log.c
+++ b/arch/m68k/math-emu/fp_log.c
@@ -24,7 +24,6 @@ static const struct fp_ext fp_one =
 
 extern struct fp_ext *fp_fadd(struct fp_ext *dest, const struct fp_ext *src);
 extern struct fp_ext *fp_fdiv(struct fp_ext *dest, const struct fp_ext *src);
-extern struct fp_ext *fp_fmul(struct fp_ext *dest, const struct fp_ext *src);
 
 struct fp_ext *
 fp_fsqrt(struct fp_ext *dest, struct fp_ext *src)
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index 81bb08ceec1..0007b2adf3a 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -28,6 +28,7 @@
 #ifdef CONFIG_ATARI
 #include <asm/atari_stram.h>
 #endif
+#include <asm/sections.h>
 #include <asm/tlb.h>
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
@@ -73,9 +74,6 @@ extern void init_pointer_table(unsigned long ptable);
 
 /* References to section boundaries */
 
-extern char _text[], _etext[];
-extern char __init_begin[], __init_end[];
-
 extern pmd_t *zero_pgtable;
 
 void __init mem_init(void)
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index c5dbb9bdb32..4665fc84b7d 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -30,6 +30,7 @@
 #ifdef CONFIG_ATARI
 #include <asm/atari_stram.h>
 #endif
+#include <asm/sections.h>
 
 #undef DEBUG
 
@@ -301,14 +302,12 @@ void __init paging_init(void)
 	}
 }
 
-extern char __init_begin, __init_end;
-
 void free_initmem(void)
 {
 	unsigned long addr;
 
-	addr = (unsigned long)&__init_begin;
-	for (; addr < (unsigned long)&__init_end; addr += PAGE_SIZE) {
+	addr = (unsigned long)__init_begin;
+	for (; addr < (unsigned long)__init_end; addr += PAGE_SIZE) {
 		virt_to_page(addr)->flags &= ~(1 << PG_reserved);
 		init_page_count(virt_to_page(addr));
 		free_page(addr);
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index 43cdf476ffa..b72f079ec2f 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -42,7 +42,6 @@ extern unsigned long mvme147_gettimeoffset (void);
 extern int mvme147_hwclk (int, struct rtc_time *);
 extern int mvme147_set_clock_mmss (unsigned long);
 extern void mvme147_reset (void);
-extern void mvme147_waitbut(void);
 
 
 static int bcd2int (unsigned char b);
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index 1521826fc3c..11edf61cc2c 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -48,7 +48,6 @@ extern unsigned long mvme16x_gettimeoffset (void);
 extern int mvme16x_hwclk (int, struct rtc_time *);
 extern int mvme16x_set_clock_mmss (unsigned long);
 extern void mvme16x_reset (void);
-extern void mvme16x_waitbut(void);
 
 int bcd2int (unsigned char b);
 
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 7110546e3c0..31ab3f08bbd 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -36,7 +36,6 @@
 #include <asm/machdep.h>
 #include <asm/q40_master.h>
 
-extern irqreturn_t q40_process_int(int level, struct pt_regs *regs);
 extern void q40_init_IRQ(void);
 static void q40_get_model(char *model);
 extern void q40_sched_init(irq_handler_t handler);
@@ -47,8 +46,6 @@ static unsigned int q40_get_ss(void);
 static int q40_set_clock_mmss(unsigned long);
 static int q40_get_rtc_pll(struct rtc_pll_info *pll);
 static int q40_set_rtc_pll(struct rtc_pll_info *pll);
-extern void q40_waitbut(void);
-void q40_set_vectors(void);
 
 extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/);
 
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 8dfaa201342..2ca25bd01a9 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -27,23 +27,21 @@
 #include <asm/sun3mmu.h>
 #include <asm/rtc.h>
 #include <asm/machdep.h>
+#include <asm/idprom.h>
 #include <asm/intersil.h>
 #include <asm/irq.h>
+#include <asm/sections.h>
 #include <asm/segment.h>
 #include <asm/sun3ints.h>
 
-extern char _text, _end;
-
 char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
 
 extern unsigned long sun3_gettimeoffset(void);
 static void sun3_sched_init(irq_handler_t handler);
 extern void sun3_get_model (char* model);
-extern void idprom_init (void);
 extern int sun3_hwclk(int set, struct rtc_time *t);
 
 volatile char* clock_va;
-extern volatile unsigned char* sun3_intreg;
 extern unsigned long availmem;
 unsigned long num_pages;
 
@@ -149,7 +147,7 @@ void __init config_sun3(void)
 	mach_halt	     =  sun3_halt;
 	mach_get_hardware_list = sun3_get_hardware_list;
 
-	memory_start = ((((int)&_end) + 0x2000) & ~0x1fff);
+	memory_start = ((((unsigned long)_end) + 0x2000) & ~0x1fff);
 // PROM seems to want the last couple of physical pages. --m
 	memory_end   = *(romvec->pv_sun3mem) + PAGE_OFFSET - 2*PAGE_SIZE;
 
diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c
index 60f9d4500d7..3cd19390aae 100644
--- a/arch/m68k/sun3/mmu_emu.c
+++ b/arch/m68k/sun3/mmu_emu.c
@@ -27,7 +27,6 @@
 #include <asm/mmu_context.h>
 #include <asm/dvma.h>
 
-extern void prom_reboot (char *) __attribute__ ((__noreturn__));
 
 #undef DEBUG_MMU_EMU
 #define DEBUG_PROM_MAPS
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index 2b1ca2db070..fc599fad4a5 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -23,7 +23,6 @@
 #include "time.h"
 
 volatile char *clock_va;
-extern volatile unsigned char *sun3_intreg;
 
 extern void sun3_get_model(char *model);
 
-- 
GitLab


From 66acd2581259d80935fc5216b4b1268d639d9143 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:00:34 +0100
Subject: [PATCH 213/492] m68k: amiga core - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/amiga/amiints.c | 12 ++++++++----
 arch/m68k/amiga/cia.c     |  4 +++-
 arch/m68k/amiga/config.c  |  3 ++-
 3 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/m68k/amiga/amiints.c b/arch/m68k/amiga/amiints.c
index 907a5533c84..c5b5212cc3f 100644
--- a/arch/m68k/amiga/amiints.c
+++ b/arch/m68k/amiga/amiints.c
@@ -72,10 +72,14 @@ static struct irq_controller amiga_irq_controller = {
 
 void __init amiga_init_IRQ(void)
 {
-	request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL);
-	request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL);
-	request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL);
-	request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL);
+	if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL))
+		pr_err("Couldn't register int%d\n", 1);
+	if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL))
+		pr_err("Couldn't register int%d\n", 3);
+	if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL))
+		pr_err("Couldn't register int%d\n", 4);
+	if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL))
+		pr_err("Couldn't register int%d\n", 5);
 
 	m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS);
 
diff --git a/arch/m68k/amiga/cia.c b/arch/m68k/amiga/cia.c
index 343fab49bd9..ecd0f7ca6f0 100644
--- a/arch/m68k/amiga/cia.c
+++ b/arch/m68k/amiga/cia.c
@@ -176,5 +176,7 @@ void __init cia_init_IRQ(struct ciabase *base)
 	/* override auto int and install CIA handler */
 	m68k_setup_irq_controller(&auto_irq_controller, base->handler_irq, 1);
 	m68k_irq_startup(base->handler_irq);
-	request_irq(base->handler_irq, cia_handler, IRQF_SHARED, base->name, base);
+	if (request_irq(base->handler_irq, cia_handler, IRQF_SHARED,
+			base->name, base))
+		pr_err("Couldn't register %s interrupt\n", base->name);
 }
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index ab9862c3a13..6e562751ad5 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -493,7 +493,8 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
 	 * Please don't change this to use ciaa, as it interferes with the
 	 * SCSI code. We'll have to take a look at this later
 	 */
-	request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL);
+	if (request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL))
+		pr_err("Couldn't register timer interrupt\n");
 	/* start timer */
 	ciab.cra |= 0x11;
 }
-- 
GitLab


From 844306538920b3aaf6806e238f0c0309a1e2bb5f Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:01:07 +0100
Subject: [PATCH 214/492] m68k: apollo core - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/apollo/config.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index cf215a082cc..8d3eafab1ff 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -200,7 +200,8 @@ void dn_sched_init(irq_handler_t timer_routine)
 	printk("*(0x10803) %02x\n",*(volatile unsigned char *)(timer+0x3));
 #endif
 
-	request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine);
+	if (request_irq(IRQ_APOLLO, dn_timer_int, 0, "time", timer_routine))
+		pr_err("Couldn't register timer interrupt\n");
 }
 
 unsigned long dn_gettimeoffset(void) {
-- 
GitLab


From 5b8b4c3d1b0ed4ccac3b1985acd0a973dfa00801 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:01:32 +0100
Subject: [PATCH 215/492] m68k: atari core - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/atari/atakeyb.c | 9 +++++++--
 arch/m68k/atari/stdma.c   | 5 +++--
 arch/m68k/atari/time.c    | 5 +++--
 3 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index f3c343be51e..a5f33c05997 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -566,14 +566,19 @@ static int atari_keyb_done = 0;
 
 int atari_keyb_init(void)
 {
+	int error;
+
 	if (atari_keyb_done)
 		return 0;
 
 	kb_state.state = KEYBOARD;
 	kb_state.len = 0;
 
-	request_irq(IRQ_MFP_ACIA, atari_keyboard_interrupt, IRQ_TYPE_SLOW,
-		    "keyboard/mouse/MIDI", atari_keyboard_interrupt);
+	error = request_irq(IRQ_MFP_ACIA, atari_keyboard_interrupt,
+			    IRQ_TYPE_SLOW, "keyboard/mouse/MIDI",
+			    atari_keyboard_interrupt);
+	if (error)
+		return error;
 
 	atari_turnoff_irq(IRQ_MFP_ACIA);
 	do {
diff --git a/arch/m68k/atari/stdma.c b/arch/m68k/atari/stdma.c
index d1bd029a34a..604329fafbb 100644
--- a/arch/m68k/atari/stdma.c
+++ b/arch/m68k/atari/stdma.c
@@ -179,8 +179,9 @@ EXPORT_SYMBOL(stdma_islocked);
 void __init stdma_init(void)
 {
 	stdma_isr = NULL;
-	request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED,
-	            "ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int);
+	if (request_irq(IRQ_MFP_FDC, stdma_int, IRQ_TYPE_SLOW | IRQF_SHARED,
+			"ST-DMA: floppy/ACSI/IDE/Falcon-SCSI", stdma_int))
+		pr_err("Couldn't register ST-DMA interrupt\n");
 }
 
 
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index 1edde27fa32..d076ff8d1b3 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -31,8 +31,9 @@ atari_sched_init(irq_handler_t timer_routine)
     /* start timer C, div = 1:100 */
     mfp.tim_ct_cd = (mfp.tim_ct_cd & 15) | 0x60;
     /* install interrupt service routine for MFP Timer C */
-    request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
-                "timer", timer_routine);
+    if (request_irq(IRQ_MFP_TIMC, timer_routine, IRQ_TYPE_SLOW,
+		    "timer", timer_routine))
+	pr_err("Couldn't register timer interrupt\n");
 }
 
 /* ++andreas: gettimeoffset fixed to check for pending interrupt */
-- 
GitLab


From 8bd3968bd1653b4499e843bf86a167ead7c86b74 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:02:06 +0100
Subject: [PATCH 216/492] m68k: hp300 core - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/hp300/time.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index dd7c8a2583d..f6312c7d872 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -70,7 +70,8 @@ void __init hp300_sched_init(irq_handler_t vector)
 
   asm volatile(" movpw %0,%1@(5)" : : "d" (INTVAL), "a" (CLOCKBASE));
 
-  request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector);
+  if (request_irq(IRQ_AUTO_6, hp300_tick, IRQ_FLG_STD, "timer tick", vector))
+    pr_err("Couldn't register timer interrupt\n");
 
   out_8(CLOCKBASE + CLKCR2, 0x1);		/* select CR1 */
   out_8(CLOCKBASE + CLKCR1, 0x40);		/* enable irq */
-- 
GitLab


From 92c3dd15cd0589adf66c13c7b6114790c207e5a2 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:02:27 +0100
Subject: [PATCH 217/492] m68k: mac core - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/mac/baboon.c  |  3 ++-
 arch/m68k/mac/iop.c     | 10 ++++++----
 arch/m68k/mac/macints.c |  5 +++--
 arch/m68k/mac/oss.c     | 25 +++++++++++++++----------
 arch/m68k/mac/psc.c     | 12 ++++++++----
 arch/m68k/mac/via.c     | 33 ++++++++++++++++++++-------------
 6 files changed, 54 insertions(+), 34 deletions(-)

diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index 245d16d078a..2a96bebd896 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -92,7 +92,8 @@ static irqreturn_t baboon_irq(int irq, void *dev_id)
 void __init baboon_register_interrupts(void)
 {
 	baboon_disabled = 0;
-	request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon);
+	if (request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon))
+		pr_err("Couldn't register baboon interrupt\n");
 }
 
 /*
diff --git a/arch/m68k/mac/iop.c b/arch/m68k/mac/iop.c
index 326fb997809..1ad4e9d80eb 100644
--- a/arch/m68k/mac/iop.c
+++ b/arch/m68k/mac/iop.c
@@ -305,14 +305,16 @@ void __init iop_register_interrupts(void)
 {
 	if (iop_ism_present) {
 		if (oss_present) {
-			request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq,
+			if (request_irq(OSS_IRQLEV_IOPISM, iop_ism_irq,
 					IRQ_FLG_LOCK, "ISM IOP",
-					(void *) IOP_NUM_ISM);
+					(void *) IOP_NUM_ISM))
+				pr_err("Couldn't register ISM IOP interrupt\n");
 			oss_irq_enable(IRQ_MAC_ADB);
 		} else {
-			request_irq(IRQ_VIA2_0, iop_ism_irq,
+			if (request_irq(IRQ_VIA2_0, iop_ism_irq,
 					IRQ_FLG_LOCK|IRQ_FLG_FAST, "ISM IOP",
-					(void *) IOP_NUM_ISM);
+					(void *) IOP_NUM_ISM))
+				pr_err("Couldn't register ISM IOP interrupt\n");
 		}
 		if (!iop_alive(iop_base[IOP_NUM_ISM])) {
 			printk("IOP: oh my god, they killed the ISM IOP!\n");
diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
index 7d0cbf3e1ff..23711074e0e 100644
--- a/arch/m68k/mac/macints.c
+++ b/arch/m68k/mac/macints.c
@@ -250,8 +250,9 @@ void __init mac_init_IRQ(void)
 	if (baboon_present)
 		baboon_register_interrupts();
 	iop_register_interrupts();
-	request_irq(IRQ_AUTO_7, mac_nmi_handler, 0, "NMI",
-			mac_nmi_handler);
+	if (request_irq(IRQ_AUTO_7, mac_nmi_handler, 0, "NMI",
+			mac_nmi_handler))
+		pr_err("Couldn't register NMI\n");
 #ifdef DEBUG_MACINTS
 	printk("mac_init_IRQ(): Done!\n");
 #endif
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index 8426501119c..f3d23d6ebcf 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -66,16 +66,21 @@ void __init oss_init(void)
 
 void __init oss_register_interrupts(void)
 {
-	request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
-			"scsi", (void *) oss);
-	request_irq(OSS_IRQLEV_IOPSCC, mac_scc_dispatch, IRQ_FLG_LOCK,
-			"scc", mac_scc_dispatch);
-	request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
-			"nubus", (void *) oss);
-	request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK,
-			"sound", (void *) oss);
-	request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK,
-			"via1", (void *) via1);
+	if (request_irq(OSS_IRQLEV_SCSI, oss_irq, IRQ_FLG_LOCK,
+			"scsi", (void *) oss))
+		pr_err("Couldn't register %s interrupt\n", "scsi");
+	if (request_irq(OSS_IRQLEV_IOPSCC, mac_scc_dispatch, IRQ_FLG_LOCK,
+			"scc", mac_scc_dispatch))
+		pr_err("Couldn't register %s interrupt\n", "scc");
+	if (request_irq(OSS_IRQLEV_NUBUS, oss_nubus_irq, IRQ_FLG_LOCK,
+			"nubus", (void *) oss))
+		pr_err("Couldn't register %s interrupt\n", "nubus");
+	if (request_irq(OSS_IRQLEV_SOUND, oss_irq, IRQ_FLG_LOCK,
+			"sound", (void *) oss))
+		pr_err("Couldn't register %s interrupt\n", "sound");
+	if (request_irq(OSS_IRQLEV_VIA1, via1_irq, IRQ_FLG_LOCK,
+			"via1", (void *) via1))
+		pr_err("Couldn't register %s interrupt\n", "via1");
 }
 
 /*
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index f84a4dd64f9..ba6ccab6401 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -117,10 +117,14 @@ void __init psc_init(void)
 
 void __init psc_register_interrupts(void)
 {
-	request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30);
-	request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40);
-	request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50);
-	request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60);
+	if (request_irq(IRQ_AUTO_3, psc_irq, 0, "psc3", (void *) 0x30))
+		pr_err("Couldn't register psc%d interrupt\n", 3);
+	if (request_irq(IRQ_AUTO_4, psc_irq, 0, "psc4", (void *) 0x40))
+		pr_err("Couldn't register psc%d interrupt\n", 4);
+	if (request_irq(IRQ_AUTO_5, psc_irq, 0, "psc5", (void *) 0x50))
+		pr_err("Couldn't register psc%d interrupt\n", 5);
+	if (request_irq(IRQ_AUTO_6, psc_irq, 0, "psc6", (void *) 0x60))
+		pr_err("Couldn't register psc%d interrupt\n", 6);
 }
 
 /*
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index dfffb9c483a..7d97ba54536 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -283,7 +283,8 @@ void __init via_init_clock(irq_handler_t func)
 	via1[vT1CL] = MAC_CLOCK_LOW;
 	via1[vT1CH] = MAC_CLOCK_HIGH;
 
-	request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func);
+	if (request_irq(IRQ_MAC_TIMER_1, func, IRQ_FLG_LOCK, "timer", func))
+		pr_err("Couldn't register %s interrupt\n", "timer");
 }
 
 /*
@@ -293,25 +294,31 @@ void __init via_init_clock(irq_handler_t func)
 void __init via_register_interrupts(void)
 {
 	if (via_alt_mapping) {
-		request_irq(IRQ_AUTO_1, via1_irq,
+		if (request_irq(IRQ_AUTO_1, via1_irq,
 				IRQ_FLG_LOCK|IRQ_FLG_FAST, "software",
-				(void *) via1);
-		request_irq(IRQ_AUTO_6, via1_irq,
+				(void *) via1))
+			pr_err("Couldn't register %s interrupt\n", "software");
+		if (request_irq(IRQ_AUTO_6, via1_irq,
 				IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
-				(void *) via1);
+				(void *) via1))
+			pr_err("Couldn't register %s interrupt\n", "via1");
 	} else {
-		request_irq(IRQ_AUTO_1, via1_irq,
+		if (request_irq(IRQ_AUTO_1, via1_irq,
 				IRQ_FLG_LOCK|IRQ_FLG_FAST, "via1",
-				(void *) via1);
+				(void *) via1))
+			pr_err("Couldn't register %s interrupt\n", "via1");
 	}
-	request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
-			"via2", (void *) via2);
+	if (request_irq(IRQ_AUTO_2, via2_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
+			"via2", (void *) via2))
+		pr_err("Couldn't register %s interrupt\n", "via2");
 	if (!psc_present) {
-		request_irq(IRQ_AUTO_4, mac_scc_dispatch, IRQ_FLG_LOCK,
-				"scc", mac_scc_dispatch);
+		if (request_irq(IRQ_AUTO_4, mac_scc_dispatch, IRQ_FLG_LOCK,
+				"scc", mac_scc_dispatch))
+			pr_err("Couldn't register %s interrupt\n", "scc");
 	}
-	request_irq(IRQ_MAC_NUBUS, via_nubus_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
-			"nubus", (void *) via2);
+	if (request_irq(IRQ_MAC_NUBUS, via_nubus_irq,
+			IRQ_FLG_LOCK|IRQ_FLG_FAST, "nubus", (void *) via2))
+		pr_err("Couldn't register %s interrupt\n", "nubus");
 }
 
 /*
-- 
GitLab


From 41904f8fe160202b8bfcc5da91dd927be40775b3 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:03:28 +0100
Subject: [PATCH 218/492] m68k: mvme147 core - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/mvme147/config.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index b72f079ec2f..100baaa692a 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -114,8 +114,9 @@ static irqreturn_t mvme147_timer_int (int irq, void *dev_id)
 void mvme147_sched_init (irq_handler_t timer_routine)
 {
 	tick_handler = timer_routine;
-	request_irq (PCC_IRQ_TIMER1, mvme147_timer_int,
-		IRQ_FLG_REPLACE, "timer 1", NULL);
+	if (request_irq(PCC_IRQ_TIMER1, mvme147_timer_int, IRQ_FLG_REPLACE,
+			"timer 1", NULL))
+		pr_err("Couldn't register timer interrupt\n");
 
 	/* Init the clock with a value */
 	/* our clock goes off every 6.25us */
-- 
GitLab


From 07e449b5b43b4b82c54e3026fc26bd4d8c81b080 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:05:24 +0100
Subject: [PATCH 219/492] m68k: sun3 core - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/sun3/sun3ints.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index 7364cd67455..ad90393a336 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -105,7 +105,10 @@ void __init sun3_init_IRQ(void)
 	m68k_setup_irq_controller(&sun3_irq_controller, IRQ_AUTO_1, 7);
 	m68k_setup_user_interrupt(VEC_USER, 128, NULL);
 
-	request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL);
-	request_irq(IRQ_AUTO_7, sun3_int7, 0, "int7", NULL);
-	request_irq(IRQ_USER+127, sun3_vec255, 0, "vec255", NULL);
+	if (request_irq(IRQ_AUTO_5, sun3_int5, 0, "int5", NULL))
+		pr_err("Couldn't register %s interrupt\n", "int5");
+	if (request_irq(IRQ_AUTO_7, sun3_int7, 0, "int7", NULL))
+		pr_err("Couldn't register %s interrupt\n", "int7");
+	if (request_irq(IRQ_USER+127, sun3_vec255, 0, "vec255", NULL))
+		pr_err("Couldn't register %s interrupt\n", "vec255");
 }
-- 
GitLab


From c36a4e40389a17bb439e2f38b1ae9632ba8af7ae Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:07:07 +0100
Subject: [PATCH 220/492] m68k: vme_scc - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
---
 drivers/char/vme_scc.c | 166 +++++++++++++++++++++++++++++++++--------
 1 file changed, 136 insertions(+), 30 deletions(-)

diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c
index 0e8234bd0e1..994e1a58b98 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/char/vme_scc.c
@@ -198,6 +198,7 @@ static void scc_init_portstructs(void)
 static int mvme147_scc_init(void)
 {
 	struct scc_port *port;
+	int error;
 
 	printk(KERN_INFO "SCC: MVME147 Serial Driver\n");
 	/* Init channel A */
@@ -207,14 +208,23 @@ static int mvme147_scc_init(void)
 	port->datap = port->ctrlp + 1;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(MVME147_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-A TX", port);
-	request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail;
+	error = request_irq(MVME147_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-A status", port);
-	request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_tx;
+	error = request_irq(MVME147_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-A RX", port);
-	request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_stat;
+	error = request_irq(MVME147_IRQ_SCCA_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_rx;
+
 	{
 		SCC_ACCESS_INIT(port);
 
@@ -234,14 +244,23 @@ static int mvme147_scc_init(void)
 	port->datap = port->ctrlp + 1;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(MVME147_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-B TX", port);
-	request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_spcond;
+	error = request_irq(MVME147_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-B status", port);
-	request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_b_tx;
+	error = request_irq(MVME147_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-B RX", port);
-	request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_stat;
+	error = request_irq(MVME147_IRQ_SCCB_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_rx;
+
 	{
 		SCC_ACCESS_INIT(port);
 
@@ -257,6 +276,23 @@ static int mvme147_scc_init(void)
 	scc_init_drivers();
 
 	return 0;
+
+fail_free_b_rx:
+	free_irq(MVME147_IRQ_SCCB_RX, port);
+fail_free_b_stat:
+	free_irq(MVME147_IRQ_SCCB_STAT, port);
+fail_free_b_tx:
+	free_irq(MVME147_IRQ_SCCB_TX, port);
+fail_free_a_spcond:
+	free_irq(MVME147_IRQ_SCCA_SPCOND, port);
+fail_free_a_rx:
+	free_irq(MVME147_IRQ_SCCA_RX, port);
+fail_free_a_stat:
+	free_irq(MVME147_IRQ_SCCA_STAT, port);
+fail_free_a_tx:
+	free_irq(MVME147_IRQ_SCCA_TX, port);
+fail:
+	return error;
 }
 #endif
 
@@ -265,6 +301,7 @@ static int mvme147_scc_init(void)
 static int mvme162_scc_init(void)
 {
 	struct scc_port *port;
+	int error;
 
 	if (!(mvme16x_config & MVME16x_CONFIG_GOT_SCCA))
 		return (-ENODEV);
@@ -277,14 +314,23 @@ static int mvme162_scc_init(void)
 	port->datap = port->ctrlp + 2;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(MVME162_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-A TX", port);
-	request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail;
+	error = request_irq(MVME162_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-A status", port);
-	request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_tx;
+	error = request_irq(MVME162_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-A RX", port);
-	request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_stat;
+	error = request_irq(MVME162_IRQ_SCCA_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_rx;
+
 	{
 		SCC_ACCESS_INIT(port);
 
@@ -304,14 +350,22 @@ static int mvme162_scc_init(void)
 	port->datap = port->ctrlp + 2;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(MVME162_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-B TX", port);
-	request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_spcond;
+	error = request_irq(MVME162_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-B status", port);
-	request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_b_tx;
+	error = request_irq(MVME162_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-B RX", port);
-	request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_stat;
+	error = request_irq(MVME162_IRQ_SCCB_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_rx;
 
 	{
 		SCC_ACCESS_INIT(port);	/* Either channel will do */
@@ -328,6 +382,23 @@ static int mvme162_scc_init(void)
 	scc_init_drivers();
 
 	return 0;
+
+fail_free_b_rx:
+	free_irq(MVME162_IRQ_SCCB_RX, port);
+fail_free_b_stat:
+	free_irq(MVME162_IRQ_SCCB_STAT, port);
+fail_free_b_tx:
+	free_irq(MVME162_IRQ_SCCB_TX, port);
+fail_free_a_spcond:
+	free_irq(MVME162_IRQ_SCCA_SPCOND, port);
+fail_free_a_rx:
+	free_irq(MVME162_IRQ_SCCA_RX, port);
+fail_free_a_stat:
+	free_irq(MVME162_IRQ_SCCA_STAT, port);
+fail_free_a_tx:
+	free_irq(MVME162_IRQ_SCCA_TX, port);
+fail:
+	return error;
 }
 #endif
 
@@ -336,6 +407,7 @@ static int mvme162_scc_init(void)
 static int bvme6000_scc_init(void)
 {
 	struct scc_port *port;
+	int error;
 
 	printk(KERN_INFO "SCC: BVME6000 Serial Driver\n");
 	/* Init channel A */
@@ -345,14 +417,23 @@ static int bvme6000_scc_init(void)
 	port->datap = port->ctrlp + 4;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(BVME_IRQ_SCCA_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-A TX", port);
-	request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail;
+	error = request_irq(BVME_IRQ_SCCA_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-A status", port);
-	request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_tx;
+	error = request_irq(BVME_IRQ_SCCA_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-A RX", port);
-	request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_stat;
+	error = request_irq(BVME_IRQ_SCCA_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-A special cond", port);
+	if (error)
+		goto fail_free_a_rx;
+
 	{
 		SCC_ACCESS_INIT(port);
 
@@ -372,14 +453,22 @@ static int bvme6000_scc_init(void)
 	port->datap = port->ctrlp + 4;
 	port->port_a = &scc_ports[0];
 	port->port_b = &scc_ports[1];
-	request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
+	error = request_irq(BVME_IRQ_SCCB_TX, scc_tx_int, IRQF_DISABLED,
 		            "SCC-B TX", port);
-	request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_a_spcond;
+	error = request_irq(BVME_IRQ_SCCB_STAT, scc_stat_int, IRQF_DISABLED,
 		            "SCC-B status", port);
-	request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
+	if (error)
+		goto fail_free_b_tx;
+	error = request_irq(BVME_IRQ_SCCB_RX, scc_rx_int, IRQF_DISABLED,
 		            "SCC-B RX", port);
-	request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int, IRQF_DISABLED,
-		            "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_stat;
+	error = request_irq(BVME_IRQ_SCCB_SPCOND, scc_spcond_int,
+			    IRQF_DISABLED, "SCC-B special cond", port);
+	if (error)
+		goto fail_free_b_rx;
 
 	{
 		SCC_ACCESS_INIT(port);	/* Either channel will do */
@@ -393,6 +482,23 @@ static int bvme6000_scc_init(void)
 	scc_init_drivers();
 
 	return 0;
+
+fail:
+	free_irq(BVME_IRQ_SCCA_STAT, port);
+fail_free_a_tx:
+	free_irq(BVME_IRQ_SCCA_RX, port);
+fail_free_a_stat:
+	free_irq(BVME_IRQ_SCCA_SPCOND, port);
+fail_free_a_rx:
+	free_irq(BVME_IRQ_SCCB_TX, port);
+fail_free_a_spcond:
+	free_irq(BVME_IRQ_SCCB_STAT, port);
+fail_free_b_tx:
+	free_irq(BVME_IRQ_SCCB_RX, port);
+fail_free_b_stat:
+	free_irq(BVME_IRQ_SCCB_SPCOND, port);
+fail_free_b_rx:
+	return error;
 }
 #endif
 
-- 
GitLab


From 67c53c34660c535083c4c8753e547a9338802ec6 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:08:21 +0100
Subject: [PATCH 221/492] m68k: ser_a2232 - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
---
 drivers/char/ser_a2232.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c
index 33872a219df..33a2b531802 100644
--- a/drivers/char/ser_a2232.c
+++ b/drivers/char/ser_a2232.c
@@ -718,6 +718,7 @@ static int __init a2232board_init(void)
 	u_char *from;
 	volatile u_char *to;
 	volatile struct a2232memory *mem;
+	int error, i;
 
 #ifdef CONFIG_SMP
 	return -ENODEV;	/* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */
@@ -797,8 +798,15 @@ static int __init a2232board_init(void)
 	*/
 	if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx?
 
-	request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, "A2232 serial VBL", a2232_driver_ID);
-	return 0;
+	error = request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0,
+			    "A2232 serial VBL", a2232_driver_ID);
+	if (error) {
+		for (i = 0; i < nr_a2232; i++)
+			zorro_release_device(zd_a2232[i]);
+		tty_unregister_driver(a2232_driver);
+		put_tty_driver(a2232_driver);
+	}
+	return error;
 }
 
 static void __exit a2232board_exit(void)
-- 
GitLab


From 5edc304f49f3b1a246a3cc4ecc248e8fe7174840 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:13:41 +0100
Subject: [PATCH 222/492] m68k: amiserial - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

and clean up the error path handling.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
---
 drivers/char/amiserial.c | 36 ++++++++++++++++++++++++++++++------
 1 file changed, 30 insertions(+), 6 deletions(-)

diff --git a/drivers/char/amiserial.c b/drivers/char/amiserial.c
index 4e0cfdeab14..a58869ea851 100644
--- a/drivers/char/amiserial.c
+++ b/drivers/char/amiserial.c
@@ -1963,6 +1963,7 @@ static int __init rs_init(void)
 {
 	unsigned long flags;
 	struct serial_state * state;
+	int error;
 
 	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_SERIAL))
 		return -ENODEV;
@@ -1975,8 +1976,11 @@ static int __init rs_init(void)
 	 *  We request SERDAT and SERPER only, because the serial registers are
 	 *  too spreaded over the custom register space
 	 */
-	if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4, "amiserial [Paula]"))
-		return -EBUSY;
+	if (!request_mem_region(CUSTOM_PHYSADDR+0x30, 4,
+				"amiserial [Paula]")) {
+		error = -EBUSY;
+		goto fail_put_tty_driver;
+	}
 
 	IRQ_ports = NULL;
 
@@ -1997,8 +2001,9 @@ static int __init rs_init(void)
 	serial_driver->flags = TTY_DRIVER_REAL_RAW;
 	tty_set_operations(serial_driver, &serial_ops);
 
-	if (tty_register_driver(serial_driver))
-		panic("Couldn't register serial driver\n");
+	error = tty_register_driver(serial_driver);
+	if (error)
+		goto fail_release_mem_region;
 
 	state = rs_table;
 	state->magic = SSTATE_MAGIC;
@@ -2024,8 +2029,14 @@ static int __init rs_init(void)
 	local_irq_save(flags);
 
 	/* set ISRs, and then disable the rx interrupts */
-	request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
-	request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED, "serial RX", state);
+	error = request_irq(IRQ_AMIGA_TBE, ser_tx_int, 0, "serial TX", state);
+	if (error)
+		goto fail_unregister;
+
+	error = request_irq(IRQ_AMIGA_RBF, ser_rx_int, IRQF_DISABLED,
+			    "serial RX", state);
+	if (error)
+		goto fail_free_irq;
 
 	/* turn off Rx and Tx interrupts */
 	custom.intena = IF_RBF | IF_TBE;
@@ -2045,6 +2056,16 @@ static int __init rs_init(void)
 	ciab.ddra &= ~(SER_DCD | SER_CTS | SER_DSR);  /* inputs */
 
 	return 0;
+
+fail_free_irq:
+	free_irq(IRQ_AMIGA_TBE, state);
+fail_unregister:
+	tty_unregister_driver(serial_driver);
+fail_release_mem_region:
+	release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
+fail_put_tty_driver:
+	put_tty_driver(serial_driver);
+	return error;
 }
 
 static __exit void rs_exit(void) 
@@ -2064,6 +2085,9 @@ static __exit void rs_exit(void)
 	  kfree(info);
 	}
 
+	free_irq(IRQ_AMIGA_TBE, rs_table);
+	free_irq(IRQ_AMIGA_RBF, rs_table);
+
 	release_mem_region(CUSTOM_PHYSADDR+0x30, 4);
 }
 
-- 
GitLab


From 639274d8106e25c2f91bf92270f46aaa3d104040 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:10:11 +0100
Subject: [PATCH 223/492] m68k: atafb - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/video/atafb.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c
index 477ce55bbae..8058572a742 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/atafb.c
@@ -3075,8 +3075,7 @@ int __init atafb_setup(char *options)
 
 int __init atafb_init(void)
 {
-	int pad;
-	int detected_mode;
+	int pad, detected_mode, error;
 	unsigned int defmode = 0;
 	unsigned long mem_req;
 
@@ -3116,8 +3115,12 @@ int __init atafb_init(void)
 			printk("atafb_init: initializing Falcon hw\n");
 			fbhw = &falcon_switch;
 			atafb_ops.fb_setcolreg = &falcon_setcolreg;
-			request_irq(IRQ_AUTO_4, falcon_vbl_switcher, IRQ_TYPE_PRIO,
-			            "framebuffer/modeswitch", falcon_vbl_switcher);
+			error = request_irq(IRQ_AUTO_4, falcon_vbl_switcher,
+					    IRQ_TYPE_PRIO,
+					    "framebuffer/modeswitch",
+					    falcon_vbl_switcher);
+			if (error)
+				return error;
 			defmode = DEFMODE_F30;
 			break;
 		}
-- 
GitLab


From 2e4c77bea3d8b17d94f8ee382411f359b708560f Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:16:41 +0100
Subject: [PATCH 224/492] m68k: dio - Kill warn_unused_result warnings

warning: ignoring return value of 'device_register', declared with attribute
warn_unused_result
warning: ignoring return value of 'device_create_file', declared with
attribute warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/dio/dio-sysfs.c | 16 ++++++++++------
 drivers/dio/dio.c       | 18 +++++++++++++++---
 include/linux/dio.h     |  2 +-
 3 files changed, 26 insertions(+), 10 deletions(-)

diff --git a/drivers/dio/dio-sysfs.c b/drivers/dio/dio-sysfs.c
index f4646303884..91d5f4da876 100644
--- a/drivers/dio/dio-sysfs.c
+++ b/drivers/dio/dio-sysfs.c
@@ -63,15 +63,19 @@ static ssize_t dio_show_resource(struct device *dev, struct device_attribute *at
 }
 static DEVICE_ATTR(resource, S_IRUGO, dio_show_resource, NULL);
 
-void dio_create_sysfs_dev_files(struct dio_dev *d)
+int dio_create_sysfs_dev_files(struct dio_dev *d)
 {
 	struct device *dev = &d->dev;
+	int error;
 
 	/* current configuration's attributes */
-	device_create_file(dev, &dev_attr_id);
-	device_create_file(dev, &dev_attr_ipl);
-	device_create_file(dev, &dev_attr_secid);
-	device_create_file(dev, &dev_attr_name);
-	device_create_file(dev, &dev_attr_resource);
+	if ((error = device_create_file(dev, &dev_attr_id)) ||
+	    (error = device_create_file(dev, &dev_attr_ipl)) ||
+	    (error = device_create_file(dev, &dev_attr_secid)) ||
+	    (error = device_create_file(dev, &dev_attr_name)) ||
+	    (error = device_create_file(dev, &dev_attr_resource)))
+		return error;
+
+	return 0;
 }
 
diff --git a/drivers/dio/dio.c b/drivers/dio/dio.c
index 07f274f853d..10c3c498358 100644
--- a/drivers/dio/dio.c
+++ b/drivers/dio/dio.c
@@ -173,6 +173,7 @@ static int __init dio_init(void)
 	mm_segment_t fs;
 	int i;
 	struct dio_dev *dev;
+	int error;
 
 	if (!MACH_IS_HP300)
 		return 0;
@@ -182,7 +183,11 @@ static int __init dio_init(void)
 	/* Initialize the DIO bus */ 
 	INIT_LIST_HEAD(&dio_bus.devices);
 	strcpy(dio_bus.dev.bus_id, "dio");
-	device_register(&dio_bus.dev);
+	error = device_register(&dio_bus.dev);
+	if (error) {
+		pr_err("DIO: Error registering dio_bus\n");
+		return error;
+	}
 
 	/* Request all resources */
 	dio_bus.num_resources = (hp300_model == HP_320 ? 1 : 2);
@@ -252,8 +257,15 @@ static int __init dio_init(void)
 
 		if (scode >= DIOII_SCBASE)
 			iounmap(va);
-		device_register(&dev->dev);
-		dio_create_sysfs_dev_files(dev);
+		error = device_register(&dev->dev);
+		if (error) {
+			pr_err("DIO: Error registering device %s\n",
+			       dev->name);
+			continue;
+		}
+		error = dio_create_sysfs_dev_files(dev);
+		if (error)
+			dev_err(&dev->dev, "Error creating sysfs files\n");
         }
 	return 0;
 }
diff --git a/include/linux/dio.h b/include/linux/dio.h
index 1e65ebc2a3d..b2dd31ca171 100644
--- a/include/linux/dio.h
+++ b/include/linux/dio.h
@@ -241,7 +241,7 @@ struct dio_driver {
 
 extern int dio_find(int deviceid);
 extern unsigned long dio_scodetophysaddr(int scode);
-extern void dio_create_sysfs_dev_files(struct dio_dev *);
+extern int dio_create_sysfs_dev_files(struct dio_dev *);
 
 /* New-style probing */
 extern int dio_register_driver(struct dio_driver *);
-- 
GitLab


From 11a8b2c5cde1377c716087df0866d7dc5a6d5d10 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:21:19 +0100
Subject: [PATCH 225/492] m68k: zorro - Kill warn_unused_result warnings

warning: ignoring return value of 'device_register', declared with attribute
warn_unused_result
warning: ignoring return value of 'device_create_file', declared with
attribute warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/zorro/zorro-sysfs.c | 20 ++++++++++++--------
 drivers/zorro/zorro.c       | 17 ++++++++++++++---
 drivers/zorro/zorro.h       |  2 +-
 3 files changed, 27 insertions(+), 12 deletions(-)

diff --git a/drivers/zorro/zorro-sysfs.c b/drivers/zorro/zorro-sysfs.c
index 5290552d2ef..1d2a772ea14 100644
--- a/drivers/zorro/zorro-sysfs.c
+++ b/drivers/zorro/zorro-sysfs.c
@@ -77,17 +77,21 @@ static struct bin_attribute zorro_config_attr = {
 	.read = zorro_read_config,
 };
 
-void zorro_create_sysfs_dev_files(struct zorro_dev *z)
+int zorro_create_sysfs_dev_files(struct zorro_dev *z)
 {
 	struct device *dev = &z->dev;
+	int error;
 
 	/* current configuration's attributes */
-	device_create_file(dev, &dev_attr_id);
-	device_create_file(dev, &dev_attr_type);
-	device_create_file(dev, &dev_attr_serial);
-	device_create_file(dev, &dev_attr_slotaddr);
-	device_create_file(dev, &dev_attr_slotsize);
-	device_create_file(dev, &dev_attr_resource);
-	sysfs_create_bin_file(&dev->kobj, &zorro_config_attr);
+	if ((error = device_create_file(dev, &dev_attr_id)) ||
+	    (error = device_create_file(dev, &dev_attr_type)) ||
+	    (error = device_create_file(dev, &dev_attr_serial)) ||
+	    (error = device_create_file(dev, &dev_attr_slotaddr)) ||
+	    (error = device_create_file(dev, &dev_attr_slotsize)) ||
+	    (error = device_create_file(dev, &dev_attr_resource)) ||
+	    (error = sysfs_create_bin_file(&dev->kobj, &zorro_config_attr)))
+		return error;
+
+	return 0;
 }
 
diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c
index dff16d9767d..2dda20ac6b3 100644
--- a/drivers/zorro/zorro.c
+++ b/drivers/zorro/zorro.c
@@ -130,6 +130,7 @@ static int __init zorro_init(void)
 {
     struct zorro_dev *z;
     unsigned int i;
+    int error;
 
     if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(ZORRO))
 	return 0;
@@ -140,7 +141,11 @@ static int __init zorro_init(void)
     /* Initialize the Zorro bus */
     INIT_LIST_HEAD(&zorro_bus.devices);
     strcpy(zorro_bus.dev.bus_id, "zorro");
-    device_register(&zorro_bus.dev);
+    error = device_register(&zorro_bus.dev);
+    if (error) {
+	pr_err("Zorro: Error registering zorro_bus\n");
+	return error;
+    }
 
     /* Request the resources */
     zorro_bus.num_resources = AMIGAHW_PRESENT(ZORRO3) ? 4 : 2;
@@ -167,8 +172,14 @@ static int __init zorro_init(void)
 	sprintf(z->dev.bus_id, "%02x", i);
 	z->dev.parent = &zorro_bus.dev;
 	z->dev.bus = &zorro_bus_type;
-	device_register(&z->dev);
-	zorro_create_sysfs_dev_files(z);
+	error = device_register(&z->dev);
+	if (error) {
+	    pr_err("Zorro: Error registering device %s\n", z->name);
+	    continue;
+	}
+	error = zorro_create_sysfs_dev_files(z);
+	if (error)
+	    dev_err(&z->dev, "Error creating sysfs files\n");
     }
 
     /* Mark all available Zorro II memory */
diff --git a/drivers/zorro/zorro.h b/drivers/zorro/zorro.h
index 5c91adac4df..b682d5ccd63 100644
--- a/drivers/zorro/zorro.h
+++ b/drivers/zorro/zorro.h
@@ -1,4 +1,4 @@
 
 extern void zorro_name_device(struct zorro_dev *z);
-extern void zorro_create_sysfs_dev_files(struct zorro_dev *z);
+extern int zorro_create_sysfs_dev_files(struct zorro_dev *z);
 
-- 
GitLab


From 89bde7b86e21291ef091dc6ad3e63412f7c6ddd9 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:25:31 +0100
Subject: [PATCH 226/492] m68k: dmasound - Kill warn_unused_result warnings

warning: ignoring return value of 'request_irq', declared with attribute
warn_unused_result

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 sound/oss/dmasound/dmasound_atari.c |  5 +++--
 sound/oss/dmasound/dmasound_q40.c   | 16 ++++++++++------
 2 files changed, 13 insertions(+), 8 deletions(-)

diff --git a/sound/oss/dmasound/dmasound_atari.c b/sound/oss/dmasound/dmasound_atari.c
index 4d45bd63718..57d9f154c88 100644
--- a/sound/oss/dmasound/dmasound_atari.c
+++ b/sound/oss/dmasound/dmasound_atari.c
@@ -851,8 +851,9 @@ static int __init AtaIrqInit(void)
 	mfp.tim_dt_a = 1;	/* Cause interrupt after first event. */
 	mfp.tim_ct_a = 8;	/* Turn on event counting. */
 	/* Register interrupt handler. */
-	request_irq(IRQ_MFP_TIMA, AtaInterrupt, IRQ_TYPE_SLOW, "DMA sound",
-		    AtaInterrupt);
+	if (request_irq(IRQ_MFP_TIMA, AtaInterrupt, IRQ_TYPE_SLOW, "DMA sound",
+			AtaInterrupt))
+		return 0;
 	mfp.int_en_a |= 0x20;	/* Turn interrupt on. */
 	mfp.int_mk_a |= 0x20;
 	return 1;
diff --git a/sound/oss/dmasound/dmasound_q40.c b/sound/oss/dmasound/dmasound_q40.c
index 1855b14d90c..99bcb21c228 100644
--- a/sound/oss/dmasound/dmasound_q40.c
+++ b/sound/oss/dmasound/dmasound_q40.c
@@ -371,8 +371,9 @@ static void Q40Free(void *ptr, unsigned int size)
 static int __init Q40IrqInit(void)
 {
 	/* Register interrupt handler. */
-	request_irq(Q40_IRQ_SAMPLE, Q40StereoInterrupt, 0,
-		    "DMA sound", Q40Interrupt);
+	if (request_irq(Q40_IRQ_SAMPLE, Q40StereoInterrupt, 0,
+		    "DMA sound", Q40Interrupt))
+		return 0;
 
 	return(1);
 }
@@ -401,6 +402,7 @@ static void Q40PlayNextFrame(int index)
 	u_char *start;
 	u_long size;
 	u_char speed;
+	int error;
 
 	/* used by Q40Play() if all doubts whether there really is something
 	 * to be played are already wiped out.
@@ -419,11 +421,13 @@ static void Q40PlayNextFrame(int index)
 	master_outb( 0,SAMPLE_ENABLE_REG);
 	free_irq(Q40_IRQ_SAMPLE, Q40Interrupt);
 	if (dmasound.soft.stereo)
-	  	request_irq(Q40_IRQ_SAMPLE, Q40StereoInterrupt, 0,
-		    "Q40 sound", Q40Interrupt);
+		error = request_irq(Q40_IRQ_SAMPLE, Q40StereoInterrupt, 0,
+				    "Q40 sound", Q40Interrupt);
 	  else
-	        request_irq(Q40_IRQ_SAMPLE, Q40MonoInterrupt, 0,
-		    "Q40 sound", Q40Interrupt);
+		error = request_irq(Q40_IRQ_SAMPLE, Q40MonoInterrupt, 0,
+				    "Q40 sound", Q40Interrupt);
+	if (error && printk_ratelimit())
+		pr_err("Couldn't register sound interrupt\n");
 
 	master_outb( speed, SAMPLE_RATE_REG);
 	master_outb( 1,SAMPLE_CLEAR_REG);
-- 
GitLab


From fae3306ac0c74be0e1ab32e1c77120e792ab2a33 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:22:01 +0100
Subject: [PATCH 227/492] m68k: dio - Kill resource_size_t format warnings

warning: format '%08lx' expects type 'long unsigned int', but argument 3 has
type 'resource_size_t'

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/dio/dio-sysfs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/dio/dio-sysfs.c b/drivers/dio/dio-sysfs.c
index 91d5f4da876..ee1a3b59bd4 100644
--- a/drivers/dio/dio-sysfs.c
+++ b/drivers/dio/dio-sysfs.c
@@ -58,7 +58,8 @@ static ssize_t dio_show_resource(struct device *dev, struct device_attribute *at
 	struct dio_dev *d = to_dio_dev(dev);
 
 	return sprintf(buf, "0x%08lx 0x%08lx 0x%08lx\n",
-		       dio_resource_start(d), dio_resource_end(d),
+		       (unsigned long)dio_resource_start(d),
+		       (unsigned long)dio_resource_end(d),
 		       dio_resource_flags(d));
 }
 static DEVICE_ATTR(resource, S_IRUGO, dio_show_resource, NULL);
-- 
GitLab


From b01e3b07ec29e98464a4f580ae000291cf0d2f87 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:23:35 +0100
Subject: [PATCH 228/492] m68k: zorro - Use %pR to print resources

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/zorro/zorro.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c
index 2dda20ac6b3..a1585d6f648 100644
--- a/drivers/zorro/zorro.c
+++ b/drivers/zorro/zorro.c
@@ -165,10 +165,8 @@ static int __init zorro_init(void)
 	zorro_name_device(z);
 	z->resource.name = z->name;
 	if (request_resource(zorro_find_parent_resource(z), &z->resource))
-	    printk(KERN_ERR "Zorro: Address space collision on device %s "
-		   "[%lx:%lx]\n",
-		   z->name, (unsigned long)zorro_resource_start(z),
-		   (unsigned long)zorro_resource_end(z));
+	    pr_err("Zorro: Address space collision on device %s %pR\n",
+		   z->name, &z->resource);
 	sprintf(z->dev.bus_id, "%02x", i);
 	z->dev.parent = &zorro_bus.dev;
 	z->dev.bus = &zorro_bus_type;
-- 
GitLab


From 1fa0b29f3a43f9dd8080d24cd16790b15ef963f5 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: Tue, 30 Dec 2008 14:11:23 +0100
Subject: [PATCH 229/492] fbdev: Kill Atari vblank cursor blinking

Kill the last remaining vblank cursor blinking user

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 drivers/video/console/fbcon.c | 38 -----------------------------------
 1 file changed, 38 deletions(-)

diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index 4bcff81b50e..1657b9608b0 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -78,13 +78,6 @@
 #include <asm/fb.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#ifdef CONFIG_ATARI
-#include <asm/atariints.h>
-#endif
-#if defined(__mc68000__)
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#endif
 
 #include "fbcon.h"
 
@@ -155,9 +148,6 @@ static int fbcon_set_origin(struct vc_data *);
 
 #define CURSOR_DRAW_DELAY		(1)
 
-/* # VBL ints between cursor state changes */
-#define ATARI_CURSOR_BLINK_RATE		(42)
-
 static int vbl_cursor_cnt;
 static int fbcon_cursor_noblink;
 
@@ -403,20 +393,6 @@ static void fb_flashcursor(struct work_struct *work)
 	release_console_sem();
 }
 
-#ifdef CONFIG_ATARI
-static int cursor_blink_rate;
-static irqreturn_t fb_vbl_handler(int irq, void *dev_id)
-{
-	struct fb_info *info = dev_id;
-
-	if (vbl_cursor_cnt && --vbl_cursor_cnt == 0) {
-		schedule_work(&info->queue);	
-		vbl_cursor_cnt = cursor_blink_rate; 
-	}
-	return IRQ_HANDLED;
-}
-#endif
-	
 static void cursor_timer_handler(unsigned long dev_addr)
 {
 	struct fb_info *info = (struct fb_info *) dev_addr;
@@ -1017,15 +993,6 @@ static const char *fbcon_startup(void)
 		info->var.yres,
 		info->var.bits_per_pixel);
 
-#ifdef CONFIG_ATARI
-	if (MACH_IS_ATARI) {
-		cursor_blink_rate = ATARI_CURSOR_BLINK_RATE;
-		(void)request_irq(IRQ_AUTO_4, fb_vbl_handler,
-				IRQ_TYPE_PRIO, "framebuffer vbl",
-				info);
-	}
-#endif /* CONFIG_ATARI */
-
 	fbcon_add_cursor_timer(info);
 	fbcon_has_exited = 0;
 	return display_desc;
@@ -3454,11 +3421,6 @@ static void fbcon_exit(void)
 	if (fbcon_has_exited)
 		return;
 
-#ifdef CONFIG_ATARI
-	if (MACH_IS_ATARI)
-		free_irq(IRQ_AUTO_4, fb_vbl_handler);
-#endif
-
 	kfree((void *)softback_buf);
 	softback_buf = 0UL;
 
-- 
GitLab


From c162564ebf001e79448e8aa7a6e0ffee00b55f74 Mon Sep 17 00:00:00 2001
From: Andreas Schwab <schwab@suse.de>
Date: Mon, 29 Dec 2008 19:34:57 +0100
Subject: [PATCH 230/492] m68k: Wire up sys_restart_syscall

Make restart blocks working, required for proper syscall restarting.

Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/kernel/entry.S  |  2 +-
 arch/m68k/kernel/signal.c | 15 +++++++++++++++
 include/asm-m68k/unistd.h |  4 +---
 3 files changed, 17 insertions(+), 4 deletions(-)

diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index f28404d9a2b..5b780826647 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -424,7 +424,7 @@ resume:
 .data
 ALIGN
 sys_call_table:
-	.long sys_ni_syscall	/* 0  -  old "setup()" system call*/
+	.long sys_restart_syscall	/* 0 - old "setup()" system call, used for restarting */
 	.long sys_exit
 	.long sys_fork
 	.long sys_read
diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c
index f9af893cd28..de2d05ddd86 100644
--- a/arch/m68k/kernel/signal.c
+++ b/arch/m68k/kernel/signal.c
@@ -326,6 +326,9 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *usc, void __u
 	struct sigcontext context;
 	int err;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	/* get previous context */
 	if (copy_from_user(&context, usc, sizeof(context)))
 		goto badframe;
@@ -411,6 +414,9 @@ rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw,
 	unsigned long usp;
 	int err;
 
+	/* Always make any pending restarted system calls return -EINTR */
+	current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
 	err = __get_user(temp, &uc->uc_mcontext.version);
 	if (temp != MCONTEXT_VERSION)
 		goto badframe;
@@ -937,6 +943,15 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler)
 		regs->d0 = -EINTR;
 		break;
 
+	case -ERESTART_RESTARTBLOCK:
+		if (!has_handler) {
+			regs->d0 = __NR_restart_syscall;
+			regs->pc -= 2;
+			break;
+		}
+		regs->d0 = -EINTR;
+		break;
+
 	case -ERESTARTSYS:
 		if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) {
 			regs->d0 = -EINTR;
diff --git a/include/asm-m68k/unistd.h b/include/asm-m68k/unistd.h
index 965abb8bc7f..3c19027331f 100644
--- a/include/asm-m68k/unistd.h
+++ b/include/asm-m68k/unistd.h
@@ -5,6 +5,7 @@
  * This file contains the system call numbers.
  */
 
+#define __NR_restart_syscall	  0
 #define __NR_exit		  1
 #define __NR_fork		  2
 #define __NR_read		  3
@@ -359,9 +360,6 @@
 #define __ARCH_WANT_SYS_SIGPROCMASK
 #define __ARCH_WANT_SYS_RT_SIGACTION
 
-/* whitelist for checksyscalls */
-#define __IGNORE_restart_syscall
-
 /*
  * "Conditional" syscalls
  *
-- 
GitLab


From 877d52431f4d3cda4adea077ffbe88f3fd1755d3 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ZenIV.linux.org.uk>
Date: Mon, 5 Jan 2009 17:28:10 +0000
Subject: [PATCH 231/492] m68k: Fix --build-id breakage for sun3

Counterpart of commit 08a3db94f2a36c28278922732bc281c1722ceb18 ("m68k: Add
NOTES to init data so its discarded at boot") for sun3 build.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
---
 arch/m68k/kernel/vmlinux-sun3.lds | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index 8a4919e4d36..d9368c0709b 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -33,6 +33,7 @@ SECTIONS
 	} :data
   /* End of data goes *here* so that freeing init code works properly. */
   _edata = .;
+  NOTES
 
   /* will be freed after init */
   . = ALIGN(PAGE_SIZE);	/* Init code and data */
-- 
GitLab


From b1cf3e99dbca10cc3ed62ce354f6541e76ac8ea8 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
Date: Thu, 8 Jan 2009 12:04:27 +0000
Subject: [PATCH 232/492] [WATCHDOG] wm8350: Fix section annotations

The probe and remove functions were incorrectly annotated, with the
misannotation of the remove function causing build failures when built
in.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/wm8350_wdt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/wm8350_wdt.c b/drivers/watchdog/wm8350_wdt.c
index 2bc0d4d4b41..a2d2e8eb228 100644
--- a/drivers/watchdog/wm8350_wdt.c
+++ b/drivers/watchdog/wm8350_wdt.c
@@ -279,7 +279,7 @@ static struct miscdevice wm8350_wdt_miscdev = {
 	.fops = &wm8350_wdt_fops,
 };
 
-static int wm8350_wdt_probe(struct platform_device *pdev)
+static int __devinit wm8350_wdt_probe(struct platform_device *pdev)
 {
 	struct wm8350 *wm8350 = platform_get_drvdata(pdev);
 
@@ -296,7 +296,7 @@ static int wm8350_wdt_probe(struct platform_device *pdev)
 	return misc_register(&wm8350_wdt_miscdev);
 }
 
-static int __exit wm8350_wdt_remove(struct platform_device *pdev)
+static int __devexit wm8350_wdt_remove(struct platform_device *pdev)
 {
 	misc_deregister(&wm8350_wdt_miscdev);
 
@@ -305,7 +305,7 @@ static int __exit wm8350_wdt_remove(struct platform_device *pdev)
 
 static struct platform_driver wm8350_wdt_driver = {
 	.probe = wm8350_wdt_probe,
-	.remove = wm8350_wdt_remove,
+	.remove = __devexit_p(wm8350_wdt_remove),
 	.driver = {
 		.name = "wm8350-wdt",
 	},
-- 
GitLab


From 3268b5618f387c6b78b8f8b1190d43380c8170ac Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Mon, 10 Nov 2008 12:31:26 +0000
Subject: [PATCH 233/492] [WATCHDOG] Basic support for GE Fanuc's FPGA based
 watchdog timer

GE Fanuc SBC610

Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310,
SBC610 and PPC9A Single Board Computers.

This patch adds support for the watchdog timer found in one of the devices
FPGAs. There are two identical watchdog timers at different offsets in the
above mentioned boards, this driver is capable of supporting one of them.
The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/Kconfig   |   6 +
 drivers/watchdog/Makefile  |   1 +
 drivers/watchdog/gef_wdt.c | 330 +++++++++++++++++++++++++++++++++++++
 3 files changed, 337 insertions(+)
 create mode 100644 drivers/watchdog/gef_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ec68c741b56..d55d315d66d 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -770,6 +770,12 @@ config TXX9_WDT
 
 # POWERPC Architecture
 
+config GEF_WDT
+	tristate "GE Fanuc Watchdog Timer"
+	depends on GEF_SBC610
+	---help---
+	  Watchdog timer found in a number of GE Fanuc single board computers.
+
 config MPC5200_WDT
 	tristate "MPC5200 Watchdog Timer"
 	depends on PPC_MPC52xx
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index c19b866f5ed..e79187a7950 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -111,6 +111,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
 # PARISC Architecture
 
 # POWERPC Architecture
+obj-$(CONFIG_GEF_WDT) += gef_wdt.o
 obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o
 obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
 obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
new file mode 100644
index 00000000000..f0c2b7a1a17
--- /dev/null
+++ b/drivers/watchdog/gef_wdt.c
@@ -0,0 +1,330 @@
+/*
+ * GE Fanuc watchdog userspace interface
+ *
+ * Author:  Martyn Welch <martyn.welch@gefanuc.com>
+ *
+ * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: mv64x60_wdt.c (MV64X60 watchdog userspace interface)
+ *   Author: James Chapman <jchapman@katalix.com>
+ */
+
+/* TODO:
+ * This driver does not provide support for the hardwares capability of sending
+ * an interrupt at a programmable threshold.
+ *
+ * This driver currently can only support 1 watchdog - there are 2 in the
+ * hardware that this driver supports. Thus one could be configured as a
+ * process-based watchdog (via /dev/watchdog), the second (using the interrupt
+ * capabilities) a kernel-based watchdog.
+ */
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <sysdev/fsl_soc.h>
+
+/*
+ * The watchdog configuration register contains a pair of 2-bit fields,
+ *   1.  a reload field, bits 27-26, which triggers a reload of
+ *       the countdown register, and
+ *   2.  an enable field, bits 25-24, which toggles between
+ *       enabling and disabling the watchdog timer.
+ * Bit 31 is a read-only field which indicates whether the
+ * watchdog timer is currently enabled.
+ *
+ * The low 24 bits contain the timer reload value.
+ */
+#define GEF_WDC_ENABLE_SHIFT	24
+#define GEF_WDC_SERVICE_SHIFT	26
+#define GEF_WDC_ENABLED_SHIFT	31
+
+#define GEF_WDC_ENABLED_TRUE	1
+#define GEF_WDC_ENABLED_FALSE	0
+
+/* Flags bits */
+#define GEF_WDOG_FLAG_OPENED	0
+
+static unsigned long wdt_flags;
+static int wdt_status;
+static void __iomem *gef_wdt_regs;
+static int gef_wdt_timeout;
+static int gef_wdt_count;
+static unsigned int bus_clk;
+static char expect_close;
+static DEFINE_SPINLOCK(gef_wdt_spinlock);
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+
+static int gef_wdt_toggle_wdc(int enabled_predicate, int field_shift)
+{
+	u32 data;
+	u32 enabled;
+	int ret = 0;
+
+	spin_lock(&gef_wdt_spinlock);
+	data = ioread32be(gef_wdt_regs);
+	enabled = (data >> GEF_WDC_ENABLED_SHIFT) & 1;
+
+	/* only toggle the requested field if enabled state matches predicate */
+	if ((enabled ^ enabled_predicate) == 0) {
+		/* We write a 1, then a 2 -- to the appropriate field */
+		data = (1 << field_shift) | gef_wdt_count;
+		iowrite32be(data, gef_wdt_regs);
+
+		data = (2 << field_shift) | gef_wdt_count;
+		iowrite32be(data, gef_wdt_regs);
+		ret = 1;
+	}
+	spin_unlock(&gef_wdt_spinlock);
+
+	return ret;
+}
+
+static void gef_wdt_service(void)
+{
+	gef_wdt_toggle_wdc(GEF_WDC_ENABLED_TRUE,
+		GEF_WDC_SERVICE_SHIFT);
+}
+
+static void gef_wdt_handler_enable(void)
+{
+	if (gef_wdt_toggle_wdc(GEF_WDC_ENABLED_FALSE,
+				   GEF_WDC_ENABLE_SHIFT)) {
+		gef_wdt_service();
+		printk(KERN_NOTICE "gef_wdt: watchdog activated\n");
+	}
+}
+
+static void gef_wdt_handler_disable(void)
+{
+	if (gef_wdt_toggle_wdc(GEF_WDC_ENABLED_TRUE,
+				   GEF_WDC_ENABLE_SHIFT))
+		printk(KERN_NOTICE "gef_wdt: watchdog deactivated\n");
+}
+
+static void gef_wdt_set_timeout(unsigned int timeout)
+{
+	/* maximum bus cycle count is 0xFFFFFFFF */
+	if (timeout > 0xFFFFFFFF / bus_clk)
+		timeout = 0xFFFFFFFF / bus_clk;
+
+	/* Register only holds upper 24 bits, bit shifted into lower 24 */
+	gef_wdt_count = (timeout * bus_clk) >> 8;
+	gef_wdt_timeout = timeout;
+}
+
+
+static ssize_t gef_wdt_write(struct file *file, const char __user *data,
+				 size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 42;
+			}
+		}
+		gef_wdt_service();
+	}
+
+	return len;
+}
+
+static long gef_wdt_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
+{
+	int timeout;
+	int options;
+	void __user *argp = (void __user *)arg;
+	static struct watchdog_info info = {
+		.options =	WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+				WDIOF_KEEPALIVEPING,
+		.firmware_version = 0,
+		.identity = "GE Fanuc watchdog",
+	};
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &info, sizeof(info)))
+			return -EFAULT;
+		break;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		if (put_user(wdt_status, (int __user *)argp))
+			return -EFAULT;
+		wdt_status &= ~WDIOF_KEEPALIVEPING;
+		break;
+
+	case WDIOC_SETOPTIONS:
+		if (get_user(options, (int __user *)argp))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD)
+			gef_wdt_handler_disable();
+
+		if (options & WDIOS_ENABLECARD)
+			gef_wdt_handler_enable();
+		break;
+
+	case WDIOC_KEEPALIVE:
+		gef_wdt_service();
+		wdt_status |= WDIOF_KEEPALIVEPING;
+		break;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(timeout, (int __user *)argp))
+			return -EFAULT;
+		gef_wdt_set_timeout(timeout);
+		/* Fall through */
+
+	case WDIOC_GETTIMEOUT:
+		if (put_user(gef_wdt_timeout, (int __user *)argp))
+			return -EFAULT;
+		break;
+
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static int gef_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(GEF_WDOG_FLAG_OPENED, &wdt_flags))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	gef_wdt_handler_enable();
+
+	return nonseekable_open(inode, file);
+}
+
+static int gef_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close == 42)
+		gef_wdt_handler_disable();
+	else {
+		printk(KERN_CRIT
+		       "gef_wdt: unexpected close, not stopping timer!\n");
+		gef_wdt_service();
+	}
+	expect_close = 0;
+
+	clear_bit(GEF_WDOG_FLAG_OPENED, &wdt_flags);
+
+	return 0;
+}
+
+static const struct file_operations gef_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.write = gef_wdt_write,
+	.unlocked_ioctl = gef_wdt_ioctl,
+	.open = gef_wdt_open,
+	.release = gef_wdt_release,
+};
+
+static struct miscdevice gef_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &gef_wdt_fops,
+};
+
+
+static int __devinit gef_wdt_probe(struct of_device *dev,
+	const struct of_device_id *match)
+{
+	int timeout = 10;
+	u32 freq;
+
+	bus_clk = 133; /* in MHz */
+
+	freq = fsl_get_sys_freq();
+	if (freq > 0)
+		bus_clk = freq;
+
+	/* Map devices registers into memory */
+	gef_wdt_regs = of_iomap(dev->node, 0);
+	if (gef_wdt_regs == NULL)
+		return -ENOMEM;
+
+	gef_wdt_set_timeout(timeout);
+
+	gef_wdt_handler_disable();	/* in case timer was already running */
+
+	return misc_register(&gef_wdt_miscdev);
+}
+
+static int __devexit gef_wdt_remove(struct platform_device *dev)
+{
+	misc_deregister(&gef_wdt_miscdev);
+
+	gef_wdt_handler_disable();
+
+	iounmap(gef_wdt_regs);
+
+	return 0;
+}
+
+static const struct of_device_id gef_wdt_ids[] = {
+	{
+		.compatible = "gef,fpga-wdt",
+	},
+	{},
+};
+
+static struct of_platform_driver gef_wdt_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "gef_wdt",
+	.match_table	= gef_wdt_ids,
+	.probe		= gef_wdt_probe,
+};
+
+static int __init gef_wdt_init(void)
+{
+	printk(KERN_INFO "GE Fanuc watchdog driver\n");
+	return of_register_platform_driver(&gef_wdt_driver);
+}
+
+static void __exit gef_wdt_exit(void)
+{
+	of_unregister_platform_driver(&gef_wdt_driver);
+}
+
+module_init(gef_wdt_init);
+module_exit(gef_wdt_exit);
+
+MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com>");
+MODULE_DESCRIPTION("GE Fanuc watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+MODULE_ALIAS("platform: gef_wdt");
-- 
GitLab


From 6ec9eae67a82a38865af20580e5e0ccd012aca4b Mon Sep 17 00:00:00 2001
From: Martyn Welch <martyn.welch@gefanuc.com>
Date: Mon, 10 Nov 2008 12:31:33 +0000
Subject: [PATCH 234/492] [WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610

Support for the FPGA based watchdog timer on GE Fanuc's SBC610.

This patch enables one of the watchdog timers found on the SBC610. There are
two identical watchdog timers at different offsets in the above mentioned
boards, however the current driver is only capable of supporting one of them.

The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 arch/powerpc/boot/dts/gef_sbc610.dts           | 15 +++++++++++++++
 arch/powerpc/configs/86xx/gef_sbc610_defconfig |  1 +
 2 files changed, 16 insertions(+)

diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index 9708b3423bb..e78c355c7ba 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -88,6 +88,21 @@
 			compatible = "gef,fpga-regs";
 			reg = <0x4 0x0 0x40>;
 		};
+
+		wdt@4,2000 {
+			compatible = "gef,fpga-wdt";
+			reg = <0x4 0x2000 0x8>;
+			interrupts = <0x1a 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		/* Second watchdog available, driver currently supports one.
+		wdt@4,2010 {
+			compatible = "gef,fpga-wdt";
+			reg = <0x4 0x2010 0x8>;
+			interrupts = <0x1b 0x4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
 		gef_pic: pic@4,4000 {
 			#interrupt-cells = <1>;
 			interrupt-controller;
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index cd1ffa44932..391874c7b43 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1164,6 +1164,7 @@ CONFIG_WATCHDOG=y
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_ALIM7101_WDT is not set
 # CONFIG_8xxx_WDT is not set
+CONFIG_GEF_WDT=y
 
 #
 # PCI-based Watchdog Cards
-- 
GitLab


From 618efba999d0e7f4bcde93231dcb9a748223c6e3 Mon Sep 17 00:00:00 2001
From: Sean MacLennan <smaclennan@pikatech.com>
Date: Tue, 23 Sep 2008 20:26:26 -0400
Subject: [PATCH 235/492] [WATCHDOG] Pika Warp appliance watchdog timer

The FPGA based watchdog timer used by the Pika Warp appliance.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/Kconfig    |   8 +
 drivers/watchdog/Makefile   |   1 +
 drivers/watchdog/pika_wdt.c | 301 ++++++++++++++++++++++++++++++++++++
 3 files changed, 310 insertions(+)
 create mode 100644 drivers/watchdog/pika_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index d55d315d66d..3efa12f9ee5 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -796,6 +796,14 @@ config MV64X60_WDT
 	tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
 	depends on MV64X60
 
+config PIKA_WDT
+	tristate "PIKA FPGA Watchdog"
+	depends on WARP
+	default y
+	help
+	  This enables the watchdog in the PIKA FPGA. Currently used on
+	  the Warp platform.
+
 config BOOKE_WDT
 	bool "PowerPC Book-E Watchdog Timer"
 	depends on BOOKE || 4xx
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index e79187a7950..806b3eb0853 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -115,6 +115,7 @@ obj-$(CONFIG_GEF_WDT) += gef_wdt.o
 obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o
 obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
 obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
+obj-$(CONFIG_PIKA_WDT) += pika_wdt.o
 obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
 
 # PPC64 Architecture
diff --git a/drivers/watchdog/pika_wdt.c b/drivers/watchdog/pika_wdt.c
new file mode 100644
index 00000000000..2d22e996e99
--- /dev/null
+++ b/drivers/watchdog/pika_wdt.c
@@ -0,0 +1,301 @@
+/*
+ * PIKA FPGA based Watchdog Timer
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ *   Sean MacLennan <smaclennan@pikatech.com>
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/reboot.h>
+#include <linux/jiffies.h>
+#include <linux/timer.h>
+#include <linux/bitops.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/of_platform.h>
+
+#define DRV_NAME "PIKA-WDT"
+#define PFX DRV_NAME ": "
+
+/* Hardware timeout in seconds */
+#define WDT_HW_TIMEOUT 2
+
+/* Timer heartbeat (500ms) */
+#define WDT_TIMEOUT	(HZ/2)
+
+/* User land timeout */
+#define WDT_HEARTBEAT 15
+static int heartbeat = WDT_HEARTBEAT;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. "
+	"(default = " __MODULE_STRING(WDT_HEARTBEAT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started "
+	"(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct {
+	void __iomem *fpga;
+	unsigned long next_heartbeat;	/* the next_heartbeat for the timer */
+	unsigned long open;
+	char expect_close;
+	int bootstatus;
+	struct timer_list timer;	/* The timer that pings the watchdog */
+} pikawdt_private;
+
+static struct watchdog_info ident = {
+	.identity	= DRV_NAME,
+	.options	= WDIOF_CARDRESET |
+			  WDIOF_SETTIMEOUT |
+			  WDIOF_KEEPALIVEPING |
+			  WDIOF_MAGICCLOSE,
+};
+
+/*
+ * Reload the watchdog timer.  (ie, pat the watchdog)
+ */
+static inline void pikawdt_reset(void)
+{
+	/* -- FPGA: Reset Control Register (32bit R/W) (Offset: 0x14) --
+	 * Bit 7,    WTCHDG_EN: When set to 1, the watchdog timer is enabled.
+	 *           Once enabled, it cannot be disabled. The watchdog can be
+	 *           kicked by performing any write access to the reset
+	 *           control register (this register).
+	 * Bit 8-11, WTCHDG_TIMEOUT_SEC: Sets the watchdog timeout value in
+	 *           seconds. Valid ranges are 1 to 15 seconds. The value can
+	 *           be modified dynamically.
+	 */
+	unsigned reset = in_be32(pikawdt_private.fpga + 0x14);
+	/* enable with max timeout - 15 seconds */
+	reset |= (1 << 7) + (WDT_HW_TIMEOUT << 8);
+	out_be32(pikawdt_private.fpga + 0x14, reset);
+}
+
+/*
+ * Timer tick
+ */
+static void pikawdt_ping(unsigned long data)
+{
+	if (time_before(jiffies, pikawdt_private.next_heartbeat) ||
+			(!nowayout && !pikawdt_private.open)) {
+		pikawdt_reset();
+		mod_timer(&pikawdt_private.timer, jiffies + WDT_TIMEOUT);
+	} else
+		printk(KERN_CRIT PFX "I will reset your machine !\n");
+}
+
+
+static void pikawdt_keepalive(void)
+{
+	pikawdt_private.next_heartbeat = jiffies + heartbeat * HZ;
+}
+
+static void pikawdt_start(void)
+{
+	pikawdt_keepalive();
+	mod_timer(&pikawdt_private.timer, jiffies + WDT_TIMEOUT);
+}
+
+/*
+ * Watchdog device is opened, and watchdog starts running.
+ */
+static int pikawdt_open(struct inode *inode, struct file *file)
+{
+	/* /dev/watchdog can only be opened once */
+	if (test_and_set_bit(0, &pikawdt_private.open))
+		return -EBUSY;
+
+	pikawdt_start();
+
+	return nonseekable_open(inode, file);
+}
+
+/*
+ * Close the watchdog device.
+ */
+static int pikawdt_release(struct inode *inode, struct file *file)
+{
+	/* stop internal ping */
+	if (!pikawdt_private.expect_close)
+		del_timer(&pikawdt_private.timer);
+
+	clear_bit(0, &pikawdt_private.open);
+	pikawdt_private.expect_close = 0;
+	return 0;
+}
+
+/*
+ * Pat the watchdog whenever device is written to.
+ */
+static ssize_t pikawdt_write(struct file *file, const char __user *data,
+			     size_t len, loff_t *ppos)
+{
+	if (!len)
+		return 0;
+
+	/* Scan for magic character */
+	if (!nowayout) {
+		size_t i;
+
+		pikawdt_private.expect_close = 0;
+
+		for (i = 0; i < len; i++) {
+			char c;
+			if (get_user(c, data + i))
+				return -EFAULT;
+			if (c == 'V') {
+				pikawdt_private.expect_close = 42;
+				break;
+			}
+		}
+	}
+
+	pikawdt_keepalive();
+
+	return len;
+}
+
+/*
+ * Handle commands from user-space.
+ */
+static long pikawdt_ioctl(struct file *file,
+		unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int __user *p = argp;
+	int new_value;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+
+	case WDIOC_GETSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(pikawdt_private.bootstatus, p);
+
+	case WDIOC_KEEPALIVE:
+		pikawdt_keepalive();
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(new_value, p))
+			return -EFAULT;
+
+		heartbeat = new_value;
+		pikawdt_keepalive();
+
+		return put_user(new_value, p);  /* return current value */
+
+	case WDIOC_GETTIMEOUT:
+		return put_user(heartbeat, p);
+	}
+	return -ENOTTY;
+}
+
+
+static const struct file_operations pikawdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.open		= pikawdt_open,
+	.release	= pikawdt_release,
+	.write		= pikawdt_write,
+	.unlocked_ioctl	= pikawdt_ioctl,
+};
+
+static struct miscdevice pikawdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &pikawdt_fops,
+};
+
+static int __init pikawdt_init(void)
+{
+	struct device_node *np;
+	void __iomem *fpga;
+	static u32 post1;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL, "pika,fpga");
+	if (np == NULL) {
+		printk(KERN_ERR PFX "Unable to find fpga.\n");
+		return -ENOENT;
+	}
+
+	pikawdt_private.fpga = of_iomap(np, 0);
+	of_node_put(np);
+	if (pikawdt_private.fpga == NULL) {
+		printk(KERN_ERR PFX "Unable to map fpga.\n");
+		return -ENOMEM;
+	}
+
+	ident.firmware_version = in_be32(pikawdt_private.fpga + 0x1c) & 0xffff;
+
+	/* POST information is in the sd area. */
+	np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd");
+	if (np == NULL) {
+		printk(KERN_ERR PFX "Unable to find fpga-sd.\n");
+		ret = -ENOENT;
+		goto out;
+	}
+
+	fpga = of_iomap(np, 0);
+	of_node_put(np);
+	if (fpga == NULL) {
+		printk(KERN_ERR PFX "Unable to map fpga-sd.\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* -- FPGA: POST Test Results Register 1 (32bit R/W) (Offset: 0x4040) --
+	 * Bit 31,   WDOG: Set to 1 when the last reset was caused by a watchdog
+	 *           timeout.
+	 */
+	post1 = in_be32(fpga + 0x40);
+	if (post1 & 0x80000000)
+		pikawdt_private.bootstatus = WDIOF_CARDRESET;
+
+	iounmap(fpga);
+
+	setup_timer(&pikawdt_private.timer, pikawdt_ping, 0);
+
+	ret = misc_register(&pikawdt_miscdev);
+	if (ret) {
+		printk(KERN_ERR PFX "Unable to register miscdev.\n");
+		goto out;
+	}
+
+	printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
+							heartbeat, nowayout);
+	return 0;
+
+out:
+	iounmap(pikawdt_private.fpga);
+	return ret;
+}
+
+static void __exit pikawdt_exit(void)
+{
+	misc_deregister(&pikawdt_miscdev);
+
+	iounmap(pikawdt_private.fpga);
+}
+
+module_init(pikawdt_init);
+module_exit(pikawdt_exit);
+
+MODULE_AUTHOR("Sean MacLennan <smaclennan@pikatech.com>");
+MODULE_DESCRIPTION("PIKA FPGA based Watchdog Timer");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
-- 
GitLab


From c774bda2fdc5412124a854a791d9f6f52936ff81 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Sun, 11 Jan 2009 19:46:49 +0000
Subject: [PATCH 236/492] pty: Fix documentation

The pty changes and updates for window sizing forgot to correct the
kerneldoc

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/pty.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 146c97613da..31038a0052a 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -230,9 +230,7 @@ static void pty_set_termios(struct tty_struct *tty,
 /**
  *	pty_do_resize		-	resize event
  *	@tty: tty being resized
- *	@real_tty: real tty (not the same as tty if using a pty/tty pair)
- *	@rows: rows (character)
- *	@cols: cols (character)
+ *	@ws: window size being set.
  *
  *	Update the termios variables and send the neccessary signals to
  *	peform a terminal resize correctly
-- 
GitLab


From 21b56ec4e96f2bd8c584db41bd9a42c6cb71fdac Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Sun, 11 Jan 2009 19:48:34 +0000
Subject: [PATCH 237/492] neo: Remove a bogus NULL check

Julia Lawall found an un-needed check in the neo driver. Her patch moves
the check to cover the code dereferencing it, however it cannot be NULL
anyway so remove the NULL check instead.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/jsm/jsm_neo.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/serial/jsm/jsm_neo.c b/drivers/serial/jsm/jsm_neo.c
index b7584ca55ad..e6390d02363 100644
--- a/drivers/serial/jsm/jsm_neo.c
+++ b/drivers/serial/jsm/jsm_neo.c
@@ -577,9 +577,6 @@ static void neo_parse_modem(struct jsm_channel *ch, u8 signals)
 	jsm_printk(MSIGS, INFO, &ch->ch_bd->pci_dev,
 			"neo_parse_modem: port: %d msignals: %x\n", ch->ch_portnum, msignals);
 
-	if (!ch)
-		return;
-
 	/* Scrub off lower bits. They signify delta's, which I don't care about */
 	/* Keep DDCD and DDSR though */
 	msignals &= 0xf8;
-- 
GitLab


From bf0672db79c18ce38d1783be982051a718a0bc22 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Sun, 11 Jan 2009 19:48:41 +0000
Subject: [PATCH 238/492] usb-serial: remove NULL check

Julia Lawell found a case where a NULL check was misplaced in the
usb-serial code. However as the object in question cannot be NULL the
check can simply be removed.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/usb-serial.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 080ade223d5..cfcfd5ab06c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -511,9 +511,6 @@ static void usb_serial_port_work(struct work_struct *work)
 
 	dbg("%s - port %d", __func__, port->number);
 
-	if (!port)
-		return;
-
 	tty = tty_port_tty_get(&port->port);
 	if (!tty)
 		return;
-- 
GitLab


From 05a3d9050ad7bb791b9ba306165ea98e6d9e9da2 Mon Sep 17 00:00:00 2001
From: Chris Adams <cmadams@hiwaay.net>
Date: Sun, 11 Jan 2009 19:48:53 +0000
Subject: [PATCH 239/492] ti_usb_3410_5052: support alternate firmware

The TI USB serial driver supports specifying alternate vendor and
product IDs (since the chips can and are used in devices under other
vendor/product IDs).  However, the alternate IDs were not loaded in the
combined product table.  This patch also adds support for loading
alternate firmware for alternate vendor/product IDs.

Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 44 ++++++++++++++++++---------
 1 file changed, 29 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 01d0c70d60e..1cdb1515253 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -145,7 +145,7 @@ static int ti_command_in_sync(struct ti_device *tdev, __u8 command,
 static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
 	__u8 mask, __u8 byte);
 
-static int ti_download_firmware(struct ti_device *tdev, int type);
+static int ti_download_firmware(struct ti_device *tdev);
 
 /* circular buffer */
 static struct circ_buf *ti_buf_alloc(void);
@@ -176,7 +176,7 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[2+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 };
@@ -188,7 +188,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
 };
 
-static struct usb_device_id ti_id_table_combined[] = {
+static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
@@ -304,21 +304,28 @@ MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
 
 static int __init ti_init(void)
 {
-	int i, j;
+	int i, j, c;
 	int ret;
 
 	/* insert extra vendor and product ids */
+	c = ARRAY_SIZE(ti_id_table_combined) - 2 * TI_EXTRA_VID_PID_COUNT - 1;
 	j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
-	for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++) {
+	for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++, c++) {
 		ti_id_table_3410[j].idVendor = vendor_3410[i];
 		ti_id_table_3410[j].idProduct = product_3410[i];
 		ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+		ti_id_table_combined[c].idVendor = vendor_3410[i];
+		ti_id_table_combined[c].idProduct = product_3410[i];
+		ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 	}
 	j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
-	for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++) {
+	for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++, c++) {
 		ti_id_table_5052[j].idVendor = vendor_5052[i];
 		ti_id_table_5052[j].idProduct = product_5052[i];
 		ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
+		ti_id_table_combined[c].idVendor = vendor_5052[i];
+		ti_id_table_combined[c].idProduct = product_5052[i];
+		ti_id_table_combined[c].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
 	}
 
 	ret = usb_serial_register(&ti_1port_device);
@@ -390,11 +397,7 @@ static int ti_startup(struct usb_serial *serial)
 
 	/* if we have only 1 configuration, download firmware */
 	if (dev->descriptor.bNumConfigurations == 1) {
-		if (tdev->td_is_3410)
-			status = ti_download_firmware(tdev, 3410);
-		else
-			status = ti_download_firmware(tdev, 5052);
-		if (status)
+		if ((status = ti_download_firmware(tdev)) != 0)
 			goto free_tdev;
 
 		/* 3410 must be reset, 5052 resets itself */
@@ -1671,9 +1674,9 @@ static int ti_do_download(struct usb_device *dev, int pipe,
 	return status;
 }
 
-static int ti_download_firmware(struct ti_device *tdev, int type)
+static int ti_download_firmware(struct ti_device *tdev)
 {
-	int status = -ENOMEM;
+	int status;
 	int buffer_size;
 	__u8 *buffer;
 	struct usb_device *dev = tdev->td_serial->dev;
@@ -1681,9 +1684,18 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
 		tdev->td_serial->port[0]->bulk_out_endpointAddress);
 	const struct firmware *fw_p;
 	char buf[32];
-	sprintf(buf, "ti_usb-%d.bin", type);
 
-	if (request_firmware(&fw_p, buf, &dev->dev)) {
+	/* try ID specific firmware first, then try generic firmware */
+	sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
+	    dev->descriptor.idProduct);
+	if ((status = request_firmware(&fw_p, buf, &dev->dev)) != 0) {
+		if (tdev->td_is_3410)
+			strcpy(buf, "ti_3410.fw");
+		else
+			strcpy(buf, "ti_5052.fw");
+		status = request_firmware(&fw_p, buf, &dev->dev);
+	}
+	if (status) {
 		dev_err(&dev->dev, "%s - firmware not found\n", __func__);
 		return -ENOENT;
 	}
@@ -1699,6 +1711,8 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
 		memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
 		status = ti_do_download(dev, pipe, buffer, fw_p->size);
 		kfree(buffer);
+	} else {
+		status = -ENOMEM;
 	}
 	release_firmware(fw_p);
 	if (status) {
-- 
GitLab


From cb7a7c6a2cae5696b8aa636e86e9befd3dd00318 Mon Sep 17 00:00:00 2001
From: Chris Adams <cmadams@hiwaay.net>
Date: Sun, 11 Jan 2009 19:49:00 +0000
Subject: [PATCH 240/492] ti_usb_3410_5052: add Multi-Tech modem support

Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver.

Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 36 +++++++++++++++++++++++----
 drivers/usb/serial/ti_usb_3410_5052.h |  8 ++++++
 2 files changed, 39 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 1cdb1515253..dbae9941baa 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -176,9 +176,14 @@ static unsigned int product_5052_count;
 /* the array dimension is the number of default entries plus */
 /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
 /* null entry */
-static struct usb_device_id ti_id_table_3410[2+TI_EXTRA_VID_PID_COUNT+1] = {
+static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -191,6 +196,11 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
 static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = {
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_NO_FW_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) },
+	{ USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
 	{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
@@ -1689,10 +1699,26 @@ static int ti_download_firmware(struct ti_device *tdev)
 	sprintf(buf, "ti_usb-v%04x-p%04x.fw", dev->descriptor.idVendor,
 	    dev->descriptor.idProduct);
 	if ((status = request_firmware(&fw_p, buf, &dev->dev)) != 0) {
-		if (tdev->td_is_3410)
-			strcpy(buf, "ti_3410.fw");
-		else
-			strcpy(buf, "ti_5052.fw");
+		buf[0] = '\0';
+		if (dev->descriptor.idVendor == MTS_VENDOR_ID) {
+			switch (dev->descriptor.idProduct) {
+			case MTS_CDMA_PRODUCT_ID:
+				strcpy(buf, "mts_cdma.fw");
+				break;
+			case MTS_GSM_PRODUCT_ID:
+				strcpy(buf, "mts_gsm.fw");
+				break;
+			case MTS_EDGE_PRODUCT_ID:
+				strcpy(buf, "mts_edge.fw");
+				break;
+			}
+		}
+		if (buf[0] == '\0') {
+			if (tdev->td_is_3410)
+				strcpy(buf, "ti_3410.fw");
+			else
+				strcpy(buf, "ti_5052.fw");
+		}
 		status = request_firmware(&fw_p, buf, &dev->dev);
 	}
 	if (status) {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index b5541bf991b..7e4752fbf23 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -34,6 +34,14 @@
 #define TI_5052_EEPROM_PRODUCT_ID	0x505A	/* EEPROM, no firmware */
 #define TI_5052_FIRMWARE_PRODUCT_ID	0x505F	/* firmware is running */
 
+/* Multi-Tech vendor and product ids */
+#define MTS_VENDOR_ID			0x06E0
+#define MTS_GSM_NO_FW_PRODUCT_ID	0xF108
+#define MTS_CDMA_NO_FW_PRODUCT_ID	0xF109
+#define MTS_CDMA_PRODUCT_ID		0xF110
+#define MTS_GSM_PRODUCT_ID		0xF111
+#define MTS_EDGE_PRODUCT_ID		0xF112
+
 /* Commands */
 #define TI_GET_VERSION			0x01
 #define TI_GET_PORT_STATUS		0x02
-- 
GitLab


From 7df52316601bfe308e427e0882f3e801682d800b Mon Sep 17 00:00:00 2001
From: Chris Adams <cmadams@hiwaay.net>
Date: Sun, 11 Jan 2009 19:49:11 +0000
Subject: [PATCH 241/492] ti_usb_3410_5052: add Multi-Tech firmware

Add the Multi-Tech cellular modem firmware to the TI USB serial driver.
This firmware was extracted from:

ftp://ftp.multitech.com/wireless/wireless_linux.zip

Firmware licence: "all firmware components are redistributable in binary
	form" per support@multitech.com
	Copyright (C) 2005 Multi-Tech Systems, Inc.

Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ti_usb_3410_5052.c |   3 +
 firmware/Makefile                     |   3 +-
 firmware/WHENCE                       |  16 +-
 firmware/mts_cdma.fw.ihex             | 867 +++++++++++++++++++++++++
 firmware/mts_edge.fw.ihex             | 881 ++++++++++++++++++++++++++
 firmware/mts_gsm.fw.ihex              | 867 +++++++++++++++++++++++++
 6 files changed, 2635 insertions(+), 2 deletions(-)
 create mode 100644 firmware/mts_cdma.fw.ihex
 create mode 100644 firmware/mts_edge.fw.ihex
 create mode 100644 firmware/mts_gsm.fw.ihex

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index dbae9941baa..3cf41df302d 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -282,6 +282,9 @@ MODULE_LICENSE("GPL");
 
 MODULE_FIRMWARE("ti_3410.fw");
 MODULE_FIRMWARE("ti_5052.fw");
+MODULE_FIRMWARE("mts_cdma.fw");
+MODULE_FIRMWARE("mts_gsm.fw");
+MODULE_FIRMWARE("mts_edge.fw");
 
 module_param(debug, bool, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
diff --git a/firmware/Makefile b/firmware/Makefile
index ea1d28f9b44..466106fa214 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -78,7 +78,8 @@ fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw	\
 	keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw		\
 	keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
 endif
-fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
+fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \
+				      mts_cdma.fw mts_gsm.fw mts_edge.fw
 fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
 					    edgeport/down.fw edgeport/down2.fw
 fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 8b565134779..524113f9bea 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -191,7 +191,7 @@ Original licence information: None
 
 --------------------------------------------------------------------------
 
-Driver: tu_usb_3410_5052 -- USB TI 3410/5052 serial device
+Driver: ti_usb_3410_5052 -- USB TI 3410/5052 serial device
 
 File: ti_3410.fw
 Info: firmware 9/10/04 FW3410_Special_StartWdogOnStartPort
@@ -206,6 +206,20 @@ Found in hex form in kernel source.
 
 --------------------------------------------------------------------------
 
+Driver: ti_usb_3410_5052 -- Multi-Tech USB cell modems
+
+File: mts_cdma.fw
+File: mts_gsm.fw
+File: mts_edge.fw
+
+Licence: "all firmware components are redistributable in binary form"
+         per support@multitech.com
+	 Copyright (C) 2005 Multi-Tech Systems, Inc.
+
+Found in hex form in ftp://ftp.multitech.com/wireless/wireless_linux.zip
+
+--------------------------------------------------------------------------
+
 Driver: whiteheat -- USB ConnectTech WhiteHEAT serial device
 
 File: whiteheat.fw
diff --git a/firmware/mts_cdma.fw.ihex b/firmware/mts_cdma.fw.ihex
new file mode 100644
index 00000000000..f6ad0cbd30c
--- /dev/null
+++ b/firmware/mts_cdma.fw.ihex
@@ -0,0 +1,867 @@
+:1000000014360002001E021AF9FFFFFFFFFF023341
+:100010001DFFFFFFFFFFFFFFFFFFFFFFFFFF02339B
+:10002000C87581CE90FDE88583A012353CEC4D600B
+:100030007378AB8003760018B89CFA787F800376DB
+:100040000018B865FA78208003760018B820FA788E
+:10005000208003760018B81FFA90FDDDAE83AF82D2
+:1000600090FBF81200AA6005E4F0A380F690FDE88A
+:10007000A88290FDE8A982E8696005E4F20880F7AB
+:100080009001081200B390010C1200B390011012FD
+:1000900000B39001141200D190011A1200D1900106
+:1000A000201200D175D00012341A020126EF6582A9
+:1000B0007003EE658322E493F8740193F97402935C
+:1000C000FE740393F5828E83E869700122E493F64F
+:1000D000A30880F4E493FC740193FD740293FE740E
+:1000E0000393FF740493F8740593F58288831200D8
+:1000F000AA700122E493A3A883A9828C838D82F045
+:10010000A3AC83AD828883898280E32121049B8014
+:1001100080049BACAE049BFDE8049D049DFBF304AE
+:10012000A2049DFBF30502050280FED0F030F00929
+:1001300020F303F68010F7800D30F10920F303F26D
+:100140008004F38001F020F404FCD0E0CC22CCC089
+:10015000E0120163020154BC0005D0F0ACF022C3F0
+:1001600013DCFC02012ABF0009ED258275F001F8BD
+:10017000E622BF010FED2582F582EE3583F583750A
+:10018000F004E022ED258275F002F8E222D083D05F
+:1001900082F5F0C3E493A3C5F095F0C0E0C3D0F0BE
+:1001A000E493A395F04012A3A3C3E5F033500205F6
+:1001B000832582F58250020583740193C0E0E493A5
+:1001C000C0E022D083D082F5F0E4937009740193EB
+:1001D0007004A3A3800C74029365F06005A3A3A32D
+:1001E00080E7740193C0E0E493C0E022120264024D
+:1001F00001FB1202B80201FB1202DC0201FB30E03B
+:100200000720E302E622E72230E10720E302E222B0
+:10021000E32230E202E022E493221202DC02022313
+:100220001202B8020223ABF012022DCBC5F0CB2292
+:1002300030E01020E306E6F5F008E622E7F5F009E5
+:10024000E7192230E11020E306E2F5F008E222E3AC
+:10025000F5F009E3192230E206E0F5F0A3E022E42C
+:1002600093F5F074019322BB0003740922BB0107CC
+:1002700089828A83740422BB020789828A8374106C
+:1002800022740A22020284BB0007E92582F8740165
+:1002900022BB010DE92582F582EA3583F5837404DA
+:1002A00022BB020DE92582F582EA3583F5837410BD
+:1002B00022E92582F87402220202B8BF0005EDF897
+:1002C000740122BF01078D828E83740422BF02074E
+:1002D0008D828E83741022EDF87402220202DCBF3C
+:1002E0000007ED2582F8740122BF010DED2582F58E
+:1002F00082EE3583F583740422BF020DED2582F56D
+:1003000082EE3583F583741022ED2582F874022283
+:10031000020310C0E0120264020328C0E01202B817
+:10032000020328C0E01202DC02032830E00B20E3C5
+:1003300004D0E0F622D0E0F72230E10B20E304D035
+:10034000E0F222D0E0F322D0E0F022C9CDC9CACE3B
+:10035000CACBCFCB12035BEDF9EEFAEFFB22BB0069
+:100360002FBF000AFAEDF8E7F60809DAFA22BF0112
+:10037000128D828E83F802037809A3E7F0D8FA225F
+:10038000020383FAEDF8E7F20809DAFA2202038D94
+:10039000BB014DBF001489828A83F9EDF802039FE7
+:1003A00008A3E0F6D9FA220203B0BF01228D828EA3
+:1003B00083FB08C9C582C9CAC583CAE0A3C9C5826F
+:1003C000C9CAC583CAF0A3DBEAD8E8220203D38DE9
+:1003D000828E83F9EDF8E0F208A3D9FA220203DD58
+:1003E000BB024DBF001289828A83F9EDF80203EF48
+:1003F00008A3E493F6D9F922BF01238D828E83FBF3
+:1004000008C9C582C9CAC583CAE493A3C9C582C93C
+:10041000CAC583CAF0A3DBE9D8E722020422898295
+:100420008A83F9EDF8E493F208A3D9F922020433A0
+:10043000BF000DFAEDF8E3F60809DAFA2202043DEE
+:10044000BF01128D828E83F802044A09A3E3F0D81B
+:10045000FA22020455FAEDF8E3F20809DAFA220268
+:10046000045FE6FB08E6FA08E6F904F618700106F0
+:1004700022E6FF08E6FE08E6FD22EFF0A3EEF0A379
+:10048000EDF022EBF0A3EAF0A3E9F022E0FFA3E015
+:10049000FEA3E0FD22E0FBA3E0FAA3E0F9220000C6
+:1004A00000000000000502006105710026059800AB
+:1004B000330A0900610A750066154400610CF900F1
+:1004C0006109A9006109E000610DC000610BF10044
+:1004D000610A1C00610A510061173C0033174F008C
+:1004E000341E1400431EBF0044202C0044201A0078
+:1004F000471EE600471F8B004D1FDC004F1F080002
+:100500005832A800617CCC7DFF121CC52290FFFCF4
+:10051000E020E72DC2AFAE59AF58755A20E55A1406
+:10052000C55A6019E4FE7F05EE4FCE24FFCECF34CE
+:10053000FFCF6007E490FF92F080ED80E08E598F4E
+:10054000582212050A7D077CB71232C47D0F7C6EDB
+:100550001232DE789D7A06E4F608DAFC7A06120595
+:10056000CD7C03120E55122168E4FEFF7C0F12327F
+:100570004DD2A822123138E490FC38F090FFF0E020
+:1005800030E408740190FC39F08005E490FC39F007
+:100590007D0A7C001225461231BB2212313890FCB4
+:1005A00039E014700E90FFF0E04410F07C0012254A
+:1005B000DF801990FC39E0700E90FFF0E054EFF00E
+:1005C0007C001225DF80057C171225DF1231BB224B
+:1005D00090FFF0E054ABF090FFF0E04420F0228C6C
+:1005E000378D367882EDF608ECF6EDFEECFD7F01F6
+:1005F0009000051201F57880F67882E6FD08E6FCA9
+:10060000EDFEECFD7F019000041201F5540FFC7D1E
+:100610008012176D7880E6700DAD3AAE39AF38E4D0
+:100620001203187C082290FFF0E054FEF090FFF0D7
+:10063000E054FDF0801E7882E6FD08E6FCEDFEEC5D
+:10064000FD7F0190000812021725E0440190FFF39E
+:10065000F00206D97882E6FD08E6FCEDFEECFD7FAF
+:100660000190000612021754FE90FFF3F0802B78E1
+:1006700082E6FD08E6FCEDFEECFD7F01900008122D
+:100680000217FAEB90FFF1F01208C8400DAD3AAE38
+:1006900039AF38E41203187C18227882E6FD08E6A8
+:1006A000FCEDFEECFD7F0190000812021790FFF1B7
+:1006B000F01208C8400DAD3AAE39AF38E412031855
+:1006C0007C18227882E6FD08E6FCEDFEECFD7F0159
+:1006D000900006120217440190FFF3F07883E6249D
+:1006E00003F618E63400F67880E624FE500990FF01
+:1006F000F0E054FDF0800790FFF0E04402F0E49059
+:10070000FFF1F0788176007880E624FFFCE434FF86
+:10071000FD7881E67F00FEECD39EEF6480CD64809F
+:100720009D402F1208AD400F7881E6AD3AAE39AF4B
+:10073000381203187C182290FFF2E0FC788286833E
+:10074000088682ECF0788106A37882A68308A682C8
+:1007500080B51208AD400F7881E6AD3AAE39AF38BA
+:100760001203187C182290FFF2E0FC78828683083E
+:100770008682ECF07880E6AD3AAE39AF38120318D5
+:100780007C00228C378D367882EDF608ECF6EDFE93
+:10079000ECFD7F019000051201F57881F67882E684
+:1007A000FD08E6FCEDFEECFD7F019000041201F572
+:1007B000540FFC7D8112176D7881E670037C08224E
+:1007C00090FFF0E054FEF090FFF0E054FDF0801B4D
+:1007D0007882E6FD08E6FCEDFEECFD7F0190000866
+:1007E00012021725E090FFF3F0805B7882E6FD08A7
+:1007F000E6FCEDFEECFD7F0190000612021754FEB0
+:1008000090FFF3F080217882E6FD08E6FCEDFEEC37
+:10081000FD7F01900008120217FAEB90FFF1F01231
+:1008200008C840037C18227882E6FD08E6FCEDFE4D
+:10083000ECFD7F0190000812021790FFF1F0120802
+:10084000C840037C18227883E6240AF618E63400B0
+:10085000F6788076007881E624FFFCE434FFFD78AA
+:1008600080E67F00FEECD39EEF6480CD64809D40E7
+:100870002178828683088682E090FFF1F01208C812
+:1008800040037C1822788006788306E618700106FB
+:1008900080C390FFF0E04401F0788286830886826E
+:1008A000E090FFF1F01208C840037C18227C00227F
+:1008B00090FFF0E020E71290FFF0E030E50990FFB4
+:1008C000F0E04420F0C32280E7D32290FFF0E02044
+:1008D000E31290FFF0E030E50990FFF0E04420F0F3
+:1008E000C32280E7D3228C428D417C00ED54F0FD81
+:1008F000EC7003ED64307005753E038003753E04B3
+:10090000AC3E120F72758300858340E541540FF5AC
+:100910003FE5407004E53F64037035E53E24FD7516
+:10092000F00AA42402F582E434FCF583E030E60505
+:100930001210598019E53E249DF8E654FBF678A97B
+:10094000E62405F58218E63400F583740FF080592B
+:10095000E5407004E53F64047048E53E24FD75F011
+:100960000AA42402F582E434FCF583E030E507AC08
+:1009700042AD41121C5AE54230E21578ADE630E056
+:100980000F78ADE630E109E4FF04FE7C0412324D3D
+:1009900078A9E62406F58218E63400F583740FF092
+:1009A0008007E4FC7DEE121C5AC203221231381279
+:1009B0000F7278A9E62406F58218E63400F583E084
+:1009C00090FC38F078A9E62405F58218E63400F5A5
+:1009D00083E090FC39F0C2037D027C0012254612B0
+:1009E00031BB221231387895ECF6EC249DF8E630D4
+:1009F000E1077C131225DF800F90FC39E0FD78952C
+:100A0000E6FC1213EF1225DF1231BB2212313878C7
+:100A100095ECF67D00120F121225DF1231BB221267
+:100A200031387895ECF6EC249DF8E630E2077C133B
+:100A30001225DF801B7895E6249DF8E620E1077CEF
+:100A4000121225DF800A7895E6FC1214131225DFB6
+:100A50001231BB221231387895ECF6EC249DF8E681
+:100A600020E2077C111225DF800A7895E6FC12153A
+:100A7000141225DF1231BB221231387895ECF612B0
+:100A80000F7278A9E62409F58218E63400F583E0B0
+:100A900090FC3FF078A9E6240AF58218E63400F5C8
+:100AA00083E090FC40F078A9E62403F58218E63450
+:100AB00000F583E0FC78A9E62404F58218E634000A
+:100AC000F583E0F56278A9E62402F58218E63400A1
+:100AD000F583E0F5638C61E4EC333354017895F6EB
+:100AE0006008E56230E1037895067895E690FC4170
+:100AF000F078A7E62402F58218E63400F583E0FDDD
+:100B0000A3E0540CFCED54E68C65F564E56130E53A
+:100B100003436501E56220E50EE561547F7008E559
+:100B20006120E703436502E56130E303436510E5B7
+:100B30006130E203436520E561540360034365408F
+:100B4000E56130E103436580E56130E4034364011E
+:100B5000E56130E603436408E56220E40EE5615494
+:100B60007F7008E56120E7034364105365FB53641D
+:100B7000F9AD64E56590FC3ACDF0A3CDF0E56330C6
+:100B8000E30DE5635430C4540F90FC3DF08005E460
+:100B900090FC3DF0E563540390FC3CF0E5635404A5
+:100BA000C31390FC3EF090FC3CE0700E7D357EFC63
+:100BB0007F01740190000912014B78A9E62408F521
+:100BC0008218E63400F583E07C00FD78A9E624076E
+:100BD000F58218E63400F583E07F004CFEEF4D907F
+:100BE000FC38F0A3CEF0CEC2037D0A7C001225466D
+:100BF0001231BB221231387895ECF6789A760108DA
+:100C000076FC0876387897760C789A12046E120281
+:100C10001D7898CBF6CB08F67F00EF24EA401FE45E
+:100C2000EF25E090357EFD93CD04937899667003AF
+:100C3000ED186670067897760080030F80DC789652
+:100C4000EFF6789A12046E9000021202177898CB91
+:100C5000F6CB08F65404CB54064B60047897760B19
+:100C60007899E630E313789A12046E900005120129
+:100C7000F524FB50047897760D7899E654C07D00F2
+:100C800064C04D70047897760B789A12046E9000C9
+:100C9000041201F524FC50047897760F789A120418
+:100CA0006E9000061201F524FD50047897760E78B8
+:100CB0009A12046E9000091201F524FD50047897F1
+:100CC000760A7897E6702A7895E6FC120F72789A81
+:100CD00012046E78A7E6F978A6E6FA7B01740A7822
+:100CE00000120348C2037895E6FC1211157897ECC0
+:100CF000F67897E6FC1225DF1231BB2212313878E4
+:100D000095ECF6120F727895E624FD75F00AA4248E
+:100D100014F582E434FCF583AC82AD8378A6868337
+:100D2000088682ECF9EDFA7B0A78011203B0C2035F
+:100D30007895E6FC1211151231BB228D2B8C2AED11
+:100D400060407527017529487528FFE52A24FDFCB8
+:100D5000E434FFFDEC7C0325E0CD33CDDCF9FCE58C
+:100D6000292CF529E5283DF528AD29AE28AF2774B3
+:100D7000809000061203207480900002120320125B
+:100D80000FC5E52B14603B7527017529087528FFF1
+:100D9000E52A24FDFCE434FFFDEC7C0325E0CD33A3
+:100DA000CDDCF9FCE5292CF529E5283DF528AD2910
+:100DB000AE28AF27E4900006120320E49000021250
+:100DC0000320221231387895ECF6EC249DF8E630B9
+:100DD000E2097895E6FC121514D2007895E6FC122B
+:100DE0000F727896760090FC39E030E704789676BA
+:100DF000017896E6FD7895E6FC120D38C2033000C6
+:100E0000077895E6FC1214137C001225DF1231BB23
+:100E10002278A9E62404F58218E63400F583E0443C
+:100E200001F078A9E62404F58218E63400F583E0A1
+:100E300030E00280ED78A9E6240BF58218E6340054
+:100E4000F583E054F8F078A9E62402F58218E63438
+:100E500000F583E04480F022C2038C58120F7278B0
+:100E6000A6868308868279AF7A357B0A78011203D9
+:100E7000FE120E0EAC587D02120D38C203AC581291
+:100E80001115228D538E528F518C50120F72754F47
+:100E90000078A9E62405F58218E63400F583E02001
+:100EA000E41FE54F24F64019054FC2037C181232A7
+:100EB000FB90FF93E04401F0B2B3AC50120F72808C
+:100EC000D078A9E62405F58218E63400F583E02001
+:100ED000E405C2037C022278A9E62405F58218E61F
+:100EE0003400F583E0540F601678A9E62405F582F6
+:100EF00018E63400F583E0540FF0C2037C01227839
+:100F0000A88683088682E0AD53AE52AF5112031813
+:100F1000C2037C00228D318C30121514E531600F34
+:100F2000E530B4030A7C0112250E7C8112250EAC3B
+:100F300030120F72E531601A78AA8683088682E043
+:100F400054E7F0A3A3A3A3E054E7F0AC307D021272
+:100F50000D3878A6868308868279B97A357B0A7837
+:100F6000011203FEC203E530249DF8E654FDF6AC01
+:100F700030121115228C2630030512329A80F87C2B
+:100F80000A1231ADD203E52624FD78A3F670077866
+:100F9000AA76FF0876E078A3E67D007C0425E0CD04
+:100FA00033CDDCF9FC24A078A9F6ED34FF18F678EF
+:100FB000A3E675F00AA42400FCE434FCFD78A6ED59
+:100FC000F608ECF61232462278A9E62402F58218D9
+:100FD000E63400F583E030E72278A9E62402F582C2
+:100FE00018E63400F583E0547FF078A9E62402F592
+:100FF0008218E63400F583E04480F02278AA8683E4
+:10100000088682E0547FF0AD83E5822404FCE43D51
+:101010008C82F583E0547FF078A9E6240BF58218E2
+:10102000E63400F583E054F8F078ABE62401F5826D
+:1010300018E63400F583E04403F078ABE62405F5C8
+:101040008218E63400F583E04403F078A9E624052D
+:10105000F58218E63400F583740FF02278AA8683AF
+:10106000088682E0543FF0AD83E5822404FCE43D31
+:101070008C82F583E0543FF078A3E624A4F8E6FCE4
+:1010800078ABE62401F58218E63400F583ECF078BD
+:10109000A3E624A4F8E6FC78ABE62405F58218E67E
+:1010A0003400F583ECF078A9E6240BF58218E634D9
+:1010B00000F583E054FB4402F52678A7E62402F508
+:1010C0008218E63400F583E030E50343260178A971
+:1010D000E62405F58218E63400F583E030E00312DB
+:1010E0000FC5E526FC78A9E6240BF58218E6340046
+:1010F000F583ECF078A9E62405F58218E63400F5CE
+:1011000083740FF078AA8683088682E04480F0A377
+:10111000A3A3A3E04480F0228C2A120F7278A7E6E2
+:101120002408F58218E63400F583E0FC78A9E6246B
+:101130000AF58218E63400F583ECF078A7E6240778
+:10114000F58218E63400F583E0FC78A9E62409F579
+:101150008218E63400F583ECF078A6868308868250
+:10116000E0FDA3E0FCEDFE78A9E62408F58218E690
+:101170003400F583EEF0ECFE78A9E62407F582183A
+:10118000E63400F583EEF08C298D28C3EC9405ED50
+:10119000940C400575277C8033D3E5299401E5281C
+:1011A0009403400575273C8023D3E5299481E528E5
+:1011B000940140057527188013D3E5299460E5282C
+:1011C0009400400575270C8003752708AF27E4EFCE
+:1011D000547C4483FF8F27E527FC78ABE62401F598
+:1011E0008218E63400F583ECF0E527FC78ABE624C2
+:1011F00005F58218E63400F583ECF0E527FC78A3CA
+:10120000E624A4F8ECF678A9E62402F58218E63480
+:1012100000F583E0F52778A7E62402F58218E63486
+:1012200000F583A3E030E3175327C778A7E624052A
+:10123000F58218E63400F583E09035AA93422778CA
+:10124000A7E62402F58218E63400F583E030E705CE
+:1012500043274080035327BF5327FB78A7E6240684
+:10126000F58218E63400F583E06003432704532732
+:10127000FC78A7E62404F58218E63400F583E04202
+:1012800027432780E527FC78A9E62402F58218E6A3
+:101290003400F583ECF078A9E62404F58218E634EE
+:1012A00000F583E0F52778A7E62402F58218E634F6
+:1012B00000F583A3E030E1055327DF8003432720B7
+:1012C00078A7E62402F58218E63400F583E030E4DE
+:1012D000055327EF800343271078A7E62409F582FA
+:1012E00018E63400F583E0B40203432702E527FC47
+:1012F00078A9E62404F58218E63400F583ECF0784A
+:10130000A9E62403F58218E63400F583E0F5277892
+:10131000A7E62409F58218E63400F583E07005534A
+:10132000277F800343278078A7E62402F58218E60A
+:101330003400F583A3E030E00543272080035327E2
+:10134000DF78A7E62402F58218E63400F583E03062
+:10135000E30543274080035327BF78A7E62402F51F
+:101360008218E63400F583E030E00543271080035F
+:101370005327EF78A7E62402F58218E63400F583B8
+:10138000A3E030E40543270880035327F778A7E656
+:101390002402F58218E63400F583A3E030E5054326
+:1013A000270480035327FB78A7E62402F58218E67A
+:1013B0003400F583A3E030E605432701800353277B
+:1013C000FE78A7E62402F58218E63400F583A3E050
+:1013D00030E70543270280035327FDE527FC78A962
+:1013E000E62403F58218E63400F583ECF0C2037CB2
+:1013F00000228D278C26ED54031460037C1022E517
+:1014000027547C24FC40037C0B22E526249DF8E62F
+:101410004402F67C00228C30120F72E530249DF8D5
+:10142000E620E24FAC307D02120D38E53024FE4458
+:1014300028FC78AA8683088682ECF0AF83E58224B4
+:1014400004FEE43FFFEC8E828F83F07C038C2CE55E
+:101450002CFC78ABE62401F58218E63400F583EC29
+:10146000F0E52CFC78ABE62405F58218E63400F5AF
+:1014700083ECF0752D01752F48752EFFE53024FDA6
+:10148000FCE434FFFDEC7C0325E0CD33CDDCF9FC3E
+:10149000E52F2CF52FE52E3DF52E78ABE62404F54F
+:1014A0008218E63400F583E054E7F52CAD2FAE2E1C
+:1014B000AF2DE4900002120320E4900006120320F6
+:1014C0001201EF30E503432C10E52CFC78ABE62449
+:1014D00004F58218E63400F583ECF012105978A96F
+:1014E000E62406F58218E63400F583E0C203FCE545
+:1014F00030249DF8E64404F68C2CE530540FC45497
+:10150000F07E00FFEEEF44047D00FFEC4EFCED4F5B
+:10151000FD121CC57C00228C2F120F72120FF9785D
+:10152000AA8683088682E05408F0A3A3A3A3E0540C
+:1015300008F0AC2F7D02120D38C203E52F249DF870
+:10154000E654FBF67C00221231387896ECF6EC2457
+:101550009DF8E630E10A7D007C131225461231BB6E
+:101560007896E6249DF8E64401F67896E6FC120F9C
+:10157000727896E624FD75F00AA42414F582E4340A
+:10158000FCF58378A6E6FA08E6F97B0A78011203EF
+:10159000B078A6868308868279B97A357B0A780185
+:1015A0001203FE120FC5C2037896E6FC12111578DD
+:1015B00095ECF6EC600A7D007C081225461231BBE2
+:1015C0007896E6FC120F7278A9E62404F58218E6F4
+:1015D0003400F583E0441054DFFC78A9E62404F5D8
+:1015E0008218E63400F583ECF07895ECF6C2037CC3
+:1015F000C81232FB7896E6FC120F7278A9E6240432
+:10160000F58218E63400F583E054EFF0C2037CC89D
+:101610001232FB7896E6FC120F7278A9E62404F5E4
+:101620008218E63400F583E04410F0C2037CC8124F
+:1016300032FB7896E6FC120F7278A9E62404F58254
+:1016400018E63400F583E04420F0C2037CF0123247
+:10165000FB7896E6FC120F7278A9E62405F582184D
+:10166000E63400F583E030E415C2037896E64410D2
+:101670007F00FE7C0712324D1231BB02173B78A966
+:10168000E62404F58218E63400F583E054CFF0C276
+:10169000037CC81232FB7896E6FC120F7278A9E63A
+:1016A0002404F58218E63400F583E04430F0C203E8
+:1016B0007CF01232FB7896E6FC120F7278A9E624D1
+:1016C00005F58218E63400F583E030E414C20378AF
+:1016D00096E644107F00FE7C0712324D1231BB802B
+:1016E0005D78A9E62404F58218E63400F583E05419
+:1016F000EFF078A9E62404F58218E63400F583E0DB
+:1017000054DFF07896E624FD75F00AA42414F582DF
+:10171000E434FCF583AC82AD8378A68683088682A8
+:10172000ECF9EDFA7B0A78011203B0C2037896E671
+:10173000FC1211157D007C0B1225461231BB2212C2
+:101740003138E490FC39F07D027C001225461231DC
+:10175000BB221231387C001225DF1231BB22743CCF
+:1017600090FBE0F0743E90FBE0F0E490FC28F02267
+:101770008D358C34ECB401028003D340028028B450
+:1017800002028003D34008A835E625E0F68018B4AD
+:1017900004028003D3400AA835E625E025E0F68060
+:1017A00006A83576008000228C3C8D3BEDFEECFDDA
+:1017B0007F0175660675670090FC29120477120197
+:1017C000EFB480028006D3500302186E90FC2912F9
+:1017D00004899000031201F554F0B430028003D361
+:1017E000405F90FC29120489900008120217FAFD4C
+:1017F000EBFE7F0190FC2C120477EECD9035C3FCFC
+:10180000E493FF740193FEF9EFFA7B01EAFFE9FE2E
+:10181000ECC39EED9F40259035C5E493FD74019384
+:10182000FCEDFEECFD7F01EECDFC90FC2EE0D39CA8
+:1018300090FC2DE09D5005756680803312198C80D8
+:101840002EB460028003D3400BAC3CAD3B1207804A
+:101850008C66801BB41003B34010C3B42003B340A4
+:1018600009C3B440028003D34000756681800080C4
+:1018700075B481028003D3406B90FC2912048990D7
+:1018800000031201F554F0B430028003D3401D90E0
+:10189000FC29120489900008120217FAFDEBFE7F62
+:1018A0000190FC2F1204771218F68036B460028083
+:1018B00003D34013753A67E4F539F538AC3CAD3BDA
+:1018C0001205DC8C66801BB41003B34010C3B42037
+:1018D00003B34009C3B440028003D340007566815E
+:1018E000800080028000E566FC90FC29120489ECEF
+:1018F000900002120320AC672290FC291204899008
+:1019000000041201F5600474018001E4A2E0920178
+:1019100090FC29120489ED2403FD50010E90FC2C4B
+:1019200012047790FC291204899000051201F5F544
+:10193000679000041201F5540FFC7D6712176DE5E6
+:10194000677004756608227566007884760078846E
+:10195000E6C39567503890FC2F1204891201EFFC02
+:1019600090FC2C120489EC12031830010E90FC310B
+:10197000E004F090FC307003E004F078840690FC02
+:101980002EE004F090FC2D7003E004F080C0229063
+:10199000FC2AE0FDA3E0FCEDFEECFD7F01ED240A56
+:1019A000FD50010E90FC3212047790FC291204893C
+:1019B0009000041201F5540FB401028003D34017C4
+:1019C00090FC321204890DED70010E90FC2F120470
+:1019D0007778887601804EB402028003D340199054
+:1019E000FC32120489ED2402FD50010E90FC2F12EE
+:1019F000047778887602802DB404028003D34019DE
+:101A000090FC32120489ED2404FD50010E90FC2F4D
+:101A100012047778887604800CB400028003D340E7
+:101A2000007566082290FC291204899000051201B5
+:101A3000F5F567788576007885E6C39567400302FB
+:101A40001AF4788676007886E6C378889650769081
+:101A5000FC2C1204891201EFFC90FC321204921249
+:101A600001E9F45CFC1201E9F890FC2F120489E80A
+:101A7000C0E01201EFC8D0E0C8584CFC90FC2C121A
+:101A80000489EC1203187887ECF690FC31E004F03E
+:101A900090FC307003E004F009E970010A90FC3218
+:101AA00012048090FC291204899000041201F53080
+:101AB000E40E90FC2EE004F090FC2D7003E004F0A6
+:101AC00078860680817888E6FDE4FEFFEECDFC9006
+:101AD000FC31E02CF090FC30E03DF07888E6FDE44D
+:101AE000FEFFEECDFC90FC34E02CF090FC33E03DAA
+:101AF000F0788506021A347566002222C0E0C0F034
+:101B0000C082C083C0D0E8C0E0E9C0E0EAC0E0EB3A
+:101B1000C0E0ECC0E0EDC0E0EEC0E0EFC0E090FF60
+:101B200092E01201C01B47301B47321B56381B681E
+:101B30003A1B7A3E1B92441B86461B9E501BE0526A
+:101B40001BBF541C015600001C2290FF92E07F0036
+:101B5000FE7C0112324D021C32E4FF04FE7C0312B3
+:101B6000324D742090FFFEF0021C32E4FF04FE7C34
+:101B70000212324D744090FFFEF0021C32E4FF046A
+:101B8000FE7C0412324D021C32E4FF04FE7C05127E
+:101B9000324D021C32E4FF04FE7C0612324D021C60
+:101BA0003290FFA5E07D0090FBF8CDF0A3CDF09042
+:101BB000FBF9E0FCF58390FBF8E04433FD121CC513
+:101BC000807390FFB5E07D0090FBFACDF0A3CDF0DF
+:101BD00090FBFBE0FCF58390FBFAE04443FD121C14
+:101BE000C5805290FFA6E07D0090FBFCCDF0A3CD18
+:101BF000F090FBFDE0FCF58390FBFCE04434FD122B
+:101C00001CC5803190FFB6E07D0090FBFECDF0A3B7
+:101C1000CDF090FBFFE0FCF58390FBFEE04444FD3B
+:101C2000121CC5801090FF92E07D00FCED44AAFDDF
+:101C3000121CC58000E490FF92F0D0E0FFD0E0FEDF
+:101C4000D0E0FDD0E0FCD0E0FBD0E0FAD0E0F9D06D
+:101C5000E0F8D0D0D083D082D0F0D0E0320581053A
+:101C60008105810581A881181818EDF608ECF69019
+:101C7000FF5AE020E70280F790FF59E07D00A8813D
+:101C800018CDF6CD08F67D03A881E618FCE6CC2534
+:101C9000E0CC33CCDDF9CCF6CC08F6A88118E644CC
+:101CA000F8F6A881181818E6FD08E6FCA881188641
+:101CB00083088682EDF0A3ECF0740290FF5AF015D1
+:101CC0008115811581158122E5812405F581E4A81E
+:101CD0008118F6A88118181818EDF608ECF690FB94
+:101CE000F5E024F85003021DE6E4A8811818F6A8D0
+:101CF0008118E6FEA88118181818E6FD08E6FC7F92
+:101D000000EF24F8404DE4EF25E0247DF582E43433
+:101D1000FCF583E0FBA3E06C7003FAEB6D700974D3
+:101D200001A8811818F6802BE4EF25E0247DF582C8
+:101D3000E434FCF5837A00E054F0CCF8CCCDF9CD56
+:101D4000FB7800E954F0F9EA687002EB6970010E63
+:101D50000F80AEA88118EEF6A88118181818EDF6B5
+:101D600008ECF6A881EFF6A8811818E67079A8812A
+:101D700018E624F74071A88118181818E6540FA81F
+:101D800081F664046017A881E664036010A88118D6
+:101D9000181818E6FD08E6FC121C5A804A7C0A1244
+:101DA00031ADA88118181818E6FD08E6FC90FBF480
+:101DB000E025E0247DF582E434FCF583EDF0A3EC2E
+:101DC000F090FBF4E0FFE4EF045407FF90FBF4F025
+:101DD00090FBF5E004F012324690FBF6E07008E468
+:101DE000FEFF7C0F12324D802790FBF7E004F05489
+:101DF0003F701D90FBF7E044FE7D00FC90FBF4E09B
+:101E000025E0247DF582E434FCF583EDF0A3ECF0CD
+:101E1000E58124FBF58122788B7600788C7600743E
+:101E20000190FBF6F012313890FBF5E060577C0A28
+:101E30001231AD90FBF3E025E0247DF582E434FC23
+:101E4000F583E0FDA3E0FC90FBF3E025E0247DF5C5
+:101E500082E434FCF583E4F0A3F090FBF3E0FFE4CC
+:101E6000EF045407FF90FBF3F090FBF5E014F078DB
+:101E700089EDF608ECF61232467889E6FD08E6FCB4
+:101E80001208E380A312329A90FF93E04401F0B26B
+:101E9000B3788B06B60011788B7600788CE6F40464
+:101EA00004A2E092B4788CF6021E25E490FBF6F0D2
+:101EB00090FBF5E07D00FCED44CFFD121C5A123181
+:101EC000BB22123138E5706449456F601590FF837D
+:101ED000E0540F7D00D39570ED956F5005122F8162
+:101EE00080031230511231BB22123138E57064493F
+:101EF000456F600512308B800E90FF80E04408F043
+:101F000090FF83E0547FF01231BB221231388C54A1
+:101F1000EC54F0B41015756A357569FC756801E507
+:101F20006A2403F56AE5693400F569E4F557F55666
+:101F3000E556C394015027E554540FFCAD6AAE69D1
+:101F4000AF68120E808C55EC60028012056AE56A5B
+:101F5000700205690557E5577002055680D2E554B1
+:101F6000540F249DF8E654FEF6E554540F7F00FE0E
+:101F70007C1212324DE5551470097D007C09122542
+:101F8000468007AD577C001225461231BB22123124
+:101F90003890FFFCE04402F090FF00E030E713903F
+:101FA000FF83E04480F0436D8090FFFCE04401F04B
+:101FB000801190FF82E04408F0536D7F90FFFCE0B9
+:101FC00054FEF090FF81E04480F01225F990FFFE6E
+:101FD000E04405F090FFFCE054FDF01231BB22120A
+:101FE00031387C011232FB78ADE64402F674FEFC17
+:101FF00004FD121CC590FF5AE030E70280F7E4F5BB
+:102000004E754D10AC4EAD4DE54E154E7002154D52
+:10201000EC4D600280EE4387011231BB2212313851
+:102020007C021231C778ADE654FDF61231BB2212A4
+:10203000313878ADE630E02C78ADE630E12678AD89
+:10204000E6FCF58318E644F0FD121C5A90FFFCE014
+:102050004420F07C021232FB78ADE654FDF6741A8F
+:1020600090FFFEF078ADE6FCF58318E644F1FD1232
+:102070001C5A1231BB22756D0090FFFFE0600343D4
+:102080006D01756E00E4F56CF56BE4F56F757049E4
+:10209000748490FF82F0748490FF80F0748090FFCD
+:1020A00058F0748090FF5AF0AD46AF457E00EE24A4
+:1020B000FE5003022142E4EE75F007A4247FF5826E
+:1020C000E434F8F583E0FFE4EF5480FDE4EF540FCF
+:1020D00014FFED6038E4EF75F008A42448F582E4BD
+:1020E00034FFF5837490F0E4EF75F008A4244AF50A
+:1020F00082E434FFF5837480F0E4EF75F008A424E3
+:102100004EF582E434FFF5837480F08034E4EF759B
+:10211000F008A42408F582E434FFF5837490F0E419
+:10212000EF75F008A4240AF582E434FFF583E4F0A7
+:10213000E4EF75F008A4240EF582E434FFF583E49F
+:10214000F00E0220AB8D468E448F45747F90FFFDCC
+:10215000F0749090FFFCF0228C58EC24F65006E5C9
+:10216000582437FC22E5582430FC22D2B0122543F3
+:10217000EC700302227E755C03AE5B7F00E55C15AC
+:102180005C6480247F5035EF2400F582E434FBF555
+:1021900083E0FE24FE501EEF7D00FCE4FB7474C35C
+:1021A0009CFAEB9DFBEE7D00FCEAC39CED6480CBCA
+:1021B00064809B50028005EF2EFF80C18E5B8F5A9A
+:1021C000E55C6480247F500302227EE55A248E5011
+:1021D0000302227E855A5D755B00AE5AAF5B903577
+:1021E000EEE493F55CE55C155C6480247F5018EEAA
+:1021F0002400F582E434FBF583E0FCEF9035EE93A8
+:102200006C70040E0F80DE8E5A8F5BE55C64802458
+:102210007F406E755E017560E8755FFFE55D2402C5
+:10222000F55A755C07E55C334057AD60AE5FAF5E55
+:10223000E55CF5823395E0F5831201F5C4540FFC9B
+:10224000122155E55A2400F582E434FBF583ECF0C5
+:10225000055A055AAD60AE5FAF5EE55CF582339519
+:10226000E0F5831201F5540FFC122155E55A2400C4
+:10227000F582E434FBF583ECF0055A055A155C80D1
+:10228000A4740290F851F090F86B79C77A357B27E7
+:1022900078011203FE756A357569FC756801E49072
+:1022A000FF83F0748090FF81F0755902E55975F055
+:1022B00007A4247FF582E434F8F583E0788FF6FCF8
+:1022C000540F14FC788FECF6E55975F007A42481BF
+:1022D000F582E434F8F583E0789276FD0876E8FC40
+:1022E000788FE675F008A42448F582E434FFF5837E
+:1022F000E4F0788FE675F008A4244FF582E434FF0B
+:10230000F583ECF07892E6FF08E67E03CFC313CFA7
+:1023100013DEF9FE788FE675F008A42449F582E40F
+:1023200034FFF583EEF0788FE675F008A4244AF5C3
+:1023300082E434FFF5837480F07890ECF67D0078C9
+:1023400093E62CF618E63DF67892E6FD08E67C0367
+:10235000CDC313CD13DCF9FC788FE675F008A42407
+:102360004DF582E434FFF583ECF0788FE675F008E4
+:10237000A4244EF582E434FFF583E4F07892E6FD80
+:1023800008E6FC788FE6FF7E00EE24FE5003022470
+:10239000FDE4EE75F007A4247FF582E434F8F583BC
+:1023A000E0FFE4EF5480FAE4EF540F14FFE4EE751D
+:1023B000F007A42481F582E434F8F583E07890F600
+:1023C000E4EE1313548024F0F8E434FDF9E8FCE95A
+:1023D000FD8A5AEA700302246AE4EF75F008A42427
+:1023E00048F582E434FFF583E4F07890E6FAE4EF10
+:1023F00075F008A4244FF582E434FFF583EAF0ED8C
+:10240000FBEC7A03CBC313CB13DAF9FAE4EF75F0E4
+:1024100008A42449F582E434FFF583EAF07890E6D5
+:102420007B00FAEC2AFCED3BFDFBEC7A03CBC313FB
+:10243000CB13DAF9FAE4EF75F008A4244DF582E441
+:1024400034FFF583EAF0E4EF75F008A4244AF5823E
+:10245000E434FFF5837480F0E4EF75F008A4244EB3
+:10246000F582E434FFF5837480F00224F9E4EF751B
+:10247000F008A42408F582E434FFF583E4F07890B2
+:10248000E6FAE4EF75F008A4240FF582E434FFF5D2
+:1024900083EAF0EDFBEC7A03CBC313CB13DAF9FA42
+:1024A000E4EF75F008A42409F582E434FFF583EA2B
+:1024B000F07890E67B00FAEC2AFCED3BFDFBEC7A31
+:1024C00003CBC313CB13DAF9FAE4EF75F008A424B5
+:1024D0000DF582E434FFF583EAF0E4EF75F008A42B
+:1024E000240AF582E434FFF583E4F0E4EF75F008A4
+:1024F000A4240EF582E434FFF583E4F00E02238673
+:102500008E597892EDF608ECF6788FEFF61220737C
+:10251000228C26EC30E718E526540F1475F008A439
+:102520002448F582E434FFF583E054DFF08016E5BB
+:1025300026540F1475F008A42408F582E434FFF53E
+:1025400083E054DFF0227C0022EC90FC37F08C24F6
+:10255000ED2403F5257D00D39572ED95714003853B
+:102560007225E52524B75009752503740290FC37C0
+:10257000F0AC2512307622E4F56CF56B12257D2245
+:1025800090FC35E06573600E740490FC37F0E4F560
+:102590006B756C0380467D73E4FEFF79357AFC7BB6
+:1025A0000174057800120348E56C2403F56CE56BB3
+:1025B0003400F56BE56CD39572E56B95714006853B
+:1025C000726C85716BD3E56C9448E56B9400400C9C
+:1025D000740290FC37F0E4F56B756C03AC6C123050
+:1025E0007622EC90FC37F0E4F56CF56B8C32EC6005
+:1025F0000512306780057C001230762290FF93E050
+:102600004401F0B2B390FF04E0F54A90FF06E0FD0C
+:10261000A3E0ED7D00FC7D00FC90FF06E0FFA3E061
+:102620007E00FFE4FEEC4EFCED4FFDC3EC9448ED64
+:102630009400502290FF06E0FDA3E0ED7D00FC7DBC
+:1026400000FC90FF06E0FFA3E07E00FFE4FEEC4EFE
+:10265000FCED4FFD8004E4FD7C488C728D7190FF91
+:1026600002E0FDA3E0ED7D00FC7D00FC90FF02E0B8
+:10267000FFA3E07E00FFE4FEEC4EF54CED4FF54B82
+:10268000756A357569FC7568017D357EFC7F017959
+:1026900073E4FAFB74057800120348754900E549B4
+:1026A00024FE4019AD6AAE69AF68E412031805490B
+:1026B0000DED70010E8D6A8E698F6880E1756A3547
+:1026C0007569FC75680190FF00E05460B4000280F9
+:1026D00006D35003022CBFE54A540FF549E54A548E
+:1026E00080A2E0920290FF01E012018A000B2CBA56
+:1026F000270528232CBA292F2CBA2A122A462BADBB
+:102700002BB02BF02C632C91E56D30E70EE54C459A
+:102710004B7008E572640245716003022CBC90FFA7
+:1027200000E0541FB400028003D34029E54A60034F
+:10273000022820AD6AAE69AF68740112031878AD43
+:10274000E630E00BAD6AAE69AF6874021203187C24
+:102750000212307622B401028003D3401BE56D20C3
+:10276000E107E54A6003022820E54A24FE500302FF
+:1027700028207C0212307622B402028006D3500355
+:1027800002281EE56D20E10DE54A6009E54A6480F6
+:102790006003022820AC4A1230FD4003022820E5E5
+:1027A00049702530021190FF80E05408AD6AAE698F
+:1027B000AF68120318800F90FF82E05408AD6AAE34
+:1027C00069AF68120318803D154930021DE549754F
+:1027D000F008A42448F582E434FFF583E05408AD02
+:1027E0006AAE69AF68120318801BE54975F008A44A
+:1027F0002408F582E434FFF583E05408AD6AAE693D
+:10280000AF68120318AD6AAE69AF681201EF600BD2
+:10281000AD6AAE69AF6874011203187C021230769B
+:10282000228000022CBCE56D20E706E57245716050
+:1028300003022CBC90FF00E0541FB400028003D3BD
+:10284000401AE54C14454B7004E54A600302292CFC
+:1028500078ADE654FEF67C0012307622B401028098
+:1028600003D3402AE56D20E108E56D20E00302294D
+:102870002CE56D30E004E54A700BE56D30E109E5CB
+:102880004A24FE500302292C7C0012307622B40226
+:10289000028006D3500302292AE54C454B6003020F
+:1028A000292CAC4A1230FD400302292CE56D20E1B1
+:1028B00007E56D20E0028077E56D30E006E54960D0
+:1028C00002806CE549700F90FF82E054F7F090FFB2
+:1028D00080E054F7F022E549B401028003D34009B7
+:1028E0007D017C03120F128011B402028003D340D9
+:1028F000097D017C04120F1280001549300215E594
+:102900004975F008A42448F582E434FFF583E054C7
+:10291000F7F08013E54975F008A42408F582E43443
+:10292000FFF583E054F7F07C00123076228000023D
+:102930002CBCE56D20E706E57245716003022CBCF6
+:1029400090FF00E0541FB400028003D3401AE54C0E
+:1029500014454B7004E54A6003022A0F78ADE64443
+:1029600001F67C0012307622B401028003D34029A4
+:10297000E56D20E108E56D20E003022A0FE56D30EA
+:10298000E004E549700BE56D30E108E54924FE50AF
+:1029900002807F7C0012307622B402028003D34092
+:1029A0006FE54C454B60028069AC4A1230FD400235
+:1029B0008060E56D20E107E56D20E0028054E54987
+:1029C000701430020990FF80E04408F0800790FF07
+:1029D00082E04408F022E56D30E1331549300215FC
+:1029E000E54975F008A42448F582E434FFF583E056
+:1029F0004408F08013E54975F008A42408F582E442
+:102A000034FFF583E04408F07C0012307622800227
+:102A10008000022CBCE56D20E712E5724571700C58
+:102A2000E54A700890FF00E0541F6003022CBCE5EB
+:102A30004C90FFFFF090FFFFE06005436D018003C5
+:102A4000536DFE7C0012307622E56D30E70EE572A4
+:102A50004571600890FF00E0541F6003022CBCAD7C
+:102A60004BE54CED7D00FC7D00FCBD0002800302C7
+:102A70002BA8B401028003D34032E54A7005E54C2F
+:102A8000FC6003022BAA756A407569F8756801D36A
+:102A9000E5729412E57194004006E4FD7C12800416
+:102AA000AC72AD718C708D6F12308B22B4020280CB
+:102AB00003D34059E54A6003022BAAE54CFC70277A
+:102AC000756A527569F8756801D3E5729419E571F4
+:102AD00094004006E4FD7C198004AC72AD718C70EA
+:102AE0008D6F12308B8025756A6B7569F87568017A
+:102AF000D3E5729427E57194004006E4FD7C2780BD
+:102B000004AC72AD718C708D6F12308B22B40302E5
+:102B10008006D35003022BA8E54CF549700F90FFB7
+:102B200004E0FDA3E04D6003022BAA801890FB0295
+:102B3000E0FDA3E0FC90FF05E06C700790FF04E06F
+:102B40006D60028068E4F570F56F7F00E54914C59B
+:102B500049600FEF2400F582E434FBF583E02FFF9A
+:102B600080EA8F4AE54A2400F582E434FBF583E0ED
+:102B70007D00D39572ED95714006AC72AD71800FFA
+:102B8000E54A2400F582E434FBF583E07D00FC8C0B
+:102B9000708D6FE54A2400FCE434FBFDFEECFD7F04
+:102BA000018D6A8E698F6812308B228000022CBCE6
+:102BB000022CBCE56D30E719E5721445717012E521
+:102BC0004A700EE54C454B700890FF00E0541F60C2
+:102BD00003022CBCE56D20E008E56D20E103022C2A
+:102BE000BC756A6EE4F569F568E4F56F04F570127A
+:102BF000308B22E56D20E727E57245717021E54AAB
+:102C0000701DE54C6402454B600DE54C14454B606E
+:102C100006E54C454B700890FF00E0541F6003022E
+:102C20002CBCE56D20E008E56D20E103022CBC859D
+:102C30004C6EE56E700A436D01536DFDD2B080207D
+:102C4000E56E64026007E56E1460028072536DFEEB
+:102C5000436D02E56E64026005E56E147002C2B059
+:102C60007C0012307622E56D30E71AE5721445716A
+:102C70007013E54A700FE54C454B700990FF00E07A
+:102C8000541F1460028038E56D20E10280317C0120
+:102C900012307622E56D20E715E5724571700FE57B
+:102CA0004C454B700990FF00E0541F146002800FE8
+:102CB000E56D20E10280087C00123076228000025F
+:102CC0002F7DB440028006D35003022F7390FF0182
+:102CD000E090FC35F0E54A90FC36F0E490FC37F0EB
+:102CE000E56A2403F56AE5693400F569AD4BE54C06
+:102CF000856A82856983CDF0A3CDF090FF01E01253
+:102D000001C02D2A012D50022D7A032DA4042DF28D
+:102D1000052E2F062E55072E7B082EA7092ECD0B2C
+:102D20002EF30C2F02802F028100002F60E56D2012
+:102D3000E7067C051225DF227D767E357F02793815
+:102D40007AFC7B01740878001203487D087C00122D
+:102D5000254622E56D20E7067C051225DF22E54A9F
+:102D6000B403004010B40500500BE54A7F00FE7C20
+:102D70001012324D227D007C0712254622E56D207F
+:102D8000E7067C051225DF22E54AB403004010B4B3
+:102D90000500500BE54A7F00FE7C1112324D227D6A
+:102DA000007C0712254622E56D20E7067C051225EA
+:102DB000DF22E54AB405028003D3400AE4FF04FEA3
+:102DC0007C0A12324D22B401028003D3400AE4FF90
+:102DD00004FE7C0812324D22B403004010B40500FA
+:102DE000500BE54A7F00FE7C1312324D227D007CA1
+:102DF0000712254622E56D20E734D3E5729448E5B5
+:102E00007194005006E572457170067C021225DF50
+:102E100022E54AB40103B3400BC3B403004009B434
+:102E200006005004123123227C071225DF221225CE
+:102E30007D22E56D20E71DE54AB403004010B4058E
+:102E400000500BE54A7F00FE7C1612324D227C07B3
+:102E50001225DF2212257D22E56D20E71DE54AB40B
+:102E600003004010B40500500BE54A7F00FE7C19BA
+:102E700012324D227C071225DF2212257D22E56DBC
+:102E800020E723748190FF93F0E54AB403004010DB
+:102E9000B40500500BE54A7F00FE7C1712324D222C
+:102EA0007C071225DF2212257D22E56D20E71DE536
+:102EB0004AB403004010B40500500BE54A7F00FE01
+:102EC0007C1812324D227C071225DF2212257D222A
+:102ED000E56D20E71DE54AB403004010B40500503D
+:102EE0000BE54A7F00FE7C1512324D227C0712252D
+:102EF000DF2212257D22E56D20E7067C071225DF03
+:102F00002212257D22E56D30E72090FF00E0541F5E
+:102F1000701090FF01E0B480051225748003122523
+:102F20007D227D007C051225462290FF00E0541F83
+:102F300060067C051225DF22D3E5729448E5719482
+:102F400000500BC3E5729407E571940050067C03B2
+:102F50001225DF22E54AB40504123123227C071230
+:102F600025DF22E56D30E7087D007C05122546222D
+:102F70007C051225DF22B420028003D340008000AC
+:102F80001230512275430090FF83E0540FD39543D4
+:102F90004024E54324F0F582E434FEF583E0AD6A95
+:102FA000AE69AF6812031805430DED70010E8D6A0E
+:102FB0008E698F6880D1E5437D00FCC3E5709CF588
+:102FC00070E56F9DF56FE570456F6006E490FF83D7
+:102FD000F02290FF82E04408F0E4F56F75704990AC
+:102FE000FC35E0B405028003D3404090FC36E0F5A8
+:102FF00043B405028003D3400AE4FF04FE7C0B12B5
+:10300000324D22B401028003D3400AE4FF04FE7C67
+:103010000912324D22B403004010B40500500BE5F4
+:10302000437F00FE7C1412324D2222B480004023E4
+:10303000B48200501E7C357DFC1217A57D008C6C7F
+:103040008D6B90FC37E0600512305180057C0012DA
+:103050003076222290FF83E0547FF090FF82E0449C
+:1030600008F090FF80E04408F02290FF82E04408DE
+:10307000F090FF80E04408F0228C237D008C708D5E
+:103080006F756A357569FC75680112308B2290FF87
+:1030900083E0547FF0E5706449456F700122C3E519
+:1030A000709408E56F94004015752108E5217D00B6
+:1030B000FCC3E5709CF570E56F9DF56F8009857028
+:1030C00021E4F56F757049752200E522C395215002
+:1030D00026AD6AAE69AF681201EFFCE52224F8F56F
+:1030E00082E434FEF583ECF005220DED70010E8DC7
+:1030F0006A8E698F6880D3E521547F90FF81F0222A
+:103100008C487F00EF24FD4019E4EF75F007A424FC
+:103110007FF582E434F8F583E065487002D3220F2E
+:1031200080E28F47C32285727085716F90FF82E0C5
+:1031300054F7F090FF83E0547FF022C000C001C03C
+:1031400002C006C007E5782408F8860653067F7C8F
+:10315000FF1231AD7C007D00E57B6046FF90FD9560
+:10316000E0547F6E700FC083C082A3E0FDA3E0FC3B
+:10317000A3157B8007A3A3A3DFE68026DF06D0820A
+:10318000D083801EE0F8A3E0F9A3E0FAD082D083D8
+:10319000E8F0A3E9F0A3EAF0A3C083C082A3A3A34D
+:1031A00080DA123246D007D006D002D001D00022F9
+:1031B00085A87A75A888EC70027C3F8C7922E57826
+:1031C0002408F8760012329A80FBC000C001C002C9
+:1031D000C006C007AE047CFF1231ADE57B6042FF44
+:1031E00090FD95E0547F6E700BC083C082A3A3A3B3
+:1031F000157B8007A3A3A3DFEA8026DF06D082D059
+:103200008380D8E0F8A3E0F9A3E0FAD082D083E885
+:10321000F0A3E9F0A3EAF0A3C083C082A3A3A38034
+:10322000DA7808087918097C01E6547F6E70067612
+:10323000007700800608090CBC08EE123246D00761
+:10324000D006D002D001D00022757900857AA8225C
+:10325000C0F0C082C083C3E57B24E8500512329AD7
+:1032600080F4EC6031903575E493C39C4028C00431
+:103270007CFF1231ADD004430480E57B75F003A4DC
+:103280002495F582E434FDF583ECF0EFA3F0EEA392
+:10329000F0057B123246D083D082D0F022C0047C6D
+:1032A00020D28CD28DD504FDD0042275A80075885B
+:1032B0000075B80075F00075D000E4F8900000F6D5
+:1032C00008B800FB020000C3ED940250047D037CAB
+:1032D000E8ECF4FCEDF4FD0CBC00010D8C7F8D7E60
+:1032E00022C3EC94BCED940250047D077CD0ECF436
+:1032F000FCEDF4FD0CBC00010D8C7D8D7C22EC708E
+:103300000122C000E5782418F8A604E5782408F81E
+:10331000C6547FF6E630E703D0002212329A80F4DA
+:10332000C28C857C8C857D8AD28CC0E0C0D0C0F0F8
+:10333000C082C083C000C001C002C003C004C00579
+:10334000C006C007121AF8E5782408F8E66024E5FC
+:10335000782410F8A681E57875F021A4248DF582F3
+:10336000E434FCF58378AEE58104C398F9E6F0080F
+:10337000A3D9FA74082578F8057808E65480700C0B
+:10338000E578B407F3780875780080EFE5782410C5
+:10339000F88681E57875F021A4248DF582E434FC6B
+:1033A000F58378AEE58104C398F9E0F608A3D9FA6D
+:1033B000D007D006D005D004D003D002D001D00071
+:1033C000D083D082D0F0D0D0D0E032C0E0C0D0C026
+:1033D00000C001C002C28E857E8D857F8BD28E7823
+:1033E0001979097A07E77004A600800BE6600816D1
+:1033F000E67004E74480F70809DAEAE57960131417
+:10340000F579700EE5782408F87600123246D28CF1
+:10341000D28DD002D001D000D0D0D0E0327581ADB5
+:10342000742A90FF93F0757F30757EF8757D607516
+:103430007CF012053F1234CE12175B90FF93E044EC
+:1034400001F0B2B31234F81232A880DA22C0007C44
+:1034500001EC2408F8E660090CBC08F512329A80E9
+:10346000EED00022C0F0C082C083C000C006C007FA
+:10347000ED2410F876BCED75F021A4248DF582E4DE
+:1034800034FCF583C082C083A3A3E4780DF0A3D8F5
+:10349000FCEC547F75F002A42441F582E5F034354C
+:1034A000F583E493FE740193F5828E83E493FE74B6
+:1034B0000193FFD083D082EFF0A3EEF0ED2408F863
+:1034C000EC4480F6D007D006D000D083D082D0F074
+:1034D00022757800757B007A08791878087600776D
+:1034E000000809DAF8E478087480447FF67401442F
+:1034F00010F58975B808D2ABD2A9227581ADD28EEC
+:10350000D28CD2AFE57B6032FF90FD95E0548060B5
+:103510002478087908E0547FFA7B00E6547FB502EE
+:10352000027BFF08D9F5EB700CEAF012344AAD04C7
+:10353000AC02123461A3A3A3DFD212329A80C57CFD
+:10354000017D002204FE04F204F604EA04E604E22B
+:1035500004EE04FA04A604AA04D604DA04A204A21F
+:1035600004A204DE04BE04B604BA04B204CA04C64B
+:1035700004C204CE04D204AE1901030022004802A2
+:1035800000480E301420C81AD0180A0C0506020391
+:1035900001020001CE0181010000C0008000600036
+:1035A0003000180010000800040002000100081894
+:1035B00028380C05100A0200000000000301100A60
+:1035C000020000000000FBE0FBF2090227000102FC
+:1035D00000A0FA0904000003FF00000007058102B3
+:1035E00040000007050102400000070583030200B8
+:1035F00001220354005500530042003300340031CF
+:1036000000300020002000200020002000200020AA
+:073610000020000000000093
+:00000001FF
diff --git a/firmware/mts_edge.fw.ihex b/firmware/mts_edge.fw.ihex
new file mode 100644
index 00000000000..d14ebd64784
--- /dev/null
+++ b/firmware/mts_edge.fw.ihex
@@ -0,0 +1,881 @@
+:10000000F0360002001E021AFBFFFFFFFFFF023363
+:10001000F9FFFFFFFFFFFFFFFFFFFFFFFFFF0234BE
+:10002000A47581D490FDE88583A0123618EC4D604C
+:100030007378AF8003760018B8A0FA787F800376D3
+:100040000018B865FA78208003760018B820FA788E
+:10005000208003760018B81FFA90FDDDAE83AF82D2
+:1000600090FBF81200AA6005E4F0A380F690FDE88A
+:10007000A88290FDE8A982E8696005E4F20880F7AB
+:100080009001081200B390010C1200B390011012FD
+:1000900000B39001141200D190011A1200D1900106
+:1000A000201200D175D0001234F6020126EF6582CD
+:1000B0007003EE658322E493F8740193F97402935C
+:1000C000FE740393F5828E83E869700122E493F64F
+:1000D000A30880F4E493FC740193FD740293FE740E
+:1000E0000393FF740493F8740593F58288831200D8
+:1000F000AA700122E493A3A883A9828C838D82F045
+:10010000A3AC83AD828883898280E32121049B8014
+:1001100080049BB0B4049BFDE8049F049FFBF304A0
+:10012000A4049FFBF30504050480FED0F030F00921
+:1001300020F303F68010F7800D30F10920F303F26D
+:100140008004F38001F020F404FCD0E0CC22CCC089
+:10015000E0120163020154BC0005D0F0ACF022C3F0
+:1001600013DCFC02012ABF0009ED258275F001F8BD
+:10017000E622BF010FED2582F582EE3583F583750A
+:10018000F004E022ED258275F002F8E222D083D05F
+:1001900082F5F0C3E493A3C5F095F0C0E0C3D0F0BE
+:1001A000E493A395F04012A3A3C3E5F033500205F6
+:1001B000832582F58250020583740193C0E0E493A5
+:1001C000C0E022D083D082F5F0E4937009740193EB
+:1001D0007004A3A3800C74029365F06005A3A3A32D
+:1001E00080E7740193C0E0E493C0E022120264024D
+:1001F00001FB1202B80201FB1202DC0201FB30E03B
+:100200000720E302E622E72230E10720E302E222B0
+:10021000E32230E202E022E493221202DC02022313
+:100220001202B8020223ABF012022DCBC5F0CB2292
+:1002300030E01020E306E6F5F008E622E7F5F009E5
+:10024000E7192230E11020E306E2F5F008E222E3AC
+:10025000F5F009E3192230E206E0F5F0A3E022E42C
+:1002600093F5F074019322BB0003740922BB0107CC
+:1002700089828A83740422BB020789828A8374106C
+:1002800022740A22020284BB0007E92582F8740165
+:1002900022BB010DE92582F582EA3583F5837404DA
+:1002A00022BB020DE92582F582EA3583F5837410BD
+:1002B00022E92582F87402220202B8BF0005EDF897
+:1002C000740122BF01078D828E83740422BF02074E
+:1002D0008D828E83741022EDF87402220202DCBF3C
+:1002E0000007ED2582F8740122BF010DED2582F58E
+:1002F00082EE3583F583740422BF020DED2582F56D
+:1003000082EE3583F583741022ED2582F874022283
+:10031000020310C0E0120264020328C0E01202B817
+:10032000020328C0E01202DC02032830E00B20E3C5
+:1003300004D0E0F622D0E0F72230E10B20E304D035
+:10034000E0F222D0E0F322D0E0F022C9CDC9CACE3B
+:10035000CACBCFCB12035BEDF9EEFAEFFB22BB0069
+:100360002FBF000AFAEDF8E7F60809DAFA22BF0112
+:10037000128D828E83F802037809A3E7F0D8FA225F
+:10038000020383FAEDF8E7F20809DAFA2202038D94
+:10039000BB014DBF001489828A83F9EDF802039FE7
+:1003A00008A3E0F6D9FA220203B0BF01228D828EA3
+:1003B00083FB08C9C582C9CAC583CAE0A3C9C5826F
+:1003C000C9CAC583CAF0A3DBEAD8E8220203D38DE9
+:1003D000828E83F9EDF8E0F208A3D9FA220203DD58
+:1003E000BB024DBF001289828A83F9EDF80203EF48
+:1003F00008A3E493F6D9F922BF01238D828E83FBF3
+:1004000008C9C582C9CAC583CAE493A3C9C582C93C
+:10041000CAC583CAF0A3DBE9D8E722020422898295
+:100420008A83F9EDF8E493F208A3D9F922020433A0
+:10043000BF000DFAEDF8E3F60809DAFA2202043DEE
+:10044000BF01128D828E83F802044A09A3E3F0D81B
+:10045000FA22020455FAEDF8E3F20809DAFA220268
+:10046000045FE6FB08E6FA08E6F904F618700106F0
+:1004700022E6FF08E6FE08E6FD22EFF0A3EEF0A379
+:10048000EDF022EBF0A3EAF0A3E9F022E0FFA3E015
+:10049000FEA3E0FD22E0FBA3E0FAA3E0F9220000C6
+:1004A000000000000000000504006105730026053F
+:1004B0009A00330A0B00610A770066154600610C4A
+:1004C000FB006109AB006109E200610DC200610B34
+:1004D000F300610A1E00610A530061173E003317E2
+:1004E0005100341E1600431EBC0044202900442045
+:1004F0001700471EE300471F88004D1FD9004F1FFC
+:10050000050058338400617CCC7DFF121CC722900B
+:10051000FFFCE020E72DC2AFAE59AF58755A20E579
+:100520005A14C55A6019E4FE7F05EE4FCE24FFCE63
+:10053000CF34FFCF6007E490FF92F080ED80E08E33
+:10054000598F582212050C7D077CB71233A07D0FFE
+:100550007C6E1233BA78A17A06E4F608DAFC7A06E1
+:100560001205CF7C03120E57122165E4FEFF7C0FAB
+:10057000123329D2A822123214E490FC38F090FFF2
+:10058000F0E030E408740190FC39F08005E490FC60
+:1005900039F07D0A7C00122547123297221232145C
+:1005A00090FC39E014700E90FFF0E04410F07C00F5
+:1005B0001225E0801990FC39E0700E90FFF0E054B5
+:1005C000EFF07C001225E080057C171225E0123246
+:1005D000972290FFF0E054ABF090FFF0E04420F061
+:1005E000228C378D367882EDF608ECF6EDFEECFDC8
+:1005F0007F019000051201F57880F67882E6FD080B
+:10060000E6FCEDFEECFD7F019000041201F5540FB5
+:10061000FC7D8012176F7880E6700DAD3AAE39AF71
+:1006200038E41203187C082290FFF0E054FEF090AA
+:10063000FFF0E054FDF0801E7882E6FD08E6FCED58
+:10064000FEECFD7F0190000812021725E0440190A6
+:10065000FFF3F00206DB7882E6FD08E6FCEDFEEC37
+:10066000FD7F0190000612021754FE90FFF3F08008
+:100670002B7882E6FD08E6FCEDFEECFD7F019000A4
+:1006800008120217FAEB90FFF1F01208CA400DAD04
+:100690003AAE39AF38E41203187C18227882E6FDAE
+:1006A00008E6FCEDFEECFD7F0190000812021790B9
+:1006B000FFF1F01208CA400DAD3AAE39AF38E4127E
+:1006C00003187C18227882E6FD08E6FCEDFEECFDBE
+:1006D0007F01900006120217440190FFF3F0788327
+:1006E000E62403F618E63400F67880E624FE500986
+:1006F00090FFF0E054FDF0800790FFF0E04402F03E
+:10070000E490FFF1F0788176007880E624FFFCE445
+:1007100034FFFD7881E67F00FEECD39EEF6480CD50
+:1007200064809D402F1208AF400F7881E6AD3AAE4D
+:1007300039AF381203187C182290FFF2E0FC78825F
+:100740008683088682ECF0788106A37882A68308E7
+:10075000A68280B51208AF400F7881E6AD3AAE3977
+:10076000AF381203187C182290FFF2E0FC788286E2
+:1007700083088682ECF07880E6AD3AAE39AF381265
+:1007800003187C00228C378D367882EDF608ECF663
+:10079000EDFEECFD7F019000051201F57881F67801
+:1007A00082E6FD08E6FCEDFEECFD7F019000041200
+:1007B00001F5540FFC7D8112176F7881E670037C80
+:1007C000082290FFF0E054FEF090FFF0E054FDF0BE
+:1007D000801B7882E6FD08E6FCEDFEECFD7F0190D3
+:1007E000000812021725E090FFF3F0805B7882E6A4
+:1007F000FD08E6FCEDFEECFD7F01900006120217FD
+:1008000054FE90FFF3F080217882E6FD08E6FCEDCF
+:10081000FEECFD7F01900008120217FAEB90FFF149
+:10082000F01208CA40037C18227882E6FD08E6FC34
+:10083000EDFEECFD7F0190000812021790FFF1F031
+:100840001208CA40037C18227883E6240AF618E6C8
+:100850003400F6788076007881E624FFFCE434FFEB
+:10086000FD7880E67F00FEECD39EEF6480CD64804F
+:100870009D402178828683088682E090FFF1F01205
+:1008800008CA40037C1822788006788306E6187030
+:10089000010680C390FFF0E04401F078828683086F
+:1008A0008682E090FFF1F01208CA40037C18227C97
+:1008B000002290FFF0E020E71290FFF0E030E50921
+:1008C00090FFF0E04420F0C32280E7D32290FFF0B5
+:1008D000E020E31290FFF0E030E50990FFF0E04403
+:1008E00020F0C32280E7D3228C428D417C00ED545E
+:1008F000F0FDEC7003ED64307005753E0380037508
+:100900003E04AC3E120F74758300858340E541546C
+:100910000FF53FE5407004E53F64037035E53E2484
+:10092000FD75F00AA42402F582E434FCF583E0307E
+:10093000E60512105B8019E53E24A1F8E654FBF6AB
+:1009400078ADE62405F58218E63400F583740FF0DF
+:100950008059E5407004E53F64047048E53E24FD9D
+:1009600075F00AA42402F582E434FCF583E030E556
+:1009700007AC42AD41121C5CE54230E21578B1E6AD
+:1009800030E00F78B1E630E109E4FF04FE7C0412A8
+:10099000332978ADE62406F58218E63400F5837431
+:1009A0000FF08007E4FC7DEE121C5CC203221232C1
+:1009B00014120F7478ADE62406F58218E63400F5BB
+:1009C00083E090FC38F078ADE62405F58218E63433
+:1009D00000F583E090FC39F0C2037D027C00122513
+:1009E00047123297221232147899ECF6EC24A1F8CF
+:1009F000E630E1077C131225E0800F90FC39E0FD22
+:100A00007899E6FC1213F11225E012329722123285
+:100A1000147899ECF67D00120F141225E01232972B
+:100A2000221232147899ECF6EC24A1F8E630E207B1
+:100A30007C131225E0801B7899E624A1F8E620E1DA
+:100A4000077C121225E0800A7899E6FC1214151230
+:100A500025E0123297221232147899ECF6EC24A198
+:100A6000F8E620E2077C111225E0800A7899E6FC7E
+:100A70001215161225E0123297221232147899ECD0
+:100A8000F6120F7478ADE62409F58218E63400F505
+:100A900083E090FC3FF078ADE6240AF58218E63456
+:100AA00000F583E090FC40F078ADE62403F5821871
+:100AB000E63400F583E0FC78ADE62404F58218E620
+:100AC0003400F583E0F56278ADE62402F58218E69D
+:100AD0003400F583E0F5638C61E4EC333354017842
+:100AE00099F66008E56230E1037899067899E69016
+:100AF000FC41F078ABE62402F58218E63400F58379
+:100B0000E0FDA3E0540CFCED54E68C65F564E56172
+:100B100030E503436501E56220E50EE561547F7031
+:100B200008E56120E703436502E56130E3034365BF
+:100B300010E56130E203436520E56154036003433F
+:100B40006540E56130E103436580E56130E40343DE
+:100B50006401E56130E603436408E56220E40EE5E4
+:100B600061547F7008E56120E7034364105365FB1F
+:100B70005364F9AD64E56590FC3ACDF0A3CDF0E5A2
+:100B80006330E30DE5635430C4540F90FC3DF080B6
+:100B900005E490FC3DF0E563540390FC3CF0E56314
+:100BA0005404C31390FC3EF090FC3CE0700E7D3585
+:100BB0007EFC7F01740190000912014B78ADE624A0
+:100BC00008F58218E63400F583E07C00FD78ADE698
+:100BD0002407F58218E63400F583E07F004CFEEF31
+:100BE0004D90FC38F0A3CEF0CEC2037D0A7C0012FB
+:100BF0002547123297221232147899ECF6789E76B5
+:100C0000010876FC087638789B760C789E12046E84
+:100C100012021D789CCBF6CB08F67F00EF24EA4049
+:100C20001FE4EF25E090365AFD93CD0493789D663E
+:100C30007003ED18667006789B760080030F80DCE9
+:100C4000789AEFF6789E12046E90000212021778DE
+:100C50009CCBF6CB08F65404CB54064B6004789B2F
+:100C6000760B789DE630E313789E12046E900005B3
+:100C70001201F524FB5004789B760D789DE654C054
+:100C80007D0064C04D7004789B760B789E12046ED4
+:100C90009000041201F524FC5004789B760F789E96
+:100CA00012046E9000061201F524FD5004789B7624
+:100CB0000E789E12046E9000091201F524FD500476
+:100CC000789B760A789BE6702A7899E6FC120F7476
+:100CD000789E12046E78ABE6F978AAE6FA7B017486
+:100CE0000A7800120348C2037899E6FC12111778BB
+:100CF0009BECF6789BE6FC1225E01232972212322A
+:100D0000147899ECF6120F747899E624FD75F00AC0
+:100D1000A42414F582E434FCF583AC82AD8378AA74
+:100D20008683088682ECF9EDFA7B0A78011203B01B
+:100D3000C2037899E6FC121117123297228D2B8C80
+:100D40002AED60407527017529487528FFE52A249A
+:100D5000FDFCE434FFFDEC7C0325E0CD33CDDCF974
+:100D6000FCE5292CF529E5283DF528AD29AE28AF6D
+:100D700027748090000612032074809000021203F2
+:100D800020120FC7E52B14603B75270175290875E4
+:100D900028FFE52A24FDFCE434FFFDEC7C0325E07C
+:100DA000CD33CDDCF9FCE5292CF529E5283DF528E6
+:100DB000AD29AE28AF27E4900006120320E490008E
+:100DC00002120320221232147899ECF6EC24A1F8D6
+:100DD000E630E2097899E6FC121516D2007899E619
+:100DE000FC120F74789A760090FC39E030E70478B2
+:100DF0009A7601789AE6FD7899E6FC120D3AC203DC
+:100E00003000077899E6FC1214157C001225E012D8
+:100E100032972278ADE62404F58218E63400F58393
+:100E2000E04401F078ADE62404F58218E63400F5DC
+:100E300083E030E00280ED78ADE6240BF58218E621
+:100E40003400F583E054F8F078ADE62402F582181A
+:100E5000E63400F583E04480F022C2038C58120F80
+:100E60007478AA8683088682798B7A367B0A780121
+:100E70001203FE120E10AC587D02120D3AC203ACE2
+:100E800058121117228D538E528F518C50120F749D
+:100E9000754F0078ADE62405F58218E63400F58339
+:100EA000E020E41FE54F24F64019054FC2037C18EB
+:100EB0001233D790FF93E04401F0B2B3AC50120F5D
+:100EC0007480D078ADE62405F58218E63400F58309
+:100ED000E020E405C2037C022278ADE62405F58219
+:100EE00018E63400F583E0540F601678ADE624056B
+:100EF000F58218E63400F583E0540FF0C2037C015C
+:100F00002278AC8683088682E0AD53AE52AF511290
+:100F10000318C2037C00228D318C30121516E53186
+:100F2000600FE530B4030A7C0112250F7C81122585
+:100F30000FAC30120F74E531601A78AE86830886E4
+:100F400082E054E7F0A3A3A3A3E054E7F0AC307D24
+:100F500002120D3A78AA868308868279957A367BC2
+:100F60000A78011203FEC203E53024A1F8E654FD1D
+:100F7000F6AC30121117228C26300305123376801E
+:100F8000F87C0A123289D203E52624FD78A7F67090
+:100F90000778AE76FF0876E078A7E67D007C04252A
+:100FA000E0CD33CDDCF9FC24A078ADF6ED34FF18AC
+:100FB000F678A7E675F00AA42400FCE434FCFD787A
+:100FC000AAEDF608ECF61233222278ADE62402F5FB
+:100FD0008218E63400F583E030E72278ADE624029B
+:100FE000F58218E63400F583E0547FF078ADE6240E
+:100FF00002F58218E63400F583E04480F02278AEF2
+:101000008683088682E0547FF0AD83E5822404FC69
+:10101000E43D8C82F583E0547FF078ADE6240BF557
+:101020008218E63400F583E054F8F078AFE6240146
+:10103000F58218E63400F583E04403F078AFE62447
+:1010400005F58218E63400F583E04403F078ADE658
+:101050002405F58218E63400F583740FF02278AE8B
+:101060008683088682E0543FF0AD83E5822404FC49
+:10107000E43D8C82F583E0543FF078A7E624A8F89D
+:10108000E6FC78AFE62401F58218E63400F583EC3F
+:10109000F078A7E624A8F8E6FC78AFE62405F58208
+:1010A00018E63400F583ECF078ADE6240BF58218F1
+:1010B000E63400F583E054FB4402F52678ABE624E1
+:1010C00002F58218E63400F583E030E5034326019B
+:1010D00078ADE62405F58218E63400F583E030E0CB
+:1010E00003120FC7E526FC78ADE6240BF58218E65F
+:1010F0003400F583ECF078ADE62405F58218E6348B
+:1011000000F583740FF078AE8683088682E0448011
+:10111000F0A3A3A3A3E04480F0228C2A120F7478DA
+:10112000ABE62408F58218E63400F583E0FC78ADE0
+:10113000E6240AF58218E63400F583ECF078ABE695
+:101140002407F58218E63400F583E0FC78ADE62448
+:1011500009F58218E63400F583ECF078AA86830856
+:101160008682E0FDA3E0FCEDFE78ADE62408F58282
+:1011700018E63400F583EEF0ECFE78ADE62407F5D2
+:101180008218E63400F583EEF08C298D28C3EC94A8
+:1011900005ED940C400575277C8033D3E529940137
+:1011A000E5289403400575273C8023D3E5299481E5
+:1011B000E528940140057527188013D3E52994602C
+:1011C000E5289400400575270C8003752708AF2794
+:1011D000E4EF547C4483FF8F27E527FC78AFE624B7
+:1011E00001F58218E63400F583ECF0E527FC78AFD2
+:1011F000E62405F58218E63400F583ECF0E527FCDB
+:1012000078A7E624A8F8ECF678ADE62402F5821873
+:10121000E63400F583E0F52778ABE62402F5821882
+:10122000E63400F583A3E030E3175327C778ABE635
+:101230002405F58218E63400F583E0903686934263
+:101240002778ABE62402F58218E63400F583E03017
+:10125000E70543274080035327BF5327FB78ABE6BE
+:101260002406F58218E63400F583E0600343270482
+:101270005327FC78ABE62404F58218E63400F583A6
+:10128000E04227432780E527FC78ADE62402F5827B
+:1012900018E63400F583ECF078ADE62404F5821806
+:1012A000E63400F583E0F52778ABE62402F58218F2
+:1012B000E63400F583A3E030E1055327DF800343E4
+:1012C000272078ABE62402F58218E63400F583E0A7
+:1012D00030E4055327EF800343271078ABE6240959
+:1012E000F58218E63400F583E0B40203432702E5F3
+:1012F00027FC78ADE62404F58218E63400F583EC8B
+:10130000F078ADE62403F58218E63400F583E0F5C5
+:101310002778ABE62409F58218E63400F583E070FF
+:101320000553277F800343278078ABE62402F582AC
+:1013300018E63400F583A3E030E00543272080035E
+:101340005327DF78ABE62402F58218E63400F583F4
+:10135000E030E30543274080035327BF78ABE62402
+:1013600002F58218E63400F583E030E005432710EB
+:1013700080035327EF78ABE62402F58218E63400A9
+:10138000F583A3E030E40543270880035327F7786B
+:10139000ABE62402F58218E63400F583A3E030E5DD
+:1013A0000543270480035327FB78ABE62402F5822C
+:1013B00018E63400F583A3E030E6054327018003F7
+:1013C0005327FE78ABE62402F58218E63400F58355
+:1013D000A3E030E70543270280035327FDE527FC00
+:1013E00078ADE62403F58218E63400F583ECF0C20C
+:1013F000037C00228D278C26ED54031460037C109F
+:1014000022E527547C24FC40037C0B22E52624A102
+:10141000F8E64402F67C00228C30120F74E530248A
+:10142000A1F8E620E24FAC307D02120D3AE53024FF
+:10143000FE4428FC78AE8683088682ECF0AF83E514
+:10144000822404FEE43FFFEC8E828F83F07C038CC9
+:101450002CE52CFC78AFE62401F58218E63400F583
+:1014600083ECF0E52CFC78AFE62405F58218E63431
+:1014700000F583ECF0752D01752F48752EFFE530D2
+:1014800024FDFCE434FFFDEC7C0325E0CD33CDDC12
+:10149000F9FCE52F2CF52FE52E3DF52E78AFE6244F
+:1014A00004F58218E63400F583E054E7F52CAD2FFF
+:1014B000AE2EAF2DE4900002120320E4900006123D
+:1014C00003201201EF30E503432C10E52CFC78AF2C
+:1014D000E62404F58218E63400F583ECF012105B84
+:1014E00078ADE62406F58218E63400F583E0C20301
+:1014F000FCE53024A1F8E64404F68C2CE530540FCA
+:10150000C454F07E00FFEEEF44047D00FFEC4EFC7F
+:10151000ED4FFD121CC77C00228C2F120F74120F8E
+:10152000FB78AE8683088682E05408F0A3A3A3A3C9
+:10153000E05408F0AC2F7D02120D3AC203E52F24CF
+:10154000A1F8E654FBF67C0022123214789AECF6ED
+:10155000EC24A1F8E630E10A7D007C131225471245
+:101560003297789AE624A1F8E64401F6789AE6FCE8
+:10157000120F74789AE624FD75F00AA42414F582FB
+:10158000E434FCF58378AAE6FA08E6F97B0A7801E8
+:101590001203B078AA868308868279957A367B0A08
+:1015A00078011203FE120FC7C203789AE6FC1211EB
+:1015B000177899ECF6EC600A7D007C08122547123A
+:1015C0003297789AE6FC120F7478ADE62404F5821F
+:1015D00018E63400F583E0441054DFFC78ADE624CF
+:1015E00004F58218E63400F583ECF07899ECF6C245
+:1015F000037CC81233D7789AE6FC120F7478ADE6F4
+:101600002404F58218E63400F583E054EFF0C203B9
+:101610007CC81233D7789AE6FC120F7478ADE624B2
+:1016200004F58218E63400F583E04410F0C2037C30
+:10163000C81233D7789AE6FC120F7478ADE624040A
+:10164000F58218E63400F583E04420F0C2037CF014
+:101650001233D7789AE6FC120F7478ADE62405F5BC
+:101660008218E63400F583E030E415C203789AE688
+:1016700044107F00FE7C0712332912329702173D77
+:1016800078ADE62404F58218E63400F583E054CF03
+:10169000F0C2037CC81233D7789AE6FC120F747834
+:1016A000ADE62404F58218E63400F583E04430F01A
+:1016B000C2037CF01233D7789AE6FC120F7478AD2F
+:1016C000E62405F58218E63400F583E030E414C220
+:1016D00003789AE644107F00FE7C07123329123209
+:1016E00097805D78ADE62404F58218E63400F58332
+:1016F000E054EFF078ADE62404F58218E63400F506
+:1017000083E054DFF0789AE624FD75F00AA42414EF
+:10171000F582E434FCF583AC82AD8378AA86830835
+:101720008682ECF9EDFA7B0A78011203B0C20378E5
+:101730009AE6FC1211177D007C0B12254712329796
+:1017400022123214E490FC39F07D027C001225470D
+:10175000123297221232147C001225E012329722A4
+:10176000743C90FBE0F0743E90FBE0F0E490FC28C9
+:10177000F0228D358C34ECB401028003D34002801A
+:1017800028B402028003D34008A835E625E0F6809D
+:1017900018B404028003D3400AA835E625E025E00A
+:1017A000F68006A83576008000228C3C8D3BEDFE4D
+:1017B000ECFD7F0175660675670090FC29120477C1
+:1017C0001201EFB480028006D3500302187090FC1F
+:1017D000291204899000031201F554F0B4300280FC
+:1017E00003D3405F90FC291204899000081202176D
+:1017F000FAFDEBFE7F0190FC2C120477EECD9036C3
+:101800009FFCE493FF740193FEF9EFFA7B01EAFF7A
+:10181000E9FEECC39EED9F40259036A1E493FD7454
+:101820000193FCEDFEECFD7F01EECDFC90FC2EE083
+:10183000D39C90FC2DE09D50057566808033121975
+:101840008E802EB460028003D3400BAC3CAD3B12C3
+:1018500007828C66801BB41003B34010C3B420030E
+:10186000B34009C3B440028003D340007566818051
+:10187000008075B481028003D3406B90FC29120470
+:10188000899000031201F554F0B430028003D34074
+:101890001D90FC29120489900008120217FAFDEB32
+:1018A000FE7F0190FC2F1204771218F88036B46086
+:1018B000028003D34013753A67E4F539F538AC3C40
+:1018C000AD3B1205DE8C66801BB41003B34010C321
+:1018D000B42003B34009C3B440028003D340007571
+:1018E0006681800080028000E566FC90FC2912047D
+:1018F00089EC900002120320AC672290FC291204AC
+:10190000899000041201F5600474018001E4A2E0F2
+:10191000920190FC29120489ED2403FD50010E90E0
+:10192000FC2C12047790FC29120489900005120106
+:10193000F5F5679000041201F5540FFC7D6712174E
+:101940006FE5677004756608227566007884760016
+:101950007884E6C39567503890FC2F1204891201F1
+:10196000EFFC90FC2C120489EC12031830010E904D
+:10197000FC31E004F090FC307003E004F078840661
+:1019800090FC2EE004F090FC2D7003E004F080C089
+:101990002290FC2AE0FDA3E0FCEDFEECFD7F01EDD2
+:1019A000240AFD50010E90FC3212047790FC29129B
+:1019B00004899000041201F5540FB401028003D38E
+:1019C000401790FC321204890DED70010E90FC2F2F
+:1019D00012047778887601804EB402028003D340E7
+:1019E0001990FC32120489ED2402FD50010E90FC86
+:1019F0002F12047778887602802DB404028003D3F6
+:101A0000401990FC32120489ED2404FD50010E901F
+:101A1000FC2F12047778887604800CB400028003CF
+:101A2000D340007566082290FC29120489900005B5
+:101A30001201F5F567788576007885E6C3956740ED
+:101A400003021AF6788676007886E6C37888965080
+:101A50007690FC2C1204891201EFFC90FC321204E7
+:101A6000921201E9F45CFC1201E9F890FC2F1204D7
+:101A700089E8C0E01201EFC8D0E0C8584CFC90FCE7
+:101A80002C120489EC1203187887ECF690FC31E0F4
+:101A900004F090FC307003E004F009E970010A9052
+:101AA000FC3212048090FC29120489900004120177
+:101AB000F530E40E90FC2EE004F090FC2D7003E075
+:101AC00004F078860680817888E6FDE4FEFFEECD9E
+:101AD000FC90FC31E02CF090FC30E03DF07888E6A2
+:101AE000FDE4FEFFEECDFC90FC34E02CF090FC33E6
+:101AF000E03DF0788506021A367566002222C0E0C5
+:101B0000C0F0C082C083C0D0E8C0E0E9C0E0EAC055
+:101B1000E0EBC0E0ECC0E0EDC0E0EEC0E0EFC0E024
+:101B200090FF92E01201C01B49301B49321B58380C
+:101B30001B6A3A1B7C3E1B94441B88461BA0501B0F
+:101B4000E2521BC1541C035600001C2490FF92E07B
+:101B50007F00FE7C01123329021C34E4FF04FE7C6A
+:101B600003123329742090FFFEF0021C34E4FF04BA
+:101B7000FE7C02123329744090FFFEF0021C34E414
+:101B8000FF04FE7C04123329021C34E4FF04FE7CB3
+:101B900005123329021C34E4FF04FE7C06123329AB
+:101BA000021C3490FFA5E07D0090FBF8CDF0A3CDA2
+:101BB000F090FBF9E0FCF58390FBF8E04433FD1274
+:101BC0001CC7807390FFB5E07D0090FBFACDF0A3B9
+:101BD000CDF090FBFBE0FCF58390FBFAE04443FD85
+:101BE000121CC7805290FFA6E07D0090FBFCCDF058
+:101BF000A3CDF090FBFDE0FCF58390FBFCE04434CA
+:101C0000FD121CC7803190FFB6E07D0090FBFECD39
+:101C1000F0A3CDF090FBFFE0FCF58390FBFEE044E9
+:101C200044FD121CC7801090FF92E07D00FCED4443
+:101C3000AAFD121CC78000E490FF92F0D0E0FFD014
+:101C4000E0FED0E0FDD0E0FCD0E0FBD0E0FAD0E058
+:101C5000F9D0E0F8D0D0D083D082D0F0D0E03205F7
+:101C600081058105810581A881181818EDF608EC19
+:101C7000F690FF5AE020E70280F790FF59E07D00E0
+:101C8000A88118CDF6CD08F67D03A881E618FCE6FC
+:101C9000CC25E0CC33CCDDF9CCF6CC08F6A8811805
+:101CA000E644F8F6A881181818E6FD08E6FCA881B5
+:101CB000188683088682EDF0A3ECF0740290FF5A38
+:101CC000F0158115811581158122E5812405F581A5
+:101CD000E4A88118F6A88118181818EDF608ECF693
+:101CE00090FBF5E024F85003021DE8E4A8811818E1
+:101CF000F6A88118E6FEA88118181818E6FD08E66F
+:101D0000FC7F00EF24F8404DE4EF25E0247DF582D0
+:101D1000E434FCF583E0FBA3E06C7003FAEB6D7038
+:101D2000097401A8811818F6802BE4EF25E0247DC2
+:101D3000F582E434FCF5837A00E054F0CCF8CCCDA5
+:101D4000F9CDFB7800E954F0F9EA687002EB6970AC
+:101D5000010E0F80AEA88118EEF6A8811818181889
+:101D6000EDF608ECF6A881EFF6A8811818E6707970
+:101D7000A88118E624F74071A88118181818E654AD
+:101D80000FA881F664046017A881E664036010A8B8
+:101D90008118181818E6FD08E6FC121C5C804A7CC5
+:101DA0000A123289A88118181818E6FD08E6FC9076
+:101DB000FBF4E025E0247DF582E434FCF583EDF0CE
+:101DC000A3ECF090FBF4E0FFE4EF045407FF90FB7A
+:101DD000F4F090FBF5E004F012332290FBF6E07093
+:101DE00008E4FEFF7C0F123329802790FBF7E00404
+:101DF000F0543F701D90FBF7E044FE7D00FC90FB2B
+:101E0000F4E025E0247DF582E434FCF583EDF0A3D5
+:101E1000ECF0E58124FBF58122788B7600788C76D6
+:101E200000740190FBF6F012321490FBF5E060575D
+:101E30007C0A12328990FBF3E025E0247DF582E4F0
+:101E400034FCF583E0FDA3E0FC90FBF3E025E02407
+:101E50007DF582E434FCF583E4F0A3F090FBF3E03D
+:101E6000FFE4EF045407FF90FBF3F090FBF5E01460
+:101E7000F07889EDF608ECF61233227889E6FD0851
+:101E8000E6FC1208E580A312337690FF93E044014C
+:101E9000F0B2B3788B06B6000D788B7600788CE6BE
+:101EA000F40404788CF68082E490FBF6F090FBF565
+:101EB000E07D00FCED44CFFD121C5C123297221233
+:101EC0003214E5706449456F601590FF83E0540F4C
+:101ED0007D00D39570ED956F500512305D80031233
+:101EE000312D12329722123214E5706449456F6029
+:101EF00005123167800E90FF80E04408F090FF8368
+:101F0000E0547FF0123297221232148C54EC54F0C9
+:101F1000B41015756A357569FC756801E56A2403A6
+:101F2000F56AE5693400F569E4F557F556E556C3F9
+:101F300094015027E554540FFCAD6AAE69AF6812A6
+:101F40000E828C55EC60028012056AE56A7002050B
+:101F5000690557E5577002055680D2E554540F24A1
+:101F6000A1F8E654FEF6E554540F7F00FE7C1212F1
+:101F70003329E5551470097D007C09122547800737
+:101F8000AD577C001225471232972212321490FF6F
+:101F9000FCE04402F090FF00E030E71390FF83E0A4
+:101FA0004480F0436D8090FFFCE04401F08011908C
+:101FB000FF82E04408F0536D7F90FFFCE054FEF098
+:101FC00090FF81E04480F01225FA90FFFEE0440586
+:101FD000F090FFFCE054FDF0123297221232147C94
+:101FE000011233D778B1E64402F674FEFC04FD1208
+:101FF0001CC790FF5AE030E70280F7E4F54E754DBC
+:1020000010AC4EAD4DE54E154E7002154DEC4D60C9
+:102010000280EE438701123297221232147C0212A0
+:1020200032A378B1E654FDF61232972212321478B8
+:10203000B1E630E02C78B1E630E12678B1E6FCF587
+:102040008318E644F0FD121C5C90FFFCE04420F095
+:102050007C021233D778B1E654FDF6741A90FFFE75
+:10206000F078B1E6FCF58318E644F1FD121C5C1231
+:10207000329722756D0090FFFFE06003436D01759C
+:102080006E00E4F56CF56BE4F56F7570497484903F
+:10209000FF82F0748490FF80F0748090FF58F07499
+:1020A0008090FF5AF0AD46AF457E00EE24FE50030F
+:1020B00002213FE4EE75F007A4247FF582E434F8B2
+:1020C000F583E0FFE4EF5480FDE4EF540F14FFEDDF
+:1020D0006038E4EF75F008A42448F582E434FFF595
+:1020E000837490F0E4EF75F008A4244AF582E43498
+:1020F000FFF5837480F0E4EF75F008A4244EF582B8
+:10210000E434FFF5837480F08034E4EF75F008A4C4
+:102110002408F582E434FFF5837490F0E4EF75F061
+:1021200008A4240AF582E434FFF583E4F0E4EF75B3
+:10213000F008A4240EF582E434FFF583E4F00E02E7
+:1021400020A88D468E448F45747F90FFFDF07490DB
+:1021500090FFFCF0228C58EC24F65006E55824370A
+:10216000FC22E5582430FC22D2B0D2B1C2B41225F0
+:1021700044EC700302227F755C03AE5B7F00E55C7C
+:10218000155C6480247F5035EF2400F582E434FB35
+:10219000F583E0FE24FE501EEF7D00FCE4FB74742A
+:1021A000C39CFAEB9DFBEE7D00FCEAC39CED6480D2
+:1021B000CB64809B50028005EF2EFF80C18E5B8F29
+:1021C0005AE55C6480247F500302227FE55A248E06
+:1021D000500302227F855A5D755B00AE5AAF5B905B
+:1021E00036CAE493F55CE55C155C6480247F501886
+:1021F000EE2400F582E434FBF583E0FCEF9036CA70
+:10220000936C70040E0F80DE8E5A8F5BE55C6480E9
+:10221000247F406E755E017560E8755FFFE55D24A3
+:1022200002F55A755C07E55C334057AD60AE5FAFB1
+:102230005EE55CF5823395E0F5831201F5C4540F39
+:10224000FC122152E55A2400F582E434FBF583ECBC
+:10225000F0055A055AAD60AE5FAF5EE55CF58233BE
+:1022600095E0F5831201F5540FFC122152E55A2432
+:1022700000F582E434FBF583ECF0055A055A155C51
+:1022800080A4740290F851F090F86B79A37A367BB1
+:102290002778011203FE756A357569FC756801E4DB
+:1022A00090FF83F0748090FF81F0755902E55975B5
+:1022B000F007A4247FF582E434F8F583E07893F600
+:1022C000FC540F14FC7893ECF6E55975F007A42440
+:1022D00081F582E434F8F583E0789676FD0876E8B7
+:1022E000FC7893E675F008A42448F582E434FFF501
+:1022F00083E4F07893E675F008A4244FF582E43483
+:10230000FFF583ECF07896E6FF08E67E03CFC31373
+:10231000CF13DEF9FE7893E675F008A42449F58220
+:10232000E434FFF583EEF07893E675F008A4244AD0
+:10233000F582E434FFF5837480F07894ECF67D0048
+:102340007897E62CF618E63DF67896E6FD08E67CEA
+:1023500003CDC313CD13DCF9FC7893E675F008A424
+:10236000244DF582E434FFF583ECF07893E675F0C4
+:1023700008A4244EF582E434FFF583E4F07896E671
+:10238000FD08E6FC7893E6FF7E00EE24FE50030293
+:1023900024FEE4EE75F007A4247FF582E434F8F51A
+:1023A00083E0FFE4EF5480FAE4EF540F14FFE4EE0F
+:1023B00075F007A42481F582E434F8F583E078947D
+:1023C000F6E4EE1313548024F0F8E434FDF9E8FC4D
+:1023D000E9FD8A5AEA700302246BE4EF75F008A461
+:1023E0002448F582E434FFF583E4F07894E6FAE4D7
+:1023F000EF75F008A4244FF582E434FFF583EAF08A
+:10240000EDFBEC7A03CBC313CB13DAF9FAE4EF75E7
+:10241000F008A42449F582E434FFF583EAF07894C7
+:10242000E67B00FAEC2AFCED3BFDFBEC7A03CBC328
+:1024300013CB13DAF9FAE4EF75F008A4244DF58212
+:10244000E434FFF583EAF0E4EF75F008A4244AF5DC
+:1024500082E434FFF5837480F0E4EF75F008A4247F
+:102460004EF582E434FFF5837480F00224FAE4EF41
+:1024700075F008A42408F582E434FFF583E4F078CD
+:1024800094E6FAE4EF75F008A4240FF582E434FF33
+:10249000F583EAF0EDFBEC7A03CBC313CB13DAF947
+:1024A000FAE4EF75F008A42409F582E434FFF5831B
+:1024B000EAF07894E67B00FAEC2AFCED3BFDFBECBD
+:1024C0007A03CBC313CB13DAF9FAE4EF75F008A45F
+:1024D000240DF582E434FFF583EAF0E4EF75F008AB
+:1024E000A4240AF582E434FFF583E4F0E4EF75F008
+:1024F00008A4240EF582E434FFF583E4F00E0223F1
+:10250000878E597896EDF608ECF67893EFF6122060
+:1025100070228C26EC30E718E526540F1475F0086D
+:10252000A42448F582E434FFF583E054DFF08016FC
+:10253000E526540F1475F008A42408F582E434FF4E
+:10254000F583E054DFF0227C0022EC90FC37F08C25
+:1025500024ED2403F5257D00D39572ED957140039C
+:10256000857225E52524B75009752503740290FC72
+:1025700037F0AC2512315222E4F56CF56B12257E52
+:102580002290FC35E06573600E740490FC37F0E433
+:10259000F56B756C0380467D73E4FEFF79357AFC3C
+:1025A0007B0174057800120348E56C2403F56CE5A3
+:1025B0006B3400F56BE56CD39572E56B9571400655
+:1025C00085726C85716BD3E56C9448E56B94004023
+:1025D0000C740290FC37F0E4F56B756C03AC6C1274
+:1025E000315222EC90FC37F0E4F56CF56B8C32EC58
+:1025F000600512314380057C001231522290FF9316
+:10260000E04401F0B2B390FF04E0F54A90FF06E029
+:10261000FDA3E0ED7D00FC7D00FC90FF06E0FFA344
+:10262000E07E00FFE4FEEC4EFCED4FFDC3EC944871
+:10263000ED9400502290FF06E0FDA3E0ED7D00FC4C
+:102640007D00FC90FF06E0FFA3E07E00FFE4FEECCF
+:102650004EFCED4FFD8004E4FD7C488C728D719042
+:10266000FF02E0FDA3E0ED7D00FC7D00FC90FF0299
+:10267000E0FFA3E07E00FFE4FEEC4EF54CED4FF5ED
+:102680004B756A357569FC7568017D357EFC7F0187
+:102690007973E4FAFB74057800120348754900E584
+:1026A0004924FE4019AD6AAE69AF68E4120318050B
+:1026B000490DED70010E8D6A8E698F6880E1756A33
+:1026C000357569FC75680178B3E614184660030235
+:1026D00027927890E6FF08E6FE788EE4F608F6C3C7
+:1026E000788FE6940218E69400501DE4FEFFC3EED6
+:1026F00094E8EF940350070EBE00010F80F0788F2E
+:1027000006E61870010680D77890EFF608EEF6D24C
+:10271000B47890E6FF08E6FE788EE4F608F6C37813
+:102720008FE6941E18E69400501DE4FEFFC3EE945D
+:10273000E8EF940350070EBE00010F80F0788F067B
+:10274000E61870010680D77890EFF608EEF6C2B171
+:102750007890E6FF08E6FE788EE4F608F6C3788FF8
+:10276000E6943A18E69400501DE4FEFFC3EE94E8A8
+:10277000EF940350070EBE00010F80F0788F06E63D
+:102780001870010680D77890EFF608EEF6D2B1788F
+:10279000B2E4F608F690FF00E05460B40002800650
+:1027A000D35003022D9BE54A540FF549E54A548066
+:1027B000A2E0920290FF01E012018A000B2D962701
+:1027C000D428F22D9629FE2D962AE12B152C7C2C4F
+:1027D0007F2CBF2D3F2D6DE56D30E70EE54C454B51
+:1027E0007008E572640245716003022D9890FF0045
+:1027F000E0541FB400028003D34029E54A6003027D
+:1028000028EFAD6AAE69AF68740112031878B1E6BB
+:1028100030E00BAD6AAE69AF6874021203187C0237
+:1028200012315222B401028003D3401BE56D20E136
+:1028300007E54A60030228EFE54A24FE5003022818
+:10284000EF7C0212315222B402028006D3500302FE
+:1028500028EDE56D20E10DE54A6009E54A648060F8
+:10286000030228EFAC4A1231D940030228EFE549B0
+:10287000702530021190FF80E05408AD6AAE69AF58
+:1028800068120318800F90FF82E05408AD6AAE69A9
+:10289000AF68120318803D154930021DE54975F0F7
+:1028A00008A42448F582E434FFF583E05408AD6AB7
+:1028B000AE69AF68120318801BE54975F008A424BF
+:1028C00008F582E434FFF583E05408AD6AAE69AFE1
+:1028D00068120318AD6AAE69AF681201EF600BAD04
+:1028E0006AAE69AF6874011203187C021231522279
+:1028F0008000022D98E56D20E706E57245716003C2
+:10290000022D9890FF00E0541FB400028003D340D2
+:102910001AE54C14454B7004E54A60030229FB7824
+:10292000B1E654FEF67C0012315222B4010280035B
+:10293000D3402AE56D20E108E56D20E0030229FB84
+:10294000E56D30E004E54A700BE56D30E109E54ADC
+:1029500024FE50030229FB7C0012315222B40202F1
+:102960008006D350030229F9E54C454B6003022948
+:10297000FBAC4A1231D940030229FBE56D20E10787
+:10298000E56D20E0028077E56D30E006E549600204
+:10299000806CE549700F90FF82E054F7F090FF8063
+:1029A000E054F7F022E549B401028003D340097DE9
+:1029B000017C03120F148011B402028003D340097A
+:1029C0007D017C04120F1480001549300215E54981
+:1029D00075F008A42448F582E434FFF583E054F749
+:1029E000F08013E54975F008A42408F582E434FF6B
+:1029F000F583E054F7F07C00123152228000022D62
+:102A000098E56D20E706E57245716003022D989008
+:102A1000FF00E0541FB400028003D3401AE54C14B9
+:102A2000454B7004E54A6003022ADE78B1E64401B2
+:102A3000F67C0012315222B401028003D34029E512
+:102A40006D20E108E56D20E003022ADEE56D30E04F
+:102A500004E549700BE56D30E108E54924FE5002BC
+:102A6000807F7C0012315222B402028003D3406F77
+:102A7000E54C454B60028069AC4A1231D940028076
+:102A800060E56D20E107E56D20E0028054E54970C6
+:102A90001430020990FF80E04408F0800790FF8224
+:102AA000E04408F022E56D30E1331549300215E5C8
+:102AB0004975F008A42448F582E434FFF583E04426
+:102AC00008F08013E54975F008A42408F582E43481
+:102AD000FFF583E04408F07C00123152228002802E
+:102AE00000022D98E56D20E712E5724571700CE546
+:102AF0004A700890FF00E0541F6003022D98E54CD7
+:102B000090FFFFF090FFFFE06005436D01800353ED
+:102B10006DFE7C0012315222E56D30E70EE5724504
+:102B200071600890FF00E0541F6003022D98AD4BC8
+:102B3000E54CED7D00FC7D00FCBD00028003022C15
+:102B400077B401028003D34032E54A7005E54CFCBE
+:102B50006003022C79756A407569F8756801D3E5E0
+:102B6000729412E57194004006E4FD7C128004AC7E
+:102B700072AD718C708D6F12316722B402028003C6
+:102B8000D34059E54A6003022C79E54CFC70277567
+:102B90006A527569F8756801D3E5729419E5719404
+:102BA000004006E4FD7C198004AC72AD718C708D20
+:102BB0006F1231678025756A6B7569F8756801D386
+:102BC000E5729427E57194004006E4FD7C278004BB
+:102BD000AC72AD718C708D6F12316722B4030280BC
+:102BE00006D35003022C77E54CF549700F90FF0493
+:102BF000E0FDA3E04D6003022C79801890FB02E019
+:102C0000FDA3E0FC90FF05E06C700790FF04E06D11
+:102C100060028068E4F570F56F7F00E54914C549EE
+:102C2000600FEF2400F582E434FBF583E02FFF8092
+:102C3000EA8F4AE54A2400F582E434FBF583E07D1F
+:102C400000D39572ED95714006AC72AD71800FE5C1
+:102C50004A2400F582E434FBF583E07D00FC8C70AF
+:102C60008D6FE54A2400FCE434FBFDFEECFD7F01A2
+:102C70008D6A8E698F68123167228000022D98025A
+:102C80002D98E56D30E719E5721445717012E54A2B
+:102C9000700EE54C454B700890FF00E0541F600338
+:102CA000022D98E56D20E008E56D20E103022D98E6
+:102CB000756A6EE4F569F568E4F56F04F570123134
+:102CC0006722E56D20E727E57245717021E54A70BE
+:102CD0001DE54C6402454B600DE54C14454B600608
+:102CE000E54C454B700890FF00E0541F6003022D37
+:102CF00098E56D20E008E56D20E103022D98854CF4
+:102D00006EE56E7010436D01536DFDD2B078B2E484
+:102D1000F608F68027E56E64026007E56E1460022F
+:102D20008079536DFE436D02E56E64026005E56EC9
+:102D300014700978B2E4F60804F6C2B07C001231CF
+:102D40005222E56D30E71AE5721445717013E54AB9
+:102D5000700FE54C454B700990FF00E0541F146064
+:102D6000028038E56D20E10280317C01123152226F
+:102D7000E56D20E715E5724571700FE54C454B7028
+:102D80000990FF00E0541F146002800FE56D20E100
+:102D90000280087C00123152228000023059B44077
+:102DA000028006D3500302304F90FF01E090FC35C3
+:102DB000F0E54A90FC36F0E490FC37F0E56A240335
+:102DC000F56AE5693400F569AD4BE54C856A8285A5
+:102DD0006983CDF0A3CDF090FF01E01201C02E0673
+:102DE000012E2C022E56032E80042ECE052F0B060C
+:102DF0002F31072F57082F83092FA90B2FCF0C2F07
+:102E0000DE802FDE810000303CE56D20E7067C058A
+:102E10001225E0227D527E367F0279387AFC7B01D2
+:102E2000740878001203487D087C0012254722E5CB
+:102E30006D20E7067C051225E022E54AB403004038
+:102E400010B40500500BE54A7F00FE7C10123329B8
+:102E5000227D007C0712254722E56D20E7067C05D0
+:102E60001225E022E54AB403004010B40500500BDF
+:102E7000E54A7F00FE7C11123329227D007C071277
+:102E8000254722E56D20E7067C051225E022E54A6C
+:102E9000B405028003D3400AE4FF04FE7C0A123327
+:102EA0002922B401028003D3400AE4FF04FE7C0817
+:102EB00012332922B403004010B40500500BE54A38
+:102EC0007F00FE7C13123329227D007C07122547E8
+:102ED00022E56D20E734D3E5729448E57194005003
+:102EE00006E572457170067C021225E022E54AB4BF
+:102EF0000103B3400BC3B403004009B406005004FF
+:102F00001231FF227C071225E02212257E22E56D78
+:102F100020E71DE54AB403004010B40500500BE55E
+:102F20004A7F00FE7C16123329227C071225E022FC
+:102F300012257E22E56D20E71DE54AB4030040100E
+:102F4000B40500500BE54A7F00FE7C19123329229C
+:102F50007C071225E02212257E22E56D20E72374EE
+:102F60008190FF93F0E54AB403004010B40500508F
+:102F70000BE54A7F00FE7C17123329227C071225BD
+:102F8000E02212257E22E56D20E71DE54AB403000C
+:102F90004010B40500500BE54A7F00FE7C18123348
+:102FA00029227C071225E02212257E22E56D20E7EA
+:102FB0001DE54AB403004010B40500500BE54A7FFC
+:102FC00000FE7C15123329227C071225E0221225EF
+:102FD0007E22E56D20E7067C071225E02212257E81
+:102FE00022E56D30E72090FF00E0541F701090FF45
+:102FF00001E0B48005122575800312257E227D0034
+:103000007C051225472290FF00E0541F60067C05D6
+:103010001225E022D3E5729448E5719400500BC369
+:10302000E5729407E571940050067C031225E022B6
+:10303000E54AB405041231FF227C071225E022E59F
+:103040006D30E7087D007C05122547227C0512259E
+:10305000E022B420028003D34000800012312D22F0
+:1030600075430090FF83E0540FD395434024E5431C
+:1030700024F0F582E434FEF583E0AD6AAE69AF6812
+:1030800012031805430DED70010E8D6A8E698F686D
+:1030900080D1E5437D00FCC3E5709CF570E56F9D34
+:1030A000F56FE570456F6006E490FF83F02290FFB6
+:1030B00082E04408F0E4F56F75704990FC35E0B4A7
+:1030C00005028003D3404090FC36E0F543B405028E
+:1030D0008003D3400AE4FF04FE7C0B12332922B4A0
+:1030E00001028003D3400AE4FF04FE7C0912332965
+:1030F00022B403004010B40500500BE5437F00FEEE
+:103100007C141233292222B480004023B482005060
+:103110001E7C357DFC1217A77D008C6C8D6B90FC9E
+:1031200037E0600512312D80057C001231522222D9
+:1031300090FF83E0547FF090FF82E04408F090FF1E
+:1031400080E04408F02290FF82E04408F090FF8085
+:10315000E04408F0228C237D008C708D6F756A35F9
+:103160007569FC7568011231672290FF83E0547F16
+:10317000F0E5706449456F700122C3E5709408E57D
+:103180006F94004015752108E5217D00FCC3E570B2
+:103190009CF570E56F9DF56F8009857021E4F56FF2
+:1031A000757049752200E522C395215026AD6AAE9F
+:1031B00069AF681201EFFCE52224F8F582E434FEE1
+:1031C000F583ECF005220DED70010E8D6A8E698F8E
+:1031D0006880D3E521547F90FF81F0228C487F00E6
+:1031E000EF24FD4019E4EF75F007A4247FF582E495
+:1031F00034F8F583E065487002D3220F80E28F47F0
+:10320000C32285727085716F90FF82E054F7F09051
+:10321000FF83E0547FF022C000C001C002C006C09E
+:1032200007E5782408F8860653067F7CFF1232896A
+:103230007C007D00E57B6046FF90FD95E0547F6E4D
+:10324000700FC083C082A3E0FDA3E0FCA3157B80C8
+:1032500007A3A3A3DFE68026DF06D082D083801EEB
+:10326000E0F8A3E0F9A3E0FAD082D083E8F0A3E984
+:10327000F0A3EAF0A3C083C082A3A3A380DA123331
+:1032800022D007D006D002D001D0002285A87A75BE
+:10329000A888EC70027C3F8C7922E5782408F876C7
+:1032A0000012337680FBC000C001C002C006C00718
+:1032B000AE047CFF123289E57B6042FF90FD95E011
+:1032C000547F6E700BC083C082A3A3A3157B8007BD
+:1032D000A3A3A3DFEA8026DF06D082D08380D8E0D4
+:1032E000F8A3E0F9A3E0FAD082D083E8F0A3E9F0F4
+:1032F000A3EAF0A3C083C082A3A3A380DA7808085E
+:103300007918097C01E6547F6E700676007700809C
+:103310000608090CBC08EE123322D007D006D002F2
+:10332000D001D00022757900857AA822C0F0C08231
+:10333000C083C3E57B24E8500512337680F4EC604B
+:1033400031903651E493C39C4028C0047CFF123274
+:1033500089D004430480E57B75F003A42495F582AD
+:10336000E434FDF583ECF0EFA3F0EEA3F0057B125F
+:103370003322D083D082D0F022C0047C20D28CD2E1
+:103380008DD504FDD0042275A80075880075B8009D
+:1033900075F00075D000E4F8900000F608B800FB66
+:1033A000020000C3ED940250047D037CE8ECF4FCC1
+:1033B000EDF4FD0CBC00010D8C7F8D7E22C3EC94DE
+:1033C000BCED940250047D077CD0ECF4FCEDF4FDE0
+:1033D0000CBC00010D8C7D8D7C22EC700122C000A4
+:1033E000E5782418F8A604E5782408F8C6547FF692
+:1033F000E630E703D0002212337680F4C28C857C5D
+:103400008C857D8AD28CC0E0C0D0C0F0C082C083E1
+:10341000C000C001C002C003C004C005C006C00790
+:10342000121AFAE5782408F8E66024E5782410F802
+:10343000A681E57875F021A4248DF582E434FCF5AD
+:103440008378B4E58104C398F9E6F008A3D9FA7447
+:10345000082578F8057808E65480700CE578B407FC
+:10346000F3780875780080EFE5782410F88681E518
+:103470007875F021A4248DF582E434FCF58378B4CA
+:10348000E58104C398F9E0F608A3D9FAD007D0067D
+:10349000D005D004D003D002D001D000D083D08298
+:1034A000D0F0D0D0D0E032C0E0C0D0C000C001C069
+:1034B00002C28E857E8D857F8BD28E781979097AAE
+:1034C00007E77004A600800BE6600816E67004E7C4
+:1034D0004480F70809DAEAE579601314F579700E8B
+:1034E000E5782408F87600123322D28CD28DD002EF
+:1034F000D001D000D0D0D0E0327581B3742A90FFD3
+:1035000093F0757F30757EF8757D60757CF01205DF
+:10351000411235AA12175D90FF93E04401F0B2B357
+:103520001235D412338480DA22C0007C01EC2408E6
+:10353000F8E660090CBC08F512337680EED0002264
+:10354000C0F0C082C083C000C006C007ED2410F8E0
+:1035500076C2ED75F021A4248DF582E434FCF58368
+:10356000C082C083A3A3E4780DF0A3D8FCEC547F01
+:1035700075F002A4241DF582E5F03436F583E4935A
+:10358000FE740193F5828E83E493FE740193FFD061
+:1035900083D082EFF0A3EEF0ED2408F8EC4480F63F
+:1035A000D007D006D000D083D082D0F0227578002A
+:1035B000757B007A0879187808760077000809DAB0
+:1035C000F8E478087480447FF674014410F5897536
+:1035D000B808D2ABD2A9227581B3D28ED28CD2AF29
+:1035E000E57B6032FF90FD95E05480602478087997
+:1035F00008E0547FFA7B00E6547FB502027BFF08A7
+:10360000D9F5EB700CEAF0123526AD04AC02123598
+:103610003DA3A3A3DFD212337680C57C017D0022B7
+:10362000050004F404F804EC04E804E404F004FCE9
+:1036300004A804AC04D804DC04A404A404A404E096
+:1036400004C004B804BC04B404CC04C804C404D04A
+:1036500004D404B0190103002200480200480E30CF
+:103660001420C81AD0180A0C050602030102000132
+:10367000CE0181010000C000800060003000180011
+:1036800010000800040002000100081828380C058A
+:10369000100A0200000000000301100A02000000EE
+:1036A0000000FBE0FBF209022700010200A0FA097A
+:1036B00004000003FF00000007058102400000072E
+:1036C00005010240000007058303020001220354A4
+:1036D0000055005300420033003400310030002018
+:1036E00000200020002000200020002000200000FA
+:0336F000000000D7
+:00000001FF
diff --git a/firmware/mts_gsm.fw.ihex b/firmware/mts_gsm.fw.ihex
new file mode 100644
index 00000000000..f6ad0cbd30c
--- /dev/null
+++ b/firmware/mts_gsm.fw.ihex
@@ -0,0 +1,867 @@
+:1000000014360002001E021AF9FFFFFFFFFF023341
+:100010001DFFFFFFFFFFFFFFFFFFFFFFFFFF02339B
+:10002000C87581CE90FDE88583A012353CEC4D600B
+:100030007378AB8003760018B89CFA787F800376DB
+:100040000018B865FA78208003760018B820FA788E
+:10005000208003760018B81FFA90FDDDAE83AF82D2
+:1000600090FBF81200AA6005E4F0A380F690FDE88A
+:10007000A88290FDE8A982E8696005E4F20880F7AB
+:100080009001081200B390010C1200B390011012FD
+:1000900000B39001141200D190011A1200D1900106
+:1000A000201200D175D00012341A020126EF6582A9
+:1000B0007003EE658322E493F8740193F97402935C
+:1000C000FE740393F5828E83E869700122E493F64F
+:1000D000A30880F4E493FC740193FD740293FE740E
+:1000E0000393FF740493F8740593F58288831200D8
+:1000F000AA700122E493A3A883A9828C838D82F045
+:10010000A3AC83AD828883898280E32121049B8014
+:1001100080049BACAE049BFDE8049D049DFBF304AE
+:10012000A2049DFBF30502050280FED0F030F00929
+:1001300020F303F68010F7800D30F10920F303F26D
+:100140008004F38001F020F404FCD0E0CC22CCC089
+:10015000E0120163020154BC0005D0F0ACF022C3F0
+:1001600013DCFC02012ABF0009ED258275F001F8BD
+:10017000E622BF010FED2582F582EE3583F583750A
+:10018000F004E022ED258275F002F8E222D083D05F
+:1001900082F5F0C3E493A3C5F095F0C0E0C3D0F0BE
+:1001A000E493A395F04012A3A3C3E5F033500205F6
+:1001B000832582F58250020583740193C0E0E493A5
+:1001C000C0E022D083D082F5F0E4937009740193EB
+:1001D0007004A3A3800C74029365F06005A3A3A32D
+:1001E00080E7740193C0E0E493C0E022120264024D
+:1001F00001FB1202B80201FB1202DC0201FB30E03B
+:100200000720E302E622E72230E10720E302E222B0
+:10021000E32230E202E022E493221202DC02022313
+:100220001202B8020223ABF012022DCBC5F0CB2292
+:1002300030E01020E306E6F5F008E622E7F5F009E5
+:10024000E7192230E11020E306E2F5F008E222E3AC
+:10025000F5F009E3192230E206E0F5F0A3E022E42C
+:1002600093F5F074019322BB0003740922BB0107CC
+:1002700089828A83740422BB020789828A8374106C
+:1002800022740A22020284BB0007E92582F8740165
+:1002900022BB010DE92582F582EA3583F5837404DA
+:1002A00022BB020DE92582F582EA3583F5837410BD
+:1002B00022E92582F87402220202B8BF0005EDF897
+:1002C000740122BF01078D828E83740422BF02074E
+:1002D0008D828E83741022EDF87402220202DCBF3C
+:1002E0000007ED2582F8740122BF010DED2582F58E
+:1002F00082EE3583F583740422BF020DED2582F56D
+:1003000082EE3583F583741022ED2582F874022283
+:10031000020310C0E0120264020328C0E01202B817
+:10032000020328C0E01202DC02032830E00B20E3C5
+:1003300004D0E0F622D0E0F72230E10B20E304D035
+:10034000E0F222D0E0F322D0E0F022C9CDC9CACE3B
+:10035000CACBCFCB12035BEDF9EEFAEFFB22BB0069
+:100360002FBF000AFAEDF8E7F60809DAFA22BF0112
+:10037000128D828E83F802037809A3E7F0D8FA225F
+:10038000020383FAEDF8E7F20809DAFA2202038D94
+:10039000BB014DBF001489828A83F9EDF802039FE7
+:1003A00008A3E0F6D9FA220203B0BF01228D828EA3
+:1003B00083FB08C9C582C9CAC583CAE0A3C9C5826F
+:1003C000C9CAC583CAF0A3DBEAD8E8220203D38DE9
+:1003D000828E83F9EDF8E0F208A3D9FA220203DD58
+:1003E000BB024DBF001289828A83F9EDF80203EF48
+:1003F00008A3E493F6D9F922BF01238D828E83FBF3
+:1004000008C9C582C9CAC583CAE493A3C9C582C93C
+:10041000CAC583CAF0A3DBE9D8E722020422898295
+:100420008A83F9EDF8E493F208A3D9F922020433A0
+:10043000BF000DFAEDF8E3F60809DAFA2202043DEE
+:10044000BF01128D828E83F802044A09A3E3F0D81B
+:10045000FA22020455FAEDF8E3F20809DAFA220268
+:10046000045FE6FB08E6FA08E6F904F618700106F0
+:1004700022E6FF08E6FE08E6FD22EFF0A3EEF0A379
+:10048000EDF022EBF0A3EAF0A3E9F022E0FFA3E015
+:10049000FEA3E0FD22E0FBA3E0FAA3E0F9220000C6
+:1004A00000000000000502006105710026059800AB
+:1004B000330A0900610A750066154400610CF900F1
+:1004C0006109A9006109E000610DC000610BF10044
+:1004D000610A1C00610A510061173C0033174F008C
+:1004E000341E1400431EBF0044202C0044201A0078
+:1004F000471EE600471F8B004D1FDC004F1F080002
+:100500005832A800617CCC7DFF121CC52290FFFCF4
+:10051000E020E72DC2AFAE59AF58755A20E55A1406
+:10052000C55A6019E4FE7F05EE4FCE24FFCECF34CE
+:10053000FFCF6007E490FF92F080ED80E08E598F4E
+:10054000582212050A7D077CB71232C47D0F7C6EDB
+:100550001232DE789D7A06E4F608DAFC7A06120595
+:10056000CD7C03120E55122168E4FEFF7C0F12327F
+:100570004DD2A822123138E490FC38F090FFF0E020
+:1005800030E408740190FC39F08005E490FC39F007
+:100590007D0A7C001225461231BB2212313890FCB4
+:1005A00039E014700E90FFF0E04410F07C0012254A
+:1005B000DF801990FC39E0700E90FFF0E054EFF00E
+:1005C0007C001225DF80057C171225DF1231BB224B
+:1005D00090FFF0E054ABF090FFF0E04420F0228C6C
+:1005E000378D367882EDF608ECF6EDFEECFD7F01F6
+:1005F0009000051201F57880F67882E6FD08E6FCA9
+:10060000EDFEECFD7F019000041201F5540FFC7D1E
+:100610008012176D7880E6700DAD3AAE39AF38E4D0
+:100620001203187C082290FFF0E054FEF090FFF0D7
+:10063000E054FDF0801E7882E6FD08E6FCEDFEEC5D
+:10064000FD7F0190000812021725E0440190FFF39E
+:10065000F00206D97882E6FD08E6FCEDFEECFD7FAF
+:100660000190000612021754FE90FFF3F0802B78E1
+:1006700082E6FD08E6FCEDFEECFD7F01900008122D
+:100680000217FAEB90FFF1F01208C8400DAD3AAE38
+:1006900039AF38E41203187C18227882E6FD08E6A8
+:1006A000FCEDFEECFD7F0190000812021790FFF1B7
+:1006B000F01208C8400DAD3AAE39AF38E412031855
+:1006C0007C18227882E6FD08E6FCEDFEECFD7F0159
+:1006D000900006120217440190FFF3F07883E6249D
+:1006E00003F618E63400F67880E624FE500990FF01
+:1006F000F0E054FDF0800790FFF0E04402F0E49059
+:10070000FFF1F0788176007880E624FFFCE434FF86
+:10071000FD7881E67F00FEECD39EEF6480CD64809F
+:100720009D402F1208AD400F7881E6AD3AAE39AF4B
+:10073000381203187C182290FFF2E0FC788286833E
+:10074000088682ECF0788106A37882A68308A682C8
+:1007500080B51208AD400F7881E6AD3AAE39AF38BA
+:100760001203187C182290FFF2E0FC78828683083E
+:100770008682ECF07880E6AD3AAE39AF38120318D5
+:100780007C00228C378D367882EDF608ECF6EDFE93
+:10079000ECFD7F019000051201F57881F67882E684
+:1007A000FD08E6FCEDFEECFD7F019000041201F572
+:1007B000540FFC7D8112176D7881E670037C08224E
+:1007C00090FFF0E054FEF090FFF0E054FDF0801B4D
+:1007D0007882E6FD08E6FCEDFEECFD7F0190000866
+:1007E00012021725E090FFF3F0805B7882E6FD08A7
+:1007F000E6FCEDFEECFD7F0190000612021754FEB0
+:1008000090FFF3F080217882E6FD08E6FCEDFEEC37
+:10081000FD7F01900008120217FAEB90FFF1F01231
+:1008200008C840037C18227882E6FD08E6FCEDFE4D
+:10083000ECFD7F0190000812021790FFF1F0120802
+:10084000C840037C18227883E6240AF618E63400B0
+:10085000F6788076007881E624FFFCE434FFFD78AA
+:1008600080E67F00FEECD39EEF6480CD64809D40E7
+:100870002178828683088682E090FFF1F01208C812
+:1008800040037C1822788006788306E618700106FB
+:1008900080C390FFF0E04401F0788286830886826E
+:1008A000E090FFF1F01208C840037C18227C00227F
+:1008B00090FFF0E020E71290FFF0E030E50990FFB4
+:1008C000F0E04420F0C32280E7D32290FFF0E02044
+:1008D000E31290FFF0E030E50990FFF0E04420F0F3
+:1008E000C32280E7D3228C428D417C00ED54F0FD81
+:1008F000EC7003ED64307005753E038003753E04B3
+:10090000AC3E120F72758300858340E541540FF5AC
+:100910003FE5407004E53F64037035E53E24FD7516
+:10092000F00AA42402F582E434FCF583E030E60505
+:100930001210598019E53E249DF8E654FBF678A97B
+:10094000E62405F58218E63400F583740FF080592B
+:10095000E5407004E53F64047048E53E24FD75F011
+:100960000AA42402F582E434FCF583E030E507AC08
+:1009700042AD41121C5AE54230E21578ADE630E056
+:100980000F78ADE630E109E4FF04FE7C0412324D3D
+:1009900078A9E62406F58218E63400F583740FF092
+:1009A0008007E4FC7DEE121C5AC203221231381279
+:1009B0000F7278A9E62406F58218E63400F583E084
+:1009C00090FC38F078A9E62405F58218E63400F5A5
+:1009D00083E090FC39F0C2037D027C0012254612B0
+:1009E00031BB221231387895ECF6EC249DF8E630D4
+:1009F000E1077C131225DF800F90FC39E0FD78952C
+:100A0000E6FC1213EF1225DF1231BB2212313878C7
+:100A100095ECF67D00120F121225DF1231BB221267
+:100A200031387895ECF6EC249DF8E630E2077C133B
+:100A30001225DF801B7895E6249DF8E620E1077CEF
+:100A4000121225DF800A7895E6FC1214131225DFB6
+:100A50001231BB221231387895ECF6EC249DF8E681
+:100A600020E2077C111225DF800A7895E6FC12153A
+:100A7000141225DF1231BB221231387895ECF612B0
+:100A80000F7278A9E62409F58218E63400F583E0B0
+:100A900090FC3FF078A9E6240AF58218E63400F5C8
+:100AA00083E090FC40F078A9E62403F58218E63450
+:100AB00000F583E0FC78A9E62404F58218E634000A
+:100AC000F583E0F56278A9E62402F58218E63400A1
+:100AD000F583E0F5638C61E4EC333354017895F6EB
+:100AE0006008E56230E1037895067895E690FC4170
+:100AF000F078A7E62402F58218E63400F583E0FDDD
+:100B0000A3E0540CFCED54E68C65F564E56130E53A
+:100B100003436501E56220E50EE561547F7008E559
+:100B20006120E703436502E56130E303436510E5B7
+:100B30006130E203436520E561540360034365408F
+:100B4000E56130E103436580E56130E4034364011E
+:100B5000E56130E603436408E56220E40EE5615494
+:100B60007F7008E56120E7034364105365FB53641D
+:100B7000F9AD64E56590FC3ACDF0A3CDF0E56330C6
+:100B8000E30DE5635430C4540F90FC3DF08005E460
+:100B900090FC3DF0E563540390FC3CF0E5635404A5
+:100BA000C31390FC3EF090FC3CE0700E7D357EFC63
+:100BB0007F01740190000912014B78A9E62408F521
+:100BC0008218E63400F583E07C00FD78A9E624076E
+:100BD000F58218E63400F583E07F004CFEEF4D907F
+:100BE000FC38F0A3CEF0CEC2037D0A7C001225466D
+:100BF0001231BB221231387895ECF6789A760108DA
+:100C000076FC0876387897760C789A12046E120281
+:100C10001D7898CBF6CB08F67F00EF24EA401FE45E
+:100C2000EF25E090357EFD93CD04937899667003AF
+:100C3000ED186670067897760080030F80DC789652
+:100C4000EFF6789A12046E9000021202177898CB91
+:100C5000F6CB08F65404CB54064B60047897760B19
+:100C60007899E630E313789A12046E900005120129
+:100C7000F524FB50047897760D7899E654C07D00F2
+:100C800064C04D70047897760B789A12046E9000C9
+:100C9000041201F524FC50047897760F789A120418
+:100CA0006E9000061201F524FD50047897760E78B8
+:100CB0009A12046E9000091201F524FD50047897F1
+:100CC000760A7897E6702A7895E6FC120F72789A81
+:100CD00012046E78A7E6F978A6E6FA7B01740A7822
+:100CE00000120348C2037895E6FC1211157897ECC0
+:100CF000F67897E6FC1225DF1231BB2212313878E4
+:100D000095ECF6120F727895E624FD75F00AA4248E
+:100D100014F582E434FCF583AC82AD8378A6868337
+:100D2000088682ECF9EDFA7B0A78011203B0C2035F
+:100D30007895E6FC1211151231BB228D2B8C2AED11
+:100D400060407527017529487528FFE52A24FDFCB8
+:100D5000E434FFFDEC7C0325E0CD33CDDCF9FCE58C
+:100D6000292CF529E5283DF528AD29AE28AF2774B3
+:100D7000809000061203207480900002120320125B
+:100D80000FC5E52B14603B7527017529087528FFF1
+:100D9000E52A24FDFCE434FFFDEC7C0325E0CD33A3
+:100DA000CDDCF9FCE5292CF529E5283DF528AD2910
+:100DB000AE28AF27E4900006120320E49000021250
+:100DC0000320221231387895ECF6EC249DF8E630B9
+:100DD000E2097895E6FC121514D2007895E6FC122B
+:100DE0000F727896760090FC39E030E704789676BA
+:100DF000017896E6FD7895E6FC120D38C2033000C6
+:100E0000077895E6FC1214137C001225DF1231BB23
+:100E10002278A9E62404F58218E63400F583E0443C
+:100E200001F078A9E62404F58218E63400F583E0A1
+:100E300030E00280ED78A9E6240BF58218E6340054
+:100E4000F583E054F8F078A9E62402F58218E63438
+:100E500000F583E04480F022C2038C58120F7278B0
+:100E6000A6868308868279AF7A357B0A78011203D9
+:100E7000FE120E0EAC587D02120D38C203AC581291
+:100E80001115228D538E528F518C50120F72754F47
+:100E90000078A9E62405F58218E63400F583E02001
+:100EA000E41FE54F24F64019054FC2037C181232A7
+:100EB000FB90FF93E04401F0B2B3AC50120F72808C
+:100EC000D078A9E62405F58218E63400F583E02001
+:100ED000E405C2037C022278A9E62405F58218E61F
+:100EE0003400F583E0540F601678A9E62405F582F6
+:100EF00018E63400F583E0540FF0C2037C01227839
+:100F0000A88683088682E0AD53AE52AF5112031813
+:100F1000C2037C00228D318C30121514E531600F34
+:100F2000E530B4030A7C0112250E7C8112250EAC3B
+:100F300030120F72E531601A78AA8683088682E043
+:100F400054E7F0A3A3A3A3E054E7F0AC307D021272
+:100F50000D3878A6868308868279B97A357B0A7837
+:100F6000011203FEC203E530249DF8E654FDF6AC01
+:100F700030121115228C2630030512329A80F87C2B
+:100F80000A1231ADD203E52624FD78A3F670077866
+:100F9000AA76FF0876E078A3E67D007C0425E0CD04
+:100FA00033CDDCF9FC24A078A9F6ED34FF18F678EF
+:100FB000A3E675F00AA42400FCE434FCFD78A6ED59
+:100FC000F608ECF61232462278A9E62402F58218D9
+:100FD000E63400F583E030E72278A9E62402F582C2
+:100FE00018E63400F583E0547FF078A9E62402F592
+:100FF0008218E63400F583E04480F02278AA8683E4
+:10100000088682E0547FF0AD83E5822404FCE43D51
+:101010008C82F583E0547FF078A9E6240BF58218E2
+:10102000E63400F583E054F8F078ABE62401F5826D
+:1010300018E63400F583E04403F078ABE62405F5C8
+:101040008218E63400F583E04403F078A9E624052D
+:10105000F58218E63400F583740FF02278AA8683AF
+:10106000088682E0543FF0AD83E5822404FCE43D31
+:101070008C82F583E0543FF078A3E624A4F8E6FCE4
+:1010800078ABE62401F58218E63400F583ECF078BD
+:10109000A3E624A4F8E6FC78ABE62405F58218E67E
+:1010A0003400F583ECF078A9E6240BF58218E634D9
+:1010B00000F583E054FB4402F52678A7E62402F508
+:1010C0008218E63400F583E030E50343260178A971
+:1010D000E62405F58218E63400F583E030E00312DB
+:1010E0000FC5E526FC78A9E6240BF58218E6340046
+:1010F000F583ECF078A9E62405F58218E63400F5CE
+:1011000083740FF078AA8683088682E04480F0A377
+:10111000A3A3A3E04480F0228C2A120F7278A7E6E2
+:101120002408F58218E63400F583E0FC78A9E6246B
+:101130000AF58218E63400F583ECF078A7E6240778
+:10114000F58218E63400F583E0FC78A9E62409F579
+:101150008218E63400F583ECF078A6868308868250
+:10116000E0FDA3E0FCEDFE78A9E62408F58218E690
+:101170003400F583EEF0ECFE78A9E62407F582183A
+:10118000E63400F583EEF08C298D28C3EC9405ED50
+:10119000940C400575277C8033D3E5299401E5281C
+:1011A0009403400575273C8023D3E5299481E528E5
+:1011B000940140057527188013D3E5299460E5282C
+:1011C0009400400575270C8003752708AF27E4EFCE
+:1011D000547C4483FF8F27E527FC78ABE62401F598
+:1011E0008218E63400F583ECF0E527FC78ABE624C2
+:1011F00005F58218E63400F583ECF0E527FC78A3CA
+:10120000E624A4F8ECF678A9E62402F58218E63480
+:1012100000F583E0F52778A7E62402F58218E63486
+:1012200000F583A3E030E3175327C778A7E624052A
+:10123000F58218E63400F583E09035AA93422778CA
+:10124000A7E62402F58218E63400F583E030E705CE
+:1012500043274080035327BF5327FB78A7E6240684
+:10126000F58218E63400F583E06003432704532732
+:10127000FC78A7E62404F58218E63400F583E04202
+:1012800027432780E527FC78A9E62402F58218E6A3
+:101290003400F583ECF078A9E62404F58218E634EE
+:1012A00000F583E0F52778A7E62402F58218E634F6
+:1012B00000F583A3E030E1055327DF8003432720B7
+:1012C00078A7E62402F58218E63400F583E030E4DE
+:1012D000055327EF800343271078A7E62409F582FA
+:1012E00018E63400F583E0B40203432702E527FC47
+:1012F00078A9E62404F58218E63400F583ECF0784A
+:10130000A9E62403F58218E63400F583E0F5277892
+:10131000A7E62409F58218E63400F583E07005534A
+:10132000277F800343278078A7E62402F58218E60A
+:101330003400F583A3E030E00543272080035327E2
+:10134000DF78A7E62402F58218E63400F583E03062
+:10135000E30543274080035327BF78A7E62402F51F
+:101360008218E63400F583E030E00543271080035F
+:101370005327EF78A7E62402F58218E63400F583B8
+:10138000A3E030E40543270880035327F778A7E656
+:101390002402F58218E63400F583A3E030E5054326
+:1013A000270480035327FB78A7E62402F58218E67A
+:1013B0003400F583A3E030E605432701800353277B
+:1013C000FE78A7E62402F58218E63400F583A3E050
+:1013D00030E70543270280035327FDE527FC78A962
+:1013E000E62403F58218E63400F583ECF0C2037CB2
+:1013F00000228D278C26ED54031460037C1022E517
+:1014000027547C24FC40037C0B22E526249DF8E62F
+:101410004402F67C00228C30120F72E530249DF8D5
+:10142000E620E24FAC307D02120D38E53024FE4458
+:1014300028FC78AA8683088682ECF0AF83E58224B4
+:1014400004FEE43FFFEC8E828F83F07C038C2CE55E
+:101450002CFC78ABE62401F58218E63400F583EC29
+:10146000F0E52CFC78ABE62405F58218E63400F5AF
+:1014700083ECF0752D01752F48752EFFE53024FDA6
+:10148000FCE434FFFDEC7C0325E0CD33CDDCF9FC3E
+:10149000E52F2CF52FE52E3DF52E78ABE62404F54F
+:1014A0008218E63400F583E054E7F52CAD2FAE2E1C
+:1014B000AF2DE4900002120320E4900006120320F6
+:1014C0001201EF30E503432C10E52CFC78ABE62449
+:1014D00004F58218E63400F583ECF012105978A96F
+:1014E000E62406F58218E63400F583E0C203FCE545
+:1014F00030249DF8E64404F68C2CE530540FC45497
+:10150000F07E00FFEEEF44047D00FFEC4EFCED4F5B
+:10151000FD121CC57C00228C2F120F72120FF9785D
+:10152000AA8683088682E05408F0A3A3A3A3E0540C
+:1015300008F0AC2F7D02120D38C203E52F249DF870
+:10154000E654FBF67C00221231387896ECF6EC2457
+:101550009DF8E630E10A7D007C131225461231BB6E
+:101560007896E6249DF8E64401F67896E6FC120F9C
+:10157000727896E624FD75F00AA42414F582E4340A
+:10158000FCF58378A6E6FA08E6F97B0A78011203EF
+:10159000B078A6868308868279B97A357B0A780185
+:1015A0001203FE120FC5C2037896E6FC12111578DD
+:1015B00095ECF6EC600A7D007C081225461231BBE2
+:1015C0007896E6FC120F7278A9E62404F58218E6F4
+:1015D0003400F583E0441054DFFC78A9E62404F5D8
+:1015E0008218E63400F583ECF07895ECF6C2037CC3
+:1015F000C81232FB7896E6FC120F7278A9E6240432
+:10160000F58218E63400F583E054EFF0C2037CC89D
+:101610001232FB7896E6FC120F7278A9E62404F5E4
+:101620008218E63400F583E04410F0C2037CC8124F
+:1016300032FB7896E6FC120F7278A9E62404F58254
+:1016400018E63400F583E04420F0C2037CF0123247
+:10165000FB7896E6FC120F7278A9E62405F582184D
+:10166000E63400F583E030E415C2037896E64410D2
+:101670007F00FE7C0712324D1231BB02173B78A966
+:10168000E62404F58218E63400F583E054CFF0C276
+:10169000037CC81232FB7896E6FC120F7278A9E63A
+:1016A0002404F58218E63400F583E04430F0C203E8
+:1016B0007CF01232FB7896E6FC120F7278A9E624D1
+:1016C00005F58218E63400F583E030E414C20378AF
+:1016D00096E644107F00FE7C0712324D1231BB802B
+:1016E0005D78A9E62404F58218E63400F583E05419
+:1016F000EFF078A9E62404F58218E63400F583E0DB
+:1017000054DFF07896E624FD75F00AA42414F582DF
+:10171000E434FCF583AC82AD8378A68683088682A8
+:10172000ECF9EDFA7B0A78011203B0C2037896E671
+:10173000FC1211157D007C0B1225461231BB2212C2
+:101740003138E490FC39F07D027C001225461231DC
+:10175000BB221231387C001225DF1231BB22743CCF
+:1017600090FBE0F0743E90FBE0F0E490FC28F02267
+:101770008D358C34ECB401028003D340028028B450
+:1017800002028003D34008A835E625E0F68018B4AD
+:1017900004028003D3400AA835E625E025E0F68060
+:1017A00006A83576008000228C3C8D3BEDFEECFDDA
+:1017B0007F0175660675670090FC29120477120197
+:1017C000EFB480028006D3500302186E90FC2912F9
+:1017D00004899000031201F554F0B430028003D361
+:1017E000405F90FC29120489900008120217FAFD4C
+:1017F000EBFE7F0190FC2C120477EECD9035C3FCFC
+:10180000E493FF740193FEF9EFFA7B01EAFFE9FE2E
+:10181000ECC39EED9F40259035C5E493FD74019384
+:10182000FCEDFEECFD7F01EECDFC90FC2EE0D39CA8
+:1018300090FC2DE09D5005756680803312198C80D8
+:101840002EB460028003D3400BAC3CAD3B1207804A
+:101850008C66801BB41003B34010C3B42003B340A4
+:1018600009C3B440028003D34000756681800080C4
+:1018700075B481028003D3406B90FC2912048990D7
+:1018800000031201F554F0B430028003D3401D90E0
+:10189000FC29120489900008120217FAFDEBFE7F62
+:1018A0000190FC2F1204771218F68036B460028083
+:1018B00003D34013753A67E4F539F538AC3CAD3BDA
+:1018C0001205DC8C66801BB41003B34010C3B42037
+:1018D00003B34009C3B440028003D340007566815E
+:1018E000800080028000E566FC90FC29120489ECEF
+:1018F000900002120320AC672290FC291204899008
+:1019000000041201F5600474018001E4A2E0920178
+:1019100090FC29120489ED2403FD50010E90FC2C4B
+:1019200012047790FC291204899000051201F5F544
+:10193000679000041201F5540FFC7D6712176DE5E6
+:10194000677004756608227566007884760078846E
+:10195000E6C39567503890FC2F1204891201EFFC02
+:1019600090FC2C120489EC12031830010E90FC310B
+:10197000E004F090FC307003E004F078840690FC02
+:101980002EE004F090FC2D7003E004F080C0229063
+:10199000FC2AE0FDA3E0FCEDFEECFD7F01ED240A56
+:1019A000FD50010E90FC3212047790FC291204893C
+:1019B0009000041201F5540FB401028003D34017C4
+:1019C00090FC321204890DED70010E90FC2F120470
+:1019D0007778887601804EB402028003D340199054
+:1019E000FC32120489ED2402FD50010E90FC2F12EE
+:1019F000047778887602802DB404028003D34019DE
+:101A000090FC32120489ED2404FD50010E90FC2F4D
+:101A100012047778887604800CB400028003D340E7
+:101A2000007566082290FC291204899000051201B5
+:101A3000F5F567788576007885E6C39567400302FB
+:101A40001AF4788676007886E6C378889650769081
+:101A5000FC2C1204891201EFFC90FC321204921249
+:101A600001E9F45CFC1201E9F890FC2F120489E80A
+:101A7000C0E01201EFC8D0E0C8584CFC90FC2C121A
+:101A80000489EC1203187887ECF690FC31E004F03E
+:101A900090FC307003E004F009E970010A90FC3218
+:101AA00012048090FC291204899000041201F53080
+:101AB000E40E90FC2EE004F090FC2D7003E004F0A6
+:101AC00078860680817888E6FDE4FEFFEECDFC9006
+:101AD000FC31E02CF090FC30E03DF07888E6FDE44D
+:101AE000FEFFEECDFC90FC34E02CF090FC33E03DAA
+:101AF000F0788506021A347566002222C0E0C0F034
+:101B0000C082C083C0D0E8C0E0E9C0E0EAC0E0EB3A
+:101B1000C0E0ECC0E0EDC0E0EEC0E0EFC0E090FF60
+:101B200092E01201C01B47301B47321B56381B681E
+:101B30003A1B7A3E1B92441B86461B9E501BE0526A
+:101B40001BBF541C015600001C2290FF92E07F0036
+:101B5000FE7C0112324D021C32E4FF04FE7C0312B3
+:101B6000324D742090FFFEF0021C32E4FF04FE7C34
+:101B70000212324D744090FFFEF0021C32E4FF046A
+:101B8000FE7C0412324D021C32E4FF04FE7C05127E
+:101B9000324D021C32E4FF04FE7C0612324D021C60
+:101BA0003290FFA5E07D0090FBF8CDF0A3CDF09042
+:101BB000FBF9E0FCF58390FBF8E04433FD121CC513
+:101BC000807390FFB5E07D0090FBFACDF0A3CDF0DF
+:101BD00090FBFBE0FCF58390FBFAE04443FD121C14
+:101BE000C5805290FFA6E07D0090FBFCCDF0A3CD18
+:101BF000F090FBFDE0FCF58390FBFCE04434FD122B
+:101C00001CC5803190FFB6E07D0090FBFECDF0A3B7
+:101C1000CDF090FBFFE0FCF58390FBFEE04444FD3B
+:101C2000121CC5801090FF92E07D00FCED44AAFDDF
+:101C3000121CC58000E490FF92F0D0E0FFD0E0FEDF
+:101C4000D0E0FDD0E0FCD0E0FBD0E0FAD0E0F9D06D
+:101C5000E0F8D0D0D083D082D0F0D0E0320581053A
+:101C60008105810581A881181818EDF608ECF69019
+:101C7000FF5AE020E70280F790FF59E07D00A8813D
+:101C800018CDF6CD08F67D03A881E618FCE6CC2534
+:101C9000E0CC33CCDDF9CCF6CC08F6A88118E644CC
+:101CA000F8F6A881181818E6FD08E6FCA881188641
+:101CB00083088682EDF0A3ECF0740290FF5AF015D1
+:101CC0008115811581158122E5812405F581E4A81E
+:101CD0008118F6A88118181818EDF608ECF690FB94
+:101CE000F5E024F85003021DE6E4A8811818F6A8D0
+:101CF0008118E6FEA88118181818E6FD08E6FC7F92
+:101D000000EF24F8404DE4EF25E0247DF582E43433
+:101D1000FCF583E0FBA3E06C7003FAEB6D700974D3
+:101D200001A8811818F6802BE4EF25E0247DF582C8
+:101D3000E434FCF5837A00E054F0CCF8CCCDF9CD56
+:101D4000FB7800E954F0F9EA687002EB6970010E63
+:101D50000F80AEA88118EEF6A88118181818EDF6B5
+:101D600008ECF6A881EFF6A8811818E67079A8812A
+:101D700018E624F74071A88118181818E6540FA81F
+:101D800081F664046017A881E664036010A88118D6
+:101D9000181818E6FD08E6FC121C5A804A7C0A1244
+:101DA00031ADA88118181818E6FD08E6FC90FBF480
+:101DB000E025E0247DF582E434FCF583EDF0A3EC2E
+:101DC000F090FBF4E0FFE4EF045407FF90FBF4F025
+:101DD00090FBF5E004F012324690FBF6E07008E468
+:101DE000FEFF7C0F12324D802790FBF7E004F05489
+:101DF0003F701D90FBF7E044FE7D00FC90FBF4E09B
+:101E000025E0247DF582E434FCF583EDF0A3ECF0CD
+:101E1000E58124FBF58122788B7600788C7600743E
+:101E20000190FBF6F012313890FBF5E060577C0A28
+:101E30001231AD90FBF3E025E0247DF582E434FC23
+:101E4000F583E0FDA3E0FC90FBF3E025E0247DF5C5
+:101E500082E434FCF583E4F0A3F090FBF3E0FFE4CC
+:101E6000EF045407FF90FBF3F090FBF5E014F078DB
+:101E700089EDF608ECF61232467889E6FD08E6FCB4
+:101E80001208E380A312329A90FF93E04401F0B26B
+:101E9000B3788B06B60011788B7600788CE6F40464
+:101EA00004A2E092B4788CF6021E25E490FBF6F0D2
+:101EB00090FBF5E07D00FCED44CFFD121C5A123181
+:101EC000BB22123138E5706449456F601590FF837D
+:101ED000E0540F7D00D39570ED956F5005122F8162
+:101EE00080031230511231BB22123138E57064493F
+:101EF000456F600512308B800E90FF80E04408F043
+:101F000090FF83E0547FF01231BB221231388C54A1
+:101F1000EC54F0B41015756A357569FC756801E507
+:101F20006A2403F56AE5693400F569E4F557F55666
+:101F3000E556C394015027E554540FFCAD6AAE69D1
+:101F4000AF68120E808C55EC60028012056AE56A5B
+:101F5000700205690557E5577002055680D2E554B1
+:101F6000540F249DF8E654FEF6E554540F7F00FE0E
+:101F70007C1212324DE5551470097D007C09122542
+:101F8000468007AD577C001225461231BB22123124
+:101F90003890FFFCE04402F090FF00E030E713903F
+:101FA000FF83E04480F0436D8090FFFCE04401F04B
+:101FB000801190FF82E04408F0536D7F90FFFCE0B9
+:101FC00054FEF090FF81E04480F01225F990FFFE6E
+:101FD000E04405F090FFFCE054FDF01231BB22120A
+:101FE00031387C011232FB78ADE64402F674FEFC17
+:101FF00004FD121CC590FF5AE030E70280F7E4F5BB
+:102000004E754D10AC4EAD4DE54E154E7002154D52
+:10201000EC4D600280EE4387011231BB2212313851
+:102020007C021231C778ADE654FDF61231BB2212A4
+:10203000313878ADE630E02C78ADE630E12678AD89
+:10204000E6FCF58318E644F0FD121C5A90FFFCE014
+:102050004420F07C021232FB78ADE654FDF6741A8F
+:1020600090FFFEF078ADE6FCF58318E644F1FD1232
+:102070001C5A1231BB22756D0090FFFFE0600343D4
+:102080006D01756E00E4F56CF56BE4F56F757049E4
+:10209000748490FF82F0748490FF80F0748090FFCD
+:1020A00058F0748090FF5AF0AD46AF457E00EE24A4
+:1020B000FE5003022142E4EE75F007A4247FF5826E
+:1020C000E434F8F583E0FFE4EF5480FDE4EF540FCF
+:1020D00014FFED6038E4EF75F008A42448F582E4BD
+:1020E00034FFF5837490F0E4EF75F008A4244AF50A
+:1020F00082E434FFF5837480F0E4EF75F008A424E3
+:102100004EF582E434FFF5837480F08034E4EF759B
+:10211000F008A42408F582E434FFF5837490F0E419
+:10212000EF75F008A4240AF582E434FFF583E4F0A7
+:10213000E4EF75F008A4240EF582E434FFF583E49F
+:10214000F00E0220AB8D468E448F45747F90FFFDCC
+:10215000F0749090FFFCF0228C58EC24F65006E5C9
+:10216000582437FC22E5582430FC22D2B0122543F3
+:10217000EC700302227E755C03AE5B7F00E55C15AC
+:102180005C6480247F5035EF2400F582E434FBF555
+:1021900083E0FE24FE501EEF7D00FCE4FB7474C35C
+:1021A0009CFAEB9DFBEE7D00FCEAC39CED6480CBCA
+:1021B00064809B50028005EF2EFF80C18E5B8F5A9A
+:1021C000E55C6480247F500302227EE55A248E5011
+:1021D0000302227E855A5D755B00AE5AAF5B903577
+:1021E000EEE493F55CE55C155C6480247F5018EEAA
+:1021F0002400F582E434FBF583E0FCEF9035EE93A8
+:102200006C70040E0F80DE8E5A8F5BE55C64802458
+:102210007F406E755E017560E8755FFFE55D2402C5
+:10222000F55A755C07E55C334057AD60AE5FAF5E55
+:10223000E55CF5823395E0F5831201F5C4540FFC9B
+:10224000122155E55A2400F582E434FBF583ECF0C5
+:10225000055A055AAD60AE5FAF5EE55CF582339519
+:10226000E0F5831201F5540FFC122155E55A2400C4
+:10227000F582E434FBF583ECF0055A055A155C80D1
+:10228000A4740290F851F090F86B79C77A357B27E7
+:1022900078011203FE756A357569FC756801E49072
+:1022A000FF83F0748090FF81F0755902E55975F055
+:1022B00007A4247FF582E434F8F583E0788FF6FCF8
+:1022C000540F14FC788FECF6E55975F007A42481BF
+:1022D000F582E434F8F583E0789276FD0876E8FC40
+:1022E000788FE675F008A42448F582E434FFF5837E
+:1022F000E4F0788FE675F008A4244FF582E434FF0B
+:10230000F583ECF07892E6FF08E67E03CFC313CFA7
+:1023100013DEF9FE788FE675F008A42449F582E40F
+:1023200034FFF583EEF0788FE675F008A4244AF5C3
+:1023300082E434FFF5837480F07890ECF67D0078C9
+:1023400093E62CF618E63DF67892E6FD08E67C0367
+:10235000CDC313CD13DCF9FC788FE675F008A42407
+:102360004DF582E434FFF583ECF0788FE675F008E4
+:10237000A4244EF582E434FFF583E4F07892E6FD80
+:1023800008E6FC788FE6FF7E00EE24FE5003022470
+:10239000FDE4EE75F007A4247FF582E434F8F583BC
+:1023A000E0FFE4EF5480FAE4EF540F14FFE4EE751D
+:1023B000F007A42481F582E434F8F583E07890F600
+:1023C000E4EE1313548024F0F8E434FDF9E8FCE95A
+:1023D000FD8A5AEA700302246AE4EF75F008A42427
+:1023E00048F582E434FFF583E4F07890E6FAE4EF10
+:1023F00075F008A4244FF582E434FFF583EAF0ED8C
+:10240000FBEC7A03CBC313CB13DAF9FAE4EF75F0E4
+:1024100008A42449F582E434FFF583EAF07890E6D5
+:102420007B00FAEC2AFCED3BFDFBEC7A03CBC313FB
+:10243000CB13DAF9FAE4EF75F008A4244DF582E441
+:1024400034FFF583EAF0E4EF75F008A4244AF5823E
+:10245000E434FFF5837480F0E4EF75F008A4244EB3
+:10246000F582E434FFF5837480F00224F9E4EF751B
+:10247000F008A42408F582E434FFF583E4F07890B2
+:10248000E6FAE4EF75F008A4240FF582E434FFF5D2
+:1024900083EAF0EDFBEC7A03CBC313CB13DAF9FA42
+:1024A000E4EF75F008A42409F582E434FFF583EA2B
+:1024B000F07890E67B00FAEC2AFCED3BFDFBEC7A31
+:1024C00003CBC313CB13DAF9FAE4EF75F008A424B5
+:1024D0000DF582E434FFF583EAF0E4EF75F008A42B
+:1024E000240AF582E434FFF583E4F0E4EF75F008A4
+:1024F000A4240EF582E434FFF583E4F00E02238673
+:102500008E597892EDF608ECF6788FEFF61220737C
+:10251000228C26EC30E718E526540F1475F008A439
+:102520002448F582E434FFF583E054DFF08016E5BB
+:1025300026540F1475F008A42408F582E434FFF53E
+:1025400083E054DFF0227C0022EC90FC37F08C24F6
+:10255000ED2403F5257D00D39572ED95714003853B
+:102560007225E52524B75009752503740290FC37C0
+:10257000F0AC2512307622E4F56CF56B12257D2245
+:1025800090FC35E06573600E740490FC37F0E4F560
+:102590006B756C0380467D73E4FEFF79357AFC7BB6
+:1025A0000174057800120348E56C2403F56CE56BB3
+:1025B0003400F56BE56CD39572E56B95714006853B
+:1025C000726C85716BD3E56C9448E56B9400400C9C
+:1025D000740290FC37F0E4F56B756C03AC6C123050
+:1025E0007622EC90FC37F0E4F56CF56B8C32EC6005
+:1025F0000512306780057C001230762290FF93E050
+:102600004401F0B2B390FF04E0F54A90FF06E0FD0C
+:10261000A3E0ED7D00FC7D00FC90FF06E0FFA3E061
+:102620007E00FFE4FEEC4EFCED4FFDC3EC9448ED64
+:102630009400502290FF06E0FDA3E0ED7D00FC7DBC
+:1026400000FC90FF06E0FFA3E07E00FFE4FEEC4EFE
+:10265000FCED4FFD8004E4FD7C488C728D7190FF91
+:1026600002E0FDA3E0ED7D00FC7D00FC90FF02E0B8
+:10267000FFA3E07E00FFE4FEEC4EF54CED4FF54B82
+:10268000756A357569FC7568017D357EFC7F017959
+:1026900073E4FAFB74057800120348754900E549B4
+:1026A00024FE4019AD6AAE69AF68E412031805490B
+:1026B0000DED70010E8D6A8E698F6880E1756A3547
+:1026C0007569FC75680190FF00E05460B4000280F9
+:1026D00006D35003022CBFE54A540FF549E54A548E
+:1026E00080A2E0920290FF01E012018A000B2CBA56
+:1026F000270528232CBA292F2CBA2A122A462BADBB
+:102700002BB02BF02C632C91E56D30E70EE54C459A
+:102710004B7008E572640245716003022CBC90FFA7
+:1027200000E0541FB400028003D34029E54A60034F
+:10273000022820AD6AAE69AF68740112031878AD43
+:10274000E630E00BAD6AAE69AF6874021203187C24
+:102750000212307622B401028003D3401BE56D20C3
+:10276000E107E54A6003022820E54A24FE500302FF
+:1027700028207C0212307622B402028006D3500355
+:1027800002281EE56D20E10DE54A6009E54A6480F6
+:102790006003022820AC4A1230FD4003022820E5E5
+:1027A00049702530021190FF80E05408AD6AAE698F
+:1027B000AF68120318800F90FF82E05408AD6AAE34
+:1027C00069AF68120318803D154930021DE549754F
+:1027D000F008A42448F582E434FFF583E05408AD02
+:1027E0006AAE69AF68120318801BE54975F008A44A
+:1027F0002408F582E434FFF583E05408AD6AAE693D
+:10280000AF68120318AD6AAE69AF681201EF600BD2
+:10281000AD6AAE69AF6874011203187C021230769B
+:10282000228000022CBCE56D20E706E57245716050
+:1028300003022CBC90FF00E0541FB400028003D3BD
+:10284000401AE54C14454B7004E54A600302292CFC
+:1028500078ADE654FEF67C0012307622B401028098
+:1028600003D3402AE56D20E108E56D20E00302294D
+:102870002CE56D30E004E54A700BE56D30E109E5CB
+:102880004A24FE500302292C7C0012307622B40226
+:10289000028006D3500302292AE54C454B6003020F
+:1028A000292CAC4A1230FD400302292CE56D20E1B1
+:1028B00007E56D20E0028077E56D30E006E54960D0
+:1028C00002806CE549700F90FF82E054F7F090FFB2
+:1028D00080E054F7F022E549B401028003D34009B7
+:1028E0007D017C03120F128011B402028003D340D9
+:1028F000097D017C04120F1280001549300215E594
+:102900004975F008A42448F582E434FFF583E054C7
+:10291000F7F08013E54975F008A42408F582E43443
+:10292000FFF583E054F7F07C00123076228000023D
+:102930002CBCE56D20E706E57245716003022CBCF6
+:1029400090FF00E0541FB400028003D3401AE54C0E
+:1029500014454B7004E54A6003022A0F78ADE64443
+:1029600001F67C0012307622B401028003D34029A4
+:10297000E56D20E108E56D20E003022A0FE56D30EA
+:10298000E004E549700BE56D30E108E54924FE50AF
+:1029900002807F7C0012307622B402028003D34092
+:1029A0006FE54C454B60028069AC4A1230FD400235
+:1029B0008060E56D20E107E56D20E0028054E54987
+:1029C000701430020990FF80E04408F0800790FF07
+:1029D00082E04408F022E56D30E1331549300215FC
+:1029E000E54975F008A42448F582E434FFF583E056
+:1029F0004408F08013E54975F008A42408F582E442
+:102A000034FFF583E04408F07C0012307622800227
+:102A10008000022CBCE56D20E712E5724571700C58
+:102A2000E54A700890FF00E0541F6003022CBCE5EB
+:102A30004C90FFFFF090FFFFE06005436D018003C5
+:102A4000536DFE7C0012307622E56D30E70EE572A4
+:102A50004571600890FF00E0541F6003022CBCAD7C
+:102A60004BE54CED7D00FC7D00FCBD0002800302C7
+:102A70002BA8B401028003D34032E54A7005E54C2F
+:102A8000FC6003022BAA756A407569F8756801D36A
+:102A9000E5729412E57194004006E4FD7C12800416
+:102AA000AC72AD718C708D6F12308B22B4020280CB
+:102AB00003D34059E54A6003022BAAE54CFC70277A
+:102AC000756A527569F8756801D3E5729419E571F4
+:102AD00094004006E4FD7C198004AC72AD718C70EA
+:102AE0008D6F12308B8025756A6B7569F87568017A
+:102AF000D3E5729427E57194004006E4FD7C2780BD
+:102B000004AC72AD718C708D6F12308B22B40302E5
+:102B10008006D35003022BA8E54CF549700F90FFB7
+:102B200004E0FDA3E04D6003022BAA801890FB0295
+:102B3000E0FDA3E0FC90FF05E06C700790FF04E06F
+:102B40006D60028068E4F570F56F7F00E54914C59B
+:102B500049600FEF2400F582E434FBF583E02FFF9A
+:102B600080EA8F4AE54A2400F582E434FBF583E0ED
+:102B70007D00D39572ED95714006AC72AD71800FFA
+:102B8000E54A2400F582E434FBF583E07D00FC8C0B
+:102B9000708D6FE54A2400FCE434FBFDFEECFD7F04
+:102BA000018D6A8E698F6812308B228000022CBCE6
+:102BB000022CBCE56D30E719E5721445717012E521
+:102BC0004A700EE54C454B700890FF00E0541F60C2
+:102BD00003022CBCE56D20E008E56D20E103022C2A
+:102BE000BC756A6EE4F569F568E4F56F04F570127A
+:102BF000308B22E56D20E727E57245717021E54AAB
+:102C0000701DE54C6402454B600DE54C14454B606E
+:102C100006E54C454B700890FF00E0541F6003022E
+:102C20002CBCE56D20E008E56D20E103022CBC859D
+:102C30004C6EE56E700A436D01536DFDD2B080207D
+:102C4000E56E64026007E56E1460028072536DFEEB
+:102C5000436D02E56E64026005E56E147002C2B059
+:102C60007C0012307622E56D30E71AE5721445716A
+:102C70007013E54A700FE54C454B700990FF00E07A
+:102C8000541F1460028038E56D20E10280317C0120
+:102C900012307622E56D20E715E5724571700FE57B
+:102CA0004C454B700990FF00E0541F146002800FE8
+:102CB000E56D20E10280087C00123076228000025F
+:102CC0002F7DB440028006D35003022F7390FF0182
+:102CD000E090FC35F0E54A90FC36F0E490FC37F0EB
+:102CE000E56A2403F56AE5693400F569AD4BE54C06
+:102CF000856A82856983CDF0A3CDF090FF01E01253
+:102D000001C02D2A012D50022D7A032DA4042DF28D
+:102D1000052E2F062E55072E7B082EA7092ECD0B2C
+:102D20002EF30C2F02802F028100002F60E56D2012
+:102D3000E7067C051225DF227D767E357F02793815
+:102D40007AFC7B01740878001203487D087C00122D
+:102D5000254622E56D20E7067C051225DF22E54A9F
+:102D6000B403004010B40500500BE54A7F00FE7C20
+:102D70001012324D227D007C0712254622E56D207F
+:102D8000E7067C051225DF22E54AB403004010B4B3
+:102D90000500500BE54A7F00FE7C1112324D227D6A
+:102DA000007C0712254622E56D20E7067C051225EA
+:102DB000DF22E54AB405028003D3400AE4FF04FEA3
+:102DC0007C0A12324D22B401028003D3400AE4FF90
+:102DD00004FE7C0812324D22B403004010B40500FA
+:102DE000500BE54A7F00FE7C1312324D227D007CA1
+:102DF0000712254622E56D20E734D3E5729448E5B5
+:102E00007194005006E572457170067C021225DF50
+:102E100022E54AB40103B3400BC3B403004009B434
+:102E200006005004123123227C071225DF221225CE
+:102E30007D22E56D20E71DE54AB403004010B4058E
+:102E400000500BE54A7F00FE7C1612324D227C07B3
+:102E50001225DF2212257D22E56D20E71DE54AB40B
+:102E600003004010B40500500BE54A7F00FE7C19BA
+:102E700012324D227C071225DF2212257D22E56DBC
+:102E800020E723748190FF93F0E54AB403004010DB
+:102E9000B40500500BE54A7F00FE7C1712324D222C
+:102EA0007C071225DF2212257D22E56D20E71DE536
+:102EB0004AB403004010B40500500BE54A7F00FE01
+:102EC0007C1812324D227C071225DF2212257D222A
+:102ED000E56D20E71DE54AB403004010B40500503D
+:102EE0000BE54A7F00FE7C1512324D227C0712252D
+:102EF000DF2212257D22E56D20E7067C071225DF03
+:102F00002212257D22E56D30E72090FF00E0541F5E
+:102F1000701090FF01E0B480051225748003122523
+:102F20007D227D007C051225462290FF00E0541F83
+:102F300060067C051225DF22D3E5729448E5719482
+:102F400000500BC3E5729407E571940050067C03B2
+:102F50001225DF22E54AB40504123123227C071230
+:102F600025DF22E56D30E7087D007C05122546222D
+:102F70007C051225DF22B420028003D340008000AC
+:102F80001230512275430090FF83E0540FD39543D4
+:102F90004024E54324F0F582E434FEF583E0AD6A95
+:102FA000AE69AF6812031805430DED70010E8D6A0E
+:102FB0008E698F6880D1E5437D00FCC3E5709CF588
+:102FC00070E56F9DF56FE570456F6006E490FF83D7
+:102FD000F02290FF82E04408F0E4F56F75704990AC
+:102FE000FC35E0B405028003D3404090FC36E0F5A8
+:102FF00043B405028003D3400AE4FF04FE7C0B12B5
+:10300000324D22B401028003D3400AE4FF04FE7C67
+:103010000912324D22B403004010B40500500BE5F4
+:10302000437F00FE7C1412324D2222B480004023E4
+:10303000B48200501E7C357DFC1217A57D008C6C7F
+:103040008D6B90FC37E0600512305180057C0012DA
+:103050003076222290FF83E0547FF090FF82E0449C
+:1030600008F090FF80E04408F02290FF82E04408DE
+:10307000F090FF80E04408F0228C237D008C708D5E
+:103080006F756A357569FC75680112308B2290FF87
+:1030900083E0547FF0E5706449456F700122C3E519
+:1030A000709408E56F94004015752108E5217D00B6
+:1030B000FCC3E5709CF570E56F9DF56F8009857028
+:1030C00021E4F56F757049752200E522C395215002
+:1030D00026AD6AAE69AF681201EFFCE52224F8F56F
+:1030E00082E434FEF583ECF005220DED70010E8DC7
+:1030F0006A8E698F6880D3E521547F90FF81F0222A
+:103100008C487F00EF24FD4019E4EF75F007A424FC
+:103110007FF582E434F8F583E065487002D3220F2E
+:1031200080E28F47C32285727085716F90FF82E0C5
+:1031300054F7F090FF83E0547FF022C000C001C03C
+:1031400002C006C007E5782408F8860653067F7C8F
+:10315000FF1231AD7C007D00E57B6046FF90FD9560
+:10316000E0547F6E700FC083C082A3E0FDA3E0FC3B
+:10317000A3157B8007A3A3A3DFE68026DF06D0820A
+:10318000D083801EE0F8A3E0F9A3E0FAD082D083D8
+:10319000E8F0A3E9F0A3EAF0A3C083C082A3A3A34D
+:1031A00080DA123246D007D006D002D001D00022F9
+:1031B00085A87A75A888EC70027C3F8C7922E57826
+:1031C0002408F8760012329A80FBC000C001C002C9
+:1031D000C006C007AE047CFF1231ADE57B6042FF44
+:1031E00090FD95E0547F6E700BC083C082A3A3A3B3
+:1031F000157B8007A3A3A3DFEA8026DF06D082D059
+:103200008380D8E0F8A3E0F9A3E0FAD082D083E885
+:10321000F0A3E9F0A3EAF0A3C083C082A3A3A38034
+:10322000DA7808087918097C01E6547F6E70067612
+:10323000007700800608090CBC08EE123246D00761
+:10324000D006D002D001D00022757900857AA8225C
+:10325000C0F0C082C083C3E57B24E8500512329AD7
+:1032600080F4EC6031903575E493C39C4028C00431
+:103270007CFF1231ADD004430480E57B75F003A4DC
+:103280002495F582E434FDF583ECF0EFA3F0EEA392
+:10329000F0057B123246D083D082D0F022C0047C6D
+:1032A00020D28CD28DD504FDD0042275A80075885B
+:1032B0000075B80075F00075D000E4F8900000F6D5
+:1032C00008B800FB020000C3ED940250047D037CAB
+:1032D000E8ECF4FCEDF4FD0CBC00010D8C7F8D7E60
+:1032E00022C3EC94BCED940250047D077CD0ECF436
+:1032F000FCEDF4FD0CBC00010D8C7D8D7C22EC708E
+:103300000122C000E5782418F8A604E5782408F81E
+:10331000C6547FF6E630E703D0002212329A80F4DA
+:10332000C28C857C8C857D8AD28CC0E0C0D0C0F0F8
+:10333000C082C083C000C001C002C003C004C00579
+:10334000C006C007121AF8E5782408F8E66024E5FC
+:10335000782410F8A681E57875F021A4248DF582F3
+:10336000E434FCF58378AEE58104C398F9E6F0080F
+:10337000A3D9FA74082578F8057808E65480700C0B
+:10338000E578B407F3780875780080EFE5782410C5
+:10339000F88681E57875F021A4248DF582E434FC6B
+:1033A000F58378AEE58104C398F9E0F608A3D9FA6D
+:1033B000D007D006D005D004D003D002D001D00071
+:1033C000D083D082D0F0D0D0D0E032C0E0C0D0C026
+:1033D00000C001C002C28E857E8D857F8BD28E7823
+:1033E0001979097A07E77004A600800BE6600816D1
+:1033F000E67004E74480F70809DAEAE57960131417
+:10340000F579700EE5782408F87600123246D28CF1
+:10341000D28DD002D001D000D0D0D0E0327581ADB5
+:10342000742A90FF93F0757F30757EF8757D607516
+:103430007CF012053F1234CE12175B90FF93E044EC
+:1034400001F0B2B31234F81232A880DA22C0007C44
+:1034500001EC2408F8E660090CBC08F512329A80E9
+:10346000EED00022C0F0C082C083C000C006C007FA
+:10347000ED2410F876BCED75F021A4248DF582E4DE
+:1034800034FCF583C082C083A3A3E4780DF0A3D8F5
+:10349000FCEC547F75F002A42441F582E5F034354C
+:1034A000F583E493FE740193F5828E83E493FE74B6
+:1034B0000193FFD083D082EFF0A3EEF0ED2408F863
+:1034C000EC4480F6D007D006D000D083D082D0F074
+:1034D00022757800757B007A08791878087600776D
+:1034E000000809DAF8E478087480447FF67401442F
+:1034F00010F58975B808D2ABD2A9227581ADD28EEC
+:10350000D28CD2AFE57B6032FF90FD95E0548060B5
+:103510002478087908E0547FFA7B00E6547FB502EE
+:10352000027BFF08D9F5EB700CEAF012344AAD04C7
+:10353000AC02123461A3A3A3DFD212329A80C57CFD
+:10354000017D002204FE04F204F604EA04E604E22B
+:1035500004EE04FA04A604AA04D604DA04A204A21F
+:1035600004A204DE04BE04B604BA04B204CA04C64B
+:1035700004C204CE04D204AE1901030022004802A2
+:1035800000480E301420C81AD0180A0C0506020391
+:1035900001020001CE0181010000C0008000600036
+:1035A0003000180010000800040002000100081894
+:1035B00028380C05100A0200000000000301100A60
+:1035C000020000000000FBE0FBF2090227000102FC
+:1035D00000A0FA0904000003FF00000007058102B3
+:1035E00040000007050102400000070583030200B8
+:1035F00001220354005500530042003300340031CF
+:1036000000300020002000200020002000200020AA
+:073610000020000000000093
+:00000001FF
-- 
GitLab


From d32ad102c6d748b510fd89f1af4232eac1be8732 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Sun, 11 Jan 2009 15:03:23 +0000
Subject: [PATCH 242/492] script: improve markup_oops.pl to also decode oopses
 in modules

There has been some light flamewar on lkml about decoding oopses
in modules (as part of the crashdump flamewar).

Now this isn't rocket science, just the markup_oops.pl script
cheaped out and didn't handle modules. But really; a flamewar
all about that?? What happened to C++ in the kernel or reading
files from inside the kernel?

This patch adds module support to markup_oops.pl; it's not the
most pretty perl but it works for my testcases...

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/markup_oops.pl | 59 +++++++++++++++++++++++++++++++++++-------
 1 file changed, 50 insertions(+), 9 deletions(-)

diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index 700a7a654a3..d40449cafa8 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -1,5 +1,7 @@
 #!/usr/bin/perl -w
 
+use File::Basename;
+
 # Copyright 2008, Intel Corporation
 #
 # This file is part of the Linux kernel
@@ -13,23 +15,41 @@
 
 
 my $vmlinux_name = $ARGV[0];
-
+if (!defined($vmlinux_name)) {
+	my $kerver = `uname -r`;
+	chomp($kerver);
+	$vmlinux_name = "/lib/modules/$kerver/build/vmlinux";
+	print "No vmlinux specified, assuming $vmlinux_name\n";
+}
+my $filename = $vmlinux_name;
 #
 # Step 1: Parse the oops to find the EIP value
 #
 
 my $target = "0";
+my $function;
+my $module = "";
+my $func_offset;
+my $vmaoffset = 0;
+
 while (<STDIN>) {
-	if ($_ =~ /EIP: 0060:\[\<([a-z0-9]+)\>\]/) {
+	my $line = $_;
+	if ($line =~ /EIP: 0060:\[\<([a-z0-9]+)\>\]/) {
 		$target = $1;
 	}
-}
+	if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]/) {
+		$function = $1;
+		$func_offset = $2;
+	}
 
-if ($target =~ /^f8/) {
-	print "This script does not work on modules ... \n";
-	exit;
+	# check if it's a module
+	if ($line =~ /EIP is at ([a-zA-Z0-9\_]+)\+(0x[0-9a-f]+)\/0x[a-f0-9]+\W\[([a-zA-Z0-9\_\-]+)\]/) {
+		$module = $3;
+	}
 }
 
+my $decodestart = hex($target) - hex($func_offset);
+my $decodestop = $decodestart + 8192;
 if ($target eq "0") {
 	print "No oops found!\n";
 	print "Usage: \n";
@@ -37,6 +57,29 @@ if ($target eq "0") {
 	exit;
 }
 
+# if it's a module, we need to find the .ko file and calculate a load offset
+if ($module ne "") {
+	my $dir = dirname($filename);
+	$dir = $dir . "/";
+	my $mod = $module . ".ko";
+	my $modulefile = `find $dir -name $mod | head -1`;
+	chomp($modulefile);
+	$filename = $modulefile;
+	if ($filename eq "") {
+		print "Module .ko file for $module not found. Aborting\n";
+		exit;
+	}
+	# ok so we found the module, now we need to calculate the vma offset
+	open(FILE, "objdump -dS $filename |") || die "Cannot start objdump";
+	while (<FILE>) {
+		if ($_ =~ /^([0-9a-f]+) \<$function\>\:/) {
+			my $fu = $1;
+			$vmaoffset = hex($target) - hex($fu) - hex($func_offset);
+		}
+	}
+	close(FILE);
+}
+
 my $counter = 0;
 my $state   = 0;
 my $center  = 0;
@@ -59,9 +102,7 @@ sub InRange {
 # first, parse the input into the lines array, but to keep size down,
 # we only do this for 4Kb around the sweet spot
 
-my $filename;
-
-open(FILE, "objdump -dS $vmlinux_name |") || die "Cannot start objdump";
+open(FILE, "objdump -dS --adjust-vma=$vmaoffset --start-address=$decodestart --stop-address=$decodestop $filename |") || die "Cannot start objdump";
 
 while (<FILE>) {
 	my $line = $_;
-- 
GitLab


From 37a76bd4f1b716949fc38a6842e89f0ccb8384d0 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Sun, 11 Jan 2009 15:35:01 +0000
Subject: [PATCH 243/492] async: fix __lowest_in_progress()

At 37000 feet somewhere near Greenland I woke up from a half-sleep with the
realisation that __lowest_in_progress() is buggy. After landing I checked
and there were indeed 2 problems with it; this patch fixes both:
* The order of the list checks was wrong
* The locking was not correct.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/async.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/kernel/async.c b/kernel/async.c
index f286e9f2b73..608b32b4281 100644
--- a/kernel/async.c
+++ b/kernel/async.c
@@ -90,12 +90,12 @@ extern int initcall_debug;
 static async_cookie_t  __lowest_in_progress(struct list_head *running)
 {
 	struct async_entry *entry;
-	if (!list_empty(&async_pending)) {
-		entry = list_first_entry(&async_pending,
+	if (!list_empty(running)) {
+		entry = list_first_entry(running,
 			struct async_entry, list);
 		return entry->cookie;
-	} else if (!list_empty(running)) {
-		entry = list_first_entry(running,
+	} else if (!list_empty(&async_pending)) {
+		entry = list_first_entry(&async_pending,
 			struct async_entry, list);
 		return entry->cookie;
 	} else {
@@ -104,6 +104,17 @@ static async_cookie_t  __lowest_in_progress(struct list_head *running)
 	}
 
 }
+
+static async_cookie_t  lowest_in_progress(struct list_head *running)
+{
+	unsigned long flags;
+	async_cookie_t ret;
+
+	spin_lock_irqsave(&async_lock, flags);
+	ret = __lowest_in_progress(running);
+	spin_unlock_irqrestore(&async_lock, flags);
+	return ret;
+}
 /*
  * pick the first pending entry and run it
  */
@@ -229,7 +240,7 @@ void async_synchronize_cookie_special(async_cookie_t cookie, struct list_head *r
 		starttime = ktime_get();
 	}
 
-	wait_event(async_done, __lowest_in_progress(running) >= cookie);
+	wait_event(async_done, lowest_in_progress(running) >= cookie);
 
 	if (initcall_debug && system_state == SYSTEM_BOOTING) {
 		endtime = ktime_get();
-- 
GitLab


From 50df48f59d656d58a1734df5cfe00cdc9a74e8b5 Mon Sep 17 00:00:00 2001
From: Yossi Etigin <yosefe@Voltaire.COM>
Date: Mon, 12 Jan 2009 19:28:42 -0800
Subject: [PATCH 244/492] IPoIB: Do not join broadcast group if interface is
 brought down

Because the ipoib_workqueue is not flushed when ipoib interface is
brought down, ipoib_mcast_join() may trigger a join to the broadcast
group after priv->broadcast was set to NULL (during cleanup).  This
will cause the system to be a member of the broadcast group when
interface is down.  As a side effect, this breaks the optimization of
setting the Q_key only when joining the broadcast group.

Signed-off-by: Yossi Etigin <yosefe@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index a2eb3b9789e..59d02e0b8df 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -529,6 +529,9 @@ void ipoib_mcast_join_task(struct work_struct *work)
 	if (!priv->broadcast) {
 		struct ipoib_mcast *broadcast;
 
+		if (!test_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
+			return;
+
 		broadcast = ipoib_mcast_alloc(dev, 1);
 		if (!broadcast) {
 			ipoib_warn(priv, "failed to allocate broadcast group\n");
-- 
GitLab


From f5eb3b76003cc36f3f66514eef05779e7559c6a3 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Mon, 12 Jan 2009 19:30:41 -0800
Subject: [PATCH 245/492] IB/iser: Add dependency on INFINIBAND_ADDR_TRANS

Fix ib_iser build to depend on INFINIBAND_ADDR_TRANS; if INET=y but
IPV6=n, then the RDMA CM is not built but INFINIBAND_ISER can be
enabled, leading to:

    ERROR: "rdma_destroy_id" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined!
    ERROR: "rdma_connect" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined!
    ERROR: "rdma_destroy_qp" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined!
    ERROR: "rdma_create_id" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined!
    ERROR: "rdma_create_qp" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined!
    ERROR: "rdma_resolve_route" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined!
    ERROR: "rdma_disconnect" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined!
    ERROR: "rdma_resolve_addr" [drivers/infiniband/ulp/iser/ib_iser.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
---
 drivers/infiniband/ulp/iser/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig
index 77dedba829e..b411c51842d 100644
--- a/drivers/infiniband/ulp/iser/Kconfig
+++ b/drivers/infiniband/ulp/iser/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_ISER
 	tristate "iSCSI Extensions for RDMA (iSER)"
-	depends on SCSI && INET
+	depends on SCSI && INET && INFINIBAND_ADDR_TRANS
 	select SCSI_ISCSI_ATTRS
 	---help---
 	  Support for the iSCSI Extensions for RDMA (iSER) Protocol
-- 
GitLab


From e16459c6b7e9c1390020a3e2a033b5383d1c4f3b Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Fri, 2 Jan 2009 10:46:04 +0000
Subject: [PATCH 246/492] powerpc: Make dummy section a valid note header

We are declaring the dummy section (used to work around a binutils
bug) as PT_NOTE, but we don't have enough bytes for it to be a valid
note header, and kexec userspace complains:

Warning: Elf Note name is not null terminated
Warning: append= option is not passed. Using the first kernel root partition
Warning: Elf Note name is not null terminated

Instead of using the arbitray value 0xf177 (aka "fill"), declare a
no-name no-description note of type 0.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 47bf15cd2c9..161b9b9691f 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -87,7 +87,9 @@ SECTIONS
 	/* The dummy segment contents for the bug workaround mentioned above
 	   near PHDRS.  */
 	.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
-		LONG(0xf177)
+		LONG(0)
+		LONG(0)
+		LONG(0)
 	} :kernel :dummy
 
 /*
-- 
GitLab


From 66c721e184e594d5761c5db804ade08fab81930d Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Fri, 2 Jan 2009 10:46:15 +0000
Subject: [PATCH 247/492] powerpc/kexec: Check crash_base for relocatable
 kernel

Enforce that the crash kernel region never overlaps the current kernel,
as it will be written directly on kexec load.

Also, default to the previous KDUMP_KERNELBASE if the start is 0.

Other architectures (x86, ia64) state that specifying the start address
0 (or omitting it) will result in the kernel allocating it.  Before the
relocatable patch in 2.6.28, powerpc would adjust any other start value
to the hardcoded KDUMP_KERNELBASE of 32M.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/machine_kexec.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index b3abebb7ee6..d59e2b1bdcb 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -93,10 +93,35 @@ void __init reserve_crashkernel(void)
 				KDUMP_KERNELBASE);
 
 	crashk_res.start = KDUMP_KERNELBASE;
+#else
+	if (!crashk_res.start) {
+		/*
+		 * unspecified address, choose a region of specified size
+		 * can overlap with initrd (ignoring corruption when retained)
+		 * ppc64 requires kernel and some stacks to be in first segemnt
+		 */
+		crashk_res.start = KDUMP_KERNELBASE;
+	}
+
+	crash_base = PAGE_ALIGN(crashk_res.start);
+	if (crash_base != crashk_res.start) {
+		printk("Crash kernel base must be aligned to 0x%lx\n",
+				PAGE_SIZE);
+		crashk_res.start = crash_base;
+	}
+
 #endif
 	crash_size = PAGE_ALIGN(crash_size);
 	crashk_res.end = crashk_res.start + crash_size - 1;
 
+	/* The crash region must not overlap the current kernel */
+	if (overlaps_crashkernel(__pa(_stext), _end - _stext)) {
+		printk(KERN_WARNING
+			"Crash kernel can not overlap current kernel\n");
+		crashk_res.start = crashk_res.end = 0;
+		return;
+	}
+
 	/* Crash kernel trumps memory limit */
 	if (memory_limit && memory_limit <= crashk_res.end) {
 		memory_limit = crashk_res.end + 1;
-- 
GitLab


From fe333321e2a71f706b794d55b6a3dcb5ab240f65 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Tue, 6 Jan 2009 14:26:03 +0000
Subject: [PATCH 248/492] powerpc: Change u64/s64 to a long long integer type

Convert arch/powerpc/ over to long long based u64:

 -#ifdef __powerpc64__
 -# include <asm-generic/int-l64.h>
 -#else
 -# include <asm-generic/int-ll64.h>
 -#endif
 +#include <asm-generic/int-ll64.h>

This will avoid reoccuring spurious warnings in core kernel code that
comes when people test on their own hardware. (i.e. x86 in ~98% of the
cases) This is what x86 uses and it generally helps keep 64-bit code
32-bit clean too.

[Adjusted to not impact user mode (from paulus) - sfr]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/include/asm/rtas.h               |  2 +-
 arch/powerpc/include/asm/types.h              |  7 +++-
 arch/powerpc/kernel/dma-iommu.c               |  4 +--
 arch/powerpc/kernel/iommu.c                   | 12 +++----
 arch/powerpc/kernel/lparcfg.c                 | 10 +++---
 arch/powerpc/kernel/setup_64.c                |  6 ++--
 arch/powerpc/mm/stab.c                        |  4 +--
 arch/powerpc/oprofile/op_model_pa6t.c         |  6 ++--
 arch/powerpc/platforms/cell/beat_interrupt.c  |  2 +-
 arch/powerpc/platforms/cell/celleb_scc_epci.c |  4 +--
 arch/powerpc/platforms/cell/iommu.c           |  4 +--
 arch/powerpc/platforms/cell/ras.c             |  8 ++---
 arch/powerpc/platforms/cell/spu_base.c        |  4 +--
 arch/powerpc/platforms/cell/spu_callbacks.c   |  2 +-
 arch/powerpc/platforms/iseries/iommu.c        |  4 +--
 arch/powerpc/platforms/pseries/iommu.c        | 35 +++++++++----------
 arch/powerpc/sysdev/mpic.c                    |  2 +-
 drivers/net/pasemi_mac.c                      |  6 ++--
 drivers/pcmcia/electra_cf.c                   |  2 +-
 drivers/scsi/ibmvscsi/ibmvscsi.c              | 12 +++----
 20 files changed, 70 insertions(+), 66 deletions(-)

diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index e0175beb446..0aa0315fb7e 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -18,7 +18,7 @@
  */
 
 #define RTAS_UNKNOWN_SERVICE (-1)
-#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
+#define RTAS_INSTANTIATE_MAX (1ULL<<30) /* Don't instantiate rtas at/above this value */
 
 /* Buffer size for ppc_rtas system call. */
 #define RTAS_RMOBUF_MAX (64 * 1024)
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index c004c13f291..7ce27a52bb3 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -1,7 +1,12 @@
 #ifndef _ASM_POWERPC_TYPES_H
 #define _ASM_POWERPC_TYPES_H
 
-#ifdef __powerpc64__
+/*
+ * This is here because we used to use l64 for 64bit powerpc
+ * and we don't want to impact user mode with our change to ll64
+ * in the kernel.
+ */
+#if defined(__powerpc64__) && !defined(__KERNEL__)
 # include <asm-generic/int-l64.h>
 #else
 # include <asm-generic/int-ll64.h>
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 14183af1b3f..2983adac8cc 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -79,10 +79,10 @@ static int dma_iommu_dma_supported(struct device *dev, u64 mask)
 		       "Warning: IOMMU offset too big for device mask\n");
 		if (tbl)
 			printk(KERN_INFO
-			       "mask: 0x%08lx, table offset: 0x%08lx\n",
+			       "mask: 0x%08llx, table offset: 0x%08lx\n",
 				mask, tbl->it_offset);
 		else
-			printk(KERN_INFO "mask: 0x%08lx, table unavailable\n",
+			printk(KERN_INFO "mask: 0x%08llx, table unavailable\n",
 				mask);
 		return 0;
 	} else
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 1bfa706b96e..fd51578e29d 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -239,12 +239,12 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 		if (printk_ratelimit()) {
 			printk(KERN_INFO "iommu_free: invalid entry\n");
 			printk(KERN_INFO "\tentry     = 0x%lx\n", entry); 
-			printk(KERN_INFO "\tdma_addr  = 0x%lx\n", (u64)dma_addr);
-			printk(KERN_INFO "\tTable     = 0x%lx\n", (u64)tbl);
-			printk(KERN_INFO "\tbus#      = 0x%lx\n", (u64)tbl->it_busno);
-			printk(KERN_INFO "\tsize      = 0x%lx\n", (u64)tbl->it_size);
-			printk(KERN_INFO "\tstartOff  = 0x%lx\n", (u64)tbl->it_offset);
-			printk(KERN_INFO "\tindex     = 0x%lx\n", (u64)tbl->it_index);
+			printk(KERN_INFO "\tdma_addr  = 0x%llx\n", (u64)dma_addr);
+			printk(KERN_INFO "\tTable     = 0x%llx\n", (u64)tbl);
+			printk(KERN_INFO "\tbus#      = 0x%llx\n", (u64)tbl->it_busno);
+			printk(KERN_INFO "\tsize      = 0x%llx\n", (u64)tbl->it_size);
+			printk(KERN_INFO "\tstartOff  = 0x%llx\n", (u64)tbl->it_offset);
+			printk(KERN_INFO "\tindex     = 0x%llx\n", (u64)tbl->it_index);
 			WARN_ON(1);
 		}
 		return;
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index d051e8cbcd0..182e0f642f3 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -240,7 +240,7 @@ static void parse_ppp_data(struct seq_file *m)
 	if (rc)
 		return;
 
-	seq_printf(m, "partition_entitled_capacity=%ld\n",
+	seq_printf(m, "partition_entitled_capacity=%lld\n",
 	           ppp_data.entitlement);
 	seq_printf(m, "group=%d\n", ppp_data.group_num);
 	seq_printf(m, "system_active_processors=%d\n",
@@ -265,7 +265,7 @@ static void parse_ppp_data(struct seq_file *m)
 		   ppp_data.unallocated_weight);
 	seq_printf(m, "capacity_weight=%d\n", ppp_data.weight);
 	seq_printf(m, "capped=%d\n", ppp_data.capped);
-	seq_printf(m, "unallocated_capacity=%ld\n",
+	seq_printf(m, "unallocated_capacity=%lld\n",
 		   ppp_data.unallocated_entitlement);
 }
 
@@ -509,10 +509,10 @@ static ssize_t update_ppp(u64 *entitlement, u8 *weight)
 	} else
 		return -EINVAL;
 
-	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	pr_debug("%s: current_entitled = %llu, current_weight = %u\n",
 		 __func__, ppp_data.entitlement, ppp_data.weight);
 
-	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+	pr_debug("%s: new_entitled = %llu, new_weight = %u\n",
 		 __func__, new_entitled, new_weight);
 
 	retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
@@ -558,7 +558,7 @@ static ssize_t update_mpp(u64 *entitlement, u8 *weight)
 	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
 	         __func__, mpp_data.entitled_mem, mpp_data.mem_weight);
 
-	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+	pr_debug("%s: new_entitled = %llu, new_weight = %u\n",
 		 __func__, new_entitled, new_weight);
 
 	rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index d8bd2161e73..2d34196bba8 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -434,8 +434,8 @@ void __init setup_system(void)
 	printk("Starting Linux PPC64 %s\n", init_utsname()->version);
 
 	printk("-----------------------------------------------------\n");
-	printk("ppc64_pft_size                = 0x%lx\n", ppc64_pft_size);
-	printk("physicalMemorySize            = 0x%lx\n", lmb_phys_mem_size());
+	printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size);
+	printk("physicalMemorySize            = 0x%llx\n", lmb_phys_mem_size());
 	if (ppc64_caches.dline_size != 0x80)
 		printk("ppc64_caches.dcache_line_size = 0x%x\n",
 		       ppc64_caches.dline_size);
@@ -493,7 +493,7 @@ static void __init emergency_stack_init(void)
 	 * bringup, we need to get at them in real mode. This means they
 	 * must also be within the RMO region.
 	 */
-	limit = min(0x10000000UL, lmb.rmo_size);
+	limit = min(0x10000000ULL, lmb.rmo_size);
 
 	for_each_possible_cpu(i) {
 		unsigned long sp;
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index 60e6032a808..98cd1dc2ae7 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -251,8 +251,8 @@ void __init stabs_alloc(void)
 
 		paca[cpu].stab_addr = newstab;
 		paca[cpu].stab_real = virt_to_abs(newstab);
-		printk(KERN_INFO "Segment table for CPU %d at 0x%lx "
-		       "virtual, 0x%lx absolute\n",
+		printk(KERN_INFO "Segment table for CPU %d at 0x%llx "
+		       "virtual, 0x%llx absolute\n",
 		       cpu, paca[cpu].stab_addr, paca[cpu].stab_real);
 	}
 }
diff --git a/arch/powerpc/oprofile/op_model_pa6t.c b/arch/powerpc/oprofile/op_model_pa6t.c
index c40de461fd4..42f778dff91 100644
--- a/arch/powerpc/oprofile/op_model_pa6t.c
+++ b/arch/powerpc/oprofile/op_model_pa6t.c
@@ -132,7 +132,7 @@ static int pa6t_reg_setup(struct op_counter_config *ctr,
 	for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) {
 		/* counters are 40 bit. Move to cputable at some point? */
 		reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count;
-		pr_debug("reset_value for pmc%u inited to 0x%lx\n",
+		pr_debug("reset_value for pmc%u inited to 0x%llx\n",
 				 pmc, reset_value[pmc]);
 	}
 
@@ -177,7 +177,7 @@ static int pa6t_start(struct op_counter_config *ctr)
 
 	oprofile_running = 1;
 
-	pr_debug("start on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+	pr_debug("start on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
 
 	return 0;
 }
@@ -193,7 +193,7 @@ static void pa6t_stop(void)
 
 	oprofile_running = 0;
 
-	pr_debug("stop on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0);
+	pr_debug("stop on cpu %d, mmcr0 %llx\n", smp_processor_id(), mmcr0);
 }
 
 /* handle the perfmon overflow vector */
diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c
index 192a9350937..72254848a22 100644
--- a/arch/powerpc/platforms/cell/beat_interrupt.c
+++ b/arch/powerpc/platforms/cell/beat_interrupt.c
@@ -99,7 +99,7 @@ static void beatic_end_irq(unsigned int irq_plug)
 	err = beat_downcount_of_interrupt(irq_plug);
 	if (err != 0) {
 		if ((err & 0xFFFFFFFF) != 0xFFFFFFF5) /* -11: wrong state */
-			panic("Failed to downcount IRQ! Error = %16lx", err);
+			panic("Failed to downcount IRQ! Error = %16llx", err);
 
 		printk(KERN_ERR "IRQ over-downcounted, plug %d\n", irq_plug);
 	}
diff --git a/arch/powerpc/platforms/cell/celleb_scc_epci.c b/arch/powerpc/platforms/cell/celleb_scc_epci.c
index 08c285b10e3..48ec88a38a1 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_epci.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_epci.c
@@ -405,7 +405,7 @@ static int __init celleb_setup_epci(struct device_node *node,
 	hose->cfg_addr = ioremap(r.start, (r.end - r.start + 1));
 	if (!hose->cfg_addr)
 		goto error;
-	pr_debug("EPCI: cfg_addr map 0x%016lx->0x%016lx + 0x%016lx\n",
+	pr_debug("EPCI: cfg_addr map 0x%016llx->0x%016lx + 0x%016llx\n",
 		 r.start, (unsigned long)hose->cfg_addr, (r.end - r.start + 1));
 
 	if (of_address_to_resource(node, 2, &r))
@@ -413,7 +413,7 @@ static int __init celleb_setup_epci(struct device_node *node,
 	hose->cfg_data = ioremap(r.start, (r.end - r.start + 1));
 	if (!hose->cfg_data)
 		goto error;
-	pr_debug("EPCI: cfg_data map 0x%016lx->0x%016lx + 0x%016lx\n",
+	pr_debug("EPCI: cfg_data map 0x%016llx->0x%016lx + 0x%016llx\n",
 		 r.start, (unsigned long)hose->cfg_data, (r.end - r.start + 1));
 
 	hose->ops = &celleb_epci_ops;
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 88d94b59a7c..ee5033eddf0 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -855,7 +855,7 @@ static int __init cell_iommu_init_disabled(void)
 	 */
 	if (np && size < lmb_end_of_DRAM()) {
 		printk(KERN_WARNING "iommu: force-enabled, dma window"
-		       " (%ldMB) smaller than total memory (%ldMB)\n",
+		       " (%ldMB) smaller than total memory (%lldMB)\n",
 		       size >> 20, lmb_end_of_DRAM() >> 20);
 		return -ENODEV;
 	}
@@ -985,7 +985,7 @@ static void cell_dma_dev_setup_fixed(struct device *dev)
 	addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
 	archdata->dma_data = (void *)addr;
 
-	dev_dbg(dev, "iommu: fixed addr = %lx\n", addr);
+	dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
 }
 
 static void insert_16M_pte(unsigned long addr, unsigned long *ptab,
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 7b4cefa2199..5f961c464cc 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -38,16 +38,16 @@ static void dump_fir(int cpu)
 	/* Todo: do some nicer parsing of bits and based on them go down
 	 * to other sub-units FIRs and not only IIC
 	 */
-	printk(KERN_ERR "Global Checkstop FIR    : 0x%016lx\n",
+	printk(KERN_ERR "Global Checkstop FIR    : 0x%016llx\n",
 	       in_be64(&pregs->checkstop_fir));
-	printk(KERN_ERR "Global Recoverable FIR  : 0x%016lx\n",
+	printk(KERN_ERR "Global Recoverable FIR  : 0x%016llx\n",
 	       in_be64(&pregs->checkstop_fir));
-	printk(KERN_ERR "Global MachineCheck FIR : 0x%016lx\n",
+	printk(KERN_ERR "Global MachineCheck FIR : 0x%016llx\n",
 	       in_be64(&pregs->spec_att_mchk_fir));
 
 	if (iregs == NULL)
 		return;
-	printk(KERN_ERR "IOC FIR                 : 0x%016lx\n",
+	printk(KERN_ERR "IOC FIR                 : 0x%016llx\n",
 	       in_be64(&iregs->ioc_fir));
 
 }
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index a5bdb89a17c..e487ad68ac1 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -151,7 +151,7 @@ static inline void spu_load_slb(struct spu *spu, int slbe, struct spu_slb *slb)
 {
 	struct spu_priv2 __iomem *priv2 = spu->priv2;
 
-	pr_debug("%s: adding SLB[%d] 0x%016lx 0x%016lx\n",
+	pr_debug("%s: adding SLB[%d] 0x%016llx 0x%016llx\n",
 			__func__, slbe, slb->vsid, slb->esid);
 
 	out_be64(&priv2->slb_index_W, slbe);
@@ -221,7 +221,7 @@ static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
 {
 	int ret;
 
-	pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea);
+	pr_debug("%s, %llx, %lx\n", __func__, dsisr, ea);
 
 	/*
 	 * Handle kernel space hash faults immediately. User hash
diff --git a/arch/powerpc/platforms/cell/spu_callbacks.c b/arch/powerpc/platforms/cell/spu_callbacks.c
index 19f6bfdbb93..fec1495e6b1 100644
--- a/arch/powerpc/platforms/cell/spu_callbacks.c
+++ b/arch/powerpc/platforms/cell/spu_callbacks.c
@@ -54,7 +54,7 @@ long spu_sys_callback(struct spu_syscall_block *s)
 	long (*syscall)(u64 a1, u64 a2, u64 a3, u64 a4, u64 a5, u64 a6);
 
 	if (s->nr_ret >= ARRAY_SIZE(spu_syscall_table)) {
-		pr_debug("%s: invalid syscall #%ld", __func__, s->nr_ret);
+		pr_debug("%s: invalid syscall #%lld", __func__, s->nr_ret);
 		return -ENOSYS;
 	}
 
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index bbe828f1b88..6ed75bffc8a 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -66,7 +66,7 @@ static int tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
 
 		rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, tce);
 		if (rc)
-			panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n",
+			panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%llx\n",
 					rc);
 		index++;
 		uaddr += TCE_PAGE_SIZE;
@@ -81,7 +81,7 @@ static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages)
 	while (npages--) {
 		rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, 0);
 		if (rc)
-			panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%lx\n",
+			panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%llx\n",
 					rc);
 		index++;
 	}
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index c90817acb47..3ee01b4f425 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -127,10 +127,10 @@ static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		}
 
 		if (rc && printk_ratelimit()) {
-			printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
-			printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
-			printk("\ttcenum  = 0x%lx\n", (u64)tcenum);
-			printk("\ttce val = 0x%lx\n", tce );
+			printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
+			printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+			printk("\ttcenum  = 0x%llx\n", (u64)tcenum);
+			printk("\ttce val = 0x%llx\n", tce );
 			show_stack(current, (unsigned long *)__get_SP());
 		}
 
@@ -210,10 +210,10 @@ static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	}
 
 	if (rc && printk_ratelimit()) {
-		printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
-		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
-		printk("\tnpages  = 0x%lx\n", (u64)npages);
-		printk("\ttce[0] val = 0x%lx\n", tcep[0]);
+		printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
+		printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+		printk("\tnpages  = 0x%llx\n", (u64)npages);
+		printk("\ttce[0] val = 0x%llx\n", tcep[0]);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
 	return ret;
@@ -227,9 +227,9 @@ static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages
 		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0);
 
 		if (rc && printk_ratelimit()) {
-			printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
-			printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
-			printk("\ttcenum  = 0x%lx\n", (u64)tcenum);
+			printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
+			printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+			printk("\ttcenum  = 0x%llx\n", (u64)tcenum);
 			show_stack(current, (unsigned long *)__get_SP());
 		}
 
@@ -246,9 +246,9 @@ static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long n
 
 	if (rc && printk_ratelimit()) {
 		printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n");
-		printk("\trc      = %ld\n", rc);
-		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
-		printk("\tnpages  = 0x%lx\n", (u64)npages);
+		printk("\trc      = %lld\n", rc);
+		printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+		printk("\tnpages  = 0x%llx\n", (u64)npages);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
 }
@@ -261,10 +261,9 @@ static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum)
 	rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret);
 
 	if (rc && printk_ratelimit()) {
-		printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%ld\n",
-			rc);
-		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
-		printk("\ttcenum  = 0x%lx\n", (u64)tcenum);
+		printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc);
+		printk("\tindex   = 0x%llx\n", (u64)tbl->it_index);
+		printk("\ttcenum  = 0x%llx\n", (u64)tcenum);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
 
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 3e0d89dcdba..a35297dbac2 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -435,7 +435,7 @@ static void __init mpic_scan_ht_msi(struct mpic *mpic, u8 __iomem *devbase,
 		addr = addr | ((u64)readl(base + HT_MSI_ADDR_HI) << 32);
 	}
 
-	printk(KERN_DEBUG "mpic:   - HT:%02x.%x %s MSI mapping found @ 0x%lx\n",
+	printk(KERN_DEBUG "mpic:   - HT:%02x.%x %s MSI mapping found @ 0x%llx\n",
 		PCI_SLOT(devfn), PCI_FUNC(devfn),
 		flags & HT_MSI_FLAGS_ENABLE ? "enabled" : "disabled", addr);
 
diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c
index 5b7a574ce57..d0349e7d73e 100644
--- a/drivers/net/pasemi_mac.c
+++ b/drivers/net/pasemi_mac.c
@@ -712,7 +712,7 @@ static inline void pasemi_mac_rx_error(const struct pasemi_mac *mac,
 	rcmdsta = read_dma_reg(PAS_DMA_RXINT_RCMDSTA(mac->dma_if));
 	ccmdsta = read_dma_reg(PAS_DMA_RXCHAN_CCMDSTA(chan->chno));
 
-	printk(KERN_ERR "pasemi_mac: rx error. macrx %016lx, rx status %lx\n",
+	printk(KERN_ERR "pasemi_mac: rx error. macrx %016llx, rx status %llx\n",
 		macrx, *chan->status);
 
 	printk(KERN_ERR "pasemi_mac: rcmdsta %08x ccmdsta %08x\n",
@@ -730,8 +730,8 @@ static inline void pasemi_mac_tx_error(const struct pasemi_mac *mac,
 
 	cmdsta = read_dma_reg(PAS_DMA_TXCHAN_TCMDSTA(chan->chno));
 
-	printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016lx, "\
-		"tx status 0x%016lx\n", mactx, *chan->status);
+	printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016llx, "\
+		"tx status 0x%016llx\n", mactx, *chan->status);
 
 	printk(KERN_ERR "pasemi_mac: tcmdsta 0x%08x\n", cmdsta);
 }
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index a34284b1482..d187ba4c5e0 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -297,7 +297,7 @@ static int __devinit electra_cf_probe(struct of_device *ofdev,
 		goto fail3;
 	}
 
-	dev_info(device, "at mem 0x%lx io 0x%lx irq %d\n",
+	dev_info(device, "at mem 0x%lx io 0x%llx irq %d\n",
 		 cf->mem_phys, io.start, cf->irq);
 
 	cf->active = 1;
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 5c541f7850f..74d07d137da 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1061,7 +1061,7 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd)
 	}
 
 	sdev_printk(KERN_INFO, cmd->device,
-                    "aborting command. lun 0x%lx, tag 0x%lx\n",
+                    "aborting command. lun 0x%llx, tag 0x%llx\n",
 		    (((u64) lun) << 48), (u64) found_evt);
 
 	wait_for_completion(&evt->comp);
@@ -1082,7 +1082,7 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd)
 	if (rsp_rc) {
 		if (printk_ratelimit())
 			sdev_printk(KERN_WARNING, cmd->device,
-				    "abort code %d for task tag 0x%lx\n",
+				    "abort code %d for task tag 0x%llx\n",
 				    rsp_rc, tsk_mgmt->task_tag);
 		return FAILED;
 	}
@@ -1102,12 +1102,12 @@ static int ibmvscsi_eh_abort_handler(struct scsi_cmnd *cmd)
 
 	if (found_evt == NULL) {
 		spin_unlock_irqrestore(hostdata->host->host_lock, flags);
-		sdev_printk(KERN_INFO, cmd->device, "aborted task tag 0x%lx completed\n",
+		sdev_printk(KERN_INFO, cmd->device, "aborted task tag 0x%llx completed\n",
 			    tsk_mgmt->task_tag);
 		return SUCCESS;
 	}
 
-	sdev_printk(KERN_INFO, cmd->device, "successfully aborted task tag 0x%lx\n",
+	sdev_printk(KERN_INFO, cmd->device, "successfully aborted task tag 0x%llx\n",
 		    tsk_mgmt->task_tag);
 
 	cmd->result = (DID_ABORT << 16);
@@ -1182,7 +1182,7 @@ static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd *cmd)
 		return FAILED;
 	}
 
-	sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%lx\n",
+	sdev_printk(KERN_INFO, cmd->device, "resetting device. lun 0x%llx\n",
 		    (((u64) lun) << 48));
 
 	wait_for_completion(&evt->comp);
@@ -1203,7 +1203,7 @@ static int ibmvscsi_eh_device_reset_handler(struct scsi_cmnd *cmd)
 	if (rsp_rc) {
 		if (printk_ratelimit())
 			sdev_printk(KERN_WARNING, cmd->device,
-				    "reset code %d for task tag 0x%lx\n",
+				    "reset code %d for task tag 0x%llx\n",
 				    rsp_rc, tsk_mgmt->task_tag);
 		return FAILED;
 	}
-- 
GitLab


From 9477e455b4b3ded3e7add8c96d8293105947eaac Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 6 Jan 2009 14:27:38 +0000
Subject: [PATCH 249/492] powerpc: Cleanup from l64 to ll64 change: arch code

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/pci_64.c                 | 6 +++---
 arch/powerpc/platforms/cell/spufs/coredump.c | 2 +-
 arch/powerpc/platforms/cell/spufs/fault.c    | 2 +-
 arch/powerpc/platforms/cell/spufs/file.c     | 6 +++---
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 586962f65c2..ea8eda8c87c 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -470,7 +470,7 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
 	if (bus->self) {
 		pr_debug("IO mapping for PCI-PCI bridge %s\n",
 			 pci_name(bus->self));
-		pr_debug("  virt=0x%016lx...0x%016lx\n",
+		pr_debug("  virt=0x%016llx...0x%016llx\n",
 			 bus->resource[0]->start + _IO_BASE,
 			 bus->resource[0]->end + _IO_BASE);
 		return 0;
@@ -502,7 +502,7 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
 					      hose->io_base_phys - phys_page);
 
 	pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
-	pr_debug("  phys=0x%016lx, virt=0x%p (alloc=0x%p)\n",
+	pr_debug("  phys=0x%016llx, virt=0x%p (alloc=0x%p)\n",
 		 hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
 	pr_debug("  size=0x%016lx (alloc=0x%016lx)\n",
 		 hose->pci_io_size, size_page);
@@ -517,7 +517,7 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
 	hose->io_resource.start += io_virt_offset;
 	hose->io_resource.end += io_virt_offset;
 
-	pr_debug("  hose->io_resource=0x%016lx...0x%016lx\n",
+	pr_debug("  hose->io_resource=0x%016llx...0x%016llx\n",
 		 hose->io_resource.start, hose->io_resource.end);
 
 	return 0;
diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c
index af116aadba1..c4d4a19235e 100644
--- a/arch/powerpc/platforms/cell/spufs/coredump.c
+++ b/arch/powerpc/platforms/cell/spufs/coredump.c
@@ -42,7 +42,7 @@ static ssize_t do_coredump_read(int num, struct spu_context *ctx, void *buffer,
 		return spufs_coredump_read[num].read(ctx, buffer, size, off);
 
 	data = spufs_coredump_read[num].get(ctx);
-	ret = snprintf(buffer, size, "0x%.16lx", data);
+	ret = snprintf(buffer, size, "0x%.16llx", data);
 	if (ret >= size)
 		return size;
 	return ++ret; /* count trailing NULL */
diff --git a/arch/powerpc/platforms/cell/spufs/fault.c b/arch/powerpc/platforms/cell/spufs/fault.c
index f093a581ac7..a4dd3ae7223 100644
--- a/arch/powerpc/platforms/cell/spufs/fault.c
+++ b/arch/powerpc/platforms/cell/spufs/fault.c
@@ -132,7 +132,7 @@ int spufs_handle_class1(struct spu_context *ctx)
 
 	spuctx_switch_state(ctx, SPU_UTIL_IOWAIT);
 
-	pr_debug("ctx %p: ea %016lx, dsisr %016lx state %d\n", ctx, ea,
+	pr_debug("ctx %p: ea %016llx, dsisr %016llx state %d\n", ctx, ea,
 		dsisr, ctx->state);
 
 	ctx->stats.hash_flt++;
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 7106b63d401..0da7f2bf5ee 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1654,7 +1654,7 @@ out:
 
 static int spufs_check_valid_dma(struct mfc_dma_command *cmd)
 {
-	pr_debug("queueing DMA %x %lx %x %x %x\n", cmd->lsa,
+	pr_debug("queueing DMA %x %llx %x %x %x\n", cmd->lsa,
 		 cmd->ea, cmd->size, cmd->tag, cmd->cmd);
 
 	switch (cmd->cmd) {
@@ -1671,7 +1671,7 @@ static int spufs_check_valid_dma(struct mfc_dma_command *cmd)
 	}
 
 	if ((cmd->lsa & 0xf) != (cmd->ea &0xf)) {
-		pr_debug("invalid DMA alignment, ea %lx lsa %x\n",
+		pr_debug("invalid DMA alignment, ea %llx lsa %x\n",
 				cmd->ea, cmd->lsa);
 		return -EIO;
 	}
@@ -2633,7 +2633,7 @@ static int spufs_show_ctx(struct seq_file *s, void *private)
 	}
 
 	seq_printf(s, "%c flgs(%lx) sflgs(%lx) pri(%d) ts(%d) spu(%02d)"
-		" %c %lx %lx %lx %lx %x %x\n",
+		" %c %llx %llx %llx %llx %x %x\n",
 		ctx->state == SPU_STATE_SAVED ? 'S' : 'R',
 		ctx->flags,
 		ctx->sched_flags,
-- 
GitLab


From 1901515c79f13d9a1913d246b6c0711318dadb4c Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 6 Jan 2009 14:28:48 +0000
Subject: [PATCH 250/492] powerpc: Cleanup from l64 to ll64 change:
 drivers/char

This is a powerpc specific driver.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/char/bsr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/bsr.c b/drivers/char/bsr.c
index 977dfb1096a..f6094ae0ef3 100644
--- a/drivers/char/bsr.c
+++ b/drivers/char/bsr.c
@@ -103,7 +103,7 @@ static ssize_t
 bsr_len_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct bsr_dev *bsr_dev = dev_get_drvdata(dev);
-	return sprintf(buf, "%lu\n", bsr_dev->bsr_len);
+	return sprintf(buf, "%llu\n", bsr_dev->bsr_len);
 }
 
 static struct device_attribute bsr_dev_attrs[] = {
-- 
GitLab


From a1c5a8932bbb75b550deb156d890027827fc9d6e Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 6 Jan 2009 14:40:06 +0000
Subject: [PATCH 251/492] powerpc: Cleanup from l64 to ll64 change: drivers/net

These are powerpc specific drivers.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/net/ehea/ehea_main.c |  8 ++++----
 drivers/net/ehea/ehea_qmr.c  | 18 +++++++++---------
 drivers/net/ibmveth.c        | 16 ++++++++--------
 drivers/net/iseries_veth.c   |  2 +-
 4 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index e3131ea629c..dfe92264e82 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -132,7 +132,7 @@ void ehea_dump(void *adr, int len, char *msg)
 	int x;
 	unsigned char *deb = adr;
 	for (x = 0; x < len; x += 16) {
-		printk(DRV_NAME " %s adr=%p ofs=%04x %016lx %016lx\n", msg,
+		printk(DRV_NAME " %s adr=%p ofs=%04x %016llx %016llx\n", msg,
 			  deb, x, *((u64 *)&deb[0]), *((u64 *)&deb[8]));
 		deb += 16;
 	}
@@ -883,7 +883,7 @@ static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param)
 
 	while (eqe) {
 		qp_token = EHEA_BMASK_GET(EHEA_EQE_QP_TOKEN, eqe->entry);
-		ehea_error("QP aff_err: entry=0x%lx, token=0x%x",
+		ehea_error("QP aff_err: entry=0x%llx, token=0x%x",
 			   eqe->entry, qp_token);
 
 		qp = port->port_res[qp_token].qp;
@@ -1159,7 +1159,7 @@ static void ehea_parse_eqe(struct ehea_adapter *adapter, u64 eqe)
 		netif_stop_queue(port->netdev);
 		break;
 	default:
-		ehea_error("unknown event code %x, eqe=0x%lX", ec, eqe);
+		ehea_error("unknown event code %x, eqe=0x%llX", ec, eqe);
 		break;
 	}
 }
@@ -1971,7 +1971,7 @@ static void ehea_set_multicast_list(struct net_device *dev)
 		}
 
 		if (dev->mc_count > port->adapter->max_mc_mac) {
-			ehea_info("Mcast registration limit reached (0x%lx). "
+			ehea_info("Mcast registration limit reached (0x%llx). "
 				  "Use ALLMULTI!",
 				  port->adapter->max_mc_mac);
 			goto out;
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index 225c692b5d9..49d766ebbcf 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -168,7 +168,7 @@ struct ehea_cq *ehea_create_cq(struct ehea_adapter *adapter,
 					     cq->fw_handle, rpage, 1);
 		if (hret < H_SUCCESS) {
 			ehea_error("register_rpage_cq failed ehea_cq=%p "
-				   "hret=%lx counter=%i act_pages=%i",
+				   "hret=%llx counter=%i act_pages=%i",
 				   cq, hret, counter, cq->attr.nr_pages);
 			goto out_kill_hwq;
 		}
@@ -178,13 +178,13 @@ struct ehea_cq *ehea_create_cq(struct ehea_adapter *adapter,
 
 			if ((hret != H_SUCCESS) || (vpage)) {
 				ehea_error("registration of pages not "
-					   "complete hret=%lx\n", hret);
+					   "complete hret=%llx\n", hret);
 				goto out_kill_hwq;
 			}
 		} else {
 			if (hret != H_PAGE_REGISTERED) {
 				ehea_error("CQ: registration of page failed "
-					   "hret=%lx\n", hret);
+					   "hret=%llx\n", hret);
 				goto out_kill_hwq;
 			}
 		}
@@ -986,15 +986,15 @@ void print_error_data(u64 *data)
 		length = EHEA_PAGESIZE;
 
 	if (type == 0x8) /* Queue Pair */
-		ehea_error("QP (resource=%lX) state: AER=0x%lX, AERR=0x%lX, "
-			   "port=%lX", resource, data[6], data[12], data[22]);
+		ehea_error("QP (resource=%llX) state: AER=0x%llX, AERR=0x%llX, "
+			   "port=%llX", resource, data[6], data[12], data[22]);
 
 	if (type == 0x4) /* Completion Queue */
-		ehea_error("CQ (resource=%lX) state: AER=0x%lX", resource,
+		ehea_error("CQ (resource=%llX) state: AER=0x%llX", resource,
 			   data[6]);
 
 	if (type == 0x3) /* Event Queue */
-		ehea_error("EQ (resource=%lX) state: AER=0x%lX", resource,
+		ehea_error("EQ (resource=%llX) state: AER=0x%llX", resource,
 			   data[6]);
 
 	ehea_dump(data, length, "error data");
@@ -1016,11 +1016,11 @@ void ehea_error_data(struct ehea_adapter *adapter, u64 res_handle)
 				rblock);
 
 	if (ret == H_R_STATE)
-		ehea_error("No error data is available: %lX.", res_handle);
+		ehea_error("No error data is available: %llX.", res_handle);
 	else if (ret == H_SUCCESS)
 		print_error_data(rblock);
 	else
-		ehea_error("Error data could not be fetched: %lX", res_handle);
+		ehea_error("Error data could not be fetched: %llX", res_handle);
 
 	kfree(rblock);
 }
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index ca3bb9f7321..dfa6348ac1d 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -602,7 +602,7 @@ static int ibmveth_open(struct net_device *netdev)
 
 	if(lpar_rc != H_SUCCESS) {
 		ibmveth_error_printk("h_register_logical_lan failed with %ld\n", lpar_rc);
-		ibmveth_error_printk("buffer TCE:0x%lx filter TCE:0x%lx rxq desc:0x%lx MAC:0x%lx\n",
+		ibmveth_error_printk("buffer TCE:0x%llx filter TCE:0x%llx rxq desc:0x%llx MAC:0x%llx\n",
 				     adapter->buffer_list_dma,
 				     adapter->filter_list_dma,
 				     rxq_desc.desc,
@@ -1378,13 +1378,13 @@ static int ibmveth_show(struct seq_file *seq, void *v)
 	seq_printf(seq, "Firmware MAC:    %pM\n", firmware_mac);
 
 	seq_printf(seq, "\nAdapter Statistics:\n");
-	seq_printf(seq, "  TX:  vio_map_single failres:      %ld\n", adapter->tx_map_failed);
-	seq_printf(seq, "       send failures:               %ld\n", adapter->tx_send_failed);
-	seq_printf(seq, "  RX:  replenish task cycles:       %ld\n", adapter->replenish_task_cycles);
-	seq_printf(seq, "       alloc_skb_failures:          %ld\n", adapter->replenish_no_mem);
-	seq_printf(seq, "       add buffer failures:         %ld\n", adapter->replenish_add_buff_failure);
-	seq_printf(seq, "       invalid buffers:             %ld\n", adapter->rx_invalid_buffer);
-	seq_printf(seq, "       no buffers:                  %ld\n", adapter->rx_no_buffer);
+	seq_printf(seq, "  TX:  vio_map_single failres:      %lld\n", adapter->tx_map_failed);
+	seq_printf(seq, "       send failures:               %lld\n", adapter->tx_send_failed);
+	seq_printf(seq, "  RX:  replenish task cycles:       %lld\n", adapter->replenish_task_cycles);
+	seq_printf(seq, "       alloc_skb_failures:          %lld\n", adapter->replenish_no_mem);
+	seq_printf(seq, "       add buffer failures:         %lld\n", adapter->replenish_add_buff_failure);
+	seq_printf(seq, "       invalid buffers:             %lld\n", adapter->rx_invalid_buffer);
+	seq_printf(seq, "       no buffers:                  %lld\n", adapter->rx_no_buffer);
 
 	return 0;
 }
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index c7457f97259..cb793c2bade 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -429,7 +429,7 @@ SIMPLE_PORT_ATTR(promiscuous);
 SIMPLE_PORT_ATTR(num_mcast);
 CUSTOM_PORT_ATTR(lpar_map, "0x%X\n", port->lpar_map);
 CUSTOM_PORT_ATTR(stopped_map, "0x%X\n", port->stopped_map);
-CUSTOM_PORT_ATTR(mac_addr, "0x%lX\n", port->mac_addr);
+CUSTOM_PORT_ATTR(mac_addr, "0x%llX\n", port->mac_addr);
 
 #define GET_PORT_ATTR(_name)	(&veth_port_attr_##_name.attr)
 static struct attribute *veth_port_default_attrs[] = {
-- 
GitLab


From 9fef3d2d15ae8ca24e4a145f2e189eea145d18c2 Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Thu, 8 Jan 2009 02:14:18 +0000
Subject: [PATCH 252/492] hvc_console: Change an mb() to smp_mb() and add some
 comments

I remember some history on this barrier.  There was a race between
open via /dev/console and the tty being fully setup.  Its also why
there is a temporary variable and the global is assigned at the end
of the function.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/char/hvc_console.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 5a8a4c28c86..f2685b747fb 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -876,8 +876,11 @@ static int hvc_init(void)
 		goto stop_thread;
 	}
 
-	/* FIXME: This mb() seems completely random.  Remove it. */
-	mb();
+	/*
+	 * Make sure tty is fully registered before allowing it to be
+	 * found by hvc_console_device.
+	 */
+	smp_mb();
 	hvc_driver = drv;
 	return 0;
 
-- 
GitLab


From c21f7a527f7757a0e246cea521a5dd3b8e1224d5 Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Thu, 8 Jan 2009 02:14:21 +0000
Subject: [PATCH 253/492] hvc_console: Call free_irq() only if request_irq()
 was successful

Only call free_irq if we marked the request_irq has having succeeded
instead of whenever the the sub-driver identified the interrupt to use.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/char/hvc_irq.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/hvc_irq.c b/drivers/char/hvc_irq.c
index d09e5688d44..2623e177e8d 100644
--- a/drivers/char/hvc_irq.c
+++ b/drivers/char/hvc_irq.c
@@ -37,7 +37,7 @@ int notifier_add_irq(struct hvc_struct *hp, int irq)
 
 void notifier_del_irq(struct hvc_struct *hp, int irq)
 {
-	if (!irq)
+	if (!hp->irq_requested)
 		return;
 	free_irq(irq, hp);
 	hp->irq_requested = 0;
-- 
GitLab


From da9dc13289fa58dced12f2baff51dfb87c339ba3 Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Thu, 8 Jan 2009 02:14:24 +0000
Subject: [PATCH 254/492] hvc_console: Do not set low_latency when using
 interrupts

hvc_console is setting low_latency unconditionally, but some clients are
interrupt driven and will call hvc_poll from irq context.  This will cause
tty_flip_buffer_push to be called from irq context, and it very clearly
states it must not be called from IRQ when low_latency is specified.

Looking back through history:
v2.6.16-rc1 via 33f0f88f1c51ae5c2d593d26960c760ea154c2e2
    [PATCH] TTY layer buffering revamp

added this new api.

v2.6.16-rc3 via 8977d929e49021d9a6e031310aab01fa72f849c2
    [PATCH] tty buffering stall fix

claims to fix a stall discovered with hvc_console

v2.6.16-rc5 via fb5c594c2acc441f0d2d8f457484a0e0e9285db3
   [PATCH] Fix race condition in hvc console.

said set this flag to avoid a stall problem, and was merged through
the powerpc arch tree.

Without searching for email discussions, it would appear to be an
overlapping "fix", but one that did not consider all users.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/char/hvc_console.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index f2685b747fb..0e18fdb9ddd 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -318,7 +318,8 @@ static int hvc_open(struct tty_struct *tty, struct file * filp)
 	} /* else count == 0 */
 
 	tty->driver_data = hp;
-	tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */
+	if (!hp->irq_requested)
+		tty->low_latency = 1; /* Makes flushes to ldisc synchronous. */
 
 	hp->tty = tty;
 
-- 
GitLab


From 2da7582f7cf5ef5e6adcf42537b6b8be06312152 Mon Sep 17 00:00:00 2001
From: Milton Miller <miltonm@bga.com>
Date: Thu, 8 Jan 2009 02:14:28 +0000
Subject: [PATCH 255/492] hvc_console: Use kzalloc() instead of kmalloc() +
 memset()

Replace kmalloc() + memset()  with kzalloc().

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 drivers/char/hvc_console.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 0e18fdb9ddd..09676b4e5d8 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -765,13 +765,11 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data,
 			return ERR_PTR(err);
 	}
 
-	hp = kmalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size,
+	hp = kzalloc(ALIGN(sizeof(*hp), sizeof(long)) + outbuf_size,
 			GFP_KERNEL);
 	if (!hp)
 		return ERR_PTR(-ENOMEM);
 
-	memset(hp, 0x00, sizeof(*hp));
-
 	hp->vtermno = vtermno;
 	hp->data = data;
 	hp->ops = ops;
-- 
GitLab


From fc7a9feb9c9df50ed6d115514b48c49e8511a4de Mon Sep 17 00:00:00 2001
From: Nathan Lynch <ntl@pobox.com>
Date: Fri, 9 Jan 2009 13:12:44 +0000
Subject: [PATCH 256/492] powerpc/cacheinfo: Rename cache_dir per-cpu variable

The per_cpu__ prefix on DECLARE_PER_CPU'd variables is going away;
rename cache_dir to cache_dir_pcpu.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/cacheinfo.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/powerpc/kernel/cacheinfo.c b/arch/powerpc/kernel/cacheinfo.c
index b33f0417a4b..bb37b1d19a5 100644
--- a/arch/powerpc/kernel/cacheinfo.c
+++ b/arch/powerpc/kernel/cacheinfo.c
@@ -113,7 +113,7 @@ struct cache {
 	struct cache *next_local;      /* next cache of >= level */
 };
 
-static DEFINE_PER_CPU(struct cache_dir *, cache_dir);
+static DEFINE_PER_CPU(struct cache_dir *, cache_dir_pcpu);
 
 /* traversal/modification of this list occurs only at cpu hotplug time;
  * access is serialized by cpu hotplug locking
@@ -468,9 +468,9 @@ static struct cache_dir *__cpuinit cacheinfo_create_cache_dir(unsigned int cpu_i
 
 	cache_dir->kobj = kobj;
 
-	WARN_ON_ONCE(per_cpu(cache_dir, cpu_id) != NULL);
+	WARN_ON_ONCE(per_cpu(cache_dir_pcpu, cpu_id) != NULL);
 
-	per_cpu(cache_dir, cpu_id) = cache_dir;
+	per_cpu(cache_dir_pcpu, cpu_id) = cache_dir;
 
 	return cache_dir;
 err:
@@ -820,13 +820,13 @@ void cacheinfo_cpu_offline(unsigned int cpu_id)
 
 	/* Prevent userspace from seeing inconsistent state - remove
 	 * the sysfs hierarchy first */
-	cache_dir = per_cpu(cache_dir, cpu_id);
+	cache_dir = per_cpu(cache_dir_pcpu, cpu_id);
 
 	/* careful, sysfs population may have failed */
 	if (cache_dir)
 		remove_cache_dir(cache_dir);
 
-	per_cpu(cache_dir, cpu_id) = NULL;
+	per_cpu(cache_dir_pcpu, cpu_id) = NULL;
 
 	/* clear the CPU's bit in its cache chain, possibly freeing
 	 * cache objects */
-- 
GitLab


From c478b58135e6c9b49c8b80bff8ef910f2ba9b313 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Sun, 11 Jan 2009 19:03:45 +0000
Subject: [PATCH 257/492] powerpc/powermac: Fix occasional SMP boot failure

The PowerMac kernel occasionally fails to bring up the secondary CPUs on
SMP, the trigger factor seem to be fairly random and related to location
of code and data.

This appears to be due to the initial loading of the TOC value by the
secondary processor which now happens before we clear HID4:RM_CI (Real
Mode Cache Invalidate). This bit should really be cleared before we do
any load or store other than fetching code.

This fix works based on the assumption that all SMP 64-bit PowerMacs use
variants of the 970, which fortunately is true, by explicitely clearing
that bit, adding an slbia for good measure as RM_CI mode is known to
create bogus ERAT entries.

I also removed some spurrious debug output that was left enabled by
mistake while at it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/kernel/head_64.S         | 9 +++++++++
 arch/powerpc/platforms/powermac/smp.c | 2 +-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index b4bcf5a930f..ebaedafc8e6 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -1518,6 +1518,15 @@ _GLOBAL(pmac_secondary_start)
 	/* turn on 64-bit mode */
 	bl	.enable_64b_mode
 
+	li	r0,0
+	mfspr	r3,SPRN_HID4
+	rldimi	r3,r0,40,23	/* clear bit 23 (rm_ci) */
+	sync
+	mtspr	SPRN_HID4,r3
+	isync
+	sync
+	slbia
+
 	/* get TOC pointer (real address) */
 	bl	.relative_toc
 
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 6b0711c15ec..bd8817b00fa 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -53,7 +53,7 @@
 #include <asm/pmac_low_i2c.h>
 #include <asm/pmac_pfunc.h>
 
-#define DEBUG
+#undef DEBUG
 
 #ifdef DEBUG
 #define DBG(fmt...) udbg_printf(fmt)
-- 
GitLab


From 061b908cf888c1bfd3dd1b91ce6f676e3bc42633 Mon Sep 17 00:00:00 2001
From: Michael Ellerman <michael@ellerman.id.au>
Date: Mon, 12 Jan 2009 16:30:00 +0000
Subject: [PATCH 258/492] powerpc: Enable PS3 options and QPACE in
 ppc64_defconfig

To increase the amount of code that's built for a defconfig build.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
 arch/powerpc/configs/ppc64_defconfig | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 069ae1bbac2..d4685d1c0be 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -211,11 +211,28 @@ CONFIG_PPC_PASEMI=y
 CONFIG_PPC_PASEMI_IOMMU=y
 # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
 CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_PS3=y
+
+#
+# PS3 Platform Options
+#
+# CONFIG_PS3_ADVANCED is not set
+CONFIG_PS3_HTAB_SIZE=20
+# CONFIG_PS3_DYNAMIC_DMA is not set
+CONFIG_PS3_VUART=y
+CONFIG_PS3_PS3AV=y
+CONFIG_PS3_SYS_MANAGER=y
+CONFIG_PS3_STORAGE=m
+CONFIG_PS3_DISK=m
+CONFIG_PS3_ROM=m
+CONFIG_PS3_FLASH=m
+CONFIG_PS3_LPM=m
 CONFIG_PPC_CELL=y
+CONFIG_PPC_CELL_COMMON=y
 CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
 CONFIG_PPC_CELLEB=y
+CONFIG_PPC_CELL_QPACE=y
 
 #
 # Cell Broadband Engine options
@@ -981,6 +998,9 @@ CONFIG_E1000=y
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 CONFIG_SPIDER_NET=m
+CONFIG_GELIC_NET=m
+CONFIG_GELIC_WIRELESS=y
+# CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1370,6 +1390,8 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_PM3 is not set
 # CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
+CONFIG_FB_PS3=m
+CONFIG_FB_PS3_DEFAULT_SIZE_M=9
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1492,6 +1514,8 @@ CONFIG_SND_PCI=y
 CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_PS3=m
+CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
-- 
GitLab


From d9736749f581abd80c2831244e2659e2e833b0e3 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= <khc@pm.waw.pl>
Date: Mon, 12 Jan 2009 16:31:54 -0800
Subject: [PATCH 259/492] WAN: Fix NAPI interface in IXP4xx HSS driver.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wan/ixp4xx_hss.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 2dc241689d3..0dbd85b0162 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -622,7 +622,7 @@ static void hss_hdlc_rx_irq(void *pdev)
 	printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
 #endif
 	qmgr_disable_irq(queue_ids[port->id].rx);
-	netif_rx_schedule(dev, &port->napi);
+	netif_rx_schedule(&port->napi);
 }
 
 static int hss_hdlc_poll(struct napi_struct *napi, int budget)
@@ -651,7 +651,7 @@ static int hss_hdlc_poll(struct napi_struct *napi, int budget)
 			printk(KERN_DEBUG "%s: hss_hdlc_poll"
 			       " netif_rx_complete\n", dev->name);
 #endif
-			netif_rx_complete(dev, napi);
+			netif_rx_complete(napi);
 			qmgr_enable_irq(rxq);
 			if (!qmgr_stat_empty(rxq) &&
 			    netif_rx_reschedule(napi)) {
@@ -1069,7 +1069,7 @@ static int hss_hdlc_open(struct net_device *dev)
 	hss_start_hdlc(port);
 
 	/* we may already have RX data, enables IRQ */
-	netif_rx_schedule(dev, &port->napi);
+	netif_rx_schedule(&port->napi);
 	return 0;
 
 err_unlock:
-- 
GitLab


From 985ebdb5ed54151eba734aa1b307460e8e4267ba Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= <khc@pm.waw.pl>
Date: Mon, 12 Jan 2009 16:32:13 -0800
Subject: [PATCH 260/492] net: Fix a comment in include/linux/netdevice.h.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix a comment in include/linux/netdevice.h.

Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netdevice.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index f2455681337..4647604c7ca 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -467,7 +467,7 @@ struct netdev_queue {
  *     This function is called when network device transistions to the down
  *     state.
  *
- * int (*ndo_hard_start_xmit)(struct sk_buff *skb, struct net_device *dev);
+ * int (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev);
  *	Called when a packet needs to be transmitted.
  *	Must return NETDEV_TX_OK , NETDEV_TX_BUSY, or NETDEV_TX_LOCKED,
  *	Required can not be NULL.
-- 
GitLab


From 88843104a19d5896bf67ab6bd685e976240dd04a Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Mon, 12 Jan 2009 00:06:00 +0000
Subject: [PATCH 261/492] netfilter 01/09: remove "happy cracking" message

Don't spam logs for locally generated short packets. these can only
be generated by root.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/netfilter/iptable_filter.c            | 7 +------
 net/ipv4/netfilter/iptable_mangle.c            | 6 +-----
 net/ipv4/netfilter/iptable_raw.c               | 6 +-----
 net/ipv4/netfilter/iptable_security.c          | 6 +-----
 net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c | 5 +----
 5 files changed, 5 insertions(+), 25 deletions(-)

diff --git a/net/ipv4/netfilter/iptable_filter.c b/net/ipv4/netfilter/iptable_filter.c
index c9224310eba..52cb6939d09 100644
--- a/net/ipv4/netfilter/iptable_filter.c
+++ b/net/ipv4/netfilter/iptable_filter.c
@@ -93,13 +93,8 @@ ipt_local_out_hook(unsigned int hook,
 {
 	/* root is playing with raw sockets. */
 	if (skb->len < sizeof(struct iphdr) ||
-	    ip_hdrlen(skb) < sizeof(struct iphdr)) {
-		if (net_ratelimit())
-			printk("iptable_filter: ignoring short SOCK_RAW "
-			       "packet.\n");
+	    ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
-	}
-
 	return ipt_do_table(skb, hook, in, out,
 			    dev_net(out)->ipv4.iptable_filter);
 }
diff --git a/net/ipv4/netfilter/iptable_mangle.c b/net/ipv4/netfilter/iptable_mangle.c
index 69f2c428714..3929d20b9e4 100644
--- a/net/ipv4/netfilter/iptable_mangle.c
+++ b/net/ipv4/netfilter/iptable_mangle.c
@@ -132,12 +132,8 @@ ipt_local_hook(unsigned int hook,
 
 	/* root is playing with raw sockets. */
 	if (skb->len < sizeof(struct iphdr)
-	    || ip_hdrlen(skb) < sizeof(struct iphdr)) {
-		if (net_ratelimit())
-			printk("iptable_mangle: ignoring short SOCK_RAW "
-			       "packet.\n");
+	    || ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
-	}
 
 	/* Save things which could affect route */
 	mark = skb->mark;
diff --git a/net/ipv4/netfilter/iptable_raw.c b/net/ipv4/netfilter/iptable_raw.c
index 8faebfe638f..7f65d18333e 100644
--- a/net/ipv4/netfilter/iptable_raw.c
+++ b/net/ipv4/netfilter/iptable_raw.c
@@ -65,12 +65,8 @@ ipt_local_hook(unsigned int hook,
 {
 	/* root is playing with raw sockets. */
 	if (skb->len < sizeof(struct iphdr) ||
-	    ip_hdrlen(skb) < sizeof(struct iphdr)) {
-		if (net_ratelimit())
-			printk("iptable_raw: ignoring short SOCK_RAW "
-			       "packet.\n");
+	    ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
-	}
 	return ipt_do_table(skb, hook, in, out,
 			    dev_net(out)->ipv4.iptable_raw);
 }
diff --git a/net/ipv4/netfilter/iptable_security.c b/net/ipv4/netfilter/iptable_security.c
index 36f3be3cc42..a52a35f4a58 100644
--- a/net/ipv4/netfilter/iptable_security.c
+++ b/net/ipv4/netfilter/iptable_security.c
@@ -96,12 +96,8 @@ ipt_local_out_hook(unsigned int hook,
 {
 	/* Somebody is playing with raw sockets. */
 	if (skb->len < sizeof(struct iphdr)
-	    || ip_hdrlen(skb) < sizeof(struct iphdr)) {
-		if (net_ratelimit())
-			printk(KERN_INFO "iptable_security: ignoring short "
-			       "SOCK_RAW packet.\n");
+	    || ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
-	}
 	return ipt_do_table(skb, hook, in, out,
 			    dev_net(out)->ipv4.iptable_security);
 }
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
index b2141e11575..4beb04fac58 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -145,11 +145,8 @@ static unsigned int ipv4_conntrack_local(unsigned int hooknum,
 {
 	/* root is playing with raw sockets. */
 	if (skb->len < sizeof(struct iphdr) ||
-	    ip_hdrlen(skb) < sizeof(struct iphdr)) {
-		if (net_ratelimit())
-			printk("ipt_hook: happy cracking.\n");
+	    ip_hdrlen(skb) < sizeof(struct iphdr))
 		return NF_ACCEPT;
-	}
 	return nf_conntrack_in(dev_net(out), PF_INET, hooknum, skb);
 }
 
-- 
GitLab


From a2bd40ad3151d4d346fd167e01fb84b06f7247fc Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Mon, 12 Jan 2009 00:06:02 +0000
Subject: [PATCH 262/492] netfilter 02/09: bridge: Fix handling of non-IP
 packets in FORWARD/POST_ROUTING

Currently the bridge FORWARD/POST_ROUTING chains treats all
non-IPv4 packets as IPv6.  This packet fixes that by returning
NF_ACCEPT on non-IP packets instead, just as is done in PRE_ROUTING.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/br_netfilter.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index a65e43a17fb..9a1cd757ec4 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -686,8 +686,11 @@ static unsigned int br_nf_forward_ip(unsigned int hook, struct sk_buff *skb,
 	if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) ||
 	    IS_PPPOE_IP(skb))
 		pf = PF_INET;
-	else
+	else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
+		 IS_PPPOE_IPV6(skb))
 		pf = PF_INET6;
+	else
+		return NF_ACCEPT;
 
 	nf_bridge_pull_encap_header(skb);
 
@@ -828,8 +831,11 @@ static unsigned int br_nf_post_routing(unsigned int hook, struct sk_buff *skb,
 	if (skb->protocol == htons(ETH_P_IP) || IS_VLAN_IP(skb) ||
 	    IS_PPPOE_IP(skb))
 		pf = PF_INET;
-	else
+	else if (skb->protocol == htons(ETH_P_IPV6) || IS_VLAN_IPV6(skb) ||
+		 IS_PPPOE_IPV6(skb))
 		pf = PF_INET6;
+	else
+		return NF_ACCEPT;
 
 #ifdef CONFIG_NETFILTER_DEBUG
 	if (skb->dst == NULL) {
-- 
GitLab


From 47e0e1ca13d64eeeb687995fbe4e239e743d7544 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Mon, 12 Jan 2009 00:06:03 +0000
Subject: [PATCH 263/492] netfilter 03/09: bridge: Disable PPPOE/VLAN
 processing by default

The PPPOE/VLAN processing code in the bridge netfilter is broken
by design.  The VLAN tag and the PPPOE session ID are an integral
part of the packet flow information, yet they're completely
ignored by the bridge netfilter.  This is potentially a security
hole as it treats all VLANs and PPPOE sessions as the same.

What's more, it's actually broken for PPPOE as the bridge netfilter
tries to trim the packets to the IP length without adjusting the
PPPOE header (and adjusting the PPPOE header isn't much better
since the PPPOE peer may require the padding to be present).

Therefore we should disable this by default.

It does mean that people relying on this feature may lose networking
depending on how their bridge netfilter rules are configured.
However, IMHO the problems this code causes are serious enough to
warrant this.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/br_netfilter.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c
index 9a1cd757ec4..cf754ace0b7 100644
--- a/net/bridge/br_netfilter.c
+++ b/net/bridge/br_netfilter.c
@@ -58,11 +58,11 @@ static struct ctl_table_header *brnf_sysctl_header;
 static int brnf_call_iptables __read_mostly = 1;
 static int brnf_call_ip6tables __read_mostly = 1;
 static int brnf_call_arptables __read_mostly = 1;
-static int brnf_filter_vlan_tagged __read_mostly = 1;
-static int brnf_filter_pppoe_tagged __read_mostly = 1;
+static int brnf_filter_vlan_tagged __read_mostly = 0;
+static int brnf_filter_pppoe_tagged __read_mostly = 0;
 #else
-#define brnf_filter_vlan_tagged 1
-#define brnf_filter_pppoe_tagged 1
+#define brnf_filter_vlan_tagged 0
+#define brnf_filter_pppoe_tagged 0
 #endif
 
 static inline __be16 vlan_proto(const struct sk_buff *skb)
-- 
GitLab


From 656caff20e12ba6e07b4bf342641df5ab33b4e49 Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Mon, 12 Jan 2009 00:06:04 +0000
Subject: [PATCH 264/492] netfilter 04/09: x_tables: fix match/target revision
 lookup

Commit 55b69e91 (netfilter: implement NFPROTO_UNSPEC as a wildcard
for extensions) broke revision probing for matches and targets that
are registered with NFPROTO_UNSPEC.

Fix by continuing the search on the NFPROTO_UNSPEC list if nothing
is found on the af-specific lists.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/x_tables.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/net/netfilter/x_tables.c b/net/netfilter/x_tables.c
index 89837a4eef7..bfbf521f6ea 100644
--- a/net/netfilter/x_tables.c
+++ b/net/netfilter/x_tables.c
@@ -273,6 +273,10 @@ static int match_revfn(u8 af, const char *name, u8 revision, int *bestp)
 				have_rev = 1;
 		}
 	}
+
+	if (af != NFPROTO_UNSPEC && !have_rev)
+		return match_revfn(NFPROTO_UNSPEC, name, revision, bestp);
+
 	return have_rev;
 }
 
@@ -289,6 +293,10 @@ static int target_revfn(u8 af, const char *name, u8 revision, int *bestp)
 				have_rev = 1;
 		}
 	}
+
+	if (af != NFPROTO_UNSPEC && !have_rev)
+		return target_revfn(NFPROTO_UNSPEC, name, revision, bestp);
+
 	return have_rev;
 }
 
-- 
GitLab


From d61ba9fd55b52a10b8e0ffd39bbc33587d3bfc8d Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Mon, 12 Jan 2009 00:06:06 +0000
Subject: [PATCH 265/492] netfilter 05/09: ebtables: fix inversion in match
 code

Commit 8cc784ee (netfilter: change return types of match functions
for ebtables extensions) broke ebtables matches by inverting the
sense of match/nomatch.

Reported-by: Matt Cross <matthltc@us.ibm.com>
Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/netfilter/ebtables.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c
index 8a8743d7d6e..820252aee81 100644
--- a/net/bridge/netfilter/ebtables.c
+++ b/net/bridge/netfilter/ebtables.c
@@ -79,7 +79,7 @@ static inline int ebt_do_match (struct ebt_entry_match *m,
 {
 	par->match     = m->u.match;
 	par->matchinfo = m->data;
-	return m->u.match->match(skb, par);
+	return m->u.match->match(skb, par) ? EBT_MATCH : EBT_NOMATCH;
 }
 
 static inline int ebt_dev_check(char *entry, const struct net_device *device)
-- 
GitLab


From 71320afcdb33b3f0b754ba1fac6a8c77aa469041 Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Mon, 12 Jan 2009 00:06:07 +0000
Subject: [PATCH 266/492] netfilter 06/09: nf_conntrack: fix ICMP/ICMPv6
 timeout sysctls on big-endian

An old bug crept back into the ICMP/ICMPv6 conntrack protocols: the timeout
values are defined as unsigned longs, the sysctl's maxsize is set to
sizeof(unsigned int). Use unsigned int for the timeout values as in the
other conntrack protocols.

Reported-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/netfilter/nf_conntrack_proto_icmp.c   | 2 +-
 net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
index 1fd3ef7718b..2a8bee26f43 100644
--- a/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
+++ b/net/ipv4/netfilter/nf_conntrack_proto_icmp.c
@@ -20,7 +20,7 @@
 #include <net/netfilter/nf_conntrack_core.h>
 #include <net/netfilter/nf_log.h>
 
-static unsigned long nf_ct_icmp_timeout __read_mostly = 30*HZ;
+static unsigned int nf_ct_icmp_timeout __read_mostly = 30*HZ;
 
 static bool icmp_pkt_to_tuple(const struct sk_buff *skb, unsigned int dataoff,
 			      struct nf_conntrack_tuple *tuple)
diff --git a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
index bd52151d31e..c455cf4ee75 100644
--- a/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
+++ b/net/ipv6/netfilter/nf_conntrack_proto_icmpv6.c
@@ -26,7 +26,7 @@
 #include <net/netfilter/ipv6/nf_conntrack_icmpv6.h>
 #include <net/netfilter/nf_log.h>
 
-static unsigned long nf_ct_icmpv6_timeout __read_mostly = 30*HZ;
+static unsigned int nf_ct_icmpv6_timeout __read_mostly = 30*HZ;
 
 static bool icmpv6_pkt_to_tuple(const struct sk_buff *skb,
 				unsigned int dataoff,
-- 
GitLab


From cd7fcbf1cb6933bfb9171452b4a370c92923544d Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Mon, 12 Jan 2009 00:06:08 +0000
Subject: [PATCH 267/492] netfilter 07/09: simplify nf_conntrack_alloc() error
 handling

nf_conntrack_alloc cannot return NULL, so there is no need to check for
NULL before using the value.  I have also removed the initialization of ct
to NULL in nf_conntrack_alloc, since the value is never used, and since
perhaps it might lead one to think that return ct at the end might return
NULL.

The semantic patch that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@match exists@
expression x, E;
position p1,p2;
statement S1, S2;
@@

x@p1 = nf_conntrack_alloc(...)
... when != x = E
(
  if (x@p2 == NULL || ...) S1 else S2
|
  if (x@p2 == NULL && ...) S1 else S2
)

@other_match exists@
expression match.x, E1, E2;
position p1!=match.p1,match.p2;
@@

x@p1 = E1
... when != x = E2
x@p2

@ script:python depends on !other_match@
p1 << match.p1;
p2 << match.p2;
@@

print "%s: call to nf_conntrack_alloc %s bad test %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/nf_conntrack_core.c    | 4 ++--
 net/netfilter/nf_conntrack_netlink.c | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index 7e83f74cd5d..90ce9ddb945 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -469,7 +469,7 @@ struct nf_conn *nf_conntrack_alloc(struct net *net,
 				   const struct nf_conntrack_tuple *repl,
 				   gfp_t gfp)
 {
-	struct nf_conn *ct = NULL;
+	struct nf_conn *ct;
 
 	if (unlikely(!nf_conntrack_hash_rnd_initted)) {
 		get_random_bytes(&nf_conntrack_hash_rnd, 4);
@@ -551,7 +551,7 @@ init_conntrack(struct net *net,
 	}
 
 	ct = nf_conntrack_alloc(net, tuple, &repl_tuple, GFP_ATOMIC);
-	if (ct == NULL || IS_ERR(ct)) {
+	if (IS_ERR(ct)) {
 		pr_debug("Can't allocate conntrack.\n");
 		return (struct nf_conntrack_tuple_hash *)ct;
 	}
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 00e8c27130f..3dddec6d2f7 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1134,7 +1134,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 	struct nf_conntrack_helper *helper;
 
 	ct = nf_conntrack_alloc(&init_net, otuple, rtuple, GFP_ATOMIC);
-	if (ct == NULL || IS_ERR(ct))
+	if (IS_ERR(ct))
 		return -ENOMEM;
 
 	if (!cda[CTA_TIMEOUT])
-- 
GitLab


From e6210f3be5b13b6cda9c8dad8926818a73c8e6ac Mon Sep 17 00:00:00 2001
From: Jan Engelhardt <jengelh@medozas.de>
Date: Mon, 12 Jan 2009 00:06:10 +0000
Subject: [PATCH 268/492] netfilter 08/09: xt_time: print timezone for user
 information

netfilter: xt_time: print timezone for user information

Let users have a way to figure out if their distro set the kernel
timezone at all.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/xt_time.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/net/netfilter/xt_time.c b/net/netfilter/xt_time.c
index 29375ba8db7..93acaa59d10 100644
--- a/net/netfilter/xt_time.c
+++ b/net/netfilter/xt_time.c
@@ -243,6 +243,17 @@ static struct xt_match xt_time_mt_reg __read_mostly = {
 
 static int __init time_mt_init(void)
 {
+	int minutes = sys_tz.tz_minuteswest;
+
+	if (minutes < 0) /* east of Greenwich */
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": kernel timezone is +%02d%02d\n",
+		       -minutes / 60, -minutes % 60);
+	else /* west of Greenwich */
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": kernel timezone is -%02d%02d\n",
+		       minutes / 60, minutes % 60);
+
 	return xt_register_match(&xt_time_mt_reg);
 }
 
-- 
GitLab


From daaf83d2b9277928739f3eb7ea64f49c1254fd62 Mon Sep 17 00:00:00 2001
From: Richard Kennedy <richard@rsk.demon.co.uk>
Date: Mon, 12 Jan 2009 00:06:11 +0000
Subject: [PATCH 269/492] netfilter 09/09: remove padding from struct xt_match
 on 64bit builds

reorder struct xt_match to remove 8 bytes of padding and make its size
128 bytes.

This saves a small amount of data space in each of the xt netfilter
modules and fits xt_match in one 128 byte cache line.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/netfilter/x_tables.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index e52ce475d19..c7ee8744d26 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -270,6 +270,7 @@ struct xt_match
 	struct list_head list;
 
 	const char name[XT_FUNCTION_MAXNAMELEN-1];
+	u_int8_t revision;
 
 	/* Return true or false: return FALSE and set *hotdrop = 1 to
            force immediate packet drop. */
@@ -302,7 +303,6 @@ struct xt_match
 	unsigned short proto;
 
 	unsigned short family;
-	u_int8_t revision;
 };
 
 /* Registration hooks for targets. */
-- 
GitLab


From c08513471911cf33cb50249a7ff12848374f7263 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Mon, 12 Jan 2009 21:54:16 -0800
Subject: [PATCH 270/492] pkt_sched: sch_htb: Consider used jiffies in
 htb_do_events()

Next event time should consider jiffies used for recounting. Otherwise
qdisc_watchdog_schedule() triggers hrtimer immediately with the event
in the past, and may cause very high ksoftirqd cpu usage (if highres
is on).

There is also removed checking "event" for zero in htb_dequeue(): it's
always true in this place.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_htb.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 5070643ce53..9ca8a26ba50 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -685,8 +685,8 @@ static psched_time_t htb_do_events(struct htb_sched *q, int level)
 		if (cl->cmode != HTB_CAN_SEND)
 			htb_add_to_wait_tree(q, cl, diff);
 	}
-	/* too much load - let's continue on next jiffie */
-	return q->now + PSCHED_TICKS_PER_SEC / HZ;
+	/* too much load - let's continue on next jiffie (including above) */
+	return q->now + 2 * PSCHED_TICKS_PER_SEC / HZ;
 }
 
 /* Returns class->node+prio from id-tree where classe's id is >= id. NULL
@@ -873,7 +873,7 @@ static struct sk_buff *htb_dequeue(struct Qdisc *sch)
 		} else
 			event = q->near_ev_cache[level];
 
-		if (event && next_event > event)
+		if (next_event > event)
 			next_event = event;
 
 		m = ~q->row_mask[level];
-- 
GitLab


From a73be040650463eacb95f83d2e6673ac57b4fc59 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Mon, 12 Jan 2009 21:54:40 -0800
Subject: [PATCH 271/492] pkt_sched: sch_htb: Break all htb_do_events() after 2
 jiffies

Currently htb_do_events() breaks events recounting for a level after 2
jiffies, but there is no reason to repeat this for next levels and
increase delays even more (with softirqs disabled). htb_dequeue_tree()
can add to this too, btw. In such a case q->now time is invalid anyway.

Thanks to Patrick McHardy for spotting an error around earlier version
of this patch.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_htb.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 9ca8a26ba50..2f0f0b04d3f 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -661,12 +661,13 @@ static void htb_charge_class(struct htb_sched *q, struct htb_class *cl,
  * next pending event (0 for no event in pq).
  * Note: Applied are events whose have cl->pq_key <= q->now.
  */
-static psched_time_t htb_do_events(struct htb_sched *q, int level)
+static psched_time_t htb_do_events(struct htb_sched *q, int level,
+				   unsigned long start)
 {
 	/* don't run for longer than 2 jiffies; 2 is used instead of
 	   1 to simplify things when jiffy is going to be incremented
 	   too soon */
-	unsigned long stop_at = jiffies + 2;
+	unsigned long stop_at = start + 2;
 	while (time_before(jiffies, stop_at)) {
 		struct htb_class *cl;
 		long diff;
@@ -845,6 +846,7 @@ static struct sk_buff *htb_dequeue(struct Qdisc *sch)
 	struct htb_sched *q = qdisc_priv(sch);
 	int level;
 	psched_time_t next_event;
+	unsigned long start_at;
 
 	/* try to dequeue direct packets as high prio (!) to minimize cpu work */
 	skb = __skb_dequeue(&q->direct_queue);
@@ -857,6 +859,7 @@ static struct sk_buff *htb_dequeue(struct Qdisc *sch)
 	if (!sch->q.qlen)
 		goto fin;
 	q->now = psched_get_time();
+	start_at = jiffies;
 
 	next_event = q->now + 5 * PSCHED_TICKS_PER_SEC;
 
@@ -866,7 +869,7 @@ static struct sk_buff *htb_dequeue(struct Qdisc *sch)
 		psched_time_t event;
 
 		if (q->now >= q->near_ev_cache[level]) {
-			event = htb_do_events(q, level);
+			event = htb_do_events(q, level, start_at);
 			if (!event)
 				event = q->now + PSCHED_TICKS_PER_SEC;
 			q->near_ev_cache[level] = event;
-- 
GitLab


From b74f62c1e736ea01c660355526dd54132d241ca9 Mon Sep 17 00:00:00 2001
From: Denis Joseph Barrow <D.Barow@option.com>
Date: Mon, 12 Jan 2009 21:56:49 -0800
Subject: [PATCH 272/492] hso: driver fix for big endian machines.

Filip Aben says this fix is neccessary for big endian machines.

Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/usb/hso.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index c4918b86ed1..d17dc5214c9 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1792,8 +1792,8 @@ static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
 
 	/* initialize */
 	ctrl_req->wValue = 0;
-	ctrl_req->wIndex = hso_port_to_mux(port);
-	ctrl_req->wLength = size;
+	ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
+	ctrl_req->wLength = cpu_to_le16(size);
 
 	if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
 		/* Reading command */
-- 
GitLab


From a6d0b91ae5dd01263530c96f9b29001cb1ed58b0 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Mon, 12 Jan 2009 21:57:34 -0800
Subject: [PATCH 273/492] gianfar: Fix soft lockup with multi-interrupt TSECs

This patch fixes following bug:

BUG: soft lockup - CPU#0 stuck for 61s! [S03mountvirtfs-:922]
Modules linked in:
NIP: c006505c LR: c00675f0 CTR: c0020438
REGS: c7a1db90 TRAP: 0901   Not tainted  (2.6.28-rc8-01311-g8c7396a)
MSR: 00009032 <EE,ME,IR,DR>  CR: 28248442  XER: 20000000
TASK = c7a288a0[922] 'S03mountvirtfs-' THREAD: c7a1c000
GPR00: 00009032 c7a1dc40 c7a288a0 00000024 c79a1840 00000000 00000300 00000020
GPR08: c035f97c 00000000 00004008 c04d5210 00000000
NIP [c006505c] handle_IRQ_event+0x34/0xb0
LR [c00675f0] handle_level_irq+0xa8/0x144
Call Trace:
[c7a1dc40] [c00204d8] ipic_mask_irq+0xa0/0xb4 (unreliable)
[c7a1dc60] [c00675f0] handle_level_irq+0xa8/0x144
[c7a1dc80] [c00067f8] do_IRQ+0x78/0x108
[c7a1dc90] [c0014d7c] ret_from_except+0x0/0x14
--- Exception: 501 at gfar_schedule_cleanup+0x54/0x7c
    LR = gfar_transmit+0x14/0x28
[c7a1dd50] [c0352a3c] _spin_unlock_irqrestore+0x18/0x30 (unreliable)
[c7a1dd60] [c01f49a8] gfar_transmit+0x14/0x28
[c7a1dd70] [c0065084] handle_IRQ_event+0x5c/0xb0
[c7a1dd90] [c00675f0] handle_level_irq+0xa8/0x144
[c7a1ddb0] [c00067f8] do_IRQ+0x78/0x108
[c7a1ddc0] [c0014d7c] ret_from_except+0x0/0x14
--- Exception: 501 at up_read+0x10/0x48
    LR = do_page_fault+0x2b0/0x3e0
[c7a1de80] [c7a177e8] 0xc7a177e8 (unreliable)
[c7a1de90] [c0017964] do_page_fault+0x2b0/0x3e0
[c7a1df40] [c0014b14] handle_page_fault+0xc/0x80
--- Exception: 301 at 0xfe98b7c
    LR = 0xfe989c0
Instruction dump:
7c0802a6 bf810010 7c9f2378 7c7c1b78 90010024 80040004 70090020 40820010
7c0000a6 60008000 7c000124 3bc00000 <3ba00000> 48000010 83ff0014 2f9f0000


The bug introduced by commit 8c7396aebb68994c0519e438eecdf4d5fa9c7844
("gianfar: Merge Tx and Rx interrupt for scheduling clean up ring").

The commit merged TX and RX interrupt code into a single routine that
schedules NAPI, but no locks were introduced. This causes irq races, so
when irqs are enabled and netif_rx_schedule_prep() returns 0, nobody
disable the interrupts again. This leads to interrupt storm and finally
to the lockup.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/gianfar.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index efcbeb6c867..ea530673236 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1622,10 +1622,18 @@ static int gfar_clean_tx_ring(struct net_device *dev)
 static void gfar_schedule_cleanup(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->txlock, flags);
+	spin_lock(&priv->rxlock);
+
 	if (netif_rx_schedule_prep(&priv->napi)) {
 		gfar_write(&priv->regs->imask, IMASK_RTX_DISABLED);
 		__netif_rx_schedule(&priv->napi);
 	}
+
+	spin_unlock(&priv->rxlock);
+	spin_unlock_irqrestore(&priv->txlock, flags);
 }
 
 /* Interrupt Handler for Transmit complete */
-- 
GitLab


From 859975764fa61e927e7a69f46a55a4ba415785dd Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@openvz.org>
Date: Mon, 12 Jan 2009 22:11:56 -0800
Subject: [PATCH 274/492] net: ppp_generic - fix regressions caused by IDR
 conversion

The commits:

	7a95d267fb62cd6b80ef73be0592bbbe1dbd5df7
	("net: ppp_generic - use idr technique instead of cardmaps")

	ab5024ab23b78c86a0a1425defcdde48710fe449
	("net: ppp_generic - use DEFINE_IDR for static initialization")

introduced usage of IDR functionality but broke userspace side.

Before this commits it was possible to allocate new ppp interface with
specified number. Now it fails with EINVAL.  Fix it by trying to
allocate interface with specified unit number and return EEXIST if
fail which allow pppd to ask us to allocate new unit number.

And fix messages on memory allocation fails - add details that it's
PPP module who is complaining.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ppp_generic.c | 43 +++++++++++++++++++++++++++++++++------
 1 file changed, 37 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 06b448285eb..7b2728b8f1b 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -250,6 +250,7 @@ static int ppp_connect_channel(struct channel *pch, int unit);
 static int ppp_disconnect_channel(struct channel *pch);
 static void ppp_destroy_channel(struct channel *pch);
 static int unit_get(struct idr *p, void *ptr);
+static int unit_set(struct idr *p, void *ptr, int n);
 static void unit_put(struct idr *p, int n);
 static void *unit_find(struct idr *p, int n);
 
@@ -2432,11 +2433,18 @@ ppp_create_interface(int unit, int *retp)
 	} else {
 		if (unit_find(&ppp_units_idr, unit))
 			goto out2; /* unit already exists */
-		else {
-			/* darn, someone is cheating us? */
-			*retp = -EINVAL;
+		/*
+		 * if caller need a specified unit number
+		 * lets try to satisfy him, otherwise --
+		 * he should better ask us for new unit number
+		 *
+		 * NOTE: yes I know that returning EEXIST it's not
+		 * fair but at least pppd will ask us to allocate
+		 * new unit in this case so user is happy :)
+		 */
+		unit = unit_set(&ppp_units_idr, ppp, unit);
+		if (unit < 0)
 			goto out2;
-		}
 	}
 
 	/* Initialize the new ppp unit */
@@ -2677,14 +2685,37 @@ static void __exit ppp_cleanup(void)
  * by holding all_ppp_mutex
  */
 
+/* associate pointer with specified number */
+static int unit_set(struct idr *p, void *ptr, int n)
+{
+	int unit, err;
+
+again:
+	if (!idr_pre_get(p, GFP_KERNEL)) {
+		printk(KERN_ERR "PPP: No free memory for idr\n");
+		return -ENOMEM;
+	}
+
+	err = idr_get_new_above(p, ptr, n, &unit);
+	if (err == -EAGAIN)
+		goto again;
+
+	if (unit != n) {
+		idr_remove(p, unit);
+		return -EINVAL;
+	}
+
+	return unit;
+}
+
 /* get new free unit number and associate pointer with it */
 static int unit_get(struct idr *p, void *ptr)
 {
 	int unit, err;
 
 again:
-	if (idr_pre_get(p, GFP_KERNEL) == 0) {
-		printk(KERN_ERR "Out of memory expanding drawable idr\n");
+	if (!idr_pre_get(p, GFP_KERNEL)) {
+		printk(KERN_ERR "PPP: No free memory for idr\n");
 		return -ENOMEM;
 	}
 
-- 
GitLab


From f9d088b2080b476c86f8ddbc274851b89668c6d7 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 13 Jan 2009 11:54:49 +0100
Subject: [PATCH 275/492] ALSA: hda - Fix a typo

Fix a typo in stac92hd83xxx_cfg_tbl[].  The actual number is identical
thus there is no behavior change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 35b83dc6e19..a4e2d8fcc8b 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1682,7 +1682,7 @@ static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = {
 static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = {
 	/* SigmaTel reference board */
 	SND_PCI_QUIRK(PCI_VENDOR_ID_INTEL, 0x2668,
-		      "DFI LanParty", STAC_92HD71BXX_REF),
+		      "DFI LanParty", STAC_92HD83XXX_REF),
 	{} /* terminator */
 };
 
-- 
GitLab


From f84e3e915ea03dfa6e32626fc25a4f284ef222ac Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 13 Jan 2009 12:32:21 +0100
Subject: [PATCH 276/492] ALSA: hda - Add support of NVidia MCP78 HDMI

Added the new id for NVidia MCP HDMI (10de:0007).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_nvhdmi.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c
index 96952a37d88..d57d8132a06 100644
--- a/sound/pci/hda/patch_nvhdmi.c
+++ b/sound/pci/hda/patch_nvhdmi.c
@@ -160,6 +160,7 @@ static int patch_nvhdmi(struct hda_codec *codec)
  */
 static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
 	{ .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi },
+	{ .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi },
 	{ .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi },
 	{ .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi },
 	{ .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi },
@@ -167,6 +168,7 @@ static struct hda_codec_preset snd_hda_preset_nvhdmi[] = {
 };
 
 MODULE_ALIAS("snd-hda-codec-id:10de0002");
+MODULE_ALIAS("snd-hda-codec-id:10de0006");
 MODULE_ALIAS("snd-hda-codec-id:10de0007");
 MODULE_ALIAS("snd-hda-codec-id:10de0067");
 MODULE_ALIAS("snd-hda-codec-id:10de8001");
-- 
GitLab


From dafb70ce1026d4d6ef1b16ad6996c9589bb11cce Mon Sep 17 00:00:00 2001
From: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Date: Tue, 13 Jan 2009 08:58:49 -0500
Subject: [PATCH 277/492] ALSA: hda - Add quirk for another HP dv5

Add the model=hp-m4 quirk for another HP dv5 (103c:3603)
Reference: kernel bug#12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org
---
 sound/pci/hda/patch_sigmatel.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index a4e2d8fcc8b..9acf2f0a2df 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1736,6 +1736,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
 		      "HP dv7", STAC_HP_M4),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc,
 		      "HP dv7", STAC_HP_M4),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3603,
+		      "HP dv5", STAC_HP_M4),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a,
 				"unknown HP", STAC_HP_M4),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
-- 
GitLab


From 85b9e4fe13de9b35af1dbd50acc5f4978b9119ee Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 12 Jan 2009 14:37:44 -0500
Subject: [PATCH 278/492] =?UTF-8?q?mac80211:=20fix=20"=E2=80=98ret?=
 =?UTF-8?q?=E2=80=99=20may=20be=20used=20uninitialized"=20warning?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

net/mac80211/ht.c: In function ‘ieee80211_start_tx_ba_session’:
net/mac80211/ht.c:472: warning: ‘ret’ may be used uninitialized in this function

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/ht.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index 5f510a13b9f..c5c0c527109 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -469,7 +469,7 @@ int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
 	struct ieee80211_sub_if_data *sdata;
 	u16 start_seq_num;
 	u8 *state;
-	int ret;
+	int ret = 0;
 
 	if ((tid >= STA_TID_NUM) || !(hw->flags & IEEE80211_HW_AMPDU_AGGREGATION))
 		return -EINVAL;
-- 
GitLab


From 922d8a0b6d82fb40ffb561576e3800c3784ff43d Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 12 Jan 2009 14:40:20 -0500
Subject: [PATCH 279/492] =?UTF-8?q?b43:=20fix=20"=E2=80=98gmode=E2=80=99?=
 =?UTF-8?q?=20may=20be=20used=20uninitialized"=20warning?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/net/wireless/b43/main.c: In function ‘b43_op_config’:
drivers/net/wireless/b43/main.c:3264: warning: ‘gmode’ may be used uninitialized

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 7b31a327b24..c788bad1066 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3261,7 +3261,7 @@ static int b43_switch_band(struct b43_wl *wl, struct ieee80211_channel *chan)
 	struct b43_wldev *down_dev;
 	struct b43_wldev *d;
 	int err;
-	bool gmode;
+	bool uninitialized_var(gmode);
 	int prev_status;
 
 	/* Find a device and PHY which supports the band. */
-- 
GitLab


From 08cb7e01678b0a8d95d76aa0a395f2d7390f7ee1 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 12 Jan 2009 14:43:18 -0500
Subject: [PATCH 280/492] =?UTF-8?q?b43legacy:=20fix=20"=E2=80=98up=5Fdev?=
 =?UTF-8?q?=E2=80=99=20may=20be=20used=20uninitialized"=20warning?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/net/wireless/b43legacy/main.c: In function ‘b43legacy_op_dev_config’:
drivers/net/wireless/b43legacy/main.c:2468: warning: ‘up_dev’ may be used uninitialized in this function

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43legacy/main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index c1324e31d2f..fb996c27a19 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -2465,7 +2465,7 @@ static void b43legacy_put_phy_into_reset(struct b43legacy_wldev *dev)
 static int b43legacy_switch_phymode(struct b43legacy_wl *wl,
 				      unsigned int new_mode)
 {
-	struct b43legacy_wldev *up_dev;
+	struct b43legacy_wldev *uninitialized_var(up_dev);
 	struct b43legacy_wldev *down_dev;
 	int err;
 	bool gmode = 0;
-- 
GitLab


From 25a4cceaa44a7f73c8f92e6177812347500a0b15 Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 12 Jan 2009 14:44:52 -0500
Subject: [PATCH 281/492] =?UTF-8?q?iwl3945:=20fix=20"=E2=80=98power=5Fidx?=
 =?UTF-8?q?=E2=80=99=20may=20be=20used=20uninitialized"=20warning?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/net/wireless/iwlwifi/iwl-3945.c: In function ‘iwl3945_txpower_set_from_eeprom’:
drivers/net/wireless/iwlwifi/iwl-3945.c:2222: warning: ‘power_idx’ may be used uninitialized in this function

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-3945.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 8fdb34222c0..45cfa1cf194 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -2219,7 +2219,7 @@ int iwl3945_txpower_set_from_eeprom(struct iwl3945_priv *priv)
 		/* set tx power value for all OFDM rates */
 		for (rate_index = 0; rate_index < IWL_OFDM_RATES;
 		     rate_index++) {
-			s32 power_idx;
+			s32 uninitialized_var(power_idx);
 			int rc;
 
 			/* use channel group's clip-power table,
-- 
GitLab


From 26d1597c9a4532eec74f9651c4c96483cb8892fe Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Mon, 12 Jan 2009 14:46:39 -0500
Subject: [PATCH 282/492] =?UTF-8?q?p54:=20fix=20"=E2=80=98ret=E2=80=99=20m?=
 =?UTF-8?q?ay=20be=20used=20uninitialized"=20warning?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

drivers/net/wireless/p54/p54common.c: In function ‘p54_config’:
drivers/net/wireless/p54/p54common.c:1853: warning: ‘ret’ may be used uninitialized in this function

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index cba89ed0f57..c6a370fa9bc 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -1850,7 +1850,7 @@ static void p54_remove_interface(struct ieee80211_hw *dev,
 
 static int p54_config(struct ieee80211_hw *dev, u32 changed)
 {
-	int ret;
+	int ret = 0;
 	struct p54_common *priv = dev->priv;
 	struct ieee80211_conf *conf = &dev->conf;
 
-- 
GitLab


From a0f79f7ad3e52b908786462cf5446ebe20fe14fa Mon Sep 17 00:00:00 2001
From: Christian Borntraeger <borntraeger@de.ibm.com>
Date: Tue, 13 Jan 2009 10:38:36 +0100
Subject: [PATCH 283/492] ata: fix wrong WARN_ON_ONCE

This patch fixes a wrong WARN_ON that was triggered by 32bit PIO support:
WARNING: at drivers/ata/libata-sff.c:1017 ata_sff_hsm_move+0x45e/0x750()

__atapi_pio_bytes simply doesnt know enough to decide if there is a bug.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-sff.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 0eae9b45355..5a4aad123c4 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1013,9 +1013,12 @@ next_sg:
 		qc->cursg_ofs = 0;
 	}
 
-	/* consumed can be larger than count only for the last transfer */
-	WARN_ON_ONCE(qc->cursg && count != consumed);
-
+	/*
+	 * There used to be a  WARN_ON_ONCE(qc->cursg && count != consumed);
+	 * Unfortunately __atapi_pio_bytes doesn't know enough to do the WARN
+	 * check correctly as it doesn't know if it is the last request being
+	 * made. Somebody should implement a proper sanity check.
+	 */
 	if (bytes)
 		goto next_sg;
 	return 0;
-- 
GitLab


From 4a99d95fa836e254d17910e52663ba2be7b880e7 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Sun, 11 Jan 2009 19:51:08 +0000
Subject: [PATCH 284/492] pata_it821x: Update RDC UDMA handling

The UDMA affliction is apparently specific to revision 0x11. Keeps us in sync
with drivers/ide current.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_it821x.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index f828a29d775..f1bb2f9fecb 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.4.0"
+#define DRV_VERSION "0.4.2"
 
 struct it821x_dev
 {
@@ -494,8 +494,6 @@ static int it821x_smart_set_mode(struct ata_link *link, struct ata_device **unus
  *	special. In our case we need to lock the sector count to avoid
  *	blowing the brains out of the firmware with large LBA48 requests
  *
- *	FIXME: When FUA appears we need to block FUA too. And SMART and
- *	basically we need to filter commands for this chip.
  */
 
 static void it821x_dev_config(struct ata_device *adev)
@@ -887,6 +885,13 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.port_ops = &it821x_passthru_port_ops
 	};
 	static const struct ata_port_info info_rdc = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		.udma_mask = ATA_UDMA6,
+		.port_ops = &it821x_rdc_port_ops
+	};
+	static const struct ata_port_info info_rdc_11 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
@@ -903,7 +908,11 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		return rc;
 		
 	if (pdev->vendor == PCI_VENDOR_ID_RDC) {
-		ppi[0] = &info_rdc;
+		/* Deal with Vortex86SX */
+		if (pdev->revision == 0x11)
+			ppi[0] = &info_rdc_11;
+		else
+			ppi[0] = &info_rdc;
 	} else {
 		/* Force the card into bypass mode if so requested */
 		if (it8212_noraid) {
-- 
GitLab


From 288e4877f94a3b144aadc206e7796921d02432c1 Mon Sep 17 00:00:00 2001
From: Dirk Hohndel <hohndel@linux.intel.com>
Date: Sun, 11 Jan 2009 15:33:51 +0000
Subject: [PATCH 285/492] Prevent oops at boot with VT-d

With some broken BIOSs when VT-d is enabled, the data structures are
filled incorrectly. This can cause a NULL pointer dereference in very
early boot.

Signed-off-by: Dirk Hohndel <hohndel@linux.intel.com>
Acked-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/pci/intel-iommu.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 235fb7a5a8a..3dfecb20d5e 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -438,7 +438,8 @@ static struct intel_iommu *device_to_iommu(u8 bus, u8 devfn)
 			continue;
 
 		for (i = 0; i < drhd->devices_cnt; i++)
-			if (drhd->devices[i]->bus->number == bus &&
+			if (drhd->devices[i] &&
+			    drhd->devices[i]->bus->number == bus &&
 			    drhd->devices[i]->devfn == devfn)
 				return drhd->iommu;
 
-- 
GitLab


From c107b41c485c43f15b24743e81eaab742b3c0b67 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 13 Jan 2009 17:46:37 +0100
Subject: [PATCH 286/492] ALSA: hda - Use queue_delayed_work()

Replaced the old schedule_work() with queue_delayed_work() where
overlooked in the previous patches.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_codec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 3c596da2b9b..fdad6ae7aad 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -2815,7 +2815,7 @@ void snd_hda_power_down(struct hda_codec *codec)
 		return;
 	if (power_save(codec)) {
 		codec->power_transition = 1; /* avoid reentrance */
-		schedule_delayed_work(&codec->power_work,
+		queue_delayed_work(codec->bus->workq, &codec->power_work,
 				msecs_to_jiffies(power_save(codec) * 1000));
 	}
 }
-- 
GitLab


From 417bec5b0f25e000866f1be845d44a3ca0690697 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 13 Jan 2009 17:57:12 +0100
Subject: [PATCH 287/492] ALSA: hda - Update model descriptions in
 patch_sigmatel.c

Update models in patch_sigmatel.c, mainly for the last Gateway updates.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 Documentation/sound/alsa/HD-Audio-Models.txt | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index 4b7ac21ea9e..64eb1100eec 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -275,7 +275,8 @@ STAC9200
   dell-m25	Dell Inspiron E1505n
   dell-m26	Dell Inspiron 1501
   dell-m27	Dell Inspiron E1705/9400
-  gateway	Gateway laptops with EAPD control
+  gateway-m4	Gateway laptops with EAPD control
+  gateway-m4-2	Gateway laptops with EAPD control
   panasonic	Panasonic CF-74
 
 STAC9205/9254
@@ -302,6 +303,7 @@ STAC9220/9221
   macbook-pro	Intel Mac Book Pro 2nd generation (eq. type 3)
   imac-intel	Intel iMac (eq. type 2)
   imac-intel-20	Intel iMac (newer version) (eq. type 3)
+  ecs202	ECS/PC chips
   dell-d81	Dell (unknown)
   dell-d82	Dell (unknown)
   dell-m81	Dell (unknown)
@@ -310,9 +312,13 @@ STAC9220/9221
 STAC9202/9250/9251
 ==================
   ref		Reference board, base config
+  m1		Some Gateway MX series laptops (NX560XL)
+  m1-2		Some Gateway MX series laptops (MX6453)
+  m2		Some Gateway MX series laptops (M255)
   m2-2		Some Gateway MX series laptops
+  m3		Some Gateway MX series laptops
+  m5		Some Gateway MX series laptops (MP6954)
   m6		Some Gateway NX series laptops
-  pa6		Gateway NX860 series
 
 STAC9227/9228/9229/927x
 =======================
@@ -329,6 +335,7 @@ STAC92HD71B*
   dell-m4-1	Dell desktops
   dell-m4-2	Dell desktops
   dell-m4-3	Dell desktops
+  hp-m4		HP dv laptops
 
 STAC92HD73*
 ===========
@@ -337,6 +344,7 @@ STAC92HD73*
   dell-m6-amic	Dell desktops/laptops with analog mics
   dell-m6-dmic	Dell desktops/laptops with digital mics
   dell-m6	Dell desktops/laptops with both type of mics
+  dell-eq	Dell desktops/laptops
 
 STAC92HD83*
 ===========
-- 
GitLab


From a36706131182f5507d1e2cfbf391b0fa8d72203c Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Fri, 9 Jan 2009 16:13:09 -0800
Subject: [PATCH 288/492] x86 PAT: remove PFNMAP type on track_pfn_vma_new()
 error

Impact: fix (harmless) double-free of memtype entries and avoid warning

On track_pfn_vma_new() failure, reset the vm_flags so that there will be
no second cleanup happening when upper level routines call unmap_vmas().

This patch fixes part of the bug reported here:

  http://marc.info/?l=linux-kernel&m=123108883716357&w=2

Specifically the error message:

  X:5010 freeing invalid memtype d0000000-d0101000

Is due to multiple frees on error path, will not happen with the patch below.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 mm/memory.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/mm/memory.c b/mm/memory.c
index c2d4c477e5b..d3ee2ea5615 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1672,8 +1672,14 @@ int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr,
 	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
 
 	err = track_pfn_vma_new(vma, prot, pfn, PAGE_ALIGN(size));
-	if (err)
+	if (err) {
+		/*
+		 * To indicate that track_pfn related cleanup is not
+		 * needed from higher level routine calling unmap_vmas
+		 */
+		vma->vm_flags &= ~(VM_IO | VM_RESERVED | VM_PFNMAP);
 		return -EINVAL;
+	}
 
 	BUG_ON(addr >= end);
 	pfn -= addr >> PAGE_SHIFT;
-- 
GitLab


From afc7d20c8429f32f19d47367fdc36eeed2334ec3 Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Fri, 9 Jan 2009 16:13:10 -0800
Subject: [PATCH 289/492] x86 PAT: consolidate old memtype new memtype check
 into a function

Impact: cleanup

Move the new memtype old memtype allowed check to header so that is can be
shared by other users. Subsequent patch uses this in pat.c in remap_pfn_range()
code path. No functionality change in this patch.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/pgtable.h | 19 +++++++++++++++++++
 arch/x86/pci/i386.c            | 12 +-----------
 2 files changed, 20 insertions(+), 11 deletions(-)

diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h
index 83e69f4a37f..06bbcbd66e9 100644
--- a/arch/x86/include/asm/pgtable.h
+++ b/arch/x86/include/asm/pgtable.h
@@ -341,6 +341,25 @@ static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
 
 #define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
 
+static inline int is_new_memtype_allowed(unsigned long flags,
+						unsigned long new_flags)
+{
+	/*
+	 * Certain new memtypes are not allowed with certain
+	 * requested memtype:
+	 * - request is uncached, return cannot be write-back
+	 * - request is write-combine, return cannot be write-back
+	 */
+	if ((flags == _PAGE_CACHE_UC_MINUS &&
+	     new_flags == _PAGE_CACHE_WB) ||
+	    (flags == _PAGE_CACHE_WC &&
+	     new_flags == _PAGE_CACHE_WB)) {
+		return 0;
+	}
+
+	return 1;
+}
+
 #ifndef __ASSEMBLY__
 /* Indicate that x86 has its own track and untrack pfn vma functions */
 #define __HAVE_PFNMAP_TRACKING
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index f884740da31..5ead808dd70 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -314,17 +314,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 		return retval;
 
 	if (flags != new_flags) {
-		/*
-		 * Do not fallback to certain memory types with certain
-		 * requested type:
-		 * - request is uncached, return cannot be write-back
-		 * - request is uncached, return cannot be write-combine
-		 * - request is write-combine, return cannot be write-back
-		 */
-		if ((flags == _PAGE_CACHE_UC_MINUS &&
-		     (new_flags == _PAGE_CACHE_WB)) ||
-		    (flags == _PAGE_CACHE_WC &&
-		     new_flags == _PAGE_CACHE_WB)) {
+		if (!is_new_memtype_allowed(flags, new_flags)) {
 			free_memtype(addr, addr+len);
 			return -EINVAL;
 		}
-- 
GitLab


From e4b866ed197cef9989348e0479fed8d864ea465b Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Fri, 9 Jan 2009 16:13:11 -0800
Subject: [PATCH 290/492] x86 PAT: change track_pfn_vma_new to take pgprot_t
 pointer param

Impact: cleanup

Change the protection parameter for track_pfn_vma_new() into a pgprot_t pointer.
Subsequent patch changes the x86 PAT handling to return a compatible
memtype in pgprot_t, if what was requested cannot be allowed due to conflicts.
No fuctionality change in this patch.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pat.c             | 6 +++---
 include/asm-generic/pgtable.h | 4 ++--
 mm/memory.c                   | 7 ++++---
 3 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 85cbd3cd372..f88ac80530c 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -741,7 +741,7 @@ cleanup_ret:
  * Note that this function can be called with caller trying to map only a
  * subrange/page inside the vma.
  */
-int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,
+int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 			unsigned long pfn, unsigned long size)
 {
 	int retval = 0;
@@ -758,14 +758,14 @@ int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,
 	if (is_linear_pfn_mapping(vma)) {
 		/* reserve the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
-		return reserve_pfn_range(paddr, vma_size, prot);
+		return reserve_pfn_range(paddr, vma_size, *prot);
 	}
 
 	/* reserve page by page using pfn and size */
 	base_paddr = (resource_size_t)pfn << PAGE_SHIFT;
 	for (i = 0; i < size; i += PAGE_SIZE) {
 		paddr = base_paddr + i;
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, prot);
+		retval = reserve_pfn_range(paddr, PAGE_SIZE, *prot);
 		if (retval)
 			goto cleanup_ret;
 	}
diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
index 72ebe91005a..8e6d0ca70ab 100644
--- a/include/asm-generic/pgtable.h
+++ b/include/asm-generic/pgtable.h
@@ -301,7 +301,7 @@ static inline void ptep_modify_prot_commit(struct mm_struct *mm,
  * track_pfn_vma_new is called when a _new_ pfn mapping is being established
  * for physical range indicated by pfn and size.
  */
-static inline int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,
+static inline int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 					unsigned long pfn, unsigned long size)
 {
 	return 0;
@@ -332,7 +332,7 @@ static inline void untrack_pfn_vma(struct vm_area_struct *vma,
 {
 }
 #else
-extern int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t prot,
+extern int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 				unsigned long pfn, unsigned long size);
 extern int track_pfn_vma_copy(struct vm_area_struct *vma);
 extern void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
diff --git a/mm/memory.c b/mm/memory.c
index d3ee2ea5615..22bfa7a47a0 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1511,6 +1511,7 @@ int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr,
 			unsigned long pfn)
 {
 	int ret;
+	pgprot_t pgprot = vma->vm_page_prot;
 	/*
 	 * Technically, architectures with pte_special can avoid all these
 	 * restrictions (same for remap_pfn_range).  However we would like
@@ -1525,10 +1526,10 @@ int vm_insert_pfn(struct vm_area_struct *vma, unsigned long addr,
 
 	if (addr < vma->vm_start || addr >= vma->vm_end)
 		return -EFAULT;
-	if (track_pfn_vma_new(vma, vma->vm_page_prot, pfn, PAGE_SIZE))
+	if (track_pfn_vma_new(vma, &pgprot, pfn, PAGE_SIZE))
 		return -EINVAL;
 
-	ret = insert_pfn(vma, addr, pfn, vma->vm_page_prot);
+	ret = insert_pfn(vma, addr, pfn, pgprot);
 
 	if (ret)
 		untrack_pfn_vma(vma, pfn, PAGE_SIZE);
@@ -1671,7 +1672,7 @@ int remap_pfn_range(struct vm_area_struct *vma, unsigned long addr,
 
 	vma->vm_flags |= VM_IO | VM_RESERVED | VM_PFNMAP;
 
-	err = track_pfn_vma_new(vma, prot, pfn, PAGE_ALIGN(size));
+	err = track_pfn_vma_new(vma, &prot, pfn, PAGE_ALIGN(size));
 	if (err) {
 		/*
 		 * To indicate that track_pfn related cleanup is not
-- 
GitLab


From cdecff6864a1cd352a41d44a65e7451b8ef5cee2 Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Fri, 9 Jan 2009 16:13:12 -0800
Subject: [PATCH 291/492] x86 PAT: return compatible mapping to remap_pfn_range
 callers

Impact: avoid warning message, potentially solve 3D performance regression

Change x86 PAT code to return compatible memtype if the exact memtype that
was requested in remap_pfn_rage and friends is not available due to some
conflict.

This is done by returning the compatible type in pgprot parameter of
track_pfn_vma_new(), and the caller uses that memtype for page table.

Note that track_pfn_vma_copy() which is basically called during fork gets the
prot from existing page table and should not have any conflict. Hence we use
strict memtype check there and do not allow compatible memtypes.

This patch fixes the bug reported here:

  http://marc.info/?l=linux-kernel&m=123108883716357&w=2

Specifically the error message:

  X:5010 map pfn expected mapping type write-back for d0000000-d0101000,
  got write-combining

Should go away.

Reported-and-bisected-by: Kevin Winchester <kjwinchester@gmail.com>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pat.c | 43 ++++++++++++++++++++++++++++---------------
 1 file changed, 28 insertions(+), 15 deletions(-)

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index f88ac80530c..8b08fb95527 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -601,12 +601,13 @@ void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
  * Reserved non RAM regions only and after successful reserve_memtype,
  * this func also keeps identity mapping (if any) in sync with this new prot.
  */
-static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t vma_prot)
+static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
+				int strict_prot)
 {
 	int is_ram = 0;
 	int id_sz, ret;
 	unsigned long flags;
-	unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
+	unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
 
 	is_ram = pagerange_is_ram(paddr, paddr + size);
 
@@ -625,15 +626,24 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t vma_prot)
 		return ret;
 
 	if (flags != want_flags) {
-		free_memtype(paddr, paddr + size);
-		printk(KERN_ERR
-		"%s:%d map pfn expected mapping type %s for %Lx-%Lx, got %s\n",
-			current->comm, current->pid,
-			cattr_name(want_flags),
-			(unsigned long long)paddr,
-			(unsigned long long)(paddr + size),
-			cattr_name(flags));
-		return -EINVAL;
+		if (strict_prot || !is_new_memtype_allowed(want_flags, flags)) {
+			free_memtype(paddr, paddr + size);
+			printk(KERN_ERR "%s:%d map pfn expected mapping type %s"
+				" for %Lx-%Lx, got %s\n",
+				current->comm, current->pid,
+				cattr_name(want_flags),
+				(unsigned long long)paddr,
+				(unsigned long long)(paddr + size),
+				cattr_name(flags));
+			return -EINVAL;
+		}
+		/*
+		 * We allow returning different type than the one requested in
+		 * non strict case.
+		 */
+		*vma_prot = __pgprot((pgprot_val(*vma_prot) &
+				      (~_PAGE_CACHE_MASK)) |
+				     flags);
 	}
 
 	/* Need to keep identity mapping in sync */
@@ -689,6 +699,7 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 	unsigned long vma_start = vma->vm_start;
 	unsigned long vma_end = vma->vm_end;
 	unsigned long vma_size = vma_end - vma_start;
+	pgprot_t pgprot;
 
 	if (!pat_enabled)
 		return 0;
@@ -702,7 +713,8 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 			WARN_ON_ONCE(1);
 			return -EINVAL;
 		}
-		return reserve_pfn_range(paddr, vma_size, __pgprot(prot));
+		pgprot = __pgprot(prot);
+		return reserve_pfn_range(paddr, vma_size, &pgprot, 1);
 	}
 
 	/* reserve entire vma page by page, using pfn and prot from pte */
@@ -710,7 +722,8 @@ int track_pfn_vma_copy(struct vm_area_struct *vma)
 		if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
 			continue;
 
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, __pgprot(prot));
+		pgprot = __pgprot(prot);
+		retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1);
 		if (retval)
 			goto cleanup_ret;
 	}
@@ -758,14 +771,14 @@ int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
 	if (is_linear_pfn_mapping(vma)) {
 		/* reserve the whole chunk starting from vm_pgoff */
 		paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
-		return reserve_pfn_range(paddr, vma_size, *prot);
+		return reserve_pfn_range(paddr, vma_size, prot, 0);
 	}
 
 	/* reserve page by page using pfn and size */
 	base_paddr = (resource_size_t)pfn << PAGE_SHIFT;
 	for (i = 0; i < size; i += PAGE_SIZE) {
 		paddr = base_paddr + i;
-		retval = reserve_pfn_range(paddr, PAGE_SIZE, *prot);
+		retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0);
 		if (retval)
 			goto cleanup_ret;
 	}
-- 
GitLab


From 58dab916dfb57328d50deb0aa9b3fc92efa248ff Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Fri, 9 Jan 2009 16:13:14 -0800
Subject: [PATCH 292/492] x86 PAT: remove CPA WARN_ON for zero pte

Impact: reduce scope of debug check - avoid warnings

The logic to find whether identity map exists or not using
high_memory or max_low_pfn_mapped/max_pfn_mapped are not complete
as the memory withing the range may not be mapped if there is a
unusable hole in e820.

Specifically, on my test system I started seeing these warnings with
tools like hwinfo, acpidump trying to map ACPI region.

[   27.400018] ------------[ cut here ]------------
[   27.400344] WARNING: at /home/venkip/src/linus/linux-2.6/arch/x86/mm/pageattr.c:560 __change_page_attr_set_clr+0xf3/0x8b8()
[   27.400821] Hardware name: X7DB8
[   27.401070] CPA: called for zero pte. vaddr = ffff8800cff6a000 cpa->vaddr = ffff8800cff6a000
[   27.401569] Modules linked in:
[   27.401882] Pid: 4913, comm: dmidecode Not tainted 2.6.28-05716-gfe0bdec #586
[   27.402141] Call Trace:
[   27.402488]  [<ffffffff80237c21>] warn_slowpath+0xd3/0x10f
[   27.402749]  [<ffffffff80274ade>] ? find_get_page+0xb3/0xc9
[   27.403028]  [<ffffffff80274a2b>] ? find_get_page+0x0/0xc9
[   27.403333]  [<ffffffff80226425>] __change_page_attr_set_clr+0xf3/0x8b8
[   27.403628]  [<ffffffff8028ec99>] ? __purge_vmap_area_lazy+0x192/0x1a1
[   27.403883]  [<ffffffff8028eb52>] ? __purge_vmap_area_lazy+0x4b/0x1a1
[   27.404172]  [<ffffffff80290268>] ? vm_unmap_aliases+0x1ab/0x1bb
[   27.404512]  [<ffffffff80290105>] ? vm_unmap_aliases+0x48/0x1bb
[   27.404766]  [<ffffffff80226d28>] change_page_attr_set_clr+0x13e/0x2e6
[   27.405026]  [<ffffffff80698fa7>] ? _spin_unlock+0x26/0x2a
[   27.405292]  [<ffffffff80227e6a>] ? reserve_memtype+0x19b/0x4e3
[   27.405590]  [<ffffffff80226ffd>] _set_memory_wb+0x22/0x24
[   27.405844]  [<ffffffff80225d28>] ioremap_change_attr+0x26/0x28
[   27.406097]  [<ffffffff80228355>] reserve_pfn_range+0x1a3/0x235
[   27.406427]  [<ffffffff80228430>] track_pfn_vma_new+0x49/0xb3
[   27.406686]  [<ffffffff80286c46>] remap_pfn_range+0x94/0x32c
[   27.406940]  [<ffffffff8022878d>] ? phys_mem_access_prot_allowed+0xb5/0x1a8
[   27.407209]  [<ffffffff803e9bf4>] mmap_mem+0x75/0x9d
[   27.407523]  [<ffffffff8028b3b4>] mmap_region+0x2cf/0x53e
[   27.407776]  [<ffffffff8028b8cc>] do_mmap_pgoff+0x2a9/0x30d
[   27.408034]  [<ffffffff8020f4a4>] sys_mmap+0x92/0xce
[   27.408339]  [<ffffffff8020b65b>] system_call_fastpath+0x16/0x1b
[   27.408614] ---[ end trace 4b16ad70c09a602d ]---
[   27.408871] dmidecode:4913 reserve_pfn_range ioremap_change_attr failed write-back for cff6a000-cff6b000

This is wih track_pfn_vma_new trying to keep identity map in sync.
The address cff6a000 is the ACPI region according to e820.

[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
[    0.000000]  BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cff60000 (usable)
[    0.000000]  BIOS-e820: 00000000cff60000 - 00000000cff69000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cff69000 - 00000000cff80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000230000000 (usable)

And is not mapped as per init_memory_mapping.

[    0.000000] init_memory_mapping: 0000000000000000-00000000cff60000
[    0.000000] init_memory_mapping: 0000000100000000-0000000230000000

We can add logic to check for this. But, there can also be other holes in
identity map when we have 1GB of aligned reserved space in e820.

This patch handles it by removing the WARN_ON and returning a specific
error value (EFAULT) to indicate that the address does not have any
identity mapping.

The code that tries to keep identity map in sync can ignore
this error, with other callers of cpa still getting error here.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pageattr.c | 10 ++++++----
 arch/x86/mm/pat.c      | 45 ++++++++++++++++++++++++++++++------------
 2 files changed, 38 insertions(+), 17 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index e89d24815f2..4cf30dee816 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -555,10 +555,12 @@ repeat:
 	if (!pte_val(old_pte)) {
 		if (!primary)
 			return 0;
-		WARN(1, KERN_WARNING "CPA: called for zero pte. "
-		       "vaddr = %lx cpa->vaddr = %lx\n", address,
-		       *cpa->vaddr);
-		return -EINVAL;
+
+		/*
+		 *  Special error value returned, indicating that the mapping
+		 * did not exist at this address.
+		 */
+		return -EFAULT;
 	}
 
 	if (level == PG_LEVEL_4K) {
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 8b08fb95527..160c42d3eb8 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -505,6 +505,35 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 }
 #endif /* CONFIG_STRICT_DEVMEM */
 
+/*
+ * Change the memory type for the physial address range in kernel identity
+ * mapping space if that range is a part of identity map.
+ */
+static int kernel_map_sync_memtype(u64 base, unsigned long size,
+					unsigned long flags)
+{
+	unsigned long id_sz;
+	int ret;
+
+	if (!pat_enabled || base >= __pa(high_memory))
+		return 0;
+
+	id_sz = (__pa(high_memory) < base + size) ?
+						__pa(high_memory) - base :
+						size;
+
+	ret = ioremap_change_attr((unsigned long)__va(base), id_sz, flags);
+	/*
+	 * -EFAULT return means that the addr was not valid and did not have
+	 * any identity mapping. That case is a success for
+	 * kernel_map_sync_memtype.
+	 */
+	if (ret == -EFAULT)
+		ret = 0;
+
+	return ret;
+}
+
 int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
 {
@@ -555,9 +584,7 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 	if (retval < 0)
 		return 0;
 
-	if (((pfn < max_low_pfn_mapped) ||
-	     (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) &&
-	    ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) {
+	if (kernel_map_sync_memtype(offset, size, flags)) {
 		free_memtype(offset, offset + size);
 		printk(KERN_INFO
 		"%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
@@ -605,7 +632,7 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 				int strict_prot)
 {
 	int is_ram = 0;
-	int id_sz, ret;
+	int ret;
 	unsigned long flags;
 	unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
 
@@ -646,15 +673,7 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 				     flags);
 	}
 
-	/* Need to keep identity mapping in sync */
-	if (paddr >= __pa(high_memory))
-		return 0;
-
-	id_sz = (__pa(high_memory) < paddr + size) ?
-				__pa(high_memory) - paddr :
-				size;
-
-	if (ioremap_change_attr((unsigned long)__va(paddr), id_sz, flags) < 0) {
+	if (kernel_map_sync_memtype(paddr, size, flags)) {
 		free_memtype(paddr, paddr + size);
 		printk(KERN_ERR
 			"%s:%d reserve_pfn_range ioremap_change_attr failed %s "
-- 
GitLab


From e6b50c8d58bde1cdc5c9c9520be7ed8921d26aab Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Sat, 10 Jan 2009 10:40:42 +0000
Subject: [PATCH 293/492] TWL4030: fix clk API usage

Always pass a struct device if one is available; and there's really
no reason for the processor specific stuff in this file if only
people would follow the API usage properly by using the struct device.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/mfd/twl4030-core.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index b59c385cbc1..4a488be91ed 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -646,7 +646,7 @@ static inline int __init unprotect_pm_master(void)
 	return e;
 }
 
-static void __init clocks_init(void)
+static void __init clocks_init(struct device *dev)
 {
 	int e = 0;
 	struct clk *osc;
@@ -655,9 +655,9 @@ static void __init clocks_init(void)
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 	if (cpu_is_omap2430())
-		osc = clk_get(NULL, "osc_ck");
+		osc = clk_get(dev, "osc_ck");
 	else
-		osc = clk_get(NULL, "osc_sys_ck");
+		osc = clk_get(dev, "osc_sys_ck");
 
 	if (IS_ERR(osc)) {
 		printk(KERN_WARNING "Skipping twl4030 internal clock init and "
@@ -773,7 +773,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	inuse = true;
 
 	/* setup clock framework */
-	clocks_init();
+	clocks_init(&client->dev);
 
 	/* Maybe init the T2 Interrupt subsystem */
 	if (client->irq
-- 
GitLab


From 125c97d8a59888c5678734c2b70cbd08c847bd99 Mon Sep 17 00:00:00 2001
From: Helge Deller <deller@gmx.de>
Date: Tue, 13 Jan 2009 22:51:07 +0100
Subject: [PATCH 294/492] fix early_serial_setup() regression

Commit b430428a188e8a434325e251d0704af4b88b4711 ("8250: Don't clobber
spinlocks.") introduced a regression on the parisc architecture, which
broke the handover to the serial port at boottime.

early_serial_setup() was changed to only copy a subset of the uart_port
fields, and sadly the "type" and "line" fields were forgotten and thus
the serial port was not initialized and could not be used for a
handover.  This patch fixes this by copying the missing fields.

As this change to early_serial_setup() doesn't need an initialized
spinlock in the uart_port struct any longer, we can drop the spinlock
initialization in the superio driver.

Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Tomaso Paoletti <tpaoletti@caviumnetworks.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/parisc/superio.c | 1 -
 drivers/serial/8250.c    | 2 ++
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/parisc/superio.c b/drivers/parisc/superio.c
index 1e93c837514..4fa3bb2ddfe 100644
--- a/drivers/parisc/superio.c
+++ b/drivers/parisc/superio.c
@@ -405,7 +405,6 @@ static void __init superio_serial_init(void)
 	serial_port.type	= PORT_16550A;
 	serial_port.uartclk	= 115200*16;
 	serial_port.fifosize	= 16;
-	spin_lock_init(&serial_port.lock);
 
 	/* serial port #1 */
 	serial_port.iobase	= sio_dev.sp1_base;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 1889a63ebc2..0d934bfbdd9 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2839,6 +2839,8 @@ int __init early_serial_setup(struct uart_port *port)
 	p->flags        = port->flags;
 	p->mapbase      = port->mapbase;
 	p->private_data = port->private_data;
+	p->type		= port->type;
+	p->line		= port->line;
 
 	set_io_from_upio(p);
 	if (port->serial_in)
-- 
GitLab


From 62568510b8e2679cbc331d7de10ea9ba81ae8b3d Mon Sep 17 00:00:00 2001
From: Bernd Schmidt <bernds_cb1@t-online.de>
Date: Tue, 13 Jan 2009 22:14:48 +0100
Subject: [PATCH 295/492] Fix timeouts in sys_pselect7

Since we (Analog Devices) updated our Blackfin kernel to 2.6.28, we've
seen occasional 5-second hangs from telnet.  telnetd calls select with a
NULL timeout, but with the new kernel, the system call occasionally
returns 0, which causes telnet to call sleep (5).  This did not happen
with earlier kernels.

The code in sys_pselect7 looks a bit strange, in particular the variable
"to" is initialized to NULL, then changed if a non-null timeout was
passed in, but not used further.  It needs to be passed to
core_sys_select instead of &end_time.

This bug was introduced by 8ff3e8e85fa6c312051134b3953e397feb639f51
("select: switch select() and poll() over to hrtimers").

Signed-off-by: Bernd Schmidt <bernd.schmidt@analog.com>
Reviewed-by: Ulrich Drepper <drepper@redhat.com>
Tested-by: Robin Getz <rgetz@blackfin.uclinux.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/select.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/select.c b/fs/select.c
index 08b91beed80..b0cf1f0896d 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -610,7 +610,7 @@ asmlinkage long sys_pselect7(int n, fd_set __user *inp, fd_set __user *outp,
 		sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
 	}
 
-	ret = core_sys_select(n, inp, outp, exp, &end_time);
+	ret = core_sys_select(n, inp, outp, exp, to);
 	ret = poll_select_copy_remaining(&end_time, tsp, 0, ret);
 
 	if (ret == -ERESTARTNOHAND) {
-- 
GitLab


From 5597b25c300eeaf43392f399990d3f3027a9b779 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 8 Jan 2009 18:11:56 -0600
Subject: [PATCH 296/492] powerpc/e500mc: Doorbells need to be taken
 w/exceptions disabled

We use Doorbell interrupts for IPIs and thus we need to make sure we aren't
interrupted in the process of processing the IPI.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Dave Liu <daveliu@freescale.com>
---
 arch/powerpc/kernel/head_fsl_booke.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 2f32720a44a..36ffb3504a4 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -707,7 +707,7 @@ interrupt_base:
 	EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
 
 #ifdef CONFIG_PPC_E500MC
-	EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_EE)
+	EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_STD)
 #endif
 
 	/* Debug Interrupt */
-- 
GitLab


From 6c9789de2a02755101f757789ffcb17312f3fa9b Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Sun, 11 Jan 2009 18:30:13 +0300
Subject: [PATCH 297/492] powerpc/83xx: Make serial ports work on MPC8315E-RDB
 w/ FSL U-Boots

FSL U-Boots use /soc8315@e0000000 node to search and fixup serial
nodes' clock-frequency properties. Though in upstream kernels we use
new naming convention -- for IMMR address space dts files specify
/immr@e0000000 nodes.

This makes FSL U-Boots fail to fixup the clock frequencies, and that
leads to serial ports misbehaviour. We can workaround the issue by
filling the clock frequency values manually.

p.s. For the same reason FSL U-Boots fail to fixup MAC addresses for
ethernet nodes, so users should either change the .dts file locally
or set MAC address via `ifconfig hw ether' command.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8315erdb.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 072c9b0f8c8..71784165b77 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -255,7 +255,7 @@
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
+			clock-frequency = <133333333>;
 			interrupts = <9 0x8>;
 			interrupt-parent = <&ipic>;
 		};
@@ -265,7 +265,7 @@
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
+			clock-frequency = <133333333>;
 			interrupts = <10 0x8>;
 			interrupt-parent = <&ipic>;
 		};
-- 
GitLab


From ea0105ea3881b409e362451690184af494bce6e3 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Sun, 11 Jan 2009 19:55:39 +0300
Subject: [PATCH 298/492] powerpc/83xx: Move mcu_mpc8349emitx driver out of
 drivers/i2c/chips/

This patch is used to help Jean Delvare to get rid of drivers/i2c/chips/
directory. The new location suggested by Kumar Gala: as the driver is
83xx specific it's placed into arch/powerpc/platforms/83xx/.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/platforms/83xx/Makefile                  |  1 +
 .../powerpc/platforms/83xx}/mcu_mpc8349emitx.c        |  0
 arch/powerpc/platforms/Kconfig                        | 11 +++++++++++
 drivers/i2c/chips/Kconfig                             | 11 -----------
 drivers/i2c/chips/Makefile                            |  1 -
 5 files changed, 12 insertions(+), 12 deletions(-)
 rename {drivers/i2c/chips => arch/powerpc/platforms/83xx}/mcu_mpc8349emitx.c (100%)

diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index ba5028e2989..051777c542c 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -3,6 +3,7 @@
 #
 obj-y				:= misc.o usb.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
+obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o
diff --git a/drivers/i2c/chips/mcu_mpc8349emitx.c b/arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
similarity index 100%
rename from drivers/i2c/chips/mcu_mpc8349emitx.c
rename to arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 47fe2bea986..200b9cb900e 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -323,4 +323,15 @@ config SIMPLE_GPIO
 	  chip-selects, Ethernet/USB PHY's power and various other small
 	  on-board peripherals.
 
+config MCU_MPC8349EMITX
+	tristate "MPC8349E-mITX MCU driver"
+	depends on I2C && PPC_83xx
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here to enable soft power-off functionality on the Freescale
+	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
+	  also register MCU GPIOs with the generic GPIO API, so you'll able
+	  to use MCU pins as GPIOs.
+
 endmenu
diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig
index 59c3d23f5bd..b9bef04b7be 100644
--- a/drivers/i2c/chips/Kconfig
+++ b/drivers/i2c/chips/Kconfig
@@ -139,15 +139,4 @@ config SENSORS_TSL2550
 	  This driver can also be built as a module.  If so, the module
 	  will be called tsl2550.
 
-config MCU_MPC8349EMITX
-	tristate "MPC8349E-mITX MCU driver"
-	depends on I2C && PPC_83xx
-	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Say Y here to enable soft power-off functionality on the Freescale
-	  boards with the MPC8349E-mITX-compatible MCU chips. This driver will
-	  also register MCU GPIOs with the generic GPIO API, so you'll able
-	  to use MCU pins as GPIOs.
-
 endmenu
diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile
index 83accaaf816..00fcb5193ac 100644
--- a/drivers/i2c/chips/Makefile
+++ b/drivers/i2c/chips/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_SENSORS_PCF8574)	+= pcf8574.o
 obj-$(CONFIG_PCF8575)		+= pcf8575.o
 obj-$(CONFIG_SENSORS_PCF8591)	+= pcf8591.o
 obj-$(CONFIG_SENSORS_TSL2550)	+= tsl2550.o
-obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
 
 ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
 EXTRA_CFLAGS += -DDEBUG
-- 
GitLab


From 33966dd0e2f68f26943cd9ee93ec6abbc6547a8e Mon Sep 17 00:00:00 2001
From: Willy Tarreau <w@1wt.eu>
Date: Tue, 13 Jan 2009 16:04:36 -0800
Subject: [PATCH 299/492] tcp: splice as many packets as possible at once

As spotted by Willy Tarreau, current splice() from tcp socket to pipe is not
optimal. It processes at most one segment per call.
This results in low performance and very high overhead due to syscall rate
when splicing from interfaces which do not support LRO.

Willy provided a patch inside tcp_splice_read(), but a better fix
is to let tcp_read_sock() process as many segments as possible, so
that tcp_rcv_space_adjust() and tcp_cleanup_rbuf() are called less
often.

With this change, splice() behaves like tcp_recvmsg(), being able
to consume many skbs in one system call. With typical 1460 bytes
of payload per frame, that means splice(SPLICE_F_NONBLOCK) can return
16*1460 = 23360 bytes.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index ce572f9dff0..48ada1b2d2c 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -522,8 +522,12 @@ static int tcp_splice_data_recv(read_descriptor_t *rd_desc, struct sk_buff *skb,
 				unsigned int offset, size_t len)
 {
 	struct tcp_splice_state *tss = rd_desc->arg.data;
+	int ret;
 
-	return skb_splice_bits(skb, offset, tss->pipe, tss->len, tss->flags);
+	ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags);
+	if (ret > 0)
+		rd_desc->count -= ret;
+	return ret;
 }
 
 static int __tcp_splice_read(struct sock *sk, struct tcp_splice_state *tss)
@@ -531,6 +535,7 @@ static int __tcp_splice_read(struct sock *sk, struct tcp_splice_state *tss)
 	/* Store TCP splice context information in read_descriptor_t. */
 	read_descriptor_t rd_desc = {
 		.arg.data = tss,
+		.count	  = tss->len,
 	};
 
 	return tcp_read_sock(sk, &rd_desc, tcp_splice_data_recv);
@@ -611,11 +616,13 @@ ssize_t tcp_splice_read(struct socket *sock, loff_t *ppos,
 		tss.len -= ret;
 		spliced += ret;
 
+		if (!timeo)
+			break;
 		release_sock(sk);
 		lock_sock(sk);
 
 		if (sk->sk_err || sk->sk_state == TCP_CLOSE ||
-		    (sk->sk_shutdown & RCV_SHUTDOWN) || !timeo ||
+		    (sk->sk_shutdown & RCV_SHUTDOWN) ||
 		    signal_pending(current))
 			break;
 	}
-- 
GitLab


From 7a6046ebe28d6a5d259097dcb44162e5a6eca88e Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 13 Jan 2009 17:38:24 -0800
Subject: [PATCH 300/492] sparc64: Fix UP build failure.

sparc_ksyms_64.c includes asm/spinlock.h directly, which is
a no-no.

Even better, none of these exports are even necessary.  All
of these functions are inlines.

Reported by Meelis Roos and Alexander Beregalov.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/sparc_ksyms_64.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/arch/sparc/kernel/sparc_ksyms_64.c b/arch/sparc/kernel/sparc_ksyms_64.c
index da8f804feb4..0f26066a08d 100644
--- a/arch/sparc/kernel/sparc_ksyms_64.c
+++ b/arch/sparc/kernel/sparc_ksyms_64.c
@@ -9,7 +9,6 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 
-#include <asm/spinlock.h>
 #include <asm/system.h>
 #include <asm/cpudata.h>
 #include <asm/uaccess.h>
@@ -23,16 +22,6 @@ struct poll {
 	short revents;
 };
 
-/* used by various drivers */
-#ifdef CONFIG_SMP
-/* Out of line rw-locking implementation. */
-EXPORT_SYMBOL(__read_lock);
-EXPORT_SYMBOL(__read_unlock);
-EXPORT_SYMBOL(__write_lock);
-EXPORT_SYMBOL(__write_unlock);
-EXPORT_SYMBOL(__write_trylock);
-#endif /* CONFIG_SMP */
-
 /* from helpers.S */
 EXPORT_SYMBOL(__flushw_user);
 EXPORT_SYMBOL_GPL(real_hard_smp_processor_id);
-- 
GitLab


From 7891cc818967e186be68caac32d84bfd0a3f0bd2 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 13 Jan 2009 22:17:51 -0800
Subject: [PATCH 301/492] ipv6: Fix fib6_dump_table walker leak

When a fib6 table dump is prematurely ended, we won't unlink
its walker from the list.  This causes all sorts of grief for
other users of the list later.

Reported-by: Chris Caputo <ccaputo@alt.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/ip6_fib.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 29c7c99e69f..52ee1dced2f 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -298,6 +298,10 @@ static void fib6_dump_end(struct netlink_callback *cb)
 	struct fib6_walker_t *w = (void*)cb->args[2];
 
 	if (w) {
+		if (cb->args[4]) {
+			cb->args[4] = 0;
+			fib6_walker_unlink(w);
+		}
 		cb->args[2] = 0;
 		kfree(w);
 	}
@@ -330,15 +334,12 @@ static int fib6_dump_table(struct fib6_table *table, struct sk_buff *skb,
 		read_lock_bh(&table->tb6_lock);
 		res = fib6_walk_continue(w);
 		read_unlock_bh(&table->tb6_lock);
-		if (res != 0) {
-			if (res < 0)
-				fib6_walker_unlink(w);
-			goto end;
+		if (res <= 0) {
+			fib6_walker_unlink(w);
+			cb->args[4] = 0;
 		}
-		fib6_walker_unlink(w);
-		cb->args[4] = 0;
 	}
-end:
+
 	return res;
 }
 
-- 
GitLab


From 2acc9dcb609427a20463e529ef552dd93b469847 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Fri, 9 Jan 2009 16:57:14 +0100
Subject: [PATCH 302/492] ALSA: hda - Fix silent headphone output on Panasonic
 CF-74

CF-74 does the headphone/speaker switching on hardware, thus the driver
shouldn't do any software-toggling of pins.  Otherwise it results in a
silent headphone output.

This patch simply resets the hp_detect flag to fix the problem.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 0e6fc56fa37..89ff916a0ed 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4467,6 +4467,12 @@ static int patch_stac9200(struct hda_codec *codec)
 		return err;
 	}
 
+	/* CF-74 has no headphone detection, and the driver should *NOT*
+	 * do detection and HP/speaker toggle because the hardware does it.
+	 */
+	if (spec->board_config == STAC_9200_PANASONIC)
+		spec->hp_detect = 0;
+
 	codec->patch_ops = stac92xx_patch_ops;
 
 	return 0;
-- 
GitLab


From c15c5060fc32d7de7cde76aa61e98bae1334d82e Mon Sep 17 00:00:00 2001
From: Matthew Ranostay <mranostay@embeddedalley.com>
Date: Tue, 13 Jan 2009 13:30:07 -0500
Subject: [PATCH 303/492] ALSA: hda: stac92hd8xxx amp mixers

Added amp nid for stac92hd8xxx families of codecs so the input amp
mixer is created.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 89ff916a0ed..77fcc312a1f 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -336,6 +336,10 @@ static unsigned int stac92hd83xxx_pwr_mapping[4] = {
 	0x03, 0x0c, 0x10, 0x40,
 };
 
+static unsigned int stac92hd83xxx_amp_nids[1] = {
+	0xc,
+};
+
 static hda_nid_t stac92hd71bxx_pwr_nids[3] = {
 	0x0a, 0x0d, 0x0f
 };
@@ -4747,6 +4751,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec)
 	spec->dmux_nids = stac92hd83xxx_dmux_nids;
 	spec->adc_nids = stac92hd83xxx_adc_nids;
 	spec->pwr_nids = stac92hd83xxx_pwr_nids;
+	spec->amp_nids = stac92hd83xxx_amp_nids;
 	spec->pwr_mapping = stac92hd83xxx_pwr_mapping;
 	spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids);
 	spec->multiout.dac_nids = spec->dac_nids;
@@ -4764,6 +4769,7 @@ static int patch_stac92hd83xxx(struct hda_codec *codec)
 	spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids);
 	spec->num_dmuxes = ARRAY_SIZE(stac92hd83xxx_dmux_nids);
 	spec->num_adcs = ARRAY_SIZE(stac92hd83xxx_adc_nids);
+	spec->num_amps = ARRAY_SIZE(stac92hd83xxx_amp_nids);
 	spec->num_dmics = STAC92HD83XXX_NUM_DMICS;
 	spec->dinput_mux = &stac92hd83xxx_dmux;
 	spec->pin_nids = stac92hd83xxx_pin_nids;
-- 
GitLab


From 8317e0b0c2234f5f1f5d54804e4093d11bc0dffa Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 14 Jan 2009 07:56:51 +0100
Subject: [PATCH 304/492] ALSA: hda - Don't reset HP pinctl in patch_sigmatel.c

Resetting HP pinctl at the unplugged state may cause a sort of regression
on some devices because of their wrong pin configuration.

A simple workaround is to disable the pin reset.  This is ugly and may be
not good from the power-saving POV (if any), but damn simple.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org
---
 sound/pci/hda/patch_sigmatel.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 77fcc312a1f..103ac6d743e 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4225,8 +4225,19 @@ static void stac92xx_hp_detect(struct hda_codec *codec)
 			continue;
 		if (presence)
 			stac92xx_set_pinctl(codec, cfg->hp_pins[i], val);
+#if 0 /* FIXME */
+/* Resetting the pinctl like below may lead to (a sort of) regressions
+ * on some devices since they use the HP pin actually for line/speaker
+ * outs although the default pin config shows a different pin (that is
+ * wrong and useless).
+ *
+ * So, it's basically a problem of default pin configs, likely a BIOS issue.
+ * But, disabling the code below just works around it, and I'm too tired of
+ * bug reports with such devices... 
+ */
 		else
 			stac92xx_reset_pinctl(codec, cfg->hp_pins[i], val);
+#endif /* FIXME */
 	}
 } 
 
-- 
GitLab


From 3e420e78ece6f9d2accc1568e80dfd0501e13df1 Mon Sep 17 00:00:00 2001
From: Luke Yelavich <themuso@ubuntu.com>
Date: Tue, 16 Dec 2008 12:37:47 +1100
Subject: [PATCH 305/492] ALSA: hda - Add automatic model setting for Samsung
 Q45

Have the Samsung Q45 (144d:c510) select ALC262_HIPPO by default

Reference: Ubuntu bug 200210
	http://launchpad.net/bugs/200210

Signed-off-by: Luke Yelavich <themuso@ubuntu.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ea4c88fe05c..82dd0843197 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -10573,6 +10573,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x10cf, 0x142d, "Fujitsu Lifebook E8410", ALC262_FUJITSU),
 	SND_PCI_QUIRK(0x144d, 0xc032, "Samsung Q1 Ultra", ALC262_ULTRA),
 	SND_PCI_QUIRK(0x144d, 0xc039, "Samsung Q1U EL", ALC262_ULTRA),
+	SND_PCI_QUIRK(0x144d, 0xc510, "Samsung Q45", ALC262_HIPPO),
 	SND_PCI_QUIRK(0x17aa, 0x384e, "Lenovo 3000 y410", ALC262_LENOVO_3000),
 	SND_PCI_QUIRK(0x17ff, 0x0560, "Benq ED8", ALC262_BENQ_ED8),
 	SND_PCI_QUIRK(0x17ff, 0x058d, "Benq T31-16", ALC262_BENQ_T31),
-- 
GitLab


From 9248f2693921b143b54f380b60c945b28a7a5358 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 14 Jan 2009 09:40:25 +0100
Subject: [PATCH 306/492] ALSA: hda - Fix stac92hd83xxx_amp_nids[]
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix the bug introduced in commit c15c5060fc32d7de7cde76aa61e98bae1334d82e:
  sound/pci/hda/patch_sigmatel.c: In function ‘patch_stac92hd83xxx’:
  sound/pci/hda/patch_sigmatel.c:4765: warning: assignment from incompatible pointer type

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 103ac6d743e..25230f4c888 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -336,7 +336,7 @@ static unsigned int stac92hd83xxx_pwr_mapping[4] = {
 	0x03, 0x0c, 0x10, 0x40,
 };
 
-static unsigned int stac92hd83xxx_amp_nids[1] = {
+static hda_nid_t stac92hd83xxx_amp_nids[1] = {
 	0xc,
 };
 
-- 
GitLab


From 5c6c9e6feccf771d060708fbbba9e0f67f8e0e67 Mon Sep 17 00:00:00 2001
From: "Signed-off-by: Peter Stokes" <linux@dadeos.co.uk>
Date: Wed, 14 Jan 2009 09:47:57 +0100
Subject: [PATCH 307/492] ALSA: USB quirk for Logitech Quickcam Pro 9000 name

The Logitech QuickCam Pro 9000 does not appear to any product identification
strings in its USB device descriptor. Therefore it receives a device name of
"USB Device 0x46d:0x990". Th e attached patch below adds a USB quirk to
provide a more friendly name.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/usb/usbquirks.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h
index 92115755d98..5d8ef09b9dc 100644
--- a/sound/usb/usbquirks.h
+++ b/sound/usb/usbquirks.h
@@ -128,6 +128,14 @@
 	.bInterfaceClass = USB_CLASS_AUDIO,
 	.bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL
 },
+{
+	USB_DEVICE(0x046d, 0x0990),
+	.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+		.vendor_name = "Logitech, Inc.",
+		.product_name = "QuickCam Pro 9000",
+		.ifnum = QUIRK_NO_INTERFACE
+	}
+},
 
 /*
  * Yamaha devices
-- 
GitLab


From 4c696ba7982501d43dea11dbbaabd2aa8a19cc42 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:13:53 +0100
Subject: [PATCH 308/492] [CVE-2009-0029] Move compat system call declarations
 to compat header file

Move declarations to correct header file.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 include/linux/compat.h   | 13 +++++++++++++
 include/linux/syscalls.h | 12 ------------
 2 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/include/linux/compat.h b/include/linux/compat.h
index e88f3ecf38b..3fd2194ff57 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -280,5 +280,18 @@ asmlinkage long compat_sys_timerfd_settime(int ufd, int flags,
 asmlinkage long compat_sys_timerfd_gettime(int ufd,
 				   struct compat_itimerspec __user *otmr);
 
+asmlinkage long compat_sys_move_pages(pid_t pid, unsigned long nr_page,
+				      __u32 __user *pages,
+				      const int __user *nodes,
+				      int __user *status,
+				      int flags);
+asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename,
+				     struct compat_timeval __user *t);
+asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user * filename,
+				      struct compat_stat __user *statbuf,
+				      int flag);
+asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
+				  int flags, int mode);
+
 #endif /* CONFIG_COMPAT */
 #endif /* _LINUX_COMPAT_H */
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 18d0a243a7b..a7593f670ca 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -530,11 +530,6 @@ asmlinkage long sys_move_pages(pid_t pid, unsigned long nr_pages,
 				const int __user *nodes,
 				int __user *status,
 				int flags);
-asmlinkage long compat_sys_move_pages(pid_t pid, unsigned long nr_page,
-				__u32 __user *pages,
-				const int __user *nodes,
-				int __user *status,
-				int flags);
 asmlinkage long sys_mbind(unsigned long start, unsigned long len,
 				unsigned long mode,
 				unsigned long __user *nmask,
@@ -583,13 +578,6 @@ asmlinkage long sys_readlinkat(int dfd, const char __user *path, char __user *bu
 			       int bufsiz);
 asmlinkage long sys_utimensat(int dfd, char __user *filename,
 				struct timespec __user *utimes, int flags);
-asmlinkage long compat_sys_futimesat(unsigned int dfd, char __user *filename,
-				     struct compat_timeval __user *t);
-asmlinkage long compat_sys_newfstatat(unsigned int dfd, char __user * filename,
-				      struct compat_stat __user *statbuf,
-				      int flag);
-asmlinkage long compat_sys_openat(unsigned int dfd, const char __user *filename,
-				   int flags, int mode);
 asmlinkage long sys_unshare(unsigned long unshare_flags);
 
 asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
-- 
GitLab


From 2ed7c03ec17779afb4fcfa3b8c61df61bd4879ba Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:13:54 +0100
Subject: [PATCH 309/492] [CVE-2009-0029] Convert all system calls to return a
 long

Convert all system calls to return a long. This should be a NOP since all
converted types should have the same size anyway.
With the exception of sys_exit_group which returned void. But that doesn't
matter since the system call doesn't return.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/read_write.c          | 18 ++++-----
 fs/xattr.c               | 12 +++---
 include/linux/syscalls.h | 79 ++++++++++++++++++++--------------------
 ipc/mqueue.c             |  2 +-
 kernel/exit.c            |  4 +-
 kernel/signal.c          |  2 +-
 kernel/timer.c           |  2 +-
 mm/filemap.c             |  2 +-
 mm/mmap.c                |  2 +-
 mm/mremap.c              |  2 +-
 mm/nommu.c               |  2 +-
 11 files changed, 64 insertions(+), 63 deletions(-)

diff --git a/fs/read_write.c b/fs/read_write.c
index 5cc6924eb15..940367f51f2 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -147,7 +147,7 @@ loff_t vfs_llseek(struct file *file, loff_t offset, int origin)
 }
 EXPORT_SYMBOL(vfs_llseek);
 
-asmlinkage off_t sys_lseek(unsigned int fd, off_t offset, unsigned int origin)
+asmlinkage long sys_lseek(unsigned int fd, off_t offset, unsigned int origin)
 {
 	off_t retval;
 	struct file * file;
@@ -369,7 +369,7 @@ static inline void file_pos_write(struct file *file, loff_t pos)
 	file->f_pos = pos;
 }
 
-asmlinkage ssize_t sys_read(unsigned int fd, char __user * buf, size_t count)
+asmlinkage long sys_read(unsigned int fd, char __user * buf, size_t count)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -386,7 +386,7 @@ asmlinkage ssize_t sys_read(unsigned int fd, char __user * buf, size_t count)
 	return ret;
 }
 
-asmlinkage ssize_t sys_write(unsigned int fd, const char __user * buf, size_t count)
+asmlinkage long sys_write(unsigned int fd, const char __user * buf, size_t count)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -403,7 +403,7 @@ asmlinkage ssize_t sys_write(unsigned int fd, const char __user * buf, size_t co
 	return ret;
 }
 
-asmlinkage ssize_t sys_pread64(unsigned int fd, char __user *buf,
+asmlinkage long sys_pread64(unsigned int fd, char __user *buf,
 			     size_t count, loff_t pos)
 {
 	struct file *file;
@@ -424,7 +424,7 @@ asmlinkage ssize_t sys_pread64(unsigned int fd, char __user *buf,
 	return ret;
 }
 
-asmlinkage ssize_t sys_pwrite64(unsigned int fd, const char __user *buf,
+asmlinkage long sys_pwrite64(unsigned int fd, const char __user *buf,
 			      size_t count, loff_t pos)
 {
 	struct file *file;
@@ -672,7 +672,7 @@ ssize_t vfs_writev(struct file *file, const struct iovec __user *vec,
 
 EXPORT_SYMBOL(vfs_writev);
 
-asmlinkage ssize_t
+asmlinkage long
 sys_readv(unsigned long fd, const struct iovec __user *vec, unsigned long vlen)
 {
 	struct file *file;
@@ -693,7 +693,7 @@ sys_readv(unsigned long fd, const struct iovec __user *vec, unsigned long vlen)
 	return ret;
 }
 
-asmlinkage ssize_t
+asmlinkage long
 sys_writev(unsigned long fd, const struct iovec __user *vec, unsigned long vlen)
 {
 	struct file *file;
@@ -812,7 +812,7 @@ out:
 	return retval;
 }
 
-asmlinkage ssize_t sys_sendfile(int out_fd, int in_fd, off_t __user *offset, size_t count)
+asmlinkage long sys_sendfile(int out_fd, int in_fd, off_t __user *offset, size_t count)
 {
 	loff_t pos;
 	off_t off;
@@ -831,7 +831,7 @@ asmlinkage ssize_t sys_sendfile(int out_fd, int in_fd, off_t __user *offset, siz
 	return do_sendfile(out_fd, in_fd, NULL, count, 0);
 }
 
-asmlinkage ssize_t sys_sendfile64(int out_fd, int in_fd, loff_t __user *offset, size_t count)
+asmlinkage long sys_sendfile64(int out_fd, int in_fd, loff_t __user *offset, size_t count)
 {
 	loff_t pos;
 	ssize_t ret;
diff --git a/fs/xattr.c b/fs/xattr.c
index 237804cd6b5..d049ae27aae 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -349,7 +349,7 @@ getxattr(struct dentry *d, const char __user *name, void __user *value,
 	return error;
 }
 
-asmlinkage ssize_t
+asmlinkage long
 sys_getxattr(const char __user *pathname, const char __user *name,
 	     void __user *value, size_t size)
 {
@@ -364,7 +364,7 @@ sys_getxattr(const char __user *pathname, const char __user *name,
 	return error;
 }
 
-asmlinkage ssize_t
+asmlinkage long
 sys_lgetxattr(const char __user *pathname, const char __user *name, void __user *value,
 	      size_t size)
 {
@@ -379,7 +379,7 @@ sys_lgetxattr(const char __user *pathname, const char __user *name, void __user
 	return error;
 }
 
-asmlinkage ssize_t
+asmlinkage long
 sys_fgetxattr(int fd, const char __user *name, void __user *value, size_t size)
 {
 	struct file *f;
@@ -424,7 +424,7 @@ listxattr(struct dentry *d, char __user *list, size_t size)
 	return error;
 }
 
-asmlinkage ssize_t
+asmlinkage long
 sys_listxattr(const char __user *pathname, char __user *list, size_t size)
 {
 	struct path path;
@@ -438,7 +438,7 @@ sys_listxattr(const char __user *pathname, char __user *list, size_t size)
 	return error;
 }
 
-asmlinkage ssize_t
+asmlinkage long
 sys_llistxattr(const char __user *pathname, char __user *list, size_t size)
 {
 	struct path path;
@@ -452,7 +452,7 @@ sys_llistxattr(const char __user *pathname, char __user *list, size_t size)
 	return error;
 }
 
-asmlinkage ssize_t
+asmlinkage long
 sys_flistxattr(int fd, char __user *list, size_t size)
 {
 	struct file *f;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index a7593f670ca..22290eeaf55 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -77,7 +77,7 @@ asmlinkage long sys_times(struct tms __user *tbuf);
 
 asmlinkage long sys_gettid(void);
 asmlinkage long sys_nanosleep(struct timespec __user *rqtp, struct timespec __user *rmtp);
-asmlinkage unsigned long sys_alarm(unsigned int seconds);
+asmlinkage long sys_alarm(unsigned int seconds);
 asmlinkage long sys_getpid(void);
 asmlinkage long sys_getppid(void);
 asmlinkage long sys_getuid(void);
@@ -166,7 +166,7 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
 				unsigned long flags);
 
 asmlinkage long sys_exit(int error_code);
-asmlinkage void sys_exit_group(int error_code);
+asmlinkage long sys_exit_group(int error_code);
 asmlinkage long sys_wait4(pid_t pid, int __user *stat_addr,
 				int options, struct rusage __user *ru);
 asmlinkage long sys_waitid(int which, pid_t pid,
@@ -196,7 +196,7 @@ asmlinkage long sys_tkill(int pid, int sig);
 asmlinkage long sys_rt_sigqueueinfo(int pid, int sig, siginfo_t __user *uinfo);
 asmlinkage long sys_sgetmask(void);
 asmlinkage long sys_ssetmask(int newmask);
-asmlinkage unsigned long sys_signal(int sig, __sighandler_t handler);
+asmlinkage long sys_signal(int sig, __sighandler_t handler);
 asmlinkage long sys_pause(void);
 
 asmlinkage long sys_sync(void);
@@ -246,29 +246,29 @@ asmlinkage long sys_lsetxattr(const char __user *path, const char __user *name,
 			      const void __user *value, size_t size, int flags);
 asmlinkage long sys_fsetxattr(int fd, const char __user *name,
 			      const void __user *value, size_t size, int flags);
-asmlinkage ssize_t sys_getxattr(const char __user *path, const char __user *name,
-				void __user *value, size_t size);
-asmlinkage ssize_t sys_lgetxattr(const char __user *path, const char __user *name,
-				void __user *value, size_t size);
-asmlinkage ssize_t sys_fgetxattr(int fd, const char __user *name,
-				void __user *value, size_t size);
-asmlinkage ssize_t sys_listxattr(const char __user *path, char __user *list,
-				size_t size);
-asmlinkage ssize_t sys_llistxattr(const char __user *path, char __user *list,
-				size_t size);
-asmlinkage ssize_t sys_flistxattr(int fd, char __user *list, size_t size);
+asmlinkage long sys_getxattr(const char __user *path, const char __user *name,
+			     void __user *value, size_t size);
+asmlinkage long sys_lgetxattr(const char __user *path, const char __user *name,
+			      void __user *value, size_t size);
+asmlinkage long sys_fgetxattr(int fd, const char __user *name,
+			      void __user *value, size_t size);
+asmlinkage long sys_listxattr(const char __user *path, char __user *list,
+			      size_t size);
+asmlinkage long sys_llistxattr(const char __user *path, char __user *list,
+			       size_t size);
+asmlinkage long sys_flistxattr(int fd, char __user *list, size_t size);
 asmlinkage long sys_removexattr(const char __user *path,
 				const char __user *name);
 asmlinkage long sys_lremovexattr(const char __user *path,
 				 const char __user *name);
 asmlinkage long sys_fremovexattr(int fd, const char __user *name);
 
-asmlinkage unsigned long sys_brk(unsigned long brk);
+asmlinkage long sys_brk(unsigned long brk);
 asmlinkage long sys_mprotect(unsigned long start, size_t len,
 				unsigned long prot);
-asmlinkage unsigned long sys_mremap(unsigned long addr,
-				unsigned long old_len, unsigned long new_len,
-				unsigned long flags, unsigned long new_addr);
+asmlinkage long sys_mremap(unsigned long addr,
+			   unsigned long old_len, unsigned long new_len,
+			   unsigned long flags, unsigned long new_addr);
 asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
 			unsigned long prot, unsigned long pgoff,
 			unsigned long flags);
@@ -321,10 +321,10 @@ asmlinkage long sys_io_submit(aio_context_t, long,
 				struct iocb __user * __user *);
 asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb,
 			      struct io_event __user *result);
-asmlinkage ssize_t sys_sendfile(int out_fd, int in_fd,
-				off_t __user *offset, size_t count);
-asmlinkage ssize_t sys_sendfile64(int out_fd, int in_fd,
-				loff_t __user *offset, size_t count);
+asmlinkage long sys_sendfile(int out_fd, int in_fd,
+			     off_t __user *offset, size_t count);
+asmlinkage long sys_sendfile64(int out_fd, int in_fd,
+			       loff_t __user *offset, size_t count);
 asmlinkage long sys_readlink(const char __user *path,
 				char __user *buf, int bufsiz);
 asmlinkage long sys_creat(const char __user *pathname, int mode);
@@ -368,26 +368,25 @@ asmlinkage long sys_utime(char __user *filename,
 				struct utimbuf __user *times);
 asmlinkage long sys_utimes(char __user *filename,
 				struct timeval __user *utimes);
-asmlinkage off_t sys_lseek(unsigned int fd, off_t offset,
-				unsigned int origin);
+asmlinkage long sys_lseek(unsigned int fd, off_t offset,
+			  unsigned int origin);
 asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high,
 			unsigned long offset_low, loff_t __user *result,
 			unsigned int origin);
-asmlinkage ssize_t sys_read(unsigned int fd, char __user *buf,
-				size_t count);
-asmlinkage ssize_t sys_readahead(int fd, loff_t offset, size_t count);
-asmlinkage ssize_t sys_readv(unsigned long fd,
-				const struct iovec __user *vec,
-				unsigned long vlen);
-asmlinkage ssize_t sys_write(unsigned int fd, const char __user *buf,
-				size_t count);
-asmlinkage ssize_t sys_writev(unsigned long fd,
-				const struct iovec __user *vec,
-				unsigned long vlen);
-asmlinkage ssize_t sys_pread64(unsigned int fd, char __user *buf,
-				size_t count, loff_t pos);
-asmlinkage ssize_t sys_pwrite64(unsigned int fd, const char __user *buf,
-				size_t count, loff_t pos);
+asmlinkage long sys_read(unsigned int fd, char __user *buf, size_t count);
+asmlinkage long sys_readahead(int fd, loff_t offset, size_t count);
+asmlinkage long sys_readv(unsigned long fd,
+			  const struct iovec __user *vec,
+			  unsigned long vlen);
+asmlinkage long sys_write(unsigned int fd, const char __user *buf,
+			  size_t count);
+asmlinkage long sys_writev(unsigned long fd,
+			   const struct iovec __user *vec,
+			   unsigned long vlen);
+asmlinkage long sys_pread64(unsigned int fd, char __user *buf,
+			    size_t count, loff_t pos);
+asmlinkage long sys_pwrite64(unsigned int fd, const char __user *buf,
+			     size_t count, loff_t pos);
 asmlinkage long sys_getcwd(char __user *buf, unsigned long size);
 asmlinkage long sys_mkdir(const char __user *pathname, int mode);
 asmlinkage long sys_chdir(const char __user *filename);
@@ -476,7 +475,7 @@ asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf);
 asmlinkage long sys_mq_open(const char __user *name, int oflag, mode_t mode, struct mq_attr __user *attr);
 asmlinkage long sys_mq_unlink(const char __user *name);
 asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *msg_ptr, size_t msg_len, unsigned int msg_prio, const struct timespec __user *abs_timeout);
-asmlinkage ssize_t sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout);
+asmlinkage long sys_mq_timedreceive(mqd_t mqdes, char __user *msg_ptr, size_t msg_len, unsigned int __user *msg_prio, const struct timespec __user *abs_timeout);
 asmlinkage long sys_mq_notify(mqd_t mqdes, const struct sigevent __user *notification);
 asmlinkage long sys_mq_getsetattr(mqd_t mqdes, const struct mq_attr __user *mqstat, struct mq_attr __user *omqstat);
 
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 23fdb8492b8..6df028b7054 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -907,7 +907,7 @@ out:
 	return ret;
 }
 
-asmlinkage ssize_t sys_mq_timedreceive(mqd_t mqdes, char __user *u_msg_ptr,
+asmlinkage long sys_mq_timedreceive(mqd_t mqdes, char __user *u_msg_ptr,
 	size_t msg_len, unsigned int __user *u_msg_prio,
 	const struct timespec __user *u_abs_timeout)
 {
diff --git a/kernel/exit.c b/kernel/exit.c
index c7740fa3252..fac9b040af2 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1182,9 +1182,11 @@ do_group_exit(int exit_code)
  * wait4()-ing process will get the correct exit code - even if this
  * thread is not the thread group leader.
  */
-asmlinkage void sys_exit_group(int error_code)
+asmlinkage long sys_exit_group(int error_code)
 {
 	do_group_exit((error_code & 0xff) << 8);
+	/* NOTREACHED */
+	return 0;
 }
 
 static struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
diff --git a/kernel/signal.c b/kernel/signal.c
index 3152ac3b62e..856a5479d49 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2559,7 +2559,7 @@ sys_ssetmask(int newmask)
 /*
  * For backwards compatibility.  Functionality superseded by sigaction.
  */
-asmlinkage unsigned long
+asmlinkage long
 sys_signal(int sig, __sighandler_t handler)
 {
 	struct k_sigaction new_sa, old_sa;
diff --git a/kernel/timer.c b/kernel/timer.c
index dee3f641a7a..7b8697d7f04 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1129,7 +1129,7 @@ void do_timer(unsigned long ticks)
  * For backwards compatibility?  This can be done in libc so Alpha
  * and all newer ports shouldn't need it.
  */
-asmlinkage unsigned long sys_alarm(unsigned int seconds)
+asmlinkage long sys_alarm(unsigned int seconds)
 {
 	return alarm_setitimer(seconds);
 }
diff --git a/mm/filemap.c b/mm/filemap.c
index ceba0bd0366..538b75ed623 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1374,7 +1374,7 @@ do_readahead(struct address_space *mapping, struct file *filp,
 	return 0;
 }
 
-asmlinkage ssize_t sys_readahead(int fd, loff_t offset, size_t count)
+asmlinkage long sys_readahead(int fd, loff_t offset, size_t count)
 {
 	ssize_t ret;
 	struct file *file;
diff --git a/mm/mmap.c b/mm/mmap.c
index 749623196cb..a970d890cb2 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -245,7 +245,7 @@ static struct vm_area_struct *remove_vma(struct vm_area_struct *vma)
 	return next;
 }
 
-asmlinkage unsigned long sys_brk(unsigned long brk)
+asmlinkage long sys_brk(unsigned long brk)
 {
 	unsigned long rlim, retval;
 	unsigned long newbrk, oldbrk;
diff --git a/mm/mremap.c b/mm/mremap.c
index 646de959aa5..5572e0825d8 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -420,7 +420,7 @@ out_nc:
 	return ret;
 }
 
-asmlinkage unsigned long sys_mremap(unsigned long addr,
+asmlinkage long sys_mremap(unsigned long addr,
 	unsigned long old_len, unsigned long new_len,
 	unsigned long flags, unsigned long new_addr)
 {
diff --git a/mm/nommu.c b/mm/nommu.c
index 60ed8375c98..ee3e7892773 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -416,7 +416,7 @@ EXPORT_SYMBOL(vm_insert_page);
  *  to a regular file.  in this case, the unmapping will need
  *  to invoke file system routines that need the global lock.
  */
-asmlinkage unsigned long sys_brk(unsigned long brk)
+asmlinkage long sys_brk(unsigned long brk)
 {
 	struct mm_struct *mm = current->mm;
 
-- 
GitLab


From e55380edf68796d75bf41391a781c68ee678587d Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:13:55 +0100
Subject: [PATCH 310/492] [CVE-2009-0029] Rename old_readdir to sys_old_readdir

This way it matches the generic system call name convention.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/arm/kernel/calls.S              | 2 +-
 arch/cris/arch-v10/kernel/entry.S    | 2 +-
 arch/cris/arch-v32/kernel/entry.S    | 2 +-
 arch/h8300/kernel/syscalls.S         | 2 +-
 arch/m68k/kernel/entry.S             | 2 +-
 arch/m68knommu/kernel/syscalltable.S | 2 +-
 arch/mips/kernel/scall32-o32.S       | 2 +-
 arch/mn10300/kernel/entry.S          | 2 +-
 arch/powerpc/include/asm/systbl.h    | 2 +-
 arch/sh/kernel/syscalls_32.S         | 2 +-
 arch/sh/kernel/syscalls_64.S         | 2 +-
 arch/sparc/kernel/systbls_32.S       | 2 +-
 arch/x86/kernel/syscall_table_32.S   | 2 +-
 fs/readdir.c                         | 2 +-
 include/linux/syscalls.h             | 2 ++
 15 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index 09a061cb783..9ca8d13f05f 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -98,7 +98,7 @@
 		CALL(sys_uselib)
 		CALL(sys_swapon)
 		CALL(sys_reboot)
-		CALL(OBSOLETE(old_readdir))	/* used by libc4 */
+		CALL(OBSOLETE(sys_old_readdir))	/* used by libc4 */
 /* 90 */	CALL(OBSOLETE(old_mmap))	/* used by libc4 */
 		CALL(sys_munmap)
 		CALL(sys_truncate)
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index ed171d389e6..72f5cd319b9 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -691,7 +691,7 @@ sys_call_table:
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 7f6f93e6b70..5e674c8f7c5 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -614,7 +614,7 @@ sys_call_table:
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S
index 54e21c3f205..4eb67faac63 100644
--- a/arch/h8300/kernel/syscalls.S
+++ b/arch/h8300/kernel/syscalls.S
@@ -103,7 +103,7 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_uselib)
 	.long SYMBOL_NAME(sys_swapon)
 	.long SYMBOL_NAME(sys_reboot)
-	.long SYMBOL_NAME(old_readdir)
+	.long SYMBOL_NAME(sys_old_readdir)
 	.long SYMBOL_NAME(old_mmap)		/* 90 */
 	.long SYMBOL_NAME(sys_munmap)
 	.long SYMBOL_NAME(sys_truncate)
diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S
index 5b780826647..5c332f2b9b8 100644
--- a/arch/m68k/kernel/entry.S
+++ b/arch/m68k/kernel/entry.S
@@ -513,7 +513,7 @@ sys_call_table:
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S
index 812f8d8b7a8..5c3e3f62194 100644
--- a/arch/m68knommu/kernel/syscalltable.S
+++ b/arch/m68knommu/kernel/syscalltable.S
@@ -107,7 +107,7 @@ ENTRY(sys_call_table)
 	.long sys_uselib
 	.long sys_ni_syscall	/* sys_swapon */
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index d0916a55cd7..51d1ba415b9 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -398,7 +398,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_uselib		1
 	sys	sys_swapon		2
 	sys	sys_reboot		3
-	sys	old_readdir		3
+	sys	sys_old_readdir		3
 	sys	old_mmap		6	/* 4090 */
 	sys	sys_munmap		2
 	sys	sys_truncate		2
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 62fba8aa9b6..ceeaaaa359e 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -478,7 +478,7 @@ ENTRY(sys_call_table)
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
index 803def23665..72353f6070a 100644
--- a/arch/powerpc/include/asm/systbl.h
+++ b/arch/powerpc/include/asm/systbl.h
@@ -92,7 +92,7 @@ COMPAT_SYS_SPU(readlink)
 SYSCALL(uselib)
 SYSCALL(swapon)
 SYSCALL(reboot)
-SYSX(sys_ni_syscall,compat_sys_old_readdir,old_readdir)
+SYSX(sys_ni_syscall,compat_sys_old_readdir,sys_old_readdir)
 SYSCALL_SPU(mmap)
 SYSCALL_SPU(munmap)
 SYSCALL_SPU(truncate)
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index 0af693e6576..a87ce076cfa 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -105,7 +105,7 @@ ENTRY(sys_call_table)
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index 0b436aa3cad..557cb91f5ca 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -109,7 +109,7 @@ sys_call_table:
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap			/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 7d080758644..8a434f51ba0 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -56,7 +56,7 @@ sys_call_table:
 /*185*/	.long sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname
 /*190*/	.long sys_init_module, sys_personality, sparc_remap_file_pages, sys_epoll_create, sys_epoll_ctl
 /*195*/	.long sys_epoll_wait, sys_ioprio_set, sys_getppid, sparc_sigaction, sys_sgetmask
-/*200*/	.long sys_ssetmask, sys_sigsuspend, sys_newlstat, sys_uselib, old_readdir
+/*200*/	.long sys_ssetmask, sys_sigsuspend, sys_newlstat, sys_uselib, sys_old_readdir
 /*205*/	.long sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64
 /*210*/	.long sys_fadvise64_64, sys_tgkill, sys_waitpid, sys_swapoff, sys_sysinfo
 /*215*/	.long sys_ipc, sys_sigreturn, sys_clone, sys_ioprio_get, sys_adjtimex
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index d44395ff34c..e2e86a08f31 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -88,7 +88,7 @@ ENTRY(sys_call_table)
 	.long sys_uselib
 	.long sys_swapon
 	.long sys_reboot
-	.long old_readdir
+	.long sys_old_readdir
 	.long old_mmap		/* 90 */
 	.long sys_munmap
 	.long sys_truncate
diff --git a/fs/readdir.c b/fs/readdir.c
index b318d9b5af2..8b4c2a0051a 100644
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -102,7 +102,7 @@ efault:
 	return -EFAULT;
 }
 
-asmlinkage long old_readdir(unsigned int fd, struct old_linux_dirent __user * dirent, unsigned int count)
+asmlinkage long sys_old_readdir(unsigned int fd, struct old_linux_dirent __user * dirent, unsigned int count)
 {
 	int error;
 	struct file * file;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 22290eeaf55..ca079c3d09e 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -54,6 +54,7 @@ struct compat_stat;
 struct compat_timeval;
 struct robust_list_head;
 struct getcpu_cache;
+struct old_linux_dirent;
 
 #include <linux/types.h>
 #include <linux/aio_abi.h>
@@ -608,6 +609,7 @@ asmlinkage long sys_timerfd_gettime(int ufd, struct itimerspec __user *otmr);
 asmlinkage long sys_eventfd(unsigned int count);
 asmlinkage long sys_eventfd2(unsigned int count, int flags);
 asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len);
+asmlinkage long sys_old_readdir(unsigned int, struct old_linux_dirent __user *, unsigned int);
 
 int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
 
-- 
GitLab


From 1134723e96f6e2abcf8bfd7a2d1c96fcc323ef35 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:13:56 +0100
Subject: [PATCH 311/492] [CVE-2009-0029] Remove __attribute__((weak)) from
 sys_pipe/sys_pipe2

Remove __attribute__((weak)) from common code sys_pipe implemantation.
IA64, ALPHA, SUPERH (32bit) and SPARC (32bit) have own implemantations
with the same name. Just rename them.
For sys_pipe2 there is no architecture specific implementation.

Cc: Richard Henderson <rth@twiddle.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/alpha/kernel/entry.S         | 8 ++++----
 arch/alpha/kernel/systbls.S       | 2 +-
 arch/ia64/ia32/ia32_entry.S       | 2 +-
 arch/ia64/include/asm/unistd.h    | 2 +-
 arch/ia64/kernel/entry.S          | 2 +-
 arch/ia64/kernel/sys_ia64.c       | 2 +-
 arch/s390/kernel/entry.h          | 1 -
 arch/sh/include/asm/syscalls_32.h | 6 +++---
 arch/sh/kernel/sys_sh32.c         | 2 +-
 arch/sh/kernel/syscalls_32.S      | 2 +-
 arch/sparc/kernel/entry.S         | 4 ++--
 arch/sparc/kernel/syscalls.S      | 2 +-
 arch/sparc/kernel/systbls_32.S    | 2 +-
 arch/sparc/kernel/systbls_64.S    | 4 ++--
 fs/pipe.c                         | 4 ++--
 15 files changed, 22 insertions(+), 23 deletions(-)

diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index f77345bc66a..aa2e50cf985 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -896,9 +896,9 @@ sys_getxpid:
 .end sys_getxpid
 
 	.align	4
-	.globl	sys_pipe
-	.ent	sys_pipe
-sys_pipe:
+	.globl	sys_alpha_pipe
+	.ent	sys_alpha_pipe
+sys_alpha_pipe:
 	lda	$sp, -16($sp)
 	stq	$26, 0($sp)
 	.prologue 0
@@ -916,7 +916,7 @@ sys_pipe:
 	stq	$1, 80+16($sp)
 1:	lda	$sp, 16($sp)
 	ret
-.end sys_pipe
+.end sys_alpha_pipe
 
 	.align	4
 	.globl	sys_execve
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index ba914af18c4..9d9e3a98bb9 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -52,7 +52,7 @@ sys_call_table:
 	.quad sys_setpgid
 	.quad alpha_ni_syscall			/* 40 */
 	.quad sys_dup
-	.quad sys_pipe
+	.quad sys_alpha_pipe
 	.quad osf_set_program_attributes
 	.quad alpha_ni_syscall
 	.quad sys_open				/* 45 */
diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index a8cf1995885..a46f8395e9a 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -220,7 +220,7 @@ ia32_syscall_table:
 	data8 sys_mkdir
 	data8 sys_rmdir		  /* 40 */
 	data8 sys_dup
-	data8 sys_pipe
+	data8 sys_ia64_pipe
 	data8 compat_sys_times
 	data8 sys_ni_syscall	  /* old prof syscall holder */
 	data8 sys32_brk		  /* 45 */
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index f791576355a..9015979ebe0 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -364,7 +364,7 @@ struct pt_regs;
 struct sigaction;
 long sys_execve(char __user *filename, char __user * __user *argv,
 			   char __user * __user *envp, struct pt_regs *regs);
-asmlinkage long sys_pipe(void);
+asmlinkage long sys_ia64_pipe(void);
 asmlinkage long sys_rt_sigaction(int sig,
 				 const struct sigaction __user *act,
 				 struct sigaction __user *oact,
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index d435f4a7a96..e5341e2c117 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1442,7 +1442,7 @@ sys_call_table:
 	data8 sys_mkdir				// 1055
 	data8 sys_rmdir
 	data8 sys_dup
-	data8 sys_pipe
+	data8 sys_ia64_pipe
 	data8 sys_times
 	data8 ia64_brk				// 1060
 	data8 sys_setgid
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index bcbb6d8792d..92ed83f3403 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -154,7 +154,7 @@ out:
  * and r9) as this is faster than doing a copy_to_user().
  */
 asmlinkage long
-sys_pipe (void)
+sys_ia64_pipe (void)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	int fd[2];
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index a65afc91e8a..5c9b5b37004 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -30,7 +30,6 @@ struct fadvise64_64_args;
 struct old_sigaction;
 struct sel_arg_struct;
 
-long sys_pipe(unsigned long __user *fildes);
 long sys_mmap2(struct mmap_arg_struct __user  *arg);
 long old_mmap(struct mmap_arg_struct __user *arg);
 long sys_ipc(uint call, int first, unsigned long second,
diff --git a/arch/sh/include/asm/syscalls_32.h b/arch/sh/include/asm/syscalls_32.h
index 104c5e68610..8b30200305c 100644
--- a/arch/sh/include/asm/syscalls_32.h
+++ b/arch/sh/include/asm/syscalls_32.h
@@ -36,9 +36,9 @@ asmlinkage int sys_sigreturn(unsigned long r4, unsigned long r5,
 asmlinkage int sys_rt_sigreturn(unsigned long r4, unsigned long r5,
 				unsigned long r6, unsigned long r7,
 				struct pt_regs __regs);
-asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
-			unsigned long r6, unsigned long r7,
-			struct pt_regs __regs);
+asmlinkage int sys_sh_pipe(unsigned long r4, unsigned long r5,
+			   unsigned long r6, unsigned long r7,
+			   struct pt_regs __regs);
 asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char __user *buf,
 				     size_t count, long dummy, loff_t pos);
 asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char __user *buf,
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
index dbba1e1833d..63ba12836ea 100644
--- a/arch/sh/kernel/sys_sh32.c
+++ b/arch/sh/kernel/sys_sh32.c
@@ -22,7 +22,7 @@
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way Unix traditionally does this, though.
  */
-asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
+asmlinkage int sys_sh_pipe(unsigned long r4, unsigned long r5,
 	unsigned long r6, unsigned long r7,
 	struct pt_regs __regs)
 {
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index a87ce076cfa..e67c1733e1b 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -58,7 +58,7 @@ ENTRY(sys_call_table)
 	.long sys_mkdir
 	.long sys_rmdir		/* 40 */
 	.long sys_dup
-	.long sys_pipe
+	.long sys_sh_pipe
 	.long sys_times
 	.long sys_ni_syscall	/* old prof syscall holder */
 	.long sys_brk		/* 45 */
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index faf9ccd9ef5..f41ecc5ac0b 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -1088,8 +1088,8 @@ sunos_execv:
 	 ld	[%sp + STACKFRAME_SZ + PT_I0], %o0
 
 	.align	4
-	.globl	sys_pipe
-sys_pipe:
+	.globl	sys_sparc_pipe
+sys_sparc_pipe:
 	mov	%o7, %l5
 	add	%sp, STACKFRAME_SZ, %o0		! pt_regs *regs arg
 	call	sparc_pipe
diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S
index 7a6786a7136..87f5a3b8a25 100644
--- a/arch/sparc/kernel/syscalls.S
+++ b/arch/sparc/kernel/syscalls.S
@@ -20,7 +20,7 @@ execve_merge:
 	 add	%sp, PTREGS_OFF, %o0
 
 	.align	32
-sys_pipe:
+sys_sparc_pipe:
 	ba,pt	%xcc, sparc_pipe
 	 add	%sp, PTREGS_OFF, %o0
 sys_nis_syscall:
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 8a434f51ba0..dccc95df0c7 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -24,7 +24,7 @@ sys_call_table:
 /*25*/	.long sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_pause
 /*30*/	.long sys_utime, sys_lchown, sys_fchown, sys_access, sys_nice
 /*35*/	.long sys_chown, sys_sync, sys_kill, sys_newstat, sys_sendfile
-/*40*/	.long sys_newlstat, sys_dup, sys_pipe, sys_times, sys_getuid
+/*40*/	.long sys_newlstat, sys_dup, sys_sparc_pipe, sys_times, sys_getuid
 /*45*/	.long sys_umount, sys_setgid16, sys_getgid16, sys_signal, sys_geteuid16
 /*50*/	.long sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, sys_ioctl
 /*55*/	.long sys_reboot, sys_mmap2, sys_symlink, sys_readlink, sys_execve
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 9fc78cf354b..e6007bb3704 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -26,7 +26,7 @@ sys_call_table32:
 /*25*/	.word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause
 /*30*/	.word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice
 	.word sys_chown, sys_sync, sys32_kill, compat_sys_newstat, sys32_sendfile
-/*40*/	.word compat_sys_newlstat, sys_dup, sys_pipe, compat_sys_times, sys_getuid
+/*40*/	.word compat_sys_newlstat, sys_dup, sys_sparc_pipe, compat_sys_times, sys_getuid
 	.word sys32_umount, sys_setgid16, sys_getgid16, sys32_signal, sys_geteuid16
 /*50*/	.word sys_getegid16, sys_acct, sys_nis_syscall, sys_getgid, compat_sys_ioctl
 	.word sys32_reboot, sys32_mmap2, sys_symlink, sys32_readlink, sys32_execve
@@ -100,7 +100,7 @@ sys_call_table:
 /*25*/	.word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall
 /*30*/	.word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice
 	.word sys_nis_syscall, sys_sync, sys_kill, sys_newstat, sys_sendfile64
-/*40*/	.word sys_newlstat, sys_dup, sys_pipe, sys_times, sys_nis_syscall
+/*40*/	.word sys_newlstat, sys_dup, sys_sparc_pipe, sys_times, sys_nis_syscall
 	.word sys_umount, sys_setgid, sys_getgid, sys_signal, sys_geteuid
 /*50*/	.word sys_getegid, sys_acct, sys_memory_ordering, sys_nis_syscall, sys_ioctl
 	.word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve
diff --git a/fs/pipe.c b/fs/pipe.c
index 891697112f6..0c64db86c91 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1043,7 +1043,7 @@ int do_pipe(int *fd)
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way Unix traditionally does this, though.
  */
-asmlinkage long __weak sys_pipe2(int __user *fildes, int flags)
+asmlinkage long sys_pipe2(int __user *fildes, int flags)
 {
 	int fd[2];
 	int error;
@@ -1059,7 +1059,7 @@ asmlinkage long __weak sys_pipe2(int __user *fildes, int flags)
 	return error;
 }
 
-asmlinkage long __weak sys_pipe(int __user *fildes)
+asmlinkage long sys_pipe(int __user *fildes)
 {
 	return sys_pipe2(fildes, 0);
 }
-- 
GitLab


From c9da9f2129d6a421c32e334a83770a9e67f7feac Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:13:57 +0100
Subject: [PATCH 312/492] [CVE-2009-0029] Make sys_pselect7 static

Not a single architecture has wired up sys_pselect7 plus it is the
only system call with seven parameters. Just make it static and
rename it to do_pselect which will do the work for sys_pselect6.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/compat.c | 6 +++---
 fs/select.c | 8 ++++----
 2 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/fs/compat.c b/fs/compat.c
index 30f2faa22f5..65a070e705a 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1709,7 +1709,7 @@ asmlinkage long compat_sys_select(int n, compat_ulong_t __user *inp,
 }
 
 #ifdef HAVE_SET_RESTORE_SIGMASK
-asmlinkage long compat_sys_pselect7(int n, compat_ulong_t __user *inp,
+static long do_compat_pselect(int n, compat_ulong_t __user *inp,
 	compat_ulong_t __user *outp, compat_ulong_t __user *exp,
 	struct compat_timespec __user *tsp, compat_sigset_t __user *sigmask,
 	compat_size_t sigsetsize)
@@ -1775,8 +1775,8 @@ asmlinkage long compat_sys_pselect6(int n, compat_ulong_t __user *inp,
 				(compat_size_t __user *)(sig+sizeof(up))))
 			return -EFAULT;
 	}
-	return compat_sys_pselect7(n, inp, outp, exp, tsp, compat_ptr(up),
-					sigsetsize);
+	return do_compat_pselect(n, inp, outp, exp, tsp, compat_ptr(up),
+				 sigsetsize);
 }
 
 asmlinkage long compat_sys_ppoll(struct pollfd __user *ufds,
diff --git a/fs/select.c b/fs/select.c
index b0cf1f0896d..d1651648be1 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -582,9 +582,9 @@ asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 }
 
 #ifdef HAVE_SET_RESTORE_SIGMASK
-asmlinkage long sys_pselect7(int n, fd_set __user *inp, fd_set __user *outp,
-		fd_set __user *exp, struct timespec __user *tsp,
-		const sigset_t __user *sigmask, size_t sigsetsize)
+static long do_pselect(int n, fd_set __user *inp, fd_set __user *outp,
+		       fd_set __user *exp, struct timespec __user *tsp,
+		       const sigset_t __user *sigmask, size_t sigsetsize)
 {
 	sigset_t ksigmask, sigsaved;
 	struct timespec ts, end_time, *to = NULL;
@@ -650,7 +650,7 @@ asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp,
 			return -EFAULT;
 	}
 
-	return sys_pselect7(n, inp, outp, exp, tsp, up, sigsetsize);
+	return do_pselect(n, inp, outp, exp, tsp, up, sigsetsize);
 }
 #endif /* HAVE_SET_RESTORE_SIGMASK */
 
-- 
GitLab


From f627a741d24f12955fa2d9f8831c3b12860635bd Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:13:58 +0100
Subject: [PATCH 313/492] [CVE-2009-0029] Make sys_syslog a conditional system
 call

Remove the -ENOSYS implementation for !CONFIG_PRINTK and use
the cond_syscall infrastructure instead.

Acked-by: Kyle McMartin <kyle@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 kernel/printk.c | 5 -----
 kernel/sys_ni.c | 1 +
 2 files changed, 1 insertion(+), 5 deletions(-)

diff --git a/kernel/printk.c b/kernel/printk.c
index 7015733793e..e48cf33783f 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -742,11 +742,6 @@ EXPORT_SYMBOL(vprintk);
 
 #else
 
-asmlinkage long sys_syslog(int type, char __user *buf, int len)
-{
-	return -ENOSYS;
-}
-
 static void call_console_drivers(unsigned start, unsigned end)
 {
 }
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index e14a2328170..27dad296738 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -131,6 +131,7 @@ cond_syscall(sys_io_destroy);
 cond_syscall(sys_io_submit);
 cond_syscall(sys_io_cancel);
 cond_syscall(sys_io_getevents);
+cond_syscall(sys_syslog);
 
 /* arch-specific weak syscall entries */
 cond_syscall(sys_pciconfig_read);
-- 
GitLab


From 1a94bc34768e463a93cb3751819709ab0ea80a01 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:13:59 +0100
Subject: [PATCH 314/492] [CVE-2009-0029] System call wrapper infrastructure

From: Martin Schwidefsky <schwidefsky@de.ibm.com>

By selecting HAVE_SYSCALL_WRAPPERS architectures can activate
system call wrappers in order to sign extend system call arguments.

All architectures where the ABI defines that the caller of a function
has to perform sign extension probably need this.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/Kconfig             |  3 ++
 include/linux/syscalls.h | 62 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 65 insertions(+)

diff --git a/arch/Kconfig b/arch/Kconfig
index 2e13aa26192..550dab22daa 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -62,6 +62,9 @@ config HAVE_EFFICIENT_UNALIGNED_ACCESS
 	  See Documentation/unaligned-memory-access.txt for more
 	  information on the topic of unaligned memory accesses.
 
+config HAVE_SYSCALL_WRAPPERS
+	bool
+
 config KRETPROBES
 	def_bool y
 	depends on KPROBES && HAVE_KRETPROBES
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index ca079c3d09e..0bb537d7ba2 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -66,6 +66,68 @@ struct old_linux_dirent;
 #include <linux/quota.h>
 #include <linux/key.h>
 
+#define __SC_DECL1(t1, a1)	t1 a1
+#define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__)
+#define __SC_DECL3(t3, a3, ...) t3 a3, __SC_DECL2(__VA_ARGS__)
+#define __SC_DECL4(t4, a4, ...) t4 a4, __SC_DECL3(__VA_ARGS__)
+#define __SC_DECL5(t5, a5, ...) t5 a5, __SC_DECL4(__VA_ARGS__)
+#define __SC_DECL6(t6, a6, ...) t6 a6, __SC_DECL5(__VA_ARGS__)
+
+#define __SC_LONG1(t1, a1) 	long a1
+#define __SC_LONG2(t2, a2, ...) long a2, __SC_LONG1(__VA_ARGS__)
+#define __SC_LONG3(t3, a3, ...) long a3, __SC_LONG2(__VA_ARGS__)
+#define __SC_LONG4(t4, a4, ...) long a4, __SC_LONG3(__VA_ARGS__)
+#define __SC_LONG5(t5, a5, ...) long a5, __SC_LONG4(__VA_ARGS__)
+#define __SC_LONG6(t6, a6, ...) long a6, __SC_LONG5(__VA_ARGS__)
+
+#define __SC_CAST1(t1, a1)	(t1) a1
+#define __SC_CAST2(t2, a2, ...) (t2) a2, __SC_CAST1(__VA_ARGS__)
+#define __SC_CAST3(t3, a3, ...) (t3) a3, __SC_CAST2(__VA_ARGS__)
+#define __SC_CAST4(t4, a4, ...) (t4) a4, __SC_CAST3(__VA_ARGS__)
+#define __SC_CAST5(t5, a5, ...) (t5) a5, __SC_CAST4(__VA_ARGS__)
+#define __SC_CAST6(t6, a6, ...) (t6) a6, __SC_CAST5(__VA_ARGS__)
+
+#define __SC_TEST(type)		BUILD_BUG_ON(sizeof(type) > sizeof(long))
+#define __SC_TEST1(t1, a1)	__SC_TEST(t1)
+#define __SC_TEST2(t2, a2, ...)	__SC_TEST(t2); __SC_TEST1(__VA_ARGS__)
+#define __SC_TEST3(t3, a3, ...)	__SC_TEST(t3); __SC_TEST2(__VA_ARGS__)
+#define __SC_TEST4(t4, a4, ...)	__SC_TEST(t4); __SC_TEST3(__VA_ARGS__)
+#define __SC_TEST5(t5, a5, ...)	__SC_TEST(t5); __SC_TEST4(__VA_ARGS__)
+#define __SC_TEST6(t6, a6, ...)	__SC_TEST(t6); __SC_TEST5(__VA_ARGS__)
+
+#define SYSCALL_DEFINE0(name)   asmlinkage long sys_##name(void)
+#define SYSCALL_DEFINE1(...)    SYSCALL_DEFINEx(1, __VA_ARGS__)
+#define SYSCALL_DEFINE2(...)    SYSCALL_DEFINEx(2, __VA_ARGS__)
+#define SYSCALL_DEFINE3(...)    SYSCALL_DEFINEx(3, __VA_ARGS__)
+#define SYSCALL_DEFINE4(...)    SYSCALL_DEFINEx(4, __VA_ARGS__)
+#define SYSCALL_DEFINE5(...)    SYSCALL_DEFINEx(5, __VA_ARGS__)
+#define SYSCALL_DEFINE6(...)    SYSCALL_DEFINEx(6, __VA_ARGS__)
+
+#define SYSCALL_ALIAS(alias, name)					\
+	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name)
+
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+
+#define SYSCALL_DEFINE(name) static inline long SYSC_##name
+#define SYSCALL_DEFINEx(x, name, ...)					\
+	asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__));		\
+	static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__));	\
+	asmlinkage long SyS_##name(__SC_LONG##x(__VA_ARGS__))		\
+	{								\
+		__SC_TEST##x(__VA_ARGS__);				\
+		return (long) SYSC_##name(__SC_CAST##x(__VA_ARGS__));	\
+	}								\
+	SYSCALL_ALIAS(sys_##name, SyS_##name);				\
+	static inline long SYSC_##name(__SC_DECL##x(__VA_ARGS__))
+
+#else /* CONFIG_HAVE_SYSCALL_WRAPPERS */
+
+#define SYSCALL_DEFINE(name) asmlinkage long sys_##name
+#define SYSCALL_DEFINEx(x, name, ...)					\
+	asmlinkage long sys_##name(__SC_DECL##x(__VA_ARGS__))
+
+#endif /* CONFIG_HAVE_SYSCALL_WRAPPERS */
+
 asmlinkage long sys_time(time_t __user *tloc);
 asmlinkage long sys_stime(time_t __user *tptr);
 asmlinkage long sys_gettimeofday(struct timeval __user *tv,
-- 
GitLab


From ee6a093222549ac0c72cfd296c69fa5e7d6daa34 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 14 Jan 2009 14:14:00 +0100
Subject: [PATCH 315/492] [CVE-2009-0029] powerpc: Enable syscall wrappers for
 64-bit

This enables the use of syscall wrappers to do proper sign extension
for 64-bit programs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/powerpc/Kconfig     | 1 +
 include/linux/syscalls.h | 6 ++++++
 2 files changed, 7 insertions(+)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 84b861316ce..e39b73bc0ff 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -123,6 +123,7 @@ config PPC
 	select HAVE_DMA_ATTRS if PPC64
 	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
+	select HAVE_SYSCALL_WRAPPERS if PPC64
 
 config EARLY_PRINTK
 	bool
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 0bb537d7ba2..90aa5eba87a 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -103,8 +103,14 @@ struct old_linux_dirent;
 #define SYSCALL_DEFINE5(...)    SYSCALL_DEFINEx(5, __VA_ARGS__)
 #define SYSCALL_DEFINE6(...)    SYSCALL_DEFINEx(6, __VA_ARGS__)
 
+#ifdef CONFIG_PPC64
+#define SYSCALL_ALIAS(alias, name)					\
+	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n"	\
+	     "\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
+#else
 #define SYSCALL_ALIAS(alias, name)					\
 	asm ("\t.globl " #alias "\n\t.set " #alias ", " #name)
+#endif
 
 #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
 
-- 
GitLab


From ed6bb6194350dc6ae97a65dbf2d621a3dbe6bbe9 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:01 +0100
Subject: [PATCH 316/492] [CVE-2009-0029] s390: enable system call wrappers

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/s390/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index a94a3c3ae93..6b0a3538dc6 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -77,6 +77,7 @@ mainmenu "Linux Kernel Configuration"
 config S390
 	def_bool y
 	select USE_GENERIC_SMP_HELPERS if SMP
+	select HAVE_SYSCALL_WRAPPERS
 	select HAVE_FUNCTION_TRACER
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
-- 
GitLab


From 6673e0c3fbeaed2cd08e2fd4a4aa97382d6fedb0 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:02 +0100
Subject: [PATCH 317/492] [CVE-2009-0029] System call wrapper special cases

System calls with an unsigned long long argument can't be converted with
the standard wrappers since that would include a cast to long, which in
turn means that we would lose the upper 32 bit on 32 bit architectures.
Also semctl can't use the standard wrapper since it has a 'union'
parameter.

So we handle them as special case and add some extra wrappers instead.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/dcookies.c   | 10 ++++++++--
 fs/open.c       | 27 ++++++++++++++++++++++++---
 fs/read_write.c | 24 ++++++++++++++++++++----
 fs/sync.c       | 26 ++++++++++++++++++++++----
 ipc/sem.c       |  9 ++++++++-
 mm/fadvise.c    | 18 ++++++++++++++++--
 mm/filemap.c    |  9 ++++++++-
 7 files changed, 106 insertions(+), 17 deletions(-)

diff --git a/fs/dcookies.c b/fs/dcookies.c
index 180e9fec4ad..a21cabdbd87 100644
--- a/fs/dcookies.c
+++ b/fs/dcookies.c
@@ -145,7 +145,7 @@ out:
 /* And here is where the userspace process can look up the cookie value
  * to retrieve the path.
  */
-asmlinkage long sys_lookup_dcookie(u64 cookie64, char __user * buf, size_t len)
+SYSCALL_DEFINE(lookup_dcookie)(u64 cookie64, char __user * buf, size_t len)
 {
 	unsigned long cookie = (unsigned long)cookie64;
 	int err = -EINVAL;
@@ -198,7 +198,13 @@ out:
 	mutex_unlock(&dcookie_mutex);
 	return err;
 }
-
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_lookup_dcookie(u64 cookie64, long buf, long len)
+{
+	return SYSC_lookup_dcookie(cookie64, (char __user *) buf, (size_t) len);
+}
+SYSCALL_ALIAS(sys_lookup_dcookie, SyS_lookup_dcookie);
+#endif
 
 static int dcookie_init(void)
 {
diff --git a/fs/open.c b/fs/open.c
index d882fd2351d..e349013fc79 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -351,21 +351,35 @@ asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length)
 
 /* LFS versions of truncate are only needed on 32 bit machines */
 #if BITS_PER_LONG == 32
-asmlinkage long sys_truncate64(const char __user * path, loff_t length)
+SYSCALL_DEFINE(truncate64)(const char __user * path, loff_t length)
 {
 	return do_sys_truncate(path, length);
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_truncate64(long path, loff_t length)
+{
+	return SYSC_truncate64((const char __user *) path, length);
+}
+SYSCALL_ALIAS(sys_truncate64, SyS_truncate64);
+#endif
 
-asmlinkage long sys_ftruncate64(unsigned int fd, loff_t length)
+SYSCALL_DEFINE(ftruncate64)(unsigned int fd, loff_t length)
 {
 	long ret = do_sys_ftruncate(fd, length, 0);
 	/* avoid REGPARM breakage on x86: */
 	asmlinkage_protect(2, ret, fd, length);
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_ftruncate64(long fd, loff_t length)
+{
+	return SYSC_ftruncate64((unsigned int) fd, length);
+}
+SYSCALL_ALIAS(sys_ftruncate64, SyS_ftruncate64);
 #endif
+#endif /* BITS_PER_LONG == 32 */
 
-asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len)
+SYSCALL_DEFINE(fallocate)(int fd, int mode, loff_t offset, loff_t len)
 {
 	struct file *file;
 	struct inode *inode;
@@ -422,6 +436,13 @@ out_fput:
 out:
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fallocate(long fd, long mode, loff_t offset, loff_t len)
+{
+	return SYSC_fallocate((int)fd, (int)mode, offset, len);
+}
+SYSCALL_ALIAS(sys_fallocate, SyS_fallocate);
+#endif
 
 /*
  * access() needs to use the real uid/gid, not the effective uid/gid.
diff --git a/fs/read_write.c b/fs/read_write.c
index 940367f51f2..7a8326bc590 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -403,8 +403,8 @@ asmlinkage long sys_write(unsigned int fd, const char __user * buf, size_t count
 	return ret;
 }
 
-asmlinkage long sys_pread64(unsigned int fd, char __user *buf,
-			     size_t count, loff_t pos)
+SYSCALL_DEFINE(pread64)(unsigned int fd, char __user *buf,
+			size_t count, loff_t pos)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -423,9 +423,17 @@ asmlinkage long sys_pread64(unsigned int fd, char __user *buf,
 
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_pread64(long fd, long buf, long count, loff_t pos)
+{
+	return SYSC_pread64((unsigned int) fd, (char __user *) buf,
+			    (size_t) count, pos);
+}
+SYSCALL_ALIAS(sys_pread64, SyS_pread64);
+#endif
 
-asmlinkage long sys_pwrite64(unsigned int fd, const char __user *buf,
-			      size_t count, loff_t pos)
+SYSCALL_DEFINE(pwrite64)(unsigned int fd, const char __user *buf,
+			 size_t count, loff_t pos)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -444,6 +452,14 @@ asmlinkage long sys_pwrite64(unsigned int fd, const char __user *buf,
 
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_pwrite64(long fd, long buf, long count, loff_t pos)
+{
+	return SYSC_pwrite64((unsigned int) fd, (const char __user *) buf,
+			     (size_t) count, pos);
+}
+SYSCALL_ALIAS(sys_pwrite64, SyS_pwrite64);
+#endif
 
 /*
  * Reduce an iovec's length in-place.  Return the resulting number of segments
diff --git a/fs/sync.c b/fs/sync.c
index ac02b56548b..23ebbd72ecc 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -201,8 +201,8 @@ asmlinkage long sys_fdatasync(unsigned int fd)
  * already-instantiated disk blocks, there are no guarantees here that the data
  * will be available after a crash.
  */
-asmlinkage long sys_sync_file_range(int fd, loff_t offset, loff_t nbytes,
-					unsigned int flags)
+SYSCALL_DEFINE(sync_file_range)(int fd, loff_t offset, loff_t nbytes,
+				unsigned int flags)
 {
 	int ret;
 	struct file *file;
@@ -262,14 +262,32 @@ out_put:
 out:
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_sync_file_range(long fd, loff_t offset, loff_t nbytes,
+				    long flags)
+{
+	return SYSC_sync_file_range((int) fd, offset, nbytes,
+				    (unsigned int) flags);
+}
+SYSCALL_ALIAS(sys_sync_file_range, SyS_sync_file_range);
+#endif
 
 /* It would be nice if people remember that not all the world's an i386
    when they introduce new system calls */
-asmlinkage long sys_sync_file_range2(int fd, unsigned int flags,
-				     loff_t offset, loff_t nbytes)
+SYSCALL_DEFINE(sync_file_range2)(int fd, unsigned int flags,
+				 loff_t offset, loff_t nbytes)
 {
 	return sys_sync_file_range(fd, offset, nbytes, flags);
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_sync_file_range2(long fd, long flags,
+				     loff_t offset, loff_t nbytes)
+{
+	return SYSC_sync_file_range2((int) fd, (unsigned int) flags,
+				     offset, nbytes);
+}
+SYSCALL_ALIAS(sys_sync_file_range2, SyS_sync_file_range2);
+#endif
 
 /*
  * `endbyte' is inclusive
diff --git a/ipc/sem.c b/ipc/sem.c
index c68cd3f8f0c..c385c40c061 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -887,7 +887,7 @@ out_up:
 	return err;
 }
 
-asmlinkage long sys_semctl (int semid, int semnum, int cmd, union semun arg)
+SYSCALL_DEFINE(semctl)(int semid, int semnum, int cmd, union semun arg)
 {
 	int err = -EINVAL;
 	int version;
@@ -923,6 +923,13 @@ asmlinkage long sys_semctl (int semid, int semnum, int cmd, union semun arg)
 		return -EINVAL;
 	}
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_semctl(int semid, int semnum, int cmd, union semun arg)
+{
+	return SYSC_semctl((int) semid, (int) semnum, (int) cmd, arg);
+}
+SYSCALL_ALIAS(sys_semctl, SyS_semctl);
+#endif
 
 /* If the task doesn't already have a undo_list, then allocate one
  * here.  We guarantee there is only one thread using this undo list,
diff --git a/mm/fadvise.c b/mm/fadvise.c
index a1da969bd98..54a0f8040af 100644
--- a/mm/fadvise.c
+++ b/mm/fadvise.c
@@ -24,7 +24,7 @@
  * POSIX_FADV_WILLNEED could set PG_Referenced, and POSIX_FADV_NOREUSE could
  * deactivate the pages and clear PG_Referenced.
  */
-asmlinkage long sys_fadvise64_64(int fd, loff_t offset, loff_t len, int advice)
+SYSCALL_DEFINE(fadvise64_64)(int fd, loff_t offset, loff_t len, int advice)
 {
 	struct file *file = fget(fd);
 	struct address_space *mapping;
@@ -126,12 +126,26 @@ out:
 	fput(file);
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fadvise64_64(long fd, loff_t offset, loff_t len, long advice)
+{
+	return SYSC_fadvise64_64((int) fd, offset, len, (int) advice);
+}
+SYSCALL_ALIAS(sys_fadvise64_64, SyS_fadvise64_64);
+#endif
 
 #ifdef __ARCH_WANT_SYS_FADVISE64
 
-asmlinkage long sys_fadvise64(int fd, loff_t offset, size_t len, int advice)
+SYSCALL_DEFINE(fadvise64)(int fd, loff_t offset, size_t len, int advice)
 {
 	return sys_fadvise64_64(fd, offset, len, advice);
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_fadvise64(long fd, loff_t offset, long len, long advice)
+{
+	return SYSC_fadvise64((int) fd, offset, (size_t)len, (int)advice);
+}
+SYSCALL_ALIAS(sys_fadvise64, SyS_fadvise64);
+#endif
 
 #endif
diff --git a/mm/filemap.c b/mm/filemap.c
index 538b75ed623..23acefe5180 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1374,7 +1374,7 @@ do_readahead(struct address_space *mapping, struct file *filp,
 	return 0;
 }
 
-asmlinkage long sys_readahead(int fd, loff_t offset, size_t count)
+SYSCALL_DEFINE(readahead)(int fd, loff_t offset, size_t count)
 {
 	ssize_t ret;
 	struct file *file;
@@ -1393,6 +1393,13 @@ asmlinkage long sys_readahead(int fd, loff_t offset, size_t count)
 	}
 	return ret;
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_readahead(long fd, loff_t offset, long count)
+{
+	return SYSC_readahead((int) fd, offset, (size_t) count);
+}
+SYSCALL_ALIAS(sys_readahead, SyS_readahead);
+#endif
 
 #ifdef CONFIG_MMU
 /**
-- 
GitLab


From 58fd3aa288939d3097fa04505b25c2f5e6e144d1 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:03 +0100
Subject: [PATCH 318/492] [CVE-2009-0029] System call wrappers part 01

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 kernel/hrtimer.c |  4 ++--
 kernel/sys.c     |  2 +-
 kernel/time.c    | 14 +++++++-------
 kernel/timer.c   |  6 +++---
 4 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 1455b7651b6..2dc30c59c5f 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -1467,8 +1467,8 @@ out:
 	return ret;
 }
 
-asmlinkage long
-sys_nanosleep(struct timespec __user *rqtp, struct timespec __user *rmtp)
+SYSCALL_DEFINE2(nanosleep, struct timespec __user *, rqtp,
+		struct timespec __user *, rmtp)
 {
 	struct timespec tu;
 
diff --git a/kernel/sys.c b/kernel/sys.c
index 763c3c17ded..37165e55233 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -919,7 +919,7 @@ void do_sys_times(struct tms *tms)
 	tms->tms_cstime = cputime_to_clock_t(cstime);
 }
 
-asmlinkage long sys_times(struct tms __user * tbuf)
+SYSCALL_DEFINE1(times, struct tms __user *, tbuf)
 {
 	if (tbuf) {
 		struct tms tmp;
diff --git a/kernel/time.c b/kernel/time.c
index 4886e3ce83a..29511943871 100644
--- a/kernel/time.c
+++ b/kernel/time.c
@@ -60,7 +60,7 @@ EXPORT_SYMBOL(sys_tz);
  * why not move it into the appropriate arch directory (for those
  * architectures that need it).
  */
-asmlinkage long sys_time(time_t __user * tloc)
+SYSCALL_DEFINE1(time, time_t __user *, tloc)
 {
 	time_t i = get_seconds();
 
@@ -79,7 +79,7 @@ asmlinkage long sys_time(time_t __user * tloc)
  * architectures that need it).
  */
 
-asmlinkage long sys_stime(time_t __user *tptr)
+SYSCALL_DEFINE1(stime, time_t __user *, tptr)
 {
 	struct timespec tv;
 	int err;
@@ -99,8 +99,8 @@ asmlinkage long sys_stime(time_t __user *tptr)
 
 #endif /* __ARCH_WANT_SYS_TIME */
 
-asmlinkage long sys_gettimeofday(struct timeval __user *tv,
-				 struct timezone __user *tz)
+SYSCALL_DEFINE2(gettimeofday, struct timeval __user *, tv,
+		struct timezone __user *, tz)
 {
 	if (likely(tv != NULL)) {
 		struct timeval ktv;
@@ -184,8 +184,8 @@ int do_sys_settimeofday(struct timespec *tv, struct timezone *tz)
 	return 0;
 }
 
-asmlinkage long sys_settimeofday(struct timeval __user *tv,
-				struct timezone __user *tz)
+SYSCALL_DEFINE2(settimeofday, struct timeval __user *, tv,
+		struct timezone __user *, tz)
 {
 	struct timeval user_tv;
 	struct timespec	new_ts;
@@ -205,7 +205,7 @@ asmlinkage long sys_settimeofday(struct timeval __user *tv,
 	return do_sys_settimeofday(tv ? &new_ts : NULL, tz ? &new_tz : NULL);
 }
 
-asmlinkage long sys_adjtimex(struct timex __user *txc_p)
+SYSCALL_DEFINE1(adjtimex, struct timex __user *, txc_p)
 {
 	struct timex txc;		/* Local copy of parameter */
 	int ret;
diff --git a/kernel/timer.c b/kernel/timer.c
index 7b8697d7f04..76041df06c5 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1129,7 +1129,7 @@ void do_timer(unsigned long ticks)
  * For backwards compatibility?  This can be done in libc so Alpha
  * and all newer ports shouldn't need it.
  */
-asmlinkage long sys_alarm(unsigned int seconds)
+SYSCALL_DEFINE1(alarm, unsigned int, seconds)
 {
 	return alarm_setitimer(seconds);
 }
@@ -1152,7 +1152,7 @@ asmlinkage long sys_alarm(unsigned int seconds)
  *
  * This is SMP safe as current->tgid does not change.
  */
-asmlinkage long sys_getpid(void)
+SYSCALL_DEFINE0(getpid)
 {
 	return task_tgid_vnr(current);
 }
@@ -1308,7 +1308,7 @@ signed long __sched schedule_timeout_uninterruptible(signed long timeout)
 EXPORT_SYMBOL(schedule_timeout_uninterruptible);
 
 /* Thread ID - the internal kernel "pid" */
-asmlinkage long sys_gettid(void)
+SYSCALL_DEFINE0(gettid)
 {
 	return task_pid_vnr(current);
 }
-- 
GitLab


From dbf040d9d1cbf1ef6250bdb095c5c118950bcde8 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:04 +0100
Subject: [PATCH 319/492] [CVE-2009-0029] System call wrappers part 02

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 kernel/sys.c   | 10 +++++-----
 kernel/timer.c | 10 +++++-----
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/kernel/sys.c b/kernel/sys.c
index 37165e55233..4c33555f8d9 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -756,7 +756,7 @@ error:
 	return retval;
 }
 
-asmlinkage long sys_getresuid(uid_t __user *ruid, uid_t __user *euid, uid_t __user *suid)
+SYSCALL_DEFINE3(getresuid, uid_t __user *, ruid, uid_t __user *, euid, uid_t __user *, suid)
 {
 	const struct cred *cred = current_cred();
 	int retval;
@@ -814,7 +814,7 @@ error:
 	return retval;
 }
 
-asmlinkage long sys_getresgid(gid_t __user *rgid, gid_t __user *egid, gid_t __user *sgid)
+SYSCALL_DEFINE3(getresgid, gid_t __user *, rgid, gid_t __user *, egid, gid_t __user *, sgid)
 {
 	const struct cred *cred = current_cred();
 	int retval;
@@ -1015,7 +1015,7 @@ out:
 	return err;
 }
 
-asmlinkage long sys_getpgid(pid_t pid)
+SYSCALL_DEFINE1(getpgid, pid_t, pid)
 {
 	struct task_struct *p;
 	struct pid *grp;
@@ -1045,14 +1045,14 @@ out:
 
 #ifdef __ARCH_WANT_SYS_GETPGRP
 
-asmlinkage long sys_getpgrp(void)
+SYSCALL_DEFINE0(getpgrp)
 {
 	return sys_getpgid(0);
 }
 
 #endif
 
-asmlinkage long sys_getsid(pid_t pid)
+SYSCALL_DEFINE1(getsid, pid_t, pid)
 {
 	struct task_struct *p;
 	struct pid *sid;
diff --git a/kernel/timer.c b/kernel/timer.c
index 76041df06c5..14a51530a4c 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1163,7 +1163,7 @@ SYSCALL_DEFINE0(getpid)
  * value of ->real_parent under rcu_read_lock(), see
  * release_task()->call_rcu(delayed_put_task_struct).
  */
-asmlinkage long sys_getppid(void)
+SYSCALL_DEFINE0(getppid)
 {
 	int pid;
 
@@ -1174,25 +1174,25 @@ asmlinkage long sys_getppid(void)
 	return pid;
 }
 
-asmlinkage long sys_getuid(void)
+SYSCALL_DEFINE0(getuid)
 {
 	/* Only we change this so SMP safe */
 	return current_uid();
 }
 
-asmlinkage long sys_geteuid(void)
+SYSCALL_DEFINE0(geteuid)
 {
 	/* Only we change this so SMP safe */
 	return current_euid();
 }
 
-asmlinkage long sys_getgid(void)
+SYSCALL_DEFINE0(getgid)
 {
 	/* Only we change this so SMP safe */
 	return current_gid();
 }
 
-asmlinkage long sys_getegid(void)
+SYSCALL_DEFINE0(getegid)
 {
 	/* Only we change this so SMP safe */
 	return  current_egid();
-- 
GitLab


From ae1251ab785f6da87219df8352ffdac68bba23e4 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:05 +0100
Subject: [PATCH 320/492] [CVE-2009-0029] System call wrappers part 03

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 kernel/sys.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/kernel/sys.c b/kernel/sys.c
index 4c33555f8d9..ace9ced598b 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -478,7 +478,7 @@ void ctrl_alt_del(void)
  * SMP: There are not races, the GIDs are checked only by filesystem
  *      operations (as far as semantic preservation is concerned).
  */
-asmlinkage long sys_setregid(gid_t rgid, gid_t egid)
+SYSCALL_DEFINE2(setregid, gid_t, rgid, gid_t, egid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -529,7 +529,7 @@ error:
  *
  * SMP: Same implicit races as above.
  */
-asmlinkage long sys_setgid(gid_t gid)
+SYSCALL_DEFINE1(setgid, gid_t, gid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -597,7 +597,7 @@ static int set_user(struct cred *new)
  * 100% compatible with BSD.  A program which uses just setuid() will be
  * 100% compatible with POSIX with saved IDs. 
  */
-asmlinkage long sys_setreuid(uid_t ruid, uid_t euid)
+SYSCALL_DEFINE2(setreuid, uid_t, ruid, uid_t, euid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -661,7 +661,7 @@ error:
  * will allow a root program to temporarily drop privileges and be able to
  * regain them by swapping the real and effective uid.  
  */
-asmlinkage long sys_setuid(uid_t uid)
+SYSCALL_DEFINE1(setuid, uid_t, uid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -705,7 +705,7 @@ error:
  * This function implements a generic ability to update ruid, euid,
  * and suid.  This allows you to implement the 4.4 compatible seteuid().
  */
-asmlinkage long sys_setresuid(uid_t ruid, uid_t euid, uid_t suid)
+SYSCALL_DEFINE3(setresuid, uid_t, ruid, uid_t, euid, uid_t, suid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -771,7 +771,7 @@ SYSCALL_DEFINE3(getresuid, uid_t __user *, ruid, uid_t __user *, euid, uid_t __u
 /*
  * Same as above, but for rgid, egid, sgid.
  */
-asmlinkage long sys_setresgid(gid_t rgid, gid_t egid, gid_t sgid)
+SYSCALL_DEFINE3(setresgid, gid_t, rgid, gid_t, egid, gid_t, sgid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -833,7 +833,7 @@ SYSCALL_DEFINE3(getresgid, gid_t __user *, rgid, gid_t __user *, egid, gid_t __u
  * whatever uid it wants to). It normally shadows "euid", except when
  * explicitly set by setfsuid() or for access..
  */
-asmlinkage long sys_setfsuid(uid_t uid)
+SYSCALL_DEFINE1(setfsuid, uid_t, uid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -870,7 +870,7 @@ change_okay:
 /*
  * Samma på svenska..
  */
-asmlinkage long sys_setfsgid(gid_t gid)
+SYSCALL_DEFINE1(setfsgid, gid_t, gid)
 {
 	const struct cred *old;
 	struct cred *new;
@@ -1311,7 +1311,7 @@ int set_current_groups(struct group_info *group_info)
 
 EXPORT_SYMBOL(set_current_groups);
 
-asmlinkage long sys_getgroups(int gidsetsize, gid_t __user *grouplist)
+SYSCALL_DEFINE2(getgroups, int, gidsetsize, gid_t __user *, grouplist)
 {
 	const struct cred *cred = current_cred();
 	int i;
-- 
GitLab


From b290ebe2c46d01b742b948ce03f09e8a3efb9a92 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:06 +0100
Subject: [PATCH 321/492] [CVE-2009-0029] System call wrappers part 04

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 kernel/acct.c        | 2 +-
 kernel/capability.c  | 4 ++--
 kernel/exec_domain.c | 3 +--
 kernel/itimer.c      | 2 +-
 kernel/signal.c      | 7 +++----
 kernel/sys.c         | 6 +++---
 6 files changed, 11 insertions(+), 13 deletions(-)

diff --git a/kernel/acct.c b/kernel/acct.c
index d57b7cbb98b..7afa3156416 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -277,7 +277,7 @@ static int acct_on(char *name)
  * should be written. If the filename is NULL, accounting will be
  * shutdown.
  */
-asmlinkage long sys_acct(const char __user *name)
+SYSCALL_DEFINE1(acct, const char __user *, name)
 {
 	int error;
 
diff --git a/kernel/capability.c b/kernel/capability.c
index 688926e496b..4e17041963f 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -161,7 +161,7 @@ static inline int cap_get_target_pid(pid_t pid, kernel_cap_t *pEp,
  *
  * Returns 0 on success and < 0 on error.
  */
-asmlinkage long sys_capget(cap_user_header_t header, cap_user_data_t dataptr)
+SYSCALL_DEFINE2(capget, cap_user_header_t, header, cap_user_data_t, dataptr)
 {
 	int ret = 0;
 	pid_t pid;
@@ -235,7 +235,7 @@ asmlinkage long sys_capget(cap_user_header_t header, cap_user_data_t dataptr)
  *
  * Returns 0 on success and < 0 on error.
  */
-asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
+SYSCALL_DEFINE2(capset, cap_user_header_t, header, const cap_user_data_t, data)
 {
 	struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
 	unsigned i, tocopy;
diff --git a/kernel/exec_domain.c b/kernel/exec_domain.c
index 0511716e942..667c841c295 100644
--- a/kernel/exec_domain.c
+++ b/kernel/exec_domain.c
@@ -209,8 +209,7 @@ static int __init proc_execdomains_init(void)
 module_init(proc_execdomains_init);
 #endif
 
-asmlinkage long
-sys_personality(u_long personality)
+SYSCALL_DEFINE1(personality, u_long, personality)
 {
 	u_long old = current->personality;
 
diff --git a/kernel/itimer.c b/kernel/itimer.c
index db7c358b9a0..7e0663ea94f 100644
--- a/kernel/itimer.c
+++ b/kernel/itimer.c
@@ -100,7 +100,7 @@ int do_getitimer(int which, struct itimerval *value)
 	return 0;
 }
 
-asmlinkage long sys_getitimer(int which, struct itimerval __user *value)
+SYSCALL_DEFINE2(getitimer, int, which, struct itimerval __user *, value)
 {
 	int error = -EFAULT;
 	struct itimerval get_buffer;
diff --git a/kernel/signal.c b/kernel/signal.c
index 856a5479d49..3fe08eaa5de 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2434,8 +2434,7 @@ out:
 
 #ifdef __ARCH_WANT_SYS_SIGPENDING
 
-asmlinkage long
-sys_sigpending(old_sigset_t __user *set)
+SYSCALL_DEFINE1(sigpending, old_sigset_t __user *, set)
 {
 	return do_sigpending(set, sizeof(*set));
 }
@@ -2446,8 +2445,8 @@ sys_sigpending(old_sigset_t __user *set)
 /* Some platforms have their own version with special arguments others
    support only sys_rt_sigprocmask.  */
 
-asmlinkage long
-sys_sigprocmask(int how, old_sigset_t __user *set, old_sigset_t __user *oset)
+SYSCALL_DEFINE3(sigprocmask, int, how, old_sigset_t __user *, set,
+		old_sigset_t __user *, oset)
 {
 	int error;
 	old_sigset_t old_set, new_set;
diff --git a/kernel/sys.c b/kernel/sys.c
index ace9ced598b..cbe4502c28a 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -944,7 +944,7 @@ SYSCALL_DEFINE1(times, struct tms __user *, tbuf)
  * Auch. Had to add the 'did_exec' flag to conform completely to POSIX.
  * LBT 04.03.94
  */
-asmlinkage long sys_setpgid(pid_t pid, pid_t pgid)
+SYSCALL_DEFINE2(setpgid, pid_t, pid, pid_t, pgid)
 {
 	struct task_struct *p;
 	struct task_struct *group_leader = current->group_leader;
@@ -1080,7 +1080,7 @@ out:
 	return retval;
 }
 
-asmlinkage long sys_setsid(void)
+SYSCALL_DEFINE0(setsid)
 {
 	struct task_struct *group_leader = current->group_leader;
 	struct pid *sid = task_pid(group_leader);
@@ -1340,7 +1340,7 @@ out:
  *	without another task interfering.
  */
  
-asmlinkage long sys_setgroups(int gidsetsize, gid_t __user *grouplist)
+SYSCALL_DEFINE2(setgroups, int, gidsetsize, gid_t __user *, grouplist)
 {
 	struct group_info *group_info;
 	int retval;
-- 
GitLab


From 362e9c07c7220c0a78c88826fc0d2bf7e4a4bb68 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:07 +0100
Subject: [PATCH 322/492] [CVE-2009-0029] System call wrappers part 05

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 kernel/itimer.c       |  5 ++---
 kernel/posix-timers.c | 43 +++++++++++++++++++------------------------
 2 files changed, 21 insertions(+), 27 deletions(-)

diff --git a/kernel/itimer.c b/kernel/itimer.c
index 7e0663ea94f..6a5fe93dd8b 100644
--- a/kernel/itimer.c
+++ b/kernel/itimer.c
@@ -260,9 +260,8 @@ unsigned int alarm_setitimer(unsigned int seconds)
 	return it_old.it_value.tv_sec;
 }
 
-asmlinkage long sys_setitimer(int which,
-			      struct itimerval __user *value,
-			      struct itimerval __user *ovalue)
+SYSCALL_DEFINE3(setitimer, int, which, struct itimerval __user *, value,
+		struct itimerval __user *, ovalue)
 {
 	struct itimerval set_buffer, get_buffer;
 	int error;
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index 887c63787de..052ec4d195c 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -477,10 +477,9 @@ static void release_posix_timer(struct k_itimer *tmr, int it_id_set)
 
 /* Create a POSIX.1b interval timer. */
 
-asmlinkage long
-sys_timer_create(const clockid_t which_clock,
-		 struct sigevent __user *timer_event_spec,
-		 timer_t __user * created_timer_id)
+SYSCALL_DEFINE3(timer_create, const clockid_t, which_clock,
+		struct sigevent __user *, timer_event_spec,
+		timer_t __user *, created_timer_id)
 {
 	struct k_itimer *new_timer;
 	int error, new_timer_id;
@@ -661,8 +660,8 @@ common_timer_get(struct k_itimer *timr, struct itimerspec *cur_setting)
 }
 
 /* Get the time remaining on a POSIX.1b interval timer. */
-asmlinkage long
-sys_timer_gettime(timer_t timer_id, struct itimerspec __user *setting)
+SYSCALL_DEFINE2(timer_gettime, timer_t, timer_id,
+		struct itimerspec __user *, setting)
 {
 	struct k_itimer *timr;
 	struct itimerspec cur_setting;
@@ -691,8 +690,7 @@ sys_timer_gettime(timer_t timer_id, struct itimerspec __user *setting)
  * the call back to do_schedule_next_timer().  So all we need to do is
  * to pick up the frozen overrun.
  */
-asmlinkage long
-sys_timer_getoverrun(timer_t timer_id)
+SYSCALL_DEFINE1(timer_getoverrun, timer_t, timer_id)
 {
 	struct k_itimer *timr;
 	int overrun;
@@ -760,10 +758,9 @@ common_timer_set(struct k_itimer *timr, int flags,
 }
 
 /* Set a POSIX.1b interval timer */
-asmlinkage long
-sys_timer_settime(timer_t timer_id, int flags,
-		  const struct itimerspec __user *new_setting,
-		  struct itimerspec __user *old_setting)
+SYSCALL_DEFINE4(timer_settime, timer_t, timer_id, int, flags,
+		const struct itimerspec __user *, new_setting,
+		struct itimerspec __user *, old_setting)
 {
 	struct k_itimer *timr;
 	struct itimerspec new_spec, old_spec;
@@ -816,8 +813,7 @@ static inline int timer_delete_hook(struct k_itimer *timer)
 }
 
 /* Delete a POSIX.1b interval timer. */
-asmlinkage long
-sys_timer_delete(timer_t timer_id)
+SYSCALL_DEFINE1(timer_delete, timer_t, timer_id)
 {
 	struct k_itimer *timer;
 	unsigned long flags;
@@ -903,8 +899,8 @@ int do_posix_clock_nonanosleep(const clockid_t clock, int flags,
 }
 EXPORT_SYMBOL_GPL(do_posix_clock_nonanosleep);
 
-asmlinkage long sys_clock_settime(const clockid_t which_clock,
-				  const struct timespec __user *tp)
+SYSCALL_DEFINE2(clock_settime, const clockid_t, which_clock,
+		const struct timespec __user *, tp)
 {
 	struct timespec new_tp;
 
@@ -916,8 +912,8 @@ asmlinkage long sys_clock_settime(const clockid_t which_clock,
 	return CLOCK_DISPATCH(which_clock, clock_set, (which_clock, &new_tp));
 }
 
-asmlinkage long
-sys_clock_gettime(const clockid_t which_clock, struct timespec __user *tp)
+SYSCALL_DEFINE2(clock_gettime, const clockid_t, which_clock,
+		struct timespec __user *,tp)
 {
 	struct timespec kernel_tp;
 	int error;
@@ -933,8 +929,8 @@ sys_clock_gettime(const clockid_t which_clock, struct timespec __user *tp)
 
 }
 
-asmlinkage long
-sys_clock_getres(const clockid_t which_clock, struct timespec __user *tp)
+SYSCALL_DEFINE2(clock_getres, const clockid_t, which_clock,
+		struct timespec __user *, tp)
 {
 	struct timespec rtn_tp;
 	int error;
@@ -963,10 +959,9 @@ static int common_nsleep(const clockid_t which_clock, int flags,
 				 which_clock);
 }
 
-asmlinkage long
-sys_clock_nanosleep(const clockid_t which_clock, int flags,
-		    const struct timespec __user *rqtp,
-		    struct timespec __user *rmtp)
+SYSCALL_DEFINE4(clock_nanosleep, const clockid_t, which_clock, int, flags,
+		const struct timespec __user *, rqtp,
+		struct timespec __user *, rmtp)
 {
 	struct timespec t;
 
-- 
GitLab


From 5add95d4f7cf08f6f62510f19576992912387501 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:08 +0100
Subject: [PATCH 323/492] [CVE-2009-0029] System call wrappers part 06

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 kernel/sched.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index 8be2c13b50d..1a0fdfa5ddf 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -5126,7 +5126,7 @@ int can_nice(const struct task_struct *p, const int nice)
  * sys_setpriority is a more generic, but much slower function that
  * does similar things.
  */
-asmlinkage long sys_nice(int increment)
+SYSCALL_DEFINE1(nice, int, increment)
 {
 	long nice, retval;
 
@@ -5433,8 +5433,8 @@ do_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
  * @policy: new policy.
  * @param: structure containing the new RT priority.
  */
-asmlinkage long
-sys_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
+SYSCALL_DEFINE3(sched_setscheduler, pid_t, pid, int, policy,
+		struct sched_param __user *, param)
 {
 	/* negative values for policy are not valid */
 	if (policy < 0)
@@ -5448,7 +5448,7 @@ sys_sched_setscheduler(pid_t pid, int policy, struct sched_param __user *param)
  * @pid: the pid in question.
  * @param: structure containing the new RT priority.
  */
-asmlinkage long sys_sched_setparam(pid_t pid, struct sched_param __user *param)
+SYSCALL_DEFINE2(sched_setparam, pid_t, pid, struct sched_param __user *, param)
 {
 	return do_sched_setscheduler(pid, -1, param);
 }
@@ -5457,7 +5457,7 @@ asmlinkage long sys_sched_setparam(pid_t pid, struct sched_param __user *param)
  * sys_sched_getscheduler - get the policy (scheduling class) of a thread
  * @pid: the pid in question.
  */
-asmlinkage long sys_sched_getscheduler(pid_t pid)
+SYSCALL_DEFINE1(sched_getscheduler, pid_t, pid)
 {
 	struct task_struct *p;
 	int retval;
@@ -5482,7 +5482,7 @@ asmlinkage long sys_sched_getscheduler(pid_t pid)
  * @pid: the pid in question.
  * @param: structure containing the RT priority.
  */
-asmlinkage long sys_sched_getparam(pid_t pid, struct sched_param __user *param)
+SYSCALL_DEFINE2(sched_getparam, pid_t, pid, struct sched_param __user *, param)
 {
 	struct sched_param lp;
 	struct task_struct *p;
@@ -5600,8 +5600,8 @@ static int get_user_cpu_mask(unsigned long __user *user_mask_ptr, unsigned len,
  * @len: length in bytes of the bitmask pointed to by user_mask_ptr
  * @user_mask_ptr: user-space pointer to the new cpu mask
  */
-asmlinkage long sys_sched_setaffinity(pid_t pid, unsigned int len,
-				      unsigned long __user *user_mask_ptr)
+SYSCALL_DEFINE3(sched_setaffinity, pid_t, pid, unsigned int, len,
+		unsigned long __user *, user_mask_ptr)
 {
 	cpumask_var_t new_mask;
 	int retval;
@@ -5648,8 +5648,8 @@ out_unlock:
  * @len: length in bytes of the bitmask pointed to by user_mask_ptr
  * @user_mask_ptr: user-space pointer to hold the current cpu mask
  */
-asmlinkage long sys_sched_getaffinity(pid_t pid, unsigned int len,
-				      unsigned long __user *user_mask_ptr)
+SYSCALL_DEFINE3(sched_getaffinity, pid_t, pid, unsigned int, len,
+		unsigned long __user *, user_mask_ptr)
 {
 	int ret;
 	cpumask_var_t mask;
@@ -5678,7 +5678,7 @@ asmlinkage long sys_sched_getaffinity(pid_t pid, unsigned int len,
  * This function yields the current CPU to other tasks. If there are no
  * other threads running on this CPU then this function will return.
  */
-asmlinkage long sys_sched_yield(void)
+SYSCALL_DEFINE0(sched_yield)
 {
 	struct rq *rq = this_rq_lock();
 
@@ -5819,7 +5819,7 @@ long __sched io_schedule_timeout(long timeout)
  * this syscall returns the maximum rt_priority that can be used
  * by a given scheduling class.
  */
-asmlinkage long sys_sched_get_priority_max(int policy)
+SYSCALL_DEFINE1(sched_get_priority_max, int, policy)
 {
 	int ret = -EINVAL;
 
@@ -5844,7 +5844,7 @@ asmlinkage long sys_sched_get_priority_max(int policy)
  * this syscall returns the minimum rt_priority that can be used
  * by a given scheduling class.
  */
-asmlinkage long sys_sched_get_priority_min(int policy)
+SYSCALL_DEFINE1(sched_get_priority_min, int, policy)
 {
 	int ret = -EINVAL;
 
-- 
GitLab


From 754fe8d297bfae7b77f7ce866e2fb0c5fb186506 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:09 +0100
Subject: [PATCH 324/492] [CVE-2009-0029] System call wrappers part 07

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 kernel/exit.c   | 8 ++++----
 kernel/kexec.c  | 5 ++---
 kernel/sched.c  | 4 ++--
 kernel/signal.c | 2 +-
 kernel/sys.c    | 7 ++++---
 net/socket.c    | 2 +-
 6 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/kernel/exit.c b/kernel/exit.c
index fac9b040af2..08895df0eab 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1141,7 +1141,7 @@ NORET_TYPE void complete_and_exit(struct completion *comp, long code)
 
 EXPORT_SYMBOL(complete_and_exit);
 
-asmlinkage long sys_exit(int error_code)
+SYSCALL_DEFINE1(exit, int, error_code)
 {
 	do_exit((error_code&0xff)<<8);
 }
@@ -1182,7 +1182,7 @@ do_group_exit(int exit_code)
  * wait4()-ing process will get the correct exit code - even if this
  * thread is not the thread group leader.
  */
-asmlinkage long sys_exit_group(int error_code)
+SYSCALL_DEFINE1(exit_group, int, error_code)
 {
 	do_group_exit((error_code & 0xff) << 8);
 	/* NOTREACHED */
@@ -1795,8 +1795,8 @@ asmlinkage long sys_waitid(int which, pid_t upid,
 	return ret;
 }
 
-asmlinkage long sys_wait4(pid_t upid, int __user *stat_addr,
-			  int options, struct rusage __user *ru)
+SYSCALL_DEFINE4(wait4, pid_t, upid, int __user *, stat_addr,
+		int, options, struct rusage __user *, ru)
 {
 	struct pid *pid = NULL;
 	enum pid_type type;
diff --git a/kernel/kexec.c b/kernel/kexec.c
index 3fb855ad6aa..8a6d7b08864 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -934,9 +934,8 @@ struct kimage *kexec_crash_image;
 
 static DEFINE_MUTEX(kexec_mutex);
 
-asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments,
-				struct kexec_segment __user *segments,
-				unsigned long flags)
+SYSCALL_DEFINE4(kexec_load, unsigned long, entry, unsigned long, nr_segments,
+		struct kexec_segment __user *, segments, unsigned long, flags)
 {
 	struct kimage **dest_image, *image;
 	int result;
diff --git a/kernel/sched.c b/kernel/sched.c
index 1a0fdfa5ddf..65c02037b05 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -5869,8 +5869,8 @@ SYSCALL_DEFINE1(sched_get_priority_min, int, policy)
  * this syscall writes the default timeslice value of a given process
  * into the user-space timespec buffer. A value of '0' means infinity.
  */
-asmlinkage
-long sys_sched_rr_get_interval(pid_t pid, struct timespec __user *interval)
+SYSCALL_DEFINE4(sched_rr_get_interval, pid_t, pid,
+		struct timespec __user *, interval)
 {
 	struct task_struct *p;
 	unsigned int time_slice;
diff --git a/kernel/signal.c b/kernel/signal.c
index 3fe08eaa5de..41f32e08615 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1961,7 +1961,7 @@ EXPORT_SYMBOL(unblock_all_signals);
  * System call entry points.
  */
 
-asmlinkage long sys_restart_syscall(void)
+SYSCALL_DEFINE0(restart_syscall)
 {
 	struct restart_block *restart = &current_thread_info()->restart_block;
 	return restart->fn(restart);
diff --git a/kernel/sys.c b/kernel/sys.c
index cbe4502c28a..39b192b4003 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -143,7 +143,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_setpriority(int which, int who, int niceval)
+SYSCALL_DEFINE3(setpriority, int, which, int, who, int, niceval)
 {
 	struct task_struct *g, *p;
 	struct user_struct *user;
@@ -208,7 +208,7 @@ out:
  * has been offset by 20 (ie it returns 40..1 instead of -20..19)
  * to stay compatible.
  */
-asmlinkage long sys_getpriority(int which, int who)
+SYSCALL_DEFINE2(getpriority, int, which, int, who)
 {
 	struct task_struct *g, *p;
 	struct user_struct *user;
@@ -355,7 +355,8 @@ EXPORT_SYMBOL_GPL(kernel_power_off);
  *
  * reboot doesn't sync: do that yourself before calling this.
  */
-asmlinkage long sys_reboot(int magic1, int magic2, unsigned int cmd, void __user * arg)
+SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
+		void __user *, arg)
 {
 	char buffer[256];
 
diff --git a/net/socket.c b/net/socket.c
index 06603d73c41..cc9b666e58f 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1789,7 +1789,7 @@ out_put:
  *	Shutdown a socket.
  */
 
-asmlinkage long sys_shutdown(int fd, int how)
+SYSCALL_DEFINE2(shutdown, int, fd, int, how)
 {
 	int err, fput_needed;
 	struct socket *sock;
-- 
GitLab


From 17da2bd90abf428523de0fb98f7075e00e3ed42e Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:10 +0100
Subject: [PATCH 325/492] [CVE-2009-0029] System call wrappers part 08

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 kernel/exit.c   |  7 +++----
 kernel/fork.c   |  2 +-
 kernel/futex.c  |  6 +++---
 kernel/module.c | 10 ++++------
 kernel/sched.c  |  2 +-
 kernel/signal.c | 18 +++++++-----------
 6 files changed, 19 insertions(+), 26 deletions(-)

diff --git a/kernel/exit.c b/kernel/exit.c
index 08895df0eab..f80dec3f187 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -1754,9 +1754,8 @@ end:
 	return retval;
 }
 
-asmlinkage long sys_waitid(int which, pid_t upid,
-			   struct siginfo __user *infop, int options,
-			   struct rusage __user *ru)
+SYSCALL_DEFINE5(waitid, int, which, pid_t, upid, struct siginfo __user *,
+		infop, int, options, struct rusage __user *, ru)
 {
 	struct pid *pid = NULL;
 	enum pid_type type;
@@ -1833,7 +1832,7 @@ SYSCALL_DEFINE4(wait4, pid_t, upid, int __user *, stat_addr,
  * sys_waitpid() remains for compatibility. waitpid() should be
  * implemented by calling sys_wait4() from libc.a.
  */
-asmlinkage long sys_waitpid(pid_t pid, int __user *stat_addr, int options)
+SYSCALL_DEFINE3(waitpid, pid_t, pid, int __user *, stat_addr, int, options)
 {
 	return sys_wait4(pid, stat_addr, options, NULL);
 }
diff --git a/kernel/fork.c b/kernel/fork.c
index 1d68f1255dd..8eb37d38c6a 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -901,7 +901,7 @@ static void copy_flags(unsigned long clone_flags, struct task_struct *p)
 	clear_freeze_flag(p);
 }
 
-asmlinkage long sys_set_tid_address(int __user *tidptr)
+SYSCALL_DEFINE1(set_tid_address, int __user *, tidptr)
 {
 	current->clear_child_tid = tidptr;
 
diff --git a/kernel/futex.c b/kernel/futex.c
index 002aa189eb0..e86931d8d4e 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1978,9 +1978,9 @@ long do_futex(u32 __user *uaddr, int op, u32 val, ktime_t *timeout,
 }
 
 
-asmlinkage long sys_futex(u32 __user *uaddr, int op, u32 val,
-			  struct timespec __user *utime, u32 __user *uaddr2,
-			  u32 val3)
+SYSCALL_DEFINE6(futex, u32 __user *, uaddr, int, op, u32, val,
+		struct timespec __user *, utime, u32 __user *, uaddr2,
+		u32, val3)
 {
 	struct timespec ts;
 	ktime_t t, *tp = NULL;
diff --git a/kernel/module.c b/kernel/module.c
index c9332c90d5a..e8b51d41dd7 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -743,8 +743,8 @@ static void wait_for_zero_refcount(struct module *mod)
 	mutex_lock(&module_mutex);
 }
 
-asmlinkage long
-sys_delete_module(const char __user *name_user, unsigned int flags)
+SYSCALL_DEFINE2(delete_module, const char __user *, name_user,
+		unsigned int, flags)
 {
 	struct module *mod;
 	char name[MODULE_NAME_LEN];
@@ -2296,10 +2296,8 @@ static noinline struct module *load_module(void __user *umod,
 }
 
 /* This is where the real work happens */
-asmlinkage long
-sys_init_module(void __user *umod,
-		unsigned long len,
-		const char __user *uargs)
+SYSCALL_DEFINE3(init_module, void __user *, umod,
+		unsigned long, len, const char __user *, uargs)
 {
 	struct module *mod;
 	int ret = 0;
diff --git a/kernel/sched.c b/kernel/sched.c
index 65c02037b05..eb1931eef58 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -5869,7 +5869,7 @@ SYSCALL_DEFINE1(sched_get_priority_min, int, policy)
  * this syscall writes the default timeslice value of a given process
  * into the user-space timespec buffer. A value of '0' means infinity.
  */
-SYSCALL_DEFINE4(sched_rr_get_interval, pid_t, pid,
+SYSCALL_DEFINE2(sched_rr_get_interval, pid_t, pid,
 		struct timespec __user *, interval)
 {
 	struct task_struct *p;
diff --git a/kernel/signal.c b/kernel/signal.c
index 41f32e08615..278cc8737f1 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2014,8 +2014,8 @@ int sigprocmask(int how, sigset_t *set, sigset_t *oldset)
 	return error;
 }
 
-asmlinkage long
-sys_rt_sigprocmask(int how, sigset_t __user *set, sigset_t __user *oset, size_t sigsetsize)
+SYSCALL_DEFINE4(rt_sigprocmask, int, how, sigset_t __user *, set,
+		sigset_t __user *, oset, size_t, sigsetsize)
 {
 	int error = -EINVAL;
 	sigset_t old_set, new_set;
@@ -2074,8 +2074,7 @@ out:
 	return error;
 }	
 
-asmlinkage long
-sys_rt_sigpending(sigset_t __user *set, size_t sigsetsize)
+SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, set, size_t, sigsetsize)
 {
 	return do_sigpending(set, sigsetsize);
 }
@@ -2146,11 +2145,9 @@ int copy_siginfo_to_user(siginfo_t __user *to, siginfo_t *from)
 
 #endif
 
-asmlinkage long
-sys_rt_sigtimedwait(const sigset_t __user *uthese,
-		    siginfo_t __user *uinfo,
-		    const struct timespec __user *uts,
-		    size_t sigsetsize)
+SYSCALL_DEFINE4(rt_sigtimedwait, const sigset_t __user *, uthese,
+		siginfo_t __user *, uinfo, const struct timespec __user *, uts,
+		size_t, sigsetsize)
 {
 	int ret, sig;
 	sigset_t these;
@@ -2223,8 +2220,7 @@ sys_rt_sigtimedwait(const sigset_t __user *uthese,
 	return ret;
 }
 
-asmlinkage long
-sys_kill(pid_t pid, int sig)
+SYSCALL_DEFINE2(kill, pid_t, pid, int, sig)
 {
 	struct siginfo info;
 
-- 
GitLab


From a5f8fa9e9ba5ef3305e147f41ad6e1e84ac1f0bd Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:11 +0100
Subject: [PATCH 326/492] [CVE-2009-0029] System call wrappers part 09

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/sync.c       |  6 +++---
 kernel/signal.c | 21 ++++++++-------------
 2 files changed, 11 insertions(+), 16 deletions(-)

diff --git a/fs/sync.c b/fs/sync.c
index 23ebbd72ecc..a16d53e5fe9 100644
--- a/fs/sync.c
+++ b/fs/sync.c
@@ -36,7 +36,7 @@ static void do_sync(unsigned long wait)
 		laptop_sync_completion();
 }
 
-asmlinkage long sys_sync(void)
+SYSCALL_DEFINE0(sync)
 {
 	do_sync(1);
 	return 0;
@@ -144,12 +144,12 @@ static int do_fsync(unsigned int fd, int datasync)
 	return ret;
 }
 
-asmlinkage long sys_fsync(unsigned int fd)
+SYSCALL_DEFINE1(fsync, unsigned int, fd)
 {
 	return do_fsync(fd, 0);
 }
 
-asmlinkage long sys_fdatasync(unsigned int fd)
+SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
 {
 	return do_fsync(fd, 1);
 }
diff --git a/kernel/signal.c b/kernel/signal.c
index 278cc8737f1..e2333929611 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2279,7 +2279,7 @@ static int do_tkill(pid_t tgid, pid_t pid, int sig)
  *  exists but it's not belonging to the target process anymore. This
  *  method solves the problem of threads exiting and PIDs getting reused.
  */
-asmlinkage long sys_tgkill(pid_t tgid, pid_t pid, int sig)
+SYSCALL_DEFINE3(tgkill, pid_t, tgid, pid_t, pid, int, sig)
 {
 	/* This is only valid for single tasks */
 	if (pid <= 0 || tgid <= 0)
@@ -2291,8 +2291,7 @@ asmlinkage long sys_tgkill(pid_t tgid, pid_t pid, int sig)
 /*
  *  Send a signal to only one task, even if it's a CLONE_THREAD task.
  */
-asmlinkage long
-sys_tkill(pid_t pid, int sig)
+SYSCALL_DEFINE2(tkill, pid_t, pid, int, sig)
 {
 	/* This is only valid for single tasks */
 	if (pid <= 0)
@@ -2301,8 +2300,8 @@ sys_tkill(pid_t pid, int sig)
 	return do_tkill(0, pid, sig);
 }
 
-asmlinkage long
-sys_rt_sigqueueinfo(pid_t pid, int sig, siginfo_t __user *uinfo)
+SYSCALL_DEFINE3(rt_sigqueueinfo, pid_t, pid, int, sig,
+		siginfo_t __user *, uinfo)
 {
 	siginfo_t info;
 
@@ -2526,15 +2525,13 @@ out:
 /*
  * For backwards compatibility.  Functionality superseded by sigprocmask.
  */
-asmlinkage long
-sys_sgetmask(void)
+SYSCALL_DEFINE0(sgetmask)
 {
 	/* SMP safe */
 	return current->blocked.sig[0];
 }
 
-asmlinkage long
-sys_ssetmask(int newmask)
+SYSCALL_DEFINE1(ssetmask, int, newmask)
 {
 	int old;
 
@@ -2554,8 +2551,7 @@ sys_ssetmask(int newmask)
 /*
  * For backwards compatibility.  Functionality superseded by sigaction.
  */
-asmlinkage long
-sys_signal(int sig, __sighandler_t handler)
+SYSCALL_DEFINE2(signal, int, sig, __sighandler_t, handler)
 {
 	struct k_sigaction new_sa, old_sa;
 	int ret;
@@ -2572,8 +2568,7 @@ sys_signal(int sig, __sighandler_t handler)
 
 #ifdef __ARCH_WANT_SYS_PAUSE
 
-asmlinkage long
-sys_pause(void)
+SYSCALL_DEFINE0(pause)
 {
 	current->state = TASK_INTERRUPTIBLE;
 	schedule();
-- 
GitLab


From bdc480e3bef6eb0e7071770834cbdda7e30a5436 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:12 +0100
Subject: [PATCH 327/492] [CVE-2009-0029] System call wrappers part 10

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/buffer.c    |  2 +-
 fs/namespace.c |  9 ++++-----
 fs/open.c      | 12 +++++-------
 fs/stat.c      |  2 +-
 4 files changed, 11 insertions(+), 14 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index b6e8b8632e2..b58208f1640 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -3243,7 +3243,7 @@ void block_sync_page(struct page *page)
  * Use of bdflush() is deprecated and will be removed in a future kernel.
  * The `pdflush' kernel threads fully replace bdflush daemons and this call.
  */
-asmlinkage long sys_bdflush(int func, long data)
+SYSCALL_DEFINE2(bdflush, int, func, long, data)
 {
 	static int msg_count;
 
diff --git a/fs/namespace.c b/fs/namespace.c
index a40685d800a..3876a0fbaa6 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1128,7 +1128,7 @@ static int do_umount(struct vfsmount *mnt, int flags)
  * unixes. Our API is identical to OSF/1 to avoid making a mess of AMD
  */
 
-asmlinkage long sys_umount(char __user * name, int flags)
+SYSCALL_DEFINE2(umount, char __user *, name, int, flags)
 {
 	struct path path;
 	int retval;
@@ -1160,7 +1160,7 @@ out:
 /*
  *	The 2.0 compatible umount. No flags.
  */
-asmlinkage long sys_oldumount(char __user * name)
+SYSCALL_DEFINE1(oldumount, char __user *, name)
 {
 	return sys_umount(name, 0);
 }
@@ -2045,9 +2045,8 @@ struct mnt_namespace *copy_mnt_ns(unsigned long flags, struct mnt_namespace *ns,
 	return new_ns;
 }
 
-asmlinkage long sys_mount(char __user * dev_name, char __user * dir_name,
-			  char __user * type, unsigned long flags,
-			  void __user * data)
+SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
+		char __user *, type, unsigned long, flags, void __user *, data)
 {
 	int retval;
 	unsigned long data_page;
diff --git a/fs/open.c b/fs/open.c
index e349013fc79..f6c2f5673ed 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -122,7 +122,7 @@ static int vfs_statfs64(struct dentry *dentry, struct statfs64 *buf)
 	return 0;
 }
 
-asmlinkage long sys_statfs(const char __user *pathname, struct statfs __user * buf)
+SYSCALL_DEFINE2(statfs, const char __user *, pathname, struct statfs __user *, buf)
 {
 	struct path path;
 	int error;
@@ -138,8 +138,7 @@ asmlinkage long sys_statfs(const char __user *pathname, struct statfs __user * b
 	return error;
 }
 
-
-asmlinkage long sys_statfs64(const char __user *pathname, size_t sz, struct statfs64 __user *buf)
+SYSCALL_DEFINE3(statfs64, const char __user *, pathname, size_t, sz, struct statfs64 __user *, buf)
 {
 	struct path path;
 	long error;
@@ -157,8 +156,7 @@ asmlinkage long sys_statfs64(const char __user *pathname, size_t sz, struct stat
 	return error;
 }
 
-
-asmlinkage long sys_fstatfs(unsigned int fd, struct statfs __user * buf)
+SYSCALL_DEFINE2(fstatfs, unsigned int, fd, struct statfs __user *, buf)
 {
 	struct file * file;
 	struct statfs tmp;
@@ -289,7 +287,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_truncate(const char __user * path, unsigned long length)
+SYSCALL_DEFINE2(truncate, const char __user *, path, unsigned long, length)
 {
 	/* on 32-bit boxen it will cut the range 2^31--2^32-1 off */
 	return do_sys_truncate(path, (long)length);
@@ -341,7 +339,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_ftruncate(unsigned int fd, unsigned long length)
+SYSCALL_DEFINE2(ftruncate, unsigned int, fd, unsigned long, length)
 {
 	long ret = do_sys_ftruncate(fd, length, 1);
 	/* avoid REGPARM breakage on x86: */
diff --git a/fs/stat.c b/fs/stat.c
index 7e12a6f8279..a1411648048 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -152,7 +152,7 @@ static int cp_old_stat(struct kstat *stat, struct __old_kernel_stat __user * sta
 	return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_stat(char __user * filename, struct __old_kernel_stat __user * statbuf)
+SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
-- 
GitLab


From 257ac264d69017270fbc3cf5536953525db4076c Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:13 +0100
Subject: [PATCH 328/492] [CVE-2009-0029] System call wrappers part 11

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/open.c  |  2 +-
 fs/stat.c  | 20 ++++++++++++--------
 fs/super.c |  2 +-
 3 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/fs/open.c b/fs/open.c
index f6c2f5673ed..322bb60d168 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -174,7 +174,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_fstatfs64(unsigned int fd, size_t sz, struct statfs64 __user *buf)
+SYSCALL_DEFINE3(fstatfs64, unsigned int, fd, size_t, sz, struct statfs64 __user *, buf)
 {
 	struct file * file;
 	struct statfs64 tmp;
diff --git a/fs/stat.c b/fs/stat.c
index a1411648048..f29c5fe4f8b 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -162,7 +162,8 @@ SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *
 
 	return error;
 }
-asmlinkage long sys_lstat(char __user * filename, struct __old_kernel_stat __user * statbuf)
+
+SYSCALL_DEFINE2(lstat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
@@ -172,7 +173,8 @@ asmlinkage long sys_lstat(char __user * filename, struct __old_kernel_stat __use
 
 	return error;
 }
-asmlinkage long sys_fstat(unsigned int fd, struct __old_kernel_stat __user * statbuf)
+
+SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_fstat(fd, &stat);
@@ -235,7 +237,7 @@ static int cp_new_stat(struct kstat *stat, struct stat __user *statbuf)
 	return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_newstat(char __user *filename, struct stat __user *statbuf)
+SYSCALL_DEFINE2(newstat, char __user *, filename, struct stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
@@ -246,7 +248,7 @@ asmlinkage long sys_newstat(char __user *filename, struct stat __user *statbuf)
 	return error;
 }
 
-asmlinkage long sys_newlstat(char __user *filename, struct stat __user *statbuf)
+SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
@@ -280,7 +282,7 @@ out:
 }
 #endif
 
-asmlinkage long sys_newfstat(unsigned int fd, struct stat __user *statbuf)
+SYSCALL_DEFINE2(newfstat, unsigned int, fd, struct stat __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_fstat(fd, &stat);
@@ -365,7 +367,7 @@ static long cp_new_stat64(struct kstat *stat, struct stat64 __user *statbuf)
 	return copy_to_user(statbuf,&tmp,sizeof(tmp)) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_stat64(char __user * filename, struct stat64 __user * statbuf)
+SYSCALL_DEFINE2(stat64, char __user *, filename, struct stat64 __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_stat(filename, &stat);
@@ -375,7 +377,8 @@ asmlinkage long sys_stat64(char __user * filename, struct stat64 __user * statbu
 
 	return error;
 }
-asmlinkage long sys_lstat64(char __user * filename, struct stat64 __user * statbuf)
+
+SYSCALL_DEFINE2(lstat64, char __user *, filename, struct stat64 __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_lstat(filename, &stat);
@@ -385,7 +388,8 @@ asmlinkage long sys_lstat64(char __user * filename, struct stat64 __user * statb
 
 	return error;
 }
-asmlinkage long sys_fstat64(unsigned long fd, struct stat64 __user * statbuf)
+
+SYSCALL_DEFINE2(fstat64, unsigned long, fd, struct stat64 __user *, statbuf)
 {
 	struct kstat stat;
 	int error = vfs_fstat(fd, &stat);
diff --git a/fs/super.c b/fs/super.c
index ed080c41716..645e5403f2a 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -544,7 +544,7 @@ rescan:
 	return NULL;
 }
 
-asmlinkage long sys_ustat(unsigned dev, struct ustat __user * ubuf)
+SYSCALL_DEFINE2(ustat, unsigned, dev, struct ustat __user *, ubuf)
 {
         struct super_block *s;
         struct ustat tmp;
-- 
GitLab


From 64fd1de3d821659ac0a3004fd5ee1de59e64af30 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:14 +0100
Subject: [PATCH 329/492] [CVE-2009-0029] System call wrappers part 12

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/xattr.c | 46 +++++++++++++++++++++-------------------------
 1 file changed, 21 insertions(+), 25 deletions(-)

diff --git a/fs/xattr.c b/fs/xattr.c
index d049ae27aae..0367a5dae2b 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -251,9 +251,9 @@ setxattr(struct dentry *d, const char __user *name, const void __user *value,
 	return error;
 }
 
-asmlinkage long
-sys_setxattr(const char __user *pathname, const char __user *name,
-	     const void __user *value, size_t size, int flags)
+SYSCALL_DEFINE5(setxattr, const char __user *, pathname,
+		const char __user *, name, const void __user *, value,
+		size_t, size, int, flags)
 {
 	struct path path;
 	int error;
@@ -270,9 +270,9 @@ sys_setxattr(const char __user *pathname, const char __user *name,
 	return error;
 }
 
-asmlinkage long
-sys_lsetxattr(const char __user *pathname, const char __user *name,
-	      const void __user *value, size_t size, int flags)
+SYSCALL_DEFINE5(lsetxattr, const char __user *, pathname,
+		const char __user *, name, const void __user *, value,
+		size_t, size, int, flags)
 {
 	struct path path;
 	int error;
@@ -289,9 +289,8 @@ sys_lsetxattr(const char __user *pathname, const char __user *name,
 	return error;
 }
 
-asmlinkage long
-sys_fsetxattr(int fd, const char __user *name, const void __user *value,
-	      size_t size, int flags)
+SYSCALL_DEFINE5(fsetxattr, int, fd, const char __user *, name,
+		const void __user *,value, size_t, size, int, flags)
 {
 	struct file *f;
 	struct dentry *dentry;
@@ -349,9 +348,8 @@ getxattr(struct dentry *d, const char __user *name, void __user *value,
 	return error;
 }
 
-asmlinkage long
-sys_getxattr(const char __user *pathname, const char __user *name,
-	     void __user *value, size_t size)
+SYSCALL_DEFINE4(getxattr, const char __user *, pathname,
+		const char __user *, name, void __user *, value, size_t, size)
 {
 	struct path path;
 	ssize_t error;
@@ -364,9 +362,8 @@ sys_getxattr(const char __user *pathname, const char __user *name,
 	return error;
 }
 
-asmlinkage long
-sys_lgetxattr(const char __user *pathname, const char __user *name, void __user *value,
-	      size_t size)
+SYSCALL_DEFINE4(lgetxattr, const char __user *, pathname,
+		const char __user *, name, void __user *, value, size_t, size)
 {
 	struct path path;
 	ssize_t error;
@@ -379,8 +376,8 @@ sys_lgetxattr(const char __user *pathname, const char __user *name, void __user
 	return error;
 }
 
-asmlinkage long
-sys_fgetxattr(int fd, const char __user *name, void __user *value, size_t size)
+SYSCALL_DEFINE4(fgetxattr, int, fd, const char __user *, name,
+		void __user *, value, size_t, size)
 {
 	struct file *f;
 	ssize_t error = -EBADF;
@@ -424,8 +421,8 @@ listxattr(struct dentry *d, char __user *list, size_t size)
 	return error;
 }
 
-asmlinkage long
-sys_listxattr(const char __user *pathname, char __user *list, size_t size)
+SYSCALL_DEFINE3(listxattr, const char __user *, pathname, char __user *, list,
+		size_t, size)
 {
 	struct path path;
 	ssize_t error;
@@ -438,8 +435,8 @@ sys_listxattr(const char __user *pathname, char __user *list, size_t size)
 	return error;
 }
 
-asmlinkage long
-sys_llistxattr(const char __user *pathname, char __user *list, size_t size)
+SYSCALL_DEFINE3(llistxattr, const char __user *, pathname, char __user *, list,
+		size_t, size)
 {
 	struct path path;
 	ssize_t error;
@@ -452,8 +449,7 @@ sys_llistxattr(const char __user *pathname, char __user *list, size_t size)
 	return error;
 }
 
-asmlinkage long
-sys_flistxattr(int fd, char __user *list, size_t size)
+SYSCALL_DEFINE3(flistxattr, int, fd, char __user *, list, size_t, size)
 {
 	struct file *f;
 	ssize_t error = -EBADF;
@@ -485,8 +481,8 @@ removexattr(struct dentry *d, const char __user *name)
 	return vfs_removexattr(d, kname);
 }
 
-asmlinkage long
-sys_removexattr(const char __user *pathname, const char __user *name)
+SYSCALL_DEFINE2(removexattr, const char __user *, pathname,
+		const char __user *, name)
 {
 	struct path path;
 	int error;
-- 
GitLab


From 6a6160a7b5c27b3c38651baef92a14fa7072b3c1 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:15 +0100
Subject: [PATCH 330/492] [CVE-2009-0029] System call wrappers part 13

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/xattr.c    |  7 +++----
 mm/fremap.c   |  4 ++--
 mm/mlock.c    |  4 ++--
 mm/mmap.c     |  4 ++--
 mm/mprotect.c |  4 ++--
 mm/mremap.c   |  6 +++---
 mm/msync.c    |  2 +-
 mm/nommu.c    | 11 +++++------
 8 files changed, 20 insertions(+), 22 deletions(-)

diff --git a/fs/xattr.c b/fs/xattr.c
index 0367a5dae2b..197c4fcac03 100644
--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -499,8 +499,8 @@ SYSCALL_DEFINE2(removexattr, const char __user *, pathname,
 	return error;
 }
 
-asmlinkage long
-sys_lremovexattr(const char __user *pathname, const char __user *name)
+SYSCALL_DEFINE2(lremovexattr, const char __user *, pathname,
+		const char __user *, name)
 {
 	struct path path;
 	int error;
@@ -517,8 +517,7 @@ sys_lremovexattr(const char __user *pathname, const char __user *name)
 	return error;
 }
 
-asmlinkage long
-sys_fremovexattr(int fd, const char __user *name)
+SYSCALL_DEFINE2(fremovexattr, int, fd, const char __user *, name)
 {
 	struct file *f;
 	struct dentry *dentry;
diff --git a/mm/fremap.c b/mm/fremap.c
index 62d5bbda921..736ba7f3306 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -120,8 +120,8 @@ static int populate_range(struct mm_struct *mm, struct vm_area_struct *vma,
  * and the vma's default protection is used. Arbitrary protections
  * might be implemented in the future.
  */
-asmlinkage long sys_remap_file_pages(unsigned long start, unsigned long size,
-	unsigned long prot, unsigned long pgoff, unsigned long flags)
+SYSCALL_DEFINE5(remap_file_pages, unsigned long, start, unsigned long, size,
+		unsigned long, prot, unsigned long, pgoff, unsigned long, flags)
 {
 	struct mm_struct *mm = current->mm;
 	struct address_space *mapping;
diff --git a/mm/mlock.c b/mm/mlock.c
index e125156c664..04d5e7429c5 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -530,7 +530,7 @@ static int do_mlock(unsigned long start, size_t len, int on)
 	return error;
 }
 
-asmlinkage long sys_mlock(unsigned long start, size_t len)
+SYSCALL_DEFINE2(mlock, unsigned long, start, size_t, len)
 {
 	unsigned long locked;
 	unsigned long lock_limit;
@@ -558,7 +558,7 @@ asmlinkage long sys_mlock(unsigned long start, size_t len)
 	return error;
 }
 
-asmlinkage long sys_munlock(unsigned long start, size_t len)
+SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len)
 {
 	int ret;
 
diff --git a/mm/mmap.c b/mm/mmap.c
index a970d890cb2..8d95902e9a3 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -245,7 +245,7 @@ static struct vm_area_struct *remove_vma(struct vm_area_struct *vma)
 	return next;
 }
 
-asmlinkage long sys_brk(unsigned long brk)
+SYSCALL_DEFINE1(brk, unsigned long, brk)
 {
 	unsigned long rlim, retval;
 	unsigned long newbrk, oldbrk;
@@ -1948,7 +1948,7 @@ int do_munmap(struct mm_struct *mm, unsigned long start, size_t len)
 
 EXPORT_SYMBOL(do_munmap);
 
-asmlinkage long sys_munmap(unsigned long addr, size_t len)
+SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len)
 {
 	int ret;
 	struct mm_struct *mm = current->mm;
diff --git a/mm/mprotect.c b/mm/mprotect.c
index d0f6e7ce09f..abe2694e13f 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -217,8 +217,8 @@ fail:
 	return error;
 }
 
-asmlinkage long
-sys_mprotect(unsigned long start, size_t len, unsigned long prot)
+SYSCALL_DEFINE3(mprotect, unsigned long, start, size_t, len,
+		unsigned long, prot)
 {
 	unsigned long vm_flags, nstart, end, tmp, reqprot;
 	struct vm_area_struct *vma, *prev;
diff --git a/mm/mremap.c b/mm/mremap.c
index 5572e0825d8..a39b7b91be4 100644
--- a/mm/mremap.c
+++ b/mm/mremap.c
@@ -420,9 +420,9 @@ out_nc:
 	return ret;
 }
 
-asmlinkage long sys_mremap(unsigned long addr,
-	unsigned long old_len, unsigned long new_len,
-	unsigned long flags, unsigned long new_addr)
+SYSCALL_DEFINE5(mremap, unsigned long, addr, unsigned long, old_len,
+		unsigned long, new_len, unsigned long, flags,
+		unsigned long, new_addr)
 {
 	unsigned long ret;
 
diff --git a/mm/msync.c b/mm/msync.c
index 07dae08cf31..4083209b7f0 100644
--- a/mm/msync.c
+++ b/mm/msync.c
@@ -28,7 +28,7 @@
  * So by _not_ starting I/O in MS_ASYNC we provide complete flexibility to
  * applications.
  */
-asmlinkage long sys_msync(unsigned long start, size_t len, int flags)
+SYSCALL_DEFINE3(msync, unsigned long, start, size_t, len, int, flags)
 {
 	unsigned long end;
 	struct mm_struct *mm = current->mm;
diff --git a/mm/nommu.c b/mm/nommu.c
index ee3e7892773..8cee8c8ff0f 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -416,7 +416,7 @@ EXPORT_SYMBOL(vm_insert_page);
  *  to a regular file.  in this case, the unmapping will need
  *  to invoke file system routines that need the global lock.
  */
-asmlinkage long sys_brk(unsigned long brk)
+SYSCALL_DEFINE1(brk, unsigned long, brk)
 {
 	struct mm_struct *mm = current->mm;
 
@@ -1573,7 +1573,7 @@ erase_whole_vma:
 }
 EXPORT_SYMBOL(do_munmap);
 
-asmlinkage long sys_munmap(unsigned long addr, size_t len)
+SYSCALL_DEFINE2(munmap, unsigned long, addr, size_t, len)
 {
 	int ret;
 	struct mm_struct *mm = current->mm;
@@ -1657,10 +1657,9 @@ unsigned long do_mremap(unsigned long addr,
 }
 EXPORT_SYMBOL(do_mremap);
 
-asmlinkage
-unsigned long sys_mremap(unsigned long addr,
-			 unsigned long old_len, unsigned long new_len,
-			 unsigned long flags, unsigned long new_addr)
+SYSCALL_DEFINE5(mremap, unsigned long, addr, unsigned long, old_len,
+		unsigned long, new_len, unsigned long, flags,
+		unsigned long, new_addr)
 {
 	unsigned long ret;
 
-- 
GitLab


From 3480b25743cb7404928d57efeaa3d085708b04c2 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:16 +0100
Subject: [PATCH 331/492] [CVE-2009-0029] System call wrappers part 14

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/namei.c     | 8 ++++----
 fs/namespace.c | 4 ++--
 fs/open.c      | 2 +-
 mm/madvise.c   | 2 +-
 mm/mincore.c   | 4 ++--
 mm/mlock.c     | 4 ++--
 6 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index f05bed24242..43fa2525972 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2017,7 +2017,7 @@ out_unlock:
 	return error;
 }
 
-asmlinkage long sys_mknod(const char __user *filename, int mode, unsigned dev)
+SYSCALL_DEFINE3(mknod, const char __user *, filename, int, mode, unsigned, dev)
 {
 	return sys_mknodat(AT_FDCWD, filename, mode, dev);
 }
@@ -2302,7 +2302,7 @@ asmlinkage long sys_unlinkat(int dfd, const char __user *pathname, int flag)
 	return do_unlinkat(dfd, pathname);
 }
 
-asmlinkage long sys_unlink(const char __user *pathname)
+SYSCALL_DEFINE1(unlink, const char __user *, pathname)
 {
 	return do_unlinkat(AT_FDCWD, pathname);
 }
@@ -2370,7 +2370,7 @@ out_putname:
 	return error;
 }
 
-asmlinkage long sys_symlink(const char __user *oldname, const char __user *newname)
+SYSCALL_DEFINE2(symlink, const char __user *, oldname, const char __user *, newname)
 {
 	return sys_symlinkat(oldname, AT_FDCWD, newname);
 }
@@ -2473,7 +2473,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_link(const char __user *oldname, const char __user *newname)
+SYSCALL_DEFINE2(link, const char __user *, oldname, const char __user *, newname)
 {
 	return sys_linkat(AT_FDCWD, oldname, AT_FDCWD, newname, 0);
 }
diff --git a/fs/namespace.c b/fs/namespace.c
index 3876a0fbaa6..228d8c4bfd1 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -2171,8 +2171,8 @@ static void chroot_fs_refs(struct path *old_root, struct path *new_root)
  *    though, so you may need to say mount --bind /nfs/my_root /nfs/my_root
  *    first.
  */
-asmlinkage long sys_pivot_root(const char __user * new_root,
-			       const char __user * put_old)
+SYSCALL_DEFINE2(pivot_root, const char __user *, new_root,
+		const char __user *, put_old)
 {
 	struct vfsmount *tmp;
 	struct path new, old, parent_path, root_parent, root;
diff --git a/fs/open.c b/fs/open.c
index 322bb60d168..9b926de6ed9 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -569,7 +569,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_chroot(const char __user * filename)
+SYSCALL_DEFINE1(chroot, const char __user *, filename)
 {
 	struct path path;
 	int error;
diff --git a/mm/madvise.c b/mm/madvise.c
index f9349c18a1b..b9ce574827c 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -281,7 +281,7 @@ madvise_vma(struct vm_area_struct *vma, struct vm_area_struct **prev,
  *  -EBADF  - map exists, but area maps something that isn't a file.
  *  -EAGAIN - a kernel resource was temporarily unavailable.
  */
-asmlinkage long sys_madvise(unsigned long start, size_t len_in, int behavior)
+SYSCALL_DEFINE3(madvise, unsigned long, start, size_t, len_in, int, behavior)
 {
 	unsigned long end, tmp;
 	struct vm_area_struct * vma, *prev;
diff --git a/mm/mincore.c b/mm/mincore.c
index 5178800bc12..8cb508f84ea 100644
--- a/mm/mincore.c
+++ b/mm/mincore.c
@@ -177,8 +177,8 @@ none_mapped:
  *		mapped
  *  -EAGAIN - A kernel resource was temporarily unavailable.
  */
-asmlinkage long sys_mincore(unsigned long start, size_t len,
-	unsigned char __user * vec)
+SYSCALL_DEFINE3(mincore, unsigned long, start, size_t, len,
+		unsigned char __user *, vec)
 {
 	long retval;
 	unsigned long pages;
diff --git a/mm/mlock.c b/mm/mlock.c
index 04d5e7429c5..2904a347e47 100644
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -595,7 +595,7 @@ out:
 	return 0;
 }
 
-asmlinkage long sys_mlockall(int flags)
+SYSCALL_DEFINE1(mlockall, int, flags)
 {
 	unsigned long lock_limit;
 	int ret = -EINVAL;
@@ -623,7 +623,7 @@ out:
 	return ret;
 }
 
-asmlinkage long sys_munlockall(void)
+SYSCALL_DEFINE0(munlockall)
 {
 	int ret;
 
-- 
GitLab


From a26eab2400f0477bfac0255600552394855016f7 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:17 +0100
Subject: [PATCH 332/492] [CVE-2009-0029] System call wrappers part 15

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/fcntl.c | 11 ++++++-----
 fs/ioctl.c |  2 +-
 fs/namei.c |  2 +-
 fs/open.c  |  4 ++--
 4 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/fs/fcntl.c b/fs/fcntl.c
index cdc14194672..bd215cc791d 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -50,7 +50,7 @@ static int get_close_on_exec(unsigned int fd)
 	return res;
 }
 
-asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags)
+SYSCALL_DEFINE3(dup3, unsigned int, oldfd, unsigned int, newfd, int, flags)
 {
 	int err = -EBADF;
 	struct file * file, *tofree;
@@ -113,7 +113,7 @@ out_unlock:
 	return err;
 }
 
-asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
+SYSCALL_DEFINE2(dup2, unsigned int, oldfd, unsigned int, newfd)
 {
 	if (unlikely(newfd == oldfd)) { /* corner case */
 		struct files_struct *files = current->files;
@@ -126,7 +126,7 @@ asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd)
 	return sys_dup3(oldfd, newfd, 0);
 }
 
-asmlinkage long sys_dup(unsigned int fildes)
+SYSCALL_DEFINE1(dup, unsigned int, fildes)
 {
 	int ret = -EBADF;
 	struct file *file = fget(fildes);
@@ -335,7 +335,7 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg,
 	return err;
 }
 
-asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg)
+SYSCALL_DEFINE3(fcntl, unsigned int, fd, unsigned int, cmd, unsigned long, arg)
 {	
 	struct file *filp;
 	long err = -EBADF;
@@ -358,7 +358,8 @@ out:
 }
 
 #if BITS_PER_LONG == 32
-asmlinkage long sys_fcntl64(unsigned int fd, unsigned int cmd, unsigned long arg)
+SYSCALL_DEFINE3(fcntl64, unsigned int, fd, unsigned int, cmd,
+		unsigned long, arg)
 {	
 	struct file * filp;
 	long err;
diff --git a/fs/ioctl.c b/fs/ioctl.c
index 20b0a8a24c6..240ec63984c 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -542,7 +542,7 @@ int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
 	return error;
 }
 
-asmlinkage long sys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg)
+SYSCALL_DEFINE3(ioctl, unsigned int, fd, unsigned int, cmd, unsigned long, arg)
 {
 	struct file *filp;
 	int error = -EBADF;
diff --git a/fs/namei.c b/fs/namei.c
index 43fa2525972..00c4f37a039 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2718,7 +2718,7 @@ exit:
 	return error;
 }
 
-asmlinkage long sys_rename(const char __user *oldname, const char __user *newname)
+SYSCALL_DEFINE2(rename, const char __user *, oldname, const char __user *, newname)
 {
 	return sys_renameat(AT_FDCWD, oldname, AT_FDCWD, newname);
 }
diff --git a/fs/open.c b/fs/open.c
index 9b926de6ed9..ecc75a2c262 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -594,7 +594,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_fchmod(unsigned int fd, mode_t mode)
+SYSCALL_DEFINE2(fchmod, unsigned int, fd, mode_t, mode)
 {
 	struct inode * inode;
 	struct dentry * dentry;
@@ -658,7 +658,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_chmod(const char __user *filename, mode_t mode)
+SYSCALL_DEFINE2(chmod, const char __user *, filename, mode_t, mode)
 {
 	return sys_fchmodat(AT_FDCWD, filename, mode);
 }
-- 
GitLab


From 002c8976ee537724b20a5e179d9b349309438836 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:18 +0100
Subject: [PATCH 333/492] [CVE-2009-0029] System call wrappers part 16

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/aio.c        | 22 +++++++++++-----------
 fs/locks.c      |  2 +-
 fs/open.c       |  2 +-
 fs/read_write.c |  4 ++--
 fs/stat.c       |  4 ++--
 5 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/fs/aio.c b/fs/aio.c
index d6f89d3c15e..8fa77e23394 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -1270,7 +1270,7 @@ static void io_destroy(struct kioctx *ioctx)
  *	pointer is passed for ctxp.  Will fail with -ENOSYS if not
  *	implemented.
  */
-asmlinkage long sys_io_setup(unsigned nr_events, aio_context_t __user *ctxp)
+SYSCALL_DEFINE2(io_setup, unsigned, nr_events, aio_context_t __user *, ctxp)
 {
 	struct kioctx *ioctx = NULL;
 	unsigned long ctx;
@@ -1308,7 +1308,7 @@ out:
  *	implemented.  May fail with -EFAULT if the context pointed to
  *	is invalid.
  */
-asmlinkage long sys_io_destroy(aio_context_t ctx)
+SYSCALL_DEFINE1(io_destroy, aio_context_t, ctx)
 {
 	struct kioctx *ioctx = lookup_ioctx(ctx);
 	if (likely(NULL != ioctx)) {
@@ -1662,8 +1662,8 @@ out_put_req:
  *	are available to queue any iocbs.  Will return 0 if nr is 0.  Will
  *	fail with -ENOSYS if not implemented.
  */
-asmlinkage long sys_io_submit(aio_context_t ctx_id, long nr,
-			      struct iocb __user * __user *iocbpp)
+SYSCALL_DEFINE3(io_submit, aio_context_t, ctx_id, long, nr,
+		struct iocb __user * __user *, iocbpp)
 {
 	struct kioctx *ctx;
 	long ret = 0;
@@ -1737,8 +1737,8 @@ static struct kiocb *lookup_kiocb(struct kioctx *ctx, struct iocb __user *iocb,
  *	invalid.  May fail with -EAGAIN if the iocb specified was not
  *	cancelled.  Will fail with -ENOSYS if not implemented.
  */
-asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb,
-			      struct io_event __user *result)
+SYSCALL_DEFINE3(io_cancel, aio_context_t, ctx_id, struct iocb __user *, iocb,
+		struct io_event __user *, result)
 {
 	int (*cancel)(struct kiocb *iocb, struct io_event *res);
 	struct kioctx *ctx;
@@ -1799,11 +1799,11 @@ asmlinkage long sys_io_cancel(aio_context_t ctx_id, struct iocb __user *iocb,
  *	will be updated if not NULL and the operation blocks.  Will fail
  *	with -ENOSYS if not implemented.
  */
-asmlinkage long sys_io_getevents(aio_context_t ctx_id,
-				 long min_nr,
-				 long nr,
-				 struct io_event __user *events,
-				 struct timespec __user *timeout)
+SYSCALL_DEFINE5(io_getevents, aio_context_t, ctx_id,
+		long, min_nr,
+		long, nr,
+		struct io_event __user *, events,
+		struct timespec __user *, timeout)
 {
 	struct kioctx *ioctx = lookup_ioctx(ctx_id);
 	long ret = -EINVAL;
diff --git a/fs/locks.c b/fs/locks.c
index 46a2e12f7d4..ec3deea29e3 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -1564,7 +1564,7 @@ EXPORT_SYMBOL(flock_lock_file_wait);
  *	%LOCK_MAND can be combined with %LOCK_READ or %LOCK_WRITE to allow other
  *	processes read and write access respectively.
  */
-asmlinkage long sys_flock(unsigned int fd, unsigned int cmd)
+SYSCALL_DEFINE2(flock, unsigned int, fd, unsigned int, cmd)
 {
 	struct file *filp;
 	struct file_lock *lock;
diff --git a/fs/open.c b/fs/open.c
index ecc75a2c262..293408b1c16 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1081,7 +1081,7 @@ asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
  * For backward compatibility?  Maybe this should be moved
  * into arch/i386 instead?
  */
-asmlinkage long sys_creat(const char __user * pathname, int mode)
+SYSCALL_DEFINE2(creat, const char __user *, pathname, int, mode)
 {
 	return sys_open(pathname, O_CREAT | O_WRONLY | O_TRUNC, mode);
 }
diff --git a/fs/read_write.c b/fs/read_write.c
index 7a8326bc590..0671aa016b6 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -828,7 +828,7 @@ out:
 	return retval;
 }
 
-asmlinkage long sys_sendfile(int out_fd, int in_fd, off_t __user *offset, size_t count)
+SYSCALL_DEFINE4(sendfile, int, out_fd, int, in_fd, off_t __user *, offset, size_t, count)
 {
 	loff_t pos;
 	off_t off;
@@ -847,7 +847,7 @@ asmlinkage long sys_sendfile(int out_fd, int in_fd, off_t __user *offset, size_t
 	return do_sendfile(out_fd, in_fd, NULL, count, 0);
 }
 
-asmlinkage long sys_sendfile64(int out_fd, int in_fd, loff_t __user *offset, size_t count)
+SYSCALL_DEFINE4(sendfile64, int, out_fd, int, in_fd, loff_t __user *, offset, size_t, count)
 {
 	loff_t pos;
 	ssize_t ret;
diff --git a/fs/stat.c b/fs/stat.c
index f29c5fe4f8b..d712a0dfb50 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -320,8 +320,8 @@ asmlinkage long sys_readlinkat(int dfd, const char __user *pathname,
 	return error;
 }
 
-asmlinkage long sys_readlink(const char __user *path, char __user *buf,
-				int bufsiz)
+SYSCALL_DEFINE3(readlink, const char __user *, path, char __user *, buf,
+		int, bufsiz)
 {
 	return sys_readlinkat(AT_FDCWD, path, buf, bufsiz);
 }
-- 
GitLab


From ca013e945b1ba5828b151ee646946f1297b67a4c Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:19 +0100
Subject: [PATCH 334/492] [CVE-2009-0029] System call wrappers part 17

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/open.c      | 16 +++++++---------
 kernel/uid16.c |  6 +++---
 2 files changed, 10 insertions(+), 12 deletions(-)

diff --git a/fs/open.c b/fs/open.c
index 293408b1c16..4a6d8006474 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -517,7 +517,7 @@ out:
 	return res;
 }
 
-asmlinkage long sys_access(const char __user *filename, int mode)
+SYSCALL_DEFINE2(access, const char __user *, filename, int, mode)
 {
 	return sys_faccessat(AT_FDCWD, filename, mode);
 }
@@ -688,7 +688,7 @@ static int chown_common(struct dentry * dentry, uid_t user, gid_t group)
 	return error;
 }
 
-asmlinkage long sys_chown(const char __user * filename, uid_t user, gid_t group)
+SYSCALL_DEFINE3(chown, const char __user *, filename, uid_t, user, gid_t, group)
 {
 	struct path path;
 	int error;
@@ -732,7 +732,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_lchown(const char __user * filename, uid_t user, gid_t group)
+SYSCALL_DEFINE3(lchown, const char __user *, filename, uid_t, user, gid_t, group)
 {
 	struct path path;
 	int error;
@@ -751,8 +751,7 @@ out:
 	return error;
 }
 
-
-asmlinkage long sys_fchown(unsigned int fd, uid_t user, gid_t group)
+SYSCALL_DEFINE3(fchown, unsigned int, fd, uid_t, user, gid_t, group)
 {
 	struct file * file;
 	int error = -EBADF;
@@ -1048,7 +1047,7 @@ long do_sys_open(int dfd, const char __user *filename, int flags, int mode)
 	return fd;
 }
 
-asmlinkage long sys_open(const char __user *filename, int flags, int mode)
+SYSCALL_DEFINE3(open, const char __user *, filename, int, flags, int, mode)
 {
 	long ret;
 
@@ -1117,7 +1116,7 @@ EXPORT_SYMBOL(filp_close);
  * releasing the fd. This ensures that one clone task can't release
  * an fd while another clone is opening it.
  */
-asmlinkage long sys_close(unsigned int fd)
+SYSCALL_DEFINE1(close, unsigned int, fd)
 {
 	struct file * filp;
 	struct files_struct *files = current->files;
@@ -1150,14 +1149,13 @@ out_unlock:
 	spin_unlock(&files->file_lock);
 	return -EBADF;
 }
-
 EXPORT_SYMBOL(sys_close);
 
 /*
  * This routine simulates a hangup on the tty, to arrange that users
  * are given clean terminals at login time.
  */
-asmlinkage long sys_vhangup(void)
+SYSCALL_DEFINE0(vhangup)
 {
 	if (capable(CAP_SYS_TTY_CONFIG)) {
 		tty_vhangup_self();
diff --git a/kernel/uid16.c b/kernel/uid16.c
index 2460c3199b5..37f48c049a2 100644
--- a/kernel/uid16.c
+++ b/kernel/uid16.c
@@ -17,7 +17,7 @@
 
 #include <asm/uaccess.h>
 
-asmlinkage long sys_chown16(const char __user * filename, old_uid_t user, old_gid_t group)
+SYSCALL_DEFINE3(chown16, const char __user *, filename, old_uid_t, user, old_gid_t, group)
 {
 	long ret = sys_chown(filename, low2highuid(user), low2highgid(group));
 	/* avoid REGPARM breakage on x86: */
@@ -25,7 +25,7 @@ asmlinkage long sys_chown16(const char __user * filename, old_uid_t user, old_gi
 	return ret;
 }
 
-asmlinkage long sys_lchown16(const char __user * filename, old_uid_t user, old_gid_t group)
+SYSCALL_DEFINE3(lchown16, const char __user *, filename, old_uid_t, user, old_gid_t, group)
 {
 	long ret = sys_lchown(filename, low2highuid(user), low2highgid(group));
 	/* avoid REGPARM breakage on x86: */
@@ -33,7 +33,7 @@ asmlinkage long sys_lchown16(const char __user * filename, old_uid_t user, old_g
 	return ret;
 }
 
-asmlinkage long sys_fchown16(unsigned int fd, old_uid_t user, old_gid_t group)
+SYSCALL_DEFINE3(fchown16, unsigned int, fd, old_uid_t, user, old_gid_t, group)
 {
 	long ret = sys_fchown(fd, low2highuid(user), low2highgid(group));
 	/* avoid REGPARM breakage on x86: */
-- 
GitLab


From a6b42e83f249aad723589b2bdf6d1dfb2b0997c8 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:20 +0100
Subject: [PATCH 335/492] [CVE-2009-0029] System call wrappers part 18

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 kernel/uid16.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/kernel/uid16.c b/kernel/uid16.c
index 37f48c049a2..221894e6e98 100644
--- a/kernel/uid16.c
+++ b/kernel/uid16.c
@@ -41,7 +41,7 @@ SYSCALL_DEFINE3(fchown16, unsigned int, fd, old_uid_t, user, old_gid_t, group)
 	return ret;
 }
 
-asmlinkage long sys_setregid16(old_gid_t rgid, old_gid_t egid)
+SYSCALL_DEFINE2(setregid16, old_gid_t, rgid, old_gid_t, egid)
 {
 	long ret = sys_setregid(low2highgid(rgid), low2highgid(egid));
 	/* avoid REGPARM breakage on x86: */
@@ -49,7 +49,7 @@ asmlinkage long sys_setregid16(old_gid_t rgid, old_gid_t egid)
 	return ret;
 }
 
-asmlinkage long sys_setgid16(old_gid_t gid)
+SYSCALL_DEFINE1(setgid16, old_gid_t, gid)
 {
 	long ret = sys_setgid(low2highgid(gid));
 	/* avoid REGPARM breakage on x86: */
@@ -57,7 +57,7 @@ asmlinkage long sys_setgid16(old_gid_t gid)
 	return ret;
 }
 
-asmlinkage long sys_setreuid16(old_uid_t ruid, old_uid_t euid)
+SYSCALL_DEFINE2(setreuid16, old_uid_t, ruid, old_uid_t, euid)
 {
 	long ret = sys_setreuid(low2highuid(ruid), low2highuid(euid));
 	/* avoid REGPARM breakage on x86: */
@@ -65,7 +65,7 @@ asmlinkage long sys_setreuid16(old_uid_t ruid, old_uid_t euid)
 	return ret;
 }
 
-asmlinkage long sys_setuid16(old_uid_t uid)
+SYSCALL_DEFINE1(setuid16, old_uid_t, uid)
 {
 	long ret = sys_setuid(low2highuid(uid));
 	/* avoid REGPARM breakage on x86: */
@@ -73,7 +73,7 @@ asmlinkage long sys_setuid16(old_uid_t uid)
 	return ret;
 }
 
-asmlinkage long sys_setresuid16(old_uid_t ruid, old_uid_t euid, old_uid_t suid)
+SYSCALL_DEFINE3(setresuid16, old_uid_t, ruid, old_uid_t, euid, old_uid_t, suid)
 {
 	long ret = sys_setresuid(low2highuid(ruid), low2highuid(euid),
 				 low2highuid(suid));
@@ -82,7 +82,7 @@ asmlinkage long sys_setresuid16(old_uid_t ruid, old_uid_t euid, old_uid_t suid)
 	return ret;
 }
 
-asmlinkage long sys_getresuid16(old_uid_t __user *ruid, old_uid_t __user *euid, old_uid_t __user *suid)
+SYSCALL_DEFINE3(getresuid16, old_uid_t __user *, ruid, old_uid_t __user *, euid, old_uid_t __user *, suid)
 {
 	const struct cred *cred = current_cred();
 	int retval;
@@ -94,7 +94,7 @@ asmlinkage long sys_getresuid16(old_uid_t __user *ruid, old_uid_t __user *euid,
 	return retval;
 }
 
-asmlinkage long sys_setresgid16(old_gid_t rgid, old_gid_t egid, old_gid_t sgid)
+SYSCALL_DEFINE3(setresgid16, old_gid_t, rgid, old_gid_t, egid, old_gid_t, sgid)
 {
 	long ret = sys_setresgid(low2highgid(rgid), low2highgid(egid),
 				 low2highgid(sgid));
@@ -103,7 +103,8 @@ asmlinkage long sys_setresgid16(old_gid_t rgid, old_gid_t egid, old_gid_t sgid)
 	return ret;
 }
 
-asmlinkage long sys_getresgid16(old_gid_t __user *rgid, old_gid_t __user *egid, old_gid_t __user *sgid)
+
+SYSCALL_DEFINE3(getresgid16, old_gid_t __user *, rgid, old_gid_t __user *, egid, old_gid_t __user *, sgid)
 {
 	const struct cred *cred = current_cred();
 	int retval;
@@ -115,7 +116,7 @@ asmlinkage long sys_getresgid16(old_gid_t __user *rgid, old_gid_t __user *egid,
 	return retval;
 }
 
-asmlinkage long sys_setfsuid16(old_uid_t uid)
+SYSCALL_DEFINE1(setfsuid16, old_uid_t, uid)
 {
 	long ret = sys_setfsuid(low2highuid(uid));
 	/* avoid REGPARM breakage on x86: */
@@ -123,7 +124,7 @@ asmlinkage long sys_setfsuid16(old_uid_t uid)
 	return ret;
 }
 
-asmlinkage long sys_setfsgid16(old_gid_t gid)
+SYSCALL_DEFINE1(setfsgid16, old_gid_t, gid)
 {
 	long ret = sys_setfsgid(low2highgid(gid));
 	/* avoid REGPARM breakage on x86: */
-- 
GitLab


From 003d7ab479168132a2b2c6700fe682b08f08ab0c Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:21 +0100
Subject: [PATCH 336/492] [CVE-2009-0029] System call wrappers part 19

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/read_write.c |  8 ++++----
 fs/utimes.c     |  5 +++--
 kernel/uid16.c  | 12 ++++++------
 3 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/fs/read_write.c b/fs/read_write.c
index 0671aa016b6..fad10af59d9 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -147,7 +147,7 @@ loff_t vfs_llseek(struct file *file, loff_t offset, int origin)
 }
 EXPORT_SYMBOL(vfs_llseek);
 
-asmlinkage long sys_lseek(unsigned int fd, off_t offset, unsigned int origin)
+SYSCALL_DEFINE3(lseek, unsigned int, fd, off_t, offset, unsigned int, origin)
 {
 	off_t retval;
 	struct file * file;
@@ -171,9 +171,9 @@ bad:
 }
 
 #ifdef __ARCH_WANT_SYS_LLSEEK
-asmlinkage long sys_llseek(unsigned int fd, unsigned long offset_high,
-			   unsigned long offset_low, loff_t __user * result,
-			   unsigned int origin)
+SYSCALL_DEFINE5(llseek, unsigned int, fd, unsigned long, offset_high,
+		unsigned long, offset_low, loff_t __user *, result,
+		unsigned int, origin)
 {
 	int retval;
 	struct file * file;
diff --git a/fs/utimes.c b/fs/utimes.c
index 6929e3e91d0..ee853615798 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -24,7 +24,7 @@
  * must be owner or have write permission.
  * Else, update from *times, must be owner or super user.
  */
-asmlinkage long sys_utime(char __user *filename, struct utimbuf __user *times)
+SYSCALL_DEFINE2(utime, char __user *, filename, struct utimbuf __user *, times)
 {
 	struct timespec tv[2];
 
@@ -214,7 +214,8 @@ asmlinkage long sys_futimesat(int dfd, char __user *filename, struct timeval __u
 	return do_utimes(dfd, filename, utimes ? tstimes : NULL, 0);
 }
 
-asmlinkage long sys_utimes(char __user *filename, struct timeval __user *utimes)
+SYSCALL_DEFINE2(utimes, char __user *, filename,
+		struct timeval __user *, utimes)
 {
 	return sys_futimesat(AT_FDCWD, filename, utimes);
 }
diff --git a/kernel/uid16.c b/kernel/uid16.c
index 221894e6e98..0314501688b 100644
--- a/kernel/uid16.c
+++ b/kernel/uid16.c
@@ -162,7 +162,7 @@ static int groups16_from_user(struct group_info *group_info,
 	return 0;
 }
 
-asmlinkage long sys_getgroups16(int gidsetsize, old_gid_t __user *grouplist)
+SYSCALL_DEFINE2(getgroups16, int, gidsetsize, old_gid_t __user *, grouplist)
 {
 	const struct cred *cred = current_cred();
 	int i;
@@ -185,7 +185,7 @@ out:
 	return i;
 }
 
-asmlinkage long sys_setgroups16(int gidsetsize, old_gid_t __user *grouplist)
+SYSCALL_DEFINE2(setgroups16, int, gidsetsize, old_gid_t __user *, grouplist)
 {
 	struct group_info *group_info;
 	int retval;
@@ -210,22 +210,22 @@ asmlinkage long sys_setgroups16(int gidsetsize, old_gid_t __user *grouplist)
 	return retval;
 }
 
-asmlinkage long sys_getuid16(void)
+SYSCALL_DEFINE0(getuid16)
 {
 	return high2lowuid(current_uid());
 }
 
-asmlinkage long sys_geteuid16(void)
+SYSCALL_DEFINE0(geteuid16)
 {
 	return high2lowuid(current_euid());
 }
 
-asmlinkage long sys_getgid16(void)
+SYSCALL_DEFINE0(getgid16)
 {
 	return high2lowgid(current_gid());
 }
 
-asmlinkage long sys_getegid16(void)
+SYSCALL_DEFINE0(getegid16)
 {
 	return high2lowgid(current_egid());
 }
-- 
GitLab


From 3cdad42884bbd95d5aa01297e8236ea1bad70053 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:22 +0100
Subject: [PATCH 337/492] [CVE-2009-0029] System call wrappers part 20

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/dcache.c     |  2 +-
 fs/namei.c      |  4 ++--
 fs/open.c       |  4 ++--
 fs/quota.c      |  3 ++-
 fs/read_write.c | 13 +++++++------
 5 files changed, 14 insertions(+), 12 deletions(-)

diff --git a/fs/dcache.c b/fs/dcache.c
index 4547f66884a..937df0fb0da 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -2092,7 +2092,7 @@ Elong:
  *		return NULL;
  *	}
  */
-asmlinkage long sys_getcwd(char __user *buf, unsigned long size)
+SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size)
 {
 	int error;
 	struct path pwd, root;
diff --git a/fs/namei.c b/fs/namei.c
index 00c4f37a039..90520f05f99 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2081,7 +2081,7 @@ out_err:
 	return error;
 }
 
-asmlinkage long sys_mkdir(const char __user *pathname, int mode)
+SYSCALL_DEFINE2(mkdir, const char __user *, pathname, int, mode)
 {
 	return sys_mkdirat(AT_FDCWD, pathname, mode);
 }
@@ -2195,7 +2195,7 @@ exit1:
 	return error;
 }
 
-asmlinkage long sys_rmdir(const char __user *pathname)
+SYSCALL_DEFINE1(rmdir, const char __user *, pathname)
 {
 	return do_rmdir(AT_FDCWD, pathname);
 }
diff --git a/fs/open.c b/fs/open.c
index 4a6d8006474..bc49e3c388d 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -522,7 +522,7 @@ SYSCALL_DEFINE2(access, const char __user *, filename, int, mode)
 	return sys_faccessat(AT_FDCWD, filename, mode);
 }
 
-asmlinkage long sys_chdir(const char __user * filename)
+SYSCALL_DEFINE1(chdir, const char __user *, filename)
 {
 	struct path path;
 	int error;
@@ -543,7 +543,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_fchdir(unsigned int fd)
+SYSCALL_DEFINE1(fchdir, unsigned int, fd)
 {
 	struct file *file;
 	struct inode *inode;
diff --git a/fs/quota.c b/fs/quota.c
index 4a8c94f05f7..d76ada914f9 100644
--- a/fs/quota.c
+++ b/fs/quota.c
@@ -371,7 +371,8 @@ static inline struct super_block *quotactl_block(const char __user *special)
  * calls. Maybe we need to add the process quotas etc. in the future,
  * but we probably should use rlimits for that.
  */
-asmlinkage long sys_quotactl(unsigned int cmd, const char __user *special, qid_t id, void __user *addr)
+SYSCALL_DEFINE4(quotactl, unsigned int, cmd, const char __user *, special,
+		qid_t, id, void __user *, addr)
 {
 	uint cmds, type;
 	struct super_block *sb = NULL;
diff --git a/fs/read_write.c b/fs/read_write.c
index fad10af59d9..400fe81c973 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -369,7 +369,7 @@ static inline void file_pos_write(struct file *file, loff_t pos)
 	file->f_pos = pos;
 }
 
-asmlinkage long sys_read(unsigned int fd, char __user * buf, size_t count)
+SYSCALL_DEFINE3(read, unsigned int, fd, char __user *, buf, size_t, count)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -386,7 +386,8 @@ asmlinkage long sys_read(unsigned int fd, char __user * buf, size_t count)
 	return ret;
 }
 
-asmlinkage long sys_write(unsigned int fd, const char __user * buf, size_t count)
+SYSCALL_DEFINE3(write, unsigned int, fd, const char __user *, buf,
+		size_t, count)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -688,8 +689,8 @@ ssize_t vfs_writev(struct file *file, const struct iovec __user *vec,
 
 EXPORT_SYMBOL(vfs_writev);
 
-asmlinkage long
-sys_readv(unsigned long fd, const struct iovec __user *vec, unsigned long vlen)
+SYSCALL_DEFINE3(readv, unsigned long, fd, const struct iovec __user *, vec,
+		unsigned long, vlen)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
@@ -709,8 +710,8 @@ sys_readv(unsigned long fd, const struct iovec __user *vec, unsigned long vlen)
 	return ret;
 }
 
-asmlinkage long
-sys_writev(unsigned long fd, const struct iovec __user *vec, unsigned long vlen)
+SYSCALL_DEFINE3(writev, unsigned long, fd, const struct iovec __user *, vec,
+		unsigned long, vlen)
 {
 	struct file *file;
 	ssize_t ret = -EBADF;
-- 
GitLab


From 20f37034fb966a1c35894f9fe529fda0b6440101 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:23 +0100
Subject: [PATCH 338/492] [CVE-2009-0029] System call wrappers part 21

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/readdir.c |  6 ++++--
 net/socket.c | 30 +++++++++++++++---------------
 2 files changed, 19 insertions(+), 17 deletions(-)

diff --git a/fs/readdir.c b/fs/readdir.c
index 8b4c2a0051a..cf6a0e39819 100644
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -187,7 +187,8 @@ efault:
 	return -EFAULT;
 }
 
-asmlinkage long sys_getdents(unsigned int fd, struct linux_dirent __user * dirent, unsigned int count)
+SYSCALL_DEFINE3(getdents, unsigned int, fd,
+		struct linux_dirent __user *, dirent, unsigned int, count)
 {
 	struct file * file;
 	struct linux_dirent __user * lastdirent;
@@ -268,7 +269,8 @@ efault:
 	return -EFAULT;
 }
 
-asmlinkage long sys_getdents64(unsigned int fd, struct linux_dirent64 __user * dirent, unsigned int count)
+SYSCALL_DEFINE3(getdents64, unsigned int, fd,
+		struct linux_dirent64 __user *, dirent, unsigned int, count)
 {
 	struct file * file;
 	struct linux_dirent64 __user * lastdirent;
diff --git a/net/socket.c b/net/socket.c
index cc9b666e58f..fdd72c586a1 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1356,7 +1356,7 @@ out_fd1:
  *	the protocol layer (having also checked the address is ok).
  */
 
-asmlinkage long sys_bind(int fd, struct sockaddr __user *umyaddr, int addrlen)
+SYSCALL_DEFINE3(bind, int, fd, struct sockaddr __user *, umyaddr, int, addrlen)
 {
 	struct socket *sock;
 	struct sockaddr_storage address;
@@ -1418,8 +1418,8 @@ asmlinkage long sys_listen(int fd, int backlog)
  *	clean when we restucture accept also.
  */
 
-asmlinkage long sys_accept4(int fd, struct sockaddr __user *upeer_sockaddr,
-			    int __user *upeer_addrlen, int flags)
+SYSCALL_DEFINE4(accept4, int, fd, struct sockaddr __user *, upeer_sockaddr,
+		int __user *, upeer_addrlen, int, flags)
 {
 	struct socket *sock, *newsock;
 	struct file *newfile;
@@ -1502,8 +1502,8 @@ out_fd:
 	goto out_put;
 }
 
-asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
-			   int __user *upeer_addrlen)
+SYSCALL_DEFINE3(accept, int, fd, struct sockaddr __user *, upeer_sockaddr,
+		int __user *, upeer_addrlen)
 {
 	return sys_accept4(fd, upeer_sockaddr, upeer_addrlen, 0);
 }
@@ -1520,8 +1520,8 @@ asmlinkage long sys_accept(int fd, struct sockaddr __user *upeer_sockaddr,
  *	include the -EINPROGRESS status for such sockets.
  */
 
-asmlinkage long sys_connect(int fd, struct sockaddr __user *uservaddr,
-			    int addrlen)
+SYSCALL_DEFINE3(connect, int, fd, struct sockaddr __user *, uservaddr,
+		int, addrlen)
 {
 	struct socket *sock;
 	struct sockaddr_storage address;
@@ -1552,8 +1552,8 @@ out:
  *	name to user space.
  */
 
-asmlinkage long sys_getsockname(int fd, struct sockaddr __user *usockaddr,
-				int __user *usockaddr_len)
+SYSCALL_DEFINE3(getsockname, int, fd, struct sockaddr __user *, usockaddr,
+		int __user *, usockaddr_len)
 {
 	struct socket *sock;
 	struct sockaddr_storage address;
@@ -1583,8 +1583,8 @@ out:
  *	name to user space.
  */
 
-asmlinkage long sys_getpeername(int fd, struct sockaddr __user *usockaddr,
-				int __user *usockaddr_len)
+SYSCALL_DEFINE3(getpeername, int, fd, struct sockaddr __user *, usockaddr,
+		int __user *, usockaddr_len)
 {
 	struct socket *sock;
 	struct sockaddr_storage address;
@@ -1725,8 +1725,8 @@ asmlinkage long sys_recv(int fd, void __user *ubuf, size_t size,
  *	to pass the user mode parameter for the protocols to sort out.
  */
 
-asmlinkage long sys_setsockopt(int fd, int level, int optname,
-			       char __user *optval, int optlen)
+SYSCALL_DEFINE5(setsockopt, int, fd, int, level, int, optname,
+		char __user *, optval, int, optlen)
 {
 	int err, fput_needed;
 	struct socket *sock;
@@ -1759,8 +1759,8 @@ out_put:
  *	to pass a user mode parameter for the protocols to sort out.
  */
 
-asmlinkage long sys_getsockopt(int fd, int level, int optname,
-			       char __user *optval, int __user *optlen)
+SYSCALL_DEFINE5(getsockopt, int, fd, int, level, int, optname,
+		char __user *, optval, int __user *, optlen)
 {
 	int err, fput_needed;
 	struct socket *sock;
-- 
GitLab


From 3e0fa65f8ba4fd24b3dcfaf14d5b15eaab0fdc61 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:24 +0100
Subject: [PATCH 339/492] [CVE-2009-0029] System call wrappers part 22

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 net/socket.c | 31 ++++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/net/socket.c b/net/socket.c
index fdd72c586a1..35dd7371752 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -1214,7 +1214,7 @@ int sock_create_kern(int family, int type, int protocol, struct socket **res)
 	return __sock_create(&init_net, family, type, protocol, res, 1);
 }
 
-asmlinkage long sys_socket(int family, int type, int protocol)
+SYSCALL_DEFINE3(socket, int, family, int, type, int, protocol)
 {
 	int retval;
 	struct socket *sock;
@@ -1255,8 +1255,8 @@ out_release:
  *	Create a pair of connected sockets.
  */
 
-asmlinkage long sys_socketpair(int family, int type, int protocol,
-			       int __user *usockvec)
+SYSCALL_DEFINE4(socketpair, int, family, int, type, int, protocol,
+		int __user *, usockvec)
 {
 	struct socket *sock1, *sock2;
 	int fd1, fd2, err;
@@ -1385,7 +1385,7 @@ SYSCALL_DEFINE3(bind, int, fd, struct sockaddr __user *, umyaddr, int, addrlen)
  *	ready for listening.
  */
 
-asmlinkage long sys_listen(int fd, int backlog)
+SYSCALL_DEFINE2(listen, int, fd, int, backlog)
 {
 	struct socket *sock;
 	int err, fput_needed;
@@ -1615,9 +1615,9 @@ SYSCALL_DEFINE3(getpeername, int, fd, struct sockaddr __user *, usockaddr,
  *	the protocol.
  */
 
-asmlinkage long sys_sendto(int fd, void __user *buff, size_t len,
-			   unsigned flags, struct sockaddr __user *addr,
-			   int addr_len)
+SYSCALL_DEFINE6(sendto, int, fd, void __user *, buff, size_t, len,
+		unsigned, flags, struct sockaddr __user *, addr,
+		int, addr_len)
 {
 	struct socket *sock;
 	struct sockaddr_storage address;
@@ -1660,7 +1660,8 @@ out:
  *	Send a datagram down a socket.
  */
 
-asmlinkage long sys_send(int fd, void __user *buff, size_t len, unsigned flags)
+SYSCALL_DEFINE4(send, int, fd, void __user *, buff, size_t, len,
+		unsigned, flags)
 {
 	return sys_sendto(fd, buff, len, flags, NULL, 0);
 }
@@ -1671,9 +1672,9 @@ asmlinkage long sys_send(int fd, void __user *buff, size_t len, unsigned flags)
  *	sender address from kernel to user space.
  */
 
-asmlinkage long sys_recvfrom(int fd, void __user *ubuf, size_t size,
-			     unsigned flags, struct sockaddr __user *addr,
-			     int __user *addr_len)
+SYSCALL_DEFINE6(recvfrom, int, fd, void __user *, ubuf, size_t, size,
+		unsigned, flags, struct sockaddr __user *, addr,
+		int __user *, addr_len)
 {
 	struct socket *sock;
 	struct iovec iov;
@@ -1815,7 +1816,7 @@ SYSCALL_DEFINE2(shutdown, int, fd, int, how)
  *	BSD sendmsg interface
  */
 
-asmlinkage long sys_sendmsg(int fd, struct msghdr __user *msg, unsigned flags)
+SYSCALL_DEFINE3(sendmsg, int, fd, struct msghdr __user *, msg, unsigned, flags)
 {
 	struct compat_msghdr __user *msg_compat =
 	    (struct compat_msghdr __user *)msg;
@@ -1921,8 +1922,8 @@ out:
  *	BSD recvmsg interface
  */
 
-asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg,
-			    unsigned int flags)
+SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
+		unsigned int, flags)
 {
 	struct compat_msghdr __user *msg_compat =
 	    (struct compat_msghdr __user *)msg;
@@ -2045,7 +2046,7 @@ static const unsigned char nargs[19]={
  *  it is set by the callees.
  */
 
-asmlinkage long sys_socketcall(int call, unsigned long __user *args)
+SYSCALL_DEFINE2(socketcall, int, call, unsigned long __user *, args)
 {
 	unsigned long a[6];
 	unsigned long a0, a1;
-- 
GitLab


From 5a8a82b1d306a325d899b67715618413657efda4 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:25 +0100
Subject: [PATCH 340/492] [CVE-2009-0029] System call wrappers part 23

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/eventpoll.c | 18 +++++++++---------
 fs/select.c    |  8 ++++----
 kernel/sys.c   |  6 +++---
 3 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 96355d50534..ba2f9ec7119 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1110,7 +1110,7 @@ retry:
 /*
  * Open an eventpoll file descriptor.
  */
-asmlinkage long sys_epoll_create1(int flags)
+SYSCALL_DEFINE1(epoll_create1, int, flags)
 {
 	int error, fd = -1;
 	struct eventpoll *ep;
@@ -1150,7 +1150,7 @@ error_return:
 	return fd;
 }
 
-asmlinkage long sys_epoll_create(int size)
+SYSCALL_DEFINE1(epoll_create, int, size)
 {
 	if (size < 0)
 		return -EINVAL;
@@ -1163,8 +1163,8 @@ asmlinkage long sys_epoll_create(int size)
  * the eventpoll file that enables the insertion/removal/change of
  * file descriptors inside the interest set.
  */
-asmlinkage long sys_epoll_ctl(int epfd, int op, int fd,
-			      struct epoll_event __user *event)
+SYSCALL_DEFINE4(epoll_ctl, int, epfd, int, op, int, fd,
+		struct epoll_event __user *, event)
 {
 	int error;
 	struct file *file, *tfile;
@@ -1261,8 +1261,8 @@ error_return:
  * Implement the event wait interface for the eventpoll file. It is the kernel
  * part of the user space epoll_wait(2).
  */
-asmlinkage long sys_epoll_wait(int epfd, struct epoll_event __user *events,
-			       int maxevents, int timeout)
+SYSCALL_DEFINE4(epoll_wait, int, epfd, struct epoll_event __user *, events,
+		int, maxevents, int, timeout)
 {
 	int error;
 	struct file *file;
@@ -1319,9 +1319,9 @@ error_return:
  * Implement the event wait interface for the eventpoll file. It is the kernel
  * part of the user space epoll_pwait(2).
  */
-asmlinkage long sys_epoll_pwait(int epfd, struct epoll_event __user *events,
-		int maxevents, int timeout, const sigset_t __user *sigmask,
-		size_t sigsetsize)
+SYSCALL_DEFINE6(epoll_pwait, int, epfd, struct epoll_event __user *, events,
+		int, maxevents, int, timeout, const sigset_t __user *, sigmask,
+		size_t, sigsetsize)
 {
 	int error;
 	sigset_t ksigmask, sigsaved;
diff --git a/fs/select.c b/fs/select.c
index d1651648be1..338f703403a 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -557,8 +557,8 @@ out_nofds:
 	return ret;
 }
 
-asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
-			fd_set __user *exp, struct timeval __user *tvp)
+SYSCALL_DEFINE5(select, int, n, fd_set __user *, inp, fd_set __user *, outp,
+		fd_set __user *, exp, struct timeval __user *, tvp)
 {
 	struct timespec end_time, *to = NULL;
 	struct timeval tv;
@@ -854,8 +854,8 @@ static long do_restart_poll(struct restart_block *restart_block)
 	return ret;
 }
 
-asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
-			long timeout_msecs)
+SYSCALL_DEFINE3(poll, struct pollfd __user *, ufds, unsigned int, nfds,
+		long, timeout_msecs)
 {
 	struct timespec end_time, *to = NULL;
 	int ret;
diff --git a/kernel/sys.c b/kernel/sys.c
index 39b192b4003..5292f2119da 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1406,7 +1406,7 @@ asmlinkage long sys_newuname(struct new_utsname __user * name)
 	return errno;
 }
 
-asmlinkage long sys_sethostname(char __user *name, int len)
+SYSCALL_DEFINE2(sethostname, char __user *, name, int, len)
 {
 	int errno;
 	char tmp[__NEW_UTS_LEN];
@@ -1430,7 +1430,7 @@ asmlinkage long sys_sethostname(char __user *name, int len)
 
 #ifdef __ARCH_WANT_SYS_GETHOSTNAME
 
-asmlinkage long sys_gethostname(char __user *name, int len)
+SYSCALL_DEFINE2(gethostname, char __user *, name, int, len)
 {
 	int i, errno;
 	struct new_utsname *u;
@@ -1455,7 +1455,7 @@ asmlinkage long sys_gethostname(char __user *name, int len)
  * Only setdomainname; getdomainname can be implemented by calling
  * uname()
  */
-asmlinkage long sys_setdomainname(char __user *name, int len)
+SYSCALL_DEFINE2(setdomainname, char __user *, name, int, len)
 {
 	int errno;
 	char tmp[__NEW_UTS_LEN];
-- 
GitLab


From e48fbb699f82ef1e80bd7126046394d2dc9ca7e6 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:26 +0100
Subject: [PATCH 341/492] [CVE-2009-0029] System call wrappers part 24

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 ipc/msg.c    | 12 ++++++------
 kernel/sys.c | 13 +++++++------
 2 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/ipc/msg.c b/ipc/msg.c
index b4eee1c6101..2ceab7f12fc 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -309,7 +309,7 @@ static inline int msg_security(struct kern_ipc_perm *ipcp, int msgflg)
 	return security_msg_queue_associate(msq, msgflg);
 }
 
-asmlinkage long sys_msgget(key_t key, int msgflg)
+SYSCALL_DEFINE2(msgget, key_t, key, int, msgflg)
 {
 	struct ipc_namespace *ns;
 	struct ipc_ops msg_ops;
@@ -466,7 +466,7 @@ out_up:
 	return err;
 }
 
-asmlinkage long sys_msgctl(int msqid, int cmd, struct msqid_ds __user *buf)
+SYSCALL_DEFINE3(msgctl, int, msqid, int, cmd, struct msqid_ds __user *, buf)
 {
 	struct msg_queue *msq;
 	int err, version;
@@ -723,8 +723,8 @@ out_free:
 	return err;
 }
 
-asmlinkage long
-sys_msgsnd(int msqid, struct msgbuf __user *msgp, size_t msgsz, int msgflg)
+SYSCALL_DEFINE4(msgsnd, int, msqid, struct msgbuf __user *, msgp, size_t, msgsz,
+		int, msgflg)
 {
 	long mtype;
 
@@ -904,8 +904,8 @@ out_unlock:
 	return msgsz;
 }
 
-asmlinkage long sys_msgrcv(int msqid, struct msgbuf __user *msgp, size_t msgsz,
-			   long msgtyp, int msgflg)
+SYSCALL_DEFINE5(msgrcv, int, msqid, struct msgbuf __user *, msgp, size_t, msgsz,
+		long, msgtyp, int, msgflg)
 {
 	long err, mtype;
 
diff --git a/kernel/sys.c b/kernel/sys.c
index 5292f2119da..70ffa8408cd 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1395,7 +1395,7 @@ EXPORT_SYMBOL(in_egroup_p);
 
 DECLARE_RWSEM(uts_sem);
 
-asmlinkage long sys_newuname(struct new_utsname __user * name)
+SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
 {
 	int errno = 0;
 
@@ -1478,7 +1478,7 @@ SYSCALL_DEFINE2(setdomainname, char __user *, name, int, len)
 	return errno;
 }
 
-asmlinkage long sys_getrlimit(unsigned int resource, struct rlimit __user *rlim)
+SYSCALL_DEFINE2(getrlimit, unsigned int, resource, struct rlimit __user *, rlim)
 {
 	if (resource >= RLIM_NLIMITS)
 		return -EINVAL;
@@ -1497,7 +1497,8 @@ asmlinkage long sys_getrlimit(unsigned int resource, struct rlimit __user *rlim)
  *	Back compatibility for getrlimit. Needed for some apps.
  */
  
-asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *rlim)
+SYSCALL_DEFINE2(old_getrlimit, unsigned int, resource,
+		struct rlimit __user *, rlim)
 {
 	struct rlimit x;
 	if (resource >= RLIM_NLIMITS)
@@ -1515,7 +1516,7 @@ asmlinkage long sys_old_getrlimit(unsigned int resource, struct rlimit __user *r
 
 #endif
 
-asmlinkage long sys_setrlimit(unsigned int resource, struct rlimit __user *rlim)
+SYSCALL_DEFINE2(setrlimit, unsigned int, resource, struct rlimit __user *, rlim)
 {
 	struct rlimit new_rlim, *old_rlim;
 	int retval;
@@ -1688,7 +1689,7 @@ int getrusage(struct task_struct *p, int who, struct rusage __user *ru)
 	return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_getrusage(int who, struct rusage __user *ru)
+SYSCALL_DEFINE2(getrusage, int, who, struct rusage __user *, ru)
 {
 	if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN &&
 	    who != RUSAGE_THREAD)
@@ -1696,7 +1697,7 @@ asmlinkage long sys_getrusage(int who, struct rusage __user *ru)
 	return getrusage(current, who, ru);
 }
 
-asmlinkage long sys_umask(int mask)
+SYSCALL_DEFINE1(umask, int, mask)
 {
 	mask = xchg(&current->fs->umask, mask & S_IRWXUGO);
 	return mask;
-- 
GitLab


From d5460c9974a321a194aded4a8c4daaac68ea8171 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:27 +0100
Subject: [PATCH 342/492] [CVE-2009-0029] System call wrappers part 25

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 ipc/mqueue.c | 6 +++---
 ipc/sem.c    | 9 +++++----
 ipc/shm.c    | 8 ++++----
 3 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 6df028b7054..faac04c85e7 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -650,8 +650,8 @@ static struct file *do_open(struct dentry *dentry, int oflag)
 	return dentry_open(dentry, mqueue_mnt, oflag, cred);
 }
 
-asmlinkage long sys_mq_open(const char __user *u_name, int oflag, mode_t mode,
-				struct mq_attr __user *u_attr)
+SYSCALL_DEFINE4(mq_open, const char __user *, u_name, int, oflag, mode_t, mode,
+		struct mq_attr __user *, u_attr)
 {
 	struct dentry *dentry;
 	struct file *filp;
@@ -721,7 +721,7 @@ out_putname:
 	return fd;
 }
 
-asmlinkage long sys_mq_unlink(const char __user *u_name)
+SYSCALL_DEFINE1(mq_unlink, const char __user *, u_name)
 {
 	int err;
 	char *name;
diff --git a/ipc/sem.c b/ipc/sem.c
index c385c40c061..16a2189e96f 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -308,7 +308,7 @@ static inline int sem_more_checks(struct kern_ipc_perm *ipcp,
 	return 0;
 }
 
-asmlinkage long sys_semget(key_t key, int nsems, int semflg)
+SYSCALL_DEFINE3(semget, key_t, key, int, nsems, int, semflg)
 {
 	struct ipc_namespace *ns;
 	struct ipc_ops sem_ops;
@@ -1055,8 +1055,8 @@ out:
 	return un;
 }
 
-asmlinkage long sys_semtimedop(int semid, struct sembuf __user *tsops,
-			unsigned nsops, const struct timespec __user *timeout)
+SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
+		unsigned, nsops, const struct timespec __user *, timeout)
 {
 	int error = -EINVAL;
 	struct sem_array *sma;
@@ -1232,7 +1232,8 @@ out_free:
 	return error;
 }
 
-asmlinkage long sys_semop (int semid, struct sembuf __user *tsops, unsigned nsops)
+SYSCALL_DEFINE3(semop, int, semid, struct sembuf __user *, tsops,
+		unsigned, nsops)
 {
 	return sys_semtimedop(semid, tsops, nsops, NULL);
 }
diff --git a/ipc/shm.c b/ipc/shm.c
index d0ab5527bf4..a9e09ad2263 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -440,7 +440,7 @@ static inline int shm_more_checks(struct kern_ipc_perm *ipcp,
 	return 0;
 }
 
-asmlinkage long sys_shmget (key_t key, size_t size, int shmflg)
+SYSCALL_DEFINE3(shmget, key_t, key, size_t, size, int, shmflg)
 {
 	struct ipc_namespace *ns;
 	struct ipc_ops shm_ops;
@@ -621,7 +621,7 @@ out_up:
 	return err;
 }
 
-asmlinkage long sys_shmctl(int shmid, int cmd, struct shmid_ds __user *buf)
+SYSCALL_DEFINE3(shmctl, int, shmid, int, cmd, struct shmid_ds __user *, buf)
 {
 	struct shmid_kernel *shp;
 	int err, version;
@@ -939,7 +939,7 @@ out_put_dentry:
 	goto out_nattch;
 }
 
-asmlinkage long sys_shmat(int shmid, char __user *shmaddr, int shmflg)
+SYSCALL_DEFINE3(shmat, int, shmid, char __user *, shmaddr, int, shmflg)
 {
 	unsigned long ret;
 	long err;
@@ -955,7 +955,7 @@ asmlinkage long sys_shmat(int shmid, char __user *shmaddr, int shmflg)
  * detach and kill segment if marked destroyed.
  * The work is done in shm_close.
  */
-asmlinkage long sys_shmdt(char __user *shmaddr)
+SYSCALL_DEFINE1(shmdt, char __user *, shmaddr)
 {
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma, *next;
-- 
GitLab


From c4ea37c26a691ad0b7e86aa5884aab27830e95c9 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:28 +0100
Subject: [PATCH 343/492] [CVE-2009-0029] System call wrappers part 26

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 drivers/pci/syscall.c | 12 ++++--------
 ipc/mqueue.c          | 22 +++++++++++-----------
 kernel/sys.c          |  4 ++--
 mm/swapfile.c         |  4 ++--
 4 files changed, 19 insertions(+), 23 deletions(-)

diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index 645d7a60e41..ec22284eed3 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -14,10 +14,8 @@
 #include <asm/uaccess.h>
 #include "pci.h"
 
-asmlinkage long
-sys_pciconfig_read(unsigned long bus, unsigned long dfn,
-		   unsigned long off, unsigned long len,
-		   void __user *buf)
+SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
+		unsigned long, off, unsigned long, len, void __user *, buf)
 {
 	struct pci_dev *dev;
 	u8 byte;
@@ -86,10 +84,8 @@ error:
 	return err;
 }
 
-asmlinkage long
-sys_pciconfig_write(unsigned long bus, unsigned long dfn,
-		    unsigned long off, unsigned long len,
-		    void __user *buf)
+SYSCALL_DEFINE5(pciconfig_write, unsigned long, bus, unsigned long, dfn,
+		unsigned long, off, unsigned long, len, void __user *, buf)
 {
 	struct pci_dev *dev;
 	u8 byte;
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index faac04c85e7..54b4077fed7 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -814,9 +814,9 @@ static inline void pipelined_receive(struct mqueue_inode_info *info)
 	sender->state = STATE_READY;
 }
 
-asmlinkage long sys_mq_timedsend(mqd_t mqdes, const char __user *u_msg_ptr,
-	size_t msg_len, unsigned int msg_prio,
-	const struct timespec __user *u_abs_timeout)
+SYSCALL_DEFINE5(mq_timedsend, mqd_t, mqdes, const char __user *, u_msg_ptr,
+		size_t, msg_len, unsigned int, msg_prio,
+		const struct timespec __user *, u_abs_timeout)
 {
 	struct file *filp;
 	struct inode *inode;
@@ -907,9 +907,9 @@ out:
 	return ret;
 }
 
-asmlinkage long sys_mq_timedreceive(mqd_t mqdes, char __user *u_msg_ptr,
-	size_t msg_len, unsigned int __user *u_msg_prio,
-	const struct timespec __user *u_abs_timeout)
+SYSCALL_DEFINE5(mq_timedreceive, mqd_t, mqdes, char __user *, u_msg_ptr,
+		size_t, msg_len, unsigned int __user *, u_msg_prio,
+		const struct timespec __user *, u_abs_timeout)
 {
 	long timeout;
 	ssize_t ret;
@@ -997,8 +997,8 @@ out:
  * and he isn't currently owner of notification, will be silently discarded.
  * It isn't explicitly defined in the POSIX.
  */
-asmlinkage long sys_mq_notify(mqd_t mqdes,
-				const struct sigevent __user *u_notification)
+SYSCALL_DEFINE2(mq_notify, mqd_t, mqdes,
+		const struct sigevent __user *, u_notification)
 {
 	int ret;
 	struct file *filp;
@@ -1123,9 +1123,9 @@ out:
 	return ret;
 }
 
-asmlinkage long sys_mq_getsetattr(mqd_t mqdes,
-			const struct mq_attr __user *u_mqstat,
-			struct mq_attr __user *u_omqstat)
+SYSCALL_DEFINE3(mq_getsetattr, mqd_t, mqdes,
+		const struct mq_attr __user *, u_mqstat,
+		struct mq_attr __user *, u_omqstat)
 {
 	int ret;
 	struct mq_attr mqstat, omqstat;
diff --git a/kernel/sys.c b/kernel/sys.c
index 70ffa8408cd..59aadcdad6c 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1703,8 +1703,8 @@ SYSCALL_DEFINE1(umask, int, mask)
 	return mask;
 }
 
-asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
-			  unsigned long arg4, unsigned long arg5)
+SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
+		unsigned long, arg4, unsigned long, arg5)
 {
 	struct task_struct *me = current;
 	unsigned char comm[sizeof(me->comm)];
diff --git a/mm/swapfile.c b/mm/swapfile.c
index da422c47e2e..f48b831e5e5 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1377,7 +1377,7 @@ out:
 	return ret;
 }
 
-asmlinkage long sys_swapoff(const char __user * specialfile)
+SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)
 {
 	struct swap_info_struct * p = NULL;
 	unsigned short *swap_map;
@@ -1633,7 +1633,7 @@ late_initcall(max_swapfiles_check);
  *
  * The swapon system call
  */
-asmlinkage long sys_swapon(const char __user * specialfile, int swap_flags)
+SYSCALL_DEFINE2(swapon, const char __user *, specialfile, int, swap_flags)
 {
 	struct swap_info_struct * p;
 	char *name = NULL;
-- 
GitLab


From 1e7bfb2134dfec37ce04fb3a4ca89299e892d10c Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:29 +0100
Subject: [PATCH 344/492] [CVE-2009-0029] System call wrappers part 27

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/exec.c              |  2 +-
 fs/filesystems.c       |  2 +-
 fs/nfsctl.c            |  4 ++--
 kernel/printk.c        |  2 +-
 kernel/ptrace.c        |  2 +-
 kernel/sysctl.c        |  4 ++--
 kernel/timer.c         |  2 +-
 security/keys/keyctl.c | 18 +++++++++---------
 8 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/fs/exec.c b/fs/exec.c
index 71a6efe5d8b..0dd60a01f1b 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -99,7 +99,7 @@ static inline void put_binfmt(struct linux_binfmt * fmt)
  *
  * Also note that we take the address to load from from the file itself.
  */
-asmlinkage long sys_uselib(const char __user * library)
+SYSCALL_DEFINE1(uselib, const char __user *, library)
 {
 	struct file *file;
 	struct nameidata nd;
diff --git a/fs/filesystems.c b/fs/filesystems.c
index d488dcd7f2b..1aa70260e6d 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -179,7 +179,7 @@ static int fs_maxindex(void)
 /*
  * Whee.. Weird sysv syscall. 
  */
-asmlinkage long sys_sysfs(int option, unsigned long arg1, unsigned long arg2)
+SYSCALL_DEFINE3(sysfs, int, option, unsigned long, arg1, unsigned long, arg2)
 {
 	int retval = -EINVAL;
 
diff --git a/fs/nfsctl.c b/fs/nfsctl.c
index b27451909df..8f9a20556f7 100644
--- a/fs/nfsctl.c
+++ b/fs/nfsctl.c
@@ -86,8 +86,8 @@ static struct {
 	},
 };
 
-long
-asmlinkage sys_nfsservctl(int cmd, struct nfsctl_arg __user *arg, void __user *res)
+SYSCALL_DEFINE3(nfsservctl, int, cmd, struct nfsctl_arg __user *, arg,
+		void __user *, res)
 {
 	struct file *file;
 	void __user *p = &arg->u;
diff --git a/kernel/printk.c b/kernel/printk.c
index e48cf33783f..69188f226a9 100644
--- a/kernel/printk.c
+++ b/kernel/printk.c
@@ -382,7 +382,7 @@ out:
 	return error;
 }
 
-asmlinkage long sys_syslog(int type, char __user *buf, int len)
+SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
 {
 	return do_syslog(type, buf, len);
 }
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 29dc700e198..c9cf48b21f0 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -574,7 +574,7 @@ struct task_struct *ptrace_get_task_struct(pid_t pid)
 #define arch_ptrace_attach(child)	do { } while (0)
 #endif
 
-asmlinkage long sys_ptrace(long request, long pid, long addr, long data)
+SYSCALL_DEFINE4(ptrace, long, request, long, pid, long, addr, long, data)
 {
 	struct task_struct *child;
 	long ret;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 89d74436318..3e38b74b612 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1688,7 +1688,7 @@ int do_sysctl(int __user *name, int nlen, void __user *oldval, size_t __user *ol
 	return error;
 }
 
-asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
+SYSCALL_DEFINE1(sysctl, struct __sysctl_args __user *, args)
 {
 	struct __sysctl_args tmp;
 	int error;
@@ -2989,7 +2989,7 @@ int sysctl_ms_jiffies(struct ctl_table *table,
 #else /* CONFIG_SYSCTL_SYSCALL */
 
 
-asmlinkage long sys_sysctl(struct __sysctl_args __user *args)
+SYSCALL_DEFINE1(sysctl, struct __sysctl_args __user *, args)
 {
 	struct __sysctl_args tmp;
 	int error;
diff --git a/kernel/timer.c b/kernel/timer.c
index 14a51530a4c..13dd64fe143 100644
--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -1400,7 +1400,7 @@ out:
 	return 0;
 }
 
-asmlinkage long sys_sysinfo(struct sysinfo __user *info)
+SYSCALL_DEFINE1(sysinfo, struct sysinfo __user *, info)
 {
 	struct sysinfo val;
 
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 09796797d12..070a53eab80 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -54,11 +54,11 @@ static int key_get_type_from_user(char *type,
  * - returns the new key's serial number
  * - implements add_key()
  */
-asmlinkage long sys_add_key(const char __user *_type,
-			    const char __user *_description,
-			    const void __user *_payload,
-			    size_t plen,
-			    key_serial_t ringid)
+SYSCALL_DEFINE5(add_key, const char __user *, _type,
+		const char __user *, _description,
+		const void __user *, _payload,
+		size_t, plen,
+		key_serial_t, ringid)
 {
 	key_ref_t keyring_ref, key_ref;
 	char type[32], *description;
@@ -146,10 +146,10 @@ asmlinkage long sys_add_key(const char __user *_type,
  *   - if the _callout_info string is empty, it will be rendered as "-"
  * - implements request_key()
  */
-asmlinkage long sys_request_key(const char __user *_type,
-				const char __user *_description,
-				const char __user *_callout_info,
-				key_serial_t destringid)
+SYSCALL_DEFINE4(request_key, const char __user *, _type,
+		const char __user *, _description,
+		const char __user *, _callout_info,
+		key_serial_t, destringid)
 {
 	struct key_type *ktype;
 	struct key *key;
-- 
GitLab


From 938bb9f5e840eddbf54e4f62f6c5ba9b3ae12c9d Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:30 +0100
Subject: [PATCH 345/492] [CVE-2009-0029] System call wrappers part 28

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/ioprio.c                      |  5 ++---
 fs/notify/inotify/inotify_user.c |  4 ++--
 mm/mempolicy.c                   | 24 +++++++++++-------------
 mm/migrate.c                     |  8 ++++----
 security/keys/keyctl.c           |  4 ++--
 5 files changed, 21 insertions(+), 24 deletions(-)

diff --git a/fs/ioprio.c b/fs/ioprio.c
index 1a39ac37094..c7c0b28d7d2 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -72,7 +72,7 @@ int set_task_ioprio(struct task_struct *task, int ioprio)
 }
 EXPORT_SYMBOL_GPL(set_task_ioprio);
 
-asmlinkage long sys_ioprio_set(int which, int who, int ioprio)
+SYSCALL_DEFINE3(ioprio_set, int, which, int, who, int, ioprio)
 {
 	int class = IOPRIO_PRIO_CLASS(ioprio);
 	int data = IOPRIO_PRIO_DATA(ioprio);
@@ -188,7 +188,7 @@ int ioprio_best(unsigned short aprio, unsigned short bprio)
 		return aprio;
 }
 
-asmlinkage long sys_ioprio_get(int which, int who)
+SYSCALL_DEFINE2(ioprio_get, int, which, int, who)
 {
 	struct task_struct *g, *p;
 	struct user_struct *user;
@@ -252,4 +252,3 @@ asmlinkage long sys_ioprio_get(int which, int who)
 	read_unlock(&tasklist_lock);
 	return ret;
 }
-
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index 81b8644b013..efef1ffca77 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -576,7 +576,7 @@ static const struct inotify_operations inotify_user_ops = {
 	.destroy_watch	= free_inotify_user_watch,
 };
 
-asmlinkage long sys_inotify_init1(int flags)
+SYSCALL_DEFINE1(inotify_init1, int, flags)
 {
 	struct inotify_device *dev;
 	struct inotify_handle *ih;
@@ -655,7 +655,7 @@ out_put_fd:
 	return ret;
 }
 
-asmlinkage long sys_inotify_init(void)
+SYSCALL_DEFINE0(inotify_init)
 {
 	return sys_inotify_init1(0);
 }
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index e412ffa8e52..3eb4a6fdc04 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1068,10 +1068,9 @@ static int copy_nodes_to_user(unsigned long __user *mask, unsigned long maxnode,
 	return copy_to_user(mask, nodes_addr(*nodes), copy) ? -EFAULT : 0;
 }
 
-asmlinkage long sys_mbind(unsigned long start, unsigned long len,
-			unsigned long mode,
-			unsigned long __user *nmask, unsigned long maxnode,
-			unsigned flags)
+SYSCALL_DEFINE6(mbind, unsigned long, start, unsigned long, len,
+		unsigned long, mode, unsigned long __user *, nmask,
+		unsigned long, maxnode, unsigned, flags)
 {
 	nodemask_t nodes;
 	int err;
@@ -1091,8 +1090,8 @@ asmlinkage long sys_mbind(unsigned long start, unsigned long len,
 }
 
 /* Set the process memory policy */
-asmlinkage long sys_set_mempolicy(int mode, unsigned long __user *nmask,
-		unsigned long maxnode)
+SYSCALL_DEFINE3(set_mempolicy, int, mode, unsigned long __user *, nmask,
+		unsigned long, maxnode)
 {
 	int err;
 	nodemask_t nodes;
@@ -1110,9 +1109,9 @@ asmlinkage long sys_set_mempolicy(int mode, unsigned long __user *nmask,
 	return do_set_mempolicy(mode, flags, &nodes);
 }
 
-asmlinkage long sys_migrate_pages(pid_t pid, unsigned long maxnode,
-		const unsigned long __user *old_nodes,
-		const unsigned long __user *new_nodes)
+SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode,
+		const unsigned long __user *, old_nodes,
+		const unsigned long __user *, new_nodes)
 {
 	const struct cred *cred = current_cred(), *tcred;
 	struct mm_struct *mm;
@@ -1185,10 +1184,9 @@ out:
 
 
 /* Retrieve NUMA policy */
-asmlinkage long sys_get_mempolicy(int __user *policy,
-				unsigned long __user *nmask,
-				unsigned long maxnode,
-				unsigned long addr, unsigned long flags)
+SYSCALL_DEFINE5(get_mempolicy, int __user *, policy,
+		unsigned long __user *, nmask, unsigned long, maxnode,
+		unsigned long, addr, unsigned long, flags)
 {
 	int err;
 	int uninitialized_var(pval);
diff --git a/mm/migrate.c b/mm/migrate.c
index a30ea5fcf9f..2bb4e1d6352 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -1055,10 +1055,10 @@ out:
  * Move a list of pages in the address space of the currently executing
  * process.
  */
-asmlinkage long sys_move_pages(pid_t pid, unsigned long nr_pages,
-			const void __user * __user *pages,
-			const int __user *nodes,
-			int __user *status, int flags)
+SYSCALL_DEFINE6(move_pages, pid_t, pid, unsigned long, nr_pages,
+		const void __user * __user *, pages,
+		const int __user *, nodes,
+		int __user *, status, int, flags)
 {
 	const struct cred *cred = current_cred(), *tcred;
 	struct task_struct *task;
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c
index 070a53eab80..e9335e1c6cf 100644
--- a/security/keys/keyctl.c
+++ b/security/keys/keyctl.c
@@ -1216,8 +1216,8 @@ long keyctl_get_security(key_serial_t keyid,
 /*
  * the key control system call
  */
-asmlinkage long sys_keyctl(int option, unsigned long arg2, unsigned long arg3,
-			   unsigned long arg4, unsigned long arg5)
+SYSCALL_DEFINE5(keyctl, int, option, unsigned long, arg2, unsigned long, arg3,
+		unsigned long, arg4, unsigned long, arg5)
 {
 	switch (option) {
 	case KEYCTL_GET_KEYRING_ID:
-- 
GitLab


From 2e4d0924eb0c403ce4014fa139d1d61bf2c44fee Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:31 +0100
Subject: [PATCH 346/492] [CVE-2009-0029] System call wrappers part 29

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/namei.c                       | 21 ++++++++++-----------
 fs/notify/inotify/inotify_user.c |  5 +++--
 2 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/fs/namei.c b/fs/namei.c
index 90520f05f99..bbc15c23755 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1962,8 +1962,8 @@ static int may_mknod(mode_t mode)
 	}
 }
 
-asmlinkage long sys_mknodat(int dfd, const char __user *filename, int mode,
-				unsigned dev)
+SYSCALL_DEFINE4(mknodat, int, dfd, const char __user *, filename, int, mode,
+		unsigned, dev)
 {
 	int error;
 	char *tmp;
@@ -2044,7 +2044,7 @@ int vfs_mkdir(struct inode *dir, struct dentry *dentry, int mode)
 	return error;
 }
 
-asmlinkage long sys_mkdirat(int dfd, const char __user *pathname, int mode)
+SYSCALL_DEFINE3(mkdirat, int, dfd, const char __user *, pathname, int, mode)
 {
 	int error = 0;
 	char * tmp;
@@ -2291,7 +2291,7 @@ slashes:
 	goto exit2;
 }
 
-asmlinkage long sys_unlinkat(int dfd, const char __user *pathname, int flag)
+SYSCALL_DEFINE3(unlinkat, int, dfd, const char __user *, pathname, int, flag)
 {
 	if ((flag & ~AT_REMOVEDIR) != 0)
 		return -EINVAL;
@@ -2328,8 +2328,8 @@ int vfs_symlink(struct inode *dir, struct dentry *dentry, const char *oldname)
 	return error;
 }
 
-asmlinkage long sys_symlinkat(const char __user *oldname,
-			      int newdfd, const char __user *newname)
+SYSCALL_DEFINE3(symlinkat, const char __user *, oldname,
+		int, newdfd, const char __user *, newname)
 {
 	int error;
 	char *from;
@@ -2422,9 +2422,8 @@ int vfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *new_de
  * with linux 2.0, and to avoid hard-linking to directories
  * and other special files.  --ADM
  */
-asmlinkage long sys_linkat(int olddfd, const char __user *oldname,
-			   int newdfd, const char __user *newname,
-			   int flags)
+SYSCALL_DEFINE5(linkat, int, olddfd, const char __user *, oldname,
+		int, newdfd, const char __user *, newname, int, flags)
 {
 	struct dentry *new_dentry;
 	struct nameidata nd;
@@ -2624,8 +2623,8 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 	return error;
 }
 
-asmlinkage long sys_renameat(int olddfd, const char __user *oldname,
-			     int newdfd, const char __user *newname)
+SYSCALL_DEFINE4(renameat, int, olddfd, const char __user *, oldname,
+		int, newdfd, const char __user *, newname)
 {
 	struct dentry *old_dir, *new_dir;
 	struct dentry *old_dentry, *new_dentry;
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index efef1ffca77..d53a1838d6e 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -660,7 +660,8 @@ SYSCALL_DEFINE0(inotify_init)
 	return sys_inotify_init1(0);
 }
 
-asmlinkage long sys_inotify_add_watch(int fd, const char __user *pathname, u32 mask)
+SYSCALL_DEFINE3(inotify_add_watch, int, fd, const char __user *, pathname,
+		u32, mask)
 {
 	struct inode *inode;
 	struct inotify_device *dev;
@@ -704,7 +705,7 @@ fput_and_out:
 	return ret;
 }
 
-asmlinkage long sys_inotify_rm_watch(int fd, __s32 wd)
+SYSCALL_DEFINE2(inotify_rm_watch, int, fd, __s32, wd)
 {
 	struct file *filp;
 	struct inotify_device *dev;
-- 
GitLab


From 6559eed8ca7db0531a207cd80be5e28cd6f213c5 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:32 +0100
Subject: [PATCH 347/492] [CVE-2009-0029] System call wrappers part 30

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/open.c     | 13 ++++++-------
 fs/stat.c     | 12 ++++++------
 fs/utimes.c   |  6 ++++--
 kernel/fork.c |  2 +-
 4 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/fs/open.c b/fs/open.c
index bc49e3c388d..a3a78ceb2a2 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -447,7 +447,7 @@ SYSCALL_ALIAS(sys_fallocate, SyS_fallocate);
  * We do this by temporarily clearing all FS-related capabilities and
  * switching the fsuid/fsgid around to the real ones.
  */
-asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode)
+SYSCALL_DEFINE3(faccessat, int, dfd, const char __user *, filename, int, mode)
 {
 	const struct cred *old_cred;
 	struct cred *override_cred;
@@ -628,8 +628,7 @@ out:
 	return err;
 }
 
-asmlinkage long sys_fchmodat(int dfd, const char __user *filename,
-			     mode_t mode)
+SYSCALL_DEFINE3(fchmodat, int, dfd, const char __user *, filename, mode_t, mode)
 {
 	struct path path;
 	struct inode *inode;
@@ -707,8 +706,8 @@ out:
 	return error;
 }
 
-asmlinkage long sys_fchownat(int dfd, const char __user *filename, uid_t user,
-			     gid_t group, int flag)
+SYSCALL_DEFINE5(fchownat, int, dfd, const char __user *, filename, uid_t, user,
+		gid_t, group, int, flag)
 {
 	struct path path;
 	int error = -EINVAL;
@@ -1060,8 +1059,8 @@ SYSCALL_DEFINE3(open, const char __user *, filename, int, flags, int, mode)
 	return ret;
 }
 
-asmlinkage long sys_openat(int dfd, const char __user *filename, int flags,
-			   int mode)
+SYSCALL_DEFINE4(openat, int, dfd, const char __user *, filename, int, flags,
+		int, mode)
 {
 	long ret;
 
diff --git a/fs/stat.c b/fs/stat.c
index d712a0dfb50..2db740a0cfb 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -260,8 +260,8 @@ SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf
 }
 
 #if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
-asmlinkage long sys_newfstatat(int dfd, char __user *filename,
-				struct stat __user *statbuf, int flag)
+SYSCALL_DEFINE4(newfstatat, int, dfd, char __user *, filename,
+		struct stat __user *, statbuf, int, flag)
 {
 	struct kstat stat;
 	int error = -EINVAL;
@@ -293,8 +293,8 @@ SYSCALL_DEFINE2(newfstat, unsigned int, fd, struct stat __user *, statbuf)
 	return error;
 }
 
-asmlinkage long sys_readlinkat(int dfd, const char __user *pathname,
-				char __user *buf, int bufsiz)
+SYSCALL_DEFINE4(readlinkat, int, dfd, const char __user *, pathname,
+		char __user *, buf, int, bufsiz)
 {
 	struct path path;
 	int error;
@@ -400,8 +400,8 @@ SYSCALL_DEFINE2(fstat64, unsigned long, fd, struct stat64 __user *, statbuf)
 	return error;
 }
 
-asmlinkage long sys_fstatat64(int dfd, char __user *filename,
-			       struct stat64 __user *statbuf, int flag)
+SYSCALL_DEFINE4(fstatat64, int, dfd, char __user *, filename,
+		struct stat64 __user *, statbuf, int, flag)
 {
 	struct kstat stat;
 	int error = -EINVAL;
diff --git a/fs/utimes.c b/fs/utimes.c
index ee853615798..e4c75db5d37 100644
--- a/fs/utimes.c
+++ b/fs/utimes.c
@@ -170,7 +170,8 @@ out:
 	return error;
 }
 
-asmlinkage long sys_utimensat(int dfd, char __user *filename, struct timespec __user *utimes, int flags)
+SYSCALL_DEFINE4(utimensat, int, dfd, char __user *, filename,
+		struct timespec __user *, utimes, int, flags)
 {
 	struct timespec tstimes[2];
 
@@ -187,7 +188,8 @@ asmlinkage long sys_utimensat(int dfd, char __user *filename, struct timespec __
 	return do_utimes(dfd, filename, utimes ? tstimes : NULL, flags);
 }
 
-asmlinkage long sys_futimesat(int dfd, char __user *filename, struct timeval __user *utimes)
+SYSCALL_DEFINE3(futimesat, int, dfd, char __user *, filename,
+		struct timeval __user *, utimes)
 {
 	struct timeval times[2];
 	struct timespec tstimes[2];
diff --git a/kernel/fork.c b/kernel/fork.c
index 8eb37d38c6a..bf0cef8bbdf 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1603,7 +1603,7 @@ static int unshare_fd(unsigned long unshare_flags, struct files_struct **new_fdp
  * constructed. Here we are modifying the current, active,
  * task_struct.
  */
-asmlinkage long sys_unshare(unsigned long unshare_flags)
+SYSCALL_DEFINE1(unshare, unsigned long, unshare_flags)
 {
 	int err = 0;
 	struct fs_struct *fs, *new_fs = NULL;
-- 
GitLab


From 836f92adf121f806e9beb5b6b88bd5c9c4ea3f24 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:33 +0100
Subject: [PATCH 348/492] [CVE-2009-0029] System call wrappers part 31

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/signalfd.c  |  8 ++++----
 fs/splice.c    | 12 ++++++------
 fs/timerfd.c   |  8 ++++----
 kernel/futex.c | 11 +++++------
 kernel/sys.c   |  4 ++--
 5 files changed, 21 insertions(+), 22 deletions(-)

diff --git a/fs/signalfd.c b/fs/signalfd.c
index 9c39bc7f843..b07565c9438 100644
--- a/fs/signalfd.c
+++ b/fs/signalfd.c
@@ -205,8 +205,8 @@ static const struct file_operations signalfd_fops = {
 	.read		= signalfd_read,
 };
 
-asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask,
-			      size_t sizemask, int flags)
+SYSCALL_DEFINE4(signalfd4, int, ufd, sigset_t __user *, user_mask,
+		size_t, sizemask, int, flags)
 {
 	sigset_t sigmask;
 	struct signalfd_ctx *ctx;
@@ -259,8 +259,8 @@ asmlinkage long sys_signalfd4(int ufd, sigset_t __user *user_mask,
 	return ufd;
 }
 
-asmlinkage long sys_signalfd(int ufd, sigset_t __user *user_mask,
-			     size_t sizemask)
+SYSCALL_DEFINE3(signalfd, int, ufd, sigset_t __user *, user_mask,
+		size_t, sizemask)
 {
 	return sys_signalfd4(ufd, user_mask, sizemask, 0);
 }
diff --git a/fs/splice.c b/fs/splice.c
index a54b3e3f10a..4ed0ba44a96 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -1435,8 +1435,8 @@ static long vmsplice_to_pipe(struct file *file, const struct iovec __user *iov,
  * Currently we punt and implement it as a normal copy, see pipe_to_user().
  *
  */
-asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
-			     unsigned long nr_segs, unsigned int flags)
+SYSCALL_DEFINE4(vmsplice, int, fd, const struct iovec __user *, iov,
+		unsigned long, nr_segs, unsigned int, flags)
 {
 	struct file *file;
 	long error;
@@ -1461,9 +1461,9 @@ asmlinkage long sys_vmsplice(int fd, const struct iovec __user *iov,
 	return error;
 }
 
-asmlinkage long sys_splice(int fd_in, loff_t __user *off_in,
-			   int fd_out, loff_t __user *off_out,
-			   size_t len, unsigned int flags)
+SYSCALL_DEFINE6(splice, int, fd_in, loff_t __user *, off_in,
+		int, fd_out, loff_t __user *, off_out,
+		size_t, len, unsigned int, flags)
 {
 	long error;
 	struct file *in, *out;
@@ -1685,7 +1685,7 @@ static long do_tee(struct file *in, struct file *out, size_t len,
 	return ret;
 }
 
-asmlinkage long sys_tee(int fdin, int fdout, size_t len, unsigned int flags)
+SYSCALL_DEFINE4(tee, int, fdin, int, fdout, size_t, len, unsigned int, flags)
 {
 	struct file *in;
 	int error, fput_in;
diff --git a/fs/timerfd.c b/fs/timerfd.c
index 0862f0e49d0..c8c14f58b96 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -177,7 +177,7 @@ static struct file *timerfd_fget(int fd)
 	return file;
 }
 
-asmlinkage long sys_timerfd_create(int clockid, int flags)
+SYSCALL_DEFINE2(timerfd_create, int, clockid, int, flags)
 {
 	int ufd;
 	struct timerfd_ctx *ctx;
@@ -208,9 +208,9 @@ asmlinkage long sys_timerfd_create(int clockid, int flags)
 	return ufd;
 }
 
-asmlinkage long sys_timerfd_settime(int ufd, int flags,
-				    const struct itimerspec __user *utmr,
-				    struct itimerspec __user *otmr)
+SYSCALL_DEFINE4(timerfd_settime, int, ufd, int, flags,
+		const struct itimerspec __user *, utmr,
+		struct itimerspec __user *, otmr)
 {
 	struct file *file;
 	struct timerfd_ctx *ctx;
diff --git a/kernel/futex.c b/kernel/futex.c
index e86931d8d4e..f89d373a9c6 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -1733,9 +1733,8 @@ pi_faulted:
  * @head: pointer to the list-head
  * @len: length of the list-head, as userspace expects
  */
-asmlinkage long
-sys_set_robust_list(struct robust_list_head __user *head,
-		    size_t len)
+SYSCALL_DEFINE2(set_robust_list, struct robust_list_head __user *, head,
+		size_t, len)
 {
 	if (!futex_cmpxchg_enabled)
 		return -ENOSYS;
@@ -1756,9 +1755,9 @@ sys_set_robust_list(struct robust_list_head __user *head,
  * @head_ptr: pointer to a list-head pointer, the kernel fills it in
  * @len_ptr: pointer to a length field, the kernel fills in the header size
  */
-asmlinkage long
-sys_get_robust_list(int pid, struct robust_list_head __user * __user *head_ptr,
-		    size_t __user *len_ptr)
+SYSCALL_DEFINE3(get_robust_list, int, pid,
+		struct robust_list_head __user * __user *, head_ptr,
+		size_t __user *, len_ptr)
 {
 	struct robust_list_head __user *head;
 	unsigned long ret;
diff --git a/kernel/sys.c b/kernel/sys.c
index 59aadcdad6c..e7dc0e10a48 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1817,8 +1817,8 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3,
 	return error;
 }
 
-asmlinkage long sys_getcpu(unsigned __user *cpup, unsigned __user *nodep,
-			   struct getcpu_cache __user *unused)
+SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep,
+		struct getcpu_cache __user *, unused)
 {
 	int err = 0;
 	int cpu = raw_smp_processor_id();
-- 
GitLab


From d4e82042c4cfa87a7d51710b71f568fe80132551 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:34 +0100
Subject: [PATCH 349/492] [CVE-2009-0029] System call wrappers part 32

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/eventfd.c             |  5 ++---
 fs/pipe.c                |  2 +-
 fs/readdir.c             |  3 ++-
 fs/select.c              | 11 ++++++-----
 fs/timerfd.c             |  2 +-
 include/linux/syscalls.h |  7 +++++++
 kernel/signal.c          | 11 +++++------
 7 files changed, 24 insertions(+), 17 deletions(-)

diff --git a/fs/eventfd.c b/fs/eventfd.c
index 08bf558d040..5de2c2db3aa 100644
--- a/fs/eventfd.c
+++ b/fs/eventfd.c
@@ -198,7 +198,7 @@ struct file *eventfd_fget(int fd)
 	return file;
 }
 
-asmlinkage long sys_eventfd2(unsigned int count, int flags)
+SYSCALL_DEFINE2(eventfd2, unsigned int, count, int, flags)
 {
 	int fd;
 	struct eventfd_ctx *ctx;
@@ -228,8 +228,7 @@ asmlinkage long sys_eventfd2(unsigned int count, int flags)
 	return fd;
 }
 
-asmlinkage long sys_eventfd(unsigned int count)
+SYSCALL_DEFINE1(eventfd, unsigned int, count)
 {
 	return sys_eventfd2(count, 0);
 }
-
diff --git a/fs/pipe.c b/fs/pipe.c
index 0c64db86c91..b89c878588a 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1043,7 +1043,7 @@ int do_pipe(int *fd)
  * sys_pipe() is the normal C calling standard for creating
  * a pipe. It's not the way Unix traditionally does this, though.
  */
-asmlinkage long sys_pipe2(int __user *fildes, int flags)
+SYSCALL_DEFINE2(pipe2, int __user *, fildes, int, flags)
 {
 	int fd[2];
 	int error;
diff --git a/fs/readdir.c b/fs/readdir.c
index cf6a0e39819..7723401f8d8 100644
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -102,7 +102,8 @@ efault:
 	return -EFAULT;
 }
 
-asmlinkage long sys_old_readdir(unsigned int fd, struct old_linux_dirent __user * dirent, unsigned int count)
+SYSCALL_DEFINE3(old_readdir, unsigned int, fd,
+		struct old_linux_dirent __user *, dirent, unsigned int, count)
 {
 	int error;
 	struct file * file;
diff --git a/fs/select.c b/fs/select.c
index 338f703403a..0fe0e1469df 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -636,8 +636,9 @@ static long do_pselect(int n, fd_set __user *inp, fd_set __user *outp,
  * which has a pointer to the sigset_t itself followed by a size_t containing
  * the sigset size.
  */
-asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp,
-	fd_set __user *exp, struct timespec __user *tsp, void __user *sig)
+SYSCALL_DEFINE6(pselect6, int, n, fd_set __user *, inp, fd_set __user *, outp,
+		fd_set __user *, exp, struct timespec __user *, tsp,
+		void __user *, sig)
 {
 	size_t sigsetsize = 0;
 	sigset_t __user *up = NULL;
@@ -889,9 +890,9 @@ SYSCALL_DEFINE3(poll, struct pollfd __user *, ufds, unsigned int, nfds,
 }
 
 #ifdef HAVE_SET_RESTORE_SIGMASK
-asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
-	struct timespec __user *tsp, const sigset_t __user *sigmask,
-	size_t sigsetsize)
+SYSCALL_DEFINE5(ppoll, struct pollfd __user *, ufds, unsigned int, nfds,
+		struct timespec __user *, tsp, const sigset_t __user *, sigmask,
+		size_t, sigsetsize)
 {
 	sigset_t ksigmask, sigsaved;
 	struct timespec ts, end_time, *to = NULL;
diff --git a/fs/timerfd.c b/fs/timerfd.c
index c8c14f58b96..6a123b8ff3f 100644
--- a/fs/timerfd.c
+++ b/fs/timerfd.c
@@ -265,7 +265,7 @@ SYSCALL_DEFINE4(timerfd_settime, int, ufd, int, flags,
 	return 0;
 }
 
-asmlinkage long sys_timerfd_gettime(int ufd, struct itimerspec __user *otmr)
+SYSCALL_DEFINE2(timerfd_gettime, int, ufd, struct itimerspec __user *, otmr)
 {
 	struct file *file;
 	struct timerfd_ctx *ctx;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 90aa5eba87a..56c400138b0 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -678,6 +678,13 @@ asmlinkage long sys_eventfd(unsigned int count);
 asmlinkage long sys_eventfd2(unsigned int count, int flags);
 asmlinkage long sys_fallocate(int fd, int mode, loff_t offset, loff_t len);
 asmlinkage long sys_old_readdir(unsigned int, struct old_linux_dirent __user *, unsigned int);
+asmlinkage long sys_pselect6(int, fd_set __user *, fd_set __user *,
+			     fd_set __user *, struct timespec __user *,
+			     void __user *);
+asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
+			  struct timespec __user *, const sigset_t __user *,
+			  size_t);
+asmlinkage long sys_pipe2(int __user *, int);
 
 int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
 
diff --git a/kernel/signal.c b/kernel/signal.c
index e2333929611..e73759783dc 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -2491,11 +2491,10 @@ out:
 #endif /* __ARCH_WANT_SYS_SIGPROCMASK */
 
 #ifdef __ARCH_WANT_SYS_RT_SIGACTION
-asmlinkage long
-sys_rt_sigaction(int sig,
-		 const struct sigaction __user *act,
-		 struct sigaction __user *oact,
-		 size_t sigsetsize)
+SYSCALL_DEFINE4(rt_sigaction, int, sig,
+		const struct sigaction __user *, act,
+		struct sigaction __user *, oact,
+		size_t, sigsetsize)
 {
 	struct k_sigaction new_sa, old_sa;
 	int ret = -EINVAL;
@@ -2578,7 +2577,7 @@ SYSCALL_DEFINE0(pause)
 #endif
 
 #ifdef __ARCH_WANT_SYS_RT_SIGSUSPEND
-asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize)
+SYSCALL_DEFINE2(rt_sigsuspend, sigset_t __user *, unewset, size_t, sigsetsize)
 {
 	sigset_t newset;
 
-- 
GitLab


From 2b66421995d2e93c9d1a0111acf2581f8529c6e5 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:35 +0100
Subject: [PATCH 350/492] [CVE-2009-0029] System call wrappers part 33

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 fs/pipe.c                | 2 +-
 include/linux/syscalls.h | 1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/pipe.c b/fs/pipe.c
index b89c878588a..3a48ba5179d 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -1059,7 +1059,7 @@ SYSCALL_DEFINE2(pipe2, int __user *, fildes, int, flags)
 	return error;
 }
 
-asmlinkage long sys_pipe(int __user *fildes)
+SYSCALL_DEFINE1(pipe, int __user *, fildes)
 {
 	return sys_pipe2(fildes, 0);
 }
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 56c400138b0..16875f89e6a 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -685,6 +685,7 @@ asmlinkage long sys_ppoll(struct pollfd __user *, unsigned int,
 			  struct timespec __user *, const sigset_t __user *,
 			  size_t);
 asmlinkage long sys_pipe2(int __user *, int);
+asmlinkage long sys_pipe(int __user *);
 
 int kernel_execve(const char *filename, char *const argv[], char *const envp[]);
 
-- 
GitLab


From 26689452f5ca201add63b1b1ff0dbcf82d6885e7 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Wed, 14 Jan 2009 14:14:36 +0100
Subject: [PATCH 351/492] [CVE-2009-0029] s390 specific system call wrappers

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
---
 arch/s390/kernel/compat_wrapper.S |  4 ++--
 arch/s390/kernel/entry.h          | 15 ++++++-------
 arch/s390/kernel/process.c        |  9 ++++----
 arch/s390/kernel/signal.c         | 19 +++++++----------
 arch/s390/kernel/sys_s390.c       | 35 ++++++++++++++++++-------------
 arch/s390/kernel/syscalls.S       | 12 +++++------
 6 files changed, 50 insertions(+), 44 deletions(-)

diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index fc2c97197a5..6035cd20c7a 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -547,7 +547,7 @@ sys32_setdomainname_wrapper:
 	.globl	sys32_newuname_wrapper
 sys32_newuname_wrapper:
 	llgtr	%r2,%r2			# struct new_utsname *
-	jg	s390x_newuname		# branch to system call
+	jg	sys_s390_newuname	# branch to system call
 
 	.globl	compat_sys_adjtimex_wrapper
 compat_sys_adjtimex_wrapper:
@@ -615,7 +615,7 @@ sys32_sysfs_wrapper:
 	.globl	sys32_personality_wrapper
 sys32_personality_wrapper:
 	llgfr	%r2,%r2			# unsigned long
-	jg	s390x_personality	# branch to system call
+	jg	sys_s390_personality	# branch to system call
 
 	.globl	sys32_setfsuid16_wrapper
 sys32_setfsuid16_wrapper:
diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h
index 5c9b5b37004..950c59c6688 100644
--- a/arch/s390/kernel/entry.h
+++ b/arch/s390/kernel/entry.h
@@ -31,21 +31,22 @@ struct old_sigaction;
 struct sel_arg_struct;
 
 long sys_mmap2(struct mmap_arg_struct __user  *arg);
-long old_mmap(struct mmap_arg_struct __user *arg);
+long sys_s390_old_mmap(struct mmap_arg_struct __user *arg);
 long sys_ipc(uint call, int first, unsigned long second,
 	     unsigned long third, void __user *ptr);
-long s390x_newuname(struct new_utsname __user *name);
-long s390x_personality(unsigned long personality);
-long s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
+long sys_s390_newuname(struct new_utsname __user *name);
+long sys_s390_personality(unsigned long personality);
+long sys_s390_fadvise64(int fd, u32 offset_high, u32 offset_low,
 		    size_t len, int advice);
-long s390_fadvise64_64(struct fadvise64_64_args __user *args);
-long s390_fallocate(int fd, int mode, loff_t offset, u32 len_high, u32 len_low);
+long sys_s390_fadvise64_64(struct fadvise64_64_args __user *args);
+long sys_s390_fallocate(int fd, int mode, loff_t offset, u32 len_high,
+			u32 len_low);
 long sys_fork(void);
 long sys_clone(void);
 long sys_vfork(void);
 void execve_tail(void);
 long sys_execve(void);
-int sys_sigsuspend(int history0, int history1, old_sigset_t mask);
+long sys_sigsuspend(int history0, int history1, old_sigset_t mask);
 long sys_sigaction(int sig, const struct old_sigaction __user *act,
 		   struct old_sigaction __user *oact);
 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss);
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index b6110bdf8dc..5cd38a90e64 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -39,6 +39,7 @@
 #include <linux/tick.h>
 #include <linux/elfcore.h>
 #include <linux/kernel_stat.h>
+#include <linux/syscalls.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -225,13 +226,13 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long new_stackp,
         return 0;
 }
 
-asmlinkage long sys_fork(void)
+SYSCALL_DEFINE0(fork)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return do_fork(SIGCHLD, regs->gprs[15], regs, 0, NULL, NULL);
 }
 
-asmlinkage long sys_clone(void)
+SYSCALL_DEFINE0(clone)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	unsigned long clone_flags;
@@ -258,7 +259,7 @@ asmlinkage long sys_clone(void)
  * do not have enough call-clobbered registers to hold all
  * the information you need.
  */
-asmlinkage long sys_vfork(void)
+SYSCALL_DEFINE0(vfork)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD,
@@ -278,7 +279,7 @@ asmlinkage void execve_tail(void)
 /*
  * sys_execve() executes a new program.
  */
-asmlinkage long sys_execve(void)
+SYSCALL_DEFINE0(execve)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	char *filename;
diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c
index 8e6812a2267..3cf74c3ccb6 100644
--- a/arch/s390/kernel/signal.c
+++ b/arch/s390/kernel/signal.c
@@ -25,6 +25,7 @@
 #include <linux/personality.h>
 #include <linux/binfmts.h>
 #include <linux/tracehook.h>
+#include <linux/syscalls.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/lowcore.h>
@@ -53,8 +54,7 @@ typedef struct
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
-asmlinkage int
-sys_sigsuspend(int history0, int history1, old_sigset_t mask)
+SYSCALL_DEFINE3(sigsuspend, int, history0, int, history1, old_sigset_t, mask)
 {
 	mask &= _BLOCKABLE;
 	spin_lock_irq(&current->sighand->siglock);
@@ -70,9 +70,8 @@ sys_sigsuspend(int history0, int history1, old_sigset_t mask)
 	return -ERESTARTNOHAND;
 }
 
-asmlinkage long
-sys_sigaction(int sig, const struct old_sigaction __user *act,
-	      struct old_sigaction __user *oact)
+SYSCALL_DEFINE3(sigaction, int, sig, const struct old_sigaction __user *, act,
+		struct old_sigaction __user *, oact)
 {
 	struct k_sigaction new_ka, old_ka;
 	int ret;
@@ -102,15 +101,13 @@ sys_sigaction(int sig, const struct old_sigaction __user *act,
 	return ret;
 }
 
-asmlinkage long
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
+SYSCALL_DEFINE2(sigaltstack, const stack_t __user *, uss,
+		stack_t __user *, uoss)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	return do_sigaltstack(uss, uoss, regs->gprs[15]);
 }
 
-
-
 /* Returns non-zero on fault. */
 static int save_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 {
@@ -164,7 +161,7 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 	return 0;
 }
 
-asmlinkage long sys_sigreturn(void)
+SYSCALL_DEFINE0(sigreturn)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	sigframe __user *frame = (sigframe __user *)regs->gprs[15];
@@ -191,7 +188,7 @@ badframe:
 	return 0;
 }
 
-asmlinkage long sys_rt_sigreturn(void)
+SYSCALL_DEFINE0(rt_sigreturn)
 {
 	struct pt_regs *regs = task_pt_regs(current);
 	rt_sigframe __user *frame = (rt_sigframe __user *)regs->gprs[15];
diff --git a/arch/s390/kernel/sys_s390.c b/arch/s390/kernel/sys_s390.c
index c34be4568b8..c7ae4b17e0e 100644
--- a/arch/s390/kernel/sys_s390.c
+++ b/arch/s390/kernel/sys_s390.c
@@ -29,6 +29,7 @@
 #include <linux/personality.h>
 #include <linux/unistd.h>
 #include <linux/ipc.h>
+#include <linux/syscalls.h>
 #include <asm/uaccess.h>
 #include "entry.h"
 
@@ -74,7 +75,7 @@ struct mmap_arg_struct {
 	unsigned long offset;
 };
 
-asmlinkage long sys_mmap2(struct mmap_arg_struct __user  *arg)
+SYSCALL_DEFINE1(mmap2, struct mmap_arg_struct __user *, arg)
 {
 	struct mmap_arg_struct a;
 	int error = -EFAULT;
@@ -86,7 +87,7 @@ out:
 	return error;
 }
 
-asmlinkage long old_mmap(struct mmap_arg_struct __user *arg)
+SYSCALL_DEFINE1(s390_old_mmap, struct mmap_arg_struct __user *, arg)
 {
 	struct mmap_arg_struct a;
 	long error = -EFAULT;
@@ -108,8 +109,8 @@ out:
  *
  * This is really horribly ugly.
  */
-asmlinkage long sys_ipc(uint call, int first, unsigned long second,
-				  unsigned long third, void __user *ptr)
+SYSCALL_DEFINE5(ipc, uint, call, int, first, unsigned long, second,
+		unsigned long, third, void __user *, ptr)
 {
         struct ipc_kludge tmp;
 	int ret;
@@ -175,7 +176,7 @@ asmlinkage long sys_ipc(uint call, int first, unsigned long second,
 }
 
 #ifdef CONFIG_64BIT
-asmlinkage long s390x_newuname(struct new_utsname __user *name)
+SYSCALL_DEFINE1(s390_newuname, struct new_utsname __user *, name)
 {
 	int ret = sys_newuname(name);
 
@@ -186,7 +187,7 @@ asmlinkage long s390x_newuname(struct new_utsname __user *name)
 	return ret;
 }
 
-asmlinkage long s390x_personality(unsigned long personality)
+SYSCALL_DEFINE1(s390_personality, unsigned long, personality)
 {
 	int ret;
 
@@ -205,15 +206,13 @@ asmlinkage long s390x_personality(unsigned long personality)
  */
 #ifndef CONFIG_64BIT
 
-asmlinkage long
-s390_fadvise64(int fd, u32 offset_high, u32 offset_low, size_t len, int advice)
+SYSCALL_DEFINE5(s390_fadvise64, int, fd, u32, offset_high, u32, offset_low,
+		size_t, len, int, advice)
 {
 	return sys_fadvise64(fd, (u64) offset_high << 32 | offset_low,
 			len, advice);
 }
 
-#endif
-
 struct fadvise64_64_args {
 	int fd;
 	long long offset;
@@ -221,8 +220,7 @@ struct fadvise64_64_args {
 	int advice;
 };
 
-asmlinkage long
-s390_fadvise64_64(struct fadvise64_64_args __user *args)
+SYSCALL_DEFINE1(s390_fadvise64_64, struct fadvise64_64_args __user *, args)
 {
 	struct fadvise64_64_args a;
 
@@ -231,7 +229,6 @@ s390_fadvise64_64(struct fadvise64_64_args __user *args)
 	return sys_fadvise64_64(a.fd, a.offset, a.len, a.advice);
 }
 
-#ifndef CONFIG_64BIT
 /*
  * This is a wrapper to call sys_fallocate(). For 31 bit s390 the last
  * 64 bit argument "len" is split into the upper and lower 32 bits. The
@@ -244,9 +241,19 @@ s390_fadvise64_64(struct fadvise64_64_args __user *args)
  * to
  *   %r2: fd, %r3: mode, %r4/%r5: offset, 96(%r15)-103(%r15): len
  */
-asmlinkage long s390_fallocate(int fd, int mode, loff_t offset,
+SYSCALL_DEFINE(s390_fallocate)(int fd, int mode, loff_t offset,
 			       u32 len_high, u32 len_low)
 {
 	return sys_fallocate(fd, mode, offset, ((u64)len_high << 32) | len_low);
 }
+#ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
+asmlinkage long SyS_s390_fallocate(long fd, long mode, loff_t offset,
+				   long len_high, long len_low)
+{
+	return SYSC_s390_fallocate((int) fd, (int) mode, offset,
+				   (u32) len_high, (u32) len_low);
+}
+SYSCALL_ALIAS(sys_s390_fallocate, SyS_s390_fallocate);
+#endif
+
 #endif
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index 2d61787949d..76d16e0140b 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -98,7 +98,7 @@ SYSCALL(sys_uselib,sys_uselib,sys32_uselib_wrapper)
 SYSCALL(sys_swapon,sys_swapon,sys32_swapon_wrapper)
 SYSCALL(sys_reboot,sys_reboot,sys32_reboot_wrapper)
 SYSCALL(sys_ni_syscall,sys_ni_syscall,old32_readdir_wrapper)	/* old readdir syscall */
-SYSCALL(old_mmap,old_mmap,old32_mmap_wrapper)			/* 90 */
+SYSCALL(sys_s390_old_mmap,sys_s390_old_mmap,old32_mmap_wrapper)	/* 90 */
 SYSCALL(sys_munmap,sys_munmap,sys32_munmap_wrapper)
 SYSCALL(sys_truncate,sys_truncate,sys32_truncate_wrapper)
 SYSCALL(sys_ftruncate,sys_ftruncate,sys32_ftruncate_wrapper)
@@ -130,7 +130,7 @@ SYSCALL(sys_fsync,sys_fsync,sys32_fsync_wrapper)
 SYSCALL(sys_sigreturn,sys_sigreturn,sys32_sigreturn)
 SYSCALL(sys_clone,sys_clone,sys32_clone)			/* 120 */
 SYSCALL(sys_setdomainname,sys_setdomainname,sys32_setdomainname_wrapper)
-SYSCALL(sys_newuname,s390x_newuname,sys32_newuname_wrapper)
+SYSCALL(sys_newuname,sys_s390_newuname,sys32_newuname_wrapper)
 NI_SYSCALL							/* modify_ldt for i386 */
 SYSCALL(sys_adjtimex,sys_adjtimex,compat_sys_adjtimex_wrapper)
 SYSCALL(sys_mprotect,sys_mprotect,sys32_mprotect_wrapper)	/* 125 */
@@ -144,7 +144,7 @@ SYSCALL(sys_getpgid,sys_getpgid,sys32_getpgid_wrapper)
 SYSCALL(sys_fchdir,sys_fchdir,sys32_fchdir_wrapper)
 SYSCALL(sys_bdflush,sys_bdflush,sys32_bdflush_wrapper)
 SYSCALL(sys_sysfs,sys_sysfs,sys32_sysfs_wrapper)		/* 135 */
-SYSCALL(sys_personality,s390x_personality,sys32_personality_wrapper)
+SYSCALL(sys_personality,sys_s390_personality,sys32_personality_wrapper)
 NI_SYSCALL							/* for afs_syscall */
 SYSCALL(sys_setfsuid16,sys_ni_syscall,sys32_setfsuid16_wrapper)	/* old setfsuid16 syscall */
 SYSCALL(sys_setfsgid16,sys_ni_syscall,sys32_setfsgid16_wrapper)	/* old setfsgid16 syscall */
@@ -261,7 +261,7 @@ SYSCALL(sys_epoll_create,sys_epoll_create,sys_epoll_create_wrapper)
 SYSCALL(sys_epoll_ctl,sys_epoll_ctl,sys_epoll_ctl_wrapper)	/* 250 */
 SYSCALL(sys_epoll_wait,sys_epoll_wait,sys_epoll_wait_wrapper)
 SYSCALL(sys_set_tid_address,sys_set_tid_address,sys32_set_tid_address_wrapper)
-SYSCALL(s390_fadvise64,sys_fadvise64_64,sys32_fadvise64_wrapper)
+SYSCALL(sys_s390_fadvise64,sys_fadvise64_64,sys32_fadvise64_wrapper)
 SYSCALL(sys_timer_create,sys_timer_create,sys32_timer_create_wrapper)
 SYSCALL(sys_timer_settime,sys_timer_settime,sys32_timer_settime_wrapper)	/* 255 */
 SYSCALL(sys_timer_gettime,sys_timer_gettime,sys32_timer_gettime_wrapper)
@@ -272,7 +272,7 @@ SYSCALL(sys_clock_gettime,sys_clock_gettime,sys32_clock_gettime_wrapper)	/* 260
 SYSCALL(sys_clock_getres,sys_clock_getres,sys32_clock_getres_wrapper)
 SYSCALL(sys_clock_nanosleep,sys_clock_nanosleep,sys32_clock_nanosleep_wrapper)
 NI_SYSCALL							/* reserved for vserver */
-SYSCALL(s390_fadvise64_64,sys_ni_syscall,sys32_fadvise64_64_wrapper)
+SYSCALL(sys_s390_fadvise64_64,sys_ni_syscall,sys32_fadvise64_64_wrapper)
 SYSCALL(sys_statfs64,sys_statfs64,compat_sys_statfs64_wrapper)
 SYSCALL(sys_fstatfs64,sys_fstatfs64,compat_sys_fstatfs64_wrapper)
 SYSCALL(sys_remap_file_pages,sys_remap_file_pages,sys32_remap_file_pages_wrapper)
@@ -322,7 +322,7 @@ NI_SYSCALL							/* 310 sys_move_pages */
 SYSCALL(sys_getcpu,sys_getcpu,sys_getcpu_wrapper)
 SYSCALL(sys_epoll_pwait,sys_epoll_pwait,compat_sys_epoll_pwait_wrapper)
 SYSCALL(sys_utimes,sys_utimes,compat_sys_utimes_wrapper)
-SYSCALL(s390_fallocate,sys_fallocate,sys_fallocate_wrapper)
+SYSCALL(sys_s390_fallocate,sys_fallocate,sys_fallocate_wrapper)
 SYSCALL(sys_utimensat,sys_utimensat,compat_sys_utimensat_wrapper)	/* 315 */
 SYSCALL(sys_signalfd,sys_signalfd,compat_sys_signalfd_wrapper)
 NI_SYSCALL						/* 317 old sys_timer_fd */
-- 
GitLab


From 2465fb6605b4f8f3964b132017bf4078d1265fe9 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 14 Jan 2009 15:58:55 +0100
Subject: [PATCH 352/492] ALSA: hda - Fix missing initialization of NID 0x0e
 for STAC925x

The selector widget 0x0e isn't initialized properly in the whole probe
process, thus it can be a wrong value depending on the BIOS setup.

This patch adds the init verb to set it to the max & unmuted.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 25230f4c888..6d9a4a2aa4a 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -884,6 +884,8 @@ static struct hda_verb stac92hd71bxx_analog_core_init[] = {
 static struct hda_verb stac925x_core_init[] = {
 	/* set dac0mux for dac converter */
 	{ 0x06, AC_VERB_SET_CONNECT_SEL, 0x00},
+	/* unmute and set max the selector */
+	{ 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb07f },
 	{}
 };
 
-- 
GitLab


From 18e6959c385f3edf3991fa6662a53dac4eb10d5b Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Wed, 14 Jan 2009 07:28:16 +0100
Subject: [PATCH 353/492] mm: fix assertion

This assertion is incorrect for lockless pagecache.  By definition if we
have an unpinned page that we are trying to take a speculative reference
to, it may become the tail of a compound page at any time (if it is
freed, then reallocated as a compound page).

It was still a valid assertion for the vmscan.c LRU isolation case, but
it doesn't seem incredibly helpful...  if somebody wants it, they can
put it back directly where it applies in the vmscan code.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/mm.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/linux/mm.h b/include/linux/mm.h
index b91a73fd1bc..e8ddc98b840 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -260,7 +260,6 @@ static inline int put_page_testzero(struct page *page)
  */
 static inline int get_page_unless_zero(struct page *page)
 {
-	VM_BUG_ON(PageTail(page));
 	return atomic_inc_not_zero(&page->_count);
 }
 
-- 
GitLab


From 9316fcacb89c59fe556c48587ac02cd7f5d38045 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Wed, 14 Jan 2009 09:35:44 -0800
Subject: [PATCH 354/492] kernel/up.c: omit it if SMP=y,
 USE_GENERIC_SMP_HELPERS=n

Fix the sparc build - we were including `up.o' on SMP builds, when
CONFIG_USE_GENERIC_SMP_HELPERS=n.

Tested-by: Robert Reif <reif@earthlink.net>
Fixed-by: Robert Reif <reif@earthlink.net>
Cc: David Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/Makefile | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/kernel/Makefile b/kernel/Makefile
index 2aebc4cd787..170a9213c1b 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -40,9 +40,8 @@ obj-$(CONFIG_RT_MUTEXES) += rtmutex.o
 obj-$(CONFIG_DEBUG_RT_MUTEXES) += rtmutex-debug.o
 obj-$(CONFIG_RT_MUTEX_TESTER) += rtmutex-tester.o
 obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
-ifeq ($(CONFIG_USE_GENERIC_SMP_HELPERS),y)
-obj-y += smp.o
-else
+obj-$(CONFIG_USE_GENERIC_SMP_HELPERS) += smp.o
+ifneq ($(CONFIG_SMP),y)
 obj-y += up.o
 endif
 obj-$(CONFIG_SMP) += spinlock.o
-- 
GitLab


From 9b896033aa2781d36b2d3f756fe70325fc8487e2 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 14 Jan 2009 19:19:02 +0100
Subject: [PATCH 355/492] ide: fix accidental LOCKDEP breakage caused by
 local_irq_set() removal

commit 54cc1428cfa619e16d75baae8cb041a2eff015f0 ("ide: remove
local_irq_set() macro") accidentally replaced local_save_flags()
by local_irq_set() in ide_probe_port() and __ide_wait_stat()
which resulted in LOCKDEP breakage.

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-iops.c  | 2 +-
 drivers/ide/ide-probe.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index e728cfe7273..753b92ebe0a 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -493,7 +493,7 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti
 	stat = tp_ops->read_status(hwif);
 
 	if (stat & ATA_BUSY) {
-		local_irq_save(flags);
+		local_save_flags(flags);
 		local_irq_enable_in_hardirq();
 		timeout += jiffies;
 		while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 0ccbb4459fb..312127ea443 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -796,7 +796,7 @@ static int ide_probe_port(ide_hwif_t *hwif)
 	if (irqd)
 		disable_irq(hwif->irq);
 
-	local_irq_save(flags);
+	local_save_flags(flags);
 	local_irq_enable_in_hardirq();
 
 	if (ide_port_wait_ready(hwif) == -EBUSY)
-- 
GitLab


From b94b898f3107046b5c97c556e23529283ea5eadd Mon Sep 17 00:00:00 2001
From: Brandon Philips <brandon@ifup.org>
Date: Wed, 14 Jan 2009 19:19:02 +0100
Subject: [PATCH 356/492] it821x: Add ultra_mask quirk for Vortex86SX

On Vortex86SX with IDE controller revision 0x11 ultra DMA must be
disabled. This patch was tested by DMP and seems to work.

It is a cleaned up version of their older Kernel patch:
 http://www.dmp.com.tw/tech/vortex86sx/patch-2.6.24-DMP.gz

Tested-by: Shawn Lin <shawn@dmp.com.tw>
Signed-off-by: Brandon Philips <bphilips@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/it821x.c    | 12 ++++++++++++
 include/linux/pci_ids.h |  1 +
 2 files changed, 13 insertions(+)

diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index 0be27ac1f07..983440a9a5f 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -68,6 +68,8 @@
 
 #define DRV_NAME "it821x"
 
+#define QUIRK_VORTEX86 1
+
 struct it821x_dev
 {
 	unsigned int smart:1,		/* Are we in smart raid mode */
@@ -79,6 +81,7 @@ struct it821x_dev
 	u16	pio[2];			/* Cached PIO values */
 	u16	mwdma[2];		/* Cached MWDMA values */
 	u16	udma[2];		/* Cached UDMA values (per drive) */
+	u16	quirks;
 };
 
 #define ATA_66		0
@@ -577,6 +580,12 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 
 	hwif->ultra_mask = ATA_UDMA6;
 	hwif->mwdma_mask = ATA_MWDMA2;
+
+	/* Vortex86SX quirk: prevent Ultra-DMA mode to fix BadCRC issue */
+	if (idev->quirks & QUIRK_VORTEX86) {
+		if (dev->revision == 0x11)
+			hwif->ultra_mask = 0;
+	}
 }
 
 static void it8212_disable_raid(struct pci_dev *dev)
@@ -649,6 +658,8 @@ static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_devic
 		return -ENOMEM;
 	}
 
+	itdevs->quirks = id->driver_data;
+
 	rc = ide_pci_init_one(dev, &it821x_chipset, itdevs);
 	if (rc)
 		kfree(itdevs);
@@ -668,6 +679,7 @@ static void __devexit it821x_remove(struct pci_dev *dev)
 static const struct pci_device_id it821x_pci_tbl[] = {
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), 0 },
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), 0 },
+	{ PCI_VDEVICE(RDC, PCI_DEVICE_ID_RDC_D1010), QUIRK_VORTEX86 },
 	{ 0, },
 };
 
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index d543365518a..d56ad9c21c0 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2174,6 +2174,7 @@
 #define PCI_DEVICE_ID_RDC_R6040		0x6040
 #define PCI_DEVICE_ID_RDC_R6060		0x6060
 #define PCI_DEVICE_ID_RDC_R6061		0x6061
+#define PCI_DEVICE_ID_RDC_D1010		0x1010
 
 #define PCI_VENDOR_ID_LENOVO		0x17aa
 
-- 
GitLab


From 4a2462693b37da1438f53f3fbfc75e081659e975 Mon Sep 17 00:00:00 2001
From: Brandon Philips <brandon@ifup.org>
Date: Wed, 14 Jan 2009 19:19:03 +0100
Subject: [PATCH 357/492] it821x.c: use dev->revision instead of
 pci_read_config_byte

Minor cleanup.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Shawn Lin <shawn@dmp.com.tw>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/it821x.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c
index 983440a9a5f..e1c4f543739 100644
--- a/drivers/ide/it821x.c
+++ b/drivers/ide/it821x.c
@@ -560,8 +560,7 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 	 *	this is necessary.
 	 */
 
-	pci_read_config_byte(dev, 0x08, &conf);
-	if (conf == 0x10) {
+	if (dev->revision == 0x10) {
 		idev->timing10 = 1;
 		hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
 		if (idev->smart == 0)
-- 
GitLab


From 655772cc79c94ebf282e1df4d3c3375f05a565ae Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 14 Jan 2009 19:19:03 +0100
Subject: [PATCH 358/492] ide: can't use SSD/non-rotational queue flag for all
 CFA devices

Some rotating disks also present themselves as CFA devices.

Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-disk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 4088a622873..806760d24ce 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -633,7 +633,7 @@ static void ide_disk_setup(ide_drive_t *drive)
 	printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
 		q->max_sectors / 2);
 
-	if (ata_id_is_ssd(id) || ata_id_is_cfa(id))
+	if (ata_id_is_ssd(id))
 		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
 
 	/* calculate drive capacity, and select LBA if possible */
-- 
GitLab


From 4180e8334cf8301cf37131bc5d69c0cd724682cb Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 14 Jan 2009 19:19:03 +0100
Subject: [PATCH 359/492] via82cxxx: fix cable warning message

Remove reference to the removed old-style kernel parameter.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/via82cxxx.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index fecc0e03c3f..703c3eeb20a 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -432,8 +432,6 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i
 	if (via_clock < 20000 || via_clock > 50000) {
 		printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
 			"impossible (%d), using 33 MHz instead.\n", via_clock);
-		printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
-			"to assume 80-wire cable.\n");
 		via_clock = 33333;
 	}
 
-- 
GitLab


From cadb300a4254b1f28bce84e280b7d46c525f73c6 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 14 Jan 2009 19:19:03 +0100
Subject: [PATCH 360/492] sl82c105: remove dead code

CONFIG_LOPEC and CONFIG_SANDPOINT config options are gone.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/sl82c105.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c
index 48cc748c504..6297956507c 100644
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -310,10 +310,6 @@ static const struct ide_port_info sl82c105_chipset __devinitdata = {
 	.dma_ops	= &sl82c105_dma_ops,
 	.host_flags	= IDE_HFLAG_IO_32BIT |
 			  IDE_HFLAG_UNMASK_IRQS |
-/* FIXME: check for Compatibility mode in generic IDE PCI code */
-#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT)
-			  IDE_HFLAG_FORCE_LEGACY_IRQS |
-#endif
 			  IDE_HFLAG_SERIALIZE_DMA |
 			  IDE_HFLAG_NO_AUTODMA,
 	.pio_mask	= ATA_PIO5,
-- 
GitLab


From e86c1451d3138b4cd0378282b30397d171fa4252 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 14 Jan 2009 19:19:03 +0100
Subject: [PATCH 361/492] ide: remove unused
 CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 Documentation/mips/AU1xxx_IDE.README | 6 +-----
 drivers/ide/Kconfig                  | 5 -----
 2 files changed, 1 insertion(+), 10 deletions(-)

diff --git a/Documentation/mips/AU1xxx_IDE.README b/Documentation/mips/AU1xxx_IDE.README
index f54962aea84..8ace35ebdcd 100644
--- a/Documentation/mips/AU1xxx_IDE.README
+++ b/Documentation/mips/AU1xxx_IDE.README
@@ -52,14 +52,12 @@ Two files are introduced:
   b) 'drivers/ide/mips/au1xxx-ide.c'
      contains the functionality of the AU1XXX IDE driver
 
-Four configs variables are introduced:
+Following extra configs variables are introduced:
 
   CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA    - enable the PIO+DBDMA mode
   CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA  - enable the MWDMA mode
   CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
                                            controller
-  CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
-                                           per descriptor
 
 
 SUPPORTED IDE MODES
@@ -87,7 +85,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_AU1XXX=y
 CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDEDMA_AUTO=y
 
@@ -105,7 +102,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_IDEDMA_PCI_AUTO=y
 CONFIG_BLK_DEV_IDE_AU1XXX=y
 CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
 CONFIG_BLK_DEV_IDEDMA=y
 CONFIG_IDEDMA_AUTO=y
 
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 3f9503867e6..b1c6f68d98c 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -701,11 +701,6 @@ config BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
        depends on SOC_AU1200 && BLK_DEV_IDE_AU1XXX
 endchoice
 
-config BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ
-       int "Maximum transfer size (KB) per request (up to 128)"
-       default "128"
-       depends on BLK_DEV_IDE_AU1XXX
-
 config BLK_DEV_IDE_TX4938
 	tristate "TX4938 internal IDE support"
 	depends on SOC_TX4938
-- 
GitLab


From a294d97742568f429590cf2022d92e4b0c5f6ba0 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Wed, 14 Jan 2009 19:19:04 +0100
Subject: [PATCH 362/492] tx4938ide: Fix build error due to read_sff_dma_status
 moving

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/tx4938ide.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c
index b4ef218072c..d9095345f7c 100644
--- a/drivers/ide/tx4938ide.c
+++ b/drivers/ide/tx4938ide.c
@@ -202,7 +202,6 @@ static const struct ide_tp_ops tx4938ide_tp_ops = {
 	.exec_command		= ide_exec_command,
 	.read_status		= ide_read_status,
 	.read_altstatus		= ide_read_altstatus,
-	.read_sff_dma_status	= ide_read_sff_dma_status,
 
 	.set_irq		= ide_set_irq,
 
-- 
GitLab


From 2ea5521022ac8f4f528dcbae02668e02a3501a5a Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Wed, 14 Jan 2009 19:19:04 +0100
Subject: [PATCH 363/492] ide: fix suspend regression
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

On Monday 12 January 2009, Simon Holm Thøgersen wrote:
> commit 295f000 ("ide: don't execute the next queued command from the
> hard-IRQ context (v2)") breaks suspend to disk for me. On
> 'echo disk > /sys/power/state' the systems hangs, letting me switch
> virtual consoles, but not responding to Alt+SysRq

Restart the request queue early for REQ_TYPE_PM_RESUME requests
(though there is only one resume request for the whole resume
sequence it stays in the queue until is fully completed and now
depends on kblockd for processing consequential resume states).

Reported-and-bisected-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Tested-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-pm.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/ide/ide-pm.c b/drivers/ide/ide-pm.c
index 4b3bf6a06b7..60538d9c84e 100644
--- a/drivers/ide/ide-pm.c
+++ b/drivers/ide/ide-pm.c
@@ -186,12 +186,10 @@ void ide_complete_pm_request(ide_drive_t *drive, struct request *rq)
 	       blk_pm_suspend_request(rq) ? "suspend" : "resume");
 #endif
 	spin_lock_irqsave(q->queue_lock, flags);
-	if (blk_pm_suspend_request(rq)) {
+	if (blk_pm_suspend_request(rq))
 		blk_stop_queue(q);
-	} else {
+	else
 		drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
-		blk_start_queue(q);
-	}
 	spin_unlock_irqrestore(q->queue_lock, flags);
 
 	drive->hwif->rq = NULL;
@@ -219,6 +217,8 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 		 * point.
 		 */
 		ide_hwif_t *hwif = drive->hwif;
+		struct request_queue *q = drive->queue;
+		unsigned long flags;
 		int rc;
 #ifdef DEBUG_PM
 		printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
@@ -231,5 +231,9 @@ void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 		rc = ide_wait_not_busy(hwif, 100000);
 		if (rc)
 			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
+
+		spin_lock_irqsave(q->queue_lock, flags);
+		blk_start_queue(q);
+		spin_unlock_irqrestore(q->queue_lock, flags);
 	}
 }
-- 
GitLab


From e720b9e498b6bbb1b4f3b3d2f8e9a78578aafef7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Wed, 14 Jan 2009 19:19:04 +0100
Subject: [PATCH 364/492] IDE: fix sparse signed-ness errors with
 host->host_busy

The host_busy field in struct ide_host defaults to a
signed-long, where most arch's test_and_set_bit_*
macros use an unsigned long.

Change to using an unsigned long, which on ARM removes
the following sparse errors:

drivers/ide/ide-io.c:681:8: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:681:8:    expected unsigned long volatile *p
drivers/ide/ide-io.c:681:8:    got long volatile *<noident>
drivers/ide/ide-io.c:681:8: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:681:8:    expected unsigned long volatile *p
drivers/ide/ide-io.c:681:8:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>
drivers/ide/ide-io.c:695:3: warning: incorrect type in argument 2 (different signedness)
drivers/ide/ide-io.c:695:3:    expected unsigned long volatile *p
drivers/ide/ide-io.c:695:3:    got long volatile *<noident>

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/linux/ide.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/ide.h b/include/linux/ide.h
index 3644f632338..194da5a4b0d 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -871,7 +871,7 @@ struct ide_host {
 	ide_hwif_t	*cur_port;	/* for hosts requiring serialization */
 
 	/* used for hosts requiring serialization */
-	volatile long	host_busy;
+	volatile unsigned long	host_busy;
 };
 
 #define IDE_HOST_BUSY 0
-- 
GitLab


From 1b0652eb588e57c3ab230e0291e7da99c7e665e0 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 14 Jan 2009 08:27:35 +0100
Subject: [PATCH 365/492] ALSA: hda - Fix HP dv5 mic input

Fix HP dv5 (103c:3603) built-in mic input.

Reference: kernel bug 12440
	http://bugzilla.kernel.org/show_bug.cgi?id=12440

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: stable@kernel.org
---
 sound/pci/hda/patch_sigmatel.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 6d9a4a2aa4a..e6c13963f21 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -90,6 +90,7 @@ enum {
 	STAC_DELL_M4_2,
 	STAC_DELL_M4_3,
 	STAC_HP_M4,
+	STAC_HP_DV5,
 	STAC_92HD71BXX_MODELS
 };
 
@@ -1778,6 +1779,7 @@ static unsigned int *stac92hd71bxx_brd_tbl[STAC_92HD71BXX_MODELS] = {
 	[STAC_DELL_M4_2]	= dell_m4_2_pin_configs,
 	[STAC_DELL_M4_3]	= dell_m4_3_pin_configs,
 	[STAC_HP_M4]		= NULL,
+	[STAC_HP_DV5]		= NULL,
 };
 
 static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
@@ -1786,6 +1788,7 @@ static const char *stac92hd71bxx_models[STAC_92HD71BXX_MODELS] = {
 	[STAC_DELL_M4_2] = "dell-m4-2",
 	[STAC_DELL_M4_3] = "dell-m4-3",
 	[STAC_HP_M4] = "hp-m4",
+	[STAC_HP_DV5] = "hp-dv5",
 };
 
 static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
@@ -1799,7 +1802,7 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = {
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc,
 		      "HP dv7", STAC_HP_M4),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3603,
-		      "HP dv5", STAC_HP_M4),
+		      "HP dv5", STAC_HP_DV5),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x361a,
 				"unknown HP", STAC_HP_M4),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233,
-- 
GitLab


From 483a2b3a3182abcb7fcea986d7ea13e793bb00b1 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 14 Jan 2009 14:35:15 -0800
Subject: [PATCH 366/492] ARM etherh: Fix build failure.

Reported by Russell King:

drivers/net/arm/etherh.c:649: error: unknown field 'ndo_set_mac_addr' specified in initializer

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/arm/etherh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c
index 745ac188bab..d15d8b79d8e 100644
--- a/drivers/net/arm/etherh.c
+++ b/drivers/net/arm/etherh.c
@@ -646,7 +646,7 @@ static const struct net_device_ops etherh_netdev_ops = {
 	.ndo_get_stats		= ei_get_stats,
 	.ndo_set_multicast_list = ei_set_multicast_list,
 	.ndo_validate_addr	= eth_validate_addr,
-	.ndo_set_mac_addr	= eth_set_mac_addr,
+	.ndo_set_mac_address	= eth_set_mac_addr,
 	.ndo_change_mtu		= eth_change_mtu,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ei_poll,
-- 
GitLab


From f17f5c91ae3bfeb5cfc37fa132a5fdfceb8927be Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Wed, 14 Jan 2009 14:36:12 -0800
Subject: [PATCH 367/492] gro: Check for GSO packets and packets with frag_list

As GRO cannot be applied to packets with frag_list we need to
make sure that we reject such packets if they are fed to us,
e.g., through a tunnel device.

Also there is no point in applying GRO on GSO packets so they
too should be rejected.  This allows GRO to be used in virtio-net
which may produce GSO packets directly but may still benefit
from GRO if the other end of it doesn't support GSO.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/net/core/dev.c b/net/core/dev.c
index b715a55cccc..7dec715293b 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2392,6 +2392,9 @@ int dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 	if (!(skb->dev->features & NETIF_F_GRO))
 		goto normal;
 
+	if (skb_is_gso(skb) || skb_shinfo(skb)->frag_list)
+		goto normal;
+
 	rcu_read_lock();
 	list_for_each_entry_rcu(ptype, head, list) {
 		struct sk_buff *p;
-- 
GitLab


From f0d44ae310bc8eb0b6694e257015d8b24e1a357c Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 14 Jan 2009 14:38:02 -0800
Subject: [PATCH 368/492] phylib: Fix Freescale TBI PHY detection

Freescale on-chip TBI PHYs reports PHY ID as 0x0, but as of

commit 3ee82383f0098a2e13acc8cf1be8e47512f41e5a
Author: Giulio Benetti <giulio.benetti@micronovasrl.com>
Date:   Thu Nov 13 21:53:13 2008 +0000

    phy: fix phy address bug

    PHYID returns 0xffff and not 0xffffffff when not found and in some
    case(at91sam9263) 0x0. Maybe this patch could be useful.

phy_device.c treats PHY ID == 0x0 as bogus IDs, and that results in
gianfar driver failure to see the TBI PHYs. This code snippet triggers:

	if (!priv->tbiphy) {
		printk(KERN_WARNING "SGMII mode requires that the device "
				"tree specify a tbi-handle\n");
		return;
	}

Although tbi-handle is specified in the device tree.

Btw, technically PHY ID == 0x0 is a valid ID (if we ever see a PHY
manufactured by Xerox :-).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/phy/phy_device.c | 9 ---------
 1 file changed, 9 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e35460165bf..0a06e4fd37d 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -231,15 +231,6 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
 	if ((phy_id & 0x1fffffff) == 0x1fffffff)
 		return NULL;
 
-	/*
-	 * Broken hardware is sometimes missing the pull-up resistor on the
-	 * MDIO line, which results in reads to non-existent devices returning
-	 * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
-	 * device as well.
-	 */
-	if (phy_id == 0)
-		return NULL;
-
 	dev = phy_device_create(bus, addr, phy_id);
 
 	return dev;
-- 
GitLab


From bae584316045011ce3376816585a305d2b9b76f2 Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Wed, 14 Jan 2009 14:41:00 -0800
Subject: [PATCH 369/492] i4l: do not print a warning when shutting down an i4l
 ppp interface

When an i4l ppp interface is shut down (e.g. with /sbin/ifdown ippp0) a
scary warning is logged:

    isdn_free_channel: called with invalid drv(-1) or channel(-1)

This warning is caused by isdn_net_unbind_channel(), which always calls
isdn_free_channel() even if isdn_net_local->isdn_device and
isdn_net_local->isdn_channel are (still) in a perfectly acceptable
default state, so let's not do that.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/i4l/isdn_net.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index 7c5f97033b9..de6be7181f0 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -292,7 +292,9 @@ isdn_net_unbind_channel(isdn_net_local * lp)
 	lp->dialstate = 0;
 	dev->rx_netdev[isdn_dc2minor(lp->isdn_device, lp->isdn_channel)] = NULL;
 	dev->st_netdev[isdn_dc2minor(lp->isdn_device, lp->isdn_channel)] = NULL;
-	isdn_free_channel(lp->isdn_device, lp->isdn_channel, ISDN_USAGE_NET);
+	if (lp->isdn_device != -1 && lp->isdn_channel != -1)
+		isdn_free_channel(lp->isdn_device, lp->isdn_channel,
+				  ISDN_USAGE_NET);
 	lp->flags &= ~ISDN_NET_CONNECTED;
 	lp->isdn_device = -1;
 	lp->isdn_channel = -1;
-- 
GitLab


From 5f3e54057c62e5f654c66e4ce1172993f67fc284 Mon Sep 17 00:00:00 2001
From: Paul Bolle <pebolle@tiscali.nl>
Date: Wed, 14 Jan 2009 14:42:21 -0800
Subject: [PATCH 370/492] i4l: minor cleanups

Minor cleanups, either made possible or obvious after commit d700555 (I4l:
convert to net_device_ops).

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/isdn/i4l/isdn_net.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index de6be7181f0..cb8943da4f1 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -2515,7 +2515,6 @@ static const struct net_device_ops isdn_netdev_ops = {
 	.ndo_stop	      = isdn_net_close,
 	.ndo_do_ioctl	      = isdn_net_ioctl,
 
-	.ndo_validate_addr    = NULL,
 	.ndo_start_xmit	      = isdn_net_start_xmit,
 	.ndo_get_stats	      = isdn_net_get_stats,
 	.ndo_tx_timeout	      = isdn_net_tx_timeout,
@@ -2530,12 +2529,8 @@ static void _isdn_setup(struct net_device *dev)
 
 	ether_setup(dev);
 
-	dev->flags = IFF_NOARP | IFF_POINTOPOINT;
 	/* Setup the generic properties */
-	dev->mtu = 1500;
 	dev->flags = IFF_NOARP|IFF_POINTOPOINT;
-	dev->type = ARPHRD_ETHER;
-	dev->addr_len = ETH_ALEN;
 	dev->header_ops = NULL;
 	dev->netdev_ops = &isdn_netdev_ops;
 
-- 
GitLab


From fc8c7dc1b29560c016a67a34ccff32a712b5aa86 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 14 Jan 2009 14:55:35 -0800
Subject: [PATCH 371/492] xfrm: For 32/64 compatability wrt. xfrm_usersa_info

Reported by Jiri Klimes.

Fix suggested by Patrick McHardy.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/xfrm/xfrm_user.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index b95a2d64eb5..7877e7975da 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -1914,10 +1914,17 @@ static int xfrm_send_migrate(struct xfrm_selector *sel, u8 dir, u8 type,
 }
 #endif
 
+/* For the xfrm_usersa_info cases we have to work around some 32-bit vs.
+ * 64-bit compatability issues.  On 32-bit the structure is 220 bytes, but
+ * for 64-bit it gets padded out to 224 bytes.  Those bytes are just
+ * padding and don't have any content we care about.  Therefore as long
+ * as we have enough bytes for the content we can make both cases work.
+ */
+
 #define XMSGSIZE(type) sizeof(struct type)
 
 static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = {
-	[XFRM_MSG_NEWSA       - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info),
+	[XFRM_MSG_NEWSA       - XFRM_MSG_BASE] = 220, /* see above */
 	[XFRM_MSG_DELSA       - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id),
 	[XFRM_MSG_GETSA       - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id),
 	[XFRM_MSG_NEWPOLICY   - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info),
@@ -1927,7 +1934,7 @@ static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = {
 	[XFRM_MSG_ACQUIRE     - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_acquire),
 	[XFRM_MSG_EXPIRE      - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_expire),
 	[XFRM_MSG_UPDPOLICY   - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info),
-	[XFRM_MSG_UPDSA       - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info),
+	[XFRM_MSG_UPDSA       - XFRM_MSG_BASE] = 220, /* see above */
 	[XFRM_MSG_POLEXPIRE   - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_polexpire),
 	[XFRM_MSG_FLUSHSA     - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_flush),
 	[XFRM_MSG_FLUSHPOLICY - XFRM_MSG_BASE] = 0,
-- 
GitLab


From aa0effbd1c0269ce7dd13be8dbf13e6b04f30ebd Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Tue, 13 Jan 2009 19:31:29 -0800
Subject: [PATCH 372/492] cris: introduce asm/swab.h

Adjust the arch overrides to the new names as well.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 .../arch-v10/arch/{byteorder.h => swab.h}     | 16 ++++++++-----
 arch/cris/include/arch-v32/arch/byteorder.h   | 20 ----------------
 arch/cris/include/arch-v32/arch/swab.h        | 24 +++++++++++++++++++
 arch/cris/include/asm/Kbuild                  |  1 +
 arch/cris/include/asm/byteorder.h             | 20 +---------------
 arch/cris/include/asm/swab.h                  |  8 +++++++
 6 files changed, 44 insertions(+), 45 deletions(-)
 rename arch/cris/include/arch-v10/arch/{byteorder.h => swab.h} (55%)
 delete mode 100644 arch/cris/include/arch-v32/arch/byteorder.h
 create mode 100644 arch/cris/include/arch-v32/arch/swab.h
 create mode 100644 arch/cris/include/asm/swab.h

diff --git a/arch/cris/include/arch-v10/arch/byteorder.h b/arch/cris/include/arch-v10/arch/swab.h
similarity index 55%
rename from arch/cris/include/arch-v10/arch/byteorder.h
rename to arch/cris/include/arch-v10/arch/swab.h
index 255b646b7fa..e4e847d8a05 100644
--- a/arch/cris/include/arch-v10/arch/byteorder.h
+++ b/arch/cris/include/arch-v10/arch/swab.h
@@ -1,26 +1,30 @@
-#ifndef _CRIS_ARCH_BYTEORDER_H
-#define _CRIS_ARCH_BYTEORDER_H
+#ifndef _CRIS_ARCH_SWAB_H
+#define _CRIS_ARCH_SWAB_H
 
 #include <asm/types.h>
 #include <linux/compiler.h>
 
+#define __SWAB_64_THRU_32__
+
 /* we just define these two (as we can do the swap in a single
  * asm instruction in CRIS) and the arch-independent files will put
  * them together into ntohl etc.
  */
 
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
 	__asm__ ("swapwb %0" : "=r" (x) : "0" (x));
-  
+
 	return(x);
 }
+#define __arch_swab32 __arch_swab32
 
-static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
 {
 	__asm__ ("swapb %0" : "=r" (x) : "0" (x));
-	
+
 	return(x);
 }
+#define __arch_swab16 __arch_swab16
 
 #endif
diff --git a/arch/cris/include/arch-v32/arch/byteorder.h b/arch/cris/include/arch-v32/arch/byteorder.h
deleted file mode 100644
index 6ef8fb4a35f..00000000000
--- a/arch/cris/include/arch-v32/arch/byteorder.h
+++ /dev/null
@@ -1,20 +0,0 @@
-#ifndef _ASM_CRIS_ARCH_BYTEORDER_H
-#define _ASM_CRIS_ARCH_BYTEORDER_H
-
-#include <asm/types.h>
-
-static inline __const__ __u32
-___arch__swab32(__u32 x)
-{
-	__asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x));
-	return (x);
-}
-
-static inline __const__ __u16
-___arch__swab16(__u16 x)
-{
-	__asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x));
-	return (x);
-}
-
-#endif /* _ASM_CRIS_ARCH_BYTEORDER_H */
diff --git a/arch/cris/include/arch-v32/arch/swab.h b/arch/cris/include/arch-v32/arch/swab.h
new file mode 100644
index 00000000000..9a4ea5e209c
--- /dev/null
+++ b/arch/cris/include/arch-v32/arch/swab.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_CRIS_ARCH_SWAB_H
+#define _ASM_CRIS_ARCH_SWAB_H
+
+#include <asm/types.h>
+
+#define __SWAB_64_THRU_32__
+
+static inline __const__ __u32
+__arch_swab32(__u32 x)
+{
+	__asm__ __volatile__ ("swapwb %0" : "=r" (x) : "0" (x));
+	return (x);
+}
+#define __arch_swab32 __arch_swab32
+
+static inline __const__ __u16
+__arch_swab16(__u16 x)
+{
+	__asm__ __volatile__ ("swapb %0" : "=r" (x) : "0" (x));
+	return (x);
+}
+#define __arch_swab16 __arch_swab16
+
+#endif /* _ASM_CRIS_ARCH_SWAB_H */
diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild
index d5b631935ec..b79b7c6543a 100644
--- a/arch/cris/include/asm/Kbuild
+++ b/arch/cris/include/asm/Kbuild
@@ -9,3 +9,4 @@ header-y += sync_serial.h
 
 unifdef-y += etraxgpio.h
 unifdef-y += rs485.h
+unifdef-y += swab.h
diff --git a/arch/cris/include/asm/byteorder.h b/arch/cris/include/asm/byteorder.h
index cc8e418cfd1..7678d86317a 100644
--- a/arch/cris/include/asm/byteorder.h
+++ b/arch/cris/include/asm/byteorder.h
@@ -1,25 +1,7 @@
 #ifndef _CRIS_BYTEORDER_H
 #define _CRIS_BYTEORDER_H
 
-#ifdef __GNUC__
-
-#ifdef __KERNEL__
-#include <arch/byteorder.h>
-
-/* defines are necessary because the other files detect the presence
- * of a defined __arch_swab32, not an inline
- */
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-#endif /* __KERNEL__ */
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
+#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif
diff --git a/arch/cris/include/asm/swab.h b/arch/cris/include/asm/swab.h
new file mode 100644
index 00000000000..80668e88419
--- /dev/null
+++ b/arch/cris/include/asm/swab.h
@@ -0,0 +1,8 @@
+#ifndef _CRIS_SWAB_H
+#define _CRIS_SWAB_H
+
+#ifdef __KERNEL__
+#include <arch/swab.h>
+#endif /* __KERNEL__ */
+
+#endif /* _CRIS_SWAB_H */
-- 
GitLab


From 74d96f018673759d04d032c137d132f6447bfb1e Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Tue, 13 Jan 2009 19:27:09 -0800
Subject: [PATCH 373/492] byteorder: make swab.h include asm/swab.h like a
 regular header

Add swab.h to kbuild.asm and remove the individual entries from
each arch, mark as unifdef as some arches have some kernel-only
bits inside.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/Kbuild          | 1 -
 arch/alpha/include/asm/byteorder.h     | 1 -
 arch/arm/include/asm/Kbuild            | 1 -
 arch/arm/include/asm/byteorder.h       | 2 --
 arch/avr32/include/asm/Kbuild          | 1 -
 arch/avr32/include/asm/byteorder.h     | 1 -
 arch/blackfin/include/asm/Kbuild       | 1 -
 arch/blackfin/include/asm/byteorder.h  | 1 -
 arch/cris/include/asm/Kbuild           | 1 -
 arch/cris/include/asm/byteorder.h      | 1 -
 arch/h8300/include/asm/Kbuild          | 1 -
 arch/h8300/include/asm/byteorder.h     | 1 -
 arch/ia64/include/asm/Kbuild           | 1 -
 arch/ia64/include/asm/byteorder.h      | 1 -
 arch/m68knommu/include/asm/Kbuild      | 2 --
 arch/m68knommu/include/asm/byteorder.h | 1 -
 arch/mips/include/asm/Kbuild           | 1 -
 arch/mips/include/asm/byteorder.h      | 2 --
 arch/parisc/include/asm/Kbuild         | 1 -
 arch/parisc/include/asm/byteorder.h    | 1 -
 arch/powerpc/include/asm/Kbuild        | 1 -
 arch/powerpc/include/asm/byteorder.h   | 2 --
 arch/s390/include/asm/Kbuild           | 1 -
 arch/s390/include/asm/byteorder.h      | 1 -
 arch/sh/include/asm/Kbuild             | 1 -
 arch/sh/include/asm/byteorder.h        | 2 --
 arch/sparc/include/asm/Kbuild          | 1 -
 arch/sparc/include/asm/byteorder.h     | 1 -
 arch/x86/include/asm/Kbuild            | 1 -
 arch/x86/include/asm/byteorder.h       | 1 -
 arch/xtensa/include/asm/Kbuild         | 2 --
 arch/xtensa/include/asm/byteorder.h    | 2 --
 include/asm-frv/Kbuild                 | 1 -
 include/asm-frv/byteorder.h            | 1 -
 include/asm-generic/Kbuild.asm         | 1 +
 include/asm-m32r/Kbuild                | 1 -
 include/asm-m32r/byteorder.h           | 2 --
 include/asm-m68k/Kbuild                | 1 -
 include/asm-m68k/byteorder.h           | 1 -
 include/asm-mn10300/Kbuild             | 1 -
 include/asm-mn10300/byteorder.h        | 1 -
 include/linux/swab.h                   | 2 +-
 42 files changed, 2 insertions(+), 49 deletions(-)

diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild
index 4dad2736057..b7c8f188b31 100644
--- a/arch/alpha/include/asm/Kbuild
+++ b/arch/alpha/include/asm/Kbuild
@@ -9,4 +9,3 @@ unifdef-y += console.h
 unifdef-y += fpu.h
 unifdef-y += sysinfo.h
 unifdef-y += compiler.h
-unifdef-y += swab.h
diff --git a/arch/alpha/include/asm/byteorder.h b/arch/alpha/include/asm/byteorder.h
index 6772f316870..73683093202 100644
--- a/arch/alpha/include/asm/byteorder.h
+++ b/arch/alpha/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _ALPHA_BYTEORDER_H
 #define _ALPHA_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif /* _ALPHA_BYTEORDER_H */
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
index 43b0b2ba392..73237bd130a 100644
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@@ -1,4 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
 unifdef-y += hwcap.h
-unifdef-y += swab.h
diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
index c02b6fc28e1..77379748b17 100644
--- a/arch/arm/include/asm/byteorder.h
+++ b/arch/arm/include/asm/byteorder.h
@@ -15,8 +15,6 @@
 #ifndef __ASM_ARM_BYTEORDER_H
 #define __ASM_ARM_BYTEORDER_H
 
-#include <asm/swab.h>
-
 #ifdef __ARMEB__
 #include <linux/byteorder/big_endian.h>
 #else
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
index 219822c8ad1..3136628ba8d 100644
--- a/arch/avr32/include/asm/Kbuild
+++ b/arch/avr32/include/asm/Kbuild
@@ -1,4 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
-header-y	+= swab.h
 header-y	+= cachectl.h
diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h
index 2aba64b4e12..50abc21619a 100644
--- a/arch/avr32/include/asm/byteorder.h
+++ b/arch/avr32/include/asm/byteorder.h
@@ -4,7 +4,6 @@
 #ifndef __ASM_AVR32_BYTEORDER_H
 #define __ASM_AVR32_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* __ASM_AVR32_BYTEORDER_H */
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index d0d1ac43554..606ecfdcc96 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -1,4 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
 unifdef-y += fixed_code.h
-unifdef-y += swab.h
diff --git a/arch/blackfin/include/asm/byteorder.h b/arch/blackfin/include/asm/byteorder.h
index b9e797a497b..3e69106a4d3 100644
--- a/arch/blackfin/include/asm/byteorder.h
+++ b/arch/blackfin/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _BLACKFIN_BYTEORDER_H
 #define _BLACKFIN_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif				/* _BLACKFIN_BYTEORDER_H */
diff --git a/arch/cris/include/asm/Kbuild b/arch/cris/include/asm/Kbuild
index b79b7c6543a..d5b631935ec 100644
--- a/arch/cris/include/asm/Kbuild
+++ b/arch/cris/include/asm/Kbuild
@@ -9,4 +9,3 @@ header-y += sync_serial.h
 
 unifdef-y += etraxgpio.h
 unifdef-y += rs485.h
-unifdef-y += swab.h
diff --git a/arch/cris/include/asm/byteorder.h b/arch/cris/include/asm/byteorder.h
index 7678d86317a..bcd189798e2 100644
--- a/arch/cris/include/asm/byteorder.h
+++ b/arch/cris/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _CRIS_BYTEORDER_H
 #define _CRIS_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif
diff --git a/arch/h8300/include/asm/Kbuild b/arch/h8300/include/asm/Kbuild
index 27b108a86b3..c68e1680da0 100644
--- a/arch/h8300/include/asm/Kbuild
+++ b/arch/h8300/include/asm/Kbuild
@@ -1,2 +1 @@
 include include/asm-generic/Kbuild.asm
-unifdef-y += swab.h
diff --git a/arch/h8300/include/asm/byteorder.h b/arch/h8300/include/asm/byteorder.h
index c36b80a3dd8..13539da99ef 100644
--- a/arch/h8300/include/asm/byteorder.h
+++ b/arch/h8300/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _H8300_BYTEORDER_H
 #define _H8300_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _H8300_BYTEORDER_H */
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
index 3b25bd9dca9..ccbe8ae47a6 100644
--- a/arch/ia64/include/asm/Kbuild
+++ b/arch/ia64/include/asm/Kbuild
@@ -14,4 +14,3 @@ unifdef-y += gcc_intrin.h
 unifdef-y += intrinsics.h
 unifdef-y += perfmon.h
 unifdef-y += ustack.h
-unifdef-y += swab.h
diff --git a/arch/ia64/include/asm/byteorder.h b/arch/ia64/include/asm/byteorder.h
index 0f84c5cb703..a8dd7355815 100644
--- a/arch/ia64/include/asm/byteorder.h
+++ b/arch/ia64/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_IA64_BYTEORDER_H
 #define _ASM_IA64_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif /* _ASM_IA64_BYTEORDER_H */
diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild
index 58c02a45413..c68e1680da0 100644
--- a/arch/m68knommu/include/asm/Kbuild
+++ b/arch/m68knommu/include/asm/Kbuild
@@ -1,3 +1 @@
 include include/asm-generic/Kbuild.asm
-
-unifdef-y += swab.h
diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h
index a6f0b8f7f62..9c6c76a1504 100644
--- a/arch/m68knommu/include/asm/byteorder.h
+++ b/arch/m68knommu/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _M68KNOMMU_BYTEORDER_H
 #define _M68KNOMMU_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _M68KNOMMU_BYTEORDER_H */
diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild
index 023866c0c10..7897f05e316 100644
--- a/arch/mips/include/asm/Kbuild
+++ b/arch/mips/include/asm/Kbuild
@@ -1,4 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
 header-y += cachectl.h sgidefs.h sysmips.h
-header-y += swab.h
diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h
index 607b7183070..9579051ff1c 100644
--- a/arch/mips/include/asm/byteorder.h
+++ b/arch/mips/include/asm/byteorder.h
@@ -8,8 +8,6 @@
 #ifndef _ASM_BYTEORDER_H
 #define _ASM_BYTEORDER_H
 
-#include <asm/swab.h>
-
 #if defined(__MIPSEB__)
 #include <linux/byteorder/big_endian.h>
 #elif defined(__MIPSEL__)
diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild
index 2121d99f836..f88b252e419 100644
--- a/arch/parisc/include/asm/Kbuild
+++ b/arch/parisc/include/asm/Kbuild
@@ -1,4 +1,3 @@
 include include/asm-generic/Kbuild.asm
 
 unifdef-y += pdc.h
-unifdef-y += swab.h
diff --git a/arch/parisc/include/asm/byteorder.h b/arch/parisc/include/asm/byteorder.h
index da66029c4cb..58af2c5f5d6 100644
--- a/arch/parisc/include/asm/byteorder.h
+++ b/arch/parisc/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _PARISC_BYTEORDER_H
 #define _PARISC_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _PARISC_BYTEORDER_H */
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
index 9268602de5d..5ab7d7fe198 100644
--- a/arch/powerpc/include/asm/Kbuild
+++ b/arch/powerpc/include/asm/Kbuild
@@ -35,4 +35,3 @@ unifdef-y += spu_info.h
 unifdef-y += termios.h
 unifdef-y += types.h
 unifdef-y += unistd.h
-unifdef-y += swab.h
diff --git a/arch/powerpc/include/asm/byteorder.h b/arch/powerpc/include/asm/byteorder.h
index 5cca27a4153..aa6cc4fac96 100644
--- a/arch/powerpc/include/asm/byteorder.h
+++ b/arch/powerpc/include/asm/byteorder.h
@@ -7,8 +7,6 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _ASM_POWERPC_BYTEORDER_H */
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
index f2af4167bd5..63a23415fba 100644
--- a/arch/s390/include/asm/Kbuild
+++ b/arch/s390/include/asm/Kbuild
@@ -13,4 +13,3 @@ unifdef-y += cmb.h
 unifdef-y += debug.h
 unifdef-y += chpid.h
 unifdef-y += schid.h
-unifdef-y += swab.h
diff --git a/arch/s390/include/asm/byteorder.h b/arch/s390/include/asm/byteorder.h
index b95a2b2933f..a332e59e26f 100644
--- a/arch/s390/include/asm/byteorder.h
+++ b/arch/s390/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _S390_BYTEORDER_H
 #define _S390_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _S390_BYTEORDER_H */
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
index f1a2a0d1c79..43910cdf78a 100644
--- a/arch/sh/include/asm/Kbuild
+++ b/arch/sh/include/asm/Kbuild
@@ -6,4 +6,3 @@ unifdef-y += unistd_32.h
 unifdef-y += unistd_64.h
 unifdef-y += posix_types_32.h
 unifdef-y += posix_types_64.h
-unifdef-y += swab.h
diff --git a/arch/sh/include/asm/byteorder.h b/arch/sh/include/asm/byteorder.h
index e95c41a5c8c..db2f5d7cb17 100644
--- a/arch/sh/include/asm/byteorder.h
+++ b/arch/sh/include/asm/byteorder.h
@@ -1,8 +1,6 @@
 #ifndef __ASM_SH_BYTEORDER_H
 #define __ASM_SH_BYTEORDER_H
 
-#include <asm/swab.h>
-
 #ifdef __LITTLE_ENDIAN__
 #include <linux/byteorder/little_endian.h>
 #else
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index 95e38a43dff..deeb0fba802 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -17,4 +17,3 @@ header-y += traps.h
 header-y += uctx.h
 header-y += utrap.h
 header-y += watchdog.h
-header-y += swab.h
diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h
index 48a047cd6fa..ccc1b6b7de6 100644
--- a/arch/sparc/include/asm/byteorder.h
+++ b/arch/sparc/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _SPARC_BYTEORDER_H
 #define _SPARC_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _SPARC_BYTEORDER_H */
diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild
index a9f8a814a1f..4a8e80cdcfa 100644
--- a/arch/x86/include/asm/Kbuild
+++ b/arch/x86/include/asm/Kbuild
@@ -22,4 +22,3 @@ unifdef-y += unistd_32.h
 unifdef-y += unistd_64.h
 unifdef-y += vm86.h
 unifdef-y += vsyscall.h
-unifdef-y += swab.h
diff --git a/arch/x86/include/asm/byteorder.h b/arch/x86/include/asm/byteorder.h
index 7c49917e3d9..b13a7a88f3e 100644
--- a/arch/x86/include/asm/byteorder.h
+++ b/arch/x86/include/asm/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_X86_BYTEORDER_H
 #define _ASM_X86_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif /* _ASM_X86_BYTEORDER_H */
diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild
index 58c02a45413..c68e1680da0 100644
--- a/arch/xtensa/include/asm/Kbuild
+++ b/arch/xtensa/include/asm/Kbuild
@@ -1,3 +1 @@
 include include/asm-generic/Kbuild.asm
-
-unifdef-y += swab.h
diff --git a/arch/xtensa/include/asm/byteorder.h b/arch/xtensa/include/asm/byteorder.h
index 329b94591ca..54eb6315349 100644
--- a/arch/xtensa/include/asm/byteorder.h
+++ b/arch/xtensa/include/asm/byteorder.h
@@ -1,8 +1,6 @@
 #ifndef _XTENSA_BYTEORDER_H
 #define _XTENSA_BYTEORDER_H
 
-#include <asm/swab.h>
-
 #ifdef __XTENSA_EL__
 #include <linux/byteorder/little_endian.h>
 #elif defined(__XTENSA_EB__)
diff --git a/include/asm-frv/Kbuild b/include/asm-frv/Kbuild
index 1f44e7c7699..0f8956def73 100644
--- a/include/asm-frv/Kbuild
+++ b/include/asm-frv/Kbuild
@@ -3,4 +3,3 @@ include include/asm-generic/Kbuild.asm
 header-y += registers.h
 
 unifdef-y += termios.h
-unifdef-y += swab.h
diff --git a/include/asm-frv/byteorder.h b/include/asm-frv/byteorder.h
index 1187e51ecd1..f29b7593e08 100644
--- a/include/asm-frv/byteorder.h
+++ b/include/asm-frv/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_BYTEORDER_H
 #define _ASM_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _ASM_BYTEORDER_H */
diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 1870d5e05f1..70d185534b9 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -31,6 +31,7 @@ unifdef-y += socket.h
 unifdef-y += sockios.h
 unifdef-y += stat.h
 unifdef-y += statfs.h
+unifdef-y += swab.h
 unifdef-y += termbits.h
 unifdef-y += termios.h
 unifdef-y += types.h
diff --git a/include/asm-m32r/Kbuild b/include/asm-m32r/Kbuild
index 27b108a86b3..c68e1680da0 100644
--- a/include/asm-m32r/Kbuild
+++ b/include/asm-m32r/Kbuild
@@ -1,2 +1 @@
 include include/asm-generic/Kbuild.asm
-unifdef-y += swab.h
diff --git a/include/asm-m32r/byteorder.h b/include/asm-m32r/byteorder.h
index 61ff9cfd845..21855d8b028 100644
--- a/include/asm-m32r/byteorder.h
+++ b/include/asm-m32r/byteorder.h
@@ -1,8 +1,6 @@
 #ifndef _ASM_M32R_BYTEORDER_H
 #define _ASM_M32R_BYTEORDER_H
 
-#include <asm/swab.h>
-
 #if defined(__LITTLE_ENDIAN__)
 #  include <linux/byteorder/little_endian.h>
 #else
diff --git a/include/asm-m68k/Kbuild b/include/asm-m68k/Kbuild
index 52fd96b4142..1a922fad76f 100644
--- a/include/asm-m68k/Kbuild
+++ b/include/asm-m68k/Kbuild
@@ -1,3 +1,2 @@
 include include/asm-generic/Kbuild.asm
 header-y += cachectl.h
-unifdef-y += swab.h
diff --git a/include/asm-m68k/byteorder.h b/include/asm-m68k/byteorder.h
index 300866523b8..31b260a8880 100644
--- a/include/asm-m68k/byteorder.h
+++ b/include/asm-m68k/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _M68K_BYTEORDER_H
 #define _M68K_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/big_endian.h>
 
 #endif /* _M68K_BYTEORDER_H */
diff --git a/include/asm-mn10300/Kbuild b/include/asm-mn10300/Kbuild
index 27b108a86b3..c68e1680da0 100644
--- a/include/asm-mn10300/Kbuild
+++ b/include/asm-mn10300/Kbuild
@@ -1,2 +1 @@
 include include/asm-generic/Kbuild.asm
-unifdef-y += swab.h
diff --git a/include/asm-mn10300/byteorder.h b/include/asm-mn10300/byteorder.h
index 45b18ded19e..5dd0bdd9fee 100644
--- a/include/asm-mn10300/byteorder.h
+++ b/include/asm-mn10300/byteorder.h
@@ -1,7 +1,6 @@
 #ifndef _ASM_BYTEORDER_H
 #define _ASM_BYTEORDER_H
 
-#include <asm/swab.h>
 #include <linux/byteorder/little_endian.h>
 
 #endif /* _ASM_BYTEORDER_H */
diff --git a/include/linux/swab.h b/include/linux/swab.h
index be5284d4a05..ea0c02fd516 100644
--- a/include/linux/swab.h
+++ b/include/linux/swab.h
@@ -3,7 +3,7 @@
 
 #include <linux/types.h>
 #include <linux/compiler.h>
-#include <asm/byteorder.h>
+#include <asm/swab.h>
 
 /*
  * casts are necessary for constants, because we never know how for sure
-- 
GitLab


From f557206800801410c30e53ce7a27219b2c4cf0ba Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Wed, 14 Jan 2009 20:40:03 -0800
Subject: [PATCH 374/492] gro: Fix page ref count for skbs freed normally

When an skb with page frags is merged into an existing one, we
cannibalise its reference count.  This is OK when the skb is
reused because we set nr_frags to zero in that case.  However,
for the case where the skb is freed through kfree_skb, we didn't
clear nr_frags which causes the page to be freed prematurely.

This is fixed by moving the skb resetting into skb_gro_receive.

Reported-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c    | 6 ------
 net/core/skbuff.c | 6 ++++++
 2 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 7dec715293b..60377b6c0a8 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2491,12 +2491,6 @@ EXPORT_SYMBOL(napi_gro_receive);
 
 void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb)
 {
-	skb_shinfo(skb)->nr_frags = 0;
-
-	skb->len -= skb->data_len;
-	skb->truesize -= skb->data_len;
-	skb->data_len = 0;
-
 	__skb_pull(skb, skb_headlen(skb));
 	skb_reserve(skb, NET_IP_ALIGN - skb_headroom(skb));
 
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 5110b359c75..65eac773903 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2602,6 +2602,12 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb)
 		       skb_shinfo(skb)->nr_frags * sizeof(skb_frag_t));
 
 		skb_shinfo(p)->nr_frags += skb_shinfo(skb)->nr_frags;
+		skb_shinfo(skb)->nr_frags = 0;
+
+		skb->truesize -= skb->data_len;
+		skb->len -= skb->data_len;
+		skb->data_len = 0;
+
 		NAPI_GRO_CB(skb)->free = 1;
 		goto done;
 	}
-- 
GitLab


From 4e704ee3c2cd38748ca59d835435d6a7e7f6f613 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Wed, 14 Jan 2009 20:41:12 -0800
Subject: [PATCH 375/492] gso: Ensure that the packet is long enough

When we get a GSO packet from an untrusted source, we need to
ensure that it is sufficiently long so that we don't end up
crashing.

Based on discovery and patch by Ian Campbell.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 48ada1b2d2c..0cd71b84e48 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2389,7 +2389,7 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, int features)
 	unsigned int seq;
 	__be32 delta;
 	unsigned int oldlen;
-	unsigned int len;
+	unsigned int mss;
 
 	if (!pskb_may_pull(skb, sizeof(*th)))
 		goto out;
@@ -2405,10 +2405,13 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, int features)
 	oldlen = (u16)~skb->len;
 	__skb_pull(skb, thlen);
 
+	mss = skb_shinfo(skb)->gso_size;
+	if (unlikely(skb->len <= mss))
+		goto out;
+
 	if (skb_gso_ok(skb, features | NETIF_F_GSO_ROBUST)) {
 		/* Packet is from an untrusted source, reset gso_segs. */
 		int type = skb_shinfo(skb)->gso_type;
-		int mss;
 
 		if (unlikely(type &
 			     ~(SKB_GSO_TCPV4 |
@@ -2419,7 +2422,6 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, int features)
 			     !(type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))))
 			goto out;
 
-		mss = skb_shinfo(skb)->gso_size;
 		skb_shinfo(skb)->gso_segs = DIV_ROUND_UP(skb->len, mss);
 
 		segs = NULL;
@@ -2430,8 +2432,7 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, int features)
 	if (IS_ERR(segs))
 		goto out;
 
-	len = skb_shinfo(skb)->gso_size;
-	delta = htonl(oldlen + (thlen + len));
+	delta = htonl(oldlen + (thlen + mss));
 
 	skb = segs;
 	th = tcp_hdr(skb);
@@ -2447,7 +2448,7 @@ struct sk_buff *tcp_tso_segment(struct sk_buff *skb, int features)
 			     csum_fold(csum_partial(skb_transport_header(skb),
 						    thlen, skb->csum));
 
-		seq += len;
+		seq += mss;
 		skb = skb->next;
 		th = tcp_hdr(skb);
 
-- 
GitLab


From d7e094d4212bc72f5575e54edfef1349e0c4cdb5 Mon Sep 17 00:00:00 2001
From: Mike Ditto <mditto@consentry.com>
Date: Wed, 14 Jan 2009 20:43:43 -0800
Subject: [PATCH 376/492] powerpc/fs_enet: Add missing irq free in error path.

If something goes wrong attaching to phy driver, we weren't freeing
the IRQ.

Signed-off-by: Mike Ditto <mditto@consentry.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/fs_enet/fs_enet-main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 4e6a9195fe5..ce900e54d8d 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -795,6 +795,7 @@ static int fs_enet_open(struct net_device *dev)
 
 	err = fs_init_phy(dev);
 	if (err) {
+		free_irq(fep->interrupt, dev);
 		if (fep->fpi->use_napi)
 			napi_disable(&fep->napi);
 		return err;
-- 
GitLab


From d1d5e6b1cead3df6f722d1d458874bd7f93da8d6 Mon Sep 17 00:00:00 2001
From: Daniele Venzano <venza@brownhat.org>
Date: Wed, 14 Jan 2009 20:46:24 -0800
Subject: [PATCH 377/492] sis900: generate fake MAC address if the hardware
 doesn't have one

The attached patch modifies the sis900 driver when the MAC address
read from the hardware is invalid. As suggested, the patch now
generates a random address so that the user can go on and use
the hardware. In any case a message is also shown to warn on the
unexpected condition.
This seems to happen with newer HW implementation of the sis900
chipset, since this never came up before.

Patch is against vanilla 2.6.28 (but the driver doesn't change so often,
so it will probably apply to older/newer versions too).

See bugzilla ID 10201 and 11649 and ignore the previous patch.

Signed-off-by: Daniele Venzano <venza@brownhat.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/sis900.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 6cbefcae9ac..be4465bc0a6 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -509,10 +509,10 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev,
 	else
 		ret = sis900_get_mac_addr(pci_dev, net_dev);
 
-	if (ret == 0) {
-		printk(KERN_WARNING "%s: Cannot read MAC address.\n", dev_name);
-		ret = -ENODEV;
-		goto err_unmap_rx;
+	if (!ret || !is_valid_ether_addr(net_dev->dev_addr)) {
+		random_ether_addr(net_dev->dev_addr);
+		printk(KERN_WARNING "%s: Unreadable or invalid MAC address,"
+				"using random generated one\n", dev_name);
 	}
 
 	/* 630ET : set the mii access mode as software-mode */
-- 
GitLab


From 2edbb454428729f450f7a0aabbf95ac62b46b78a Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Wed, 14 Jan 2009 20:47:30 -0800
Subject: [PATCH 378/492] netxen: fix endianness in firmware commands

o Set restricted (little endian) data types in firmware command
  requests and responses.
o Remove unnecessary conversion to LE when writing registers.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic.h      | 98 ++++++++++++++--------------
 drivers/net/netxen/netxen_nic_ctx.c  | 50 ++++++--------
 drivers/net/netxen/netxen_nic_hw.c   | 42 +++++++-----
 drivers/net/netxen/netxen_nic_init.c |  2 +-
 4 files changed, 95 insertions(+), 97 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index f8e601c51da..31311cc66d1 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -995,31 +995,31 @@ struct netxen_recv_context {
  */
 
 typedef struct {
-	u64 host_phys_addr;	/* Ring base addr */
-	u32 ring_size;		/* Ring entries */
-	u16 msi_index;
-	u16 rsvd;		/* Padding */
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le32 ring_size;		/* Ring entries */
+	__le16 msi_index;
+	__le16 rsvd;		/* Padding */
 } nx_hostrq_sds_ring_t;
 
 typedef struct {
-	u64 host_phys_addr;	/* Ring base addr */
-	u64 buff_size;		/* Packet buffer size */
-	u32 ring_size;		/* Ring entries */
-	u32 ring_kind;		/* Class of ring */
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le64 buff_size;		/* Packet buffer size */
+	__le32 ring_size;		/* Ring entries */
+	__le32 ring_kind;		/* Class of ring */
 } nx_hostrq_rds_ring_t;
 
 typedef struct {
-	u64 host_rsp_dma_addr;	/* Response dma'd here */
-	u32 capabilities[4];	/* Flag bit vector */
-	u32 host_int_crb_mode;	/* Interrupt crb usage */
-	u32 host_rds_crb_mode;	/* RDS crb usage */
+	__le64 host_rsp_dma_addr;	/* Response dma'd here */
+	__le32 capabilities[4];	/* Flag bit vector */
+	__le32 host_int_crb_mode;	/* Interrupt crb usage */
+	__le32 host_rds_crb_mode;	/* RDS crb usage */
 	/* These ring offsets are relative to data[0] below */
-	u32 rds_ring_offset;	/* Offset to RDS config */
-	u32 sds_ring_offset;	/* Offset to SDS config */
-	u16 num_rds_rings;	/* Count of RDS rings */
-	u16 num_sds_rings;	/* Count of SDS rings */
-	u16 rsvd1;		/* Padding */
-	u16 rsvd2;		/* Padding */
+	__le32 rds_ring_offset;	/* Offset to RDS config */
+	__le32 sds_ring_offset;	/* Offset to SDS config */
+	__le16 num_rds_rings;	/* Count of RDS rings */
+	__le16 num_sds_rings;	/* Count of SDS rings */
+	__le16 rsvd1;		/* Padding */
+	__le16 rsvd2;		/* Padding */
 	u8  reserved[128]; 	/* reserve space for future expansion*/
 	/* MUST BE 64-bit aligned.
 	   The following is packed:
@@ -1029,24 +1029,24 @@ typedef struct {
 } nx_hostrq_rx_ctx_t;
 
 typedef struct {
-	u32 host_producer_crb;	/* Crb to use */
-	u32 rsvd1;		/* Padding */
+	__le32 host_producer_crb;	/* Crb to use */
+	__le32 rsvd1;		/* Padding */
 } nx_cardrsp_rds_ring_t;
 
 typedef struct {
-	u32 host_consumer_crb;	/* Crb to use */
-	u32 interrupt_crb;	/* Crb to use */
+	__le32 host_consumer_crb;	/* Crb to use */
+	__le32 interrupt_crb;	/* Crb to use */
 } nx_cardrsp_sds_ring_t;
 
 typedef struct {
 	/* These ring offsets are relative to data[0] below */
-	u32 rds_ring_offset;	/* Offset to RDS config */
-	u32 sds_ring_offset;	/* Offset to SDS config */
-	u32 host_ctx_state;	/* Starting State */
-	u32 num_fn_per_port;	/* How many PCI fn share the port */
-	u16 num_rds_rings;	/* Count of RDS rings */
-	u16 num_sds_rings;	/* Count of SDS rings */
-	u16 context_id;		/* Handle for context */
+	__le32 rds_ring_offset;	/* Offset to RDS config */
+	__le32 sds_ring_offset;	/* Offset to SDS config */
+	__le32 host_ctx_state;	/* Starting State */
+	__le32 num_fn_per_port;	/* How many PCI fn share the port */
+	__le16 num_rds_rings;	/* Count of RDS rings */
+	__le16 num_sds_rings;	/* Count of SDS rings */
+	__le16 context_id;		/* Handle for context */
 	u8  phys_port;		/* Physical id of port */
 	u8  virt_port;		/* Virtual/Logical id of port */
 	u8  reserved[128];	/* save space for future expansion */
@@ -1072,34 +1072,34 @@ typedef struct {
  */
 
 typedef struct {
-	u64 host_phys_addr;	/* Ring base addr */
-	u32 ring_size;		/* Ring entries */
-	u32 rsvd;		/* Padding */
+	__le64 host_phys_addr;	/* Ring base addr */
+	__le32 ring_size;		/* Ring entries */
+	__le32 rsvd;		/* Padding */
 } nx_hostrq_cds_ring_t;
 
 typedef struct {
-	u64 host_rsp_dma_addr;	/* Response dma'd here */
-	u64 cmd_cons_dma_addr;	/*  */
-	u64 dummy_dma_addr;	/*  */
-	u32 capabilities[4];	/* Flag bit vector */
-	u32 host_int_crb_mode;	/* Interrupt crb usage */
-	u32 rsvd1;		/* Padding */
-	u16 rsvd2;		/* Padding */
-	u16 interrupt_ctl;
-	u16 msi_index;
-	u16 rsvd3;		/* Padding */
+	__le64 host_rsp_dma_addr;	/* Response dma'd here */
+	__le64 cmd_cons_dma_addr;	/*  */
+	__le64 dummy_dma_addr;	/*  */
+	__le32 capabilities[4];	/* Flag bit vector */
+	__le32 host_int_crb_mode;	/* Interrupt crb usage */
+	__le32 rsvd1;		/* Padding */
+	__le16 rsvd2;		/* Padding */
+	__le16 interrupt_ctl;
+	__le16 msi_index;
+	__le16 rsvd3;		/* Padding */
 	nx_hostrq_cds_ring_t cds_ring;	/* Desc of cds ring */
 	u8  reserved[128];	/* future expansion */
 } nx_hostrq_tx_ctx_t;
 
 typedef struct {
-	u32 host_producer_crb;	/* Crb to use */
-	u32 interrupt_crb;	/* Crb to use */
+	__le32 host_producer_crb;	/* Crb to use */
+	__le32 interrupt_crb;	/* Crb to use */
 } nx_cardrsp_cds_ring_t;
 
 typedef struct {
-	u32 host_ctx_state;	/* Starting state */
-	u16 context_id;		/* Handle for context */
+	__le32 host_ctx_state;	/* Starting state */
+	__le16 context_id;		/* Handle for context */
 	u8  phys_port;		/* Physical id of port */
 	u8  virt_port;		/* Virtual/Logical id of port */
 	nx_cardrsp_cds_ring_t cds_ring;	/* Card cds settings */
@@ -1202,9 +1202,9 @@ enum {
 #define VPORT_MISS_MODE_ACCEPT_MULTI	2 /* accept unmatched multicast */
 
 typedef struct {
-	u64 qhdr;
-	u64 req_hdr;
-	u64 words[6];
+	__le64 qhdr;
+	__le64 req_hdr;
+	__le64 words[6];
 } nx_nic_req_t;
 
 typedef struct {
diff --git a/drivers/net/netxen/netxen_nic_ctx.c b/drivers/net/netxen/netxen_nic_ctx.c
index 64b51643c62..746bdb47041 100644
--- a/drivers/net/netxen/netxen_nic_ctx.c
+++ b/drivers/net/netxen/netxen_nic_ctx.c
@@ -76,7 +76,7 @@ netxen_api_unlock(struct netxen_adapter *adapter)
 static u32
 netxen_poll_rsp(struct netxen_adapter *adapter)
 {
-	u32 raw_rsp, rsp = NX_CDRP_RSP_OK;
+	u32 rsp = NX_CDRP_RSP_OK;
 	int	timeout = 0;
 
 	do {
@@ -86,10 +86,7 @@ netxen_poll_rsp(struct netxen_adapter *adapter)
 		if (++timeout > NX_OS_CRB_RETRY_COUNT)
 			return NX_CDRP_RSP_TIMEOUT;
 
-		netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET,
-				&raw_rsp);
-
-		rsp = le32_to_cpu(raw_rsp);
+		netxen_nic_read_w1(adapter, NX_CDRP_CRB_OFFSET, &rsp);
 	} while (!NX_CDRP_IS_RSP(rsp));
 
 	return rsp;
@@ -109,20 +106,16 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
 	if (netxen_api_lock(adapter))
 		return NX_RCODE_TIMEOUT;
 
-	netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET,
-			cpu_to_le32(signature));
+	netxen_nic_write_w1(adapter, NX_SIGN_CRB_OFFSET, signature);
 
-	netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET,
-			cpu_to_le32(arg1));
+	netxen_nic_write_w1(adapter, NX_ARG1_CRB_OFFSET, arg1);
 
-	netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET,
-			cpu_to_le32(arg2));
+	netxen_nic_write_w1(adapter, NX_ARG2_CRB_OFFSET, arg2);
 
-	netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET,
-			cpu_to_le32(arg3));
+	netxen_nic_write_w1(adapter, NX_ARG3_CRB_OFFSET, arg3);
 
 	netxen_nic_write_w1(adapter, NX_CDRP_CRB_OFFSET,
-			cpu_to_le32(NX_CDRP_FORM_CMD(cmd)));
+			NX_CDRP_FORM_CMD(cmd));
 
 	rsp = netxen_poll_rsp(adapter);
 
@@ -133,7 +126,6 @@ netxen_issue_cmd(struct netxen_adapter *adapter,
 		rcode = NX_RCODE_TIMEOUT;
 	} else if (rsp == NX_CDRP_RSP_FAIL) {
 		netxen_nic_read_w1(adapter, NX_ARG1_CRB_OFFSET, &rcode);
-		rcode = le32_to_cpu(rcode);
 
 		printk(KERN_ERR "%s: failed card response code:0x%x\n",
 				netxen_nic_driver_name, rcode);
@@ -183,7 +175,7 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 
 	int i, nrds_rings, nsds_rings;
 	size_t rq_size, rsp_size;
-	u32 cap, reg;
+	u32 cap, reg, val;
 
 	int err;
 
@@ -225,11 +217,14 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 
 	prq->num_rds_rings = cpu_to_le16(nrds_rings);
 	prq->num_sds_rings = cpu_to_le16(nsds_rings);
-	prq->rds_ring_offset = 0;
-	prq->sds_ring_offset = prq->rds_ring_offset +
+	prq->rds_ring_offset = cpu_to_le32(0);
+
+	val = le32_to_cpu(prq->rds_ring_offset) +
 		(sizeof(nx_hostrq_rds_ring_t) * nrds_rings);
+	prq->sds_ring_offset = cpu_to_le32(val);
 
-	prq_rds = (nx_hostrq_rds_ring_t *)(prq->data + prq->rds_ring_offset);
+	prq_rds = (nx_hostrq_rds_ring_t *)(prq->data +
+			le32_to_cpu(prq->rds_ring_offset));
 
 	for (i = 0; i < nrds_rings; i++) {
 
@@ -241,17 +236,14 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 		prq_rds[i].buff_size = cpu_to_le64(rds_ring->dma_size);
 	}
 
-	prq_sds = (nx_hostrq_sds_ring_t *)(prq->data + prq->sds_ring_offset);
+	prq_sds = (nx_hostrq_sds_ring_t *)(prq->data +
+			le32_to_cpu(prq->sds_ring_offset));
 
 	prq_sds[0].host_phys_addr =
 		cpu_to_le64(recv_ctx->rcv_status_desc_phys_addr);
 	prq_sds[0].ring_size = cpu_to_le32(adapter->max_rx_desc_count);
 	/* only one msix vector for now */
-	prq_sds[0].msi_index = cpu_to_le32(0);
-
-	/* now byteswap offsets */
-	prq->rds_ring_offset = cpu_to_le32(prq->rds_ring_offset);
-	prq->sds_ring_offset = cpu_to_le32(prq->sds_ring_offset);
+	prq_sds[0].msi_index = cpu_to_le16(0);
 
 	phys_addr = hostrq_phys_addr;
 	err = netxen_issue_cmd(adapter,
@@ -269,9 +261,9 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 
 
 	prsp_rds = ((nx_cardrsp_rds_ring_t *)
-			 &prsp->data[prsp->rds_ring_offset]);
+			 &prsp->data[le32_to_cpu(prsp->rds_ring_offset)]);
 
-	for (i = 0; i < le32_to_cpu(prsp->num_rds_rings); i++) {
+	for (i = 0; i < le16_to_cpu(prsp->num_rds_rings); i++) {
 		rds_ring = &recv_ctx->rds_rings[i];
 
 		reg = le32_to_cpu(prsp_rds[i].host_producer_crb);
@@ -279,7 +271,7 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 	}
 
 	prsp_sds = ((nx_cardrsp_sds_ring_t *)
-			&prsp->data[prsp->sds_ring_offset]);
+			&prsp->data[le32_to_cpu(prsp->sds_ring_offset)]);
 	reg = le32_to_cpu(prsp_sds[0].host_consumer_crb);
 	recv_ctx->crb_sts_consumer = NETXEN_NIC_REG(reg - 0x200);
 
@@ -288,7 +280,7 @@ nx_fw_cmd_create_rx_ctx(struct netxen_adapter *adapter)
 
 	recv_ctx->state = le32_to_cpu(prsp->host_ctx_state);
 	recv_ctx->context_id = le16_to_cpu(prsp->context_id);
-	recv_ctx->virt_port = le16_to_cpu(prsp->virt_port);
+	recv_ctx->virt_port = prsp->virt_port;
 
 out_free_rsp:
 	pci_free_consistent(adapter->pdev, rsp_size, prsp, cardrsp_phys_addr);
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index aa6e603bfcb..e8a0eed0078 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -539,16 +539,19 @@ static int nx_p3_sre_macaddr_change(struct net_device *dev,
 {
 	struct netxen_adapter *adapter = netdev_priv(dev);
 	nx_nic_req_t req;
-	nx_mac_req_t mac_req;
+	nx_mac_req_t *mac_req;
+	u64 word;
 	int rv;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
-	req.qhdr |= (NX_NIC_REQUEST << 23);
-	req.req_hdr |= NX_MAC_EVENT;
-	req.req_hdr |= ((u64)adapter->portnum << 16);
-	mac_req.op = op;
-	memcpy(&mac_req.mac_addr, addr, 6);
-	req.words[0] = cpu_to_le64(*(u64 *)&mac_req);
+	req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
+
+	word = NX_MAC_EVENT | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
+	mac_req = (nx_mac_req_t *)&req.words[0];
+	mac_req->op = op;
+	memcpy(mac_req->mac_addr, addr, 6);
 
 	rv = netxen_send_cmd_descs(adapter, (struct cmd_desc_type0 *)&req, 1);
 	if (rv != 0) {
@@ -612,12 +615,16 @@ send_fw_cmd:
 int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 {
 	nx_nic_req_t req;
+	u64 word;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
 
-	req.qhdr |= (NX_HOST_REQUEST << 23);
-	req.req_hdr |= NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE;
-	req.req_hdr |= ((u64)adapter->portnum << 16);
+	req.qhdr = cpu_to_le64(NX_HOST_REQUEST << 23);
+
+	word = NX_NIC_H2C_OPCODE_PROXY_SET_VPORT_MISS_MODE |
+			((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
+
 	req.words[0] = cpu_to_le64(mode);
 
 	return netxen_send_cmd_descs(adapter,
@@ -632,13 +639,15 @@ int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter)
 {
 	nx_nic_req_t req;
+	u64 word;
 	int rv;
 
 	memset(&req, 0, sizeof(nx_nic_req_t));
 
-	req.qhdr |= (NX_NIC_REQUEST << 23);
-	req.req_hdr |= NETXEN_CONFIG_INTR_COALESCE;
-	req.req_hdr |= ((u64)adapter->portnum << 16);
+	req.qhdr = cpu_to_le64(NX_NIC_REQUEST << 23);
+
+	word = NETXEN_CONFIG_INTR_COALESCE | ((u64)adapter->portnum << 16);
+	req.req_hdr = cpu_to_le64(word);
 
 	memcpy(&req.words[0], &adapter->coal, sizeof(adapter->coal));
 
@@ -772,13 +781,10 @@ int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
 	adapter->hw_read_wx(adapter, crbaddr, &mac_lo, 4);
 	adapter->hw_read_wx(adapter, crbaddr+4, &mac_hi, 4);
 
-	mac_hi = cpu_to_le32(mac_hi);
-	mac_lo = cpu_to_le32(mac_lo);
-
 	if (pci_func & 1)
-		*mac = ((mac_lo >> 16) | ((u64)mac_hi << 16));
+		*mac = le64_to_cpu((mac_lo >> 16) | ((u64)mac_hi << 16));
 	else
-		*mac = ((mac_lo) | ((u64)mac_hi << 32));
+		*mac = le64_to_cpu((u64)mac_lo | ((u64)mac_hi << 32));
 
 	return 0;
 }
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index d924468e506..c0e06a65317 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -1277,7 +1277,7 @@ static void netxen_process_rcv(struct netxen_adapter *adapter, int ctxid,
 
 		dev_kfree_skb_any(skb);
 		for (i = 0; i < nr_frags; i++) {
-			index = frag_desc->frag_handles[i];
+			index = le16_to_cpu(frag_desc->frag_handles[i]);
 			skb = netxen_process_rxbuf(adapter,
 					rds_ring, index, cksum);
 			if (skb)
-- 
GitLab


From 391587c3447d99b842a647f8e701895c9eea050b Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Wed, 14 Jan 2009 20:48:11 -0800
Subject: [PATCH 379/492] netxen: fix ipv6 offload and tx cleanup

o fix the ip/tcp hdr offset in tx descriptors for ipv6.
o cleanup xmit function, move the tso checks into separate function,
  this reduces unnecessary endian conversions back and forth.
o optimize macros to initialize tx descriptors.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic.h      |  43 ++++--------
 drivers/net/netxen/netxen_nic_hw.c   |   4 --
 drivers/net/netxen/netxen_nic_main.c | 101 ++++++++++++---------------
 3 files changed, 57 insertions(+), 91 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 31311cc66d1..acb2ac971ca 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -308,27 +308,16 @@ struct netxen_ring_ctx {
 #define netxen_set_cmd_desc_ctxid(cmd_desc, var)	\
 	((cmd_desc)->port_ctxid |= ((var) << 4 & 0xF0))
 
-#define netxen_set_cmd_desc_flags(cmd_desc, val)	\
-	(cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
-		~cpu_to_le16(0x7f)) | cpu_to_le16((val) & 0x7f)
-#define netxen_set_cmd_desc_opcode(cmd_desc, val)	\
-	(cmd_desc)->flags_opcode = ((cmd_desc)->flags_opcode & \
-		~cpu_to_le16((u16)0x3f << 7)) | cpu_to_le16(((val) & 0x3f) << 7)
-
-#define netxen_set_cmd_desc_num_of_buff(cmd_desc, val)	\
-	(cmd_desc)->num_of_buffers_total_length = \
-		((cmd_desc)->num_of_buffers_total_length & \
-		~cpu_to_le32(0xff)) | cpu_to_le32((val) & 0xff)
-#define netxen_set_cmd_desc_totallength(cmd_desc, val)	\
-	(cmd_desc)->num_of_buffers_total_length = \
-		((cmd_desc)->num_of_buffers_total_length & \
-		~cpu_to_le32((u32)0xffffff << 8)) | \
-		cpu_to_le32(((val) & 0xffffff) << 8)
-
-#define netxen_get_cmd_desc_opcode(cmd_desc)	\
-	((le16_to_cpu((cmd_desc)->flags_opcode) >> 7) & 0x003f)
-#define netxen_get_cmd_desc_totallength(cmd_desc)	\
-	((le32_to_cpu((cmd_desc)->num_of_buffers_total_length) >> 8) & 0xffffff)
+#define netxen_set_tx_port(_desc, _port) \
+	(_desc)->port_ctxid = ((_port) & 0xf) | (((_port) << 4) & 0xf0)
+
+#define netxen_set_tx_flags_opcode(_desc, _flags, _opcode) \
+	(_desc)->flags_opcode = \
+	cpu_to_le16(((_flags) & 0x7f) | (((_opcode) & 0x3f) << 7))
+
+#define netxen_set_tx_frags_len(_desc, _frags, _len) \
+	(_desc)->num_of_buffers_total_length = \
+	cpu_to_le32(((_frags) & 0xff) | (((_len) & 0xffffff) << 8))
 
 struct cmd_desc_type0 {
 	u8 tcp_hdr_offset;	/* For LSO only */
@@ -757,7 +746,7 @@ extern char netxen_nic_driver_name[];
  */
 struct netxen_skb_frag {
 	u64 dma;
-	u32 length;
+	ulong length;
 };
 
 #define _netxen_set_bits(config_word, start, bits, val)	{\
@@ -783,13 +772,7 @@ struct netxen_skb_frag {
 struct netxen_cmd_buffer {
 	struct sk_buff *skb;
 	struct netxen_skb_frag frag_array[MAX_BUFFERS_PER_CMD + 1];
-	u32 total_length;
-	u32 mss;
-	u16 port;
-	u8 cmd;
-	u8 frag_count;
-	unsigned long time_stamp;
-	u32 state;
+	u32 frag_count;
 };
 
 /* In rx_buffer, we do not need multiple fragments as is a single buffer */
@@ -1486,8 +1469,6 @@ void netxen_release_tx_buffers(struct netxen_adapter *adapter);
 
 void netxen_initialize_adapter_ops(struct netxen_adapter *adapter);
 int netxen_init_firmware(struct netxen_adapter *adapter);
-void netxen_tso_check(struct netxen_adapter *adapter,
-		      struct cmd_desc_type0 *desc, struct sk_buff *skb);
 void netxen_nic_clear_stats(struct netxen_adapter *adapter);
 void netxen_watchdog_task(struct work_struct *work);
 void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx,
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index e8a0eed0078..98d0bcda5f4 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -508,12 +508,8 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 		cmd_desc = &cmd_desc_arr[i];
 
 		pbuf = &adapter->cmd_buf_arr[producer];
-		pbuf->mss = 0;
-		pbuf->total_length = 0;
 		pbuf->skb = NULL;
-		pbuf->cmd = 0;
 		pbuf->frag_count = 0;
-		pbuf->port = 0;
 
 		/* adapter->ahw.cmd_desc_head[producer] = *cmd_desc; */
 		memcpy(&adapter->ahw.cmd_desc_head[producer],
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index ba01524b553..cb391238180 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -39,6 +39,7 @@
 #include "netxen_nic_phan_reg.h"
 
 #include <linux/dma-mapping.h>
+#include <linux/if_vlan.h>
 #include <net/ip.h>
 
 MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
@@ -1137,29 +1138,46 @@ static int netxen_nic_close(struct net_device *netdev)
 	return 0;
 }
 
-void netxen_tso_check(struct netxen_adapter *adapter,
+static bool netxen_tso_check(struct net_device *netdev,
 		      struct cmd_desc_type0 *desc, struct sk_buff *skb)
 {
-	if (desc->mss) {
-		desc->total_hdr_length = (sizeof(struct ethhdr) +
-					  ip_hdrlen(skb) + tcp_hdrlen(skb));
+	bool tso = false;
+	u8 opcode = TX_ETHER_PKT;
 
-		if ((NX_IS_REVISION_P3(adapter->ahw.revision_id)) &&
-				(skb->protocol == htons(ETH_P_IPV6)))
-			netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO6);
-		else
-			netxen_set_cmd_desc_opcode(desc, TX_TCP_LSO);
+	if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
+			skb_shinfo(skb)->gso_size > 0) {
+
+		desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
+		desc->total_hdr_length =
+			skb_transport_offset(skb) + tcp_hdrlen(skb);
+
+		opcode = (skb->protocol == htons(ETH_P_IPV6)) ?
+				TX_TCP_LSO6 : TX_TCP_LSO;
+		tso = true;
 
 	} else if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		if (ip_hdr(skb)->protocol == IPPROTO_TCP)
-			netxen_set_cmd_desc_opcode(desc, TX_TCP_PKT);
-		else if (ip_hdr(skb)->protocol == IPPROTO_UDP)
-			netxen_set_cmd_desc_opcode(desc, TX_UDP_PKT);
-		else
-			return;
+		u8 l4proto;
+
+		if (skb->protocol == htons(ETH_P_IP)) {
+			l4proto = ip_hdr(skb)->protocol;
+
+			if (l4proto == IPPROTO_TCP)
+				opcode = TX_TCP_PKT;
+			else if(l4proto == IPPROTO_UDP)
+				opcode = TX_UDP_PKT;
+		} else if (skb->protocol == htons(ETH_P_IPV6)) {
+			l4proto = ipv6_hdr(skb)->nexthdr;
+
+			if (l4proto == IPPROTO_TCP)
+				opcode = TX_TCPV6_PKT;
+			else if(l4proto == IPPROTO_UDP)
+				opcode = TX_UDPV6_PKT;
+		}
 	}
 	desc->tcp_hdr_offset = skb_transport_offset(skb);
 	desc->ip_hdr_offset = skb_network_offset(skb);
+	netxen_set_tx_flags_opcode(desc, 0, opcode);
+	return tso;
 }
 
 static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
@@ -1167,33 +1185,20 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	struct netxen_adapter *adapter = netdev_priv(netdev);
 	struct netxen_hardware_context *hw = &adapter->ahw;
 	unsigned int first_seg_len = skb->len - skb->data_len;
+	struct netxen_cmd_buffer *pbuf;
 	struct netxen_skb_frag *buffrag;
-	unsigned int i;
+	struct cmd_desc_type0 *hwdesc;
+	int i, k;
 
 	u32 producer, consumer;
-	u32 saved_producer = 0;
-	struct cmd_desc_type0 *hwdesc;
-	int k;
-	struct netxen_cmd_buffer *pbuf = NULL;
-	int frag_count;
-	int no_of_desc;
+	int frag_count, no_of_desc;
 	u32 num_txd = adapter->max_tx_desc_count;
+	bool is_tso = false;
 
 	frag_count = skb_shinfo(skb)->nr_frags + 1;
 
 	/* There 4 fragments per descriptor */
 	no_of_desc = (frag_count + 3) >> 2;
-	if (netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) {
-		if (skb_shinfo(skb)->gso_size > 0) {
-
-			no_of_desc++;
-			if ((ip_hdrlen(skb) + tcp_hdrlen(skb) +
-			     sizeof(struct ethhdr)) >
-			    (sizeof(struct cmd_desc_type0) - 2)) {
-				no_of_desc++;
-			}
-		}
-	}
 
 	producer = adapter->cmd_producer;
 	smp_mb();
@@ -1205,34 +1210,22 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	}
 
 	/* Copy the descriptors into the hardware    */
-	saved_producer = producer;
 	hwdesc = &hw->cmd_desc_head[producer];
 	memset(hwdesc, 0, sizeof(struct cmd_desc_type0));
 	/* Take skb->data itself */
 	pbuf = &adapter->cmd_buf_arr[producer];
-	if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) &&
-			skb_shinfo(skb)->gso_size > 0) {
-		pbuf->mss = skb_shinfo(skb)->gso_size;
-		hwdesc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size);
-	} else {
-		pbuf->mss = 0;
-		hwdesc->mss = 0;
-	}
-	pbuf->total_length = skb->len;
+
+	is_tso = netxen_tso_check(netdev, hwdesc, skb);
+
 	pbuf->skb = skb;
-	pbuf->cmd = TX_ETHER_PKT;
 	pbuf->frag_count = frag_count;
-	pbuf->port = adapter->portnum;
 	buffrag = &pbuf->frag_array[0];
 	buffrag->dma = pci_map_single(adapter->pdev, skb->data, first_seg_len,
 				      PCI_DMA_TODEVICE);
 	buffrag->length = first_seg_len;
-	netxen_set_cmd_desc_totallength(hwdesc, skb->len);
-	netxen_set_cmd_desc_num_of_buff(hwdesc, frag_count);
-	netxen_set_cmd_desc_opcode(hwdesc, TX_ETHER_PKT);
+	netxen_set_tx_frags_len(hwdesc, frag_count, skb->len);
+	netxen_set_tx_port(hwdesc, adapter->portnum);
 
-	netxen_set_cmd_desc_port(hwdesc, adapter->portnum);
-	netxen_set_cmd_desc_ctxid(hwdesc, adapter->portnum);
 	hwdesc->buffer1_length = cpu_to_le16(first_seg_len);
 	hwdesc->addr_buffer1 = cpu_to_le64(buffrag->dma);
 
@@ -1285,16 +1278,12 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	}
 	producer = get_next_index(producer, num_txd);
 
-	/* might change opcode to TX_TCP_LSO */
-	netxen_tso_check(adapter, &hw->cmd_desc_head[saved_producer], skb);
-
 	/* For LSO, we need to copy the MAC/IP/TCP headers into
 	 * the descriptor ring
 	 */
-	if (netxen_get_cmd_desc_opcode(&hw->cmd_desc_head[saved_producer])
-	    == TX_TCP_LSO) {
+	if (is_tso) {
 		int hdr_len, first_hdr_len, more_hdr;
-		hdr_len = hw->cmd_desc_head[saved_producer].total_hdr_length;
+		hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		if (hdr_len > (sizeof(struct cmd_desc_type0) - 2)) {
 			first_hdr_len = sizeof(struct cmd_desc_type0) - 2;
 			more_hdr = 1;
-- 
GitLab


From c7860a2aec571ea95d3ad19b8d9775b27828baac Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Wed, 14 Jan 2009 20:48:32 -0800
Subject: [PATCH 380/492] netxen: fix link speed reporting for some boards

o Read negotiated link speed when link state changes.
o Fix link speed reporting for hybrid nic boards, which have both 1Gbps and
  10Gbps ports.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic.h         |  3 ++-
 drivers/net/netxen/netxen_nic_ethtool.c | 31 ++++++++++++++++++-------
 drivers/net/netxen/netxen_nic_hw.c      | 28 +++++++++++++++-------
 drivers/net/netxen/netxen_nic_main.c    | 14 ++++++++++-
 4 files changed, 58 insertions(+), 18 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index acb2ac971ca..a674a23f72b 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -499,7 +499,8 @@ typedef enum {
 	NETXEN_BRDTYPE_P3_10G_SFP_CT = 0x002a,
 	NETXEN_BRDTYPE_P3_10G_SFP_QT = 0x002b,
 	NETXEN_BRDTYPE_P3_10G_CX4 = 0x0031,
-	NETXEN_BRDTYPE_P3_10G_XFP = 0x0032
+	NETXEN_BRDTYPE_P3_10G_XFP = 0x0032,
+	NETXEN_BRDTYPE_P3_10G_TP = 0x0080
 
 } netxen_brdtype_t;
 
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index e45ce295172..c0bd40fcf70 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -136,11 +136,9 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
 		ecmd->port = PORT_TP;
 
-		if (netif_running(dev)) {
-			ecmd->speed = adapter->link_speed;
-			ecmd->duplex = adapter->link_duplex;
-			ecmd->autoneg = adapter->link_autoneg;
-		}
+		ecmd->speed = adapter->link_speed;
+		ecmd->duplex = adapter->link_duplex;
+		ecmd->autoneg = adapter->link_autoneg;
 
 	} else if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
 		u32 val;
@@ -171,7 +169,7 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	} else
 		return -EIO;
 
-	ecmd->phy_address = adapter->portnum;
+	ecmd->phy_address = adapter->physical_port;
 	ecmd->transceiver = XCVR_EXTERNAL;
 
 	switch ((netxen_brdtype_t) boardinfo->board_type) {
@@ -180,13 +178,13 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	case NETXEN_BRDTYPE_P3_REF_QG:
 	case NETXEN_BRDTYPE_P3_4_GB:
 	case NETXEN_BRDTYPE_P3_4_GB_MM:
-	case NETXEN_BRDTYPE_P3_10000_BASE_T:
 
 		ecmd->supported |= SUPPORTED_Autoneg;
 		ecmd->advertising |= ADVERTISED_Autoneg;
 	case NETXEN_BRDTYPE_P2_SB31_10G_CX4:
 	case NETXEN_BRDTYPE_P3_10G_CX4:
 	case NETXEN_BRDTYPE_P3_10G_CX4_LP:
+	case NETXEN_BRDTYPE_P3_10000_BASE_T:
 		ecmd->supported |= SUPPORTED_TP;
 		ecmd->advertising |= ADVERTISED_TP;
 		ecmd->port = PORT_TP;
@@ -204,16 +202,33 @@ netxen_nic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 		ecmd->port = PORT_FIBRE;
 		ecmd->autoneg = AUTONEG_DISABLE;
 		break;
-	case NETXEN_BRDTYPE_P2_SB31_10G:
 	case NETXEN_BRDTYPE_P3_10G_SFP_PLUS:
 	case NETXEN_BRDTYPE_P3_10G_SFP_CT:
 	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
+		ecmd->advertising |= ADVERTISED_TP;
+		ecmd->supported |= SUPPORTED_TP;
+	case NETXEN_BRDTYPE_P2_SB31_10G:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 		ecmd->supported |= SUPPORTED_FIBRE;
 		ecmd->advertising |= ADVERTISED_FIBRE;
 		ecmd->port = PORT_FIBRE;
 		ecmd->autoneg = AUTONEG_DISABLE;
 		break;
+	case NETXEN_BRDTYPE_P3_10G_TP:
+		if (adapter->ahw.board_type == NETXEN_NIC_XGBE) {
+			ecmd->autoneg = AUTONEG_DISABLE;
+			ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
+			ecmd->advertising |=
+				(ADVERTISED_FIBRE | ADVERTISED_TP);
+			ecmd->port = PORT_FIBRE;
+		} else {
+			ecmd->autoneg = AUTONEG_ENABLE;
+			ecmd->supported |= (SUPPORTED_TP |SUPPORTED_Autoneg);
+			ecmd->advertising |=
+				(ADVERTISED_TP | ADVERTISED_Autoneg);
+			ecmd->port = PORT_TP;
+		}
+		break;
 	default:
 		printk(KERN_ERR "netxen-nic: Unsupported board model %d\n",
 		       (netxen_brdtype_t) boardinfo->board_type);
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 98d0bcda5f4..4276f7f8223 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -2036,7 +2036,13 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 		rv = -1;
 	}
 
-	DPRINTK(INFO, "Discovered board type:0x%x  ", boardinfo->board_type);
+	if (boardinfo->board_type == NETXEN_BRDTYPE_P3_4_GB_MM) {
+		u32 gpio = netxen_nic_reg_read(adapter,
+				NETXEN_ROMUSB_GLB_PAD_GPIO_I);
+		if ((gpio & 0x8000) == 0)
+			boardinfo->board_type = NETXEN_BRDTYPE_P3_10G_TP;
+	}
+
 	switch ((netxen_brdtype_t) boardinfo->board_type) {
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 		adapter->ahw.board_type = NETXEN_NIC_GBE;
@@ -2055,7 +2061,6 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 	case NETXEN_BRDTYPE_P3_10G_SFP_QT:
 	case NETXEN_BRDTYPE_P3_10G_XFP:
 	case NETXEN_BRDTYPE_P3_10000_BASE_T:
-
 		adapter->ahw.board_type = NETXEN_NIC_XGBE;
 		break;
 	case NETXEN_BRDTYPE_P1_BD:
@@ -2065,9 +2070,12 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 	case NETXEN_BRDTYPE_P3_REF_QG:
 	case NETXEN_BRDTYPE_P3_4_GB:
 	case NETXEN_BRDTYPE_P3_4_GB_MM:
-
 		adapter->ahw.board_type = NETXEN_NIC_GBE;
 		break;
+	case NETXEN_BRDTYPE_P3_10G_TP:
+		adapter->ahw.board_type = (adapter->portnum < 2) ?
+			NETXEN_NIC_XGBE : NETXEN_NIC_GBE;
+		break;
 	default:
 		printk("%s: Unknown(%x)\n", netxen_nic_driver_name,
 		       boardinfo->board_type);
@@ -2112,12 +2120,16 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 {
 	__u32 status;
 	__u32 autoneg;
-	__u32 mode;
 	__u32 port_mode;
 
-	netxen_nic_read_w0(adapter, NETXEN_NIU_MODE, &mode);
-	if (netxen_get_niu_enable_ge(mode)) {	/* Gb 10/100/1000 Mbps mode */
+	if (!netif_carrier_ok(adapter->netdev)) {
+		adapter->link_speed   = 0;
+		adapter->link_duplex  = -1;
+		adapter->link_autoneg = AUTONEG_ENABLE;
+		return;
+	}
 
+	if (adapter->ahw.board_type == NETXEN_NIC_GBE) {
 		adapter->hw_read_wx(adapter,
 				NETXEN_PORT_MODE_ADDR, &port_mode, 4);
 		if (port_mode == NETXEN_PORT_MODE_802_3_AP) {
@@ -2143,7 +2155,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 					adapter->link_speed = SPEED_1000;
 					break;
 				default:
-					adapter->link_speed = -1;
+					adapter->link_speed = 0;
 					break;
 				}
 				switch (netxen_get_phy_duplex(status)) {
@@ -2166,7 +2178,7 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter)
 				goto link_down;
 		} else {
 		      link_down:
-			adapter->link_speed = -1;
+			adapter->link_speed = 0;
 			adapter->link_duplex = -1;
 		}
 	}
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index cb391238180..2c6ce6ffde0 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -243,7 +243,7 @@ static void netxen_check_options(struct netxen_adapter *adapter)
 	case NETXEN_BRDTYPE_P3_4_GB:
 	case NETXEN_BRDTYPE_P3_4_GB_MM:
 		adapter->msix_supported = !!use_msi_x;
-		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
 		break;
 
 	case NETXEN_BRDTYPE_P2_SB35_4G:
@@ -252,6 +252,14 @@ static void netxen_check_options(struct netxen_adapter *adapter)
 		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
 		break;
 
+	case NETXEN_BRDTYPE_P3_10G_TP:
+		adapter->msix_supported = !!use_msi_x;
+		if (adapter->ahw.board_type == NETXEN_NIC_XGBE)
+			adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_10G;
+		else
+			adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
+		break;
+
 	default:
 		adapter->msix_supported = 0;
 		adapter->max_rx_desc_count = MAX_RCV_DESCRIPTORS_1G;
@@ -1396,6 +1404,8 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
 			netif_carrier_off(netdev);
 			netif_stop_queue(netdev);
 		}
+
+		netxen_nic_set_link_parameters(adapter);
 	} else if (!adapter->ahw.linkup && linkup) {
 		printk(KERN_INFO "%s: %s NIC Link is up\n",
 		       netxen_nic_driver_name, netdev->name);
@@ -1404,6 +1414,8 @@ static void netxen_nic_handle_phy_intr(struct netxen_adapter *adapter)
 			netif_carrier_on(netdev);
 			netif_wake_queue(netdev);
 		}
+
+		netxen_nic_set_link_parameters(adapter);
 	}
 }
 
-- 
GitLab


From 27c915a4d843b90eb4065298969578d15e5e6ab0 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Wed, 14 Jan 2009 20:49:00 -0800
Subject: [PATCH 381/492] netxen: firmware init fix

o Fix order or rom register writes.
o Reduce udelays when writing rom registers.

This cuts the firmware init time by 40%.

o Do not reset core/memory clocks when reinitializing driver.
  Firmware willl handle this when initialized.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_hw.c   |  6 ++--
 drivers/net/netxen/netxen_nic_init.c | 35 ++++++++++++---------
 drivers/net/netxen/netxen_nic_main.c | 47 +++++++++++++++++-----------
 3 files changed, 51 insertions(+), 37 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 4276f7f8223..511db2ac57c 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -939,7 +939,7 @@ int netxen_load_firmware(struct netxen_adapter *adapter)
 {
 	int i;
 	u32 data, size = 0;
-	u32 flashaddr = NETXEN_BOOTLD_START, memaddr = NETXEN_BOOTLD_START;
+	u32 flashaddr = NETXEN_BOOTLD_START;
 
 	size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START)/4;
 
@@ -951,10 +951,8 @@ int netxen_load_firmware(struct netxen_adapter *adapter)
 		if (netxen_rom_fast_read(adapter, flashaddr, (int *)&data) != 0)
 			return -EIO;
 
-		adapter->pci_mem_write(adapter, memaddr, &data, 4);
+		adapter->pci_mem_write(adapter, flashaddr, &data, 4);
 		flashaddr += 4;
-		memaddr += 4;
-		cond_resched();
 	}
 	msleep(1);
 
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index c0e06a65317..a3203644b48 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -439,6 +439,8 @@ static int netxen_wait_rom_done(struct netxen_adapter *adapter)
 	long timeout = 0;
 	long done = 0;
 
+	cond_resched();
+
 	while (done == 0) {
 		done = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_GLB_STATUS);
 		done &= 2;
@@ -533,12 +535,9 @@ static int do_rom_fast_write(struct netxen_adapter *adapter, int addr,
 static int do_rom_fast_read(struct netxen_adapter *adapter,
 			    int addr, int *valp)
 {
-	cond_resched();
-
 	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
-	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
-	udelay(100);		/* prevent bursting on CRB */
 	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
+	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
 	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
 	if (netxen_wait_rom_done(adapter)) {
 		printk("Error waiting for rom done\n");
@@ -546,7 +545,7 @@ static int do_rom_fast_read(struct netxen_adapter *adapter,
 	}
 	/* reset abyte_cnt and dummy_byte_cnt */
 	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
-	udelay(100);		/* prevent bursting on CRB */
+	udelay(10);
 	netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
 
 	*valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA);
@@ -884,14 +883,16 @@ int netxen_flash_unlock(struct netxen_adapter *adapter)
 int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 {
 	int addr, val;
-	int i, init_delay = 0;
+	int i, n, init_delay = 0;
 	struct crb_addr_pair *buf;
-	unsigned offset, n;
+	unsigned offset;
 	u32 off;
 
 	/* resetall */
+	rom_lock(adapter);
 	netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET,
 				    0xffffffff);
+	netxen_rom_unlock(adapter);
 
 	if (verbose) {
 		if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
@@ -910,7 +911,7 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
-			(n != 0xcafecafeUL) ||
+			(n != 0xcafecafe) ||
 			netxen_rom_fast_read(adapter, 4, &n) != 0) {
 			printk(KERN_ERR "%s: ERROR Reading crb_init area: "
 					"n: %08x\n", netxen_nic_driver_name, n);
@@ -975,6 +976,14 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 			/* do not reset PCI */
 			if (off == (ROMUSB_GLB + 0xbc))
 				continue;
+			if (off == (ROMUSB_GLB + 0xa8))
+				continue;
+			if (off == (ROMUSB_GLB + 0xc8)) /* core clock */
+				continue;
+			if (off == (ROMUSB_GLB + 0x24)) /* MN clock */
+				continue;
+			if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
+				continue;
 			if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
 				buf[i].data = 0x1020;
 			/* skip the function enable register */
@@ -992,23 +1001,21 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
 			continue;
 		}
 
+		init_delay = 1;
 		/* After writing this register, HW needs time for CRB */
 		/* to quiet down (else crb_window returns 0xffffffff) */
 		if (off == NETXEN_ROMUSB_GLB_SW_RESET) {
-			init_delay = 1;
+			init_delay = 1000;
 			if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
 				/* hold xdma in reset also */
 				buf[i].data = NETXEN_NIC_XDMA_RESET;
+				buf[i].data = 0x8000ff;
 			}
 		}
 
 		adapter->hw_write_wx(adapter, off, &buf[i].data, 4);
 
-		if (init_delay == 1) {
-			msleep(1000);
-			init_delay = 0;
-		}
-		msleep(1);
+		msleep(init_delay);
 	}
 	kfree(buf);
 
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 2c6ce6ffde0..cbe2b3e814d 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -280,10 +280,15 @@ static void netxen_check_options(struct netxen_adapter *adapter)
 static int
 netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
 {
-	int ret = 0;
+	u32 val, timeout;
 
 	if (first_boot == 0x55555555) {
 		/* This is the first boot after power up */
+		adapter->pci_write_normalize(adapter,
+			NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
+
+		if (!NX_IS_REVISION_P2(adapter->ahw.revision_id))
+			return 0;
 
 		/* PCI bus master workaround */
 		adapter->hw_read_wx(adapter,
@@ -303,18 +308,26 @@ netxen_check_hw_init(struct netxen_adapter *adapter, int first_boot)
 			/* clear the register for future unloads/loads */
 			adapter->pci_write_normalize(adapter,
 					NETXEN_CAM_RAM(0x1fc), 0);
-			ret = -1;
+			return -EIO;
 		}
 
-		if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-			/* Start P2 boot loader */
-			adapter->pci_write_normalize(adapter,
-				NETXEN_CAM_RAM(0x1fc), NETXEN_BDINFO_MAGIC);
-			adapter->pci_write_normalize(adapter,
-					NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
-		}
+		/* Start P2 boot loader */
+		val = adapter->pci_read_normalize(adapter,
+				NETXEN_ROMUSB_GLB_PEGTUNE_DONE);
+		adapter->pci_write_normalize(adapter,
+				NETXEN_ROMUSB_GLB_PEGTUNE_DONE, val | 0x1);
+		timeout = 0;
+		do {
+			msleep(1);
+			val = adapter->pci_read_normalize(adapter,
+					NETXEN_CAM_RAM(0x1fc));
+
+			if (++timeout > 5000)
+				return -EIO;
+
+		} while (val == NETXEN_BDINFO_MAGIC);
 	}
-	return ret;
+	return 0;
 }
 
 static void netxen_set_port_mode(struct netxen_adapter *adapter)
@@ -793,8 +806,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 						CRB_CMDPEG_STATE, 0);
 			netxen_pinit_from_rom(adapter, 0);
 			msleep(1);
-			netxen_load_firmware(adapter);
 		}
+		netxen_load_firmware(adapter);
 
 		if (NX_IS_REVISION_P3(revision_id))
 			netxen_pcie_strap_init(adapter);
@@ -810,13 +823,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 		}
 
-		if ((first_boot == 0x55555555) &&
-			(NX_IS_REVISION_P2(revision_id))) {
-			/* Unlock the HW, prompting the boot sequence */
-			adapter->pci_write_normalize(adapter,
-					NETXEN_ROMUSB_GLB_PEGTUNE_DONE, 1);
-		}
-
 		err = netxen_initialize_adapter_offload(adapter);
 		if (err)
 			goto err_out_iounmap;
@@ -830,7 +836,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		adapter->pci_write_normalize(adapter, CRB_DRIVER_VERSION, i);
 
 		/* Handshake with the card before we register the devices. */
-		netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+		err = netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE);
+		if (err)
+			goto err_out_free_offload;
 
 	}	/* first_driver */
 
@@ -934,6 +942,7 @@ err_out_disable_msi:
 	if (adapter->flags & NETXEN_NIC_MSI_ENABLED)
 		pci_disable_msi(pdev);
 
+err_out_free_offload:
 	if (first_driver)
 		netxen_free_adapter_offload(adapter);
 
-- 
GitLab


From 06e9d9f9783860fe4c602ef491f47211804ccc96 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Wed, 14 Jan 2009 20:49:22 -0800
Subject: [PATCH 382/492] netxen: cleanup mac list on driver unload

This fixes a tiny memory leak when driver is unloaded. The mac
address list maintained in netxen_adapter needs to deleted when
driver is going down.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic.h      |  1 +
 drivers/net/netxen/netxen_nic_hw.c   | 13 +++++++++++++
 drivers/net/netxen/netxen_nic_main.c |  3 +++
 3 files changed, 17 insertions(+)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index a674a23f72b..6598a34b87d 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1478,6 +1478,7 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter);
 u32 netxen_process_rcv_ring(struct netxen_adapter *adapter, int ctx, int max);
 void netxen_p2_nic_set_multi(struct net_device *netdev);
 void netxen_p3_nic_set_multi(struct net_device *netdev);
+void netxen_p3_free_mac_list(struct netxen_adapter *adapter);
 int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32);
 int netxen_config_intr_coalesce(struct netxen_adapter *adapter);
 
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 511db2ac57c..e2d2a2fdbe1 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -627,6 +627,19 @@ int netxen_p3_nic_set_promisc(struct netxen_adapter *adapter, u32 mode)
 				(struct cmd_desc_type0 *)&req, 1);
 }
 
+void netxen_p3_free_mac_list(struct netxen_adapter *adapter)
+{
+	nx_mac_list_t *cur, *next;
+
+	cur = adapter->mac_list;
+
+	while (cur) {
+		next = cur->next;
+		kfree(cur);
+		cur = next;
+	}
+}
+
 #define	NETXEN_CONFIG_INTR_COALESCE	3
 
 /*
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index cbe2b3e814d..9268fd2fbac 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -986,6 +986,9 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 		netxen_free_hw_resources(adapter);
 		netxen_release_rx_buffers(adapter);
 		netxen_free_sw_resources(adapter);
+
+		if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+			netxen_p3_free_mac_list(adapter);
 	}
 
 	if (adapter->portnum == 0)
-- 
GitLab


From 03e678ee968ae54b79c1580c2935895bd863ad95 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Wed, 14 Jan 2009 20:49:43 -0800
Subject: [PATCH 383/492] netxen: hold tx lock while sending firmware commands

Some firmware commands like mac address addition/deletion are sent
on the transmit ring. So need to hold the tx lock before touching
tx producer/consumer indices.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic_hw.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index e2d2a2fdbe1..821cff68b3f 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -503,6 +503,8 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 
 	i = 0;
 
+	netif_tx_lock_bh(adapter->netdev);
+
 	producer = adapter->cmd_producer;
 	do {
 		cmd_desc = &cmd_desc_arr[i];
@@ -527,6 +529,8 @@ netxen_send_cmd_descs(struct netxen_adapter *adapter,
 
 	netxen_nic_update_cmd_producer(adapter, adapter->cmd_producer);
 
+	netif_tx_unlock_bh(adapter->netdev);
+
 	return 0;
 }
 
-- 
GitLab


From 6f70340698333f14b1d9c9e913c5de8f66b72c55 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Wed, 14 Jan 2009 20:50:00 -0800
Subject: [PATCH 384/492] netxen: handle dma mapping failures

o Bail out if pci_map_single() fails while replenishing rx ring.
o Drop packet if pci_map_{single,page}() fail in tx.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/netxen/netxen_nic.h      |  1 -
 drivers/net/netxen/netxen_nic_init.c | 68 +++++++++++++---------------
 drivers/net/netxen/netxen_nic_main.c | 38 ++++++++++++++--
 3 files changed, 67 insertions(+), 40 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 6598a34b87d..c11c568fd7d 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -860,7 +860,6 @@ struct nx_host_rds_ring {
 	u32 skb_size;
 	struct netxen_rx_buffer *rx_buf_arr;	/* rx buffers for receive   */
 	struct list_head free_list;
-	int begin_alloc;
 };
 
 /*
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index a3203644b48..ca7c8d8050c 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -308,7 +308,6 @@ int netxen_alloc_sw_resources(struct netxen_adapter *adapter)
 			}
 			memset(rds_ring->rx_buf_arr, 0, RCV_BUFFSIZE);
 			INIT_LIST_HEAD(&rds_ring->free_list);
-			rds_ring->begin_alloc = 0;
 			/*
 			 * Now go through all of them, set reference handles
 			 * and put them in the queues.
@@ -1435,7 +1434,6 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 	struct rcv_desc *pdesc;
 	struct netxen_rx_buffer *buffer;
 	int count = 0;
-	int index = 0;
 	netxen_ctx_msg msg = 0;
 	dma_addr_t dma;
 	struct list_head *head;
@@ -1443,7 +1441,6 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 	rds_ring = &recv_ctx->rds_rings[ringid];
 
 	producer = rds_ring->producer;
-	index = rds_ring->begin_alloc;
 	head = &rds_ring->free_list;
 
 	/* We can start writing rx descriptors into the phantom memory. */
@@ -1451,39 +1448,37 @@ void netxen_post_rx_buffers(struct netxen_adapter *adapter, u32 ctx, u32 ringid)
 
 		skb = dev_alloc_skb(rds_ring->skb_size);
 		if (unlikely(!skb)) {
-			rds_ring->begin_alloc = index;
 			break;
 		}
 
+		if (!adapter->ahw.cut_through)
+			skb_reserve(skb, 2);
+
+		dma = pci_map_single(pdev, skb->data,
+				rds_ring->dma_size, PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(pdev, dma)) {
+			dev_kfree_skb_any(skb);
+			break;
+		}
+
+		count++;
 		buffer = list_entry(head->next, struct netxen_rx_buffer, list);
 		list_del(&buffer->list);
 
-		count++;	/* now there should be no failure */
-		pdesc = &rds_ring->desc_head[producer];
-
-		if (!adapter->ahw.cut_through)
-			skb_reserve(skb, 2);
-		/* This will be setup when we receive the
-		 * buffer after it has been filled  FSL  TBD TBD
-		 * skb->dev = netdev;
-		 */
-		dma = pci_map_single(pdev, skb->data, rds_ring->dma_size,
-				     PCI_DMA_FROMDEVICE);
-		pdesc->addr_buffer = cpu_to_le64(dma);
 		buffer->skb = skb;
 		buffer->state = NETXEN_BUFFER_BUSY;
 		buffer->dma = dma;
+
 		/* make a rcv descriptor  */
+		pdesc = &rds_ring->desc_head[producer];
+		pdesc->addr_buffer = cpu_to_le64(dma);
 		pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
 		pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
-		DPRINTK(INFO, "done writing descripter\n");
-		producer =
-		    get_next_index(producer, rds_ring->max_rx_desc_count);
-		index = get_next_index(index, rds_ring->max_rx_desc_count);
+
+		producer = get_next_index(producer, rds_ring->max_rx_desc_count);
 	}
 	/* if we did allocate buffers, then write the count to Phantom */
 	if (count) {
-		rds_ring->begin_alloc = index;
 		rds_ring->producer = producer;
 			/* Window = 1 */
 		adapter->pci_write_normalize(adapter,
@@ -1522,49 +1517,50 @@ static void netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 	struct rcv_desc *pdesc;
 	struct netxen_rx_buffer *buffer;
 	int count = 0;
-	int index = 0;
 	struct list_head *head;
+	dma_addr_t dma;
 
 	rds_ring = &recv_ctx->rds_rings[ringid];
 
 	producer = rds_ring->producer;
-	index = rds_ring->begin_alloc;
 	head = &rds_ring->free_list;
 	/* We can start writing rx descriptors into the phantom memory. */
 	while (!list_empty(head)) {
 
 		skb = dev_alloc_skb(rds_ring->skb_size);
 		if (unlikely(!skb)) {
-			rds_ring->begin_alloc = index;
 			break;
 		}
 
+		if (!adapter->ahw.cut_through)
+			skb_reserve(skb, 2);
+
+		dma = pci_map_single(pdev, skb->data,
+				rds_ring->dma_size, PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(pdev, dma)) {
+			dev_kfree_skb_any(skb);
+			break;
+		}
+
+		count++;
 		buffer = list_entry(head->next, struct netxen_rx_buffer, list);
 		list_del(&buffer->list);
 
-		count++;	/* now there should be no failure */
-		pdesc = &rds_ring->desc_head[producer];
-		if (!adapter->ahw.cut_through)
-			skb_reserve(skb, 2);
 		buffer->skb = skb;
 		buffer->state = NETXEN_BUFFER_BUSY;
-		buffer->dma = pci_map_single(pdev, skb->data,
-					     rds_ring->dma_size,
-					     PCI_DMA_FROMDEVICE);
+		buffer->dma = dma;
 
 		/* make a rcv descriptor  */
+		pdesc = &rds_ring->desc_head[producer];
 		pdesc->reference_handle = cpu_to_le16(buffer->ref_handle);
 		pdesc->buffer_length = cpu_to_le32(rds_ring->dma_size);
 		pdesc->addr_buffer = cpu_to_le64(buffer->dma);
-		producer =
-		    get_next_index(producer, rds_ring->max_rx_desc_count);
-		index = get_next_index(index, rds_ring->max_rx_desc_count);
-		buffer = &rds_ring->rx_buf_arr[index];
+
+		producer = get_next_index(producer, rds_ring->max_rx_desc_count);
 	}
 
 	/* if we did allocate buffers, then write the count to Phantom */
 	if (count) {
-		rds_ring->begin_alloc = index;
 		rds_ring->producer = producer;
 			/* Window = 1 */
 		adapter->pci_write_normalize(adapter,
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 9268fd2fbac..86867405a36 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1200,6 +1200,24 @@ static bool netxen_tso_check(struct net_device *netdev,
 	return tso;
 }
 
+static void
+netxen_clean_tx_dma_mapping(struct pci_dev *pdev,
+		struct netxen_cmd_buffer *pbuf, int last)
+{
+	int k;
+	struct netxen_skb_frag *buffrag;
+
+	buffrag = &pbuf->frag_array[0];
+	pci_unmap_single(pdev, buffrag->dma,
+			buffrag->length, PCI_DMA_TODEVICE);
+
+	for (k = 1; k < last; k++) {
+		buffrag = &pbuf->frag_array[k];
+		pci_unmap_page(pdev, buffrag->dma,
+			buffrag->length, PCI_DMA_TODEVICE);
+	}
+}
+
 static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
@@ -1208,6 +1226,8 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	struct netxen_cmd_buffer *pbuf;
 	struct netxen_skb_frag *buffrag;
 	struct cmd_desc_type0 *hwdesc;
+	struct pci_dev *pdev = adapter->pdev;
+	dma_addr_t temp_dma;
 	int i, k;
 
 	u32 producer, consumer;
@@ -1240,8 +1260,12 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	pbuf->skb = skb;
 	pbuf->frag_count = frag_count;
 	buffrag = &pbuf->frag_array[0];
-	buffrag->dma = pci_map_single(adapter->pdev, skb->data, first_seg_len,
+	temp_dma = pci_map_single(pdev, skb->data, first_seg_len,
 				      PCI_DMA_TODEVICE);
+	if (pci_dma_mapping_error(pdev, temp_dma))
+		goto drop_packet;
+
+	buffrag->dma = temp_dma;
 	buffrag->length = first_seg_len;
 	netxen_set_tx_frags_len(hwdesc, frag_count, skb->len);
 	netxen_set_tx_port(hwdesc, adapter->portnum);
@@ -1253,7 +1277,6 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		struct skb_frag_struct *frag;
 		int len, temp_len;
 		unsigned long offset;
-		dma_addr_t temp_dma;
 
 		/* move to next desc. if there is a need */
 		if ((i & 0x3) == 0) {
@@ -1269,8 +1292,12 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		offset = frag->page_offset;
 
 		temp_len = len;
-		temp_dma = pci_map_page(adapter->pdev, frag->page, offset,
+		temp_dma = pci_map_page(pdev, frag->page, offset,
 					len, PCI_DMA_TODEVICE);
+		if (pci_dma_mapping_error(pdev, temp_dma)) {
+			netxen_clean_tx_dma_mapping(pdev, pbuf, i);
+			goto drop_packet;
+		}
 
 		buffrag++;
 		buffrag->dma = temp_dma;
@@ -1345,6 +1372,11 @@ static int netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	netdev->trans_start = jiffies;
 
 	return NETDEV_TX_OK;
+
+drop_packet:
+	adapter->stats.txdropped++;
+	dev_kfree_skb_any(skb);
+	return NETDEV_TX_OK;
 }
 
 static int netxen_nic_check_temp(struct netxen_adapter *adapter)
-- 
GitLab


From 2950e952920811be465ec95c6b56f03dc66a05c0 Mon Sep 17 00:00:00 2001
From: Jos-Vicente Gilabert <josevteg@gmail.com>
Date: Wed, 14 Jan 2009 20:55:00 -0800
Subject: [PATCH 385/492] drivers/net/irda/irda-usb.c: fix buffer overflow

Taken from http://bugzilla.kernel.org/show_bug.cgi?id=12397

We're doing an sprintf of an 11-char string into an 11-char buffer.
Whoops.  It breaks firmware uploading.

Reported-by: Jos-Vicente Gilabert <josevteg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/irda/irda-usb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 29118f58a14..3a22dc41b65 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1073,7 +1073,7 @@ static int stir421x_patch_device(struct irda_usb_cb *self)
 {
 	unsigned int i;
 	int ret;
-	char stir421x_fw_name[11];
+	char stir421x_fw_name[12];
 	const struct firmware *fw;
 	const unsigned char *fw_version_ptr; /* pointer to version string */
 	unsigned long fw_version = 0;
-- 
GitLab


From 937f1ba56b4be37d9e2ad77412f95048662058d2 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 14 Jan 2009 21:05:05 -0800
Subject: [PATCH 386/492] net: Add init_dummy_netdev() and fix EMAC driver
 using it

This adds an init_dummy_netdev() function that gets a network device
structure (allocation and lifetime entirely under caller's control) and
initialize the minimum amount of fields so it can be used to schedule
NAPI polls without registering a full blown interface. This is to be
used by drivers that need to tie several hardware interfaces to a single
NAPI poll scheduler due to HW limitations.

It also updates the ibm_newemac driver to use that, this fixing the
oops on 2.6.29 due to passing NULL as "dev" to netif_napi_add()

Symbol is exported GPL only a I don't think we want binary drivers doing
that sort of acrobatics (if we want them at all).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ibm_newemac/mal.c |  4 +++-
 drivers/net/ibm_newemac/mal.h |  2 ++
 include/linux/netdevice.h     |  3 +++
 net/core/dev.c                | 39 +++++++++++++++++++++++++++++++++++
 4 files changed, 47 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c
index ecf9798987f..2a2fc17b287 100644
--- a/drivers/net/ibm_newemac/mal.c
+++ b/drivers/net/ibm_newemac/mal.c
@@ -613,7 +613,9 @@ static int __devinit mal_probe(struct of_device *ofdev,
 	INIT_LIST_HEAD(&mal->list);
 	spin_lock_init(&mal->lock);
 
-	netif_napi_add(NULL, &mal->napi, mal_poll,
+	init_dummy_netdev(&mal->dummy_dev);
+
+	netif_napi_add(&mal->dummy_dev, &mal->napi, mal_poll,
 		       CONFIG_IBM_NEW_EMAC_POLL_WEIGHT);
 
 	/* Load power-on reset defaults */
diff --git a/drivers/net/ibm_newemac/mal.h b/drivers/net/ibm_newemac/mal.h
index 2f0a8736084..9ededfbf072 100644
--- a/drivers/net/ibm_newemac/mal.h
+++ b/drivers/net/ibm_newemac/mal.h
@@ -214,6 +214,8 @@ struct mal_instance {
 	int			index;
 	spinlock_t		lock;
 
+	struct net_device	dummy_dev;
+
 	unsigned int features;
 };
 
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 4647604c7ca..ec54785d34f 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -795,6 +795,7 @@ struct net_device
 	       NETREG_UNREGISTERING,	/* called unregister_netdevice */
 	       NETREG_UNREGISTERED,	/* completed unregister todo */
 	       NETREG_RELEASED,		/* called free_netdev */
+	       NETREG_DUMMY,		/* dummy device for NAPI poll */
 	} reg_state;
 
 	/* Called from unregister, can be used to call free_netdev */
@@ -1077,6 +1078,8 @@ extern void		free_netdev(struct net_device *dev);
 extern void		synchronize_net(void);
 extern int 		register_netdevice_notifier(struct notifier_block *nb);
 extern int		unregister_netdevice_notifier(struct notifier_block *nb);
+extern int		init_dummy_netdev(struct net_device *dev);
+
 extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
 extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
 extern struct net_device	*__dev_get_by_index(struct net *net, int ifindex);
diff --git a/net/core/dev.c b/net/core/dev.c
index 60377b6c0a8..8d675975d85 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -4430,6 +4430,45 @@ err_uninit:
 	goto out;
 }
 
+/**
+ *	init_dummy_netdev	- init a dummy network device for NAPI
+ *	@dev: device to init
+ *
+ *	This takes a network device structure and initialize the minimum
+ *	amount of fields so it can be used to schedule NAPI polls without
+ *	registering a full blown interface. This is to be used by drivers
+ *	that need to tie several hardware interfaces to a single NAPI
+ *	poll scheduler due to HW limitations.
+ */
+int init_dummy_netdev(struct net_device *dev)
+{
+	/* Clear everything. Note we don't initialize spinlocks
+	 * are they aren't supposed to be taken by any of the
+	 * NAPI code and this dummy netdev is supposed to be
+	 * only ever used for NAPI polls
+	 */
+	memset(dev, 0, sizeof(struct net_device));
+
+	/* make sure we BUG if trying to hit standard
+	 * register/unregister code path
+	 */
+	dev->reg_state = NETREG_DUMMY;
+
+	/* initialize the ref count */
+	atomic_set(&dev->refcnt, 1);
+
+	/* NAPI wants this */
+	INIT_LIST_HEAD(&dev->napi_list);
+
+	/* a dummy interface is started by default */
+	set_bit(__LINK_STATE_PRESENT, &dev->state);
+	set_bit(__LINK_STATE_START, &dev->state);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(init_dummy_netdev);
+
+
 /**
  *	register_netdev	- register a network device
  *	@dev: device to register
-- 
GitLab


From d57bc36e7aba9e3a00d154f5eff80ff596146fc4 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 14 Jan 2009 21:05:55 -0800
Subject: [PATCH 387/492] ax88796: start_xmit fix using net_device_ops

This patch hooks up the start_xmit/tx_timeout/get_stats callbacks
in the ax88796 driver since they no longer are installed by the
lib8390 code. Without this patch the function dev_hard_start_xmit()
crashes due to a start_xmit callback with the value NULL.

While at it, update the ax88796 driver to make use of use of struct
net_device_ops.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/ax88796.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 337488ec707..a4eb6c40678 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -37,7 +37,10 @@ static int phy_debug = 0;
 #define __ei_open       ax_ei_open
 #define __ei_close      ax_ei_close
 #define __ei_poll	ax_ei_poll
+#define __ei_start_xmit ax_ei_start_xmit
 #define __ei_tx_timeout ax_ei_tx_timeout
+#define __ei_get_stats  ax_ei_get_stats
+#define __ei_set_multicast_list ax_ei_set_multicast_list
 #define __ei_interrupt  ax_ei_interrupt
 #define ____alloc_ei_netdev ax__alloc_ei_netdev
 #define __NS8390_init   ax_NS8390_init
@@ -623,6 +626,23 @@ static void ax_eeprom_register_write(struct eeprom_93cx6 *eeprom)
 }
 #endif
 
+static const struct net_device_ops ax_netdev_ops = {
+	.ndo_open		= ax_open,
+	.ndo_stop		= ax_close,
+	.ndo_do_ioctl		= ax_ioctl,
+
+	.ndo_start_xmit		= ax_ei_start_xmit,
+	.ndo_tx_timeout		= ax_ei_tx_timeout,
+	.ndo_get_stats		= ax_ei_get_stats,
+	.ndo_set_multicast_list = ax_ei_set_multicast_list,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_change_mtu		= eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	.ndo_poll_controller	= ax_ei_poll,
+#endif
+};
+
 /* setup code */
 
 static void ax_initial_setup(struct net_device *dev, struct ei_device *ei_local)
@@ -738,9 +758,7 @@ static int ax_init_dev(struct net_device *dev, int first_init)
 	ei_status.get_8390_hdr	= &ax_get_8390_hdr;
 	ei_status.priv = 0;
 
-	dev->open		= ax_open;
-	dev->stop		= ax_close;
-	dev->do_ioctl		= ax_ioctl;
+	dev->netdev_ops		= &ax_netdev_ops;
 	dev->ethtool_ops	= &ax_ethtool_ops;
 
 	ax->msg_enable		= NETIF_MSG_LINK;
@@ -753,9 +771,6 @@ static int ax_init_dev(struct net_device *dev, int first_init)
 	ax->mii.mdio_write	= ax_phy_write;
 	ax->mii.dev		= dev;
 
-#ifdef CONFIG_NET_POLL_CONTROLLER
-	dev->poll_controller = ax_ei_poll;
-#endif
 	ax_NS8390_init(dev, 0);
 
 	if (first_init)
-- 
GitLab


From c53a6ee88b0a91bd012ef1b7988c0b93dae6f24d Mon Sep 17 00:00:00 2001
From: Oliver Hartkopp <oliver@hartkopp.net>
Date: Wed, 14 Jan 2009 21:06:55 -0800
Subject: [PATCH 388/492] can: fix slowpath issue in hrtimer callback function

Due to the loopback functionality in can_send() we can not invoke it
from hardirq context which was done inside the
bcm_tx_timeout_handler() hrtimer callback:

[  700.361154]  [<c012228c>] warn_slowpath+0x80/0xb6
[  700.361163]  [<c013d559>] valid_state+0x125/0x136
[  700.361171]  [<c013d858>] mark_lock+0x18e/0x332
[  700.361180]  [<c013e300>] __lock_acquire+0x12e/0xb1e
[  700.361189]  [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm]
[  700.361198]  [<c031e20a>] dev_queue_xmit+0x191/0x479
[  700.361206]  [<c01262a7>] __local_bh_disable+0x2b/0x64
[  700.361213]  [<c031e20a>] dev_queue_xmit+0x191/0x479
[  700.361225]  [<f8aa69a1>] can_send+0xd7/0x11a [can]
[  700.361235]  [<f8ab522b>] bcm_can_tx+0x9d/0xd9 [can_bcm]
[  700.361245]  [<f8ab597f>] bcm_tx_timeout_handler+0x6a/0xbc [can_bcm]
[  700.361255]  [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm]
[  700.361263]  [<c0134143>] __run_hrtimer+0x5a/0x86
[  700.361273]  [<f8ab5915>] bcm_tx_timeout_handler+0x0/0xbc [can_bcm]
[  700.361282]  [<c0134a50>] hrtimer_interrupt+0xb9/0x110

This patch moves the rest of the functionality from the hrtimer
callback to the already existing tasklet to fix this slowpath problem.

Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/can/bcm.c | 57 +++++++++++++++++++++++++++------------------------
 1 file changed, 30 insertions(+), 27 deletions(-)

diff --git a/net/can/bcm.c b/net/can/bcm.c
index 1649c8ab2c2..b7c7d465113 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -347,51 +347,54 @@ static void bcm_tx_timeout_tsklet(unsigned long data)
 	struct bcm_op *op = (struct bcm_op *)data;
 	struct bcm_msg_head msg_head;
 
-	/* create notification to user */
-	msg_head.opcode  = TX_EXPIRED;
-	msg_head.flags   = op->flags;
-	msg_head.count   = op->count;
-	msg_head.ival1   = op->ival1;
-	msg_head.ival2   = op->ival2;
-	msg_head.can_id  = op->can_id;
-	msg_head.nframes = 0;
-
-	bcm_send_to_user(op, &msg_head, NULL, 0);
-}
-
-/*
- * bcm_tx_timeout_handler - performes cyclic CAN frame transmissions
- */
-static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
-{
-	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
-	enum hrtimer_restart ret = HRTIMER_NORESTART;
-
 	if (op->kt_ival1.tv64 && (op->count > 0)) {
 
 		op->count--;
-		if (!op->count && (op->flags & TX_COUNTEVT))
-			tasklet_schedule(&op->tsklet);
+		if (!op->count && (op->flags & TX_COUNTEVT)) {
+
+			/* create notification to user */
+			msg_head.opcode  = TX_EXPIRED;
+			msg_head.flags   = op->flags;
+			msg_head.count   = op->count;
+			msg_head.ival1   = op->ival1;
+			msg_head.ival2   = op->ival2;
+			msg_head.can_id  = op->can_id;
+			msg_head.nframes = 0;
+
+			bcm_send_to_user(op, &msg_head, NULL, 0);
+		}
 	}
 
 	if (op->kt_ival1.tv64 && (op->count > 0)) {
 
 		/* send (next) frame */
 		bcm_can_tx(op);
-		hrtimer_forward(hrtimer, ktime_get(), op->kt_ival1);
-		ret = HRTIMER_RESTART;
+		hrtimer_start(&op->timer,
+			      ktime_add(ktime_get(), op->kt_ival1),
+			      HRTIMER_MODE_ABS);
 
 	} else {
 		if (op->kt_ival2.tv64) {
 
 			/* send (next) frame */
 			bcm_can_tx(op);
-			hrtimer_forward(hrtimer, ktime_get(), op->kt_ival2);
-			ret = HRTIMER_RESTART;
+			hrtimer_start(&op->timer,
+				      ktime_add(ktime_get(), op->kt_ival2),
+				      HRTIMER_MODE_ABS);
 		}
 	}
+}
 
-	return ret;
+/*
+ * bcm_tx_timeout_handler - performes cyclic CAN frame transmissions
+ */
+static enum hrtimer_restart bcm_tx_timeout_handler(struct hrtimer *hrtimer)
+{
+	struct bcm_op *op = container_of(hrtimer, struct bcm_op, timer);
+
+	tasklet_schedule(&op->tsklet);
+
+	return HRTIMER_NORESTART;
 }
 
 /*
-- 
GitLab


From 7e86c0e6850504ec9516b953f316a47277825e33 Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Thu, 15 Jan 2009 10:21:23 +0100
Subject: [PATCH 389/492] sound: virtuoso: do not overwrite EEPROM on Xonar
 D2/D2X

On the Asus Xonar D2 and D2X models, the SPI chip select signal for the
fourth DAC shares its pin with the serial clock for the EEPROM that
contains the PCI subdevice ID values.  It appears that when DAC
registers are written and some other unknown conditions occur (probably
noise on the EEPROM's chip select line), the EEPROM gets overwritten
with garbage, which makes it impossible to properly detect the card
later.

Therefore, we better avoid DAC register writes and make sure that the
driver works with the DAC's registers' default values.  Consequently,
the sample format is now I2S instead of left-justified (no user-visible
change), and the DAC's volume/mute registers cannot be used anymore
(volume changes are now done by the software volume plugin).

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/oxygen/virtuoso.c | 17 +++++++++++++----
 1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c
index 98c6a8c65d8..e9e829e83d7 100644
--- a/sound/pci/oxygen/virtuoso.c
+++ b/sound/pci/oxygen/virtuoso.c
@@ -26,7 +26,7 @@
  * SPI 0 -> 1st PCM1796 (front)
  * SPI 1 -> 2nd PCM1796 (surround)
  * SPI 2 -> 3rd PCM1796 (center/LFE)
- * SPI 4 -> 4th PCM1796 (back)
+ * SPI 4 -> 4th PCM1796 (back) and EEPROM self-destruct (do not use!)
  *
  * GPIO 2 -> M0 of CS5381
  * GPIO 3 -> M1 of CS5381
@@ -207,6 +207,12 @@ static void xonar_gpio_changed(struct oxygen *chip);
 static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
 				     u8 reg, u8 value)
 {
+	/*
+	 * We don't want to do writes on SPI 4 because the EEPROM, which shares
+	 * the same pin, might get confused and broken.  We'd better take care
+	 * that the driver works with the default register values ...
+	 */
+#if 0
 	/* maps ALSA channel pair number to SPI output */
 	static const u8 codec_map[4] = {
 		0, 1, 2, 4
@@ -217,6 +223,7 @@ static inline void pcm1796_write_spi(struct oxygen *chip, unsigned int codec,
 			 (codec_map[codec] << OXYGEN_SPI_CODEC_SHIFT) |
 			 OXYGEN_SPI_CEN_LATCH_CLOCK_HI,
 			 (reg << 8) | value);
+#endif
 }
 
 static inline void pcm1796_write_i2c(struct oxygen *chip, unsigned int codec,
@@ -750,6 +757,9 @@ static const DECLARE_TLV_DB_SCALE(cs4362a_db_scale, -12700, 100, 0);
 
 static int xonar_d2_control_filter(struct snd_kcontrol_new *template)
 {
+	if (!strncmp(template->name, "Master Playback ", 16))
+		/* disable volume/mute because they would require SPI writes */
+		return 1;
 	if (!strncmp(template->name, "CD Capture ", 11))
 		/* CD in is actually connected to the video in pin */
 		template->private_value ^= AC97_CD ^ AC97_VIDEO;
@@ -840,9 +850,8 @@ static const struct oxygen_model model_xonar_d2 = {
 	.dac_volume_min = 0x0f,
 	.dac_volume_max = 0xff,
 	.misc_flags = OXYGEN_MISC_MIDI,
-	.function_flags = OXYGEN_FUNCTION_SPI |
-			  OXYGEN_FUNCTION_ENABLE_SPI_4_5,
-	.dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
+	.function_flags = OXYGEN_FUNCTION_SPI,
+	.dac_i2s_format = OXYGEN_I2S_FORMAT_I2S,
 	.adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST,
 };
 
-- 
GitLab


From 98a4826b99bc4bcc34c604b2fc4fcf4d771600ec Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Wed, 14 Jan 2009 10:56:32 +0100
Subject: [PATCH 390/492] sched: fix bandwidth validation for UID grouping

Impact: make rt-limit tunables work again

Mark Glines reported:

> I've got an issue on x86-64 where I can't configure the system to allow
> RT tasks for a non-root user.
>
> In 2.6.26.5, I was able to do the following to set things up nicely:
> echo 450000 >/sys/kernel/uids/0/cpu_rt_runtime
> echo 450000 >/sys/kernel/uids/1000/cpu_rt_runtime
>
> Seems like every value I try to echo into the /sys files returns EINVAL.

For UID grouping we initialize the root group with infinite bandwidth
which by default is actually more than the global limit, therefore the
bandwidth check always fails.

Because the root group is a phantom group (for UID grouping) we cannot
runtime adjust it, therefore we let it reflect the global bandwidth
settings.

Reported-by: Mark Glines <mark@glines.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/kernel/sched.c b/kernel/sched.c
index 3b630d88266..ed62d1cee05 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -9050,6 +9050,13 @@ static int tg_schedulable(struct task_group *tg, void *data)
 		runtime = d->rt_runtime;
 	}
 
+#ifdef CONFIG_USER_SCHED
+	if (tg == &root_task_group) {
+		period = global_rt_period();
+		runtime = global_rt_runtime();
+	}
+#endif
+
 	/*
 	 * Cannot have more runtime than the period.
 	 */
-- 
GitLab


From cce7ade803699463ecc62a065ca522004f7ccb3d Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Thu, 15 Jan 2009 14:53:37 +0100
Subject: [PATCH 391/492] sched: SCHED_IDLE weight change

Increase the SCHED_IDLE weight from 2 to 3, this gives much more stable
vruntime numbers.

time advanced in 100ms:

 weight=2

 64765.988352
 67012.881408
 88501.412352

 weight=3

 35496.181411
 34130.971298
 35497.411573

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/sched.c b/kernel/sched.c
index ed62d1cee05..6acfb3c2398 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -1323,8 +1323,8 @@ static inline void update_load_sub(struct load_weight *lw, unsigned long dec)
  * slice expiry etc.
  */
 
-#define WEIGHT_IDLEPRIO		2
-#define WMULT_IDLEPRIO		(1 << 31)
+#define WEIGHT_IDLEPRIO                3
+#define WMULT_IDLEPRIO         1431655765
 
 /*
  * Nice levels are multiplicative, with a gentle 10% change for every
-- 
GitLab


From 6bc912b71b6f33b041cfde93ca3f019cbaa852bc Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Thu, 15 Jan 2009 14:53:38 +0100
Subject: [PATCH 392/492] sched: SCHED_OTHER vs SCHED_IDLE isolation

Stronger SCHED_IDLE isolation:

 - no SCHED_IDLE buddies
 - never let SCHED_IDLE preempt on wakeup
 - always preempt SCHED_IDLE on wakeup
 - limit SLEEPER fairness for SCHED_IDLE.

Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_fair.c | 30 ++++++++++++++++++++++--------
 1 file changed, 22 insertions(+), 8 deletions(-)

diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 8e1352c7555..cdebd8089cb 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -677,9 +677,13 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial)
 			unsigned long thresh = sysctl_sched_latency;
 
 			/*
-			 * convert the sleeper threshold into virtual time
+			 * Convert the sleeper threshold into virtual time.
+			 * SCHED_IDLE is a special sub-class.  We care about
+			 * fairness only relative to other SCHED_IDLE tasks,
+			 * all of which have the same weight.
 			 */
-			if (sched_feat(NORMALIZED_SLEEPER))
+			if (sched_feat(NORMALIZED_SLEEPER) &&
+					task_of(se)->policy != SCHED_IDLE)
 				thresh = calc_delta_fair(thresh, se);
 
 			vruntime -= thresh;
@@ -1340,14 +1344,18 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se)
 
 static void set_last_buddy(struct sched_entity *se)
 {
-	for_each_sched_entity(se)
-		cfs_rq_of(se)->last = se;
+	if (likely(task_of(se)->policy != SCHED_IDLE)) {
+		for_each_sched_entity(se)
+			cfs_rq_of(se)->last = se;
+	}
 }
 
 static void set_next_buddy(struct sched_entity *se)
 {
-	for_each_sched_entity(se)
-		cfs_rq_of(se)->next = se;
+	if (likely(task_of(se)->policy != SCHED_IDLE)) {
+		for_each_sched_entity(se)
+			cfs_rq_of(se)->next = se;
+	}
 }
 
 /*
@@ -1393,12 +1401,18 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int sync)
 		return;
 
 	/*
-	 * Batch tasks do not preempt (their preemption is driven by
+	 * Batch and idle tasks do not preempt (their preemption is driven by
 	 * the tick):
 	 */
-	if (unlikely(p->policy == SCHED_BATCH))
+	if (unlikely(p->policy != SCHED_NORMAL))
 		return;
 
+	/* Idle tasks are by definition preempted by everybody. */
+	if (unlikely(curr->policy == SCHED_IDLE)) {
+		resched_task(curr);
+		return;
+	}
+
 	if (!sched_feat(WAKEUP_PREEMPT))
 		return;
 
-- 
GitLab


From e17036dac189dd034c092a91df56aa740db7146d Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Thu, 15 Jan 2009 14:53:39 +0100
Subject: [PATCH 393/492] sched: fix update_min_vruntime

Impact: fix SCHED_IDLE latency problems

OK, so we have 1 running task A (which is obviously curr and the tree is
equally obviously empty).

'A' nicely chugs along, doing its thing, carrying min_vruntime along as it
goes.

Then some whacko speed freak SCHED_IDLE task gets inserted due to SMP
balancing, which is very likely far right, in that case

update_curr
  update_min_vruntime
    cfs_rq->rb_leftmost := true (the crazy task sitting in a tree)
      vruntime = se->vruntime

and voila, min_vruntime is waaay right of where it ought to be.

OK, so why did I write it like that to begin with...

Aah, yes.

Say we've just dequeued current

schedule
  deactivate_task(prev)
    dequeue_entity
      update_min_vruntime

Then we'll set

  vruntime = cfs_rq->min_vruntime;

we find !cfs_rq->curr, but do find someone in the tree. Then we _must_
do vruntime = se->vruntime, because

 vruntime = min_vruntime(vruntime := cfs_rq->min_vruntime, se->vruntime)

will not advance vruntime, and cause lags the other way around (which we
fixed with that initial patch: 1af5f730fc1bf7c62ec9fb2d307206e18bf40a69
(sched: more accurate min_vruntime accounting).

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Mike Galbraith <efault@gmx.de>
Acked-by: Mike Galbraith <efault@gmx.de>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_fair.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index cdebd8089cb..16b419bb8b0 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -283,7 +283,7 @@ static void update_min_vruntime(struct cfs_rq *cfs_rq)
 						   struct sched_entity,
 						   run_node);
 
-		if (vruntime == cfs_rq->min_vruntime)
+		if (!cfs_rq->curr)
 			vruntime = se->vruntime;
 		else
 			vruntime = min_vruntime(vruntime, se->vruntime);
-- 
GitLab


From eff317d0834ad1ff03f747f6bc2d76b9a9c95160 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Date: Thu, 15 Jan 2009 14:40:47 +0200
Subject: [PATCH 394/492] ASoC: Fix the power update function for
 snd_soc_dapm_value_mux

Modify the check for the mux type to also handle the
snd_soc_dapm_value_mux type in a same way as the snd_soc_dapm_mux.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/soc-dapm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 493a4e8aa27..a2f1da8b464 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -720,7 +720,8 @@ static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget,
 	struct snd_soc_dapm_path *path;
 	int found = 0;
 
-	if (widget->id != snd_soc_dapm_mux)
+	if (widget->id != snd_soc_dapm_mux &&
+	    widget->id != snd_soc_dapm_value_mux)
 		return -ENODEV;
 
 	if (!snd_soc_test_bits(widget->codec, e->reg, mask, val))
-- 
GitLab


From 428549f5746c9d6135d425d076a1bed2614d58ee Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Thu, 15 Jan 2009 16:56:59 +0100
Subject: [PATCH 395/492] ALSA: hda - Fix invalid amp value for STAC925x

The value set in the commit 2465fb6605b4f8f3964b132017bf4078d1265fe9
is actually wrong.  The value range is from 0 to 0x1f while the patch
sets to 0x7f.  Let's fix it.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index e6c13963f21..c39deebb588 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -886,7 +886,7 @@ static struct hda_verb stac925x_core_init[] = {
 	/* set dac0mux for dac converter */
 	{ 0x06, AC_VERB_SET_CONNECT_SEL, 0x00},
 	/* unmute and set max the selector */
-	{ 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb07f },
+	{ 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb01f },
 	{}
 };
 
-- 
GitLab


From 1cf167f27ad2720af11ee8aa350009342f909e70 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:22:18 -0800
Subject: [PATCH 396/492] bnx2x: Using singlethread work queue

Since slow-path events, including link update, are handled in
work-queue, a race condition was introduced in the self-test that
sometimes caused the link status to fail: the self-test was running
under RTNL lock, and if the link-watch was scheduled it stoped the
shared work-queue (waiting for the RTNL lock) and so the link update
event was not handled until the self-test ended (releasing the RTNL
lock) with failure (since the link status was not updated)

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x.h      |  2 +-
 drivers/net/bnx2x_main.c | 20 +++++++++++++++-----
 2 files changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index fd705d1295a..96a8889afbe 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -811,7 +811,7 @@ struct bnx2x {
 	int			pm_cap;
 	int			pcie_cap;
 
-	struct work_struct	sp_task;
+	struct delayed_work	sp_task;
 	struct work_struct	reset_task;
 
 	struct timer_list	timer;
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 4be05847f86..cc6ffba7459 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -95,6 +95,7 @@ MODULE_PARM_DESC(debug, "default debug msglevel");
 module_param(use_multi, int, 0);
 MODULE_PARM_DESC(use_multi, "use per-CPU queues");
 #endif
+static struct workqueue_struct *bnx2x_wq;
 
 enum bnx2x_board_type {
 	BCM57710 = 0,
@@ -671,7 +672,8 @@ static void bnx2x_int_disable_sync(struct bnx2x *bp, int disable_hw)
 		synchronize_irq(bp->pdev->irq);
 
 	/* make sure sp_task is not running */
-	cancel_work_sync(&bp->sp_task);
+	cancel_delayed_work(&bp->sp_task);
+	flush_workqueue(bnx2x_wq);
 }
 
 /* fast path */
@@ -1660,7 +1662,7 @@ static irqreturn_t bnx2x_interrupt(int irq, void *dev_instance)
 
 
 	if (unlikely(status & 0x1)) {
-		schedule_work(&bp->sp_task);
+		queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
 
 		status &= ~0x1;
 		if (!status)
@@ -2820,7 +2822,7 @@ static void bnx2x_attn_int(struct bnx2x *bp)
 
 static void bnx2x_sp_task(struct work_struct *work)
 {
-	struct bnx2x *bp = container_of(work, struct bnx2x, sp_task);
+	struct bnx2x *bp = container_of(work, struct bnx2x, sp_task.work);
 	u16 status;
 
 
@@ -2875,7 +2877,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 		return IRQ_HANDLED;
 #endif
 
-	schedule_work(&bp->sp_task);
+	queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
 
 	return IRQ_HANDLED;
 }
@@ -7501,7 +7503,7 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 
 	mutex_init(&bp->port.phy_mutex);
 
-	INIT_WORK(&bp->sp_task, bnx2x_sp_task);
+	INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
 	INIT_WORK(&bp->reset_task, bnx2x_reset_task);
 
 	rc = bnx2x_get_hwinfo(bp);
@@ -10519,12 +10521,20 @@ static struct pci_driver bnx2x_pci_driver = {
 
 static int __init bnx2x_init(void)
 {
+	bnx2x_wq = create_singlethread_workqueue("bnx2x");
+	if (bnx2x_wq == NULL) {
+		printk(KERN_ERR PFX "Cannot create workqueue\n");
+		return -ENOMEM;
+	}
+
 	return pci_register_driver(&bnx2x_pci_driver);
 }
 
 static void __exit bnx2x_cleanup(void)
 {
 	pci_unregister_driver(&bnx2x_pci_driver);
+
+	destroy_workqueue(bnx2x_wq);
 }
 
 module_init(bnx2x_init);
-- 
GitLab


From 58f4c4cfce5c4715b79621f0a635925c55f855d5 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:23:36 -0800
Subject: [PATCH 397/492] bnx2x: Missing memory barriers

While working on IA64, it became clear that the following memory
barriers are missing

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index cc6ffba7459..f0b2e73b87f 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1357,11 +1357,23 @@ static inline void bnx2x_update_rx_prod(struct bnx2x *bp,
 	rx_prods.cqe_prod = rx_comp_prod;
 	rx_prods.sge_prod = rx_sge_prod;
 
+	/*
+	 * Make sure that the BD and SGE data is updated before updating the
+	 * producers since FW might read the BD/SGE right after the producer
+	 * is updated.
+	 * This is only applicable for weak-ordered memory model archs such
+	 * as IA-64. The following barrier is also mandatory since FW will
+	 * assumes BDs must have buffers.
+	 */
+	wmb();
+
 	for (i = 0; i < sizeof(struct tstorm_eth_rx_producers)/4; i++)
 		REG_WR(bp, BAR_TSTRORM_INTMEM +
 		       TSTORM_RX_PRODS_OFFSET(BP_PORT(bp), FP_CL_ID(fp)) + i*4,
 		       ((u32 *)&rx_prods)[i]);
 
+	mmiowb(); /* keep prod updates ordered */
+
 	DP(NETIF_MSG_RX_STATUS,
 	   "Wrote: bd_prod %u  cqe_prod %u  sge_prod %u\n",
 	   bd_prod, rx_comp_prod, rx_sge_prod);
@@ -1582,7 +1594,6 @@ next_cqe:
 	/* Update producers */
 	bnx2x_update_rx_prod(bp, fp, bd_prod_fw, sw_comp_prod,
 			     fp->rx_sge_prod);
-	mmiowb(); /* keep prod updates ordered */
 
 	fp->rx_pkt += rx_pkt;
 	fp->rx_calls++;
@@ -8729,6 +8740,8 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up)
 	tx_bd->general_data = ((UNICAST_ADDRESS <<
 				ETH_TX_BD_ETH_ADDR_TYPE_SHIFT) | 1);
 
+	wmb();
+
 	fp->hw_tx_prods->bds_prod =
 		cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + 1);
 	mb(); /* FW restriction: must not reorder writing nbd and packets */
@@ -8780,7 +8793,6 @@ test_loopback_rx_exit:
 	/* Update producers */
 	bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod,
 			     fp->rx_sge_prod);
-	mmiowb(); /* keep prod updates ordered */
 
 test_loopback_exit:
 	bp->link_params.loopback_mode = LOOPBACK_NONE;
@@ -9707,6 +9719,15 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %d  bd %u\n", nbd, bd_prod);
 
+	/*
+	 * Make sure that the BD data is updated before updating the producer
+	 * since FW might read the BD right after the producer is updated.
+	 * This is only applicable for weak-ordered memory model archs such
+	 * as IA-64. The following barrier is also mandatory since FW will
+	 * assumes packets must have BDs.
+	 */
+	wmb();
+
 	fp->hw_tx_prods->bds_prod =
 		cpu_to_le16(le16_to_cpu(fp->hw_tx_prods->bds_prod) + nbd);
 	mb(); /* FW restriction: must not reorder writing nbd and packets */
@@ -9720,6 +9741,9 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	dev->trans_start = jiffies;
 
 	if (unlikely(bnx2x_tx_avail(fp) < MAX_SKB_FRAGS + 3)) {
+		/* We want bnx2x_tx_int to "see" the updated tx_bd_prod
+		   if we put Tx into XOFF state. */
+		smp_mb();
 		netif_stop_queue(dev);
 		bp->eth_stats.driver_xoff++;
 		if (bnx2x_tx_avail(fp) >= MAX_SKB_FRAGS + 3)
-- 
GitLab


From 4f40f2cba244e04c0f385c5ce60498b513b335dd Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:24:17 -0800
Subject: [PATCH 398/492] bnx2x: Using system page size for SGE

When the page size is not 4KB, the FW must be programmed to work with
the right SGE boundaries and fragment list length.

To avoid confusion with the BCM_PAGE_SIZE which is set to 4KB for the
FW sake, another alias for the system page size was added to
explicitly indicate that it is meant for the SGE

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x.h      |  3 +++
 drivers/net/bnx2x_main.c | 32 ++++++++++++++++----------------
 2 files changed, 19 insertions(+), 16 deletions(-)

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 96a8889afbe..2cd1e427828 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -150,6 +150,9 @@ struct sw_rx_page {
 
 #define PAGES_PER_SGE_SHIFT		0
 #define PAGES_PER_SGE			(1 << PAGES_PER_SGE_SHIFT)
+#define SGE_PAGE_SIZE			PAGE_SIZE
+#define SGE_PAGE_SHIFT			PAGE_SHIFT
+#define SGE_PAGE_ALIGN(addr)		PAGE_ALIGN(addr)
 
 #define BCM_RX_ETH_PAYLOAD_ALIGN	64
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index f0b2e73b87f..75b2624cd60 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -974,7 +974,7 @@ static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
 		return;
 
 	pci_unmap_page(bp->pdev, pci_unmap_addr(sw_buf, mapping),
-		       BCM_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
+		       SGE_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
 	__free_pages(page, PAGES_PER_SGE_SHIFT);
 
 	sw_buf->page = NULL;
@@ -1002,7 +1002,7 @@ static inline int bnx2x_alloc_rx_sge(struct bnx2x *bp,
 	if (unlikely(page == NULL))
 		return -ENOMEM;
 
-	mapping = pci_map_page(bp->pdev, page, 0, BCM_PAGE_SIZE*PAGES_PER_SGE,
+	mapping = pci_map_page(bp->pdev, page, 0, SGE_PAGE_SIZE*PAGES_PER_SGE,
 			       PCI_DMA_FROMDEVICE);
 	if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 		__free_pages(page, PAGES_PER_SGE_SHIFT);
@@ -1098,9 +1098,9 @@ static void bnx2x_update_sge_prod(struct bnx2x_fastpath *fp,
 				  struct eth_fast_path_rx_cqe *fp_cqe)
 {
 	struct bnx2x *bp = fp->bp;
-	u16 sge_len = BCM_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
+	u16 sge_len = SGE_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) -
 				     le16_to_cpu(fp_cqe->len_on_bd)) >>
-		      BCM_PAGE_SHIFT;
+		      SGE_PAGE_SHIFT;
 	u16 last_max, last_elem, first_elem;
 	u16 delta = 0;
 	u16 i;
@@ -1205,22 +1205,22 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 			       u16 cqe_idx)
 {
 	struct sw_rx_page *rx_pg, old_rx_pg;
-	struct page *sge;
 	u16 len_on_bd = le16_to_cpu(fp_cqe->len_on_bd);
 	u32 i, frag_len, frag_size, pages;
 	int err;
 	int j;
 
 	frag_size = le16_to_cpu(fp_cqe->pkt_len) - len_on_bd;
-	pages = BCM_PAGE_ALIGN(frag_size) >> BCM_PAGE_SHIFT;
+	pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT;
 
 	/* This is needed in order to enable forwarding support */
 	if (frag_size)
-		skb_shinfo(skb)->gso_size = min((u32)BCM_PAGE_SIZE,
+		skb_shinfo(skb)->gso_size = min((u32)SGE_PAGE_SIZE,
 					       max(frag_size, (u32)len_on_bd));
 
 #ifdef BNX2X_STOP_ON_ERROR
-	if (pages > 8*PAGES_PER_SGE) {
+	if (pages >
+	    min((u32)8, (u32)MAX_SKB_FRAGS) * SGE_PAGE_SIZE * PAGES_PER_SGE) {
 		BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n",
 			  pages, cqe_idx);
 		BNX2X_ERR("fp_cqe->pkt_len = %d  fp_cqe->len_on_bd = %d\n",
@@ -1236,9 +1236,8 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 
 		/* FW gives the indices of the SGE as if the ring is an array
 		   (meaning that "next" element will consume 2 indices) */
-		frag_len = min(frag_size, (u32)(BCM_PAGE_SIZE*PAGES_PER_SGE));
+		frag_len = min(frag_size, (u32)(SGE_PAGE_SIZE*PAGES_PER_SGE));
 		rx_pg = &fp->rx_page_ring[sge_idx];
-		sge = rx_pg->page;
 		old_rx_pg = *rx_pg;
 
 		/* If we fail to allocate a substitute page, we simply stop
@@ -1251,7 +1250,7 @@ static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 
 		/* Unmap the page as we r going to pass it to the stack */
 		pci_unmap_page(bp->pdev, pci_unmap_addr(&old_rx_pg, mapping),
-			      BCM_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
+			      SGE_PAGE_SIZE*PAGES_PER_SGE, PCI_DMA_FROMDEVICE);
 
 		/* Add one frag and update the appropriate fields in the skb */
 		skb_fill_page_desc(skb, j, old_rx_pg.page, 0, frag_len);
@@ -4544,7 +4543,7 @@ static void bnx2x_set_client_config(struct bnx2x *bp)
 
 	if (bp->flags & TPA_ENABLE_FLAG) {
 		tstorm_client.max_sges_for_packet =
-			BCM_PAGE_ALIGN(tstorm_client.mtu) >> BCM_PAGE_SHIFT;
+			SGE_PAGE_ALIGN(tstorm_client.mtu) >> SGE_PAGE_SHIFT;
 		tstorm_client.max_sges_for_packet =
 			((tstorm_client.max_sges_for_packet +
 			  PAGES_PER_SGE - 1) & (~(PAGES_PER_SGE - 1))) >>
@@ -4727,10 +4726,11 @@ static void bnx2x_init_internal_func(struct bnx2x *bp)
 			 bp->e1hov);
 	}
 
-	/* Init CQ ring mapping and aggregation size */
-	max_agg_size = min((u32)(bp->rx_buf_size +
-				 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
-			   (u32)0xffff);
+	/* Init CQ ring mapping and aggregation size, the FW limit is 8 frags */
+	max_agg_size =
+		min((u32)(min((u32)8, (u32)MAX_SKB_FRAGS) *
+			  SGE_PAGE_SIZE * PAGES_PER_SGE),
+		    (u32)0xffff);
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
-- 
GitLab


From ad33ea3a8d2ec324dc0f46b6ae404d824d2b349b Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:24:57 -0800
Subject: [PATCH 399/492] bnx2x: Missing mask when calculating flow control

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 75b2624cd60..9b1555820f5 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1899,7 +1899,8 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio_num, u32 mode)
 
 static void bnx2x_calc_fc_adv(struct bnx2x *bp)
 {
-	switch (bp->link_vars.ieee_fc) {
+	switch (bp->link_vars.ieee_fc &
+		MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) {
 	case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE:
 		bp->port.advertising &= ~(ADVERTISED_Asym_Pause |
 					  ADVERTISED_Pause);
-- 
GitLab


From 3c96c68b0c67d11b8519bc38233aec586f0211f4 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:25:31 -0800
Subject: [PATCH 400/492] bnx2x: Flow control updated before reporting the link

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 9b1555820f5..4f1ee1f2968 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1970,10 +1970,11 @@ static u8 bnx2x_initial_phy_init(struct bnx2x *bp)
 		rc = bnx2x_phy_init(&bp->link_params, &bp->link_vars);
 		bnx2x_release_phy_lock(bp);
 
+		bnx2x_calc_fc_adv(bp);
+
 		if (bp->link_vars.link_up)
 			bnx2x_link_report(bp);
 
-		bnx2x_calc_fc_adv(bp);
 
 		return rc;
 	}
-- 
GitLab


From a5e9a7cfad5fd301ce2b7869bbf386b70aa39e7c Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:26:01 -0800
Subject: [PATCH 401/492] bnx2x: Protecting the link change indication

Without this lock, in some race conditions the driver missed link
change indication

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 4f1ee1f2968..701bcc1260c 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -2234,9 +2234,7 @@ static void bnx2x_link_attn(struct bnx2x *bp)
 	/* Make sure that we are synced with the current statistics */
 	bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	bnx2x_acquire_phy_lock(bp);
 	bnx2x_link_update(&bp->link_params, &bp->link_vars);
-	bnx2x_release_phy_lock(bp);
 
 	if (bp->link_vars.link_up) {
 
@@ -2485,6 +2483,8 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 	if (asserted & ATTN_HARD_WIRED_MASK) {
 		if (asserted & ATTN_NIG_FOR_FUNC) {
 
+			bnx2x_acquire_phy_lock(bp);
+
 			/* save nig interrupt mask */
 			bp->nig_mask = REG_RD(bp, nig_int_mask_addr);
 			REG_WR(bp, nig_int_mask_addr, 0);
@@ -2540,8 +2540,10 @@ static void bnx2x_attn_int_asserted(struct bnx2x *bp, u32 asserted)
 	REG_WR(bp, hc_addr, asserted);
 
 	/* now set back the mask */
-	if (asserted & ATTN_NIG_FOR_FUNC)
+	if (asserted & ATTN_NIG_FOR_FUNC) {
 		REG_WR(bp, nig_int_mask_addr, bp->nig_mask);
+		bnx2x_release_phy_lock(bp);
+	}
 }
 
 static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
-- 
GitLab


From 0c6671b0d94f706dfc20cb22d792218ba9814412 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:26:51 -0800
Subject: [PATCH 402/492] bnx2x: VLAN tagged packets without VLAN offload

Wrong handling of tagged packet if VLAN offload is disabled caused
packets to get corrupted

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x.h      | 12 +++++++-----
 drivers/net/bnx2x_main.c | 42 +++++++++++++++++++++++++++++++---------
 2 files changed, 40 insertions(+), 14 deletions(-)

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 2cd1e427828..e7fbca7722d 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -20,6 +20,11 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define BCM_VLAN			1
+#endif
+
+
 /* error/debug prints */
 
 #define DRV_MODULE_NAME		"bnx2x"
@@ -78,11 +83,6 @@
 #endif
 
 
-#ifdef NETIF_F_HW_VLAN_TX
-#define BCM_VLAN			1
-#endif
-
-
 #define U64_LO(x)			(u32)(((u64)(x)) & 0xffffffff)
 #define U64_HI(x)			(u32)(((u64)(x)) >> 32)
 #define HILO_U64(hi, lo)		((((u64)(hi)) << 32) + (lo))
@@ -804,6 +804,8 @@ struct bnx2x {
 #define TPA_ENABLE_FLAG			0x80
 #define NO_MCP_FLAG			0x100
 #define BP_NOMCP(bp)			(bp->flags & NO_MCP_FLAG)
+#define HW_VLAN_TX_FLAG			0x400
+#define HW_VLAN_RX_FLAG			0x800
 
 	int			func;
 #define BP_PORT(bp)			(bp->func % PORT_MAX)
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 701bcc1260c..ca8b25126b2 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -38,9 +38,7 @@
 #include <linux/time.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
-#ifdef NETIF_F_HW_VLAN_TX
-	#include <linux/if_vlan.h>
-#endif
+#include <linux/if_vlan.h>
 #include <net/ip.h>
 #include <net/tcp.h>
 #include <net/checksum.h>
@@ -1283,6 +1281,13 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	if (likely(new_skb)) {
 		/* fix ip xsum and give it to the stack */
 		/* (no need to map the new skb) */
+#ifdef BCM_VLAN
+		int is_vlan_cqe =
+			(le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
+			 PARSING_FLAGS_VLAN);
+		int is_not_hwaccel_vlan_cqe =
+			(is_vlan_cqe && (!(bp->flags & HW_VLAN_RX_FLAG)));
+#endif
 
 		prefetch(skb);
 		prefetch(((char *)(skb)) + 128);
@@ -1307,6 +1312,12 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 			struct iphdr *iph;
 
 			iph = (struct iphdr *)skb->data;
+#ifdef BCM_VLAN
+			/* If there is no Rx VLAN offloading -
+			   take VLAN tag into an account */
+			if (unlikely(is_not_hwaccel_vlan_cqe))
+				iph = (struct iphdr *)((u8 *)iph + VLAN_HLEN);
+#endif
 			iph->check = 0;
 			iph->check = ip_fast_csum((u8 *)iph, iph->ihl);
 		}
@@ -1314,9 +1325,8 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 		if (!bnx2x_fill_frag_skb(bp, fp, skb,
 					 &cqe->fast_path_cqe, cqe_idx)) {
 #ifdef BCM_VLAN
-			if ((bp->vlgrp != NULL) &&
-			    (le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
-			     PARSING_FLAGS_VLAN))
+			if ((bp->vlgrp != NULL) && is_vlan_cqe &&
+			    (!is_not_hwaccel_vlan_cqe))
 				vlan_hwaccel_receive_skb(skb, bp->vlgrp,
 						le16_to_cpu(cqe->fast_path_cqe.
 							    vlan_tag));
@@ -1560,7 +1570,7 @@ reuse_rx:
 		}
 
 #ifdef BCM_VLAN
-		if ((bp->vlgrp != NULL) &&
+		if ((bp->vlgrp != NULL) && (bp->flags & HW_VLAN_RX_FLAG) &&
 		    (le16_to_cpu(cqe->fast_path_cqe.pars_flags.flags) &
 		     PARSING_FLAGS_VLAN))
 			vlan_hwaccel_receive_skb(skb, bp->vlgrp,
@@ -4538,7 +4548,7 @@ static void bnx2x_set_client_config(struct bnx2x *bp)
 	tstorm_client.config_flags =
 				TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
 #ifdef BCM_VLAN
-	if (bp->rx_mode && bp->vlgrp) {
+	if (bp->rx_mode && bp->vlgrp && (bp->flags & HW_VLAN_RX_FLAG)) {
 		tstorm_client.config_flags |=
 				TSTORM_ETH_CLIENT_CONFIG_VLAN_REMOVAL_ENABLE;
 		DP(NETIF_MSG_IFUP, "vlan removal enabled\n");
@@ -9567,11 +9577,14 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	   "sending pkt %u @%p  next_idx %u  bd %u @%p\n",
 	   pkt_prod, tx_buf, fp->tx_pkt_prod, bd_prod, tx_bd);
 
-	if ((bp->vlgrp != NULL) && vlan_tx_tag_present(skb)) {
+#ifdef BCM_VLAN
+	if ((bp->vlgrp != NULL) && vlan_tx_tag_present(skb) &&
+	    (bp->flags & HW_VLAN_TX_FLAG)) {
 		tx_bd->vlan = cpu_to_le16(vlan_tx_tag_get(skb));
 		tx_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_VLAN_TAG;
 		vlan_off += 4;
 	} else
+#endif
 		tx_bd->vlan = cpu_to_le16(pkt_prod);
 
 	if (xmit_type) {
@@ -10017,6 +10030,16 @@ static void bnx2x_vlan_rx_register(struct net_device *dev,
 	struct bnx2x *bp = netdev_priv(dev);
 
 	bp->vlgrp = vlgrp;
+
+	/* Set flags according to the required capabilities */
+	bp->flags &= ~(HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
+
+	if (dev->features & NETIF_F_HW_VLAN_TX)
+		bp->flags |= HW_VLAN_TX_FLAG;
+
+	if (dev->features & NETIF_F_HW_VLAN_RX)
+		bp->flags |= HW_VLAN_RX_FLAG;
+
 	if (netif_running(dev))
 		bnx2x_set_client_config(bp);
 }
@@ -10173,6 +10196,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev,
 		dev->features |= NETIF_F_HIGHDMA;
 #ifdef BCM_VLAN
 	dev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
+	bp->flags |= (HW_VLAN_RX_FLAG | HW_VLAN_TX_FLAG);
 #endif
 	dev->features |= (NETIF_F_TSO | NETIF_F_TSO_ECN);
 	dev->features |= NETIF_F_TSO6;
-- 
GitLab


From 68d5948436c2f782ebb5ddf25a6588ee452e8c30 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:27:36 -0800
Subject: [PATCH 403/492] bnx2x: Endianness issues

Adding missing le_to_cpu and disabling wrong HW endianity flag (the
two complete each other)

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index ca8b25126b2..d2350dd300b 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1438,7 +1438,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 		DP(NETIF_MSG_RX_STATUS, "CQE type %x  err %x  status %x"
 		   "  queue %x  vlan %x  len %u\n", CQE_TYPE(cqe_fp_flags),
 		   cqe_fp_flags, cqe->fast_path_cqe.status_flags,
-		   cqe->fast_path_cqe.rss_hash_result,
+		   le32_to_cpu(cqe->fast_path_cqe.rss_hash_result),
 		   le16_to_cpu(cqe->fast_path_cqe.vlan_tag),
 		   le16_to_cpu(cqe->fast_path_cqe.pkt_len));
 
@@ -2821,8 +2821,10 @@ static void bnx2x_attn_int_deasserted(struct bnx2x *bp, u32 deasserted)
 static void bnx2x_attn_int(struct bnx2x *bp)
 {
 	/* read local copy of bits */
-	u32 attn_bits = bp->def_status_blk->atten_status_block.attn_bits;
-	u32 attn_ack = bp->def_status_blk->atten_status_block.attn_bits_ack;
+	u32 attn_bits = le32_to_cpu(bp->def_status_blk->atten_status_block.
+								attn_bits);
+	u32 attn_ack = le32_to_cpu(bp->def_status_blk->atten_status_block.
+								attn_bits_ack);
 	u32 attn_state = bp->attn_state;
 
 	/* look for changed bits */
@@ -2870,7 +2872,7 @@ static void bnx2x_sp_task(struct work_struct *work)
 	if (status & 0x2)
 		bp->stats_pending = 0;
 
-	bnx2x_ack_sb(bp, DEF_SB_ID, ATTENTION_ID, bp->def_att_idx,
+	bnx2x_ack_sb(bp, DEF_SB_ID, ATTENTION_ID, le16_to_cpu(bp->def_att_idx),
 		     IGU_INT_NOP, 1);
 	bnx2x_ack_sb(bp, DEF_SB_ID, USTORM_ID, le16_to_cpu(bp->def_u_idx),
 		     IGU_INT_NOP, 1);
@@ -5161,7 +5163,6 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	REG_WR(bp, PXP2_REG_RQ_SRC_ENDIAN_M, 1);
 	REG_WR(bp, PXP2_REG_RQ_CDU_ENDIAN_M, 1);
 	REG_WR(bp, PXP2_REG_RQ_DBG_ENDIAN_M, 1);
-	REG_WR(bp, PXP2_REG_RQ_HC_ENDIAN_M, 1);
 
 /*	REG_WR(bp, PXP2_REG_RD_PBF_SWAP_MODE, 1); */
 	REG_WR(bp, PXP2_REG_RD_QM_SWAP_MODE, 1);
-- 
GitLab


From a5f67a04d998b0b6e4beb1de8f1247dd93ac1ff4 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:28:13 -0800
Subject: [PATCH 404/492] bnx2x: Fixing the doorbell size

The size of the doorbell is 4KB, this bug become visible when using
more than 8 queues

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index e7fbca7722d..6fcccef4cf3 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -739,7 +739,7 @@ struct bnx2x {
 	struct bnx2x_fastpath	fp[MAX_CONTEXT];
 	void __iomem		*regview;
 	void __iomem		*doorbells;
-#define BNX2X_DB_SIZE		(16*2048)
+#define BNX2X_DB_SIZE		(16*BCM_PAGE_SIZE)
 
 	struct net_device	*dev;
 	struct pci_dev		*pdev;
-- 
GitLab


From f5ba6772f226be0266f95642c8162493246d3b79 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:29:18 -0800
Subject: [PATCH 405/492] bnx2x: Missing brackets

Calculation bug due to missing brackets

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index d2350dd300b..a755fea996d 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -2920,7 +2920,7 @@ static irqreturn_t bnx2x_msix_sp_int(int irq, void *dev_instance)
 #define ADD_64(s_hi, a_hi, s_lo, a_lo) \
 	do { \
 		s_lo += a_lo; \
-		s_hi += a_hi + (s_lo < a_lo) ? 1 : 0; \
+		s_hi += a_hi + ((s_lo < a_lo) ? 1 : 0); \
 	} while (0)
 
 /* difference = minuend - subtrahend */
-- 
GitLab


From 26c8fa4d8a08b6e7a61f23339e2236218957ecc0 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:29:55 -0800
Subject: [PATCH 406/492] bnx2x: Indirection table initialization index

Wrong initialization of the multi-queue indirection table - it should
be using the function and not the port index

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index a755fea996d..9e6aa8a1ee9 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -4524,7 +4524,7 @@ static void bnx2x_init_context(struct bnx2x *bp)
 
 static void bnx2x_init_ind_table(struct bnx2x *bp)
 {
-	int port = BP_PORT(bp);
+	int func = BP_FUNC(bp);
 	int i;
 
 	if (!is_multi(bp))
@@ -4533,10 +4533,8 @@ static void bnx2x_init_ind_table(struct bnx2x *bp)
 	DP(NETIF_MSG_IFUP, "Initializing indirection table\n");
 	for (i = 0; i < TSTORM_INDIRECTION_TABLE_SIZE; i++)
 		REG_WR8(bp, BAR_TSTRORM_INTMEM +
-			TSTORM_INDIRECTION_TABLE_OFFSET(port) + i,
-			i % bp->num_queues);
-
-	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
+			TSTORM_INDIRECTION_TABLE_OFFSET(func) + i,
+			BP_CL_ID(bp) + (i % bp->num_queues));
 }
 
 static void bnx2x_set_client_config(struct bnx2x *bp)
@@ -5240,6 +5238,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	}
 
 	bnx2x_init_block(bp, PRS_COMMON_START, PRS_COMMON_END);
+	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 	if (CHIP_IS_E1H(bp))
-- 
GitLab


From e7799c5f79072b5b34cf08170f142bcb8569cfff Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:30:27 -0800
Subject: [PATCH 407/492] bnx2x: MTU Filter

Too big packets could pass due to wrong filter size

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 9e6aa8a1ee9..b573951600d 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -4543,7 +4543,7 @@ static void bnx2x_set_client_config(struct bnx2x *bp)
 	int port = BP_PORT(bp);
 	int i;
 
-	tstorm_client.mtu = bp->dev->mtu + ETH_OVREHEAD;
+	tstorm_client.mtu = bp->dev->mtu;
 	tstorm_client.statistics_counter_id = BP_CL_ID(bp);
 	tstorm_client.config_flags =
 				TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE;
-- 
GitLab


From 0ef00459a638ae4f5d1e5326d3e50232fa80119f Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 14 Jan 2009 21:31:08 -0800
Subject: [PATCH 408/492] bnx2x: First slow path interrupt race

The "read for interrupts" flag must be set before enabling slow-path
interrupts as well (and not just before fast-path interrupts)

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index b573951600d..7c533797c06 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -4812,6 +4812,15 @@ static void bnx2x_nic_init(struct bnx2x *bp, u32 load_code)
 	bnx2x_init_context(bp);
 	bnx2x_init_internal(bp, load_code);
 	bnx2x_init_ind_table(bp);
+	bnx2x_stats_init(bp);
+
+	/* At this point, we are ready for interrupts */
+	atomic_set(&bp->intr_sem, 0);
+
+	/* flush all before enabling interrupts */
+	mb();
+	mmiowb();
+
 	bnx2x_int_enable(bp);
 }
 
@@ -6420,17 +6429,8 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		}
 	}
 
-	bnx2x_stats_init(bp);
-
 	bp->state = BNX2X_STATE_OPENING_WAIT4_PORT;
 
-	/* Enable Rx interrupt handling before sending the ramrod
-	   as it's completed on Rx FP queue */
-	bnx2x_napi_enable(bp);
-
-	/* Enable interrupt handling */
-	atomic_set(&bp->intr_sem, 0);
-
 	rc = bnx2x_setup_leading(bp);
 	if (rc) {
 		BNX2X_ERR("Setup leading failed!\n");
-- 
GitLab


From b96ecfa689126d1e652ebd758da0b5b9b27dbd12 Mon Sep 17 00:00:00 2001
From: Phil Sutter <n0-1@freewrt.org>
Date: Wed, 14 Jan 2009 21:46:51 -0800
Subject: [PATCH 409/492] korina: fix usage of driver_data

Using platform_set_drvdata() here makes no sense, since the driver_data
field has already been filled with valuable data (i.e. the MAC address).
Also having driver_data point to the net_device is rather pointless
since struct korina_device contains an apropriate field for it.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/korina.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 4a5580c1126..fefb33db79a 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -1089,7 +1089,6 @@ static int korina_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 	SET_NETDEV_DEV(dev, &pdev->dev);
-	platform_set_drvdata(pdev, dev);
 	lp = netdev_priv(dev);
 
 	bif->dev = dev;
-- 
GitLab


From a13b27826a67bfc0ca444fb42885f2069b6898e2 Mon Sep 17 00:00:00 2001
From: Phil Sutter <n0-1@freewrt.org>
Date: Wed, 14 Jan 2009 21:47:50 -0800
Subject: [PATCH 410/492] korina: reset resource buffer size to 1536

The new value is the one used in the external patch before and allows at
least a standard MTU of 1500 to be handled correctly. Impact of this
change gets visible when bigger packets are to be received, issuing:
| ping -s 492 <IP>
and bigger payload sized led to 100% packet loss.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/korina.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index fefb33db79a..e30c2f437d1 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -84,7 +84,10 @@
 #define KORINA_NUM_RDS	64  /* number of receive descriptors */
 #define KORINA_NUM_TDS	64  /* number of transmit descriptors */
 
-#define KORINA_RBSIZE	536 /* size of one resource buffer = Ether MTU */
+/* KORINA_RBSIZE is the hardware's default maximum receive
+ * frame size in bytes. Having this hardcoded means that there
+ * is no support for MTU sizes greater than 1500. */
+#define KORINA_RBSIZE	1536 /* size of one resource buffer = Ether MTU */
 #define KORINA_RDS_MASK	(KORINA_NUM_RDS - 1)
 #define KORINA_TDS_MASK	(KORINA_NUM_TDS - 1)
 #define RD_RING_SIZE 	(KORINA_NUM_RDS * sizeof(struct dma_desc))
-- 
GitLab


From beb0babfb77eab0cbcc7f64a7b8f3545fec5c0ba Mon Sep 17 00:00:00 2001
From: Phil Sutter <n0-1@freewrt.org>
Date: Wed, 14 Jan 2009 21:48:24 -0800
Subject: [PATCH 411/492] korina: disable napi on close and restart

Without this the driver will crash when the NIC is being restarted.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/korina.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index e30c2f437d1..65b8487c189 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -904,6 +904,8 @@ static int korina_restart(struct net_device *dev)
 
 	korina_free_ring(dev);
 
+	napi_disable(&lp->napi);
+
 	ret = korina_init(dev);
 	if (ret < 0) {
 		printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
@@ -1070,6 +1072,8 @@ static int korina_close(struct net_device *dev)
 
 	korina_free_ring(dev);
 
+	napi_disable(&lp->napi);
+
 	free_irq(lp->rx_irq, dev);
 	free_irq(lp->tx_irq, dev);
 	free_irq(lp->ovr_irq, dev);
-- 
GitLab


From 4cf83b664fc14f8262d3013566ca36645f891df2 Mon Sep 17 00:00:00 2001
From: Phil Sutter <n0-1@freewrt.org>
Date: Wed, 14 Jan 2009 21:48:59 -0800
Subject: [PATCH 412/492] korina: rework korina_rx() for use with napi

This function needs an early exit condition to function properly, or
else caller assumes napi workload wasn't enough to handle all received
packets and korina_rx is called again (and again and again and ...).

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/korina.c | 109 +++++++++++++++++++++----------------------
 1 file changed, 53 insertions(+), 56 deletions(-)

diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 65b8487c189..a1d8af7d0bc 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -353,15 +353,20 @@ static int korina_rx(struct net_device *dev, int limit)
 	struct dma_desc *rd = &lp->rd_ring[lp->rx_next_done];
 	struct sk_buff *skb, *skb_new;
 	u8 *pkt_buf;
-	u32 devcs, pkt_len, dmas, rx_free_desc;
+	u32 devcs, pkt_len, dmas;
 	int count;
 
 	dma_cache_inv((u32)rd, sizeof(*rd));
 
 	for (count = 0; count < limit; count++) {
+		skb = lp->rx_skb[lp->rx_next_done];
+		skb_new = NULL;
 
 		devcs = rd->devcs;
 
+		if ((KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) == 0)
+			break;
+
 		/* Update statistics counters */
 		if (devcs & ETH_RX_CRC)
 			dev->stats.rx_crc_errors++;
@@ -384,63 +389,55 @@ static int korina_rx(struct net_device *dev, int limit)
 			 * in Rc32434 (errata ref #077) */
 			dev->stats.rx_errors++;
 			dev->stats.rx_dropped++;
-		}
-
-		while ((rx_free_desc = KORINA_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) {
-			/* init the var. used for the later
-			 * operations within the while loop */
-			skb_new = NULL;
+		} else if ((devcs & ETH_RX_ROK)) {
 			pkt_len = RCVPKT_LENGTH(devcs);
-			skb = lp->rx_skb[lp->rx_next_done];
-
-			if ((devcs & ETH_RX_ROK)) {
-				/* must be the (first and) last
-				 * descriptor then */
-				pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
-
-				/* invalidate the cache */
-				dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
-
-				/* Malloc up new buffer. */
-				skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
-
-				if (!skb_new)
-					break;
-				/* Do not count the CRC */
-				skb_put(skb, pkt_len - 4);
-				skb->protocol = eth_type_trans(skb, dev);
-
-				/* Pass the packet to upper layers */
-				netif_receive_skb(skb);
-				dev->stats.rx_packets++;
-				dev->stats.rx_bytes += pkt_len;
-
-				/* Update the mcast stats */
-				if (devcs & ETH_RX_MP)
-					dev->stats.multicast++;
-
-				lp->rx_skb[lp->rx_next_done] = skb_new;
-			}
-
-			rd->devcs = 0;
-
-			/* Restore descriptor's curr_addr */
-			if (skb_new)
-				rd->ca = CPHYSADDR(skb_new->data);
-			else
-				rd->ca = CPHYSADDR(skb->data);
-
-			rd->control = DMA_COUNT(KORINA_RBSIZE) |
-				DMA_DESC_COD | DMA_DESC_IOD;
-			lp->rd_ring[(lp->rx_next_done - 1) &
-				KORINA_RDS_MASK].control &=
-				~DMA_DESC_COD;
-
-			lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
-			dma_cache_wback((u32)rd, sizeof(*rd));
-			rd = &lp->rd_ring[lp->rx_next_done];
-			writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
+
+			/* must be the (first and) last
+			 * descriptor then */
+			pkt_buf = (u8 *)lp->rx_skb[lp->rx_next_done]->data;
+
+			/* invalidate the cache */
+			dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
+
+			/* Malloc up new buffer. */
+			skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+
+			if (!skb_new)
+				break;
+			/* Do not count the CRC */
+			skb_put(skb, pkt_len - 4);
+			skb->protocol = eth_type_trans(skb, dev);
+
+			/* Pass the packet to upper layers */
+			netif_receive_skb(skb);
+			dev->stats.rx_packets++;
+			dev->stats.rx_bytes += pkt_len;
+
+			/* Update the mcast stats */
+			if (devcs & ETH_RX_MP)
+				dev->stats.multicast++;
+
+			lp->rx_skb[lp->rx_next_done] = skb_new;
 		}
+
+		rd->devcs = 0;
+
+		/* Restore descriptor's curr_addr */
+		if (skb_new)
+			rd->ca = CPHYSADDR(skb_new->data);
+		else
+			rd->ca = CPHYSADDR(skb->data);
+
+		rd->control = DMA_COUNT(KORINA_RBSIZE) |
+			DMA_DESC_COD | DMA_DESC_IOD;
+		lp->rd_ring[(lp->rx_next_done - 1) &
+			KORINA_RDS_MASK].control &=
+			~DMA_DESC_COD;
+
+		lp->rx_next_done = (lp->rx_next_done + 1) & KORINA_RDS_MASK;
+		dma_cache_wback((u32)rd, sizeof(*rd));
+		rd = &lp->rd_ring[lp->rx_next_done];
+		writel(~DMA_STAT_DONE, &lp->rx_dma_regs->dmas);
 	}
 
 	dmas = readl(&lp->rx_dma_regs->dmas);
-- 
GitLab


From 4676f63d4c1e2e3530e42cb39bf88a1c1d4d78a5 Mon Sep 17 00:00:00 2001
From: Phil Sutter <n0-1@freewrt.org>
Date: Wed, 14 Jan 2009 21:49:39 -0800
Subject: [PATCH 413/492] korina: do schedule napi after testing for it

The called netif_rx_schedule() does all the work for us:
- it checks the return value of netif_rx_schedule_prep() and
- if everything is ok calls __netif_rx_schedule().
Before this change, the driver received absolutely nothing.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/korina.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index a1d8af7d0bc..7aa05f81fe9 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -330,7 +330,7 @@ static irqreturn_t korina_rx_dma_interrupt(int irq, void *dev_id)
 
 	dmas = readl(&lp->rx_dma_regs->dmas);
 	if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
-		netif_rx_schedule_prep(&lp->napi);
+		netif_rx_schedule(&lp->napi);
 
 		dmasm = readl(&lp->rx_dma_regs->dmasm);
 		writel(dmasm | (DMA_STAT_DONE |
-- 
GitLab


From 60d3f9827ca455e7272681d67a37137c328d7012 Mon Sep 17 00:00:00 2001
From: Phil Sutter <n0-1@freewrt.org>
Date: Wed, 14 Jan 2009 21:50:12 -0800
Subject: [PATCH 414/492] korina: do tx at the right position

Triggering TX before the write to the DMA status mask register leads to
transferring packets with maximum payload no matter what the actual
packet size is.
While here, also trigger RX scheduling after writing the DMA status mask
register, like it was in the original driver before it was sent
upstream.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/korina.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 7aa05f81fe9..dced5e71463 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -330,13 +330,13 @@ static irqreturn_t korina_rx_dma_interrupt(int irq, void *dev_id)
 
 	dmas = readl(&lp->rx_dma_regs->dmas);
 	if (dmas & (DMA_STAT_DONE | DMA_STAT_HALT | DMA_STAT_ERR)) {
-		netif_rx_schedule(&lp->napi);
-
 		dmasm = readl(&lp->rx_dma_regs->dmasm);
 		writel(dmasm | (DMA_STAT_DONE |
 				DMA_STAT_HALT | DMA_STAT_ERR),
 				&lp->rx_dma_regs->dmasm);
 
+		netif_rx_schedule(&lp->napi);
+
 		if (dmas & DMA_STAT_ERR)
 			printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
 
@@ -623,12 +623,12 @@ korina_tx_dma_interrupt(int irq, void *dev_id)
 	dmas = readl(&lp->tx_dma_regs->dmas);
 
 	if (dmas & (DMA_STAT_FINI | DMA_STAT_ERR)) {
-		korina_tx(dev);
-
 		dmasm = readl(&lp->tx_dma_regs->dmasm);
 		writel(dmasm | (DMA_STAT_FINI | DMA_STAT_ERR),
 				&lp->tx_dma_regs->dmasm);
 
+		korina_tx(dev);
+
 		if (lp->tx_chain_status == desc_filled &&
 			(readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
 			writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
-- 
GitLab


From 97bc477cbc3d63f2a29c2c81031434b3a082f44c Mon Sep 17 00:00:00 2001
From: Phil Sutter <n0-1@freewrt.org>
Date: Wed, 14 Jan 2009 21:50:41 -0800
Subject: [PATCH 415/492] korina: fix handling tx_chain_tail

Originally this must have been a rewrite error when introducing
'chain_index'. But the original driver did not use the previous chain
item everywhere: when altering the address tx_chain_tail points to, it
should move forward, not backwards.
Also this is not an "index" but rather the penultimate element in the
chain, so rename it accordingly.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/korina.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index dced5e71463..f2001750251 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -199,7 +199,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
 	struct korina_private *lp = netdev_priv(dev);
 	unsigned long flags;
 	u32 length;
-	u32 chain_index;
+	u32 chain_prev, chain_next;
 	struct dma_desc *td;
 
 	spin_lock_irqsave(&lp->lock, flags);
@@ -231,8 +231,8 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
 	/* Setup the transmit descriptor. */
 	dma_cache_inv((u32) td, sizeof(*td));
 	td->ca = CPHYSADDR(skb->data);
-	chain_index = (lp->tx_chain_tail - 1) &
-			KORINA_TDS_MASK;
+	chain_prev = (lp->tx_chain_tail - 1) & KORINA_TDS_MASK;
+	chain_next = (lp->tx_chain_tail + 1) & KORINA_TDS_MASK;
 
 	if (readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
 		if (lp->tx_chain_status == desc_empty) {
@@ -240,7 +240,7 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
 			td->control = DMA_COUNT(length) |
 					DMA_DESC_COF | DMA_DESC_IOF;
 			/* Move tail */
-			lp->tx_chain_tail = chain_index;
+			lp->tx_chain_tail = chain_next;
 			/* Write to NDPTR */
 			writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
 					&lp->tx_dma_regs->dmandptr);
@@ -251,12 +251,12 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
 			td->control = DMA_COUNT(length) |
 					DMA_DESC_COF | DMA_DESC_IOF;
 			/* Link to prev */
-			lp->td_ring[chain_index].control &=
+			lp->td_ring[chain_prev].control &=
 					~DMA_DESC_COF;
 			/* Link to prev */
-			lp->td_ring[chain_index].link =  CPHYSADDR(td);
+			lp->td_ring[chain_prev].link =  CPHYSADDR(td);
 			/* Move tail */
-			lp->tx_chain_tail = chain_index;
+			lp->tx_chain_tail = chain_next;
 			/* Write to NDPTR */
 			writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]),
 					&(lp->tx_dma_regs->dmandptr));
@@ -270,17 +270,17 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
 			td->control = DMA_COUNT(length) |
 					DMA_DESC_COF | DMA_DESC_IOF;
 			/* Move tail */
-			lp->tx_chain_tail = chain_index;
+			lp->tx_chain_tail = chain_next;
 			lp->tx_chain_status = desc_filled;
 			netif_stop_queue(dev);
 		} else {
 			/* Update tail */
 			td->control = DMA_COUNT(length) |
 					DMA_DESC_COF | DMA_DESC_IOF;
-			lp->td_ring[chain_index].control &=
+			lp->td_ring[chain_prev].control &=
 					~DMA_DESC_COF;
-			lp->td_ring[chain_index].link =  CPHYSADDR(td);
-			lp->tx_chain_tail = chain_index;
+			lp->td_ring[chain_prev].link =  CPHYSADDR(td);
+			lp->tx_chain_tail = chain_next;
 		}
 	}
 	dma_cache_wback((u32) td, sizeof(*td));
-- 
GitLab


From 5edc7668bbece4238a32943ae7a47135af076948 Mon Sep 17 00:00:00 2001
From: Phil Sutter <n0-1@freewrt.org>
Date: Wed, 14 Jan 2009 21:51:15 -0800
Subject: [PATCH 416/492] korina: do not stop queue here

Apparently this doesn't make sense. Otherwise the queue gets disabled as
soon as it's getting empty and can only be resurrected by a driver
restart.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/korina.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index f2001750251..bd33fa91599 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -272,7 +272,6 @@ static int korina_send_packet(struct sk_buff *skb, struct net_device *dev)
 			/* Move tail */
 			lp->tx_chain_tail = chain_next;
 			lp->tx_chain_status = desc_filled;
-			netif_stop_queue(dev);
 		} else {
 			/* Update tail */
 			td->control = DMA_COUNT(length) |
-- 
GitLab


From 1c5625cf0f121486abad4da0e0251ec67765aa95 Mon Sep 17 00:00:00 2001
From: Phil Sutter <n0-1@freewrt.org>
Date: Wed, 14 Jan 2009 21:51:48 -0800
Subject: [PATCH 417/492] korina: do not use IRQF_SHARED with IRQF_DISABLED

As the kernel warning states: "IRQF_DISABLED is not guaranteed on shared
IRQs". Since these IRQs' values are hardcoded and my test system doesn't
show any shared use of IRQs at all, rather make them non-shared than
non-disabled.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/korina.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index bd33fa91599..1d6e48e1336 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -1000,14 +1000,14 @@ static int korina_open(struct net_device *dev)
 	 * that handles the Done Finished
 	 * Ovr and Und Events */
 	ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
-		IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Rx", dev);
+			IRQF_DISABLED, "Korina ethernet Rx", dev);
 	if (ret < 0) {
 		printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
 		    dev->name, lp->rx_irq);
 		goto err_release;
 	}
 	ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
-		IRQF_SHARED | IRQF_DISABLED, "Korina ethernet Tx", dev);
+			IRQF_DISABLED, "Korina ethernet Tx", dev);
 	if (ret < 0) {
 		printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
 		    dev->name, lp->tx_irq);
@@ -1016,7 +1016,7 @@ static int korina_open(struct net_device *dev)
 
 	/* Install handler for overrun error. */
 	ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
-			IRQF_SHARED | IRQF_DISABLED, "Ethernet Overflow", dev);
+			IRQF_DISABLED, "Ethernet Overflow", dev);
 	if (ret < 0) {
 		printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
 		    dev->name, lp->ovr_irq);
@@ -1025,7 +1025,7 @@ static int korina_open(struct net_device *dev)
 
 	/* Install handler for underflow error. */
 	ret = request_irq(lp->und_irq, &korina_und_interrupt,
-			IRQF_SHARED | IRQF_DISABLED, "Ethernet Underflow", dev);
+			IRQF_DISABLED, "Ethernet Underflow", dev);
 	if (ret < 0) {
 		printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
 		    dev->name, lp->und_irq);
-- 
GitLab


From 7a0b6e01434f77194b86c8051b4c3718da636c64 Mon Sep 17 00:00:00 2001
From: Isaku Yamahata <yamahata@valinux.co.jp>
Date: Thu, 15 Jan 2009 15:16:55 +0900
Subject: [PATCH 418/492] [IA64] Update to use account_{steal,idle}_ticks

This patch fixes the following errors caused by
79741dd35713ff4f6fd0eafd59fa94e8a4ba922d which changed
the prototypes of account_steal_time() and account_idle_time().

>   CC      arch/ia64/xen/time.o
> arch/ia64/xen/time.c: In function 'consider_steal_time':
> arch/ia64/xen/time.c:132: warning: passing argument 1 of 'account_steal_time' makes integer from pointer without a cast
> arch/ia64/xen/time.c:132: error: too many arguments to function 'account_steal_time'
> arch/ia64/xen/time.c:133: warning: passing argument 1 of 'account_steal_time' makes integer from pointer without a cast
> arch/ia64/xen/time.c:133: error: too many arguments to function 'account_steal_time'

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/xen/time.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/ia64/xen/time.c b/arch/ia64/xen/time.c
index d15a94c330f..68d6204c3f1 100644
--- a/arch/ia64/xen/time.c
+++ b/arch/ia64/xen/time.c
@@ -129,8 +129,8 @@ consider_steal_time(unsigned long new_itm)
 		blocked = stolentick;
 
 	if (stolen > 0 || blocked > 0) {
-		account_steal_time(NULL, jiffies_to_cputime(stolen));
-		account_steal_time(idle_task(cpu), jiffies_to_cputime(blocked));
+		account_steal_ticks(stolen);
+		account_idle_ticks(blocked);
 		run_local_timers();
 
 		if (rcu_pending(cpu))
-- 
GitLab


From 0773a6cf673316440999752e23f8c3d4f85e48b9 Mon Sep 17 00:00:00 2001
From: Tony Luck <tony.luck@intel.com>
Date: Thu, 15 Jan 2009 10:29:17 -0800
Subject: [PATCH 419/492] [IA64] Turn on CONFIG_HAVE_UNSTABLE_CLOCK

sched_clock() on ia64 is based on ar.itc, so is never
completely synchronized between cpus. On some platforms
(e.g. certain models of SGI Altix) it may be running at
radically different frequencies.

Based on a patch from Dimitri Sivanich which set this
just for SN2 && GENERIC kernels ... it is needed for
all ia64 machines.

Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 3d31636cbaf..6183aeccecf 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -17,6 +17,7 @@ config IA64
 	select ACPI if (!IA64_HP_SIM)
 	select PM if (!IA64_HP_SIM)
 	select ARCH_SUPPORTS_MSI
+	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
-- 
GitLab


From 88fc241f54459ac3d86c5e13b449730199f66061 Mon Sep 17 00:00:00 2001
From: Doug Chapman <doug.chapman@hp.com>
Date: Thu, 15 Jan 2009 10:38:56 -0800
Subject: [PATCH 420/492] [IA64] dump stack on kernel unaligned warnings

Often the cause of kernel unaligned access warnings is not
obvious from just the ip displayed in the warning.  This adds
the option via proc to dump the stack in addition to the warning.
The default is off (just display the 1 line warning).  To enable
the stack to be shown: echo 1 > /proc/sys/kernel/unaligned-dump-stack

Signed-off-by: Doug Chapman <doug.chapman@hp.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/unaligned.c | 6 +++++-
 kernel/sysctl.c              | 9 +++++++++
 2 files changed, 14 insertions(+), 1 deletion(-)

diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c
index ff0e7c10faa..6db08599ebb 100644
--- a/arch/ia64/kernel/unaligned.c
+++ b/arch/ia64/kernel/unaligned.c
@@ -59,6 +59,7 @@ dump (const char *str, void *vp, size_t len)
  *  (i.e. don't allow attacker to fill up logs with unaligned accesses).
  */
 int no_unaligned_warning;
+int unaligned_dump_stack;
 static int noprint_warning;
 
 /*
@@ -1371,9 +1372,12 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			}
 		}
 	} else {
-		if (within_logging_rate_limit())
+		if (within_logging_rate_limit()) {
 			printk(KERN_WARNING "kernel unaligned access to 0x%016lx, ip=0x%016lx\n",
 			       ifa, regs->cr_iip + ipsr->ri);
+			if (unaligned_dump_stack)
+				dump_stack();
+		}
 		set_fs(KERNEL_DS);
 	}
 
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 3e38b74b612..368d1638ee7 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -144,6 +144,7 @@ extern int acct_parm[];
 
 #ifdef CONFIG_IA64
 extern int no_unaligned_warning;
+extern int unaligned_dump_stack;
 #endif
 
 #ifdef CONFIG_RT_MUTEXES
@@ -781,6 +782,14 @@ static struct ctl_table kern_table[] = {
 	 	.mode		= 0644,
 		.proc_handler	= &proc_dointvec,
 	},
+	{
+		.ctl_name	= CTL_UNNUMBERED,
+		.procname	= "unaligned-dump-stack",
+		.data		= &unaligned_dump_stack,
+		.maxlen		= sizeof (int),
+		.mode		= 0644,
+		.proc_handler	= &proc_dointvec,
+	},
 #endif
 #ifdef CONFIG_DETECT_SOFTLOCKUP
 	{
-- 
GitLab


From a6a3bb5c88d706c5efe0c86b3b669ac9ee012b3f Mon Sep 17 00:00:00 2001
From: Brent Casavant <bcasavan@sgi.com>
Date: Wed, 10 Dec 2008 09:46:16 -0600
Subject: [PATCH 421/492] [IA64] generic_defconfig: Enable SATA_VITESSE

CONFIG_SATA_VITESSE=y was not added to generic_defconfig when
sn2_defconfig was removed.  SGI Altix systems that use an IO10
base IO card to drive the root device are unable to boot without
the Vitesse controller.

Signed-off-by: Brent Casavant <bcasavan@sgi.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/configs/generic_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 27eb67604c5..a109db30ce5 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -578,7 +578,7 @@ CONFIG_ATA_PIIX=y
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
+CONFIG_SATA_VITESSE=y
 # CONFIG_SATA_INIC162X is not set
 # CONFIG_PATA_ACPI is not set
 # CONFIG_PATA_ALI is not set
-- 
GitLab


From 175add1981e53d22caba8f42d5f924a4de507b6c Mon Sep 17 00:00:00 2001
From: John Keller <jpk@sgi.com>
Date: Mon, 24 Nov 2008 16:47:17 -0600
Subject: [PATCH 422/492] [IA64] SN specific version of dma_get_required_mask()

Create a platform specific version of dma_get_required_mask()
for ia64 SN Altix. All SN Altix platforms support 64 bit DMA
addressing regardless of the size of system memory.
Create an ia64 machvec for dma_get_required_mask, with the
SN version unconditionally returning DMA_64BIT_MASK.

Signed-off-by: John Keller <jpk@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 Documentation/DMA-API.txt            |  9 ++++-----
 arch/ia64/include/asm/dma-mapping.h  |  2 ++
 arch/ia64/include/asm/machvec.h      |  7 +++++++
 arch/ia64/include/asm/machvec_init.h |  1 +
 arch/ia64/include/asm/machvec_sn2.h  |  2 ++
 arch/ia64/pci/pci.c                  | 27 +++++++++++++++++++++++++++
 arch/ia64/sn/pci/pci_dma.c           |  6 ++++++
 7 files changed, 49 insertions(+), 5 deletions(-)

diff --git a/Documentation/DMA-API.txt b/Documentation/DMA-API.txt
index b462bb14954..52441694fe0 100644
--- a/Documentation/DMA-API.txt
+++ b/Documentation/DMA-API.txt
@@ -170,16 +170,15 @@ Returns: 0 if successful and a negative error if not.
 u64
 dma_get_required_mask(struct device *dev)
 
-After setting the mask with dma_set_mask(), this API returns the
-actual mask (within that already set) that the platform actually
-requires to operate efficiently.  Usually this means the returned mask
+This API returns the mask that the platform requires to
+operate efficiently.  Usually this means the returned mask
 is the minimum required to cover all of memory.  Examining the
 required mask gives drivers with variable descriptor sizes the
 opportunity to use smaller descriptors as necessary.
 
 Requesting the required mask does not alter the current mask.  If you
-wish to take advantage of it, you should issue another dma_set_mask()
-call to lower the mask again.
+wish to take advantage of it, you should issue a dma_set_mask()
+call to set the mask to the value returned.
 
 
 Part Id - Streaming DMA mappings
diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
index bbab7e2b0fc..1f912d92758 100644
--- a/arch/ia64/include/asm/dma-mapping.h
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -9,6 +9,8 @@
 #include <linux/scatterlist.h>
 #include <asm/swiotlb.h>
 
+#define ARCH_HAS_DMA_GET_REQUIRED_MASK
+
 struct dma_mapping_ops {
 	int             (*mapping_error)(struct device *dev,
 					 dma_addr_t dma_addr);
diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h
index 59c17e44668..fe87b212170 100644
--- a/arch/ia64/include/asm/machvec.h
+++ b/arch/ia64/include/asm/machvec.h
@@ -62,6 +62,7 @@ typedef dma_addr_t ia64_mv_dma_map_single_attrs (struct device *, void *, size_t
 typedef void ia64_mv_dma_unmap_single_attrs (struct device *, dma_addr_t, size_t, int, struct dma_attrs *);
 typedef int ia64_mv_dma_map_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
 typedef void ia64_mv_dma_unmap_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
+typedef u64 ia64_mv_dma_get_required_mask (struct device *);
 
 /*
  * WARNING: The legacy I/O space is _architected_.  Platforms are
@@ -159,6 +160,7 @@ extern void machvec_tlb_migrate_finish (struct mm_struct *);
 #  define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device
 #  define platform_dma_mapping_error		ia64_mv.dma_mapping_error
 #  define platform_dma_supported	ia64_mv.dma_supported
+#  define platform_dma_get_required_mask ia64_mv.dma_get_required_mask
 #  define platform_irq_to_vector	ia64_mv.irq_to_vector
 #  define platform_local_vector_to_irq	ia64_mv.local_vector_to_irq
 #  define platform_pci_get_legacy_mem	ia64_mv.pci_get_legacy_mem
@@ -213,6 +215,7 @@ struct ia64_machine_vector {
 	ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device;
 	ia64_mv_dma_mapping_error *dma_mapping_error;
 	ia64_mv_dma_supported *dma_supported;
+	ia64_mv_dma_get_required_mask *dma_get_required_mask;
 	ia64_mv_irq_to_vector *irq_to_vector;
 	ia64_mv_local_vector_to_irq *local_vector_to_irq;
 	ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem;
@@ -263,6 +266,7 @@ struct ia64_machine_vector {
 	platform_dma_sync_sg_for_device,	\
 	platform_dma_mapping_error,			\
 	platform_dma_supported,			\
+	platform_dma_get_required_mask,		\
 	platform_irq_to_vector,			\
 	platform_local_vector_to_irq,		\
 	platform_pci_get_legacy_mem,		\
@@ -366,6 +370,9 @@ extern void machvec_init_from_cmdline(const char *cmdline);
 #ifndef platform_dma_supported
 # define  platform_dma_supported	swiotlb_dma_supported
 #endif
+#ifndef platform_dma_get_required_mask
+# define  platform_dma_get_required_mask	ia64_dma_get_required_mask
+#endif
 #ifndef platform_irq_to_vector
 # define platform_irq_to_vector		__ia64_irq_to_vector
 #endif
diff --git a/arch/ia64/include/asm/machvec_init.h b/arch/ia64/include/asm/machvec_init.h
index ef964b28684..37a469849ab 100644
--- a/arch/ia64/include/asm/machvec_init.h
+++ b/arch/ia64/include/asm/machvec_init.h
@@ -3,6 +3,7 @@
 
 extern ia64_mv_send_ipi_t ia64_send_ipi;
 extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
+extern ia64_mv_dma_get_required_mask ia64_dma_get_required_mask;
 extern ia64_mv_irq_to_vector __ia64_irq_to_vector;
 extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
 extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
diff --git a/arch/ia64/include/asm/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h
index 781308ea7b8..f1a6e0d6dfa 100644
--- a/arch/ia64/include/asm/machvec_sn2.h
+++ b/arch/ia64/include/asm/machvec_sn2.h
@@ -67,6 +67,7 @@ extern ia64_mv_dma_sync_single_for_device sn_dma_sync_single_for_device;
 extern ia64_mv_dma_sync_sg_for_device	sn_dma_sync_sg_for_device;
 extern ia64_mv_dma_mapping_error	sn_dma_mapping_error;
 extern ia64_mv_dma_supported		sn_dma_supported;
+extern ia64_mv_dma_get_required_mask	sn_dma_get_required_mask;
 extern ia64_mv_migrate_t		sn_migrate;
 extern ia64_mv_kernel_launch_event_t	sn_kernel_launch_event;
 extern ia64_mv_setup_msi_irq_t		sn_setup_msi_irq;
@@ -123,6 +124,7 @@ extern ia64_mv_pci_fixup_bus_t		sn_pci_fixup_bus;
 #define platform_dma_sync_sg_for_device	sn_dma_sync_sg_for_device
 #define platform_dma_mapping_error		sn_dma_mapping_error
 #define platform_dma_supported		sn_dma_supported
+#define platform_dma_get_required_mask	sn_dma_get_required_mask
 #define platform_migrate		sn_migrate
 #define platform_kernel_launch_event    sn_kernel_launch_event
 #ifdef CONFIG_PCI_MSI
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 211fcfd115f..61f1af5c23c 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -19,6 +19,7 @@
 #include <linux/ioport.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/bootmem.h>
 
 #include <asm/machvec.h>
 #include <asm/page.h>
@@ -748,6 +749,32 @@ static void __init set_pci_cacheline_size(void)
 	pci_cache_line_size = (1 << cci.pcci_line_size) / 4;
 }
 
+u64 ia64_dma_get_required_mask(struct device *dev)
+{
+	u32 low_totalram = ((max_pfn - 1) << PAGE_SHIFT);
+	u32 high_totalram = ((max_pfn - 1) >> (32 - PAGE_SHIFT));
+	u64 mask;
+
+	if (!high_totalram) {
+		/* convert to mask just covering totalram */
+		low_totalram = (1 << (fls(low_totalram) - 1));
+		low_totalram += low_totalram - 1;
+		mask = low_totalram;
+	} else {
+		high_totalram = (1 << (fls(high_totalram) - 1));
+		high_totalram += high_totalram - 1;
+		mask = (((u64)high_totalram) << 32) + 0xffffffff;
+	}
+	return mask;
+}
+EXPORT_SYMBOL_GPL(ia64_dma_get_required_mask);
+
+u64 dma_get_required_mask(struct device *dev)
+{
+	return platform_dma_get_required_mask(dev);
+}
+EXPORT_SYMBOL_GPL(dma_get_required_mask);
+
 static int __init pcibios_init(void)
 {
 	set_pci_cacheline_size();
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 53ebb648449..863f5017baa 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -356,6 +356,12 @@ int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 }
 EXPORT_SYMBOL(sn_dma_mapping_error);
 
+u64 sn_dma_get_required_mask(struct device *dev)
+{
+	return DMA_64BIT_MASK;
+}
+EXPORT_SYMBOL_GPL(sn_dma_get_required_mask);
+
 char *sn_pci_get_legacy_mem(struct pci_bus *bus)
 {
 	if (!SN_PCIBUS_BUSSOFT(bus))
-- 
GitLab


From 6272d68cc6a5f90c6b1a2228cf0f67b895305d17 Mon Sep 17 00:00:00 2001
From: Lin Ming <ming.m.lin@intel.com>
Date: Thu, 15 Jan 2009 17:17:15 +0100
Subject: [PATCH 423/492] sched: sched_slice() fixlet

Mike's change: 0a582440f "sched: fix sched_slice())" broke group
scheduling by forgetting to reload cfs_rq on each loop.

This patch fixes aim7 regression and specjbb2005 regression becomes
less than 1.5% on 8-core stokley.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Jayson King <dev@jaysonking.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_fair.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index 16b419bb8b0..5cc1c162044 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -429,7 +429,10 @@ static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se)
 	u64 slice = __sched_period(cfs_rq->nr_running + !se->on_rq);
 
 	for_each_sched_entity(se) {
-		struct load_weight *load = &cfs_rq->load;
+		struct load_weight *load;
+
+		cfs_rq = cfs_rq_of(se);
+		load = &cfs_rq->load;
 
 		if (unlikely(!se->on_rq)) {
 			struct load_weight lw = cfs_rq->load;
-- 
GitLab


From c0253eec2a8e1140dd9672a1efe095cdcf5811d0 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Thu, 15 Jan 2009 13:30:25 +0000
Subject: [PATCH 424/492] tty: Fix race in the flush for some ldiscs

If you issue an ioctl to flush a tty as the line discipline is changing or
otherwise unplugged you can get a crash. The bug is very old but the rest
of the BKL lock dropping and some very "good" luck on Ingo's part caught
an example.

Use the correct ldisc_ref form so that we wait for the ldisc change to
complete and then flush

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tty_ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index a408c8e487e..6f4c7d0a53b 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -1057,7 +1057,7 @@ int tty_perform_flush(struct tty_struct *tty, unsigned long arg)
 	if (retval)
 		return retval;
 
-	ld = tty_ldisc_ref(tty);
+	ld = tty_ldisc_ref_wait(tty);
 	switch (arg) {
 	case TCIFLUSH:
 		if (ld && ld->ops->flush_buffer)
-- 
GitLab


From 25cf9bc1fcb085daaeb82b09bab0fb3c40570887 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Thu, 15 Jan 2009 13:30:34 +0000
Subject: [PATCH 425/492] 8250_pci: add support for netmos 9835 IBM devices

Most of netmos 9835 hardware is handled by parport-serial.  IBM introduces
a device which doesn't have any parallel ports and have screwed subdevice
PCI id (not corresponding to port numbers).

Handle this device (9710:9835 1014:0299) properly.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250_pci.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index c088146b751..2a3671233b1 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -602,6 +602,10 @@ static int pci_netmos_init(struct pci_dev *dev)
 	/* subdevice 0x00PS means <P> parallel, <S> serial */
 	unsigned int num_serial = dev->subsystem_device & 0xf;
 
+	if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM &&
+			dev->subsystem_device == 0x0299)
+		return 0;
+
 	if (num_serial == 0)
 		return -ENODEV;
 	return num_serial;
@@ -3096,6 +3100,10 @@ static struct pci_device_id serial_pci_tbl[] = {
 		0,
 		pbn_b0_8_115200 },
 
+	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+		PCI_VENDOR_ID_IBM, 0x0299,
+		0, 0, pbn_b0_bt_2_115200 },
+
 	/*
 	 * These entries match devices with class COMMUNICATION_SERIAL,
 	 * COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
-- 
GitLab


From 7fdd4f76e9a289592d020538f1837a7541ea89ff Mon Sep 17 00:00:00 2001
From: Daniel Gagnon <daniel.gagnon@yahoo.com>
Date: Thu, 15 Jan 2009 13:30:45 +0000
Subject: [PATCH 426/492] serial: Add SupraExpress 336i PnP Voice Modem

Add SupraExpress 336i PnP Voice Modem

Tested and working with the following device: (output from lspnp -v)
01:01.00 SUP1381 (unknown)
    state = active
	io 0x2f8-0x2ff
	irq 3

Signed-off-by: Daniel Gagnon <daniel.gagnon@yahoo.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250_pnp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index fde7f9ccf57..bbcfc26a3b6 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -270,6 +270,8 @@ static const struct pnp_device_id pnp_dev_table[] = {
 	{       "RSS0250",              0       },
 	/* SupraExpress 28.8 Data/Fax PnP modem */
 	{	"SUP1310",		0	},
+	/* SupraExpress 336i PnP Voice Modem */
+	{	"SUP1381",		0	},
 	/* SupraExpress 33.6 Data/Fax PnP modem */
 	{	"SUP1421",		0	},
 	/* SupraExpress 33.6 Data/Fax PnP modem */
-- 
GitLab


From cd1e40f0981e22018373307cd4087dc876b08fb0 Mon Sep 17 00:00:00 2001
From: Mischa Jonker <mischa.jonker@nxp.com>
Date: Thu, 15 Jan 2009 13:30:56 +0000
Subject: [PATCH 427/492] When a break signal is detected, the next character
 should be ignored.

This was not implemented correctly for the pnx8xxx_uart driver.

[From further discussion:
Correct, you can look to it as two separate bugs:
a) the next character is not ignored while it should;
b) the status bits 31-8 are copied to the 'ch' variable while they shouldn't.

Both bugs prevent correct break signal handling (and therefore correct
behaviour of the magic SysRq key). Bug b didn't cause too much trouble
earlier because in most situations the status bits are all zero; for
this case they unfortunately aren't.
]

Signed-off-by: Mischa Jonker <mischa.jonker@nxp.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/pnx8xxx_uart.c | 23 ++++++++++++-----------
 1 file changed, 12 insertions(+), 11 deletions(-)

diff --git a/drivers/serial/pnx8xxx_uart.c b/drivers/serial/pnx8xxx_uart.c
index 22e30d21225..1bb8f1b4576 100644
--- a/drivers/serial/pnx8xxx_uart.c
+++ b/drivers/serial/pnx8xxx_uart.c
@@ -187,7 +187,7 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
 	status = FIFO_TO_SM(serial_in(sport, PNX8XXX_FIFO)) |
 		 ISTAT_TO_SM(serial_in(sport, PNX8XXX_ISTAT));
 	while (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFIFO)) {
-		ch = serial_in(sport, PNX8XXX_FIFO);
+		ch = serial_in(sport, PNX8XXX_FIFO) & 0xff;
 
 		sport->port.icount.rx++;
 
@@ -198,9 +198,16 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
 		 * out of the main execution path
 		 */
 		if (status & (FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE |
-					PNX8XXX_UART_FIFO_RXPAR) |
+					PNX8XXX_UART_FIFO_RXPAR |
+					PNX8XXX_UART_FIFO_RXBRK) |
 			      ISTAT_TO_SM(PNX8XXX_UART_INT_RXOVRN))) {
-			if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
+			if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXBRK)) {
+				status &= ~(FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE) |
+					FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR));
+				sport->port.icount.brk++;
+				if (uart_handle_break(&sport->port))
+					goto ignore_char;
+			} else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXPAR))
 				sport->port.icount.parity++;
 			else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
 				sport->port.icount.frame++;
@@ -284,14 +291,8 @@ static irqreturn_t pnx8xxx_int(int irq, void *dev_id)
 	/* Get the interrupts */
 	status  = serial_in(sport, PNX8XXX_ISTAT) & serial_in(sport, PNX8XXX_IEN);
 
-	/* Break signal received */
-	if (status & PNX8XXX_UART_INT_BREAK) {
-		sport->port.icount.brk++;
-		uart_handle_break(&sport->port);
-	}
-
-	/* Byte received */
-	if (status & PNX8XXX_UART_INT_RX)
+	/* Byte or break signal received */
+	if (status & (PNX8XXX_UART_INT_RX | PNX8XXX_UART_INT_BREAK))
 		pnx8xxx_rx_chars(sport);
 
 	/* TX holding register empty - transmit a byte */
-- 
GitLab


From a9fec7102f01f6464b19e13ffd9d8c48663379ad Mon Sep 17 00:00:00 2001
From: Jim Paris <jim@jtan.com>
Date: Thu, 15 Jan 2009 13:31:07 +0000
Subject: [PATCH 428/492] ftdi_sio: fix kref leak

Commit 4a90f09b20f4622dcbff1f0e1e6bae1704f8ad8c added kref stuff to
ftdi_sio, but missed tty_kref_put at one exit point in
ftdi_process_read.

Signed-off-by: Jim Paris <jim@jtan.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ftdi_sio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ef6cfa5a447..c70a8f667d8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2030,7 +2030,7 @@ static void ftdi_process_read(struct work_struct *work)
 			spin_unlock_irqrestore(&priv->rx_lock, flags);
 			dbg("%s - deferring remainder until unthrottled",
 					__func__);
-			return;
+			goto out;
 		}
 		spin_unlock_irqrestore(&priv->rx_lock, flags);
 		/* if the port is closed stop trying to read */
-- 
GitLab


From fe41cbb164a0dc55f3914a0e4cabe8240410157c Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Thu, 15 Jan 2009 13:31:15 +0000
Subject: [PATCH 429/492] tty: Fix a kref leak in the HSO driver on re-open

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/usb/hso.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index c4918b86ed1..9df04dd1332 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1297,6 +1297,7 @@ static int hso_serial_open(struct tty_struct *tty, struct file *filp)
 	/* setup */
 	spin_lock_irq(&serial->serial_lock);
 	tty->driver_data = serial;
+	tty_kref_put(serial->tty);
 	serial->tty = tty_kref_get(tty);
 	spin_unlock_irq(&serial->serial_lock);
 
-- 
GitLab


From d45eb81c3e345fabaf27ef3ab437b85c0bf9fafa Mon Sep 17 00:00:00 2001
From: Denis Joseph Barrow <D.Barrow@option.com>
Date: Thu, 15 Jan 2009 13:31:24 +0000
Subject: [PATCH 430/492] tty: Fix double grabbing of a spinlock

The HSO changes for kref introduced a recursive spinlock take. All
functions which call put_rxbuf_data already have serial->serial_lock
grabbed.

[Comment to code added-AC]

Signed-off-by: Denis Joseph Barrow <D.Barrow@option.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/usb/hso.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 9df04dd1332..e25a58f6ff6 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2044,9 +2044,8 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
 		return -2;
 	}
 
-	spin_lock(&serial->serial_lock);
+	/* All callers to put_rxbuf_data hold serial_lock */
 	tty = tty_kref_get(serial->tty);
-	spin_unlock(&serial->serial_lock);
 
 	/* Push data to tty */
 	if (tty) {
-- 
GitLab


From 5839b414f9f9d2d6a471988763b61dbf85eb2dba Mon Sep 17 00:00:00 2001
From: Denis Joseph Barrow <D.Barow@option.com>
Date: Thu, 15 Jan 2009 13:31:34 +0000
Subject: [PATCH 431/492] hso serial throttled tty kref fix.

This patch is for Alan Cox as it related to the tty layer.
Hopefully the hso driver is again relatively stable with this fix.

Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/usb/hso.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index e25a58f6ff6..6478bf63f28 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2053,8 +2053,10 @@ static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
 			serial->curr_rx_urb_offset;
 		D1("data to push to tty");
 		while (write_length_remaining) {
-			if (test_bit(TTY_THROTTLED, &tty->flags))
+			if (test_bit(TTY_THROTTLED, &tty->flags)) {
+				tty_kref_put(tty);
 				return -1;
+			}
 			curr_write_len =  tty_insert_flip_string
 				(tty, urb->transfer_buffer +
 				 serial->curr_rx_urb_offset,
-- 
GitLab


From cbbc49877d44408c4d0decf77c3c141732bbc679 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Thu, 15 Jan 2009 19:12:51 +0000
Subject: [PATCH 432/492] CREDITS address update for dwmw2.

Update employer's care-of address in CREDITS file, and remove references
to some _very_ old stuff I'd forgotten I'd ever done.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 CREDITS | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

diff --git a/CREDITS b/CREDITS
index 939da46a87f..2b39168c06a 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3786,14 +3786,11 @@ S: The Netherlands
 
 N: David Woodhouse
 E: dwmw2@infradead.org
-D: ARCnet stuff, Applicom board driver, SO_BINDTODEVICE,
-D: some Alpha platform porting from 2.0, Memory Technology Devices,
-D: Acquire watchdog timer, PC speaker driver maintenance,
+D: JFFS2 file system, Memory Technology Device subsystem,
 D: various other stuff that annoyed me by not working.
-S: c/o Red Hat Engineering
-S: Rustat House
-S: 60 Clifton Road
-S: Cambridge. CB1 7EG
+S: c/o Intel Corporation
+S: Pipers Way
+S: Swindon. SN3 1RJ
 S: England
 
 N: Chris Wright
-- 
GitLab


From bb9a35f293a3c8b5d57253cdfe2f29fa2627e1b9 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 15 Jan 2009 22:27:46 +0100
Subject: [PATCH 433/492] hwmon: (k8temp) Warn about fam F rev F errata

Add warning about wrong CPU temperature readouts on all fam F rev F.

The allowed combinations of processors ensure that all processors
in a multisocket system have similar characteristics, e.g.

(1) provide temperature sensor interface (>=RevC && <RevF)
(2) are affected by erratum #141 (>=RevF)

Thus it is sufficient to check the revision of the boot CPU.

For "mixed silicon support" refer to
"Revision Guide for AMD Athlon 64 and AMD Opteron Processors" (RevA-E) and
"Revision Guide for AMD NPT Family 0Fh Processors" (RefF-G).

Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/k8temp.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index bd2bde0ef95..ca56f2e26fd 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -31,6 +31,7 @@
 #include <linux/hwmon-sysfs.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
+#include <asm/processor.h>
 
 #define TEMP_FROM_REG(val)	(((((val) >> 16) & 0xff) - 49) * 1000)
 #define REG_TEMP	0xe4
@@ -141,20 +142,34 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
 	int err;
 	u8 scfg;
 	u32 temp;
+	u8 model, stepping;
 	struct k8temp_data *data;
-	u32 cpuid = cpuid_eax(1);
-
-	/* this feature should be available since SH-C0 core */
-	if ((cpuid == 0xf40) || (cpuid == 0xf50) || (cpuid == 0xf51)) {
-		err = -ENODEV;
-		goto exit;
-	}
 
 	if (!(data = kzalloc(sizeof(struct k8temp_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
 	}
 
+	model = boot_cpu_data.x86_model;
+	stepping = boot_cpu_data.x86_mask;
+
+	switch (boot_cpu_data.x86) {
+	case 0xf:
+		/* feature available since SH-C0, exclude older revisions */
+		if (((model == 4) && (stepping == 0)) ||
+		    ((model == 5) && (stepping <= 1))) {
+			err = -ENODEV;
+			goto exit_free;
+		}
+
+		if (model >= 0x40) {
+			dev_warn(&pdev->dev, "Temperature readouts might be "
+				 "wrong - check erratum #141\n");
+		}
+
+		break;
+	}
+
 	pci_read_config_byte(pdev, REG_TEMP, &scfg);
 	scfg &= ~(SEL_PLACE | SEL_CORE);		/* Select sensor 0, core0 */
 	pci_write_config_byte(pdev, REG_TEMP, scfg);
-- 
GitLab


From a2e066bba2aad6583e3ff648bf28339d6c9f0898 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 15 Jan 2009 22:27:47 +0100
Subject: [PATCH 434/492] hwmon: (k8temp) Fix wrong sensor selection for AMD K8
 RevF/RevG CPUs

Meaning of ThermSenseCoreSel bit was inverted beginning with K8 RevF.
That means with current driver temp1/temp2 belong to core 1 and
temp3/temp4 belong to core 0 on a K8 RevF/RevG CPU.

This patch ensures that temp1/temp2 always belong to core 0 and
temp3/temp4 to core 1 for all K8 revisions.

Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/k8temp.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index ca56f2e26fd..a6381bc9189 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -48,6 +48,7 @@ struct k8temp_data {
 	/* registers values */
 	u8 sensorsp;		/* sensor presence bits - SEL_CORE & SEL_PLACE */
 	u32 temp[2][2];		/* core, place */
+	u8 swap_core_select;    /* meaning of SEL_CORE is inverted */
 };
 
 static struct k8temp_data *k8temp_update_device(struct device *dev)
@@ -117,6 +118,9 @@ static ssize_t show_temp(struct device *dev,
 	int place = attr->index;
 	struct k8temp_data *data = k8temp_update_device(dev);
 
+	if (data->swap_core_select)
+		core = core ? 0 : 1;
+
 	return sprintf(buf, "%d\n",
 		       TEMP_FROM_REG(data->temp[core][place]));
 }
@@ -162,7 +166,12 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
 			goto exit_free;
 		}
 
+		/*
+		 * AMD NPT family 0fh, i.e. RevF and RevG:
+		 * meaning of SEL_CORE bit is inverted
+		 */
 		if (model >= 0x40) {
+			data->swap_core_select = 1;
 			dev_warn(&pdev->dev, "Temperature readouts might be "
 				 "wrong - check erratum #141\n");
 		}
-- 
GitLab


From 76ff08da34196cfa308fcd3552bb9ea20888e745 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Thu, 15 Jan 2009 22:27:47 +0100
Subject: [PATCH 435/492] hwmon: (k8temp) Fix temperature reporting for (most)
 K8 RevG CPUs

Current Temperature for K8 RevG desktop CPUs is a "normalized value"
which can be below ambient temperature.

As a consequence lots of RevG systems report temperatures like:

$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:    +17 C
Core0 Temp:     +3 C
Core1 Temp:    +21 C
Core1 Temp:     +5 C

being quite below ambient temperature.
There are even reports of negative temperature values.

This patch corrects the temperature reporting of k8temp for
RevG desktop CPUs.

Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/k8temp.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index a6381bc9189..1fe99511184 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -49,6 +49,7 @@ struct k8temp_data {
 	u8 sensorsp;		/* sensor presence bits - SEL_CORE & SEL_PLACE */
 	u32 temp[2][2];		/* core, place */
 	u8 swap_core_select;    /* meaning of SEL_CORE is inverted */
+	u32 temp_offset;
 };
 
 static struct k8temp_data *k8temp_update_device(struct device *dev)
@@ -116,13 +117,15 @@ static ssize_t show_temp(struct device *dev,
 	    to_sensor_dev_attr_2(devattr);
 	int core = attr->nr;
 	int place = attr->index;
+	int temp;
 	struct k8temp_data *data = k8temp_update_device(dev);
 
 	if (data->swap_core_select)
 		core = core ? 0 : 1;
 
-	return sprintf(buf, "%d\n",
-		       TEMP_FROM_REG(data->temp[core][place]));
+	temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
+
+	return sprintf(buf, "%d\n", temp);
 }
 
 /* core, place */
@@ -176,6 +179,16 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
 				 "wrong - check erratum #141\n");
 		}
 
+		if ((model >= 0x69) &&
+		    !(model == 0xc1 || model == 0x6c || model == 0x7c)) {
+			/*
+			 * RevG desktop CPUs (i.e. no socket S1G1 parts)
+			 * need additional offset, otherwise reported
+			 * temperature is below ambient temperature
+			 */
+			data->temp_offset = 21000;
+		}
+
 		break;
 	}
 
-- 
GitLab


From 1c301fc5394f7e1aa4c201e6e03d55d9c08b3bdf Mon Sep 17 00:00:00 2001
From: Jordan Crouse <jordan.crouse@amd.com>
Date: Thu, 15 Jan 2009 22:27:47 +0100
Subject: [PATCH 436/492] hwmon: Add a driver for the ADT7475 hardware
 monitoring chip

Hwmon driver for the ADT7475 chip.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 Documentation/hwmon/adt7475 |   87 +++
 drivers/hwmon/Kconfig       |   10 +
 drivers/hwmon/Makefile      |    2 +
 drivers/hwmon/adt7475.c     | 1221 +++++++++++++++++++++++++++++++++++
 4 files changed, 1320 insertions(+)
 create mode 100644 Documentation/hwmon/adt7475
 create mode 100644 drivers/hwmon/adt7475.c

diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
new file mode 100644
index 00000000000..a2b1abec850
--- /dev/null
+++ b/Documentation/hwmon/adt7475
@@ -0,0 +1,87 @@
+This describes the interface for the ADT7475 driver:
+
+(there are 4 fans, numbered fan1 to fan4):
+
+fanX_input		Read the current speed of the fan (in RPMs)
+fanX_min		Read/write the minimum speed of the fan.  Dropping
+			below this sets an alarm.
+
+(there are three PWMs, numbered pwm1 to pwm3):
+
+pwmX			Read/write the current duty cycle of the PWM.  Writes
+			only have effect when auto mode is turned off (see
+			below).  Range is 0 - 255.
+
+pwmX_enable		Fan speed control method:
+
+			0 - No control (fan at full speed)
+			1 - Manual fan speed control (using pwm[1-*])
+			2 - Automatic fan speed control
+
+pwmX_auto_channels_temp	Select which channels affect this PWM
+
+			1 - TEMP1 controls PWM
+			2 - TEMP2 controls PWM
+			4 - TEMP3 controls PWM
+			6 - TEMP2 and TEMP3 control PWM
+			7 - All three inputs control PWM
+
+pwmX_freq		Read/write the PWM frequency in Hz. The number
+			should be one of the following:
+
+			11 Hz
+			14 Hz
+			22 Hz
+			29 Hz
+			35 Hz
+			44 Hz
+			58 Hz
+			88 Hz
+
+pwmX_auto_point1_pwm	Read/write the minimum PWM duty cycle in automatic mode
+
+pwmX_auto_point2_pwm	Read/write the maximum PWM duty cycle in automatic mode
+
+(there are three temperature settings numbered temp1 to temp3):
+
+tempX_input		Read the current temperature.  The value is in milli
+			degrees of Celsius.
+
+tempX_max		Read/write the upper temperature limit - exceeding this
+			will cause an alarm.
+
+tempX_min		Read/write the lower temperature limit - exceeding this
+			will cause an alarm.
+
+tempX_offset		Read/write the temperature adjustment offset
+
+tempX_crit		Read/write the THERM limit for remote1.
+
+tempX_crit_hyst		Set the temperature value below crit where the
+			fans will stay on - this helps drive the temperature
+			low enough so it doesn't stay near the edge and
+			cause THERM to keep tripping.
+
+tempX_auto_point1_temp	Read/write the minimum temperature where the fans will
+			turn on in automatic mode.
+
+tempX_auto_point2_temp	Read/write the maximum temperature over which the fans
+			will run in automatic mode.  tempX_auto_point1_temp
+			and tempX_auto_point2_temp together define the
+			range of automatic control.
+
+tempX_alarm		Read a 1 if the max/min alarm is set
+tempX_fault		Read a 1 if either temp1 or temp3 diode has a fault
+
+(There are two voltage settings, in1 and in2):
+
+inX_input		Read the current voltage on VCC.  Value is in
+			millivolts.
+
+inX_min			read/write the minimum voltage limit.
+			Dropping below this causes an alarm.
+
+inX_max			read/write the maximum voltage limit.
+			Exceeding this causes an alarm.
+
+inX_alarm		Read a 1 if the max/min alarm is set.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4b33bc82cc2..5c349a19a3a 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -189,6 +189,16 @@ config SENSORS_ADT7473
 	  This driver can also be built as a module. If so, the module
 	  will be called adt7473.
 
+config SENSORS_ADT7475
+	tristate "Analog Devices ADT7475"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Analog Devices
+	  ADT7475 hardware monitoring chips.
+
+	  This driver can also be build as a module.  If so, the module
+	  will be called adt7475.
+
 config SENSORS_K8TEMP
 	tristate "AMD Athlon64/FX or Opteron temperature sensor"
 	depends on X86 && PCI && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 19cb1ace3eb..2e80f37f39e 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -28,6 +28,8 @@ obj-$(CONFIG_SENSORS_ADS7828)	+= ads7828.o
 obj-$(CONFIG_SENSORS_ADT7462)	+= adt7462.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
 obj-$(CONFIG_SENSORS_ADT7473)	+= adt7473.o
+obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
+
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_AMS)	+= ams/
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
new file mode 100644
index 00000000000..d39877a7da6
--- /dev/null
+++ b/drivers/hwmon/adt7475.c
@@ -0,0 +1,1221 @@
+/*
+ * adt7475 - Thermal sensor driver for the ADT7475 chip and derivatives
+ * Copyright (C) 2007-2008, Advanced Micro Devices, Inc.
+ * Copyright (C) 2008 Jordan Crouse <jordan@cosmicpenguin.net>
+ * Copyright (C) 2008 Hans de Goede <hdegoede@redhat.com>
+
+ * Derived from the lm83 driver by Jean Delvare
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+
+/* Indexes for the sysfs hooks */
+
+#define INPUT		0
+#define MIN		1
+#define MAX		2
+#define CONTROL		3
+#define OFFSET		3
+#define AUTOMIN		4
+#define THERM		5
+#define HYSTERSIS	6
+
+/* These are unique identifiers for the sysfs functions - unlike the
+   numbers above, these are not also indexes into an array
+*/
+
+#define ALARM		9
+#define FAULT		10
+
+/* 7475 Common Registers */
+
+#define REG_VOLTAGE_BASE	0x21
+#define REG_TEMP_BASE		0x25
+#define REG_TACH_BASE		0x28
+#define REG_PWM_BASE		0x30
+#define REG_PWM_MAX_BASE	0x38
+
+#define REG_DEVID		0x3D
+#define REG_VENDID		0x3E
+
+#define REG_STATUS1		0x41
+#define REG_STATUS2		0x42
+
+#define REG_VOLTAGE_MIN_BASE	0x46
+#define REG_VOLTAGE_MAX_BASE	0x47
+
+#define REG_TEMP_MIN_BASE	0x4E
+#define REG_TEMP_MAX_BASE	0x4F
+
+#define REG_TACH_MIN_BASE	0x54
+
+#define REG_PWM_CONFIG_BASE	0x5C
+
+#define REG_TEMP_TRANGE_BASE	0x5F
+
+#define REG_PWM_MIN_BASE	0x64
+
+#define REG_TEMP_TMIN_BASE	0x67
+#define REG_TEMP_THERM_BASE	0x6A
+
+#define REG_REMOTE1_HYSTERSIS	0x6D
+#define REG_REMOTE2_HYSTERSIS	0x6E
+
+#define REG_TEMP_OFFSET_BASE	0x70
+
+#define REG_EXTEND1		0x76
+#define REG_EXTEND2		0x77
+#define REG_CONFIG5		0x7C
+
+#define CONFIG5_TWOSCOMP	0x01
+#define CONFIG5_TEMPOFFSET	0x02
+
+/* ADT7475 Settings */
+
+#define ADT7475_VOLTAGE_COUNT	2
+#define ADT7475_TEMP_COUNT	3
+#define ADT7475_TACH_COUNT	4
+#define ADT7475_PWM_COUNT	3
+
+/* Macro to read the registers */
+
+#define adt7475_read(reg) i2c_smbus_read_byte_data(client, (reg))
+
+/* Macros to easily index the registers */
+
+#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2))
+#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2))
+
+#define PWM_REG(idx) (REG_PWM_BASE + (idx))
+#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx))
+#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx))
+#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx))
+
+#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx))
+#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2))
+#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2))
+
+#define TEMP_REG(idx) (REG_TEMP_BASE + (idx))
+#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2))
+#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2))
+#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx))
+#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx))
+#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
+#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))
+
+static unsigned short normal_i2c[] = { 0x2e, I2C_CLIENT_END };
+
+I2C_CLIENT_INSMOD_1(adt7475);
+
+static const struct i2c_device_id adt7475_id[] = {
+	{ "adt7475", adt7475 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adt7475_id);
+
+struct adt7475_data {
+	struct device *hwmon_dev;
+	struct mutex lock;
+
+	unsigned long measure_updated;
+	unsigned long limits_updated;
+	char valid;
+
+	u8 config5;
+	u16 alarms;
+	u16 voltage[3][3];
+	u16 temp[7][3];
+	u16 tach[2][4];
+	u8 pwm[4][3];
+	u8 range[3];
+	u8 pwmctl[3];
+	u8 pwmchan[3];
+};
+
+static struct i2c_driver adt7475_driver;
+static struct adt7475_data *adt7475_update_device(struct device *dev);
+static void adt7475_read_hystersis(struct i2c_client *client);
+static void adt7475_read_pwm(struct i2c_client *client, int index);
+
+/* Given a temp value, convert it to register value */
+
+static inline u16 temp2reg(struct adt7475_data *data, long val)
+{
+	u16 ret;
+
+	if (!(data->config5 & CONFIG5_TWOSCOMP)) {
+		val = SENSORS_LIMIT(val, -64000, 191000);
+		ret = (val + 64500) / 1000;
+	} else {
+		val = SENSORS_LIMIT(val, -128000, 127000);
+		if (val < -500)
+			ret = (256500 + val) / 1000;
+		else
+			ret = (val + 500) / 1000;
+	}
+
+	return ret << 2;
+}
+
+/* Given a register value, convert it to a real temp value */
+
+static inline int reg2temp(struct adt7475_data *data, u16 reg)
+{
+	if (data->config5 & CONFIG5_TWOSCOMP) {
+		if (reg >= 512)
+			return (reg - 1024) * 250;
+		else
+			return reg * 250;
+	} else
+		return (reg - 256) * 250;
+}
+
+static inline int tach2rpm(u16 tach)
+{
+	if (tach == 0 || tach == 0xFFFF)
+		return 0;
+
+	return (90000 * 60) / tach;
+}
+
+static inline u16 rpm2tach(unsigned long rpm)
+{
+	if (rpm == 0)
+		return 0;
+
+	return SENSORS_LIMIT((90000 * 60) / rpm, 1, 0xFFFF);
+}
+
+static inline int reg2vcc(u16 reg)
+{
+	return (4296 * reg) / 1000;
+}
+
+static inline int reg2vccp(u16 reg)
+{
+	return (2929 * reg) / 1000;
+}
+
+static inline u16 vcc2reg(long vcc)
+{
+	vcc = SENSORS_LIMIT(vcc, 0, 4396);
+	return (vcc * 1000) / 4296;
+}
+
+static inline u16 vccp2reg(long vcc)
+{
+	vcc = SENSORS_LIMIT(vcc, 0, 2998);
+	return (vcc * 1000) / 2929;
+}
+
+static u16 adt7475_read_word(struct i2c_client *client, int reg)
+{
+	u16 val;
+
+	val = i2c_smbus_read_byte_data(client, reg);
+	val |= (i2c_smbus_read_byte_data(client, reg + 1) << 8);
+
+	return val;
+}
+
+static void adt7475_write_word(struct i2c_client *client, int reg, u16 val)
+{
+	i2c_smbus_write_byte_data(client, reg + 1, val >> 8);
+	i2c_smbus_write_byte_data(client, reg, val & 0xFF);
+}
+
+/* Find the nearest value in a table - used for pwm frequency and
+   auto temp range */
+static int find_nearest(long val, const int *array, int size)
+{
+	int i;
+
+	if (val < array[0])
+		return 0;
+
+	if (val > array[size - 1])
+		return size - 1;
+
+	for (i = 0; i < size - 1; i++) {
+		int a, b;
+
+		if (val > array[i + 1])
+			continue;
+
+		a = val - array[i];
+		b = array[i + 1] - val;
+
+		return (a <= b) ? i : i + 1;
+	}
+
+	return 0;
+}
+
+static ssize_t show_voltage(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	unsigned short val;
+
+	switch (sattr->nr) {
+	case ALARM:
+		return sprintf(buf, "%d\n",
+			       (data->alarms >> (sattr->index + 1)) & 1);
+	default:
+		val = data->voltage[sattr->nr][sattr->index];
+		return sprintf(buf, "%d\n",
+			       sattr->index ==
+			       0 ? reg2vccp(val) : reg2vcc(val));
+	}
+}
+
+static ssize_t set_voltage(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned char reg;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	data->voltage[sattr->nr][sattr->index] =
+		sattr->index ? vcc2reg(val) : vccp2reg(val);
+
+	if (sattr->nr == MIN)
+		reg = VOLTAGE_MIN_REG(sattr->index);
+	else
+		reg = VOLTAGE_MAX_REG(sattr->index);
+
+	i2c_smbus_write_byte_data(client, reg,
+				  data->voltage[sattr->nr][sattr->index] >> 2);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int out;
+
+	switch (sattr->nr) {
+	case HYSTERSIS:
+		mutex_lock(&data->lock);
+		out = data->temp[sattr->nr][sattr->index];
+		if (sattr->index != 1)
+			out = (out >> 4) & 0xF;
+		else
+			out = (out & 0xF);
+		/* Show the value as an absolute number tied to
+		 * THERM */
+		out = reg2temp(data, data->temp[THERM][sattr->index]) -
+			out * 1000;
+		mutex_unlock(&data->lock);
+		break;
+
+	case OFFSET:
+		/* Offset is always 2's complement, regardless of the
+		 * setting in CONFIG5 */
+		mutex_lock(&data->lock);
+		out = (s8)data->temp[sattr->nr][sattr->index];
+		if (data->config5 & CONFIG5_TEMPOFFSET)
+			out *= 1000;
+		else
+			out *= 500;
+		mutex_unlock(&data->lock);
+		break;
+
+	case ALARM:
+		out = (data->alarms >> (sattr->index + 4)) & 1;
+		break;
+
+	case FAULT:
+		/* Note - only for remote1 and remote2 */
+		out = data->alarms & (sattr->index ? 0x8000 : 0x4000);
+		out = out ? 0 : 1;
+		break;
+
+	default:
+		/* All other temp values are in the configured format */
+		out = reg2temp(data, data->temp[sattr->nr][sattr->index]);
+	}
+
+	return sprintf(buf, "%d\n", out);
+}
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned char reg = 0;
+	u8 out;
+	int temp;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	/* We need the config register in all cases for temp <-> reg conv. */
+	data->config5 = adt7475_read(REG_CONFIG5);
+
+	switch (sattr->nr) {
+	case OFFSET:
+		if (data->config5 & CONFIG5_TEMPOFFSET) {
+			val = SENSORS_LIMIT(val, -63000, 127000);
+			out = data->temp[OFFSET][sattr->index] = val / 1000;
+		} else {
+			val = SENSORS_LIMIT(val, -63000, 64000);
+			out = data->temp[OFFSET][sattr->index] = val / 500;
+		}
+		break;
+
+	case HYSTERSIS:
+		/* The value will be given as an absolute value, turn it
+		   into an offset based on THERM */
+
+		/* Read fresh THERM and HYSTERSIS values from the chip */
+		data->temp[THERM][sattr->index] =
+			adt7475_read(TEMP_THERM_REG(sattr->index)) << 2;
+		adt7475_read_hystersis(client);
+
+		temp = reg2temp(data, data->temp[THERM][sattr->index]);
+		val = SENSORS_LIMIT(val, temp - 15000, temp);
+		val = (temp - val) / 1000;
+
+		if (sattr->index != 1) {
+			data->temp[HYSTERSIS][sattr->index] &= 0xF0;
+			data->temp[HYSTERSIS][sattr->index] |= (val & 0xF) << 4;
+		} else {
+			data->temp[HYSTERSIS][sattr->index] &= 0x0F;
+			data->temp[HYSTERSIS][sattr->index] |= (val & 0xF);
+		}
+
+		out = data->temp[HYSTERSIS][sattr->index];
+		break;
+
+	default:
+		data->temp[sattr->nr][sattr->index] = temp2reg(data, val);
+
+		/* We maintain an extra 2 digits of precision for simplicity
+		 * - shift those back off before writing the value */
+		out = (u8) (data->temp[sattr->nr][sattr->index] >> 2);
+	}
+
+	switch (sattr->nr) {
+	case MIN:
+		reg = TEMP_MIN_REG(sattr->index);
+		break;
+	case MAX:
+		reg = TEMP_MAX_REG(sattr->index);
+		break;
+	case OFFSET:
+		reg = TEMP_OFFSET_REG(sattr->index);
+		break;
+	case AUTOMIN:
+		reg = TEMP_TMIN_REG(sattr->index);
+		break;
+	case THERM:
+		reg = TEMP_THERM_REG(sattr->index);
+		break;
+	case HYSTERSIS:
+		if (sattr->index != 2)
+			reg = REG_REMOTE1_HYSTERSIS;
+		else
+			reg = REG_REMOTE2_HYSTERSIS;
+
+		break;
+	}
+
+	i2c_smbus_write_byte_data(client, reg, out);
+
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+/* Table of autorange values - the user will write the value in millidegrees,
+   and we'll convert it */
+static const int autorange_table[] = {
+	2000, 2500, 3330, 4000, 5000, 6670, 8000,
+	10000, 13330, 16000, 20000, 26670, 32000, 40000,
+	53330, 80000
+};
+
+static ssize_t show_point2(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int out, val;
+
+	mutex_lock(&data->lock);
+	out = (data->range[sattr->index] >> 4) & 0x0F;
+	val = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
+	mutex_unlock(&data->lock);
+
+	return sprintf(buf, "%d\n", val + autorange_table[out]);
+}
+
+static ssize_t set_point2(struct device *dev, struct device_attribute *attr,
+			  const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int temp;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	/* Get a fresh copy of the needed registers */
+	data->config5 = adt7475_read(REG_CONFIG5);
+	data->temp[AUTOMIN][sattr->index] =
+		adt7475_read(TEMP_TMIN_REG(sattr->index)) << 2;
+	data->range[sattr->index] =
+		adt7475_read(TEMP_TRANGE_REG(sattr->index));
+
+	/* The user will write an absolute value, so subtract the start point
+	   to figure the range */
+	temp = reg2temp(data, data->temp[AUTOMIN][sattr->index]);
+	val = SENSORS_LIMIT(val, temp + autorange_table[0],
+		temp + autorange_table[ARRAY_SIZE(autorange_table) - 1]);
+	val -= temp;
+
+	/* Find the nearest table entry to what the user wrote */
+	val = find_nearest(val, autorange_table, ARRAY_SIZE(autorange_table));
+
+	data->range[sattr->index] &= ~0xF0;
+	data->range[sattr->index] |= val << 4;
+
+	i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
+				  data->range[sattr->index]);
+
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static ssize_t show_tach(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	int out;
+
+	if (sattr->nr == ALARM)
+		out = (data->alarms >> (sattr->index + 10)) & 1;
+	else
+		out = tach2rpm(data->tach[sattr->nr][sattr->index]);
+
+	return sprintf(buf, "%d\n", out);
+}
+
+static ssize_t set_tach(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned long val;
+
+	if (strict_strtoul(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	data->tach[MIN][sattr->index] = rpm2tach(val);
+
+	adt7475_write_word(client, TACH_MIN_REG(sattr->index),
+			   data->tach[MIN][sattr->index]);
+
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+	return sprintf(buf, "%d\n", data->pwm[sattr->nr][sattr->index]);
+}
+
+static ssize_t show_pwmchan(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+	return sprintf(buf, "%d\n", data->pwmchan[sattr->index]);
+}
+
+static ssize_t show_pwmctrl(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+	return sprintf(buf, "%d\n", data->pwmctl[sattr->index]);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned char reg = 0;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	switch (sattr->nr) {
+	case INPUT:
+		/* Get a fresh value for CONTROL */
+		data->pwm[CONTROL][sattr->index] =
+			adt7475_read(PWM_CONFIG_REG(sattr->index));
+
+		/* If we are not in manual mode, then we shouldn't allow
+		 * the user to set the pwm speed */
+		if (((data->pwm[CONTROL][sattr->index] >> 5) & 7) != 7) {
+			mutex_unlock(&data->lock);
+			return count;
+		}
+
+		reg = PWM_REG(sattr->index);
+		break;
+
+	case MIN:
+		reg = PWM_MIN_REG(sattr->index);
+		break;
+
+	case MAX:
+		reg = PWM_MAX_REG(sattr->index);
+		break;
+	}
+
+	data->pwm[sattr->nr][sattr->index] = SENSORS_LIMIT(val, 0, 0xFF);
+	i2c_smbus_write_byte_data(client, reg,
+				  data->pwm[sattr->nr][sattr->index]);
+
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+/* Called by set_pwmctrl and set_pwmchan */
+
+static int hw_set_pwm(struct i2c_client *client, int index,
+		      unsigned int pwmctl, unsigned int pwmchan)
+{
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	long val = 0;
+
+	switch (pwmctl) {
+	case 0:
+		val = 0x03;	/* Run at full speed */
+		break;
+	case 1:
+		val = 0x07;	/* Manual mode */
+		break;
+	case 2:
+		switch (pwmchan) {
+		case 1:
+			/* Remote1 controls PWM */
+			val = 0x00;
+			break;
+		case 2:
+			/* local controls PWM */
+			val = 0x01;
+			break;
+		case 4:
+			/* remote2 controls PWM */
+			val = 0x02;
+			break;
+		case 6:
+			/* local/remote2 control PWM */
+			val = 0x05;
+			break;
+		case 7:
+			/* All three control PWM */
+			val = 0x06;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	data->pwmctl[index] = pwmctl;
+	data->pwmchan[index] = pwmchan;
+
+	data->pwm[CONTROL][index] &= ~0xE0;
+	data->pwm[CONTROL][index] |= (val & 7) << 5;
+
+	i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+				  data->pwm[CONTROL][index]);
+
+	return 0;
+}
+
+static ssize_t set_pwmchan(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	int r;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+	/* Read Modify Write PWM values */
+	adt7475_read_pwm(client, sattr->index);
+	r = hw_set_pwm(client, sattr->index, data->pwmctl[sattr->index], val);
+	if (r)
+		count = r;
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t set_pwmctrl(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	int r;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+	/* Read Modify Write PWM values */
+	adt7475_read_pwm(client, sattr->index);
+	r = hw_set_pwm(client, sattr->index, val, data->pwmchan[sattr->index]);
+	if (r)
+		count = r;
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+/* List of frequencies for the PWM */
+static const int pwmfreq_table[] = {
+	11, 14, 22, 29, 35, 44, 58, 88
+};
+
+static ssize_t show_pwmfreq(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct adt7475_data *data = adt7475_update_device(dev);
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+
+	return sprintf(buf, "%d\n",
+		       pwmfreq_table[data->range[sattr->index] & 7]);
+}
+
+static ssize_t set_pwmfreq(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	int out;
+	long val;
+
+	if (strict_strtol(buf, 10, &val))
+		return -EINVAL;
+
+	out = find_nearest(val, pwmfreq_table, ARRAY_SIZE(pwmfreq_table));
+
+	mutex_lock(&data->lock);
+
+	data->range[sattr->index] =
+		adt7475_read(TEMP_TRANGE_REG(sattr->index));
+	data->range[sattr->index] &= ~7;
+	data->range[sattr->index] |= out;
+
+	i2c_smbus_write_byte_data(client, TEMP_TRANGE_REG(sattr->index),
+				  data->range[sattr->index]);
+
+	mutex_unlock(&data->lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_voltage, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(in1_max, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(in1_min, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MIN, 0);
+static SENSOR_DEVICE_ATTR_2(in1_alarm, S_IRUGO, show_voltage, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_voltage, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_voltage,
+			    set_voltage, MIN, 1);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_voltage, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_alarm, S_IRUGO, show_temp, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_temp, NULL, FAULT, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MAX, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MIN, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_offset, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, OFFSET, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_temp, set_temp, AUTOMIN, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_point2, set_point2, 0, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    THERM, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, HYSTERSIS, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MAX, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MIN, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_offset, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, OFFSET, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_temp, set_temp, AUTOMIN, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_point2, set_point2, 0, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    THERM, 1);
+static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, HYSTERSIS, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MAX, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    MIN, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_offset, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, OFFSET, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_point1_temp, S_IRUGO | S_IWUSR,
+			    show_temp, set_temp, AUTOMIN, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_auto_point2_temp, S_IRUGO | S_IWUSR,
+			    show_point2, set_point2, 0, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
+			    THERM, 2);
+static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
+			    set_temp, HYSTERSIS, 2);
+static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+			    MIN, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, show_tach, NULL, ALARM, 0);
+static SENSOR_DEVICE_ATTR_2(fan2_input, S_IRUGO, show_tach, NULL, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+			    MIN, 1);
+static SENSOR_DEVICE_ATTR_2(fan2_alarm, S_IRUGO, show_tach, NULL, ALARM, 1);
+static SENSOR_DEVICE_ATTR_2(fan3_input, S_IRUGO, show_tach, NULL, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+			    MIN, 2);
+static SENSOR_DEVICE_ATTR_2(fan3_alarm, S_IRUGO, show_tach, NULL, ALARM, 2);
+static SENSOR_DEVICE_ATTR_2(fan4_input, S_IRUGO, show_tach, NULL, INPUT, 3);
+static SENSOR_DEVICE_ATTR_2(fan4_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
+			    MIN, 3);
+static SENSOR_DEVICE_ATTR_2(fan4_alarm, S_IRUGO, show_tach, NULL, ALARM, 3);
+static SENSOR_DEVICE_ATTR_2(pwm1, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+			    0);
+static SENSOR_DEVICE_ATTR_2(pwm1_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+			    set_pwmfreq, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+			    set_pwmctrl, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_channel_temp, S_IRUGO | S_IWUSR,
+			    show_pwmchan, set_pwmchan, INPUT, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MIN, 0);
+static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MAX, 0);
+static SENSOR_DEVICE_ATTR_2(pwm2, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+			    1);
+static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+			    set_pwmfreq, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+			    set_pwmctrl, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_channel_temp, S_IRUGO | S_IWUSR,
+			    show_pwmchan, set_pwmchan, INPUT, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MIN, 1);
+static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MAX, 1);
+static SENSOR_DEVICE_ATTR_2(pwm3, S_IRUGO | S_IWUSR, show_pwm, set_pwm, INPUT,
+			    2);
+static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq,
+			    set_pwmfreq, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl,
+			    set_pwmctrl, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_channel_temp, S_IRUGO | S_IWUSR,
+			    show_pwmchan, set_pwmchan, INPUT, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MIN, 2);
+static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_pwm, S_IRUGO | S_IWUSR, show_pwm,
+			    set_pwm, MAX, 2);
+
+static struct attribute *adt7475_attrs[] = {
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_fault.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_offset.dev_attr.attr,
+	&sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_offset.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit.dev_attr.attr,
+	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_fault.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_offset.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit.dev_attr.attr,
+	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channel_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channel_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channel_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+	NULL,
+};
+
+struct attribute_group adt7475_attr_group = { .attrs = adt7475_attrs };
+
+static int adt7475_detect(struct i2c_client *client, int kind,
+			  struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	if (kind <= 0) {
+		if (adt7475_read(REG_VENDID) != 0x41 ||
+		    adt7475_read(REG_DEVID) != 0x75) {
+			dev_err(&adapter->dev,
+				"Couldn't detect a adt7475 part at 0x%02x\n",
+				(unsigned int)client->addr);
+			return -ENODEV;
+		}
+	}
+
+	strlcpy(info->type, adt7475_id[0].name, I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static int adt7475_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct adt7475_data *data;
+	int i, ret = 0;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	mutex_init(&data->lock);
+	i2c_set_clientdata(client, data);
+
+	/* Call adt7475_read_pwm for all pwm's as this will reprogram any
+	   pwm's which are disabled to manual mode with 0% duty cycle */
+	for (i = 0; i < ADT7475_PWM_COUNT; i++)
+		adt7475_read_pwm(client, i);
+
+	ret = sysfs_create_group(&client->dev.kobj, &adt7475_attr_group);
+	if (ret)
+		goto efree;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		ret = PTR_ERR(data->hwmon_dev);
+		goto eremove;
+	}
+
+	return 0;
+
+eremove:
+	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+efree:
+	kfree(data);
+	return ret;
+}
+
+static int adt7475_remove(struct i2c_client *client)
+{
+	struct adt7475_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &adt7475_attr_group);
+	kfree(data);
+
+	return 0;
+}
+
+static struct i2c_driver adt7475_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "adt7475",
+	},
+	.probe		= adt7475_probe,
+	.remove		= adt7475_remove,
+	.id_table	= adt7475_id,
+	.detect		= adt7475_detect,
+	.address_data	= &addr_data,
+};
+
+static void adt7475_read_hystersis(struct i2c_client *client)
+{
+	struct adt7475_data *data = i2c_get_clientdata(client);
+
+	data->temp[HYSTERSIS][0] = (u16) adt7475_read(REG_REMOTE1_HYSTERSIS);
+	data->temp[HYSTERSIS][1] = data->temp[HYSTERSIS][0];
+	data->temp[HYSTERSIS][2] = (u16) adt7475_read(REG_REMOTE2_HYSTERSIS);
+}
+
+static void adt7475_read_pwm(struct i2c_client *client, int index)
+{
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	unsigned int v;
+
+	data->pwm[CONTROL][index] = adt7475_read(PWM_CONFIG_REG(index));
+
+	/* Figure out the internal value for pwmctrl and pwmchan
+	   based on the current settings */
+	v = (data->pwm[CONTROL][index] >> 5) & 7;
+
+	if (v == 3)
+		data->pwmctl[index] = 0;
+	else if (v == 7)
+		data->pwmctl[index] = 1;
+	else if (v == 4) {
+		/* The fan is disabled - we don't want to
+		   support that, so change to manual mode and
+		   set the duty cycle to 0 instead
+		*/
+		data->pwm[INPUT][index] = 0;
+		data->pwm[CONTROL][index] &= ~0xE0;
+		data->pwm[CONTROL][index] |= (7 << 5);
+
+		i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+					  data->pwm[INPUT][index]);
+
+		i2c_smbus_write_byte_data(client, PWM_CONFIG_REG(index),
+					  data->pwm[CONTROL][index]);
+
+		data->pwmctl[index] = 1;
+	} else {
+		data->pwmctl[index] = 2;
+
+		switch (v) {
+		case 0:
+			data->pwmchan[index] = 1;
+			break;
+		case 1:
+			data->pwmchan[index] = 2;
+			break;
+		case 2:
+			data->pwmchan[index] = 4;
+			break;
+		case 5:
+			data->pwmchan[index] = 6;
+			break;
+		case 6:
+			data->pwmchan[index] = 7;
+			break;
+		}
+	}
+}
+
+static struct adt7475_data *adt7475_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7475_data *data = i2c_get_clientdata(client);
+	u8 ext;
+	int i;
+
+	mutex_lock(&data->lock);
+
+	/* Measurement values update every 2 seconds */
+	if (time_after(jiffies, data->measure_updated + HZ * 2) ||
+	    !data->valid) {
+		data->alarms = adt7475_read(REG_STATUS2) << 8;
+		data->alarms |= adt7475_read(REG_STATUS1);
+
+		ext = adt7475_read(REG_EXTEND1);
+		for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++)
+			data->voltage[INPUT][i] =
+				(adt7475_read(VOLTAGE_REG(i)) << 2) |
+				((ext >> ((i + 1) * 2)) & 3);
+
+		ext = adt7475_read(REG_EXTEND2);
+		for (i = 0; i < ADT7475_TEMP_COUNT; i++)
+			data->temp[INPUT][i] =
+				(adt7475_read(TEMP_REG(i)) << 2) |
+				((ext >> ((i + 1) * 2)) & 3);
+
+		for (i = 0; i < ADT7475_TACH_COUNT; i++)
+			data->tach[INPUT][i] =
+				adt7475_read_word(client, TACH_REG(i));
+
+		/* Updated by hw when in auto mode */
+		for (i = 0; i < ADT7475_PWM_COUNT; i++)
+			data->pwm[INPUT][i] = adt7475_read(PWM_REG(i));
+
+		data->measure_updated = jiffies;
+	}
+
+	/* Limits and settings, should never change update every 60 seconds */
+	if (time_after(jiffies, data->limits_updated + HZ * 2) ||
+	    !data->valid) {
+		data->config5 = adt7475_read(REG_CONFIG5);
+
+		for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) {
+			/* Adjust values so they match the input precision */
+			data->voltage[MIN][i] =
+				adt7475_read(VOLTAGE_MIN_REG(i)) << 2;
+			data->voltage[MAX][i] =
+				adt7475_read(VOLTAGE_MAX_REG(i)) << 2;
+		}
+
+		for (i = 0; i < ADT7475_TEMP_COUNT; i++) {
+			/* Adjust values so they match the input precision */
+			data->temp[MIN][i] =
+				adt7475_read(TEMP_MIN_REG(i)) << 2;
+			data->temp[MAX][i] =
+				adt7475_read(TEMP_MAX_REG(i)) << 2;
+			data->temp[AUTOMIN][i] =
+				adt7475_read(TEMP_TMIN_REG(i)) << 2;
+			data->temp[THERM][i] =
+				adt7475_read(TEMP_THERM_REG(i)) << 2;
+			data->temp[OFFSET][i] =
+				adt7475_read(TEMP_OFFSET_REG(i));
+		}
+		adt7475_read_hystersis(client);
+
+		for (i = 0; i < ADT7475_TACH_COUNT; i++)
+			data->tach[MIN][i] =
+				adt7475_read_word(client, TACH_MIN_REG(i));
+
+		for (i = 0; i < ADT7475_PWM_COUNT; i++) {
+			data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i));
+			data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i));
+			/* Set the channel and control information */
+			adt7475_read_pwm(client, i);
+		}
+
+		data->range[0] = adt7475_read(TEMP_TRANGE_REG(0));
+		data->range[1] = adt7475_read(TEMP_TRANGE_REG(1));
+		data->range[2] = adt7475_read(TEMP_TRANGE_REG(2));
+
+		data->limits_updated = jiffies;
+		data->valid = 1;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return data;
+}
+
+static int __init sensors_adt7475_init(void)
+{
+	return i2c_add_driver(&adt7475_driver);
+}
+
+static void __exit sensors_adt7475_exit(void)
+{
+	i2c_del_driver(&adt7475_driver);
+}
+
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("adt7475 driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_adt7475_init);
+module_exit(sensors_adt7475_exit);
-- 
GitLab


From 058943ddcb7cb307a0c406088c1e61f203d8b66f Mon Sep 17 00:00:00 2001
From: Alistair John Strachan <alistair@devzero.co.uk>
Date: Thu, 15 Jan 2009 22:27:47 +0100
Subject: [PATCH 437/492] hwmon: (abituguru3) Match partial DMI board name
 strings

The switch-over to using DMI board strings to identify abituguru3 compatible
mainboards works most of the time, but sometimes the vendor has substantially
modified the board string between BIOS revisions.

We have found that the vendor chipset identification string (provided in
brackets) changes frequently and is of no use to us. The rest of the board
string sometimes changes in subtle ways, e.g. whitespace or variations in
capitalization.

The new comparison code checks only a part of the supplied DMI board string,
trimming the bracketed content, whitespace, and ignoring case as necessary.

This fixes a bug where an IP35 Pro running an early BIOS would not be
detected without the force=1 module parameter, and also speculatively
fixes other similiar issues.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Reported-by: Nick Pasich <NewsLetters@nickandbarb.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/abituguru3.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 70bb854086d..4914b34e6bc 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -279,7 +279,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "OTES1 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0011, "AT8 32X(ATI RD580-ULI M1575)", {
+	{ 0x0011, "AT8 32X", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR",		 1, 0, 20, 1, 0 },
 		{ "DDR VTT",		 2, 0, 10, 1, 0 },
@@ -402,7 +402,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0016, "AW9D-MAX       (Intel i975-ICH7)", {
+	{ 0x0016, "AW9D-MAX", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -509,7 +509,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 FAN",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x001A, "IP35 Pro(Intel P35-ICH9R)", {
+	{ 0x001A, "IP35 Pro", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -1128,6 +1128,7 @@ static int __init abituguru3_dmi_detect(void)
 {
 	const char *board_vendor, *board_name;
 	int i, err = (force) ? 1 : -ENODEV;
+	size_t sublen;
 
 	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
 	if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))
@@ -1137,9 +1138,20 @@ static int __init abituguru3_dmi_detect(void)
 	if (!board_name)
 		return err;
 
+	/* At the moment, we don't care about the part of the vendor
+	 * DMI string contained in brackets. Truncate the string at
+	 * the first occurrence of a bracket. Trim any trailing space
+	 * from the substring.
+	 */
+	sublen = strcspn(board_name, "(");
+	while (sublen > 0 && board_name[sublen - 1] == ' ')
+		sublen--;
+
 	for (i = 0; abituguru3_motherboards[i].id; i++) {
 		const char *dmi_name = abituguru3_motherboards[i].dmi_name;
-		if (dmi_name && !strcmp(dmi_name, board_name))
+		if (!dmi_name || strlen(dmi_name) != sublen)
+			continue;
+		if (!strncasecmp(board_name, dmi_name, sublen))
 			break;
 	}
 
-- 
GitLab


From 3907a8def78a15cd91985c23a3e76b563f36929a Mon Sep 17 00:00:00 2001
From: Alistair John Strachan <alistair@devzero.co.uk>
Date: Thu, 15 Jan 2009 22:27:48 +0100
Subject: [PATCH 438/492] hwmon: (abituguru3) Enable DMI probing feature on IN9
 32X MAX

Switch the IN9 32X MAX over from port probing to the preferred DMI
probe method.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Paul Hartman <paul.hartman+gentoo@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/abituguru3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 4914b34e6bc..f948ed16e96 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -482,7 +482,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0019, NULL /* Unknown, need DMI string */, {
+	{ 0x0019, "IN9 32X MAX", {
 		{ "CPU Core",		 7, 0, 10, 1, 0 },
 		{ "DDR2",		13, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		14, 0, 10, 1, 0 },
-- 
GitLab


From 46a5f173fc88ffc22651162033696d8a9fbcdc5c Mon Sep 17 00:00:00 2001
From: Alistair John Strachan <alistair@devzero.co.uk>
Date: Thu, 15 Jan 2009 22:27:48 +0100
Subject: [PATCH 439/492] hwmon: (abituguru3) Fix CONFIG_DMI=n fallback to
 probe

When CONFIG_DMI is not enabled, dmi detection should flag that no board
could be detected (err=1) rather than another error condition (err<0).

This fixes the fallback to manual probing for all motherboards, even
those without DMI strings, when CONFIG_DMI=n.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/hwmon/abituguru3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index f948ed16e96..e52b38806d0 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -1165,7 +1165,7 @@ static int __init abituguru3_dmi_detect(void)
 
 static inline int abituguru3_dmi_detect(void)
 {
-	return -ENODEV;
+	return 1;
 }
 
 #endif /* CONFIG_DMI */
-- 
GitLab


From a58c891a53aca81c78f9cbe0572a301042470e96 Mon Sep 17 00:00:00 2001
From: Eric Dumazet <dada1@cosmosbay.com>
Date: Thu, 15 Jan 2009 15:29:35 -0800
Subject: [PATCH 440/492] b44: GFP_DMA skb should not escape from driver

b44 chip has some hardware limitations, that need GFP_DMA bounce
buffers in some situations.

In order to not deplete DMA zone, we should keep allocated GFP_DMA skb
only for driver use. At rx time, we copy such skb to newly allocated
skb, reusing existing copybreak infrastructure.

On machines with low amount of memory, all skb meet the hardware limitation,
so no copy is needed. We detect this situation using a new device flag, set
to one if one GFP_DMA skb was ever allocated by b44_alloc_rx_skb().

Previously allocated skb, even outside from DMA zone will then be recycled,
to have minimal impact on DMA zone use.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Tested-by: Ionut Leonte <ionut.leonte@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/b44.c | 4 +++-
 drivers/net/b44.h | 2 +-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index 5ae131c147f..c38512ebcea 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -679,6 +679,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
 			dev_kfree_skb_any(skb);
 			return -ENOMEM;
 		}
+		bp->force_copybreak = 1;
 	}
 
 	rh = (struct rx_header *) skb->data;
@@ -800,7 +801,7 @@ static int b44_rx(struct b44 *bp, int budget)
 		/* Omit CRC. */
 		len -= 4;
 
-		if (len > RX_COPY_THRESHOLD) {
+		if (!bp->force_copybreak && len > RX_COPY_THRESHOLD) {
 			int skb_size;
 			skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
 			if (skb_size < 0)
@@ -2152,6 +2153,7 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
 	bp = netdev_priv(dev);
 	bp->sdev = sdev;
 	bp->dev = dev;
+	bp->force_copybreak = 0;
 
 	bp->msg_enable = netif_msg_init(b44_debug, B44_DEF_MSG_ENABLE);
 
diff --git a/drivers/net/b44.h b/drivers/net/b44.h
index 7db0c84a795..e678498de6d 100644
--- a/drivers/net/b44.h
+++ b/drivers/net/b44.h
@@ -395,7 +395,7 @@ struct b44 {
 	u32			rx_pending;
 	u32			tx_pending;
 	u8			phy_addr;
-
+	u8			force_copybreak;
 	struct mii_if_info	mii_if;
 };
 
-- 
GitLab


From b5db0e38653bfada34a92f360b4111566ede3842 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 15 Jan 2009 15:32:12 -0800
Subject: [PATCH 441/492] Revert "x86 PAT: remove CPA WARN_ON for zero pte"

This reverts commit 58dab916dfb57328d50deb0aa9b3fc92efa248ff, which
makes my Nehalem come to a nasty crawling almost-halt.  It looks like it
turns off caching of regular kernel RAM, with the understandable
slowdown of a few orders of magnitude as a result.

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/mm/pageattr.c | 10 ++++------
 arch/x86/mm/pat.c      | 45 ++++++++++++------------------------------
 2 files changed, 17 insertions(+), 38 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 4cf30dee816..e89d24815f2 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -555,12 +555,10 @@ repeat:
 	if (!pte_val(old_pte)) {
 		if (!primary)
 			return 0;
-
-		/*
-		 *  Special error value returned, indicating that the mapping
-		 * did not exist at this address.
-		 */
-		return -EFAULT;
+		WARN(1, KERN_WARNING "CPA: called for zero pte. "
+		       "vaddr = %lx cpa->vaddr = %lx\n", address,
+		       *cpa->vaddr);
+		return -EINVAL;
 	}
 
 	if (level == PG_LEVEL_4K) {
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 160c42d3eb8..8b08fb95527 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -505,35 +505,6 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 }
 #endif /* CONFIG_STRICT_DEVMEM */
 
-/*
- * Change the memory type for the physial address range in kernel identity
- * mapping space if that range is a part of identity map.
- */
-static int kernel_map_sync_memtype(u64 base, unsigned long size,
-					unsigned long flags)
-{
-	unsigned long id_sz;
-	int ret;
-
-	if (!pat_enabled || base >= __pa(high_memory))
-		return 0;
-
-	id_sz = (__pa(high_memory) < base + size) ?
-						__pa(high_memory) - base :
-						size;
-
-	ret = ioremap_change_attr((unsigned long)__va(base), id_sz, flags);
-	/*
-	 * -EFAULT return means that the addr was not valid and did not have
-	 * any identity mapping. That case is a success for
-	 * kernel_map_sync_memtype.
-	 */
-	if (ret == -EFAULT)
-		ret = 0;
-
-	return ret;
-}
-
 int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
 {
@@ -584,7 +555,9 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 	if (retval < 0)
 		return 0;
 
-	if (kernel_map_sync_memtype(offset, size, flags)) {
+	if (((pfn < max_low_pfn_mapped) ||
+	     (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) &&
+	    ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) {
 		free_memtype(offset, offset + size);
 		printk(KERN_INFO
 		"%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
@@ -632,7 +605,7 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 				int strict_prot)
 {
 	int is_ram = 0;
-	int ret;
+	int id_sz, ret;
 	unsigned long flags;
 	unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
 
@@ -673,7 +646,15 @@ static int reserve_pfn_range(u64 paddr, unsigned long size, pgprot_t *vma_prot,
 				     flags);
 	}
 
-	if (kernel_map_sync_memtype(paddr, size, flags)) {
+	/* Need to keep identity mapping in sync */
+	if (paddr >= __pa(high_memory))
+		return 0;
+
+	id_sz = (__pa(high_memory) < paddr + size) ?
+				__pa(high_memory) - paddr :
+				size;
+
+	if (ioremap_change_attr((unsigned long)__va(paddr), id_sz, flags) < 0) {
 		free_memtype(paddr, paddr + size);
 		printk(KERN_ERR
 			"%s:%d reserve_pfn_range ioremap_change_attr failed %s "
-- 
GitLab


From db0fb1848a645b0b1b033765f3a5244e7afd2e3c Mon Sep 17 00:00:00 2001
From: Peter W Morreale <pmorreale@novell.com>
Date: Thu, 15 Jan 2009 13:50:42 -0800
Subject: [PATCH 442/492] Update of Documentation: vm.txt and proc.txt

Update Documentation/sysctl/vm.txt and Documentation/filesystems/proc.txt.
 More specifically, the section on /proc/sys/vm in
Documentation/filesystems/proc.txt was removed and a link to
Documentation/sysctl/vm.txt added.

Most of the verbiage from proc.txt was simply moved in vm.txt, with new
addtional text for "swappiness" and "stat_interval".

Signed-off-by: Peter W Morreale <pmorreale@novell.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/proc.txt | 288 +-------------
 Documentation/sysctl/vm.txt        | 619 ++++++++++++++++++++---------
 2 files changed, 437 insertions(+), 470 deletions(-)

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index d105eb45282..bbebc3a43ac 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1371,292 +1371,8 @@ auto_msgmni default value is 1.
 2.4 /proc/sys/vm - The virtual memory subsystem
 -----------------------------------------------
 
-The files  in  this directory can be used to tune the operation of the virtual
-memory (VM)  subsystem  of  the  Linux  kernel.
-
-vfs_cache_pressure
-------------------
-
-Controls the tendency of the kernel to reclaim the memory which is used for
-caching of directory and inode objects.
-
-At the default value of vfs_cache_pressure=100 the kernel will attempt to
-reclaim dentries and inodes at a "fair" rate with respect to pagecache and
-swapcache reclaim.  Decreasing vfs_cache_pressure causes the kernel to prefer
-to retain dentry and inode caches.  Increasing vfs_cache_pressure beyond 100
-causes the kernel to prefer to reclaim dentries and inodes.
-
-dirty_background_bytes
-----------------------
-
-Contains the amount of dirty memory at which the pdflush background writeback
-daemon will start writeback.
-
-If dirty_background_bytes is written, dirty_background_ratio becomes a function
-of its value (dirty_background_bytes / the amount of dirtyable system memory).
-
-dirty_background_ratio
-----------------------
-
-Contains, as a percentage of the dirtyable system memory (free pages + mapped
-pages + file cache, not including locked pages and HugePages), the number of
-pages at which the pdflush background writeback daemon will start writing out
-dirty data.
-
-If dirty_background_ratio is written, dirty_background_bytes becomes a function
-of its value (dirty_background_ratio * the amount of dirtyable system memory).
-
-dirty_bytes
------------
-
-Contains the amount of dirty memory at which a process generating disk writes
-will itself start writeback.
-
-If dirty_bytes is written, dirty_ratio becomes a function of its value
-(dirty_bytes / the amount of dirtyable system memory).
-
-dirty_ratio
------------
-
-Contains, as a percentage of the dirtyable system memory (free pages + mapped
-pages + file cache, not including locked pages and HugePages), the number of
-pages at which a process which is generating disk writes will itself start
-writing out dirty data.
-
-If dirty_ratio is written, dirty_bytes becomes a function of its value
-(dirty_ratio * the amount of dirtyable system memory).
-
-dirty_writeback_centisecs
--------------------------
-
-The pdflush writeback daemons will periodically wake up and write `old' data
-out to disk.  This tunable expresses the interval between those wakeups, in
-100'ths of a second.
-
-Setting this to zero disables periodic writeback altogether.
-
-dirty_expire_centisecs
-----------------------
-
-This tunable is used to define when dirty data is old enough to be eligible
-for writeout by the pdflush daemons.  It is expressed in 100'ths of a second. 
-Data which has been dirty in-memory for longer than this interval will be
-written out next time a pdflush daemon wakes up.
-
-highmem_is_dirtyable
---------------------
-
-Only present if CONFIG_HIGHMEM is set.
-
-This defaults to 0 (false), meaning that the ratios set above are calculated
-as a percentage of lowmem only.  This protects against excessive scanning
-in page reclaim, swapping and general VM distress.
-
-Setting this to 1 can be useful on 32 bit machines where you want to make
-random changes within an MMAPed file that is larger than your available
-lowmem without causing large quantities of random IO.  Is is safe if the
-behavior of all programs running on the machine is known and memory will
-not be otherwise stressed.
-
-legacy_va_layout
-----------------
-
-If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
-will use the legacy (2.4) layout for all processes.
-
-lowmem_reserve_ratio
----------------------
-
-For some specialised workloads on highmem machines it is dangerous for
-the kernel to allow process memory to be allocated from the "lowmem"
-zone.  This is because that memory could then be pinned via the mlock()
-system call, or by unavailability of swapspace.
-
-And on large highmem machines this lack of reclaimable lowmem memory
-can be fatal.
-
-So the Linux page allocator has a mechanism which prevents allocations
-which _could_ use highmem from using too much lowmem.  This means that
-a certain amount of lowmem is defended from the possibility of being
-captured into pinned user memory.
-
-(The same argument applies to the old 16 megabyte ISA DMA region.  This
-mechanism will also defend that region from allocations which could use
-highmem or lowmem).
-
-The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
-in defending these lower zones.
-
-If you have a machine which uses highmem or ISA DMA and your
-applications are using mlock(), or if you are running with no swap then
-you probably should change the lowmem_reserve_ratio setting.
-
-The lowmem_reserve_ratio is an array. You can see them by reading this file.
--
-% cat /proc/sys/vm/lowmem_reserve_ratio
-256     256     32
--
-Note: # of this elements is one fewer than number of zones. Because the highest
-      zone's value is not necessary for following calculation.
-
-But, these values are not used directly. The kernel calculates # of protection
-pages for each zones from them. These are shown as array of protection pages
-in /proc/zoneinfo like followings. (This is an example of x86-64 box).
-Each zone has an array of protection pages like this.
-
--
-Node 0, zone      DMA
-  pages free     1355
-        min      3
-        low      3
-        high     4
-	:
-	:
-    numa_other   0
-        protection: (0, 2004, 2004, 2004)
-	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-  pagesets
-    cpu: 0 pcp: 0
-        :
--
-These protections are added to score to judge whether this zone should be used
-for page allocation or should be reclaimed.
-
-In this example, if normal pages (index=2) are required to this DMA zone and
-pages_high is used for watermark, the kernel judges this zone should not be
-used because pages_free(1355) is smaller than watermark + protection[2]
-(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
-normal page requirement. If requirement is DMA zone(index=0), protection[0]
-(=0) is used.
-
-zone[i]'s protection[j] is calculated by following expression.
-
-(i < j):
-  zone[i]->protection[j]
-  = (total sums of present_pages from zone[i+1] to zone[j] on the node)
-    / lowmem_reserve_ratio[i];
-(i = j):
-   (should not be protected. = 0;
-(i > j):
-   (not necessary, but looks 0)
-
-The default values of lowmem_reserve_ratio[i] are
-    256 (if zone[i] means DMA or DMA32 zone)
-    32  (others).
-As above expression, they are reciprocal number of ratio.
-256 means 1/256. # of protection pages becomes about "0.39%" of total present
-pages of higher zones on the node.
-
-If you would like to protect more pages, smaller values are effective.
-The minimum value is 1 (1/1 -> 100%).
-
-page-cluster
-------------
-
-page-cluster controls the number of pages which are written to swap in
-a single attempt.  The swap I/O size.
-
-It is a logarithmic value - setting it to zero means "1 page", setting
-it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
-
-The default value is three (eight pages at a time).  There may be some
-small benefits in tuning this to a different value if your workload is
-swap-intensive.
-
-overcommit_memory
------------------
-
-Controls overcommit of system memory, possibly allowing processes
-to allocate (but not use) more memory than is actually available.
-
-
-0	-	Heuristic overcommit handling. Obvious overcommits of
-		address space are refused. Used for a typical system. It
-		ensures a seriously wild allocation fails while allowing
-		overcommit to reduce swap usage.  root is allowed to
-		allocate slightly more memory in this mode. This is the
-		default.
-
-1	-	Always overcommit. Appropriate for some scientific
-		applications.
-
-2	-	Don't overcommit. The total address space commit
-		for the system is not permitted to exceed swap plus a
-		configurable percentage (default is 50) of physical RAM.
-		Depending on the percentage you use, in most situations
-		this means a process will not be killed while attempting
-		to use already-allocated memory but will receive errors
-		on memory allocation as	appropriate.
-
-overcommit_ratio
-----------------
-
-Percentage of physical memory size to include in overcommit calculations
-(see above.)
-
-Memory allocation limit = swapspace + physmem * (overcommit_ratio / 100)
-
-	swapspace = total size of all swap areas
-	physmem = size of physical memory in system
-
-nr_hugepages and hugetlb_shm_group
-----------------------------------
-
-nr_hugepages configures number of hugetlb page reserved for the system.
-
-hugetlb_shm_group contains group id that is allowed to create SysV shared
-memory segment using hugetlb page.
-
-hugepages_treat_as_movable
---------------------------
-
-This parameter is only useful when kernelcore= is specified at boot time to
-create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
-are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
-value written to hugepages_treat_as_movable allows huge pages to be allocated
-from ZONE_MOVABLE.
-
-Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
-pages pool can easily grow or shrink within. Assuming that applications are
-not running that mlock() a lot of memory, it is likely the huge pages pool
-can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
-into nr_hugepages and triggering page reclaim.
-
-laptop_mode
------------
-
-laptop_mode is a knob that controls "laptop mode". All the things that are
-controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
-
-block_dump
-----------
-
-block_dump enables block I/O debugging when set to a nonzero value. More
-information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
-
-swap_token_timeout
-------------------
-
-This file contains valid hold time of swap out protection token. The Linux
-VM has token based thrashing control mechanism and uses the token to prevent
-unnecessary page faults in thrashing situation. The unit of the value is
-second. The value would be useful to tune thrashing behavior.
-
-drop_caches
------------
-
-Writing to this will cause the kernel to drop clean caches, dentries and
-inodes from memory, causing that memory to become free.
-
-To free pagecache:
-	echo 1 > /proc/sys/vm/drop_caches
-To free dentries and inodes:
-	echo 2 > /proc/sys/vm/drop_caches
-To free pagecache, dentries and inodes:
-	echo 3 > /proc/sys/vm/drop_caches
-
-As this is a non-destructive operation and dirty objects are not freeable, the
-user should run `sync' first.
+Please see: Documentation/sysctls/vm.txt for a description of these
+entries.
 
 
 2.5 /proc/sys/dev - Device specific parameters
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index a3415070bca..3197fc83bc5 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -1,12 +1,13 @@
-Documentation for /proc/sys/vm/*	kernel version 2.2.10
+Documentation for /proc/sys/vm/*	kernel version 2.6.29
 	(c) 1998, 1999,  Rik van Riel <riel@nl.linux.org>
+	(c) 2008         Peter W. Morreale <pmorreale@novell.com>
 
 For general info and legal blurb, please look in README.
 
 ==============================================================
 
 This file contains the documentation for the sysctl files in
-/proc/sys/vm and is valid for Linux kernel version 2.2.
+/proc/sys/vm and is valid for Linux kernel version 2.6.29.
 
 The files in this directory can be used to tune the operation
 of the virtual memory (VM) subsystem of the Linux kernel and
@@ -16,180 +17,274 @@ Default values and initialization routines for most of these
 files can be found in mm/swap.c.
 
 Currently, these files are in /proc/sys/vm:
-- overcommit_memory
-- page-cluster
-- dirty_ratio
+
+- block_dump
+- dirty_background_bytes
 - dirty_background_ratio
+- dirty_bytes
 - dirty_expire_centisecs
+- dirty_ratio
 - dirty_writeback_centisecs
-- highmem_is_dirtyable   (only if CONFIG_HIGHMEM set)
+- drop_caches
+- hugepages_treat_as_movable
+- hugetlb_shm_group
+- laptop_mode
+- legacy_va_layout
+- lowmem_reserve_ratio
 - max_map_count
 - min_free_kbytes
-- laptop_mode
-- block_dump
-- drop-caches
-- zone_reclaim_mode
-- min_unmapped_ratio
 - min_slab_ratio
-- panic_on_oom
-- oom_dump_tasks
-- oom_kill_allocating_task
-- mmap_min_address
-- numa_zonelist_order
+- min_unmapped_ratio
+- mmap_min_addr
 - nr_hugepages
 - nr_overcommit_hugepages
-- nr_trim_pages		(only if CONFIG_MMU=n)
+- nr_pdflush_threads
+- nr_trim_pages         (only if CONFIG_MMU=n)
+- numa_zonelist_order
+- oom_dump_tasks
+- oom_kill_allocating_task
+- overcommit_memory
+- overcommit_ratio
+- page-cluster
+- panic_on_oom
+- percpu_pagelist_fraction
+- stat_interval
+- swappiness
+- vfs_cache_pressure
+- zone_reclaim_mode
+
 
 ==============================================================
 
-dirty_bytes, dirty_ratio, dirty_background_bytes,
-dirty_background_ratio, dirty_expire_centisecs,
-dirty_writeback_centisecs, highmem_is_dirtyable,
-vfs_cache_pressure, laptop_mode, block_dump, swap_token_timeout,
-drop-caches, hugepages_treat_as_movable:
+block_dump
 
-See Documentation/filesystems/proc.txt
+block_dump enables block I/O debugging when set to a nonzero value. More
+information on block I/O debugging is in Documentation/laptops/laptop-mode.txt.
 
 ==============================================================
 
-overcommit_memory:
+dirty_background_bytes
 
-This value contains a flag that enables memory overcommitment.
+Contains the amount of dirty memory at which the pdflush background writeback
+daemon will start writeback.
 
-When this flag is 0, the kernel attempts to estimate the amount
-of free memory left when userspace requests more memory.
+If dirty_background_bytes is written, dirty_background_ratio becomes a function
+of its value (dirty_background_bytes / the amount of dirtyable system memory).
 
-When this flag is 1, the kernel pretends there is always enough
-memory until it actually runs out.
+==============================================================
 
-When this flag is 2, the kernel uses a "never overcommit"
-policy that attempts to prevent any overcommit of memory.  
+dirty_background_ratio
 
-This feature can be very useful because there are a lot of
-programs that malloc() huge amounts of memory "just-in-case"
-and don't use much of it.
+Contains, as a percentage of total system memory, the number of pages at which
+the pdflush background writeback daemon will start writing out dirty data.
 
-The default value is 0.
+==============================================================
 
-See Documentation/vm/overcommit-accounting and
-security/commoncap.c::cap_vm_enough_memory() for more information.
+dirty_bytes
+
+Contains the amount of dirty memory at which a process generating disk writes
+will itself start writeback.
+
+If dirty_bytes is written, dirty_ratio becomes a function of its value
+(dirty_bytes / the amount of dirtyable system memory).
 
 ==============================================================
 
-overcommit_ratio:
+dirty_expire_centisecs
 
-When overcommit_memory is set to 2, the committed address
-space is not permitted to exceed swap plus this percentage
-of physical RAM.  See above.
+This tunable is used to define when dirty data is old enough to be eligible
+for writeout by the pdflush daemons.  It is expressed in 100'ths of a second.
+Data which has been dirty in-memory for longer than this interval will be
+written out next time a pdflush daemon wakes up.
+
+==============================================================
+
+dirty_ratio
+
+Contains, as a percentage of total system memory, the number of pages at which
+a process which is generating disk writes will itself start writing out dirty
+data.
 
 ==============================================================
 
-page-cluster:
+dirty_writeback_centisecs
 
-The Linux VM subsystem avoids excessive disk seeks by reading
-multiple pages on a page fault. The number of pages it reads
-is dependent on the amount of memory in your machine.
+The pdflush writeback daemons will periodically wake up and write `old' data
+out to disk.  This tunable expresses the interval between those wakeups, in
+100'ths of a second.
 
-The number of pages the kernel reads in at once is equal to
-2 ^ page-cluster. Values above 2 ^ 5 don't make much sense
-for swap because we only cluster swap data in 32-page groups.
+Setting this to zero disables periodic writeback altogether.
 
 ==============================================================
 
-max_map_count:
+drop_caches
 
-This file contains the maximum number of memory map areas a process
-may have. Memory map areas are used as a side-effect of calling
-malloc, directly by mmap and mprotect, and also when loading shared
-libraries.
+Writing to this will cause the kernel to drop clean caches, dentries and
+inodes from memory, causing that memory to become free.
 
-While most applications need less than a thousand maps, certain
-programs, particularly malloc debuggers, may consume lots of them,
-e.g., up to one or two maps per allocation.
+To free pagecache:
+	echo 1 > /proc/sys/vm/drop_caches
+To free dentries and inodes:
+	echo 2 > /proc/sys/vm/drop_caches
+To free pagecache, dentries and inodes:
+	echo 3 > /proc/sys/vm/drop_caches
 
-The default value is 65536.
+As this is a non-destructive operation and dirty objects are not freeable, the
+user should run `sync' first.
 
 ==============================================================
 
-min_free_kbytes:
+hugepages_treat_as_movable
 
-This is used to force the Linux VM to keep a minimum number 
-of kilobytes free.  The VM uses this number to compute a pages_min
-value for each lowmem zone in the system.  Each lowmem zone gets 
-a number of reserved free pages based proportionally on its size.
+This parameter is only useful when kernelcore= is specified at boot time to
+create ZONE_MOVABLE for pages that may be reclaimed or migrated. Huge pages
+are not movable so are not normally allocated from ZONE_MOVABLE. A non-zero
+value written to hugepages_treat_as_movable allows huge pages to be allocated
+from ZONE_MOVABLE.
 
-Some minimal amount of memory is needed to satisfy PF_MEMALLOC
-allocations; if you set this to lower than 1024KB, your system will
-become subtly broken, and prone to deadlock under high loads.
-
-Setting this too high will OOM your machine instantly.
+Once enabled, the ZONE_MOVABLE is treated as an area of memory the huge
+pages pool can easily grow or shrink within. Assuming that applications are
+not running that mlock() a lot of memory, it is likely the huge pages pool
+can grow to the size of ZONE_MOVABLE by repeatedly entering the desired value
+into nr_hugepages and triggering page reclaim.
 
 ==============================================================
 
-percpu_pagelist_fraction
+hugetlb_shm_group
 
-This is the fraction of pages at most (high mark pcp->high) in each zone that
-are allocated for each per cpu page list.  The min value for this is 8.  It
-means that we don't allow more than 1/8th of pages in each zone to be
-allocated in any single per_cpu_pagelist.  This entry only changes the value
-of hot per cpu pagelists.  User can specify a number like 100 to allocate
-1/100th of each zone to each per cpu page list.
+hugetlb_shm_group contains group id that is allowed to create SysV
+shared memory segment using hugetlb page.
 
-The batch value of each per cpu pagelist is also updated as a result.  It is
-set to pcp->high/4.  The upper limit of batch is (PAGE_SHIFT * 8)
+==============================================================
 
-The initial value is zero.  Kernel does not use this value at boot time to set
-the high water marks for each per cpu page list.
+laptop_mode
 
-===============================================================
+laptop_mode is a knob that controls "laptop mode". All the things that are
+controlled by this knob are discussed in Documentation/laptops/laptop-mode.txt.
 
-zone_reclaim_mode:
+==============================================================
 
-Zone_reclaim_mode allows someone to set more or less aggressive approaches to
-reclaim memory when a zone runs out of memory. If it is set to zero then no
-zone reclaim occurs. Allocations will be satisfied from other zones / nodes
-in the system.
+legacy_va_layout
 
-This is value ORed together of
+If non-zero, this sysctl disables the new 32-bit mmap mmap layout - the kernel
+will use the legacy (2.4) layout for all processes.
 
-1	= Zone reclaim on
-2	= Zone reclaim writes dirty pages out
-4	= Zone reclaim swaps pages
+==============================================================
 
-zone_reclaim_mode is set during bootup to 1 if it is determined that pages
-from remote zones will cause a measurable performance reduction. The
-page allocator will then reclaim easily reusable pages (those page
-cache pages that are currently not used) before allocating off node pages.
+lowmem_reserve_ratio
+
+For some specialised workloads on highmem machines it is dangerous for
+the kernel to allow process memory to be allocated from the "lowmem"
+zone.  This is because that memory could then be pinned via the mlock()
+system call, or by unavailability of swapspace.
+
+And on large highmem machines this lack of reclaimable lowmem memory
+can be fatal.
+
+So the Linux page allocator has a mechanism which prevents allocations
+which _could_ use highmem from using too much lowmem.  This means that
+a certain amount of lowmem is defended from the possibility of being
+captured into pinned user memory.
+
+(The same argument applies to the old 16 megabyte ISA DMA region.  This
+mechanism will also defend that region from allocations which could use
+highmem or lowmem).
+
+The `lowmem_reserve_ratio' tunable determines how aggressive the kernel is
+in defending these lower zones.
+
+If you have a machine which uses highmem or ISA DMA and your
+applications are using mlock(), or if you are running with no swap then
+you probably should change the lowmem_reserve_ratio setting.
+
+The lowmem_reserve_ratio is an array. You can see them by reading this file.
+-
+% cat /proc/sys/vm/lowmem_reserve_ratio
+256     256     32
+-
+Note: # of this elements is one fewer than number of zones. Because the highest
+      zone's value is not necessary for following calculation.
+
+But, these values are not used directly. The kernel calculates # of protection
+pages for each zones from them. These are shown as array of protection pages
+in /proc/zoneinfo like followings. (This is an example of x86-64 box).
+Each zone has an array of protection pages like this.
+
+-
+Node 0, zone      DMA
+  pages free     1355
+        min      3
+        low      3
+        high     4
+	:
+	:
+    numa_other   0
+        protection: (0, 2004, 2004, 2004)
+	^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+  pagesets
+    cpu: 0 pcp: 0
+        :
+-
+These protections are added to score to judge whether this zone should be used
+for page allocation or should be reclaimed.
+
+In this example, if normal pages (index=2) are required to this DMA zone and
+pages_high is used for watermark, the kernel judges this zone should not be
+used because pages_free(1355) is smaller than watermark + protection[2]
+(4 + 2004 = 2008). If this protection value is 0, this zone would be used for
+normal page requirement. If requirement is DMA zone(index=0), protection[0]
+(=0) is used.
+
+zone[i]'s protection[j] is calculated by following expression.
+
+(i < j):
+  zone[i]->protection[j]
+  = (total sums of present_pages from zone[i+1] to zone[j] on the node)
+    / lowmem_reserve_ratio[i];
+(i = j):
+   (should not be protected. = 0;
+(i > j):
+   (not necessary, but looks 0)
+
+The default values of lowmem_reserve_ratio[i] are
+    256 (if zone[i] means DMA or DMA32 zone)
+    32  (others).
+As above expression, they are reciprocal number of ratio.
+256 means 1/256. # of protection pages becomes about "0.39%" of total present
+pages of higher zones on the node.
+
+If you would like to protect more pages, smaller values are effective.
+The minimum value is 1 (1/1 -> 100%).
 
-It may be beneficial to switch off zone reclaim if the system is
-used for a file server and all of memory should be used for caching files
-from disk. In that case the caching effect is more important than
-data locality.
+==============================================================
 
-Allowing zone reclaim to write out pages stops processes that are
-writing large amounts of data from dirtying pages on other nodes. Zone
-reclaim will write out dirty pages if a zone fills up and so effectively
-throttle the process. This may decrease the performance of a single process
-since it cannot use all of system memory to buffer the outgoing writes
-anymore but it preserve the memory on other nodes so that the performance
-of other processes running on other nodes will not be affected.
+max_map_count:
 
-Allowing regular swap effectively restricts allocations to the local
-node unless explicitly overridden by memory policies or cpuset
-configurations.
+This file contains the maximum number of memory map areas a process
+may have. Memory map areas are used as a side-effect of calling
+malloc, directly by mmap and mprotect, and also when loading shared
+libraries.
 
-=============================================================
+While most applications need less than a thousand maps, certain
+programs, particularly malloc debuggers, may consume lots of them,
+e.g., up to one or two maps per allocation.
 
-min_unmapped_ratio:
+The default value is 65536.
 
-This is available only on NUMA kernels.
+==============================================================
 
-A percentage of the total pages in each zone.  Zone reclaim will only
-occur if more than this percentage of pages are file backed and unmapped.
-This is to insure that a minimal amount of local pages is still available for
-file I/O even if the node is overallocated.
+min_free_kbytes:
 
-The default is 1 percent.
+This is used to force the Linux VM to keep a minimum number
+of kilobytes free.  The VM uses this number to compute a pages_min
+value for each lowmem zone in the system.  Each lowmem zone gets
+a number of reserved free pages based proportionally on its size.
+
+Some minimal amount of memory is needed to satisfy PF_MEMALLOC
+allocations; if you set this to lower than 1024KB, your system will
+become subtly broken, and prone to deadlock under high loads.
+
+Setting this too high will OOM your machine instantly.
 
 =============================================================
 
@@ -211,82 +306,73 @@ and may not be fast.
 
 =============================================================
 
-panic_on_oom
+min_unmapped_ratio:
 
-This enables or disables panic on out-of-memory feature.
+This is available only on NUMA kernels.
 
-If this is set to 0, the kernel will kill some rogue process,
-called oom_killer.  Usually, oom_killer can kill rogue processes and
-system will survive.
+A percentage of the total pages in each zone.  Zone reclaim will only
+occur if more than this percentage of pages are file backed and unmapped.
+This is to insure that a minimal amount of local pages is still available for
+file I/O even if the node is overallocated.
 
-If this is set to 1, the kernel panics when out-of-memory happens.
-However, if a process limits using nodes by mempolicy/cpusets,
-and those nodes become memory exhaustion status, one process
-may be killed by oom-killer. No panic occurs in this case.
-Because other nodes' memory may be free. This means system total status
-may be not fatal yet.
+The default is 1 percent.
 
-If this is set to 2, the kernel panics compulsorily even on the
-above-mentioned.
+==============================================================
 
-The default value is 0.
-1 and 2 are for failover of clustering. Please select either
-according to your policy of failover.
+mmap_min_addr
 
-=============================================================
+This file indicates the amount of address space  which a user process will
+be restricted from mmaping.  Since kernel null dereference bugs could
+accidentally operate based on the information in the first couple of pages
+of memory userspace processes should not be allowed to write to them.  By
+default this value is set to 0 and no protections will be enforced by the
+security module.  Setting this value to something like 64k will allow the
+vast majority of applications to work correctly and provide defense in depth
+against future potential kernel bugs.
 
-oom_dump_tasks
+==============================================================
 
-Enables a system-wide task dump (excluding kernel threads) to be
-produced when the kernel performs an OOM-killing and includes such
-information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
-name.  This is helpful to determine why the OOM killer was invoked
-and to identify the rogue task that caused it.
+nr_hugepages
 
-If this is set to zero, this information is suppressed.  On very
-large systems with thousands of tasks it may not be feasible to dump
-the memory state information for each one.  Such systems should not
-be forced to incur a performance penalty in OOM conditions when the
-information may not be desired.
+Change the minimum size of the hugepage pool.
 
-If this is set to non-zero, this information is shown whenever the
-OOM killer actually kills a memory-hogging task.
+See Documentation/vm/hugetlbpage.txt
 
-The default value is 0.
+==============================================================
 
-=============================================================
+nr_overcommit_hugepages
 
-oom_kill_allocating_task
+Change the maximum size of the hugepage pool. The maximum is
+nr_hugepages + nr_overcommit_hugepages.
 
-This enables or disables killing the OOM-triggering task in
-out-of-memory situations.
+See Documentation/vm/hugetlbpage.txt
 
-If this is set to zero, the OOM killer will scan through the entire
-tasklist and select a task based on heuristics to kill.  This normally
-selects a rogue memory-hogging task that frees up a large amount of
-memory when killed.
+==============================================================
 
-If this is set to non-zero, the OOM killer simply kills the task that
-triggered the out-of-memory condition.  This avoids the expensive
-tasklist scan.
+nr_pdflush_threads
 
-If panic_on_oom is selected, it takes precedence over whatever value
-is used in oom_kill_allocating_task.
+The current number of pdflush threads.  This value is read-only.
+The value changes according to the number of dirty pages in the system.
 
-The default value is 0.
+When neccessary, additional pdflush threads are created, one per second, up to
+nr_pdflush_threads_max.
 
 ==============================================================
 
-mmap_min_addr
+nr_trim_pages
 
-This file indicates the amount of address space  which a user process will
-be restricted from mmaping.  Since kernel null dereference bugs could
-accidentally operate based on the information in the first couple of pages
-of memory userspace processes should not be allowed to write to them.  By
-default this value is set to 0 and no protections will be enforced by the
-security module.  Setting this value to something like 64k will allow the
-vast majority of applications to work correctly and provide defense in depth
-against future potential kernel bugs.
+This is available only on NOMMU kernels.
+
+This value adjusts the excess page trimming behaviour of power-of-2 aligned
+NOMMU mmap allocations.
+
+A value of 0 disables trimming of allocations entirely, while a value of 1
+trims excess pages aggressively. Any value >= 1 acts as the watermark where
+trimming of allocations is initiated.
+
+The default value is 1.
+
+See Documentation/nommu-mmap.txt for more information.
 
 ==============================================================
 
@@ -335,34 +421,199 @@ this is causing problems for your system/application.
 
 ==============================================================
 
-nr_hugepages
+oom_dump_tasks
 
-Change the minimum size of the hugepage pool.
+Enables a system-wide task dump (excluding kernel threads) to be
+produced when the kernel performs an OOM-killing and includes such
+information as pid, uid, tgid, vm size, rss, cpu, oom_adj score, and
+name.  This is helpful to determine why the OOM killer was invoked
+and to identify the rogue task that caused it.
 
-See Documentation/vm/hugetlbpage.txt
+If this is set to zero, this information is suppressed.  On very
+large systems with thousands of tasks it may not be feasible to dump
+the memory state information for each one.  Such systems should not
+be forced to incur a performance penalty in OOM conditions when the
+information may not be desired.
+
+If this is set to non-zero, this information is shown whenever the
+OOM killer actually kills a memory-hogging task.
+
+The default value is 0.
 
 ==============================================================
 
-nr_overcommit_hugepages
+oom_kill_allocating_task
 
-Change the maximum size of the hugepage pool. The maximum is
-nr_hugepages + nr_overcommit_hugepages.
+This enables or disables killing the OOM-triggering task in
+out-of-memory situations.
 
-See Documentation/vm/hugetlbpage.txt
+If this is set to zero, the OOM killer will scan through the entire
+tasklist and select a task based on heuristics to kill.  This normally
+selects a rogue memory-hogging task that frees up a large amount of
+memory when killed.
+
+If this is set to non-zero, the OOM killer simply kills the task that
+triggered the out-of-memory condition.  This avoids the expensive
+tasklist scan.
+
+If panic_on_oom is selected, it takes precedence over whatever value
+is used in oom_kill_allocating_task.
+
+The default value is 0.
 
 ==============================================================
 
-nr_trim_pages
+overcommit_memory:
 
-This is available only on NOMMU kernels.
+This value contains a flag that enables memory overcommitment.
 
-This value adjusts the excess page trimming behaviour of power-of-2 aligned
-NOMMU mmap allocations.
+When this flag is 0, the kernel attempts to estimate the amount
+of free memory left when userspace requests more memory.
 
-A value of 0 disables trimming of allocations entirely, while a value of 1
-trims excess pages aggressively. Any value >= 1 acts as the watermark where
-trimming of allocations is initiated.
+When this flag is 1, the kernel pretends there is always enough
+memory until it actually runs out.
 
-The default value is 1.
+When this flag is 2, the kernel uses a "never overcommit"
+policy that attempts to prevent any overcommit of memory.
 
-See Documentation/nommu-mmap.txt for more information.
+This feature can be very useful because there are a lot of
+programs that malloc() huge amounts of memory "just-in-case"
+and don't use much of it.
+
+The default value is 0.
+
+See Documentation/vm/overcommit-accounting and
+security/commoncap.c::cap_vm_enough_memory() for more information.
+
+==============================================================
+
+overcommit_ratio:
+
+When overcommit_memory is set to 2, the committed address
+space is not permitted to exceed swap plus this percentage
+of physical RAM.  See above.
+
+==============================================================
+
+page-cluster
+
+page-cluster controls the number of pages which are written to swap in
+a single attempt.  The swap I/O size.
+
+It is a logarithmic value - setting it to zero means "1 page", setting
+it to 1 means "2 pages", setting it to 2 means "4 pages", etc.
+
+The default value is three (eight pages at a time).  There may be some
+small benefits in tuning this to a different value if your workload is
+swap-intensive.
+
+=============================================================
+
+panic_on_oom
+
+This enables or disables panic on out-of-memory feature.
+
+If this is set to 0, the kernel will kill some rogue process,
+called oom_killer.  Usually, oom_killer can kill rogue processes and
+system will survive.
+
+If this is set to 1, the kernel panics when out-of-memory happens.
+However, if a process limits using nodes by mempolicy/cpusets,
+and those nodes become memory exhaustion status, one process
+may be killed by oom-killer. No panic occurs in this case.
+Because other nodes' memory may be free. This means system total status
+may be not fatal yet.
+
+If this is set to 2, the kernel panics compulsorily even on the
+above-mentioned.
+
+The default value is 0.
+1 and 2 are for failover of clustering. Please select either
+according to your policy of failover.
+
+=============================================================
+
+percpu_pagelist_fraction
+
+This is the fraction of pages at most (high mark pcp->high) in each zone that
+are allocated for each per cpu page list.  The min value for this is 8.  It
+means that we don't allow more than 1/8th of pages in each zone to be
+allocated in any single per_cpu_pagelist.  This entry only changes the value
+of hot per cpu pagelists.  User can specify a number like 100 to allocate
+1/100th of each zone to each per cpu page list.
+
+The batch value of each per cpu pagelist is also updated as a result.  It is
+set to pcp->high/4.  The upper limit of batch is (PAGE_SHIFT * 8)
+
+The initial value is zero.  Kernel does not use this value at boot time to set
+the high water marks for each per cpu page list.
+
+==============================================================
+
+stat_interval
+
+The time interval between which vm statistics are updated.  The default
+is 1 second.
+
+==============================================================
+
+swappiness
+
+This control is used to define how aggressive the kernel will swap
+memory pages.  Higher values will increase agressiveness, lower values
+descrease the amount of swap.
+
+The default value is 60.
+
+==============================================================
+
+vfs_cache_pressure
+------------------
+
+Controls the tendency of the kernel to reclaim the memory which is used for
+caching of directory and inode objects.
+
+At the default value of vfs_cache_pressure=100 the kernel will attempt to
+reclaim dentries and inodes at a "fair" rate with respect to pagecache and
+swapcache reclaim.  Decreasing vfs_cache_pressure causes the kernel to prefer
+to retain dentry and inode caches.  Increasing vfs_cache_pressure beyond 100
+causes the kernel to prefer to reclaim dentries and inodes.
+
+==============================================================
+
+zone_reclaim_mode:
+
+Zone_reclaim_mode allows someone to set more or less aggressive approaches to
+reclaim memory when a zone runs out of memory. If it is set to zero then no
+zone reclaim occurs. Allocations will be satisfied from other zones / nodes
+in the system.
+
+This is value ORed together of
+
+1	= Zone reclaim on
+2	= Zone reclaim writes dirty pages out
+4	= Zone reclaim swaps pages
+
+zone_reclaim_mode is set during bootup to 1 if it is determined that pages
+from remote zones will cause a measurable performance reduction. The
+page allocator will then reclaim easily reusable pages (those page
+cache pages that are currently not used) before allocating off node pages.
+
+It may be beneficial to switch off zone reclaim if the system is
+used for a file server and all of memory should be used for caching files
+from disk. In that case the caching effect is more important than
+data locality.
+
+Allowing zone reclaim to write out pages stops processes that are
+writing large amounts of data from dirtying pages on other nodes. Zone
+reclaim will write out dirty pages if a zone fills up and so effectively
+throttle the process. This may decrease the performance of a single process
+since it cannot use all of system memory to buffer the outgoing writes
+anymore but it preserve the memory on other nodes so that the performance
+of other processes running on other nodes will not be affected.
+
+Allowing regular swap effectively restricts allocations to the local
+node unless explicitly overridden by memory policies or cpuset
+configurations.
+
+============ End of Document =================================
-- 
GitLab


From 1f14081d8b31b2780e2e6e2ae2766264e1f7d38b Mon Sep 17 00:00:00 2001
From: Itai Levi <itai.levi.devel@gmail.com>
Date: Thu, 15 Jan 2009 13:50:43 -0800
Subject: [PATCH 443/492] atmel_serial: fix flow control bug

Fix the following problem, related to hardware flow control (CTS/RTS):
Transmitting while CTS line is asserted in DMA mode, due to not checking
for tx-stopped condition.

We found these problems while testing the UARTs with hardware
flow-control.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: "Andrew Victor" <avictor.za@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/atmel_serial.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index d5efd6c7790..89362d733d6 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -579,7 +579,7 @@ static void atmel_tx_dma(struct uart_port *port)
 	/* disable PDC transmit */
 	UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
 
-	if (!uart_circ_empty(xmit)) {
+	if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
 		dma_sync_single_for_device(port->dev,
 					   pdc->dma_addr,
 					   pdc->dma_size,
-- 
GitLab


From 5b96f1729064453e09805a387378e0644da1c937 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <stf_xl@wp.pl>
Date: Thu, 15 Jan 2009 13:50:44 -0800
Subject: [PATCH 444/492] atmel_spi: allow transfer when max_speed_hz = 0

For some reason I have to slowdown clock to touchscreen device.

In atmel_spi_setup() there is comment that max_speed_hz == 0 means as slow
as possible and divider is set to maximum value.  But in
atmel_spi_transfer() function is check against not zero max_speed_hz with
EINVAL returned.

Probably driver should setup divider for each transfer based on
transfer->speed_hz value, but I think that would be not necessary overhead
as all used devices have constant clock.

Below patch works fine for me.

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/spi/atmel_spi.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c
index 5e39bac9c51..56ff3e6864e 100644
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -670,8 +670,7 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
 	dev_dbg(controller, "new message %p submitted for %s\n",
 			msg, spi->dev.bus_id);
 
-	if (unlikely(list_empty(&msg->transfers)
-			|| !spi->max_speed_hz))
+	if (unlikely(list_empty(&msg->transfers)))
 		return -EINVAL;
 
 	if (as->stopping)
-- 
GitLab


From a342d215c206d955fea55d778e3803b29ee41b60 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Jan 2009 13:50:45 -0800
Subject: [PATCH 445/492] gpio: fix probe() error return in gpio driver probes

A number of drivers in drivers/gpio return -ENODEV when confronted with
missing setup parameters such as the platform data.  However, returning
-ENODEV causes the driver layer to silently ignore the driver as it
assumes the probe did not find anything and was only speculative.

To make life easier to discern why a driver is not being attached, change
to returning -EINVAL, which is a better description of the fact that the
driver data was not valid.

Also add a set of dev_dbg() statements to the error paths to provide an
better explanation of the error as there may be more that one point in the
driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/gpio/max7301.c  |  6 ++++--
 drivers/gpio/max732x.c  |  6 ++++--
 drivers/gpio/mcp23s08.c |  6 ++++--
 drivers/gpio/pca953x.c  |  6 ++++--
 drivers/gpio/pcf857x.c  | 12 ++++++++----
 5 files changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/gpio/max7301.c b/drivers/gpio/max7301.c
index 8b24d784db9..3e7f4e06386 100644
--- a/drivers/gpio/max7301.c
+++ b/drivers/gpio/max7301.c
@@ -217,8 +217,10 @@ static int __devinit max7301_probe(struct spi_device *spi)
 	int i, ret;
 
 	pdata = spi->dev.platform_data;
-	if (!pdata || !pdata->base)
-		return -ENODEV;
+	if (!pdata || !pdata->base) {
+		dev_dbg(&spi->dev, "incorrect or missing platform data\n");
+		return -EINVAL;
+	}
 
 	/*
 	 * bits_per_word cannot be configured in platform data
diff --git a/drivers/gpio/max732x.c b/drivers/gpio/max732x.c
index 55ae9a41897..f7868243af8 100644
--- a/drivers/gpio/max732x.c
+++ b/drivers/gpio/max732x.c
@@ -267,8 +267,10 @@ static int __devinit max732x_probe(struct i2c_client *client,
 	int ret, nr_port;
 
 	pdata = client->dev.platform_data;
-	if (pdata == NULL)
-		return -ENODEV;
+	if (pdata == NULL) {
+		dev_dbg(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
 
 	chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL);
 	if (chip == NULL)
diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index 89c1d222e9d..f6fae0e50e6 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -310,8 +310,10 @@ static int mcp23s08_probe(struct spi_device *spi)
 	unsigned			base;
 
 	pdata = spi->dev.platform_data;
-	if (!pdata || !gpio_is_valid(pdata->base))
-		return -ENODEV;
+	if (!pdata || !gpio_is_valid(pdata->base)) {
+		dev_dbg(&spi->dev, "invalid or missing platform data\n");
+		return -EINVAL;
+	}
 
 	for (addr = 0; addr < 4; addr++) {
 		if (!pdata->chip[addr].is_present)
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 37f35388a2a..8dc0164bd51 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -202,8 +202,10 @@ static int __devinit pca953x_probe(struct i2c_client *client,
 	int ret;
 
 	pdata = client->dev.platform_data;
-	if (pdata == NULL)
-		return -ENODEV;
+	if (pdata == NULL) {
+		dev_dbg(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
 
 	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
 	if (chip == NULL)
diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c
index 4bc2070dd4a..9525724be73 100644
--- a/drivers/gpio/pcf857x.c
+++ b/drivers/gpio/pcf857x.c
@@ -188,8 +188,10 @@ static int pcf857x_probe(struct i2c_client *client,
 	int				status;
 
 	pdata = client->dev.platform_data;
-	if (!pdata)
-		return -ENODEV;
+	if (!pdata) {
+		dev_dbg(&client->dev, "no platform data\n");
+		return -EINVAL;
+	}
 
 	/* Allocate, initialize, and register this gpio_chip. */
 	gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
@@ -248,8 +250,10 @@ static int pcf857x_probe(struct i2c_client *client,
 		else
 			status = i2c_read_le16(client);
 
-	} else
-		status = -ENODEV;
+	} else {
+		dev_dbg(&client->dev, "unsupported number of gpios\n");
+		status = -EINVAL;
+	}
 
 	if (status < 0)
 		goto fail;
-- 
GitLab


From b46578ed094122a6b36002c644711cef68aa9c9e Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Thu, 15 Jan 2009 13:50:46 -0800
Subject: [PATCH 446/492] video/framebuffer: fix bug: jpegview cannot work on
 framebuffer device other than 16BPP

Force fb_var_screeninfo color format on all Blackfin Framebuffer Drivers.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/bf54x-lq043fb.c    | 15 ++++++++++++++-
 drivers/video/bfin-t350mcqb-fb.c | 15 ++++++++++++++-
 2 files changed, 28 insertions(+), 2 deletions(-)

diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 7644ed24956..37e60b1d2ed 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -335,7 +335,20 @@ static int bfin_bf54x_fb_check_var(struct fb_var_screeninfo *var,
 				   struct fb_info *info)
 {
 
-	if (var->bits_per_pixel != LCD_BPP) {
+	switch (var->bits_per_pixel) {
+	case 24:/* TRUECOLOUR, 16m */
+		var->red.offset = 16;
+		var->green.offset = 8;
+		var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length = 8;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		var->transp.msb_right = 0;
+		var->red.msb_right = 0;
+		var->green.msb_right = 0;
+		var->blue.msb_right = 0;
+		break;
+	default:
 		pr_debug("%s: depth not supported: %u BPP\n", __func__,
 			 var->bits_per_pixel);
 		return -EINVAL;
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c
index a9b3ada05d9..2a423d3a2a8 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/bfin-t350mcqb-fb.c
@@ -254,7 +254,20 @@ static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var,
 				   struct fb_info *info)
 {
 
-	if (var->bits_per_pixel != LCD_BPP) {
+	switch (var->bits_per_pixel) {
+	case 24:/* TRUECOLOUR, 16m */
+		var->red.offset = 0;
+		var->green.offset = 8;
+		var->blue.offset = 16;
+		var->red.length = var->green.length = var->blue.length = 8;
+		var->transp.offset = 0;
+		var->transp.length = 0;
+		var->transp.msb_right = 0;
+		var->red.msb_right = 0;
+		var->green.msb_right = 0;
+		var->blue.msb_right = 0;
+		break;
+	default:
 		pr_debug("%s: depth not supported: %u BPP\n", __func__,
 			 var->bits_per_pixel);
 		return -EINVAL;
-- 
GitLab


From 822c18f2e38cbc775792ab65ace4f9198678dec9 Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Thu, 15 Jan 2009 13:50:48 -0800
Subject: [PATCH 447/492] alpha: fix vmalloc breakage

On alpha, we have to map some stuff in the VMALLOC space very early in the
boot process (to make SRM console callbacks work and so on, see
arch/alpha/mm/init.c).  For old VM allocator, we just manually placed a
vm_struct onto the global vmlist and this worked for ages.

Unfortunately, the new allocator isn't aware of this, so it constantly
tries to allocate the VM space which is already in use, making vmalloc on
alpha defunct.

This patch forces KVA to import vmlist entries on init.

[akpm@linux-foundation.org: remove unneeded check (per Johannes)]
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/vmalloc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index c5db9a7264d..7e00b280648 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -24,6 +24,7 @@
 #include <linux/rbtree.h>
 #include <linux/radix-tree.h>
 #include <linux/rcupdate.h>
+#include <linux/bootmem.h>
 
 #include <asm/atomic.h>
 #include <asm/uaccess.h>
@@ -984,6 +985,8 @@ EXPORT_SYMBOL(vm_map_ram);
 
 void __init vmalloc_init(void)
 {
+	struct vmap_area *va;
+	struct vm_struct *tmp;
 	int i;
 
 	for_each_possible_cpu(i) {
@@ -996,6 +999,14 @@ void __init vmalloc_init(void)
 		vbq->nr_dirty = 0;
 	}
 
+	/* Import existing vmlist entries. */
+	for (tmp = vmlist; tmp; tmp = tmp->next) {
+		va = alloc_bootmem(sizeof(struct vmap_area));
+		va->flags = tmp->flags | VM_VM_AREA;
+		va->va_start = (unsigned long)tmp->addr;
+		va->va_end = va->va_start + tmp->size;
+		__insert_vmap_area(va);
+	}
 	vmap_initialized = true;
 }
 
-- 
GitLab


From 44c12cb2f564b532971c1474073fcbbb8336242e Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Thu, 15 Jan 2009 13:50:49 -0800
Subject: [PATCH 448/492] edac: add MAINTAINERS entry for i5400 EDAC driver

i5400 EDAC driver were added upstream by those changesets:

 - 920c8df6ac678fdb8c49a6ce2e47a98e62757d77 "edac: driver for i5400 MCH (Seaburg)"
 - 8375d4909aee4c18798f373ecf24a79f040f75fc "edac: driver for i5400 MCH (update)"

Update MAINTAINERS entry for this file to correspond to the driver
maintainer.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: Ben Woodard <woodard@redhat.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 3f6ef02ad68..73548f8ad0b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1581,6 +1581,13 @@ L:	bluesmoke-devel@lists.sourceforge.net
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 
+EDAC-I5400
+P:	Mauro Carvalho Chehab
+M:	mchehab@redhat.com
+L:	bluesmoke-devel@lists.sourceforge.net
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+
 EDAC-I82975X
 P:	Ranganathan Desikan
 P:	Arvind R.
-- 
GitLab


From 89365e264104b52da6a61c4e227bb5a934764fa7 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Thu, 15 Jan 2009 13:50:50 -0800
Subject: [PATCH 449/492] sysrq documentation: remove the redundant updated
 date

git is maintaining the last update time much more accuratly than the
internal update time.  Remove it.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/sysrq.txt | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index 10a0263ebb3..265f637b97d 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -1,6 +1,5 @@
 Linux Magic System Request Key Hacks
 Documentation for sysrq.c
-Last update: 2007-AUG-04
 
 *  What is the magic SysRq key?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-- 
GitLab


From 47c33d9c1984ae4c5bd1f144024eacc14c5bc0c0 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Thu, 15 Jan 2009 13:50:51 -0800
Subject: [PATCH 450/492] sysrq documentation: document why the command header
 only is shown

Document the interactions between loglevel and the sysrq output.  Also
document how to work round it should output be required on the console.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Martin Mares <mj@ucw.cz>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/sysrq.txt | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index 265f637b97d..9e592c718af 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -210,6 +210,24 @@ within a function called by handle_sysrq, you must be aware that you are in
 a lock (you are also in an interrupt handler, which means don't sleep!), so
 you must call __handle_sysrq_nolock instead.
 
+*  When I hit a SysRq key combination only the header appears on the console?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Sysrq output is subject to the same console loglevel control as all
+other console output.  This means that if the kernel was booted 'quiet'
+as is common on distro kernels the output may not appear on the actual
+console, even though it will appear in the dmesg buffer, and be accessible
+via the dmesg command and to the consumers of /proc/kmsg.  As a specific
+exception the header line from the sysrq command is passed to all console
+consumers as if the current loglevel was maximum.  If only the header
+is emitted it is almost certain that the kernel loglevel is too low.
+Should you require the output on the console channel then you will need
+to temporarily up the console loglevel using alt-sysrq-8 or:
+
+    echo 8 > /proc/sysrq-trigger
+
+Remember to return the loglevel to normal after triggering the sysrq
+command you are interested in.
+
 *  I have more questions, who can I ask?
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 And I'll answer any questions about the registration system you got, also
-- 
GitLab


From fb144adc517d9ebe8fd8d98a5696fb68ec91e1f5 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Thu, 15 Jan 2009 13:50:52 -0800
Subject: [PATCH 451/492] sysrq: add commentary on why we use the console
 loglevel over using KERN_EMERG

Add an explanitory comment as to why we modify the kernel console loglevel
rather than simply moving sysrq messages to KERN_EMERG level.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/sysrq.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index d41b9f6f790..33a9351c896 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -473,6 +473,12 @@ void __handle_sysrq(int key, struct tty_struct *tty, int check_mask)
 	unsigned long flags;
 
 	spin_lock_irqsave(&sysrq_key_table_lock, flags);
+	/*
+	 * Raise the apparent loglevel to maximum so that the sysrq header
+	 * is shown to provide the user with positive feedback.  We do not
+	 * simply emit this at KERN_EMERG as that would change message
+	 * routing in the consumers of /proc/kmsg.
+	 */
 	orig_log_level = console_loglevel;
 	console_loglevel = 7;
 	printk(KERN_INFO "SysRq : ");
-- 
GitLab


From a748384bba1754409383ba9f0738bffdfa3fd431 Mon Sep 17 00:00:00 2001
From: Alessandro Zummo <a.zummo@towertech.it>
Date: Thu, 15 Jan 2009 13:50:52 -0800
Subject: [PATCH 452/492] rtc: tw4030 add alarm/update interfaces

- implement alarm_irq_enable
- return correct error code when registering fails

[dbrownell@users.sourceforge.net: build fixes, force 1/sec irqs]
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Samuel Ortiz <sameo@openedhand.com>
Cc: rtc-linux@googlegroups.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-twl4030.c | 44 +++++++++------------------------------
 1 file changed, 10 insertions(+), 34 deletions(-)

diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
index 8ce5f74ee45..25dc3e1cedb 100644
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl4030.c
@@ -120,7 +120,7 @@ static int twl4030_rtc_write_u8(u8 data, u8 reg)
 static unsigned char rtc_irq_bits;
 
 /*
- * Enable timer and/or alarm interrupts.
+ * Enable 1/second update and/or alarm interrupts.
  */
 static int set_rtc_irq_bit(unsigned char bit)
 {
@@ -128,6 +128,7 @@ static int set_rtc_irq_bit(unsigned char bit)
 	int ret;
 
 	val = rtc_irq_bits | bit;
+	val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
 	ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
 	if (ret == 0)
 		rtc_irq_bits = val;
@@ -136,7 +137,7 @@ static int set_rtc_irq_bit(unsigned char bit)
 }
 
 /*
- * Disable timer and/or alarm interrupts.
+ * Disable update and/or alarm interrupts.
  */
 static int mask_rtc_irq_bit(unsigned char bit)
 {
@@ -151,7 +152,7 @@ static int mask_rtc_irq_bit(unsigned char bit)
 	return ret;
 }
 
-static inline int twl4030_rtc_alarm_irq_set_state(int enabled)
+static int twl4030_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
 {
 	int ret;
 
@@ -163,7 +164,7 @@ static inline int twl4030_rtc_alarm_irq_set_state(int enabled)
 	return ret;
 }
 
-static inline int twl4030_rtc_irq_set_state(int enabled)
+static int twl4030_rtc_update_irq_enable(struct device *dev, unsigned enabled)
 {
 	int ret;
 
@@ -292,7 +293,7 @@ static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	unsigned char alarm_data[ALL_TIME_REGS + 1];
 	int ret;
 
-	ret = twl4030_rtc_alarm_irq_set_state(0);
+	ret = twl4030_rtc_alarm_irq_enable(dev, 0);
 	if (ret)
 		goto out;
 
@@ -312,35 +313,11 @@ static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 	}
 
 	if (alm->enabled)
-		ret = twl4030_rtc_alarm_irq_set_state(1);
+		ret = twl4030_rtc_alarm_irq_enable(dev, 1);
 out:
 	return ret;
 }
 
-#ifdef	CONFIG_RTC_INTF_DEV
-
-static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd,
-			     unsigned long arg)
-{
-	switch (cmd) {
-	case RTC_AIE_OFF:
-		return twl4030_rtc_alarm_irq_set_state(0);
-	case RTC_AIE_ON:
-		return twl4030_rtc_alarm_irq_set_state(1);
-	case RTC_UIE_OFF:
-		return twl4030_rtc_irq_set_state(0);
-	case RTC_UIE_ON:
-		return twl4030_rtc_irq_set_state(1);
-
-	default:
-		return -ENOIOCTLCMD;
-	}
-}
-
-#else
-#define	twl4030_rtc_ioctl	NULL
-#endif
-
 static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc)
 {
 	unsigned long events = 0;
@@ -400,11 +377,12 @@ out:
 }
 
 static struct rtc_class_ops twl4030_rtc_ops = {
-	.ioctl		= twl4030_rtc_ioctl,
 	.read_time	= twl4030_rtc_read_time,
 	.set_time	= twl4030_rtc_set_time,
 	.read_alarm	= twl4030_rtc_read_alarm,
 	.set_alarm	= twl4030_rtc_set_alarm,
+	.alarm_irq_enable = twl4030_rtc_alarm_irq_enable,
+	.update_irq_enable = twl4030_rtc_update_irq_enable,
 };
 
 /*----------------------------------------------------------------------*/
@@ -422,7 +400,7 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
 	rtc = rtc_device_register(pdev->name,
 				  &pdev->dev, &twl4030_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc)) {
-		ret = -EINVAL;
+		ret = PTR_ERR(rtc);
 		dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
 			PTR_ERR(rtc));
 		goto out0;
@@ -432,7 +410,6 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, rtc);
 
 	ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
-
 	if (ret < 0)
 		goto out1;
 
@@ -475,7 +452,6 @@ static int __devinit twl4030_rtc_probe(struct platform_device *pdev)
 
 	return ret;
 
-
 out2:
 	free_irq(irq, rtc);
 out1:
-- 
GitLab


From 4216d0bd8fef77b7926eb065a766e2ee003acf6a Mon Sep 17 00:00:00 2001
From: Antonio Ospite <ospite@studenti.unina.it>
Date: Thu, 15 Jan 2009 13:50:54 -0800
Subject: [PATCH 453/492] rtc-pxa: fix build failure

Fix these build errors:

  CC      drivers/rtc/rtc-pxa.o
drivers/rtc/rtc-pxa.c: In function `pxa_rtc_init':
drivers/rtc/rtc-pxa.c:472: error: implicit declaration of function `cpu_is_pxa27x'
drivers/rtc/rtc-pxa.c:472: error: implicit declaration of function `cpu_is_pxa3xx'

Signed-off-by: Antonio Ospite <ao2@openezx.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-pxa.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index cc7eb8767b8..bd56a033bfd 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -27,6 +27,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
+#include <mach/hardware.h>
+
 #define TIMER_FREQ		CLOCK_TICK_RATE
 #define RTC_DEF_DIVIDER		(32768 - 1)
 #define RTC_DEF_TRIM		0
-- 
GitLab


From cafa1d8b0c90252e73f20db1b6f32cf88e73ff17 Mon Sep 17 00:00:00 2001
From: Matti Halme <matti.halme@nokia.com>
Date: Thu, 15 Jan 2009 13:50:56 -0800
Subject: [PATCH 454/492] rtc: rtc-twl4030 don't mask alarm interrupts on
 shutdown

A triggering RTC alarm should be able to power on a device that has been
powered off. This patch enables that on twl4030 by not masking the alarm
interrupt at shutdown.

Signed-off-by: Matti Halme <matti.halme@nokia.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Samuel Ortiz <sameo@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-twl4030.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
index 25dc3e1cedb..ad35f76c46b 100644
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl4030.c
@@ -482,8 +482,9 @@ static int __devexit twl4030_rtc_remove(struct platform_device *pdev)
 
 static void twl4030_rtc_shutdown(struct platform_device *pdev)
 {
-	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
-			 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+	/* mask timer interrupts, but leave alarm interrupts on to enable
+	   power-on when alarm is triggered */
+	mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
 }
 
 #ifdef CONFIG_PM
-- 
GitLab


From 158bc69effbf96f59c01cdeb20f8d4c184e59f8e Mon Sep 17 00:00:00 2001
From: Dean Nelson <dcn@sgi.com>
Date: Thu, 15 Jan 2009 13:50:57 -0800
Subject: [PATCH 455/492] sgi-xp: eliminate false detection of no heartbeat

After XPC has been up and running on multiple partitions for any length of
time, if XPC on one of the partitions is stopped and restarted (either by
a rmmod/insmod or a system restart), it is possible for the XPCs running
on the other partitions to falsely detect a lack of heartbeat from the XPC
that was just restarted.  This false detection will occur if the restarted
XPC comes up within the five-seconds preceding one of the other XPC's
heartbeat check (which occurs once every twenty seconds).

The detection of no heartbeat results in the detecting XPC deactivating
from the just restarted XPC.  The only remedy is to restart one of the
XPCs and hope that one doesn't hit this five-second window on any of the
other partitions.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/sgi-xp/xpc_sn2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/sgi-xp/xpc_sn2.c b/drivers/misc/sgi-xp/xpc_sn2.c
index 73b7fb8de47..82fb9958f22 100644
--- a/drivers/misc/sgi-xp/xpc_sn2.c
+++ b/drivers/misc/sgi-xp/xpc_sn2.c
@@ -899,7 +899,7 @@ xpc_update_partition_info_sn2(struct xpc_partition *part, u8 remote_rp_version,
 	dev_dbg(xpc_part, "  remote_vars_pa = 0x%016lx\n",
 		part_sn2->remote_vars_pa);
 
-	part->last_heartbeat = remote_vars->heartbeat;
+	part->last_heartbeat = remote_vars->heartbeat - 1;
 	dev_dbg(xpc_part, "  last_heartbeat = 0x%016lx\n",
 		part->last_heartbeat);
 
-- 
GitLab


From a6b2f87be1aafedc585bad86b77c2e2bbd49b308 Mon Sep 17 00:00:00 2001
From: Paul Fulghum <paulkf@microgate.com>
Date: Thu, 15 Jan 2009 13:50:57 -0800
Subject: [PATCH 456/492] synclink_gt: enable RI interrupt

- Enable ring indicator interrupt.

- Remove vendor specific CVS version tags.

Signed-off-by: Paul Fulghum <paulkf@microgate.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/synclink_gt.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 53544e21f19..f329f459817 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -1,6 +1,4 @@
 /*
- * $Id: synclink_gt.c,v 4.50 2007/07/25 19:29:25 paulkf Exp $
- *
  * Device driver for Microgate SyncLink GT serial adapters.
  *
  * written by Paul Fulghum for Microgate Corporation
@@ -91,7 +89,6 @@
  * module identification
  */
 static char *driver_name     = "SyncLink GT";
-static char *driver_version  = "$Revision: 4.50 $";
 static char *tty_driver_name = "synclink_gt";
 static char *tty_dev_prefix  = "ttySLG";
 MODULE_LICENSE("GPL");
@@ -1309,7 +1306,7 @@ static int read_proc(char *page, char **start, off_t off, int count,
 	off_t	begin = 0;
 	struct slgt_info *info;
 
-	len += sprintf(page, "synclink_gt driver:%s\n", driver_version);
+	len += sprintf(page, "synclink_gt driver\n");
 
 	info = slgt_device_list;
 	while( info ) {
@@ -2441,7 +2438,7 @@ static void program_hw(struct slgt_info *info)
 	info->ri_chkcount = 0;
 	info->dsr_chkcount = 0;
 
-	slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR);
+	slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR | IRQ_RI);
 	get_signals(info);
 
 	if (info->netcount ||
@@ -3576,7 +3573,7 @@ static void slgt_cleanup(void)
 	struct slgt_info *info;
 	struct slgt_info *tmp;
 
-	printk("unload %s %s\n", driver_name, driver_version);
+	printk(KERN_INFO "unload %s\n", driver_name);
 
 	if (serial_driver) {
 		for (info=slgt_device_list ; info != NULL ; info=info->next_device)
@@ -3619,7 +3616,7 @@ static int __init slgt_init(void)
 {
 	int rc;
 
- 	printk("%s %s\n", driver_name, driver_version);
+	printk(KERN_INFO "%s\n", driver_name);
 
 	serial_driver = alloc_tty_driver(MAX_DEVICES);
 	if (!serial_driver) {
@@ -3650,9 +3647,8 @@ static int __init slgt_init(void)
 		goto error;
 	}
 
- 	printk("%s %s, tty major#%d\n",
-		driver_name, driver_version,
-		serial_driver->major);
+	printk(KERN_INFO "%s, tty major#%d\n",
+	       driver_name, serial_driver->major);
 
 	slgt_device_count = 0;
 	if ((rc = pci_register_driver(&pci_driver)) < 0) {
-- 
GitLab


From 23964d2d02984d44aeb2d84d7ffb3359e728df43 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Thu, 15 Jan 2009 13:50:58 -0800
Subject: [PATCH 457/492] cgroups: clean up Kconfig

- move CONFIG_PROC_PID_CPUSET into cgroup menu
- move MM_OWNER to the bottom for better menu indent
- fix typos
- use tabs not spaces

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Paul Menage <menage@google.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 init/Kconfig | 56 ++++++++++++++++++++++++++--------------------------
 1 file changed, 28 insertions(+), 28 deletions(-)

diff --git a/init/Kconfig b/init/Kconfig
index a724a149bf3..56fd93c63c7 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -328,11 +328,10 @@ config CGROUP_SCHED
 
 endchoice
 
-menu "Control Group support"
-config CGROUPS
-	bool "Control Group support"
+menuconfig CGROUPS
+	boolean "Control Group support"
 	help
-	  This option add support for grouping sets of processes together, for
+	  This option adds support for grouping sets of processes together, for
 	  use with process control subsystems such as Cpusets, CFS, memory
 	  controls or device isolation.
 	  See
@@ -343,6 +342,8 @@ config CGROUPS
 
 	  Say N if unsure.
 
+if CGROUPS
+
 config CGROUP_DEBUG
 	bool "Example debug cgroup subsystem"
 	depends on CGROUPS
@@ -350,24 +351,24 @@ config CGROUP_DEBUG
 	help
 	  This option enables a simple cgroup subsystem that
 	  exports useful debugging information about the cgroups
-	  framework
+	  framework.
 
-	  Say N if unsure
+	  Say N if unsure.
 
 config CGROUP_NS
-        bool "Namespace cgroup subsystem"
-        depends on CGROUPS
-        help
-          Provides a simple namespace cgroup subsystem to
-          provide hierarchical naming of sets of namespaces,
-          for instance virtual servers and checkpoint/restart
-          jobs.
+	bool "Namespace cgroup subsystem"
+	depends on CGROUPS
+	help
+	  Provides a simple namespace cgroup subsystem to
+	  provide hierarchical naming of sets of namespaces,
+	  for instance virtual servers and checkpoint/restart
+	  jobs.
 
 config CGROUP_FREEZER
-        bool "control group freezer subsystem"
-        depends on CGROUPS
-        help
-          Provides a way to freeze and unfreeze all tasks in a
+	bool "Freezer cgroup subsystem"
+	depends on CGROUPS
+	help
+	  Provides a way to freeze and unfreeze all tasks in a
 	  cgroup.
 
 config CGROUP_DEVICE
@@ -388,18 +389,23 @@ config CPUSETS
 
 	  Say N if unsure.
 
+config PROC_PID_CPUSET
+	bool "Include legacy /proc/<pid>/cpuset file"
+	depends on CPUSETS
+	default y
+
 config CGROUP_CPUACCT
 	bool "Simple CPU accounting cgroup subsystem"
 	depends on CGROUPS
 	help
 	  Provides a simple Resource Controller for monitoring the
-	  total CPU consumed by the tasks in a cgroup
+	  total CPU consumed by the tasks in a cgroup.
 
 config RESOURCE_COUNTERS
 	bool "Resource counters"
 	help
 	  This option enables controller independent resource accounting
-          infrastructure that works with cgroups
+	  infrastructure that works with cgroups.
 	depends on CGROUPS
 
 config CGROUP_MEM_RES_CTLR
@@ -425,9 +431,6 @@ config CGROUP_MEM_RES_CTLR
 	  This config option also selects MM_OWNER config option, which
 	  could in turn add some fork/exit overhead.
 
-config MM_OWNER
-	bool
-
 config CGROUP_MEM_RES_CTLR_SWAP
 	bool "Memory Resource Controller Swap Extension(EXPERIMENTAL)"
 	depends on CGROUP_MEM_RES_CTLR && SWAP && EXPERIMENTAL
@@ -444,8 +447,10 @@ config CGROUP_MEM_RES_CTLR_SWAP
 	  there will be no overhead from this. Even when you set this config=y,
 	  if boot option "noswapaccount" is set, swap will not be accounted.
 
+endif # CGROUPS
 
-endmenu
+config MM_OWNER
+	bool
 
 config SYSFS_DEPRECATED
 	bool
@@ -483,11 +488,6 @@ config SYSFS_DEPRECATED_V2
 	  if the original kernel, that came with your distribution, has
 	  this option set to N.
 
-config PROC_PID_CPUSET
-	bool "Include legacy /proc/<pid>/cpuset file"
-	depends on CPUSETS
-	default y
-
 config RELAY
 	bool "Kernel->user space relay support (formerly relayfs)"
 	help
-- 
GitLab


From 45ce80fb6b6f9594d1396d44dd7e7c02d596fef8 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Thu, 15 Jan 2009 13:50:59 -0800
Subject: [PATCH 458/492] cgroups: consolidate cgroup documents

Move Documentation/cpusets.txt and Documentation/controllers/* to
Documentation/cgroups/

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/cgroups/cgroups.txt                        | 5 +++--
 Documentation/{controllers => cgroups}/cpuacct.txt       | 0
 Documentation/{ => cgroups}/cpusets.txt                  | 0
 Documentation/{controllers => cgroups}/devices.txt       | 0
 Documentation/{controllers => cgroups}/memcg_test.txt    | 2 +-
 Documentation/{controllers => cgroups}/memory.txt        | 0
 .../{controllers => cgroups}/resource_counter.txt        | 0
 Documentation/scheduler/sched-design-CFS.txt             | 2 +-
 include/linux/res_counter.h                              | 2 +-
 init/Kconfig                                             | 9 ++++-----
 kernel/cpuset.c                                          | 2 +-
 11 files changed, 11 insertions(+), 11 deletions(-)
 rename Documentation/{controllers => cgroups}/cpuacct.txt (100%)
 rename Documentation/{ => cgroups}/cpusets.txt (100%)
 rename Documentation/{controllers => cgroups}/devices.txt (100%)
 rename Documentation/{controllers => cgroups}/memcg_test.txt (99%)
 rename Documentation/{controllers => cgroups}/memory.txt (100%)
 rename Documentation/{controllers => cgroups}/resource_counter.txt (100%)

diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt
index e33ee74eee7..d9e5d6f41b9 100644
--- a/Documentation/cgroups/cgroups.txt
+++ b/Documentation/cgroups/cgroups.txt
@@ -1,7 +1,8 @@
 				CGROUPS
 				-------
 
-Written by Paul Menage <menage@google.com> based on Documentation/cpusets.txt
+Written by Paul Menage <menage@google.com> based on
+Documentation/cgroups/cpusets.txt
 
 Original copyright statements from cpusets.txt:
 Portions Copyright (C) 2004 BULL SA.
@@ -68,7 +69,7 @@ On their own, the only use for cgroups is for simple job
 tracking. The intention is that other subsystems hook into the generic
 cgroup support to provide new attributes for cgroups, such as
 accounting/limiting the resources which processes in a cgroup can
-access. For example, cpusets (see Documentation/cpusets.txt) allows
+access. For example, cpusets (see Documentation/cgroups/cpusets.txt) allows
 you to associate a set of CPUs and a set of memory nodes with the
 tasks in each cgroup.
 
diff --git a/Documentation/controllers/cpuacct.txt b/Documentation/cgroups/cpuacct.txt
similarity index 100%
rename from Documentation/controllers/cpuacct.txt
rename to Documentation/cgroups/cpuacct.txt
diff --git a/Documentation/cpusets.txt b/Documentation/cgroups/cpusets.txt
similarity index 100%
rename from Documentation/cpusets.txt
rename to Documentation/cgroups/cpusets.txt
diff --git a/Documentation/controllers/devices.txt b/Documentation/cgroups/devices.txt
similarity index 100%
rename from Documentation/controllers/devices.txt
rename to Documentation/cgroups/devices.txt
diff --git a/Documentation/controllers/memcg_test.txt b/Documentation/cgroups/memcg_test.txt
similarity index 99%
rename from Documentation/controllers/memcg_test.txt
rename to Documentation/cgroups/memcg_test.txt
index 08d4d3ea0d7..19533f93b7a 100644
--- a/Documentation/controllers/memcg_test.txt
+++ b/Documentation/cgroups/memcg_test.txt
@@ -6,7 +6,7 @@ Because VM is getting complex (one of reasons is memcg...), memcg's behavior
 is complex. This is a document for memcg's internal behavior.
 Please note that implementation details can be changed.
 
-(*) Topics on API should be in Documentation/controllers/memory.txt)
+(*) Topics on API should be in Documentation/cgroups/memory.txt)
 
 0. How to record usage ?
    2 objects are used.
diff --git a/Documentation/controllers/memory.txt b/Documentation/cgroups/memory.txt
similarity index 100%
rename from Documentation/controllers/memory.txt
rename to Documentation/cgroups/memory.txt
diff --git a/Documentation/controllers/resource_counter.txt b/Documentation/cgroups/resource_counter.txt
similarity index 100%
rename from Documentation/controllers/resource_counter.txt
rename to Documentation/cgroups/resource_counter.txt
diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt
index 8398ca4ff4e..6f33593e59e 100644
--- a/Documentation/scheduler/sched-design-CFS.txt
+++ b/Documentation/scheduler/sched-design-CFS.txt
@@ -231,7 +231,7 @@ CPU bandwidth control purposes:
 
    This options needs CONFIG_CGROUPS to be defined, and lets the administrator
    create arbitrary groups of tasks, using the "cgroup" pseudo filesystem.  See
-   Documentation/cgroups.txt for more information about this filesystem.
+   Documentation/cgroups/cgroups.txt for more information about this filesystem.
 
 Only one of these options to group tasks can be chosen and not both.
 
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index dede0a2cfc4..4c5bcf6ca7e 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -9,7 +9,7 @@
  *
  * Author: Pavel Emelianov <xemul@openvz.org>
  *
- * See Documentation/controllers/resource_counter.txt for more
+ * See Documentation/cgroups/resource_counter.txt for more
  * info about what this counter is.
  */
 
diff --git a/init/Kconfig b/init/Kconfig
index 56fd93c63c7..2af83825634 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -323,8 +323,8 @@ config CGROUP_SCHED
 	  This option allows you to create arbitrary task groups
 	  using the "cgroup" pseudo filesystem and control
 	  the cpu bandwidth allocated to each such task group.
-	  Refer to Documentation/cgroups.txt for more information
-	  on "cgroup" pseudo filesystem.
+	  Refer to Documentation/cgroups/cgroups.txt for more
+	  information on "cgroup" pseudo filesystem.
 
 endchoice
 
@@ -335,10 +335,9 @@ menuconfig CGROUPS
 	  use with process control subsystems such as Cpusets, CFS, memory
 	  controls or device isolation.
 	  See
-		- Documentation/cpusets.txt	(Cpusets)
 		- Documentation/scheduler/sched-design-CFS.txt	(CFS)
-		- Documentation/cgroups/ (features for grouping, isolation)
-		- Documentation/controllers/ (features for resource control)
+		- Documentation/cgroups/ (features for grouping, isolation
+					  and resource control)
 
 	  Say N if unsure.
 
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 647c77a88fc..a85678865c5 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -568,7 +568,7 @@ update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c)
  * load balancing domains (sched domains) as specified by that partial
  * partition.
  *
- * See "What is sched_load_balance" in Documentation/cpusets.txt
+ * See "What is sched_load_balance" in Documentation/cgroups/cpusets.txt
  * for a background explanation of this.
  *
  * Does not return errors, on the theory that the callers of this
-- 
GitLab


From b098161b4d0231f7dc5306111d576c0bfe0c8eba Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Thu, 15 Jan 2009 13:51:00 -0800
Subject: [PATCH 459/492] idr: fix wrong kernel-doc

idr_get_new_above() and ida_get_new_above() return an id in the range of
@staring_id ... 0x7fffffff, not 0 ... 0x7fffffff.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/idr.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/lib/idr.c b/lib/idr.c
index 1c4f9281f41..6b7cfa6508f 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -292,7 +292,7 @@ static int idr_get_new_above_int(struct idr *idp, void *ptr, int starting_id)
  * and go back to the idr_pre_get() call.  If the idr is full, it will
  * return -ENOSPC.
  *
- * @id returns a value in the range 0 ... 0x7fffffff
+ * @id returns a value in the range @starting_id ... 0x7fffffff
  */
 int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
 {
@@ -723,7 +723,7 @@ EXPORT_SYMBOL(ida_pre_get);
  * and go back to the ida_pre_get() call.  If the ida is full, it will
  * return -ENOSPC.
  *
- * @p_id returns a value in the range 0 ... 0x7fffffff.
+ * @p_id returns a value in the range @starting_id ... 0x7fffffff.
  */
 int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
 {
-- 
GitLab


From 65a67bd2644bef225ee318dde76016a4697218fa Mon Sep 17 00:00:00 2001
From: Marcus Meissner <meissner@suse.de>
Date: Thu, 15 Jan 2009 13:51:00 -0800
Subject: [PATCH 460/492] Documentation/accounting/getdelays.c: fix endless
 loop

When no option is passed to getdelays it just hangs, waiting
for a reply which will never come.

This patch prints usage() when no output marker is specified.

Signed-off-by: Marcus Meissner <meissner@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/accounting/getdelays.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c
index cc49400b4af..7ea231172c8 100644
--- a/Documentation/accounting/getdelays.c
+++ b/Documentation/accounting/getdelays.c
@@ -392,6 +392,10 @@ int main(int argc, char *argv[])
 			goto err;
 		}
 	}
+	if (!maskset && !tid && !containerset) {
+		usage();
+		goto err;
+	}
 
 	do {
 		int i;
-- 
GitLab


From 3eabdb76a03bbe8f556162738c264dbfb24cff6a Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 15 Jan 2009 13:51:01 -0800
Subject: [PATCH 461/492] jbd: fix missing kernel-doc

Fix jbd header file kernel-doc notation:

Warning(linux-2.6.28-git13//include/linux/jbd.h:823): No description found for parameter 'j_average_commit_time'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/jbd.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/linux/jbd.h b/include/linux/jbd.h
index 6384b19efe6..64246dce566 100644
--- a/include/linux/jbd.h
+++ b/include/linux/jbd.h
@@ -614,6 +614,8 @@ struct transaction_s
  * @j_wbufsize: maximum number of buffer_heads allowed in j_wbuf, the
  *	number that will fit in j_blocksize
  * @j_last_sync_writer: most recent pid which did a synchronous write
+ * @j_average_commit_time: the average amount of time in nanoseconds it
+ *	takes to commit a transaction to the disk.
  * @j_private: An opaque pointer to fs-private information.
  */
 
-- 
GitLab


From 6ae301e85c9c58d2f430a8a7057ce488b7ff76df Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Thu, 15 Jan 2009 13:51:01 -0800
Subject: [PATCH 462/492] resources: fix parameter name and kernel-doc

Fix __request_region() parameter kernel-doc notation and parameter name:

Warning(linux-2.6.28-git10//kernel/resource.c:627): No description found for parameter 'flags'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/ioport.h | 3 ++-
 kernel/resource.c      | 1 +
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index f6bb2ca8e3b..32e4b2f7229 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -143,7 +143,8 @@ static inline unsigned long resource_type(struct resource *res)
 
 extern struct resource * __request_region(struct resource *,
 					resource_size_t start,
-					resource_size_t n, const char *name, int relaxed);
+					resource_size_t n,
+					const char *name, int flags);
 
 /* Compatibility cruft */
 #define release_region(start,n)	__release_region(&ioport_resource, (start), (n))
diff --git a/kernel/resource.c b/kernel/resource.c
index ca6a1536b20..fd5d7d574bb 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -620,6 +620,7 @@ resource_size_t resource_alignment(struct resource *res)
  * @start: resource start address
  * @n: resource region size
  * @name: reserving caller's ID string
+ * @flags: IO resource flags
  */
 struct resource * __request_region(struct resource *parent,
 				   resource_size_t start, resource_size_t n,
-- 
GitLab


From 71038f527f3665f562cf9afe083df729958a099b Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@suse.cz>
Date: Thu, 15 Jan 2009 13:51:02 -0800
Subject: [PATCH 463/492] MAINTAINERS: add entry for freezer

Now that people are using freezer for non-suspend/hibernation stuff, it
should have separate maintainers entry so that it is easier to find.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 73548f8ad0b..3fe4dc2c256 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1821,6 +1821,14 @@ M:	hch@infradead.org
 W:	ftp://ftp.openlinux.org/pub/people/hch/vxfs
 S:	Maintained
 
+FREEZER
+P:	Pavel Machek
+M:	pavel@suse.cz
+P:	Rafael J. Wysocki
+M:	rjw@sisk.pl
+L:	linux-pm@lists.linux-foundation.org
+S:	Supported
+
 FTRACE
 P:	Steven Rostedt
 M:	rostedt@goodmis.org
-- 
GitLab


From 1bcbf31337391a2f54ef6c1e8871c2de5944a7dc Mon Sep 17 00:00:00 2001
From: Qinghuang Feng <qhfeng.kernel@gmail.com>
Date: Thu, 15 Jan 2009 13:51:03 -0800
Subject: [PATCH 464/492] btrfs & squashfs: Move btrfs and squashfsto's magic
 number to <linux/magic.h>

Use the standard magic.h for btrfs and squashfs.

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Phillip Lougher <phillip@lougher.demon.co.uk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/btrfs/super.c          | 2 +-
 fs/squashfs/squashfs_fs.h | 1 -
 fs/squashfs/super.c       | 1 +
 include/linux/magic.h     | 2 ++
 4 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 0a14b495532..7256cf242eb 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -38,6 +38,7 @@
 #include <linux/namei.h>
 #include <linux/miscdevice.h>
 #include <linux/version.h>
+#include <linux/magic.h>
 #include "compat.h"
 #include "ctree.h"
 #include "disk-io.h"
@@ -51,7 +52,6 @@
 #include "export.h"
 #include "compression.h"
 
-#define BTRFS_SUPER_MAGIC 0x9123683E
 
 static struct super_operations btrfs_super_ops;
 
diff --git a/fs/squashfs/squashfs_fs.h b/fs/squashfs/squashfs_fs.h
index 6840da1bf21..283daafc568 100644
--- a/fs/squashfs/squashfs_fs.h
+++ b/fs/squashfs/squashfs_fs.h
@@ -26,7 +26,6 @@
 #define SQUASHFS_CACHED_FRAGMENTS	CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE
 #define SQUASHFS_MAJOR			4
 #define SQUASHFS_MINOR			0
-#define SQUASHFS_MAGIC			0x73717368
 #define SQUASHFS_START			0
 
 /* size of metadata (inode and directory) blocks */
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index a0466d7467b..071df5b5b49 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -35,6 +35,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/zlib.h>
+#include <linux/magic.h>
 
 #include "squashfs_fs.h"
 #include "squashfs_fs_sb.h"
diff --git a/include/linux/magic.h b/include/linux/magic.h
index 439f6f3cb0c..0b4df7eba85 100644
--- a/include/linux/magic.h
+++ b/include/linux/magic.h
@@ -10,11 +10,13 @@
 #define SYSFS_MAGIC		0x62656572
 #define SECURITYFS_MAGIC	0x73636673
 #define TMPFS_MAGIC		0x01021994
+#define SQUASHFS_MAGIC		0x73717368
 #define EFS_SUPER_MAGIC		0x414A53
 #define EXT2_SUPER_MAGIC	0xEF53
 #define EXT3_SUPER_MAGIC	0xEF53
 #define XENFS_SUPER_MAGIC	0xabba1974
 #define EXT4_SUPER_MAGIC	0xEF53
+#define BTRFS_SUPER_MAGIC	0x9123683E
 #define HPFS_SUPER_MAGIC	0xf995e849
 #define ISOFS_SUPER_MAGIC	0x9660
 #define JFFS2_SUPER_MAGIC	0x72b6
-- 
GitLab


From c91192d66d6cea7878b8542c9d9f1873971aba92 Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@suse.cz>
Date: Thu, 15 Jan 2009 13:51:03 -0800
Subject: [PATCH 465/492] nbd: do not allow two clients at the same time

Two nbd-clients at same time are bad idea, and cause WARN_ON from nbd in
2.6.28-rc7 from sysfs_add_one.  This simply prevents that from happening.

To reproduce:

 cat /dev/zero | head -c 10000000 > /tmp/delme.fstest.fs
 nbd-server 9100 -l /anyone.can.connect > /tmp/delme.fstest.fs &
 sleep 1
 nbd-client localhost 9100 /dev/nd0 &
 nbd-client localhost 9100 /dev/nd0 &

Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/block/nbd.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 7bcc1d8bc96..34f80fa6fed 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -406,6 +406,7 @@ static int nbd_do_it(struct nbd_device *lo)
 	ret = sysfs_create_file(&disk_to_dev(lo->disk)->kobj, &pid_attr.attr);
 	if (ret) {
 		printk(KERN_ERR "nbd: sysfs_create_file failed!");
+		lo->pid = 0;
 		return ret;
 	}
 
@@ -413,6 +414,7 @@ static int nbd_do_it(struct nbd_device *lo)
 		nbd_end_request(req);
 
 	sysfs_remove_file(&disk_to_dev(lo->disk)->kobj, &pid_attr.attr);
+	lo->pid = 0;
 	return 0;
 }
 
@@ -648,6 +650,8 @@ static int nbd_ioctl(struct block_device *bdev, fmode_t mode,
 		set_capacity(lo->disk, lo->bytesize >> 9);
 		return 0;
 	case NBD_DO_IT:
+		if (lo->pid)
+			return -EBUSY;
 		if (!lo->file)
 			return -EINVAL;
 		thread = kthread_create(nbd_thread, lo, lo->disk->disk_name);
-- 
GitLab


From a27506459c5e6ccc8437fca0adb6d3759c883c28 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Thu, 15 Jan 2009 13:51:04 -0800
Subject: [PATCH 466/492] checkpatch: handle missing #if open in context

If the #if opening statement is not in the context then the context stack
can be empty.  Handle this by ensuring there is always a blank entry in
the stack.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Tested-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 7bed4ed2c51..eefef65fa58 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -411,13 +411,15 @@ sub ctx_statement_block {
 
 	my $type = '';
 	my $level = 0;
-	my @stack = ([$type, $level]);
+	my @stack = ();
 	my $p;
 	my $c;
 	my $len = 0;
 
 	my $remainder;
 	while (1) {
+		@stack = (['', 0]) if ($#stack == -1);
+
 		#warn "CSB: blk<$blk> remain<$remain>\n";
 		# If we are about to drop off the end, pull in more
 		# context.
-- 
GitLab


From f9a0b3d17a01fe1ba24ce1e9c18666a52052e011 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Thu, 15 Jan 2009 13:51:05 -0800
Subject: [PATCH 467/492] checkpatch: type/cast spacing should not check prefix
 spacing

We should not be complaining about the prefix spacing for types and casts.
 We are triggering here because the check for spacing between '*'s is
overly loose.  Tighten this up.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index eefef65fa58..1d7924ad3a3 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -1665,7 +1665,7 @@ sub process {
 			# Should not end with a space.
 			$to =~ s/\s+$//;
 			# '*'s should not have spaces between.
-			while ($to =~ s/(.)\s\*/$1\*/) {
+			while ($to =~ s/\*\s+\*/\*\*/) {
 			}
 
 			#print "from<$from> to<$to>\n";
@@ -1680,7 +1680,7 @@ sub process {
 			# Should not end with a space.
 			$to =~ s/\s+$//;
 			# '*'s should not have spaces between.
-			while ($to =~ s/(.)\s\*/$1\*/) {
+			while ($to =~ s/\*\s+\*/\*\*/) {
 			}
 			# Modifiers should have spaces.
 			$to =~ s/(\b$Modifier$)/$1 /;
-- 
GitLab


From 63f17f8973ccdb8260e59ce5b1b4e2b2ee0401f0 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Thu, 15 Jan 2009 13:51:06 -0800
Subject: [PATCH 468/492] checkpatch: allow parentheses on return handle array
 values

When we allow return to have surrounding parentheses when containing
comparison operators we are not correctly handling the case where the
values contain array sufffixes.  Squash them.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 1d7924ad3a3..696196e194f 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2016,7 +2016,11 @@ sub process {
 
 			# Flatten any parentheses
 			$value =~ s/\)\(/\) \(/g;
-			while ($value !~ /(?:$Ident|-?$Constant)\s*$Compare\s*(?:$Ident|-?$Constant)/ && $value =~ s/\([^\(\)]*\)/1/) {
+			while ($value =~ s/\[[^\{\}]*\]/1/ ||
+			       $value !~ /(?:$Ident|-?$Constant)\s*
+					     $Compare\s*
+					     (?:$Ident|-?$Constant)/x &&
+			       $value =~ s/\([^\(\)]*\)/1/) {
 			}
 
 			if ($value =~ /^(?:$Ident|-?$Constant)$/) {
-- 
GitLab


From 39667782362becd5527e48d6c976a9f9985b95e6 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Thu, 15 Jan 2009 13:51:06 -0800
Subject: [PATCH 469/492] checkpatch: if should not continue a preceeding brace

We should not be continuing a braced section with an if, for example:

	if (...) {
	} if (...) {
	}

Detect this and suggest adding a newline.

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 696196e194f..5ea55e330c2 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2108,6 +2108,11 @@ sub process {
 				ERROR("trailing statements should be on next line\n" . $herecurr);
 			}
 		}
+# if should not continue a brace
+		if ($line =~ /}\s*if\b/) {
+			ERROR("trailing statements should be on next line\n" .
+				$herecurr);
+		}
 # case and default should not have general statements after them
 		if ($line =~ /^.\s*(?:case\s*.*|default\s*):/g &&
 		    $line !~ /\G(?:
-- 
GitLab


From 6903ffb2257266472ef2edd0092d526ae2dc00f7 Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Thu, 15 Jan 2009 13:51:07 -0800
Subject: [PATCH 470/492] checkpatch: struct seq_operations should normally be
 const

In the general use case struct seq_operations should be a const object.
Check for and warn where it is not.

Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 5ea55e330c2..447435c33dd 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -2527,9 +2527,10 @@ sub process {
 			WARN("please use device_initcall() instead of __initcall()\n" . $herecurr);
 		}
 # check for struct file_operations, ensure they are const.
-		if ($line =~ /\bstruct\s+file_operations\b/ &&
-		    $line !~ /\bconst\b/) {
-			WARN("struct file_operations should normally be const\n" . $herecurr);
+		if ($line !~ /\bconst\b/ &&
+		    $line =~ /\bstruct\s+(file_operations|seq_operations)\b/) {
+			WARN("struct $1 should normally be const\n" .
+				$herecurr);
 		}
 
 # use of NR_CPUS is usually wrong
-- 
GitLab


From db92a6502d4e8cb885e85e862b24ba5c07036fbf Mon Sep 17 00:00:00 2001
From: Andy Whitcroft <apw@canonical.com>
Date: Thu, 15 Jan 2009 13:51:07 -0800
Subject: [PATCH 471/492] checkpatch: version: 0.27

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 scripts/checkpatch.pl | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 447435c33dd..45eb0ae98eb 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -10,7 +10,7 @@ use strict;
 my $P = $0;
 $P =~ s@.*/@@g;
 
-my $V = '0.26';
+my $V = '0.27';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
-- 
GitLab


From c3d6362b8717759de7f2086f9665a4d96cacbc51 Mon Sep 17 00:00:00 2001
From: Alex Murray <murray.alex@gmail.com>
Date: Thu, 15 Jan 2009 13:51:08 -0800
Subject: [PATCH 472/492] hwmon: applesmc: fix light sensor readings on newer
 MacBooks

The light sensors ALV0 and ALV1 on newer MacBooks (early 2008 and later)
changed to report 10 bytes instead the earlier 6, and the sensor encoding
subsequently changed.  As a result, the reported light sensors readings
are much too low.

Via experiments leading up to this patch, it seems only the ALV0 is
reporting data, and the most useful value therein is a 10-bit big-endian
value at offset 6.  This suggests that a new protocol was added as a
backward-compatible replacement on top of the old one.

This patch makes applesmc report the improved light sensor reading for the
new machines, on a scale in conformance with earlier ones.

Signed-off-by: Alex Murray <murray.alex@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Cc: Nicolas Boichat <nicolas@boichat.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/hwmon/applesmc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index dca47a591ba..e3018623658 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -590,6 +590,11 @@ static ssize_t applesmc_light_show(struct device *dev,
 	}
 
 	ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, buffer, data_length);
+	/* newer macbooks report a single 10-bit bigendian value */
+	if (data_length == 10) {
+		left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2;
+		goto out;
+	}
 	left = buffer[2];
 	if (ret)
 		goto out;
-- 
GitLab


From bd112db872c2f69993c86f458467acb4a14da010 Mon Sep 17 00:00:00 2001
From: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Date: Thu, 15 Jan 2009 13:51:11 -0800
Subject: [PATCH 473/492] memcg: fix mem_cgroup_get_reclaim_stat_from_page

In case of swapin, a new page is added to lru before it is charged,
so page->pc->mem_cgroup points to NULL or last mem_cgroup the page
was charged before.

In the latter case, if the mem_cgroup has already freed by rmdir,
the area pointed to by page->pc->mem_cgroup may have invalid data.

Actually, I saw general protection fault.

    general protection fault: 0000 [#1] SMP
    last sysfs file: /sys/devices/system/cpu/cpu15/cache/index1/shared_cpu_map
    CPU 4
    Modules linked in: ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp ipv6 autofs4 hidp rfcomm l2cap bluetooth sunrpc dm_mirror dm_region_hash dm_log dm_multipath dm_mod rfkill input_polldev sbs sbshc battery ac lp sg ide_cd_mod cdrom button serio_raw acpi_memhotplug parport_pc e1000 rtc_cmos parport rtc_core rtc_lib i2c_i801 i2c_core shpchp pcspkr ata_piix libata megaraid_mbox megaraid_mm sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd [last unloaded: microcode]
    Pid: 26038, comm: page01 Tainted: G        W  2.6.28-rc9-mm1-mmotm-2008-12-22-16-14-f2ab3dea #1
    RIP: 0010:[<ffffffff8028e710>]  [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42
    RSP: 0000:ffff8801ee457da8  EFLAGS: 00010002
    RAX: 32353438312021c8 RBX: 0000000000000000 RCX: 32353438312021c8
    RDX: 0000000000000000 RSI: ffff8800cb0b1000 RDI: ffff8801164d1d28
    RBP: ffff880110002cb8 R08: ffff88010f2eae23 R09: 0000000000000001
    R10: ffff8800bc514b00 R11: ffff880110002c00 R12: 0000000000000000
    R13: ffff88000f484100 R14: 0000000000000003 R15: 00000000001200d2
    FS:  00007f8a261726f0(0000) GS:ffff88010f2eaa80(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: 00007f8a25d22000 CR3: 00000001ef18c000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process page01 (pid: 26038, threadinfo ffff8801ee456000, task ffff8800b585b960)
    Stack:
     ffffe200071ee568 ffff880110001f00 0000000000000000 ffffffff8028ea17
     ffff88000f484100 0000000000000000 0000000000000020 00007f8a25d22000
     ffff8800bc514b00 ffffffff8028ec34 0000000000000000 0000000000016fd8
    Call Trace:
     [<ffffffff8028ea17>] ? ____pagevec_lru_add+0xc1/0x13c
     [<ffffffff8028ec34>] ? drain_cpu_pagevecs+0x36/0x89
     [<ffffffff802a4f8c>] ? swapin_readahead+0x78/0x98
     [<ffffffff8029a37a>] ? handle_mm_fault+0x3d9/0x741
     [<ffffffff804da654>] ? do_page_fault+0x3ce/0x78c
     [<ffffffff804d7a42>] ? trace_hardirqs_off_thunk+0x3a/0x3c
     [<ffffffff804d860f>] ? page_fault+0x1f/0x30
    Code: cc 55 48 8d af b8 0d 00 00 48 89 f7 53 89 d3 e8 39 85 02 00 48 63 d3 48 ff 44 d5 10 45 85 e4 74 05 48 ff 44 d5 00 48 85 c0 74 0e <48> ff 44 d0 10 45 85 e4 74 04 48 ff 04 d0 5b 5d 41 5c c3 41 54
    RIP  [<ffffffff8028e710>] update_page_reclaim_stat+0x2f/0x42
     RSP <ffff8801ee457da8>

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e2996b80601..b6651277116 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -358,6 +358,10 @@ void mem_cgroup_rotate_lru_list(struct page *page, enum lru_list lru)
 		return;
 
 	pc = lookup_page_cgroup(page);
+	/*
+	 * Used bit is set without atomic ops but after smp_wmb().
+	 * For making pc->mem_cgroup visible, insert smp_rmb() here.
+	 */
 	smp_rmb();
 	/* unused page is not rotated. */
 	if (!PageCgroupUsed(pc))
@@ -374,7 +378,10 @@ void mem_cgroup_add_lru_list(struct page *page, enum lru_list lru)
 	if (mem_cgroup_disabled())
 		return;
 	pc = lookup_page_cgroup(page);
-	/* barrier to sync with "charge" */
+	/*
+	 * Used bit is set without atomic ops but after smp_wmb().
+	 * For making pc->mem_cgroup visible, insert smp_rmb() here.
+	 */
 	smp_rmb();
 	if (!PageCgroupUsed(pc))
 		return;
@@ -559,6 +566,14 @@ mem_cgroup_get_reclaim_stat_from_page(struct page *page)
 		return NULL;
 
 	pc = lookup_page_cgroup(page);
+	/*
+	 * Used bit is set without atomic ops but after smp_wmb().
+	 * For making pc->mem_cgroup visible, insert smp_rmb() here.
+	 */
+	smp_rmb();
+	if (!PageCgroupUsed(pc))
+		return NULL;
+
 	mz = page_cgroup_zoneinfo(pc);
 	if (!mz)
 		return NULL;
-- 
GitLab


From 40d58138f832a48208cdce57d6572a033b1f7a23 Mon Sep 17 00:00:00 2001
From: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Date: Thu, 15 Jan 2009 13:51:12 -0800
Subject: [PATCH 474/492] memcg: fix error path of mem_cgroup_move_parent

There is a bug in error path of mem_cgroup_move_parent.

Extra refcnt got from try_charge should be dropped, and usages incremented
by try_charge should be decremented in both error paths:

    A: failure at get_page_unless_zero
    B: failure at isolate_lru_page

This bug makes this parent directory unremovable.

In case of A, rmdir doesn't return, because res.usage doesn't go down to 0
at mem_cgroup_force_empty even after all the pc in lru are removed.

In case of B, rmdir fails and returns -EBUSY, because it has extra ref
counts even after res.usage goes down to 0.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 23 +++++++++++++++--------
 1 file changed, 15 insertions(+), 8 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index b6651277116..7be9b35d7ff 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -994,14 +994,15 @@ static int mem_cgroup_move_account(struct page_cgroup *pc,
 	if (pc->mem_cgroup != from)
 		goto out;
 
-	css_put(&from->css);
 	res_counter_uncharge(&from->res, PAGE_SIZE);
 	mem_cgroup_charge_statistics(from, pc, false);
 	if (do_swap_account)
 		res_counter_uncharge(&from->memsw, PAGE_SIZE);
+	css_put(&from->css);
+
+	css_get(&to->css);
 	pc->mem_cgroup = to;
 	mem_cgroup_charge_statistics(to, pc, true);
-	css_get(&to->css);
 	ret = 0;
 out:
 	unlock_page_cgroup(pc);
@@ -1034,8 +1035,10 @@ static int mem_cgroup_move_parent(struct page_cgroup *pc,
 	if (ret || !parent)
 		return ret;
 
-	if (!get_page_unless_zero(page))
-		return -EBUSY;
+	if (!get_page_unless_zero(page)) {
+		ret = -EBUSY;
+		goto uncharge;
+	}
 
 	ret = isolate_lru_page(page);
 
@@ -1044,19 +1047,23 @@ static int mem_cgroup_move_parent(struct page_cgroup *pc,
 
 	ret = mem_cgroup_move_account(pc, child, parent);
 
-	/* drop extra refcnt by try_charge() (move_account increment one) */
-	css_put(&parent->css);
 	putback_lru_page(page);
 	if (!ret) {
 		put_page(page);
+		/* drop extra refcnt by try_charge() */
+		css_put(&parent->css);
 		return 0;
 	}
-	/* uncharge if move fails */
+
 cancel:
+	put_page(page);
+uncharge:
+	/* drop extra refcnt by try_charge() */
+	css_put(&parent->css);
+	/* uncharge if move fails */
 	res_counter_uncharge(&parent->res, PAGE_SIZE);
 	if (do_swap_account)
 		res_counter_uncharge(&parent->memsw, PAGE_SIZE);
-	put_page(page);
 	return ret;
 }
 
-- 
GitLab


From c268e9946d7dc30ac4e55cdc3f43c8af1ae8153c Mon Sep 17 00:00:00 2001
From: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Date: Thu, 15 Jan 2009 13:51:13 -0800
Subject: [PATCH 475/492] memcg: fix hierarchical reclaim

If root_mem has no children, last_scaned_child is set to root_mem itself.
But after some children added to root_mem, mem_cgroup_get_next_node can
mem_cgroup_put the root_mem although root_mem has not been mem_cgroup_get.

This patch fixes this behavior by:

- Set last_scanned_child to NULL if root_mem has no children or DFS
  search has returned to root_mem itself(root_mem is not a "child" of
  root_mem).  Make mem_cgroup_get_first_node return root_mem in this case.
   There are no mem_cgroup_get/put for root_mem.

- Rename mem_cgroup_get_next_node to __mem_cgroup_get_next_node, and
  mem_cgroup_get_first_node to mem_cgroup_get_next_node.  Make
  mem_cgroup_hierarchical_reclaim call only new mem_cgroup_get_next_node.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 68 ++++++++++++++++++++++++++-----------------------
 1 file changed, 36 insertions(+), 32 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 7be9b35d7ff..322625f551c 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -633,7 +633,7 @@ unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
  * called with hierarchy_mutex held
  */
 static struct mem_cgroup *
-mem_cgroup_get_next_node(struct mem_cgroup *curr, struct mem_cgroup *root_mem)
+__mem_cgroup_get_next_node(struct mem_cgroup *curr, struct mem_cgroup *root_mem)
 {
 	struct cgroup *cgroup, *curr_cgroup, *root_cgroup;
 
@@ -644,19 +644,16 @@ mem_cgroup_get_next_node(struct mem_cgroup *curr, struct mem_cgroup *root_mem)
 		/*
 		 * Walk down to children
 		 */
-		mem_cgroup_put(curr);
 		cgroup = list_entry(curr_cgroup->children.next,
 						struct cgroup, sibling);
 		curr = mem_cgroup_from_cont(cgroup);
-		mem_cgroup_get(curr);
 		goto done;
 	}
 
 visit_parent:
 	if (curr_cgroup == root_cgroup) {
-		mem_cgroup_put(curr);
-		curr = root_mem;
-		mem_cgroup_get(curr);
+		/* caller handles NULL case */
+		curr = NULL;
 		goto done;
 	}
 
@@ -664,11 +661,9 @@ visit_parent:
 	 * Goto next sibling
 	 */
 	if (curr_cgroup->sibling.next != &curr_cgroup->parent->children) {
-		mem_cgroup_put(curr);
 		cgroup = list_entry(curr_cgroup->sibling.next, struct cgroup,
 						sibling);
 		curr = mem_cgroup_from_cont(cgroup);
-		mem_cgroup_get(curr);
 		goto done;
 	}
 
@@ -679,7 +674,6 @@ visit_parent:
 	goto visit_parent;
 
 done:
-	root_mem->last_scanned_child = curr;
 	return curr;
 }
 
@@ -689,40 +683,46 @@ done:
  * that to reclaim free pages from.
  */
 static struct mem_cgroup *
-mem_cgroup_get_first_node(struct mem_cgroup *root_mem)
+mem_cgroup_get_next_node(struct mem_cgroup *root_mem)
 {
 	struct cgroup *cgroup;
-	struct mem_cgroup *ret;
+	struct mem_cgroup *orig, *next;
 	bool obsolete;
 
-	obsolete = mem_cgroup_is_obsolete(root_mem->last_scanned_child);
-
 	/*
 	 * Scan all children under the mem_cgroup mem
 	 */
 	mutex_lock(&mem_cgroup_subsys.hierarchy_mutex);
+
+	orig = root_mem->last_scanned_child;
+	obsolete = mem_cgroup_is_obsolete(orig);
+
 	if (list_empty(&root_mem->css.cgroup->children)) {
-		ret = root_mem;
+		/*
+		 * root_mem might have children before and last_scanned_child
+		 * may point to one of them. We put it later.
+		 */
+		if (orig)
+			VM_BUG_ON(!obsolete);
+		next = NULL;
 		goto done;
 	}
 
-	if (!root_mem->last_scanned_child || obsolete) {
-
-		if (obsolete && root_mem->last_scanned_child)
-			mem_cgroup_put(root_mem->last_scanned_child);
-
+	if (!orig || obsolete) {
 		cgroup = list_first_entry(&root_mem->css.cgroup->children,
 				struct cgroup, sibling);
-		ret = mem_cgroup_from_cont(cgroup);
-		mem_cgroup_get(ret);
+		next = mem_cgroup_from_cont(cgroup);
 	} else
-		ret = mem_cgroup_get_next_node(root_mem->last_scanned_child,
-						root_mem);
+		next = __mem_cgroup_get_next_node(orig, root_mem);
 
 done:
-	root_mem->last_scanned_child = ret;
+	if (next)
+		mem_cgroup_get(next);
+	root_mem->last_scanned_child = next;
+	if (orig)
+		mem_cgroup_put(orig);
 	mutex_unlock(&mem_cgroup_subsys.hierarchy_mutex);
-	return ret;
+	return (next) ? next : root_mem;
 }
 
 static bool mem_cgroup_check_under_limit(struct mem_cgroup *mem)
@@ -780,21 +780,18 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
 	if (!root_mem->use_hierarchy)
 		return ret;
 
-	next_mem = mem_cgroup_get_first_node(root_mem);
+	next_mem = mem_cgroup_get_next_node(root_mem);
 
 	while (next_mem != root_mem) {
 		if (mem_cgroup_is_obsolete(next_mem)) {
-			mem_cgroup_put(next_mem);
-			next_mem = mem_cgroup_get_first_node(root_mem);
+			next_mem = mem_cgroup_get_next_node(root_mem);
 			continue;
 		}
 		ret = try_to_free_mem_cgroup_pages(next_mem, gfp_mask, noswap,
 						   get_swappiness(next_mem));
 		if (mem_cgroup_check_under_limit(root_mem))
 			return 0;
-		mutex_lock(&mem_cgroup_subsys.hierarchy_mutex);
-		next_mem = mem_cgroup_get_next_node(next_mem, root_mem);
-		mutex_unlock(&mem_cgroup_subsys.hierarchy_mutex);
+		next_mem = mem_cgroup_get_next_node(root_mem);
 	}
 	return ret;
 }
@@ -2254,7 +2251,14 @@ static void mem_cgroup_pre_destroy(struct cgroup_subsys *ss,
 static void mem_cgroup_destroy(struct cgroup_subsys *ss,
 				struct cgroup *cont)
 {
-	mem_cgroup_put(mem_cgroup_from_cont(cont));
+	struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
+	struct mem_cgroup *last_scanned_child = mem->last_scanned_child;
+
+	if (last_scanned_child) {
+		VM_BUG_ON(!mem_cgroup_is_obsolete(last_scanned_child));
+		mem_cgroup_put(last_scanned_child);
+	}
+	mem_cgroup_put(mem);
 }
 
 static int mem_cgroup_populate(struct cgroup_subsys *ss,
-- 
GitLab


From 4d1c627389c8ba6d9e703208567ffcdbd356f682 Mon Sep 17 00:00:00 2001
From: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Date: Thu, 15 Jan 2009 13:51:14 -0800
Subject: [PATCH 476/492] memcg: make oom less frequently

In previous implementation, mem_cgroup_try_charge checked the return
value of mem_cgroup_try_to_free_pages, and just retried if some pages
had been reclaimed.
But now, try_charge(and mem_cgroup_hierarchical_reclaim called from it)
only checks whether the usage is less than the limit.

This patch tries to change the behavior as before to cause oom less
frequently.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 322625f551c..fb62b4335fa 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -773,10 +773,10 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
 	 * but there might be left over accounting, even after children
 	 * have left.
 	 */
-	ret = try_to_free_mem_cgroup_pages(root_mem, gfp_mask, noswap,
+	ret += try_to_free_mem_cgroup_pages(root_mem, gfp_mask, noswap,
 					   get_swappiness(root_mem));
 	if (mem_cgroup_check_under_limit(root_mem))
-		return 0;
+		return 1;	/* indicate reclaim has succeeded */
 	if (!root_mem->use_hierarchy)
 		return ret;
 
@@ -787,10 +787,10 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
 			next_mem = mem_cgroup_get_next_node(root_mem);
 			continue;
 		}
-		ret = try_to_free_mem_cgroup_pages(next_mem, gfp_mask, noswap,
+		ret += try_to_free_mem_cgroup_pages(next_mem, gfp_mask, noswap,
 						   get_swappiness(next_mem));
 		if (mem_cgroup_check_under_limit(root_mem))
-			return 0;
+			return 1;	/* indicate reclaim has succeeded */
 		next_mem = mem_cgroup_get_next_node(root_mem);
 	}
 	return ret;
@@ -875,6 +875,8 @@ static int __mem_cgroup_try_charge(struct mm_struct *mm,
 
 		ret = mem_cgroup_hierarchical_reclaim(mem_over_limit, gfp_mask,
 							noswap);
+		if (ret)
+			continue;
 
 		/*
 		 * try_to_free_mem_cgroup_pages() might not give us a full
-- 
GitLab


From 46666d8ac42893f90edde7e57a11bc8749d7e89c Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 15 Jan 2009 13:51:15 -0800
Subject: [PATCH 477/492] revert "mm: vmalloc use mutex for purge"

Revert commit e97a630eb0f5b8b380fd67504de6cedebb489003 ("mm: vmalloc use
mutex for purge")

Bryan Donlan reports:

: After testing 2.6.29-rc1 on xen-x86 with a btrfs root filesystem, I
: got the OOPS quoted below and a hard freeze shortly after boot.
: Boot messages and config are attached.
:
: ------------[ cut here ]------------
: Kernel BUG at c05ef80d [verbose debug info unavailable]
: invalid opcode: 0000 [#1] SMP
: last sysfs file: /sys/block/xvdc/size
: Modules linked in:
:
: Pid: 0, comm: swapper Not tainted (2.6.29-rc1 #6)
: EIP: 0061:[<c05ef80d>] EFLAGS: 00010087 CPU: 2
: EIP is at schedule+0x7cd/0x950
: EAX: d5aeca80 EBX: 00000002 ECX: 00000000 EDX: d4cb9a40
: ESI: c12f5600 EDI: d4cb9a40 EBP: d6033fa4 ESP: d6033ef4
:  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
: Process swapper (pid: 0, ti=d6032000 task=d6020b70 task.ti=d6032000)
: Stack:
:  000d85bc 00000000 000186a0 00000000 0dd11410 c0105417 c12efe00 0dc367c3
:  00000011 c0105d46 d5a5d310 deadbeef d4cb9a40 c07cc600 c05f1340 c12e0060
:  deadbeef d6020b70 d6020d08 00000002 c014377d 00000000 c12f5600 00002c22
: Call Trace:
:  [<c0105417>] xen_force_evtchn_callback+0x17/0x30
:  [<c0105d46>] check_events+0x8/0x12
:  [<c05f1340>] _spin_unlock_irqrestore+0x20/0x40
:  [<c014377d>] hrtimer_start_range_ns+0x12d/0x2e0
:  [<c014c4f6>] tick_nohz_restart_sched_tick+0x146/0x160
:  [<c0107485>] cpu_idle+0xa5/0xc0

and bisected it to this commit.

Let's remove it now while we have a think about the problem.

Reported-by: Bryan Donlan <bdonlan@gmail.com>
Tested-by: Christophe Saout <christophe@saout.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/vmalloc.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 7e00b280648..75f49d312e8 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -14,7 +14,6 @@
 #include <linux/highmem.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
-#include <linux/mutex.h>
 #include <linux/interrupt.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
@@ -496,7 +495,7 @@ static atomic_t vmap_lazy_nr = ATOMIC_INIT(0);
 static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end,
 					int sync, int force_flush)
 {
-	static DEFINE_MUTEX(purge_lock);
+	static DEFINE_SPINLOCK(purge_lock);
 	LIST_HEAD(valist);
 	struct vmap_area *va;
 	int nr = 0;
@@ -507,10 +506,10 @@ static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end,
 	 * the case that isn't actually used at the moment anyway.
 	 */
 	if (!sync && !force_flush) {
-		if (!mutex_trylock(&purge_lock))
+		if (!spin_trylock(&purge_lock))
 			return;
 	} else
-		mutex_lock(&purge_lock);
+		spin_lock(&purge_lock);
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(va, &vmap_area_list, list) {
@@ -542,7 +541,7 @@ static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end,
 			__free_vmap_area(va);
 		spin_unlock(&vmap_area_lock);
 	}
-	mutex_unlock(&purge_lock);
+	spin_unlock(&purge_lock);
 }
 
 /*
-- 
GitLab


From 70b66cbfd3316b792a855cb9a2574e85f1a63d0f Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Thu, 15 Jan 2009 13:51:17 -0800
Subject: [PATCH 478/492] alpha: nautilus - fix compile failure with gcc-4.3

init_srm_irq() deals with irq's #16 and above, but size of irq_desc
array on nautilus and some other system types is 16. So gcc-4.3
complains that "array subscript is above array bounds", even though
this function is never called on those systems.

This adds a check for NR_IRQS <= 16, which effectively optimizes
init_srm_irq() code away on problematic platforms.

Thanks to Daniel Drake <dsd@gentoo.org> for detailed analysis
of the problem.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/irq_srm.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c
index 32212014fbe..a03fbca4940 100644
--- a/arch/alpha/kernel/irq_srm.c
+++ b/arch/alpha/kernel/irq_srm.c
@@ -63,6 +63,8 @@ init_srm_irqs(long max, unsigned long ignore_mask)
 {
 	long i;
 
+	if (NR_IRQS <= 16)
+		return;
 	for (i = 16; i < max; ++i) {
 		if (i < 64 && ((ignore_mask >> i) & 1))
 			continue;
-- 
GitLab


From 2f88d151cb8e73587983d7feccd70672ff6730fe Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Thu, 15 Jan 2009 13:51:18 -0800
Subject: [PATCH 479/492] alpha: nautilus - fix hang on boot

Recently introduced generic pci_common_swizzle() relies on bus->self
being NULL for the root PCI bus. But on nautilus bus->self points to
the host bridge device, which is necessary as we do a root bus sizing
on this system. As a result, pci_common_swizzle() loops infinitely.
This worked until 2.6.29-rc1 because the alpha-specific swizzle routine
checked for bus->parent == NULL (instead of bus->self).

Fixed by clearing bus->self after bus sizing is done.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/sys_nautilus.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/alpha/kernel/sys_nautilus.c b/arch/alpha/kernel/sys_nautilus.c
index a7f23b5ab81..99c0f46f6b9 100644
--- a/arch/alpha/kernel/sys_nautilus.c
+++ b/arch/alpha/kernel/sys_nautilus.c
@@ -245,6 +245,10 @@ nautilus_init_pci(void)
 		IRONGATE0->pci_mem = pci_mem;
 
 	pci_bus_assign_resources(bus);
+
+	/* pci_common_swizzle() relies on bus->self being NULL
+	   for the root bus, so just clear it. */
+	bus->self = NULL;
 	pci_fixup_irqs(alpha_mv.pci_swizzle, alpha_mv.pci_map_irq);
 }
 
-- 
GitLab


From 5f7dc5d75076fd1c1fc6bc09f2467509d20db24a Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Thu, 15 Jan 2009 13:51:19 -0800
Subject: [PATCH 480/492] alpha: fix RTC on marvel

Unlike other alphas, marvel doesn't have real PC-style CMOS clock hardware
- RTC accesses are emulated via PAL calls.  Unfortunately, for unknown
reason these calls work only on CPU #0.  So current implementation for
arbitrary CPU makes CMOS_READ/WRITE to be executed on CPU #0 via IPI.
However, for obvious reason this doesn't work with standard
get/set_rtc_time() functions, where a bunch of CMOS accesses is done with
disabled interrupts.

Solved by making the IPI calls for entire get/set_rtc_time() functions,
not for individual CMOS accesses.  Which is also a lot more effective
performance-wise.

The patch is largely based on the code from Jay Estabrook.
My changes:
- tweak asm-generic/rtc.h by adding a couple of #defines to
  avoid a massive code duplication in arch/alpha/include/asm/rtc.h;
- sys_marvel.c: fix get/set_rtc_time() return values (Jay's FIXMEs).

NOTE: this fixes *only* LIB_RTC drivers.  Legacy (CONFIG_RTC) driver
wont't work on marvel.  Actually I think that we should just disable
CONFIG_RTC on alpha (maybe in 2.6.30?), like most other arches - AFAIK,
all modern distributions use LIB_RTC anyway.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/machvec.h |  4 +++
 arch/alpha/include/asm/rtc.h     | 12 +++++--
 arch/alpha/kernel/core_marvel.c  | 10 +-----
 arch/alpha/kernel/machvec_impl.h |  5 ++-
 arch/alpha/kernel/proto.h        |  2 ++
 arch/alpha/kernel/sys_jensen.c   |  2 ++
 arch/alpha/kernel/sys_marvel.c   | 56 +++++++++++++++++++++++++++++++-
 arch/alpha/kernel/time.c         | 10 ++++++
 include/asm-generic/rtc.h        | 14 ++++++--
 9 files changed, 98 insertions(+), 17 deletions(-)

diff --git a/arch/alpha/include/asm/machvec.h b/arch/alpha/include/asm/machvec.h
index a86c083cdf7..fea4ea75b79 100644
--- a/arch/alpha/include/asm/machvec.h
+++ b/arch/alpha/include/asm/machvec.h
@@ -21,6 +21,7 @@ struct pci_dev;
 struct pci_ops;
 struct pci_controller;
 struct _alpha_agp_info;
+struct rtc_time;
 
 struct alpha_machine_vector
 {
@@ -94,6 +95,9 @@ struct alpha_machine_vector
 
 	struct _alpha_agp_info *(*agp_info)(void);
 
+	unsigned int (*rtc_get_time)(struct rtc_time *);
+	int (*rtc_set_time)(struct rtc_time *);
+
 	const char *vector_name;
 
 	/* NUMA information */
diff --git a/arch/alpha/include/asm/rtc.h b/arch/alpha/include/asm/rtc.h
index 4e854b1333e..1f7fba671ae 100644
--- a/arch/alpha/include/asm/rtc.h
+++ b/arch/alpha/include/asm/rtc.h
@@ -1,9 +1,15 @@
 #ifndef _ALPHA_RTC_H
 #define _ALPHA_RTC_H
 
-/*
- * Alpha uses the default access methods for the RTC.
- */
+#if defined(CONFIG_ALPHA_GENERIC)
+# define get_rtc_time		alpha_mv.rtc_get_time
+# define set_rtc_time		alpha_mv.rtc_set_time
+#else
+# if defined(CONFIG_ALPHA_MARVEL) && defined(CONFIG_SMP)
+#  define get_rtc_time		marvel_get_rtc_time
+#  define set_rtc_time		marvel_set_rtc_time
+# endif
+#endif
 
 #include <asm-generic/rtc.h>
 
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index 9cd8dca742a..e302daecbe5 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -658,16 +658,8 @@ __marvel_rtc_io(u8 b, unsigned long addr, int write)
 		rtc_access.data = bcd2bin(b);
 		rtc_access.function = 0x48 + !write;	/* GET/PUT_TOY */
 
-#ifdef CONFIG_SMP
-		if (smp_processor_id() != boot_cpuid)
-			smp_call_function_single(boot_cpuid,
-						 __marvel_access_rtc,
-						 &rtc_access, 1);
-		else
-			__marvel_access_rtc(&rtc_access);
-#else
 		__marvel_access_rtc(&rtc_access);
-#endif
+
 		ret = bin2bcd(rtc_access.data);
 		break;
 
diff --git a/arch/alpha/kernel/machvec_impl.h b/arch/alpha/kernel/machvec_impl.h
index 466c9dff818..512685f7809 100644
--- a/arch/alpha/kernel/machvec_impl.h
+++ b/arch/alpha/kernel/machvec_impl.h
@@ -40,7 +40,10 @@
 #define CAT1(x,y)  x##y
 #define CAT(x,y)   CAT1(x,y)
 
-#define DO_DEFAULT_RTC .rtc_port = 0x70
+#define DO_DEFAULT_RTC \
+	.rtc_port = 0x70, \
+	.rtc_get_time = common_get_rtc_time, \
+	.rtc_set_time = common_set_rtc_time
 
 #define DO_EV4_MMU							\
 	.max_asn =			EV4_MAX_ASN,			\
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 708d5ca8778..fe14c6747cd 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -145,6 +145,8 @@ extern void smp_percpu_timer_interrupt(struct pt_regs *);
 extern irqreturn_t timer_interrupt(int irq, void *dev);
 extern void common_init_rtc(void);
 extern unsigned long est_cycle_freq;
+extern unsigned int common_get_rtc_time(struct rtc_time *time);
+extern int common_set_rtc_time(struct rtc_time *time);
 
 /* smc37c93x.c */
 extern void SMC93x_Init(void);
diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c
index 2c3de97de46..e2516f9a896 100644
--- a/arch/alpha/kernel/sys_jensen.c
+++ b/arch/alpha/kernel/sys_jensen.c
@@ -261,6 +261,8 @@ struct alpha_machine_vector jensen_mv __initmv = {
 	.machine_check		= jensen_machine_check,
 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
 	.rtc_port		= 0x170,
+	.rtc_get_time		= common_get_rtc_time,
+	.rtc_set_time		= common_set_rtc_time,
 
 	.nr_irqs		= 16,
 	.device_interrupt	= jensen_device_interrupt,
diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c
index 828449cd263..c5a1a2438c6 100644
--- a/arch/alpha/kernel/sys_marvel.c
+++ b/arch/alpha/kernel/sys_marvel.c
@@ -23,6 +23,7 @@
 #include <asm/hwrpb.h>
 #include <asm/tlbflush.h>
 #include <asm/vga.h>
+#include <asm/rtc.h>
 
 #include "proto.h"
 #include "err_impl.h"
@@ -426,6 +427,57 @@ marvel_init_rtc(void)
 	init_rtc_irq();
 }
 
+struct marvel_rtc_time {
+	struct rtc_time *time;
+	int retval;
+};
+
+#ifdef CONFIG_SMP
+static void
+smp_get_rtc_time(void *data)
+{
+	struct marvel_rtc_time *mrt = data;
+	mrt->retval = __get_rtc_time(mrt->time);
+}
+
+static void
+smp_set_rtc_time(void *data)
+{
+	struct marvel_rtc_time *mrt = data;
+	mrt->retval = __set_rtc_time(mrt->time);
+}
+#endif
+
+static unsigned int
+marvel_get_rtc_time(struct rtc_time *time)
+{
+#ifdef CONFIG_SMP
+	struct marvel_rtc_time mrt;
+
+	if (smp_processor_id() != boot_cpuid) {
+		mrt.time = time;
+		smp_call_function_single(boot_cpuid, smp_get_rtc_time, &mrt, 1);
+		return mrt.retval;
+	}
+#endif
+	return __get_rtc_time(time);
+}
+
+static int
+marvel_set_rtc_time(struct rtc_time *time)
+{
+#ifdef CONFIG_SMP
+	struct marvel_rtc_time mrt;
+
+	if (smp_processor_id() != boot_cpuid) {
+		mrt.time = time;
+		smp_call_function_single(boot_cpuid, smp_set_rtc_time, &mrt, 1);
+		return mrt.retval;
+	}
+#endif
+	return __set_rtc_time(time);
+}
+
 static void
 marvel_smp_callin(void)
 {
@@ -466,7 +518,9 @@ marvel_smp_callin(void)
 struct alpha_machine_vector marvel_ev7_mv __initmv = {
 	.vector_name		= "MARVEL/EV7",
 	DO_EV7_MMU,
-	DO_DEFAULT_RTC,
+	.rtc_port		= 0x70,
+	.rtc_get_time		= marvel_get_rtc_time,
+	.rtc_set_time		= marvel_set_rtc_time,
 	DO_MARVEL_IO,
 	.machine_check		= marvel_machine_check,
 	.max_isa_dma_address	= ALPHA_MAX_ISA_DMA_ADDRESS,
diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
index e6a231435cb..b04e2cbf23a 100644
--- a/arch/alpha/kernel/time.c
+++ b/arch/alpha/kernel/time.c
@@ -46,6 +46,7 @@
 #include <asm/io.h>
 #include <asm/hwrpb.h>
 #include <asm/8253pit.h>
+#include <asm/rtc.h>
 
 #include <linux/mc146818rtc.h>
 #include <linux/time.h>
@@ -180,6 +181,15 @@ common_init_rtc(void)
 	init_rtc_irq();
 }
 
+unsigned int common_get_rtc_time(struct rtc_time *time)
+{
+	return __get_rtc_time(time);
+}
+
+int common_set_rtc_time(struct rtc_time *time)
+{
+	return __set_rtc_time(time);
+}
 
 /* Validate a computed cycle counter result against the known bounds for
    the given processor core.  There's too much brokenness in the way of
diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
index 89061c1a67d..763e3b060f4 100644
--- a/include/asm-generic/rtc.h
+++ b/include/asm-generic/rtc.h
@@ -42,7 +42,7 @@ static inline unsigned char rtc_is_updating(void)
 	return uip;
 }
 
-static inline unsigned int get_rtc_time(struct rtc_time *time)
+static inline unsigned int __get_rtc_time(struct rtc_time *time)
 {
 	unsigned char ctrl;
 	unsigned long flags;
@@ -108,8 +108,12 @@ static inline unsigned int get_rtc_time(struct rtc_time *time)
 	return RTC_24H;
 }
 
+#ifndef get_rtc_time
+#define get_rtc_time	__get_rtc_time
+#endif
+
 /* Set the current date and time in the real time clock. */
-static inline int set_rtc_time(struct rtc_time *time)
+static inline int __set_rtc_time(struct rtc_time *time)
 {
 	unsigned long flags;
 	unsigned char mon, day, hrs, min, sec;
@@ -190,11 +194,15 @@ static inline int set_rtc_time(struct rtc_time *time)
 	return 0;
 }
 
+#ifndef set_rtc_time
+#define set_rtc_time	__set_rtc_time
+#endif
+
 static inline unsigned int get_rtc_ss(void)
 {
 	struct rtc_time h;
 
-	get_rtc_time(&h);
+	__get_rtc_time(&h);
 	return h.tm_sec;
 }
 
-- 
GitLab


From 6946ce00c944131464d408c1e9b7b290d8bc3d15 Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Thu, 15 Jan 2009 13:51:20 -0800
Subject: [PATCH 481/492] alpha: .gitignore vmlinux.lds

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/kernel/.gitignore | 1 +
 1 file changed, 1 insertion(+)
 create mode 100644 arch/alpha/kernel/.gitignore

diff --git a/arch/alpha/kernel/.gitignore b/arch/alpha/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/alpha/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
-- 
GitLab


From 5da7f3d71e243ef5c464967581414d29c72bab75 Mon Sep 17 00:00:00 2001
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Date: Thu, 15 Jan 2009 13:51:20 -0800
Subject: [PATCH 482/492] alpha: make pte_alloc_one_kernel() inline

As it's just a single call to __get_free_page().

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/alpha/include/asm/pgalloc.h | 7 ++++++-
 arch/alpha/mm/init.c             | 7 -------
 2 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/arch/alpha/include/asm/pgalloc.h b/arch/alpha/include/asm/pgalloc.h
index fd090155dcc..bc2a0daf2d9 100644
--- a/arch/alpha/include/asm/pgalloc.h
+++ b/arch/alpha/include/asm/pgalloc.h
@@ -50,7 +50,12 @@ pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_page((unsigned long)pmd);
 }
 
-extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	return pte;
+}
 
 static inline void
 pte_free_kernel(struct mm_struct *mm, pte_t *pte)
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 234e42b8ee7..5d7a16eab31 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -59,13 +59,6 @@ pgd_alloc(struct mm_struct *mm)
 	return ret;
 }
 
-pte_t *
-pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
-	pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	return pte;
-}
-
 
 /*
  * BAD_PAGE is the page that is used for page faults when linux
-- 
GitLab


From 5b019e99016f3a692ba45bf68fba73a402d7c01a Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 15 Jan 2009 13:51:21 -0800
Subject: [PATCH 483/492] lib/idr.c: use kmem_cache_zalloc() for the idr_layer
 cache

David points out that the idr_remove_all() function returns unused slabs
to the kmem cache, but needs to zero them first or else they will be
uninitialized upon next use.  This causes crashes which have been observed
in the firewire subsystem.

He fixed this by zeroing the object before freeing it in idr_remove_all().

But we agree that simply removing the constructor and zeroing the object
at allocation time is simpler than relying upon slab constructor machinery
and might even be faster.

This problem was introduced by "idr: make idr_remove rcu-safe" (commit
cf481c20c476ad2c0febdace9ce23f5a4db19582), which was first released in
2.6.27.

There are no known codesites which trigger this bug in 2.6.27 or 2.6.28.
The post-2.6.28 firewire changes are the only known triggerer.

There might of course be not-yet-discovered triggerers in 2.6.27 and
2.6.28, and there might be out-of-tree triggerers which are added to those
kernel versions.  I'll let the -stable guys decide whether they want to
backport this fix.

Reported-by: David Moore <dcm@acm.org>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Paul E. McKenney <paulmck@us.ibm.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Kristian Hgsberg <krh@redhat.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 lib/idr.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/lib/idr.c b/lib/idr.c
index 6b7cfa6508f..c11c5765cde 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -121,7 +121,7 @@ int idr_pre_get(struct idr *idp, gfp_t gfp_mask)
 {
 	while (idp->id_free_cnt < IDR_FREE_MAX) {
 		struct idr_layer *new;
-		new = kmem_cache_alloc(idr_layer_cache, gfp_mask);
+		new = kmem_cache_zalloc(idr_layer_cache, gfp_mask);
 		if (new == NULL)
 			return (0);
 		move_to_free_list(idp, new);
@@ -623,16 +623,10 @@ void *idr_replace(struct idr *idp, void *ptr, int id)
 }
 EXPORT_SYMBOL(idr_replace);
 
-static void idr_cache_ctor(void *idr_layer)
-{
-	memset(idr_layer, 0, sizeof(struct idr_layer));
-}
-
 void __init idr_init_cache(void)
 {
 	idr_layer_cache = kmem_cache_create("idr_layer_cache",
-				sizeof(struct idr_layer), 0, SLAB_PANIC,
-				idr_cache_ctor);
+				sizeof(struct idr_layer), 0, SLAB_PANIC, NULL);
 }
 
 /**
-- 
GitLab


From 9e0c79782143a816ba7d7f0f6e195091a97053f6 Mon Sep 17 00:00:00 2001
From: Eric Piel <eric.piel@tremplin-utc.net>
Date: Thu, 15 Jan 2009 13:51:23 -0800
Subject: [PATCH 484/492] lis3lv02d: merge with leds hp disk

Move the second part of the HP laptop disk protection functionality (a red
led) to the same driver.  From a purely Linux developer's point of view,
the led and the accelerometer have nothing related.  However, they
correspond to the same ACPI functionality, and so will always be used
together, moreover as they share the same ACPI PNP alias, there is no
other simple to allow to have same loaded at the same time if they are not
in the same module.  Also make it requires the led class to compile and
update the Kconfig text.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/hwmon/Kconfig       |  14 +++-
 drivers/hwmon/hp_accel.c    |  43 ++++++++++-
 drivers/leds/Kconfig        |   7 --
 drivers/leds/Makefile       |   1 -
 drivers/leds/leds-hp-disk.c | 137 ------------------------------------
 5 files changed, 52 insertions(+), 150 deletions(-)
 delete mode 100644 drivers/leds/leds-hp-disk.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4b33bc82cc2..54b43bea5e4 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -861,6 +861,8 @@ config SENSORS_HDAPS
 config SENSORS_LIS3LV02D
 	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer"
 	depends on ACPI && INPUT
+	select NEW_LEDS
+	select LEDS_CLASS
 	default n
 	help
 	  This driver provides support for the LIS3LV02Dx accelerometer. In
@@ -872,10 +874,16 @@ config SENSORS_LIS3LV02D
 	  /sys/devices/platform/lis3lv02d.
 
 	  This driver also provides an absolute input class device, allowing
-	  the laptop to act as a pinball machine-esque joystick.
+	  the laptop to act as a pinball machine-esque joystick. On HP laptops,
+	  if the led infrastructure is activated, support for a led indicating
+	  disk protection will be provided as hp:red:hddprotection.
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called lis3lv02d.
+	  This driver can also be built as modules.  If so, the core module
+	  will be called lis3lv02d and a specific module for HP laptops will be
+	  called hp_accel.
+
+	  Say Y here if you have an applicable laptop and want to experience
+	  the awesome power of lis3lv02d.
 
 config SENSORS_APPLESMC
 	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index bf8d4058057..86a0f51d99d 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -36,6 +36,7 @@
 #include <linux/freezer.h>
 #include <linux/version.h>
 #include <linux/uaccess.h>
+#include <linux/leds.h>
 #include <acpi/acpi_drivers.h>
 #include <asm/atomic.h>
 #include "lis3lv02d.h"
@@ -154,10 +155,34 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
  */
 };
 
+static acpi_status hpled_acpi_write(acpi_handle handle, int reg)
+{
+	unsigned long long ret; /* Not used when writing */
+	union acpi_object in_obj[1];
+	struct acpi_object_list args = { 1, in_obj };
+
+	in_obj[0].type          = ACPI_TYPE_INTEGER;
+	in_obj[0].integer.value = reg;
+
+	return acpi_evaluate_integer(handle, "ALED", &args, &ret);
+}
+
+static void hpled_set(struct led_classdev *led_cdev,
+			       enum led_brightness value)
+{
+	hpled_acpi_write(adev.device->handle, !!value);
+}
+
+static struct led_classdev hpled_led = {
+	.name			= "hp:red:hddprotection",
+	.default_trigger	= "none",
+	.brightness_set		= hpled_set,
+};
 
 static int lis3lv02d_add(struct acpi_device *device)
 {
 	u8 val;
+	int ret;
 
 	if (!device)
 		return -EINVAL;
@@ -183,7 +208,17 @@ static int lis3lv02d_add(struct acpi_device *device)
 		adev.ac = lis3lv02d_axis_normal;
 	}
 
-	return lis3lv02d_init_device(&adev);
+	ret = led_classdev_register(NULL, &hpled_led);
+	if (ret)
+		return ret;
+
+	ret = lis3lv02d_init_device(&adev);
+	if (ret) {
+		led_classdev_unregister(&hpled_led);
+		return ret;
+	}
+
+	return ret;
 }
 
 static int lis3lv02d_remove(struct acpi_device *device, int type)
@@ -194,6 +229,8 @@ static int lis3lv02d_remove(struct acpi_device *device, int type)
 	lis3lv02d_joystick_disable();
 	lis3lv02d_poweroff(device->handle);
 
+	led_classdev_unregister(&hpled_led);
+
 	return lis3lv02d_remove_fs();
 }
 
@@ -203,6 +240,7 @@ static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state)
 {
 	/* make sure the device is off when we suspend */
 	lis3lv02d_poweroff(device->handle);
+	led_classdev_suspend(&hpled_led);
 	return 0;
 }
 
@@ -215,6 +253,7 @@ static int lis3lv02d_resume(struct acpi_device *device)
 	else
 		lis3lv02d_poweroff(device->handle);
 	mutex_unlock(&adev.lock);
+	led_classdev_resume(&hpled_led);
 	return 0;
 }
 #else
@@ -256,7 +295,7 @@ static void __exit lis3lv02d_exit_module(void)
 	acpi_bus_unregister_driver(&lis3lv02d_driver);
 }
 
-MODULE_DESCRIPTION("Glue between LIS3LV02Dx and HP ACPI BIOS");
+MODULE_DESCRIPTION("Glue between LIS3LV02Dx and HP ACPI BIOS and support for disk protection LED.");
 MODULE_AUTHOR("Yan Burman, Eric Piel, Pavel Machek");
 MODULE_LICENSE("GPL");
 
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index a4a1ae21463..742713611bc 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -119,13 +119,6 @@ config LEDS_GPIO
 	  outputs. To be useful the particular board must have LEDs
 	  and they must be connected to the GPIO lines.
 
-config LEDS_HP_DISK
-	tristate "LED Support for disk protection LED on HP notebooks"
-	depends on LEDS_CLASS && ACPI
-	help
-	  This option enable support for disk protection LED, found on
-	  newer HP notebooks.
-
 config LEDS_CLEVO_MAIL
 	tristate "Mail LED on Clevo notebook (EXPERIMENTAL)"
 	depends on LEDS_CLASS && X86 && SERIO_I8042 && DMI && EXPERIMENTAL
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index bc247cb02e8..9d76f0f160a 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
 obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
 obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
-obj-$(CONFIG_LEDS_HP_DISK)		+= leds-hp-disk.o
 obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
 
 # LED Triggers
diff --git a/drivers/leds/leds-hp-disk.c b/drivers/leds/leds-hp-disk.c
deleted file mode 100644
index d786adc8c5e..00000000000
--- a/drivers/leds/leds-hp-disk.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- *  leds-hp-disk.c - driver for HP "hard disk protection" LED
- *
- *  Copyright (C) 2008 Pavel Machek
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/kthread.h>
-#include <linux/leds.h>
-#include <acpi/acpi_drivers.h>
-
-#define DRIVER_NAME     "leds-hp-disk"
-#define ACPI_MDPS_CLASS "led"
-
-/* For automatic insertion of the module */
-static struct acpi_device_id hpled_device_ids[] = {
-	{"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
-	{"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, hpled_device_ids);
-
-struct acpi_hpled {
-	struct acpi_device	*device;   /* The ACPI device */
-};
-
-static struct acpi_hpled adev;
-
-static acpi_status hpled_acpi_write(acpi_handle handle, int reg)
-{
-	unsigned long long ret; /* Not used when writing */
-	union acpi_object in_obj[1];
-	struct acpi_object_list args = { 1, in_obj };
-
-	in_obj[0].type          = ACPI_TYPE_INTEGER;
-	in_obj[0].integer.value = reg;
-
-	return acpi_evaluate_integer(handle, "ALED", &args, &ret);
-}
-
-static void hpled_set(struct led_classdev *led_cdev,
-			       enum led_brightness value)
-{
-	hpled_acpi_write(adev.device->handle, !!value);
-}
-
-static struct led_classdev hpled_led = {
-	.name			= "hp:red:hddprotection",
-	.default_trigger	= "heartbeat",
-	.brightness_set		= hpled_set,
-	.flags			= LED_CORE_SUSPENDRESUME,
-};
-
-static int hpled_add(struct acpi_device *device)
-{
-	int ret;
-
-	if (!device)
-		return -EINVAL;
-
-	adev.device = device;
-	strcpy(acpi_device_name(device), DRIVER_NAME);
-	strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
-	device->driver_data = &adev;
-
-	ret = led_classdev_register(NULL, &hpled_led);
-	return ret;
-}
-
-static int hpled_remove(struct acpi_device *device, int type)
-{
-	if (!device)
-		return -EINVAL;
-
-	led_classdev_unregister(&hpled_led);
-	return 0;
-}
-
-
-
-static struct acpi_driver leds_hp_driver = {
-	.name  = DRIVER_NAME,
-	.class = ACPI_MDPS_CLASS,
-	.ids   = hpled_device_ids,
-	.ops = {
-		.add     = hpled_add,
-		.remove  = hpled_remove,
-	}
-};
-
-static int __init hpled_init_module(void)
-{
-	int ret;
-
-	if (acpi_disabled)
-		return -ENODEV;
-
-	ret = acpi_bus_register_driver(&leds_hp_driver);
-	if (ret < 0)
-		return ret;
-
-	printk(KERN_INFO DRIVER_NAME " driver loaded.\n");
-
-	return 0;
-}
-
-static void __exit hpled_exit_module(void)
-{
-	acpi_bus_unregister_driver(&leds_hp_driver);
-}
-
-MODULE_DESCRIPTION("Driver for HP disk protection LED");
-MODULE_AUTHOR("Pavel Machek <pavel@suse.cz>");
-MODULE_LICENSE("GPL");
-
-module_init(hpled_init_module);
-module_exit(hpled_exit_module);
-- 
GitLab


From 219beb291ba9275dd676578724103abed4cfbfe3 Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@suse.cz>
Date: Thu, 15 Jan 2009 13:51:24 -0800
Subject: [PATCH 485/492] lis3: fix documentation to fit into 80 columns
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fix lis3 documentation to fit into 80 columns.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/hwmon/lis3lv02d | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/Documentation/hwmon/lis3lv02d b/Documentation/hwmon/lis3lv02d
index 65dfb0c0fd6..0fcfc4a7ccd 100644
--- a/Documentation/hwmon/lis3lv02d
+++ b/Documentation/hwmon/lis3lv02d
@@ -13,18 +13,21 @@ Author:
 Description
 -----------
 
-This driver provides support for the accelerometer found in various HP laptops
-sporting the feature officially called "HP Mobile Data Protection System 3D" or
-"HP 3D DriveGuard". It detect automatically laptops with this sensor. Known models
-(for now the HP 2133, nc6420, nc2510, nc8510, nc84x0, nw9440 and nx9420) will
-have their axis automatically oriented on standard way (eg: you can directly
-play neverball).  The accelerometer data is readable via
+This driver provides support for the accelerometer found in various HP
+laptops sporting the feature officially called "HP Mobile Data
+Protection System 3D" or "HP 3D DriveGuard". It detect automatically
+laptops with this sensor. Known models (for now the HP 2133, nc6420,
+nc2510, nc8510, nc84x0, nw9440 and nx9420) will have their axis
+automatically oriented on standard way (eg: you can directly play
+neverball).  The accelerometer data is readable via
 /sys/devices/platform/lis3lv02d.
 
 Sysfs attributes under /sys/devices/platform/lis3lv02d/:
 position - 3D position that the accelerometer reports. Format: "(x,y,z)"
-calibrate - read: values (x, y, z) that are used as the base for input class device operation.
-            write: forces the base to be recalibrated with the current position.
+calibrate - read: values (x, y, z) that are used as the base for input
+		  class device operation.
+            write: forces the base to be recalibrated with the current
+		  position.
 rate - reports the sampling rate of the accelerometer device in HZ
 
 This driver also provides an absolute input class device, allowing
@@ -39,11 +42,12 @@ the accelerometer are converted into a "standard" organisation of the axes
  * When the laptop is horizontal the position reported is about 0 for X and Y
 and a positive value for Z
  * If the left side is elevated, X increases (becomes positive)
- * If the front side (where the touchpad is) is elevated, Y decreases (becomes negative)
+ * If the front side (where the touchpad is) is elevated, Y decreases
+	(becomes negative)
  * If the laptop is put upside-down, Z becomes negative
 
-If your laptop model is not recognized (cf "dmesg"), you can send an email to the
-authors to add it to the database.  When reporting a new laptop, please include
-the output of "dmidecode" plus the value of /sys/devices/platform/lis3lv02d/position
-in these four cases.
+If your laptop model is not recognized (cf "dmesg"), you can send an
+email to the authors to add it to the database.  When reporting a new
+laptop, please include the output of "dmidecode" plus the value of
+/sys/devices/platform/lis3lv02d/position in these four cases.
 
-- 
GitLab


From 9e1c9d865543593ee92ec3a5075f064dec981a96 Mon Sep 17 00:00:00 2001
From: Pavel Machek <pavel@suse.cz>
Date: Thu, 15 Jan 2009 13:51:24 -0800
Subject: [PATCH 486/492] hp_accel: do not call ACPI from invalid context
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The LED on HP notebooks is connected through ACPI.  That unfortunately
means that it needs to be delayed by using schedule_work() to avoid
calling the ACPI interpreter from an invalid context.

[akpm@linux-foundation.org: use flush_work() rather than sort-of reimplementing it]
Signed-off-by: Pavel Machek <pavel@suse.cz>
Cc: Éric Piel <eric.piel@tremplin-utc.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/hwmon/hp_accel.c | 68 +++++++++++++++++++++++++++++-----------
 1 file changed, 49 insertions(+), 19 deletions(-)

diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 86a0f51d99d..03705240000 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -3,7 +3,7 @@
  *
  *  Copyright (C) 2007-2008 Yan Burman
  *  Copyright (C) 2008 Eric Piel
- *  Copyright (C) 2008 Pavel Machek
+ *  Copyright (C) 2008-2009 Pavel Machek
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -44,6 +44,36 @@
 #define DRIVER_NAME     "lis3lv02d"
 #define ACPI_MDPS_CLASS "accelerometer"
 
+/* Delayed LEDs infrastructure ------------------------------------ */
+
+/* Special LED class that can defer work */
+struct delayed_led_classdev {
+	struct led_classdev led_classdev;
+	struct work_struct work;
+	enum led_brightness new_brightness;
+
+	unsigned int led;		/* For driver */
+	void (*set_brightness)(struct delayed_led_classdev *data, enum led_brightness value);
+};
+
+static inline void delayed_set_status_worker(struct work_struct *work)
+{
+	struct delayed_led_classdev *data =
+			container_of(work, struct delayed_led_classdev, work);
+
+	data->set_brightness(data, data->new_brightness);
+}
+
+static inline void delayed_sysfs_set(struct led_classdev *led_cdev,
+			      enum led_brightness brightness)
+{
+	struct delayed_led_classdev *data = container_of(led_cdev,
+			     struct delayed_led_classdev, led_classdev);
+	data->new_brightness = brightness;
+	schedule_work(&data->work);
+}
+
+/* HP-specific accelerometer driver ------------------------------------ */
 
 /* For automatic insertion of the module */
 static struct acpi_device_id lis3lv02d_device_ids[] = {
@@ -155,28 +185,27 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
  */
 };
 
-static acpi_status hpled_acpi_write(acpi_handle handle, int reg)
+static void hpled_set(struct delayed_led_classdev *led_cdev, enum led_brightness value)
 {
+	acpi_handle handle = adev.device->handle;
 	unsigned long long ret; /* Not used when writing */
 	union acpi_object in_obj[1];
 	struct acpi_object_list args = { 1, in_obj };
 
 	in_obj[0].type          = ACPI_TYPE_INTEGER;
-	in_obj[0].integer.value = reg;
+	in_obj[0].integer.value = !!value;
 
-	return acpi_evaluate_integer(handle, "ALED", &args, &ret);
-}
-
-static void hpled_set(struct led_classdev *led_cdev,
-			       enum led_brightness value)
-{
-	hpled_acpi_write(adev.device->handle, !!value);
+	acpi_evaluate_integer(handle, "ALED", &args, &ret);
 }
 
-static struct led_classdev hpled_led = {
-	.name			= "hp:red:hddprotection",
-	.default_trigger	= "none",
-	.brightness_set		= hpled_set,
+static struct delayed_led_classdev hpled_led = {
+	.led_classdev = {
+		.name			= "hp::hddprotect",
+		.default_trigger	= "none",
+		.brightness_set		= delayed_sysfs_set,
+		.flags                  = LED_CORE_SUSPENDRESUME,
+	},
+	.set_brightness = hpled_set,
 };
 
 static int lis3lv02d_add(struct acpi_device *device)
@@ -208,13 +237,15 @@ static int lis3lv02d_add(struct acpi_device *device)
 		adev.ac = lis3lv02d_axis_normal;
 	}
 
-	ret = led_classdev_register(NULL, &hpled_led);
+	INIT_WORK(&hpled_led.work, delayed_set_status_worker);
+	ret = led_classdev_register(NULL, &hpled_led.led_classdev);
 	if (ret)
 		return ret;
 
 	ret = lis3lv02d_init_device(&adev);
 	if (ret) {
-		led_classdev_unregister(&hpled_led);
+		flush_work(&hpled_led.work);
+		led_classdev_unregister(&hpled_led.led_classdev);
 		return ret;
 	}
 
@@ -229,7 +260,8 @@ static int lis3lv02d_remove(struct acpi_device *device, int type)
 	lis3lv02d_joystick_disable();
 	lis3lv02d_poweroff(device->handle);
 
-	led_classdev_unregister(&hpled_led);
+	flush_work(&hpled_led.work);
+	led_classdev_unregister(&hpled_led.led_classdev);
 
 	return lis3lv02d_remove_fs();
 }
@@ -240,7 +272,6 @@ static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state)
 {
 	/* make sure the device is off when we suspend */
 	lis3lv02d_poweroff(device->handle);
-	led_classdev_suspend(&hpled_led);
 	return 0;
 }
 
@@ -253,7 +284,6 @@ static int lis3lv02d_resume(struct acpi_device *device)
 	else
 		lis3lv02d_poweroff(device->handle);
 	mutex_unlock(&adev.lock);
-	led_classdev_resume(&hpled_led);
 	return 0;
 }
 #else
-- 
GitLab


From 0eb253e223c88b982461e59154fcad1b82597592 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Thu, 15 Jan 2009 13:51:25 -0800
Subject: [PATCH 487/492] memcg: fix section mismatch

At system boot when creating the top cgroup, mem_cgroup_create() calls
enable_swap_cgroup() which is marked as __init, so mark
mem_cgroup_create() as __ref to avoid false section mismatch warning.

Reported-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by; KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index fb62b4335fa..f0dc076adf0 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -2202,7 +2202,7 @@ static void __init enable_swap_cgroup(void)
 }
 #endif
 
-static struct cgroup_subsys_state *
+static struct cgroup_subsys_state * __ref
 mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
 {
 	struct mem_cgroup *mem, *parent;
-- 
GitLab


From 068b38c1fa7a9210608f27ac521897ccc5f9b726 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Thu, 15 Jan 2009 13:51:26 -0800
Subject: [PATCH 488/492] memcg: fix a race when setting memory.swappiness

(suppose: memcg->use_hierarchy == 0 and memcg->swappiness == 60)

echo 10 > /memcg/0/swappiness   |
  mem_cgroup_swappiness_write() |
    ...                         | echo 1 > /memcg/0/use_hierarchy
                                | mkdir /mnt/0/1
                                |   sub_memcg->swappiness = 60;
    memcg->swappiness = 10;     |

In the above scenario, we end up having 2 different swappiness
values in a single hierarchy.

We should hold cgroup_lock() when cheking cgrp->children list.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/memcontrol.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index f0dc076adf0..4d0ea3ceba6 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1992,6 +1992,7 @@ static int mem_cgroup_swappiness_write(struct cgroup *cgrp, struct cftype *cft,
 {
 	struct mem_cgroup *memcg = mem_cgroup_from_cont(cgrp);
 	struct mem_cgroup *parent;
+
 	if (val > 100)
 		return -EINVAL;
 
@@ -1999,15 +2000,22 @@ static int mem_cgroup_swappiness_write(struct cgroup *cgrp, struct cftype *cft,
 		return -EINVAL;
 
 	parent = mem_cgroup_from_cont(cgrp->parent);
+
+	cgroup_lock();
+
 	/* If under hierarchy, only empty-root can set this value */
 	if ((parent->use_hierarchy) ||
-	    (memcg->use_hierarchy && !list_empty(&cgrp->children)))
+	    (memcg->use_hierarchy && !list_empty(&cgrp->children))) {
+		cgroup_unlock();
 		return -EINVAL;
+	}
 
 	spin_lock(&memcg->reclaim_param_lock);
 	memcg->swappiness = val;
 	spin_unlock(&memcg->reclaim_param_lock);
 
+	cgroup_unlock();
+
 	return 0;
 }
 
-- 
GitLab


From 00bfddaf7f68a6551319b536f052040c370756b0 Mon Sep 17 00:00:00 2001
From: Jaswinder Singh Rajput <jaswinder@infradead.org>
Date: Thu, 15 Jan 2009 13:51:26 -0800
Subject: [PATCH 489/492] include of <linux/types.h> is preferred over
 <asm/types.h>

Impact: fix 15 make headers_check warnings:

include of <linux/types.h> is preferred over <asm/types.h>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/agpgart.h      | 1 -
 include/linux/atm_idt77105.h | 2 +-
 include/linux/capi.h         | 2 +-
 include/linux/connector.h    | 2 +-
 include/linux/cyclades.h     | 2 --
 include/linux/fb.h           | 2 +-
 include/linux/if_pppol2tp.h  | 2 +-
 include/linux/if_pppox.h     | 2 +-
 include/linux/input.h        | 2 +-
 include/linux/joystick.h     | 2 +-
 include/linux/kvm.h          | 2 +-
 include/linux/loop.h         | 2 +-
 include/linux/matroxfb.h     | 2 +-
 include/linux/phantom.h      | 2 +-
 include/linux/radeonfb.h     | 2 +-
 15 files changed, 13 insertions(+), 16 deletions(-)

diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h
index c8fdb6e658e..110c600c885 100644
--- a/include/linux/agpgart.h
+++ b/include/linux/agpgart.h
@@ -52,7 +52,6 @@
 
 #ifndef __KERNEL__
 #include <linux/types.h>
-#include <asm/types.h>
 
 struct agp_version {
 	__u16 major;
diff --git a/include/linux/atm_idt77105.h b/include/linux/atm_idt77105.h
index 05621cf2070..8b724000aa5 100644
--- a/include/linux/atm_idt77105.h
+++ b/include/linux/atm_idt77105.h
@@ -7,7 +7,7 @@
 #ifndef LINUX_ATM_IDT77105_H
 #define LINUX_ATM_IDT77105_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/atmioc.h>
 #include <linux/atmdev.h>
 
diff --git a/include/linux/capi.h b/include/linux/capi.h
index fdebaaa9f66..65100d6cb89 100644
--- a/include/linux/capi.h
+++ b/include/linux/capi.h
@@ -12,7 +12,7 @@
 #ifndef __LINUX_CAPI_H__
 #define __LINUX_CAPI_H__
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/ioctl.h>
 #ifndef __KERNEL__
 #include <linux/kernelcapi.h>
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 5c7f9468f75..34f2789d9b9 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -22,7 +22,7 @@
 #ifndef __CONNECTOR_H
 #define __CONNECTOR_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 #define CN_IDX_CONNECTOR		0xffffffff
 #define CN_VAL_CONNECTOR		0xffffffff
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
index 2d3d1e04ba9..d06fbf28634 100644
--- a/include/linux/cyclades.h
+++ b/include/linux/cyclades.h
@@ -150,8 +150,6 @@ struct CYZ_BOOT_CTRL {
  *	architectures and compilers.
  */
 
-#include <asm/types.h>
-
 typedef __u64  ucdouble;		/* 64 bits, unsigned */
 typedef __u32  uclong;			/* 32 bits, unsigned */
 typedef __u16  ucshort;		/* 16 bits, unsigned */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 1ee63df5be9..818fe21257e 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -1,7 +1,7 @@
 #ifndef _LINUX_FB_H
 #define _LINUX_FB_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/i2c.h>
 
 struct dentry;
diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
index a7d6a2234b3..c7a66882b6d 100644
--- a/include/linux/if_pppol2tp.h
+++ b/include/linux/if_pppol2tp.h
@@ -15,7 +15,7 @@
 #ifndef __LINUX_IF_PPPOL2TP_H
 #define __LINUX_IF_PPPOL2TP_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 #ifdef __KERNEL__
 #include <linux/in.h>
diff --git a/include/linux/if_pppox.h b/include/linux/if_pppox.h
index 6fb7f178857..30c88b2245f 100644
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -17,7 +17,7 @@
 #define __LINUX_IF_PPPOX_H
 
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <asm/byteorder.h>
 
 #ifdef  __KERNEL__
diff --git a/include/linux/input.h b/include/linux/input.h
index 9a6355f74db..1249a0c20a3 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -16,7 +16,7 @@
 #include <sys/time.h>
 #include <sys/ioctl.h>
 #include <sys/types.h>
-#include <asm/types.h>
+#include <linux/types.h>
 #endif
 
 /*
diff --git a/include/linux/joystick.h b/include/linux/joystick.h
index b5e051295a6..9e20c29c1e1 100644
--- a/include/linux/joystick.h
+++ b/include/linux/joystick.h
@@ -27,7 +27,7 @@
  * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic
  */
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/input.h>
 
 /*
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 35525ac6333..5715f190760 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -7,7 +7,7 @@
  * Note: you must update KVM_API_VERSION if you change this interface.
  */
 
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/compiler.h>
 #include <linux/ioctl.h>
 #include <asm/kvm.h>
diff --git a/include/linux/loop.h b/include/linux/loop.h
index 46169a7b559..6ffd6db5bb0 100644
--- a/include/linux/loop.h
+++ b/include/linux/loop.h
@@ -80,7 +80,7 @@ enum {
 };
 
 #include <asm/posix_types.h>	/* for __kernel_old_dev_t */
-#include <asm/types.h>		/* for __u64 */
+#include <linux/types.h>	/* for __u64 */
 
 /* Backwards compatibility version */
 struct loop_info {
diff --git a/include/linux/matroxfb.h b/include/linux/matroxfb.h
index ae5b0949306..404f678e734 100644
--- a/include/linux/matroxfb.h
+++ b/include/linux/matroxfb.h
@@ -2,7 +2,7 @@
 #define __LINUX_MATROXFB_H__
 
 #include <asm/ioctl.h>
-#include <asm/types.h>
+#include <linux/types.h>
 #include <linux/videodev2.h>
 
 struct matroxioc_output_mode {
diff --git a/include/linux/phantom.h b/include/linux/phantom.h
index 02268c54c25..94dd6645c60 100644
--- a/include/linux/phantom.h
+++ b/include/linux/phantom.h
@@ -10,7 +10,7 @@
 #ifndef __PHANTOM_H
 #define __PHANTOM_H
 
-#include <asm/types.h>
+#include <linux/types.h>
 
 /* PHN_(G/S)ET_REG param */
 struct phm_reg {
diff --git a/include/linux/radeonfb.h b/include/linux/radeonfb.h
index 5bd8975ed78..8c4bbdecc44 100644
--- a/include/linux/radeonfb.h
+++ b/include/linux/radeonfb.h
@@ -2,7 +2,7 @@
 #define __LINUX_RADEONFB_H__
 
 #include <asm/ioctl.h>
-#include <asm/types.h>
+#include <linux/types.h>
 
 #define ATY_RADEON_LCD_ON	0x00000001
 #define ATY_RADEON_CRT_ON	0x00000002
-- 
GitLab


From 634a84f8d5b74da497688d3346f6809c28239eda Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Thu, 15 Jan 2009 13:51:28 -0800
Subject: [PATCH 490/492] drivers/usb/core/hub.c: fix CONFIG_USB_OTG=y build

Carry out the PM-routine interface change in the USB OTG pathway.  This
was omitted from the earlier interface-change patch by mistake.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/core/hub.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index d5d0e40b1e2..94d5ee263c2 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1554,7 +1554,7 @@ static int usb_configure_device_otg(struct usb_device *udev)
 		 * (Includes HNP test device.)
 		 */
 		if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
-			err = usb_port_suspend(udev);
+			err = usb_port_suspend(udev, PMSG_SUSPEND);
 			if (err < 0)
 				dev_dbg(&udev->dev, "HNP fail, %d\n", err);
 		}
-- 
GitLab


From 6b7021ef7e1a703c7092daeceda063951b22b4f6 Mon Sep 17 00:00:00 2001
From: Jan Kara <jack@suse.cz>
Date: Thu, 15 Jan 2009 13:51:29 -0800
Subject: [PATCH 491/492] ext2: also update the inode on disk when dir is
 IS_DIRSYNC

We used to just write changed page for IS_DIRSYNC inodes.  But we also
have to update the directory inode itself just for the case that we've
allocated a new block and changed i_size.

[akpm@linux-foundation.org: still sync the data page]
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ext2/dir.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/fs/ext2/dir.c b/fs/ext2/dir.c
index 9a0fc400f91..2999d72153b 100644
--- a/fs/ext2/dir.c
+++ b/fs/ext2/dir.c
@@ -95,10 +95,13 @@ static int ext2_commit_chunk(struct page *page, loff_t pos, unsigned len)
 		mark_inode_dirty(dir);
 	}
 
-	if (IS_DIRSYNC(dir))
+	if (IS_DIRSYNC(dir)) {
 		err = write_one_page(page, 1);
-	else
+		if (!err)
+			err = ext2_sync_inode(dir);
+	} else {
 		unlock_page(page);
+	}
 
 	return err;
 }
-- 
GitLab


From 6364853dabe78dda7ffdfb8803c1e56c0fff2e43 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rdreier@cisco.com>
Date: Thu, 15 Jan 2009 13:51:29 -0800
Subject: [PATCH 492/492] 9p: disallow RDMA if RDMA CM isn't available

If INET=y and INFINIBAND=y, but IPV6=m then INFINIBAND_ADDR_TRANS is set
to n and the RDMA CM functions rdma_connect() et al are not built.
However, the current config dependencies allow NET_9P_RDMA to be selected
in this, which leads to a build failure.  Fix this by adding a dependency
on INFINIBAND_ADDR_TRANS to disallow NET_9P_RDMA in this case.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 net/9p/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/9p/Kconfig b/net/9p/Kconfig
index 0663f99e977..7ed75c7bd5d 100644
--- a/net/9p/Kconfig
+++ b/net/9p/Kconfig
@@ -23,7 +23,7 @@ config NET_9P_VIRTIO
 	  guest partitions and a host partition.
 
 config NET_9P_RDMA
-	depends on INET && INFINIBAND && EXPERIMENTAL
+	depends on INET && INFINIBAND && INFINIBAND_ADDR_TRANS && EXPERIMENTAL
 	tristate "9P RDMA Transport (Experimental)"
 	help
 	  This builds support for an RDMA transport.
-- 
GitLab