From 58475fb908485ab38860d6970a8063987fe1d619 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Thu, 24 Sep 2009 13:04:53 +0100 Subject: [PATCH 0001/1165] mtd: nand: fix htmldocs warnings Fixed following htmldocs warnings: DOCPROC Documentation/DocBook/mtdnand.xml Warning(drivers/mtd/nand/nand_base.c:769): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:785): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:824): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:947): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:996): No description found for parameter 'page' Warning(drivers/mtd/nand/nand_base.c:1040): No description found for parameter 'page' Signed-off-by: Jaswinder Singh Rajput Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 22113865438..2957cc70da3 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -761,6 +761,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip) * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Not for syndrome calculating ecc controllers, which use a special oob layout */ @@ -777,6 +778,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * We need a special oob layout and handling even when OOB isn't used. */ @@ -818,6 +820,7 @@ static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *c * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read */ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int page) @@ -939,6 +942,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3 * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Not for syndrome calculating ecc controllers which need a special oob layout */ @@ -983,6 +987,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Hardware ECC for large page chips, require OOB to be read first. * For this ECC mode, the write_page method is re-used from ECC_HW. @@ -1031,6 +1036,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * The hw generator calculates the error syndrome automatically. Therefor * we need a special oob layout and handling. -- GitLab From f5bae56a501347671b18095731d78e13eee5205f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Sep 2009 15:11:37 -0400 Subject: [PATCH 0002/1165] mtd/maps: gpio-addr-flash: pull in linux/ headers rather than asm/ Now that there are linux/ versions of gpio.h and io.h, include those rather than hitting the asm/ versions. Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse --- drivers/mtd/maps/gpio-addr-flash.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c index 44ef9a49a86..1ad5caf9fe6 100644 --- a/drivers/mtd/maps/gpio-addr-flash.c +++ b/drivers/mtd/maps/gpio-addr-flash.c @@ -13,7 +13,9 @@ * Licensed under the GPL-2 or later. */ +#include #include +#include #include #include #include @@ -23,9 +25,6 @@ #include #include -#include -#include - #define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); }) #define DRIVER_NAME "gpio-addr-flash" -- GitLab From de19d02b731478877ce8b1ccf371c2b2142ac80e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 24 Sep 2009 15:11:38 -0400 Subject: [PATCH 0003/1165] mtd/maps: gpio-addr-flash: depend on GPIO arch support The driver requires gpio functionality, so make sure we depend on that in the Kconfig menu. Signed-off-by: Mike Frysinger Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 3a9a960644b..0fc67a2c578 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -486,6 +486,7 @@ config MTD_BFIN_ASYNC config MTD_GPIO_ADDR tristate "GPIO-assisted Flash Chip Support" + depends on GENERIC_GPIO || GPIOLIB depends on MTD_COMPLEX_MAPPINGS select MTD_PARTITIONS help -- GitLab From 5cf3bcdada29c2e0af945571761ff28264650398 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 24 Sep 2009 09:58:52 +0200 Subject: [PATCH 0004/1165] i.MX27 clock: rename spi clocks to match device Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/clock_imx27.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 4089951acb4..174fa3e3094 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk) - _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk) - _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk) - _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk) + _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk) + _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk) + _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk) -- GitLab From b02019e6c8e37eec3cf214b50604af732936dd1c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Wed, 30 Sep 2009 12:35:52 +0200 Subject: [PATCH 0005/1165] mx25 devices: Add missing include Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/devices.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index eb12de1da42..25c32967405 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -1,4 +1,5 @@ #include +#include #include #include #include -- GitLab From 165e10d80092ee05fe3927bb0b075d8c25101136 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 2 Oct 2009 09:10:38 +0200 Subject: [PATCH 0006/1165] mx25pdk: remove nand support as it is not present in current tree Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/mx25pdk.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c index 92aa4fd19d9..e99d7bbdead 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -23,19 +23,12 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; -static struct mxc_nand_platform_data nand_board_info = { - .width = 1, - .hw_ecc = 1, -}; - static void __init mx25pdk_init(void) { mxc_register_device(&mxc_uart_device0, &uart_pdata); mxc_register_device(&mxc_usbh2, NULL); - mxc_register_device(&mxc_nand_device, &nand_board_info); } - static void __init mx25pdk_timer_init(void) { mx25_clocks_init(26000000); -- GitLab From de41fddd9ef1fda7e00ad4d6af59013ed9f52953 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 2 Oct 2009 09:14:18 +0200 Subject: [PATCH 0007/1165] mx25: Add missing copyright / license header Signed-off-by: Sascha Hauer --- arch/arm/mach-mx25/devices.c | 18 ++++++++++++++++++ arch/arm/mach-mx25/mx25pdk.c | 18 ++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c index 25c32967405..63511de3a55 100644 --- a/arch/arm/mach-mx25/devices.c +++ b/arch/arm/mach-mx25/devices.c @@ -1,3 +1,21 @@ +/* + * Copyright 2009 Sascha Hauer, + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + #include #include #include diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c index e99d7bbdead..d23ae571c03 100644 --- a/arch/arm/mach-mx25/mx25pdk.c +++ b/arch/arm/mach-mx25/mx25pdk.c @@ -1,3 +1,21 @@ +/* + * Copyright 2009 Sascha Hauer, + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + #include #include #include -- GitLab From 1087e9b4ff708976499b4de541d9e1d57d49b60a Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sun, 4 Oct 2009 02:20:11 +0200 Subject: [PATCH 0008/1165] HWPOISON: Clean up PR_MCE_KILL interface While writing the manpage I noticed some shortcomings in the current interface. - Define symbolic names for all the different values - Boundary check the kill mode values - For symmetry add a get interface too. This allows library code to get/set the current state. - For consistency define a PR_MCE_KILL_DEFAULT value Signed-off-by: Andi Kleen --- include/linux/prctl.h | 12 ++++++++++++ kernel/sys.c | 23 ++++++++++++++++++----- 2 files changed, 30 insertions(+), 5 deletions(-) diff --git a/include/linux/prctl.h b/include/linux/prctl.h index 931150566ad..a3baeb2c216 100644 --- a/include/linux/prctl.h +++ b/include/linux/prctl.h @@ -88,6 +88,18 @@ #define PR_TASK_PERF_EVENTS_DISABLE 31 #define PR_TASK_PERF_EVENTS_ENABLE 32 +/* + * Set early/late kill mode for hwpoison memory corruption. + * This influences when the process gets killed on a memory corruption. + */ #define PR_MCE_KILL 33 +# define PR_MCE_KILL_CLEAR 0 +# define PR_MCE_KILL_SET 1 + +# define PR_MCE_KILL_LATE 0 +# define PR_MCE_KILL_EARLY 1 +# define PR_MCE_KILL_DEFAULT 2 + +#define PR_MCE_KILL_GET 34 #endif /* _LINUX_PRCTL_H */ diff --git a/kernel/sys.c b/kernel/sys.c index 255475d163e..f6afe07d6c0 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1546,24 +1546,37 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3, if (arg4 | arg5) return -EINVAL; switch (arg2) { - case 0: + case PR_MCE_KILL_CLEAR: if (arg3 != 0) return -EINVAL; current->flags &= ~PF_MCE_PROCESS; break; - case 1: + case PR_MCE_KILL_SET: current->flags |= PF_MCE_PROCESS; - if (arg3 != 0) + if (arg3 == PR_MCE_KILL_EARLY) current->flags |= PF_MCE_EARLY; - else + else if (arg3 == PR_MCE_KILL_LATE) current->flags &= ~PF_MCE_EARLY; + else if (arg3 == PR_MCE_KILL_DEFAULT) + current->flags &= + ~(PF_MCE_EARLY|PF_MCE_PROCESS); + else + return -EINVAL; break; default: return -EINVAL; } error = 0; break; - + case PR_MCE_KILL_GET: + if (arg2 | arg3 | arg4 | arg5) + return -EINVAL; + if (current->flags & PF_MCE_PROCESS) + error = (current->flags & PF_MCE_EARLY) ? + PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE; + else + error = PR_MCE_KILL_DEFAULT; + break; default: error = -EINVAL; break; -- GitLab From f58ee00f1547ceb17b610ecfce2aa9097f1f9737 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sun, 4 Oct 2009 02:28:42 +0200 Subject: [PATCH 0009/1165] HWPOISON: Add brief hwpoison description to Documentation Signed-off-by: Andi Kleen --- Documentation/vm/hwpoison.txt | 136 ++++++++++++++++++++++++++++++++++ 1 file changed, 136 insertions(+) create mode 100644 Documentation/vm/hwpoison.txt diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt new file mode 100644 index 00000000000..3ffadf8da61 --- /dev/null +++ b/Documentation/vm/hwpoison.txt @@ -0,0 +1,136 @@ +What is hwpoison? + +Upcoming Intel CPUs have support for recovering from some memory errors +(``MCA recovery''). This requires the OS to declare a page "poisoned", +kill the processes associated with it and avoid using it in the future. + +This patchkit implements the necessary infrastructure in the VM. + +To quote the overview comment: + + * High level machine check handler. Handles pages reported by the + * hardware as being corrupted usually due to a 2bit ECC memory or cache + * failure. + * + * This focusses on pages detected as corrupted in the background. + * When the current CPU tries to consume corruption the currently + * running process can just be killed directly instead. This implies + * that if the error cannot be handled for some reason it's safe to + * just ignore it because no corruption has been consumed yet. Instead + * when that happens another machine check will happen. + * + * Handles page cache pages in various states. The tricky part + * here is that we can access any page asynchronous to other VM + * users, because memory failures could happen anytime and anywhere, + * possibly violating some of their assumptions. This is why this code + * has to be extremely careful. Generally it tries to use normal locking + * rules, as in get the standard locks, even if that means the + * error handling takes potentially a long time. + * + * Some of the operations here are somewhat inefficient and have non + * linear algorithmic complexity, because the data structures have not + * been optimized for this case. This is in particular the case + * for the mapping from a vma to a process. Since this case is expected + * to be rare we hope we can get away with this. + +The code consists of a the high level handler in mm/memory-failure.c, +a new page poison bit and various checks in the VM to handle poisoned +pages. + +The main target right now is KVM guests, but it works for all kinds +of applications. KVM support requires a recent qemu-kvm release. + +For the KVM use there was need for a new signal type so that +KVM can inject the machine check into the guest with the proper +address. This in theory allows other applications to handle +memory failures too. The expection is that near all applications +won't do that, but some very specialized ones might. + +--- + +There are two (actually three) modi memory failure recovery can be in: + +vm.memory_failure_recovery sysctl set to zero: + All memory failures cause a panic. Do not attempt recovery. + (on x86 this can be also affected by the tolerant level of the + MCE subsystem) + +early kill + (can be controlled globally and per process) + Send SIGBUS to the application as soon as the error is detected + This allows applications who can process memory errors in a gentle + way (e.g. drop affected object) + This is the mode used by KVM qemu. + +late kill + Send SIGBUS when the application runs into the corrupted page. + This is best for memory error unaware applications and default + Note some pages are always handled as late kill. + +--- + +User control: + +vm.memory_failure_recovery + See sysctl.txt + +vm.memory_failure_early_kill + Enable early kill mode globally + +PR_MCE_KILL + Set early/late kill mode/revert to system default + arg1: PR_MCE_KILL_CLEAR: Revert to system default + arg1: PR_MCE_KILL_SET: arg2 defines thread specific mode + PR_MCE_KILL_EARLY: Early kill + PR_MCE_KILL_LATE: Late kill + PR_MCE_KILL_DEFAULT: Use system global default +PR_MCE_KILL_GET + return current mode + + +--- + +Testing: + +madvise(MADV_POISON, ....) + (as root) + Poison a page in the process for testing + + +hwpoison-inject module through debugfs + /sys/debug/hwpoison/corrupt-pfn + +Inject hwpoison fault at PFN echoed into this file + + +Architecture specific MCE injector + +x86 has mce-inject, mce-test + +Some portable hwpoison test programs in mce-test, see blow. + +--- + +References: + +http://halobates.de/mce-lc09-2.pdf + Overview presentation from LinuxCon 09 + +git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git + Test suite (hwpoison specific portable tests in tsrc) + +git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git + x86 specific injector + + +--- + +Limitations: + +- Not all page types are supported and never will. Most kernel internal +objects cannot be recovered, only LRU pages for now. +- Right now hugepage support is missing. + +--- +Andi Kleen, Oct 2009 + -- GitLab From 8347a5cdd1422eea0470ed586274c7f29e274b47 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 6 Oct 2009 18:31:29 +0000 Subject: [PATCH 0010/1165] [CIFS] Fixing to avoid invalid kfree() in cifs_get_tcp_session() trivial bug in fs/cifs/connect.c . The bug is caused by fail of extract_hostname() when mounting cifs file system. This is the situation when I noticed this bug. % sudo mount -t cifs //192.168.10.208 mountpoint -o options... Then my kernel says, [ 1461.807776] ------------[ cut here ]------------ [ 1461.807781] kernel BUG at mm/slab.c:521! [ 1461.807784] invalid opcode: 0000 [#2] PREEMPT SMP [ 1461.807790] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:09:02.0/resource [ 1461.807793] CPU 0 [ 1461.807796] Modules linked in: nls_iso8859_1 usbhid sbp2 uhci_hcd ehci_hcd i2c_i801 ohci1394 ieee1394 psmouse serio_raw pcspkr sky2 usbcore evdev [ 1461.807816] Pid: 3446, comm: mount Tainted: G D 2.6.32-rc2-vanilla [ 1461.807820] RIP: 0010:[] [] kfree+0x63/0x156 [ 1461.807829] RSP: 0018:ffff8800b4f7fbb8 EFLAGS: 00010046 [ 1461.807832] RAX: ffffea00033fff98 RBX: ffff8800afbae7e2 RCX: 0000000000000000 [ 1461.807836] RDX: ffffea0000000000 RSI: 000000000000005c RDI: ffffffffffffffea [ 1461.807839] RBP: ffff8800b4f7fbf8 R08: 0000000000000001 R09: 0000000000000000 [ 1461.807842] R10: 0000000000000000 R11: ffff8800b4f7fbf8 R12: 00000000ffffffea [ 1461.807845] R13: ffff8800afb23000 R14: ffff8800b4f87bc0 R15: ffffffffffffffea [ 1461.807849] FS: 00007f52b6f187c0(0000) GS:ffff880007600000(0000) knlGS:0000000000000000 [ 1461.807852] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1461.807855] CR2: 0000000000613000 CR3: 00000000af8f9000 CR4: 00000000000006f0 [ 1461.807858] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1461.807861] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1461.807865] Process mount (pid: 3446, threadinfo ffff8800b4f7e000, task ffff8800950e4380) [ 1461.807867] Stack: [ 1461.807869] 0000000000000202 0000000000000282 ffff8800b4f7fbf8 ffff8800afbae7e2 [ 1461.807876] <0> 00000000ffffffea ffff8800afb23000 ffff8800b4f87bc0 ffff8800b4f7fc28 [ 1461.807884] <0> ffff8800b4f7fcd8 ffffffff81159f6d ffffffff81147bc2 ffffffff816bfb48 [ 1461.807892] Call Trace: [ 1461.807899] [] cifs_get_tcp_session+0x440/0x44b [ 1461.807904] [] ? find_nls+0x1c/0xe9 [ 1461.807909] [] cifs_mount+0x16bc/0x2167 [ 1461.807917] [] ? _spin_unlock+0x30/0x4b [ 1461.807923] [] cifs_get_sb+0xa5/0x1a8 [ 1461.807928] [] vfs_kern_mount+0x56/0xc9 [ 1461.807933] [] do_kern_mount+0x47/0xe7 [ 1461.807938] [] do_mount+0x712/0x775 [ 1461.807943] [] ? copy_mount_options+0xcf/0x132 [ 1461.807948] [] sys_mount+0x7f/0xbf [ 1461.807953] [] ? lockdep_sys_exit_thunk+0x35/0x67 [ 1461.807960] [] system_call_fastpath+0x16/0x1b [ 1461.807963] Code: 00 00 00 00 ea ff ff 48 c1 e8 0c 48 6b c0 68 48 01 d0 66 83 38 00 79 04 48 8b 40 10 66 83 38 00 79 04 48 8b 40 10 80 38 00 78 04 <0f> 0b eb fe 4c 8b 70 58 4c 89 ff 41 8b 76 4c e8 b8 49 fb ff e8 [ 1461.808022] RIP [] kfree+0x63/0x156 [ 1461.808027] RSP [ 1461.808031] ---[ end trace ffe26fcdc72c0ce4 ]--- The reason of this bug is that the error handling code of cifs_get_tcp_session() calls kfree() when corresponding kmalloc() failed. (The kmalloc() is called by extract_hostname().) Signed-off-by: Hitoshi Mitake CC: Stable Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 43003e0bef1..b0909807991 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1577,7 +1577,8 @@ cifs_get_tcp_session(struct smb_vol *volume_info) out_err: if (tcp_ses) { - kfree(tcp_ses->hostname); + if (!IS_ERR(tcp_ses->hostname)) + kfree(tcp_ses->hostname); if (tcp_ses->ssocket) sock_release(tcp_ses->ssocket); kfree(tcp_ses); -- GitLab From 9d40ee200a527ce08ab8c793ba8ae3e242edbb0e Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Wed, 7 Oct 2009 10:54:19 -0700 Subject: [PATCH 0011/1165] [IA64] Squeeze ticket locks back into 4 bytes. Linus pointed out that other people have spent large amounts of time and effort to optimize the layout of frequently used structures. Often these have embedded locks, and the assumption is that a lock takes 4 bytes. Linus also pointed out how to work with the limited options for atomic instructions on Itanium. Signed-off-by: Tony Luck --- arch/ia64/include/asm/spinlock.h | 45 +++++++++++++++----------- arch/ia64/include/asm/spinlock_types.h | 2 +- 2 files changed, 27 insertions(+), 20 deletions(-) diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h index 30bb930e111..4fa502739d6 100644 --- a/arch/ia64/include/asm/spinlock.h +++ b/arch/ia64/include/asm/spinlock.h @@ -25,61 +25,68 @@ * by atomically noting the tail and incrementing it by one (thus adding * ourself to the queue and noting our position), then waiting until the head * becomes equal to the the initial value of the tail. + * The pad bits in the middle are used to prevent the next_ticket number + * overflowing into the now_serving number. * - * 63 32 31 0 + * 31 17 16 15 14 0 * +----------------------------------------------------+ - * | next_ticket_number | now_serving | + * | now_serving | padding | next_ticket | * +----------------------------------------------------+ */ -#define TICKET_SHIFT 32 +#define TICKET_SHIFT 17 +#define TICKET_BITS 15 +#define TICKET_MASK ((1 << TICKET_BITS) - 1) static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock) { - int *p = (int *)&lock->lock, turn, now_serving; + int *p = (int *)&lock->lock, ticket, serve; - now_serving = *p; - turn = ia64_fetchadd(1, p+1, acq); + ticket = ia64_fetchadd(1, p, acq); - if (turn == now_serving) + if (!(((ticket >> TICKET_SHIFT) ^ ticket) & TICKET_MASK)) return; - do { + ia64_invala(); + + for (;;) { + asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(p) : "memory"); + + if (!(((serve >> TICKET_SHIFT) ^ ticket) & TICKET_MASK)) + return; cpu_relax(); - } while (ACCESS_ONCE(*p) != turn); + } } static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock) { - long tmp = ACCESS_ONCE(lock->lock), try; + int tmp = ACCESS_ONCE(lock->lock); - if (!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1))) { - try = tmp + (1L << TICKET_SHIFT); - - return ia64_cmpxchg(acq, &lock->lock, tmp, try, sizeof (tmp)) == tmp; - } + if (!(((tmp >> TICKET_SHIFT) ^ tmp) & TICKET_MASK)) + return ia64_cmpxchg(acq, &lock->lock, tmp, tmp + 1, sizeof (tmp)) == tmp; return 0; } static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock) { - int *p = (int *)&lock->lock; + unsigned short *p = (unsigned short *)&lock->lock + 1, tmp; - (void)ia64_fetchadd(1, p, rel); + asm volatile ("ld2.bias %0=[%1]" : "=r"(tmp) : "r"(p)); + ACCESS_ONCE(*p) = (tmp + 2) & ~1; } static inline int __ticket_spin_is_locked(raw_spinlock_t *lock) { long tmp = ACCESS_ONCE(lock->lock); - return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1)); + return !!(((tmp >> TICKET_SHIFT) ^ tmp) & TICKET_MASK); } static inline int __ticket_spin_is_contended(raw_spinlock_t *lock) { long tmp = ACCESS_ONCE(lock->lock); - return (((tmp >> TICKET_SHIFT) - tmp) & ((1L << TICKET_SHIFT) - 1)) > 1; + return ((tmp - (tmp >> TICKET_SHIFT)) & TICKET_MASK) > 1; } static inline int __raw_spin_is_locked(raw_spinlock_t *lock) diff --git a/arch/ia64/include/asm/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h index b61d136d9bc..474e46f1ab4 100644 --- a/arch/ia64/include/asm/spinlock_types.h +++ b/arch/ia64/include/asm/spinlock_types.h @@ -6,7 +6,7 @@ #endif typedef struct { - volatile unsigned long lock; + volatile unsigned int lock; } raw_spinlock_t; #define __RAW_SPIN_LOCK_UNLOCKED { 0 } -- GitLab From c5cca146aa03e1f60fb179df65f0dbaf17bc64ed Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Fri, 9 Oct 2009 18:31:20 +0200 Subject: [PATCH 0012/1165] x86/amd-iommu: Workaround for erratum 63 There is an erratum for IOMMU hardware which documents undefined behavior when forwarding SMI requests from peripherals and the DTE of that peripheral has a sysmgt value of 01b. This problem caused weird IO_PAGE_FAULTS in my case. This patch implements the suggested workaround for that erratum into the AMD IOMMU driver. The erratum is documented with number 63. Cc: stable@kernel.org Signed-off-by: Joerg Roedel --- arch/x86/include/asm/amd_iommu.h | 1 + arch/x86/kernel/amd_iommu.c | 2 ++ arch/x86/kernel/amd_iommu_init.c | 22 ++++++++++++++++++++++ 3 files changed, 25 insertions(+) diff --git a/arch/x86/include/asm/amd_iommu.h b/arch/x86/include/asm/amd_iommu.h index bdf96f119f0..9dbd4030f0c 100644 --- a/arch/x86/include/asm/amd_iommu.h +++ b/arch/x86/include/asm/amd_iommu.h @@ -30,6 +30,7 @@ extern irqreturn_t amd_iommu_int_handler(int irq, void *data); extern void amd_iommu_flush_all_domains(void); extern void amd_iommu_flush_all_devices(void); extern void amd_iommu_shutdown(void); +extern void amd_iommu_apply_erratum_63(u16 devid); #else static inline int amd_iommu_init(void) { return -ENODEV; } static inline void amd_iommu_detect(void) { } diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 6c99f503780..f95dfe52644 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -1114,6 +1114,8 @@ static void __detach_device(struct protection_domain *domain, u16 devid) amd_iommu_dev_table[devid].data[1] = 0; amd_iommu_dev_table[devid].data[2] = 0; + amd_iommu_apply_erratum_63(devid); + /* decrease reference counter */ domain->dev_cnt -= 1; diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index c1b17e97252..498c8c79aaa 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -509,6 +509,26 @@ static void set_dev_entry_bit(u16 devid, u8 bit) amd_iommu_dev_table[devid].data[i] |= (1 << _bit); } +static int get_dev_entry_bit(u16 devid, u8 bit) +{ + int i = (bit >> 5) & 0x07; + int _bit = bit & 0x1f; + + return (amd_iommu_dev_table[devid].data[i] & (1 << _bit)) >> _bit; +} + + +void amd_iommu_apply_erratum_63(u16 devid) +{ + int sysmgt; + + sysmgt = get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1) | + (get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2) << 1); + + if (sysmgt == 0x01) + set_dev_entry_bit(devid, DEV_ENTRY_IW); +} + /* Writes the specific IOMMU for a device into the rlookup table */ static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid) { @@ -537,6 +557,8 @@ static void __init set_dev_entry_from_acpi(struct amd_iommu *iommu, if (flags & ACPI_DEVFLAG_LINT1) set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS); + amd_iommu_apply_erratum_63(devid); + set_iommu_for_device(iommu, devid); } -- GitLab From 883a3acf5b0d4782ac35981227a0d094e8b44850 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Fri, 9 Oct 2009 10:52:39 -0700 Subject: [PATCH 0013/1165] [IA64] Re-implement spinaphores using ticket lock concepts Bound the wait time for the ptcg_sem by using similar idea to the ticket spin locks. In this case we have only one instance of a spinaphore, so make it 8 bytes rather than try to squeeze it into 4-bytes to keep the code simpler (and shorter). Signed-off-by: Tony Luck --- arch/ia64/mm/tlb.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index f426dc78d95..ee09d261f2e 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -100,24 +100,36 @@ wrap_mmu_context (struct mm_struct *mm) * this primitive it can be moved up to a spinaphore.h header. */ struct spinaphore { - atomic_t cur; + unsigned long ticket; + unsigned long serve; }; static inline void spinaphore_init(struct spinaphore *ss, int val) { - atomic_set(&ss->cur, val); + ss->ticket = 0; + ss->serve = val; } static inline void down_spin(struct spinaphore *ss) { - while (unlikely(!atomic_add_unless(&ss->cur, -1, 0))) - while (atomic_read(&ss->cur) == 0) - cpu_relax(); + unsigned long t = ia64_fetchadd(1, &ss->ticket, acq), serve; + + if (time_before(t, ss->serve)) + return; + + ia64_invala(); + + for (;;) { + asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory"); + if (time_before(t, serve)) + return; + cpu_relax(); + } } static inline void up_spin(struct spinaphore *ss) { - atomic_add(1, &ss->cur); + ia64_fetchadd(1, &ss->serve, rel); } static struct spinaphore ptcg_sem; -- GitLab From e33497aaaef5ec9998cf7b007b13d74bb41be74e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 13:32:38 +1000 Subject: [PATCH 0014/1165] drm/radeon/kms: don't refuse LUT because no framebuffer. The fb binding might be happening in a subsequent crtc setup call. gets rid of some lut issues. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 3655d91993a..b8f234497ac 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -137,9 +137,6 @@ static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, if (size != 256) { return; } - if (crtc->fb == NULL) { - return; - } /* userspace palettes are always correct as is */ for (i = 0; i < 256; i++) { @@ -147,7 +144,6 @@ static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, radeon_crtc->lut_g[i] = green[i] >> 6; radeon_crtc->lut_b[i] = blue[i] >> 6; } - radeon_crtc_load_lut(crtc); } -- GitLab From f30f37def4c72e5df8d949022b806e5a4e99bbcb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 8 Oct 2009 10:44:09 +0200 Subject: [PATCH 0015/1165] drm/radeon/kms: Update memory bandwidth requirements in mode_set_base hook. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The hook may change the number of bytes per pixel being scanned out, which affects the CRTC memory bandwidth requirements. E.g. booting in 8bpp and then running X in 32bpp would result in the bandwidth requirements being underestimated for the latter and consequently in CRTC FIFO underruns causing visible artifacts with 3D intensive workloads. ATOM changes only compile-tested. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 5 ++++- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 7 ++++--- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 14fa9701aeb..38a87cc6eb1 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -563,6 +563,10 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, radeon_fb = to_radeon_framebuffer(old_fb); radeon_gem_object_unpin(radeon_fb->obj); } + + /* Bytes per pixel may have changed */ + radeon_bandwidth_update(rdev); + return 0; } @@ -701,7 +705,6 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, } atombios_overscan_setup(crtc, mode, adjusted_mode); atombios_scaler_setup(crtc); - radeon_bandwidth_update(rdev); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 36410f85d70..ec2df739c11 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -532,6 +532,10 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, radeon_fb = to_radeon_framebuffer(old_fb); radeon_gem_object_unpin(radeon_fb->obj); } + + /* Bytes per pixel may have changed */ + radeon_bandwidth_update(rdev); + return 0; } @@ -1015,14 +1019,11 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); - struct drm_device *dev = crtc->dev; - struct radeon_device *rdev = dev->dev_private; /* TODO TV */ radeon_crtc_set_base(crtc, x, y, old_fb); radeon_set_crtc_timing(crtc, adjusted_mode); radeon_set_pll(crtc, adjusted_mode); - radeon_bandwidth_update(rdev); if (radeon_crtc->crtc_id == 0) { radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode); } else { -- GitLab From b5fc901002db0519093ec723fd98969bc03cd629 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 8 Oct 2009 10:44:10 +0200 Subject: [PATCH 0016/1165] drm/radeon/kms: Fix apparent typo in legacy CRTC memory bandwidth calculation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While investigating the cause of CRTC FIFO underruns, I noticed that when converting the memory bandwidth calculation from the userspace X driver code, an instance of '8.0' was apparently accidentally converted to '80'. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 374ecacc618..33198dd5706 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2350,7 +2350,7 @@ void r100_bandwidth_update(struct radeon_device *rdev) /* Find the total latency for the display data. */ - disp_latency_overhead.full = rfixed_const(80); + disp_latency_overhead.full = rfixed_const(8); disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff); mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full; mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full; -- GitLab From 2ffb842948ba64b03986f4064140a74c1780c44b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:02:19 -0400 Subject: [PATCH 0017/1165] drm/radeon/kms: make sure LVDS panel is valid in detect() If the panel data is bogus this can lead to problems later when the hardware trys to set the mode. If the data is invalid, report LVDS as disconnected. Should fix fdo bug 24247. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e376be47a4a..466f6010a2e 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -415,8 +415,20 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector, static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector) { - enum drm_connector_status ret = connector_status_connected; + enum drm_connector_status ret = connector_status_disconnected; + struct drm_encoder *encoder = radeon_best_single_encoder(connector); + + if (encoder) { + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + + /* check if panel is valid */ + if (native_mode->panel_xres >= 320 && native_mode->panel_yres >= 240) + ret = connector_status_connected; + + } /* check acpi lid status ??? */ + radeon_connector_update_scratch_regs(connector, ret); return ret; } -- GitLab From 5f9a0eb5af16906cd31fc3e02746aa3d61fd3aa9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:08:29 -0400 Subject: [PATCH 0018/1165] drm/radeon/kms/atom: reorder crtc dpms Based on recommendation from bios docs. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 38a87cc6eb1..0a5082af3cd 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -248,18 +248,18 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) switch (mode) { case DRM_MODE_DPMS_ON: + atombios_enable_crtc(crtc, 1); if (ASIC_IS_DCE3(rdev)) atombios_enable_crtc_memreq(crtc, 1); - atombios_enable_crtc(crtc, 1); atombios_blank_crtc(crtc, 0); break; case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: atombios_blank_crtc(crtc, 1); - atombios_enable_crtc(crtc, 0); if (ASIC_IS_DCE3(rdev)) atombios_enable_crtc_memreq(crtc, 0); + atombios_enable_crtc(crtc, 0); break; } -- GitLab From 2606c88608122339cbd5c6b5c149a2eb74ccfe9e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:36:21 -0400 Subject: [PATCH 0019/1165] drm/radeon/kms/atom: add support for AdjustDisplayPll DCE3+ has an AdjustDisplayPll that will adjust the pixel clock accordingly based on the encoder/transmitter to handle special hw requirements. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 36 +++++++++++++++++++++----- 1 file changed, 30 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 0a5082af3cd..d5e6f3da116 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -333,12 +333,13 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) struct drm_encoder *encoder = NULL; struct radeon_encoder *radeon_encoder = NULL; uint8_t frev, crev; - int index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); + int index; SET_PIXEL_CLOCK_PS_ALLOCATION args; PIXEL_CLOCK_PARAMETERS *spc1_ptr; PIXEL_CLOCK_PARAMETERS_V2 *spc2_ptr; PIXEL_CLOCK_PARAMETERS_V3 *spc3_ptr; - uint32_t sclock = mode->clock; + uint32_t pll_clock = mode->clock; + uint32_t adjusted_clock; uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0; struct radeon_pll *pll; int pll_flags = 0; @@ -393,12 +394,34 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } } + /* DCE3+ has an AdjustDisplayPll that will adjust the pixel clock + * accordingly based on the encoder/transmitter to work around + * special hw requirements. + */ + if (ASIC_IS_DCE3(rdev)) { + ADJUST_DISPLAY_PLL_PS_ALLOCATION adjust_pll_args; + + if (!encoder) + return; + + memset(&adjust_pll_args, 0, sizeof(adjust_pll_args)); + adjust_pll_args.usPixelClock = cpu_to_le16(mode->clock / 10); + adjust_pll_args.ucTransmitterID = radeon_encoder->encoder_id; + adjust_pll_args.ucEncodeMode = atombios_get_encoder_mode(encoder); + + index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll); + atom_execute_table(rdev->mode_info.atom_context, + index, (uint32_t *)&adjust_pll_args); + adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10; + } else + adjusted_clock = mode->clock; + if (radeon_crtc->crtc_id == 0) pll = &rdev->clock.p1pll; else pll = &rdev->clock.p2pll; - radeon_compute_pll(pll, mode->clock, &sclock, &fb_div, &frac_fb_div, + radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div, pll_flags); atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, @@ -409,7 +432,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) switch (crev) { case 1: spc1_ptr = (PIXEL_CLOCK_PARAMETERS *) & args.sPCLKInput; - spc1_ptr->usPixelClock = cpu_to_le16(sclock); + spc1_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc1_ptr->usRefDiv = cpu_to_le16(ref_div); spc1_ptr->usFbDiv = cpu_to_le16(fb_div); spc1_ptr->ucFracFbDiv = frac_fb_div; @@ -422,7 +445,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) case 2: spc2_ptr = (PIXEL_CLOCK_PARAMETERS_V2 *) & args.sPCLKInput; - spc2_ptr->usPixelClock = cpu_to_le16(sclock); + spc2_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc2_ptr->usRefDiv = cpu_to_le16(ref_div); spc2_ptr->usFbDiv = cpu_to_le16(fb_div); spc2_ptr->ucFracFbDiv = frac_fb_div; @@ -437,7 +460,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) return; spc3_ptr = (PIXEL_CLOCK_PARAMETERS_V3 *) & args.sPCLKInput; - spc3_ptr->usPixelClock = cpu_to_le16(sclock); + spc3_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc3_ptr->usRefDiv = cpu_to_le16(ref_div); spc3_ptr->usFbDiv = cpu_to_le16(fb_div); spc3_ptr->ucFracFbDiv = frac_fb_div; @@ -460,6 +483,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } printk("executing set pll\n"); + index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -- GitLab From 5a9bcacc0a56f0d9577494e834519480018a6cc3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 15:09:31 -0400 Subject: [PATCH 0020/1165] drm/radeon/kms/atom: rework crtc modeset - clean up tv timing handling - unify SetCRTC_Timing and SetCRTC_UsingDTDTiming Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 221 +++++++---------------- drivers/gpu/drm/radeon/radeon_atombios.c | 93 ++++++---- drivers/gpu/drm/radeon/radeon_encoders.c | 18 ++ 3 files changed, 148 insertions(+), 184 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index d5e6f3da116..7522af1b9e4 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -270,59 +270,89 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) static void atombios_set_crtc_dtd_timing(struct drm_crtc *crtc, - SET_CRTC_USING_DTD_TIMING_PARAMETERS * crtc_param) + struct drm_display_mode *mode) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - SET_CRTC_USING_DTD_TIMING_PARAMETERS conv_param; + SET_CRTC_USING_DTD_TIMING_PARAMETERS args; int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_UsingDTDTiming); + u16 misc = 0; - conv_param.usH_Size = cpu_to_le16(crtc_param->usH_Size); - conv_param.usH_Blanking_Time = - cpu_to_le16(crtc_param->usH_Blanking_Time); - conv_param.usV_Size = cpu_to_le16(crtc_param->usV_Size); - conv_param.usV_Blanking_Time = - cpu_to_le16(crtc_param->usV_Blanking_Time); - conv_param.usH_SyncOffset = cpu_to_le16(crtc_param->usH_SyncOffset); - conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth); - conv_param.usV_SyncOffset = cpu_to_le16(crtc_param->usV_SyncOffset); - conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth); - conv_param.susModeMiscInfo.usAccess = - cpu_to_le16(crtc_param->susModeMiscInfo.usAccess); - conv_param.ucCRTC = crtc_param->ucCRTC; + memset(&args, 0, sizeof(args)); + args.usH_Size = cpu_to_le16(mode->crtc_hdisplay); + args.usH_Blanking_Time = + cpu_to_le16(mode->crtc_hblank_end - mode->crtc_hdisplay); + args.usV_Size = cpu_to_le16(mode->crtc_vdisplay); + args.usV_Blanking_Time = + cpu_to_le16(mode->crtc_vblank_end - mode->crtc_vdisplay); + args.usH_SyncOffset = + cpu_to_le16(mode->crtc_hsync_start - mode->crtc_hdisplay); + args.usH_SyncWidth = + cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start); + args.usV_SyncOffset = + cpu_to_le16(mode->crtc_vsync_start - mode->crtc_vdisplay); + args.usV_SyncWidth = + cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start); + /*args.ucH_Border = mode->hborder;*/ + /*args.ucV_Border = mode->vborder;*/ + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + misc |= ATOM_VSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + misc |= ATOM_HSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_CSYNC) + misc |= ATOM_COMPOSITESYNC; + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + misc |= ATOM_INTERLACE; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + misc |= ATOM_DOUBLE_CLOCK_MODE; + + args.susModeMiscInfo.usAccess = cpu_to_le16(misc); + args.ucCRTC = radeon_crtc->crtc_id; printk("executing set crtc dtd timing\n"); - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -void atombios_crtc_set_timing(struct drm_crtc *crtc, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION * - crtc_param) +static void atombios_crtc_set_timing(struct drm_crtc *crtc, + struct drm_display_mode *mode) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION conv_param; + SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION args; int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_Timing); + u16 misc = 0; - conv_param.usH_Total = cpu_to_le16(crtc_param->usH_Total); - conv_param.usH_Disp = cpu_to_le16(crtc_param->usH_Disp); - conv_param.usH_SyncStart = cpu_to_le16(crtc_param->usH_SyncStart); - conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth); - conv_param.usV_Total = cpu_to_le16(crtc_param->usV_Total); - conv_param.usV_Disp = cpu_to_le16(crtc_param->usV_Disp); - conv_param.usV_SyncStart = cpu_to_le16(crtc_param->usV_SyncStart); - conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth); - conv_param.susModeMiscInfo.usAccess = - cpu_to_le16(crtc_param->susModeMiscInfo.usAccess); - conv_param.ucCRTC = crtc_param->ucCRTC; - conv_param.ucOverscanRight = crtc_param->ucOverscanRight; - conv_param.ucOverscanLeft = crtc_param->ucOverscanLeft; - conv_param.ucOverscanBottom = crtc_param->ucOverscanBottom; - conv_param.ucOverscanTop = crtc_param->ucOverscanTop; - conv_param.ucReserved = crtc_param->ucReserved; + memset(&args, 0, sizeof(args)); + args.usH_Total = cpu_to_le16(mode->crtc_htotal); + args.usH_Disp = cpu_to_le16(mode->crtc_hdisplay); + args.usH_SyncStart = cpu_to_le16(mode->crtc_hsync_start); + args.usH_SyncWidth = + cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start); + args.usV_Total = cpu_to_le16(mode->crtc_vtotal); + args.usV_Disp = cpu_to_le16(mode->crtc_vdisplay); + args.usV_SyncStart = cpu_to_le16(mode->crtc_vsync_start); + args.usV_SyncWidth = + cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start); + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + misc |= ATOM_VSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + misc |= ATOM_HSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_CSYNC) + misc |= ATOM_COMPOSITESYNC; + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + misc |= ATOM_INTERLACE; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + misc |= ATOM_DOUBLE_CLOCK_MODE; + + args.susModeMiscInfo.usAccess = cpu_to_le16(misc); + args.ucCRTC = radeon_crtc->crtc_id; printk("executing set crtc timing\n"); - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) @@ -602,128 +632,17 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - struct drm_encoder *encoder; - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION crtc_timing; - int need_tv_timings = 0; - bool ret; /* TODO color tiling */ - memset(&crtc_timing, 0, sizeof(crtc_timing)); - - list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - /* find tv std */ - if (encoder->crtc == crtc) { - struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - - if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { - struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; - if (tv_dac) { - if (tv_dac->tv_std == TV_STD_NTSC || - tv_dac->tv_std == TV_STD_NTSC_J || - tv_dac->tv_std == TV_STD_PAL_M) - need_tv_timings = 1; - else - need_tv_timings = 2; - break; - } - } - } - } - - crtc_timing.ucCRTC = radeon_crtc->crtc_id; - if (need_tv_timings) { - ret = radeon_atom_get_tv_timings(rdev, need_tv_timings - 1, - &crtc_timing, &adjusted_mode->clock); - if (ret == false) - need_tv_timings = 0; - } - - if (!need_tv_timings) { - crtc_timing.usH_Total = adjusted_mode->crtc_htotal; - crtc_timing.usH_Disp = adjusted_mode->crtc_hdisplay; - crtc_timing.usH_SyncStart = adjusted_mode->crtc_hsync_start; - crtc_timing.usH_SyncWidth = - adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start; - - crtc_timing.usV_Total = adjusted_mode->crtc_vtotal; - crtc_timing.usV_Disp = adjusted_mode->crtc_vdisplay; - crtc_timing.usV_SyncStart = adjusted_mode->crtc_vsync_start; - crtc_timing.usV_SyncWidth = - adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_VSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_HSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_COMPOSITESYNC; - - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_INTERLACE; - - if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_DOUBLE_CLOCK_MODE; - } atombios_crtc_set_pll(crtc, adjusted_mode); - atombios_crtc_set_timing(crtc, &crtc_timing); + atombios_crtc_set_timing(crtc, adjusted_mode); if (ASIC_IS_AVIVO(rdev)) atombios_crtc_set_base(crtc, x, y, old_fb); else { - if (radeon_crtc->crtc_id == 0) { - SET_CRTC_USING_DTD_TIMING_PARAMETERS crtc_dtd_timing; - memset(&crtc_dtd_timing, 0, sizeof(crtc_dtd_timing)); - - /* setup FP shadow regs on R4xx */ - crtc_dtd_timing.ucCRTC = radeon_crtc->crtc_id; - crtc_dtd_timing.usH_Size = adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_Size = adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_Blanking_Time = - adjusted_mode->crtc_hblank_end - - adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_Blanking_Time = - adjusted_mode->crtc_vblank_end - - adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_SyncOffset = - adjusted_mode->crtc_hsync_start - - adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_SyncOffset = - adjusted_mode->crtc_vsync_start - - adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_SyncWidth = - adjusted_mode->crtc_hsync_end - - adjusted_mode->crtc_hsync_start; - crtc_dtd_timing.usV_SyncWidth = - adjusted_mode->crtc_vsync_end - - adjusted_mode->crtc_vsync_start; - /* crtc_dtd_timing.ucH_Border = adjusted_mode->crtc_hborder; */ - /* crtc_dtd_timing.ucV_Border = adjusted_mode->crtc_vborder; */ - - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_VSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_HSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_COMPOSITESYNC; - - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_INTERLACE; - - if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_DOUBLE_CLOCK_MODE; - - atombios_set_crtc_dtd_timing(crtc, &crtc_dtd_timing); - } + if (radeon_crtc->crtc_id == 0) + atombios_set_crtc_dtd_timing(crtc, adjusted_mode); radeon_crtc_set_base(crtc, x, y, old_fb); radeon_legacy_atom_set_surface(crtc); } diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 5b6c08cee40..979ddfdf209 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -857,8 +857,7 @@ radeon_atombios_get_primary_dac_info(struct radeon_encoder *encoder) } bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *crtc_timing, - int32_t *pixel_clock) + struct drm_display_mode *mode) { struct radeon_mode_info *mode_info = &rdev->mode_info; ATOM_ANALOG_TV_INFO *tv_info; @@ -866,7 +865,7 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, ATOM_DTD_FORMAT *dtd_timings; int data_index = GetIndexIntoMasterTable(DATA, AnalogTV_Info); u8 frev, crev; - uint16_t data_offset; + u16 data_offset, misc; atom_parse_data_header(mode_info->atom_context, data_index, NULL, &frev, &crev, &data_offset); @@ -876,28 +875,37 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, if (index > MAX_SUPPORTED_TV_TIMING) return false; - crtc_timing->usH_Total = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total); - crtc_timing->usH_Disp = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Disp); - crtc_timing->usH_SyncStart = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart); - crtc_timing->usH_SyncWidth = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncWidth); - - crtc_timing->usV_Total = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Total); - crtc_timing->usV_Disp = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Disp); - crtc_timing->usV_SyncStart = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart); - crtc_timing->usV_SyncWidth = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncWidth); - - crtc_timing->susModeMiscInfo = tv_info->aModeTimings[index].susModeMiscInfo; - - crtc_timing->ucOverscanRight = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanRight); - crtc_timing->ucOverscanLeft = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanLeft); - crtc_timing->ucOverscanBottom = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanBottom); - crtc_timing->ucOverscanTop = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanTop); - *pixel_clock = le16_to_cpu(tv_info->aModeTimings[index].usPixelClock) * 10; + mode->crtc_htotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total); + mode->crtc_hdisplay = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Disp); + mode->crtc_hsync_start = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart); + mode->crtc_hsync_end = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart) + + le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncWidth); + + mode->crtc_vtotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Total); + mode->crtc_vdisplay = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Disp); + mode->crtc_vsync_start = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart); + mode->crtc_vsync_end = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart) + + le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncWidth); + + mode->flags = 0; + misc = le16_to_cpu(tv_info->aModeTimings[index].susModeMiscInfo.usAccess); + if (misc & ATOM_VSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NVSYNC; + if (misc & ATOM_HSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NHSYNC; + if (misc & ATOM_COMPOSITESYNC) + mode->flags |= DRM_MODE_FLAG_CSYNC; + if (misc & ATOM_INTERLACE) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + if (misc & ATOM_DOUBLE_CLOCK_MODE) + mode->flags |= DRM_MODE_FLAG_DBLSCAN; + + mode->clock = le16_to_cpu(tv_info->aModeTimings[index].usPixelClock) * 10; if (index == 1) { /* PAL timings appear to have wrong values for totals */ - crtc_timing->usH_Total -= 1; - crtc_timing->usV_Total -= 1; + mode->crtc_htotal -= 1; + mode->crtc_vtotal -= 1; } break; case 2: @@ -906,17 +914,36 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, return false; dtd_timings = &tv_info_v1_2->aModeTimings[index]; - crtc_timing->usH_Total = le16_to_cpu(dtd_timings->usHActive) + le16_to_cpu(dtd_timings->usHBlanking_Time); - crtc_timing->usH_Disp = le16_to_cpu(dtd_timings->usHActive); - crtc_timing->usH_SyncStart = le16_to_cpu(dtd_timings->usHActive) + le16_to_cpu(dtd_timings->usHSyncOffset); - crtc_timing->usH_SyncWidth = le16_to_cpu(dtd_timings->usHSyncWidth); - crtc_timing->usV_Total = le16_to_cpu(dtd_timings->usVActive) + le16_to_cpu(dtd_timings->usVBlanking_Time); - crtc_timing->usV_Disp = le16_to_cpu(dtd_timings->usVActive); - crtc_timing->usV_SyncStart = le16_to_cpu(dtd_timings->usVActive) + le16_to_cpu(dtd_timings->usVSyncOffset); - crtc_timing->usV_SyncWidth = le16_to_cpu(dtd_timings->usVSyncWidth); - - crtc_timing->susModeMiscInfo.usAccess = le16_to_cpu(dtd_timings->susModeMiscInfo.usAccess); - *pixel_clock = le16_to_cpu(dtd_timings->usPixClk) * 10; + mode->crtc_htotal = le16_to_cpu(dtd_timings->usHActive) + + le16_to_cpu(dtd_timings->usHBlanking_Time); + mode->crtc_hdisplay = le16_to_cpu(dtd_timings->usHActive); + mode->crtc_hsync_start = le16_to_cpu(dtd_timings->usHActive) + + le16_to_cpu(dtd_timings->usHSyncOffset); + mode->crtc_hsync_end = mode->crtc_hsync_start + + le16_to_cpu(dtd_timings->usHSyncWidth); + + mode->crtc_vtotal = le16_to_cpu(dtd_timings->usVActive) + + le16_to_cpu(dtd_timings->usVBlanking_Time); + mode->crtc_vdisplay = le16_to_cpu(dtd_timings->usVActive); + mode->crtc_vsync_start = le16_to_cpu(dtd_timings->usVActive) + + le16_to_cpu(dtd_timings->usVSyncOffset); + mode->crtc_vsync_end = mode->crtc_vsync_start + + le16_to_cpu(dtd_timings->usVSyncWidth); + + mode->flags = 0; + misc = le16_to_cpu(dtd_timings->susModeMiscInfo.usAccess); + if (misc & ATOM_VSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NVSYNC; + if (misc & ATOM_HSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NHSYNC; + if (misc & ATOM_COMPOSITESYNC) + mode->flags |= DRM_MODE_FLAG_CSYNC; + if (misc & ATOM_INTERLACE) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + if (misc & ATOM_DOUBLE_CLOCK_MODE) + mode->flags |= DRM_MODE_FLAG_DBLSCAN; + + mode->clock = le16_to_cpu(dtd_timings->usPixClk) * 10; break; } return true; diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index a65ab1a0dad..3e58c6eccea 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -31,6 +31,10 @@ extern int atom_debug; +/* evil but including atombios.h is much worse */ +bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, + struct drm_display_mode *mode); + uint32_t radeon_get_encoder_id(struct drm_device *dev, uint32_t supported_device, uint8_t dac) { @@ -219,6 +223,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *adjusted_mode) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; drm_mode_set_crtcinfo(adjusted_mode, 0); @@ -230,6 +236,18 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2))) adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2; + if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { + struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; + if (tv_dac) { + if (tv_dac->tv_std == TV_STD_NTSC || + tv_dac->tv_std == TV_STD_NTSC_J || + tv_dac->tv_std == TV_STD_PAL_M) + radeon_atom_get_tv_timings(rdev, 0, adjusted_mode); + else + radeon_atom_get_tv_timings(rdev, 1, adjusted_mode); + } + } + return true; } -- GitLab From de2103e452ec7f2db5db7c44279735688608381d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 9 Oct 2009 15:14:30 -0400 Subject: [PATCH 0021/1165] drm/radeon/kms: use drm_mode directly for panel modes This reduces the number of mode format conversions needed and makes native panel mode support cleaner. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 32 ++++++----- drivers/gpu/drm/radeon/radeon_combios.c | 64 ++++++++++----------- drivers/gpu/drm/radeon/radeon_connectors.c | 55 ++++++------------ drivers/gpu/drm/radeon/radeon_display.c | 6 +- drivers/gpu/drm/radeon/radeon_encoders.c | 50 +++------------- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 30 +++++----- drivers/gpu/drm/radeon/radeon_mode.h | 19 ++---- 7 files changed, 97 insertions(+), 159 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 979ddfdf209..79d4b771c77 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -798,27 +798,29 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct if (!lvds) return NULL; - lvds->native_mode.dotclock = + lvds->native_mode.clock = le16_to_cpu(lvds_info->info.sLCDTiming.usPixClk) * 10; - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = le16_to_cpu(lvds_info->info.sLCDTiming.usHActive); - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = le16_to_cpu(lvds_info->info.sLCDTiming.usVActive); - lvds->native_mode.hblank = - le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time); - lvds->native_mode.hoverplus = - le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset); - lvds->native_mode.hsync_width = - le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth); - lvds->native_mode.vblank = - le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time); - lvds->native_mode.voverplus = - le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncOffset); - lvds->native_mode.vsync_width = - le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); + lvds->native_mode.htotal = lvds->native_mode.hdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time); + lvds->native_mode.hsync_start = lvds->native_mode.hdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset); + lvds->native_mode.hsync_end = lvds->native_mode.hsync_start + + le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth); + lvds->native_mode.vtotal = lvds->native_mode.vdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time); + lvds->native_mode.vsync_start = lvds->native_mode.vdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); + lvds->native_mode.vsync_end = lvds->native_mode.vsync_start + + le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); lvds->panel_pwr_delay = le16_to_cpu(lvds_info->info.usOffDelayInMs); lvds->lvds_misc = lvds_info->info.ucLVDS_Misc; + /* set crtc values */ + drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); encoder->native_mode = lvds->native_mode; } diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 748265a105b..e91aba8530b 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -808,25 +808,25 @@ static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct lvds->panel_blon_delay = (lvds_ss_gen_cntl >> RADEON_LVDS_PWRSEQ_DELAY2_SHIFT) & 0xf; if (fp_vert_stretch & RADEON_VERT_STRETCH_ENABLE) - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = ((fp_vert_stretch & RADEON_VERT_PANEL_SIZE) >> RADEON_VERT_PANEL_SHIFT) + 1; else - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = (RREG32(RADEON_CRTC_V_TOTAL_DISP) >> 16) + 1; if (fp_horz_stretch & RADEON_HORZ_STRETCH_ENABLE) - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = (((fp_horz_stretch & RADEON_HORZ_PANEL_SIZE) >> RADEON_HORZ_PANEL_SHIFT) + 1) * 8; else - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = ((RREG32(RADEON_CRTC_H_TOTAL_DISP) >> 16) + 1) * 8; - if ((lvds->native_mode.panel_xres < 640) || - (lvds->native_mode.panel_yres < 480)) { - lvds->native_mode.panel_xres = 640; - lvds->native_mode.panel_yres = 480; + if ((lvds->native_mode.hdisplay < 640) || + (lvds->native_mode.vdisplay < 480)) { + lvds->native_mode.hdisplay = 640; + lvds->native_mode.vdisplay = 480; } ppll_div_sel = RREG8(RADEON_CLOCK_CNTL_INDEX + 1) & 0x3; @@ -846,8 +846,8 @@ static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct lvds->panel_vcc_delay = 200; DRM_INFO("Panel info derived from registers\n"); - DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres, - lvds->native_mode.panel_yres); + DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.hdisplay, + lvds->native_mode.vdisplay); return lvds; } @@ -882,11 +882,11 @@ struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder DRM_INFO("Panel ID String: %s\n", stmp); - lvds->native_mode.panel_xres = RBIOS16(lcd_info + 0x19); - lvds->native_mode.panel_yres = RBIOS16(lcd_info + 0x1b); + lvds->native_mode.hdisplay = RBIOS16(lcd_info + 0x19); + lvds->native_mode.vdisplay = RBIOS16(lcd_info + 0x1b); - DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres, - lvds->native_mode.panel_yres); + DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.hdisplay, + lvds->native_mode.vdisplay); lvds->panel_vcc_delay = RBIOS16(lcd_info + 0x2c); if (lvds->panel_vcc_delay > 2000 || lvds->panel_vcc_delay < 0) @@ -944,27 +944,25 @@ struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder if (tmp == 0) break; - if ((RBIOS16(tmp) == lvds->native_mode.panel_xres) && + if ((RBIOS16(tmp) == lvds->native_mode.hdisplay) && (RBIOS16(tmp + 2) == - lvds->native_mode.panel_yres)) { - lvds->native_mode.hblank = - (RBIOS16(tmp + 17) - RBIOS16(tmp + 19)) * 8; - lvds->native_mode.hoverplus = - (RBIOS16(tmp + 21) - RBIOS16(tmp + 19) - - 1) * 8; - lvds->native_mode.hsync_width = - RBIOS8(tmp + 23) * 8; - - lvds->native_mode.vblank = (RBIOS16(tmp + 24) - - RBIOS16(tmp + 26)); - lvds->native_mode.voverplus = - ((RBIOS16(tmp + 28) & 0x7ff) - - RBIOS16(tmp + 26)); - lvds->native_mode.vsync_width = - ((RBIOS16(tmp + 28) & 0xf800) >> 11); - lvds->native_mode.dotclock = - RBIOS16(tmp + 9) * 10; + lvds->native_mode.vdisplay)) { + lvds->native_mode.htotal = RBIOS16(tmp + 17) * 8; + lvds->native_mode.hsync_start = RBIOS16(tmp + 21) * 8; + lvds->native_mode.hsync_end = (RBIOS8(tmp + 23) + + RBIOS16(tmp + 21)) * 8; + + lvds->native_mode.vtotal = RBIOS16(tmp + 24); + lvds->native_mode.vsync_start = RBIOS16(tmp + 28) & 0x7ff; + lvds->native_mode.vsync_end = + ((RBIOS16(tmp + 28) & 0xf800) >> 11) + + (RBIOS16(tmp + 28) & 0x7ff); + + lvds->native_mode.clock = RBIOS16(tmp + 9) * 10; lvds->native_mode.flags = 0; + /* set crtc values */ + drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); + } } } else { diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 466f6010a2e..da3a049e364 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -178,25 +178,13 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode struct drm_device *dev = encoder->dev; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_display_mode *mode = NULL; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; - if (native_mode->panel_xres != 0 && - native_mode->panel_yres != 0 && - native_mode->dotclock != 0) { + if (native_mode->hdisplay != 0 && + native_mode->vdisplay != 0 && + native_mode->clock != 0) { mode = drm_mode_create(dev); - - mode->hdisplay = native_mode->panel_xres; - mode->vdisplay = native_mode->panel_yres; - - mode->htotal = mode->hdisplay + native_mode->hblank; - mode->hsync_start = mode->hdisplay + native_mode->hoverplus; - mode->hsync_end = mode->hsync_start + native_mode->hsync_width; - mode->vtotal = mode->vdisplay + native_mode->vblank; - mode->vsync_start = mode->vdisplay + native_mode->voverplus; - mode->vsync_end = mode->vsync_start + native_mode->vsync_width; - mode->clock = native_mode->dotclock; - mode->flags = 0; - + *mode = *native_mode; mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; drm_mode_set_name(mode); @@ -210,7 +198,7 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn struct drm_device *dev = encoder->dev; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_display_mode *mode = NULL; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; int i; struct mode_size { int w; @@ -237,10 +225,10 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn for (i = 0; i < 17; i++) { if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - if (common_modes[i].w > native_mode->panel_xres || - common_modes[i].h > native_mode->panel_yres || - (common_modes[i].w == native_mode->panel_xres && - common_modes[i].h == native_mode->panel_yres)) + if (common_modes[i].w > native_mode->hdisplay || + common_modes[i].h > native_mode->vdisplay || + (common_modes[i].w == native_mode->hdisplay && + common_modes[i].h == native_mode->vdisplay)) continue; } if (common_modes[i].w < 320 || common_modes[i].h < 200) @@ -344,28 +332,23 @@ static void radeon_fixup_lvds_native_mode(struct drm_encoder *encoder, struct drm_connector *connector) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; /* Try to get native mode details from EDID if necessary */ - if (!native_mode->dotclock) { + if (!native_mode->clock) { struct drm_display_mode *t, *mode; list_for_each_entry_safe(mode, t, &connector->probed_modes, head) { - if (mode->hdisplay == native_mode->panel_xres && - mode->vdisplay == native_mode->panel_yres) { - native_mode->hblank = mode->htotal - mode->hdisplay; - native_mode->hoverplus = mode->hsync_start - mode->hdisplay; - native_mode->hsync_width = mode->hsync_end - mode->hsync_start; - native_mode->vblank = mode->vtotal - mode->vdisplay; - native_mode->voverplus = mode->vsync_start - mode->vdisplay; - native_mode->vsync_width = mode->vsync_end - mode->vsync_start; - native_mode->dotclock = mode->clock; + if (mode->hdisplay == native_mode->hdisplay && + mode->vdisplay == native_mode->vdisplay) { + *native_mode = *mode; + drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V); DRM_INFO("Determined LVDS native mode details from EDID\n"); break; } } } - if (!native_mode->dotclock) { + if (!native_mode->clock) { DRM_INFO("No LVDS native mode details, disabling RMX\n"); radeon_encoder->rmx_type = RMX_OFF; } @@ -420,10 +403,10 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; /* check if panel is valid */ - if (native_mode->panel_xres >= 320 && native_mode->panel_yres >= 240) + if (native_mode->hdisplay >= 320 && native_mode->vdisplay >= 240) ret = connector_status_connected; } diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index b8f234497ac..a20bf43389b 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -761,7 +761,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, radeon_crtc->rmx_type = radeon_encoder->rmx_type; memcpy(&radeon_crtc->native_mode, &radeon_encoder->native_mode, - sizeof(struct radeon_native_mode)); + sizeof(struct drm_display_mode)); first = false; } else { if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) { @@ -779,10 +779,10 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, if (radeon_crtc->rmx_type != RMX_OFF) { fixed20_12 a, b; a.full = rfixed_const(crtc->mode.vdisplay); - b.full = rfixed_const(radeon_crtc->native_mode.panel_xres); + b.full = rfixed_const(radeon_crtc->native_mode.hdisplay); radeon_crtc->vsc.full = rfixed_div(a, b); a.full = rfixed_const(crtc->mode.hdisplay); - b.full = rfixed_const(radeon_crtc->native_mode.panel_yres); + b.full = rfixed_const(radeon_crtc->native_mode.vdisplay); radeon_crtc->hsc.full = rfixed_div(a, b); } else { radeon_crtc->vsc.full = rfixed_const(1); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 3e58c6eccea..a9d4e0ab049 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -171,49 +171,15 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder, struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; - - if (mode->hdisplay < native_mode->panel_xres || - mode->vdisplay < native_mode->panel_yres) { - if (ASIC_IS_AVIVO(rdev)) { - adjusted_mode->hdisplay = native_mode->panel_xres; - adjusted_mode->vdisplay = native_mode->panel_yres; - adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank; - adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus; - adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width; - adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank; - adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus; - adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width; - /* update crtc values */ - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - /* adjust crtc values */ - adjusted_mode->crtc_hdisplay = native_mode->panel_xres; - adjusted_mode->crtc_vdisplay = native_mode->panel_yres; - adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank; - adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus; - adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width; - adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank; - adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus; - adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width; - } else { - adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank; - adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus; - adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width; - adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank; - adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus; - adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width; - /* update crtc values */ - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - /* adjust crtc values */ - adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank; - adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus; - adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width; - adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank; - adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus; - adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; + + if (mode->hdisplay < native_mode->hdisplay || + mode->vdisplay < native_mode->vdisplay) { + *adjusted_mode = *native_mode; + if (!ASIC_IS_AVIVO(rdev)) { + adjusted_mode->hdisplay = mode->hdisplay; + adjusted_mode->vdisplay = mode->vdisplay; } - adjusted_mode->flags = native_mode->flags; - adjusted_mode->clock = native_mode->dotclock; } } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index ec2df739c11..d22a195cf15 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -48,7 +48,7 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active; u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp; u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp; - struct radeon_native_mode *native_mode = &radeon_crtc->native_mode; + struct drm_display_mode *native_mode = &radeon_crtc->native_mode; fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) & (RADEON_VERT_STRETCH_RESERVED | @@ -95,19 +95,19 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, fp_horz_vert_active = 0; - if (native_mode->panel_xres == 0 || - native_mode->panel_yres == 0) { + if (native_mode->hdisplay == 0 || + native_mode->vdisplay == 0) { hscale = false; vscale = false; } else { - if (xres > native_mode->panel_xres) - xres = native_mode->panel_xres; - if (yres > native_mode->panel_yres) - yres = native_mode->panel_yres; + if (xres > native_mode->hdisplay) + xres = native_mode->hdisplay; + if (yres > native_mode->vdisplay) + yres = native_mode->vdisplay; - if (xres == native_mode->panel_xres) + if (xres == native_mode->hdisplay) hscale = false; - if (yres == native_mode->panel_yres) + if (yres == native_mode->vdisplay) vscale = false; } @@ -119,11 +119,11 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, else { inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0; scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX) - / native_mode->panel_xres + 1; + / native_mode->hdisplay + 1; fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) | RADEON_HORZ_STRETCH_BLEND | RADEON_HORZ_STRETCH_ENABLE | - ((native_mode->panel_xres/8-1) << 16)); + ((native_mode->hdisplay/8-1) << 16)); } if (!vscale) @@ -131,11 +131,11 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, else { inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0; scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX) - / native_mode->panel_yres + 1; + / native_mode->vdisplay + 1; fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) | RADEON_VERT_STRETCH_ENABLE | RADEON_VERT_STRETCH_BLEND | - ((native_mode->panel_yres-1) << 12)); + ((native_mode->vdisplay-1) << 12)); } break; case RMX_CENTER: @@ -175,8 +175,8 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, ? RADEON_CRTC_V_SYNC_POL : 0))); - fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) | - (((native_mode->panel_xres / 8) & 0x1ff) << 16)); + fp_horz_vert_active = (((native_mode->vdisplay) & 0xfff) | + (((native_mode->hdisplay / 8) & 0x1ff) << 16)); break; case RMX_OFF: default: diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index e61226817cc..3d2631be073 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -186,17 +186,6 @@ struct radeon_mode_info { }; -struct radeon_native_mode { - /* preferred mode */ - uint32_t panel_xres, panel_yres; - uint32_t hoverplus, hsync_width; - uint32_t hblank; - uint32_t voverplus, vsync_width; - uint32_t vblank; - uint32_t dotclock; - uint32_t flags; -}; - #define MAX_H_CODE_TIMING_LEN 32 #define MAX_V_CODE_TIMING_LEN 32 @@ -228,7 +217,7 @@ struct radeon_crtc { enum radeon_rmx_type rmx_type; fixed20_12 vsc; fixed20_12 hsc; - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_primary_dac { @@ -248,7 +237,7 @@ struct radeon_encoder_lvds { bool use_bios_dividers; uint32_t lvds_gen_cntl; /* panel mode */ - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_tv_dac { @@ -279,7 +268,7 @@ struct radeon_encoder_atom_dig { uint32_t lvds_misc; uint16_t panel_pwr_delay; /* panel mode */ - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_atom_dac { @@ -294,7 +283,7 @@ struct radeon_encoder { uint32_t flags; uint32_t pixel_clock; enum radeon_rmx_type rmx_type; - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; void *enc_priv; }; -- GitLab From 0549a061b545d232d12836f98c7c4965dd83f837 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 9 Oct 2009 18:41:19 -0400 Subject: [PATCH 0022/1165] drm/radeon/kms: also check for edid in lvds detect In case the system has bad native mode info but valid edid. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index da3a049e364..17d5659cff0 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -398,8 +398,10 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector, static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector) { - enum drm_connector_status ret = connector_status_disconnected; + struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct drm_encoder *encoder = radeon_best_single_encoder(connector); + enum drm_connector_status ret = connector_status_disconnected; + bool dret; if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -410,6 +412,15 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec ret = connector_status_connected; } + + /* check for edid as well */ + if (radeon_connector->ddc_bus) { + radeon_i2c_do_lock(radeon_connector, 1); + dret = radeon_ddc_probe(radeon_connector); + radeon_i2c_do_lock(radeon_connector, 0); + if (dret) + ret = connector_status_connected; + } /* check acpi lid status ??? */ radeon_connector_update_scratch_regs(connector, ret); -- GitLab From ceeb50279b3d05eb7ea2b67e90acb2110d09325f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 13:54:10 +1000 Subject: [PATCH 0023/1165] drm/radeon: Revert "drm/r600: avoid assigning vb twice in blit code" This reverts commit 49c458e544ae14514209ed80ea6829ca1b18ddf0. It seems to have some side effects in the non-kms cases. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit.c | 10 +++++++--- drivers/gpu/drm/radeon/r600_blit_kms.c | 3 +-- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index dec50108160..d988eece018 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -582,6 +582,8 @@ r600_blit_copy(struct drm_device *dev, u64 vb_addr; u32 *vb; + vb = r600_nomm_get_vb_ptr(dev); + if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) { max_bytes = 8192; @@ -617,8 +619,8 @@ r600_blit_copy(struct drm_device *dev, if (!dev_priv->blit_vb) return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); vb[0] = i2f(dst_x); vb[1] = 0; @@ -706,8 +708,8 @@ r600_blit_copy(struct drm_device *dev, return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); vb[0] = i2f(dst_x / 4); vb[1] = 0; @@ -775,6 +777,8 @@ r600_blit_swap(struct drm_device *dev, u64 vb_addr; u32 *vb; + vb = r600_nomm_get_vb_ptr(dev); + if ((dev_priv->blit_vb->used + 48) > dev_priv->blit_vb->total) { r600_nomm_put_vb(dev); @@ -783,8 +787,8 @@ r600_blit_swap(struct drm_device *dev, return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); if (cpp == 4) { cb_format = COLOR_8_8_8_8; diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index 93108bb31d1..acae33e2ad5 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -610,6 +610,7 @@ void r600_kms_blit_copy(struct radeon_device *rdev, DRM_DEBUG("emitting copy %16llx %16llx %d %d\n", src_gpu_addr, dst_gpu_addr, size_bytes, rdev->r600_blit.vb_used); + vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) { max_bytes = 8192; @@ -652,7 +653,6 @@ void r600_kms_blit_copy(struct radeon_device *rdev, vb = r600_nomm_get_vb_ptr(dev); #endif } - vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); vb[0] = i2f(dst_x); vb[1] = 0; @@ -747,7 +747,6 @@ void r600_kms_blit_copy(struct radeon_device *rdev, vb = r600_nomm_get_vb_ptr(dev); } #endif - vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); vb[0] = i2f(dst_x / 4); vb[1] = 0; -- GitLab From 39deb2d67515086f08a672e7574716ca0d3883a5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 14:21:19 +1000 Subject: [PATCH 0024/1165] drm/radeon/kms: fix use of index before proper initialisation. With the adjust table introduction, we need to fill out index before getting the table version. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 7522af1b9e4..3409aa3cbee 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -454,6 +454,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div, pll_flags); + index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev); @@ -513,7 +514,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } printk("executing set pll\n"); - index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -- GitLab From fb06ca8f8c61dfd7cbfa2092756577ff78a26dcd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 12 Oct 2009 11:25:05 -0400 Subject: [PATCH 0025/1165] drm/radeon/kms: properly handle mode id with native mode changes drm modes are objects with indentifiers. Make sure to preserve the mode id when copying mode params. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 3 +-- drivers/gpu/drm/radeon/radeon_encoders.c | 2 ++ 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 17d5659cff0..729207a1e83 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -183,8 +183,7 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode if (native_mode->hdisplay != 0 && native_mode->vdisplay != 0 && native_mode->clock != 0) { - mode = drm_mode_create(dev); - *mode = *native_mode; + mode = drm_mode_duplicate(dev, native_mode); mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; drm_mode_set_name(mode); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index a9d4e0ab049..10845f39124 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -175,11 +175,13 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder, if (mode->hdisplay < native_mode->hdisplay || mode->vdisplay < native_mode->vdisplay) { + int mode_id = adjusted_mode->base.id; *adjusted_mode = *native_mode; if (!ASIC_IS_AVIVO(rdev)) { adjusted_mode->hdisplay = mode->hdisplay; adjusted_mode->vdisplay = mode->vdisplay; } + adjusted_mode->base.id = mode_id; } } -- GitLab From 6153384161222c855bb95ca3eee3b3d89ae2c9dd Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 24 Sep 2009 10:01:53 +0200 Subject: [PATCH 0026/1165] pcm038: Add SPI/MC13783 support Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/pcm038.c | 96 +++++++++++++++++++++++++++++++++++++- 1 file changed, 94 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c index ee65dda584c..906d59b0a7a 100644 --- a/arch/arm/mach-mx2/pcm038.c +++ b/arch/arm/mach-mx2/pcm038.c @@ -23,6 +23,10 @@ #include #include #include +#include +#include +#include +#include #include #include @@ -35,6 +39,7 @@ #include #include #include +#include #include "devices.h" @@ -78,8 +83,6 @@ static int pcm038_pins[] = { PC6_PF_I2C2_SCL, /* SPI1 */ PD25_PF_CSPI1_RDY, - PD27_PF_CSPI1_SS1, - PD28_PF_CSPI1_SS0, PD29_PF_CSPI1_SCLK, PD30_PF_CSPI1_MISO, PD31_PF_CSPI1_MOSI, @@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = { } }; +static int pcm038_spi_cs[] = {GPIO_PORTD + 28}; + +static struct spi_imx_master pcm038_spi_0_data = { + .chipselect = pcm038_spi_cs, + .num_chipselect = ARRAY_SIZE(pcm038_spi_cs), +}; + +static struct regulator_consumer_supply sdhc1_consumers[] = { + { + .dev = &mxc_sdhc_device1.dev, + .supply = "sdhc_vcc", + }, +}; + +static struct regulator_init_data sdhc1_data = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 0, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers), + .consumer_supplies = sdhc1_consumers, +}; + +static struct regulator_consumer_supply cam_consumers[] = { + { + .dev = NULL, + .supply = "imx_cam_vcc", + }, +}; + +static struct regulator_init_data cam_data = { + .constraints = { + .min_uV = 3000000, + .max_uV = 3400000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, + .valid_modes_mask = REGULATOR_MODE_NORMAL | + REGULATOR_MODE_FAST, + .always_on = 0, + .boot_on = 0, + }, + .num_consumer_supplies = ARRAY_SIZE(cam_consumers), + .consumer_supplies = cam_consumers, +}; + +struct mc13783_regulator_init_data pcm038_regulators[] = { + { + .id = MC13783_REGU_VCAM, + .init_data = &cam_data, + }, { + .id = MC13783_REGU_VMMC1, + .init_data = &sdhc1_data, + }, +}; + +static struct mc13783_platform_data pcm038_pmic = { + .regulators = pcm038_regulators, + .num_regulators = ARRAY_SIZE(pcm038_regulators), + .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR | + MC13783_USE_TOUCHSCREEN, +}; + +static struct spi_board_info pcm038_spi_board_info[] __initdata = { + { + .modalias = "mc13783", + .irq = IRQ_GPIOB(23), + .max_speed_hz = 300000, + .bus_num = 0, + .chip_select = 0, + .platform_data = &pcm038_pmic, + .mode = SPI_CS_HIGH, + } +}; + static void __init pcm038_init(void) { mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), @@ -219,6 +302,15 @@ static void __init pcm038_init(void) /* PE18 for user-LED D40 */ mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT); + mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); + + /* MC13783 IRQ */ + mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN); + + mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data); + spi_register_board_info(pcm038_spi_board_info, + ARRAY_SIZE(pcm038_spi_board_info)); + platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); #ifdef CONFIG_MACH_PCM970_BASEBOARD -- GitLab From a90c31a3b70bcef915ffddacb8cbb4e63de33415 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 6 Oct 2009 09:18:17 +0200 Subject: [PATCH 0027/1165] pcm970 mmc: Fix ro switch We have to use mxc_gpio_mode() for the card detection pin instead of mxc_gpio_setup_multiple_pins() because the latter does a gpio_request() and thus a later gpio_request() fails. Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/pcm970-baseboard.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c index c261f59b0b4..3cb7f457e5d 100644 --- a/arch/arm/mach-mx2/pcm970-baseboard.c +++ b/arch/arm/mach-mx2/pcm970-baseboard.c @@ -39,7 +39,6 @@ static int pcm970_pins[] = { PB7_PF_SD2_D3, PB8_PF_SD2_CMD, PB9_PF_SD2_CLK, - GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */ /* display */ PA5_PF_LSCLK, PA6_PF_LD0, @@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void) "PCM970"); mxc_register_device(&mxc_fb_device, &pcm038_fb_data); + mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN); mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata); platform_device_register(&pcm970_sja1000); } -- GitLab From 324c1aa3dfb4235c80df603e761cc06e28a7e903 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 10:00:58 +0200 Subject: [PATCH 0028/1165] fix compilation of i.MX31 platforms mxc_iomux_v3_init() is defined in arch/arm/plat-mxc/iomux-v3.c, which is not linked for i.MX31 and produces an undefined reference error. Fix this by building the offending code only for i.MX35. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c index ad5a1122d76..bedf5b8d976 100644 --- a/arch/arm/mach-mx3/mm.c +++ b/arch/arm/mach-mx3/mm.c @@ -81,6 +81,7 @@ void __init mx31_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +#ifdef CONFIG_ARCH_MX35 void __init mx35_map_io(void) { mxc_set_cpu_type(MXC_CPU_MX35); @@ -89,6 +90,7 @@ void __init mx35_map_io(void) iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc)); } +#endif void __init mx31_init_irq(void) { -- GitLab From d9e8b88478be7c8cd3fab91213c05e6194de294e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 16:49:12 +0200 Subject: [PATCH 0029/1165] fix pcm037_eet compilation with the new SPI driver Fix pcm037_eet compilation with the new imx SPI driver by unifying platform device names. Signed-off-by: Guennadi Liakhovetski Acked-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/devices.c | 24 ++++++++++++------------ arch/arm/mach-mx3/devices.h | 6 +++--- 2 files changed, 15 insertions(+), 15 deletions(-) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 8a577f36725..e6abe181b96 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = { * SPI master controller * 3 channels */ -static struct resource imx_spi_0_resources[] = { +static struct resource mxc_spi_0_resources[] = { { .start = CSPI1_BASE_ADDR, .end = CSPI1_BASE_ADDR + SZ_4K - 1, @@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = { }, }; -static struct resource imx_spi_1_resources[] = { +static struct resource mxc_spi_1_resources[] = { { .start = CSPI2_BASE_ADDR, .end = CSPI2_BASE_ADDR + SZ_4K - 1, @@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = { }, }; -static struct resource imx_spi_2_resources[] = { +static struct resource mxc_spi_2_resources[] = { { .start = CSPI3_BASE_ADDR, .end = CSPI3_BASE_ADDR + SZ_4K - 1, @@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = { }, }; -struct platform_device imx_spi_device0 = { +struct platform_device mxc_spi_device0 = { .name = "spi_imx", .id = 0, - .num_resources = ARRAY_SIZE(imx_spi_0_resources), - .resource = imx_spi_0_resources, + .num_resources = ARRAY_SIZE(mxc_spi_0_resources), + .resource = mxc_spi_0_resources, }; -struct platform_device imx_spi_device1 = { +struct platform_device mxc_spi_device1 = { .name = "spi_imx", .id = 1, - .num_resources = ARRAY_SIZE(imx_spi_1_resources), - .resource = imx_spi_1_resources, + .num_resources = ARRAY_SIZE(mxc_spi_1_resources), + .resource = mxc_spi_1_resources, }; -struct platform_device imx_spi_device2 = { +struct platform_device mxc_spi_device2 = { .name = "spi_imx", .id = 2, - .num_resources = ARRAY_SIZE(imx_spi_2_resources), - .resource = imx_spi_2_resources, + .num_resources = ARRAY_SIZE(mxc_spi_2_resources), + .resource = mxc_spi_2_resources, }; #ifdef CONFIG_ARCH_MX35 diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 79f2be45d13..ab87419dc9a 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host; extern struct platform_device mxc_usbh1; extern struct platform_device mxc_usbh2; extern struct platform_device mxc_rnga_device; -extern struct platform_device imx_spi_device0; -extern struct platform_device imx_spi_device1; -extern struct platform_device imx_spi_device2; +extern struct platform_device mxc_spi_device0; +extern struct platform_device mxc_spi_device1; +extern struct platform_device mxc_spi_device2; -- GitLab From 679bfef0e366109483981899401b98b8a65ed06c Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Thu, 8 Oct 2009 18:12:24 +0200 Subject: [PATCH 0030/1165] MXC: fix reset for mx31, mx35 and mx27 SoCs The clock name for the watchdog devices was not set consistently with mx21 on these platforms, resulting in the reset not to work. Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/mach-mx2/clock_imx27.c | 2 +- arch/arm/mach-mx3/clock-imx35.c | 2 +- arch/arm/mach-mx3/clock.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c index 174fa3e3094..ff5e3329891 100644 --- a/arch/arm/mach-mx2/clock_imx27.c +++ b/arch/arm/mach-mx2/clock_imx27.c @@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "mstick", mstick_clk) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "gpio", gpio_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c index fe5c4217322..c595260ec1f 100644 --- a/arch/arm/mach-mx3/clock-imx35.c +++ b/arch/arm/mach-mx3/clock-imx35.c @@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) - _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "max", max_clk) _REGISTER_CLOCK(NULL, "admux", admux_clk) _REGISTER_CLOCK(NULL, "csi", csi_clk) diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c index 06bd6180bfc..b2a3bcf8266 100644 --- a/arch/arm/mach-mx3/clock.c +++ b/arch/arm/mach-mx3/clock.c @@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) _REGISTER_CLOCK(NULL, "pwm", pwm_clk) - _REGISTER_CLOCK(NULL, "wdog", wdog_clk) + _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk) _REGISTER_CLOCK(NULL, "rtc", rtc_clk) _REGISTER_CLOCK(NULL, "epit", epit1_clk) _REGISTER_CLOCK(NULL, "epit", epit2_clk) -- GitLab From 8e8b2d676f3f7c1246b108793fb5690e6c6fcd26 Mon Sep 17 00:00:00 2001 From: Eero Nurkkala Date: Mon, 12 Oct 2009 08:41:59 +0300 Subject: [PATCH 0031/1165] ASoC: Serialize access to dapm_power_widgets() Access to damp_power_widgets() is assumed to be single-threaded. Concurrent accesses to dapm_power_widgets() may result in unpredictable behavior. Calls from: close_delayed_work() soc_codec_close() soc_pcm_prepare() soc_suspend() soc_resume_deferred() to snd_soc_dapm_stream_event() do not have the codec->mutex taken to cover the call to dapm_power_widgets(). Thus, take the mutex in these paths also to assure single-threaded use of dapm_power_widgets(). Signed-off-by: Eero Nurkkala Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 8de6f9dec4a..d89f6dc0090 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -2072,9 +2072,9 @@ int snd_soc_dapm_stream_event(struct snd_soc_codec *codec, } } } - mutex_unlock(&codec->mutex); dapm_power_widgets(codec, event); + mutex_unlock(&codec->mutex); dump_dapm(codec, __func__); return 0; } -- GitLab From 37e6ba00720c2786330dec2a9a5081e9e049422f Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 2 Oct 2009 13:30:08 -0500 Subject: [PATCH 0032/1165] [SCSI] fix memory leak in initialization The root cause of the problem is the fact that dev_set_name() now allocates storage instead of using the original array within the kobj. That means that the SCSI assumption that if you haven't made the containing object or any sub objects visible, you can just destroy it (and its component devices) lock stock and barrel becomes false. Fix this by doing the get of sdev_dev at parent time and thus do an extra put of it in scsi_destroy_sdev() (and all other destruction without add paths). Reported-by: Tetsuo Handa Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 2 ++ drivers/scsi/scsi_sysfs.c | 7 ++----- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index c4478380140..0547a7f44d4 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -317,6 +317,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget, out_device_destroy: scsi_device_set_state(sdev, SDEV_DEL); transport_destroy_device(&sdev->sdev_gendev); + put_device(&sdev->sdev_dev); put_device(&sdev->sdev_gendev); out: if (display_failure_msg) @@ -957,6 +958,7 @@ static inline void scsi_destroy_sdev(struct scsi_device *sdev) if (sdev->host->hostt->slave_destroy) sdev->host->hostt->slave_destroy(sdev); transport_destroy_device(&sdev->sdev_gendev); + put_device(&sdev->sdev_dev); put_device(&sdev->sdev_gendev); } diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index fde54537d71..5c7eb63a19d 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -864,10 +864,6 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev) goto clean_device; } - /* take a reference for the sdev_dev; this is - * released by the sdev_class .release */ - get_device(&sdev->sdev_gendev); - /* create queue files, which may be writable, depending on the host */ if (sdev->host->hostt->change_queue_depth) error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw); @@ -917,6 +913,7 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev) device_del(&sdev->sdev_gendev); transport_destroy_device(&sdev->sdev_gendev); + put_device(&sdev->sdev_dev); put_device(&sdev->sdev_gendev); return error; @@ -1065,7 +1062,7 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev) sdev->host->host_no, sdev->channel, sdev->id, sdev->lun); device_initialize(&sdev->sdev_dev); - sdev->sdev_dev.parent = &sdev->sdev_gendev; + sdev->sdev_dev.parent = get_device(&sdev->sdev_gendev); sdev->sdev_dev.class = &sdev_class; dev_set_name(&sdev->sdev_dev, "%d:%d:%d:%d", sdev->host->host_no, sdev->channel, sdev->id, sdev->lun); -- GitLab From 9216d44dc13b5e858253f06d83ceea25a9b72f4f Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Sat, 10 Oct 2009 15:20:55 +0800 Subject: [PATCH 0033/1165] drm/i915: disable FBC for Pineview, fixing a boot hang. Pineview doesn't have this FBC mechanism, so this code doesn't apply. Signed-off-by: Shaohua Li Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_dma.c | 3 +-- drivers/gpu/drm/i915/i915_drv.h | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 92aeb918e0c..e5b138be45f 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1227,8 +1227,7 @@ static int i915_load_modeset_init(struct drm_device *dev, goto out; /* Try to set up FBC with a reasonable compressed buffer size */ - if (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev) || IS_GM45(dev)) && - i915_powersave) { + if (I915_HAS_FBC(dev) && i915_powersave) { int cfb_size; /* Try to get an 8M buffer... */ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 6035d3dae85..0094f185e17 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -981,7 +981,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev)) #define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev)) -#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_I965G(dev))) +#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_GM45(dev)) && !IS_IGD(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) -- GitLab From a3e17eb8f4080a79738a938abe718be255247a44 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Sat, 10 Oct 2009 10:42:37 +0800 Subject: [PATCH 0034/1165] drm/i915: Set the LVDS_BORDER when using LVDS scaling mode According to the spec the LVDS_BORDER_ENABLE bit decides whether the border data should be included in the active display and data sent to the panel. Border should be used when in VGA centered (un-scaled) mode or when scaling a 4:3 source image to a wide screen panel (typical 16:9). So when the LVDS scaling is used, decide whether the LVDS_BORDER should be enabled or not according to the current scaling mode. At the same time fix the typo error in LVDS center scaling mode. https://bugs.freedesktop.org/show_bug.cgi?id=23789 Signed-off-by: Zhao Yakui tested-by: Zhao Jian Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 2 ++ drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_display.c | 2 ++ drivers/gpu/drm/i915/intel_lvds.c | 10 +++++++++- 4 files changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 0094f185e17..17be01e351b 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -492,6 +492,8 @@ typedef struct drm_i915_private { struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT]; } mm; struct sdvo_device_mapping sdvo_mappings[2]; + /* indicate whether the LVDS_BORDER should be enabled or not */ + unsigned int lvds_border_bits; /* Reclocking support */ bool render_reclock_avail; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0466ddbeba3..5f9272459b7 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -968,6 +968,8 @@ #define LVDS_PORT_EN (1 << 31) /* Selects pipe B for LVDS data. Must be set on pre-965. */ #define LVDS_PIPEB_SELECT (1 << 30) +/* Enable border for unscaled (or aspect-scaled) display */ +#define LVDS_BORDER_ENABLE (1 << 15) /* * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per * pixel. diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3c14240cc00..9efe11761be 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2936,6 +2936,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, lvds = I915_READ(lvds_reg); lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT; + /* set the corresponsding LVDS_BORDER bit */ + lvds |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 98ae3d73577..089f18c66dd 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -380,7 +380,7 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, adjusted_mode->crtc_vblank_start + vsync_pos; /* keep the vsync width constant */ adjusted_mode->crtc_vsync_end = - adjusted_mode->crtc_vblank_start + vsync_width; + adjusted_mode->crtc_vsync_start + vsync_width; border = 1; break; case DRM_MODE_SCALE_ASPECT: @@ -525,6 +525,14 @@ static bool intel_lvds_mode_fixup(struct drm_encoder *encoder, out: lvds_priv->pfit_control = pfit_control; lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios; + /* + * When there exists the border, it means that the LVDS_BORDR + * should be enabled. + */ + if (border) + dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE; + else + dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE); /* * XXX: It would be nice to support lower refresh rates on the * panels to reduce power consumption, and perhaps match the -- GitLab From 06027f9111b9f3244ddc40752428f7847b0b867e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 5 Oct 2009 13:47:26 -0700 Subject: [PATCH 0035/1165] drm/i915: Save and restore the GM45 FBC regs on suspend and resume. This hasn't fixed the regressions we were testing against, but clearly should be required. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_suspend.c | 26 ++++++++++++++++++-------- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 17be01e351b..1254c4b80e3 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -342,6 +342,7 @@ typedef struct drm_i915_private { u32 savePFIT_CONTROL; u32 save_palette_a[256]; u32 save_palette_b[256]; + u32 saveDPFC_CB_BASE; u32 saveFBC_CFB_BASE; u32 saveFBC_LL_BASE; u32 saveFBC_CONTROL; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index bd6d8d91ca9..660c5f36424 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -437,10 +437,14 @@ void i915_save_display(struct drm_device *dev) /* FIXME: save TV & SDVO state */ /* FBC state */ - dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE); - dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE); - dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2); - dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); + if (IS_GM45(dev)) { + dev_priv->saveDPFC_CB_BASE = I915_READ(DPFC_CB_BASE); + } else { + dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE); + dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE); + dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2); + dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL); + } /* VGA state */ dev_priv->saveVGA0 = I915_READ(VGA0); @@ -511,10 +515,16 @@ void i915_restore_display(struct drm_device *dev) /* FIXME: restore TV & SDVO state */ /* FBC info */ - I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); - I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); - I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); - I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL); + if (IS_GM45(dev)) { + g4x_disable_fbc(dev); + I915_WRITE(DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE); + } else { + i8xx_disable_fbc(dev); + I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE); + I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE); + I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2); + I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL); + } /* VGA state */ I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); -- GitLab From 29e4e025be52c0619b9dfe6faba29bc3deac6272 Mon Sep 17 00:00:00 2001 From: Takao Indoh Date: Thu, 1 Oct 2009 17:55:16 -0400 Subject: [PATCH 0036/1165] [IA64] Restore registers in the stack on INIT Registers are not saved anywhere when INIT comes during fsys mode and we cannot know what happened when we investigate vmcore captured by kdump. This patch adds new function finish_pt_regs() so registers can be saved in such a case. Signed-off-by: Takao Indoh Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 104 ++++++++++++++++++++++------------------- 1 file changed, 57 insertions(+), 47 deletions(-) diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index d2877a7bfe2..496ac7a9948 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -887,6 +887,60 @@ ia64_mca_modify_comm(const struct task_struct *previous_current) memcpy(current->comm, comm, sizeof(current->comm)); } +static void +finish_pt_regs(struct pt_regs *regs, const pal_min_state_area_t *ms, + unsigned long *nat) +{ + const u64 *bank; + + /* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use + * pmsa_{xip,xpsr,xfs} + */ + if (ia64_psr(regs)->ic) { + regs->cr_iip = ms->pmsa_iip; + regs->cr_ipsr = ms->pmsa_ipsr; + regs->cr_ifs = ms->pmsa_ifs; + } else { + regs->cr_iip = ms->pmsa_xip; + regs->cr_ipsr = ms->pmsa_xpsr; + regs->cr_ifs = ms->pmsa_xfs; + } + regs->pr = ms->pmsa_pr; + regs->b0 = ms->pmsa_br0; + regs->ar_rsc = ms->pmsa_rsc; + copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, ®s->r1, nat); + copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, ®s->r2, nat); + copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, ®s->r3, nat); + copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, ®s->r8, nat); + copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, ®s->r9, nat); + copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, ®s->r10, nat); + copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, ®s->r11, nat); + copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, ®s->r12, nat); + copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, ®s->r13, nat); + copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, ®s->r14, nat); + copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, ®s->r15, nat); + if (ia64_psr(regs)->bn) + bank = ms->pmsa_bank1_gr; + else + bank = ms->pmsa_bank0_gr; + copy_reg(&bank[16-16], ms->pmsa_nat_bits, ®s->r16, nat); + copy_reg(&bank[17-16], ms->pmsa_nat_bits, ®s->r17, nat); + copy_reg(&bank[18-16], ms->pmsa_nat_bits, ®s->r18, nat); + copy_reg(&bank[19-16], ms->pmsa_nat_bits, ®s->r19, nat); + copy_reg(&bank[20-16], ms->pmsa_nat_bits, ®s->r20, nat); + copy_reg(&bank[21-16], ms->pmsa_nat_bits, ®s->r21, nat); + copy_reg(&bank[22-16], ms->pmsa_nat_bits, ®s->r22, nat); + copy_reg(&bank[23-16], ms->pmsa_nat_bits, ®s->r23, nat); + copy_reg(&bank[24-16], ms->pmsa_nat_bits, ®s->r24, nat); + copy_reg(&bank[25-16], ms->pmsa_nat_bits, ®s->r25, nat); + copy_reg(&bank[26-16], ms->pmsa_nat_bits, ®s->r26, nat); + copy_reg(&bank[27-16], ms->pmsa_nat_bits, ®s->r27, nat); + copy_reg(&bank[28-16], ms->pmsa_nat_bits, ®s->r28, nat); + copy_reg(&bank[29-16], ms->pmsa_nat_bits, ®s->r29, nat); + copy_reg(&bank[30-16], ms->pmsa_nat_bits, ®s->r30, nat); + copy_reg(&bank[31-16], ms->pmsa_nat_bits, ®s->r31, nat); +} + /* On entry to this routine, we are running on the per cpu stack, see * mca_asm.h. The original stack has not been touched by this event. Some of * the original stack's registers will be in the RBS on this stack. This stack @@ -921,7 +975,6 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, u64 r12 = ms->pmsa_gr[12-1], r13 = ms->pmsa_gr[13-1]; u64 ar_bspstore = regs->ar_bspstore; u64 ar_bsp = regs->ar_bspstore + (loadrs >> 16); - const u64 *bank; const char *msg; int cpu = smp_processor_id(); @@ -1024,54 +1077,9 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, p = (char *)r12 - sizeof(*regs); old_regs = (struct pt_regs *)p; memcpy(old_regs, regs, sizeof(*regs)); - /* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use - * pmsa_{xip,xpsr,xfs} - */ - if (ia64_psr(regs)->ic) { - old_regs->cr_iip = ms->pmsa_iip; - old_regs->cr_ipsr = ms->pmsa_ipsr; - old_regs->cr_ifs = ms->pmsa_ifs; - } else { - old_regs->cr_iip = ms->pmsa_xip; - old_regs->cr_ipsr = ms->pmsa_xpsr; - old_regs->cr_ifs = ms->pmsa_xfs; - } - old_regs->pr = ms->pmsa_pr; - old_regs->b0 = ms->pmsa_br0; old_regs->loadrs = loadrs; - old_regs->ar_rsc = ms->pmsa_rsc; old_unat = old_regs->ar_unat; - copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, &old_regs->r1, &old_unat); - copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, &old_regs->r2, &old_unat); - copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, &old_regs->r3, &old_unat); - copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, &old_regs->r8, &old_unat); - copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, &old_regs->r9, &old_unat); - copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, &old_regs->r10, &old_unat); - copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, &old_regs->r11, &old_unat); - copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, &old_regs->r12, &old_unat); - copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, &old_regs->r13, &old_unat); - copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, &old_regs->r14, &old_unat); - copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, &old_regs->r15, &old_unat); - if (ia64_psr(old_regs)->bn) - bank = ms->pmsa_bank1_gr; - else - bank = ms->pmsa_bank0_gr; - copy_reg(&bank[16-16], ms->pmsa_nat_bits, &old_regs->r16, &old_unat); - copy_reg(&bank[17-16], ms->pmsa_nat_bits, &old_regs->r17, &old_unat); - copy_reg(&bank[18-16], ms->pmsa_nat_bits, &old_regs->r18, &old_unat); - copy_reg(&bank[19-16], ms->pmsa_nat_bits, &old_regs->r19, &old_unat); - copy_reg(&bank[20-16], ms->pmsa_nat_bits, &old_regs->r20, &old_unat); - copy_reg(&bank[21-16], ms->pmsa_nat_bits, &old_regs->r21, &old_unat); - copy_reg(&bank[22-16], ms->pmsa_nat_bits, &old_regs->r22, &old_unat); - copy_reg(&bank[23-16], ms->pmsa_nat_bits, &old_regs->r23, &old_unat); - copy_reg(&bank[24-16], ms->pmsa_nat_bits, &old_regs->r24, &old_unat); - copy_reg(&bank[25-16], ms->pmsa_nat_bits, &old_regs->r25, &old_unat); - copy_reg(&bank[26-16], ms->pmsa_nat_bits, &old_regs->r26, &old_unat); - copy_reg(&bank[27-16], ms->pmsa_nat_bits, &old_regs->r27, &old_unat); - copy_reg(&bank[28-16], ms->pmsa_nat_bits, &old_regs->r28, &old_unat); - copy_reg(&bank[29-16], ms->pmsa_nat_bits, &old_regs->r29, &old_unat); - copy_reg(&bank[30-16], ms->pmsa_nat_bits, &old_regs->r30, &old_unat); - copy_reg(&bank[31-16], ms->pmsa_nat_bits, &old_regs->r31, &old_unat); + finish_pt_regs(old_regs, ms, &old_unat); /* Next stack a struct switch_stack. mca_asm.S built a partial * switch_stack, copy it and fill in the blanks using pt_regs and @@ -1141,6 +1149,8 @@ ia64_mca_modify_original_stack(struct pt_regs *regs, no_mod: mprintk(KERN_INFO "cpu %d, %s %s, original stack not modified\n", smp_processor_id(), type, msg); + old_unat = regs->ar_unat; + finish_pt_regs(regs, ms, &old_unat); return previous_current; } -- GitLab From dec1798f81f7e8a299734bdc29197ae77bf08018 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 10 Oct 2009 22:21:59 +0200 Subject: [PATCH 0037/1165] [IA64] unsigned cannot be less than 0 in sn_hwperf_ioctl() struct sn_hwperf_ioctl_args member arg (u64) cannot be less than 0. Signed-off-by: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/sn/kernel/sn2/sn_hwperf.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c index 4c7e7479095..55ac3c4e11d 100644 --- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c +++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c @@ -786,17 +786,18 @@ sn_hwperf_ioctl(struct inode *in, struct file *fp, u32 op, unsigned long arg) break; case SN_HWPERF_GET_OBJ_NODE: - if (a.sz != sizeof(u64) || a.arg < 0) { + i = a.arg; + if (a.sz != sizeof(u64) || i < 0) { r = -EINVAL; goto error; } if ((r = sn_hwperf_enum_objects(&nobj, &objs)) == 0) { - if (a.arg >= nobj) { + if (i >= nobj) { r = -EINVAL; vfree(objs); goto error; } - if (objs[(i = a.arg)].id != a.arg) { + if (objs[i].id != a.arg) { for (i = 0; i < nobj; i++) { if (objs[i].id == a.arg) break; -- GitLab From 181a5336d6cc836f05507410d66988c483ad0154 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Tue, 13 Oct 2009 10:40:52 -0700 Subject: [PATCH 0038/1165] drm/i915: Fix render reclock availability detection. If the device didn't support EDP, we would bail out too soon. Signed-off-by: Andy Lutomirski [anholt: Pulled this patch out of the patch for adding quirks to enable reclocking.] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_bios.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 4337414846b..96cd256e60e 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -351,20 +351,18 @@ parse_driver_features(struct drm_i915_private *dev_priv, struct drm_device *dev = dev_priv->dev; struct bdb_driver_features *driver; - /* set default for chips without eDP */ - if (!SUPPORTS_EDP(dev)) { - dev_priv->edp_support = 0; - return; - } - driver = find_section(bdb, BDB_DRIVER_FEATURES); if (!driver) return; - if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP) + if (driver && SUPPORTS_EDP(dev) && + driver->lvds_config == BDB_DRIVER_FEATURE_EDP) { dev_priv->edp_support = 1; + } else { + dev_priv->edp_support = 0; + } - if (driver->dual_frequency) + if (driver && driver->dual_frequency) dev_priv->render_reclock_avail = true; } -- GitLab From adcd740341dbd58eb94a8c2885c171ce9eb8677c Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 12 Oct 2009 08:24:30 -0600 Subject: [PATCH 0039/1165] [IA64] Require SAL 3.2 in order to do extended config space ops We had assumed that SAL firmware would return an error if it didn't understand extended config space. Unfortunately, the SAL on the SGI 750 doesn't do that, it panics the machine. So, condition the extended PCI config space accesses on SAL revision 3.2. Signed-off-by: Matthew Wilcox Tested-by: Brad Spengler Signed-off-by: Tony Luck --- arch/ia64/pci/pci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 7de76dd352f..c0fca2c1c85 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -56,10 +56,13 @@ int raw_pci_read(unsigned int seg, unsigned int bus, unsigned int devfn, if ((seg | reg) <= 255) { addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg); mode = 0; - } else { + } else if (sal_revision >= SAL_VERSION_CODE(3,2)) { addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg); mode = 1; + } else { + return -EINVAL; } + result = ia64_sal_pci_config_read(addr, mode, len, &data); if (result != 0) return -EINVAL; @@ -80,9 +83,11 @@ int raw_pci_write(unsigned int seg, unsigned int bus, unsigned int devfn, if ((seg | reg) <= 255) { addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg); mode = 0; - } else { + } else if (sal_revision >= SAL_VERSION_CODE(3,2)) { addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg); mode = 1; + } else { + return -EINVAL; } result = ia64_sal_pci_config_write(addr, mode, len, value); if (result != 0) -- GitLab From c03342fa6d4617a77cb867ee0ec71665d520eb69 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 29 Sep 2009 11:01:23 +0800 Subject: [PATCH 0040/1165] drm/i915: disable powersave feature for Ironlake currently Until we figure out the right setting for powersave features on Ironlake, disable it for now. Also disable watermark update, which has new registers for it on Ironlake too. Signed-off-by: Zhenyu Wang Reviewed-by: Jesse Barnes [anholt: Resolved against the Pineview FBC changes] Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 5 ++++- drivers/gpu/drm/i915/intel_display.c | 11 +++++++++-- 2 files changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 1254c4b80e3..24e154e4722 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -984,7 +984,10 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev)) #define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev)) -#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && (IS_I9XX(dev) || IS_GM45(dev)) && !IS_IGD(dev)) +#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \ + (IS_I9XX(dev) || IS_GM45(dev)) && \ + !IS_IGD(dev) && \ + !IS_IGDNG(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 9efe11761be..be7fada590d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2586,6 +2586,9 @@ static void intel_update_watermarks(struct drm_device *dev) unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0; int enabled = 0, pixel_size = 0; + if (!dev_priv->display.update_wm) + return; + /* Get the clock config from both planes */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { intel_crtc = to_intel_crtc(crtc); @@ -4126,7 +4129,9 @@ void intel_init_clock_gating(struct drm_device *dev) * Disable clock gating reported to work incorrectly according to the * specs, but enable as much else as we can. */ - if (IS_G4X(dev)) { + if (IS_IGDNG(dev)) { + return; + } else if (IS_G4X(dev)) { uint32_t dspclk_gate; I915_WRITE(RENCLK_GATE_D1, 0); I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | @@ -4214,7 +4219,9 @@ static void intel_init_display(struct drm_device *dev) i830_get_display_clock_speed; /* For FIFO watermark updates */ - if (IS_G4X(dev)) + if (IS_IGDNG(dev)) + dev_priv->display.update_wm = NULL; + else if (IS_G4X(dev)) dev_priv->display.update_wm = g4x_update_wm; else if (IS_I965G(dev)) dev_priv->display.update_wm = i965_update_wm; -- GitLab From 58a27471d00dc09945cbcfbbc5cbcdcd3c28211d Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 25 Sep 2009 08:01:28 +0000 Subject: [PATCH 0041/1165] drm/i915: Fix FDI M/N setting according with correct color depth FDI M/N calculation hasn't taken the current pipe color depth into account, but always set as 24bpp. This one checks current pipe color depth setting, and change FDI M/N calculation a little to use bits_per_pixel first, then convert to bytes_per_pixel later. This fixes display corrupt issue on Arrandle LVDS with 1600x900 panel in 18bpp dual-channel mode. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 5 +++++ drivers/gpu/drm/i915/intel_display.c | 31 ++++++++++++++++++++++++---- 2 files changed, 32 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 5f9272459b7..0dd87a7309e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1782,6 +1782,11 @@ #define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ #define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1) #define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0) +#define PIPE_BPC_MASK (7 << 5) /* Ironlake */ +#define PIPE_8BPC (0 << 5) +#define PIPE_10BPC (1 << 5) +#define PIPE_6BPC (2 << 5) +#define PIPE_12BPC (3 << 5) #define DSPARB 0x70030 #define DSPARB_CSTART_MASK (0x7f << 7) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index be7fada590d..8278d9d163a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2082,7 +2082,7 @@ fdi_reduce_ratio(u32 *num, u32 *den) #define LINK_N 0x80000 static void -igdng_compute_m_n(int bytes_per_pixel, int nlanes, +igdng_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { @@ -2092,7 +2092,8 @@ igdng_compute_m_n(int bytes_per_pixel, int nlanes, temp = (u64) DATA_N * pixel_clock; temp = div_u64(temp, link_clock); - m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes); + m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes); + m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */ m_n->gmch_n = DATA_N; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); @@ -2766,7 +2767,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* FDI link */ if (IS_IGDNG(dev)) { - int lane, link_bw; + int lane, link_bw, bpp; /* eDP doesn't require FDI link, so just set DP M/N according to current link config */ if (is_edp) { @@ -2785,7 +2786,29 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, lane = 4; link_bw = 270000; } - igdng_compute_m_n(3, lane, target_clock, + + /* determine panel color depth */ + temp = I915_READ(pipeconf_reg); + + switch (temp & PIPE_BPC_MASK) { + case PIPE_8BPC: + bpp = 24; + break; + case PIPE_10BPC: + bpp = 30; + break; + case PIPE_6BPC: + bpp = 18; + break; + case PIPE_12BPC: + bpp = 36; + break; + default: + DRM_ERROR("unknown pipe bpc value\n"); + bpp = 24; + } + + igdng_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); } -- GitLab From 05277c75f6dea8ecf59138cd1b6781fb54ae08bd Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 12 Oct 2009 23:42:10 +0000 Subject: [PATCH 0042/1165] xfs: fix double IRELE in xfs_dqrele_inode xfs_dqrele_inode calls xfs_iput to release the ilock and a reference and then also calls IRELE which does a second decrement of the reference count. This leads to a premature freeing of inodes when quotas were turned off while the filesystem was mounted. Thanks to Utako Kusaka for reporting the bug and provinding a good testcase. Signed-off-by: Christoph Hellwig Reported-by: Utako Kusaka Reviewed-by: Alex Elder Signed-off-by: Alex Elder --- fs/xfs/quota/xfs_qm_syscalls.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/xfs/quota/xfs_qm_syscalls.c b/fs/xfs/quota/xfs_qm_syscalls.c index 4e4276b956e..5d1a3b98a6e 100644 --- a/fs/xfs/quota/xfs_qm_syscalls.c +++ b/fs/xfs/quota/xfs_qm_syscalls.c @@ -876,7 +876,6 @@ xfs_dqrele_inode( ip->i_gdquot = NULL; } xfs_iput(ip, XFS_ILOCK_EXCL); - IRELE(ip); return 0; } -- GitLab From d58e6576b0deec6f0b9ff8450fe282da18c50883 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 13 Oct 2009 20:40:43 +0200 Subject: [PATCH 0043/1165] futex: Handle spurious wake up The futex code does not handle spurious wake up in futex_wait and futex_wait_requeue_pi. The code assumes that any wake up which was not caused by futex_wake / requeue or by a timeout was caused by a signal wake up and returns one of the syscall restart error codes. In case of a spurious wake up the signal delivery code which deals with the restart error codes is not invoked and we return that error code to user space. That causes applications which actually check the return codes to fail. Blaise reported that on preempt-rt a python test program run into a exception trap. -rt exposed that due to a built in spurious wake up accelerator :) Solve this by checking signal_pending(current) in the wake up path and handle the spurious wake up case w/o returning to user space. Reported-by: Blaise Gassend Debugged-by: Darren Hart Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: stable@kernel.org LKML-Reference: --- kernel/futex.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/kernel/futex.c b/kernel/futex.c index 4949d336d88..5c88839bd99 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -1791,6 +1791,7 @@ static int futex_wait(u32 __user *uaddr, int fshared, current->timer_slack_ns); } +retry: /* Prepare to wait on uaddr. */ ret = futex_wait_setup(uaddr, val, fshared, &q, &hb); if (ret) @@ -1808,9 +1809,14 @@ static int futex_wait(u32 __user *uaddr, int fshared, goto out_put_key; /* - * We expect signal_pending(current), but another thread may - * have handled it for us already. + * We expect signal_pending(current), but we might be the + * victim of a spurious wakeup as well. */ + if (!signal_pending(current)) { + put_futex_key(fshared, &q.key); + goto retry; + } + ret = -ERESTARTSYS; if (!abs_time) goto out_put_key; @@ -2118,9 +2124,11 @@ int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb, */ plist_del(&q->list, &q->list.plist); + /* Handle spurious wakeups gracefully */ + ret = -EAGAIN; if (timeout && !timeout->task) ret = -ETIMEDOUT; - else + else if (signal_pending(current)) ret = -ERESTARTNOINTR; } return ret; @@ -2198,6 +2206,7 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared, debug_rt_mutex_init_waiter(&rt_waiter); rt_waiter.task = NULL; +retry: key2 = FUTEX_KEY_INIT; ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE); if (unlikely(ret != 0)) @@ -2292,6 +2301,9 @@ out_put_keys: out_key2: put_futex_key(fshared, &key2); + /* Spurious wakeup ? */ + if (ret == -EAGAIN) + goto retry; out: if (to) { hrtimer_cancel(&to->timer); -- GitLab From 54f8dd3c99052456a65bd26aa3313f57cd145a73 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 18 Sep 2009 12:48:12 -0700 Subject: [PATCH 0044/1165] [IA64] use printk_once() unaligned.c/io_common.c Use printk_once() in a couple of places. Signed-off-by: Marcin Slusarz Signed-off-by: Andrew Morton Signed-off-by: Tony Luck --- arch/ia64/kernel/unaligned.c | 6 ++---- arch/ia64/sn/kernel/io_common.c | 8 ++------ 2 files changed, 4 insertions(+), 10 deletions(-) diff --git a/arch/ia64/kernel/unaligned.c b/arch/ia64/kernel/unaligned.c index 6db08599ebb..776dd40397e 100644 --- a/arch/ia64/kernel/unaligned.c +++ b/arch/ia64/kernel/unaligned.c @@ -60,7 +60,6 @@ dump (const char *str, void *vp, size_t len) */ int no_unaligned_warning; int unaligned_dump_stack; -static int noprint_warning; /* * For M-unit: @@ -1357,9 +1356,8 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs) /* watch for command names containing %s */ printk(KERN_WARNING "%s", buf); } else { - if (no_unaligned_warning && !noprint_warning) { - noprint_warning = 1; - printk(KERN_WARNING "%s(%d) encountered an " + if (no_unaligned_warning) { + printk_once(KERN_WARNING "%s(%d) encountered an " "unaligned exception which required\n" "kernel assistance, which degrades " "the performance of the application.\n" diff --git a/arch/ia64/sn/kernel/io_common.c b/arch/ia64/sn/kernel/io_common.c index 25831c47c57..308e6595110 100644 --- a/arch/ia64/sn/kernel/io_common.c +++ b/arch/ia64/sn/kernel/io_common.c @@ -119,7 +119,6 @@ sn_pcidev_info_get(struct pci_dev *dev) * Additionally note that the struct sn_flush_device_war also has to be * removed from arch/ia64/sn/include/xtalk/hubdev.h */ -static u8 war_implemented = 0; static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device, struct sn_flush_device_common *common) @@ -128,11 +127,8 @@ static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device, struct sn_flush_device_war *dev_entry; struct ia64_sal_retval isrv = {0,0,0,0}; - if (!war_implemented) { - printk(KERN_WARNING "PROM version < 4.50 -- implementing old " - "PROM flush WAR\n"); - war_implemented = 1; - } + printk_once(KERN_WARNING + "PROM version < 4.50 -- implementing old PROM flush WAR\n"); war_list = kzalloc(DEV_PER_WIDGET * sizeof(*war_list), GFP_KERNEL); BUG_ON(!war_list); -- GitLab From 1502f08edc040b6ba4b986454416564088995e79 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 12 Oct 2009 09:51:41 -0700 Subject: [PATCH 0045/1165] [IA64] SMT friendly version of spin_unlock_wait() We can be kinder to SMT systems in spin_unlock_wait. Signed-off-by: Tony Luck --- arch/ia64/include/asm/spinlock.h | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h index 4fa502739d6..239ecdc9516 100644 --- a/arch/ia64/include/asm/spinlock.h +++ b/arch/ia64/include/asm/spinlock.h @@ -75,6 +75,20 @@ static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock) ACCESS_ONCE(*p) = (tmp + 2) & ~1; } +static __always_inline void __ticket_spin_unlock_wait(raw_spinlock_t *lock) +{ + int *p = (int *)&lock->lock, ticket; + + ia64_invala(); + + for (;;) { + asm volatile ("ld4.c.nc %0=[%1]" : "=r"(ticket) : "r"(p) : "memory"); + if (!(((ticket >> TICKET_SHIFT) ^ ticket) & TICKET_MASK)) + return; + cpu_relax(); + } +} + static inline int __ticket_spin_is_locked(raw_spinlock_t *lock) { long tmp = ACCESS_ONCE(lock->lock); @@ -123,8 +137,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock, static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) { - while (__raw_spin_is_locked(lock)) - cpu_relax(); + __ticket_spin_unlock_wait(lock); } #define __raw_read_can_lock(rw) (*(volatile int *)(rw) >= 0) -- GitLab From 03541f8b69c058162e4cf9675ec9181e6a204d55 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 14 Oct 2009 16:58:03 +1100 Subject: [PATCH 0046/1165] perf_event: Adjust frequency and unthrottle for non-group-leader events The loop in perf_ctx_adjust_freq checks the frequency of sampling event counters, and adjusts the event interval and unthrottles the event if required, and resets the interrupt count for the event. However, at present it only looks at group leaders. This means that a sampling event that is not a group leader will eventually get throttled, once its interrupt count reaches sysctl_perf_event_sample_rate/HZ --- and that is guaranteed to happen, if the event is active for long enough, since the interrupt count never gets reset. Once it is throttled it never gets unthrottled, so it basically just stops working at that point. This fixes it by making perf_ctx_adjust_freq use ctx->event_list rather than ctx->group_list. The existing spin_lock/spin_unlock around the loop makes it unnecessary to put rcu_read_lock/ rcu_read_unlock around the list_for_each_entry_rcu(). Reported-by: Mark W. Krentel Signed-off-by: Paul Mackerras Cc: Corey Ashford Cc: Peter Zijlstra LKML-Reference: <19157.26731.855609.165622@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar --- kernel/perf_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 9d0b5c66588..afb7ef3dbc4 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -1355,7 +1355,7 @@ static void perf_ctx_adjust_freq(struct perf_event_context *ctx) u64 interrupts, freq; spin_lock(&ctx->lock); - list_for_each_entry(event, &ctx->group_list, group_entry) { + list_for_each_entry_rcu(event, &ctx->event_list, event_entry) { if (event->state != PERF_EVENT_STATE_ACTIVE) continue; -- GitLab From a771fe6e4e3e58f2056823ef9c30a554ec48f453 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 12 Oct 2009 17:31:20 +0100 Subject: [PATCH 0047/1165] ARM: 5757/1: Thumb-2: Correct "mov.w pc, lr" instruction which is unpredictable The 32-bit wide variant of "mov pc, reg" in Thumb-2 is unpredictable causing improper handling of the undefined instructions not caught by the kernel. This patch adds a movw_pc macro for such situations (currently only used in call_fpe). Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/kernel/entry-armv.S | 28 ++++++++++++++-------------- arch/arm/kernel/entry-header.S | 15 +++++++++++++++ 2 files changed, 29 insertions(+), 14 deletions(-) diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 322410be573..0022b4d57f8 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -608,33 +608,33 @@ call_fpe: THUMB( add pc, r8 ) nop - W(mov) pc, lr @ CP#0 + movw_pc lr @ CP#0 W(b) do_fpe @ CP#1 (FPE) W(b) do_fpe @ CP#2 (FPE) - W(mov) pc, lr @ CP#3 + movw_pc lr @ CP#3 #ifdef CONFIG_CRUNCH b crunch_task_enable @ CP#4 (MaverickCrunch) b crunch_task_enable @ CP#5 (MaverickCrunch) b crunch_task_enable @ CP#6 (MaverickCrunch) #else - W(mov) pc, lr @ CP#4 - W(mov) pc, lr @ CP#5 - W(mov) pc, lr @ CP#6 + movw_pc lr @ CP#4 + movw_pc lr @ CP#5 + movw_pc lr @ CP#6 #endif - W(mov) pc, lr @ CP#7 - W(mov) pc, lr @ CP#8 - W(mov) pc, lr @ CP#9 + movw_pc lr @ CP#7 + movw_pc lr @ CP#8 + movw_pc lr @ CP#9 #ifdef CONFIG_VFP W(b) do_vfp @ CP#10 (VFP) W(b) do_vfp @ CP#11 (VFP) #else - W(mov) pc, lr @ CP#10 (VFP) - W(mov) pc, lr @ CP#11 (VFP) + movw_pc lr @ CP#10 (VFP) + movw_pc lr @ CP#11 (VFP) #endif - W(mov) pc, lr @ CP#12 - W(mov) pc, lr @ CP#13 - W(mov) pc, lr @ CP#14 (Debug) - W(mov) pc, lr @ CP#15 (Control) + movw_pc lr @ CP#12 + movw_pc lr @ CP#13 + movw_pc lr @ CP#14 (Debug) + movw_pc lr @ CP#15 (Control) #ifdef CONFIG_NEON .align 6 diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index ac34c0d9384..7e9ed1eea40 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -110,6 +110,13 @@ mov \rd, sp, lsr #13 mov \rd, \rd, lsl #13 .endm + + @ + @ 32-bit wide "mov pc, reg" + @ + .macro movw_pc, reg + mov pc, \reg + .endm #else /* CONFIG_THUMB2_KERNEL */ .macro svc_exit, rpsr clrex @ clear the exclusive monitor @@ -146,6 +153,14 @@ lsr \rd, \rd, #13 mov \rd, \rd, lsl #13 .endm + + @ + @ 32-bit wide "mov pc, reg" + @ + .macro movw_pc, reg + mov pc, \reg + nop + .endm #endif /* !CONFIG_THUMB2_KERNEL */ /* -- GitLab From cde3f8607350666c4dd120dbbdbd9c70ffb2ea61 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 13 Oct 2009 08:54:30 +0100 Subject: [PATCH 0048/1165] ARM: 5759/1: Add register information of threads to coredump Defines ELF_CORE_COPY_TASK_REGS so that CPU register information of every thread is included in coredump. Without this, only the faulting thread is coredumped. Cc: Roger Quadros Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Mika Westerberg Signed-off-by: Artem Bityutskiy Signed-off-by: Russell King --- arch/arm/include/asm/elf.h | 3 +++ arch/arm/kernel/process.c | 9 +++++++++ 2 files changed, 12 insertions(+) diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index c3b911ee915..6aac3f5bb2f 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *); extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int); #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk) +int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); +#define ELF_CORE_COPY_TASK_REGS dump_task_regs + #define USE_ELF_CORE_DUMP #define ELF_EXEC_PAGESIZE 4096 diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 790fbee92ec..0d96d0171c0 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -327,6 +327,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, return 0; } +/* + * Fill in the task's elfregs structure for a core dump. + */ +int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs) +{ + elf_core_copy_regs(elfregs, task_pt_regs(t)); + return 1; +} + /* * fill in the fpe structure for a core dump... */ -- GitLab From 3d977c012f1af4a867939fa21ad502d5279fa0a0 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Wed, 14 Oct 2009 01:56:10 +0100 Subject: [PATCH 0049/1165] ARM: 5760/1: ep93xx: fix build error in edb93xx.c Fix a build error due to a typo (missing comma) in: ARM: 5754/1: ep93xx: update i2c support Signed-off-by: H Hartley Sweeten Acked-by: Ryan Mallon Signed-off-by: Russell King --- arch/arm/mach-ep93xx/edb93xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index ca71cf1a72a..a4a7be30800 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -112,7 +112,7 @@ static void __init edb93xx_register_i2c(void) ARRAY_SIZE(edb93xxa_i2c_board_info)); } else if (machine_is_edb9307() || machine_is_edb9312() || machine_is_edb9315()) { - ep93xx_register_i2c(&edb93xx_i2c_gpio_data + ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); } -- GitLab From 799e2205ec65e174f752b558c62a92c4752df313 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 9 Oct 2009 12:16:40 +0200 Subject: [PATCH 0050/1165] sched: Disable SD_PREFER_LOCAL for MC/CPU domains Yanmin reported that both tbench and hackbench were significantly hurt by trying to keep tasks local on these domains, esp on small cache machines. So disable it in order to promote spreading outside of the cache domains. Reported-by: "Zhang, Yanmin" Signed-off-by: Peter Zijlstra CC: Mike Galbraith LKML-Reference: <1255083400.8802.15.camel@laptop> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/topology.h | 1 + include/linux/topology.h | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 25a92842dd9..d823c245f63 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -143,6 +143,7 @@ extern unsigned long node_remap_size[]; | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ + | 1*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ | 0*SD_SHARE_PKG_RESOURCES \ diff --git a/include/linux/topology.h b/include/linux/topology.h index fc0bf3edeb6..57e63579bfd 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -129,7 +129,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_PREFER_LOCAL \ + | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 1*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ @@ -162,7 +162,7 @@ int arch_update_cpu_topology(void); | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_PREFER_LOCAL \ + | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_SHARE_PKG_RESOURCES \ | 0*SD_SERIALIZE \ -- GitLab From 92f6a5e37a2e2d3342dafb2b39c2f8bc340bbf84 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 9 Oct 2009 12:43:07 +0200 Subject: [PATCH 0051/1165] sched: Do less agressive buddy clearing Yanmin reported a hackbench regression due to: > commit de69a80be32445b0a71e8e3b757e584d7beb90f7 > Author: Peter Zijlstra > Date: Thu Sep 17 09:01:20 2009 +0200 > > sched: Stop buddies from hogging the system I really liked de69a80b, and it affecting hackbench shows I wasn't crazy ;-) So hackbench is a multi-cast, with one sender spraying multiple receivers, who in their turn don't spray back. This would be exactly the scenario that patch 'cures'. Previously we would not clear the last buddy after running the next task, allowing the sender to get back to work sooner than it otherwise ought to have been, increasing latencies for other tasks. Now, since those receivers don't poke back, they don't enforce the buddy relation, which means there's nothing to re-elect the sender. Cure this by less agressively clearing the buddy stats. Only clear buddies when they were not chosen. It should still avoid a buddy sticking around long after its served its time. Reported-by: "Zhang, Yanmin" Signed-off-by: Peter Zijlstra CC: Mike Galbraith LKML-Reference: <1255084986.8802.46.camel@laptop> Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 4e777b47eed..c32c3e643da 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -861,12 +861,21 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se); static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq) { struct sched_entity *se = __pick_next_entity(cfs_rq); + struct sched_entity *buddy; - if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, se) < 1) - return cfs_rq->next; + if (cfs_rq->next) { + buddy = cfs_rq->next; + cfs_rq->next = NULL; + if (wakeup_preempt_entity(buddy, se) < 1) + return buddy; + } - if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, se) < 1) - return cfs_rq->last; + if (cfs_rq->last) { + buddy = cfs_rq->last; + cfs_rq->last = NULL; + if (wakeup_preempt_entity(buddy, se) < 1) + return buddy; + } return se; } @@ -1654,16 +1663,6 @@ static struct task_struct *pick_next_task_fair(struct rq *rq) do { se = pick_next_entity(cfs_rq); - /* - * If se was a buddy, clear it so that it will have to earn - * the favour again. - * - * If se was not a buddy, clear the buddies because neither - * was elegible to run, let them earn it again. - * - * IOW. unconditionally clear buddies. - */ - __clear_buddies(cfs_rq, NULL); set_next_entity(cfs_rq, se); cfs_rq = group_cfs_rq(se); } while (cfs_rq); -- GitLab From 4b7348a15972274eb16182d10987f69da3e95719 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 14 Oct 2009 18:25:23 +0200 Subject: [PATCH 0052/1165] ALSA: hda - Fix capture source checks for ALC662/663 codecs The ALC662/663 parser calls wrongly alc880_auto_create_input_ctls() to check the capture source selections. This should be alc882, instead. Reference: Novell bnc#546918 http://bugzilla.novell.com/show_bug.cgi?id=546918 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c08ca660dab..9b1cff83497 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -17374,7 +17374,7 @@ static int alc662_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin, /* create playback/capture controls for input pins */ #define alc662_auto_create_input_ctls \ - alc880_auto_create_input_ctls + alc882_auto_create_input_ctls static void alc662_auto_set_output_and_unmute(struct hda_codec *codec, hda_nid_t nid, int pin_type, -- GitLab From 06c3aa5ef1c9491f4c94483ca52afc420bc58c5a Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 14 Oct 2009 10:52:40 -0700 Subject: [PATCH 0053/1165] mlx4_core: Add a new supported 40 GigE device ID Add MT26438 (ConnectX EN 40GigE PCIe 2.0 5GT/s) to the list of supported devices. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier --- drivers/net/mlx4/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 5dd7225b178..291a505fd4f 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -1282,6 +1282,7 @@ static struct pci_device_id mlx4_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */ { PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */ { PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/ + { PCI_VDEVICE(MELLANOX, 0x6746) }, /* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */ { PCI_VDEVICE(MELLANOX, 0x676e) }, /* MT26478 ConnectX2 40GigE PCIe gen2 */ { 0, } }; -- GitLab From 2bc872036e1c5948b5b02942810bbdd8dbdb9812 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Wed, 14 Oct 2009 10:12:39 -0700 Subject: [PATCH 0054/1165] futex: Check for NULL keys in match_futex If userspace tries to perform a requeue_pi on a non-requeue_pi waiter, it will find the futex_q->requeue_pi_key to be NULL and OOPS. Check for NULL in match_futex() instead of doing explicit NULL pointer checks on all call sites. While match_futex(NULL, NULL) returning false is a little odd, it's still correct as we expect valid key references. Signed-off-by: Darren Hart Cc: Peter Zijlstra Cc: Ingo Molnar CC: Eric Dumazet CC: Dinakar Guniguntala CC: John Stultz Cc: stable@kernel.org LKML-Reference: <4AD60687.10306@us.ibm.com> Signed-off-by: Thomas Gleixner --- kernel/futex.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/futex.c b/kernel/futex.c index 5c88839bd99..06938e560ac 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -150,7 +150,8 @@ static struct futex_hash_bucket *hash_futex(union futex_key *key) */ static inline int match_futex(union futex_key *key1, union futex_key *key2) { - return (key1->both.word == key2->both.word + return (key1 && key2 + && key1->both.word == key2->both.word && key1->both.ptr == key2->both.ptr && key1->both.offset == key2->both.offset); } -- GitLab From 8c2a6d730400e14bf28ccfa11b9bbf453db775ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 14 Oct 2009 02:00:42 -0400 Subject: [PATCH 0055/1165] drm/radeon/kms: move active_device setup into encoder fixup() radeon_encoder->active_device defines the active routing between the encoder and connector. The encoder fixup and dpms functions need to know the active_device to function properly. Setting active_device in the prepare hook was too late in some cases. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 19 ++++++------------- .../gpu/drm/radeon/radeon_legacy_encoders.c | 17 ++++++++--------- 2 files changed, 14 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 10845f39124..6cdef27be99 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -194,6 +194,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); if (radeon_encoder->rmx_type != RMX_OFF) @@ -860,16 +862,9 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args; int index = 0; bool is_dig = false; - int devices; memset(&args, 0, sizeof(args)); - /* on DPMS off we have no idea if active device is meaningful */ - if (mode != DRM_MODE_DPMS_ON && !radeon_encoder->active_device) - devices = radeon_encoder->devices; - else - devices = radeon_encoder->active_device; - DRM_DEBUG("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n", radeon_encoder->encoder_id, mode, radeon_encoder->devices, radeon_encoder->active_device); @@ -900,18 +895,18 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) break; case ENCODER_OBJECT_ID_INTERNAL_DAC1: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1: - if (devices & (ATOM_DEVICE_TV_SUPPORT)) + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl); - else if (devices & (ATOM_DEVICE_CV_SUPPORT)) + else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl); else index = GetIndexIntoMasterTable(COMMAND, DAC1OutputControl); break; case ENCODER_OBJECT_ID_INTERNAL_DAC2: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2: - if (devices & (ATOM_DEVICE_TV_SUPPORT)) + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl); - else if (devices & (ATOM_DEVICE_CV_SUPPORT)) + else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl); else index = GetIndexIntoMasterTable(COMMAND, DAC2OutputControl); @@ -1254,8 +1249,6 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) { radeon_atom_output_lock(encoder, true); radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); - - radeon_encoder_set_active_device(encoder); } static void radeon_atom_encoder_commit(struct drm_encoder *encoder) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 6ceb958fd19..3a75b5b6009 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -107,8 +107,6 @@ static void radeon_legacy_lvds_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_lvds_dpms(encoder, DRM_MODE_DPMS_OFF); - - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_lvds_commit(struct drm_encoder *encoder) @@ -192,6 +190,8 @@ static bool radeon_legacy_lvds_mode_fixup(struct drm_encoder *encoder, { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); if (radeon_encoder->rmx_type != RMX_OFF) @@ -218,7 +218,8 @@ static bool radeon_legacy_primary_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -272,7 +273,6 @@ static void radeon_legacy_primary_dac_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_primary_dac_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_primary_dac_commit(struct drm_encoder *encoder) @@ -468,7 +468,6 @@ static void radeon_legacy_tmds_int_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tmds_int_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tmds_int_commit(struct drm_encoder *encoder) @@ -593,7 +592,8 @@ static bool radeon_legacy_tmds_ext_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -636,7 +636,6 @@ static void radeon_legacy_tmds_ext_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tmds_ext_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tmds_ext_commit(struct drm_encoder *encoder) @@ -735,7 +734,8 @@ static bool radeon_legacy_tv_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -839,7 +839,6 @@ static void radeon_legacy_tv_dac_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tv_dac_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tv_dac_commit(struct drm_encoder *encoder) -- GitLab From 1b4d7d75ccff38008ccd40f8e2d74e33a087caaa Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 01:33:35 -0400 Subject: [PATCH 0056/1165] drm/radeon/kms: fix internal tmds setup on legacy display engine - crtc 0 routing was wrong - need to clear various timing bits in FP_GEN_CNTL - need to set FP_H/V2_SYNC_STRT_WID regs for crtc 1 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 3 +++ drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 10 +++++++++- 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index d22a195cf15..8d0b7aa87fa 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -668,6 +668,9 @@ static bool radeon_set_crtc_timing(struct drm_crtc *crtc, struct drm_display_mod WREG32(RADEON_DISP2_MERGE_CNTL, disp2_merge_cntl); WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + + WREG32(RADEON_FP_H2_SYNC_STRT_WID, crtc_h_sync_strt_wid); + WREG32(RADEON_FP_V2_SYNC_STRT_WID, crtc_v_sync_strt_wid); } else { uint32_t crtc_gen_cntl; uint32_t crtc_ext_cntl; diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 3a75b5b6009..00382122869 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -542,6 +542,14 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder, fp_gen_cntl &= ~(RADEON_FP_FPON | RADEON_FP_TMDS_EN); + fp_gen_cntl &= ~(RADEON_FP_RMX_HVSYNC_CONTROL_EN | + RADEON_FP_DFP_SYNC_SEL | + RADEON_FP_CRT_SYNC_SEL | + RADEON_FP_CRTC_LOCK_8DOT | + RADEON_FP_USE_SHADOW_EN | + RADEON_FP_CRTC_USE_SHADOW_VEND | + RADEON_FP_CRT_SYNC_ALT); + if (1) /* FIXME rgbBits == 8 */ fp_gen_cntl |= RADEON_FP_PANEL_FORMAT; /* 24 bit format */ else @@ -555,7 +563,7 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder, else fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1; } else - fp_gen_cntl |= RADEON_FP_SEL_CRTC1; + fp_gen_cntl &= ~RADEON_FP_SEL_CRTC2; } else { if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) { fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK; -- GitLab From 37c72e56f6b234ea7387ba530434a80abf2658d8 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 14 Oct 2009 10:15:55 -0700 Subject: [PATCH 0057/1165] rcu: Prevent RCU IPI storms in presence of high call_rcu() load As the number of callbacks on a given CPU rises, invoke force_quiescent_state() only every blimit number of callbacks (defaults to 10,000), and even then only if no other CPU has invoked force_quiescent_state() in the meantime. This should fix the performance regression reported by Nick. Reported-by: Nick Piggin Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: jens.axboe@oracle.com LKML-Reference: <12555405592133-git-send-email-> Signed-off-by: Ingo Molnar --- kernel/rcutree.c | 29 ++++++++++++++++++++++++----- kernel/rcutree.h | 4 ++++ 2 files changed, 28 insertions(+), 5 deletions(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 705f02ac743..ddbf111e9e1 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -958,7 +958,7 @@ static void rcu_offline_cpu(int cpu) * Invoke any RCU callbacks that have made it to the end of their grace * period. Thottle as specified by rdp->blimit. */ -static void rcu_do_batch(struct rcu_data *rdp) +static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp) { unsigned long flags; struct rcu_head *next, *list, **tail; @@ -1011,6 +1011,13 @@ static void rcu_do_batch(struct rcu_data *rdp) if (rdp->blimit == LONG_MAX && rdp->qlen <= qlowmark) rdp->blimit = blimit; + /* Reset ->qlen_last_fqs_check trigger if enough CBs have drained. */ + if (rdp->qlen == 0 && rdp->qlen_last_fqs_check != 0) { + rdp->qlen_last_fqs_check = 0; + rdp->n_force_qs_snap = rsp->n_force_qs; + } else if (rdp->qlen < rdp->qlen_last_fqs_check - qhimark) + rdp->qlen_last_fqs_check = rdp->qlen; + local_irq_restore(flags); /* Re-raise the RCU softirq if there are callbacks remaining. */ @@ -1224,7 +1231,7 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) } /* If there are callbacks ready, invoke them. */ - rcu_do_batch(rdp); + rcu_do_batch(rsp, rdp); } /* @@ -1288,10 +1295,20 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), rcu_start_gp(rsp, nestflag); /* releases rnp_root->lock. */ } - /* Force the grace period if too many callbacks or too long waiting. */ - if (unlikely(++rdp->qlen > qhimark)) { + /* + * Force the grace period if too many callbacks or too long waiting. + * Enforce hysteresis, and don't invoke force_quiescent_state() + * if some other CPU has recently done so. Also, don't bother + * invoking force_quiescent_state() if the newly enqueued callback + * is the only one waiting for a grace period to complete. + */ + if (unlikely(++rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) { rdp->blimit = LONG_MAX; - force_quiescent_state(rsp, 0); + if (rsp->n_force_qs == rdp->n_force_qs_snap && + *rdp->nxttail[RCU_DONE_TAIL] != head) + force_quiescent_state(rsp, 0); + rdp->n_force_qs_snap = rsp->n_force_qs; + rdp->qlen_last_fqs_check = rdp->qlen; } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0) force_quiescent_state(rsp, 1); local_irq_restore(flags); @@ -1523,6 +1540,8 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptable) rdp->beenonline = 1; /* We have now been online. */ rdp->preemptable = preemptable; rdp->passed_quiesc_completed = lastcomp - 1; + rdp->qlen_last_fqs_check = 0; + rdp->n_force_qs_snap = rsp->n_force_qs; rdp->blimit = blimit; spin_unlock(&rnp->lock); /* irqs remain disabled. */ diff --git a/kernel/rcutree.h b/kernel/rcutree.h index b40ac570604..599161f309f 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -167,6 +167,10 @@ struct rcu_data { struct rcu_head *nxtlist; struct rcu_head **nxttail[RCU_NEXT_SIZE]; long qlen; /* # of queued callbacks */ + long qlen_last_fqs_check; + /* qlen at last check for QS forcing */ + unsigned long n_force_qs_snap; + /* did other CPU force QS recently? */ long blimit; /* Upper limit on a processed batch */ #ifdef CONFIG_NO_HZ -- GitLab From 019129d595caaa5bd0b41d128308da1be6a91869 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 14 Oct 2009 10:15:56 -0700 Subject: [PATCH 0058/1165] rcu: Stopgap fix for synchronize_rcu_expedited() for TREE_PREEMPT_RCU For the short term, map synchronize_rcu_expedited() to synchronize_rcu() for TREE_PREEMPT_RCU and to synchronize_sched_expedited() for TREE_RCU. Longer term, there needs to be a real expedited grace period for TREE_PREEMPT_RCU, but candidate patches to date are considerably more complex and intrusive. Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: npiggin@suse.de Cc: jens.axboe@oracle.com LKML-Reference: <12555405592331-git-send-email-> Signed-off-by: Ingo Molnar --- include/linux/rcutree.h | 6 +----- kernel/rcutree_plugin.h | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 46e9ab3ee6e..9642c6bcb39 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -76,11 +76,7 @@ static inline void __rcu_read_unlock_bh(void) extern void call_rcu_sched(struct rcu_head *head, void (*func)(struct rcu_head *rcu)); - -static inline void synchronize_rcu_expedited(void) -{ - synchronize_sched_expedited(); -} +extern void synchronize_rcu_expedited(void); static inline void synchronize_rcu_bh_expedited(void) { diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index c0cb783aa16..ebd20ee7707 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -392,6 +392,17 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) } EXPORT_SYMBOL_GPL(call_rcu); +/* + * Wait for an rcu-preempt grace period. We are supposed to expedite the + * grace period, but this is the crude slow compatability hack, so just + * invoke synchronize_rcu(). + */ +void synchronize_rcu_expedited(void) +{ + synchronize_rcu(); +} +EXPORT_SYMBOL_GPL(synchronize_rcu_expedited); + /* * Check to see if there is any immediate preemptable-RCU-related work * to be done. @@ -564,6 +575,16 @@ void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu)) } EXPORT_SYMBOL_GPL(call_rcu); +/* + * Wait for an rcu-preempt grace period, but make it happen quickly. + * But because preemptable RCU does not exist, map to rcu-sched. + */ +void synchronize_rcu_expedited(void) +{ + synchronize_sched_expedited(); +} +EXPORT_SYMBOL_GPL(synchronize_rcu_expedited); + /* * Because preemptable RCU does not exist, it never has any work to do. */ -- GitLab From daaeb6c93829806221b2ac533330c64f338ebb89 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 15 Oct 2009 15:06:47 +0100 Subject: [PATCH 0059/1165] ARM: 5763/1: ARM: SMP: Fix the BUG with CONFIG_PREEMPT enabled This patch fixes the BUG: using smp_processor_id() in preemptible Below is the stripped backtrace. BUG: using smp_processor_id() in preemptible [00000000] code: init/1 caller is flush_tlb_mm+0x44/0x70 Backtrace: [] (dump_backtrace+0x0/0x110) from [] (dump_stack+0x18/0x1c) r7:00000000 r6:c00234f0 r5:00000001 r4:c7828000 [] (dump_stack+0x0/0x1c) from [] (debug_smp_processor_id+0xc0/0xf0) [] (debug_smp_processor_id+0x0/0xf0) from [] (flush_tlb_mm+0x44/0x70) r7:00000000 r6:c60b41a0 r5:c60b4154 r4:00000001 [] (flush_tlb_mm+0x0/0x70) from [] (dup_mm+0x304/0x38c) r5:c1f09058 r4:00000000 [] (dup_mm+0x0/0x38c) from [] (copy_process+0x7b8/0xeb0) [] (copy_process+0x0/0xeb0) from [] (do_fork+0x15c/0x29c) [] (do_fork+0x0/0x29c) from [] (sys_clone+0x34/0x3c) [] (sys_clone+0x0/0x3c) from [] (ret_fast_syscall+0x0/0x2c) Signed-off-by: Santosh Shilimkar Signed-off-by: Russell King --- arch/arm/include/asm/tlbflush.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index a45ab5dd825..c2f1605de35 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_WB)) dsb(); - if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) { + if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) { if (tlb_flag(TLB_V3_FULL)) asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc"); if (tlb_flag(TLB_V4_U_FULL)) @@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) if (tlb_flag(TLB_V4_I_FULL)) asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc"); } + put_cpu(); if (tlb_flag(TLB_V6_U_ASID)) asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc"); -- GitLab From 371bc96b89467c89c07a75aa4331bb8327afdc30 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Thu, 15 Oct 2009 09:29:32 -0600 Subject: [PATCH 0060/1165] mpc5200: support for the MAN mpc5200 based board uc101 - serial Console on PSC1 - 64MB SDRAM - MTD CFI Flash - Ethernet FEC - I2C with PCF8563 and Temp. Sensor ADM9240 - IDE support Signed-off-by: Heiko Schocher Reviewed-by: Wolfram Sang Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/uc101.dts | 284 +++++++++++++++++++ arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 + 2 files changed, 285 insertions(+) create mode 100644 arch/powerpc/boot/dts/uc101.dts diff --git a/arch/powerpc/boot/dts/uc101.dts b/arch/powerpc/boot/dts/uc101.dts new file mode 100644 index 00000000000..019264c6290 --- /dev/null +++ b/arch/powerpc/boot/dts/uc101.dts @@ -0,0 +1,284 @@ +/* + * Manroland uc101 board Device Tree Source + * + * Copyright (C) 2009 DENX Software Engineering GmbH + * Heiko Schocher + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "manroland,uc101"; + compatible = "manroland,uc101"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + gpt0: timer@600 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt1: timer@610 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt2: timer@620 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt3: timer@630 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt4: timer@640 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt5: timer@650 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt6: timer@660 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt7: timer@670 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { /* PSC1 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2200 { /* PSC2 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + serial@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + compatible = "intel,lxt971"; + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + fsl,preserve-clocking; + clock-frequency = <400000>; + + hwmon@2c { + compatible = "ad,adm9240"; + reg = <0x2c>; + }; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xff800000 0x00800000 + 1 0 0x80000000 0x00800000 + 3 0 0x80000000 0x00800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "DTS"; + reg = <0x0 0x00100000>; + }; + partition@100000 { + label = "Kernel"; + reg = <0x100000 0x00200000>; + }; + partition@300000 { + label = "RootFS"; + reg = <0x00300000 0x00200000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00200000>; + }; + partition@700000 { + label = "U-Boot"; + reg = <0x00700000 0x00040000>; + }; + partition@740000 { + label = "Env"; + reg = <0x00740000 0x00010000>; + }; + partition@750000 { + label = "red. Env"; + reg = <0x00750000 0x00010000>; + }; + partition@760000 { + label = "reserve"; + reg = <0x00760000 0x000a0000>; + }; + }; + + }; +}; diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index c31e5b534f0..caf6d92a4b8 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -51,6 +51,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static char *board[] __initdata = { "intercontrol,digsy-mtc", + "manroland,uc101", "phytec,pcm030", "phytec,pcm032", "promess,motionpro", -- GitLab From 830cb6fafc12af6c105aaaf794543e4423ca79c3 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Thu, 15 Oct 2009 09:33:24 -0600 Subject: [PATCH 0061/1165] mpc5200: support for the MAN mpc5200 based board mucmc52 - serial Console on PSC1 - 64MB SDRAM - MTD CFI Flash - Ethernet FEC - IDE support Signed-off-by: Heiko Schocher Reviewed-by: Wolfram Sang Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/mucmc52.dts | 332 +++++++++++++++++++ arch/powerpc/configs/mpc5200_defconfig | 2 +- arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 + 3 files changed, 334 insertions(+), 1 deletion(-) create mode 100644 arch/powerpc/boot/dts/mucmc52.dts diff --git a/arch/powerpc/boot/dts/mucmc52.dts b/arch/powerpc/boot/dts/mucmc52.dts new file mode 100644 index 00000000000..b72a7581d79 --- /dev/null +++ b/arch/powerpc/boot/dts/mucmc52.dts @@ -0,0 +1,332 @@ +/* + * Manroland mucmc52 board Device Tree Source + * + * Copyright (C) 2009 DENX Software Engineering GmbH + * Heiko Schocher + * Copyright 2006-2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "manroland,mucmc52"; + compatible = "manroland,mucmc52"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x04000000>; // 64MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + gpt0: timer@600 { // GPT 0 in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt1: timer@610 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt2: timer@620 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt3: timer@630 { // General Purpose Timer in GPIO mode + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2000 { /* PSC1 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + serial@2200 { /* PSC2 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + serial@2c00 { /* PSC6 in UART mode */ + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + compatible = "intel,lxt971"; + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + hwmon@2c { + compatible = "ad,adm9240"; + reg = <0x2c>; + }; + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x10 */ + 0x8000 0 0 1 &mpc5200_pic 0 3 3 + 0x8000 0 0 2 &mpc5200_pic 0 3 3 + 0x8000 0 0 3 &mpc5200_pic 0 2 3 + 0x8000 0 0 4 &mpc5200_pic 0 1 3 + >; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0xff800000 0x00800000 + 1 0 0x80000000 0x00800000 + 3 0 0x80000000 0x00800000>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <4>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + partition@0 { + label = "DTS"; + reg = <0x0 0x00100000>; + }; + partition@100000 { + label = "Kernel"; + reg = <0x100000 0x00200000>; + }; + partition@300000 { + label = "RootFS"; + reg = <0x00300000 0x00200000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00200000>; + }; + partition@700000 { + label = "U-Boot"; + reg = <0x00700000 0x00040000>; + }; + partition@740000 { + label = "Env"; + reg = <0x00740000 0x00020000>; + }; + partition@760000 { + label = "red. Env"; + reg = <0x00760000 0x00020000>; + }; + partition@780000 { + label = "reserve"; + reg = <0x00780000 0x00080000>; + }; + }; + + simple100: gpio-controller-100@3,600100 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600100 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple104: gpio-controller-104@3,600104 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600104 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple200: gpio-controller-200@3,600200 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600200 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple201: gpio-controller-201@3,600201 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600201 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple202: gpio-controller-202@3,600202 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600202 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple203: gpio-controller-203@3,600203 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600203 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple204: gpio-controller-204@3,600204 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600204 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple206: gpio-controller-206@3,600206 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600206 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple207: gpio-controller-207@3,600207 { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x00600207 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + simple20f: gpio-controller-20f@3,60020f { + compatible = "manroland,mucmc52-aux-gpio"; + reg = <3 0x0060020f 0x1>; + gpio-controller; + #gpio-cells = <2>; + }; + + }; +}; diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index aaa4416660e..d0354211565 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -205,7 +205,7 @@ CONFIG_RTAS_PROC=y CONFIG_PPC_BESTCOMM=y CONFIG_PPC_BESTCOMM_ATA=y CONFIG_PPC_BESTCOMM_FEC=y -# CONFIG_SIMPLE_GPIO is not set +CONFIG_SIMPLE_GPIO=y # # Kernel options diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index caf6d92a4b8..d45be5b5ad4 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -51,6 +51,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static char *board[] __initdata = { "intercontrol,digsy-mtc", + "manroland,mucmc52", "manroland,uc101", "phytec,pcm030", "phytec,pcm032", -- GitLab From 08a7963aad03b5cf515f1e9c35e0ac9eb7dae072 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=A9r=C3=B4me=20Pouiller?= Date: Thu, 15 Oct 2009 09:58:27 -0600 Subject: [PATCH 0062/1165] of: Remove nested function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some toolchains dislike nested function definition, so we define function match outside of of_phy_find_device. Signed-off-by: Jérôme Pouiller Acked-by: David S. Miller Signed-off-by: Grant Likely --- drivers/of/of_mdio.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index bacaa536fd5..4b22ba568b1 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -97,6 +97,12 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) } EXPORT_SYMBOL(of_mdiobus_register); +/* Helper function for of_phy_find_device */ +static int of_phy_match(struct device *dev, void *phy_np) +{ + return dev_archdata_get_node(&dev->archdata) == phy_np; +} + /** * of_phy_find_device - Give a PHY node, find the phy_device * @phy_np: Pointer to the phy's device tree node @@ -106,15 +112,10 @@ EXPORT_SYMBOL(of_mdiobus_register); struct phy_device *of_phy_find_device(struct device_node *phy_np) { struct device *d; - int match(struct device *dev, void *phy_np) - { - return dev_archdata_get_node(&dev->archdata) == phy_np; - } - if (!phy_np) return NULL; - d = bus_find_device(&mdio_bus_type, NULL, phy_np, match); + d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match); return d ? to_phy_device(d) : NULL; } EXPORT_SYMBOL(of_phy_find_device); -- GitLab From db467ebd1fb0ff17df30a78d87c6cda4ea7b21c2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 15 Oct 2009 09:58:27 -0600 Subject: [PATCH 0063/1165] powerpc/boot/dts: drop obsolete 'fsl5200-clocking' The 'fsl5200-clocking'-property was dropped since 0d1cde235874b00905bce23f659690d060ebf475. Remove all occurences in dts-files. Signed-off-by: Wolfram Sang Signed-off-by: Grant Likely --- arch/powerpc/boot/dts/cm5200.dts | 1 - arch/powerpc/boot/dts/digsy_mtc.dts | 1 - arch/powerpc/boot/dts/lite5200.dts | 2 -- arch/powerpc/boot/dts/lite5200b.dts | 2 -- arch/powerpc/boot/dts/media5200.dts | 2 -- arch/powerpc/boot/dts/motionpro.dts | 1 - arch/powerpc/boot/dts/mpc5121ads.dts | 3 --- arch/powerpc/boot/dts/pcm030.dts | 2 -- arch/powerpc/boot/dts/pcm032.dts | 2 -- arch/powerpc/boot/dts/tqm5200.dts | 1 - 10 files changed, 17 deletions(-) diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index cee8080aa24..dd3860846f1 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -210,7 +210,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; }; sram@8000 { diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts index 4c36186ef94..8e9be6bfe23 100644 --- a/arch/powerpc/boot/dts/digsy_mtc.dts +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -199,7 +199,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; rtc@50 { compatible = "at,24c08"; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index de30b3f9eb2..82ff2b13bc3 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -247,7 +247,6 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; }; i2c@3d40 { @@ -256,7 +255,6 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; }; sram@8000 { compatible = "fsl,mpc5200-sram"; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index d13cb11ce62..e45a63be3a8 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -251,7 +251,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; }; i2c@3d40 { @@ -260,7 +259,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; }; sram@8000 { diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts index e297d8b4187..0c3902bc5b6 100644 --- a/arch/powerpc/boot/dts/media5200.dts +++ b/arch/powerpc/boot/dts/media5200.dts @@ -223,7 +223,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; }; i2c@3d40 { @@ -232,7 +231,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; }; sram@8000 { diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 7be8ca03867..6ca4fc144a3 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -222,7 +222,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; rtc@68 { compatible = "dallas,ds1339"; diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index c2b8dbfab79..c353dac3341 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -209,7 +209,6 @@ reg = <0x1700 0x20>; interrupts = <9 0x8>; interrupt-parent = < &ipic >; - fsl5200-clocking; }; i2c@1720 { @@ -220,7 +219,6 @@ reg = <0x1720 0x20>; interrupts = <10 0x8>; interrupt-parent = < &ipic >; - fsl5200-clocking; }; i2c@1740 { @@ -231,7 +229,6 @@ reg = <0x1740 0x20>; interrupts = <11 0x8>; interrupt-parent = < &ipic >; - fsl5200-clocking; }; i2ccontrol@1760 { diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index 30bfdc04c6d..8a4ec30b21a 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -244,7 +244,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; }; i2c@3d40 { @@ -253,7 +252,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts index 03004267839..85d857a5d46 100644 --- a/arch/powerpc/boot/dts/pcm032.dts +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -244,7 +244,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - fsl5200-clocking; }; i2c@3d40 { @@ -253,7 +252,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index c9590b58b7b..1db07f6cf13 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -160,7 +160,6 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - fsl5200-clocking; rtc@68 { compatible = "dallas,ds1307"; -- GitLab From b7a8212cae06f3bfa810f941f455bd8bb9aa8528 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 15 Oct 2009 09:58:28 -0600 Subject: [PATCH 0064/1165] drivers/serial/mpc52xx_uart.c: Use UPIO_MEM rather than SERIAL_IO_MEM As in the commit 9b4a1617772d6d5ab5eeda0cd95302fae119e359, use UPIO_MEM rather than SERIAL_IO_MEM. Both have the same value. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // @has_sc@ @@ #include @depends on has_sc@ @@ - SERIAL_IO_MEM + UPIO_MEM // Signed-off-by: Julia Lawall Signed-off-by: Grant Likely --- drivers/serial/mpc52xx_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index d7bcd074d38..7ce9e9f567a 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -705,7 +705,7 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser) return -EINVAL; if ((ser->irq != port->irq) || - (ser->io_type != SERIAL_IO_MEM) || + (ser->io_type != UPIO_MEM) || (ser->baud_base != port->uartclk) || (ser->iomem_base != (void *)port->mapbase) || (ser->hub6 != 0)) -- GitLab From 0eb96d6ed38430b72897adde58f5477a6b71757a Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 14 Oct 2009 12:33:41 -0700 Subject: [PATCH 0065/1165] drm/i915: save/restore BLC histogram control reg across suspend/resume Turns out some machines, like the ThinkPad X40 don't come back if you don't save/restore this register. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/i915_suspend.c | 2 ++ 3 files changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 24e154e4722..f6a3587ad06 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -304,6 +304,7 @@ typedef struct drm_i915_private { u32 saveDSPASURF; u32 saveDSPATILEOFF; u32 savePFIT_PGM_RATIOS; + u32 saveBLC_HIST_CTL; u32 saveBLC_PWM_CTL; u32 saveBLC_PWM_CTL2; u32 saveFPB0; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 0dd87a7309e..b4813586d92 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1080,6 +1080,8 @@ #define BACKLIGHT_DUTY_CYCLE_SHIFT (0) #define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) +#define BLC_HIST_CTL 0x61260 + /* TV port control */ #define TV_CTL 0x68000 /** Enables the TV encoder */ diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 660c5f36424..75c5bed48be 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -410,6 +410,7 @@ void i915_save_display(struct drm_device *dev) dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL); if (IS_I965G(dev)) dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); if (IS_MOBILE(dev) && !IS_I830(dev)) @@ -501,6 +502,7 @@ void i915_restore_display(struct drm_device *dev) I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL); I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); -- GitLab From 0d9c778978ff268228c095ae737c282c03a5986d Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 14 Oct 2009 20:12:46 +0100 Subject: [PATCH 0066/1165] drm/i915: Install a fence register for fbc on g4x To enable framebuffer compression on a g4x, we not only need the buffer to tiled (X only), we also need to hold a fence register for the buffer. Currently we only install a fence register for pre-i965s when setting up the scanout buffer. Rather than adding some convoluted logic to g4x_enable_fbc() to acquire a fence register, and perhaps to g4x_disable_fbc() to release it again, we can extend the acquisition during setup to all chipsets. Signed-off-by: Chris Wilson Cc: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 8278d9d163a..123cce1ae47 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1260,9 +1260,11 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, return ret; } - /* Pre-i965 needs to install a fence for tiled scan-out */ - if (!IS_I965G(dev) && - obj_priv->fence_reg == I915_FENCE_REG_NONE && + /* Install a fence for tiled scan-out. Pre-i965 always needs a fence, + * whereas 965+ only requires a fence if using framebuffer compression. + * For simplicity, we always install a fence as the cost is not that onerous. + */ + if (obj_priv->fence_reg == I915_FENCE_REG_NONE && obj_priv->tiling_mode != I915_TILING_NONE) { ret = i915_gem_object_get_fence_reg(obj); if (ret != 0) { -- GitLab From 4bdf0bb7d64cf672199519b3d808e2a82f5b59e9 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 15 Oct 2009 10:40:47 -0600 Subject: [PATCH 0067/1165] powerpc/5200: Update defconfigs Signed-off-by: Grant Likely --- arch/powerpc/configs/52xx/cm5200_defconfig | 136 ++++++++----- arch/powerpc/configs/52xx/lite5200b_defconfig | 153 +++++++++----- arch/powerpc/configs/52xx/motionpro_defconfig | 146 +++++++++----- arch/powerpc/configs/52xx/pcm030_defconfig | 142 +++++++------ arch/powerpc/configs/52xx/tqm5200_defconfig | 148 ++++++++------ arch/powerpc/configs/mpc5200_defconfig | 190 ++++++++++++------ 6 files changed, 569 insertions(+), 346 deletions(-) diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 3838b77b811..0396ce7bffc 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 00:47:44 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:22 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -118,6 +124,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -140,7 +158,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -219,11 +237,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -239,9 +259,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -252,6 +273,7 @@ CONFIG_PROC_DEVICETREE=y CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -328,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -342,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -367,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -457,6 +482,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -495,10 +521,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -519,7 +541,6 @@ CONFIG_CHR_DEV_SG=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -558,14 +579,14 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -636,6 +657,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -646,6 +668,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -666,23 +689,23 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -713,25 +736,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -775,11 +785,12 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set @@ -866,6 +877,10 @@ CONFIG_USB_STORAGE=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -885,10 +900,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -959,12 +977,12 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1064,6 +1082,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1073,6 +1092,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1090,10 +1110,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1105,11 +1129,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1118,23 +1143,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1159,7 +1186,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1200,11 +1226,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index 29b0f34488f..f5c07fd7223 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 00:48:04 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:24 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,12 +56,14 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -78,11 +84,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -106,7 +113,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -119,6 +125,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -127,14 +140,19 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -147,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -228,11 +246,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -248,9 +268,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -264,6 +285,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -348,6 +370,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -362,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -387,6 +411,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -397,6 +422,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -431,7 +457,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -454,10 +482,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -475,6 +499,8 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -483,6 +509,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -502,7 +529,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -514,11 +540,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -540,6 +569,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -568,6 +598,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -586,14 +617,17 @@ CONFIG_PATA_MPC52xx=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -640,9 +674,12 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -661,6 +698,8 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set @@ -686,10 +725,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -759,6 +795,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -787,6 +824,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -812,23 +850,23 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -847,30 +885,18 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -913,6 +939,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -932,10 +962,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -992,12 +1025,12 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1041,6 +1074,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1050,6 +1084,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1067,10 +1102,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1082,11 +1121,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1095,23 +1135,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1136,7 +1178,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1178,11 +1219,13 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index 07b6b266ea9..4f77a1bdc8f 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 00:48:22 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:22 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -118,6 +124,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -140,7 +158,7 @@ CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -220,11 +238,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -240,9 +260,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -253,6 +274,7 @@ CONFIG_PROC_DEVICETREE=y CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -329,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -343,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -368,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -458,6 +483,7 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -483,6 +509,7 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -506,10 +533,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -532,6 +555,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set @@ -540,7 +564,6 @@ CONFIG_PATA_MPC52xx=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -579,14 +602,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -647,6 +670,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -657,6 +681,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -676,22 +701,28 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -738,6 +769,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -747,9 +780,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -775,25 +806,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -817,7 +835,7 @@ CONFIG_LEDS_CLASS=y # # LED drivers # -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set @@ -866,6 +884,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -893,6 +912,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -912,10 +935,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -986,12 +1012,12 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1091,6 +1117,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1100,6 +1127,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1117,10 +1145,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1132,11 +1164,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1145,23 +1178,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1186,7 +1221,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1227,11 +1261,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index afb1a3d1ef0..f9168c1a2fa 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 00:48:42 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:25 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -79,11 +85,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -105,7 +112,6 @@ CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -118,6 +124,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_PCI_QUIRKS=y CONFIG_COMPAT_BRK=y @@ -125,7 +138,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -133,7 +145,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -146,7 +164,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -227,11 +245,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -247,9 +267,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -336,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -350,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -375,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -382,9 +406,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -467,6 +491,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set # CONFIG_MISC_DEVICES is not set @@ -492,10 +517,6 @@ CONFIG_BLK_DEV_SD=m # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -515,6 +536,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -536,6 +558,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -564,6 +587,7 @@ CONFIG_PATA_MPC52xx=m # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -582,14 +606,17 @@ CONFIG_PATA_MPC52xx=m # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -636,16 +663,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -722,6 +749,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -750,6 +778,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -776,23 +805,23 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -811,30 +840,18 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -871,15 +888,17 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_HCD_PPC_SOC is not set -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y # CONFIG_USB_OHCI_HCD_PCI is not set CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -995,6 +1014,7 @@ CONFIG_RTC_DRV_PCF8563=m # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1022,6 +1042,10 @@ CONFIG_RTC_DRV_PCF8563=m # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1041,12 +1065,16 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -1114,7 +1142,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1210,6 +1238,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1223,23 +1252,12 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 8585c7c1286..75c835c2ae6 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Sat Apr 18 00:48:57 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:23 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y @@ -52,11 +56,13 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -77,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -105,7 +112,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -118,6 +124,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -125,14 +138,19 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -145,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -225,11 +243,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -245,9 +265,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -258,6 +279,7 @@ CONFIG_PROC_DEVICETREE=y CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -334,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -348,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -373,6 +397,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -382,9 +407,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -464,6 +489,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -502,10 +528,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -529,6 +551,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set @@ -538,7 +561,6 @@ CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -577,14 +599,14 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -654,6 +676,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -664,6 +687,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -685,22 +709,28 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -747,6 +777,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -756,9 +788,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -789,25 +819,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -851,11 +868,12 @@ CONFIG_USB_MON=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set @@ -969,6 +987,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -996,6 +1015,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1015,10 +1038,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1089,12 +1115,12 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1194,6 +1220,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1203,6 +1230,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1220,10 +1248,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1235,11 +1267,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1248,23 +1281,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1289,7 +1324,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1331,11 +1365,13 @@ CONFIG_CRYPTO_PCBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index d0354211565..523d5fe18c0 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc2 -# Mon Apr 20 11:06:25 2009 +# Linux kernel version: 2.6.32-rc4 +# Thu Oct 15 10:33:21 2009 # # CONFIG_PPC64 is not set # # Processor support # -CONFIG_6xx=y +CONFIG_PPC_BOOK3S_32=y # CONFIG_PPC_85xx is not set # CONFIG_PPC_8xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y # CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 @@ -30,15 +32,17 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set @@ -53,12 +57,14 @@ CONFIG_OF=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y CONFIG_DEFAULT_UIMAGE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -79,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -103,7 +110,6 @@ CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set # CONFIG_KALLSYMS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -116,6 +122,13 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -124,14 +137,19 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y @@ -144,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -229,11 +247,13 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -249,9 +269,10 @@ CONFIG_MIGRATION=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set # CONFIG_PPC_64K_PAGES is not set @@ -265,6 +286,7 @@ CONFIG_PM=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -349,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -363,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -388,6 +412,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -397,9 +422,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -458,6 +483,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -493,6 +519,7 @@ CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y CONFIG_OF_SPI=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -529,7 +556,9 @@ CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -552,10 +581,6 @@ CONFIG_BLK_DEV_SD=y # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -572,6 +597,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -580,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -599,7 +627,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -611,11 +638,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -637,6 +667,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -665,6 +696,7 @@ CONFIG_PATA_MPC52xx=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -684,14 +716,17 @@ CONFIG_PATA_PLATFORM=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -739,16 +774,17 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set CONFIG_FEC_MPC52xx=y CONFIG_FEC_MPC52xx_MDIO=y # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -854,6 +890,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y @@ -883,6 +920,7 @@ CONFIG_I2C_ALGOBIT=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set @@ -910,10 +948,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -935,6 +969,11 @@ CONFIG_SPI_MPC52xx_PSC=m # CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -957,16 +996,27 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -1019,6 +1069,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1031,9 +1083,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1073,31 +1123,20 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set @@ -1167,6 +1206,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LMS283GF05 is not set # CONFIG_LCD_LTV350QV is not set # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_TDO24M is not set @@ -1198,7 +1238,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1217,10 +1256,11 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y # CONFIG_HID_CHICONY is not set CONFIG_HID_CYPRESS=y -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1231,10 +1271,11 @@ CONFIG_HID_EZKEY=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1261,15 +1302,17 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_SOC=y -CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y @@ -1400,6 +1443,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1411,6 +1455,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1434,6 +1479,10 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1453,10 +1502,13 @@ CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1533,12 +1585,12 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y @@ -1624,6 +1676,7 @@ CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y # # Kernel hacking @@ -1633,6 +1686,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1650,10 +1704,14 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1665,11 +1723,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1678,23 +1737,25 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# +CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_STACK_TRACER is not set # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1719,7 +1780,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1761,11 +1821,13 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set -- GitLab From 1456edbb1476db735715ddcc7ac306de587024eb Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Thu, 15 Oct 2009 11:03:20 -0700 Subject: [PATCH 0068/1165] kconfig: Make zconf.y work with current bison zconf.y includes zconf.hash.c from the initial code section. zconf.hash.c references the token constants from zconf.y. However, current bison defines the token constants after the initial code section, making zconf.hash.c fail to compile. Move the include of zconf.hash.c later in zconf.y, so bison puts it after the token constants. Signed-off-by: Josh Triplett --- scripts/kconfig/zconf.tab.c_shipped | 373 +++++++++++++--------------- scripts/kconfig/zconf.y | 7 +- 2 files changed, 174 insertions(+), 206 deletions(-) diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped index 95df833b5a9..c42b439c5cc 100644 --- a/scripts/kconfig/zconf.tab.c_shipped +++ b/scripts/kconfig/zconf.tab.c_shipped @@ -1,24 +1,23 @@ -/* A Bison parser, made by GNU Bison 2.3. */ -/* Skeleton implementation for Bison's Yacc-like parsers in C +/* A Bison parser, made by GNU Bison 2.4.1. */ - Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 +/* Skeleton implementation for Bison's Yacc-like parsers in C + + Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify + + This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ + along with this program. If not, see . */ /* As a special exception, you may create a larger work that contains part or all of the Bison parser skeleton and distribute that work @@ -29,7 +28,7 @@ special exception, which will cause the skeleton and the resulting Bison output files to be licensed under the GNU General Public License without this special exception. - + This special exception was added by the Free Software Foundation in version 2.2 of Bison. */ @@ -47,7 +46,7 @@ #define YYBISON 1 /* Bison version. */ -#define YYBISON_VERSION "2.3" +#define YYBISON_VERSION "2.4.1" /* Skeleton name. */ #define YYSKELETON_NAME "yacc.c" @@ -55,94 +54,23 @@ /* Pure parsers. */ #define YYPURE 0 +/* Push parsers. */ +#define YYPUSH 0 + +/* Pull parsers. */ +#define YYPULL 1 + /* Using locations. */ #define YYLSP_NEEDED 0 /* Substitute the variable and function names. */ -#define yyparse zconfparse -#define yylex zconflex -#define yyerror zconferror -#define yylval zconflval -#define yychar zconfchar -#define yydebug zconfdebug -#define yynerrs zconfnerrs - - -/* Tokens. */ -#ifndef YYTOKENTYPE -# define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - T_MAINMENU = 258, - T_MENU = 259, - T_ENDMENU = 260, - T_SOURCE = 261, - T_CHOICE = 262, - T_ENDCHOICE = 263, - T_COMMENT = 264, - T_CONFIG = 265, - T_MENUCONFIG = 266, - T_HELP = 267, - T_HELPTEXT = 268, - T_IF = 269, - T_ENDIF = 270, - T_DEPENDS = 271, - T_OPTIONAL = 272, - T_PROMPT = 273, - T_TYPE = 274, - T_DEFAULT = 275, - T_SELECT = 276, - T_RANGE = 277, - T_OPTION = 278, - T_ON = 279, - T_WORD = 280, - T_WORD_QUOTE = 281, - T_UNEQUAL = 282, - T_CLOSE_PAREN = 283, - T_OPEN_PAREN = 284, - T_EOL = 285, - T_OR = 286, - T_AND = 287, - T_EQUAL = 288, - T_NOT = 289 - }; -#endif -/* Tokens. */ -#define T_MAINMENU 258 -#define T_MENU 259 -#define T_ENDMENU 260 -#define T_SOURCE 261 -#define T_CHOICE 262 -#define T_ENDCHOICE 263 -#define T_COMMENT 264 -#define T_CONFIG 265 -#define T_MENUCONFIG 266 -#define T_HELP 267 -#define T_HELPTEXT 268 -#define T_IF 269 -#define T_ENDIF 270 -#define T_DEPENDS 271 -#define T_OPTIONAL 272 -#define T_PROMPT 273 -#define T_TYPE 274 -#define T_DEFAULT 275 -#define T_SELECT 276 -#define T_RANGE 277 -#define T_OPTION 278 -#define T_ON 279 -#define T_WORD 280 -#define T_WORD_QUOTE 281 -#define T_UNEQUAL 282 -#define T_CLOSE_PAREN 283 -#define T_OPEN_PAREN 284 -#define T_EOL 285 -#define T_OR 286 -#define T_AND 287 -#define T_EQUAL 288 -#define T_NOT 289 - - +#define yyparse zconfparse +#define yylex zconflex +#define yyerror zconferror +#define yylval zconflval +#define yychar zconfchar +#define yydebug zconfdebug +#define yynerrs zconfnerrs /* Copy the first part of user declarations. */ @@ -163,8 +91,6 @@ #define LKC_DIRECT_LINK #include "lkc.h" -#include "zconf.hash.c" - #define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt) #define PRINTD 0x0001 @@ -188,6 +114,7 @@ static struct menu *current_menu, *current_entry; #endif + /* Enabling traces. */ #ifndef YYDEBUG # define YYDEBUG 0 @@ -206,31 +133,77 @@ static struct menu *current_menu, *current_entry; # define YYTOKEN_TABLE 0 #endif + +/* Tokens. */ +#ifndef YYTOKENTYPE +# define YYTOKENTYPE + /* Put the tokens into the symbol table, so that GDB and other debuggers + know about them. */ + enum yytokentype { + T_MAINMENU = 258, + T_MENU = 259, + T_ENDMENU = 260, + T_SOURCE = 261, + T_CHOICE = 262, + T_ENDCHOICE = 263, + T_COMMENT = 264, + T_CONFIG = 265, + T_MENUCONFIG = 266, + T_HELP = 267, + T_HELPTEXT = 268, + T_IF = 269, + T_ENDIF = 270, + T_DEPENDS = 271, + T_OPTIONAL = 272, + T_PROMPT = 273, + T_TYPE = 274, + T_DEFAULT = 275, + T_SELECT = 276, + T_RANGE = 277, + T_OPTION = 278, + T_ON = 279, + T_WORD = 280, + T_WORD_QUOTE = 281, + T_UNEQUAL = 282, + T_CLOSE_PAREN = 283, + T_OPEN_PAREN = 284, + T_EOL = 285, + T_OR = 286, + T_AND = 287, + T_EQUAL = 288, + T_NOT = 289 + }; +#endif + + + #if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED typedef union YYSTYPE - { + + char *string; struct file *file; struct symbol *symbol; struct expr *expr; struct menu *menu; struct kconf_id *id; -} -/* Line 187 of yacc.c. */ - YYSTYPE; + + +} YYSTYPE; +# define YYSTYPE_IS_TRIVIAL 1 # define yystype YYSTYPE /* obsolescent; will be withdrawn */ # define YYSTYPE_IS_DECLARED 1 -# define YYSTYPE_IS_TRIVIAL 1 #endif - /* Copy the second part of user declarations. */ -/* Line 216 of yacc.c. */ +/* Include zconf.hash.c here so it can see the token constants. */ +#include "zconf.hash.c" + #ifdef short @@ -306,14 +279,14 @@ typedef short int yytype_int16; #if (defined __STDC__ || defined __C99__FUNC__ \ || defined __cplusplus || defined _MSC_VER) static int -YYID (int i) +YYID (int yyi) #else static int -YYID (i) - int i; +YYID (yyi) + int yyi; #endif { - return i; + return yyi; } #endif @@ -394,9 +367,9 @@ void free (void *); /* INFRINGES ON USER NAME SPACE */ /* A type that is properly aligned for any stack member. */ union yyalloc { - yytype_int16 yyss; - YYSTYPE yyvs; - }; + yytype_int16 yyss_alloc; + YYSTYPE yyvs_alloc; +}; /* The size of the maximum gap between one aligned stack and the next. */ # define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) @@ -430,12 +403,12 @@ union yyalloc elements in the stack, and YYPTR gives the new location of the stack. Advance YYPTR to a properly aligned location for the next stack. */ -# define YYSTACK_RELOCATE(Stack) \ +# define YYSTACK_RELOCATE(Stack_alloc, Stack) \ do \ { \ YYSIZE_T yynewbytes; \ - YYCOPY (&yyptr->Stack, Stack, yysize); \ - Stack = &yyptr->Stack; \ + YYCOPY (&yyptr->Stack_alloc, Stack, yysize); \ + Stack = &yyptr->Stack_alloc; \ yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ yyptr += yynewbytes / sizeof (*yyptr); \ } \ @@ -558,18 +531,18 @@ static const yytype_int8 yyrhs[] = /* YYRLINE[YYN] -- source line where rule number YYN was defined. */ static const yytype_uint16 yyrline[] = { - 0, 104, 104, 106, 108, 109, 110, 111, 112, 113, - 114, 118, 122, 122, 122, 122, 122, 122, 122, 126, - 127, 128, 129, 130, 131, 135, 136, 142, 150, 156, - 164, 174, 176, 177, 178, 179, 180, 181, 184, 192, - 198, 208, 214, 220, 223, 225, 236, 237, 242, 251, - 256, 264, 267, 269, 270, 271, 272, 273, 276, 282, - 293, 299, 309, 311, 316, 324, 332, 335, 337, 338, - 339, 344, 351, 356, 364, 367, 369, 370, 371, 374, - 382, 389, 396, 402, 409, 411, 412, 413, 416, 424, - 426, 431, 432, 435, 436, 437, 441, 442, 445, 446, - 449, 450, 451, 452, 453, 454, 455, 458, 459, 462, - 463 + 0, 107, 107, 109, 111, 112, 113, 114, 115, 116, + 117, 121, 125, 125, 125, 125, 125, 125, 125, 129, + 130, 131, 132, 133, 134, 138, 139, 145, 153, 159, + 167, 177, 179, 180, 181, 182, 183, 184, 187, 195, + 201, 211, 217, 223, 226, 228, 239, 240, 245, 254, + 259, 267, 270, 272, 273, 274, 275, 276, 279, 285, + 296, 302, 312, 314, 319, 327, 335, 338, 340, 341, + 342, 347, 354, 359, 367, 370, 372, 373, 374, 377, + 385, 392, 399, 405, 412, 414, 415, 416, 419, 427, + 429, 434, 435, 438, 439, 440, 444, 445, 448, 449, + 452, 453, 454, 455, 456, 457, 458, 461, 462, 465, + 466 }; #endif @@ -985,17 +958,20 @@ yy_symbol_print (yyoutput, yytype, yyvaluep) #if (defined __STDC__ || defined __C99__FUNC__ \ || defined __cplusplus || defined _MSC_VER) static void -yy_stack_print (yytype_int16 *bottom, yytype_int16 *top) +yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop) #else static void -yy_stack_print (bottom, top) - yytype_int16 *bottom; - yytype_int16 *top; +yy_stack_print (yybottom, yytop) + yytype_int16 *yybottom; + yytype_int16 *yytop; #endif { YYFPRINTF (stderr, "Stack now"); - for (; bottom <= top; ++bottom) - YYFPRINTF (stderr, " %d", *bottom); + for (; yybottom <= yytop; yybottom++) + { + int yybot = *yybottom; + YYFPRINTF (stderr, " %d", yybot); + } YYFPRINTF (stderr, "\n"); } @@ -1029,11 +1005,11 @@ yy_reduce_print (yyvsp, yyrule) /* The symbols being reduced. */ for (yyi = 0; yyi < yynrhs; yyi++) { - fprintf (stderr, " $%d = ", yyi + 1); + YYFPRINTF (stderr, " $%d = ", yyi + 1); yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], &(yyvsp[(yyi + 1) - (yynrhs)]) ); - fprintf (stderr, "\n"); + YYFPRINTF (stderr, "\n"); } } @@ -1343,10 +1319,8 @@ yydestruct (yymsg, yytype, yyvaluep) break; } } - /* Prevent warnings from -Wmissing-prototypes. */ - #ifdef YYPARSE_PARAM #if defined __STDC__ || defined __cplusplus int yyparse (void *YYPARSE_PARAM); @@ -1362,11 +1336,10 @@ int yyparse (); #endif /* ! YYPARSE_PARAM */ - -/* The look-ahead symbol. */ +/* The lookahead symbol. */ int yychar; -/* The semantic value of the look-ahead symbol. */ +/* The semantic value of the lookahead symbol. */ YYSTYPE yylval; /* Number of syntax errors so far. */ @@ -1374,9 +1347,9 @@ int yynerrs; -/*----------. -| yyparse. | -`----------*/ +/*-------------------------. +| yyparse or yypush_parse. | +`-------------------------*/ #ifdef YYPARSE_PARAM #if (defined __STDC__ || defined __C99__FUNC__ \ @@ -1400,66 +1373,68 @@ yyparse () #endif #endif { - - int yystate; - int yyn; - int yyresult; - /* Number of tokens to shift before error messages enabled. */ - int yyerrstatus; - /* Look-ahead token as an internal (translated) token number. */ - int yytoken = 0; -#if YYERROR_VERBOSE - /* Buffer for error messages, and its allocated size. */ - char yymsgbuf[128]; - char *yymsg = yymsgbuf; - YYSIZE_T yymsg_alloc = sizeof yymsgbuf; -#endif - - /* Three stacks and their tools: - `yyss': related to states, - `yyvs': related to semantic values, - `yyls': related to locations. - Refer to the stacks thru separate pointers, to allow yyoverflow - to reallocate them elsewhere. */ - /* The state stack. */ - yytype_int16 yyssa[YYINITDEPTH]; - yytype_int16 *yyss = yyssa; - yytype_int16 *yyssp; + int yystate; + /* Number of tokens to shift before error messages enabled. */ + int yyerrstatus; - /* The semantic value stack. */ - YYSTYPE yyvsa[YYINITDEPTH]; - YYSTYPE *yyvs = yyvsa; - YYSTYPE *yyvsp; + /* The stacks and their tools: + `yyss': related to states. + `yyvs': related to semantic values. + Refer to the stacks thru separate pointers, to allow yyoverflow + to reallocate them elsewhere. */ + /* The state stack. */ + yytype_int16 yyssa[YYINITDEPTH]; + yytype_int16 *yyss; + yytype_int16 *yyssp; -#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) + /* The semantic value stack. */ + YYSTYPE yyvsa[YYINITDEPTH]; + YYSTYPE *yyvs; + YYSTYPE *yyvsp; - YYSIZE_T yystacksize = YYINITDEPTH; + YYSIZE_T yystacksize; + int yyn; + int yyresult; + /* Lookahead token as an internal (translated) token number. */ + int yytoken; /* The variables used to return semantic value and location from the action routines. */ YYSTYPE yyval; +#if YYERROR_VERBOSE + /* Buffer for error messages, and its allocated size. */ + char yymsgbuf[128]; + char *yymsg = yymsgbuf; + YYSIZE_T yymsg_alloc = sizeof yymsgbuf; +#endif + +#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) /* The number of symbols on the RHS of the reduced rule. Keep to zero when no symbol should be popped. */ int yylen = 0; + yytoken = 0; + yyss = yyssa; + yyvs = yyvsa; + yystacksize = YYINITDEPTH; + YYDPRINTF ((stderr, "Starting parse\n")); yystate = 0; yyerrstatus = 0; yynerrs = 0; - yychar = YYEMPTY; /* Cause a token to be read. */ + yychar = YYEMPTY; /* Cause a token to be read. */ /* Initialize stack pointers. Waste one element of value and location stack so that they stay on the same level as the state stack. The wasted elements are never initialized. */ - yyssp = yyss; yyvsp = yyvs; @@ -1489,7 +1464,6 @@ yyparse () YYSTYPE *yyvs1 = yyvs; yytype_int16 *yyss1 = yyss; - /* Each stack pointer address is followed by the size of the data in use in that stack, in bytes. This used to be a conditional around just the two extra args, but that might @@ -1497,7 +1471,6 @@ yyparse () yyoverflow (YY_("memory exhausted"), &yyss1, yysize * sizeof (*yyssp), &yyvs1, yysize * sizeof (*yyvsp), - &yystacksize); yyss = yyss1; @@ -1520,9 +1493,8 @@ yyparse () (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); if (! yyptr) goto yyexhaustedlab; - YYSTACK_RELOCATE (yyss); - YYSTACK_RELOCATE (yyvs); - + YYSTACK_RELOCATE (yyss_alloc, yyss); + YYSTACK_RELOCATE (yyvs_alloc, yyvs); # undef YYSTACK_RELOCATE if (yyss1 != yyssa) YYSTACK_FREE (yyss1); @@ -1533,7 +1505,6 @@ yyparse () yyssp = yyss + yysize - 1; yyvsp = yyvs + yysize - 1; - YYDPRINTF ((stderr, "Stack size increased to %lu\n", (unsigned long int) yystacksize)); @@ -1543,6 +1514,9 @@ yyparse () YYDPRINTF ((stderr, "Entering state %d\n", yystate)); + if (yystate == YYFINAL) + YYACCEPT; + goto yybackup; /*-----------. @@ -1551,16 +1525,16 @@ yyparse () yybackup: /* Do appropriate processing given the current state. Read a - look-ahead token if we need one and don't already have one. */ + lookahead token if we need one and don't already have one. */ - /* First try to decide what to do without reference to look-ahead token. */ + /* First try to decide what to do without reference to lookahead token. */ yyn = yypact[yystate]; if (yyn == YYPACT_NINF) goto yydefault; - /* Not known => get a look-ahead token if don't already have one. */ + /* Not known => get a lookahead token if don't already have one. */ - /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol. */ + /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */ if (yychar == YYEMPTY) { YYDPRINTF ((stderr, "Reading a token: ")); @@ -1592,20 +1566,16 @@ yybackup: goto yyreduce; } - if (yyn == YYFINAL) - YYACCEPT; - /* Count tokens shifted since error; after three, turn off error status. */ if (yyerrstatus) yyerrstatus--; - /* Shift the look-ahead token. */ + /* Shift the lookahead token. */ YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); - /* Discard the shifted token unless it is eof. */ - if (yychar != YYEOF) - yychar = YYEMPTY; + /* Discard the shifted token. */ + yychar = YYEMPTY; yystate = yyn; *++yyvsp = yylval; @@ -2029,7 +1999,6 @@ yyreduce: break; -/* Line 1267 of yacc.c. */ default: break; } @@ -2041,7 +2010,6 @@ yyreduce: *++yyvsp = yyval; - /* Now `shift' the result of the reduction. Determine what state that goes to, based on the state we popped back to and the rule number reduced by. */ @@ -2106,7 +2074,7 @@ yyerrlab: if (yyerrstatus == 3) { - /* If just tried and failed to reuse look-ahead token after an + /* If just tried and failed to reuse lookahead token after an error, discard it. */ if (yychar <= YYEOF) @@ -2123,7 +2091,7 @@ yyerrlab: } } - /* Else will try to reuse look-ahead token after shifting the error + /* Else will try to reuse lookahead token after shifting the error token. */ goto yyerrlab1; @@ -2180,9 +2148,6 @@ yyerrlab1: YY_STACK_PRINT (yyss, yyssp); } - if (yyn == YYFINAL) - YYACCEPT; - *++yyvsp = yylval; @@ -2207,7 +2172,7 @@ yyabortlab: yyresult = 1; goto yyreturn; -#ifndef yyoverflow +#if !defined(yyoverflow) || YYERROR_VERBOSE /*-------------------------------------------------. | yyexhaustedlab -- memory exhaustion comes here. | `-------------------------------------------------*/ @@ -2218,7 +2183,7 @@ yyexhaustedlab: #endif yyreturn: - if (yychar != YYEOF && yychar != YYEMPTY) + if (yychar != YYEMPTY) yydestruct ("Cleanup: discarding lookahead", yytoken, &yylval); /* Do not reclaim the symbols of the rule which action triggered diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index 9710b82466f..01ec550ec01 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -14,8 +14,6 @@ #define LKC_DIRECT_LINK #include "lkc.h" -#include "zconf.hash.c" - #define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt) #define PRINTD 0x0001 @@ -100,6 +98,11 @@ static struct menu *current_menu, *current_entry; menu_end_menu(); } if_entry menu_entry choice_entry +%{ +/* Include zconf.hash.c here so it can see the token constants. */ +#include "zconf.hash.c" +%} + %% input: stmt_list; -- GitLab From 237c80c5c8fb7ec128cf2a756b550dc41ad7eac7 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 15 Oct 2009 09:26:14 -0700 Subject: [PATCH 0069/1165] rcu: Fix TREE_PREEMPT_RCU CPU_HOTPLUG bad-luck hang If the following sequence of events occurs, then TREE_PREEMPT_RCU will hang waiting for a grace period to complete, eventually OOMing the system: o A TREE_PREEMPT_RCU build of the kernel is booted on a system with more than 64 physical CPUs present (32 on a 32-bit system). Alternatively, a TREE_PREEMPT_RCU build of the kernel is booted with RCU_FANOUT set to a sufficiently small value that the physical CPUs populate two or more leaf rcu_node structures. o A task is preempted in an RCU read-side critical section while running on a CPU corresponding to a given leaf rcu_node structure. o All CPUs corresponding to this same leaf rcu_node structure record quiescent states for the current grace period. o All of these same CPUs go offline (hence the need for enough physical CPUs to populate more than one leaf rcu_node structure). This causes the preempted task to be moved to the root rcu_node structure. At this point, there is nothing left to cause the quiescent state to be propagated up the rcu_node tree, so the current grace period never completes. The simplest fix, especially after considering the deadlock possibilities, is to detect this situation when the last CPU is offlined, and to set that CPU's ->qsmask bit in its leaf rcu_node structure. This will cause the next invocation of force_quiescent_state() to end the grace period. Without this fix, this hang can be triggered in an hour or so on some machines with rcutorture and random CPU onlining/offlining. With this fix, these same machines pass a full 10 hours of this sort of abuse. Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <20091015162614.GA19131@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar --- kernel/rcutree.c | 15 ++++++++++++++- kernel/rcutree.h | 6 +++--- kernel/rcutree_plugin.h | 25 +++++++++++++++++-------- 3 files changed, 34 insertions(+), 12 deletions(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index ddbf111e9e1..0536125b049 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -913,7 +913,20 @@ static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp) spin_unlock(&rnp->lock); /* irqs remain disabled. */ break; } - rcu_preempt_offline_tasks(rsp, rnp, rdp); + + /* + * If there was a task blocking the current grace period, + * and if all CPUs have checked in, we need to propagate + * the quiescent state up the rcu_node hierarchy. But that + * is inconvenient at the moment due to deadlock issues if + * this should end the current grace period. So set the + * offlined CPU's bit in ->qsmask in order to force the + * next force_quiescent_state() invocation to clean up this + * mess in a deadlock-free manner. + */ + if (rcu_preempt_offline_tasks(rsp, rnp, rdp) && !rnp->qsmask) + rnp->qsmask |= mask; + mask = rnp->grpmask; spin_unlock(&rnp->lock); /* irqs remain disabled. */ rnp = rnp->parent; diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 599161f309f..1823c6e2060 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -306,9 +306,9 @@ static void rcu_print_task_stall(struct rcu_node *rnp); #endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp); #ifdef CONFIG_HOTPLUG_CPU -static void rcu_preempt_offline_tasks(struct rcu_state *rsp, - struct rcu_node *rnp, - struct rcu_data *rdp); +static int rcu_preempt_offline_tasks(struct rcu_state *rsp, + struct rcu_node *rnp, + struct rcu_data *rdp); static void rcu_preempt_offline_cpu(int cpu); #endif /* #ifdef CONFIG_HOTPLUG_CPU */ static void rcu_preempt_check_callbacks(int cpu); diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index ebd20ee7707..ef2a58c2b9d 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -304,21 +304,25 @@ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp) * parent is to remove the need for rcu_read_unlock_special() to * make more than two attempts to acquire the target rcu_node's lock. * + * Returns 1 if there was previously a task blocking the current grace + * period on the specified rcu_node structure. + * * The caller must hold rnp->lock with irqs disabled. */ -static void rcu_preempt_offline_tasks(struct rcu_state *rsp, - struct rcu_node *rnp, - struct rcu_data *rdp) +static int rcu_preempt_offline_tasks(struct rcu_state *rsp, + struct rcu_node *rnp, + struct rcu_data *rdp) { int i; struct list_head *lp; struct list_head *lp_root; + int retval = rcu_preempted_readers(rnp); struct rcu_node *rnp_root = rcu_get_root(rsp); struct task_struct *tp; if (rnp == rnp_root) { WARN_ONCE(1, "Last CPU thought to be offlined?"); - return; /* Shouldn't happen: at least one CPU online. */ + return 0; /* Shouldn't happen: at least one CPU online. */ } WARN_ON_ONCE(rnp != rdp->mynode && (!list_empty(&rnp->blocked_tasks[0]) || @@ -342,6 +346,8 @@ static void rcu_preempt_offline_tasks(struct rcu_state *rsp, spin_unlock(&rnp_root->lock); /* irqs remain disabled */ } } + + return retval; } /* @@ -532,12 +538,15 @@ static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp) /* * Because preemptable RCU does not exist, it never needs to migrate - * tasks that were blocked within RCU read-side critical sections. + * tasks that were blocked within RCU read-side critical sections, and + * such non-existent tasks cannot possibly have been blocking the current + * grace period. */ -static void rcu_preempt_offline_tasks(struct rcu_state *rsp, - struct rcu_node *rnp, - struct rcu_data *rdp) +static int rcu_preempt_offline_tasks(struct rcu_state *rsp, + struct rcu_node *rnp, + struct rcu_data *rdp) { + return 0; } /* -- GitLab From b94b08081fcecf83fa690d6c5664f6316fe72208 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 14 Oct 2009 15:10:03 -0700 Subject: [PATCH 0070/1165] [IA64] fix percpu warnings Fix percpu types warning in ia64/sn: arch/ia64/sn/kernel/setup.c:74: error: conflicting types for '__pcpu_scope___sn_cnodeid_to_nasid' arch/ia64/include/asm/sn/arch.h:74: error: previous declaration of '__pcpu_scope___sn_cnodeid_to_nasid' was here Signed-off-by: Randy Dunlap Cc: Jes Sorensen Acked-by: Tejun Heo Signed-off-by: Tony Luck --- arch/ia64/include/asm/sn/arch.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/include/asm/sn/arch.h b/arch/ia64/include/asm/sn/arch.h index 7caa1f44cd9..f5f493b0c07 100644 --- a/arch/ia64/include/asm/sn/arch.h +++ b/arch/ia64/include/asm/sn/arch.h @@ -71,7 +71,7 @@ DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); * Compact node ID to nasid mappings kept in the per-cpu data areas of each * cpu. */ -DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); +DECLARE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid); #define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0])) -- GitLab From 0294cf4f7f895ddcf284b1ce7cf27a2c9d7106f7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 16:16:35 -0400 Subject: [PATCH 0071/1165] drm/radeon/kms: fix connector edid handling Based partly on a patch from Christian Koenig - fix several memory leaks in radeon_connector->edid handling - store edid in radeon_connector->edid in detect() or get_modes() - switch hdmi detect code to use radeon_connector->edid - add support for oem boards multiple connectors that share a ddc line. - short circuit lvds_detect() if have a stored edid Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 75 ++++++++++++++++++---- drivers/gpu/drm/radeon/radeon_display.c | 18 ++---- drivers/gpu/drm/radeon/radeon_encoders.c | 10 +-- drivers/gpu/drm/radeon/radeon_mode.h | 2 + 4 files changed, 73 insertions(+), 32 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 729207a1e83..5b6067aa08b 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -400,7 +400,6 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct drm_encoder *encoder = radeon_best_single_encoder(connector); enum drm_connector_status ret = connector_status_disconnected; - bool dret; if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -413,12 +412,17 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec } /* check for edid as well */ - if (radeon_connector->ddc_bus) { - radeon_i2c_do_lock(radeon_connector, 1); - dret = radeon_ddc_probe(radeon_connector); - radeon_i2c_do_lock(radeon_connector, 0); - if (dret) - ret = connector_status_connected; + if (radeon_connector->edid) + ret = connector_status_connected; + else { + if (radeon_connector->ddc_bus) { + radeon_i2c_do_lock(radeon_connector, 1); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, + &radeon_connector->ddc_bus->adapter); + radeon_i2c_do_lock(radeon_connector, 0); + if (radeon_connector->edid) + ret = connector_status_connected; + } } /* check acpi lid status ??? */ @@ -432,6 +436,8 @@ static void radeon_connector_destroy(struct drm_connector *connector) if (radeon_connector->ddc_bus) radeon_i2c_destroy(radeon_connector->ddc_bus); + if (radeon_connector->edid) + kfree(radeon_connector->edid); kfree(radeon_connector->con_priv); drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); @@ -519,9 +525,32 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connect radeon_i2c_do_lock(radeon_connector, 1); dret = radeon_ddc_probe(radeon_connector); radeon_i2c_do_lock(radeon_connector, 0); - if (dret) - ret = connector_status_connected; - else { + if (dret) { + if (radeon_connector->edid) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + } + radeon_i2c_do_lock(radeon_connector, 1); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); + radeon_i2c_do_lock(radeon_connector, 0); + + if (!radeon_connector->edid) { + DRM_ERROR("DDC responded but not EDID found for %s\n", + drm_get_connector_name(connector)); + } else { + radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); + + /* some oems have boards with separate digital and analog connectors + * with a shared ddc line (often vga + hdmi) + */ + if (radeon_connector->use_digital && radeon_connector->shared_ddc) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + ret = connector_status_disconnected; + } else + ret = connector_status_connected; + } + } else { if (radeon_connector->dac_load_detect) { encoder_funcs = encoder->helper_private; ret = encoder_funcs->detect(encoder, connector); @@ -649,6 +678,10 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect dret = radeon_ddc_probe(radeon_connector); radeon_i2c_do_lock(radeon_connector, 0); if (dret) { + if (radeon_connector->edid) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + } radeon_i2c_do_lock(radeon_connector, 1); radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); radeon_i2c_do_lock(radeon_connector, 0); @@ -659,10 +692,15 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); - /* if this isn't a digital monitor - then we need to make sure we don't have any - TV conflicts */ - ret = connector_status_connected; + /* some oems have boards with separate digital and analog connectors + * with a shared ddc line (often vga + hdmi) + */ + if ((!radeon_connector->use_digital) && radeon_connector->shared_ddc) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + ret = connector_status_disconnected; + } else + ret = connector_status_connected; } } @@ -787,6 +825,7 @@ radeon_add_atom_connector(struct drm_device *dev, struct radeon_connector *radeon_connector; struct radeon_connector_atom_dig *radeon_dig_connector; uint32_t subpixel_order = SubPixelNone; + bool shared_ddc = false; int ret; /* fixme - tv/cv/din */ @@ -800,6 +839,13 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->devices |= supported_device; return; } + if (radeon_connector->ddc_bus && i2c_bus->valid) { + if (memcmp(&radeon_connector->ddc_bus->rec, i2c_bus, + sizeof(struct radeon_i2c_bus_rec)) == 0) { + radeon_connector->shared_ddc = true; + shared_ddc = true; + } + } } radeon_connector = kzalloc(sizeof(struct radeon_connector), GFP_KERNEL); @@ -810,6 +856,7 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; + radeon_connector->shared_ddc = shared_ddc; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index a20bf43389b..c85df4afcb7 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -334,27 +334,19 @@ static bool radeon_setup_enc_conn(struct drm_device *dev) int radeon_ddc_get_modes(struct radeon_connector *radeon_connector) { - struct edid *edid; int ret = 0; if (!radeon_connector->ddc_bus) return -1; if (!radeon_connector->edid) { radeon_i2c_do_lock(radeon_connector, 1); - edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); radeon_i2c_do_lock(radeon_connector, 0); - } else - edid = radeon_connector->edid; + } - if (edid) { - /* update digital bits here */ - if (edid->input & DRM_EDID_INPUT_DIGITAL) - radeon_connector->use_digital = 1; - else - radeon_connector->use_digital = 0; - drm_mode_connector_update_edid_property(&radeon_connector->base, edid); - ret = drm_add_edid_modes(&radeon_connector->base, edid); - kfree(edid); + if (radeon_connector->edid) { + drm_mode_connector_update_edid_property(&radeon_connector->base, radeon_connector->edid); + ret = drm_add_edid_modes(&radeon_connector->base, radeon_connector->edid); return ret; } drm_mode_connector_update_edid_property(&radeon_connector->base, NULL); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 6cdef27be99..b70440e8d17 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -449,7 +449,7 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) case 1: args.v1.ucMisc = 0; args.v1.ucAction = action; - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { @@ -474,7 +474,7 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) if (dig->coherent_mode) args.v2.ucMisc |= PANEL_ENCODER_MISC_COHERENT; } - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) args.v2.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); args.v2.ucTruncate = 0; @@ -532,7 +532,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) switch (connector->connector_type) { case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */ - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else if (radeon_connector->use_digital) return ATOM_ENCODER_MODE_DVI; @@ -542,7 +542,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) case DRM_MODE_CONNECTOR_DVID: case DRM_MODE_CONNECTOR_HDMIA: default: - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; @@ -554,7 +554,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) /*if (radeon_output->MonType == MT_DP) return ATOM_ENCODER_MODE_DP; else*/ - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 3d2631be073..b6868fbe734 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -297,6 +297,8 @@ struct radeon_connector { uint32_t connector_id; uint32_t devices; struct radeon_i2c_chan *ddc_bus; + /* some systems have a an hdmi and vga port with a shared ddc line */ + bool shared_ddc; bool use_digital; /* we need to mind the EDID between detect and get modes due to analog/digital/tvencoder */ -- GitLab From ceefedd8e8a80b743fa0b6d6b1992be7029a9efb Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Oct 2009 23:57:47 -0400 Subject: [PATCH 0072/1165] drm/radeon/kms/atom: fix tv-out D1MODE_INTERLEAVE_EN was getting set in some cases in the encoder quirks function due to the changes in 5a9bcacc0a56f0d9577494e834519480018a6cc3 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ---- drivers/gpu/drm/radeon/radeon_encoders.c | 9 ++++++--- 2 files changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 3409aa3cbee..f7dcb691683 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -31,10 +31,6 @@ #include "atom.h" #include "atom-bits.h" -/* evil but including atombios.h is much worse */ -bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *crtc_timing, - int32_t *pixel_clock); static void atombios_overscan_setup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index b70440e8d17..2aa5994a29d 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -206,7 +206,7 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2))) adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2; - if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) { struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; if (tv_dac) { if (tv_dac->tv_std == TV_STD_NTSC || @@ -1085,8 +1085,11 @@ atombios_apply_encoder_quirks(struct drm_encoder *encoder, } /* set scaler clears this on some chips */ - if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE)) - WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, AVIVO_D1MODE_INTERLEAVE_EN); + if (!(radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))) { + if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE)) + WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, + AVIVO_D1MODE_INTERLEAVE_EN); + } } static void -- GitLab From dfdd646773941bb6b22c3898a26a109e57c872a2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Oct 2009 12:48:44 -0400 Subject: [PATCH 0073/1165] drm/radeon/kms: limit default tv modes to <= 1024x768 fixes fdo bug 24496 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 5b6067aa08b..ce3a785a633 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -223,6 +223,11 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn }; for (i = 0; i < 17; i++) { + if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) { + if (common_modes[i].w > 1024 || + common_modes[i].h > 768) + continue; + } if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { if (common_modes[i].w > native_mode->hdisplay || common_modes[i].h > native_mode->vdisplay || -- GitLab From a77f171843d466d4af0d527bcb2d314fafa8afd7 Mon Sep 17 00:00:00 2001 From: Matt Turner Date: Wed, 14 Oct 2009 00:34:41 -0400 Subject: [PATCH 0074/1165] drm/radeon/kms: use RADEON_GPU_PAGE_SIZE instead of 4096 Signed-off-by: Matt Turner Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 +- drivers/gpu/drm/radeon/r300.c | 2 +- drivers/gpu/drm/radeon/r600.c | 10 +++++----- drivers/gpu/drm/radeon/radeon.h | 2 ++ drivers/gpu/drm/radeon/radeon_benchmark.c | 4 ++-- drivers/gpu/drm/radeon/radeon_gart.c | 20 ++++++++++---------- drivers/gpu/drm/radeon/radeon_test.c | 6 +++--- 7 files changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 33198dd5706..c22adff179a 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -240,7 +240,7 @@ int r100_wb_init(struct radeon_device *rdev) int r; if (rdev->wb.wb_obj == NULL) { - r = radeon_object_create(rdev, NULL, 4096, + r = radeon_object_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index e08c4a8974c..2f43ee8e404 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -113,7 +113,7 @@ int rv370_pcie_gart_enable(struct radeon_device *rdev) tmp = RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD; WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp); WREG32_PCIE(RADEON_PCIE_TX_GART_START_LO, rdev->mc.gtt_location); - tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 4096; + tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - RADEON_GPU_PAGE_SIZE; WREG32_PCIE(RADEON_PCIE_TX_GART_END_LO, tmp); WREG32_PCIE(RADEON_PCIE_TX_GART_START_HI, 0); WREG32_PCIE(RADEON_PCIE_TX_GART_END_HI, 0); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 6b43a95a5fb..1b5aa1fd368 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1269,9 +1269,9 @@ int r600_cp_resume(struct radeon_device *rdev) rb_bufsz = drm_order(rdev->cp.ring_size / 8); #ifdef __BIG_ENDIAN WREG32(CP_RB_CNTL, BUF_SWAP_32BIT | RB_NO_UPDATE | - (drm_order(4096/8) << 8) | rb_bufsz); + (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); #else - WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(4096/8) << 8) | rb_bufsz); + WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); #endif WREG32(CP_SEM_WAIT_TIMER, 0x4); @@ -1400,7 +1400,7 @@ int r600_wb_enable(struct radeon_device *rdev) int r; if (rdev->wb.wb_obj == NULL) { - r = radeon_object_create(rdev, NULL, 4096, true, + r = radeon_object_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj); if (r) { dev_warn(rdev->dev, "failed to create WB buffer (%d).\n", r); @@ -1450,8 +1450,8 @@ int r600_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence) { - r600_blit_prepare_copy(rdev, num_pages * 4096); - r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * 4096); + r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE); r600_blit_done_copy(rdev, fence); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 3598adca034..8b60e36b20b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -276,6 +276,8 @@ union radeon_gart_table { struct radeon_gart_table_vram vram; }; +#define RADEON_GPU_PAGE_SIZE 4096 + struct radeon_gart { dma_addr_t table_addr; unsigned num_gpu_pages; diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c index 2e938f7496f..10bd50a7db8 100644 --- a/drivers/gpu/drm/radeon/radeon_benchmark.c +++ b/drivers/gpu/drm/radeon/radeon_benchmark.c @@ -63,7 +63,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence); + r = radeon_copy_dma(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { goto out_cleanup; } @@ -88,7 +88,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence); + r = radeon_copy_blit(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { goto out_cleanup; } diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index a931af065dd..a68d7566178 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -140,15 +140,15 @@ void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset, WARN(1, "trying to unbind memory to unitialized GART !\n"); return; } - t = offset / 4096; - p = t / (PAGE_SIZE / 4096); + t = offset / RADEON_GPU_PAGE_SIZE; + p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); for (i = 0; i < pages; i++, p++) { if (rdev->gart.pages[p]) { pci_unmap_page(rdev->pdev, rdev->gart.pages_addr[p], PAGE_SIZE, PCI_DMA_BIDIRECTIONAL); rdev->gart.pages[p] = NULL; rdev->gart.pages_addr[p] = 0; - for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) { + for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { radeon_gart_set_page(rdev, t, 0); } } @@ -169,8 +169,8 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, DRM_ERROR("trying to bind memory to unitialized GART !\n"); return -EINVAL; } - t = offset / 4096; - p = t / (PAGE_SIZE / 4096); + t = offset / RADEON_GPU_PAGE_SIZE; + p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); for (i = 0; i < pages; i++, p++) { /* we need to support large memory configurations */ @@ -185,9 +185,9 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, } rdev->gart.pages[p] = pagelist[i]; page_base = rdev->gart.pages_addr[p]; - for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) { + for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { radeon_gart_set_page(rdev, t, page_base); - page_base += 4096; + page_base += RADEON_GPU_PAGE_SIZE; } } mb(); @@ -200,14 +200,14 @@ int radeon_gart_init(struct radeon_device *rdev) if (rdev->gart.pages) { return 0; } - /* We need PAGE_SIZE >= 4096 */ - if (PAGE_SIZE < 4096) { + /* We need PAGE_SIZE >= RADEON_GPU_PAGE_SIZE */ + if (PAGE_SIZE < RADEON_GPU_PAGE_SIZE) { DRM_ERROR("Page size is smaller than GPU page size!\n"); return -EINVAL; } /* Compute table size */ rdev->gart.num_cpu_pages = rdev->mc.gtt_size / PAGE_SIZE; - rdev->gart.num_gpu_pages = rdev->mc.gtt_size / 4096; + rdev->gart.num_gpu_pages = rdev->mc.gtt_size / RADEON_GPU_PAGE_SIZE; DRM_INFO("GART: num cpu pages %u, num gpu pages %u\n", rdev->gart.num_cpu_pages, rdev->gart.num_gpu_pages); /* Allocate pages table */ diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index 03c33cf4e14..f8a465d9a1c 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -42,7 +42,7 @@ void radeon_test_moves(struct radeon_device *rdev) /* Number of tests = * (Total GTT - IB pool - writeback page - ring buffer) / test size */ - n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 - + n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - rdev->cp.ring_size) / size; gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL); @@ -102,7 +102,7 @@ void radeon_test_moves(struct radeon_device *rdev) goto out_cleanup; } - r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence); + r = radeon_copy(rdev, gtt_addr, vram_addr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { DRM_ERROR("Failed GTT->VRAM copy %d\n", i); goto out_cleanup; @@ -145,7 +145,7 @@ void radeon_test_moves(struct radeon_device *rdev) goto out_cleanup; } - r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence); + r = radeon_copy(rdev, vram_addr, gtt_addr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { DRM_ERROR("Failed VRAM->GTT copy %d\n", i); goto out_cleanup; -- GitLab From f059d2ad69b056aeabad4460f706a3df2f77ce50 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 14 Oct 2009 09:11:25 +0800 Subject: [PATCH 0075/1165] drm: Add the basic check for the detailed timing in EDID Sometimes we will get the incorrect display modeline when parsing the detailed timing in EDID. For example: >hsync/vsync width is zero >sync is beyond the blank. So add the basic check for the detailed timing in EDID to avoid the incorrect display modeline. Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 3c0d2b3aed7..cea665d86dd 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -626,6 +626,12 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, return NULL; } + /* it is incorrect if hsync/vsync width is zero */ + if (!hsync_pulse_width || !vsync_pulse_width) { + DRM_DEBUG_KMS("Incorrect Detailed timing. " + "Wrong Hsync/Vsync pulse width\n"); + return NULL; + } mode = drm_mode_create(dev); if (!mode) return NULL; @@ -647,6 +653,15 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->vsync_end = mode->vsync_start + vsync_pulse_width; mode->vtotal = mode->vdisplay + vblank; + /* perform the basic check for the detailed timing */ + if (mode->hsync_end > mode->htotal || + mode->vsync_end > mode->vtotal) { + drm_mode_destroy(dev, mode); + DRM_DEBUG_KMS("Incorrect detailed timing. " + "Sync is beyond the blank.\n"); + return NULL; + } + drm_mode_set_name(mode); if (pt->misc & DRM_EDID_PT_INTERLACED) -- GitLab From 1442577bf6da1a31ae6555212202be9a2cec5642 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 15:55:25 +1100 Subject: [PATCH 0076/1165] Revert "md: do not progress the resync process if the stripe was blocked" This reverts commit df10cfbc4d7ab93260d997df754219d390d62a9d. This patch was based on a misunderstanding and risks introducing a busy-wait loop. So revert it. Acked-by: Dan Williams Signed-off-by: NeilBrown --- drivers/md/raid5.c | 19 ++++++------------- 1 file changed, 6 insertions(+), 13 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 94829804ab7..ec14ff5b508 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2896,7 +2896,7 @@ static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, * */ -static bool handle_stripe5(struct stripe_head *sh) +static void handle_stripe5(struct stripe_head *sh) { raid5_conf_t *conf = sh->raid_conf; int disks = sh->disks, i; @@ -3167,11 +3167,9 @@ static bool handle_stripe5(struct stripe_head *sh) ops_run_io(sh, &s); return_io(return_bi); - - return blocked_rdev == NULL; } -static bool handle_stripe6(struct stripe_head *sh) +static void handle_stripe6(struct stripe_head *sh) { raid5_conf_t *conf = sh->raid_conf; int disks = sh->disks; @@ -3455,17 +3453,14 @@ static bool handle_stripe6(struct stripe_head *sh) ops_run_io(sh, &s); return_io(return_bi); - - return blocked_rdev == NULL; } -/* returns true if the stripe was handled */ -static bool handle_stripe(struct stripe_head *sh) +static void handle_stripe(struct stripe_head *sh) { if (sh->raid_conf->level == 6) - return handle_stripe6(sh); + handle_stripe6(sh); else - return handle_stripe5(sh); + handle_stripe5(sh); } static void raid5_activate_delayed(raid5_conf_t *conf) @@ -4277,9 +4272,7 @@ static inline sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *ski clear_bit(STRIPE_INSYNC, &sh->state); spin_unlock(&sh->lock); - /* wait for any blocked device to be handled */ - while (unlikely(!handle_stripe(sh))) - ; + handle_stripe(sh); release_stripe(sh); return STRIPE_SECTORS; -- GitLab From 1d9d52416c0445019ccc1f0fddb9a227456eb61b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 15:55:32 +1100 Subject: [PATCH 0077/1165] md/raid1/raid10: add a cond_resched During 'check' of a raid1 or raid10 it is possible for the management thread to spend a lot of time running 'memcmp' on blocks from different devices, so make sure the thread has a chance to schedule. raid5d already has a cond_resched (in process_stripe). Reported-By: Lee Howard Signed-off-by: NeilBrown --- drivers/md/raid1.c | 1 + drivers/md/raid10.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index d1b9bd5fd4f..71a01a2e193 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1683,6 +1683,7 @@ static void raid1d(mddev_t *mddev) generic_make_request(bio); } } + cond_resched(); } if (unplug) unplug_slaves(mddev); diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 51c4c5c4d87..69fc76caa46 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1632,6 +1632,7 @@ static void raid10d(mddev_t *mddev) generic_make_request(bio); } } + cond_resched(); } if (unplug) unplug_slaves(mddev); -- GitLab From f5efd45ae597c96ed017afad5662b67d55b402a0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 16 Oct 2009 15:55:38 +1100 Subject: [PATCH 0078/1165] md/raid5: initialize conf->device_lock earlier Deallocating a raid5_conf_t structure requires taking 'device_lock'. Ensure it is initialized before it is used, i.e. initialize the lock before attempting any further initializations that might fail. Signed-off-by: Dan Williams Signed-off-by: NeilBrown --- drivers/md/raid5.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index ec14ff5b508..c3e59677861 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4715,6 +4715,18 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) conf = kzalloc(sizeof(raid5_conf_t), GFP_KERNEL); if (conf == NULL) goto abort; + spin_lock_init(&conf->device_lock); + init_waitqueue_head(&conf->wait_for_stripe); + init_waitqueue_head(&conf->wait_for_overlap); + INIT_LIST_HEAD(&conf->handle_list); + INIT_LIST_HEAD(&conf->hold_list); + INIT_LIST_HEAD(&conf->delayed_list); + INIT_LIST_HEAD(&conf->bitmap_list); + INIT_LIST_HEAD(&conf->inactive_list); + atomic_set(&conf->active_stripes, 0); + atomic_set(&conf->preread_active_stripes, 0); + atomic_set(&conf->active_aligned_reads, 0); + conf->bypass_threshold = BYPASS_THRESHOLD; conf->raid_disks = mddev->raid_disks; conf->scribble_len = scribble_len(conf->raid_disks); @@ -4737,19 +4749,6 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) if (raid5_alloc_percpu(conf) != 0) goto abort; - spin_lock_init(&conf->device_lock); - init_waitqueue_head(&conf->wait_for_stripe); - init_waitqueue_head(&conf->wait_for_overlap); - INIT_LIST_HEAD(&conf->handle_list); - INIT_LIST_HEAD(&conf->hold_list); - INIT_LIST_HEAD(&conf->delayed_list); - INIT_LIST_HEAD(&conf->bitmap_list); - INIT_LIST_HEAD(&conf->inactive_list); - atomic_set(&conf->active_stripes, 0); - atomic_set(&conf->preread_active_stripes, 0); - atomic_set(&conf->active_aligned_reads, 0); - conf->bypass_threshold = BYPASS_THRESHOLD; - pr_debug("raid5: run(%s) called.\n", mdname(mddev)); list_for_each_entry(rdev, &mddev->disks, same_set) { -- GitLab From ed9bfdf1a40952fd0f8094ec77f876b84ead69af Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 15:55:44 +1100 Subject: [PATCH 0079/1165] md: raid1/raid10: handle allocation errors during array setup. Both raid1 and raid10 create a mempool during startup. If the 'alloc' function for this mempool fails, unplug_slaves is called. If that happens when the pool is being initialised, unplug_slaves will try to use the 'conf' structure that isn't filled in yet, and badness will happen. So ensure that unplug_slaves doesn't get called unless we know that the conf structure if fully initialised. Signed-off-by: NeilBrown --- drivers/md/raid1.c | 5 +++-- drivers/md/raid10.c | 4 ++-- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 71a01a2e193..a053423785c 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -64,7 +64,7 @@ static void * r1bio_pool_alloc(gfp_t gfp_flags, void *data) /* allocate a r1bio with room for raid_disks entries in the bios array */ r1_bio = kzalloc(size, gfp_flags); - if (!r1_bio) + if (!r1_bio && pi->mddev) unplug_slaves(pi->mddev); return r1_bio; @@ -1979,13 +1979,14 @@ static int run(mddev_t *mddev) conf->poolinfo = kmalloc(sizeof(*conf->poolinfo), GFP_KERNEL); if (!conf->poolinfo) goto out_no_mem; - conf->poolinfo->mddev = mddev; + conf->poolinfo->mddev = NULL; conf->poolinfo->raid_disks = mddev->raid_disks; conf->r1bio_pool = mempool_create(NR_RAID1_BIOS, r1bio_pool_alloc, r1bio_pool_free, conf->poolinfo); if (!conf->r1bio_pool) goto out_no_mem; + conf->poolinfo->mddev = mddev; spin_lock_init(&conf->device_lock); mddev->queue->queue_lock = &conf->device_lock; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 69fc76caa46..c2cb7b87b44 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -68,7 +68,7 @@ static void * r10bio_pool_alloc(gfp_t gfp_flags, void *data) /* allocate a r10bio with room for raid_disks entries in the bios array */ r10_bio = kzalloc(size, gfp_flags); - if (!r10_bio) + if (!r10_bio && conf->mddev) unplug_slaves(conf->mddev); return r10_bio; @@ -2096,7 +2096,6 @@ static int run(mddev_t *mddev) if (!conf->tmppage) goto out_free_conf; - conf->mddev = mddev; conf->raid_disks = mddev->raid_disks; conf->near_copies = nc; conf->far_copies = fc; @@ -2133,6 +2132,7 @@ static int run(mddev_t *mddev) goto out_free_conf; } + conf->mddev = mddev; spin_lock_init(&conf->device_lock); mddev->queue->queue_lock = &conf->device_lock; -- GitLab From ae8fa2831bbc5092ee9d1b90e623af881cf27140 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 15:56:01 +1100 Subject: [PATCH 0080/1165] md: remove clumsy usage of do_sync_mapping_range from bitmap code and replace with vfs_fsync which is much neater (but wasn't exported, or even in existence at the time the code was written). Cc: Christoph Hellwig Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 6986b0059d2..60e2b322db1 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1624,10 +1624,11 @@ int bitmap_create(mddev_t *mddev) bitmap->offset = mddev->bitmap_offset; if (file) { get_file(file); - do_sync_mapping_range(file->f_mapping, 0, LLONG_MAX, - SYNC_FILE_RANGE_WAIT_BEFORE | - SYNC_FILE_RANGE_WRITE | - SYNC_FILE_RANGE_WAIT_AFTER); + /* As future accesses to this file will use bmap, + * and bypass the page cache, we must sync the file + * first. + */ + vfs_fsync(file, file->f_dentry, 1); } /* read superblock from bitmap file (this sets bitmap->chunksize) */ err = bitmap_read_sb(bitmap); -- GitLab From a5912f6b3e20c137172460e6d4dd180866c00963 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 16 Oct 2009 07:18:46 +0200 Subject: [PATCH 0081/1165] x86: Document linker script ASSERT() quirk Older binutils breaks if ASSERT() is used without a sink for the output. For example 2.14.90.0.6 is known to be broken, the link fails with: LD .tmp_vmlinux1 ld:arch/x86/kernel/vmlinux.lds:678: parse error Document this quirk in all three files that use it. See: http://marc.info/?l=linux-kbuild&m=124930110427870&w=2 See[2]: d2ba8b2 ("x86: Fix assert syntax in vmlinux.lds.S") Cc: Linus Torvalds Cc: Roland McGrath Cc: "H. Peter Anvin" Cc: Sam Ravnborg LKML-Reference: <4AD6523D.5030909@zytor.com> Signed-off-by: Ingo Molnar --- arch/x86/boot/setup.ld | 3 +++ arch/x86/kernel/acpi/realmode/wakeup.lds.S | 3 +++ arch/x86/kernel/vmlinux.lds.S | 3 +++ 3 files changed, 9 insertions(+) diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld index 0f6ec455a2b..03c0683636b 100644 --- a/arch/x86/boot/setup.ld +++ b/arch/x86/boot/setup.ld @@ -53,6 +53,9 @@ SECTIONS /DISCARD/ : { *(.note*) } + /* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ . = ASSERT(_end <= 0x8000, "Setup too big!"); . = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!"); /* Necessary for the very-old-loader check to work... */ diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S index 7da00b799cd..060fff8f5c5 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S @@ -57,5 +57,8 @@ SECTIONS *(.note*) } + /* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!"); } diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 92929fb3f9f..3c68fe2d46c 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -305,6 +305,9 @@ SECTIONS #ifdef CONFIG_X86_32 +/* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ . = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE), "kernel image bigger than KERNEL_IMAGE_SIZE"); #else -- GitLab From dce3a7a42d585b74ce68081010b42afe81c8f4c4 Mon Sep 17 00:00:00 2001 From: Vladimir Dronnikov Date: Fri, 16 Oct 2009 16:25:19 +1100 Subject: [PATCH 0082/1165] md: drivers/md/unroll.pl replaced with awk analog drivers/md/unroll.pl replaced by awk script to drop build-time dependency on perl Signed-off-by: Vladimir Dronnikov Signed-off-by: NeilBrown --- drivers/md/Makefile | 22 +++++++++--------- drivers/md/raid6altivec.uc | 2 +- drivers/md/raid6int.uc | 2 +- drivers/md/raid6test/Makefile | 42 +++++++++++++++++------------------ drivers/md/unroll.awk | 20 +++++++++++++++++ drivers/md/unroll.pl | 24 -------------------- 6 files changed, 54 insertions(+), 58 deletions(-) create mode 100644 drivers/md/unroll.awk delete mode 100644 drivers/md/unroll.pl diff --git a/drivers/md/Makefile b/drivers/md/Makefile index 1dc4185bd78..e355e7f6a53 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -46,7 +46,7 @@ obj-$(CONFIG_DM_LOG_USERSPACE) += dm-log-userspace.o obj-$(CONFIG_DM_ZERO) += dm-zero.o quiet_cmd_unroll = UNROLL $@ - cmd_unroll = $(PERL) $(srctree)/$(src)/unroll.pl $(UNROLL) \ + cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \ < $< > $@ || ( rm -f $@ && exit 1 ) ifeq ($(CONFIG_ALTIVEC),y) @@ -59,56 +59,56 @@ endif targets += raid6int1.c $(obj)/raid6int1.c: UNROLL := 1 -$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) targets += raid6int2.c $(obj)/raid6int2.c: UNROLL := 2 -$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) targets += raid6int4.c $(obj)/raid6int4.c: UNROLL := 4 -$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) targets += raid6int8.c $(obj)/raid6int8.c: UNROLL := 8 -$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) targets += raid6int16.c $(obj)/raid6int16.c: UNROLL := 16 -$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) targets += raid6int32.c $(obj)/raid6int32.c: UNROLL := 32 -$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE +$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) CFLAGS_raid6altivec1.o += $(altivec_flags) targets += raid6altivec1.c $(obj)/raid6altivec1.c: UNROLL := 1 -$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE +$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) CFLAGS_raid6altivec2.o += $(altivec_flags) targets += raid6altivec2.c $(obj)/raid6altivec2.c: UNROLL := 2 -$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE +$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) CFLAGS_raid6altivec4.o += $(altivec_flags) targets += raid6altivec4.c $(obj)/raid6altivec4.c: UNROLL := 4 -$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE +$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) CFLAGS_raid6altivec8.o += $(altivec_flags) targets += raid6altivec8.c $(obj)/raid6altivec8.c: UNROLL := 8 -$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE +$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE $(call if_changed,unroll) quiet_cmd_mktable = TABLE $@ diff --git a/drivers/md/raid6altivec.uc b/drivers/md/raid6altivec.uc index 699dfeee494..2654d5c854b 100644 --- a/drivers/md/raid6altivec.uc +++ b/drivers/md/raid6altivec.uc @@ -15,7 +15,7 @@ * * $#-way unrolled portable integer math RAID-6 instruction set * - * This file is postprocessed using unroll.pl + * This file is postprocessed using unroll.awk * * hpa: in process, * you can just "steal" the vec unit with enable_kernel_altivec() (but diff --git a/drivers/md/raid6int.uc b/drivers/md/raid6int.uc index f9bf9cba357..d1e276a14fa 100644 --- a/drivers/md/raid6int.uc +++ b/drivers/md/raid6int.uc @@ -15,7 +15,7 @@ * * $#-way unrolled portable integer math RAID-6 instruction set * - * This file is postprocessed using unroll.pl + * This file is postprocessed using unroll.awk */ #include diff --git a/drivers/md/raid6test/Makefile b/drivers/md/raid6test/Makefile index 58ffdf4f516..2874cbef529 100644 --- a/drivers/md/raid6test/Makefile +++ b/drivers/md/raid6test/Makefile @@ -7,7 +7,7 @@ CC = gcc OPTFLAGS = -O2 # Adjust as desired CFLAGS = -I.. -I ../../../include -g $(OPTFLAGS) LD = ld -PERL = perl +AWK = awk AR = ar RANLIB = ranlib @@ -35,35 +35,35 @@ raid6.a: raid6int1.o raid6int2.o raid6int4.o raid6int8.o raid6int16.o \ raid6test: test.c raid6.a $(CC) $(CFLAGS) -o raid6test $^ -raid6altivec1.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 1 < raid6altivec.uc > $@ +raid6altivec1.c: raid6altivec.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=1 < raid6altivec.uc > $@ -raid6altivec2.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 2 < raid6altivec.uc > $@ +raid6altivec2.c: raid6altivec.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=2 < raid6altivec.uc > $@ -raid6altivec4.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 4 < raid6altivec.uc > $@ +raid6altivec4.c: raid6altivec.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=4 < raid6altivec.uc > $@ -raid6altivec8.c: raid6altivec.uc ../unroll.pl - $(PERL) ../unroll.pl 8 < raid6altivec.uc > $@ +raid6altivec8.c: raid6altivec.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=8 < raid6altivec.uc > $@ -raid6int1.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 1 < raid6int.uc > $@ +raid6int1.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=1 < raid6int.uc > $@ -raid6int2.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 2 < raid6int.uc > $@ +raid6int2.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=2 < raid6int.uc > $@ -raid6int4.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 4 < raid6int.uc > $@ +raid6int4.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=4 < raid6int.uc > $@ -raid6int8.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 8 < raid6int.uc > $@ +raid6int8.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=8 < raid6int.uc > $@ -raid6int16.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 16 < raid6int.uc > $@ +raid6int16.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=16 < raid6int.uc > $@ -raid6int32.c: raid6int.uc ../unroll.pl - $(PERL) ../unroll.pl 32 < raid6int.uc > $@ +raid6int32.c: raid6int.uc ../unroll.awk + $(AWK) ../unroll.awk -vN=32 < raid6int.uc > $@ raid6tables.c: mktables ./mktables > raid6tables.c diff --git a/drivers/md/unroll.awk b/drivers/md/unroll.awk new file mode 100644 index 00000000000..c6aa03631df --- /dev/null +++ b/drivers/md/unroll.awk @@ -0,0 +1,20 @@ + +# This filter requires one command line option of form -vN=n +# where n must be a decimal number. +# +# Repeat each input line containing $$ n times, replacing $$ with 0...n-1. +# Replace each $# with n, and each $* with a single $. + +BEGIN { + n = N + 0 +} +{ + if (/\$\$/) { rep = n } else { rep = 1 } + for (i = 0; i < rep; ++i) { + tmp = $0 + gsub(/\$\$/, i, tmp) + gsub(/\$\#/, n, tmp) + gsub(/\$\*/, "$", tmp) + print tmp + } +} diff --git a/drivers/md/unroll.pl b/drivers/md/unroll.pl deleted file mode 100644 index 3acc710a20e..00000000000 --- a/drivers/md/unroll.pl +++ /dev/null @@ -1,24 +0,0 @@ -#!/usr/bin/perl -# -# Take a piece of C code and for each line which contains the sequence $$ -# repeat n times with $ replaced by 0...n-1; the sequence $# is replaced -# by the unrolling factor, and $* with a single $ -# - -($n) = @ARGV; -$n += 0; - -while ( defined($line = ) ) { - if ( $line =~ /\$\$/ ) { - $rep = $n; - } else { - $rep = 1; - } - for ( $i = 0 ; $i < $rep ; $i++ ) { - $tmp = $line; - $tmp =~ s/\$\$/$i/g; - $tmp =~ s/\$\#/$n/g; - $tmp =~ s/\$\*/\$/g; - print $tmp; - } -} -- GitLab From 417b8d4ac868cf58d6c68f52d72f7648413e0edc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 16 Oct 2009 16:25:22 +1100 Subject: [PATCH 0083/1165] md/raid456: downlevel multicore operations to raid_run_ops The percpu conversion allowed a straightforward handoff of stripe processing to the async subsytem that initially showed some modest gains (+4%). However, this model is too simplistic and leads to stripes bouncing between raid5d and the async thread pool for every invocation of handle_stripe(). As reported by Holger this can fall into a pathological situation severely impacting throughput (6x performance loss). By downleveling the parallelism to raid_run_ops the pathological stripe_head bouncing is eliminated. This version still exhibits an average 11% throughput loss for: mdadm --create /dev/md0 /dev/sd[b-q] -n 16 -l 6 echo 1024 > /sys/block/md0/md/stripe_cache_size dd if=/dev/zero of=/dev/md0 bs=1024k count=2048 ...but the results are at least stable and can be used as a base for further multicore experimentation. Reported-by: Holger Kiehl Signed-off-by: Dan Williams Signed-off-by: NeilBrown --- drivers/md/raid5.c | 75 ++++++++++++++++++++++++---------------------- drivers/md/raid5.h | 12 +++++++- 2 files changed, 51 insertions(+), 36 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c3e59677861..25c3c29134d 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1139,7 +1139,7 @@ static void ops_run_check_pq(struct stripe_head *sh, struct raid5_percpu *percpu &sh->ops.zero_sum_result, percpu->spare_page, &submit); } -static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) +static void __raid_run_ops(struct stripe_head *sh, unsigned long ops_request) { int overlap_clear = 0, i, disks = sh->disks; struct dma_async_tx_descriptor *tx = NULL; @@ -1204,6 +1204,36 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) put_cpu(); } +#ifdef CONFIG_MULTICORE_RAID456 +static void async_run_ops(void *param, async_cookie_t cookie) +{ + struct stripe_head *sh = param; + unsigned long ops_request = sh->ops.request; + + clear_bit_unlock(STRIPE_OPS_REQ_PENDING, &sh->state); + wake_up(&sh->ops.wait_for_ops); + + __raid_run_ops(sh, ops_request); + release_stripe(sh); +} + +static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) +{ + /* since handle_stripe can be called outside of raid5d context + * we need to ensure sh->ops.request is de-staged before another + * request arrives + */ + wait_event(sh->ops.wait_for_ops, + !test_and_set_bit_lock(STRIPE_OPS_REQ_PENDING, &sh->state)); + sh->ops.request = ops_request; + + atomic_inc(&sh->count); + async_schedule(async_run_ops, sh); +} +#else +#define raid_run_ops __raid_run_ops +#endif + static int grow_one_stripe(raid5_conf_t *conf) { struct stripe_head *sh; @@ -1213,6 +1243,9 @@ static int grow_one_stripe(raid5_conf_t *conf) memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev)); sh->raid_conf = conf; spin_lock_init(&sh->lock); + #ifdef CONFIG_MULTICORE_RAID456 + init_waitqueue_head(&sh->ops.wait_for_ops); + #endif if (grow_buffers(sh, conf->raid_disks)) { shrink_buffers(sh, conf->raid_disks); @@ -1329,6 +1362,9 @@ static int resize_stripes(raid5_conf_t *conf, int newsize) nsh->raid_conf = conf; spin_lock_init(&nsh->lock); + #ifdef CONFIG_MULTICORE_RAID456 + init_waitqueue_head(&nsh->ops.wait_for_ops); + #endif list_add(&nsh->lru, &newstripes); } @@ -4342,37 +4378,6 @@ static int retry_aligned_read(raid5_conf_t *conf, struct bio *raid_bio) return handled; } -#ifdef CONFIG_MULTICORE_RAID456 -static void __process_stripe(void *param, async_cookie_t cookie) -{ - struct stripe_head *sh = param; - - handle_stripe(sh); - release_stripe(sh); -} - -static void process_stripe(struct stripe_head *sh, struct list_head *domain) -{ - async_schedule_domain(__process_stripe, sh, domain); -} - -static void synchronize_stripe_processing(struct list_head *domain) -{ - async_synchronize_full_domain(domain); -} -#else -static void process_stripe(struct stripe_head *sh, struct list_head *domain) -{ - handle_stripe(sh); - release_stripe(sh); - cond_resched(); -} - -static void synchronize_stripe_processing(struct list_head *domain) -{ -} -#endif - /* * This is our raid5 kernel thread. @@ -4386,7 +4391,6 @@ static void raid5d(mddev_t *mddev) struct stripe_head *sh; raid5_conf_t *conf = mddev->private; int handled; - LIST_HEAD(raid_domain); pr_debug("+++ raid5d active\n"); @@ -4423,7 +4427,9 @@ static void raid5d(mddev_t *mddev) spin_unlock_irq(&conf->device_lock); handled++; - process_stripe(sh, &raid_domain); + handle_stripe(sh); + release_stripe(sh); + cond_resched(); spin_lock_irq(&conf->device_lock); } @@ -4431,7 +4437,6 @@ static void raid5d(mddev_t *mddev) spin_unlock_irq(&conf->device_lock); - synchronize_stripe_processing(&raid_domain); async_tx_issue_pending_all(); unplug_slaves(mddev); diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index 2390e0e83da..dcefdc9629e 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -214,12 +214,20 @@ struct stripe_head { int disks; /* disks in stripe */ enum check_states check_state; enum reconstruct_states reconstruct_state; - /* stripe_operations + /** + * struct stripe_operations * @target - STRIPE_OP_COMPUTE_BLK target + * @target2 - 2nd compute target in the raid6 case + * @zero_sum_result - P and Q verification flags + * @request - async service request flags for raid_run_ops */ struct stripe_operations { int target, target2; enum sum_check_flags zero_sum_result; + #ifdef CONFIG_MULTICORE_RAID456 + unsigned long request; + wait_queue_head_t wait_for_ops; + #endif } ops; struct r5dev { struct bio req; @@ -294,6 +302,8 @@ struct r6_state { #define STRIPE_FULL_WRITE 13 /* all blocks are set to be overwritten */ #define STRIPE_BIOFILL_RUN 14 #define STRIPE_COMPUTE_RUN 15 +#define STRIPE_OPS_REQ_PENDING 16 + /* * Operation request flags */ -- GitLab From e4424fee1815f996dccd36be44d68ca160ec3e1b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 16:27:34 +1100 Subject: [PATCH 0084/1165] md: fix problems with RAID6 calculations for DDF. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 20 +++++++++++++------- drivers/md/raid5.h | 2 +- 2 files changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 25c3c29134d..d4ce51b4d41 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -158,11 +158,14 @@ static int raid6_idx_to_slot(int idx, struct stripe_head *sh, { int slot; + if (sh->ddf_layout) + slot = (*count)++; if (idx == sh->pd_idx) return syndrome_disks; if (idx == sh->qd_idx) return syndrome_disks + 1; - slot = (*count)++; + if (!sh->ddf_layout) + slot = (*count)++; return slot; } @@ -727,9 +730,8 @@ static int set_syndrome_sources(struct page **srcs, struct stripe_head *sh) srcs[slot] = sh->dev[i].page; i = raid6_next_disk(i, disks); } while (i != d0_idx); - BUG_ON(count != syndrome_disks); - return count; + return syndrome_disks; } static struct dma_async_tx_descriptor * @@ -828,7 +830,6 @@ ops_run_compute6_2(struct stripe_head *sh, struct raid5_percpu *percpu) failb = slot; i = raid6_next_disk(i, disks); } while (i != d0_idx); - BUG_ON(count != syndrome_disks); BUG_ON(faila == failb); if (failb < faila) @@ -845,7 +846,7 @@ ops_run_compute6_2(struct stripe_head *sh, struct raid5_percpu *percpu) init_async_submit(&submit, ASYNC_TX_FENCE, NULL, ops_complete_compute, sh, to_addr_conv(sh, percpu)); - return async_gen_syndrome(blocks, 0, count+2, + return async_gen_syndrome(blocks, 0, syndrome_disks+2, STRIPE_SIZE, &submit); } else { struct page *dest; @@ -1935,10 +1936,15 @@ static sector_t compute_blocknr(struct stripe_head *sh, int i, int previous) case ALGORITHM_PARITY_N: break; case ALGORITHM_ROTATING_N_CONTINUE: + /* Like left_symmetric, but P is before Q */ if (sh->pd_idx == 0) i--; /* P D D D Q */ - else if (i > sh->pd_idx) - i -= 2; /* D D Q P D */ + else { + /* D D Q P D */ + if (i < sh->pd_idx) + i += raid_disks; + i -= (sh->pd_idx + 1); + } break; case ALGORITHM_LEFT_ASYMMETRIC_6: case ALGORITHM_RIGHT_ASYMMETRIC_6: diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index dcefdc9629e..dd708359b45 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -488,7 +488,7 @@ static inline int algorithm_valid_raid6(int layout) { return (layout >= 0 && layout <= 5) || - (layout == 8 || layout == 10) + (layout >= 8 && layout <= 10) || (layout >= 16 && layout <= 20); } -- GitLab From 5e5e3e78ed9038b8f7112835d07084eefb9daa47 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 16:35:30 +1100 Subject: [PATCH 0085/1165] md: Fix handling of raid5 array which is being reshaped to fewer devices. When a raid5 (or raid6) array is being reshaped to have fewer devices, conf->raid_disks is the latter and hence smaller number of devices. However sometimes we want to use a number which is the total number of currently required devices - the larger of the 'old' and 'new' sizes. Before we implemented reducing the number of devices, this was always 'new' i.e. ->raid_disks. Now we need max(raid_disks, previous_raid_disks) in those places. This particularly affects assembling an array that was shutdown while in the middle of a reshape to fewer devices. md.c needs a similar fix when interpreting the md metadata. Signed-off-by: NeilBrown --- drivers/md/md.c | 2 +- drivers/md/raid5.c | 37 ++++++++++++++++++------------------- 2 files changed, 19 insertions(+), 20 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 26ba42a7912..10eb1fce975 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2631,7 +2631,7 @@ static void analyze_sbs(mddev_t * mddev) rdev->desc_nr = i++; rdev->raid_disk = rdev->desc_nr; set_bit(In_sync, &rdev->flags); - } else if (rdev->raid_disk >= mddev->raid_disks) { + } else if (rdev->raid_disk >= (mddev->raid_disks - min(0, mddev->delta_disks))) { rdev->raid_disk = -1; clear_bit(In_sync, &rdev->flags); } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index d4ce51b4d41..c4366c9373c 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1238,22 +1238,22 @@ static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request) static int grow_one_stripe(raid5_conf_t *conf) { struct stripe_head *sh; + int disks = max(conf->raid_disks, conf->previous_raid_disks); sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL); if (!sh) return 0; - memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev)); + memset(sh, 0, sizeof(*sh) + (disks-1)*sizeof(struct r5dev)); sh->raid_conf = conf; spin_lock_init(&sh->lock); #ifdef CONFIG_MULTICORE_RAID456 init_waitqueue_head(&sh->ops.wait_for_ops); #endif - if (grow_buffers(sh, conf->raid_disks)) { - shrink_buffers(sh, conf->raid_disks); + if (grow_buffers(sh, disks)) { + shrink_buffers(sh, disks); kmem_cache_free(conf->slab_cache, sh); return 0; } - sh->disks = conf->raid_disks; /* we just created an active stripe so... */ atomic_set(&sh->count, 1); atomic_inc(&conf->active_stripes); @@ -1265,7 +1265,7 @@ static int grow_one_stripe(raid5_conf_t *conf) static int grow_stripes(raid5_conf_t *conf, int num) { struct kmem_cache *sc; - int devs = conf->raid_disks; + int devs = max(conf->raid_disks, conf->previous_raid_disks); sprintf(conf->cache_name[0], "raid%d-%s", conf->level, mdname(conf->mddev)); @@ -3540,9 +3540,10 @@ static void unplug_slaves(mddev_t *mddev) { raid5_conf_t *conf = mddev->private; int i; + int devs = max(conf->raid_disks, conf->previous_raid_disks); rcu_read_lock(); - for (i = 0; i < conf->raid_disks; i++) { + for (i = 0; i < devs; i++) { mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev); if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) { struct request_queue *r_queue = bdev_get_queue(rdev->bdev); @@ -4562,13 +4563,9 @@ raid5_size(mddev_t *mddev, sector_t sectors, int raid_disks) if (!sectors) sectors = mddev->dev_sectors; - if (!raid_disks) { + if (!raid_disks) /* size is defined by the smallest of previous and new size */ - if (conf->raid_disks < conf->previous_raid_disks) - raid_disks = conf->raid_disks; - else - raid_disks = conf->previous_raid_disks; - } + raid_disks = min(conf->raid_disks, conf->previous_raid_disks); sectors &= ~((sector_t)mddev->chunk_sectors - 1); sectors &= ~((sector_t)mddev->new_chunk_sectors - 1); @@ -4669,7 +4666,7 @@ static int raid5_alloc_percpu(raid5_conf_t *conf) } per_cpu_ptr(conf->percpu, cpu)->spare_page = spare_page; } - scribble = kmalloc(scribble_len(conf->raid_disks), GFP_KERNEL); + scribble = kmalloc(conf->scribble_len, GFP_KERNEL); if (!scribble) { err = -ENOMEM; break; @@ -4690,7 +4687,7 @@ static int raid5_alloc_percpu(raid5_conf_t *conf) static raid5_conf_t *setup_conf(mddev_t *mddev) { raid5_conf_t *conf; - int raid_disk, memory; + int raid_disk, memory, max_disks; mdk_rdev_t *rdev; struct disk_info *disk; @@ -4740,13 +4737,14 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) conf->bypass_threshold = BYPASS_THRESHOLD; conf->raid_disks = mddev->raid_disks; - conf->scribble_len = scribble_len(conf->raid_disks); if (mddev->reshape_position == MaxSector) conf->previous_raid_disks = mddev->raid_disks; else conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks; + max_disks = max(conf->raid_disks, conf->previous_raid_disks); + conf->scribble_len = scribble_len(max_disks); - conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info), + conf->disks = kzalloc(max_disks * sizeof(struct disk_info), GFP_KERNEL); if (!conf->disks) goto abort; @@ -4764,7 +4762,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) list_for_each_entry(rdev, &mddev->disks, same_set) { raid_disk = rdev->raid_disk; - if (raid_disk >= conf->raid_disks + if (raid_disk >= max_disks || raid_disk < 0) continue; disk = conf->disks + raid_disk; @@ -4796,7 +4794,7 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) } memory = conf->max_nr_stripes * (sizeof(struct stripe_head) + - conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024; + max_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024; if (grow_stripes(conf, conf->max_nr_stripes)) { printk(KERN_ERR "raid5: couldn't allocate %dkB for buffers\n", memory); @@ -4921,7 +4919,8 @@ static int run(mddev_t *mddev) test_bit(In_sync, &rdev->flags)) working_disks++; - mddev->degraded = conf->raid_disks - working_disks; + mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks) + - working_disks); if (mddev->degraded > conf->max_degraded) { printk(KERN_ERR "raid5: not enough operational devices for %s" -- GitLab From 5dd33c9a4c29015f6d87568d33521c98931a387e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 16:40:25 +1100 Subject: [PATCH 0086/1165] md/async: don't pass a memory pointer as a page pointer. md/raid6 passes a list of 'struct page *' to the async_tx routines, which then either DMA map them for offload, or take the page_address for CPU based calculations. For RAID6 we sometime leave 'blanks' in the list of pages. For CPU based calcs, we want to treat theses as a page of zeros. For offloaded calculations, we simply don't pass a page to the hardware. Currently the 'blanks' are encoded as a pointer to raid6_empty_zero_page. This is a 4096 byte memory region, not a 'struct page'. This is mostly handled correctly but is rather ugly. So change the code to pass and expect a NULL pointer for the blanks. When taking page_address of a page, we need to check for a NULL and in that case use raid6_empty_zero_page. Signed-off-by: NeilBrown --- crypto/async_tx/async_pq.c | 15 ++++----------- crypto/async_tx/async_raid6_recov.c | 16 +++++++++++----- drivers/md/raid5.c | 4 ++-- 3 files changed, 17 insertions(+), 18 deletions(-) diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index b88db6d1dc6..9ab1ce4af3c 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -30,11 +30,6 @@ */ static struct page *scribble; -static bool is_raid6_zero_block(struct page *p) -{ - return p == (void *) raid6_empty_zero_page; -} - /* the struct page *blocks[] parameter passed to async_gen_syndrome() * and async_syndrome_val() contains the 'P' destination address at * blocks[disks-2] and the 'Q' destination address at blocks[disks-1] @@ -83,7 +78,7 @@ do_async_gen_syndrome(struct dma_chan *chan, struct page **blocks, * sources and update the coefficients accordingly */ for (i = 0, idx = 0; i < src_cnt; i++) { - if (is_raid6_zero_block(blocks[i])) + if (blocks[i] == NULL) continue; dma_src[idx] = dma_map_page(dma->dev, blocks[i], offset, len, DMA_TO_DEVICE); @@ -160,9 +155,9 @@ do_sync_gen_syndrome(struct page **blocks, unsigned int offset, int disks, srcs = (void **) blocks; for (i = 0; i < disks; i++) { - if (is_raid6_zero_block(blocks[i])) { + if (blocks[i] == NULL) { BUG_ON(i > disks - 3); /* P or Q can't be zero */ - srcs[i] = blocks[i]; + srcs[i] = (void*)raid6_empty_zero_page; } else srcs[i] = page_address(blocks[i]) + offset; } @@ -290,12 +285,10 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, if (submit->flags & ASYNC_TX_FENCE) dma_flags |= DMA_PREP_FENCE; for (i = 0; i < disks; i++) - if (likely(blocks[i])) { - BUG_ON(is_raid6_zero_block(blocks[i])); + if (likely(blocks[i])) dma_src[i] = dma_map_page(dev, blocks[i], offset, len, DMA_TO_DEVICE); - } for (;;) { tx = device->device_prep_dma_pq_val(chan, pq, dma_src, diff --git a/crypto/async_tx/async_raid6_recov.c b/crypto/async_tx/async_raid6_recov.c index 6d73dde4786..8e30b6ed078 100644 --- a/crypto/async_tx/async_raid6_recov.c +++ b/crypto/async_tx/async_raid6_recov.c @@ -263,10 +263,10 @@ __2data_recov_n(int disks, size_t bytes, int faila, int failb, * delta p and delta q */ dp = blocks[faila]; - blocks[faila] = (void *)raid6_empty_zero_page; + blocks[faila] = NULL; blocks[disks-2] = dp; dq = blocks[failb]; - blocks[failb] = (void *)raid6_empty_zero_page; + blocks[failb] = NULL; blocks[disks-1] = dq; init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble); @@ -338,7 +338,10 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) - ptrs[i] = page_address(blocks[i]); + if (blocks[i] == NULL) + ptrs[i] = (void*)raid6_empty_zero_page; + else + ptrs[i] = page_address(blocks[i]); raid6_2data_recov(disks, bytes, faila, failb, ptrs); @@ -398,7 +401,10 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) - ptrs[i] = page_address(blocks[i]); + if (blocks[i] == NULL) + ptrs[i] = (void*)raid6_empty_zero_page; + else + ptrs[i] = page_address(blocks[i]); raid6_datap_recov(disks, bytes, faila, ptrs); @@ -414,7 +420,7 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, * Use the dead data page as temporary storage for delta q */ dq = blocks[faila]; - blocks[faila] = (void *)raid6_empty_zero_page; + blocks[faila] = NULL; blocks[disks-1] = dq; /* in the 4 disk case we only need to perform a single source diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c4366c9373c..dcd9e659ed9 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -720,7 +720,7 @@ static int set_syndrome_sources(struct page **srcs, struct stripe_head *sh) int i; for (i = 0; i < disks; i++) - srcs[i] = (void *)raid6_empty_zero_page; + srcs[i] = NULL; count = 0; i = d0_idx; @@ -816,7 +816,7 @@ ops_run_compute6_2(struct stripe_head *sh, struct raid5_percpu *percpu) * slot number conversion for 'faila' and 'failb' */ for (i = 0; i < disks ; i++) - blocks[i] = (void *)raid6_empty_zero_page; + blocks[i] = NULL; count = 0; i = d0_idx; do { -- GitLab From b2141e6951ad56c8f65e70547baeabd5698e390a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 16 Oct 2009 16:40:34 +1100 Subject: [PATCH 0087/1165] raid6/async_tx: handle holes in block list in async_syndrome_val async_syndrome_val check the P and Q blocks used for RAID6 calculations. With DDF raid6, some of the data blocks might be NULL, so this needs to be handled in the same way that async_gen_syndrome handles it. As async_syndrome_val calls async_xor, also enhance async_xor to detect and skip NULL blocks in the list. Signed-off-by: NeilBrown --- crypto/async_tx/async_pq.c | 31 ++++++++++++++++++++++++------- crypto/async_tx/async_xor.c | 18 +++++++++++------- 2 files changed, 35 insertions(+), 14 deletions(-) diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index 9ab1ce4af3c..43b1436bd96 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -260,8 +260,10 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, len); struct dma_device *device = chan ? chan->device : NULL; struct dma_async_tx_descriptor *tx; + unsigned char coefs[disks-2]; enum dma_ctrl_flags dma_flags = submit->cb_fn ? DMA_PREP_INTERRUPT : 0; dma_addr_t *dma_src = NULL; + int src_cnt = 0; BUG_ON(disks < 4); @@ -280,20 +282,35 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, __func__, disks, len); if (!P(blocks, disks)) dma_flags |= DMA_PREP_PQ_DISABLE_P; + else + pq[0] = dma_map_page(dev, P(blocks,disks), + offset, len, + DMA_TO_DEVICE); if (!Q(blocks, disks)) dma_flags |= DMA_PREP_PQ_DISABLE_Q; + else + pq[1] = dma_map_page(dev, Q(blocks,disks), + offset, len, + DMA_TO_DEVICE); + if (submit->flags & ASYNC_TX_FENCE) dma_flags |= DMA_PREP_FENCE; - for (i = 0; i < disks; i++) - if (likely(blocks[i])) - dma_src[i] = dma_map_page(dev, blocks[i], - offset, len, - DMA_TO_DEVICE); + for (i = 0; i < disks-2; i++) + if (likely(blocks[i])) { + dma_src[src_cnt] = dma_map_page(dev, blocks[i], + offset, len, + DMA_TO_DEVICE); + coefs[src_cnt] = raid6_gfexp[i]; + src_cnt++; + } + pq[1] = dma_map_page(dev, Q(blocks,disks), + offset, len, + DMA_TO_DEVICE); for (;;) { tx = device->device_prep_dma_pq_val(chan, pq, dma_src, - disks - 2, - raid6_gfexp, + src_cnt, + coefs, len, pqres, dma_flags); if (likely(tx)) diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c index b459a9034aa..79182dcb91b 100644 --- a/crypto/async_tx/async_xor.c +++ b/crypto/async_tx/async_xor.c @@ -44,20 +44,23 @@ do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list, void *cb_param_orig = submit->cb_param; enum async_tx_flags flags_orig = submit->flags; enum dma_ctrl_flags dma_flags; - int xor_src_cnt; + int xor_src_cnt = 0; dma_addr_t dma_dest; /* map the dest bidrectional in case it is re-used as a source */ dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL); for (i = 0; i < src_cnt; i++) { /* only map the dest once */ + if (!src_list[i]) + continue; if (unlikely(src_list[i] == dest)) { - dma_src[i] = dma_dest; + dma_src[xor_src_cnt++] = dma_dest; continue; } - dma_src[i] = dma_map_page(dma->dev, src_list[i], offset, - len, DMA_TO_DEVICE); + dma_src[xor_src_cnt++] = dma_map_page(dma->dev, src_list[i], offset, + len, DMA_TO_DEVICE); } + src_cnt = xor_src_cnt; while (src_cnt) { submit->flags = flags_orig; @@ -123,7 +126,7 @@ do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset, int src_cnt, size_t len, struct async_submit_ctl *submit) { int i; - int xor_src_cnt; + int xor_src_cnt = 0; int src_off = 0; void *dest_buf; void **srcs; @@ -135,8 +138,9 @@ do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset, /* convert to buffer pointers */ for (i = 0; i < src_cnt; i++) - srcs[i] = page_address(src_list[i]) + offset; - + if (src_list[i]) + srcs[xor_src_cnt++] = page_address(src_list[i]) + offset; + src_cnt = xor_src_cnt; /* set destination address */ dest_buf = page_address(dest) + offset; -- GitLab From 036ed8ba61b72c19dc5759446d4fe0844aa88255 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Thu, 15 Oct 2009 17:40:00 -0500 Subject: [PATCH 0088/1165] x86, UV: Fix information in __uv_hub_info structure A few parts of the uv_hub_info structure are initialized incorrectly. - n_val is being loaded with m_val. - gpa_mask is initialized with a bytes instead of an unsigned long. - Handle the case where none of the alias registers are used. Lastly I converted the bau over to using the uv_hub_info->m_val which is the correct value. Without this patch, booting a large configuration hits a problem where the upper bits of the gnode affect the pnode and the bau will not operate. Signed-off-by: Robin Holt Acked-by: Jack Steiner Cc: Cliff Whickman Cc: stable@kernel.org LKML-Reference: <20091015224946.396355000@alcatraz.americas.sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_uv_x.c | 8 ++++---- arch/x86/kernel/tlb_uv.c | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index f5f5886a6b5..326c25477d3 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -352,14 +352,14 @@ static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size) for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) { alias.v = uv_read_local_mmr(redir_addrs[i].alias); - if (alias.s.base == 0) { + if (alias.s.enable && alias.s.base == 0) { *size = (1UL << alias.s.m_alias); redirect.v = uv_read_local_mmr(redir_addrs[i].redirect); *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT; return; } } - BUG(); + *base = *size = 0; } enum map_type {map_wb, map_uc}; @@ -619,12 +619,12 @@ void __init uv_system_init(void) uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base; uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size; uv_cpu_hub_info(cpu)->m_val = m_val; - uv_cpu_hub_info(cpu)->n_val = m_val; + uv_cpu_hub_info(cpu)->n_val = n_val; uv_cpu_hub_info(cpu)->numa_blade_id = blade; uv_cpu_hub_info(cpu)->blade_processor_id = lcpu; uv_cpu_hub_info(cpu)->pnode = pnode; uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; - uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1; + uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1; uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper; uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra; uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base; diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 503c1f2e883..f99fb6acfe3 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -843,8 +843,8 @@ static int __init uv_bau_init(void) GFP_KERNEL, cpu_to_node(cur_cpu)); uv_bau_retry_limit = 1; - uv_nshift = uv_hub_info->n_val; - uv_mmask = (1UL << uv_hub_info->n_val) - 1; + uv_nshift = uv_hub_info->m_val; + uv_mmask = (1UL << uv_hub_info->m_val) - 1; nblades = uv_num_possible_blades(); uv_bau_table_bases = (struct bau_control **) -- GitLab From 93ae5012a79b11e7fc855b52c7ce1e16fe1540b0 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 15 Oct 2009 14:21:14 -0700 Subject: [PATCH 0089/1165] x86: Don't print number of MCE banks for every CPU The MCE initialization code explicitly says it doesn't handle asymmetric configurations where different CPUs support different numbers of MCE banks, and it prints a big warning in that case. Therefore, printing the "mce: CPU supports MCE banks" message into the kernel log for every CPU is pure redundancy that clutters the log significantly for systems with lots of CPUs. Signed-off-by: Roland Dreier LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mcheck/mce.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index b1598a9436d..721a77ca811 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -1214,7 +1214,8 @@ static int __cpuinit mce_cap_init(void) rdmsrl(MSR_IA32_MCG_CAP, cap); b = cap & MCG_BANKCNT_MASK; - printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b); + if (!banks) + printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b); if (b > MAX_NR_BANKS) { printk(KERN_WARNING -- GitLab From 89061d3d58e1f0742139605dc6a7950aa1ecc019 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Thu, 15 Oct 2009 15:30:48 -0700 Subject: [PATCH 0090/1165] futex: Move drop_futex_key_refs out of spinlock'ed region When requeuing tasks from one futex to another, the reference held by the requeued task to the original futex location needs to be dropped eventually. Dropping the reference may ultimately lead to a call to "iput_final" and subsequently call into filesystem- specific code - which may be non-atomic. It is therefore safer to defer this drop operation until after the futex_hash_bucket spinlock has been dropped. Originally-From: Helge Bahmann Signed-off-by: Darren Hart Cc: Cc: Peter Zijlstra Cc: Eric Dumazet Cc: Dinakar Guniguntala Cc: John Stultz Cc: Sven-Thorsten Dietrich Cc: John Kacur LKML-Reference: <4AD7A298.5040802@us.ibm.com> Signed-off-by: Ingo Molnar --- kernel/futex.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/futex.c b/kernel/futex.c index 06938e560ac..642f3bbaacc 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -1029,7 +1029,6 @@ static inline void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key, struct futex_hash_bucket *hb) { - drop_futex_key_refs(&q->key); get_futex_key_refs(key); q->key = *key; @@ -1227,6 +1226,7 @@ retry_private: */ if (ret == 1) { WARN_ON(pi_state); + drop_count++; task_count++; ret = get_futex_value_locked(&curval2, uaddr2); if (!ret) @@ -1305,6 +1305,7 @@ retry_private: if (ret == 1) { /* We got the lock. */ requeue_pi_wake_futex(this, &key2, hb2); + drop_count++; continue; } else if (ret) { /* -EDEADLK */ -- GitLab From 2d152c6ba81c8a7776103b517fa454b8da0419aa Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:08:05 -0400 Subject: [PATCH 0091/1165] drm/radeon/kms: fix legacy quirk handling Need to check the return type for the quirk function to decide whether we add the connectors and encoders. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index e91aba8530b..3c402b957f0 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1626,8 +1626,9 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) break; } - radeon_apply_legacy_quirks(dev, i, &connector, - &ddc_i2c); + if (!radeon_apply_legacy_quirks(dev, i, &connector, + &ddc_i2c)) + continue; switch (connector) { case CONNECTOR_PROPRIETARY_LEGACY: -- GitLab From d0c403e950d449c8c413a1fbf05dfec45ce03e55 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:38:32 -0400 Subject: [PATCH 0092/1165] drm/radeon/kms: fix support for original r100 Original radeon didn't have a connector table in the bios. Check for the CRT table and if we have one, add a VGA connector. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 3c402b957f0..8298c990be7 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1773,8 +1773,25 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) DRM_MODE_CONNECTOR_DVII, &ddc_i2c); } else { - DRM_DEBUG("No connector info found\n"); - return false; + uint16_t crt_info = + combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); + DRM_DEBUG("Found CRT table, assuming VGA connector\n"); + if (crt_info) { + radeon_add_legacy_encoder(dev, + radeon_get_encoder_id(dev, + ATOM_DEVICE_CRT1_SUPPORT, + 1), + ATOM_DEVICE_CRT1_SUPPORT); + ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); + radeon_add_legacy_connector(dev, + 0, + ATOM_DEVICE_CRT1_SUPPORT, + DRM_MODE_CONNECTOR_VGA, + &ddc_i2c); + } else { + DRM_DEBUG("No connector info found\n"); + return false; + } } } -- GitLab From 210f9cb2cf2effca690271085f4bd6a3ea286e6c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 16 Oct 2009 10:34:28 +0200 Subject: [PATCH 0093/1165] perf tools: Bump version to 0.0.2 We released the first version of perf with 0.0.1 in v2.6.31, time to double our version number to 0.0.2 ;-) Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker LKML-Reference: Signed-off-by: Ingo Molnar --- tools/perf/util/PERF-VERSION-GEN | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/PERF-VERSION-GEN b/tools/perf/util/PERF-VERSION-GEN index c561d1538c0..54552a00a11 100755 --- a/tools/perf/util/PERF-VERSION-GEN +++ b/tools/perf/util/PERF-VERSION-GEN @@ -1,7 +1,7 @@ #!/bin/sh GVF=PERF-VERSION-FILE -DEF_VER=v0.0.1.PERF +DEF_VER=v0.0.2.PERF LF=' ' -- GitLab From 1d21e6e3ffad2939f9d8179817c6f9bc3b811b68 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Fri, 16 Oct 2009 06:29:20 -0500 Subject: [PATCH 0094/1165] x86, UV: Fix and clean up bau code to use uv_gpa_to_pnode() Create an inline function to extract the pnode from a global physical address and then convert the broadcast assist unit to use the newly created uv_gpa_to_pnode function. The open-coded code was wrong as well - it might explain a few of our unexplained bau hangs. Signed-off-by: Robin Holt Acked-by: Cliff Whickman Cc: linux-mm@kvack.org Cc: Jack Steiner LKML-Reference: <20091016112920.GZ8903@sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uv/uv_hub.h | 16 +++++++++++++++- arch/x86/kernel/tlb_uv.c | 7 ++----- 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 04eb6c958b9..94908a08020 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -114,7 +114,7 @@ /* * The largest possible NASID of a C or M brick (+ 2) */ -#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2) +#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_BLADES * 2) struct uv_scir_s { struct timer_list timer; @@ -230,6 +230,20 @@ static inline unsigned long uv_gpa(void *v) return uv_soc_phys_ram_to_gpa(__pa(v)); } +/* gnode -> pnode */ +static inline unsigned long uv_gpa_to_gnode(unsigned long gpa) +{ + return gpa >> uv_hub_info->m_val; +} + +/* gpa -> pnode */ +static inline int uv_gpa_to_pnode(unsigned long gpa) +{ + unsigned long n_mask = (1UL << uv_hub_info->n_val) - 1; + + return uv_gpa_to_gnode(gpa) & n_mask; +} + /* pnode, offset --> socket virtual */ static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset) { diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index f99fb6acfe3..1740c85e24b 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -23,8 +23,6 @@ static struct bau_control **uv_bau_table_bases __read_mostly; static int uv_bau_retry_limit __read_mostly; -/* position of pnode (which is nasid>>1): */ -static int uv_nshift __read_mostly; /* base pnode in this partition */ static int uv_partition_base_pnode __read_mostly; @@ -723,7 +721,7 @@ uv_activation_descriptor_init(int node, int pnode) BUG_ON(!adp); pa = uv_gpa(adp); /* need the real nasid*/ - n = pa >> uv_nshift; + n = uv_gpa_to_pnode(pa); m = pa & uv_mmask; uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, @@ -778,7 +776,7 @@ uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp) * need the pnode of where the memory was really allocated */ pa = uv_gpa(pqp); - pn = pa >> uv_nshift; + pn = uv_gpa_to_pnode(pa); uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | @@ -843,7 +841,6 @@ static int __init uv_bau_init(void) GFP_KERNEL, cpu_to_node(cur_cpu)); uv_bau_retry_limit = 1; - uv_nshift = uv_hub_info->m_val; uv_mmask = (1UL << uv_hub_info->m_val) - 1; nblades = uv_num_possible_blades(); -- GitLab From 01373046612d2bbd01064c3beaf18ff3338dafae Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 11 Oct 2009 18:50:09 -0700 Subject: [PATCH 0095/1165] pcmcia: fix controller printk format warnings Fix new pcmcia printk format warnings: [This has now moved from linux-next to mainline. Originally sent 2009-SEP-17.] drivers/pcmcia/i82365.c:1055: warning: format '%#x' expects type 'unsigned int', but argument 6 has type 'phys_addr_t' drivers/pcmcia/i82365.c:1055: warning: format '%#x' expects type 'unsigned int', but argument 7 has type 'phys_addr_t' drivers/pcmcia/tcic.c:734: warning: format '%#x' expects type 'unsigned int', but argument 6 has type 'phys_addr_t' drivers/pcmcia/tcic.c:734: warning: format '%#x' expects type 'unsigned int', but argument 7 has type 'phys_addr_t' Signed-off-by: Randy Dunlap Signed-off-by: Dominik Brodowski --- drivers/pcmcia/i82365.c | 4 ++-- drivers/pcmcia/tcic.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index b906abe26ad..a4aacb830b8 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -1053,8 +1053,8 @@ static int i365_set_io_map(u_short sock, struct pccard_io_map *io) u_char map, ioctl; debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#x-%#x)\n", sock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", sock, io->map, io->flags, io->speed, + (unsigned long long)io->start, (unsigned long long)io->stop); map = io->map; if ((map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)) return -EINVAL; diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index 582413fcb62..6918849d511 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -732,8 +732,8 @@ static int tcic_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) u_short base, len, ioctl; debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#x-%#x)\n", psock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", psock, io->map, io->flags, io->speed, + (unsigned long long)io->start, (unsigned long long)io->stop); if ((io->map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)) return -EINVAL; tcic_setw(TCIC_ADDR+2, TCIC_ADR2_INDREG | (psock << TCIC_SS_SHFT)); -- GitLab From 30514ccfc5651b0b1eb27d5ac1cb580b152cd85f Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Sat, 17 Oct 2009 13:35:30 +0200 Subject: [PATCH 0096/1165] pcmcia: properly close previous dev_printk if kzalloc fails in do_io_probe Signed-off-by: Frans Pop Signed-off-by: Dominik Brodowski --- drivers/pcmcia/rsrc_nonstatic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 9ca22c7aafb..909b1968098 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -206,6 +206,7 @@ static void do_io_probe(struct pcmcia_socket *s, unsigned int base, /* First, what does a floating port look like? */ b = kzalloc(256, GFP_KERNEL); if (!b) { + printk("\n"); dev_printk(KERN_ERR, &s->dev, "do_io_probe: unable to kmalloc 256 bytes"); return; -- GitLab From 0bff2fc319c2a3cb8969c71fdc2f941a15319b2c Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Thu, 15 Oct 2009 10:11:09 +0200 Subject: [PATCH 0097/1165] [ARM] pxa/cm-x300: fix mmc numbering CM-X300 has libertas on mmc2 and SD card slot on mmc1. This patch fixes wrong MMC ports assignment. Signed-off-by: Igor Grinberg Signed-off-by: Mike Rapoport Signed-off-by: Eric Miao --- arch/arm/mach-pxa/cm-x300.c | 38 ++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index aac2cda60e0..102916f1e46 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -43,10 +43,10 @@ #define CM_X300_ETH_PHYS 0x08000010 -#define GPIO82_MMC2_IRQ (82) -#define GPIO85_MMC2_WP (85) +#define GPIO82_MMC_IRQ (82) +#define GPIO85_MMC_WP (85) -#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ) +#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ) #define GPIO95_RTC_CS (95) #define GPIO96_RTC_WR (96) @@ -292,37 +292,37 @@ static inline void cm_x300_init_nand(void) {} #endif #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE) -/* The first MMC slot of CM-X300 is hardwired to Libertas card and has +static struct pxamci_platform_data cm_x300_mci_platform_data = { + .detect_delay = 20, + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .gpio_card_detect = GPIO82_MMC_IRQ, + .gpio_card_ro = GPIO85_MMC_WP, + .gpio_power = -1, +}; + +/* The second MMC slot of CM-X300 is hardwired to Libertas card and has no detection/ro pins */ -static int cm_x300_mci_init(struct device *dev, - irq_handler_t cm_x300_detect_int, - void *data) +static int cm_x300_mci2_init(struct device *dev, + irq_handler_t cm_x300_detect_int, + void *data) { return 0; } -static void cm_x300_mci_exit(struct device *dev, void *data) +static void cm_x300_mci2_exit(struct device *dev, void *data) { } -static struct pxamci_platform_data cm_x300_mci_platform_data = { +static struct pxamci_platform_data cm_x300_mci2_platform_data = { .detect_delay = 20, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .init = cm_x300_mci_init, - .exit = cm_x300_mci_exit, + .init = cm_x300_mci2_init, + .exit = cm_x300_mci2_exit, .gpio_card_detect = -1, .gpio_card_ro = -1, .gpio_power = -1, }; -static struct pxamci_platform_data cm_x300_mci2_platform_data = { - .detect_delay = 20, - .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, - .gpio_card_detect = GPIO82_MMC2_IRQ, - .gpio_card_ro = GPIO85_MMC2_WP, - .gpio_power = -1, -}; - static void __init cm_x300_init_mmc(void) { pxa_set_mci_info(&cm_x300_mci_platform_data); -- GitLab From f6919eb41127db2e06342efcc2da1eeb4646ec34 Mon Sep 17 00:00:00 2001 From: Stanislav Brabec Date: Fri, 16 Oct 2009 20:50:05 +0200 Subject: [PATCH 0098/1165] [ARM] pxa/spitz: add gpio button support (fixes regression) Updating desc for lid keys and resending patch with proper comments: Define Spitz buttons as GPIO keys in a way compatible with the old driver: On/Off: As Suspend EV_PWR key Raw values of lid sensors SWA and SWB: As EV_SW switches SWA: Display Down SWB: Lid Closed Recommended user space decoding: SWA==0 & SWB==0: lid opened (landscape mode) SWA==1 & SWB==0: invalid (or mechanic race condition) SWA==0 & SWB==1: lid closed with display up (portrait mode or mechanic race condition while closing to display-less mode) SWA==1 & SWB==1: lid closed with display down (display-less mode) AK_INT remote trigger is not mapped as input event. Without complete remote driver and remote pull-up control it has no useful interpretation. Signed-off-by: Stanislav Brabec Acked-by: Pavel Machek Signed-off-by: Eric Miao --- arch/arm/mach-pxa/spitz.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index ee8d6038ce8..82ff5733e4d 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = { }; +static struct gpio_keys_button spitz_gpio_keys[] = { + { + .type = EV_PWR, + .code = KEY_SUSPEND, + .gpio = SPITZ_GPIO_ON_KEY, + .desc = "On/Off", + .wakeup = 1, + }, + /* Two buttons detecting the lid state */ + { + .type = EV_SW, + .code = 0, + .gpio = SPITZ_GPIO_SWA, + .desc = "Display Down", + }, + { + .type = EV_SW, + .code = 1, + .gpio = SPITZ_GPIO_SWB, + .desc = "Lid Closed", + }, +}; + +static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = { + .buttons = spitz_gpio_keys, + .nbuttons = ARRAY_SIZE(spitz_gpio_keys), +}; + +static struct platform_device spitz_gpio_keys_device = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &spitz_gpio_keys_platform_data, + }, +}; + + /* * Spitz LEDs */ @@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = { static struct platform_device *devices[] __initdata = { &spitzscoop_device, &spitzkbd_device, + &spitz_gpio_keys_device, &spitzled_device, &sharpsl_nand_device, &sharpsl_rom_device, -- GitLab From 8c5b0f9a85cd78e98123417a8e9d58857968ff13 Mon Sep 17 00:00:00 2001 From: Leo Chen Date: Thu, 15 Oct 2009 22:45:41 +0100 Subject: [PATCH 0099/1165] ARM: 5764/1: bcmring: add oprofile pmu support add oprofile pmu support for bcmring. Signed-off-by: Leo Hao Chen Signed-off-by: Russell King --- arch/arm/oprofile/op_model_v6.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/oprofile/op_model_v6.c b/arch/arm/oprofile/op_model_v6.c index fe581383d3e..f7d2ec5ee9a 100644 --- a/arch/arm/oprofile/op_model_v6.c +++ b/arch/arm/oprofile/op_model_v6.c @@ -33,6 +33,9 @@ static int irqs[] = { #ifdef CONFIG_ARCH_OMAP2 3, #endif +#ifdef CONFIG_ARCH_BCMRING + IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */ +#endif }; static void armv6_pmu_stop(void) -- GitLab From 84897fc0524d7cbfc81d0bdf9f92ade6e3c3816b Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sun, 18 Oct 2009 23:51:09 +0200 Subject: [PATCH 0100/1165] pcmcia: pccard_read_tuple and TUPLE_RETURN_COMMON cleanup pccard_read_tuple(), which is only used by the PCMCIA core, should handle TUPLE_RETURN_COMMON more sensibly: If a specific function (which may be 0) is requested, set tuple.Attributes = 0 as was done in all PCMCIA drivers. If, however, BIND_FN_ALL is requested, return the "common" tuple. As to the callers of pccard_read_tuple(): - All calls to pcmcia_validate_cis() had set the "function" parameter to BIND_FN_ALL. Therefore, remove the "function" parameter and make the parameter to pccard_read_tuple explicit. - Calls to CISTPL_VERS_1 and CISTPL_MANFID now set BIND_FN_ALL. This was already the case for calls to CISTPL_LONGLINK_MFC. Signed-off-by: Dominik Brodowski --- drivers/pcmcia/cistpl.c | 20 +++++++++++--------- drivers/pcmcia/cs_internal.h | 3 +-- drivers/pcmcia/ds.c | 6 +++--- drivers/pcmcia/pcmcia_ioctl.c | 2 +- drivers/pcmcia/rsrc_nonstatic.c | 2 +- drivers/pcmcia/socket_sysfs.c | 2 +- 6 files changed, 18 insertions(+), 17 deletions(-) diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index 4a110b7b267..6c4a4fc8363 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -1463,7 +1463,9 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t return -ENOMEM; } tuple.DesiredTuple = code; - tuple.Attributes = TUPLE_RETURN_COMMON; + tuple.Attributes = 0; + if (function == BIND_FN_ALL) + tuple.Attributes = TUPLE_RETURN_COMMON; ret = pccard_get_first_tuple(s, function, &tuple); if (ret != 0) goto done; @@ -1490,7 +1492,7 @@ EXPORT_SYMBOL(pccard_read_tuple); ======================================================================*/ -int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned int *info) +int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *info) { tuple_t *tuple; cisparse_t *p; @@ -1515,30 +1517,30 @@ int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned count = reserved = 0; tuple->DesiredTuple = RETURN_FIRST_TUPLE; tuple->Attributes = TUPLE_RETURN_COMMON; - ret = pccard_get_first_tuple(s, function, tuple); + ret = pccard_get_first_tuple(s, BIND_FN_ALL, tuple); if (ret != 0) goto done; /* First tuple should be DEVICE; we should really have either that or a CFTABLE_ENTRY of some sort */ if ((tuple->TupleCode == CISTPL_DEVICE) || - (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == 0) || - (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == 0)) + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY, p) == 0) || + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY_CB, p) == 0)) dev_ok++; /* All cards should have a MANFID tuple, and/or a VERS_1 or VERS_2 tuple, for card identification. Certain old D-Link and Linksys cards have only a broken VERS_2 tuple; hence the bogus test. */ - if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == 0) || - (pccard_read_tuple(s, function, CISTPL_VERS_1, p) == 0) || - (pccard_read_tuple(s, function, CISTPL_VERS_2, p) != -ENOSPC)) + if ((pccard_read_tuple(s, BIND_FN_ALL, CISTPL_MANFID, p) == 0) || + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_1, p) == 0) || + (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_2, p) != -ENOSPC)) ident_ok++; if (!dev_ok && !ident_ok) goto done; for (count = 1; count < MAX_TUPLES; count++) { - ret = pccard_get_next_tuple(s, function, tuple); + ret = pccard_get_next_tuple(s, BIND_FN_ALL, tuple); if (ret != 0) break; if (((tuple->TupleCode > 0x23) && (tuple->TupleCode < 0x40)) || diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h index 79615e6d540..1f4098f1354 100644 --- a/drivers/pcmcia/cs_internal.h +++ b/drivers/pcmcia/cs_internal.h @@ -197,8 +197,7 @@ int pccard_read_tuple(struct pcmcia_socket *s, unsigned int function, cisdata_t code, void *parse); int pcmcia_replace_cis(struct pcmcia_socket *s, const u8 *data, const size_t len); -int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, - unsigned int *count); +int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *count); /* rsrc_mgr.c */ int pcmcia_validate_mem(struct pcmcia_socket *s); diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 9f300d3cb12..c70fb3bc0e0 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -547,7 +547,7 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev) if (!vers1) return -ENOMEM; - if (!pccard_read_tuple(p_dev->socket, p_dev->func, + if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_MANFID, &manf_id)) { p_dev->manf_id = manf_id.manf; p_dev->card_id = manf_id.card; @@ -581,7 +581,7 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev) kfree(devgeo); } - if (!pccard_read_tuple(p_dev->socket, p_dev->func, CISTPL_VERS_1, + if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_VERS_1, vers1)) { for (i=0; i < vers1->ns; i++) { char *tmp; @@ -733,7 +733,7 @@ static int pcmcia_card_add(struct pcmcia_socket *s) return -EAGAIN; /* try again, but later... */ } - ret = pccard_validate_cis(s, BIND_FN_ALL, &no_chains); + ret = pccard_validate_cis(s, &no_chains); if (ret || !no_chains) { ds_dev_dbg(0, &s->dev, "invalid CIS or invalid resources\n"); return -ENODEV; diff --git a/drivers/pcmcia/pcmcia_ioctl.c b/drivers/pcmcia/pcmcia_ioctl.c index 32c44040c1e..30cf71d2ee2 100644 --- a/drivers/pcmcia/pcmcia_ioctl.c +++ b/drivers/pcmcia/pcmcia_ioctl.c @@ -881,7 +881,7 @@ static int ds_ioctl(struct inode * inode, struct file * file, mutex_lock(&s->skt_mutex); pcmcia_validate_mem(s); mutex_unlock(&s->skt_mutex); - ret = pccard_validate_cis(s, BIND_FN_ALL, &buf->cisinfo.Chains); + ret = pccard_validate_cis(s, &buf->cisinfo.Chains); break; case DS_SUSPEND_CARD: ret = pcmcia_suspend_card(s); diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 909b1968098..7039f3cf5b7 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -276,7 +276,7 @@ static int readable(struct pcmcia_socket *s, struct resource *res, s->cis_mem.res = res; s->cis_virt = ioremap(res->start, s->map_size); if (s->cis_virt) { - ret = pccard_validate_cis(s, BIND_FN_ALL, count); + ret = pccard_validate_cis(s, count); /* invalidate mapping and CIS cache */ iounmap(s->cis_virt); s->cis_virt = NULL; diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index ff9a3bb3c88..78d5aab542f 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -300,7 +300,7 @@ static ssize_t pccard_show_cis(struct kobject *kobj, if (!(s->state & SOCKET_PRESENT)) return -ENODEV; - if (pccard_validate_cis(s, BIND_FN_ALL, &chains)) + if (pccard_validate_cis(s, &chains)) return -EIO; if (!chains) return -ENODATA; -- GitLab From c5e09528beb2c345403a64205db3b5aca568fec0 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Mon, 19 Oct 2009 00:04:25 +0200 Subject: [PATCH 0101/1165] pcmcia: do not try to store more than 4 version strings ... for struct pcmcia_device only provides for 4 anyway. Signed-off-by: Dominik Brodowski --- drivers/pcmcia/ds.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index c70fb3bc0e0..f5b7079f13d 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -583,7 +583,7 @@ static int pcmcia_device_query(struct pcmcia_device *p_dev) if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_VERS_1, vers1)) { - for (i=0; i < vers1->ns; i++) { + for (i = 0; i < min_t(unsigned int, 4, vers1->ns); i++) { char *tmp; unsigned int length; -- GitLab From e43c3afb367112a5b357f9adfac7817255129c88 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Tue, 29 Sep 2009 13:16:20 +0800 Subject: [PATCH 0102/1165] HWPOISON: return early on non-LRU pages Right now we have some trouble with non atomic access to page flags when locking the page. To plug this hole for now, limit error recovery to LRU pages for now. This could be better fixed by defining a suitable protocol, but let's go this simple way for now This avoids unnecessary races with __set_page_locked() and __SetPageSlab*() and maybe more non-atomic page flag operations. This loses isolated pages which are currently in page reclaim, but these are relatively limited compared to the total memory. Signed-off-by: Wu Fengguang Signed-off-by: Andi Kleen [AK: new description, bug fixes, cleanups] --- mm/memory-failure.c | 49 ++++++++++++++++++++++----------------------- 1 file changed, 24 insertions(+), 25 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 729d4b15b64..e17ec3f1c63 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -370,9 +370,6 @@ static int me_pagecache_clean(struct page *p, unsigned long pfn) int ret = FAILED; struct address_space *mapping; - if (!isolate_lru_page(p)) - page_cache_release(p); - /* * For anonymous pages we're done the only reference left * should be the one m_f() holds. @@ -498,30 +495,18 @@ static int me_pagecache_dirty(struct page *p, unsigned long pfn) */ static int me_swapcache_dirty(struct page *p, unsigned long pfn) { - int ret = FAILED; - ClearPageDirty(p); /* Trigger EIO in shmem: */ ClearPageUptodate(p); - if (!isolate_lru_page(p)) { - page_cache_release(p); - ret = DELAYED; - } - - return ret; + return DELAYED; } static int me_swapcache_clean(struct page *p, unsigned long pfn) { - int ret = FAILED; - - if (!isolate_lru_page(p)) { - page_cache_release(p); - ret = RECOVERED; - } delete_from_swap_cache(p); - return ret; + + return RECOVERED; } /* @@ -611,8 +596,6 @@ static struct page_state { { 0, 0, "unknown page state", me_unknown }, }; -#undef lru - static void action_result(unsigned long pfn, char *msg, int result) { struct page *page = NULL; @@ -664,9 +647,6 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn, if (PageReserved(p) || PageCompound(p) || PageSlab(p)) return; - if (!PageLRU(p)) - lru_add_drain_all(); - /* * This check implies we don't kill processes if their pages * are in the swap cache early. Those are always late kills. @@ -738,6 +718,7 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn, int __memory_failure(unsigned long pfn, int trapno, int ref) { + unsigned long lru_flag; struct page_state *ps; struct page *p; int res; @@ -774,6 +755,24 @@ int __memory_failure(unsigned long pfn, int trapno, int ref) return PageBuddy(compound_head(p)) ? 0 : -EBUSY; } + /* + * We ignore non-LRU pages for good reasons. + * - PG_locked is only well defined for LRU pages and a few others + * - to avoid races with __set_page_locked() + * - to avoid races with __SetPageSlab*() (and more non-atomic ops) + * The check (unnecessarily) ignores LRU pages being isolated and + * walked by the page reclaim code, however that's not a big loss. + */ + if (!PageLRU(p)) + lru_add_drain_all(); + lru_flag = p->flags & lru; + if (isolate_lru_page(p)) { + action_result(pfn, "non LRU", IGNORED); + put_page(p); + return -EBUSY; + } + page_cache_release(p); + /* * Lock the page and wait for writeback to finish. * It's very difficult to mess with pages currently under IO @@ -790,7 +789,7 @@ int __memory_failure(unsigned long pfn, int trapno, int ref) /* * Torn down by someone else? */ - if (PageLRU(p) && !PageSwapCache(p) && p->mapping == NULL) { + if ((lru_flag & lru) && !PageSwapCache(p) && p->mapping == NULL) { action_result(pfn, "already truncated LRU", IGNORED); res = 0; goto out; @@ -798,7 +797,7 @@ int __memory_failure(unsigned long pfn, int trapno, int ref) res = -EBUSY; for (ps = error_states;; ps++) { - if ((p->flags & ps->mask) == ps->res) { + if (((p->flags | lru_flag)& ps->mask) == ps->res) { res = page_action(ps, p, pfn, ref); break; } -- GitLab From 4779cb31c0ee3b355116745edca3f3e5fe865553 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 14 Oct 2009 01:51:41 +0200 Subject: [PATCH 0103/1165] HWPOISON: Fix page count leak in hwpoison late kill in do_swap_page When returning due to a poisoned page drop the page count. It wasn't a fatal problem because noone cares about the page count on a poisoned page (except when it wraps), but it's cleaner to fix it. Pointed out by Linus. Signed-off-by: Andi Kleen --- mm/memory.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/memory.c b/mm/memory.c index 7e91b5f9f69..7a3b0ad5594 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2539,7 +2539,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma, } else if (PageHWPoison(page)) { ret = VM_FAULT_HWPOISON; delayacct_clear_flag(DELAYACCT_PF_SWAPIN); - goto out; + goto out_release; } lock_page(page); @@ -2611,6 +2611,7 @@ out_nomap: pte_unmap_unlock(page_table, ptl); out_page: unlock_page(page); +out_release: page_cache_release(page); return ret; } -- GitLab From 01e00f880ca700376e1845cf7a2524ebe68e47d6 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Tue, 13 Oct 2009 15:02:11 +0100 Subject: [PATCH 0104/1165] HWPOISON: fix oops on ksm pages Memory failure on a KSM page currently oopses on its NULL anon_vma in page_lock_anon_vma(): that may not be much worse than the consequence of ignoring it, but it is better to be consistent with how ZERO_PAGE and hugetlb pages and other awkward cases are treated. Just skip it. Signed-off-by: Hugh Dickins Signed-off-by: Andi Kleen --- mm/memory-failure.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index e17ec3f1c63..e354b9f2f38 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -644,7 +645,7 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn, int i; int kill = 1; - if (PageReserved(p) || PageCompound(p) || PageSlab(p)) + if (PageReserved(p) || PageCompound(p) || PageSlab(p) || PageKsm(p)) return; /* -- GitLab From 5d5429af066b8896e903d829ac143711ed2c25f2 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Tue, 13 Oct 2009 15:03:59 +0100 Subject: [PATCH 0105/1165] HWPOISON: fix/proc/meminfo alignment Given such a long name, the kB count in /proc/meminfo's HardwareCorrupted line is being shown too far right (it does align with x86_64's VmallocChunk above, but I hope nobody will ever have that much corrupted!). Align it. Signed-off-by: Hugh Dickins Signed-off-by: Andi Kleen --- fs/proc/meminfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c index c7bff4f603f..a65239cfd97 100644 --- a/fs/proc/meminfo.c +++ b/fs/proc/meminfo.c @@ -99,7 +99,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v) "VmallocUsed: %8lu kB\n" "VmallocChunk: %8lu kB\n" #ifdef CONFIG_MEMORY_FAILURE - "HardwareCorrupted: %8lu kB\n" + "HardwareCorrupted: %5lu kB\n" #endif , K(i.totalram), -- GitLab From 65a64464349883891e21e74af16c05d6e1eeb4e9 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 14 Oct 2009 06:22:47 +0200 Subject: [PATCH 0106/1165] HWPOISON: Allow schedule_on_each_cpu() from keventd Right now when calling schedule_on_each_cpu() from keventd there is a deadlock because it tries to schedule a work item on the current CPU too. This happens via lru_add_drain_all() in hwpoison. Just call the function for the current CPU in this case. This is actually faster too. Debugging with Fengguang Wu & Max Asbock Signed-off-by: Andi Kleen --- kernel/workqueue.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index addfe2df93b..f61a2fecf28 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -667,21 +667,38 @@ EXPORT_SYMBOL(schedule_delayed_work_on); int schedule_on_each_cpu(work_func_t func) { int cpu; + int orig = -1; struct work_struct *works; works = alloc_percpu(struct work_struct); if (!works) return -ENOMEM; + /* + * when running in keventd don't schedule a work item on itself. + * Can just call directly because the work queue is already bound. + * This also is faster. + * Make this a generic parameter for other workqueues? + */ + if (current_is_keventd()) { + orig = raw_smp_processor_id(); + INIT_WORK(per_cpu_ptr(works, orig), func); + func(per_cpu_ptr(works, orig)); + } + get_online_cpus(); for_each_online_cpu(cpu) { struct work_struct *work = per_cpu_ptr(works, cpu); + if (cpu == orig) + continue; INIT_WORK(work, func); schedule_work_on(cpu, work); } - for_each_online_cpu(cpu) - flush_work(per_cpu_ptr(works, cpu)); + for_each_online_cpu(cpu) { + if (cpu != orig) + flush_work(per_cpu_ptr(works, cpu)); + } put_online_cpus(); free_percpu(works); return 0; -- GitLab From 7456b0405d8fc063c49628f969cdb23be060fc80 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Mon, 19 Oct 2009 08:15:01 +0200 Subject: [PATCH 0107/1165] HWPOISON: fix invalid page count in printk output The madvise injector already holds a reference when passing in a page to the memory-failure code. The code corrects for this additional reference for its checks, but the final printk output didn't. Fix that. Signed-off-by: Wu Fengguang Signed-off-by: Andi Kleen --- mm/memory-failure.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index e354b9f2f38..dacc6418387 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -613,13 +613,16 @@ static int page_action(struct page_state *ps, struct page *p, unsigned long pfn, int ref) { int result; + int count; result = ps->action(p, pfn); action_result(pfn, ps->msg, result); - if (page_count(p) != 1 + ref) + + count = page_count(p) - 1 - ref; + if (count != 0) printk(KERN_ERR "MCE %#lx: %s page still referenced by %d users\n", - pfn, ps->msg, page_count(p) - 1); + pfn, ps->msg, count); /* Could do more checks here if page looks ok */ /* -- GitLab From dc79959aaf80e518741657a702fa2727c86c1189 Mon Sep 17 00:00:00 2001 From: Tim Blechmann Date: Sat, 17 Oct 2009 18:08:29 +0200 Subject: [PATCH 0108/1165] perf top: Fix --delay_secs 0 division by zero Add delay_secs sanity check to handle_keypress, this fixes a division by zero crash. Signed-off-by: Tim Blechmann Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Mike Galbraith Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker LKML-Reference: <4AD9EBFD.106@klingt.org> Signed-off-by: Ingo Molnar --- tools/perf/builtin-top.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 37512e93623..a1b1d10912d 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -686,6 +686,8 @@ static void handle_keypress(int c) switch (c) { case 'd': prompt_integer(&delay_secs, "Enter display delay"); + if (delay_secs < 1) + delay_secs = 1; break; case 'e': prompt_integer(&print_entries, "Enter display entries (lines)"); -- GitLab From 02a06d3042e208cb74369838b178ca9512192be4 Mon Sep 17 00:00:00 2001 From: Barry Song <21cnbao@gmail.com> Date: Fri, 16 Oct 2009 18:13:38 +0800 Subject: [PATCH 0109/1165] ASoC: Fix possible codec_dai->ops NULL pointer problems Some codec DAIs like stac9766, wm9712, wm9713, ad1980 don't register themselves then it loses to the chance to be given a null_dai_ops in snd_soc_register_dai if they have no ops. When functions like soc_pcm_open, soc_pcm_hw_params etc. access the ops field in these DAIs, panic will happen. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 7ff04ad2a97..0a1b2f64bbe 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -834,6 +834,9 @@ EXPORT_SYMBOL_GPL(snd_soc_resume_device); #define soc_resume NULL #endif +static struct snd_soc_dai_ops null_dai_ops = { +}; + static void snd_soc_instantiate_card(struct snd_soc_card *card) { struct platform_device *pdev = container_of(card->dev, @@ -877,6 +880,11 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card) ac97 = 1; } + for (i = 0; i < card->num_links; i++) { + if (!card->dai_link[i].codec_dai->ops) + card->dai_link[i].codec_dai->ops = &null_dai_ops; + } + /* If we have AC97 in the system then don't wait for the * codec. This will need revisiting if we have to handle * systems with mixed AC97 and non-AC97 parts. Only check for @@ -2329,9 +2337,6 @@ static int snd_soc_unregister_card(struct snd_soc_card *card) return 0; } -static struct snd_soc_dai_ops null_dai_ops = { -}; - /** * snd_soc_register_dai - Register a DAI with the ASoC core * -- GitLab From c038e51e841581cc3fb9a76e5e16331331e9c85c Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 19 Oct 2009 15:43:48 +0800 Subject: [PATCH 0110/1165] drm/i915: fix to setup display reference clock control on Ironlake For new stepping of PCH, the display reference clock is fully under driver's control. This one trys to setup all needed reference clock for different outputs. Older stepping of PCH chipset should be ignoring this. This fixes output failure issue on newer PCH which requires driver to take control of reference clock enabling. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 4 +-- drivers/gpu/drm/i915/intel_display.c | 40 ++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b4813586d92..cd0ffa015c2 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2158,11 +2158,11 @@ #define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13) #define DREF_SSC_SOURCE_DISABLE (0<<11) #define DREF_SSC_SOURCE_ENABLE (2<<11) -#define DREF_SSC_SOURCE_MASK (2<<11) +#define DREF_SSC_SOURCE_MASK (3<<11) #define DREF_NONSPREAD_SOURCE_DISABLE (0<<9) #define DREF_NONSPREAD_CK505_ENABLE (1<<9) #define DREF_NONSPREAD_SOURCE_ENABLE (2<<9) -#define DREF_NONSPREAD_SOURCE_MASK (2<<9) +#define DREF_NONSPREAD_SOURCE_MASK (3<<9) #define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7) #define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7) #define DREF_SSC4_DOWNSPREAD (0<<6) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 123cce1ae47..db4c3870095 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2814,6 +2814,46 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, link_bw, &m_n); } + /* Ironlake: try to setup display ref clock before DPLL + * enabling. This is only under driver's control after + * PCH B stepping, previous chipset stepping should be + * ignoring this setting. + */ + if (IS_IGDNG(dev)) { + temp = I915_READ(PCH_DREF_CONTROL); + /* Always enable nonspread source */ + temp &= ~DREF_NONSPREAD_SOURCE_MASK; + temp |= DREF_NONSPREAD_SOURCE_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + temp &= ~DREF_SSC_SOURCE_MASK; + temp |= DREF_SSC_SOURCE_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + udelay(200); + + if (is_edp) { + if (dev_priv->lvds_use_ssc) { + temp |= DREF_SSC1_ENABLE; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + + udelay(200); + + temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; + temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + } else { + temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; + I915_WRITE(PCH_DREF_CONTROL, temp); + POSTING_READ(PCH_DREF_CONTROL); + } + } + } + if (IS_IGD(dev)) { fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) -- GitLab From b1f60b7029989da71fd8ea1b1176480fac9e846c Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 19 Oct 2009 15:43:49 +0800 Subject: [PATCH 0111/1165] drm/i915: fix panel fitting filter coefficient select for Ironlake Must set filter selection as hardcoded coefficients for medium 3x3 filtering, which matches vbios setting for Ironlake. This fixes display corrupt issue on HP arrandale with new vbios. Cc: Stable Team Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 5 +++++ drivers/gpu/drm/i915/intel_display.c | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index cd0ffa015c2..78f336e0083 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -2039,6 +2039,11 @@ #define PFA_CTL_1 0x68080 #define PFB_CTL_1 0x68880 #define PF_ENABLE (1<<31) +#define PF_FILTER_MASK (3<<23) +#define PF_FILTER_PROGRAMMED (0<<23) +#define PF_FILTER_MED_3x3 (1<<23) +#define PF_FILTER_EDGE_ENHANCE (2<<23) +#define PF_FILTER_EDGE_SOFTEN (3<<23) #define PFA_WIN_SZ 0x68074 #define PFB_WIN_SZ 0x68874 #define PFA_WIN_POS 0x68070 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index db4c3870095..e189fd6dedc 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1515,7 +1515,7 @@ static void igdng_crtc_dpms(struct drm_crtc *crtc, int mode) /* Enable panel fitting for LVDS */ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(pf_ctl_reg); - I915_WRITE(pf_ctl_reg, temp | PF_ENABLE); + I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3); /* currently full aspect */ I915_WRITE(pf_win_pos, 0); -- GitLab From d54e9d28241fd52cca3df4f6bc2054a30d453fed Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 19 Oct 2009 15:43:51 +0800 Subject: [PATCH 0112/1165] drm/i915: quiet DP i2c init Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index f4856a51047..d83447557f9 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -400,7 +400,7 @@ intel_dp_i2c_init(struct intel_output *intel_output, const char *name) { struct intel_dp_priv *dp_priv = intel_output->dev_priv; - DRM_ERROR("i2c_init %s\n", name); + DRM_DEBUG_KMS("i2c_init %s\n", name); dp_priv->algo.running = false; dp_priv->algo.address = 0; dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch; -- GitLab From 6629542e79255e0dbef8ec82eaf644e1b2546c3c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Oct 2009 18:09:32 -0700 Subject: [PATCH 0113/1165] md/raid6: kill a gcc-4.0.1 'uninitialized variable' warning Signed-off-by: Dan Williams --- drivers/md/raid5.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index dcd9e659ed9..81abefc172d 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -156,16 +156,16 @@ static inline int raid6_next_disk(int disk, int raid_disks) static int raid6_idx_to_slot(int idx, struct stripe_head *sh, int *count, int syndrome_disks) { - int slot; + int slot = *count; if (sh->ddf_layout) - slot = (*count)++; + (*count)++; if (idx == sh->pd_idx) return syndrome_disks; if (idx == sh->qd_idx) return syndrome_disks + 1; if (!sh->ddf_layout) - slot = (*count)++; + (*count)++; return slot; } -- GitLab From 5676470f06f783aebf545c8f17ca772911022068 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Oct 2009 18:09:32 -0700 Subject: [PATCH 0114/1165] async_pq: kill a stray dma_map() call and other cleanups - update the kernel doc for async_syndrome to indicate what NULL in the source list means - whitespace fixups Signed-off-by: Dan Williams --- crypto/async_tx/async_pq.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index 43b1436bd96..60476560e0b 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -181,10 +181,14 @@ do_sync_gen_syndrome(struct page **blocks, unsigned int offset, int disks, * blocks[disks-1] to NULL. When P or Q is omitted 'len' must be <= * PAGE_SIZE as a temporary buffer of this size is used in the * synchronous path. 'disks' always accounts for both destination - * buffers. + * buffers. If any source buffers (blocks[i] where i < disks - 2) are + * set to NULL those buffers will be replaced with the raid6_zero_page + * in the synchronous path and omitted in the hardware-asynchronous + * path. * * 'blocks' note: if submit->scribble is NULL then the contents of - * 'blocks' may be overridden + * 'blocks' may be overwritten to perform address conversions + * (dma_map_page() or page_address()). */ struct dma_async_tx_descriptor * async_gen_syndrome(struct page **blocks, unsigned int offset, int disks, @@ -283,13 +287,13 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, if (!P(blocks, disks)) dma_flags |= DMA_PREP_PQ_DISABLE_P; else - pq[0] = dma_map_page(dev, P(blocks,disks), + pq[0] = dma_map_page(dev, P(blocks, disks), offset, len, DMA_TO_DEVICE); if (!Q(blocks, disks)) dma_flags |= DMA_PREP_PQ_DISABLE_Q; else - pq[1] = dma_map_page(dev, Q(blocks,disks), + pq[1] = dma_map_page(dev, Q(blocks, disks), offset, len, DMA_TO_DEVICE); @@ -303,9 +307,6 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, coefs[src_cnt] = raid6_gfexp[i]; src_cnt++; } - pq[1] = dma_map_page(dev, Q(blocks,disks), - offset, len, - DMA_TO_DEVICE); for (;;) { tx = device->device_prep_dma_pq_val(chan, pq, dma_src, -- GitLab From 3bc2a39c69d423d5d1f0b3ef77960b1464c976a0 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 20 Oct 2009 06:46:49 +0900 Subject: [PATCH 0115/1165] perf timechart: Fix the wakeup-arrows that point to non-visible processes The timechart wakeup arrows currently show no process information when the waker/wakee are processes that are not actually chosen to be shown on the timechart. This patch fixes this oversight, by looking through all processes (after giving preference to visible processes) as well as falling back to just showing the PID if no name for the process can be resolved. Signed-off-by: Arjan van de Ven Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker LKML-Reference: <20091020064649.0e4959b2@infradead.org> Signed-off-by: Ingo Molnar --- tools/perf/builtin-timechart.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c index 702d8fe58fb..e8a510d935e 100644 --- a/tools/perf/builtin-timechart.c +++ b/tools/perf/builtin-timechart.c @@ -765,19 +765,40 @@ static void draw_wakeups(void) if (c->Y && c->start_time <= we->time && c->end_time >= we->time) { if (p->pid == we->waker) { from = c->Y; - task_from = c->comm; + task_from = strdup(c->comm); } if (p->pid == we->wakee) { to = c->Y; - task_to = c->comm; + task_to = strdup(c->comm); } } c = c->next; } + c = p->all; + while (c) { + if (p->pid == we->waker && !from) { + from = c->Y; + task_from = strdup(c->comm); + } + if (p->pid == we->wakee && !to) { + to = c->Y; + task_to = strdup(c->comm); + } + c = c->next; + } } p = p->next; } + if (!task_from) { + task_from = malloc(40); + sprintf(task_from, "[%i]", we->waker); + } + if (!task_to) { + task_to = malloc(40); + sprintf(task_to, "[%i]", we->wakee); + } + if (we->waker == -1) svg_interrupt(we->time, to); else if (from && to && abs(from - to) == 1) @@ -785,6 +806,9 @@ static void draw_wakeups(void) else svg_partial_wakeline(we->time, from, task_from, to, task_to); we = we->next; + + free(task_from); + free(task_to); } } -- GitLab From 2e600d01c131ee189f55ca1879cd364b9e056df8 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 20 Oct 2009 06:47:31 +0900 Subject: [PATCH 0116/1165] perf timechart: Improve the visual appearance of scheduler delays [from KS feedback] Currently, scheduler delays are shown in a mostly transparent, light yellow color. This color is rather hard to see on several screens, especially projectors. This patch changes the color of the scheduler delays to be a much more "hard" yellow that survived the kernel summit projector. Reported-by: Linus Torvalds Signed-off-by: Arjan van de Ven Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker LKML-Reference: <20091020064731.20ae126a@infradead.org> Signed-off-by: Ingo Molnar --- tools/perf/util/svghelper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/svghelper.c b/tools/perf/util/svghelper.c index 856655d8b0b..b3637db025a 100644 --- a/tools/perf/util/svghelper.c +++ b/tools/perf/util/svghelper.c @@ -103,7 +103,7 @@ void open_svg(const char *filename, int cpus, int rows, u64 start, u64 end) fprintf(svgfile, " rect.process2 { fill:rgb(180,180,180); fill-opacity:0.9; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.sample { fill:rgb( 0, 0,255); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.blocked { fill:rgb(255, 0, 0); fill-opacity:0.5; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); - fprintf(svgfile, " rect.waiting { fill:rgb(214,214, 0); fill-opacity:0.3; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); + fprintf(svgfile, " rect.waiting { fill:rgb(224,214, 0); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.WAITING { fill:rgb(255,214, 48); fill-opacity:0.6; stroke-width:0; stroke:rgb( 0, 0, 0); } \n"); fprintf(svgfile, " rect.cpu { fill:rgb(192,192,192); fill-opacity:0.2; stroke-width:0.5; stroke:rgb(128,128,128); } \n"); fprintf(svgfile, " rect.pstate { fill:rgb(128,128,128); fill-opacity:0.8; stroke-width:0; } \n"); -- GitLab From 030b07720be0f3bfada12ff6bfa3c61a91212f32 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Oct 2009 18:09:32 -0700 Subject: [PATCH 0117/1165] async_pq: rename scribble page The global scribble page is used as a temporary destination buffer when disabling the P or Q result is requested. The local scribble buffer contains memory for performing address conversions. Rename the global variable to avoid confusion. Signed-off-by: Dan Williams --- crypto/async_tx/async_pq.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index 60476560e0b..6b5cc4fba59 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -26,9 +26,10 @@ #include /** - * scribble - space to hold throwaway P buffer for synchronous gen_syndrome + * pq_scribble_page - space to hold throwaway P or Q buffer for + * synchronous gen_syndrome */ -static struct page *scribble; +static struct page *pq_scribble_page; /* the struct page *blocks[] parameter passed to async_gen_syndrome() * and async_syndrome_val() contains the 'P' destination address at @@ -226,11 +227,11 @@ async_gen_syndrome(struct page **blocks, unsigned int offset, int disks, async_tx_quiesce(&submit->depend_tx); if (!P(blocks, disks)) { - P(blocks, disks) = scribble; + P(blocks, disks) = pq_scribble_page; BUG_ON(len + offset > PAGE_SIZE); } if (!Q(blocks, disks)) { - Q(blocks, disks) = scribble; + Q(blocks, disks) = pq_scribble_page; BUG_ON(len + offset > PAGE_SIZE); } do_sync_gen_syndrome(blocks, offset, disks, len, submit); @@ -384,9 +385,9 @@ EXPORT_SYMBOL_GPL(async_syndrome_val); static int __init async_pq_init(void) { - scribble = alloc_page(GFP_KERNEL); + pq_scribble_page = alloc_page(GFP_KERNEL); - if (scribble) + if (pq_scribble_page) return 0; pr_err("%s: failed to allocate required spare page\n", __func__); @@ -396,7 +397,7 @@ static int __init async_pq_init(void) static void __exit async_pq_exit(void) { - put_page(scribble); + put_page(pq_scribble_page); } module_init(async_pq_init); -- GitLab From da17bf4306fd3a52e938b121df82a7baa10eb282 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 19 Oct 2009 14:05:12 -0700 Subject: [PATCH 0118/1165] async_tx: fix asynchronous raid6 recovery for ddf layouts The raid6 recovery code currently requires special handling of the 4-disk and 5-disk recovery scenarios for the native layout. Quoting from commit 0a82a623: In these situations the default N-disk algorithm will present 0-source or 1-source operations to dma devices. To cover for dma devices where the minimum source count is 2 we implement 4-disk and 5-disk handling in the recovery code. The ddf layout presents disks=6 and disks=7 to the recovery code in these situations. Instead of looking at the number of disks count the number of non-zero sources in the list and call the special case code when the number of non-failed sources is 0 or 1. [neilb@suse.de: replace 'ddf' flag with counting good sources] Signed-off-by: Dan Williams --- crypto/async_tx/async_raid6_recov.c | 86 +++++++++++++++++++---------- 1 file changed, 56 insertions(+), 30 deletions(-) diff --git a/crypto/async_tx/async_raid6_recov.c b/crypto/async_tx/async_raid6_recov.c index 8e30b6ed078..943f2abac9b 100644 --- a/crypto/async_tx/async_raid6_recov.c +++ b/crypto/async_tx/async_raid6_recov.c @@ -131,8 +131,8 @@ async_mult(struct page *dest, struct page *src, u8 coef, size_t len, } static struct dma_async_tx_descriptor * -__2data_recov_4(size_t bytes, int faila, int failb, struct page **blocks, - struct async_submit_ctl *submit) +__2data_recov_4(int disks, size_t bytes, int faila, int failb, + struct page **blocks, struct async_submit_ctl *submit) { struct dma_async_tx_descriptor *tx = NULL; struct page *p, *q, *a, *b; @@ -143,8 +143,8 @@ __2data_recov_4(size_t bytes, int faila, int failb, struct page **blocks, void *cb_param = submit->cb_param; void *scribble = submit->scribble; - p = blocks[4-2]; - q = blocks[4-1]; + p = blocks[disks-2]; + q = blocks[disks-1]; a = blocks[faila]; b = blocks[failb]; @@ -170,8 +170,8 @@ __2data_recov_4(size_t bytes, int faila, int failb, struct page **blocks, } static struct dma_async_tx_descriptor * -__2data_recov_5(size_t bytes, int faila, int failb, struct page **blocks, - struct async_submit_ctl *submit) +__2data_recov_5(int disks, size_t bytes, int faila, int failb, + struct page **blocks, struct async_submit_ctl *submit) { struct dma_async_tx_descriptor *tx = NULL; struct page *p, *q, *g, *dp, *dq; @@ -181,21 +181,22 @@ __2data_recov_5(size_t bytes, int faila, int failb, struct page **blocks, dma_async_tx_callback cb_fn = submit->cb_fn; void *cb_param = submit->cb_param; void *scribble = submit->scribble; - int uninitialized_var(good); - int i; + int good_srcs, good, i; - for (i = 0; i < 3; i++) { + good_srcs = 0; + good = -1; + for (i = 0; i < disks-2; i++) { + if (blocks[i] == NULL) + continue; if (i == faila || i == failb) continue; - else { - good = i; - break; - } + good = i; + good_srcs++; } - BUG_ON(i >= 3); + BUG_ON(good_srcs > 1); - p = blocks[5-2]; - q = blocks[5-1]; + p = blocks[disks-2]; + q = blocks[disks-1]; g = blocks[good]; /* Compute syndrome with zero for the missing data pages @@ -323,6 +324,8 @@ struct dma_async_tx_descriptor * async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, struct page **blocks, struct async_submit_ctl *submit) { + int non_zero_srcs, i; + BUG_ON(faila == failb); if (failb < faila) swap(faila, failb); @@ -334,12 +337,11 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, */ if (!submit->scribble) { void **ptrs = (void **) blocks; - int i; async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) if (blocks[i] == NULL) - ptrs[i] = (void*)raid6_empty_zero_page; + ptrs[i] = (void *) raid6_empty_zero_page; else ptrs[i] = page_address(blocks[i]); @@ -350,19 +352,30 @@ async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb, return NULL; } - switch (disks) { - case 4: + non_zero_srcs = 0; + for (i = 0; i < disks-2 && non_zero_srcs < 4; i++) + if (blocks[i]) + non_zero_srcs++; + switch (non_zero_srcs) { + case 0: + case 1: + /* There must be at least 2 sources - the failed devices. */ + BUG(); + + case 2: /* dma devices do not uniformly understand a zero source pq * operation (in contrast to the synchronous case), so - * explicitly handle the 4 disk special case + * explicitly handle the special case of a 4 disk array with + * both data disks missing. */ - return __2data_recov_4(bytes, faila, failb, blocks, submit); - case 5: + return __2data_recov_4(disks, bytes, faila, failb, blocks, submit); + case 3: /* dma devices do not uniformly understand a single * source pq operation (in contrast to the synchronous - * case), so explicitly handle the 5 disk special case + * case), so explicitly handle the special case of a 5 disk + * array with 2 of 3 data disks missing. */ - return __2data_recov_5(bytes, faila, failb, blocks, submit); + return __2data_recov_5(disks, bytes, faila, failb, blocks, submit); default: return __2data_recov_n(disks, bytes, faila, failb, blocks, submit); } @@ -388,6 +401,7 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, dma_async_tx_callback cb_fn = submit->cb_fn; void *cb_param = submit->cb_param; void *scribble = submit->scribble; + int good_srcs, good, i; struct page *srcs[2]; pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes); @@ -397,7 +411,6 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, */ if (!scribble) { void **ptrs = (void **) blocks; - int i; async_tx_quiesce(&submit->depend_tx); for (i = 0; i < disks; i++) @@ -413,6 +426,20 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, return NULL; } + good_srcs = 0; + good = -1; + for (i = 0; i < disks-2; i++) { + if (i == faila) + continue; + if (blocks[i]) { + good = i; + good_srcs++; + if (good_srcs > 1) + break; + } + } + BUG_ON(good_srcs == 0); + p = blocks[disks-2]; q = blocks[disks-1]; @@ -423,11 +450,10 @@ async_raid6_datap_recov(int disks, size_t bytes, int faila, blocks[faila] = NULL; blocks[disks-1] = dq; - /* in the 4 disk case we only need to perform a single source - * multiplication + /* in the 4-disk case we only need to perform a single source + * multiplication with the one good data block. */ - if (disks == 4) { - int good = faila == 0 ? 1 : 0; + if (good_srcs == 1) { struct page *g = blocks[good]; init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, -- GitLab From 2eadaad67b2b6bd132eda105128d2d466298b8e3 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Wed, 30 Sep 2009 10:01:28 +0300 Subject: [PATCH 0119/1165] UBI: fix backward compatibility Commit 32bc4820287a1a03982979515949e8ea56eac641 did not fully fix the backward compatibility issues. We still fail to properly handle situations when the first PEB contains non-zero image sequence number, but one of the following PEBs contains zero image sequence number. For example, this may happen if we mount a new image with an old kernel, and then try to mount it in the new kernel. This patch should fix the issue. Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/scan.c | 7 +++---- drivers/mtd/ubi/scan.h | 2 -- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c index e7161adc419..90af61a2c3e 100644 --- a/drivers/mtd/ubi/scan.c +++ b/drivers/mtd/ubi/scan.c @@ -794,16 +794,15 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si, * number. */ image_seq = be32_to_cpu(ech->image_seq); - if (!si->image_seq_set) { + if (!ubi->image_seq && image_seq) ubi->image_seq = image_seq; - si->image_seq_set = 1; - } else if (ubi->image_seq && ubi->image_seq != image_seq) { + if (ubi->image_seq && image_seq && + ubi->image_seq != image_seq) { ubi_err("bad image sequence number %d in PEB %d, " "expected %d", image_seq, pnum, ubi->image_seq); ubi_dbg_dump_ec_hdr(ech); return -EINVAL; } - } /* OK, we've done with the EC header, let's look at the VID header */ diff --git a/drivers/mtd/ubi/scan.h b/drivers/mtd/ubi/scan.h index bab31695dac..ff179ad7ca5 100644 --- a/drivers/mtd/ubi/scan.h +++ b/drivers/mtd/ubi/scan.h @@ -103,7 +103,6 @@ struct ubi_scan_volume { * @ec_sum: a temporary variable used when calculating @mean_ec * @ec_count: a temporary variable used when calculating @mean_ec * @corr_count: count of corrupted PEBs - * @image_seq_set: indicates @ubi->image_seq is known * * This data structure contains the result of scanning and may be used by other * UBI sub-systems to build final UBI data structures, further error-recovery @@ -127,7 +126,6 @@ struct ubi_scan_info { uint64_t ec_sum; int ec_count; int corr_count; - int image_seq_set; }; struct ubi_device; -- GitLab From 774b1382106529ad963d011931c1b911db05be68 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 16 Oct 2009 14:00:17 +0200 Subject: [PATCH 0120/1165] UBI: fix check on unsigned long result is unsigned, the wrong check was used. Signed-off-by: Roel Kluin Signed-off-by: Artem Bityutskiy --- drivers/mtd/ubi/build.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/ubi/build.c b/drivers/mtd/ubi/build.c index e1f7d0a78b9..14cec04c34f 100644 --- a/drivers/mtd/ubi/build.c +++ b/drivers/mtd/ubi/build.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "ubi.h" /* Maximum length of the 'mtd=' parameter */ @@ -1257,7 +1258,7 @@ static int __init bytes_str_to_int(const char *str) unsigned long result; result = simple_strtoul(str, &endp, 0); - if (str == endp || result < 0) { + if (str == endp || result >= INT_MAX) { printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n", str); return -EINVAL; -- GitLab From 5f784336dc02a1c5be3dffac3506bc07c1604cee Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 19 Oct 2009 11:42:13 +0200 Subject: [PATCH 0121/1165] pcmcia: Fix possible printk format warnings Fix more possible warnings introduced by my commit 1d80766554322236aee50d6023693b3210b9cf38 as fixed by the previous patch from Randy Dunlap. Not tested due to no hardware. Signed-off-by: Wolfram Sang Signed-off-by: Dominik Brodowski --- drivers/pcmcia/m32r_cfc.c | 10 ++++++---- drivers/pcmcia/m32r_pcc.c | 10 ++++++---- drivers/pcmcia/m8xx_pcmcia.c | 15 +++++++++------ drivers/pcmcia/soc_common.c | 5 +++-- 4 files changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index d1d89c4491a..7dfbee1dcd7 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -537,8 +537,9 @@ static int _pcc_set_io_map(u_short sock, struct pccard_io_map *io) u_char map; debug(3, "m32r_cfc: SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#lx-%#lx)\n", sock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", sock, io->map, io->flags, + io->speed, (unsigned long long)io->start, + (unsigned long long)io->stop); map = io->map; return 0; @@ -554,8 +555,9 @@ static int _pcc_set_mem_map(u_short sock, struct pccard_mem_map *mem) pcc_socket_t *t = &socket[sock]; debug(3, "m32r_cfc: SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#lx, %#x)\n", sock, map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#llx, %#x)\n", sock, map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); /* * sanity check diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index a0655839c8d..c6524f99ccc 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -492,8 +492,9 @@ static int _pcc_set_io_map(u_short sock, struct pccard_io_map *io) u_char map; debug(3, "m32r-pcc: SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#x-%#x)\n", sock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#llx-%#llx)\n", sock, io->map, io->flags, + io->speed, (unsigned long long)io->start, + (unsigned long long)io->stop); map = io->map; return 0; @@ -515,8 +516,9 @@ static int _pcc_set_mem_map(u_short sock, struct pccard_mem_map *mem) #endif debug(3, "m32r-pcc: SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#lx, %#x)\n", sock, map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#llx, %#x)\n", sock, map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); /* * sanity check diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index c69f2c4fe52..403559ba49d 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -975,8 +975,9 @@ static int m8xx_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) #define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start) dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, " - "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags, - io->speed, io->start, io->stop); + "%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags, + io->speed, (unsigned long long)io->start, + (unsigned long long)io->stop); if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff) || (io->stop > 0xffff) || (io->stop < io->start)) @@ -1055,8 +1056,9 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, pcmconf8xx_t *pcmcia = s->pcmcia; dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); if ((mem->map >= PCMCIA_MEM_WIN_NO) // || ((mem->s) >= PCMCIA_MEM_WIN_SIZE) @@ -1107,8 +1109,9 @@ static int m8xx_set_mem_map(struct pcmcia_socket *sock, } dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, " - "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags, - mem->speed, mem->static_start, mem->card_start); + "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags, + mem->speed, (unsigned long long)mem->static_start, + mem->card_start); /* copy the struct and modify the copy */ diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 163cf98e238..ef7e9e58782 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -336,8 +336,9 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); unsigned short speed = map->speed; - debug(skt, 2, "map %u speed %u start 0x%08x stop 0x%08x\n", - map->map, map->speed, map->start, map->stop); + debug(skt, 2, "map %u speed %u start 0x%08llx stop 0x%08llx\n", + map->map, map->speed, (unsigned long long)map->start, + (unsigned long long)map->stop); debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n", (map->flags==0)?"":"", (map->flags&MAP_ACTIVE)?"ACTIVE ":"", -- GitLab From 02dd0a0613e0d84c7dd8315e3fe6204d005b7c79 Mon Sep 17 00:00:00 2001 From: Robin Holt Date: Tue, 20 Oct 2009 14:36:15 -0500 Subject: [PATCH 0122/1165] x86, UV: Set DELIVERY_MODE=4 for vector=NMI_VECTOR in uv_hub_send_ipi() When sending a NMI_VECTOR IPI using the UV_HUB_IPI_INT register, we need to ensure the delivery mode field of that register has NMI delivery selected. This makes those IPIs true NMIs, instead of flat IPIs. It matters to reboot sequences and KGDB, both of which use NMI IPIs. Signed-off-by: Robin Holt Acked-by: Jack Steiner Cc: Martin Hicks Cc: LKML-Reference: <20091020193620.877322000@alcatraz.americas.sgi.com> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uv/uv_hub.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 94908a08020..d1414af9855 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -19,6 +19,8 @@ #include #include #include +#include +#include /* @@ -435,9 +437,14 @@ static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value) static inline void uv_hub_send_ipi(int pnode, int apicid, int vector) { unsigned long val; + unsigned long dmode = dest_Fixed; + + if (vector == NMI_VECTOR) + dmode = dest_NMI; val = (1UL << UVH_IPI_INT_SEND_SHFT) | ((apicid) << UVH_IPI_INT_APIC_ID_SHFT) | + (dmode << UVH_IPI_INT_DELIVERY_MODE_SHFT) | (vector << UVH_IPI_INT_VECTOR_SHFT); uv_write_global_mmr64(pnode, UVH_IPI_INT, val); } -- GitLab From 4726374fb4cc93472b83765ef786d8093e352afa Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Tue, 20 Oct 2009 08:39:41 +0100 Subject: [PATCH 0123/1165] ARM: 5766/1: Fix watchdog enabling for AT91SAM9G45 The macro for the watchdog has been changed from CONFIG_AT91SAM9_WATCHDOG to CONFIG_AT91SAM9X_WATCHDOG due to AT91CAP9 chips support Signed-off-by: Yegor Yefremov Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-at91/at91sam9g45_devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index d581cff80c4..332b784050b 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -838,7 +838,7 @@ static void __init at91_add_device_rtt(void) * Watchdog * -------------------------------------------------------------------- */ -#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE) +#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) static struct platform_device at91sam9g45_wdt_device = { .name = "at91_wdt", .id = -1, -- GitLab From faff8032ec96e575525cf85690c914f75dd77fc5 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 19 Oct 2009 21:29:28 +0100 Subject: [PATCH 0124/1165] ARM: 5765/1: Updated U300 defconfig This updates the U300 to use all the drivers merged in during the 2.6.32 merge window. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/configs/u300_defconfig | 94 +++++++++++++++++++++++---------- 1 file changed, 66 insertions(+), 28 deletions(-) diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig index 7d61ae6e75d..953ba0297fc 100644 --- a/arch/arm/configs/u300_defconfig +++ b/arch/arm/configs/u300_defconfig @@ -1,14 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc3 -# Thu Jul 16 23:36:10 2009 +# Linux kernel version: 2.6.32-rc5 +# Sat Oct 17 23:32:24 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_HAVE_TCM=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -80,17 +81,15 @@ CONFIG_SHMEM=y # CONFIG_AIO is not set # -# Performance Counters +# Kernel Performance Events And Counters # # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set CONFIG_ARCH_U300=y # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_BCMRING is not set # # ST-Ericsson AB U300/U330/U335/U365 Platform @@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y CONFIG_MACH_U300_DUAL_RAM=y CONFIG_U300_DEBUG=y # CONFIG_MACH_U300_SEMI_IS_SHARED is not set +CONFIG_MACH_U300_SPIDUMMY=y # # All the settings below must match the bootloader's settings @@ -207,7 +211,7 @@ CONFIG_CPU_32=y CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y @@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 CONFIG_COMMON_CLKDEV=y @@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set @@ -313,6 +321,7 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y @@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y # # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_NETDEVICES is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6387XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set CONFIG_AB3100_CORE=y +CONFIG_AB3100_OTP=y # CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_LP3971 is not set +CONFIG_REGULATOR_AB3100=y +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_ARMMMCI=y # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_HCTOSYS is not set # CONFIG_RTC_DEBUG is not set # @@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set +CONFIG_RTC_DRV_AB3100=y # # on-CPU RTC drivers # # CONFIG_RTC_DRV_PL030 is not set # CONFIG_RTC_DRV_PL031 is not set +CONFIG_RTC_DRV_COH901331=y CONFIG_DMADEVICES=y # # DMA Devices # # CONFIG_AUXDISPLAY is not set -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_LP3971 is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -913,6 +947,7 @@ CONFIG_REGULATOR=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC32 is not set # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- GitLab From fb78b11fc2c3743d9a67a226cae8afd06c74d562 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Wed, 21 Oct 2009 02:17:22 +0100 Subject: [PATCH 0125/1165] ARM: 5767/1: ep93xx: remove ep93xx_init_time() prototype Remove unused prototype for ep93xx_init_time(). This function is not defined in the kernel. Signed-off-by: H Hartley Sweeten Acked-by: Ryan Mallon Signed-off-by: Russell King --- arch/arm/mach-ep93xx/include/mach/platform.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index a3ec33fd79d..469fd968d51 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -17,7 +17,6 @@ struct ep93xx_eth_data void ep93xx_map_io(void); void ep93xx_init_irq(void); -void ep93xx_init_time(unsigned long); /* EP93xx System Controller software locked register write */ void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg); -- GitLab From f248dc626e95a2b61fed3631df49aef23f1736b8 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Wed, 21 Oct 2009 02:21:20 +0100 Subject: [PATCH 0126/1165] ARM: 5768/1: ep93xx: remove dead code in ep93xx_gpio_ab_irq_handler() Remove unnecessary code in ep93xx_gpio_ab_irq_handler(). The desc calculation for gpio port B was left in when the following commit was merged. commit d8aa0251f12546e9bd1e9ee1d9782d6492819a04 Author: Dmitry Baryshkov Date: Thu Oct 9 13:36:24 2008 +0100 [ARM] 5298/1: Drop desc_handle_irq() It's not needed so remove it. Signed-off-by: H Hartley Sweeten Acked-by: Ryan Mallon Signed-off-by: Russell King --- arch/arm/mach-ep93xx/core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index f95dc160c34..b4357c388d2 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -206,7 +206,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) for (i = 0; i < 8; i++) { if (status & (1 << i)) { int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; - desc = irq_desc + gpio_irq; generic_handle_irq(gpio_irq); } } -- GitLab From c768e67625688517c23f46b31a46e1f7d2de1c71 Mon Sep 17 00:00:00 2001 From: Hartley Sweeten Date: Wed, 21 Oct 2009 02:27:01 +0100 Subject: [PATCH 0127/1165] ARM: 5769/1: CPU_ARM920T: remove dead Maverick EP9312 URL Remove the URL listed for Maverick EP9312 since it is not available and modify the help text appropriately. Signed-off-by: H Hartley Sweeten Acked-by: Ryan Mallon Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index e993140edd8..9264d814cd7 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -122,10 +122,7 @@ config CPU_ARM920T select CPU_TLB_V4WBI if MMU help The ARM920T is licensed to be produced by numerous vendors, - and is used in the Maverick EP9312 and the Samsung S3C2410. - - More information on the Maverick EP9312 at - . + and is used in the Cirrus EP93xx and the Samsung S3C2410. Say Y if you want support for the ARM920T processor. Otherwise, say N. -- GitLab From 0996391139f43d032335b5360db11da62a2cbb39 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 21 Oct 2009 13:20:32 +0100 Subject: [PATCH 0128/1165] ARM: Fix lubbock defconfig build drivers/built-in.o: In function `pxa25x_udc_probe': drivers/usb/gadget/pxa25x_udc.c:2195: undefined reference to `otg_get_transceiver' drivers/usb/gadget/pxa25x_udc.c:2300: undefined reference to `otg_put_transceiver' pxa25x_udc.c unconditionally uses these two functions, so we need to ensure that the object providing them is also built. Signed-off-by: Russell King --- drivers/usb/gadget/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 33351312327..a18e3c5dd82 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -223,6 +223,7 @@ config USB_OTG config USB_GADGET_PXA25X boolean "PXA 25x or IXP 4xx" depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX + select USB_OTG_UTILS help Intel's PXA 25x series XScale ARM-5TE processors include an integrated full speed USB 1.1 device controller. The -- GitLab From d10c0858f618c20547d4eda8aee9c3afd91599cf Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 13 Oct 2009 10:44:07 +0200 Subject: [PATCH 0129/1165] [SCSI] zfcp: fix kfree handling in zfcp_init_device_setup The pointer that is allocated with kmalloc() is passed to strsep() which modifies it. Later on the modified pointer value will be passed to kfree. Save the original pointer and pass that one to kfree instead. Signed-off-by: Heiko Carstens Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_aux.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c index 0f79f3af4f5..2889e5f2dfd 100644 --- a/drivers/s390/scsi/zfcp_aux.c +++ b/drivers/s390/scsi/zfcp_aux.c @@ -128,12 +128,13 @@ out_ccwdev: static void __init zfcp_init_device_setup(char *devstr) { char *token; - char *str; + char *str, *str_saved; char busid[ZFCP_BUS_ID_SIZE]; u64 wwpn, lun; /* duplicate devstr and keep the original for sysfs presentation*/ - str = kmalloc(strlen(devstr) + 1, GFP_KERNEL); + str_saved = kmalloc(strlen(devstr) + 1, GFP_KERNEL); + str = str_saved; if (!str) return; @@ -152,12 +153,12 @@ static void __init zfcp_init_device_setup(char *devstr) if (!token || strict_strtoull(token, 0, (unsigned long long *) &lun)) goto err_out; - kfree(str); + kfree(str_saved); zfcp_init_device_configure(busid, wwpn, lun); return; - err_out: - kfree(str); +err_out: + kfree(str_saved); pr_err("%s is not a valid SCSI device\n", devstr); } -- GitLab From 934aeb587bab3173b6dec8e7717b909d8efc77b0 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Wed, 14 Oct 2009 11:00:43 +0200 Subject: [PATCH 0130/1165] [SCSI] zfcp: Handle WWPN mismatch in PLOGI payload For ports, zfcp gets the DID from the FC nameserver and tries to open the port. If the open succeeds, zfcp compares the WWPN from the nameserver with the WWPN in the PLOGI payload. In case of a mismatch, zfcp assumes that the DID of the port just changed and we opened the wrong port. This means that zfcp has to forget the DID, lookup the DID again and retry. This error case had a problem that zfcp forgets the DID, but never looks up a new one, stalling the ERP in this case. Fix this by triggering the DID lookup and properly exit from the ERP. The DID lookup will trigger a new ERP action. Also ensure when trying to open the port again with the new DID, first close the open port, even in the NOESC case. Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_erp.c | 22 ++++++++++------------ drivers/s390/scsi/zfcp_ext.h | 1 + drivers/s390/scsi/zfcp_fc.c | 11 +++++++++++ 3 files changed, 22 insertions(+), 12 deletions(-) diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index 73d366ba31e..f73e2180f33 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -858,10 +858,7 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act) if (fc_host_port_type(adapter->scsi_host) == FC_PORTTYPE_PTP) return zfcp_erp_open_ptp_port(act); if (!port->d_id) { - zfcp_port_get(port); - if (!queue_work(adapter->work_queue, - &port->gid_pn_work)) - zfcp_port_put(port); + zfcp_fc_trigger_did_lookup(port); return ZFCP_ERP_EXIT; } return zfcp_erp_port_strategy_open_port(act); @@ -869,12 +866,11 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act) case ZFCP_ERP_STEP_PORT_OPENING: /* D_ID might have changed during open */ if (p_status & ZFCP_STATUS_COMMON_OPEN) { - if (port->d_id) - return ZFCP_ERP_SUCCEEDED; - else { - act->step = ZFCP_ERP_STEP_PORT_CLOSING; - return ZFCP_ERP_CONTINUES; + if (!port->d_id) { + zfcp_fc_trigger_did_lookup(port); + return ZFCP_ERP_EXIT; } + return ZFCP_ERP_SUCCEEDED; } if (port->d_id && !(p_status & ZFCP_STATUS_COMMON_NOESC)) { port->d_id = 0; @@ -889,19 +885,21 @@ static int zfcp_erp_port_strategy_open_common(struct zfcp_erp_action *act) static int zfcp_erp_port_strategy(struct zfcp_erp_action *erp_action) { struct zfcp_port *port = erp_action->port; + int p_status = atomic_read(&port->status); - if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC) + if ((p_status & ZFCP_STATUS_COMMON_NOESC) && + !(p_status & ZFCP_STATUS_COMMON_OPEN)) goto close_init_done; switch (erp_action->step) { case ZFCP_ERP_STEP_UNINITIALIZED: zfcp_erp_port_strategy_clearstati(port); - if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN) + if (p_status & ZFCP_STATUS_COMMON_OPEN) return zfcp_erp_port_strategy_close(erp_action); break; case ZFCP_ERP_STEP_PORT_CLOSING: - if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN) + if (p_status & ZFCP_STATUS_COMMON_OPEN) return ZFCP_ERP_FAILED; break; } diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h index 629edec7040..b3f28deb450 100644 --- a/drivers/s390/scsi/zfcp_ext.h +++ b/drivers/s390/scsi/zfcp_ext.h @@ -96,6 +96,7 @@ extern int zfcp_fc_scan_ports(struct zfcp_adapter *); extern void _zfcp_fc_scan_ports_later(struct work_struct *); extern void zfcp_fc_incoming_els(struct zfcp_fsf_req *); extern void zfcp_fc_port_did_lookup(struct work_struct *); +extern void zfcp_fc_trigger_did_lookup(struct zfcp_port *); extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *); extern void zfcp_fc_test_link(struct zfcp_port *); extern void zfcp_fc_link_test_work(struct work_struct *); diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c index 722f22de875..df23bcead23 100644 --- a/drivers/s390/scsi/zfcp_fc.c +++ b/drivers/s390/scsi/zfcp_fc.c @@ -360,6 +360,17 @@ out: zfcp_port_put(port); } +/** + * zfcp_fc_trigger_did_lookup - trigger the d_id lookup using a GID_PN request + * @port: The zfcp_port to lookup the d_id for. + */ +void zfcp_fc_trigger_did_lookup(struct zfcp_port *port) +{ + zfcp_port_get(port); + if (!queue_work(port->adapter->work_queue, &port->gid_pn_work)) + zfcp_port_put(port); +} + /** * zfcp_fc_plogi_evaluate - evaluate PLOGI playload * @port: zfcp_port structure -- GitLab From 10d00f78e67223ef429fa5f4abfc9ea4ad740490 Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 13 Oct 2009 10:44:09 +0200 Subject: [PATCH 0131/1165] [SCSI] zfcp: Warn about storage devices with broken PLOGI data After opening a remote port zfcp checks if the WWPN returned in the PLOGI maches the WWPN of the port that should have been opened. On a mismatch zfcp assumes that the DID just changed, queries the FC nameserver and tries again. If the situation persists the erp will give up. With this strategy, if the remote port always returns the wrong PLOGI data, the remote port will not be opened. Introduce a warning, so that the system administrator knows why the remote port is not being opened and to have a pointer to investigate the problem on the storage system. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 38a7e4a6b63..5126461d846 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1475,9 +1475,16 @@ static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req) plogi = (struct fsf_plogi *) req->qtcb->bottom.support.els; if (req->qtcb->bottom.support.els1_length >= FSF_PLOGI_MIN_LEN) { - if (plogi->serv_param.wwpn != port->wwpn) + if (plogi->serv_param.wwpn != port->wwpn) { port->d_id = 0; - else { + dev_warn(&port->adapter->ccw_device->dev, + "A port opened with WWPN 0x%016Lx " + "returned data that identifies it as " + "WWPN 0x%016Lx\n", + (unsigned long long) port->wwpn, + (unsigned long long) + plogi->serv_param.wwpn); + } else { port->wwnn = plogi->serv_param.wwnn; zfcp_fc_plogi_evaluate(port, plogi); } -- GitLab From 9d38500de156fb28ffa8741acb90c4dc90a9fb4b Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 13 Oct 2009 10:44:10 +0200 Subject: [PATCH 0132/1165] [SCSI] zfcp: Fix timer initialization for ct and els requests Add HZ since the start_timer function expects jiffies, not seconds. Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_fsf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c index 5126461d846..4e41baa0c14 100644 --- a/drivers/s390/scsi/zfcp_fsf.c +++ b/drivers/s390/scsi/zfcp_fsf.c @@ -1079,7 +1079,7 @@ static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req, /* common settings for ct/gs and els requests */ req->qtcb->bottom.support.service_class = FSF_CLASS_3; req->qtcb->bottom.support.timeout = 2 * R_A_TOV; - zfcp_fsf_start_timer(req, 2 * R_A_TOV + 10); + zfcp_fsf_start_timer(req, (2 * R_A_TOV + 10) * HZ); return 0; } -- GitLab From 9e820afd0c4f3c8e8894aa91f5671fd7d11a787b Mon Sep 17 00:00:00 2001 From: Christof Schmitt Date: Tue, 13 Oct 2009 10:44:11 +0200 Subject: [PATCH 0133/1165] [SCSI] zfcp: Flush SCSI registration work when adding unit When configuring a LUN for use in zfcp, flush the SCSI work to ensure the SCSI device has been created before returning. This means that a configuration procedure can run these commands in a script and the SCSI device is available immediately after the unit_add: echo 1 > /sys/bus/ccw/drivers/zfcp/0.0.181d/online echo 0x401040C300000000 > \ /sys/bus/ccw/drivers/zfcp/0.0.181d/0x500507630313c562/unit_add lsscsi Reviewed-by: Swen Schillig Signed-off-by: Christof Schmitt Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_sysfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c index 079a8cf518a..d31000886ca 100644 --- a/drivers/s390/scsi/zfcp_sysfs.c +++ b/drivers/s390/scsi/zfcp_sysfs.c @@ -224,6 +224,7 @@ static ssize_t zfcp_sysfs_unit_add_store(struct device *dev, zfcp_erp_unit_reopen(unit, 0, "syuas_1", NULL); zfcp_erp_wait(unit->port->adapter); + flush_work(&unit->scsi_work); zfcp_unit_put(unit); out: mutex_unlock(&zfcp_data.config_mutex); -- GitLab From e57130698fe3dd2b7d617d90bbf86474473cb40c Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Tue, 20 Oct 2009 14:36:49 -0700 Subject: [PATCH 0134/1165] Input: atkbd - add a quirk for OQO 01+ multimedia keys OQO 01+ multimedia keys produce 6x on press, e0 6x upon release. As a result, Linux thinks that another key has been pressed (or is repeating), when it is actually a release of the same key. Mangle the release scancode when running on OQO so that driver recognizes it as such. Since the device does not have external PS/2 ports mangling is safe since there is no chance that an external keyboard is connected. Signed-off-by: Jamie Lentin Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 36 ++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 271c0b7045c..e9acbe0c9e2 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -233,6 +233,7 @@ struct atkbd { */ static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); static void *atkbd_platform_fixup_data; +static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int); static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)); @@ -393,6 +394,9 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, input_event(dev, EV_MSC, MSC_RAW, code); + if (atkbd_platform_scancode_fixup) + code = atkbd_platform_scancode_fixup(atkbd, code); + if (atkbd->translated) { if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) { @@ -922,6 +926,22 @@ static unsigned int atkbd_volume_forced_release_keys[] = { 0xae, 0xb0, -1U }; +/* + * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas + * they should be generating e4-e6 (0x80 | code). + */ +static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd, + unsigned int code) +{ + if (atkbd->translated && atkbd->emul == 1 && + (code == 0x64 || code == 0x65 || code == 0x66)) { + atkbd->emul = 0; + code |= 0x80; + } + + return code; +} + /* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set @@ -1527,6 +1547,13 @@ static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) return 0; } +static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) +{ + atkbd_platform_scancode_fixup = id->driver_data; + + return 0; +} + static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { { .ident = "Dell Laptop", @@ -1663,6 +1690,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkdb_soltech_ta12_forced_release_keys, }, + { + .ident = "OQO Model 01+", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "OQO"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), + }, + .callback = atkbd_setup_scancode_fixup, + .driver_data = atkbd_oqo_01plus_scancode_fixup, + }, { } }; -- GitLab From 6135434a54719c45fdc6add1ba4965dea89ab069 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 22 Oct 2009 14:43:17 -0700 Subject: [PATCH 0135/1165] omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad Only mach-omap2 boards are currently using matrix_keypad. Allow mach-omap1 boards to use the old style keypad.h without breaking. Created against linux-2.6.32-rc5. Compile tested with omap_3430sdp_defconfig and rx51_defconfig. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-3430sdp.c | 2 +- arch/arm/mach-omap2/board-ldp.c | 2 +- arch/arm/mach-omap2/board-omap3evm.c | 2 +- arch/arm/mach-omap2/board-omap3pandora.c | 2 +- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- arch/arm/mach-omap2/board-rx51.c | 1 - arch/arm/mach-omap2/board-zoom2.c | 2 +- arch/arm/plat-omap/include/mach/keypad.h | 5 ++++- 8 files changed, 10 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index efaf053eba8..0acb5560229 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -38,7 +39,6 @@ #include #include -#include #include #include "sdram-qimonda-hyb18m512160af-6.h" diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d110a7fdfbd..d57ec2f4d0a 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -41,7 +42,6 @@ #include #include #include -#include #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index e4ec0c59121..4c4d7f8dbd7 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -37,7 +38,6 @@ #include #include #include -#include #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 7f6bf8772af..5326e0d6159 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -39,7 +40,6 @@ #include #include #include -#include #include #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 2b0eb1ba5d7..e34d96a825e 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -27,7 +28,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f9196c3b1a7..78869a9a1cc 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index fd3369d5e5c..ea00486a5e5 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -22,7 +23,6 @@ #include #include -#include #include "mmc-twl4030.h" #include "sdram-micron-mt46h32m32lf-6.h" diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h index d91b9be334f..3ae52ccc793 100644 --- a/arch/arm/plat-omap/include/mach/keypad.h +++ b/arch/arm/plat-omap/include/mach/keypad.h @@ -10,7 +10,7 @@ #ifndef ASMARM_ARCH_KEYPAD_H #define ASMARM_ARCH_KEYPAD_H -#include +#warning: Please update the board to use matrix_keypad.h instead struct omap_kp_platform_data { int rows; @@ -37,6 +37,9 @@ struct omap_kp_platform_data { #define KEY_PERSISTENT 0x00800000 #define KEYNUM_MASK 0x00EFFFFF +#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val)) +#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \ + KEY_PERSISTENT) #endif -- GitLab From 9da65a99e5e6a074c586474961dbf560e439df50 Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 22 Oct 2009 14:46:31 -0700 Subject: [PATCH 0136/1165] omap: SDMA: Fix omap_stop_dma() API for channel linking OMAP sDMA driver API omap_stop_dma() doesn't really stop the dma when used in linking scenario. The DMA channel needs to be disabled before resetting the chain. Also fix clearing of the OMAP_DMA_ACTIVE status in the linked case. Cc: Hari n Cc: Jarkko Nikula Signed-off-by: Santosh Shilimkar Signed-off-by: Venkatraman S Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 0eb676d7e80..b53125f4129 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -978,6 +978,14 @@ void omap_stop_dma(int lch) { u32 l; + /* Disable all interrupts on the channel */ + if (cpu_class_is_omap1()) + dma_write(0, CICR(lch)); + + l = dma_read(CCR(lch)); + l &= ~OMAP_DMA_CCR_EN; + dma_write(l, CCR(lch)); + if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT]; @@ -995,18 +1003,8 @@ void omap_stop_dma(int lch) next_lch = dma_chan[cur_lch].next_lch; cur_lch = next_lch; } while (next_lch != -1); - - return; } - /* Disable all interrupts on the channel */ - if (cpu_class_is_omap1()) - dma_write(0, CICR(lch)); - - l = dma_read(CCR(lch)); - l &= ~OMAP_DMA_CCR_EN; - dma_write(l, CCR(lch)); - dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE; } EXPORT_SYMBOL(omap_stop_dma); -- GitLab From dcc730dc9d7614fdaf6bce73d6e8ffe47c8820b1 Mon Sep 17 00:00:00 2001 From: Hiroshi DOYU Date: Thu, 22 Oct 2009 14:46:32 -0700 Subject: [PATCH 0137/1165] omap: iommu: fix wrong condition check for SUPERSECTION A bit (2 << 0) is set both on SECTION and SUPERSECTION. To identify SUPERSECTION correctly, other bits should be compared too. Reported-by: "Srinivas Pulukuru" Signed-off-by: Hiroshi DOYU Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 4b601270730..94584f167a8 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da) nent = 1; /* for the next L1 entry */ } else { bytes = IOPGD_SIZE; - if (*iopgd & IOPGD_SUPER) { + if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) { nent *= 16; /* rewind to the 1st entry */ iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK); -- GitLab From c33da3a80074094303d643a90ef589330b491270 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 22 Oct 2009 14:47:42 -0700 Subject: [PATCH 0138/1165] omap1: Fix redundant UARTs pin muxing that can break other hardware support Commit 15ac408ee5a509053a765b816e9179515329369f removed enabled_uart and OMAP_TAG_UART. This works for mach-omap2, but causes issues on mach-omap1 for some boards as the mach-omap1 serial.c was muxing pins based on the enabled_uart flag for 15xx. Fix this by muxing pins in board-*.c files for the 15xx boards for the uart ports that had enabled_uart flag set before the commit above. Tested on Amsdtrad Delta only. Note that in the future we should add support for powering down the uarts with a timer like mach-omap2/serial.c does. Otherwise the enabled uarts will be blocking retention-while-idle. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 4 ++++ arch/arm/mach-omap1/board-generic.c | 8 ++++++++ arch/arm/mach-omap1/board-innovator.c | 20 ++++++++++++++++++++ arch/arm/mach-omap1/board-palmte.c | 8 ++++++++ arch/arm/mach-omap1/board-palmtt.c | 8 ++++++++ arch/arm/mach-omap1/board-palmz71.c | 8 ++++++++ arch/arm/mach-omap1/board-sx1.c | 8 ++++++++ arch/arm/mach-omap1/board-voiceblue.c | 8 ++++++++ arch/arm/mach-omap1/serial.c | 26 -------------------------- 9 files changed, 72 insertions(+), 26 deletions(-) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 42920f9c1a1..972499e9524 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = { static void __init ams_delta_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc)); omap_board_config = ams_delta_config; diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index fb47239da72..6c8a41f20e5 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -64,6 +64,14 @@ static void __init omap_generic_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_usb_init(&generic1510_usb_config); } #endif diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cc2abbb2d0f..cd6c3951482 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -376,6 +376,26 @@ static void __init innovator_init(void) { #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { + unsigned char reg; + + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM1_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + + reg = fpga_read(OMAP1510_FPGA_POWER); + reg |= OMAP1510_FPGA_PCR_COM2_EN; + fpga_write(reg, OMAP1510_FPGA_POWER); + udelay(10); + platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices)); spi_register_board_info(innovator1510_boardinfo, ARRAY_SIZE(innovator1510_boardinfo)); diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 90dd0431b0d..4de258420f3 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void) static void __init omap_palmte_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_board_config = palmte_config; omap_board_config_size = ARRAY_SIZE(palmte_config); diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 8256139891f..d972cf941b7 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) { static void __init omap_palmtt_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + omap_mpu_wdt_mode(0); omap_board_config = palmtt_config; diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 81b6bde1c5a..986bd4df0e9 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -307,6 +307,14 @@ palmz71_gpio_setup(int early) static void __init omap_palmz71_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + palmz71_gpio_setup(1); omap_mpu_wdt_mode(0); diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 02c85ca2e1d..056ae64e0f5 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = { static void __init omap_sx1_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices)); omap_board_config = sx1_config; diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c06e7a55347..07b07522d5b 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void) static void __init voiceblue_init(void) { + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + /* Watchdog */ gpio_request(0, "Watchdog"); /* smc91x reset */ diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d496e50fec4..d23979bc0fd 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -131,8 +131,6 @@ void __init omap_serial_init(void) } for (i = 0; i < OMAP_MAX_NR_PORTS; i++) { - unsigned char reg; - switch (i) { case 0: uart1_ck = clk_get(NULL, "uart1_ck"); @@ -143,16 +141,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart1_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM1_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 1: uart2_ck = clk_get(NULL, "uart2_ck"); @@ -165,16 +153,6 @@ void __init omap_serial_init(void) else clk_set_rate(uart2_ck, 48000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - if (machine_is_omap_innovator()) { - reg = fpga_read(OMAP1510_FPGA_POWER); - reg |= OMAP1510_FPGA_PCR_COM2_EN; - fpga_write(reg, OMAP1510_FPGA_POWER); - udelay(10); - } - } break; case 2: uart3_ck = clk_get(NULL, "uart3_ck"); @@ -185,10 +163,6 @@ void __init omap_serial_init(void) if (cpu_is_omap15xx()) clk_set_rate(uart3_ck, 12000000); } - if (cpu_is_omap15xx()) { - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - } break; } omap_serial_reset(&serial_platform_data[i]); -- GitLab From b3dba0b81e9612c385c4fb55d546e0104661168d Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 22 Oct 2009 14:47:42 -0700 Subject: [PATCH 0139/1165] omap1: Fix DSP public peripherals support for ams-delta DSP public peripherals used to work on OMAP1510 based (or all OMAP1 class?) machines as long as old dspgateway code were present in the l-o tree. For several months it is no longer included, breaking support for McBSP1 based audio on Amstrad Delta, for example. This patch, derived from the old dspgateway code, corrects the problem for the board by simply taking the DSP out of reset state, I guess. That way, things should not break when a new dsp code is added to the tree, and the change can be reverted then. If there are any reports on McBSP1 or other DSP public peripherals not working for other OMAP1 machines (I've not heard of any for now), I can prepare a more general patch providing an extra include file with a helper function defined. Created and tested against linux-2.6.32-rc5 Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/board-ams-delta.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 972499e9524..8ad5cc3e83e 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -235,6 +235,8 @@ static void __init ams_delta_init(void) omap_usb_init(&ams_delta_usb_config); platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); + + omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } static struct plat_serial8250_port ams_delta_modem_ports[] = { -- GitLab From d2fbf3451d338ac68c8a555207183647074f78a0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 22 Oct 2009 14:48:13 -0700 Subject: [PATCH 0140/1165] omap2: Fix detection of n8x0 Otherwise the machine_is_nokia_n8*() does not work. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 75b1c7efae7..aad194f61a3 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX +config MACH_NOKIA_N800 + bool + +config MACH_NOKIA_N810 + bool + +config MACH_NOKIA_N810_WIMAX + bool + config MACH_NOKIA_N8X0 bool "Nokia N800/N810" depends on ARCH_OMAP2420 + select MACH_NOKIA_N800 + select MACH_NOKIA_N810 + select MACH_NOKIA_N810_WIMAX config MACH_NOKIA_RX51 bool "Nokia RX-51 board" -- GitLab From 60dbd8c95fe21955391bbaf0b66ac443742a3dd4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 22 Oct 2009 14:48:13 -0700 Subject: [PATCH 0141/1165] omap2: Fix console serial port number for n8x0 With the recent changes omap serial ports match the physical numbering like they should. Fix the kernel CMDLINE accordingly so console works. Signed-off-by: Tony Lindgren --- arch/arm/configs/n8x0_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig index 8da75dede52..264f52b5c52 100644 --- a/arch/arm/configs/n8x0_defconfig +++ b/arch/arm/configs/n8x0_defconfig @@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0x10C08000 CONFIG_ZBOOT_ROM_BSS=0x10200000 # CONFIG_ZBOOT_ROM is not set -CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8" +CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set -- GitLab From b427f92f8cfca2787c18a77bef15cc8b13341774 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 22 Oct 2009 14:48:13 -0700 Subject: [PATCH 0142/1165] omap3: PM: enable UART3 module wakeups UART3 is in the PER powerdomain. If PER goes idle/inactive independently of CORE, for UART3 to wakeup it must have its wakeup enable bits setup in PM_WKEN_PER. This patch enables these bits. The reason it works when PER and CORE work together is because when CORE goes inactive/retention, the IOPAD wakeups are enabled and trigger UART3 wakeup. Without this patch, when the UART inactivity timer fires for UART3, its clocks are disabled and it's unable to wakeup so will be unusable until PER is awoken by another source. Another way of testing is by keeping CORE on during suspend but allowing PER to hit retention # echo 3 > /debug/pm_debug/core_pwrdm/suspend then enter suspend # echo mem > /sys/power/state Without this patch, UART3 will be unable to wakeup the system. Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/pm34xx.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 378c2f61835..89463190923 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -639,14 +639,15 @@ static void __init prcm_setup_regs(void) prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN, OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET); - /* Enable GPIO wakeups in PER */ + /* Enable wakeups in PER */ prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN); + OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3, + OMAP3430_PER_MOD, PM_WKEN); /* and allow them to wake up MPU */ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 | OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 | - OMAP3430_GRPSEL_GPIO6, + OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3, OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL); /* Don't attach IVA interrupts */ -- GitLab From 5b7815b5ca2c7b44ebaaa33c66a3068d6de27bce Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 22 Oct 2009 14:48:14 -0700 Subject: [PATCH 0143/1165] omap4: Allow omap_serial_early_init() for OMAP4430 board This patch enables omap_serial_early_init() function for OMAP4430 SDP. Without this the bootup would throw oops in omap_serial_init(). Note that the ifndef CONFIG_ARCH_OMAP4 is split into two sections to enable omap_serial_early_init(). This ifndef cannot be removed until omap4 clock framework is implemented. Signed-off-by: Santosh Shilimkar Reviewed-By: Tony Lindgren Reviewed-By: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 4 ++-- arch/arm/mach-omap2/io.c | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index eb37c40ea83..609a5a4a7e2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -58,6 +58,8 @@ static void __init gic_init_irq(void) static void __init omap_4430sdp_init_irq(void) { + omap_board_config = sdp4430_config; + omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap2_init_common_hw(NULL, NULL); #ifdef CONFIG_OMAP_32K_TIMER omap2_gp_clockevent_set_gptimer(1); @@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void) static void __init omap_4430sdp_init(void) { platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); - omap_board_config = sdp4430_config; - omap_board_config_size = ARRAY_SIZE(sdp4430_config); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e3a3bad1d84..56be87d13ed 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); omap2_clk_init(); +#endif omap_serial_early_init(); +#ifndef CONFIG_ARCH_OMAP4 omap_hwmod_late_init(); omap_pm_if_init(); omap2_sdrc_init(sdrc_cs0, sdrc_cs1); -- GitLab From 54341c9b741dc5646842fe47eccfc3b506c6dafa Mon Sep 17 00:00:00 2001 From: Santosh Shilimkar Date: Thu, 22 Oct 2009 14:48:14 -0700 Subject: [PATCH 0144/1165] omap4: Fix UART4 platform data on omap4 This patch removes the unnecessary UART4 platform which is under data is wrong because of this There is a separate platform structure for UART4 Signed-off-by: Santosh Shilimkar Reviewed-By: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/serial.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index ae2186892c8..54dfeb5d566 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = { .regshift = 2, .uartclk = OMAP24XX_BASE_BAUD * 16, }, { -#ifdef CONFIG_ARCH_OMAP4 - .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE), - .mapbase = OMAP_UART4_BASE, - .irq = 70, - .flags = UPF_BOOT_AUTOCONF, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = OMAP24XX_BASE_BAUD * 16, - }, { -#endif .flags = 0 } }; -- GitLab From 8bee0a91dd2f472d51dc107288c988ae0a0f371a Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Wed, 21 Oct 2009 19:39:01 +0000 Subject: [PATCH 0145/1165] netxen: fix i2c init Avoid resetting subsys ID in i2c block. Also remove duplicate check for address tranlsation error. Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_hdr.h | 1 + drivers/net/netxen/netxen_nic_init.c | 8 ++------ 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 7a7177421d7..1c46da63212 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -419,6 +419,7 @@ enum { #define NETXEN_CRB_ROMUSB \ NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_ROMUSB) #define NETXEN_CRB_I2Q NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2Q) +#define NETXEN_CRB_I2C0 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2C0) #define NETXEN_CRB_SMB NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SMB) #define NETXEN_CRB_MAX NETXEN_PCI_CRB_WINDOW(64) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 91c2bc61c8e..e40b914d6fa 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -531,6 +531,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) { + if (off == (NETXEN_CRB_I2C0 + 0x1c)) + continue; /* do not reset PCI */ if (off == (ROMUSB_GLB + 0xbc)) continue; @@ -553,12 +555,6 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; } - if (off == NETXEN_ADDR_ERROR) { - printk(KERN_ERR "%s: Err: Unknown addr: 0x%08x\n", - netxen_nic_driver_name, buf[i].addr); - continue; - } - init_delay = 1; /* After writing this register, HW needs time for CRB */ /* to quiet down (else crb_window returns 0xffffffff) */ -- GitLab From ff8a306d63a01f15f166039de94c448c76140d1d Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Wed, 21 Oct 2009 19:39:02 +0000 Subject: [PATCH 0146/1165] netxen: fix tx timeout handling on firmware hang Clear NX_RESETING bit in netxen_tx_timeout_task() so that the firmware watchdog task can catch need_reset request from tx timeout. Signed-off-by: Amit Kumar Salecha Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 7fc15e9e8ad..0b4a56a8c8d 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -1919,6 +1919,7 @@ static void netxen_tx_timeout_task(struct work_struct *work) request_reset: adapter->need_fw_reset = 1; + clear_bit(__NX_RESETTING, &adapter->state); } struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev) -- GitLab From 0dc6d9cbe7df4d2c3cdf17cd2f78733102b0fea6 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Wed, 21 Oct 2009 19:39:03 +0000 Subject: [PATCH 0147/1165] netxen: avoid undue board config check Old code assumed board config version in the flash to be 1. When this will get changed by tools, driver just refuses to attach. This is unnecessary since driver does not have to parse board config structure directly (maintained by firmware). Signed-off-by: Dhananjay Phadke Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_hw.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 32314000dfc..3185a98b091 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -1901,22 +1901,16 @@ netxen_setup_hwops(struct netxen_adapter *adapter) int netxen_nic_get_board_info(struct netxen_adapter *adapter) { - int offset, board_type, magic, header_version; + int offset, board_type, magic; struct pci_dev *pdev = adapter->pdev; offset = NX_FW_MAGIC_OFFSET; if (netxen_rom_fast_read(adapter, offset, &magic)) return -EIO; - offset = NX_HDR_VERSION_OFFSET; - if (netxen_rom_fast_read(adapter, offset, &header_version)) - return -EIO; - - if (magic != NETXEN_BDINFO_MAGIC || - header_version != NETXEN_BDINFO_VERSION) { - dev_err(&pdev->dev, - "invalid board config, magic=%08x, version=%08x\n", - magic, header_version); + if (magic != NETXEN_BDINFO_MAGIC) { + dev_err(&pdev->dev, "invalid board config, magic=%08x\n", + magic); return -EIO; } -- GitLab From 2bd9af046fdc10703b266b0f3b25423f0b7d703e Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Wed, 21 Oct 2009 23:07:04 +0000 Subject: [PATCH 0148/1165] isdn: fix possible circular locking dependency MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There's a circular locking dependency: ---> isdn_net_get_locked_lp     --->lock &nd->queue_lock     --->lock &nd->queue->xmit_lock     .....................     ---->unlock &nd->queue_lock ---> isdn_net_writebuf_skb (called with &nd->queue->xmit_lock locked)     ---->isdn_net_inc_frame_cnt          ---->isdn_net_device_busy               ----> lock &nd->queue_lock This will trigger lockdep warnings:  =======================================================  [ INFO: possible circular locking dependency detected ]  2.6.32-rc4-testing #7  -------------------------------------------------------  ipppd/28379 is trying to acquire lock:  (&netdev->queue_lock){......}, at: [] isdn_net_device_busy+0x2c/0x74 [isdn]  but task is already holding lock:  (&netdev->local->xmit_lock){+.....}, at: [] isdn_net_write_super+0x3f/0x6e [isdn]  which lock already depends on the new lock. ....... We don't need to lock nd->queue->xmit_lock to protect single isdn_net_lp_busy(). This can fix above lockdep warnings. Reported-and-tested-by: Tilman Schmidt Signed-off-by: Xiaotian Feng Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_net.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/isdn/i4l/isdn_net.h b/drivers/isdn/i4l/isdn_net.h index 74032d0881e..7511f08effa 100644 --- a/drivers/isdn/i4l/isdn_net.h +++ b/drivers/isdn/i4l/isdn_net.h @@ -83,19 +83,19 @@ static __inline__ isdn_net_local * isdn_net_get_locked_lp(isdn_net_dev *nd) spin_lock_irqsave(&nd->queue_lock, flags); lp = nd->queue; /* get lp on top of queue */ - spin_lock(&nd->queue->xmit_lock); while (isdn_net_lp_busy(nd->queue)) { - spin_unlock(&nd->queue->xmit_lock); nd->queue = nd->queue->next; if (nd->queue == lp) { /* not found -- should never happen */ lp = NULL; goto errout; } - spin_lock(&nd->queue->xmit_lock); } lp = nd->queue; nd->queue = nd->queue->next; + spin_unlock_irqrestore(&nd->queue_lock, flags); + spin_lock(&lp->xmit_lock); local_bh_disable(); + return lp; errout: spin_unlock_irqrestore(&nd->queue_lock, flags); return lp; -- GitLab From 74eee2e8d08048c847d1998c686e12a477ff939a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 22 Oct 2009 21:22:18 -0700 Subject: [PATCH 0149/1165] e1000e: reset the PHY on 82577/82578 when going to Sx The PHY on 82577/82578 parts needs a soft reset when transitioning to Sx state in order for the PHY write which disables gigabit speed to take effect. Gigabit speed must be disabled in order for the PHY writes to registers on page 800 (the wakeup control registers) to work as expected otherwise the system might not wake via WoL. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 99df2abf82a..aa0ab0eb8c7 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -2843,9 +2843,8 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) E1000_PHY_CTRL_GBE_DISABLE; ew32(PHY_CTRL, phy_ctrl); - /* Workaround SWFLAG unexpectedly set during S0->Sx */ if (hw->mac.type == e1000_pchlan) - udelay(500); + e1000_phy_hw_reset_ich8lan(hw); default: break; } -- GitLab From c62f4c453ab4b0240ab857bfd089da2c01ad91e7 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 22 Oct 2009 21:37:56 -0700 Subject: [PATCH 0150/1165] net: use WARN() for the WARN_ON in commit b6b39e8f3fbbb Commit b6b39e8f3fbbb (tcp: Try to catch MSG_PEEK bug) added a printk() to the WARN_ON() that's in tcp.c. This patch changes this combination to WARN(); the advantage of WARN() is that the printk message shows up inside the message, so that kerneloops.org will collect the message. In addition, this gets rid of an extra if() statement. Signed-off-by: Arjan van de Ven Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 90b2e0649bf..98440ad8255 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1442,9 +1442,9 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, goto found_ok_skb; if (tcp_hdr(skb)->fin) goto found_fin_ok; - if (WARN_ON(!(flags & MSG_PEEK))) - printk(KERN_INFO "recvmsg bug 2: copied %X " - "seq %X\n", *seq, TCP_SKB_CB(skb)->seq); + WARN(!(flags & MSG_PEEK), KERN_INFO "recvmsg bug 2: " + "copied %X seq %X\n", *seq, + TCP_SKB_CB(skb)->seq); } /* Well, if we have backlog, try to process it now yet. */ -- GitLab From 196f17eb1754381cf4c68c117a5ddd96cccc1366 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Thu, 22 Oct 2009 21:43:43 -0700 Subject: [PATCH 0151/1165] myri10ge: improve port type reporting in ethtool Improve the reporting of myri10ge port type in ethtool, and update for new boards. Signed-off-by: Brice Goglin Signed-off-by: Andrew Gallatin Signed-off-by: David S. Miller --- drivers/net/myri10ge/myri10ge.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 6930c87f362..f3624517cb0 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.5.0-1.432" +#define MYRI10GE_VERSION_STR "1.5.1-1.451" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -1624,10 +1624,21 @@ myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd) return 0; } } - if (*ptr == 'R' || *ptr == 'Q') { - /* We've found either an XFP or quad ribbon fiber */ + if (*ptr == '2') + ptr++; + if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') { + /* We've found either an XFP, quad ribbon fiber, or SFP+ */ cmd->port = PORT_FIBRE; + cmd->supported |= SUPPORTED_FIBRE; + cmd->advertising |= ADVERTISED_FIBRE; + } else { + cmd->port = PORT_OTHER; } + if (*ptr == 'R' || *ptr == 'S') + cmd->transceiver = XCVR_EXTERNAL; + else + cmd->transceiver = XCVR_INTERNAL; + return 0; } -- GitLab From bc36b4285136bcc8dd43e91ffe34df6a52a0cfaf Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 17 Oct 2009 02:00:07 +0000 Subject: [PATCH 0152/1165] net: au1000_eth: add missing capability.h fixes the following build failure: CC drivers/net/au1000_eth.o /drivers/net/au1000_eth.c: In function 'au1000_set_settings': /drivers/net/au1000_eth.c:623: error: implicit declaration of function 'capable' /drivers/net/au1000_eth.c:623: error: 'CAP_NET_ADMIN' undeclared (first use in this function) /drivers/net/au1000_eth.c:623: error: (Each undeclared identifier is reported only once /drivers/net/au1000_eth.c:623: error: for each function it appears in. Signed-off-by: Manuel Lauss Signed-off-by: David S. Miller --- drivers/net/au1000_eth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 04f63c77071..ce6f1ac25df 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -34,6 +34,7 @@ * * */ +#include #include #include #include -- GitLab From db519144243de6b17ff0c56c26f06059743110a7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 20 Oct 2009 02:35:50 +0000 Subject: [PATCH 0153/1165] ifb: should not use __dev_get_by_index() without locks At this point (ri_tasklet()), RTNL or dev_base_lock are not held, we must use dev_get_by_index() instead of __dev_get_by_index() Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/ifb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 801f088c134..030913f8bd2 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -98,12 +98,13 @@ static void ri_tasklet(unsigned long dev) stats->tx_packets++; stats->tx_bytes +=skb->len; - skb->dev = __dev_get_by_index(&init_net, skb->iif); + skb->dev = dev_get_by_index(&init_net, skb->iif); if (!skb->dev) { dev_kfree_skb(skb); stats->tx_dropped++; break; } + dev_put(skb->dev); skb->iif = _dev->ifindex; if (from & AT_EGRESS) { -- GitLab From 721a669b7225edeeb0ca8e2bf71b83882326a71b Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Tue, 15 Sep 2009 14:33:08 +0200 Subject: [PATCH 0154/1165] perf events: Fix swevent hrtimer sampling by keeping track of remaining time when enabling/disabling swevent hrtimers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Make the hrtimer based events work for sysprof. Whenever a swevent is scheduled out, the hrtimer is canceled. When it is scheduled back in, the timer is restarted. This happens every scheduler tick, which means the timer never expired because it was getting repeatedly restarted over and over with the same period. To fix that, save the remaining time when disabling; when reenabling, use that saved time as the period instead of the user-specified sampling period. Also, move the starting and stopping of the hrtimers to helper functions instead of duplicating the code. Signed-off-by: Søren Sandmann Pedersen LKML-Reference: Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 4 +-- kernel/perf_event.c | 61 +++++++++++++++++++++++++------------- 2 files changed, 43 insertions(+), 22 deletions(-) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 2e6d95f9741..9e7012689a8 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -471,8 +471,8 @@ struct hw_perf_event { unsigned long event_base; int idx; }; - union { /* software */ - atomic64_t count; + struct { /* software */ + s64 remaining; struct hrtimer hrtimer; }; }; diff --git a/kernel/perf_event.c b/kernel/perf_event.c index afb7ef3dbc4..33ff019f9aa 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -3969,6 +3969,42 @@ static enum hrtimer_restart perf_swevent_hrtimer(struct hrtimer *hrtimer) return ret; } +static void perf_swevent_start_hrtimer(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + + hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + hwc->hrtimer.function = perf_swevent_hrtimer; + if (hwc->sample_period) { + u64 period; + + if (hwc->remaining) { + if (hwc->remaining < 0) + period = 10000; + else + period = hwc->remaining; + hwc->remaining = 0; + } else { + period = max_t(u64, 10000, hwc->sample_period); + } + __hrtimer_start_range_ns(&hwc->hrtimer, + ns_to_ktime(period), 0, + HRTIMER_MODE_REL, 0); + } +} + +static void perf_swevent_cancel_hrtimer(struct perf_event *event) +{ + struct hw_perf_event *hwc = &event->hw; + + if (hwc->sample_period) { + ktime_t remaining = hrtimer_get_remaining(&hwc->hrtimer); + hwc->remaining = ktime_to_ns(remaining); + + hrtimer_cancel(&hwc->hrtimer); + } +} + /* * Software event: cpu wall time clock */ @@ -3991,22 +4027,14 @@ static int cpu_clock_perf_event_enable(struct perf_event *event) int cpu = raw_smp_processor_id(); atomic64_set(&hwc->prev_count, cpu_clock(cpu)); - hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - hwc->hrtimer.function = perf_swevent_hrtimer; - if (hwc->sample_period) { - u64 period = max_t(u64, 10000, hwc->sample_period); - __hrtimer_start_range_ns(&hwc->hrtimer, - ns_to_ktime(period), 0, - HRTIMER_MODE_REL, 0); - } + perf_swevent_start_hrtimer(event); return 0; } static void cpu_clock_perf_event_disable(struct perf_event *event) { - if (event->hw.sample_period) - hrtimer_cancel(&event->hw.hrtimer); + perf_swevent_cancel_hrtimer(event); cpu_clock_perf_event_update(event); } @@ -4043,22 +4071,15 @@ static int task_clock_perf_event_enable(struct perf_event *event) now = event->ctx->time; atomic64_set(&hwc->prev_count, now); - hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - hwc->hrtimer.function = perf_swevent_hrtimer; - if (hwc->sample_period) { - u64 period = max_t(u64, 10000, hwc->sample_period); - __hrtimer_start_range_ns(&hwc->hrtimer, - ns_to_ktime(period), 0, - HRTIMER_MODE_REL, 0); - } + + perf_swevent_start_hrtimer(event); return 0; } static void task_clock_perf_event_disable(struct perf_event *event) { - if (event->hw.sample_period) - hrtimer_cancel(&event->hw.hrtimer); + perf_swevent_cancel_hrtimer(event); task_clock_perf_event_update(event, event->ctx->time); } -- GitLab From 54f4407608c59712a8f5ec1e10dfac40bef5a2e7 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Thu, 22 Oct 2009 18:34:08 +0200 Subject: [PATCH 0155/1165] perf events: Don't generate events for the idle task when exclude_idle is set MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Getting samples for the idle task is often not interesting, so don't generate them when exclude_idle is set for the event in question. Signed-off-by: Søren Sandmann Pedersen Cc: Peter Zijlstra Cc: Mike Galbraith Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Cc: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/perf_event.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/perf_event.c b/kernel/perf_event.c index 33ff019f9aa..7f29643c898 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -3959,8 +3959,9 @@ static enum hrtimer_restart perf_swevent_hrtimer(struct hrtimer *hrtimer) regs = task_pt_regs(current); if (regs) { - if (perf_event_overflow(event, 0, &data, regs)) - ret = HRTIMER_NORESTART; + if (!(event->attr.exclude_idle && current->pid == 0)) + if (perf_event_overflow(event, 0, &data, regs)) + ret = HRTIMER_NORESTART; } period = max_t(u64, 10000, event->hw.sample_period); -- GitLab From 14a3f40aafacde1dfd6912327ae14df4baf10304 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Fri, 23 Oct 2009 07:31:01 -0700 Subject: [PATCH 0156/1165] x86: Remove STACKPROTECTOR_ALL STACKPROTECTOR_ALL has a really high overhead (runtime and stack footprint) and is not really worth it protection wise (the normal STACKPROTECTOR is in effect for all functions with buffers already), so lets just remove the option entirely. Reported-by: Dave Jones Reported-by: Chuck Ebbert Signed-off-by: Arjan van de Ven Cc: Eric Sandeen LKML-Reference: <20091023073101.3dce4ebb@infradead.org> Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 4 ---- arch/x86/Makefile | 1 - 2 files changed, 5 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 07e01149e3b..72ace9515a0 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1443,12 +1443,8 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. -config CC_STACKPROTECTOR_ALL - bool - config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - select CC_STACKPROTECTOR_ALL ---help--- This option turns on the -fstack-protector GCC feature. This feature puts, at the beginning of functions, a canary value on diff --git a/arch/x86/Makefile b/arch/x86/Makefile index a012ee8ef80..d2d24c9ee64 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -76,7 +76,6 @@ ifdef CONFIG_CC_STACKPROTECTOR cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y) stackp-y := -fstack-protector - stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all KBUILD_CFLAGS += $(stackp-y) else $(warning stack protector enabled but no compiler support) -- GitLab From a8b40bc7e635831b61c43acc71a86d3a68b2dff0 Mon Sep 17 00:00:00 2001 From: Terry Loftin Date: Thu, 22 Oct 2009 21:36:01 -0400 Subject: [PATCH 0157/1165] nfs: Panic when commit fails Actually pass the NFS_FILE_SYNC option to the server to avoid a Panic in nfs_direct_write_complete() when a commit fails. At the end of an nfs write, if the nfs commit fails, all the writes will be rescheduled. They are supposed to be rescheduled as NFS_FILE_SYNC writes, but the rpc_task structure is not completely intialized and so the option is not passed. When the rescheduled writes complete, the return indicates that they are NFS_UNSTABLE and we try to do another commit. This leads to a Panic because the commit data structure pointer was set to null in the initial (failed) commit attempt. Signed-off-by: Terry Loftin Signed-off-by: Trond Myklebust --- fs/nfs/direct.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfs/direct.c b/fs/nfs/direct.c index 6c3210099d5..e1d415e9784 100644 --- a/fs/nfs/direct.c +++ b/fs/nfs/direct.c @@ -457,6 +457,7 @@ static void nfs_direct_write_reschedule(struct nfs_direct_req *dreq) }; struct rpc_task_setup task_setup_data = { .rpc_client = NFS_CLIENT(inode), + .rpc_message = &msg, .callback_ops = &nfs_write_direct_ops, .workqueue = nfsiod_workqueue, .flags = RPC_TASK_ASYNC, -- GitLab From 0e442c60dd39ac6924b11a20497734bd2303744c Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 19 Oct 2009 10:09:33 +0900 Subject: [PATCH 0158/1165] drm/i915: add FIFO watermark support for G4x Turns out G4x needs to have sensible watermarks set, especially for self-refresh enabled modes. Add support for it. Signed-off-by: Jesse Barnes Tested-by: Dirk Hohndel Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_reg.h | 12 +++++ drivers/gpu/drm/i915/intel_display.c | 80 +++++++++++++++++++++++++--- 2 files changed, 84 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 78f336e0083..1687edf6879 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1799,17 +1799,29 @@ #define DSPARB_AEND_SHIFT 0 #define DSPFW1 0x70034 +#define DSPFW_SR_SHIFT 23 +#define DSPFW_CURSORB_SHIFT 16 +#define DSPFW_PLANEB_SHIFT 8 #define DSPFW2 0x70038 +#define DSPFW_CURSORA_MASK 0x00003f00 +#define DSPFW_CURSORA_SHIFT 16 #define DSPFW3 0x7003c +#define DSPFW_HPLL_SR_EN (1<<31) +#define DSPFW_CURSOR_SR_SHIFT 24 #define IGD_SELF_REFRESH_EN (1<<30) /* FIFO watermark sizes etc */ +#define G4X_FIFO_LINE_SIZE 64 #define I915_FIFO_LINE_SIZE 64 #define I830_FIFO_LINE_SIZE 32 + +#define G4X_FIFO_SIZE 127 #define I945_FIFO_SIZE 127 /* 945 & 965 */ #define I915_FIFO_SIZE 95 #define I855GM_FIFO_SIZE 127 /* In cachelines */ #define I830_FIFO_SIZE 95 + +#define G4X_MAX_WM 0x3f #define I915_MAX_WM 0x3f #define IGD_DISPLAY_FIFO 512 /* in 64byte unit */ diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e189fd6dedc..47d6ff05899 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2143,6 +2143,13 @@ static struct intel_watermark_params igd_cursor_hplloff_wm = { IGD_CURSOR_GUARD_WM, IGD_FIFO_LINE_SIZE }; +static struct intel_watermark_params g4x_wm_info = { + G4X_FIFO_SIZE, + G4X_MAX_WM, + G4X_MAX_WM, + 2, + G4X_FIFO_LINE_SIZE, +}; static struct intel_watermark_params i945_wm_info = { I945_FIFO_SIZE, I915_MAX_WM, @@ -2433,17 +2440,74 @@ static int i830_get_fifo_size(struct drm_device *dev, int plane) return size; } -static void g4x_update_wm(struct drm_device *dev, int unused, int unused2, - int unused3, int unused4) +static void g4x_update_wm(struct drm_device *dev, int planea_clock, + int planeb_clock, int sr_hdisplay, int pixel_size) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 fw_blc_self = I915_READ(FW_BLC_SELF); + int total_size, cacheline_size; + int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr; + struct intel_watermark_params planea_params, planeb_params; + unsigned long line_time_us; + int sr_clock, sr_entries = 0, entries_required; - if (i915_powersave) - fw_blc_self |= FW_BLC_SELF_EN; - else - fw_blc_self &= ~FW_BLC_SELF_EN; - I915_WRITE(FW_BLC_SELF, fw_blc_self); + /* Create copies of the base settings for each pipe */ + planea_params = planeb_params = g4x_wm_info; + + /* Grab a couple of global values before we overwrite them */ + total_size = planea_params.fifo_size; + cacheline_size = planea_params.cacheline_size; + + /* + * Note: we need to make sure we don't overflow for various clock & + * latency values. + * clocks go from a few thousand to several hundred thousand. + * latency is usually a few thousand + */ + entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) / + 1000; + entries_required /= G4X_FIFO_LINE_SIZE; + planea_wm = entries_required + planea_params.guard_size; + + entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) / + 1000; + entries_required /= G4X_FIFO_LINE_SIZE; + planeb_wm = entries_required + planeb_params.guard_size; + + cursora_wm = cursorb_wm = 16; + cursor_sr = 32; + + DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); + + /* Calc sr entries for one plane configs */ + if (sr_hdisplay && (!planea_clock || !planeb_clock)) { + /* self-refresh has much higher latency */ + const static int sr_latency_ns = 12000; + + sr_clock = planea_clock ? planea_clock : planeb_clock; + line_time_us = ((sr_hdisplay * 1000) / sr_clock); + + /* Use ns/us then divide to preserve precision */ + sr_entries = (((sr_latency_ns / line_time_us) + 1) * + pixel_size * sr_hdisplay) / 1000; + sr_entries = roundup(sr_entries / cacheline_size, 1); + DRM_DEBUG("self-refresh entries: %d\n", sr_entries); + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + } + + DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", + planea_wm, planeb_wm, sr_entries); + + planea_wm &= 0x3f; + planeb_wm &= 0x3f; + + I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) | + (cursorb_wm << DSPFW_CURSORB_SHIFT) | + (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm); + I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) | + (cursora_wm << DSPFW_CURSORA_SHIFT)); + /* HPLL off in SR has some issues on G4x... disable it */ + I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) | + (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); } static void i965_update_wm(struct drm_device *dev, int unused, int unused2, -- GitLab From 629598da932cfa5ff398fe10bc123282a6f3049e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 20 Oct 2009 07:37:32 +0900 Subject: [PATCH 0159/1165] drm/i915: update watermarks before enabling PLLs When coming back from DPMS or turning on a display, make sure we have the watermarks set up before turning on the display plane, otherwise we may get underruns. Signed-off-by: Jesse Barnes Tested-by: Dirk Hohndel Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 47d6ff05899..7eed3db5451 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1803,6 +1803,8 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: + intel_update_watermarks(dev); + /* Enable the DPLL */ temp = I915_READ(dpll_reg); if ((temp & DPLL_VCO_ENABLE) == 0) { @@ -1840,7 +1842,6 @@ static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) /* Give the overlay scaler a chance to enable if it's on this pipe */ //intel_crtc_dpms_video(crtc, true); TODO - intel_update_watermarks(dev); break; case DRM_MODE_DPMS_OFF: intel_update_watermarks(dev); -- GitLab From fe798b9718bea5c48938fc38fa78ae9503b8de6c Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 20 Oct 2009 07:55:28 +0900 Subject: [PATCH 0160/1165] drm/i915: kill warning in intel_find_pll_g4x_dp Initialize clock.vco to silence gcc. Signed-off-by: Jesse Barnes Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 7eed3db5451..3ba6546b7c7 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -943,6 +943,7 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); clock.p = (clock.p1 * clock.p2); clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; + clock.vco = 0; memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } -- GitLab From 4204878179c99d419d392d78d817729992b4c442 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 21 Oct 2009 15:27:01 +0800 Subject: [PATCH 0161/1165] drm/i915: Ironlake suspend/resume support This adds registers save/restore for Ironlake to make suspend work. Signed-off-by: Guo, Chaohong [zhenyuw: some code re-orgnization, and add more save/restore for FDI link and transcoder registers, also fix palette register for Ironlake] Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 30 +++ drivers/gpu/drm/i915/i915_suspend.c | 281 ++++++++++++++++++++++------ 2 files changed, 256 insertions(+), 55 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index f6a3587ad06..9c67f0650a2 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -296,6 +296,12 @@ typedef struct drm_i915_private { u32 saveVBLANK_A; u32 saveVSYNC_A; u32 saveBCLRPAT_A; + u32 saveTRANS_HTOTAL_A; + u32 saveTRANS_HBLANK_A; + u32 saveTRANS_HSYNC_A; + u32 saveTRANS_VTOTAL_A; + u32 saveTRANS_VBLANK_A; + u32 saveTRANS_VSYNC_A; u32 savePIPEASTAT; u32 saveDSPASTRIDE; u32 saveDSPASIZE; @@ -307,6 +313,8 @@ typedef struct drm_i915_private { u32 saveBLC_HIST_CTL; u32 saveBLC_PWM_CTL; u32 saveBLC_PWM_CTL2; + u32 saveBLC_CPU_PWM_CTL; + u32 saveBLC_CPU_PWM_CTL2; u32 saveFPB0; u32 saveFPB1; u32 saveDPLL_B; @@ -318,6 +326,12 @@ typedef struct drm_i915_private { u32 saveVBLANK_B; u32 saveVSYNC_B; u32 saveBCLRPAT_B; + u32 saveTRANS_HTOTAL_B; + u32 saveTRANS_HBLANK_B; + u32 saveTRANS_HSYNC_B; + u32 saveTRANS_VTOTAL_B; + u32 saveTRANS_VBLANK_B; + u32 saveTRANS_VSYNC_B; u32 savePIPEBSTAT; u32 saveDSPBSTRIDE; u32 saveDSPBSIZE; @@ -351,6 +365,12 @@ typedef struct drm_i915_private { u32 saveIER; u32 saveIIR; u32 saveIMR; + u32 saveDEIER; + u32 saveDEIMR; + u32 saveGTIER; + u32 saveGTIMR; + u32 saveFDI_RXA_IMR; + u32 saveFDI_RXB_IMR; u32 saveCACHE_MODE_0; u32 saveD_STATE; u32 saveDSPCLK_GATE_D; @@ -384,6 +404,16 @@ typedef struct drm_i915_private { u32 savePIPEB_DP_LINK_M; u32 savePIPEA_DP_LINK_N; u32 savePIPEB_DP_LINK_N; + u32 saveFDI_RXA_CTL; + u32 saveFDI_TXA_CTL; + u32 saveFDI_RXB_CTL; + u32 saveFDI_TXB_CTL; + u32 savePFA_CTL_1; + u32 savePFB_CTL_1; + u32 savePFA_WIN_SZ; + u32 savePFB_WIN_SZ; + u32 savePFA_WIN_POS; + u32 savePFB_WIN_POS; struct { struct drm_mm gtt_space; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 75c5bed48be..992d5617e79 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -32,11 +32,15 @@ static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) { struct drm_i915_private *dev_priv = dev->dev_private; + u32 dpll_reg; - if (pipe == PIPE_A) - return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE); - else - return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE); + if (IS_IGDNG(dev)) { + dpll_reg = (pipe == PIPE_A) ? PCH_DPLL_A: PCH_DPLL_B; + } else { + dpll_reg = (pipe == PIPE_A) ? DPLL_A: DPLL_B; + } + + return (I915_READ(dpll_reg) & DPLL_VCO_ENABLE); } static void i915_save_palette(struct drm_device *dev, enum pipe pipe) @@ -49,6 +53,9 @@ static void i915_save_palette(struct drm_device *dev, enum pipe pipe) if (!i915_pipe_enabled(dev, pipe)) return; + if (IS_IGDNG(dev)) + reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B; + if (pipe == PIPE_A) array = dev_priv->save_palette_a; else @@ -68,6 +75,9 @@ static void i915_restore_palette(struct drm_device *dev, enum pipe pipe) if (!i915_pipe_enabled(dev, pipe)) return; + if (IS_IGDNG(dev)) + reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B; + if (pipe == PIPE_A) array = dev_priv->save_palette_a; else @@ -232,10 +242,16 @@ static void i915_save_modeset_reg(struct drm_device *dev) /* Pipe & plane A info */ dev_priv->savePIPEACONF = I915_READ(PIPEACONF); dev_priv->savePIPEASRC = I915_READ(PIPEASRC); - dev_priv->saveFPA0 = I915_READ(FPA0); - dev_priv->saveFPA1 = I915_READ(FPA1); - dev_priv->saveDPLL_A = I915_READ(DPLL_A); - if (IS_I965G(dev)) + if (IS_IGDNG(dev)) { + dev_priv->saveFPA0 = I915_READ(PCH_FPA0); + dev_priv->saveFPA1 = I915_READ(PCH_FPA1); + dev_priv->saveDPLL_A = I915_READ(PCH_DPLL_A); + } else { + dev_priv->saveFPA0 = I915_READ(FPA0); + dev_priv->saveFPA1 = I915_READ(FPA1); + dev_priv->saveDPLL_A = I915_READ(DPLL_A); + } + if (IS_I965G(dev) && !IS_IGDNG(dev)) dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD); dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A); dev_priv->saveHBLANK_A = I915_READ(HBLANK_A); @@ -243,7 +259,24 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A); dev_priv->saveVBLANK_A = I915_READ(VBLANK_A); dev_priv->saveVSYNC_A = I915_READ(VSYNC_A); - dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + if (!IS_IGDNG(dev)) + dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + + if (IS_IGDNG(dev)) { + dev_priv->saveFDI_TXA_CTL = I915_READ(FDI_TXA_CTL); + dev_priv->saveFDI_RXA_CTL = I915_READ(FDI_RXA_CTL); + + dev_priv->savePFA_CTL_1 = I915_READ(PFA_CTL_1); + dev_priv->savePFA_WIN_SZ = I915_READ(PFA_WIN_SZ); + dev_priv->savePFA_WIN_POS = I915_READ(PFA_WIN_POS); + + dev_priv->saveTRANS_HTOTAL_A = I915_READ(TRANS_HTOTAL_A); + dev_priv->saveTRANS_HBLANK_A = I915_READ(TRANS_HBLANK_A); + dev_priv->saveTRANS_HSYNC_A = I915_READ(TRANS_HSYNC_A); + dev_priv->saveTRANS_VTOTAL_A = I915_READ(TRANS_VTOTAL_A); + dev_priv->saveTRANS_VBLANK_A = I915_READ(TRANS_VBLANK_A); + dev_priv->saveTRANS_VSYNC_A = I915_READ(TRANS_VSYNC_A); + } dev_priv->saveDSPACNTR = I915_READ(DSPACNTR); dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE); @@ -260,10 +293,16 @@ static void i915_save_modeset_reg(struct drm_device *dev) /* Pipe & plane B info */ dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF); dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC); - dev_priv->saveFPB0 = I915_READ(FPB0); - dev_priv->saveFPB1 = I915_READ(FPB1); - dev_priv->saveDPLL_B = I915_READ(DPLL_B); - if (IS_I965G(dev)) + if (IS_IGDNG(dev)) { + dev_priv->saveFPB0 = I915_READ(PCH_FPB0); + dev_priv->saveFPB1 = I915_READ(PCH_FPB1); + dev_priv->saveDPLL_B = I915_READ(PCH_DPLL_B); + } else { + dev_priv->saveFPB0 = I915_READ(FPB0); + dev_priv->saveFPB1 = I915_READ(FPB1); + dev_priv->saveDPLL_B = I915_READ(DPLL_B); + } + if (IS_I965G(dev) && !IS_IGDNG(dev)) dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD); dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B); dev_priv->saveHBLANK_B = I915_READ(HBLANK_B); @@ -271,7 +310,24 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B); dev_priv->saveVBLANK_B = I915_READ(VBLANK_B); dev_priv->saveVSYNC_B = I915_READ(VSYNC_B); - dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); + if (!IS_IGDNG(dev)) + dev_priv->saveBCLRPAT_B = I915_READ(BCLRPAT_B); + + if (IS_IGDNG(dev)) { + dev_priv->saveFDI_TXB_CTL = I915_READ(FDI_TXB_CTL); + dev_priv->saveFDI_RXB_CTL = I915_READ(FDI_RXB_CTL); + + dev_priv->savePFB_CTL_1 = I915_READ(PFB_CTL_1); + dev_priv->savePFB_WIN_SZ = I915_READ(PFB_WIN_SZ); + dev_priv->savePFB_WIN_POS = I915_READ(PFB_WIN_POS); + + dev_priv->saveTRANS_HTOTAL_B = I915_READ(TRANS_HTOTAL_B); + dev_priv->saveTRANS_HBLANK_B = I915_READ(TRANS_HBLANK_B); + dev_priv->saveTRANS_HSYNC_B = I915_READ(TRANS_HSYNC_B); + dev_priv->saveTRANS_VTOTAL_B = I915_READ(TRANS_VTOTAL_B); + dev_priv->saveTRANS_VBLANK_B = I915_READ(TRANS_VBLANK_B); + dev_priv->saveTRANS_VSYNC_B = I915_READ(TRANS_VSYNC_B); + } dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR); dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE); @@ -290,23 +346,41 @@ static void i915_save_modeset_reg(struct drm_device *dev) static void i915_restore_modeset_reg(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + int dpll_a_reg, fpa0_reg, fpa1_reg; + int dpll_b_reg, fpb0_reg, fpb1_reg; if (drm_core_check_feature(dev, DRIVER_MODESET)) return; + if (IS_IGDNG(dev)) { + dpll_a_reg = PCH_DPLL_A; + dpll_b_reg = PCH_DPLL_B; + fpa0_reg = PCH_FPA0; + fpb0_reg = PCH_FPB0; + fpa1_reg = PCH_FPA1; + fpb1_reg = PCH_FPB1; + } else { + dpll_a_reg = DPLL_A; + dpll_b_reg = DPLL_B; + fpa0_reg = FPA0; + fpb0_reg = FPB0; + fpa1_reg = FPA1; + fpb1_reg = FPB1; + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A & + I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A & ~DPLL_VCO_ENABLE); DRM_UDELAY(150); } - I915_WRITE(FPA0, dev_priv->saveFPA0); - I915_WRITE(FPA1, dev_priv->saveFPA1); + I915_WRITE(fpa0_reg, dev_priv->saveFPA0); + I915_WRITE(fpa1_reg, dev_priv->saveFPA1); /* Actually enable it */ - I915_WRITE(DPLL_A, dev_priv->saveDPLL_A); + I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A); DRM_UDELAY(150); - if (IS_I965G(dev)) + if (IS_I965G(dev) && !IS_IGDNG(dev)) I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD); DRM_UDELAY(150); @@ -317,7 +391,24 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A); I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A); I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A); - I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + if (!IS_IGDNG(dev)) + I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); + + if (IS_IGDNG(dev)) { + I915_WRITE(FDI_RXA_CTL, dev_priv->saveFDI_RXA_CTL); + I915_WRITE(FDI_TXA_CTL, dev_priv->saveFDI_TXA_CTL); + + I915_WRITE(PFA_CTL_1, dev_priv->savePFA_CTL_1); + I915_WRITE(PFA_WIN_SZ, dev_priv->savePFA_WIN_SZ); + I915_WRITE(PFA_WIN_POS, dev_priv->savePFA_WIN_POS); + + I915_WRITE(TRANS_HTOTAL_A, dev_priv->saveTRANS_HTOTAL_A); + I915_WRITE(TRANS_HBLANK_A, dev_priv->saveTRANS_HBLANK_A); + I915_WRITE(TRANS_HSYNC_A, dev_priv->saveTRANS_HSYNC_A); + I915_WRITE(TRANS_VTOTAL_A, dev_priv->saveTRANS_VTOTAL_A); + I915_WRITE(TRANS_VBLANK_A, dev_priv->saveTRANS_VBLANK_A); + I915_WRITE(TRANS_VSYNC_A, dev_priv->saveTRANS_VSYNC_A); + } /* Restore plane info */ I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE); @@ -339,14 +430,14 @@ static void i915_restore_modeset_reg(struct drm_device *dev) /* Pipe & plane B info */ if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) { - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B & + I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B & ~DPLL_VCO_ENABLE); DRM_UDELAY(150); } - I915_WRITE(FPB0, dev_priv->saveFPB0); - I915_WRITE(FPB1, dev_priv->saveFPB1); + I915_WRITE(fpb0_reg, dev_priv->saveFPB0); + I915_WRITE(fpb1_reg, dev_priv->saveFPB1); /* Actually enable it */ - I915_WRITE(DPLL_B, dev_priv->saveDPLL_B); + I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B); DRM_UDELAY(150); if (IS_I965G(dev)) I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); @@ -359,7 +450,24 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B); I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B); I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B); - I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + if (!IS_IGDNG(dev)) + I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); + + if (IS_IGDNG(dev)) { + I915_WRITE(FDI_RXB_CTL, dev_priv->saveFDI_RXB_CTL); + I915_WRITE(FDI_TXB_CTL, dev_priv->saveFDI_TXB_CTL); + + I915_WRITE(PFB_CTL_1, dev_priv->savePFB_CTL_1); + I915_WRITE(PFB_WIN_SZ, dev_priv->savePFB_WIN_SZ); + I915_WRITE(PFB_WIN_POS, dev_priv->savePFB_WIN_POS); + + I915_WRITE(TRANS_HTOTAL_B, dev_priv->saveTRANS_HTOTAL_B); + I915_WRITE(TRANS_HBLANK_B, dev_priv->saveTRANS_HBLANK_B); + I915_WRITE(TRANS_HSYNC_B, dev_priv->saveTRANS_HSYNC_B); + I915_WRITE(TRANS_VTOTAL_B, dev_priv->saveTRANS_VTOTAL_B); + I915_WRITE(TRANS_VBLANK_B, dev_priv->saveTRANS_VBLANK_B); + I915_WRITE(TRANS_VSYNC_B, dev_priv->saveTRANS_VSYNC_B); + } /* Restore plane info */ I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE); @@ -404,22 +512,43 @@ void i915_save_display(struct drm_device *dev) dev_priv->saveCURSIZE = I915_READ(CURSIZE); /* CRT state */ - dev_priv->saveADPA = I915_READ(ADPA); + if (IS_IGDNG(dev)) { + dev_priv->saveADPA = I915_READ(PCH_ADPA); + } else { + dev_priv->saveADPA = I915_READ(ADPA); + } /* LVDS state */ - dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); - dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); - dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); - dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL); - if (IS_I965G(dev)) - dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); - if (IS_MOBILE(dev) && !IS_I830(dev)) - dev_priv->saveLVDS = I915_READ(LVDS); - if (!IS_I830(dev) && !IS_845G(dev)) + if (IS_IGDNG(dev)) { + dev_priv->savePP_CONTROL = I915_READ(PCH_PP_CONTROL); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1); + dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2); + dev_priv->saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL); + dev_priv->saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2); + dev_priv->saveLVDS = I915_READ(PCH_LVDS); + } else { + dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL); + dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS); + dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL); + dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL); + if (IS_I965G(dev)) + dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); + if (IS_MOBILE(dev) && !IS_I830(dev)) + dev_priv->saveLVDS = I915_READ(LVDS); + } + + if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev)) dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL); - dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS); - dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); - dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + + if (IS_IGDNG(dev)) { + dev_priv->savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS); + dev_priv->savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS); + dev_priv->savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR); + } else { + dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS); + dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS); + dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR); + } /* Display Port state */ if (SUPPORTS_INTEGRATED_DP(dev)) { @@ -451,7 +580,10 @@ void i915_save_display(struct drm_device *dev) dev_priv->saveVGA0 = I915_READ(VGA0); dev_priv->saveVGA1 = I915_READ(VGA1); dev_priv->saveVGA_PD = I915_READ(VGA_PD); - dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); + if (IS_IGDNG(dev)) + dev_priv->saveVGACNTRL = I915_READ(CPU_VGACNTRL); + else + dev_priv->saveVGACNTRL = I915_READ(VGACNTRL); i915_save_vga(dev); } @@ -490,23 +622,41 @@ void i915_restore_display(struct drm_device *dev) I915_WRITE(CURSIZE, dev_priv->saveCURSIZE); /* CRT state */ - I915_WRITE(ADPA, dev_priv->saveADPA); + if (IS_IGDNG(dev)) + I915_WRITE(PCH_ADPA, dev_priv->saveADPA); + else + I915_WRITE(ADPA, dev_priv->saveADPA); /* LVDS state */ - if (IS_I965G(dev)) + if (IS_I965G(dev) && !IS_IGDNG(dev)) I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2); - if (IS_MOBILE(dev) && !IS_I830(dev)) + + if (IS_IGDNG(dev)) { + I915_WRITE(PCH_LVDS, dev_priv->saveLVDS); + } else if (IS_MOBILE(dev) && !IS_I830(dev)) I915_WRITE(LVDS, dev_priv->saveLVDS); - if (!IS_I830(dev) && !IS_845G(dev)) + + if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev)) I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL); - I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); - I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); - I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL); - I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); - I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); - I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); - I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + if (IS_IGDNG(dev)) { + I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2); + I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL); + I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2); + I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); + I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); + I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR); + I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL); + } else { + I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS); + I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL); + I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL); + I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS); + I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS); + I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR); + I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL); + } /* Display Port state */ if (SUPPORTS_INTEGRATED_DP(dev)) { @@ -529,7 +679,10 @@ void i915_restore_display(struct drm_device *dev) } /* VGA state */ - I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); + if (IS_IGDNG(dev)) + I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL); + else + I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL); I915_WRITE(VGA0, dev_priv->saveVGA0); I915_WRITE(VGA1, dev_priv->saveVGA1); I915_WRITE(VGA_PD, dev_priv->saveVGA_PD); @@ -555,8 +708,17 @@ int i915_save_state(struct drm_device *dev) i915_save_display(dev); /* Interrupt state */ - dev_priv->saveIER = I915_READ(IER); - dev_priv->saveIMR = I915_READ(IMR); + if (IS_IGDNG(dev)) { + dev_priv->saveDEIER = I915_READ(DEIER); + dev_priv->saveDEIMR = I915_READ(DEIMR); + dev_priv->saveGTIER = I915_READ(GTIER); + dev_priv->saveGTIMR = I915_READ(GTIMR); + dev_priv->saveFDI_RXA_IMR = I915_READ(FDI_RXA_IMR); + dev_priv->saveFDI_RXB_IMR = I915_READ(FDI_RXB_IMR); + } else { + dev_priv->saveIER = I915_READ(IER); + dev_priv->saveIMR = I915_READ(IMR); + } /* Clock gating state */ dev_priv->saveD_STATE = I915_READ(D_STATE); @@ -621,8 +783,17 @@ int i915_restore_state(struct drm_device *dev) i915_restore_display(dev); /* Interrupt state */ - I915_WRITE (IER, dev_priv->saveIER); - I915_WRITE (IMR, dev_priv->saveIMR); + if (IS_IGDNG(dev)) { + I915_WRITE(DEIER, dev_priv->saveDEIER); + I915_WRITE(DEIMR, dev_priv->saveDEIMR); + I915_WRITE(GTIER, dev_priv->saveGTIER); + I915_WRITE(GTIMR, dev_priv->saveGTIMR); + I915_WRITE(FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR); + I915_WRITE(FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR); + } else { + I915_WRITE (IER, dev_priv->saveIER); + I915_WRITE (IMR, dev_priv->saveIMR); + } /* Clock gating state */ I915_WRITE (D_STATE, dev_priv->saveD_STATE); -- GitLab From 52567b03ca38b6e556ced450d64dba8d66e23b0e Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 23 Oct 2009 14:46:42 -0400 Subject: [PATCH 0162/1165] NFSv4: Fix a bug when the server returns NFS4ERR_RESOURCE RFC 3530 states that when we recieve the error NFS4ERR_RESOURCE, we are not supposed to bump the sequence number on OPEN, LOCK, LOCKU, CLOSE, etc operations. The problem is that we map that error into EREMOTEIO in the XDR layer, and so the NFSv4 middle-layer routines like seqid_mutating_err(), and nfs_increment_seqid() don't recognise it. The fix is to defer the mapping until after the middle layers have processed the error. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 11 ++++++++--- fs/nfs/nfs4xdr.c | 1 - 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ed7c269e251..65c25279886 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -72,12 +72,17 @@ static int _nfs4_proc_getattr(struct nfs_server *server, struct nfs_fh *fhandle, /* Prevent leaks of NFSv4 errors into userland */ static int nfs4_map_errors(int err) { - if (err < -1000) { + if (err >= -1000) + return err; + switch (err) { + case -NFS4ERR_RESOURCE: + return -EREMOTEIO; + default: dprintk("%s could not handle NFSv4 error %d\n", __func__, -err); - return -EIO; + break; } - return err; + return -EIO; } /* diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 83ad47cbdd8..20b4e30e6c8 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -5681,7 +5681,6 @@ static struct { { NFS4ERR_SERVERFAULT, -ESERVERFAULT }, { NFS4ERR_BADTYPE, -EBADTYPE }, { NFS4ERR_LOCKED, -EAGAIN }, - { NFS4ERR_RESOURCE, -EREMOTEIO }, { NFS4ERR_SYMLINK, -ELOOP }, { NFS4ERR_OP_ILLEGAL, -EOPNOTSUPP }, { NFS4ERR_DEADLOCK, -EDEADLK }, -- GitLab From f685ceacab07d3f6c236f04803e2f2f0dbcc5afb Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Fri, 23 Oct 2009 23:09:22 +0200 Subject: [PATCH 0163/1165] sched: Strengthen buddies and mitigate buddy induced latencies This patch restores the effectiveness of LAST_BUDDY in preventing pgsql+oltp from collapsing due to wakeup preemption. It also switches LAST_BUDDY to exclusively do what it does best, namely mitigate the effects of aggressive wakeup preemption, which improves vmark throughput markedly, and restores mysql+oltp scalability. Since buddies are about scalability, enable them beginning at the point where we begin expanding sched_latency, namely sched_nr_latency. Previously, buddies were cleared aggressively, which seriously reduced their effectiveness. Not clearing aggressively however, produces a small drop in mysql+oltp throughput immediately after peak, indicating that LAST_BUDDY is actually doing some harm. This is right at the point where X on the desktop in competition with another load wants low latency service. Ergo, do not enable until we need to scale. To mitigate latency induced by buddies, or by a task just missing wakeup preemption, check latency at tick time. Last hunk prevents buddies from stymieing BALANCE_NEWIDLE via CACHE_HOT_BUDDY. Supporting performance tests: tip = v2.6.32-rc5-1497-ga525b32 tipx = NO_GENTLE_FAIR_SLEEPERS NEXT_BUDDY granularity knobs = 31 knobs + 31 buddies tip+x = NO_GENTLE_FAIR_SLEEPERS granularity knobs = 31 knobs (Three run averages except where noted.) vmark: ------ tip 108466 messages per second tip+ 125307 messages per second tip+x 125335 messages per second tipx 117781 messages per second 2.6.31.3 122729 messages per second mysql+oltp: ----------- clients 1 2 4 8 16 32 64 128 256 .......................................................................................... tip 9949.89 18690.20 34801.24 34460.04 32682.88 30765.97 28305.27 25059.64 19548.08 tip+ 10013.90 18526.84 34900.38 34420.14 33069.83 32083.40 30578.30 28010.71 25605.47 tipx 9698.71 18002.70 34477.56 33420.01 32634.30 31657.27 29932.67 26827.52 21487.18 2.6.31.3 8243.11 18784.20 34404.83 33148.38 31900.32 31161.90 29663.81 25995.94 18058.86 pgsql+oltp: ----------- clients 1 2 4 8 16 32 64 128 256 .......................................................................................... tip 13686.37 26609.25 51934.28 51347.81 49479.51 45312.65 36691.91 26851.57 24145.35 tip+ (1x) 13907.85 27135.87 52951.98 52514.04 51742.52 50705.43 49947.97 48374.19 46227.94 tip+x 13906.78 27065.81 52951.19 52542.59 52176.11 51815.94 50838.90 49439.46 46891.00 tipx 13742.46 26769.81 52351.99 51891.73 51320.79 50938.98 50248.65 48908.70 46553.84 2.6.31.3 13815.35 26906.46 52683.34 52061.31 51937.10 51376.80 50474.28 49394.47 47003.25 Signed-off-by: Mike Galbraith Cc: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- kernel/sched_fair.c | 73 +++++++++++++++++++++++++++++---------------- 2 files changed, 48 insertions(+), 27 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index 789001da0a9..cae6700bedb 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -2008,7 +2008,7 @@ task_hot(struct task_struct *p, u64 now, struct sched_domain *sd) /* * Buddy candidates are cache hot: */ - if (sched_feat(CACHE_HOT_BUDDY) && + if (sched_feat(CACHE_HOT_BUDDY) && this_rq()->nr_running && (&p->se == cfs_rq_of(&p->se)->next || &p->se == cfs_rq_of(&p->se)->last)) return 1; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index c32c3e643da..37087a7fac2 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -822,6 +822,26 @@ check_preempt_tick(struct cfs_rq *cfs_rq, struct sched_entity *curr) * re-elected due to buddy favours. */ clear_buddies(cfs_rq, curr); + return; + } + + /* + * Ensure that a task that missed wakeup preemption by a + * narrow margin doesn't have to wait for a full slice. + * This also mitigates buddy induced latencies under load. + */ + if (!sched_feat(WAKEUP_PREEMPT)) + return; + + if (delta_exec < sysctl_sched_min_granularity) + return; + + if (cfs_rq->nr_running > 1) { + struct sched_entity *se = __pick_next_entity(cfs_rq); + s64 delta = curr->vruntime - se->vruntime; + + if (delta > ideal_runtime) + resched_task(rq_of(cfs_rq)->curr); } } @@ -861,21 +881,18 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se); static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq) { struct sched_entity *se = __pick_next_entity(cfs_rq); - struct sched_entity *buddy; + struct sched_entity *left = se; - if (cfs_rq->next) { - buddy = cfs_rq->next; - cfs_rq->next = NULL; - if (wakeup_preempt_entity(buddy, se) < 1) - return buddy; - } + if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, left) < 1) + se = cfs_rq->next; - if (cfs_rq->last) { - buddy = cfs_rq->last; - cfs_rq->last = NULL; - if (wakeup_preempt_entity(buddy, se) < 1) - return buddy; - } + /* + * Prefer last buddy, try to return the CPU to a preempted task. + */ + if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, left) < 1) + se = cfs_rq->last; + + clear_buddies(cfs_rq, se); return se; } @@ -1577,6 +1594,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_ struct sched_entity *se = &curr->se, *pse = &p->se; struct cfs_rq *cfs_rq = task_cfs_rq(curr); int sync = wake_flags & WF_SYNC; + int scale = cfs_rq->nr_running >= sched_nr_latency; update_curr(cfs_rq); @@ -1591,18 +1609,7 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_ if (unlikely(se == pse)) return; - /* - * Only set the backward buddy when the current task is still on the - * rq. This can happen when a wakeup gets interleaved with schedule on - * the ->pre_schedule() or idle_balance() point, either of which can - * drop the rq lock. - * - * Also, during early boot the idle thread is in the fair class, for - * obvious reasons its a bad idea to schedule back to the idle thread. - */ - if (sched_feat(LAST_BUDDY) && likely(se->on_rq && curr != rq->idle)) - set_last_buddy(se); - if (sched_feat(NEXT_BUDDY) && !(wake_flags & WF_FORK)) + if (sched_feat(NEXT_BUDDY) && scale && !(wake_flags & WF_FORK)) set_next_buddy(pse); /* @@ -1648,8 +1655,22 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_ BUG_ON(!pse); - if (wakeup_preempt_entity(se, pse) == 1) + if (wakeup_preempt_entity(se, pse) == 1) { resched_task(curr); + /* + * Only set the backward buddy when the current task is still + * on the rq. This can happen when a wakeup gets interleaved + * with schedule on the ->pre_schedule() or idle_balance() + * point, either of which can * drop the rq lock. + * + * Also, during early boot the idle thread is in the fair class, + * for obvious reasons its a bad idea to schedule back to it. + */ + if (unlikely(!se->on_rq || curr == rq->idle)) + return; + if (sched_feat(LAST_BUDDY) && scale && entity_is_task(se)) + set_last_buddy(se); + } } static struct task_struct *pick_next_task_fair(struct rq *rq) -- GitLab From cf8517cf905b5cd31d5790250b9ac39f7cb8aa53 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Fri, 23 Oct 2009 19:36:16 -0400 Subject: [PATCH 0164/1165] tracing: Update *ppos instead of filp->f_pos Instead of directly updating filp->f_pos we should update the *ppos argument. The filp->f_pos gets updated within the file_pos_write() function called from sys_write(). Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20091023233646.399670810@goodmis.org> Signed-off-by: Ingo Molnar --- kernel/trace/ftrace.c | 2 +- kernel/trace/trace.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 37ba67e3326..9c451a1930b 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -740,7 +740,7 @@ ftrace_profile_write(struct file *filp, const char __user *ubuf, out: mutex_unlock(&ftrace_profile_lock); - filp->f_pos += cnt; + *ppos += cnt; return cnt; } diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index c820b0310a1..b20d3ec75de 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2440,7 +2440,7 @@ tracing_trace_options_write(struct file *filp, const char __user *ubuf, return ret; } - filp->f_pos += cnt; + *ppos += cnt; return cnt; } @@ -2582,7 +2582,7 @@ tracing_ctrl_write(struct file *filp, const char __user *ubuf, } mutex_unlock(&trace_types_lock); - filp->f_pos += cnt; + *ppos += cnt; return cnt; } @@ -2764,7 +2764,7 @@ tracing_set_trace_write(struct file *filp, const char __user *ubuf, if (err) return err; - filp->f_pos += ret; + *ppos += ret; return ret; } @@ -3299,7 +3299,7 @@ tracing_entries_write(struct file *filp, const char __user *ubuf, } } - filp->f_pos += cnt; + *ppos += cnt; /* If check pages failed, return ENOMEM */ if (tracing_disabled) -- GitLab From 3e69533b51930a7169235db2caf703884e6e3bbb Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Fri, 23 Oct 2009 19:36:17 -0400 Subject: [PATCH 0165/1165] tracing: Fix trace_seq_printf() return value trace_seq_printf() return value is a little ambiguous. It currently returns the length of the space available in the buffer. printf usually returns the amount written. This is not adequate here, because: trace_seq_printf(s, ""); is perfectly legal, and returning 0 would indicate that it failed. We can always see the amount written by looking at the before and after values of s->len. This is not quite the same use as printf. We only care if the string was successfully written to the buffer or not. Make trace_seq_printf() return 0 if the trace oversizes the buffer's free space, 1 otherwise. Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20091023233646.631787612@goodmis.org> Signed-off-by: Ingo Molnar --- kernel/trace/trace_output.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index ed17565826b..b6c12c6a1bc 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -69,6 +69,9 @@ enum print_line_t trace_print_printk_msg_only(struct trace_iterator *iter) * @s: trace sequence descriptor * @fmt: printf format string * + * It returns 0 if the trace oversizes the buffer's free + * space, 1 otherwise. + * * The tracer may use either sequence operations or its own * copy to user routines. To simplify formating of a trace * trace_seq_printf is used to store strings into a special @@ -95,7 +98,7 @@ trace_seq_printf(struct trace_seq *s, const char *fmt, ...) s->len += ret; - return len; + return 1; } EXPORT_SYMBOL_GPL(trace_seq_printf); -- GitLab From 67b394f7f26d84edb7294cc6528ab7ca6daa2ad1 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Fri, 23 Oct 2009 19:36:18 -0400 Subject: [PATCH 0166/1165] tracing: Fix comment typo and documentation example Trivial patch to fix a documentation example and to fix a comment. Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20091023233646.871719877@goodmis.org> Signed-off-by: Ingo Molnar --- Documentation/trace/ftrace.txt | 2 ++ kernel/trace/ring_buffer.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/trace/ftrace.txt b/Documentation/trace/ftrace.txt index 957b22fde2d..8179692fbb9 100644 --- a/Documentation/trace/ftrace.txt +++ b/Documentation/trace/ftrace.txt @@ -1231,6 +1231,7 @@ something like this simple program: #include #include #include +#include #define _STR(x) #x #define STR(x) _STR(x) @@ -1265,6 +1266,7 @@ const char *find_debugfs(void) return NULL; } + strcat(debugfs, "/tracing/"); debugfs_found = 1; return debugfs; diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index d4ff0197054..217f6991184 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2681,7 +2681,7 @@ unsigned long ring_buffer_entries(struct ring_buffer *buffer) EXPORT_SYMBOL_GPL(ring_buffer_entries); /** - * ring_buffer_overrun_cpu - get the number of overruns in buffer + * ring_buffer_overruns - get the number of overruns in buffer * @buffer: The ring buffer * * Returns the total number of overruns in the ring buffer -- GitLab From 6d3f1e12f46a2f9a1bb7e7aa433df8dd31ce5647 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Fri, 23 Oct 2009 19:36:19 -0400 Subject: [PATCH 0167/1165] tracing: Remove cpu arg from the rb_time_stamp() function The cpu argument is not used inside the rb_time_stamp() function. Plus fix a typo. Signed-off-by: Jiri Olsa Signed-off-by: Steven Rostedt Cc: Frederic Weisbecker LKML-Reference: <20091023233647.118547500@goodmis.org> Signed-off-by: Ingo Molnar --- include/linux/trace_seq.h | 2 +- kernel/trace/ring_buffer.c | 10 +++++----- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/linux/trace_seq.h b/include/linux/trace_seq.h index c134dd1fe6b..09077f6ed12 100644 --- a/include/linux/trace_seq.h +++ b/include/linux/trace_seq.h @@ -7,7 +7,7 @@ /* * Trace sequences are used to allow a function to call several other functions - * to create a string of data to use (up to a max of PAGE_SIZE. + * to create a string of data to use (up to a max of PAGE_SIZE). */ struct trace_seq { diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 217f6991184..3ffa502fb24 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -483,7 +483,7 @@ struct ring_buffer_iter { /* Up this if you want to test the TIME_EXTENTS and normalization */ #define DEBUG_SHIFT 0 -static inline u64 rb_time_stamp(struct ring_buffer *buffer, int cpu) +static inline u64 rb_time_stamp(struct ring_buffer *buffer) { /* shift to debug/test normalization and TIME_EXTENTS */ return buffer->clock() << DEBUG_SHIFT; @@ -494,7 +494,7 @@ u64 ring_buffer_time_stamp(struct ring_buffer *buffer, int cpu) u64 time; preempt_disable_notrace(); - time = rb_time_stamp(buffer, cpu); + time = rb_time_stamp(buffer); preempt_enable_no_resched_notrace(); return time; @@ -599,7 +599,7 @@ static struct list_head *rb_list_head(struct list_head *list) } /* - * rb_is_head_page - test if the give page is the head page + * rb_is_head_page - test if the given page is the head page * * Because the reader may move the head_page pointer, we can * not trust what the head page is (it may be pointing to @@ -1868,7 +1868,7 @@ rb_move_tail(struct ring_buffer_per_cpu *cpu_buffer, * Nested commits always have zero deltas, so * just reread the time stamp */ - *ts = rb_time_stamp(buffer, cpu_buffer->cpu); + *ts = rb_time_stamp(buffer); next_page->page->time_stamp = *ts; } @@ -2111,7 +2111,7 @@ rb_reserve_next_event(struct ring_buffer *buffer, if (RB_WARN_ON(cpu_buffer, ++nr_loops > 1000)) goto out_fail; - ts = rb_time_stamp(cpu_buffer->buffer, cpu_buffer->cpu); + ts = rb_time_stamp(cpu_buffer->buffer); /* * Only the first commit can update the timestamp. -- GitLab From 57784dfa82fe032cf64613e154f3ae8748e3fa3d Mon Sep 17 00:00:00 2001 From: Huaxu Wan Date: Sat, 24 Oct 2009 13:28:45 +0200 Subject: [PATCH 0168/1165] hwmon: (coretemp) Maintainer update Intel will help maintaining the coretemp driver. Signed-off-by: Jean Delvare --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 88241154f4c..46a18efc4ed 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1480,6 +1480,7 @@ F: mm/*cgroup* CORETEMP HARDWARE MONITORING DRIVER M: Rudolf Marek +M: Huaxu Wan L: lm-sensors@lm-sensors.org S: Maintained F: Documentation/hwmon/coretemp -- GitLab From c7702c31340f84cfd5e5df22293578b7ae1e9370 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 24 Oct 2009 13:28:45 +0200 Subject: [PATCH 0169/1165] hwmon: (fschmd) Fix check on unsigned in watchdog_write() If unsigned the watchdog_trigger() return value will not be checked correctly. Signed-off-by: Roel Kluin Acked-by: Andrew Morton Cc: Hans de Goede Signed-off-by: Jean Delvare --- drivers/hwmon/fschmd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c index 2a7a85a6dc3..da1b1f9488a 100644 --- a/drivers/hwmon/fschmd.c +++ b/drivers/hwmon/fschmd.c @@ -819,7 +819,7 @@ static int watchdog_release(struct inode *inode, struct file *filp) static ssize_t watchdog_write(struct file *filp, const char __user *buf, size_t count, loff_t *offset) { - size_t ret; + int ret; struct fschmd_data *data = filp->private_data; if (count) { -- GitLab From 9d0914468fdf66d61a57e7c074b17a28eed4d3dd Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 24 Oct 2009 13:28:46 +0200 Subject: [PATCH 0170/1165] hwmon: (dme1737) No vid attributes for SCH311x The SCH311x chips do not have VID inputs, so the cpu0_vid and vrm attributes shouldn't be created for them. This fixes lm-sensors ticket #2353: http://www.lm-sensors.org/ticket/2353 Signed-off-by: Jean Delvare Tested-by: Udo van den Heuvel Cc: Juerg Haefliger --- drivers/hwmon/dme1737.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c index 2c2cb1ec94c..27d62574284 100644 --- a/drivers/hwmon/dme1737.c +++ b/drivers/hwmon/dme1737.c @@ -572,7 +572,7 @@ static struct dme1737_data *dme1737_update_device(struct device *dev) /* Sample register contents every 1 sec */ if (time_after(jiffies, data->last_update + HZ) || !data->valid) { - if (data->type != sch5027) { + if (data->type == dme1737) { data->vid = dme1737_read(data, DME1737_REG_VID) & 0x3f; } @@ -1621,9 +1621,6 @@ static struct attribute *dme1737_misc_attr[] = { &sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr, &sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr, - /* Misc */ - &dev_attr_vrm.attr, - &dev_attr_cpu0_vid.attr, NULL }; @@ -1631,6 +1628,18 @@ static const struct attribute_group dme1737_misc_group = { .attrs = dme1737_misc_attr, }; +/* The following struct holds VID-related attributes. Their creation + depends on the chip type which is determined during module load. */ +static struct attribute *dme1737_vid_attr[] = { + &dev_attr_vrm.attr, + &dev_attr_cpu0_vid.attr, + NULL +}; + +static const struct attribute_group dme1737_vid_group = { + .attrs = dme1737_vid_attr, +}; + /* The following structs hold the PWM attributes, some of which are optional. * Their creation depends on the chip configuration which is determined during * module load. */ @@ -1902,6 +1911,9 @@ static void dme1737_remove_files(struct device *dev) if (data->type != sch5027) { sysfs_remove_group(&dev->kobj, &dme1737_misc_group); } + if (data->type == dme1737) { + sysfs_remove_group(&dev->kobj, &dme1737_vid_group); + } sysfs_remove_group(&dev->kobj, &dme1737_group); @@ -1933,6 +1945,13 @@ static int dme1737_create_files(struct device *dev) goto exit_remove; } + /* Create VID-related sysfs attributes */ + if ((data->type == dme1737) && + (err = sysfs_create_group(&dev->kobj, + &dme1737_vid_group))) { + goto exit_remove; + } + /* Create fan sysfs attributes */ for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) { if (data->has_fan & (1 << ix)) { @@ -2127,7 +2146,7 @@ static int dme1737_init_device(struct device *dev) data->pwm_acz[2] = 4; /* pwm3 -> zone3 */ /* Set VRM */ - if (data->type != sch5027) { + if (data->type == dme1737) { data->vrm = vid_which_vrm(); } -- GitLab From 371dc4a6d8c3c74a9a1c74b87c2affb3fcef6500 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 24 Oct 2009 13:28:47 +0200 Subject: [PATCH 0171/1165] hwmon: (it87) Fix VID reading on IT8718F/IT8720F Comparing apples to bananas doesn't seem right. Consistently use the chips enum for chip type comparisons, to avoid such bugs in the future. The bug has been there since support for the IT8718F was added, so VID never worked for this chip nor for the similar IT8720F. Signed-off-by: Jean Delvare --- drivers/hwmon/it87.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index ffeb2a10e1a..a3749cb0f18 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -1028,12 +1028,11 @@ static int __init it87_find(unsigned short *address, chip_type, *address, sio_data->revision); /* Read GPIO config and VID value from LDN 7 (GPIO) */ - if (chip_type != IT8705F_DEVID) { + if (sio_data->type != it87) { int reg; superio_select(GPIO); - if ((chip_type == it8718) || - (chip_type == it8720)) + if (sio_data->type == it8718 || sio_data->type == it8720) sio_data->vid_value = superio_inb(IT87_SIO_VID_REG); reg = superio_inb(IT87_SIO_PINX2_REG); -- GitLab From 6cafb12dc85a5bdc722791cc5070968413264909 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sat, 24 Oct 2009 14:14:31 +0200 Subject: [PATCH 0172/1165] block: silently error unsupported empty barriers too With 2.6.32-rc5 in a KVM guest using dm and virtio_blk, we see the following errors: end_request: I/O error, dev vda, sector 0 end_request: I/O error, dev vda, sector 0 The errors go away if dm stops submitting empty barriers, by reverting: commit 52b1fd5a27c625c78373e024bf570af3c9d44a79 Author: Mikulas Patocka dm: send empty barriers to targets in dm_flush We should silently error all barriers, even empty barriers, on devices like virtio_blk which don't support them. See also: https://bugzilla.redhat.com/514901 Signed-off-by: Mark McLoughlin Signed-off-by: Mike Snitzer Acked-by: Alasdair G Kergon Acked-by: Mikulas Patocka Cc: Rusty Russell Cc: Neil Brown Cc: Christoph Hellwig Signed-off-by: Jens Axboe --- block/blk-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/blk-core.c b/block/blk-core.c index ac0fa10f8fa..71da5111120 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1161,7 +1161,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK; int rw_flags; - if (bio_rw_flagged(bio, BIO_RW_BARRIER) && bio_has_data(bio) && + if (bio_rw_flagged(bio, BIO_RW_BARRIER) && (q->next_ordered == QUEUE_ORDERED_NONE)) { bio_endio(bio, -EOPNOTSUPP); return 0; -- GitLab From 05af2142d09845de2f4ae34181c72addd72d5ef9 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Sat, 24 Oct 2009 06:47:33 -0700 Subject: [PATCH 0173/1165] r8169: fix Ethernet Hangup for RTL8110SC rev d The 8110SC rev d chip on our board shows a regression which the 8110SB chip did not have. When inbound traffic is overflowing the receive descriptor queue, "holes" in the ring buffer may occur which lead to a hangup until the buffer is filled again. The packets are than completely processed, but the ring remains porous and no packets are processed until the next overflow. Setting the interface down and up can fix the problem temporary from userspace. For some reason we don't know, this behaviour is not occuring if the RxVlan bit for hardware VLAN untagging is set. There is another "Work around for AMD plateform" in the current code which checks the VLAN status word in receive descriptors, but does never come to effect when hardware VLAN support is enabled. We assume that this is a bug in the chip. The following patch fixes the problem. Without the patch we could reproduce the hang within minutes (given other devices also generating lots of interrupts), without we couldn't reproduce within a few days of long term testing. This version contains minor style adjustments and is sent with mutt which will hopefully not destroy the formatting again. Signed-off-by: Bernhard Schmidt Signed-off-by: Simon Wunderlich Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/r8169.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 83c47d95c3a..f98ef523f52 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -1029,7 +1029,10 @@ static void rtl8169_vlan_rx_register(struct net_device *dev, spin_lock_irqsave(&tp->lock, flags); tp->vlgrp = grp; - if (tp->vlgrp) + /* + * Do not disable RxVlan on 8110SCd. + */ + if (tp->vlgrp || (tp->mac_version == RTL_GIGA_MAC_VER_05)) tp->cp_cmd |= RxVlan; else tp->cp_cmd &= ~RxVlan; @@ -3197,6 +3200,14 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } rtl8169_init_phy(dev, tp); + + /* + * Pretend we are using VLANs; This bypasses a nasty bug where + * Interrupts stop flowing on high load on 8110SCd controllers. + */ + if (tp->mac_version == RTL_GIGA_MAC_VER_05) + RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan); + device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL); out: -- GitLab From 62e20a624b18e135870ae781087bc63fdda829ba Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 24 Oct 2009 06:53:07 -0700 Subject: [PATCH 0174/1165] DM9000: Fix revision ID for DM9000B The DM9000B revision ID is 0x1A, not 0x1B as set in the curernt dm9000.h header. Fix bug reported by Paolo Zebelloni. Signed-off-by: Ben Dooks Signed-off-by: Simtec Linux Team Signed-off-by: David S. Miller --- drivers/net/dm9000.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h index 80817c2edfb..fb1c924d79b 100644 --- a/drivers/net/dm9000.h +++ b/drivers/net/dm9000.h @@ -50,7 +50,7 @@ #define DM9000_RCSR 0x32 #define CHIPR_DM9000A 0x19 -#define CHIPR_DM9000B 0x1B +#define CHIPR_DM9000B 0x1A #define DM9000_MRCMDX 0xF0 #define DM9000_MRCMD 0xF2 -- GitLab From 66ed1e5ec1d979e572554643063734a7664261bb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 24 Oct 2009 06:55:20 -0700 Subject: [PATCH 0175/1165] pktgen: Dont leak kernel memory While playing with pktgen, I realized IP ID was not filled and a random value was taken, possibly leaking 2 bytes of kernel memory. We can use an increasing ID, this can help diagnostics anyway. Also clear packet payload, instead of leaking kernel memory. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/pktgen.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 86acdba0a97..6eb8d47cbf3 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -335,6 +335,7 @@ struct pktgen_dev { __u32 cur_src_mac_offset; __be32 cur_saddr; __be32 cur_daddr; + __u16 ip_id; __u16 cur_udp_dst; __u16 cur_udp_src; __u16 cur_queue_map; @@ -2630,6 +2631,8 @@ static struct sk_buff *fill_packet_ipv4(struct net_device *odev, iph->protocol = IPPROTO_UDP; /* UDP */ iph->saddr = pkt_dev->cur_saddr; iph->daddr = pkt_dev->cur_daddr; + iph->id = htons(pkt_dev->ip_id); + pkt_dev->ip_id++; iph->frag_off = 0; iplen = 20 + 8 + datalen; iph->tot_len = htons(iplen); @@ -2641,24 +2644,26 @@ static struct sk_buff *fill_packet_ipv4(struct net_device *odev, skb->dev = odev; skb->pkt_type = PACKET_HOST; - if (pkt_dev->nfrags <= 0) + if (pkt_dev->nfrags <= 0) { pgh = (struct pktgen_hdr *)skb_put(skb, datalen); - else { + memset(pgh + 1, 0, datalen - sizeof(struct pktgen_hdr)); + } else { int frags = pkt_dev->nfrags; - int i; + int i, len; pgh = (struct pktgen_hdr *)(((char *)(udph)) + 8); if (frags > MAX_SKB_FRAGS) frags = MAX_SKB_FRAGS; if (datalen > frags * PAGE_SIZE) { - skb_put(skb, datalen - frags * PAGE_SIZE); + len = datalen - frags * PAGE_SIZE; + memset(skb_put(skb, len), 0, len); datalen = frags * PAGE_SIZE; } i = 0; while (datalen > 0) { - struct page *page = alloc_pages(GFP_KERNEL, 0); + struct page *page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0); skb_shinfo(skb)->frags[i].page = page; skb_shinfo(skb)->frags[i].page_offset = 0; skb_shinfo(skb)->frags[i].size = -- GitLab From d3da68310a2cf934c2ea8a99a519d8b1ccca4c56 Mon Sep 17 00:00:00 2001 From: Jasper Spaans Date: Fri, 23 Oct 2009 04:08:46 +0000 Subject: [PATCH 0176/1165] bonding: Modify hash transmit policies to use the packet's source MAC address Modify bonding hash transmit policies to use the psource MAC address of the packet instead of the MAC address configured for the bonding device. The old sitation conflicts with the documentation. Signed-off-by: Jasper Spaans Acked-by: Eric Dumazet Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 69c5b15e22d..3f05267b2cf 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3665,10 +3665,10 @@ static int bond_xmit_hash_policy_l23(struct sk_buff *skb, if (skb->protocol == htons(ETH_P_IP)) { return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^ - (data->h_dest[5] ^ bond_dev->dev_addr[5])) % count; + (data->h_dest[5] ^ data->h_source[5])) % count; } - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /* @@ -3695,7 +3695,7 @@ static int bond_xmit_hash_policy_l34(struct sk_buff *skb, } - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /* @@ -3706,7 +3706,7 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, { struct ethhdr *data = (struct ethhdr *)skb->data; - return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count; + return (data->h_dest[5] ^ data->h_source[5]) % count; } /*-------------------------- Device entry points ----------------------------*/ -- GitLab From 94efb72328afa29ea5fd93e48ed17489afcdaa12 Mon Sep 17 00:00:00 2001 From: Komuro Date: Sat, 24 Oct 2009 08:07:39 +0900 Subject: [PATCH 0177/1165] pcmcia: do not load the pd6729 driver if io_base is NULL The CL-PD6729 chip in some docking station is not initialized properly under Linux. In that case, do not load the pd6729 driver. [Dominik Brodowski : spelling fixes, check for NULL not 0] Signed-off-by: Komuro Signed-off-by: Dominik Brodowski --- drivers/pcmcia/pd6729.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index 1c39d3438f2..70a33468bcd 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -641,6 +641,12 @@ static int __devinit pd6729_pci_probe(struct pci_dev *dev, if ((ret = pci_enable_device(dev))) goto err_out_free_mem; + if (!pci_resource_start(dev, 0)) { + printk(KERN_INFO "pd6729: refusing to load the driver " + "as the io_base is 0.\n"); + goto err_out_free_mem; + } + printk(KERN_INFO "pd6729: Cirrus PD6729 PCI to PCMCIA Bridge " "at 0x%llx on irq %d\n", (unsigned long long)pci_resource_start(dev, 0), dev->irq); -- GitLab From ab72b00734ae4d0b5ff273a0f6c7abeaa3713c76 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 25 Oct 2009 15:39:37 +0000 Subject: [PATCH 0178/1165] ARM: Fix signal restart issues with NX and OABI compat The signal restarting code was placed on the user stack when OABI compatibility is enabled. Unfortunately, with an EABI NX executable, this results in an attempt to run code from the non-executable stack, which segfaults the application. Fix this by placing the code in the vectors page, along side the signal return code, and directing the application to that code. Reported-by: saeed bishara Tested-by: saeed bishara Signed-off-by: Russell King --- arch/arm/kernel/signal.c | 41 +++++++++++++++++----------------------- arch/arm/kernel/signal.h | 4 +++- arch/arm/kernel/traps.c | 4 +++- 3 files changed, 23 insertions(+), 26 deletions(-) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 1423a341978..2a573d4fea2 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/kernel/signal.c * - * Copyright (C) 1995-2002 Russell King + * Copyright (C) 1995-2009 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -29,6 +29,7 @@ */ #define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) #define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) +#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE) /* * With EABI, the syscall number has to be loaded into r7. @@ -48,6 +49,18 @@ const unsigned long sigreturn_codes[7] = { MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN, }; +/* + * Either we support OABI only, or we have EABI with the OABI + * compat layer enabled. In the later case we don't know if + * user space is EABI or not, and if not we must not clobber r7. + * Always using the OABI syscall solves that issue and works for + * all those cases. + */ +const unsigned long syscall_restart_code[2] = { + SWI_SYS_RESTART, /* swi __NR_restart_syscall */ + 0xe49df004, /* ldr pc, [sp], #4 */ +}; + /* * atomically swap in the new signal mask, and wait for a signal. */ @@ -645,32 +658,12 @@ static void do_signal(struct pt_regs *regs, int syscall) regs->ARM_pc -= 4; #else u32 __user *usp; - u32 swival = __NR_restart_syscall; - regs->ARM_sp -= 12; + regs->ARM_sp -= 4; usp = (u32 __user *)regs->ARM_sp; - /* - * Either we supports OABI only, or we have - * EABI with the OABI compat layer enabled. - * In the later case we don't know if user - * space is EABI or not, and if not we must - * not clobber r7. Always using the OABI - * syscall solves that issue and works for - * all those cases. - */ - swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE; - - put_user(regs->ARM_pc, &usp[0]); - /* swi __NR_restart_syscall */ - put_user(0xef000000 | swival, &usp[1]); - /* ldr pc, [sp], #12 */ - put_user(0xe49df00c, &usp[2]); - - flush_icache_range((unsigned long)usp, - (unsigned long)(usp + 3)); - - regs->ARM_pc = regs->ARM_sp + 4; + put_user(regs->ARM_pc, usp); + regs->ARM_pc = KERN_RESTART_CODE; #endif } } diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 27beece1550..6fcfe8398aa 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -1,12 +1,14 @@ /* * linux/arch/arm/kernel/signal.h * - * Copyright (C) 2005 Russell King. + * Copyright (C) 2005-2009 Russell King. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) +#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) extern const unsigned long sigreturn_codes[7]; +extern const unsigned long syscall_restart_code[2]; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f838f36eb70..95718a6b50a 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/kernel/traps.c * - * Copyright (C) 1995-2002 Russell King + * Copyright (C) 1995-2009 Russell King * Fragments that appear the same as linux/arch/i386/kernel/traps.c (C) Linus Torvalds * * This program is free software; you can redistribute it and/or modify @@ -751,6 +751,8 @@ void __init early_trap_init(void) */ memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes, sizeof(sigreturn_codes)); + memcpy((void *)KERN_RESTART_CODE, syscall_restart_code, + sizeof(syscall_restart_code)); flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); -- GitLab From 84087126d50400789b44459cfc45721778e6ebb0 Mon Sep 17 00:00:00 2001 From: Marti Raudsepp Date: Sat, 24 Oct 2009 19:10:36 +0300 Subject: [PATCH 0179/1165] perf tools: Fix compatibility with libelf 0.8 and autodetect The Makefile now automatically defines LIBELF_NO_MMAP when libelf 0.8.x is detected. libelf 0.8 is still maintained and some distributions such as Arch Linux use it instead of elfutils. Signed-off-by: Marti Raudsepp Cc: Lucas De Marchi Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Frederic Weisbecker Cc: Arnaldo Carvalho de Melo Cc: Arjan van de Ven Cc: Mike Galbraith LKML-Reference: <1256400636.3007.16.camel@newn> Signed-off-by: Ingo Molnar --- tools/perf/Makefile | 6 +++++- tools/perf/util/symbol.c | 6 +++--- tools/perf/util/symbol.h | 10 ++++++++++ 3 files changed, 18 insertions(+), 4 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 742a32eee8f..46e877b42d2 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -422,7 +422,11 @@ ifeq ($(uname_S),Darwin) PTHREAD_LIBS = endif -ifneq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y) +ifeq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y) + ifneq ($(shell sh -c "(echo '\#include '; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y) + BASIC_CFLAGS += -DLIBELF_NO_MMAP + endif +else msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]); endif diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 47ea0609a76..226f44a2357 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -413,7 +413,7 @@ static int dso__synthesize_plt_symbols(struct dso *self, int v) if (fd < 0) goto out; - elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); + elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL); if (elf == NULL) goto out_close; @@ -533,7 +533,7 @@ static int dso__load_sym(struct dso *self, int fd, const char *name, Elf *elf; int nr = 0, kernel = !strcmp("[kernel]", self->name); - elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); + elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL); if (elf == NULL) { if (v) fprintf(stderr, "%s: cannot read %s ELF file.\n", @@ -675,7 +675,7 @@ static char *dso__read_build_id(struct dso *self, int v) if (fd < 0) goto out; - elf = elf_begin(fd, ELF_C_READ_MMAP, NULL); + elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL); if (elf == NULL) { if (v) fprintf(stderr, "%s: cannot read %s ELF file.\n", diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h index 6e849071640..829da9edba6 100644 --- a/tools/perf/util/symbol.h +++ b/tools/perf/util/symbol.h @@ -27,6 +27,16 @@ static inline char *bfd_demangle(void __used *v, const char __used *c, #endif #endif +/* + * libelf 0.8.x and earlier do not support ELF_C_READ_MMAP; + * for newer versions we can use mmap to reduce memory usage: + */ +#ifdef LIBELF_NO_MMAP +# define PERF_ELF_C_READ_MMAP ELF_C_READ +#else +# define PERF_ELF_C_READ_MMAP ELF_C_READ_MMAP +#endif + #ifndef DMGL_PARAMS #define DMGL_PARAMS (1 << 0) /* Include function args */ #define DMGL_ANSI (1 << 1) /* Include const, volatile, etc */ -- GitLab From b214f11fb92713fbb07d8c1f62dd1aa8077b56c9 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Sat, 24 Oct 2009 00:06:48 +0200 Subject: [PATCH 0180/1165] ASoC: Amstrad Delta: add info about the line discipline requirement to Kconfig help text I thought it could be usefull to add some information on how to get the device fully supported by loading a line discipline on the modem line. Signed-off-by: Janusz Krzysztofik Signed-off-by: Mark Brown --- sound/soc/omap/Kconfig | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index 2dee9839be8..653a362425d 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -21,7 +21,18 @@ config SND_OMAP_SOC_AMS_DELTA select SND_OMAP_SOC_MCBSP select SND_SOC_CX20442 help - Say Y if you want to add support for SoC audio on Amstrad Delta. + Say Y if you want to add support for SoC audio device connected to + a handset and a speakerphone found on Amstrad E3 (Delta) videophone. + + Note that in order to get those devices fully supported, you have to + build the kernel with standard serial port driver included and + configured for at least 4 ports. Then, from userspace, you must load + a line discipline #19 on the modem (ttyS3) serial line. The simplest + way to achieve this is to install util-linux-ng and use the included + ldattach utility. This can be started automatically from udev, + a simple rule like this one should do the trick (it does for me): + ACTION=="add", KERNEL=="controlC0", \ + RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" config SND_OMAP_SOC_OSK5912 tristate "SoC Audio support for omap osk5912" -- GitLab From ce63e6bd0ac7eca242562ee07f518bacc8eaa5ce Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 25 Oct 2009 22:42:38 +0000 Subject: [PATCH 0181/1165] ARM: integrator: allow Integrator to be built with highmem This fixes Integrator builds with highmem enabled; we need to translate from 'struct page' to a DMA address, and this is not possible without __pfn_to_bus(). Signed-off-by: Russell King --- arch/arm/mach-integrator/include/mach/memory.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h index 2b2e7a11072..4891828454f 100644 --- a/arch/arm/mach-integrator/include/mach/memory.h +++ b/arch/arm/mach-integrator/include/mach/memory.h @@ -28,5 +28,6 @@ #define BUS_OFFSET UL(0x80000000) #define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET) #define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET) +#define __pfn_to_bus(x) (((x) << PAGE_SHIFT) + BUS_OFFSET) #endif -- GitLab From c06e004c72aa0d1acbc239fb995aa3d823543a8a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 25 Oct 2009 22:36:10 +0000 Subject: [PATCH 0182/1165] ARM: Use GFP_DMA only for masks _less_ than 32-bit We were using GFP_DMA for masks other than 0xffffffff, which is wrong when some masks are initialized to 0xffffffffffffffff. This caused such masks to obtain memory from the precious DMA pool. Signed-off-by: Russell King --- arch/arm/mm/dma-mapping.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index b30925fcbcd..b9590a7085c 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -205,7 +205,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, order = get_order(size); - if (mask != 0xffffffff) + if (mask < 0xffffffffULL) gfp |= GFP_DMA; page = alloc_pages(gfp, order); @@ -289,7 +289,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (!mask) goto error; - if (mask != 0xffffffff) + if (mask < 0xffffffffULL) gfp |= GFP_DMA; virt = kmalloc(size, gfp); if (!virt) -- GitLab From ba93483f8c997f1a3fc0a6677f41e8556ae3eba6 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 26 Oct 2009 09:58:31 +0900 Subject: [PATCH 0183/1165] sh: __irq_entry annotate do_IRQ(). This adds an __irq_entry annotation for do_IRQ() so that the IRQ annotation in the function graph tracer works as advertized. We already have the IRQENTRY section wired up, so this is just a trivial addition to actually make use of it. Signed-off-by: Paul Mundt --- arch/sh/kernel/irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index 7cb933ba495..eac7da772fc 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -106,7 +107,7 @@ static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly; static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly; #endif -asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs) +asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); #ifdef CONFIG_IRQSTACKS -- GitLab From 26fadd3672964596d33548490b9756014ae0f414 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Thu, 22 Oct 2009 11:58:37 +0000 Subject: [PATCH 0184/1165] sh: Build fix: define more __movmem* symbols ERROR: "__movmemSI12" [net/unix/unix.ko] undefined! ERROR: "__movmemSI52" [net/ipv6/sit.ko] undefined! ERROR: "__movmemSI24" [net/ipv6/ipv6.ko] undefined! ERROR: "__movmemSI60" [net/ipv6/ipv6.ko] undefined! ERROR: "__movmemSI16" [net/ipv6/ipv6.ko] undefined! ERROR: "__movmemSI20" [net/ipv6/ipv6.ko] undefined! ERROR: "__movmemSI32" [net/ipv6/ipv6.ko] undefined! Signed-off-by: Lubomir Rintel Signed-off-by: Paul Mundt --- arch/sh/kernel/sh_ksyms_32.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index 86c27042835..444cce3ae92 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -85,6 +85,20 @@ DECLARE_EXPORT(__movstr_i4_even); DECLARE_EXPORT(__movstr_i4_odd); DECLARE_EXPORT(__movstrSI12_i4); DECLARE_EXPORT(__movmem); +DECLARE_EXPORT(__movmemSI8); +DECLARE_EXPORT(__movmemSI12); +DECLARE_EXPORT(__movmemSI16); +DECLARE_EXPORT(__movmemSI20); +DECLARE_EXPORT(__movmemSI24); +DECLARE_EXPORT(__movmemSI28); +DECLARE_EXPORT(__movmemSI32); +DECLARE_EXPORT(__movmemSI36); +DECLARE_EXPORT(__movmemSI40); +DECLARE_EXPORT(__movmemSI44); +DECLARE_EXPORT(__movmemSI48); +DECLARE_EXPORT(__movmemSI52); +DECLARE_EXPORT(__movmemSI56); +DECLARE_EXPORT(__movmemSI60); DECLARE_EXPORT(__movmem_i4_even); DECLARE_EXPORT(__movmem_i4_odd); DECLARE_EXPORT(__movmemSI12_i4); -- GitLab From 60339fad5c68c9c533cd14e67194ff8f727c41d9 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sat, 24 Oct 2009 18:56:57 +0000 Subject: [PATCH 0185/1165] sh: Check for return_to_handler when unwinding the stack When CONFIG_FUNCTION_GRAPH_TRACER is enabled the function graph tracer may patch return addresses on the stack with the address of return_to_handler(). This really confuses the DWARF unwinder because it will try find the caller of return_to_handler(), not the caller of the real return address. So teach the DWARF unwinder how to find the real return address whenever it encounters return_to_handler(). This patch does not cope very well when multiple return addresses on the stack have been patched. To make it work properly it would require state to track how many return_to_handler()'s have been seen so that we'd know where to look in current->curr_ret_stack[]. So for now, instead of trying to handle this, just moan if more than one return address on the stack has been patched. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/kernel/dwarf.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 03b3616c80a..2d07084e488 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -557,6 +558,27 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, if (!pc && !prev) pc = (unsigned long)current_text_addr(); +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + /* + * If our stack has been patched by the function graph tracer + * then we might see the address of return_to_handler() where we + * expected to find the real return address. + */ + if (pc == (unsigned long)&return_to_handler) { + int index = current->curr_ret_stack; + + /* + * We currently have no way of tracking how many + * return_to_handler()'s we've seen. If there is more + * than one patched return address on our stack, + * complain loudly. + */ + WARN_ON(index > 0); + + pc = current->ret_stack[index].ret; + } +#endif + frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC); if (!frame) { printk(KERN_ERR "Unable to allocate a dwarf frame\n"); -- GitLab From c850cb782626fda78e5e9e5baf18a5bd806a225c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 23 Oct 2009 18:49:03 +1000 Subject: [PATCH 0186/1165] drm/kms: fix kms/fbdev colormap support properly. This sets the fbcon to use TRUECOLOR by default, it then only modifies the pseudo palette for fbcon, and only touches the real palette when in 8-bit pseudo color mode. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 42 +++++++++++++++++++++++---------- 1 file changed, 29 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 23dc9c115fd..9c924614c41 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -454,22 +454,39 @@ out_free: } EXPORT_SYMBOL(drm_fb_helper_init_crtc_count); -static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, +static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, u16 regno, struct fb_info *info) { struct drm_fb_helper *fb_helper = info->par; struct drm_framebuffer *fb = fb_helper->fb; int pindex; + if (info->fix.visual == FB_VISUAL_TRUECOLOR) { + u32 *palette; + u32 value; + /* place color in psuedopalette */ + if (regno > 16) + return -EINVAL; + palette = (u32 *)info->pseudo_palette; + red >>= (16 - info->var.red.length); + green >>= (16 - info->var.green.length); + blue >>= (16 - info->var.blue.length); + value = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + palette[regno] = value; + return 0; + } + pindex = regno; if (fb->bits_per_pixel == 16) { pindex = regno << 3; if (fb->depth == 16 && regno > 63) - return; + return -EINVAL; if (fb->depth == 15 && regno > 31) - return; + return -EINVAL; if (fb->depth == 16) { u16 r, g, b; @@ -493,13 +510,7 @@ static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, if (fb->depth != 16) fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex); - - if (regno < 16 && info->fix.visual == FB_VISUAL_DIRECTCOLOR) { - ((u32 *) fb->pseudo_palette)[regno] = - (regno << info->var.red.offset) | - (regno << info->var.green.offset) | - (regno << info->var.blue.offset); - } + return 0; } int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) @@ -536,7 +547,9 @@ int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) if (transp) htransp = *transp++; - setcolreg(crtc, hred, hgreen, hblue, start++, info); + rc = setcolreg(crtc, hred, hgreen, hblue, start++, info); + if (rc) + return rc; } crtc_funcs->load_lut(crtc); } @@ -555,6 +568,7 @@ int drm_fb_helper_setcolreg(unsigned regno, struct drm_device *dev = fb_helper->dev; struct drm_crtc *crtc; int i; + int ret; if (regno > 255) return 1; @@ -568,8 +582,10 @@ int drm_fb_helper_setcolreg(unsigned regno, if (i == fb_helper->crtc_count) continue; + ret = setcolreg(crtc, red, green, blue, regno, info); + if (ret) + return ret; - setcolreg(crtc, red, green, blue, regno, info); crtc_funcs->load_lut(crtc); } return 0; @@ -928,7 +944,7 @@ void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch, { info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR : - FB_VISUAL_DIRECTCOLOR; + FB_VISUAL_TRUECOLOR; info->fix.type_aux = 0; info->fix.xpanstep = 1; /* doing it in hw */ info->fix.ypanstep = 1; /* doing it in hw */ -- GitLab From ceb776bc87280eb8d13f38e4d7afae757e95af44 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Mon, 19 Oct 2009 12:50:41 -0400 Subject: [PATCH 0187/1165] drm/radeon/kms: fix cs parser tex bit 11 check The problem boils down to the order when the bit11 of the texture size is or'ed to the original width. In the end each mipmap level has the same width or height because of that 11 bit is ored to the scaled down lod with and thus blows up the size again to the full size or more due to the power of two rounding afterwards. The attached patch changes this order so that the texture sizes are computed correct. Also the on error the yet missing inputs to the size computation are printed which helped me to find out where it really breaks. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index c22adff179a..ed5e983d21e 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2548,8 +2548,11 @@ void r100_bandwidth_update(struct radeon_device *rdev) static inline void r100_cs_track_texture_print(struct r100_cs_track_texture *t) { DRM_ERROR("pitch %d\n", t->pitch); + DRM_ERROR("use_pitch %d\n", t->use_pitch); DRM_ERROR("width %d\n", t->width); + DRM_ERROR("width_11 %d\n", t->width_11); DRM_ERROR("height %d\n", t->height); + DRM_ERROR("height_11 %d\n", t->height_11); DRM_ERROR("num levels %d\n", t->num_levels); DRM_ERROR("depth %d\n", t->txdepth); DRM_ERROR("bpp %d\n", t->cpp); @@ -2609,15 +2612,17 @@ static int r100_cs_track_texture_check(struct radeon_device *rdev, else w = track->textures[u].pitch / (1 << i); } else { - w = track->textures[u].width / (1 << i); + w = track->textures[u].width; if (rdev->family >= CHIP_RV515) w |= track->textures[u].width_11; + w = w / (1 << i); if (track->textures[u].roundup_w) w = roundup_pow_of_two(w); } - h = track->textures[u].height / (1 << i); + h = track->textures[u].height; if (rdev->family >= CHIP_RV515) h |= track->textures[u].height_11; + h = h / (1 << i); if (track->textures[u].roundup_h) h = roundup_pow_of_two(h); size += w * h; -- GitLab From 5885b7a9f4d2a0405b7e42d44eab4ed2302a8239 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 19 Oct 2009 17:23:33 -0400 Subject: [PATCH 0188/1165] drm/radeon/kms: fix vram_width calculation on r6xx/r7xx Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 29 +++++++++++++++++------------ drivers/gpu/drm/radeon/r600d.h | 4 ++++ drivers/gpu/drm/radeon/rv770.c | 30 ++++++++++++++++++++++++++---- drivers/gpu/drm/radeon/rv770d.h | 5 +++++ 4 files changed, 52 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 1b5aa1fd368..e87475c87d5 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -339,11 +339,10 @@ int r600_mc_init(struct radeon_device *rdev) { fixed20_12 a; u32 tmp; - int chansize; + int chansize, numchan; int r; /* Get VRAM informations */ - rdev->mc.vram_width = 128; rdev->mc.vram_is_ddr = true; tmp = RREG32(RAMCFG); if (tmp & CHANSIZE_OVERRIDE) { @@ -353,17 +352,23 @@ int r600_mc_init(struct radeon_device *rdev) } else { chansize = 32; } - if (rdev->family == CHIP_R600) { - rdev->mc.vram_width = 8 * chansize; - } else if (rdev->family == CHIP_RV670) { - rdev->mc.vram_width = 4 * chansize; - } else if ((rdev->family == CHIP_RV610) || - (rdev->family == CHIP_RV620)) { - rdev->mc.vram_width = chansize; - } else if ((rdev->family == CHIP_RV630) || - (rdev->family == CHIP_RV635)) { - rdev->mc.vram_width = 2 * chansize; + tmp = RREG32(CHMAP); + switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) { + case 0: + default: + numchan = 1; + break; + case 1: + numchan = 2; + break; + case 2: + numchan = 4; + break; + case 3: + numchan = 8; + break; } + rdev->mc.vram_width = numchan * chansize; /* Could aper size report 0 ? */ rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 5084595eb91..cf238bf5700 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -270,6 +270,10 @@ #define PCIE_PORT_INDEX 0x0038 #define PCIE_PORT_DATA 0x003C +#define CHMAP 0x2004 +#define NOOFCHAN_SHIFT 12 +#define NOOFCHAN_MASK 0x00003000 + #define RAMCFG 0x2408 #define NOOFBANK_SHIFT 0 #define NOOFBANK_MASK 0x00000001 diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 595ac638039..40553913b92 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -774,14 +774,36 @@ int rv770_mc_init(struct radeon_device *rdev) { fixed20_12 a; u32 tmp; + int chansize, numchan; int r; /* Get VRAM informations */ - /* FIXME: Don't know how to determine vram width, need to check - * vram_width usage - */ - rdev->mc.vram_width = 128; rdev->mc.vram_is_ddr = true; + tmp = RREG32(MC_ARB_RAMCFG); + if (tmp & CHANSIZE_OVERRIDE) { + chansize = 16; + } else if (tmp & CHANSIZE_MASK) { + chansize = 64; + } else { + chansize = 32; + } + tmp = RREG32(MC_SHARED_CHMAP); + switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) { + case 0: + default: + numchan = 1; + break; + case 1: + numchan = 2; + break; + case 2: + numchan = 4; + break; + case 3: + numchan = 8; + break; + } + rdev->mc.vram_width = numchan * chansize; /* Could aper size report 0 ? */ rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h index 4b9c3d6396f..a1367ab6f26 100644 --- a/drivers/gpu/drm/radeon/rv770d.h +++ b/drivers/gpu/drm/radeon/rv770d.h @@ -129,6 +129,10 @@ #define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0 #define HDP_TILING_CONFIG 0x2F3C +#define MC_SHARED_CHMAP 0x2004 +#define NOOFCHAN_SHIFT 12 +#define NOOFCHAN_MASK 0x00003000 + #define MC_ARB_RAMCFG 0x2760 #define NOOFBANK_SHIFT 0 #define NOOFBANK_MASK 0x00000003 @@ -142,6 +146,7 @@ #define CHANSIZE_MASK 0x00000100 #define BURSTLENGTH_SHIFT 9 #define BURSTLENGTH_MASK 0x00000200 +#define CHANSIZE_OVERRIDE (1 << 11) #define MC_VM_AGP_TOP 0x2028 #define MC_VM_AGP_BOT 0x202C #define MC_VM_AGP_BASE 0x2030 -- GitLab From 790cfb34ad645be3bf69265cb05d824aeabcfa11 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:26:09 -0400 Subject: [PATCH 0189/1165] drm/radeon/kms: add quirk for acer 5102 doesn't have a tv-out port Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 33 +++++++++++++++++-------- 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 8298c990be7..fcb9371bf05 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1579,6 +1579,17 @@ static bool radeon_apply_legacy_quirks(struct drm_device *dev, return true; } +static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) +{ + /* Acer 5102 has non-existent TV port */ + if (dev->pdev->device == 0x5975 && + dev->pdev->subsystem_vendor == 0x1025 && + dev->pdev->subsystem_device == 0x009f) + return false; + + return true; +} + bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; @@ -1896,16 +1907,18 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE); if (tv_info) { if (RBIOS8(tv_info + 6) == 'T') { - radeon_add_legacy_encoder(dev, - radeon_get_encoder_id - (dev, - ATOM_DEVICE_TV1_SUPPORT, - 2), - ATOM_DEVICE_TV1_SUPPORT); - radeon_add_legacy_connector(dev, 6, - ATOM_DEVICE_TV1_SUPPORT, - DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + if (radeon_apply_legacy_tv_quirks(dev)) { + radeon_add_legacy_encoder(dev, + radeon_get_encoder_id + (dev, + ATOM_DEVICE_TV1_SUPPORT, + 2), + ATOM_DEVICE_TV1_SUPPORT); + radeon_add_legacy_connector(dev, 6, + ATOM_DEVICE_TV1_SUPPORT, + DRM_MODE_CONNECTOR_SVIDEO, + &ddc_i2c); + } } } } -- GitLab From bc293e58cb4095f2ad43fe672ae269e31d1a18e2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Mon, 19 Oct 2009 17:49:49 -0400 Subject: [PATCH 0190/1165] drm/radeon/kms/atom: get better min pixel clock info Where supported use ulMinPixelClockPLL_Output rather than usMinPixelClockPLL_Output for pll_out_min. This seems to improve pll selection on some boards. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 79d4b771c77..cec67917179 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -641,8 +641,12 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) le16_to_cpu(firmware_info->info.usReferenceClock); p1pll->reference_div = 0; - p1pll->pll_out_min = - le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output); + if (crev < 2) + p1pll->pll_out_min = + le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output); + else + p1pll->pll_out_min = + le32_to_cpu(firmware_info->info_12.ulMinPixelClockPLL_Output); p1pll->pll_out_max = le32_to_cpu(firmware_info->info.ulMaxPixelClockPLL_Output); -- GitLab From c54b1820d69a1043acaf50d084852e628266e0e2 Mon Sep 17 00:00:00 2001 From: Robert Noland Date: Tue, 20 Oct 2009 08:11:36 -0500 Subject: [PATCH 0191/1165] drm/radeon/r600: Replace repeated calculations with variable. - Reduce the chance of error and avoid a bit of overhead. - Use switch to assign color and format Signed-off-by: Robert Noland Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit.c | 52 ++++++++++++++++++------------ 1 file changed, 31 insertions(+), 21 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index d988eece018..626a9ab7075 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -774,6 +774,7 @@ r600_blit_swap(struct drm_device *dev, { drm_radeon_private_t *dev_priv = dev->dev_private; int cb_format, tex_format; + int sx2, sy2, dx2, dy2; u64 vb_addr; u32 *vb; @@ -790,16 +791,10 @@ r600_blit_swap(struct drm_device *dev, vb = r600_nomm_get_vb_ptr(dev); } - if (cpp == 4) { - cb_format = COLOR_8_8_8_8; - tex_format = FMT_8_8_8_8; - } else if (cpp == 2) { - cb_format = COLOR_5_6_5; - tex_format = FMT_5_6_5; - } else { - cb_format = COLOR_8; - tex_format = FMT_8; - } + sx2 = sx + w; + sy2 = sy + h; + dx2 = dx + w; + dy2 = dy + h; vb[0] = i2f(dx); vb[1] = i2f(dy); @@ -807,31 +802,46 @@ r600_blit_swap(struct drm_device *dev, vb[3] = i2f(sy); vb[4] = i2f(dx); - vb[5] = i2f(dy + h); + vb[5] = i2f(dy2); vb[6] = i2f(sx); - vb[7] = i2f(sy + h); + vb[7] = i2f(sy2); - vb[8] = i2f(dx + w); - vb[9] = i2f(dy + h); - vb[10] = i2f(sx + w); - vb[11] = i2f(sy + h); + vb[8] = i2f(dx2); + vb[9] = i2f(dy2); + vb[10] = i2f(sx2); + vb[11] = i2f(sy2); + + switch(cpp) { + case 4: + cb_format = COLOR_8_8_8_8; + tex_format = FMT_8_8_8_8; + break; + case 2: + cb_format = COLOR_5_6_5; + tex_format = FMT_5_6_5; + break; + default: + cb_format = COLOR_8; + tex_format = FMT_8; + break; + } /* src */ set_tex_resource(dev_priv, tex_format, src_pitch / cpp, - sy + h, src_pitch / cpp, + sy2, src_pitch / cpp, src_gpu_addr); cp_set_surface_sync(dev_priv, - R600_TC_ACTION_ENA, (src_pitch * (sy + h)), src_gpu_addr); + R600_TC_ACTION_ENA, src_pitch * sy2, src_gpu_addr); /* dst */ set_render_target(dev_priv, cb_format, - dst_pitch / cpp, dy + h, + dst_pitch / cpp, dy2, dst_gpu_addr); /* scissors */ - set_scissors(dev_priv, dx, dy, dx + w, dy + h); + set_scissors(dev_priv, dx, dy, dx2, dy2); /* Vertex buffer setup */ vb_addr = dev_priv->gart_buffers_offset + @@ -844,7 +854,7 @@ r600_blit_swap(struct drm_device *dev, cp_set_surface_sync(dev_priv, R600_CB_ACTION_ENA | R600_CB0_DEST_BASE_ENA, - dst_pitch * (dy + h), dst_gpu_addr); + dst_pitch * dy2, dst_gpu_addr); dev_priv->blit_vb->used += 12 * 4; } -- GitLab From 33fdb15c99aac20d238af487fa363d3e5c7ed197 Mon Sep 17 00:00:00 2001 From: Robert Noland Date: Tue, 20 Oct 2009 13:07:38 -0500 Subject: [PATCH 0192/1165] drm/radeon/r600: only assign vb after we know space is available. This patch only changes this is the swap path, where it doesn't loop. Signed-off-by: Robert Noland Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index 626a9ab7075..5ea43234758 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -778,8 +778,6 @@ r600_blit_swap(struct drm_device *dev, u64 vb_addr; u32 *vb; - vb = r600_nomm_get_vb_ptr(dev); - if ((dev_priv->blit_vb->used + 48) > dev_priv->blit_vb->total) { r600_nomm_put_vb(dev); @@ -788,8 +786,8 @@ r600_blit_swap(struct drm_device *dev, return; set_shaders(dev); - vb = r600_nomm_get_vb_ptr(dev); } + vb = r600_nomm_get_vb_ptr(dev); sx2 = sx + w; sy2 = sy + h; -- GitLab From c290dadf4cac25cc91529d84004795ab43fc0821 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 22 Oct 2009 16:12:34 -0400 Subject: [PATCH 0193/1165] drm/radeon/kms/r7xx: add regs for 40 bit CUR/GRPH addresses The *_HIGH regs are reversed. The secondary ones are in the primary block and vice versa. We currently only use a 32 bit internal address, so these are 0 for now. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 10 ++++++++++ drivers/gpu/drm/radeon/r500_reg.h | 9 +++++++++ drivers/gpu/drm/radeon/radeon_cursor.c | 10 ++++++++-- 3 files changed, 27 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index f7dcb691683..9c26e538a1e 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -577,6 +577,16 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, WREG32(AVIVO_D1VGA_CONTROL, 0); else WREG32(AVIVO_D2VGA_CONTROL, 0); + + if (rdev->family >= CHIP_RV770) { + if (radeon_crtc->crtc_id) { + WREG32(R700_D2GRPH_PRIMARY_SURFACE_ADDRESS_HIGH, 0); + WREG32(R700_D2GRPH_SECONDARY_SURFACE_ADDRESS_HIGH, 0); + } else { + WREG32(R700_D1GRPH_PRIMARY_SURFACE_ADDRESS_HIGH, 0); + WREG32(R700_D1GRPH_SECONDARY_SURFACE_ADDRESS_HIGH, 0); + } + } WREG32(AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset, (u32) fb_location); WREG32(AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS + diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h index 868add6e166..7baa7395556 100644 --- a/drivers/gpu/drm/radeon/r500_reg.h +++ b/drivers/gpu/drm/radeon/r500_reg.h @@ -384,9 +384,16 @@ # define AVIVO_D1GRPH_TILED (1 << 20) # define AVIVO_D1GRPH_MACRO_ADDRESS_MODE (1 << 21) +/* The R7xx *_HIGH surface regs are backwards; the D1 regs are in the D2 + * block and vice versa. This applies to GRPH, CUR, etc. + */ #define AVIVO_D1GRPH_LUT_SEL 0x6108 #define AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS 0x6110 +#define R700_D1GRPH_PRIMARY_SURFACE_ADDRESS_HIGH 0x6914 +#define R700_D2GRPH_PRIMARY_SURFACE_ADDRESS_HIGH 0x6114 #define AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS 0x6118 +#define R700_D1GRPH_SECONDARY_SURFACE_ADDRESS_HIGH 0x691c +#define R700_D2GRPH_SECONDARY_SURFACE_ADDRESS_HIGH 0x611c #define AVIVO_D1GRPH_PITCH 0x6120 #define AVIVO_D1GRPH_SURFACE_OFFSET_X 0x6124 #define AVIVO_D1GRPH_SURFACE_OFFSET_Y 0x6128 @@ -404,6 +411,8 @@ # define AVIVO_D1CURSOR_MODE_MASK (3 << 8) # define AVIVO_D1CURSOR_MODE_24BPP 2 #define AVIVO_D1CUR_SURFACE_ADDRESS 0x6408 +#define R700_D1CUR_SURFACE_ADDRESS_HIGH 0x6c0c +#define R700_D2CUR_SURFACE_ADDRESS_HIGH 0x640c #define AVIVO_D1CUR_SIZE 0x6410 #define AVIVO_D1CUR_POSITION 0x6414 #define AVIVO_D1CUR_HOT_SPOT 0x6418 diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index b13c79e38bc..28772a37009 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -109,9 +109,15 @@ static void radeon_set_cursor(struct drm_crtc *crtc, struct drm_gem_object *obj, struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct radeon_device *rdev = crtc->dev->dev_private; - if (ASIC_IS_AVIVO(rdev)) + if (ASIC_IS_AVIVO(rdev)) { + if (rdev->family >= CHIP_RV770) { + if (radeon_crtc->crtc_id) + WREG32(R700_D2CUR_SURFACE_ADDRESS_HIGH, 0); + else + WREG32(R700_D1CUR_SURFACE_ADDRESS_HIGH, 0); + } WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr); - else { + } else { radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr; /* offset is from DISP(2)_BASE_ADDRESS */ WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset); -- GitLab From ebbe1cb936dfc96d809ccf4d64a9755f8ba0c0ff Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 16 Oct 2009 11:15:25 -0400 Subject: [PATCH 0194/1165] drm/radeon/kms/atom: add support for spread spectrum (v2) Spread spectrum is a periodic disturbance added to the feedback divider to change the pixel clock periodically to reduce interference. Only enabled on LVDS. v2: add support for r4xx and fix DCE 3 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios.h | 2 +- drivers/gpu/drm/radeon/atombios_crtc.c | 68 ++++++++++++++++++++---- drivers/gpu/drm/radeon/radeon_atombios.c | 42 +++++++++++++++ drivers/gpu/drm/radeon/radeon_mode.h | 11 ++++ 4 files changed, 111 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 5d402086bc4..c11ddddfb3b 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -2314,7 +2314,7 @@ typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT { UCHAR ucSS_Step; UCHAR ucSS_Delay; UCHAR ucSS_Id; - UCHAR ucRecommandedRef_Div; + UCHAR ucRecommendedRef_Div; UCHAR ucSS_Range; /* it was reserved for V11 */ } ATOM_SPREAD_SPECTRUM_ASSIGNMENT; diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 9c26e538a1e..e5a3c301b7a 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -351,6 +351,61 @@ static void atombios_crtc_set_timing(struct drm_crtc *crtc, atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +static void atombios_set_ss(struct drm_crtc *crtc, int enable) +{ + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + struct drm_encoder *encoder = NULL; + struct radeon_encoder *radeon_encoder = NULL; + struct radeon_encoder_atom_dig *dig = NULL; + int index = GetIndexIntoMasterTable(COMMAND, EnableSpreadSpectrumOnPPLL); + ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION args; + ENABLE_LVDS_SS_PARAMETERS legacy_args; + uint16_t percentage = 0; + uint8_t type = 0, step = 0, delay = 0, range = 0; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc == crtc) { + radeon_encoder = to_radeon_encoder(encoder); + dig = radeon_encoder->enc_priv; + /* only enable spread spectrum on LVDS */ + if (dig && dig->ss) { + percentage = dig->ss->percentage; + type = dig->ss->type; + step = dig->ss->step; + delay = dig->ss->delay; + range = dig->ss->range; + } else if (enable) + return; + break; + } + } + + if (!radeon_encoder) + return; + + if (ASIC_IS_AVIVO(rdev)) { + memset(&args, 0, sizeof(args)); + args.usSpreadSpectrumPercentage = percentage; + args.ucSpreadSpectrumType = type; + args.ucSpreadSpectrumStep = step; + args.ucSpreadSpectrumDelay = delay; + args.ucSpreadSpectrumRange = range; + args.ucPpll = radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1; + args.ucEnable = enable; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + } else { + memset(&legacy_args, 0, sizeof(legacy_args)); + legacy_args.usSpreadSpectrumPercentage = percentage; + legacy_args.ucSpreadSpectrumType = type; + legacy_args.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2; + legacy_args.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4; + legacy_args.ucEnable = enable; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&legacy_args); + } +} + void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); @@ -373,8 +428,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) memset(&args, 0, sizeof(args)); if (ASIC_IS_AVIVO(rdev)) { - uint32_t ss_cntl; - if ((rdev->family == CHIP_RS600) || (rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740)) @@ -385,15 +438,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; else pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV; - - /* disable spread spectrum clocking for now -- thanks Hedy Lamarr */ - if (radeon_crtc->crtc_id == 0) { - ss_cntl = RREG32(AVIVO_P1PLL_INT_SS_CNTL); - WREG32(AVIVO_P1PLL_INT_SS_CNTL, ss_cntl & ~1); - } else { - ss_cntl = RREG32(AVIVO_P2PLL_INT_SS_CNTL); - WREG32(AVIVO_P2PLL_INT_SS_CNTL, ss_cntl & ~1); - } } else { pll_flags |= RADEON_PLL_LEGACY; @@ -641,7 +685,9 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, /* TODO color tiling */ + atombios_set_ss(crtc, 0); atombios_crtc_set_pll(crtc, adjusted_mode); + atombios_set_ss(crtc, 1); atombios_crtc_set_timing(crtc, adjusted_mode); if (ASIC_IS_AVIVO(rdev)) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index cec67917179..18729259c2f 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -771,6 +771,46 @@ bool radeon_atombios_get_tmds_info(struct radeon_encoder *encoder, return false; } +static struct radeon_atom_ss *radeon_atombios_get_ss_info(struct + radeon_encoder + *encoder, + int id) +{ + struct drm_device *dev = encoder->base.dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_mode_info *mode_info = &rdev->mode_info; + int index = GetIndexIntoMasterTable(DATA, PPLL_SS_Info); + uint16_t data_offset; + struct _ATOM_SPREAD_SPECTRUM_INFO *ss_info; + uint8_t frev, crev; + struct radeon_atom_ss *ss = NULL; + + if (id > ATOM_MAX_SS_ENTRY) + return NULL; + + atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, + &crev, &data_offset); + + ss_info = + (struct _ATOM_SPREAD_SPECTRUM_INFO *)(mode_info->atom_context->bios + data_offset); + + if (ss_info) { + ss = + kzalloc(sizeof(struct radeon_atom_ss), GFP_KERNEL); + + if (!ss) + return NULL; + + ss->percentage = le16_to_cpu(ss_info->asSS_Info[id].usSpreadSpectrumPercentage); + ss->type = ss_info->asSS_Info[id].ucSpreadSpectrumType; + ss->step = ss_info->asSS_Info[id].ucSS_Step; + ss->delay = ss_info->asSS_Info[id].ucSS_Delay; + ss->range = ss_info->asSS_Info[id].ucSS_Range; + ss->refdiv = ss_info->asSS_Info[id].ucRecommendedRef_Div; + } + return ss; +} + union lvds_info { struct _ATOM_LVDS_INFO info; struct _ATOM_LVDS_INFO_V12 info_12; @@ -826,6 +866,8 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct /* set crtc values */ drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); + lvds->ss = radeon_atombios_get_ss_info(encoder, lvds_info->info.ucSS_Id); + encoder->native_mode = lvds->native_mode; } return lvds; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index b6868fbe734..2ea5707c018 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -260,6 +260,16 @@ struct radeon_encoder_int_tmds { struct radeon_tmds_pll tmds_pll[4]; }; +/* spread spectrum */ +struct radeon_atom_ss { + uint16_t percentage; + uint8_t type; + uint8_t step; + uint8_t delay; + uint8_t range; + uint8_t refdiv; +}; + struct radeon_encoder_atom_dig { /* atom dig */ bool coherent_mode; @@ -267,6 +277,7 @@ struct radeon_encoder_atom_dig { /* atom lvds */ uint32_t lvds_misc; uint16_t panel_pwr_delay; + struct radeon_atom_ss *ss; /* panel mode */ struct drm_display_mode native_mode; }; -- GitLab From 3e5cb98dfe87cc61d0a1119dd8aa2b1e4cfab424 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 16 Oct 2009 12:21:24 -0400 Subject: [PATCH 0195/1165] drm/radeon/kms: add support for msi Try to enable msi on chips that support it. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 17 ++++++++++++++++- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_irq_kms.c | 9 +++++++++ drivers/gpu/drm/radeon/radeon_reg.h | 6 ++++++ drivers/gpu/drm/radeon/rs600.c | 18 +++++++++++++++++- 5 files changed, 49 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index ed5e983d21e..b438b520ee7 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -186,7 +186,7 @@ static inline uint32_t r100_irq_ack(struct radeon_device *rdev) int r100_irq_process(struct radeon_device *rdev) { - uint32_t status; + uint32_t status, msi_rearm; status = r100_irq_ack(rdev); if (!status) { @@ -209,6 +209,21 @@ int r100_irq_process(struct radeon_device *rdev) } status = r100_irq_ack(rdev); } + if (rdev->msi_enabled) { + switch (rdev->family) { + case CHIP_RS400: + case CHIP_RS480: + msi_rearm = RREG32(RADEON_AIC_CNTL) & ~RS400_MSI_REARM; + WREG32(RADEON_AIC_CNTL, msi_rearm); + WREG32(RADEON_AIC_CNTL, msi_rearm | RS400_MSI_REARM); + break; + default: + msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN; + WREG32(RADEON_MSI_REARM_EN, msi_rearm); + WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN); + break; + } + } return IRQ_HANDLED; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 8b60e36b20b..ea3efd7ae85 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -784,6 +784,7 @@ struct radeon_device { const struct firmware *me_fw; /* all family ME firmware */ const struct firmware *pfp_fw; /* r6/700 PFP firmware */ struct r600_blit r600_blit; + int msi_enabled; /* msi enabled */ }; int radeon_device_init(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 8e0a8759e42..a0fe6232dcb 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -92,6 +92,13 @@ int radeon_irq_kms_init(struct radeon_device *rdev) if (r) { return r; } + /* enable msi */ + rdev->msi_enabled = 0; + if (rdev->family >= CHIP_RV380) { + int ret = pci_enable_msi(rdev->pdev); + if (!ret) + rdev->msi_enabled = 1; + } drm_irq_install(rdev->ddev); rdev->irq.installed = true; DRM_INFO("radeon: irq initialized.\n"); @@ -103,5 +110,7 @@ void radeon_irq_kms_fini(struct radeon_device *rdev) if (rdev->irq.installed) { rdev->irq.installed = false; drm_irq_uninstall(rdev->ddev); + if (rdev->msi_enabled) + pci_disable_msi(rdev->pdev); } } diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index bfa1ab9c93e..29ab75903ec 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -290,6 +290,8 @@ #define RADEON_BUS_CNTL 0x0030 # define RADEON_BUS_MASTER_DIS (1 << 6) # define RADEON_BUS_BIOS_DIS_ROM (1 << 12) +# define RS600_BUS_MASTER_DIS (1 << 14) +# define RS600_MSI_REARM (1 << 20) /* rs600/rs690/rs740 */ # define RADEON_BUS_RD_DISCARD_EN (1 << 24) # define RADEON_BUS_RD_ABORT_EN (1 << 25) # define RADEON_BUS_MSTR_DISCONNECT_EN (1 << 28) @@ -297,6 +299,9 @@ # define RADEON_BUS_READ_BURST (1 << 30) #define RADEON_BUS_CNTL1 0x0034 # define RADEON_BUS_WAIT_ON_LOCK_EN (1 << 4) +/* rv370/rv380, rv410, r423/r430/r480, r5xx */ +#define RADEON_MSI_REARM_EN 0x0160 +# define RV370_MSI_REARM_EN (1 << 0) /* #define RADEON_PCIE_INDEX 0x0030 */ /* #define RADEON_PCIE_DATA 0x0034 */ @@ -3311,6 +3316,7 @@ #define RADEON_AIC_CNTL 0x01d0 # define RADEON_PCIGART_TRANSLATE_EN (1 << 0) # define RADEON_DIS_OUT_OF_PCI_GART_ACCESS (1 << 1) +# define RS400_MSI_REARM (1 << 3) /* rs400/rs480 */ #define RADEON_AIC_LO_ADDR 0x01dc #define RADEON_AIC_PT_BASE 0x01d8 #define RADEON_AIC_HI_ADDR 0x01e0 diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 10dfa78762d..942754c39be 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -242,7 +242,7 @@ void rs600_irq_disable(struct radeon_device *rdev) int rs600_irq_process(struct radeon_device *rdev) { - uint32_t status; + uint32_t status, msi_rearm; uint32_t r500_disp_int; status = rs600_irq_ack(rdev, &r500_disp_int); @@ -260,6 +260,22 @@ int rs600_irq_process(struct radeon_device *rdev) drm_handle_vblank(rdev->ddev, 1); status = rs600_irq_ack(rdev, &r500_disp_int); } + if (rdev->msi_enabled) { + switch (rdev->family) { + case CHIP_RS600: + case CHIP_RS690: + case CHIP_RS740: + msi_rearm = RREG32(RADEON_BUS_CNTL) & ~RS600_MSI_REARM; + WREG32(RADEON_BUS_CNTL, msi_rearm); + WREG32(RADEON_BUS_CNTL, msi_rearm | RS600_MSI_REARM); + break; + default: + msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN; + WREG32(RADEON_MSI_REARM_EN, msi_rearm); + WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN); + break; + } + } return IRQ_HANDLED; } -- GitLab From ec29b8d2af01912bb79adda8aeab4293539f29ac Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 26 Oct 2009 14:40:01 +0900 Subject: [PATCH 0196/1165] perf tools: Remove -Wcast-align The present use of -Wcast-align causes the build to blow up on SH due to generating a "cast increases required alignment of target type" error on each invocation of list_for_each_entry(). It seems that this was previously reported and killed off in the ia64 support patch, but nothing seems to have happened with that. Presumably the same problem still remains there, too. Signed-off-by: Paul Mundt LKML-Reference: <20091026054000.GA13517@linux-sh.org> Signed-off-by: Ingo Molnar --- tools/perf/Makefile | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 46e877b42d2..7e190d522cd 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -177,8 +177,7 @@ endif # Include saner warnings here, which can catch bugs: # -EXTRA_WARNINGS := -Wcast-align -EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat +EXTRA_WARNINGS := -Wformat EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-security EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-y2k EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wshadow -- GitLab From 88345411df1eb5a24272955a53856e001f960a06 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 26 Oct 2009 10:08:55 +0000 Subject: [PATCH 0197/1165] sh: rsk7203 CONFIG_MTD=n fix Fix the rsk7203 board code to build with CONFIG_MTD=n. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-rsk/devices-rsk7203.c | 4 ---- arch/sh/boards/mach-rsk/setup.c | 23 ++++++++++++++--------- 2 files changed, 14 insertions(+), 13 deletions(-) diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c index 4af3a771c05..c37617e6322 100644 --- a/arch/sh/boards/mach-rsk/devices-rsk7203.c +++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c @@ -11,10 +11,6 @@ #include #include #include -#include -#include -#include -#include #include #include #include diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c index af64d030a5c..a5c0df785bf 100644 --- a/arch/sh/boards/mach-rsk/setup.c +++ b/arch/sh/boards/mach-rsk/setup.c @@ -15,14 +15,12 @@ #include #include #include +#ifdef CONFIG_MTD #include +#endif #include #include -static const char *probes[] = { "cmdlinepart", NULL }; - -static struct mtd_partition *parsed_partitions; - static struct mtd_partition rsk_partitions[] = { { .name = "Bootloader", @@ -41,6 +39,8 @@ static struct mtd_partition rsk_partitions[] = { }; static struct physmap_flash_data flash_data = { + .parts = rsk_partitions, + .nr_parts = ARRAY_SIZE(rsk_partitions), .width = 2, }; @@ -60,7 +60,8 @@ static struct platform_device flash_device = { }, }; -static struct mtd_info *flash_mtd; +#ifdef CONFIG_MTD +static const char *probes[] = { "cmdlinepart", NULL }; static struct map_info rsk_flash_map = { .name = "RSK+ Flash", @@ -68,6 +69,10 @@ static struct map_info rsk_flash_map = { .bankwidth = 2, }; +static struct mtd_info *flash_mtd; + +static struct mtd_partition *parsed_partitions; + static void __init set_mtd_partitions(void) { int nr_parts = 0; @@ -77,14 +82,14 @@ static void __init set_mtd_partitions(void) nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_partitions, 0); /* If there is no partition table, used the hard coded table */ - if (nr_parts <= 0) { - flash_data.parts = rsk_partitions; - flash_data.nr_parts = ARRAY_SIZE(rsk_partitions); - } else { + if (nr_parts > 0) { flash_data.nr_parts = nr_parts; flash_data.parts = parsed_partitions; } } +#else +static inline void set_mtd_partitions(void) {} +#endif static struct platform_device *rsk_devices[] __initdata = { &flash_device, -- GitLab From 9e24c7e2ac269486ab7c69ce50e944698e818fac Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 26 Oct 2009 10:12:39 +0000 Subject: [PATCH 0198/1165] sh: add uImage.bin target Add an uImage.bin target to allow uncompressed uImages. Useful for boards with busted u-boot decompression like the rsk7203 on my desk. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/Makefile | 2 +- arch/sh/boot/Makefile | 6 +++++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index fc51a918b31..9ab99fe7be5 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -199,7 +199,7 @@ endif libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) -BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \ +BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \ zImage vmlinux.srec romImage PHONY += maketools $(BOOT_TARGETS) FORCE diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index a1316872be6..cb8cf5572e7 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -20,11 +20,12 @@ CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000 CONFIG_ENTRY_OFFSET ?= 0x00001000 +suffix-y := bin suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma -targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma +targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma uImage.bin extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma subdir- := compressed romimage @@ -88,6 +89,9 @@ $(obj)/uImage.gz: $(obj)/vmlinux.bin.gz $(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma $(call if_changed,uimage,lzma) +$(obj)/uImage.bin: $(obj)/vmlinux.bin + $(call if_changed,uimage,none) + OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux $(call if_changed,objcopy) -- GitLab From ae1b22f6e46c03cede7cea234d0bf2253b4261cf Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 26 Oct 2009 14:26:04 +1030 Subject: [PATCH 0199/1165] x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-Pentium Commit 79e1dd05d1a22 "x86: Provide an alternative() based cmpxchg64()" broke lguest, even on systems which have cmpxchg8b support. The emulation code gets used until alternatives get run, but it contains native instructions, not their paravirt alternatives. The simplest fix is to turn this code off except for 386 and 486 builds. Reported-by: Johannes Stezenbach Signed-off-by: Rusty Russell Acked-by: H. Peter Anvin Cc: lguest@ozlabs.org Cc: Arjan van de Ven Cc: Jeremy Fitzhardinge Cc: Linus Torvalds LKML-Reference: <200910261426.05769.rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar --- arch/x86/Kconfig.cpu | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index f2824fb8c79..2649840d888 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -400,7 +400,7 @@ config X86_TSC config X86_CMPXCHG64 def_bool y - depends on X86_PAE || X86_64 || MCORE2 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MATOM + depends on !M386 && !M486 # this should be set for all -march=.. options where the compiler # generates cmov. -- GitLab From 72ed7de74e8f0fad0d8e567ae1f987b740accb3f Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 26 Oct 2009 11:11:43 +0100 Subject: [PATCH 0200/1165] x86: crash_dump: Fix non-pae kdump kernel memory accesses Non-PAE 32-bit dump kernels may wrap an address around 4G and poke unwanted space. ptes there are 32-bit long, and since pfn << PAGE_SIZE may exceed this limit, high pfn bits are cropped and wrong address mapped by kmap_atomic_pfn in copy_oldmem_page. Don't allow this behavior in non-PAE kdump kernels by checking pfns passed into copy_oldmem_page. In the case of failure, userspace process gets EFAULT. [v2] - fix comments - move ifdefs inside the function Signed-off-by: Jiri Slaby Cc: Vivek Goyal Cc: Eric W. Biederman Cc: Simon Horman Cc: Paul Mundt LKML-Reference: <1256551903-30567-1-git-send-email-jirislaby@gmail.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/crash_dump_32.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/x86/kernel/crash_dump_32.c b/arch/x86/kernel/crash_dump_32.c index f7cdb3b457a..cd97ce18c29 100644 --- a/arch/x86/kernel/crash_dump_32.c +++ b/arch/x86/kernel/crash_dump_32.c @@ -16,6 +16,22 @@ static void *kdump_buf_page; /* Stores the physical address of elf header of crash image. */ unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; +static inline bool is_crashed_pfn_valid(unsigned long pfn) +{ +#ifndef CONFIG_X86_PAE + /* + * non-PAE kdump kernel executed from a PAE one will crop high pte + * bits and poke unwanted space counting again from address 0, we + * don't want that. pte must fit into unsigned long. In fact the + * test checks high 12 bits for being zero (pfn will be shifted left + * by PAGE_SHIFT). + */ + return pte_pfn(pfn_pte(pfn, __pgprot(0))) == pfn; +#else + return true; +#endif +} + /** * copy_oldmem_page - copy one page from "oldmem" * @pfn: page frame number to be copied @@ -41,6 +57,9 @@ ssize_t copy_oldmem_page(unsigned long pfn, char *buf, if (!csize) return 0; + if (!is_crashed_pfn_valid(pfn)) + return -EFAULT; + vaddr = kmap_atomic_pfn(pfn, KM_PTE0); if (!userbuf) { -- GitLab From 141aeb9f26f9f12f1584c128ce8697cdffb046e7 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 26 Oct 2009 08:09:46 -0400 Subject: [PATCH 0201/1165] NFSv4: Fix two unbalanced put_rpccred() issues. Commits 29fba38b (nfs41: lease renewal) and fc01cea9 (nfs41: sequence operation) introduce a couple of put_rpccred() calls on credentials for which there is no corresponding get_rpccred(). See http://bugzilla.kernel.org/show_bug.cgi?id=14249 Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 65c25279886..ff37454fa78 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3065,9 +3065,6 @@ static void nfs4_renew_done(struct rpc_task *task, void *data) if (time_before(clp->cl_last_renewal,timestamp)) clp->cl_last_renewal = timestamp; spin_unlock(&clp->cl_lock); - dprintk("%s calling put_rpccred on rpc_cred %p\n", __func__, - task->tk_msg.rpc_cred); - put_rpccred(task->tk_msg.rpc_cred); } static const struct rpc_call_ops nfs4_renew_ops = { @@ -4882,7 +4879,6 @@ void nfs41_sequence_call_done(struct rpc_task *task, void *data) nfs41_sequence_free_slot(clp, task->tk_msg.rpc_resp); dprintk("%s rpc_cred %p\n", __func__, task->tk_msg.rpc_cred); - put_rpccred(task->tk_msg.rpc_cred); kfree(task->tk_msg.rpc_argp); kfree(task->tk_msg.rpc_resp); -- GitLab From 9a3936aac133037f65124fcb2d676a6c201a90a4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 26 Oct 2009 08:09:46 -0400 Subject: [PATCH 0202/1165] NFSv4: The link() operation should return any delegation on the file Otherwise, we have to wait for the server to recall it. Signed-off-by: Trond Myklebust --- fs/nfs/dir.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 32062c33c85..7cb298525ee 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1536,6 +1536,8 @@ nfs_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry) old_dentry->d_parent->d_name.name, old_dentry->d_name.name, dentry->d_parent->d_name.name, dentry->d_name.name); + nfs_inode_return_delegation(inode); + d_drop(dentry); error = NFS_PROTO(dir)->link(inode, dir, &dentry->d_name); if (error == 0) { -- GitLab From 960cc0f4fef607baabc2232fbd7cce5368a9dcfd Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Mon, 26 Oct 2009 08:59:17 +0100 Subject: [PATCH 0203/1165] block: use after free bug in __blkdev_get commit 0762b8bde9729f10f8e6249809660ff2ec3ad735 (from 14 months ago) introduced a use-after-free bug which has just recently started manifesting in my md testing. I tried git bisect to find out what caused the bug to start manifesting, and it could have been the recent change to blk_unregister_queue (48c0d4d4c04) but the results were inconclusive. This patch certainly fixes my symptoms and looks correct as the two calls are now in the same order as elsewhere in that function. Signed-off-by: NeilBrown Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/block_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/block_dev.c b/fs/block_dev.c index 9cf4b926f8e..8bed0557d88 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1248,8 +1248,8 @@ static int __blkdev_get(struct block_device *bdev, fmode_t mode, int for_part) bd_set_size(bdev, (loff_t)bdev->bd_part->nr_sects << 9); } } else { - put_disk(disk); module_put(disk->fops->owner); + put_disk(disk); disk = NULL; if (bdev->bd_contains == bdev) { if (bdev->bd_disk->fops->open) { -- GitLab From 81766741fe1eee3884219e8daaf03f466f2ed52f Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 26 Oct 2009 15:20:29 +0000 Subject: [PATCH 0204/1165] x86-64: Fix register leak in 32-bit syscall audting Restoring %ebp after the call to audit_syscall_exit() is not only unnecessary (because the register didn't get clobbered), but in the sysenter case wasn't even doing the right thing: It loaded %ebp from a location below the top of stack (RBP < ARGOFFSET), i.e. arbitrary kernel data got passed back to user mode in the register. Signed-off-by: Jan Beulich Acked-by: Roland McGrath Cc: LKML-Reference: <4AE5CC4D020000780001BD13@vpn.id2.novell.com> Signed-off-by: Ingo Molnar --- arch/x86/ia32/ia32entry.S | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 1733f9f65e8..581b0568fe1 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -204,7 +204,7 @@ sysexit_from_sys_call: movl RDI-ARGOFFSET(%rsp),%r8d /* reload 5th syscall arg */ .endm - .macro auditsys_exit exit,ebpsave=RBP + .macro auditsys_exit exit testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10) jnz ia32_ret_from_sys_call TRACE_IRQS_ON @@ -217,7 +217,6 @@ sysexit_from_sys_call: call audit_syscall_exit GET_THREAD_INFO(%r10) movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall return value */ - movl \ebpsave-ARGOFFSET(%rsp),%ebp /* reload user register value */ movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi cli TRACE_IRQS_OFF @@ -351,7 +350,7 @@ cstar_auditsys: jmp cstar_dispatch sysretl_audit: - auditsys_exit sysretl_from_sys_call, RCX /* user %ebp in RCX slot */ + auditsys_exit sysretl_from_sys_call #endif cstar_tracesys: -- GitLab From e73486b8c9d8d649dd080eb1b810e5b0c11a955a Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 23 Sep 2009 12:59:07 +0900 Subject: [PATCH 0205/1165] ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value Fix the values of S3C6400_CLKDIV0_ARM_MASK and S3C6410_CLKDIV0_ARM_MASK. Signed-off-by: Kukjin Kim Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/include/plat/regs-clock.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h index a8777a755df..ff46e7fa957 100644 --- a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h +++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h @@ -51,8 +51,8 @@ #define S3C6400_CLKDIV0_HCLK_SHIFT (8) #define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) #define S3C6400_CLKDIV0_MPLL_SHIFT (4) -#define S3C6400_CLKDIV0_ARM_MASK (0x3 << 0) -#define S3C6410_CLKDIV0_ARM_MASK (0x7 << 0) +#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0) +#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0) #define S3C6400_CLKDIV0_ARM_SHIFT (0) /* CLKDIV1 */ -- GitLab From e179ac0f4ea4f1e989fa754bada366f88fd81d27 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 21 Oct 2009 18:17:58 +0100 Subject: [PATCH 0206/1165] ARM: S3C64XX: Set rate of crystal mux The current code assumes that the external clock mux will be set to the crystal. Set this up explicitly within the clock API. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/s3c6400-clock.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c index 9745852261e..6ffa21eb1b9 100644 --- a/arch/arm/plat-s3c64xx/s3c6400-clock.c +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -677,6 +677,9 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + /* For now assume the mux always selects the crystal */ + clk_ext_xtal_mux.parent = xtal_clk; + epll = s3c6400_get_epll(xtal); mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); -- GitLab From a5c461bb3f74646d99464652cd5363e88434c3e1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 27 Oct 2009 07:17:12 +0900 Subject: [PATCH 0207/1165] sh: Document uImage.bin target in archhelp. This was missing from the previous patch. Reported-by: Mike Frysinger Signed-off-by: Paul Mundt --- arch/sh/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 9ab99fe7be5..66e40aabc60 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -225,6 +225,7 @@ define archhelp @echo ' vmlinux.srec - Create an ELF S-record' @echo '* uImage - Alias to bootable U-Boot image' @echo ' uImage.srec - Create an S-record for U-Boot' + @echo ' uImage.bin - Kernel-only image for U-Boot (bin)' @echo '* uImage.gz - Kernel-only image for U-Boot (gzip)' @echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)' @echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)' -- GitLab From ffb4a73d8906f71910e6c83ec2b499e70025ee8e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 27 Oct 2009 07:22:37 +0900 Subject: [PATCH 0208/1165] sh: Fix hugetlbfs dependencies for SH-3 && MMU configurations. The hugetlb dependencies presently depend on SUPERH && MMU while the hugetlb page size definitions depend on CPU_SH4 or CPU_SH5. This unfortunately allows SH-3 + MMU configurations to enable hugetlbfs without a corresponding HPAGE_SHIFT definition, resulting in the build blowing up. As SH-3 doesn't support variable page sizes, we tighten up the dependenies a bit to prevent hugetlbfs from being enabled. These days we also have a shiny new SYS_SUPPORTS_HUGETLBFS, so switch to using that rather than adding to the list of corner cases in fs/Kconfig. Reported-by: Kristoffer Ericson Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 5 +++++ arch/sh/mm/Kconfig | 2 +- fs/Kconfig | 4 ++-- 3 files changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0dc7e3cbeff..88cdeb9f72d 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -121,6 +121,9 @@ config SYS_SUPPORTS_APM_EMULATION bool select ARCH_SUSPEND_POSSIBLE +config SYS_SUPPORTS_HUGETLBFS + bool + config SYS_SUPPORTS_SMP bool @@ -195,6 +198,7 @@ config CPU_SH4 select CPU_HAS_SR_RB select CPU_HAS_FPU if !CPU_SH4AL_DSP select SYS_SUPPORTS_TMU + select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SH4A bool @@ -209,6 +213,7 @@ config CPU_SH5 bool select CPU_HAS_FPU select SYS_SUPPORTS_TMU + select SYS_SUPPORTS_HUGETLBFS if MMU config CPU_SHX2 bool diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 64dc1ad5980..7f7b52f9beb 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -227,7 +227,7 @@ endchoice choice prompt "HugeTLB page size" - depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU + depends on HUGETLB_PAGE default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB default HUGETLB_PAGE_SIZE_64K diff --git a/fs/Kconfig b/fs/Kconfig index d4bf8caad8d..48b81f92a50 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -135,8 +135,8 @@ config TMPFS_POSIX_ACL config HUGETLBFS bool "HugeTLB file system support" - depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || \ - (S390 && 64BIT) || SYS_SUPPORTS_HUGETLBFS || BROKEN + depends on X86 || IA64 || PPC64 || SPARC64 || (S390 && 64BIT) || \ + SYS_SUPPORTS_HUGETLBFS || BROKEN help hugetlbfs is a filesystem backing for HugeTLB pages, based on ramfs. For architectures that support it, say Y here and read -- GitLab From 6d9f4fc420571ab67c962ef0d94449127218f66e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 26 Oct 2009 11:31:47 +0000 Subject: [PATCH 0209/1165] igb: fix memory leak when setting ring size while interface is down Changing ring sizes while the interface was down was causing a double allocation of the receive and transmit rings. This issue is amplified when there are multiple rings enabled. To prevent this we need to add an additional check which will just update the ring counts when the interface is not up and skip the allocation steps. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_ethtool.c | 35 ++++++++++++++++++++++------------- 1 file changed, 22 insertions(+), 13 deletions(-) diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index d004c359244..aab3d971af5 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -731,7 +731,7 @@ static int igb_set_ringparam(struct net_device *netdev, { struct igb_adapter *adapter = netdev_priv(netdev); struct igb_ring *temp_ring; - int i, err; + int i, err = 0; u32 new_rx_count, new_tx_count; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -751,18 +751,30 @@ static int igb_set_ringparam(struct net_device *netdev, return 0; } + while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) + msleep(1); + + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto clear_reset; + } + if (adapter->num_tx_queues > adapter->num_rx_queues) temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring)); else temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring)); - if (!temp_ring) - return -ENOMEM; - while (test_and_set_bit(__IGB_RESETTING, &adapter->state)) - msleep(1); + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } - if (netif_running(adapter->netdev)) - igb_down(adapter); + igb_down(adapter); /* * We can't just free everything and then setup again, @@ -819,14 +831,11 @@ static int igb_set_ringparam(struct net_device *netdev, adapter->rx_ring_count = new_rx_count; } - - err = 0; err_setup: - if (netif_running(adapter->netdev)) - igb_up(adapter); - - clear_bit(__IGB_RESETTING, &adapter->state); + igb_up(adapter); vfree(temp_ring); +clear_reset: + clear_bit(__IGB_RESETTING, &adapter->state); return err; } -- GitLab From 759884b4d4cbafcd3f222b29cd6e0c2cbc542d2b Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 26 Oct 2009 11:32:05 +0000 Subject: [PATCH 0210/1165] ixgbe: fix memory leak when resizing rings while interface is down This patch resolves a memory leak that occurs when you resize the rings via the ethtool -G option while the interface is down. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_ethtool.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c index fa314cb005a..856c18c207f 100644 --- a/drivers/net/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ixgbe/ixgbe_ethtool.c @@ -798,7 +798,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev, { struct ixgbe_adapter *adapter = netdev_priv(netdev); struct ixgbe_ring *temp_tx_ring, *temp_rx_ring; - int i, err; + int i, err = 0; u32 new_rx_count, new_tx_count; bool need_update = false; @@ -822,6 +822,16 @@ static int ixgbe_set_ringparam(struct net_device *netdev, while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) msleep(1); + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i].count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i].count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto err_setup; + } + temp_tx_ring = kcalloc(adapter->num_tx_queues, sizeof(struct ixgbe_ring), GFP_KERNEL); if (!temp_tx_ring) { @@ -879,8 +889,7 @@ static int ixgbe_set_ringparam(struct net_device *netdev, /* if rings need to be updated, here's the place to do it in one shot */ if (need_update) { - if (netif_running(netdev)) - ixgbe_down(adapter); + ixgbe_down(adapter); /* tx */ if (new_tx_count != adapter->tx_ring_count) { @@ -897,13 +906,8 @@ static int ixgbe_set_ringparam(struct net_device *netdev, temp_rx_ring = NULL; adapter->rx_ring_count = new_rx_count; } - } - - /* success! */ - err = 0; - if (netif_running(netdev)) ixgbe_up(adapter); - + } err_setup: clear_bit(__IXGBE_RESETTING, &adapter->state); return err; -- GitLab From 39305965f31e080d6ed96e0ff51ed11e7639d52e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Mon, 26 Oct 2009 11:32:25 +0000 Subject: [PATCH 0211/1165] igbvf: fix memory leak when ring size changed while interface down This patch resolves a memory leak which occurs while changing the ring size while the interface is down. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igbvf/ethtool.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c index ee17a097d1c..c68265bd0d1 100644 --- a/drivers/net/igbvf/ethtool.c +++ b/drivers/net/igbvf/ethtool.c @@ -279,7 +279,7 @@ static int igbvf_set_ringparam(struct net_device *netdev, { struct igbvf_adapter *adapter = netdev_priv(netdev); struct igbvf_ring *temp_ring; - int err; + int err = 0; u32 new_rx_count, new_tx_count; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -299,15 +299,22 @@ static int igbvf_set_ringparam(struct net_device *netdev, return 0; } - temp_ring = vmalloc(sizeof(struct igbvf_ring)); - if (!temp_ring) - return -ENOMEM; - while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state)) msleep(1); - if (netif_running(adapter->netdev)) - igbvf_down(adapter); + if (!netif_running(adapter->netdev)) { + adapter->tx_ring->count = new_tx_count; + adapter->rx_ring->count = new_rx_count; + goto clear_reset; + } + + temp_ring = vmalloc(sizeof(struct igbvf_ring)); + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } + + igbvf_down(adapter); /* * We can't just free everything and then setup again, @@ -339,14 +346,11 @@ static int igbvf_set_ringparam(struct net_device *netdev, memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring)); } - - err = 0; err_setup: - if (netif_running(adapter->netdev)) - igbvf_up(adapter); - - clear_bit(__IGBVF_RESETTING, &adapter->state); + igbvf_up(adapter); vfree(temp_ring); +clear_reset: + clear_bit(__IGBVF_RESETTING, &adapter->state); return err; } -- GitLab From db2932ecf8dc07f65b410e921f96c5c51170c0ae Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 26 Oct 2009 11:22:47 +0000 Subject: [PATCH 0212/1165] e1000e: clear PHY wakeup bit after LCD reset on 82577/82578 Performing a dummy read of the PHY Wakeup Control (WUC) register clears the wakeup enable bit set by an PHY reset. If this bit remains set, link problems may occur. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index aa0ab0eb8c7..ead66510e22 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -844,7 +844,7 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) u32 i; u32 data, cnf_size, cnf_base_addr, sw_cfg_mask; s32 ret_val; - u16 word_addr, reg_data, reg_addr, phy_page = 0; + u16 reg, word_addr, reg_data, reg_addr, phy_page = 0; ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) @@ -859,6 +859,10 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) return ret_val; } + /* Dummy read to clear the phy wakeup bit after lcd reset */ + if (hw->mac.type == e1000_pchlan) + e1e_rphy(hw, BM_WUC, ®); + /* * Initialize the PHY from the NVM on ICH platforms. This * is needed due to an issue where the NVM configuration is @@ -2229,6 +2233,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) { + u16 reg; u32 ctrl, icr, kab; s32 ret_val; @@ -2304,6 +2309,9 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) hw_dbg(hw, "Auto Read Done did not complete\n"); } } + /* Dummy read to clear the phy wakeup bit after lcd reset */ + if (hw->mac.type == e1000_pchlan) + e1e_rphy(hw, BM_WUC, ®); /* * For PCH, this write will make sure that any noise -- GitLab From 53ac5a887519f0c3fc94a6acdfc22aa4e97f64f7 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 26 Oct 2009 11:23:06 +0000 Subject: [PATCH 0213/1165] e1000e: increase swflag acquisition timeout for ICHx/PCH In some conditions (e.g. when AMT is enabled on the system), it is possible to take an extended period of time to for the driver to acquire the sw/fw/hw hardware semaphore used to protect against concurrent access of a shared resource (e.g. PHY registers). This could cause PHY registers to not get configured properly resulting in link issues. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index ead66510e22..fb2222d60a7 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -122,6 +122,8 @@ #define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */ +#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -599,7 +601,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) goto out; } - timeout = PHY_CFG_TIMEOUT * 2; + timeout = SW_FLAG_TIMEOUT; extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); -- GitLab From fa2ce13ca7a415332181adf2eb06d39e8e5054f7 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 26 Oct 2009 11:23:25 +0000 Subject: [PATCH 0214/1165] e1000e: 82577/82578 requires a different method to configure LPLU Unlike previous ICHx-based parts, the PCH-based parts (82577/82578) require LPLU (Low Power Link Up, or "reverse auto-negotiation") to be configured in the PHY rather than the MAC. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 40 ++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index fb2222d60a7..2451dc8aef7 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -124,6 +124,11 @@ #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ +/* OEM Bits Phy Register */ +#define HV_OEM_BITS PHY_REG(768, 25) +#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ +#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -202,6 +207,7 @@ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw); static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); +static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -244,6 +250,8 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; phy->ops.read_phy_reg = e1000_read_phy_reg_hv; + phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; + phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.write_phy_reg = e1000_write_phy_reg_hv; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; @@ -1059,6 +1067,38 @@ static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw) return ret_val; } +/** + * e1000_set_lplu_state_pchlan - Set Low Power Link Up state + * @hw: pointer to the HW structure + * @active: true to enable LPLU, false to disable + * + * Sets the LPLU state according to the active flag. For PCH, if OEM write + * bit are disabled in the NVM, writing the LPLU bits in the MAC will not set + * the phy speed. This function will manually set the LPLU bit and restart + * auto-neg as hw would do. D3 and D0 LPLU will call the same function + * since it configures the same bit. + **/ +static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active) +{ + s32 ret_val = 0; + u16 oem_reg; + + ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg); + if (ret_val) + goto out; + + if (active) + oem_reg |= HV_OEM_BITS_LPLU; + else + oem_reg &= ~HV_OEM_BITS_LPLU; + + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg); + +out: + return ret_val; +} + /** * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state * @hw: pointer to the HW structure -- GitLab From ca15df58b1b98f073393eef3704674b45d1cb474 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 26 Oct 2009 11:23:43 +0000 Subject: [PATCH 0215/1165] e1000e: separate mutex usage between NVM and PHY/CSR register for ICHx/PCH Accesses to NVM and PHY/CSR registers on ICHx/PCH-based parts are protected from concurrent accesses with a mutex that is acquired when the access is initiated and released when the access has completed. However, the two types of accesses should not be protected by the same mutex because the driver may have to access the NVM while already holding the mutex over several consecutive PHY/CSR accesses which would result in livelock. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 89 +++++++++++++++++++++++------------- 1 file changed, 58 insertions(+), 31 deletions(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 2451dc8aef7..aaaaf2ca408 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -577,13 +577,40 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) static DEFINE_MUTEX(nvm_mutex); +/** + * e1000_acquire_nvm_ich8lan - Acquire NVM mutex + * @hw: pointer to the HW structure + * + * Acquires the mutex for performing NVM operations. + **/ +static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw) +{ + mutex_lock(&nvm_mutex); + + return 0; +} + +/** + * e1000_release_nvm_ich8lan - Release NVM mutex + * @hw: pointer to the HW structure + * + * Releases the mutex used while performing NVM operations. + **/ +static void e1000_release_nvm_ich8lan(struct e1000_hw *hw) +{ + mutex_unlock(&nvm_mutex); + + return; +} + +static DEFINE_MUTEX(swflag_mutex); + /** * e1000_acquire_swflag_ich8lan - Acquire software control flag * @hw: pointer to the HW structure * - * Acquires the software control flag for performing NVM and PHY - * operations. This is a function pointer entry point only called by - * read/write routines for the PHY and NVM parts. + * Acquires the software control flag for performing PHY and select + * MAC CSR accesses. **/ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) { @@ -592,7 +619,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) might_sleep(); - mutex_lock(&nvm_mutex); + mutex_lock(&swflag_mutex); while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); @@ -633,7 +660,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) out: if (ret_val) - mutex_unlock(&nvm_mutex); + mutex_unlock(&swflag_mutex); return ret_val; } @@ -642,9 +669,8 @@ out: * e1000_release_swflag_ich8lan - Release software control flag * @hw: pointer to the HW structure * - * Releases the software control flag for performing NVM and PHY operations. - * This is a function pointer entry point only called by read/write - * routines for the PHY and NVM parts. + * Releases the software control flag for performing PHY and select + * MAC CSR accesses. **/ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) { @@ -654,7 +680,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); - mutex_unlock(&nvm_mutex); + mutex_unlock(&swflag_mutex); + + return; } /** @@ -1360,12 +1388,11 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || (words == 0)) { hw_dbg(hw, "nvm parameter(s) out of bounds\n"); - return -E1000_ERR_NVM; + ret_val = -E1000_ERR_NVM; + goto out; } - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - goto out; + nvm->ops.acquire_nvm(hw); ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { @@ -1391,7 +1418,7 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, } } - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); out: if (ret_val) @@ -1649,11 +1676,15 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, return -E1000_ERR_NVM; } + nvm->ops.acquire_nvm(hw); + for (i = 0; i < words; i++) { dev_spec->shadow_ram[offset+i].modified = 1; dev_spec->shadow_ram[offset+i].value = data[i]; } + nvm->ops.release_nvm(hw); + return 0; } @@ -1683,9 +1714,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (nvm->type != e1000_nvm_flash_sw) goto out; - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - goto out; + nvm->ops.acquire_nvm(hw); /* * We're writing to the opposite bank so if we're on bank 1, @@ -1703,7 +1732,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) old_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } } else { @@ -1711,7 +1740,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) new_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } } @@ -1769,7 +1798,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (ret_val) { /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ hw_dbg(hw, "Flash commit failed.\n"); - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1782,7 +1811,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } data &= 0xBFFF; @@ -1790,7 +1819,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset * 2 + 1, (u8)(data >> 8)); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1803,7 +1832,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0); if (ret_val) { - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); goto out; } @@ -1813,7 +1842,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) dev_spec->shadow_ram[i].value = 0xFFFF; } - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); /* * Reload the EEPROM, or else modifications will not appear @@ -1877,14 +1906,12 @@ static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw) **/ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) { + struct e1000_nvm_info *nvm = &hw->nvm; union ich8_flash_protected_range pr0; union ich8_hws_flash_status hsfsts; u32 gfpreg; - s32 ret_val; - ret_val = e1000_acquire_swflag_ich8lan(hw); - if (ret_val) - return; + nvm->ops.acquire_nvm(hw); gfpreg = er32flash(ICH_FLASH_GFPREG); @@ -1905,7 +1932,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) hsfsts.hsf_status.flockdn = true; ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); - e1000_release_swflag_ich8lan(hw); + nvm->ops.release_nvm(hw); } /** @@ -3162,9 +3189,9 @@ static struct e1000_phy_operations ich8_phy_ops = { }; static struct e1000_nvm_operations ich8_nvm_ops = { - .acquire_nvm = e1000_acquire_swflag_ich8lan, + .acquire_nvm = e1000_acquire_nvm_ich8lan, .read_nvm = e1000_read_nvm_ich8lan, - .release_nvm = e1000_release_swflag_ich8lan, + .release_nvm = e1000_release_nvm_ich8lan, .update_nvm = e1000_update_nvm_checksum_ich8lan, .valid_led_default = e1000_valid_led_default_ich8lan, .validate_nvm = e1000_validate_nvm_checksum_ich8lan, -- GitLab From 5ccdcecb72692d46d7a9264e62751241c7eca559 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Mon, 26 Oct 2009 11:24:02 +0000 Subject: [PATCH 0216/1165] e1000e: allow for swflag to be held over consecutive PHY accesses PCH-based parts (82577/82578) and some ICH8-based parts (82566) need to hold the swflag (sw/fw/hw hardware semaphore) over consecutive PHY accesses in order to perform sw-driven PHY configuration during initialization to workaround known hardware issues (see follow-on patch). This patch provides new PHY read/write functions (and function pointers) that will allow accessing the PHY registers assuming the swflag has already been acquired. The actual PHY register access code has moved into helper functions that are called with a flag indicating whether or not the swflag has already been acquired and acquires/releases it if not. The functions called from within the updated PHY access functions had to be updated to assume the swflag was already acquired, and other functions that called those functions were also updated to acquire/release the swflag. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 12 + drivers/net/e1000e/hw.h | 2 + drivers/net/e1000e/ich8lan.c | 4 + drivers/net/e1000e/phy.c | 469 ++++++++++++++++++++++++----------- 4 files changed, 346 insertions(+), 141 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 981936c1fb4..405a144ebca 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -519,9 +519,13 @@ extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw); extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw); extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw); extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw); extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active); extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw); extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw); extern s32 e1000e_get_cfg_done(struct e1000_hw *hw); @@ -538,7 +542,11 @@ extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data); extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl); extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, u32 usec_interval, bool *success); extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); @@ -546,7 +554,11 @@ extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000e_check_downshift(struct e1000_hw *hw); extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data); +extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, + u16 *data); extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data); +extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, + u16 data); extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow); extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw); extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw); diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index fd44d9f9076..7b05cf47f7f 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -764,11 +764,13 @@ struct e1000_phy_operations { s32 (*get_cable_length)(struct e1000_hw *); s32 (*get_phy_info)(struct e1000_hw *); s32 (*read_phy_reg)(struct e1000_hw *, u32, u16 *); + s32 (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *); void (*release_phy)(struct e1000_hw *); s32 (*reset_phy)(struct e1000_hw *); s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); s32 (*write_phy_reg)(struct e1000_hw *, u32, u16); + s32 (*write_phy_reg_locked)(struct e1000_hw *, u32, u16); s32 (*cfg_on_link_up)(struct e1000_hw *); }; diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index aaaaf2ca408..b6388b9535f 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -250,9 +250,11 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; phy->ops.read_phy_reg = e1000_read_phy_reg_hv; + phy->ops.read_phy_reg_locked = e1000_read_phy_reg_hv_locked; phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.write_phy_reg = e1000_write_phy_reg_hv; + phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; @@ -313,6 +315,8 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) case IGP03E1000_E_PHY_ID: phy->type = e1000_phy_igp_3; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked; + phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked; break; case IFE_E_PHY_ID: case IFE_PLUS_E_PHY_ID: diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 994401fd066..f9d33ab05e9 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -164,16 +164,25 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) * MDIC mode. No harm in trying again in this case since * the PHY ID is unknown at this point anyway */ + ret_val = phy->ops.acquire_phy(hw); + if (ret_val) + goto out; ret_val = e1000_set_mdio_slow_mode_hv(hw, true); if (ret_val) goto out; + phy->ops.release_phy(hw); retry_count++; } out: /* Revert to MDIO fast mode, if applicable */ - if (retry_count) + if (retry_count) { + ret_val = phy->ops.acquire_phy(hw); + if (ret_val) + return ret_val; ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + phy->ops.release_phy(hw); + } return ret_val; } @@ -354,94 +363,173 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) } /** - * e1000e_read_phy_reg_igp - Read igp PHY register + * __e1000e_read_phy_reg_igp - Read igp PHY register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retrieved information in data. Release any acquired + * and stores the retrieved information in data. Release any acquired * semaphores before exiting. **/ -s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } if (offset > MAX_PHY_MULTI_PAGE_REG) { ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (u16)offset); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto release; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); - - hw->phy.ops.release_phy(hw); + data); +release: + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } +/** + * e1000e_read_phy_reg_igp - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores the + * retrieved information in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000e_read_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000e_read_phy_reg_igp_locked - Read igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000e_read_phy_reg_igp(hw, offset, data, true); +} + /** * e1000e_write_phy_reg_igp - Write igp PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then writes the data to PHY register * at the offset. Release any acquired semaphores before exiting. **/ -s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } if (offset > MAX_PHY_MULTI_PAGE_REG) { ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (u16)offset); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto release; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); +release: + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } /** - * e1000e_read_kmrn_reg - Read kumeran register + * e1000e_write_phy_reg_igp - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register + * at the offset. Release any acquired semaphores before exiting. + **/ +s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000e_write_phy_reg_igp(hw, offset, data, false); +} + +/** + * e1000e_write_phy_reg_igp_locked - Write igp PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. + * Assumes semaphore already acquired. + **/ +s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000e_write_phy_reg_igp(hw, offset, data, true); +} + +/** + * __e1000_read_kmrn_reg - Read kumeran register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary. Then reads the PHY register at offset * using the kumeran interface. The information retrieved is stored in data. * Release any acquired semaphores before exiting. **/ -s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { u32 kmrnctrlsta; - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; @@ -452,40 +540,110 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) kmrnctrlsta = er32(KMRNCTRLSTA); *data = (u16)kmrnctrlsta; - hw->phy.ops.release_phy(hw); + if (!locked) + hw->phy.ops.release_phy(hw); +out: return ret_val; } /** - * e1000e_write_kmrn_reg - Write kumeran register + * e1000e_read_kmrn_reg - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset using the + * kumeran interface. The information retrieved is stored in data. + * Release the acquired semaphore before exiting. + **/ +s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000_read_kmrn_reg_locked - Read kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset using the kumeran interface. The + * information retrieved is stored in data. + * Assumes semaphore already acquired. + **/ +s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_kmrn_reg(hw, offset, data, true); +} + +/** + * __e1000_write_kmrn_reg - Write kumeran register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary. Then write the data to PHY register * at the offset using the kumeran interface. Release any acquired semaphores * before exiting. **/ -s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { u32 kmrnctrlsta; - s32 ret_val; + s32 ret_val = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; + if (!locked) { + if (!(hw->phy.ops.acquire_phy)) + goto out; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & E1000_KMRNCTRLSTA_OFFSET) | data; ew32(KMRNCTRLSTA, kmrnctrlsta); udelay(2); - hw->phy.ops.release_phy(hw); + if (!locked) + hw->phy.ops.release_phy(hw); + +out: return ret_val; } +/** + * e1000e_write_kmrn_reg - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to the PHY register at the offset + * using the kumeran interface. Release the acquired semaphore before exiting. + **/ +s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, false); +} + +/** + * e1000_write_kmrn_reg_locked - Write kumeran register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Write the data to PHY register at the offset using the kumeran interface. + * Assumes semaphore already acquired. + **/ +s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_kmrn_reg(hw, offset, data, true); +} + /** * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link * @hw: pointer to the HW structure @@ -2105,6 +2263,10 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, @@ -2112,10 +2274,6 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2135,18 +2293,15 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) /* Page is shifted left, PHY expects (page x 32) */ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, (page << page_shift)); - if (ret_val) { - hw->phy.ops.release_phy(hw); + if (ret_val) goto out; - } } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); - out: + hw->phy.ops.release_phy(hw); return ret_val; } @@ -2167,6 +2322,10 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, @@ -2174,10 +2333,6 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset); if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2197,17 +2352,14 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) /* Page is shifted left, PHY expects (page x 32) */ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, (page << page_shift)); - if (ret_val) { - hw->phy.ops.release_phy(hw); + if (ret_val) goto out; - } } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); - out: + hw->phy.ops.release_phy(hw); return ret_val; } @@ -2226,17 +2378,17 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data, true); - return ret_val; + goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - hw->phy.addr = 1; if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2245,16 +2397,14 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, page); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); +out: hw->phy.ops.release_phy(hw); - return ret_val; } @@ -2272,17 +2422,17 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + /* Page 800 works differently than the rest so it has its own func */ if (page == BM_WUC_PAGE) { ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data, false); - return ret_val; + goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - hw->phy.addr = 1; if (offset > MAX_PHY_MULTI_PAGE_REG) { @@ -2290,17 +2440,15 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT, page); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); +out: hw->phy.ops.release_phy(hw); - return ret_val; } @@ -2320,6 +2468,8 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) * 3) Write the address using the address opcode (0x11) * 4) Read or write the data using the data opcode (0x12) * 5) Restore 769_17.2 to its original value + * + * Assumes semaphore already acquired. **/ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data, bool read) @@ -2327,20 +2477,12 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, s32 ret_val; u16 reg = BM_PHY_REG_NUM(offset); u16 phy_reg = 0; - u8 phy_acquired = 1; - /* Gig must be disabled for MDIO accesses to page 800 */ if ((hw->mac.type == e1000_pchlan) && (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE))) hw_dbg(hw, "Attempting to access page 800 while gig enabled\n"); - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) { - phy_acquired = 0; - goto out; - } - /* All operations in this function are phy address 1 */ hw->phy.addr = 1; @@ -2397,8 +2539,6 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg); out: - if (phy_acquired == 1) - hw->phy.ops.release_phy(hw); return ret_val; } @@ -2439,52 +2579,63 @@ static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) return 0; } +/** + * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode + * @hw: pointer to the HW structure + * @slow: true for slow mode, false for normal mode + * + * Assumes semaphore already acquired. + **/ s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow) { s32 ret_val = 0; u16 data = 0; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - return ret_val; - /* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */ hw->phy.addr = 1; ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - return ret_val; - } + if (ret_val) + goto out; + ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1, (0x2180 | (slow << 10))); + if (ret_val) + goto out; /* dummy read when reverting to fast mode - throw away result */ if (!slow) - e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); - - hw->phy.ops.release_phy(hw); + ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data); +out: return ret_val; } /** - * e1000_read_phy_reg_hv - Read HV PHY register + * __e1000_read_phy_reg_hv - Read HV PHY register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retrieved information in data. Release any acquired + * and stores the retrieved information in data. Release any acquired * semaphore before exiting. **/ -s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) +static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, + bool locked) { s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); bool in_slow_mode = false; + if (!locked) { + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + } + /* Workaround failure in MDIO access while cable is disconnected */ if ((hw->phy.type == e1000_phy_82577) && !(er32(STATUS) & E1000_STATUS_LU)) { @@ -2508,10 +2659,6 @@ s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_hv_page(page); if (page == HV_INTC_FC_PAGE_START) @@ -2529,42 +2676,76 @@ s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (page << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - goto out; - } hw->phy.addr = phy_addr; } } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); - hw->phy.ops.release_phy(hw); - out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + if (!locked) + hw->phy.ops.release_phy(hw); + return ret_val; } /** - * e1000_write_phy_reg_hv - Write HV PHY register + * e1000_read_phy_reg_hv - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Acquires semaphore then reads the PHY register at offset and stores + * the retrieved information in data. Release the acquired semaphore + * before exiting. + **/ +s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, false); +} + +/** + * e1000_read_phy_reg_hv_locked - Read HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to be read + * @data: pointer to the read data + * + * Reads the PHY register at offset and stores the retrieved information + * in data. Assumes semaphore already acquired. + **/ +s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data) +{ + return __e1000_read_phy_reg_hv(hw, offset, data, true); +} + +/** + * __e1000_write_phy_reg_hv - Write HV PHY register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset + * @locked: semaphore has already been acquired or not * * Acquires semaphore, if necessary, then writes the data to PHY register * at the offset. Release any acquired semaphores before exiting. **/ -s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) +static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, + bool locked) { s32 ret_val; u16 page = BM_PHY_REG_PAGE(offset); u16 reg = BM_PHY_REG_NUM(offset); bool in_slow_mode = false; + if (!locked) { + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + } + /* Workaround failure in MDIO access while cable is disconnected */ if ((hw->phy.type == e1000_phy_82577) && !(er32(STATUS) & E1000_STATUS_LU)) { @@ -2588,10 +2769,6 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) goto out; } - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; - hw->phy.addr = e1000_get_phy_addr_for_hv_page(page); if (page == HV_INTC_FC_PAGE_START) @@ -2607,15 +2784,10 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) { u16 data2 = 0x7EFF; - hw->phy.ops.release_phy(hw); ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3, &data2, false); if (ret_val) goto out; - - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) - goto out; } if (reg > MAX_PHY_MULTI_PAGE_REG) { @@ -2630,26 +2802,52 @@ s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, (page << IGP_PAGE_SHIFT)); - if (ret_val) { - hw->phy.ops.release_phy(hw); - goto out; - } hw->phy.addr = phy_addr; } } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, data); - hw->phy.ops.release_phy(hw); out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + if (!locked) + hw->phy.ops.release_phy(hw); + return ret_val; } +/** + * e1000_write_phy_reg_hv - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Acquires semaphore then writes the data to PHY register at the offset. + * Release the acquired semaphores before exiting. + **/ +s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, false); +} + +/** + * e1000_write_phy_reg_hv_locked - Write HV PHY register + * @hw: pointer to the HW structure + * @offset: register offset to write to + * @data: data to write at register offset + * + * Writes the data to PHY register at the offset. Assumes semaphore + * already acquired. + **/ +s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data) +{ + return __e1000_write_phy_reg_hv(hw, offset, data, true); +} + /** * e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page * @page: page to be accessed @@ -2671,10 +2869,9 @@ static u32 e1000_get_phy_addr_for_hv_page(u32 page) * @data: pointer to the data to be read or written * @read: determines if operation is read or written * - * Acquires semaphore, if necessary, then reads the PHY register at offset - * and storing the retreived information in data. Release any acquired - * semaphores before exiting. Note that the procedure to read these regs - * uses the address port and data port to read/write. + * Reads the PHY register at offset and stores the retreived information + * in data. Assumes semaphore already acquired. Note that the procedure + * to read these regs uses the address port and data port to read/write. **/ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, u16 *data, bool read) @@ -2682,20 +2879,12 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, s32 ret_val; u32 addr_reg = 0; u32 data_reg = 0; - u8 phy_acquired = 1; /* This takes care of the difference with desktop vs mobile phy */ addr_reg = (hw->phy.type == e1000_phy_82578) ? I82578_ADDR_REG : I82577_ADDR_REG; data_reg = addr_reg + 1; - ret_val = hw->phy.ops.acquire_phy(hw); - if (ret_val) { - hw_dbg(hw, "Could not acquire PHY\n"); - phy_acquired = 0; - goto out; - } - /* All operations in this function are phy address 2 */ hw->phy.addr = 2; @@ -2718,8 +2907,6 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, } out: - if (phy_acquired == 1) - hw->phy.ops.release_phy(hw); return ret_val; } -- GitLab From 14f572fa38c55fbe369127b808a4a79b0bbec367 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 Oct 2009 11:07:05 +0100 Subject: [PATCH 0217/1165] mfd: Always initialise WM831x IRQ mutex This avoids crashes when running without interrupt support. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c index d3015dfb913..ac056ea6b66 100644 --- a/drivers/mfd/wm831x-irq.c +++ b/drivers/mfd/wm831x-irq.c @@ -507,6 +507,8 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq) { int i, ret; + mutex_init(&wm831x->irq_lock); + if (!irq) { dev_warn(wm831x->dev, "No interrupt specified - functionality limited\n"); @@ -521,7 +523,6 @@ int wm831x_irq_init(struct wm831x *wm831x, int irq) } wm831x->irq = irq; - mutex_init(&wm831x->irq_lock); INIT_WORK(&wm831x->irq_work, wm831x_irq_worker); /* Mask the individual interrupt sources */ -- GitLab From a8643430bc82aa3d272b21df2e1feb502bb8aacb Mon Sep 17 00:00:00 2001 From: Ilkka Koskinen Date: Tue, 20 Oct 2009 16:22:52 +0300 Subject: [PATCH 0218/1165] mfd: Do not dereference null pointer in twl4030 error path We are mistakenly dereferencing twl->client in the twl->client null checking path. Signed-off-by: Ilkka Koskinen Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index e832e975da6..a1c47ee95c0 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -795,7 +795,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) twl->client = i2c_new_dummy(client->adapter, twl->address); if (!twl->client) { - dev_err(&twl->client->dev, + dev_err(&client->dev, "can't attach client %d\n", i); status = -ENOMEM; goto fail; -- GitLab From fb64bb560e181363c29ed4fe12a0d82765d61733 Mon Sep 17 00:00:00 2001 From: Michal Ostrowski Date: Mon, 26 Oct 2009 16:23:20 -0700 Subject: [PATCH 0219/1165] PPPoE: Fix flush/close races. Be more careful about the state of pointers during tear-down. The "pppoe_dev" field can only be looked at safely while holding socket locks. This subsequently allows for the flush_lock to be killed. We depend on the PPPOX_CONNECTED state to tell us that that those fields are valid, so whoever clears that state (pppox_unbind_sock()) is responsible for the dev_put() call. We also have to ensure that we delete_item() on all sockets before they are cleaned up. The need for these changes has been exposed by scenarios wherein namespace bindings of ethernet devices change while there are ongoing PPPoE sessions, which resulted in oopses due to unusual socket connection termination paths, exposing these issues. Signed-off-by: Michal Ostrowski Reviewed-by: Cyril Gorcunov Reported-by: Denys Fedoryschenko Tested-by: Denys Fedoryschenko --- drivers/net/pppoe.c | 129 +++++++++++++++++++++++--------------------- 1 file changed, 68 insertions(+), 61 deletions(-) diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 7cbf6f9b51d..2559991eea6 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -111,9 +111,6 @@ struct pppoe_net { rwlock_t hash_lock; }; -/* to eliminate a race btw pppoe_flush_dev and pppoe_release */ -static DEFINE_SPINLOCK(flush_lock); - /* * PPPoE could be in the following stages: * 1) Discovery stage (to obtain remote MAC and Session ID) @@ -303,45 +300,48 @@ static void pppoe_flush_dev(struct net_device *dev) write_lock_bh(&pn->hash_lock); for (i = 0; i < PPPOE_HASH_SIZE; i++) { struct pppox_sock *po = pn->hash_table[i]; + struct sock *sk; - while (po != NULL) { - struct sock *sk; - if (po->pppoe_dev != dev) { + while (po) { + while (po && po->pppoe_dev != dev) { po = po->next; - continue; } + + if (!po) + break; + sk = sk_pppox(po); - spin_lock(&flush_lock); - po->pppoe_dev = NULL; - spin_unlock(&flush_lock); - dev_put(dev); /* We always grab the socket lock, followed by the - * hash_lock, in that order. Since we should - * hold the sock lock while doing any unbinding, - * we need to release the lock we're holding. - * Hold a reference to the sock so it doesn't disappear - * as we're jumping between locks. + * hash_lock, in that order. Since we should hold the + * sock lock while doing any unbinding, we need to + * release the lock we're holding. Hold a reference to + * the sock so it doesn't disappear as we're jumping + * between locks. */ sock_hold(sk); - write_unlock_bh(&pn->hash_lock); lock_sock(sk); - if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { + if (po->pppoe_dev == dev + && sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { pppox_unbind_sock(sk); sk->sk_state = PPPOX_ZOMBIE; sk->sk_state_change(sk); + po->pppoe_dev = NULL; + dev_put(dev); } release_sock(sk); sock_put(sk); - /* Restart scan at the beginning of this hash chain. - * While the lock was dropped the chain contents may - * have changed. + /* Restart the process from the start of the current + * hash chain. We dropped locks so the world may have + * change from underneath us. */ + + BUG_ON(pppoe_pernet(dev_net(dev)) == NULL); write_lock_bh(&pn->hash_lock); po = pn->hash_table[i]; } @@ -388,11 +388,16 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb) struct pppox_sock *po = pppox_sk(sk); struct pppox_sock *relay_po; + /* Backlog receive. Semantics of backlog rcv preclude any code from + * executing in lock_sock()/release_sock() bounds; meaning sk->sk_state + * can't change. + */ + if (sk->sk_state & PPPOX_BOUND) { ppp_input(&po->chan, skb); } else if (sk->sk_state & PPPOX_RELAY) { - relay_po = get_item_by_addr(dev_net(po->pppoe_dev), - &po->pppoe_relay); + relay_po = get_item_by_addr(sock_net(sk), + &po->pppoe_relay); if (relay_po == NULL) goto abort_kfree; @@ -447,6 +452,10 @@ static int pppoe_rcv(struct sk_buff *skb, struct net_device *dev, goto drop; pn = pppoe_pernet(dev_net(dev)); + + /* Note that get_item does a sock_hold(), so sk_pppox(po) + * is known to be safe. + */ po = get_item(pn, ph->sid, eth_hdr(skb)->h_source, dev->ifindex); if (!po) goto drop; @@ -561,6 +570,7 @@ static int pppoe_release(struct socket *sock) struct sock *sk = sock->sk; struct pppox_sock *po; struct pppoe_net *pn; + struct net *net = NULL; if (!sk) return 0; @@ -571,44 +581,28 @@ static int pppoe_release(struct socket *sock) return -EBADF; } + po = pppox_sk(sk); + + if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) { + dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; + } + pppox_unbind_sock(sk); /* Signal the death of the socket. */ sk->sk_state = PPPOX_DEAD; - /* - * pppoe_flush_dev could lead to a race with - * this routine so we use flush_lock to eliminate - * such a case (we only need per-net specific data) - */ - spin_lock(&flush_lock); - po = pppox_sk(sk); - if (!po->pppoe_dev) { - spin_unlock(&flush_lock); - goto out; - } - pn = pppoe_pernet(dev_net(po->pppoe_dev)); - spin_unlock(&flush_lock); + net = sock_net(sk); + pn = pppoe_pernet(net); /* * protect "po" from concurrent updates * on pppoe_flush_dev */ - write_lock_bh(&pn->hash_lock); + delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote, + po->pppoe_ifindex); - po = pppox_sk(sk); - if (stage_session(po->pppoe_pa.sid)) - __delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote, - po->pppoe_ifindex); - - if (po->pppoe_dev) { - dev_put(po->pppoe_dev); - po->pppoe_dev = NULL; - } - - write_unlock_bh(&pn->hash_lock); - -out: sock_orphan(sk); sock->sk = NULL; @@ -625,8 +619,9 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, struct sock *sk = sock->sk; struct sockaddr_pppox *sp = (struct sockaddr_pppox *)uservaddr; struct pppox_sock *po = pppox_sk(sk); - struct net_device *dev; + struct net_device *dev = NULL; struct pppoe_net *pn; + struct net *net = NULL; int error; lock_sock(sk); @@ -652,12 +647,14 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, /* Delete the old binding */ if (stage_session(po->pppoe_pa.sid)) { pppox_unbind_sock(sk); + pn = pppoe_pernet(sock_net(sk)); + delete_item(pn, po->pppoe_pa.sid, + po->pppoe_pa.remote, po->pppoe_ifindex); if (po->pppoe_dev) { - pn = pppoe_pernet(dev_net(po->pppoe_dev)); - delete_item(pn, po->pppoe_pa.sid, - po->pppoe_pa.remote, po->pppoe_ifindex); dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; } + memset(sk_pppox(po) + 1, 0, sizeof(struct pppox_sock) - sizeof(struct sock)); sk->sk_state = PPPOX_NONE; @@ -666,16 +663,15 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, /* Re-bind in session stage only */ if (stage_session(sp->sa_addr.pppoe.sid)) { error = -ENODEV; - dev = dev_get_by_name(sock_net(sk), sp->sa_addr.pppoe.dev); + net = sock_net(sk); + dev = dev_get_by_name(net, sp->sa_addr.pppoe.dev); if (!dev) - goto end; + goto err_put; po->pppoe_dev = dev; po->pppoe_ifindex = dev->ifindex; - pn = pppoe_pernet(dev_net(dev)); - write_lock_bh(&pn->hash_lock); + pn = pppoe_pernet(net); if (!(dev->flags & IFF_UP)) { - write_unlock_bh(&pn->hash_lock); goto err_put; } @@ -683,6 +679,7 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, &sp->sa_addr.pppoe, sizeof(struct pppoe_addr)); + write_lock_bh(&pn->hash_lock); error = __set_item(pn, po); write_unlock_bh(&pn->hash_lock); if (error < 0) @@ -696,8 +693,11 @@ static int pppoe_connect(struct socket *sock, struct sockaddr *uservaddr, po->chan.ops = &pppoe_chan_ops; error = ppp_register_net_channel(dev_net(dev), &po->chan); - if (error) + if (error) { + delete_item(pn, po->pppoe_pa.sid, + po->pppoe_pa.remote, po->pppoe_ifindex); goto err_put; + } sk->sk_state = PPPOX_CONNECTED; } @@ -915,6 +915,14 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) struct pppoe_hdr *ph; int data_len = skb->len; + /* The higher-level PPP code (ppp_unregister_channel()) ensures the PPP + * xmit operations conclude prior to an unregistration call. Thus + * sk->sk_state cannot change, so we don't need to do lock_sock(). + * But, we also can't do a lock_sock since that introduces a potential + * deadlock as we'd reverse the lock ordering used when calling + * ppp_unregister_channel(). + */ + if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED)) goto abort; @@ -944,7 +952,6 @@ static int __pppoe_xmit(struct sock *sk, struct sk_buff *skb) po->pppoe_pa.remote, NULL, data_len); dev_queue_xmit(skb); - return 1; abort: -- GitLab From f568a926a353d6816b3704d7367f34371df44ce7 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Mon, 26 Oct 2009 13:49:50 +0000 Subject: [PATCH 0220/1165] sh_eth: Add asm/cacheflush.h Add include asm/cacheflush.h, because declaration of __flush_purge_region moved to asm/cacheflush.h. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: David S. Miller --- drivers/net/sh_eth.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index f49d0800c1d..528b912a4b0 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "sh_eth.h" -- GitLab From 7abb840b496f834a71a8943bb189683da320f047 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 14 Oct 2009 19:32:15 +0000 Subject: [PATCH 0221/1165] powerpc/perf_events: Fix priority of MSR HV vs PR bits The architecture defines that if MSR PR is set we are in problem state irrespective of the HV bit. This fixes perf events to reflect this. Also, on bare metal systems, samples taken in Linux will now be reported as kernel rather than hypervisor. Signed-off-by: Michael Neuling CC: paulus@samba.org Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/perf_event.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/kernel/perf_event.c index bbcbae183e9..87f1663584b 100644 --- a/arch/powerpc/kernel/perf_event.c +++ b/arch/powerpc/kernel/perf_event.c @@ -116,20 +116,23 @@ static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp) static inline u32 perf_get_misc_flags(struct pt_regs *regs) { unsigned long mmcra = regs->dsisr; + unsigned long sihv = MMCRA_SIHV; + unsigned long sipr = MMCRA_SIPR; if (TRAP(regs) != 0xf00) return 0; /* not a PMU interrupt */ if (ppmu->flags & PPMU_ALT_SIPR) { - if (mmcra & POWER6_MMCRA_SIHV) - return PERF_RECORD_MISC_HYPERVISOR; - return (mmcra & POWER6_MMCRA_SIPR) ? - PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL; + sihv = POWER6_MMCRA_SIHV; + sipr = POWER6_MMCRA_SIPR; } - if (mmcra & MMCRA_SIHV) + + /* PR has priority over HV, so order below is important */ + if (mmcra & sipr) + return PERF_RECORD_MISC_USER; + if ((mmcra & sihv) && (freeze_events_kernel != MMCR0_FCHV)) return PERF_RECORD_MISC_HYPERVISOR; - return (mmcra & MMCRA_SIPR) ? PERF_RECORD_MISC_USER : - PERF_RECORD_MISC_KERNEL; + return PERF_RECORD_MISC_KERNEL; } /* -- GitLab From 171fb12570b479723c49ef9f8911e40e516f3394 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 5 Oct 2009 20:28:47 +0000 Subject: [PATCH 0222/1165] powerpc/iseries: Remove compiler version dependent hack The creation of the flattened device tree depended on the compiler putting the constant strings for an object in a section with a particular name. This was changed with recent compilers. Do this explicitly instead. Without this patch, iseries kernels may silently not boot when built with some compilers. Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/iseries/Makefile | 11 +---- arch/powerpc/platforms/iseries/dt.c | 56 +++++++++++-------------- 2 files changed, 25 insertions(+), 42 deletions(-) diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile index cc7161ff166..ce014928d46 100644 --- a/arch/powerpc/platforms/iseries/Makefile +++ b/arch/powerpc/platforms/iseries/Makefile @@ -1,18 +1,9 @@ EXTRA_CFLAGS += -mno-minimal-toc -extra-y += dt.o - obj-y += exception.o -obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \ +obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt.o mf.o lpevents.o \ hvcall.o proc.o htab.o iommu.o misc.o irq.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_VIOPATH) += viopath.o vio.o obj-$(CONFIG_MODULES) += ksyms.o - -quiet_cmd_dt_strings = DT_STR $@ - cmd_dt_strings = $(OBJCOPY) --rename-section .rodata.str1.8=.dt_strings \ - $< $@ - -$(obj)/dt_mod.o: $(obj)/dt.o - $(call if_changed,dt_strings) diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c index c5a87a72057..7f45a51fe79 100644 --- a/arch/powerpc/platforms/iseries/dt.c +++ b/arch/powerpc/platforms/iseries/dt.c @@ -51,11 +51,16 @@ /* * These are created by the linker script at the start and end - * of the section containing all the strings from this file. + * of the section containing all the strings marked with the DS macro. */ extern char __dt_strings_start[]; extern char __dt_strings_end[]; +#define DS(s) ({ \ + static const char __s[] __attribute__((section(".dt_strings"))) = s; \ + __s; \ +}) + struct iseries_flat_dt { struct boot_param_header header; u64 reserve_map[2]; @@ -64,9 +69,8 @@ struct iseries_flat_dt { static void * __initdata dt_data; /* - * Putting these strings here keeps them out of the section - * that we rename to .dt_strings using objcopy and capture - * for the strings blob of the flattened device tree. + * Putting these strings here keeps them out of the .dt_strings section + * that we capture for the strings blob of the flattened device tree. */ static char __initdata device_type_cpu[] = "cpu"; static char __initdata device_type_memory[] = "memory"; @@ -173,7 +177,7 @@ static void __init dt_start_node(struct iseries_flat_dt *dt, const char *name) #define dt_end_node(dt) dt_push_u32(dt, OF_DT_END_NODE) -static void __init dt_prop(struct iseries_flat_dt *dt, const char *name, +static void __init __dt_prop(struct iseries_flat_dt *dt, const char *name, const void *data, int len) { unsigned long offset; @@ -191,44 +195,32 @@ static void __init dt_prop(struct iseries_flat_dt *dt, const char *name, /* The actual data. */ dt_push_bytes(dt, data, len); } +#define dt_prop(dt, name, data, len) __dt_prop((dt), DS(name), (data), (len)) -static void __init dt_prop_str(struct iseries_flat_dt *dt, const char *name, - const char *data) -{ - dt_prop(dt, name, data, strlen(data) + 1); /* + 1 for NULL */ -} +#define dt_prop_str(dt, name, data) \ + dt_prop((dt), name, (data), strlen((data)) + 1); /* + 1 for NULL */ -static void __init dt_prop_u32(struct iseries_flat_dt *dt, const char *name, +static void __init __dt_prop_u32(struct iseries_flat_dt *dt, const char *name, u32 data) { - dt_prop(dt, name, &data, sizeof(u32)); + __dt_prop(dt, name, &data, sizeof(u32)); } +#define dt_prop_u32(dt, name, data) __dt_prop_u32((dt), DS(name), (data)) -static void __init __maybe_unused dt_prop_u64(struct iseries_flat_dt *dt, - const char *name, - u64 data) +static void __init __maybe_unused __dt_prop_u64(struct iseries_flat_dt *dt, + const char *name, u64 data) { - dt_prop(dt, name, &data, sizeof(u64)); + __dt_prop(dt, name, &data, sizeof(u64)); } +#define dt_prop_u64(dt, name, data) __dt_prop_u64((dt), DS(name), (data)) -static void __init dt_prop_u64_list(struct iseries_flat_dt *dt, - const char *name, u64 *data, int n) -{ - dt_prop(dt, name, data, sizeof(u64) * n); -} +#define dt_prop_u64_list(dt, name, data, n) \ + dt_prop((dt), name, (data), sizeof(u64) * (n)) -static void __init dt_prop_u32_list(struct iseries_flat_dt *dt, - const char *name, u32 *data, int n) -{ - dt_prop(dt, name, data, sizeof(u32) * n); -} +#define dt_prop_u32_list(dt, name, data, n) \ + dt_prop((dt), name, (data), sizeof(u32) * (n)) -#ifdef notyet -static void __init dt_prop_empty(struct iseries_flat_dt *dt, const char *name) -{ - dt_prop(dt, name, NULL, 0); -} -#endif +#define dt_prop_empty(dt, name) dt_prop((dt), name, NULL, 0) static void __init dt_cpus(struct iseries_flat_dt *dt) { -- GitLab From 7de80284d60837f13ecb2347ba7bf57470309541 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Fri, 2 Oct 2009 23:25:31 +0000 Subject: [PATCH 0223/1165] powerpc: Fix segment mapping in vdso32 Due to missing segment assignments the .text section was put in the NOTES segment (and marked as NOTE section), and the .got was put in the DYNAMIC segment. Signed-off-by: Andreas Schwab Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vdso32/vdso32.lds.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S index 904ef1360dd..0546bcd49cd 100644 --- a/arch/powerpc/kernel/vdso32/vdso32.lds.S +++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S @@ -25,7 +25,7 @@ SECTIONS . = ALIGN(16); .text : { *(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*) - } + } :text PROVIDE(__etext = .); PROVIDE(_etext = .); PROVIDE(etext = .); @@ -56,7 +56,7 @@ SECTIONS .fixup : { *(.fixup) } .dynamic : { *(.dynamic) } :text :dynamic - .got : { *(.got) } + .got : { *(.got) } :text .plt : { *(.plt) } _end = .; -- GitLab From 348aa3030096e61474a5537fed5bd69e70b755c0 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Sun, 4 Oct 2009 02:35:41 +0000 Subject: [PATCH 0224/1165] powerpc: Align vDSO base address The ABI specifies a 64K alignment, we need to map the vDSO accordingly Signed-off-by: Andreas Schwab Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/vdso.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 94e2df3cae0..137dc22afa4 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -50,6 +50,9 @@ /* Max supported size for symbol names */ #define MAX_SYMNAME 64 +/* The alignment of the vDSO */ +#define VDSO_ALIGNMENT (1 << 16) + extern char vdso32_start, vdso32_end; static void *vdso32_kbase = &vdso32_start; static unsigned int vdso32_pages; @@ -231,15 +234,21 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp) * pick a base address for the vDSO in process space. We try to put it * at vdso_base which is the "natural" base for it, but we might fail * and end up putting it elsewhere. + * Add enough to the size so that the result can be aligned. */ down_write(&mm->mmap_sem); vdso_base = get_unmapped_area(NULL, vdso_base, - vdso_pages << PAGE_SHIFT, 0, 0); + (vdso_pages << PAGE_SHIFT) + + ((VDSO_ALIGNMENT - 1) & PAGE_MASK), + 0, 0); if (IS_ERR_VALUE(vdso_base)) { rc = vdso_base; goto fail_mmapsem; } + /* Add required alignment. */ + vdso_base = ALIGN(vdso_base, VDSO_ALIGNMENT); + /* * Put vDSO base into mm struct. We need to do this before calling * install_special_mapping or the perf counter mmap tracking code -- GitLab From cdd3904dcc56d9d24ef86be897e421d3cc364226 Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Mon, 5 Oct 2009 04:46:05 +0000 Subject: [PATCH 0225/1165] powerpc/booke: Fix xmon single step on PowerPC Book-E Prior to the arch/ppc -> arch/powerpc transition, xmon had support for single stepping on 4xx boards. The functionality was lost when arch/ppc was removed. This patch restores single step support for 44x boards, and Book-E in general. Signed-off-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/xmon/xmon.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index c6f0a71b405..bdbe96c8a7e 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -517,6 +517,15 @@ static int xmon_core(struct pt_regs *regs, int fromipi) in_xmon = 0; #endif +#ifdef CONFIG_BOOKE + if (regs->msr & MSR_DE) { + bp = at_breakpoint(regs->nip); + if (bp != NULL) { + regs->nip = (unsigned long) &bp->instr[0]; + atomic_inc(&bp->ref_count); + } + } +#else if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) { bp = at_breakpoint(regs->nip); if (bp != NULL) { @@ -530,7 +539,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi) } } } - +#endif insert_cpu_bpts(); local_irq_restore(flags); @@ -894,6 +903,14 @@ cmds(struct pt_regs *excp) } } +#ifdef CONFIG_BOOKE +static int do_step(struct pt_regs *regs) +{ + regs->msr |= MSR_DE; + mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM); + return 1; +} +#else /* * Step a single instruction. * Some instructions we emulate, others we execute with MSR_SE set. @@ -924,6 +941,7 @@ static int do_step(struct pt_regs *regs) regs->msr |= MSR_SE; return 1; } +#endif static void bootcmds(void) { -- GitLab From fafbe983d9fe723caa4ee1899663ed4c2d19ed3b Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 16 Oct 2009 07:05:16 +0000 Subject: [PATCH 0226/1165] powerpc: Add a Book-3E 64-bit defconfig This defconfig's purpose at this time is to help catch compile errors between Book-3S and Book-3E support in ppc64. It is based on the ppc64_defconfig with some things disabled that we dont support on Book-3E right now (hugetlbfs, slices, etc.) Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/ppc64e_defconfig | 2199 +++++++++++++++++++++++++ 1 file changed, 2199 insertions(+) create mode 100644 arch/powerpc/configs/ppc64e_defconfig diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig new file mode 100644 index 00000000000..18af4603625 --- /dev/null +++ b/arch/powerpc/configs/ppc64e_defconfig @@ -0,0 +1,2199 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc5 +# Fri Oct 16 11:37:15 2009 +# +CONFIG_PPC64=y + +# +# Processor support +# +# CONFIG_PPC_BOOK3S_64 is not set +CONFIG_PPC_BOOK3E_64=y +CONFIG_PPC_BOOK3E=y +CONFIG_PPC_FPU=y +CONFIG_BOOKE=y +CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_64=y +CONFIG_PPC_BOOK3E_MMU=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y +CONFIG_SMP=y +CONFIG_NR_CPUS=32 +CONFIG_64BIT=y +CONFIG_WORD_SIZE=64 +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_ARCH_HAS_ILOG2_U64=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +# CONFIG_DEFAULT_UIMAGE is not set +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +# CONFIG_PPC_OF_PLATFORM_PCI is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +# CONFIG_TASK_XACCT is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set +# CONFIG_CGROUP_FREEZER is not set +# CONFIG_CGROUP_DEVICE is not set +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +# CONFIG_CGROUP_CPUACCT is not set +# CONFIG_RESOURCE_COUNTERS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +# CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set +CONFIG_BLOCK_COMPAT=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_U3_DART is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set + +# +# CPU Frequency drivers +# +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m +CONFIG_IOMMU_VMERGE=y +CONFIG_IOMMU_HELPER=y +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_CRASH_DUMP is not set +CONFIG_IRQ_ALL_CPUS=y +# CONFIG_NUMA is not set +CONFIG_MAX_ACTIVE_REGIONS=256 +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +# CONFIG_PPC_HAS_HASH_64K is not set +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=13 +# CONFIG_SCHED_SMT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_PPC_INDIRECT_PCI is not set +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_PCI_MSI=y +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +# CONFIG_YENTA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_HOTPLUG_PCI=m +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set +# CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set +CONFIG_PAGE_OFFSET=0xc000000000000000 +CONFIG_KERNEL_START=0xc000000000000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_NET_IPIP=y +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CT_PROTO_DCCP is not set +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +# CONFIG_NF_CT_PROTO_UDPLITE is not set +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +# CONFIG_NF_CONNTRACK_SANE is not set +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_TPROXY=m +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +CONFIG_LLC=y +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +CONFIG_WIRELESS_OLD_REGULATORY=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=65536 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_TIMINGS=y +CONFIG_IDE_ATAPI=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +CONFIG_BLK_DEV_AMD74XX=y +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +CONFIG_SCSI_MULTI_LUN=y +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +CONFIG_SCSI_SRP_ATTRS=y +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +CONFIG_SCSI_SYM53C8XX_MMIO=y +CONFIG_SCSI_IPR=y +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +CONFIG_SCSI_DEBUG=m +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y +CONFIG_SATA_SVW=y +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +CONFIG_MD_RAID10=y +CONFIG_MD_RAID456=y +# CONFIG_MULTICORE_RAID456 is not set +CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_QL is not set +# CONFIG_DM_MULTIPATH_ST is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set +CONFIG_IEEE1394=y +CONFIG_IEEE1394_OHCI1394=y +# CONFIG_IEEE1394_PCILYNX is not set +CONFIG_IEEE1394_SBP2=m +CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y +CONFIG_IEEE1394_ETH1394=m +CONFIG_IEEE1394_RAWIO=y +CONFIG_IEEE1394_VIDEO1394=m +CONFIG_IEEE1394_DV1394=m +# CONFIG_IEEE1394_VERBOSEDEBUG is not set +# CONFIG_I2O is not set +CONFIG_MACINTOSH_DRIVERS=y +# CONFIG_MAC_EMUMOUSEBTN is not set +CONFIG_WINDFARM=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=m +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +CONFIG_SUNGEM=y +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +CONFIG_ACENIC=y +CONFIG_ACENIC_OMIT_TIGON_I=y +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_IGBVF is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_TIGON3=y +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set +CONFIG_IXGB=m +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set +# CONFIG_BE2NET is not set +CONFIG_TR=y +CONFIG_IBMOL=y +# CONFIG_3C359 is not set +# CONFIG_TMS380TR is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_UINPUT is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=256 +# CONFIG_HANGCHECK_TIMER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +CONFIG_I2C_AMD8111=y +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +CONFIG_VGA_ARB=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +CONFIG_FB_MACMODES=y +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +CONFIG_FB_MATROX_I2C=m +CONFIG_FB_MATROX_MAVEN=m +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_IBM_GXT4500=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_HIFIER is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set +CONFIG_SND_PPC=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_USX2Y is not set +# CONFIG_SND_USB_CAIAQ is not set +CONFIG_SND_PCMCIA=y +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_PDAUDIOCF is not set +# CONFIG_SND_SOC is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_EHCI_HCD_PPC_OF is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +CONFIG_USB_APPLEDISPLAY=m +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_INFINIBAND=m +# CONFIG_INFINIBAND_USER_MAD is not set +# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_ADDR_TRANS=y +CONFIG_INFINIBAND_MTHCA=m +CONFIG_INFINIBAND_MTHCA_DEBUG=y +# CONFIG_INFINIBAND_IPATH is not set +# CONFIG_INFINIBAND_AMSO1100 is not set +# CONFIG_MLX4_INFINIBAND is not set +# CONFIG_INFINIBAND_NES is not set +CONFIG_INFINIBAND_IPOIB=m +# CONFIG_INFINIBAND_IPOIB_CM is not set +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set +# CONFIG_INFINIBAND_SRP is not set +CONFIG_INFINIBAND_ISER=m +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +# CONFIG_EDAC_CPC925 is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_DEBUG is not set +CONFIG_FS_XIP=y +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +CONFIG_REISERFS_FS=y +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +CONFIG_REISERFS_FS_XATTR=y +CONFIG_REISERFS_FS_POSIX_ACL=y +CONFIG_REISERFS_FS_SECURITY=y +CONFIG_JFS_FS=y +CONFIG_JFS_POSIX_ACL=y +CONFIG_JFS_SECURITY=y +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_RPCSEC_GSS_KRB5=y +CONFIG_RPCSEC_GSS_SPKM3=m +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_TRACE_IRQFLAGS=y +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_LATENCYTOP=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +CONFIG_IRQSOFF_TRACER=y +CONFIG_SCHED_TRACER=y +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_PPC_EMULATED_STATS is not set +CONFIG_CODE_PATCHING_SELFTEST=y +CONFIG_FTR_FIXUP_SELFTEST=y +CONFIG_MSI_BITMAP_SELFTEST=y +CONFIG_XMON=y +# CONFIG_XMON_DEFAULT is not set +CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y +CONFIG_IRQSTACKS=y +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=y +CONFIG_ASYNC_CORE=y +CONFIG_ASYNC_MEMCPY=y +CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=m + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set -- GitLab From ce7a35c73a308c62f9f0ca9f0821ebe0dc553008 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 16 Oct 2009 07:05:17 +0000 Subject: [PATCH 0227/1165] powerpc: Fix compile errors found by new ppc64e_defconfig Fix the following 3 issues: arch/powerpc/kernel/process.c: In function 'arch_randomize_brk': arch/powerpc/kernel/process.c:1183: error: 'mmu_highuser_ssize' undeclared (first use in this function) arch/powerpc/kernel/process.c:1183: error: (Each undeclared identifier is reported only once arch/powerpc/kernel/process.c:1183: error: for each function it appears in.) arch/powerpc/kernel/process.c:1183: error: 'MMU_SEGSIZE_1T' undeclared (first use in this function) In file included from arch/powerpc/kernel/setup_64.c:60: arch/powerpc/include/asm/mmu-hash64.h:132: error: redefinition of 'struct mmu_psize_def' arch/powerpc/include/asm/mmu-hash64.h:159: error: expected identifier or '(' before numeric constant arch/powerpc/include/asm/mmu-hash64.h:396: error: conflicting types for 'mm_context_t' arch/powerpc/include/asm/mmu-book3e.h:184: error: previous declaration of 'mm_context_t' was here cc1: warnings being treated as errors arch/powerpc/kernel/pci_64.c: In function 'pcibios_unmap_io_space': arch/powerpc/kernel/pci_64.c:100: error: unused variable 'res' Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci_64.c | 2 ++ arch/powerpc/kernel/process.c | 2 +- arch/powerpc/kernel/setup_64.c | 1 - 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index ba949a2c93a..ccf56ac92de 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -97,7 +97,9 @@ int pcibios_unmap_io_space(struct pci_bus *bus) * to do an appropriate TLB flush here too */ if (bus->self) { +#ifdef CONFIG_PPC_STD_MMU_64 struct resource *res = bus->resource[0]; +#endif pr_debug("IO unmapping for PCI-PCI bridge %s\n", pci_name(bus->self)); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 2ec1eaed19c..c930ac38e59 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1172,7 +1172,7 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) unsigned long base = mm->brk; unsigned long ret; -#ifdef CONFIG_PPC64 +#ifdef CONFIG_PPC_STD_MMU_64 /* * If we are using 1TB segments and we are allowed to randomise * the heap, we can put it above 1TB so it is backed by a 1TB diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 797ea95aae2..04f638d82fb 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -57,7 +57,6 @@ #include #include #include -#include #include #include #include -- GitLab From 0cd9ad73b8d181737005ff4e506b9b6bd043f4dd Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 16 Oct 2009 07:21:35 +0000 Subject: [PATCH 0228/1165] powerpc: Limit hugetlbfs support to PPC64 Book-3S machines Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- fs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/Kconfig b/fs/Kconfig index d4bf8caad8d..f93d0ed4fe0 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -135,7 +135,7 @@ config TMPFS_POSIX_ACL config HUGETLBFS bool "HugeTLB file system support" - depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || \ + depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (SUPERH && MMU) || \ (S390 && 64BIT) || SYS_SUPPORTS_HUGETLBFS || BROKEN help hugetlbfs is a filesystem backing for HugeTLB pages, based on -- GitLab From ed84a07a124bf3b1aab2fd7fdb6e9534838087ac Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 16 Oct 2009 07:21:36 +0000 Subject: [PATCH 0229/1165] powerpc: Limit memory hotplug support to PPC64 Book-3S machines Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/Kconfig b/mm/Kconfig index 57963c6063d..7ca3777bded 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -129,7 +129,7 @@ config MEMORY_HOTPLUG bool "Allow for memory hot-add" depends on SPARSEMEM || X86_64_ACPI_NUMA depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG - depends on (IA64 || X86 || PPC64 || SUPERH || S390) + depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390) comment "Memory hotplug is currently incompatible with Software Suspend" depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390 -- GitLab From 022382a5617685781ca8fa8e6c8eff40ee5cf1cf Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 16 Oct 2009 07:21:37 +0000 Subject: [PATCH 0230/1165] powerpc: Minor cleanup to init/Kconfig We dont need to depend on PPC64 explicitly as all powerpc platforms (32-bit and 64-bit) define PPC now. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- init/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/Kconfig b/init/Kconfig index 09c5c6431f4..f51586406d6 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -297,7 +297,7 @@ config AUDIT config AUDITSYSCALL bool "Enable system-call auditing support" - depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH) + depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH) default y if SECURITY_SELINUX help Enable low-overhead system-call auditing infrastructure that -- GitLab From f8a3ae6c84e60a3f35f573ea592b8fe00dd367ab Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 16 Oct 2009 07:21:38 +0000 Subject: [PATCH 0231/1165] powerpc: Minor cleanup to sound/ppc/Kconfig We can replace PPC32 || PPC64 as a dependancy with just PPC as all powerpc platforms (32-bit and 64-bit) define PPC now. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- sound/ppc/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/ppc/Kconfig b/sound/ppc/Kconfig index bd2338ab2ce..0519c60f5be 100644 --- a/sound/ppc/Kconfig +++ b/sound/ppc/Kconfig @@ -2,7 +2,7 @@ menuconfig SND_PPC bool "PowerPC sound devices" - depends on PPC64 || PPC32 + depends on PPC default y help Support for sound devices specific to PowerPC architectures. -- GitLab From 01deab98e3ad8ff27243a8d5f8dd746c7110ae4f Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 16 Oct 2009 07:21:39 +0000 Subject: [PATCH 0232/1165] powerpc: Minor cleanup to lib/Kconfig.debug We don't need an explicit PPC64 in the DEBUG_PREEMPT dependancies as all PPC platforms now support TRACE_IRQFLAGS_SUPPORT. Signed-off-by: Kumar Gala Signed-off-by: Benjamin Herrenschmidt --- lib/Kconfig.debug | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 30df5865ecb..234ceb10861 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -392,7 +392,7 @@ config DEBUG_KMEMLEAK_TEST config DEBUG_PREEMPT bool "Debug preemptible kernel" - depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64) + depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT default y help If you say Y here then the kernel will use a debug variant of the -- GitLab From 4f917ba3d5ee9c98d60fa357e799942df8412de3 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 26 Oct 2009 19:41:17 +0000 Subject: [PATCH 0233/1165] powerpc/ppc64: Use preempt_schedule_irq instead of preempt_schedule Based on an original patch by Valentine Barshak Use preempt_schedule_irq to prevent infinite irq-entry and eventual stack overflow problems with fast-paced IRQ sources. This kind of problems has been observed on the PASemi Electra IDE controller. We have to make sure we are soft-disabled before calling preempt_schedule_irq and hard disable interrupts after that to avoid unrecoverable exceptions. This patch also moves the "clrrdi r9,r1,THREAD_SHIFT" out of the #ifdef CONFIG_PPC_BOOK3E scope, since r9 is clobbered and has to be restored in both cases. Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_64.S | 41 +++++++++++++++++----------------- 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index f9fd54bfcc8..9763267e38b 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -658,42 +658,43 @@ do_work: cmpdi r0,0 crandc eq,cr1*4+eq,eq bne restore - /* here we are preempting the current task */ -1: -#ifdef CONFIG_TRACE_IRQFLAGS - bl .trace_hardirqs_on - /* Note: we just clobbered r10 which used to contain the previous - * MSR before the hard-disabling done by the caller of do_work. - * We don't have that value anymore, but it doesn't matter as - * we will hard-enable unconditionally, we can just reload the - * current MSR into r10 + + /* Here we are preempting the current task. + * + * Ensure interrupts are soft-disabled. We also properly mark + * the PACA to reflect the fact that they are hard-disabled + * and trace the change */ - mfmsr r10 -#endif /* CONFIG_TRACE_IRQFLAGS */ - li r0,1 + li r0,0 stb r0,PACASOFTIRQEN(r13) stb r0,PACAHARDIRQEN(r13) + TRACE_DISABLE_INTS + + /* Call the scheduler with soft IRQs off */ +1: bl .preempt_schedule_irq + + /* Hard-disable interrupts again (and update PACA) */ #ifdef CONFIG_PPC_BOOK3E - wrteei 1 - bl .preempt_schedule wrteei 0 #else - ori r10,r10,MSR_EE - mtmsrd r10,1 /* reenable interrupts */ - bl .preempt_schedule mfmsr r10 - clrrdi r9,r1,THREAD_SHIFT - rldicl r10,r10,48,1 /* disable interrupts again */ + rldicl r10,r10,48,1 rotldi r10,r10,16 mtmsrd r10,1 #endif /* CONFIG_PPC_BOOK3E */ + li r0,0 + stb r0,PACAHARDIRQEN(r13) + + /* Re-test flags and eventually loop */ + clrrdi r9,r1,THREAD_SHIFT ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_NEED_RESCHED bne 1b b restore user_work: -#endif +#endif /* CONFIG_PREEMPT */ + /* Enable interrupts */ #ifdef CONFIG_PPC_BOOK3E wrteei 1 -- GitLab From 772be899bc022ef2b911c3611b487d417e3269c3 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 20 Oct 2009 12:54:02 +0800 Subject: [PATCH 0234/1165] x86: Make EFI RTC function depend on 32bit again The EFI RTC functions are only available on 32 bit. commit 7bd867df (x86: Move get/set_wallclock to x86_platform_ops) removed the 32bit dependency which leads to boot crashes on 64bit EFI systems. Add the dependency back. Solves: http://bugzilla.kernel.org/show_bug.cgi?id=14466 Tested-by: Matthew Garrett Signed-off-by: Feng Tang LKML-Reference: <20091020125402.028d66d5@feng-desktop> Signed-off-by: Thomas Gleixner --- arch/x86/kernel/efi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index ad5bd988fb7..cdcfb122f25 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -454,8 +454,10 @@ void __init efi_init(void) if (add_efi_memmap) do_add_efi_memmap(); +#ifdef CONFIG_X86_32 x86_platform.get_wallclock = efi_get_time; x86_platform.set_wallclock = efi_set_rtc_mmss; +#endif /* Setup for EFI runtime service */ reboot_type = BOOT_EFI; -- GitLab From 55a1098476619d5d8f4cdae7240ea759274dead7 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 27 Oct 2009 09:39:18 -0700 Subject: [PATCH 0235/1165] Revert "PCI: get larger bridge ranges when space is available" This reverts commit 308cf8e13f42f476dfd6552aeff58fdc0788e566. This patch had trouble with transparent bridges, among other things. A more readable and correct version should land in 2.6.33. Signed-off-by: Jesse Barnes --- drivers/pci/setup-bus.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 0959430534b..cb1a027eb55 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -299,17 +299,8 @@ static struct resource *find_free_bus_resource(struct pci_bus *bus, unsigned lon r = bus->resource[i]; if (r == &ioport_resource || r == &iomem_resource) continue; - if (r && (r->flags & type_mask) == type) { - if (!r->parent) - return r; - /* - * if there is no child under that, we should release - * and use it. don't need to reset it, pbus_size_* will - * set it again - */ - if (!r->child && !release_resource(r)) - return r; - } + if (r && (r->flags & type_mask) == type && !r->parent) + return r; } return NULL; } -- GitLab From 17616310836ad2cc45a64576ef0e1520b0dcc81b Mon Sep 17 00:00:00 2001 From: Benoit PAPILLAULT Date: Thu, 15 Oct 2009 21:17:09 +0200 Subject: [PATCH 0236/1165] rt2x00: Fix crypto in TX frame for rt2800usb Signed-off-by: Benoit PAPILLAULT Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index a084077a1c6..9fe770f7d7b 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1994,7 +1994,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size); rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID, test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? - (skbdesc->entry->entry_idx + 1) : 0xff); + txdesc->key_idx : 0xff); rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, skb->len - txdesc->l2pad); rt2x00_set_field32(&word, TXWI_W1_PACKETID, -- GitLab From d50bae33d1358b909ade05ae121d83d3a60ab63f Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 16 Oct 2009 10:18:09 -0500 Subject: [PATCH 0237/1165] b43: Fix Bugzilla #14181 and the bug from the previous 'fix' "b43: Fix PPC crash in rfkill polling on unload" fixed the bug reported in Bugzilla No. 14181; however, it introduced a new bug. Whenever the radio switch was turned off, it was necessary to unload and reload the driver for it to recognize the switch again. This patch fixes both the original bug in #14181 and the bug introduced by the previous patch. It must be stated, however, that if there is a BCM4306/3 with an rfkill switch (not yet proven), then the driver will need an unload/reload cycle to turn the device back on. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 1 - drivers/net/wireless/b43/rfkill.c | 3 ++- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index df6b26a0c05..86f35827f00 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4501,7 +4501,6 @@ static void b43_op_stop(struct ieee80211_hw *hw) cancel_work_sync(&(wl->beacon_update_trigger)); - wiphy_rfkill_stop_polling(hw->wiphy); mutex_lock(&wl->mutex); if (b43_status(dev) >= B43_STAT_STARTED) { dev = b43_wireless_core_stop(dev); diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c index 7a3218c5ba7..ffdce6f3c90 100644 --- a/drivers/net/wireless/b43/rfkill.c +++ b/drivers/net/wireless/b43/rfkill.c @@ -33,7 +33,8 @@ bool b43_is_hw_radio_enabled(struct b43_wldev *dev) & B43_MMIO_RADIO_HWENABLED_HI_MASK)) return 1; } else { - if (b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO) + if (b43_status(dev) >= B43_STAT_STARTED && + b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO) & B43_MMIO_RADIO_HWENABLED_LO_MASK) return 1; } -- GitLab From e6693eab351fc19809e76167cd18a6f028661e8a Mon Sep 17 00:00:00 2001 From: Miguel Boton Date: Fri, 9 Oct 2009 16:13:53 +0200 Subject: [PATCH 0238/1165] b43: add 'struct b43_wl' missing declaration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 'struct b43_wl' declaration is missing at 'leds.h'. It should be declared to avoid getting some GCC warnings at 'b43_leds_unregister'. Signed-off-by: Miguel Botón Signed-off-by: John W. Linville --- drivers/net/wireless/b43/leds.h | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/b43/leds.h b/drivers/net/wireless/b43/leds.h index 4c56187810f..32b66d53cda 100644 --- a/drivers/net/wireless/b43/leds.h +++ b/drivers/net/wireless/b43/leds.h @@ -1,6 +1,7 @@ #ifndef B43_LEDS_H_ #define B43_LEDS_H_ +struct b43_wl; struct b43_wldev; #ifdef CONFIG_B43_LEDS -- GitLab From d419b9f0fa69e79ccba3e5e79a58a52ae0c2ed6a Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 19 Oct 2009 14:55:37 -0700 Subject: [PATCH 0239/1165] mac80211: fix ibss joining Recent commit "mac80211: fix logic error ibss merge bssid check" fixed joining of ibss cell when static bssid is provided. In this case ifibss->bssid is set before the cell is joined and comparing that address to a bss should thus always succeed. Unfortunately this change broke the other case of joining a ibss cell without providing a static bssid where the value of ifibss->bssid is not set before the cell is joined. Since ifibss->bssid may be set before or after joining the cell we do not learn anything by comparing it to a known bss. Remove this check. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 6eaf6982343..ca8ecce31d3 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -538,13 +538,12 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata) WLAN_CAPABILITY_PRIVACY, capability); + if (bss) { #ifdef CONFIG_MAC80211_IBSS_DEBUG - if (bss) printk(KERN_DEBUG " sta_find_ibss: selected %pM current " "%pM\n", bss->cbss.bssid, ifibss->bssid); #endif /* CONFIG_MAC80211_IBSS_DEBUG */ - if (bss && !memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN)) { printk(KERN_DEBUG "%s: Selected IBSS BSSID %pM" " based on configured SSID\n", sdata->dev->name, bss->cbss.bssid); @@ -552,8 +551,7 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata) ieee80211_sta_join_ibss(sdata, bss); ieee80211_rx_bss_put(local, bss); return; - } else if (bss) - ieee80211_rx_bss_put(local, bss); + } #ifdef CONFIG_MAC80211_IBSS_DEBUG printk(KERN_DEBUG " did not try to join ibss\n"); -- GitLab From 2ef6e4440926668cfa9eac4b79e63528ebcbe0c1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 20 Oct 2009 15:08:12 +0900 Subject: [PATCH 0240/1165] mac80211: keep auth state when assoc fails When association fails, we should stay authenticated, which in mac80211 is represented by the existence of the mlme work struct, so we cannot free that, instead we need to just set it to idle. (Brought to you by the hacking session at Kernel Summit 2009 in Tokyo, Japan. -- JWL) Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 8d26e9bf896..dc5049d58c5 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1457,8 +1457,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, if (status_code != WLAN_STATUS_SUCCESS) { printk(KERN_DEBUG "%s: AP denied association (code=%d)\n", sdata->dev->name, status_code); - list_del(&wk->list); - kfree(wk); + wk->state = IEEE80211_MGD_STATE_IDLE; return RX_MGMT_CFG80211_ASSOC; } -- GitLab From 7d930bc33653d5592dc386a76a38f39c2e962344 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 20 Oct 2009 15:08:53 +0900 Subject: [PATCH 0241/1165] cfg80211: sme: deauthenticate on assoc failure When the in-kernel SME gets an association failure from the AP we don't deauthenticate, and thus get into a very confused state which will lead to warnings later on. Fix this by actually deauthenticating when the AP indicates an association failure. (Brought to you by the hacking session at Kernel Summit 2009 in Tokyo, Japan. -- JWL) Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/core.h | 1 + net/wireless/mlme.c | 9 +++++++++ net/wireless/sme.c | 21 +++++++++++++++++++-- 3 files changed, 29 insertions(+), 2 deletions(-) diff --git a/net/wireless/core.h b/net/wireless/core.h index 2a33d8bc886..68b321997d4 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -358,6 +358,7 @@ int cfg80211_mgd_wext_connect(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev); void cfg80211_conn_work(struct work_struct *work); +void cfg80211_sme_failed_assoc(struct wireless_dev *wdev); bool cfg80211_sme_failed_reassoc(struct wireless_dev *wdev); /* internal helpers */ diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 79d2eec54ce..0a6b7a0eca6 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -62,6 +62,7 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len) u8 *ie = mgmt->u.assoc_resp.variable; int i, ieoffs = offsetof(struct ieee80211_mgmt, u.assoc_resp.variable); struct cfg80211_internal_bss *bss = NULL; + bool need_connect_result = true; wdev_lock(wdev); @@ -94,6 +95,14 @@ void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len) } WARN_ON(!bss); + } else if (wdev->conn) { + cfg80211_sme_failed_assoc(wdev); + need_connect_result = false; + /* + * do not call connect_result() now because the + * sme will schedule work that does it later. + */ + goto out; } if (!wdev->conn && wdev->sme_state == CFG80211_SME_IDLE) { diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 93c3ed32920..ece378d531e 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -26,6 +26,7 @@ struct cfg80211_conn { CFG80211_CONN_AUTHENTICATING, CFG80211_CONN_ASSOCIATE_NEXT, CFG80211_CONN_ASSOCIATING, + CFG80211_CONN_DEAUTH_ASSOC_FAIL, } state; u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN]; u8 *ie; @@ -148,6 +149,12 @@ static int cfg80211_conn_do_work(struct wireless_dev *wdev) NULL, 0, WLAN_REASON_DEAUTH_LEAVING); return err; + case CFG80211_CONN_DEAUTH_ASSOC_FAIL: + __cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid, + NULL, 0, + WLAN_REASON_DEAUTH_LEAVING); + /* return an error so that we call __cfg80211_connect_result() */ + return -EINVAL; default: return 0; } @@ -158,6 +165,7 @@ void cfg80211_conn_work(struct work_struct *work) struct cfg80211_registered_device *rdev = container_of(work, struct cfg80211_registered_device, conn_work); struct wireless_dev *wdev; + u8 bssid[ETH_ALEN]; rtnl_lock(); cfg80211_lock_rdev(rdev); @@ -173,10 +181,10 @@ void cfg80211_conn_work(struct work_struct *work) wdev_unlock(wdev); continue; } + memcpy(bssid, wdev->conn->params.bssid, ETH_ALEN); if (cfg80211_conn_do_work(wdev)) __cfg80211_connect_result( - wdev->netdev, - wdev->conn->params.bssid, + wdev->netdev, bssid, NULL, 0, NULL, 0, WLAN_STATUS_UNSPECIFIED_FAILURE, false, NULL); @@ -337,6 +345,15 @@ bool cfg80211_sme_failed_reassoc(struct wireless_dev *wdev) return true; } +void cfg80211_sme_failed_assoc(struct wireless_dev *wdev) +{ + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + + wdev->conn->state = CFG80211_CONN_DEAUTH_ASSOC_FAIL; + schedule_work(&rdev->conn_work); +} + void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, const u8 *req_ie, size_t req_ie_len, const u8 *resp_ie, size_t resp_ie_len, -- GitLab From f99288d1761fb3b0decb0fdc4d746406addd29d5 Mon Sep 17 00:00:00 2001 From: Andrey Yurovsky Date: Tue, 20 Oct 2009 12:17:34 -0700 Subject: [PATCH 0242/1165] mac80211: trivial: fix spelling in mesh_hwmp Fix a typo in the description of hwmp_route_info_get(), no function changes. Signed-off-by: Andrey Yurovsky Signed-off-by: John W. Linville --- net/mac80211/mesh_hwmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index e12a786e26b..29b82e98eff 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -259,7 +259,7 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, * @hwmp_ie: hwmp information element (PREP or PREQ) * * This function updates the path routing information to the originator and the - * transmitter of a HWMP PREQ or PREP fram. + * transmitter of a HWMP PREQ or PREP frame. * * Returns: metric to frame originator or 0 if the frame should not be further * processed -- GitLab From d18ba452d7de12a22bd01a0a00e5b836eb0f4198 Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Thu, 22 Oct 2009 15:30:44 +0200 Subject: [PATCH 0243/1165] libertas spi: fix sparse errors This fixes the following sparse warnings: $ make modules SUBDIRS=drivers/net/wireless/libertas C=1 CF=-D__CHECK_ENDIAN__ make: Entering directory `/usr/src/linux-wl' CHECK drivers/net/wireless/libertas/if_spi.c drivers/net/wireless/libertas/if_spi.c:137:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:137:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:137:16: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:191:16: warning: incorrect type in initializer (different base types) drivers/net/wireless/libertas/if_spi.c:191:16: expected unsigned short [unsigned] [usertype] reg_out drivers/net/wireless/libertas/if_spi.c:191:16: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:256:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:256:24: expected restricted __le32 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:256:24: got unsigned int * drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short * drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short * drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short * drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short * drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short * drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:171:7: warning: incorrect type in assignment (different base types) drivers/net/wireless/libertas/if_spi.c:171:7: expected unsigned short [unsigned] [usertype] buff drivers/net/wireless/libertas/if_spi.c:171:7: got restricted __le16 [usertype] drivers/net/wireless/libertas/if_spi.c:243:24: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/libertas/if_spi.c:243:24: expected restricted __le16 const [usertype] *p drivers/net/wireless/libertas/if_spi.c:243:24: got unsigned short * Signed-off-by: Holger Schurig Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_spi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index cb8be8d7abc..5b3672c4d0c 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -134,7 +134,7 @@ static void spu_transaction_finish(struct if_spi_card *card) static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len) { int err = 0; - u16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK); + __le16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK); struct spi_message m; struct spi_transfer reg_trans; struct spi_transfer data_trans; @@ -166,7 +166,7 @@ static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len) static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val) { - u16 buff; + __le16 buff; buff = cpu_to_le16(val); return spu_write(card, reg, (u8 *)&buff, sizeof(u16)); @@ -188,7 +188,7 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) { unsigned int delay; int err = 0; - u16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK); + __le16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK); struct spi_message m; struct spi_transfer reg_trans; struct spi_transfer dummy_trans; @@ -235,7 +235,7 @@ static int spu_read(struct if_spi_card *card, u16 reg, u8 *buf, int len) /* Read 16 bits from an SPI register */ static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val) { - u16 buf; + __le16 buf; int ret; ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); @@ -248,7 +248,7 @@ static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val) * The low 16 bits are read first. */ static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val) { - u32 buf; + __le32 buf; int err; err = spu_read(card, reg, (u8 *)&buf, sizeof(buf)); -- GitLab From 9b1ce526eb917c8b5c8497c327768130ee683392 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B6rn=20Smedman?= Date: Sat, 24 Oct 2009 20:55:09 +0200 Subject: [PATCH 0244/1165] mac80211: fix for incorrect sequence number on hostapd injected frames MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When hostapd injects a frame, e.g. an authentication or association response, mac80211 looks for a suitable access point virtual interface to associate the frame with based on its source address. This makes it possible e.g. to correctly assign sequence numbers to the frames. A small typo in the ethernet address comparison statement caused a failure to find a suitable ap interface. Sequence numbers on such frames where therefore left unassigned causing some clients (especially windows-based 11b/g clients) to reject them and fail to authenticate or associate with the access point. This patch fixes the typo in the address comparison statement. Signed-off-by: Björn Smedman Reviewed-by: Johannes Berg Cc: stable@kernel.org Signed-off-by: John W. Linville --- net/mac80211/tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index db4bda681ec..eaa4118de98 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1445,7 +1445,7 @@ static void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, if (tmp_sdata->vif.type != NL80211_IFTYPE_AP) continue; if (compare_ether_addr(tmp_sdata->dev->dev_addr, - hdr->addr2)) { + hdr->addr2) == 0) { dev_hold(tmp_sdata->dev); dev_put(sdata->dev); sdata = tmp_sdata; -- GitLab From 30bd5726730e374a81c9e677d1a5ba2cf8f94a7c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 26 Oct 2009 15:28:11 +0100 Subject: [PATCH 0245/1165] airo: Reorder tests, check bounds before element Test whether index is within bounds before reading the element Signed-off-by: Roel Kluin Signed-off-by: John W. Linville --- drivers/net/wireless/airo.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 7116a1aa20c..abf896a7390 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -4790,9 +4790,8 @@ static int proc_stats_rid_open( struct inode *inode, static int get_dec_u16( char *buffer, int *start, int limit ) { u16 value; int valid = 0; - for( value = 0; buffer[*start] >= '0' && - buffer[*start] <= '9' && - *start < limit; (*start)++ ) { + for (value = 0; *start < limit && buffer[*start] >= '0' && + buffer[*start] <= '9'; (*start)++) { valid = 1; value *= 10; value += buffer[*start] - '0'; -- GitLab From 83fc9c8938cdb55f06aa6e14f4747136b747be74 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 26 Oct 2009 20:14:33 +0100 Subject: [PATCH 0246/1165] MAINTAINERS: rt2x00 list is moderated Cc: users@rt2x00.serialmonkey.com Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: John W. Linville --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 70bc7ded944..cdbbaf59a43 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4280,7 +4280,7 @@ F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project L: linux-wireless@vger.kernel.org -L: users@rt2x00.serialmonkey.com +L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git -- GitLab From 973df35ed9ff7806403e793a2ad7e9bd4c2fd2a9 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 27 Oct 2009 16:54:19 -0700 Subject: [PATCH 0247/1165] xen: set up mmu_ops before trying to set any ptes xen_setup_stackprotector() ends up trying to set page protections, so we need to have vm_mmu_ops set up before trying to do so. Failing to do so causes an early boot crash. [ Impact: Fix early crash under Xen. ] Signed-off-by: Jeremy Fitzhardinge --- arch/x86/xen/enlighten.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 3439616d69f..23a4d80fb39 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1075,6 +1075,8 @@ asmlinkage void __init xen_start_kernel(void) * Set up some pagetable state before starting to set any ptes. */ + xen_init_mmu_ops(); + /* Prevent unwanted bits from being set in PTEs. */ __supported_pte_mask &= ~_PAGE_GLOBAL; if (!xen_initial_domain()) @@ -1099,7 +1101,6 @@ asmlinkage void __init xen_start_kernel(void) */ xen_setup_stackprotector(); - xen_init_mmu_ops(); xen_init_irq_ops(); xen_init_cpuid_mask(); -- GitLab From 93239ea158368016a017200cb133e1057fb3ef89 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 28 Oct 2009 11:09:58 +1000 Subject: [PATCH 0248/1165] drm/radeon/kms: ignore vga arbiter return. Since we register all radeon devices, and the arbiter only cares about VGA class ones, we will fail to startup on display controller class devices. We don't gain anything by using the return value here. this helps kms on sparc64 get started. Reported-by: David S. Miller Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index 3d667031de6..df988142e6b 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -582,10 +582,9 @@ int radeon_device_init(struct radeon_device *rdev, DRM_INFO("register mmio size: %u\n", (unsigned)rdev->rmmio_size); /* if we have > 1 VGA cards, then disable the radeon VGA resources */ - r = vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode); - if (r) { - return -EINVAL; - } + /* this will fail for cards that aren't VGA class devices, just + * ignore it */ + vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode); r = radeon_init(rdev); if (r) -- GitLab From fcb45611448098a36b893bda71e72bd39730a3dd Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 14 Oct 2009 09:11:25 +0800 Subject: [PATCH 0249/1165] drm: Add the basic check for the detailed timing in EDID Sometimes we will get the incorrect display modeline when parsing the detailed timing in EDID. For example: >hsync/vsync width is zero >sync is beyond the blank. So add the basic check for the detailed timing in EDID to avoid the incorrect display modeline. Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 3c0d2b3aed7..cea665d86dd 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -626,6 +626,12 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, return NULL; } + /* it is incorrect if hsync/vsync width is zero */ + if (!hsync_pulse_width || !vsync_pulse_width) { + DRM_DEBUG_KMS("Incorrect Detailed timing. " + "Wrong Hsync/Vsync pulse width\n"); + return NULL; + } mode = drm_mode_create(dev); if (!mode) return NULL; @@ -647,6 +653,15 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->vsync_end = mode->vsync_start + vsync_pulse_width; mode->vtotal = mode->vdisplay + vblank; + /* perform the basic check for the detailed timing */ + if (mode->hsync_end > mode->htotal || + mode->vsync_end > mode->vtotal) { + drm_mode_destroy(dev, mode); + DRM_DEBUG_KMS("Incorrect detailed timing. " + "Sync is beyond the blank.\n"); + return NULL; + } + drm_mode_set_name(mode); if (pt->misc & DRM_EDID_PT_INTERLACED) -- GitLab From 77de0846aed9d7a1b0ea65090620900d66fb5cfb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 23 Oct 2009 18:49:03 +1000 Subject: [PATCH 0250/1165] drm/kms: fix kms/fbdev colormap support properly. This sets the fbcon to use TRUECOLOR by default, it then only modifies the pseudo palette for fbcon, and only touches the real palette when in 8-bit pseudo color mode. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 42 +++++++++++++++++++++++---------- 1 file changed, 29 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 23dc9c115fd..9c924614c41 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -454,22 +454,39 @@ out_free: } EXPORT_SYMBOL(drm_fb_helper_init_crtc_count); -static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, +static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, u16 regno, struct fb_info *info) { struct drm_fb_helper *fb_helper = info->par; struct drm_framebuffer *fb = fb_helper->fb; int pindex; + if (info->fix.visual == FB_VISUAL_TRUECOLOR) { + u32 *palette; + u32 value; + /* place color in psuedopalette */ + if (regno > 16) + return -EINVAL; + palette = (u32 *)info->pseudo_palette; + red >>= (16 - info->var.red.length); + green >>= (16 - info->var.green.length); + blue >>= (16 - info->var.blue.length); + value = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + palette[regno] = value; + return 0; + } + pindex = regno; if (fb->bits_per_pixel == 16) { pindex = regno << 3; if (fb->depth == 16 && regno > 63) - return; + return -EINVAL; if (fb->depth == 15 && regno > 31) - return; + return -EINVAL; if (fb->depth == 16) { u16 r, g, b; @@ -493,13 +510,7 @@ static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, if (fb->depth != 16) fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex); - - if (regno < 16 && info->fix.visual == FB_VISUAL_DIRECTCOLOR) { - ((u32 *) fb->pseudo_palette)[regno] = - (regno << info->var.red.offset) | - (regno << info->var.green.offset) | - (regno << info->var.blue.offset); - } + return 0; } int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) @@ -536,7 +547,9 @@ int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) if (transp) htransp = *transp++; - setcolreg(crtc, hred, hgreen, hblue, start++, info); + rc = setcolreg(crtc, hred, hgreen, hblue, start++, info); + if (rc) + return rc; } crtc_funcs->load_lut(crtc); } @@ -555,6 +568,7 @@ int drm_fb_helper_setcolreg(unsigned regno, struct drm_device *dev = fb_helper->dev; struct drm_crtc *crtc; int i; + int ret; if (regno > 255) return 1; @@ -568,8 +582,10 @@ int drm_fb_helper_setcolreg(unsigned regno, if (i == fb_helper->crtc_count) continue; + ret = setcolreg(crtc, red, green, blue, regno, info); + if (ret) + return ret; - setcolreg(crtc, red, green, blue, regno, info); crtc_funcs->load_lut(crtc); } return 0; @@ -928,7 +944,7 @@ void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch, { info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR : - FB_VISUAL_DIRECTCOLOR; + FB_VISUAL_TRUECOLOR; info->fix.type_aux = 0; info->fix.xpanstep = 1; /* doing it in hw */ info->fix.ypanstep = 1; /* doing it in hw */ -- GitLab From 8f552a66a40bcc6e903e91310f42fe140e0342c4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 27 Oct 2009 11:16:09 -0400 Subject: [PATCH 0251/1165] drm/radeon/kms/atom: loosen pll min output limits Limiting the pll output range is a good thing generally as it limits the number of possible pll combinations for a given frequency presumably to the ones that work best on each card. That's why the limits are in the bios tables. However, certain duallink DVI monitors seem to like pll combinations that would be limited by this at least on pre-DCE 3.0 r6xx hardware. This might need to be adjusted per family or per clock range in the future. See fdo bug 24727. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 18729259c2f..1c9a9c46176 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -655,6 +655,16 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) p1pll->pll_out_min = 64800; else p1pll->pll_out_min = 20000; + } else if (p1pll->pll_out_min > 64800) { + /* Limiting the pll output range is a good thing generally as + * it limits the number of possible pll combinations for a given + * frequency presumably to the ones that work best on each card. + * However, certain duallink DVI monitors seem to like + * pll combinations that would be limited by this at least on + * pre-DCE 3.0 r6xx hardware. This might need to be adjusted per + * family. + */ + p1pll->pll_out_min = 64800; } p1pll->pll_in_min = -- GitLab From d56ef9c8fd34ed29ffae27598a864b4a9a82521b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 27 Oct 2009 12:11:09 -0400 Subject: [PATCH 0252/1165] drm/radeon/kms/atom: Fix DVO support DVO in 12 bit mode (which seems to be the most common config) requires 2x ppll. Fixes fdo bug 21857. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index e5a3c301b7a..8516e1b2329 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -483,8 +483,14 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&adjust_pll_args); adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10; - } else - adjusted_clock = mode->clock; + } else { + /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */ + if (ASIC_IS_AVIVO(rdev) && + (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)) + adjusted_clock = mode->clock * 2; + else + adjusted_clock = mode->clock; + } if (radeon_crtc->crtc_id == 0) pll = &rdev->clock.p1pll; -- GitLab From 61c4b24b3e3bb83bfe29f24fe566281b4f722237 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Tue, 27 Oct 2009 15:08:01 -0400 Subject: [PATCH 0253/1165] drm/radeon/kms/atom: Make card_info per device Make the struct card_info, which is a per struct radeon_device dataset, a struct member of the radeon device instead of a static per kernel module value. This should avoid potential problems with two radeon cards installed in one system. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 29 +++++++++++++++----------- drivers/gpu/drm/radeon/radeon_mode.h | 1 + 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index d1cdda9b558..88c19070247 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -443,20 +443,24 @@ static uint32_t cail_reg_read(struct card_info *info, uint32_t reg) return r; } -static struct card_info atom_card_info = { - .dev = NULL, - .reg_read = cail_reg_read, - .reg_write = cail_reg_write, - .mc_read = cail_mc_read, - .mc_write = cail_mc_write, - .pll_read = cail_pll_read, - .pll_write = cail_pll_write, -}; - int radeon_atombios_init(struct radeon_device *rdev) { - atom_card_info.dev = rdev->ddev; - rdev->mode_info.atom_context = atom_parse(&atom_card_info, rdev->bios); + struct card_info *atom_card_info = + kzalloc(sizeof(struct card_info), GFP_KERNEL); + + if (!atom_card_info) + return -ENOMEM; + + rdev->mode_info.atom_card_info = atom_card_info; + atom_card_info->dev = rdev->ddev; + atom_card_info->reg_read = cail_reg_read; + atom_card_info->reg_write = cail_reg_write; + atom_card_info->mc_read = cail_mc_read; + atom_card_info->mc_write = cail_mc_write; + atom_card_info->pll_read = cail_pll_read; + atom_card_info->pll_write = cail_pll_write; + + rdev->mode_info.atom_context = atom_parse(atom_card_info, rdev->bios); radeon_atom_initialize_bios_scratch_regs(rdev->ddev); return 0; } @@ -464,6 +468,7 @@ int radeon_atombios_init(struct radeon_device *rdev) void radeon_atombios_fini(struct radeon_device *rdev) { kfree(rdev->mode_info.atom_context); + kfree(rdev->mode_info.atom_card_info); } int radeon_combios_init(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 2ea5707c018..ccb783868ad 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -172,6 +172,7 @@ enum radeon_connector_table { struct radeon_mode_info { struct atom_context *atom_context; + struct card_info *atom_card_info; enum radeon_connector_table connector_table; bool mode_config_initialized; struct radeon_crtc *crtcs[2]; -- GitLab From a2d49ae7df5b96fba3c63710df61412587fc6a24 Mon Sep 17 00:00:00 2001 From: James Simmons Date: Tue, 27 Oct 2009 21:09:24 +0000 Subject: [PATCH 0254/1165] drm/kms: typo fix I believe this is a typo. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 9c924614c41..dc8e374a0b5 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -707,7 +707,7 @@ int drm_fb_helper_set_par(struct fb_info *info) if (crtc->fb == fb_helper->crtc_info[i].mode_set.fb) { mutex_lock(&dev->mode_config.mutex); - ret = crtc->funcs->set_config(&fb_helper->crtc_info->mode_set); + ret = crtc->funcs->set_config(&fb_helper->crtc_info[i].mode_set); mutex_unlock(&dev->mode_config.mutex); if (ret) return ret; -- GitLab From d11aa88b33b071d55181a7a482b9e7494888c10e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 Oct 2009 00:51:20 -0400 Subject: [PATCH 0255/1165] drm/radeon/kms/atom: fix potential oops in spread spectrum code Make sure we have an LVDS encoder before casting enc_priv. [airlied: also fix two missing cpu_to_le16 casts we noticed on irc] Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 8516e1b2329..c15287a590f 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -368,14 +368,17 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { if (encoder->crtc == crtc) { radeon_encoder = to_radeon_encoder(encoder); - dig = radeon_encoder->enc_priv; /* only enable spread spectrum on LVDS */ - if (dig && dig->ss) { - percentage = dig->ss->percentage; - type = dig->ss->type; - step = dig->ss->step; - delay = dig->ss->delay; - range = dig->ss->range; + if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { + dig = radeon_encoder->enc_priv; + if (dig && dig->ss) { + percentage = dig->ss->percentage; + type = dig->ss->type; + step = dig->ss->step; + delay = dig->ss->delay; + range = dig->ss->range; + } else if (enable) + return; } else if (enable) return; break; @@ -387,7 +390,7 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) if (ASIC_IS_AVIVO(rdev)) { memset(&args, 0, sizeof(args)); - args.usSpreadSpectrumPercentage = percentage; + args.usSpreadSpectrumPercentage = cpu_to_le16(percentage); args.ucSpreadSpectrumType = type; args.ucSpreadSpectrumStep = step; args.ucSpreadSpectrumDelay = delay; @@ -397,7 +400,7 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } else { memset(&legacy_args, 0, sizeof(legacy_args)); - legacy_args.usSpreadSpectrumPercentage = percentage; + legacy_args.usSpreadSpectrumPercentage = cpu_to_le16(percentage); legacy_args.ucSpreadSpectrumType = type; legacy_args.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2; legacy_args.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4; -- GitLab From fc7f7119d2ed97fff1aaddad6bf7d61ed446cf37 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 Oct 2009 01:46:54 -0400 Subject: [PATCH 0256/1165] drm/radeon/kms: add quirk for hp dc5750 Doesn't have a tv-out port Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index fcb9371bf05..a36ede002ee 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1587,6 +1587,12 @@ static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) dev->pdev->subsystem_device == 0x009f) return false; + /* HP dc5750 has non-existent TV port */ + if (dev->pdev->device == 0x5974 && + dev->pdev->subsystem_vendor == 0x103c && + dev->pdev->subsystem_device == 0x280a) + return false; + return true; } -- GitLab From ea1495a6274c9542a168337536f8ce74d1173f23 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 27 Oct 2009 11:57:53 +1100 Subject: [PATCH 0257/1165] drm/radeon/kms: fix rc410 suspend/resume. This fixes suspend/resume on my rc410 motherboard, it restores the memory controller setup before posting the GPU, since it seems to need the MC_FB_LOCATION setup correctly. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rs400.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index a769c296f6a..ca037160a58 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -418,6 +418,8 @@ int rs400_resume(struct radeon_device *rdev) rs400_gart_disable(rdev); /* Resume clock before doing reset */ r300_clock_startup(rdev); + /* setup MC before calling post tables */ + rs400_mc_program(rdev); /* Reset gpu before posting otherwise ATOM will enter infinite loop */ if (radeon_gpu_reset(rdev)) { dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n", -- GitLab From d0549382da9997834ce65e489d9dbdc4b4693a2b Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 28 Oct 2009 03:41:59 -0700 Subject: [PATCH 0258/1165] cnic: Fix L2CTX_STATUSB_NUM offset in context memory. The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match the recent firmware update: commit 078b0735881c7969aaf21469f3577831cddd9f8c bnx2: Update firmware to 5.0.0.j3. Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when iSCSI is enabled. Signed-off-by: Michael Chan Signed-off-by: Benjamin Li Signed-off-by: David S. Miller --- drivers/net/bnx2.h | 9 ++++++--- drivers/net/cnic.c | 6 +++--- 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 6c7f795d12d..a4d83409f20 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -361,9 +361,12 @@ struct l2_fhdr { #define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28) #define BNX2_L2CTX_HOST_BDIDX 0x00000004 -#define BNX2_L2CTX_STATUSB_NUM_SHIFT 16 -#define BNX2_L2CTX_STATUSB_NUM(sb_id) \ - (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0) +#define BNX2_L2CTX_L5_STATUSB_NUM_SHIFT 16 +#define BNX2_L2CTX_L2_STATUSB_NUM_SHIFT 24 +#define BNX2_L2CTX_L5_STATUSB_NUM(sb_id) \ + (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L5_STATUSB_NUM_SHIFT) : 0) +#define BNX2_L2CTX_L2_STATUSB_NUM(sb_id) \ + (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT) : 0) #define BNX2_L2CTX_HOST_BSEQ 0x00000008 #define BNX2_L2CTX_NX_BSEQ 0x0000000c #define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010 diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c index 46c87ec7960..3bf1b04f2ca 100644 --- a/drivers/net/cnic.c +++ b/drivers/net/cnic.c @@ -2264,9 +2264,9 @@ static void cnic_init_bnx2_rx_ring(struct cnic_dev *dev) cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_CTX_TYPE, val); if (sb_id == 0) - val = 2 << BNX2_L2CTX_STATUSB_NUM_SHIFT; + val = 2 << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT; else - val = BNX2_L2CTX_STATUSB_NUM(sb_id); + val = BNX2_L2CTX_L2_STATUSB_NUM(sb_id); cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_HOST_BDIDX, val); rxbd = (struct rx_bd *) (cp->l2_ring + BCM_PAGE_SIZE); @@ -2423,7 +2423,7 @@ static int cnic_start_bnx2_hw(struct cnic_dev *dev) cp->int_num = 0; if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) { u32 sb_id = cp->status_blk_num; - u32 sb = BNX2_L2CTX_STATUSB_NUM(sb_id); + u32 sb = BNX2_L2CTX_L5_STATUSB_NUM(sb_id); cp->int_num = sb_id << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT; cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_HOST_QIDX, sb); -- GitLab From 345056af41feeda506a8993474b9cbb2c66bc9fb Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 28 Oct 2009 03:43:49 -0700 Subject: [PATCH 0259/1165] sfc: Set ip_summed correctly for page buffers passed to GRO Page buffers containing packets with an incorrect checksum or using a protocol not handled by hardware checksum offload were previously not passed to LRO. The conversion to GRO changed this, but did not set the ip_summed value accordingly. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- drivers/net/sfc/rx.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index 01f9432c31e..98bff5ada09 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -444,7 +444,8 @@ static void efx_rx_packet__check_len(struct efx_rx_queue *rx_queue, * the appropriate LRO method */ static void efx_rx_packet_lro(struct efx_channel *channel, - struct efx_rx_buffer *rx_buf) + struct efx_rx_buffer *rx_buf, + bool checksummed) { struct napi_struct *napi = &channel->napi_str; @@ -466,7 +467,8 @@ static void efx_rx_packet_lro(struct efx_channel *channel, skb->len = rx_buf->len; skb->data_len = rx_buf->len; skb->truesize += rx_buf->len; - skb->ip_summed = CHECKSUM_UNNECESSARY; + skb->ip_summed = + checksummed ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE; napi_gro_frags(napi); @@ -475,6 +477,7 @@ out: rx_buf->page = NULL; } else { EFX_BUG_ON_PARANOID(!rx_buf->skb); + EFX_BUG_ON_PARANOID(!checksummed); napi_gro_receive(napi, rx_buf->skb); rx_buf->skb = NULL; @@ -570,7 +573,7 @@ void __efx_rx_packet(struct efx_channel *channel, } if (likely(checksummed || rx_buf->page)) { - efx_rx_packet_lro(channel, rx_buf); + efx_rx_packet_lro(channel, rx_buf, checksummed); goto done; } -- GitLab From 03f191bab77c0148e458dbbd0a37241be2a2faf9 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Wed, 28 Oct 2009 04:03:38 -0700 Subject: [PATCH 0260/1165] virtio-net: fix data corruption with OOM virtio net used to unlink skbs from send queues on error, but ever since 48925e372f04f5e35fec6269127c62b2c71ab794 we do not do this. This causes guest data corruption and crashes with vhost since net core can requeue the skb or free it without it being taken off the list. This patch fixes this by queueing the skb after successful transmit. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 54bf0912b73..d9ebac8a2d9 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -517,8 +517,7 @@ again: /* Free up any pending old buffers before queueing new ones. */ free_old_xmit_skbs(vi); - /* Put new one in send queue and do transmit */ - __skb_queue_head(&vi->send, skb); + /* Try to transmit */ capacity = xmit_skb(vi, skb); /* This can happen with OOM and indirect buffers. */ @@ -532,8 +531,17 @@ again: } return NETDEV_TX_BUSY; } - vi->svq->vq_ops->kick(vi->svq); + + /* + * Put new one in send queue. You'd expect we'd need this before + * xmit_skb calls add_buf(), since the callback can be triggered + * immediately after that. But since the callback just triggers + * another call back here, normal network xmit locking prevents the + * race. + */ + __skb_queue_head(&vi->send, skb); + /* Don't wait up for transmitted skbs to be freed. */ skb_orphan(skb); nf_reset(skb); -- GitLab From 403a91b1659cb149dbddc5885f892734ae4542d8 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 29 Oct 2009 00:25:59 +0900 Subject: [PATCH 0261/1165] percpu: allow pcpu_alloc() to be called with IRQs off pcpu_alloc() and pcpu_extend_area_map() perform a series of spin_lock_irq()/spin_unlock_irq() calls, which make them unsafe with respect to being called from contexts which have IRQs off. This patch converts the code to perform save/restore of flags instead, making pcpu_alloc() (or __alloc_percpu() respectively) to be called from early kernel startup stage, where IRQs are off. This is needed for proper initialization of per-cpu rq_weight data from sched_init(). tj: added comment explaining why irqsave/restore is used in alloc path. Signed-off-by: Jiri Kosina Acked-by: Ingo Molnar Signed-off-by: Tejun Heo --- mm/percpu.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) diff --git a/mm/percpu.c b/mm/percpu.c index 6af78c1ee70..d90797160c2 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -153,7 +153,10 @@ static int pcpu_reserved_chunk_limit; * * During allocation, pcpu_alloc_mutex is kept locked all the time and * pcpu_lock is grabbed and released as necessary. All actual memory - * allocations are done using GFP_KERNEL with pcpu_lock released. + * allocations are done using GFP_KERNEL with pcpu_lock released. In + * general, percpu memory can't be allocated with irq off but + * irqsave/restore are still used in alloc path so that it can be used + * from early init path - sched_init() specifically. * * Free path accesses and alters only the index data structures, so it * can be safely called from atomic context. When memory needs to be @@ -366,7 +369,7 @@ static struct pcpu_chunk *pcpu_chunk_addr_search(void *addr) * RETURNS: * 0 if noop, 1 if successfully extended, -errno on failure. */ -static int pcpu_extend_area_map(struct pcpu_chunk *chunk) +static int pcpu_extend_area_map(struct pcpu_chunk *chunk, unsigned long *flags) { int new_alloc; int *new; @@ -376,7 +379,7 @@ static int pcpu_extend_area_map(struct pcpu_chunk *chunk) if (chunk->map_alloc >= chunk->map_used + 2) return 0; - spin_unlock_irq(&pcpu_lock); + spin_unlock_irqrestore(&pcpu_lock, *flags); new_alloc = PCPU_DFL_MAP_ALLOC; while (new_alloc < chunk->map_used + 2) @@ -384,7 +387,7 @@ static int pcpu_extend_area_map(struct pcpu_chunk *chunk) new = pcpu_mem_alloc(new_alloc * sizeof(new[0])); if (!new) { - spin_lock_irq(&pcpu_lock); + spin_lock_irqsave(&pcpu_lock, *flags); return -ENOMEM; } @@ -393,7 +396,7 @@ static int pcpu_extend_area_map(struct pcpu_chunk *chunk) * could have happened inbetween, so map_used couldn't have * grown. */ - spin_lock_irq(&pcpu_lock); + spin_lock_irqsave(&pcpu_lock, *flags); BUG_ON(new_alloc < chunk->map_used + 2); size = chunk->map_alloc * sizeof(chunk->map[0]); @@ -1047,6 +1050,7 @@ static void *pcpu_alloc(size_t size, size_t align, bool reserved) struct pcpu_chunk *chunk; const char *err; int slot, off; + unsigned long flags; if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) { WARN(true, "illegal size (%zu) or align (%zu) for " @@ -1055,13 +1059,13 @@ static void *pcpu_alloc(size_t size, size_t align, bool reserved) } mutex_lock(&pcpu_alloc_mutex); - spin_lock_irq(&pcpu_lock); + spin_lock_irqsave(&pcpu_lock, flags); /* serve reserved allocations from the reserved chunk if available */ if (reserved && pcpu_reserved_chunk) { chunk = pcpu_reserved_chunk; if (size > chunk->contig_hint || - pcpu_extend_area_map(chunk) < 0) { + pcpu_extend_area_map(chunk, &flags) < 0) { err = "failed to extend area map of reserved chunk"; goto fail_unlock; } @@ -1079,7 +1083,7 @@ restart: if (size > chunk->contig_hint) continue; - switch (pcpu_extend_area_map(chunk)) { + switch (pcpu_extend_area_map(chunk, &flags)) { case 0: break; case 1: @@ -1096,7 +1100,7 @@ restart: } /* hmmm... no space left, create a new chunk */ - spin_unlock_irq(&pcpu_lock); + spin_unlock_irqrestore(&pcpu_lock, flags); chunk = alloc_pcpu_chunk(); if (!chunk) { @@ -1104,16 +1108,16 @@ restart: goto fail_unlock_mutex; } - spin_lock_irq(&pcpu_lock); + spin_lock_irqsave(&pcpu_lock, flags); pcpu_chunk_relocate(chunk, -1); goto restart; area_found: - spin_unlock_irq(&pcpu_lock); + spin_unlock_irqrestore(&pcpu_lock, flags); /* populate, map and clear the area */ if (pcpu_populate_chunk(chunk, off, size)) { - spin_lock_irq(&pcpu_lock); + spin_lock_irqsave(&pcpu_lock, flags); pcpu_free_area(chunk, off); err = "failed to populate"; goto fail_unlock; @@ -1125,7 +1129,7 @@ area_found: return __addr_to_pcpu_ptr(chunk->base_addr + off); fail_unlock: - spin_unlock_irq(&pcpu_lock); + spin_unlock_irqrestore(&pcpu_lock, flags); fail_unlock_mutex: mutex_unlock(&pcpu_alloc_mutex); if (warn_limit) { -- GitLab From 4a6cc4bd32e580722882115d4c8b964d732c11e4 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 29 Oct 2009 00:26:00 +0900 Subject: [PATCH 0262/1165] sched: move rq_weight data array out of .percpu Commit 34d76c41 introduced percpu array update_shares_data, size of which being proportional to NR_CPUS. Unfortunately this blows up ia64 for large NR_CPUS configuration, as ia64 allows only 64k for .percpu section. Fix this by allocating this array dynamically and keep only pointer to it percpu. The per-cpu handling doesn't impose significant performance penalty on potentially contented path in tg_shares_up(). ... ffffffff8104337c: 65 48 8b 14 25 20 cd mov %gs:0xcd20,%rdx ffffffff81043383: 00 00 ffffffff81043385: 48 c7 c0 00 e1 00 00 mov $0xe100,%rax ffffffff8104338c: 48 c7 45 a0 00 00 00 movq $0x0,-0x60(%rbp) ffffffff81043393: 00 ffffffff81043394: 48 c7 45 a8 00 00 00 movq $0x0,-0x58(%rbp) ffffffff8104339b: 00 ffffffff8104339c: 48 01 d0 add %rdx,%rax ffffffff8104339f: 49 8d 94 24 08 01 00 lea 0x108(%r12),%rdx ffffffff810433a6: 00 ffffffff810433a7: b9 ff ff ff ff mov $0xffffffff,%ecx ffffffff810433ac: 48 89 45 b0 mov %rax,-0x50(%rbp) ffffffff810433b0: bb 00 04 00 00 mov $0x400,%ebx ffffffff810433b5: 48 89 55 c0 mov %rdx,-0x40(%rbp) ... After: ... ffffffff8104337c: 65 8b 04 25 28 cd 00 mov %gs:0xcd28,%eax ffffffff81043383: 00 ffffffff81043384: 48 98 cltq ffffffff81043386: 49 8d bc 24 08 01 00 lea 0x108(%r12),%rdi ffffffff8104338d: 00 ffffffff8104338e: 48 8b 15 d3 7f 76 00 mov 0x767fd3(%rip),%rdx # ffffffff817ab368 ffffffff81043395: 48 8b 34 c5 00 ee 6d mov -0x7e921200(,%rax,8),%rsi ffffffff8104339c: 81 ffffffff8104339d: 48 c7 45 a0 00 00 00 movq $0x0,-0x60(%rbp) ffffffff810433a4: 00 ffffffff810433a5: b9 ff ff ff ff mov $0xffffffff,%ecx ffffffff810433aa: 48 89 7d c0 mov %rdi,-0x40(%rbp) ffffffff810433ae: 48 c7 45 a8 00 00 00 movq $0x0,-0x58(%rbp) ffffffff810433b5: 00 ffffffff810433b6: bb 00 04 00 00 mov $0x400,%ebx ffffffff810433bb: 48 01 f2 add %rsi,%rdx ffffffff810433be: 48 89 55 b0 mov %rdx,-0x50(%rbp) ... Signed-off-by: Jiri Kosina Acked-by: Ingo Molnar Signed-off-by: Tejun Heo --- kernel/sched.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index ee61f454a98..526d237b8ce 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1563,11 +1563,7 @@ static unsigned long cpu_avg_load_per_task(int cpu) #ifdef CONFIG_FAIR_GROUP_SCHED -struct update_shares_data { - unsigned long rq_weight[NR_CPUS]; -}; - -static DEFINE_PER_CPU(struct update_shares_data, update_shares_data); +static __read_mostly unsigned long *update_shares_data; static void __set_se_shares(struct sched_entity *se, unsigned long shares); @@ -1577,12 +1573,12 @@ static void __set_se_shares(struct sched_entity *se, unsigned long shares); static void update_group_shares_cpu(struct task_group *tg, int cpu, unsigned long sd_shares, unsigned long sd_rq_weight, - struct update_shares_data *usd) + unsigned long *usd_rq_weight) { unsigned long shares, rq_weight; int boost = 0; - rq_weight = usd->rq_weight[cpu]; + rq_weight = usd_rq_weight[cpu]; if (!rq_weight) { boost = 1; rq_weight = NICE_0_LOAD; @@ -1617,7 +1613,7 @@ static void update_group_shares_cpu(struct task_group *tg, int cpu, static int tg_shares_up(struct task_group *tg, void *data) { unsigned long weight, rq_weight = 0, shares = 0; - struct update_shares_data *usd; + unsigned long *usd_rq_weight; struct sched_domain *sd = data; unsigned long flags; int i; @@ -1626,11 +1622,11 @@ static int tg_shares_up(struct task_group *tg, void *data) return 0; local_irq_save(flags); - usd = &__get_cpu_var(update_shares_data); + usd_rq_weight = per_cpu_ptr(update_shares_data, smp_processor_id()); for_each_cpu(i, sched_domain_span(sd)) { weight = tg->cfs_rq[i]->load.weight; - usd->rq_weight[i] = weight; + usd_rq_weight[i] = weight; /* * If there are currently no tasks on the cpu pretend there @@ -1651,7 +1647,7 @@ static int tg_shares_up(struct task_group *tg, void *data) shares = tg->shares; for_each_cpu(i, sched_domain_span(sd)) - update_group_shares_cpu(tg, i, shares, rq_weight, usd); + update_group_shares_cpu(tg, i, shares, rq_weight, usd_rq_weight); local_irq_restore(flags); @@ -9406,6 +9402,10 @@ void __init sched_init(void) #endif /* CONFIG_USER_SCHED */ #endif /* CONFIG_GROUP_SCHED */ +#if defined CONFIG_FAIR_GROUP_SCHED && defined CONFIG_SMP + update_shares_data = __alloc_percpu(nr_cpu_ids * sizeof(unsigned long), + __alignof__(unsigned long)); +#endif for_each_possible_cpu(i) { struct rq *rq; -- GitLab From 52a2b11cafb1b14bacfc65a20966da5ba3a863e1 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 1 Oct 2009 15:48:40 -0700 Subject: [PATCH 0263/1165] ACPI: clean up video.c boundary checks and types proc.c and video.c are a bit sloppy around types and style, confusing gcc for a new feature that'll be in 2.6.33 and will cause a warning on the current code. This patch changes if (foo + 1 > sizeof bar) into if (foo >= sizeof(bar)) which is more kernel-style. it also changes a variable in proc.c to unsigned; it gets assigned a value from an unsigned type, and is then only compared for > not for negative, so using unsigned is just outright the right type Signed-off-by: Arjan van de Ven Signed-off-by: Len Brown --- drivers/acpi/proc.c | 2 +- drivers/acpi/video.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index f8b6f555ba5..d0d25e2e1ce 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -393,7 +393,7 @@ acpi_system_write_wakeup_device(struct file *file, struct list_head *node, *next; char strbuf[5]; char str[5] = ""; - int len = count; + unsigned int len = count; struct acpi_device *found_dev = NULL; if (len > 4) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 64e3c581b7a..05dff631591 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1223,7 +1223,7 @@ acpi_video_device_write_state(struct file *file, u32 state = 0; - if (!dev || count + 1 > sizeof str) + if (!dev || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1280,7 +1280,7 @@ acpi_video_device_write_brightness(struct file *file, int i; - if (!dev || !dev->brightness || count + 1 > sizeof str) + if (!dev || !dev->brightness || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1562,7 +1562,7 @@ acpi_video_bus_write_POST(struct file *file, unsigned long long opt, options; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; status = acpi_video_bus_POST_options(video, &options); @@ -1602,7 +1602,7 @@ acpi_video_bus_write_DOS(struct file *file, unsigned long opt; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) -- GitLab From ca0207114f1708b563f510b7781a360ec5b98359 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 28 Oct 2009 18:02:26 +0100 Subject: [PATCH 0264/1165] x86/amd-iommu: Un__init function required on shutdown The function iommu_feature_disable is required on system shutdown to disable the IOMMU but it is marked as __init. This may result in a panic if the memory is reused. This patch fixes this bug. Signed-off-by: Joerg Roedel --- arch/x86/kernel/amd_iommu_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 498c8c79aaa..1e423b2add1 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -240,7 +240,7 @@ static void iommu_feature_enable(struct amd_iommu *iommu, u8 bit) writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET); } -static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit) +static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit) { u32 ctrl; -- GitLab From e3d8024891dbfec6cf36c9b76177650f48118462 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 22 Sep 2009 16:48:56 +0100 Subject: [PATCH 0265/1165] ARM: S3C: Add info for supporting circular DMA buffers The S3C64XX DMA implementation will work a lot better with the ability to enqueue circular buffers as the hardware can do it's own linked-list management. Add a function s3c_dma_has_circular() to show that the system can do this and a flag for the channel. Update the s3c24xx/s3c64xx I2S DMA code to deal with this. Signed-off-by: Ben Dooks Signed-off-by: Ben Dooks Acked-by: Mark Brown --- arch/arm/mach-s3c2410/include/mach/dma.h | 7 +++++++ arch/arm/mach-s3c6400/include/mach/dma.h | 5 +++++ sound/soc/s3c24xx/s3c24xx-pcm.c | 17 +++++++++++++++-- 3 files changed, 27 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index c3a2629e0de..92e2687009e 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -110,6 +110,8 @@ enum s3c2410_dma_loadst { * waiting for reloads */ #define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */ +#define S3C2410_DMAF_CIRCULAR (1 << 2) /* no circular dma support */ + /* dma buffer */ struct s3c2410_dma_buf; @@ -194,4 +196,9 @@ struct s3c2410_dma_chan { typedef unsigned long dma_device_t; +static inline bool s3c_dma_has_circular(void) +{ + return false; +} + #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h index 1067619f0ba..004edab2395 100644 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -68,6 +68,11 @@ static __inline__ int s3c_dma_has_circular(void) #define S3C2410_DMAF_CIRCULAR (1 << 0) +static inline bool s3c_dma_has_circular(void) +{ + return false; +} + #include #endif /* __ASM_ARCH_IRQ_H */ diff --git a/sound/soc/s3c24xx/s3c24xx-pcm.c b/sound/soc/s3c24xx/s3c24xx-pcm.c index 5cbbdc80fde..1f35c6fcf5f 100644 --- a/sound/soc/s3c24xx/s3c24xx-pcm.c +++ b/sound/soc/s3c24xx/s3c24xx-pcm.c @@ -75,11 +75,19 @@ static void s3c24xx_pcm_enqueue(struct snd_pcm_substream *substream) { struct s3c24xx_runtime_data *prtd = substream->runtime->private_data; dma_addr_t pos = prtd->dma_pos; + unsigned int limit; int ret; pr_debug("Entered %s\n", __func__); - while (prtd->dma_loaded < prtd->dma_limit) { + if (s3c_dma_has_circular()) { + limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period; + } else + limit = prtd->dma_limit; + + pr_debug("%s: loaded %d, limit %d\n", __func__, prtd->dma_loaded, limit); + + while (prtd->dma_loaded < limit) { unsigned long len = prtd->dma_period; pr_debug("dma_loaded: %d\n", prtd->dma_loaded); @@ -123,7 +131,7 @@ static void s3c24xx_audio_buffdone(struct s3c2410_dma_chan *channel, snd_pcm_period_elapsed(substream); spin_lock(&prtd->lock); - if (prtd->state & ST_RUNNING) { + if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) { prtd->dma_loaded--; s3c24xx_pcm_enqueue(substream); } @@ -164,6 +172,11 @@ static int s3c24xx_pcm_hw_params(struct snd_pcm_substream *substream, printk(KERN_ERR "failed to get dma channel\n"); return ret; } + + /* use the circular buffering if we have it available. */ + if (s3c_dma_has_circular()) + s3c2410_dma_setflags(prtd->params->channel, + S3C2410_DMAF_CIRCULAR); } s3c2410_dma_set_buffdone_fn(prtd->params->channel, -- GitLab From b4719cd62707ca6f1a4d55b89066a7b9acc72347 Mon Sep 17 00:00:00 2001 From: Ramax Lo Date: Tue, 22 Sep 2009 00:04:16 +0800 Subject: [PATCH 0266/1165] ARM: S3C24XX: Define a macro to avoid compilation error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Define a macro to avoid the following error during kernel build process for platforms other than s3c2410: arch/arm/plat-s3c24xx/cpu.c:84: error: ‘s3c2410a_init’ undeclared here (not in a function) Signed-off-by: Ramax Lo Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/include/plat/s3c2410.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h index b6deeef8f66..82ab4aad1bb 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h @@ -27,6 +27,7 @@ extern void s3c2410_init_clocks(int xtal); #define s3c2410_init_uarts NULL #define s3c2410_map_io NULL #define s3c2410_init NULL +#define s3c2410a_init NULL #endif extern int s3c2410_baseclk_add(void); -- GitLab From f5fb9b1a15285fde54c6b70cf35d328333e5b519 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Tue, 22 Sep 2009 21:40:39 +0100 Subject: [PATCH 0267/1165] ARM: S3C24XX: Introduce S3C2442B CPU Add the S3C2442B CPU ID to aid support the Openmoko GTA02 / Freerunner. Signed-off-by: Harald Welte Signed-off-by: Andy Green Signed-off-by: Nelson Castillo [ben-linux@fluff.org: edit description for clarity and S3C2442B as uppercase] Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/cpu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 5447e60f393..4af9dd94879 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -61,6 +61,7 @@ static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2440[] = "S3C2440"; static const char name_s3c2442[] = "S3C2442"; +static const char name_s3c2442b[] = "S3C2442B"; static const char name_s3c2443[] = "S3C2443"; static const char name_s3c2410a[] = "S3C2410A"; static const char name_s3c2440a[] = "S3C2440A"; @@ -111,6 +112,15 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2442_init, .name = name_s3c2442 }, + { + .idcode = 0x32440aab, + .idmask = 0xffffffff, + .map_io = s3c244x_map_io, + .init_clocks = s3c244x_init_clocks, + .init_uarts = s3c244x_init_uarts, + .init = s3c2442_init, + .name = name_s3c2442b + }, { .idcode = 0x32412001, .idmask = 0xffffffff, -- GitLab From 2e31de6511a47738974d6b48fdc60c4f82f80d24 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 14 Oct 2009 10:13:22 +0100 Subject: [PATCH 0268/1165] ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set Fix the link errors if cpu-frequency support is enabled on s3c2410 systems but there is no CONFIG_S3C2410_IOTIMING set. Fix this by ensuring the relevant symbols are defined NULL if the code is not being built in. Fixes the following error: arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_get' arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_set' arch/arm/mach-s3c2410/built-in.o: undefined reference to `s3c2410_iotiming_calc' Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h index efeb025affc..c776120b99e 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h @@ -222,7 +222,9 @@ extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); /* S3C2410 and compatible exported functions */ extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); +extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); +#ifdef CONFIG_S3C2410_IOTIMING extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); @@ -231,8 +233,11 @@ extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, struct s3c_iotimings *iot); - -extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); +#else +#define s3c2410_iotiming_calc NULL +#define s3c2410_iotiming_get NULL +#define s3c2410_iotiming_set NULL +#endif /* CONFIG_S3C2410_IOTIMING */ /* S3C2412 compatible routines */ -- GitLab From d3bf3956c75b38def079fb6db40b5cf3f1466a93 Mon Sep 17 00:00:00 2001 From: Ryan Mallon Date: Wed, 14 Oct 2009 09:18:30 +1300 Subject: [PATCH 0269/1165] ARM: S3C: Fix adc function exports Fix the export of s3c_adc_read. Signed-off-by: Ryan Mallon [ben-linux@fluff.org: remove unexport of s3c_adc_start, needed for ts] Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/adc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c index 4d36b784fb8..df47322492d 100644 --- a/arch/arm/plat-s3c24xx/adc.c +++ b/arch/arm/plat-s3c24xx/adc.c @@ -189,7 +189,7 @@ int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch) err: return ret; } -EXPORT_SYMBOL_GPL(s3c_adc_convert); +EXPORT_SYMBOL_GPL(s3c_adc_read); static void s3c_adc_default_select(struct s3c_adc_client *client, unsigned select) -- GitLab From 60e5c1b5ecd99e06d3133a2a20d58d3c2b9968ac Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:42:49 +0200 Subject: [PATCH 0270/1165] ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test If the NULL test on buf is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/dma.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 196b1912365..f046f8c5108 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -208,14 +208,14 @@ s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan, { unsigned long reload; - pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", - buf, (unsigned long)buf->data, buf->size); - if (buf == NULL) { dmawarn("buffer is NULL\n"); return -EINVAL; } + pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n", + buf, (unsigned long)buf->data, buf->size); + /* check the state of the channel before we do anything */ if (chan->load_state == S3C2410_DMALOAD_1LOADED) { -- GitLab From 0bfb34f3a168ee598164803ab3147dd41fc3f843 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 26 Oct 2009 20:37:21 +0000 Subject: [PATCH 0271/1165] ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST Fix missing select of S3C_DEV_USB_HOST when building for mini2440 only. Fixes the following error: built-in.o: undefined reference to `s3c_device_usb` Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index d7bba919a77..a8b69d77571 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -103,6 +103,7 @@ config MACH_MINI2440 select LEDS_TRIGGER_BACKLIGHT select SND_S3C24XX_SOC_S3C24XX_UDA134X select S3C_DEV_NAND + select S3C_DEV_USB_HOST help Say Y here to select support for the MINI2440. Is a 10cm x 10cm board available via various sources. It can come with a 3.5" or 7" touch LCD. -- GitLab From 365854af7e393591d980998dec350b6d9ee695ee Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 26 Oct 2009 21:17:15 +0000 Subject: [PATCH 0272/1165] ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c Fix the following warnings from sparse in arch/arm/plat-s3c24xx/gpio. due to the missing include of gpio.c:36:6: warning: symbol 's3c2410_gpio_cfgpin' was not declared. Should it be static? gpio.c:84:14: warning: symbol 's3c2410_gpio_getcfg' was not declared. Should it be static? gpio.c:103:6: warning: symbol 's3c2410_gpio_pullup' was not declared. Should it be static? gpio.c:125:5: warning: symbol 's3c2410_gpio_getpull' was not declared. Should it be static? gpio.c:138:6: warning: symbol 's3c2410_gpio_setpin' was not declared. Should it be static? gpio.c:157:14: warning: symbol 's3c2410_gpio_getpin' was not declared. Should it be static? gpio.c:184:5: warning: symbol 's3c2410_gpio_getirq' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/plat-s3c24xx/gpio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c index 95df059b5a1..5467470badf 100644 --- a/arch/arm/plat-s3c24xx/gpio.c +++ b/arch/arm/plat-s3c24xx/gpio.c @@ -29,6 +29,7 @@ #include #include +#include #include #include -- GitLab From 0070994783cc7953416cf5da2e190c05edb01391 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 26 Oct 2009 21:19:27 +0000 Subject: [PATCH 0273/1165] ARM: S3C2440: mini2440: Fix spare warnings Fix the following sparse warnings in arch/arm/mach-s3c2440/mach-mini2440.c due to missing 'static'. warning: symbol 'mini2440_lcd_cfg' was not declared. Should it be static? warning: symbol 'mini2440_fb_info' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2440/mach-mini2440.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index ec71a696578..1c3382fefdd 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -144,7 +144,7 @@ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { .type = (S3C2410_LCDCON1_TFT16BPP |\ S3C2410_LCDCON1_TFT) -struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { +static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { [0] = { /* mini2440 + 3.5" TFT + touchscreen */ _LCD_DECLARE( 7, /* The 3.5 is quite fast */ @@ -191,7 +191,7 @@ struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = { #define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) #define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) -struct s3c2410fb_mach_info mini2440_fb_info __initdata = { +static struct s3c2410fb_mach_info mini2440_fb_info __initdata = { .displays = &mini2440_lcd_cfg[0], /* not constant! see init */ .num_displays = 1, .default_display = 0, -- GitLab From 620abe28776d8cec0a275fac25e254c1f0bc1c73 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 26 Oct 2009 21:21:32 +0000 Subject: [PATCH 0274/1165] ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c Fix sparse warning in arch/arm/mach-s3c2410/gpio.c due to missing include of . Fixes the following warning: warning: symbol 's3c2410_gpio_irqfilter' was not declared. Should it be static? Signed-off-by: Ben Dooks --- arch/arm/mach-s3c2410/gpio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index 7974afca297..9664e011dae 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -28,6 +28,7 @@ #include #include +#include #include #include -- GitLab From 11df6dddcbc38affb7473aad3d962baf8414a947 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 28 Oct 2009 20:26:48 +0100 Subject: [PATCH 0275/1165] futex: Fix spurious wakeup for requeue_pi really The requeue_pi path doesn't use unqueue_me() (and the racy lock_ptr == NULL test) nor does it use the wake_list of futex_wake() which where the reason for commit 41890f2 (futex: Handle spurious wake up) See debugging discussing on LKML Message-ID: <4AD4080C.20703@us.ibm.com> The changes in this fix to the wait_requeue_pi path were considered to be a likely unecessary, but harmless safety net. But it turns out that due to the fact that for unknown $@#!*( reasons EWOULDBLOCK is defined as EAGAIN we built an endless loop in the code path which returns correctly EWOULDBLOCK. Spurious wakeups in wait_requeue_pi code path are unlikely so we do the easy solution and return EWOULDBLOCK^WEAGAIN to user space and let it deal with the spurious wakeup. Cc: Darren Hart Cc: Peter Zijlstra Cc: Eric Dumazet Cc: John Stultz Cc: Dinakar Guniguntala LKML-Reference: <4AE23C74.1090502@us.ibm.com> Cc: stable@kernel.org Signed-off-by: Thomas Gleixner --- kernel/futex.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/kernel/futex.c b/kernel/futex.c index 642f3bbaacc..fb65e822fc4 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -2127,7 +2127,7 @@ int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb, plist_del(&q->list, &q->list.plist); /* Handle spurious wakeups gracefully */ - ret = -EAGAIN; + ret = -EWOULDBLOCK; if (timeout && !timeout->task) ret = -ETIMEDOUT; else if (signal_pending(current)) @@ -2208,7 +2208,6 @@ static int futex_wait_requeue_pi(u32 __user *uaddr, int fshared, debug_rt_mutex_init_waiter(&rt_waiter); rt_waiter.task = NULL; -retry: key2 = FUTEX_KEY_INIT; ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE); if (unlikely(ret != 0)) @@ -2303,9 +2302,6 @@ out_put_keys: out_key2: put_futex_key(fshared, &key2); - /* Spurious wakeup ? */ - if (ret == -EAGAIN) - goto retry; out: if (to) { hrtimer_cancel(&to->timer); -- GitLab From 0b22bd0ba0d500ab40e7673c591c594ec5447342 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Thu, 22 Oct 2009 15:06:06 +0200 Subject: [PATCH 0276/1165] virtio-pci: fix per-vq MSI-X request logic Commit f68d24082e22ccee3077d11aeb6dc5354f0ca7f1 in 2.6.32-rc1 broke requesting IRQs for per-VQ MSI-X vectors: - vector number was used instead of the vector itself - we try to request an IRQ for VQ which does not have a callback handler This is a regression that causes warnings in kernel log, potentially lower performance as we need to scan vq list, and might cause system failure if the interrupt requested is in fact needed by another system. This was not noticed earlier because in most cases we were falling back on shared interrupt for all vqs. The warnings often look like this: virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X virtio-pci 0000:00:03.0: irq 28 for MSI/MSI-X IRQ handler type mismatch for IRQ 1 current handler: i8042 Pid: 2400, comm: modprobe Tainted: G W 2.6.32-rc3-11952-gf3ed8d8-dirty #1 Call Trace: [] ? __setup_irq+0x299/0x304 [] ? request_threaded_irq+0x144/0x1c1 [] ? vring_interrupt+0x0/0x30 [] ? vp_try_to_find_vqs+0x583/0x5c7 [] ? skb_recv_done+0x0/0x34 [virtio_net] [] ? vp_find_vqs+0x2d/0x83 [] ? vp_get+0x3c/0x4e [] ? virtnet_probe+0x2f1/0x428 [virtio_net] [] ? skb_recv_done+0x0/0x34 [virtio_net] [] ? skb_xmit_done+0x0/0x39 [virtio_net] [] ? sysfs_do_create_link+0xcb/0x116 [] ? vp_get_status+0x14/0x16 [] ? virtio_dev_probe+0xa9/0xc8 [] ? driver_probe_device+0x8d/0x128 [] ? __driver_attach+0x4f/0x6f [] ? __driver_attach+0x0/0x6f [] ? bus_for_each_dev+0x43/0x74 [] ? bus_add_driver+0xea/0x22d [] ? driver_register+0xa7/0x111 [] ? init+0x0/0xc [virtio_net] [] ? do_one_initcall+0x50/0x148 [] ? sys_init_module+0xc5/0x21a [] ? system_call_fastpath+0x16/0x1b virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X Reported-by: Marcelo Tosatti Reported-by: Shirley Ma Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- drivers/virtio/virtio_pci.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 4a1f1ebff7b..28d9cf7cf72 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -530,19 +530,22 @@ static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs, err = PTR_ERR(vqs[i]); goto error_find; } + + if (!vp_dev->per_vq_vectors || msix_vec == VIRTIO_MSI_NO_VECTOR) + continue; + /* allocate per-vq irq if available and necessary */ - if (vp_dev->per_vq_vectors) { - snprintf(vp_dev->msix_names[msix_vec], - sizeof *vp_dev->msix_names, - "%s-%s", - dev_name(&vp_dev->vdev.dev), names[i]); - err = request_irq(msix_vec, vring_interrupt, 0, - vp_dev->msix_names[msix_vec], - vqs[i]); - if (err) { - vp_del_vq(vqs[i]); - goto error_find; - } + snprintf(vp_dev->msix_names[msix_vec], + sizeof *vp_dev->msix_names, + "%s-%s", + dev_name(&vp_dev->vdev.dev), names[i]); + err = request_irq(vp_dev->msix_entries[msix_vec].vector, + vring_interrupt, 0, + vp_dev->msix_names[msix_vec], + vqs[i]); + if (err) { + vp_del_vq(vqs[i]); + goto error_find; } } return 0; -- GitLab From 2d61ba95034f1abbdec7729d52c740870a5eddb6 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 25 Oct 2009 15:28:53 +0200 Subject: [PATCH 0277/1165] virtio: order used ring after used index read On SMP guests, reads from the ring might bypass used index reads. This causes guest crashes because host writes to used index to signal ring data readiness. Fix this by inserting rmb before used ring reads. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell Cc: stable@kernel.org --- drivers/virtio/virtio_ring.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index f5360058072..fbd2ecde93e 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -285,6 +285,9 @@ static void *vring_get_buf(struct virtqueue *_vq, unsigned int *len) return NULL; } + /* Only get used array entries after they have been exposed by host. */ + rmb(); + i = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].id; *len = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].len; -- GitLab From 65afac7d80ab3bc9f81e75eafb71eeb92a3ebdef Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 29 Oct 2009 08:56:16 -0600 Subject: [PATCH 0278/1165] param: fix lots of bugs with writing charp params from sysfs, by leaking mem. e180a6b7759a "param: fix charp parameters set via sysfs" fixed the case where charp parameters written via sysfs were freed, leaving drivers accessing random memory. Unfortunately, storing a flag in the kparam struct was a bad idea: it's rodata so setting it causes an oops on some archs. But that's not all: 1) module_param_array() on charp doesn't work reliably, since we use an uninitialized temporary struct kernel_param. 2) there's a fundamental race if a module uses this parameter and then it's changed: they will still access the old, freed, memory. The simplest fix (ie. for 2.6.32) is to never free the memory. This prevents all these problems, at cost of a memory leak. In practice, there are only 18 places where a charp is writable via sysfs, and all are root-only writable. Reported-by: Takashi Iwai Cc: Sitsofe Wheeler Cc: Frederic Weisbecker Cc: Christof Schmitt Signed-off-by: Rusty Russell Cc: stable@kernel.org --- include/linux/moduleparam.h | 1 - kernel/params.c | 10 +--------- 2 files changed, 1 insertion(+), 10 deletions(-) diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index 6547c3cdbc4..82a9124f7d7 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -37,7 +37,6 @@ typedef int (*param_set_fn)(const char *val, struct kernel_param *kp); typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp); /* Flag bits for kernel_param.flags */ -#define KPARAM_KMALLOCED 1 #define KPARAM_ISBOOL 2 struct kernel_param { diff --git a/kernel/params.c b/kernel/params.c index 9da58eabdcb..95ef27cf8e8 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -218,13 +218,9 @@ int param_set_charp(const char *val, struct kernel_param *kp) return -ENOSPC; } - if (kp->flags & KPARAM_KMALLOCED) - kfree(*(char **)kp->arg); - /* This is a hack. We can't need to strdup in early boot, and we * don't need to; this mangled commandline is preserved. */ if (slab_is_available()) { - kp->flags |= KPARAM_KMALLOCED; *(char **)kp->arg = kstrdup(val, GFP_KERNEL); if (!kp->arg) return -ENOMEM; @@ -605,11 +601,7 @@ void module_param_sysfs_remove(struct module *mod) void destroy_params(const struct kernel_param *params, unsigned num) { - unsigned int i; - - for (i = 0; i < num; i++) - if (params[i].flags & KPARAM_KMALLOCED) - kfree(*(char **)params[i].arg); + /* FIXME: This should free kmalloced charp parameters. It doesn't. */ } static void __init kernel_add_sysfs_param(const char *name, -- GitLab From d553ad864e3b3dde3f1038d491e207021b2d6293 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 29 Oct 2009 08:56:17 -0600 Subject: [PATCH 0279/1165] param: fix NULL comparison on oom kp->arg is always true: it's the contents of that pointer we care about. Reported-by: Takashi Iwai Signed-off-by: Rusty Russell Cc: stable@kernel.org --- kernel/params.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/params.c b/kernel/params.c index 95ef27cf8e8..00520c43d88 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -222,7 +222,7 @@ int param_set_charp(const char *val, struct kernel_param *kp) * don't need to; this mangled commandline is preserved. */ if (slab_is_available()) { *(char **)kp->arg = kstrdup(val, GFP_KERNEL); - if (!kp->arg) + if (!*(char **)kp->arg) return -ENOMEM; } else *(const char **)kp->arg = val; -- GitLab From 3c7d76e371ac1a3802ae1673f5c63554af59325c Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 29 Oct 2009 08:56:19 -0600 Subject: [PATCH 0280/1165] param: fix setting arrays of bool We create a dummy struct kernel_param on the stack for parsing each array element, but we didn't initialize the flags word. This matters for arrays of type "bool", where the flag indicates if it really is an array of bools or unsigned int (old-style). Reported-by: Takashi Iwai Signed-off-by: Rusty Russell Cc: stable@kernel.org --- kernel/params.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/params.c b/kernel/params.c index 00520c43d88..d656c276508 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -300,6 +300,7 @@ static int param_array(const char *name, unsigned int min, unsigned int max, void *elem, int elemsize, int (*set)(const char *, struct kernel_param *kp), + u16 flags, unsigned int *num) { int ret; @@ -309,6 +310,7 @@ static int param_array(const char *name, /* Get the name right for errors. */ kp.name = name; kp.arg = elem; + kp.flags = flags; /* No equals sign? */ if (!val) { @@ -354,7 +356,8 @@ int param_array_set(const char *val, struct kernel_param *kp) unsigned int temp_num; return param_array(kp->name, val, 1, arr->max, arr->elem, - arr->elemsize, arr->set, arr->num ?: &temp_num); + arr->elemsize, arr->set, kp->flags, + arr->num ?: &temp_num); } int param_array_get(char *buffer, struct kernel_param *kp) -- GitLab From d9d5283228d0c752f199c901fff6e1405dc91bcb Mon Sep 17 00:00:00 2001 From: Jiri Bohac Date: Wed, 28 Oct 2009 22:23:54 -0700 Subject: [PATCH 0281/1165] bonding: fix a race condition in calls to slave MII ioctls In mii monitor mode, bond_check_dev_link() calls the the ioctl handler of slave devices. It stores the ndo_do_ioctl function pointer to a static (!) ioctl variable and later uses it to call the handler with the IOCTL macro. If another thread executes bond_check_dev_link() at the same time (even with a different bond, which none of the locks prevent), a race condition occurs. If the two racing slaves have different drivers, this may result in one driver's ioctl handler being called with a pointer to a net_device controlled with a different driver, resulting in unpredictable breakage. Unless I am overlooking something, the "static" must be a copy'n'paste error (?). Signed-off-by: Jiri Bohac Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3f05267b2cf..40fb5eefc72 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -691,7 +691,7 @@ static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_dev, int reporting) { const struct net_device_ops *slave_ops = slave_dev->netdev_ops; - static int (*ioctl)(struct net_device *, struct ifreq *, int); + int (*ioctl)(struct net_device *, struct ifreq *, int); struct ifreq ifr; struct mii_ioctl_data *mii; -- GitLab From fb5cbe9efd741b16e72133613747f76490bbecd3 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Wed, 28 Oct 2009 22:28:24 -0700 Subject: [PATCH 0282/1165] ocfs2: Return -EINVAL when a device is not ocfs2. In case of non-modular kernels the root filesystem is mounted by trying several filesystems. If ocfs2 was tried before the actual filesystem type, the mount would fail because ocfs2_sb_probe() returns -EAGAIN instead of -EINVAL. ocfs2 will now return -EINVAL properly. Signed-off-by: Joel Becker Reported-by: Laszlo Attila Toth --- fs/ocfs2/super.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index c0e48aeebb1..960673004df 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -773,18 +773,20 @@ static int ocfs2_sb_probe(struct super_block *sb, if (tmpstat < 0) { status = tmpstat; mlog_errno(status); - goto bail; + break; } di = (struct ocfs2_dinode *) (*bh)->b_data; memset(stats, 0, sizeof(struct ocfs2_blockcheck_stats)); spin_lock_init(&stats->b_lock); - status = ocfs2_verify_volume(di, *bh, blksize, stats); - if (status >= 0) - goto bail; - brelse(*bh); - *bh = NULL; - if (status != -EAGAIN) + tmpstat = ocfs2_verify_volume(di, *bh, blksize, stats); + if (tmpstat < 0) { + brelse(*bh); + *bh = NULL; + } + if (tmpstat != -EAGAIN) { + status = tmpstat; break; + } } bail: -- GitLab From 87f4b1bb98696e6cf84f57df7de41f28c2a7dbeb Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 15 Oct 2009 11:10:48 +0800 Subject: [PATCH 0283/1165] ocfs2: Move ocfs2_complete_reflink to the right place. As its name ocfs2_complete_reflink indicates, it should be called after all the work for reflink is done, so it really should be called after we reflink xattr successfully. Signed-off-by: Tao Ma Signed-off-by: Joel Becker Tested-by: Tristan Ye --- fs/ocfs2/refcounttree.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 60287fc56bc..9d439b27730 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -4013,10 +4013,6 @@ static int ocfs2_create_reflink_node(struct inode *s_inode, goto out_unlock_refcount; } - ret = ocfs2_complete_reflink(s_inode, s_bh, t_inode, t_bh, preserve); - if (ret) - mlog_errno(ret); - out_unlock_refcount: ocfs2_unlock_refcount_tree(osb, ref_tree, 1); brelse(ref_root_bh); @@ -4068,9 +4064,17 @@ static int __ocfs2_reflink(struct dentry *old_dentry, ret = ocfs2_reflink_xattrs(inode, old_bh, new_inode, new_bh, preserve); - if (ret) + if (ret) { mlog_errno(ret); + goto inode_unlock; + } } + + ret = ocfs2_complete_reflink(inode, old_bh, + new_inode, new_bh, preserve); + if (ret) + mlog_errno(ret); + inode_unlock: ocfs2_inode_unlock(new_inode, 1); brelse(new_bh); -- GitLab From 2f48d593b6ceb7bb63d34124ceba77d33be298cf Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Thu, 15 Oct 2009 11:10:49 +0800 Subject: [PATCH 0284/1165] ocfs2: duplicate inline data properly during reflink. The old reflink fails to handle inodes with inline data and will oops if it encounters them. This patch copies inline data to the new inode. Extended attributes may still be refcounted. Signed-off-by: Tao Ma Signed-off-by: Joel Becker Tested-by: Tristan Ye --- fs/ocfs2/file.c | 3 ++- fs/ocfs2/refcounttree.c | 55 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 57 insertions(+), 1 deletion(-) diff --git a/fs/ocfs2/file.c b/fs/ocfs2/file.c index 89fc8ee1f5a..de059f49058 100644 --- a/fs/ocfs2/file.c +++ b/fs/ocfs2/file.c @@ -1712,7 +1712,8 @@ int ocfs2_check_range_for_refcount(struct inode *inode, loff_t pos, struct super_block *sb = inode->i_sb; if (!ocfs2_refcount_tree(OCFS2_SB(inode->i_sb)) || - !(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL)) + !(OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_REFCOUNT_FL) || + OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) return 0; cpos = pos >> OCFS2_SB(sb)->s_clustersize_bits; diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 9d439b27730..3a0df7a1b81 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -3743,6 +3743,9 @@ static int ocfs2_attach_refcount_tree(struct inode *inode, goto out; } + if (oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) + goto attach_xattr; + ocfs2_init_dinode_extent_tree(&di_et, INODE_CACHE(inode), di_bh); size = i_size_read(inode); @@ -3769,6 +3772,7 @@ static int ocfs2_attach_refcount_tree(struct inode *inode, cpos += num_clusters; } +attach_xattr: if (oi->ip_dyn_features & OCFS2_HAS_XATTR_FL) { ret = ocfs2_xattr_attach_refcount_tree(inode, di_bh, &ref_tree->rf_ci, @@ -3858,6 +3862,49 @@ out: return ret; } +static int ocfs2_duplicate_inline_data(struct inode *s_inode, + struct buffer_head *s_bh, + struct inode *t_inode, + struct buffer_head *t_bh) +{ + int ret; + handle_t *handle; + struct ocfs2_super *osb = OCFS2_SB(s_inode->i_sb); + struct ocfs2_dinode *s_di = (struct ocfs2_dinode *)s_bh->b_data; + struct ocfs2_dinode *t_di = (struct ocfs2_dinode *)t_bh->b_data; + + BUG_ON(!(OCFS2_I(s_inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL)); + + handle = ocfs2_start_trans(osb, OCFS2_INODE_UPDATE_CREDITS); + if (IS_ERR(handle)) { + ret = PTR_ERR(handle); + mlog_errno(ret); + goto out; + } + + ret = ocfs2_journal_access_di(handle, INODE_CACHE(t_inode), t_bh, + OCFS2_JOURNAL_ACCESS_WRITE); + if (ret) { + mlog_errno(ret); + goto out_commit; + } + + t_di->id2.i_data.id_count = s_di->id2.i_data.id_count; + memcpy(t_di->id2.i_data.id_data, s_di->id2.i_data.id_data, + le16_to_cpu(s_di->id2.i_data.id_count)); + spin_lock(&OCFS2_I(t_inode)->ip_lock); + OCFS2_I(t_inode)->ip_dyn_features |= OCFS2_INLINE_DATA_FL; + t_di->i_dyn_features = cpu_to_le16(OCFS2_I(t_inode)->ip_dyn_features); + spin_unlock(&OCFS2_I(t_inode)->ip_lock); + + ocfs2_journal_dirty(handle, t_bh); + +out_commit: + ocfs2_commit_trans(osb, handle); +out: + return ret; +} + static int ocfs2_duplicate_extent_list(struct inode *s_inode, struct inode *t_inode, struct buffer_head *t_bh, @@ -3997,6 +4044,14 @@ static int ocfs2_create_reflink_node(struct inode *s_inode, goto out; } + if (OCFS2_I(s_inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) { + ret = ocfs2_duplicate_inline_data(s_inode, s_bh, + t_inode, t_bh); + if (ret) + mlog_errno(ret); + goto out; + } + ret = ocfs2_lock_refcount_tree(osb, le64_to_cpu(di->i_refcount_loc), 1, &ref_tree, &ref_root_bh); if (ret) { -- GitLab From 55888dfb6ba7e318bb3d6a44d25009906206bf6a Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Wed, 28 Oct 2009 08:59:47 +0000 Subject: [PATCH 0285/1165] AF_RAW: Augment raw_send_hdrinc to expand skb to fit iphdr->ihl (v2) Augment raw_send_hdrinc to correct for incorrect ip header length values A series of oopses was reported to me recently. Apparently when using AF_RAW sockets to send data to peers that were reachable via ipsec encapsulation, people could panic or BUG halt their systems. I've tracked the problem down to user space sending an invalid ip header over an AF_RAW socket with IP_HDRINCL set to 1. Basically what happens is that userspace sends down an ip frame that includes only the header (no data), but sets the ip header ihl value to a large number, one that is larger than the total amount of data passed to the sendmsg call. In raw_send_hdrincl, we allocate an skb based on the size of the data in the msghdr that was passed in, but assume the data is all valid. Later during ipsec encapsulation, xfrm4_tranport_output moves the entire frame back in the skbuff to provide headroom for the ipsec headers. During this operation, the skb->transport_header is repointed to a spot computed by skb->network_header + the ip header length (ihl). Since so little data was passed in relative to the value of ihl provided by the raw socket, we point transport header to an unknown location, resulting in various crashes. This fix for this is pretty straightforward, simply validate the value of of iph->ihl when sending over a raw socket. If (iph->ihl*4U) > user data buffer size, drop the frame and return -EINVAL. I just confirmed this fixes the reported crashes. Signed-off-by: Neil Horman Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/raw.c | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 757c9171e7c..ab996f9c0fe 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -352,13 +352,24 @@ static int raw_send_hdrinc(struct sock *sk, void *from, size_t length, skb->ip_summed = CHECKSUM_NONE; skb->transport_header = skb->network_header; - err = memcpy_fromiovecend((void *)iph, from, 0, length); - if (err) - goto error_fault; + err = -EFAULT; + if (memcpy_fromiovecend((void *)iph, from, 0, length)) + goto error_free; - /* We don't modify invalid header */ iphlen = iph->ihl * 4; - if (iphlen >= sizeof(*iph) && iphlen <= length) { + + /* + * We don't want to modify the ip header, but we do need to + * be sure that it won't cause problems later along the network + * stack. Specifically we want to make sure that iph->ihl is a + * sane value. If ihl points beyond the length of the buffer passed + * in, reject the frame as invalid + */ + err = -EINVAL; + if (iphlen > length) + goto error_free; + + if (iphlen >= sizeof(*iph)) { if (!iph->saddr) iph->saddr = rt->rt_src; iph->check = 0; @@ -381,8 +392,7 @@ static int raw_send_hdrinc(struct sock *sk, void *from, size_t length, out: return 0; -error_fault: - err = -EFAULT; +error_free: kfree_skb(skb); error: IP_INC_STATS(net, IPSTATS_MIB_OUTDISCARDS); -- GitLab From 6d190c6edf42a572485cf1b6c7479bfc42753084 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Wed, 28 Oct 2009 08:39:20 +0000 Subject: [PATCH 0286/1165] qlge: Fix EEH handling. Clean up driver resources without touch the hardware. Add pci save/restore state. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qlge/qlge_main.c | 78 ++++++++++++++++++++++++------------ 1 file changed, 52 insertions(+), 26 deletions(-) diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index 48b45df85ec..cea7531f4f4 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -3916,6 +3916,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } + pci_save_state(pdev); qdev->reg_base = ioremap_nocache(pci_resource_start(pdev, 1), pci_resource_len(pdev, 1)); @@ -4070,6 +4071,33 @@ static void __devexit qlge_remove(struct pci_dev *pdev) free_netdev(ndev); } +/* Clean up resources without touching hardware. */ +static void ql_eeh_close(struct net_device *ndev) +{ + int i; + struct ql_adapter *qdev = netdev_priv(ndev); + + if (netif_carrier_ok(ndev)) { + netif_carrier_off(ndev); + netif_stop_queue(ndev); + } + + if (test_bit(QL_ADAPTER_UP, &qdev->flags)) + cancel_delayed_work_sync(&qdev->asic_reset_work); + cancel_delayed_work_sync(&qdev->mpi_reset_work); + cancel_delayed_work_sync(&qdev->mpi_work); + cancel_delayed_work_sync(&qdev->mpi_idc_work); + cancel_delayed_work_sync(&qdev->mpi_port_cfg_work); + + for (i = 0; i < qdev->rss_ring_count; i++) + netif_napi_del(&qdev->rx_ring[i].napi); + + clear_bit(QL_ADAPTER_UP, &qdev->flags); + ql_tx_ring_clean(qdev); + ql_free_rx_buffers(qdev); + ql_release_adapter_resources(qdev); +} + /* * This callback is called by the PCI subsystem whenever * a PCI bus error is detected. @@ -4078,17 +4106,21 @@ static pci_ers_result_t qlge_io_error_detected(struct pci_dev *pdev, enum pci_channel_state state) { struct net_device *ndev = pci_get_drvdata(pdev); - struct ql_adapter *qdev = netdev_priv(ndev); - - netif_device_detach(ndev); - if (state == pci_channel_io_perm_failure) + switch (state) { + case pci_channel_io_normal: + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + netif_device_detach(ndev); + if (netif_running(ndev)) + ql_eeh_close(ndev); + pci_disable_device(pdev); + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + dev_err(&pdev->dev, + "%s: pci_channel_io_perm_failure.\n", __func__); return PCI_ERS_RESULT_DISCONNECT; - - if (netif_running(ndev)) - ql_adapter_down(qdev); - - pci_disable_device(pdev); + } /* Request a slot reset. */ return PCI_ERS_RESULT_NEED_RESET; @@ -4105,25 +4137,15 @@ static pci_ers_result_t qlge_io_slot_reset(struct pci_dev *pdev) struct net_device *ndev = pci_get_drvdata(pdev); struct ql_adapter *qdev = netdev_priv(ndev); + pdev->error_state = pci_channel_io_normal; + + pci_restore_state(pdev); if (pci_enable_device(pdev)) { QPRINTK(qdev, IFUP, ERR, "Cannot re-enable PCI device after reset.\n"); return PCI_ERS_RESULT_DISCONNECT; } - pci_set_master(pdev); - - netif_carrier_off(ndev); - ql_adapter_reset(qdev); - - /* Make sure the EEPROM is good */ - memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len); - - if (!is_valid_ether_addr(ndev->perm_addr)) { - QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n"); - return PCI_ERS_RESULT_DISCONNECT; - } - return PCI_ERS_RESULT_RECOVERED; } @@ -4131,17 +4153,21 @@ static void qlge_io_resume(struct pci_dev *pdev) { struct net_device *ndev = pci_get_drvdata(pdev); struct ql_adapter *qdev = netdev_priv(ndev); + int err = 0; - pci_set_master(pdev); - + if (ql_adapter_reset(qdev)) + QPRINTK(qdev, DRV, ERR, "reset FAILED!\n"); if (netif_running(ndev)) { - if (ql_adapter_up(qdev)) { + err = qlge_open(ndev); + if (err) { QPRINTK(qdev, IFUP, ERR, "Device initialization failed after reset.\n"); return; } + } else { + QPRINTK(qdev, IFUP, ERR, + "Device was not running prior to EEH.\n"); } - netif_device_attach(ndev); } -- GitLab From da03945140a035a2962f7f93e359085596f20499 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Wed, 28 Oct 2009 08:39:21 +0000 Subject: [PATCH 0287/1165] qlge: Fix firmware mailbox command timeout. The mailbox command process would only process a maximum of 5 unrelated firmware events while waiting for it's command completion status. It should process an unlimited number of events while waiting for a maximum of 5 seconds. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qlge/qlge.h | 1 + drivers/net/qlge/qlge_mpi.c | 23 ++++++++++++----------- 2 files changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h index e7285f01bd0..c2383adcd52 100644 --- a/drivers/net/qlge/qlge.h +++ b/drivers/net/qlge/qlge.h @@ -95,6 +95,7 @@ enum { /* Misc. stuff */ MAILBOX_COUNT = 16, + MAILBOX_TIMEOUT = 5, PROC_ADDR_RDY = (1 << 31), PROC_ADDR_R = (1 << 30), diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index 99e58e3f8e2..bcf13c96f73 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -470,7 +470,8 @@ end: */ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) { - int status, count; + int status; + unsigned long count; /* Begin polled mode for MPI */ @@ -491,9 +492,9 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) /* Wait for the command to complete. We loop * here because some AEN might arrive while * we're waiting for the mailbox command to - * complete. If more than 5 arrive then we can + * complete. If more than 5 seconds expire we can * assume something is wrong. */ - count = 5; + count = jiffies + HZ * MAILBOX_TIMEOUT; do { /* Wait for the interrupt to come in. */ status = ql_wait_mbx_cmd_cmplt(qdev); @@ -517,15 +518,15 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) MB_CMD_STS_GOOD) || ((mbcp->mbox_out[0] & 0x0000f000) == MB_CMD_STS_INTRMDT)) - break; - } while (--count); + goto done; + } while (time_before(jiffies, count)); - if (!count) { - QPRINTK(qdev, DRV, ERR, - "Timed out waiting for mailbox complete.\n"); - status = -ETIMEDOUT; - goto end; - } + QPRINTK(qdev, DRV, ERR, + "Timed out waiting for mailbox complete.\n"); + status = -ETIMEDOUT; + goto end; + +done: /* Now we can clear the interrupt condition * and look at our status. -- GitLab From 06b71b657b03c33b8d919da29f33d326f1471b39 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 28 Oct 2009 05:34:21 +0000 Subject: [PATCH 0288/1165] netdev: usb: dm9601.c can drive a device not supported yet, add support for it I found that the current version of drivers/net/usb/dm9601.c can be used to successfully drive a low-power, low-cost network adapter with USB ID 0a46:9000, based on a DM9000E chipset. As no device with this ID is yet present in the kernel, I have created a patch that adds support for the device to the dm9601 driver. Created and tested against linux-2.6.32-rc5. Signed-off-by: Janusz Krzysztofik Acked-by: Peter Korsgaard Signed-off-by: David S. Miller --- drivers/net/usb/dm9601.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c index 72470f77f55..a2b30a10064 100644 --- a/drivers/net/usb/dm9601.c +++ b/drivers/net/usb/dm9601.c @@ -649,6 +649,10 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0fe6, 0x8101), /* DM9601 USB to Fast Ethernet Adapter */ .driver_info = (unsigned long)&dm9601_info, }, + { + USB_DEVICE(0x0a46, 0x9000), /* DM9000E */ + .driver_info = (unsigned long)&dm9601_info, + }, {}, // END }; -- GitLab From b5dd884e682cae6b8c037f9d11f3b623b4cf2011 Mon Sep 17 00:00:00 2001 From: Gabor Gombas Date: Thu, 29 Oct 2009 03:19:11 -0700 Subject: [PATCH 0289/1165] net: Fix 'Re: PACKET_TX_RING: packet size is too long' Currently PACKET_TX_RING forces certain amount of every frame to remain unused. This probably originates from an early version of the PACKET_TX_RING patch that in fact used the extra space when the (since removed) CONFIG_PACKET_MMAP_ZERO_COPY option was enabled. The current code does not make any use of this extra space. This patch removes the extra space reservation and lets userspace make use of the full frame size. Signed-off-by: Gabor Gombas Signed-off-by: David S. Miller --- net/packet/af_packet.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 1238949e66a..48b18dad676 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -982,10 +982,7 @@ static int tpacket_snd(struct packet_sock *po, struct msghdr *msg) goto out_put; size_max = po->tx_ring.frame_size - - sizeof(struct skb_shared_info) - - po->tp_hdrlen - - LL_ALLOCATED_SPACE(dev) - - sizeof(struct sockaddr_ll); + - (po->tp_hdrlen - sizeof(struct sockaddr_ll)); if (size_max > dev->mtu + reserve) size_max = dev->mtu + reserve; -- GitLab From 592b09a42fc3ae6737a0f3ecf4fee42ecd0296f8 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 29 Oct 2009 11:46:12 +0100 Subject: [PATCH 0290/1165] backing-dev: ensure that a removed bdi no longer has super_block referencing it When the bdi is being removed, we have to ensure that no super_blocks currently have that cached in sb->s_bdi. Normally this is ensured by the sb having a longer life span than the bdi, but if the device is suddenly yanked, we have to kill this reference. sb->s_bdi is pointed to freed memory at that point. This fixes a problem with sync(1) hanging when a USB stick is pulled without cleanly umounting it first. Reported-by: Pavel Machek Signed-off-by: Jens Axboe --- mm/backing-dev.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 5a37e205571..1065b715ef6 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -610,6 +610,21 @@ static void bdi_wb_shutdown(struct backing_dev_info *bdi) kthread_stop(wb->task); } +/* + * This bdi is going away now, make sure that no super_blocks point to it + */ +static void bdi_prune_sb(struct backing_dev_info *bdi) +{ + struct super_block *sb; + + spin_lock(&sb_lock); + list_for_each_entry(sb, &super_blocks, s_list) { + if (sb->s_bdi == bdi) + sb->s_bdi = NULL; + } + spin_unlock(&sb_lock); +} + void bdi_unregister(struct backing_dev_info *bdi) { if (bdi->dev) { @@ -682,6 +697,7 @@ void bdi_destroy(struct backing_dev_info *bdi) spin_unlock(&inode_lock); } + bdi_prune_sb(bdi); bdi_unregister(bdi); for (i = 0; i < NR_BDI_STAT_ITEMS; i++) -- GitLab From 3f0b3c33eeed400577b47fab8439ffe6f40aa97a Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Thu, 29 Oct 2009 15:04:07 +0100 Subject: [PATCH 0291/1165] [S390] call home: fix local buffer usage in proc handler Fix the size of the local buffer and use snprintf to prevent further miscalculations. Also fix the usage of bitwise vs logic operations. Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_async.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/s390/char/sclp_async.c b/drivers/s390/char/sclp_async.c index a4f68e5b9c9..bf4a9f455d8 100644 --- a/drivers/s390/char/sclp_async.c +++ b/drivers/s390/char/sclp_async.c @@ -68,15 +68,14 @@ static int proc_handler_callhome(struct ctl_table *ctl, int write, { unsigned long val; int len, rc; - char buf[2]; + char buf[3]; - if (!*count | (*ppos && !write)) { + if (!*count || (*ppos && !write)) { *count = 0; return 0; } if (!write) { - len = sprintf(buf, "%d\n", callhome_enabled); - buf[len] = '\0'; + len = snprintf(buf, sizeof(buf), "%d\n", callhome_enabled); rc = copy_to_user(buffer, buf, sizeof(buf)); if (rc != 0) return -EFAULT; -- GitLab From 8ca45667f966968132c772ddbb6468b41a817c19 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 29 Oct 2009 15:04:08 +0100 Subject: [PATCH 0292/1165] [S390] s/r: cmm resume fix If a suspended z/VM guest has been logged off before the resume the 'SET SMSG IUCV' CP command need to be repeated to reenable sending message via SMSG. This fixes the following error: HCPMFS057I H4214002 not receiving; SMSG off Error: non-zero CP response for command 'SMSG H4214002 CMM SHRINK 5010': #57 Signed-off-by: Martin Schwidefsky Signed-off-by: Martin Schwidefsky --- drivers/s390/net/smsgiucv.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/smsgiucv.c b/drivers/s390/net/smsgiucv.c index 102000d1af6..3012355f830 100644 --- a/drivers/s390/net/smsgiucv.c +++ b/drivers/s390/net/smsgiucv.c @@ -158,7 +158,12 @@ static int smsg_pm_restore_thaw(struct device *dev) smsg_path->flags = 0; rc = iucv_path_connect(smsg_path, &smsg_handler, "*MSG ", NULL, NULL, NULL); - printk(KERN_ERR "iucv_path_connect returned with rc %i\n", rc); +#ifdef CONFIG_PM_DEBUG + if (rc) + printk(KERN_ERR + "iucv_path_connect returned with rc %i\n", rc); +#endif + cpcmd("SET SMSG IUCV", NULL, 0, NULL); } return 0; } -- GitLab From 4f8048ee734dab7c463574797b820c0c68c80791 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Oct 2009 15:04:09 +0100 Subject: [PATCH 0293/1165] [S390] smp: fix prefix handling of offlined cpus Offlined cpus still have valid prefix register contents. Dumpers will store the register contents of a cpu to the location where its prefix register points to. For offlined cpus the area (lowcore) has been freed and the dumper would write the uninteresting contents of the offline cpu to a memory location which might be in use by some other component and destroy valueable information. To fix this set the prefix register of offline cpus to absolute address zero again. This prevents the current dumpers to write to random memory locations. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index c932caa5e85..c699ac538c4 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -638,6 +638,8 @@ void __cpu_die(unsigned int cpu) /* Wait until target cpu is down */ while (!cpu_stopped(cpu)) cpu_relax(); + while (signal_processor_p(0, cpu, sigp_set_prefix) == sigp_busy) + udelay(10); smp_free_lowcore(cpu); pr_info("Processor %d stopped\n", cpu); } -- GitLab From 4a0fb4c44573759f878fc65f6ddbd46080748f8b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Oct 2009 15:04:10 +0100 Subject: [PATCH 0294/1165] [S390] call home: fix error handling in init function Fix missing unregister_sysctl_table in case the SCLP doesn't provide the requested feature. Also simplify the whole error handling while at it. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_async.c | 28 ++++++++++------------------ 1 file changed, 10 insertions(+), 18 deletions(-) diff --git a/drivers/s390/char/sclp_async.c b/drivers/s390/char/sclp_async.c index bf4a9f455d8..3c20aa13118 100644 --- a/drivers/s390/char/sclp_async.c +++ b/drivers/s390/char/sclp_async.c @@ -170,39 +170,31 @@ static int __init sclp_async_init(void) rc = sclp_register(&sclp_async_register); if (rc) return rc; - callhome_sysctl_header = register_sysctl_table(kern_dir_table); - if (!callhome_sysctl_header) { - rc = -ENOMEM; - goto out_sclp; - } - if (!(sclp_async_register.sclp_receive_mask & EVTYP_ASYNC_MASK)) { - rc = -EOPNOTSUPP; + rc = -EOPNOTSUPP; + if (!(sclp_async_register.sclp_receive_mask & EVTYP_ASYNC_MASK)) goto out_sclp; - } rc = -ENOMEM; + callhome_sysctl_header = register_sysctl_table(kern_dir_table); + if (!callhome_sysctl_header) + goto out_sclp; request = kzalloc(sizeof(struct sclp_req), GFP_KERNEL); - if (!request) - goto out_sys; sccb = (struct sclp_async_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA); - if (!sccb) + if (!request || !sccb) goto out_mem; - rc = atomic_notifier_chain_register(&panic_notifier_list, - &call_home_panic_nb); + rc = atomic_notifier_chain_register(&panic_notifier_list, + &call_home_panic_nb); if (rc) goto out_mem; - strncpy(nodename, init_utsname()->nodename, 64); - return 0; - + goto out; out_mem: kfree(request); free_page((unsigned long) sccb); -out_sys: unregister_sysctl_table(callhome_sysctl_header); out_sclp: sclp_unregister(&sclp_async_register); +out: return rc; - } module_init(sclp_async_init); -- GitLab From e8a79c9ec779168502402a8b834abf8cf38a325a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Oct 2009 15:04:11 +0100 Subject: [PATCH 0295/1165] [S390] call home: fix string length handling After copying uts->nodename to the static nodename array the static version isn't necessarily zero termininated, since the size of the array is one byte too short. Afterwards doing strncat(data, nodename, strlen(nodename)); may copy an arbitrary large amount of bytes. Fix this by getting rid of the static array and using strncat with proper length limit. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_async.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/s390/char/sclp_async.c b/drivers/s390/char/sclp_async.c index 3c20aa13118..b44462a6c6d 100644 --- a/drivers/s390/char/sclp_async.c +++ b/drivers/s390/char/sclp_async.c @@ -26,7 +26,6 @@ static struct sclp_async_sccb *sccb; static int sclp_async_send_wait(char *message); static struct ctl_table_header *callhome_sysctl_header; static DEFINE_SPINLOCK(sclp_async_lock); -static char nodename[64]; #define SCLP_NORMAL_WRITE 0x00 struct async_evbuf { @@ -52,9 +51,10 @@ static struct sclp_register sclp_async_register = { static int call_home_on_panic(struct notifier_block *self, unsigned long event, void *data) { - strncat(data, nodename, strlen(nodename)); - sclp_async_send_wait(data); - return NOTIFY_DONE; + strncat(data, init_utsname()->nodename, + sizeof(init_utsname()->nodename)); + sclp_async_send_wait(data); + return NOTIFY_DONE; } static struct notifier_block call_home_panic_nb = { @@ -183,10 +183,8 @@ static int __init sclp_async_init(void) goto out_mem; rc = atomic_notifier_chain_register(&panic_notifier_list, &call_home_panic_nb); - if (rc) - goto out_mem; - strncpy(nodename, init_utsname()->nodename, 64); - goto out; + if (!rc) + goto out; out_mem: kfree(request); free_page((unsigned long) sccb); -- GitLab From 70f5dc514c0b183ee813dc3b3983b04891fd1e7a Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 29 Oct 2009 15:04:12 +0100 Subject: [PATCH 0296/1165] [S390] cputime: fix overflow on 31 bit systems The cputime_to_msecs / cputime_to_clock_t and cputime64_to_clock_t cause fixpoint divide exceptions if the cputime is too large. On a machine that collected 49.7 days worth of idle time reading from /proc/stat will generate oopses like this: Kernel BUG at 001b0c92 [verbose debug info unavailable] fixpoint divide exception: 0009 [#13] SMP Modules linked in: ipv6 CPU: 1 Tainted: G D 2.6.27.10 #5 Process cat (pid: 21352, task: 1fb34138, ksp: 1d2a3d98) Krnl PSW : 070c2000 801b0c92 (show_stat+0x2ca/0x68c) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 Krnl GPRS: 00000001 00001388 00000bb8 0015d2a1 00000000 00000000 000003e8 0001fd91 00000000 00000000 0000129d eecd2ff0 1cc533b9 0036f780 801b0bce 1d2a3cc0 Krnl Code: 801b0c86: f18890abf198 mvo 171(9,%r9),408(9,%r15) 801b0c8c: 98abf170 lm %r10,%r11,368(%r15) 801b0c90: 1da1 dr %r10,%r1 >801b0c92: 90abf170 stm %r10,%r11,368(%r15) 801b0c96: 98abf190 lm %r10,%r11,400(%r15) 801b0c9a: 1da1 dr %r10,%r1 801b0c9c: 90abf190 stm %r10,%r11,400(%r15) 801b0ca0: 18a3 lr %r10,%r3 Call Trace: ([<00000000001b09f4>] show_stat+0x2c/0x68c) [<000000000018dcee>] seq_read+0xb2/0x364 [<00000000001a9980>] proc_reg_read+0x68/0x98 [<00000000001705ee>] vfs_read+0x6e/0xe8 [<0000000000170732>] sys_read+0x36/0x78 [<000000000010f750>] sysc_do_restart+0x12/0x16 [<0000000077f3ad6a>] 0x77f3ad6a <4>---[ end trace 1436ea9559d3de9e ]--- Reported-by: Mike Frysinger Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/cputime.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index 24b1244aadb..f23961ada7f 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -78,7 +78,7 @@ cputime64_to_jiffies64(cputime64_t cputime) static inline unsigned int cputime_to_msecs(const cputime_t cputime) { - return __div(cputime, 4096000); + return cputime_div(cputime, 4096000); } static inline cputime_t @@ -160,7 +160,7 @@ cputime_to_timeval(const cputime_t cputime, struct timeval *value) static inline clock_t cputime_to_clock_t(cputime_t cputime) { - return __div(cputime, 4096000000ULL / USER_HZ); + return cputime_div(cputime, 4096000000ULL / USER_HZ); } static inline cputime_t @@ -175,7 +175,7 @@ clock_t_to_cputime(unsigned long x) static inline clock_t cputime64_to_clock_t(cputime64_t cputime) { - return __div(cputime, 4096000000ULL / USER_HZ); + return cputime_div(cputime, 4096000000ULL / USER_HZ); } struct s390_idle_data { -- GitLab From f8501ba77d69c88a65e4ebbe03bdc65b1edb0b86 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Oct 2009 15:04:13 +0100 Subject: [PATCH 0297/1165] [S390] smp: fix sigp stop handling According to the architecture a cpu must not necessarily enter stopped state after completion of a sigp instruction with "stop" order code. So remove the BUG() statement after self sending sigp stop to avoid that it ever gets reached. Also add a sigp busy check to make sure that the order gets delivered. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ipl.c | 7 +++---- arch/s390/kernel/smp.c | 4 ++-- arch/s390/kernel/swsusp_asm64.S | 1 + 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index ee57a42e6e9..4890ac6d7fa 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -1595,10 +1595,9 @@ static void stop_run(struct shutdown_trigger *trigger) { if (strcmp(trigger->name, ON_PANIC_STR) == 0) disabled_wait((unsigned long) __builtin_return_address(0)); - else { - signal_processor(smp_processor_id(), sigp_stop); - for (;;); - } + while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy) + cpu_relax(); + for (;;); } static struct shutdown_action stop_action = {SHUTDOWN_ACTION_STOP_STR, diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index c699ac538c4..c99c45b848e 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -647,8 +647,8 @@ void __cpu_die(unsigned int cpu) void cpu_die(void) { idle_task_exit(); - signal_processor(smp_processor_id(), sigp_stop); - BUG(); + while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy) + cpu_relax(); for (;;); } diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S index 7c8653e27db..0f4ef3b856d 100644 --- a/arch/s390/kernel/swsusp_asm64.S +++ b/arch/s390/kernel/swsusp_asm64.S @@ -199,6 +199,7 @@ pgm_check_entry: brc 2,4b /* busy, try again */ 5: sigp %r9,%r2,__SIGP_STOP /* stop resume (current) CPU */ + brc 2,5b /* busy, try again */ 6: j 6b restart_suspend: -- GitLab From b3dcf3de8e4d71d79235fc67b6c5def6506c27f8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Oct 2009 15:04:14 +0100 Subject: [PATCH 0298/1165] [S390] smp: fix sigp sense handling sigp sense only returns the status of a cpu if it is non zero. If the status of the sensed cpu is all zeros condition code 0 (accpeted) is set and no status bits are returned. The current code however assumes that a status was returned and tests bits in it. This means uninitalized data is accessed with random results. Worst case is that the code that checks if cpu is offline on cpu hotplug assumes that the target cpu is offline while it is still running. This leads potentially to memory corruption since resources that are still needed by the target cpu will be freed and could be resused while still in use. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 1 - arch/s390/kernel/swsusp_asm64.S | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index c99c45b848e..93e52039321 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -76,7 +76,6 @@ static int cpu_stopped(int cpu) __u32 status; switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) { - case sigp_order_code_accepted: case sigp_status_stored: /* Check for stopped and check stop state */ if (status & 0x50) diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S index 0f4ef3b856d..0c26cc1898e 100644 --- a/arch/s390/kernel/swsusp_asm64.S +++ b/arch/s390/kernel/swsusp_asm64.S @@ -207,6 +207,7 @@ restart_suspend: llgh %r2,0(%r1) 7: sigp %r9,%r2,__SIGP_SENSE /* Wait for resume CPU */ + brc 8,7b /* accepted, status 0, still running */ brc 2,7b /* busy, try again */ tmll %r9,0x40 /* Test if resume CPU is stopped */ jz 7b -- GitLab From 2eca40a8ccd4160dbfaa5cbd61038d921d0e5f13 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 26 Oct 2009 16:49:29 -0700 Subject: [PATCH 0299/1165] cpufreq: add cpufreq_get() stub for CONFIG_CPU_FREQ=n When CONFIG_CPU_FREQ is disabled, cpufreq_get() needs a stub. Used by kvm (although it looks like a bit of the kvm code could be omitted when CONFIG_CPU_FREQ is disabled). arch/x86/built-in.o: In function `kvm_arch_init': (.text+0x10de7): undefined reference to `cpufreq_get' (Needed in linux-next's KVM tree, but it's correct in 2.6.32). Signed-off-by: Randy Dunlap Tested-by: Eric Paris Cc: Jiri Slaby Cc: Avi Kivity Cc: Marcelo Tosatti Cc: Dave Jones Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/cpufreq.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 44717eb4763..79a2340d83c 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -291,8 +291,15 @@ struct global_attr { int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu); int cpufreq_update_policy(unsigned int cpu); +#ifdef CONFIG_CPU_FREQ /* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */ unsigned int cpufreq_get(unsigned int cpu); +#else +static inline unsigned int cpufreq_get(unsigned int cpu) +{ + return 0; +} +#endif /* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */ #ifdef CONFIG_CPU_FREQ -- GitLab From 92f7ba70eecf4da8264a767b181cc2090f62d4ad Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 26 Oct 2009 16:49:31 -0700 Subject: [PATCH 0300/1165] hwpoison: fix oops on ksm pages Memory failure on a KSM page currently oopses on its NULL anon_vma in page_lock_anon_vma(): that may not be much worse than the consequence of ignoring it, but it is better to be consistent with how ZERO_PAGE and hugetlb pages and other awkward cases are treated. Just skip it. We could fix it for 2.6.32 at the KSM end, by putting a dummy anon_vma pointer in there; but that would get harder next time, when KSM will put a pointer to something else there (and I'm not currently planning to do any work to open that up to memory_failure). So I would prefer this simple PageKsm test, until the other exceptions are handled. Signed-off-by: Hugh Dickins Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 729d4b15b64..7fc2130d273 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include #include @@ -661,7 +662,7 @@ static void hwpoison_user_mappings(struct page *p, unsigned long pfn, int i; int kill = 1; - if (PageReserved(p) || PageCompound(p) || PageSlab(p)) + if (PageReserved(p) || PageCompound(p) || PageSlab(p) || PageKsm(p)) return; if (!PageLRU(p)) -- GitLab From 370c28def65b3a5765192753a164403619b41d01 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 26 Oct 2009 16:49:32 -0700 Subject: [PATCH 0301/1165] hwpoison: fix/proc/meminfo alignment Given such a long name, the kB count in /proc/meminfo's HardwareCorrupted line is being shown too far right (it does align with x86_64's VmallocChunk above, but I hope nobody will ever have that much corrupted!). Align it. Signed-off-by: Hugh Dickins Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/meminfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c index c7bff4f603f..a65239cfd97 100644 --- a/fs/proc/meminfo.c +++ b/fs/proc/meminfo.c @@ -99,7 +99,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v) "VmallocUsed: %8lu kB\n" "VmallocChunk: %8lu kB\n" #ifdef CONFIG_MEMORY_FAILURE - "HardwareCorrupted: %8lu kB\n" + "HardwareCorrupted: %5lu kB\n" #endif , K(i.totalram), -- GitLab From 0d0df599f1f11f12d589318bacb59a50fb5c0310 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 26 Oct 2009 16:49:34 -0700 Subject: [PATCH 0302/1165] connector: fix regression introduced by sid connector Since commit 02b51df1b07b4e9ca823c89284e704cadb323cd1 (proc connector: add event for process becoming session leader) we have the following warning: Badness at kernel/softirq.c:143 [...] Krnl PSW : 0404c00180000000 00000000001481d4 (local_bh_enable+0xb0/0xe0) [...] Call Trace: ([<000000013fe04100>] 0x13fe04100) [<000000000048a946>] sk_filter+0x9a/0xd0 [<000000000049d938>] netlink_broadcast+0x2c0/0x53c [<00000000003ba9ae>] cn_netlink_send+0x272/0x2b0 [<00000000003baef0>] proc_sid_connector+0xc4/0xd4 [<0000000000142604>] __set_special_pids+0x58/0x90 [<0000000000159938>] sys_setsid+0xb4/0xd8 [<00000000001187fe>] sysc_noemu+0x10/0x16 [<00000041616cb266>] 0x41616cb266 The warning is ---> WARN_ON_ONCE(in_irq() || irqs_disabled()); The network code must not be called with disabled interrupts but sys_setsid holds the tasklist_lock with spinlock_irq while calling the connector. After a discussion we agreed that we can move proc_sid_connector from __set_special_pids to sys_setsid. We also agreed that it is sufficient to change the check from task_session(curr) != pid into err > 0, since if we don't change the session, this means we were already the leader and return -EPERM. One last thing: There is also daemonize(), and some people might want to get a notification in that case. Since daemonize() is only needed if a user space does kernel_thread this does not look important (and there seems to be no consensus if this connector should be called in daemonize). If we really want this, we can add proc_sid_connector to daemonize() in an additional patch (Scott?) Signed-off-by: Christian Borntraeger Cc: Scott James Remnant Cc: Matt Helsley Cc: David S. Miller Acked-by: Oleg Nesterov Acked-by: Evgeniy Polyakov Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/exit.c | 4 +--- kernel/sys.c | 2 ++ 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/exit.c b/kernel/exit.c index e61891f8012..f7864ac2ecc 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -359,10 +359,8 @@ void __set_special_pids(struct pid *pid) { struct task_struct *curr = current->group_leader; - if (task_session(curr) != pid) { + if (task_session(curr) != pid) change_pid(curr, PIDTYPE_SID, pid); - proc_sid_connector(curr); - } if (task_pgrp(curr) != pid) change_pid(curr, PIDTYPE_PGID, pid); diff --git a/kernel/sys.c b/kernel/sys.c index 255475d163e..1828f8d1084 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1110,6 +1110,8 @@ SYSCALL_DEFINE0(setsid) err = session; out: write_unlock_irq(&tasklist_lock); + if (err > 0) + proc_sid_connector(group_leader); return err; } -- GitLab From 58355c7876a0754377c37c8af948b4cd423410e2 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 26 Oct 2009 16:49:35 -0700 Subject: [PATCH 0303/1165] congestion_wait(): don't use WRITE commit 8aa7e847d (Fix congestion_wait() sync/async vs read/write confusion) replace WRITE with BLK_RW_ASYNC. Unfortunately, concurrent mm development made the unchanged place accidentally. This patch fixes it too. Signed-off-by: KOSAKI Motohiro Acked-by: Jens Axboe Acked-by: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 64e43889883..fbb9f6bdad6 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1088,7 +1088,7 @@ static unsigned long shrink_inactive_list(unsigned long max_scan, int lumpy_reclaim = 0; while (unlikely(too_many_isolated(zone, file, sc))) { - congestion_wait(WRITE, HZ/10); + congestion_wait(BLK_RW_ASYNC, HZ/10); /* We are about to die and free our memory. Return now. */ if (fatal_signal_pending(current)) -- GitLab From 478988d3b28e98a31e0cfe24e011e28ba0f3cf0d Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 26 Oct 2009 16:49:36 -0700 Subject: [PATCH 0304/1165] cgroup: fix strstrip() misuse cgroup_write_X64() and cgroup_write_string() ignore the return value of strstrip(). it makes small inconsistent behavior. example: ========================= # cd /mnt/cgroup/hoge # cat memory.swappiness 60 # echo "59 " > memory.swappiness # cat memory.swappiness 59 # echo " 58" > memory.swappiness bash: echo: write error: Invalid argument This patch fixes it. Cc: Li Zefan Acked-by: Paul Menage Signed-off-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cgroup.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index ca83b73fba1..0249f4be9b5 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -1710,14 +1710,13 @@ static ssize_t cgroup_write_X64(struct cgroup *cgrp, struct cftype *cft, return -EFAULT; buffer[nbytes] = 0; /* nul-terminate */ - strstrip(buffer); if (cft->write_u64) { - u64 val = simple_strtoull(buffer, &end, 0); + u64 val = simple_strtoull(strstrip(buffer), &end, 0); if (*end) return -EINVAL; retval = cft->write_u64(cgrp, cft, val); } else { - s64 val = simple_strtoll(buffer, &end, 0); + s64 val = simple_strtoll(strstrip(buffer), &end, 0); if (*end) return -EINVAL; retval = cft->write_s64(cgrp, cft, val); @@ -1753,8 +1752,7 @@ static ssize_t cgroup_write_string(struct cgroup *cgrp, struct cftype *cft, } buffer[nbytes] = 0; /* nul-terminate */ - strstrip(buffer); - retval = cft->write_string(cgrp, cft, buffer); + retval = cft->write_string(cgrp, cft, strstrip(buffer)); if (!retval) retval = nbytes; out: -- GitLab From 0a1b71b4008d332e57b5605a8228ea7aa96687e8 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 26 Oct 2009 16:49:37 -0700 Subject: [PATCH 0305/1165] strstrip(): mark as as must_check strstrip() can return a modified value of its input argument, when removing elading whitesapce. So it is surely bug for this function's return value to be ignored. The caller is probably going to use the incorrect original pointer. So mark it __must_check to prevent this frm happening (as it has before). Signed-off-by: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/string.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/string.h b/include/linux/string.h index 489019ef169..b8508868d5a 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -62,7 +62,7 @@ extern char * strnchr(const char *, size_t, int); #ifndef __HAVE_ARCH_STRRCHR extern char * strrchr(const char *,int); #endif -extern char * strstrip(char *); +extern char * __must_check strstrip(char *); #ifndef __HAVE_ARCH_STRSTR extern char * strstr(const char *,const char *); #endif -- GitLab From 8753298a1192e5560e179e81aaada59c9809263e Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 26 Oct 2009 16:49:38 -0700 Subject: [PATCH 0306/1165] omap_hsmmc: add missing probe handler hook The missing probe handler hook will never probe the driver. Add it back. Fixes broken MMC on OMAP. We use platform_driver_probe() API since omap_hsmmc is not a hot-pluggable device. Signed-off-by: Roger Quadros Tested-by: Felipe Contreras Tested-by: Tony Lindgren Cc: Jiri Kosina Cc: Felipe Contreras Cc: Denis Karpov Cc: Madhusudhan Chikkature Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/omap_hsmmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 4487cc09791..0aecaaebef3 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -2013,7 +2013,7 @@ static struct platform_driver omap_hsmmc_driver = { static int __init omap_hsmmc_init(void) { /* Register the MMC driver */ - return platform_driver_register(&omap_hsmmc_driver); + return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe); } static void __exit omap_hsmmc_cleanup(void) -- GitLab From bda2562c34c338c516750b4f6e956c138115cce2 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:39 -0700 Subject: [PATCH 0307/1165] MAINTAINERS: update GENERIC UIO FOR PCI DEVICES Quote a name with a period remove L: linux-kernel@vger.kernel.org Signed-off-by: Joe Perches Cc: "Michael S. Tsirkin" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 88241154f4c..be2124b3069 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2272,9 +2272,8 @@ S: Maintained F: include/asm-generic GENERIC UIO DRIVER FOR PCI DEVICES -M: Michael S. Tsirkin +M: "Michael S. Tsirkin" L: kvm@vger.kernel.org -L: linux-kernel@vger.kernel.org S: Supported F: drivers/uio/uio_pci_generic.c -- GitLab From d6f005a108983292f191a177314c591a95fc2233 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:40 -0700 Subject: [PATCH 0308/1165] MAINTAINERS: update TRACING section Move to alphabetic position Use single line F: entries Signed-off-by: Joe Perches Cc: Steven Rostedt Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index be2124b3069..2c2ca16c436 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2202,18 +2202,6 @@ F: Documentation/filesystems/caching/ F: fs/fscache/ F: include/linux/fscache*.h -TRACING -M: Steven Rostedt -M: Frederic Weisbecker -M: Ingo Molnar -T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core -S: Maintained -F: Documentation/trace/ftrace.txt -F: arch/*/*/*/ftrace.h -F: arch/*/kernel/ftrace.c -F: include/*/ftrace.h include/trace/ include/linux/trace*.h -F: kernel/trace/ - FUJITSU FR-V (FRV) PORT M: David Howells S: Maintained @@ -5176,6 +5164,20 @@ L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained F: drivers/char/tpm/ +TRACING +M: Steven Rostedt +M: Frederic Weisbecker +M: Ingo Molnar +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core +S: Maintained +F: Documentation/trace/ftrace.txt +F: arch/*/*/*/ftrace.h +F: arch/*/kernel/ftrace.c +F: include/*/ftrace.h +F: include/linux/trace*.h +F: include/trace/ +F: kernel/trace/ + TRIVIAL PATCHES M: Jiri Kosina T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git -- GitLab From 0e24bdd49d33cc857918de8faabb7fd722410e71 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:40 -0700 Subject: [PATCH 0309/1165] MAINTAINERS: update OMAP Tony Lindgren email name Which had an embedded and duplicated email address Signed-off-by: Joe Perches Cc: Tony Lindgren Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2c2ca16c436..1cba3e9e21b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3772,7 +3772,7 @@ F: drivers/video/riva/ F: drivers/video/nvidia/ OMAP SUPPORT -M: "Tony Lindgren " +M: Tony Lindgren L: linux-omap@vger.kernel.org W: http://www.muru.com/linux/omap/ W: http://linux.omap.com/ -- GitLab From 476604de5a9d4e782523c6bb0f4894f690768c87 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:41 -0700 Subject: [PATCH 0310/1165] MAINTAINERS: change ATM mailing list to moderated Signed-off-by: Joe Perches Cc: Chas Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1cba3e9e21b..d0c16a166e4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -992,7 +992,7 @@ F: drivers/net/atlx/ ATM M: Chas Williams -L: linux-atm-general@lists.sourceforge.net (subscribers-only) +L: linux-atm-general@lists.sourceforge.net (moderated for non-subscribers) L: netdev@vger.kernel.org W: http://linux-atm.sourceforge.net S: Maintained -- GitLab From 7a241d6ecd3ffbe5aa987176fc4466250ff3ed3b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:42 -0700 Subject: [PATCH 0311/1165] MAINTAINERS: use tab not spaces after field types Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index d0c16a166e4..100b448c93a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4599,20 +4599,20 @@ S: Maintained F: drivers/mmc/host/sdricoh_cs.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER -S: Orphan -L: linux-mmc@vger.kernel.org -F: drivers/mmc/host/sdhci.* +S: Orphan +L: linux-mmc@vger.kernel.org +F: drivers/mmc/host/sdhci.* SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF) M: Anton Vorontsov L: linuxppc-dev@ozlabs.org -L: linux-mmc@vger.kernel.org +L: linux-mmc@vger.kernel.org S: Maintained -F: drivers/mmc/host/sdhci-of.* +F: drivers/mmc/host/sdhci-of.* SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER M: Ben Dooks -L: linux-mmc@vger.kernel.org +L: linux-mmc@vger.kernel.org S: Maintained F: drivers/mmc/host/sdhci-s3c.c -- GitLab From ee709b0c62bd163fd3b5aff2320e8724cd8e3d8b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:43 -0700 Subject: [PATCH 0312/1165] MAINTAINERS: update Kernel Janitors after mismerge Fix the mismerge of the W: URL and the S: status fields. Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 100b448c93a..88dffb46149 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2991,8 +2991,8 @@ F: scripts/Makefile.* KERNEL JANITORS L: kernel-janitors@vger.kernel.org -W: http://www.kerneljanitors.org/ -S: Maintained +W: http://janitor.kernelnewbies.org/ +S: Odd Fixes KERNEL NFSD, SUNRPC, AND LOCKD SERVERS M: "J. Bruce Fields" -- GitLab From a2681a75426552c185b7c594116cc44ef8302aba Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:43 -0700 Subject: [PATCH 0313/1165] MAINTAINERS: update SCORE architecture name style and add file pattern Signed-off-by: Joe Perches Cc: Chen Liqin Cc: Lennox Wu Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 88dffb46149..8ea20fc88d0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4521,12 +4521,11 @@ F: kernel/sched* F: include/linux/sched.h SCORE ARCHITECTURE -P: Chen Liqin -M: liqin.chen@sunplusct.com -P: Lennox Wu -M: lennox.wu@gmail.com +M: Chen Liqin +M: Lennox Wu W: http://www.sunplusct.com S: Supported +F: arch/score/ SCSI CDROM DRIVER M: Jens Axboe -- GitLab From 2bf822d79f81c5923bce5630d2815857b5b98a6e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:44 -0700 Subject: [PATCH 0314/1165] MAINTAINERS: SIMPLE FIRMWARE INTERFACE: update email style Signed-off-by: Joe Perches Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 8ea20fc88d0..cbea223d6bb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4714,8 +4714,7 @@ F: drivers/usb/gadget/lh7a40* F: drivers/usb/host/ohci-lh7a40* SIMPLE FIRMWARE INTERFACE (SFI) -P: Len Brown -M: lenb@kernel.org +M: Len Brown L: sfi-devel@simplefirmware.org W: http://simplefirmware.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git -- GitLab From 364e9e1887da25ce1bd682f4926f536e88b084ad Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:45 -0700 Subject: [PATCH 0315/1165] =?UTF-8?q?MAINTAINERS:=20WINBOND=20CIR=20-=20In?= =?UTF-8?q?tegrate=20P:/M:=20lines,=20fixup=20David=20H=C3=A4rdeman's=20na?= =?UTF-8?q?me?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Joe Perches Cc: David Härdeman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index cbea223d6bb..4d809fff4b2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5742,8 +5742,7 @@ S: Maintained F: drivers/scsi/wd7000.c WINBOND CIR DRIVER -P: David Härdeman -M: david@hardeman.nu +M: David Härdeman S: Maintained F: drivers/input/misc/winbond-cir.c -- GitLab From b55ef929cb0b7fc8c10651396b46286e505806c3 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:46 -0700 Subject: [PATCH 0316/1165] MAINTAINERS: fix up PERIPHERAL spelling Signed-off-by: Joe Perches Cc: Li Yang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4d809fff4b2..5ad2a7666f0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2151,7 +2151,7 @@ S: Supported F: arch/powerpc/sysdev/qe_lib/ F: arch/powerpc/include/asm/*qe.h -FREESCALE USB PERIPHERIAL DRIVERS +FREESCALE USB PERIPHERAL DRIVERS M: Li Yang L: linux-usb@vger.kernel.org L: linuxppc-dev@ozlabs.org -- GitLab From 27480ccc29c84206ad53f1990d4a22ff6236de91 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:47 -0700 Subject: [PATCH 0317/1165] MAINTAINERS: update WOLFSON MICROELECTRONICS Integrate P:/M: lines Remove L: linux-kernel@vger.kernel.org Signed-off-by: Joe Perches Cc: Mark Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5ad2a7666f0..6a3f5ab209e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5799,9 +5799,7 @@ F: drivers/input/touchscreen/*wm97* F: include/linux/wm97xx.h WOLFSON MICROELECTRONICS PMIC DRIVERS -P: Mark Brown -M: broonie@opensource.wolfsonmicro.com -L: linux-kernel@vger.kernel.org +M: Mark Brown T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus W: http://opensource.wolfsonmicro.com/node/8 S: Supported -- GitLab From dcf36a92f569b2c240129d8c6ae4c366c1658766 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:47 -0700 Subject: [PATCH 0318/1165] scripts/get_maintainer.pl: add patch/file search for keywords Based on an idea from Wolfram Sang. Add search for MAINTAINERS line "K:" regex pattern match in a patch or file Matches are added after file pattern matches Add --keywords command line switch (default 1, on) Change version to 0.21 Signed-off-by: Joe Perches Cc: Wolfram Sang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 37 +++++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index cdb44b63342..102b76608f3 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -13,7 +13,7 @@ use strict; my $P = $0; -my $V = '0.20'; +my $V = '0.21'; use Getopt::Long qw(:config no_auto_abbrev); @@ -37,6 +37,7 @@ my $scm = 0; my $web = 0; my $subsystem = 0; my $status = 0; +my $keywords = 1; my $from_filename = 0; my $pattern_depth = 0; my $version = 0; @@ -84,6 +85,7 @@ if (!GetOptions( 'scm!' => \$scm, 'web!' => \$web, 'pattern-depth=i' => \$pattern_depth, + 'k|keywords!' => \$keywords, 'f|file' => \$from_filename, 'v|version' => \$version, 'h|help' => \$help, @@ -132,6 +134,8 @@ if (!top_of_kernel_tree($lk_path)) { ## Read MAINTAINERS for type/value pairs my @typevalue = (); +my %keyword_hash; + open(MAINT, "<${lk_path}MAINTAINERS") || die "$P: Can't open MAINTAINERS\n"; while () { my $line = $_; @@ -149,6 +153,8 @@ while () { if ((-d $value)) { $value =~ s@([^/])$@$1/@; } + } elsif ($type eq "K") { + $keyword_hash{@typevalue} = $value; } push(@typevalue, "$type:$value"); } elsif (!/^(\s)*$/) { @@ -188,6 +194,7 @@ if ($email_remove_duplicates) { my @files = (); my @range = (); +my @keyword_tvi = (); foreach my $file (@ARGV) { ##if $file is a directory and it lacks a trailing slash, add one @@ -198,11 +205,24 @@ foreach my $file (@ARGV) { } if ($from_filename) { push(@files, $file); + if (-f $file && $keywords) { + open(FILE, "<$file") or die "$P: Can't open ${file}\n"; + while () { + my $patch_line = $_; + foreach my $line (keys %keyword_hash) { + if ($patch_line =~ m/^.*$keyword_hash{$line}/x) { + push(@keyword_tvi, $line); + } + } + } + close(FILE); + } } else { my $file_cnt = @files; my $lastfile; open(PATCH, "<$file") or die "$P: Can't open ${file}\n"; while () { + my $patch_line = $_; if (m/^\+\+\+\s+(\S+)/) { my $filename = $1; $filename =~ s@^[^/]*/@@; @@ -213,6 +233,12 @@ foreach my $file (@ARGV) { if ($email_git_blame) { push(@range, "$lastfile:$1:$2"); } + } elsif ($keywords) { + foreach my $line (keys %keyword_hash) { + if ($patch_line =~ m/^[+-].*$keyword_hash{$line}/x) { + push(@keyword_tvi, $line); + } + } } } close(PATCH); @@ -286,6 +312,13 @@ foreach my $file (@files) { } } +if ($keywords) { + @keyword_tvi = sort_and_uniq(@keyword_tvi); + foreach my $line (@keyword_tvi) { + add_categories($line); + } +} + if ($email) { foreach my $chief (@penguin_chief) { if ($chief =~ m/^(.*):(.*)/) { @@ -384,6 +417,7 @@ Output type options: Other options: --pattern-depth => Number of pattern directory traversals (default: 0 (all)) + --keywords => scan patch for keywords (default: 1 (on)) --version => show version --help => show this help information @@ -486,7 +520,6 @@ sub format_email { } sub find_starting_index { - my ($index) = @_; while ($index > 0) { -- GitLab From c7c4fb18d0026bdb70d287a97ba9c38a649bf39e Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 26 Oct 2009 16:49:48 -0700 Subject: [PATCH 0319/1165] MAINTAINERS: document new "K:" entry type K: is for keyword. Syntax is perl extended regex. Reorganized header documentation and indent the section entry descriptions so that the first K: would not be considered a regex to match by get_maintainer.pl Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 70 +++++++++++++++++++++++++++++------------------------ 1 file changed, 39 insertions(+), 31 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 6a3f5ab209e..23a61d9d0e7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -65,43 +65,51 @@ trivial patch so apply some common sense. 8. Happy hacking. - ----------------------------------- - -Maintainers List (try to look for most precise areas first) +Descriptions of section entries: + + P: Person (obsolete) + M: Mail patches to: FullName + L: Mailing list that is relevant to this area + W: Web-page with status/info + T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. + S: Status, one of the following: + Supported: Someone is actually paid to look after this. + Maintained: Someone actually looks after it. + Odd Fixes: It has a maintainer but they don't have time to do + much other than throw the odd patch in. See below.. + Orphan: No current maintainer [but maybe you could take the + role as you write your new code]. + Obsolete: Old code. Something tagged obsolete generally means + it has been replaced by a better system and you + should be using that. + F: Files and directories with wildcard patterns. + A trailing slash includes all files and subdirectory files. + F: drivers/net/ all files in and below drivers/net + F: drivers/net/* all files in drivers/net, but not below + F: */net/* all files in "any top level directory"/net + One pattern per line. Multiple F: lines acceptable. + X: Files and directories that are NOT maintained, same rules as F: + Files exclusions are tested before file matches. + Can be useful for excluding a specific subdirectory, for instance: + F: net/ + X: net/ipv6/ + matches all files in and below net excluding net/ipv6/ + K: Keyword perl extended regex pattern to match content in a + patch or file. For instance: + K: of_get_profile + matches patches or files that contain "of_get_profile" + K: \b(printk|pr_(info|err))\b + matches patches or files that contain one or more of the words + printk, pr_info or pr_err + One regex pattern per line. Multiple K: lines acceptable. Note: For the hard of thinking, this list is meant to remain in alphabetical order. If you could add yourselves to it in alphabetical order that would be so much easier [Ed] -P: Person (obsolete) -M: Mail patches to: FullName -L: Mailing list that is relevant to this area -W: Web-page with status/info -T: SCM tree type and location. Type is one of: git, hg, quilt, stgit. -S: Status, one of the following: - - Supported: Someone is actually paid to look after this. - Maintained: Someone actually looks after it. - Odd Fixes: It has a maintainer but they don't have time to do - much other than throw the odd patch in. See below.. - Orphan: No current maintainer [but maybe you could take the - role as you write your new code]. - Obsolete: Old code. Something tagged obsolete generally means - it has been replaced by a better system and you - should be using that. +Maintainers List (try to look for most precise areas first) -F: Files and directories with wildcard patterns. - A trailing slash includes all files and subdirectory files. - F: drivers/net/ all files in and below drivers/net - F: drivers/net/* all files in drivers/net, but not below - F: */net/* all files in "any top level directory"/net - One pattern per line. Multiple F: lines acceptable. -X: Files and directories that are NOT maintained, same rules as F: - Files exclusions are tested before file matches. - Can be useful for excluding a specific subdirectory, for instance: - F: net/ - X: net/ipv6/ - matches all files in and below net excluding net/ipv6/ + ----------------------------------- 3C505 NETWORK DRIVER M: Philip Blundell -- GitLab From 860c44c1968bf9ac401f058549b687fde72ff02a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 26 Oct 2009 16:49:49 -0700 Subject: [PATCH 0320/1165] MAINTAINERS: add Open Firmware / Flattened Device Tree entry Signed-off-by: Grant Likely Cc: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 23a61d9d0e7..63008663f4a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3885,6 +3885,15 @@ S: Maintained F: Documentation/i2c/busses/i2c-ocores F: drivers/i2c/busses/i2c-ocores.c +OPEN FIRMWARE AND FLATTENED DEVICE TREE +M: Grant Likely +L: devicetree-discuss@lists.ozlabs.org +W: http://fdt.secretlab.ca +S: Maintained +F: drivers/of +F: include/linux/of*.h +K: of_get_property + OPROFILE M: Robert Richter L: oprofile-list@lists.sf.net -- GitLab From b5654f5e7fc414a6e69b3647db2b043257c9e62e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 26 Oct 2009 16:49:50 -0700 Subject: [PATCH 0321/1165] MAINTAINERS: rt2x00 list is moderated Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 63008663f4a..ece9f60dc5d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4329,7 +4329,7 @@ F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project L: linux-wireless@vger.kernel.org -L: users@rt2x00.serialmonkey.com +L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git -- GitLab From 5c36fe3d87b3f0c85894a49193c66096a3d6b26f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 26 Oct 2009 16:49:51 -0700 Subject: [PATCH 0322/1165] hfsplus: refuse to mount volumes larger than 2TB As found in , hfsplus is using type u32 rather than sector_t for some sector number calculations. In particular, hfsplus_get_block() does: u32 ablock, dblock, mask; ... map_bh(bh_result, sb, (dblock << HFSPLUS_SB(sb).fs_shift) + HFSPLUS_SB(sb).blockoffset + (iblock & mask)); I am not confident that I can find and fix all cases where a sector number may be truncated. For now, avoid data loss by refusing to mount HFS+ volumes with more than 2^32 sectors (2TB). [akpm@linux-foundation.org: fix 32 and 64-bit issues] Signed-off-by: Ben Hutchings Cc: Eric Sesterhenn Cc: Roman Zippel Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/hfsplus/wrapper.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c index 175d08eacc8..bed78ac8f6d 100644 --- a/fs/hfsplus/wrapper.c +++ b/fs/hfsplus/wrapper.c @@ -99,6 +99,10 @@ int hfsplus_read_wrapper(struct super_block *sb) if (hfsplus_get_last_session(sb, &part_start, &part_size)) return -EINVAL; + if ((u64)part_start + part_size > 0x100000000ULL) { + pr_err("hfs: volumes larger than 2TB are not supported yet\n"); + return -EINVAL; + } while (1) { bh = sb_bread512(sb, part_start + HFSPLUS_VOLHEAD_SECTOR, vhdr); if (!bh) -- GitLab From b76146ed1ae7d7acae1d51f9342e31d00c8d5a12 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 26 Oct 2009 16:49:52 -0700 Subject: [PATCH 0323/1165] revert "mm: oom analysis: add buffer cache information to show_free_areas()" Revert commit 71de1ccbe1fb40203edd3beb473f8580d917d2ca Author: KOSAKI Motohiro AuthorDate: Mon Sep 21 17:01:31 2009 -0700 Commit: Linus Torvalds CommitDate: Tue Sep 22 07:17:27 2009 -0700 mm: oom analysis: add buffer cache information to show_free_areas() show_free_areas() is called during page allocation failures, and page allocation failures can occur in any calling context. But nr_blockdev_pages() takes VFS locks which should not be taken from hard IRQ context (at least). The result is lockdep warnings (and deadlockability) during page allocation failures. Cc: KOSAKI Motohiro Cc: Wu Fengguang Cc: Rik van Riel Cc: David Rientjes Cc: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index bf720550b44..cdcedf66161 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2183,7 +2183,7 @@ void show_free_areas(void) printk("active_anon:%lu inactive_anon:%lu isolated_anon:%lu\n" " active_file:%lu inactive_file:%lu isolated_file:%lu\n" " unevictable:%lu" - " dirty:%lu writeback:%lu unstable:%lu buffer:%lu\n" + " dirty:%lu writeback:%lu unstable:%lu\n" " free:%lu slab_reclaimable:%lu slab_unreclaimable:%lu\n" " mapped:%lu shmem:%lu pagetables:%lu bounce:%lu\n", global_page_state(NR_ACTIVE_ANON), @@ -2196,7 +2196,6 @@ void show_free_areas(void) global_page_state(NR_FILE_DIRTY), global_page_state(NR_WRITEBACK), global_page_state(NR_UNSTABLE_NFS), - nr_blockdev_pages(), global_page_state(NR_FREE_PAGES), global_page_state(NR_SLAB_RECLAIMABLE), global_page_state(NR_SLAB_UNRECLAIMABLE), -- GitLab From 41e20983fe553b39bc2b00e07c7a379f0c86a4bc Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Mon, 26 Oct 2009 16:49:53 -0700 Subject: [PATCH 0324/1165] vmscan: limit VM_EXEC protection to file pages It is possible to have !Anon but SwapBacked pages, and some apps could create huge number of such pages with MAP_SHARED|MAP_ANONYMOUS. These pages go into the ANON lru list, and hence shall not be protected: we only care mapped executable files. Failing to do so may trigger OOM. Tested-by: Christian Borntraeger Reviewed-by: Rik van Riel Signed-off-by: Wu Fengguang Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index fbb9f6bdad6..fbcac3bdcf1 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1356,7 +1356,7 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, * IO, plus JVM can create lots of anon VM_EXEC pages, * so we ignore them here. */ - if ((vm_flags & VM_EXEC) && !PageAnon(page)) { + if ((vm_flags & VM_EXEC) && page_is_file_cache(page)) { list_add(&page->lru, &l_active); continue; } -- GitLab From cf6e693212263d33c5882e4653df89a2fca4c0c4 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 26 Oct 2009 16:49:55 -0700 Subject: [PATCH 0325/1165] loop: fix NULL dereference if mount fails Commit bb21488482bd36eae6b30b014d93619063773fd4 ("[PATCH] switch loop") started to pass NULL bdev to ioctl hook. Steps to reproduce: [boot with loop.max_part=1] [mount -o loop something so mount fails] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b8 IP: [] blkdev_ioctl+0x2e/0xa30 PGD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/ACPI0003:00/power_supply/ACAD/online CPU 0 Modules linked in: zfs nvidia(P) [last unloaded: zfs] Pid: 15177, comm: mount Tainted: P 2.6.32-rc4-zfs #2 Satellite X200 RIP: 0010:[] [] blkdev_ioctl+0x2e/0xa30 RSP: 0018:ffff88003b3d5bb8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 000000000000125f RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88003b3d5ce8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 00007ffffffff000 R13: 0000000000000000 R14: ffff880071cef280 R15: 00000000000200da FS: 00007fd77cfe7740(0000) GS:ffff880001600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00000000000000b8 CR3: 0000000001001000 CR4: 00000000000026f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process mount (pid: 15177, threadinfo ffff88003b3d4000, task ffff88007572f920) Stack: ffff88003b3d5c38 ffffffff812f95f5 ffff88007eeb6600 0000000000000000 <0> 0000000000000000 ffff88003b3d5c18 ffffffff811547d9 ffff88001bf11ef0 <0> 7fffffffffffffff ffff88001bf11ee8 ffff88001bf11ef0 0000000000000000 Call Trace: [] ? schedule_timeout+0x1f5/0x250 [] ? rb_insert_color+0x109/0x140 [] ? _spin_unlock_irq+0x14/0x40 [] ? wait_for_common+0x66/0x170 [] ? default_wake_function+0x0/0x10 [] ioctl_by_bdev+0x38/0x50 [] loop_clr_fd+0x1e1/0x210 [] lo_release+0x72/0x80 [] __blkdev_put+0x1ac/0x1d0 [] blkdev_put+0xb/0x10 [] blkdev_close+0x39/0x60 [] __fput+0xd3/0x230 [] fput+0x1d/0x30 [] filp_close+0x50/0x80 [] put_files_struct+0x81/0x100 [] exit_files+0x4e/0x60 [] do_exit+0x6b5/0x730 [] ? up_read+0x9/0x10 [] ? do_page_fault+0x18e/0x2a0 [] do_group_exit+0x41/0xc0 [] sys_exit_group+0x12/0x20 [] system_call_fastpath+0x16/0x1b Code: f8 48 89 e5 48 81 ec 30 01 00 00 48 89 5d d8 4c 89 6d e8 4c 89 65 e0 4c 89 75 f0 4c 89 7d f8 48 89 bd e8 fe ff ff 49 89 cd 89 f3 <49> 8b 88 b8 00 00 00 81 fa 68 12 00 00 0f 84 57 05 00 00 0f 86 RIP [] blkdev_ioctl+0x2e/0xa30 RSP CR2: 00000000000000b8 ---[ end trace c0b4d3c3118d1427 ]--- Fixing recursive fault but reboot is needed! Signed-off-by: Alexey Dobriyan Cc: Jens Axboe Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/loop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index edda9ea7c62..bd112c8c7bc 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -949,7 +949,7 @@ static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev) lo->lo_state = Lo_unbound; /* This is safe: open() is still holding a reference. */ module_put(THIS_MODULE); - if (max_part > 0) + if (max_part > 0 && bdev) ioctl_by_bdev(bdev, BLKRRPART, 0); mutex_unlock(&lo->lo_ctl_mutex); /* -- GitLab From 47f365eb575735c6b2edf5d08e0d16d26a9c23bd Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Mon, 26 Oct 2009 16:49:56 -0700 Subject: [PATCH 0326/1165] hfs: fix oops on mount with corrupted btree extent records A particular fsfuzzer run caused an hfs file system to crash on mount. This is due to a corrupted MDB extent record causing a miscalculation of HFS_I(inode)->first_blocks for the extent tree. If the extent records are zereod out, it won't trigger the first_blocks special case. Instead it falls through to the extent code which we're still in the middle of initializing. This patch catches the 0 size extent records, reports the corruption, and fails the mount. Reported-by: Ramon de Carvalho Valle Signed-off-by: Jeff Mahoney Cc: Valdis Kletnieks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/hfs/btree.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c index 9b9d6395bad..052f214ea6f 100644 --- a/fs/hfs/btree.c +++ b/fs/hfs/btree.c @@ -58,6 +58,11 @@ struct hfs_btree *hfs_btree_open(struct super_block *sb, u32 id, btree_keycmp ke } unlock_new_inode(tree->inode); + if (!HFS_I(tree->inode)->first_blocks) { + printk(KERN_ERR "hfs: invalid btree extent records (0 size).\n"); + goto free_inode; + } + mapping = tree->inode->i_mapping; page = read_mapping_page(mapping, 0, NULL); if (IS_ERR(page)) -- GitLab From ab8a3e14e6f8e567560f664bbd29aefb306a274e Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 26 Oct 2009 16:49:58 -0700 Subject: [PATCH 0327/1165] mbind(): fix leak of never putback pages If mbind() receives an invalid address, do_mbind leaks a page. The following test program detects this leak. This patch fixes it. migrate_efault.c ======================================= #include #include #include #include #include #include #include static unsigned long pagesize; static void* make_hole_mapping(void) { void* addr; addr = mmap(NULL, pagesize*3, PROT_READ|PROT_WRITE, MAP_ANON|MAP_PRIVATE, 0, 0); if (addr == MAP_FAILED) return NULL; /* make page populate */ memset(addr, 0, pagesize*3); /* make memory hole */ munmap(addr+pagesize, pagesize); return addr; } int main(int argc, char** argv) { void* addr; int ch; int node; struct bitmask *nmask = numa_allocate_nodemask(); int err; int node_set = 0; while ((ch = getopt(argc, argv, "n:")) != -1){ switch (ch){ case 'n': node = strtol(optarg, NULL, 0); numa_bitmask_setbit(nmask, node); node_set = 1; break; default: ; } } argc -= optind; argv += optind; if (!node_set) numa_bitmask_setbit(nmask, 0); pagesize = getpagesize(); addr = make_hole_mapping(); err = mbind(addr, pagesize*3, MPOL_BIND, nmask->maskp, nmask->size, MPOL_MF_MOVE_ALL); if (err) perror("mbind "); return 0; } ======================================= Signed-off-by: KOSAKI Motohiro Acked-by: Christoph Lameter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 7dd9d9f8069..d49956d3025 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1058,7 +1058,8 @@ static long do_mbind(unsigned long start, unsigned long len, if (!err && nr_failed && (flags & MPOL_MF_STRICT)) err = -EIO; - } + } else + putback_lru_pages(&pagelist); up_write(&mm->mmap_sem); mpol_put(new); -- GitLab From b05ca7385a2848abdc72051f832722641daed8b0 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Mon, 26 Oct 2009 16:49:59 -0700 Subject: [PATCH 0328/1165] do_mbind(): fix memory leak If migrate_prep is failed, new variable is leaked. This patch fixes it. Signed-off-by: KOSAKI Motohiro Acked-by: Christoph Lameter Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index d49956d3025..4545d594424 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1024,7 +1024,7 @@ static long do_mbind(unsigned long start, unsigned long len, err = migrate_prep(); if (err) - return err; + goto mpol_out; } { NODEMASK_SCRATCH(scratch); @@ -1039,10 +1039,9 @@ static long do_mbind(unsigned long start, unsigned long len, err = -ENOMEM; NODEMASK_SCRATCH_FREE(scratch); } - if (err) { - mpol_put(new); - return err; - } + if (err) + goto mpol_out; + vma = check_range(mm, start, end, nmask, flags | MPOL_MF_INVERT, &pagelist); @@ -1062,6 +1061,7 @@ static long do_mbind(unsigned long start, unsigned long len, putback_lru_pages(&pagelist); up_write(&mm->mmap_sem); + mpol_out: mpol_put(new); return err; } -- GitLab From 6a7b95481d49f73991d3dbf8c1e696a24684ac05 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Mon, 26 Oct 2009 16:50:00 -0700 Subject: [PATCH 0329/1165] vmscan: order evictable rescue in LRU putback Isolators putting a page back to the LRU do not hold the page lock, and if the page is mlocked, another thread might munlock it concurrently. Expecting this, the putback code re-checks the evictability of a page when it just moved it to the unevictable list in order to correct its decision. The problem, however, is that ordering is not garuanteed between setting PG_lru when moving the page to the list and checking PG_mlocked afterwards: #0: #1 spin_lock() if (TestClearPageMlocked()) if (PageLRU()) move to evictable list SetPageLRU() spin_unlock() if (!PageMlocked()) move to evictable list The PageMlocked() check may get reordered before SetPageLRU() in #0, resulting in #0 not moving the still mlocked page, and in #1 failing to isolate and move the page as well. The page is now stranded on the unevictable list. The race condition is very unlikely. The consequence currently is one page falling off the reclaim grid and eventually getting freed with PG_unevictable set, which triggers a warning in the page allocator. TestClearPageMlocked() in #1 already provides full memory barrier semantics. This patch adds an explicit full barrier to force ordering between SetPageLRU() and PageMlocked() so that either one of the competitors rescues the page. Signed-off-by: Johannes Weiner Reviewed-by: KOSAKI Motohiro Cc: Hugh Dickins Cc: Mel Gorman Cc: Lee Schermerhorn Cc: Peter Zijlstra Reviewed-by: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/mm/vmscan.c b/mm/vmscan.c index fbcac3bdcf1..777af57fd8c 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -544,6 +544,16 @@ redo: */ lru = LRU_UNEVICTABLE; add_page_to_unevictable_list(page); + /* + * When racing with an mlock clearing (page is + * unlocked), make sure that if the other thread does + * not observe our setting of PG_lru and fails + * isolation, we see PG_mlocked cleared below and move + * the page back to the evictable list. + * + * The other side is TestClearPageMlocked(). + */ + smp_mb(); } /* -- GitLab From 9d09daf8e891e6ed60f96fbaf765ba7bced8bad1 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 26 Oct 2009 16:50:02 -0700 Subject: [PATCH 0330/1165] atmel_serial: fix bad BUILD_BUG_ON() usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit is_power_of_2() appears not to be constant enough for BUILD_BUG_ON() after the latest rework, so replace it with an open-coded test. Signed-off-by: Haavard Skinnemoen Cc: Uwe Kleine-König Cc: Jan Beulich Cc: Haavard Skinnemoen Cc: Alan Cox Cc: Nicolas Ferre Cc: Claudio Scordino Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/atmel_serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index 3551c5cb709..9d948bccafa 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1531,7 +1531,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev) void *data; int ret; - BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE)); + BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1)); port = &atmel_ports[pdev->id]; port->backup_imr = 0; -- GitLab From 1b62cbf2140df510a56d38b9d49df2aae95cd0d2 Mon Sep 17 00:00:00 2001 From: "Krauth.Julien" Date: Mon, 26 Oct 2009 16:50:04 -0700 Subject: [PATCH 0331/1165] serial: add ADDI-DATA GmbH PCI-Express communication cards in 8250_pci.c and pci_ids.h Add support for ADDI-DATA GmbH PCI-Express communication cards: APCIe-7300 APCIe-7420 APCIe-7500 APCIe-7800 Warning: 8250_pci.c depends on pci_ids.h. 8250_pci.c Signed-off-by: Krauth Julien Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 67 +++++++++++++++++++++++++++++++++++++++ include/linux/pci_ids.h | 4 +++ 2 files changed, 71 insertions(+) diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index e7108e75653..32946936990 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -1566,6 +1566,10 @@ enum pci_board_num_t { pbn_ni8430_4, pbn_ni8430_8, pbn_ni8430_16, + pbn_ADDIDATA_PCIe_1_3906250, + pbn_ADDIDATA_PCIe_2_3906250, + pbn_ADDIDATA_PCIe_4_3906250, + pbn_ADDIDATA_PCIe_8_3906250, }; /* @@ -2185,6 +2189,37 @@ static struct pciserial_board pci_boards[] __devinitdata = { .uart_offset = 0x10, .first_offset = 0x800, }, + /* + * ADDI-DATA GmbH PCI-Express communication cards + */ + [pbn_ADDIDATA_PCIe_1_3906250] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_2_3906250] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_4_3906250] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_ADDIDATA_PCIe_8_3906250] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 3906250, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, }; static const struct pci_device_id softmodem_blacklist[] = { @@ -3556,6 +3591,38 @@ static struct pci_device_id serial_pci_tbl[] = { 0, pbn_b0_8_115200 }, + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7500, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_4_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7420, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_2_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7300, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_1_3906250 }, + + { PCI_VENDOR_ID_ADDIDATA, + PCI_DEVICE_ID_ADDIDATA_APCIe7800, + PCI_ANY_ID, + PCI_ANY_ID, + 0, + 0, + pbn_ADDIDATA_PCIe_8_3906250 }, + { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 86257a41273..df48628d870 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2160,6 +2160,10 @@ #define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D #define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E #define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F +#define PCI_DEVICE_ID_ADDIDATA_APCIe7300 0x7010 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7420 0x7011 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7500 0x7012 +#define PCI_DEVICE_ID_ADDIDATA_APCIe7800 0x7013 #define PCI_VENDOR_ID_PDC 0x15e9 -- GitLab From c68d2b1594548cda7f6dbac6a4d9d30a9b01558c Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 26 Oct 2009 16:50:05 -0700 Subject: [PATCH 0332/1165] 8250_pci: add IBM Saturn serial card The IBM Saturn serial card has only one port. Without that fixup, the kernel thinks it has two, which confuses userland setup and admin tools as well. [akpm@linux-foundation.org: fix pci-ids.h layout] Signed-off-by: Benjamin Herrenschmidt Acked-by: Alan Cox Cc: Michael Reed Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 11 +++++++++++ include/linux/pci_ids.h | 3 +++ 2 files changed, 14 insertions(+) diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 32946936990..42e8550cd2b 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -1561,6 +1561,7 @@ enum pci_board_num_t { pbn_exar_XR17C152, pbn_exar_XR17C154, pbn_exar_XR17C158, + pbn_exar_ibm_saturn, pbn_pasemi_1682M, pbn_ni8430_2, pbn_ni8430_4, @@ -2150,6 +2151,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 921600, .uart_offset = 0x200, }, + [pbn_exar_ibm_saturn] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 921600, + .uart_offset = 0x200, + }, + /* * PA Semi PWRficient PA6T-1682M on-chip UART */ @@ -2684,6 +2692,9 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0, pbn_b0_8_1843200_200 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152, + PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT, + 0, 0, pbn_exar_ibm_saturn }, { PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530, PCI_ANY_ID, PCI_ANY_ID, 0, 0, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index df48628d870..b0f0f3851cd 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -482,6 +482,9 @@ #define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361 #define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252 +#define PCI_SUBVENDOR_ID_IBM 0x1014 +#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT 0x03d4 + #define PCI_VENDOR_ID_UNISYS 0x1018 #define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C -- GitLab From 46c529cf79f6c7b239f83b4997d676dd5b51908c Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 26 Oct 2009 16:50:06 -0700 Subject: [PATCH 0333/1165] twl4030-gpio: remove __devexit markings from remove func The gpio_twl4030_probe() function calls gpio_twl4030_remove(), and the former has __devinit, so the latter cannot use __devexit. Otherwise we hit the section mismatch warning: WARNING: drivers/gpio/built-in.o(.devinit.text+0x71a): Section mismatch in reference from the function _gpio_twl4030_probe() to the function .devexit.text:_gpio_twl4030_remove() The function __devinit _gpio_twl4030_probe() references a function __devexit _gpio_twl4030_remove(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __devexit annotation of _gpio_twl4030_remove() so it may be used outside an exit section. Signed-off-by: Mike Frysinger Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/twl4030-gpio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c index afad1479214..49384a7c549 100644 --- a/drivers/gpio/twl4030-gpio.c +++ b/drivers/gpio/twl4030-gpio.c @@ -460,7 +460,8 @@ no_irqs: return ret; } -static int __devexit gpio_twl4030_remove(struct platform_device *pdev) +/* Cannot use __devexit as gpio_twl4030_probe() calls us */ +static int gpio_twl4030_remove(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; int status; @@ -493,7 +494,7 @@ static struct platform_driver gpio_twl4030_driver = { .driver.name = "twl4030_gpio", .driver.owner = THIS_MODULE, .probe = gpio_twl4030_probe, - .remove = __devexit_p(gpio_twl4030_remove), + .remove = gpio_twl4030_remove, }; static int __init gpio_twl4030_init(void) -- GitLab From 115a57c5b31ab560574fe1a09deaba2ae89e77b5 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Mon, 26 Oct 2009 16:50:07 -0700 Subject: [PATCH 0334/1165] hwmon: enhance the sysfs API for power meters Augment the documentation of the hwmon sysfs API to accomodate ACPI power meters and the current desired behavior of power capping hardware drivers. Signed-off-by: Darrick J. Wong Cc: Zhang Rui Cc: Pavel Machek Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/hwmon/sysfs-interface | 57 ++++++++++++++++++++++++++++- 1 file changed, 56 insertions(+), 1 deletion(-) diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index dcbd502c879..82def883361 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -353,10 +353,20 @@ power[1-*]_average Average power use Unit: microWatt RO -power[1-*]_average_interval Power use averaging interval +power[1-*]_average_interval Power use averaging interval. A poll + notification is sent to this file if the + hardware changes the averaging interval. Unit: milliseconds RW +power[1-*]_average_interval_max Maximum power use averaging interval + Unit: milliseconds + RO + +power[1-*]_average_interval_min Minimum power use averaging interval + Unit: milliseconds + RO + power[1-*]_average_highest Historical average maximum power use Unit: microWatt RO @@ -365,6 +375,18 @@ power[1-*]_average_lowest Historical average minimum power use Unit: microWatt RO +power[1-*]_average_max A poll notification is sent to + power[1-*]_average when power use + rises above this value. + Unit: microWatt + RW + +power[1-*]_average_min A poll notification is sent to + power[1-*]_average when power use + sinks below this value. + Unit: microWatt + RW + power[1-*]_input Instantaneous power use Unit: microWatt RO @@ -381,6 +403,39 @@ power[1-*]_reset_history Reset input_highest, input_lowest, average_highest and average_lowest. WO +power[1-*]_accuracy Accuracy of the power meter. + Unit: Percent + RO + +power[1-*]_alarm 1 if the system is drawing more power than the + cap allows; 0 otherwise. A poll notification is + sent to this file when the power use exceeds the + cap. This file only appears if the cap is known + to be enforced by hardware. + RO + +power[1-*]_cap If power use rises above this limit, the + system should take action to reduce power use. + A poll notification is sent to this file if the + cap is changed by the hardware. The *_cap + files only appear if the cap is known to be + enforced by hardware. + Unit: microWatt + RW + +power[1-*]_cap_hyst Margin of hysteresis built around capping and + notification. + Unit: microWatt + RW + +power[1-*]_cap_max Maximum cap that can be set. + Unit: microWatt + RO + +power[1-*]_cap_min Minimum cap that can be set. + Unit: microWatt + RO + ********** * Energy * ********** -- GitLab From 8c85dd8730bfb696e691145335f884c7baef8277 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 26 Oct 2009 16:50:07 -0700 Subject: [PATCH 0335/1165] sysctl: fix false positives when PROC_SYSCTL=n Having ->procname but not ->proc_handler is valid when PROC_SYSCTL=n, people use such combination to reduce ifdefs with non-standard handlers. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14408 Signed-off-by: Alexey Dobriyan Reported-by: Peter Teoh Cc: "Eric W. Biederman" Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sysctl_check.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sysctl_check.c b/kernel/sysctl_check.c index b38423ca711..b6e7aaea460 100644 --- a/kernel/sysctl_check.c +++ b/kernel/sysctl_check.c @@ -1521,7 +1521,7 @@ int sysctl_check_table(struct nsproxy *namespaces, struct ctl_table *table) if (!table->ctl_name && table->strategy) set_fail(&fail, table, "Strategy without ctl_name"); #endif -#ifdef CONFIG_PROC_FS +#ifdef CONFIG_PROC_SYSCTL if (table->procname && !table->proc_handler) set_fail(&fail, table, "No proc_handler"); #endif -- GitLab From 156edd4aaa819ec5867ced83c7b8dba9193789ea Mon Sep 17 00:00:00 2001 From: Jeff Roberson Date: Mon, 26 Oct 2009 16:50:09 -0700 Subject: [PATCH 0336/1165] edac: i5400 fix csrow mapping The i5400 EDAC driver has several bugs with chip-select row computation which most likely lead to bugs in detailed error reporting. Attempts to contact the authors have gone mostly unanswered so I am presenting my diff here. I do not subscribe to lkml and would appreciate being kept in the cc. The most egregious problem was miscalculating the addresses of MTR registers after register 0 by assuming they are 32bit rather than 16. This caused the driver to miss half of the memories. Most motherboards tend to have only 8 dimm slots and not 16, so this may not have been noticed before. Further, the row calculations multiplied the number of dimms several times, ultimately ending up with a maximum row of 32. The chipset only supports 4 dimms in each of 4 channels, so csrow could not be higher than 4 unless you use a row per-rank with dual-rank dimms. I opted to eliminate this behavior as it is confusing to the user and the error reporting works by slot and not rank. This gives a much clearer view of memory by slot and channel in /sys. Signed-off-by: Jeff Roberson Signed-off-by: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/i5400_edac.c | 89 ++++++++++++--------------------------- 1 file changed, 28 insertions(+), 61 deletions(-) diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c index b08b6d8e2dc..f99d10655ed 100644 --- a/drivers/edac/i5400_edac.c +++ b/drivers/edac/i5400_edac.c @@ -46,9 +46,10 @@ /* Limits for i5400 */ #define NUM_MTRS_PER_BRANCH 4 #define CHANNELS_PER_BRANCH 2 +#define MAX_DIMMS_PER_CHANNEL NUM_MTRS_PER_BRANCH #define MAX_CHANNELS 4 -#define MAX_DIMMS (MAX_CHANNELS * 4) /* Up to 4 DIMM's per channel */ -#define MAX_CSROWS (MAX_DIMMS * 2) /* max possible csrows per channel */ +/* max possible csrows per channel */ +#define MAX_CSROWS (MAX_DIMMS_PER_CHANNEL) /* Device 16, * Function 0: System Address @@ -331,7 +332,6 @@ static const struct i5400_dev_info i5400_devs[] = { struct i5400_dimm_info { int megabytes; /* size, 0 means not present */ - int dual_rank; }; /* driver private data structure */ @@ -849,11 +849,9 @@ static int determine_mtr(struct i5400_pvt *pvt, int csrow, int channel) int n; /* There is one MTR for each slot pair of FB-DIMMs, - Each slot may have one or two ranks (2 csrows), Each slot pair may be at branch 0 or branch 1. - So, csrow should be divided by eight */ - n = csrow >> 3; + n = csrow; if (n >= NUM_MTRS_PER_BRANCH) { debugf0("ERROR: trying to access an invalid csrow: %d\n", @@ -905,25 +903,22 @@ static void handle_channel(struct i5400_pvt *pvt, int csrow, int channel, amb_present_reg = determine_amb_present_reg(pvt, channel); /* Determine if there is a DIMM present in this DIMM slot */ - if (amb_present_reg & (1 << (csrow >> 1))) { - dinfo->dual_rank = MTR_DIMM_RANK(mtr); - - if (!((dinfo->dual_rank == 0) && - ((csrow & 0x1) == 0x1))) { - /* Start with the number of bits for a Bank - * on the DRAM */ - addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr); - /* Add thenumber of ROW bits */ - addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); - /* add the number of COLUMN bits */ - addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); - - addrBits += 6; /* add 64 bits per DIMM */ - addrBits -= 20; /* divide by 2^^20 */ - addrBits -= 3; /* 8 bits per bytes */ - - dinfo->megabytes = 1 << addrBits; - } + if (amb_present_reg & (1 << csrow)) { + /* Start with the number of bits for a Bank + * on the DRAM */ + addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr); + /* Add thenumber of ROW bits */ + addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr); + /* add the number of COLUMN bits */ + addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr); + /* add the number of RANK bits */ + addrBits += MTR_DIMM_RANK(mtr); + + addrBits += 6; /* add 64 bits per DIMM */ + addrBits -= 20; /* divide by 2^^20 */ + addrBits -= 3; /* 8 bits per bytes */ + + dinfo->megabytes = 1 << addrBits; } } } @@ -951,12 +946,12 @@ static void calculate_dimm_size(struct i5400_pvt *pvt) return; } - /* Scan all the actual CSROWS (which is # of DIMMS * 2) + /* Scan all the actual CSROWS * and calculate the information for each DIMM * Start with the highest csrow first, to display it first * and work toward the 0th csrow */ - max_csrows = pvt->maxdimmperch * 2; + max_csrows = pvt->maxdimmperch; for (csrow = max_csrows - 1; csrow >= 0; csrow--) { /* on an odd csrow, first output a 'boundary' marker, @@ -1064,7 +1059,7 @@ static void i5400_get_mc_regs(struct mem_ctl_info *mci) /* Get the set of MTR[0-3] regs by each branch */ for (slot_row = 0; slot_row < NUM_MTRS_PER_BRANCH; slot_row++) { - int where = MTR0 + (slot_row * sizeof(u32)); + int where = MTR0 + (slot_row * sizeof(u16)); /* Branch 0 set of MTR registers */ pci_read_config_word(pvt->branch_0, where, @@ -1146,7 +1141,7 @@ static int i5400_init_csrows(struct mem_ctl_info *mci) pvt = mci->pvt_info; channel_count = pvt->maxch; - max_csrows = pvt->maxdimmperch * 2; + max_csrows = pvt->maxdimmperch; empty = 1; /* Assume NO memory */ @@ -1214,28 +1209,6 @@ static void i5400_enable_error_reporting(struct mem_ctl_info *mci) fbd_error_mask); } -/* - * i5400_get_dimm_and_channel_counts(pdev, &num_csrows, &num_channels) - * - * ask the device how many channels are present and how many CSROWS - * as well - */ -static void i5400_get_dimm_and_channel_counts(struct pci_dev *pdev, - int *num_dimms_per_channel, - int *num_channels) -{ - u8 value; - - /* Need to retrieve just how many channels and dimms per channel are - * supported on this memory controller - */ - pci_read_config_byte(pdev, MAXDIMMPERCH, &value); - *num_dimms_per_channel = (int)value * 2; - - pci_read_config_byte(pdev, MAXCH, &value); - *num_channels = (int)value; -} - /* * i5400_probe1 Probe for ONE instance of device to see if it is * present. @@ -1263,22 +1236,16 @@ static int i5400_probe1(struct pci_dev *pdev, int dev_idx) if (PCI_FUNC(pdev->devfn) != 0) return -ENODEV; - /* Ask the devices for the number of CSROWS and CHANNELS so - * that we can calculate the memory resources, etc - * - * The Chipset will report what it can handle which will be greater - * or equal to what the motherboard manufacturer will implement. - * - * As we don't have a motherboard identification routine to determine + /* As we don't have a motherboard identification routine to determine * actual number of slots/dimms per channel, we thus utilize the * resource as specified by the chipset. Thus, we might have * have more DIMMs per channel than actually on the mobo, but this * allows the driver to support upto the chipset max, without * some fancy mobo determination. */ - i5400_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel, - &num_channels); - num_csrows = num_dimms_per_channel * 2; + num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL; + num_channels = MAX_CHANNELS; + num_csrows = num_dimms_per_channel; debugf0("MC: %s(): Number of - Channels= %d DIMMS= %d CSROWS= %d\n", __func__, num_channels, num_dimms_per_channel, num_csrows); -- GitLab From 0616fb003d4f799c4be62275242fc7ff9a968f84 Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Mon, 26 Oct 2009 16:50:10 -0700 Subject: [PATCH 0337/1165] edac: i5400 fix missing CONFIG_PCI define When building without CONFIG_PCI the edac_pci_idx variable is unused, causing a build-time warning. Wrap the variable in #ifdef CONFIG_PCI, just like the rest of the PCI support. Signed-off-by: Ira W. Snyder Signed-off-by: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/mpc85xx_edac.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 157f6504f25..cf27402af97 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -26,7 +26,9 @@ #include "mpc85xx_edac.h" static int edac_dev_idx; +#ifdef CONFIG_PCI static int edac_pci_idx; +#endif static int edac_mc_idx; static u32 orig_ddr_err_disable; -- GitLab From c2494ace990c5d37cfe66911b85d28e6945eadfc Mon Sep 17 00:00:00 2001 From: Keith Mannthey Date: Mon, 26 Oct 2009 16:50:11 -0700 Subject: [PATCH 0338/1165] edac: i5100 fix initialization code Allow csrows to properly initialize when the topology only has active channels on 2 and 3. This new check allows proper detection and initialization in this topology. Only checking the first mrt that represented channels 0 and 1 is not sufficient. I also fixed up the related debug information path. I can submit as a 2nd patch if needed. Signed-off-by: Keith Mannthey Acked-by: Aristeu Rozanski Signed-off-by: Doug Thompson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/edac/i5000_edac.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c index d335086f4a2..77a9579d716 100644 --- a/drivers/edac/i5000_edac.c +++ b/drivers/edac/i5000_edac.c @@ -1173,7 +1173,7 @@ static void i5000_get_mc_regs(struct mem_ctl_info *mci) pci_read_config_word(pvt->branch_1, where, &pvt->b1_mtr[slot_row]); debugf2("MTR%d where=0x%x B1 value=0x%x\n", slot_row, - where, pvt->b0_mtr[slot_row]); + where, pvt->b1_mtr[slot_row]); } else { pvt->b1_mtr[slot_row] = 0; } @@ -1232,7 +1232,7 @@ static int i5000_init_csrows(struct mem_ctl_info *mci) struct csrow_info *p_csrow; int empty, channel_count; int max_csrows; - int mtr; + int mtr, mtr1; int csrow_megs; int channel; int csrow; @@ -1251,9 +1251,10 @@ static int i5000_init_csrows(struct mem_ctl_info *mci) /* use branch 0 for the basis */ mtr = pvt->b0_mtr[csrow >> 1]; + mtr1 = pvt->b1_mtr[csrow >> 1]; /* if no DIMMS on this row, continue */ - if (!MTR_DIMMS_PRESENT(mtr)) + if (!MTR_DIMMS_PRESENT(mtr) && !MTR_DIMMS_PRESENT(mtr1)) continue; /* FAKE OUT VALUES, FIXME */ -- GitLab From 1a83e175dc2c7be931a3ea9c7fb0769e6de55e90 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 26 Oct 2009 16:50:12 -0700 Subject: [PATCH 0339/1165] mm: fix sparsemem configuration Currently, sparsemem is only available if EXPERIMENTAL is enabled. However, it hasn't ever been marked experimental. It's been about four years since sparsemem was merged, and we have platforms which depend on it; allow architectures to decide whether sparsemem should be the default memory model. Signed-off-by: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/Kconfig b/mm/Kconfig index 57963c6063d..f791196cee8 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -67,7 +67,7 @@ config DISCONTIGMEM config SPARSEMEM def_bool y - depends on SPARSEMEM_MANUAL + depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL config FLATMEM def_bool y -- GitLab From 9a974fdbe3fbb4b0f6d552579dc79ac237412c61 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 26 Oct 2009 16:50:12 -0700 Subject: [PATCH 0340/1165] checkpatch: possible types -- prevent illegal modifiers being added Prevent known non types being detected as modifiers. Ensure we do not look at any type which starts with a keyword. Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 87bbb8bce9b..b43e309c38f 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -997,23 +997,25 @@ sub annotate_values { sub possible { my ($possible, $line) = @_; - - print "CHECK<$possible> ($line)\n" if ($dbg_possible > 2); - if ($possible !~ /(?: + my $notPermitted = qr{(?: ^(?: $Modifier| $Storage| $Type| - DEFINE_\S+| + DEFINE_\S+ + )$| + ^(?: goto| return| case| else| asm|__asm__| do - )$| + )(?:\s|$)| ^(?:typedef|struct|enum)\b - )/x) { + )}x; + warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2); + if ($possible !~ $notPermitted) { # Check for modifiers. $possible =~ s/\s*$Storage\s*//g; $possible =~ s/\s*$Sparse\s*//g; @@ -1022,8 +1024,10 @@ sub possible { } elsif ($possible =~ /\s/) { $possible =~ s/\s*$Type\s*//g; for my $modifier (split(' ', $possible)) { - warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible); - push(@modifierList, $modifier); + if ($modifier !~ $notPermitted) { + warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible); + push(@modifierList, $modifier); + } } } else { -- GitLab From cc77cdca5209c1199deb33f3a83df191ac32f4d6 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 26 Oct 2009 16:50:13 -0700 Subject: [PATCH 0341/1165] checkpatch: correctly stop scanning at the bottom of a hunk We are allowing context scanning checks to apply against the first line of context outside at the end of the hunk. This can lead to false matches to patch names leading to various perl warnings. Correctly stop at the bottom of the hunk. Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index b43e309c38f..1eca1e14358 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1234,7 +1234,6 @@ sub process { $linenr++; my $rawline = $rawlines[$linenr - 1]; - my $hunk_line = ($realcnt != 0); #extract the line range in the file after the patch is applied if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) { @@ -1274,6 +1273,8 @@ sub process { $realcnt--; } + my $hunk_line = ($realcnt != 0); + #make up the handle for any error we report on this line $prefix = "$filename:$realline: " if ($emacs && $file); $prefix = "$filename:$linenr: " if ($emacs && !$file); -- GitLab From 131edb3418018b6da297ed389b541e697043a8b6 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 26 Oct 2009 16:50:14 -0700 Subject: [PATCH 0342/1165] checkpatch: update copyright dates Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 1eca1e14358..05b10d6bc58 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2,7 +2,7 @@ # (c) 2001, Dave Jones. (the file handling bit) # (c) 2005, Joel Schopp (the ugly bit) # (c) 2007,2008, Andy Whitcroft (new conditions, test suite) -# (c) 2008, Andy Whitcroft +# (c) 2008,2009, Andy Whitcroft # Licensed under the terms of the GNU GPL License version 2 use strict; -- GitLab From 2ceb532b04b7a3b8f534d11a6e839f8b8bff94c1 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 26 Oct 2009 16:50:14 -0700 Subject: [PATCH 0343/1165] checkpatch: fix false errors due to macro concatenation The macro concatenation (##) sequence can cause false errors when checking macro's. Checkpatch doesn't currently know about the operator. For example this line, + entry = (struct ftrace_raw_##call *)raw_data; \ is correct but it produces the following error, ERROR: need consistent spacing around '*' (ctx:WxB) + entry = (struct ftrace_raw_##call *)raw_data;\ ^ The line above doesn't have any spacing problems, and if you remove the macro concatenation sequence checkpatch doesn't give any errors. Extend identifier handling to include ## concatenation within the definition of an identifier. Reported-by: Daniel Walker Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 05b10d6bc58..cb2dac37aaf 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -130,7 +130,10 @@ if ($tree) { my $emitted_corrupt = 0; -our $Ident = qr{[A-Za-z_][A-Za-z\d_]*}; +our $Ident = qr{ + [A-Za-z_][A-Za-z\d_]* + (?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)* + }x; our $Storage = qr{extern|static|asmlinkage}; our $Sparse = qr{ __user| -- GitLab From 99423c2065b62fee41cdbd8da7e63bf1f8f9e9b0 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 26 Oct 2009 16:50:15 -0700 Subject: [PATCH 0344/1165] checkpatch: fix __attribute__ matching In the following code, union thread_union init_thread_union __attribute__((__section__(".data.init_task"))) = { INIT_THREAD_INFO(init_task) }; There is a non-conforming declaration. It should really be like the following, union thread_union init_thread_union __attribute__((__section__(".data.init_task"))) = { INIT_THREAD_INFO(init_task) }; However, checkpatch doesn't catch this right now because it doesn't correctly evaluate the "__attribute__". It is not at all clear that we care what preceeds an assignment style attribute when we find the open brace. Relax the test so we do not need to check the __attribute__. Reported-by: Daniel Walker Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index cb2dac37aaf..ba105a84839 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1669,8 +1669,8 @@ sub process { } # check for initialisation to aggregates open brace on the next line - if ($prevline =~ /$Declare\s*$Ident\s*=\s*$/ && - $line =~ /^.\s*{/) { + if ($line =~ /^.\s*{/ && + $prevline =~ /(?:^|[^=])=\s*$/) { ERROR("that open brace { should be on the previous line\n" . $hereprev); } -- GitLab From 2b474a1a566064b40bc7d9a45021ffbc4c894fa3 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 26 Oct 2009 16:50:16 -0700 Subject: [PATCH 0345/1165] checkpatch: fix false EXPORT_SYMBOL warning Ingo reported that the following lines triggered a false warning, static struct lock_class_key rcu_lock_key; struct lockdep_map rcu_lock_map = STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key); EXPORT_SYMBOL_GPL(rcu_lock_map); from kernel/rcutree.c , and the false warning looked like this, WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable +EXPORT_SYMBOL_GPL(rcu_lock_map); We actually should be checking the statement before the EXPORT_* for a mention of the exported object, and complain where it is not there. [akpm@linux-foundation.org: coding-style fixes] Cc: Ingo Molnar Cc: Paul E. McKenney Reported-by: Daniel Walker Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 48 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 39 insertions(+), 9 deletions(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index ba105a84839..88c4f6a5080 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1145,6 +1145,7 @@ sub process { # suppression flags my %suppress_ifbraces; my %suppress_whiletrailers; + my %suppress_export; # Pre-scan the patch sanitizing the lines. # Pre-scan the patch looking for any __setup documentation. @@ -1253,6 +1254,7 @@ sub process { %suppress_ifbraces = (); %suppress_whiletrailers = (); + %suppress_export = (); next; # track the line number as we move through the hunk, note that @@ -1428,13 +1430,22 @@ sub process { } # Check for potential 'bare' types - my ($stat, $cond, $line_nr_next, $remain_next, $off_next); + my ($stat, $cond, $line_nr_next, $remain_next, $off_next, + $realline_next); if ($realcnt && $line =~ /.\s*\S/) { ($stat, $cond, $line_nr_next, $remain_next, $off_next) = ctx_statement_block($linenr, $realcnt, 0); $stat =~ s/\n./\n /g; $cond =~ s/\n./\n /g; + # Find the real next line. + $realline_next = $line_nr_next; + if (defined $realline_next && + (!defined $lines[$realline_next - 1] || + substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) { + $realline_next++; + } + my $s = $stat; $s =~ s/{.*$//s; @@ -1695,21 +1706,40 @@ sub process { $line =~ s@//.*@@; $opline =~ s@//.*@@; -#EXPORT_SYMBOL should immediately follow its function closing }. - if (($line =~ /EXPORT_SYMBOL.*\((.*)\)/) || - ($line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { +# EXPORT_SYMBOL should immediately follow the thing it is exporting, consider +# the whole statement. +#print "APW <$lines[$realline_next - 1]>\n"; + if (defined $realline_next && + exists $lines[$realline_next - 1] && + !defined $suppress_export{$realline_next} && + ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ || + $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { my $name = $1; - if ($prevline !~ /(?: - ^.}| + if ($stat !~ /(?: + \n.}\s*$| ^.DEFINE_$Ident\(\Q$name\E\)| ^.DECLARE_$Ident\(\Q$name\E\)| ^.LIST_HEAD\(\Q$name\E\)| - ^.$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(| - \b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[) + ^.(?:$Storage\s+)?$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(| + \b\Q$name\E(?:\s+$Attribute)*\s*(?:;|=|\[|\() )/x) { - WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr); +#print "FOO A<$lines[$realline_next - 1]> stat<$stat> name<$name>\n"; + $suppress_export{$realline_next} = 2; + } else { + $suppress_export{$realline_next} = 1; } } + if (!defined $suppress_export{$linenr} && + $prevline =~ /^.\s*$/ && + ($line =~ /EXPORT_SYMBOL.*\((.*)\)/ || + $line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) { +#print "FOO B <$lines[$linenr - 1]>\n"; + $suppress_export{$linenr} = 2; + } + if (defined $suppress_export{$linenr} && + $suppress_export{$linenr} == 2) { + WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr); + } # check for external initialisers. if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) { -- GitLab From 5e8d8f6f2844d4a663415c660ab5cc92e2e2477d Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Mon, 26 Oct 2009 16:50:17 -0700 Subject: [PATCH 0346/1165] checkpatch: version 0.30 Signed-off-by: Andy Whitcroft Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/checkpatch.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 88c4f6a5080..bc4114f1ab3 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -10,7 +10,7 @@ use strict; my $P = $0; $P =~ s@.*/@@g; -my $V = '0.29'; +my $V = '0.30'; use Getopt::Long qw(:config no_auto_abbrev); -- GitLab From 246eb7f0ed1a8aeddec5313137767658f378949b Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 26 Oct 2009 16:50:18 -0700 Subject: [PATCH 0347/1165] cpuidle: always return with interrupts enabled In the case where cpuidle_idle_call() returns before changing state due to a need_resched(), it was returning with IRQs disabled. The idle path assumes that the platform specific idle code returns with interrupts enabled (although this too is undocumented AFAICT) and on ARM we have a WARN_ON(!(irqs_disabled()) when returning from the idle loop, so the user-visible effects were only a warning since interrupts were eventually re-enabled later. On x86, this same problem exists, but there is no WARN_ON() to detect it. As on ARM, the interrupts are eventually re-enabled, so I'm not sure of any actual bugs triggered by this. It's primarily a correctness/consistency fix. This patch ensures IRQs are (re)enabled before returning. Reported-by: Hemanth V Signed-off-by: Kevin Hilman Cc: Arjan van de Ven Cc: Len Brown Cc: Venkatesh Pallipadi Cc: Ingo Molnar Cc: "Rafael J. Wysocki" Tested-by: Martin Michlmayr Cc: [2.6.31.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/cpuidle/cpuidle.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index ad41f19b8e3..12fdd3987a3 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -76,8 +76,11 @@ static void cpuidle_idle_call(void) #endif /* ask the governor for the next state */ next_state = cpuidle_curr_governor->select(dev); - if (need_resched()) + if (need_resched()) { + local_irq_enable(); return; + } + target_state = &dev->states[next_state]; /* enter the state and update stats */ -- GitLab From a03018ff712e34dbebeae33c1b6b1306c2f9561b Mon Sep 17 00:00:00 2001 From: Pavel Herrmann Date: Mon, 26 Oct 2009 16:50:19 -0700 Subject: [PATCH 0348/1165] lis3: better support for hp 6730x MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I have learned that the 6730b and 6730s have different accelerometer orientation, and have modified the driver accordingly (diff attached), while dropping the wild guess for AMD based 6735 having the same orientation as Intel based 6730 (this is not true for any other related series/family, thus is not probable for 673x). Signed-off-by: Pavel Herrmann Signed-off-by: Éric Piel Cc: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/hp_accel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index 6679854c85b..2d3f95c21e0 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -197,7 +197,8 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left), AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted), AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd), - AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd), + AXIS_DMI_MATCH("NC6730b", "HP Compaq 6730b", xy_rotated_left_usd), + AXIS_DMI_MATCH("NC6730s", "HP Compaq 6730s", xy_swap), AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right), AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted), AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted), -- GitLab From af19611c4dad0dc5139a81d4a5ca352d21f904d6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=89ric=20Piel?= Date: Mon, 26 Oct 2009 16:50:20 -0700 Subject: [PATCH 0349/1165] lis3: add support for the HP EliteBook 8530w MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Correct orientation for HP EliteBook 8530w. Reported-by: Jörgen Jonssson Signed-off-by: Éric Piel Cc: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/hp_accel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index 2d3f95c21e0..1796b93a6e1 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -203,6 +203,7 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted), AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted), AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right), + AXIS_DMI_MATCH("NC693xx", "HP EliteBook 853", xy_swap), /* Intel-based HP Pavilion dv5 */ AXIS_DMI_MATCH2("HPDV5_I", PRODUCT_NAME, "HP Pavilion dv5", -- GitLab From 2545f038f4af0ff9945d47c10f988418dda50140 Mon Sep 17 00:00:00 2001 From: "Ian E. Morgan" Date: Mon, 26 Oct 2009 16:50:21 -0700 Subject: [PATCH 0350/1165] lis3: add support for the HP HDX 18 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I have an HP HDX 18 laptop, and noted that the configuration of the accelerometer needs to be x_inverted. Signed-off-by: Ian E. Morgan Signed-off-by: Éric Piel Cc: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/hwmon/hp_accel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c index 1796b93a6e1..be475e844c2 100644 --- a/drivers/hwmon/hp_accel.c +++ b/drivers/hwmon/hp_accel.c @@ -216,6 +216,7 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = { y_inverted), AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted), AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted), + AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted), { NULL, } /* Laptop models without axis info (yet): * "NC6910" "HP Compaq 6910" -- GitLab From c36987e2ef32e1bb7850379515f21187cba44754 Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Mon, 26 Oct 2009 16:50:23 -0700 Subject: [PATCH 0351/1165] mm: don't call pte_unmap() against an improper pte There are some places where we do like: pte = pte_map(); do { (do break in some conditions) } while (pte++, ...); pte_unmap(pte - 1); But if the loop breaks at the first loop, pte_unmap() unmaps invalid pte. This patch is a fix for this problem. Signed-off-by: Daisuke Nishimura Reviewd-by: KAMEZAWA Hiroyuki Acked-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index 7e91b5f9f69..60ea601e03e 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -641,6 +641,7 @@ static int copy_pte_range(struct mm_struct *dst_mm, struct mm_struct *src_mm, pmd_t *dst_pmd, pmd_t *src_pmd, struct vm_area_struct *vma, unsigned long addr, unsigned long end) { + pte_t *orig_src_pte, *orig_dst_pte; pte_t *src_pte, *dst_pte; spinlock_t *src_ptl, *dst_ptl; int progress = 0; @@ -654,6 +655,8 @@ again: src_pte = pte_offset_map_nested(src_pmd, addr); src_ptl = pte_lockptr(src_mm, src_pmd); spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING); + orig_src_pte = src_pte; + orig_dst_pte = dst_pte; arch_enter_lazy_mmu_mode(); do { @@ -677,9 +680,9 @@ again: arch_leave_lazy_mmu_mode(); spin_unlock(src_ptl); - pte_unmap_nested(src_pte - 1); + pte_unmap_nested(orig_src_pte); add_mm_rss(dst_mm, rss[0], rss[1]); - pte_unmap_unlock(dst_pte - 1, dst_ptl); + pte_unmap_unlock(orig_dst_pte, dst_ptl); cond_resched(); if (addr != end) goto again; @@ -1820,10 +1823,10 @@ static int apply_to_pte_range(struct mm_struct *mm, pmd_t *pmd, token = pmd_pgtable(*pmd); do { - err = fn(pte, token, addr, data); + err = fn(pte++, token, addr, data); if (err) break; - } while (pte++, addr += PAGE_SIZE, addr != end); + } while (addr += PAGE_SIZE, addr != end); arch_leave_lazy_mmu_mode(); -- GitLab From c896a2e0d80bbd5731f76609625a0cb7c9864a44 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 26 Oct 2009 16:50:23 -0700 Subject: [PATCH 0352/1165] frv: fix check on unsigned in do_signal() syscallno is unsigned Signed-off-by: Roel Kluin Signed-off-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/frv/kernel/signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c index 6b0a2b6fed6..0974c0ecc59 100644 --- a/arch/frv/kernel/signal.c +++ b/arch/frv/kernel/signal.c @@ -527,7 +527,7 @@ static void do_signal(void) no_signal: /* Did we come from a system call? */ - if (__frame->syscallno >= 0) { + if (__frame->syscallno != -1) { /* Restart the system call - no handlers present */ switch (__frame->gr8) { case -ERESTARTNOHAND: -- GitLab From 59a40e70458341b35d123b60aca416a1d97ebbe3 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Thu, 29 Oct 2009 16:25:50 +0100 Subject: [PATCH 0353/1165] dma-debug: Fix compile warning with PAE enabled When PAE is enabled in the kernel configuration the size of phys_addr_t differs from the size of a void pointer. The gcc prints a warning about that in dma-debug code. This patch fixes the warning by converting the output to unsigned long long instead of a pointer. Signed-off-by: Joerg Roedel --- lib/dma-debug.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 58a9f9fc609..ce6b7eabf67 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -819,9 +819,11 @@ static void check_unmap(struct dma_debug_entry *ref) err_printk(ref->dev, entry, "DMA-API: device driver frees " "DMA memory with different CPU address " "[device address=0x%016llx] [size=%llu bytes] " - "[cpu alloc address=%p] [cpu free address=%p]", + "[cpu alloc address=0x%016llx] " + "[cpu free address=0x%016llx]", ref->dev_addr, ref->size, - (void *)entry->paddr, (void *)ref->paddr); + (unsigned long long)entry->paddr, + (unsigned long long)ref->paddr); } if (ref->sg_call_ents && ref->type == dma_debug_sg && -- GitLab From ef7562b7f28319e6dd1f85dc1af87df2a7a84832 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 27 Oct 2009 15:35:35 +0000 Subject: [PATCH 0354/1165] dpt_i2o: Fix up copy*user Signed-off-by: Alan Cox Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/scsi/dpt_i2o.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index b6af63ca980..7d1aac31ec8 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -1918,6 +1918,10 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) } size = size>>16; size *= 4; + if (size > MAX_MESSAGE_SIZE) { + rcode = EINVAL; + goto cleanup; + } /* Copy in the user's I2O command */ if (copy_from_user (msg, user_msg, size)) { rcode = -EFAULT; -- GitLab From 575c9ed7798218dc923f319c0d78f0c25ca506b9 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 27 Oct 2009 15:35:55 +0000 Subject: [PATCH 0355/1165] ray_cs: Fix copy_from_user handling I've not touched the other stuff here but the word "locking" comes to mind. Signed-off-by: Alan Cox Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- drivers/net/wireless/ray_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 88cd58eb3b9..1c88c2ea59a 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -2879,7 +2879,7 @@ static int write_essid(struct file *file, const char __user *buffer, unsigned long count, void *data) { static char proc_essid[33]; - int len = count; + unsigned int len = count; if (len > 32) len = 32; -- GitLab From 657e12fd388899502d47f9f6f9d276ec9ced8add Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 29 Oct 2009 17:06:17 +0000 Subject: [PATCH 0356/1165] ARM: Fix sparsemem with SPARSEMEM_EXTREME enabled When SPARSEMEM_EXTREME is enabled, memory_present() wants to use bootmem to allocate data structures. However, we call memory_present() after declaring memory to bootmem, but before we've reserved areas. This leads to sparsemem data structures being overwritten later in the kernel's initialization (when slab initializes.) Signed-off-by: Russell King --- arch/arm/mm/init.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 40940d7ce4f..52c40d15567 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -273,7 +273,6 @@ static void __init bootmem_init_node(int node, struct meminfo *mi, struct membank *bank = &mi->bank[i]; if (!bank->highmem) free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank)); - memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); } /* @@ -370,6 +369,19 @@ int pfn_valid(unsigned long pfn) return 0; } EXPORT_SYMBOL(pfn_valid); + +static void arm_memory_present(struct meminfo *mi, int node) +{ +} +#else +static void arm_memory_present(struct meminfo *mi, int node) +{ + int i; + for_each_nodebank(i, mi, node) { + struct membank *bank = &mi->bank[i]; + memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank)); + } +} #endif static int __init meminfo_cmp(const void *_a, const void *_b) @@ -427,6 +439,12 @@ void __init bootmem_init(void) */ if (node == initrd_node) bootmem_reserve_initrd(node); + + /* + * Sparsemem tries to allocate bootmem in memory_present(), + * so must be done after the fixed reservations + */ + arm_memory_present(mi, node); } /* -- GitLab From df71dfd4ca01130f98d9dbfab76c440d72a177c6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 24 Oct 2009 22:36:36 +0100 Subject: [PATCH 0357/1165] ARM: Fix errata 411920 workarounds Errata 411920 indicates that any "invalidate entire instruction cache" operation can fail if the right conditions are present. This is not limited just to those operations in flush.c, but elsewhere. Place the workaround in the already existing __flush_icache_all() function instead. Signed-off-by: Russell King --- arch/arm/include/asm/cacheflush.h | 5 +++++ arch/arm/mm/context.c | 5 +---- arch/arm/mm/flush.c | 31 ++++++------------------------- 3 files changed, 12 insertions(+), 29 deletions(-) diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index fd03fb63a33..3d0cdd21b88 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -414,9 +414,14 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page static inline void __flush_icache_all(void) { +#ifdef CONFIG_ARM_ERRATA_411920 + extern void v6_icache_inval_all(void); + v6_icache_inval_all(); +#else asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" : : "r" (0)); +#endif } #define ARCH_HAS_FLUSH_ANON_PAGE diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 6bda76a4319..a9e22e31eaa 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -50,10 +50,7 @@ void __new_context(struct mm_struct *mm) isb(); flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { - asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n" - "mcr p15, 0, %0, c7, c5, 6 @ flush BTAC/BTB\n" - : - : "r" (0)); + __flush_icache_all(); dsb(); } } diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c index b27942909b2..7f294f307c8 100644 --- a/arch/arm/mm/flush.c +++ b/arch/arm/mm/flush.c @@ -18,10 +18,6 @@ #include "mm.h" -#ifdef CONFIG_ARM_ERRATA_411920 -extern void v6_icache_inval_all(void); -#endif - #ifdef CONFIG_CPU_CACHE_VIPT #define ALIAS_FLUSH_START 0xffff4000 @@ -35,16 +31,11 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr) flush_tlb_kernel_page(to); asm( "mcrr p15, 0, %1, %0, c14\n" - " mcr p15, 0, %2, c7, c10, 4\n" -#ifndef CONFIG_ARM_ERRATA_411920 - " mcr p15, 0, %2, c7, c5, 0\n" -#endif + " mcr p15, 0, %2, c7, c10, 4" : : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero) : "cc"); -#ifdef CONFIG_ARM_ERRATA_411920 - v6_icache_inval_all(); -#endif + __flush_icache_all(); } void flush_cache_mm(struct mm_struct *mm) @@ -57,16 +48,11 @@ void flush_cache_mm(struct mm_struct *mm) if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" - " mcr p15, 0, %0, c7, c10, 4\n" -#ifndef CONFIG_ARM_ERRATA_411920 - " mcr p15, 0, %0, c7, c5, 0\n" -#endif + " mcr p15, 0, %0, c7, c10, 4" : : "r" (0) : "cc"); -#ifdef CONFIG_ARM_ERRATA_411920 - v6_icache_inval_all(); -#endif + __flush_icache_all(); } } @@ -81,16 +67,11 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned if (cache_is_vipt_aliasing()) { asm( "mcr p15, 0, %0, c7, c14, 0\n" - " mcr p15, 0, %0, c7, c10, 4\n" -#ifndef CONFIG_ARM_ERRATA_411920 - " mcr p15, 0, %0, c7, c5, 0\n" -#endif + " mcr p15, 0, %0, c7, c10, 4" : : "r" (0) : "cc"); -#ifdef CONFIG_ARM_ERRATA_411920 - v6_icache_inval_all(); -#endif + __flush_icache_all(); } } -- GitLab From 837711f862bb71ac263837a0f0714dd8cc4ef7ea Mon Sep 17 00:00:00 2001 From: Coly Li Date: Fri, 16 Jan 2009 16:33:05 +0800 Subject: [PATCH 0358/1165] ocfs2: return f_fsid info in ocfs2_statfs() Currently the f_fsid of struct kstatfs returned from ocfs2_statfs() is undefined (vfs layer fills in 0 as default). Since in some conditions, f_fsid value might be used in a (f_fsid, ino) pair to uniquely identify a file, ocfs2 should return a unique defined f_fsid value from ocfs2_statfs(). Because uuid_str is the same on big or litlle endian machine, it's endian consistent to use osb->uuid_str to generate f_fsid value. Signed-off-by: Coly Li Cc: Sunil Mushran Cc: Mark Fasheh Signed-off-by: Joel Becker --- fs/ocfs2/super.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index 960673004df..14f47d2bfe0 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1647,6 +1647,10 @@ static int ocfs2_statfs(struct dentry *dentry, struct kstatfs *buf) buf->f_bavail = buf->f_bfree; buf->f_files = numbits; buf->f_ffree = freebits; + buf->f_fsid.val[0] = crc32_le(0, osb->uuid_str, OCFS2_VOL_UUID_LEN) + & 0xFFFFFFFFUL; + buf->f_fsid.val[1] = crc32_le(0, osb->uuid_str + OCFS2_VOL_UUID_LEN, + OCFS2_VOL_UUID_LEN) & 0xFFFFFFFFUL; brelse(bh); -- GitLab From 5a1eb5c4453207ad9e7f6e8ca4f8db289743c993 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 30 Oct 2009 15:03:54 +1100 Subject: [PATCH 0359/1165] powerpc: Cleanup Kconfig selection of hugetlbfs support Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/Kconfig | 4 ++++ fs/Kconfig | 2 +- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 10a0a5488a4..2ba14e77296 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -414,6 +414,10 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_POPULATES_NODE_MAP def_bool y +config SYS_SUPPORTS_HUGETLBFS + def_bool y + depends on PPC_BOOK3S_64 + source "mm/Kconfig" config ARCH_MEMORY_PROBE diff --git a/fs/Kconfig b/fs/Kconfig index 2126078a38e..64d44efad7a 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -135,7 +135,7 @@ config TMPFS_POSIX_ACL config HUGETLBFS bool "HugeTLB file system support" - depends on X86 || IA64 || PPC_BOOK3S_64 || SPARC64 || (S390 && 64BIT) || \ + depends on X86 || IA64 || SPARC64 || (S390 && 64BIT) || \ SYS_SUPPORTS_HUGETLBFS || BROKEN help hugetlbfs is a filesystem backing for HugeTLB pages, based on -- GitLab From 8fbd962e39517dfb2bfd363eba4b51cdfa299593 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 29 Oct 2009 13:42:41 +0000 Subject: [PATCH 0360/1165] e100: e100_phy_init() isolates selected PHY, causes 10 second boot delay A change in how PHYs are electrically isolated caused all PHYs to be isolated followed by reverting that isolation for the selected PHY. Unfortunately, isolating the selected PHY for even a short period of time can result in DHCP negotiation taking more than 10 seconds on certain embedded configurations delaying boot time as reported by Bernhard Kaindl. This patch reverts the change to how PHYs are isolated yet still works around the issue for 82552 needing the selected PHY's BMCR register to be written after the unused PHYs are isolated. This code is moved below the setting of nic->phy ID in order to do the 82552-specific workaround. Cc: Bernhard Kaindl Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e100.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 679965c2bb8..d19b0845970 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1426,19 +1426,31 @@ static int e100_phy_init(struct nic *nic) } else DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id); - /* Isolate all the PHY ids */ - for (addr = 0; addr < 32; addr++) - mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); - /* Select the discovered PHY */ - bmcr &= ~BMCR_ISOLATE; - mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr); - /* Get phy ID */ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1); id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2); nic->phy = (u32)id_hi << 16 | (u32)id_lo; DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy); + /* Select the phy and isolate the rest */ + for (addr = 0; addr < 32; addr++) { + if (addr != nic->mii.phy_id) { + mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE); + } else if (nic->phy != phy_82552_v) { + bmcr = mdio_read(netdev, addr, MII_BMCR); + mdio_write(netdev, addr, MII_BMCR, + bmcr & ~BMCR_ISOLATE); + } + } + /* + * Workaround for 82552: + * Clear the ISOLATE bit on selected phy_id last (mirrored on all + * other phy_id's) using bmcr value from addr discovery loop above. + */ + if (nic->phy == phy_82552_v) + mdio_write(netdev, nic->mii.phy_id, MII_BMCR, + bmcr & ~BMCR_ISOLATE); + /* Handle National tx phys */ #define NCS_PHY_MODEL_MASK 0xFFF0FFFF if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) { -- GitLab From f523d2114e93c559dbcf1b49d46b339fc0eda37a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 29 Oct 2009 13:45:45 +0000 Subject: [PATCH 0361/1165] e1000e: config PHY via software after resets On PCH-based (82577/82578) and some ICH8-based parts (82566) there is an issue with the hardware automatically configuring the PHY with contents from the EEPROM after the PHY is reset, so do the configuration by the driver instead. This was already similarly done for some 82566 parts in e1000_phy_hw_reset_ich8lan() but needs to be done after other resets, so move the PHY configuration code to its own function and call after all PHY resets. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/defines.h | 1 + drivers/net/e1000e/ich8lan.c | 295 ++++++++++++++++++++++++++--------- 2 files changed, 218 insertions(+), 78 deletions(-) diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index c0f185beb8b..4741ef9ec38 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -347,6 +347,7 @@ /* Extended Configuration Control and Size */ #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 #define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index b6388b9535f..095ffa56ed9 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -124,9 +124,20 @@ #define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */ +/* SMBus Address Phy Register */ +#define HV_SMB_ADDR PHY_REG(768, 26) +#define HV_SMB_ADDR_PEC_EN 0x0200 +#define HV_SMB_ADDR_VALID 0x0080 + +/* Strapping Option Register - RO */ +#define E1000_STRAP 0x0000C +#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000 +#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17 + /* OEM Bits Phy Register */ #define HV_OEM_BITS PHY_REG(768, 25) #define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */ +#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ #define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ @@ -208,6 +219,7 @@ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); +static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -793,6 +805,191 @@ static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) return 0; } +/** + * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration + * @hw: pointer to the HW structure + * + * SW should configure the LCD from the NVM extended configuration region + * as a workaround for certain parts. + **/ +static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask; + s32 ret_val; + u16 word_addr, reg_data, reg_addr, phy_page = 0; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + + /* + * Initialize the PHY from the NVM on ICH platforms. This + * is needed due to an issue where the NVM configuration is + * not properly autoloaded after power transitions. + * Therefore, after each PHY reset, we will load the + * configuration data out of the NVM manually. + */ + if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) || + (hw->mac.type == e1000_pchlan)) { + struct e1000_adapter *adapter = hw->adapter; + + /* Check if SW needs to configure the PHY */ + if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || + (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) || + (hw->mac.type == e1000_pchlan)) + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; + else + sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; + + data = er32(FEXTNVM); + if (!(data & sw_cfg_mask)) + goto out; + + /* Wait for basic configuration completes before proceeding */ + e1000_lan_init_done_ich8lan(hw); + + /* + * Make sure HW does not configure LCD from PHY + * extended configuration before SW configuration + */ + data = er32(EXTCNF_CTRL); + if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) + goto out; + + cnf_size = er32(EXTCNF_SIZE); + cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; + cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; + if (!cnf_size) + goto out; + + cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; + cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; + + if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && + (hw->mac.type == e1000_pchlan)) { + /* + * HW configures the SMBus address and LEDs when the + * OEM and LCD Write Enable bits are set in the NVM. + * When both NVM bits are cleared, SW will configure + * them instead. + */ + data = er32(STRAP); + data &= E1000_STRAP_SMBUS_ADDRESS_MASK; + reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; + reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, + reg_data); + if (ret_val) + goto out; + + data = er32(LEDCTL); + ret_val = e1000_write_phy_reg_hv_locked(hw, + HV_LED_CONFIG, + (u16)data); + if (ret_val) + goto out; + } + /* Configure LCD from extended configuration region. */ + + /* cnf_base_addr is in DWORD */ + word_addr = (u16)(cnf_base_addr << 1); + + for (i = 0; i < cnf_size; i++) { + ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1, + ®_data); + if (ret_val) + goto out; + + ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1), + 1, ®_addr); + if (ret_val) + goto out; + + /* Save off the PHY page for future writes. */ + if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { + phy_page = reg_data; + continue; + } + + reg_addr &= PHY_REG_MASK; + reg_addr |= phy_page; + + ret_val = phy->ops.write_phy_reg_locked(hw, + (u32)reg_addr, + reg_data); + if (ret_val) + goto out; + } + } + +out: + hw->phy.ops.release_phy(hw); + return ret_val; +} + +/** + * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration + * @hw: pointer to the HW structure + * @d0_state: boolean if entering d0 or d3 device state + * + * SW will configure Gbe Disable and LPLU based on the NVM. The four bits are + * collectively called OEM bits. The OEM Write Enable bit and SW Config bit + * in NVM determines whether HW should configure LPLU and Gbe Disable. + **/ +static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) +{ + s32 ret_val = 0; + u32 mac_reg; + u16 oem_reg; + + if (hw->mac.type != e1000_pchlan) + return ret_val; + + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + return ret_val; + + mac_reg = er32(EXTCNF_CTRL); + if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) + goto out; + + mac_reg = er32(FEXTNVM); + if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M)) + goto out; + + mac_reg = er32(PHY_CTRL); + + ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg); + if (ret_val) + goto out; + + oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU); + + if (d0_state) { + if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE) + oem_reg |= HV_OEM_BITS_GBE_DIS; + + if (mac_reg & E1000_PHY_CTRL_D0A_LPLU) + oem_reg |= HV_OEM_BITS_LPLU; + } else { + if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE) + oem_reg |= HV_OEM_BITS_GBE_DIS; + + if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU) + oem_reg |= HV_OEM_BITS_LPLU; + } + /* Restart auto-neg to activate the bits */ + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg); + +out: + hw->phy.ops.release_phy(hw); + + return ret_val; +} + + /** * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be * done after every PHY reset. @@ -882,11 +1079,8 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) { - struct e1000_phy_info *phy = &hw->phy; - u32 i; - u32 data, cnf_size, cnf_base_addr, sw_cfg_mask; - s32 ret_val; - u16 reg, word_addr, reg_data, reg_addr, phy_page = 0; + s32 ret_val = 0; + u16 reg; ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) @@ -905,81 +1099,16 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pchlan) e1e_rphy(hw, BM_WUC, ®); - /* - * Initialize the PHY from the NVM on ICH platforms. This - * is needed due to an issue where the NVM configuration is - * not properly autoloaded after power transitions. - * Therefore, after each PHY reset, we will load the - * configuration data out of the NVM manually. - */ - if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) { - struct e1000_adapter *adapter = hw->adapter; - - /* Check if SW needs configure the PHY */ - if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) || - (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M)) - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M; - else - sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; - - data = er32(FEXTNVM); - if (!(data & sw_cfg_mask)) - return 0; - - /* Wait for basic configuration completes before proceeding */ - e1000_lan_init_done_ich8lan(hw); - - /* - * Make sure HW does not configure LCD from PHY - * extended configuration before SW configuration - */ - data = er32(EXTCNF_CTRL); - if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) - return 0; - - cnf_size = er32(EXTCNF_SIZE); - cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK; - cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT; - if (!cnf_size) - return 0; - - cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; - cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - - /* Configure LCD from extended configuration region. */ - - /* cnf_base_addr is in DWORD */ - word_addr = (u16)(cnf_base_addr << 1); - - for (i = 0; i < cnf_size; i++) { - ret_val = e1000_read_nvm(hw, - (word_addr + i * 2), - 1, - ®_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_nvm(hw, - (word_addr + i * 2 + 1), - 1, - ®_addr); - if (ret_val) - return ret_val; - - /* Save off the PHY page for future writes. */ - if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) { - phy_page = reg_data; - continue; - } - - reg_addr |= phy_page; + /* Configure the LCD with the extended configuration region in NVM */ + ret_val = e1000_sw_lcd_config_ich8lan(hw); + if (ret_val) + goto out; - ret_val = e1e_wphy(hw, (u32)reg_addr, reg_data); - if (ret_val) - return ret_val; - } - } + /* Configure the LCD with the OEM bits in NVM */ + if (hw->mac.type == e1000_pchlan) + ret_val = e1000_oem_bits_config_ich8lan(hw, true); +out: return 0; } @@ -2386,6 +2515,15 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pchlan) e1e_rphy(hw, BM_WUC, ®); + ret_val = e1000_sw_lcd_config_ich8lan(hw); + if (ret_val) + goto out; + + if (hw->mac.type == e1000_pchlan) { + ret_val = e1000_oem_bits_config_ich8lan(hw, true); + if (ret_val) + goto out; + } /* * For PCH, this write will make sure that any noise * will be detected as a CRC error and be dropped rather than show up @@ -2404,6 +2542,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) if (hw->mac.type == e1000_pchlan) ret_val = e1000_hv_phy_workarounds_ich8lan(hw); +out: return ret_val; } -- GitLab From 1d5846b9216665d0ae743bf351d0b8fa90c40523 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 29 Oct 2009 13:46:05 +0000 Subject: [PATCH 0362/1165] e1000e: rework disable K1 at 1000Mbps for 82577/82578 This patch reworks a previous workaround (commit 7d3cabbcc) for an issue in hardware where noise on the interconnect between the MAC and PHY could be generated by a lower power mode (K1) at 1000Mbps resulting in bad packets. Disable K1 while at 1000 Mbps but keep it enabled for 10/100Mbps and when the cable is disconnected. The original version of this workaround was found to be incomplete. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/defines.h | 1 + drivers/net/e1000e/e1000.h | 14 +++ drivers/net/e1000e/hw.h | 1 + drivers/net/e1000e/ich8lan.c | 187 +++++++++++++++++++++++++++++++---- drivers/net/e1000e/phy.c | 15 +-- 5 files changed, 190 insertions(+), 28 deletions(-) diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 4741ef9ec38..1190167a8b3 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -76,6 +76,7 @@ /* Extended Device Control */ #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */ #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 405a144ebca..189dfa2d6c7 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -141,6 +141,20 @@ struct e1000_info; #define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */ #define HV_TNCRS_LOWER PHY_REG(778, 30) +/* BM PHY Copper Specific Status */ +#define BM_CS_STATUS 17 +#define BM_CS_STATUS_LINK_UP 0x0400 +#define BM_CS_STATUS_RESOLVED 0x0800 +#define BM_CS_STATUS_SPEED_MASK 0xC000 +#define BM_CS_STATUS_SPEED_1000 0x8000 + +/* 82577 Mobile Phy Status Register */ +#define HV_M_STATUS 26 +#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000 +#define HV_M_STATUS_SPEED_MASK 0x0300 +#define HV_M_STATUS_SPEED_1000 0x0200 +#define HV_M_STATUS_LINK_UP 0x0040 + enum e1000_boards { board_82571, board_82572, diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 7b05cf47f7f..aaea41ef794 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -903,6 +903,7 @@ struct e1000_shadow_ram { struct e1000_dev_spec_ich8lan { bool kmrn_lock_loss_workaround_enabled; struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS]; + bool nvm_k1_enabled; }; struct e1000_hw { diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 095ffa56ed9..51ddb04ab19 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -140,6 +140,9 @@ #define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */ #define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */ +#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */ +#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */ + /* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ union ich8_hws_flash_status { @@ -220,6 +223,8 @@ static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); +static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -495,14 +500,6 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) goto out; } - if (hw->mac.type == e1000_pchlan) { - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_K1_CONFIG, - E1000_KMRNCTRLSTA_K1_ENABLE); - if (ret_val) - goto out; - } - /* * First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -512,6 +509,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) if (ret_val) goto out; + if (hw->mac.type == e1000_pchlan) { + ret_val = e1000_k1_gig_workaround_hv(hw, link); + if (ret_val) + goto out; + } + if (!link) goto out; /* No link detected */ @@ -928,6 +931,141 @@ out: return ret_val; } +/** + * e1000_k1_gig_workaround_hv - K1 Si workaround + * @hw: pointer to the HW structure + * @link: link up bool flag + * + * If K1 is enabled for 1Gbps, the MAC might stall when transitioning + * from a lower speed. This workaround disables K1 whenever link is at 1Gig + * If link is down, the function will restore the default K1 setting located + * in the NVM. + **/ +static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) +{ + s32 ret_val = 0; + u16 status_reg = 0; + bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled; + + if (hw->mac.type != e1000_pchlan) + goto out; + + /* Wrap the whole flow with the sw flag */ + ret_val = hw->phy.ops.acquire_phy(hw); + if (ret_val) + goto out; + + /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */ + if (link) { + if (hw->phy.type == e1000_phy_82578) { + ret_val = hw->phy.ops.read_phy_reg_locked(hw, + BM_CS_STATUS, + &status_reg); + if (ret_val) + goto release; + + status_reg &= BM_CS_STATUS_LINK_UP | + BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_MASK; + + if (status_reg == (BM_CS_STATUS_LINK_UP | + BM_CS_STATUS_RESOLVED | + BM_CS_STATUS_SPEED_1000)) + k1_enable = false; + } + + if (hw->phy.type == e1000_phy_82577) { + ret_val = hw->phy.ops.read_phy_reg_locked(hw, + HV_M_STATUS, + &status_reg); + if (ret_val) + goto release; + + status_reg &= HV_M_STATUS_LINK_UP | + HV_M_STATUS_AUTONEG_COMPLETE | + HV_M_STATUS_SPEED_MASK; + + if (status_reg == (HV_M_STATUS_LINK_UP | + HV_M_STATUS_AUTONEG_COMPLETE | + HV_M_STATUS_SPEED_1000)) + k1_enable = false; + } + + /* Link stall fix for link up */ + ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + 0x0100); + if (ret_val) + goto release; + + } else { + /* Link stall fix for link down */ + ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + 0x4100); + if (ret_val) + goto release; + } + + ret_val = e1000_configure_k1_ich8lan(hw, k1_enable); + +release: + hw->phy.ops.release_phy(hw); +out: + return ret_val; +} + +/** + * e1000_configure_k1_ich8lan - Configure K1 power state + * @hw: pointer to the HW structure + * @enable: K1 state to configure + * + * Configure the K1 power state based on the provided parameter. + * Assumes semaphore already acquired. + * + * Success returns 0, Failure returns -E1000_ERR_PHY (-2) + **/ +static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) +{ + s32 ret_val = 0; + u32 ctrl_reg = 0; + u32 ctrl_ext = 0; + u32 reg = 0; + u16 kmrn_reg = 0; + + ret_val = e1000e_read_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + &kmrn_reg); + if (ret_val) + goto out; + + if (k1_enable) + kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE; + else + kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE; + + ret_val = e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg); + if (ret_val) + goto out; + + udelay(20); + ctrl_ext = er32(CTRL_EXT); + ctrl_reg = er32(CTRL); + + reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); + reg |= E1000_CTRL_FRCSPD; + ew32(CTRL, reg); + + ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS); + udelay(20); + ew32(CTRL, ctrl_reg); + ew32(CTRL_EXT, ctrl_ext); + udelay(20); + +out: + return ret_val; +} + /** * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration * @hw: pointer to the HW structure @@ -1030,10 +1168,20 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) ret_val = hw->phy.ops.acquire_phy(hw); if (ret_val) return ret_val; + hw->phy.addr = 1; - e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); + if (ret_val) + goto out; hw->phy.ops.release_phy(hw); + /* + * Configure the K1 Si workaround during phy reset assuming there is + * link so that it disables K1 if link is in 1Gbps. + */ + ret_val = e1000_k1_gig_workaround_hv(hw, true); + +out: return ret_val; } @@ -2435,6 +2583,7 @@ static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) { + struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; u16 reg; u32 ctrl, icr, kab; s32 ret_val; @@ -2470,6 +2619,18 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ew32(PBS, E1000_PBS_16K); } + if (hw->mac.type == e1000_pchlan) { + /* Save the NVM K1 bit setting*/ + ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, ®); + if (ret_val) + return ret_val; + + if (reg & E1000_NVM_K1_ENABLE) + dev_spec->nvm_k1_enabled = true; + else + dev_spec->nvm_k1_enabled = false; + } + ctrl = er32(CTRL); if (!e1000_check_reset_block(hw)) { @@ -2847,14 +3008,6 @@ static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed, if (ret_val) return ret_val; - if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) { - ret_val = e1000e_write_kmrn_reg(hw, - E1000_KMRNCTRLSTA_K1_CONFIG, - E1000_KMRNCTRLSTA_K1_DISABLE); - if (ret_val) - return ret_val; - } - if ((hw->mac.type == e1000_ich8lan) && (hw->phy.type == e1000_phy_igp_3) && (*speed == SPEED_1000)) { diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index f9d33ab05e9..03175b3a2c9 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -95,13 +95,6 @@ static const u16 e1000_igp_2_cable_length_table[] = /* BM PHY Copper Specific Control 1 */ #define BM_CS_CTRL1 16 -/* BM PHY Copper Specific Status */ -#define BM_CS_STATUS 17 -#define BM_CS_STATUS_LINK_UP 0x0400 -#define BM_CS_STATUS_RESOLVED 0x0800 -#define BM_CS_STATUS_SPEED_MASK 0xC000 -#define BM_CS_STATUS_SPEED_1000 0x8000 - #define HV_MUX_DATA_CTRL PHY_REG(776, 16) #define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400 #define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004 @@ -563,7 +556,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) } /** - * e1000_read_kmrn_reg_locked - Read kumeran register + * e1000e_read_kmrn_reg_locked - Read kumeran register * @hw: pointer to the HW structure * @offset: register offset to be read * @data: pointer to the read data @@ -572,7 +565,7 @@ s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) * information retrieved is stored in data. * Assumes semaphore already acquired. **/ -s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) +s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) { return __e1000_read_kmrn_reg(hw, offset, data, true); } @@ -631,7 +624,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) } /** - * e1000_write_kmrn_reg_locked - Write kumeran register + * e1000e_write_kmrn_reg_locked - Write kumeran register * @hw: pointer to the HW structure * @offset: register offset to write to * @data: data to write at register offset @@ -639,7 +632,7 @@ s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) * Write the data to PHY register at the offset using the kumeran interface. * Assumes semaphore already acquired. **/ -s32 e1000_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) +s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) { return __e1000_write_kmrn_reg(hw, offset, data, true); } -- GitLab From 14d18a81b5171d4433e41129619c75748b4f4d26 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 29 Oct 2009 00:10:37 +0000 Subject: [PATCH 0363/1165] net: fix kmemcheck annotations struct sk_buff kmemcheck annotations enlarged this structure by 8/16 bytes Fix this by moving 'protocol' inside flags1 bitfield, and queue_mapping inside flags2 bitfield. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index df7b23ac66e..6aebfceca3e 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -354,8 +354,8 @@ struct sk_buff { ipvs_property:1, peeked:1, nf_trace:1; + __be16 protocol:16; kmemcheck_bitfield_end(flags1); - __be16 protocol; void (*destructor)(struct sk_buff *skb); #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE) @@ -367,7 +367,6 @@ struct sk_buff { #endif int iif; - __u16 queue_mapping; #ifdef CONFIG_NET_SCHED __u16 tc_index; /* traffic control index */ #ifdef CONFIG_NET_CLS_ACT @@ -376,6 +375,7 @@ struct sk_buff { #endif kmemcheck_bitfield_begin(flags2); + __u16 queue_mapping:16; #ifdef CONFIG_IPV6_NDISC_NODETYPE __u8 ndisc_nodetype:2; #endif -- GitLab From b0c110ca8e89f2c9cd52ec7fb1b98c5b7aa78496 Mon Sep 17 00:00:00 2001 From: jamal Date: Sun, 18 Oct 2009 02:12:33 +0000 Subject: [PATCH 0364/1165] net: Fix RPF to work with policy routing Policy routing is not looked up by mark on reverse path filtering. This fixes it. Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- include/net/ip_fib.h | 3 ++- net/ipv4/fib_frontend.c | 5 ++++- net/ipv4/route.c | 8 ++++---- 3 files changed, 10 insertions(+), 6 deletions(-) diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index ef91fe924ba..4d22fabc771 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -210,7 +210,8 @@ extern struct fib_table *fib_get_table(struct net *net, u32 id); extern const struct nla_policy rtm_ipv4_policy[]; extern void ip_fib_init(void); extern int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif, - struct net_device *dev, __be32 *spec_dst, u32 *itag); + struct net_device *dev, __be32 *spec_dst, + u32 *itag, u32 mark); extern void fib_select_default(struct net *net, const struct flowi *flp, struct fib_result *res); diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index e2f95059256..aa00398be80 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -229,14 +229,17 @@ unsigned int inet_dev_addr_type(struct net *net, const struct net_device *dev, */ int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif, - struct net_device *dev, __be32 *spec_dst, u32 *itag) + struct net_device *dev, __be32 *spec_dst, + u32 *itag, u32 mark) { struct in_device *in_dev; struct flowi fl = { .nl_u = { .ip4_u = { .daddr = src, .saddr = dst, .tos = tos } }, + .mark = mark, .iif = oif }; + struct fib_result res; int no_addr, rpf; int ret; diff --git a/net/ipv4/route.c b/net/ipv4/route.c index bb419925202..5b1050a5d87 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1854,7 +1854,7 @@ static int ip_route_input_mc(struct sk_buff *skb, __be32 daddr, __be32 saddr, goto e_inval; spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK); } else if (fib_validate_source(saddr, 0, tos, 0, - dev, &spec_dst, &itag) < 0) + dev, &spec_dst, &itag, 0) < 0) goto e_inval; rth = dst_alloc(&ipv4_dst_ops); @@ -1967,7 +1967,7 @@ static int __mkroute_input(struct sk_buff *skb, err = fib_validate_source(saddr, daddr, tos, FIB_RES_OIF(*res), - in_dev->dev, &spec_dst, &itag); + in_dev->dev, &spec_dst, &itag, skb->mark); if (err < 0) { ip_handle_martian_source(in_dev->dev, in_dev, skb, daddr, saddr); @@ -2141,7 +2141,7 @@ static int ip_route_input_slow(struct sk_buff *skb, __be32 daddr, __be32 saddr, int result; result = fib_validate_source(saddr, daddr, tos, net->loopback_dev->ifindex, - dev, &spec_dst, &itag); + dev, &spec_dst, &itag, skb->mark); if (result < 0) goto martian_source; if (result) @@ -2170,7 +2170,7 @@ brd_input: spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK); else { err = fib_validate_source(saddr, 0, tos, 0, dev, &spec_dst, - &itag); + &itag, skb->mark); if (err < 0) goto martian_source; if (err) -- GitLab From 18eb0893c12898253c18ba23b51a6ea9a07ba4c7 Mon Sep 17 00:00:00 2001 From: roel kluin Date: Sat, 3 Oct 2009 11:26:55 +0000 Subject: [PATCH 0365/1165] ibmtr: possible Read buffer overflow? Prevent read outside array bounds. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- drivers/net/tokenring/ibmtr.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index 525bbc5b9c9..6a3c7510afd 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -1143,9 +1143,16 @@ static void dir_open_adapter (struct net_device *dev) } else { char **prphase = printphase; char **prerror = printerror; + int pnr = err / 16 - 1; + int enr = err % 16 - 1; DPRINTK("TR Adapter misc open failure, error code = "); - printk("0x%x, Phase: %s, Error: %s\n", - err, prphase[err/16 -1], prerror[err%16 -1]); + if (pnr < 0 || pnr >= ARRAY_SIZE(printphase) || + enr < 0 || + enr >= ARRAY_SIZE(printerror)) + printk("0x%x, invalid Phase/Error.", err); + else + printk("0x%x, Phase: %s, Error: %s\n", err, + prphase[pnr], prerror[enr]); printk(" retrying after %ds delay...\n", TR_RETRY_INTERVAL/HZ); } -- GitLab From 207d6e8760c6a3323bf5ab098dbaa5c9d03bda83 Mon Sep 17 00:00:00 2001 From: Raimonds Cicans Date: Mon, 26 Oct 2009 10:52:37 +0000 Subject: [PATCH 0366/1165] r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames r8169 card drop incoming VLAN tagged MTU byte large jumbo frames It looks to compare current and maximal packet sizes hardware use '<' operator, not '<='. Bug introduced by commit fdd7b4c3302c93f6833e338903ea77245eb510b4 ("r8169: fix crash when large packets are received") Signed-off-by: Raimonds Cicans Signed-off-by: David S. Miller --- drivers/net/r8169.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index f98ef523f52..fa493567848 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3379,7 +3379,7 @@ static u16 rtl_rw_cpluscmd(void __iomem *ioaddr) static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz) { /* Low hurts. Let's disable the filtering. */ - RTL_W16(RxMaxSize, rx_buf_sz); + RTL_W16(RxMaxSize, rx_buf_sz + 1); } static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version) -- GitLab From 63ca2d74ea4f9c7a7ac082c915609a7b224908e7 Mon Sep 17 00:00:00 2001 From: Ken Kawasaki Date: Sat, 17 Oct 2009 15:39:20 +0000 Subject: [PATCH 0367/1165] pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card pcnet_cs,serial_cs: add cis of PreMax ethernet pcmcia card, and some Sierra Wireless serial card(AC555, AC7xx, AC8xx). use PROD_ID for AC7xx, because MANF_ID of AC7xx and AC8xx are the same. Signed-off-by: Ken Kawasaki Signed-off-by: David S. Miller --- drivers/net/pcmcia/pcnet_cs.c | 2 +- drivers/serial/serial_cs.c | 8 ++++---- firmware/Makefile | 6 ++++-- firmware/WHENCE | 4 ++++ firmware/cis/PE-200.cis.ihex | 9 +++++++++ firmware/cis/SW_555_SER.cis.ihex | 12 ++++++++++++ firmware/cis/SW_7xx_SER.cis.ihex | 13 +++++++++++++ firmware/cis/SW_8xx_SER.cis.ihex | 13 +++++++++++++ 8 files changed, 60 insertions(+), 7 deletions(-) create mode 100644 firmware/cis/PE-200.cis.ihex create mode 100644 firmware/cis/SW_555_SER.cis.ihex create mode 100644 firmware/cis/SW_7xx_SER.cis.ihex create mode 100644 firmware/cis/SW_8xx_SER.cis.ihex diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index bd3447f0490..94c9ad2746b 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1760,7 +1760,7 @@ static struct pcmcia_device_id pcnet_ids[] = { PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"), + PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"), PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b), PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0", diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index ff4617e2142..7c7914f5fa0 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -879,10 +879,10 @@ static struct pcmcia_device_id serial_ids[] = { PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"), PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"), - PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ - PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */ + PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */ + PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */ PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"), PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"), diff --git a/firmware/Makefile b/firmware/Makefile index a6c7c3e47e4..f4ca0c7eb51 100644 --- a/firmware/Makefile +++ b/firmware/Makefile @@ -69,11 +69,13 @@ fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \ fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \ cis/DP83903.cis cis/NE2K.cis \ - cis/tamarack.cis + cis/tamarack.cis cis/PE-200.cis fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \ - cis/COMpad2.cis cis/COMpad4.cis + cis/COMpad2.cis cis/COMpad4.cis \ + cis/SW_555_SER.cis cis/SW_7xx_SER.cis \ + cis/SW_8xx_SER.cis fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \ advansys/3550.bin advansys/38C0800.bin diff --git a/firmware/WHENCE b/firmware/WHENCE index c437e14f0b1..7a8adc06eb3 100644 --- a/firmware/WHENCE +++ b/firmware/WHENCE @@ -600,6 +600,7 @@ File: cis/LA-PCM.cis cis/DP83903.cis cis/NE2K.cis cis/tamarack.cis + cis/PE-200.cis Licence: GPL @@ -633,6 +634,9 @@ File: cis/MT5634ZLX.cis cis/RS-COM-2P.cis cis/COMpad2.cis cis/COMpad4.cis + cis/SW_555_SER.cis + cis/SW_7xx_SER.cis + cis/SW_8xx_SER.cis Licence: GPL diff --git a/firmware/cis/PE-200.cis.ihex b/firmware/cis/PE-200.cis.ihex new file mode 100644 index 00000000000..e6dbdab6eb7 --- /dev/null +++ b/firmware/cis/PE-200.cis.ihex @@ -0,0 +1,9 @@ +:1000000001030000FF151E0401504D582020200060 +:1000100050452D3230300045544845524E4554002D +:1000200052303100FF210206031A050101000101CF +:100030001B0EC181190155E051000F100F30FFFF59 +:040040001400FF00A9 +:00000001FF +# +# Replacement CIS for PE-200 ethernet card +# diff --git a/firmware/cis/SW_555_SER.cis.ihex b/firmware/cis/SW_555_SER.cis.ihex new file mode 100644 index 00000000000..9b9348acee7 --- /dev/null +++ b/firmware/cis/SW_555_SER.cis.ihex @@ -0,0 +1,12 @@ +:100000000101FF17034100FF20043F0110072102F7 +:100010000200152A070053696572726120576972E0 +:10002000656C657373004169724361726420353594 +:1000300035004135353500526576203100FF1A050F +:1000400001030007731B0BE00118A360F8030730DE +:10005000BC3F1B08A10108A360F802071B08A2010E +:1000600008A360E803071B08A30108A360E80207D0 +:0A0070001B04A40108231400FF0084 +:00000001FF +# +# Replacement CIS for AC555 provided by Sierra Wireless +# diff --git a/firmware/cis/SW_7xx_SER.cis.ihex b/firmware/cis/SW_7xx_SER.cis.ihex new file mode 100644 index 00000000000..11e44ad8643 --- /dev/null +++ b/firmware/cis/SW_7xx_SER.cis.ihex @@ -0,0 +1,13 @@ +:100000000101FF17034100FF2004920110072102A4 +:1000100002001537070053696572726120576972D3 +:10002000656C6573730041433731302F4143373579 +:10003000300047505253204E6574776F726B2041E9 +:1000400064617074657200523100FF1A050103008B +:1000500007731B10E00119784D555D25A360F80367 +:100060000730BC861B08A10108A360F802071B0823 +:10007000A20108A360E803071B08A30108A360E826 +:0C00800002071B04A40108231400FF0069 +:00000001FF +# +# Replacement CIS for AC7xx provided by Sierra Wireless +# diff --git a/firmware/cis/SW_8xx_SER.cis.ihex b/firmware/cis/SW_8xx_SER.cis.ihex new file mode 100644 index 00000000000..bbcfe634832 --- /dev/null +++ b/firmware/cis/SW_8xx_SER.cis.ihex @@ -0,0 +1,13 @@ +:100000000101FF17034100FF2004920110072102A4 +:100010000200152F070053696572726120576972DB +:10002000656C657373004143383530003347204EAB +:100030006574776F726B20416461707465720052F1 +:100040003100FF1A0501030007731B10E001197846 +:100050004D555D25A360F8480730BC861B08A101FB +:1000600008A360F847071B08A20108A360E8480737 +:100070001B08A30108A360E847071B04A401082389 +:040080001400FF0069 +:00000001FF +# +# Replacement CIS for AC8xx provided by Sierra Wireless +# -- GitLab From 3b826386d376e5545d2e92b2da5ebd965cafae97 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Fri, 30 Oct 2009 09:27:07 +0100 Subject: [PATCH 0368/1165] xfs: free temporary cursor in xfs_dialloc Commit bd169565993b39b9b4b102cdac8b13e0a259ce2f seems to have a slight regression where this code path: if (!--searchdistance) { /* * Not in range - save last search * location and allocate a new inode */ ... goto newino; } doesn't free the temporary cursor (tcur) that got dup'd in this function. This leaks an item in the xfs_btree_cur zone, and it's caught on module unload: =========================================================== BUG xfs_btree_cur: Objects remaining on kmem_cache_close() ----------------------------------------------------------- It seems like maybe a single free at the end of the function might be cleaner, but for now put a del_cursor right in this code block similar to the handling in the rest of the function. Signed-off-by: Eric Sandeen Signed-off-by: Christoph Hellwig --- fs/xfs/xfs_ialloc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index ab64f3efb43..0785797db82 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -880,6 +880,7 @@ nextag: * Not in range - save last search * location and allocate a new inode */ + xfs_btree_del_cursor(tcur, XFS_BTREE_NOERROR); pag->pagl_leftrec = trec.ir_startino; pag->pagl_rightrec = rec.ir_startino; pag->pagl_pagino = pagino; -- GitLab From c7ff91d722e44c98504e6e2c357b47e1988dfbbd Mon Sep 17 00:00:00 2001 From: Ryota Yamauchi Date: Fri, 30 Oct 2009 09:27:44 +0100 Subject: [PATCH 0369/1165] xfs: fix xfs_quota remove error The xfs_quota returns ENOSYS when remove command is executed. Reproducable with following steps. # mount -t xfs -o uquota /dev/sda7 /mnt/mp1 # xfs_quota -x -c off -c remove XFS_QUOTARM: Function not implemented. The remove command is allowed during quotaoff, but xfs_fs_set_xstate() checks whether quota is running, and it leads to ENOSYS. To solve this problem, add a check for X_QUOTARM. Signed-off-by: Ryota Yamauchi Signed-off-by: Utako Kusaka Signed-off-by: Christoph Hellwig --- fs/xfs/linux-2.6/xfs_quotaops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/xfs/linux-2.6/xfs_quotaops.c b/fs/xfs/linux-2.6/xfs_quotaops.c index cb6e2cca214..13cc7b524d6 100644 --- a/fs/xfs/linux-2.6/xfs_quotaops.c +++ b/fs/xfs/linux-2.6/xfs_quotaops.c @@ -80,7 +80,7 @@ xfs_fs_set_xstate( if (sb->s_flags & MS_RDONLY) return -EROFS; - if (!XFS_IS_QUOTA_RUNNING(mp)) + if (op != Q_XQUOTARM && !XFS_IS_QUOTA_RUNNING(mp)) return -ENOSYS; if (!capable(CAP_SYS_ADMIN)) return -EPERM; -- GitLab From 97609458ce972180172ae2cec0483451820e6a41 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 15 Oct 2009 10:22:54 +0800 Subject: [PATCH 0370/1165] ALSA: SND_CS5535AUDIO: Remove the X86 platform dependency SND_CS5535AUDIO is available on Loongson(MIPS compatible) family machines, and checked it with ARCH=x86_64, no relative compiling warnings & errors, so, remove the platform dependency directly. Reported-by: rixed@happyleptic.org Acked-by: Andres Salomon Signed-off-by: Wu Zhangjin Signed-off-by: Takashi Iwai --- sound/pci/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index fb5ee3cc396..75c602b5b13 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -259,7 +259,6 @@ config SND_CS5530 config SND_CS5535AUDIO tristate "CS5535/CS5536 Audio" - depends on X86 && !X86_64 select SND_PCM select SND_AC97_CODEC help -- GitLab From b71207e9dc044b30d8b5d7f1c2290ba14563f05c Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Fri, 30 Oct 2009 11:51:24 +0100 Subject: [PATCH 0371/1165] ALSA: pcsp - Fix nforce workaround The attached patch fixes the problems introduced in this commit: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=eea0579fc85e64e9f05361d5aacf496fe7a151aa - Fix nForce workaround by honouring the pointer_update var - Revert "ns" to u64, as per the hrtimer API - Revert to the zero-delay timer startup, since I can't reproduce any problem with it (please, give me the hint!) Signed-off-by: Stas Sergeev Signed-off-by: Takashi Iwai --- sound/drivers/pcsp/pcsp_lib.c | 65 +++++++++++++++++---------------- sound/drivers/pcsp/pcsp_mixer.c | 2 +- 2 files changed, 35 insertions(+), 32 deletions(-) diff --git a/sound/drivers/pcsp/pcsp_lib.c b/sound/drivers/pcsp/pcsp_lib.c index 84cc2658c05..e1145ac6e90 100644 --- a/sound/drivers/pcsp/pcsp_lib.c +++ b/sound/drivers/pcsp/pcsp_lib.c @@ -39,25 +39,20 @@ static DECLARE_TASKLET(pcsp_pcm_tasklet, pcsp_call_pcm_elapsed, 0); /* write the port and returns the next expire time in ns; * called at the trigger-start and in hrtimer callback */ -static unsigned long pcsp_timer_update(struct hrtimer *handle) +static u64 pcsp_timer_update(struct snd_pcsp *chip) { unsigned char timer_cnt, val; u64 ns; struct snd_pcm_substream *substream; struct snd_pcm_runtime *runtime; - struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer); unsigned long flags; if (chip->thalf) { outb(chip->val61, 0x61); chip->thalf = 0; - if (!atomic_read(&chip->timer_active)) - return 0; return chip->ns_rem; } - if (!atomic_read(&chip->timer_active)) - return 0; substream = chip->playback_substream; if (!substream) return 0; @@ -88,24 +83,17 @@ static unsigned long pcsp_timer_update(struct hrtimer *handle) return ns; } -enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle) +static void pcsp_pointer_update(struct snd_pcsp *chip) { - struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer); struct snd_pcm_substream *substream; - int periods_elapsed, pointer_update; size_t period_bytes, buffer_bytes; - unsigned long ns; + int periods_elapsed; unsigned long flags; - pointer_update = !chip->thalf; - ns = pcsp_timer_update(handle); - if (!ns) - return HRTIMER_NORESTART; - /* update the playback position */ substream = chip->playback_substream; if (!substream) - return HRTIMER_NORESTART; + return; period_bytes = snd_pcm_lib_period_bytes(substream); buffer_bytes = snd_pcm_lib_buffer_bytes(substream); @@ -134,6 +122,26 @@ enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle) if (periods_elapsed) tasklet_schedule(&pcsp_pcm_tasklet); +} + +enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle) +{ + struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer); + int pointer_update; + u64 ns; + + if (!atomic_read(&chip->timer_active) || !chip->playback_substream) + return HRTIMER_NORESTART; + + pointer_update = !chip->thalf; + ns = pcsp_timer_update(chip); + if (!ns) { + printk(KERN_WARNING "PCSP: unexpected stop\n"); + return HRTIMER_NORESTART; + } + + if (pointer_update) + pcsp_pointer_update(chip); hrtimer_forward(handle, hrtimer_get_expires(handle), ns_to_ktime(ns)); @@ -142,8 +150,6 @@ enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle) static int pcsp_start_playing(struct snd_pcsp *chip) { - unsigned long ns; - #if PCSP_DEBUG printk(KERN_INFO "PCSP: start_playing called\n"); #endif @@ -159,11 +165,7 @@ static int pcsp_start_playing(struct snd_pcsp *chip) atomic_set(&chip->timer_active, 1); chip->thalf = 0; - ns = pcsp_timer_update(&pcsp_chip.timer); - if (!ns) - return -EIO; - - hrtimer_start(&pcsp_chip.timer, ktime_set(0, ns), HRTIMER_MODE_REL); + hrtimer_start(&pcsp_chip.timer, ktime_set(0, 0), HRTIMER_MODE_REL); return 0; } @@ -232,21 +234,22 @@ static int snd_pcsp_playback_hw_free(struct snd_pcm_substream *substream) static int snd_pcsp_playback_prepare(struct snd_pcm_substream *substream) { struct snd_pcsp *chip = snd_pcm_substream_chip(substream); + pcsp_sync_stop(chip); + chip->playback_ptr = 0; + chip->period_ptr = 0; + chip->fmt_size = + snd_pcm_format_physical_width(substream->runtime->format) >> 3; + chip->is_signed = snd_pcm_format_signed(substream->runtime->format); #if PCSP_DEBUG printk(KERN_INFO "PCSP: prepare called, " - "size=%zi psize=%zi f=%zi f1=%i\n", + "size=%zi psize=%zi f=%zi f1=%i fsize=%i\n", snd_pcm_lib_buffer_bytes(substream), snd_pcm_lib_period_bytes(substream), snd_pcm_lib_buffer_bytes(substream) / snd_pcm_lib_period_bytes(substream), - substream->runtime->periods); + substream->runtime->periods, + chip->fmt_size); #endif - pcsp_sync_stop(chip); - chip->playback_ptr = 0; - chip->period_ptr = 0; - chip->fmt_size = - snd_pcm_format_physical_width(substream->runtime->format) >> 3; - chip->is_signed = snd_pcm_format_signed(substream->runtime->format); return 0; } diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c index 199b0337714..903bc846763 100644 --- a/sound/drivers/pcsp/pcsp_mixer.c +++ b/sound/drivers/pcsp/pcsp_mixer.c @@ -72,7 +72,7 @@ static int pcsp_treble_put(struct snd_kcontrol *kcontrol, if (treble != chip->treble) { chip->treble = treble; #if PCSP_DEBUG - printk(KERN_INFO "PCSP: rate set to %i\n", PCSP_RATE()); + printk(KERN_INFO "PCSP: rate set to %li\n", PCSP_RATE()); #endif changed = 1; } -- GitLab From db32f99816f7cbe61c1f75c1560655a3bf52488a Mon Sep 17 00:00:00 2001 From: peer chen Date: Thu, 15 Oct 2009 16:37:47 +0800 Subject: [PATCH 0372/1165] ALSA: hda_intel: Add the Linux device ID for NVIDIA HDA controller Add the generic device ID for NVIDIA HDA controller. Signed-off-by: Peer Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index c9ad182e1b4..e340792f6cb 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2674,6 +2674,7 @@ static struct pci_device_id azx_ids[] = { { PCI_DEVICE(0x10de, 0x044b), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x055c), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x055d), .driver_data = AZX_DRIVER_NVIDIA }, + { PCI_DEVICE(0x10de, 0x0590), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0774), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0775), .driver_data = AZX_DRIVER_NVIDIA }, { PCI_DEVICE(0x10de, 0x0776), .driver_data = AZX_DRIVER_NVIDIA }, -- GitLab From 4b3be6afa4ab8b3fdce39df68bad71f8b85164de Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:33:22 +0200 Subject: [PATCH 0373/1165] ALSA: sound: Move dereference after NULL test and drop unnecessary NULL tests In pcm.c, if the NULL test on pcm is needed, then the dereference should be after the NULL test. In dummy.c and ali5451.c, the context of the calls to snd_card_dummy_new_mixer and snd_ali_free_voice show that dummy and pvoice, respectively cannot be NULL. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/core/pcm.c | 5 +++-- sound/drivers/dummy.c | 2 -- sound/pci/ali5451/ali5451.c | 2 +- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/sound/core/pcm.c b/sound/core/pcm.c index 0c1440121c2..c69c60b2a48 100644 --- a/sound/core/pcm.c +++ b/sound/core/pcm.c @@ -953,11 +953,12 @@ static int snd_pcm_dev_register(struct snd_device *device) struct snd_pcm_substream *substream; struct snd_pcm_notify *notify; char str[16]; - struct snd_pcm *pcm = device->device_data; + struct snd_pcm *pcm; struct device *dev; - if (snd_BUG_ON(!pcm || !device)) + if (snd_BUG_ON(!device || !device->device_data)) return -ENXIO; + pcm = device->device_data; mutex_lock(®ister_mutex); err = snd_pcm_add(pcm); if (err) { diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c index 6ba066c41d2..146ef00f94a 100644 --- a/sound/drivers/dummy.c +++ b/sound/drivers/dummy.c @@ -808,8 +808,6 @@ static int __devinit snd_card_dummy_new_mixer(struct snd_dummy *dummy) unsigned int idx; int err; - if (snd_BUG_ON(!dummy)) - return -EINVAL; spin_lock_init(&dummy->mixer_lock); strcpy(card->mixername, "Dummy Mixer"); diff --git a/sound/pci/ali5451/ali5451.c b/sound/pci/ali5451/ali5451.c index b458d208720..aaf4da68969 100644 --- a/sound/pci/ali5451/ali5451.c +++ b/sound/pci/ali5451/ali5451.c @@ -973,7 +973,7 @@ static void snd_ali_free_voice(struct snd_ali * codec, void *private_data; snd_ali_printk("free_voice: channel=%d\n",pvoice->number); - if (pvoice == NULL || !pvoice->use) + if (!pvoice->use) return; snd_ali_clear_voices(codec, pvoice->number, pvoice->number); spin_lock_irq(&codec->voice_alloc); -- GitLab From e8e0929d7290cab7c5b1a3e5f5f54f73daf38038 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:33:47 +0200 Subject: [PATCH 0374/1165] ALSA: sound/parisc: Move dereference after NULL test If the NULL test on h is needed in snd_harmony_mixer_init, then the dereference should be after the NULL test. Actually, there is a sequence of calls: snd_harmony_create, then snd_harmony_pcm_init, and then snd_harmony_mixer_init. snd_harmony_create initializes h, but may indeed leave it as NULL. There was no NULL test at the beginning of snd_harmony_pcm_init, so I have added one. The NULL test in snd_harmony_mixer_init is then not necessary, but in case the ordering of the calls changes, I have left it, and moved the dereference after it. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Takashi Iwai --- sound/parisc/harmony.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/parisc/harmony.c b/sound/parisc/harmony.c index e924492df21..f47f9e226b0 100644 --- a/sound/parisc/harmony.c +++ b/sound/parisc/harmony.c @@ -624,6 +624,9 @@ snd_harmony_pcm_init(struct snd_harmony *h) struct snd_pcm *pcm; int err; + if (snd_BUG_ON(!h)) + return -EINVAL; + harmony_disable_interrupts(h); err = snd_pcm_new(h->card, "harmony", 0, 1, 1, &pcm); @@ -865,11 +868,12 @@ snd_harmony_mixer_reset(struct snd_harmony *h) static int __devinit snd_harmony_mixer_init(struct snd_harmony *h) { - struct snd_card *card = h->card; + struct snd_card *card; int idx, err; if (snd_BUG_ON(!h)) return -EINVAL; + card = h->card; strcpy(card->mixername, "Harmony Gain control interface"); for (idx = 0; idx < HARMONY_CONTROLS; idx++) { -- GitLab From 3702b082281929cf1bdf14f67eb0619aab58b496 Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Sat, 24 Oct 2009 12:59:35 +0100 Subject: [PATCH 0375/1165] ALSA: snd-usb-caiaq: Missing lock around use of buffer positions Fix a race which causes snd_pcm_update_hw_ptr_pos() to report a bug. Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/caiaq/audio.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index 121af0644fd..e76017cd5ac 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -269,16 +269,22 @@ snd_usb_caiaq_pcm_pointer(struct snd_pcm_substream *sub) { int index = sub->number; struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub); + snd_pcm_uframes_t ptr; + + spin_lock(&dev->spinlock); if (dev->input_panic || dev->output_panic) - return SNDRV_PCM_POS_XRUN; + ptr = SNDRV_PCM_POS_XRUN; if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) - return bytes_to_frames(sub->runtime, + ptr = bytes_to_frames(sub->runtime, dev->audio_out_buf_pos[index]); else - return bytes_to_frames(sub->runtime, + ptr = bytes_to_frames(sub->runtime, dev->audio_in_buf_pos[index]); + + spin_unlock(&dev->spinlock); + return ptr; } /* operators for both playback and capture */ -- GitLab From ac9dd9d384b018f1e1c5a9a2686ab5605ce55818 Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Sat, 24 Oct 2009 12:59:36 +0100 Subject: [PATCH 0376/1165] ALSA: snd-usb-caiaq: Lock on stream start/unpause Fix a bug which can result in white noise from the driver after stream start or unpause. Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/caiaq/audio.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c index e76017cd5ac..86b2c3b92df 100644 --- a/sound/usb/caiaq/audio.c +++ b/sound/usb/caiaq/audio.c @@ -62,10 +62,14 @@ static void activate_substream(struct snd_usb_caiaqdev *dev, struct snd_pcm_substream *sub) { + spin_lock(&dev->spinlock); + if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) dev->sub_playback[sub->number] = sub; else dev->sub_capture[sub->number] = sub; + + spin_unlock(&dev->spinlock); } static void -- GitLab From 467cc1692036909ee0a723ce633fc4a53d72fd9a Mon Sep 17 00:00:00 2001 From: Mark Hills Date: Sat, 24 Oct 2009 12:59:37 +0100 Subject: [PATCH 0377/1165] ALSA: snd-usb-caiaq: Bump version number to 1.3.20 Signed-off-by: Mark Hills Acked-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/caiaq/device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c index 83e6c1312d4..a3f02dd9744 100644 --- a/sound/usb/caiaq/device.c +++ b/sound/usb/caiaq/device.c @@ -35,7 +35,7 @@ #include "input.h" MODULE_AUTHOR("Daniel Mack "); -MODULE_DESCRIPTION("caiaq USB audio, version 1.3.19"); +MODULE_DESCRIPTION("caiaq USB audio, version 1.3.20"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2}," "{Native Instruments, RigKontrol3}," -- GitLab From 3d00941371a765779c4e3509214c7e5793cce1fe Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 22 Oct 2009 09:04:09 +0200 Subject: [PATCH 0378/1165] sound: via82xx: deactivate DXS controls of inactive streams Activate the DXS volume controls only when the corresponding stream is being used. This makes the behaviour consistent with the other drivers that have per-stream volume controls. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- sound/pci/via82xx.c | 59 +++++++++++++++++++++++++++++++++++++++------ 1 file changed, 52 insertions(+), 7 deletions(-) diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c index 91683a34903..8a332d2f615 100644 --- a/sound/pci/via82xx.c +++ b/sound/pci/via82xx.c @@ -386,6 +386,7 @@ struct via82xx { struct snd_pcm *pcms[2]; struct snd_rawmidi *rmidi; + struct snd_kcontrol *dxs_controls[4]; struct snd_ac97_bus *ac97_bus; struct snd_ac97 *ac97; @@ -1216,9 +1217,9 @@ static int snd_via82xx_pcm_open(struct via82xx *chip, struct viadev *viadev, /* - * open callback for playback on via686 and via823x DSX + * open callback for playback on via686 */ -static int snd_via82xx_playback_open(struct snd_pcm_substream *substream) +static int snd_via686_playback_open(struct snd_pcm_substream *substream) { struct via82xx *chip = snd_pcm_substream_chip(substream); struct viadev *viadev = &chip->devs[chip->playback_devno + substream->number]; @@ -1229,6 +1230,32 @@ static int snd_via82xx_playback_open(struct snd_pcm_substream *substream) return 0; } +/* + * open callback for playback on via823x DXS + */ +static int snd_via8233_playback_open(struct snd_pcm_substream *substream) +{ + struct via82xx *chip = snd_pcm_substream_chip(substream); + struct viadev *viadev; + unsigned int stream; + int err; + + viadev = &chip->devs[chip->playback_devno + substream->number]; + if ((err = snd_via82xx_pcm_open(chip, viadev, substream)) < 0) + return err; + stream = viadev->reg_offset / 0x10; + if (chip->dxs_controls[stream]) { + chip->playback_volume[stream][0] = 0; + chip->playback_volume[stream][1] = 0; + chip->dxs_controls[stream]->vd[0].access &= + ~SNDRV_CTL_ELEM_ACCESS_INACTIVE; + snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE | + SNDRV_CTL_EVENT_MASK_INFO, + &chip->dxs_controls[stream]->id); + } + return 0; +} + /* * open callback for playback on via823x multi-channel */ @@ -1302,10 +1329,26 @@ static int snd_via82xx_pcm_close(struct snd_pcm_substream *substream) return 0; } +static int snd_via8233_playback_close(struct snd_pcm_substream *substream) +{ + struct via82xx *chip = snd_pcm_substream_chip(substream); + struct viadev *viadev = substream->runtime->private_data; + unsigned int stream; + + stream = viadev->reg_offset / 0x10; + if (chip->dxs_controls[stream]) { + chip->dxs_controls[stream]->vd[0].access |= + SNDRV_CTL_ELEM_ACCESS_INACTIVE; + snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_INFO, + &chip->dxs_controls[stream]->id); + } + return snd_via82xx_pcm_close(substream); +} + /* via686 playback callbacks */ static struct snd_pcm_ops snd_via686_playback_ops = { - .open = snd_via82xx_playback_open, + .open = snd_via686_playback_open, .close = snd_via82xx_pcm_close, .ioctl = snd_pcm_lib_ioctl, .hw_params = snd_via82xx_hw_params, @@ -1331,8 +1374,8 @@ static struct snd_pcm_ops snd_via686_capture_ops = { /* via823x DSX playback callbacks */ static struct snd_pcm_ops snd_via8233_playback_ops = { - .open = snd_via82xx_playback_open, - .close = snd_via82xx_pcm_close, + .open = snd_via8233_playback_open, + .close = snd_via8233_playback_close, .ioctl = snd_pcm_lib_ioctl, .hw_params = snd_via82xx_hw_params, .hw_free = snd_via82xx_hw_free, @@ -1709,8 +1752,9 @@ static struct snd_kcontrol_new snd_via8233_dxs_volume_control __devinitdata = { .device = 0, /* .subdevice set later */ .name = "PCM Playback Volume", - .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE | - SNDRV_CTL_ELEM_ACCESS_TLV_READ), + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ | + SNDRV_CTL_ELEM_ACCESS_INACTIVE, .info = snd_via8233_dxs_volume_info, .get = snd_via8233_dxs_volume_get, .put = snd_via8233_dxs_volume_put, @@ -1948,6 +1992,7 @@ static int __devinit snd_via8233_init_misc(struct via82xx *chip) err = snd_ctl_add(chip->card, kctl); if (err < 0) return err; + chip->dxs_controls[i] = kctl; } } } -- GitLab From 9d410c796067686b1e032d54ce475b7055537138 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 30 Oct 2009 05:03:53 +0000 Subject: [PATCH 0379/1165] net: fix sk_forward_alloc corruption On UDP sockets, we must call skb_free_datagram() with socket locked, or risk sk_forward_alloc corruption. This requirement is not respected in SUNRPC. Add a convenient helper, skb_free_datagram_locked() and use it in SUNRPC Reported-by: Francis Moreau Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 2 ++ net/core/datagram.c | 10 +++++++++- net/ipv4/udp.c | 4 +--- net/ipv6/udp.c | 4 +--- net/sunrpc/svcsock.c | 10 +++++----- 5 files changed, 18 insertions(+), 12 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 6aebfceca3e..bcdd6606f46 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1757,6 +1757,8 @@ extern int skb_copy_datagram_const_iovec(const struct sk_buff *from, int to_offset, int size); extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb); +extern void skb_free_datagram_locked(struct sock *sk, + struct sk_buff *skb); extern int skb_kill_datagram(struct sock *sk, struct sk_buff *skb, unsigned int flags); extern __wsum skb_checksum(const struct sk_buff *skb, int offset, diff --git a/net/core/datagram.c b/net/core/datagram.c index 1c6cf3a1a4f..4ade3011bb3 100644 --- a/net/core/datagram.c +++ b/net/core/datagram.c @@ -224,6 +224,15 @@ void skb_free_datagram(struct sock *sk, struct sk_buff *skb) consume_skb(skb); sk_mem_reclaim_partial(sk); } +EXPORT_SYMBOL(skb_free_datagram); + +void skb_free_datagram_locked(struct sock *sk, struct sk_buff *skb) +{ + lock_sock(sk); + skb_free_datagram(sk, skb); + release_sock(sk); +} +EXPORT_SYMBOL(skb_free_datagram_locked); /** * skb_kill_datagram - Free a datagram skbuff forcibly @@ -752,5 +761,4 @@ unsigned int datagram_poll(struct file *file, struct socket *sock, EXPORT_SYMBOL(datagram_poll); EXPORT_SYMBOL(skb_copy_and_csum_datagram_iovec); EXPORT_SYMBOL(skb_copy_datagram_iovec); -EXPORT_SYMBOL(skb_free_datagram); EXPORT_SYMBOL(skb_recv_datagram); diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index d0d436d6216..0fa9f70e4b1 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -999,9 +999,7 @@ try_again: err = ulen; out_free: - lock_sock(sk); - skb_free_datagram(sk, skb); - release_sock(sk); + skb_free_datagram_locked(sk, skb); out: return err; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 3a60f12b34e..cf538ed5ef6 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -288,9 +288,7 @@ try_again: err = ulen; out_free: - lock_sock(sk); - skb_free_datagram(sk, skb); - release_sock(sk); + skb_free_datagram_locked(sk, skb); out: return err; diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index ccc5e83cae5..1c246a4f491 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -111,7 +111,7 @@ static void svc_release_skb(struct svc_rqst *rqstp) rqstp->rq_xprt_ctxt = NULL; dprintk("svc: service %p, releasing skb %p\n", rqstp, skb); - skb_free_datagram(svsk->sk_sk, skb); + skb_free_datagram_locked(svsk->sk_sk, skb); } } @@ -578,7 +578,7 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp) "svc: received unknown control message %d/%d; " "dropping RPC reply datagram\n", cmh->cmsg_level, cmh->cmsg_type); - skb_free_datagram(svsk->sk_sk, skb); + skb_free_datagram_locked(svsk->sk_sk, skb); return 0; } @@ -588,18 +588,18 @@ static int svc_udp_recvfrom(struct svc_rqst *rqstp) if (csum_partial_copy_to_xdr(&rqstp->rq_arg, skb)) { local_bh_enable(); /* checksum error */ - skb_free_datagram(svsk->sk_sk, skb); + skb_free_datagram_locked(svsk->sk_sk, skb); return 0; } local_bh_enable(); - skb_free_datagram(svsk->sk_sk, skb); + skb_free_datagram_locked(svsk->sk_sk, skb); } else { /* we can use it in-place */ rqstp->rq_arg.head[0].iov_base = skb->data + sizeof(struct udphdr); rqstp->rq_arg.head[0].iov_len = len; if (skb_checksum_complete(skb)) { - skb_free_datagram(svsk->sk_sk, skb); + skb_free_datagram_locked(svsk->sk_sk, skb); return 0; } rqstp->rq_xprt_ctxt = skb; -- GitLab From 33cb7d33a1c36e07839d08a4d1a33bf6a0f70bba Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Thu, 29 Oct 2009 13:58:07 +0000 Subject: [PATCH 0380/1165] sky2: set carrier off in probe Before bringing up a sky2 interface up ethtool reports "Link detected: yes". Do as ixgbe does and netif_carrier_off() on probe(). Signed-off-by: Brandon Philips Signed-off-by: David S. Miller --- drivers/net/sky2.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 2ab5c39f33c..6a10d7ba587 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4538,6 +4538,8 @@ static int __devinit sky2_probe(struct pci_dev *pdev, goto err_out_free_netdev; } + netif_carrier_off(dev); + netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT); err = request_irq(pdev->irq, sky2_intr, -- GitLab From 2e9526b352061ee0fd2a1580a2e3a5af960dabc4 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 30 Oct 2009 05:51:48 +0000 Subject: [PATCH 0381/1165] gre: Fix dev_addr clobbering for gretap Nathan Neulinger noticed that gretap devices get their MAC address from the local IP address, which results in invalid MAC addresses half of the time. This is because gretap is still using the tunnel netdev ops rather than the correct tap netdev ops struct. This patch also fixes changelink to not clobber the MAC address for the gretap case. Signed-off-by: Herbert Xu Acked-by: Stephen Hemminger Tested-by: Nathan Neulinger Signed-off-by: David S. Miller --- net/ipv4/ip_gre.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 41ada9904d3..14333385262 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -1464,7 +1464,7 @@ static void ipgre_tap_setup(struct net_device *dev) ether_setup(dev); - dev->netdev_ops = &ipgre_netdev_ops; + dev->netdev_ops = &ipgre_tap_netdev_ops; dev->destructor = free_netdev; dev->iflink = 0; @@ -1525,25 +1525,29 @@ static int ipgre_changelink(struct net_device *dev, struct nlattr *tb[], if (t->dev != dev) return -EEXIST; } else { - unsigned nflags = 0; - t = nt; - if (ipv4_is_multicast(p.iph.daddr)) - nflags = IFF_BROADCAST; - else if (p.iph.daddr) - nflags = IFF_POINTOPOINT; + if (dev->type != ARPHRD_ETHER) { + unsigned nflags = 0; - if ((dev->flags ^ nflags) & - (IFF_POINTOPOINT | IFF_BROADCAST)) - return -EINVAL; + if (ipv4_is_multicast(p.iph.daddr)) + nflags = IFF_BROADCAST; + else if (p.iph.daddr) + nflags = IFF_POINTOPOINT; + + if ((dev->flags ^ nflags) & + (IFF_POINTOPOINT | IFF_BROADCAST)) + return -EINVAL; + } ipgre_tunnel_unlink(ign, t); t->parms.iph.saddr = p.iph.saddr; t->parms.iph.daddr = p.iph.daddr; t->parms.i_key = p.i_key; - memcpy(dev->dev_addr, &p.iph.saddr, 4); - memcpy(dev->broadcast, &p.iph.daddr, 4); + if (dev->type != ARPHRD_ETHER) { + memcpy(dev->dev_addr, &p.iph.saddr, 4); + memcpy(dev->broadcast, &p.iph.daddr, 4); + } ipgre_tunnel_link(ign, t); netdev_state_change(dev); } -- GitLab From e6c5fc53d0f44a772398402ee8a1879818e42b4e Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Thu, 15 Oct 2009 14:50:28 +0800 Subject: [PATCH 0382/1165] ipw2200: fix oops on missing firmware For non-monitor interfaces, the syntax for alloc_ieee80211/free_80211 is wrong. Because alloc_ieee80211 only creates (wiphy_new) a wiphy, but free_80211() does wiphy_unregister() also. This is only correct when the later wiphy_register() is called successfully, which apparently is not the case for your fw doesn't exist one. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2100.c | 5 ++++- drivers/net/wireless/ipw2x00/ipw2200.c | 2 ++ drivers/net/wireless/ipw2x00/libipw.h | 1 + drivers/net/wireless/ipw2x00/libipw_module.c | 14 +++++++++----- 4 files changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 240cff1e697..a741d37fd96 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6325,8 +6325,10 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, fail: if (dev) { - if (registered) + if (registered) { + unregister_ieee80211(priv->ieee); unregister_netdev(dev); + } ipw2100_hw_stop_adapter(priv); @@ -6383,6 +6385,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) /* Unregister the device first - this results in close() * being called if the device is open. If we free storage * first, then close() will crash. */ + unregister_ieee80211(priv->ieee); unregister_netdev(dev); /* ipw2100_down will ensure that there is no more pending work diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 8d58e6ed4e7..04341a2a619 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11821,6 +11821,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, if (err) { IPW_ERROR("Failed to register promiscuous network " "device (error %d).\n", err); + unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); goto out_remove_sysfs; } @@ -11871,6 +11872,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) mutex_unlock(&priv->mutex); + unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); if (priv->rxq) { diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index bf45391172f..f42ade6c2d3 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -1020,6 +1020,7 @@ static inline int libipw_is_cck_rate(u8 rate) /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev, int monitor); extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); +extern void unregister_ieee80211(struct libipw_device *ieee); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index a0e9f6aed7d..be5b809ec97 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -235,16 +235,19 @@ void free_ieee80211(struct net_device *dev, int monitor) libipw_networks_free(ieee); /* free cfg80211 resources */ - if (!monitor) { - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); + if (!monitor) wiphy_free(ieee->wdev.wiphy); - } free_netdev(dev); } +void unregister_ieee80211(struct libipw_device *ieee) +{ + wiphy_unregister(ieee->wdev.wiphy); + kfree(ieee->a_band.channels); + kfree(ieee->bg_band.channels); +} + #ifdef CONFIG_LIBIPW_DEBUG static int debug = 0; @@ -330,3 +333,4 @@ module_init(libipw_init); EXPORT_SYMBOL(alloc_ieee80211); EXPORT_SYMBOL(free_ieee80211); +EXPORT_SYMBOL(unregister_ieee80211); -- GitLab From 227206455fde433f86305f9a5b8bdd1eca759929 Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Mon, 19 Oct 2009 11:51:11 +0200 Subject: [PATCH 0383/1165] rt73usb.c : more ids stolen from windows inf file(07/17/2009, 1.03.05.0000) Ovislink 0x1b75, 0x7318 MSI 0x0db0, 0x4600 WideTell 0x7167, 0x3840 Signed-off-by: Xose Vazquez Perez Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt73usb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index b8f5ee33445..14e7bb21007 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2389,10 +2389,13 @@ static struct usb_device_id rt73usb_device_table[] = { { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) }, /* MSI */ + { USB_DEVICE(0x0db0, 0x4600), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) }, + /* Ovislink */ + { USB_DEVICE(0x1b75, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) }, /* Ralink */ { USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) }, @@ -2420,6 +2423,8 @@ static struct usb_device_id rt73usb_device_table[] = { /* Planex */ { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) }, + /* WideTell */ + { USB_DEVICE(0x7167, 0x3840), USB_DEVICE_DATA(&rt73usb_ops) }, /* Zcom */ { USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) }, /* ZyXEL */ -- GitLab From f446d10f214091408b7300f15c9adf60569edf28 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 28 Oct 2009 15:12:32 +0100 Subject: [PATCH 0384/1165] mac80211: fix BSS leak The IBSS code leaks a BSS struct after telling cfg80211 about a given BSS by passing a frame. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index ca8ecce31d3..f1362f32c17 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -73,6 +73,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt; u8 *pos; struct ieee80211_supported_band *sband; + struct cfg80211_bss *bss; u32 bss_change; u8 supp_rates[IEEE80211_MAX_SUPP_RATES]; @@ -177,8 +178,9 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, mod_timer(&ifibss->timer, round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL)); - cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel, - mgmt, skb->len, 0, GFP_KERNEL); + bss = cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel, + mgmt, skb->len, 0, GFP_KERNEL); + cfg80211_put_bss(bss); cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL); } -- GitLab From 9a3f45116f5e08819136cd512fd7f6450ac22aa8 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Wed, 28 Oct 2009 22:08:13 +0100 Subject: [PATCH 0385/1165] b43: Fix DMA TX bounce buffer copying b43 allocates a bouncebuffer, if the supplied TX skb is in an invalid memory range for DMA. However, this is broken in that it fails to copy over some metadata to the new skb. This patch fixes three problems: * Failure to adjust the ieee80211_tx_info pointer to the new buffer. This results in a kmemcheck warning. * Failure to copy the skb cb, which contains ieee80211_tx_info, to the new skb. This results in breakage of various TX-status postprocessing (Rate control). * Failure to transfer the queue mapping. This results in the wrong queue being stopped on saturation and can result in queue overflow. Signed-off-by: Michael Buesch Tested-by: Christian Casteyde Signed-off-by: John W. Linville --- drivers/net/wireless/b43/dma.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 8701034569f..de4e804bedf 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -1157,8 +1157,9 @@ struct b43_dmaring *parse_cookie(struct b43_wldev *dev, u16 cookie, int *slot) } static int dma_tx_fragment(struct b43_dmaring *ring, - struct sk_buff *skb) + struct sk_buff **in_skb) { + struct sk_buff *skb = *in_skb; const struct b43_dma_ops *ops = ring->ops; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); u8 *header; @@ -1224,8 +1225,14 @@ static int dma_tx_fragment(struct b43_dmaring *ring, } memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len); + memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb)); + bounce_skb->dev = skb->dev; + skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb)); + info = IEEE80211_SKB_CB(bounce_skb); + dev_kfree_skb_any(skb); skb = bounce_skb; + *in_skb = bounce_skb; meta->skb = skb; meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1); if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) { @@ -1355,7 +1362,11 @@ int b43_dma_tx(struct b43_wldev *dev, struct sk_buff *skb) * static, so we don't need to store it per frame. */ ring->queue_prio = skb_get_queue_mapping(skb); - err = dma_tx_fragment(ring, skb); + /* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing + * into the skb data or cb now. */ + hdr = NULL; + info = NULL; + err = dma_tx_fragment(ring, &skb); if (unlikely(err == -ENOKEY)) { /* Drop this packet, as we don't have the encryption key * anymore and must not transmit it unencrypted. */ -- GitLab From e55ea2b152569f09ef6bb28d5a341a4e5a21f5ce Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 28 Oct 2009 20:19:06 -0400 Subject: [PATCH 0386/1165] ath9k: fix misplaced semicolon on rate control The patch e43419f9: ath9k: downgrade assert in rc.c for invalid rate downgraded an ASSERT to a WARN_ON() but also misplaced a semicolon at the end of the second check. What this did was force the rate control code to always return the rate even if we should have warned about it. Since this should not have happened anymore anyway this fix isn't critical as the proper rate would have been returned anyway. Cc: stable@kernel.org Reported-by: Jiri Slaby Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/rc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 16a271787b8..1895d63aad0 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -679,7 +679,7 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc, return rate; if (rate_table->info[rate].valid_single_stream && - !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)); + !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG)) return rate; /* This should not happen */ -- GitLab From 2171abc58644e09dbba546d91366b12743115396 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Oct 2009 08:34:00 +0100 Subject: [PATCH 0387/1165] mac80211: fix addba timer The addba timer function acquires the sta spinlock, but at the same time we try to del_timer_sync() it under the spinlock which can produce deadlocks. To fix this, always del_timer_sync() the timer in ieee80211_process_addba_resp() and add it again after checking the conditions, if necessary. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/agg-tx.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index bd765f30dba..b09948ceec4 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -666,26 +666,25 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, state = &sta->ampdu_mlme.tid_state_tx[tid]; + del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + spin_lock_bh(&sta->lock); - if (!(*state & HT_ADDBA_REQUESTED_MSK)) { - spin_unlock_bh(&sta->lock); - return; - } + if (!(*state & HT_ADDBA_REQUESTED_MSK)) + goto timer_still_needed; if (mgmt->u.action.u.addba_resp.dialog_token != sta->ampdu_mlme.tid_tx[tid]->dialog_token) { - spin_unlock_bh(&sta->lock); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ - return; + goto timer_still_needed; } - del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "switched off addBA timer for tid %d \n", tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ + if (le16_to_cpu(mgmt->u.action.u.addba_resp.status) == WLAN_STATUS_SUCCESS) { u8 curstate = *state; @@ -699,5 +698,11 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, } else { ___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR); } + + goto out; + + timer_still_needed: + add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + out: spin_unlock_bh(&sta->lock); } -- GitLab From 372362ade2fe5c33d749e017f1c5bc8140769a3e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Oct 2009 10:09:28 +0100 Subject: [PATCH 0388/1165] mac80211: fix reason code output endianness When HT debugging is enabled and we receive a DelBA frame we print out the reason code in the wrong byte order. Fix that so we don't get weird values printed. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ht.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 0891bfb0699..48ef1a282b9 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -153,7 +153,7 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, if (net_ratelimit()) printk(KERN_DEBUG "delba from %pM (%s) tid %d reason code %d\n", mgmt->sa, initiator ? "initiator" : "recipient", tid, - mgmt->u.action.u.delba.reason_code); + le16_to_cpu(mgmt->u.action.u.delba.reason_code)); #endif /* CONFIG_MAC80211_HT_DEBUG */ if (initiator == WLAN_BACK_INITIATOR) -- GitLab From e9024a059f2c17fb2bfab212ee9d31511d7b8e57 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 30 Oct 2009 17:45:14 +0000 Subject: [PATCH 0389/1165] libertas if_usb: Fix crash on 64-bit machines On a 64-bit kernel, skb->tail is an offset, not a pointer. The libertas usb driver passes it to usb_fill_bulk_urb() anyway, causing interesting crashes. Fix that by using skb->data instead. This highlights a problem with usb_fill_bulk_urb(). It doesn't notice when dma_map_single() fails and return the error to its caller as it should. In fact it _can't_ currently return the error, since it returns void. So this problem was showing up only at unmap time, after we'd already suffered memory corruption by doing DMA to a bogus address. Signed-off-by: David Woodhouse Cc: stable@kernel.org Acked-by: David S. Miller Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 92bc8c5f1ca..3fac4efa5ac 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -508,7 +508,7 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, /* Fill the receive configuration URB and initialise the Rx call back */ usb_fill_bulk_urb(cardp->rx_urb, cardp->udev, usb_rcvbulkpipe(cardp->udev, cardp->ep_in), - (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET), + skb->data + IPFIELD_ALIGN_OFFSET, MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn, cardp); -- GitLab From 412145947adfca60a4b5b4893fbae82dffa25edd Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 29 Oct 2009 12:16:22 +0000 Subject: [PATCH 0390/1165] tty: Mark generic_serial users as BROKEN There isn't much else I can do with these. I can find no hardware for any of them and no users. The code is broken. Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- arch/m68k/Kconfig | 6 +++--- drivers/char/Kconfig | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 29dd8489ffe..ecdc19a299b 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -561,7 +561,7 @@ config HPAPCI config MVME147_SCC bool "SCC support for MVME147 serial ports" - depends on MVME147 + depends on MVME147 && BROKEN help This is the driver for the serial ports on the Motorola MVME147 boards. Everyone using one of these boards should say Y here. @@ -576,14 +576,14 @@ config SERIAL167 config MVME162_SCC bool "SCC support for MVME162 serial ports" - depends on MVME16x + depends on MVME16x && BROKEN help This is the driver for the serial ports on the Motorola MVME162 and 172 boards. Everyone using one of these boards should say Y here. config BVME6000_SCC bool "SCC support for BVME6000 serial ports" - depends on BVME6000 + depends on BVME6000 && BROKEN help This is the driver for the serial ports on the BVME4000 and BVME6000 boards from BVM Ltd. Everyone using one of these boards should say diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 08a6f50ae79..6aad99ec4e0 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -323,7 +323,7 @@ config SPECIALIX config SX tristate "Specialix SX (and SI) card support" - depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) + depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN help This is a driver for the SX and SI multiport serial cards. Please read the file for details. @@ -334,7 +334,7 @@ config SX config RIO tristate "Specialix RIO system support" - depends on SERIAL_NONSTANDARD + depends on SERIAL_NONSTANDARD && BROKEN help This is a driver for the Specialix RIO, a smart serial card which drives an outboard box that can support up to 128 ports. Product @@ -395,7 +395,7 @@ config NOZOMI config A2232 tristate "Commodore A2232 serial support (EXPERIMENTAL)" - depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP + depends on EXPERIMENTAL && ZORRO && BROKEN ---help--- This option supports the 2232 7-port serial card shipped with the Amiga 2000 and other Zorro-bus machines, dating from 1989. At -- GitLab From 9bd0591be06a6a8e2f63c1dba4a64704c9d2002f Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 9 Oct 2009 15:47:50 -0700 Subject: [PATCH 0391/1165] Staging: hv TODO patches Update for more items Signed-off-by: Stephen Hemminger Cc: Hank Janssen Cc: Haiyang Zhang . Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/TODO | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/staging/hv/TODO b/drivers/staging/hv/TODO index 4d390b23774..dbfbde937a6 100644 --- a/drivers/staging/hv/TODO +++ b/drivers/staging/hv/TODO @@ -1,11 +1,17 @@ TODO: - fix remaining checkpatch warnings and errors + - use of /** when it is not a kerneldoc header - remove RingBuffer.c to us in-kernel ringbuffer functions instead. - audit the vmbus to verify it is working properly with the driver model + - convert vmbus driver interface function pointer tables + to constant, a.k.a vmbus_ops - see if the vmbus can be merged with the other virtual busses in the kernel - audit the network driver + - use existing net_device_stats struct in network device + - checking for carrier inside open is wrong, network device API + confusion?? - audit the block driver - audit the scsi driver -- GitLab From 1bb40a25b26ef7e2c4fb79ce430de2b9f836527f Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 23 Oct 2009 18:14:24 +0000 Subject: [PATCH 0392/1165] Staging: hv: Fix null pointer error after vmbus loading Fix null pointer error after vmbus loading. Remove code that checks for dev_name, the affected structure is kzalloc-ed prior to this routine, so it is always null at this stage. Signed-off-by: Hank Janssen Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/vmbus_drv.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/staging/hv/vmbus_drv.c b/drivers/staging/hv/vmbus_drv.c index 582318f1022..270fb7f64d7 100644 --- a/drivers/staging/hv/vmbus_drv.c +++ b/drivers/staging/hv/vmbus_drv.c @@ -537,18 +537,7 @@ static int vmbus_child_device_register(struct hv_device *root_device_obj, DPRINT_DBG(VMBUS_DRV, "child device (%p) registering", child_device_ctx); - /* Make sure we are not registered already */ - if (strlen(dev_name(&child_device_ctx->device)) != 0) { - DPRINT_ERR(VMBUS_DRV, - "child device (%p) already registered - busid %s", - child_device_ctx, - dev_name(&child_device_ctx->device)); - - ret = -1; - goto Cleanup; - } - - /* Set the device bus id. Otherwise, device_register()will fail. */ + /* Set the device name. Otherwise, device_register() will fail. */ dev_set_name(&child_device_ctx->device, "vmbus_0_%d", atomic_inc_return(&device_num)); @@ -573,7 +562,6 @@ static int vmbus_child_device_register(struct hv_device *root_device_obj, DPRINT_INFO(VMBUS_DRV, "child device (%p) registered", &child_device_ctx->device); -Cleanup: DPRINT_EXIT(VMBUS_DRV); return ret; -- GitLab From 78f98ba9cef4cad6122fc88efd18c2771844df98 Mon Sep 17 00:00:00 2001 From: Hank Janssen Date: Fri, 16 Oct 2009 20:11:36 +0000 Subject: [PATCH 0393/1165] Staging: hv: Fix vmbus load hang caused by faulty data packing Fix vmbus load hang caused by wrong data packing. Signed-off-by: Hank Janssen Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/ChannelMgmt.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/hv/ChannelMgmt.h b/drivers/staging/hv/ChannelMgmt.h index a839d8fe6ce..2782328c5f8 100644 --- a/drivers/staging/hv/ChannelMgmt.h +++ b/drivers/staging/hv/ChannelMgmt.h @@ -54,7 +54,7 @@ enum vmbus_channel_message_type { ChannelMessageViewRangeRemove = 18, #endif ChannelMessageCount -} __attribute__((packed)); +}; struct vmbus_channel_message_header { enum vmbus_channel_message_type MessageType; -- GitLab From 9fb5cce4d6a24a3c1b3d567f77ba991efdf72796 Mon Sep 17 00:00:00 2001 From: Milan Dadok Date: Wed, 28 Oct 2009 23:23:27 +0100 Subject: [PATCH 0394/1165] Staging: hv: fix oops in vmbus - udev events Fix typos in udev event send and guid variables copy Signed-off-by: Milan Dadok Cc: Hank Janssen Cc: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/vmbus_drv.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/staging/hv/vmbus_drv.c b/drivers/staging/hv/vmbus_drv.c index 270fb7f64d7..894eecfc63c 100644 --- a/drivers/staging/hv/vmbus_drv.c +++ b/drivers/staging/hv/vmbus_drv.c @@ -507,12 +507,12 @@ static struct hv_device *vmbus_child_device_create(struct hv_guid *type, child_device_obj = &child_device_ctx->device_obj; child_device_obj->context = context; - memcpy(&child_device_obj->deviceType, &type, sizeof(struct hv_guid)); - memcpy(&child_device_obj->deviceInstance, &instance, + memcpy(&child_device_obj->deviceType, type, sizeof(struct hv_guid)); + memcpy(&child_device_obj->deviceInstance, instance, sizeof(struct hv_guid)); - memcpy(&child_device_ctx->class_id, &type, sizeof(struct hv_guid)); - memcpy(&child_device_ctx->device_id, &instance, sizeof(struct hv_guid)); + memcpy(&child_device_ctx->class_id, type, sizeof(struct hv_guid)); + memcpy(&child_device_ctx->device_id, instance, sizeof(struct hv_guid)); DPRINT_EXIT(VMBUS_DRV); @@ -611,8 +611,6 @@ static void vmbus_child_device_destroy(struct hv_device *device_obj) static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env) { struct device_context *device_ctx = device_to_device_context(device); - int i = 0; - int len = 0; int ret; DPRINT_ENTER(VMBUS_DRV); @@ -632,8 +630,6 @@ static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env) device_ctx->class_id.data[14], device_ctx->class_id.data[15]); - env->envp_idx = i; - env->buflen = len; ret = add_uevent_var(env, "VMBUS_DEVICE_CLASS_GUID={" "%02x%02x%02x%02x-%02x%02x-%02x%02x-" "%02x%02x%02x%02x%02x%02x%02x%02x}", @@ -679,8 +675,6 @@ static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env) if (ret) return ret; - env->envp[env->envp_idx] = NULL; - DPRINT_EXIT(VMBUS_DRV); return 0; -- GitLab From 92ec0893ad0996a534a5b605659d3ca31cf5dfd9 Mon Sep 17 00:00:00 2001 From: Milan Dadok Date: Wed, 28 Oct 2009 23:23:37 +0100 Subject: [PATCH 0395/1165] Staging: hv: fix oops in vmbus - netvsc list_head Remove incorrect list_head usage. Variable of type list_head was used in some function's arguments as list item. Signed-off-by: Milan Dadok Cc: Hank Janssen Cc: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/NetVsc.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/staging/hv/NetVsc.c b/drivers/staging/hv/NetVsc.c index 1610b845198..d384c0ddf06 100644 --- a/drivers/staging/hv/NetVsc.c +++ b/drivers/staging/hv/NetVsc.c @@ -1052,7 +1052,7 @@ static void NetVscOnReceive(struct hv_device *Device, */ spin_lock_irqsave(&netDevice->receive_packet_list_lock, flags); while (!list_empty(&netDevice->ReceivePacketList)) { - list_move_tail(&netDevice->ReceivePacketList, &listHead); + list_move_tail(netDevice->ReceivePacketList.next, &listHead); if (++count == vmxferpagePacket->RangeCount + 1) break; } @@ -1071,7 +1071,7 @@ static void NetVscOnReceive(struct hv_device *Device, /* Return it to the freelist */ spin_lock_irqsave(&netDevice->receive_packet_list_lock, flags); for (i = count; i != 0; i--) { - list_move_tail(&listHead, + list_move_tail(listHead.next, &netDevice->ReceivePacketList); } spin_unlock_irqrestore(&netDevice->receive_packet_list_lock, @@ -1085,8 +1085,7 @@ static void NetVscOnReceive(struct hv_device *Device, } /* Remove the 1st packet to represent the xfer page packet itself */ - xferpagePacket = list_entry(&listHead, struct xferpage_packet, - ListEntry); + xferpagePacket = (struct xferpage_packet*)listHead.next; list_del(&xferpagePacket->ListEntry); /* This is how much we can satisfy */ @@ -1102,8 +1101,7 @@ static void NetVscOnReceive(struct hv_device *Device, /* Each range represents 1 RNDIS pkt that contains 1 ethernet frame */ for (i = 0; i < (count - 1); i++) { - netvscPacket = list_entry(&listHead, struct hv_netvsc_packet, - ListEntry); + netvscPacket = (struct hv_netvsc_packet*)listHead.next; list_del(&netvscPacket->ListEntry); /* Initialize the netvsc packet */ -- GitLab From 9fcfeab4e99c0e26df7426dbc6530d741934ed83 Mon Sep 17 00:00:00 2001 From: Milan Dadok Date: Wed, 28 Oct 2009 23:23:50 +0100 Subject: [PATCH 0396/1165] Staging: hv: fix oops in vmbus - missing #include Add missing #includes to make hv module compile successfull. Signed-off-by: Milan Dadok Cc: Hank Janssen Cc: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/ChannelMgmt.h | 1 + drivers/staging/hv/osd.h | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/staging/hv/ChannelMgmt.h b/drivers/staging/hv/ChannelMgmt.h index 2782328c5f8..fa973d86b62 100644 --- a/drivers/staging/hv/ChannelMgmt.h +++ b/drivers/staging/hv/ChannelMgmt.h @@ -26,6 +26,7 @@ #define _CHANNEL_MGMT_H_ #include +#include #include "RingBuffer.h" #include "VmbusChannelInterface.h" #include "VmbusPacketFormat.h" diff --git a/drivers/staging/hv/osd.h b/drivers/staging/hv/osd.h index 9504604c72b..ce064e8ea64 100644 --- a/drivers/staging/hv/osd.h +++ b/drivers/staging/hv/osd.h @@ -25,6 +25,7 @@ #ifndef _OSD_H_ #define _OSD_H_ +#include /* Defines */ #define ALIGN_UP(value, align) (((value) & (align-1)) ? \ -- GitLab From 0b0595bfdaae1f19a052ceee2a63c307793b9c22 Mon Sep 17 00:00:00 2001 From: Peter Huewe Date: Tue, 29 Sep 2009 01:22:40 +0200 Subject: [PATCH 0397/1165] Staging: Panel: prevent driver from calling misc_deregister twice on same ressource This patch prevents the driver from calling misc_deregister twice on the same ressouce when unloading the driver. Unloading the driver without this patch results in a Kernel BUG like this: Panel driver version 0.9.5 registered on parport0 (io=0x378). BUG: unable to handle kernel paging request at 0000000000100108 IP: [] misc_deregister+0x2d/0x90 PGD 6caff067 PUD 762b7067 PMD 0 Oops: 0002 [#1] PREEMPT SMP last sysfs file: /sys/devices/platform/w83627hf.656/in8_input ... This patch fixes this issue, although maybe not in the best way possible :) linux version v2.6.32-rc1 - linus git tree, Di 29. Sep 01:10:18 CEST 2009 Signed-off-by: Peter Huewe Signed-off-by: Greg Kroah-Hartman --- drivers/staging/panel/panel.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/staging/panel/panel.c b/drivers/staging/panel/panel.c index dd7d3fde969..4ce399b6d23 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/staging/panel/panel.c @@ -2071,11 +2071,15 @@ static void panel_detach(struct parport *port) return; } - if (keypad_enabled && keypad_initialized) + if (keypad_enabled && keypad_initialized) { misc_deregister(&keypad_dev); + keypad_initialized = 0; + } - if (lcd_enabled && lcd_initialized) + if (lcd_enabled && lcd_initialized) { misc_deregister(&lcd_dev); + lcd_initialized = 0; + } parport_release(pprt); parport_unregister_device(pprt); @@ -2211,13 +2215,16 @@ static void __exit panel_cleanup_module(void) del_timer(&scan_timer); if (pprt != NULL) { - if (keypad_enabled) + if (keypad_enabled) { misc_deregister(&keypad_dev); + keypad_initialized = 0; + } if (lcd_enabled) { panel_lcd_print("\x0cLCD driver " PANEL_VERSION "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-"); misc_deregister(&lcd_dev); + lcd_initialized = 0; } /* TODO: free all input signals */ -- GitLab From 557c0288b59a7b81513de4242b893654c70d636c Mon Sep 17 00:00:00 2001 From: miaofng Date: Tue, 29 Sep 2009 15:02:53 +0800 Subject: [PATCH 0398/1165] Staging: vt6656: fix the memory free bug in vntwusb_disconnect() This patch is used to solve the memory bug when people plug out the wusb card then plug in. Error logs are following: root@smdk2440:~# ifdown eth1 AP deauthed me, reason=2. Config_FileOperation file Not exist Zone=[1][J][P]!! WPA: Terminating root@smdk2440:~# ----> !!!!!!!!!!!!!!here plug out the wusbcard usb 1-1: USB disconnect, address 4 ----> !!!!!!!!!!!!!!!!!!!here plug in the wusb card usb 1-1: new full speed USB device using s3c2410-ohci and address 5 usb 1-1: New USB device found, idVendor=160a, idProduct=3184 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: VNT USB-802.11 Wireless LAN Adapter usb 1-1: Manufacturer: VIA Networking Technologies, Inc. usb 1-1: configuration #1 chosen from 1 choice VIA Networking Wireless LAN USB Driver Ver. 1.19_12 Copyright (c) 2004 VIA Networking Technologies, Inc. kernel BUG at mm/slab.c:2974! Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT Modules linked in: vt6656_stage CPU: 0 Not tainted (2.6.32-rc2 #14) PC is at __bug+0x1c/0x28 LR is at __bug+0x18/0x28 pc : [] lr : [] psr: 40000093 sp : c3867c68 ip : c3867bd0 fp : c3866000 r10: c3800600 r9 : c3802430 r8 : 00000004 r7 : c3802428 r6 : c3802660 r5 : c3802420 r4 : a0000013 r3 : 00000000 r2 : c3866000 r1 : 00000003 r0 : 00000024 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 0000717f Table: 330a8000 DAC: 00000017 Process khubd (pid: 152, stack limit = 0xc3866270) Stack: (0xc3867c68 to 0xc3868000) 7c60: c0093fdc c0094088 000000d0 000000d0 00000000 000080d0 7c80: 00000000 a0000013 c39ebec0 c3800600 000080d0 00000001 c03f13cc 00000006 7ca0: c02b36f0 c0094574 c0043428 0001c9de c39ebec0 c39ebea0 c3000c00 c02a6a84 7cc0: 89705f41 c3000c00 c39ebec0 c39ebea0 c3000c00 bf036f24 c39ebec8 00000006 7ce0: 00000000 c3000c00 c39ebec0 c39ebea0 c3000c00 bf036f24 c39ebec8 00000006 7d00: 00000000 bf003398 c00aa514 c3867d20 0000a1ff c00e1448 c39d9f84 c39aabe8 7d20: c3867d50 c00e1888 c39aabe8 c39ebea0 c39ebec0 bf036ebc c3000c00 bf036f24 7d40: 0000bec8 01000000 00000000 c39ebea0 c39ebec0 bf036ebc c3000c00 bf036f24 7d60: c39ebec8 00000000 00000000 c0223798 c39ebec0 c01daa14 bf036eec c3867da0 7d80: c045a4f8 c01da6e4 c39ebec0 00000000 c01daa14 c39ebec0 c3867da0 c01d9870 7da0: c38331a8 c39fcb94 c005b3b4 c39ebec0 c39ebec0 c39ebef4 00000000 c01da890 7dc0: c39ebec0 c39ebec0 c3000c00 c01d97f4 00000000 c01d8470 c39ebea0 c3000c68 7de0: 00000000 c3000c68 c3218a00 c3abcd20 00000001 c39ebec0 c39ebea0 c3000c00 7e00: 00000000 c3000c68 c3218a00 c3abcd20 00000001 c0221ee8 00000001 00000000 7e20: 00000000 00000000 00001388 00000000 c3000c04 c3000c68 c3bc29c0 00000001 7e40: c3bc29c4 00000001 c03f4af8 00000000 c39fe780 c3000c00 00000001 c045ab04 7e60: c3867eb8 c045a3bc c3000c70 00000000 00000000 c0229238 c3000c68 c0223210 7e80: c3000c00 c045aaf0 c045ab04 c0223230 c3000c68 c01daa14 c045ab04 c01da6e4 7ea0: c3000c68 00000000 c01daa14 c3000c68 c3867eb8 c01d9870 c38331a8 c3862f54 7ec0: c005b3b4 c3000c68 c3000c68 c3000c9c 00000002 c01da890 c3867ef9 c3000c68 7ee0: c3829f60 c01d97f4 00000000 c01d8470 c38918e0 c3aaf468 39383102 c300343a 7f00: 00000001 c0219660 c03f1768 c3000c00 00000000 c3000c68 00000002 c3aaf814 7f20: 00000001 00000101 c38918e0 c021b6e0 00000002 00000000 00000000 c3000c00 7f40: c38917c0 c021c418 00000064 00000064 00000101 c3867f60 c005b920 c3867f94 7f60: c3891830 c3aaf400 c3866000 c3aaf400 c3aaf800 00000000 c38918e0 c3aaf400 7f80: 00000012 00000000 00000000 c3837920 c00574a0 c3867f94 c3867f94 00000101 7fa0: 01010001 c3867fd4 c381bf48 c3867fd4 c381bf48 00000000 c021ba3c 00000000 7fc0: 00000000 00000000 00000000 c00573dc 00000000 00000000 c3867fd8 c3867fd8 7fe0: 00000000 00000000 00000000 00000000 00000000 c002ce88 00000000 ffff0000 [] (__bug+0x1c/0x28) from [] (cache_alloc_refill+0x13c/0x594) [] (cache_alloc_refill+0x13c/0x594) from [] (__kmalloc+0x94/0xd0) [] (__kmalloc+0x94/0xd0) from [] (alloc_netdev_mq+0x48/0x1b0) [] (alloc_netdev_mq+0x48/0x1b0) from [] (vntwusb_found1+0x58/0x53c [vt6656_stage]) [] (vntwusb_found1+0x58/0x53c [vt6656_stage]) from [] (usb_probe_interface+0x130/0x180) [] (usb_probe_interface+0x130/0x180) from [] (driver_probe_device+0xac/0x164) [] (driver_probe_device+0xac/0x164) from [] (bus_for_each_drv+0x50/0x90) [] (bus_for_each_drv+0x50/0x90) from [] (device_attach+0x50/0x68) [] (device_attach+0x50/0x68) from [] (bus_probe_device+0x28/0x54) [] (bus_probe_device+0x28/0x54) from [] (device_add+0x3b4/0x4f0) [] (device_add+0x3b4/0x4f0) from [] (usb_set_configuration+0x524/0x5b8) [] (usb_set_configuration+0x524/0x5b8) from [] (generic_probe+0x5c/0xa0) [] (generic_probe+0x5c/0xa0) from [] (usb_probe_device+0x48/0x54) [] (usb_probe_device+0x48/0x54) from [] (driver_probe_device+0xac/0x164) [] (driver_probe_device+0xac/0x164) from [] (bus_for_each_drv+0x50/0x90) [] (bus_for_each_drv+0x50/0x90) from [] (device_attach+0x50/0x68) [] (device_attach+0x50/0x68) from [] (bus_probe_device+0x28/0x54) [] (bus_probe_device+0x28/0x54) from [] (device_add+0x3b4/0x4f0) [] (device_add+0x3b4/0x4f0) from [] (usb_new_device+0x100/0x174) [] (usb_new_device+0x100/0x174) from [] (hub_thread+0x9dc/0xeec) [] (hub_thread+0x9dc/0xeec) from [] (kthread+0x78/0x80) [] (kthread+0x78/0x80) from [] (kernel_thread_exit+0x0/0x8) Code: e1a01000 e59f000c eb005014 e3a03000 (e5833000) ---[ end trace 2a51e0dbab9e4fbe ]--- note: khubd[152] exited with preempt_count 1 Signed-off-by: miaofng Signed-off-by: Greg Kroah-Hartman --- drivers/staging/vt6656/main_usb.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c index 7f96bcaf1c6..05186110c02 100644 --- a/drivers/staging/vt6656/main_usb.c +++ b/drivers/staging/vt6656/main_usb.c @@ -1332,7 +1332,6 @@ device_release_WPADEV(pDevice); free_netdev(pDevice->dev); } - kfree(pDevice); DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_disconnect3.. \n"); } -- GitLab From a010a3375227efbd6b8ac11b99c34c807a77c45a Mon Sep 17 00:00:00 2001 From: Herton Ronaldo Krzesinski Date: Fri, 2 Oct 2009 11:03:38 -0300 Subject: [PATCH 0399/1165] Staging: rtl8187se/rtl8192e/rtl8192su: allow module unload On rtl81* additions, they had its wireless stack made builtin instead of separated modules. But try_module_get/module_put in stack were kept, they are uneeded with the stack builtin and makes rtl81* modules impossible to remove on a system with an rtl81* card. request_module calls are also uneeded with stack builtin, so remove them too. Signed-off-by: Herton Ronaldo Krzesinski Cc: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- .../rtl8187se/ieee80211/ieee80211_crypt.c | 4 +--- .../rtl8187se/ieee80211/ieee80211_module.c | 4 +--- .../rtl8187se/ieee80211/ieee80211_softmac.c | 12 ++++------- .../rtl8187se/ieee80211/ieee80211_wx.c | 17 +++++---------- .../rtl8192e/ieee80211/ieee80211_crypt.c | 8 +------ .../rtl8192e/ieee80211/ieee80211_module.c | 8 +------ .../rtl8192e/ieee80211/ieee80211_softmac.c | 19 ++++++----------- .../staging/rtl8192e/ieee80211/ieee80211_wx.c | 21 +++++-------------- .../rtl8192su/ieee80211/ieee80211_crypt.c | 4 +--- .../rtl8192su/ieee80211/ieee80211_module.c | 4 +--- .../rtl8192su/ieee80211/ieee80211_softmac.c | 15 ++++++------- .../rtl8192su/ieee80211/ieee80211_wx.c | 17 +++++---------- 12 files changed, 37 insertions(+), 96 deletions(-) diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c index 013c3e19ae2..4c5d63fd583 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_crypt.c @@ -53,10 +53,8 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, list_del(ptr); - if (entry->ops) { + if (entry->ops) entry->ops->deinit(entry->priv); - module_put(entry->ops->owner); - } kfree(entry); } } diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c index 6fbe4890cb6..18392fce487 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_module.c @@ -189,10 +189,8 @@ void free_ieee80211(struct net_device *dev) for (i = 0; i < WEP_KEYS; i++) { struct ieee80211_crypt_data *crypt = ieee->crypt[i]; if (crypt) { - if (crypt->ops) { + if (crypt->ops) crypt->ops->deinit(crypt->priv); - module_put(crypt->ops->owner); - } kfree(crypt); ieee->crypt[i] = NULL; } diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c index 59b2ab48cdc..334e4c7ec61 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c @@ -2839,16 +2839,12 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, goto skip_host_crypt; ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { - request_module("ieee80211_crypt_wep"); + if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { - request_module("ieee80211_crypt_tkip"); + else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { - request_module("ieee80211_crypt_ccmp"); + else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } if (ops == NULL) { printk("unknown crypto alg '%s'\n", param->u.crypt.alg); param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG; @@ -2869,7 +2865,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, } memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c index 8d8bdd0a130..a08b97a0951 100644 --- a/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c @@ -331,12 +331,10 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, return -ENOMEM; memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - if (!new_crypt->ops) { - request_module("ieee80211_crypt_wep"); + if (!new_crypt->ops) new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - } - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(key); if (!new_crypt->ops || !new_crypt->priv) { @@ -483,7 +481,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; int i, idx, ret = 0; int group_key = 0; - const char *alg, *module; + const char *alg; struct ieee80211_crypto_ops *ops; struct ieee80211_crypt_data **crypt; @@ -539,15 +537,12 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, switch (ext->alg) { case IW_ENCODE_ALG_WEP: alg = "WEP"; - module = "ieee80211_crypt_wep"; break; case IW_ENCODE_ALG_TKIP: alg = "TKIP"; - module = "ieee80211_crypt_tkip"; break; case IW_ENCODE_ALG_CCMP: alg = "CCMP"; - module = "ieee80211_crypt_ccmp"; break; default: IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", @@ -558,10 +553,8 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, // printk("8-09-08-9=====>%s, alg name:%s\n",__func__, alg); ops = ieee80211_get_crypto_ops(alg); - if (ops == NULL) { - request_module(module); + if (ops == NULL) ops = ieee80211_get_crypto_ops(alg); - } if (ops == NULL) { IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", dev->name, ext->alg); @@ -581,7 +574,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, goto done; } new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(idx); if (new_crypt->priv == NULL) { kfree(new_crypt); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c index 1a8ea8a40c3..b1c54932da3 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_crypt.c @@ -53,14 +53,8 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, list_del(ptr); - if (entry->ops) { + if (entry->ops) entry->ops->deinit(entry->priv); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - module_put(entry->ops->owner); -#else - __MOD_DEC_USE_COUNT(entry->ops->owner); -#endif - } kfree(entry); } } diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c index 16256a31f99..12c2a18e1fa 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_module.c @@ -242,14 +242,8 @@ void free_ieee80211(struct net_device *dev) for (i = 0; i < WEP_KEYS; i++) { struct ieee80211_crypt_data *crypt = ieee->crypt[i]; if (crypt) { - if (crypt->ops) { + if (crypt->ops) crypt->ops->deinit(crypt->priv); -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - module_put(crypt->ops->owner); -#else - __MOD_DEC_USE_COUNT(crypt->ops->owner); -#endif - } kfree(crypt); ieee->crypt[i] = NULL; } diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c index 2fc04df872c..eae7c4579a6 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c @@ -3284,17 +3284,14 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, goto skip_host_crypt; ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { - request_module("ieee80211_crypt_wep"); + if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - //set WEP40 first, it will be modified according to WEP104 or WEP40 at other place - } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { - request_module("ieee80211_crypt_tkip"); + /* set WEP40 first, it will be modified according to WEP104 or + * WEP40 at other place */ + else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { - request_module("ieee80211_crypt_ccmp"); + else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } if (ops == NULL) { printk("unknown crypto alg '%s'\n", param->u.crypt.alg); param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG; @@ -3315,11 +3312,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, } memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ops; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) -#else - if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner)) -#endif + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c index 223483126b0..4e34a1f4c66 100644 --- a/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_wx.c @@ -482,15 +482,9 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, return -ENOMEM; memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - if (!new_crypt->ops) { - request_module("ieee80211_crypt_wep"); + if (!new_crypt->ops) new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - } -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0) - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) -#else - if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner)) -#endif + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(key); if (!new_crypt->ops || !new_crypt->priv) { @@ -644,7 +638,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; int i, idx; int group_key = 0; - const char *alg, *module; + const char *alg; struct ieee80211_crypto_ops *ops; struct ieee80211_crypt_data **crypt; @@ -711,15 +705,12 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, switch (ext->alg) { case IW_ENCODE_ALG_WEP: alg = "WEP"; - module = "ieee80211_crypt_wep"; break; case IW_ENCODE_ALG_TKIP: alg = "TKIP"; - module = "ieee80211_crypt_tkip"; break; case IW_ENCODE_ALG_CCMP: alg = "CCMP"; - module = "ieee80211_crypt_ccmp"; break; default: IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", @@ -730,10 +721,8 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, printk("alg name:%s\n",alg); ops = ieee80211_get_crypto_ops(alg); - if (ops == NULL) { - request_module(module); + if (ops == NULL) ops = ieee80211_get_crypto_ops(alg); - } if (ops == NULL) { IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", dev->name, ext->alg); @@ -758,7 +747,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, goto done; } new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(idx); if (new_crypt->priv == NULL) { kfree(new_crypt); diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c index d76a54d59d2..521e7b98993 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_crypt.c @@ -53,10 +53,8 @@ void ieee80211_crypt_deinit_entries(struct ieee80211_device *ieee, list_del(ptr); - if (entry->ops) { + if (entry->ops) entry->ops->deinit(entry->priv); - module_put(entry->ops->owner); - } kfree(entry); } } diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c index 68dc8fa094c..c3383bb8b76 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_module.c @@ -216,10 +216,8 @@ void free_ieee80211(struct net_device *dev) for (i = 0; i < WEP_KEYS; i++) { struct ieee80211_crypt_data *crypt = ieee->crypt[i]; if (crypt) { - if (crypt->ops) { + if (crypt->ops) crypt->ops->deinit(crypt->priv); - module_put(crypt->ops->owner); - } kfree(crypt); ieee->crypt[i] = NULL; } diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c index c64ae03f68a..fd8e11252f1 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_softmac.c @@ -3026,17 +3026,14 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, goto skip_host_crypt; ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) { - request_module("ieee80211_crypt_wep"); + if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - //set WEP40 first, it will be modified according to WEP104 or WEP40 at other place - } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) { - request_module("ieee80211_crypt_tkip"); + /* set WEP40 first, it will be modified according to WEP104 or + * WEP40 at other place */ + else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) { - request_module("ieee80211_crypt_ccmp"); + else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) ops = ieee80211_get_crypto_ops(param->u.crypt.alg); - } if (ops == NULL) { printk("unknown crypto alg '%s'\n", param->u.crypt.alg); param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG; @@ -3058,7 +3055,7 @@ static int ieee80211_wpa_set_encryption(struct ieee80211_device *ieee, memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx); diff --git a/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c index 10775902433..6146c6435dd 100644 --- a/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c +++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_wx.c @@ -358,11 +358,9 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee, return -ENOMEM; memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data)); new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - if (!new_crypt->ops) { - request_module("ieee80211_crypt_wep"); + if (!new_crypt->ops) new_crypt->ops = ieee80211_get_crypto_ops("WEP"); - } - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(key); if (!new_crypt->ops || !new_crypt->priv) { @@ -507,7 +505,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, struct iw_encode_ext *ext = (struct iw_encode_ext *)extra; int i, idx; int group_key = 0; - const char *alg, *module; + const char *alg; struct ieee80211_crypto_ops *ops; struct ieee80211_crypt_data **crypt; @@ -570,15 +568,12 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, switch (ext->alg) { case IW_ENCODE_ALG_WEP: alg = "WEP"; - module = "ieee80211_crypt_wep"; break; case IW_ENCODE_ALG_TKIP: alg = "TKIP"; - module = "ieee80211_crypt_tkip"; break; case IW_ENCODE_ALG_CCMP: alg = "CCMP"; - module = "ieee80211_crypt_ccmp"; break; default: IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", @@ -589,10 +584,8 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, printk("alg name:%s\n",alg); ops = ieee80211_get_crypto_ops(alg); - if (ops == NULL) { - request_module("%s", module); + if (ops == NULL) ops = ieee80211_get_crypto_ops(alg); - } if (ops == NULL) { IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n", dev->name, ext->alg); @@ -612,7 +605,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee, goto done; } new_crypt->ops = ops; - if (new_crypt->ops && try_module_get(new_crypt->ops->owner)) + if (new_crypt->ops) new_crypt->priv = new_crypt->ops->init(idx); if (new_crypt->priv == NULL) { kfree(new_crypt); -- GitLab From 9ab1b56aa02aa4d578232a8addc785c91e7b2bac Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 26 Oct 2009 16:35:32 -0700 Subject: [PATCH 0400/1165] Staging: remove stlc45xx driver It's no longer needed as the p54spi driver is the same thing, under a different name and in the correct portion of the kernel tree. Cc: Javier Martinez Canillas Cc: Christian Lamparter Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/stlc45xx/Kconfig | 8 - drivers/staging/stlc45xx/Makefile | 1 - drivers/staging/stlc45xx/stlc45xx.c | 2594 ---------------------- drivers/staging/stlc45xx/stlc45xx.h | 283 --- drivers/staging/stlc45xx/stlc45xx_lmac.h | 434 ---- 7 files changed, 3323 deletions(-) delete mode 100644 drivers/staging/stlc45xx/Kconfig delete mode 100644 drivers/staging/stlc45xx/Makefile delete mode 100644 drivers/staging/stlc45xx/stlc45xx.c delete mode 100644 drivers/staging/stlc45xx/stlc45xx.h delete mode 100644 drivers/staging/stlc45xx/stlc45xx_lmac.h diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 7df3ba4f1f4..d21b3469f6d 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -93,8 +93,6 @@ source "drivers/staging/dst/Kconfig" source "drivers/staging/pohmelfs/Kconfig" -source "drivers/staging/stlc45xx/Kconfig" - source "drivers/staging/b3dfg/Kconfig" source "drivers/staging/phison/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 74757117226..8cbf1aebea2 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_ANDROID) += android/ obj-$(CONFIG_ANDROID) += dream/ obj-$(CONFIG_DST) += dst/ obj-$(CONFIG_POHMELFS) += pohmelfs/ -obj-$(CONFIG_STLC45XX) += stlc45xx/ obj-$(CONFIG_B3DFG) += b3dfg/ obj-$(CONFIG_IDE_PHISON) += phison/ obj-$(CONFIG_PLAN9AUTH) += p9auth/ diff --git a/drivers/staging/stlc45xx/Kconfig b/drivers/staging/stlc45xx/Kconfig deleted file mode 100644 index 947fb75a9c6..00000000000 --- a/drivers/staging/stlc45xx/Kconfig +++ /dev/null @@ -1,8 +0,0 @@ -config STLC45XX - tristate "stlc4550/4560 support" - depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS - ---help--- - This is a driver for stlc4550 and stlc4560 chipsets. - - To compile this driver as a module, choose M here: the module will be - called stlc45xx. If unsure, say N. diff --git a/drivers/staging/stlc45xx/Makefile b/drivers/staging/stlc45xx/Makefile deleted file mode 100644 index 7ee32903055..00000000000 --- a/drivers/staging/stlc45xx/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_STLC45XX) += stlc45xx.o diff --git a/drivers/staging/stlc45xx/stlc45xx.c b/drivers/staging/stlc45xx/stlc45xx.c deleted file mode 100644 index be99eb33d81..00000000000 --- a/drivers/staging/stlc45xx/stlc45xx.c +++ /dev/null @@ -1,2594 +0,0 @@ -/* - * This file is part of stlc45xx - * - * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). - * - * Contact: Kalle Valo - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include "stlc45xx.h" - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "stlc45xx_lmac.h" - -/* - * gpios should be handled in board files and provided via platform data, - * but because it's currently impossible for stlc45xx to have a header file - * in include/linux, let's use module paramaters for now - */ -static int stlc45xx_gpio_power = 97; -module_param(stlc45xx_gpio_power, int, 0444); -MODULE_PARM_DESC(stlc45xx_gpio_power, "stlc45xx gpio number for power line"); - -static int stlc45xx_gpio_irq = 87; -module_param(stlc45xx_gpio_irq, int, 0444); -MODULE_PARM_DESC(stlc45xx_gpio_irq, "stlc45xx gpio number for irq line"); - -static const u8 default_cal_channels[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c, 0x09, - 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, - 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xe0, 0x00, 0xe0, 0x00, - 0xe0, 0x00, 0xe0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, - 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, - 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, - 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, - 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, - 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, - 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, - 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x71, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, - 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, - 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, - 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, - 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, - 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, - 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, - 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, - 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, - 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, - 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, - 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, - 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, - 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, - 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, - 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, - 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, - 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, - 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, - 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7b, 0x09, 0x00, 0x00, 0xc9, 0xff, - 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, - 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, - 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, - 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, - 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, - 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, - 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, - 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, - 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, - 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x80, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, - 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, - 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, - 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, - 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, - 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, - 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, - 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, - 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, - 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x85, 0x09, 0x00, 0x00, 0xc9, - 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, - 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, - 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, - 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, - 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, - 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, - 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, - 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, - 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, - 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x8a, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, - 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, - 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, - 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, - 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, - 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, - 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, - 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, - 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, - 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x09, 0x00, 0x00, - 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, - 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, - 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, - 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, - 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, - 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, - 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, - 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, - 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x94, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, - 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, - 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, - 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, - 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, - 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, - 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, - 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, - 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, - 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0x09, 0x00, - 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, - 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, - 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, - 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, - 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, - 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, - 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, - 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, - 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, - 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, - 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, - 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, - 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x9e, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, - 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, - 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, - 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, - 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, - 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, - 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, - 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, - 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, - 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, - 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, - 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, - 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, - 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, - 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, - 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, - 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, - 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, - 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00 }; - -static const u8 default_cal_rssi[] = { - 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, - 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, - 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, - 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, - 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, - 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, - 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, - 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00 }; - -static void stlc45xx_tx_edcf(struct stlc45xx *stlc); -static void stlc45xx_tx_setup(struct stlc45xx *stlc); -static void stlc45xx_tx_scan(struct stlc45xx *stlc); -static void stlc45xx_tx_psm(struct stlc45xx *stlc, bool enable); -static int stlc45xx_tx_nullfunc(struct stlc45xx *stlc, bool powersave); -static int stlc45xx_tx_pspoll(struct stlc45xx *stlc, bool powersave); - -static ssize_t stlc45xx_sysfs_show_cal_rssi(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct stlc45xx *stlc = dev_get_drvdata(dev); - ssize_t len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - len = PAGE_SIZE; - - mutex_lock(&stlc->mutex); - - if (stlc->cal_rssi) - hex_dump_to_buffer(stlc->cal_rssi, RSSI_CAL_ARRAY_LEN, 16, - 2, buf, len, 0); - mutex_unlock(&stlc->mutex); - - len = strlen(buf); - - return len; -} - -static ssize_t stlc45xx_sysfs_store_cal_rssi(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct stlc45xx *stlc = dev_get_drvdata(dev); - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - if (count != RSSI_CAL_ARRAY_LEN) { - stlc45xx_error("invalid cal_rssi length: %zu", count); - count = 0; - goto out_unlock; - } - - kfree(stlc->cal_rssi); - - stlc->cal_rssi = kmemdup(buf, RSSI_CAL_ARRAY_LEN, GFP_KERNEL); - - if (!stlc->cal_rssi) { - stlc45xx_error("failed to allocate memory for cal_rssi"); - count = 0; - goto out_unlock; - } - - out_unlock: - mutex_unlock(&stlc->mutex); - - return count; -} - -static ssize_t stlc45xx_sysfs_show_cal_channels(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct stlc45xx *stlc = dev_get_drvdata(dev); - ssize_t len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - len = PAGE_SIZE; - - mutex_lock(&stlc->mutex); - - if (stlc->cal_channels) - hex_dump_to_buffer(stlc->cal_channels, CHANNEL_CAL_ARRAY_LEN, - 16, 2, buf, len, 0); - - mutex_unlock(&stlc->mutex); - - len = strlen(buf); - - return len; -} - -static ssize_t stlc45xx_sysfs_store_cal_channels(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct stlc45xx *stlc = dev_get_drvdata(dev); - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - if (count != CHANNEL_CAL_ARRAY_LEN) { - stlc45xx_error("invalid cal_channels size: %zu ", count); - count = 0; - goto out_unlock; - } - - kfree(stlc->cal_channels); - - stlc->cal_channels = kmemdup(buf, count, GFP_KERNEL); - - if (!stlc->cal_channels) { - stlc45xx_error("failed to allocate memory for cal_channels"); - count = 0; - goto out_unlock; - } - -out_unlock: - mutex_unlock(&stlc->mutex); - - return count; -} - -static ssize_t stlc45xx_sysfs_show_tx_buf(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct stlc45xx *stlc = dev_get_drvdata(dev); - struct txbuffer *entry; - ssize_t len = 0; - - stlc45xx_debug(DEBUG_FUNC, "%s()", __func__); - - mutex_lock(&stlc->mutex); - - list_for_each_entry(entry, &stlc->tx_sent, tx_list) { - len += sprintf(buf + len, "0x%x: 0x%x-0x%x\n", - entry->handle, entry->start, - entry->end); - } - - mutex_unlock(&stlc->mutex); - - return len; -} - -static DEVICE_ATTR(cal_rssi, S_IRUGO | S_IWUSR, - stlc45xx_sysfs_show_cal_rssi, - stlc45xx_sysfs_store_cal_rssi); -static DEVICE_ATTR(cal_channels, S_IRUGO | S_IWUSR, - stlc45xx_sysfs_show_cal_channels, - stlc45xx_sysfs_store_cal_channels); -static DEVICE_ATTR(tx_buf, S_IRUGO, stlc45xx_sysfs_show_tx_buf, NULL); - -static void stlc45xx_spi_read(struct stlc45xx *stlc, unsigned long addr, - void *buf, size_t len) -{ - struct spi_transfer t[2]; - struct spi_message m; - - /* We first push the address */ - addr = (addr << 8) | ADDR_READ_BIT_15; - - spi_message_init(&m); - memset(t, 0, sizeof(t)); - - t[0].tx_buf = &addr; - t[0].len = 2; - spi_message_add_tail(&t[0], &m); - - t[1].rx_buf = buf; - t[1].len = len; - spi_message_add_tail(&t[1], &m); - - spi_sync(stlc->spi, &m); -} - - -static void stlc45xx_spi_write(struct stlc45xx *stlc, unsigned long addr, - void *buf, size_t len) -{ - struct spi_transfer t[3]; - struct spi_message m; - u16 last_word; - - /* We first push the address */ - addr = addr << 8; - - spi_message_init(&m); - memset(t, 0, sizeof(t)); - - t[0].tx_buf = &addr; - t[0].len = 2; - spi_message_add_tail(&t[0], &m); - - t[1].tx_buf = buf; - t[1].len = len; - spi_message_add_tail(&t[1], &m); - - if (len % 2) { - last_word = ((u8 *)buf)[len - 1]; - - t[2].tx_buf = &last_word; - t[2].len = 2; - spi_message_add_tail(&t[2], &m); - } - - spi_sync(stlc->spi, &m); -} - -static u16 stlc45xx_read16(struct stlc45xx *stlc, unsigned long addr) -{ - u16 val; - - stlc45xx_spi_read(stlc, addr, &val, sizeof(val)); - - return val; -} - -static u32 stlc45xx_read32(struct stlc45xx *stlc, unsigned long addr) -{ - u32 val; - - stlc45xx_spi_read(stlc, addr, &val, sizeof(val)); - - return val; -} - -static void stlc45xx_write16(struct stlc45xx *stlc, unsigned long addr, u16 val) -{ - stlc45xx_spi_write(stlc, addr, &val, sizeof(val)); -} - -static void stlc45xx_write32(struct stlc45xx *stlc, unsigned long addr, u32 val) -{ - stlc45xx_spi_write(stlc, addr, &val, sizeof(val)); -} - -struct stlc45xx_spi_reg { - u16 address; - u16 length; - char *name; -}; - -/* caller must hold tx_lock */ -static void stlc45xx_txbuffer_dump(struct stlc45xx *stlc) -{ - struct txbuffer *txbuffer; - char *buf, *pos; - int buf_len, l, count; - - if (!(DEBUG_LEVEL & DEBUG_TXBUFFER)) - return; - - stlc45xx_debug(DEBUG_FUNC, "%s()", __func__); - - buf_len = 500; - buf = kmalloc(buf_len, GFP_ATOMIC); - if (!buf) - return; - - pos = buf; - count = 0; - - list_for_each_entry(txbuffer, &stlc->txbuffer, buffer_list) { - l = snprintf(pos, buf_len, "0x%x-0x%x,", - txbuffer->start, txbuffer->end); - /* drop the null byte */ - pos += l; - buf_len -= l; - count++; - } - - if (count == 0) - *pos = '\0'; - else - *--pos = '\0'; - - stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: in buffer %d regions: %s", - count, buf); - - kfree(buf); -} - -/* caller must hold tx_lock */ -static int stlc45xx_txbuffer_find(struct stlc45xx *stlc, size_t len) -{ - struct txbuffer *txbuffer; - int pos; - - stlc45xx_debug(DEBUG_FUNC, "%s()", __func__); - - pos = FIRMWARE_TXBUFFER_START; - - if (list_empty(&stlc->txbuffer)) - goto out; - - /* - * the entries in txbuffer must be in the same order as they are in - * the real buffer - */ - list_for_each_entry(txbuffer, &stlc->txbuffer, buffer_list) { - if (pos + len < txbuffer->start) - break; - pos = ALIGN(txbuffer->end + 1, 4); - } - - if (pos + len > FIRMWARE_TXBUFFER_END) - /* not enough room */ - pos = -1; - - stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: find %zu B: 0x%x", len, pos); - -out: - return pos; -} - -static int stlc45xx_txbuffer_add(struct stlc45xx *stlc, - struct txbuffer *txbuffer) -{ - struct txbuffer *r, *prev = NULL; - - if (list_empty(&stlc->txbuffer)) { - list_add(&txbuffer->buffer_list, &stlc->txbuffer); - return 0; - } - - r = list_first_entry(&stlc->txbuffer, struct txbuffer, buffer_list); - - if (txbuffer->start < r->start) { - /* add to the beginning of the list */ - list_add(&txbuffer->buffer_list, &stlc->txbuffer); - return 0; - } - - prev = NULL; - list_for_each_entry(r, &stlc->txbuffer, buffer_list) { - /* skip first entry, we checked for that above */ - if (!prev) { - prev = r; - continue; - } - - /* double-check overlaps */ - WARN_ON_ONCE(txbuffer->start >= r->start && - txbuffer->start <= r->end); - WARN_ON_ONCE(txbuffer->end >= r->start && - txbuffer->end <= r->end); - - if (prev->end < txbuffer->start && - txbuffer->end < r->start) { - /* insert at this spot */ - list_add_tail(&txbuffer->buffer_list, &r->buffer_list); - return 0; - } - - prev = r; - } - - /* not found */ - list_add_tail(&txbuffer->buffer_list, &stlc->txbuffer); - - return 0; - -} - -/* caller must hold tx_lock */ -static struct txbuffer *stlc45xx_txbuffer_alloc(struct stlc45xx *stlc, - size_t frame_len) -{ - struct txbuffer *entry = NULL; - size_t len; - int pos; - - stlc45xx_debug(DEBUG_FUNC, "%s()", __func__); - - len = FIRMWARE_TXBUFFER_HEADER + frame_len + FIRMWARE_TXBUFFER_TRAILER; - pos = stlc45xx_txbuffer_find(stlc, len); - - if (pos < 0) - return NULL; - - WARN_ON_ONCE(pos + len > FIRMWARE_TXBUFFER_END); - WARN_ON_ONCE(pos < FIRMWARE_TXBUFFER_START); - - entry = kmalloc(sizeof(*entry), GFP_ATOMIC); - entry->start = pos; - entry->frame_start = pos + FIRMWARE_TXBUFFER_HEADER; - entry->end = entry->start + len - 1; - - stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: allocated 0x%x-0x%x", - entry->start, entry->end); - - stlc45xx_txbuffer_add(stlc, entry); - - stlc45xx_txbuffer_dump(stlc); - - return entry; -} - -/* caller must hold tx_lock */ -static void stlc45xx_txbuffer_free(struct stlc45xx *stlc, - struct txbuffer *txbuffer) -{ - stlc45xx_debug(DEBUG_FUNC, "%s()", __func__); - - stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: freed 0x%x-0x%x", - txbuffer->start, txbuffer->end); - - list_del(&txbuffer->buffer_list); - kfree(txbuffer); -} - - -static int stlc45xx_wait_bit(struct stlc45xx *stlc, u16 reg, u32 mask, - u32 expected) -{ - int i; - char buffer[4]; - - for (i = 0; i < 2000; i++) { - stlc45xx_spi_read(stlc, reg, buffer, sizeof(buffer)); - if (((*(u32 *)buffer) & mask) == expected) - return 1; - msleep(1); - } - - return 0; -} - -static int stlc45xx_request_firmware(struct stlc45xx *stlc) -{ - const struct firmware *fw; - int ret; - - /* FIXME: should driver use it's own struct device? */ - ret = request_firmware(&fw, "3826.arm", &stlc->spi->dev); - - if (ret < 0) { - stlc45xx_error("request_firmware() failed: %d", ret); - return ret; - } - - if (fw->size % 4) { - stlc45xx_error("firmware size is not multiple of 32bit: %zu", - fw->size); - return -EILSEQ; /* Illegal byte sequence */; - } - - if (fw->size < 1000) { - stlc45xx_error("firmware is too small: %zu", fw->size); - return -EILSEQ; - } - - stlc->fw = kmemdup(fw->data, fw->size, GFP_KERNEL); - if (!stlc->fw) { - stlc45xx_error("could not allocate memory for firmware"); - return -ENOMEM; - } - - stlc->fw_len = fw->size; - - release_firmware(fw); - - return 0; -} - -static int stlc45xx_upload_firmware(struct stlc45xx *stlc) -{ - struct s_dma_regs dma_regs; - unsigned long fw_len, fw_addr; - long _fw_len; - int ret; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - if (!stlc->fw) { - ret = stlc45xx_request_firmware(stlc); - if (ret < 0) - return ret; - } - - /* stop the device */ - stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT, - SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET - | SPI_CTRL_STAT_START_HALTED); - - msleep(TARGET_BOOT_SLEEP); - - stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT, - SPI_CTRL_STAT_HOST_OVERRIDE - | SPI_CTRL_STAT_START_HALTED); - - msleep(TARGET_BOOT_SLEEP); - - fw_addr = FIRMWARE_ADDRESS; - fw_len = stlc->fw_len; - - while (fw_len > 0) { - _fw_len = (fw_len > SPI_MAX_PACKET_SIZE) - ? SPI_MAX_PACKET_SIZE : fw_len; - dma_regs.cmd = SPI_DMA_WRITE_CTRL_ENABLE; - dma_regs.len = cpu_to_le16(_fw_len); - dma_regs.addr = cpu_to_le32(fw_addr); - - fw_len -= _fw_len; - fw_addr += _fw_len; - - stlc45xx_write16(stlc, SPI_ADRS_DMA_WRITE_CTRL, dma_regs.cmd); - - if (stlc45xx_wait_bit(stlc, SPI_ADRS_DMA_WRITE_CTRL, - HOST_ALLOWED, HOST_ALLOWED) == 0) { - stlc45xx_error("fw_upload not allowed to DMA write"); - return -EAGAIN; - } - - stlc45xx_write16(stlc, SPI_ADRS_DMA_WRITE_LEN, dma_regs.len); - stlc45xx_write32(stlc, SPI_ADRS_DMA_WRITE_BASE, dma_regs.addr); - - stlc45xx_spi_write(stlc, SPI_ADRS_DMA_DATA, stlc->fw, _fw_len); - - /* FIXME: I think this doesn't work if firmware is large, - * this loop goes to second round. fw->data is not - * increased at all! */ - } - - BUG_ON(fw_len != 0); - - /* enable host interrupts */ - stlc45xx_write32(stlc, SPI_ADRS_HOST_INT_EN, SPI_HOST_INTS_DEFAULT); - - /* boot the device */ - stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT, - SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET - | SPI_CTRL_STAT_RAM_BOOT); - - msleep(TARGET_BOOT_SLEEP); - - stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT, - SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT); - msleep(TARGET_BOOT_SLEEP); - - return 0; -} - -/* caller must hold tx_lock */ -static void stlc45xx_check_txsent(struct stlc45xx *stlc) -{ - struct txbuffer *entry, *n; - - list_for_each_entry_safe(entry, n, &stlc->tx_sent, tx_list) { - if (time_after(jiffies, entry->lifetime)) { - if (net_ratelimit()) - stlc45xx_warning("frame 0x%x lifetime exceeded", - entry->start); - list_del(&entry->tx_list); - skb_pull(entry->skb, entry->header_len); - ieee80211_tx_status(stlc->hw, entry->skb); - stlc45xx_txbuffer_free(stlc, entry); - } - } -} - -static void stlc45xx_power_off(struct stlc45xx *stlc) -{ - disable_irq(gpio_to_irq(stlc45xx_gpio_irq)); - gpio_set_value(stlc45xx_gpio_power, 0); -} - -static void stlc45xx_power_on(struct stlc45xx *stlc) -{ - gpio_set_value(stlc45xx_gpio_power, 1); - enable_irq(gpio_to_irq(stlc45xx_gpio_irq)); - - /* - * need to wait a while before device can be accessed, the length - * is just a guess - */ - msleep(10); -} - -/* caller must hold tx_lock */ -static void stlc45xx_flush_queues(struct stlc45xx *stlc) -{ - struct txbuffer *entry; - - while (!list_empty(&stlc->tx_sent)) { - entry = list_first_entry(&stlc->tx_sent, - struct txbuffer, tx_list); - list_del(&entry->tx_list); - dev_kfree_skb(entry->skb); - stlc45xx_txbuffer_free(stlc, entry); - } - - WARN_ON(!list_empty(&stlc->tx_sent)); - - while (!list_empty(&stlc->tx_pending)) { - entry = list_first_entry(&stlc->tx_pending, - struct txbuffer, tx_list); - list_del(&entry->tx_list); - dev_kfree_skb(entry->skb); - stlc45xx_txbuffer_free(stlc, entry); - } - - WARN_ON(!list_empty(&stlc->tx_pending)); - WARN_ON(!list_empty(&stlc->txbuffer)); -} - -static void stlc45xx_work_reset(struct work_struct *work) -{ - struct stlc45xx *stlc = container_of(work, struct stlc45xx, - work_reset); - - mutex_lock(&stlc->mutex); - - if (stlc->fw_state != FW_STATE_RESET) - goto out; - - stlc45xx_power_off(stlc); - - mutex_unlock(&stlc->mutex); - - /* wait that all work_structs have finished, we can't hold - * stlc->mutex to avoid deadlock */ - cancel_work_sync(&stlc->work); - - /* FIXME: find out good value to wait for chip power down */ - msleep(100); - - mutex_lock(&stlc->mutex); - - /* FIXME: we should gracefully handle if the state has changed - * after re-acquiring mutex */ - WARN_ON(stlc->fw_state != FW_STATE_RESET); - - spin_lock_bh(&stlc->tx_lock); - stlc45xx_flush_queues(stlc); - spin_unlock_bh(&stlc->tx_lock); - - stlc->fw_state = FW_STATE_RESETTING; - - stlc45xx_power_on(stlc); - stlc45xx_upload_firmware(stlc); - -out: - mutex_unlock(&stlc->mutex); -} - -/* caller must hold mutex */ -static void stlc45xx_reset(struct stlc45xx *stlc) -{ - stlc45xx_warning("resetting firmware"); - stlc->fw_state = FW_STATE_RESET; - ieee80211_stop_queues(stlc->hw); - queue_work(stlc->hw->workqueue, &stlc->work_reset); -} - -static void stlc45xx_work_tx_timeout(struct work_struct *work) -{ - struct stlc45xx *stlc = container_of(work, struct stlc45xx, - work_tx_timeout.work); - - stlc45xx_warning("tx timeout"); - - mutex_lock(&stlc->mutex); - - if (stlc->fw_state != FW_STATE_READY) - goto out; - - stlc45xx_reset(stlc); - -out: - mutex_unlock(&stlc->mutex); -} - -static void stlc45xx_int_ack(struct stlc45xx *stlc, u32 val) -{ - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - stlc45xx_write32(stlc, SPI_ADRS_HOST_INT_ACK, val); -} - -static void stlc45xx_wakeup(struct stlc45xx *stlc) -{ - unsigned long timeout; - u32 ints; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - /* wake the chip */ - stlc45xx_write32(stlc, SPI_ADRS_ARM_INTERRUPTS, SPI_TARGET_INT_WAKEUP); - - /* And wait for the READY interrupt */ - timeout = jiffies + HZ; - - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - while (!(ints & SPI_HOST_INT_READY)) { - if (time_after(jiffies, timeout)) - goto out; - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - } - - stlc45xx_int_ack(stlc, SPI_HOST_INT_READY); - -out: - return; -} - -static void stlc45xx_sleep(struct stlc45xx *stlc) -{ - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - stlc45xx_write32(stlc, SPI_ADRS_ARM_INTERRUPTS, SPI_TARGET_INT_SLEEP); -} - -static void stlc45xx_int_ready(struct stlc45xx *stlc) -{ - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - stlc45xx_write32(stlc, SPI_ADRS_HOST_INT_EN, - SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE); - - switch (stlc->fw_state) { - case FW_STATE_BOOTING: - stlc->fw_state = FW_STATE_READY; - complete(&stlc->fw_comp); - break; - case FW_STATE_RESETTING: - stlc->fw_state = FW_STATE_READY; - - stlc45xx_tx_scan(stlc); - stlc45xx_tx_setup(stlc); - stlc45xx_tx_edcf(stlc); - - ieee80211_wake_queues(stlc->hw); - break; - default: - break; - } -} - -static int stlc45xx_rx_txack(struct stlc45xx *stlc, struct sk_buff *skb) -{ - struct ieee80211_tx_info *info; - struct s_lm_control *control; - struct s_lmo_tx *tx; - struct txbuffer *entry; - int found = 0; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - control = (struct s_lm_control *) skb->data; - tx = (struct s_lmo_tx *) (control + 1); - - if (list_empty(&stlc->tx_sent)) { - if (net_ratelimit()) - stlc45xx_warning("no frames waiting for " - "acknowledgement"); - return -1; - } - - list_for_each_entry(entry, &stlc->tx_sent, tx_list) { - if (control->handle == entry->handle) { - found = 1; - break; - } - } - - if (!found) { - if (net_ratelimit()) - stlc45xx_warning("couldn't find frame for tx ack 0x%x", - control->handle); - return -1; - } - - stlc45xx_debug(DEBUG_TX, "TX ACK 0x%x", entry->handle); - - if (entry->status_needed) { - info = IEEE80211_SKB_CB(entry->skb); - - if (!(tx->flags & LM_TX_FAILED)) { - /* frame was acked */ - info->flags |= IEEE80211_TX_STAT_ACK; - info->status.ack_signal = tx->rcpi / 2 - 110; - } - - skb_pull(entry->skb, entry->header_len); - - ieee80211_tx_status(stlc->hw, entry->skb); - } - - list_del(&entry->tx_list); - - stlc45xx_check_txsent(stlc); - if (list_empty(&stlc->tx_sent)) - /* there are no pending frames, we can stop the tx timeout - * timer */ - cancel_delayed_work(&stlc->work_tx_timeout); - - spin_lock_bh(&stlc->tx_lock); - - stlc45xx_txbuffer_free(stlc, entry); - - if (stlc->tx_queue_stopped && - stlc45xx_txbuffer_find(stlc, MAX_FRAME_LEN) != -1) { - stlc45xx_debug(DEBUG_QUEUE, "room in tx buffer, waking queues"); - ieee80211_wake_queues(stlc->hw); - stlc->tx_queue_stopped = 0; - } - - spin_unlock_bh(&stlc->tx_lock); - - return 0; -} - -static int stlc45xx_rx_control(struct stlc45xx *stlc, struct sk_buff *skb) -{ - struct s_lm_control *control; - int ret = 0; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - control = (struct s_lm_control *) skb->data; - - switch (control->oid) { - case LM_OID_TX: - ret = stlc45xx_rx_txack(stlc, skb); - break; - case LM_OID_SETUP: - case LM_OID_SCAN: - case LM_OID_TRAP: - case LM_OID_EDCF: - case LM_OID_KEYCACHE: - case LM_OID_PSM: - case LM_OID_STATS: - case LM_OID_LED: - default: - stlc45xx_warning("unhandled rx control oid %d\n", - control->oid); - break; - } - - dev_kfree_skb(skb); - - return ret; -} - -/* copied from mac80211 */ -static void stlc45xx_parse_elems(u8 *start, size_t len, - struct stlc45xx_ie_tim **tim, - size_t *tim_len) -{ - size_t left = len; - u8 *pos = start; - - while (left >= 2) { - u8 id, elen; - - id = *pos++; - elen = *pos++; - left -= 2; - - if (elen > left) - return; - - switch (id) { - case WLAN_EID_TIM: - *tim = (struct stlc45xx_ie_tim *) pos; - *tim_len = elen; - break; - default: - break; - } - - left -= elen; - pos += elen; - } -} - -/* - * mac80211 doesn't have support for asking frames with PS-Poll, so let's - * implement in the driver for now. We have to add support to mac80211 - * later. - */ -static int stlc45xx_check_more_data(struct stlc45xx *stlc, struct sk_buff *skb) -{ - struct s_lm_data_in *data = (struct s_lm_data_in *) skb->data; - struct ieee80211_hdr *hdr; - size_t len; - u16 fc; - - hdr = (void *) skb->data + sizeof(*data); - len = skb->len - sizeof(*data); - - /* minimum frame length is the null frame length 24 bytes */ - if (len < 24) { - stlc45xx_warning("invalid frame length when checking for " - "more data"); - return -EINVAL; - } - - fc = le16_to_cpu(hdr->frame_control); - if (!(fc & IEEE80211_FCTL_FROMDS)) - /* this is not from DS */ - return 0; - - if (compare_ether_addr(hdr->addr1, stlc->mac_addr) != 0) - /* the frame was not for us */ - return 0; - - if (!(fc & IEEE80211_FCTL_MOREDATA)) { - /* AP has no more frames buffered for us */ - stlc45xx_debug(DEBUG_PSM, "all buffered frames retrieved"); - stlc->pspolling = false; - return 0; - } - - /* MOREDATA bit is set, let's ask for a new frame from the AP */ - stlc45xx_tx_pspoll(stlc, stlc->psm); - - return 0; -} - -/* - * mac80211 cannot read TIM from beacons, so let's add a hack to the - * driver. We have to add support to mac80211 later. - */ -static int stlc45xx_rx_data_beacon(struct stlc45xx *stlc, struct sk_buff *skb) -{ - struct s_lm_data_in *data = (struct s_lm_data_in *) skb->data; - size_t len = skb->len, tim_len = 0, baselen, pvbmap_len; - struct ieee80211_mgmt *mgmt; - struct stlc45xx_ie_tim *tim = NULL; - int bmap_offset, index, aid_bit; - - mgmt = (void *) skb->data + sizeof(*data); - - baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; - if (baselen > len) { - stlc45xx_warning("invalid baselen in beacon"); - return -EINVAL; - } - - stlc45xx_parse_elems(mgmt->u.beacon.variable, len - baselen, &tim, - &tim_len); - - if (!tim) { - stlc45xx_warning("didn't find tim from a beacon"); - return -EINVAL; - } - - bmap_offset = tim->bmap_control & 0xfe; - index = stlc->aid / 8 - bmap_offset; - - pvbmap_len = tim_len - 3; - if (index > pvbmap_len) - return -EINVAL; - - aid_bit = !!(tim->pvbmap[index] & (1 << stlc->aid % 8)); - - stlc45xx_debug(DEBUG_PSM, "fc 0x%x duration %d seq %d dtim %u " - "bmap_control 0x%x aid_bit %d", - mgmt->frame_control, mgmt->duration, mgmt->seq_ctrl >> 4, - tim->dtim_count, tim->bmap_control, aid_bit); - - if (!aid_bit) - return 0; - - stlc->pspolling = true; - stlc45xx_tx_pspoll(stlc, stlc->psm); - - return 0; -} - -static int stlc45xx_rx_data(struct stlc45xx *stlc, struct sk_buff *skb) -{ - struct ieee80211_rx_status status; - struct s_lm_data_in *data = (struct s_lm_data_in *) skb->data; - int align = 0; - u8 *p, align_len; - u16 len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - if (stlc->psm) { - if (data->flags & LM_IN_BEACON) - stlc45xx_rx_data_beacon(stlc, skb); - else if (stlc->pspolling && (data->flags & LM_IN_DATA)) - stlc45xx_check_more_data(stlc, skb); - } - - memset(&status, 0, sizeof(status)); - - status.freq = data->frequency; - status.signal = data->rcpi / 2 - 110; - - /* let's assume that maximum rcpi value is 140 (= 35 dBm) */ - status.qual = data->rcpi * 100 / 140; - - status.band = IEEE80211_BAND_2GHZ; - - /* - * FIXME: this gives warning from __ieee80211_rx() - * - * status.rate_idx = data->rate; - */ - - len = data->length; - - if (data->flags & LM_FLAG_ALIGN) - align = 1; - - skb_pull(skb, sizeof(*data)); - - if (align) { - p = skb->data; - align_len = *p; - skb_pull(skb, align_len); - } - - skb_trim(skb, len); - - stlc45xx_debug(DEBUG_RX, "rx data 0x%p %d B", skb->data, skb->len); - stlc45xx_dump(DEBUG_RX_CONTENT, skb->data, skb->len); - - memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status)); - ieee80211_rx(stlc->hw, skb); - - return 0; -} - - - -static int stlc45xx_rx(struct stlc45xx *stlc) -{ - struct s_lm_control *control; - struct sk_buff *skb; - int ret; - u16 len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - stlc45xx_wakeup(stlc); - - /* dummy read to flush SPI DMA controller bug */ - stlc45xx_read16(stlc, SPI_ADRS_GEN_PURP_1); - - len = stlc45xx_read16(stlc, SPI_ADRS_DMA_DATA); - - if (len == 0) { - stlc45xx_warning("rx request of zero bytes"); - return 0; - } - - skb = dev_alloc_skb(len); - if (!skb) { - stlc45xx_warning("could not alloc skb"); - return 0; - } - - stlc45xx_spi_read(stlc, SPI_ADRS_DMA_DATA, skb_put(skb, len), len); - - stlc45xx_sleep(stlc); - - stlc45xx_debug(DEBUG_RX, "rx frame 0x%p %d B", skb->data, skb->len); - stlc45xx_dump(DEBUG_RX_CONTENT, skb->data, skb->len); - - control = (struct s_lm_control *) skb->data; - - if (control->flags & LM_FLAG_CONTROL) - ret = stlc45xx_rx_control(stlc, skb); - else - ret = stlc45xx_rx_data(stlc, skb); - - return ret; -} - - -static irqreturn_t stlc45xx_interrupt(int irq, void *config) -{ - struct spi_device *spi = config; - struct stlc45xx *stlc = dev_get_drvdata(&spi->dev); - - stlc45xx_debug(DEBUG_IRQ, "IRQ"); - - queue_work(stlc->hw->workqueue, &stlc->work); - - return IRQ_HANDLED; -} - -static int stlc45xx_tx_frame(struct stlc45xx *stlc, u32 address, - void *buf, size_t len) -{ - struct s_dma_regs dma_regs; - unsigned long timeout; - int ret = 0; - u32 ints; - - stlc->tx_frames++; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - stlc45xx_debug(DEBUG_TX, "tx frame 0x%p %zu B", buf, len); - stlc45xx_dump(DEBUG_TX_CONTENT, buf, len); - - stlc45xx_wakeup(stlc); - - dma_regs.cmd = SPI_DMA_WRITE_CTRL_ENABLE; - dma_regs.len = cpu_to_le16(len); - dma_regs.addr = cpu_to_le32(address); - - stlc45xx_spi_write(stlc, SPI_ADRS_DMA_WRITE_CTRL, &dma_regs, - sizeof(dma_regs)); - - stlc45xx_spi_write(stlc, SPI_ADRS_DMA_DATA, buf, len); - - timeout = jiffies + 2 * HZ; - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - while (!(ints & SPI_HOST_INT_WR_READY)) { - if (time_after(jiffies, timeout)) { - stlc45xx_warning("WR_READY timeout"); - ret = -1; - goto out; - } - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - } - - stlc45xx_int_ack(stlc, SPI_HOST_INT_WR_READY); - - stlc45xx_sleep(stlc); - -out: - return ret; -} - -static int stlc45xx_wq_tx(struct stlc45xx *stlc) -{ - struct txbuffer *entry; - int ret = 0; - - spin_lock_bh(&stlc->tx_lock); - - while (!list_empty(&stlc->tx_pending)) { - entry = list_entry(stlc->tx_pending.next, - struct txbuffer, tx_list); - - list_del_init(&entry->tx_list); - - spin_unlock_bh(&stlc->tx_lock); - - ret = stlc45xx_tx_frame(stlc, entry->frame_start, - entry->skb->data, entry->skb->len); - - spin_lock_bh(&stlc->tx_lock); - - if (ret < 0) { - /* frame transfer to firmware buffer failed */ - /* FIXME: report this to mac80211 */ - dev_kfree_skb(entry->skb); - stlc45xx_txbuffer_free(stlc, entry); - goto out; - } - - list_add(&entry->tx_list, &stlc->tx_sent); - queue_delayed_work(stlc->hw->workqueue, - &stlc->work_tx_timeout, - msecs_to_jiffies(TX_TIMEOUT)); - } - -out: - spin_unlock_bh(&stlc->tx_lock); - return ret; -} - -static void stlc45xx_work(struct work_struct *work) -{ - struct stlc45xx *stlc = container_of(work, struct stlc45xx, work); - u32 ints; - int ret; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - if (stlc->fw_state == FW_STATE_OFF && - stlc->fw_state == FW_STATE_RESET) - goto out; - - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - stlc45xx_debug(DEBUG_BH, "begin host_ints 0x%08x", ints); - - if (ints & SPI_HOST_INT_READY) { - stlc45xx_int_ready(stlc); - stlc45xx_int_ack(stlc, SPI_HOST_INT_READY); - } - - if (stlc->fw_state != FW_STATE_READY) - goto out; - - if (ints & SPI_HOST_INT_UPDATE) { - stlc45xx_int_ack(stlc, SPI_HOST_INT_UPDATE); - ret = stlc45xx_rx(stlc); - if (ret < 0) { - stlc45xx_reset(stlc); - goto out; - } - } - if (ints & SPI_HOST_INT_SW_UPDATE) { - stlc45xx_int_ack(stlc, SPI_HOST_INT_SW_UPDATE); - ret = stlc45xx_rx(stlc); - if (ret < 0) { - stlc45xx_reset(stlc); - goto out; - } - } - - ret = stlc45xx_wq_tx(stlc); - if (ret < 0) { - stlc45xx_reset(stlc); - goto out; - } - - ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS); - stlc45xx_debug(DEBUG_BH, "end host_ints 0x%08x", ints); - -out: - mutex_unlock(&stlc->mutex); -} - -static void stlc45xx_tx_edcf(struct stlc45xx *stlc) -{ - struct s_lm_control *control; - struct s_lmo_edcf *edcf; - size_t len, edcf_len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - edcf_len = sizeof(*edcf); - len = sizeof(*control) + edcf_len; - control = kzalloc(len, GFP_KERNEL); - edcf = (struct s_lmo_edcf *) (control + 1); - - control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET; - control->length = edcf_len; - control->oid = LM_OID_EDCF; - - edcf->slottime = 0x14; - edcf->sifs = 10; - edcf->eofpad = 6; - edcf->maxburst = 1500; - - edcf->queues[0].aifs = 2; - edcf->queues[0].pad0 = 1; - edcf->queues[0].cwmin = 3; - edcf->queues[0].cwmax = 7; - edcf->queues[0].txop = 47; - edcf->queues[1].aifs = 2; - edcf->queues[1].pad0 = 0; - edcf->queues[1].cwmin = 7; - edcf->queues[1].cwmax = 15; - edcf->queues[1].txop = 94; - edcf->queues[2].aifs = 3; - edcf->queues[2].pad0 = 0; - edcf->queues[2].cwmin = 15; - edcf->queues[2].cwmax = 1023; - edcf->queues[2].txop = 0; - edcf->queues[3].aifs = 7; - edcf->queues[3].pad0 = 0; - edcf->queues[3].cwmin = 15; - edcf->queues[3].cwmax = 1023; - edcf->queues[3].txop = 0; - edcf->queues[4].aifs = 13; - edcf->queues[4].pad0 = 99; - edcf->queues[4].cwmin = 3437; - edcf->queues[4].cwmax = 512; - edcf->queues[4].txop = 12; - edcf->queues[5].aifs = 142; - edcf->queues[5].pad0 = 109; - edcf->queues[5].cwmin = 8756; - edcf->queues[5].cwmax = 6; - edcf->queues[5].txop = 0; - edcf->queues[6].aifs = 4; - edcf->queues[6].pad0 = 0; - edcf->queues[6].cwmin = 0; - edcf->queues[6].cwmax = 58705; - edcf->queues[6].txop = 25716; - edcf->queues[7].aifs = 0; - edcf->queues[7].pad0 = 0; - edcf->queues[7].cwmin = 0; - edcf->queues[7].cwmax = 0; - edcf->queues[7].txop = 0; - - stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len); - - kfree(control); -} - -static void stlc45xx_tx_setup(struct stlc45xx *stlc) -{ - struct s_lm_control *control; - struct s_lmo_setup *setup; - size_t len, setup_len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - setup_len = sizeof(*setup); - len = sizeof(*control) + setup_len; - control = kzalloc(len, GFP_KERNEL); - setup = (struct s_lmo_setup *) (control + 1); - - control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET; - control->length = setup_len; - control->oid = LM_OID_SETUP; - - setup->flags = LM_SETUP_INFRA; - setup->antenna = 2; - setup->rx_align = 0; - setup->rx_buffer = FIRMWARE_RXBUFFER_START; - setup->rx_mtu = FIRMWARE_MTU; - setup->frontend = 5; - setup->timeout = 0; - setup->truncate = 48896; - setup->bratemask = 0xffffffff; - setup->ref_clock = 644245094; - setup->lpf_bandwidth = 65535; - setup->osc_start_delay = 65535; - - memcpy(setup->macaddr, stlc->mac_addr, ETH_ALEN); - memcpy(setup->bssid, stlc->bssid, ETH_ALEN); - - stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len); - - kfree(control); -} - -static void stlc45xx_tx_scan(struct stlc45xx *stlc) -{ - struct s_lm_control *control; - struct s_lmo_scan *scan; - size_t len, scan_len; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - scan_len = sizeof(*scan); - len = sizeof(*control) + scan_len; - control = kzalloc(len, GFP_KERNEL); - scan = (struct s_lmo_scan *) (control + 1); - - control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET; - control->length = scan_len; - control->oid = LM_OID_SCAN; - - scan->flags = LM_SCAN_EXIT; - scan->bratemask = 0x15f; - scan->aloft[0] = 3; - scan->aloft[1] = 3; - scan->aloft[2] = 1; - scan->aloft[3] = 0; - scan->aloft[4] = 0; - scan->aloft[5] = 0; - scan->aloft[6] = 0; - scan->aloft[7] = 0; - - memcpy(&scan->rssical, &stlc->cal_rssi[(stlc->channel - 1) * - RSSI_CAL_LEN], - RSSI_CAL_LEN); - memcpy(&scan->channel, &stlc->cal_channels[(stlc->channel - 1) * - CHANNEL_CAL_LEN], - CHANNEL_CAL_LEN); - - stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len); - - kfree(control); -} - -/* - * caller must hold mutex - */ -static int stlc45xx_tx_pspoll(struct stlc45xx *stlc, bool powersave) -{ - struct ieee80211_hdr *pspoll; - int payload_len, padding, i; - struct s_lm_data_out *data; - struct txbuffer *entry; - struct sk_buff *skb; - char *payload; - u16 fc; - - skb = dev_alloc_skb(stlc->hw->extra_tx_headroom + 16); - if (!skb) { - stlc45xx_warning("failed to allocate pspoll frame"); - return -ENOMEM; - } - skb_reserve(skb, stlc->hw->extra_tx_headroom); - - pspoll = (struct ieee80211_hdr *) skb_put(skb, 16); - memset(pspoll, 0, 16); - fc = IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL; - if (powersave) - fc |= IEEE80211_FCTL_PM; - pspoll->frame_control = cpu_to_le16(fc); - pspoll->duration_id = cpu_to_le16(stlc->aid); - - /* aid in PS-Poll has its two MSBs each set to 1 */ - pspoll->duration_id |= cpu_to_le16(1 << 15) | cpu_to_le16(1 << 14); - - memcpy(pspoll->addr1, stlc->bssid, ETH_ALEN); - memcpy(pspoll->addr2, stlc->mac_addr, ETH_ALEN); - - stlc45xx_debug(DEBUG_PSM, "sending PS-Poll frame to %pM (powersave %d, " - "fc 0x%x, aid %d)", pspoll->addr1, - powersave, fc, stlc->aid); - - spin_lock_bh(&stlc->tx_lock); - - entry = stlc45xx_txbuffer_alloc(stlc, skb->len); - - spin_unlock_bh(&stlc->tx_lock); - - if (!entry) { - /* - * The queue should be stopped before the firmware buffer - * is full, so firmware buffer should always have enough - * space. - * - * But I'm too lazy and omit it for now. - */ - if (net_ratelimit()) - stlc45xx_warning("firmware tx buffer full is full " - "for null frame"); - return -ENOSPC; - } - - payload = skb->data; - payload_len = skb->len; - padding = (int) (skb->data - sizeof(*data)) & 3; - entry->header_len = sizeof(*data) + padding; - - entry->skb = skb; - entry->status_needed = false; - entry->handle = (u32) skb; - entry->lifetime = jiffies + msecs_to_jiffies(TX_FRAME_LIFETIME); - - stlc45xx_debug(DEBUG_TX, "tx data 0x%x (0x%p payload %d B " - "padding %d header_len %d)", - entry->handle, payload, payload_len, padding, - entry->header_len); - stlc45xx_dump(DEBUG_TX_CONTENT, payload, payload_len); - - data = (struct s_lm_data_out *) skb_push(skb, entry->header_len); - - memset(data, 0, entry->header_len); - - if (padding) - data->flags = LM_FLAG_ALIGN; - - data->flags = LM_OUT_BURST; - data->length = payload_len; - data->handle = entry->handle; - data->aid = 1; - data->rts_retries = 7; - data->retries = 7; - data->aloft_ctrl = 0; - data->crypt_offset = 58; - data->keytype = 0; - data->keylen = 0; - data->queue = LM_QUEUE_DATA3; - data->backlog = 32; - data->antenna = 2; - data->cts = 3; - data->power = 127; - - for (i = 0; i < 8; i++) - data->aloft[i] = 0; - - /* - * check if there's enough space in tx buffer - * - * FIXME: ignored for now - */ - - stlc45xx_tx_frame(stlc, entry->start, skb->data, skb->len); - - list_add(&entry->tx_list, &stlc->tx_sent); - - return 0; -} - -/* - * caller must hold mutex - * - * shamelessly stolen from mac80211/ieee80211_send_nullfunc - */ -static int stlc45xx_tx_nullfunc(struct stlc45xx *stlc, bool powersave) -{ - struct ieee80211_hdr *nullfunc; - int payload_len, padding, i; - struct s_lm_data_out *data; - struct txbuffer *entry; - struct sk_buff *skb; - char *payload; - u16 fc; - - skb = dev_alloc_skb(stlc->hw->extra_tx_headroom + 24); - if (!skb) { - stlc45xx_warning("failed to allocate buffer for null frame\n"); - return -ENOMEM; - } - skb_reserve(skb, stlc->hw->extra_tx_headroom); - - nullfunc = (struct ieee80211_hdr *) skb_put(skb, 24); - memset(nullfunc, 0, 24); - fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC | - IEEE80211_FCTL_TODS; - - if (powersave) - fc |= IEEE80211_FCTL_PM; - - nullfunc->frame_control = cpu_to_le16(fc); - memcpy(nullfunc->addr1, stlc->bssid, ETH_ALEN); - memcpy(nullfunc->addr2, stlc->mac_addr, ETH_ALEN); - memcpy(nullfunc->addr3, stlc->bssid, ETH_ALEN); - - stlc45xx_debug(DEBUG_PSM, "sending Null frame to %pM (powersave %d, " - "fc 0x%x)", nullfunc->addr1, powersave, fc); - - spin_lock_bh(&stlc->tx_lock); - - entry = stlc45xx_txbuffer_alloc(stlc, skb->len); - - spin_unlock_bh(&stlc->tx_lock); - - if (!entry) { - /* - * The queue should be stopped before the firmware buffer - * is full, so firmware buffer should always have enough - * space. - * - * But I'm too lazy and omit it for now. - */ - if (net_ratelimit()) - stlc45xx_warning("firmware tx buffer full is full " - "for null frame"); - return -ENOSPC; - } - - payload = skb->data; - payload_len = skb->len; - padding = (int) (skb->data - sizeof(*data)) & 3; - entry->header_len = sizeof(*data) + padding; - - entry->skb = skb; - entry->status_needed = false; - entry->handle = (u32) skb; - entry->lifetime = jiffies + msecs_to_jiffies(TX_FRAME_LIFETIME); - - stlc45xx_debug(DEBUG_TX, "tx data 0x%x (0x%p payload %d B " - "padding %d header_len %d)", - entry->handle, payload, payload_len, padding, - entry->header_len); - stlc45xx_dump(DEBUG_TX_CONTENT, payload, payload_len); - - data = (struct s_lm_data_out *) skb_push(skb, entry->header_len); - - memset(data, 0, entry->header_len); - - if (padding) - data->flags = LM_FLAG_ALIGN; - - data->flags = LM_OUT_BURST; - data->length = payload_len; - data->handle = entry->handle; - data->aid = 1; - data->rts_retries = 7; - data->retries = 7; - data->aloft_ctrl = 0; - data->crypt_offset = 58; - data->keytype = 0; - data->keylen = 0; - data->queue = LM_QUEUE_DATA3; - data->backlog = 32; - data->antenna = 2; - data->cts = 3; - data->power = 127; - - for (i = 0; i < 8; i++) - data->aloft[i] = 0; - - /* - * check if there's enough space in tx buffer - * - * FIXME: ignored for now - */ - - stlc45xx_tx_frame(stlc, entry->start, skb->data, skb->len); - - list_add(&entry->tx_list, &stlc->tx_sent); - - return 0; -} - -/* caller must hold mutex */ -static void stlc45xx_tx_psm(struct stlc45xx *stlc, bool enable) -{ - struct s_lm_control *control; - struct s_lmo_psm *psm; - size_t len, psm_len; - - WARN_ON(!stlc->associated); - WARN_ON(stlc->aid < 1); - WARN_ON(stlc->aid > 2007); - - psm_len = sizeof(*psm); - len = sizeof(*control) + psm_len; - control = kzalloc(len, GFP_KERNEL); - psm = (struct s_lmo_psm *) (control + 1); - - control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET; - control->length = psm_len; - control->oid = LM_OID_PSM; - - if (enable) - psm->flags |= LM_PSM; - - psm->aid = stlc->aid; - - psm->beacon_rcpi_skip_max = 60; - - psm->intervals[0].interval = 1; - psm->intervals[0].periods = 1; - psm->intervals[1].interval = 1; - psm->intervals[1].periods = 1; - psm->intervals[2].interval = 1; - psm->intervals[2].periods = 1; - psm->intervals[3].interval = 1; - psm->intervals[3].periods = 1; - - psm->nr = 0; - psm->exclude[0] = 0; - - stlc45xx_debug(DEBUG_PSM, "sending LM_OID_PSM (aid %d, interval %d)", - psm->aid, psm->intervals[0].interval); - - stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len); - - kfree(control); -} - -static int stlc45xx_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) -{ - struct stlc45xx *stlc = hw->priv; - struct ieee80211_tx_info *info; - struct ieee80211_rate *rate; - int payload_len, padding, i; - struct s_lm_data_out *data; - struct txbuffer *entry; - char *payload; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - spin_lock_bh(&stlc->tx_lock); - - entry = stlc45xx_txbuffer_alloc(stlc, skb->len); - if (!entry) { - /* the queue should be stopped before the firmware buffer - * is full, so firmware buffer should always have enough - * space */ - if (net_ratelimit()) - stlc45xx_warning("firmware buffer full"); - spin_unlock_bh(&stlc->tx_lock); - return NETDEV_TX_BUSY; - } - - info = IEEE80211_SKB_CB(skb); - - payload = skb->data; - payload_len = skb->len; - padding = (int) (skb->data - sizeof(*data)) & 3; - entry->header_len = sizeof(*data) + padding; - - entry->skb = skb; - entry->status_needed = true; - entry->handle = (u32) skb; - entry->lifetime = jiffies + msecs_to_jiffies(TX_FRAME_LIFETIME); - - stlc45xx_debug(DEBUG_TX, "tx data 0x%x (0x%p payload %d B " - "padding %d header_len %d)", - entry->handle, payload, payload_len, padding, - entry->header_len); - stlc45xx_dump(DEBUG_TX_CONTENT, payload, payload_len); - - data = (struct s_lm_data_out *) skb_push(skb, entry->header_len); - - memset(data, 0, entry->header_len); - - if (padding) - data->flags = LM_FLAG_ALIGN; - - data->flags = LM_OUT_BURST; - data->length = payload_len; - data->handle = entry->handle; - data->aid = 1; - data->rts_retries = 7; - data->retries = 7; - data->aloft_ctrl = 0; - data->crypt_offset = 58; - data->keytype = 0; - data->keylen = 0; - data->queue = 2; - data->backlog = 32; - data->antenna = 2; - data->cts = 3; - data->power = 127; - - for (i = 0; i < 8; i++) { - rate = ieee80211_get_tx_rate(stlc->hw, info); - data->aloft[i] = rate->hw_value; - } - - list_add_tail(&entry->tx_list, &stlc->tx_pending); - - /* check if there's enough space in tx buffer */ - if (stlc45xx_txbuffer_find(stlc, MAX_FRAME_LEN) == -1) { - stlc45xx_debug(DEBUG_QUEUE, "tx buffer full, stopping queues"); - stlc->tx_queue_stopped = 1; - ieee80211_stop_queues(stlc->hw); - } - - queue_work(stlc->hw->workqueue, &stlc->work); - - spin_unlock_bh(&stlc->tx_lock); - - return NETDEV_TX_OK; -} - -static int stlc45xx_op_start(struct ieee80211_hw *hw) -{ - struct stlc45xx *stlc = hw->priv; - unsigned long timeout; - int ret = 0; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - stlc->fw_state = FW_STATE_BOOTING; - stlc->channel = 1; - - stlc45xx_power_on(stlc); - - ret = stlc45xx_upload_firmware(stlc); - if (ret < 0) { - stlc45xx_power_off(stlc); - goto out_unlock; - } - - stlc->tx_queue_stopped = 0; - - mutex_unlock(&stlc->mutex); - - timeout = msecs_to_jiffies(2000); - timeout = wait_for_completion_interruptible_timeout(&stlc->fw_comp, - timeout); - if (!timeout) { - stlc45xx_error("firmware boot failed"); - stlc45xx_power_off(stlc); - ret = -1; - goto out; - } - - stlc45xx_debug(DEBUG_BOOT, "firmware booted"); - - /* FIXME: should we take mutex just after wait_for_completion()? */ - mutex_lock(&stlc->mutex); - - WARN_ON(stlc->fw_state != FW_STATE_READY); - -out_unlock: - mutex_unlock(&stlc->mutex); - -out: - return ret; -} - -static void stlc45xx_op_stop(struct ieee80211_hw *hw) -{ - struct stlc45xx *stlc = hw->priv; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - WARN_ON(stlc->fw_state != FW_STATE_READY); - - stlc45xx_power_off(stlc); - - /* FIXME: make sure that all work_structs have completed */ - - spin_lock_bh(&stlc->tx_lock); - stlc45xx_flush_queues(stlc); - spin_unlock_bh(&stlc->tx_lock); - - stlc->fw_state = FW_STATE_OFF; - - mutex_unlock(&stlc->mutex); -} - -static int stlc45xx_op_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct stlc45xx *stlc = hw->priv; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - switch (conf->type) { - case NL80211_IFTYPE_STATION: - break; - default: - return -EOPNOTSUPP; - } - - memcpy(stlc->mac_addr, conf->mac_addr, ETH_ALEN); - - return 0; -} - -static void stlc45xx_op_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); -} - -static int stlc45xx_op_config(struct ieee80211_hw *hw, u32 changed) -{ - struct stlc45xx *stlc = hw->priv; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - mutex_lock(&stlc->mutex); - - stlc->channel = hw->conf.channel->hw_value; - stlc45xx_tx_scan(stlc); - stlc45xx_tx_setup(stlc); - stlc45xx_tx_edcf(stlc); - - if ((hw->conf.flags & IEEE80211_CONF_PS) != stlc->psm) { - stlc->psm = hw->conf.flags & IEEE80211_CONF_PS; - if (stlc->associated) { - stlc45xx_tx_psm(stlc, stlc->psm); - stlc45xx_tx_nullfunc(stlc, stlc->psm); - } - } - - mutex_unlock(&stlc->mutex); - - return 0; -} - -static void stlc45xx_op_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_addr_list *mc_list) -{ - *total_flags = 0; -} - -static void stlc45xx_op_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *info, - u32 changed) -{ - struct stlc45xx *stlc = hw->priv; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - mutex_lock(&stlc->mutex); - - memcpy(stlc->bssid, info->bssid, ETH_ALEN); - stlc45xx_tx_setup(stlc); - - mutex_unlock(&stlc->mutex); - - if (changed & BSS_CHANGED_ASSOC) { - stlc->associated = info->assoc; - if (info->assoc) - stlc->aid = info->aid; - else - stlc->aid = -1; - - if (stlc->psm) { - stlc45xx_tx_psm(stlc, stlc->psm); - stlc45xx_tx_nullfunc(stlc, stlc->psm); - } - } -} - - -/* can't be const, mac80211 writes to this */ -static struct ieee80211_rate stlc45xx_rates[] = { - { .bitrate = 10, .hw_value = 0, .hw_value_short = 0, }, - { .bitrate = 20, .hw_value = 1, .hw_value_short = 1, }, - { .bitrate = 55, .hw_value = 2, .hw_value_short = 2, }, - { .bitrate = 110, .hw_value = 3, .hw_value_short = 3, }, - { .bitrate = 60, .hw_value = 4, .hw_value_short = 4, }, - { .bitrate = 90, .hw_value = 5, .hw_value_short = 5, }, - { .bitrate = 120, .hw_value = 6, .hw_value_short = 6, }, - { .bitrate = 180, .hw_value = 7, .hw_value_short = 7, }, - { .bitrate = 240, .hw_value = 8, .hw_value_short = 8, }, - { .bitrate = 360, .hw_value = 9, .hw_value_short = 9, }, - { .bitrate = 480, .hw_value = 10, .hw_value_short = 10, }, - { .bitrate = 540, .hw_value = 11, .hw_value_short = 11, }, -}; - -/* can't be const, mac80211 writes to this */ -static struct ieee80211_channel stlc45xx_channels[] = { - { .hw_value = 1, .center_freq = 2412}, - { .hw_value = 2, .center_freq = 2417}, - { .hw_value = 3, .center_freq = 2422}, - { .hw_value = 4, .center_freq = 2427}, - { .hw_value = 5, .center_freq = 2432}, - { .hw_value = 6, .center_freq = 2437}, - { .hw_value = 7, .center_freq = 2442}, - { .hw_value = 8, .center_freq = 2447}, - { .hw_value = 9, .center_freq = 2452}, - { .hw_value = 10, .center_freq = 2457}, - { .hw_value = 11, .center_freq = 2462}, - { .hw_value = 12, .center_freq = 2467}, - { .hw_value = 13, .center_freq = 2472}, -}; - -/* can't be const, mac80211 writes to this */ -static struct ieee80211_supported_band stlc45xx_band_2ghz = { - .channels = stlc45xx_channels, - .n_channels = ARRAY_SIZE(stlc45xx_channels), - .bitrates = stlc45xx_rates, - .n_bitrates = ARRAY_SIZE(stlc45xx_rates), -}; - -static const struct ieee80211_ops stlc45xx_ops = { - .start = stlc45xx_op_start, - .stop = stlc45xx_op_stop, - .add_interface = stlc45xx_op_add_interface, - .remove_interface = stlc45xx_op_remove_interface, - .config = stlc45xx_op_config, - .configure_filter = stlc45xx_op_configure_filter, - .tx = stlc45xx_op_tx, - .bss_info_changed = stlc45xx_op_bss_info_changed, -}; - -static int stlc45xx_register_mac80211(struct stlc45xx *stlc) -{ - /* FIXME: SET_IEEE80211_PERM_ADDR() requires default_mac_addr - to be non-const for some strange reason */ - static u8 default_mac_addr[ETH_ALEN] = { - 0x00, 0x02, 0xee, 0xc0, 0xff, 0xee - }; - int ret; - - SET_IEEE80211_PERM_ADDR(stlc->hw, default_mac_addr); - - ret = ieee80211_register_hw(stlc->hw); - if (ret) { - stlc45xx_error("unable to register mac80211 hw: %d", ret); - return ret; - } - - return 0; -} - -static void stlc45xx_device_release(struct device *dev) -{ - -} - -static struct platform_device stlc45xx_device = { - .name = "stlc45xx", - .id = -1, - - /* device model insists to have a release function */ - .dev = { - .release = stlc45xx_device_release, - }, -}; - -static int __devinit stlc45xx_probe(struct spi_device *spi) -{ - struct stlc45xx *stlc; - struct ieee80211_hw *hw; - int ret; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - /* mac80211 alloc */ - hw = ieee80211_alloc_hw(sizeof(*stlc), &stlc45xx_ops); - if (!hw) { - stlc45xx_error("could not alloc ieee80211_hw"); - ret = -ENOMEM; - goto out; - } - - /* mac80211 clears hw->priv */ - stlc = hw->priv; - - stlc->hw = hw; - dev_set_drvdata(&spi->dev, stlc); - stlc->spi = spi; - - spi->bits_per_word = 16; - spi->max_speed_hz = 24000000; - - ret = spi_setup(spi); - if (ret < 0) - stlc45xx_error("spi_setup failed"); - - ret = gpio_request(stlc45xx_gpio_power, "stlc45xx power"); - if (ret < 0) { - stlc45xx_error("power GPIO request failed: %d", ret); - return ret; - } - - ret = gpio_request(stlc45xx_gpio_irq, "stlc45xx irq"); - if (ret < 0) { - stlc45xx_error("irq GPIO request failed: %d", ret); - goto out; - } - - gpio_direction_output(stlc45xx_gpio_power, 0); - gpio_direction_input(stlc45xx_gpio_irq); - - ret = request_irq(gpio_to_irq(stlc45xx_gpio_irq), - stlc45xx_interrupt, IRQF_DISABLED, "stlc45xx", - stlc->spi); - if (ret < 0) - /* FIXME: handle the error */ - stlc45xx_error("request_irq() failed"); - - set_irq_type(gpio_to_irq(stlc45xx_gpio_irq), - IRQ_TYPE_EDGE_RISING); - - disable_irq(gpio_to_irq(stlc45xx_gpio_irq)); - - ret = platform_device_register(&stlc45xx_device); - if (ret) { - stlc45xx_error("Couldn't register wlan_omap device."); - return ret; - } - dev_set_drvdata(&stlc45xx_device.dev, stlc); - - INIT_WORK(&stlc->work, stlc45xx_work); - INIT_WORK(&stlc->work_reset, stlc45xx_work_reset); - INIT_DELAYED_WORK(&stlc->work_tx_timeout, stlc45xx_work_tx_timeout); - mutex_init(&stlc->mutex); - init_completion(&stlc->fw_comp); - spin_lock_init(&stlc->tx_lock); - INIT_LIST_HEAD(&stlc->txbuffer); - INIT_LIST_HEAD(&stlc->tx_pending); - INIT_LIST_HEAD(&stlc->tx_sent); - - hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; - /* four bytes for padding */ - hw->extra_tx_headroom = sizeof(struct s_lm_data_out) + 4; - - /* unit us */ - hw->channel_change_time = 1000; - - hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); - hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &stlc45xx_band_2ghz; - - SET_IEEE80211_DEV(hw, &spi->dev); - - BUILD_BUG_ON(sizeof(default_cal_rssi) != RSSI_CAL_ARRAY_LEN); - BUILD_BUG_ON(sizeof(default_cal_channels) != CHANNEL_CAL_ARRAY_LEN); - - stlc->cal_rssi = kmemdup(default_cal_rssi, RSSI_CAL_ARRAY_LEN, - GFP_KERNEL); - stlc->cal_channels = kmemdup(default_cal_channels, - CHANNEL_CAL_ARRAY_LEN, - GFP_KERNEL); - - ret = device_create_file(&stlc45xx_device.dev, &dev_attr_cal_rssi); - if (ret < 0) { - stlc45xx_error("failed to create sysfs file cal_rssi"); - goto out; - } - - ret = device_create_file(&stlc45xx_device.dev, &dev_attr_cal_channels); - if (ret < 0) { - stlc45xx_error("failed to create sysfs file cal_channels"); - goto out; - } - - ret = device_create_file(&stlc45xx_device.dev, &dev_attr_tx_buf); - if (ret < 0) { - stlc45xx_error("failed to create sysfs file tx_buf"); - goto out; - } - - ret = stlc45xx_register_mac80211(stlc); - if (ret < 0) - goto out; - - stlc45xx_info("v" DRIVER_VERSION " loaded"); - - stlc45xx_info("config buffer 0x%x-0x%x", - FIRMWARE_CONFIG_START, FIRMWARE_CONFIG_END); - stlc45xx_info("tx 0x%x-0x%x, rx 0x%x-0x%x", - FIRMWARE_TXBUFFER_START, FIRMWARE_TXBUFFER_END, - FIRMWARE_RXBUFFER_START, FIRMWARE_RXBUFFER_END); - -out: - return ret; -} - -static int __devexit stlc45xx_remove(struct spi_device *spi) -{ - struct stlc45xx *stlc = dev_get_drvdata(&spi->dev); - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - platform_device_unregister(&stlc45xx_device); - - ieee80211_unregister_hw(stlc->hw); - - free_irq(gpio_to_irq(stlc45xx_gpio_irq), spi); - - gpio_free(stlc45xx_gpio_power); - gpio_free(stlc45xx_gpio_irq); - - /* FIXME: free cal_channels and cal_rssi? */ - - kfree(stlc->fw); - - mutex_destroy(&stlc->mutex); - - /* frees also stlc */ - ieee80211_free_hw(stlc->hw); - stlc = NULL; - - return 0; -} - - -static struct spi_driver stlc45xx_spi_driver = { - .driver = { - /* use cx3110x name because board-n800.c uses that for the - * SPI port */ - .name = "cx3110x", - .bus = &spi_bus_type, - .owner = THIS_MODULE, - }, - - .probe = stlc45xx_probe, - .remove = __devexit_p(stlc45xx_remove), -}; - -static int __init stlc45xx_init(void) -{ - int ret; - - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - ret = spi_register_driver(&stlc45xx_spi_driver); - if (ret < 0) { - stlc45xx_error("failed to register SPI driver: %d", ret); - goto out; - } - -out: - return ret; -} - -static void __exit stlc45xx_exit(void) -{ - stlc45xx_debug(DEBUG_FUNC, "%s", __func__); - - spi_unregister_driver(&stlc45xx_spi_driver); - - stlc45xx_info("unloaded"); -} - -module_init(stlc45xx_init); -module_exit(stlc45xx_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Kalle Valo "); -MODULE_ALIAS("spi:cx3110x"); diff --git a/drivers/staging/stlc45xx/stlc45xx.h b/drivers/staging/stlc45xx/stlc45xx.h deleted file mode 100644 index ac96bbbde79..00000000000 --- a/drivers/staging/stlc45xx/stlc45xx.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * This file is part of stlc45xx - * - * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies). - * - * Contact: Kalle Valo - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -#include -#include -#include - -#include "stlc45xx_lmac.h" - -#define DRIVER_NAME "stlc45xx" -#define DRIVER_VERSION "0.1.3" - -#define DRIVER_PREFIX DRIVER_NAME ": " - -enum { - DEBUG_NONE = 0, - DEBUG_FUNC = 1 << 0, - DEBUG_IRQ = 1 << 1, - DEBUG_BH = 1 << 2, - DEBUG_RX = 1 << 3, - DEBUG_RX_CONTENT = 1 << 5, - DEBUG_TX = 1 << 6, - DEBUG_TX_CONTENT = 1 << 8, - DEBUG_TXBUFFER = 1 << 9, - DEBUG_QUEUE = 1 << 10, - DEBUG_BOOT = 1 << 11, - DEBUG_PSM = 1 << 12, - DEBUG_ALL = ~0, -}; - -#define DEBUG_LEVEL DEBUG_NONE -/* #define DEBUG_LEVEL DEBUG_ALL */ -/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_RX | DEBUG_IRQ) */ -/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_MEMREGION | DEBUG_QUEUE) */ -/* #define DEBUG_LEVEL (DEBUG_MEMREGION | DEBUG_QUEUE) */ - -#define stlc45xx_error(fmt, arg...) \ - printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg) - -#define stlc45xx_warning(fmt, arg...) \ - printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg) - -#define stlc45xx_info(fmt, arg...) \ - printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg) - -#define stlc45xx_debug(level, fmt, arg...) \ - do { \ - if (level & DEBUG_LEVEL) \ - printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \ - } while (0) - -#define stlc45xx_dump(level, buf, len) \ - do { \ - if (level & DEBUG_LEVEL) \ - print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \ - 16, 1, buf, len, 1); \ - } while (0) - -#define MAC2STR(a) ((a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]) -#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x" - -/* Bit 15 is read/write bit; ON = READ, OFF = WRITE */ -#define ADDR_READ_BIT_15 0x8000 - -#define SPI_ADRS_ARM_INTERRUPTS 0x00 -#define SPI_ADRS_ARM_INT_EN 0x04 - -#define SPI_ADRS_HOST_INTERRUPTS 0x08 -#define SPI_ADRS_HOST_INT_EN 0x0c -#define SPI_ADRS_HOST_INT_ACK 0x10 - -#define SPI_ADRS_GEN_PURP_1 0x14 -#define SPI_ADRS_GEN_PURP_2 0x18 - -/* high word */ -#define SPI_ADRS_DEV_CTRL_STAT 0x26 - -#define SPI_ADRS_DMA_DATA 0x28 - -#define SPI_ADRS_DMA_WRITE_CTRL 0x2c -#define SPI_ADRS_DMA_WRITE_LEN 0x2e -#define SPI_ADRS_DMA_WRITE_BASE 0x30 - -#define SPI_ADRS_DMA_READ_CTRL 0x34 -#define SPI_ADRS_DMA_READ_LEN 0x36 -#define SPI_ADRS_DMA_READ_BASE 0x38 - -#define SPI_CTRL_STAT_HOST_OVERRIDE 0x8000 -#define SPI_CTRL_STAT_START_HALTED 0x4000 -#define SPI_CTRL_STAT_RAM_BOOT 0x2000 -#define SPI_CTRL_STAT_HOST_RESET 0x1000 -#define SPI_CTRL_STAT_HOST_CPU_EN 0x0800 - -#define SPI_DMA_WRITE_CTRL_ENABLE 0x0001 -#define SPI_DMA_READ_CTRL_ENABLE 0x0001 -#define HOST_ALLOWED (1 << 7) - -#define FIRMWARE_ADDRESS 0x20000 - -#define SPI_TIMEOUT 100 /* msec */ - -#define SPI_MAX_TX_PACKETS 32 - -#define SPI_MAX_PACKET_SIZE 32767 - -#define SPI_TARGET_INT_WAKEUP 0x00000001 -#define SPI_TARGET_INT_SLEEP 0x00000002 -#define SPI_TARGET_INT_RDDONE 0x00000004 - -#define SPI_TARGET_INT_CTS 0x00004000 -#define SPI_TARGET_INT_DR 0x00008000 - -#define SPI_HOST_INT_READY 0x00000001 -#define SPI_HOST_INT_WR_READY 0x00000002 -#define SPI_HOST_INT_SW_UPDATE 0x00000004 -#define SPI_HOST_INT_UPDATE 0x10000000 - -/* clear to send */ -#define SPI_HOST_INT_CTS 0x00004000 - -/* data ready */ -#define SPI_HOST_INT_DR 0x00008000 - -#define SPI_HOST_INTS_DEFAULT \ - (SPI_HOST_INT_READY | SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE) - -#define TARGET_BOOT_SLEEP 50 - -/* The firmware buffer is divided into three areas: - * - * o config area (for control commands) - * o tx buffer - * o rx buffer - */ -#define FIRMWARE_BUFFER_START 0x20200 -#define FIRMWARE_BUFFER_END 0x27c60 -#define FIRMWARE_BUFFER_LEN (FIRMWARE_BUFFER_END - FIRMWARE_BUFFER_START) -#define FIRMWARE_MTU 3240 -#define FIRMWARE_CONFIG_PAYLOAD_LEN 1024 -#define FIRMWARE_CONFIG_START FIRMWARE_BUFFER_START -#define FIRMWARE_CONFIG_LEN (sizeof(struct s_lm_control) + \ - FIRMWARE_CONFIG_PAYLOAD_LEN) -#define FIRMWARE_CONFIG_END (FIRMWARE_CONFIG_START + FIRMWARE_CONFIG_LEN - 1) -#define FIRMWARE_RXBUFFER_LEN (5 * FIRMWARE_MTU + 1024) -#define FIRMWARE_RXBUFFER_START (FIRMWARE_BUFFER_END - FIRMWARE_RXBUFFER_LEN) -#define FIRMWARE_RXBUFFER_END (FIRMWARE_RXBUFFER_START + \ - FIRMWARE_RXBUFFER_LEN - 1) -#define FIRMWARE_TXBUFFER_START (FIRMWARE_BUFFER_START + FIRMWARE_CONFIG_LEN) -#define FIRMWARE_TXBUFFER_LEN (FIRMWARE_BUFFER_LEN - FIRMWARE_CONFIG_LEN - \ - FIRMWARE_RXBUFFER_LEN) -#define FIRMWARE_TXBUFFER_END (FIRMWARE_TXBUFFER_START + \ - FIRMWARE_TXBUFFER_LEN - 1) - -#define FIRMWARE_TXBUFFER_HEADER 100 -#define FIRMWARE_TXBUFFER_TRAILER 4 - -/* FIXME: come up with a proper value */ -#define MAX_FRAME_LEN 2500 - -/* unit is ms */ -#define TX_FRAME_LIFETIME 2000 -#define TX_TIMEOUT 4000 - -#define SUPPORTED_CHANNELS 13 - -/* FIXME */ -/* #define CHANNEL_CAL_LEN offsetof(struct s_lmo_scan, bratemask) - \ */ -/* offsetof(struct s_lmo_scan, channel) */ -#define CHANNEL_CAL_LEN 292 -#define CHANNEL_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * CHANNEL_CAL_LEN) -/* FIXME */ -/* #define RSSI_CAL_LEN sizeof(struct s_lmo_scan) - \ */ -/* offsetof(struct s_lmo_scan, rssical) */ -#define RSSI_CAL_LEN 8 -#define RSSI_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * RSSI_CAL_LEN) - -struct s_dma_regs { - unsigned short cmd; - unsigned short len; - unsigned long addr; -}; - -struct stlc45xx_ie_tim { - u8 dtim_count; - u8 dtim_period; - u8 bmap_control; - u8 pvbmap[251]; -}; - -struct txbuffer { - /* can be removed when switched to skb queue */ - struct list_head tx_list; - - struct list_head buffer_list; - - int start; - int frame_start; - int end; - - struct sk_buff *skb; - u32 handle; - - bool status_needed; - - int header_len; - - /* unit jiffies */ - unsigned long lifetime; -}; - -enum fw_state { - FW_STATE_OFF, - FW_STATE_BOOTING, - FW_STATE_READY, - FW_STATE_RESET, - FW_STATE_RESETTING, -}; - -struct stlc45xx { - struct ieee80211_hw *hw; - struct spi_device *spi; - struct work_struct work; - struct work_struct work_reset; - struct delayed_work work_tx_timeout; - struct mutex mutex; - struct completion fw_comp; - - - u8 bssid[ETH_ALEN]; - u8 mac_addr[ETH_ALEN]; - int channel; - - u8 *cal_rssi; - u8 *cal_channels; - - enum fw_state fw_state; - - spinlock_t tx_lock; - - /* protected by tx_lock */ - struct list_head txbuffer; - - /* protected by tx_lock */ - struct list_head tx_pending; - - /* protected by tx_lock */ - int tx_queue_stopped; - - /* protected by mutex */ - struct list_head tx_sent; - - int tx_frames; - - u8 *fw; - int fw_len; - - bool psm; - bool associated; - int aid; - bool pspolling; -}; - - diff --git a/drivers/staging/stlc45xx/stlc45xx_lmac.h b/drivers/staging/stlc45xx/stlc45xx_lmac.h deleted file mode 100644 index af5db801347..00000000000 --- a/drivers/staging/stlc45xx/stlc45xx_lmac.h +++ /dev/null @@ -1,434 +0,0 @@ -/************************************************************************ -* This is the LMAC API interface header file for STLC4560. * -* Copyright (C) 2007 Conexant Systems, Inc. * -* This program is free software; you can redistribute it and/or * -* modify it under the terms of the GNU General Public License * -* as published by the Free Software Foundation; either version 2 * -* of the License, or (at your option) any later version. * -* * -* This program is distributed in the hope that it will be useful, * -* but WITHOUT ANY WARRANTY; without even the implied warranty of * -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * -* GNU General Public License for more details. * -* * -* You should have received a copy of the GNU General Public License * -* along with this program. If not, see .* -*************************************************************************/ - -#ifndef __lmac_h__ -#define __lmac_h__ - -#define LM_TOP_VARIANT 0x0506 -#define LM_BOTTOM_VARIANT 0x0506 - -/* - * LMAC - UMAC interface definition: - */ - -#define LM_FLAG_CONTROL 0x8000 -#define LM_FLAG_ALIGN 0x4000 - -#define LM_CTRL_OPSET 0x0001 - -#define LM_OUT_PROMISC 0x0001 -#define LM_OUT_TIMESTAMP 0x0002 -#define LM_OUT_SEQNR 0x0004 -#define LM_OUT_BURST 0x0010 -#define LM_OUT_NOCANCEL 0x0020 -#define LM_OUT_CLEARTIM 0x0040 -#define LM_OUT_HITCHHIKE 0x0080 -#define LM_OUT_COMPRESS 0x0100 -#define LM_OUT_CONCAT 0x0200 -#define LM_OUT_PCS_ACCEPT 0x0400 -#define LM_OUT_WAITEOSP 0x0800 - - -#define LM_ALOFT_SP 0x10 -#define LM_ALOFT_CTS 0x20 -#define LM_ALOFT_RTS 0x40 -#define LM_ALOFT_MASK 0x1f -#define LM_ALOFT_RATE 0x0f - -#define LM_IN_FCS_GOOD 0x0001 -#define LM_IN_MATCH_MAC 0x0002 -#define LM_IN_MCBC 0x0004 -#define LM_IN_BEACON 0x0008 -#define LM_IN_MATCH_BSS 0x0010 -#define LM_IN_BCAST_BSS 0x0020 -#define LM_IN_DATA 0x0040 -#define LM_IN_TRUNCATED 0x0080 - -#define LM_IN_TRANSPARENT 0x0200 - -#define LM_QUEUE_BEACON 0 -#define LM_QUEUE_SCAN 1 -#define LM_QUEUE_MGT 2 -#define LM_QUEUE_MCBC 3 -#define LM_QUEUE_DATA 4 -#define LM_QUEUE_DATA0 4 -#define LM_QUEUE_DATA1 5 -#define LM_QUEUE_DATA2 6 -#define LM_QUEUE_DATA3 7 - -#define LM_SETUP_INFRA 0x0001 -#define LM_SETUP_IBSS 0x0002 -#define LM_SETUP_TRANSPARENT 0x0008 -#define LM_SETUP_PROMISCUOUS 0x0010 -#define LM_SETUP_HIBERNATE 0x0020 -#define LM_SETUP_NOACK 0x0040 -#define LM_SETUP_RX_DISABLED 0x0080 - -#define LM_ANTENNA_0 0 -#define LM_ANTENNA_1 1 -#define LM_ANTENNA_DIVERSITY 2 - -#define LM_TX_FAILED 0x0001 -#define LM_TX_PSM 0x0002 -#define LM_TX_PSM_CANCELLED 0x0004 - -#define LM_SCAN_EXIT 0x0001 -#define LM_SCAN_TRAP 0x0002 -#define LM_SCAN_ACTIVE 0x0004 -#define LM_SCAN_FILTER 0x0008 - -#define LM_PSM 0x0001 -#define LM_PSM_DTIM 0x0002 -#define LM_PSM_MCBC 0x0004 -#define LM_PSM_CHECKSUM 0x0008 -#define LM_PSM_SKIP_MORE_DATA 0x0010 -#define LM_PSM_BEACON_TIMEOUT 0x0020 -#define LM_PSM_HFOSLEEP 0x0040 -#define LM_PSM_AUTOSWITCH_SLEEP 0x0080 -#define LM_PSM_LPIT 0x0100 -#define LM_PSM_BF_UCAST_SKIP 0x0200 -#define LM_PSM_BF_MCAST_SKIP 0x0400 - -/* hfosleep */ -#define LM_PSM_SLEEP_OPTION_MASK (LM_PSM_AUTOSWITCH_SLEEP | LM_PSM_HFOSLEEP) -#define LM_PSM_SLEEP_OPTION_SHIFT 6 -/* hfosleepend */ -#define LM_PSM_BF_OPTION_MASK (LM_PSM_BF_MCAST_SKIP | LM_PSM_BF_UCAST_SKIP) -#define LM_PSM_BF_OPTION_SHIFT 9 - - -#define LM_PRIVACC_WEP 0x01 -#define LM_PRIVACC_TKIP 0x02 -#define LM_PRIVACC_MICHAEL 0x04 -#define LM_PRIVACC_CCX_KP 0x08 -#define LM_PRIVACC_CCX_MIC 0x10 -#define LM_PRIVACC_AES_CCMP 0x20 - -/* size of s_lm_descr in words */ -#define LM_DESCR_SIZE_WORDS 11 - -#ifndef __ASSEMBLER__ - -enum { - LM_MODE_CLIENT = 0, - LM_MODE_AP -}; - -struct s_lm_descr { - uint16_t modes; - uint16_t flags; - uint32_t buffer_start; - uint32_t buffer_end; - uint8_t header; - uint8_t trailer; - uint8_t tx_queues; - uint8_t tx_depth; - uint8_t privacy; - uint8_t rx_keycache; - uint8_t tim_size; - uint8_t pad1; - uint8_t rates[16]; - uint32_t link; - uint16_t mtu; -}; - - -struct s_lm_control { - uint16_t flags; - uint16_t length; - uint32_t handle; - uint16_t oid; - uint16_t pad; - /* uint8_t data[]; */ -}; - -enum { - LM_PRIV_NONE = 0, - LM_PRIV_WEP, - LM_PRIV_TKIP, - LM_PRIV_TKIPMICHAEL, - LM_PRIV_CCX_WEPMIC, - LM_PRIV_CCX_KPMIC, - LM_PRIV_CCX_KP, - LM_PRIV_AES_CCMP -}; - -enum { - LM_DECRYPT_NONE, - LM_DECRYPT_OK, - LM_DECRYPT_NOKEY, - LM_DECRYPT_NOMICHAEL, - LM_DECRYPT_NOCKIPMIC, - LM_DECRYPT_FAIL_WEP, - LM_DECRYPT_FAIL_TKIP, - LM_DECRYPT_FAIL_MICHAEL, - LM_DECRYPT_FAIL_CKIPKP, - LM_DECRYPT_FAIL_CKIPMIC, - LM_DECRYPT_FAIL_AESCCMP -}; - -struct s_lm_data_out { - uint16_t flags; - uint16_t length; - uint32_t handle; - uint16_t aid; - uint8_t rts_retries; - uint8_t retries; - uint8_t aloft[8]; - uint8_t aloft_ctrl; - uint8_t crypt_offset; - uint8_t keytype; - uint8_t keylen; - uint8_t key[16]; - uint8_t queue; - uint8_t backlog; - uint16_t durations[4]; - uint8_t antenna; - uint8_t cts; - int16_t power; - uint8_t pad[2]; - /*uint8_t data[];*/ -}; - -#define LM_RCPI_INVALID (0xff) - -struct s_lm_data_in { - uint16_t flags; - uint16_t length; - uint16_t frequency; - uint8_t antenna; - uint8_t rate; - uint8_t rcpi; - uint8_t sq; - uint8_t decrypt; - uint8_t rssi_raw; - uint32_t clock[2]; - /*uint8_t data[];*/ -}; - -union u_lm_data { - struct s_lm_data_out out; - struct s_lm_data_in in; -}; - -enum { - LM_OID_SETUP = 0, - LM_OID_SCAN = 1, - LM_OID_TRAP = 2, - LM_OID_EDCF = 3, - LM_OID_KEYCACHE = 4, - LM_OID_PSM = 6, - LM_OID_TXCANCEL = 7, - LM_OID_TX = 8, - LM_OID_BURST = 9, - LM_OID_STATS = 10, - LM_OID_LED = 13, - LM_OID_TIMER = 15, - LM_OID_NAV = 20, - LM_OID_PCS = 22, - LM_OID_BT_BALANCER = 28, - LM_OID_GROUP_ADDRESS_TABLE = 30, - LM_OID_ARPTABLE = 31, - LM_OID_BT_OPTIONS = 35 -}; - -enum { - LM_FRONTEND_UNKNOWN = 0, - LM_FRONTEND_DUETTE3, - LM_FRONTEND_DUETTE2, - LM_FRONTEND_FRISBEE, - LM_FRONTEND_CROSSBOW, - LM_FRONTEND_LONGBOW -}; - - -#define INVALID_LPF_BANDWIDTH 0xffff -#define INVALID_OSC_START_DELAY 0xffff - -struct s_lmo_setup { - uint16_t flags; - uint8_t macaddr[6]; - uint8_t bssid[6]; - uint8_t antenna; - uint8_t rx_align; - uint32_t rx_buffer; - uint16_t rx_mtu; - uint16_t frontend; - uint16_t timeout; - uint16_t truncate; - uint32_t bratemask; - uint8_t sbss_offset; - uint8_t mcast_window; - uint8_t rx_rssi_threshold; - uint8_t rx_ed_threshold; - uint32_t ref_clock; - uint16_t lpf_bandwidth; - uint16_t osc_start_delay; -}; - - -struct s_lmo_scan { - uint16_t flags; - uint16_t dwell; - uint8_t channel[292]; - uint32_t bratemask; - uint8_t aloft[8]; - uint8_t rssical[8]; -}; - - -enum { - LM_TRAP_SCAN = 0, - LM_TRAP_TIMER, - LM_TRAP_BEACON_TX, - LM_TRAP_FAA_RADIO_ON, - LM_TRAP_FAA_RADIO_OFF, - LM_TRAP_RADAR, - LM_TRAP_NO_BEACON, - LM_TRAP_TBTT, - LM_TRAP_SCO_ENTER, - LM_TRAP_SCO_EXIT -}; - -struct s_lmo_trap { - uint16_t event; - uint16_t frequency; -}; - -struct s_lmo_timer { - uint32_t interval; -}; - -struct s_lmo_nav { - uint32_t period; -}; - - -struct s_lmo_edcf_queue; - -struct s_lmo_edcf { - uint8_t flags; - uint8_t slottime; - uint8_t sifs; - uint8_t eofpad; - struct s_lmo_edcf_queue { - uint8_t aifs; - uint8_t pad0; - uint16_t cwmin; - uint16_t cwmax; - uint16_t txop; - } queues[8]; - uint8_t mapping[4]; - uint16_t maxburst; - uint16_t round_trip_delay; -}; - -struct s_lmo_keycache { - uint8_t entry; - uint8_t keyid; - uint8_t address[6]; - uint8_t pad[2]; - uint8_t keytype; - uint8_t keylen; - uint8_t key[24]; -}; - - -struct s_lm_interval; - -struct s_lmo_psm { - uint16_t flags; - uint16_t aid; - struct s_lm_interval { - uint16_t interval; - uint16_t periods; - } intervals[4]; - /* uint16_t pad; */ - uint8_t beacon_rcpi_skip_max; - uint8_t rcpi_delta_threshold; - uint8_t nr; - uint8_t exclude[1]; -}; - -#define MC_FILTER_ADDRESS_NUM 4 - -struct s_lmo_group_address_table { - uint16_t filter_enable; - uint16_t num_address; - uint8_t macaddr_list[MC_FILTER_ADDRESS_NUM][6]; -}; - -struct s_lmo_txcancel { - uint32_t address[1]; -}; - - -struct s_lmo_tx { - uint8_t flags; - uint8_t retries; - uint8_t rcpi; - uint8_t sq; - uint16_t seqctrl; - uint8_t antenna; - uint8_t pad; -}; - -struct s_lmo_burst { - uint8_t flags; - uint8_t queue; - uint8_t backlog; - uint8_t pad; - uint16_t durations[32]; -}; - -struct s_lmo_stats { - uint32_t valid; - uint32_t fcs; - uint32_t abort; - uint32_t phyabort; - uint32_t rts_success; - uint32_t rts_fail; - uint32_t timestamp; - uint32_t time_tx; - uint32_t noisefloor; - uint32_t sample_noise[8]; - uint32_t sample_cca; - uint32_t sample_tx; -}; - - -struct s_lmo_led { - uint16_t flags; - uint16_t mask[2]; - uint16_t delay/*[2]*/; -}; - - -struct s_lmo_bt_balancer { - uint16_t prio_thresh; - uint16_t acl_thresh; -}; - - -struct s_lmo_arp_table { - uint16_t filter_enable; - uint32_t ipaddr; -}; - -#endif /* __ASSEMBLER__ */ - -#endif /* __lmac_h__ */ -- GitLab From 2cdf99ce2b9418c9d7c5f907195cfac421375520 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 26 Oct 2009 16:03:51 -0700 Subject: [PATCH 0401/1165] Staging: android: mark subsystem as broken It's causing lots of build errors, so just mark it as broken. It is scheduled to be removed in 2.6.33 anyway. Signed-off-by: Greg Kroah-Hartman --- drivers/staging/android/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/android/Kconfig b/drivers/staging/android/Kconfig index 24719499237..eb675635ae6 100644 --- a/drivers/staging/android/Kconfig +++ b/drivers/staging/android/Kconfig @@ -2,6 +2,7 @@ menu "Android" config ANDROID bool "Android Drivers" + depends on BROKEN default N ---help--- Enable support for various drivers needed on the Android platform -- GitLab From 049e62614abe79877d210e0661b141578e8df4cd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 27 Oct 2009 15:46:18 -0700 Subject: [PATCH 0402/1165] Staging: wireless drivers Kconfig change Change the wireless drivers to depend on CONFIG_WLAN instead of CONFIG_WLAN_80211 which is going away soon. Cc: John W. Linville Signed-off-by: Greg Kroah-Hartman --- drivers/staging/otus/Kconfig | 2 +- drivers/staging/rt2860/Kconfig | 2 +- drivers/staging/rt2870/Kconfig | 2 +- drivers/staging/rt3090/Kconfig | 2 +- drivers/staging/winbond/Kconfig | 2 +- drivers/staging/wlan-ng/Kconfig | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/staging/otus/Kconfig b/drivers/staging/otus/Kconfig index d549d08fd49..f6cc2625e34 100644 --- a/drivers/staging/otus/Kconfig +++ b/drivers/staging/otus/Kconfig @@ -1,6 +1,6 @@ config OTUS tristate "Atheros OTUS 802.11n USB wireless support" - depends on USB && WLAN_80211 && MAC80211 + depends on USB && WLAN && MAC80211 default N ---help--- Enable support for Atheros 802.11n USB hardware: diff --git a/drivers/staging/rt2860/Kconfig b/drivers/staging/rt2860/Kconfig index 7f44e5e7246..efe38e25c5e 100644 --- a/drivers/staging/rt2860/Kconfig +++ b/drivers/staging/rt2860/Kconfig @@ -1,5 +1,5 @@ config RT2860 tristate "Ralink 2860 wireless support" - depends on PCI && X86 && WLAN_80211 + depends on PCI && X86 && WLAN ---help--- This is an experimental driver for the Ralink 2860 wireless chip. diff --git a/drivers/staging/rt2870/Kconfig b/drivers/staging/rt2870/Kconfig index 76841f6dea9..aea5c822181 100644 --- a/drivers/staging/rt2870/Kconfig +++ b/drivers/staging/rt2870/Kconfig @@ -1,5 +1,5 @@ config RT2870 tristate "Ralink 2870/3070 wireless support" - depends on USB && X86 && WLAN_80211 + depends on USB && X86 && WLAN ---help--- This is an experimental driver for the Ralink xx70 wireless chips. diff --git a/drivers/staging/rt3090/Kconfig b/drivers/staging/rt3090/Kconfig index 255e8eaa483..2b3f745d72b 100644 --- a/drivers/staging/rt3090/Kconfig +++ b/drivers/staging/rt3090/Kconfig @@ -1,5 +1,5 @@ config RT3090 tristate "Ralink 3090 wireless support" - depends on PCI && X86 && WLAN_80211 + depends on PCI && X86 && WLAN ---help--- This is an experimental driver for the Ralink 3090 wireless chip. diff --git a/drivers/staging/winbond/Kconfig b/drivers/staging/winbond/Kconfig index 940460c39f3..132671d96d0 100644 --- a/drivers/staging/winbond/Kconfig +++ b/drivers/staging/winbond/Kconfig @@ -1,6 +1,6 @@ config W35UND tristate "IS89C35 WLAN USB driver" - depends on MAC80211 && WLAN_80211 && USB && EXPERIMENTAL + depends on MAC80211 && WLAN && USB && EXPERIMENTAL default n ---help--- This is highly experimental driver for Winbond WIFI card. diff --git a/drivers/staging/wlan-ng/Kconfig b/drivers/staging/wlan-ng/Kconfig index 9959b658c8c..f44294b0d8d 100644 --- a/drivers/staging/wlan-ng/Kconfig +++ b/drivers/staging/wlan-ng/Kconfig @@ -1,6 +1,6 @@ config PRISM2_USB tristate "Prism2.5/3 USB driver" - depends on WLAN_80211 && USB && WIRELESS_EXT + depends on WLAN && USB && WIRELESS_EXT default n ---help--- This is the wlan-ng prism 2.5/3 USB driver for a wide range of -- GitLab From b881c6cbb313dc3618075e81cd618e6ef7a3d159 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 29 Oct 2009 09:52:02 -0700 Subject: [PATCH 0403/1165] Staging: fix wireless drivers depends These drivers can (erroneously) be enabled even when CONFIG_NET=n, CONFIG_NETDEVICES=n, CONFIG_WLAN=n, etc. Stop this. Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/Kconfig | 2 +- drivers/staging/rtl8192e/Kconfig | 2 +- drivers/staging/rtl8192su/Kconfig | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig index 236e4272544..203c79b8180 100644 --- a/drivers/staging/rtl8187se/Kconfig +++ b/drivers/staging/rtl8187se/Kconfig @@ -1,6 +1,6 @@ config RTL8187SE tristate "RealTek RTL8187SE Wireless LAN NIC driver" - depends on PCI + depends on PCI && WLAN depends on WIRELESS_EXT default N ---help--- diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig index 3100aa58c94..37e4fde4507 100644 --- a/drivers/staging/rtl8192e/Kconfig +++ b/drivers/staging/rtl8192e/Kconfig @@ -1,6 +1,6 @@ config RTL8192E tristate "RealTek RTL8192E Wireless LAN NIC driver" - depends on PCI + depends on PCI && WLAN depends on WIRELESS_EXT default N ---help--- diff --git a/drivers/staging/rtl8192su/Kconfig b/drivers/staging/rtl8192su/Kconfig index 770f41280f2..b8c95f94206 100644 --- a/drivers/staging/rtl8192su/Kconfig +++ b/drivers/staging/rtl8192su/Kconfig @@ -1,6 +1,6 @@ config RTL8192SU tristate "RealTek RTL8192SU Wireless LAN NIC driver" - depends on PCI + depends on PCI && WLAN depends on WIRELESS_EXT default N ---help--- -- GitLab From 40ac7b62d8c132c73a709bd83858b3419f38ec23 Mon Sep 17 00:00:00 2001 From: George Nassar Date: Wed, 14 Oct 2009 18:27:41 -0500 Subject: [PATCH 0404/1165] USB: rndis_host: debug info clobbered before it is logged The MTU throttle-down if a RNDIS device doesn't support a particular packet size is being incorrectly logged. The attempted packet size is being clobbered before it gets logged. First patch; please inform if I'm doing this incorrectly. Diff'd against latest official source as per the FAQ; forward port to current git version is straightforward. Signed-off-by: George Nassar Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/rndis_host.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 0caa8008c51..f56dec6119c 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -362,12 +362,12 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags) retval = -EINVAL; goto halt_fail_and_release; } - dev->hard_mtu = tmp; - net->mtu = dev->hard_mtu - net->hard_header_len; dev_warn(&intf->dev, "dev can't take %u byte packets (max %u), " "adjusting MTU to %u\n", - dev->hard_mtu, tmp, net->mtu); + dev->hard_mtu, tmp, tmp - net->hard_header_len); + dev->hard_mtu = tmp; + net->mtu = dev->hard_mtu - net->hard_header_len; } /* REVISIT: peripheral "alignment" request is ignored ... */ -- GitLab From 3c77d5137d3f4ff41721e9b4f4812db56a6065c0 Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Fri, 16 Oct 2009 12:04:54 -0700 Subject: [PATCH 0405/1165] USB: serial: sierra driver send_setup() autopm fix This patch presents a fix for the autosuspend feature implementation in sierra usb serial driver for function sierra_send_setup(). Because it is possible to call sierra_send_setup() before sierra_open() or after sierra_close() we added a get/put interface activity to assure that the usb control can happen even when the device is autosuspended. Signed-off-by: Elina Pasheva Tested-by: Matthew Safar Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 24 ++++++++++++++---------- 1 file changed, 14 insertions(+), 10 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 45883988a00..3ec79dfc41f 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -296,7 +296,6 @@ struct sierra_port_private { int dsr_state; int dcd_state; int ri_state; - unsigned int opened:1; }; @@ -306,6 +305,8 @@ static int sierra_send_setup(struct usb_serial_port *port) struct sierra_port_private *portdata; __u16 interface = 0; int val = 0; + int do_send = 0; + int retval; dev_dbg(&port->dev, "%s\n", __func__); @@ -324,10 +325,7 @@ static int sierra_send_setup(struct usb_serial_port *port) */ if (port->interrupt_in_urb) { /* send control message */ - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); + do_send = 1; } } @@ -339,12 +337,18 @@ static int sierra_send_setup(struct usb_serial_port *port) interface = 1; else if (port->bulk_out_endpointAddress == 5) interface = 2; - return usb_control_msg(serial->dev, - usb_rcvctrlpipe(serial->dev, 0), - 0x22, 0x21, val, interface, - NULL, 0, USB_CTRL_SET_TIMEOUT); + + do_send = 1; } - return 0; + if (!do_send) + return 0; + + usb_autopm_get_interface(serial->interface); + retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); + usb_autopm_put_interface(serial->interface); + + return retval; } static void sierra_set_termios(struct tty_struct *tty, -- GitLab From b64dc0a597fd3c66d888df0886635eba210cc19f Mon Sep 17 00:00:00 2001 From: Elina Pasheva Date: Tue, 27 Oct 2009 13:49:59 -0700 Subject: [PATCH 0406/1165] USB: serial: sierra driver autopm fixes This patch presents fixes for the autosuspend feature implementation in sierra usb serial driver in functions sierra_open(), sierra_close() and stop_read_write_urbs(). The patch "sierra_close() must resume the device before it notifies it of a closure" submitted by Oliver Neukum on Wed, October 14 has been merged as fix in sierra_close() function. The bug fix in sierra_open() function restores the autopm interface state on error condition. The bug fix in in stop_read_write_urbs() function assures that both receive and interrupt urbs are recycled. Signed-off-by: Elina Pasheva Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 3ec79dfc41f..5019325ba25 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -777,8 +777,11 @@ static void sierra_close(struct usb_serial_port *port) if (serial->dev) { mutex_lock(&serial->disc_mutex); - if (!serial->disconnected) + if (!serial->disconnected) { + serial->interface->needs_remote_wakeup = 0; + usb_autopm_get_interface(serial->interface); sierra_send_setup(port); + } mutex_unlock(&serial->disc_mutex); spin_lock_irq(&intfdata->susp_lock); portdata->opened = 0; @@ -792,8 +795,6 @@ static void sierra_close(struct usb_serial_port *port) sierra_release_urb(portdata->in_urbs[i]); portdata->in_urbs[i] = NULL; } - usb_autopm_get_interface(serial->interface); - serial->interface->needs_remote_wakeup = 0; } } @@ -831,6 +832,8 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) if (err) { /* get rid of everything as in close */ sierra_close(port); + /* restore balance for autopm */ + usb_autopm_put_interface(serial->interface); return err; } sierra_send_setup(port); @@ -919,7 +922,7 @@ static void sierra_release(struct usb_serial *serial) #ifdef CONFIG_PM static void stop_read_write_urbs(struct usb_serial *serial) { - int i, j; + int i; struct usb_serial_port *port; struct sierra_port_private *portdata; @@ -927,8 +930,7 @@ static void stop_read_write_urbs(struct usb_serial *serial) for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; portdata = usb_get_serial_port_data(port); - for (j = 0; j < N_IN_URB; j++) - usb_kill_urb(portdata->in_urbs[j]); + sierra_stop_rx_urbs(port); usb_kill_anchored_urbs(&portdata->active); } } -- GitLab From 1e6159f858f5da608612ae10d6554bb7ecac9755 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Wed, 21 Oct 2009 20:33:39 +0900 Subject: [PATCH 0407/1165] USB: r8a66597-hcd: fix cannot detect a device when uses_new_polling is set Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/r8a66597-hcd.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 749b5374282..e33d3625635 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1003,19 +1003,20 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port, if (syssts == SE0) { r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port)); r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port)); - return; - } + } else { + if (syssts == FS_JSTS) + r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port)); + else if (syssts == LS_JSTS) + r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port)); - if (syssts == FS_JSTS) - r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port)); - else if (syssts == LS_JSTS) - r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port)); + r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port)); + r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port)); - r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port)); - r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port)); + if (r8a66597->bus_suspended) + usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); + } - if (r8a66597->bus_suspended) - usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); + usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597)); } /* this function must be called with interrupt disabled */ @@ -1024,6 +1025,8 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port) u16 speed = get_rh_usb_speed(r8a66597, port); struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; + rh->port &= ~((1 << USB_PORT_FEAT_HIGHSPEED) | + (1 << USB_PORT_FEAT_LOWSPEED)); if (speed == HSMODE) rh->port |= (1 << USB_PORT_FEAT_HIGHSPEED); else if (speed == LSMODE) -- GitLab From fead2ab6cf9ad3a84a06e68ccc20d1e460fad13e Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 22 Oct 2009 15:00:36 +0800 Subject: [PATCH 0408/1165] USB: option: TLAYTECH TUE800 support Add ID for Tlaytech TUE800 CDMA modem to the option driver. Signed-off-by: Bryan Wu Acked-By: Matthias Urlichs Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 65d96b214f9..cd44c68954d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -315,6 +315,9 @@ static int option_resume(struct usb_serial *serial); #define QISDA_PRODUCT_H20_4515 0x4515 #define QISDA_PRODUCT_H20_4519 0x4519 +/* TLAYTECH PRODUCTS */ +#define TLAYTECH_VENDOR_ID 0x20B9 +#define TLAYTECH_PRODUCT_TEU800 0x1682 /* TOSHIBA PRODUCTS */ #define TOSHIBA_VENDOR_ID 0x0930 @@ -593,6 +596,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, + { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- GitLab From 37c4fd8c7551c7419a5faf87a76ff6949c5adaf3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 29 Oct 2009 19:50:43 +0300 Subject: [PATCH 0409/1165] USB: fsl_udc_core: Fix kernel oops on module removal fsl_udc_release() calls dma_free_coherent() with an inappropriate device passed to it, and since the device has no dma_ops, the following oops pops up: Kernel BUG at d103ce9c [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [d103ce9c] fsl_udc_release+0x50/0x80 [fsl_usb2_udc] LR [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] Call Trace: [cfbc7dc0] [d103ce74] fsl_udc_release+0x28/0x80 [fsl_usb2_udc] [cfbc7dd0] [c01a35c4] device_release+0x2c/0x90 [cfbc7de0] [c016b480] kobject_cleanup+0x58/0x98 [cfbc7e00] [c016c52c] kref_put+0x54/0x6c [cfbc7e10] [c016b360] kobject_put+0x34/0x64 [cfbc7e20] [c01a1d0c] put_device+0x1c/0x2c [cfbc7e30] [d103dbfc] fsl_udc_remove+0xc0/0x1e4 [fsl_usb2_udc] ... This patch fixes the issue by passing dev->parent, which points to a correct device. Signed-off-by: Anton Vorontsov Cc: Li Yang Cc: David Brownell Cc: Guennadi Liakhovetski Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_udc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 42a74b8a0bb..fa3d142ba64 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -2139,7 +2139,7 @@ static int fsl_proc_read(char *page, char **start, off_t off, int count, static void fsl_udc_release(struct device *dev) { complete(udc_controller->done); - dma_free_coherent(dev, udc_controller->ep_qh_size, + dma_free_coherent(dev->parent, udc_controller->ep_qh_size, udc_controller->ep_qh, udc_controller->ep_qh_dma); kfree(udc_controller); } -- GitLab From 39acbc12affcaa23ef1d887ba3d197baca8e6e47 Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Sun, 18 Oct 2009 00:31:38 +0400 Subject: [PATCH 0410/1165] Driver core: fix driver_register() return value In this patch: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=16dc42e018c2868211b4928f20a957c0c216126c the check was added for another driver to already claim the same device on the same bus. But the returned error code was wrong: to modprobe, the -EEXIST means that _this_ driver is already installed. It therefore doesn't produce the needed error message when _another_ driver is trying to register for the same device. Returning -EBUSY fixes the problem. Signed-off-by: Stas Sergeev Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/base/driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/driver.c b/drivers/base/driver.c index ed2ebd3c287..f367885a764 100644 --- a/drivers/base/driver.c +++ b/drivers/base/driver.c @@ -236,7 +236,7 @@ int driver_register(struct device_driver *drv) put_driver(other); printk(KERN_ERR "Error: Driver '%s' is already registered, " "aborting...\n", drv->name); - return -EEXIST; + return -EBUSY; } ret = bus_add_driver(drv); -- GitLab From 1a6f2a7512021ceae3c4201c7aab07f032e9ce91 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 12 Oct 2009 20:17:41 -0700 Subject: [PATCH 0411/1165] Driver core: allow certain drivers prohibit bind/unbind via sysfs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Platform drivers registered via platform_driver_probe() can be bound to devices only once, upon registration, because discard their probe() routines to save memory. Unbinding the driver through sysfs 'unbind' leaves the device stranded and confuses users so let's not create bind and unbind attributes for such drivers. Signed-off-by: Dmitry Torokhov Cc: Éric Piel Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 17 +++++++++++------ drivers/base/platform.c | 6 +++++- include/linux/device.h | 4 +++- 3 files changed, 19 insertions(+), 8 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 973bf2ad4e0..63c143e54a5 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -689,15 +689,19 @@ int bus_add_driver(struct device_driver *drv) printk(KERN_ERR "%s: driver_add_attrs(%s) failed\n", __func__, drv->name); } - error = add_bind_files(drv); - if (error) { - /* Ditto */ - printk(KERN_ERR "%s: add_bind_files(%s) failed\n", - __func__, drv->name); + + if (!drv->suppress_bind_attrs) { + error = add_bind_files(drv); + if (error) { + /* Ditto */ + printk(KERN_ERR "%s: add_bind_files(%s) failed\n", + __func__, drv->name); + } } kobject_uevent(&priv->kobj, KOBJ_ADD); return 0; + out_unregister: kfree(drv->p); drv->p = NULL; @@ -720,7 +724,8 @@ void bus_remove_driver(struct device_driver *drv) if (!drv->bus) return; - remove_bind_files(drv); + if (!drv->suppress_bind_attrs) + remove_bind_files(drv); driver_remove_attrs(drv->bus, drv); driver_remove_file(drv, &driver_attr_uevent); klist_remove(&drv->p->knode_bus); diff --git a/drivers/base/platform.c b/drivers/base/platform.c index ed156a13aa4..4fa954b07ac 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -521,11 +521,15 @@ int __init_or_module platform_driver_probe(struct platform_driver *drv, { int retval, code; + /* make sure driver won't have bind/unbind attributes */ + drv->driver.suppress_bind_attrs = true; + /* temporary section violation during probe() */ drv->probe = probe; retval = code = platform_driver_register(drv); - /* Fixup that section violation, being paranoid about code scanning + /* + * Fixup that section violation, being paranoid about code scanning * the list of drivers in order to probe new devices. Check to see * if the probe was successful, and make sure any forced probes of * new devices fail. diff --git a/include/linux/device.h b/include/linux/device.h index aca31bf7d8e..2ea3e492181 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -124,7 +124,9 @@ struct device_driver { struct bus_type *bus; struct module *owner; - const char *mod_name; /* used for built-in modules */ + const char *mod_name; /* used for built-in modules */ + + bool suppress_bind_attrs; /* disables bind/unbind via sysfs */ int (*probe) (struct device *dev); int (*remove) (struct device *dev); -- GitLab From 468727ab1273a0f95562befa611a3ce39778599c Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:15 -0600 Subject: [PATCH 0412/1165] Documentation: ABI: rename sysfs-devices-cache_disable properly Rename sysfs-devices-cache_disable to sysfs-devices-system-cpu, in order to keep a stricter correlation between a sysfs directory and its documentation. Reported-by: David Rientjes Signed-off-by: Alex Chiang Acked-by: David Rientjes Signed-off-by: Greg Kroah-Hartman --- .../{sysfs-devices-cache_disable => sysfs-devices-system-cpu} | 0 1 file changed, 0 insertions(+), 0 deletions(-) rename Documentation/ABI/testing/{sysfs-devices-cache_disable => sysfs-devices-system-cpu} (100%) diff --git a/Documentation/ABI/testing/sysfs-devices-cache_disable b/Documentation/ABI/testing/sysfs-devices-system-cpu similarity index 100% rename from Documentation/ABI/testing/sysfs-devices-cache_disable rename to Documentation/ABI/testing/sysfs-devices-system-cpu -- GitLab From 2ceb3fb0a78c671892b01319ac8e3baede33a78c Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:20 -0600 Subject: [PATCH 0413/1165] Documentation: ABI: document /sys/devices/system/cpu/ This interface has been around for a long time, but hasn't been officially documented. Document the top level sysfs directory for CPU attributes. Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman --- Documentation/ABI/testing/sysfs-devices-system-cpu | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 175bb4f7051..86126b187ae 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -1,3 +1,15 @@ +What: /sys/devices/system/cpu/ +Date: pre-git history +Contact: Linux kernel mailing list +Description: + A collection of both global and individual CPU attributes + + Individual CPU attributes are contained in subdirectories + named by the kernel's logical CPU number, e.g.: + + /sys/devices/system/cpu/cpu#/ + + What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X Date: August 2008 KernelVersion: 2.6.27 -- GitLab From d93fc863d2d2cea1057996c39cef368f41741448 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:25 -0600 Subject: [PATCH 0414/1165] Documentation: ABI: /sys/devices/system/cpu/ topology files Add brief descriptions for the following sysfs files: /sys/devices/system/cpu/kernel_max /sys/devices/system/cpu/offline /sys/devices/system/cpu/online /sys/devices/system/cpu/possible /sys/devices/system/cpu/present Excerpted the relevant information from Documentation/cputopology.txt and pointed back to cputopology.txt as the authoritative source of information. Cc: Mike Travis Cc: Rusty Russell Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman --- .../ABI/testing/sysfs-devices-system-cpu | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 86126b187ae..871acdbeed1 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -10,6 +10,34 @@ Description: /sys/devices/system/cpu/cpu#/ +What: /sys/devices/system/cpu/kernel_max + /sys/devices/system/cpu/offline + /sys/devices/system/cpu/online + /sys/devices/system/cpu/possible + /sys/devices/system/cpu/present +Date: December 2008 +Contact: Linux kernel mailing list +Description: CPU topology files that describe kernel limits related to + hotplug. Briefly: + + kernel_max: the maximum cpu index allowed by the kernel + configuration. + + offline: cpus that are not online because they have been + HOTPLUGGED off or exceed the limit of cpus allowed by the + kernel configuration (kernel_max above). + + online: cpus that are online and being scheduled. + + possible: cpus that have been allocated resources and can be + brought online if they are present. + + present: cpus that have been identified as being present in + the system. + + See Documentation/cputopology.txt for more information. + + What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X Date: August 2008 KernelVersion: 2.6.27 -- GitLab From 663fb2fc733006f685400fb44551303b72b61a88 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:31 -0600 Subject: [PATCH 0415/1165] Documentation: ABI: /sys/devices/system/cpu/cpu#/ topology files Add brief descriptions for the following sysfs files: /sys/devices/system/cpu/cpu#/topology/core_id /sys/devices/system/cpu/cpu#/topology/core_siblings /sys/devices/system/cpu/cpu#/topology/core_siblings_list /sys/devices/system/cpu/cpu#/topology/physical_package_id /sys/devices/system/cpu/cpu#/topology/thread_siblings /sys/devices/system/cpu/cpu#/topology/thread_siblings_list The descriptions in Documentation/cputopology.txt weren't very informative, so I attempted a better description based on code reading and hopeful guessing. Updated Documentation/cputopology.txt with the better descriptions and fixed some style issues. Cc: Mike Travis Cc: Rusty Russell Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman --- .../ABI/testing/sysfs-devices-system-cpu | 39 +++++++++++++++ Documentation/cputopology.txt | 47 ++++++++++++------- 2 files changed, 69 insertions(+), 17 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 871acdbeed1..2ade5c0809a 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -38,6 +38,45 @@ Description: CPU topology files that describe kernel limits related to See Documentation/cputopology.txt for more information. +What: /sys/devices/system/cpu/cpu#/topology/core_id + /sys/devices/system/cpu/cpu#/topology/core_siblings + /sys/devices/system/cpu/cpu#/topology/core_siblings_list + /sys/devices/system/cpu/cpu#/topology/physical_package_id + /sys/devices/system/cpu/cpu#/topology/thread_siblings + /sys/devices/system/cpu/cpu#/topology/thread_siblings_list +Date: December 2008 +Contact: Linux kernel mailing list +Description: CPU topology files that describe a logical CPU's relationship + to other cores and threads in the same physical package. + + One cpu# directory is created per logical CPU in the system, + e.g. /sys/devices/system/cpu/cpu42/. + + Briefly, the files above are: + + core_id: the CPU core ID of cpu#. Typically it is the + hardware platform's identifier (rather than the kernel's). + The actual value is architecture and platform dependent. + + core_siblings: internal kernel map of cpu#'s hardware threads + within the same physical_package_id. + + core_siblings_list: human-readable list of the logical CPU + numbers within the same physical_package_id as cpu#. + + physical_package_id: physical package id of cpu#. Typically + corresponds to a physical socket number, but the actual value + is architecture and platform dependent. + + thread_siblings: internel kernel map of cpu#'s hardware + threads within the same core as cpu# + + thread_siblings_list: human-readable list of cpu#'s hardware + threads within the same core as cpu# + + See Documentation/cputopology.txt for more information. + + What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X Date: August 2008 KernelVersion: 2.6.27 diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index b41f3e58aef..f1c5c4bccd3 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -1,15 +1,28 @@ -Export cpu topology info via sysfs. Items (attributes) are similar +Export CPU topology info via sysfs. Items (attributes) are similar to /proc/cpuinfo. 1) /sys/devices/system/cpu/cpuX/topology/physical_package_id: -represent the physical package id of cpu X; + + physical package id of cpuX. Typically corresponds to a physical + socket number, but the actual value is architecture and platform + dependent. + 2) /sys/devices/system/cpu/cpuX/topology/core_id: -represent the cpu core id to cpu X; + + the CPU core ID of cpuX. Typically it is the hardware platform's + identifier (rather than the kernel's). The actual value is + architecture and platform dependent. + 3) /sys/devices/system/cpu/cpuX/topology/thread_siblings: -represent the thread siblings to cpu X in the same core; + + internel kernel map of cpuX's hardware threads within the same + core as cpuX + 4) /sys/devices/system/cpu/cpuX/topology/core_siblings: -represent the thread siblings to cpu X in the same physical package; + + internal kernel map of cpuX's hardware threads within the same + physical_package_id. To implement it in an architecture-neutral way, a new source file, drivers/base/topology.c, is to export the 4 attributes. @@ -32,32 +45,32 @@ not defined by include/asm-XXX/topology.h: 3) thread_siblings: just the given CPU 4) core_siblings: just the given CPU -Additionally, cpu topology information is provided under +Additionally, CPU topology information is provided under /sys/devices/system/cpu and includes these files. The internal source for the output is in brackets ("[]"). - kernel_max: the maximum cpu index allowed by the kernel configuration. + kernel_max: the maximum CPU index allowed by the kernel configuration. [NR_CPUS-1] - offline: cpus that are not online because they have been + offline: CPUs that are not online because they have been HOTPLUGGED off (see cpu-hotplug.txt) or exceed the limit - of cpus allowed by the kernel configuration (kernel_max + of CPUs allowed by the kernel configuration (kernel_max above). [~cpu_online_mask + cpus >= NR_CPUS] - online: cpus that are online and being scheduled [cpu_online_mask] + online: CPUs that are online and being scheduled [cpu_online_mask] - possible: cpus that have been allocated resources and can be + possible: CPUs that have been allocated resources and can be brought online if they are present. [cpu_possible_mask] - present: cpus that have been identified as being present in the + present: CPUs that have been identified as being present in the system. [cpu_present_mask] The format for the above output is compatible with cpulist_parse() [see ]. Some examples follow. -In this example, there are 64 cpus in the system but cpus 32-63 exceed +In this example, there are 64 CPUs in the system but cpus 32-63 exceed the kernel max which is limited to 0..31 by the NR_CPUS config option -being 32. Note also that cpus 2 and 4-31 are not online but could be +being 32. Note also that CPUs 2 and 4-31 are not online but could be brought online as they are both present and possible. kernel_max: 31 @@ -67,8 +80,8 @@ brought online as they are both present and possible. present: 0-31 In this example, the NR_CPUS config option is 128, but the kernel was -started with possible_cpus=144. There are 4 cpus in the system and cpu2 -was manually taken offline (and is the only cpu that can be brought +started with possible_cpus=144. There are 4 CPUs in the system and cpu2 +was manually taken offline (and is the only CPU that can be brought online.) kernel_max: 127 @@ -78,4 +91,4 @@ online.) present: 0-3 See cpu-hotplug.txt for the possible_cpus=NUM kernel start parameter -as well as more information on the various cpumask's. +as well as more information on the various cpumasks. -- GitLab From e6dcfa7c61c4d31797a12d738bfe0bdec0ca2be1 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:36 -0600 Subject: [PATCH 0416/1165] Documentation: ABI: /sys/devices/system/cpu/sched_[mc|smt]_power_savings Document sched_[mc|smt]_power_savings by reading existing code and git logs. Cc: Suresh Siddha Cc: Ingo Molnar Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman --- .../ABI/testing/sysfs-devices-system-cpu | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 2ade5c0809a..8cdda1c5698 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -9,6 +9,30 @@ Description: /sys/devices/system/cpu/cpu#/ +What: /sys/devices/system/cpu/sched_mc_power_savings + /sys/devices/system/cpu/sched_smt_power_savings +Date: June 2006 +Contact: Linux kernel mailing list +Description: Discover and adjust the kernel's multi-core scheduler support. + + Possible values are: + + 0 - No power saving load balance (default value) + 1 - Fill one thread/core/package first for long running threads + 2 - Also bias task wakeups to semi-idle cpu package for power + savings + + sched_mc_power_savings is dependent upon SCHED_MC, which is + itself architecture dependent. + + sched_smt_power_savings is dependent upon SCHED_SMT, which + is itself architecture dependent. + + The two files are independent of each other. It is possible + that one file may be present without the other. + + Introduced by git commit 5c45bf27. + What: /sys/devices/system/cpu/kernel_max /sys/devices/system/cpu/offline -- GitLab From c1fb5c475126b77b47ba762f5b48535cd0420d24 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 21:45:41 -0600 Subject: [PATCH 0417/1165] Documentation: ABI: /sys/devices/system/cpu/cpuidle/ Document cpuidle sysfs attributes by reading code, Documentation/cpuidle/, and git logs. Cc: Venki Pallipadi Cc: Len Brown Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman --- .../ABI/testing/sysfs-devices-system-cpu | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 8cdda1c5698..968d8bad383 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -101,6 +101,26 @@ Description: CPU topology files that describe a logical CPU's relationship See Documentation/cputopology.txt for more information. +What: /sys/devices/system/cpu/cpuidle/current_driver + /sys/devices/system/cpu/cpuidle/current_governer_ro +Date: September 2007 +Contact: Linux kernel mailing list +Description: Discover cpuidle policy and mechanism + + Various CPUs today support multiple idle levels that are + differentiated by varying exit latencies and power + consumption during idle. + + Idle policy (governor) is differentiated from idle mechanism + (driver) + + current_driver: displays current idle mechanism + + current_governor_ro: displays current idle policy + + See files in Documentation/cpuidle/ for more information. + + What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X Date: August 2008 KernelVersion: 2.6.27 -- GitLab From 657348a056eea4a27be20cf8e22c98a252597447 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 21 Oct 2009 22:15:30 -0600 Subject: [PATCH 0418/1165] Documentation: ABI: /sys/devices/system/cpu/cpu#/node Describe NUMA node symlink created for CPUs when CONFIG_NUMA is set. Cc: Randy Dunlap Signed-off-by: Alex Chiang Signed-off-by: Greg Kroah-Hartman --- .../ABI/testing/sysfs-devices-system-cpu | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 968d8bad383..a703b9e9aeb 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -62,6 +62,21 @@ Description: CPU topology files that describe kernel limits related to See Documentation/cputopology.txt for more information. + +What: /sys/devices/system/cpu/cpu#/node +Date: October 2009 +Contact: Linux memory management mailing list +Description: Discover NUMA node a CPU belongs to + + When CONFIG_NUMA is enabled, a symbolic link that points + to the corresponding NUMA node directory. + + For example, the following symlink is created for cpu42 + in NUMA node 2: + + /sys/devices/system/cpu/cpu42/node2 -> ../../node/node2 + + What: /sys/devices/system/cpu/cpu#/topology/core_id /sys/devices/system/cpu/cpu#/topology/core_siblings /sys/devices/system/cpu/cpu#/topology/core_siblings_list -- GitLab From 89a8640279f8bb78aaf778d1fc5c4a6778f18064 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 30 Oct 2009 13:13:26 +0000 Subject: [PATCH 0419/1165] NOMMU: Don't pass NULL pointers to fput() in do_mmap_pgoff() Don't pass NULL pointers to fput() in the error handling paths of the NOMMU do_mmap_pgoff() as it can't handle it. The following can be used as a test program: int main() { static long long a[1024 * 1024 * 20] = { 0 }; return a;} Without the patch, the code oopses in atomic_long_dec_and_test() as called by fput() after the kernel complains that it can't allocate that big a chunk of memory. With the patch, the kernel just complains about the allocation size and then the program segfaults during execve() as execve() can't complete the allocation of all the new ELF program segments. Reported-by: Robin Getz Signed-off-by: David Howells Acked-by: Robin Getz Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- mm/nommu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/nommu.c b/mm/nommu.c index 5189b5aed8c..9876fa0c3ad 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -1362,9 +1362,11 @@ share: error_just_free: up_write(&nommu_region_sem); error: - fput(region->vm_file); + if (region->vm_file) + fput(region->vm_file); kmem_cache_free(vm_region_jar, region); - fput(vma->vm_file); + if (vma->vm_file) + fput(vma->vm_file); if (vma->vm_flags & VM_EXECUTABLE) removed_exe_file_vma(vma->vm_mm); kmem_cache_free(vm_area_cachep, vma); -- GitLab From aefba418bfecd1985a08f50a95bd854a119f0153 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Fri, 30 Oct 2009 17:02:31 +0900 Subject: [PATCH 0420/1165] dpt_i2o: Fix typo of EINVAL Commit ef7562b7f28319e6dd1f85dc1af87df2a7a84832 ("dpt_i2o: Fix up copy*user") had a silly typo: EINVAL should be -EINVAL. Signed-off-by: OGAWA Hirofumi Cc: stable@kernel.org Cc: Alan Cox Signed-off-by: Linus Torvalds --- drivers/scsi/dpt_i2o.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c index 7d1aac31ec8..496764349c4 100644 --- a/drivers/scsi/dpt_i2o.c +++ b/drivers/scsi/dpt_i2o.c @@ -1919,7 +1919,7 @@ static int adpt_i2o_passthru(adpt_hba* pHba, u32 __user *arg) size = size>>16; size *= 4; if (size > MAX_MESSAGE_SIZE) { - rcode = EINVAL; + rcode = -EINVAL; goto cleanup; } /* Copy in the user's I2O command */ -- GitLab From 426fcd2a351e4bf662fee9fa2cf2603a48223164 Mon Sep 17 00:00:00 2001 From: Philby John Date: Wed, 28 Oct 2009 19:09:12 +0100 Subject: [PATCH 0421/1165] ARM: 5774/1: Fix Realview ARM1176PB board reboot This is the fix for proper reboot of Realview ARM1176PB board when issuing the reboot command. Setting the eighth bit of control register SYS_RESETCTL to 1 to force a soft reset. arch_reset() is modified for realview machines to call machine specific reset function pointers. Signed-off-by: Philby John Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mach-realview/core.h | 2 +- .../mach-realview/include/mach/board-pb1176.h | 5 +++++ .../mach-realview/include/mach/board-pb11mp.h | 12 ++++++++++++ arch/arm/mach-realview/include/mach/platform.h | 15 +-------------- arch/arm/mach-realview/include/mach/system.h | 10 ++++------ arch/arm/mach-realview/realview_pb1176.c | 11 +++++++++++ arch/arm/mach-realview/realview_pb11mp.c | 16 ++++++++++++++++ 7 files changed, 50 insertions(+), 21 deletions(-) diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 46cd6acb4d4..699671fa6e0 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -61,5 +61,5 @@ extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); - +extern void (*realview_reset)(char); #endif diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h index 98f8e7eeacc..34b80b7d40b 100644 --- a/arch/arm/mach-realview/include/mach/board-pb1176.h +++ b/arch/arm/mach-realview/include/mach/board-pb1176.h @@ -73,4 +73,9 @@ #define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */ #define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */ +/* + * Control register SYS_RESETCTL is set to 1 to force a soft reset + */ +#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL 0x0100 + #endif /* __ASM_ARCH_BOARD_PB1176_H */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index f0d68e0fea0..7abf918b77e 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -81,4 +81,16 @@ #define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */ #define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */ + /* + * Values for REALVIEW_SYS_RESET_CTRL + */ +#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR 0x01 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT 0x02 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET 0x03 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET 0x04 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR 0x05 +#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC 0x06 + +#define REALVIEW_PB11MP_SYS_CTRL_LED (1 << 0) + #endif /* __ASM_ARCH_BOARD_PB11MP_H */ diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h index c8f50835fed..4f46bf71e75 100644 --- a/arch/arm/mach-realview/include/mach/platform.h +++ b/arch/arm/mach-realview/include/mach/platform.h @@ -119,19 +119,6 @@ #define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET) #define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET) -/* - * Values for REALVIEW_SYS_RESET_CTRL - */ -#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01 -#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02 -#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03 -#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04 -#define REALVIEW_SYS_CTRL_RESET_POR 0x05 -#define REALVIEW_SYS_CTRL_RESET_DoC 0x06 - -#define REALVIEW_SYS_CTRL_LED (1 << 0) - - /* ------------------------------------------------------------------------ * RealView control registers * ------------------------------------------------------------------------ @@ -153,7 +140,7 @@ * SYS_CLD, SYS_BOOTCS */ #define REALVIEW_SYS_LOCK_LOCKED (1 << 16) -#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */ +#define REALVIEW_SYS_LOCKVAL_MASK 0xA05F /* Enable write access */ /* * REALVIEW_SYS_FLASH diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index 1a15a441e02..a30f2e3ec17 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -25,6 +25,8 @@ #include #include +void (*realview_reset)(char mode); + static inline void arch_idle(void) { /* @@ -36,16 +38,12 @@ static inline void arch_idle(void) static inline void arch_reset(char mode, const char *cmd) { - void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET; - unsigned int val; - /* * To reset, we hit the on-board reset register * in the system FPGA */ - val = __raw_readl(hdr_ctrl); - val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR; - __raw_writel(val, hdr_ctrl); + if (realview_reset) + realview_reset(mode); } #endif diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 2817fe09931..a6ba147692c 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -290,6 +290,16 @@ static struct sys_timer realview_pb1176_timer = { .init = realview_pb1176_timer_init, }; +static void realview_pb1176_reset(char mode) +{ + void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_RESETCTL_OFFSET; + void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_LOCK_OFFSET; + __raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl); + __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl); +} + static void __init realview_pb1176_init(void) { int i; @@ -313,6 +323,7 @@ static void __init realview_pb1176_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif + realview_reset = realview_pb1176_reset; } MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 94680fcf726..070d284ce96 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -299,6 +299,21 @@ static struct sys_timer realview_pb11mp_timer = { .init = realview_pb11mp_timer_init, }; +static void realview_pb11mp_reset(char mode) +{ + void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + + REALVIEW_SYS_RESETCTL_OFFSET; + unsigned int val; + + /* + * To reset, we hit the on-board reset register + * in the system FPGA + */ + val = __raw_readl(hdr_ctrl); + val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR; + __raw_writel(val, hdr_ctrl); +} + static void __init realview_pb11mp_init(void) { int i; @@ -324,6 +339,7 @@ static void __init realview_pb11mp_init(void) #ifdef CONFIG_LEDS leds_event = realview_leds_event; #endif + realview_reset = realview_pb11mp_reset; } MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") -- GitLab From 16121d70fdf9eeb05ead46b241a293156323dbbe Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Sun, 1 Nov 2009 19:27:05 -0500 Subject: [PATCH 0422/1165] x86: Fix printk message typo in mtrr cleanup code Trivial typo. Signed-off-by: Dave Jones LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/mtrr/cleanup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/mtrr/cleanup.c b/arch/x86/kernel/cpu/mtrr/cleanup.c index 315738c74aa..73c86db5acb 100644 --- a/arch/x86/kernel/cpu/mtrr/cleanup.c +++ b/arch/x86/kernel/cpu/mtrr/cleanup.c @@ -846,7 +846,7 @@ int __init mtrr_cleanup(unsigned address_bits) sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL); range_sums = sum_ranges(range, nr_range); - printk(KERN_INFO "total RAM coverred: %ldM\n", + printk(KERN_INFO "total RAM covered: %ldM\n", range_sums >> (20 - PAGE_SHIFT)); if (mtrr_chunk_size && mtrr_gran_size) { -- GitLab From a1bf808849f25a4d668f81415ecebb2da9fecf8e Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Sun, 1 Nov 2009 18:32:29 -0500 Subject: [PATCH 0423/1165] ALSA: hda: Use quirk mask for Dell Inspiron Mini9/Vostro A90 using ALC268 BugLink: https://bugs.launchpad.net/bugs/368629 We should use a quirk mask for these Dell Inspiron Mini9s and Vostro A90s, as the model=dell quirk appears to enable audio on them. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9b1cff83497..148734d1613 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -12602,7 +12602,8 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One", ALC268_ACER_ASPIRE_ONE), SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL), - SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL), + SND_PCI_QUIRK_MASK(0x1028, 0xfff0, 0x02b0, + "Dell Inspiron Mini9/Vostro A90", ALC268_DELL), /* almost compatible with toshiba but with optional digital outs; * auto-probing seems working fine */ -- GitLab From ad0bf11070ebb3c95f8ce82e6219dbd79c8e8b69 Mon Sep 17 00:00:00 2001 From: Alberto Bertogli Date: Mon, 2 Nov 2009 11:39:22 +0100 Subject: [PATCH 0424/1165] bio_put(): add bio_clone() to the list of functions in the comment In bio_put()'s comment, add bio_clone() to the list of functions that can give you a bio reference. Signed-off-by: Alberto Bertogli Signed-off-by: Jens Axboe --- fs/bio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/bio.c b/fs/bio.c index 402cb84a92a..bcab9e93d3a 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -407,7 +407,7 @@ EXPORT_SYMBOL(zero_fill_bio); * * Description: * Put a reference to a &struct bio, either one you have gotten with - * bio_alloc or bio_get. The last put of a bio will free it. + * bio_alloc, bio_get or bio_clone. The last put of a bio will free it. **/ void bio_put(struct bio *bio) { -- GitLab From 5f04eeb8a76521dec371ceb05e8263889a8af2bc Mon Sep 17 00:00:00 2001 From: Alberto Bertogli Date: Mon, 2 Nov 2009 11:39:42 +0100 Subject: [PATCH 0425/1165] Fix bio_alloc() and bio_kmalloc() documentation Commit 451a9ebf accidentally broke bio_alloc() and bio_kmalloc() comments by (almost) swapping them. This patch fixes that, by placing the comments in the right place. Signed-off-by: Alberto Bertogli Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- fs/bio.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index bcab9e93d3a..12da5db8682 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -325,8 +325,16 @@ static void bio_fs_destructor(struct bio *bio) * @gfp_mask: allocation mask to use * @nr_iovecs: number of iovecs * - * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask - * contains __GFP_WAIT, the allocation is guaranteed to succeed. + * bio_alloc will allocate a bio and associated bio_vec array that can hold + * at least @nr_iovecs entries. Allocations will be done from the + * fs_bio_set. Also see @bio_alloc_bioset and @bio_kmalloc. + * + * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate + * a bio. This is due to the mempool guarantees. To make this work, callers + * must never allocate more than 1 bio at a time from this pool. Callers + * that need to allocate more than 1 bio must always submit the previously + * allocated bio for IO before attempting to allocate a new one. Failure to + * do so can cause livelocks under memory pressure. * * RETURNS: * Pointer to new bio on success, NULL on failure. @@ -350,21 +358,13 @@ static void bio_kmalloc_destructor(struct bio *bio) } /** - * bio_alloc - allocate a bio for I/O + * bio_kmalloc - allocate a bio for I/O using kmalloc() * @gfp_mask: the GFP_ mask given to the slab allocator * @nr_iovecs: number of iovecs to pre-allocate * * Description: - * bio_alloc will allocate a bio and associated bio_vec array that can hold - * at least @nr_iovecs entries. Allocations will be done from the - * fs_bio_set. Also see @bio_alloc_bioset. - * - * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate - * a bio. This is due to the mempool guarantees. To make this work, callers - * must never allocate more than 1 bio at a time from this pool. Callers - * that need to allocate more than 1 bio must always submit the previously - * allocated bio for IO before attempting to allocate a new one. Failure to - * do so can cause livelocks under memory pressure. + * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask contains + * %__GFP_WAIT, the allocation is guaranteed to succeed. * **/ struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs) -- GitLab From 0d488234fd857aae07f1c56467bbf58f1a859753 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 24 Oct 2009 21:43:03 +0200 Subject: [PATCH 0426/1165] ALSA: pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (sound) Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of requiring manual settings of PCMCIA_DEBUG. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. Signed-off-by: Dominik Brodowski Signed-off-by: Takashi Iwai --- sound/pcmcia/pdaudiocf/pdaudiocf.c | 21 ++++++++++++--------- sound/pcmcia/vx/vxpocket.c | 21 ++++++++++++--------- 2 files changed, 24 insertions(+), 18 deletions(-) diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf.c b/sound/pcmcia/pdaudiocf/pdaudiocf.c index 7dea74b71cf..64b859925c0 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf.c @@ -217,20 +217,25 @@ static void snd_pdacf_detach(struct pcmcia_device *link) * configuration callback */ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - static int pdacf_config(struct pcmcia_device *link) { struct snd_pdacf *pdacf = link->priv; - int last_fn, last_ret; + int ret; snd_printdd(KERN_DEBUG "pdacf_config called\n"); link->conf.ConfigIndex = 0x5; - CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io)); - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_io(link, &link->io); + if (ret) + goto failed; + + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; + + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq.AssignedIRQ) < 0) goto failed; @@ -238,8 +243,6 @@ static int pdacf_config(struct pcmcia_device *link) link->dev_node = &pdacf->node; return 0; -cs_failed: - cs_error(link, last_fn, last_ret); failed: pcmcia_disable_device(link); return -ENODEV; diff --git a/sound/pcmcia/vx/vxpocket.c b/sound/pcmcia/vx/vxpocket.c index 7445cc8a47d..1492744ad67 100644 --- a/sound/pcmcia/vx/vxpocket.c +++ b/sound/pcmcia/vx/vxpocket.c @@ -213,14 +213,11 @@ static int snd_vxpocket_assign_resources(struct vx_core *chip, int port, int irq * configuration callback */ -#define CS_CHECK(fn, ret) \ -do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) - static int vxpocket_config(struct pcmcia_device *link) { struct vx_core *chip = link->priv; struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip; - int last_fn, last_ret; + int ret; snd_printdd(KERN_DEBUG "vxpocket_config called\n"); @@ -235,9 +232,17 @@ static int vxpocket_config(struct pcmcia_device *link) strcpy(chip->card->driver, vxp440_hw.name); } - CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io)); - CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq)); - CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_io(link, &link->io); + if (ret) + goto failed; + + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; + + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; chip->dev = &handle_to_dev(link); snd_card_set_dev(chip->card, chip->dev); @@ -248,8 +253,6 @@ static int vxpocket_config(struct pcmcia_device *link) link->dev_node = &vxp->node; return 0; -cs_failed: - cs_error(link, last_fn, last_ret); failed: pcmcia_disable_device(link); return -ENODEV; -- GitLab From 22242681cff52bfb7cba5d2a37b91802be7a4e4c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 2 Nov 2009 12:00:01 +0100 Subject: [PATCH 0427/1165] MIPS: Extend COMMAND_LINE_SIZE Some firmware may pass well over 256 bytes these days. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/setup.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/setup.h b/arch/mips/include/asm/setup.h index e600cedda97..50511aac04e 100644 --- a/arch/mips/include/asm/setup.h +++ b/arch/mips/include/asm/setup.h @@ -1,7 +1,7 @@ #ifndef _MIPS_SETUP_H #define _MIPS_SETUP_H -#define COMMAND_LINE_SIZE 256 +#define COMMAND_LINE_SIZE 4096 #ifdef __KERNEL__ extern void setup_early_printk(void); -- GitLab From d30cecbcbe149a36a354757cea835c1bb28689cf Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 27 May 2009 17:29:37 +0100 Subject: [PATCH 0428/1165] MIPS: Don't write ones to reserved entryhi bits. We've silently been relying on the hardware chopping off excess, reserved ASID bits for no better reason that it saving an instruction. Because we already have: #define cpu_asid(cpu, mm) (cpu_context((cpu), (mm)) & ASID_MASK) in . We can use a cleanup to avoid writing non-zero bits into the reserved entryhi bits. This avoid triggering some debugging assertion in the Cavium simulator. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mmu_context.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index d9743536a62..ed331c2e488 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -165,12 +165,12 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, * having ASID_MASK smaller than the hardware maximum, * make sure no "soft" bits become "hard"... */ - write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) - | (cpu_context(cpu, next) & ASID_MASK)); + write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | + cpu_asid(cpu, next)); ehb(); /* Make sure it propagates to TCStatus */ evpe(mtflags); #else - write_c0_entryhi(cpu_context(cpu, next)); + write_c0_entryhi(cpu_asid(cpu, next)); #endif /* CONFIG_MIPS_MT_SMTC */ TLBMISS_HANDLER_SETUP_PGD(next->pgd); @@ -226,11 +226,11 @@ activate_mm(struct mm_struct *prev, struct mm_struct *next) } /* See comments for similar code above */ write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) | - (cpu_context(cpu, next) & ASID_MASK)); + cpu_asid(cpu, next)); ehb(); /* Make sure it propagates to TCStatus */ evpe(mtflags); #else - write_c0_entryhi(cpu_context(cpu, next)); + write_c0_entryhi(cpu_asid(cpu, next)); #endif /* CONFIG_MIPS_MT_SMTC */ TLBMISS_HANDLER_SETUP_PGD(next->pgd); -- GitLab From 067f3290f7508f492e2f838222766fa1874606c5 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 1 Oct 2009 16:47:38 -0700 Subject: [PATCH 0429/1165] MIPS: Octeon: Fix compile error in arch/mips/cavium-octeon/smp.c Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/smp.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 32d51a31dc4..c198efdf583 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -65,11 +65,12 @@ void octeon_send_ipi_single(int cpu, unsigned int action) cvmx_write_csr(CVMX_CIU_MBOX_SETX(coreid), action); } -static inline void octeon_send_ipi_mask(cpumask_t mask, unsigned int action) +static inline void octeon_send_ipi_mask(const struct cpumask *mask, + unsigned int action) { unsigned int i; - for_each_cpu_mask(i, mask) + for_each_cpu_mask(i, *mask) octeon_send_ipi_single(i, action); } -- GitLab From 962a9dd47e7d92a9b29e7114c108bcff3ad0eb05 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 7 Oct 2009 01:59:20 +0200 Subject: [PATCH 0430/1165] MIPS: Cleanup CONFIG_DEBUG_STACK_USAGE version of alloc_thread_info. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/thread_info.h | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index 01cc1630b66..845da2107ed 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -86,14 +86,7 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR #ifdef CONFIG_DEBUG_STACK_USAGE -#define alloc_thread_info(tsk) \ -({ \ - struct thread_info *ret; \ - \ - ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \ - \ - ret; \ -}) +#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL) #else #define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL) #endif -- GitLab From 01a6fbf759a17940079fbdc0a4d43b596f323e7b Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 7 Oct 2009 22:11:08 +0200 Subject: [PATCH 0431/1165] MIPS: IP27: Fix build Broken by 182a85f8a119c789610a9d464f4129ded9f3c107. Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-ip27/topology.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/include/asm/mach-ip27/topology.h b/arch/mips/include/asm/mach-ip27/topology.h index f6837422fe6..09a59bcc1b0 100644 --- a/arch/mips/include/asm/mach-ip27/topology.h +++ b/arch/mips/include/asm/mach-ip27/topology.h @@ -44,8 +44,8 @@ extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES]; .busy_factor = 32, \ .imbalance_pct = 125, \ .cache_nice_tries = 1, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_EXEC \ + .flags = SD_LOAD_BALANCE | \ + SD_BALANCE_EXEC, \ .last_balance = jiffies, \ .balance_interval = 1, \ .nr_balance_failed = 0, \ -- GitLab From b40bb20e74a02dbe80fc7be6d0f9f05344051d20 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 8 Oct 2009 20:39:50 +0800 Subject: [PATCH 0432/1165] MIPS: Loongson: Remove redundant local_irq_disable() That code is executed with irq disabled already, so, remove the redundant local_irq_disable() here. Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle --- arch/mips/loongson/common/irq.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c index f368c735cbd..b32b4a3e513 100644 --- a/arch/mips/loongson/common/irq.c +++ b/arch/mips/loongson/common/irq.c @@ -55,7 +55,6 @@ void __init arch_init_irq(void) * int-handler is not on bootstrap */ clear_c0_status(ST0_IM | ST0_BEV); - local_irq_disable(); /* setting irq trigger mode */ set_irq_trigger_mode(); -- GitLab From f45e5183618e41e3c8dbf87b74dc47d0c531462a Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Thu, 8 Oct 2009 21:17:54 +0800 Subject: [PATCH 0433/1165] MIPS: Add IRQF_TIMER flag for timer interrupts Along the lines of d6c585a4342a2ff627a29f9aea77c5ed4cd76023, add IRQF_TIMER flag for all timer interrupts This ensures that timer interrupts won't be disabled on suspend and not threaded for PREEMPT_RT. Signed-off-by: Wu Zhangjin Acked-by: Thomas Gleixner Signed-off-by: Ralf Baechle --- arch/mips/jazz/irq.c | 2 +- arch/mips/kernel/cevt-gt641xx.c | 2 +- arch/mips/kernel/cevt-r4k.c | 2 +- arch/mips/kernel/i8253.c | 2 +- arch/mips/nxp/pnx8550/common/time.c | 2 +- arch/mips/sgi-ip27/ip27-timer.c | 2 +- arch/mips/sni/time.c | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index 7fd170d007e..7bd32d04c2c 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -134,7 +134,7 @@ static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id) static struct irqaction r4030_timer_irqaction = { .handler = r4030_timer_interrupt, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_TIMER, .name = "R4030 timer", }; diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c index 92351e00ae0..f5d265eb6ea 100644 --- a/arch/mips/kernel/cevt-gt641xx.c +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -113,7 +113,7 @@ static irqreturn_t gt641xx_timer0_interrupt(int irq, void *dev_id) static struct irqaction gt641xx_timer0_irqaction = { .handler = gt641xx_timer0_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "gt641xx_timer0", }; diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c index 2652362ce04..b469ad05d52 100644 --- a/arch/mips/kernel/cevt-r4k.c +++ b/arch/mips/kernel/cevt-r4k.c @@ -83,7 +83,7 @@ out: struct irqaction c0_compare_irqaction = { .handler = c0_compare_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "timer", }; diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c index f7d8d5d0ddb..ed5c441615e 100644 --- a/arch/mips/kernel/i8253.c +++ b/arch/mips/kernel/i8253.c @@ -98,7 +98,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) static struct irqaction irq0 = { .handler = timer_interrupt, - .flags = IRQF_DISABLED | IRQF_NOBALANCING, + .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER, .name = "timer" }; diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c index 18b19278487..d987a89c1e4 100644 --- a/arch/mips/nxp/pnx8550/common/time.c +++ b/arch/mips/nxp/pnx8550/common/time.c @@ -59,7 +59,7 @@ static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id) static struct irqaction pnx8xxx_timer_irq = { .handler = pnx8xxx_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "pnx8xxx_timer", }; diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 6d0e59ffba2..d6802d6d1f8 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -105,7 +105,7 @@ static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id) struct irqaction hub_rt_irqaction = { .handler = hub_rt_counter_handler, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "hub-rt", }; diff --git a/arch/mips/sni/time.c b/arch/mips/sni/time.c index 62df6a598e0..f3b60e67120 100644 --- a/arch/mips/sni/time.c +++ b/arch/mips/sni/time.c @@ -67,7 +67,7 @@ static irqreturn_t a20r_interrupt(int irq, void *dev_id) static struct irqaction a20r_irqaction = { .handler = a20r_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "a20r-timer", }; -- GitLab From a22d621c80fb08f668ae3bfe62aeaae64b0b2b89 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 8 Oct 2009 22:16:47 +0200 Subject: [PATCH 0434/1165] MIPS: VPE: Remove stray unlock_kernel. Signed-off-by: Ralf Baechle Reported-by: Josip Rodin --- arch/mips/kernel/vpe.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 03092ab2a29..60477529362 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -1116,8 +1116,6 @@ static int vpe_open(struct inode *inode, struct file *filp) v->shared_ptr = NULL; v->__start = 0; - unlock_kernel(); - return 0; } -- GitLab From 80b8585b07feede94a742c4cdb80ab607a8813b3 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Sat, 10 Oct 2009 19:19:49 +0800 Subject: [PATCH 0435/1165] MIPS: 64-bit: Fix o32 lookup_dcookie syscall An o32 aplication passes a 64-bit value in a pair of registers; a 64-bit kernel expects a 64-bit argument in a single register. Signed-off-by: Chen Jie Signed-off-by: Hu Hongbing Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle --- arch/mips/kernel/linux32.c | 6 ++++++ arch/mips/kernel/scall64-o32.S | 2 +- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 6242bc68add..b77fefaff9d 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -428,3 +428,9 @@ _sys32_clone(nabi_no_regargs struct pt_regs regs) return do_fork(clone_flags, newsp, ®s, 0, parent_tidptr, child_tidptr); } + +asmlinkage long sys32_lookup_dcookie(u32 a0, u32 a1, char __user *buf, + size_t len) +{ + return sys_lookup_dcookie(merge_64(a0, a1), buf, len); +} diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 9bbf9775e0b..ba0dde6465a 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -450,7 +450,7 @@ sys_call_table: PTR sys_io_submit PTR sys_io_cancel /* 4245 */ PTR sys_exit_group - PTR sys_lookup_dcookie + PTR sys32_lookup_dcookie PTR sys_epoll_create PTR sys_epoll_ctl PTR sys_epoll_wait /* 4250 */ -- GitLab From c49e38c1a5e1c814f07365e7a5773801e20e26b5 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Sat, 10 Oct 2009 23:26:35 +0800 Subject: [PATCH 0436/1165] MIPS: Add IRQF_TIMER flag for timer interrupts As the commit 3ee4c147 shows, we need to "Add IRQF_TIMER flag for timer interrupts", Atsushi Nemoto have reported that some other timer interrupts should be considered, Here it is. Acked-by: Thomas Gleixner Acked-by: Rafael J. Wysocki Signed-off-by: Wu Zhangjin Signed-off-by: Ralf Baechle --- arch/mips/kernel/cevt-bcm1480.c | 2 +- arch/mips/kernel/cevt-ds1287.c | 2 +- arch/mips/kernel/cevt-sb1250.c | 2 +- arch/mips/kernel/cevt-txx9.c | 2 +- arch/mips/nxp/pnx8550/common/int.c | 2 +- arch/mips/nxp/pnx8550/common/time.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/mips/kernel/cevt-bcm1480.c b/arch/mips/kernel/cevt-bcm1480.c index e02f79b1eb5..bfea327c636 100644 --- a/arch/mips/kernel/cevt-bcm1480.c +++ b/arch/mips/kernel/cevt-bcm1480.c @@ -144,7 +144,7 @@ void __cpuinit sb1480_clockevent_init(void) bcm1480_unmask_irq(cpu, irq); action->handler = sibyte_counter_handler; - action->flags = IRQF_DISABLED | IRQF_PERCPU; + action->flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER; action->name = name; action->dev_id = cd; diff --git a/arch/mips/kernel/cevt-ds1287.c b/arch/mips/kernel/cevt-ds1287.c index 6996da4d74a..00a4da277cb 100644 --- a/arch/mips/kernel/cevt-ds1287.c +++ b/arch/mips/kernel/cevt-ds1287.c @@ -107,7 +107,7 @@ static irqreturn_t ds1287_interrupt(int irq, void *dev_id) static struct irqaction ds1287_irqaction = { .handler = ds1287_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "ds1287", }; diff --git a/arch/mips/kernel/cevt-sb1250.c b/arch/mips/kernel/cevt-sb1250.c index ac5903d1b20..da78eeaea6e 100644 --- a/arch/mips/kernel/cevt-sb1250.c +++ b/arch/mips/kernel/cevt-sb1250.c @@ -143,7 +143,7 @@ void __cpuinit sb1250_clockevent_init(void) sb1250_unmask_irq(cpu, irq); action->handler = sibyte_counter_handler; - action->flags = IRQF_DISABLED | IRQF_PERCPU; + action->flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER; action->name = name; action->dev_id = cd; diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index 0037f21baf0..218ee6bda93 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -146,7 +146,7 @@ static irqreturn_t txx9tmr_interrupt(int irq, void *dev_id) static struct irqaction txx9tmr_irq = { .handler = txx9tmr_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU, + .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, .name = "txx9tmr", .dev_id = &txx9_clock_event_device, }; diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c index f080f114a1b..7aca7d5375e 100644 --- a/arch/mips/nxp/pnx8550/common/int.c +++ b/arch/mips/nxp/pnx8550/common/int.c @@ -172,7 +172,7 @@ static struct irqaction gic_action = { static struct irqaction timer_action = { .handler = no_action, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_TIMER, .name = "Timer", }; diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c index d987a89c1e4..8836c6203df 100644 --- a/arch/mips/nxp/pnx8550/common/time.c +++ b/arch/mips/nxp/pnx8550/common/time.c @@ -72,7 +72,7 @@ static irqreturn_t monotonic_interrupt(int irq, void *dev_id) static struct irqaction monotonic_irqaction = { .handler = monotonic_interrupt, - .flags = IRQF_DISABLED, + .flags = IRQF_DISABLED | IRQF_TIMER, .name = "Monotonic timer", }; -- GitLab From a2e62f3a852e1e8187853291f5ee09ad4c881fcc Mon Sep 17 00:00:00 2001 From: Ralf Roesch Date: Wed, 16 Sep 2009 08:01:20 +0200 Subject: [PATCH 0437/1165] MIPS: TXx9: Fix error handling / Fix for noenexisting gpio_remove. Error was introduced by commit 0385d1f3d394c6814be0b165c153fc3fc254469a. Signed-off-by: Ralf Roesch Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index c860810722c..dfe4720ac82 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -817,7 +817,8 @@ void __init txx9_iocled_init(unsigned long baseaddr, out_pdev: platform_device_put(pdev); out_gpio: - gpio_remove(&iocled->chip); + if (gpiochip_remove(&iocled->chip)) + return; out_unmap: iounmap(iocled->mmioaddr); out_free: -- GitLab From e85d59df13cf5cce08becb3fd261048e6d870c0d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 31 Aug 2009 20:27:39 +0200 Subject: [PATCH 0438/1165] MIPS: BCM63xx: Fix soft-reset lockup on BCM6345 This patch fixes a lockup on BCM6345 where setting the PLL soft reset bit will also lock the other blocks including UART. Instead of setting only the PLL soft reset bit in the software reset register, set this bit but do not touch the others. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/setup.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c index b18a0ca926f..d0056598fbf 100644 --- a/arch/mips/bcm63xx/setup.c +++ b/arch/mips/bcm63xx/setup.c @@ -75,7 +75,9 @@ void bcm63xx_machine_reboot(void) bcm6348_a1_reboot(); printk(KERN_INFO "triggering watchdog soft-reset...\n"); - bcm_perf_writel(SYS_PLL_SOFT_RESET, PERF_SYS_PLL_CTL_REG); + reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG); + reg |= SYS_PLL_SOFT_RESET; + bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG); while (1) ; } -- GitLab From e85843a1e1974167878e6124a91a06036c3b849d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 17 Aug 2009 00:28:24 +0200 Subject: [PATCH 0439/1165] MIPS: AU1000: Fix build failure for db1x00 configured for Au1100 SoC This patch fixes the following warning, which becomes an error due to -Werror to be turned on: CC arch/mips/alchemy/common/gpiolib-au1000.o cc1: warnings being treated as errors arch/mips/alchemy/common/gpiolib-au1000.c: In function 'au1100_gpio2_to_irq': /home/florian/dev/kernel/linux-queue/arch/mips/include/asm/mach-au1x00/gpio-au1000.h:107: warning: control reaches end of non-void function Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-au1x00/gpio-au1000.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index feea00148b5..91595fa8903 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -104,6 +104,8 @@ static inline int au1100_gpio2_to_irq(int gpio) if ((gpio >= 8) && (gpio <= 15)) return MAKE_IRQ(0, 29); /* shared GPIO208_215 */ + + return -ENXIO; } #ifdef CONFIG_SOC_AU1100 -- GitLab From 6c1e7a5ad9ac40c9bf45381409dc16207b6ffceb Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 10 Aug 2009 21:42:54 +0200 Subject: [PATCH 0440/1165] MIPS: BCM63xx: Make bcm63xx_uart_register an initfunc This patch removes the calls to bcm63xx_uart_register in board_bcm963xx.c and make bcm63xx_uart_register an initfunc. Allows us to remove bcm63xx_dev_uart.h which was there to make checkpatch.pl happy. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/boards/board_bcm963xx.c | 3 --- arch/mips/bcm63xx/dev-uart.c | 2 +- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h | 6 ------ 3 files changed, 1 insertion(+), 10 deletions(-) delete mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 78e155d21be..05a35cf5963 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #define PFX "board_bcm963xx: " @@ -794,8 +793,6 @@ int __init board_register_devices(void) { u32 val; - bcm63xx_uart_register(); - if (board.has_pccard) bcm63xx_pcmcia_register(); diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c index 5f3d89c4a98..b0519461ad9 100644 --- a/arch/mips/bcm63xx/dev-uart.c +++ b/arch/mips/bcm63xx/dev-uart.c @@ -10,7 +10,6 @@ #include #include #include -#include static struct resource uart_resources[] = { { @@ -39,3 +38,4 @@ int __init bcm63xx_uart_register(void) uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0); return platform_device_register(&bcm63xx_uart_device); } +arch_initcall(bcm63xx_uart_register); diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h deleted file mode 100644 index bf348f573bb..00000000000 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef BCM63XX_DEV_UART_H_ -#define BCM63XX_DEV_UART_H_ - -int bcm63xx_uart_register(void); - -#endif /* BCM63XX_DEV_UART_H_ */ -- GitLab From 2cfac7f7f2e6d11bcba105b3d6ba4d96ba5ad349 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 10 Aug 2009 21:42:59 +0200 Subject: [PATCH 0441/1165] MIPS: BCM63xx: Prepare for watchdog support This patch prepares the board code to register a bcm63xx_wdt platform_device that we are going to use in a subsequent patch. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/Makefile | 2 +- arch/mips/bcm63xx/dev-wdt.c | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 38 insertions(+), 1 deletion(-) create mode 100644 arch/mips/bcm63xx/dev-wdt.c diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile index c146d1edede..00064b66080 100644 --- a/arch/mips/bcm63xx/Makefile +++ b/arch/mips/bcm63xx/Makefile @@ -1,5 +1,5 @@ obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ - dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o + dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-y += boards/ diff --git a/arch/mips/bcm63xx/dev-wdt.c b/arch/mips/bcm63xx/dev-wdt.c new file mode 100644 index 00000000000..3e6c716a4c1 --- /dev/null +++ b/arch/mips/bcm63xx/dev-wdt.c @@ -0,0 +1,37 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Florian Fainelli + */ + +#include +#include +#include +#include + +static struct resource wdt_resources[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bcm63xx_wdt_device = { + .name = "bcm63xx-wdt", + .id = 0, + .num_resources = ARRAY_SIZE(wdt_resources), + .resource = wdt_resources, +}; + +int __init bcm63xx_wdt_register(void) +{ + wdt_resources[0].start = bcm63xx_regset_address(RSET_WDT); + wdt_resources[0].end = wdt_resources[0].start; + wdt_resources[0].end += RSET_WDT_SIZE - 1; + + return platform_device_register(&bcm63xx_wdt_device); +} +arch_initcall(bcm63xx_wdt_register); -- GitLab From 72838a170372d6bb44bcb04a81aa2c83312cfbc0 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 4 Aug 2009 23:09:36 +0200 Subject: [PATCH 0442/1165] MIPS: AR7: register watchdog device only if enabled in hw configuration This patch checks if the watchdog enable bit is set in the DCL register meaning that the hardware watchdog actually works and if so, register the ar7_wdt platform_device. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/ar7/platform.c | 9 ++++++++- arch/mips/include/asm/mach-ar7/ar7.h | 3 +++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index e2278c04459..835f3f0319c 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -503,6 +503,7 @@ static int __init ar7_register_devices(void) { u16 chip_id; int res; + u32 *bootcr, val; #ifdef CONFIG_SERIAL_8250 static struct uart_port uart_port[2]; @@ -595,7 +596,13 @@ static int __init ar7_register_devices(void) ar7_wdt_res.end = ar7_wdt_res.start + 0x20; - res = platform_device_register(&ar7_wdt); + bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); + val = *bootcr; + iounmap(bootcr); + + /* Register watchdog only if enabled in hardware */ + if (val & AR7_WDT_HW_ENA) + res = platform_device_register(&ar7_wdt); return res; } diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h index de71694614d..21cbbc70644 100644 --- a/arch/mips/include/asm/mach-ar7/ar7.h +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -78,6 +78,9 @@ #define AR7_REF_CLOCK 25000000 #define AR7_XTAL_CLOCK 24000000 +/* DCL */ +#define AR7_WDT_HW_ENA 0x10 + struct plat_cpmac_data { int reset_bit; int power_bit; -- GitLab From 39d2211d20518677511043d7ee16bbca6d0c5070 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Oct 2009 02:23:48 +0200 Subject: [PATCH 0443/1165] MIPS: MTX-1: Fix build if CONFIG_PCI is disabled. Signed-off-by: Ralf Baechle --- arch/mips/alchemy/mtx-1/board_setup.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index cc32c69a74a..45b61c9b82b 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -69,6 +69,7 @@ void __init board_setup(void) #else au_writel(0xf, Au1500_PCI_CFG); #endif + board_pci_idsel = mtx1_pci_idsel; #endif /* Initialize sys_pinfunc */ @@ -85,8 +86,6 @@ void __init board_setup(void) alchemy_gpio_direction_output(211, 1); /* green on */ alchemy_gpio_direction_output(212, 0); /* red off */ - board_pci_idsel = mtx1_pci_idsel; - printk(KERN_INFO "4G Systems MTX-1 Board\n"); } -- GitLab From 0f334a3e8c3586f81286345eb077ed32b375e8d6 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Mon, 7 Sep 2009 11:11:31 -0700 Subject: [PATCH 0444/1165] MIPS: Fix machine check exception in kmap_coherent() On an SMP system with cache aliases, the following sequence of events may happen: 1) copy_user_highpage() runs on CPU0, invoking kmap_coherent() to create a temporary mapping in the fixmap region 2) copy_page() starts on CPU0 3) CPU1 sends CPU0 an IPI asking CPU0 to run local_r4k_flush_cache_page() 4) CPU0 takes the interrupt, interrupting copy_page() 5) local_r4k_flush_cache_page() on CPU0 calls kmap_coherent() again 6) The second invocation of kmap_coherent() on CPU0 tries to use the same fixmap virtual address that was being used by copy_user_highpage() 7) CPU0 throws a machine check exception for the TLB address conflict Fixed by creating an extra set of fixmap entries for use in interrupt handlers. This prevents fixmap VA conflicts between copy_user_highpage() running in user context, and local_r4k_flush_cache_page() invoked from an SMP IPI. Signed-off-by: Kevin Cernekee Signed-off-by: Ralf Baechle --- arch/mips/include/asm/fixmap.h | 4 ++-- arch/mips/mm/init.c | 6 +++++- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h index efeddc8db8b..0b89b83e205 100644 --- a/arch/mips/include/asm/fixmap.h +++ b/arch/mips/include/asm/fixmap.h @@ -48,9 +48,9 @@ enum fixed_addresses { #define FIX_N_COLOURS 8 FIX_CMAP_BEGIN, #ifdef CONFIG_MIPS_MT_SMTC - FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS), + FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS * 2), #else - FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, + FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * 2), #endif #ifdef CONFIG_HIGHMEM /* reserved pte's for temporary kernel mappings */ diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 15aa1902a78..8d1f4f36304 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include @@ -132,7 +133,10 @@ void *kmap_coherent(struct page *page, unsigned long addr) inc_preempt_count(); idx = (addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1); #ifdef CONFIG_MIPS_MT_SMTC - idx += FIX_N_COLOURS * smp_processor_id(); + idx += FIX_N_COLOURS * smp_processor_id() + + (in_interrupt() ? (FIX_N_COLOURS * NR_CPUS) : 0); +#else + idx += in_interrupt() ? FIX_N_COLOURS : 0; #endif vaddr = __fix_to_virt(FIX_CMAP_END - idx); pte = mk_pte(page, PAGE_KERNEL); -- GitLab From accfd35a4e82148ff3d6e1946c1786e73fb408fd Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 10 Jul 2009 01:53:54 -0700 Subject: [PATCH 0445/1165] MIPS: MTI: Fix accesses to device registers on MIPS boards This fixes the remaining problems introduced by f197465384bf7ef1af184c2ed1a4e268911a91e3 (incorrect access length & byteswapping in bigendian mode) Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-int.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 3e0a9b35ba5..e568d0da060 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -87,7 +87,7 @@ static inline int mips_pcibios_iack(void) dummy = BONITO_PCIMAP_CFG; iob(); /* sync */ - irq = readl((u32 *)_pcictrl_bonito_pcicfg); + irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg); iob(); /* sync */ irq &= 0xff; BONITO_PCIMAP_CFG = 0; -- GitLab From c70887555143fdede9595df4c7a598676922f107 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Oct 2009 22:30:06 +0200 Subject: [PATCH 0446/1165] MIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT. Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 705a7a9170f..7159495ee0b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1012,9 +1012,8 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int - default "4" if MACH_DECSTATION || MIKROTIK_RB532 + default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON - default "4" if PMC_MSP4200_EVAL default "5" config HAVE_STD_PC_SERIAL_PORT -- GitLab From a951f2829adba3f2945172b740528fce4366907d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Oct 2009 22:54:47 +0200 Subject: [PATCH 0447/1165] MIPS: Malta: Enable PCI 2.1 compatibility in PIIX4 Based on original patch by Chris Dearman . Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-pci.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index b9743190609..efdb4f66ffc 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -241,3 +241,16 @@ void __init mips_pcibios_init(void) register_pci_controller(controller); } + +/* Enable PCI 2.1 compatibility in PIIX4 */ +static void __init quirk_dlcsetup(struct pci_dev *dev) +{ + u8 odlc, ndlc; + (void) pci_read_config_byte(dev, 0x82, &odlc); + /* Enable passive releases and delayed transaction */ + ndlc = odlc | 7; + (void) pci_write_config_byte(dev, 0x82, ndlc); +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, + quirk_dlcsetup); -- GitLab From a4e7cac18f074fa55142bc86cc35a74f3c6ea615 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 12 Oct 2009 23:20:20 +0200 Subject: [PATCH 0448/1165] MIPS: 1004K: Enable SPRAM support. Signed-off-by: Ralf Baechle --- arch/mips/kernel/spram.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c index 6ddb507a87e..71b47376cf7 100644 --- a/arch/mips/kernel/spram.c +++ b/arch/mips/kernel/spram.c @@ -208,6 +208,7 @@ __cpuinit void spram_config(void) case CPU_24K: case CPU_34K: case CPU_74K: + case CPU_1004K: config0 = read_c0_config(); /* FIXME: addresses are Malta specific */ if (config0 & (1<<24)) { -- GitLab From a074f0e89faa8989bdbd6110785d2aafe7df5285 Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 10 Jul 2009 01:51:27 -0700 Subject: [PATCH 0449/1165] MIPS: SPRAM: Clean up support code a little Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/include/asm/spram.h | 10 ++++++++++ arch/mips/kernel/cpu-probe.c | 8 +------- arch/mips/kernel/spram.c | 4 +--- 3 files changed, 12 insertions(+), 10 deletions(-) create mode 100644 arch/mips/include/asm/spram.h diff --git a/arch/mips/include/asm/spram.h b/arch/mips/include/asm/spram.h new file mode 100644 index 00000000000..0b89006e490 --- /dev/null +++ b/arch/mips/include/asm/spram.h @@ -0,0 +1,10 @@ +#ifndef _MIPS_SPRAM_H +#define _MIPS_SPRAM_H + +#ifdef CONFIG_CPU_MIPSR2 +extern __init void spram_config(void); +#else +static inline void spram_config(void) { }; +#endif /* CONFIG_CPU_MIPSR2 */ + +#endif /* _MIPS_SPRAM_H */ diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index f709657e4dc..7a51866068a 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -23,7 +23,7 @@ #include #include #include - +#include /* * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, * the implementation of the "wait" feature differs between CPU families. This @@ -711,12 +711,6 @@ static void __cpuinit decode_configs(struct cpuinfo_mips *c) mips_probe_watch_registers(c); } -#ifdef CONFIG_CPU_MIPSR2 -extern void spram_config(void); -#else -static inline void spram_config(void) {} -#endif - static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) { decode_configs(c); diff --git a/arch/mips/kernel/spram.c b/arch/mips/kernel/spram.c index 71b47376cf7..1821d12a641 100644 --- a/arch/mips/kernel/spram.c +++ b/arch/mips/kernel/spram.c @@ -13,7 +13,6 @@ #include #include -#include #include #include #include @@ -198,8 +197,7 @@ static __cpuinit void probe_spram(char *type, offset += 2 * SPRAM_TAG_STRIDE; } } - -__cpuinit void spram_config(void) +void __cpuinit spram_config(void) { struct cpuinfo_mips *c = ¤t_cpu_data; unsigned int config0; -- GitLab From cea2be444380fc1bf665cd023ed84be7e0872d28 Mon Sep 17 00:00:00 2001 From: Nigel Stephens Date: Mon, 12 Oct 2009 14:57:18 -0700 Subject: [PATCH 0450/1165] MIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands This patch ensures that the sign bit is always updated for NaN operands. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/math-emu/dp_simple.c | 13 ++++--------- arch/mips/math-emu/sp_simple.c | 11 +++-------- 2 files changed, 7 insertions(+), 17 deletions(-) diff --git a/arch/mips/math-emu/dp_simple.c b/arch/mips/math-emu/dp_simple.c index 1c555e6c6a9..d9ae1dbabda 100644 --- a/arch/mips/math-emu/dp_simple.c +++ b/arch/mips/math-emu/dp_simple.c @@ -62,8 +62,6 @@ ieee754dp ieee754dp_neg(ieee754dp x) return ieee754dp_nanxcpt(y, "neg"); } - if (ieee754dp_isnan(x)) /* but not infinity */ - return ieee754dp_nanxcpt(x, "neg", x); return x; } @@ -76,15 +74,12 @@ ieee754dp ieee754dp_abs(ieee754dp x) CLEARCX; FLUSHXDP; + /* Clear sign ALWAYS, irrespective of NaN */ + DPSIGN(x) = 0; + if (xc == IEEE754_CLASS_SNAN) { - SETCX(IEEE754_INVALID_OPERATION); - return ieee754dp_nanxcpt(ieee754dp_indef(), "neg"); + return ieee754dp_nanxcpt(ieee754dp_indef(), "abs"); } - if (ieee754dp_isnan(x)) /* but not infinity */ - return ieee754dp_nanxcpt(x, "abs", x); - - /* quick fix up */ - DPSIGN(x) = 0; return x; } diff --git a/arch/mips/math-emu/sp_simple.c b/arch/mips/math-emu/sp_simple.c index 770f0f4677c..3175477d36f 100644 --- a/arch/mips/math-emu/sp_simple.c +++ b/arch/mips/math-emu/sp_simple.c @@ -62,8 +62,6 @@ ieee754sp ieee754sp_neg(ieee754sp x) return ieee754sp_nanxcpt(y, "neg"); } - if (ieee754sp_isnan(x)) /* but not infinity */ - return ieee754sp_nanxcpt(x, "neg", x); return x; } @@ -76,15 +74,12 @@ ieee754sp ieee754sp_abs(ieee754sp x) CLEARCX; FLUSHXSP; + /* Clear sign ALWAYS, irrespective of NaN */ + SPSIGN(x) = 0; + if (xc == IEEE754_CLASS_SNAN) { - SETCX(IEEE754_INVALID_OPERATION); return ieee754sp_nanxcpt(ieee754sp_indef(), "abs"); } - if (ieee754sp_isnan(x)) /* but not infinity */ - return ieee754sp_nanxcpt(x, "abs", x); - - /* quick fix up */ - SPSIGN(x) = 0; return x; } -- GitLab From 2ee0a42961c942c6a2fb70700ef4e25c0acf5fca Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 10 Jul 2009 02:06:38 -0700 Subject: [PATCH 0451/1165] MIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start Signed-off-by: Chris Dearman (chris@mips.com) Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-amon.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/mips/mti-malta/malta-amon.c b/arch/mips/mti-malta/malta-amon.c index df9e526312a..469d9b0cee6 100644 --- a/arch/mips/mti-malta/malta-amon.c +++ b/arch/mips/mti-malta/malta-amon.c @@ -70,11 +70,12 @@ void amon_cpu_start(int cpu, launch->sp = sp; launch->a0 = a0; - /* Make sure target sees parameters before the go bit */ - smp_mb(); - + smp_wmb(); /* Target must see parameters before go */ launch->flags |= LAUNCH_FGO; + smp_wmb(); /* Target must see go before we poll */ + while ((launch->flags & LAUNCH_FGONE) == 0) ; + smp_rmb(); /* Target will be updating flags soon */ pr_debug("launch: cpu%d gone!\n", cpu); } -- GitLab From 7098f748283b4c056cca9c284c476b03f004ca12 Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 10 Jul 2009 01:54:09 -0700 Subject: [PATCH 0452/1165] MIPS: GIC: Random fixes and enhancements. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/include/asm/gcmpregs.h | 18 ++- arch/mips/include/asm/gic.h | 188 +++---------------------------- arch/mips/kernel/irq-gic.c | 114 +++++++------------ arch/mips/mti-malta/malta-int.c | 101 ++++++++++------- arch/mips/mti-malta/malta-pci.c | 14 ++- 5 files changed, 142 insertions(+), 293 deletions(-) diff --git a/arch/mips/include/asm/gcmpregs.h b/arch/mips/include/asm/gcmpregs.h index 36fd969d64d..c0cf76a2ca8 100644 --- a/arch/mips/include/asm/gcmpregs.h +++ b/arch/mips/include/asm/gcmpregs.h @@ -19,15 +19,20 @@ #define GCMP_GDB_OFS 0x8000 /* Global Debug Block */ /* Offsets to individual GCMP registers from GCMP base */ -#define GCMPOFS(block, tag, reg) (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS) +#define GCMPOFS(block, tag, reg) \ + (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS) +#define GCMPOFSn(block, tag, reg, n) \ + (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS(n)) #define GCMPGCBOFS(reg) GCMPOFS(GCB, GCB, reg) +#define GCMPGCBOFSn(reg, n) GCMPOFSn(GCB, GCB, reg, n) #define GCMPCLCBOFS(reg) GCMPOFS(CLCB, CCB, reg) #define GCMPCOCBOFS(reg) GCMPOFS(COCB, CCB, reg) #define GCMPGDBOFS(reg) GCMPOFS(GDB, GDB, reg) /* GCMP register access */ #define GCMPGCB(reg) REGP(_gcmp_base, GCMPGCBOFS(reg)) +#define GCMPGCBn(reg, n) REGP(_gcmp_base, GCMPGCBOFSn(reg, n)) #define GCMPCLCB(reg) REGP(_gcmp_base, GCMPCLCBOFS(reg)) #define GCMPCOCB(reg) REGP(_gcmp_base, GCMPCOCBOFS(reg)) #define GCMPGDB(reg) REGP(_gcmp_base, GCMPGDBOFS(reg)) @@ -49,10 +54,10 @@ #define GCMP_GCB_GCMPB_GCMPBASE_MSK GCMPGCBMSK(GCMPB_GCMPBASE, 17) #define GCMP_GCB_GCMPB_CMDEFTGT_SHF 0 #define GCMP_GCB_GCMPB_CMDEFTGT_MSK GCMPGCBMSK(GCMPB_CMDEFTGT, 2) -#define GCMP_GCB_GCMPB_CMDEFTGT_MEM 0 -#define GCMP_GCB_GCMPB_CMDEFTGT_MEM1 1 -#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2 -#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3 +#define GCMP_GCB_GCMPB_CMDEFTGT_DISABLED 0 +#define GCMP_GCB_GCMPB_CMDEFTGT_MEM 1 +#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2 +#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3 #define GCMP_GCB_CCMC_OFS 0x0010 /* Global CM Control */ #define GCMP_GCB_GCSRAP_OFS 0x0020 /* Global CSR Access Privilege */ #define GCMP_GCB_GCSRAP_CMACCESS_SHF 0 @@ -115,5 +120,6 @@ #define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */ extern int __init gcmp_probe(unsigned long, unsigned long); - +extern int __init gcmp_niocu(void); +extern void __init gcmp_setregion(int, unsigned long, unsigned long, int); #endif /* _ASM_GCMPREGS_H */ diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index a8f57341f12..9b9436a4d81 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -12,7 +12,6 @@ #define _ASM_GICREGS_H #undef GICISBYTELITTLEENDIAN -#define GICISWORDLITTLEENDIAN /* Constants */ #define GIC_POL_POS 1 @@ -20,11 +19,7 @@ #define GIC_TRIG_EDGE 1 #define GIC_TRIG_LEVEL 0 -#ifdef CONFIG_SMP #define GIC_NUM_INTRS (24 + NR_CPUS * 2) -#else -#define GIC_NUM_INTRS 32 -#endif #define MSK(n) ((1 << (n)) - 1) #define REG32(addr) (*(volatile unsigned int *) (addr)) @@ -70,13 +65,13 @@ #define USM_VISIBLE_SECTION_SIZE 0x10000 /* Register Map for Shared Section */ -#if defined(CONFIG_CPU_LITTLE_ENDIAN) || defined(GICISWORDLITTLEENDIAN) #define GIC_SH_CONFIG_OFS 0x0000 /* Shared Global Counter */ #define GIC_SH_COUNTER_31_00_OFS 0x0010 #define GIC_SH_COUNTER_63_32_OFS 0x0014 +#define GIC_SH_REVISIONID_OFS 0x0020 /* Interrupt Polarity */ #define GIC_SH_POL_31_0_OFS 0x0100 @@ -164,24 +159,31 @@ (GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + (((vpe) / 32) * 4)) #define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32)) +/* Convert an interrupt number to a byte offset/bit for multi-word registers */ +#define GIC_INTR_OFS(intr) (((intr) / 32)*4) +#define GIC_INTR_BIT(intr) ((intr) % 32) + /* Polarity : Reset Value is always 0 */ #define GIC_SH_SET_POLARITY_OFS 0x0100 #define GIC_SET_POLARITY(intr, pol) \ - GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + (((intr) / 32) * 4)), (pol) << ((intr) % 32)) + GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + \ + GIC_INTR_OFS(intr)), (pol) << GIC_INTR_BIT(intr)) /* Triggering : Reset Value is always 0 */ #define GIC_SH_SET_TRIGGER_OFS 0x0180 #define GIC_SET_TRIGGER(intr, trig) \ - GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + (((intr) / 32) * 4)), (trig) << ((intr) % 32)) + GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + \ + GIC_INTR_OFS(intr)), (trig) << GIC_INTR_BIT(intr)) /* Mask manipulation */ #define GIC_SH_SMASK_OFS 0x0380 -#define GIC_SET_INTR_MASK(intr, val) \ - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32))) - +#define GIC_SET_INTR_MASK(intr) \ + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + \ + GIC_INTR_OFS(intr)), 1 << GIC_INTR_BIT(intr)) #define GIC_SH_RMASK_OFS 0x0300 -#define GIC_CLR_INTR_MASK(intr, val) \ - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32))) +#define GIC_CLR_INTR_MASK(intr) \ + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + \ + GIC_INTR_OFS(intr)), 1 << GIC_INTR_BIT(intr)) /* Register Map for Local Section */ #define GIC_VPE_CTL_OFS 0x0000 @@ -219,161 +221,6 @@ #define GIC_UMV_SH_COUNTER_31_00_OFS 0x0000 #define GIC_UMV_SH_COUNTER_63_32_OFS 0x0004 -#else /* CONFIG_CPU_BIG_ENDIAN */ - -#define GIC_SH_CONFIG_OFS 0x0000 - -/* Shared Global Counter */ -#define GIC_SH_COUNTER_31_00_OFS 0x0014 -#define GIC_SH_COUNTER_63_32_OFS 0x0010 - -/* Interrupt Polarity */ -#define GIC_SH_POL_31_0_OFS 0x0104 -#define GIC_SH_POL_63_32_OFS 0x0100 -#define GIC_SH_POL_95_64_OFS 0x010c -#define GIC_SH_POL_127_96_OFS 0x0108 -#define GIC_SH_POL_159_128_OFS 0x0114 -#define GIC_SH_POL_191_160_OFS 0x0110 -#define GIC_SH_POL_223_192_OFS 0x011c -#define GIC_SH_POL_255_224_OFS 0x0118 - -/* Edge/Level Triggering */ -#define GIC_SH_TRIG_31_0_OFS 0x0184 -#define GIC_SH_TRIG_63_32_OFS 0x0180 -#define GIC_SH_TRIG_95_64_OFS 0x018c -#define GIC_SH_TRIG_127_96_OFS 0x0188 -#define GIC_SH_TRIG_159_128_OFS 0x0194 -#define GIC_SH_TRIG_191_160_OFS 0x0190 -#define GIC_SH_TRIG_223_192_OFS 0x019c -#define GIC_SH_TRIG_255_224_OFS 0x0198 - -/* Dual Edge Triggering */ -#define GIC_SH_DUAL_31_0_OFS 0x0204 -#define GIC_SH_DUAL_63_32_OFS 0x0200 -#define GIC_SH_DUAL_95_64_OFS 0x020c -#define GIC_SH_DUAL_127_96_OFS 0x0208 -#define GIC_SH_DUAL_159_128_OFS 0x0214 -#define GIC_SH_DUAL_191_160_OFS 0x0210 -#define GIC_SH_DUAL_223_192_OFS 0x021c -#define GIC_SH_DUAL_255_224_OFS 0x0218 - -/* Set/Clear corresponding bit in Edge Detect Register */ -#define GIC_SH_WEDGE_OFS 0x0280 - -/* Reset Mask - Disables Interrupt */ -#define GIC_SH_RMASK_31_0_OFS 0x0304 -#define GIC_SH_RMASK_63_32_OFS 0x0300 -#define GIC_SH_RMASK_95_64_OFS 0x030c -#define GIC_SH_RMASK_127_96_OFS 0x0308 -#define GIC_SH_RMASK_159_128_OFS 0x0314 -#define GIC_SH_RMASK_191_160_OFS 0x0310 -#define GIC_SH_RMASK_223_192_OFS 0x031c -#define GIC_SH_RMASK_255_224_OFS 0x0318 - -/* Set Mask (WO) - Enables Interrupt */ -#define GIC_SH_SMASK_31_0_OFS 0x0384 -#define GIC_SH_SMASK_63_32_OFS 0x0380 -#define GIC_SH_SMASK_95_64_OFS 0x038c -#define GIC_SH_SMASK_127_96_OFS 0x0388 -#define GIC_SH_SMASK_159_128_OFS 0x0394 -#define GIC_SH_SMASK_191_160_OFS 0x0390 -#define GIC_SH_SMASK_223_192_OFS 0x039c -#define GIC_SH_SMASK_255_224_OFS 0x0398 - -/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */ -#define GIC_SH_MASK_31_0_OFS 0x0404 -#define GIC_SH_MASK_63_32_OFS 0x0400 -#define GIC_SH_MASK_95_64_OFS 0x040c -#define GIC_SH_MASK_127_96_OFS 0x0408 -#define GIC_SH_MASK_159_128_OFS 0x0414 -#define GIC_SH_MASK_191_160_OFS 0x0410 -#define GIC_SH_MASK_223_192_OFS 0x041c -#define GIC_SH_MASK_255_224_OFS 0x0418 - -/* Pending Global Interrupts (RO) */ -#define GIC_SH_PEND_31_0_OFS 0x0484 -#define GIC_SH_PEND_63_32_OFS 0x0480 -#define GIC_SH_PEND_95_64_OFS 0x048c -#define GIC_SH_PEND_127_96_OFS 0x0488 -#define GIC_SH_PEND_159_128_OFS 0x0494 -#define GIC_SH_PEND_191_160_OFS 0x0490 -#define GIC_SH_PEND_223_192_OFS 0x049c -#define GIC_SH_PEND_255_224_OFS 0x0498 - -#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500 - -/* Maps Interrupt X to a Pin */ -#define GIC_SH_MAP_TO_PIN(intr) \ - (GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr)) - -#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2004 - -/* - * Maps Interrupt X to a VPE. This is more complex than the LE case, as - * odd and even registers need to be transposed. It does work - trust me! - */ -#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \ - (GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + \ - (((((vpe) / 32) ^ 1) - 1) * 4)) -#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32)) - -/* Polarity */ -#define GIC_SH_SET_POLARITY_OFS 0x0100 -#define GIC_SET_POLARITY(intr, pol) \ - GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (pol) << ((intr) % 32)) - -/* Triggering */ -#define GIC_SH_SET_TRIGGER_OFS 0x0180 -#define GIC_SET_TRIGGER(intr, trig) \ - GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (trig) << ((intr) % 32)) - -/* Mask manipulation */ -#define GIC_SH_SMASK_OFS 0x0380 -#define GIC_SET_INTR_MASK(intr, val) \ - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))) - -#define GIC_SH_RMASK_OFS 0x0300 -#define GIC_CLR_INTR_MASK(intr, val) \ - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))) - -/* Register Map for Local Section */ -#define GIC_VPE_CTL_OFS 0x0000 -#define GIC_VPE_PEND_OFS 0x0004 -#define GIC_VPE_MASK_OFS 0x0008 -#define GIC_VPE_RMASK_OFS 0x000c -#define GIC_VPE_SMASK_OFS 0x0010 -#define GIC_VPE_WD_MAP_OFS 0x0040 -#define GIC_VPE_COMPARE_MAP_OFS 0x0044 -#define GIC_VPE_TIMER_MAP_OFS 0x0048 -#define GIC_VPE_PERFCTR_MAP_OFS 0x0050 -#define GIC_VPE_SWINT0_MAP_OFS 0x0054 -#define GIC_VPE_SWINT1_MAP_OFS 0x0058 -#define GIC_VPE_OTHER_ADDR_OFS 0x0080 -#define GIC_VPE_WD_CONFIG0_OFS 0x0090 -#define GIC_VPE_WD_COUNT0_OFS 0x0094 -#define GIC_VPE_WD_INITIAL0_OFS 0x0098 -#define GIC_VPE_COMPARE_LO_OFS 0x00a4 -#define GIC_VPE_COMPARE_HI_OFS 0x00a0 - -#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100 -#define GIC_VPE_EIC_SS(intr) \ - (GIC_EIC_SHADOW_SET_BASE + (4 * intr)) - -#define GIC_VPE_EIC_VEC_BASE 0x0800 -#define GIC_VPE_EIC_VEC(intr) \ - (GIC_VPE_EIC_VEC_BASE + (4 * intr)) - -#define GIC_VPE_TENABLE_NMI_OFS 0x1000 -#define GIC_VPE_TENABLE_YQ_OFS 0x1004 -#define GIC_VPE_TENABLE_INT_31_0_OFS 0x1080 -#define GIC_VPE_TENABLE_INT_63_32_OFS 0x1084 - -/* User Mode Visible Section Register Map */ -#define GIC_UMV_SH_COUNTER_31_00_OFS 0x0004 -#define GIC_UMV_SH_COUNTER_63_32_OFS 0x0000 - -#endif /* !LE */ - /* Masks */ #define GIC_SH_CONFIG_COUNTSTOP_SHF 28 #define GIC_SH_CONFIG_COUNTSTOP_MSK (MSK(1) << GIC_SH_CONFIG_COUNTSTOP_SHF) @@ -473,12 +320,13 @@ struct gic_intrmask_regs { * in building ipi_map. */ struct gic_intr_map { - unsigned int intrnum; /* Ext Intr Num */ unsigned int cpunum; /* Directed to this CPU */ unsigned int pin; /* Directed to this Pin */ unsigned int polarity; /* Polarity : +/- */ unsigned int trigtype; /* Trigger : Edge/Levl */ - unsigned int ipiflag; /* Is used for IPI ? */ + unsigned int flags; /* Misc flags */ +#define GIC_FLAG_IPI 0x01 +#define GIC_FLAG_TRANSPARENT 0x02 }; extern void gic_init(unsigned long gic_base_addr, diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index d2072cd3859..b181f2f0ea8 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -14,38 +14,23 @@ static unsigned long _gic_base; -static unsigned int _irqbase, _mapsize, numvpes, numintrs; -static struct gic_intr_map *_intrmap; +static unsigned int _irqbase; +static unsigned int gic_irq_flags[GIC_NUM_INTRS]; +#define GIC_IRQ_FLAG_EDGE 0x0001 -static struct gic_pcpu_mask pcpu_masks[NR_CPUS]; +struct gic_pcpu_mask pcpu_masks[NR_CPUS]; static struct gic_pending_regs pending_regs[NR_CPUS]; static struct gic_intrmask_regs intrmask_regs[NR_CPUS]; -#define gic_wedgeb2bok 0 /* - * Can GIC handle b2b writes to wedge register? - */ -#if gic_wedgeb2bok == 0 -static DEFINE_SPINLOCK(gic_wedgeb2b_lock); -#endif - void gic_send_ipi(unsigned int intr) { -#if gic_wedgeb2bok == 0 - unsigned long flags; -#endif pr_debug("CPU%d: %s status %08x\n", smp_processor_id(), __func__, read_c0_status()); - if (!gic_wedgeb2bok) - spin_lock_irqsave(&gic_wedgeb2b_lock, flags); GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), 0x80000000 | intr); - if (!gic_wedgeb2bok) { - (void) GIC_REG(SHARED, GIC_SH_CONFIG); - spin_unlock_irqrestore(&gic_wedgeb2b_lock, flags); - } } /* This is Malta specific and needs to be exported */ -static void vpe_local_setup(unsigned int numvpes) +static void __init vpe_local_setup(unsigned int numvpes) { int i; unsigned long timer_interrupt = 5, perf_interrupt = 5; @@ -105,44 +90,34 @@ unsigned int gic_get_int(void) static unsigned int gic_irq_startup(unsigned int irq) { - pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GIC_SET_INTR_MASK(irq, 1); + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + GIC_SET_INTR_MASK(irq); return 0; } static void gic_irq_ack(unsigned int irq) { -#if gic_wedgeb2bok == 0 - unsigned long flags; -#endif - pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GIC_CLR_INTR_MASK(irq, 1); + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + GIC_CLR_INTR_MASK(irq); - if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) { - if (!gic_wedgeb2bok) - spin_lock_irqsave(&gic_wedgeb2b_lock, flags); + if (gic_irq_flags[irq] & GIC_IRQ_FLAG_EDGE) GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq); - if (!gic_wedgeb2bok) { - (void) GIC_REG(SHARED, GIC_SH_CONFIG); - spin_unlock_irqrestore(&gic_wedgeb2b_lock, flags); - } - } } static void gic_mask_irq(unsigned int irq) { - pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GIC_CLR_INTR_MASK(irq, 1); + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + GIC_CLR_INTR_MASK(irq); } static void gic_unmask_irq(unsigned int irq) { - pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); irq -= _irqbase; - GIC_SET_INTR_MASK(irq, 1); + pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq); + GIC_SET_INTR_MASK(irq); } #ifdef CONFIG_SMP @@ -155,9 +130,8 @@ static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) unsigned long flags; int i; - pr_debug(KERN_DEBUG "%s called\n", __func__); irq -= _irqbase; - + pr_debug(KERN_DEBUG "%s(%d) called\n", __func__, irq); cpumask_and(&tmp, cpumask, cpu_online_mask); if (cpus_empty(tmp)) return -1; @@ -168,13 +142,6 @@ static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) /* Re-route this IRQ */ GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp)); - /* - * FIXME: assumption that _intrmap is ordered and has no holes - */ - - /* Update the intr_map */ - _intrmap[irq].cpunum = first_cpu(tmp); - /* Update the pcpu_masks */ for (i = 0; i < NR_CPUS; i++) clear_bit(irq, pcpu_masks[i].pcpu_mask); @@ -201,8 +168,9 @@ static struct irq_chip gic_irq_controller = { #endif }; -static void __init setup_intr(unsigned int intr, unsigned int cpu, - unsigned int pin, unsigned int polarity, unsigned int trigtype) +static void __init gic_setup_intr(unsigned int intr, unsigned int cpu, + unsigned int pin, unsigned int polarity, unsigned int trigtype, + unsigned int flags) { /* Setup Intr to Pin mapping */ if (pin & GIC_MAP_TO_NMI_MSK) { @@ -227,38 +195,43 @@ static void __init setup_intr(unsigned int intr, unsigned int cpu, GIC_SET_TRIGGER(intr, trigtype); /* Init Intr Masks */ - GIC_SET_INTR_MASK(intr, 0); + GIC_CLR_INTR_MASK(intr); + /* Initialise per-cpu Interrupt software masks */ + if (flags & GIC_FLAG_IPI) + set_bit(intr, pcpu_masks[cpu].pcpu_mask); + if (flags & GIC_FLAG_TRANSPARENT) + GIC_SET_INTR_MASK(intr); + if (trigtype == GIC_TRIG_EDGE) + gic_irq_flags[intr] |= GIC_IRQ_FLAG_EDGE; } -static void __init gic_basic_init(void) +static void __init gic_basic_init(int numintrs, int numvpes, + struct gic_intr_map *intrmap, int mapsize) { unsigned int i, cpu; /* Setup defaults */ - for (i = 0; i < GIC_NUM_INTRS; i++) { + for (i = 0; i < numintrs; i++) { GIC_SET_POLARITY(i, GIC_POL_POS); GIC_SET_TRIGGER(i, GIC_TRIG_LEVEL); - GIC_SET_INTR_MASK(i, 0); + GIC_CLR_INTR_MASK(i); + if (i < GIC_NUM_INTRS) + gic_irq_flags[i] = 0; } /* Setup specifics */ - for (i = 0; i < _mapsize; i++) { - cpu = _intrmap[i].cpunum; + for (i = 0; i < mapsize; i++) { + cpu = intrmap[i].cpunum; if (cpu == X) continue; - - if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 && - _intrmap[i].ipiflag == 0) + if (cpu == 0 && i != 0 && intrmap[i].flags == 0) continue; - - setup_intr(_intrmap[i].intrnum, - _intrmap[i].cpunum, - _intrmap[i].pin, - _intrmap[i].polarity, - _intrmap[i].trigtype); - /* Initialise per-cpu Interrupt software masks */ - if (_intrmap[i].ipiflag) - set_bit(_intrmap[i].intrnum, pcpu_masks[cpu].pcpu_mask); + gic_setup_intr(i, + intrmap[i].cpunum, + intrmap[i].pin, + intrmap[i].polarity, + intrmap[i].trigtype, + intrmap[i].flags); } vpe_local_setup(numvpes); @@ -273,12 +246,11 @@ void __init gic_init(unsigned long gic_base_addr, unsigned int irqbase) { unsigned int gicconfig; + int numvpes, numintrs; _gic_base = (unsigned long) ioremap_nocache(gic_base_addr, gic_addrspace_size); _irqbase = irqbase; - _intrmap = intr_map; - _mapsize = intr_map_size; GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), gicconfig); numintrs = (gicconfig & GIC_SH_CONFIG_NUMINTRS_MSK) >> @@ -290,5 +262,5 @@ void __init gic_init(unsigned long gic_base_addr, pr_debug("%s called\n", __func__); - gic_basic_init(); + gic_basic_init(numintrs, numvpes, intr_map, intr_map_size); } diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index e568d0da060..377a925e8cc 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -379,32 +379,32 @@ static msc_irqmap_t __initdata msc_eicirqmap[] = { static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap); -#if defined(CONFIG_MIPS_MT_SMP) /* * This GIC specific tabular array defines the association between External * Interrupts and CPUs/Core Interrupts. The nature of the External * Interrupts is also defined here - polarity/trigger. */ + +#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { - { GIC_EXT_INTR(0), X, X, X, X, 0 }, - { GIC_EXT_INTR(1), X, X, X, X, 0 }, - { GIC_EXT_INTR(2), X, X, X, X, 0 }, - { GIC_EXT_INTR(3), 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(4), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(5), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(6), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(7), 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(8), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(9), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(10), X, X, X, X, 0 }, - { GIC_EXT_INTR(11), X, X, X, X, 0 }, - { GIC_EXT_INTR(12), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 }, - { GIC_EXT_INTR(15), X, X, X, X, 0 }, -/* This is the end of the general interrupts now we do IPI ones */ + { X, X, X, X, 0 }, + { X, X, X, X, 0 }, + { X, X, X, X, 0 }, + { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { X, X, X, X, 0 }, + { X, X, X, X, 0 }, + { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, + { X, X, X, X, 0 }, + /* The remainder of this table is initialised by fill_ipi_map */ }; -#endif /* * GCMP needs to be detected before any SMP initialisation @@ -419,20 +419,35 @@ int __init gcmp_probe(unsigned long addr, unsigned long size) gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR; if (gcmp_present) - printk(KERN_DEBUG "GCMP present\n"); + pr_debug("GCMP present\n"); return gcmp_present; } +/* Return the number of IOCU's present */ +int __init gcmp_niocu(void) +{ + return gcmp_present ? + (GCMPGCB(GC) & GCMP_GCB_GC_NUMIOCU_MSK) >> GCMP_GCB_GC_NUMIOCU_SHF : + 0; +} + +/* Set GCMP region attributes */ +void __init gcmp_setregion(int region, unsigned long base, + unsigned long mask, int type) +{ + GCMPGCBn(CMxBASE, region) = base; + GCMPGCBn(CMxMASK, region) = mask | type; +} + #if defined(CONFIG_MIPS_MT_SMP) static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin) { int intr = baseintr + cpu; - gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr); gic_intr_map[intr].cpunum = cpu; gic_intr_map[intr].pin = cpupin; gic_intr_map[intr].polarity = GIC_POL_POS; gic_intr_map[intr].trigtype = GIC_TRIG_EDGE; - gic_intr_map[intr].ipiflag = 1; + gic_intr_map[intr].flags = GIC_FLAG_IPI; ipi_map[cpu] |= (1 << (cpupin + 2)); } @@ -447,6 +462,12 @@ static void __init fill_ipi_map(void) } #endif +void __init arch_init_ipiirq(int irq, struct irqaction *action) +{ + setup_irq(irq, action); + set_irq_handler(irq, handle_percpu_irq); +} + void __init arch_init_irq(void) { init_i8259_irqs(); @@ -463,7 +484,7 @@ void __init arch_init_irq(void) MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF; } if (gic_present) - printk(KERN_DEBUG "GIC present\n"); + pr_debug("GIC present\n"); switch (mips_revision_sconid) { case MIPS_REVISION_SCON_SOCIT: @@ -526,16 +547,16 @@ void __init arch_init_irq(void) &corehi_irqaction); } -#if defined(CONFIG_MIPS_MT_SMP) if (gic_present) { /* FIXME */ int i; - +#if defined(CONFIG_MIPS_MT_SMP) gic_call_int_base = GIC_NUM_INTRS - NR_CPUS; gic_resched_int_base = gic_call_int_base - NR_CPUS; - fill_ipi_map(); - gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); +#endif + gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, + ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); if (!gcmp_present) { /* Enable the GIC */ i = REG(_msc01_biu_base, MSC01_SC_CFG); @@ -543,7 +564,7 @@ void __init arch_init_irq(void) (i | (0x1 << MSC01_SC_CFG_GICENA_SHF)); pr_debug("GIC Enabled\n"); } - +#if defined(CONFIG_MIPS_MT_SMP) /* set up ipi interrupts */ if (cpu_has_vint) { set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch); @@ -556,16 +577,14 @@ void __init arch_init_irq(void) write_c0_status(0x1100dc00); printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status()); for (i = 0; i < NR_CPUS; i++) { - setup_irq(MIPS_GIC_IRQ_BASE + - GIC_RESCHED_INT(i), &irq_resched); - setup_irq(MIPS_GIC_IRQ_BASE + - GIC_CALL_INT(i), &irq_call); - set_irq_handler(MIPS_GIC_IRQ_BASE + - GIC_RESCHED_INT(i), handle_percpu_irq); - set_irq_handler(MIPS_GIC_IRQ_BASE + - GIC_CALL_INT(i), handle_percpu_irq); + arch_init_ipiirq(MIPS_GIC_IRQ_BASE + + GIC_RESCHED_INT(i), &irq_resched); + arch_init_ipiirq(MIPS_GIC_IRQ_BASE + + GIC_CALL_INT(i), &irq_call); } +#endif } else { +#if defined(CONFIG_MIPS_MT_SMP) /* set up ipi interrupts */ if (cpu_has_veic) { set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch); @@ -580,14 +599,10 @@ void __init arch_init_irq(void) cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ; cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ; } - - setup_irq(cpu_ipi_resched_irq, &irq_resched); - setup_irq(cpu_ipi_call_irq, &irq_call); - - set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq); - set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq); - } + arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched); + arch_init_ipiirq(cpu_ipi_call_irq, &irq_call); #endif + } } void malta_be_init(void) diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index efdb4f66ffc..2fbfa1a8c3a 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -27,7 +27,7 @@ #include #include - +#include #include #include #include @@ -201,7 +201,11 @@ void __init mips_pcibios_init(void) msc_mem_resource.start = start & mask; msc_mem_resource.end = (start & mask) | ~mask; msc_controller.mem_offset = (start & mask) - (map & mask); - +#ifdef CONFIG_MIPS_CMP + if (gcmp_niocu()) + gcmp_setregion(0, start, mask, + GCMP_GCB_GCMPB_CMDEFTGT_IOCU1); +#endif MSC_READ(MSC01_PCI_SC2PIOBASL, start); MSC_READ(MSC01_PCI_SC2PIOMSKL, mask); MSC_READ(MSC01_PCI_SC2PIOMAPL, map); @@ -209,7 +213,11 @@ void __init mips_pcibios_init(void) msc_io_resource.end = (map & mask) | ~mask; msc_controller.io_offset = 0; ioport_resource.end = ~mask; - +#ifdef CONFIG_MIPS_CMP + if (gcmp_niocu()) + gcmp_setregion(1, start, mask, + GCMP_GCB_GCMPB_CMDEFTGT_IOCU1); +#endif /* If ranges overlap I/O takes precedence. */ start = start & mask; end = start | ~mask; -- GitLab From 05cf20790b3b3ed81cb001e8f41e473247f28302 Mon Sep 17 00:00:00 2001 From: Jaidev Patwardhan Date: Fri, 10 Jul 2009 01:54:25 -0700 Subject: [PATCH 0453/1165] MIPS: GCMP: Avoid accessing registers when they are not present Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/mti-malta/malta-int.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 377a925e8cc..4c3fca18a17 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -411,6 +411,11 @@ static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { */ int __init gcmp_probe(unsigned long addr, unsigned long size) { + if (mips_revision_sconid != MIPS_REVISION_SCON_ROCIT) { + gcmp_present = 0; + return gcmp_present; + } + if (gcmp_present >= 0) return gcmp_present; @@ -479,9 +484,14 @@ void __init arch_init_irq(void) GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK; gic_present = 1; } else { - _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ); - gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) & - MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF; + if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) { + _msc01_biu_base = (unsigned long) + ioremap_nocache(MSC01_BIU_REG_BASE, + MSC01_BIU_ADDRSPACE_SZ); + gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) & + MSC01_SC_CFG_GICPRES_MSK) >> + MSC01_SC_CFG_GICPRES_SHF; + } } if (gic_present) pr_debug("GIC present\n"); -- GitLab From 2e41f91d9e90e34254746fefcb7bb678a3c9d541 Mon Sep 17 00:00:00 2001 From: Jaidev Patwardhan Date: Fri, 10 Jul 2009 02:06:00 -0700 Subject: [PATCH 0454/1165] MIPS: SMTC: Avoid queing multiple reschedule IPIs Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/include/asm/smtc_ipi.h | 1 + arch/mips/kernel/smtc.c | 34 ++++++++++++++++++++++++++++---- 2 files changed, 31 insertions(+), 4 deletions(-) diff --git a/arch/mips/include/asm/smtc_ipi.h b/arch/mips/include/asm/smtc_ipi.h index 8ce51757434..15278dbd7e7 100644 --- a/arch/mips/include/asm/smtc_ipi.h +++ b/arch/mips/include/asm/smtc_ipi.h @@ -45,6 +45,7 @@ struct smtc_ipi_q { spinlock_t lock; struct smtc_ipi *tail; int depth; + int resched_flag; /* reschedule already queued */ }; static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p) diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index 4d181df44a4..24630fd8ef6 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -75,7 +75,6 @@ unsigned long irq_hwmask[NR_IRQS]; asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS]; - /* * Number of InterProcessor Interrupt (IPI) message buffers to allocate */ @@ -388,6 +387,7 @@ void smtc_prepare_cpus(int cpus) IPIQ[i].head = IPIQ[i].tail = NULL; spin_lock_init(&IPIQ[i].lock); IPIQ[i].depth = 0; + IPIQ[i].resched_flag = 0; /* No reschedules queued initially */ } /* cpu_data index starts at zero */ @@ -741,11 +741,24 @@ void smtc_forward_irq(unsigned int irq) static void smtc_ipi_qdump(void) { int i; + struct smtc_ipi *temp; for (i = 0; i < NR_CPUS ;i++) { - printk("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n", + pr_info("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n", i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail, IPIQ[i].depth); + temp = IPIQ[i].head; + + while (temp != IPIQ[i].tail) { + pr_debug("%d %d %d: ", temp->type, temp->dest, + (int)temp->arg); +#ifdef SMTC_IPI_DEBUG + pr_debug("%u %lu\n", temp->sender, temp->stamp); +#else + pr_debug("\n"); +#endif + temp = temp->flink; + } } } @@ -784,11 +797,16 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) int mtflags; unsigned long tcrestart; extern void r4k_wait_irqoff(void), __pastwait(void); + int set_resched_flag = (type == LINUX_SMP_IPI && + action == SMP_RESCHEDULE_YOURSELF); if (cpu == smp_processor_id()) { printk("Cannot Send IPI to self!\n"); return; } + if (set_resched_flag && IPIQ[cpu].resched_flag != 0) + return; /* There is a reschedule queued already */ + /* Set up a descriptor, to be delivered either promptly or queued */ pipi = smtc_ipi_dq(&freeIPIq); if (pipi == NULL) { @@ -801,6 +819,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) pipi->dest = cpu; if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) { /* If not on same VPE, enqueue and send cross-VPE interrupt */ + IPIQ[cpu].resched_flag |= set_resched_flag; smtc_ipi_nq(&IPIQ[cpu], pipi); LOCK_CORE_PRA(); settc(cpu_data[cpu].tc_id); @@ -847,6 +866,7 @@ void smtc_send_ipi(int cpu, int type, unsigned int action) */ write_tc_c0_tchalt(0); UNLOCK_CORE_PRA(); + IPIQ[cpu].resched_flag |= set_resched_flag; smtc_ipi_nq(&IPIQ[cpu], pipi); } else { postdirect: @@ -996,12 +1016,15 @@ void deferred_smtc_ipi(void) * already enabled. */ local_irq_save(flags); - spin_lock(&q->lock); pipi = __smtc_ipi_dq(q); spin_unlock(&q->lock); - if (pipi != NULL) + if (pipi != NULL) { + if (pipi->type == LINUX_SMP_IPI && + (int)pipi->arg == SMP_RESCHEDULE_YOURSELF) + IPIQ[cpu].resched_flag = 0; ipi_decode(pipi); + } /* * The use of the __raw_local restore isn't * as obviously necessary here as in smtc_ipi_replay(), @@ -1082,6 +1105,9 @@ static irqreturn_t ipi_interrupt(int irq, void *dev_idm) * with interrupts off */ local_irq_save(flags); + if (pipi->type == LINUX_SMP_IPI && + (int)pipi->arg == SMP_RESCHEDULE_YOURSELF) + IPIQ[cpu].resched_flag = 0; ipi_decode(pipi); local_irq_restore(flags); } -- GitLab From 0db2b74e9150651a25ffd2e2285575ce193f763c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Oct 2009 16:54:01 +0200 Subject: [PATCH 0455/1165] MIPS: Set S-cache linesize to 64-bytes for MTI's S-cache Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 7159495ee0b..03bd56a2fb6 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1013,6 +1013,7 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL + default "6" if MIPS_CPU_SCACHE default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON default "5" -- GitLab From b6b74d5490c3ad88de503e0c5d44e4820b79b678 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 13 Oct 2009 08:52:28 -0700 Subject: [PATCH 0456/1165] MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity Since the locks are used from interrupt context we need the irqsave/irqrestore versions of the locking functions. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/octeon-irq.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 384f1842bfb..0bda5c5db15 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -182,9 +182,10 @@ static void octeon_irq_ciu0_disable(unsigned int irq) static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest) { int cpu; + unsigned long flags; int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */ - write_lock(&octeon_irq_ciu0_rwlock); + write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags); for_each_online_cpu(cpu) { int coreid = cpu_logical_map(cpu); uint64_t en0 = @@ -200,7 +201,7 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask * * of them are done. */ cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2)); - write_unlock(&octeon_irq_ciu0_rwlock); + write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags); return 0; } @@ -299,9 +300,10 @@ static void octeon_irq_ciu1_disable(unsigned int irq) static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest) { int cpu; + unsigned long flags; int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */ - write_lock(&octeon_irq_ciu1_rwlock); + write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags); for_each_online_cpu(cpu) { int coreid = cpu_logical_map(cpu); uint64_t en1 = @@ -318,7 +320,7 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask * * of them are done. */ cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1)); - write_unlock(&octeon_irq_ciu1_rwlock); + write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags); return 0; } -- GitLab From cd847b7857b835f9730d6fc93c3f423fcacc50f7 Mon Sep 17 00:00:00 2001 From: David Daney Date: Tue, 13 Oct 2009 11:26:03 -0700 Subject: [PATCH 0457/1165] MIPS: Octeon: Use lockless interrupt controller operations when possible. Some newer Octeon chips have registers that allow lockless operation of the interrupt controller. Take advantage of them. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/octeon-irq.c | 214 ++++++++++++++++++++++----- 1 file changed, 178 insertions(+), 36 deletions(-) diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 0bda5c5db15..6f2acf09328 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -17,6 +17,15 @@ DEFINE_RWLOCK(octeon_irq_ciu0_rwlock); DEFINE_RWLOCK(octeon_irq_ciu1_rwlock); DEFINE_SPINLOCK(octeon_irq_msi_lock); +static int octeon_coreid_for_cpu(int cpu) +{ +#ifdef CONFIG_SMP + return cpu_logical_map(cpu); +#else + return cvmx_get_core_num(); +#endif +} + static void octeon_irq_core_ack(unsigned int irq) { unsigned int bit = irq - OCTEON_IRQ_SW0; @@ -152,11 +161,10 @@ static void octeon_irq_ciu0_disable(unsigned int irq) int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */ unsigned long flags; uint64_t en0; -#ifdef CONFIG_SMP int cpu; write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags); for_each_online_cpu(cpu) { - int coreid = cpu_logical_map(cpu); + int coreid = octeon_coreid_for_cpu(cpu); en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); en0 &= ~(1ull << bit); cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0); @@ -167,15 +175,45 @@ static void octeon_irq_ciu0_disable(unsigned int irq) */ cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2)); write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags); -#else - int coreid = cvmx_get_core_num(); - local_irq_save(flags); - en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); - en0 &= ~(1ull << bit); - cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0); - cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); - local_irq_restore(flags); -#endif +} + +/* + * Enable the irq on the current core for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu0_enable_v2(unsigned int irq) +{ + int index = cvmx_get_core_num() * 2; + u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); + + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask); +} + +/* + * Disable the irq on the current core for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu0_disable_v2(unsigned int irq) +{ + int index = cvmx_get_core_num() * 2; + u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); + + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask); +} + +/* + * Disable the irq on the all cores for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu0_disable_all_v2(unsigned int irq) +{ + u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); + int index; + int cpu; + for_each_online_cpu(cpu) { + index = octeon_coreid_for_cpu(cpu) * 2; + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask); + } } #ifdef CONFIG_SMP @@ -187,7 +225,7 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask * write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags); for_each_online_cpu(cpu) { - int coreid = cpu_logical_map(cpu); + int coreid = octeon_coreid_for_cpu(cpu); uint64_t en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); if (cpumask_test_cpu(cpu, dest)) @@ -205,8 +243,42 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask * return 0; } + +/* + * Set affinity for the irq for chips that have the EN*_W1{S,C} + * registers. + */ +static int octeon_irq_ciu0_set_affinity_v2(unsigned int irq, + const struct cpumask *dest) +{ + int cpu; + int index; + u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); + for_each_online_cpu(cpu) { + index = octeon_coreid_for_cpu(cpu) * 2; + if (cpumask_test_cpu(cpu, dest)) + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask); + else + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask); + } + return 0; +} #endif +/* + * Newer octeon chips have support for lockless CIU operation. + */ +static struct irq_chip octeon_irq_chip_ciu0_v2 = { + .name = "CIU0", + .enable = octeon_irq_ciu0_enable_v2, + .disable = octeon_irq_ciu0_disable_all_v2, + .ack = octeon_irq_ciu0_disable_v2, + .eoi = octeon_irq_ciu0_enable_v2, +#ifdef CONFIG_SMP + .set_affinity = octeon_irq_ciu0_set_affinity_v2, +#endif +}; + static struct irq_chip octeon_irq_chip_ciu0 = { .name = "CIU0", .enable = octeon_irq_ciu0_enable, @@ -270,11 +342,10 @@ static void octeon_irq_ciu1_disable(unsigned int irq) int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */ unsigned long flags; uint64_t en1; -#ifdef CONFIG_SMP int cpu; write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags); for_each_online_cpu(cpu) { - int coreid = cpu_logical_map(cpu); + int coreid = octeon_coreid_for_cpu(cpu); en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)); en1 &= ~(1ull << bit); cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1); @@ -285,19 +356,50 @@ static void octeon_irq_ciu1_disable(unsigned int irq) */ cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1)); write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags); -#else - int coreid = cvmx_get_core_num(); - local_irq_save(flags); - en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)); - en1 &= ~(1ull << bit); - cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1); - cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)); - local_irq_restore(flags); -#endif +} + +/* + * Enable the irq on the current core for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu1_enable_v2(unsigned int irq) +{ + int index = cvmx_get_core_num() * 2 + 1; + u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0); + + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask); +} + +/* + * Disable the irq on the current core for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu1_disable_v2(unsigned int irq) +{ + int index = cvmx_get_core_num() * 2 + 1; + u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0); + + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask); +} + +/* + * Disable the irq on the all cores for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu1_disable_all_v2(unsigned int irq) +{ + u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0); + int index; + int cpu; + for_each_online_cpu(cpu) { + index = octeon_coreid_for_cpu(cpu) * 2 + 1; + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask); + } } #ifdef CONFIG_SMP -static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest) +static int octeon_irq_ciu1_set_affinity(unsigned int irq, + const struct cpumask *dest) { int cpu; unsigned long flags; @@ -305,7 +407,7 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask * write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags); for_each_online_cpu(cpu) { - int coreid = cpu_logical_map(cpu); + int coreid = octeon_coreid_for_cpu(cpu); uint64_t en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1 (coreid * 2 + 1)); @@ -324,8 +426,42 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask * return 0; } + +/* + * Set affinity for the irq for chips that have the EN*_W1{S,C} + * registers. + */ +static int octeon_irq_ciu1_set_affinity_v2(unsigned int irq, + const struct cpumask *dest) +{ + int cpu; + int index; + u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0); + for_each_online_cpu(cpu) { + index = octeon_coreid_for_cpu(cpu) * 2 + 1; + if (cpumask_test_cpu(cpu, dest)) + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask); + else + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask); + } + return 0; +} #endif +/* + * Newer octeon chips have support for lockless CIU operation. + */ +static struct irq_chip octeon_irq_chip_ciu1_v2 = { + .name = "CIU0", + .enable = octeon_irq_ciu1_enable_v2, + .disable = octeon_irq_ciu1_disable_all_v2, + .ack = octeon_irq_ciu1_disable_v2, + .eoi = octeon_irq_ciu1_enable_v2, +#ifdef CONFIG_SMP + .set_affinity = octeon_irq_ciu1_set_affinity_v2, +#endif +}; + static struct irq_chip octeon_irq_chip_ciu1 = { .name = "CIU1", .enable = octeon_irq_ciu1_enable, @@ -422,6 +558,8 @@ static struct irq_chip octeon_irq_chip_msi = { void __init arch_init_irq(void) { int irq; + struct irq_chip *chip0; + struct irq_chip *chip1; #ifdef CONFIG_SMP /* Set the default affinity to the boot cpu. */ @@ -432,6 +570,16 @@ void __init arch_init_irq(void) if (NR_IRQS < OCTEON_IRQ_LAST) pr_err("octeon_irq_init: NR_IRQS is set too low\n"); + if (OCTEON_IS_MODEL(OCTEON_CN58XX_PASS2_X) || + OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) || + OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X)) { + chip0 = &octeon_irq_chip_ciu0_v2; + chip1 = &octeon_irq_chip_ciu1_v2; + } else { + chip0 = &octeon_irq_chip_ciu0; + chip1 = &octeon_irq_chip_ciu1; + } + /* 0 - 15 reserved for i8259 master and slave controller. */ /* 17 - 23 Mips internal */ @@ -442,14 +590,12 @@ void __init arch_init_irq(void) /* 24 - 87 CIU_INT_SUM0 */ for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) { - set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu0, - handle_percpu_irq); + set_irq_chip_and_handler(irq, chip0, handle_percpu_irq); } /* 88 - 151 CIU_INT_SUM1 */ for (irq = OCTEON_IRQ_WDOG0; irq <= OCTEON_IRQ_RESERVED151; irq++) { - set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu1, - handle_percpu_irq); + set_irq_chip_and_handler(irq, chip1, handle_percpu_irq); } #ifdef CONFIG_PCI_MSI @@ -507,14 +653,10 @@ asmlinkage void plat_irq_dispatch(void) #ifdef CONFIG_HOTPLUG_CPU static int is_irq_enabled_on_cpu(unsigned int irq, unsigned int cpu) { - unsigned int isset; -#ifdef CONFIG_SMP - int coreid = cpu_logical_map(cpu); -#else - int coreid = cvmx_get_core_num(); -#endif + unsigned int isset; + int coreid = octeon_coreid_for_cpu(cpu); int bit = (irq < OCTEON_IRQ_WDOG0) ? - irq - OCTEON_IRQ_WORKQ0 : irq - OCTEON_IRQ_WDOG0; + irq - OCTEON_IRQ_WORKQ0 : irq - OCTEON_IRQ_WDOG0; if (irq < 64) { isset = (cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)) & (1ull << bit)) >> bit; -- GitLab From c2ea1d56eaf084c66177eb5658ff4065e79b36ea Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 13 Oct 2009 23:23:28 +0200 Subject: [PATCH 0458/1165] MIPS: Avoid potential hazard on Context register set_saved_sp reads Context register. Avoid reading stale value from earlier incomplete write. Issue found and fixed for head.S by Chris Dearman . Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mmu_context.h | 3 +++ arch/mips/kernel/head.S | 1 + 2 files changed, 4 insertions(+) diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index ed331c2e488..6083db58650 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -16,6 +16,7 @@ #include #include #include +#include #include #ifdef CONFIG_MIPS_MT_SMTC #include @@ -36,11 +37,13 @@ extern unsigned long pgd_current[]; #ifdef CONFIG_32BIT #define TLBMISS_HANDLER_SETUP() \ write_c0_context((unsigned long) smp_processor_id() << 25); \ + back_to_back_c0_hazard(); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif #ifdef CONFIG_64BIT #define TLBMISS_HANDLER_SETUP() \ write_c0_context((unsigned long) smp_processor_id() << 26); \ + back_to_back_c0_hazard(); \ TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir) #endif diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 531ce7b1612..ea695d9605e 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -191,6 +191,7 @@ NESTED(kernel_entry, 16, sp) # kernel entry point /* Set the SP after an empty pt_regs. */ PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE PTR_ADDU sp, $28 + back_to_back_c0_hazard set_saved_sp sp, t0, t1 PTR_SUBU sp, 4 * SZREG # init stack pointer -- GitLab From e8d4c342e5cfecb8080c181e881deb35ef99806d Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Fri, 19 Jun 2009 18:01:39 +0800 Subject: [PATCH 0459/1165] MIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store Loongson 2 does not have dcache aliases when is using 16k pages. and the And because Loongson 2 doesn't do SMP , cpu_icache_snoops_remote_store does not matter here. Signed-off-by: Zhang Le Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h index ce5b6e270e3..9947e57c91d 100644 --- a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h @@ -29,7 +29,7 @@ #define cpu_has_cache_cdex_p 0 #define cpu_has_cache_cdex_s 0 #define cpu_has_counter 1 -#define cpu_has_dc_aliases 1 +#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000) #define cpu_has_divec 0 #define cpu_has_dsp 0 #define cpu_has_ejtag 0 @@ -54,6 +54,5 @@ #define cpu_has_vce 0 #define cpu_has_vtag_icache 0 #define cpu_has_watch 1 -#define cpu_icache_snoops_remote_store 1 #endif /* __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H */ -- GitLab From 2b5b9b786c177fa4bca1646325a1dd98c4399523 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 14 Oct 2009 09:56:00 +0200 Subject: [PATCH 0460/1165] MIPS: bcm63xx: Set the correct BCM3302 CPU name For consistency with other BCM63xx SoC set the CPU name to "Broadcom BCM6338" when actually running on that system. Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle --- arch/mips/bcm63xx/cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c index 6dc43f0483e..70378bb5e3f 100644 --- a/arch/mips/bcm63xx/cpu.c +++ b/arch/mips/bcm63xx/cpu.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -284,6 +285,7 @@ void __init bcm63xx_cpu_init(void) { unsigned int tmp, expected_cpu_id; struct cpuinfo_mips *c = ¤t_cpu_data; + unsigned int cpu = smp_processor_id(); /* soc registers location depends on cpu type */ expected_cpu_id = 0; @@ -293,6 +295,7 @@ void __init bcm63xx_cpu_init(void) * BCM6338 as the same PrId as BCM3302 see arch/mips/kernel/cpu-probe.c */ case CPU_BCM3302: + __cpu_name[cpu] = "Broadcom BCM6338"; expected_cpu_id = BCM6338_CPU_ID; bcm63xx_regs_base = bcm96338_regs_base; bcm63xx_irqs = bcm96338_irqs; -- GitLab From fcc152f3bf55cec61167b173774cbf717b0ff5e4 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 3 Sep 2009 22:59:00 +0900 Subject: [PATCH 0461/1165] MIPS: TXx9: Fix spi-baseclk value TXx9 SPI bit rate is calculated by: fBR = fSPI / 2 / (n + 1) (fSPI is SPI master clock freq, i.e. imbusclk freq.) So use imbus_clk / 2 as a spi-baseclk. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/txx9/generic/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index dfe4720ac82..e10184c1b3e 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -85,7 +85,7 @@ int txx9_ccfg_toeon __initdata = 1; struct clk *clk_get(struct device *dev, const char *id) { if (!strcmp(id, "spi-baseclk")) - return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 4); + return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 2); if (!strcmp(id, "imbus_clk")) return (struct clk *)((unsigned long)txx9_gbus_clock / 2); return ERR_PTR(-ENOENT); -- GitLab From 44f2c586a3553154bc6549eb696c7716c85f910b Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 14 Oct 2009 12:22:20 +0200 Subject: [PATCH 0462/1165] MIPS: Alchemy: Fix hang with high-frequency edge interrupts The handle_edge_irq() flowhandler disables edge int sources which occur too fast (i.e. another edge comes in before the irq handler function had a chance to finish). Currently, the mask_ack() callback does not ack the edges in hardware, leading to an endless loop in the flowhandler where it tries to shut up the irq source. When I rewrote the alchemy IRQ code I wrongly assumed the mask_ack() callback was only used by the level flowhandler, hence it omitted the (at the time pointless) edge acks. Turned out I was wrong; so here is a complete mask_ack implementation for Alchemy IC, which fixes the above mentioned problem. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle --- arch/mips/alchemy/common/irq.c | 34 ++++++++++++++++++++++++++-------- 1 file changed, 26 insertions(+), 8 deletions(-) diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index c88c821b4c3..d670928afcf 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -354,6 +354,28 @@ static void au1x_ic1_ack(unsigned int irq_nr) au_sync(); } +static void au1x_ic0_maskack(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE; + + au_writel(1 << bit, IC0_WAKECLR); + au_writel(1 << bit, IC0_MASKCLR); + au_writel(1 << bit, IC0_RISINGCLR); + au_writel(1 << bit, IC0_FALLINGCLR); + au_sync(); +} + +static void au1x_ic1_maskack(unsigned int irq_nr) +{ + unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE; + + au_writel(1 << bit, IC1_WAKECLR); + au_writel(1 << bit, IC1_MASKCLR); + au_writel(1 << bit, IC1_RISINGCLR); + au_writel(1 << bit, IC1_FALLINGCLR); + au_sync(); +} + static int au1x_ic1_setwake(unsigned int irq, unsigned int on) { unsigned int bit = irq - AU1000_INTC1_INT_BASE; @@ -379,25 +401,21 @@ static int au1x_ic1_setwake(unsigned int irq, unsigned int on) /* * irq_chips for both ICs; this way the mask handlers can be * as short as possible. - * - * NOTE: the ->ack() callback is used by the handle_edge_irq - * flowhandler only, the ->mask_ack() one by handle_level_irq, - * so no need for an irq_chip for each type of irq (level/edge). */ static struct irq_chip au1x_ic0_chip = { .name = "Alchemy-IC0", - .ack = au1x_ic0_ack, /* edge */ + .ack = au1x_ic0_ack, .mask = au1x_ic0_mask, - .mask_ack = au1x_ic0_mask, /* level */ + .mask_ack = au1x_ic0_maskack, .unmask = au1x_ic0_unmask, .set_type = au1x_ic_settype, }; static struct irq_chip au1x_ic1_chip = { .name = "Alchemy-IC1", - .ack = au1x_ic1_ack, /* edge */ + .ack = au1x_ic1_ack, .mask = au1x_ic1_mask, - .mask_ack = au1x_ic1_mask, /* level */ + .mask_ack = au1x_ic1_maskack, .unmask = au1x_ic1_unmask, .set_type = au1x_ic_settype, .set_wake = au1x_ic1_setwake, -- GitLab From 55f4e1d4fe88f16f773ba5bb31ce8c1ae63724af Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Wed, 21 Oct 2009 22:51:46 +0800 Subject: [PATCH 0463/1165] MIPS: Oprofile: Rename cpu_type from godson2 to loongson2 Unify the naming method between kernel and the user-space oprofile tool. Because loongson is used instead of godson in most of the places, we agreed to use loongson instead, which will simplify future maintenance. Signed-off-by: Wu Zhangjin Acked-by: Robert Richter Signed-off-by: Ralf Baechle --- arch/mips/oprofile/op_model_loongson2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c index deed1d5d498..575cd147347 100644 --- a/arch/mips/oprofile/op_model_loongson2.c +++ b/arch/mips/oprofile/op_model_loongson2.c @@ -22,7 +22,7 @@ * otherwise, the oprofile tool will not recognize this and complain about * "cpu_type 'unset' is not valid". */ -#define LOONGSON2_CPU_TYPE "mips/godson2" +#define LOONGSON2_CPU_TYPE "mips/loongson2" #define LOONGSON2_COUNTER1_EVENT(event) ((event & 0x0f) << 5) #define LOONGSON2_COUNTER2_EVENT(event) ((event & 0x0f) << 9) -- GitLab From 049a31afe16e733a54f7da7fdf845034758c6ee1 Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Tue, 20 Oct 2009 10:27:47 +0200 Subject: [PATCH 0464/1165] MIPS: O32: Fix ppoll sys_ppoll syscall needs to use a compat handler on 64bit kernels with o32 user-space. Signed-off-by: Arnaud Patard Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall64-o32.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index ba0dde6465a..14dde4ca932 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -505,7 +505,7 @@ sys_call_table: PTR sys_fchmodat PTR sys_faccessat /* 4300 */ PTR compat_sys_pselect6 - PTR sys_ppoll + PTR compat_sys_ppoll PTR sys_unshare PTR sys_splice PTR sys32_sync_file_range /* 4305 */ -- GitLab From 23aebca486429b74c35b41ac5cac7ce97609fd6a Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Nov 2009 14:10:59 +0100 Subject: [PATCH 0465/1165] ALSA: dummy - Fix descriptions of pcm_substreams parameter Now up to 128 substreams are supported. Reported-by: Adrian Bridgett Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/ALSA-Configuration.txt | 2 +- sound/drivers/dummy.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 1c8eb4518ce..fd9a2f67edf 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -522,7 +522,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. pcm_devs - Number of PCM devices assigned to each card (default = 1, up to 4) pcm_substreams - Number of PCM substreams assigned to each PCM - (default = 8, up to 16) + (default = 8, up to 128) hrtimer - Use hrtimer (=1, default) or system timer (=0) fake_buffer - Fake buffer allocations (default = 1) diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c index 146ef00f94a..252e04ce602 100644 --- a/sound/drivers/dummy.c +++ b/sound/drivers/dummy.c @@ -165,7 +165,7 @@ MODULE_PARM_DESC(enable, "Enable this dummy soundcard."); module_param_array(pcm_devs, int, NULL, 0444); MODULE_PARM_DESC(pcm_devs, "PCM devices # (0-4) for dummy driver."); module_param_array(pcm_substreams, int, NULL, 0444); -MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-16) for dummy driver."); +MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-128) for dummy driver."); //module_param_array(midi_devs, int, NULL, 0444); //MODULE_PARM_DESC(midi_devs, "MIDI devices # (0-2) for dummy driver."); module_param(fake_buffer, bool, 0444); -- GitLab From ad87c64f00e01a694bf90bddc2b4a6c90796d13c Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 2 Nov 2009 14:23:15 +0100 Subject: [PATCH 0466/1165] ALSA: hda - Don't check invalid HP pin alc_automute_pin() might be called even if any HP pin is defined, and it will result in verbs with NID=0. This patch adds a check for the validity of HP widget before issuing any verbs. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 148734d1613..ff20048504b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -965,6 +965,8 @@ static void alc_automute_pin(struct hda_codec *codec) unsigned int nid = spec->autocfg.hp_pins[0]; int i; + if (!nid) + return; pincap = snd_hda_query_pin_caps(codec, nid); if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */ snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0); -- GitLab From f91b90993f0d286be89f06c2f547ced8cfe291c6 Mon Sep 17 00:00:00 2001 From: Martin Stava Date: Mon, 2 Nov 2009 08:39:35 -0600 Subject: [PATCH 0467/1165] 9p: fix a small bug in readdir for long directories Here is a proposed patch for bug in readdir. Listing of dirs with many files fails without this patch. Signed-off-by: Martin Stava Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_dir.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c index 873cd31baa4..cae53d405f2 100644 --- a/fs/9p/vfs_dir.c +++ b/fs/9p/vfs_dir.c @@ -90,6 +90,7 @@ static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir) if (err <= 0) break; + i = 0; n = err; while (i < n) { err = p9stat_read(statbuf + i, buflen-i, &st, -- GitLab From 2511cd0b3b9e9b1c3e9360cc565c3745ac3f3f3f Mon Sep 17 00:00:00 2001 From: Martin Stava Date: Mon, 2 Nov 2009 08:39:34 -0600 Subject: [PATCH 0468/1165] 9p: fix readlink I do not know if you've looked on the patch, but unfortunately it is incorrect. A suggested better version is in this email (the old version didn't work in case the user provided buffer was not long enough - it incorrectly appended null byte on a position of last char, and thus broke the contract of the readlink method). However, I'm still not sure this is 100% correct thing to do, I think readlink is supposed to return buffer without last null byte in all cases, but we do return last null byte (even the old version).. on the other hand it is likely unspecified what is in the remaining part of the buffer, so null character may be fine there ;): Signed-off-by: Martin Stava Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_inode.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 5947628aefe..18f74ec4dce 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -994,8 +994,7 @@ static int v9fs_readlink(struct dentry *dentry, char *buffer, int buflen) P9_DPRINTK(P9_DEBUG_VFS, "%s -> %s (%s)\n", dentry->d_name.name, st->extension, buffer); - retval = buflen; - + retval = strnlen(buffer, buflen); done: kfree(st); return retval; @@ -1062,7 +1061,7 @@ static void *v9fs_vfs_follow_link(struct dentry *dentry, struct nameidata *nd) __putname(link); link = ERR_PTR(len); } else - link[len] = 0; + link[min(len, PATH_MAX-1)] = 0; } nd_set_link(nd, link); -- GitLab From 3e2796a90cf349527e50b3bc4d0b2f4019b1ce7a Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Mon, 2 Nov 2009 08:39:28 -0600 Subject: [PATCH 0469/1165] 9p: fix readdir corner cases The patch below also addresses a couple of other corner cases in readdir seen with a large (e.g. 64k) msize. I'm not sure what people think of my co-opting of fid->aux here. I'd be happy to rework if there's a better way. When the size of the user supplied buffer passed to readdir is smaller than the data returned in one go by the 9P read request, v9fs_dir_readdir() currently discards extra data so that, on the next call, a 9P read request will be issued with offset < previous offset + bytes returned, which voilates the constraint described in paragraph 3 of read(5) description. This patch preseves the leftover data in fid->aux for use in the next call. Signed-off-by: Jim Garlick Signed-off-by: Eric Van Hensbergen --- fs/9p/vfs_dir.c | 94 +++++++++++++++++++++++++++++------------ include/net/9p/client.h | 7 ++- net/9p/client.c | 5 +-- 3 files changed, 72 insertions(+), 34 deletions(-) diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c index cae53d405f2..15cce53bf61 100644 --- a/fs/9p/vfs_dir.c +++ b/fs/9p/vfs_dir.c @@ -39,6 +39,24 @@ #include "v9fs_vfs.h" #include "fid.h" +/** + * struct p9_rdir - readdir accounting + * @mutex: mutex protecting readdir + * @head: start offset of current dirread buffer + * @tail: end offset of current dirread buffer + * @buf: dirread buffer + * + * private structure for keeping track of readdir + * allocated on demand + */ + +struct p9_rdir { + struct mutex mutex; + int head; + int tail; + uint8_t *buf; +}; + /** * dt_type - return file type * @mistat: mistat structure @@ -70,57 +88,79 @@ static int v9fs_dir_readdir(struct file *filp, void *dirent, filldir_t filldir) { int over; struct p9_wstat st; - int err; + int err = 0; struct p9_fid *fid; int buflen; - char *statbuf; - int n, i = 0; + int reclen = 0; + struct p9_rdir *rdir; P9_DPRINTK(P9_DEBUG_VFS, "name %s\n", filp->f_path.dentry->d_name.name); fid = filp->private_data; buflen = fid->clnt->msize - P9_IOHDRSZ; - statbuf = kmalloc(buflen, GFP_KERNEL); - if (!statbuf) - return -ENOMEM; - - while (1) { - err = v9fs_file_readn(filp, statbuf, NULL, buflen, - fid->rdir_fpos); - if (err <= 0) - break; - - i = 0; - n = err; - while (i < n) { - err = p9stat_read(statbuf + i, buflen-i, &st, - fid->clnt->dotu); + + /* allocate rdir on demand */ + if (!fid->rdir) { + rdir = kmalloc(sizeof(struct p9_rdir) + buflen, GFP_KERNEL); + + if (rdir == NULL) { + err = -ENOMEM; + goto exit; + } + spin_lock(&filp->f_dentry->d_lock); + if (!fid->rdir) { + rdir->buf = (uint8_t *)rdir + sizeof(struct p9_rdir); + mutex_init(&rdir->mutex); + rdir->head = rdir->tail = 0; + fid->rdir = (void *) rdir; + rdir = NULL; + } + spin_unlock(&filp->f_dentry->d_lock); + kfree(rdir); + } + rdir = (struct p9_rdir *) fid->rdir; + + err = mutex_lock_interruptible(&rdir->mutex); + while (err == 0) { + if (rdir->tail == rdir->head) { + err = v9fs_file_readn(filp, rdir->buf, NULL, + buflen, filp->f_pos); + if (err <= 0) + goto unlock_and_exit; + + rdir->head = 0; + rdir->tail = err; + } + + while (rdir->head < rdir->tail) { + err = p9stat_read(rdir->buf + rdir->head, + buflen - rdir->head, &st, + fid->clnt->dotu); if (err) { P9_DPRINTK(P9_DEBUG_VFS, "returned %d\n", err); err = -EIO; p9stat_free(&st); - goto free_and_exit; + goto unlock_and_exit; } - - i += st.size+2; - fid->rdir_fpos += st.size+2; + reclen = st.size+2; over = filldir(dirent, st.name, strlen(st.name), filp->f_pos, v9fs_qid2ino(&st.qid), dt_type(&st)); - filp->f_pos += st.size+2; - p9stat_free(&st); if (over) { err = 0; - goto free_and_exit; + goto unlock_and_exit; } + rdir->head += reclen; + filp->f_pos += reclen; } } -free_and_exit: - kfree(statbuf); +unlock_and_exit: + mutex_unlock(&rdir->mutex); +exit: return err; } diff --git a/include/net/9p/client.h b/include/net/9p/client.h index e26812274b7..fb00b329f0d 100644 --- a/include/net/9p/client.h +++ b/include/net/9p/client.h @@ -159,8 +159,7 @@ struct p9_client { * @qid: the &p9_qid server identifier this handle points to * @iounit: the server reported maximum transaction size for this file * @uid: the numeric uid of the local user who owns this handle - * @aux: transport specific information (unused?) - * @rdir_fpos: tracks offset of file position when reading directory contents + * @rdir: readdir accounting structure (allocated on demand) * @flist: per-client-instance fid tracking * @dlist: per-dentry fid tracking * @@ -174,9 +173,9 @@ struct p9_fid { struct p9_qid qid; u32 iounit; uid_t uid; - void *aux; - int rdir_fpos; + void *rdir; + struct list_head flist; struct list_head dlist; /* list of all fids attached to a dentry */ }; diff --git a/net/9p/client.c b/net/9p/client.c index 5bf5f227dbe..8af95b2dddd 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -582,11 +582,9 @@ static struct p9_fid *p9_fid_create(struct p9_client *clnt) memset(&fid->qid, 0, sizeof(struct p9_qid)); fid->mode = -1; - fid->rdir_fpos = 0; fid->uid = current_fsuid(); fid->clnt = clnt; - fid->aux = NULL; - + fid->rdir = NULL; spin_lock_irqsave(&clnt->lock, flags); list_add(&fid->flist, &clnt->fidlist); spin_unlock_irqrestore(&clnt->lock, flags); @@ -609,6 +607,7 @@ static void p9_fid_destroy(struct p9_fid *fid) spin_lock_irqsave(&clnt->lock, flags); list_del(&fid->flist); spin_unlock_irqrestore(&clnt->lock, flags); + kfree(fid->rdir); kfree(fid); } -- GitLab From 05154752cf3767c544b65b5e340793d40b3f1229 Mon Sep 17 00:00:00 2001 From: Gottfried Haider Date: Mon, 2 Nov 2009 11:51:11 +0100 Subject: [PATCH 0470/1165] x86: Add reboot quirk for 3 series Mac mini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reboot does not work out of the box on my "Early 2009" Mac mini (3,1). Detect this machine via DMI as we do for recent MacBooks. Signed-off-by: Gottfried Haider Cc: Ozan ÇaÄŸlayan Cc: Paul Mackerras Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index a1a3cdda06e..f93078746e0 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -436,6 +436,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"), }, }, + { /* Handle problems with rebooting on Apple Macmini3,1 */ + .callback = set_pci_reboot, + .ident = "Apple Macmini3,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"), + }, + }, { } }; -- GitLab From 49557e620339cb134127b5bfbcfecc06b77d0232 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 2 Nov 2009 20:37:20 +1030 Subject: [PATCH 0471/1165] sched: Fix boot crash by zalloc()ing most of the cpu masks I got a boot crash when forcing cpumasks offstack on 32 bit, because find_new_ilb() returned 3 on my UP system (nohz.cpu_mask wasn't zeroed). AFAICT the others need to be zeroed too: only nohz.ilb_grp_nohz_mask is initialized before use. Signed-off-by: Rusty Russell Cc: Peter Zijlstra LKML-Reference: <200911022037.21282.rusty@rustcorp.com.au> Signed-off-by: Ingo Molnar --- kernel/sched.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/sched.c b/kernel/sched.c index cae6700bedb..bf21adb6c9f 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -9535,13 +9535,13 @@ void __init sched_init(void) current->sched_class = &fair_sched_class; /* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */ - alloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT); + zalloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT); #ifdef CONFIG_SMP #ifdef CONFIG_NO_HZ - alloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT); + zalloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT); alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT); #endif - alloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT); + zalloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT); #endif /* SMP */ perf_event_init(); -- GitLab From b00bc0b237055b4c45816325ee14f0bd83e6f590 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 2 Nov 2009 13:01:56 +0100 Subject: [PATCH 0472/1165] uids: Prevent tear down race Ingo triggered the following warning: WARNING: at lib/debugobjects.c:255 debug_print_object+0x42/0x50() Hardware name: System Product Name ODEBUG: init active object type: timer_list Modules linked in: Pid: 2619, comm: dmesg Tainted: G W 2.6.32-rc5-tip+ #5298 Call Trace: [<81035443>] warn_slowpath_common+0x6a/0x81 [<8120e483>] ? debug_print_object+0x42/0x50 [<81035498>] warn_slowpath_fmt+0x29/0x2c [<8120e483>] debug_print_object+0x42/0x50 [<8120ec2a>] __debug_object_init+0x279/0x2d7 [<8120ecb3>] debug_object_init+0x13/0x18 [<810409d2>] init_timer_key+0x17/0x6f [<81041526>] free_uid+0x50/0x6c [<8104ed2d>] put_cred_rcu+0x61/0x72 [<81067fac>] rcu_do_batch+0x70/0x121 debugobjects warns about an enqueued timer being initialized. If CONFIG_USER_SCHED=y the user management code uses delayed work to remove the user from the hash table and tear down the sysfs objects. free_uid is called from RCU and initializes/schedules delayed work if the usage count of the user_struct is 0. The init/schedule happens outside of the uidhash_lock protected region which allows a concurrent caller of find_user() to reference the about to be destroyed user_struct w/o preventing the work from being scheduled. If the next free_uid call happens before the work timer expired then the active timer is initialized and the work scheduled again. The race was introduced in commit 5cb350ba (sched: group scheduling, sysfs tunables) and made more prominent by commit 3959214f (sched: delayed cleanup of user_struct) Move the init/schedule_delayed_work inside of the uidhash_lock protected region to prevent the race. Signed-off-by: Thomas Gleixner Acked-by: Dhaval Giani Cc: Paul E. McKenney Cc: Kay Sievers Cc: stable@kernel.org --- kernel/user.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/user.c b/kernel/user.c index 2c000e7132a..46d0165ca70 100644 --- a/kernel/user.c +++ b/kernel/user.c @@ -330,9 +330,9 @@ done: */ static void free_user(struct user_struct *up, unsigned long flags) { - spin_unlock_irqrestore(&uidhash_lock, flags); INIT_DELAYED_WORK(&up->work, cleanup_user_struct); schedule_delayed_work(&up->work, msecs_to_jiffies(1000)); + spin_unlock_irqrestore(&uidhash_lock, flags); } #else /* CONFIG_USER_SCHED && CONFIG_SYSFS */ -- GitLab From 83f5b01ffbbaea6f97c9a79d21e240dbfb69f2f1 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 28 Oct 2009 08:14:49 -0700 Subject: [PATCH 0473/1165] rcu: Fix long-grace-period race between forcing and initialization Very long RCU read-side critical sections (50 milliseconds or so) can cause a race between force_quiescent_state() and rcu_start_gp() as follows on kernel builds with multi-level rcu_node hierarchies: 1. CPU 0 calls force_quiescent_state(), sees that there is a grace period in progress, and acquires ->fsqlock. 2. CPU 1 detects the end of the grace period, and so cpu_quiet_msk_finish() sets rsp->completed to rsp->gpnum. This operation is carried out under the root rnp->lock, but CPU 0 has not yet acquired that lock. Note that rsp->signaled is still RCU_SAVE_DYNTICK from the last grace period. 3. CPU 1 calls rcu_start_gp(), but no one wants a new grace period, so it drops the root rnp->lock and returns. 4. CPU 0 acquires the root rnp->lock and picks up rsp->completed and rsp->signaled, then drops rnp->lock. It then enters the RCU_SAVE_DYNTICK leg of the switch statement. 5. CPU 2 invokes call_rcu(), and now needs a new grace period. It calls rcu_start_gp(), which acquires the root rnp->lock, sets rsp->signaled to RCU_GP_INIT (too bad that CPU 0 is already in the RCU_SAVE_DYNTICK leg of the switch statement!) and starts initializing the rcu_node hierarchy. If there are multiple levels to the hierarchy, it will drop the root rnp->lock and initialize the lower levels of the hierarchy. 6. CPU 0 notes that rsp->completed has not changed, which permits both CPU 2 and CPU 0 to try updating it concurrently. If CPU 0's update prevails, later calls to force_quiescent_state() can count old quiescent states against the new grace period, which can in turn result in premature ending of grace periods. Not good. This patch adds an RCU_GP_IDLE state for rsp->signaled that is set initially at boot time and any time a grace period ends. This prevents CPU 0 from getting into the workings of force_quiescent_state() in step 4. Additional locking and checks prevent the concurrent update of rsp->signaled in step 6. Signed-off-by: Paul E. McKenney Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1256742889199-git-send-email-> Signed-off-by: Ingo Molnar --- kernel/rcutree.c | 16 +++++++++++----- kernel/rcutree.h | 7 ++++--- 2 files changed, 15 insertions(+), 8 deletions(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 0536125b049..f3077c0ab18 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -59,7 +59,7 @@ NUM_RCU_LVL_2, \ NUM_RCU_LVL_3, /* == MAX_RCU_LVLS */ \ }, \ - .signaled = RCU_SIGNAL_INIT, \ + .signaled = RCU_GP_IDLE, \ .gpnum = -300, \ .completed = -300, \ .onofflock = __SPIN_LOCK_UNLOCKED(&name.onofflock), \ @@ -657,14 +657,17 @@ rcu_start_gp(struct rcu_state *rsp, unsigned long flags) * irqs disabled. */ rcu_for_each_node_breadth_first(rsp, rnp) { - spin_lock(&rnp->lock); /* irqs already disabled. */ + spin_lock(&rnp->lock); /* irqs already disabled. */ rcu_preempt_check_blocked_tasks(rnp); rnp->qsmask = rnp->qsmaskinit; rnp->gpnum = rsp->gpnum; - spin_unlock(&rnp->lock); /* irqs already disabled. */ + spin_unlock(&rnp->lock); /* irqs remain disabled. */ } + rnp = rcu_get_root(rsp); + spin_lock(&rnp->lock); /* irqs already disabled. */ rsp->signaled = RCU_SIGNAL_INIT; /* force_quiescent_state now OK. */ + spin_unlock(&rnp->lock); /* irqs remain disabled. */ spin_unlock_irqrestore(&rsp->onofflock, flags); } @@ -706,6 +709,7 @@ static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags) { WARN_ON_ONCE(!rcu_gp_in_progress(rsp)); rsp->completed = rsp->gpnum; + rsp->signaled = RCU_GP_IDLE; rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]); rcu_start_gp(rsp, flags); /* releases root node's rnp->lock. */ } @@ -1162,9 +1166,10 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) } spin_unlock(&rnp->lock); switch (signaled) { + case RCU_GP_IDLE: case RCU_GP_INIT: - break; /* grace period still initializing, ignore. */ + break; /* grace period idle or initializing, ignore. */ case RCU_SAVE_DYNTICK: @@ -1178,7 +1183,8 @@ static void force_quiescent_state(struct rcu_state *rsp, int relaxed) /* Update state, record completion counter. */ spin_lock(&rnp->lock); - if (lastcomp == rsp->completed) { + if (lastcomp == rsp->completed && + rsp->signaled == RCU_SAVE_DYNTICK) { rsp->signaled = RCU_FORCE_QS; dyntick_record_completed(rsp, lastcomp); } diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 1823c6e2060..1899023b096 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -201,9 +201,10 @@ struct rcu_data { }; /* Values for signaled field in struct rcu_state. */ -#define RCU_GP_INIT 0 /* Grace period being initialized. */ -#define RCU_SAVE_DYNTICK 1 /* Need to scan dyntick state. */ -#define RCU_FORCE_QS 2 /* Need to force quiescent state. */ +#define RCU_GP_IDLE 0 /* No grace period in progress. */ +#define RCU_GP_INIT 1 /* Grace period being initialized. */ +#define RCU_SAVE_DYNTICK 2 /* Need to scan dyntick state. */ +#define RCU_FORCE_QS 3 /* Need to force quiescent state. */ #ifdef CONFIG_NO_HZ #define RCU_SIGNAL_INIT RCU_SAVE_DYNTICK #else /* #ifdef CONFIG_NO_HZ */ -- GitLab From dd77038d233d106f297b907bf51459dfb1099eb1 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Fri, 30 Oct 2009 19:32:25 -0200 Subject: [PATCH 0474/1165] perf_events: Fix some typo in the perf events config description Signed-off-by: Thadeu Lima de Souza Cascardo Cc: trivial@kernel.org LKML-Reference: <1256938346-8230-1-git-send-email-cascardo@holoscopio.com> Signed-off-by: Ingo Molnar --- init/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/init/Kconfig b/init/Kconfig index 09c5c6431f4..3b8c7bc943b 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -937,7 +937,7 @@ config PERF_EVENTS Enable kernel support for various performance events provided by software and hardware. - Software events are supported either build-in or via the + Software events are supported either built-in or via the use of generic tracepoints. Most modern CPUs support performance events via performance @@ -949,7 +949,7 @@ config PERF_EVENTS used to profile the code that runs on that CPU. The Linux Performance Event subsystem provides an abstraction of - these software and hardware cevent apabilities, available via a + these software and hardware event capabilities, available via a system call and used by the "perf" utility in tools/perf/. It provides per task and per CPU counters, and it provides event capabilities on top of those. -- GitLab From 6603a4fd5195a004dec5f9568e38ff76bae630c1 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Fri, 30 Oct 2009 12:06:05 +0100 Subject: [PATCH 0475/1165] ARM: 5776/1: Check compiler version and EABI support when adding ARM unwind support. ARM unwind is known to compile only with EABI and not-buggy compilers. The problem is not the unwinding information but the -fno-frame-pointer option added as a result of !CONFIG_FRAME_POINTER. Now we check the compiler and raise a #warning in case of wrong compiler. Signed-off-by: Claudio Scordino Signed-off-by: Russell King --- arch/arm/kernel/unwind.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 39baf1128bf..786ac2b6914 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -26,6 +26,15 @@ * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html */ +#if !defined (__ARM_EABI__) +#warning Your compiler does not have EABI support. +#warning ARM unwind is known to compile only with EABI compilers. +#warning Change compiler or disable ARM_UNWIND option. +#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2) +#warning Your compiler is too buggy; it is known to not compile ARM unwind support. +#warning Change compiler or disable ARM_UNWIND option. +#endif + #include #include #include -- GitLab From 4b46d6416548fb6a0940dfd9911fd895eb6247b3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 1 Nov 2009 17:44:24 +0000 Subject: [PATCH 0476/1165] ARM: ensure initial page tables are setup for SMP systems Mapping the same memory using two different attributes (memory type, shareability, cacheability) is unpredictable. During boot, we encounter a situation when we're updating the kernel's page tables which can lead to dirty cache lines existing in the cache which are subsequently missed. This causes stack corruption, and therefore a crash. Therefore, ensure that the shared and cacheability settings matches the configuration that will be used later; this together with the restriction in early_cachepolicy() ensures that we won't create a mismatch during boot. Acked-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 7 +++++++ arch/arm/mm/proc-v6.S | 7 ++++--- arch/arm/mm/proc-v7.S | 7 ++++--- 3 files changed, 15 insertions(+), 6 deletions(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 02243eeccf5..ea67be0223a 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -117,6 +117,13 @@ static void __init early_cachepolicy(char **p) } if (i == ARRAY_SIZE(cache_policies)) printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n"); + /* + * This restriction is partly to do with the way we boot; it is + * unpredictable to have memory mapped using two different sets of + * memory attributes (shared, type, and cache attribs). We can not + * change these attributes once the initial assembly has setup the + * page tables. + */ if (cpu_architecture() >= CPU_ARCH_ARMv6) { printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n"); cachepolicy = CPOLICY_WRITEBACK; diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 194737d60a2..70f75d2e3ea 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -32,8 +32,10 @@ #ifndef CONFIG_SMP #define TTB_FLAGS TTB_RGN_WBWA +#define PMD_FLAGS PMD_SECT_WB #else #define TTB_FLAGS TTB_RGN_WBWA|TTB_S +#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S #endif ENTRY(cpu_v6_proc_init) @@ -222,10 +224,9 @@ __v6_proc_info: .long 0x0007b000 .long 0x0007f000 .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ + PMD_SECT_AP_READ | \ + PMD_FLAGS .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 23ebcf6eab9..eeeed01ee44 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -33,9 +33,11 @@ #ifndef CONFIG_SMP /* PTWs cacheable, inner WB not shareable, outer WB not shareable */ #define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB +#define PMD_FLAGS PMD_SECT_WB #else /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */ #define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA +#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S #endif ENTRY(cpu_v7_proc_init) @@ -326,10 +328,9 @@ __v7_proc_info: .long 0x000f0000 @ Required ID value .long 0x000f0000 @ Mask for ID .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ + PMD_SECT_AP_READ | \ + PMD_FLAGS .long PMD_TYPE_SECT | \ PMD_SECT_XN | \ PMD_SECT_AP_WRITE | \ -- GitLab From e8c93fc7b7221b6ac7e7ddbd0e21e205bf9e801a Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 2 Nov 2009 09:23:08 -0800 Subject: [PATCH 0477/1165] Revert "[IA64] fix percpu warnings" This reverts commit b94b08081fcecf83fa690d6c5664f6316fe72208. genksyms currently cannot handle complicated types for exported percpu variables. Drop this patch for now as it prevents a module from being loaded on sn2 systems: xpc: no symbol version for per_cpu____sn_cnodeid_to_nasid xpc: Unknown symbol per_cpu____sn_cnodeid_to_nasid Signed-off-by: Tony Luck --- arch/ia64/include/asm/sn/arch.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/include/asm/sn/arch.h b/arch/ia64/include/asm/sn/arch.h index f5f493b0c07..7caa1f44cd9 100644 --- a/arch/ia64/include/asm/sn/arch.h +++ b/arch/ia64/include/asm/sn/arch.h @@ -71,7 +71,7 @@ DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info); * Compact node ID to nasid mappings kept in the per-cpu data areas of each * cpu. */ -DECLARE_PER_CPU(short [MAX_COMPACT_NODES], __sn_cnodeid_to_nasid); +DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]); #define sn_cnodeid_to_nasid (&__get_cpu_var(__sn_cnodeid_to_nasid[0])) -- GitLab From c9354c85c1c7bac788ce57d3c17f2016c1c45b1d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 2 Nov 2009 09:29:55 -0800 Subject: [PATCH 0478/1165] i915: fix intel graphics suspend breakage due to resume/lid event confusion In commit c1c7af60892070e4b82ad63bbfb95ae745056de0 ("drm/i915: force mode set at lid open time") the intel graphics driver was taught to restore the LVDS mode on lid open. That caused problems with interaction with the suspend/resume code, which commonly runs at the same time (suspend is often caused by the lid close event, while lid open is commonly a resume event), which was worked around with in commit 06891e27a9b5dba5268bb80e41a283f51335afe7 ("drm/i915: fix suspend/resume breakage in lid notifier"). However, in the meantime the lid event code had also grown a user event notifier (commit 06324194eee97a51b5f172270df49ec39192d6cc: "drm/i915: generate a KMS uevent at lid open/close time"), and now _that_ causes problems with suspend/resume and some versions of Xorg reacting to those uevents by setting the mode. So this effectively reverts that commit 06324194ee, and makes the lid open protection logic against suspend/resume more explicit. This fixes at least one laptop. See http://bugzilla.kernel.org/show_bug.cgi?id=14484 for more details. Acked-by: Jesse Barnes Cc: Riccardo Magliocchetti Cc: Eric Anholt Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/i915_drv.c | 5 +++-- drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/intel_lvds.c | 25 ++++++++++++++++++++----- 3 files changed, 24 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index b93814c0d3e..7f436ec075f 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -89,7 +89,8 @@ static int i915_suspend(struct drm_device *dev, pm_message_t state) pci_set_power_state(dev->pdev, PCI_D3hot); } - dev_priv->suspended = 1; + /* Modeset on resume, not lid events */ + dev_priv->modeset_on_lid = 0; return 0; } @@ -124,7 +125,7 @@ static int i915_resume(struct drm_device *dev) drm_helper_resume_force_mode(dev); } - dev_priv->suspended = 0; + dev_priv->modeset_on_lid = 0; return ret; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 6035d3dae85..c5df2234418 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -274,7 +274,7 @@ typedef struct drm_i915_private { struct drm_i915_display_funcs display; /* Register state */ - bool suspended; + bool modeset_on_lid; u8 saveLBB; u32 saveDSPACNTR; u32 saveDSPBCNTR; diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 98ae3d73577..808bbe412ba 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -656,6 +656,15 @@ static int intel_lvds_get_modes(struct drm_connector *connector) return 0; } +/* + * Lid events. Note the use of 'modeset_on_lid': + * - we set it on lid close, and reset it on open + * - we use it as a "only once" bit (ie we ignore + * duplicate events where it was already properly + * set/reset) + * - the suspend/resume paths will also set it to + * zero, since they restore the mode ("lid open"). + */ static int intel_lid_notify(struct notifier_block *nb, unsigned long val, void *unused) { @@ -663,13 +672,19 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val, container_of(nb, struct drm_i915_private, lid_notifier); struct drm_device *dev = dev_priv->dev; - if (acpi_lid_open() && !dev_priv->suspended) { - mutex_lock(&dev->mode_config.mutex); - drm_helper_resume_force_mode(dev); - mutex_unlock(&dev->mode_config.mutex); + if (!acpi_lid_open()) { + dev_priv->modeset_on_lid = 1; + return NOTIFY_OK; } - drm_sysfs_hotplug_event(dev_priv->dev); + if (!dev_priv->modeset_on_lid) + return NOTIFY_OK; + + dev_priv->modeset_on_lid = 0; + + mutex_lock(&dev->mode_config.mutex); + drm_helper_resume_force_mode(dev); + mutex_unlock(&dev->mode_config.mutex); return NOTIFY_OK; } -- GitLab From 32c5fc10e79a7053ac5728b01a0bff55cbcb9d49 Mon Sep 17 00:00:00 2001 From: Bo Liu Date: Mon, 2 Nov 2009 16:50:33 +0000 Subject: [PATCH 0479/1165] mm: remove incorrect swap_count() from try_to_unuse() In try_to_unuse(), swcount is a local copy of *swap_map, including the SWAP_HAS_CACHE bit; but a wrong comparison against swap_count(*swap_map), which masks off the SWAP_HAS_CACHE bit, succeeded where it should fail. That had the effect of resetting the mm from which to start searching for the next swap page, to an irrelevant mm instead of to an mm in which this swap page had been found: which may increase search time by ~20%. But we're used to swapoff being slow, so never noticed the slowdown. Remove that one spurious use of swap_count(): Bo Liu thought it merely redundant, Hugh rewrote the description since it was measurably wrong. Signed-off-by: Bo Liu Signed-off-by: Hugh Dickins Reviewed-by: KAMEZAWA Hiroyuki Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- mm/swapfile.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/mm/swapfile.c b/mm/swapfile.c index a1bc6b9af9a..9c590eef791 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -1151,8 +1151,7 @@ static int try_to_unuse(unsigned int type) } else retval = unuse_mm(mm, entry, page); - if (set_start_mm && - swap_count(*swap_map) < swcount) { + if (set_start_mm && *swap_map < swcount) { mmput(new_start_mm); atomic_inc(&mm->mm_users); new_start_mm = mm; -- GitLab From d4da6c9ccf648f3f1cb5bf9d981a62c253d30e28 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 2 Nov 2009 10:15:27 -0800 Subject: [PATCH 0480/1165] Revert "ext4: Remove journal_checksum mount option and enable it by default" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit d0646f7b636d067d715fab52a2ba9c6f0f46b0d7, as requested by Eric Sandeen. It can basically cause an ext4 filesystem to miss recovery (and thus get mounted with errors) if the journal checksum does not match. Quoth Eric: "My hand-wavy hunch about what is happening is that we're finding a bad checksum on the last partially-written transaction, which is not surprising, but if we have a wrapped log and we're doing the initial scan for head/tail, and we abort scanning on that bad checksum, then we are essentially running an unrecovered filesystem. But that's hand-wavy and I need to go look at the code. We lived without journal checksums on by default until now, and at this point they're doing more harm than good, so we should revert the default-changing commit until we can fix it and do some good power-fail testing with the fixes in place." See http://bugzilla.kernel.org/show_bug.cgi?id=14354 for all the gory details. Requested-by: Eric Sandeen Cc: Theodore Tso Cc: Alexey Fisher Cc: Maxim Levitsky Cc: Aneesh Kumar K.V Cc: Mathias Burén Signed-off-by: Linus Torvalds --- Documentation/filesystems/ext4.txt | 8 +++++++- fs/ext4/ext4.h | 1 + fs/ext4/super.c | 20 ++++++++++++++------ 3 files changed, 22 insertions(+), 7 deletions(-) diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index bf4f4b7e11b..6d94e0696f8 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -134,9 +134,15 @@ ro Mount filesystem read only. Note that ext4 will mount options "ro,noload" can be used to prevent writes to the filesystem. +journal_checksum Enable checksumming of the journal transactions. + This will allow the recovery code in e2fsck and the + kernel to detect corruption in the kernel. It is a + compatible change and will be ignored by older kernels. + journal_async_commit Commit block can be written to disk without waiting for descriptor blocks. If enabled older kernels cannot - mount the device. + mount the device. This will enable 'journal_checksum' + internally. journal=update Update the ext4 file system's journal to the current format. diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 984ca0cb38c..00d153f2f26 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -743,6 +743,7 @@ struct ext4_inode_info { #define EXT4_MOUNT_QUOTA 0x80000 /* Some quota option set */ #define EXT4_MOUNT_USRQUOTA 0x100000 /* "old" user quota */ #define EXT4_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */ +#define EXT4_MOUNT_JOURNAL_CHECKSUM 0x800000 /* Journal checksums */ #define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT 0x1000000 /* Journal Async Commit */ #define EXT4_MOUNT_I_VERSION 0x2000000 /* i_version support */ #define EXT4_MOUNT_DELALLOC 0x8000000 /* Delalloc support */ diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 312211ee05a..d4ca92aab51 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1300,9 +1300,11 @@ static int parse_options(char *options, struct super_block *sb, *journal_devnum = option; break; case Opt_journal_checksum: - break; /* Kept for backwards compatibility */ + set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM); + break; case Opt_journal_async_commit: set_opt(sbi->s_mount_opt, JOURNAL_ASYNC_COMMIT); + set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM); break; case Opt_noload: set_opt(sbi->s_mount_opt, NOLOAD); @@ -2759,14 +2761,20 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount4; } - jbd2_journal_set_features(sbi->s_journal, - JBD2_FEATURE_COMPAT_CHECKSUM, 0, 0); - if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) - jbd2_journal_set_features(sbi->s_journal, 0, 0, + if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) { + jbd2_journal_set_features(sbi->s_journal, + JBD2_FEATURE_COMPAT_CHECKSUM, 0, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT); - else + } else if (test_opt(sb, JOURNAL_CHECKSUM)) { + jbd2_journal_set_features(sbi->s_journal, + JBD2_FEATURE_COMPAT_CHECKSUM, 0, 0); jbd2_journal_clear_features(sbi->s_journal, 0, 0, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT); + } else { + jbd2_journal_clear_features(sbi->s_journal, + JBD2_FEATURE_COMPAT_CHECKSUM, 0, + JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT); + } /* We have now updated the journal if required, so we can * validate the data journaling mode. */ -- GitLab From 7400f42e9d765fa0656b432f3ab1245f9710f190 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 31 Oct 2009 07:40:37 +0100 Subject: [PATCH 0481/1165] cfg80211: fix NULL ptr deref commit 211a4d12abf86fe0df4cd68fc6327cbb58f56f81 Author: Johannes Berg Date: Tue Oct 20 15:08:53 2009 +0900 cfg80211: sme: deauthenticate on assoc failure introduced a potential NULL pointer dereference that some people have been hitting for some reason -- the params.bssid pointer is not guaranteed to be non-NULL for what seems to be a race between various ways of reaching the same thing. While I'm trying to analyse the problem more let's first fix the crash. I think the real fix may be to avoid doing _anything_ if it ended up being NULL, but right now I'm not sure yet. I think http://bugzilla.kernel.org/show_bug.cgi?id=14342 might also be this issue. Reported-by: Parag Warudkar Tested-by: Parag Warudkar Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/sme.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/wireless/sme.c b/net/wireless/sme.c index ece378d531e..9f0b2800a9d 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -165,7 +165,7 @@ void cfg80211_conn_work(struct work_struct *work) struct cfg80211_registered_device *rdev = container_of(work, struct cfg80211_registered_device, conn_work); struct wireless_dev *wdev; - u8 bssid[ETH_ALEN]; + u8 bssid_buf[ETH_ALEN], *bssid = NULL; rtnl_lock(); cfg80211_lock_rdev(rdev); @@ -181,7 +181,10 @@ void cfg80211_conn_work(struct work_struct *work) wdev_unlock(wdev); continue; } - memcpy(bssid, wdev->conn->params.bssid, ETH_ALEN); + if (wdev->conn->params.bssid) { + memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN); + bssid = bssid_buf; + } if (cfg80211_conn_do_work(wdev)) __cfg80211_connect_result( wdev->netdev, bssid, -- GitLab From c1f9a764cf47686b1f5a0cf87ada68d90056136a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 1 Nov 2009 19:25:40 +0100 Subject: [PATCH 0482/1165] mac80211: check interface is down before type change For some strange reason the netif_running() check ended up after the actual type change instead of before, potentially causing all kinds of problems if the interface is up while changing the type; one of the problems manifests itself as a warning: WARNING: at net/mac80211/iface.c:651 ieee80211_teardown_sdata+0xda/0x1a0 [mac80211]() Hardware name: Aspire one Pid: 2596, comm: wpa_supplicant Tainted: G W 2.6.31-10-generic #32-Ubuntu Call Trace: [] warn_slowpath_common+0x6d/0xa0 [] warn_slowpath_null+0x15/0x20 [] ieee80211_teardown_sdata+0xda/0x1a0 [mac80211] [] ieee80211_if_change_type+0x4a/0xc0 [mac80211] [] ieee80211_change_iface+0x61/0xa0 [mac80211] [] cfg80211_wext_siwmode+0xc7/0x120 [cfg80211] [] ioctl_standard_call+0x58/0xf0 (http://www.kerneloops.org/searchweek.php?search=ieee80211_teardown_sdata) Cc: Arjan van de Ven Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 5608f6c6841..7b5131bd6fa 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -72,6 +72,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, struct ieee80211_sub_if_data *sdata; int ret; + if (netif_running(dev)) + return -EBUSY; + if (!nl80211_type_check(type)) return -EINVAL; @@ -81,9 +84,6 @@ static int ieee80211_change_iface(struct wiphy *wiphy, if (ret) return ret; - if (netif_running(sdata->dev)) - return -EBUSY; - if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len) ieee80211_sdata_set_mesh_id(sdata, params->mesh_id_len, -- GitLab From 43309f3b521302bb66c4c9e66704dd3675e4d725 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 17 Oct 2009 17:46:22 +0800 Subject: [PATCH 0483/1165] i2c: imx: check busy bit when START/STOP The controller can't do anything else before it actually generates START/STOP. So we check busy bit to make sure START/STOP is successfully finished. If we don't check busy bit, START/STOP may fail on some fast CPUs. Signed-off-by: Richard Zhao Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-imx.c | 62 +++++++++++++++++++++++++----------- 1 file changed, 44 insertions(+), 18 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 4afba3ec2a6..6055e92f0ac 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -120,19 +120,25 @@ struct imx_i2c_struct { wait_queue_head_t queue; unsigned long i2csr; unsigned int disable_delay; + int stopped; }; /** Functions for IMX I2C adapter driver *************************************** *******************************************************************************/ -static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx) +static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) { unsigned long orig_jiffies = jiffies; + unsigned int temp; dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - /* wait for bus not busy */ - while (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_IBB) { + while (1) { + temp = readb(i2c_imx->base + IMX_I2C_I2SR); + if (for_busy && (temp & I2SR_IBB)) + break; + if (!for_busy && !(temp & I2SR_IBB)) + break; if (signal_pending(current)) { dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C Interrupted\n", __func__); @@ -179,39 +185,55 @@ static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx) return 0; } -static void i2c_imx_start(struct imx_i2c_struct *i2c_imx) +static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) { unsigned int temp = 0; + int result; dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); /* Enable I2C controller */ + writeb(0, i2c_imx->base + IMX_I2C_I2SR); writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); + + /* Wait controller to be stable */ + udelay(50); + /* Start I2C transaction */ temp = readb(i2c_imx->base + IMX_I2C_I2CR); temp |= I2CR_MSTA; writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + result = i2c_imx_bus_busy(i2c_imx, 1); + if (result) + return result; + i2c_imx->stopped = 0; + temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK; writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + return result; } static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) { unsigned int temp = 0; - /* Stop I2C transaction */ - dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - temp = readb(i2c_imx->base + IMX_I2C_I2CR); - temp &= ~I2CR_MSTA; - writeb(temp, i2c_imx->base + IMX_I2C_I2CR); - /* setup chip registers to defaults */ - writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); - writeb(0, i2c_imx->base + IMX_I2C_I2SR); + if (!i2c_imx->stopped) { + /* Stop I2C transaction */ + dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); + temp = readb(i2c_imx->base + IMX_I2C_I2CR); + temp &= ~(I2CR_MSTA | I2CR_MTX); + writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + i2c_imx->stopped = 1; + } /* * This delay caused by an i.MXL hardware bug. * If no (or too short) delay, no "STOP" bit will be generated. */ udelay(i2c_imx->disable_delay); + + if (!i2c_imx->stopped) + i2c_imx_bus_busy(i2c_imx, 0); + /* Disable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2CR); } @@ -341,11 +363,15 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs) if (result) return result; if (i == (msgs->len - 1)) { + /* It must generate STOP before read I2DR to prevent + controller from generating another clock cycle */ dev_dbg(&i2c_imx->adapter.dev, "<%s> clear MSTA\n", __func__); temp = readb(i2c_imx->base + IMX_I2C_I2CR); - temp &= ~I2CR_MSTA; + temp &= ~(I2CR_MSTA | I2CR_MTX); writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + i2c_imx_bus_busy(i2c_imx, 0); + i2c_imx->stopped = 1; } else if (i == (msgs->len - 2)) { dev_dbg(&i2c_imx->adapter.dev, "<%s> set TXAK\n", __func__); @@ -370,14 +396,11 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - /* Check if i2c bus is not busy */ - result = i2c_imx_bus_busy(i2c_imx); + /* Start I2C transfer */ + result = i2c_imx_start(i2c_imx); if (result) goto fail0; - /* Start I2C transfer */ - i2c_imx_start(i2c_imx); - /* read/write data */ for (i = 0; i < num; i++) { if (i) { @@ -386,6 +409,9 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter, temp = readb(i2c_imx->base + IMX_I2C_I2CR); temp |= I2CR_RSTA; writeb(temp, i2c_imx->base + IMX_I2C_I2CR); + result = i2c_imx_bus_busy(i2c_imx, 1); + if (result) + goto fail0; } dev_dbg(&i2c_imx->adapter.dev, "<%s> transfer message: %d\n", __func__, i); -- GitLab From a4094a76e6a45691b8f9108060b750a48b4c4563 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 17 Oct 2009 17:46:23 +0800 Subject: [PATCH 0484/1165] i2c: imx: only imx1 needs disable delay check cpu_is_mx1() when disable delay. Signed-off-by: Richard Zhao Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-imx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 6055e92f0ac..671d37c23f4 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -225,11 +225,13 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) writeb(temp, i2c_imx->base + IMX_I2C_I2CR); i2c_imx->stopped = 1; } - /* - * This delay caused by an i.MXL hardware bug. - * If no (or too short) delay, no "STOP" bit will be generated. - */ - udelay(i2c_imx->disable_delay); + if (cpu_is_mx1()) { + /* + * This delay caused by an i.MXL hardware bug. + * If no (or too short) delay, no "STOP" bit will be generated. + */ + udelay(i2c_imx->disable_delay); + } if (!i2c_imx->stopped) i2c_imx_bus_busy(i2c_imx, 0); -- GitLab From db3a3d4ef7f676501325ae9c7ce0c193c2c1b28f Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Sat, 17 Oct 2009 17:46:24 +0800 Subject: [PATCH 0485/1165] i2c: imx: disable clock when it's possible to save power. Enable clock before START, disable it after STOP. Signed-off-by: Richard Zhao Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-imx.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 671d37c23f4..e3654d683e1 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -121,6 +121,7 @@ struct imx_i2c_struct { unsigned long i2csr; unsigned int disable_delay; int stopped; + unsigned int ifdr; /* IMX_I2C_IFDR */ }; /** Functions for IMX I2C adapter driver *************************************** @@ -192,6 +193,8 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); + clk_enable(i2c_imx->clk); + writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR); /* Enable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2SR); writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR); @@ -238,6 +241,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) /* Disable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2CR); + clk_disable(i2c_imx->clk); } static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, @@ -257,8 +261,8 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, else for (i = 0; i2c_clk_div[i][0] < div; i++); - /* Write divider value to register */ - writeb(i2c_clk_div[i][1], i2c_imx->base + IMX_I2C_IFDR); + /* Store divider value */ + i2c_imx->ifdr = i2c_clk_div[i][1]; /* * There dummy delay is calculated. @@ -528,7 +532,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev) dev_err(&pdev->dev, "can't get I2C clock\n"); goto fail3; } - clk_enable(i2c_imx->clk); /* Request IRQ */ ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx); @@ -577,7 +580,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev) fail5: free_irq(i2c_imx->irq, i2c_imx); fail4: - clk_disable(i2c_imx->clk); clk_put(i2c_imx->clk); fail3: release_mem_region(i2c_imx->res->start, resource_size(res)); @@ -614,8 +616,6 @@ static int __exit i2c_imx_remove(struct platform_device *pdev) if (pdata && pdata->exit) pdata->exit(&pdev->dev); - /* Disable I2C clock */ - clk_disable(i2c_imx->clk); clk_put(i2c_imx->clk); release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res)); -- GitLab From 45da790ebe746bb29f7e4adf806c020db6ff7755 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 13 Oct 2009 10:12:03 +0200 Subject: [PATCH 0486/1165] i2c-mpc: Do not generate STOP after read. The driver always ends a read with a STOP condition which breaks subsequent I2C reads/writes in the same transaction as these expect to do a repeated START(ReSTART). This will also help I2C multimaster as the bus will not be released after the first read, but when the whole transaction ends. Signed-off-by: Joakim Tjernlund Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-mpc.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index d325e86e310..f627001108b 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -365,9 +365,6 @@ static int mpc_write(struct mpc_i2c *i2c, int target, unsigned timeout = i2c->adap.timeout; u32 flags = restart ? CCR_RSTA : 0; - /* Start with MEN */ - if (!restart) - writeccr(i2c, CCR_MEN); /* Start as master */ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); /* Write target byte */ @@ -396,9 +393,6 @@ static int mpc_read(struct mpc_i2c *i2c, int target, int i, result; u32 flags = restart ? CCR_RSTA : 0; - /* Start with MEN */ - if (!restart) - writeccr(i2c, CCR_MEN); /* Switch to read - restart */ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); /* Write target address byte - this time with the read flag set */ @@ -425,9 +419,9 @@ static int mpc_read(struct mpc_i2c *i2c, int target, /* Generate txack on next to last byte */ if (i == length - 2) writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); - /* Generate stop on last byte */ + /* Do not generate stop on last byte */ if (i == length - 1) - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK); + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX); data[i] = readb(i2c->base + MPC_I2C_DR); } -- GitLab From fa5d11133b07053270e18fa9c18560e66e79217e Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Mon, 2 Nov 2009 18:50:49 -0500 Subject: [PATCH 0487/1165] ext4: discard preallocation when restarting a transaction during truncate When restart a transaction during a truncate operation, we drop and reacquire i_data_sem. After reacquiring i_data_sem, we need to discard any inode-based preallocation that might have been grabbed while we released i_data_sem (for example, if pdflush is allocating blocks and racing against the truncate). Signed-off-by: Aneesh Kumar K.V Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 5c5bc5dafff..d1ec698a91d 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -193,7 +193,7 @@ static int try_to_extend_transaction(handle_t *handle, struct inode *inode) * so before we call here everything must be consistently dirtied against * this transaction. */ - int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode, +int ext4_truncate_restart_trans(handle_t *handle, struct inode *inode, int nblocks) { int ret; @@ -209,6 +209,7 @@ static int try_to_extend_transaction(handle_t *handle, struct inode *inode) up_write(&EXT4_I(inode)->i_data_sem); ret = ext4_journal_restart(handle, blocks_for_truncate(inode)); down_write(&EXT4_I(inode)->i_data_sem); + ext4_discard_preallocations(inode); return ret; } -- GitLab From 5e0fa3f63eda875cbe23be37d64a16c65a577209 Mon Sep 17 00:00:00 2001 From: Stanislav Brabec Date: Thu, 22 Oct 2009 23:05:03 +0200 Subject: [PATCH 0488/1165] [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi Borzoi, Terrier and Akita use the same NAND Flash OOB layout, which seems to be different from Spitz for some reason. Here is a fix. When the code was ported to the platform data, the map was applied just for Akita. After this patch, Flash works again on Borzoi. Terrier still has a problem with partition table different from Borzoi (unfixable without reading of the system configuration in flash) and JFFS2 partitions can be mounted (with some "Empty flash at ... ends at ..." in the syslog). Signed-off-by: Stanislav Brabec Acked-by: Richard Purdie Signed-off-by: Eric Miao --- arch/arm/mach-pxa/spitz.c | 39 +++++++++++++++++++++++---------------- 1 file changed, 23 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 82ff5733e4d..3da45d05174 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -779,11 +779,34 @@ static void __init common_init(void) pxa_set_i2c_info(NULL); } +#if defined(CONFIG_MACH_AKITA) || defined(CONFIG_MACH_BORZOI) +static struct nand_bbt_descr sharpsl_akita_bbt = { + .options = 0, + .offs = 4, + .len = 1, + .pattern = scan_ff_pattern +}; + +static struct nand_ecclayout akita_oobinfo = { + .eccbytes = 24, + .eccpos = { + 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, + 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, + 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, + .oobfree = {{0x08, 0x09}} +}; +#endif + #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI) static void __init spitz_init(void) { spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; + if (machine_is_borzoi()) { + sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; + sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; + } + platform_scoop_config = &spitz_pcmcia_config; common_init(); @@ -808,22 +831,6 @@ static struct i2c_board_info akita_i2c_board_info[] = { }, }; -static struct nand_bbt_descr sharpsl_akita_bbt = { - .options = 0, - .offs = 4, - .len = 1, - .pattern = scan_ff_pattern -}; - -static struct nand_ecclayout akita_oobinfo = { - .eccbytes = 24, - .eccpos = { - 0x5, 0x1, 0x2, 0x3, 0x6, 0x7, 0x15, 0x11, - 0x12, 0x13, 0x16, 0x17, 0x25, 0x21, 0x22, 0x23, - 0x26, 0x27, 0x35, 0x31, 0x32, 0x33, 0x36, 0x37}, - .oobfree = {{0x08, 0x09}} -}; - static void __init akita_init(void) { spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON; -- GitLab From 902805dbdae016653768f7139d7b3ab36a20cc6d Mon Sep 17 00:00:00 2001 From: Ondrej Zajicek Date: Mon, 26 Oct 2009 23:59:30 +0100 Subject: [PATCH 0489/1165] [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboard Palm Tungsten C keyboard structure has swapped rows/cols gpio structures and does not work. This patch fixes it. Signed-off-by: Ondrej Zajicek Cc: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/palmtc.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index bb2cc0dd44e..0b92291a58f 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -292,10 +292,10 @@ const static unsigned int palmtc_keypad_col_gpios[] = { static struct matrix_keypad_platform_data palmtc_keypad_platform_data = { .keymap_data = &palmtc_keymap_data, - .col_gpios = palmtc_keypad_row_gpios, - .num_col_gpios = 12, - .row_gpios = palmtc_keypad_col_gpios, - .num_row_gpios = 4, + .row_gpios = palmtc_keypad_row_gpios, + .num_row_gpios = ARRAY_SIZE(palmtc_keypad_row_gpios), + .col_gpios = palmtc_keypad_col_gpios, + .num_col_gpios = ARRAY_SIZE(palmtc_keypad_col_gpios), .active_low = 1, .debounce_ms = 20, -- GitLab From b1e19e5601277845b4f17ecd7c9ba04f73ee11aa Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Tue, 3 Nov 2009 00:25:53 +0900 Subject: [PATCH 0490/1165] nilfs2: fix dirty page accounting leak causing hang at write MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bruno Prémont and Dunphy, Bill noticed me that NILFS will certainly hang on ARM-based targets. I found this was caused by an underflow of dirty pages counter. A b-tree cache routine was marking page dirty without adjusting page account information. This fixes the dirty page accounting leak and resolves the hang on arm-based targets. Reported-by: Bruno Prémont Reported-by: Dunphy, Bill Signed-off-by: Ryusuke Konishi Tested-by: Bruno Prémont Cc: stable --- fs/nilfs2/btnode.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c index 5941958f1e4..435864ce06b 100644 --- a/fs/nilfs2/btnode.c +++ b/fs/nilfs2/btnode.c @@ -276,8 +276,7 @@ void nilfs_btnode_commit_change_key(struct address_space *btnc, "invalid oldkey %lld (newkey=%lld)", (unsigned long long)oldkey, (unsigned long long)newkey); - if (!test_set_buffer_dirty(obh) && TestSetPageDirty(opage)) - BUG(); + nilfs_btnode_mark_dirty(obh); spin_lock_irq(&btnc->tree_lock); radix_tree_delete(&btnc->page_tree, oldkey); -- GitLab From aeda7f6343e6375a832e52ff5ed389c115023ca5 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 2 Nov 2009 15:08:13 +0900 Subject: [PATCH 0491/1165] nilfs2: fix irregular checkpoint creation due to data flush When nilfs flushes out dirty data to reduce memory pressure, creation of checkpoints is wrongly postponed. This bug causes irregular checkpoint creation especially in small footprint systems. To correct this issue, a timer for the checkpoint creation has to be continued if a log writer does not create a checkpoint. This will do the correction. Signed-off-by: Ryusuke Konishi --- fs/nilfs2/segment.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c index 683df89dbae..6eff66a070d 100644 --- a/fs/nilfs2/segment.c +++ b/fs/nilfs2/segment.c @@ -2468,17 +2468,22 @@ static void nilfs_segctor_notify(struct nilfs_sc_info *sci, /* Clear requests (even when the construction failed) */ spin_lock(&sci->sc_state_lock); - sci->sc_state &= ~NILFS_SEGCTOR_COMMIT; - if (req->mode == SC_LSEG_SR) { + sci->sc_state &= ~NILFS_SEGCTOR_COMMIT; sci->sc_seq_done = req->seq_accepted; nilfs_segctor_wakeup(sci, req->sc_err ? : req->sb_err); sci->sc_flush_request = 0; - } else if (req->mode == SC_FLUSH_FILE) - sci->sc_flush_request &= ~FLUSH_FILE_BIT; - else if (req->mode == SC_FLUSH_DAT) - sci->sc_flush_request &= ~FLUSH_DAT_BIT; + } else { + if (req->mode == SC_FLUSH_FILE) + sci->sc_flush_request &= ~FLUSH_FILE_BIT; + else if (req->mode == SC_FLUSH_DAT) + sci->sc_flush_request &= ~FLUSH_DAT_BIT; + /* re-enable timer if checkpoint creation was not done */ + if (sci->sc_timer && (sci->sc_state & NILFS_SEGCTOR_COMMIT) && + time_before(jiffies, sci->sc_timer->expires)) + add_timer(sci->sc_timer); + } spin_unlock(&sci->sc_state_lock); } -- GitLab From 05b4358ad564d7a6a51b3717afe771d36711e9c4 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 14 Sep 2009 01:20:35 +0900 Subject: [PATCH 0492/1165] nilfs2: add zero-fill for new btree node buffers Adds missing initialization of newly allocated b-tree node buffers. This avoids garbage data to be mixed in b-tree node blocks. Signed-off-by: Ryusuke Konishi --- fs/nilfs2/btnode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c index 435864ce06b..84c25382f8e 100644 --- a/fs/nilfs2/btnode.c +++ b/fs/nilfs2/btnode.c @@ -87,6 +87,7 @@ int nilfs_btnode_submit_block(struct address_space *btnc, __u64 blocknr, brelse(bh); BUG(); } + memset(bh->b_data, 0, 1 << inode->i_blkbits); bh->b_bdev = NILFS_I_NILFS(inode)->ns_bdev; bh->b_blocknr = blocknr; set_buffer_mapped(bh); -- GitLab From c482ae4dcf23fd241321595d71bbe8aee33eabf5 Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 2 Nov 2009 14:02:21 -0500 Subject: [PATCH 0493/1165] [ARM] pxa: fix resume failure by saving/restoring IPRx registers Since interrupt handler is changed to use interrupt priority, we also need to save and restore these interrupt controller registers in suspend/resume routine. Signed-off-by: Haojian Zhuang Tested-by: Daniel Mack Tested-by: Pavel Machek Tested-by: Robert Jarzmik Acked-by: Pavel Machek Signed-off-by: Eric Miao --- arch/arm/mach-pxa/irq.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index d694ce28966..6112af431fa 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -25,6 +25,8 @@ #include "generic.h" +#define MAX_INTERNAL_IRQS 128 + #define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) #define _ICMR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICMR2 : &ICMR)) #define _ICLR(n) (*((((n) - PXA_IRQ(0)) & ~0x1f) ? &ICLR2 : &ICLR)) @@ -122,6 +124,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) { int irq, i; + BUG_ON(irq_nr > MAX_INTERNAL_IRQS); + pxa_internal_irq_nr = irq_nr; for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) { @@ -149,7 +153,8 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn) } #ifdef CONFIG_PM -static unsigned long saved_icmr[2]; +static unsigned long saved_icmr[MAX_INTERNAL_IRQS/32]; +static unsigned long saved_ipr[MAX_INTERNAL_IRQS]; static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) { @@ -159,6 +164,8 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state) saved_icmr[i] = _ICMR(irq); _ICMR(irq) = 0; } + for (i = 0; i < pxa_internal_irq_nr; i++) + saved_ipr[i] = IPR(i); return 0; } @@ -171,6 +178,8 @@ static int pxa_irq_resume(struct sys_device *dev) _ICMR(irq) = saved_icmr[i]; _ICLR(irq) = 0; } + for (i = 0; i < pxa_internal_irq_nr; i++) + IPR(i) = saved_ipr[i]; ICCR = 1; return 0; -- GitLab From ee1e82cee5e463a885d3c71acb2c769490e6927f Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 2 Nov 2009 21:57:40 -0800 Subject: [PATCH 0494/1165] Input: i8042 - try to get stable CTR value when initializing If user presses keys while i8042 is being initialized there is a chance that keyboard data will be mistaken for results of Read Control Register command causing futher troubles. Work around this issue by reading CTR several times and stop when we get matching results. Reported-and-tested-by: Dave Young Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042.c | 35 ++++++++++++++++++++++++++++------- 1 file changed, 28 insertions(+), 7 deletions(-) diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index a31578170cc..1df02d25aca 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -836,17 +836,32 @@ static int i8042_controller_selftest(void) static int i8042_controller_init(void) { unsigned long flags; + int n = 0; + unsigned char ctr[2]; /* - * Save the CTR for restoral on unload / reboot. + * Save the CTR for restore on unload / reboot. */ - if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { - printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n"); - return -EIO; - } + do { + if (n >= 10) { + printk(KERN_ERR + "i8042.c: Unable to get stable CTR read.\n"); + return -EIO; + } + + if (n != 0) + udelay(50); + + if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) { + printk(KERN_ERR + "i8042.c: Can't read CTR while initializing i8042.\n"); + return -EIO; + } - i8042_initial_ctr = i8042_ctr; + } while (n < 2 || ctr[0] != ctr[1]); + + i8042_initial_ctr = i8042_ctr = ctr[0]; /* * Disable the keyboard interface and interrupt. @@ -895,6 +910,12 @@ static int i8042_controller_init(void) return -EIO; } +/* + * Flush whatever accumulated while we were disabling keyboard port. + */ + + i8042_flush(); + return 0; } @@ -914,7 +935,7 @@ static void i8042_controller_reset(void) i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS; i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT); - if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR)) + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n"); /* -- GitLab From 0baa3de6eb677e5c9b4c38642c6619df2b4ef11f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20H=C3=A4rdeman?= Date: Mon, 2 Nov 2009 21:57:41 -0800 Subject: [PATCH 0495/1165] Input: winbond-cir - select LEDS_TRIGGERS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/input/misc/winbond-cir.c depends on LEDS_TRIGGERS so add an appropriate select to drivers/input/misc/Kconfig Signed-off-by: David Härdeman Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/input/misc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 02f4f8f1db6..a9bb2544b2d 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -227,6 +227,7 @@ config INPUT_WINBOND_CIR depends on X86 && PNP select NEW_LEDS select LEDS_CLASS + select LEDS_TRIGGERS select BITREVERSE help Say Y here if you want to use the IR remote functionality found -- GitLab From 558a5e296a02266ef43d6e933ee35df9976de987 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 2 Nov 2009 22:04:18 -0800 Subject: [PATCH 0496/1165] Input: gpio-keys - use IRQF_SHARED There is nothing that disallows gpio-keys to share it's IRQ line w/ other drivers. Make it use IRQF_SHARED in request_irq(). An example of other driver with which I'd like to share IRQ line for GPIO buttons is ledtrig-gpio. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/gpio_keys.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index a88aff3816a..77d13091425 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -147,6 +147,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) } error = request_irq(irq, gpio_keys_isr, + IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, button->desc ? button->desc : "gpio_keys", bdata); -- GitLab From 6b9de613ae9c79b637e070136585dde029578065 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Mon, 2 Nov 2009 20:36:51 +0100 Subject: [PATCH 0497/1165] sched: Disable SD_PREFER_LOCAL at node level Yanmin Zhang reported that SD_PREFER_LOCAL induces an order of magnitude increase in select_task_rq_fair() overhead while running heavy wakeup benchmarks (tbench and vmark). Since SD_BALANCE_WAKE is off at node level, turn SD_PREFER_LOCAL off as well pending further investigation. Reported-by: Zhang, Yanmin Signed-off-by: Mike Galbraith Cc: Peter Zijlstra LKML-Reference: Signed-off-by: Ingo Molnar --- arch/x86/include/asm/topology.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index d823c245f63..40e37b10c6c 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -143,7 +143,7 @@ extern unsigned long node_remap_size[]; | 1*SD_BALANCE_FORK \ | 0*SD_BALANCE_WAKE \ | 1*SD_WAKE_AFFINE \ - | 1*SD_PREFER_LOCAL \ + | 0*SD_PREFER_LOCAL \ | 0*SD_SHARE_CPUPOWER \ | 0*SD_POWERSAVINGS_BALANCE \ | 0*SD_SHARE_PKG_RESOURCES \ -- GitLab From b84ff7d6f1b7f8a43414e74d972ec4c8f3361db4 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Thu, 29 Oct 2009 11:48:30 +0100 Subject: [PATCH 0498/1165] sched: Fix kthread_bind() by moving the body of kthread_bind() to sched.c Eric Paris reported that commit f685ceacab07d3f6c236f04803e2f2f0dbcc5afb causes boot time PREEMPT_DEBUG complaints. [ 4.590699] BUG: using smp_processor_id() in preemptible [00000000] code: rmmod/1314 [ 4.593043] caller is task_hot+0x86/0xd0 Since kthread_bind() messes with scheduler internals, move the body to sched.c, and lock the runqueue. Reported-by: Eric Paris Signed-off-by: Mike Galbraith Tested-by: Eric Paris Cc: Peter Zijlstra LKML-Reference: <1256813310.7574.3.camel@marge.simson.net> [ v2: fix !SMP build and clean up ] Signed-off-by: Ingo Molnar --- kernel/kthread.c | 23 ----------------------- kernel/sched.c | 32 ++++++++++++++++++++++++++++++++ 2 files changed, 32 insertions(+), 23 deletions(-) diff --git a/kernel/kthread.c b/kernel/kthread.c index 5fe709982ca..ab7ae57773e 100644 --- a/kernel/kthread.c +++ b/kernel/kthread.c @@ -149,29 +149,6 @@ struct task_struct *kthread_create(int (*threadfn)(void *data), } EXPORT_SYMBOL(kthread_create); -/** - * kthread_bind - bind a just-created kthread to a cpu. - * @k: thread created by kthread_create(). - * @cpu: cpu (might not be online, must be possible) for @k to run on. - * - * Description: This function is equivalent to set_cpus_allowed(), - * except that @cpu doesn't need to be online, and the thread must be - * stopped (i.e., just returned from kthread_create()). - */ -void kthread_bind(struct task_struct *k, unsigned int cpu) -{ - /* Must have done schedule() in kthread() before we set_task_cpu */ - if (!wait_task_inactive(k, TASK_UNINTERRUPTIBLE)) { - WARN_ON(1); - return; - } - set_task_cpu(k, cpu); - k->cpus_allowed = cpumask_of_cpu(cpu); - k->rt.nr_cpus_allowed = 1; - k->flags |= PF_THREAD_BOUND; -} -EXPORT_SYMBOL(kthread_bind); - /** * kthread_stop - stop a thread created by kthread_create(). * @k: thread created by kthread_create(). diff --git a/kernel/sched.c b/kernel/sched.c index bf21adb6c9f..5cb7d637e33 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1996,6 +1996,38 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p, p->sched_class->prio_changed(rq, p, oldprio, running); } +/** + * kthread_bind - bind a just-created kthread to a cpu. + * @k: thread created by kthread_create(). + * @cpu: cpu (might not be online, must be possible) for @k to run on. + * + * Description: This function is equivalent to set_cpus_allowed(), + * except that @cpu doesn't need to be online, and the thread must be + * stopped (i.e., just returned from kthread_create()). + * + * Function lives here instead of kthread.c because it messes with + * scheduler internals which require locking. + */ +void kthread_bind(struct task_struct *p, unsigned int cpu) +{ + struct rq *rq = cpu_rq(cpu); + unsigned long flags; + + /* Must have done schedule() in kthread() before we set_task_cpu */ + if (!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)) { + WARN_ON(1); + return; + } + + spin_lock_irqsave(&rq->lock, flags); + set_task_cpu(p, cpu); + p->cpus_allowed = cpumask_of_cpu(cpu); + p->rt.nr_cpus_allowed = 1; + p->flags |= PF_THREAD_BOUND; + spin_unlock_irqrestore(&rq->lock, flags); +} +EXPORT_SYMBOL(kthread_bind); + #ifdef CONFIG_SMP /* * Is this task likely cache-hot: -- GitLab From 9905d1b411946fb3fb228e8c6529fd94afda8a92 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 3 Nov 2009 10:54:58 +0100 Subject: [PATCH 0499/1165] PM / yenta: Split resume into early and late parts (rev. 4) Commit 0c570cdeb8fdfcb354a3e9cd81bfc6a09c19de0c (PM / yenta: Fix cardbus suspend/resume regression) caused resume to fail on systems with two CardBus bridges. While the exact nature of the failure is not known at the moment, it can be worked around by splitting the yenta resume into an early part, executed during the early phase of resume, that will only resume the socket and power it up if there was a card in it during suspend, and a late part, executed during "regular" resume, that will carry out all of the remaining yenta resume operations. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14334, which is a listed regression from 2.6.31. Signed-off-by: Rafael J. Wysocki Acked-by: Dominik Brodowski Reported-by: Stephen J. Gowdy Tested-by: Jose Marino --- drivers/pcmcia/cs.c | 69 ++++++++++++++++++++++------------- drivers/pcmcia/yenta_socket.c | 12 +++++- include/pcmcia/ss.h | 4 ++ 3 files changed, 58 insertions(+), 27 deletions(-) diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 934d4bee39a..698d75cda08 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -98,10 +98,13 @@ EXPORT_SYMBOL(pcmcia_socket_list_rwsem); * These functions check for the appropriate struct pcmcia_soket arrays, * and pass them to the low-level functions pcmcia_{suspend,resume}_socket */ +static int socket_early_resume(struct pcmcia_socket *skt); +static int socket_late_resume(struct pcmcia_socket *skt); static int socket_resume(struct pcmcia_socket *skt); static int socket_suspend(struct pcmcia_socket *skt); -int pcmcia_socket_dev_suspend(struct device *dev) +static void pcmcia_socket_dev_run(struct device *dev, + int (*cb)(struct pcmcia_socket *)) { struct pcmcia_socket *socket; @@ -110,29 +113,34 @@ int pcmcia_socket_dev_suspend(struct device *dev) if (socket->dev.parent != dev) continue; mutex_lock(&socket->skt_mutex); - socket_suspend(socket); + cb(socket); mutex_unlock(&socket->skt_mutex); } up_read(&pcmcia_socket_list_rwsem); +} +int pcmcia_socket_dev_suspend(struct device *dev) +{ + pcmcia_socket_dev_run(dev, socket_suspend); return 0; } EXPORT_SYMBOL(pcmcia_socket_dev_suspend); -int pcmcia_socket_dev_resume(struct device *dev) +void pcmcia_socket_dev_early_resume(struct device *dev) { - struct pcmcia_socket *socket; + pcmcia_socket_dev_run(dev, socket_early_resume); +} +EXPORT_SYMBOL(pcmcia_socket_dev_early_resume); - down_read(&pcmcia_socket_list_rwsem); - list_for_each_entry(socket, &pcmcia_socket_list, socket_list) { - if (socket->dev.parent != dev) - continue; - mutex_lock(&socket->skt_mutex); - socket_resume(socket); - mutex_unlock(&socket->skt_mutex); - } - up_read(&pcmcia_socket_list_rwsem); +void pcmcia_socket_dev_late_resume(struct device *dev) +{ + pcmcia_socket_dev_run(dev, socket_late_resume); +} +EXPORT_SYMBOL(pcmcia_socket_dev_late_resume); +int pcmcia_socket_dev_resume(struct device *dev) +{ + pcmcia_socket_dev_run(dev, socket_resume); return 0; } EXPORT_SYMBOL(pcmcia_socket_dev_resume); @@ -546,29 +554,24 @@ static int socket_suspend(struct pcmcia_socket *skt) return 0; } -/* - * Resume a socket. If a card is present, verify its CIS against - * our cached copy. If they are different, the card has been - * replaced, and we need to tell the drivers. - */ -static int socket_resume(struct pcmcia_socket *skt) +static int socket_early_resume(struct pcmcia_socket *skt) { - int ret; - - if (!(skt->state & SOCKET_SUSPEND)) - return -EBUSY; - skt->socket = dead_socket; skt->ops->init(skt); skt->ops->set_socket(skt, &skt->socket); + if (skt->state & SOCKET_PRESENT) + skt->resume_status = socket_setup(skt, resume_delay); + return 0; +} +static int socket_late_resume(struct pcmcia_socket *skt) +{ if (!(skt->state & SOCKET_PRESENT)) { skt->state &= ~SOCKET_SUSPEND; return socket_insert(skt); } - ret = socket_setup(skt, resume_delay); - if (ret == 0) { + if (skt->resume_status == 0) { /* * FIXME: need a better check here for cardbus cards. */ @@ -596,6 +599,20 @@ static int socket_resume(struct pcmcia_socket *skt) return 0; } +/* + * Resume a socket. If a card is present, verify its CIS against + * our cached copy. If they are different, the card has been + * replaced, and we need to tell the drivers. + */ +static int socket_resume(struct pcmcia_socket *skt) +{ + if (!(skt->state & SOCKET_SUSPEND)) + return -EBUSY; + + socket_early_resume(skt); + return socket_late_resume(skt); +} + static void socket_remove(struct pcmcia_socket *skt) { dev_printk(KERN_NOTICE, &skt->dev, diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index abe0e44c6e9..8be4cc447a1 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -1275,16 +1275,26 @@ static int yenta_dev_resume_noirq(struct device *dev) if (socket->type && socket->type->restore_state) socket->type->restore_state(socket); - return pcmcia_socket_dev_resume(dev); + pcmcia_socket_dev_early_resume(dev); + return 0; +} + +static int yenta_dev_resume(struct device *dev) +{ + pcmcia_socket_dev_late_resume(dev); + return 0; } static struct dev_pm_ops yenta_pm_ops = { .suspend_noirq = yenta_dev_suspend_noirq, .resume_noirq = yenta_dev_resume_noirq, + .resume = yenta_dev_resume, .freeze_noirq = yenta_dev_suspend_noirq, .thaw_noirq = yenta_dev_resume_noirq, + .thaw = yenta_dev_resume, .poweroff_noirq = yenta_dev_suspend_noirq, .restore_noirq = yenta_dev_resume_noirq, + .restore = yenta_dev_resume, }; #define YENTA_PM_OPS (¥ta_pm_ops) diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h index d696a692d94..e0f6feb8588 100644 --- a/include/pcmcia/ss.h +++ b/include/pcmcia/ss.h @@ -262,6 +262,8 @@ struct pcmcia_socket { struct device dev; /* data internal to the socket driver */ void *driver_data; + /* status of the card during resume from a system sleep state */ + int resume_status; }; @@ -280,6 +282,8 @@ extern struct pccard_resource_ops pccard_nonstatic_ops; /* socket drivers are expected to use these callbacks in their .drv struct */ extern int pcmcia_socket_dev_suspend(struct device *dev); +extern void pcmcia_socket_dev_early_resume(struct device *dev); +extern void pcmcia_socket_dev_late_resume(struct device *dev); extern int pcmcia_socket_dev_resume(struct device *dev); /* socket drivers use this callback in their IRQ handler */ -- GitLab From 76b57e613f6006ff525a17876c89326d127cadc9 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 7 Oct 2009 22:37:35 +0200 Subject: [PATCH 0500/1165] PM / Hibernate: Fix blkdev refleaks While cruising through the swsusp code I found few blkdev reference leaks of resume_bdev. swsusp_read: remove blkdev_put altogether. Some fail paths do not do that. swsusp_check: make sure we always put a reference on fail paths software_resume: all fail paths between swsusp_check and swsusp_read omit swsusp_close. Add it in those cases. And since swsusp_read doesn't drop the reference anymore, do it here unconditionally. [rjw: Fixed a small coding style issue.] Signed-off-by: Jiri Slaby Signed-off-by: Rafael J. Wysocki --- kernel/power/hibernate.c | 11 ++++++++--- kernel/power/swap.c | 8 ++++---- 2 files changed, 12 insertions(+), 7 deletions(-) diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 04b3a83d686..04a9e90d248 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -693,21 +693,22 @@ static int software_resume(void) /* The snapshot device should not be opened while we're running */ if (!atomic_add_unless(&snapshot_device_available, -1, 0)) { error = -EBUSY; + swsusp_close(FMODE_READ); goto Unlock; } pm_prepare_console(); error = pm_notifier_call_chain(PM_RESTORE_PREPARE); if (error) - goto Finish; + goto close_finish; error = usermodehelper_disable(); if (error) - goto Finish; + goto close_finish; error = create_basic_memory_bitmaps(); if (error) - goto Finish; + goto close_finish; pr_debug("PM: Preparing processes for restore.\n"); error = prepare_processes(); @@ -719,6 +720,7 @@ static int software_resume(void) pr_debug("PM: Reading hibernation image.\n"); error = swsusp_read(&flags); + swsusp_close(FMODE_READ); if (!error) hibernation_restore(flags & SF_PLATFORM_MODE); @@ -737,6 +739,9 @@ static int software_resume(void) mutex_unlock(&pm_mutex); pr_debug("PM: Resume from disk failed.\n"); return error; +close_finish: + swsusp_close(FMODE_READ); + goto Finish; } late_initcall(software_resume); diff --git a/kernel/power/swap.c b/kernel/power/swap.c index b101cdc4df3..a4388624ed9 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -572,8 +572,6 @@ int swsusp_read(unsigned int *flags_p) error = load_image(&handle, &snapshot, header->pages - 1); release_swap_reader(&handle); - blkdev_put(resume_bdev, FMODE_READ); - if (!error) pr_debug("PM: Image successfully loaded\n"); else @@ -596,7 +594,7 @@ int swsusp_check(void) error = bio_read_page(swsusp_resume_block, swsusp_header, NULL); if (error) - return error; + goto put; if (!memcmp(SWSUSP_SIG, swsusp_header->sig, 10)) { memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10); @@ -604,8 +602,10 @@ int swsusp_check(void) error = bio_write_page(swsusp_resume_block, swsusp_header, NULL); } else { - return -EINVAL; + error = -EINVAL; } + +put: if (error) blkdev_put(resume_bdev, FMODE_READ); else -- GitLab From 4ff277f9e42fa16314045bd124a61519286094c0 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 28 Oct 2009 22:55:33 +0100 Subject: [PATCH 0501/1165] PM / Hibernate: Fix error handling in save_image() There are too many retval variables in save_image(). Thus error return value from snapshot_read_next() may be ignored and only part of the snapshot (successfully) written. Remove 'error' variable, invert the condition in the do-while loop and convert the loop to use only 'ret' variable. Switch the rest of the function to consider only 'ret'. Also make sure we end printed line by \n if an error occurs. Signed-off-by: Jiri Slaby Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki --- kernel/power/swap.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/kernel/power/swap.c b/kernel/power/swap.c index a4388624ed9..afa052b6116 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -314,7 +314,6 @@ static int save_image(struct swap_map_handle *handle, { unsigned int m; int ret; - int error = 0; int nr_pages; int err2; struct bio *bio; @@ -329,26 +328,27 @@ static int save_image(struct swap_map_handle *handle, nr_pages = 0; bio = NULL; do_gettimeofday(&start); - do { + while (1) { ret = snapshot_read_next(snapshot, PAGE_SIZE); - if (ret > 0) { - error = swap_write_page(handle, data_of(*snapshot), - &bio); - if (error) - break; - if (!(nr_pages % m)) - printk("\b\b\b\b%3d%%", nr_pages / m); - nr_pages++; - } - } while (ret > 0); + if (ret <= 0) + break; + ret = swap_write_page(handle, data_of(*snapshot), &bio); + if (ret) + break; + if (!(nr_pages % m)) + printk("\b\b\b\b%3d%%", nr_pages / m); + nr_pages++; + } err2 = wait_on_bio_chain(&bio); do_gettimeofday(&stop); - if (!error) - error = err2; - if (!error) + if (!ret) + ret = err2; + if (!ret) printk("\b\b\b\bdone\n"); + else + printk("\n"); swsusp_show_speed(&start, &stop, nr_to_write, "Wrote"); - return error; + return ret; } /** -- GitLab From bf9fd67a0328d56eff6022f80d4eb88ba6614119 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 28 Oct 2009 22:55:42 +0100 Subject: [PATCH 0502/1165] PM / Hibernate: Add newline to load_image() fail path Finish a line by \n when load_image fails in the middle of loading. Signed-off-by: Jiri Slaby Acked-by: Pavel Machek Signed-off-by: Rafael J. Wysocki --- kernel/power/swap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/power/swap.c b/kernel/power/swap.c index afa052b6116..890f6b11b1d 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -536,7 +536,8 @@ static int load_image(struct swap_map_handle *handle, snapshot_write_finalize(snapshot); if (!snapshot_image_loaded(snapshot)) error = -ENODATA; - } + } else + printk("\n"); swsusp_show_speed(&start, &stop, nr_to_read, "Read"); return error; } -- GitLab From e528e876897217465d5cd7cb28130d8489596e34 Mon Sep 17 00:00:00 2001 From: Romit Dasgupta Date: Wed, 28 Oct 2009 22:56:02 +0100 Subject: [PATCH 0503/1165] PM: Fix warning on suspend errors Fixes the point where we need to complete the power transition when device suspend fails, so that we don't print warnings about devices added to the device hierarchy after a failing suspend. [rjw: Modified changelog.] Signed-off-by: Romit Dasgupta Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index e0dc4071e08..8aa2443182d 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -511,6 +511,7 @@ static void dpm_complete(pm_message_t state) INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); + transition_started = false; while (!list_empty(&dpm_list)) { struct device *dev = to_device(dpm_list.prev); -- GitLab From 2ddac2a6a8f13e95664fe7ad1b728ac84fb1bd07 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 28 Oct 2009 22:56:10 +0100 Subject: [PATCH 0504/1165] PM: Remove some debug messages producing too much noise pm_runtime_idle() is somewhat noisy. Remove debug prints. Signed-off-by: Pavel Machek Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index 38556f6cc22..a770498a74e 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -51,8 +51,6 @@ static int __pm_runtime_idle(struct device *dev) { int retval = 0; - dev_dbg(dev, "__pm_runtime_idle()!\n"); - if (dev->power.runtime_error) retval = -EINVAL; else if (dev->power.idle_notification) @@ -93,8 +91,6 @@ static int __pm_runtime_idle(struct device *dev) wake_up_all(&dev->power.wait_queue); out: - dev_dbg(dev, "__pm_runtime_idle() returns %d!\n", retval); - return retval; } -- GitLab From 58ce48a9de1dd47acb5dc00e2837214d2be1d92a Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 16 Oct 2009 22:22:46 +0200 Subject: [PATCH 0505/1165] Revert "eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit rt2860sta is fine with the patch as is, but iwl3945 isn't (eeepc_rfkill_set() needs to call eeepc_rfkill_hotplug(true) – which means that we're back to causing the rt2860sta panic This reverts commit b56ab33d68638e6aafdbfc694025e8354a628f49. Signed-off-by: Corentin Chary Signed-off-by: Darren Salt Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index d379e74a05d..789d6ae003f 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -150,8 +150,6 @@ struct eeepc_hotk { /* The actual device the driver binds to */ static struct eeepc_hotk *ehotk; -static void eeepc_rfkill_hotplug(bool real); - /* Platform device/driver */ static int eeepc_hotk_thaw(struct device *device); static int eeepc_hotk_restore(struct device *device); @@ -345,16 +343,7 @@ static bool eeepc_wlan_rfkill_blocked(void) static int eeepc_rfkill_set(void *data, bool blocked) { unsigned long asl = (unsigned long)data; - int ret; - - if (asl != CM_ASL_WLAN) - return set_acpi(asl, !blocked); - - /* hack to avoid panic with rt2860sta */ - if (blocked) - eeepc_rfkill_hotplug(false); - ret = set_acpi(asl, !blocked); - return ret; + return set_acpi(asl, !blocked); } static const struct rfkill_ops eeepc_rfkill_ops = { @@ -654,13 +643,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, return 0; } -static void eeepc_rfkill_hotplug(bool real) +static void eeepc_rfkill_hotplug(void) { struct pci_dev *dev; struct pci_bus *bus; - bool blocked = real ? eeepc_wlan_rfkill_blocked() : true; + bool blocked = eeepc_wlan_rfkill_blocked(); - if (real && ehotk->wlan_rfkill) + if (ehotk->wlan_rfkill) rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); mutex_lock(&ehotk->hotplug_lock); @@ -703,7 +692,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) if (event != ACPI_NOTIFY_BUS_CHECK) return; - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); } static void eeepc_hotk_notify(struct acpi_device *device, u32 event) @@ -861,7 +850,7 @@ static int eeepc_hotk_restore(struct device *device) { /* Refresh both wlan rfkill state and pci hotplug */ if (ehotk->wlan_rfkill) - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->bluetooth_rfkill) rfkill_set_sw_state(ehotk->bluetooth_rfkill, @@ -1004,7 +993,7 @@ static void eeepc_rfkill_exit(void) * Refresh pci hotplug in case the rfkill state was changed after * eeepc_unregister_rfkill_notifier() */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->hotplug_slot) pci_hp_deregister(ehotk->hotplug_slot); @@ -1120,7 +1109,7 @@ static int eeepc_rfkill_init(struct device *dev) * Refresh pci hotplug in case the rfkill state was changed during * setup. */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); exit: if (result && result != -ENODEV) -- GitLab From 80f0c895b57f0d936b420de6afea5167a49f62fa Mon Sep 17 00:00:00 2001 From: Luca Niccoli Date: Fri, 16 Oct 2009 22:22:47 +0200 Subject: [PATCH 0506/1165] eeepc-laptop: don't enable camera at startup if it's already on. Switching the camera takes 500ms, checking if it's on is almost free... The BIOS remembers the setting through reboots, so there's good chance the camera is already enabled. Signed-off-by: Luca Niccoli Cc: Corentin Chary Cc: Alan Jenkins Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 789d6ae003f..4226e535273 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -356,7 +356,8 @@ static void __devinit eeepc_enable_camera(void) * If the following call to set_acpi() fails, it's because there's no * camera so we can ignore the error. */ - set_acpi(CM_ASL_CAMERA, 1); + if (get_acpi(CM_ASL_CAMERA) == 0) + set_acpi(CM_ASL_CAMERA, 1); } /* -- GitLab From 7542fa72e26f81bfc5d4119ca6f5bb5dcdc1ef82 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 15 Oct 2009 20:15:17 +0200 Subject: [PATCH 0507/1165] [SCSI] bfa: fix test in bfad_os_fc_host_init() BFA_PORT_ROLE_FCP_IPFC is 0x04 so this always evaluates to true Signed-off-by: Roel Kluin Acked-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfad_im.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/bfa/bfad_im.c b/drivers/scsi/bfa/bfad_im.c index 158c99243c0..55d012a9a66 100644 --- a/drivers/scsi/bfa/bfad_im.c +++ b/drivers/scsi/bfa/bfad_im.c @@ -948,7 +948,7 @@ bfad_os_fc_host_init(struct bfad_im_port_s *im_port) if (bfad_supported_fc4s & (BFA_PORT_ROLE_FCP_IM | BFA_PORT_ROLE_FCP_TM)) /* For FCP type 0x08 */ fc_host_supported_fc4s(host)[2] = 1; - if (bfad_supported_fc4s | BFA_PORT_ROLE_FCP_IPFC) + if (bfad_supported_fc4s & BFA_PORT_ROLE_FCP_IPFC) /* For LLC/SNAP type 0x05 */ fc_host_supported_fc4s(host)[3] = 0x20; /* For fibre channel services type 0x20 */ -- GitLab From e8edb3cbd7dd8acf6c748a02d06ec1d82c4124ea Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Tue, 3 Nov 2009 10:32:03 -0500 Subject: [PATCH 0508/1165] crypto: padlock-aes - Use the correct mask when checking whether copying is required Masking with PAGE_SIZE is just wrong... Signed-off-by: Chuck Ebbert Signed-off-by: Herbert Xu --- drivers/crypto/padlock-aes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c index a9952b1236b..84c51e17726 100644 --- a/drivers/crypto/padlock-aes.c +++ b/drivers/crypto/padlock-aes.c @@ -236,7 +236,7 @@ static inline void ecb_crypt(const u8 *in, u8 *out, u32 *key, /* Padlock in ECB mode fetches at least ecb_fetch_bytes of data. * We could avoid some copying here but it's probably not worth it. */ - if (unlikely(((unsigned long)in & PAGE_SIZE) + ecb_fetch_bytes > PAGE_SIZE)) { + if (unlikely(((unsigned long)in & ~PAGE_MASK) + ecb_fetch_bytes > PAGE_SIZE)) { ecb_crypt_copy(in, out, key, cword, count); return; } @@ -248,7 +248,7 @@ static inline u8 *cbc_crypt(const u8 *in, u8 *out, u32 *key, u8 *iv, struct cword *cword, int count) { /* Padlock in CBC mode fetches at least cbc_fetch_bytes of data. */ - if (unlikely(((unsigned long)in & PAGE_SIZE) + cbc_fetch_bytes > PAGE_SIZE)) + if (unlikely(((unsigned long)in & ~PAGE_MASK) + cbc_fetch_bytes > PAGE_SIZE)) return cbc_crypt_copy(in, out, key, iv, cword, count); return rep_xcrypt_cbc(in, out, key, iv, cword, count); -- GitLab From 1d510750941a53a1d3049c1d33c75d6dfcd78618 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Tue, 3 Nov 2009 10:11:14 +0000 Subject: [PATCH 0509/1165] Correct nr_processes() when CPUs have been unplugged nr_processes() returns the sum of the per cpu counter process_counts for all online CPUs. This counter is incremented for the current CPU on fork() and decremented for the current CPU on exit(). Since a process does not necessarily fork and exit on the same CPU the process_count for an individual CPU can be either positive or negative and effectively has no meaning in isolation. Therefore calculating the sum of process_counts over only the online CPUs omits the processes which were started or stopped on any CPU which has since been unplugged. Only the sum of process_counts across all possible CPUs has meaning. The only caller of nr_processes() is proc_root_getattr() which calculates the number of links to /proc as stat->nlink = proc_root.nlink + nr_processes(); You don't have to be all that unlucky for the nr_processes() to return a negative value leading to a negative number of links (or rather, an apparently enormous number of links). If this happens then you can get failures where things like "ls /proc" start to fail because they got an -EOVERFLOW from some stat() call. Example with some debugging inserted to show what goes on: # ps haux|wc -l nr_processes: CPU0: 90 nr_processes: CPU1: 1030 nr_processes: CPU2: -900 nr_processes: CPU3: -136 nr_processes: TOTAL: 84 proc_root_getattr. nlink 12 + nr_processes() 84 = 96 84 # echo 0 >/sys/devices/system/cpu/cpu1/online # ps haux|wc -l nr_processes: CPU0: 85 nr_processes: CPU2: -901 nr_processes: CPU3: -137 nr_processes: TOTAL: -953 proc_root_getattr. nlink 12 + nr_processes() -953 = -941 75 # stat /proc/ nr_processes: CPU0: 84 nr_processes: CPU2: -901 nr_processes: CPU3: -137 nr_processes: TOTAL: -954 proc_root_getattr. nlink 12 + nr_processes() -954 = -942 File: `/proc/' Size: 0 Blocks: 0 IO Block: 1024 directory Device: 3h/3d Inode: 1 Links: 4294966354 Access: (0555/dr-xr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2009-11-03 09:06:55.000000000 +0000 Modify: 2009-11-03 09:06:55.000000000 +0000 Change: 2009-11-03 09:06:55.000000000 +0000 I'm not 100% convinced that the per_cpu regions remain valid for offline CPUs, although my testing suggests that they do. If not then I think the correct solution would be to aggregate the process_count for a given CPU into a global base value in cpu_down(). This bug appears to pre-date the transition to git and it looks like it may even have been present in linux-2.6.0-test7-bk3 since it looks like the code Rusty patched in http://lwn.net/Articles/64773/ was already wrong. Signed-off-by: Ian Campbell Cc: Andrew Morton Cc: Rusty Russell Signed-off-by: Linus Torvalds --- kernel/fork.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/fork.c b/kernel/fork.c index 4c20fff8c13..166b8c49257 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -91,7 +91,7 @@ int nr_processes(void) int cpu; int total = 0; - for_each_online_cpu(cpu) + for_each_possible_cpu(cpu) total += per_cpu(process_counts, cpu); return total; -- GitLab From 2f5d46d2f669a6d0083e50f457ce4e32fb90568c Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 6 Jul 2009 12:15:12 +0200 Subject: [PATCH 0510/1165] avr32: add two new at91 to cpu.h definition Somme common drivers will need those at91 cpu_is_xxx() definitions. As at91sam9g10 and at91sam9g45 are on the way to linus' tree, here is the patch that adds those chips to cpu.h in AVR32 architecture. Signed-off-by: Nicolas Ferre Signed-off-by: Haavard Skinnemoen --- arch/avr32/mach-at32ap/include/mach/cpu.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h index 44d0bfa1f40..c253e9bb561 100644 --- a/arch/avr32/mach-at32ap/include/mach/cpu.h +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -31,5 +31,7 @@ #define cpu_is_at91sam9263() (0) #define cpu_is_at91sam9rl() (0) #define cpu_is_at91cap9() (0) +#define cpu_is_at91sam9g10() (0) +#define cpu_is_at91sam9g45() (0) #endif /* __ASM_ARCH_CPU_H */ -- GitLab From d8951adeba05719b9efd7ce875a3294ffdbb37ea Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 21 Sep 2009 12:03:56 +0200 Subject: [PATCH 0511/1165] at91: at91sam9g45 family: identify several chip versions cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds the capacity to differentiate Engineering Samples and final lots through the inclusion of at91_cpu_fully_identify() and the related chip IDs with chip version field preserved. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Hans-Christian Egtvedt --- arch/arm/mach-at91/include/mach/cpu.h | 9 +++++++++ arch/avr32/mach-at32ap/include/mach/cpu.h | 1 + 2 files changed, 10 insertions(+) diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 34a9502c48b..c22df30ed5e 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -25,6 +25,8 @@ #define ARCH_ID_AT91SAM9G20 0x019905a0 #define ARCH_ID_AT91SAM9RL64 0x019b03a0 #define ARCH_ID_AT91SAM9G45 0x819b05a0 +#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */ +#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */ #define ARCH_ID_AT91CAP9 0x039A03A0 #define ARCH_ID_AT91SAM9XE128 0x329973a0 @@ -41,6 +43,11 @@ static inline unsigned long at91_cpu_identify(void) return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); } +static inline unsigned long at91_cpu_fully_identify(void) +{ + return at91_sys_read(AT91_DBGU_CIDR); +} + #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 #define ARCH_EXID_AT91SAM9G45 0x00000004 @@ -118,8 +125,10 @@ static inline unsigned long at91cap9_rev_identify(void) #ifdef CONFIG_ARCH_AT91SAM9G45 #define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45) +#define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES) #else #define cpu_is_at91sam9g45() (0) +#define cpu_is_at91sam9g45es() (0) #endif #ifdef CONFIG_ARCH_AT91CAP9 diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h index c253e9bb561..9c96a130f3a 100644 --- a/arch/avr32/mach-at32ap/include/mach/cpu.h +++ b/arch/avr32/mach-at32ap/include/mach/cpu.h @@ -33,5 +33,6 @@ #define cpu_is_at91cap9() (0) #define cpu_is_at91sam9g10() (0) #define cpu_is_at91sam9g45() (0) +#define cpu_is_at91sam9g45es() (0) #endif /* __ASM_ARCH_CPU_H */ -- GitLab From 7825cf10e31c64ece3cac66fb01a742f1094da51 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 20 Oct 2009 15:28:21 +0900 Subject: [PATCH 0512/1165] xen/hvc: make sure console output is always emitted, with explicit polling We never want to rely on the hvc workqueue to emit output, because the most interesting output is when the kernel is broken. This will improve oops/crash/console message for better debugging. Instead, we force-poll until all output is emitted. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel --- drivers/char/hvc_xen.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index eba999f8598..a6ee32b599a 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -55,7 +55,7 @@ static inline void notify_daemon(void) notify_remote_via_evtchn(xen_start_info->console.domU.evtchn); } -static int write_console(uint32_t vtermno, const char *data, int len) +static int __write_console(const char *data, int len) { struct xencons_interface *intf = xencons_interface(); XENCONS_RING_IDX cons, prod; @@ -76,6 +76,29 @@ static int write_console(uint32_t vtermno, const char *data, int len) return sent; } +static int write_console(uint32_t vtermno, const char *data, int len) +{ + int ret = len; + + /* + * Make sure the whole buffer is emitted, polling if + * necessary. We don't ever want to rely on the hvc daemon + * because the most interesting console output is when the + * kernel is crippled. + */ + while (len) { + int sent = __write_console(data, len); + + data += sent; + len -= sent; + + if (unlikely(len)) + HYPERVISOR_sched_op(SCHEDOP_yield, NULL); + } + + return ret; +} + static int read_console(uint32_t vtermno, char *buf, int len) { struct xencons_interface *intf = xencons_interface(); -- GitLab From 82d6469916c6fcfa345636a49004c9d1753905d1 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 22 Oct 2009 16:41:15 -0700 Subject: [PATCH 0513/1165] xen: mask extended topology info in cpuid A Xen guest never needs to know about extended topology, and knowing would just confuse it. This patch just zeros ebx in leaf 0xb which indicates no topology info, preventing a crash under Xen on cpus which support this leaf. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel --- arch/x86/xen/enlighten.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 23a4d80fb39..dfbf70e6586 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -178,6 +178,7 @@ static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0; static void xen_cpuid(unsigned int *ax, unsigned int *bx, unsigned int *cx, unsigned int *dx) { + unsigned maskebx = ~0; unsigned maskecx = ~0; unsigned maskedx = ~0; @@ -185,9 +186,16 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, * Mask out inconvenient features, to try and disable as many * unsupported kernel subsystems as possible. */ - if (*ax == 1) { + switch (*ax) { + case 1: maskecx = cpuid_leaf1_ecx_mask; maskedx = cpuid_leaf1_edx_mask; + break; + + case 0xb: + /* Suppress extended topology stuff */ + maskebx = 0; + break; } asm(XEN_EMULATE_PREFIX "cpuid" @@ -197,6 +205,7 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, "=d" (*dx) : "0" (*ax), "2" (*cx)); + *bx &= maskebx; *cx &= maskecx; *dx &= maskedx; } -- GitLab From 8c4db3355b0fcc9ad77431f15b955efa0645b5d0 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 3 Nov 2009 20:18:44 +0100 Subject: [PATCH 0514/1165] backing-dev: bdi sb prune should be in the unregister path, not destroy Commit 592b09a42fc3ae6737a0f3ecf4fee42ecd0296f8 was different from the tested path, in that it moved the bdi super_block prune from unregister to destroy context. This doesn't fully fix the sync hang bug on unexpected device removal, as need to prune the bdi cache pointer before killing flusher thread. Tested-by: Artur Skawina Signed-off-by: Jens Axboe --- mm/backing-dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 1065b715ef6..11aee09dd2a 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -628,6 +628,8 @@ static void bdi_prune_sb(struct backing_dev_info *bdi) void bdi_unregister(struct backing_dev_info *bdi) { if (bdi->dev) { + bdi_prune_sb(bdi); + if (!bdi_cap_flush_forker(bdi)) bdi_wb_shutdown(bdi); bdi_debug_unregister(bdi); @@ -697,7 +699,6 @@ void bdi_destroy(struct backing_dev_info *bdi) spin_unlock(&inode_lock); } - bdi_prune_sb(bdi); bdi_unregister(bdi); for (i = 0; i < NR_BDI_STAT_ITEMS; i++) -- GitLab From e6ec4fe24572ee265723d895ec4159e5559c8266 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 3 Nov 2009 20:21:35 +0100 Subject: [PATCH 0515/1165] cfq-iosched: fix bad return value cfq_should_preempt() Commit a6151c3a5c8e1ff5a28450bc8d6a99a2a0add0a7 inadvertently reversed a preempt condition check, potentially causing a performance regression. Make the meta check correct again. Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 069a61017c0..5802e322b7a 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -2051,7 +2051,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * it's a metadata request and the current queue is doing regular IO. */ if (rq_is_meta(rq) && !cfqq->meta_pending) - return false; + return true; /* * Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice. -- GitLab From 4b27e1bb442e964903f8a3fa6bdf33a602dc0941 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Tue, 3 Nov 2009 20:25:02 +0100 Subject: [PATCH 0516/1165] cfq-iosched: limit coop preemption CFQ has an optimization for cooperated applications. if several io-context have close requests, they will get boost. But the optimization get abused. Considering thread a, b, which work on one file. a reads sectors s, s+2, s+4, ...; b reads sectors s+1, s+3, s +5, ... Both a and b are sequential read, so they can open idle window. a reads a sector s and goes to idle window and wakeup b. b reads sector s+1, since in current implementation, cfq_should_preempt() thinks a and b are cooperators, b will preempt a. b then reads sector s+1 and goes to idle window and wakeup a. for the same reason, a will preempt b and reads s+2. a and b will continue the circle. The circle will be very long, and a and b will occupy whole disk queue. Other applications will nearly have no chance to run. Fix this limiting coop preempt until a queue is scheduled normally again. Signed-off-by: Shaohua Li Acked-by: Jeff Moyer Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 5802e322b7a..aa1e9535e35 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -196,6 +196,7 @@ enum cfqq_state_flags { CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */ CFQ_CFQQ_FLAG_sync, /* synchronous queue */ CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */ + CFQ_CFQQ_FLAG_coop_preempt, /* coop preempt */ }; #define CFQ_CFQQ_FNS(name) \ @@ -222,6 +223,7 @@ CFQ_CFQQ_FNS(prio_changed); CFQ_CFQQ_FNS(slice_new); CFQ_CFQQ_FNS(sync); CFQ_CFQQ_FNS(coop); +CFQ_CFQQ_FNS(coop_preempt); #undef CFQ_CFQQ_FNS #define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \ @@ -945,10 +947,13 @@ static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd, { if (!cfqq) { cfqq = cfq_get_next_queue(cfqd); - if (cfqq) + if (cfqq && !cfq_cfqq_coop_preempt(cfqq)) cfq_clear_cfqq_coop(cfqq); } + if (cfqq) + cfq_clear_cfqq_coop_preempt(cfqq); + __cfq_set_active_queue(cfqd, cfqq); return cfqq; } @@ -2066,8 +2071,16 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * if this request is as-good as one we would expect from the * current cfqq, let it preempt */ - if (cfq_rq_close(cfqd, rq)) + if (cfq_rq_close(cfqd, rq) && (!cfq_cfqq_coop(new_cfqq) || + cfqd->busy_queues == 1)) { + /* + * Mark new queue coop_preempt, so its coop flag will not be + * cleared when new queue gets scheduled at the very first time + */ + cfq_mark_cfqq_coop_preempt(new_cfqq); + cfq_mark_cfqq_coop(new_cfqq); return true; + } return false; } -- GitLab From e65cc194f7628ecaa02462f22f42fb09b50dcd49 Mon Sep 17 00:00:00 2001 From: Mark Nelson Date: Tue, 3 Nov 2009 20:06:48 +1100 Subject: [PATCH 0517/1165] ahci: Enable SB600 64bit DMA on MSI K9A2 Platinum v2 Like the Asus M2A-VM, MSI's K9A2 Platinum (MS-7376) can also support 64bit DMA. It is a new enough board that all the BIOS releases work correctly with 64bit DMA enabled. Signed-off-by: Mark Nelson Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 40 +++++++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 5 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index a06f5d6375a..a3241a1a710 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2718,6 +2718,30 @@ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev) }, .driver_data = "20071026", /* yyyymmdd */ }, + /* + * All BIOS versions for the MSI K9A2 Platinum (MS-7376) + * support 64bit DMA. + * + * BIOS versions earlier than 1.5 had the Manufacturer DMI + * fields as "MICRO-STAR INTERANTIONAL CO.,LTD". + * This spelling mistake was fixed in BIOS version 1.5, so + * 1.5 and later have the Manufacturer as + * "MICRO-STAR INTERNATIONAL CO.,LTD". + * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER". + * + * BIOS versions earlier than 1.9 had a Board Product Name + * DMI field of "MS-7376". This was changed to be + * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still + * match on DMI_BOARD_NAME of "MS-7376". + */ + { + .ident = "MSI K9A2 Platinum", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, + "MICRO-STAR INTER"), + DMI_MATCH(DMI_BOARD_NAME, "MS-7376"), + }, + }, { } }; const struct dmi_system_id *match; @@ -2729,18 +2753,24 @@ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev) !match) return false; + if (!match->driver_data) + goto enable_64bit; + dmi_get_date(DMI_BIOS_DATE, &year, &month, &date); snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date); - if (strcmp(buf, match->driver_data) >= 0) { - dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n", - match->ident); - return true; - } else { + if (strcmp(buf, match->driver_data) >= 0) + goto enable_64bit; + else { dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, " "forcing 32bit DMA, update BIOS\n", match->ident); return false; } + +enable_64bit: + dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n", + match->ident); + return true; } static bool ahci_broken_system_poweroff(struct pci_dev *pdev) -- GitLab From a1104016ce8f7750ecd8ca6129786bc549aa5c38 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:41:47 +0200 Subject: [PATCH 0518/1165] drivers/ata/libata: Move dereference after NULL test In each case, if the NULL test on qc is needed, then the derefernce should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index d7f0f1b1ae3..dc72690ed5d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4919,10 +4919,11 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) */ void ata_qc_free(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; + struct ata_port *ap; unsigned int tag; WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + ap = qc->ap; qc->flags = 0; tag = qc->tag; @@ -4934,11 +4935,13 @@ void ata_qc_free(struct ata_queued_cmd *qc) void __ata_qc_complete(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; - struct ata_link *link = qc->dev->link; + struct ata_port *ap; + struct ata_link *link; WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE)); + ap = qc->ap; + link = qc->dev->link; if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); -- GitLab From f38e35b43f2924b3b4e51147b7193f32e9276db4 Mon Sep 17 00:00:00 2001 From: "JosephChan@via.com.tw" Date: Mon, 2 Nov 2009 19:36:08 +0800 Subject: [PATCH 0519/1165] sata_via: Remove redundant device ID for VIA VT8261 Just remove redundant device ID for VIA VT8261. The device ID 0x9000 and 0x9040 are redundant (for VT8261). The 0x9040 is reserved for other usage. Signed-off-by: Joseph Chan Signed-off-by: Jeff Garzik --- drivers/ata/sata_via.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index bdd43c7f432..02efd9a83d2 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -93,7 +93,6 @@ static const struct pci_device_id svia_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x7372), vt6420 }, { PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */ { PCI_VDEVICE(VIA, 0x9000), vt8251 }, - { PCI_VDEVICE(VIA, 0x9040), vt8251 }, { } /* terminate list */ }; -- GitLab From b419148e567728f6af0c3b01965c1cc141e3e13a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 3 Nov 2009 11:37:49 -0800 Subject: [PATCH 0520/1165] Linux 2.6.32-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9425d1de54c..b4c04f734e5 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 32 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- GitLab From 109f55651954def97fa41ee71c464d268c512ab0 Mon Sep 17 00:00:00 2001 From: Mingming Date: Tue, 10 Nov 2009 10:48:08 -0500 Subject: [PATCH 0521/1165] ext4: fix ext4_ext_direct_IO()'s return value after converting uninit extents After a direct I/O request covering an uninitalized extent (i.e., created using the fallocate system call) or a hole in a file, ext4 will convert the uninitialized extent so it is marked as initialized by calling ext4_convert_unwritten_extents(). This function returns zero on success. This return value was getting returned by ext4_direct_IO(); however the file system's direct_IO function is supposed to return the number of bytes read or written on a success. By returning zero, it confused the direct I/O code into falling back to buffered I/O unnecessarily. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 1 + fs/ext4/inode.c | 10 +++++++--- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 10539e36428..441716f33b4 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3519,6 +3519,7 @@ retry: * * This function is called from the direct IO end io call back * function, to convert the fallocated extents after IO is completed. + * Returns 0 on success. */ int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset, loff_t len) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index d1ec698a91d..12d727f8fed 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3772,13 +3772,17 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { ext4_free_io_end(iocb->private); iocb->private = NULL; - } else if (ret > 0) + } else if (ret > 0) { + int err; /* * for non AIO case, since the IO is already * completed, we could do the convertion right here */ - ret = ext4_convert_unwritten_extents(inode, - offset, ret); + err = ext4_convert_unwritten_extents(inode, + offset, ret); + if (err < 0) + ret = err; + } return ret; } -- GitLab From 5f5249507e4b5c4fc0f9c93f33d133d8c95f47e1 Mon Sep 17 00:00:00 2001 From: Mingming Date: Tue, 10 Nov 2009 10:48:04 -0500 Subject: [PATCH 0522/1165] ext4: skip conversion of uninit extents after direct IO if there isn't any At the end of direct I/O operation, ext4_ext_direct_IO() always called ext4_convert_unwritten_extents(), regardless of whether there were any unwritten extents involved in the I/O or not. This commit adds a state flag so that ext4_ext_direct_IO() only calls ext4_convert_unwritten_extents() when necessary. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/ext4.h | 1 + fs/ext4/extents.c | 22 +++++++++++++++++----- fs/ext4/inode.c | 4 +++- 3 files changed, 21 insertions(+), 6 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 00d153f2f26..8825515eedd 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -322,6 +322,7 @@ static inline __u32 ext4_mask_flags(umode_t mode, __u32 flags) #define EXT4_STATE_NO_EXPAND 0x00000008 /* No space for expansion */ #define EXT4_STATE_DA_ALLOC_CLOSE 0x00000010 /* Alloc DA blks on close */ #define EXT4_STATE_EXT_MIGRATE 0x00000020 /* Inode is migrating */ +#define EXT4_STATE_DIO_UNWRITTEN 0x00000040 /* need convert on dio done*/ /* Used to pass group descriptor data when online resize is done */ struct ext4_new_group_input { diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 441716f33b4..e991ae2b461 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3048,12 +3048,18 @@ ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode, ret = ext4_split_unwritten_extents(handle, inode, path, iblock, max_blocks, flags); - /* flag the io_end struct that we need convert when IO done */ + /* + * Flag the inode(non aio case) or end_io struct (aio case) + * that this IO needs to convertion to written when IO is + * completed + */ if (io) io->flag = DIO_AIO_UNWRITTEN; + else + EXT4_I(inode)->i_state |= EXT4_STATE_DIO_UNWRITTEN; goto out; } - /* DIO end_io complete, convert the filled extent to written */ + /* async DIO end_io complete, convert the filled extent to written */ if (flags == EXT4_GET_BLOCKS_DIO_CONVERT_EXT) { ret = ext4_convert_unwritten_extents_dio(handle, inode, path); @@ -3295,10 +3301,16 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode, * To avoid unecessary convertion for every aio dio rewrite * to the mid of file, here we flag the IO that is really * need the convertion. - * + * For non asycn direct IO case, flag the inode state + * that we need to perform convertion when IO is done. */ - if (io && flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) - io->flag = DIO_AIO_UNWRITTEN; + if (flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) { + if (io) + io->flag = DIO_AIO_UNWRITTEN; + else + EXT4_I(inode)->i_state |= + EXT4_STATE_DIO_UNWRITTEN;; + } } err = ext4_ext_insert_extent(handle, inode, path, &newex, flags); if (err) { diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 12d727f8fed..a9ed2bce74d 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3772,7 +3772,8 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) { ext4_free_io_end(iocb->private); iocb->private = NULL; - } else if (ret > 0) { + } else if (ret > 0 && (EXT4_I(inode)->i_state & + EXT4_STATE_DIO_UNWRITTEN)) { int err; /* * for non AIO case, since the IO is already @@ -3782,6 +3783,7 @@ static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb, offset, ret); if (err < 0) ret = err; + EXT4_I(inode)->i_state &= ~EXT4_STATE_DIO_UNWRITTEN; } return ret; } -- GitLab From 4b70df181611012a3556f017b57dfcef7e1d279f Mon Sep 17 00:00:00 2001 From: Mingming Date: Tue, 3 Nov 2009 14:44:54 -0500 Subject: [PATCH 0523/1165] ext4: code clean up for dio fallocate handling The ext4_debug() call in ext4_end_io_dio() should be moved after the check to make sure that io_end is non-NULL. The comment above ext4_get_block_dio_write() ("Maximum number of blocks...") is a duplicate; the original and correct comment is above the #define DIO_MAX_BLOCKS up above. Based on review comments from Curt Wohlgemuth. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a9ed2bce74d..2c8caa51add 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3446,8 +3446,6 @@ out: return ret; } -/* Maximum number of blocks we map for direct IO at once. */ - static int ext4_get_block_dio_write(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create) { @@ -3655,13 +3653,14 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, ext4_io_end_t *io_end = iocb->private; struct workqueue_struct *wq; + /* if not async direct IO or dio with 0 bytes write, just return */ + if (!io_end || !size) + return; + ext_debug("ext4_end_io_dio(): io_end 0x%p" "for inode %lu, iocb 0x%p, offset %llu, size %llu\n", iocb->private, io_end->inode->i_ino, iocb, offset, size); - /* if not async direct IO or dio with 0 bytes write, just return */ - if (!io_end || !size) - return; /* if not aio dio with unwritten extents, just free io and return */ if (io_end->flag != DIO_AIO_UNWRITTEN){ -- GitLab From 560235857fb79da48d36e8f866a0ee3b10a232bf Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 2 Aug 2009 10:47:27 +0200 Subject: [PATCH 0524/1165] arch/m32r: Use DIV_ROUND_CLOSEST The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // Signed-off-by: Julia Lawall Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/time.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c index e7fee0f198d..9cedcef1157 100644 --- a/arch/m32r/kernel/time.c +++ b/arch/m32r/kernel/time.c @@ -75,7 +75,7 @@ u32 arch_gettimeoffset(void) count = 0; count = (latch - count) * TICK_SIZE; - elapsed_time = (count + latch / 2) / latch; + elapsed_time = DIV_ROUND_CLOSEST(count, latch); /* NOTE: LATCH is equal to the "interval" value (= reload count). */ #else /* CONFIG_SMP */ @@ -93,7 +93,7 @@ u32 arch_gettimeoffset(void) p_count = count; count = (latch - count) * TICK_SIZE; - elapsed_time = (count + latch / 2) / latch; + elapsed_time = DIV_ROUND_CLOSEST(count, latch); /* NOTE: LATCH is equal to the "interval" value (= reload count). */ #endif /* CONFIG_SMP */ #elif defined(CONFIG_CHIP_M32310) @@ -211,7 +211,7 @@ void __init time_init(void) bus_clock = boot_cpu_data.bus_clock; divide = boot_cpu_data.timer_divide; - latch = (bus_clock/divide + HZ / 2) / HZ; + latch = DIV_ROUND_CLOSEST(bus_clock/divide, HZ); printk("Timer start : latch = %ld\n", latch); -- GitLab From e968b8d404ae8ab4ef218cd145f6dcb71e65154b Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Mon, 5 Oct 2009 00:10:55 +0900 Subject: [PATCH 0525/1165] m32r: add NOTES to vmlinux.lds.S to remove .note.gnu.build-id section Building with --build-id option, .note.gnu.build-id section is added to vmlinux.bin. But some old buggy binutils creates a huge vmlinux.bin, and a bootloader fails to boot its zImage as well. This patch adds a NOTES macro to a linker script vmlinux.ld.S to put .note.gnu.build-id section into .note section. Then, the .note section will be removed, because "-R .note" option is specified in OBJCOPYFLAGS to make a vmlinux.bin binary. Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/vmlinux.lds.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 8ceb6181d80..7da94eaa082 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -42,6 +42,8 @@ SECTIONS _etext = .; /* End of text section */ EXCEPTION_TABLE(16) + NOTES + RODATA RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE) _edata = .; /* End of data section */ -- GitLab From 337214e8c6b0c777713b2483749f9c03102a416c Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Thu, 15 Oct 2009 09:21:56 +0900 Subject: [PATCH 0526/1165] m32r: bzip2/lzma kernel compression support - Support bzip2 and lzma kernel compression for m32r. - Clean up arch/m32r/boot/compressed/misc.c. Signed-off-by: Hirokazu Takata --- arch/m32r/Kconfig | 3 + arch/m32r/boot/compressed/Makefile | 16 +++- arch/m32r/boot/compressed/misc.c | 143 ++++++----------------------- 3 files changed, 42 insertions(+), 120 deletions(-) diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index c41234f1b82..3a9319f93e8 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -11,6 +11,9 @@ config M32R select HAVE_IDE select HAVE_OPROFILE select INIT_ALL_POSSIBLE + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA config SBUS bool diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index 560484ae35e..1003880d0df 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -4,8 +4,8 @@ # create a compressed vmlinux image from the original vmlinux # -targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \ - piggy.o vmlinux.lds +targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \ + vmlinux.bin.lzma head.o misc.o piggy.o vmlinux.lds OBJECTS = $(obj)/head.o $(obj)/misc.o @@ -27,6 +27,12 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE + $(call if_changed,bzip2) + +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzma) + CFLAGS_misc.o += -fpic ifdef CONFIG_MMU @@ -37,5 +43,9 @@ endif OBJCOPYFLAGS += -R .empty_zero_page -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE +suffix_$(CONFIG_KERNEL_GZIP) = gz +suffix_$(CONFIG_KERNEL_BZIP2) = bz2 +suffix_$(CONFIG_KERNEL_LZMA) = lzma + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE $(call if_changed,ld) diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c index d394292498c..370d6088197 100644 --- a/arch/m32r/boot/compressed/misc.c +++ b/arch/m32r/boot/compressed/misc.c @@ -9,140 +9,49 @@ * Adapted for SH by Stuart Menefy, Aug 1999 * * 2003-02-12: Support M32R by Takeo Takahashi - * This is based on arch/sh/boot/compressed/misc.c. */ -#include - /* * gzip declarations */ - -#define OF(args) args #define STATIC static #undef memset #undef memcpy #define memzero(s, n) memset ((s), 0, (n)) -typedef unsigned char uch; -typedef unsigned short ush; -typedef unsigned long ulg; - -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ - -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ - -static unsigned insize = 0; /* valid bytes in inbuf */ -static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ -static unsigned outcnt = 0; /* bytes in output buffer */ - -/* gzip flag byte */ -#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ -#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ -#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ -#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ -#define COMMENT 0x10 /* bit 4 set: file comment present */ -#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ -#define RESERVED 0xC0 /* bit 6,7: reserved */ - -#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) - -/* Diagnostic functions */ -#ifdef DEBUG -# define Assert(cond,msg) {if(!(cond)) error(msg);} -# define Trace(x) fprintf x -# define Tracev(x) {if (verbose) fprintf x ;} -# define Tracevv(x) {if (verbose>1) fprintf x ;} -# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} -# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} -#else -# define Assert(cond,msg) -# define Trace(x) -# define Tracev(x) -# define Tracevv(x) -# define Tracec(c,x) -# define Tracecv(c,x) -#endif - -static int fill_inbuf(void); -static void flush_window(void); static void error(char *m); -static unsigned char *input_data; -static int input_len; - -static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; - #include "m32r_sio.c" static unsigned long free_mem_ptr; static unsigned long free_mem_end_ptr; -#define HEAP_SIZE 0x10000 - -#include "../../../../lib/inflate.c" - -void* memset(void* s, int c, size_t n) +#ifdef CONFIG_KERNEL_BZIP2 +static void *memset(void *s, int c, size_t n) { - int i; - char *ss = (char*)s; + char *ss = s; - for (i=0;i> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} +#ifdef CONFIG_KERNEL_LZMA +#define BOOT_HEAP_SIZE 0x10000 +#include "../../../../lib/decompress_unlzma.c" +#endif static void error(char *x) { @@ -153,20 +62,20 @@ static void error(char *x) while(1); /* Halt */ } -/* return decompressed size */ void decompress_kernel(int mmu_on, unsigned char *zimage_data, unsigned int zimage_len, unsigned long heap) { + unsigned char *input_data = zimage_data; + int input_len = zimage_len; + unsigned char *output_data; + output_data = (unsigned char *)CONFIG_MEMORY_START + 0x2000 + (mmu_on ? 0x80000000 : 0); free_mem_ptr = heap; - free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; - input_data = zimage_data; - input_len = zimage_len; + free_mem_end_ptr = free_mem_ptr + BOOT_HEAP_SIZE; - makecrc(); - puts("Uncompressing Linux... "); - gunzip(); - puts("Ok, booting the kernel.\n"); + puts("\nDecompressing Linux... "); + decompress(input_data, input_len, NULL, NULL, output_data, NULL, error); + puts("done.\nBooting the kernel.\n"); } -- GitLab From 45cdd473301aae36e1f10664b9fe7ef5aad3f182 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 1 Nov 2009 15:33:06 +0100 Subject: [PATCH 0527/1165] m32r: Should index be positive? Index `ipi_num' is signed, test whether it is negative to make sure we don't get a negative array element. Signed-off-by: Roel Kluin Signed-off-by: Hirokazu Takata --- arch/m32r/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 8a88f1f0a3e..31cef20b299 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -806,7 +806,7 @@ unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num, if (mask & ~physids_coerce(phys_cpu_present_map)) BUG(); - if (ipi_num >= NR_IPIS) + if (ipi_num >= NR_IPIS || ipi_num < 0) BUG(); mask <<= IPI_SHIFT; -- GitLab From df67bed92fa86ef926da8b62a6da68722388ff72 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 30 Oct 2009 13:31:26 +1000 Subject: [PATCH 0528/1165] drm/radeon/kms: fix coherency issues on AGP cards. When we are evicting from VRAM->RAM we allocate the ttm object, but we don't set the caching policy on it before blitting into it. This means on AGP we end up blitting into cached pages, and the CPU later flushes out on top of them. This was mostly seen as font corruption. The other question is why we don't evict VRAM->GTT in a lot of cases, this would save us some cache transitions since a lot of objects that are evicted from VRAM will probably end up being pulled back in a few operations later, and evicting them to system memory involves 2 unnecessary cache transitions. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_ttm.c | 6 ++++++ drivers/gpu/drm/ttm/ttm_tt.c | 1 + 2 files changed, 7 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index c729cd1a750..f489c0de6f1 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -295,6 +295,12 @@ static int radeon_move_vram_ram(struct ttm_buffer_object *bo, if (unlikely(r)) { return r; } + + r = ttm_tt_set_placement_caching(bo->ttm, tmp_mem.placement); + if (unlikely(r)) { + goto out_cleanup; + } + r = ttm_tt_bind(bo->ttm, &tmp_mem); if (unlikely(r)) { goto out_cleanup; diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index a55ee1a56c1..7bcb89f39ce 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -279,6 +279,7 @@ int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement) return ttm_tt_set_caching(ttm, state); } +EXPORT_SYMBOL(ttm_tt_set_placement_caching); static void ttm_tt_free_alloced_pages(struct ttm_tt *ttm) { -- GitLab From d6f28938d9426d12eea1578949f1d73d24ad37ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 2 Nov 2009 16:01:27 -0500 Subject: [PATCH 0529/1165] drm/radeon/kms: Don't RMW CP_RB_CNTL Immediate readback seems faulty on some chips. I suspect it takes a while to get through the fifo to the actual register backbone. There's no need to read it back, so, just write the driver's copy of the register's value directly. Should fix bug 24535 and possibly 24218 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 12 ++++++------ drivers/gpu/drm/radeon/r600.c | 8 +++----- 2 files changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index b438b520ee7..5e821a313a8 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -578,19 +578,19 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) indirect1_start = 16; /* cp setup */ WREG32(0x718, pre_write_timer | (pre_write_limit << 28)); - WREG32(RADEON_CP_RB_CNTL, -#ifdef __BIG_ENDIAN - RADEON_BUF_SWAP_32BIT | -#endif - REG_SET(RADEON_RB_BUFSZ, rb_bufsz) | + tmp = (REG_SET(RADEON_RB_BUFSZ, rb_bufsz) | REG_SET(RADEON_RB_BLKSZ, rb_blksz) | REG_SET(RADEON_MAX_FETCH, max_fetch) | RADEON_RB_NO_UPDATE); +#ifdef __BIG_ENDIAN + tmp |= RADEON_BUF_SWAP_32BIT; +#endif + WREG32(RADEON_CP_RB_CNTL, tmp); + /* Set ring address */ DRM_INFO("radeon: ring at 0x%016lX\n", (unsigned long)rdev->cp.gpu_addr); WREG32(RADEON_CP_RB_BASE, rdev->cp.gpu_addr); /* Force read & write ptr to 0 */ - tmp = RREG32(RADEON_CP_RB_CNTL); WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA); WREG32(RADEON_CP_RB_RPTR_WR, 0); WREG32(RADEON_CP_RB_WPTR, 0); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index e87475c87d5..60fbb236edf 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1272,19 +1272,17 @@ int r600_cp_resume(struct radeon_device *rdev) /* Set ring buffer size */ rb_bufsz = drm_order(rdev->cp.ring_size / 8); + tmp = RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz; #ifdef __BIG_ENDIAN - WREG32(CP_RB_CNTL, BUF_SWAP_32BIT | RB_NO_UPDATE | - (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); -#else - WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); + tmp |= BUF_SWAP_32BIT; #endif + WREG32(CP_RB_CNTL, tmp); WREG32(CP_SEM_WAIT_TIMER, 0x4); /* Set the write pointer delay */ WREG32(CP_RB_WPTR_DELAY, 0); /* Initialize the ring buffer's read and write pointers */ - tmp = RREG32(CP_RB_CNTL); WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA); WREG32(CP_RB_RPTR_WR, 0); WREG32(CP_RB_WPTR, 0); -- GitLab From 8a9832e89ff1bc7a039c8f966f07101570be3d5e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 3 Nov 2009 13:23:15 +1000 Subject: [PATCH 0530/1165] drm/radeon/kms: disable D1VGA and D2VGA if enabled Once kms is enabled we don't need these, and it causes a problem with the Lenovo W500 ACPI brightness implementation, it hangs in a loop inside an SMI. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rv515.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 41a34c23e6d..03c052d892c 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -137,6 +137,8 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev) void rv515_vga_render_disable(struct radeon_device *rdev) { + WREG32(R_000330_D1VGA_CONTROL, 0); + WREG32(R_000338_D2VGA_CONTROL, 0); WREG32(R_000300_VGA_RENDER_CONTROL, RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL); } -- GitLab From 4d357abb895ec51f1cbdebb1fbbf4d4576900a2e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 3 Nov 2009 14:54:36 +1000 Subject: [PATCH 0531/1165] drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s. The Lenovo W500 laptop hangs inside an SMI on brightness changes, I thought it just needed the VGA disable but it turned out to require slightly more work, setting the MC locations up just like the IGP chip requirements seems to make it all happy again and I can boot and play with brightness. We should probably just do this for all chips and give up the VRAM at 0x0 idea, it never seems to buy us anything but pain. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 44 +++++++++++++++-------------------- 1 file changed, 19 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 60fbb236edf..3e5703f324b 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -409,35 +409,29 @@ int r600_mc_init(struct radeon_device *rdev) rdev->mc.gtt_location = rdev->mc.mc_vram_size; } } else { - if (rdev->family == CHIP_RS780 || rdev->family == CHIP_RS880) { - rdev->mc.vram_location = (RREG32(MC_VM_FB_LOCATION) & - 0xFFFF) << 24; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; - tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size; - if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) { - /* Enough place after vram */ - rdev->mc.gtt_location = tmp; - } else if (rdev->mc.vram_location >= rdev->mc.gtt_size) { - /* Enough place before vram */ + rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + rdev->mc.vram_location = (RREG32(MC_VM_FB_LOCATION) & + 0xFFFF) << 24; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size; + if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) { + /* Enough place after vram */ + rdev->mc.gtt_location = tmp; + } else if (rdev->mc.vram_location >= rdev->mc.gtt_size) { + /* Enough place before vram */ + rdev->mc.gtt_location = 0; + } else { + /* Not enough place after or before shrink + * gart size + */ + if (rdev->mc.vram_location > (0xFFFFFFFFUL - tmp)) { rdev->mc.gtt_location = 0; + rdev->mc.gtt_size = rdev->mc.vram_location; } else { - /* Not enough place after or before shrink - * gart size - */ - if (rdev->mc.vram_location > (0xFFFFFFFFUL - tmp)) { - rdev->mc.gtt_location = 0; - rdev->mc.gtt_size = rdev->mc.vram_location; - } else { - rdev->mc.gtt_location = tmp; - rdev->mc.gtt_size = 0xFFFFFFFFUL - tmp; - } + rdev->mc.gtt_location = tmp; + rdev->mc.gtt_size = 0xFFFFFFFFUL - tmp; } - rdev->mc.gtt_location = rdev->mc.mc_vram_size; - } else { - rdev->mc.vram_location = 0x00000000UL; - rdev->mc.gtt_location = rdev->mc.mc_vram_size; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; } + rdev->mc.gtt_location = rdev->mc.mc_vram_size; } rdev->mc.vram_start = rdev->mc.vram_location; rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; -- GitLab From 6fa8d66af83710b3610bd3b2581f051074f2b416 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Nov 2009 16:10:36 -0500 Subject: [PATCH 0532/1165] drm/radeon/kms: remove some misleading debugging output Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_bios.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 34a9b911951..906921740c6 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -50,19 +50,16 @@ static bool igp_read_bios_from_vram(struct radeon_device *rdev) vram_base = drm_get_resource_start(rdev->ddev, 0); bios = ioremap(vram_base, size); if (!bios) { - DRM_ERROR("Unable to mmap vram\n"); return false; } if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) { iounmap(bios); - DRM_ERROR("bad rom signature\n"); return false; } rdev->bios = kmalloc(size, GFP_KERNEL); if (rdev->bios == NULL) { iounmap(bios); - DRM_ERROR("kmalloc failed\n"); return false; } memcpy(rdev->bios, bios, size); -- GitLab From e29649db3bd5620499bf9bdcd63c5cf12edbd26e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Nov 2009 10:04:01 -0500 Subject: [PATCH 0533/1165] drm/radeon/kms/r700: fix some typos in chip init Noticed by Andre on IRC. Also fix up some minor whitespace issues. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rv770.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 40553913b92..ae074fdf804 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -529,11 +529,11 @@ static void rv770_gpu_init(struct radeon_device *rdev) if (rdev->family == CHIP_RV770) gb_tiling_config |= BANK_TILING(1); else - gb_tiling_config |= BANK_TILING((mc_arb_ramcfg & NOOFBANK_SHIFT) >> NOOFBANK_MASK); + gb_tiling_config |= BANK_TILING((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT); gb_tiling_config |= GROUP_SIZE(0); - if (((mc_arb_ramcfg & NOOFROWS_MASK) & NOOFROWS_SHIFT) > 3) { + if (((mc_arb_ramcfg & NOOFROWS_MASK) >> NOOFROWS_SHIFT) > 3) { gb_tiling_config |= ROW_TILING(3); gb_tiling_config |= SAMPLE_SPLIT(3); } else { @@ -579,14 +579,14 @@ static void rv770_gpu_init(struct radeon_device *rdev) /* set HW defaults for 3D engine */ WREG32(CP_QUEUE_THRESHOLDS, (ROQ_IB1_START(0x16) | - ROQ_IB2_START(0x2b))); + ROQ_IB2_START(0x2b))); WREG32(CP_MEQ_THRESHOLDS, STQ_SPLIT(0x30)); WREG32(TA_CNTL_AUX, (DISABLE_CUBE_ANISO | - SYNC_GRADIENT | - SYNC_WALKER | - SYNC_ALIGNER)); + SYNC_GRADIENT | + SYNC_WALKER | + SYNC_ALIGNER)); sx_debug_1 = RREG32(SX_DEBUG_1); sx_debug_1 |= ENABLE_NEW_SMX_ADDRESS; @@ -598,9 +598,9 @@ static void rv770_gpu_init(struct radeon_device *rdev) WREG32(SMX_DC_CTL0, smx_dc_ctl0); WREG32(SMX_EVENT_CTL, (ES_FLUSH_CTL(4) | - GS_FLUSH_CTL(4) | - ACK_FLUSH_CTL(3) | - SYNC_FLUSH_CTL)); + GS_FLUSH_CTL(4) | + ACK_FLUSH_CTL(3) | + SYNC_FLUSH_CTL)); if (rdev->family == CHIP_RV770) WREG32(DB_DEBUG3, DB_CLK_OFF_DELAY(0x1f)); @@ -611,12 +611,12 @@ static void rv770_gpu_init(struct radeon_device *rdev) } WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.rv770.sx_max_export_size / 4) - 1) | - POSITION_BUFFER_SIZE((rdev->config.rv770.sx_max_export_pos_size / 4) - 1) | - SMX_BUFFER_SIZE((rdev->config.rv770.sx_max_export_smx_size / 4) - 1))); + POSITION_BUFFER_SIZE((rdev->config.rv770.sx_max_export_pos_size / 4) - 1) | + SMX_BUFFER_SIZE((rdev->config.rv770.sx_max_export_smx_size / 4) - 1))); WREG32(PA_SC_FIFO_SIZE, (SC_PRIM_FIFO_SIZE(rdev->config.rv770.sc_prim_fifo_size) | - SC_HIZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_hiz_tile_fifo_size) | - SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_earlyz_tile_fifo_fize))); + SC_HIZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_hiz_tile_fifo_size) | + SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_earlyz_tile_fifo_fize))); WREG32(PA_SC_MULTI_CHIP_CNTL, 0); -- GitLab From f7112949f6a4cd6883d66c882d568c2197321de6 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Tue, 3 Nov 2009 19:42:45 +0800 Subject: [PATCH 0534/1165] ring-buffer: Synchronize resizing buffer with reader lock We got a sudden panic when we reduced the size of the ringbuffer. We can reproduce the panic by the following steps: echo 1 > events/sched/enable cat trace_pipe > /dev/null & while ((1)) do echo 12000 > buffer_size_kb echo 512 > buffer_size_kb done (not more than 5 seconds, panic ...) Reported-by: KOSAKI Motohiro Signed-off-by: Lai Jiangshan LKML-Reference: <4AF01735.9060409@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 3ffa502fb24..5dd017fea6f 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1193,6 +1193,7 @@ rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned nr_pages) atomic_inc(&cpu_buffer->record_disabled); synchronize_sched(); + spin_lock_irq(&cpu_buffer->reader_lock); rb_head_page_deactivate(cpu_buffer); for (i = 0; i < nr_pages; i++) { @@ -1207,6 +1208,7 @@ rb_remove_pages(struct ring_buffer_per_cpu *cpu_buffer, unsigned nr_pages) return; rb_reset_cpu(cpu_buffer); + spin_unlock_irq(&cpu_buffer->reader_lock); rb_check_pages(cpu_buffer); -- GitLab From ed146b25942b428f8e8056587b7638ce76573c2f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 3 Nov 2009 08:55:38 +0800 Subject: [PATCH 0535/1165] ftrace: Fix unmatched locking in ftrace_regex_write() When a command is passed to the set_ftrace_filter, then the ftrace_regex_lock is still held going back to user space. # echo 'do_open : foo' > set_ftrace_filter (still holding ftrace_regex_lock when returning to user space!) Signed-off-by: Li Zefan LKML-Reference: <4AEF7F8A.3080300@cn.fujitsu.com> Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 9c451a1930b..6dc4e5ef7a0 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -2222,15 +2222,15 @@ ftrace_regex_write(struct file *file, const char __user *ubuf, ret = ftrace_process_regex(parser->buffer, parser->idx, enable); if (ret) - goto out; + goto out_unlock; trace_parser_clear(parser); } ret = read; - +out_unlock: mutex_unlock(&ftrace_regex_lock); -out: + return ret; } -- GitLab From 5bdaaada16363d64e10ae081755d1a8d392429f2 Mon Sep 17 00:00:00 2001 From: Vitaliy Kulikov Date: Wed, 4 Nov 2009 07:57:45 +0100 Subject: [PATCH 0536/1165] ALSA: hda - Enable GPIO control for mute LED on HP systems This patch enables GPIO to control mute LED indicator on the HP systems with the special string in BIOS and applies it with the correct polarity on HP B-series systems. It also restores configuration of the pin intended as the second Headphone on HP B-series systems but configured as something else in the BIOS to pass MS DTM. Signed-off-by: Vitaliy Kulikov Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 68 ++++++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 66c0876bf73..b513eba2d2f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -1693,6 +1694,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "DFI LanParty", STAC_92HD71BXX_REF), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fb, "HP dv4-1222nr", STAC_HP_DV4_1222NR), + SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x1720, + "HP", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x3080, "HP", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x30f0, @@ -4730,6 +4733,26 @@ static int stac92xx_resume(struct hda_codec *codec) return 0; } +static int hp_bseries_system(u32 subsystem_id) +{ + switch (subsystem_id) { + case 0x103c307e: + case 0x103c307f: + case 0x103c3080: + case 0x103c3081: + case 0x103c1722: + case 0x103c1723: + case 0x103c1724: + case 0x103c1725: + case 0x103c1726: + case 0x103c1727: + case 0x103c1728: + case 0x103c1729: + return 1; + } + return 0; +} + /* * using power check for controlling mute led of HP notebooks * check for mute state only on Speakers (nid = 0x10) @@ -4754,6 +4777,11 @@ static int stac92xx_hp_check_power_status(struct hda_codec *codec, else spec->gpio_data |= spec->gpio_led; /* white */ + if (hp_bseries_system(codec->subsystem_id)) { + /* LED state is inverted on these systems */ + spec->gpio_data ^= spec->gpio_led; + } + stac_gpio_set(codec, spec->gpio_mask, spec->gpio_dir, spec->gpio_data); @@ -5243,6 +5271,7 @@ static int patch_stac92hd71bxx(struct hda_codec *codec) { struct sigmatel_spec *spec; struct hda_verb *unmute_init = stac92hd71bxx_unmute_core_init; + unsigned int pin_cfg; int err = 0; spec = kzalloc(sizeof(*spec), GFP_KERNEL); @@ -5426,6 +5455,45 @@ again: break; } + if (hp_bseries_system(codec->subsystem_id)) { + pin_cfg = snd_hda_codec_get_pincfg(codec, 0x0f); + if (get_defcfg_device(pin_cfg) == AC_JACK_LINE_OUT || + get_defcfg_device(pin_cfg) == AC_JACK_SPEAKER || + get_defcfg_device(pin_cfg) == AC_JACK_HP_OUT) { + /* It was changed in the BIOS to just satisfy MS DTM. + * Lets turn it back into slaved HP + */ + pin_cfg = (pin_cfg & (~AC_DEFCFG_DEVICE)) + | (AC_JACK_HP_OUT << + AC_DEFCFG_DEVICE_SHIFT); + pin_cfg = (pin_cfg & (~(AC_DEFCFG_DEF_ASSOC + | AC_DEFCFG_SEQUENCE))) + | 0x1f; + snd_hda_codec_set_pincfg(codec, 0x0f, pin_cfg); + } + } + + if ((codec->subsystem_id >> 16) == PCI_VENDOR_ID_HP) { + const struct dmi_device *dev = NULL; + while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, + NULL, dev))) { + if (strcmp(dev->name, "HP_Mute_LED_1")) { + switch (codec->vendor_id) { + case 0x111d7608: + spec->gpio_led = 0x01; + break; + case 0x111d7600: + case 0x111d7601: + case 0x111d7602: + case 0x111d7603: + spec->gpio_led = 0x08; + break; + } + break; + } + } + } + #ifdef CONFIG_SND_HDA_POWER_SAVE if (spec->gpio_led) { spec->gpio_mask |= spec->gpio_led; -- GitLab From f60311d5f7670d9539b424e4ed8b5c0872fc9e83 Mon Sep 17 00:00:00 2001 From: "Anand V. Avati" Date: Thu, 22 Oct 2009 06:24:52 -0700 Subject: [PATCH 0537/1165] fuse: prevent fuse_put_request on invalid pointer fuse_direct_io() has a loop where requests are allocated in each iteration. if allocation fails, the loop is broken out and follows into an unconditional fuse_put_request() on that invalid pointer. Signed-off-by: Anand V. Avati Signed-off-by: Miklos Szeredi Cc: stable@kernel.org --- fs/fuse/file.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index a3492f7d207..5887a6395ad 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1063,7 +1063,8 @@ ssize_t fuse_direct_io(struct file *file, const char __user *buf, break; } } - fuse_put_request(fc, req); + if (!IS_ERR(req)) + fuse_put_request(fc, req); if (res > 0) *ppos = pos; -- GitLab From 0bd87182d3ab18a32a8e9175d3f68754c58e3432 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 3 Nov 2009 11:40:44 +0100 Subject: [PATCH 0538/1165] fuse: fix kunmap in fuse_ioctl_copy_user Looks like another victim of the confusing kmap() vs kmap_atomic() API differences. Reported-by: Todor Gyumyushev Signed-off-by: Jens Axboe Signed-off-by: Miklos Szeredi Cc: Tejun Heo Cc: stable@kernel.org --- fs/fuse/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 5887a6395ad..c18913a777a 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1600,7 +1600,7 @@ static int fuse_ioctl_copy_user(struct page **pages, struct iovec *iov, kaddr += copy; } - kunmap(map); + kunmap(page); } return 0; -- GitLab From 5219f346b0ea2a2a8821f1e966b190788c285b0b Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Wed, 4 Nov 2009 10:24:52 +0100 Subject: [PATCH 0539/1165] fuse: invalidate target of rename Invalidate the target's attributes, which may have changed (such as nlink, change time) so that they are refreshed on the next getattr(). Signed-off-by: Miklos Szeredi --- fs/fuse/dir.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 992f6c9410b..8ada78aade5 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -712,8 +712,10 @@ static int fuse_rename(struct inode *olddir, struct dentry *oldent, fuse_invalidate_attr(newdir); /* newent will end up negative */ - if (newent->d_inode) + if (newent->d_inode) { + fuse_invalidate_attr(newent->d_inode); fuse_invalidate_entry_cache(newent); + } } else if (err == -EINTR) { /* If request was interrupted, DEITY only knows if the rename actually took place. If the invalidation -- GitLab From 798a8a15011e88cc63dbbb15728b42572c152093 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Wed, 4 Nov 2009 10:11:07 +0000 Subject: [PATCH 0540/1165] ALSA: hda - Add OLPC XO-1.5 PCI ID The XO-1.5 laptop now has a unique subvendor/subproduct ID, which can be used to automatically select the correct CXT5066 configuration. Signed-off-by: Daniel Drake Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 3fbbc8c01e7..6479e65858d 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -2325,6 +2325,7 @@ static struct snd_pci_quirk cxt5066_cfg_tbl[] = { CXT5066_LAPTOP), SND_PCI_QUIRK(0x1028, 0x02f5, "Dell", CXT5066_DELL_LAPTOP), + SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5), {} }; -- GitLab From 1b3a02eb452354fa9b36a7f33dc4c8307bbc40aa Mon Sep 17 00:00:00 2001 From: Tony Thompson Date: Wed, 4 Nov 2009 12:16:38 +0000 Subject: [PATCH 0541/1165] ARMv7: Check whether the SMP/nAMP mode was already enabled If running in non-secure mode, enabling this register will fault. Signed-off-by: Tony Thompson Acked-by: Srinidhi Kasagar Signed-off-by: Catalin Marinas --- arch/arm/mm/proc-v7.S | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index eeeed01ee44..3a285218fd1 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -186,9 +186,10 @@ cpu_v7_name: */ __v7_setup: #ifdef CONFIG_SMP - mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode and - orr r0, r0, #(1 << 6) | (1 << 0) @ TLB ops broadcasting - mcr p15, 0, r0, c1, c0, 1 + mrc p15, 0, r0, c1, c0, 1 + tst r0, #(1 << 6) @ SMP/nAMP mode enabled? + orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and + mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting #endif adr r12, __v7_setup_stack @ the local stack stmia r12, {r0-r5, r7, r9, r11, lr} -- GitLab From 89240ba059ca468ae7a8346edf7f95082458c2fc Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Tue, 3 Nov 2009 10:22:40 +0100 Subject: [PATCH 0542/1165] x86, fs: Fix x86 procfs stack information for threads on 64-bit This patch fixes two issues in the procfs stack information on x86-64 linux. The 32 bit loader compat_do_execve did not store stack start. (this was figured out by Alexey Dobriyan). The stack information on a x64_64 kernel always shows 0 kbyte stack usage, because of a missing implementation of the KSTK_ESP macro which always returned -1. The new implementation now returns the right value. Signed-off-by: Stefani Seibold Cc: Americo Wang Cc: Alexey Dobriyan Cc: Al Viro Cc: Andrew Morton LKML-Reference: <1257240160.4889.24.camel@wall-e> Signed-off-by: Ingo Molnar --- arch/x86/include/asm/processor.h | 2 +- arch/x86/kernel/process_64.c | 5 +++++ fs/compat.c | 2 ++ 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index c3429e8b242..c9786480f0f 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -1000,7 +1000,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk); #define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8)) #define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1) -#define KSTK_ESP(tsk) -1 /* sorry. doesn't work for syscall. */ +extern unsigned long KSTK_ESP(struct task_struct *task); #endif /* CONFIG_X86_64 */ extern void start_thread(struct pt_regs *regs, unsigned long new_ip, diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index ad535b68317..eb62cbcaa49 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -664,3 +664,8 @@ long sys_arch_prctl(int code, unsigned long addr) return do_arch_prctl(current, code, addr); } +unsigned long KSTK_ESP(struct task_struct *task) +{ + return (test_tsk_thread_flag(task, TIF_IA32)) ? + (task_pt_regs(task)->sp) : ((task)->thread.usersp); +} diff --git a/fs/compat.c b/fs/compat.c index d576b552e8e..6c19040ffee 100644 --- a/fs/compat.c +++ b/fs/compat.c @@ -1532,6 +1532,8 @@ int compat_do_execve(char * filename, if (retval < 0) goto out; + current->stack_start = current->mm->start_stack; + /* execve succeeded */ current->fs->in_exec = 0; current->in_execve = 0; -- GitLab From a3c4c58085b23d8e878a58dcdd0f8fcf8fad1ccd Mon Sep 17 00:00:00 2001 From: Li Hong Date: Mon, 19 Oct 2009 16:33:29 +0800 Subject: [PATCH 0543/1165] amd64_edac: fix a wrong goto clause in amd64_edac.c In amd64_edac_init(void) in amd64_edac.c, cache_k8_northbridges() is called before pci_register_driver. If it fails, should exit with err directly. Signed-off-by: Li Hong Acked-by: Doug Thompson Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index d4560d9d5a8..3ee539a3fbb 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -3163,7 +3163,7 @@ static int __init amd64_edac_init(void) opstate_init(); if (cache_k8_northbridges() < 0) - goto err_exit; + return err; err = pci_register_driver(&amd64_pci_driver); if (err) @@ -3189,8 +3189,6 @@ static int __init amd64_edac_init(void) err_2nd_stage: debugf0("2nd stage failed\n"); - -err_exit: pci_unregister_driver(&amd64_pci_driver); return err; -- GitLab From 17adea01b9606e416ea5116a27d02d47fe7e6c8d Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Wed, 4 Nov 2009 14:04:06 +0100 Subject: [PATCH 0544/1165] amd64_edac: fix CECCs reporting Shift error type bits properly. Signed-off-by: Borislav Petkov --- drivers/edac/amd64_edac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 3ee539a3fbb..a38831c8264 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -2254,7 +2254,7 @@ static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci, { u32 ec = ERROR_CODE(info->nbsl); u32 xec = EXT_ERROR_CODE(info->nbsl); - int ecc_type = info->nbsh & (0x3 << 13); + int ecc_type = (info->nbsh >> 13) & 0x3; /* Bail early out if this was an 'observed' error */ if (PP(ec) == K8_NBSL_PP_OBS) -- GitLab From 3a19d56c71bd3a08412d609d219ac8eec0819166 Mon Sep 17 00:00:00 2001 From: Torgny Johansson Date: Wed, 4 Nov 2009 05:25:02 -0800 Subject: [PATCH 0545/1165] cdc_ether: additional Ericsson MBM PID's to the whitelist Signed-off-by: Torgny Johansson Signed-off-by: David S. Miller --- drivers/net/usb/Kconfig | 2 +- drivers/net/usb/cdc_ether.c | 42 ++++++++++++++++++++++++++++++++++++- 2 files changed, 42 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index c47237c2d63..32d93564a74 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -174,7 +174,7 @@ config USB_NET_CDCETHER * Ericsson Mobile Broadband Module (all variants) * Motorola (DM100 and SB4100) * Broadcom Cable Modem (reference design) - * Toshiba (PCX1100U and F3507g) + * Toshiba (PCX1100U and F3507g/F3607gw) * ... This driver creates an interface named "ethX", where X depends on diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 4a6aff57940..21e1ba16000 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -544,20 +544,60 @@ static const struct usb_device_id products [] = { USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { - /* Ericsson F3307 */ + /* Ericsson F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3607gw ver 3 */ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3307 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3307 ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson C3607w */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, }, { /* Toshiba F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, +}, { + /* Toshiba F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Toshiba F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, }, { /* Dell F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, +}, { + /* Dell F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Dell F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, }, { }, // END }; -- GitLab From c8ee5538b091b8aca9ca738c6989c5ad6f9e67c0 Mon Sep 17 00:00:00 2001 From: Tonyliu Date: Wed, 4 Nov 2009 05:45:02 -0800 Subject: [PATCH 0546/1165] DaVinci EMAC: correct param for ISR emac_irq is declared as: static irqreturn_t emac_irq(int irq, void *dev_id) { struct net_device *ndev = (struct net_device *)dev_id; struct emac_priv *priv = netdev_priv(ndev); ... Clearly emac_irq() needs "struct net_device *" as "void *dev_id", so correct this. Signed-off-by: Tonyliu Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index f72c56dec33..3179521aee9 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2221,7 +2221,7 @@ void emac_poll_controller(struct net_device *ndev) struct emac_priv *priv = netdev_priv(ndev); emac_int_disable(priv); - emac_irq(ndev->irq, priv); + emac_irq(ndev->irq, ndev); emac_int_enable(priv); } #endif -- GitLab From a9e38c3e01ad242fe2a625354cf065c34b01e3aa Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Fri, 23 Oct 2009 09:37:00 +0200 Subject: [PATCH 0547/1165] KVM: x86: Catch potential overrun in MCE setup We only allocate memory for 32 MCE banks (KVM_MAX_MCE_BANKS) but we allow user space to fill up to 255 on setup (mcg_cap & 0xff), corrupting kernel memory. Catch these overflows. Signed-off-by: Jan Kiszka Signed-off-by: Marcelo Tosatti --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9b9695322f5..8a93fa894ba 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1692,7 +1692,7 @@ static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu, unsigned bank_num = mcg_cap & 0xff, bank; r = -EINVAL; - if (!bank_num) + if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS) goto out; if (mcg_cap & ~(KVM_MCE_CAP_SUPPORTED | 0xff | 0xff0000)) goto out; -- GitLab From abb3911965c1bd8eea305f64d4840a314259d96d Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Sun, 25 Oct 2009 17:42:02 +0200 Subject: [PATCH 0548/1165] KVM: get_tss_base_addr() should return a gpa_t If TSS we are switching to resides in high memory task switch will fail since address will be truncated. Windows2k3 does this sometimes when running with more then 4G Cc: stable@kernel.org Signed-off-by: Gleb Natapov Signed-off-by: Avi Kivity --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 8a93fa894ba..ae07d261527 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4051,7 +4051,7 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, return kvm_write_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu); } -static u32 get_tss_base_addr(struct kvm_vcpu *vcpu, +static gpa_t get_tss_base_addr(struct kvm_vcpu *vcpu, struct desc_struct *seg_desc) { u32 base_addr = get_desc_base(seg_desc); -- GitLab From 02303d2028aef19889415364fc5f7bb374887157 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:25:57 -0800 Subject: [PATCH 0549/1165] isdn: hisax: Fix lock imbalance. Add omittted unlocks to 2 functions. Signed-off-by: Jiri Slaby Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hisax/amd7930_fn.c | 1 + drivers/isdn/hisax/icc.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c index bf526a7a63a..d6fdf1f6675 100644 --- a/drivers/isdn/hisax/amd7930_fn.c +++ b/drivers/isdn/hisax/amd7930_fn.c @@ -594,6 +594,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg) if (cs->debug & L1_DEB_WARN) debugl1(cs, "Amd7930: l1hw: l2l1 tx_skb exist this shouldn't happen"); skb_queue_tail(&cs->sq, skb); + spin_unlock_irqrestore(&cs->lock, flags); break; } if (cs->debug & DEB_DLOG_HEX) diff --git a/drivers/isdn/hisax/icc.c b/drivers/isdn/hisax/icc.c index 9aba646ba22..c80cbb8a2ef 100644 --- a/drivers/isdn/hisax/icc.c +++ b/drivers/isdn/hisax/icc.c @@ -468,6 +468,7 @@ ICC_l1hw(struct PStack *st, int pr, void *arg) if (cs->debug & L1_DEB_WARN) debugl1(cs, " l2l1 tx_skb exist this shouldn't happen"); skb_queue_tail(&cs->sq, skb); + spin_unlock_irqrestore(&cs->lock, flags); break; } if (cs->debug & DEB_DLOG_HEX) -- GitLab From 08cb3f60b2f866c906a5a779444b30ba8f9a93c8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Nov 2009 08:27:09 -0800 Subject: [PATCH 0550/1165] misdn: Fix reversed 'if' in st_own_ctrl The current code probably returns -EINVAL a lot. Otherwise it would oops. Compile tested only. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/mISDN/stack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c index 3e1532a180f..0d05ec43012 100644 --- a/drivers/isdn/mISDN/stack.c +++ b/drivers/isdn/mISDN/stack.c @@ -364,7 +364,7 @@ add_layer2(struct mISDNchannel *ch, struct mISDNstack *st) static int st_own_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg) { - if (!ch->st || ch->st->layer1) + if (!ch->st || !ch->st->layer1) return -EINVAL; return ch->st->layer1->ctrl(ch->st->layer1, cmd, arg); } -- GitLab From 1ea70841f07666af69e481d4ffdd6edb56db3c92 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:28:12 -0800 Subject: [PATCH 0551/1165] isdn: eicon: Use offsetof Use offsetof instead of explicit implementation. * fixes bug with omitted & like: len = (byte)(((T30_INFO *) 0)->station_id + 20) * avoids compiler warnings with wrong sizes (pointer-to-char cast): len = (byte)(&(((T30_INFO *) 0)->universal_6)); * cleans up the code Signed-off-by: Jiri Slaby Cc: Karsten Keil Acked-by: Armin Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hardware/eicon/message.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c index 27d5dd68f4f..ae89fb89da6 100644 --- a/drivers/isdn/hardware/eicon/message.c +++ b/drivers/isdn/hardware/eicon/message.c @@ -2692,7 +2692,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, if (!(fax_control_bits & T30_CONTROL_BIT_MORE_DOCUMENTS) || (fax_feature_bits & T30_FEATURE_BIT_MORE_DOCUMENTS)) { - len = (byte)(&(((T30_INFO *) 0)->universal_6)); + len = offsetof(T30_INFO, universal_6); fax_info_change = false; if (ncpi->length >= 4) { @@ -2754,7 +2754,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, for (i = 0; i < w; i++) ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id[i] = fax_parms[4].info[1+i]; ((T30_INFO *)(plci->fax_connect_info_buffer))->head_line_len = 0; - len = (byte)(((T30_INFO *) 0)->station_id + 20); + len = offsetof(T30_INFO, station_id) + 20; w = fax_parms[5].length; if (w > 20) w = 20; @@ -2788,7 +2788,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, } else { - len = (byte)(&(((T30_INFO *) 0)->universal_6)); + len = offsetof(T30_INFO, universal_6); } fax_info_change = true; @@ -2892,7 +2892,7 @@ static byte connect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_ENABLE_NSF) && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_NEGOTIATE_RESP)) { - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; if (plci->fax_connect_info_length < len) { ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0; @@ -3802,7 +3802,7 @@ static byte manufacturer_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, break; } ncpi = &m_parms[1]; - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; if (plci->fax_connect_info_length < len) { ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0; @@ -6844,7 +6844,7 @@ static void nl_ind(PLCI *plci) if ((plci->requested_options_conn | plci->requested_options | a->requested_options_table[plci->appl->Id-1]) & ((1L << PRIVATE_FAX_SUB_SEP_PWD) | (1L << PRIVATE_FAX_NONSTANDARD))) { - i = ((word)(((T30_INFO *) 0)->station_id + 20)) + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len; + i = offsetof(T30_INFO, station_id) + 20 + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len; while (i < plci->NL.RBuffer->length) plci->ncpi_buffer[++len] = plci->NL.RBuffer->P[i++]; } @@ -7236,7 +7236,7 @@ static void nl_ind(PLCI *plci) { plci->RData[1].P = plci->RData[0].P; plci->RData[1].PLength = plci->RData[0].PLength; - plci->RData[0].P = v120_header_buffer + (-((int) v120_header_buffer) & 3); + plci->RData[0].P = v120_header_buffer + (-((unsigned long)v120_header_buffer) & 3); if ((plci->NL.RBuffer->P[0] & V120_HEADER_EXTEND_BIT) || (plci->NL.RLength == 1)) plci->RData[0].PLength = 1; else @@ -8473,7 +8473,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) fax_control_bits |= T30_CONTROL_BIT_ACCEPT_SEL_POLLING; } len = nlc[0]; - pos = ((byte)(((T30_INFO *) 0)->station_id + 20)); + pos = offsetof(T30_INFO, station_id) + 20; if (pos < plci->fax_connect_info_length) { for (i = 1 + plci->fax_connect_info_buffer[pos]; i != 0; i--) @@ -8525,7 +8525,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) } PUT_WORD(&(((T30_INFO *)&nlc[1])->control_bits_low), fax_control_bits); - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; for (i = 0; i < len; i++) plci->fax_connect_info_buffer[i] = nlc[1+i]; ((T30_INFO *) plci->fax_connect_info_buffer)->head_line_len = 0; -- GitLab From b9db21f8b964e158f95bb581c887159b6cb98ffa Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:30:08 -0800 Subject: [PATCH 0552/1165] isdn: eicon: Return on error When diva_strace_read_uint returns an error, return even from process_idi_event, because l2_state is uninitialized. Signed-off-by: Jiri Slaby Cc: Karsten Keil Acked-by: Armin Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hardware/eicon/maintidi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c index 23960cb6eaa..41c26e75645 100644 --- a/drivers/isdn/hardware/eicon/maintidi.c +++ b/drivers/isdn/hardware/eicon/maintidi.c @@ -959,8 +959,9 @@ static int process_idi_event (diva_strace_context_t* pLib, } if (!strncmp("State\\Layer2 No1", path, pVar->path_length)) { char* tmp = &pLib->lines[0].pInterface->Layer2[0]; - dword l2_state; - diva_strace_read_uint (pVar, &l2_state); + dword l2_state; + if (diva_strace_read_uint(pVar, &l2_state)) + return -1; switch (l2_state) { case 0: -- GitLab From a947c8f0313c0cf3691b8d8d2b9aaddf372afdcc Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Nov 2009 08:31:19 -0800 Subject: [PATCH 0553/1165] isdn: hisax: Fix test in waitforxfw The negation makes it a bool before the comparison and hence it will never be 0x40. Signed-off-by: Roel Kluin Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hisax/diva.c | 2 +- drivers/isdn/hisax/hscx_irq.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c index 018bd293e58..0b0c2e5d806 100644 --- a/drivers/isdn/hisax/diva.c +++ b/drivers/isdn/hisax/diva.c @@ -382,7 +382,7 @@ MemwaitforXFW(struct IsdnCardState *cs, int hscx) { int to = 50; - while ((!(MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) { + while (((MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) { udelay(1); to--; } diff --git a/drivers/isdn/hisax/hscx_irq.c b/drivers/isdn/hisax/hscx_irq.c index 7b1ad5e4ecd..2387d76c721 100644 --- a/drivers/isdn/hisax/hscx_irq.c +++ b/drivers/isdn/hisax/hscx_irq.c @@ -32,7 +32,7 @@ waitforXFW(struct IsdnCardState *cs, int hscx) { int to = 50; - while ((!(READHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) { + while (((READHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) { udelay(1); to--; } -- GitLab From 286e633ef0ff5bb63c07b4516665da8004966fec Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Nov 2009 08:31:59 -0800 Subject: [PATCH 0554/1165] isdn: hfc_usb: Fix read buffer overflow Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hisax/hfc_usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 9de54202c90..a420b64472e 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -817,8 +817,8 @@ collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish) } /* we have a complete hdlc packet */ if (finish) { - if ((!fifo->skbuff->data[fifo->skbuff->len - 1]) - && (fifo->skbuff->len > 3)) { + if (fifo->skbuff->len > 3 && + !fifo->skbuff->data[fifo->skbuff->len - 1]) { if (fifon == HFCUSB_D_RX) { DBG(HFCUSB_DBG_DCHANNEL, -- GitLab From dffc14365bb07812567ee7f3f8699277ef19aaa8 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 4 Nov 2009 09:38:58 -0800 Subject: [PATCH 0555/1165] MAINTAINERS: Add git net-next-2.6 Add a reference to the the git tree where most of the forward going network development occurs. Signed-off-by: Joe Perches Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index cdbbaf59a43..c856aee0f1e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3632,6 +3632,7 @@ L: netdev@vger.kernel.org W: http://www.linuxfoundation.org/en/Net W: http://patchwork.ozlabs.org/project/netdev/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git S: Maintained F: net/ F: include/net/ -- GitLab From 4c3da2209b1261af9a948b7509a38904c8eee554 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Wed, 4 Nov 2009 02:50:06 -0800 Subject: [PATCH 0556/1165] sysfs: Don't leak secdata when a sysfs_dirent is freed. While refreshing my sysfs patches I noticed a leak in the secdata implementation. We don't free the secdata when we free the sysfs dirent. This is a bug in 2.6.32-rc5 that we really should close. Signed-off-by: Eric W. Biederman Acked-by: Serge Hallyn Signed-off-by: James Morris --- fs/sysfs/dir.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c index 5fad489ce5b..e0201837d24 100644 --- a/fs/sysfs/dir.c +++ b/fs/sysfs/dir.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "sysfs.h" DEFINE_MUTEX(sysfs_mutex); @@ -285,6 +286,9 @@ void release_sysfs_dirent(struct sysfs_dirent * sd) sysfs_put(sd->s_symlink.target_sd); if (sysfs_type(sd) & SYSFS_COPY_NAME) kfree(sd->s_name); + if (sd->s_iattr && sd->s_iattr->ia_secdata) + security_release_secctx(sd->s_iattr->ia_secdata, + sd->s_iattr->ia_secdata_len); kfree(sd->s_iattr); sysfs_free_ino(sd->s_ino); kmem_cache_free(sysfs_dir_cachep, sd); -- GitLab From 37b12dd2b07b4d7dc222a5f7f88b25cec532b2aa Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 4 Nov 2009 00:00:25 -0600 Subject: [PATCH 0557/1165] rtl8187: Fix kernel oops when device is removed when LEDS enabled As reported by Rick Farina (sidhayn@gmail.com), removing the RTL8187 USB stick, or unloading the driver rtl8187 using rmmod will cause a kernel oops. There are at least two forms of the failure, (1) BUG: Scheduling while atomic, and (2) a fatal kernel page fault. This problem is reported in Bugzilla #14539. This problem does not occur for kernel 2.6.31, but does for 2.6.32-rc2, thus it is technically a regression; however, bisection did not locate any faulty patch. The fix was found by comparing the faulty code in rtl8187 with p54usb. My interpretation is that the handling of work queues in mac80211 changed enough to the LEDs to be unregistered before tasks on the work queues are cancelled. Previously, these actions could be done in either order. (Herton Ronaldo Krzesinski reports that the code is the same in 2.6.31, so this may be a candidate for 2.6.31.x. -- JWL) Signed-off-by: Larry Finger Reported-by: Rick Farina Tested-by: Rick Farina Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_leds.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c index a1c670fc155..cf8a4a40fdf 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_leds.c +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c @@ -210,10 +210,10 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev) /* turn the LED off before exiting */ ieee80211_queue_delayed_work(dev, &priv->led_off, 0); - cancel_delayed_work_sync(&priv->led_off); - cancel_delayed_work_sync(&priv->led_on); rtl8187_unregister_led(&priv->led_rx); rtl8187_unregister_led(&priv->led_tx); + cancel_delayed_work_sync(&priv->led_off); + cancel_delayed_work_sync(&priv->led_on); } #endif /* def CONFIG_RTL8187_LED */ -- GitLab From f1167fb318f0ff0bcb9cbb57bb6d16ad450f0cfb Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 4 Nov 2009 13:39:52 +0000 Subject: [PATCH 0558/1165] powerpc/mm: Remove debug context clamping from nohash code I inadvertently left that debug code enabled, causing the number of contexts to be clamped to 31 which is going to slow things down on 4xx and just plain breaks 8xx Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/mm/mmu_context_nohash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index c2f93dc470e..be4f34c30a0 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -25,8 +25,8 @@ * also clear mm->cpu_vm_mask bits when processes are migrated */ -#define DEBUG_MAP_CONSISTENCY -#define DEBUG_CLAMP_LAST_CONTEXT 31 +//#define DEBUG_MAP_CONSISTENCY +//#define DEBUG_CLAMP_LAST_CONTEXT 31 //#define DEBUG_HARDER /* We don't use DEBUG because it tends to be compiled in always nowadays -- GitLab From 978d7eb31d44de34a7f71e04ed4158f3f854688d Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Sun, 1 Nov 2009 19:11:03 +0000 Subject: [PATCH 0559/1165] powerpc: Avoid giving out RTC dates below EPOCH Doing so causes xtime to be negative which crashes the timekeeping code in funny ways when doing suspend/resume Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/time.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 92dc844299b..a136a11c490 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -777,7 +777,7 @@ int update_persistent_clock(struct timespec now) return ppc_md.set_rtc_time(&tm); } -void read_persistent_clock(struct timespec *ts) +static void __read_persistent_clock(struct timespec *ts) { struct rtc_time tm; static int first = 1; @@ -800,10 +800,23 @@ void read_persistent_clock(struct timespec *ts) return; } ppc_md.get_rtc_time(&tm); + ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec); } +void read_persistent_clock(struct timespec *ts) +{ + __read_persistent_clock(ts); + + /* Sanitize it in case real time clock is set below EPOCH */ + if (ts->tv_sec < 0) { + ts->tv_sec = 0; + ts->tv_nsec = 0; + } + +} + /* clocksource code */ static cycle_t rtc_read(struct clocksource *cs) { -- GitLab From 8435b027b87a78145992c37b0b8ed0f1b7761bf0 Mon Sep 17 00:00:00 2001 From: Andre Detsch Date: Wed, 4 Nov 2009 13:03:19 -0200 Subject: [PATCH 0560/1165] powerpc/pci: Fix regression in powerpc MSI-X Patch f598282f5145036312d90875d0ed5c14b49fd8a7 exposed a problem in powerpc MSI-X functionality, making network interfaces such as ixgbe and cxgb3 stop to work when MSI-X is enabled. RX interrupts were not being generated. The problem was caused because MSI irq was not being effectively unmasked after device initialization. Signed-off-by: Andre Detsch Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/msi.c | 2 -- arch/powerpc/platforms/pseries/xics.c | 9 +++++++++ 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index bf2e1ac4130..1164c3430f2 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -432,8 +432,6 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) /* Read config space back so we can restore after reset */ read_msi_msg(virq, &msg); entry->msg = msg; - - unmask_msi_irq(virq); } return 0; diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 419f8a637ff..b9bf0eedccf 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -219,6 +220,14 @@ static void xics_unmask_irq(unsigned int virq) static unsigned int xics_startup(unsigned int virq) { + /* + * The generic MSI code returns with the interrupt disabled on the + * card, using the MSI mask bits. Firmware doesn't appear to unmask + * at that level, so we do it here by hand. + */ + if (irq_to_desc(virq)->msi_desc) + unmask_msi_irq(virq); + /* unmask it */ xics_unmask_irq(virq); return 0; -- GitLab From 38634e6769920929385f1ffc8820dc3e893cc630 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 5 Nov 2009 17:10:34 +1100 Subject: [PATCH 0561/1165] powerpc/kvm: Remove problematic BUILD_BUG_ON statement Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kvm/timing.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/powerpc/kvm/timing.h b/arch/powerpc/kvm/timing.h index bb13b1f3cd5..806ef67868b 100644 --- a/arch/powerpc/kvm/timing.h +++ b/arch/powerpc/kvm/timing.h @@ -48,7 +48,11 @@ static inline void kvmppc_set_exit_type(struct kvm_vcpu *vcpu, int type) {} static inline void kvmppc_account_exit_stat(struct kvm_vcpu *vcpu, int type) { /* type has to be known at build time for optimization */ + + /* The BUILD_BUG_ON below breaks in funny ways, commented out + * for now ... -BenH BUILD_BUG_ON(__builtin_constant_p(type)); + */ switch (type) { case EXT_INTR_EXITS: vcpu->stat.ext_intr_exits++; -- GitLab From 7e6c3989af5baee999ef9a4424e85938cba8d34a Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Wed, 4 Nov 2009 21:03:46 -0500 Subject: [PATCH 0562/1165] ALSA: intel8x0: Mute External Amplifier by default for another Sony model BugLink: https://bugs.launchpad.net/bugs/474972 This Sony model needs External Amplifier muted for audible playback, so make sure we set the inv_eapd quirk. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/intel8x0.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c index 754867ed478..aac20fb4aad 100644 --- a/sound/pci/intel8x0.c +++ b/sound/pci/intel8x0.c @@ -1948,6 +1948,12 @@ static struct ac97_quirk ac97_quirks[] __devinitdata = { .name = "HP xw4200", /* AD1981B*/ .type = AC97_TUNE_HP_ONLY }, + { + .subvendor = 0x104d, + .subdevice = 0x8144, + .name = "Sony", + .type = AC97_TUNE_INV_EAPD + }, { .subvendor = 0x104d, .subdevice = 0x8197, -- GitLab From f702cf463e1308fbb0c1faa9f3d8e3fa9cb5630f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 4 Nov 2009 16:04:52 -0800 Subject: [PATCH 0563/1165] sound: Use KERN_WARNING instead of KERN_WARN, which does not exist Reported-by: Andrew Lyon Signed-off-by: Randy Dunlap Signed-off-by: Takashi Iwai --- sound/oss/sb_common.c | 4 ++-- sound/oss/sb_ess.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/oss/sb_common.c b/sound/oss/sb_common.c index 77d0e5efda7..ce4db49291f 100644 --- a/sound/oss/sb_common.c +++ b/sound/oss/sb_common.c @@ -157,7 +157,7 @@ static void sb_intr (sb_devc *devc) break; default: - /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ ; } } @@ -177,7 +177,7 @@ static void sb_intr (sb_devc *devc) break; default: - /* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */ ; } } diff --git a/sound/oss/sb_ess.c b/sound/oss/sb_ess.c index 180e95c87e3..51a3d381a59 100644 --- a/sound/oss/sb_ess.c +++ b/sound/oss/sb_ess.c @@ -782,7 +782,7 @@ printk(KERN_INFO "FKS: ess_handle_channel %s irq_mode=%d\n", channel, irq_mode); break; default:; - /* printk(KERN_WARN "ESS: Unexpected interrupt\n"); */ + /* printk(KERN_WARNING "ESS: Unexpected interrupt\n"); */ } } -- GitLab From 22402529df88ec39a59b08a46bced73dd5722b64 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 5 Nov 2009 01:32:44 -0800 Subject: [PATCH 0564/1165] virtio_net: rename driver struct to please modpost MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 3d1285b (move virtnet_remove to .devexit.text) introduced the first reference to __devexit in struct virtio_driver virtio_net which upset modpost ("Section mismatch in reference from the variable virtio_net to the function .devexit.text:virtnet_remove()"). Fix this by renaming virtio_net to virtio_net_driver. Signed-off-by: Uwe Kleine-König Reported-by: Michael S. Tsirkin Blame-taken-by: Rusty Russell Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index d9ebac8a2d9..bb8b52d0d1c 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -999,7 +999,7 @@ static unsigned int features[] = { VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, }; -static struct virtio_driver virtio_net = { +static struct virtio_driver virtio_net_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, @@ -1012,12 +1012,12 @@ static struct virtio_driver virtio_net = { static int __init init(void) { - return register_virtio_driver(&virtio_net); + return register_virtio_driver(&virtio_net_driver); } static void __exit fini(void) { - unregister_virtio_driver(&virtio_net); + unregister_virtio_driver(&virtio_net_driver); } module_init(init); module_exit(fini); -- GitLab From 9b229fa0951fb47cbc178be4bd8e9ef185b38802 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 4 Nov 2009 12:16:38 +0000 Subject: [PATCH 0565/1165] Check whether the SCU was already initialised If Linux is running in non-secure mode, this register may have been already initialised and writing to the control register not allowed. Signed-off-by: Catalin Marinas --- arch/arm/kernel/smp_scu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index d3831f616ee..9ab4149bd98 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -37,6 +37,10 @@ void __init scu_enable(void __iomem *scu_base) u32 scu_ctrl; scu_ctrl = __raw_readl(scu_base + SCU_CTRL); + /* already enabled? */ + if (scu_ctrl & 1) + return; + scu_ctrl |= 1; __raw_writel(scu_ctrl, scu_base + SCU_CTRL); -- GitLab From 5b39d1548dc2751f8de89e6f429b6560a137eebb Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 4 Nov 2009 12:19:04 +0000 Subject: [PATCH 0566/1165] RealView: Add default memory configuration This patch adds a realview_fixup() function called during booting to set up the memory banks. This way there is no need to pass a "mem=" argument on the kernel command line. Signed-off-by: Catalin Marinas --- arch/arm/mach-realview/core.c | 21 +++++++++++++++++++++ arch/arm/mach-realview/core.h | 6 ++++++ arch/arm/mach-realview/realview_eb.c | 1 + arch/arm/mach-realview/realview_pb1176.c | 13 +++++++++++++ arch/arm/mach-realview/realview_pb11mp.c | 1 + arch/arm/mach-realview/realview_pba8.c | 1 + arch/arm/mach-realview/realview_pbx.c | 1 + 7 files changed, 44 insertions(+) diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index a2083b60e3f..c21b0fd3965 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -788,3 +788,24 @@ void __init realview_timer_init(unsigned int timer_irq) realview_clocksource_init(); realview_clockevents_init(timer_irq); } + +/* + * Setup the memory banks. + */ +void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from, + struct meminfo *meminfo) +{ + /* + * Most RealView platforms have 512MB contiguous RAM at 0x70000000. + * Half of this is mirrored at 0. + */ +#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET + meminfo->bank[0].start = 0x70000000; + meminfo->bank[0].size = SZ_512M; + meminfo->nr_banks = 1; +#else + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_256M; + meminfo->nr_banks = 1; +#endif +} diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h index 699671fa6e0..781bca68a9f 100644 --- a/arch/arm/mach-realview/core.h +++ b/arch/arm/mach-realview/core.h @@ -25,6 +25,7 @@ #include #include +#include #include #define AMBA_DEVICE(name,busid,base,plat) \ @@ -44,6 +45,8 @@ static struct amba_device name##_device = { \ /* .dma = base##_DMA,*/ \ } +struct machine_desc; + extern struct platform_device realview_flash_device; extern struct platform_device realview_cf_device; extern struct platform_device realview_i2c_device; @@ -61,5 +64,8 @@ extern void realview_timer_init(unsigned int timer_irq); extern int realview_flash_register(struct resource *res, u32 num); extern int realview_eth_register(const char *name, struct resource *res); extern int realview_usb_register(struct resource *res); +extern void realview_fixup(struct machine_desc *mdesc, struct tag *tags, + char **from, struct meminfo *meminfo); extern void (*realview_reset)(char); + #endif diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 1d65e64ae57..917f8ca3abf 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -415,6 +415,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .phys_io = REALVIEW_EB_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_eb_map_io, .init_irq = gic_init_irq, .timer = &realview_eb_timer, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index a6ba147692c..7fb726d5f8b 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -300,6 +300,18 @@ static void realview_pb1176_reset(char mode) __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl); } +static void realview_pb1176_fixup(struct machine_desc *mdesc, + struct tag *tags, char **from, + struct meminfo *meminfo) +{ + /* + * RealView PB1176 only has 128MB of RAM mapped at 0. + */ + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_128M; + meminfo->nr_banks = 1; +} + static void __init realview_pb1176_init(void) { int i; @@ -331,6 +343,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .phys_io = REALVIEW_PB1176_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_pb1176_fixup, .map_io = realview_pb1176_map_io, .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 070d284ce96..9bbbfc05f22 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -347,6 +347,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .phys_io = REALVIEW_PB11MP_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pb11mp_map_io, .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index 941beb2b970..fe861e96c56 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -298,6 +298,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .phys_io = REALVIEW_PBA8_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pba8_map_io, .init_irq = gic_init_irq, .timer = &realview_pba8_timer, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 7e4bc6cdca5..5d09d8b4a1c 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -345,6 +345,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .phys_io = REALVIEW_PBX_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, + .fixup = realview_fixup, .map_io = realview_pbx_map_io, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, -- GitLab From 157aed7473d300587e89cc87e13f194e3fa6fa36 Mon Sep 17 00:00:00 2001 From: Colin Tuckley Date: Wed, 4 Nov 2009 12:19:05 +0000 Subject: [PATCH 0567/1165] RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statements The platsmp.c file defines the REALVIEW_SYS_FLAGS* macros which are already present in platform.h. Just use the latter. Signed-off-by: Colin Tuckley Signed-off-by: Catalin Marinas --- arch/arm/mach-realview/platsmp.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index a88458b4799..009265818d5 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -146,11 +146,8 @@ static void __init poke_milo(void) * register. The BootMonitor waits for this register to become * non-zero. */ -#define REALVIEW_SYS_FLAGSS_OFFSET 0x30 -#define REALVIEW_SYS_FLAGSC_OFFSET 0x34 __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), - __io_address(REALVIEW_SYS_BASE) + - REALVIEW_SYS_FLAGSS_OFFSET); + __io_address(REALVIEW_SYS_FLAGSSET)); mb(); } -- GitLab From c97c5aa83c41a532bc67da356d77da929bc41b9c Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 4 Nov 2009 12:19:05 +0000 Subject: [PATCH 0568/1165] RealView: Add sparsemem support for the RealView PBX platform The RealView PBX board has two 512MB blocks of memory - one at 0x70000000 (with 256MB mirror at 0) and another at 0x20000000. Only the block at 0x70000000 (or the mirror at 0) may be used for DMA (e.g. framebuffer). This patch adds the sparsemem definitions to allow the use of all the memory split as follows: 256MB @ 0x00000000 (ZONE_DMA) 512MB @ 0x20000000 (ZONE_NORMAL) 256MB @ 0x80000000 (ZONE_NORMAL) Signed-off-by: Catalin Marinas --- arch/arm/mach-realview/Kconfig | 5 +- arch/arm/mach-realview/core.c | 21 ++++++++- arch/arm/mach-realview/include/mach/memory.h | 49 ++++++++++++++++++++ arch/arm/mach-realview/realview_pbx.c | 22 ++++++++- 4 files changed, 94 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index dfc9b0bc6eb..c48e1f2c334 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -70,6 +70,8 @@ config MACH_REALVIEW_PBX bool "Support RealView/PBX platform" select ARM_GIC select HAVE_PATA_PLATFORM + select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET + select ZONE_DMA if SPARSEMEM help Include support for the ARM(R) RealView PBX platform. @@ -82,6 +84,7 @@ config REALVIEW_HIGH_PHYS_OFFSET 0x70000000, 256MB of which being mirrored at 0x00000000. If the board supports 512MB of RAM, this option allows the memory to be accessed contiguously at the high physical - offset. + offset. On the PBX board, disabling this option allows 1GB of + RAM to be used with SPARSEMEM. endmenu diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index c21b0fd3965..9f293438e02 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -59,6 +59,25 @@ /* used by entry-macro.S and platsmp.c */ void __iomem *gic_cpu_base_addr; +#ifdef CONFIG_ZONE_DMA +/* + * Adjust the zones if there are restrictions for DMA access. + */ +void __init realview_adjust_zones(int node, unsigned long *size, + unsigned long *hole) +{ + unsigned long dma_size = SZ_256M >> PAGE_SHIFT; + + if (!machine_is_realview_pbx() || node || (size[0] <= dma_size)) + return; + + size[ZONE_NORMAL] = size[0] - dma_size; + size[ZONE_DMA] = dma_size; + hole[ZONE_NORMAL] = hole[0]; + hole[ZONE_DMA] = 0; +} +#endif + /* * This is the RealView sched_clock implementation. This has * a resolution of 41.7ns, and a maximum value of about 179s. @@ -543,7 +562,7 @@ static int realview_clcd_setup(struct clcd_fb *fb) fb->panel = realview_clcd_panel(); fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize, - &dma, GFP_KERNEL); + &dma, GFP_KERNEL | GFP_DMA); if (!fb->fb.screen_base) { printk(KERN_ERR "CLCD: unable to map framebuffer\n"); return -ENOMEM; diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 293c30025e7..2417bbcf97f 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -29,4 +29,53 @@ #define PHYS_OFFSET UL(0x00000000) #endif +#if !defined(__ASSEMBLY__) && defined(CONFIG_ZONE_DMA) +extern void realview_adjust_zones(int node, unsigned long *size, + unsigned long *hole); +#define arch_adjust_zones(node, size, hole) \ + realview_adjust_zones(node, size, hole) + +#define ISA_DMA_THRESHOLD (PHYS_OFFSET + SZ_256M - 1) +#define MAX_DMA_ADDRESS (PAGE_OFFSET + SZ_256M) +#endif + +#ifdef CONFIG_SPARSEMEM + +/* + * Sparsemem definitions for RealView PBX. + * + * The RealView PBX board has another block of 512MB of RAM at 0x20000000, + * however only the block at 0x70000000 (or the 256MB mirror at 0x00000000) + * may be used for DMA. + * + * The macros below define a section size of 256MB and a non-linear virtual to + * physical mapping: + * + * 256MB @ 0x00000000 -> PAGE_OFFSET + * 512MB @ 0x20000000 -> PAGE_OFFSET + 0x10000000 + * 256MB @ 0x80000000 -> PAGE_OFFSET + 0x30000000 + */ +#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET +#error "SPARSEMEM not available with REALVIEW_HIGH_PHYS_OFFSET" +#endif + +#define MAX_PHYSMEM_BITS 32 +#define SECTION_SIZE_BITS 28 + +/* bank page offsets */ +#define PAGE_OFFSET1 (PAGE_OFFSET + 0x10000000) +#define PAGE_OFFSET2 (PAGE_OFFSET + 0x30000000) + +#define __phys_to_virt(phys) \ + ((phys) >= 0x80000000 ? (phys) - 0x80000000 + PAGE_OFFSET2 : \ + (phys) >= 0x20000000 ? (phys) - 0x20000000 + PAGE_OFFSET1 : \ + (phys) + PAGE_OFFSET) + +#define __virt_to_phys(virt) \ + ((virt) >= PAGE_OFFSET2 ? (virt) - PAGE_OFFSET2 + 0x80000000 : \ + (virt) >= PAGE_OFFSET1 ? (virt) - PAGE_OFFSET1 + 0x20000000 : \ + (virt) - PAGE_OFFSET) + +#endif /* CONFIG_SPARSEMEM */ + #endif diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 5d09d8b4a1c..ec39488e2b4 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -304,6 +304,26 @@ static struct sys_timer realview_pbx_timer = { .init = realview_pbx_timer_init, }; +static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags, + char **from, struct meminfo *meminfo) +{ +#ifdef CONFIG_SPARSEMEM + /* + * Memory configuration with SPARSEMEM enabled on RealView PBX (see + * asm/mach/memory.h for more information). + */ + meminfo->bank[0].start = 0; + meminfo->bank[0].size = SZ_256M; + meminfo->bank[1].start = 0x20000000; + meminfo->bank[1].size = SZ_512M; + meminfo->bank[2].start = 0x80000000; + meminfo->bank[2].size = SZ_256M; + meminfo->nr_banks = 3; +#else + realview_fixup(mdesc, tags, from, meminfo); +#endif +} + static void __init realview_pbx_init(void) { int i; @@ -345,7 +365,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .phys_io = REALVIEW_PBX_UART0_BASE, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, - .fixup = realview_fixup, + .fixup = realview_pbx_fixup, .map_io = realview_pbx_map_io, .init_irq = gic_init_irq, .timer = &realview_pbx_timer, -- GitLab From cb5485a0b99b232c5c7c4c21e2346f8ab7ef555d Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 21 Sep 2009 10:30:08 -0400 Subject: [PATCH 0569/1165] powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields The PCI-e addressing was originally patterned of the MPC8548CDS which has PCI1, PCI2, and PCI-e. Since this board only has PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS board. This does that by cutting the PCI/PCI-e I/O sizes from 16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000 (the hole where PCI2 I/O would have been). This also fixes a typo where an extra zero made an 8MB range a 128MB range, removes the hole left by PCI2 from the aliases, and sets the clocks to match the oscillators that are actually on the board. With accompanying u-boot updates, PCI-e has been validated with both a sky2 card (1148:9e00) and an e1000 card (8086:108b). Signed-off-by: Paul Gortmaker Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/sbc8548.dts | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts index 9eefe00ed25..94a33225171 100644 --- a/arch/powerpc/boot/dts/sbc8548.dts +++ b/arch/powerpc/boot/dts/sbc8548.dts @@ -26,8 +26,7 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; - /* pci1 doesn't have a corresponding physical connector */ - pci2 = &pci2; + pci1 = &pci1; }; cpus { @@ -381,7 +380,7 @@ bus-range = <0 0>; ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; - clock-frequency = <66666666>; + clock-frequency = <66000000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -390,7 +389,7 @@ device_type = "pci"; }; - pci2: pcie@e000a000 { + pci1: pcie@e000a000 { interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < @@ -403,9 +402,9 @@ interrupt-parent = <&mpic>; interrupts = <0x1a 0x2>; bus-range = <0x0 0xff>; - ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x01000000 0x0 0x00000000 0xe3000000 0x0 0x08000000>; - clock-frequency = <33333333>; + ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 + 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; + clock-frequency = <33000000>; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; @@ -419,11 +418,11 @@ device_type = "pci"; ranges = <0x02000000 0x0 0xa0000000 0x02000000 0x0 0xa0000000 - 0x0 0x20000000 + 0x0 0x10000000 0x01000000 0x0 0x00000000 0x01000000 0x0 0x00000000 - 0x0 0x08000000>; + 0x0 0x00800000>; }; }; }; -- GitLab From 58459a4e19e107d793a58a46780def2cea12a391 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 9 Sep 2009 16:49:57 +0200 Subject: [PATCH 0570/1165] powerpc/82xx: kmalloc failure ignored in ep8248e_mdio_probe() Prevent NULL dereference if kmalloc() fails. Also clean up if of_mdiobus_register() returns an error. Signed-off-by: Roel Kluin Acked-by: Scott Wood Signed-off-by: Kumar Gala --- arch/powerpc/platforms/82xx/ep8248e.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/82xx/ep8248e.c b/arch/powerpc/platforms/82xx/ep8248e.c index 51fcae41f08..f9aee182e6f 100644 --- a/arch/powerpc/platforms/82xx/ep8248e.c +++ b/arch/powerpc/platforms/82xx/ep8248e.c @@ -132,12 +132,25 @@ static int __devinit ep8248e_mdio_probe(struct of_device *ofdev, return -ENOMEM; bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (bus->irq == NULL) { + ret = -ENOMEM; + goto err_free_bus; + } bus->name = "ep8248e-mdio-bitbang"; bus->parent = &ofdev->dev; snprintf(bus->id, MII_BUS_ID_SIZE, "%x", res.start); - return of_mdiobus_register(bus, ofdev->node); + ret = of_mdiobus_register(bus, ofdev->node); + if (ret) + goto err_free_irq; + + return 0; +err_free_irq: + kfree(bus->irq); +err_free_bus: + free_mdio_bitbang(bus); + return ret; } static int ep8248e_mdio_remove(struct of_device *ofdev) -- GitLab From a070e66ae89978ffc16378b2d37bedf3674a9112 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 16 Oct 2009 20:50:13 +0400 Subject: [PATCH 0571/1165] powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards This patch fixes USB GPIOs numbers for MPC8569E-MDS boards, plus according to the latest HW Getting Started Guide (rev 3.3, pilot boards), USB "POWER" GPIO polarity has changed, it is no longer inverted. This patch makes USB Host somewhat work on pilot boards, though there are still some problems with determining devices speed and long bulk transfers. Reported-by: Liu Yu Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8569mds.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts index 06332d61830..1e3ec8f059b 100644 --- a/arch/powerpc/boot/dts/mpc8569mds.dts +++ b/arch/powerpc/boot/dts/mpc8569mds.dts @@ -487,8 +487,8 @@ &qe_pio_f 5 0 /* USBTN */ &qe_pio_f 6 0 /* USBRP */ &qe_pio_f 8 0 /* USBRN */ - &bcsr17 6 0 /* SPEED */ - &bcsr17 5 1>; /* POWER */ + &bcsr17 1 0 /* SPEED */ + &bcsr17 2 0>; /* POWER */ }; enet0: ucc@2000 { -- GitLab From 850f785a1f8c8448db4d70983595b2b088cf60b7 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 16 Oct 2009 20:47:22 +0400 Subject: [PATCH 0572/1165] powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boards u-boot partition size should be 0x80000 (512 KB), not 0x8000 (32 KB). Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala --- arch/powerpc/boot/dts/mpc8377_wlan.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/boot/dts/mpc8377_wlan.dts b/arch/powerpc/boot/dts/mpc8377_wlan.dts index 9a603695723..9ea78305696 100644 --- a/arch/powerpc/boot/dts/mpc8377_wlan.dts +++ b/arch/powerpc/boot/dts/mpc8377_wlan.dts @@ -67,7 +67,7 @@ device-width = <1>; partition@0 { - reg = <0 0x8000>; + reg = <0 0x80000>; label = "u-boot"; read-only; }; -- GitLab From 114785a619e3f28133a555692b3d0b417ab91e66 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Mon, 12 Oct 2009 11:35:27 -0500 Subject: [PATCH 0573/1165] powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xx Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala --- arch/powerpc/configs/mpc83xx_defconfig | 15 ++++++++------- arch/powerpc/configs/mpc85xx_defconfig | 16 ++++++++-------- arch/powerpc/configs/mpc85xx_smp_defconfig | 16 ++++++++-------- 3 files changed, 24 insertions(+), 23 deletions(-) diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 4a96cb6925b..d6d28f2a23c 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -343,7 +343,8 @@ CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -358,7 +359,7 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set @@ -1591,7 +1592,7 @@ CONFIG_CRYPTO_PCBC=m # # Hash modes # -# CONFIG_CRYPTO_HMAC is not set +CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # @@ -1605,16 +1606,16 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index ee6acc6557f..70851ee7434 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -345,7 +345,7 @@ CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m +CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -369,12 +369,12 @@ CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y @@ -1769,16 +1769,16 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index db082ce5a1c..ab45fd99afc 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -348,7 +348,7 @@ CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -CONFIG_NET_KEY=m +CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -372,12 +372,12 @@ CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set +CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y @@ -1772,16 +1772,16 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set -- GitLab From e9bcf1418c9ccff30f243005187bbfa659c2df74 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 5 Nov 2009 08:21:18 -0600 Subject: [PATCH 0574/1165] powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx Updated mpc85xx_{smp_}defconfig to enable: * XES_MPC85xx board * PCI MSI * RapidIO Signed-off-by: Kumar Gala --- arch/powerpc/configs/83xx/asp8347_defconfig | 60 +++++++++----- arch/powerpc/configs/83xx/kmeter1_defconfig | 46 +++++----- .../configs/83xx/mpc8313_rdb_defconfig | 73 ++++++++++------ .../configs/83xx/mpc8315_rdb_defconfig | 76 +++++++++++------ .../configs/83xx/mpc832x_mds_defconfig | 62 ++++++++------ .../configs/83xx/mpc832x_rdb_defconfig | 66 +++++++++------ .../configs/83xx/mpc834x_itx_defconfig | 60 +++++++++----- .../configs/83xx/mpc834x_itxgp_defconfig | 58 ++++++++----- .../configs/83xx/mpc834x_mds_defconfig | 58 ++++++++----- .../configs/83xx/mpc836x_mds_defconfig | 64 ++++++++------ .../configs/83xx/mpc836x_rdk_defconfig | 60 ++++++++------ .../configs/83xx/mpc837x_mds_defconfig | 64 +++++++++----- .../configs/83xx/mpc837x_rdb_defconfig | 70 +++++++++++----- arch/powerpc/configs/83xx/sbc834x_defconfig | 61 ++++++++------ arch/powerpc/configs/85xx/ksi8560_defconfig | 61 +++++++++----- .../configs/85xx/mpc8540_ads_defconfig | 57 ++++++++----- .../configs/85xx/mpc8560_ads_defconfig | 63 +++++++++----- .../configs/85xx/mpc85xx_cds_defconfig | 58 ++++++++----- arch/powerpc/configs/85xx/sbc8548_defconfig | 53 +++++++----- arch/powerpc/configs/85xx/sbc8560_defconfig | 57 ++++++++----- arch/powerpc/configs/85xx/socrates_defconfig | 68 +++++++++------ arch/powerpc/configs/85xx/stx_gp3_defconfig | 77 +++++++++++------ arch/powerpc/configs/85xx/tqm8540_defconfig | 59 ++++++++----- arch/powerpc/configs/85xx/tqm8541_defconfig | 64 +++++++++----- arch/powerpc/configs/85xx/tqm8548_defconfig | 64 ++++++++------ arch/powerpc/configs/85xx/tqm8555_defconfig | 64 +++++++++----- arch/powerpc/configs/85xx/tqm8560_defconfig | 64 +++++++++----- .../configs/85xx/xes_mpc85xx_defconfig | 76 ++++++++++++----- arch/powerpc/configs/86xx/gef_ppc9a_defconfig | 74 +++++++++++------ .../powerpc/configs/86xx/gef_sbc310_defconfig | 72 ++++++++++------ .../powerpc/configs/86xx/gef_sbc610_defconfig | 80 ++++++++++++------ .../configs/86xx/mpc8610_hpcd_defconfig | 64 ++++++++------ .../configs/86xx/mpc8641_hpcn_defconfig | 65 +++++++++------ arch/powerpc/configs/86xx/sbc8641d_defconfig | 66 +++++++++------ arch/powerpc/configs/adder875_defconfig | 48 +++++++---- arch/powerpc/configs/c2k_defconfig | 77 +++++++++++------ arch/powerpc/configs/ep8248e_defconfig | 49 +++++++---- arch/powerpc/configs/ep88xc_defconfig | 47 ++++++----- arch/powerpc/configs/linkstation_defconfig | 72 ++++++++++------ arch/powerpc/configs/mgcoge_defconfig | 51 ++++++++---- arch/powerpc/configs/mgsuvd_defconfig | 45 +++++----- arch/powerpc/configs/mpc7448_hpc2_defconfig | 58 ++++++++----- arch/powerpc/configs/mpc8272_ads_defconfig | 52 ++++++++---- arch/powerpc/configs/mpc83xx_defconfig | 75 +++++++++++------ arch/powerpc/configs/mpc85xx_defconfig | 82 +++++++++++------- arch/powerpc/configs/mpc85xx_smp_defconfig | 83 ++++++++++++------- arch/powerpc/configs/mpc866_ads_defconfig | 54 +++++++----- arch/powerpc/configs/mpc86xx_defconfig | 70 ++++++++++------ arch/powerpc/configs/mpc885_ads_defconfig | 47 ++++++----- arch/powerpc/configs/pq2fads_defconfig | 55 +++++++----- arch/powerpc/configs/prpmc2800_defconfig | 67 +++++++++------ arch/powerpc/configs/storcenter_defconfig | 54 +++++++----- 52 files changed, 2093 insertions(+), 1177 deletions(-) diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index a2df0635b6d..466f09ac315 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:02 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:20 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -425,9 +432,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y @@ -628,7 +635,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -658,10 +667,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -760,6 +766,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -814,9 +821,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -834,6 +838,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -883,6 +892,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -894,7 +904,6 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y @@ -934,6 +943,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -944,6 +954,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -990,6 +1001,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1045,6 +1057,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1146,6 +1159,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1215,7 +1229,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1327,6 +1340,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1344,6 +1358,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1365,7 +1380,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1407,11 +1421,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig index 93ebd443a18..6694fb73cd9 100644 --- a/arch/powerpc/configs/83xx/kmeter1_defconfig +++ b/arch/powerpc/configs/83xx/kmeter1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:03 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:21 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -86,11 +87,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -119,20 +121,19 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -140,6 +141,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -250,6 +253,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -267,6 +271,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -348,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set CONFIG_STP=m @@ -396,9 +402,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -565,18 +571,16 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -663,6 +667,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -693,9 +698,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -713,7 +715,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -732,6 +733,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -784,6 +786,7 @@ CONFIG_UIO=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -854,7 +857,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -926,6 +928,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -942,6 +945,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index ff33a7db2ea..86df19f041a 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:04 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:22 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -427,9 +434,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -488,6 +495,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -605,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -643,7 +652,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -741,9 +752,11 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -791,10 +804,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -896,6 +906,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -950,9 +961,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -984,6 +992,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -1036,6 +1049,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1048,9 +1062,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1088,8 +1100,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1099,6 +1113,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1112,7 +1127,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1164,6 +1178,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1255,6 +1270,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -1273,6 +1289,7 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -1334,6 +1351,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1384,6 +1402,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1453,7 +1472,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1569,6 +1587,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1586,6 +1605,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1604,10 +1624,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1630,10 +1652,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1660,7 +1682,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1702,11 +1723,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 76237d46670..7bf71d57703 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:05 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:23 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -427,9 +434,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -488,6 +495,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -605,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -644,11 +653,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -671,6 +683,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -698,6 +711,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -802,9 +816,11 @@ CONFIG_E100=y # CONFIG_TLAN is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -852,10 +868,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -957,6 +970,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1011,9 +1025,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1045,6 +1056,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -1097,6 +1113,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1109,9 +1126,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1149,8 +1164,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1160,6 +1177,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1173,7 +1191,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1225,6 +1242,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1316,6 +1334,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -1334,6 +1353,7 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -1395,6 +1415,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1445,6 +1466,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1514,7 +1536,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1630,6 +1651,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1647,6 +1669,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1665,10 +1688,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1691,10 +1716,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1721,7 +1746,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1763,11 +1787,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index e0e36a11340..7def83518a6 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:06 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:24 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -504,6 +511,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -542,7 +550,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -612,7 +622,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -635,7 +647,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -663,10 +674,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -759,6 +767,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -812,9 +821,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -832,6 +838,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -881,6 +892,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -892,9 +904,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -927,6 +937,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -937,6 +948,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -950,7 +962,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1070,6 +1081,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1128,7 +1140,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1202,6 +1213,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1219,6 +1231,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1240,7 +1253,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1282,11 +1294,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 4f27d454822..b398b9b2b63 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:07 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:24 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -257,6 +260,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -507,6 +514,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -545,7 +553,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -617,7 +627,9 @@ CONFIG_MII=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -640,7 +652,6 @@ CONFIG_E1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -668,10 +679,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -776,6 +784,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -830,9 +839,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -863,6 +869,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -915,6 +926,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -927,9 +939,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -967,8 +977,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -978,6 +990,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -991,7 +1004,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1043,6 +1055,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1146,6 +1159,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_SPI=y # CONFIG_MMC_CB710 is not set @@ -1186,6 +1201,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1247,7 +1263,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1365,6 +1380,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1382,6 +1398,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1403,7 +1420,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1445,11 +1461,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 648dac0c9d8..f67317e1934 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:07 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:25 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -424,9 +431,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -483,6 +490,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -637,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -676,11 +685,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -703,6 +715,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -730,6 +743,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -845,10 +859,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -930,6 +941,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -984,9 +996,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_PCF8574=y -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1017,7 +1026,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1055,8 +1063,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1066,6 +1076,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1111,6 +1122,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1238,6 +1250,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1288,6 +1301,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1350,7 +1364,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1465,6 +1478,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1482,6 +1496,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1503,7 +1518,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1545,11 +1559,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index bf6deb831dc..a668110c10f 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:08 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:26 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -424,9 +431,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set -# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -483,6 +490,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -589,6 +597,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -627,7 +636,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -725,10 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -810,6 +818,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -864,9 +873,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_PCF8574=y -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -897,7 +903,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -935,8 +940,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -946,6 +953,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -991,6 +999,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -1059,6 +1068,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1117,6 +1127,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1167,6 +1178,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1229,7 +1241,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1344,6 +1355,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1361,6 +1373,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1382,7 +1395,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1424,11 +1436,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 3236c47712c..c4e92ba5c38 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:09 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:27 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -556,9 +563,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -606,10 +615,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -699,6 +705,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -752,9 +759,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -772,6 +776,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -821,6 +830,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -832,9 +842,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -867,6 +875,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -877,6 +886,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -890,7 +900,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1010,6 +1019,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1068,7 +1078,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1140,6 +1149,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1157,6 +1167,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1178,7 +1189,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1220,11 +1230,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 8c5299d7481..4f434b1492f 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:10 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:28 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -255,6 +258,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -272,6 +276,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -367,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -396,6 +402,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -403,7 +410,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -416,6 +422,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -423,9 +430,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -585,6 +592,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -623,7 +631,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -693,7 +703,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -716,7 +728,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -744,10 +755,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -840,6 +848,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -893,9 +902,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -913,6 +919,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -962,6 +973,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -973,9 +985,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1008,6 +1018,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1018,6 +1029,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1031,7 +1043,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1151,6 +1162,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1210,7 +1222,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1284,6 +1295,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1301,6 +1313,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1322,7 +1335,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1364,11 +1376,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index ff31667a890..b52ec086167 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:12 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:30 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -255,6 +258,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -272,6 +276,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -369,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -398,6 +404,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -405,7 +412,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -418,6 +424,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -427,9 +434,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -493,6 +500,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -639,7 +647,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -649,10 +656,7 @@ CONFIG_UCC_GETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -750,6 +754,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -804,9 +809,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -853,17 +855,22 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -897,8 +904,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -908,6 +917,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -992,7 +1002,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1038,6 +1047,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1107,7 +1117,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1183,6 +1192,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1200,6 +1210,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1232,7 +1243,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1274,11 +1284,13 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index e285ec0fe95..730061574f9 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:11 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:29 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,21 +127,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -147,6 +148,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -368,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -397,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -417,6 +423,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -503,6 +510,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -542,11 +550,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -569,6 +580,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -596,6 +608,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -672,7 +685,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -720,10 +735,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -816,6 +828,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -869,9 +882,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -889,6 +899,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -938,6 +953,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -949,9 +965,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -984,6 +998,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -994,6 +1009,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1007,7 +1023,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1072,6 +1087,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1130,7 +1146,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1206,6 +1221,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1221,6 +1237,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1242,7 +1259,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1284,11 +1300,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 1ab3e4cd301..9e9158a5b19 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:13 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:30 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,21 +127,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -147,6 +148,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -256,6 +259,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -363,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -392,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -399,7 +406,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -412,6 +418,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -498,6 +505,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -537,11 +545,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -564,6 +575,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -591,6 +603,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -610,6 +623,7 @@ CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -678,7 +692,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -708,10 +724,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -813,6 +826,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -867,9 +881,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -887,6 +898,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -936,6 +952,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -947,9 +964,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -987,6 +1002,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -997,6 +1013,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1010,7 +1027,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1033,6 +1049,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1085,6 +1102,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1142,6 +1160,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1188,6 +1207,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1246,7 +1266,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1361,6 +1380,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1376,6 +1396,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1396,12 +1417,13 @@ CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1443,11 +1465,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 3a68f861b1b..6b399154970 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc5 -# Tue Aug 11 19:57:51 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:31 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,27 +126,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -254,6 +257,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -271,6 +275,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -366,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -395,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -402,7 +409,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -415,6 +421,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -422,9 +429,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -651,7 +658,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -681,10 +690,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -786,6 +792,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -840,9 +847,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -860,6 +864,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -909,6 +918,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -920,9 +930,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -960,6 +968,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -970,6 +979,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -983,7 +993,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1035,6 +1044,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1148,6 +1158,7 @@ CONFIG_JBD=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1207,7 +1218,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1306,6 +1316,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1321,6 +1332,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1342,7 +1354,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1384,11 +1395,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index ff04e1028f5..a5bde8da462 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:14 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:32 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -123,28 +126,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set CONFIG_KSI8560=y # CONFIG_XES_MPC85xx is not set @@ -243,6 +248,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,6 +266,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -348,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -377,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -384,7 +393,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +405,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -582,6 +591,8 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -591,10 +602,7 @@ CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -704,10 +712,19 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -719,9 +736,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -755,7 +770,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -818,6 +832,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -877,7 +892,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -945,6 +959,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -962,6 +977,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -981,10 +997,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1008,10 +1026,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1039,7 +1057,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1070,11 +1087,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index fb10cc83702..c10e26f8763 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:15 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:33 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,27 +129,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -189,6 +193,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -244,6 +249,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -261,6 +267,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -349,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -378,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -385,7 +394,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,6 +406,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -483,15 +492,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -588,6 +596,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -598,9 +611,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -634,7 +645,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -696,6 +706,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -754,7 +765,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -822,6 +832,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -839,6 +850,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -857,10 +869,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -883,10 +897,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -912,7 +926,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -943,11 +956,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 5c8ce697882..8d9f0a4b520 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:16 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:34 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -127,29 +130,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -192,6 +196,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -247,6 +252,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -264,6 +270,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -361,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -390,6 +398,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -397,7 +406,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -410,6 +418,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -530,7 +539,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -582,10 +593,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -698,14 +706,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -721,9 +739,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -746,6 +762,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -759,7 +776,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -824,6 +840,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -882,7 +899,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -950,6 +966,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -967,6 +984,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -985,10 +1003,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1011,10 +1031,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1040,7 +1060,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1071,11 +1090,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 158e63e8607..9b63e258dac 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:17 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:35 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,28 +129,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -245,6 +250,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -262,6 +268,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -359,6 +366,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -388,6 +396,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -395,7 +404,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -408,6 +416,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -582,7 +591,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -630,10 +641,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -737,6 +745,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -751,9 +764,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -776,6 +787,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -789,7 +801,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -854,6 +865,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -912,7 +924,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -980,6 +991,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -997,6 +1009,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1015,10 +1028,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1041,10 +1056,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1070,7 +1085,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1101,11 +1115,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 2726fca1d69..1b235683017 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:18 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:36 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,27 +128,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -242,6 +247,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -259,6 +265,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -355,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -384,6 +392,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -391,7 +400,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -404,6 +412,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -521,7 +530,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -569,10 +580,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -676,6 +684,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -690,9 +703,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -715,6 +726,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -758,6 +770,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -816,7 +829,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -872,6 +884,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -887,6 +900,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -907,7 +921,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -938,11 +951,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index b0c469823b0..959d0281431 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:19 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:37 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,26 +129,27 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -242,6 +247,7 @@ CONFIG_BINFMT_MISC=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -259,6 +265,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -347,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -376,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -383,7 +392,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -396,6 +404,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -481,15 +490,14 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -584,6 +592,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -594,9 +607,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -630,7 +641,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -721,6 +731,7 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -779,7 +790,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -847,6 +857,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -863,6 +874,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -881,10 +893,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -907,10 +921,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -947,7 +961,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -978,11 +991,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig index 04c85dada84..7f5ec35bf19 100644 --- a/arch/powerpc/configs/85xx/socrates_defconfig +++ b/arch/powerpc/configs/85xx/socrates_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:19 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:37 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=16 CONFIG_GROUP_SCHED=y @@ -124,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -193,6 +197,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set CONFIG_SOCRATES=y # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -247,6 +252,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -264,6 +270,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -358,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -396,6 +404,7 @@ CONFIG_CAN_BCM=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -403,7 +412,6 @@ CONFIG_WIRELESS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -421,9 +429,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -482,6 +490,7 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_DATAFLASH is not set # CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -668,7 +677,9 @@ CONFIG_MII=y # CONFIG_B44 is not set # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -698,10 +709,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -765,6 +773,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set @@ -774,7 +783,6 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set -# CONFIG_TOUCHSCREEN_W90X900 is not set # CONFIG_INPUT_MISC is not set # @@ -834,6 +842,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -888,9 +897,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,6 +927,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set @@ -973,6 +984,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -985,9 +997,7 @@ CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_LIS3_SPI is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1006,8 +1016,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set @@ -1017,6 +1029,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1112,7 +1125,6 @@ CONFIG_FONT_8x16=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1135,6 +1147,7 @@ CONFIG_USB_HID=y # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1184,6 +1197,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1319,6 +1333,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1369,6 +1384,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1438,7 +1454,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1552,6 +1567,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1569,6 +1585,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1589,7 +1606,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1621,11 +1637,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index e7e81d6769f..c8327e88a98 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:20 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:38 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -127,22 +130,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -150,7 +152,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -197,6 +201,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -252,6 +257,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -269,6 +275,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -426,6 +433,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -455,6 +463,7 @@ CONFIG_NET_PKTGEN=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -462,7 +471,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -475,6 +483,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -622,6 +631,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -662,7 +672,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -732,8 +744,10 @@ CONFIG_NET_ETHERNET=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_NET_POCKET is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -782,10 +796,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -827,11 +838,15 @@ CONFIG_INPUT_EVDEV=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -842,6 +857,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -909,6 +925,7 @@ CONFIG_HW_RANDOM=m CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m @@ -967,9 +984,6 @@ CONFIG_I2C_ALGOBIT=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1003,14 +1017,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1061,6 +1085,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1072,9 +1097,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1092,6 +1115,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1102,6 +1126,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # CONFIG_AGP=m +CONFIG_VGA_ARB=y CONFIG_DRM=m # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set @@ -1125,7 +1150,6 @@ CONFIG_SOUND=m # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1190,6 +1214,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1254,7 +1279,6 @@ CONFIG_CRAMFS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1352,6 +1376,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1369,6 +1394,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1388,10 +1414,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1414,10 +1442,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1443,7 +1471,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1475,11 +1502,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index 2c407523aad..82563703d5e 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:21 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:39 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -124,28 +127,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -188,6 +192,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -243,6 +248,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,6 +266,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -354,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -383,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -390,7 +399,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -677,9 +685,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -727,10 +737,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -824,6 +831,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -876,9 +884,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -896,6 +901,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -945,6 +955,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -956,9 +967,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -977,6 +986,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -987,6 +997,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1000,7 +1011,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1065,6 +1075,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1134,7 +1145,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1203,6 +1213,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1220,6 +1231,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1240,7 +1252,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1271,11 +1282,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index 845731dc51c..91d85d73382 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:22 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:40 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,29 +128,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -246,6 +251,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -263,6 +269,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -357,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -386,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -393,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -681,9 +689,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -732,10 +742,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -831,6 +838,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -886,9 +894,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,14 +926,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -979,6 +994,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -990,9 +1006,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1012,6 +1026,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1022,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1035,7 +1051,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1100,6 +1115,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1169,7 +1185,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1238,6 +1253,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1255,6 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1275,7 +1292,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1306,11 +1322,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index 4f228a90527..debe268f43d 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:23 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:41 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +86,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -126,22 +129,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -149,6 +151,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -196,6 +200,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -252,6 +257,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -269,6 +275,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -371,6 +378,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -411,6 +419,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -420,9 +429,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -630,7 +639,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -678,10 +689,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -772,6 +780,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -825,9 +834,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -845,6 +851,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -894,6 +905,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -905,9 +917,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -926,6 +936,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -936,6 +947,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -949,7 +961,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1042,6 +1053,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1111,7 +1123,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1180,6 +1191,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1197,6 +1209,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1216,10 +1229,12 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1242,10 +1257,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1271,7 +1286,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1303,11 +1317,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index 9196724bebc..74515501f5b 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:24 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:42 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,29 +128,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -246,6 +251,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -263,6 +269,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -357,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -386,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -393,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -681,9 +689,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -732,10 +742,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -831,6 +838,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -886,9 +894,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,14 +926,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -979,6 +994,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -990,9 +1006,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1012,6 +1026,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1022,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1035,7 +1051,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1100,6 +1115,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1169,7 +1185,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1238,6 +1253,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1255,6 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1275,7 +1292,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1306,11 +1322,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 2e49a6e9faf..631d92b4d4e 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:25 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:43 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -125,29 +128,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -190,6 +194,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set # CONFIG_XES_MPC85xx is not set @@ -246,6 +251,7 @@ CONFIG_MATH_EMULATION=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -263,6 +269,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -357,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -386,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -393,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -681,9 +689,11 @@ CONFIG_E100=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_FS_ENET is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set @@ -732,10 +742,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -831,6 +838,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -886,9 +894,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -921,14 +926,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +CONFIG_HWMON_DEBUG_CHIP=y + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -979,6 +994,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -990,9 +1006,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1012,6 +1026,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1022,6 +1037,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1035,7 +1051,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1100,6 +1115,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1169,7 +1185,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1238,6 +1253,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1255,6 +1271,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1275,7 +1292,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1306,11 +1322,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig index 1025da2bf06..52acbac0c4f 100644 --- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig +++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:25 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:44 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set CONFIG_SMP=y @@ -37,6 +38,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -89,11 +91,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -128,22 +131,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -151,7 +153,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -201,6 +205,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC8536_DS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_MPC85xx_RDB is not set # CONFIG_SOCRATES is not set # CONFIG_KSI8560 is not set CONFIG_XES_MPC85xx=y @@ -256,6 +261,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +279,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -405,6 +412,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -446,6 +454,7 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -457,9 +466,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set @@ -635,6 +644,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -674,11 +684,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -701,6 +714,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -728,6 +742,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -804,7 +819,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -834,10 +851,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -951,6 +965,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1006,8 +1021,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1041,14 +1054,24 @@ CONFIG_GPIO_PCA953X=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1099,6 +1122,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1110,9 +1134,7 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1151,6 +1173,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1161,6 +1184,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1181,7 +1205,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1204,6 +1227,7 @@ CONFIG_USB_HID=y # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1249,6 +1273,7 @@ CONFIG_USB_MON=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_ISP1760_HCD=y +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1466,6 +1491,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1541,7 +1567,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1658,6 +1683,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1675,6 +1701,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1694,10 +1721,12 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -1720,10 +1749,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1749,7 +1778,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1790,11 +1818,13 @@ CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index 527ad1a5e80..28980738776 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:31 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:49 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,21 +132,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -152,12 +153,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -256,6 +259,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -417,6 +422,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -458,6 +464,7 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -467,9 +474,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -680,6 +687,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -719,12 +727,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -747,6 +758,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -775,6 +787,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -851,7 +864,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -881,10 +896,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1016,6 +1028,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1071,9 +1084,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1106,14 +1116,24 @@ CONFIG_GPIO_SYSFS=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1164,6 +1184,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1175,9 +1196,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1217,6 +1236,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1227,6 +1247,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1247,7 +1268,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1270,6 +1290,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1322,6 +1343,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1397,6 +1419,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1501,6 +1524,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1576,7 +1600,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1682,6 +1705,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1697,6 +1721,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1718,7 +1743,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1761,11 +1785,13 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index cd338d493be..e199d1cacba 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:29 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:47 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,21 +132,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -152,12 +153,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -256,6 +259,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -273,6 +277,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -417,6 +422,7 @@ CONFIG_IPV6_TUNNEL=m # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -458,6 +464,7 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -467,9 +474,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -680,6 +687,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -719,12 +727,15 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SIL24=y @@ -796,7 +807,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -826,10 +839,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -961,6 +971,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1016,9 +1027,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1051,14 +1059,24 @@ CONFIG_GPIO_SYSFS=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1109,6 +1127,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1120,9 +1139,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1162,6 +1179,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1172,6 +1190,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1192,7 +1211,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1215,6 +1233,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1267,6 +1286,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1342,6 +1362,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1446,6 +1467,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1521,7 +1543,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1627,6 +1648,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1642,6 +1664,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1663,7 +1686,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1706,11 +1728,13 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index ba47883f4aa..3b0fbfb28ef 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:30 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:48 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,21 +133,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -153,12 +154,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -257,6 +260,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -503,6 +508,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set CONFIG_TIPC=m # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set @@ -582,6 +588,7 @@ CONFIG_NET_PKTGEN=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -589,7 +596,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -602,6 +608,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -611,9 +618,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -780,6 +787,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -819,11 +827,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -846,6 +857,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -873,6 +885,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -949,7 +962,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -979,10 +994,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1120,6 +1132,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1175,9 +1188,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1211,14 +1221,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1269,6 +1289,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1280,9 +1301,7 @@ CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1322,6 +1341,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1332,6 +1352,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1352,7 +1373,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1375,6 +1395,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1427,6 +1448,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1502,6 +1524,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_ATM is not set @@ -1607,6 +1630,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1669,7 +1693,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1775,6 +1798,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1791,6 +1815,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1810,10 +1835,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1837,10 +1864,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1872,7 +1899,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1915,11 +1941,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index a61f183f718..de4d52504fe 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:27 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:45 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -83,11 +84,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -126,22 +128,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -149,6 +150,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -251,6 +254,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -268,6 +272,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -385,6 +390,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -414,6 +420,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -421,7 +428,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -434,6 +440,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -445,9 +452,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -662,6 +669,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -701,11 +709,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -728,6 +739,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -755,6 +767,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -818,14 +831,13 @@ CONFIG_ULI526X=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -929,6 +941,7 @@ CONFIG_UNIX98_PTYS=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -982,9 +995,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1002,7 +1012,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1021,6 +1030,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1031,6 +1041,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1107,6 +1118,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1209,7 +1221,6 @@ CONFIG_SND_SOC_CS4270_VD33_ERRATA=y # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1329,6 +1340,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -1388,7 +1400,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1505,6 +1516,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1522,6 +1534,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1541,10 +1554,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1567,10 +1582,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1597,7 +1612,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1629,11 +1643,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 7016ce73260..754a79ba74a 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:28 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:46 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -87,11 +88,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,22 +132,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -153,7 +154,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -251,13 +254,13 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -275,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -404,6 +408,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -434,6 +439,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -441,7 +447,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -454,6 +459,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -546,6 +552,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -585,11 +592,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -612,6 +622,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -639,6 +650,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -715,7 +727,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -763,10 +777,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -880,6 +891,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -934,9 +946,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -954,7 +963,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -973,6 +981,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -983,6 +992,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1002,6 +1012,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1105,7 +1116,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1128,6 +1138,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1180,6 +1191,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1358,6 +1370,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1428,7 +1441,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1546,6 +1558,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1563,6 +1576,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1582,10 +1596,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1608,10 +1624,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1638,7 +1654,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1680,11 +1695,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index f5ca2e0cd40..89991f157ae 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:26 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:45 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -87,11 +88,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -130,21 +132,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -152,13 +153,15 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -257,6 +260,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -274,6 +278,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -502,6 +507,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set CONFIG_TIPC=m # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set @@ -581,6 +587,7 @@ CONFIG_NET_PKTGEN=m CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -588,7 +595,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -601,6 +607,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -610,9 +617,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -833,7 +840,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -863,10 +872,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -996,6 +1002,7 @@ CONFIG_HW_RANDOM=m CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1049,9 +1056,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1069,6 +1073,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1118,6 +1127,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1129,9 +1139,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1164,6 +1172,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1174,6 +1183,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1194,7 +1204,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -1274,6 +1283,7 @@ CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set # CONFIG_OCFS2_FS_POSIX_ACL is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1343,7 +1353,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1451,6 +1460,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1467,6 +1477,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1486,10 +1497,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1514,10 +1527,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1550,7 +1563,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1593,11 +1605,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index aece6bb5f73..052cf134e01 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:47 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:04 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -78,11 +80,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -116,28 +119,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -235,10 +239,10 @@ CONFIG_BINFMT_ELF=y # CONFIG_8XX_MINIMAL_FPEMU is not set # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -256,6 +260,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -338,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -367,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -374,7 +381,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -387,6 +393,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -530,16 +537,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -580,6 +586,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -590,6 +597,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -716,6 +724,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -775,7 +784,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -847,6 +855,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -864,6 +873,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -880,10 +890,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -906,10 +918,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 8105360d53f..0fb65a85dfd 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:48 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:05 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y # CONFIG_SMP is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_CHECK_CACHE_COHERENCY=y @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +90,12 @@ CONFIG_AUDIT_TREE=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -135,23 +138,24 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y # CONFIG_PERF_COUNTERS is not set +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_MARKERS=y CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y @@ -161,12 +165,14 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -275,12 +281,12 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -298,6 +304,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -309,6 +316,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_EXTRA_TARGETS="" CONFIG_PM=y # CONFIG_PM_DEBUG is not set +# CONFIG_PM_RUNTIME is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -674,10 +682,12 @@ CONFIG_BT_HCIBCM203X=m # CONFIG_BT_HCIBPA10X is not set CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIVHCI=m +# CONFIG_BT_MRVL is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -686,7 +696,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -699,6 +708,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -710,9 +720,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=m CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -763,6 +773,7 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_PCI is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -857,6 +868,7 @@ CONFIG_SCSI_SRP_ATTRS=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_3W_9XXX=m CONFIG_SCSI_ACARD=m @@ -912,7 +924,9 @@ CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -982,7 +996,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -1010,10 +1026,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1145,6 +1158,7 @@ CONFIG_MAX_RAW_DEVS=8192 CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y @@ -1200,9 +1214,6 @@ CONFIG_I2C_MV64XXX=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_PCF8574=m -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1220,6 +1231,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=m CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set CONFIG_SENSORS_ADM1021=m @@ -1269,6 +1285,7 @@ CONFIG_SENSORS_SMSC47B397=m # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set CONFIG_SENSORS_VIA686A=m # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1280,7 +1297,6 @@ CONFIG_SENSORS_W83L785TS=m # CONFIG_SENSORS_W83L786NG is not set CONFIG_SENSORS_W83627HF=m # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1317,6 +1333,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1327,6 +1344,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1378,6 +1396,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1588,6 +1607,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1668,7 +1688,6 @@ CONFIG_VXFS_FS=m # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1770,7 +1789,7 @@ CONFIG_BINARY_PRINTF=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set +CONFIG_CRC16=m CONFIG_CRC_T10DIF=m CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1797,6 +1816,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1814,6 +1834,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y @@ -1834,11 +1855,13 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set @@ -1852,6 +1875,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y @@ -1869,6 +1893,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1899,6 +1924,7 @@ CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set # CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_LSM_MMAP_MIN_ADDR=65536 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 @@ -1913,7 +1939,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=m @@ -1956,11 +1981,13 @@ CONFIG_CRYPTO_ECB=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index 0aa5b43ffeb..ef5edc7203f 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:49 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:06 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -116,28 +118,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -150,6 +153,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -233,6 +237,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -246,6 +251,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -394,6 +400,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -401,7 +408,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -413,6 +419,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -600,7 +607,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -648,10 +657,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -736,15 +742,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -767,6 +777,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -968,6 +979,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -998,10 +1010,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1024,6 +1038,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1052,7 +1067,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1094,6 +1108,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 2c292e25cc0..73ef9be4128 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:49 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:07 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -77,11 +79,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -115,28 +118,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -234,10 +238,10 @@ CONFIG_BINFMT_ELF=y CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -255,6 +259,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -337,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -366,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -373,7 +380,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -386,6 +392,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -529,16 +536,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -611,7 +617,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -672,6 +677,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -731,7 +737,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -803,6 +808,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -820,6 +826,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -836,10 +843,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -861,10 +870,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 45671e7dd2c..63c3e8de8f1 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:50 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:08 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -83,11 +84,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,22 +133,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -154,11 +155,13 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +CONFIG_SLOW_WORK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -258,6 +261,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -275,6 +279,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -482,6 +487,7 @@ CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -511,6 +517,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y @@ -519,7 +526,6 @@ CONFIG_WIRELESS_EXT_SYSFS=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -532,6 +538,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -543,9 +550,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -711,6 +718,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -750,11 +758,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -777,6 +788,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -804,6 +816,7 @@ CONFIG_PATA_IT821X=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -870,7 +883,9 @@ CONFIG_TULIP_MMIO=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -918,10 +933,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -1043,6 +1055,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1097,9 +1110,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1117,6 +1127,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1166,6 +1181,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1177,9 +1193,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1198,6 +1212,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1208,6 +1223,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1227,7 +1243,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=m -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1271,6 +1286,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1500,6 +1516,7 @@ CONFIG_XFS_FS=m # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1567,7 +1584,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1681,6 +1697,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1698,6 +1715,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1716,10 +1734,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1742,6 +1762,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1771,7 +1792,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1813,11 +1833,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=m diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index 30b68bfaceb..520b04a0def 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc5 -# Fri Aug 7 08:19:15 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:09 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -84,11 +85,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -123,28 +125,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -247,6 +250,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -260,6 +264,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -390,6 +395,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -397,7 +403,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -409,6 +414,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -608,7 +614,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FCC=y @@ -616,10 +624,7 @@ CONFIG_FS_ENET_MDIO_FCC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -685,6 +690,7 @@ CONFIG_HW_RANDOM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -740,7 +746,6 @@ CONFIG_I2C_CPM=y # # Miscellaneous I2C Chip support # -# CONFIG_PCF8575 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -771,15 +776,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -799,6 +808,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -809,6 +819,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1022,6 +1033,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1052,10 +1064,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1079,6 +1093,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1109,7 +1124,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1151,6 +1165,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index 1ae85a3b294..43c3c4fcdce 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:52 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:10 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -76,11 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 CONFIG_GROUP_SCHED=y @@ -117,27 +120,28 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -237,10 +241,10 @@ CONFIG_BINFMT_ELF=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -258,6 +262,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -344,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -373,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -380,7 +387,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -553,16 +559,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y # CONFIG_FS_ENET_HAS_FEC is not set # CONFIG_FS_ENET_MDIO_FEC is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -635,7 +640,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -707,6 +711,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -776,7 +781,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -851,6 +855,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -865,6 +870,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -887,7 +893,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -918,11 +923,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index f23428c3b34..d8b364a4594 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:53 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:10 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -123,28 +125,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -241,6 +244,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -258,6 +262,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -350,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -379,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -386,7 +393,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -399,6 +405,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -478,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -517,11 +525,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -543,6 +554,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -570,6 +582,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -666,9 +679,11 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -715,10 +730,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -822,6 +834,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set @@ -836,9 +853,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -861,6 +876,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -874,7 +890,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -939,6 +954,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -997,7 +1013,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1069,6 +1084,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1086,6 +1102,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1107,7 +1124,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1138,11 +1154,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index 02716f72db6..00fad81b6fc 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:54 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:11 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -116,29 +118,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -151,6 +154,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -236,6 +240,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -249,6 +254,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -397,6 +403,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -404,7 +411,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -416,6 +422,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -477,7 +484,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_SBC8240 is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -604,7 +610,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -652,10 +660,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -704,6 +709,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -714,6 +720,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -793,15 +800,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -824,6 +835,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1032,6 +1044,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1067,10 +1080,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1093,6 +1108,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1121,7 +1137,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1163,6 +1178,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index d6d28f2a23c..64dff21516c 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:55 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:12 2009 # # CONFIG_PPC64 is not set @@ -35,6 +35,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -86,11 +87,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -127,21 +129,20 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -149,6 +150,8 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -263,6 +266,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -280,6 +284,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -378,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -407,6 +413,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -414,7 +421,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -427,6 +433,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -434,9 +441,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -609,6 +616,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -648,11 +656,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -675,6 +686,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -702,6 +714,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -778,7 +791,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -801,7 +816,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -829,10 +843,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -936,6 +947,7 @@ CONFIG_GEN_RTC=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -991,9 +1003,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1026,14 +1035,24 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1084,6 +1103,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1095,9 +1115,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1136,6 +1154,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1146,6 +1165,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1159,7 +1179,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1182,6 +1201,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1234,6 +1254,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_FHCI_HCD is not set @@ -1292,6 +1313,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set @@ -1339,6 +1361,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1398,7 +1421,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1515,6 +1537,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1530,6 +1553,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1551,7 +1575,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1594,11 +1617,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 70851ee7434..a12e7ba87a4 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:55 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:25:20 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set # CONFIG_SMP is not set @@ -36,6 +37,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +90,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,22 +134,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -154,7 +156,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -189,6 +193,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -206,7 +211,7 @@ CONFIG_MPC85xx_DS=y CONFIG_MPC85xx_RDB=y CONFIG_SOCRATES=y CONFIG_KSI8560=y -# CONFIG_XES_MPC85xx is not set +CONFIG_XES_MPC85xx=y CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -259,10 +264,10 @@ CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -280,6 +285,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -307,7 +313,7 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set +CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set @@ -315,7 +321,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y -# CONFIG_RAPIDIO is not set +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_DISC_TIMEOUT=30 # # Advanced setup @@ -411,6 +418,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -441,6 +449,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -448,7 +457,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -461,6 +469,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -554,6 +563,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -593,11 +603,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -620,6 +633,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -647,6 +661,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -723,7 +738,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FCC=y @@ -750,7 +767,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -778,10 +794,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -798,6 +811,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set +# CONFIG_RIONET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set @@ -898,6 +912,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -955,9 +970,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -991,15 +1003,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1020,6 +1036,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1030,6 +1047,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1049,6 +1067,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1152,7 +1171,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1175,6 +1193,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1227,6 +1246,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1241,7 +1261,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1429,6 +1448,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1499,7 +1519,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1620,6 +1639,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1637,6 +1657,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1656,10 +1677,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1683,10 +1706,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1714,7 +1737,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1757,11 +1779,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index ab45fd99afc..cd70b4a4ce0 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:56 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:26:01 2009 # # CONFIG_PPC64 is not set @@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y CONFIG_PPC_BOOK3E_MMU=y # CONFIG_PPC_MM_SLICES is not set CONFIG_SMP=y @@ -37,6 +38,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -89,11 +91,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -132,22 +135,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -155,8 +157,10 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -192,6 +196,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support @@ -206,9 +211,10 @@ CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC8536_DS=y CONFIG_MPC85xx_DS=y +CONFIG_MPC85xx_RDB=y CONFIG_SOCRATES=y CONFIG_KSI8560=y -# CONFIG_XES_MPC85xx is not set +CONFIG_XES_MPC85xx=y CONFIG_STX_GP3=y CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -261,11 +267,11 @@ CONFIG_BINFMT_MISC=m CONFIG_MATH_EMULATION=y CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -283,6 +289,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -310,7 +317,7 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_PCI_MSI is not set +CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set @@ -318,7 +325,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y -# CONFIG_RAPIDIO is not set +CONFIG_RAPIDIO=y +CONFIG_RAPIDIO_DISC_TIMEOUT=30 # # Advanced setup @@ -414,6 +422,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -444,6 +453,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -451,7 +461,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -464,6 +473,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -557,6 +567,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -596,11 +607,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -623,6 +637,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -650,6 +665,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -726,7 +742,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FCC=y @@ -753,7 +771,6 @@ CONFIG_NETDEV_1000=y CONFIG_FSL_PQ_MDIO=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y -# CONFIG_UGETH_MAGIC_PACKET is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -781,10 +798,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -801,6 +815,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set +# CONFIG_RIONET is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set @@ -901,6 +916,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -958,9 +974,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -994,15 +1007,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1023,6 +1040,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1033,6 +1051,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1052,6 +1071,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1155,7 +1175,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1178,6 +1197,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1230,6 +1250,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1244,7 +1265,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set -# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1432,6 +1452,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1502,7 +1523,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1623,6 +1643,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1640,6 +1661,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1659,10 +1681,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1686,10 +1710,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1717,7 +1741,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y @@ -1760,11 +1783,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 6809b61ed3d..40d6f0568ca 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:57 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:15 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -76,11 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -113,28 +116,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -233,10 +237,10 @@ CONFIG_BINFMT_ELF=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -254,6 +258,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -340,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -369,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -376,7 +383,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -467,6 +473,8 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y CONFIG_FS_ENET_HAS_SCC=y CONFIG_FS_ENET_HAS_FEC=y @@ -476,10 +484,7 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set # CONFIG_MV643XX_ETH is not set CONFIG_NETDEV_10000=y - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -520,6 +525,7 @@ CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -530,6 +536,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set @@ -595,6 +602,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set @@ -605,9 +617,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -641,7 +651,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -705,6 +714,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -763,7 +773,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -836,6 +845,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -851,6 +861,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -871,7 +882,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -902,11 +912,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 0e8684a3138..5b3abb42ae3 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:58 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:16 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -88,11 +89,12 @@ CONFIG_AUDIT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -131,22 +133,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -154,7 +155,9 @@ CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -253,13 +256,13 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_IOMMU_HELPER=y CONFIG_SWIOTLB=y -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -277,6 +280,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -406,6 +410,7 @@ CONFIG_IP_SCTP=m # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -436,6 +441,7 @@ CONFIG_SCTP_HMAC_MD5=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -443,7 +449,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -456,6 +461,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -549,6 +555,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -588,11 +595,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -615,6 +625,7 @@ CONFIG_ATA_SFF=y CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -642,6 +653,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -718,7 +730,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -766,10 +780,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -883,6 +894,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set CONFIG_I2C_HELPER_AUTO=y @@ -938,9 +950,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -974,15 +983,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1003,6 +1016,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1013,6 +1027,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1032,6 +1047,7 @@ CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1135,7 +1151,6 @@ CONFIG_SND_USB=y CONFIG_AC97_BUS=y CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1158,6 +1173,7 @@ CONFIG_HID_CYPRESS=y CONFIG_HID_EZKEY=y # CONFIG_HID_KYE is not set CONFIG_HID_GYRATION=y +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1210,6 +1226,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y CONFIG_USB_OHCI_HCD_PPC_OF_LE=y @@ -1389,6 +1406,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1459,7 +1477,6 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1577,6 +1594,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1594,6 +1612,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1613,10 +1632,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1639,10 +1660,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 @@ -1669,7 +1690,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1711,11 +1731,13 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=m +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index dbe8e869a82..1da3488a603 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:31:59 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:17 2009 # # CONFIG_PPC64 is not set @@ -16,6 +16,7 @@ CONFIG_PPC_8xx=y # CONFIG_E200 is not set CONFIG_8xx=y CONFIG_PPC_MMU_NOHASH=y +CONFIG_PPC_MMU_NOHASH_32=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -29,6 +30,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -77,11 +79,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -115,28 +118,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -241,10 +245,10 @@ CONFIG_BINFMT_ELF=y CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -262,6 +266,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -344,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -373,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -380,7 +387,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -393,6 +399,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -540,16 +547,15 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FEC=y CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -622,7 +628,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -683,6 +688,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set @@ -742,7 +748,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -814,6 +819,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -831,6 +837,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -847,10 +854,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -872,10 +881,10 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set -# CONFIG_KMEMCHECK is not set # CONFIG_PPC_DISABLE_WERROR is not set CONFIG_PPC_WERROR=y CONFIG_PRINT_STACK_DEPTH=64 diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index ff96bb43c32..b7911216af7 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:00 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:17 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -120,29 +122,30 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -155,6 +158,7 @@ CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -239,6 +243,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -252,6 +257,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -401,6 +407,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_BT is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -408,7 +415,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -420,6 +426,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -481,7 +488,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y -# CONFIG_MTD_SBC8240 is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -664,7 +670,9 @@ CONFIG_MII=y # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_FS_ENET=y # CONFIG_FS_ENET_HAS_SCC is not set CONFIG_FS_ENET_HAS_FCC=y @@ -712,10 +720,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -764,6 +769,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set @@ -774,6 +780,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -855,15 +862,19 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -886,6 +897,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -905,7 +917,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # @@ -922,6 +933,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C_HSOTG is not set # CONFIG_USB_GADGET_IMX is not set @@ -940,6 +952,7 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -1148,6 +1161,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1183,10 +1197,12 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -1209,6 +1225,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1237,7 +1254,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1279,6 +1295,7 @@ CONFIG_CRYPTO_PCBC=y # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index 1293c465d7f..ef50ce45d50 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:01 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:18 2009 # # CONFIG_PPC64 is not set @@ -36,6 +36,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -85,11 +86,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -131,28 +133,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -244,12 +247,12 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set # CONFIG_SWIOTLB is not set -CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -267,6 +270,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -360,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -389,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -396,7 +402,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -409,6 +414,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -633,6 +639,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -672,11 +679,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -698,6 +708,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -725,6 +736,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -823,9 +835,11 @@ CONFIG_8139TOO=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set +# CONFIG_XILINX_EMACLITE is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -871,10 +885,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_SFC is not set # CONFIG_BE2NET is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -977,6 +988,7 @@ CONFIG_LEGACY_PTY_COUNT=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -1031,9 +1043,6 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1051,6 +1060,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1100,6 +1114,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1111,9 +1126,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1132,6 +1145,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -1142,6 +1156,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -1162,7 +1177,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1186,6 +1200,7 @@ CONFIG_HID_DRAGONRISE=y CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1239,6 +1254,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1404,6 +1420,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1463,7 +1480,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set @@ -1576,6 +1592,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1593,6 +1610,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1614,7 +1632,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1645,11 +1662,13 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index 28384dc0100..524263158fc 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc4 -# Wed Jul 29 23:32:01 2009 +# Linux kernel version: 2.6.32-rc5 +# Thu Nov 5 08:20:19 2009 # # CONFIG_PPC64 is not set @@ -34,6 +34,7 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -82,11 +83,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -118,28 +120,29 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y -CONFIG_HAVE_PERF_COUNTERS=y +CONFIG_HAVE_PERF_EVENTS=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_API_DEBUG=y # # GCOV-based kernel profiling @@ -243,6 +246,7 @@ CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_MAX_ACTIVE_REGIONS=32 CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -260,6 +264,7 @@ CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_4K_PAGES=y # CONFIG_PPC_16K_PAGES is not set @@ -349,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -378,6 +384,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set # CONFIG_LIB80211 is not set @@ -385,7 +392,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y # # CFG80211 needs to be enabled for MAC80211 # -CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,6 +404,7 @@ CONFIG_MAC80211_DEFAULT_PS_VALUE=0 # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -405,9 +412,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -619,6 +626,7 @@ CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -657,7 +665,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set @@ -670,6 +680,7 @@ CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set CONFIG_MD_RAID456=y CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set @@ -729,10 +740,7 @@ CONFIG_R8169=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -813,6 +821,7 @@ CONFIG_NVRAM=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -867,9 +876,6 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -887,7 +893,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -906,6 +911,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set @@ -916,6 +922,7 @@ CONFIG_SSB_POSSIBLE=y # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -961,6 +968,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set @@ -1141,6 +1149,7 @@ CONFIG_XFS_FS=m # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -1210,7 +1219,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_EXPORTFS=m @@ -1307,6 +1315,7 @@ CONFIG_GENERIC_ATOMIC64=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -1324,6 +1333,7 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_PPC_DISABLE_WERROR is not set @@ -1344,6 +1354,8 @@ CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set # CONFIG_VIRTUALIZATION is not set -- GitLab From 22aecebfd9498c4779e5c5bed1d2d054bd99f7a4 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 21 Oct 2009 18:01:37 -0700 Subject: [PATCH 0575/1165] acpi-power-meter: Don't leak ACPI error codes to userspace If the ACPI methods return an error code, we must return -EINVAL to userspace to flag the error. Right now we pass the (positive) number right through, which causes echo to keep writing bogus values. Signed-off-by: Darrick J. Wong Acked-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/power_meter.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index e6bfd77986b..2ef7030a0c2 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -294,7 +294,11 @@ static int set_acpi_trip(struct acpi_power_meter_resource *resource) return -EINVAL; } - return data; + /* _PTP returns 0 on success, nonzero otherwise */ + if (data) + return -EINVAL; + + return 0; } static ssize_t set_trip(struct device *dev, struct device_attribute *devattr, -- GitLab From 78987bdc4e41a425ac113c2c51474f0368fe653a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 5 Nov 2009 09:22:30 -0800 Subject: [PATCH 0576/1165] ALSA: hda, move hp_bseries_system Function hp_bseries_system() is always used, outside of CONFIG_ boundaries/controls, so move it. sound/pci/hda/patch_sigmatel.c:5458: error: implicit declaration of function 'hp_bseries_system' Signed-off-by: Randy Dunlap Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 40 +++++++++++++++++----------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index b513eba2d2f..8eb6508cd99 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4668,6 +4668,26 @@ static void stac92xx_unsol_event(struct hda_codec *codec, unsigned int res) } } +static int hp_bseries_system(u32 subsystem_id) +{ + switch (subsystem_id) { + case 0x103c307e: + case 0x103c307f: + case 0x103c3080: + case 0x103c3081: + case 0x103c1722: + case 0x103c1723: + case 0x103c1724: + case 0x103c1725: + case 0x103c1726: + case 0x103c1727: + case 0x103c1728: + case 0x103c1729: + return 1; + } + return 0; +} + #ifdef CONFIG_PROC_FS static void stac92hd_proc_hook(struct snd_info_buffer *buffer, struct hda_codec *codec, hda_nid_t nid) @@ -4733,26 +4753,6 @@ static int stac92xx_resume(struct hda_codec *codec) return 0; } -static int hp_bseries_system(u32 subsystem_id) -{ - switch (subsystem_id) { - case 0x103c307e: - case 0x103c307f: - case 0x103c3080: - case 0x103c3081: - case 0x103c1722: - case 0x103c1723: - case 0x103c1724: - case 0x103c1725: - case 0x103c1726: - case 0x103c1727: - case 0x103c1728: - case 0x103c1729: - return 1; - } - return 0; -} - /* * using power check for controlling mute led of HP notebooks * check for mute state only on Speakers (nid = 0x10) -- GitLab From d39b7dd1dcbf394a1cb897457c862dafe9a20ac5 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 5 Nov 2009 10:48:30 -0800 Subject: [PATCH 0577/1165] sgi-gru: decrapfiy options_write() function Not a single line of actual code in the function was really fundamentally correct. Problems ranged from lack of proper range checking, to removing the last character written (which admittedly is usually '\n'), to not accepting hex numbers even though the 'show' routine would show the data in that format. This tries to do better. Acked-by: Michael Buesch Tested-and-acked-by: Jack Steiner Cc: stable@kernel.org Cc: Jiri Kosina Cc: Michael Gilbert Signed-off-by: Linus Torvalds --- drivers/misc/sgi-gru/gruprocfs.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/misc/sgi-gru/gruprocfs.c b/drivers/misc/sgi-gru/gruprocfs.c index ccd4408a26c..3f2375c5ba5 100644 --- a/drivers/misc/sgi-gru/gruprocfs.c +++ b/drivers/misc/sgi-gru/gruprocfs.c @@ -161,14 +161,15 @@ static int options_show(struct seq_file *s, void *p) static ssize_t options_write(struct file *file, const char __user *userbuf, size_t count, loff_t *data) { - unsigned long val; - char buf[80]; + char buf[20]; - if (strncpy_from_user(buf, userbuf, sizeof(buf) - 1) < 0) + if (count >= sizeof(buf)) + return -EINVAL; + if (copy_from_user(buf, userbuf, count)) return -EFAULT; - buf[count - 1] = '\0'; - if (!strict_strtoul(buf, 10, &val)) - gru_options = val; + buf[count] = '\0'; + if (strict_strtoul(buf, 0, &gru_options)) + return -EINVAL; return count; } -- GitLab From d525753bf30fe29a2897273e180fc24723350dcc Mon Sep 17 00:00:00 2001 From: Jean-Christop PLAGNIOL-VILLARD Date: Mon, 2 Nov 2009 20:13:32 +0100 Subject: [PATCH 0578/1165] ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function __raw_readl and IOMEM Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: H Hartley Sweeten Signed-off-by: Russell King --- arch/arm/mach-ep93xx/micro9.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c index d83b80478b0..f3757a1c5a1 100644 --- a/arch/arm/mach-ep93xx/micro9.c +++ b/arch/arm/mach-ep93xx/micro9.c @@ -15,6 +15,7 @@ #include #include #include +#include #include -- GitLab From c742239866250a5690485ab775b942c85c6bee63 Mon Sep 17 00:00:00 2001 From: zeal Date: Tue, 3 Nov 2009 02:36:55 +0100 Subject: [PATCH 0579/1165] ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c NOTE: 1. Macro style is so strange. 2. The value 0xc0 is not match with KS8695 manual. It should be 0x0c. Signed-off-by: zeal Acked-by: Andrew Victor Signed-off-by: Russell King --- arch/arm/mach-ks8695/include/mach/regs-switch.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h index 56d12e8de89..97e8acb1cf6 100644 --- a/arch/arm/mach-ks8695/include/mach/regs-switch.h +++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h @@ -25,7 +25,7 @@ #define KS8695_SEC1 (0x04) /* Switch Engine Control 1 */ #define KS8695_SEC2 (0x08) /* Switch Engine Control 2 */ -#define KS8695_P(x)_C(z) (0xc0 + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ +#define KS8695_SEPXCZ(x,z) (0x0c + (((x)-1)*3 + ((z)-1))*4) /* Port Configuration Registers */ #define KS8695_SEP12AN (0x48) /* Port 1 & 2 Auto-Negotiation */ #define KS8695_SEP34AN (0x4c) /* Port 3 & 4 Auto-Negotiation */ -- GitLab From 2c75910f1aa042be1dd769378d2611bf551721ac Mon Sep 17 00:00:00 2001 From: Chris Lalancette Date: Thu, 5 Nov 2009 11:47:08 +0100 Subject: [PATCH 0580/1165] x86: Make sure get_user_desc() doesn't sign extend. The current implementation of get_user_desc() sign extends the return value because of integer promotion rules. For the most part, this doesn't matter, because the top bit of base2 is usually 0. If, however, that bit is 1, then the entire value will be 0xffff... which is probably not what the caller intended. This patch casts the entire thing to unsigned before returning, which generates almost the same assembly as the current code but replaces the final "cltq" (sign extend) with a "mov %eax %eax" (zero-extend). This fixes booting certain guests under KVM. Signed-off-by: Chris Lalancette Signed-off-by: Linus Torvalds --- arch/x86/include/asm/desc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h index e8de2f6f5ca..617bd56b307 100644 --- a/arch/x86/include/asm/desc.h +++ b/arch/x86/include/asm/desc.h @@ -288,7 +288,7 @@ static inline void load_LDT(mm_context_t *pc) static inline unsigned long get_desc_base(const struct desc_struct *desc) { - return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24); + return (unsigned)(desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24)); } static inline void set_desc_base(struct desc_struct *desc, unsigned long base) -- GitLab From ba86bf8bfc1add5f515db8cf1d6042bb9396a299 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Tue, 20 Oct 2009 16:29:16 +0000 Subject: [PATCH 0581/1165] drm/i915: Avoid potential sleep whilst holding spinlock Miles Lane reported the following error: 2 locks held by cat/4179: #0: (&p->lock){+.+.+.}, at: [] seq_read+0x25/0x315 #1: (&dev_priv->mm.active_list_lock){+.+...}, at: [] i915_batchbuffer_info+0x2b/0x124 Pid: 4179, comm: cat Not tainted 2.6.32-rc5-git1 #2 Call Trace: [] ? __debug_show_held_locks+0x1e/0x20 [] __might_sleep+0xf0/0xf7 [] kmap+0x17/0x58 [] i915_batchbuffer_info+0xad/0x124 [] seq_read+0x160/0x315 [] ? rw_verify_area+0x98/0xbb [] ? seq_read+0x0/0x315 [] vfs_read+0x75/0xa9 [] sys_read+0x3b/0x5d [] sysenter_do_call+0x12/0x36 The fix is relatively simple, use the atomic variants of kmap() that avoid the potential sleep. Signed-off-by: Chris Wilson Cc: Miles Lane Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index f8ce9a3a420..26bf0552b3c 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -267,10 +267,10 @@ static void i915_dump_pages(struct seq_file *m, struct page **pages, int page_co uint32_t *mem; for (page = 0; page < page_count; page++) { - mem = kmap(pages[page]); + mem = kmap_atomic(pages[page], KM_USER0); for (i = 0; i < PAGE_SIZE; i += 4) seq_printf(m, "%08x : %08x\n", i, mem[i / 4]); - kunmap(pages[page]); + kunmap_atomic(pages[page], KM_USER0); } } -- GitLab From 941b10fab2cbd90ac7ad6bc2338ffe30e1d3ce53 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Thu, 5 Nov 2009 16:51:40 -0500 Subject: [PATCH 0582/1165] ACPI: add __cpuinit to acpi_processor_add() Annote acpi_processor_add with cpuinit since it calls a cpuinit function acpi_processor_power_init and fixes a section mismatch warning. We were warned by the following warning: LD drivers/acpi/processor.o WARNING: drivers/acpi/processor.o(.text+0x1829): Section mismatch in reference from the function acpi_processor_add() to the function .cpuinit.text:acpi_processor_power_init() The function acpi_processor_add() references the function __cpuinit acpi_processor_power_init(). This is often because acpi_processor_add lacks a __cpuinit annotation or the annotation of acpi_processor_power_init is wrong. Signed-off-by: Rakib Mullick Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index c567b46dfa0..ec742a4e563 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -770,7 +770,7 @@ static struct notifier_block acpi_cpu_notifier = .notifier_call = acpi_cpu_soft_notify, }; -static int acpi_processor_add(struct acpi_device *device) +static int __cpuinit acpi_processor_add(struct acpi_device *device) { struct acpi_processor *pr = NULL; int result = 0; -- GitLab From 4bfe6b6876a036d26a960320f1ab0bbd752c19bf Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 2 Nov 2009 07:52:29 +0000 Subject: [PATCH 0583/1165] drm/i915: Fix and cleanup DPLL calculation for Ironlake When the ideal error range can't be reached, this will safely use a most closed one. Clean up some dumb codes in DPLL function too. This fixes DPLL clock issue against one monitor at 1680x1050@60hz. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_display.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3ba6546b7c7..099f420de57 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -863,10 +863,8 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; intel_clock_t clock; - int max_n; - bool found; int err_most = 47; - found = false; + int err_min = 10000; /* eDP has only 2 clock choice, no n/m/p setting */ if (HAS_eDP) @@ -890,10 +888,9 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, } memset(best_clock, 0, sizeof(*best_clock)); - max_n = limit->n.max; for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { /* based on hardware requriment prefer smaller n to precision */ - for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { + for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { /* based on hardware requirment prefere larger m1,m2 */ for (clock.m1 = limit->m1.max; clock.m1 >= limit->m1.min; clock.m1--) { @@ -907,18 +904,18 @@ intel_igdng_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, this_err = abs((10000 - (target*10000/clock.dot))); if (this_err < err_most) { *best_clock = clock; - err_most = this_err; - max_n = clock.n; - found = true; /* found on first matching */ goto out; + } else if (this_err < err_min) { + *best_clock = clock; + err_min = this_err; } } } } } out: - return found; + return true; } /* DisplayPort has only two frequencies, 162MHz and 270MHz */ -- GitLab From d410ee5109a1633a686a5663c6743a92e1181f9b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 22 Oct 2009 09:11:11 +0800 Subject: [PATCH 0584/1165] ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine." Ensure that memory mappings created for operation regions do not cross page boundaries. Crossing a page boundary while mapping regions can cause warnings if the pages have different attributes. Such regions are probably BIOS bugs, and this is the workaround. http://bugzilla.kernel.org/show_bug.cgi?id=14445 [Kernel summit hacking hour] Signed-off-by: Bob Moore Acked-by: Suresh Siddha Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acconfig.h | 4 ++-- drivers/acpi/acpica/exregion.c | 35 ++++++++++++++++++++++++---------- 2 files changed, 27 insertions(+), 12 deletions(-) diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index 8e679ef5b23..a4471e3d385 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -103,9 +103,9 @@ #define ACPI_MAX_REFERENCE_COUNT 0x1000 -/* Size of cached memory mapping for system memory operation region */ +/* Default page size for use in mapping memory for operation regions */ -#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096 +#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ /* owner_id tracking. 8 entries allows for 255 owner_ids */ diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 3a54b737d2d..2bd83ac57c3 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -77,7 +77,8 @@ acpi_ex_system_memory_space_handler(u32 function, void *logical_addr_ptr = NULL; struct acpi_mem_space_context *mem_info = region_context; u32 length; - acpi_size window_size; + acpi_size map_length; + acpi_size page_boundary_map_length; #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED u32 remainder; #endif @@ -144,25 +145,39 @@ acpi_ex_system_memory_space_handler(u32 function, } /* - * Don't attempt to map memory beyond the end of the region, and - * constrain the maximum mapping size to something reasonable. + * Attempt to map from the requested address to the end of the region. + * However, we will never map more than one page, nor will we cross + * a page boundary. */ - window_size = (acpi_size) + map_length = (acpi_size) ((mem_info->address + mem_info->length) - address); - if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) { - window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE; + /* + * If mapping the entire remaining portion of the region will cross + * a page boundary, just map up to the page boundary, do not cross. + * On some systems, crossing a page boundary while mapping regions + * can cause warnings if the pages have different attributes + * due to resource management + */ + page_boundary_map_length = + ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address; + + if (!page_boundary_map_length) { + page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE; + } + + if (map_length > page_boundary_map_length) { + map_length = page_boundary_map_length; } /* Create a new mapping starting at the address given */ - mem_info->mapped_logical_address = - acpi_os_map_memory((acpi_physical_address) address, window_size); + mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length); if (!mem_info->mapped_logical_address) { ACPI_ERROR((AE_INFO, "Could not map memory at %8.8X%8.8X, size %X", ACPI_FORMAT_NATIVE_UINT(address), - (u32) window_size)); + (u32) map_length)); mem_info->mapped_length = 0; return_ACPI_STATUS(AE_NO_MEMORY); } @@ -170,7 +185,7 @@ acpi_ex_system_memory_space_handler(u32 function, /* Save the physical address and mapping size */ mem_info->mapped_physical_address = address; - mem_info->mapped_length = window_size; + mem_info->mapped_length = map_length; } /* -- GitLab From d8a2d0e00c0d5a0d55e14b884bff034205015e51 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Mon, 2 Nov 2009 07:52:30 +0000 Subject: [PATCH 0585/1165] drm/i915: HDMI hardware workaround for Ironlake This brings some hardware workaround for HDMI port on PCH (Ibex Peak), which fixes unstable issues like during rotation. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_hdmi.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 663ab6de0b5..c33451aec1b 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -77,14 +77,32 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv; u32 temp; - if (mode != DRM_MODE_DPMS_ON) { - temp = I915_READ(hdmi_priv->sdvox_reg); + temp = I915_READ(hdmi_priv->sdvox_reg); + + /* HW workaround, need to toggle enable bit off and on for 12bpc, but + * we do this anyway which shows more stable in testing. + */ + if (IS_IGDNG(dev)) { I915_WRITE(hdmi_priv->sdvox_reg, temp & ~SDVO_ENABLE); + POSTING_READ(hdmi_priv->sdvox_reg); + } + + if (mode != DRM_MODE_DPMS_ON) { + temp &= ~SDVO_ENABLE; } else { - temp = I915_READ(hdmi_priv->sdvox_reg); - I915_WRITE(hdmi_priv->sdvox_reg, temp | SDVO_ENABLE); + temp |= SDVO_ENABLE; } + + I915_WRITE(hdmi_priv->sdvox_reg, temp); POSTING_READ(hdmi_priv->sdvox_reg); + + /* HW workaround, need to write this twice for issue that may result + * in first write getting masked. + */ + if (IS_IGDNG(dev)) { + I915_WRITE(hdmi_priv->sdvox_reg, temp); + POSTING_READ(hdmi_priv->sdvox_reg); + } } static void intel_hdmi_save(struct drm_connector *connector) -- GitLab From 5cfa245b0b63c3d79568e78a1ee3d00654d5517d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:34:39 +0200 Subject: [PATCH 0586/1165] ACPI: Move dereference after NULL test If the NULL test on pr is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 4c6c14c1e30..1c5d7a8b2fd 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1133,15 +1133,15 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) int result = 0; struct acpi_processor_throttling *pthrottling; + if (!pr) + return -EINVAL; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", pr->throttling.address, pr->throttling.duty_offset, pr->throttling.duty_width)); - if (!pr) - return -EINVAL; - /* * Evaluate _PTC, _TSS and _TPC * They must all be present or none of them can be used. -- GitLab From 625120a42bd4371da98808a4ca3e7589083a06d8 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 16 Oct 2009 12:46:02 +0300 Subject: [PATCH 0587/1165] acpi: thermal: Add EOL to the trip_point_N_type strings Make the trip_point_N_type sysfs files return a string ending in EOL for consistency with other sysfs files. Signed-off-by: Amit Kucheria Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/thermal/thermal_sys.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 4e83c297ec9..6f8d8f97121 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -180,15 +180,15 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr, switch (type) { case THERMAL_TRIP_CRITICAL: - return sprintf(buf, "critical"); + return sprintf(buf, "critical\n"); case THERMAL_TRIP_HOT: - return sprintf(buf, "hot"); + return sprintf(buf, "hot\n"); case THERMAL_TRIP_PASSIVE: - return sprintf(buf, "passive"); + return sprintf(buf, "passive\n"); case THERMAL_TRIP_ACTIVE: - return sprintf(buf, "active"); + return sprintf(buf, "active\n"); default: - return sprintf(buf, "unknown"); + return sprintf(buf, "unknown\n"); } } -- GitLab From 38bb0849a6799e05bb474a88f198522ae4ecace2 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 26 Oct 2009 08:38:59 +0100 Subject: [PATCH 0588/1165] thermal: sysfs-api.txt - reformat for improved readability The document currently uses large indentations which make the text too wide for easy readability. Also improve general consistency. Signed-off-by: Frans Pop Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- Documentation/thermal/sysfs-api.txt | 380 ++++++++++++++-------------- 1 file changed, 192 insertions(+), 188 deletions(-) diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 70d68ce8640..895337f8c6b 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -1,5 +1,5 @@ Generic Thermal Sysfs driver How To -========================= +=================================== Written by Sujith Thomas , Zhang Rui @@ -10,20 +10,20 @@ Copyright (c) 2008 Intel Corporation 0. Introduction -The generic thermal sysfs provides a set of interfaces for thermal zone devices (sensors) -and thermal cooling devices (fan, processor...) to register with the thermal management -solution and to be a part of it. +The generic thermal sysfs provides a set of interfaces for thermal zone +devices (sensors) and thermal cooling devices (fan, processor...) to register +with the thermal management solution and to be a part of it. -This how-to focuses on enabling new thermal zone and cooling devices to participate -in thermal management. -This solution is platform independent and any type of thermal zone devices and -cooling devices should be able to make use of the infrastructure. +This how-to focuses on enabling new thermal zone and cooling devices to +participate in thermal management. +This solution is platform independent and any type of thermal zone devices +and cooling devices should be able to make use of the infrastructure. -The main task of the thermal sysfs driver is to expose thermal zone attributes as well -as cooling device attributes to the user space. -An intelligent thermal management application can make decisions based on inputs -from thermal zone attributes (the current temperature and trip point temperature) -and throttle appropriate devices. +The main task of the thermal sysfs driver is to expose thermal zone attributes +as well as cooling device attributes to the user space. +An intelligent thermal management application can make decisions based on +inputs from thermal zone attributes (the current temperature and trip point +temperature) and throttle appropriate devices. [0-*] denotes any positive number starting from 0 [1-*] denotes any positive number starting from 1 @@ -31,77 +31,77 @@ and throttle appropriate devices. 1. thermal sysfs driver interface functions 1.1 thermal zone device interface -1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, int trips, - void *devdata, struct thermal_zone_device_ops *ops) - - This interface function adds a new thermal zone device (sensor) to - /sys/class/thermal folder as thermal_zone[0-*]. - It tries to bind all the thermal cooling devices registered at the same time. - - name: the thermal zone name. - trips: the total number of trip points this thermal zone supports. - devdata: device private data - ops: thermal zone device call-backs. - .bind: bind the thermal zone device with a thermal cooling device. - .unbind: unbind the thermal zone device with a thermal cooling device. - .get_temp: get the current temperature of the thermal zone. - .get_mode: get the current mode (user/kernel) of the thermal zone. - "kernel" means thermal management is done in kernel. - "user" will prevent kernel thermal driver actions upon trip points - so that user applications can take charge of thermal management. - .set_mode: set the mode (user/kernel) of the thermal zone. - .get_trip_type: get the type of certain trip point. - .get_trip_temp: get the temperature above which the certain trip point - will be fired. +1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name, + int trips, void *devdata, struct thermal_zone_device_ops *ops) + + This interface function adds a new thermal zone device (sensor) to + /sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the + thermal cooling devices registered at the same time. + + name: the thermal zone name. + trips: the total number of trip points this thermal zone supports. + devdata: device private data + ops: thermal zone device call-backs. + .bind: bind the thermal zone device with a thermal cooling device. + .unbind: unbind the thermal zone device with a thermal cooling device. + .get_temp: get the current temperature of the thermal zone. + .get_mode: get the current mode (user/kernel) of the thermal zone. + - "kernel" means thermal management is done in kernel. + - "user" will prevent kernel thermal driver actions upon trip points + so that user applications can take charge of thermal management. + .set_mode: set the mode (user/kernel) of the thermal zone. + .get_trip_type: get the type of certain trip point. + .get_trip_temp: get the temperature above which the certain trip point + will be fired. 1.1.2 void thermal_zone_device_unregister(struct thermal_zone_device *tz) - This interface function removes the thermal zone device. - It deletes the corresponding entry form /sys/class/thermal folder and unbind all - the thermal cooling devices it uses. + This interface function removes the thermal zone device. + It deletes the corresponding entry form /sys/class/thermal folder and + unbind all the thermal cooling devices it uses. 1.2 thermal cooling device interface 1.2.1 struct thermal_cooling_device *thermal_cooling_device_register(char *name, - void *devdata, struct thermal_cooling_device_ops *) - - This interface function adds a new thermal cooling device (fan/processor/...) to - /sys/class/thermal/ folder as cooling_device[0-*]. - It tries to bind itself to all the thermal zone devices register at the same time. - name: the cooling device name. - devdata: device private data. - ops: thermal cooling devices call-backs. - .get_max_state: get the Maximum throttle state of the cooling device. - .get_cur_state: get the Current throttle state of the cooling device. - .set_cur_state: set the Current throttle state of the cooling device. + void *devdata, struct thermal_cooling_device_ops *) + + This interface function adds a new thermal cooling device (fan/processor/...) + to /sys/class/thermal/ folder as cooling_device[0-*]. It tries to bind itself + to all the thermal zone devices register at the same time. + name: the cooling device name. + devdata: device private data. + ops: thermal cooling devices call-backs. + .get_max_state: get the Maximum throttle state of the cooling device. + .get_cur_state: get the Current throttle state of the cooling device. + .set_cur_state: set the Current throttle state of the cooling device. 1.2.2 void thermal_cooling_device_unregister(struct thermal_cooling_device *cdev) - This interface function remove the thermal cooling device. - It deletes the corresponding entry form /sys/class/thermal folder and unbind - itself from all the thermal zone devices using it. + This interface function remove the thermal cooling device. + It deletes the corresponding entry form /sys/class/thermal folder and + unbind itself from all the thermal zone devices using it. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev); - This interface function bind a thermal cooling device to the certain trip point - of a thermal zone device. - This function is usually called in the thermal zone device .bind callback. - tz: the thermal zone device - cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + This interface function bind a thermal cooling device to the certain trip + point of a thermal zone device. + This function is usually called in the thermal zone device .bind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev); - This interface function unbind a thermal cooling device from the certain trip point - of a thermal zone device. - This function is usually called in the thermal zone device .unbind callback. - tz: the thermal zone device - cdev: thermal cooling device - trip: indicates which trip point the cooling devices is associated with - in this thermal zone. + This interface function unbind a thermal cooling device from the certain + trip point of a thermal zone device. This function is usually called in + the thermal zone device .unbind callback. + tz: the thermal zone device + cdev: thermal cooling device + trip: indicates which trip point the cooling devices is associated with + in this thermal zone. 2. sysfs attributes structure @@ -114,153 +114,157 @@ if hwmon is compiled in or built as a module. Thermal zone device sys I/F, created once it's registered: /sys/class/thermal/thermal_zone[0-*]: - |-----type: Type of the thermal zone - |-----temp: Current temperature - |-----mode: Working mode of the thermal zone - |-----trip_point_[0-*]_temp: Trip point temperature - |-----trip_point_[0-*]_type: Trip point type + |---type: Type of the thermal zone + |---temp: Current temperature + |---mode: Working mode of the thermal zone + |---trip_point_[0-*]_temp: Trip point temperature + |---trip_point_[0-*]_type: Trip point type Thermal cooling device sys I/F, created once it's registered: /sys/class/thermal/cooling_device[0-*]: - |-----type : Type of the cooling device(processor/fan/...) - |-----max_state: Maximum cooling state of the cooling device - |-----cur_state: Current cooling state of the cooling device + |---type: Type of the cooling device(processor/fan/...) + |---max_state: Maximum cooling state of the cooling device + |---cur_state: Current cooling state of the cooling device -These two dynamic attributes are created/removed in pairs. -They represent the relationship between a thermal zone and its associated cooling device. -They are created/removed for each -thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device successful execution. +Then next two dynamic attributes are created/removed in pairs. They represent +the relationship between a thermal zone and its associated cooling device. +They are created/removed for each successful execution of +thermal_zone_bind_cooling_device/thermal_zone_unbind_cooling_device. -/sys/class/thermal/thermal_zone[0-*] - |-----cdev[0-*]: The [0-*]th cooling device in the current thermal zone - |-----cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with +/sys/class/thermal/thermal_zone[0-*]: + |---cdev[0-*]: [0-*]th cooling device in current thermal zone + |---cdev[0-*]_trip_point: Trip point that cdev[0-*] is associated with Besides the thermal zone device sysfs I/F and cooling device sysfs I/F, -the generic thermal driver also creates a hwmon sysfs I/F for each _type_ of -thermal zone device. E.g. the generic thermal driver registers one hwmon class device -and build the associated hwmon sysfs I/F for all the registered ACPI thermal zones. +the generic thermal driver also creates a hwmon sysfs I/F for each _type_ +of thermal zone device. E.g. the generic thermal driver registers one hwmon +class device and build the associated hwmon sysfs I/F for all the registered +ACPI thermal zones. + /sys/class/hwmon/hwmon[0-*]: - |-----name: The type of the thermal zone devices. - |-----temp[1-*]_input: The current temperature of thermal zone [1-*]. - |-----temp[1-*]_critical: The critical trip point of thermal zone [1-*]. + |---name: The type of the thermal zone devices + |---temp[1-*]_input: The current temperature of thermal zone [1-*] + |---temp[1-*]_critical: The critical trip point of thermal zone [1-*] + Please read Documentation/hwmon/sysfs-interface for additional information. *************************** * Thermal zone attributes * *************************** -type Strings which represent the thermal zone type. - This is given by thermal zone driver as part of registration. - Eg: "acpitz" indicates it's an ACPI thermal device. - In order to keep it consistent with hwmon sys attribute, - this should be a short, lowercase string, - not containing spaces nor dashes. - RO - Required - -temp Current temperature as reported by thermal zone (sensor) - Unit: millidegree Celsius - RO - Required - -mode One of the predefined values in [kernel, user] - This file gives information about the algorithm - that is currently managing the thermal zone. - It can be either default kernel based algorithm - or user space application. - RW - Optional - kernel = Thermal management in kernel thermal zone driver. - user = Preventing kernel thermal zone driver actions upon - trip points so that user application can take full - charge of the thermal management. - -trip_point_[0-*]_temp The temperature above which trip point will be fired - Unit: millidegree Celsius - RO - Optional - -trip_point_[0-*]_type Strings which indicate the type of the trip point - E.g. it can be one of critical, hot, passive, - active[0-*] for ACPI thermal zone. - RO - Optional - -cdev[0-*] Sysfs link to the thermal cooling device node where the sys I/F - for cooling device throttling control represents. - RO - Optional - -cdev[0-*]_trip_point The trip point with which cdev[0-*] is associated in this thermal zone - -1 means the cooling device is not associated with any trip point. - RO - Optional - -****************************** -* Cooling device attributes * -****************************** - -type String which represents the type of device - eg: For generic ACPI: this should be "Fan", - "Processor" or "LCD" - eg. For memory controller device on intel_menlow platform: - this should be "Memory controller" - RO - Required - -max_state The maximum permissible cooling state of this cooling device. - RO - Required - -cur_state The current cooling state of this cooling device. - the value can any integer numbers between 0 and max_state, - cur_state == 0 means no cooling - cur_state == max_state means the maximum cooling. - RW - Required +type + Strings which represent the thermal zone type. + This is given by thermal zone driver as part of registration. + E.g: "acpitz" indicates it's an ACPI thermal device. + In order to keep it consistent with hwmon sys attribute; this should + be a short, lowercase string, not containing spaces nor dashes. + RO, Required + +temp + Current temperature as reported by thermal zone (sensor). + Unit: millidegree Celsius + RO, Required + +mode + One of the predefined values in [kernel, user]. + This file gives information about the algorithm that is currently + managing the thermal zone. It can be either default kernel based + algorithm or user space application. + kernel = Thermal management in kernel thermal zone driver. + user = Preventing kernel thermal zone driver actions upon + trip points so that user application can take full + charge of the thermal management. + RW, Optional + +trip_point_[0-*]_temp + The temperature above which trip point will be fired. + Unit: millidegree Celsius + RO, Optional + +trip_point_[0-*]_type + Strings which indicate the type of the trip point. + E.g. it can be one of critical, hot, passive, active[0-*] for ACPI + thermal zone. + RO, Optional + +cdev[0-*] + Sysfs link to the thermal cooling device node where the sys I/F + for cooling device throttling control represents. + RO, Optional + +cdev[0-*]_trip_point + The trip point with which cdev[0-*] is associated in this thermal + zone; -1 means the cooling device is not associated with any trip + point. + RO, Optional + +***************************** +* Cooling device attributes * +***************************** + +type + String which represents the type of device, e.g: + - for generic ACPI: should be "Fan", "Processor" or "LCD" + - for memory controller device on intel_menlow platform: + should be "Memory controller". + RO, Required + +max_state + The maximum permissible cooling state of this cooling device. + RO, Required + +cur_state + The current cooling state of this cooling device. + The value can any integer numbers between 0 and max_state: + - cur_state == 0 means no cooling + - cur_state == max_state means the maximum cooling. + RW, Required 3. A simple implementation -ACPI thermal zone may support multiple trip points like critical/hot/passive/active. -If an ACPI thermal zone supports critical, passive, active[0] and active[1] at the same time, -it may register itself as a thermal_zone_device (thermal_zone1) with 4 trip points in all. -It has one processor and one fan, which are both registered as thermal_cooling_device. -If the processor is listed in _PSL method, and the fan is listed in _AL0 method, -the sys I/F structure will be built like this: +ACPI thermal zone may support multiple trip points like critical, hot, +passive, active. If an ACPI thermal zone supports critical, passive, +active[0] and active[1] at the same time, it may register itself as a +thermal_zone_device (thermal_zone1) with 4 trip points in all. +It has one processor and one fan, which are both registered as +thermal_cooling_device. + +If the processor is listed in _PSL method, and the fan is listed in _AL0 +method, the sys I/F structure will be built like this: /sys/class/thermal: |thermal_zone1: - |-----type: acpitz - |-----temp: 37000 - |-----mode: kernel - |-----trip_point_0_temp: 100000 - |-----trip_point_0_type: critical - |-----trip_point_1_temp: 80000 - |-----trip_point_1_type: passive - |-----trip_point_2_temp: 70000 - |-----trip_point_2_type: active0 - |-----trip_point_3_temp: 60000 - |-----trip_point_3_type: active1 - |-----cdev0: --->/sys/class/thermal/cooling_device0 - |-----cdev0_trip_point: 1 /* cdev0 can be used for passive */ - |-----cdev1: --->/sys/class/thermal/cooling_device3 - |-----cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ + |---type: acpitz + |---temp: 37000 + |---mode: kernel + |---trip_point_0_temp: 100000 + |---trip_point_0_type: critical + |---trip_point_1_temp: 80000 + |---trip_point_1_type: passive + |---trip_point_2_temp: 70000 + |---trip_point_2_type: active0 + |---trip_point_3_temp: 60000 + |---trip_point_3_type: active1 + |---cdev0: --->/sys/class/thermal/cooling_device0 + |---cdev0_trip_point: 1 /* cdev0 can be used for passive */ + |---cdev1: --->/sys/class/thermal/cooling_device3 + |---cdev1_trip_point: 2 /* cdev1 can be used for active[0]*/ |cooling_device0: - |-----type: Processor - |-----max_state: 8 - |-----cur_state: 0 + |---type: Processor + |---max_state: 8 + |---cur_state: 0 |cooling_device3: - |-----type: Fan - |-----max_state: 2 - |-----cur_state: 0 + |---type: Fan + |---max_state: 2 + |---cur_state: 0 /sys/class/hwmon: |hwmon0: - |-----name: acpitz - |-----temp1_input: 37000 - |-----temp1_crit: 100000 + |---name: acpitz + |---temp1_input: 37000 + |---temp1_crit: 100000 -- GitLab From 29226ed3c3b5cd0b2b0b1fb40ffeac3f796b80e9 Mon Sep 17 00:00:00 2001 From: Frans Pop Date: Mon, 26 Oct 2009 08:39:00 +0100 Subject: [PATCH 0589/1165] thermal: sysfs-api.txt - document passive attribute for thermal zones Signed-off-by: Frans Pop Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- Documentation/thermal/sysfs-api.txt | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index 895337f8c6b..a87dc277a5c 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -199,6 +199,15 @@ cdev[0-*]_trip_point point. RO, Optional +passive + Attribute is only present for zones in which the passive cooling + policy is not supported by native thermal driver. Default is zero + and can be set to a temperature (in millidegrees) to enable a + passive trip point for the zone. Activation is done by polling with + an interval of 1 second. + Unit: millidegrees Celsius + RW, Optional + ***************************** * Cooling device attributes * ***************************** -- GitLab From ee59f2b462b0a7d2eb57ae59340d016589fa8e42 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 13:11:46 -0500 Subject: [PATCH 0590/1165] drm/radeon/kms/r600: fix rs880 support v2 Lots of cases were wrong or missing. v2: rebased against drm-next Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 18 ++++++++++++------ drivers/gpu/drm/radeon/r600_blit_kms.c | 2 +- drivers/gpu/drm/radeon/radeon_atombios.c | 3 ++- 3 files changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 3e5703f324b..35360b09df3 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -858,7 +858,8 @@ void r600_gpu_init(struct radeon_device *rdev) ((rdev->family) == CHIP_RV630) || ((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { WREG32(DB_DEBUG, PREZ_MUST_WAIT_FOR_POSTZ_DONE); } else { WREG32(DB_DEBUG, 0); @@ -875,7 +876,8 @@ void r600_gpu_init(struct radeon_device *rdev) tmp = RREG32(SQ_MS_FIFO_SIZES); if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { tmp = (CACHE_FIFO_SIZE(0xa) | FETCH_FIFO_HIWATER(0xa) | DONE_FIFO_HIWATER(0xe0) | @@ -918,7 +920,8 @@ void r600_gpu_init(struct radeon_device *rdev) NUM_ES_STACK_ENTRIES(0)); } else if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { /* no vertex cache */ sq_config &= ~VC_ENABLE; @@ -975,7 +978,8 @@ void r600_gpu_init(struct radeon_device *rdev) if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(TC_ONLY)); } else { WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(VC_AND_TC)); @@ -1001,8 +1005,9 @@ void r600_gpu_init(struct radeon_device *rdev) tmp = rdev->config.r600.max_pipes * 16; switch (rdev->family) { case CHIP_RV610: - case CHIP_RS780: case CHIP_RV620: + case CHIP_RS780: + case CHIP_RS880: tmp += 32; break; case CHIP_RV670: @@ -1043,8 +1048,9 @@ void r600_gpu_init(struct radeon_device *rdev) switch (rdev->family) { case CHIP_RV610: - case CHIP_RS780: case CHIP_RV620: + case CHIP_RS780: + case CHIP_RS880: tmp = TC_L2_SIZE(8); break; case CHIP_RV630: diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index acae33e2ad5..dbf716e1fbf 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -368,7 +368,7 @@ set_default_state(struct radeon_device *rdev) if ((rdev->family == CHIP_RV610) || (rdev->family == CHIP_RV620) || (rdev->family == CHIP_RS780) || - (rdev->family == CHIP_RS780) || + (rdev->family == CHIP_RS880) || (rdev->family == CHIP_RV710)) sq_config = 0; else diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1c9a9c46176..050722492b4 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -277,7 +277,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_DEVICE_CV_SUPPORT) continue; - if ((rdev->family == CHIP_RS780) && + /* IGP chips */ + if ((rdev->flags & RADEON_IS_IGP) && (con_obj_id == CONNECTOR_OBJECT_ID_PCIE_CONNECTOR)) { uint16_t igp_offset = 0; -- GitLab From 4170a6c1bc106d7fcf94f5842224ac4dac61006b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 01:16:23 -0500 Subject: [PATCH 0591/1165] drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 2aa5994a29d..355b0fbed92 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -725,10 +725,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) if (ASIC_IS_DCE32(rdev)) { if (radeon_encoder->pixel_clock > 165000) { - args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 2) / 100); + args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); args.v2.acConfig.fDualLinkConnector = 1; } else { - args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 4) / 100); + args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); } if (dig->dig_block) args.v2.acConfig.ucEncoderSel = 1; @@ -754,7 +754,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) } } else { args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; - args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock) / 10); + if (radeon_encoder->pixel_clock > 165000) + args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); + else + args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: -- GitLab From b75fad0682caacb16012582deecbd7d19bc2f68e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 13:16:01 -0500 Subject: [PATCH 0592/1165] drm/radeon/kms: store detailed connector info This will be useful for mode validation and certain atom tables. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 76 +++++++++- drivers/gpu/drm/radeon/radeon_combios.c | 162 +++++++++++++++------ drivers/gpu/drm/radeon/radeon_connectors.c | 8 +- drivers/gpu/drm/radeon/radeon_mode.h | 1 + 4 files changed, 199 insertions(+), 48 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 050722492b4..80aacded85a 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -46,7 +46,8 @@ radeon_add_atom_connector(struct drm_device *dev, uint32_t supported_device, int connector_type, struct radeon_i2c_bus_rec *i2c_bus, - bool linkb, uint32_t igp_lane_info); + bool linkb, uint32_t igp_lane_info, + uint16_t connector_object_id); /* from radeon_legacy_encoder.c */ extern void @@ -193,6 +194,23 @@ const int supported_devices_connector_convert[] = { DRM_MODE_CONNECTOR_DisplayPort }; +const uint16_t supported_devices_connector_object_id_convert[] = { + CONNECTOR_OBJECT_ID_NONE, + CONNECTOR_OBJECT_ID_VGA, + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I, /* not all boards support DL */ + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D, /* not all boards support DL */ + CONNECTOR_OBJECT_ID_VGA, /* technically DVI-A */ + CONNECTOR_OBJECT_ID_COMPOSITE, + CONNECTOR_OBJECT_ID_SVIDEO, + CONNECTOR_OBJECT_ID_LVDS, + CONNECTOR_OBJECT_ID_9PIN_DIN, + CONNECTOR_OBJECT_ID_9PIN_DIN, + CONNECTOR_OBJECT_ID_DISPLAYPORT, + CONNECTOR_OBJECT_ID_HDMI_TYPE_A, + CONNECTOR_OBJECT_ID_HDMI_TYPE_B, + CONNECTOR_OBJECT_ID_SVIDEO +}; + const int object_connector_convert[] = { DRM_MODE_CONNECTOR_Unknown, DRM_MODE_CONNECTOR_DVII, @@ -229,7 +247,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_OBJECT_HEADER *obj_header; int i, j, path_size, device_support; int connector_type; - uint16_t igp_lane_info, conn_id; + uint16_t igp_lane_info, conn_id, connector_object_id; bool linkb; struct radeon_i2c_bus_rec ddc_bus; @@ -312,6 +330,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) connector_type = object_connector_convert [ct]; + connector_object_id = ct; igp_lane_info = slot_config & 0xffff; } else @@ -322,6 +341,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) igp_lane_info = 0; connector_type = object_connector_convert[con_obj_id]; + connector_object_id = con_obj_id; } if (connector_type == DRM_MODE_CONNECTOR_Unknown) @@ -426,7 +446,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) le16_to_cpu(path-> usDeviceTag), connector_type, &ddc_bus, - linkb, igp_lane_info); + linkb, igp_lane_info, + connector_object_id); } } @@ -436,6 +457,45 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) return true; } +static uint16_t atombios_get_connector_object_id(struct drm_device *dev, + int connector_type, + uint16_t devices) +{ + struct radeon_device *rdev = dev->dev_private; + + if (rdev->flags & RADEON_IS_IGP) { + return supported_devices_connector_object_id_convert + [connector_type]; + } else if (((connector_type == DRM_MODE_CONNECTOR_DVII) || + (connector_type == DRM_MODE_CONNECTOR_DVID)) && + (devices & ATOM_DEVICE_DFP2_SUPPORT)) { + struct radeon_mode_info *mode_info = &rdev->mode_info; + struct atom_context *ctx = mode_info->atom_context; + int index = GetIndexIntoMasterTable(DATA, XTMDS_Info); + uint16_t size, data_offset; + uint8_t frev, crev; + ATOM_XTMDS_INFO *xtmds; + + atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset); + xtmds = (ATOM_XTMDS_INFO *)(ctx->bios + data_offset); + + if (xtmds->ucSupportedLink & ATOM_XTMDS_SUPPORTED_DUALLINK) { + if (connector_type == DRM_MODE_CONNECTOR_DVII) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + } else { + if (connector_type == DRM_MODE_CONNECTOR_DVII) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + } + } else { + return supported_devices_connector_object_id_convert + [connector_type]; + } +} + struct bios_connector { bool valid; uint16_t line_mux; @@ -594,14 +654,20 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct /* add the connectors */ for (i = 0; i < ATOM_MAX_SUPPORTED_DEVICE; i++) { - if (bios_connectors[i].valid) + if (bios_connectors[i].valid) { + uint16_t connector_object_id = + atombios_get_connector_object_id(dev, + bios_connectors[i].connector_type, + bios_connectors[i].devices); radeon_add_atom_connector(dev, bios_connectors[i].line_mux, bios_connectors[i].devices, bios_connectors[i]. connector_type, &bios_connectors[i].ddc_bus, - false, 0); + false, 0, + connector_object_id); + } } radeon_link_encoder_connector(dev); diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index a36ede002ee..5253cbf6db1 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -49,7 +49,8 @@ radeon_add_legacy_connector(struct drm_device *dev, uint32_t connector_id, uint32_t supported_device, int connector_type, - struct radeon_i2c_bus_rec *i2c_bus); + struct radeon_i2c_bus_rec *i2c_bus, + uint16_t connector_object_id); /* from radeon_legacy_encoder.c */ extern void @@ -1176,7 +1177,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else if (rdev->flags & RADEON_IS_MOBILITY) { /* LVDS */ ddc_i2c = combios_setup_i2c_bus(RADEON_LCD_GPIO_MASK); @@ -1188,7 +1190,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, DRM_MODE_CONNECTOR_LVDS, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); @@ -1200,7 +1203,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else { /* DVI-I - tv dac, int tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC); @@ -1218,7 +1222,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, DRM_MODE_CONNECTOR_DVII, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); @@ -1230,7 +1235,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } if (rdev->family != CHIP_R100 && rdev->family != CHIP_R200) { @@ -1243,7 +1249,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); } break; case CT_IBOOK: @@ -1257,7 +1264,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - TV DAC */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1266,7 +1274,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1275,7 +1284,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_EXTERNAL: DRM_INFO("Connector Table: %d (powerbook external tmds)\n", @@ -1288,7 +1298,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* DVI-I - primary dac, ext tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1301,10 +1312,12 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_CRT1_SUPPORT, 1), ATOM_DEVICE_CRT1_SUPPORT); + /* XXX some are SL */ radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1313,7 +1326,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_INTERNAL: DRM_INFO("Connector Table: %d (powerbook internal tmds)\n", @@ -1326,7 +1340,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* DVI-I - primary dac, int tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1342,7 +1357,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1351,7 +1367,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_VGA: DRM_INFO("Connector Table: %d (powerbook vga)\n", @@ -1364,7 +1381,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1373,7 +1391,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 1), ATOM_DEVICE_CRT1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1382,7 +1401,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_MINI_EXTERNAL: DRM_INFO("Connector Table: %d (mini external tmds)\n", @@ -1399,10 +1419,12 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_CRT2_SUPPORT, 2), ATOM_DEVICE_CRT2_SUPPORT); + /* XXX are any DL? */ radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1411,7 +1433,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_MINI_INTERNAL: DRM_INFO("Connector Table: %d (mini internal tmds)\n", @@ -1431,7 +1454,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1440,7 +1464,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_IMAC_G5_ISIGHT: DRM_INFO("Connector Table: %d (imac g5 isight)\n", @@ -1453,7 +1478,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_DFP1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP1_SUPPORT, - DRM_MODE_CONNECTOR_DVID, &ddc_i2c); + DRM_MODE_CONNECTOR_DVID, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D); /* VGA - tv dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC); radeon_add_legacy_encoder(dev, @@ -1462,7 +1488,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1471,7 +1498,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_EMAC: DRM_INFO("Connector Table: %d (emac)\n", @@ -1484,7 +1512,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 1), ATOM_DEVICE_CRT1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* VGA - tv dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_CRT2_DDC); radeon_add_legacy_encoder(dev, @@ -1493,7 +1522,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1502,7 +1532,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; default: DRM_INFO("Connector table: %d (invalid)\n", @@ -1596,11 +1627,46 @@ static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) return true; } +static uint16_t combios_check_dl_dvi(struct drm_device *dev, int is_dvi_d) +{ + struct radeon_device *rdev = dev->dev_private; + uint32_t ext_tmds_info; + + if (rdev->flags & RADEON_IS_IGP) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + } + ext_tmds_info = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE); + if (ext_tmds_info) { + uint8_t rev = RBIOS8(ext_tmds_info); + uint8_t flags = RBIOS8(ext_tmds_info + 4 + 5); + if (rev >= 3) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + } else { + if (flags & 1) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + } + } + } + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; +} + bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; uint32_t conn_info, entry, devices; - uint16_t tmp; + uint16_t tmp, connector_object_id; enum radeon_combios_ddc ddc_type; enum radeon_combios_connector connector; int i = 0; @@ -1660,7 +1726,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D); break; case CONNECTOR_CRT_LEGACY: if (tmp & 0x1) { @@ -1685,7 +1752,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); break; case CONNECTOR_DVI_I_LEGACY: devices = 0; @@ -1714,6 +1782,7 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_DFP2_SUPPORT, 0), ATOM_DEVICE_DFP2_SUPPORT); + connector_object_id = combios_check_dl_dvi(dev, 0); } else { devices |= ATOM_DEVICE_DFP1_SUPPORT; radeon_add_legacy_encoder(dev, @@ -1722,19 +1791,24 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_DFP1_SUPPORT, 0), ATOM_DEVICE_DFP1_SUPPORT); + connector_object_id = CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; } radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + connector_object_id); break; case CONNECTOR_DVI_D_LEGACY: - if ((tmp >> 4) & 0x1) + if ((tmp >> 4) & 0x1) { devices = ATOM_DEVICE_DFP2_SUPPORT; - else + connector_object_id = combios_check_dl_dvi(dev, 1); + } else { devices = ATOM_DEVICE_DFP1_SUPPORT; + connector_object_id = CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + } radeon_add_legacy_encoder(dev, radeon_get_encoder_id (dev, devices, 0), @@ -1742,7 +1816,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + connector_object_id); break; case CONNECTOR_CTV_LEGACY: case CONNECTOR_STV_LEGACY: @@ -1756,7 +1831,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; default: DRM_ERROR("Unknown connector type: %d\n", @@ -1788,7 +1864,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_DFP1_SUPPORT, DRM_MODE_CONNECTOR_DVII, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); } else { uint16_t crt_info = combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); @@ -1804,7 +1881,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) 0, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else { DRM_DEBUG("No connector info found\n"); return false; @@ -1903,7 +1981,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) 5, ATOM_DEVICE_LCD1_SUPPORT, DRM_MODE_CONNECTOR_LVDS, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); } } @@ -1923,7 +2002,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, 6, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); } } } diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index ce3a785a633..fb4d9184704 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -823,7 +823,8 @@ radeon_add_atom_connector(struct drm_device *dev, int connector_type, struct radeon_i2c_bus_rec *i2c_bus, bool linkb, - uint32_t igp_lane_info) + uint32_t igp_lane_info, + uint16_t connector_object_id) { struct radeon_device *rdev = dev->dev_private; struct drm_connector *connector; @@ -862,6 +863,7 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; radeon_connector->shared_ddc = shared_ddc; + radeon_connector->connector_object_id = connector_object_id; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); @@ -1013,7 +1015,8 @@ radeon_add_legacy_connector(struct drm_device *dev, uint32_t connector_id, uint32_t supported_device, int connector_type, - struct radeon_i2c_bus_rec *i2c_bus) + struct radeon_i2c_bus_rec *i2c_bus, + uint16_t connector_object_id) { struct radeon_device *rdev = dev->dev_private; struct drm_connector *connector; @@ -1042,6 +1045,7 @@ radeon_add_legacy_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; + radeon_connector->connector_object_id = connector_object_id; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index ccb783868ad..ace726aa0d7 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -317,6 +317,7 @@ struct radeon_connector { struct edid *edid; void *con_priv; bool dac_load_detect; + uint16_t connector_object_id; }; struct radeon_framebuffer { -- GitLab From f95a9f0b05d22cffc46fbd2d065b260f8405e43f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 02:21:06 -0500 Subject: [PATCH 0593/1165] drm/radeon/kms/atom/dce3: call transmitter init on mode set Generally this is done at post, but might not always be done with softboot or for connectors on docking stations. Could probably be done once when the driver loads/resumes rather than on each mode set. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 355b0fbed92..d42bc512d75 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -722,14 +722,17 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev); args.v1.ucAction = action; - + if (action == ATOM_TRANSMITTER_ACTION_INIT) { + args.v1.usInitInfo = radeon_connector->connector_object_id; + } else { + if (radeon_encoder->pixel_clock > 165000) + args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); + else + args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); + } if (ASIC_IS_DCE32(rdev)) { - if (radeon_encoder->pixel_clock > 165000) { + if (radeon_encoder->pixel_clock > 165000) args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); - args.v2.acConfig.fDualLinkConnector = 1; - } else { - args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); - } if (dig->dig_block) args.v2.acConfig.ucEncoderSel = 1; @@ -754,10 +757,6 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) } } else { args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; - if (radeon_encoder->pixel_clock > 165000) - args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); - else - args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: @@ -1140,6 +1139,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, /* setup and enable the encoder and transmitter */ atombios_dig_encoder_setup(encoder, ATOM_ENABLE); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_INIT); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE); break; -- GitLab From a3fa6320ce964f799388b152a1b0f6e2c3b32a7f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 11:57:07 -0500 Subject: [PATCH 0594/1165] drm/radeon/kms: initial mode validation support Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 48 +++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index fb4d9184704..fce4c4087fd 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -397,6 +397,30 @@ static int radeon_lvds_get_modes(struct drm_connector *connector) static int radeon_lvds_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct drm_encoder *encoder = radeon_best_single_encoder(connector); + + if ((mode->hdisplay < 320) || (mode->vdisplay < 240)) + return MODE_PANEL; + + if (encoder) { + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; + + /* AVIVO hardware supports downscaling modes larger than the panel + * to the panel size, but I'm not sure this is desirable. + */ + if ((mode->hdisplay > native_mode->hdisplay) || + (mode->vdisplay > native_mode->vdisplay)) + return MODE_PANEL; + + /* if scaling is disabled, block non-native modes */ + if (radeon_encoder->rmx_type == RMX_OFF) { + if ((mode->hdisplay != native_mode->hdisplay) || + (mode->vdisplay != native_mode->vdisplay)) + return MODE_PANEL; + } + } + return MODE_OK; } @@ -512,6 +536,8 @@ static int radeon_vga_get_modes(struct drm_connector *connector) static int radeon_vga_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + /* XXX check mode bandwidth */ + /* XXX verify against max DAC output frequency */ return MODE_OK; } @@ -609,6 +635,8 @@ static int radeon_tv_get_modes(struct drm_connector *connector) static int radeon_tv_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + if ((mode->hdisplay > 1024) || (mode->vdisplay > 768)) + return MODE_CLOCK_RANGE; return MODE_OK; } @@ -801,9 +829,27 @@ static void radeon_dvi_force(struct drm_connector *connector) radeon_connector->use_digital = true; } +static int radeon_dvi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct radeon_connector *radeon_connector = to_radeon_connector(connector); + + /* XXX check mode bandwidth */ + + if (radeon_connector->use_digital && (mode->clock > 165000)) { + if ((radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I) || + (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) || + (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B)) + return MODE_OK; + else + return MODE_CLOCK_HIGH; + } + return MODE_OK; +} + struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = { .get_modes = radeon_dvi_get_modes, - .mode_valid = radeon_vga_mode_valid, + .mode_valid = radeon_dvi_mode_valid, .best_encoder = radeon_dvi_encoder, }; -- GitLab From 24395a85d8efe6eee477ea35c73d045a8dd7a3a1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 6 Nov 2009 14:59:27 +1100 Subject: [PATCH 0595/1165] md: don't clear endpoint for resync when resync is interrupted. If a 'sync_max' has been set (via sysfs), it is wrong to clear it until a resync (or reshape or recovery ...) actually reached that point. So if a resync is interrupted (e.g. by device failure), leave 'resync_max' unchanged. This is particularly important for 'reshape' operations that do not change the size of the array. For such operations mdadm needs to monitor the reshape taking rolling backups of the section being reshaped. If resync_max gets cleared, the reshape can get ahead of mdadm and then the backups that mdadm creates are useless. This is suitable for 2.6.31.y stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/md.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 10eb1fce975..e64c971038d 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6504,8 +6504,9 @@ void md_do_sync(mddev_t *mddev) skip: mddev->curr_resync = 0; mddev->curr_resync_completed = 0; - mddev->resync_min = 0; - mddev->resync_max = MaxSector; + if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) + /* We completed so max setting can be forgotten. */ + mddev->resync_max = MaxSector; sysfs_notify(&mddev->kobj, NULL, "sync_completed"); wake_up(&resync_wait); set_bit(MD_RECOVERY_DONE, &mddev->recovery); -- GitLab From 8dee7211467a56b7eb4e4359efb0aa4a72e1b6f3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 6 Nov 2009 14:59:29 +1100 Subject: [PATCH 0596/1165] md/raid5: make sure curr_sync_completes is uptodate when reshape starts This value is visible through sysfs and is used by mdadm when it manages a reshape (backing up data that is about to be rearranged). So it is important that it is always correct. Current it does not get updated properly when a reshape starts which can cause problems when assembling an array that is in the middle of being reshaped. This is suitable for 2.6.31.y stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/raid5.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 81abefc172d..dcce204b6c7 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4049,6 +4049,8 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped sector_nr = conf->reshape_progress; sector_div(sector_nr, new_data_disks); if (sector_nr) { + mddev->curr_resync_completed = sector_nr; + sysfs_notify(&mddev->kobj, NULL, "sync_completed"); *skipped = 1; return sector_nr; } -- GitLab From 662aeced1512e008e5613b91de8e8b8e01017cb5 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 30 Sep 2009 13:02:42 -0700 Subject: [PATCH 0597/1165] [ARM] properly report mv78100 stepping A1 Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-mv78xx0/common.c | 2 ++ arch/arm/mach-mv78xx0/include/mach/mv78xx0.h | 1 + 2 files changed, 3 insertions(+) diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 1b22e4af879..08465eb6a2c 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -845,6 +845,8 @@ static char * __init mv78xx0_id(void) } else if (dev == MV78100_DEV_ID) { if (rev == MV78100_REV_A0) return "MV78100-A0"; + else if (rev == MV78100_REV_A1) + return "MV78100-A1"; else return "MV78100-Rev-Unsupported"; } else if (dev == MV78200_DEV_ID) { diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index d715b92b090..788bdace130 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -112,6 +112,7 @@ #define MV78100_DEV_ID 0x7810 #define MV78100_REV_A0 1 +#define MV78100_REV_A1 2 #define MV78200_DEV_ID 0x7820 #define MV78200_REV_A0 1 -- GitLab From 5d8965557318fabb1680d1817c2afc2714b6d3ce Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Fri, 9 Oct 2009 08:26:45 +0200 Subject: [PATCH 0598/1165] [ARM] OpenRD base: Initialize PCI express and i2c Signed-off-by: Simon Kagstrom Acked-by: Dieter Kiermaier Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/openrd_base-setup.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/mach-kirkwood/openrd_base-setup.c b/arch/arm/mach-kirkwood/openrd_base-setup.c index 947dfb8cd5b..77617c72229 100644 --- a/arch/arm/mach-kirkwood/openrd_base-setup.c +++ b/arch/arm/mach-kirkwood/openrd_base-setup.c @@ -70,8 +70,20 @@ static void __init openrd_base_init(void) kirkwood_ge00_init(&openrd_base_ge00_data); kirkwood_sata_init(&openrd_base_sata_data); kirkwood_sdio_init(&openrd_base_mvsdio_data); + + kirkwood_i2c_init(); } +static int __init openrd_base_pci_init(void) +{ + if (machine_is_openrd_base()) + kirkwood_pcie_init(); + + return 0; + } +subsys_initcall(openrd_base_pci_init); + + MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board") /* Maintainer: Dhaval Vasa */ .phys_io = KIRKWOOD_REGS_PHYS_BASE, -- GitLab From 6de95c198729d34a85c88f8844f1c3d57fb6da00 Mon Sep 17 00:00:00 2001 From: Li Jie Date: Thu, 5 Nov 2009 07:29:54 -0800 Subject: [PATCH 0599/1165] [ARM] kirkwood: fix section mismatch kirkwood_timer_init() and kirkwood_pcie_setup() lack of __init which causes following warnings: WARNING: vmlinux.o(.text+0x9568): Section mismatch in reference from the function kirkwood_timer_init() to the function .init.text:kirkwood_find_tclk() The function kirkwood_timer_init() references the function __init kirkwood_find_tclk(). This is often because kirkwood_timer_init lacks a __init annotation or the annotation of kirkwood_find_tclk is wrong. WARNING: vmlinux.o(.text+0x979c): Section mismatch in reference from the function kirkwood_pcie_setup() to the function .init.text:orion_pcie_setup() The function kirkwood_pcie_setup() references the function __init orion_pcie_setup(). This is often because kirkwood_pcie_setup lacks a __init annotation or the annotation of orion_pcie_setup is wrong. Signed-off-by: lijie Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 2 +- arch/arm/mach-kirkwood/pcie.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 0acb61f3c10..7177c4aa634 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -845,7 +845,7 @@ int __init kirkwood_find_tclk(void) return 166666667; } -static void kirkwood_timer_init(void) +static void __init kirkwood_timer_init(void) { kirkwood_tclk = kirkwood_find_tclk(); orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk); diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index d90b9aae308..55388203300 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -93,7 +93,7 @@ static struct pci_ops pcie_ops = { }; -static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) +static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) { struct resource *res; extern unsigned int kirkwood_clk_ctrl; -- GitLab From 8a1cbf64977f89e9e9bc1d80dd01503337424f96 Mon Sep 17 00:00:00 2001 From: Gustavo Maciel Dias Vieira Date: Mon, 19 Oct 2009 09:41:53 -0200 Subject: [PATCH 0600/1165] ACPI: add DMI entry for SCI_EN resume quirk on HP dv4 Fixes the missing battery on sleep problem for yet another HP laptop ("HP Pavilion dv4"). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13449 Signed-off-by: Gustavo Maciel Dias Vieira Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index a90afcc723a..ed9760aa7aa 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -413,6 +413,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Pavilion dv4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { -- GitLab From 7433874e31f7f2e6e942b12012790565731d0f4a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 3 Nov 2009 00:53:02 +0100 Subject: [PATCH 0601/1165] drm/radeon/kms: add debugfs for power management for AtomBIOS devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/Makefile | 2 +- drivers/gpu/drm/radeon/r420.c | 2 + drivers/gpu/drm/radeon/r520.c | 2 + drivers/gpu/drm/radeon/r600.c | 3 ++ drivers/gpu/drm/radeon/radeon.h | 8 +++ drivers/gpu/drm/radeon/radeon_asic.h | 23 +++++++++ drivers/gpu/drm/radeon/radeon_atombios.c | 18 +++++++ drivers/gpu/drm/radeon/radeon_clocks.c | 2 +- drivers/gpu/drm/radeon/radeon_pm.c | 65 ++++++++++++++++++++++++ drivers/gpu/drm/radeon/rs600.c | 2 + drivers/gpu/drm/radeon/rs690.c | 2 + drivers/gpu/drm/radeon/rv515.c | 2 + drivers/gpu/drm/radeon/rv770.c | 3 ++ 13 files changed, 132 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/radeon/radeon_pm.c diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile index 09a28923f46..b5713eedd6e 100644 --- a/drivers/gpu/drm/radeon/Makefile +++ b/drivers/gpu/drm/radeon/Makefile @@ -49,7 +49,7 @@ radeon-y += radeon_device.o radeon_kms.o \ radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \ rs400.o rs600.o rs690.o rv515.o r520.o r600.o rv770.o radeon_test.o \ r200.o radeon_legacy_tv.o r600_cs.o r600_blit.o r600_blit_shaders.o \ - r600_blit_kms.o + r600_blit_kms.o radeon_pm.o radeon-$(CONFIG_COMPAT) += radeon_ioc32.o diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 5c7fe52de30..1cefdbcc085 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -311,6 +311,8 @@ int r420_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ r300_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index a555b7b19b4..f7435185c0a 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -260,6 +260,8 @@ int r520_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ r520_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 35360b09df3..8d6bc12192d 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1621,10 +1621,13 @@ int r600_init(struct radeon_device *rdev) r600_scratch_init(rdev); /* Initialize surface registers */ radeon_surface_init(rdev); + /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); r = radeon_clocks_init(rdev); if (r) return r; + /* Initialize power management */ + radeon_pm_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index ea3efd7ae85..9f0bd984788 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -139,6 +139,10 @@ struct radeon_clock { uint32_t default_sclk; }; +/* + * Power management + */ +int radeon_pm_init(struct radeon_device *rdev); /* * Fences. @@ -622,7 +626,9 @@ struct radeon_asic { uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence); + uint32_t (*get_engine_clock)(struct radeon_device *rdev); void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock); + uint32_t (*get_memory_clock)(struct radeon_device *rdev); void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock); void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes); void (*set_clock_gating)(struct radeon_device *rdev, int enable); @@ -953,7 +959,9 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v) #define radeon_copy_blit(rdev, s, d, np, f) (rdev)->asic->copy_blit((rdev), (s), (d), (np), (f)) #define radeon_copy_dma(rdev, s, d, np, f) (rdev)->asic->copy_dma((rdev), (s), (d), (np), (f)) #define radeon_copy(rdev, s, d, np, f) (rdev)->asic->copy((rdev), (s), (d), (np), (f)) +#define radeon_get_engine_clock(rdev) (rdev)->asic->get_engine_clock((rdev)) #define radeon_set_engine_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e)) +#define radeon_get_memory_clock(rdev) (rdev)->asic->get_memory_clock((rdev)) #define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e)) #define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l)) #define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e)) diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index d38f9963282..94991edc839 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -31,10 +31,13 @@ /* * common functions */ +uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev); void radeon_legacy_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable); +uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev); void radeon_atom_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); +uint32_t radeon_atom_get_memory_clock(struct radeon_device *rdev); void radeon_atom_set_memory_clock(struct radeon_device *rdev, uint32_t mem_clock); void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable); @@ -93,7 +96,9 @@ static struct radeon_asic r100_asic = { .copy_blit = &r100_copy_blit, .copy_dma = NULL, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -145,7 +150,9 @@ static struct radeon_asic r300_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -181,7 +188,9 @@ static struct radeon_asic r420_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -222,7 +231,9 @@ static struct radeon_asic rs400_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -267,7 +278,9 @@ static struct radeon_asic rs600_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -305,7 +318,9 @@ static struct radeon_asic rs690_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r300_copy_dma, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -349,7 +364,9 @@ static struct radeon_asic rv515_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -384,7 +401,9 @@ static struct radeon_asic r520_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -445,7 +464,9 @@ static struct radeon_asic r600_asic = { .copy_blit = &r600_copy_blit, .copy_dma = &r600_copy_blit, .copy = &r600_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -481,7 +502,9 @@ static struct radeon_asic rv770_asic = { .copy_blit = &r600_copy_blit, .copy_dma = &r600_copy_blit, .copy = &r600_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 80aacded85a..2ed88a82093 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1133,6 +1133,24 @@ void radeon_atom_static_pwrmgt_setup(struct radeon_device *rdev, int enable) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev) +{ + GET_ENGINE_CLOCK_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, GetEngineClock); + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + return args.ulReturnEngineClock; +} + +uint32_t radeon_atom_get_memory_clock(struct radeon_device *rdev) +{ + GET_MEMORY_CLOCK_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, GetMemoryClock); + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + return args.ulReturnMemoryClock; +} + void radeon_atom_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock) { diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index f5c32a766b1..a8135416762 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -32,7 +32,7 @@ #include "atom.h" /* 10 khz */ -static uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) +uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) { struct radeon_pll *spll = &rdev->clock.spll; uint32_t fb_div, ref_div, post_div, sclk; diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c new file mode 100644 index 00000000000..46146c6a2a0 --- /dev/null +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -0,0 +1,65 @@ +/* + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: RafaÅ‚ MiÅ‚ecki + */ +#include "drmP.h" +#include "radeon.h" + +int radeon_debugfs_pm_init(struct radeon_device *rdev); + +int radeon_pm_init(struct radeon_device *rdev) +{ + if (radeon_debugfs_pm_init(rdev)) { + DRM_ERROR("Failed to register debugfs file for CP !\n"); + } + + return 0; +} + +/* + * Debugfs info + */ +#if defined(CONFIG_DEBUG_FS) + +static int radeon_debugfs_pm_info(struct seq_file *m, void *data) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + struct radeon_device *rdev = dev->dev_private; + + seq_printf(m, "engine clock: %u0 Hz\n", radeon_get_engine_clock(rdev)); + seq_printf(m, "memory clock: %u0 Hz\n", radeon_get_memory_clock(rdev)); + + return 0; +} + +static struct drm_info_list radeon_pm_info_list[] = { + {"radeon_pm_info", radeon_debugfs_pm_info, 0, NULL}, +}; +#endif + +int radeon_debugfs_pm_init(struct radeon_device *rdev) +{ +#if defined(CONFIG_DEBUG_FS) + return radeon_debugfs_add_files(rdev, radeon_pm_info_list, ARRAY_SIZE(radeon_pm_info_list)); +#else + return 0; +#endif +} diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 942754c39be..5f117cd8736 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -488,6 +488,8 @@ int rs600_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rs600_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 025e3225346..27547175cf9 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -706,6 +706,8 @@ int rs690_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rs690_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 03c052d892c..7935f793bf6 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -587,6 +587,8 @@ int rv515_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rv515_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index ae074fdf804..b0efd0ddae7 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -983,10 +983,13 @@ int rv770_init(struct radeon_device *rdev) r600_scratch_init(rdev); /* Initialize surface registers */ radeon_surface_init(rdev); + /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); r = radeon_clocks_init(rdev); if (r) return r; + /* Initialize power management */ + radeon_pm_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); if (r) -- GitLab From 2839d396e3ae0891c1fdd87aa1cea218e6f5c4df Mon Sep 17 00:00:00 2001 From: Vaibhav Verma Date: Thu, 5 Nov 2009 23:13:36 -0500 Subject: [PATCH 0602/1165] ACPI: sleep: another HP/Compaq DMI entries for init_set_sci_en_on_resume http://bugzilla.kernel.org/show_bug.cgi?id=13745 Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index ed9760aa7aa..4cc1b8116e7 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -421,6 +421,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Pavilion dv7", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { -- GitLab From 4eb0c00b6221f28b8988df37c9cb1bc5a2b91b39 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 5 Nov 2009 20:24:33 -0800 Subject: [PATCH 0603/1165] sparc64: Add a comment about why we only use certain memory barriers these days. Based upon feedback from Mathieu Desnoyers. Signed-off-by: David S. Miller --- arch/sparc/include/asm/system_64.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h index 25e848f0cad..d47a98e6697 100644 --- a/arch/sparc/include/asm/system_64.h +++ b/arch/sparc/include/asm/system_64.h @@ -63,6 +63,10 @@ do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \ : : : "memory"); \ } while (0) +/* The kernel always executes in TSO memory model these days, + * and furthermore most sparc64 chips implement more stringent + * memory ordering than required by the specifications. + */ #define mb() membar_safe("#StoreLoad") #define rmb() __asm__ __volatile__("":::"memory") #define wmb() __asm__ __volatile__("":::"memory") -- GitLab From 1056bd51674e529813213186471bb4ac6689a755 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 5 Nov 2009 20:46:52 -0800 Subject: [PATCH 0604/1165] bridge: prevent bridging wrong device The bridge code assumes ethernet addressing, so be more strict in the what is allowed. This showed up when GRE had a bug and was not using correct address format. Add some more comments for increased clarity. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/bridge/br_if.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index b1b3b0fbf41..4a9f5273265 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -377,12 +377,16 @@ int br_add_if(struct net_bridge *br, struct net_device *dev) struct net_bridge_port *p; int err = 0; - if (dev->flags & IFF_LOOPBACK || dev->type != ARPHRD_ETHER) + /* Don't allow bridging non-ethernet like devices */ + if ((dev->flags & IFF_LOOPBACK) || + dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN) return -EINVAL; + /* No bridging of bridges */ if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) return -ELOOP; + /* Device is already being bridged */ if (dev->br_port != NULL) return -EBUSY; -- GitLab From b4ec824021493ba6cb7eeb61572f4d2f8a80a52e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 5 Nov 2009 20:56:07 -0800 Subject: [PATCH 0605/1165] rose: device refcount leak While hunting dev_put() for net-next-2.6, I found a device refcount leak in ROSE, ioctl(SIOCADDRT) error path. Fix is to not touch device refcount, as we hold RTNL Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/rose/rose_route.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c index 9478d9b3d97..f3e21989b88 100644 --- a/net/rose/rose_route.c +++ b/net/rose/rose_route.c @@ -578,18 +578,18 @@ static int rose_clear_routes(void) /* * Check that the device given is a valid AX.25 interface that is "up". + * called whith RTNL */ -static struct net_device *rose_ax25_dev_get(char *devname) +static struct net_device *rose_ax25_dev_find(char *devname) { struct net_device *dev; - if ((dev = dev_get_by_name(&init_net, devname)) == NULL) + if ((dev = __dev_get_by_name(&init_net, devname)) == NULL) return NULL; if ((dev->flags & IFF_UP) && dev->type == ARPHRD_AX25) return dev; - dev_put(dev); return NULL; } @@ -720,27 +720,23 @@ int rose_rt_ioctl(unsigned int cmd, void __user *arg) case SIOCADDRT: if (copy_from_user(&rose_route, arg, sizeof(struct rose_route_struct))) return -EFAULT; - if ((dev = rose_ax25_dev_get(rose_route.device)) == NULL) + if ((dev = rose_ax25_dev_find(rose_route.device)) == NULL) return -EINVAL; - if (rose_dev_exists(&rose_route.address)) { /* Can't add routes to ourself */ - dev_put(dev); + if (rose_dev_exists(&rose_route.address)) /* Can't add routes to ourself */ return -EINVAL; - } if (rose_route.mask > 10) /* Mask can't be more than 10 digits */ return -EINVAL; if (rose_route.ndigis > AX25_MAX_DIGIS) return -EINVAL; err = rose_add_node(&rose_route, dev); - dev_put(dev); return err; case SIOCDELRT: if (copy_from_user(&rose_route, arg, sizeof(struct rose_route_struct))) return -EFAULT; - if ((dev = rose_ax25_dev_get(rose_route.device)) == NULL) + if ((dev = rose_ax25_dev_find(rose_route.device)) == NULL) return -EINVAL; err = rose_del_node(&rose_route, dev); - dev_put(dev); return err; case SIOCRSCLRRT: -- GitLab From 345e5a7672f561b539b3249cbe437b8d6595ab1b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 5 Nov 2009 14:34:57 +0000 Subject: [PATCH 0606/1165] serial: sh-sci: disable callback typo fix Avoid invoking the disable callback in case of NULL. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- drivers/serial/sh-sci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 85119fb7cb5..6498bd1fb6d 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1143,7 +1143,7 @@ static void serial_console_write(struct console *co, const char *s, while ((sci_in(port, SCxSR) & bits) != bits) cpu_relax(); - if (sci_port->disable); + if (sci_port->disable) sci_port->disable(port); } -- GitLab From 421b541110b20ccff1a7ff3245439cb24efe9812 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 6 Nov 2009 17:23:33 +0900 Subject: [PATCH 0607/1165] sh: unwinder: Fix up invalid PC refetch in dwarf unwinder. The dwarf unwinder presently attempts to provide a sane PC value if none is provided, however the logic is broken and cases where a previous valid dwarf frame exists along with a bogus PC value can still proceed. This fixes up the test and prevents the unwinder from blowing up. Signed-off-by: Paul Mundt --- arch/sh/kernel/dwarf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c index 2d07084e488..d76a23170db 100644 --- a/arch/sh/kernel/dwarf.c +++ b/arch/sh/kernel/dwarf.c @@ -555,7 +555,7 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc, * NOTE: the return address is guaranteed to be setup by the * time this function makes its first function call. */ - if (!pc && !prev) + if (!pc || !prev) pc = (unsigned long)current_text_addr(); #ifdef CONFIG_FUNCTION_GRAPH_TRACER -- GitLab From f5209b4446d185cc95f46363f8043a743530c15a Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Fri, 6 Nov 2009 00:31:01 -0800 Subject: [PATCH 0608/1165] be2net: Fix CQE_STATUS_EXTD_SHIFT define Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 49953787e41..e5f9676cf1b 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -68,7 +68,7 @@ enum { #define CQE_STATUS_COMPL_MASK 0xFFFF #define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */ #define CQE_STATUS_EXTD_MASK 0xFFFF -#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */ +#define CQE_STATUS_EXTD_SHIFT 16 /* bits 16 - 31 */ struct be_mcc_compl { u32 status; /* dword 0 */ -- GitLab From f9dd09c7f7199685601d75882447a6598be8a3e0 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Fri, 6 Nov 2009 00:43:42 -0800 Subject: [PATCH 0609/1165] netfilter: nf_nat: fix NAT issue in 2.6.30.4+ Vitezslav Samel discovered that since 2.6.30.4+ active FTP can not work over NAT. The "cause" of the problem was a fix of unacknowledged data detection with NAT (commit a3a9f79e361e864f0e9d75ebe2a0cb43d17c4272). However, actually, that fix uncovered a long standing bug in TCP conntrack: when NAT was enabled, we simply updated the max of the right edge of the segments we have seen (td_end), by the offset NAT produced with changing IP/port in the data. However, we did not update the other parameter (td_maxend) which is affected by the NAT offset. Thus that could drift away from the correct value and thus resulted breaking active FTP. The patch below fixes the issue by *not* updating the conntrack parameters from NAT, but instead taking into account the NAT offsets in conntrack in a consistent way. (Updating from NAT would be more harder and expensive because it'd need to re-calculate parameters we already calculated in conntrack.) Signed-off-by: Jozsef Kadlecsik Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/net/netfilter/nf_conntrack.h | 8 ++-- include/net/netfilter/nf_nat_helper.h | 4 ++ net/ipv4/netfilter/nf_nat_core.c | 3 ++ net/ipv4/netfilter/nf_nat_helper.c | 34 +++++++++----- net/netfilter/nf_conntrack_core.c | 8 ++++ net/netfilter/nf_conntrack_proto_tcp.c | 64 +++++++++++--------------- 6 files changed, 67 insertions(+), 54 deletions(-) diff --git a/include/net/netfilter/nf_conntrack.h b/include/net/netfilter/nf_conntrack.h index cbdd6284996..5cf7270e3ff 100644 --- a/include/net/netfilter/nf_conntrack.h +++ b/include/net/netfilter/nf_conntrack.h @@ -255,11 +255,9 @@ static inline bool nf_ct_kill(struct nf_conn *ct) } /* These are for NAT. Icky. */ -/* Update TCP window tracking data when NAT mangles the packet */ -extern void nf_conntrack_tcp_update(const struct sk_buff *skb, - unsigned int dataoff, - struct nf_conn *ct, int dir, - s16 offset); +extern s16 (*nf_ct_nat_offset)(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq); /* Fake conntrack entry for untracked connections */ extern struct nf_conn nf_conntrack_untracked; diff --git a/include/net/netfilter/nf_nat_helper.h b/include/net/netfilter/nf_nat_helper.h index 237a961f40e..4222220920a 100644 --- a/include/net/netfilter/nf_nat_helper.h +++ b/include/net/netfilter/nf_nat_helper.h @@ -32,4 +32,8 @@ extern int (*nf_nat_seq_adjust_hook)(struct sk_buff *skb, * to port ct->master->saved_proto. */ extern void nf_nat_follow_master(struct nf_conn *ct, struct nf_conntrack_expect *this); + +extern s16 nf_nat_get_offset(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq); #endif diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c index 68afc6ecd34..fe1a64479dd 100644 --- a/net/ipv4/netfilter/nf_nat_core.c +++ b/net/ipv4/netfilter/nf_nat_core.c @@ -750,6 +750,8 @@ static int __init nf_nat_init(void) BUG_ON(nfnetlink_parse_nat_setup_hook != NULL); rcu_assign_pointer(nfnetlink_parse_nat_setup_hook, nfnetlink_parse_nat_setup); + BUG_ON(nf_ct_nat_offset != NULL); + rcu_assign_pointer(nf_ct_nat_offset, nf_nat_get_offset); return 0; cleanup_extend: @@ -764,6 +766,7 @@ static void __exit nf_nat_cleanup(void) nf_ct_extend_unregister(&nat_extend); rcu_assign_pointer(nf_nat_seq_adjust_hook, NULL); rcu_assign_pointer(nfnetlink_parse_nat_setup_hook, NULL); + rcu_assign_pointer(nf_ct_nat_offset, NULL); synchronize_net(); } diff --git a/net/ipv4/netfilter/nf_nat_helper.c b/net/ipv4/netfilter/nf_nat_helper.c index 09172a65d9b..f9520fa3aba 100644 --- a/net/ipv4/netfilter/nf_nat_helper.c +++ b/net/ipv4/netfilter/nf_nat_helper.c @@ -73,6 +73,28 @@ adjust_tcp_sequence(u32 seq, DUMP_OFFSET(this_way); } +/* Get the offset value, for conntrack */ +s16 nf_nat_get_offset(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq) +{ + struct nf_conn_nat *nat = nfct_nat(ct); + struct nf_nat_seq *this_way; + s16 offset; + + if (!nat) + return 0; + + this_way = &nat->seq[dir]; + spin_lock_bh(&nf_nat_seqofs_lock); + offset = after(seq, this_way->correction_pos) + ? this_way->offset_after : this_way->offset_before; + spin_unlock_bh(&nf_nat_seqofs_lock); + + return offset; +} +EXPORT_SYMBOL_GPL(nf_nat_get_offset); + /* Frobs data inside this packet, which is linear. */ static void mangle_contents(struct sk_buff *skb, unsigned int dataoff, @@ -189,11 +211,6 @@ nf_nat_mangle_tcp_packet(struct sk_buff *skb, adjust_tcp_sequence(ntohl(tcph->seq), (int)rep_len - (int)match_len, ct, ctinfo); - /* Tell TCP window tracking about seq change */ - nf_conntrack_tcp_update(skb, ip_hdrlen(skb), - ct, CTINFO2DIR(ctinfo), - (int)rep_len - (int)match_len); - nf_conntrack_event_cache(IPCT_NATSEQADJ, ct); } return 1; @@ -415,12 +432,7 @@ nf_nat_seq_adjust(struct sk_buff *skb, tcph->seq = newseq; tcph->ack_seq = newack; - if (!nf_nat_sack_adjust(skb, tcph, ct, ctinfo)) - return 0; - - nf_conntrack_tcp_update(skb, ip_hdrlen(skb), ct, dir, seqoff); - - return 1; + return nf_nat_sack_adjust(skb, tcph, ct, ctinfo); } /* Setup NAT on this expected conntrack so it follows master. */ diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 7c9ec3dee96..0cdfb388a19 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -1350,6 +1350,11 @@ err_stat: return ret; } +s16 (*nf_ct_nat_offset)(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq); +EXPORT_SYMBOL_GPL(nf_ct_nat_offset); + int nf_conntrack_init(struct net *net) { int ret; @@ -1367,6 +1372,9 @@ int nf_conntrack_init(struct net *net) /* For use by REJECT target */ rcu_assign_pointer(ip_ct_attach, nf_conntrack_attach); rcu_assign_pointer(nf_ct_destroy, destroy_conntrack); + + /* Howto get NAT offsets */ + rcu_assign_pointer(nf_ct_nat_offset, NULL); } return 0; diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 97a82ba7537..ba2b7693728 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -492,6 +492,21 @@ static void tcp_sack(const struct sk_buff *skb, unsigned int dataoff, } } +#ifdef CONFIG_NF_NAT_NEEDED +static inline s16 nat_offset(const struct nf_conn *ct, + enum ip_conntrack_dir dir, + u32 seq) +{ + typeof(nf_ct_nat_offset) get_offset = rcu_dereference(nf_ct_nat_offset); + + return get_offset != NULL ? get_offset(ct, dir, seq) : 0; +} +#define NAT_OFFSET(pf, ct, dir, seq) \ + (pf == NFPROTO_IPV4 ? nat_offset(ct, dir, seq) : 0) +#else +#define NAT_OFFSET(pf, ct, dir, seq) 0 +#endif + static bool tcp_in_window(const struct nf_conn *ct, struct ip_ct_tcp *state, enum ip_conntrack_dir dir, @@ -506,6 +521,7 @@ static bool tcp_in_window(const struct nf_conn *ct, struct ip_ct_tcp_state *receiver = &state->seen[!dir]; const struct nf_conntrack_tuple *tuple = &ct->tuplehash[dir].tuple; __u32 seq, ack, sack, end, win, swin; + s16 receiver_offset; bool res; /* @@ -519,11 +535,16 @@ static bool tcp_in_window(const struct nf_conn *ct, if (receiver->flags & IP_CT_TCP_FLAG_SACK_PERM) tcp_sack(skb, dataoff, tcph, &sack); + /* Take into account NAT sequence number mangling */ + receiver_offset = NAT_OFFSET(pf, ct, !dir, ack - 1); + ack -= receiver_offset; + sack -= receiver_offset; + pr_debug("tcp_in_window: START\n"); pr_debug("tcp_in_window: "); nf_ct_dump_tuple(tuple); - pr_debug("seq=%u ack=%u sack=%u win=%u end=%u\n", - seq, ack, sack, win, end); + pr_debug("seq=%u ack=%u+(%d) sack=%u+(%d) win=%u end=%u\n", + seq, ack, receiver_offset, sack, receiver_offset, win, end); pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i " "receiver end=%u maxend=%u maxwin=%u scale=%i\n", sender->td_end, sender->td_maxend, sender->td_maxwin, @@ -613,8 +634,8 @@ static bool tcp_in_window(const struct nf_conn *ct, pr_debug("tcp_in_window: "); nf_ct_dump_tuple(tuple); - pr_debug("seq=%u ack=%u sack =%u win=%u end=%u\n", - seq, ack, sack, win, end); + pr_debug("seq=%u ack=%u+(%d) sack=%u+(%d) win=%u end=%u\n", + seq, ack, receiver_offset, sack, receiver_offset, win, end); pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i " "receiver end=%u maxend=%u maxwin=%u scale=%i\n", sender->td_end, sender->td_maxend, sender->td_maxwin, @@ -700,7 +721,7 @@ static bool tcp_in_window(const struct nf_conn *ct, before(seq, sender->td_maxend + 1) ? after(end, sender->td_end - receiver->td_maxwin - 1) ? before(sack, receiver->td_end + 1) ? - after(ack, receiver->td_end - MAXACKWINDOW(sender)) ? "BUG" + after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1) ? "BUG" : "ACK is under the lower bound (possible overly delayed ACK)" : "ACK is over the upper bound (ACKed data not seen yet)" : "SEQ is under the lower bound (already ACKed data retransmitted)" @@ -715,39 +736,6 @@ static bool tcp_in_window(const struct nf_conn *ct, return res; } -#ifdef CONFIG_NF_NAT_NEEDED -/* Update sender->td_end after NAT successfully mangled the packet */ -/* Caller must linearize skb at tcp header. */ -void nf_conntrack_tcp_update(const struct sk_buff *skb, - unsigned int dataoff, - struct nf_conn *ct, int dir, - s16 offset) -{ - const struct tcphdr *tcph = (const void *)skb->data + dataoff; - const struct ip_ct_tcp_state *sender = &ct->proto.tcp.seen[dir]; - const struct ip_ct_tcp_state *receiver = &ct->proto.tcp.seen[!dir]; - __u32 end; - - end = segment_seq_plus_len(ntohl(tcph->seq), skb->len, dataoff, tcph); - - spin_lock_bh(&ct->lock); - /* - * We have to worry for the ack in the reply packet only... - */ - if (ct->proto.tcp.seen[dir].td_end + offset == end) - ct->proto.tcp.seen[dir].td_end = end; - ct->proto.tcp.last_end = end; - spin_unlock_bh(&ct->lock); - pr_debug("tcp_update: sender end=%u maxend=%u maxwin=%u scale=%i " - "receiver end=%u maxend=%u maxwin=%u scale=%i\n", - sender->td_end, sender->td_maxend, sender->td_maxwin, - sender->td_scale, - receiver->td_end, receiver->td_maxend, receiver->td_maxwin, - receiver->td_scale); -} -EXPORT_SYMBOL_GPL(nf_conntrack_tcp_update); -#endif - #define TH_FIN 0x01 #define TH_SYN 0x02 #define TH_RST 0x04 -- GitLab From 887e671f324d9898aaedb29a6ece6c853c394067 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 6 Nov 2009 00:50:39 -0800 Subject: [PATCH 0610/1165] decnet: netdevice refcount leak While working on device refcount stuff, I found a device refcount leak through DECNET. This nasty bug can be used to hold refcounts on any !DECNET netdevice. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/decnet/sysctl_net_decnet.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/decnet/sysctl_net_decnet.c b/net/decnet/sysctl_net_decnet.c index 26b0ab1e9f5..2036568beea 100644 --- a/net/decnet/sysctl_net_decnet.c +++ b/net/decnet/sysctl_net_decnet.c @@ -263,11 +263,10 @@ static int dn_def_dev_strategy(ctl_table *table, return -ENODEV; rv = -ENODEV; - if (dev->dn_ptr != NULL) { + if (dev->dn_ptr != NULL) rv = dn_dev_set_default(dev, 1); - if (rv) - dev_put(dev); - } + if (rv) + dev_put(dev); } return rv; -- GitLab From ba230c3f6dc88ec008806adb27b12088486d508e Mon Sep 17 00:00:00 2001 From: Mingming Date: Fri, 6 Nov 2009 04:01:23 -0500 Subject: [PATCH 0611/1165] ext4: Fix return value of ext4_split_unwritten_extents() to fix direct I/O To prepare for a direct I/O write, we need to split the unwritten extents before submitting the I/O. When no extents needed to be split, ext4_split_unwritten_extents() was incorrectly returning 0 instead of the size of uninitialized extents. This bug caused the wrong return value sent back to VFS code when it gets called from async IO path, leading to an unnecessary fall back to buffered IO. This bug also hid the fact that the check to see whether or not a split would be necessary was incorrect; we can only skip splitting the extent if the write completely covers the uninitialized extent. Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index e991ae2b461..715264b4bae 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2807,6 +2807,8 @@ fix_extent_len: * into three uninitialized extent(at most). After IO complete, the part * being filled will be convert to initialized by the end_io callback function * via ext4_convert_unwritten_extents(). + * + * Returns the size of uninitialized extent to be written on success. */ static int ext4_split_unwritten_extents(handle_t *handle, struct inode *inode, @@ -2824,7 +2826,6 @@ static int ext4_split_unwritten_extents(handle_t *handle, unsigned int allocated, ee_len, depth; ext4_fsblk_t newblock; int err = 0; - int ret = 0; ext_debug("ext4_split_unwritten_extents: inode %lu," "iblock %llu, max_blocks %u\n", inode->i_ino, @@ -2842,12 +2843,12 @@ static int ext4_split_unwritten_extents(handle_t *handle, ext4_ext_store_pblock(&orig_ex, ext_pblock(ex)); /* - * if the entire unintialized extent length less than - * the size of extent to write, there is no need to split - * uninitialized extent + * If the uninitialized extent begins at the same logical + * block where the write begins, and the write completely + * covers the extent, then we don't need to split it. */ - if (allocated <= max_blocks) - return ret; + if ((iblock == ee_block) && (allocated <= max_blocks)) + return allocated; err = ext4_ext_get_access(handle, inode, path + depth); if (err) -- GitLab From 4d187fb830a7aa8afb471124abe41b04caf49401 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 21 Oct 2009 23:10:03 +0200 Subject: [PATCH 0612/1165] ASoC: OMAP: Don't try to set unsupported OMAP_DMA_DATA_BURST_16 on OMAP1 After DMA burst mode has been introduced in sound/soc/omap/omap-pcm.c, omap_pcm_prepare() unconditionally calls: omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); Current implementation of those two functions found in arch/arm/plat-ompa/dma.c doesn't support OMAP_DMA_DATA_BURST_16 on OMAP1 at all, so they both end with BUG() on that machine. That results in ASoC being completely unusable, at least on my OMAP5910 based Amstrad Delta. The patch corrects the problem by not calling those two functions when run on OMAP1 class based machines. Created against linux-2.6.32-rc5. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik Acked-by: Jarkko Nikula Signed-off-by: Mark Brown --- sound/soc/omap/omap-pcm.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/omap/omap-pcm.c b/sound/soc/omap/omap-pcm.c index 5735945788b..6a829eef2a4 100644 --- a/sound/soc/omap/omap-pcm.c +++ b/sound/soc/omap/omap-pcm.c @@ -195,8 +195,12 @@ static int omap_pcm_prepare(struct snd_pcm_substream *substream) else omap_enable_dma_irq(prtd->dma_ch, OMAP_DMA_FRAME_IRQ); - omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); - omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16); + if (!(cpu_class_is_omap1())) { + omap_set_dma_src_burst_mode(prtd->dma_ch, + OMAP_DMA_DATA_BURST_16); + omap_set_dma_dest_burst_mode(prtd->dma_ch, + OMAP_DMA_DATA_BURST_16); + } return 0; } -- GitLab From 6fc786d5034ed7ce2d43c459211137de6d99dd28 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Fri, 6 Nov 2009 18:00:24 +0900 Subject: [PATCH 0613/1165] ASoC: S3C64XX I2S: Enable audio-bus clock Added the missing clk_enable after acquiring the 'audio-bus' clock. Signed-off-by: Jassi Brar Signed-off-by: Mark Brown --- sound/soc/s3c24xx/s3c64xx-i2s.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/s3c24xx/s3c64xx-i2s.c b/sound/soc/s3c24xx/s3c64xx-i2s.c index 3c06c401d0f..105a77eeded 100644 --- a/sound/soc/s3c24xx/s3c64xx-i2s.c +++ b/sound/soc/s3c24xx/s3c64xx-i2s.c @@ -220,6 +220,8 @@ static __devinit int s3c64xx_iis_dev_probe(struct platform_device *pdev) goto err; } + clk_enable(i2s->iis_cclk); + ret = s3c_i2sv2_probe(pdev, dai, i2s, 0); if (ret) goto err_clk; -- GitLab From 61ec33eb7d8e1e94a93a8243238dc5f9a183001a Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 19 Oct 2009 10:53:36 -0500 Subject: [PATCH 0614/1165] [SCSI] scsi_transport_fc: Fix WARN message for FC passthru failure paths There are three error paths in the FC passthru code where job->reply->reply_payload_rcv_len does not get initialized, resulting in the WARN_ON in fc_bsg_jobdone going off. This patch fixes this. An example of one of the WARN_ON messages seen: Badness at drivers/scsi/scsi_transport_fc.c:3424 NIP: d000000000bf21ac LR: d000000000bf2684 CTR: c0000000003f753c REGS: c00000004eb03430 TRAP: 0700 Not tainted (2.6.32-rc4-git) MSR: 8000000000029032 CR: 24008444 XER: 00000012 TASK = c00000004c3fc9c0[3243] 'fcping' THREAD: c00000004eb00000 CPU: 0 GPR00: 0000000000000001 c00000004eb036b0 d000000000c01da0 000000004bf17fc0 GPR04: c00000004cd256a0 c00000007e011ce0 c00000007e011d00 c00000004e718000 GPR08: c00000004cd256a0 c00000004eb03ad0 c00000004cd25a90 0000000000000020 GPR12: d000000000bf7848 c000000000b62600 0000000000000060 fffffffffffffff4 GPR16: ffffffffffffffd6 c00000004c7a3060 ffffffff80000003 c00000004b0f0310 GPR20: c00000004e71b180 c00000004c7a3060 0000000000000004 0000000000000000 GPR24: c00000004e71b000 c00000004c7a3000 c00000004b0f0000 c00000004e718000 GPR28: c00000004cd256a0 c00000004cd25a90 d000000000c01db0 c00000004e01d680 NIP [d000000000bf21ac] .fc_bsg_jobdone+0x64/0x9c [scsi_transport_fc] LR [d000000000bf2684] .fc_bsg_request_handler+0x4a0/0x564 [scsi_transport_fc] Call Trace: [c00000004eb036b0] [c0000000003f755c] .get_device+0x20/0x38 (unreliable) [c00000004eb03720] [d000000000bf2684] .fc_bsg_request_handler+0x4a0/0x564 [scsi_transport_fc] [c00000004eb03820] [c0000000002c9b5c] .__generic_unplug_device+0x58/0x70 [c00000004eb038a0] [c0000000002ce9fc] .blk_execute_rq_nowait+0x70/0xf4 [c00000004eb03930] [c0000000002ceb2c] .blk_execute_rq+0xac/0x100 [c00000004eb03a60] [c0000000002d51b4] .bsg_ioctl+0x1fc/0x264 [c00000004eb03c10] [c00000000018a89c] .vfs_ioctl+0x54/0xec [c00000004eb03ca0] [c00000000018b01c] .do_vfs_ioctl+0x640/0x6a8 [c00000004eb03d80] [c00000000018b0fc] .SyS_ioctl+0x78/0xbc [c00000004eb03e30] [c0000000000085b4] syscall_exit+0x0/0x40 Instruction dump: 8003004c 2fa80000 90090104 38000000 900a0108 419e0038 e9230040 81680108 80690004 7f835840 7c101026 5400f7fe <0b000000> 7d605b78 7f8b1840 409d0008 Signed-off-by: Brian King Acked-By: James Smart Signed-off-by: James Bottomley --- drivers/scsi/scsi_transport_fc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index a67fed10598..c6f70dae9b2 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -3656,6 +3656,7 @@ fc_bsg_host_dispatch(struct request_queue *q, struct Scsi_Host *shost, fail_host_msg: /* return the errno failure code as the only status */ BUG_ON(job->reply_len < sizeof(uint32_t)); + job->reply->reply_payload_rcv_len = 0; job->reply->result = ret; job->reply_len = sizeof(uint32_t); fc_bsg_jobdone(job); @@ -3741,6 +3742,7 @@ check_bidi: fail_rport_msg: /* return the errno failure code as the only status */ BUG_ON(job->reply_len < sizeof(uint32_t)); + job->reply->reply_payload_rcv_len = 0; job->reply->result = ret; job->reply_len = sizeof(uint32_t); fc_bsg_jobdone(job); @@ -3797,6 +3799,7 @@ fc_bsg_request_handler(struct request_queue *q, struct Scsi_Host *shost, /* check if we have the msgcode value at least */ if (job->request_len < sizeof(uint32_t)) { BUG_ON(job->reply_len < sizeof(uint32_t)); + job->reply->reply_payload_rcv_len = 0; job->reply->result = -ENOMSG; job->reply_len = sizeof(uint32_t); fc_bsg_jobdone(job); -- GitLab From 3feeb89d40cc0ab3777f12571509b23da466105c Mon Sep 17 00:00:00 2001 From: Wayne Boyer Date: Tue, 20 Oct 2009 11:09:00 -0700 Subject: [PATCH 0615/1165] [SCSI] ipr: add workaround for MSI interrupts on P7 This patch adds some additional logic to the interrupt service routine to fix a potential problem where an MSI interrupt does not get cleared the first time. Signed-off-by: Wayne Boyer Acked-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 42 +++++++++++++++++++++++++++++++++--------- drivers/scsi/ipr.h | 1 + 2 files changed, 34 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 5f045505a1f..76d294fc784 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -4188,6 +4188,25 @@ static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg, return rc; } +/** + * ipr_isr_eh - Interrupt service routine error handler + * @ioa_cfg: ioa config struct + * @msg: message to log + * + * Return value: + * none + **/ +static void ipr_isr_eh(struct ipr_ioa_cfg *ioa_cfg, char *msg) +{ + ioa_cfg->errors_logged++; + dev_err(&ioa_cfg->pdev->dev, "%s\n", msg); + + if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) + ioa_cfg->sdt_state = GET_DUMP; + + ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); +} + /** * ipr_isr - Interrupt service routine * @irq: irq number @@ -4203,6 +4222,7 @@ static irqreturn_t ipr_isr(int irq, void *devp) volatile u32 int_reg, int_mask_reg; u32 ioasc; u16 cmd_index; + int num_hrrq = 0; struct ipr_cmnd *ipr_cmd; irqreturn_t rc = IRQ_NONE; @@ -4233,13 +4253,7 @@ static irqreturn_t ipr_isr(int irq, void *devp) IPR_HRRQ_REQ_RESP_HANDLE_MASK) >> IPR_HRRQ_REQ_RESP_HANDLE_SHIFT; if (unlikely(cmd_index >= IPR_NUM_CMD_BLKS)) { - ioa_cfg->errors_logged++; - dev_err(&ioa_cfg->pdev->dev, "Invalid response handle from IOA\n"); - - if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) - ioa_cfg->sdt_state = GET_DUMP; - - ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); + ipr_isr_eh(ioa_cfg, "Invalid response handle from IOA"); spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); return IRQ_HANDLED; } @@ -4266,8 +4280,18 @@ static irqreturn_t ipr_isr(int irq, void *devp) if (ipr_cmd != NULL) { /* Clear the PCI interrupt */ - writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg); - int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg; + do { + writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg); + int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg; + } while (int_reg & IPR_PCII_HRRQ_UPDATED && + num_hrrq++ < IPR_MAX_HRRQ_RETRIES); + + if (int_reg & IPR_PCII_HRRQ_UPDATED) { + ipr_isr_eh(ioa_cfg, "Error clearing HRRQ"); + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + return IRQ_HANDLED; + } + } else break; } diff --git a/drivers/scsi/ipr.h b/drivers/scsi/ipr.h index 163245a1c3e..19bbcf39f0c 100644 --- a/drivers/scsi/ipr.h +++ b/drivers/scsi/ipr.h @@ -144,6 +144,7 @@ #define IPR_IOA_MAX_SECTORS 32767 #define IPR_VSET_MAX_SECTORS 512 #define IPR_MAX_CDB_LEN 16 +#define IPR_MAX_HRRQ_RETRIES 3 #define IPR_DEFAULT_BUS_WIDTH 16 #define IPR_80MBs_SCSI_RATE ((80 * 10) / (IPR_DEFAULT_BUS_WIDTH / 8)) -- GitLab From 88197966e1eeee6547764fa49bfce7e57549acd2 Mon Sep 17 00:00:00 2001 From: Anil Ravindranath Date: Thu, 24 Sep 2009 16:27:42 -0700 Subject: [PATCH 0616/1165] [SCSI] pmcraid: Fix ppc64 driver build for using cpu_to_le32 on U8 data type Fix a reported ppc64 driver build issue. Removed cpu_to_le32 conversion usage for flags in struct pmcraid_ioadl_desc. This was breaking the driver build in ppc64. drivers/scsi/pmcraid.c: In function 'pmcraid_request_sense': drivers/scsi/pmcraid.c:2254: warning: large integer implicitly truncated to unsigned type Signed-off-by: Anil Ravindranath Signed-off-by: James Bottomley --- drivers/scsi/pmcraid.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index f7c70e2a822..0a97bc9074b 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -1071,7 +1071,7 @@ static struct pmcraid_cmd *pmcraid_init_hcam ioarcb->data_transfer_length = cpu_to_le32(rcb_size); - ioadl[0].flags |= cpu_to_le32(IOADL_FLAGS_READ_LAST); + ioadl[0].flags |= IOADL_FLAGS_READ_LAST; ioadl[0].data_len = cpu_to_le32(rcb_size); ioadl[0].address = cpu_to_le32(dma); @@ -2251,7 +2251,7 @@ static void pmcraid_request_sense(struct pmcraid_cmd *cmd) ioadl->address = cpu_to_le64(cmd->sense_buffer_dma); ioadl->data_len = cpu_to_le32(SCSI_SENSE_BUFFERSIZE); - ioadl->flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC); + ioadl->flags = IOADL_FLAGS_LAST_DESC; /* request sense might be called as part of error response processing * which runs in tasklets context. It is possible that mid-layer might @@ -3017,7 +3017,7 @@ static int pmcraid_build_ioadl( ioadl[i].flags = 0; } /* setup last descriptor */ - ioadl[i - 1].flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC); + ioadl[i - 1].flags = IOADL_FLAGS_LAST_DESC; return 0; } @@ -3387,7 +3387,7 @@ static int pmcraid_build_passthrough_ioadls( } /* setup the last descriptor */ - ioadl[i - 1].flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC); + ioadl[i - 1].flags = IOADL_FLAGS_LAST_DESC; return 0; } @@ -5314,7 +5314,7 @@ static void pmcraid_querycfg(struct pmcraid_cmd *cmd) cpu_to_le32(sizeof(struct pmcraid_config_table)); ioadl = &(ioarcb->add_data.u.ioadl[0]); - ioadl->flags = cpu_to_le32(IOADL_FLAGS_LAST_DESC); + ioadl->flags = IOADL_FLAGS_LAST_DESC; ioadl->address = cpu_to_le64(pinstance->cfg_table_bus_addr); ioadl->data_len = cpu_to_le32(sizeof(struct pmcraid_config_table)); -- GitLab From b2b465e9280b739a528435d2916c0a5c1b4eb100 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Thu, 29 Oct 2009 22:32:26 -0400 Subject: [PATCH 0617/1165] [SCSI] Fix incorrect reporting of host protection capabilities The advent of DIF Type 2 devices exposed some missing break statements in the protection mask switch constructs. However, rewriting the code to use an index into a small static array seemed like a more elegant solution. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- include/scsi/scsi_host.h | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 6e728b17690..47941fc5aba 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -797,30 +797,23 @@ static inline unsigned int scsi_host_get_prot(struct Scsi_Host *shost) static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type) { - switch (target_type) { - case 1: - if (shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION) - return target_type; - case 2: - if (shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION) - return target_type; - case 3: - if (shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION) - return target_type; - } + static unsigned char cap[] = { 0, + SHOST_DIF_TYPE1_PROTECTION, + SHOST_DIF_TYPE2_PROTECTION, + SHOST_DIF_TYPE3_PROTECTION }; - return 0; + return shost->prot_capabilities & cap[target_type] ? target_type : 0; } static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type) { #if defined(CONFIG_BLK_DEV_INTEGRITY) - switch (target_type) { - case 0: return shost->prot_capabilities & SHOST_DIX_TYPE0_PROTECTION; - case 1: return shost->prot_capabilities & SHOST_DIX_TYPE1_PROTECTION; - case 2: return shost->prot_capabilities & SHOST_DIX_TYPE2_PROTECTION; - case 3: return shost->prot_capabilities & SHOST_DIX_TYPE3_PROTECTION; - } + static unsigned char cap[] = { SHOST_DIX_TYPE0_PROTECTION, + SHOST_DIX_TYPE1_PROTECTION, + SHOST_DIX_TYPE2_PROTECTION, + SHOST_DIX_TYPE3_PROTECTION }; + + return shost->prot_capabilities & cap[target_type]; #endif return 0; } -- GitLab From 143d40f3ab8fbd8ca2fe712ec8e072d687142804 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 6 Nov 2009 12:58:20 -0500 Subject: [PATCH 0618/1165] Revert "ipw2200: fix oops on missing firmware" This reverts commit e6c5fc53d0f44a772398402ee8a1879818e42b4e. Based on this regression report: Date: Thu, 05 Nov 2009 15:59:16 +0100 From: Holger Schurig To: linux-wireless@vger.kernel.org Subject: BUG: oops when "rmmod ipw2200" This happened on wireless-testing v2.6.32-rc6-41575-g5e68bfb. I modprobed ipw2200, put it into monitor mode, used tshark a while to monitor, then I stopped tshark, "ifconfig eth2 down" and finally "rmmod ipw2200", and voila: [ 917.189620] ------------[ cut here ]------------ [ 917.189717] kernel BUG at net/wireless/core.c:543! [ 917.189805] invalid opcode: 0000 [#1] PREEMPT SMP [ 917.190002] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0/firmware/0000:02:0d.0/loading [ 917.190136] Modules linked in: lib80211_crypt_wep ipw2200(-) libipw lib80211 ath5k mac80211 ath cfg80211 psmouse uhci_hcd [ 917.190680] [ 917.190759] Pid: 1763, comm: rmmod Not tainted (2.6.32-rc6-wl #26) Amilo M1425 [ 917.190886] EIP: 0060:[] EFLAGS: 00010202 CPU: 0 [ 917.190992] EIP is at wiphy_unregister+0xd3/0x175 [cfg80211] [ 917.191083] EAX: f601d4c4 EBX: 00000000 ECX: 00000000 EDX: f79e8600 [ 917.191176] ESI: f601d400 EDI: f95b4350 EBP: f6009eb4 ESP: f6009e8c [ 917.191269] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 917.191360] Process rmmod (pid: 1763, ti=f6008000 task=f79e8130 task.ti=f6008000) [ 917.191486] Stack: [ 917.191562] f601d5a0 f601d484 f6460e98 f6009ea0 c01407ee f6009eb8 00000246 f64604c0 [ 917.191916] <0> f6460e5c f95b4350 f6009ec0 f94fd030 f6460e98 f6009edc f95a9d4f f787bc00 [ 917.192100] <0> f787bc58 f787bc00 f95b4350 f95b4350 f6009ee8 c0207fca f787bc58 f6009ef8 [ 917.192100] Call Trace: [ 917.192100] [] ? trace_hardirqs_on+0xb/0xd [ 917.192100] [] ? unregister_ieee80211+0xe/0x27 [libipw] [ 917.192100] [] ? ipw_pci_remove+0x59/0x227 [ipw2200] [ 917.192100] [] ? pci_device_remove+0x19/0x39 [ 917.192100] [] ? __device_release_driver+0x59/0x9d [ 917.192100] [] ? driver_detach+0x67/0x85 [ 917.192100] [] ? bus_remove_driver+0x69/0x85 [ 917.192100] [] ? driver_unregister+0x4d/0x54 [ 917.192100] [] ? pci_unregister_driver+0x28/0x71 [ 917.192100] [] ? ipw_exit+0x1c/0x1e [ipw2200] [ 917.192100] [] ? sys_delete_module+0x192/0x1ef [ 917.192100] [] ? remove_vma+0x52/0x58 [ 917.192100] [] ? sysenter_exit+0xf/0x18 [ 917.192100] [] ? sysenter_do_call+0x12/0x36 [ 917.192100] Code: 74 07 e8 81 bc 8c c7 eb c8 8d 55 e0 89 f8 e8 d6 6d 66 c7 8b 45 dc 31 d2 e8 81 cc 8c c7 8d 86 c4 00 00 00 39 86 c4 00 00 00 74 04 <0f> 0b eb fe 8b 45 dc 8d 5e 0c e8 5a cc 8c c7 8b 86 94 03 00 00 [ 917.192100] EIP: [] wiphy_unregister+0xd3/0x175 [cfg80211] SS:ESP 0068:f6009e8c [ 917.203718] ---[ end trace bcaaf449945a5100 ]--- Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2100.c | 5 +---- drivers/net/wireless/ipw2x00/ipw2200.c | 2 -- drivers/net/wireless/ipw2x00/libipw.h | 1 - drivers/net/wireless/ipw2x00/libipw_module.c | 14 +++++--------- 4 files changed, 6 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index a741d37fd96..240cff1e697 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6325,10 +6325,8 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, fail: if (dev) { - if (registered) { - unregister_ieee80211(priv->ieee); + if (registered) unregister_netdev(dev); - } ipw2100_hw_stop_adapter(priv); @@ -6385,7 +6383,6 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) /* Unregister the device first - this results in close() * being called if the device is open. If we free storage * first, then close() will crash. */ - unregister_ieee80211(priv->ieee); unregister_netdev(dev); /* ipw2100_down will ensure that there is no more pending work diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 04341a2a619..8d58e6ed4e7 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11821,7 +11821,6 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, if (err) { IPW_ERROR("Failed to register promiscuous network " "device (error %d).\n", err); - unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); goto out_remove_sysfs; } @@ -11872,7 +11871,6 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) mutex_unlock(&priv->mutex); - unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); if (priv->rxq) { diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index f42ade6c2d3..bf45391172f 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -1020,7 +1020,6 @@ static inline int libipw_is_cck_rate(u8 rate) /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev, int monitor); extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); -extern void unregister_ieee80211(struct libipw_device *ieee); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index be5b809ec97..a0e9f6aed7d 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -235,19 +235,16 @@ void free_ieee80211(struct net_device *dev, int monitor) libipw_networks_free(ieee); /* free cfg80211 resources */ - if (!monitor) + if (!monitor) { + wiphy_unregister(ieee->wdev.wiphy); + kfree(ieee->a_band.channels); + kfree(ieee->bg_band.channels); wiphy_free(ieee->wdev.wiphy); + } free_netdev(dev); } -void unregister_ieee80211(struct libipw_device *ieee) -{ - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); -} - #ifdef CONFIG_LIBIPW_DEBUG static int debug = 0; @@ -333,4 +330,3 @@ module_init(libipw_init); EXPORT_SYMBOL(alloc_ieee80211); EXPORT_SYMBOL(free_ieee80211); -EXPORT_SYMBOL(unregister_ieee80211); -- GitLab From 198439e4afec431d2fa2cab9a4dcca87e5adc7a5 Mon Sep 17 00:00:00 2001 From: jack wang Date: Tue, 20 Oct 2009 16:10:45 +0800 Subject: [PATCH 0619/1165] [SCSI] libsas: do not set res = 0 in sas_ex_discover_dev() We should not set res to 0 in function sas_ex_discover_dev in order to let it discover it further when wide port hotplug in . Signed-off-by: Tom Peng Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index b3381959acc..33cf988c8c8 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -960,7 +960,6 @@ static int sas_ex_discover_dev(struct domain_device *dev, int phy_id) } } - res = 0; } return res; -- GitLab From 66f84d6594729c866c0c03fe97159a987dad7d84 Mon Sep 17 00:00:00 2001 From: Sean Cross Date: Thu, 5 Nov 2009 20:22:03 +0100 Subject: [PATCH 0620/1165] rt2x00: Don't queue ieee80211 work after USB removal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This prevents the rt2x00 driver from queueing ieee80211 work after the   USB card has been removed, preventing a kernel panic. Signed-off-by: Sean Cross Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00link.c | 11 +++++++---- drivers/net/wireless/rt2x00/rt2x00usb.c | 9 ++++++++- 3 files changed, 17 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 71761b34383..73bbec58341 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -815,6 +815,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) mutex_init(&rt2x00dev->csr_mutex); + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); + /* * Make room for rt2x00_intf inside the per-interface * structure ieee80211_vif. @@ -871,8 +873,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) rt2x00leds_register(rt2x00dev); rt2x00debug_register(rt2x00dev); - set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - return 0; exit: diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index c64db0ba7f4..c708d0be915 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -362,8 +362,9 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) rt2x00link_reset_tuner(rt2x00dev, false); - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->work, LINK_TUNE_INTERVAL); } void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev) @@ -469,8 +470,10 @@ static void rt2x00link_tuner(struct work_struct *work) * Increase tuner counter, and reschedule the next link tuner run. */ link->count++; - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); + + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->work, LINK_TUNE_INTERVAL); } void rt2x00link_register(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 501544882c2..f02b48a9059 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -47,6 +47,8 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, (requesttype == USB_VENDOR_REQUEST_IN) ? usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return -ENODEV; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { status = usb_control_msg(usb_dev, pipe, request, requesttype, @@ -60,8 +62,10 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, * -ENODEV: Device has disappeared, no point continuing. * All other errors: Try again. */ - else if (status == -ENODEV) + else if (status == -ENODEV) { + clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); break; + } } ERROR(rt2x00dev, @@ -161,6 +165,9 @@ int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, { unsigned int i; + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return -ENODEV; + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2x00usb_register_read_lock(rt2x00dev, offset, reg); if (!rt2x00_get_field32(*reg, field)) -- GitLab From 761434a318a64bf521f8abcc920e1d9837640fa2 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 6 Nov 2009 16:22:44 +0900 Subject: [PATCH 0621/1165] PCI ASPM: fix oops on root port removal Fix the following BUG_ON() problem reported by Alex Chiang. This problem happened when removing PCIe root port using PCI logical hotplug operation. The immediate cause of this problem is that the pointer to invalid data structure is passed to pcie_update_aspm_capable() by pcie_aspm_exit_link_state(). When pcie_aspm_exit_link_state() received a pointer to root port link, it unconfigures the root port link and frees its data structure at first. At this point, there are not links to configure under the root port and the data structure for root port link is already freed. So pcie_aspm_exit_link_state() must not call pcie_update_aspm_capable() and pcie_config_aspm_path(). This patch fixes the problem by changing pcie_aspm_exit_link_state() not to call pcie_update_aspm_capable() and pcie_config_aspm_path() if the specified link is root port link. ------------[ cut here ]------------ kernel BUG at drivers/pci/pcie/aspm.c:606! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:40/0000:40:13.0/remove CPU 1 Modules linked in: shpchp Pid: 9345, comm: sysfsd Not tainted 2.6.32-rc5 #98 ProLiant DL785 G6 RIP: 0010:[] [] pcie_update_aspm_capable+0x15/0xbe RSP: 0018:ffff88082a2f5ca0 EFLAGS: 00010202 RAX: 0000000000000e77 RBX: ffff88182cc3e000 RCX: ffff88082a33d006 RDX: 0000000000000001 RSI: ffffffff811dff4a RDI: ffff88182cc3e000 RBP: ffff88082a2f5cc0 R08: ffff88182cc3e000 R09: 0000000000000000 R10: ffff88182fc00180 R11: ffff88182fc00198 R12: ffff88182cc3e000 R13: 0000000000000000 R14: ffff88182cc3e000 R15: ffff88082a2f5e20 FS: 00007f259a64b6f0(0000) GS:ffff880864600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007feb53f73da0 CR3: 000000102cc94000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sysfsd (pid: 9345, threadinfo ffff88082a2f4000, task ffff88082a33cf00) Stack: ffff88182cc3e000 ffff88182cc3e000 0000000000000000 ffff88082a33cf00 <0> ffff88082a2f5cf0 ffffffff811dff52 ffff88082a2f5cf0 ffff88082c525168 <0> ffff88402c9fd2f8 ffff88402c9fd2f8 ffff88082a2f5d20 ffffffff811d7db2 Call Trace: [] pcie_aspm_exit_link_state+0xf5/0x11e [] pci_stop_bus_device+0x76/0x7e [] pci_stop_bus_device+0x2b/0x7e [] pci_remove_bus_device+0x15/0xb9 [] remove_callback+0x29/0x3a [] sysfs_schedule_callback_work+0x15/0x6d [] worker_thread+0x19d/0x298 [] ? worker_thread+0x148/0x298 [] ? sysfs_schedule_callback_work+0x0/0x6d [] ? autoremove_wake_function+0x0/0x38 [] ? worker_thread+0x0/0x298 [] kthread+0x7d/0x85 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x85 [] ? child_rip+0x0/0x20 Code: 89 e5 8a 50 48 31 c0 c0 ea 03 83 e2 07 e8 b2 de fe ff c9 48 98 c3 55 48 89 e5 41 56 49 89 fe 41 55 41 54 53 48 83 7f 10 00 74 04 <0f> 0b eb fe 48 8b 05 da 7d 63 00 4c 8d 60 e8 4c 89 e1 eb 24 4c RIP [] pcie_update_aspm_capable+0x15/0xbe RSP ---[ end trace 6ae0f65bdeab8555 ]--- Reported-by: Alex Chiang Signed-off-by: Kenji Kaneshige Tested-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 745402e8e49..5b7056cec00 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -656,8 +656,10 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev) free_link_state(link); /* Recheck latencies and configure upstream links */ - pcie_update_aspm_capable(root); - pcie_config_aspm_path(parent_link); + if (parent_link) { + pcie_update_aspm_capable(root); + pcie_config_aspm_path(parent_link); + } out: mutex_unlock(&aspm_lock); up_read(&pci_bus_sem); -- GitLab From ec06aedd44541129840ed52e6165afa3796a27bf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 6 Nov 2009 14:18:29 -0500 Subject: [PATCH 0622/1165] cifs: clean up handling when server doesn't consistently support inode numbers It's possible that a server will return a valid FileID when we query the FILE_INTERNAL_INFO for the root inode, but then zeroed out inode numbers when we do a FindFile with an infolevel of SMB_FIND_FILE_ID_FULL_DIR_INFO. In this situation turn off querying for server inode numbers, generate a warning for the user and just generate an inode number using iunique. Once we generate any inode number with iunique we can no longer use any server inode numbers or we risk collisions, so ensure that we don't do that in cifs_get_inode_info either. Cc: Stable Reported-by: Timothy Normand Miller Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 1 + fs/cifs/inode.c | 7 ++----- fs/cifs/misc.c | 14 ++++++++++++++ fs/cifs/readdir.c | 7 ++++--- 4 files changed, 21 insertions(+), 8 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 6928c24d1d4..5646727e33f 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -388,4 +388,5 @@ extern int CIFSSMBSetPosixACL(const int xid, struct cifsTconInfo *tcon, const struct nls_table *nls_codepage, int remap_special_chars); extern int CIFSGetExtAttr(const int xid, struct cifsTconInfo *tcon, const int netfid, __u64 *pExtAttrBits, __u64 *pMask); +extern void cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb); #endif /* _CIFSPROTO_H */ diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 5e2492535da..cababd8a52d 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -512,13 +512,10 @@ int cifs_get_inode_info(struct inode **pinode, cifs_sb->local_nls, cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR); - if (rc1) { + if (rc1 || !fattr.cf_uniqueid) { cFYI(1, ("GetSrvInodeNum rc %d", rc1)); fattr.cf_uniqueid = iunique(sb, ROOT_I); - /* disable serverino if call not supported */ - if (rc1 == -EINVAL) - cifs_sb->mnt_cifs_flags &= - ~CIFS_MOUNT_SERVER_INUM; + cifs_autodisable_serverino(cifs_sb); } } else { fattr.cf_uniqueid = iunique(sb, ROOT_I); diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 0241b25ac33..1e25efcb55c 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -715,3 +715,17 @@ cifsConvertToUCS(__le16 *target, const char *source, int maxlen, ctoUCS_out: return i; } + +void +cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb) +{ + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) { + cifs_sb->mnt_cifs_flags &= CIFS_MOUNT_SERVER_INUM; + cERROR(1, ("Autodisabling the use of server inode numbers on " + "%s. This server doesn't seem to support them " + "properly. Hardlinks will not be recognized on this " + "mount. Consider mounting with the \"noserverino\" " + "option to silence this message.", + cifs_sb->tcon->treeName)); + } +} diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 1f098ca7163..f84062f9a98 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -727,11 +727,12 @@ static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir, cifs_dir_info_to_fattr(&fattr, (FILE_DIRECTORY_INFO *) pfindEntry, cifs_sb); - /* FIXME: make _to_fattr functions fill this out */ - if (pCifsF->srch_inf.info_level == SMB_FIND_FILE_ID_FULL_DIR_INFO) + if (inum && (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) { fattr.cf_uniqueid = inum; - else + } else { fattr.cf_uniqueid = iunique(sb, ROOT_I); + cifs_autodisable_serverino(cifs_sb); + } ino = cifs_uniqueid_to_ino_t(fattr.cf_uniqueid); tmp_dentry = cifs_readdir_lookup(file->f_dentry, &qstring, &fattr); -- GitLab From f475f6775465283494346663f201ad04810d2e8a Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 6 Nov 2009 14:18:49 -0500 Subject: [PATCH 0623/1165] cifs: don't use CIFSGetSrvInodeNumber in is_path_accessible Because it's lighter weight, CIFS tries to use CIFSGetSrvInodeNumber to verify the accessibility of the root inode and then falls back to doing a full QPathInfo if that fails with -EOPNOTSUPP. I have at least a report of a server that returns NT_STATUS_INTERNAL_ERROR rather than something that translates to EOPNOTSUPP. Rather than trying to be clever with that call, just have is_path_accessible do a normal QPathInfo. That call is widely supported and it shouldn't increase the overhead significantly. Cc: Stable Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index b0909807991..63ea83ff687 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2220,16 +2220,8 @@ is_path_accessible(int xid, struct cifsTconInfo *tcon, struct cifs_sb_info *cifs_sb, const char *full_path) { int rc; - __u64 inode_num; FILE_ALL_INFO *pfile_info; - rc = CIFSGetSrvInodeNumber(xid, tcon, full_path, &inode_num, - cifs_sb->local_nls, - cifs_sb->mnt_cifs_flags & - CIFS_MOUNT_MAP_SPECIAL_CHR); - if (rc != -EOPNOTSUPP) - return rc; - pfile_info = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL); if (pfile_info == NULL) return -ENOMEM; -- GitLab From f1b291d4c47440cbfc1a478e88800e2742d60a80 Mon Sep 17 00:00:00 2001 From: Simon Kagstrom Date: Fri, 6 Nov 2009 15:44:04 +0100 Subject: [PATCH 0624/1165] x86: Add Phoenix/MSC BIOSes to lowmem corruption list We have a board with a Phoenix/MSC BIOS which also corrupts the low 64KB of RAM, so add an entry to the table. Signed-off-by: Simon Kagstrom LKML-Reference: <20091106154404.002648d9@marrow.netinsight.se> Signed-off-by: H. Peter Anvin --- arch/x86/kernel/setup.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index e09f0e2c14b..2a34f9c5be2 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -659,6 +659,13 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"), }, }, + { + .callback = dmi_low_memory_corruption, + .ident = "Phoenix/MSC BIOS", + .matches = { + DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix/MSC"), + }, + }, { /* * AMI BIOS with low memory corruption was found on Intel DG45ID board. -- GitLab From 539054a8fa5141c9a4e9ac6a86d249e3f2bdef45 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Fri, 6 Nov 2009 18:08:32 -0800 Subject: [PATCH 0625/1165] netfilter: xt_connlimit: fix regression caused by zero family value Commit v2.6.28-rc1~717^2~109^2~2 was slightly incomplete; not all instances of par->match->family were changed to par->family. References: http://bugzilla.netfilter.org/show_bug.cgi?id=610 Signed-off-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_connlimit.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c index 68098095439..38f03f75a63 100644 --- a/net/netfilter/xt_connlimit.c +++ b/net/netfilter/xt_connlimit.c @@ -103,7 +103,7 @@ static int count_them(struct xt_connlimit_data *data, const struct nf_conntrack_tuple *tuple, const union nf_inet_addr *addr, const union nf_inet_addr *mask, - const struct xt_match *match) + u_int8_t family) { const struct nf_conntrack_tuple_hash *found; struct xt_connlimit_conn *conn; @@ -113,8 +113,7 @@ static int count_them(struct xt_connlimit_data *data, bool addit = true; int matches = 0; - - if (match->family == NFPROTO_IPV6) + if (family == NFPROTO_IPV6) hash = &data->iphash[connlimit_iphash6(addr, mask)]; else hash = &data->iphash[connlimit_iphash(addr->ip & mask->ip)]; @@ -157,8 +156,7 @@ static int count_them(struct xt_connlimit_data *data, continue; } - if (same_source_net(addr, mask, &conn->tuple.src.u3, - match->family)) + if (same_source_net(addr, mask, &conn->tuple.src.u3, family)) /* same source network -> be counted! */ ++matches; nf_ct_put(found_ct); @@ -207,7 +205,7 @@ connlimit_mt(const struct sk_buff *skb, const struct xt_match_param *par) spin_lock_bh(&info->data->lock); connections = count_them(info->data, tuple_ptr, &addr, - &info->mask, par->match); + &info->mask, par->family); spin_unlock_bh(&info->data->lock); if (connections < 0) { -- GitLab From 9e90c961134929678022aee0c68b16c1ed520614 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 6 Nov 2009 02:06:59 +0000 Subject: [PATCH 0626/1165] be2net: fix to set proper flow control on resume If be2 goes into suspend after a user changes the flow control settings, we are not programming them back after resume. This patch takes care of it. We now get the flow control settings before going to suspend mode and then apply them during resume. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 2 ++ drivers/net/benet/be_ethtool.c | 8 +++++--- drivers/net/benet/be_main.c | 8 +++++++- 3 files changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index a80da0e14a5..3b79a225628 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -259,6 +259,8 @@ struct be_adapter { u32 port_num; bool promiscuous; u32 cap; + u32 rx_fc; /* Rx flow control */ + u32 tx_fc; /* Tx flow control */ }; extern const struct ethtool_ops be_ethtool_ops; diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index cda5bf2fc50..f0fd95b43c0 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -323,10 +323,12 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd) if (ecmd->autoneg != 0) return -EINVAL; + adapter->tx_fc = ecmd->tx_pause; + adapter->rx_fc = ecmd->rx_pause; - status = be_cmd_set_flow_control(adapter, ecmd->tx_pause, - ecmd->rx_pause); - if (!status) + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) dev_warn(&adapter->pdev->dev, "Pause param set failed.\n"); return status; diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 1f941f02771..4a7a4527182 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1652,7 +1652,8 @@ static int be_setup(struct be_adapter *adapter) if (status != 0) goto mccqs_destroy; - status = be_cmd_set_flow_control(adapter, true, true); + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); if (status != 0) goto mccqs_destroy; return 0; @@ -1909,6 +1910,10 @@ static void be_netdev_init(struct net_device *netdev) adapter->rx_csum = true; + /* Default settings for Rx and Tx flow control */ + adapter->rx_fc = true; + adapter->tx_fc = true; + netif_set_gso_max_size(netdev, 65535); BE_SET_NETDEV_OPS(netdev, &be_netdev_ops); @@ -2171,6 +2176,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state) be_close(netdev); rtnl_unlock(); } + be_cmd_get_flow_control(adapter, &adapter->tx_fc, &adapter->rx_fc); be_clear(adapter); pci_save_state(pdev); -- GitLab From 4f2aa89cd263932d61f286307771996df76bf63e Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 6 Nov 2009 02:07:32 +0000 Subject: [PATCH 0627/1165] be2net: Bug fix to send config commands to hardware after netdev_register Sending config commands to be2 hardware before netdev_register is completed, is sometimes causing the async link notification to arrive even before the driver is ready to handle it. The commands for vlan config and flow control settings can infact wait till be_open. This patch takes care of that. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 4a7a4527182..876b357101f 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1610,11 +1610,21 @@ static int be_open(struct net_device *netdev) status = be_cmd_link_status_query(adapter, &link_up); if (status) - return status; + goto ret_sts; be_link_status_update(adapter, link_up); + status = be_vid_config(adapter); + if (status) + goto ret_sts; + + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) + goto ret_sts; + schedule_delayed_work(&adapter->work, msecs_to_jiffies(100)); - return 0; +ret_sts: + return status; } static int be_setup(struct be_adapter *adapter) @@ -1648,18 +1658,8 @@ static int be_setup(struct be_adapter *adapter) if (status != 0) goto rx_qs_destroy; - status = be_vid_config(adapter); - if (status != 0) - goto mccqs_destroy; - - status = be_cmd_set_flow_control(adapter, - adapter->tx_fc, adapter->rx_fc); - if (status != 0) - goto mccqs_destroy; return 0; -mccqs_destroy: - be_mcc_queues_destroy(adapter); rx_qs_destroy: be_rx_queues_destroy(adapter); tx_qs_destroy: -- GitLab From 2b2072e902848a63168570f500a5726744b3873a Mon Sep 17 00:00:00 2001 From: Sebastian Haas Date: Wed, 4 Nov 2009 05:48:33 +0000 Subject: [PATCH 0628/1165] ems_usb: Fix byte order issues on big endian machines CPC-USB is using a ARM7 core with little endian byte order. The "id" field in can_msg needs byte order conversion from/to CPU byte order. Signed-off-by: Sebastian Haas Signed-off-by: David S. Miller --- drivers/net/can/usb/ems_usb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 9012e0abc62..abdbd9c2b78 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -319,7 +319,7 @@ static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg) cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); - cf->can_id = msg->msg.can_msg.id; + cf->can_id = le32_to_cpu(msg->msg.can_msg.id); cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8); if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME @@ -813,6 +813,9 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc; } + /* Respect byte order */ + msg->msg.can_msg.id = cpu_to_le32(msg->msg.can_msg.id); + for (i = 0; i < MAX_TX_URBS; i++) { if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) { context = &dev->tx_contexts[i]; -- GitLab From 87d75b52414a22c54cf8382bcdd329376b1bce78 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 5 Nov 2009 23:14:29 +0000 Subject: [PATCH 0629/1165] NET: cassini, fix lock imbalance Stanse found that one error path in cas_open omits to unlock pm_mutex. Fix that. Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller --- drivers/net/cassini.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 05916aafa4f..f857afe8e48 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -4342,11 +4342,11 @@ static int cas_open(struct net_device *dev) cas_unlock_all_restore(cp, flags); } + err = -ENOMEM; if (cas_tx_tiny_alloc(cp) < 0) - return -ENOMEM; + goto err_unlock; /* alloc rx descriptors */ - err = -ENOMEM; if (cas_alloc_rxds(cp) < 0) goto err_tx_tiny; @@ -4386,6 +4386,7 @@ err_spare: cas_free_rxds(cp); err_tx_tiny: cas_tx_tiny_free(cp); +err_unlock: mutex_unlock(&cp->pm_mutex); return err; } -- GitLab From dcaa6a9414cdc767c0afba4705c25ae9cf6096b5 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Tue, 3 Nov 2009 03:42:40 +0000 Subject: [PATCH 0630/1165] macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/macsonic.c | 117 +++++++++++++++++++++-------------------- 1 file changed, 60 insertions(+), 57 deletions(-) diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c index 61eabcac734..b3d7d8d77f4 100644 --- a/drivers/net/macsonic.c +++ b/drivers/net/macsonic.c @@ -223,69 +223,73 @@ static int __devinit macsonic_init(struct net_device *dev) return 0; } -static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) +#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \ + memcmp(mac, "\x00\xA0\x40", 3) && \ + memcmp(mac, "\x00\x80\x19", 3) && \ + memcmp(mac, "\x00\x05\x02", 3)) + +static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) { struct sonic_local *lp = netdev_priv(dev); const int prom_addr = ONBOARD_SONIC_PROM_BASE; - int i; + unsigned short val; - /* On NuBus boards we can sometimes look in the ROM resources. - No such luck for comm-slot/onboard. */ - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SONIC_READ_PROM(i); + /* + * On NuBus boards we can sometimes look in the ROM resources. + * No such luck for comm-slot/onboard. + * On the PowerBook 520, the PROM base address is a mystery. + */ + if (hwreg_present((void *)prom_addr)) { + int i; + + for (i = 0; i < 6; i++) + dev->dev_addr[i] = SONIC_READ_PROM(i); + if (!INVALID_MAC(dev->dev_addr)) + return; - /* Most of the time, the address is bit-reversed. The NetBSD - source has a rather long and detailed historical account of - why this is so. */ - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) + /* + * Most of the time, the address is bit-reversed. The NetBSD + * source has a rather long and detailed historical account of + * why this is so. + */ bit_reverse_addr(dev->dev_addr); - else - return 0; - - /* If we still have what seems to be a bogus address, we'll - look in the CAM. The top entry should be ours. */ - /* Danger! This only works if MacOS has already initialized - the card... */ - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - { - unsigned short val; - - printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n"); - - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - SONIC_WRITE(SONIC_CEP, 15); - - val = SONIC_READ(SONIC_CAP2); - dev->dev_addr[5] = val >> 8; - dev->dev_addr[4] = val & 0xff; - val = SONIC_READ(SONIC_CAP1); - dev->dev_addr[3] = val >> 8; - dev->dev_addr[2] = val & 0xff; - val = SONIC_READ(SONIC_CAP0); - dev->dev_addr[1] = val >> 8; - dev->dev_addr[0] = val & 0xff; - - printk(KERN_INFO "HW Address from CAM 15: %pM\n", - dev->dev_addr); - } else return 0; - - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - { + if (!INVALID_MAC(dev->dev_addr)) + return; + /* - * Still nonsense ... messed up someplace! + * If we still have what seems to be a bogus address, we'll + * look in the CAM. The top entry should be ours. */ - printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n"); - return -EIO; - } else return 0; + printk(KERN_WARNING "macsonic: MAC address in PROM seems " + "to be invalid, trying CAM\n"); + } else { + printk(KERN_WARNING "macsonic: cannot read MAC address from " + "PROM, trying CAM\n"); + } + + /* This only works if MacOS has already initialized the card. */ + + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP, 15); + + val = SONIC_READ(SONIC_CAP2); + dev->dev_addr[5] = val >> 8; + dev->dev_addr[4] = val & 0xff; + val = SONIC_READ(SONIC_CAP1); + dev->dev_addr[3] = val >> 8; + dev->dev_addr[2] = val & 0xff; + val = SONIC_READ(SONIC_CAP0); + dev->dev_addr[1] = val >> 8; + dev->dev_addr[0] = val & 0xff; + + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* Still nonsense ... messed up someplace! */ + + printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 " + "seems invalid, will use a random MAC\n"); + random_ether_addr(dev->dev_addr); } static int __devinit mac_onboard_sonic_probe(struct net_device *dev) @@ -402,8 +406,7 @@ static int __devinit mac_onboard_sonic_probe(struct net_device *dev) SONIC_WRITE(SONIC_ISR, 0x7fff); /* Now look for the MAC address. */ - if (mac_onboard_sonic_ethernet_addr(dev) != 0) - return -ENODEV; + mac_onboard_sonic_ethernet_addr(dev); /* Shared init code */ return macsonic_init(dev); -- GitLab From b352e40da8977253f49850a24f6448653a459ac0 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 6 Nov 2009 12:55:38 +0000 Subject: [PATCH 0631/1165] ixgbe: Fix gso_max_size for 82599 when DCB is enabled The 32k gso_max_size when DCB is enabled is for 82598 only, not for 82599. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index cbb143ca1eb..26fc1df2b2e 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2471,7 +2471,10 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) ixgbe_restore_vlan(adapter); #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - netif_set_gso_max_size(netdev, 32768); + if (hw->mac.type == ixgbe_mac_82598EB) + netif_set_gso_max_size(netdev, 32768); + else + netif_set_gso_max_size(netdev, 65536); ixgbe_configure_dcb(adapter); } else { netif_set_gso_max_size(netdev, 65536); -- GitLab From 26f23d82dd8eae6dcc2ab99c04a9256089576a73 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 6 Nov 2009 12:56:00 +0000 Subject: [PATCH 0632/1165] ixgbe: Fix checking TFCS register for TXOFF status when DCB is enabled When DCB is enabled, the ixgbe_check_tx_hang() should check the corresponding TC's TXOFF in TFCS based on the TC that the tx ring belongs to. Adds a function to map from the tx_ring hw reg_idx to the correspodning TC and read TFCS accordingly. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 52 +++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 26fc1df2b2e..2d0f618b4a9 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -226,6 +226,56 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, /* tx_buffer_info must be completely set up in the transmit path */ } +/** + * ixgbe_tx_is_paused - check if the tx ring is paused + * @adapter: the ixgbe adapter + * @tx_ring: the corresponding tx_ring + * + * If not in DCB mode, checks TFCS.TXOFF, otherwise, find out the + * corresponding TC of this tx_ring when checking TFCS. + * + * Returns : true if paused + */ +static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring) +{ + int tc; + u32 txoff = IXGBE_TFCS_TXOFF; + +#ifdef CONFIG_IXGBE_DCB + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + int reg_idx = tx_ring->reg_idx; + int dcb_i = adapter->ring_feature[RING_F_DCB].indices; + + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + tc = reg_idx >> 2; + txoff = IXGBE_TFCS_TXOFF0; + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + tc = 0; + txoff = IXGBE_TFCS_TXOFF; + if (dcb_i == 8) { + /* TC0, TC1 */ + tc = reg_idx >> 5; + if (tc == 2) /* TC2, TC3 */ + tc += (reg_idx - 64) >> 4; + else if (tc == 3) /* TC4, TC5, TC6, TC7 */ + tc += 1 + ((reg_idx - 96) >> 3); + } else if (dcb_i == 4) { + /* TC0, TC1 */ + tc = reg_idx >> 6; + if (tc == 1) { + tc += (reg_idx - 64) >> 5; + if (tc == 2) /* TC2, TC3 */ + tc += (reg_idx - 96) >> 4; + } + } + } + txoff <<= tc; + } +#endif + return IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & txoff; +} + static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring, unsigned int eop) @@ -237,7 +287,7 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, adapter->detect_tx_hung = false; if (tx_ring->tx_buffer_info[eop].time_stamp && time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) && - !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) { + !ixgbe_tx_is_paused(adapter, tx_ring)) { /* detected Tx unit hang */ union ixgbe_adv_tx_desc *tx_desc; tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); -- GitLab From ee5f784a2d48cdacf561e99b2d01b23364189474 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Fri, 6 Nov 2009 12:56:20 +0000 Subject: [PATCH 0633/1165] ixgbe: fix traffic hangs on Tx with ioatdma loaded When ioatdma was loaded we we were unable to transmit traffic. We weren't using the correct registers in ixgbe_update_tx_dca for 82599 systems. Likewise in ixgbe_configure_tx() we weren't disabling the arbiter before modifying MTQC. Signed-off-by: Don Skidmore Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 2d0f618b4a9..5bd9e6bf6f2 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -44,6 +44,7 @@ #include "ixgbe.h" #include "ixgbe_common.h" +#include "ixgbe_dcb_82599.h" char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = @@ -462,19 +463,23 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, u32 txctrl; int cpu = get_cpu(); int q = tx_ring - adapter->tx_ring; + struct ixgbe_hw *hw = &adapter->hw; if (tx_ring->cpu != cpu) { - txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q)); if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl); } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599; txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) << - IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl); } - txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl); tx_ring->cpu = cpu; } put_cpu(); @@ -1963,11 +1968,25 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) break; } } + if (hw->mac.type == ixgbe_mac_82599EB) { + u32 rttdcs; + + /* disable the arbiter while setting MTQC */ + rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS); + rttdcs |= IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); + /* We enable 8 traffic classes, DCB only */ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ)); + else + IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB); + + /* re-eable the arbiter */ + rttdcs &= ~IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); } } -- GitLab From 60fa6c374e7efcbed04bc6d11d3b35645c523b2f Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Fri, 6 Nov 2009 07:44:57 +0000 Subject: [PATCH 0634/1165] qlge: Fix early exit from mbox cmd complete wait. This line was accidentally left out of the previous commit # da03945140a035a2962f7f93e359085596f20499 ("qlge: Fix firmware mailbox command timeout."). Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qlge/qlge_mpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index bcf13c96f73..aec05f26610 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -499,7 +499,7 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) /* Wait for the interrupt to come in. */ status = ql_wait_mbx_cmd_cmplt(qdev); if (status) - goto end; + continue; /* Process the event. If it's an AEN, it * will be handled in-line or a worker -- GitLab From 73475339005dc68eb0bd2f6b1e93a3a39b628410 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Fri, 6 Nov 2009 07:44:58 +0000 Subject: [PATCH 0635/1165] qlge: Set PCIe reset type for EEH to fundamental. This device requires a fundamental reset when recovering from EEH. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qlge/qlge_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index cea7531f4f4..a2fc70a0d0c 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -3916,6 +3916,8 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } + /* Set PCIe reset type for EEH to fundamental. */ + pdev->needs_freset = 1; pci_save_state(pdev); qdev->reg_base = ioremap_nocache(pci_resource_start(pdev, 1), -- GitLab From 23ca0c989e46924393f1d54bec84801d035dd28e Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Fri, 6 Nov 2009 10:37:41 +0000 Subject: [PATCH 0636/1165] ipip: Fix handling of DF packets when pmtudisc is OFF RFC 2003 requires the outer header to have DF set if DF is set on the inner header, even when PMTU discovery is off for the tunnel. Our implementation does exactly that. For this to work properly the IPIP gateway also needs to engate in PMTU when the inner DF bit is set. As otherwise the original host would not be able to carry out its PMTU successfully since part of the path is only visible to the gateway. Unfortunately when the tunnel PMTU discovery setting is off, we do not collect the necessary soft state, resulting in blackholes when the original host tries to perform PMTU discovery. This problem is not reproducible on the IPIP gateway itself as the inner packet usually has skb->local_df set. This is not correctly cleared (an unrelated bug) when the packet passes through the tunnel, which allows fragmentation to occur. For hosts behind the IPIP gateway it is readily visible with a simple ping. This patch fixes the problem by performing PMTU discovery for all packets with the inner DF bit set, regardless of the PMTU discovery setting on the tunnel itself. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/ipv4/ipip.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c index 08ccd344de7..ae40ed1ba56 100644 --- a/net/ipv4/ipip.c +++ b/net/ipv4/ipip.c @@ -438,25 +438,27 @@ static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev) goto tx_error; } - if (tiph->frag_off) + df |= old_iph->frag_off & htons(IP_DF); + + if (df) { mtu = dst_mtu(&rt->u.dst) - sizeof(struct iphdr); - else - mtu = skb_dst(skb) ? dst_mtu(skb_dst(skb)) : dev->mtu; - if (mtu < 68) { - stats->collisions++; - ip_rt_put(rt); - goto tx_error; - } - if (skb_dst(skb)) - skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu); + if (mtu < 68) { + stats->collisions++; + ip_rt_put(rt); + goto tx_error; + } - df |= (old_iph->frag_off&htons(IP_DF)); + if (skb_dst(skb)) + skb_dst(skb)->ops->update_pmtu(skb_dst(skb), mtu); - if ((old_iph->frag_off&htons(IP_DF)) && mtu < ntohs(old_iph->tot_len)) { - icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, htonl(mtu)); - ip_rt_put(rt); - goto tx_error; + if ((old_iph->frag_off & htons(IP_DF)) && + mtu < ntohs(old_iph->tot_len)) { + icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED, + htonl(mtu)); + ip_rt_put(rt); + goto tx_error; + } } if (tunnel->err_count > 0) { -- GitLab From cc05368c52fed7d9efa0f56c5270e95bb569713e Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Fri, 6 Nov 2009 14:52:34 +0000 Subject: [PATCH 0637/1165] hisax: remove bad udelay call to fix build error on ARM The hisax ISDN driver fails to build on ARM with CONFIG_HISAX_ELSA: | drivers/built-in.o: In function `modem_set_dial': | drivers/isdn/hisax/elsa_ser.c:535: undefined reference to `__bad_udelay' | drivers/isdn/hisax/elsa_ser.c:544: undefined reference to `__bad_udelay' | drivers/built-in.o: In function `modem_set_init': | drivers/isdn/hisax/elsa_ser.c:486: undefined reference to `__bad_udelay' | [...] According to the comment in arch/arm/include/asm/delay.h, __bad_udelay is specifically designed on ARM to produce a build failure when udelay is called with a value > 2000. Signed-off-by: Martin Michlmayr Signed-off-by: David S. Miller --- drivers/isdn/hisax/elsa_ser.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/isdn/hisax/elsa_ser.c b/drivers/isdn/hisax/elsa_ser.c index f181db46439..1657bba7879 100644 --- a/drivers/isdn/hisax/elsa_ser.c +++ b/drivers/isdn/hisax/elsa_ser.c @@ -477,62 +477,62 @@ static void modem_set_init(struct IsdnCardState *cs) { int timeout; -#define RCV_DELAY 20000 +#define RCV_DELAY 20 modem_write_cmd(cs, MInit_1, strlen(MInit_1)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_2, strlen(MInit_2)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_3, strlen(MInit_3)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_4, strlen(MInit_4)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY ); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_5, strlen(MInit_5)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_6, strlen(MInit_6)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_7, strlen(MInit_7)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); } static void modem_set_dial(struct IsdnCardState *cs, int outgoing) { int timeout; -#define RCV_DELAY 20000 +#define RCV_DELAY 20 modem_write_cmd(cs, MInit_speed28800, strlen(MInit_speed28800)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); if (outgoing) modem_write_cmd(cs, MInit_dialout, strlen(MInit_dialout)); else @@ -541,7 +541,7 @@ modem_set_dial(struct IsdnCardState *cs, int outgoing) { while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); } static void -- GitLab From 70edc800a39327174d3244f9226ce8cacd01dc91 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 6 Nov 2009 22:41:29 +0000 Subject: [PATCH 0638/1165] sound: Replace old style lock initializer SPIN_LOCK_UNLOCKED is deprecated. Use __SPIN_LOCK_UNLOCKED instead. Signed-off-by: Thomas Gleixner Signed-off-by: Takashi Iwai --- sound/oss/dmasound/dmasound_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/oss/dmasound/dmasound_core.c b/sound/oss/dmasound/dmasound_core.c index 793b7f47843..3f3c3f71db4 100644 --- a/sound/oss/dmasound/dmasound_core.c +++ b/sound/oss/dmasound/dmasound_core.c @@ -219,7 +219,9 @@ static int shared_resources_initialised; * Mid level stuff */ -struct sound_settings dmasound = { .lock = SPIN_LOCK_UNLOCKED }; +struct sound_settings dmasound = { + .lock = __SPIN_LOCK_UNLOCKED(dmasound.lock) +}; static inline void sound_silence(void) { -- GitLab From f495088210c8b9e20791d995a8210170c68d2deb Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Fri, 6 Nov 2009 23:44:53 +0200 Subject: [PATCH 0639/1165] ALSA: usb-audio: fix combine_word problem Fix combine_word problem where first octet is not read properly. The only affected place seems to be the INPUT_TERMINAL type. Before now, sound controls can be created with the output terminal's name which is a fallback mechanism used only for unknown input terminal types. For example, Line can wrongly appear as Speaker. After the change it should appear as Line. The side effect of this change can be that users can expect the wrong control name in their scripts or programs while now we return the correct one. Probably, these defines should use get_unaligned_le16 and friends. Signed-off-by: Julian Anastasov Cc: Signed-off-by: Takashi Iwai --- sound/usb/usbaudio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 8e7f78941ba..e9a3a9dca15 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -210,7 +210,7 @@ struct snd_usb_midi_endpoint_info { /* */ -#define combine_word(s) ((*s) | ((unsigned int)(s)[1] << 8)) +#define combine_word(s) ((*(s)) | ((unsigned int)(s)[1] << 8)) #define combine_triple(s) (combine_word(s) | ((unsigned int)(s)[2] << 16)) #define combine_quad(s) (combine_triple(s) | ((unsigned int)(s)[3] << 24)) -- GitLab From 1a6969788ef2d5bc3169eee59def6b267182f136 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 7 Nov 2009 09:49:04 +0100 Subject: [PATCH 0640/1165] ALSA: hda - Don't initialize CORB/RIRB for single_cmd mode So far, CORB/RIRB still remains even if the driver is switched to the single_cmd mode. The specification says that this should be disabled, but I hoped this isn't the case; indeed most devices worked together with CORB/RIRB. However, Poulsbo (US15W) seems problematic with this setup, and it requires to disable CORB/RIRB when single_cmd is used. Now this patch disables CORB/RIRB initialization when the single_cmd mode is used. Also the unsolicited event is disabled because it can't work without RIRB. Reported-and-tested-by: Troy Kisky Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e340792f6cb..6517f589d01 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -722,9 +722,10 @@ static unsigned int azx_rirb_get_response(struct hda_bus *bus, chip->last_cmd[addr]); chip->single_cmd = 1; bus->response_reset = 0; - /* re-initialize CORB/RIRB */ + /* release CORB/RIRB */ azx_free_cmd_io(chip); - azx_init_cmd_io(chip); + /* disable unsolicited responses */ + azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_UNSOL); return -1; } @@ -865,7 +866,9 @@ static int azx_reset(struct azx *chip) } /* Accept unsolicited responses */ - azx_writel(chip, GCTL, azx_readl(chip, GCTL) | ICH6_GCTL_UNSOL); + if (!chip->single_cmd) + azx_writel(chip, GCTL, azx_readl(chip, GCTL) | + ICH6_GCTL_UNSOL); /* detect codecs */ if (!chip->codec_mask) { @@ -980,7 +983,8 @@ static void azx_init_chip(struct azx *chip) azx_int_enable(chip); /* initialize the codec command I/O */ - azx_init_cmd_io(chip); + if (!chip->single_cmd) + azx_init_cmd_io(chip); /* program the position buffer */ azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr); -- GitLab From 3806e94b0148350c72f9a3214274026b6ca03f49 Mon Sep 17 00:00:00 2001 From: Crane Cai Date: Sat, 7 Nov 2009 13:10:46 +0100 Subject: [PATCH 0641/1165] i2c-piix4: Modify code name SB900 to Hudson-2 Change SB900 to its formal code name Hudson-2. Signed-off-by: Crane Cai Signed-off-by: Jean Delvare --- Documentation/i2c/busses/i2c-piix4 | 2 +- drivers/i2c/busses/Kconfig | 2 +- drivers/i2c/busses/i2c-piix4.c | 8 ++++---- include/linux/pci_ids.h | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index c5b37c57055..ac540c71c7e 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -8,7 +8,7 @@ Supported adapters: Datasheet: Only available via NDA from ServerWorks * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges Datasheet: Not publicly available - * AMD SB900 + * AMD Hudson-2 Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 737335ff2b2..e8fe7f169e2 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -128,7 +128,7 @@ config I2C_PIIX4 ATI SB600 ATI SB700 ATI SB800 - AMD SB900 + AMD Hudson-2 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6 diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index d26a972aaca..1e245e9cad3 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -22,7 +22,7 @@ Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 - AMD SB900 + AMD Hudson-2 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. @@ -233,9 +233,9 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, unsigned short smba_idx = 0xcd6; u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; - /* SB800 SMBus does not support forcing address */ + /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { - dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support " + dev_err(&PIIX4_dev->dev, "SMBus does not support " "forcing address!\n"); return -EINVAL; } @@ -480,7 +480,7 @@ static struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b0f0f3851cd..9ceb392cb98 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -543,7 +543,7 @@ #define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450 #define PCI_DEVICE_ID_AMD_8131_APIC 0x7451 #define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 -#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b +#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b #define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F #define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090 #define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091 -- GitLab From afa08974fe80c198b8650f73ed8ab59135ca10d0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 7 Nov 2009 13:10:46 +0100 Subject: [PATCH 0642/1165] i2c: Add an interface to lock/unlock an I2C bus segment Some drivers need to be able to prevent access to an I2C bus segment for a specific period of time. Add an interface for them to do so without twiddling with i2c-core internals. Signed-off-by: Jean Delvare Acked-by: Ben Hutchings --- drivers/net/sfc/sfe4001.c | 4 ++-- include/linux/i2c.h | 18 ++++++++++++++++++ 2 files changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index cee00ad49b5..49eb91b5f50 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx) efx_oword_t reg; /* GPIO 3 and the GPIO register are shared with I2C, so block that */ - mutex_lock(&efx->i2c_adap.bus_lock); + i2c_lock_adapter(&efx->i2c_adap); /* Pull RST_N (GPIO 2) low then let it up again, setting the * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the @@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx) falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1); - mutex_unlock(&efx->i2c_adap.bus_lock); + i2c_unlock_adapter(&efx->i2c_adap); ssleep(1); return 0; diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 57d41b0abce..7b40cda57a7 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -361,6 +361,24 @@ static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data) dev_set_drvdata(&dev->dev, data); } +/** + * i2c_lock_adapter - Prevent access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static inline void i2c_lock_adapter(struct i2c_adapter *adapter) +{ + mutex_lock(&adapter->bus_lock); +} + +/** + * i2c_unlock_adapter - Reauthorize access to an I2C bus segment + * @adapter: Target I2C bus segment + */ +static inline void i2c_unlock_adapter(struct i2c_adapter *adapter) +{ + mutex_unlock(&adapter->bus_lock); +} + /*flags for the client struct: */ #define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */ #define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */ -- GitLab From 2b5d9946bc6bfdfa489f099eb59bcc15f8ae5afa Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 27 Sep 2009 19:11:34 -0300 Subject: [PATCH 0643/1165] V4L/DVB (13048): dib0070: fix build dependency when driver is disabled Fix build dependency on function, dib0070_ctrl_agc_filter [mchehab@redhat.com: reverted the quick workaround 3f48258e50ef4] Signed-off-by: Michael Krufky Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 2 +- drivers/media/dvb/frontends/dib0070.h | 7 ++++++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 9744b069241..0e4b97fba38 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -75,7 +75,7 @@ config DVB_USB_DIB0700 select DVB_DIB3000MC if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT3305 if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0070 + select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 8a2e1e710ad..eec9e52ffa7 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -51,6 +51,7 @@ struct dib0070_config { #if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); extern u16 dib0070_wbd_offset(struct dvb_frontend *); +extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); #else static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) { @@ -63,7 +64,11 @@ static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe) printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -ENODEV; } + +static inline void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} #endif -extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); #endif -- GitLab From 1e13c8f0c97c883287b1940719d0040fd38fcd58 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Sat, 19 Sep 2009 05:24:40 -0300 Subject: [PATCH 0644/1165] V4L/DVB (13050): DIB0700: fix-up USB device ID for Terratec/Leadtek git commit db48138f6bc4d2b613b08731ffc8b319432ebc25 changed by accident the assignment of certain USB IDs to their device-specific-handlers. Thanks to Edward Sheldrake for finding this regression Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 0b2812aa30a..6bd8951ea02 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1925,7 +1925,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { { NULL }, }, { "Leadtek Winfast DTV Dongle (STK7700P based)", - { &dib0700_usb_id_table[8] }, + { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, { NULL }, }, { "AVerMedia AVerTV DVB-T Express", @@ -2064,7 +2064,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 12, + .num_device_descs = 11, .devices = { { "DiBcom STK7070P reference design", { &dib0700_usb_id_table[15], NULL }, @@ -2098,11 +2098,6 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[30], NULL }, { NULL }, }, - { "Terratec Cinergy T USB XXS/ T3", - { &dib0700_usb_id_table[33], - &dib0700_usb_id_table[52], NULL }, - { NULL }, - }, { "Elgato EyeTV DTT", { &dib0700_usb_id_table[49], NULL }, { NULL }, @@ -2343,8 +2338,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[59], NULL }, { NULL }, }, - { "Terratec Cinergy T USB XXS (HD)", - { &dib0700_usb_id_table[34], &dib0700_usb_id_table[60] }, + { "Terratec Cinergy T USB XXS (HD)/ T3", + { &dib0700_usb_id_table[33], + &dib0700_usb_id_table[52], + &dib0700_usb_id_table[60], NULL}, { NULL }, }, }, -- GitLab From 7646b9de26c54cf4bc9c446d7ada9f91ece31e0a Mon Sep 17 00:00:00 2001 From: Martin Samek Date: Wed, 30 Sep 2009 22:59:09 -0300 Subject: [PATCH 0645/1165] V4L/DVB (13079): dib0700: fixed xc2028 firmware loading kernel oops Fixing kernel oops when driver attemps to load xc2028 firmware. Note by djh: the patch contribute by Martin is a port of a fix I made during the PCTV 340e development. It's a temporary workaround that fixes a regression (an OOPS condition) and the real fix should be in the code that manages the i2c master on the dib7000p. But this fix does address the immmediate regression and should be merged upstream until we do a cleaner fix. Signed-off-by: Martin Samek Signed-off-by: Devin Heitmueller CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/dib7000p.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 55ef6eeb076..0781f94e05d 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -1375,6 +1375,11 @@ struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, if (dib7000p_identify(st) != 0) goto error; + /* FIXME: make sure the dev.parent field is initialized, or else + request_firmware() will hit an OOPS (this should be moved somewhere + more common) */ + st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent; + dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr); dib7000p_demod_reset(st); -- GitLab From 4d8317876d5f53ef792e90f89d8f162d7bca5c81 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 27 Sep 2009 14:05:12 -0300 Subject: [PATCH 0646/1165] V4L/DVB (13107): tda18271: fix overflow in FM radio frequency calculation Multiplication by 62500 causes an overflow in the 32 bit freq variable, which is later divided by 1000 when using FM radio. This patch prevents the overflow by scaling the frequency value correctly upfront. Thanks to Henk Vergonet for spotting the problem and providing a preliminary patch, which this changeset was based upon. Cc: Henk Vergonet Signed-off-by: Michael Krufky CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda18271-fe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 64595112000..cccaf164a8f 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -1000,12 +1000,12 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, struct tda18271_std_map_item *map; char *mode; int ret; - u32 freq = params->frequency * 62500; + u32 freq = params->frequency * 125 * + ((params->mode == V4L2_TUNER_RADIO) ? 1 : 1000) / 2; priv->mode = TDA18271_ANALOG; if (params->mode == V4L2_TUNER_RADIO) { - freq = freq / 1000; map = &std_map->fm_radio; mode = "fm"; } else if (params->std & V4L2_STD_MN) { -- GitLab From a57c1dcb93e43357ed3f666e5a2b5d5071dd3930 Mon Sep 17 00:00:00 2001 From: Seth Barry Date: Sun, 27 Sep 2009 16:42:29 -0300 Subject: [PATCH 0647/1165] V4L/DVB (13109): tda18271: fix signedness issue in tda18271_rf_tracking_filters_init While having tda18271 module set with debug=17 (cal & info prints) and cal=0 (delay calibration process until first use) - I discovered that during the calibration process, if the frequency test for 69750000 returned a bcal of 0 (see tda18721-fe.c in tda18271_powerscan func) that the tuner wouldn't be able to pickup any of the frequencies in the range (all the other frequencies bands returned bcal=1). I spent some time going over the code and the NXP's tda18271 spec (ver.4 of it i think) and adding a lot of debug prints and walking/stepping through the calibration process. I found that when the powerscan fails to find a frequency, the rf calibration is not run and the default value is supposed to be used in its place (pulled from the RF_CAL_map table) - but something was getting goofed up there. Now, my c coding skills are very rusty, but i think root of the problem is a signedness issue with the math operation for calculating the rf_a1 and rf_a2 values in tda18271_rf_tracking_filters_init func, which results in values like 20648 for rf_a1 (when it should probably have a value like 0, or so slightly negative that it should be zero - this bad value for rf_a1 would in turn makes the approx calc within tda18271c2_rf_tracking_filters_correction go out of whack). The simplest solution i found was to explicitly convert the signedness of the denominator to avoid the implicit conversion. The values placed into the u32 rf_freq array should never exceed about 900mhz, so i think the s32 max value shouldn't be an issue in this case. I've tested it out a little, and even when i get a bcal=0 with the modified code, the default calibration value gets used, rf_a1 is zero, and the tuner seems to lock on the stream and mythtv seems to play it fine. Signed-off-by: Seth Barry Signed-off-by: Michael Krufky CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda18271-fe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index cccaf164a8f..3a50ce96fcb 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -616,13 +616,13 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) case RF2: map[i].rf_a1 = (prog_cal[RF2] - prog_tab[RF2] - prog_cal[RF1] + prog_tab[RF1]) / - ((rf_freq[RF2] - rf_freq[RF1]) / 1000); + (s32)((rf_freq[RF2] - rf_freq[RF1]) / 1000); map[i].rf2 = rf_freq[RF2] / 1000; break; case RF3: map[i].rf_a2 = (prog_cal[RF3] - prog_tab[RF3] - prog_cal[RF2] + prog_tab[RF2]) / - ((rf_freq[RF3] - rf_freq[RF2]) / 1000); + (s32)((rf_freq[RF3] - rf_freq[RF2]) / 1000); map[i].rf_b2 = prog_cal[RF2] - prog_tab[RF2]; map[i].rf3 = rf_freq[RF3] / 1000; break; -- GitLab From 1381dfd5150cfbdb5fa55ce7ab5ab56812111909 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 4 Oct 2009 14:04:47 -0300 Subject: [PATCH 0648/1165] V4L/DVB (13122): gscpa - stv06xx + ov518: dont discard every other frame When we call gspca_frame_add, it returns a pointer to the frame passed in, unless we call it with LAST_PACKET, when it will return a pointer to a new frame in which to store the frame data for the next frame. The frame pointer was not updated in stv06xx and ov518. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 2 +- drivers/media/video/gspca/stv06xx/stv06xx.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 2f6e135d94b..a5c190e9379 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -2919,7 +2919,7 @@ static void ov518_pkt_scan(struct gspca_dev *gspca_dev, /* A false positive here is likely, until OVT gives me * the definitive SOF/EOF format */ if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) { - gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); sd->packet_nr = 0; } diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index 65489d6b0d8..bfae63f5584 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -394,7 +394,8 @@ frame_data: PDEBUG(D_PACK, "End of frame detected"); /* Complete the last frame (if any) */ - gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + frame = gspca_frame_add(gspca_dev, LAST_PACKET, + frame, data, 0); if (chunk_len) PDEBUG(D_ERR, "Chunk length is " -- GitLab From 8cf1fec877c102beeae1e13624b1f7d20abbf8f9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:51:47 -0300 Subject: [PATCH 0649/1165] V4L/DVB (13129): sh_mobile_ceu_camera: fix cropping for scaling clients Fix a bug in cropping calculation, when the client is also scaling the image. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sh_mobile_ceu_camera.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 65ac474c517..2f78b4f263f 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1173,8 +1173,8 @@ static int get_scales(struct soc_camera_device *icd, width_in = scale_up(cam->ceu_rect.width, *scale_h); height_in = scale_up(cam->ceu_rect.height, *scale_v); - *scale_h = calc_generic_scale(cam->ceu_rect.width, icd->user_width); - *scale_v = calc_generic_scale(cam->ceu_rect.height, icd->user_height); + *scale_h = calc_generic_scale(width_in, icd->user_width); + *scale_v = calc_generic_scale(height_in, icd->user_height); return 0; } -- GitLab From 07bc46e6671b4533a5e56607ddec9de9079c1844 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:54:34 -0300 Subject: [PATCH 0650/1165] V4L/DVB (13131): pxa_camera: fix camera pixel format configuration A missed conversion prevents correct pixel format negotiation with client drivers. Reported-by: Antonio Ospite Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 6952e9602d5..aa831d53cf2 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1432,7 +1432,9 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, icd->sense = &sense; cam_f.fmt.pix.pixelformat = cam_fmt->fourcc; - ret = v4l2_subdev_call(sd, video, s_fmt, f); + ret = v4l2_subdev_call(sd, video, s_fmt, &cam_f); + cam_f.fmt.pix.pixelformat = pix->pixelformat; + *pix = cam_f.fmt.pix; icd->sense = NULL; -- GitLab From 76823b791d867c2ab563c237f188d0cbb4ced6e1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:54:54 -0300 Subject: [PATCH 0651/1165] V4L/DVB (13132): fix use-after-free Oops, resulting from a driver-core API change Commit b4028437876866aba4747a655ede00f892089e14 has broken again re-use of device objects across device_register() / device_unregister() cycles. Fix soc-camera by nullifying the struct after device_unregister(). Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/soc_camera.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 59aa7a3694c..36e617bd13c 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -1160,13 +1160,15 @@ void soc_camera_host_unregister(struct soc_camera_host *ici) if (icd->iface == ici->nr) { /* The bus->remove will be called */ device_unregister(&icd->dev); - /* Not before device_unregister(), .remove - * needs parent to call ici->ops->remove() */ - icd->dev.parent = NULL; - - /* If the host module is loaded again, device_register() - * would complain "already initialised" */ - memset(&icd->dev.kobj, 0, sizeof(icd->dev.kobj)); + /* + * Not before device_unregister(), .remove + * needs parent to call ici->ops->remove(). + * If the host module is loaded again, device_register() + * would complain "already initialised," since 2.6.32 + * this is also needed to prevent use-after-free of the + * device private data. + */ + memset(&icd->dev, 0, sizeof(icd->dev)); } } -- GitLab From e0a7e8a621666f9ce1373270bae061f92a2a2b87 Mon Sep 17 00:00:00 2001 From: HIRANO Takahito Date: Sun, 20 Sep 2009 08:57:49 -0300 Subject: [PATCH 0652/1165] V4L/DVB (13167): pt1: Fix a compile error on arm The lack of #include caused a compile error on some architectures. Signed-off-by: HIRANO Takahito Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/pt1/pt1.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c index 81e623a90f0..1fd8306371e 100644 --- a/drivers/media/dvb/pt1/pt1.c +++ b/drivers/media/dvb/pt1/pt1.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "dvbdev.h" #include "dvb_demux.h" -- GitLab From 66349b4e7ab3825dbfc167a5f0309792a587adb7 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 21 Sep 2009 12:09:08 -0300 Subject: [PATCH 0653/1165] V4L/DVB (13169): bttv: Fix potential out-of-order field processing There is a subtle interaction in the bttv driver which can result in fields being repeatedly processed out of order. This is a problem specifically when running in V4L2_FIELD_ALTERNATE mode (probably the most common case). 1. The determination of which fields are associated with which buffers happens in videobuf, before the bttv driver gets a chance to queue the corresponding DMA. Thus by the point when the DMA is queued for a given buffer, the algorithm has to do the queuing based on the buffer's already assigned field type - not based on which field is "next" in the video stream. 2. The driver normally tries to queue both the top and bottom fields at the same time (see bttv_irq_next_video()). It tries to sort out top vs bottom by looking at the field type for the next 2 available buffers and assigning them appropriately. 3. However the bttv driver *always* actually processes the top field first. There's even an interrupt set aside for specifically recognizing when the top field has been processed so that it can be marked done even while the bottom field is still being DMAed. Given all of the above, if one gets into a situation where bttv_irq_next_video() gets entered when the first available buffer has been pre-associated as a bottom field, then the function is going to process the buffers out of order. That first available buffer will be put into the bottom field slot and the buffer after that will be put into the top field slot. Problem is, since the top field is always processed first by the driver, then that second buffer (the one after the first available buffer) will be the first one to be finished. Because of the strict fifo handling of all video buffers, then that top field won't be seen by the app until after the bottom field is also processed. Worse still, the app will get back the chronologically later bottom field first, *before* the top field is received. The buffer's timestamps will even be backwards. While not fatal to most TV apps, this behavior can subtlely degrade userspace deinterlacing (probably will cause jitter). That's probably why it has gone unnoticed. But it will also cause serious problems if the app in question discards all but the latest received buffer (a latency minimizing tactic) - causing one field to only ever be displayed since the other is now always late. Unfortunately once you get into this state, you're stuck this way - because having consumed two buffers, now the next time around the "first" available buffer will again be a bottom field and the same thing happens. How can we get into this state? In a perfect world, where there's always a few free buffers queued to the driver, it should be impossible. However if something disrupts streaming, e.g. if the userspace app can't queue free buffers fast enough for a moment due perhaps to a CPU scheduling glitch, then the driver can get momentarily starved and some number of fields will be dropped. That's OK. But if an odd number of fields get dropped, then that "first" available buffer might be the bottom field and now we're stuck... This patch fixes that problem by deliberately only setting up a single field for one frame if we don't get a top field as the first available buffer. By purposely skipping the other field, then we only handle a single buffer thus bringing things back into proper sync (i.e. top field first) for the next frame. To do this we just drop the few lines in bttv_irq_next_video() that attempt to set up the second buffer when that second buffer isn't for the bottom field. This is definitely a problem in when in V4L2_FIELD_ALTERNATE mode. In the other modes this change either has no effect or doesn't harm things any further anyway. Signed-off-by: Mike Isely CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 31 +++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 939d1e51297..3ff84c8185a 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3800,11 +3800,34 @@ bttv_irq_next_video(struct bttv *btv, struct bttv_buffer_set *set) if (!V4L2_FIELD_HAS_BOTH(item->vb.field) && (item->vb.queue.next != &btv->capture)) { item = list_entry(item->vb.queue.next, struct bttv_buffer, vb.queue); + /* Mike Isely - Only check + * and set up the bottom field in the logic + * below. Don't ever do the top field. This + * of course means that if we set up the + * bottom field in the above code that we'll + * actually skip a field. But that's OK. + * Having processed only a single buffer this + * time, then the next time around the first + * available buffer should be for a top field. + * That will then cause us here to set up a + * top then a bottom field in the normal way. + * The alternative to this understanding is + * that we set up the second available buffer + * as a top field, but that's out of order + * since this driver always processes the top + * field first - the effect will be the two + * buffers being returned in the wrong order, + * with the second buffer also being delayed + * by one field time (owing to the fifo nature + * of videobuf). Worse still, we'll be stuck + * doing fields out of order now every time + * until something else causes a field to be + * dropped. By effectively forcing a field to + * drop this way then we always get back into + * sync within a single frame time. (Out of + * order fields can screw up deinterlacing + * algorithms.) */ if (!V4L2_FIELD_HAS_BOTH(item->vb.field)) { - if (NULL == set->top && - V4L2_FIELD_TOP == item->vb.field) { - set->top = item; - } if (NULL == set->bottom && V4L2_FIELD_BOTTOM == item->vb.field) { set->bottom = item; -- GitLab From 2de26c0a4a218a351bb1970eeaddf2905b47ff13 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 21 Sep 2009 12:42:22 -0300 Subject: [PATCH 0654/1165] V4L/DVB (13170): bttv: Fix reversed polarity error when switching video standard The bttv driver function which handles switching of the video standard (set_tvnorm() in bttv-driver.c) includes a check which can optionally also reset the cropping configuration to a default value. It is "optional" based on a comparison of the cropcap parameters of the previous vs the newly requested video standard. The comparison is being done with a memcmp(), a function which only returns a true value if the comparison actually fails. This if-statement appears to have been written to assume wrong memcmp() semantics. That is, it was re-initializing the cropping configuration only if the new video standard did NOT have different cropcap values. That doesn't make any sense. One definitely should reset things if the cropcap parameters are different - if there's any comparison to made at all. The effect of this problem was that a transition from, say, PAL to NTSC would leave in place old cropping setup that made sense for the PAL geometry but not for NTSC. If the application doesn't care about cropping it also won't try to reset the cropping configuration, resulting in an improperly cropped video frame. In the case I was testing this actually caused black video frames to be displayed. Another interesting effect of this bug is that if one does something which does NOT change the video standard and this function is run, then the cropping setup gets reset anyway - again because of the backwards comparison. It turns out that just running anything which merely opens and closes the video device node (e.g. v4l-info) will cause this to happen. One can argue that simply opening the device node and not doing anything to it should not mess with any of its state - but because of this behavior, any TV app which does such things (e.g. xawtv) probably therefore doesn't see the problem. The solution is to fix the sense of the if-statement. It's easy to see how this mistake could have been made given how memcmp() works. The patch is therefore removal of a single "!" character from the if-statement in set_tvnorm in bttv-driver.c. Signed-off-by: Mike Isely CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 3ff84c8185a..a6724019c66 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1299,7 +1299,7 @@ set_tvnorm(struct bttv *btv, unsigned int norm) tvnorm = &bttv_tvnorms[norm]; - if (!memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, + if (memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, sizeof (tvnorm->cropcap))) { bttv_crop_reset(&btv->crop[0], norm); btv->crop[1] = btv->crop[0]; /* current = default */ -- GitLab From 96fbf771d86a90ff006bc62ca4d4de6474b3de31 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 15 Oct 2009 01:14:34 -0300 Subject: [PATCH 0655/1165] V4L/DVB (13190): em28xx: fix panic that can occur when starting audio streaming Because the counters were not reset when starting up streaming, they would be reused from the previous run. This can result in cases such that when the second instance of streaming starts up, the "cnt" variable in em28xx_audio_isocirq() can end up being negative, resulting in attempting to write to memory before the start of runtime->dma_area (as well as having a negative number of bytes to copy). Signed-off-by: Devin Heitmueller CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 7bd8a70f0a0..ac947aecb9c 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -383,6 +383,11 @@ static int snd_em28xx_hw_capture_free(struct snd_pcm_substream *substream) static int snd_em28xx_prepare(struct snd_pcm_substream *substream) { + struct em28xx *dev = snd_pcm_substream_chip(substream); + + dev->adev.hwptr_done_capture = 0; + dev->adev.capture_transfer_done = 0; + return 0; } -- GitLab From 78c948ab0cc44f9c8ae397d7d9d217bb498bfa2f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 21 Oct 2009 18:27:29 -0300 Subject: [PATCH 0656/1165] V4L/DVB (13202): smsusb: add autodetection support for three additional Hauppauge USB IDs Add support for three new Hauppauge Device USB IDs: 2040:b900 2040:b910 2040:c000 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/smsusb.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c index cb8a358b731..8f88a586b0d 100644 --- a/drivers/media/dvb/siano/smsusb.c +++ b/drivers/media/dvb/siano/smsusb.c @@ -529,6 +529,12 @@ struct usb_device_id smsusb_id_table[] = { .driver_info = SMS1XXX_BOARD_SIANO_NICE }, { USB_DEVICE(0x187f, 0x0301), .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, + { USB_DEVICE(0x2040, 0xb900), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0xb910), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0xc000), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { } /* Terminating entry */ }; -- GitLab From 1f95725755ab67f3198df3b5bf7517f926f310ca Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Wed, 23 Sep 2009 18:06:57 -0300 Subject: [PATCH 0657/1165] V4L/DVB (13230): s2255drv: Don't conditionalize video buffer completion on waiting processes The s2255 driver had logic which aborted processing of a video frame if there was no process waiting on the video buffer in question. That simply doesn't work when the application is doing things in an asynchronous manner. If the application went to the trouble to queue the buffer in the first place, then the driver should always attempt to complete it - even if the application at that moment has its attention turned elsewhere. Applications which always blocked waiting for I/O on the capture device would not have been affected by this. Applications which *mostly* blocked waiting for I/O on the capture device probably only would have been somewhat affected (frame lossage, at a rate which goes up as the application blocks less). Applications which never blocked on the capture device (e.g. polling only) however would never have been able to receive any video frames, since in that case this "is anyone waiting on this?" check on the buffer never would have evalutated true. This patch just deletes that harmful check against the buffer's wait queue. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab CC: stable@kernel.org --- drivers/media/video/s2255drv.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 9e3262c0ba3..2c0bb06cab3 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -598,11 +598,6 @@ static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize) buf = list_entry(dma_q->active.next, struct s2255_buffer, vb.queue); - if (!waitqueue_active(&buf->vb.done)) { - /* no one active */ - rc = -1; - goto unlock; - } list_del(&buf->vb.queue); do_gettimeofday(&buf->vb.ts); dprintk(100, "[%p/%d] wakeup\n", buf, buf->vb.i); -- GitLab From c94115ffc4d76089b26eee4d1cb56f1f6b631bd2 Mon Sep 17 00:00:00 2001 From: Henrik Kurelid Date: Sat, 3 Oct 2009 05:37:58 -0300 Subject: [PATCH 0658/1165] V4L/DVB (13237): firedtv: length field corrupt in ca2host if length>127 This solves a problem in firedtv that has become major for Swedish DVB-T users the last month or so. It will most likely solve issues seen by other users as well. If the length of an AVC message is greater than 127, the length field should be encoded in LV mode instead of V mode. V mode can only be used if the length is 127 or less. This patch ensures that the CA_PMT message is always encoded in LV mode so PMT message of greater lengths can be supported. Signed-off-by: Henrik Kurelid Signed-off-by: Stefan Richter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/firewire/firedtv-avc.c | 38 +++++++++++++----------- 1 file changed, 20 insertions(+), 18 deletions(-) diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c index d1b67fe0f01..485d061319a 100644 --- a/drivers/media/dvb/firewire/firedtv-avc.c +++ b/drivers/media/dvb/firewire/firedtv-avc.c @@ -1050,28 +1050,28 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) c->operand[4] = 0; /* slot */ c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */ c->operand[6] = 0; /* more/last */ - /* c->operand[7] = XXXprogram_info_length + 17; */ /* length */ - c->operand[8] = list_management; - c->operand[9] = 0x01; /* pmt_cmd=OK_descramble */ + /* Use three bytes for length field in case length > 127 */ + c->operand[10] = list_management; + c->operand[11] = 0x01; /* pmt_cmd=OK_descramble */ /* TS program map table */ - c->operand[10] = 0x02; /* Table id=2 */ - c->operand[11] = 0x80; /* Section syntax + length */ - /* c->operand[12] = XXXprogram_info_length + 12; */ - c->operand[13] = msg[1]; /* Program number */ - c->operand[14] = msg[2]; - c->operand[15] = 0x01; /* Version number=0 + current/next=1 */ - c->operand[16] = 0x00; /* Section number=0 */ - c->operand[17] = 0x00; /* Last section number=0 */ - c->operand[18] = 0x1f; /* PCR_PID=1FFF */ - c->operand[19] = 0xff; - c->operand[20] = (program_info_length >> 8); /* Program info length */ - c->operand[21] = (program_info_length & 0xff); + c->operand[12] = 0x02; /* Table id=2 */ + c->operand[13] = 0x80; /* Section syntax + length */ + /* c->operand[14] = XXXprogram_info_length + 12; */ + c->operand[15] = msg[1]; /* Program number */ + c->operand[16] = msg[2]; + c->operand[17] = 0x01; /* Version number=0 + current/next=1 */ + c->operand[18] = 0x00; /* Section number=0 */ + c->operand[19] = 0x00; /* Last section number=0 */ + c->operand[20] = 0x1f; /* PCR_PID=1FFF */ + c->operand[21] = 0xff; + c->operand[22] = (program_info_length >> 8); /* Program info length */ + c->operand[23] = (program_info_length & 0xff); /* CA descriptors at programme level */ read_pos = 6; - write_pos = 22; + write_pos = 24; if (program_info_length > 0) { pmt_cmd_id = msg[read_pos++]; if (pmt_cmd_id != 1 && pmt_cmd_id != 4) @@ -1113,8 +1113,10 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) c->operand[write_pos++] = 0x00; c->operand[write_pos++] = 0x00; - c->operand[7] = write_pos - 8; - c->operand[12] = write_pos - 13; + c->operand[7] = 0x82; + c->operand[8] = (write_pos - 10) >> 8; + c->operand[9] = (write_pos - 10) & 0xff; + c->operand[14] = write_pos - 15; crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1); c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff; -- GitLab From dcff9cfe432c74b382cea327509ede2e114b1615 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 17 Oct 2009 17:46:25 -0300 Subject: [PATCH 0659/1165] V4L/DVB (13240): firedtv: fix regression: tuning fails due to bogus error return Since 2.6.32(-rc1), DVB core checks the return value of dvb_frontend_ops.set_frontend. Now it becomes apparent that firedtv always returned a bogus value from its set_frontend method. CC: stable@kernel.org Signed-off-by: Stefan Richter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/firewire/firedtv-fe.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/media/dvb/firewire/firedtv-fe.c b/drivers/media/dvb/firewire/firedtv-fe.c index 7ba43630a25..e49cdc88b0c 100644 --- a/drivers/media/dvb/firewire/firedtv-fe.c +++ b/drivers/media/dvb/firewire/firedtv-fe.c @@ -141,18 +141,12 @@ static int fdtv_read_uncorrected_blocks(struct dvb_frontend *fe, u32 *ucblocks) return -EOPNOTSUPP; } -#define ACCEPTED 0x9 - static int fdtv_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct firedtv *fdtv = fe->sec_priv; - /* FIXME: avc_tuner_dsd never returns ACCEPTED. Check status? */ - if (avc_tuner_dsd(fdtv, params) != ACCEPTED) - return -EINVAL; - else - return 0; /* not sure of this... */ + return avc_tuner_dsd(fdtv, params); } static int fdtv_get_frontend(struct dvb_frontend *fe, -- GitLab From b6ef8836c1ff5199abd40cfba162052bc7e8af00 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sun, 27 Sep 2009 10:11:43 -0300 Subject: [PATCH 0660/1165] V4L/DVB (13255): gspca - m5602-s5k4aa: Add vflip quirk for the Bruneinit laptop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds a vflip quirk for the Bruneinit laptop. Thanks to Jörg for the report Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index 59400e85896..f580b614f8b 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -35,6 +35,13 @@ static const struct dmi_system_id s5k4aa_vflip_dmi_table[] = { { + .ident = "BRUNEINIT", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "BRUNENIT"), + DMI_MATCH(DMI_PRODUCT_NAME, "BRUNENIT"), + DMI_MATCH(DMI_BOARD_VERSION, "00030D0000000001") + } + }, { .ident = "Fujitsu-Siemens Amilo Xa 2528", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), -- GitLab From 2339a1887dab469bb4bae56aa7eca3a5e05ecde7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sun, 27 Sep 2009 10:20:21 -0300 Subject: [PATCH 0661/1165] V4L/DVB (13256): gspca - m5602-s5k4aa: Add another MSI GX700 vflip quirk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds another vflip quirk for the MSI GX700. Thanks to John Katzmaier for reporting. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index f580b614f8b..ef4ae684d33 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -59,6 +59,13 @@ static DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 2548") } + }, { + .ident = "MSI GX700", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + DMI_MATCH(DMI_PRODUCT_NAME, "GX700"), + DMI_MATCH(DMI_BIOS_DATE, "12/02/2008") + } }, { .ident = "MSI GX700", .matches = { -- GitLab From 81191f694cb507c49d3c7aa6238dcc0a83ad4001 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sat, 3 Oct 2009 10:01:41 -0300 Subject: [PATCH 0662/1165] V4L/DVB (13257): gspca - m5602-s5k4aa: Add vflip for Fujitsu Amilo Xi 2528 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds a vflip quirk for the Fujitsu Amilo Xi 2528. Thanks to Evgeny for the report. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index ef4ae684d33..a27afeb6f39 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -47,6 +47,12 @@ static DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528") } + }, { + .ident = "Fujitsu-Siemens Amilo Xi 2528", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2528") + } }, { .ident = "Fujitsu-Siemens Amilo Xi 2550", .matches = { -- GitLab From 32345b059676169444d8d3c4a59009adcdf93885 Mon Sep 17 00:00:00 2001 From: Theodore Kilgore Date: Sun, 1 Nov 2009 12:59:42 -0300 Subject: [PATCH 0663/1165] V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 cams gspca_mr97310a: Change vstart for CIF sensor type 1 cams This fixes the distortion at the end of the frame, and avoids the bad frame dropping done because of this distortion, trippling the framerate! Signed-off-by: Theodore Kilgore Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/mr97310a.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c index 140c8f320e4..f8328b9efae 100644 --- a/drivers/media/video/gspca/mr97310a.c +++ b/drivers/media/video/gspca/mr97310a.c @@ -483,7 +483,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev) data[3] = 0x2c; /* reg 2, H size/8 */ data[4] = 0x48; /* reg 3, V size/4 */ data[6] = 0x06; /* reg 5, H start */ - data[8] = 0x06 + sd->sensor_type; /* reg 7, V start */ + data[8] = 0x06 - sd->sensor_type; /* reg 7, V start */ break; } err_code = mr_write(gspca_dev, 11); -- GitLab From d514edac5df2149207f1ae2f52de63882c692eec Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 4 Nov 2009 14:18:04 -0300 Subject: [PATCH 0664/1165] V4L/DVB (13286): pxa-camera: Fix missing sched.h Required for wakeup call. Signed-off-by: Jonathan Cameron Acked-by: Guennadi Liakhovetski Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index aa831d53cf2..51b683c63b7 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include -- GitLab From 7157fbd0ed1a00024fb915cfa5ed93fb4ce9dfaf Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 4 Nov 2009 15:26:59 -0300 Subject: [PATCH 0665/1165] V4L/DVB (13287): ce6230 - saa7164-cmd: Fix wrong sizeof Which is why I have always preferred sizeof(struct foo) over sizeof(var). Cc: Antti Palosaari Acked-by: Steven Toth Signed-off-by: Jean Delvare Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/ce6230.c | 2 +- drivers/media/video/saa7164/saa7164-cmd.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c index 0737c637789..3df2045b7d2 100644 --- a/drivers/media/dvb/dvb-usb/ce6230.c +++ b/drivers/media/dvb/dvb-usb/ce6230.c @@ -105,7 +105,7 @@ static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int i = 0; struct req_t req; int ret = 0; - memset(&req, 0, sizeof(&req)); + memset(&req, 0, sizeof(req)); if (num > 2) return -EINVAL; diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c index c45966edc0c..9c1d3ac4386 100644 --- a/drivers/media/video/saa7164/saa7164-cmd.c +++ b/drivers/media/video/saa7164/saa7164-cmd.c @@ -347,7 +347,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, tmComResCmd_t command, /* Prepare some basic command/response structures */ memset(&command_t, 0, sizeof(command_t)); - memset(&response_t, 0, sizeof(&response_t)); + memset(&response_t, 0, sizeof(response_t)); pcommand_t = &command_t; presponse_t = &response_t; command_t.id = id; -- GitLab From a2e35af6c756b5fa827fec5e0431cf2ce449beef Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 4 Nov 2009 11:09:12 -0300 Subject: [PATCH 0666/1165] V4L/DVB (13309): uvcvideo: Ignore the FIX_BANDWIDTH for compressed video The FIX_BANDWIDTH quirk tries to work around cameras requesting the maximum bandwidth regardless of the image size by computing a bandwidth estimate. This works only for uncompressed frames. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_video.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index f960e8ea4f1..a6e41d12b22 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -90,7 +90,8 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, ctrl->dwMaxVideoFrameSize = frame->dwMaxVideoFrameBufferSize; - if (stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH && + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) && + stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH && stream->intf->num_altsetting > 1) { u32 interval; u32 bandwidth; -- GitLab From 2e8961330ec4b558a0f4db18ab5fb566842f492b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 4 Nov 2009 13:11:10 -0300 Subject: [PATCH 0667/1165] V4L/DVB (13311): uvcvideo: Fix compilation warning with 2.6.32 due to type mismatch with abs() The abs() macro has changed in 2.6.32 and returns a long instead of an int. Fix the driver to avoid compilation warnings. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index c3225a56174..1b89735e62f 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -348,7 +348,7 @@ static void uvc_ctrl_set_zoom(struct uvc_control_mapping *mapping, __s32 value, __u8 *data) { data[0] = value == 0 ? 0 : (value > 0) ? 1 : 0xff; - data[2] = min(abs(value), 0xff); + data[2] = min((int)abs(value), 0xff); } static struct uvc_control_mapping uvc_ctrl_mappings[] = { -- GitLab From 4007a672abd88091e3cced158ec491d41c0c454c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 4 Nov 2009 14:19:35 -0300 Subject: [PATCH 0668/1165] V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts input When FORCE_TS_VALID mode is enabled, the saa713x will accept MPEG TS input without requiring TS_VALID set high. This is required for some new boards to function properly, due to the hardware design implementation. The configuration is toggled within the board setup configuration. Boards that do not have this bit set will function as before with no change. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-ts.c | 6 ++++-- drivers/media/video/saa7134/saa7134.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index 3fa652279ac..03488ba4c99 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -262,11 +262,13 @@ int saa7134_ts_start(struct saa7134_dev *dev) switch (saa7134_boards[dev->board].ts_type) { case SAA7134_MPEG_TS_PARALLEL: saa_writeb(SAA7134_TS_SERIAL0, 0x40); - saa_writeb(SAA7134_TS_PARALLEL, 0xec); + saa_writeb(SAA7134_TS_PARALLEL, 0xec | + (saa7134_boards[dev->board].ts_force_val << 4)); break; case SAA7134_MPEG_TS_SERIAL: saa_writeb(SAA7134_TS_SERIAL0, 0xd8); - saa_writeb(SAA7134_TS_PARALLEL, 0x6c); + saa_writeb(SAA7134_TS_PARALLEL, 0x6c | + (saa7134_boards[dev->board].ts_force_val << 4)); saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc); saa_writeb(SAA7134_TS_SERIAL1, 0x02); break; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 6ee3e9b7769..f8697d46ff5 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -360,6 +360,7 @@ struct saa7134_board { enum saa7134_mpeg_type mpeg; enum saa7134_mpeg_ts_type ts_type; unsigned int vid_port_opts; + unsigned int ts_force_val:1; }; #define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name) -- GitLab From 22370ef5035f206283505409c9a64a595c5c7320 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 4 Nov 2009 14:23:57 -0300 Subject: [PATCH 0669/1165] V4L/DVB (13314): saa7134: set ts_force_val for the Hauppauge WinTV HVR-1150 The Hauppauge WinTV HVR-1150 retail boards require the FORCE_TS_VALID bit to be set in order to function properly. This change will work on the early revisions on the board as well, but the final revision will not function without this change. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 71145bff94f..09013229d4a 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3428,6 +3428,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_config = 3, .mpeg = SAA7134_MPEG_DVB, .ts_type = SAA7134_MPEG_TS_SERIAL, + .ts_force_val = 1, .gpiomask = 0x0800100, /* GPIO 21 is an INPUT */ .inputs = {{ .name = name_tv, -- GitLab From e7e7e0c084ef862d5754701108d4a038514d6314 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Sat, 7 Nov 2009 11:16:13 +0800 Subject: [PATCH 0670/1165] genirq: try_one_irq() must be called with irq disabled Prarit reported: ================================= [ INFO: inconsistent lock state ] 2.6.32-rc5 #1 --------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&irq_desc_lock_class){?.-...}, at: [] try_one_irq+0x32/0x138 {IN-HARDIRQ-W} state was registered at: [] __lock_acquire+0x2fc/0xd5d [] lock_acquire+0xf3/0x12d [] _spin_lock+0x40/0x89 [] handle_level_irq+0x30/0x105 [] handle_irq+0x95/0xb7 [] do_IRQ+0x6a/0xe0 [] ret_from_intr+0x0/0x16 irq event stamp: 195096 hardirqs last enabled at (195096): [] _spin_unlock_irq+0x3a/0x5c hardirqs last disabled at (195095): [] _spin_lock_irq+0x29/0x95 softirqs last enabled at (195088): [] __do_softirq+0x1c1/0x1ef softirqs last disabled at (195093): [] call_softirq+0x1c/0x30 other info that might help us debug this: 1 lock held by swapper/0: #0: (kernel/irq/spurious.c:21){+.-...}, at: [] run_timer_softirq+0x1a9/0x315 stack backtrace: Pid: 0, comm: swapper Not tainted 2.6.32-rc5 #1 Call Trace: [] valid_state+0x187/0x1ae [] mark_lock+0x129/0x253 [] __lock_acquire+0x370/0xd5d [] lock_acquire+0xf3/0x12d [] _spin_lock+0x40/0x89 [] try_one_irq+0x32/0x138 [] poll_all_shared_irqs+0x41/0x6d [] poll_spurious_irqs+0x1c/0x49 [] run_timer_softirq+0x239/0x315 [] __do_softirq+0x102/0x1ef [] call_softirq+0x1c/0x30 [] do_softirq+0x59/0xca [] irq_exit+0x58/0xae [] smp_apic_timer_interrupt+0x94/0xba [] apic_timer_interrupt+0x13/0x20 The reason is that try_one_irq() is called from hardirq context with interrupts disabled and from softirq context (poll_all_shared_irqs()) with interrupts enabled. Disable interrupts before calling it from poll_all_shared_irqs(). Reported-and-tested-by: Prarit Bhargava Signed-off-by: Yong Zhang LKML-Reference: <1257563773-4620-1-git-send-email-yong.zhang0@gmail.com> Signed-off-by: Thomas Gleixner --- kernel/irq/spurious.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c index 114e704760f..bd7273e6282 100644 --- a/kernel/irq/spurious.c +++ b/kernel/irq/spurious.c @@ -121,7 +121,9 @@ static void poll_all_shared_irqs(void) if (!(status & IRQ_SPURIOUS_DISABLED)) continue; + local_irq_disable(); try_one_irq(i, desc); + local_irq_enable(); } } -- GitLab From 35f029e2514be209eb0e88c7d927f3bcc42a5cc2 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 7 Nov 2009 14:49:18 +0100 Subject: [PATCH 0671/1165] [ARM] kirkwood: fix PCI I/O port assignment Instead of allocating PCI devices I/O port bus addresses from the 000xxxxx I/O port range as intended, due to a bus versus physical address mixup, the Kirkwood PCIe handling code inadvertently allocated I/O port bus addresses from the f20xxxxx address range (which is the physical address range of the PCIe I/O mapping window), but then direct all I/O port accesses to bus addresses 000xxxxx, which would then not be decoded at all. Fix this by setting the base address of the PCIe I/O space struct resource to KIRKWOOD_PCIE_IO_BUS_BASE instead of the incorrect KIRKWOOD_PCIE_IO_PHYS_BASE, and fix up __io() to expect addresses offsetted by the former instead of the latter. (The suggested fix of directing I/O port accesses from the host to bus addresses f20xxxxx instead has the problem that assigning full 32bit I/O port bus addresses (f20xxxxx) doesn't work on all PCI devices, as not all PCI devices implement full 32 bit BAR registers for I/O ports. We should really try to allocate I/O port bus addresses that fit in 16 bits.) Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/include/mach/io.h | 2 +- arch/arm/mach-kirkwood/pcie.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h index a643a846d5f..44e8be04f25 100644 --- a/arch/arm/mach-kirkwood/include/mach/io.h +++ b/arch/arm/mach-kirkwood/include/mach/io.h @@ -15,7 +15,7 @@ static inline void __iomem *__io(unsigned long addr) { - return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE) + return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_BUS_BASE) + KIRKWOOD_PCIE_IO_VIRT_BASE); } diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 55388203300..0660e78641e 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -115,7 +115,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) */ res[0].name = "PCIe I/O Space"; res[0].flags = IORESOURCE_IO; - res[0].start = KIRKWOOD_PCIE_IO_PHYS_BASE; + res[0].start = KIRKWOOD_PCIE_IO_BUS_BASE; res[0].end = res[0].start + KIRKWOOD_PCIE_IO_SIZE - 1; if (request_resource(&ioport_resource, &res[0])) panic("Request PCIe IO resource failed\n"); -- GitLab From a1897fa67cb964cc6b5a9048a31eb6ef3dcc2dda Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sat, 7 Nov 2009 14:50:00 +0100 Subject: [PATCH 0672/1165] [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/addr-map.c | 2 +- arch/arm/mach-kirkwood/include/mach/kirkwood.h | 1 + arch/arm/mach-kirkwood/pcie.c | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c index 1da5d1c18ec..2e69168fc69 100644 --- a/arch/arm/mach-kirkwood/addr-map.c +++ b/arch/arm/mach-kirkwood/addr-map.c @@ -105,7 +105,7 @@ void __init kirkwood_setup_cpu_mbus(void) setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE, TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE); setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE, - TARGET_PCIE, ATTR_PCIE_MEM, -1); + TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE); /* * Setup window for NAND controller. diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index 54c132731d2..a15cf0ee22b 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -43,6 +43,7 @@ #define KIRKWOOD_REGS_SIZE SZ_1M #define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000 +#define KIRKWOOD_PCIE_MEM_BUS_BASE 0xe0000000 #define KIRKWOOD_PCIE_MEM_SIZE SZ_128M /* diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 0660e78641e..a604b2a701a 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -126,7 +126,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) */ res[1].name = "PCIe Memory Space"; res[1].flags = IORESOURCE_MEM; - res[1].start = KIRKWOOD_PCIE_MEM_PHYS_BASE; + res[1].start = KIRKWOOD_PCIE_MEM_BUS_BASE; res[1].end = res[1].start + KIRKWOOD_PCIE_MEM_SIZE - 1; if (request_resource(&iomem_resource, &res[1])) panic("Request PCIe Memory resource failed\n"); -- GitLab From ffbfe093b660ce1c9ede569ebe4f969f9003aa59 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 7 Nov 2009 20:36:02 -0500 Subject: [PATCH 0673/1165] [ARM] Kirkwood: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/kirkwood_defconfig | 260 ++++++++++++++++++---------- 1 file changed, 169 insertions(+), 91 deletions(-) diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index af74cc2de8b..bcfade33bca 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc4 -# Mon May 4 11:58:57 2009 +# Linux kernel version: 2.6.32-rc6 +# Sat Nov 7 20:31:18 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=19 # CONFIG_GROUP_SCHED is not set @@ -73,7 +71,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -86,6 +83,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y @@ -95,13 +96,17 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -114,7 +119,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -135,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -156,25 +164,27 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set CONFIG_ARCH_KIRKWOOD=y -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set # CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set # # Marvell Kirkwood Implementations @@ -185,6 +195,7 @@ CONFIG_MACH_RD88F6281=y CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_TS219=y +CONFIG_MACH_OPENRD_BASE=y CONFIG_PLAT_ORION=y # @@ -195,7 +206,7 @@ CONFIG_CPU_FEROCEON=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_FEROCEON=y CONFIG_CPU_TLB_FEROCEON=y @@ -211,6 +222,7 @@ CONFIG_ARM_THUMB=y CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 # # Bus support @@ -235,11 +247,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -254,10 +267,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y +CONFIG_UACCESS_WITH_MEMCPY=y # # Boot options @@ -345,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -367,6 +383,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -383,17 +400,18 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y # CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y - -# -# Rate control algorithm selection -# CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -414,6 +432,7 @@ CONFIG_MAC80211_RC_DEFAULT="minstrel" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -425,9 +444,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -494,6 +513,7 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DATAFLASH is not set CONFIG_MTD_M25P80=y CONFIG_M25PXX_USE_FAST_READ=y +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -543,6 +563,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -567,10 +588,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -587,6 +604,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -595,6 +614,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -611,7 +631,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -623,11 +642,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y # CONFIG_SATA_SIL24 is not set @@ -649,6 +671,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -676,6 +699,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -693,13 +717,16 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -768,6 +795,9 @@ CONFIG_NET_PCI=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -789,6 +819,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -797,10 +828,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y @@ -820,9 +848,7 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_MAC80211_HWSIM is not set # CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set -# CONFIG_ATH5K is not set -# CONFIG_ATH9K is not set -# CONFIG_AR9170_USB is not set +# CONFIG_ATH_COMMON is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_IWLWIFI is not set @@ -832,6 +858,8 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set # CONFIG_HERMES is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -855,6 +883,7 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -878,13 +907,19 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -943,6 +978,7 @@ CONFIG_LEGACY_PTY_COUNT=16 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -998,10 +1034,6 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set @@ -1023,11 +1055,47 @@ CONFIG_SPI_ORION=y # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1041,33 +1109,28 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +CONFIG_VGA_ARB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1087,7 +1150,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1106,10 +1168,12 @@ CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y # CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set @@ -1123,9 +1187,14 @@ CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y # CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y # CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -1150,18 +1219,21 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1252,11 +1324,14 @@ CONFIG_SDIO_UART=y # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set # CONFIG_MMC_TIFM_SD is not set CONFIG_MMC_MVSDIO=y # CONFIG_MMC_SPI is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1266,7 +1341,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_BD2802 is not set @@ -1278,11 +1353,14 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1314,6 +1392,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1325,6 +1404,7 @@ CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -1360,8 +1440,11 @@ CONFIG_DMA_ENGINE=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1379,10 +1462,13 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1455,7 +1541,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1530,6 +1615,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1547,6 +1633,7 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1567,12 +1654,14 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set @@ -1581,25 +1670,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1623,7 +1699,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -1665,11 +1740,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1714,6 +1791,7 @@ CONFIG_CRYPTO_ARC4=y # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_MV_CESA=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_BINARY_PRINTF=y -- GitLab From 3293576c6b7104cdac9c2d10d35abd86b02d7264 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 7 Nov 2009 20:59:20 -0500 Subject: [PATCH 0674/1165] [ARM] orion5x: update defconfig Signed-off-by: Nicolas Pitre --- arch/arm/configs/orion5x_defconfig | 278 ++++++++++++++++++----------- 1 file changed, 176 insertions(+), 102 deletions(-) diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 9e2385293ec..5383cd0dff5 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,15 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc4 -# Mon May 4 14:07:25 2009 +# Linux kernel version: 2.6.32-rc6 +# Sat Nov 7 20:52:21 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,13 +16,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -46,11 +43,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_GROUP_SCHED is not set @@ -69,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -82,6 +79,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set @@ -91,13 +92,17 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -# CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y @@ -109,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -130,19 +135,22 @@ CONFIG_DEFAULT_IOSCHED="cfq" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -151,25 +159,27 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set -# CONFIG_ARCH_MXC is not set CONFIG_ARCH_ORION5X=y +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_MSM is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM is not set -# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_BCMRING is not set # # Orion Implementations @@ -187,6 +197,9 @@ CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y CONFIG_MACH_EDMINI_V2=y +CONFIG_MACH_D2NET=y +CONFIG_MACH_BIGDISK=y +CONFIG_MACH_NET2BIG=y CONFIG_MACH_MSS2=y CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y @@ -202,7 +215,7 @@ CONFIG_CPU_FEROCEON=y CONFIG_CPU_FEROCEON_OLD_ID=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_FEROCEON=y CONFIG_CPU_TLB_FEROCEON=y @@ -215,7 +228,7 @@ CONFIG_CPU_CP15_MMU=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 # # Bus support @@ -240,11 +253,12 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -259,12 +273,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y CONFIG_HAVE_MLOCK=y CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y +CONFIG_UACCESS_WITH_MEMCPY=y # # Boot options @@ -308,6 +324,7 @@ CONFIG_PM=y # CONFIG_PM_DEBUG is not set # CONFIG_SUSPEND is not set # CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -356,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -378,6 +396,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -394,11 +413,15 @@ CONFIG_NET_PKTGEN=m # CONFIG_AF_RXRPC is not set CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -411,6 +434,7 @@ CONFIG_WIRELESS_EXT_SYSFS=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -422,9 +446,9 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -537,6 +561,7 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set @@ -552,7 +577,9 @@ CONFIG_MISC_DEVICES=y # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -576,10 +603,6 @@ CONFIG_BLK_DEV_SR=m # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=m # CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set @@ -596,6 +619,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -604,6 +629,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set @@ -620,7 +646,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -632,11 +657,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set @@ -658,6 +686,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -685,6 +714,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -703,13 +733,16 @@ CONFIG_SATA_MV=y # # -# Enable only one of the two stacks, unless you know what you are doing +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -777,6 +810,8 @@ CONFIG_NET_PCI=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set @@ -798,6 +833,7 @@ CONFIG_NETDEV_1000=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set @@ -806,10 +842,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# +CONFIG_WLAN=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set @@ -835,6 +868,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -855,13 +889,19 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -912,6 +952,7 @@ CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -967,20 +1008,55 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set + +# +# SPI GPIO expanders: +# + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -1030,6 +1106,8 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1041,9 +1119,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -1057,33 +1133,26 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_PCF50633 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +# CONFIG_VGA_ARB is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -1097,7 +1166,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # @@ -1116,10 +1184,11 @@ CONFIG_USB_HID=y # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_CYPRESS is not set -# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_KYE is not set # CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MICROSOFT is not set @@ -1130,10 +1199,11 @@ CONFIG_USB_HID=y # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SUNPLUS is not set -# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TOPSEED is not set -# CONFIG_THRUSTMASTER_FF is not set -# CONFIG_ZEROPLUS_FF is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1160,18 +1230,21 @@ CONFIG_USB_DEVICE_CLASS=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_WHCI_HCD is not set # CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers @@ -1248,7 +1321,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1258,7 +1330,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y -# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set @@ -1269,11 +1341,14 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1306,6 +1381,7 @@ CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1344,8 +1420,11 @@ CONFIG_DMA_ENGINE=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -1358,10 +1437,10 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -# CONFIG_EXT4DEV_COMPAT is not set CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=m @@ -1370,10 +1449,13 @@ CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1446,7 +1528,6 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1537,6 +1618,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -1552,6 +1634,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1572,6 +1655,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set @@ -1579,6 +1663,7 @@ CONFIG_FRAME_POINTER=y # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y @@ -1587,25 +1672,12 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y @@ -1629,20 +1701,19 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_ALGAPI2=m -CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_BLKCIPHER2=m -CONFIG_CRYPTO_HASH2=m -CONFIG_CRYPTO_RNG2=m -CONFIG_CRYPTO_PCOMP=m +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_MANAGER2=m +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set -CONFIG_CRYPTO_WORKQUEUE=m +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1670,11 +1741,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -1691,7 +1764,7 @@ CONFIG_CRYPTO_PCBC=m # # Ciphers # -# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -1719,6 +1792,7 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_MV_CESA=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_BINARY_PRINTF=y -- GitLab From f37325a956f0ee4356793da7d93c699a25b21d92 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:13:39 +0000 Subject: [PATCH 0675/1165] ALSA: snd-aica: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Signed-off-by: Takashi Iwai --- sound/sh/aica.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/sh/aica.c b/sound/sh/aica.c index 583a3693df7..a0df401ebb9 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -49,6 +49,7 @@ MODULE_AUTHOR("Adrian McMenamin "); MODULE_DESCRIPTION("Dreamcast AICA sound (pcm) driver"); MODULE_LICENSE("GPL"); MODULE_SUPPORTED_DEVICE("{{Yamaha/SEGA, AICA}}"); +MODULE_FIRMWARE("aica_firmware.bin"); /* module parameters */ #define CARD_NAME "AICA" -- GitLab From 88b938e63e68fd35e603421f722be0f35dde1016 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 8 Nov 2009 00:26:56 -0800 Subject: [PATCH 0676/1165] sparc64: replace parentheses in pmul() `>>' has a higher precedence than `?' so src2 evaluated to either 16 or 0 dependent on the bits set in rs2. Signed-off-by: Roel Kluin Signed-off-by: David S. Miller --- arch/sparc/kernel/visemul.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/kernel/visemul.c b/arch/sparc/kernel/visemul.c index b956fd71c13..d231cbd5c52 100644 --- a/arch/sparc/kernel/visemul.c +++ b/arch/sparc/kernel/visemul.c @@ -617,7 +617,7 @@ static void pmul(struct pt_regs *regs, unsigned int insn, unsigned int opf) rs2 = fps_regval(f, RS2(insn)); rd_val = 0; - src2 = (rs2 >> (opf == FMUL8x16AU_OPF) ? 16 : 0); + src2 = rs2 >> (opf == FMUL8x16AU_OPF ? 16 : 0); for (byte = 0; byte < 4; byte++) { u16 src1 = (rs1 >> (byte * 8)) & 0x00ff; u32 prod = src1 * src2; -- GitLab From 6755aebaaf9fc5416acfd4578ab7a1e122ecbc74 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 6 Nov 2009 00:23:01 +0000 Subject: [PATCH 0677/1165] can: should not use __dev_get_by_index() without locks bcm_proc_getifname() is called with RTNL and dev_base_lock not held. It calls __dev_get_by_index() without locks, and this is illegal (might crash) Close the race by holding dev_base_lock and copying dev->name in the protected section. Signed-off-by: Eric Dumazet Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- net/can/bcm.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/net/can/bcm.c b/net/can/bcm.c index 597da4f8f88..e8d58f33fe0 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -132,23 +132,27 @@ static inline struct bcm_sock *bcm_sk(const struct sock *sk) /* * procfs functions */ -static char *bcm_proc_getifname(int ifindex) +static char *bcm_proc_getifname(char *result, int ifindex) { struct net_device *dev; if (!ifindex) return "any"; - /* no usage counting */ + read_lock(&dev_base_lock); dev = __dev_get_by_index(&init_net, ifindex); if (dev) - return dev->name; + strcpy(result, dev->name); + else + strcpy(result, "???"); + read_unlock(&dev_base_lock); - return "???"; + return result; } static int bcm_proc_show(struct seq_file *m, void *v) { + char ifname[IFNAMSIZ]; struct sock *sk = (struct sock *)m->private; struct bcm_sock *bo = bcm_sk(sk); struct bcm_op *op; @@ -157,7 +161,7 @@ static int bcm_proc_show(struct seq_file *m, void *v) seq_printf(m, " / sk %p", sk); seq_printf(m, " / bo %p", bo); seq_printf(m, " / dropped %lu", bo->dropped_usr_msgs); - seq_printf(m, " / bound %s", bcm_proc_getifname(bo->ifindex)); + seq_printf(m, " / bound %s", bcm_proc_getifname(ifname, bo->ifindex)); seq_printf(m, " <<<\n"); list_for_each_entry(op, &bo->rx_ops, list) { @@ -169,7 +173,7 @@ static int bcm_proc_show(struct seq_file *m, void *v) continue; seq_printf(m, "rx_op: %03X %-5s ", - op->can_id, bcm_proc_getifname(op->ifindex)); + op->can_id, bcm_proc_getifname(ifname, op->ifindex)); seq_printf(m, "[%d]%c ", op->nframes, (op->flags & RX_CHECK_DLC)?'d':' '); if (op->kt_ival1.tv64) @@ -194,7 +198,8 @@ static int bcm_proc_show(struct seq_file *m, void *v) list_for_each_entry(op, &bo->tx_ops, list) { seq_printf(m, "tx_op: %03X %s [%d] ", - op->can_id, bcm_proc_getifname(op->ifindex), + op->can_id, + bcm_proc_getifname(ifname, op->ifindex), op->nframes); if (op->kt_ival1.tv64) -- GitLab From 53a0ef866dc379e577794819d0b8ade5ba338e3a Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 6 Nov 2009 23:53:13 +0000 Subject: [PATCH 0678/1165] can: fix WARN_ON dump in net/core/rtnetlink.c:rtmsg_ifinfo() On older kernels, e.g. 2.6.27, a WARN_ON dump in rtmsg_ifinfo() is thrown when the CAN device is registered due to insufficient skb space, as reported by various users. This patch adds the rtnl_link_ops "get_size" to fix the problem. I think this patch is required for more recent kernels as well, even if no WARN_ON dumps are triggered. Maybe we also need "get_xstats_size" for the CAN xstats. Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index f0b9a1e1db4..564e31c9fee 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -589,6 +589,22 @@ static int can_changelink(struct net_device *dev, return 0; } +static size_t can_get_size(const struct net_device *dev) +{ + struct can_priv *priv = netdev_priv(dev); + size_t size; + + size = nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */ + size += sizeof(struct can_ctrlmode); /* IFLA_CAN_CTRLMODE */ + size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */ + size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */ + size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */ + if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */ + size += sizeof(struct can_bittiming_const); + + return size; +} + static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); @@ -639,6 +655,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .setup = can_setup, .newlink = can_newlink, .changelink = can_changelink, + .get_size = can_get_size, .fill_info = can_fill_info, .fill_xstats = can_fill_xstats, }; -- GitLab From 2606289779cb297320a185db5997729d29b6700b Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Fri, 6 Nov 2009 08:50:28 +0000 Subject: [PATCH 0679/1165] net/fsl_pq_mdio: add module license GPL or it will taint the kernel and fail to load becuase of_address_to_resource() is GPL only. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller --- drivers/net/fsl_pq_mdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c index 6ac46486697..efbf67689ec 100644 --- a/drivers/net/fsl_pq_mdio.c +++ b/drivers/net/fsl_pq_mdio.c @@ -427,3 +427,4 @@ void fsl_pq_mdio_exit(void) of_unregister_platform_driver(&fsl_pq_mdio_driver); } module_exit(fsl_pq_mdio_exit); +MODULE_LICENSE("GPL"); -- GitLab From 5399dd1fc8f5e812db931225ef5f67d89f3b1a56 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sat, 7 Nov 2009 18:45:16 +0900 Subject: [PATCH 0680/1165] nilfs2: fix kernel oops in error case of nilfs_ioctl_move_blocks This fixes a kernel oops reported by Markus Trippelsdorf in the email titled "[NILFS users] kernel Oops while running nilfs_cleanerd". The oops was caused by a bug of error path in nilfs_ioctl_move_blocks() function, which was inlined in nilfs_ioctl_clean_segments(). nilfs_ioctl_move_blocks checks duplication of blocks which will be moved in garbage collection. But, the check should have be done within nilfs_ioctl_move_inode_block() to prevent list corruption among buffers storing the target blocks. To fix the kernel oops, this moves forward the duplication check before the list insertion. I also tested this for stable trees [2.6.30, 2.6.31]. Reported-by: Markus Trippelsdorf Signed-off-by: Ryusuke Konishi Cc: stable --- fs/nilfs2/ioctl.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 6572ea4bc4d..89dd73ead9a 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -297,7 +297,18 @@ static int nilfs_ioctl_move_inode_block(struct inode *inode, (unsigned long long)vdesc->vd_vblocknr); return ret; } - bh->b_private = vdesc; + if (unlikely(!list_empty(&bh->b_assoc_buffers))) { + printk(KERN_CRIT "%s: conflicting %s buffer: ino=%llu, " + "cno=%llu, offset=%llu, blocknr=%llu, vblocknr=%llu\n", + __func__, vdesc->vd_flags ? "node" : "data", + (unsigned long long)vdesc->vd_ino, + (unsigned long long)vdesc->vd_cno, + (unsigned long long)vdesc->vd_offset, + (unsigned long long)vdesc->vd_blocknr, + (unsigned long long)vdesc->vd_vblocknr); + brelse(bh); + return -EEXIST; + } list_add_tail(&bh->b_assoc_buffers, buffers); return 0; } @@ -335,24 +346,10 @@ static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs, list_for_each_entry_safe(bh, n, &buffers, b_assoc_buffers) { ret = nilfs_gccache_wait_and_mark_dirty(bh); if (unlikely(ret < 0)) { - if (ret == -EEXIST) { - vdesc = bh->b_private; - printk(KERN_CRIT - "%s: conflicting %s buffer: " - "ino=%llu, cno=%llu, offset=%llu, " - "blocknr=%llu, vblocknr=%llu\n", - __func__, - vdesc->vd_flags ? "node" : "data", - (unsigned long long)vdesc->vd_ino, - (unsigned long long)vdesc->vd_cno, - (unsigned long long)vdesc->vd_offset, - (unsigned long long)vdesc->vd_blocknr, - (unsigned long long)vdesc->vd_vblocknr); - } + WARN_ON(ret == -EEXIST); goto failed; } list_del_init(&bh->b_assoc_buffers); - bh->b_private = NULL; brelse(bh); } return nmembs; @@ -360,7 +357,6 @@ static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs, failed: list_for_each_entry_safe(bh, n, &buffers, b_assoc_buffers) { list_del_init(&bh->b_assoc_buffers); - bh->b_private = NULL; brelse(bh); } return ret; -- GitLab From c083234f1592ef3fad3d8083663c5e4a357ec77c Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Sun, 8 Nov 2009 12:09:24 +0900 Subject: [PATCH 0681/1165] nilfs2: fix missing cleanup of gc cache on error cases This fixes an -rc1 regression brought by the commit: 1cf58fa840472ec7df6bf2312885949ebb308853 ("nilfs2: shorten freeze period due to GC in write operation v3"). Although the patch moved out a function call of nilfs_ioctl_move_blocks() to nilfs_ioctl_clean_segments() from nilfs_ioctl_prepare_clean_segments(), it didn't move corresponding cleanup job needed for the error case. This will move the missing cleanup job to the destination function. Signed-off-by: Ryusuke Konishi Acked-by: Jiro SEKIBA --- fs/nilfs2/ioctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 89dd73ead9a..d24057d58f1 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -467,7 +467,6 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs, return 0; failed: - nilfs_remove_all_gcinode(nilfs); printk(KERN_ERR "NILFS: GC failed during preparation: %s: err=%d\n", msg, ret); return ret; @@ -556,6 +555,8 @@ static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp, else ret = nilfs_clean_segments(inode->i_sb, argv, kbufs); + if (ret < 0) + nilfs_remove_all_gcinode(nilfs); clear_nilfs_gc_running(nilfs); out_free: -- GitLab From 968c86458a5975efa7a95f832a4ec9fb21471137 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 6 Nov 2009 15:31:08 -0800 Subject: [PATCH 0682/1165] sched: Fix kernel-doc function parameter name Fix variable name in sched.c kernel-doc notation. Fixes this DocBook warning: Warning(kernel/sched.c:2008): No description found for parameter 'p' Warning(kernel/sched.c:2008): Excess function parameter 'k' description in 'kthread_bind' Signed-off-by: Randy Dunlap LKML-Reference: <4AF4B1BC.8020604@oracle.com> Signed-off-by: Ingo Molnar --- kernel/sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 28dd4f490bf..7d7d5fcca4c 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1994,7 +1994,7 @@ static inline void check_class_changed(struct rq *rq, struct task_struct *p, /** * kthread_bind - bind a just-created kthread to a cpu. - * @k: thread created by kthread_create(). + * @p: thread created by kthread_create(). * @cpu: cpu (might not be online, must be possible) for @k to run on. * * Description: This function is equivalent to set_cpus_allowed(), -- GitLab From de2a47cf2b3f59ef9664b277f4021b91af13598e Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Thu, 5 Nov 2009 10:43:51 +0800 Subject: [PATCH 0683/1165] x86: Fix error return sequence in __ioremap_caller() kernel missed to free memtype if get_vm_area_caller failed in __ioremap_caller. This patch introduces error path to fix this and cleans up the repetitive error return sequences that contributed to the creation of the bug. Signed-off-by: Xiaotian Feng Acked-by: Suresh Siddha Cc: Venkatesh Pallipadi Cc: H. Peter Anvin LKML-Reference: <1257389031-20429-1-git-send-email-dfeng@redhat.com> Signed-off-by: Ingo Molnar --- arch/x86/mm/ioremap.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 334e63ca7b2..2feb9bdedaa 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -170,8 +170,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, (unsigned long long)phys_addr, (unsigned long long)(phys_addr + size), prot_val, new_prot_val); - free_memtype(phys_addr, phys_addr + size); - return NULL; + goto err_free_memtype; } prot_val = new_prot_val; } @@ -197,26 +196,25 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, */ area = get_vm_area_caller(size, VM_IOREMAP, caller); if (!area) - return NULL; + goto err_free_memtype; area->phys_addr = phys_addr; vaddr = (unsigned long) area->addr; - if (kernel_map_sync_memtype(phys_addr, size, prot_val)) { - free_memtype(phys_addr, phys_addr + size); - free_vm_area(area); - return NULL; - } + if (kernel_map_sync_memtype(phys_addr, size, prot_val)) + goto err_free_area; - if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) { - free_memtype(phys_addr, phys_addr + size); - free_vm_area(area); - return NULL; - } + if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) + goto err_free_area; ret_addr = (void __iomem *) (vaddr + offset); mmiotrace_ioremap(unaligned_phys_addr, unaligned_size, ret_addr); return ret_addr; +err_free_area: + free_vm_area(area); +err_free_memtype: + free_memtype(phys_addr, phys_addr + size); + return NULL; } /** -- GitLab From 158bc5af3d49be49c33dc06ff90c4f754c7d4f1b Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Sat, 7 Nov 2009 07:35:06 +0100 Subject: [PATCH 0684/1165] ARM: 5784/1: fix early boot machine ID mismatch error display That code was refactored a long time ago, but one particular label didn't get adjusted properly which broke the listing of supported machines. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/head-common.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 885a7214418..b9505aa267c 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -97,7 +97,7 @@ __error_a: bl printhex8 adr r0, str_a2 bl printascii - adr r3, 3f + adr r3, 4f ldmia r3, {r4, r5, r6} @ get machine desc list sub r4, r3, r4 @ get offset between virt&phys add r5, r5, r4 @ convert virt addresses to -- GitLab From e9036b36eed4d3cdb33fa9cbcdd9888ae516889f Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Mon, 26 Oct 2009 22:24:14 +0300 Subject: [PATCH 0685/1165] sched: Use root_task_group_empty only with FAIR_GROUP_SCHED root_task_group_empty is used only with FAIR_GROUP_SCHED so if we use other scheduler options we get: kernel/sched.c:314: warning: 'root_task_group_empty' defined but not used So move CONFIG_FAIR_GROUP_SCHED up that it covers root_task_group_empty(). Signed-off-by: Cyrill Gorcunov Cc: Peter Zijlstra LKML-Reference: <20091026192414.GB5321@lenovo> Signed-off-by: Ingo Molnar --- kernel/sched.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/sched.c b/kernel/sched.c index 7d7d5fcca4c..3c11ae0a948 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -309,6 +309,8 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(struct rt_rq, init_rt_rq); */ static DEFINE_SPINLOCK(task_group_lock); +#ifdef CONFIG_FAIR_GROUP_SCHED + #ifdef CONFIG_SMP static int root_task_group_empty(void) { @@ -316,7 +318,6 @@ static int root_task_group_empty(void) } #endif -#ifdef CONFIG_FAIR_GROUP_SCHED #ifdef CONFIG_USER_SCHED # define INIT_TASK_GROUP_LOAD (2*NICE_0_LOAD) #else /* !CONFIG_USER_SCHED */ -- GitLab From eb647138acefc897c0eb6eddd5d3650966dfe627 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Sun, 8 Nov 2009 12:12:14 +0100 Subject: [PATCH 0686/1165] x86/PCI: Adjust GFP mask handling for coherent allocations Rather than forcing GFP flags and DMA mask to be inconsistent, GFP flags should be determined even for the fallback device through dma_alloc_coherent_mask()/dma_alloc_coherent_gfp_flags(). This restores 64-bit behavior as it was prior to commits 8965eb19386fdf5ccd0ef8b02593eb8560aa3416 and 4a367f3a9dbf2e7ffcee4702203479809236ee6e (not sure why there are two of them), where GFP_DMA was forced on for 32-bit, but not for 64-bit, with the slight adjustment that afaict even 32-bit doesn't need this without CONFIG_ISA. Signed-off-by: Jan Beulich Acked-by: Takashi Iwai LKML-Reference: <4AF18187020000780001D8AA@vpn.id2.novell.com> Signed-off-by: Ingo Molnar Signed-off-by: Jesse Barnes --- arch/x86/include/asm/dma-mapping.h | 10 +++++++--- arch/x86/kernel/pci-dma.c | 6 ++---- 2 files changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/x86/include/asm/dma-mapping.h b/arch/x86/include/asm/dma-mapping.h index 0ee770d23d0..6a25d5d4283 100644 --- a/arch/x86/include/asm/dma-mapping.h +++ b/arch/x86/include/asm/dma-mapping.h @@ -14,6 +14,12 @@ #include #include +#ifdef CONFIG_ISA +# define ISA_DMA_BIT_MASK DMA_BIT_MASK(24) +#else +# define ISA_DMA_BIT_MASK DMA_BIT_MASK(32) +#endif + extern dma_addr_t bad_dma_address; extern int iommu_merge; extern struct device x86_dma_fallback_dev; @@ -124,10 +130,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dma_alloc_from_coherent(dev, size, dma_handle, &memory)) return memory; - if (!dev) { + if (!dev) dev = &x86_dma_fallback_dev; - gfp |= GFP_DMA; - } if (!is_device_dma_capable(dev)) return NULL; diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index b2a71dca564..a6e804d16c3 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -45,12 +45,10 @@ int iommu_pass_through __read_mostly; dma_addr_t bad_dma_address __read_mostly = 0; EXPORT_SYMBOL(bad_dma_address); -/* Dummy device used for NULL arguments (normally ISA). Better would - be probably a smaller DMA mask, but this is bug-to-bug compatible - to older i386. */ +/* Dummy device used for NULL arguments (normally ISA). */ struct device x86_dma_fallback_dev = { .init_name = "fallback device", - .coherent_dma_mask = DMA_BIT_MASK(32), + .coherent_dma_mask = ISA_DMA_BIT_MASK, .dma_mask = &x86_dma_fallback_dev.coherent_dma_mask, }; EXPORT_SYMBOL(x86_dma_fallback_dev); -- GitLab From c10edee2e1716f8cf217cf52ed01ae4742fcdf3c Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Sun, 8 Nov 2009 18:01:06 +0200 Subject: [PATCH 0687/1165] perf tools: Fix permission checks The perf_event_open() system call returns EACCES if the user is not root which results in a very confusing error message: $ perf record -A -a -f Error: perfcounter syscall returned with -1 (Permission denied) Fatal: No CONFIG_PERF_EVENTS=y kernel support configured? It turns out that's because perf tools are checking only for EPERM. Fix that up to get a much better error message: $ perf record -A -a -f Fatal: Permission error - are you root? Signed-off-by: Pekka Enberg Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Frederic Weisbecker LKML-Reference: <1257696066-4046-1-git-send-email-penberg@cs.helsinki.fi> Signed-off-by: Ingo Molnar --- tools/perf/builtin-record.c | 2 +- tools/perf/builtin-top.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 3eeef339c78..a4be453fc8a 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -426,7 +426,7 @@ try_again: if (fd[nr_cpu][counter] < 0) { int err = errno; - if (err == EPERM) + if (err == EPERM || err == EACCES) die("Permission error - are you root?\n"); else if (err == ENODEV && profile_cpu != -1) die("No such device - did you specify an out-of-range profile CPU?\n"); diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index a1b1d10912d..e23bc74e734 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -1027,7 +1027,7 @@ try_again: if (fd[i][counter] < 0) { int err = errno; - if (err == EPERM) + if (err == EPERM || err == EACCES) die("No permission - are you root?\n"); /* * If it's cycles then fall back to hrtimer -- GitLab From bfd2e29f04e5f048ea62677811d1244badd6661e Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 8 Nov 2009 20:05:28 +0000 Subject: [PATCH 0688/1165] [ARM] Fix test for unimplemented ARM syscalls The existing test always failed since 'no' was always greater than 0x7ff. Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 95718a6b50a..1bbda04a538 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -573,7 +573,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if not implemented, rather than raising SIGILL. This way the calling program can gracefully determine whether a feature is supported. */ - if (no <= 0x7ff) + if ((no & 0xffff) <= 0x7ff) return -ENOSYS; break; } -- GitLab From 1e424a348303694fabdf8b1efbfcb1a892dfa63a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 8 Nov 2009 15:45:44 -0500 Subject: [PATCH 0689/1165] ext4: partial revert to fix double brelse WARNING() This is a partial revert of commit 6487a9d (only the changes made to fs/ext4/namei.c), since it is causing the following brelse() double-free warning when running fsstress on a file system with 1k blocksize and we run into a block allocation failure while converting a single-block directory to a multi-block hash-tree indexed directory. WARNING: at fs/buffer.c:1197 __brelse+0x2e/0x33() Hardware name: VFS: brelse: Trying to free free buffer Modules linked in: Pid: 2226, comm: jbd2/sdd-8 Not tainted 2.6.32-rc6-00577-g0003f55 #101 Call Trace: [] warn_slowpath_common+0x65/0x95 [] warn_slowpath_fmt+0x29/0x2c [] __brelse+0x2e/0x33 [] jbd2_journal_refile_buffer+0x67/0x6c [] jbd2_journal_commit_transaction+0x319/0x14d8 [] ? try_to_del_timer_sync+0x58/0x60 [] ? sched_clock_cpu+0x12a/0x13e [] ? trace_hardirqs_off+0xb/0xd [] ? cpu_clock+0x3f/0x5b [] ? lock_release_holdtime+0x36/0x137 [] ? _spin_unlock_irqrestore+0x44/0x51 [] ? trace_hardirqs_on_caller+0x103/0x124 [] ? trace_hardirqs_on+0xb/0xd [] ? try_to_del_timer_sync+0x58/0x60 [] kjournald2+0x11a/0x310 [] ? autoremove_wake_function+0x0/0x38 [] ? kjournald2+0x0/0x310 [] kthread+0x66/0x6b [] ? kthread+0x0/0x6b [] kernel_thread_helper+0x7/0x10 ---[ end trace 5579351b86af61e3 ]--- Commit 6487a9d was an attempt some buffer head leaks in an ENOSPC error path, but in some cases it actually results in an excess ENOSPC, as shown above. Fixing this means cleaning up who is responsible for releasing the buffer heads from the callee to the caller of add_dirent_to_buf(). Since that's a relatively complex change, and we're late in the rcX development cycle, I'm reverting this now, and holding back a more complete fix until after 2.6.32 ships. We've lived with this buffer_head leak on ENOSPC in ext3 and ext4 for a very long time; a few more months won't kill us. Signed-off-by: "Theodore Ts'o" Cc: Curt Wohlgemuth --- fs/ext4/namei.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 7c8fe80bacd..6d2c1b897fc 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1518,12 +1518,8 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry, return retval; if (blocks == 1 && !dx_fallback && - EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) { - retval = make_indexed_dir(handle, dentry, inode, bh); - if (retval == -ENOSPC) - brelse(bh); - return retval; - } + EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) + return make_indexed_dir(handle, dentry, inode, bh); brelse(bh); } bh = ext4_append(handle, dir, &block, &retval); @@ -1532,10 +1528,7 @@ static int ext4_add_entry(handle_t *handle, struct dentry *dentry, de = (struct ext4_dir_entry_2 *) bh->b_data; de->inode = 0; de->rec_len = ext4_rec_len_to_disk(blocksize, blocksize); - retval = add_dirent_to_buf(handle, dentry, inode, de, bh); - if (retval == -ENOSPC) - brelse(bh); - return retval; + return add_dirent_to_buf(handle, dentry, inode, de, bh); } /* @@ -1664,8 +1657,7 @@ static int ext4_dx_add_entry(handle_t *handle, struct dentry *dentry, if (!de) goto cleanup; err = add_dirent_to_buf(handle, dentry, inode, de, bh); - if (err != -ENOSPC) - bh = NULL; + bh = NULL; goto cleanup; journal_error: -- GitLab From a556bec9955c8e47b40a87dbfeef6f24d3b2228f Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Mon, 9 Nov 2009 08:51:35 +0900 Subject: [PATCH 0690/1165] m32r: fix arch/m32r/boot/compressed/Makefile - Fix a comment string - Fix a typo of $(suffix-y) Signed-off-by: Hirokazu Takata --- arch/m32r/boot/compressed/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index 1003880d0df..177716b1d61 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -1,5 +1,5 @@ # -# linux/arch/sh/boot/compressed/Makefile +# linux/arch/m32r/boot/compressed/Makefile # # create a compressed vmlinux image from the original vmlinux # @@ -47,5 +47,5 @@ suffix_$(CONFIG_KERNEL_GZIP) = gz suffix_$(CONFIG_KERNEL_BZIP2) = bz2 suffix_$(CONFIG_KERNEL_LZMA) = lzma -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE $(call if_changed,ld) -- GitLab From 1c9d80ddc60f8ac26344ec3db9830e5f8016c16d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 8 Nov 2009 17:41:20 -0800 Subject: [PATCH 0691/1165] sparc: Move of_set_property_mutex acquisition outside of devtree_lock grab. Otherwise we try to sleep with preemption disabled, etc. Noticed by Thomas Gleixner. Signed-off-by: David S. Miller --- arch/sparc/kernel/prom_common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index 138910c6720..d80a65d9e89 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -79,6 +79,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len err = -ENODEV; + mutex_lock(&of_set_property_mutex); write_lock(&devtree_lock); prevp = &dp->properties; while (*prevp) { @@ -88,9 +89,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *old_val = prop->value; int ret; - mutex_lock(&of_set_property_mutex); ret = prom_setprop(dp->node, name, val, len); - mutex_unlock(&of_set_property_mutex); err = -EINVAL; if (ret >= 0) { @@ -109,6 +108,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len prevp = &(*prevp)->next; } write_unlock(&devtree_lock); + mutex_unlock(&of_set_property_mutex); /* XXX Upate procfs if necessary... */ -- GitLab From a9d244a2ff163247b607c4bb64803230ca8f8acb Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 5 Nov 2009 23:14:39 +0000 Subject: [PATCH 0692/1165] sh: Account for cache aliases in flush_icache_range() The icache may also contain aliases so we must account for them just like we do when manipulating the dcache. We usually get away with aliases in the icache because the instructions that are read from memory are read-only, i.e. they never change. However, the place where this bites us is when the code has been modified. Signed-off-by: Matt Fleming Signed-off-by: Paul Mundt --- arch/sh/mm/cache-sh4.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 519e2d16cd0..b7f235c74d6 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -72,6 +72,7 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args) for (v = start; v < end; v += L1_CACHE_BYTES) { unsigned long icacheaddr; + int j, n; __ocbwb(v); @@ -79,8 +80,10 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args) cpu_data->icache.entry_mask); /* Clear i-cache line valid-bit */ + n = boot_cpu_data.icache.n_aliases; for (i = 0; i < cpu_data->icache.ways; i++) { - __raw_writel(0, icacheaddr); + for (j = 0; j < n; j++) + __raw_writel(0, icacheaddr + (j * PAGE_SIZE)); icacheaddr += cpu_data->icache.way_incr; } } -- GitLab From 969e46a8533a3e40ce2146f6764a963b1f5505da Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 6 Nov 2009 22:42:05 +0000 Subject: [PATCH 0693/1165] sh: Replace old style lock initializer SPIN_LOCK_UNLOCKED is deprecated. Use __SPIN_LOCK_UNLOCKED instead. Signed-off-by: Thomas Gleixner Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt --- arch/sh/include/asm/rwsem.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h index 1987f3ea7f1..06e2251a5e4 100644 --- a/arch/sh/include/asm/rwsem.h +++ b/arch/sh/include/asm/rwsem.h @@ -41,7 +41,7 @@ struct rw_semaphore { #endif #define __RWSEM_INITIALIZER(name) \ - { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \ LIST_HEAD_INIT((name).wait_list) \ __RWSEM_DEP_MAP_INIT(name) } -- GitLab From d178f27fc5150d680d9df865ea9dfe3269cf00a6 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 9 Nov 2009 15:58:23 +0000 Subject: [PATCH 0694/1165] ksm: cond_resched in unstable tree KSM needs a cond_resched() for CONFIG_PREEMPT_NONE, in its unbounded search of the unstable tree. The stable tree cases already have one, and originally there was one down inside get_user_pages(); but I missed it when I converted to follow_page() instead. Signed-off-by: Hugh Dickins Acked-by: Izik Eidus Signed-off-by: Linus Torvalds --- mm/ksm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/ksm.c b/mm/ksm.c index bef1af4f77e..5575f8628fe 100644 --- a/mm/ksm.c +++ b/mm/ksm.c @@ -1012,6 +1012,7 @@ static struct rmap_item *unstable_tree_search_insert(struct page *page, struct rmap_item *tree_rmap_item; int ret; + cond_resched(); tree_rmap_item = rb_entry(*new, struct rmap_item, node); page2[0] = get_mergeable_page(tree_rmap_item); if (!page2[0]) -- GitLab From 95491d902b4ed1bfd8f602aada793d74cc85428b Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Sun, 8 Nov 2009 19:03:55 -0500 Subject: [PATCH 0695/1165] ALSA: hda: Use model=auto quirk for Sony VAIO VGN-FW170J using ALC262 BugLink: https://bugs.launchpad.net/bugs/478309 The internal microphone on this VAIO model does not work unless the "auto" quirk is used. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ff20048504b..9bb4f75ca43 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11460,6 +11460,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */ SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06), + SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO), SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1", -- GitLab From 86cf898e1d0fca245173980e3897580db38569a8 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 9 Nov 2009 22:15:15 +0000 Subject: [PATCH 0696/1165] intel-iommu: Check for 'DMAR at zero' BIOS error earlier. Chris Wright has some patches which let us fall back to swiotlb nicely if IOMMU initialisation fails. But those are a bit much for 2.6.32. Instead, let's shift the check for the biggest problem, the HP and Acer BIOS bug which reports a DMAR at physical address zero. That one can actually be checked much earlier -- before we even admit to having detected an IOMMU in the first place. So the swiotlb init goes ahead as we want. Signed-off-by: David Woodhouse --- drivers/pci/dmar.c | 49 ++++++++++++++++++++++++++++++++++++---------- 1 file changed, 39 insertions(+), 10 deletions(-) diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 22b02c6df85..e5f8fc164fd 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -175,15 +175,6 @@ dmar_parse_one_drhd(struct acpi_dmar_header *header) int ret = 0; drhd = (struct acpi_dmar_hardware_unit *)header; - if (!drhd->address) { - /* Promote an attitude of violence to a BIOS engineer today */ - WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n" - "BIOS vendor: %s; Ver: %s; Product Version: %s\n", - dmi_get_system_info(DMI_BIOS_VENDOR), - dmi_get_system_info(DMI_BIOS_VERSION), - dmi_get_system_info(DMI_PRODUCT_VERSION)); - return -ENODEV; - } dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL); if (!dmaru) return -ENOMEM; @@ -591,12 +582,50 @@ int __init dmar_table_init(void) return 0; } +int __init check_zero_address(void) +{ + struct acpi_table_dmar *dmar; + struct acpi_dmar_header *entry_header; + struct acpi_dmar_hardware_unit *drhd; + + dmar = (struct acpi_table_dmar *)dmar_tbl; + entry_header = (struct acpi_dmar_header *)(dmar + 1); + + while (((unsigned long)entry_header) < + (((unsigned long)dmar) + dmar_tbl->length)) { + /* Avoid looping forever on bad ACPI tables */ + if (entry_header->length == 0) { + printk(KERN_WARNING PREFIX + "Invalid 0-length structure\n"); + return 0; + } + + if (entry_header->type == ACPI_DMAR_TYPE_HARDWARE_UNIT) { + drhd = (void *)entry_header; + if (!drhd->address) { + /* Promote an attitude of violence to a BIOS engineer today */ + WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n" + "BIOS vendor: %s; Ver: %s; Product Version: %s\n", + dmi_get_system_info(DMI_BIOS_VENDOR), + dmi_get_system_info(DMI_BIOS_VERSION), + dmi_get_system_info(DMI_PRODUCT_VERSION)); + return 0; + } + break; + } + + entry_header = ((void *)entry_header + entry_header->length); + } + return 1; +} + void __init detect_intel_iommu(void) { int ret; ret = dmar_table_detect(); - + if (ret) + ret = check_zero_address(); { #ifdef CONFIG_INTR_REMAP struct acpi_table_dmar *dmar; -- GitLab From 52cb0148ef2401dbffa4daf60588cad27e4f329d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 9 Nov 2009 23:21:19 +0000 Subject: [PATCH 0697/1165] mtd/maps: Fix accidental removal in Makefile The commit d79c326 ("gpio-addr-flash: new driver for GPIO assisted flash addressing") removed two lines from the Makefile by accident. Though I'm not sure how this accident happened, this patch reverts the removal. Signed-off-by: Atsushi Nemoto Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/mtd/maps/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 1d5cf863672..ae2f6dbe43c 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -58,4 +58,6 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o +obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o +obj-$(CONFIG_MTD_VMU) += vmu-flash.o obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o -- GitLab From a3323b72b964471650a6128de4e10f8e88d47ae1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 3 Nov 2009 14:42:04 +0000 Subject: [PATCH 0698/1165] ARM: SMDK6410: Configure GPIO pull up for WM835x IRQ line When used with the WM1190-EV1 board we can use the internal pull up resistor of the CPU to provide the required pull for the IRQ line. Without this interrupts from the WM835x don't work in the default WM1190-EV1 hardwaer configuration. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/mach-smdk6410.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c index ea51dbe76e3..9f1a2146262 100644 --- a/arch/arm/mach-s3c6410/mach-smdk6410.c +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -320,6 +320,9 @@ static int __init smdk6410_wm8350_init(struct wm8350 *wm8350) { int i; + /* Configure the IRQ line */ + s3c_gpio_setpull(S3C64XX_GPN(12), S3C_GPIO_PULL_UP); + /* Instantiate the regulators */ for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++) wm8350_register_regulator(wm8350, -- GitLab From c7a19787195fcc90aabc3a71f29647ba9a443efe Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 3 Nov 2009 14:42:10 +0000 Subject: [PATCH 0699/1165] ARM: SMDK6410: Allocate more GPIO space for WM1190-EV1 The WM835x has some GPIOs on it, allocate some space so we can use them with gpiolib. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6410/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig index 53fc3ff657f..72d4b11b207 100644 --- a/arch/arm/mach-s3c6410/Kconfig +++ b/arch/arm/mach-s3c6410/Kconfig @@ -77,6 +77,7 @@ config SMDK6410_WM1190_EV1 depends on MACH_SMDK6410 select REGULATOR select REGULATOR_WM8350 + select S3C24XX_GPIO_EXTRA64 select MFD_WM8350_I2C select MFD_WM8350_CONFIG_MODE_0 select MFD_WM8350_CONFIG_MODE_3 -- GitLab From 54489cd46a3a268ed981c681726c6d690883f076 Mon Sep 17 00:00:00 2001 From: Maurus Cuelenaere Date: Wed, 4 Nov 2009 13:13:29 +0100 Subject: [PATCH 0700/1165] ARM: S3C64XX: Remove duplicate s3c_dma_has_circular() definition for S3C64xx. This patch removes the duplicated s3c_dma_has_circular() definition and so fixes compilation for S3C64xx. Signed-off-by: Maurus Cuelenaere Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/dma.h | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h index 004edab2395..1067619f0ba 100644 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -68,11 +68,6 @@ static __inline__ int s3c_dma_has_circular(void) #define S3C2410_DMAF_CIRCULAR (1 << 0) -static inline bool s3c_dma_has_circular(void) -{ - return false; -} - #include #endif /* __ASM_ARCH_IRQ_H */ -- GitLab From b3c5496fbfc2e5f64bb85b142615717850fee980 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 9 Nov 2009 23:45:47 +0000 Subject: [PATCH 0701/1165] ARM: S3C64XX: Tidy definition and comments in s3c_dma_has_circular() The recent changes to arch/arm/mach-s3c6400/include/mach/dma.h have left an out of date comment in there as well as accidentally changing the type of the function. Fix the commit 54489cd46a3a268ed981c681726c6d690883f076 Signed-off-by: Ben Dooks --- arch/arm/mach-s3c6400/include/mach/dma.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h index 1067619f0ba..6723860748b 100644 --- a/arch/arm/mach-s3c6400/include/mach/dma.h +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -58,12 +58,9 @@ enum dma_ch { DMACH_MAX /* the end */ }; -static __inline__ int s3c_dma_has_circular(void) +static __inline__ bool s3c_dma_has_circular(void) { - /* we will be supporting ciruclar buffers as soon as we have DMA - * engine support. - */ - return 1; + return true; } #define S3C2410_DMAF_CIRCULAR (1 << 0) -- GitLab From 210012a6cd8770a73d1aa74b742667b462d04511 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:20 +0900 Subject: [PATCH 0702/1165] ARM: S3C64XX: DMA: Protect buffer pointers while manipulation Ensure the DMA buffer points are not updated from another source during the process of enquing a buffer. Signed-off-by: Jassi Brar [ben-linux@fluff.org: Updated patch comment] Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/dma.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 266a10745a8..6fa706f0f42 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -339,6 +339,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, struct s3c64xx_dma_buff *next; struct s3c64xx_dma_buff *buff; struct pl080s_lli *lli; + unsigned long flags; int ret; WARN_ON(!chan); @@ -366,6 +367,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, s3c64xx_dma_fill_lli(chan, lli, data, size); + local_irq_save(flags); + if ((next = chan->next) != NULL) { struct s3c64xx_dma_buff *end = chan->end; struct pl080s_lli *endlli = end->lli; @@ -397,6 +400,8 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id, s3c64xx_lli_to_regs(chan, lli); } + local_irq_restore(flags); + show_lli(lli); dbg_showchan(chan); -- GitLab From 6d0b8627d545aed7d4bcaad2156b6cb95e105715 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:26 +0900 Subject: [PATCH 0703/1165] ARM: S3C64XX: DMA: Unify callback functions for success/failure Replace s3c64xx_dma_tcirq and s3c64xx_dma_errirq with the common s3c64xx_dma_buffdone. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/dma.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-) diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 6fa706f0f42..5a08a86419d 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -565,26 +565,11 @@ int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client) EXPORT_SYMBOL(s3c2410_dma_free); - -static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs) -{ - struct s3c2410_dma_chan *chan = dmac->channels + offs; - - /* note, we currently do not bother to work out which buffer - * or buffers have been completed since the last tc-irq. */ - - if (chan->callback_fn) - (chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK); -} - -static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs) -{ - printk(KERN_DEBUG "%s: offs %d\n", __func__, offs); -} - static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) { struct s3c64xx_dmac *dmac = pw; + struct s3c2410_dma_chan *chan; + enum s3c2410_dma_buffresult res; u32 tcstat, errstat; u32 bit; int offs; @@ -593,15 +578,22 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) errstat = readl(dmac->regs + PL080_ERR_STATUS); for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { + + if (!(errstat & bit) && !(tcstat & bit)) + continue; + + chan = dmac->channels + offs; + res = S3C2410_RES_ERR; + if (tcstat & bit) { writel(bit, dmac->regs + PL080_TC_CLEAR); - s3c64xx_dma_tcirq(dmac, offs); + res = S3C2410_RES_OK; } - if (errstat & bit) { - s3c64xx_dma_errirq(dmac, offs); + if (errstat & bit) writel(bit, dmac->regs + PL080_ERR_CLEAR); - } + + s3c64xx_dma_bufffdone(chan, chan->curr, res); } return IRQ_HANDLED; -- GitLab From 7507f39c57d4a285aea11c379fbc65c2b3f375ef Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:45 +0900 Subject: [PATCH 0704/1165] ARM: S3C64XX: DMA: Make src and dst transfer size same Some devices don't seem to work if the source and desitnation transfer widths are not same. For example, SPI dma xfers, with 8bits/word, don't work without this patch. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/dma.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 5a08a86419d..a94281bb84d 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -151,8 +151,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, src = chan->dev_addr; dst = data; control0 = PL080_CONTROL_SRC_AHB2; - control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; - control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT; control0 |= PL080_CONTROL_DST_INCR; break; @@ -160,8 +158,6 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, src = data; dst = chan->dev_addr; control0 = PL080_CONTROL_DST_AHB2; - control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; - control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT; control0 |= PL080_CONTROL_SRC_INCR; break; default: @@ -173,6 +169,8 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, control1 = size >> chan->hw_width; /* size in no of xfers */ control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */ control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */ + control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT; + control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT; lli->src_addr = src; lli->dst_addr = dst; -- GitLab From 9b08284bf22f438baa2d6b68015ff17ddb431a61 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:33 +0900 Subject: [PATCH 0705/1165] ARM: S3C64XX: DMA: Callback with correct buffer pointer buffdone callback should be called per buffer request with pointer to the latest serviced request. 'next' should point to the one next to currently active. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/dma.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index a94281bb84d..7d12eb8fa58 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -576,6 +576,7 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) errstat = readl(dmac->regs + PL080_ERR_STATUS); for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) { + struct s3c64xx_dma_buff *buff; if (!(errstat & bit) && !(tcstat & bit)) continue; @@ -591,7 +592,33 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) if (errstat & bit) writel(bit, dmac->regs + PL080_ERR_CLEAR); - s3c64xx_dma_bufffdone(chan, chan->curr, res); + /* 'next' points to the buffer that is next to the + * currently active buffer. + * For CIRCULAR queues, 'next' will be same as 'curr' + * when 'end' is the active buffer. + */ + buff = chan->curr; + while (buff && buff != chan->next + && buff->next != chan->next) + buff = buff->next; + + if (!buff) + BUG(); + + if (buff == chan->next) + buff = chan->end; + + s3c64xx_dma_bufffdone(chan, buff, res); + + /* Update 'next' */ + buff = chan->next; + if (chan->next == chan->end) { + chan->next = chan->curr; + if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) + chan->end = NULL; + } else { + chan->next = buff->next; + } } return IRQ_HANDLED; -- GitLab From 336b1a3181d81db85c0af3d0c18fe0a04b4d5126 Mon Sep 17 00:00:00 2001 From: Jassi Brar Date: Thu, 5 Nov 2009 13:44:39 +0900 Subject: [PATCH 0706/1165] ARM: S3C64XX: DMA: Free node for non-circular queues We need to free the buff and lli nodes if the buffer queue is not CIRCULAR. Signed-off-by: Jassi Brar Signed-off-by: Ben Dooks --- arch/arm/plat-s3c64xx/dma.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c index 7d12eb8fa58..d554b936fcf 100644 --- a/arch/arm/plat-s3c64xx/dma.c +++ b/arch/arm/plat-s3c64xx/dma.c @@ -610,6 +610,12 @@ static irqreturn_t s3c64xx_dma_irq(int irq, void *pw) s3c64xx_dma_bufffdone(chan, buff, res); + /* Free the node and update curr, if non-circular queue */ + if (!(chan->flags & S3C2410_DMAF_CIRCULAR)) { + chan->curr = buff->next; + s3c64xx_dma_freebuff(buff); + } + /* Update 'next' */ buff = chan->next; if (chan->next == chan->end) { -- GitLab From 5ebd4c22897dce65845807a9bd3a31cc4e142b53 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Wed, 28 Oct 2009 18:55:36 +0100 Subject: [PATCH 0707/1165] highmem: Fix race in debug_kmap_atomic() which could cause warn_count to underflow debug_kmap_atomic() tries to prevent ever printing more than 10 warnings, but it does so by testing whether an unsigned integer is equal to 0. However, if the warning is caused by a nested IRQ, then this counter may underflow and the stream of warnings will never end. Fix that by using a signed integer instead. Signed-off-by: Soeren Sandmann Pedersen Cc: Linus Torvalds Cc: a.p.zijlstra@chello.nl Cc: # .31.x LKML-Reference: Signed-off-by: Ingo Molnar --- mm/highmem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/highmem.c b/mm/highmem.c index 25878cc49da..33587de6b87 100644 --- a/mm/highmem.c +++ b/mm/highmem.c @@ -426,9 +426,9 @@ void __init page_address_init(void) void debug_kmap_atomic(enum km_type type) { - static unsigned warn_count = 10; + static int warn_count = 10; - if (unlikely(warn_count == 0)) + if (unlikely(warn_count < 0)) return; if (unlikely(in_interrupt())) { -- GitLab From d4515646699b6ad7b1a98ceb871296b957f3ef47 Mon Sep 17 00:00:00 2001 From: Soeren Sandmann Date: Wed, 28 Oct 2009 18:56:35 +0100 Subject: [PATCH 0708/1165] highmem: Fix debug_kmap_atomic() to also handle KM_IRQ_PTE, KM_NMI, and KM_NMI_PTE Previously calling debug_kmap_atomic() with these types would cause spurious warnings. (triggered by SysProf using perf events) Signed-off-by: Soeren Sandmann Pedersen Cc: Linus Torvalds Cc: a.p.zijlstra@chello.nl Cc: # .31.x LKML-Reference: Signed-off-by: Ingo Molnar --- mm/highmem.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/mm/highmem.c b/mm/highmem.c index 33587de6b87..9c1e627f282 100644 --- a/mm/highmem.c +++ b/mm/highmem.c @@ -432,10 +432,15 @@ void debug_kmap_atomic(enum km_type type) return; if (unlikely(in_interrupt())) { - if (in_irq()) { + if (in_nmi()) { + if (type != KM_NMI && type != KM_NMI_PTE) { + WARN_ON(1); + warn_count--; + } + } else if (in_irq()) { if (type != KM_IRQ0 && type != KM_IRQ1 && type != KM_BIO_SRC_IRQ && type != KM_BIO_DST_IRQ && - type != KM_BOUNCE_READ) { + type != KM_BOUNCE_READ && type != KM_IRQ_PTE) { WARN_ON(1); warn_count--; } @@ -452,7 +457,9 @@ void debug_kmap_atomic(enum km_type type) } if (type == KM_IRQ0 || type == KM_IRQ1 || type == KM_BOUNCE_READ || - type == KM_BIO_SRC_IRQ || type == KM_BIO_DST_IRQ) { + type == KM_BIO_SRC_IRQ || type == KM_BIO_DST_IRQ || + type == KM_IRQ_PTE || type == KM_NMI || + type == KM_NMI_PTE ) { if (!irqs_disabled()) { WARN_ON(1); warn_count--; -- GitLab From a39533b4ddad388b64a20bcabd17ac125fd4ba65 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 9 Nov 2009 16:41:21 -0500 Subject: [PATCH 0709/1165] drm/radeon/r600: CS parser updates Add some additional regs that require relocs. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_cs.c | 18 ++++++++++++++++++ drivers/gpu/drm/radeon/r600d.h | 10 ++++++++++ 2 files changed, 28 insertions(+) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 17e42195c63..0d820764f34 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -466,6 +466,23 @@ static int r600_packet3_check(struct radeon_cs_parser *p, for (i = 0; i < pkt->count; i++) { reg = start_reg + (4 * i); switch (reg) { + case SQ_ESGS_RING_BASE: + case SQ_GSVS_RING_BASE: + case SQ_ESTMP_RING_BASE: + case SQ_GSTMP_RING_BASE: + case SQ_VSTMP_RING_BASE: + case SQ_PSTMP_RING_BASE: + case SQ_FBUF_RING_BASE: + case SQ_REDUC_RING_BASE: + case SX_MEMORY_EXPORT_BASE: + r = r600_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("bad SET_CONFIG_REG " + "0x%04X\n", reg); + return -EINVAL; + } + ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + break; case CP_COHER_BASE: /* use PACKET3_SURFACE_SYNC */ return -EINVAL; @@ -487,6 +504,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, reg = start_reg + (4 * i); switch (reg) { case DB_DEPTH_BASE: + case DB_HTILE_DATA_BASE: case CB_COLOR0_BASE: case CB_COLOR1_BASE: case CB_COLOR2_BASE: diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index cf238bf5700..b99f45d85d8 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -118,6 +118,7 @@ #define DB_DEBUG 0x9830 #define PREZ_MUST_WAIT_FOR_POSTZ_DONE (1 << 31) #define DB_DEPTH_BASE 0x2800C +#define DB_HTILE_DATA_BASE 0x28014 #define DB_WATERMARKS 0x9838 #define DEPTH_FREE(x) ((x) << 0) #define DEPTH_FLUSH(x) ((x) << 5) @@ -170,6 +171,14 @@ #define SQ_STACK_RESOURCE_MGMT_2 0x8c14 # define NUM_GS_STACK_ENTRIES(x) ((x) << 0) # define NUM_ES_STACK_ENTRIES(x) ((x) << 16) +#define SQ_ESGS_RING_BASE 0x8c40 +#define SQ_GSVS_RING_BASE 0x8c48 +#define SQ_ESTMP_RING_BASE 0x8c50 +#define SQ_GSTMP_RING_BASE 0x8c58 +#define SQ_VSTMP_RING_BASE 0x8c60 +#define SQ_PSTMP_RING_BASE 0x8c68 +#define SQ_FBUF_RING_BASE 0x8c70 +#define SQ_REDUC_RING_BASE 0x8c78 #define GRBM_CNTL 0x8000 # define GRBM_READ_TIMEOUT(x) ((x) << 0) @@ -355,6 +364,7 @@ #define SX_MISC 0x28350 +#define SX_MEMORY_EXPORT_BASE 0x9010 #define SX_DEBUG_1 0x9054 #define SMX_EVENT_RELEASE (1 << 0) #define ENABLE_NEW_SMX_ADDRESS (1 << 16) -- GitLab From eeba57518c01cf462d87bbfc59049139da47adcb Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 7 Nov 2009 16:27:32 +0100 Subject: [PATCH 0710/1165] drm/kms: Init the CRTC info fields for modes forced from the command line. Fixes fdo bug 24710. Signed-off-by: Francisco Jerez Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 1fe4e1d344f..bbfd110a716 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -331,6 +331,7 @@ create_mode: cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60, cmdline_mode->rb, cmdline_mode->interlace, cmdline_mode->margins); + drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); list_add(&mode->head, &connector->modes); return mode; } -- GitLab From 506f90eeae682dc96c11c7aefac0262b3a560b49 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 29 Oct 2009 14:45:52 +0100 Subject: [PATCH 0711/1165] x86, amd-ucode: Check UCODE_MAGIC before loading the container file Signed-off-by: Borislav Petkov Signed-off-by: Andreas Herrmann LKML-Reference: <20091029134552.GC30802@alberich.amd.com> Signed-off-by: Ingo Molnar --- arch/x86/kernel/microcode_amd.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 366baa17991..f4c538b681c 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -317,6 +317,12 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device) return UCODE_NFOUND; } + if (*(u32 *)firmware->data != UCODE_MAGIC) { + printk(KERN_ERR "microcode: invalid UCODE_MAGIC (0x%08x)\n", + *(u32 *)firmware->data); + return UCODE_ERROR; + } + ret = generic_load_microcode(cpu, firmware->data, firmware->size); release_firmware(firmware); -- GitLab From dbaccc0cca830efe9bb3c9e4a1cfcd6503790079 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Mon, 9 Nov 2009 15:17:24 +0000 Subject: [PATCH 0712/1165] ALSA: hda - Tweak OLPC XO-1.5 microphone bias Our contacts at Conexant suggested that we reduce the external microphone bias to 50% in order to center the input signal with the DC input range of the codec. This is because the microphone port is DC coupled for potential use with sensors. Signed-off-by: Daniel Drake Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 6479e65858d..905859d4f4d 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -110,6 +110,7 @@ struct conexant_spec { unsigned int dell_automute; unsigned int port_d_mode; + unsigned char ext_mic_bias; }; static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo, @@ -1927,6 +1928,11 @@ static hda_nid_t cxt5066_adc_nids[3] = { 0x14, 0x15, 0x16 }; static hda_nid_t cxt5066_capsrc_nids[1] = { 0x17 }; #define CXT5066_SPDIF_OUT 0x21 +/* OLPC's microphone port is DC coupled for use with external sensors, + * therefore we use a 50% mic bias in order to center the input signal with + * the DC input range of the codec. */ +#define CXT5066_OLPC_EXT_MIC_BIAS PIN_VREF50 + static struct hda_channel_mode cxt5066_modes[1] = { { 2, NULL }, }; @@ -1980,9 +1986,10 @@ static int cxt5066_hp_master_sw_put(struct snd_kcontrol *kcontrol, /* toggle input of built-in and mic jack appropriately */ static void cxt5066_automic(struct hda_codec *codec) { - static struct hda_verb ext_mic_present[] = { + struct conexant_spec *spec = codec->spec; + struct hda_verb ext_mic_present[] = { /* enable external mic, port B */ - {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, spec->ext_mic_bias}, /* switch to external mic input */ {0x17, AC_VERB_SET_CONNECT_SEL, 0}, @@ -2235,7 +2242,7 @@ static struct hda_verb cxt5066_init_verbs_olpc[] = { {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */ /* Port B: external microphone */ - {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, CXT5066_OLPC_EXT_MIC_BIAS}, /* Port C: internal microphone */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, @@ -2353,6 +2360,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->input_mux = &cxt5066_capture_source; spec->port_d_mode = PIN_HP; + spec->ext_mic_bias = PIN_VREF80; spec->num_init_verbs = 1; spec->init_verbs[0] = cxt5066_init_verbs; @@ -2384,6 +2392,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc; spec->mixers[spec->num_mixers++] = cxt5066_mixers; spec->port_d_mode = 0; + spec->ext_mic_bias = CXT5066_OLPC_EXT_MIC_BIAS; /* no S/PDIF out */ spec->multiout.dig_out_nid = 0; -- GitLab From cc20d42986d5807cbe4f5c7c8e3dab2e59ea0db3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 9 Nov 2009 23:53:29 +0000 Subject: [PATCH 0713/1165] ARM: Use a definition for the userspace cmpxchg emulation syscall Use a definition for the cmpxchg SWI instead of hard-coding the number. Signed-off-by: Russell King Acked-by: Nicolas Pitre --- arch/arm/include/asm/unistd.h | 9 +++++++++ arch/arm/kernel/entry-armv.S | 7 ++++--- arch/arm/kernel/traps.c | 2 +- 3 files changed, 14 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 7020217fc49..4e506d09e5f 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -402,6 +402,15 @@ #define __ARM_NR_usr32 (__ARM_NR_BASE+4) #define __ARM_NR_set_tls (__ARM_NR_BASE+5) +/* + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ +#ifdef __KERNEL__ +#define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0) +#endif + /* * The following syscalls are obsolete and no longer available for EABI. */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 0022b4d57f8..d2903e3bc86 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -21,6 +21,7 @@ #include #include #include +#include #include "entry-header.S" @@ -908,10 +909,10 @@ __kuser_cmpxchg: @ 0xffff0fc0 * A special ghost syscall is used for that (see traps.c). */ stmfd sp!, {r7, lr} - mov r7, #0xff00 @ 0xfff0 into r7 for EABI - orr r7, r7, #0xf0 - swi #0x9ffff0 + ldr r7, =1f @ it's 20 bits + swi __ARM_NR_cmpxchg ldmfd sp!, {r7, pc} +1: .word __ARM_NR_cmpxchg #elif __LINUX_ARM_ARCH__ < 6 diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 1bbda04a538..3f361a783f4 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -528,7 +528,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) * __kuser_cmpxchg code in entry-armv.S should be aware of its * existence. Don't ever use this from user code. */ - case 0xfff0: + case NR(cmpxchg): for (;;) { extern void do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs); -- GitLab From 1efd374d78834a793663414402911765bcdda6eb Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Thu, 5 Nov 2009 13:32:40 +0200 Subject: [PATCH 0714/1165] [WATCHDOG] SBC-FITPC2 watchdog driver registration fix This patch fixes device registration process. Signed-off-by: Denis Turischev Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc_fitpc2_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c index 852ca197791..91430a89107 100644 --- a/drivers/watchdog/sbc_fitpc2_wdt.c +++ b/drivers/watchdog/sbc_fitpc2_wdt.c @@ -227,7 +227,7 @@ static int __init fitpc2_wdt_init(void) } err = misc_register(&fitpc2_wdt_miscdev); - if (!err) { + if (err) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, err); goto err_margin; -- GitLab From 4ac55982907e1d48e64feaa56be91b9b52d3714d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 10 Nov 2009 16:08:45 +0100 Subject: [PATCH 0715/1165] ALSA: hda - Avoid quirk for HP dc5750 The present quirk for HP dc5750 seems broken and maps the pins wrongly. Since the auto-parser works well for this device, set the default entry to use model=auto. Reference: Novell bnc#552154 https://bugzilla.novell.com/show_bug.cgi?id=552154 Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 9bb4f75ca43..d1ccb6eaf9f 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6249,7 +6249,7 @@ static struct snd_pci_quirk alc260_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013), - SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013), + SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */ SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600), -- GitLab From 8579d2d7779d7ff41ea2a0183015e0e5038f1043 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 21 Oct 2009 09:09:38 +0200 Subject: [PATCH 0716/1165] sound: rawmidi: fix double init when opening MIDI device with O_APPEND Commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a in 2.6.30 moved the substream initialization code to where it would be executed every time the substream is opened. This had the consequence that any further opening would drop and leak the data in the existing buffer, and that the device driver's open callback would be called multiple times, unexpectedly. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/core/rawmidi.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index c0adc14c91f..3071e6f5801 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -266,17 +266,19 @@ static int open_substream(struct snd_rawmidi *rmidi, { int err; - err = snd_rawmidi_runtime_create(substream); - if (err < 0) - return err; - err = substream->ops->open(substream); - if (err < 0) - return err; - substream->opened = 1; - if (substream->use_count++ == 0) + if (substream->use_count == 0) { + err = snd_rawmidi_runtime_create(substream); + if (err < 0) + return err; + err = substream->ops->open(substream); + if (err < 0) + return err; + substream->opened = 1; substream->active_sensing = 0; - if (mode & SNDRV_RAWMIDI_LFLG_APPEND) - substream->append = 1; + if (mode & SNDRV_RAWMIDI_LFLG_APPEND) + substream->append = 1; + } + substream->use_count++; rmidi->streams[substream->stream].substream_opened++; return 0; } -- GitLab From 16fb109644b5644e42ececeff644514de6f4bd03 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 21 Oct 2009 09:10:16 +0200 Subject: [PATCH 0717/1165] sound: rawmidi: fix checking of O_APPEND when opening MIDI device Commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a in 2.6.30 dropped the check that a substream must already have been opened with O_APPEND to be able to open it a second time. This would make it possible for a substream to be switched to append mode, which would mean that non-atomic writes would fail unexpectedly. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/core/rawmidi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 3071e6f5801..091405385e1 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -248,7 +248,8 @@ static int assign_substream(struct snd_rawmidi *rmidi, int subdevice, list_for_each_entry(substream, &s->substreams, list) { if (substream->opened) { if (stream == SNDRV_RAWMIDI_STREAM_INPUT || - !(mode & SNDRV_RAWMIDI_LFLG_APPEND)) + !(mode & SNDRV_RAWMIDI_LFLG_APPEND) || + !substream->append) continue; } if (subdevice < 0 || subdevice == substream->number) { -- GitLab From b7fe750fcceda4fa6bef399b0e2812562728ea82 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 21 Oct 2009 09:11:43 +0200 Subject: [PATCH 0718/1165] sound: rawmidi: fix MIDI device O_APPEND error handling Commit 9a1b64caac82aa02cb74587ffc798e6f42c6170a in 2.6.30 broke the error handling code in rawmidi_open_priv(). If only the output substream of a RawMIDI device has been opened and if this device is then opened with O_RDWR | O_APPEND and if the initialization of the input substream fails (either because of low memory or because the device driver's open callback fails), then the runtime structure of the already open output substream will be freed and all following writes through the first handle will cause snd_rawmidi_write() to use the NULL runtime pointer. Signed-off-by: Clemens Ladisch Cc: Signed-off-by: Takashi Iwai --- sound/core/rawmidi.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/sound/core/rawmidi.c b/sound/core/rawmidi.c index 091405385e1..70d6f25ba52 100644 --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -272,8 +272,10 @@ static int open_substream(struct snd_rawmidi *rmidi, if (err < 0) return err; err = substream->ops->open(substream); - if (err < 0) + if (err < 0) { + snd_rawmidi_runtime_free(substream); return err; + } substream->opened = 1; substream->active_sensing = 0; if (mode & SNDRV_RAWMIDI_LFLG_APPEND) @@ -300,27 +302,27 @@ static int rawmidi_open_priv(struct snd_rawmidi *rmidi, int subdevice, int mode, SNDRV_RAWMIDI_STREAM_INPUT, mode, &sinput); if (err < 0) - goto __error; + return err; } if (mode & SNDRV_RAWMIDI_LFLG_OUTPUT) { err = assign_substream(rmidi, subdevice, SNDRV_RAWMIDI_STREAM_OUTPUT, mode, &soutput); if (err < 0) - goto __error; + return err; } if (sinput) { err = open_substream(rmidi, sinput, mode); if (err < 0) - goto __error; + return err; } if (soutput) { err = open_substream(rmidi, soutput, mode); if (err < 0) { if (sinput) close_substream(rmidi, sinput, 0); - goto __error; + return err; } } @@ -328,13 +330,6 @@ static int rawmidi_open_priv(struct snd_rawmidi *rmidi, int subdevice, int mode, rfile->input = sinput; rfile->output = soutput; return 0; - - __error: - if (sinput && sinput->runtime) - snd_rawmidi_runtime_free(sinput); - if (soutput && soutput->runtime) - snd_rawmidi_runtime_free(soutput); - return err; } /* called from sound/core/seq/seq_midi.c */ -- GitLab From d8e235227899474976302cf272e5c2b756eb32de Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Fri, 6 Nov 2009 21:21:27 +0100 Subject: [PATCH 0719/1165] ssb-pcmcia: Fix 32bit register access in early bus scanning The scan function was using 32 bit access which does not work on 16bit CF cards. This patch corrects this by doing two 16 bit reads like ssb_pcmcia_read32 already does. mb -- Removed locking. That early in init there's no need for locking. Signed-off-by: Martin Fuzzey Signed-off-by: Michael Buesch Signed-off-by: John W. Linville --- drivers/ssb/scan.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index b74212d698c..e8b89e8ac9b 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid) static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, u16 offset) { + u32 lo, hi; + switch (bus->bustype) { case SSB_BUSTYPE_SSB: offset += current_coreidx * SSB_CORE_SIZE; @@ -174,7 +176,9 @@ static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, offset -= 0x800; } else ssb_pcmcia_switch_segment(bus, 0); - break; + lo = readw(bus->mmio + offset); + hi = readw(bus->mmio + offset + 2); + return lo | (hi << 16); case SSB_BUSTYPE_SDIO: offset += current_coreidx * SSB_CORE_SIZE; return ssb_sdio_scan_read32(bus, offset); -- GitLab From 8f611288c8db0c89447856c4c8970bb7ee535448 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 7 Nov 2009 18:37:37 +0100 Subject: [PATCH 0720/1165] b43: work around a locking issue in ->set_tim() ops->set_tim() must be atomic, so b43 trying to acquire a mutex leads to a kernel crash. This patch trades an easy to trigger crash in AP mode for an unlikely race condition. According to Michael, the real fix would be to allow set_tim() to sleep, since b43 is not the only driver that needs to sleep in all callbacks. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 86f35827f00..098dda1a67c 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4521,9 +4521,8 @@ static int b43_op_beacon_set_tim(struct ieee80211_hw *hw, { struct b43_wl *wl = hw_to_b43_wl(hw); - mutex_lock(&wl->mutex); + /* FIXME: add locking */ b43_update_templates(wl); - mutex_unlock(&wl->mutex); return 0; } -- GitLab From e1a6542f24fad84a132f79e13ca452c37df857c4 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Sat, 7 Nov 2009 19:14:47 +0100 Subject: [PATCH 0721/1165] rt2x00: update MAINTAINERS Although I have always been the active maintainer of the rt2x00 drivers, I was not mentioned explicitely in the MAINTAINERS file as such. Update the rt2x00 entry in the MAINTAINERS file to add my name and email address. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index c856aee0f1e..b37e0cdd763 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4280,6 +4280,7 @@ F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project +M: Ivo van Doorn L: linux-wireless@vger.kernel.org L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ -- GitLab From bcfc56a8be48501810eba992937cabdcdb989297 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 8 Nov 2009 21:59:00 -0500 Subject: [PATCH 0722/1165] ath5k: don't reset mcast filter when configuring the mode We should not zero out the multicast hash when configuring the operating mode, since a zero value means all multicast frames will get dropped. Also, ath5k_mode_setup() gets called after any reset, so the hash already set up in configure_filter() is lost. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 9c6ab5378f6..95a8e232b58 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -1125,7 +1125,6 @@ ath5k_mode_setup(struct ath5k_softc *sc) /* configure operational mode */ ath5k_hw_set_opmode(ah); - ath5k_hw_set_mcast_filter(ah, 0, 0); ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt); } -- GitLab From 6f9797ae22abbf6ade3eb53431e34c3c39214329 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 8 Nov 2009 21:59:01 -0500 Subject: [PATCH 0723/1165] ath5k: add LED support for HP Compaq CQ60 Add GPIO configuration for the Compaq CQ60 laptop Reported-by: David Dreggors Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/led.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index b767c3b67b2..814872f70a6 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -69,6 +69,8 @@ static const struct pci_device_id ath5k_led_devices[] = { { ATH_SDEVICE(PCI_VENDOR_ID_AZWAVE, 0x1026), ATH_LED(3, 0) }, /* IBM ThinkPad AR5BXB6 (legovini@spiro.fisica.unipd.it) */ { ATH_SDEVICE(PCI_VENDOR_ID_IBM, 0x058a), ATH_LED(1, 0) }, + /* HP Compaq CQ60-206US (ddreggors@jumptv.com) */ + { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137a), ATH_LED(3, 1) }, /* HP Compaq C700 (nitrousnrg@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_HP, 0x0137b), ATH_LED(3, 1) }, /* IBM-specific AR5212 (all others) */ -- GitLab From 1e93bd4a132661f9403b61b821810df5ba2dc0f8 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Sun, 8 Nov 2009 21:59:02 -0500 Subject: [PATCH 0724/1165] ath5k: add LED definition for BenQ Joybook R55v Setup the GPIOs for the BenQ Joybook netbook. Signed-off-by: Bob Copeland Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/led.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath5k/led.c b/drivers/net/wireless/ath/ath5k/led.c index 814872f70a6..b548c8eaaae 100644 --- a/drivers/net/wireless/ath/ath5k/led.c +++ b/drivers/net/wireless/ath/ath5k/led.c @@ -63,6 +63,8 @@ static const struct pci_device_id ath5k_led_devices[] = { { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0422), ATH_LED(1, 1) }, /* E-machines E510 (tuliom@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_AMBIT, 0x0428), ATH_LED(3, 0) }, + /* BenQ Joybook R55v (nowymarluk@wp.pl) */ + { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0100), ATH_LED(1, 0) }, /* Acer Extensa 5620z (nekoreeve@gmail.com) */ { ATH_SDEVICE(PCI_VENDOR_ID_QMI, 0x0105), ATH_LED(3, 0) }, /* Fukato Datacask Jupiter 1014a (mrb74@gmx.at) */ -- GitLab From 3da0d662e3911ca8345f049627533eeb1a2f820a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 9 Nov 2009 16:56:06 -0600 Subject: [PATCH 0725/1165] rtl8187: Fix sparse warnings Due to a missing header include, sparse generates the following warnings: CHECK drivers/net/wireless/rtl818x/rtl8187_rfkill.c warning: symbol 'rtl8187_rfkill_init' was not declared. Should it be static? warning: symbol 'rtl8187_rfkill_poll' was not declared. Should it be static? warning: symbol 'rtl8187_rfkill_exit' was not declared. Should it be static? Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_rfkill.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c index 9fab13e4004..cad8037ab2a 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_rfkill.c +++ b/drivers/net/wireless/rtl818x/rtl8187_rfkill.c @@ -18,6 +18,7 @@ #include #include "rtl8187.h" +#include "rtl8187_rfkill.h" static bool rtl8187_is_radio_enabled(struct rtl8187_priv *priv) { -- GitLab From 866d4700150656b928f366c395bab9ab0e1a06a3 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 9 Nov 2009 18:04:12 -0800 Subject: [PATCH 0726/1165] Libertas: coding style cleanup in ethtool.c Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/ethtool.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c index 039b555e4d7..6efa3882d0a 100644 --- a/drivers/net/wireless/libertas/ethtool.c +++ b/drivers/net/wireless/libertas/ethtool.c @@ -175,10 +175,14 @@ static int lbs_ethtool_set_wol(struct net_device *dev, if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY)) return -EOPNOTSUPP; - if (wol->wolopts & WAKE_UCAST) criteria |= EHS_WAKE_ON_UNICAST_DATA; - if (wol->wolopts & WAKE_MCAST) criteria |= EHS_WAKE_ON_MULTICAST_DATA; - if (wol->wolopts & WAKE_BCAST) criteria |= EHS_WAKE_ON_BROADCAST_DATA; - if (wol->wolopts & WAKE_PHY) criteria |= EHS_WAKE_ON_MAC_EVENT; + if (wol->wolopts & WAKE_UCAST) + criteria |= EHS_WAKE_ON_UNICAST_DATA; + if (wol->wolopts & WAKE_MCAST) + criteria |= EHS_WAKE_ON_MULTICAST_DATA; + if (wol->wolopts & WAKE_BCAST) + criteria |= EHS_WAKE_ON_BROADCAST_DATA; + if (wol->wolopts & WAKE_PHY) + criteria |= EHS_WAKE_ON_MAC_EVENT; return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL); } -- GitLab From c3b866ad7ef9a74fc2e0d7f0c5520ad09c8536f3 Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Mon, 9 Nov 2009 18:04:13 -0800 Subject: [PATCH 0727/1165] Libertas: fix issues while configuring host sleep using ethtool wol Configuration of wake-on-lan for unicast, multicast, broadcast, physical activity was not working. Kernel panic issue was there when user tries to disable WOL. Fixed them. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/ethtool.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c index 6efa3882d0a..53d56ab83c0 100644 --- a/drivers/net/wireless/libertas/ethtool.c +++ b/drivers/net/wireless/libertas/ethtool.c @@ -169,9 +169,6 @@ static int lbs_ethtool_set_wol(struct net_device *dev, struct lbs_private *priv = dev->ml_priv; uint32_t criteria = 0; - if (priv->wol_criteria == 0xffffffff && wol->wolopts) - return -EOPNOTSUPP; - if (wol->wolopts & ~(WAKE_UCAST|WAKE_MCAST|WAKE_BCAST|WAKE_PHY)) return -EOPNOTSUPP; @@ -183,6 +180,8 @@ static int lbs_ethtool_set_wol(struct net_device *dev, criteria |= EHS_WAKE_ON_BROADCAST_DATA; if (wol->wolopts & WAKE_PHY) criteria |= EHS_WAKE_ON_MAC_EVENT; + if (wol->wolopts == 0) + criteria |= EHS_REMOVE_WAKEUP; return lbs_host_sleep_cfg(priv, criteria, (struct wol_config *)NULL); } -- GitLab From 73871f7181a1406c67e93c8c83f5edb26057a2a6 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 15:17:04 -0800 Subject: [PATCH 0728/1165] iwlwifi: Use RTS/CTS as the preferred protection mechanism for 6000 series When 802.11g was introduced, we had RTS/CTS and CTS-to-Self protection mechanisms. In an HT Beacon, HT stations use the "Operating Mode" field in the HT Information Element to determine whether or not to use protection. The Operating Mode field has 4 possible settings: 0-3: Mode 0: If all stations in the BSS are 20/40 MHz HT capable, or if the BSS is 20/40 MHz capable, or if all stations in the BSS are 20 MHz HT stations in a 20 MHz BSS Mode 1: used if there are non-HT stations or APs using the primary or secondary channels Mode 2: if only HT stations are associated in the BSS and at least one 20 MHz HT station is associated. Mode 3: used if one or more non-HT stations are associated in the BSS. When in operating modes 1 or 3, and the Use_Protection field is 1 in the Beacon's ERP IE, all HT transmissions must be protected using RTS/CTS or CTS-to-Self. By default, CTS-to-self is the preferred protection mechanism for less overhead and higher throughput; but using the full RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment. For 6000 series WIFI NIC, RTS/CTS protection mechanism is the recommended choice for HT traffic based on the HW design. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 5 +++++ drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 9 +++++++++ drivers/net/wireless/iwlwifi/iwl-agn.c | 10 +++++++--- drivers/net/wireless/iwlwifi/iwl-core.h | 2 ++ 4 files changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index c295b8ee922..1473452ba22 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -175,6 +175,7 @@ struct iwl_cfg iwl6000h_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; /* @@ -198,6 +199,7 @@ struct iwl_cfg iwl6000i_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6050_2agn_cfg = { @@ -218,6 +220,7 @@ struct iwl_cfg iwl6050_2agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6000_3agn_cfg = { @@ -238,6 +241,7 @@ struct iwl_cfg iwl6000_3agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; struct iwl_cfg iwl6050_3agn_cfg = { @@ -258,6 +262,7 @@ struct iwl_cfg iwl6050_3agn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX)); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 346dc06fa7b..81726ee3285 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -418,6 +418,15 @@ static void rs_tl_turn_on_agg(struct iwl_priv *priv, u8 tid, else if (tid == IWL_AGG_ALL_TID) for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++) rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta); + if (priv->cfg->use_rts_for_ht) { + /* + * switch to RTS/CTS if it is the prefer protection method + * for HT traffic + */ + IWL_DEBUG_HT(priv, "use RTS/CTS protection for HT\n"); + priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN; + iwlcore_commit_rxon(priv); + } } static inline int get_num_of_ant_from_rate(u32 rate_n_flags) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 9b5ea8ba721..877af443aac 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -115,9 +115,6 @@ int iwl_commit_rxon(struct iwl_priv *priv) /* always get timestamp with Rx frame */ priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK; - /* allow CTS-to-self if possible. this is relevant only for - * 5000, but will not damage 4965 */ - priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; ret = iwl_check_rxon_cmd(priv); if (ret) { @@ -217,6 +214,13 @@ int iwl_commit_rxon(struct iwl_priv *priv) "Could not send WEP static key.\n"); } + /* + * allow CTS-to-self if possible for new association. + * this is relevant only for 5000 series and up, + * but will not damage 4965 + */ + priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN; + /* Apply the new configuration * RXON assoc doesn't clear the station table in uCode, */ diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index e50103a956b..7754538c219 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -213,6 +213,7 @@ struct iwl_mod_params { * @pa_type: used by 6000 series only to identify the type of Power Amplifier * @max_ll_items: max number of OTP blocks * @shadow_ram_support: shadow support for OTP memory + * @use_rts_for_ht: use rts/cts protection for HT traffic * * We enable the driver to be backward compatible wrt API version. The * driver specifies which APIs it supports (with @ucode_api_max being the @@ -255,6 +256,7 @@ struct iwl_cfg { const bool shadow_ram_support; const bool ht_greenfield_support; const bool broken_powersave; + bool use_rts_for_ht; }; /*************************** -- GitLab From d01032e4fd33110f9f3a085a36cb819c1dfc5827 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Fri, 6 Nov 2009 15:17:05 -0800 Subject: [PATCH 0729/1165] iwlwifi: Fix issue on file transfer stalled in HT mode Turn on RTS/CTS for HT to prevent uCode TX fifo underrun This is fix for http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2103 Signed-off-by: Wey-Yi Guy Tested-by: Jiajia Zheng Signed-off-by: Reinette Chatre Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-1000.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 2716b91ba9f..950267ab556 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -161,5 +161,6 @@ struct iwl_cfg iwl1000_bgn_cfg = { .max_ll_items = OTP_MAX_LL_ITEMS_1000, .shadow_ram_support = false, .ht_greenfield_support = true, + .use_rts_for_ht = true, /* use rts/cts protection */ }; -- GitLab From ee90732456fe8e75406fdd3cd136a4bfb7ce31f5 Mon Sep 17 00:00:00 2001 From: Tao Hu Date: Tue, 10 Nov 2009 18:55:17 -0800 Subject: [PATCH 0730/1165] omap: Fix race condition in omap dma driver The bug could cause irq enable bit of one DMA channel is cleared/set unexpectedly when 2 (or more) drivers are calling omap_request_dma()/omap_free_dma() simultaneously Signed-off-by: Fei Yang Signed-off-by: Tao Hu Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index b53125f4129..02ed94526aa 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -691,13 +691,16 @@ static inline void disable_lnk(int lch) static inline void omap2_enable_irq_lch(int lch) { u32 val; + unsigned long flags; if (!cpu_class_is_omap2()) return; + spin_lock_irqsave(&dma_chan_lock, flags); val = dma_read(IRQENABLE_L0); val |= 1 << lch; dma_write(val, IRQENABLE_L0); + spin_unlock_irqrestore(&dma_chan_lock, flags); } int omap_request_dma(int dev_id, const char *dev_name, @@ -799,10 +802,13 @@ void omap_free_dma(int lch) if (cpu_class_is_omap2()) { u32 val; + + spin_lock_irqsave(&dma_chan_lock, flags); /* Disable interrupts */ val = dma_read(IRQENABLE_L0); val &= ~(1 << lch); dma_write(val, IRQENABLE_L0); + spin_unlock_irqrestore(&dma_chan_lock, flags); /* Clear the CSR register and IRQ status register */ dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR(lch)); -- GitLab From 6d1352420901b0a74e6149a891ff4457f7199651 Mon Sep 17 00:00:00 2001 From: Tobias Klauser Date: Tue, 10 Nov 2009 18:55:19 -0800 Subject: [PATCH 0731/1165] omap: Use resource_size Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors and actually fixes one in mailbox.c. Signed-off-by: Tobias Klauser Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 2 +- arch/arm/mach-omap2/mailbox.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 15876828db2..f8657568b1b 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -366,7 +366,7 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) if (r < 0) goto out; - gpmc_cs_enable_mem(cs, res->start, res->end - res->start + 1); + gpmc_cs_enable_mem(cs, res->start, resource_size(res)); *base = res->start; gpmc_cs_set_reserved(cs, 1); out: diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index c035ad3426d..ef57b38a56a 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -300,7 +300,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev) dev_err(&pdev->dev, "invalid mem resource\n"); return -ENODEV; } - mbox_base = ioremap(res->start, res->end - res->start); + mbox_base = ioremap(res->start, resource_size(res)); if (!mbox_base) return -ENOMEM; -- GitLab From f56ab498db55f1b7f5219aa5c7a04d562392cbb8 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 6 Oct 2009 10:52:50 -0500 Subject: [PATCH 0732/1165] powerpc: pasemi_defconfig update pasemi_defconfig hasn't been updated for a year. Mostly a refresh of defaults, but this also disables 64K pages. Signed-off-by: Olof Johansson Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/configs/pasemi_defconfig | 628 +++++++++++++++++++------- 1 file changed, 461 insertions(+), 167 deletions(-) diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 4f8681cc8d7..20ba0cfff8b 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,49 +1,58 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 27 16:08:06 2008 +# Linux kernel version: 2.6.32-rc3 +# Tue Oct 6 10:27:18 2009 # CONFIG_PPC64=y # # Processor support # +CONFIG_PPC_BOOK3S_64=y +# CONFIG_PPC_BOOK3E_64 is not set +CONFIG_PPC_BOOK3S=y CONFIG_POWER4_ONLY=y CONFIG_POWER4=y # CONFIG_TUNE_CELL is not set CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y +# CONFIG_VSX is not set CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_64=y CONFIG_PPC_MM_SLICES=y # CONFIG_VIRT_CPU_ACCOUNTING is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y +CONFIG_PPC_PERF_CTRS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_64BIT=y CONFIG_WORD_SIZE=64 -CONFIG_PPC_MERGE=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_MMU=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_IRQ_PER_CPU=y CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_ARCH_HAS_ILOG2_U64=y CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -51,11 +60,14 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y +CONFIG_DTC=y # CONFIG_DEFAULT_UIMAGE is not set # CONFIG_PPC_DCR_NATIVE is not set # CONFIG_PPC_DCR_MMIO is not set # CONFIG_PPC_OF_PLATFORM_PCI is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -72,10 +84,20 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=64 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -84,13 +106,17 @@ CONFIG_NAMESPACES=y # CONFIG_IPC_NS is not set # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -98,32 +124,52 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_EVENT_PROFILE=y +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set +CONFIG_TRACEPOINTS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_SYSCALL_WRAPPERS=y +CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +177,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # @@ -150,19 +195,14 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y # # Platform support # -CONFIG_PPC_MULTIPLATFORM=y -# CONFIG_PPC_82xx is not set -# CONFIG_PPC_83xx is not set -# CONFIG_PPC_86xx is not set # CONFIG_PPC_PSERIES is not set # CONFIG_PPC_ISERIES is not set -# CONFIG_PPC_MPC512x is not set -# CONFIG_PPC_MPC5121 is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set CONFIG_PPC_PASEMI=y @@ -178,8 +218,10 @@ CONFIG_PPC_PASEMI_MDIO=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_IBM_CELL_BLADE is not set # CONFIG_PPC_CELLEB is not set +# CONFIG_PPC_CELL_QPACE is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y # CONFIG_IPIC is not set CONFIG_MPIC=y # CONFIG_MPIC_WEIRD is not set @@ -213,6 +255,7 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y # CONFIG_PPC_PASEMI_CPUFREQ=y # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -226,16 +269,19 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y CONFIG_IOMMU_HELPER=y +# CONFIG_SWIOTLB is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -243,6 +289,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set # CONFIG_NUMA is not set +CONFIG_MAX_ACTIVE_REGIONS=256 CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -253,20 +300,28 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_PPC_HAS_HASH_64K=y +# CONFIG_PPC_4K_PAGES is not set +# CONFIG_PPC_16K_PAGES is not set CONFIG_PPC_64K_PAGES=y +# CONFIG_PPC_256K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=9 # CONFIG_PPC_SUBPAGE_PROT is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" # CONFIG_PM is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -285,6 +340,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_PCCARD=y CONFIG_PCMCIA_DEBUG=y CONFIG_PCMCIA=y @@ -301,13 +358,10 @@ CONFIG_CARDBUS=y CONFIG_ELECTRA_CF=y # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set +# CONFIG_RELOCATABLE is not set CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 CONFIG_PHYSICAL_START=0x00000000 - -# -# Networking -# CONFIG_NET=y # @@ -356,9 +410,11 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -368,25 +424,32 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # -# Wireless +# CFG80211 needs to be enabled for MAC80211 # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -398,15 +461,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y # CONFIG_MTD_PARTITIONS is not set @@ -477,12 +544,18 @@ CONFIG_MTD_NAND_PASEMI=y # CONFIG_MTD_NAND_FSL_ELBC is not set # CONFIG_MTD_ONENAND is not set +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + # # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -501,29 +574,41 @@ CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_CB710_CORE is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=y CONFIG_IDE_TASK_IOCTL=y CONFIG_IDE_PROC_FS=y @@ -542,14 +627,13 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -563,8 +647,6 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD_ONLY is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -586,10 +668,6 @@ CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y @@ -606,6 +684,8 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -614,11 +694,16 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -626,7 +711,6 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -637,10 +721,14 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SIL24=y @@ -662,6 +750,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATP867X is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set @@ -690,6 +779,7 @@ CONFIG_ATA_GENERIC=y CONFIG_PATA_PCMCIA=y # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set @@ -703,12 +793,15 @@ CONFIG_PATA_OF_PLATFORM=y # CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +# CONFIG_MULTICORE_RAID456 is not set +CONFIG_MD_RAID6_PQ=y +# CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y @@ -725,12 +818,19 @@ CONFIG_DM_CRYPT=y # # IEEE 1394 (FireWire) support # + +# +# You can enable one or both FireWire driver stacks. +# + +# +# See the help texts for more information. +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set CONFIG_DUMMY=y # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -753,6 +853,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -761,19 +864,23 @@ CONFIG_MII=y # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -783,19 +890,22 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y -CONFIG_E1000_NAPI=y -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -806,30 +916,40 @@ CONFIG_E1000_NAPI=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set +# CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_VXGE is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set CONFIG_PASEMI_MAC=y +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set +# CONFIG_BE2NET is not set # CONFIG_TR is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wireless LAN +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -874,17 +994,23 @@ CONFIG_INPUT_EVDEV=y # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -900,6 +1026,7 @@ CONFIG_INPUT_MOUSE=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -926,10 +1053,13 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=4 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set CONFIG_HW_RANDOM_PASEMI=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -948,57 +1078,85 @@ CONFIG_MAX_RAW_DEVS=256 CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -CONFIG_I2C_PASEMI=y -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PASEMI=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_EEPROM_LEGACY=y -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y CONFIG_HWMON_VID=y +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -1006,14 +1164,17 @@ CONFIG_HWMON_VID=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -1028,10 +1189,14 @@ CONFIG_SENSORS_LM85=y CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -1039,6 +1204,8 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -1050,44 +1217,40 @@ CONFIG_SENSORS_LM90=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y -# CONFIG_USB_DABUSB is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set +CONFIG_VGA_ARB=y CONFIG_DRM=y +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_TTM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set CONFIG_DRM_RADEON=y @@ -1099,6 +1262,7 @@ CONFIG_VGASTATE=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -1140,6 +1304,7 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -1148,12 +1313,16 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -1177,15 +1346,9 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -1198,24 +1361,24 @@ CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_RAWMIDI_SEQ=y +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set @@ -1234,6 +1397,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set +# CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set @@ -1246,6 +1410,8 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1262,6 +1428,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set @@ -1277,57 +1444,64 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set - -# -# ALSA PowerMac devices -# - -# -# ALSA PowerPC devices -# - -# -# USB devices -# +CONFIG_SND_PPC=y +CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=y CONFIG_SND_USB_USX2Y=y # CONFIG_SND_USB_CAIAQ is not set - -# -# PCMCIA devices -# +CONFIG_SND_PCMCIA=y # CONFIG_SND_VXPOCKET is not set # CONFIG_SND_PDAUDIOCF is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -# CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set # # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1343,18 +1517,26 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1363,6 +1545,8 @@ CONFIG_USB_UHCI_HCD=y CONFIG_USB_SL811_HCD=y # CONFIG_USB_SL811_CS is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1370,20 +1554,20 @@ CONFIG_USB_SL811_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1399,7 +1583,6 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1412,7 +1595,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1420,7 +1603,6 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1429,7 +1611,15 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1443,6 +1633,7 @@ CONFIG_EDAC=y # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_PASEMI=y +# CONFIG_EDAC_CPC925 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1472,6 +1663,9 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers @@ -1481,20 +1675,30 @@ CONFIG_RTC_DRV_DS1307=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_GENERIC is not set # CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + # # File systems # @@ -1504,11 +1708,13 @@ CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1516,6 +1722,10 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1524,6 +1734,11 @@ CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +# +# Caches +# +# CONFIG_FSCACHE is not set + # # CD-ROM/DVD Filesystems # @@ -1549,16 +1764,14 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1578,8 +1791,10 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1590,18 +1805,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1672,25 +1886,30 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set -CONFIG_LIBCRC32C=m +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y # # Kernel hacking @@ -1700,18 +1919,25 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1721,26 +1947,71 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_PAGEALLOC is not set -CONFIG_DEBUGGER=y +# CONFIG_PPC_EMULATED_STATS is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y # CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1749,23 +2020,34 @@ CONFIG_XMON_DISASSEMBLY=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y +CONFIG_ASYNC_PQ=y +CONFIG_ASYNC_RAID6_RECOV=y CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_TEST is not set @@ -1793,14 +2075,20 @@ CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y @@ -1830,7 +2118,13 @@ CONFIG_CRYPTO_DES=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set -- GitLab From bf3204cbff7d2606e758afb0994e8da6ae1c6c26 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 6 Nov 2009 21:39:07 -0800 Subject: [PATCH 0733/1165] Input: fix locking in memoryless force-feedback devices Now that input core acquires dev->event_lock spinlock and disables interrupts when propagating input events, using spin_lock_bh() in ff-memless driver is not allowed. Actually, the timer_lock itself is not needed anymore, we should simply use dev->event_lock as well. Also do a small cleanup in force-feedback core. Reported-by: kerneloops.org Reported-by: http://www.kerneloops.org/searchweek.php?search=ml_ff_set_gain Reported-by: Arjan van de Ven Signed-off-by: Dmitry Torokhov --- drivers/input/ff-core.c | 20 +++++++++++--------- drivers/input/ff-memless.c | 26 +++++++++++--------------- include/linux/input.h | 4 ++++ 3 files changed, 26 insertions(+), 24 deletions(-) diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index 72c63e5dd63..38df81fcdc3 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -337,16 +337,16 @@ int input_ff_create(struct input_dev *dev, int max_effects) dev->ff = ff; dev->flush = flush_effects; dev->event = input_ff_event; - set_bit(EV_FF, dev->evbit); + __set_bit(EV_FF, dev->evbit); /* Copy "true" bits into ff device bitmap */ for (i = 0; i <= FF_MAX; i++) if (test_bit(i, dev->ffbit)) - set_bit(i, ff->ffbit); + __set_bit(i, ff->ffbit); /* we can emulate RUMBLE with periodic effects */ if (test_bit(FF_PERIODIC, ff->ffbit)) - set_bit(FF_RUMBLE, dev->ffbit); + __set_bit(FF_RUMBLE, dev->ffbit); return 0; } @@ -362,12 +362,14 @@ EXPORT_SYMBOL_GPL(input_ff_create); */ void input_ff_destroy(struct input_dev *dev) { - clear_bit(EV_FF, dev->evbit); - if (dev->ff) { - if (dev->ff->destroy) - dev->ff->destroy(dev->ff); - kfree(dev->ff->private); - kfree(dev->ff); + struct ff_device *ff = dev->ff; + + __clear_bit(EV_FF, dev->evbit); + if (ff) { + if (ff->destroy) + ff->destroy(ff); + kfree(ff->private); + kfree(ff); dev->ff = NULL; } } diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c index 2d1415e1683..b483b2995fa 100644 --- a/drivers/input/ff-memless.c +++ b/drivers/input/ff-memless.c @@ -61,7 +61,6 @@ struct ml_device { struct ml_effect_state states[FF_MEMLESS_EFFECTS]; int gain; struct timer_list timer; - spinlock_t timer_lock; struct input_dev *dev; int (*play_effect)(struct input_dev *dev, void *data, @@ -368,38 +367,38 @@ static void ml_effect_timer(unsigned long timer_data) { struct input_dev *dev = (struct input_dev *)timer_data; struct ml_device *ml = dev->ff->private; + unsigned long flags; debug("timer: updating effects"); - spin_lock(&ml->timer_lock); + spin_lock_irqsave(&dev->event_lock, flags); ml_play_effects(ml); - spin_unlock(&ml->timer_lock); + spin_unlock_irqrestore(&dev->event_lock, flags); } +/* + * Sets requested gain for FF effects. Called with dev->event_lock held. + */ static void ml_ff_set_gain(struct input_dev *dev, u16 gain) { struct ml_device *ml = dev->ff->private; int i; - spin_lock_bh(&ml->timer_lock); - ml->gain = gain; for (i = 0; i < FF_MEMLESS_EFFECTS; i++) __clear_bit(FF_EFFECT_PLAYING, &ml->states[i].flags); ml_play_effects(ml); - - spin_unlock_bh(&ml->timer_lock); } +/* + * Start/stop specified FF effect. Called with dev->event_lock held. + */ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) { struct ml_device *ml = dev->ff->private; struct ml_effect_state *state = &ml->states[effect_id]; - unsigned long flags; - - spin_lock_irqsave(&ml->timer_lock, flags); if (value > 0) { debug("initiated play"); @@ -425,8 +424,6 @@ static int ml_ff_playback(struct input_dev *dev, int effect_id, int value) ml_play_effects(ml); } - spin_unlock_irqrestore(&ml->timer_lock, flags); - return 0; } @@ -436,7 +433,7 @@ static int ml_ff_upload(struct input_dev *dev, struct ml_device *ml = dev->ff->private; struct ml_effect_state *state = &ml->states[effect->id]; - spin_lock_bh(&ml->timer_lock); + spin_lock_irq(&dev->event_lock); if (test_bit(FF_EFFECT_STARTED, &state->flags)) { __clear_bit(FF_EFFECT_PLAYING, &state->flags); @@ -448,7 +445,7 @@ static int ml_ff_upload(struct input_dev *dev, ml_schedule_timer(ml); } - spin_unlock_bh(&ml->timer_lock); + spin_unlock_irq(&dev->event_lock); return 0; } @@ -482,7 +479,6 @@ int input_ff_create_memless(struct input_dev *dev, void *data, ml->private = data; ml->play_effect = play_effect; ml->gain = 0xffff; - spin_lock_init(&ml->timer_lock); setup_timer(&ml->timer, ml_effect_timer, (unsigned long)dev); set_bit(FF_GAIN, dev->ffbit); diff --git a/include/linux/input.h b/include/linux/input.h index 0ccfc30cd40..c2b1a7d244d 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1377,6 +1377,10 @@ extern struct class input_class; * methods; erase() is optional. set_gain() and set_autocenter() need * only be implemented if driver sets up FF_GAIN and FF_AUTOCENTER * bits. + * + * Note that playback(), set_gain() and set_autocenter() are called with + * dev->event_lock spinlock held and interrupts off and thus may not + * sleep. */ struct ff_device { int (*upload)(struct input_dev *dev, struct ff_effect *effect, -- GitLab From 71121d9fcc494453b9311992de220abb47dde3f1 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 10 Nov 2009 20:11:55 +0100 Subject: [PATCH 0734/1165] ALSA: hda - possible read past array alc88[02]_parse_auto_config() The test of index `i' is after the read - too late - and unsafe: if snd_hda_get_connections() fails in the last iteration a read beyond the array is possible. Signed-off-by: Roel Kluin Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d1ccb6eaf9f..daf6975b0c2 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4684,9 +4684,9 @@ static int alc880_parse_auto_config(struct hda_codec *codec) spec->multiout.dig_out_nid = dig_nid; else { spec->multiout.slave_dig_outs = spec->slave_dig_outs; - spec->slave_dig_outs[i - 1] = dig_nid; - if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) + if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1) break; + spec->slave_dig_outs[i - 1] = dig_nid; } } if (spec->autocfg.dig_in_pin) @@ -9813,9 +9813,9 @@ static int alc882_parse_auto_config(struct hda_codec *codec) spec->multiout.dig_out_nid = dig_nid; else { spec->multiout.slave_dig_outs = spec->slave_dig_outs; - spec->slave_dig_outs[i - 1] = dig_nid; - if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) + if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1) break; + spec->slave_dig_outs[i - 1] = dig_nid; } } if (spec->autocfg.dig_in_pin) -- GitLab From 96d25e532234bec1a1989e6e1baf702d43a78b0d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 11 Nov 2009 16:15:42 +0900 Subject: [PATCH 0735/1165] NFSv4: Fix a cache validation bug which causes getcwd() to return ENOENT Changeset a65318bf3afc93ce49227e849d213799b072c5fd (NFSv4: Simplify some cache consistency post-op GETATTRs) incorrectly changed the getattr bitmap for readdir(). This causes the readdir() function to fail to return a fileid/inode number, which again exposed a bug in the NFS readdir code that causes spurious ENOENT errors to appear in applications (see http://bugzilla.kernel.org/show_bug.cgi?id=14541). The immediate band aid is to revert the incorrect bitmap change, but more long term, we should change the NFS readdir code to cope with the fact that NFSv4 servers are not required to support fileids/inode numbers. Reported-by: Daniel J Blueman Cc: stable@kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ff37454fa78..741a562177f 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2767,7 +2767,7 @@ static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred, .pages = &page, .pgbase = 0, .count = count, - .bitmask = NFS_SERVER(dentry->d_inode)->cache_consistency_bitmask, + .bitmask = NFS_SERVER(dentry->d_inode)->attr_bitmask, }; struct nfs4_readdir_res res; struct rpc_message msg = { -- GitLab From ea0174a7137c8ca9f130ca681f3a99c872da6778 Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 12 Oct 2009 21:34:27 -0500 Subject: [PATCH 0736/1165] ext3: retry failed direct IO allocations On a 256M 4k block filesystem, doing this in a loop: dd if=/dev/zero of=test oflag=direct bs=1M count=64 rm -f test eventually leads to spurious ENOSPC: dd: writing `test': No space left on device As with other block allocation callers, it looks like we need to potentially retry the allocations on the initial ENOSPC. A similar patch went into ext4 (commit fbbf69456619de5d251cb9f1df609069178c62d5) Signed-off-by: Eric Sandeen Signed-off-by: Jan Kara --- fs/ext3/inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index acf1b142332..069a163393b 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1735,6 +1735,7 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, ssize_t ret; int orphan = 0; size_t count = iov_length(iov, nr_segs); + int retries = 0; if (rw == WRITE) { loff_t final_size = offset + count; @@ -1757,9 +1758,12 @@ static ssize_t ext3_direct_IO(int rw, struct kiocb *iocb, } } +retry: ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov, offset, nr_segs, ext3_get_block, NULL); + if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries)) + goto retry; if (orphan) { int err; -- GitLab From fe8bc91c4c30122b357d197117705cfd4fabaf28 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 16 Oct 2009 19:26:15 +0200 Subject: [PATCH 0737/1165] ext3: Wait for proper transaction commit on fsync We cannot rely on buffer dirty bits during fsync because pdflush can come before fsync is called and clear dirty bits without forcing a transaction commit. What we do is that we track which transaction has last changed the inode and which transaction last changed allocation and force it to disk on fsync. Signed-off-by: Jan Kara Reviewed-by: Aneesh Kumar K.V --- fs/ext3/fsync.c | 36 ++++++++++++++++-------------------- fs/ext3/inode.c | 32 +++++++++++++++++++++++++++++++- fs/ext3/super.c | 2 ++ include/linux/ext3_fs_i.h | 8 ++++++++ 4 files changed, 57 insertions(+), 21 deletions(-) diff --git a/fs/ext3/fsync.c b/fs/ext3/fsync.c index 451d166bbe9..8209f266e9a 100644 --- a/fs/ext3/fsync.c +++ b/fs/ext3/fsync.c @@ -46,19 +46,21 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync) { struct inode *inode = dentry->d_inode; + struct ext3_inode_info *ei = EXT3_I(inode); + journal_t *journal = EXT3_SB(inode->i_sb)->s_journal; int ret = 0; + tid_t commit_tid; + + if (inode->i_sb->s_flags & MS_RDONLY) + return 0; J_ASSERT(ext3_journal_current_handle() == NULL); /* - * data=writeback: + * data=writeback,ordered: * The caller's filemap_fdatawrite()/wait will sync the data. - * sync_inode() will sync the metadata - * - * data=ordered: - * The caller's filemap_fdatawrite() will write the data and - * sync_inode() will write the inode if it is dirty. Then the caller's - * filemap_fdatawait() will wait on the pages. + * Metadata is in the journal, we wait for a proper transaction + * to commit here. * * data=journal: * filemap_fdatawrite won't do anything (the buffers are clean). @@ -73,22 +75,16 @@ int ext3_sync_file(struct file * file, struct dentry *dentry, int datasync) goto out; } - if (datasync && !(inode->i_state & I_DIRTY_DATASYNC)) - goto flush; + if (datasync) + commit_tid = atomic_read(&ei->i_datasync_tid); + else + commit_tid = atomic_read(&ei->i_sync_tid); - /* - * The VFS has written the file data. If the inode is unaltered - * then we need not start a commit. - */ - if (inode->i_state & (I_DIRTY_SYNC|I_DIRTY_DATASYNC)) { - struct writeback_control wbc = { - .sync_mode = WB_SYNC_ALL, - .nr_to_write = 0, /* sys_fsync did this */ - }; - ret = sync_inode(inode, &wbc); + if (log_start_commit(journal, commit_tid)) { + log_wait_commit(journal, commit_tid); goto out; } -flush: + /* * In case we didn't commit a transaction, we have to flush * disk caches manually so that data really is on persistent diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 069a163393b..354ed3b47b3 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -699,8 +699,9 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode, int err = 0; struct ext3_block_alloc_info *block_i; ext3_fsblk_t current_block; + struct ext3_inode_info *ei = EXT3_I(inode); - block_i = EXT3_I(inode)->i_block_alloc_info; + block_i = ei->i_block_alloc_info; /* * If we're splicing into a [td]indirect block (as opposed to the * inode) then we need to get write access to the [td]indirect block @@ -741,6 +742,8 @@ static int ext3_splice_branch(handle_t *handle, struct inode *inode, inode->i_ctime = CURRENT_TIME_SEC; ext3_mark_inode_dirty(handle, inode); + /* ext3_mark_inode_dirty already updated i_sync_tid */ + atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid); /* had we spliced it onto indirect block? */ if (where->bh) { @@ -2754,6 +2757,8 @@ struct inode *ext3_iget(struct super_block *sb, unsigned long ino) struct ext3_inode_info *ei; struct buffer_head *bh; struct inode *inode; + journal_t *journal = EXT3_SB(sb)->s_journal; + transaction_t *transaction; long ret; int block; @@ -2831,6 +2836,30 @@ struct inode *ext3_iget(struct super_block *sb, unsigned long ino) ei->i_data[block] = raw_inode->i_block[block]; INIT_LIST_HEAD(&ei->i_orphan); + /* + * Set transaction id's of transactions that have to be committed + * to finish f[data]sync. We set them to currently running transaction + * as we cannot be sure that the inode or some of its metadata isn't + * part of the transaction - the inode could have been reclaimed and + * now it is reread from disk. + */ + if (journal) { + tid_t tid; + + spin_lock(&journal->j_state_lock); + if (journal->j_running_transaction) + transaction = journal->j_running_transaction; + else + transaction = journal->j_committing_transaction; + if (transaction) + tid = transaction->t_tid; + else + tid = journal->j_commit_sequence; + spin_unlock(&journal->j_state_lock); + atomic_set(&ei->i_sync_tid, tid); + atomic_set(&ei->i_datasync_tid, tid); + } + if (inode->i_ino >= EXT3_FIRST_INO(inode->i_sb) + 1 && EXT3_INODE_SIZE(inode->i_sb) > EXT3_GOOD_OLD_INODE_SIZE) { /* @@ -3015,6 +3044,7 @@ again: err = rc; ei->i_state &= ~EXT3_STATE_NEW; + atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid); out_brelse: brelse (bh); ext3_std_error(inode->i_sb, err); diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 7a520a862f4..427496c4767 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -466,6 +466,8 @@ static struct inode *ext3_alloc_inode(struct super_block *sb) return NULL; ei->i_block_alloc_info = NULL; ei->vfs_inode.i_version = 1; + atomic_set(&ei->i_datasync_tid, 0); + atomic_set(&ei->i_sync_tid, 0); return &ei->vfs_inode; } diff --git a/include/linux/ext3_fs_i.h b/include/linux/ext3_fs_i.h index ca1bfe90004..93e7428156b 100644 --- a/include/linux/ext3_fs_i.h +++ b/include/linux/ext3_fs_i.h @@ -137,6 +137,14 @@ struct ext3_inode_info { * by other means, so we have truncate_mutex. */ struct mutex truncate_mutex; + + /* + * Transactions that contain inode's metadata needed to complete + * fsync and fdatasync, respectively. + */ + atomic_t i_sync_tid; + atomic_t i_datasync_tid; + struct inode vfs_inode; }; -- GitLab From 7b02bec07efe1d6c7d48c786e0c1a38d28fe7245 Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Tue, 10 Nov 2009 17:13:22 +0800 Subject: [PATCH 0738/1165] JBD/JBD2: free j_wbuf if journal init fails. If journal init fails, we need to free j_wbuf. Cc: Andrew Morton Cc: Jan Kara Signed-off-by: Tao Ma Signed-off-by: Jan Kara --- fs/jbd/journal.c | 2 ++ fs/jbd2/journal.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index bd3c073b485..49d5cd6053c 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -756,6 +756,7 @@ journal_t * journal_init_dev(struct block_device *bdev, return journal; out_err: + kfree(journal->j_wbuf); kfree(journal); return NULL; } @@ -820,6 +821,7 @@ journal_t * journal_init_inode (struct inode *inode) return journal; out_err: + kfree(journal->j_wbuf); kfree(journal); return NULL; } diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index b0ab5219bec..fed85388ee8 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -913,6 +913,7 @@ journal_t * jbd2_journal_init_dev(struct block_device *bdev, return journal; out_err: + kfree(journal->j_wbuf); jbd2_stats_proc_exit(journal); kfree(journal); return NULL; @@ -986,6 +987,7 @@ journal_t * jbd2_journal_init_inode (struct inode *inode) return journal; out_err: + kfree(journal->j_wbuf); jbd2_stats_proc_exit(journal); kfree(journal); return NULL; -- GitLab From 690e744869f3262855b83b4fb59199cf142765b0 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 19 Oct 2009 19:55:13 -0400 Subject: [PATCH 0739/1165] [SCSI] gdth: Prevent negative offsets in ioctl CVE-2009-3080 A negative offset could be used to index before the event buffer and lead to a security breach. Signed-off-by: Dave Jones Cc: Stable Tree Signed-off-by: James Bottomley --- drivers/scsi/gdth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c index 185e6bc4dd4..9e8fce0f0c1 100644 --- a/drivers/scsi/gdth.c +++ b/drivers/scsi/gdth.c @@ -2900,7 +2900,7 @@ static int gdth_read_event(gdth_ha_str *ha, int handle, gdth_evt_str *estr) eindex = handle; estr->event_source = 0; - if (eindex >= MAX_EVENTS) { + if (eindex < 0 || eindex >= MAX_EVENTS) { spin_unlock_irqrestore(&ha->smp_lock, flags); return eindex; } -- GitLab From 1a0f437235ccb15361bfe0a37c7023f6234c2e9f Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 7 Nov 2009 22:05:34 +0000 Subject: [PATCH 0740/1165] [SCSI] bfa: declare MODULE_FIRMWARE Signed-off-by: Ben Hutchings Acked-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfad_fwimg.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/bfa/bfad_fwimg.c b/drivers/scsi/bfa/bfad_fwimg.c index b2f6949bc8d..bd34b0db2d6 100644 --- a/drivers/scsi/bfa/bfad_fwimg.c +++ b/drivers/scsi/bfa/bfad_fwimg.c @@ -41,6 +41,8 @@ u32 *bfi_image_cb; #define BFAD_FW_FILE_CT "ctfw.bin" #define BFAD_FW_FILE_CB "cbfw.bin" +MODULE_FIRMWARE(BFAD_FW_FILE_CT); +MODULE_FIRMWARE(BFAD_FW_FILE_CB); u32 * bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image, -- GitLab From 8561a84f85eccddf46212622f1f18317a220891b Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 11 Nov 2009 11:00:03 -0800 Subject: [PATCH 0741/1165] omap: Fix omapfb/lcdc on OMAP1510 broken when PM set With CONFIG_PM=y, the omapfb/lcdc device on Amstrad Delta, after initially starting correctly, breaks with the following error messages: omapfb omapfb: resetting (status 0xffffff96,reset count 1) ... omapfb omapfb: resetting (status 0xffffff96,reset count 100) omapfb omapfb: too many reset attempts, giving up. Looking closer at this I have found that it had been broken almost 2 years ago with commit 2418996e3b100114edb2ae110d5d4acb928909d2, PM fixes for OMAP1. The definite reason for broken omapfb/lcdc behavoiur in PM mode appeared to be ARM_IDLECT1:IDLIF_ARM (bit 6) put into idle regardless of LCD DMA possibly running. The bit were set based on return value of the omap_dma_running() function that did not check for dedicated LCD DMA channel status. The patch below fixes this. Note that the hardcoded register value will be fixed during the next merge cycle to use OMAP_LCDC_ defines. Currently the OMAP_LCDC_ defines are local to drivers/video/omap/lcdc.c, so let's not start moving those right now. Created against linux-2.6.32-rc6 Tested on Amstrad Delta Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/dma.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 02ed94526aa..68eaae324b6 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -1114,6 +1114,14 @@ int omap_dma_running(void) { int lch; + /* + * On OMAP1510, internal LCD controller will start the transfer + * when it gets enabled, so assume DMA running if LCD enabled. + */ + if (cpu_is_omap1510()) + if (omap_readw(0xfffec000 + 0x00) & (1 << 0)) + return 1; + /* Check if LCD DMA is running */ if (cpu_is_omap16xx()) if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) -- GitLab From 01943244552c6c747050e7d9d3a10ce31030b4e6 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Wed, 11 Nov 2009 11:00:34 -0800 Subject: [PATCH 0742/1165] omap1: Amstrad Delta defconfig fixes The patch provides the following fixes: - keep kernel small enough to boot with standard tools, - ensure compatibility with both new and legacy distros, - turn on support for recently added or fixed hardware features. Created and tested against linux-2.6.32-rc5. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/configs/ams_delta_defconfig | 24 +++++++++++++++++------- 1 file changed, 17 insertions(+), 7 deletions(-) diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig index 764732529ea..e8f7380b67d 100644 --- a/arch/arm/configs/ams_delta_defconfig +++ b/arch/arm/configs/ams_delta_defconfig @@ -55,10 +55,10 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y -# CONFIG_EMBEDDED is not set +CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS is not set # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -224,7 +224,7 @@ CONFIG_CPU_CP15_MMU=y # # Processor Features # -# CONFIG_ARM_THUMB is not set +CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_CPU_DCACHE_WRITETHROUGH=y @@ -248,7 +248,7 @@ CONFIG_CPU_DCACHE_WRITETHROUGH=y # CONFIG_HIGH_RES_TIMERS is not set CONFIG_PREEMPT=y CONFIG_HZ=100 -# CONFIG_AEABI is not set +CONFIG_AEABI=y # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -299,7 +299,9 @@ CONFIG_BINFMT_ELF=y # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_SUSPEND is not set +CONFIG_PM_RUNTIME=y # # Networking @@ -670,7 +672,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -784,6 +786,7 @@ CONFIG_I2C_OMAP=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +CONFIG_GPIO_SYSFS=y # # Dallas's 1-wire bus @@ -820,6 +823,7 @@ CONFIG_LEDS_AMS_DELTA=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y # # Multimedia devices @@ -896,7 +900,13 @@ CONFIG_LOGO_LINUX_CLUT224=y # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_AMS_DELTA=y # # HID Devices -- GitLab From 24de042ca4faa5dc1811d7b6a8b6eefd97ed7577 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Wed, 11 Nov 2009 11:00:35 -0800 Subject: [PATCH 0743/1165] omap3: pandora: Fix keypad keymap The original TWL4030 keypad driver from linux-omap used KEY() macro defined as (col, row), but while it was merged upstream it was changed to use matrix keypad infrastructure, which uses (row, col) format. Update the keymap in board file to match layout of mainline driver. Signed-off-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3pandora.c | 78 ++++++++++++------------ 1 file changed, 39 insertions(+), 39 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 5326e0d6159..7519edb6915 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -134,50 +134,50 @@ static void __init pandora_keys_gpio_init(void) } static int board_keymap[] = { - /* col, row, code */ + /* row, col, code */ KEY(0, 0, KEY_9), - KEY(0, 1, KEY_0), - KEY(0, 2, KEY_BACKSPACE), - KEY(0, 3, KEY_O), - KEY(0, 4, KEY_P), - KEY(0, 5, KEY_K), - KEY(0, 6, KEY_L), - KEY(0, 7, KEY_ENTER), - KEY(1, 0, KEY_8), + KEY(0, 1, KEY_8), + KEY(0, 2, KEY_I), + KEY(0, 3, KEY_J), + KEY(0, 4, KEY_N), + KEY(0, 5, KEY_M), + KEY(1, 0, KEY_0), KEY(1, 1, KEY_7), - KEY(1, 2, KEY_6), - KEY(1, 3, KEY_5), - KEY(1, 4, KEY_4), - KEY(1, 5, KEY_3), - KEY(1, 6, KEY_2), - KEY(1, 7, KEY_1), - KEY(2, 0, KEY_I), - KEY(2, 1, KEY_U), + KEY(1, 2, KEY_U), + KEY(1, 3, KEY_H), + KEY(1, 4, KEY_B), + KEY(1, 5, KEY_SPACE), + KEY(2, 0, KEY_BACKSPACE), + KEY(2, 1, KEY_6), KEY(2, 2, KEY_Y), - KEY(2, 3, KEY_T), - KEY(2, 4, KEY_R), - KEY(2, 5, KEY_E), - KEY(2, 6, KEY_W), - KEY(2, 7, KEY_Q), - KEY(3, 0, KEY_J), - KEY(3, 1, KEY_H), - KEY(3, 2, KEY_G), + KEY(2, 3, KEY_G), + KEY(2, 4, KEY_V), + KEY(2, 5, KEY_FN), + KEY(3, 0, KEY_O), + KEY(3, 1, KEY_5), + KEY(3, 2, KEY_T), KEY(3, 3, KEY_F), - KEY(3, 4, KEY_D), - KEY(3, 5, KEY_S), - KEY(3, 6, KEY_A), - KEY(3, 7, KEY_LEFTSHIFT), - KEY(4, 0, KEY_N), - KEY(4, 1, KEY_B), - KEY(4, 2, KEY_V), - KEY(4, 3, KEY_C), + KEY(3, 4, KEY_C), + KEY(4, 0, KEY_P), + KEY(4, 1, KEY_4), + KEY(4, 2, KEY_R), + KEY(4, 3, KEY_D), KEY(4, 4, KEY_X), - KEY(4, 5, KEY_Z), - KEY(4, 6, KEY_DOT), - KEY(4, 7, KEY_COMMA), - KEY(5, 0, KEY_M), - KEY(5, 1, KEY_SPACE), - KEY(5, 2, KEY_FN), + KEY(5, 0, KEY_K), + KEY(5, 1, KEY_3), + KEY(5, 2, KEY_E), + KEY(5, 3, KEY_S), + KEY(5, 4, KEY_Z), + KEY(6, 0, KEY_L), + KEY(6, 1, KEY_2), + KEY(6, 2, KEY_W), + KEY(6, 3, KEY_A), + KEY(6, 4, KEY_DOT), + KEY(7, 0, KEY_ENTER), + KEY(7, 1, KEY_1), + KEY(7, 2, KEY_Q), + KEY(7, 3, KEY_LEFTSHIFT), + KEY(7, 4, KEY_COMMA), }; static struct matrix_keymap_data board_map_data = { -- GitLab From e9840dc00468c4d2ca63b9f80038533d0f931d16 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Wed, 11 Nov 2009 11:00:36 -0800 Subject: [PATCH 0744/1165] omap3: beagle: Fix USB host port power control The host port power is enabled by driving the nEN_USB_PWR low as stated in the comment. This fix is originally from Steve Sakoman . Signed-off-by: Jarkko Nikula Cc: Steve Sakoman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-omap3beagle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 70df6b4dbcd..08b0816afa6 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -162,7 +162,7 @@ static int beagle_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; -- GitLab From b30dcf5f37023d591caee80c233bf33706bc5a21 Mon Sep 17 00:00:00 2001 From: Sergio Aguirre Date: Wed, 11 Nov 2009 11:00:37 -0800 Subject: [PATCH 0745/1165] omap3: 3430sdp: Enable Linux Regulator framework Some drivers have dependencies on this, and therefore should be enabled. Signed-off-by: Sergio Aguirre Signed-off-by: Tony Lindgren --- arch/arm/configs/omap_3430sdp_defconfig | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index 8a4a7e2ba87..5a305f01530 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -1703,7 +1703,14 @@ CONFIG_RTC_DRV_TWL4030=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y # CONFIG_UIO is not set # CONFIG_STAGING is not set -- GitLab From 1ea6e6652a63f5db18d753d6a2c963d966b6d9c2 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Wed, 11 Nov 2009 11:00:38 -0800 Subject: [PATCH 0746/1165] omap3: update Pandora defconfig This patch updates defconfig to enable options needed to properly boot OMAP3 pandora board. It also enables MMC, OTG, GPIO LEDs, TWL4030 GPIO and sound drivers. Signed-off-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- arch/arm/configs/omap3_pandora_defconfig | 49 +++++++++++++++++++++--- 1 file changed, 44 insertions(+), 5 deletions(-) diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig index b54ad2e2da3..150deafb0a6 100644 --- a/arch/arm/configs/omap3_pandora_defconfig +++ b/arch/arm/configs/omap3_pandora_defconfig @@ -611,7 +611,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +CONFIG_KEYBOARD_GPIO=y CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set @@ -634,7 +634,8 @@ CONFIG_TOUCHSCREEN_ADS7846=y # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set -# CONFIG_INPUT_MISC is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_TWL4030_PWRBUTTON=y # # Hardware I/O ports @@ -834,7 +835,29 @@ CONFIG_DAB=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_SOUND is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +CONFIG_SND_VERBOSE_PRINTK=y +CONFIG_SND_DRIVERS=y +CONFIG_SND_USB=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_MCBSP=y +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_TWL4030=y + CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -1020,7 +1043,13 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_ACCESSIBILITY is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1084,9 +1113,12 @@ CONFIG_RTC_DRV_TWL4030=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_TWL4030=y + # # File systems # @@ -1407,3 +1439,10 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y + +# added by hand for now +CONFIG_KEYBOARD_TWL4030=y +CONFIG_USB_OTG_UTILS=y +CONFIG_TWL4030_USB=y +CONFIG_MMC_OMAP_HS=y + -- GitLab From 6346c93988caa3048bf4d81f9ba3608a7a195aa2 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:47 -0500 Subject: [PATCH 0747/1165] Btrfs: fix data allocation hint start Sometimes our start allocation hint when we cow a file can be either EXTENT_HOLE or some other such place holder, which is not optimal. So if we find that our em->block_start is one of these special values, check to see where the first block of the inode is stored, and use that as a hint. If that block is also a special value, just fallback on a hint of 0 and let the allocator figure out a good place to put the data. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 78139efe41f..d8393ddc72a 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -743,8 +743,22 @@ static noinline int cow_file_range(struct inode *inode, em = search_extent_mapping(&BTRFS_I(inode)->extent_tree, start, num_bytes); if (em) { - alloc_hint = em->block_start; - free_extent_map(em); + /* + * if block start isn't an actual block number then find the + * first block in this inode and use that as a hint. If that + * block is also bogus then just don't worry about it. + */ + if (em->block_start >= EXTENT_MAP_LAST_BYTE) { + free_extent_map(em); + em = search_extent_mapping(em_tree, 0, 0); + if (em && em->block_start < EXTENT_MAP_LAST_BYTE) + alloc_hint = em->block_start; + if (em) + free_extent_map(em); + } else { + alloc_hint = em->block_start; + free_extent_map(em); + } } read_unlock(&BTRFS_I(inode)->extent_tree.lock); btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0); -- GitLab From 249ac1e55c642c670f47aacdc57629bbbf10a8db Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: [PATCH 0748/1165] Btrfs: cleanup transaction starting and fix journal_info usage We use journal_info to tell if we're in a nested transaction to make sure we don't commit the transaction within a nested transaction. We use another method to see if there are any outstanding ioctl trans handles, so if we're starting one do not set current->journal_info, since it will screw with other filesystems. This patch also cleans up the starting stuff so there aren't any magic numbers. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/transaction.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index bca82a4ca8e..c207e8c32c9 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -163,8 +163,14 @@ static void wait_current_trans(struct btrfs_root *root) } } +enum btrfs_trans_type { + TRANS_START, + TRANS_JOIN, + TRANS_USERSPACE, +}; + static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, - int num_blocks, int wait) + int num_blocks, int type) { struct btrfs_trans_handle *h = kmem_cache_alloc(btrfs_trans_handle_cachep, GFP_NOFS); @@ -172,7 +178,8 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, mutex_lock(&root->fs_info->trans_mutex); if (!root->fs_info->log_root_recovering && - ((wait == 1 && !root->fs_info->open_ioctl_trans) || wait == 2)) + ((type == TRANS_START && !root->fs_info->open_ioctl_trans) || + type == TRANS_USERSPACE)) wait_current_trans(root); ret = join_transaction(root); BUG_ON(ret); @@ -186,7 +193,7 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, h->alloc_exclude_start = 0; h->delayed_ref_updates = 0; - if (!current->journal_info) + if (!current->journal_info && type != TRANS_USERSPACE) current->journal_info = h; root->fs_info->running_transaction->use_count++; @@ -198,18 +205,18 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root, int num_blocks) { - return start_transaction(root, num_blocks, 1); + return start_transaction(root, num_blocks, TRANS_START); } struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root, int num_blocks) { - return start_transaction(root, num_blocks, 0); + return start_transaction(root, num_blocks, TRANS_JOIN); } struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r, int num_blocks) { - return start_transaction(r, num_blocks, 2); + return start_transaction(r, num_blocks, TRANS_USERSPACE); } /* wait for a transaction commit to be fully complete */ -- GitLab From 01dea1efc23b511d3b58bb94da07ddb6d6db9895 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: [PATCH 0749/1165] Btrfs: fix how we set max_size for free space clusters This patch fixes a problem where max_size can be set to 0 even though we filled the cluster properly. We set max_size to 0 if we restart the cluster window, but if the new start entry is big enough to be our new cluster then we could return with a max_size set to 0, which will mean the next time we try to allocate from this cluster it will fail. So set max_extent to the entry's size. Tested this on my box and now we actually allocate from the cluster after we fill it. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 5c2caad7621..cb2849f0325 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1296,7 +1296,7 @@ again: window_start = entry->offset; window_free = entry->bytes; last = entry; - max_extent = 0; + max_extent = entry->bytes; } else { last = next; window_free += next->bytes; -- GitLab From 5df6a9f606bf2ee25ab8031bff124ed883b823be Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: [PATCH 0750/1165] Btrfs: fix some metadata enospc issues We weren't reserving metadata space for rename, rmdir and unlink, which could cause problems. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d8393ddc72a..bb7fd807280 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2488,7 +2488,19 @@ static int btrfs_unlink(struct inode *dir, struct dentry *dentry) root = BTRFS_I(dir)->root; + /* + * 5 items for unlink inode + * 1 for orphan + */ + ret = btrfs_reserve_metadata_space(root, 6); + if (ret) + return ret; + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) { + btrfs_unreserve_metadata_space(root, 6); + return PTR_ERR(trans); + } btrfs_set_trans_block_group(trans, dir); @@ -2503,6 +2515,7 @@ static int btrfs_unlink(struct inode *dir, struct dentry *dentry) nr = trans->blocks_used; btrfs_end_transaction_throttle(trans, root); + btrfs_unreserve_metadata_space(root, 6); btrfs_btree_balance_dirty(root, nr); return ret; } @@ -2583,7 +2596,16 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) return -ENOTEMPTY; + ret = btrfs_reserve_metadata_space(root, 5); + if (ret) + return ret; + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) { + btrfs_unreserve_metadata_space(root, 5); + return PTR_ERR(trans); + } + btrfs_set_trans_block_group(trans, dir); if (unlikely(inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) { @@ -2606,6 +2628,7 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) out: nr = trans->blocks_used; ret = btrfs_end_transaction_throttle(trans, root); + btrfs_unreserve_metadata_space(root, 5); btrfs_btree_balance_dirty(root, nr); if (ret && !err) @@ -5297,11 +5320,14 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, return -ENOTEMPTY; /* - * 2 items for dir items - * 1 item for orphan entry - * 1 item for ref + * We want to reserve the absolute worst case amount of items. So if + * both inodes are subvols and we need to unlink them then that would + * require 4 item modifications, but if they are both normal inodes it + * would require 5 item modifications, so we'll assume their normal + * inodes. So 5 * 2 is 10, plus 1 for the new link, so 11 total items + * should cover the worst case number of items we'll modify. */ - ret = btrfs_reserve_metadata_space(root, 4); + ret = btrfs_reserve_metadata_space(root, 11); if (ret) return ret; @@ -5417,7 +5443,7 @@ out_fail: if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) up_read(&root->fs_info->subvol_sem); - btrfs_unreserve_metadata_space(root, 4); + btrfs_unreserve_metadata_space(root, 11); return ret; } -- GitLab From df66916e71231e9f2377cac9c5c1e2d190f9a427 Mon Sep 17 00:00:00 2001 From: Li Dongyang Date: Fri, 6 Nov 2009 14:33:01 +0000 Subject: [PATCH 0751/1165] Btrfs: skip btrfs_release_path in btrfs_update_root and btrfs_del_root We don't need to call btrfs_release_path because btrfs_free_path will do that for us. Signed-off-by: Li Dongyang Signed-off-by: Chris Mason --- fs/btrfs/root-tree.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 9351428f30e..67fa2d29d66 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -159,7 +159,6 @@ int btrfs_update_root(struct btrfs_trans_handle *trans, struct btrfs_root write_extent_buffer(l, item, ptr, sizeof(*item)); btrfs_mark_buffer_dirty(path->nodes[0]); out: - btrfs_release_path(root, path); btrfs_free_path(path); return ret; } @@ -332,7 +331,6 @@ int btrfs_del_root(struct btrfs_trans_handle *trans, struct btrfs_root *root, BUG_ON(refs != 0); ret = btrfs_del_item(trans, root, path); out: - btrfs_release_path(root, path); btrfs_free_path(path); return ret; } -- GitLab From 4eb3991c5def39bcf553c14ebe2618fcb47b627f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 10 Nov 2009 09:01:43 +0000 Subject: [PATCH 0752/1165] Btrfs: avoid null deref in unpin_extent_cache() I re-orderred the checks to avoid dereferencing "em" if it was null. Found by smatch static checker. Signed-off-by: Dan Carpenter Signed-off-by: Chris Mason --- fs/btrfs/extent_map.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index 2c726b7b9fa..ccbdcb54ec5 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -208,7 +208,7 @@ int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len) write_lock(&tree->lock); em = lookup_extent_mapping(tree, start, len); - WARN_ON(em->start != start || !em); + WARN_ON(!em || em->start != start); if (!em) goto out; -- GitLab From ccf0e72537a9f68611ca575121afd08e2b4d0fb0 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: [PATCH 0753/1165] Btrfs: find ideal block group for caching This patch changes a few things. Hopefully the comments are helpfull, but I'll try and be as verbose here. Problem: My fedora box was taking 1 minute and 21 seconds to boot with btrfs as root. Part of this problem was we pick the first block group we can find and start caching it, even if it may not have enough free space. The other problem is we only search for cached block groups the first time around, which we won't find any cached block groups because this is a newly mounted fs, so we end up caching several block groups during bootup, which with alot of fragmentation takes around 30-45 seconds to complete, which bogs down the system. So Solution: 1) Don't cache block groups willy-nilly at first. Instead try and figure out which block group has the most free, and therefore will take the least amount of time to cache. 2) Don't be so picky about cached block groups. The other problem is once we've filled up a cluster, if the block group isn't finished caching the next time we try and do the allocation we'll completely ignore the cluster and start searching from the beginning of the space, which makes us cache more block groups, which slows us down even more. So instead of skipping block groups that are not finished caching when we have a hint, only skip the block group if it hasn't started caching yet. There is one other tweak in here. Before if we allocated a chunk and still couldn't find new space, we'd end up switching the space info to force another chunk allocation. This could make us end up with way too many chunks, so keep track of this particular case. With this patch and my previous cluster fixes my fedora box now boots in 43 seconds, and according to the bootchart is not held up by our block group caching at all. Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 109 ++++++++++++++++++++++++++++++++--------- 1 file changed, 86 insertions(+), 23 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index c56f91639dc..2a4cdceeb57 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4101,7 +4101,7 @@ wait_block_group_cache_done(struct btrfs_block_group_cache *cache) } enum btrfs_loop_type { - LOOP_CACHED_ONLY = 0, + LOOP_FIND_IDEAL = 0, LOOP_CACHING_NOWAIT = 1, LOOP_CACHING_WAIT = 2, LOOP_ALLOC_CHUNK = 3, @@ -4130,12 +4130,15 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, struct btrfs_block_group_cache *block_group = NULL; int empty_cluster = 2 * 1024 * 1024; int allowed_chunk_alloc = 0; + int done_chunk_alloc = 0; struct btrfs_space_info *space_info; int last_ptr_loop = 0; int loop = 0; bool found_uncached_bg = false; bool failed_cluster_refill = false; bool failed_alloc = false; + u64 ideal_cache_percent = 0; + u64 ideal_cache_offset = 0; WARN_ON(num_bytes < root->sectorsize); btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY); @@ -4171,14 +4174,19 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, empty_cluster = 0; if (search_start == hint_byte) { +ideal_cache: block_group = btrfs_lookup_block_group(root->fs_info, search_start); /* * we don't want to use the block group if it doesn't match our * allocation bits, or if its not cached. + * + * However if we are re-searching with an ideal block group + * picked out then we don't care that the block group is cached. */ if (block_group && block_group_bits(block_group, data) && - block_group_cache_done(block_group)) { + (block_group->cached != BTRFS_CACHE_NO || + search_start == ideal_cache_offset)) { down_read(&space_info->groups_sem); if (list_empty(&block_group->list) || block_group->ro) { @@ -4190,13 +4198,13 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, */ btrfs_put_block_group(block_group); up_read(&space_info->groups_sem); - } else + } else { goto have_block_group; + } } else if (block_group) { btrfs_put_block_group(block_group); } } - search: down_read(&space_info->groups_sem); list_for_each_entry(block_group, &space_info->block_groups, list) { @@ -4208,28 +4216,45 @@ search: have_block_group: if (unlikely(block_group->cached == BTRFS_CACHE_NO)) { + u64 free_percent; + + free_percent = btrfs_block_group_used(&block_group->item); + free_percent *= 100; + free_percent = div64_u64(free_percent, + block_group->key.offset); + free_percent = 100 - free_percent; + if (free_percent > ideal_cache_percent && + likely(!block_group->ro)) { + ideal_cache_offset = block_group->key.objectid; + ideal_cache_percent = free_percent; + } + /* - * we want to start caching kthreads, but not too many - * right off the bat so we don't overwhelm the system, - * so only start them if there are less than 2 and we're - * in the initial allocation phase. + * We only want to start kthread caching if we are at + * the point where we will wait for caching to make + * progress, or if our ideal search is over and we've + * found somebody to start caching. */ if (loop > LOOP_CACHING_NOWAIT || - atomic_read(&space_info->caching_threads) < 2) { + (loop > LOOP_FIND_IDEAL && + atomic_read(&space_info->caching_threads) < 2)) { ret = cache_block_group(block_group); BUG_ON(ret); } - } - - cached = block_group_cache_done(block_group); - if (unlikely(!cached)) { found_uncached_bg = true; - /* if we only want cached bgs, loop */ - if (loop == LOOP_CACHED_ONLY) + /* + * If loop is set for cached only, try the next block + * group. + */ + if (loop == LOOP_FIND_IDEAL) goto loop; } + cached = block_group_cache_done(block_group); + if (unlikely(!cached)) + found_uncached_bg = true; + if (unlikely(block_group->ro)) goto loop; @@ -4409,9 +4434,11 @@ loop: } up_read(&space_info->groups_sem); - /* LOOP_CACHED_ONLY, only search fully cached block groups - * LOOP_CACHING_NOWAIT, search partially cached block groups, but - * dont wait foR them to finish caching + /* LOOP_FIND_IDEAL, only search caching/cached bg's, and don't wait for + * for them to make caching progress. Also + * determine the best possible bg to cache + * LOOP_CACHING_NOWAIT, search partially cached block groups, kicking + * caching kthreads as we move along * LOOP_CACHING_WAIT, search everything, and wait if our bg is caching * LOOP_ALLOC_CHUNK, force a chunk allocation and try again * LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try @@ -4420,12 +4447,47 @@ loop: if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE && (found_uncached_bg || empty_size || empty_cluster || allowed_chunk_alloc)) { - if (found_uncached_bg) { + if (loop == LOOP_FIND_IDEAL && found_uncached_bg) { found_uncached_bg = false; - if (loop < LOOP_CACHING_WAIT) { - loop++; + loop++; + if (!ideal_cache_percent && + atomic_read(&space_info->caching_threads)) goto search; - } + + /* + * 1 of the following 2 things have happened so far + * + * 1) We found an ideal block group for caching that + * is mostly full and will cache quickly, so we might + * as well wait for it. + * + * 2) We searched for cached only and we didn't find + * anything, and we didn't start any caching kthreads + * either, so chances are we will loop through and + * start a couple caching kthreads, and then come back + * around and just wait for them. This will be slower + * because we will have 2 caching kthreads reading at + * the same time when we could have just started one + * and waited for it to get far enough to give us an + * allocation, so go ahead and go to the wait caching + * loop. + */ + loop = LOOP_CACHING_WAIT; + search_start = ideal_cache_offset; + ideal_cache_percent = 0; + goto ideal_cache; + } else if (loop == LOOP_FIND_IDEAL) { + /* + * Didn't find a uncached bg, wait on anything we find + * next. + */ + loop = LOOP_CACHING_WAIT; + goto search; + } + + if (loop < LOOP_CACHING_WAIT) { + loop++; + goto search; } if (loop == LOOP_ALLOC_CHUNK) { @@ -4437,7 +4499,8 @@ loop: ret = do_chunk_alloc(trans, root, num_bytes + 2 * 1024 * 1024, data, 1); allowed_chunk_alloc = 0; - } else { + done_chunk_alloc = 1; + } else if (!done_chunk_alloc) { space_info->force_alloc = 1; } -- GitLab From f5a84ee3cdd88d96b7bcede10af58598ad8d52a7 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 10 Nov 2009 21:23:48 -0500 Subject: [PATCH 0754/1165] Btrfs: fallback on uncompressed io if compressed io fails Currently compressed IO does not deal with not having its entire extent able to be allocated. So if we have enough free space to allocate for the extent, but its not contiguous, it will fail spectacularly. This patch fixes this by falling back on uncompressed IO which lets us spread the delalloc extent across multiple extents. I tested this by making us randomly think the reservation had failed to make it fallback on the uncompressed io way and it seemed to work fine. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index bb7fd807280..d3d7d46a6af 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -538,7 +538,7 @@ static noinline int submit_compressed_extents(struct inode *inode, struct btrfs_root *root = BTRFS_I(inode)->root; struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree; struct extent_io_tree *io_tree; - int ret; + int ret = 0; if (list_empty(&async_cow->extents)) return 0; @@ -552,6 +552,7 @@ static noinline int submit_compressed_extents(struct inode *inode, io_tree = &BTRFS_I(inode)->io_tree; +retry: /* did the compression code fall back to uncompressed IO? */ if (!async_extent->pages) { int page_started = 0; @@ -562,11 +563,11 @@ static noinline int submit_compressed_extents(struct inode *inode, async_extent->ram_size - 1, GFP_NOFS); /* allocate blocks */ - cow_file_range(inode, async_cow->locked_page, - async_extent->start, - async_extent->start + - async_extent->ram_size - 1, - &page_started, &nr_written, 0); + ret = cow_file_range(inode, async_cow->locked_page, + async_extent->start, + async_extent->start + + async_extent->ram_size - 1, + &page_started, &nr_written, 0); /* * if page_started, cow_file_range inserted an @@ -574,7 +575,7 @@ static noinline int submit_compressed_extents(struct inode *inode, * and IO for us. Otherwise, we need to submit * all those pages down to the drive. */ - if (!page_started) + if (!page_started && !ret) extent_write_locked_range(io_tree, inode, async_extent->start, async_extent->start + @@ -602,7 +603,21 @@ static noinline int submit_compressed_extents(struct inode *inode, async_extent->compressed_size, 0, alloc_hint, (u64)-1, &ins, 1); - BUG_ON(ret); + if (ret) { + int i; + for (i = 0; i < async_extent->nr_pages; i++) { + WARN_ON(async_extent->pages[i]->mapping); + page_cache_release(async_extent->pages[i]); + } + kfree(async_extent->pages); + async_extent->nr_pages = 0; + async_extent->pages = NULL; + unlock_extent(io_tree, async_extent->start, + async_extent->start + + async_extent->ram_size - 1, GFP_NOFS); + goto retry; + } + em = alloc_extent_map(GFP_NOFS); em->start = async_extent->start; em->len = async_extent->ram_size; -- GitLab From 33b258086441dd07e00133c79fcd8cbc6a76d737 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 11 Nov 2009 10:16:57 -0500 Subject: [PATCH 0755/1165] Btrfs: allow more metadata chunk preallocation On an FS where all of the space has not been allocated into chunks yet, the enospc can return enospc just because the existing metadata chunks are full. We get around this by allowing more metadata chunks to be allocated up to a certain limit, and finding the right limit is a little fuzzy. The problem is the reservations for delalloc would preallocate way too much of the FS as metadata. We need to start saying no and just force some IO to happen. But we also need to let a reasonable amount of the FS become metadata. This bumps the hard limit up, later releases will have a better system. Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 2a4cdceeb57..8d1fd6dc22a 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2976,10 +2976,10 @@ static int maybe_allocate_chunk(struct btrfs_root *root, free_space = btrfs_super_total_bytes(disk_super); /* - * we allow the metadata to grow to a max of either 5gb or 5% of the + * we allow the metadata to grow to a max of either 10gb or 5% of the * space in the volume. */ - min_metadata = min((u64)5 * 1024 * 1024 * 1024, + min_metadata = min((u64)10 * 1024 * 1024 * 1024, div64_u64(free_space * 5, 100)); if (info->total_bytes >= min_metadata) { spin_unlock(&info->lock); -- GitLab From a6dbd429d8dd3382bbd9594b8d2ec74843a260d9 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 11 Nov 2009 15:53:34 -0500 Subject: [PATCH 0756/1165] Btrfs: fix panic when trying to destroy a newly allocated There is a problem where iget5_locked will look for an inode, not find it, and then subsequently try to allocate it. Another CPU will have raced in and allocated the inode instead, so when iget5_locked gets the inode spin lock again and does a search, it finds the new inode. So it goes ahead and calls destroy_inode on the inode it just allocated. The problem is we don't set BTRFS_I(inode)->root until the new inode is completely initialized. This patch makes us set root to NULL when alloc'ing a new inode, so when we get to btrfs_destroy_inode and we see that root is NULL we can just free up the memory and continue on. This fixes the panic http://www.kerneloops.org/submitresult.php?number=812690 Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d3d7d46a6af..ee92801fc5d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -5180,6 +5180,7 @@ struct inode *btrfs_alloc_inode(struct super_block *sb) ei->logged_trans = 0; ei->outstanding_extents = 0; ei->reserved_extents = 0; + ei->root = NULL; spin_lock_init(&ei->accounting_lock); btrfs_ordered_inode_tree_init(&ei->ordered_tree); INIT_LIST_HEAD(&ei->i_orphan); @@ -5195,6 +5196,14 @@ void btrfs_destroy_inode(struct inode *inode) WARN_ON(!list_empty(&inode->i_dentry)); WARN_ON(inode->i_data.nrpages); + /* + * This can happen where we create an inode, but somebody else also + * created the same inode and we need to destroy the one we already + * created. + */ + if (!root) + goto free; + /* * Make sure we're properly removed from the ordered operation * lists. @@ -5230,6 +5239,7 @@ void btrfs_destroy_inode(struct inode *inode) } inode_tree_del(inode); btrfs_drop_extent_cache(inode, 0, (u64)-1, 0); +free: kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode)); } -- GitLab From 404291ac9e72d118fcadeb939a69b2caa0a0e9ca Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 11 Nov 2009 13:32:29 -0800 Subject: [PATCH 0757/1165] btusb bluetooth driver: wait for 'waker' work too before closing Rafael debugged a resume-time hang (with oopses in workqueue handling) on his laptop that was due to the 'waker' workqueue entry being disconnected and then released without the workqueue entry having been synchronized. Several people were involved, with Oleg Nesterov doing a debugging patch showing what workqueue entry was corrupt etc. This was a regression introduced by commit 7bee549e19 ("Bluetooth: Add USB autosuspend support to btusb driver") as Rafael points out (not actually bisected, but it became clear once the bug was found). Tested-and-reported-by: Rafael J. Wysocki Acked-by: Oliver Neukum Cc: Oleg Nesterov Cc: Tejun Heo Cc: Marcel Holtmann Signed-off-by: Linus Torvalds --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 7ba91aa3fe8..2fb38027f3b 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -591,6 +591,7 @@ static int btusb_close(struct hci_dev *hdev) return 0; cancel_work_sync(&data->work); + cancel_work_sync(&data->waker); clear_bit(BTUSB_ISOC_RUNNING, &data->flags); clear_bit(BTUSB_BULK_RUNNING, &data->flags); -- GitLab From b029839cf1f3aa095de73aa2acc241f1c65201ab Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Wed, 11 Nov 2009 11:00:38 -0800 Subject: [PATCH 0758/1165] omap3: Decrease cpufreq transition latency Adjust OMAP3 frequency transition latency from 10,000,000uS to a more reasonable 300,000uS. This causes ondemand and conservative governors to sample CPU load more often resulting in more responsive behavior. Tested on Android 2.6.29; using this value and conservative governor, CORE power consumption on Zoom2 was comparable to the old and unresponsive 10,000,000uS value while UI responsiveness was greatly improved. Signed-off-by: Mike Turquette Signed-off-by: Kevin Hilman Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/cpu-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c index 1868c0d8f9b..341235c278a 100644 --- a/arch/arm/plat-omap/cpu-omap.c +++ b/arch/arm/plat-omap/cpu-omap.c @@ -127,7 +127,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy) } /* FIXME: what's the actual transition time? */ - policy->cpuinfo.transition_latency = 10 * 1000 * 1000; + policy->cpuinfo.transition_latency = 300 * 1000; return 0; } -- GitLab From 5e8651060cea6b44844521ddcac665e2c021f5d8 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 12 Nov 2009 12:08:04 +1100 Subject: [PATCH 0759/1165] md: factor out updating of 'recovery_offset'. Each device has its own 'recovery_offset' showing how far recovery has progressed on the device. As the only real significance of this is that fact that it can be stored in the metadata and recovered at restart, and as only 1.x metadata can do this, we were only updating 'recovery_offset' to 'curr_resync_completed' when updating v1.x metadata. But this is wrong, and we will shortly make limited use of this field in v0.90 metadata. So move the update into common code. Signed-off-by: NeilBrown --- drivers/md/md.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index e64c971038d..01b9a0fd16e 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1382,8 +1382,6 @@ static void super_1_sync(mddev_t *mddev, mdk_rdev_t *rdev) if (rdev->raid_disk >= 0 && !test_bit(In_sync, &rdev->flags)) { - if (mddev->curr_resync_completed > rdev->recovery_offset) - rdev->recovery_offset = mddev->curr_resync_completed; if (rdev->recovery_offset > 0) { sb->feature_map |= cpu_to_le32(MD_FEATURE_RECOVERY_OFFSET); @@ -1917,6 +1915,14 @@ static void sync_sbs(mddev_t * mddev, int nospares) */ mdk_rdev_t *rdev; + /* First make sure individual recovery_offsets are correct */ + list_for_each_entry(rdev, &mddev->disks, same_set) { + if (rdev->raid_disk >= 0 && + !test_bit(In_sync, &rdev->flags) && + mddev->curr_resync_completed > rdev->recovery_offset) + rdev->recovery_offset = mddev->curr_resync_completed; + + } list_for_each_entry(rdev, &mddev->disks, same_set) { if (rdev->sb_events == mddev->events || (nospares && -- GitLab From e8bb910d1bbc65e7081e73aab4b3a3dd8630332c Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Wed, 4 Nov 2009 15:59:34 -0700 Subject: [PATCH 0760/1165] intel-iommu: Obey coherent_dma_mask for alloc_coherent on passthrough The model for IOMMU passthrough is that decent devices that can cope with DMA to all of memory get passthrough; crappy devices with a limited dma_mask don't -- they get to use the IOMMU anyway. This is done on the basis that IOMMU passthrough is usually wanted for performance reasons, and it's only the decent PCI devices that you really care about performance for, while the crappy 32-bit ones like your USB controller can just use the IOMMU and you won't really care. Unfortunately, the check for this was only looking at dev->dma_mask, not at dev->coherent_dma_mask. And some devices have a 32-bit coherent_dma_mask even though they have a full 64-bit dma_mask. Even more unfortunately, fixing that simple oversight would upset certain broken HP devices. Not only do they have a 32-bit coherent_dma_mask, but they also have a tendency to do stray DMA to unmapped addresses. And then they die when they take the DMA fault they so richly deserve. So if we do the 'correct' fix, it'll mean that affected users have to disable IOMMU support completely on "a large percentage of servers from a major vendor." Personally, I have little sympathy -- given that this is the _same_ 'major vendor' who is shipping machines which claim to have IOMMU support but have obviously never _once_ booted a VT-d capable OS to do any form of QA. But strictly speaking, it _would_ be a regression even though it only ever worked by fluke. For 2.6.33, we'll come up with a quirk which gives swiotlb support for this particular device, and other devices with an inadequate coherent_dma_mask will just get normal IOMMU mapping. The simplest fix for 2.6.32, though, is just to jump through some hoops to try to allocate coherent DMA memory for such devices in a place that they can reach. We'd use dma_generic_alloc_coherent() for this if it existed on IA64. Signed-off-by: Alex Williamson Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index b1e97e68250..7fe5f7920ca 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -2767,7 +2767,15 @@ static void *intel_alloc_coherent(struct device *hwdev, size_t size, size = PAGE_ALIGN(size); order = get_order(size); - flags &= ~(GFP_DMA | GFP_DMA32); + + if (!iommu_no_mapping(hwdev)) + flags &= ~(GFP_DMA | GFP_DMA32); + else if (hwdev->coherent_dma_mask < dma_get_required_mask(hwdev)) { + if (hwdev->coherent_dma_mask < DMA_BIT_MASK(32)) + flags |= GFP_DMA; + else + flags |= GFP_DMA32; + } vaddr = (void *)__get_free_pages(flags, order); if (!vaddr) -- GitLab From 99dcadede42f8898d4c963ef69192ef4b9b76ba8 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Wed, 11 Nov 2009 07:23:06 -0800 Subject: [PATCH 0761/1165] intel-iommu: Support PCIe hot-plug To support PCIe hot plug in IOMMU, we register a notifier to respond to device change action. When the notifier gets BUS_NOTIFY_UNBOUND_DRIVER, it removes the device from its DMAR domain. A hot added device will be added into an IOMMU domain when it first does IOMMU op. So there is no need to add more code for hot add. Without the patch, after a hot-remove, a hot-added device on the same slot will not work. Signed-off-by: Fenghua Yu Tested-by: Yinghai Lu Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 7fe5f7920ca..1840a0578a4 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -3215,6 +3215,33 @@ static int __init init_iommu_sysfs(void) } #endif /* CONFIG_PM */ +/* + * Here we only respond to action of unbound device from driver. + * + * Added device is not attached to its DMAR domain here yet. That will happen + * when mapping the device to iova. + */ +static int device_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct device *dev = data; + struct pci_dev *pdev = to_pci_dev(dev); + struct dmar_domain *domain; + + domain = find_domain(pdev); + if (!domain) + return 0; + + if (action == BUS_NOTIFY_UNBOUND_DRIVER && !iommu_pass_through) + domain_remove_one_dev_info(domain, pdev); + + return 0; +} + +static struct notifier_block device_nb = { + .notifier_call = device_notifier, +}; + int __init intel_iommu_init(void) { int ret = 0; @@ -3267,6 +3294,8 @@ int __init intel_iommu_init(void) register_iommu(&intel_iommu_ops); + bus_register_notifier(&pci_bus_type, &device_nb); + return 0; } -- GitLab From 46ef6ec9da420b298b1f197e445bf5b06fe01ef4 Mon Sep 17 00:00:00 2001 From: Daniel T Chen Date: Wed, 11 Nov 2009 14:32:10 -0500 Subject: [PATCH 0762/1165] ALSA: hda: Use model=mb5 for MacBookPro 5,2 BugLink: https://bugs.launchpad.net/bugs/462098 Until we can look closer at the verbs, let's use ALC885_MB5 for codec SSID 0x106b4600 to enable playback and capture for MacBookPro 5,2s. Signed-off-by: Daniel T Chen Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index daf6975b0c2..84a52efdb2d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8911,10 +8911,11 @@ static struct snd_pci_quirk alc882_ssid_cfg_tbl[] = { SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3), SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24), SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5), - /* FIXME: HP jack sense seems not working for MBP 5,1, so apparently - * no perfect solution yet + /* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2, + * so apparently no perfect solution yet */ SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5), + SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC885_MB5), {} /* terminator */ }; -- GitLab From ff5e4b51a397568c6a2901903c35a4bfaaf752a4 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 12 Nov 2009 09:53:50 +0100 Subject: [PATCH 0763/1165] fs/jbd: Export log_start_commit to fix ext3 build. This fixes: ERROR: "log_start_commit" [fs/ext3/ext3.ko] undefined! Signed-off-by: Stefan Schmidt --- fs/jbd/journal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index 49d5cd6053c..4160afad6d0 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -73,6 +73,7 @@ EXPORT_SYMBOL(journal_errno); EXPORT_SYMBOL(journal_ack_err); EXPORT_SYMBOL(journal_clear_err); EXPORT_SYMBOL(log_wait_commit); +EXPORT_SYMBOL(log_start_commit); EXPORT_SYMBOL(journal_start_commit); EXPORT_SYMBOL(journal_force_commit_nested); EXPORT_SYMBOL(journal_wipe); -- GitLab From c62b17a58ab5e97534ff6487241addd5fcc606de Mon Sep 17 00:00:00 2001 From: Romit Dasgupta Date: Thu, 12 Nov 2009 13:08:11 +0100 Subject: [PATCH 0764/1165] Thaw refrigerated bdi flusher threads before invoking kthread_stop on them Unfreezes the bdi flusher task when the said task needs to exit. Steps to reproduce this. 1) Mount a file system from MMC/SD card. 2) Unmount the file system. This creates a flusher task. 3) Attempt suspend to RAM. System is unresponsive. This is because the bdi flusher thread is already in the refrigerator and will remain so until it is thawed. The MMC driver suspend routine call stack will ultimately issue a 'kthread_stop' on the bdi flusher thread and will block until the flusher thread is exited. Since the bdi flusher thread is in the refrigerator it never cleans up until thawed. Signed-off-by: Romit Dasgupta Signed-off-by: Jens Axboe --- mm/backing-dev.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/mm/backing-dev.c b/mm/backing-dev.c index 11aee09dd2a..67a33a5a1a9 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -604,10 +604,14 @@ static void bdi_wb_shutdown(struct backing_dev_info *bdi) /* * Finally, kill the kernel threads. We don't need to be RCU - * safe anymore, since the bdi is gone from visibility. + * safe anymore, since the bdi is gone from visibility. Force + * unfreeze of the thread before calling kthread_stop(), otherwise + * it would never exet if it is currently stuck in the refrigerator. */ - list_for_each_entry(wb, &bdi->wb_list, list) + list_for_each_entry(wb, &bdi->wb_list, list) { + wb->task->flags &= ~PF_FROZEN; kthread_stop(wb->task); + } } /* -- GitLab From 52e650407d709fd02091f0d735434def96a545bc Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:09 -0800 Subject: [PATCH 0765/1165] MAINTAINERS: ASUS ACPI EXTRAS - remove F:arch/x86/kernel/acpi/boot.c Oops. How did that get there? (Don't look, it's my original pattern commit...) Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 8264e6bddaa..ba8ded198b2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -906,7 +906,6 @@ M: Karol Kozimor L: acpi4asus-user@lists.sourceforge.net W: http://acpi4asus.sf.net S: Maintained -F: arch/x86/kernel/acpi/boot.c F: drivers/platform/x86/asus_acpi.c ASUS ASB100 HARDWARE MONITOR DRIVER -- GitLab From 455518e7b5ff53478821fe9185531e0a2135d076 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:10 -0800 Subject: [PATCH 0766/1165] MAINTAINERS: BROCADE BFA - Use single line M: and tabs Integrate P:/M: to single M: Use tab for spacing Signed-off-by: Joe Perches Cc: Jing Huang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index ba8ded198b2..b6bcc2f1408 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1244,11 +1244,10 @@ S: Supported F: drivers/net/tg3.* BROCADE BFA FC SCSI DRIVER -P: Jing Huang -M: huangj@brocade.com -L: linux-scsi@vger.kernel.org -S: Supported -F: drivers/scsi/bfa/ +M: Jing Huang +L: linux-scsi@vger.kernel.org +S: Supported +F: drivers/scsi/bfa/ BSG (block layer generic sg v4 driver) M: FUJITA Tomonori -- GitLab From 3387f656309dd427023c7e00cad901a89d40bc1c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:11 -0800 Subject: [PATCH 0767/1165] MAINTAINERS: SERVER ENGINES 10Gbps iSCSI - Use single line M: Integrate P:/M: lines to single M: Use tabs not spaces Signed-off-by: Joe Perches Cc: Jayamohan Kallickal Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index b6bcc2f1408..e5d11054e78 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4671,12 +4671,11 @@ F: include/linux/ata.h F: include/linux/libata.h SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER -P: Jayamohan Kallickal -M: jayamohank@serverengines.com -L: linux-scsi@vger.kernel.org -W: http://www.serverengines.com -S: Supported -F: drivers/scsi/be2iscsi/ +M: Jayamohan Kallickal +L: linux-scsi@vger.kernel.org +W: http://www.serverengines.com +S: Supported +F: drivers/scsi/be2iscsi/ SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER M: Sathya Perla -- GitLab From 65c8bb5b9f25d869b814ca4238935a2e609f81cf Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:12 -0800 Subject: [PATCH 0768/1165] MAINTAINERS: VMWARE VMXNET3 - Quote name with comma and period, use tabs Names with periods or commas need to be quoted Use tab not spaces Signed-off-by: Joe Perches Cc: Shreyas Bhatewara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index e5d11054e78..5577259911d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5681,11 +5681,11 @@ F: drivers/vlynq/vlynq.c F: include/linux/vlynq.h VMWARE VMXNET3 ETHERNET DRIVER -M: Shreyas Bhatewara -M: VMware, Inc. -L: netdev@vger.kernel.org -S: Maintained -F: drivers/net/vmxnet3/ +M: Shreyas Bhatewara +M: "VMware, Inc." +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/vmxnet3/ VOLTAGE AND CURRENT REGULATOR FRAMEWORK M: Liam Girdwood -- GitLab From 3bd7bf5f1aabf5d5e6b8ee60360dc52259a83118 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 11 Nov 2009 14:26:13 -0800 Subject: [PATCH 0769/1165] get_maintainer: fix usage comment With the `s' it just won't work. Signed-off-by: Roel Kluin Acked-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/get_maintainer.pl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl index 102b76608f3..81a67a458e7 100755 --- a/scripts/get_maintainer.pl +++ b/scripts/get_maintainer.pl @@ -5,8 +5,8 @@ # Print selected MAINTAINERS information for # the files modified in a patch or for a file # -# usage: perl scripts/get_maintainers.pl [OPTIONS] -# perl scripts/get_maintainers.pl [OPTIONS] -f +# usage: perl scripts/get_maintainer.pl [OPTIONS] +# perl scripts/get_maintainer.pl [OPTIONS] -f # # Licensed under the terms of the GNU GPL License version 2 -- GitLab From b0c9065324b7c1242b97b27a1407da18471b9b23 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 11 Nov 2009 14:26:13 -0800 Subject: [PATCH 0770/1165] MAINTAINERS: openipmi list is moderated openipmi list is moderated. Signed-off-by: Randy Dunlap Acked-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 5577259911d..bdbfdcdbee0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2823,7 +2823,7 @@ F: drivers/infiniband/hw/ipath/ IPMI SUBSYSTEM M: Corey Minyard -L: openipmi-developer@lists.sourceforge.net +L: openipmi-developer@lists.sourceforge.net (moderated for non-subscribers) W: http://openipmi.sourceforge.net/ S: Supported F: Documentation/IPMI.txt -- GitLab From cc4a6851466039a8a688c843962a05689059ff3b Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 11 Nov 2009 14:26:14 -0800 Subject: [PATCH 0771/1165] page allocator: always wake kswapd when restarting an allocation attempt after direct reclaim failed If a direct reclaim makes no forward progress, it considers whether it should go OOM or not. Whether OOM is triggered or not, it may retry the allocation afterwards. In times past, this would always wake kswapd as well but currently, kswapd is not woken up after direct reclaim fails. For order-0 allocations, this makes little difference but if there is a heavy mix of higher-order allocations that direct reclaim is failing for, it might mean that kswapd is not rewoken for higher orders as much as it did previously. This patch wakes up kswapd when an allocation is being retried after a direct reclaim failure. It would be expected that kswapd is already awake, but this has the effect of telling kswapd to reclaim at the higher order as well. Signed-off-by: Mel Gorman Reviewed-by: Christoph Lameter Reviewed-by: Pekka Enberg Reviewed-by: KOSAKI Motohiro Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index cdcedf66161..250d0552a92 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1817,9 +1817,9 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, if (NUMA_BUILD && (gfp_mask & GFP_THISNODE) == GFP_THISNODE) goto nopage; +restart: wake_all_kswapd(order, zonelist, high_zoneidx); -restart: /* * OK, we're below the kswapd watermark and have kicked background * reclaim. Now things get more complex, so set up alloc_flags according -- GitLab From 9d0ed60fe9cd1fbf57f755cd27a23ae9114d7210 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 11 Nov 2009 14:26:17 -0800 Subject: [PATCH 0772/1165] page allocator: Do not allow interrupts to use ALLOC_HARDER Commit 341ce06f69abfafa31b9468410a13dbd60e2b237 ("page allocator: calculate the alloc_flags for allocation only once") altered watermark logic slightly by allowing rt_tasks that are handling an interrupt to set ALLOC_HARDER. This patch brings the watermark logic more in line with 2.6.30. This change results in a reduction of the number high-order GFP_ATOMIC allocation failures reported. See http://www.gossamer-threads.com/lists/linux/kernel/1144153 [rientjes@google.com: Spotted the problem] Signed-off-by: Mel Gorman Reviewed-by: Pekka Enberg Reviewed-by: Rik van Riel Reviewed-by: KOSAKI Motohiro Cc: David Rientjes Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 250d0552a92..2bc2ac63f41 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1769,7 +1769,7 @@ gfp_to_alloc_flags(gfp_t gfp_mask) * See also cpuset_zone_allowed() comment in kernel/cpuset.c. */ alloc_flags &= ~ALLOC_CPUSET; - } else if (unlikely(rt_task(p))) + } else if (unlikely(rt_task(p)) && !in_interrupt()) alloc_flags |= ALLOC_HARDER; if (likely(!(gfp_mask & __GFP_NOMEMALLOC))) { -- GitLab From f5c15d0b37ab1cd3969b8ce7828ab41c79f36f77 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 11 Nov 2009 14:26:22 -0800 Subject: [PATCH 0773/1165] fb: remove fb_save_state() and fb_restore_state operations Remove fb_save_state() and fb_restore_state operations from frame buffer layer. They are used only in two drivers: 1. savagefb - and cause bug #11248 2. uvesafb Usage of these operations is misunderstood in both drivers so kill these operations, fix the bug #11248 and avoid confusion in the future. Tested on Savage 3D/MV card and the patch fixes the bug #11248. The frame buffer layer uses these funtions during switch between graphics and text mode of the console, but these drivers saves state before switching of the frame buffer (in the fb_open) and after releasing it (in the fb_release). This defeats the purpose of these operations. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11248 Signed-off-by: Krzysztof Helt Reported-by: Jochen Hein Tested-by: Jochen Hein Cc: Geert Uytterhoeven Cc: Michal Januszewski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atafb.c | 6 ------ drivers/video/console/fbcon.c | 5 +---- drivers/video/savage/savagefb_driver.c | 18 ----------------- drivers/video/uvesafb.c | 28 -------------------------- include/linux/fb.h | 6 ------ 5 files changed, 1 insertion(+), 62 deletions(-) diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 8cd279be74e..37624f74e88 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -329,12 +329,6 @@ extern unsigned char fontdata_8x16[]; * * * perform fb specific mmap * * int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma); - * - * * save current hardware state * - * void (*fb_save_state)(struct fb_info *info); - * - * * restore saved state * - * void (*fb_restore_state)(struct fb_info *info); * } ; */ diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 5a686cea23f..3681c6a8821 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2311,14 +2311,11 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) ops->graphics = 1; if (!blank) { - if (info->fbops->fb_save_state) - info->fbops->fb_save_state(info); var.activate = FB_ACTIVATE_NOW | FB_ACTIVATE_FORCE; fb_set_var(info, &var); ops->graphics = 0; ops->var = info->var; - } else if (info->fbops->fb_restore_state) - info->fbops->fb_restore_state(info); + } } if (!fbcon_is_inactive(vc, info)) { diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c index 37b135d5d12..0857b3b8c49 100644 --- a/drivers/video/savage/savagefb_driver.c +++ b/drivers/video/savage/savagefb_driver.c @@ -1606,22 +1606,6 @@ static int savagefb_blank(int blank, struct fb_info *info) return (blank == FB_BLANK_NORMAL) ? 1 : 0; } -static void savagefb_save_state(struct fb_info *info) -{ - struct savagefb_par *par = info->par; - - savage_get_default_par(par, &par->save); -} - -static void savagefb_restore_state(struct fb_info *info) -{ - struct savagefb_par *par = info->par; - - savagefb_blank(FB_BLANK_POWERDOWN, info); - savage_set_default_par(par, &par->save); - savagefb_blank(FB_BLANK_UNBLANK, info); -} - static int savagefb_open(struct fb_info *info, int user) { struct savagefb_par *par = info->par; @@ -1667,8 +1651,6 @@ static struct fb_ops savagefb_ops = { .fb_setcolreg = savagefb_setcolreg, .fb_pan_display = savagefb_pan_display, .fb_blank = savagefb_blank, - .fb_save_state = savagefb_save_state, - .fb_restore_state = savagefb_restore_state, #if defined(CONFIG_FB_SAVAGE_ACCEL) .fb_fillrect = savagefb_fillrect, .fb_copyarea = savagefb_copyarea, diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c index e35232a1857..54fbb2995a5 100644 --- a/drivers/video/uvesafb.c +++ b/drivers/video/uvesafb.c @@ -1411,23 +1411,6 @@ static int uvesafb_check_var(struct fb_var_screeninfo *var, return 0; } -static void uvesafb_save_state(struct fb_info *info) -{ - struct uvesafb_par *par = info->par; - - if (par->vbe_state_saved) - kfree(par->vbe_state_saved); - - par->vbe_state_saved = uvesafb_vbe_state_save(par); -} - -static void uvesafb_restore_state(struct fb_info *info) -{ - struct uvesafb_par *par = info->par; - - uvesafb_vbe_state_restore(par, par->vbe_state_saved); -} - static struct fb_ops uvesafb_ops = { .owner = THIS_MODULE, .fb_open = uvesafb_open, @@ -1441,8 +1424,6 @@ static struct fb_ops uvesafb_ops = { .fb_imageblit = cfb_imageblit, .fb_check_var = uvesafb_check_var, .fb_set_par = uvesafb_set_par, - .fb_save_state = uvesafb_save_state, - .fb_restore_state = uvesafb_restore_state, }; static void __devinit uvesafb_init_info(struct fb_info *info, @@ -1459,15 +1440,6 @@ static void __devinit uvesafb_init_info(struct fb_info *info, info->fix.ypanstep = par->ypan ? 1 : 0; info->fix.ywrapstep = (par->ypan > 1) ? 1 : 0; - /* - * If we were unable to get the state buffer size, disable - * functions for saving and restoring the hardware state. - */ - if (par->vbe_state_size == 0) { - info->fbops->fb_save_state = NULL; - info->fbops->fb_restore_state = NULL; - } - /* Disable blanking if the user requested so. */ if (!blank) info->fbops->fb_blank = NULL; diff --git a/include/linux/fb.h b/include/linux/fb.h index a34bdf5a9d2..de9c722e7b9 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -669,12 +669,6 @@ struct fb_ops { /* perform fb specific mmap */ int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma); - /* save current hardware state */ - void (*fb_save_state)(struct fb_info *info); - - /* restore saved state */ - void (*fb_restore_state)(struct fb_info *info); - /* get capability given var */ void (*fb_get_caps)(struct fb_info *info, struct fb_blit_caps *caps, struct fb_var_screeninfo *var); -- GitLab From b9f9d4706cb1b706f89f98ea6ead41ebecdefbc2 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 11 Nov 2009 14:26:25 -0800 Subject: [PATCH 0774/1165] savagefb: fix blanking mode on CRT display Fix wrong bit mask for blanking register. Due to the error a CRT monitor blanks off due to wrong frequency (out of range) instead of PM signal (vertical and horizontal frequencies cut off). Just compare the mask with bits set in the switch(blank) clause below the changed line. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/savage/savagefb_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c index 0857b3b8c49..842d157e102 100644 --- a/drivers/video/savage/savagefb_driver.c +++ b/drivers/video/savage/savagefb_driver.c @@ -1565,7 +1565,7 @@ static int savagefb_blank(int blank, struct fb_info *info) vga_out8(0x3c5, sr8, par); vga_out8(0x3c4, 0x0d, par); srd = vga_in8(0x3c5, par); - srd &= 0x03; + srd &= 0x50; switch (blank) { case FB_BLANK_UNBLANK: -- GitLab From e00e431612c3a6e437a01f2129fd3843da0c982a Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Wed, 11 Nov 2009 14:26:26 -0800 Subject: [PATCH 0775/1165] memcg: fix wrong pointer initialization at page migration when memcg is disabled. Lee Schermerhorn reported that he saw bad pointer dereference in mem_cgroup_end_migration() when he disabled memcg by boot option. memcg's page migration logic works as mem_cgroup_prepare_migration(page, &ptr); do page migration mem_cgroup_end_migration(page, ptr); Now, ptr is not initialized in prepare_migration when memcg is disabled by boot option. This causes panic in end_migration. This patch fixes it. Reported-by: Lee Schermerhorn Cc: Balbir Singh Signed-off-by: KAMEZAWA Hiroyuki Reviewed-by: Daisuke Nishimura Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index 1a4bf481378..7dbcb22316d 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -602,7 +602,7 @@ static int unmap_and_move(new_page_t get_new_page, unsigned long private, struct page *newpage = get_new_page(page, private, &result); int rcu_locked = 0; int charge = 0; - struct mem_cgroup *mem; + struct mem_cgroup *mem = NULL; if (!newpage) return -ENOMEM; -- GitLab From 71ccb83cfc487354d2647e315c8196e5872198ab Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 11 Nov 2009 14:26:27 -0800 Subject: [PATCH 0776/1165] alpha: fix F_SETOWN_EX and F_GETLK64 conflict Fix a bug in commit ba0a6c9f6fceed11c6a99e8326f0477fe383e6b5 Author: Peter Zijlstra AuthorDate: Wed Sep 23 15:57:03 2009 -0700 Commit: Linus Torvalds CommitDate: Thu Sep 24 07:21:01 2009 -0700 fcntl: add F_[SG]ETOWN_EX In asm-generic/fcntl.h, F_SETOWN_EX and F_GETLK64 both have value 12, and F_GETOWN_EX and F_SETLK64 both have value 13. Reported-by: "Joseph S. Myers" Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Andreas Schwab Signed-off-by: Peter Zijlstra Acked-by: Ulrich Drepper Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/fcntl.h | 4 ++-- include/asm-generic/fcntl.h | 19 +++++++++++-------- 2 files changed, 13 insertions(+), 10 deletions(-) diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h index e42823e954a..73126e4dd63 100644 --- a/arch/alpha/include/asm/fcntl.h +++ b/arch/alpha/include/asm/fcntl.h @@ -26,8 +26,8 @@ #define F_GETOWN 6 /* for sockets. */ #define F_SETSIG 10 /* for sockets. */ #define F_GETSIG 11 /* for sockets. */ -#define F_SETOWN_EX 12 -#define F_GETOWN_EX 13 +#define F_SETOWN_EX 15 +#define F_GETOWN_EX 16 /* for posix fcntl() and lockf() */ #define F_RDLCK 1 diff --git a/include/asm-generic/fcntl.h b/include/asm-generic/fcntl.h index 0c3dd860392..cd2d7896e34 100644 --- a/include/asm-generic/fcntl.h +++ b/include/asm-generic/fcntl.h @@ -73,9 +73,18 @@ #define F_SETSIG 10 /* for sockets. */ #define F_GETSIG 11 /* for sockets. */ #endif + +#ifndef CONFIG_64BIT +#ifndef F_GETLK64 +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 +#endif +#endif + #ifndef F_SETOWN_EX -#define F_SETOWN_EX 12 -#define F_GETOWN_EX 13 +#define F_SETOWN_EX 15 +#define F_GETOWN_EX 16 #endif #define F_OWNER_TID 0 @@ -139,12 +148,6 @@ struct flock { #ifndef CONFIG_64BIT -#ifndef F_GETLK64 -#define F_GETLK64 12 /* using 'struct flock64' */ -#define F_SETLK64 13 -#define F_SETLKW64 14 -#endif - #ifndef HAVE_ARCH_STRUCT_FLOCK64 #ifndef __ARCH_FLOCK64_PAD #define __ARCH_FLOCK64_PAD -- GitLab From 15f3c476589c8778b0c10f1fb5160f9107c69556 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 11 Nov 2009 14:26:30 -0800 Subject: [PATCH 0777/1165] alpha: move THREAD_SIZE definition outside #ifndef ASSEMBLY arch/alpha/kernel/vmlinux.lds.S uses it: arch/alpha/kernel/vmlinux.lds:241: undefined symbol `THREAD_SIZE' referenced in expression Seems to have been caused by commit 9d93f00580243cc059510d9d6ac4d2f5e97e5b83 Author: Geoffrey Thomas AuthorDate: Thu Sep 24 10:36:26 2009 -0400 Commit: Linus Torvalds CommitDate: Thu Sep 24 17:16:22 2009 -0700 alpha: Clean up linker script using new linker script macros. Note that .data.page_aligned and .data.cacheline_aligned are now after _data; it was probably a bug that they were before it. Also, some explicit ALIGN(8)'s between various initcall sections were removed; this should be harmless as the implicit alignment of initcall_t was already 8. Cc: Geoffrey Thomas Cc: Tim Abbott Cc: Ivan Kokshaysky Cc: Sam Ravnborg Cc: Richard Henderson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/thread_info.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 5076a8860b1..815680b585e 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -50,12 +50,12 @@ struct thread_info { register struct thread_info *__current_thread_info __asm__("$8"); #define current_thread_info() __current_thread_info +#endif /* __ASSEMBLY__ */ + /* Thread information allocation. */ #define THREAD_SIZE_ORDER 1 #define THREAD_SIZE (2*PAGE_SIZE) -#endif /* __ASSEMBLY__ */ - #define PREEMPT_ACTIVE 0x40000000 /* -- GitLab From 29f12ca32122db98481150be09d35bd72b68045e Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Wed, 11 Nov 2009 14:26:32 -0800 Subject: [PATCH 0778/1165] pidns: fix a leak in /proc dentries and inodes with pid namespaces. Daniel Lezcano reported a leak in 'struct pid' and 'struct pid_namespace' that is discussed in: http://lkml.org/lkml/2009/10/2/159. To summarize the thread, when container-init is terminated, it sets the PF_EXITING flag, zaps other processes in the container and waits to reap them. As a part of reaping, the container-init should flush any /proc dentries associated with the processes. But because the container-init is itself exiting and the following PF_EXITING check, the dentries are not flushed, resulting in leak in /proc inodes and dentries. This fix reverts the commit 7766755a2f249e7e0 ("Fix /proc dcache deadlock in do_exit") which introduced the check for PF_EXITING. At the time of the commit, shrink_dcache_parent() flushed dentries from other filesystems also and could have caused a deadlock which the commit fixed. But as pointed out by Eric Biederman, after commit 0feae5c47aabdde59, shrink_dcache_parent() no longer affects other filesystems. So reverting the commit is now safe. As pointed out by Jan Kara, the leak is not as critical since the unclaimed space will be reclaimed under memory pressure or by: echo 3 > /proc/sys/vm/drop_caches But since this check is no longer required, its best to remove it. Signed-off-by: Sukadev Bhattiprolu Reported-by: Daniel Lezcano Acked-by: Eric W. Biederman Acked-by: Jan Kara Cc: Andrea Arcangeli Cc: Serge Hallyn Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/proc/base.c b/fs/proc/base.c index 837469a9659..af643b5aefe 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2597,8 +2597,7 @@ static void proc_flush_task_mnt(struct vfsmount *mnt, pid_t pid, pid_t tgid) name.len = snprintf(buf, sizeof(buf), "%d", pid); dentry = d_hash_and_lookup(mnt->mnt_root, &name); if (dentry) { - if (!(current->flags & PF_EXITING)) - shrink_dcache_parent(dentry); + shrink_dcache_parent(dentry); d_drop(dentry); dput(dentry); } -- GitLab From 7779d7bed950a7fb1af4f540c2f82a6b81b65901 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 11 Nov 2009 14:26:34 -0800 Subject: [PATCH 0779/1165] fs: add missing compat_ptr handling for FS_IOC_RESVSP ioctl For FS_IOC_RESVSP and FS_IOC_RESVSP64 compat_sys_ioctl() uses its arg argument as a pointer to userspace. However it is missing a a call to compat_ptr() which will do a proper pointer conversion. This was introduced with 3e63cbb1 "fs: Add new pre-allocation ioctls to vfs for compatibility with legacy xfs ioctls". Signed-off-by: Heiko Carstens Cc: Ankit Jain Acked-by: Christoph Hellwig Cc: Al Viro Acked-by: Arnd Bergmann Acked-by: David S. Miller Cc: [2.6.31.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/compat_ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index f91fd51b32e..d84e7058c29 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -1800,7 +1800,7 @@ struct space_resv_32 { /* just account for different alignment */ static int compat_ioctl_preallocate(struct file *file, unsigned long arg) { - struct space_resv_32 __user *p32 = (void __user *)arg; + struct space_resv_32 __user *p32 = compat_ptr(arg); struct space_resv __user *p = compat_alloc_user_space(sizeof(*p)); if (copy_in_user(&p->l_type, &p32->l_type, sizeof(s16)) || @@ -2802,7 +2802,7 @@ asmlinkage long compat_sys_ioctl(unsigned int fd, unsigned int cmd, #else case FS_IOC_RESVSP: case FS_IOC_RESVSP64: - error = ioctl_preallocate(filp, (void __user *)arg); + error = ioctl_preallocate(filp, compat_ptr(arg)); goto out_fput; #endif -- GitLab From 431861cfab0c8613f83bac0f41dae22ff74f9bc1 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 11 Nov 2009 14:26:35 -0800 Subject: [PATCH 0780/1165] atmel_lcdfb: new alternate pixel clock formula at91sam9g45 non ES lots have an alternate pixel clock calculation formula. Introduce this one with condition on the cpu_is_xxxxx() macros. Newer 9g45 SOC will not have good pixel clock calculation without this fix. Signed-off-by: Nicolas Ferre Cc: Krzysztof Helt Cc: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 2830ffd7297..d5e801076d3 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -484,6 +484,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) unsigned long value; unsigned long clk_value_khz; unsigned long bits_per_line; + unsigned long pix_factor = 2; might_sleep(); @@ -516,20 +517,24 @@ static int atmel_lcdfb_set_par(struct fb_info *info) /* Now, the LCDC core... */ /* Set pixel clock */ + if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es()) + pix_factor = 1; + clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock)); - if (value < 2) { + if (value < pix_factor) { dev_notice(info->device, "Bypassing pixel clock divider\n"); lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); } else { - value = (value / 2) - 1; + value = (value / pix_factor) - 1; dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value); lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET); - info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1))); + info->var.pixclock = + KHZ2PICOS(clk_value_khz / (pix_factor * (value + 1))); dev_dbg(info->device, " updated pixclk: %lu KHz\n", PICOS2KHZ(info->var.pixclock)); } -- GitLab From 265f2a057bf6b567a32bb16dc8b1765cf0555d9f Mon Sep 17 00:00:00 2001 From: Rask Ingemann Lambertsen Date: Wed, 11 Nov 2009 14:26:36 -0800 Subject: [PATCH 0781/1165] rtc: pcf50633: fix month off-by-one error The PCF50633 stores a month value of 1-12, but the kernel wants 0-11. Signed-off-by: Rask Ingemann Lambertsen Signed-off-by: Paul Fertser Cc: Paul Gortmaker Cc: Balaji Rao Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf50633.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c index f4dd87e2907..77b40ddd66e 100644 --- a/drivers/rtc/rtc-pcf50633.c +++ b/drivers/rtc/rtc-pcf50633.c @@ -70,7 +70,7 @@ static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50633_time *pcf) rtc->tm_hour = bcd2bin(pcf->time[PCF50633_TI_HOUR]); rtc->tm_wday = bcd2bin(pcf->time[PCF50633_TI_WKDAY]); rtc->tm_mday = bcd2bin(pcf->time[PCF50633_TI_DAY]); - rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]); + rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]) - 1; rtc->tm_year = bcd2bin(pcf->time[PCF50633_TI_YEAR]) + 100; } @@ -81,7 +81,7 @@ static void rtc2pcf_time(struct pcf50633_time *pcf, struct rtc_time *rtc) pcf->time[PCF50633_TI_HOUR] = bin2bcd(rtc->tm_hour); pcf->time[PCF50633_TI_WKDAY] = bin2bcd(rtc->tm_wday); pcf->time[PCF50633_TI_DAY] = bin2bcd(rtc->tm_mday); - pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon); + pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon + 1); pcf->time[PCF50633_TI_YEAR] = bin2bcd(rtc->tm_year % 100); } -- GitLab From 05f45d7d746d07c95588871abf933334856c1a3b Mon Sep 17 00:00:00 2001 From: Werner Almesberger Date: Wed, 11 Nov 2009 14:26:40 -0800 Subject: [PATCH 0782/1165] rtc: pcf50633: consider alrm->enable in pcf50633_rtc_set_alarm According to Documentation/rtc.txt, RTC_WKALM_SET sets the alarm time and enables/disables the alarm. We implement RTC_WKALM_SET through pcf50633_rtc_set_alarm. The enabling/disabling part was missing. Signed-off-by: Werner Almesberger Reported-by: Michael 'Mickey' Lauer Signed-off-by: Paul Fertser Cc: Paul Gortmaker Cc: Balaji Rao Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf50633.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c index 77b40ddd66e..33a10c47260 100644 --- a/drivers/rtc/rtc-pcf50633.c +++ b/drivers/rtc/rtc-pcf50633.c @@ -245,8 +245,9 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA, PCF50633_TI_EXTENT, &pcf_tm.time[0]); - if (!alarm_masked) + if (!alarm_masked || alrm->enabled) pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM); + rtc->alarm_enabled = alrm->enabled; return ret; } -- GitLab From 80647b959f97fa20a4714dde3e07b7f69d896556 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 11 Nov 2009 14:26:41 -0800 Subject: [PATCH 0783/1165] serial: fix printk format specifiers for struct uart_port::iobase struct uart_port::iobase is unsigned long, so use %lx as printk format specifier. Signed-off-by: Lennert Buytenhek Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 2 +- drivers/serial/8250_pci.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index b1ae774016f..737b4c96097 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1089,7 +1089,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) if (!up->port.iobase && !up->port.mapbase && !up->port.membase) return; - DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ", + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", serial_index(&up->port), up->port.iobase, up->port.membase); /* diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 42e8550cd2b..b2d65b208e5 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2383,7 +2383,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) break; #ifdef SERIAL_DEBUG_PCI - printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n", + printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", serial_port.iobase, serial_port.irq, serial_port.iotype); #endif -- GitLab From b87e5e2b8ed9336566100c8c796ab6dd52436881 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 11 Nov 2009 14:26:42 -0800 Subject: [PATCH 0784/1165] serial: add support for the Lava Quattro PCI quad-port 16550A card This seems to be a different model (with a different PCI ID) than the "Quatro" card that is also in the list. Signed-off-by: Lennert Buytenhek Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 6 ++++++ include/linux/pci_ids.h | 2 ++ 2 files changed, 8 insertions(+) diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index b2d65b208e5..b28af13c45a 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -3139,6 +3139,12 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_4_460800 }, diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9ceb392cb98..84cf1f3b783 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1956,6 +1956,8 @@ #define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */ #define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */ #define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_QUATTRO_A 0x0120 /* 2x 16550A, half of 4 port */ +#define PCI_DEVICE_ID_LAVA_QUATTRO_B 0x0121 /* 2x 16550A, half of 4 port */ #define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */ #define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */ #define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */ -- GitLab From 49c1d9da1c83b83e4ed65bb84326835cdb3e7327 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Wed, 11 Nov 2009 14:26:43 -0800 Subject: [PATCH 0785/1165] mmci-omap: free irq resource Free IRQ on remove. Signed-off-by: Ladislav Michl Acked-by: Tony Lindgren Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/omap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index e7a331de573..b8fd7af1cee 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1529,6 +1529,7 @@ static int mmc_omap_remove(struct platform_device *pdev) host->pdata->cleanup(&pdev->dev); mmc_omap_fclk_enable(host, 0); + free_irq(host->irq, host); clk_put(host->fclk); clk_disable(host->iclk); clk_put(host->iclk); -- GitLab From eeba444a5d5646553c094f79235b50e757aa1424 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:44 -0800 Subject: [PATCH 0786/1165] MAINTAINERS: correct 9P FILE SYSTEM git entry Signed-off-by: Joe Perches Cc: Latchesar Ionkov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index bdbfdcdbee0..c13e66f771c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -182,7 +182,7 @@ M: Ron Minnich M: Latchesar Ionkov L: v9fs-developer@lists.sourceforge.net W: http://swik.net/v9fs -T: git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs.git S: Maintained F: Documentation/filesystems/9p.txt F: fs/9p/ -- GitLab From 34693710601146d683018a14817f93791dfb2737 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:45 -0800 Subject: [PATCH 0787/1165] MAINTAINERS: correct NETFILTER git entry format Signed-off-by: Joe Perches Cc: Patrick McHardy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index c13e66f771c..765c3c50f81 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3616,7 +3616,7 @@ L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ -- GitLab From df69f0da187815bc116860be4a29c7c953d22c5a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 11 Nov 2009 14:26:46 -0800 Subject: [PATCH 0788/1165] MAINTAINERS: correct SECURITY SUBSYSTEM git entry Use git.kernel.org not www.kernel.org Signed-off-by: Joe Perches Cc: James Morris Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 765c3c50f81..81d68d5b7ee 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4635,7 +4635,7 @@ F: drivers/mmc/host/sdhci-s3c.c SECURITY SUBSYSTEM M: James Morris L: linux-security-module@vger.kernel.org (suggested Cc:) -T: git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git W: http://security.wiki.kernel.org/ S: Supported F: security/ -- GitLab From 93f40e6f1493ae0c1e04760b221c125ef5e47205 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 11 Nov 2009 14:26:47 -0800 Subject: [PATCH 0789/1165] fb: put framebuffer drivers back under the "frame buffer devices" menu The config FB_PRE_INIT_FB entry in drivers/video/Kconfig pushes all entries below it out of the menuconfig selection. Fix this. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 9bbb2855ea9..188e1ba3b69 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2121,7 +2121,7 @@ config FB_EP93XX config FB_PRE_INIT_FB bool "Don't reinitialize, use bootloader's GDC/Display configuration" - depends on FB_MB862XX_LIME + depends on FB && FB_MB862XX_LIME ---help--- Select this option if display contents should be inherited as set by the bootloader. -- GitLab From fc63cf237078c86214abcb2ee9926d8ad289da9b Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Wed, 11 Nov 2009 14:26:48 -0800 Subject: [PATCH 0790/1165] exec: setup_arg_pages() fails to return errors In setup_arg_pages we work hard to assign a value to ret, but on exit we always return 0. Also remove a now duplicated exit path and branch to out_unlock instead. Signed-off-by: Anton Blanchard Acked-by: Serge Hallyn Reviewed-by: WANG Cong Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/exec.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index d49be6bc179..ba112bd4a33 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -624,10 +624,8 @@ int setup_arg_pages(struct linux_binprm *bprm, /* Move stack pages down in memory. */ if (stack_shift) { ret = shift_arg_pages(vma, stack_shift); - if (ret) { - up_write(&mm->mmap_sem); - return ret; - } + if (ret) + goto out_unlock; } #ifdef CONFIG_STACK_GROWSUP @@ -641,7 +639,7 @@ int setup_arg_pages(struct linux_binprm *bprm, out_unlock: up_write(&mm->mmap_sem); - return 0; + return ret; } EXPORT_SYMBOL(setup_arg_pages); -- GitLab From 61df33370c52633b47d794f5e024eb15ca9a2efe Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 11 Nov 2009 14:26:48 -0800 Subject: [PATCH 0791/1165] rtc-vr41xx: fix do_div() warning drivers/rtc/rtc-vr41xx.c: In function 'vr41xx_rtc_irq_set_freq': drivers/rtc/rtc-vr41xx.c:217: warning: comparison of distinct pointer types lacks a cast drivers/rtc/rtc-vr41xx.c:217: warning: right shift count >= width of type drivers/rtc/rtc-vr41xx.c:217: warning: passing argument 1 of '__div64_32' from incompatible pointer type include/asm-generic/div64.h:35: note: expected 'uint64_t *' but argument is of type 'long unsigned int *' Signed-off-by: Yoichi Yuasa Cc: Alessandro Zummo Cc: Paul Gortmaker Cc: Paul Mundt Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-vr41xx.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c index 2c839d0d21b..fadddac1e5a 100644 --- a/drivers/rtc/rtc-vr41xx.c +++ b/drivers/rtc/rtc-vr41xx.c @@ -209,19 +209,18 @@ static int vr41xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm) static int vr41xx_rtc_irq_set_freq(struct device *dev, int freq) { - unsigned long count; + u64 count; if (!is_power_of_2(freq)) return -EINVAL; count = RTC_FREQUENCY; do_div(count, freq); - periodic_count = count; - spin_lock_irq(&rtc_lock); - rtc1_write(RTCL1LREG, count); - rtc1_write(RTCL1HREG, count >> 16); + periodic_count = count; + rtc1_write(RTCL1LREG, periodic_count); + rtc1_write(RTCL1HREG, periodic_count >> 16); spin_unlock_irq(&rtc_lock); -- GitLab From bcb3a1676b87effbdeffe8da5c44f63433d158d9 Mon Sep 17 00:00:00 2001 From: Scott Valentine Date: Wed, 11 Nov 2009 14:26:49 -0800 Subject: [PATCH 0792/1165] rtc: v3020: fix v3020_mmio_read_bit() v3020_mmio_read_bit() always returns 0 when left_shift > 7. v3020_mmio_read_bit()'s return type is (unsigned char). The code returns a value masked by (1 << left_shift) that is casted to the return type. If left_shift is larger than 7, the cast will always result in a 0 return value. The problem was discovered with left_shift = 16, and the included patch corrects the problem. The bug was introduced in the last (Apr 3 2009) commit of the file, kernel versions 2.6.30 and later. Cc: Alessandro Zummo Cc: Paul Gortmaker Cc: Raphael Assenat Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-v3020.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c index ad164056feb..423cd5a30b1 100644 --- a/drivers/rtc/rtc-v3020.c +++ b/drivers/rtc/rtc-v3020.c @@ -96,7 +96,7 @@ static void v3020_mmio_write_bit(struct v3020 *chip, unsigned char bit) static unsigned char v3020_mmio_read_bit(struct v3020 *chip) { - return readl(chip->ioaddress) & (1 << chip->leftshift); + return !!(readl(chip->ioaddress) & (1 << chip->leftshift)); } static struct v3020_chip_ops v3020_mmio_ops = { -- GitLab From d62668e1dd830a81ef73ec73386b420cb2a9ca62 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 11 Nov 2009 14:26:50 -0800 Subject: [PATCH 0793/1165] gpiolib: fix device_create() result check In case of failure, device_create() returns not NULL but the error code. The current code checks for non-NULL though which causes kernel oops in sysfs_create_group() when device_create() fails. Check for error using IS_ERR() and propagate the error value using PTR_ERR() instead of fixed -ENODEV code returned now... Signed-off-by: Sergei Shtylyov Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/gpiolib.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 662ed923d9e..50de0f5750d 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -661,7 +661,7 @@ int gpio_export(unsigned gpio, bool direction_may_change) dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0), desc, ioname ? ioname : "gpio%d", gpio); - if (dev) { + if (!IS_ERR(dev)) { if (direction_may_change) status = sysfs_create_group(&dev->kobj, &gpio_attr_group); @@ -679,7 +679,7 @@ int gpio_export(unsigned gpio, bool direction_may_change) if (status != 0) device_unregister(dev); } else - status = -ENODEV; + status = PTR_ERR(dev); if (status == 0) set_bit(FLAG_EXPORT, &desc->flags); } @@ -800,11 +800,11 @@ static int gpiochip_export(struct gpio_chip *chip) mutex_lock(&sysfs_lock); dev = device_create(&gpio_class, chip->dev, MKDEV(0, 0), chip, "gpiochip%d", chip->base); - if (dev) { + if (!IS_ERR(dev)) { status = sysfs_create_group(&dev->kobj, &gpiochip_attr_group); } else - status = -ENODEV; + status = PTR_ERR(dev); chip->exported = (status == 0); mutex_unlock(&sysfs_lock); -- GitLab From 69fd8d24673a8f4f8be5db7f84b5dc9e4ff354c8 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 11 Nov 2009 14:26:51 -0800 Subject: [PATCH 0794/1165] drivers/video/msm: update to new kernel TASK_INTERRUPTIBLE and friends are now only available after including , so include it when needed. bus_id is no longer available/necessary, so remove that. Android pmem driver is not available in mainline, so remove its hooks from drivers/video. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/msm/mddi.c | 1 + drivers/video/msm/mddi_client_nt35399.c | 1 + drivers/video/msm/mddi_client_toshiba.c | 1 + drivers/video/msm/mdp.c | 18 ------------------ drivers/video/msm/mdp_ppp.c | 20 -------------------- 5 files changed, 3 insertions(+), 38 deletions(-) diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c index 5c5a1ad1d39..474421fe79a 100644 --- a/drivers/video/msm/mddi.c +++ b/drivers/video/msm/mddi.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/video/msm/mddi_client_nt35399.c b/drivers/video/msm/mddi_client_nt35399.c index 9c78050ac79..c9e9349451c 100644 --- a/drivers/video/msm/mddi_client_nt35399.c +++ b/drivers/video/msm/mddi_client_nt35399.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/drivers/video/msm/mddi_client_toshiba.c b/drivers/video/msm/mddi_client_toshiba.c index 80d0f5fdf0b..71048e78f7f 100644 --- a/drivers/video/msm/mddi_client_toshiba.c +++ b/drivers/video/msm/mddi_client_toshiba.c @@ -20,6 +20,7 @@ #include #include #include +#include #include diff --git a/drivers/video/msm/mdp.c b/drivers/video/msm/mdp.c index 99636a2b20f..6c519e2fa2b 100644 --- a/drivers/video/msm/mdp.c +++ b/drivers/video/msm/mdp.c @@ -22,9 +22,6 @@ #include #include #include -#ifdef CONFIG_ANDROID_PMEM -#include -#endif #include #include @@ -262,11 +259,6 @@ int get_img(struct mdp_img *img, struct fb_info *info, struct file *file; unsigned long vstart; -#ifdef CONFIG_ANDROID_PMEM - if (!get_pmem_file(img->memory_id, start, &vstart, len, filep)) - return 0; -#endif - file = fget_light(img->memory_id, &put_needed); if (file == NULL) return -1; @@ -283,12 +275,6 @@ int get_img(struct mdp_img *img, struct fb_info *info, void put_img(struct file *src_file, struct file *dst_file) { -#ifdef CONFIG_ANDROID_PMEM - if (src_file) - put_pmem_file(src_file); - if (dst_file) - put_pmem_file(dst_file); -#endif } int mdp_blit(struct mdp_device *mdp_dev, struct fb_info *fb, @@ -320,9 +306,6 @@ int mdp_blit(struct mdp_device *mdp_dev, struct fb_info *fb, if (unlikely(get_img(&req->dst, fb, &dst_start, &dst_len, &dst_file))) { printk(KERN_ERR "mpd_ppp: could not retrieve dst image from " "memory\n"); -#ifdef CONFIG_ANDROID_PMEM - put_pmem_file(src_file); -#endif return -EINVAL; } mutex_lock(&mdp_mutex); @@ -499,7 +482,6 @@ int mdp_probe(struct platform_device *pdev) /* register mdp device */ mdp->mdp_dev.dev.parent = &pdev->dev; mdp->mdp_dev.dev.class = mdp_class; - snprintf(mdp->mdp_dev.dev.bus_id, BUS_ID_SIZE, "mdp%d", pdev->id); /* if you can remove the platform device you'd have to implement * this: diff --git a/drivers/video/msm/mdp_ppp.c b/drivers/video/msm/mdp_ppp.c index ba2c4673b64..4ff001f4cbb 100644 --- a/drivers/video/msm/mdp_ppp.c +++ b/drivers/video/msm/mdp_ppp.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include "mdp_hw.h" @@ -579,25 +578,6 @@ static int valid_src_dst(unsigned long src_start, unsigned long src_len, static void flush_imgs(struct mdp_blit_req *req, struct mdp_regs *regs, struct file *src_file, struct file *dst_file) { -#ifdef CONFIG_ANDROID_PMEM - uint32_t src0_len, src1_len, dst0_len, dst1_len; - - /* flush src images to memory before dma to mdp */ - get_len(&req->src, &req->src_rect, regs->src_bpp, &src0_len, - &src1_len); - flush_pmem_file(src_file, req->src.offset, src0_len); - if (IS_PSEUDOPLNR(req->src.format)) - flush_pmem_file(src_file, req->src.offset + src0_len, - src1_len); - - /* flush dst images */ - get_len(&req->dst, &req->dst_rect, regs->dst_bpp, &dst0_len, - &dst1_len); - flush_pmem_file(dst_file, req->dst.offset, dst0_len); - if (IS_PSEUDOPLNR(req->dst.format)) - flush_pmem_file(dst_file, req->dst.offset + dst0_len, - dst1_len); -#endif } static void get_chroma_addr(struct mdp_img *img, struct mdp_rect *rect, -- GitLab From cbf83cc5a29dba480cf1ba1c5e3417a0d4a31410 Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 11 Nov 2009 14:26:52 -0800 Subject: [PATCH 0795/1165] pps: locking scheme fix up for PPS_GETPARAMS Userland programs may read/write PPS parameters at same time and these operations may corrupt PPS data. Signed-off-by: Rodolfo Giometti Tested-by: Reg Clemens Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/pps.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c index fea17e7805e..ca5183bdad8 100644 --- a/drivers/pps/pps.c +++ b/drivers/pps/pps.c @@ -71,9 +71,14 @@ static long pps_cdev_ioctl(struct file *file, case PPS_GETPARAMS: pr_debug("PPS_GETPARAMS: source %d\n", pps->id); - /* Return current parameters */ - err = copy_to_user(uarg, &pps->params, - sizeof(struct pps_kparams)); + spin_lock_irq(&pps->lock); + + /* Get the current parameters */ + params = pps->params; + + spin_unlock_irq(&pps->lock); + + err = copy_to_user(uarg, ¶ms, sizeof(struct pps_kparams)); if (err) return -EFAULT; -- GitLab From 276b282e904f690dc930f9bc946110651f297669 Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 11 Nov 2009 14:26:54 -0800 Subject: [PATCH 0796/1165] pps: events reporting fix up PPS events must be recorded according to PPS's mode settings. If a process asks for (i.e.) capture-assert events only, when the PPS client calls the pps_event() function to save the current PPS event, we should verify the event type and then discard unwanted ones. Also, without this patch userland processes waiting for a specific PPS event (assert or clear but not both) may be awakened at wrong time. Signed-off-by: Rodolfo Giometti Tested-by: William S. Brasher Tested-by: Reg Clemens Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/kapi.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/pps/kapi.c b/drivers/pps/kapi.c index 35a0b192d76..2d414e23d39 100644 --- a/drivers/pps/kapi.c +++ b/drivers/pps/kapi.c @@ -271,6 +271,7 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) { struct pps_device *pps; unsigned long flags; + int captured = 0; if ((event & (PPS_CAPTUREASSERT | PPS_CAPTURECLEAR)) == 0) { printk(KERN_ERR "pps: unknown event (%x) for source %d\n", @@ -293,7 +294,8 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) /* Check the event */ pps->current_mode = pps->params.mode; - if (event & PPS_CAPTUREASSERT) { + if ((event & PPS_CAPTUREASSERT) & + (pps->params.mode & PPS_CAPTUREASSERT)) { /* We have to add an offset? */ if (pps->params.mode & PPS_OFFSETASSERT) pps_add_offset(ts, &pps->params.assert_off_tu); @@ -303,8 +305,11 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) pps->assert_sequence++; pr_debug("capture assert seq #%u for source %d\n", pps->assert_sequence, source); + + captured = ~0; } - if (event & PPS_CAPTURECLEAR) { + if ((event & PPS_CAPTURECLEAR) & + (pps->params.mode & PPS_CAPTURECLEAR)) { /* We have to add an offset? */ if (pps->params.mode & PPS_OFFSETCLEAR) pps_add_offset(ts, &pps->params.clear_off_tu); @@ -314,12 +319,17 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) pps->clear_sequence++; pr_debug("capture clear seq #%u for source %d\n", pps->clear_sequence, source); + + captured = ~0; } - pps->go = ~0; - wake_up_interruptible(&pps->queue); + /* Wake up iif captured somthing */ + if (captured) { + pps->go = ~0; + wake_up_interruptible(&pps->queue); - kill_fasync(&pps->async_queue, SIGIO, POLL_IN); + kill_fasync(&pps->async_queue, SIGIO, POLL_IN); + } spin_unlock_irqrestore(&pps->lock, flags); -- GitLab From e04b5ef8b49db87d01a9b3a47fe41a918a0c0ff5 Mon Sep 17 00:00:00 2001 From: Mike Hommey Date: Wed, 11 Nov 2009 14:26:55 -0800 Subject: [PATCH 0797/1165] __generic_block_fiemap(): fix for files bigger than 4GB Because of an integer overflow on start_blk, various kind of wrong results would be returned by the generic_block_fiemap() handler, such as no extents when there is a 4GB+ hole at the beginning of the file, or wrong fe_logical when an extent starts after the first 4GB. Signed-off-by: Mike Hommey Cc: Alexander Viro Cc: Steven Whitehouse Cc: Theodore Ts'o Cc: Eric Sandeen Cc: Josef Bacik Cc: Mark Fasheh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ioctl.c b/fs/ioctl.c index 7b17a14396f..6c751106c2e 100644 --- a/fs/ioctl.c +++ b/fs/ioctl.c @@ -254,7 +254,7 @@ int __generic_block_fiemap(struct inode *inode, u64 len, get_block_t *get_block) { struct buffer_head tmp; - unsigned int start_blk; + unsigned long long start_blk; long long length = 0, map_len = 0; u64 logical = 0, phys = 0, size = 0; u32 flags = FIEMAP_EXTENT_MERGED; -- GitLab From 833af8427be4b217b5bc522f61afdbd3f1d282c2 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 11 Nov 2009 15:35:18 +0900 Subject: [PATCH 0798/1165] percpu: restructure pcpu_extend_area_map() to fix bugs and improve readability pcpu_extend_area_map() had the following two bugs. * It should return 1 if pcpu_lock was dropped and reacquired but it returned 0. This could lead to oops if free_percpu() races with area map extension. * pcpu_mem_free() was called under pcpu_lock. pcpu_mem_free() might end up calling vfree() which isn't IRQ safe. This could lead to deadlock through lock order inversion via IRQ. In addition, Linus pointed out that the temporary lock dropping and subtle three-way return value of pcpu_extend_area_map() was very ugly and suggested to split the function into two - pcpu_need_to_extend() and pcpu_extend_area_map(). This patch restructures pcpu_extend_area_map() as suggested and fixes the two bugs. Signed-off-by: Tejun Heo Acked-by: Linus Torvalds Cc: Ingo Molnar --- mm/percpu.c | 121 +++++++++++++++++++++++++++++++++++----------------- 1 file changed, 81 insertions(+), 40 deletions(-) diff --git a/mm/percpu.c b/mm/percpu.c index d90797160c2..5adfc268b40 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -355,62 +355,86 @@ static struct pcpu_chunk *pcpu_chunk_addr_search(void *addr) } /** - * pcpu_extend_area_map - extend area map for allocation - * @chunk: target chunk + * pcpu_need_to_extend - determine whether chunk area map needs to be extended + * @chunk: chunk of interest * - * Extend area map of @chunk so that it can accomodate an allocation. - * A single allocation can split an area into three areas, so this - * function makes sure that @chunk->map has at least two extra slots. + * Determine whether area map of @chunk needs to be extended to + * accomodate a new allocation. * * CONTEXT: - * pcpu_alloc_mutex, pcpu_lock. pcpu_lock is released and reacquired - * if area map is extended. + * pcpu_lock. * * RETURNS: - * 0 if noop, 1 if successfully extended, -errno on failure. + * New target map allocation length if extension is necessary, 0 + * otherwise. */ -static int pcpu_extend_area_map(struct pcpu_chunk *chunk, unsigned long *flags) +static int pcpu_need_to_extend(struct pcpu_chunk *chunk) { int new_alloc; - int *new; - size_t size; - /* has enough? */ if (chunk->map_alloc >= chunk->map_used + 2) return 0; - spin_unlock_irqrestore(&pcpu_lock, *flags); - new_alloc = PCPU_DFL_MAP_ALLOC; while (new_alloc < chunk->map_used + 2) new_alloc *= 2; - new = pcpu_mem_alloc(new_alloc * sizeof(new[0])); - if (!new) { - spin_lock_irqsave(&pcpu_lock, *flags); + return new_alloc; +} + +/** + * pcpu_extend_area_map - extend area map of a chunk + * @chunk: chunk of interest + * @new_alloc: new target allocation length of the area map + * + * Extend area map of @chunk to have @new_alloc entries. + * + * CONTEXT: + * Does GFP_KERNEL allocation. Grabs and releases pcpu_lock. + * + * RETURNS: + * 0 on success, -errno on failure. + */ +static int pcpu_extend_area_map(struct pcpu_chunk *chunk, int new_alloc) +{ + int *old = NULL, *new = NULL; + size_t old_size = 0, new_size = new_alloc * sizeof(new[0]); + unsigned long flags; + + new = pcpu_mem_alloc(new_size); + if (!new) return -ENOMEM; - } - /* - * Acquire pcpu_lock and switch to new area map. Only free - * could have happened inbetween, so map_used couldn't have - * grown. - */ - spin_lock_irqsave(&pcpu_lock, *flags); - BUG_ON(new_alloc < chunk->map_used + 2); + /* acquire pcpu_lock and switch to new area map */ + spin_lock_irqsave(&pcpu_lock, flags); + + if (new_alloc <= chunk->map_alloc) + goto out_unlock; - size = chunk->map_alloc * sizeof(chunk->map[0]); - memcpy(new, chunk->map, size); + old_size = chunk->map_alloc * sizeof(chunk->map[0]); + memcpy(new, chunk->map, old_size); /* * map_alloc < PCPU_DFL_MAP_ALLOC indicates that the chunk is * one of the first chunks and still using static map. */ if (chunk->map_alloc >= PCPU_DFL_MAP_ALLOC) - pcpu_mem_free(chunk->map, size); + old = chunk->map; chunk->map_alloc = new_alloc; chunk->map = new; + new = NULL; + +out_unlock: + spin_unlock_irqrestore(&pcpu_lock, flags); + + /* + * pcpu_mem_free() might end up calling vfree() which uses + * IRQ-unsafe lock and thus can't be called under pcpu_lock. + */ + pcpu_mem_free(old, old_size); + pcpu_mem_free(new, new_size); + return 0; } @@ -1049,7 +1073,7 @@ static void *pcpu_alloc(size_t size, size_t align, bool reserved) static int warn_limit = 10; struct pcpu_chunk *chunk; const char *err; - int slot, off; + int slot, off, new_alloc; unsigned long flags; if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) { @@ -1064,14 +1088,25 @@ static void *pcpu_alloc(size_t size, size_t align, bool reserved) /* serve reserved allocations from the reserved chunk if available */ if (reserved && pcpu_reserved_chunk) { chunk = pcpu_reserved_chunk; - if (size > chunk->contig_hint || - pcpu_extend_area_map(chunk, &flags) < 0) { - err = "failed to extend area map of reserved chunk"; + + if (size > chunk->contig_hint) { + err = "alloc from reserved chunk failed"; goto fail_unlock; } + + while ((new_alloc = pcpu_need_to_extend(chunk))) { + spin_unlock_irqrestore(&pcpu_lock, flags); + if (pcpu_extend_area_map(chunk, new_alloc) < 0) { + err = "failed to extend area map of reserved chunk"; + goto fail_unlock_mutex; + } + spin_lock_irqsave(&pcpu_lock, flags); + } + off = pcpu_alloc_area(chunk, size, align); if (off >= 0) goto area_found; + err = "alloc from reserved chunk failed"; goto fail_unlock; } @@ -1083,14 +1118,20 @@ restart: if (size > chunk->contig_hint) continue; - switch (pcpu_extend_area_map(chunk, &flags)) { - case 0: - break; - case 1: - goto restart; /* pcpu_lock dropped, restart */ - default: - err = "failed to extend area map"; - goto fail_unlock; + new_alloc = pcpu_need_to_extend(chunk); + if (new_alloc) { + spin_unlock_irqrestore(&pcpu_lock, flags); + if (pcpu_extend_area_map(chunk, + new_alloc) < 0) { + err = "failed to extend area map"; + goto fail_unlock_mutex; + } + spin_lock_irqsave(&pcpu_lock, flags); + /* + * pcpu_lock has been dropped, need to + * restart cpu_slot list walking. + */ + goto restart; } off = pcpu_alloc_area(chunk, size, align); -- GitLab From 2d109a845dd3074885db726892c629ab73dd0ed8 Mon Sep 17 00:00:00 2001 From: "Zou, Nanhai" Date: Fri, 6 Nov 2009 02:13:01 +0000 Subject: [PATCH 0799/1165] drm/i915: Fix IRQ stall issue on Ironlake The master irq control in DE must be disabled before irq handling, and enable after the process. This fixes the irq stall issue on Ironlake. Cc: Stable Team Signed-off-by: Zou, Nanhai Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_irq.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index c3ceffa46ea..aa7fd82aa6e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -254,10 +254,15 @@ irqreturn_t igdng_irq_handler(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; int ret = IRQ_NONE; - u32 de_iir, gt_iir; + u32 de_iir, gt_iir, de_ier; u32 new_de_iir, new_gt_iir; struct drm_i915_master_private *master_priv; + /* disable master interrupt before clearing iir */ + de_ier = I915_READ(DEIER); + I915_WRITE(DEIER, de_ier & ~DE_MASTER_IRQ_CONTROL); + (void)I915_READ(DEIER); + de_iir = I915_READ(DEIIR); gt_iir = I915_READ(GTIIR); @@ -290,6 +295,9 @@ irqreturn_t igdng_irq_handler(struct drm_device *dev) gt_iir = new_gt_iir; } + I915_WRITE(DEIER, de_ier); + (void)I915_READ(DEIER); + return ret; } -- GitLab From 5586c8bc93ac5fe75f5fd14e8c7add5344d1c548 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 6 Nov 2009 02:13:02 +0000 Subject: [PATCH 0800/1165] drm/i915: Add more registers save/restore for Ironlake suspend Add more display registers save/restore to fix unstable issues during S4 testing on Ironlake. And DPLL_B_MD should not be restored on Ironlake. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/i915_drv.h | 12 ++++++++++ drivers/gpu/drm/i915/i915_suspend.c | 36 ++++++++++++++++++++++++++++- 2 files changed, 47 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 57204e29897..a725f659119 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -296,6 +296,7 @@ typedef struct drm_i915_private { u32 saveVBLANK_A; u32 saveVSYNC_A; u32 saveBCLRPAT_A; + u32 saveTRANSACONF; u32 saveTRANS_HTOTAL_A; u32 saveTRANS_HBLANK_A; u32 saveTRANS_HSYNC_A; @@ -326,6 +327,7 @@ typedef struct drm_i915_private { u32 saveVBLANK_B; u32 saveVSYNC_B; u32 saveBCLRPAT_B; + u32 saveTRANSBCONF; u32 saveTRANS_HTOTAL_B; u32 saveTRANS_HBLANK_B; u32 saveTRANS_HSYNC_B; @@ -414,6 +416,16 @@ typedef struct drm_i915_private { u32 savePFB_WIN_SZ; u32 savePFA_WIN_POS; u32 savePFB_WIN_POS; + u32 savePCH_DREF_CONTROL; + u32 saveDISP_ARB_CTL; + u32 savePIPEA_DATA_M1; + u32 savePIPEA_DATA_N1; + u32 savePIPEA_LINK_M1; + u32 savePIPEA_LINK_N1; + u32 savePIPEB_DATA_M1; + u32 savePIPEB_DATA_N1; + u32 savePIPEB_LINK_M1; + u32 savePIPEB_LINK_N1; struct { struct drm_mm gtt_space; diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 992d5617e79..6eec8171a44 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -239,6 +239,11 @@ static void i915_save_modeset_reg(struct drm_device *dev) if (drm_core_check_feature(dev, DRIVER_MODESET)) return; + if (IS_IGDNG(dev)) { + dev_priv->savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL); + dev_priv->saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL); + } + /* Pipe & plane A info */ dev_priv->savePIPEACONF = I915_READ(PIPEACONF); dev_priv->savePIPEASRC = I915_READ(PIPEASRC); @@ -263,6 +268,11 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A); if (IS_IGDNG(dev)) { + dev_priv->savePIPEA_DATA_M1 = I915_READ(PIPEA_DATA_M1); + dev_priv->savePIPEA_DATA_N1 = I915_READ(PIPEA_DATA_N1); + dev_priv->savePIPEA_LINK_M1 = I915_READ(PIPEA_LINK_M1); + dev_priv->savePIPEA_LINK_N1 = I915_READ(PIPEA_LINK_N1); + dev_priv->saveFDI_TXA_CTL = I915_READ(FDI_TXA_CTL); dev_priv->saveFDI_RXA_CTL = I915_READ(FDI_RXA_CTL); @@ -270,6 +280,7 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->savePFA_WIN_SZ = I915_READ(PFA_WIN_SZ); dev_priv->savePFA_WIN_POS = I915_READ(PFA_WIN_POS); + dev_priv->saveTRANSACONF = I915_READ(TRANSACONF); dev_priv->saveTRANS_HTOTAL_A = I915_READ(TRANS_HTOTAL_A); dev_priv->saveTRANS_HBLANK_A = I915_READ(TRANS_HBLANK_A); dev_priv->saveTRANS_HSYNC_A = I915_READ(TRANS_HSYNC_A); @@ -314,6 +325,11 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->saveBCLRPAT_B = I915_READ(BCLRPAT_B); if (IS_IGDNG(dev)) { + dev_priv->savePIPEB_DATA_M1 = I915_READ(PIPEB_DATA_M1); + dev_priv->savePIPEB_DATA_N1 = I915_READ(PIPEB_DATA_N1); + dev_priv->savePIPEB_LINK_M1 = I915_READ(PIPEB_LINK_M1); + dev_priv->savePIPEB_LINK_N1 = I915_READ(PIPEB_LINK_N1); + dev_priv->saveFDI_TXB_CTL = I915_READ(FDI_TXB_CTL); dev_priv->saveFDI_RXB_CTL = I915_READ(FDI_RXB_CTL); @@ -321,6 +337,7 @@ static void i915_save_modeset_reg(struct drm_device *dev) dev_priv->savePFB_WIN_SZ = I915_READ(PFB_WIN_SZ); dev_priv->savePFB_WIN_POS = I915_READ(PFB_WIN_POS); + dev_priv->saveTRANSBCONF = I915_READ(TRANSBCONF); dev_priv->saveTRANS_HTOTAL_B = I915_READ(TRANS_HTOTAL_B); dev_priv->saveTRANS_HBLANK_B = I915_READ(TRANS_HBLANK_B); dev_priv->saveTRANS_HSYNC_B = I915_READ(TRANS_HSYNC_B); @@ -368,6 +385,11 @@ static void i915_restore_modeset_reg(struct drm_device *dev) fpb1_reg = FPB1; } + if (IS_IGDNG(dev)) { + I915_WRITE(PCH_DREF_CONTROL, dev_priv->savePCH_DREF_CONTROL); + I915_WRITE(DISP_ARB_CTL, dev_priv->saveDISP_ARB_CTL); + } + /* Pipe & plane A info */ /* Prime the clock */ if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) { @@ -395,6 +417,11 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A); if (IS_IGDNG(dev)) { + I915_WRITE(PIPEA_DATA_M1, dev_priv->savePIPEA_DATA_M1); + I915_WRITE(PIPEA_DATA_N1, dev_priv->savePIPEA_DATA_N1); + I915_WRITE(PIPEA_LINK_M1, dev_priv->savePIPEA_LINK_M1); + I915_WRITE(PIPEA_LINK_N1, dev_priv->savePIPEA_LINK_N1); + I915_WRITE(FDI_RXA_CTL, dev_priv->saveFDI_RXA_CTL); I915_WRITE(FDI_TXA_CTL, dev_priv->saveFDI_TXA_CTL); @@ -402,6 +429,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(PFA_WIN_SZ, dev_priv->savePFA_WIN_SZ); I915_WRITE(PFA_WIN_POS, dev_priv->savePFA_WIN_POS); + I915_WRITE(TRANSACONF, dev_priv->saveTRANSACONF); I915_WRITE(TRANS_HTOTAL_A, dev_priv->saveTRANS_HTOTAL_A); I915_WRITE(TRANS_HBLANK_A, dev_priv->saveTRANS_HBLANK_A); I915_WRITE(TRANS_HSYNC_A, dev_priv->saveTRANS_HSYNC_A); @@ -439,7 +467,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) /* Actually enable it */ I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B); DRM_UDELAY(150); - if (IS_I965G(dev)) + if (IS_I965G(dev) && !IS_IGDNG(dev)) I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD); DRM_UDELAY(150); @@ -454,6 +482,11 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B); if (IS_IGDNG(dev)) { + I915_WRITE(PIPEB_DATA_M1, dev_priv->savePIPEB_DATA_M1); + I915_WRITE(PIPEB_DATA_N1, dev_priv->savePIPEB_DATA_N1); + I915_WRITE(PIPEB_LINK_M1, dev_priv->savePIPEB_LINK_M1); + I915_WRITE(PIPEB_LINK_N1, dev_priv->savePIPEB_LINK_N1); + I915_WRITE(FDI_RXB_CTL, dev_priv->saveFDI_RXB_CTL); I915_WRITE(FDI_TXB_CTL, dev_priv->saveFDI_TXB_CTL); @@ -461,6 +494,7 @@ static void i915_restore_modeset_reg(struct drm_device *dev) I915_WRITE(PFB_WIN_SZ, dev_priv->savePFB_WIN_SZ); I915_WRITE(PFB_WIN_POS, dev_priv->savePFB_WIN_POS); + I915_WRITE(TRANSBCONF, dev_priv->saveTRANSBCONF); I915_WRITE(TRANS_HTOTAL_B, dev_priv->saveTRANS_HTOTAL_B); I915_WRITE(TRANS_HBLANK_B, dev_priv->saveTRANS_HBLANK_B); I915_WRITE(TRANS_HSYNC_B, dev_priv->saveTRANS_HSYNC_B); -- GitLab From 9cf1e35cb025eaa52dde37df38e2750b6adb1620 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Tue, 10 Nov 2009 03:10:22 +0000 Subject: [PATCH 0801/1165] agp/intel: new host bridge support Add new CPU host bridge id, needed for support Ironlake graphics device with it. No change for graphics device itself, so no need to update drm/i915. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/char/agp/intel-agp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 4068467ce7b..1d32d5ca5fb 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -62,6 +62,7 @@ #define PCI_DEVICE_ID_INTEL_IGDNG_D_IG 0x0042 #define PCI_DEVICE_ID_INTEL_IGDNG_M_HB 0x0044 #define PCI_DEVICE_ID_INTEL_IGDNG_MA_HB 0x0062 +#define PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB 0x006a #define PCI_DEVICE_ID_INTEL_IGDNG_M_IG 0x0046 /* cover 915 and 945 variants */ @@ -96,7 +97,8 @@ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_B43_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB) extern int agp_memory_reserved; @@ -1364,6 +1366,7 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) case PCI_DEVICE_ID_INTEL_IGDNG_D_HB: case PCI_DEVICE_ID_INTEL_IGDNG_M_HB: case PCI_DEVICE_ID_INTEL_IGDNG_MA_HB: + case PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB: *gtt_offset = *gtt_size = MB(2); break; default: @@ -2365,6 +2368,8 @@ static const struct intel_driver_description { "IGDNG/M", NULL, &intel_i965_driver }, { PCI_DEVICE_ID_INTEL_IGDNG_MA_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0, "IGDNG/MA", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0, + "IGDNG/MC2", NULL, &intel_i965_driver }, { 0, 0, 0, NULL, NULL, NULL } }; @@ -2561,6 +2566,7 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB), ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB), ID(PCI_DEVICE_ID_INTEL_IGDNG_MA_HB), + ID(PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB), { } }; -- GitLab From 156171c71a0dc4bce12b4408bb1591f8fe32dc1a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 12 Nov 2009 16:46:07 -0800 Subject: [PATCH 0802/1165] Linux 2.6.32-rc7 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index b4c04f734e5..82783612815 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 32 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- GitLab From c1ea985c710f41e97f1c72c29bbf367375370f0b Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Thu, 12 Nov 2009 00:13:32 +0900 Subject: [PATCH 0803/1165] nilfs2: fix lock order reversal in chcp operation Will fix the following lock order reversal lockdep detected: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-rc6 #7 ------------------------------------------------------- chcp/30157 is trying to acquire lock: (&nilfs->ns_mount_mutex){+.+.+.}, at: [] nilfs_cpfile_change_cpmode+0x46/0x752 [nilfs2] but task is already holding lock: (&nilfs->ns_segctor_sem){++++.+}, at: [] nilfs_transaction_begin+0xba/0x110 [nilfs2] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&nilfs->ns_segctor_sem){++++.+}: [] __lock_acquire+0x109c/0x139d [] lock_acquire+0x89/0xa0 [] down_read+0x31/0x45 [] nilfs_attach_checkpoint+0x8f/0x16b [nilfs2] [] nilfs_get_sb+0x3e7/0x653 [nilfs2] [] vfs_kern_mount+0x8b/0x124 [] do_kern_mount+0x37/0xc3 [] do_mount+0x64d/0x69d [] sys_mount+0x66/0x95 [] sysenter_do_call+0x12/0x32 -> #1 (&type->s_umount_key#31/1){+.+.+.}: [] __lock_acquire+0x109c/0x139d [] lock_acquire+0x89/0xa0 [] down_write_nested+0x34/0x52 [] sget+0x22e/0x389 [] nilfs_get_sb+0x187/0x653 [nilfs2] [] vfs_kern_mount+0x8b/0x124 [] do_kern_mount+0x37/0xc3 [] do_mount+0x64d/0x69d [] sys_mount+0x66/0x95 [] sysenter_do_call+0x12/0x32 -> #0 (&nilfs->ns_mount_mutex){+.+.+.}: [] __lock_acquire+0xe27/0x139d [] lock_acquire+0x89/0xa0 [] mutex_lock_nested+0x41/0x23e [] nilfs_cpfile_change_cpmode+0x46/0x752 [nilfs2] [] nilfs_ioctl+0x11a/0x7da [nilfs2] [] vfs_ioctl+0x27/0x6e [] do_vfs_ioctl+0x491/0x4db [] sys_ioctl+0x45/0x5f [] sysenter_do_call+0x12/0x32 Signed-off-by: Ryusuke Konishi --- fs/nilfs2/cpfile.c | 2 -- fs/nilfs2/ioctl.c | 6 +++++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/nilfs2/cpfile.c b/fs/nilfs2/cpfile.c index 1c6cfb59128..3f5d5d06f53 100644 --- a/fs/nilfs2/cpfile.c +++ b/fs/nilfs2/cpfile.c @@ -871,7 +871,6 @@ int nilfs_cpfile_change_cpmode(struct inode *cpfile, __u64 cno, int mode) * exclusive with a new mount job. Though it doesn't cover * umount, it's enough for the purpose. */ - mutex_lock(&nilfs->ns_mount_mutex); if (nilfs_checkpoint_is_mounted(nilfs, cno, 1)) { /* Current implementation does not have to protect plain read-only mounts since they are exclusive @@ -880,7 +879,6 @@ int nilfs_cpfile_change_cpmode(struct inode *cpfile, __u64 cno, int mode) ret = -EBUSY; } else ret = nilfs_cpfile_clear_snapshot(cpfile, cno); - mutex_unlock(&nilfs->ns_mount_mutex); return ret; case NILFS_SNAPSHOT: return nilfs_cpfile_set_snapshot(cpfile, cno); diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index d24057d58f1..f6af76042d8 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -99,7 +99,8 @@ static int nilfs_ioctl_wrap_copy(struct the_nilfs *nilfs, static int nilfs_ioctl_change_cpmode(struct inode *inode, struct file *filp, unsigned int cmd, void __user *argp) { - struct inode *cpfile = NILFS_SB(inode->i_sb)->s_nilfs->ns_cpfile; + struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs; + struct inode *cpfile = nilfs->ns_cpfile; struct nilfs_transaction_info ti; struct nilfs_cpmode cpmode; int ret; @@ -109,14 +110,17 @@ static int nilfs_ioctl_change_cpmode(struct inode *inode, struct file *filp, if (copy_from_user(&cpmode, argp, sizeof(cpmode))) return -EFAULT; + mutex_lock(&nilfs->ns_mount_mutex); nilfs_transaction_begin(inode->i_sb, &ti, 0); ret = nilfs_cpfile_change_cpmode( cpfile, cpmode.cm_cno, cpmode.cm_mode); if (unlikely(ret < 0)) { nilfs_transaction_abort(inode->i_sb); + mutex_unlock(&nilfs->ns_mount_mutex); return ret; } nilfs_transaction_commit(inode->i_sb); /* never fails */ + mutex_unlock(&nilfs->ns_mount_mutex); return ret; } -- GitLab From 68fb2e499b054bf8359965422fffac70eff56004 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 9 Nov 2009 02:42:47 +0000 Subject: [PATCH 0804/1165] uio: pm_runtime_disable is needed if failed Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/uio/uio_pdrv_genirq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c index 02347c57357..aa53db9f2e8 100644 --- a/drivers/uio/uio_pdrv_genirq.c +++ b/drivers/uio/uio_pdrv_genirq.c @@ -178,6 +178,7 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev) return 0; bad1: kfree(priv); + pm_runtime_disable(&pdev->dev); bad0: return ret; } -- GitLab From 0261cd9f1cb42fa44ece314d27868d83742bdf03 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 13 Nov 2009 17:40:48 +1100 Subject: [PATCH 0805/1165] md: allow v0.91 metadata to record devices as being active but not in-sync. This is a combination that didn't really make sense before. However when a reshape is converting e.g. raid5 -> raid6, the extra device is not fully in-sync, but is certainly active and contains important data. So allow that start to be meaningful and in particular get the 'recovery_offset' value (which is needed for any non-in-sync active device) from the reshape_position. Signed-off-by: NeilBrown --- drivers/md/md.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 01b9a0fd16e..b182f86a19d 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -944,6 +944,14 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev) desc->raid_disk < mddev->raid_disks */) { set_bit(In_sync, &rdev->flags); rdev->raid_disk = desc->raid_disk; + } else if (desc->state & (1<minor_version >= 91) { + rdev->recovery_offset = 0; + rdev->raid_disk = desc->raid_disk; + } } if (desc->state & (1<flags); @@ -1032,8 +1040,19 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev) list_for_each_entry(rdev2, &mddev->disks, same_set) { mdp_disk_t *d; int desc_nr; - if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags) - && !test_bit(Faulty, &rdev2->flags)) + int is_active = test_bit(In_sync, &rdev2->flags); + + if (rdev2->raid_disk >= 0 && + sb->minor_version >= 91) + /* we have nowhere to store the recovery_offset, + * but if it is not below the reshape_position, + * we can piggy-back on that. + */ + is_active = 1; + if (rdev2->raid_disk < 0 || + test_bit(Faulty, &rdev2->flags)) + is_active = 0; + if (is_active) desc_nr = rdev2->raid_disk; else desc_nr = next_spare++; @@ -1043,16 +1062,16 @@ static void super_90_sync(mddev_t *mddev, mdk_rdev_t *rdev) d->number = rdev2->desc_nr; d->major = MAJOR(rdev2->bdev->bd_dev); d->minor = MINOR(rdev2->bdev->bd_dev); - if (rdev2->raid_disk >= 0 && test_bit(In_sync, &rdev2->flags) - && !test_bit(Faulty, &rdev2->flags)) + if (is_active) d->raid_disk = rdev2->raid_disk; else d->raid_disk = rdev2->desc_nr; /* compatibility */ if (test_bit(Faulty, &rdev2->flags)) d->state = (1<flags)) { + else if (is_active) { d->state = (1<state |= (1<flags)) + d->state |= (1< Date: Fri, 13 Nov 2009 17:40:51 +1100 Subject: [PATCH 0806/1165] Don't unconditionally set in_sync on newly added device in raid5_reshape When a reshape finds that it can add spare devices into the array, those devices might already be 'in_sync' if they are beyond the old size of the array, or they might not if they are within the array. The first case happens when we change an N-drive RAID5 to an N+1-drive RAID5. The second happens when we convert an N-drive RAID5 to an N+1-drive RAID6. So set the flag more carefully. Also, ->recovery_offset is only meaningful when the flag is clear, so only set it in that case. This change needs the preceding two to ensure that the non-in_sync device doesn't get evicted from the array when it is stopped, in the case where v0.90 metadata is used. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index dcce204b6c7..ab40529bdab 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -5361,9 +5361,11 @@ static int raid5_start_reshape(mddev_t *mddev) !test_bit(Faulty, &rdev->flags)) { if (raid5_add_disk(mddev, rdev) == 0) { char nm[20]; - set_bit(In_sync, &rdev->flags); + if (rdev->raid_disk >= conf->previous_raid_disks) + set_bit(In_sync, &rdev->flags); + else + rdev->recovery_offset = 0; added_devices++; - rdev->recovery_offset = 0; sprintf(nm, "rd%d", rdev->raid_disk); if (sysfs_create_link(&mddev->kobj, &rdev->kobj, nm)) -- GitLab From c148ffdcda00b6599b70f8b65e6a1fadd1dbb127 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 13 Nov 2009 17:47:00 +1100 Subject: [PATCH 0807/1165] md/raid5: Allow dirty-degraded arrays to be assembled when only party is degraded. Normally is it not safe to allow a raid5 that is both dirty and degraded to be assembled without explicit request from that admin, as it can cause hidden data corruption. This is because 'dirty' means that the parity cannot be trusted, and 'degraded' means that the parity needs to be used. However, if the device that is missing contains only parity, then there is no issue and assembly can continue. This particularly applies when a RAID5 is being converted to a RAID6 and there is an unclean shutdown while the conversion is happening. So check for whether the degraded space only contains parity, and in that case, allow the assembly. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 79 +++++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 75 insertions(+), 4 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index ab40529bdab..d29215d966d 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4823,11 +4823,40 @@ static raid5_conf_t *setup_conf(mddev_t *mddev) return ERR_PTR(-ENOMEM); } + +static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded) +{ + switch (algo) { + case ALGORITHM_PARITY_0: + if (raid_disk < max_degraded) + return 1; + break; + case ALGORITHM_PARITY_N: + if (raid_disk >= raid_disks - max_degraded) + return 1; + break; + case ALGORITHM_PARITY_0_6: + if (raid_disk == 0 || + raid_disk == raid_disks - 1) + return 1; + break; + case ALGORITHM_LEFT_ASYMMETRIC_6: + case ALGORITHM_RIGHT_ASYMMETRIC_6: + case ALGORITHM_LEFT_SYMMETRIC_6: + case ALGORITHM_RIGHT_SYMMETRIC_6: + if (raid_disk == raid_disks - 1) + return 1; + } + return 0; +} + static int run(mddev_t *mddev) { raid5_conf_t *conf; int working_disks = 0, chunk_size; + int dirty_parity_disks = 0; mdk_rdev_t *rdev; + sector_t reshape_offset = 0; if (mddev->recovery_cp != MaxSector) printk(KERN_NOTICE "raid5: %s is not clean" @@ -4861,6 +4890,7 @@ static int run(mddev_t *mddev) "on a stripe boundary\n"); return -EINVAL; } + reshape_offset = here_new * mddev->new_chunk_sectors; /* here_new is the stripe we will write to */ here_old = mddev->reshape_position; sector_div(here_old, mddev->chunk_sectors * @@ -4916,10 +4946,51 @@ static int run(mddev_t *mddev) /* * 0 for a fully functional array, 1 or 2 for a degraded array. */ - list_for_each_entry(rdev, &mddev->disks, same_set) - if (rdev->raid_disk >= 0 && - test_bit(In_sync, &rdev->flags)) + list_for_each_entry(rdev, &mddev->disks, same_set) { + if (rdev->raid_disk < 0) + continue; + if (test_bit(In_sync, &rdev->flags)) working_disks++; + /* This disc is not fully in-sync. However if it + * just stored parity (beyond the recovery_offset), + * when we don't need to be concerned about the + * array being dirty. + * When reshape goes 'backwards', we never have + * partially completed devices, so we only need + * to worry about reshape going forwards. + */ + /* Hack because v0.91 doesn't store recovery_offset properly. */ + if (mddev->major_version == 0 && + mddev->minor_version > 90) + rdev->recovery_offset = reshape_offset; + + printk("%d: w=%d pa=%d pr=%d m=%d a=%d r=%d op1=%d op2=%d\n", + rdev->raid_disk, working_disks, conf->prev_algo, + conf->previous_raid_disks, conf->max_degraded, + conf->algorithm, conf->raid_disks, + only_parity(rdev->raid_disk, + conf->prev_algo, + conf->previous_raid_disks, + conf->max_degraded), + only_parity(rdev->raid_disk, + conf->algorithm, + conf->raid_disks, + conf->max_degraded)); + if (rdev->recovery_offset < reshape_offset) { + /* We need to check old and new layout */ + if (!only_parity(rdev->raid_disk, + conf->algorithm, + conf->raid_disks, + conf->max_degraded)) + continue; + } + if (!only_parity(rdev->raid_disk, + conf->prev_algo, + conf->previous_raid_disks, + conf->max_degraded)) + continue; + dirty_parity_disks++; + } mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks) - working_disks); @@ -4935,7 +5006,7 @@ static int run(mddev_t *mddev) mddev->dev_sectors &= ~(mddev->chunk_sectors - 1); mddev->resync_max_sectors = mddev->dev_sectors; - if (mddev->degraded > 0 && + if (mddev->degraded > dirty_parity_disks && mddev->recovery_cp != MaxSector) { if (mddev->ok_start_degraded) printk(KERN_WARNING -- GitLab From 3cc96351799d3d82c3809aa6970ef537bc1af553 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 12 Nov 2009 23:19:05 -0800 Subject: [PATCH 0808/1165] Input: force LED reset on resume We should be sending EV_LED event down to drivers upon resume even in cases when in-kernel state of the LED is off since device could come up with some leds turned on. Reported-and-tested-by: Mikko Vinni Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 29 ++++++++++++++++++----------- 1 file changed, 18 insertions(+), 11 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index cc763c96fad..2266ecbfbc0 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1292,17 +1292,24 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env) return 0; } -#define INPUT_DO_TOGGLE(dev, type, bits, on) \ - do { \ - int i; \ - if (!test_bit(EV_##type, dev->evbit)) \ - break; \ - for (i = 0; i < type##_MAX; i++) { \ - if (!test_bit(i, dev->bits##bit) || \ - !test_bit(i, dev->bits)) \ - continue; \ - dev->event(dev, EV_##type, i, on); \ - } \ +#define INPUT_DO_TOGGLE(dev, type, bits, on) \ + do { \ + int i; \ + bool active; \ + \ + if (!test_bit(EV_##type, dev->evbit)) \ + break; \ + \ + for (i = 0; i < type##_MAX; i++) { \ + if (!test_bit(i, dev->bits##bit)) \ + continue; \ + \ + active = test_bit(i, dev->bits); \ + if (!active && !on) \ + continue; \ + \ + dev->event(dev, EV_##type, i, on ? active : 0); \ + } \ } while (0) #ifdef CONFIG_PM -- GitLab From d4119bdacfcd88a763e250fe0efa6a2e11d30e88 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 12 Nov 2009 23:19:05 -0800 Subject: [PATCH 0809/1165] Input: atkbd - restore LED state at reconnect Even though input core tells us to restore LED state and repeat rate at resume keyboard may be reconnected either by request from userspace (via sysfs) or just by pulling it from the box and plugging it back in. In these cases we still need to restore state ourselves. Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 4452eabbee6..28e6110d1ff 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -1174,6 +1174,18 @@ static int atkbd_reconnect(struct serio *serio) return -1; atkbd_activate(atkbd); + + /* + * Restore LED state and repeat rate. While input core + * will do this for us at resume time reconnect may happen + * because user requested it via sysfs or simply because + * keyboard was unplugged and plugged in again so we need + * to do it ourselves here. + */ + atkbd_set_leds(atkbd); + if (!atkbd->softrepeat) + atkbd_set_repeat_rate(atkbd); + } atkbd_enable(atkbd); @@ -1422,6 +1434,7 @@ static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) atkbd->dev = new_dev; atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra); + atkbd_reset_state(atkbd); atkbd_activate(atkbd); atkbd_set_keycode_table(atkbd); atkbd_set_device_attrs(atkbd); -- GitLab From e2e527ae7fb07caa58f8fa8fa7e90ada0b175dd7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 13 Nov 2009 08:28:03 +0100 Subject: [PATCH 0810/1165] ALSA: hda - Add another Nvidia HDMI codec id (10de:0005) Found on Nvidia 9800M GTS. Reported-by: Chris Balcum Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_nvhdmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_nvhdmi.c b/sound/pci/hda/patch_nvhdmi.c index 9fb60276f5c..6afdab09bab 100644 --- a/sound/pci/hda/patch_nvhdmi.c +++ b/sound/pci/hda/patch_nvhdmi.c @@ -397,6 +397,7 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec) static struct hda_codec_preset snd_hda_preset_nvhdmi[] = { { .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0003, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, + { .id = 0x10de0005, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch }, @@ -406,6 +407,7 @@ static struct hda_codec_preset snd_hda_preset_nvhdmi[] = { MODULE_ALIAS("snd-hda-codec-id:10de0002"); MODULE_ALIAS("snd-hda-codec-id:10de0003"); +MODULE_ALIAS("snd-hda-codec-id:10de0005"); MODULE_ALIAS("snd-hda-codec-id:10de0006"); MODULE_ALIAS("snd-hda-codec-id:10de0007"); MODULE_ALIAS("snd-hda-codec-id:10de0067"); -- GitLab From 3d4c3aa938fcbfee1c7a6d66ee23288448fb97e7 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 12 Nov 2009 23:30:52 -0800 Subject: [PATCH 0811/1165] Input: psmouse - remove unneeded '\n' from psmouse.proto parameter The get parameter function should return a string without a life-feed. Otherwise you'll see additional empty line in sysfs parameters file. Signed-off-by: Takashi Iwai Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 690aed90543..5bd64841bf1 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -1673,7 +1673,7 @@ static int psmouse_get_maxproto(char *buffer, struct kernel_param *kp) { int type = *((unsigned int *)kp->arg); - return sprintf(buffer, "%s\n", psmouse_protocol_by_type(type)->name); + return sprintf(buffer, "%s", psmouse_protocol_by_type(type)->name); } static int __init psmouse_init(void) -- GitLab From 69ac74822277fa999a3f469d8362e93262deb3f4 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Fri, 13 Nov 2009 08:47:53 +0100 Subject: [PATCH 0812/1165] cciss: make device attrs static No need to export those device attributes. In fact, without this patch, we can trip over a build error if cciss is a built-in and another driver also declares and exports attributes with the same name. You'll see errors like: drivers/scsi/built-in.o: multiple definition of `dev_attr_lunid' drivers/block/built-in.o: first defined here Cc: Stephen M. Cameron Signed-off-by: Alex Chiang Cc: Cc: Jens Axboe Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 6399e5090df..92b126394fa 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -482,7 +482,7 @@ static ssize_t host_store_rescan(struct device *dev, return count; } -DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); +static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); static ssize_t dev_show_unique_id(struct device *dev, struct device_attribute *attr, @@ -512,7 +512,7 @@ static ssize_t dev_show_unique_id(struct device *dev, sn[8], sn[9], sn[10], sn[11], sn[12], sn[13], sn[14], sn[15]); } -DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL); +static DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL); static ssize_t dev_show_vendor(struct device *dev, struct device_attribute *attr, @@ -536,7 +536,7 @@ static ssize_t dev_show_vendor(struct device *dev, else return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor); } -DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL); +static DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL); static ssize_t dev_show_model(struct device *dev, struct device_attribute *attr, @@ -560,7 +560,7 @@ static ssize_t dev_show_model(struct device *dev, else return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model); } -DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL); +static DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL); static ssize_t dev_show_rev(struct device *dev, struct device_attribute *attr, @@ -584,7 +584,7 @@ static ssize_t dev_show_rev(struct device *dev, else return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev); } -DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL); +static DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL); static ssize_t cciss_show_lunid(struct device *dev, struct device_attribute *attr, char *buf) @@ -609,7 +609,7 @@ static ssize_t cciss_show_lunid(struct device *dev, lunid[0], lunid[1], lunid[2], lunid[3], lunid[4], lunid[5], lunid[6], lunid[7]); } -DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL); +static DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL); static ssize_t cciss_show_raid_level(struct device *dev, struct device_attribute *attr, char *buf) @@ -632,7 +632,7 @@ static ssize_t cciss_show_raid_level(struct device *dev, return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n", raid_label[raid]); } -DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL); +static DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL); static ssize_t cciss_show_usage_count(struct device *dev, struct device_attribute *attr, char *buf) @@ -651,7 +651,7 @@ static ssize_t cciss_show_usage_count(struct device *dev, spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); return snprintf(buf, 20, "%d\n", count); } -DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL); +static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL); static struct attribute *cciss_host_attrs[] = { &dev_attr_rescan.attr, -- GitLab From b2b36316626f0d6b92c3675a2aa2726efc71d146 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Thu, 5 Nov 2009 08:10:10 +0100 Subject: [PATCH 0813/1165] [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y Commit d2c37068429b29d6549cf3486fc84b836689e122 ([ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling) broke ISA interrupt support on pxa27x/3xx. In such a case, PXA_IRQ(0) != 0, and the IRQ number computed from ICHP must be offset by PXA_IRQ(0). Tested on an Arcom Zeus (pxa270), with both CONFIG_PXA_HAVE_ISA_IRQS enabled and disabled. Signed-off-by: Marc Zyngier Tested-by: Haojian Zhuang Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/entry-macro.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S index 241880608ac..a73bc86a3c2 100644 --- a/arch/arm/mach-pxa/include/mach/entry-macro.S +++ b/arch/arm/mach-pxa/include/mach/entry-macro.S @@ -46,5 +46,6 @@ beq 1001f bic \irqstat, \irqstat, #0x80000000 mov \irqnr, \irqstat, lsr #16 + add \irqnr, \irqnr, #(PXA_IRQ(0)) 1001: .endm -- GitLab From 2b5e080ae946b4a346b842a73d80f319b7a6453c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 21 Oct 2009 13:25:50 +0200 Subject: [PATCH 0814/1165] [ARM] pxa: fix missing underscores in mfp-pxa910.h Underscores were missing. Signed-off-by: Roel Kluin Signed-off-by: Eric Miao --- arch/arm/mach-mmp/include/mach/mfp-pxa910.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h index bf1189ff9a3..7e8a80f25dd 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h @@ -160,7 +160,7 @@ #define MMC1_WP_MMC1_WP MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM) /* PWM */ -#define GPIO27 PWM3 AF2 MFP_CFG(GPIO27, AF2) +#define GPIO27_PWM3_AF2 MFP_CFG(GPIO27, AF2) #define GPIO51_PWM2_OUT MFP_CFG(GPIO51, AF2) #define GPIO117_PWM1_OUT MFP_CFG(GPIO117, AF2) #define GPIO118_PWM2_OUT MFP_CFG(GPIO118, AF2) -- GitLab From 15f593cfcb1178f832aaf9ec0200acd8c3c3348c Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sun, 8 Nov 2009 03:05:11 +0100 Subject: [PATCH 0815/1165] [ARM] pxa/colibri: fix AC97 ifdefs and add missing include The AC97 part wasn't initialized on Colibri/PXA320 because the macros were wrong. Also, the code didn't compile because of a header file not being included. Signed-off-by: Marek Vasut Signed-off-by: Eric Miao --- arch/arm/mach-pxa/colibri-pxa320.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 494572825c7..ec0e14b9668 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "generic.h" #include "devices.h" @@ -145,7 +146,8 @@ static void __init colibri_pxa320_init_lcd(void) static inline void colibri_pxa320_init_lcd(void) {} #endif -#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE) +#if defined(CONFIG_SND_AC97_CODEC) || \ + defined(CONFIG_SND_AC97_CODEC_MODULE) static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = { GPIO34_AC97_SYSCLK, GPIO35_AC97_SDATA_IN_0, -- GitLab From 1c622ae67bfc729891f5cd80795b15b87e6ac471 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 13 Nov 2009 09:31:35 +0100 Subject: [PATCH 0816/1165] netfilter: xt_osf: fix xt_osf_remove_callback() return value Return a negative error value. Signed-off-by: Roel Kluin Signed-off-by: Patrick McHardy --- net/netfilter/xt_osf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c index 63e19050465..4d1a41bbd5d 100644 --- a/net/netfilter/xt_osf.c +++ b/net/netfilter/xt_osf.c @@ -118,7 +118,7 @@ static int xt_osf_remove_callback(struct sock *ctnl, struct sk_buff *skb, { struct xt_osf_user_finger *f; struct xt_osf_finger *sf; - int err = ENOENT; + int err = -ENOENT; if (!osf_attrs[OSF_ATTR_FINGER]) return -EINVAL; -- GitLab From 7378396cd172cc058fa62220c6486419046c4e0c Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 13 Nov 2009 09:34:44 +0100 Subject: [PATCH 0817/1165] netfilter: nf_log: fix sleeping function called from invalid context in seq_show() [ 171.925285] BUG: sleeping function called from invalid context at kernel/mutex.c:280 [ 171.925296] in_atomic(): 1, irqs_disabled(): 0, pid: 671, name: grep [ 171.925306] 2 locks held by grep/671: [ 171.925312] #0: (&p->lock){+.+.+.}, at: [] seq_read+0x25/0x36c [ 171.925340] #1: (rcu_read_lock){.+.+..}, at: [] seq_start+0x0/0x44 [ 171.925372] Pid: 671, comm: grep Not tainted 2.6.31.6-4-netbook #3 [ 171.925380] Call Trace: [ 171.925398] [] ? __debug_show_held_locks+0x1e/0x20 [ 171.925414] [] __might_sleep+0xfb/0x102 [ 171.925430] [] mutex_lock_nested+0x1c/0x2ad [ 171.925444] [] seq_show+0x74/0x127 [ 171.925456] [] seq_read+0x1b4/0x36c [ 171.925469] [] ? seq_read+0x0/0x36c [ 171.925483] [] proc_reg_read+0x60/0x74 [ 171.925496] [] ? proc_reg_read+0x0/0x74 [ 171.925510] [] vfs_read+0x87/0x110 [ 171.925523] [] sys_read+0x3b/0x60 [ 171.925538] [] syscall_call+0x7/0xb Fix it by replacing RCU with nf_log_mutex. Reported-by: "Yin, Kangkai" Signed-off-by: Wu Fengguang Signed-off-by: Patrick McHardy --- net/netfilter/nf_log.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index c93494fef8e..d65d3481919 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -128,9 +128,8 @@ EXPORT_SYMBOL(nf_log_packet); #ifdef CONFIG_PROC_FS static void *seq_start(struct seq_file *seq, loff_t *pos) - __acquires(RCU) { - rcu_read_lock(); + mutex_lock(&nf_log_mutex); if (*pos >= ARRAY_SIZE(nf_loggers)) return NULL; @@ -149,9 +148,8 @@ static void *seq_next(struct seq_file *s, void *v, loff_t *pos) } static void seq_stop(struct seq_file *s, void *v) - __releases(RCU) { - rcu_read_unlock(); + mutex_unlock(&nf_log_mutex); } static int seq_show(struct seq_file *s, void *v) @@ -161,7 +159,7 @@ static int seq_show(struct seq_file *s, void *v) struct nf_logger *t; int ret; - logger = rcu_dereference(nf_loggers[*pos]); + logger = nf_loggers[*pos]; if (!logger) ret = seq_printf(s, "%2lld NONE (", *pos); @@ -171,22 +169,16 @@ static int seq_show(struct seq_file *s, void *v) if (ret < 0) return ret; - mutex_lock(&nf_log_mutex); list_for_each_entry(t, &nf_loggers_l[*pos], list[*pos]) { ret = seq_printf(s, "%s", t->name); - if (ret < 0) { - mutex_unlock(&nf_log_mutex); + if (ret < 0) return ret; - } if (&t->list[*pos] != nf_loggers_l[*pos].prev) { ret = seq_printf(s, ","); - if (ret < 0) { - mutex_unlock(&nf_log_mutex); + if (ret < 0) return ret; - } } } - mutex_unlock(&nf_log_mutex); return seq_printf(s, ")\n"); } -- GitLab From 9da4ea69f28cf2bd20be86eda34afbc03c2180c7 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Fri, 13 Nov 2009 16:44:14 +0800 Subject: [PATCH 0818/1165] [ARM] pxa: fix incorrect mfp_to_gpio() conversion Since MFP_PIN_GPIO* now includes 128-255, mfp_to_gpio() is no longer valid for those additional pins, fix it. Signed-off-by: Eric Miao --- arch/arm/plat-pxa/include/plat/mfp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h index 22086e696e8..857a6839071 100644 --- a/arch/arm/plat-pxa/include/plat/mfp.h +++ b/arch/arm/plat-pxa/include/plat/mfp.h @@ -16,7 +16,7 @@ #ifndef __ASM_PLAT_MFP_H #define __ASM_PLAT_MFP_H -#define mfp_to_gpio(m) ((m) % 128) +#define mfp_to_gpio(m) ((m) % 256) /* list of all the configurable MFP pins */ enum { -- GitLab From ccaf6553963bc6304d5820962a08a4397d0a2dc2 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 13 Nov 2009 15:43:51 +0100 Subject: [PATCH 0819/1165] [S390] monreader: fix use after free bug with suspend/resume The monreader device driver doesn't set dev->driver_data to NULL after freeing the corresponding data structure. This leads to a use after free bug in the freeze/thaw suspend/resume functions after the device has been opened and closed once. Fix this by clearing dev->driver_data in the close() function. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- drivers/s390/char/monreader.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c index 89ece1c235a..66e21dd2315 100644 --- a/drivers/s390/char/monreader.c +++ b/drivers/s390/char/monreader.c @@ -357,6 +357,7 @@ static int mon_close(struct inode *inode, struct file *filp) atomic_set(&monpriv->msglim_count, 0); monpriv->write_index = 0; monpriv->read_index = 0; + dev_set_drvdata(monreader_device, NULL); for (i = 0; i < MON_MSGLIM; i++) kfree(monpriv->msg_array[i]); -- GitLab From b89031e087a47819be48028e62cebade5f9fb75b Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 13 Nov 2009 15:43:52 +0100 Subject: [PATCH 0820/1165] [S390] reset cputime accounting after IPL from NSS After an IPL from NSS the uptime of the system is incorrect. The reason is that the startup code in head.S is not executed in case of an IPL from NSS. Due to that sched_clock_base_cc which is used to initialze wall_to_monotonic contains the time stamp when the NSS has been created instead of the time stamp of the system start. Reinitialize the cputime accounting values in create_kernel_nss after the SAVESYS CP command that created the NSS segment. Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/early.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index bf8b4ae7ff2..e49e9e0c69f 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -55,6 +55,7 @@ static void __init reset_tod_clock(void) disabled_wait(0); sched_clock_base_cc = TOD_UNIX_EPOCH; + S390_lowcore.last_update_clock = sched_clock_base_cc; } #ifdef CONFIG_SHARED_KERNEL @@ -167,6 +168,14 @@ static noinline __init void create_kernel_nss(void) return; } + /* re-initialize cputime accounting. */ + sched_clock_base_cc = get_clock(); + S390_lowcore.last_update_clock = sched_clock_base_cc; + S390_lowcore.last_update_timer = 0x7fffffffffffffffULL; + S390_lowcore.user_timer = 0; + S390_lowcore.system_timer = 0; + asm volatile("SPT 0(%0)" : : "a" (&S390_lowcore.last_update_timer)); + /* re-setup boot command line with new ipl vm parms */ ipl_update_parameters(); setup_boot_command_line(); -- GitLab From 8b94c1ed4d8232a452aa9db0f5ac9141d942590f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 13 Nov 2009 15:43:53 +0100 Subject: [PATCH 0821/1165] [S390] sclp: undo quiesce handler override on resume In a system where the ctrl-alt-del init action initiated by signal quiesce suspends the machine the quiesce handler override for _machine_restart, _machine_halt and _machine_power_off needs to be undone, otherwise the override is still present in the resumed system. The next shutdown would then load the quiesce state psw instead of performing the correct shutdown action. Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_quiesce.c | 48 +++++++++++++++++++++++++------- 1 file changed, 38 insertions(+), 10 deletions(-) diff --git a/drivers/s390/char/sclp_quiesce.c b/drivers/s390/char/sclp_quiesce.c index 84c191c1cd6..05909a7df8b 100644 --- a/drivers/s390/char/sclp_quiesce.c +++ b/drivers/s390/char/sclp_quiesce.c @@ -20,9 +20,12 @@ #include "sclp.h" +static void (*old_machine_restart)(char *); +static void (*old_machine_halt)(void); +static void (*old_machine_power_off)(void); + /* Shutdown handler. Signal completion of shutdown by loading special PSW. */ -static void -do_machine_quiesce(void) +static void do_machine_quiesce(void) { psw_t quiesce_psw; @@ -33,23 +36,48 @@ do_machine_quiesce(void) } /* Handler for quiesce event. Start shutdown procedure. */ -static void -sclp_quiesce_handler(struct evbuf_header *evbuf) +static void sclp_quiesce_handler(struct evbuf_header *evbuf) { - _machine_restart = (void *) do_machine_quiesce; - _machine_halt = do_machine_quiesce; - _machine_power_off = do_machine_quiesce; + if (_machine_restart != (void *) do_machine_quiesce) { + old_machine_restart = _machine_restart; + old_machine_halt = _machine_halt; + old_machine_power_off = _machine_power_off; + _machine_restart = (void *) do_machine_quiesce; + _machine_halt = do_machine_quiesce; + _machine_power_off = do_machine_quiesce; + } ctrl_alt_del(); } +/* Undo machine restart/halt/power_off modification on resume */ +static void sclp_quiesce_pm_event(struct sclp_register *reg, + enum sclp_pm_event sclp_pm_event) +{ + switch (sclp_pm_event) { + case SCLP_PM_EVENT_RESTORE: + if (old_machine_restart) { + _machine_restart = old_machine_restart; + _machine_halt = old_machine_halt; + _machine_power_off = old_machine_power_off; + old_machine_restart = NULL; + old_machine_halt = NULL; + old_machine_power_off = NULL; + } + break; + case SCLP_PM_EVENT_FREEZE: + case SCLP_PM_EVENT_THAW: + break; + } +} + static struct sclp_register sclp_quiesce_event = { .receive_mask = EVTYP_SIGQUIESCE_MASK, - .receiver_fn = sclp_quiesce_handler + .receiver_fn = sclp_quiesce_handler, + .pm_event_fn = sclp_quiesce_pm_event }; /* Initialize quiesce driver. */ -static int __init -sclp_quiesce_init(void) +static int __init sclp_quiesce_init(void) { return sclp_register(&sclp_quiesce_event); } -- GitLab From bcc6525fb23d2cec7ffdf908d98826a66823bcb2 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Fri, 13 Nov 2009 15:43:54 +0100 Subject: [PATCH 0822/1165] [S390] s390: fix single stepping on svc0 On s390 there are two ways of specifying the system call number for the svc instruction. The standard way is to use the immediate field in the instruction (or to use EXecute for values unknown during assemble time). This can encode 256 system calls. The kernel ABI also allows to put the system call number in r1 and then execute svc 0 to enable system call numbers > 255. It turns out that single stepping svc 0 is broken, since the PER program check handler uses r1. We have to use a different register. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 8 ++++---- arch/s390/kernel/entry64.S | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index f43d2ee5446..48215d15762 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -565,10 +565,10 @@ pgm_svcper: lh %r7,0x8a # get svc number from lowcore l %r9,__LC_THREAD_INFO # load pointer to thread_info struct TRACE_IRQS_OFF - l %r1,__TI_task(%r9) - mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID - mvc __THREAD_per+__PER_address(4,%r1),__LC_PER_ADDRESS - mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID + l %r8,__TI_task(%r9) + mvc __THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID + mvc __THREAD_per+__PER_address(4,%r8),__LC_PER_ADDRESS + mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID oi __TI_flags+3(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP TRACE_IRQS_ON stosm __SF_EMPTY(%r15),0x03 # reenable interrupts diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index a6f7b20df61..9aff1d449b6 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -543,10 +543,10 @@ pgm_svcper: mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct - lg %r1,__TI_task(%r9) - mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID - mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS - mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID + lg %r8,__TI_task(%r9) + mvc __THREAD_per+__PER_atmid(2,%r8),__LC_PER_ATMID + mvc __THREAD_per+__PER_address(8,%r8),__LC_PER_ADDRESS + mvc __THREAD_per+__PER_access_id(1,%r8),__LC_PER_ACCESS_ID oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP TRACE_IRQS_ON stosm __SF_EMPTY(%r15),0x03 # reenable interrupts -- GitLab From da0bac33413b2888d3623dad3ad19ce76b688f07 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 2 Nov 2009 11:33:46 -0800 Subject: [PATCH 0823/1165] MIPS: Fix emulation of 64-bit FPU on FPU-less 64-bit CPUs. Running a 64-bit kernel on a 64-bit CPU without an FPU would cause the emulator to run in 32-bit mode. The c0_Status.FR bit is wired to zero on systems without an FPU, so using that bit to decide how the emulator behaves doesn't allow for proper emulation on 64-bit FPU-less processors. Instead, we need to select the emulator mode based on the user-space ABI. Since the thread flag TIF_32BIT_REGS is used to set c0_Status.FR, we can just use it to decide if the emulator should be in 32-bit or 64-bit mode. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- arch/mips/math-emu/cp1emu.c | 41 +++++++++++++++++++------------------ 1 file changed, 21 insertions(+), 20 deletions(-) diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 890f77927d6..454b5392449 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -163,33 +163,34 @@ static int isBranchInstr(mips_instruction * i) /* * In the Linux kernel, we support selection of FPR format on the - * basis of the Status.FR bit. This does imply that, if a full 32 - * FPRs are desired, there needs to be a flip-flop that can be written - * to one at that bit position. In any case, O32 MIPS ABI uses - * only the even FPRs (Status.FR = 0). + * basis of the Status.FR bit. If an FPU is not present, the FR bit + * is hardwired to zero, which would imply a 32-bit FPU even for + * 64-bit CPUs. For 64-bit kernels with no FPU we use TIF_32BIT_REGS + * as a proxy for the FR bit so that a 64-bit FPU is emulated. In any + * case, for a 32-bit kernel which uses the O32 MIPS ABI, only the + * even FPRs are used (Status.FR = 0). */ - -#define CP0_STATUS_FR_SUPPORT - -#ifdef CP0_STATUS_FR_SUPPORT -#define FR_BIT ST0_FR +static inline int cop1_64bit(struct pt_regs *xcp) +{ + if (cpu_has_fpu) + return xcp->cp0_status & ST0_FR; +#ifdef CONFIG_64BIT + return !test_thread_flag(TIF_32BIT_REGS); #else -#define FR_BIT 0 + return 0; #endif +} + +#define SIFROMREG(si, x) ((si) = cop1_64bit(xcp) || !(x & 1) ? \ + (int)ctx->fpr[x] : (int)(ctx->fpr[x & ~1] >> 32)) -#define SIFROMREG(si, x) ((si) = \ - (xcp->cp0_status & FR_BIT) || !(x & 1) ? \ - (int)ctx->fpr[x] : \ - (int)(ctx->fpr[x & ~1] >> 32 )) -#define SITOREG(si, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] = \ - (xcp->cp0_status & FR_BIT) || !(x & 1) ? \ +#define SITOREG(si, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = \ + cop1_64bit(xcp) || !(x & 1) ? \ ctx->fpr[x & ~1] >> 32 << 32 | (u32)(si) : \ ctx->fpr[x & ~1] << 32 >> 32 | (u64)(si) << 32) -#define DIFROMREG(di, x) ((di) = \ - ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)]) -#define DITOREG(di, x) (ctx->fpr[x & ~((xcp->cp0_status & FR_BIT) == 0)] \ - = (di)) +#define DIFROMREG(di, x) ((di) = ctx->fpr[x & ~(cop1_64bit(xcp) == 0)]) +#define DITOREG(di, x) (ctx->fpr[x & ~(cop1_64bit(xcp) == 0)] = (di)) #define SPFROMREG(sp, x) SIFROMREG((sp).bits, x) #define SPTOREG(sp, x) SITOREG((sp).bits, x) -- GitLab From f8ac04255dc8baa1c018e8028222d842efa56e6b Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Thu, 4 Jun 2009 00:16:04 +0900 Subject: [PATCH 0824/1165] MIPS: Add DMA declare coherent memory support The ohci-sm501 driver requires dma_declare_coherent_memory(). It is used by the driver's local memory allocation with dma_alloc_coherent(). Tested on TANBAC TB0287(VR4131 + SM501). [Ralf: Fixed reject in dma-default.c and removed the entire #if 0'ed block in dma-mapping.h instead of just the #if 0.] Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + arch/mips/include/asm/dma-mapping.h | 11 +---------- arch/mips/mm/dma-default.c | 7 +++++++ 3 files changed, 9 insertions(+), 10 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 03bd56a2fb6..1aad0d9f507 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1,6 +1,7 @@ config MIPS bool default y + select HAVE_GENERIC_DMA_COHERENT select HAVE_IDE select HAVE_OPROFILE select HAVE_ARCH_KGDB diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h index d16afddb09a..664ba53dc32 100644 --- a/arch/mips/include/asm/dma-mapping.h +++ b/arch/mips/include/asm/dma-mapping.h @@ -3,6 +3,7 @@ #include #include +#include void *dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag); @@ -73,14 +74,4 @@ extern int dma_is_consistent(struct device *dev, dma_addr_t dma_addr); extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction); -#if 0 -#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY - -extern int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags); -extern void dma_release_declared_memory(struct device *dev); -extern void * dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size); -#endif - #endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index 7e48e76148a..9367e33fbd1 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -90,6 +90,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size, { void *ret; + if (dma_alloc_from_coherent(dev, size, dma_handle, &ret)) + return ret; + gfp = massage_gfp_flags(dev, gfp); ret = (void *) __get_free_pages(gfp, get_order(size)); @@ -122,6 +125,10 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t dma_handle) { unsigned long addr = (unsigned long) vaddr; + int order = get_order(size); + + if (dma_release_from_coherent(dev, order, vaddr)) + return; plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL); -- GitLab From c4304529543114a5df7eeec31ec5ee5c7c924738 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Sun, 8 Nov 2009 02:20:37 +0900 Subject: [PATCH 0825/1165] MIPS: Make local arrays with CL_SIZE static __initdata Since commit 22242681cff52bfb7cba5d2a37b91802be7a4e4c ("MIPS: Extend COMMAND_LINE_SIZE"), CL_SIZE is 4096 and local array variables with this size will cause an build failure with default CONFIG_FRAME_WARN settings. Although current users of such array variables are all early bootstrap code and not likely to cause real stack overflow (thread_info corruption), it is preferable to to declare these arrays static with __initdata. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/bcm47xx/prom.c | 2 +- arch/mips/mti-malta/malta-memory.c | 3 ++- arch/mips/rb532/prom.c | 2 +- arch/mips/txx9/generic/setup.c | 4 ++-- 4 files changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c index 079e33d5278..fb284c3b2cf 100644 --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c @@ -100,7 +100,7 @@ static __init void prom_init_console(void) static __init void prom_init_cmdline(void) { - char buf[CL_SIZE]; + static char buf[CL_SIZE] __initdata; /* Get the kernel command line from CFE */ if (cfe_getenv("LINUX_CMDLINE", buf, CL_SIZE) >= 0) { diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index 61888ff72c8..9035c64bc5e 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -54,7 +54,8 @@ static struct prom_pmemblock * __init prom_getmdesc(void) { char *memsize_str; unsigned int memsize; - char cmdline[CL_SIZE], *ptr; + char *ptr; + static char cmdline[CL_SIZE] __initdata; /* otherwise look in the environment */ memsize_str = prom_getenv("memsize"); diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c index 46ca24dbcc2..ad5bd109797 100644 --- a/arch/mips/rb532/prom.c +++ b/arch/mips/rb532/prom.c @@ -69,7 +69,7 @@ static inline unsigned long tag2ul(char *arg, const char *tag) void __init prom_setup_cmdline(void) { - char cmd_line[CL_SIZE]; + static char cmd_line[CL_SIZE] __initdata; char *cp, *board; int prom_argc; char **prom_argv, **prom_envp; diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index e10184c1b3e..d66802edebb 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -160,7 +160,7 @@ static void __init prom_init_cmdline(void) int argc; int *argv32; int i; /* Always ignore the "-c" at argv[0] */ - char builtin[CL_SIZE]; + static char builtin[CL_SIZE] __initdata; if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) { /* @@ -315,7 +315,7 @@ static inline void txx9_cache_fixup(void) static void __init preprocess_cmdline(void) { - char cmdline[CL_SIZE]; + static char cmdline[CL_SIZE] __initdata; char *s; strcpy(cmdline, arcs_cmdline); -- GitLab From 1b12a9c87792550a3d7f5f39eb529c822b911b17 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 11 Nov 2009 21:38:46 +0900 Subject: [PATCH 0826/1165] MIPS: TXx9: Update rbtx49xx_defconfig Enable following features: * MTD (RBTX4939, NAND_TXX9NDFMC) * HW_RANDOM (HW_RANDOM_TX4939) * SOUND (SND_SOC_TXX9ACLC) * DMADEVICE (TXX9_DMAC) Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- arch/mips/configs/rbtx49xx_defconfig | 252 ++++++++++++++++++++------- 1 file changed, 192 insertions(+), 60 deletions(-) diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index c69813b8488..6c6a19aebe1 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc7 -# Wed Mar 4 23:08:06 2009 +# Linux kernel version: 2.6.32-rc6 +# Sun Nov 8 22:59:47 2009 # CONFIG_MIPS=y @@ -9,16 +9,18 @@ CONFIG_MIPS=y # Machine selection # # CONFIG_MACH_ALCHEMY is not set +# CONFIG_AR7 is not set # CONFIG_BASLER_EXCITE is not set # CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MACH_EMMA is not set +# CONFIG_NEC_MARKEINS is not set # CONFIG_MACH_VR41XX is not set # CONFIG_NXP_STB220 is not set # CONFIG_NXP_STB225 is not set @@ -45,6 +47,7 @@ CONFIG_MACH_TX49XX=y # CONFIG_WR_PPMC is not set # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set CONFIG_MACH_TXX9=y CONFIG_TOSHIBA_RBTX4927=y CONFIG_TOSHIBA_RBTX4938=y @@ -86,7 +89,6 @@ CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y -# CONFIG_HOTPLUG_CPU is not set # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_GPIO=y CONFIG_CPU_BIG_ENDIAN=y @@ -101,7 +103,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # -# CONFIG_CPU_LOONGSON2 is not set +# CONFIG_CPU_LOONGSON2E is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -137,6 +139,7 @@ CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y @@ -154,7 +157,10 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -175,6 +181,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -194,11 +201,12 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -209,8 +217,12 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y @@ -220,25 +232,35 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y # CONFIG_PCSPKR_PLATFORM is not set -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -CONFIG_ANON_INODES=y +CONFIG_FUTEX=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y +CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -246,8 +268,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -274,6 +296,7 @@ CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_MMU=y # @@ -288,6 +311,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set CONFIG_NET=y @@ -295,7 +319,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -311,6 +334,7 @@ CONFIG_IP_PNP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -336,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -347,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_PHONET is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set @@ -365,9 +389,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AR7_PARTS is not set @@ -376,9 +400,9 @@ CONFIG_MTD_CMDLINE_PARTS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y -# CONFIG_MTD_BLKDEVS is not set -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +CONFIG_MTD_BLOCK_RO=m # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set @@ -414,16 +438,20 @@ CONFIG_MTD_CFI_UTIL=y # # Mapping drivers for chip access # -# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_GPIO_ADDR is not set # CONFIG_MTD_INTEL_VR_NOR is not set +CONFIG_MTD_RBTX4939=y # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -435,7 +463,15 @@ CONFIG_MTD_PHYSMAP=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=m +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=m +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_TXX9NDFMC=m # CONFIG_MTD_ONENAND is not set # @@ -471,6 +507,7 @@ CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y CONFIG_IDE_TIMINGS=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y @@ -534,8 +571,13 @@ CONFIG_BLK_DEV_IDEDMA=y # # -# A new alternative FireWire stack is available with EXPERIMENTAL=y +# You can enable one or both FireWire driver stacks. # + +# +# See the help texts for more information. +# +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y @@ -574,6 +616,8 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set CONFIG_SMC91X=y # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set CONFIG_NE2000=y @@ -602,18 +646,15 @@ CONFIG_TC35815=y # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -653,6 +694,7 @@ CONFIG_DEVKMEM=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_TXX9=y @@ -666,7 +708,9 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_TX4939=m # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -686,6 +730,10 @@ CONFIG_SPI_TXX9=y # SPI Protocol Masters # # CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y @@ -701,17 +749,22 @@ CONFIG_GPIOLIB=y # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_LANGWELL is not set # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -740,28 +793,17 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_EZX_PCAP is not set # CONFIG_REGULATOR is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # +# CONFIG_VGA_ARB is not set # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -772,7 +814,42 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set +CONFIG_SOUND=m +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=m +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_PCI is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_MIPS is not set +CONFIG_SND_SOC=m +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_TXX9ACLC=m +CONFIG_HAS_TXX9_ACLC=y +CONFIG_SND_SOC_TXX9ACLC_AC97=m +CONFIG_SND_SOC_TXX9ACLC_GENERIC=m +CONFIG_SND_SOC_I2C_AND_SPI=m +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AC97_CODEC=m +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -783,6 +860,8 @@ CONFIG_LEDS_CLASS=y # LED drivers # CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_DAC124S085 is not set # # LED Triggers @@ -792,7 +871,12 @@ CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_IDE_DISK=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y @@ -820,6 +904,7 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y # CONFIG_RTC_DRV_R9701 is not set CONFIG_RTC_DRV_RS5C348=y # CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # # Platform RTC drivers @@ -840,8 +925,26 @@ CONFIG_RTC_DRV_DS1742=y # on-CPU RTC drivers # CONFIG_RTC_DRV_TX4939=y -# CONFIG_DMADEVICES is not set +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +CONFIG_TXX9_DMAC=m +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -853,9 +956,10 @@ CONFIG_RTC_DRV_TX4939=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -865,6 +969,10 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y +# +# Caches +# + # # CD-ROM/DVD Filesystems # @@ -890,7 +998,27 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set -# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_HFSPLUS_FS is not set +CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -922,6 +1050,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set @@ -929,11 +1058,9 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y - -# -# Tracers -# -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_CMDLINE="" @@ -946,6 +1073,7 @@ CONFIG_CMDLINE="" # CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines @@ -959,6 +1087,10 @@ CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_DECOMPRESS_GZIP=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y -- GitLab From 5df9d11be46a9f704208644a1e7f13c6104ecff2 Mon Sep 17 00:00:00 2001 From: "Kevin D. Kissell" Date: Tue, 10 Nov 2009 11:45:46 -0800 Subject: [PATCH 0827/1165] MIPS: SMTC: Fix lockup in smtc_distribute_timer 1. At the end of smtc_distribute_timer, nextstamp is valid and has already passed so we goto repeat. 2. Nothing updates nextstamp (only updated if the timeout is in the future And we just decided it is in the past) 3. At the end nextstamp still has the same value so it is still valid and in the past. 4. This repeats until read_c0_count has a value which causes nextstamp to be in the future. Reported and initial patch and testing by Mikael Starvik . Signed-off-by: Kevin D. Kissell Cc: Mikael Starvik Cc: linux-mips@linux-mips.org Cc: Jesper Nilsson Patchwork: http://patchwork.linux-mips.org/patch/621/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cevt-smtc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c index 98bd7de7577..b102e4f1630 100644 --- a/arch/mips/kernel/cevt-smtc.c +++ b/arch/mips/kernel/cevt-smtc.c @@ -173,11 +173,12 @@ void smtc_distribute_timer(int vpe) unsigned int mtflags; int cpu; struct clock_event_device *cd; - unsigned long nextstamp = 0L; + unsigned long nextstamp; unsigned long reference; repeat: + nextstamp = 0L; for_each_online_cpu(cpu) { /* * Find virtual CPUs within the current VPE who have -- GitLab From 2bf30108435339c4cf149f9d279d0dc961345393 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Thu, 12 Nov 2009 20:31:14 +0100 Subject: [PATCH 0828/1165] [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus Disable propagation of mbus errors to the CPU local bus, as this causes mbus errors (which can occur for example for PCI aborts) to throw CPU aborts, which we're not set up to deal with. Reported-by: Dieter Kiermaier Signed-off-by: Lennert Buytenhek Signed-off-by: Nicolas Pitre --- arch/arm/mach-kirkwood/common.c | 8 ++++++++ arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 3 +++ 2 files changed, 11 insertions(+) diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 7177c4aa634..242dd077534 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -915,6 +915,14 @@ void __init kirkwood_init(void) kirkwood_uart0_data[0].uartclk = kirkwood_tclk; kirkwood_uart1_data[0].uartclk = kirkwood_tclk; + /* + * Disable propagation of mbus errors to the CPU local bus, + * as this causes mbus errors (which can occur for example + * for PCI aborts) to throw CPU aborts, which we're not set + * up to deal with. + */ + writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG); + kirkwood_setup_cpu_mbus(); #ifdef CONFIG_CACHE_FEROCEON_L2 diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 9e80d9232c8..418f5017c50 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -13,6 +13,9 @@ #include +#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0100) +#define CPU_CONFIG_ERROR_PROP 0x00000004 + #define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) #define CPU_RESET 0x00000002 -- GitLab From d792c1006fe92448217b71513d3955868358271d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Fri, 13 Nov 2009 13:56:33 -0800 Subject: [PATCH 0829/1165] tcp: provide more information on the tcp receive_queue bugs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The addition of rcv_nxt allows to discern whether the skb was out of place or tp->copied. Also catch fancy combination of flags if necessary (sadly we might miss the actual causer flags as it might have already returned). Btw, we perhaps would want to forward copied_seq in somewhere or otherwise we might have some nice loop with WARN stuff within but where to do that safely I don't know at this stage until more is known (but it is not made significantly worse by this patch). Signed-off-by: Ilpo Järvinen Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 98440ad8255..f1813bc7108 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1183,7 +1183,9 @@ void tcp_cleanup_rbuf(struct sock *sk, int copied) #if TCP_DEBUG struct sk_buff *skb = skb_peek(&sk->sk_receive_queue); - WARN_ON(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq)); + WARN(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq), + KERN_INFO "cleanup rbuf bug: copied %X seq %X rcvnxt %X\n", + tp->copied_seq, TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt); #endif if (inet_csk_ack_scheduled(sk)) { @@ -1430,11 +1432,13 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, /* Now that we have two receive queues this * shouldn't happen. */ - if (before(*seq, TCP_SKB_CB(skb)->seq)) { - printk(KERN_INFO "recvmsg bug: copied %X " - "seq %X\n", *seq, TCP_SKB_CB(skb)->seq); + if (WARN(before(*seq, TCP_SKB_CB(skb)->seq), + KERN_INFO "recvmsg bug: copied %X " + "seq %X rcvnxt %X fl %X\n", *seq, + TCP_SKB_CB(skb)->seq, tp->rcv_nxt, + flags)) break; - } + offset = *seq - TCP_SKB_CB(skb)->seq; if (tcp_hdr(skb)->syn) offset--; @@ -1443,8 +1447,9 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, if (tcp_hdr(skb)->fin) goto found_fin_ok; WARN(!(flags & MSG_PEEK), KERN_INFO "recvmsg bug 2: " - "copied %X seq %X\n", *seq, - TCP_SKB_CB(skb)->seq); + "copied %X seq %X rcvnxt %X fl %X\n", + *seq, TCP_SKB_CB(skb)->seq, + tp->rcv_nxt, flags); } /* Well, if we have backlog, try to process it now yet. */ -- GitLab From 8cc3174ef98fbb317d9ee18e20102908ff7faffc Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 13 Nov 2009 16:56:13 -0500 Subject: [PATCH 0830/1165] Revert "libipw: initiate cfg80211 API conversion" This reverts commit b8ecd988b1670035a05035c553c08331214d6603. Due to poor API call balancing by me, this commit not only broke ipw2200 if it can't find it's firmware, it broke ipw2100 basically anytime you removed the module. At this point in the cycle, let's just put it back to a sane state and try again next time... Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2100.c | 6 +- drivers/net/wireless/ipw2x00/ipw2200.c | 141 ++++--------------- drivers/net/wireless/ipw2x00/libipw.h | 8 +- drivers/net/wireless/ipw2x00/libipw_module.c | 42 +----- 4 files changed, 36 insertions(+), 161 deletions(-) diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 240cff1e697..6e2fc0cb6f8 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6029,7 +6029,7 @@ static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev, struct ipw2100_priv *priv; struct net_device *dev; - dev = alloc_ieee80211(sizeof(struct ipw2100_priv), 0); + dev = alloc_ieee80211(sizeof(struct ipw2100_priv)); if (!dev) return NULL; priv = libipw_priv(dev); @@ -6342,7 +6342,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group); - free_ieee80211(dev, 0); + free_ieee80211(dev); pci_set_drvdata(pci_dev, NULL); } @@ -6400,7 +6400,7 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) if (dev->base_addr) iounmap((void __iomem *)dev->base_addr); - free_ieee80211(dev, 0); + free_ieee80211(dev); } pci_release_regions(pci_dev); diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 8d58e6ed4e7..0d30a9e2d3d 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -103,25 +103,6 @@ static int antenna = CFG_SYS_ANTENNA_BOTH; static int rtap_iface = 0; /* def: 0 -- do not create rtap interface */ #endif -static struct ieee80211_rate ipw2200_rates[] = { - { .bitrate = 10 }, - { .bitrate = 20, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 55, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 110, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, - { .bitrate = 60 }, - { .bitrate = 90 }, - { .bitrate = 120 }, - { .bitrate = 180 }, - { .bitrate = 240 }, - { .bitrate = 360 }, - { .bitrate = 480 }, - { .bitrate = 540 } -}; - -#define ipw2200_a_rates (ipw2200_rates + 4) -#define ipw2200_num_a_rates 8 -#define ipw2200_bg_rates (ipw2200_rates + 0) -#define ipw2200_num_bg_rates 12 #ifdef CONFIG_IPW2200_QOS static int qos_enable = 0; @@ -8673,6 +8654,24 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option) * */ +static int ipw_wx_get_name(struct net_device *dev, + struct iw_request_info *info, + union iwreq_data *wrqu, char *extra) +{ + struct ipw_priv *priv = libipw_priv(dev); + mutex_lock(&priv->mutex); + if (priv->status & STATUS_RF_KILL_MASK) + strcpy(wrqu->name, "radio off"); + else if (!(priv->status & STATUS_ASSOCIATED)) + strcpy(wrqu->name, "unassociated"); + else + snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11%c", + ipw_modes[priv->assoc_request.ieee_mode]); + IPW_DEBUG_WX("Name: %s\n", wrqu->name); + mutex_unlock(&priv->mutex); + return 0; +} + static int ipw_set_channel(struct ipw_priv *priv, u8 channel) { if (channel == 0) { @@ -9972,7 +9971,7 @@ static int ipw_wx_sw_reset(struct net_device *dev, /* Rebase the WE IOCTLs to zero for the handler array */ #define IW_IOCTL(x) [(x)-SIOCSIWCOMMIT] static iw_handler ipw_wx_handlers[] = { - IW_IOCTL(SIOCGIWNAME) = (iw_handler) cfg80211_wext_giwname, + IW_IOCTL(SIOCGIWNAME) = ipw_wx_get_name, IW_IOCTL(SIOCSIWFREQ) = ipw_wx_set_freq, IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq, IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode, @@ -11416,100 +11415,16 @@ static void ipw_bg_down(struct work_struct *work) /* Called by register_netdev() */ static int ipw_net_init(struct net_device *dev) { - int i, rc = 0; struct ipw_priv *priv = libipw_priv(dev); - const struct libipw_geo *geo = libipw_get_geo(priv->ieee); - struct wireless_dev *wdev = &priv->ieee->wdev; mutex_lock(&priv->mutex); if (ipw_up(priv)) { - rc = -EIO; - goto out; - } - - memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); - - /* fill-out priv->ieee->bg_band */ - if (geo->bg_channels) { - struct ieee80211_supported_band *bg_band = &priv->ieee->bg_band; - - bg_band->band = IEEE80211_BAND_2GHZ; - bg_band->n_channels = geo->bg_channels; - bg_band->channels = - kzalloc(geo->bg_channels * - sizeof(struct ieee80211_channel), GFP_KERNEL); - /* translate geo->bg to bg_band.channels */ - for (i = 0; i < geo->bg_channels; i++) { - bg_band->channels[i].band = IEEE80211_BAND_2GHZ; - bg_band->channels[i].center_freq = geo->bg[i].freq; - bg_band->channels[i].hw_value = geo->bg[i].channel; - bg_band->channels[i].max_power = geo->bg[i].max_power; - if (geo->bg[i].flags & LIBIPW_CH_PASSIVE_ONLY) - bg_band->channels[i].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; - if (geo->bg[i].flags & LIBIPW_CH_NO_IBSS) - bg_band->channels[i].flags |= - IEEE80211_CHAN_NO_IBSS; - if (geo->bg[i].flags & LIBIPW_CH_RADAR_DETECT) - bg_band->channels[i].flags |= - IEEE80211_CHAN_RADAR; - /* No equivalent for LIBIPW_CH_80211H_RULES, - LIBIPW_CH_UNIFORM_SPREADING, or - LIBIPW_CH_B_ONLY... */ - } - /* point at bitrate info */ - bg_band->bitrates = ipw2200_bg_rates; - bg_band->n_bitrates = ipw2200_num_bg_rates; - - wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = bg_band; - } - - /* fill-out priv->ieee->a_band */ - if (geo->a_channels) { - struct ieee80211_supported_band *a_band = &priv->ieee->a_band; - - a_band->band = IEEE80211_BAND_5GHZ; - a_band->n_channels = geo->a_channels; - a_band->channels = - kzalloc(geo->a_channels * - sizeof(struct ieee80211_channel), GFP_KERNEL); - /* translate geo->bg to a_band.channels */ - for (i = 0; i < geo->a_channels; i++) { - a_band->channels[i].band = IEEE80211_BAND_2GHZ; - a_band->channels[i].center_freq = geo->a[i].freq; - a_band->channels[i].hw_value = geo->a[i].channel; - a_band->channels[i].max_power = geo->a[i].max_power; - if (geo->a[i].flags & LIBIPW_CH_PASSIVE_ONLY) - a_band->channels[i].flags |= - IEEE80211_CHAN_PASSIVE_SCAN; - if (geo->a[i].flags & LIBIPW_CH_NO_IBSS) - a_band->channels[i].flags |= - IEEE80211_CHAN_NO_IBSS; - if (geo->a[i].flags & LIBIPW_CH_RADAR_DETECT) - a_band->channels[i].flags |= - IEEE80211_CHAN_RADAR; - /* No equivalent for LIBIPW_CH_80211H_RULES, - LIBIPW_CH_UNIFORM_SPREADING, or - LIBIPW_CH_B_ONLY... */ - } - /* point at bitrate info */ - a_band->bitrates = ipw2200_a_rates; - a_band->n_bitrates = ipw2200_num_a_rates; - - wdev->wiphy->bands[IEEE80211_BAND_5GHZ] = a_band; - } - - set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev); - - /* With that information in place, we can now register the wiphy... */ - if (wiphy_register(wdev->wiphy)) { - rc = -EIO; - goto out; + mutex_unlock(&priv->mutex); + return -EIO; } -out: mutex_unlock(&priv->mutex); - return rc; + return 0; } /* PCI driver stuff */ @@ -11640,7 +11555,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv) if (priv->prom_net_dev) return -EPERM; - priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv), 1); + priv->prom_net_dev = alloc_ieee80211(sizeof(struct ipw_prom_priv)); if (priv->prom_net_dev == NULL) return -ENOMEM; @@ -11659,7 +11574,7 @@ static int ipw_prom_alloc(struct ipw_priv *priv) rc = register_netdev(priv->prom_net_dev); if (rc) { - free_ieee80211(priv->prom_net_dev, 1); + free_ieee80211(priv->prom_net_dev); priv->prom_net_dev = NULL; return rc; } @@ -11673,7 +11588,7 @@ static void ipw_prom_free(struct ipw_priv *priv) return; unregister_netdev(priv->prom_net_dev); - free_ieee80211(priv->prom_net_dev, 1); + free_ieee80211(priv->prom_net_dev); priv->prom_net_dev = NULL; } @@ -11701,7 +11616,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, struct ipw_priv *priv; int i; - net_dev = alloc_ieee80211(sizeof(struct ipw_priv), 0); + net_dev = alloc_ieee80211(sizeof(struct ipw_priv)); if (net_dev == NULL) { err = -ENOMEM; goto out; @@ -11849,7 +11764,7 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); out_free_ieee80211: - free_ieee80211(priv->net_dev, 0); + free_ieee80211(priv->net_dev); out: return err; } @@ -11916,7 +11831,7 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) pci_release_regions(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); - free_ieee80211(priv->net_dev, 0); + free_ieee80211(priv->net_dev); free_firmware(); } diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index bf45391172f..1e334ff6bd5 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -31,7 +31,6 @@ #include #include -#include #define LIBIPW_VERSION "git-1.1.13" @@ -784,15 +783,12 @@ struct libipw_geo { struct libipw_device { struct net_device *dev; - struct wireless_dev wdev; struct libipw_security sec; /* Bookkeeping structures */ struct libipw_stats ieee_stats; struct libipw_geo geo; - struct ieee80211_supported_band bg_band; - struct ieee80211_supported_band a_band; /* Probe / Beacon management */ struct list_head network_free_list; @@ -1018,8 +1014,8 @@ static inline int libipw_is_cck_rate(u8 rate) } /* ieee80211.c */ -extern void free_ieee80211(struct net_device *dev, int monitor); -extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); +extern void free_ieee80211(struct net_device *dev); +extern struct net_device *alloc_ieee80211(int sizeof_priv); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index a0e9f6aed7d..eb2b60834c1 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -62,9 +62,6 @@ MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_AUTHOR(DRV_COPYRIGHT); MODULE_LICENSE("GPL"); -struct cfg80211_ops libipw_config_ops = { }; -void *libipw_wiphy_privid = &libipw_wiphy_privid; - static int libipw_networks_allocate(struct libipw_device *ieee) { if (ieee->networks) @@ -143,7 +140,7 @@ int libipw_change_mtu(struct net_device *dev, int new_mtu) } EXPORT_SYMBOL(libipw_change_mtu); -struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) +struct net_device *alloc_ieee80211(int sizeof_priv) { struct libipw_device *ieee; struct net_device *dev; @@ -160,31 +157,10 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) ieee->dev = dev; - if (!monitor) { - ieee->wdev.wiphy = wiphy_new(&libipw_config_ops, 0); - if (!ieee->wdev.wiphy) { - LIBIPW_ERROR("Unable to allocate wiphy.\n"); - goto failed_free_netdev; - } - - ieee->dev->ieee80211_ptr = &ieee->wdev; - ieee->wdev.iftype = NL80211_IFTYPE_STATION; - - /* Fill-out wiphy structure bits we know... Not enough info - here to call set_wiphy_dev or set MAC address or channel info - -- have to do that in ->ndo_init... */ - ieee->wdev.wiphy->privid = libipw_wiphy_privid; - - ieee->wdev.wiphy->max_scan_ssids = 1; - ieee->wdev.wiphy->max_scan_ie_len = 0; - ieee->wdev.wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) - | BIT(NL80211_IFTYPE_ADHOC); - } - err = libipw_networks_allocate(ieee); if (err) { LIBIPW_ERROR("Unable to allocate beacon storage: %d\n", err); - goto failed_free_wiphy; + goto failed_free_netdev; } libipw_networks_initialize(ieee); @@ -217,31 +193,19 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor) return dev; -failed_free_wiphy: - if (!monitor) - wiphy_free(ieee->wdev.wiphy); failed_free_netdev: free_netdev(dev); failed: return NULL; } -void free_ieee80211(struct net_device *dev, int monitor) +void free_ieee80211(struct net_device *dev) { struct libipw_device *ieee = netdev_priv(dev); lib80211_crypt_info_free(&ieee->crypt_info); libipw_networks_free(ieee); - - /* free cfg80211 resources */ - if (!monitor) { - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); - wiphy_free(ieee->wdev.wiphy); - } - free_netdev(dev); } -- GitLab From 4a7bd3ec7aa305048b0e4791d056c52ac1f43ddf Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Sun, 8 Nov 2009 12:31:20 +0100 Subject: [PATCH 0831/1165] rt2x00: Update MAINTAINERS Add myself to the list of maintainers for the rt2x00 driver. Signed-off-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index b37e0cdd763..223d6976c08 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4281,6 +4281,7 @@ F: drivers/video/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project M: Ivo van Doorn +M: Gertjan van Wingerde L: linux-wireless@vger.kernel.org L: users@rt2x00.serialmonkey.com (moderated for non-subscribers) W: http://rt2x00.serialmonkey.com/ -- GitLab From 21d6c270f11c7d0ab5aafa48a6e79ba514f4e5e7 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 11 Nov 2009 18:02:29 -0600 Subject: [PATCH 0832/1165] p54usb: Remove DMA buffer from stack On 2.6.32-rc6 from wireless-testing, the following warning is emitted: ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:860 check_for_stack+0xaa/0xe0() Hardware name: HP Pavilion dv2700 Notebook PC ehci_hcd 0000:00:02.1: DMA-API: device driver maps memory fromstack [addr=ffff8800b6e2bca8] Modules linked in: Pid: 16378, comm: modprobe Not tainted 2.6.32-rc6-wl #244 Call Trace: [] warn_slowpath_common+0x78/0xb0 [] warn_slowpath_fmt+0x3c/0x40 [] check_for_stack+0xaa/0xe0 [] debug_dma_map_page+0xfd/0x170 [] usb_hcd_submit_urb+0x3da/0x9c0 [usbcore] [] ? lockdep_init_map+0x5f/0x5d0 [] usb_submit_urb+0xe5/0x260 [usbcore] [] usb_start_wait_urb+0x5e/0xf0 [usbcore] [] ? usb_init_urb+0x23/0x40 [usbcore] [] usb_bulk_msg+0xc4/0x150 [usbcore] [] T.719+0x31/0x40 [p54usb] [] p54u_upload_firmware_3887+0x2f/0x490 [p54usb] [] ? p54_parse_firmware+0x427/0x450 [p54common] ---[ end trace f77df0316ddad3de ]--- Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54usb.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 17e199546ee..92af9b96bb7 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -426,12 +426,16 @@ static const char p54u_romboot_3887[] = "~~~~"; static int p54u_firmware_reset_3887(struct ieee80211_hw *dev) { struct p54u_priv *priv = dev->priv; - u8 buf[4]; + u8 *buf; int ret; - memcpy(&buf, p54u_romboot_3887, sizeof(buf)); + buf = kmalloc(4, GFP_KERNEL); + if (!buf) + return -ENOMEM; + memcpy(buf, p54u_romboot_3887, 4); ret = p54u_bulk_msg(priv, P54U_PIPE_DATA, - buf, sizeof(buf)); + buf, 4); + kfree(buf); if (ret) dev_err(&priv->udev->dev, "(p54usb) unable to jump to " "boot ROM (%d)!\n", ret); -- GitLab From 505c92470bda486be589729514d3ed5302fb0551 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 12 Nov 2009 14:55:00 -0800 Subject: [PATCH 0833/1165] MAINTAINERS: RFKILL - Fix pattern entry missing colon Signed-off-by: Joe Perches Signed-off-by: John W. Linville --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 223d6976c08..887b50b27cc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4369,7 +4369,7 @@ RFKILL M: Johannes Berg L: linux-wireless@vger.kernel.org S: Maintained -F Documentation/rfkill.txt +F: Documentation/rfkill.txt F: net/rfkill/ RISCOM8 DRIVER -- GitLab From 1e360a60b24ad8f8685af66fa6de10ce46693a4b Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 13 Nov 2009 10:52:55 -0500 Subject: [PATCH 0834/1165] SUNRPC: Address buffer overrun in rpc_uaddr2sockaddr() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The size of buf[] must account for the string termination needed for the first strict_strtoul() call. Introduced in commit a02d6926. Fábio Olivé Leite points out that strict_strtoul() requires _either_ '\n\0' _or_ '\0' termination, so use the simpler '\0' here instead. See http://bugzilla.kernel.org/show_bug.cgi?id=14546 . Reported-by: argp@census-labs.com Signed-off-by: Chuck Lever Signed-off-by: Fábio Olivé Leite Signed-off-by: Trond Myklebust --- net/sunrpc/addr.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/net/sunrpc/addr.c b/net/sunrpc/addr.c index 22e8fd89477..c7450c8f0a7 100644 --- a/net/sunrpc/addr.c +++ b/net/sunrpc/addr.c @@ -306,24 +306,25 @@ EXPORT_SYMBOL_GPL(rpc_sockaddr2uaddr); * @sap: buffer into which to plant socket address * @salen: size of buffer * + * @uaddr does not have to be '\0'-terminated, but strict_strtoul() and + * rpc_pton() require proper string termination to be successful. + * * Returns the size of the socket address if successful; otherwise * zero is returned. */ size_t rpc_uaddr2sockaddr(const char *uaddr, const size_t uaddr_len, struct sockaddr *sap, const size_t salen) { - char *c, buf[RPCBIND_MAXUADDRLEN]; + char *c, buf[RPCBIND_MAXUADDRLEN + sizeof('\0')]; unsigned long portlo, porthi; unsigned short port; - if (uaddr_len > sizeof(buf)) + if (uaddr_len > RPCBIND_MAXUADDRLEN) return 0; memcpy(buf, uaddr, uaddr_len); - buf[uaddr_len] = '\n'; - buf[uaddr_len + 1] = '\0'; - + buf[uaddr_len] = '\0'; c = strrchr(buf, '.'); if (unlikely(c == NULL)) return 0; @@ -332,9 +333,7 @@ size_t rpc_uaddr2sockaddr(const char *uaddr, const size_t uaddr_len, if (unlikely(portlo > 255)) return 0; - c[0] = '\n'; - c[1] = '\0'; - + *c = '\0'; c = strrchr(buf, '.'); if (unlikely(c == NULL)) return 0; @@ -345,8 +344,7 @@ size_t rpc_uaddr2sockaddr(const char *uaddr, const size_t uaddr_len, port = (unsigned short)((porthi << 8) | portlo); - c[0] = '\0'; - + *c = '\0'; if (rpc_pton(buf, strlen(buf), sap, salen) == 0) return 0; -- GitLab From 7ab8f5244d6a8695688a91c8a3f6d3f40356ff97 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 2 Nov 2009 13:38:10 -0800 Subject: [PATCH 0835/1165] ocfs2: Refresh documentation Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker --- Documentation/filesystems/ocfs2.txt | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index c2a0871280a..c58b9f5ba00 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -20,15 +20,16 @@ Lots of code taken from ext3 and other projects. Authors in alphabetical order: Joel Becker Zach Brown -Mark Fasheh +Mark Fasheh Kurt Hackel +Tao Ma Sunil Mushran Manish Singh +Tiger Yang Caveats ======= Features which OCFS2 does not support yet: - - quotas - Directory change notification (F_NOTIFY) - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease) @@ -70,7 +71,6 @@ commit=nrsec (*) Ocfs2 can be told to sync all its data and metadata performance. localalloc=8(*) Allows custom localalloc size in MB. If the value is too large, the fs will silently revert it to the default. - Localalloc is not enabled for local mounts. localflocks This disables cluster aware flock. inode64 Indicates that Ocfs2 is allowed to create inodes at any location in the filesystem, including those which -- GitLab From 7aee47b0bb9f93baecdbea205e878fe0f155f7da Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Fri, 6 Nov 2009 14:50:22 -0800 Subject: [PATCH 0836/1165] ocfs2: Trivial cleanup of jbd compatibility layer removal Mainline commit 53ef99cad9878f02f27bb30bc304fc42af8bdd6e removed the JBD compatibility layer from OCFS2. This patch removes the last remaining remnants of that. Signed-off-by: Sunil Mushran Signed-off-by: Joel Becker --- fs/ocfs2/ocfs2.h | 7 +------ fs/ocfs2/uptodate.c | 5 ----- 2 files changed, 1 insertion(+), 11 deletions(-) diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index eae40460242..d963d863870 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -35,12 +35,7 @@ #include #include #include -#ifndef CONFIG_OCFS2_COMPAT_JBD -# include -#else -# include -# include "ocfs2_jbd_compat.h" -#endif +#include /* For union ocfs2_dlm_lksb */ #include "stackglue.h" diff --git a/fs/ocfs2/uptodate.c b/fs/ocfs2/uptodate.c index b6284f235d2..c61369342a2 100644 --- a/fs/ocfs2/uptodate.c +++ b/fs/ocfs2/uptodate.c @@ -53,11 +53,6 @@ #include #include #include -#ifndef CONFIG_OCFS2_COMPAT_JBD -# include -#else -# include -#endif #define MLOG_MASK_PREFIX ML_UPTODATE -- GitLab From 409b95aff3583c05ac7a9247fa3d8c9aa7f9cae3 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Tue, 10 Nov 2009 08:57:34 +0000 Subject: [PATCH 0837/1165] sctp: Set source addresses on the association before adding transports Recent commit 8da645e101a8c20c6073efda3c7cc74eec01b87f sctp: Get rid of an extra routing lookup when adding a transport introduced a regression in the connection setup. The behavior was different between IPv4 and IPv6. IPv4 case ended up working because the route lookup routing returned a NULL route, which triggered another route lookup later in the output patch that succeeded. In the IPv6 case, a valid route was returned for first call, but we could not find a valid source address at the time since the source addresses were not set on the association yet. Thus resulted in a hung connection. The solution is to set the source addresses on the association prior to adding peers. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 2 +- net/sctp/associola.c | 4 +--- net/sctp/sm_statefuns.c | 15 +++++++++------ net/sctp/socket.c | 22 ++++++++++++---------- 4 files changed, 23 insertions(+), 20 deletions(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 6e5f0e0c796..cd2e18778f8 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -1980,7 +1980,7 @@ void sctp_assoc_set_primary(struct sctp_association *, void sctp_assoc_del_nonprimary_peers(struct sctp_association *, struct sctp_transport *); int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *, - gfp_t); + sctp_scope_t, gfp_t); int sctp_assoc_set_bind_addr_from_cookie(struct sctp_association *, struct sctp_cookie*, gfp_t gfp); diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 8450960df24..7eed77a39d0 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -1485,15 +1485,13 @@ void sctp_assoc_rwnd_decrease(struct sctp_association *asoc, unsigned len) * local endpoint and the remote peer. */ int sctp_assoc_set_bind_addr_from_ep(struct sctp_association *asoc, - gfp_t gfp) + sctp_scope_t scope, gfp_t gfp) { - sctp_scope_t scope; int flags; /* Use scoping rules to determine the subset of addresses from * the endpoint. */ - scope = sctp_scope(&asoc->peer.active_path->ipaddr); flags = (PF_INET6 == asoc->base.sk->sk_family) ? SCTP_ADDR6_ALLOWED : 0; if (asoc->peer.ipv4_address) flags |= SCTP_ADDR4_PEERSUPP; diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index c8fae1983dd..d4df45022ff 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -384,6 +384,11 @@ sctp_disposition_t sctp_sf_do_5_1B_init(const struct sctp_endpoint *ep, if (!new_asoc) goto nomem; + if (sctp_assoc_set_bind_addr_from_ep(new_asoc, + sctp_scope(sctp_source(chunk)), + GFP_ATOMIC) < 0) + goto nomem_init; + /* The call, sctp_process_init(), can fail on memory allocation. */ if (!sctp_process_init(new_asoc, chunk->chunk_hdr->type, sctp_source(chunk), @@ -401,9 +406,6 @@ sctp_disposition_t sctp_sf_do_5_1B_init(const struct sctp_endpoint *ep, len = ntohs(err_chunk->chunk_hdr->length) - sizeof(sctp_chunkhdr_t); - if (sctp_assoc_set_bind_addr_from_ep(new_asoc, GFP_ATOMIC) < 0) - goto nomem_init; - repl = sctp_make_init_ack(new_asoc, chunk, GFP_ATOMIC, len); if (!repl) goto nomem_init; @@ -1452,6 +1454,10 @@ static sctp_disposition_t sctp_sf_do_unexpected_init( if (!new_asoc) goto nomem; + if (sctp_assoc_set_bind_addr_from_ep(new_asoc, + sctp_scope(sctp_source(chunk)), GFP_ATOMIC) < 0) + goto nomem; + /* In the outbound INIT ACK the endpoint MUST copy its current * Verification Tag and Peers Verification tag into a reserved * place (local tie-tag and per tie-tag) within the state cookie. @@ -1488,9 +1494,6 @@ static sctp_disposition_t sctp_sf_do_unexpected_init( sizeof(sctp_chunkhdr_t); } - if (sctp_assoc_set_bind_addr_from_ep(new_asoc, GFP_ATOMIC) < 0) - goto nomem; - repl = sctp_make_init_ack(new_asoc, chunk, GFP_ATOMIC, len); if (!repl) goto nomem; diff --git a/net/sctp/socket.c b/net/sctp/socket.c index c8d05758661..bf705ba9723 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1080,6 +1080,13 @@ static int __sctp_connect(struct sock* sk, err = -ENOMEM; goto out_free; } + + err = sctp_assoc_set_bind_addr_from_ep(asoc, scope, + GFP_KERNEL); + if (err < 0) { + goto out_free; + } + } /* Prime the peer's transport structures. */ @@ -1095,11 +1102,6 @@ static int __sctp_connect(struct sock* sk, walk_size += af->sockaddr_len; } - err = sctp_assoc_set_bind_addr_from_ep(asoc, GFP_KERNEL); - if (err < 0) { - goto out_free; - } - /* In case the user of sctp_connectx() wants an association * id back, assign one now. */ @@ -1689,6 +1691,11 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, goto out_unlock; } asoc = new_asoc; + err = sctp_assoc_set_bind_addr_from_ep(asoc, scope, GFP_KERNEL); + if (err < 0) { + err = -ENOMEM; + goto out_free; + } /* If the SCTP_INIT ancillary data is specified, set all * the association init values accordingly. @@ -1718,11 +1725,6 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, err = -ENOMEM; goto out_free; } - err = sctp_assoc_set_bind_addr_from_ep(asoc, GFP_KERNEL); - if (err < 0) { - err = -ENOMEM; - goto out_free; - } } /* ASSERT: we have a valid association at this point. */ -- GitLab From f9c67811ebc00a42f62f5d542d3abd36bd49ae35 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 11 Nov 2009 08:19:24 +0000 Subject: [PATCH 0838/1165] sctp: Fix regression introduced by new sctp_connectx api A new (unrealeased to the user) sctp_connectx api c6ba68a26645dbc5029a9faa5687ebe6fcfc53e4 sctp: support non-blocking version of the new sctp_connectx() API introduced a regression cought by the user regression test suite. In particular, the API requires the user library to re-allocate the buffer and could potentially trigger a SIGFAULT. This change corrects that regression by passing the original address buffer to the kernel unmodified, but still allows for a returned association id. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/socket.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index bf705ba9723..3a95fcb17a9 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1276,22 +1276,30 @@ SCTP_STATIC int sctp_setsockopt_connectx(struct sock* sk, } /* - * New (hopefully final) interface for the API. The option buffer is used - * both for the returned association id and the addresses. + * New (hopefully final) interface for the API. + * We use the sctp_getaddrs_old structure so that use-space library + * can avoid any unnecessary allocations. The only defferent part + * is that we store the actual length of the address buffer into the + * addrs_num structure member. That way we can re-use the existing + * code. */ SCTP_STATIC int sctp_getsockopt_connectx3(struct sock* sk, int len, char __user *optval, int __user *optlen) { + struct sctp_getaddrs_old param; sctp_assoc_t assoc_id = 0; int err = 0; - if (len < sizeof(assoc_id)) + if (len < sizeof(param)) return -EINVAL; + if (copy_from_user(¶m, optval, sizeof(param))) + return -EFAULT; + err = __sctp_setsockopt_connectx(sk, - (struct sockaddr __user *)(optval + sizeof(assoc_id)), - len - sizeof(assoc_id), &assoc_id); + (struct sockaddr __user *)param.addrs, + param.addr_num, &assoc_id); if (err == 0 || err == -EINPROGRESS) { if (copy_to_user(optval, &assoc_id, sizeof(assoc_id))) -- GitLab From a78102e74e782914039cd8a6939532649825a2e3 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 11 Nov 2009 11:54:37 +0000 Subject: [PATCH 0839/1165] sctp: Set socket source address when additing first transport Recent commits sctp: Get rid of an extra routing lookup when adding a transport and sctp: Set source addresses on the association before adding transports changed when routes are added to the sctp transports. As such, we didn't set the socket source address correctly when adding the first transport. The first transport is always the primary/active one, so when adding it, set the socket source address. This was causing regression failures in SCTP tests. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- net/sctp/transport.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sctp/transport.c b/net/sctp/transport.c index c256e483931..3b141bb32fa 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -308,7 +308,8 @@ void sctp_transport_route(struct sctp_transport *transport, /* Initialize sk->sk_rcv_saddr, if the transport is the * association's active path for getsockname(). */ - if (asoc && (transport == asoc->peer.active_path)) + if (asoc && (!asoc->peer.primary_path || + (transport == asoc->peer.active_path))) opt->pf->af->to_sk_saddr(&transport->saddr, asoc->base.sk); } else -- GitLab From b8a623bf836ccfab09a5a6daf62116f455082e6e Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 10 Nov 2009 09:44:23 +0000 Subject: [PATCH 0840/1165] s2io: fixing a ethtool test that is broken Due commit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff, it is not more possible to pci_restore_state() more than once without calling pci_save_state() in the middle. Actually running a ethtool test on s2io makes the card inactive, and it needs to unload/reload the module to fix. This patch just save the state just after it restore in order to keep the old behaviour Signed-off-by: Breno Leitao Signed-off-by: David S. Miller --- drivers/net/s2io.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index ddccf5fa56b..0dd7839322b 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -3494,6 +3494,7 @@ static void s2io_reset(struct s2io_nic *sp) /* Restore the PCI state saved during initialization. */ pci_restore_state(sp->pdev); + pci_save_state(sp->pdev); pci_read_config_word(sp->pdev, 0x2, &val16); if (check_pci_device_id(val16) != (u16)PCI_ANY_ID) break; -- GitLab From d0490cfdf440fded2c292cfb8bb9272fc9ef6943 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 11 Nov 2009 02:03:54 +0000 Subject: [PATCH 0841/1165] ipmr: missing dev_put() on error path in vif_add() The other error paths in front of this one have a dev_put() but this one got missed. Found by smatch static checker. Signed-off-by: Dan Carpenter Acked-by: Wang Chen Signed-off-by: David S. Miller --- net/ipv4/ipmr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 630a56df7b4..99508d66a64 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -483,8 +483,10 @@ static int vif_add(struct net *net, struct vifctl *vifc, int mrtsock) return -EINVAL; } - if ((in_dev = __in_dev_get_rtnl(dev)) == NULL) + if ((in_dev = __in_dev_get_rtnl(dev)) == NULL) { + dev_put(dev); return -EADDRNOTAVAIL; + } IPV4_DEVCONF(in_dev->cnf, MC_FORWARDING)++; ip_rt_multicast_event(in_dev); -- GitLab From b93cf3f0bb45560d2ce62bdcc2181c40660cfdbf Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 12 Nov 2009 01:35:01 +0000 Subject: [PATCH 0842/1165] can: Fix driver Kconfig structure In 2.6.32-rc the new EMS USB CAN driver was contributed and added the Kconfig entry right behind an entry of the same *vendor*. This teared the SJA1000 based driver selection into pieces. This fix cleans up the 2.6.32-rc Kconfig files for the CAN drivers and moves the SJA1000 and USB Kconfig portions into the belonging directories. As there are many new CAN drivers in the queue getting this cleanup into 2.6.32-rc would massively reduce the problems for the upcoming drivers. Thanks, Oliver Signed-off-by: Oliver Hartkopp Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/Kconfig | 60 +++------------------------------ drivers/net/can/sja1000/Kconfig | 47 ++++++++++++++++++++++++++ drivers/net/can/usb/Kconfig | 10 ++++++ drivers/net/can/usb/Makefile | 2 ++ 4 files changed, 64 insertions(+), 55 deletions(-) create mode 100644 drivers/net/can/sja1000/Kconfig create mode 100644 drivers/net/can/usb/Kconfig diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index df32c109b7a..772f6d2489c 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -35,66 +35,16 @@ config CAN_CALC_BITTIMING arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" and "sjw". If unsure, say Y. -config CAN_SJA1000 - depends on CAN_DEV && HAS_IOMEM - tristate "Philips SJA1000" - ---help--- - Driver for the SJA1000 CAN controllers from Philips or NXP - -config CAN_SJA1000_ISA - depends on CAN_SJA1000 && ISA - tristate "ISA Bus based legacy SJA1000 driver" - ---help--- - This driver adds legacy support for SJA1000 chips connected to - the ISA bus using I/O port, memory mapped or indirect access. - -config CAN_SJA1000_PLATFORM - depends on CAN_SJA1000 - tristate "Generic Platform Bus based SJA1000 driver" - ---help--- - This driver adds support for the SJA1000 chips connected to - the "platform bus" (Linux abstraction for directly to the - processor attached devices). Which can be found on various - boards from Phytec (http://www.phytec.de) like the PCM027, - PCM038. - -config CAN_SJA1000_OF_PLATFORM - depends on CAN_SJA1000 && PPC_OF - tristate "Generic OF Platform Bus based SJA1000 driver" - ---help--- - This driver adds support for the SJA1000 chips connected to - the OpenFirmware "platform bus" found on embedded systems with - OpenFirmware bindings, e.g. if you have a PowerPC based system - you may want to enable this option. - -config CAN_EMS_PCI - tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the one, two or four channel CPC-PCI, - CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche - (http://www.ems-wuensche.de). - -config CAN_EMS_USB - tristate "EMS CPC-USB/ARM7 CAN/USB interface" - depends on USB && CAN_DEV - ---help--- - This driver is for the one channel CPC-USB/ARM7 CAN/USB interface - from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). - -config CAN_KVASER_PCI - tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" - depends on PCI && CAN_SJA1000 - ---help--- - This driver is for the the PCIcanx and PCIcan cards (1, 2 or - 4 channel) from Kvaser (http://www.kvaser.com). - config CAN_AT91 tristate "Atmel AT91 onchip CAN controller" - depends on CAN && CAN_DEV && ARCH_AT91SAM9263 + depends on CAN_DEV && ARCH_AT91SAM9263 ---help--- This is a driver for the SoC CAN controller in Atmel's AT91SAM9263. +source "drivers/net/can/sja1000/Kconfig" + +source "drivers/net/can/usb/Kconfig" + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig new file mode 100644 index 00000000000..4c674927f24 --- /dev/null +++ b/drivers/net/can/sja1000/Kconfig @@ -0,0 +1,47 @@ +menuconfig CAN_SJA1000 + tristate "Philips/NXP SJA1000 devices" + depends on CAN_DEV && HAS_IOMEM + +if CAN_SJA1000 + +config CAN_SJA1000_ISA + tristate "ISA Bus based legacy SJA1000 driver" + depends on ISA + ---help--- + This driver adds legacy support for SJA1000 chips connected to + the ISA bus using I/O port, memory mapped or indirect access. + +config CAN_SJA1000_PLATFORM + tristate "Generic Platform Bus based SJA1000 driver" + ---help--- + This driver adds support for the SJA1000 chips connected to + the "platform bus" (Linux abstraction for directly to the + processor attached devices). Which can be found on various + boards from Phytec (http://www.phytec.de) like the PCM027, + PCM038. + +config CAN_SJA1000_OF_PLATFORM + tristate "Generic OF Platform Bus based SJA1000 driver" + depends on PPC_OF + ---help--- + This driver adds support for the SJA1000 chips connected to + the OpenFirmware "platform bus" found on embedded systems with + OpenFirmware bindings, e.g. if you have a PowerPC based system + you may want to enable this option. + +config CAN_EMS_PCI + tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card" + depends on PCI + ---help--- + This driver is for the one, two or four channel CPC-PCI, + CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche + (http://www.ems-wuensche.de). + +config CAN_KVASER_PCI + tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards" + depends on PCI + ---help--- + This driver is for the the PCIcanx and PCIcan cards (1, 2 or + 4 channel) from Kvaser (http://www.kvaser.com). + +endif diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig new file mode 100644 index 00000000000..bbc78e0b8a1 --- /dev/null +++ b/drivers/net/can/usb/Kconfig @@ -0,0 +1,10 @@ +menu "CAN USB interfaces" + depends on USB && CAN_DEV + +config CAN_EMS_USB + tristate "EMS CPC-USB/ARM7 CAN/USB interface" + ---help--- + This driver is for the one channel CPC-USB/ARM7 CAN/USB interface + from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). + +endmenu diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile index c3f75ba701b..0afd51d4c7a 100644 --- a/drivers/net/can/usb/Makefile +++ b/drivers/net/can/usb/Makefile @@ -3,3 +3,5 @@ # obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o + +ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG -- GitLab From 55369c0a6441e95062cfaeef6eefcfb357a31e8c Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Thu, 12 Nov 2009 05:34:05 +0000 Subject: [PATCH 0843/1165] can: add the missing netlink get_xstats_size callback This patch adds the missing "get_xstats_size" callback for the netlink interface, which is required if "fill_xstats" is used, as pointed out by Patrick McHardy. Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 564e31c9fee..2868fe842a4 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -629,6 +629,11 @@ nla_put_failure: return -EMSGSIZE; } +static size_t can_get_xstats_size(const struct net_device *dev) +{ + return sizeof(struct can_device_stats); +} + static int can_fill_xstats(struct sk_buff *skb, const struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); @@ -657,6 +662,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .changelink = can_changelink, .get_size = can_get_size, .fill_info = can_fill_info, + .get_xstats_size = can_get_xstats_size, .fill_xstats = can_fill_xstats, }; -- GitLab From 8812304cf1110ae16b0778680f6022216cf4716a Mon Sep 17 00:00:00 2001 From: Raimonds Cicans Date: Fri, 13 Nov 2009 10:52:19 +0000 Subject: [PATCH 0844/1165] r8169: Fix receive buffer length when MTU is between 1515 and 1536 In r8169 driver MTU is used to calculate receive buffer size. Receive buffer size is used to configure hardware incoming packet filter. For jumbo frames: Receive buffer size = Max frame size = MTU + 14 (ethernet header) + 4 (vlan header) + 4 (ethernet checksum) = MTU + 22 Bug: driver for all MTU up to 1536 use receive buffer size 1536 As you can see from formula, this mean all IP packets > 1536 - 22 (for vlan tagged, 1536 - 18 for not tagged) are dropped by hardware filter. Example: host_good> ifconfig eth0 mtu 1536 host_r8169> ifconfig eth0 mtu 1536 host_good> ping host_r8169 Ok host_good> ping -s 1500 host_r8169 Fail host_good> ifconfig eth0 mtu 7000 host_r8169> ifconfig eth0 mtu 7000 host_good> ping -s 1500 host_r8169 Ok Bonus: got rid of magic number 8 Signed-off-by: Raimonds Cicans Signed-off-by: David S. Miller --- drivers/net/r8169.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index fa493567848..b9221bdc718 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3243,9 +3243,9 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev) static void rtl8169_set_rxbufsize(struct rtl8169_private *tp, struct net_device *dev) { - unsigned int mtu = dev->mtu; + unsigned int max_frame = dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; - tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE; + tp->rx_buf_sz = (max_frame > RX_BUF_SIZE) ? max_frame : RX_BUF_SIZE; } static int rtl8169_open(struct net_device *dev) -- GitLab From 5e08fe570c2dbabb5015c37049eb9a451e55c890 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sat, 14 Nov 2009 14:37:19 +0100 Subject: [PATCH 0845/1165] ALSA: ice1724 - Fix section mismatch in prodigy_hd2_resume() Remove invlid __devinit prefix from the suspend callback. Signed-off-by: Takashi Iwai --- sound/pci/ice1712/prodigy_hifi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/ice1712/prodigy_hifi.c b/sound/pci/ice1712/prodigy_hifi.c index c75515f5be6..6a9fee3ee78 100644 --- a/sound/pci/ice1712/prodigy_hifi.c +++ b/sound/pci/ice1712/prodigy_hifi.c @@ -1100,7 +1100,7 @@ static void ak4396_init(struct snd_ice1712 *ice) } #ifdef CONFIG_PM -static int __devinit prodigy_hd2_resume(struct snd_ice1712 *ice) +static int prodigy_hd2_resume(struct snd_ice1712 *ice) { /* initialize ak4396 codec and restore previous mixer volumes */ struct prodigy_hifi_spec *spec = ice->spec; -- GitLab From 479c2553af9a176a0613894b9f1ec73425fd56a3 Mon Sep 17 00:00:00 2001 From: Petr Vandrovec Date: Sat, 14 Nov 2009 10:47:07 +0100 Subject: [PATCH 0846/1165] Fix memory corruption caused by nfsd readdir+ Commit 8177e6d6dfb9cd03d9bdeb647c32161f8f58f686 ("nfsd: clean up readdirplus encoding") introduced single character typo in nfs3 readdir+ implementation. Unfortunately that typo has quite bad side effects: random memory corruption, followed (on my box) with immediate spontaneous box reboot. Using 'p1' instead of 'p' fixes my Linux box rebooting whenever VMware ESXi box tries to list contents of my home directory. Signed-off-by: Petr Vandrovec Cc: "J. Bruce Fields" Cc: Neil Brown Signed-off-by: Linus Torvalds --- fs/nfsd/nfs3xdr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c index edf926e1062..d0a2ce1b432 100644 --- a/fs/nfsd/nfs3xdr.c +++ b/fs/nfsd/nfs3xdr.c @@ -958,7 +958,7 @@ encode_entry(struct readdir_cd *ccd, const char *name, int namlen, p1 = encode_entry_baggage(cd, p1, name, namlen, ino); if (plus) - p = encode_entryplus_baggage(cd, p1, name, namlen); + p1 = encode_entryplus_baggage(cd, p1, name, namlen); /* determine entry word length and lengths to go in pages */ num_entry_words = p1 - tmp; -- GitLab From 7b8e2c1db0f358bc389dd1ee4633a92d80a5a6d0 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 13 Nov 2009 14:26:23 +0100 Subject: [PATCH 0847/1165] fix memory leak in fixed btusb_close If the waker is killed before it can replay outstanding URBs, these URBs won't be freed or will be replayed at the next open. This patch closes the window by explicitely discarding outstanding URBs. Signed-off-by: Oliver Neukum Acked-by: Marcel Holtmann Signed-off-by: Linus Torvalds --- drivers/bluetooth/btusb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 2fb38027f3b..44bc8bbabf5 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -600,11 +600,13 @@ static int btusb_close(struct hci_dev *hdev) btusb_stop_traffic(data); err = usb_autopm_get_interface(data->intf); if (err < 0) - return 0; + goto failed; data->intf->needs_remote_wakeup = 0; usb_autopm_put_interface(data->intf); +failed: + usb_scuttle_anchored_urbs(&data->deferred); return 0; } -- GitLab From 1a7af63108f07637504300671a72432c34e10021 Mon Sep 17 00:00:00 2001 From: Jiro SEKIBA Date: Sun, 15 Nov 2009 13:49:44 +0900 Subject: [PATCH 0848/1165] nilfs2: deleted struct nilfs_dat_group_desc struct nilfs_dat_group_desc is not used both in kernel and user spaces. struct nilfs_palloc_group_desc is used instead. Signed-off-by: Jiro SEKIBA Signed-off-by: Ryusuke Konishi --- include/linux/nilfs2_fs.h | 9 --------- 1 file changed, 9 deletions(-) diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index 79fec6af3f9..ce520402e84 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -424,15 +424,6 @@ struct nilfs_dat_entry { __le64 de_rsv; }; -/** - * struct nilfs_dat_group_desc - block group descriptor - * @dg_nfrees: number of free virtual block numbers in block group - */ -struct nilfs_dat_group_desc { - __le32 dg_nfrees; -}; - - /** * struct nilfs_snapshot_list - snapshot list * @ssl_next: next checkpoint number on snapshot list -- GitLab From 18dafac1a4c6c88867a50f9a82492976f20383d6 Mon Sep 17 00:00:00 2001 From: Jiro SEKIBA Date: Sun, 15 Nov 2009 13:49:45 +0900 Subject: [PATCH 0849/1165] nilfs2: deleted inconsistent comment in nilfs_load_inode_block() The comment says, "Caller of this function MUST lock s_inode_lock", however just above the comment, it locks s_inode_lock in the function. Signed-off-by: Jiro SEKIBA Signed-off-by: Ryusuke Konishi --- fs/nilfs2/inode.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c index 5040220c373..2a0a5a3ac13 100644 --- a/fs/nilfs2/inode.c +++ b/fs/nilfs2/inode.c @@ -664,7 +664,6 @@ int nilfs_load_inode_block(struct nilfs_sb_info *sbi, struct inode *inode, int err; spin_lock(&sbi->s_inode_lock); - /* Caller of this function MUST lock s_inode_lock */ if (ii->i_bh == NULL) { spin_unlock(&sbi->s_inode_lock); err = nilfs_ifile_get_inode_block(sbi->s_ifile, inode->i_ino, -- GitLab From 8ef5837a47f73faee18fa7ce2f9a9eb7675be8de Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Sat, 14 Nov 2009 18:20:04 +0000 Subject: [PATCH 0850/1165] ALSA: hda - Dell Studio 1557 hd-audio quirk Add the Dell Studio 15 (model 1557, Core i7) laptop to the hd-audio quirk list, enabling audio. Signed-off-by: Daniel J Blueman Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 8eb6508cd99..86de305fc9f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1590,6 +1590,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "Dell Studio 17", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be, "Dell Studio 1555", STAC_DELL_M6_DMIC), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02bd, + "Dell Studio 1557", STAC_DELL_M6_DMIC), {} /* terminator */ }; -- GitLab From 65166571800af0f63f21e5576d7db12d2bf73790 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Thu, 15 Oct 2009 12:13:36 -0700 Subject: [PATCH 0851/1165] kconfig: Mark various internal functions static kconfig's keyword hash, lexer, and parser define various functions used only locally. Declare these functions as static, and regenerate the corresponding generated files. Signed-off-by: Josh Triplett --- scripts/kconfig/lex.zconf.c_shipped | 25 +++++++++++++++++++------ scripts/kconfig/zconf.gperf | 2 ++ scripts/kconfig/zconf.hash.c_shipped | 2 ++ scripts/kconfig/zconf.l | 6 +++--- scripts/kconfig/zconf.tab.c_shipped | 6 +++--- scripts/kconfig/zconf.y | 6 +++--- 6 files changed, 32 insertions(+), 15 deletions(-) diff --git a/scripts/kconfig/lex.zconf.c_shipped b/scripts/kconfig/lex.zconf.c_shipped index dc3e81807d1..fdc7113b08d 100644 --- a/scripts/kconfig/lex.zconf.c_shipped +++ b/scripts/kconfig/lex.zconf.c_shipped @@ -160,7 +160,15 @@ typedef unsigned int flex_uint32_t; /* Size of default input buffer. */ #ifndef YY_BUF_SIZE +#ifdef __ia64__ +/* On IA-64, the buffer size is 16k, not 8k. + * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. + * Ditto for the __ia64__ case accordingly. + */ +#define YY_BUF_SIZE 32768 +#else #define YY_BUF_SIZE 16384 +#endif /* __ia64__ */ #endif /* The state buf must be large enough to hold one state per character in the main buffer. @@ -802,7 +810,7 @@ static int last_ts, first_ts; static void zconf_endhelp(void); static void zconf_endfile(void); -void new_string(void) +static void new_string(void) { text = malloc(START_STRSIZE); text_asize = START_STRSIZE; @@ -810,7 +818,7 @@ void new_string(void) *text = 0; } -void append_string(const char *str, int size) +static void append_string(const char *str, int size) { int new_size = text_size + size + 1; if (new_size > text_asize) { @@ -824,7 +832,7 @@ void append_string(const char *str, int size) text[text_size] = 0; } -void alloc_string(const char *str, int size) +static void alloc_string(const char *str, int size) { text = malloc(size + 1); memcpy(text, str, size); @@ -914,7 +922,12 @@ static int input (void ); /* Amount of stuff to slurp up with each read. */ #ifndef YY_READ_BUF_SIZE +#ifdef __ia64__ +/* On IA-64, the buffer size is 16k, not 8k */ +#define YY_READ_BUF_SIZE 16384 +#else #define YY_READ_BUF_SIZE 8192 +#endif /* __ia64__ */ #endif /* Copy whatever the last rule matched to the standard output. */ @@ -922,7 +935,7 @@ static int input (void ); /* This used to be an fputs(), but since the string might contain NUL's, * we now use fwrite(). */ -#define ECHO fwrite( zconftext, zconfleng, 1, zconfout ) +#define ECHO do { if (fwrite( zconftext, zconfleng, 1, zconfout )) {} } while (0) #endif /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, @@ -2060,8 +2073,8 @@ YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr ) /** Setup the input buffer state to scan the given bytes. The next call to zconflex() will * scan from a @e copy of @a bytes. - * @param bytes the byte buffer to scan - * @param len the number of bytes in the buffer pointed to by @a bytes. + * @param yybytes the byte buffer to scan + * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. * * @return the newly allocated buffer state object. */ diff --git a/scripts/kconfig/zconf.gperf b/scripts/kconfig/zconf.gperf index 25ef5d01c0a..d8bc7424962 100644 --- a/scripts/kconfig/zconf.gperf +++ b/scripts/kconfig/zconf.gperf @@ -9,6 +9,8 @@ struct kconf_id; +static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len); + %% mainmenu, T_MAINMENU, TF_COMMAND menu, T_MENU, TF_COMMAND diff --git a/scripts/kconfig/zconf.hash.c_shipped b/scripts/kconfig/zconf.hash.c_shipped index 5c73d51339d..c1748faf463 100644 --- a/scripts/kconfig/zconf.hash.c_shipped +++ b/scripts/kconfig/zconf.hash.c_shipped @@ -30,6 +30,8 @@ #endif struct kconf_id; + +static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len); /* maximum key range = 47, duplicates = 0 */ #ifdef __GNUC__ diff --git a/scripts/kconfig/zconf.l b/scripts/kconfig/zconf.l index 21ff69c9ad4..d8f7236cb0a 100644 --- a/scripts/kconfig/zconf.l +++ b/scripts/kconfig/zconf.l @@ -39,7 +39,7 @@ static int last_ts, first_ts; static void zconf_endhelp(void); static void zconf_endfile(void); -void new_string(void) +static void new_string(void) { text = malloc(START_STRSIZE); text_asize = START_STRSIZE; @@ -47,7 +47,7 @@ void new_string(void) *text = 0; } -void append_string(const char *str, int size) +static void append_string(const char *str, int size) { int new_size = text_size + size + 1; if (new_size > text_asize) { @@ -61,7 +61,7 @@ void append_string(const char *str, int size) text[text_size] = 0; } -void alloc_string(const char *str, int size) +static void alloc_string(const char *str, int size) { text = malloc(size + 1); memcpy(text, str, size); diff --git a/scripts/kconfig/zconf.tab.c_shipped b/scripts/kconfig/zconf.tab.c_shipped index c42b439c5cc..6e9dcd59aa8 100644 --- a/scripts/kconfig/zconf.tab.c_shipped +++ b/scripts/kconfig/zconf.tab.c_shipped @@ -2249,7 +2249,7 @@ void conf_parse(const char *name) sym_set_change_count(1); } -const char *zconf_tokenname(int token) +static const char *zconf_tokenname(int token) { switch (token) { case T_MENU: return "menu"; @@ -2313,7 +2313,7 @@ static void zconferror(const char *err) #endif } -void print_quoted_string(FILE *out, const char *str) +static void print_quoted_string(FILE *out, const char *str) { const char *p; int len; @@ -2330,7 +2330,7 @@ void print_quoted_string(FILE *out, const char *str) putc('"', out); } -void print_symbol(FILE *out, struct menu *menu) +static void print_symbol(FILE *out, struct menu *menu) { struct symbol *sym = menu->sym; struct property *prop; diff --git a/scripts/kconfig/zconf.y b/scripts/kconfig/zconf.y index 01ec550ec01..8c43491f8cc 100644 --- a/scripts/kconfig/zconf.y +++ b/scripts/kconfig/zconf.y @@ -504,7 +504,7 @@ void conf_parse(const char *name) sym_set_change_count(1); } -const char *zconf_tokenname(int token) +static const char *zconf_tokenname(int token) { switch (token) { case T_MENU: return "menu"; @@ -568,7 +568,7 @@ static void zconferror(const char *err) #endif } -void print_quoted_string(FILE *out, const char *str) +static void print_quoted_string(FILE *out, const char *str) { const char *p; int len; @@ -585,7 +585,7 @@ void print_quoted_string(FILE *out, const char *str) putc('"', out); } -void print_symbol(FILE *out, struct menu *menu) +static void print_symbol(FILE *out, struct menu *menu) { struct symbol *sym = menu->sym; struct property *prop; -- GitLab From ed9df091491dd41d4e054071948c8e2e5b354c99 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Thu, 15 Oct 2009 12:58:40 -0700 Subject: [PATCH 0852/1165] genksyms: Mark is_reserved_word static The genksyms keyword gperf hash provides a function is_reserved_word. genksyms #includes the resulting generated file keywords.c, so the function gets used only in the same source file that defines it. Mark is_reserved_word static, and regenerate the corresponding generated file. Signed-off-by: Josh Triplett --- scripts/genksyms/keywords.c_shipped | 95 +++++++++++++++-------------- scripts/genksyms/keywords.gperf | 2 + 2 files changed, 52 insertions(+), 45 deletions(-) diff --git a/scripts/genksyms/keywords.c_shipped b/scripts/genksyms/keywords.c_shipped index 971e0113ae7..287467a2e8c 100644 --- a/scripts/genksyms/keywords.c_shipped +++ b/scripts/genksyms/keywords.c_shipped @@ -1,4 +1,4 @@ -/* ANSI-C code produced by gperf version 3.0.2 */ +/* ANSI-C code produced by gperf version 3.0.3 */ /* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf */ #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \ @@ -30,7 +30,9 @@ #line 1 "scripts/genksyms/keywords.gperf" -#line 3 "scripts/genksyms/keywords.gperf" +struct resword; +static const struct resword *is_reserved_word(register const char *str, register unsigned int len); +#line 5 "scripts/genksyms/keywords.gperf" struct resword { const char *name; int token; }; /* maximum key range = 62, duplicates = 0 */ @@ -78,6 +80,9 @@ is_reserved_hash (register const char *str, register unsigned int len) #ifdef __GNUC__ __inline +#ifdef __GNUC_STDC_INLINE__ +__attribute__ ((__gnu_inline__)) +#endif #endif const struct resword * is_reserved_word (register const char *str, register unsigned int len) @@ -94,105 +99,105 @@ is_reserved_word (register const char *str, register unsigned int len) static const struct resword wordlist[] = { {""}, {""}, {""}, -#line 26 "scripts/genksyms/keywords.gperf" +#line 28 "scripts/genksyms/keywords.gperf" {"asm", ASM_KEYW}, {""}, -#line 8 "scripts/genksyms/keywords.gperf" +#line 10 "scripts/genksyms/keywords.gperf" {"__asm", ASM_KEYW}, {""}, -#line 9 "scripts/genksyms/keywords.gperf" +#line 11 "scripts/genksyms/keywords.gperf" {"__asm__", ASM_KEYW}, {""}, {""}, -#line 52 "scripts/genksyms/keywords.gperf" +#line 54 "scripts/genksyms/keywords.gperf" {"__typeof__", TYPEOF_KEYW}, {""}, -#line 12 "scripts/genksyms/keywords.gperf" +#line 14 "scripts/genksyms/keywords.gperf" {"__const", CONST_KEYW}, -#line 11 "scripts/genksyms/keywords.gperf" - {"__attribute__", ATTRIBUTE_KEYW}, #line 13 "scripts/genksyms/keywords.gperf" + {"__attribute__", ATTRIBUTE_KEYW}, +#line 15 "scripts/genksyms/keywords.gperf" {"__const__", CONST_KEYW}, -#line 18 "scripts/genksyms/keywords.gperf" +#line 20 "scripts/genksyms/keywords.gperf" {"__signed__", SIGNED_KEYW}, -#line 44 "scripts/genksyms/keywords.gperf" +#line 46 "scripts/genksyms/keywords.gperf" {"static", STATIC_KEYW}, -#line 20 "scripts/genksyms/keywords.gperf" +#line 22 "scripts/genksyms/keywords.gperf" {"__volatile__", VOLATILE_KEYW}, -#line 39 "scripts/genksyms/keywords.gperf" +#line 41 "scripts/genksyms/keywords.gperf" {"int", INT_KEYW}, -#line 32 "scripts/genksyms/keywords.gperf" +#line 34 "scripts/genksyms/keywords.gperf" {"char", CHAR_KEYW}, -#line 33 "scripts/genksyms/keywords.gperf" +#line 35 "scripts/genksyms/keywords.gperf" {"const", CONST_KEYW}, -#line 45 "scripts/genksyms/keywords.gperf" +#line 47 "scripts/genksyms/keywords.gperf" {"struct", STRUCT_KEYW}, -#line 24 "scripts/genksyms/keywords.gperf" +#line 26 "scripts/genksyms/keywords.gperf" {"__restrict__", RESTRICT_KEYW}, -#line 25 "scripts/genksyms/keywords.gperf" +#line 27 "scripts/genksyms/keywords.gperf" {"restrict", RESTRICT_KEYW}, -#line 23 "scripts/genksyms/keywords.gperf" +#line 25 "scripts/genksyms/keywords.gperf" {"_restrict", RESTRICT_KEYW}, -#line 16 "scripts/genksyms/keywords.gperf" +#line 18 "scripts/genksyms/keywords.gperf" {"__inline__", INLINE_KEYW}, -#line 10 "scripts/genksyms/keywords.gperf" +#line 12 "scripts/genksyms/keywords.gperf" {"__attribute", ATTRIBUTE_KEYW}, {""}, -#line 14 "scripts/genksyms/keywords.gperf" +#line 16 "scripts/genksyms/keywords.gperf" {"__extension__", EXTENSION_KEYW}, -#line 35 "scripts/genksyms/keywords.gperf" +#line 37 "scripts/genksyms/keywords.gperf" {"enum", ENUM_KEYW}, -#line 19 "scripts/genksyms/keywords.gperf" +#line 21 "scripts/genksyms/keywords.gperf" {"__volatile", VOLATILE_KEYW}, -#line 36 "scripts/genksyms/keywords.gperf" +#line 38 "scripts/genksyms/keywords.gperf" {"extern", EXTERN_KEYW}, {""}, -#line 17 "scripts/genksyms/keywords.gperf" +#line 19 "scripts/genksyms/keywords.gperf" {"__signed", SIGNED_KEYW}, -#line 7 "scripts/genksyms/keywords.gperf" +#line 9 "scripts/genksyms/keywords.gperf" {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW}, {""}, -#line 51 "scripts/genksyms/keywords.gperf" +#line 53 "scripts/genksyms/keywords.gperf" {"typeof", TYPEOF_KEYW}, -#line 46 "scripts/genksyms/keywords.gperf" +#line 48 "scripts/genksyms/keywords.gperf" {"typedef", TYPEDEF_KEYW}, -#line 15 "scripts/genksyms/keywords.gperf" +#line 17 "scripts/genksyms/keywords.gperf" {"__inline", INLINE_KEYW}, -#line 31 "scripts/genksyms/keywords.gperf" +#line 33 "scripts/genksyms/keywords.gperf" {"auto", AUTO_KEYW}, -#line 47 "scripts/genksyms/keywords.gperf" +#line 49 "scripts/genksyms/keywords.gperf" {"union", UNION_KEYW}, {""}, {""}, -#line 48 "scripts/genksyms/keywords.gperf" +#line 50 "scripts/genksyms/keywords.gperf" {"unsigned", UNSIGNED_KEYW}, -#line 49 "scripts/genksyms/keywords.gperf" +#line 51 "scripts/genksyms/keywords.gperf" {"void", VOID_KEYW}, -#line 42 "scripts/genksyms/keywords.gperf" +#line 44 "scripts/genksyms/keywords.gperf" {"short", SHORT_KEYW}, {""}, {""}, -#line 50 "scripts/genksyms/keywords.gperf" +#line 52 "scripts/genksyms/keywords.gperf" {"volatile", VOLATILE_KEYW}, {""}, -#line 37 "scripts/genksyms/keywords.gperf" +#line 39 "scripts/genksyms/keywords.gperf" {"float", FLOAT_KEYW}, -#line 34 "scripts/genksyms/keywords.gperf" +#line 36 "scripts/genksyms/keywords.gperf" {"double", DOUBLE_KEYW}, {""}, -#line 5 "scripts/genksyms/keywords.gperf" +#line 7 "scripts/genksyms/keywords.gperf" {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW}, {""}, {""}, -#line 38 "scripts/genksyms/keywords.gperf" +#line 40 "scripts/genksyms/keywords.gperf" {"inline", INLINE_KEYW}, -#line 6 "scripts/genksyms/keywords.gperf" +#line 8 "scripts/genksyms/keywords.gperf" {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, -#line 41 "scripts/genksyms/keywords.gperf" +#line 43 "scripts/genksyms/keywords.gperf" {"register", REGISTER_KEYW}, {""}, -#line 22 "scripts/genksyms/keywords.gperf" +#line 24 "scripts/genksyms/keywords.gperf" {"_Bool", BOOL_KEYW}, -#line 43 "scripts/genksyms/keywords.gperf" +#line 45 "scripts/genksyms/keywords.gperf" {"signed", SIGNED_KEYW}, {""}, {""}, -#line 40 "scripts/genksyms/keywords.gperf" +#line 42 "scripts/genksyms/keywords.gperf" {"long", LONG_KEYW} }; diff --git a/scripts/genksyms/keywords.gperf b/scripts/genksyms/keywords.gperf index 5ef3733225f..8fe977a4d57 100644 --- a/scripts/genksyms/keywords.gperf +++ b/scripts/genksyms/keywords.gperf @@ -1,4 +1,6 @@ %{ +struct resword; +static const struct resword *is_reserved_word(register const char *str, register unsigned int len); %} struct resword { const char *name; int token; } %% -- GitLab From 1b98c00bf3a8a417be6412d8a3ed867a72b18f68 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 14:06:13 -0700 Subject: [PATCH 0853/1165] Documentation/vm/page-types.c: Declare checked_open static Nothing outside of Documentation/vm/page-types.c references checked_open. Signed-off-by: Josh Triplett --- Documentation/vm/page-types.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c index 3ec4f2a2258..4793c6aac73 100644 --- a/Documentation/vm/page-types.c +++ b/Documentation/vm/page-types.c @@ -218,7 +218,7 @@ static void fatal(const char *x, ...) exit(EXIT_FAILURE); } -int checked_open(const char *pathname, int flags) +static int checked_open(const char *pathname, int flags) { int fd = open(pathname, flags); -- GitLab From ad0cd62ab632afe9b562b5f09343c21e1521505d Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 14:46:56 -0700 Subject: [PATCH 0854/1165] arch/alpha/boot/tools/objstrip.c: Mark "usage" static Nothing outside of arch/alpha/boot/tools/objstrip.c references the usage function. Signed-off-by: Josh Triplett --- arch/alpha/boot/tools/objstrip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/alpha/boot/tools/objstrip.c b/arch/alpha/boot/tools/objstrip.c index 9d0727d18ae..367d53d031f 100644 --- a/arch/alpha/boot/tools/objstrip.c +++ b/arch/alpha/boot/tools/objstrip.c @@ -35,7 +35,7 @@ const char * prog_name; -void +static void usage (void) { fprintf(stderr, -- GitLab From 95981e7de53a7c67dc32d7440c160947c134d8eb Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 14:52:05 -0700 Subject: [PATCH 0855/1165] arch/powerpc/boot/addRamDisk.c: Mark several internal functions static Nothing outside of arch/powerpc/boot/addRamDisk.c references the functions "get4k", "put4k", or "death". Signed-off-by: Josh Triplett --- arch/powerpc/boot/addRamDisk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/boot/addRamDisk.c b/arch/powerpc/boot/addRamDisk.c index c02a99952be..893f446cbd2 100644 --- a/arch/powerpc/boot/addRamDisk.c +++ b/arch/powerpc/boot/addRamDisk.c @@ -58,7 +58,7 @@ static int check_elf64(void *p, int size, struct addr_range *r) return 64; } -void get4k(FILE *file, char *buf ) +static void get4k(FILE *file, char *buf ) { unsigned j; unsigned num = fread(buf, 1, 4096, file); @@ -66,12 +66,12 @@ void get4k(FILE *file, char *buf ) buf[j] = 0; } -void put4k(FILE *file, char *buf ) +static void put4k(FILE *file, char *buf ) { fwrite(buf, 1, 4096, file); } -void death(const char *msg, FILE *fdesc, const char *fname) +static void death(const char *msg, FILE *fdesc, const char *fname) { fprintf(stderr, msg); fclose(fdesc); -- GitLab From c843e315469a1519b83835628ca8906daf9a2c0a Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 14:58:29 -0700 Subject: [PATCH 0856/1165] arch/sparc/boot/*.c: Mark various internal functions static Signed-off-by: Josh Triplett --- arch/sparc/boot/btfixupprep.c | 8 ++++---- arch/sparc/boot/piggyback_32.c | 10 +++++----- arch/sparc/boot/piggyback_64.c | 2 +- 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c index 52a4208fe4f..bbf91b9c3d3 100644 --- a/arch/sparc/boot/btfixupprep.c +++ b/arch/sparc/boot/btfixupprep.c @@ -61,14 +61,14 @@ unsigned long lastfoffset = -1; unsigned long lastfrelno; btfixup *lastf; -void fatal(void) __attribute__((noreturn)); -void fatal(void) +static void fatal(void) __attribute__((noreturn)); +static void fatal(void) { fprintf(stderr, "Malformed output from objdump\n%s\n", buffer); exit(1); } -btfixup *find(int type, char *name) +static btfixup *find(int type, char *name) { int i; for (i = 0; i < last; i++) { @@ -88,7 +88,7 @@ btfixup *find(int type, char *name) return array + last - 1; } -void set_mode (char *buffer) +static void set_mode (char *buffer) { for (mode = 0;; mode++) if (buffer[mode] < '0' || buffer[mode] > '9') diff --git a/arch/sparc/boot/piggyback_32.c b/arch/sparc/boot/piggyback_32.c index e8dc9adfcd6..ac944aec730 100644 --- a/arch/sparc/boot/piggyback_32.c +++ b/arch/sparc/boot/piggyback_32.c @@ -35,17 +35,17 @@ * as PROM looks for a.out image only. */ -unsigned short ld2(char *p) +static unsigned short ld2(char *p) { return (p[0] << 8) | p[1]; } -unsigned int ld4(char *p) +static unsigned int ld4(char *p) { return (p[0] << 24) | (p[1] << 16) | (p[2] << 8) | p[3]; } -void st4(char *p, unsigned int x) +static void st4(char *p, unsigned int x) { p[0] = x >> 24; p[1] = x >> 16; @@ -53,7 +53,7 @@ void st4(char *p, unsigned int x) p[3] = x; } -void usage(void) +static void usage(void) { /* fs_img.gz is an image of initial ramdisk. */ fprintf(stderr, "Usage: piggyback vmlinux.aout System.map fs_img.gz\n"); @@ -61,7 +61,7 @@ void usage(void) exit(1); } -void die(char *str) +static void die(char *str) { perror (str); exit(1); diff --git a/arch/sparc/boot/piggyback_64.c b/arch/sparc/boot/piggyback_64.c index c63fd1b6bdd..a26a686cb5a 100644 --- a/arch/sparc/boot/piggyback_64.c +++ b/arch/sparc/boot/piggyback_64.c @@ -32,7 +32,7 @@ /* Note: run this on an a.out kernel (use elftoaout for it), as PROM looks for a.out image onlly usage: piggyback vmlinux System.map tail, where tail is gzipped fs of the initial ramdisk */ -void die(char *str) +static void die(char *str) { perror (str); exit(1); -- GitLab From 0592e4c49e5af8ef71a1aa9308a100d711c64911 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 15:12:13 -0700 Subject: [PATCH 0857/1165] drm: radeon: Mark several functions static in mkregtable Signed-off-by: Josh Triplett --- drivers/gpu/drm/radeon/mkregtable.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/radeon/mkregtable.c b/drivers/gpu/drm/radeon/mkregtable.c index fb211e585de..0d79577c157 100644 --- a/drivers/gpu/drm/radeon/mkregtable.c +++ b/drivers/gpu/drm/radeon/mkregtable.c @@ -561,7 +561,7 @@ struct table { char *gpu_prefix; }; -struct offset *offset_new(unsigned o) +static struct offset *offset_new(unsigned o) { struct offset *offset; @@ -573,12 +573,12 @@ struct offset *offset_new(unsigned o) return offset; } -void table_offset_add(struct table *t, struct offset *offset) +static void table_offset_add(struct table *t, struct offset *offset) { list_add_tail(&offset->list, &t->offsets); } -void table_init(struct table *t) +static void table_init(struct table *t) { INIT_LIST_HEAD(&t->offsets); t->offset_max = 0; @@ -586,7 +586,7 @@ void table_init(struct table *t) t->table = NULL; } -void table_print(struct table *t) +static void table_print(struct table *t) { unsigned nlloop, i, j, n, c, id; @@ -611,7 +611,7 @@ void table_print(struct table *t) printf("};\n"); } -int table_build(struct table *t) +static int table_build(struct table *t) { struct offset *offset; unsigned i, m; @@ -631,7 +631,7 @@ int table_build(struct table *t) } static char gpu_name[10]; -int parser_auth(struct table *t, const char *filename) +static int parser_auth(struct table *t, const char *filename) { FILE *file; regex_t mask_rex; -- GitLab From 23c4ace526fe9c5f9a4b1b0759cb76a285052ba0 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 15:52:06 -0700 Subject: [PATCH 0858/1165] dtc: Set "noinput" in the lexer to avoid an unused function Regenerate the corresponding generated lexer. Regenerating the lexer with current flex also provides prototypes for various yy* functions, making some -Wmissing-prototypes warnings go away as well. Signed-off-by: Josh Triplett --- scripts/dtc/dtc-lexer.l | 2 +- scripts/dtc/dtc-lexer.lex.c_shipped | 69 ++++++++++++++++++++++------- 2 files changed, 54 insertions(+), 17 deletions(-) diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l index 44dbfd3f097..a627bbee91d 100644 --- a/scripts/dtc/dtc-lexer.l +++ b/scripts/dtc/dtc-lexer.l @@ -18,7 +18,7 @@ * USA */ -%option noyywrap nounput yylineno +%option noyywrap noinput nounput yylineno %x INCLUDE %x BYTESTRING diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped index ac392cb040f..e27cc636e32 100644 --- a/scripts/dtc/dtc-lexer.lex.c_shipped +++ b/scripts/dtc/dtc-lexer.lex.c_shipped @@ -9,7 +9,7 @@ #define FLEX_SCANNER #define YY_FLEX_MAJOR_VERSION 2 #define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 34 +#define YY_FLEX_SUBMINOR_VERSION 35 #if YY_FLEX_SUBMINOR_VERSION > 0 #define FLEX_BETA #endif @@ -54,7 +54,6 @@ typedef int flex_int32_t; typedef unsigned char flex_uint8_t; typedef unsigned short int flex_uint16_t; typedef unsigned int flex_uint32_t; -#endif /* ! C99 */ /* Limits of integral types. */ #ifndef INT8_MIN @@ -85,6 +84,8 @@ typedef unsigned int flex_uint32_t; #define UINT32_MAX (4294967295U) #endif +#endif /* ! C99 */ + #endif /* ! FLEXINT_H */ #ifdef __cplusplus @@ -141,7 +142,15 @@ typedef unsigned int flex_uint32_t; /* Size of default input buffer. */ #ifndef YY_BUF_SIZE +#ifdef __ia64__ +/* On IA-64, the buffer size is 16k, not 8k. + * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. + * Ditto for the __ia64__ case accordingly. + */ +#define YY_BUF_SIZE 32768 +#else #define YY_BUF_SIZE 16384 +#endif /* __ia64__ */ #endif /* The state buf must be large enough to hold one state per character in the main buffer. @@ -192,13 +201,6 @@ extern FILE *yyin, *yyout; #define unput(c) yyunput( c, (yytext_ptr) ) -/* The following is because we cannot portably get our hands on size_t - * (without autoconf's help, which isn't available because we want - * flex-generated scanners to compile on their own). - * Given that the standard has decreed that size_t exists since 1989, - * I guess we can afford to depend on it. Manoj. - */ - #ifndef YY_TYPEDEF_YY_SIZE_T #define YY_TYPEDEF_YY_SIZE_T typedef size_t yy_size_t; @@ -604,6 +606,7 @@ char *yytext; * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA */ +#define YY_NO_INPUT 1 @@ -634,7 +637,7 @@ static int dts_version; /* = 0 */ static void push_input_file(const char *filename); static int pop_input_file(void); -#line 638 "dtc-lexer.lex.c" +#line 641 "dtc-lexer.lex.c" #define INITIAL 0 #define INCLUDE 1 @@ -656,6 +659,35 @@ static int pop_input_file(void); static int yy_init_globals (void ); +/* Accessor methods to globals. + These are made visible to non-reentrant scanners for convenience. */ + +int yylex_destroy (void ); + +int yyget_debug (void ); + +void yyset_debug (int debug_flag ); + +YY_EXTRA_TYPE yyget_extra (void ); + +void yyset_extra (YY_EXTRA_TYPE user_defined ); + +FILE *yyget_in (void ); + +void yyset_in (FILE * in_str ); + +FILE *yyget_out (void ); + +void yyset_out (FILE * out_str ); + +int yyget_leng (void ); + +char *yyget_text (void ); + +int yyget_lineno (void ); + +void yyset_lineno (int line_number ); + /* Macros after this point can all be overridden by user definitions in * section 1. */ @@ -688,7 +720,12 @@ static int input (void ); /* Amount of stuff to slurp up with each read. */ #ifndef YY_READ_BUF_SIZE +#ifdef __ia64__ +/* On IA-64, the buffer size is 16k, not 8k */ +#define YY_READ_BUF_SIZE 16384 +#else #define YY_READ_BUF_SIZE 8192 +#endif /* __ia64__ */ #endif /* Copy whatever the last rule matched to the standard output. */ @@ -696,7 +733,7 @@ static int input (void ); /* This used to be an fputs(), but since the string might contain NUL's, * we now use fwrite(). */ -#define ECHO fwrite( yytext, yyleng, 1, yyout ) +#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) #endif /* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, @@ -707,7 +744,7 @@ static int input (void ); if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ { \ int c = '*'; \ - int n; \ + size_t n; \ for ( n = 0; n < max_size && \ (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ buf[n] = (char) c; \ @@ -791,7 +828,7 @@ YY_DECL #line 64 "dtc-lexer.l" -#line 795 "dtc-lexer.lex.c" +#line 832 "dtc-lexer.lex.c" if ( !(yy_init) ) { @@ -1116,7 +1153,7 @@ YY_RULE_SETUP #line 222 "dtc-lexer.l" ECHO; YY_BREAK -#line 1120 "dtc-lexer.lex.c" +#line 1157 "dtc-lexer.lex.c" case YY_END_OF_BUFFER: { @@ -1840,8 +1877,8 @@ YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) /** Setup the input buffer state to scan the given bytes. The next call to yylex() will * scan from a @e copy of @a bytes. - * @param bytes the byte buffer to scan - * @param len the number of bytes in the buffer pointed to by @a bytes. + * @param yybytes the byte buffer to scan + * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. * * @return the newly allocated buffer state object. */ -- GitLab From 5ccd991548894f0b699f7d0137c31758a6948ddc Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 15:53:55 -0700 Subject: [PATCH 0859/1165] dtc: Mark various internal functions static Signed-off-by: Josh Triplett --- scripts/dtc/data.c | 2 +- scripts/dtc/libfdt/fdt_ro.c | 2 +- scripts/dtc/treesource.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/scripts/dtc/data.c b/scripts/dtc/data.c index dd2e3d39d4c..fe555e819bf 100644 --- a/scripts/dtc/data.c +++ b/scripts/dtc/data.c @@ -217,7 +217,7 @@ struct data data_insert_at_marker(struct data d, struct marker *m, return d; } -struct data data_append_markers(struct data d, struct marker *m) +static struct data data_append_markers(struct data d, struct marker *m) { struct marker **mp = &d.markers; diff --git a/scripts/dtc/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c index fbbba44fcd0..22e692919ff 100644 --- a/scripts/dtc/libfdt/fdt_ro.c +++ b/scripts/dtc/libfdt/fdt_ro.c @@ -411,7 +411,7 @@ int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) &phandle, sizeof(phandle)); } -int _stringlist_contains(const char *strlist, int listlen, const char *str) +static int _stringlist_contains(const char *strlist, int listlen, const char *str) { int len = strlen(str); const char *p; diff --git a/scripts/dtc/treesource.c b/scripts/dtc/treesource.c index ebeb6eb2790..1521ff11bb9 100644 --- a/scripts/dtc/treesource.c +++ b/scripts/dtc/treesource.c @@ -52,7 +52,7 @@ static void write_prefix(FILE *f, int level) fputc('\t', f); } -int isstring(char c) +static int isstring(char c) { return (isprint(c) || (c == '\0') -- GitLab From e8e63cbf9a339c972eeb5ccf8777c8067bdfd869 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Fri, 16 Oct 2009 16:03:49 -0700 Subject: [PATCH 0860/1165] oss: Mark loadhex static in hex2hex.c Nothing outside of hex2hex.c references loadhex. Signed-off-by: Josh Triplett --- sound/oss/hex2hex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/oss/hex2hex.c b/sound/oss/hex2hex.c index 5460faae98c..041ef5c52bc 100644 --- a/sound/oss/hex2hex.c +++ b/sound/oss/hex2hex.c @@ -12,7 +12,7 @@ #define MAX_SIZE (256*1024) unsigned char buf[MAX_SIZE]; -int loadhex(FILE *inf, unsigned char *buf) +static int loadhex(FILE *inf, unsigned char *buf) { int l=0, c, i; -- GitLab From 25583d4b5aa2c9aa5ed03ecc2ce73f3922714495 Mon Sep 17 00:00:00 2001 From: Josh Triplett Date: Sun, 15 Nov 2009 14:38:47 -0800 Subject: [PATCH 0861/1165] Makefile: Add -Wmising-prototypes to HOSTCFLAGS Now that all host programs use static for all private functions and forward prototypes for all extern functions, add -Wmissing-prototypes to HOSTCFLAGS in the hopes of keeping it that way. All versions of GCC supported by the kernel handle -Wmissing-prototypes. Signed-off-by: Josh Triplett --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 326791575b0..ef8cce7ab54 100644 --- a/Makefile +++ b/Makefile @@ -221,7 +221,7 @@ CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ HOSTCC = gcc HOSTCXX = g++ -HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer +HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer HOSTCXXFLAGS = -O2 # Decide whether to build built-in, modular, or both. -- GitLab From 93f19c9fc8c98bb6d2e9825115989603ffd5cd1f Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Thu, 3 Sep 2009 12:34:19 +0300 Subject: [PATCH 0862/1165] Bluetooth: Set general bonding security for ACL by default This patch fixes double pairing issues with Secure Simple Paring support. It was observed that when pairing with SSP enabled, that the confirmation will be asked twice. http://www.spinics.net/lists/linux-bluetooth/msg02473.html This also causes bug when initiating SSP connection from Windows Vista. The reason is because bluetoothd does not store link keys since HCIGETAUTHINFO returns 0. Setting default to general bonding fixes these issues. Signed-off-by: Andrei Emeltchenko Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_conn.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index a9750984f77..b7c4224f4e7 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -211,6 +211,7 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst) conn->type = type; conn->mode = HCI_CM_ACTIVE; conn->state = BT_OPEN; + conn->auth_type = HCI_AT_GENERAL_BONDING; conn->power_save = 1; conn->disc_timeout = HCI_DISCONN_TIMEOUT; -- GitLab From a0e55a32afc2130e5ae506755e4b8eb42a23b568 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Tue, 29 Sep 2009 01:42:23 -0300 Subject: [PATCH 0863/1165] Bluetooth: Select Basic Mode as default for SOCK_SEQPACKET The default mode for SOCK_SEQPACKET is Basic Mode. So when no mode has been specified, Basic Mode shall be used. This is important for current application to keep working as expected and not cause a regression. Signed-off-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 77e9fb130ad..076caa10d2f 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -2205,7 +2205,7 @@ static int l2cap_build_conf_req(struct sock *sk, void *data) { struct l2cap_pinfo *pi = l2cap_pi(sk); struct l2cap_conf_req *req = data; - struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_ERTM }; + struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC }; void *ptr = req->data; BT_DBG("sk %p", sk); -- GitLab From 68ae6639b6dff117ba37f648f1611a4629abadf0 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Sat, 17 Oct 2009 21:41:01 -0300 Subject: [PATCH 0864/1165] Bluetooth: Fix regression with L2CAP configuration in Basic Mode Basic Mode is the default mode of operation of a L2CAP entity. In this case the RFC (Retransmission and Flow Control) configuration option should not be used at all. Normally remote L2CAP implementation should just ignore this option, but it can cause various side effects with other Bluetooth stacks that are not capable of handling unknown options. Signed-off-by: Gustavo F. Padovan Signed-off-by: Marcel Holtmann --- net/bluetooth/l2cap.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index 076caa10d2f..947f8bbb4bb 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -2394,6 +2394,10 @@ done: rfc.monitor_timeout = L2CAP_DEFAULT_MONITOR_TO; pi->conf_state |= L2CAP_CONF_MODE_DONE; + + l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, + sizeof(rfc), (unsigned long) &rfc); + break; case L2CAP_MODE_STREAMING: @@ -2401,6 +2405,10 @@ done: pi->max_pdu_size = rfc.max_pdu_size; pi->conf_state |= L2CAP_CONF_MODE_DONE; + + l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, + sizeof(rfc), (unsigned long) &rfc); + break; default: @@ -2410,9 +2418,6 @@ done: rfc.mode = pi->mode; } - l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, - sizeof(rfc), (unsigned long) &rfc); - if (result == L2CAP_CONF_SUCCESS) pi->conf_state |= L2CAP_CONF_OUTPUT_DONE; } -- GitLab From 3fa8486bae2b56d9f47c1c281866d10fb56c3adc Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 15 Nov 2009 21:14:59 -0800 Subject: [PATCH 0865/1165] r6040: fix version printing The version string already contains the printk level specifying it again results in the following message being printed: <6>r6040: RDC R6040 NAPI ... Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/r6040.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 7dfcb58b0eb..8b14c6eda7c 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -1085,7 +1085,7 @@ static int __devinit r6040_init_one(struct pci_dev *pdev, int bar = 0; u16 *adrp; - printk(KERN_INFO "%s\n", version); + printk("%s\n", version); err = pci_enable_device(pdev); if (err) -- GitLab From 655a6595af5cd7e91992bd768d7a5949f813dc0d Mon Sep 17 00:00:00 2001 From: "Stanislav O. Bezzubtsev" Date: Sun, 15 Nov 2009 21:17:02 -0800 Subject: [PATCH 0866/1165] forcedeth: mac address fix Use the existing random_ether_addr() to generate random MAC instead of doing it by-hand. Signed-off-by: Stanislav O. Bezzubtsev Signed-off-by: David S. Miller --- drivers/net/forcedeth.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 0a1c2bb27d4..73fe9777720 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5820,10 +5820,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->dev_addr); dev_printk(KERN_ERR, &pci_dev->dev, "Please complain to your hardware vendor. Switching to a random MAC.\n"); - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x00; - dev->dev_addr[2] = 0x6c; - get_random_bytes(&dev->dev_addr[3], 3); + random_ether_addr(dev->dev_addr); } dprintk(KERN_DEBUG "%s: MAC Address %pM\n", -- GitLab From 2c554e10e84e958366344aa5bd293c6feea72d89 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sun, 15 Nov 2009 21:18:13 -0800 Subject: [PATCH 0867/1165] mISDN: fix error return in HFCmulti_init() The returned error should stay negative Signed-off-by: Roel Kluin Acked-by: Karsten Keil Signed-off-by: David S. Miller --- drivers/isdn/hardware/mISDN/hfcmulti.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index faed794cf75..a6624ad252c 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -5481,7 +5481,7 @@ HFCmulti_init(void) if (err) { printk(KERN_ERR "error registering embedded driver: " "%x\n", err); - return -err; + return err; } HFC_cnt++; printk(KERN_INFO "%d devices registered\n", HFC_cnt); -- GitLab From f88c5b9887a95ce424db629ee79b57f6ef5bfddd Mon Sep 17 00:00:00 2001 From: Sriram Date: Thu, 12 Nov 2009 02:14:38 +0000 Subject: [PATCH 0868/1165] smsc911x: Fix Console Hang when bringing the interface down. In the NAPI poll function, check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in continuous softirq loop when the interface is brought down under heavy traffic(tested with Traffic Generator).Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by: Sriramakrishnan Signed-off-by: David S. Miller --- drivers/net/smsc911x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index ccdd196f529..f9cdcbcb77d 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -986,7 +986,7 @@ static int smsc911x_poll(struct napi_struct *napi, int budget) struct net_device *dev = pdata->dev; int npackets = 0; - while (likely(netif_running(dev)) && (npackets < budget)) { + while (npackets < budget) { unsigned int pktlength; unsigned int pktwords; struct sk_buff *skb; -- GitLab From 5bfa2a17f2b79eb6a63c5d47ce89d5798bba086a Mon Sep 17 00:00:00 2001 From: Sriram Date: Thu, 12 Nov 2009 01:55:42 +0000 Subject: [PATCH 0869/1165] TI Davinci EMAC : Fix Console Hang when bringing the interface down In the NAPI poll function(emac_poll), check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in a continuous softirq loop when the interface is brought down under heavy traffic(tested wit Traffic Generator). Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by: Sriramakrishnan Acked-by: Chaithrika U S Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 3179521aee9..db638037947 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2140,9 +2140,6 @@ static int emac_poll(struct napi_struct *napi, int budget) u32 status = 0; u32 num_pkts = 0; - if (!netif_running(ndev)) - return 0; - /* Check interrupt vectors and call packet processing */ status = emac_read(EMAC_MACINVECTOR); -- GitLab From e29d4363174949a7a4e46f670993d7ff43342c1c Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 15 Nov 2009 22:23:47 -0800 Subject: [PATCH 0870/1165] Revert "isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation." This reverts commit 38783e671399b5405f1fd177d602c400a9577ae6. It causes kernel bugzilla #14594 Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_ppp.c | 352 +++++++++++++++++------------------- include/linux/isdn_ppp.h | 2 +- 2 files changed, 164 insertions(+), 190 deletions(-) diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index 2d14b64202a..642d5aaf53c 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -1535,10 +1535,8 @@ static int isdn_ppp_mp_bundle_array_init(void) int sz = ISDN_MAX_CHANNELS*sizeof(ippp_bundle); if( (isdn_ppp_bundle_arr = kzalloc(sz, GFP_KERNEL)) == NULL ) return -ENOMEM; - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { + for( i = 0; i < ISDN_MAX_CHANNELS; i++ ) spin_lock_init(&isdn_ppp_bundle_arr[i].lock); - skb_queue_head_init(&isdn_ppp_bundle_arr[i].frags); - } return 0; } @@ -1571,7 +1569,7 @@ static int isdn_ppp_mp_init( isdn_net_local * lp, ippp_bundle * add_to ) if ((lp->netdev->pb = isdn_ppp_mp_bundle_alloc()) == NULL) return -ENOMEM; lp->next = lp->last = lp; /* nobody else in a queue */ - skb_queue_head_init(&lp->netdev->pb->frags); + lp->netdev->pb->frags = NULL; lp->netdev->pb->frames = 0; lp->netdev->pb->seq = UINT_MAX; } @@ -1583,29 +1581,28 @@ static int isdn_ppp_mp_init( isdn_net_local * lp, ippp_bundle * add_to ) static u32 isdn_ppp_mp_get_seq( int short_seq, struct sk_buff * skb, u32 last_seq ); -static void isdn_ppp_mp_discard(ippp_bundle *mp, struct sk_buff *from, - struct sk_buff *to); -static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *from, struct sk_buff *to, - u32 lastseq); -static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb); +static struct sk_buff * isdn_ppp_mp_discard( ippp_bundle * mp, + struct sk_buff * from, struct sk_buff * to ); +static void isdn_ppp_mp_reassembly( isdn_net_dev * net_dev, isdn_net_local * lp, + struct sk_buff * from, struct sk_buff * to ); +static void isdn_ppp_mp_free_skb( ippp_bundle * mp, struct sk_buff * skb ); static void isdn_ppp_mp_print_recv_pkt( int slot, struct sk_buff * skb ); static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, - struct sk_buff *skb) + struct sk_buff *skb) { - struct sk_buff *newfrag, *frag, *start, *nextf; - u32 newseq, minseq, thisseq; - isdn_mppp_stats *stats; struct ippp_struct *is; + isdn_net_local * lpq; + ippp_bundle * mp; + isdn_mppp_stats * stats; + struct sk_buff * newfrag, * frag, * start, *nextf; + u32 newseq, minseq, thisseq; unsigned long flags; - isdn_net_local *lpq; - ippp_bundle *mp; int slot; spin_lock_irqsave(&net_dev->pb->lock, flags); - mp = net_dev->pb; - stats = &mp->stats; + mp = net_dev->pb; + stats = &mp->stats; slot = lp->ppp_slot; if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { printk(KERN_ERR "%s: lp->ppp_slot(%d)\n", @@ -1616,19 +1613,20 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, return; } is = ippp_table[slot]; - if (++mp->frames > stats->max_queue_len) + if( ++mp->frames > stats->max_queue_len ) stats->max_queue_len = mp->frames; - + if (is->debug & 0x8) isdn_ppp_mp_print_recv_pkt(lp->ppp_slot, skb); - newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ, - skb, is->last_link_seqno); + newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ, + skb, is->last_link_seqno); + /* if this packet seq # is less than last already processed one, * toss it right away, but check for sequence start case first */ - if (mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT)) { + if( mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT) ) { mp->seq = newseq; /* the first packet: required for * rfc1990 non-compliant clients -- * prevents constant packet toss */ @@ -1638,7 +1636,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, spin_unlock_irqrestore(&mp->lock, flags); return; } - + /* find the minimum received sequence number over all links */ is->last_link_seqno = minseq = newseq; for (lpq = net_dev->queue;;) { @@ -1659,31 +1657,22 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * packets */ newfrag = skb; - /* Insert new fragment into the proper sequence slot. */ - skb_queue_walk(&mp->frags, frag) { - if (MP_SEQ(frag) == newseq) { - isdn_ppp_mp_free_skb(mp, newfrag); - newfrag = NULL; - break; - } - if (MP_LT(newseq, MP_SEQ(frag))) { - __skb_queue_before(&mp->frags, frag, newfrag); - newfrag = NULL; - break; - } - } - if (newfrag) - __skb_queue_tail(&mp->frags, newfrag); + /* if this new fragment is before the first one, then enqueue it now. */ + if ((frag = mp->frags) == NULL || MP_LT(newseq, MP_SEQ(frag))) { + newfrag->next = frag; + mp->frags = frag = newfrag; + newfrag = NULL; + } - frag = skb_peek(&mp->frags); - start = ((MP_FLAGS(frag) & MP_BEGIN_FRAG) && - (MP_SEQ(frag) == mp->seq)) ? frag : NULL; - if (!start) - goto check_overflow; + start = MP_FLAGS(frag) & MP_BEGIN_FRAG && + MP_SEQ(frag) == mp->seq ? frag : NULL; - /* main fragment traversing loop + /* + * main fragment traversing loop * * try to accomplish several tasks: + * - insert new fragment into the proper sequence slot (once that's done + * newfrag will be set to NULL) * - reassemble any complete fragment sequence (non-null 'start' * indicates there is a continguous sequence present) * - discard any incomplete sequences that are below minseq -- due @@ -1692,46 +1681,71 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * come to complete such sequence and it should be discarded * * loop completes when we accomplished the following tasks: + * - new fragment is inserted in the proper sequence ('newfrag' is + * set to NULL) * - we hit a gap in the sequence, so no reassembly/processing is * possible ('start' would be set to NULL) * * algorithm for this code is derived from code in the book * 'PPP Design And Debugging' by James Carlson (Addison-Wesley) */ - skb_queue_walk_safe(&mp->frags, frag, nextf) { - thisseq = MP_SEQ(frag); - - /* check for misplaced start */ - if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) { - printk(KERN_WARNING"isdn_mppp(seq %d): new " - "BEGIN flag with no prior END", thisseq); - stats->seqerrs++; - stats->frame_drops++; - isdn_ppp_mp_discard(mp, start, frag); - start = frag; - } else if (MP_LE(thisseq, minseq)) { - if (MP_FLAGS(frag) & MP_BEGIN_FRAG) + while (start != NULL || newfrag != NULL) { + + thisseq = MP_SEQ(frag); + nextf = frag->next; + + /* drop any duplicate fragments */ + if (newfrag != NULL && thisseq == newseq) { + isdn_ppp_mp_free_skb(mp, newfrag); + newfrag = NULL; + } + + /* insert new fragment before next element if possible. */ + if (newfrag != NULL && (nextf == NULL || + MP_LT(newseq, MP_SEQ(nextf)))) { + newfrag->next = nextf; + frag->next = nextf = newfrag; + newfrag = NULL; + } + + if (start != NULL) { + /* check for misplaced start */ + if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) { + printk(KERN_WARNING"isdn_mppp(seq %d): new " + "BEGIN flag with no prior END", thisseq); + stats->seqerrs++; + stats->frame_drops++; + start = isdn_ppp_mp_discard(mp, start,frag); + nextf = frag->next; + } + } else if (MP_LE(thisseq, minseq)) { + if (MP_FLAGS(frag) & MP_BEGIN_FRAG) start = frag; - else { + else { if (MP_FLAGS(frag) & MP_END_FRAG) - stats->frame_drops++; - __skb_unlink(skb, &mp->frags); + stats->frame_drops++; + if( mp->frags == frag ) + mp->frags = nextf; isdn_ppp_mp_free_skb(mp, frag); + frag = nextf; continue; - } + } } - - /* if we have end fragment, then we have full reassembly - * sequence -- reassemble and process packet now + + /* if start is non-null and we have end fragment, then + * we have full reassembly sequence -- reassemble + * and process packet now */ - if (MP_FLAGS(frag) & MP_END_FRAG) { - minseq = mp->seq = (thisseq+1) & MP_LONGSEQ_MASK; - /* Reassemble the packet then dispatch it */ - isdn_ppp_mp_reassembly(net_dev, lp, start, frag, thisseq); + if (start != NULL && (MP_FLAGS(frag) & MP_END_FRAG)) { + minseq = mp->seq = (thisseq+1) & MP_LONGSEQ_MASK; + /* Reassemble the packet then dispatch it */ + isdn_ppp_mp_reassembly(net_dev, lp, start, nextf); + + start = NULL; + frag = NULL; - start = NULL; - frag = NULL; - } + mp->frags = nextf; + } /* check if need to update start pointer: if we just * reassembled the packet and sequence is contiguous @@ -1742,25 +1756,26 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * below low watermark and set start to the next frag or * clear start ptr. */ - if (nextf != (struct sk_buff *)&mp->frags && + if (nextf != NULL && ((thisseq+1) & MP_LONGSEQ_MASK) == MP_SEQ(nextf)) { - /* if we just reassembled and the next one is here, - * then start another reassembly. - */ - if (frag == NULL) { + /* if we just reassembled and the next one is here, + * then start another reassembly. */ + + if (frag == NULL) { if (MP_FLAGS(nextf) & MP_BEGIN_FRAG) - start = nextf; - else { - printk(KERN_WARNING"isdn_mppp(seq %d):" - " END flag with no following " - "BEGIN", thisseq); + start = nextf; + else + { + printk(KERN_WARNING"isdn_mppp(seq %d):" + " END flag with no following " + "BEGIN", thisseq); stats->seqerrs++; } } - } else { - if (nextf != (struct sk_buff *)&mp->frags && - frag != NULL && - MP_LT(thisseq, minseq)) { + + } else { + if ( nextf != NULL && frag != NULL && + MP_LT(thisseq, minseq)) { /* we've got a break in the sequence * and we not at the end yet * and we did not just reassembled @@ -1769,39 +1784,41 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp, * discard all the frames below low watermark * and start over */ stats->frame_drops++; - isdn_ppp_mp_discard(mp, start, nextf); + mp->frags = isdn_ppp_mp_discard(mp,start,nextf); } /* break in the sequence, no reassembly */ - start = NULL; - } - if (!start) - break; - } - -check_overflow: + start = NULL; + } + + frag = nextf; + } /* while -- main loop */ + + if (mp->frags == NULL) + mp->frags = frag; + /* rather straighforward way to deal with (not very) possible - * queue overflow - */ + * queue overflow */ if (mp->frames > MP_MAX_QUEUE_LEN) { stats->overflows++; - skb_queue_walk_safe(&mp->frags, frag, nextf) { - if (mp->frames <= MP_MAX_QUEUE_LEN) - break; - __skb_unlink(frag, &mp->frags); - isdn_ppp_mp_free_skb(mp, frag); + while (mp->frames > MP_MAX_QUEUE_LEN) { + frag = mp->frags->next; + isdn_ppp_mp_free_skb(mp, mp->frags); + mp->frags = frag; } } spin_unlock_irqrestore(&mp->lock, flags); } -static void isdn_ppp_mp_cleanup(isdn_net_local *lp) +static void isdn_ppp_mp_cleanup( isdn_net_local * lp ) { - struct sk_buff *skb, *tmp; - - skb_queue_walk_safe(&lp->netdev->pb->frags, skb, tmp) { - __skb_unlink(skb, &lp->netdev->pb->frags); - isdn_ppp_mp_free_skb(lp->netdev->pb, skb); - } + struct sk_buff * frag = lp->netdev->pb->frags; + struct sk_buff * nextfrag; + while( frag ) { + nextfrag = frag->next; + isdn_ppp_mp_free_skb(lp->netdev->pb, frag); + frag = nextfrag; + } + lp->netdev->pb->frags = NULL; } static u32 isdn_ppp_mp_get_seq( int short_seq, @@ -1838,115 +1855,72 @@ static u32 isdn_ppp_mp_get_seq( int short_seq, return seq; } -static void isdn_ppp_mp_discard(ippp_bundle *mp, struct sk_buff *from, - struct sk_buff *to) +struct sk_buff * isdn_ppp_mp_discard( ippp_bundle * mp, + struct sk_buff * from, struct sk_buff * to ) { - if (from) { - struct sk_buff *skb, *tmp; - int freeing = 0; - - skb_queue_walk_safe(&mp->frags, skb, tmp) { - if (skb == to) - break; - if (skb == from) - freeing = 1; - if (!freeing) - continue; - __skb_unlink(skb, &mp->frags); - isdn_ppp_mp_free_skb(mp, skb); + if( from ) + while (from != to) { + struct sk_buff * next = from->next; + isdn_ppp_mp_free_skb(mp, from); + from = next; } - } -} - -static unsigned int calc_tot_len(struct sk_buff_head *queue, - struct sk_buff *from, struct sk_buff *to) -{ - unsigned int tot_len = 0; - struct sk_buff *skb; - int found_start = 0; - - skb_queue_walk(queue, skb) { - if (skb == from) - found_start = 1; - if (!found_start) - continue; - tot_len += skb->len - MP_HEADER_LEN; - if (skb == to) - break; - } - return tot_len; + return from; } -/* Reassemble packet using fragments in the reassembly queue from - * 'from' until 'to', inclusive. - */ -static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *from, struct sk_buff *to, - u32 lastseq) +void isdn_ppp_mp_reassembly( isdn_net_dev * net_dev, isdn_net_local * lp, + struct sk_buff * from, struct sk_buff * to ) { - ippp_bundle *mp = net_dev->pb; - unsigned int tot_len; - struct sk_buff *skb; + ippp_bundle * mp = net_dev->pb; int proto; + struct sk_buff * skb; + unsigned int tot_len; if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) { printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n", __func__, lp->ppp_slot); return; } - - tot_len = calc_tot_len(&mp->frags, from, to); - - if (MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG)) { - if (ippp_table[lp->ppp_slot]->debug & 0x40) + if( MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG) ) { + if( ippp_table[lp->ppp_slot]->debug & 0x40 ) printk(KERN_DEBUG "isdn_mppp: reassembly: frame %d, " - "len %d\n", MP_SEQ(from), from->len); + "len %d\n", MP_SEQ(from), from->len ); skb = from; skb_pull(skb, MP_HEADER_LEN); - __skb_unlink(skb, &mp->frags); mp->frames--; } else { - struct sk_buff *walk, *tmp; - int found_start = 0; + struct sk_buff * frag; + int n; - if (ippp_table[lp->ppp_slot]->debug & 0x40) - printk(KERN_DEBUG"isdn_mppp: reassembling frames %d " - "to %d, len %d\n", MP_SEQ(from), lastseq, - tot_len); + for(tot_len=n=0, frag=from; frag != to; frag=frag->next, n++) + tot_len += frag->len - MP_HEADER_LEN; - skb = dev_alloc_skb(tot_len); - if (!skb) + if( ippp_table[lp->ppp_slot]->debug & 0x40 ) + printk(KERN_DEBUG"isdn_mppp: reassembling frames %d " + "to %d, len %d\n", MP_SEQ(from), + (MP_SEQ(from)+n-1) & MP_LONGSEQ_MASK, tot_len ); + if( (skb = dev_alloc_skb(tot_len)) == NULL ) { printk(KERN_ERR "isdn_mppp: cannot allocate sk buff " - "of size %d\n", tot_len); - - found_start = 0; - skb_queue_walk_safe(&mp->frags, walk, tmp) { - if (walk == from) - found_start = 1; - if (!found_start) - continue; + "of size %d\n", tot_len); + isdn_ppp_mp_discard(mp, from, to); + return; + } - if (skb) { - unsigned int len = walk->len - MP_HEADER_LEN; - skb_copy_from_linear_data_offset(walk, MP_HEADER_LEN, - skb_put(skb, len), - len); - } - __skb_unlink(walk, &mp->frags); - isdn_ppp_mp_free_skb(mp, walk); + while( from != to ) { + unsigned int len = from->len - MP_HEADER_LEN; - if (walk == to) - break; + skb_copy_from_linear_data_offset(from, MP_HEADER_LEN, + skb_put(skb,len), + len); + frag = from->next; + isdn_ppp_mp_free_skb(mp, from); + from = frag; } } - if (!skb) - return; - proto = isdn_ppp_strip_proto(skb); isdn_ppp_push_higher(net_dev, lp, skb, proto); } -static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb) +static void isdn_ppp_mp_free_skb(ippp_bundle * mp, struct sk_buff * skb) { dev_kfree_skb(skb); mp->frames--; diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h index 4c218ee7587..8687a7dc063 100644 --- a/include/linux/isdn_ppp.h +++ b/include/linux/isdn_ppp.h @@ -157,7 +157,7 @@ typedef struct { typedef struct { int mp_mrru; /* unused */ - struct sk_buff_head frags; /* fragments sl list */ + struct sk_buff * frags; /* fragments sl list -- use skb->next */ long frames; /* number of frames in the frame list */ unsigned int seq; /* last processed packet seq #: any packets * with smaller seq # will be dropped -- GitLab From bf97402052483c125a9ea7bf13df0dd9b4134078 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 16 Nov 2009 11:07:17 +0200 Subject: [PATCH 0871/1165] ALSA: ice1724 - make some bitfields unsigned This is a clean up and doesn't change the behavior. Bit fields should always be unsigned. Otherwise pm_suspend_enabled will be -1 when you want it to be 1. The other bad thing is that the sparse checker will complain 36 times if they aren't unsigned. The other bitfields in that struct are unsigned already. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai --- sound/pci/ice1712/ice1712.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/pci/ice1712/ice1712.h b/sound/pci/ice1712/ice1712.h index 9da2dae64c5..d063149e704 100644 --- a/sound/pci/ice1712/ice1712.h +++ b/sound/pci/ice1712/ice1712.h @@ -382,8 +382,8 @@ struct snd_ice1712 { #ifdef CONFIG_PM int (*pm_suspend)(struct snd_ice1712 *); int (*pm_resume)(struct snd_ice1712 *); - int pm_suspend_enabled:1; - int pm_saved_is_spdif_master:1; + unsigned int pm_suspend_enabled:1; + unsigned int pm_saved_is_spdif_master:1; unsigned int pm_saved_spdif_ctrl; unsigned char pm_saved_spdif_cfg; unsigned int pm_saved_route; -- GitLab From 60ef66fcf40f0e7bc9579981aa16bd8218942a83 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 13 Oct 2009 13:06:50 +0100 Subject: [PATCH 0872/1165] regulator: Handle missing constraints in _regulator_disable() Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 744ea1d0b59..efe568deda1 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1283,7 +1283,8 @@ static int _regulator_disable(struct regulator_dev *rdev) return -EIO; /* are we the last user and permitted to disable ? */ - if (rdev->use_count == 1 && !rdev->constraints->always_on) { + if (rdev->use_count == 1 && + (rdev->constraints && !rdev->constraints->always_on)) { /* we are last user */ if (_regulator_can_change_status(rdev) && -- GitLab From 9a767d43fbddb3319dca568df49c48e0d1bb6bd8 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 16 Oct 2009 14:16:15 +0200 Subject: [PATCH 0873/1165] regulator: Fix check of unsigned return value and transmit errors in wm831x_gp_ldo_get_mode() If ret is unsigned, the checks for negative wm831x_reg_read() return values are wrong. The error value should be transmitted to its caller, e.g. wm831x_gp_ldo_get_status() which tests for a negative return value. Signed-off-by: Roel Kluin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/wm831x-ldo.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c index bb61aede480..902db56ce09 100644 --- a/drivers/regulator/wm831x-ldo.c +++ b/drivers/regulator/wm831x-ldo.c @@ -175,18 +175,18 @@ static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev) struct wm831x *wm831x = ldo->wm831x; int ctrl_reg = ldo->base + WM831X_LDO_CONTROL; int on_reg = ldo->base + WM831X_LDO_ON_CONTROL; - unsigned int ret; + int ret; ret = wm831x_reg_read(wm831x, on_reg); if (ret < 0) - return 0; + return ret; if (!(ret & WM831X_LDO1_ON_MODE)) return REGULATOR_MODE_NORMAL; ret = wm831x_reg_read(wm831x, ctrl_reg); if (ret < 0) - return 0; + return ret; if (ret & WM831X_LDO1_LP_MODE) return REGULATOR_MODE_STANDBY; -- GitLab From 91e9c07bd635353d1a278bdb38dbb56ac371bcb8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 15 Nov 2009 23:30:24 +0000 Subject: [PATCH 0874/1165] net: Fix the rollback test in dev_change_name() net: Fix the rollback test in dev_change_name() In dev_change_name() an err variable is used for storing the original call_netdevice_notifiers() errno (negative) and testing for a rollback error later, but the test for non-zero is wrong, because the err might have positive value as well - from dev_alloc_name(). It means the rollback for a netdevice with a number > 0 will never happen. (The err test is reordered btw. to make it more readable.) Signed-off-by: Jarek Poplawski Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/dev.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index b8f74cfb1bf..fe10551d367 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -942,14 +942,15 @@ rollback: ret = notifier_to_errno(ret); if (ret) { - if (err) { - printk(KERN_ERR - "%s: name change rollback failed: %d.\n", - dev->name, ret); - } else { + /* err >= 0 after dev_alloc_name() or stores the first errno */ + if (err >= 0) { err = ret; memcpy(dev->name, oldname, IFNAMSIZ); goto rollback; + } else { + printk(KERN_ERR + "%s: name change rollback failed: %d.\n", + dev->name, ret); } } -- GitLab From be4c23c93c4828d36ac9e1a88410618a61676426 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 16 Nov 2009 12:45:39 +0100 Subject: [PATCH 0875/1165] hwmon: (s3c-hwmon) Ignore invalid divider settings Avoid registering channels that have zero divider settings in them, as this will only lead to kernel OOPS from divide-by-zero when the sysfs entry is read. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare --- drivers/hwmon/s3c-hwmon.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/s3c-hwmon.c b/drivers/hwmon/s3c-hwmon.c index 3a524f2fe49..71835412529 100644 --- a/drivers/hwmon/s3c-hwmon.c +++ b/drivers/hwmon/s3c-hwmon.c @@ -323,14 +323,21 @@ static int __devinit s3c_hwmon_probe(struct platform_device *dev) } for (i = 0; i < ARRAY_SIZE(pdata->in); i++) { - if (!pdata->in[i]) + struct s3c24xx_adc_hwmon_incfg *cfg = pdata->in[i]; + + if (!cfg) continue; - if (pdata->in[i]->mult >= 0x10000) + if (cfg->mult >= 0x10000) dev_warn(&dev->dev, "channel %d multiplier too large\n", i); + if (cfg->divider == 0) { + dev_err(&dev->dev, "channel %d divider zero\n", i); + continue; + } + ret = s3c_hwmon_create_attr(&dev->dev, pdata->in[i], &hwmon->attrs[i], i); if (ret) { -- GitLab From cf312e077662ec3a07529551ab6e885828ccfb1d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 16 Nov 2009 12:45:39 +0100 Subject: [PATCH 0876/1165] hwmon: (adt7475) Fix temperature fault flags The logic of temperature fault flags is wrong, it shows faults when there are none and vice versa. Fix it. I can't believe this has been broken since the driver was added, 8 months ago, basically breaking temp1 and temp3, and nobody ever complained. Signed-off-by: Jean Delvare Acked-by: Hans de Goede Cc: Jordan Crouse --- drivers/hwmon/adt7475.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index d39877a7da6..d15819b4fe5 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -350,8 +350,7 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *attr, case FAULT: /* Note - only for remote1 and remote2 */ - out = data->alarms & (sattr->index ? 0x8000 : 0x4000); - out = out ? 0 : 1; + out = !!(data->alarms & (sattr->index ? 0x8000 : 0x4000)); break; default: -- GitLab From 56e35eeebed2dcb4e1a17ad119e039cf095854ac Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 16 Nov 2009 12:45:40 +0100 Subject: [PATCH 0877/1165] hwmon: (adt7475) Cache limits for 60 seconds The comment says that limits are cached for 60 seconds but the code actually caches them for only 2 seconds. Align the code on the comment, as 60 seconds makes more sense. Signed-off-by: Jean Delvare Acked-by: Hans de Goede Cc: Jordan Crouse --- drivers/hwmon/adt7475.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index d15819b4fe5..20579fad4a2 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -1151,7 +1151,7 @@ static struct adt7475_data *adt7475_update_device(struct device *dev) } /* Limits and settings, should never change update every 60 seconds */ - if (time_after(jiffies, data->limits_updated + HZ * 2) || + if (time_after(jiffies, data->limits_updated + HZ * 60) || !data->valid) { data->config5 = adt7475_read(REG_CONFIG5); -- GitLab From 84d2a314bbe440d7c2e8636a1923aa3ea1aca51b Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 16 Nov 2009 12:45:40 +0100 Subject: [PATCH 0878/1165] hwmon: (adt7475) Fix sysfs file names The adt7475 driver creates pwm#_auto_channel_temp attributes instead of the standard pwm#_auto_channels_temp. Fix it. Signed-off-by: Jean Delvare Acked-by: Hans de Goede Cc: Jordan Crouse --- drivers/hwmon/adt7475.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index 20579fad4a2..b5a95193c69 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -862,7 +862,7 @@ static SENSOR_DEVICE_ATTR_2(pwm1_freq, S_IRUGO | S_IWUSR, show_pwmfreq, set_pwmfreq, INPUT, 0); static SENSOR_DEVICE_ATTR_2(pwm1_enable, S_IRUGO | S_IWUSR, show_pwmctrl, set_pwmctrl, INPUT, 0); -static SENSOR_DEVICE_ATTR_2(pwm1_auto_channel_temp, S_IRUGO | S_IWUSR, +static SENSOR_DEVICE_ATTR_2(pwm1_auto_channels_temp, S_IRUGO | S_IWUSR, show_pwmchan, set_pwmchan, INPUT, 0); static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, set_pwm, MIN, 0); @@ -874,7 +874,7 @@ static SENSOR_DEVICE_ATTR_2(pwm2_freq, S_IRUGO | S_IWUSR, show_pwmfreq, set_pwmfreq, INPUT, 1); static SENSOR_DEVICE_ATTR_2(pwm2_enable, S_IRUGO | S_IWUSR, show_pwmctrl, set_pwmctrl, INPUT, 1); -static SENSOR_DEVICE_ATTR_2(pwm2_auto_channel_temp, S_IRUGO | S_IWUSR, +static SENSOR_DEVICE_ATTR_2(pwm2_auto_channels_temp, S_IRUGO | S_IWUSR, show_pwmchan, set_pwmchan, INPUT, 1); static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, set_pwm, MIN, 1); @@ -886,7 +886,7 @@ static SENSOR_DEVICE_ATTR_2(pwm3_freq, S_IRUGO | S_IWUSR, show_pwmfreq, set_pwmfreq, INPUT, 2); static SENSOR_DEVICE_ATTR_2(pwm3_enable, S_IRUGO | S_IWUSR, show_pwmctrl, set_pwmctrl, INPUT, 2); -static SENSOR_DEVICE_ATTR_2(pwm3_auto_channel_temp, S_IRUGO | S_IWUSR, +static SENSOR_DEVICE_ATTR_2(pwm3_auto_channels_temp, S_IRUGO | S_IWUSR, show_pwmchan, set_pwmchan, INPUT, 2); static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_pwm, S_IRUGO | S_IWUSR, show_pwm, set_pwm, MIN, 2); @@ -946,19 +946,19 @@ static struct attribute *adt7475_attrs[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm1_freq.dev_attr.attr, &sensor_dev_attr_pwm1_enable.dev_attr.attr, - &sensor_dev_attr_pwm1_auto_channel_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm2.dev_attr.attr, &sensor_dev_attr_pwm2_freq.dev_attr.attr, &sensor_dev_attr_pwm2_enable.dev_attr.attr, - &sensor_dev_attr_pwm2_auto_channel_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr, &sensor_dev_attr_pwm3.dev_attr.attr, &sensor_dev_attr_pwm3_freq.dev_attr.attr, &sensor_dev_attr_pwm3_enable.dev_attr.attr, - &sensor_dev_attr_pwm3_auto_channel_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr, &sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr, NULL, -- GitLab From 1e0fa6bd8c7468067f2e988c7a416dafd0651c34 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 2 Oct 2009 11:28:18 +0200 Subject: [PATCH 0879/1165] backlight: lcd - Fix wrong sizeof Which is why I have always preferred sizeof(struct foo) over sizeof(var). Signed-off-by: Jean Delvare Signed-off-by: Richard Purdie --- drivers/video/backlight/lcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/backlight/lcd.c b/drivers/video/backlight/lcd.c index b6449470106..a482dd7b031 100644 --- a/drivers/video/backlight/lcd.c +++ b/drivers/video/backlight/lcd.c @@ -56,7 +56,7 @@ static int fb_notifier_callback(struct notifier_block *self, static int lcd_register_fb(struct lcd_device *ld) { - memset(&ld->fb_notif, 0, sizeof(&ld->fb_notif)); + memset(&ld->fb_notif, 0, sizeof(ld->fb_notif)); ld->fb_notif.notifier_call = fb_notifier_callback; return fb_register_client(&ld->fb_notif); } -- GitLab From 716bdf1874647196ac16dd2a1ad359d88844795a Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 6 Nov 2009 15:58:31 +0000 Subject: [PATCH 0880/1165] backlight: Fix backlight limiting on spitz/corgi devices On spitz (& similar) machines, if battery is running low, backlight needs to be limited to lower step. Unfortunately, current code uses &= for limiting, turning backlight off completely for some backlight settings. Fix that. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Richard Purdie --- drivers/video/backlight/corgi_lcd.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c index 2211a852af9..96774949cd3 100644 --- a/drivers/video/backlight/corgi_lcd.c +++ b/drivers/video/backlight/corgi_lcd.c @@ -433,8 +433,9 @@ static int corgi_bl_update_status(struct backlight_device *bd) if (corgibl_flags & CORGIBL_SUSPENDED) intensity = 0; - if (corgibl_flags & CORGIBL_BATTLOW) - intensity &= lcd->limit_mask; + + if ((corgibl_flags & CORGIBL_BATTLOW) && intensity > lcd->limit_mask) + intensity = lcd->limit_mask; return corgi_bl_set_intensity(lcd, intensity); } -- GitLab From 0b4634fce1f3f7028421630260d54093276db490 Mon Sep 17 00:00:00 2001 From: Dmitry Eremin-Solenikov Date: Mon, 16 Nov 2009 01:48:32 +0300 Subject: [PATCH 0881/1165] leds-gpio: fix possible crash on OF device unbinding If there are leds present in the OF tree, but the GPIOs for (some) of them are unavailable, led_data doesn't get populated with correct devices. Then, on device unbinding, one can crash the kernel. Workaround this by setting led->gpio to invalid value early. Signed-off-by: Dmitry Eremin-Solenikov Signed-off-by: Richard Purdie --- drivers/leds/leds-gpio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c index 7467980b8cf..e5225d28f39 100644 --- a/drivers/leds/leds-gpio.c +++ b/drivers/leds/leds-gpio.c @@ -78,6 +78,8 @@ static int __devinit create_gpio_led(const struct gpio_led *template, { int ret, state; + led_dat->gpio = -1; + /* skip leds that aren't available */ if (!gpio_is_valid(template->gpio)) { printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n", -- GitLab From 80099c707e0915ac3159ddc70fb714adbb3d53e3 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 16 Nov 2009 11:05:03 +0200 Subject: [PATCH 0882/1165] dereferencing freed memory regulator_fixed_voltage_remove() Don't dereference drvdata after it has been freed. regards, dan carpenter Signed-off-by: Dan Carpenter Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/fixed.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index f8b295700d7..f9f516a3028 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -196,11 +196,10 @@ static int regulator_fixed_voltage_remove(struct platform_device *pdev) struct fixed_voltage_data *drvdata = platform_get_drvdata(pdev); regulator_unregister(drvdata->dev); - kfree(drvdata->desc.name); - kfree(drvdata); - if (gpio_is_valid(drvdata->gpio)) gpio_free(drvdata->gpio); + kfree(drvdata->desc.name); + kfree(drvdata); return 0; } -- GitLab From 62c5593aea4b71d61dc0f37fea96c556c158a042 Mon Sep 17 00:00:00 2001 From: Huang Ying Date: Mon, 16 Nov 2009 21:52:22 +0800 Subject: [PATCH 0883/1165] crypto: gcm - fix another complete call in complete fuction The flow of the complete function (xxx_done) in gcm.c is as follow: void complete(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; if (!err) { err = async_next_step(); if (err == -EINPROGRESS || err == -EBUSY) return; } complete_for_next_step(areq, err); } But *areq may be destroyed in async_next_step(), this makes complete_for_next_step() can not work properly. To fix this, one of following methods is used for each complete function. - Add a __complete() for each complete(), which accept struct aead_request *req instead of areq, so avoid using areq after it is destroyed. - Expand complete_for_next_step(). The fixing method is based on the idea of Herbert Xu. Signed-off-by: Huang Ying Signed-off-by: Herbert Xu --- crypto/gcm.c | 107 +++++++++++++++++++++++++++++++++++---------------- 1 file changed, 73 insertions(+), 34 deletions(-) diff --git a/crypto/gcm.c b/crypto/gcm.c index 5fc3292483e..c6547130624 100644 --- a/crypto/gcm.c +++ b/crypto/gcm.c @@ -40,7 +40,7 @@ struct crypto_rfc4106_ctx { struct crypto_gcm_ghash_ctx { unsigned int cryptlen; struct scatterlist *src; - crypto_completion_t complete; + void (*complete)(struct aead_request *req, int err); }; struct crypto_gcm_req_priv_ctx { @@ -267,23 +267,26 @@ static int gcm_hash_final(struct aead_request *req, return crypto_ahash_final(ahreq); } -static void gcm_hash_final_done(struct crypto_async_request *areq, - int err) +static void __gcm_hash_final_done(struct aead_request *req, int err) { - struct aead_request *req = areq->data; struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx; if (!err) crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16); - gctx->complete(areq, err); + gctx->complete(req, err); } -static void gcm_hash_len_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_final_done(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; + + __gcm_hash_final_done(req, err); +} + +static void __gcm_hash_len_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); if (!err) { @@ -292,13 +295,18 @@ static void gcm_hash_len_done(struct crypto_async_request *areq, return; } - gcm_hash_final_done(areq, err); + __gcm_hash_final_done(req, err); } -static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_len_done(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; + + __gcm_hash_len_done(req, err); +} + +static void __gcm_hash_crypt_remain_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); if (!err) { @@ -307,13 +315,19 @@ static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq, return; } - gcm_hash_len_done(areq, err); + __gcm_hash_len_done(req, err); } -static void gcm_hash_crypt_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_crypt_remain_done(struct crypto_async_request *areq, + int err) { struct aead_request *req = areq->data; + + __gcm_hash_crypt_remain_done(req, err); +} + +static void __gcm_hash_crypt_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx; unsigned int remain; @@ -327,13 +341,18 @@ static void gcm_hash_crypt_done(struct crypto_async_request *areq, return; } - gcm_hash_crypt_remain_done(areq, err); + __gcm_hash_crypt_remain_done(req, err); } -static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_crypt_done(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; + + __gcm_hash_crypt_done(req, err); +} + +static void __gcm_hash_assoc_remain_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx; crypto_completion_t complete; @@ -350,15 +369,21 @@ static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq, } if (remain) - gcm_hash_crypt_done(areq, err); + __gcm_hash_crypt_done(req, err); else - gcm_hash_crypt_remain_done(areq, err); + __gcm_hash_crypt_remain_done(req, err); } -static void gcm_hash_assoc_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_assoc_remain_done(struct crypto_async_request *areq, + int err) { struct aead_request *req = areq->data; + + __gcm_hash_assoc_remain_done(req, err); +} + +static void __gcm_hash_assoc_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); unsigned int remain; @@ -371,13 +396,18 @@ static void gcm_hash_assoc_done(struct crypto_async_request *areq, return; } - gcm_hash_assoc_remain_done(areq, err); + __gcm_hash_assoc_remain_done(req, err); } -static void gcm_hash_init_done(struct crypto_async_request *areq, - int err) +static void gcm_hash_assoc_done(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; + + __gcm_hash_assoc_done(req, err); +} + +static void __gcm_hash_init_done(struct aead_request *req, int err) +{ struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); crypto_completion_t complete; unsigned int remain = 0; @@ -393,9 +423,16 @@ static void gcm_hash_init_done(struct crypto_async_request *areq, } if (remain) - gcm_hash_assoc_done(areq, err); + __gcm_hash_assoc_done(req, err); else - gcm_hash_assoc_remain_done(areq, err); + __gcm_hash_assoc_remain_done(req, err); +} + +static void gcm_hash_init_done(struct crypto_async_request *areq, int err) +{ + struct aead_request *req = areq->data; + + __gcm_hash_init_done(req, err); } static int gcm_hash(struct aead_request *req, @@ -457,10 +494,8 @@ static void gcm_enc_copy_hash(struct aead_request *req, crypto_aead_authsize(aead), 1); } -static void gcm_enc_hash_done(struct crypto_async_request *areq, - int err) +static void gcm_enc_hash_done(struct aead_request *req, int err) { - struct aead_request *req = areq->data; struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); if (!err) @@ -469,8 +504,7 @@ static void gcm_enc_hash_done(struct crypto_async_request *areq, aead_request_complete(req, err); } -static void gcm_encrypt_done(struct crypto_async_request *areq, - int err) +static void gcm_encrypt_done(struct crypto_async_request *areq, int err) { struct aead_request *req = areq->data; struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); @@ -479,9 +513,13 @@ static void gcm_encrypt_done(struct crypto_async_request *areq, err = gcm_hash(req, pctx); if (err == -EINPROGRESS || err == -EBUSY) return; + else if (!err) { + crypto_xor(pctx->auth_tag, pctx->iauth_tag, 16); + gcm_enc_copy_hash(req, pctx); + } } - gcm_enc_hash_done(areq, err); + aead_request_complete(req, err); } static int crypto_gcm_encrypt(struct aead_request *req) @@ -538,9 +576,8 @@ static void gcm_decrypt_done(struct crypto_async_request *areq, int err) aead_request_complete(req, err); } -static void gcm_dec_hash_done(struct crypto_async_request *areq, int err) +static void gcm_dec_hash_done(struct aead_request *req, int err) { - struct aead_request *req = areq->data; struct crypto_gcm_req_priv_ctx *pctx = crypto_gcm_reqctx(req); struct ablkcipher_request *abreq = &pctx->u.abreq; struct crypto_gcm_ghash_ctx *gctx = &pctx->ghash_ctx; @@ -552,9 +589,11 @@ static void gcm_dec_hash_done(struct crypto_async_request *areq, int err) err = crypto_ablkcipher_decrypt(abreq); if (err == -EINPROGRESS || err == -EBUSY) return; + else if (!err) + err = crypto_gcm_verify(req, pctx); } - gcm_decrypt_done(areq, err); + aead_request_complete(req, err); } static int crypto_gcm_decrypt(struct aead_request *req) -- GitLab From f534dc994397560343be4a3223b9bbaa8e739e1f Mon Sep 17 00:00:00 2001 From: Suresh Jayaraman Date: Mon, 16 Nov 2009 12:03:16 +0530 Subject: [PATCH 0884/1165] cifs: clear server inode number flag while autodisabling Fix the commit ec06aedd44 that intended to turn off querying for server inode numbers when server doesn't consistently support inode numbers. Presumably the commit didn't actually clear the CIFS_MOUNT_SERVER_INUM flag, perhaps a typo. Signed-off-by: Suresh Jayaraman Acked-by: Jeff Layton Cc: Stable Signed-off-by: Steve French --- fs/cifs/misc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 1e25efcb55c..d27d4ec6579 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -720,7 +720,7 @@ void cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb) { if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) { - cifs_sb->mnt_cifs_flags &= CIFS_MOUNT_SERVER_INUM; + cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM; cERROR(1, ("Autodisabling the use of server inode numbers on " "%s. This server doesn't seem to support them " "properly. Hardlinks will not be recognized on this " -- GitLab From 0f74296a0f818d8ae52d9b77ec531e8dd804dda3 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 20 Oct 2009 16:32:53 +0200 Subject: [PATCH 0885/1165] at91: at91sam9g20ek modify dual slot evaluation kit at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: Nicolas Ferre Acked-by: Andrew Victor --- arch/arm/mach-at91/Kconfig | 20 ++++++++-------- .../arm/mach-at91/board-sam9g20ek-2slot-mmc.c | 23 ++++++++++++------- 2 files changed, 26 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index e35d54d43e7..2fd88437348 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -289,13 +289,6 @@ config MACH_NEOCORE926 help Select this if you are using the Adeneo Neocore 926 board. -config MACH_AT91SAM9G20EK_2MMC - bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots" - depends on ARCH_AT91SAM9G20 - help - Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit - Rev A or B modified for 2 MMC Slots. - endif # ---------------------------------------------------------- @@ -322,7 +315,16 @@ config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" depends on ARCH_AT91SAM9G20 help - Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit. + Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit + that embeds only one SD/MMC slot. + +config MACH_AT91SAM9G20EK_2MMC + bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" + depends on ARCH_AT91SAM9G20 + help + Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit + with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and + onwards. config MACH_CPU9G20 bool "Eukrea CPU9G20 board" @@ -392,7 +394,7 @@ config MTD_AT91_DATAFLASH_CARD config MTD_NAND_ATMEL_BUSWIDTH_16 bool "Enable 16-bit data bus interface to NAND flash" - depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) + depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK) help On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c index a28e53faf71..a4102d72cc9 100644 --- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c +++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c @@ -90,7 +90,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_ATMELMCI) +#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91)) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -113,7 +113,7 @@ static struct spi_board_info ek_spi_devices[] = { * MACB Ethernet device */ static struct at91_eth_data __initdata ek_macb_data = { - .phy_irq_pin = AT91_PIN_PC12, + .phy_irq_pin = AT91_PIN_PB0, .is_rmii = 1, }; @@ -194,24 +194,27 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) - * det_pin and wp_pin are not connected + * wp_pin is not connected */ #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) static struct mci_platform_data __initdata ek_mmc_data = { .slot[0] = { .bus_width = 4, - .detect_pin = -ENODEV, + .detect_pin = AT91_PIN_PC2, .wp_pin = -ENODEV, }, .slot[1] = { .bus_width = 4, - .detect_pin = -ENODEV, + .detect_pin = AT91_PIN_PC9, .wp_pin = -ENODEV, }, }; #else -static struct amci_platform_data __initdata ek_mmc_data = { +static struct at91_mmc_data __initdata ek_mmc_data = { + .slot_b = 1, /* Only one slot so use slot B */ + .wire4 = 1, + .det_pin = AT91_PIN_PC9, }; #endif @@ -221,13 +224,13 @@ static struct amci_platform_data __initdata ek_mmc_data = { static struct gpio_led ek_leds[] = { { /* "bottom" led, green, userled1 to be defined */ .name = "ds5", - .gpio = AT91_PIN_PB12, + .gpio = AT91_PIN_PB8, .active_low = 1, .default_trigger = "none", }, { /* "power" led, yellow */ .name = "ds1", - .gpio = AT91_PIN_PB13, + .gpio = AT91_PIN_PB9, .default_trigger = "heartbeat", } }; @@ -254,7 +257,11 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ +#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) at91_add_device_mci(0, &ek_mmc_data); +#else + at91_add_device_mmc(0, &ek_mmc_data); +#endif /* I2C */ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* LEDs */ -- GitLab From 927585f650b51639f0262dad650eafeaf1611197 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 16 Nov 2009 16:13:35 +0000 Subject: [PATCH 0886/1165] ARM: Fix warning in sa1100-flash.c drivers/mtd/maps/sa1100-flash.c: In function 'sa1100_probe_subdev': drivers/mtd/maps/sa1100-flash.c:214: warning: format '%d' expects type 'int', but argument 3 has type 'uint64_t' Signed-off-by: Russell King --- drivers/mtd/maps/sa1100-flash.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index fdb97f3d30e..d7a47574d21 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -209,8 +209,8 @@ static int sa1100_probe_subdev(struct sa_subdev_info *subdev, struct resource *r } subdev->mtd->owner = THIS_MODULE; - printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %dMiB, " - "%d-bit\n", phys, subdev->mtd->size >> 20, + printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %uMiB, %d-bit\n", + phys, (unsigned)(subdev->mtd->size >> 20), subdev->map.bankwidth * 8); return 0; -- GitLab From 378ce74bee4cb0183489bc0f850790a2264ca975 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 14 Nov 2009 01:03:24 +0100 Subject: [PATCH 0887/1165] ARM: 5787/1: U300 COH 901 331 fixes This will fix some small issues with the COH 901 331 RTC driver: - Interrupt is disabled after alarm so that we don't fire multiple interrupts. - We return 0 from the coh901331_alarm_irq_enable() ridding a compile warning. - We alter the name in the U300 device registry to match that of the driver so they sucessfully resolve. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-u300/core.c | 2 +- drivers/rtc/rtc-coh901331.c | 11 +++++++++++ 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index be60d6deee8..653e25be3dd 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -408,7 +408,7 @@ static struct platform_device keypad_device = { }; static struct platform_device rtc_device = { - .name = "rtc0", + .name = "rtc-coh901331", .id = -1, .num_resources = ARRAY_SIZE(rtc_resources), .resource = rtc_resources, diff --git a/drivers/rtc/rtc-coh901331.c b/drivers/rtc/rtc-coh901331.c index 7fe1fa26c52..03ea530981d 100644 --- a/drivers/rtc/rtc-coh901331.c +++ b/drivers/rtc/rtc-coh901331.c @@ -58,7 +58,16 @@ static irqreturn_t coh901331_interrupt(int irq, void *data) clk_enable(rtap->clk); /* Ack IRQ */ writel(1, rtap->virtbase + COH901331_IRQ_EVENT); + /* + * Disable the interrupt. This is necessary because + * the RTC lives on a lower-clocked line and will + * not release the IRQ line until after a few (slower) + * clock cycles. The interrupt will be re-enabled when + * a new alarm is set anyway. + */ + writel(0, rtap->virtbase + COH901331_IRQ_MASK); clk_disable(rtap->clk); + /* Set alarm flag */ rtc_update_irq(rtap->rtc, 1, RTC_AF); @@ -128,6 +137,8 @@ static int coh901331_alarm_irq_enable(struct device *dev, unsigned int enabled) else writel(0, rtap->virtbase + COH901331_IRQ_MASK); clk_disable(rtap->clk); + + return 0; } static struct rtc_class_ops coh901331_ops = { -- GitLab From 10d5d99e880692a31ddc59b9f5d063e928fc0c89 Mon Sep 17 00:00:00 2001 From: Paul Parsons Date: Sat, 14 Nov 2009 16:54:12 +0000 Subject: [PATCH 0888/1165] [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values hx4700 touchscreen events were being dropped in ads7846_rx() because their pressure values consistently exceeded the platform maximum of 512; a sample of 256 pressure values were in the range 531 to 815. Doubling the platform maximum to 1024 allows hx4700 touchscreen events to pass the test. Signed-off-by: Paul Parsons Signed-off-by: Eric Miao --- arch/arm/mach-pxa/hx4700.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index abff9e13274..83bd3c6e388 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -604,7 +604,7 @@ static struct platform_device gpio_vbus = { static const struct ads7846_platform_data tsc2046_info = { .model = 7846, .vref_delay_usecs = 100, - .pressure_max = 512, + .pressure_max = 1024, .debounce_max = 10, .debounce_tol = 3, .debounce_rep = 1, -- GitLab From 7df56c2586049a06b007474ca059779c81ddb1ff Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 13 Nov 2009 11:37:34 +0100 Subject: [PATCH 0889/1165] [ARM] pxa: ensure mfp is in correct range in mfp_{read,write} Ensure we do not read/write outside array boundaries with a negative index. Signed-off-by: Roel Kluin Signed-off-by: Eric Miao --- arch/arm/plat-pxa/mfp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c index 9405d0379c8..be58f9fe65b 100644 --- a/arch/arm/plat-pxa/mfp.c +++ b/arch/arm/plat-pxa/mfp.c @@ -207,7 +207,7 @@ unsigned long mfp_read(int mfp) { unsigned long val, flags; - BUG_ON(mfp >= MFP_PIN_MAX); + BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX); spin_lock_irqsave(&mfp_spin_lock, flags); val = mfpr_readl(mfp_table[mfp].mfpr_off); @@ -220,7 +220,7 @@ void mfp_write(int mfp, unsigned long val) { unsigned long flags; - BUG_ON(mfp >= MFP_PIN_MAX); + BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX); spin_lock_irqsave(&mfp_spin_lock, flags); mfpr_writel(mfp_table[mfp].mfpr_off, val); -- GitLab From f7343deb0f6e7654c60e97606aea388b9da612c2 Mon Sep 17 00:00:00 2001 From: Vimal Singh Date: Mon, 16 Nov 2009 14:55:59 -0800 Subject: [PATCH 0890/1165] omap: Fix keymap for zoom2 according to matrix keypad framwork Interpretation of 'row' and 'col' got reversed in matrix keymap framework. Also last element '0', present in keymap array, is no more needed. Correcting zoom2 keyboard keymap accordingly. Signed-off-by: Vimal Singh Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-zoom2.c | 87 +++++++++++++++---------------- 1 file changed, 43 insertions(+), 44 deletions(-) diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index ea00486a5e5..51e0b3ba5f3 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -30,57 +30,56 @@ /* Zoom2 has Qwerty keyboard*/ static int board_keymap[] = { KEY(0, 0, KEY_E), - KEY(1, 0, KEY_R), - KEY(2, 0, KEY_T), - KEY(3, 0, KEY_HOME), - KEY(6, 0, KEY_I), - KEY(7, 0, KEY_LEFTSHIFT), - KEY(0, 1, KEY_D), + KEY(0, 1, KEY_R), + KEY(0, 2, KEY_T), + KEY(0, 3, KEY_HOME), + KEY(0, 6, KEY_I), + KEY(0, 7, KEY_LEFTSHIFT), + KEY(1, 0, KEY_D), KEY(1, 1, KEY_F), - KEY(2, 1, KEY_G), - KEY(3, 1, KEY_SEND), - KEY(6, 1, KEY_K), - KEY(7, 1, KEY_ENTER), - KEY(0, 2, KEY_X), - KEY(1, 2, KEY_C), + KEY(1, 2, KEY_G), + KEY(1, 3, KEY_SEND), + KEY(1, 6, KEY_K), + KEY(1, 7, KEY_ENTER), + KEY(2, 0, KEY_X), + KEY(2, 1, KEY_C), KEY(2, 2, KEY_V), - KEY(3, 2, KEY_END), - KEY(6, 2, KEY_DOT), - KEY(7, 2, KEY_CAPSLOCK), - KEY(0, 3, KEY_Z), - KEY(1, 3, KEY_KPPLUS), - KEY(2, 3, KEY_B), + KEY(2, 3, KEY_END), + KEY(2, 6, KEY_DOT), + KEY(2, 7, KEY_CAPSLOCK), + KEY(3, 0, KEY_Z), + KEY(3, 1, KEY_KPPLUS), + KEY(3, 2, KEY_B), KEY(3, 3, KEY_F1), - KEY(6, 3, KEY_O), - KEY(7, 3, KEY_SPACE), - KEY(0, 4, KEY_W), - KEY(1, 4, KEY_Y), - KEY(2, 4, KEY_U), - KEY(3, 4, KEY_F2), + KEY(3, 6, KEY_O), + KEY(3, 7, KEY_SPACE), + KEY(4, 0, KEY_W), + KEY(4, 1, KEY_Y), + KEY(4, 2, KEY_U), + KEY(4, 3, KEY_F2), KEY(4, 4, KEY_VOLUMEUP), - KEY(6, 4, KEY_L), - KEY(7, 4, KEY_LEFT), - KEY(0, 5, KEY_S), - KEY(1, 5, KEY_H), - KEY(2, 5, KEY_J), - KEY(3, 5, KEY_F3), + KEY(4, 6, KEY_L), + KEY(4, 7, KEY_LEFT), + KEY(5, 0, KEY_S), + KEY(5, 1, KEY_H), + KEY(5, 2, KEY_J), + KEY(5, 3, KEY_F3), KEY(5, 5, KEY_VOLUMEDOWN), - KEY(6, 5, KEY_M), - KEY(4, 5, KEY_ENTER), - KEY(7, 5, KEY_RIGHT), - KEY(0, 6, KEY_Q), - KEY(1, 6, KEY_A), - KEY(2, 6, KEY_N), - KEY(3, 6, KEY_BACKSPACE), + KEY(5, 6, KEY_M), + KEY(5, 7, KEY_ENTER), + KEY(6, 0, KEY_Q), + KEY(6, 1, KEY_A), + KEY(6, 2, KEY_N), + KEY(6, 3, KEY_BACKSPACE), KEY(6, 6, KEY_P), - KEY(7, 6, KEY_UP), KEY(6, 7, KEY_SELECT), - KEY(7, 7, KEY_DOWN), - KEY(0, 7, KEY_PROG1), /*MACRO 1 */ - KEY(1, 7, KEY_PROG2), /*MACRO 2 */ - KEY(2, 7, KEY_PROG3), /*MACRO 3 */ - KEY(3, 7, KEY_PROG4), /*MACRO 4 */ - 0 + KEY(7, 0, KEY_PROG1), /*MACRO 1 */ + KEY(7, 1, KEY_PROG2), /*MACRO 2 */ + KEY(7, 2, KEY_PROG3), /*MACRO 3 */ + KEY(7, 3, KEY_PROG4), /*MACRO 4 */ + KEY(7, 5, KEY_RIGHT), + KEY(7, 6, KEY_UP), + KEY(7, 7, KEY_DOWN) }; static struct matrix_keymap_data board_map_data = { -- GitLab From 0698989d779a994e1a6ef2f83625276f4dde6eb6 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Mon, 16 Nov 2009 22:12:13 -0800 Subject: [PATCH 0891/1165] Input: psmouse - fix breakage introduced by b7802c5c1ea Commit b7802c5c1ea ("Input: psmouse - use boolean type") caused the synaptics_hardware variable to be completely useless, as it is constantly set to 'true' throughout the whole psmouse_extensions(). This was caused by the following hunk in the commit in question - int synaptics_hardware = 0; + bool synaptics_hardware = true; which is wrong and causes driver to issue extra reset when falling back to bare PS/2 protocol. Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/psmouse-base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 5bd64841bf1..07c53798301 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -581,7 +581,7 @@ static int cortron_detect(struct psmouse *psmouse, bool set_properties) static int psmouse_extensions(struct psmouse *psmouse, unsigned int max_proto, bool set_properties) { - bool synaptics_hardware = true; + bool synaptics_hardware = false; /* * We always check for lifebook because it does not disturb mouse -- GitLab From b1e69aae77d02424ad67f337e40d439313554269 Mon Sep 17 00:00:00 2001 From: Abner Holsinger <9zabner@gmail.com> Date: Mon, 16 Nov 2009 22:12:14 -0800 Subject: [PATCH 0892/1165] Input: lifebook - fix settings for CF-72 Panasonic CF-72 uses 6-byte protocol and does not need to be tied to a particular port. Signed-off-by: Abner Holsinger <9zabner@gmail.com> Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/lifebook.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 5e630869440..82811558ec3 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -107,8 +107,7 @@ static const struct dmi_system_id lifebook_dmi_table[] = { .matches = { DMI_MATCH(DMI_PRODUCT_NAME, "CF-72"), }, - .callback = lifebook_set_serio_phys, - .driver_data = "isa0060/serio3", + .callback = lifebook_set_6byte_proto, }, { .ident = "Lifebook B142", -- GitLab From c0e1f68bce454d244e2eea6b0ab7b3a217c673d2 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Tue, 10 Nov 2009 08:37:47 +0000 Subject: [PATCH 0893/1165] ixgbe: Fixing EEH handler to handle more than one error After commmit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff EEH breaks after the second error, since it calls pci_restore_state() but it returns 0, since pci->state_saved is false. So, this patch just call pci_save_state() after pci_restore_state(). Signed-off-by: Breno Leitao Acked-by: Peter P Waskiewicz Jr Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 5bd9e6bf6f2..a5036f7c192 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -5994,6 +5994,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) } else { pci_set_master(pdev); pci_restore_state(pdev); + pci_save_state(pdev); pci_wake_from_d3(pdev, false); -- GitLab From 82b3cc1a2f5e46300a9dec4a8cc8106dc20a4c23 Mon Sep 17 00:00:00 2001 From: Ben McKeegan Date: Mon, 16 Nov 2009 03:44:25 +0000 Subject: [PATCH 0894/1165] ppp: fix BUG on non-linear SKB (multilink receive) PPP does not correctly call pskb_may_pull() on all necessary receive paths before reading the PPP protocol, thus causing PPP to report seemingly random 'unsupported protocols' and eventually trigger BUG_ON(skb->len < skb->data_len) in skb_pull_rcsum() when receiving multilink protocol in non-linear skbs. ppp_receive_nonmp_frame() does not call pskb_may_pull() before reading the protocol number. For the non-mp receive path this is not a problem, as this check is done in ppp_receive_frame(). For the mp receive path, ppp_mp_reconstruct() usually copies the data into a new linear skb. However, in the case where the frame is made up of a single mp fragment, the mp header is pulled and the existing skb used. This skb was then passed to ppp_receive_nonmp_frame() without checking if the encapsulated protocol header could safely be read. Signed-off-by: Ben McKeegan Signed-off-by: David S. Miller --- drivers/net/ppp_generic.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 9bf2a6be903..965adb6174c 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1944,8 +1944,15 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) } /* Pull completed packets off the queue and receive them. */ - while ((skb = ppp_mp_reconstruct(ppp))) - ppp_receive_nonmp_frame(ppp, skb); + while ((skb = ppp_mp_reconstruct(ppp))) { + if (pskb_may_pull(skb, 2)) + ppp_receive_nonmp_frame(ppp, skb); + else { + ++ppp->dev->stats.rx_length_errors; + kfree_skb(skb); + ppp_receive_error(ppp); + } + } return; -- GitLab From f99b4a02848afe7fae960884dfa6e7a88f545f09 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 16 Nov 2009 22:47:33 +0000 Subject: [PATCH 0895/1165] net: fix mdio section mismatch warning This fixes the following warning: WARNING: drivers/net/phy/built-in.o(.devexit.text+0x70): Section mismatch in reference from the function .mdio_gpio_bus_destroy() to the function .devinit.text:.mdio_gpio_bus_deinit() The function __devexit .mdio_gpio_bus_destroy() references a function __devinit .mdio_gpio_bus_deinit(). This is often seen when error handling in the exit function uses functionality in the init path. The fix is often to remove the __devinit annotation of .mdio_gpio_bus_deinit() so it may be used outside an init section. Signed-off-by: Stephen Rothwell Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index 8659d341e76..35897134a5d 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -139,7 +139,7 @@ out: return NULL; } -static void __devinit mdio_gpio_bus_deinit(struct device *dev) +static void mdio_gpio_bus_deinit(struct device *dev) { struct mii_bus *bus = dev_get_drvdata(dev); struct mdio_gpio_info *bitbang = bus->priv; -- GitLab From e54d5512b600aa0d492010436ff7eb0c9194efc1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 17 Nov 2009 04:46:18 -0800 Subject: [PATCH 0896/1165] sungem: Fix Serdes detection. We need to look for the 'shared-pins' property to get this right. Based upon a patch by Hermann Lauer. Signed-off-by: David S. Miller --- drivers/net/sungem.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c index 305ec3d783d..1927b3de9ee 100644 --- a/drivers/net/sungem.c +++ b/drivers/net/sungem.c @@ -2062,7 +2062,15 @@ static int gem_check_invariants(struct gem *gp) mif_cfg &= ~MIF_CFG_PSELECT; writel(mif_cfg, gp->regs + MIF_CFG); } else { - gp->phy_type = phy_serialink; +#ifdef CONFIG_SPARC + const char *p; + + p = of_get_property(gp->of_node, "shared-pins", NULL); + if (p && !strcmp(p, "serdes")) + gp->phy_type = phy_serdes; + else +#endif + gp->phy_type = phy_serialink; } if (gp->phy_type == phy_mii_mdio1 || gp->phy_type == phy_mii_mdio0) { -- GitLab From 69c0cab120a85471054614418b447349caba22d7 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 17 Nov 2009 05:18:18 -0800 Subject: [PATCH 0897/1165] gro: Fix illegal merging of trailer trash When we've merged skb's with page frags, and subsequently receive a trailer skb (< MSS) that is not completely non-linear (this can occur on Intel NICs if the packet size falls below the threshold), GRO ends up producing an illegal GSO skb with a frag_list. This is harmless unless the skb is then forwarded through an interface that requires software GSO, whereupon the GSO code will BUG. This patch detects this case in GRO and avoids merging the trailer skb. Reported-by: Mark Wagner Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- net/core/skbuff.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 80a96166df3..ec85681a7dd 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2701,7 +2701,8 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb) NAPI_GRO_CB(skb)->free = 1; goto done; - } + } else if (skb_gro_len(p) != pinfo->gso_size) + return -E2BIG; headroom = skb_headroom(p); nskb = netdev_alloc_skb(p->dev, headroom + skb_gro_offset(p)); -- GitLab From 6b863d1d3239eff0f45c2e6e672f5b56db828db0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 17 Nov 2009 06:45:04 -0800 Subject: [PATCH 0898/1165] vlan: Fix register_vlan_dev() error path In case register_netdevice() returns an error, and a new vlan_group was allocated and inserted in vlan_group_hash[] we call vlan_group_free() without deleting group from hash table. Future lookups can give infinite loops or crashes. We must delete the vlan_group using RCU safe procedure. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/8021q/vlan.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 8836575f9d7..a29c5ab5815 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -281,8 +281,11 @@ out_uninit_applicant: if (ngrp) vlan_gvrp_uninit_applicant(real_dev); out_free_group: - if (ngrp) - vlan_group_free(ngrp); + if (ngrp) { + hlist_del_rcu(&ngrp->hlist); + /* Free the group, after all cpu's are done. */ + call_rcu(&ngrp->rcu, vlan_rcu_free); + } return err; } -- GitLab From 0c3cee57efcb1c79d62b1238c0d22afef4599247 Mon Sep 17 00:00:00 2001 From: Javier Kohen Date: Tue, 17 Nov 2009 15:36:13 +0100 Subject: [PATCH 0899/1165] ALSA: usb - Quirk to disable master volume control in PCM2702 Disable the master volume control in the PCM2702 chipset. The datasheet documents two independent channel volume controls, one master mute control and one master volume control. All controls are fully functional except for the master volume control, which returns USB stalls on all GET requests. Signed-off-by: Javier Kohen Signed-off-by: Takashi Iwai --- sound/usb/usbmixer.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c index 9efcfd08d74..c998220b99c 100644 --- a/sound/usb/usbmixer.c +++ b/sound/usb/usbmixer.c @@ -1071,6 +1071,15 @@ static int parse_audio_feature_unit(struct mixer_build *state, int unitid, unsig channels = (ftr[0] - 7) / csize - 1; master_bits = snd_usb_combine_bytes(ftr + 6, csize); + /* master configuration quirks */ + switch (state->chip->usb_id) { + case USB_ID(0x08bb, 0x2702): + snd_printk(KERN_INFO + "usbmixer: master volume quirk for PCM2702 chip\n"); + /* disable non-functional volume control */ + master_bits &= ~(1 << (USB_FEATURE_VOLUME - 1)); + break; + } if (channels > 0) first_ch_bits = snd_usb_combine_bytes(ftr + 6 + csize, csize); else -- GitLab From 12929baea4b29d70525f764034b3dac771dd69e5 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 17 Nov 2009 15:58:35 +0100 Subject: [PATCH 0900/1165] ALSA: hda - Fix quirk for VAIO type G Vaio type G laptop doesn't work with the current quirk setup. After some tests, it turned out that it should be model=auto as default. Reported-by: Mattia Dongili Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 84a52efdb2d..70583719282 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11462,6 +11462,7 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */ SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06), SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO), + SND_PCI_QUIRK(0x104d, 0x9047, "Sony VAIO Type G", ALC262_AUTO), SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1", -- GitLab From 8ec6dba2581754e375be66f7bedd708d856d8b30 Mon Sep 17 00:00:00 2001 From: Jan Rekorajski Date: Mon, 16 Nov 2009 11:57:02 +0000 Subject: [PATCH 0901/1165] XFS bug in log recover with quota (bugzilla id 855) Hi, I was hit by a bug in linux 2.6.31 when XFS is not able to recover the log after a crash if fs was mounted with quotas. Gory details in XFS bugzilla: http://oss.sgi.com/bugzilla/show_bug.cgi?id=855. It looks like wrong struct is used in buffer length check, and the following patch should fix the problem. xfs_dqblk_t has a size of 104+32 bytes, while xfs_disk_dquot_t is 104 bytes long, and this is exactly what I see in system logs - "XFS: dquot too small (104) in xlog_recover_do_dquot_trans." Signed-off-by: Jan Rekorajski Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/xfs_log_recover.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/xfs/xfs_log_recover.c b/fs/xfs/xfs_log_recover.c index 1099395d7d6..fb17f8226b0 100644 --- a/fs/xfs/xfs_log_recover.c +++ b/fs/xfs/xfs_log_recover.c @@ -1980,7 +1980,7 @@ xlog_recover_do_reg_buffer( "XFS: NULL dquot in %s.", __func__); goto next; } - if (item->ri_buf[i].i_len < sizeof(xfs_dqblk_t)) { + if (item->ri_buf[i].i_len < sizeof(xfs_disk_dquot_t)) { cmn_err(CE_ALERT, "XFS: dquot too small (%d) in %s.", item->ri_buf[i].i_len, __func__); @@ -2635,7 +2635,7 @@ xlog_recover_do_dquot_trans( "XFS: NULL dquot in %s.", __func__); return XFS_ERROR(EIO); } - if (item->ri_buf[1].i_len < sizeof(xfs_dqblk_t)) { + if (item->ri_buf[1].i_len < sizeof(xfs_disk_dquot_t)) { cmn_err(CE_ALERT, "XFS: dquot too small (%d) in %s.", item->ri_buf[1].i_len, __func__); -- GitLab From 6c06f072c2d797ddbb2270363de97c53ebbe0385 Mon Sep 17 00:00:00 2001 From: "Nathaniel W. Turner" Date: Mon, 16 Nov 2009 19:51:48 +0000 Subject: [PATCH 0902/1165] xfs: copy li_lsn before dropping AIL lock Access to log items on the AIL is generally protected by m_ail_lock; this is particularly needed when we're getting or setting the 64-bit li_lsn on a 32-bit platform. This patch fixes a couple places where we were accessing the log item after dropping the AIL lock on 32-bit machines. This can result in a partially-zeroed log->l_tail_lsn if xfs_trans_ail_delete is racing with xfs_trans_ail_update, and in at least some cases, this can leave the l_tail_lsn with a zero cycle number, which means xlog_space_left will think the log is full (unless CONFIG_XFS_DEBUG is set, in which case we'll trip an ASSERT), leading to processes stuck forever in xlog_grant_log_space. Thanks to Adrian VanderSpek for first spotting the race potential and to Dave Chinner for debug assistance. Signed-off-by: Nathaniel W. Turner Reviewed-by: Christoph Hellwig Signed-off-by: Alex Elder --- fs/xfs/xfs_trans_ail.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/fs/xfs/xfs_trans_ail.c b/fs/xfs/xfs_trans_ail.c index f31271c30de..2ffc570679b 100644 --- a/fs/xfs/xfs_trans_ail.c +++ b/fs/xfs/xfs_trans_ail.c @@ -467,6 +467,7 @@ xfs_trans_ail_update( { xfs_log_item_t *dlip = NULL; xfs_log_item_t *mlip; /* ptr to minimum lip */ + xfs_lsn_t tail_lsn; mlip = xfs_ail_min(ailp); @@ -483,8 +484,16 @@ xfs_trans_ail_update( if (mlip == dlip) { mlip = xfs_ail_min(ailp); + /* + * It is not safe to access mlip after the AIL lock is + * dropped, so we must get a copy of li_lsn before we do + * so. This is especially important on 32-bit platforms + * where accessing and updating 64-bit values like li_lsn + * is not atomic. + */ + tail_lsn = mlip->li_lsn; spin_unlock(&ailp->xa_lock); - xfs_log_move_tail(ailp->xa_mount, mlip->li_lsn); + xfs_log_move_tail(ailp->xa_mount, tail_lsn); } else { spin_unlock(&ailp->xa_lock); } @@ -514,6 +523,7 @@ xfs_trans_ail_delete( { xfs_log_item_t *dlip; xfs_log_item_t *mlip; + xfs_lsn_t tail_lsn; if (lip->li_flags & XFS_LI_IN_AIL) { mlip = xfs_ail_min(ailp); @@ -527,9 +537,16 @@ xfs_trans_ail_delete( if (mlip == dlip) { mlip = xfs_ail_min(ailp); + /* + * It is not safe to access mlip after the AIL lock + * is dropped, so we must get a copy of li_lsn + * before we do so. This is especially important + * on 32-bit platforms where accessing and updating + * 64-bit values like li_lsn is not atomic. + */ + tail_lsn = mlip ? mlip->li_lsn : 0; spin_unlock(&ailp->xa_lock); - xfs_log_move_tail(ailp->xa_mount, - (mlip ? mlip->li_lsn : 0)); + xfs_log_move_tail(ailp->xa_mount, tail_lsn); } else { spin_unlock(&ailp->xa_lock); } -- GitLab From a08e37f31aa2800e0c9d20e1fc9283a06901cac2 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Sat, 14 Nov 2009 20:45:06 +1100 Subject: [PATCH 0903/1165] fcntl: Use consistent values for F_[GS]ETOWN_EX These values were only introduced during this release cycle, so it is still early enough to get them right. alpha uses the same values that are in asm-generic/fcntl.h, so just remove them. parisc uses the values interchanged for no apparent reason, so remove them to give us consistency across all architectures. Signed-off-by: Stephen Rothwell Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/fcntl.h | 2 -- arch/parisc/include/asm/fcntl.h | 2 -- 2 files changed, 4 deletions(-) diff --git a/arch/alpha/include/asm/fcntl.h b/arch/alpha/include/asm/fcntl.h index 73126e4dd63..25da0017ec8 100644 --- a/arch/alpha/include/asm/fcntl.h +++ b/arch/alpha/include/asm/fcntl.h @@ -26,8 +26,6 @@ #define F_GETOWN 6 /* for sockets. */ #define F_SETSIG 10 /* for sockets. */ #define F_GETSIG 11 /* for sockets. */ -#define F_SETOWN_EX 15 -#define F_GETOWN_EX 16 /* for posix fcntl() and lockf() */ #define F_RDLCK 1 diff --git a/arch/parisc/include/asm/fcntl.h b/arch/parisc/include/asm/fcntl.h index 5f39d5597ce..1e1c824764e 100644 --- a/arch/parisc/include/asm/fcntl.h +++ b/arch/parisc/include/asm/fcntl.h @@ -28,8 +28,6 @@ #define F_SETOWN 12 /* for sockets. */ #define F_SETSIG 13 /* for sockets. */ #define F_GETSIG 14 /* for sockets. */ -#define F_GETOWN_EX 15 -#define F_SETOWN_EX 16 /* for posix fcntl() and lockf() */ #define F_RDLCK 01 -- GitLab From e22dde9904c2d26a522f1a2b89854a8238bf0933 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 17 Nov 2009 11:34:31 -0700 Subject: [PATCH 0904/1165] ioat: silence "dca disabled" messages Turning off dca is not an "error", and the dca-enabled state can be viewed from sysfs. Signed-off-by: Dan Williams --- drivers/dma/ioat/dca.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat/dca.c b/drivers/dma/ioat/dca.c index 69d02615c4d..14f0a782df4 100644 --- a/drivers/dma/ioat/dca.c +++ b/drivers/dma/ioat/dca.c @@ -98,7 +98,7 @@ static int dca_enabled_in_bios(struct pci_dev *pdev) cpuid_level_9 = cpuid_eax(9); res = test_bit(0, &cpuid_level_9); if (!res) - dev_err(&pdev->dev, "DCA is disabled in BIOS\n"); + dev_dbg(&pdev->dev, "DCA is disabled in BIOS\n"); return res; } @@ -108,7 +108,7 @@ static int system_has_dca_enabled(struct pci_dev *pdev) if (boot_cpu_has(X86_FEATURE_DCA)) return dca_enabled_in_bios(pdev); - dev_err(&pdev->dev, "boot cpu doesn't have X86_FEATURE_DCA\n"); + dev_dbg(&pdev->dev, "boot cpu doesn't have X86_FEATURE_DCA\n"); return 0; } -- GitLab From 9346f48b26a4b48a7d56314bbb94e6b801e28316 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Mon, 16 Nov 2009 13:36:53 +0000 Subject: [PATCH 0905/1165] omap3: clock: Fix the DPLL freqsel computations Fix the freqsel value computation. Use n instead of (n+1) The formula in the TRM uses a zero-based N, hence the (n+1); however at this point in the clock34xx.c code, N is one-based. Hayati Bayrakdar and Nishanth Menon helped track down this bug. Signed-off-by: Rajendra Nayak Signed-off-by: Paul Walmsley [paul@pwsan.com: modified commit message] Cc: Hayati Bayrakdar Cc: Nishanth Menon Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock34xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index 489556eecbd..7c5c00df3c7 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -473,7 +473,7 @@ static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) unsigned long fint; u16 f = 0; - fint = clk->dpll_data->clk_ref->rate / (n + 1); + fint = clk->dpll_data->clk_ref->rate / n; pr_debug("clock: fint is %lu\n", fint); -- GitLab From 72f962fc7bc00f5ff4991912b889f87b464f7f1a Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 16 Nov 2009 13:36:54 +0000 Subject: [PATCH 0906/1165] omap3: clock: Fixed dpll3_m2x2 rate calculation Current calculation does not take into account any changes to M2 divisor, and thus when we change VDD2 OPP, dpll3_m2x2 rate does not change. Fixed by re-routing dpll3_m2x2 parent to dpll3_m2. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock34xx.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index c8119781e00..9565c05bebd 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -489,9 +489,9 @@ static struct clk core_ck = { static struct clk dpll3_m2x2_ck = { .name = "dpll3_m2x2_ck", .ops = &clkops_null, - .parent = &dpll3_x2_ck, + .parent = &dpll3_m2_ck, .clkdm_name = "dpll3_clkdm", - .recalc = &followparent_recalc, + .recalc = &omap3_clkoutx2_recalc, }; /* The PWRDN bit is apparently only available on 3430ES2 and above */ -- GitLab From 4175f3e31cc7157669aa66d46dc79de6ae0126ce Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 28 Oct 2009 21:12:32 +0100 Subject: [PATCH 0907/1165] tty_port: If we are opened non blocking we still need to raise the carrier Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 The tty_port code inherited a bug common to various drivers it was based upon. If the tty is opened O_NONBLOCK we do not wait for the carrier to be raised but we must still raise our modem lines if appropriate. (There is a second question here about whether we should do so if CLOCAL is set but that can wait) Signed-off-by: Alan Cox Reported-by: Karl Hiramoto Tested-by: Karl Hiramoto Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index a4bbb28f10b..2e8552dc5ed 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -221,6 +221,9 @@ int tty_port_block_til_ready(struct tty_port *port, the port has just hung up or is in another error state */ if ((filp->f_flags & O_NONBLOCK) || (tty->flags & (1 << TTY_IO_ERROR))) { + /* Indicate we are open */ + if (tty->termios->c_cflag & CBAUD) + tty_port_raise_dtr_rts(port); port->flags |= ASYNC_NORMAL_ACTIVE; return 0; } -- GitLab From d94c7bd4c1361cab58a21d530078c5673863dcc2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 28 Oct 2009 21:12:33 +0100 Subject: [PATCH 0908/1165] tty: cp210x: Fix carrier handling Original discussion: http://thread.gmane.org/gmane.linux.usb.general/23217/focus=23248 or http://marc.info/?l=linux-usb&m=125553790714133&w=2 9a68e39d4a701fb3be03cae9b462408664ebd205 broke carrier handling so that a cp210x setup which needed the carrier lines set up (non CLOCAL) which did not make a call which set the termios bits left the lines down even if CLOCAL was not asserted. Fix this not by reverting but by adding the proper dtr_rts and carrier_raised methods. This both sets the modem lines properly and also implements the correct blocking semantics for the port as required by POSIX. Signed-off-by: Alan Cox Reported-by: Karl Hiramoto Tested-by: Karl Hiramoto Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 698252a4dc5..bd254ec97d1 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -50,6 +50,8 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *, static void cp210x_break_ctl(struct tty_struct *, int); static int cp210x_startup(struct usb_serial *); static void cp210x_disconnect(struct usb_serial *); +static void cp210x_dtr_rts(struct usb_serial_port *p, int on); +static int cp210x_carrier_raised(struct usb_serial_port *p); static int debug; @@ -143,6 +145,8 @@ static struct usb_serial_driver cp210x_device = { .tiocmset = cp210x_tiocmset, .attach = cp210x_startup, .disconnect = cp210x_disconnect, + .dtr_rts = cp210x_dtr_rts, + .carrier_raised = cp210x_carrier_raised }; /* Config request types */ @@ -746,6 +750,14 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port, struct file *file, return cp210x_set_config(port, CP210X_SET_MHS, &control, 2); } +static void cp210x_dtr_rts(struct usb_serial_port *p, int on) +{ + if (on) + cp210x_tiocmset_port(p, NULL, TIOCM_DTR|TIOCM_RTS, 0); + else + cp210x_tiocmset_port(p, NULL, 0, TIOCM_DTR|TIOCM_RTS); +} + static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) { struct usb_serial_port *port = tty->driver_data; @@ -768,6 +780,15 @@ static int cp210x_tiocmget (struct tty_struct *tty, struct file *file) return result; } +static int cp210x_carrier_raised(struct usb_serial_port *p) +{ + unsigned int control; + cp210x_get_config(p, CP210X_GET_MDMSTS, &control, 1); + if (control & CONTROL_DCD) + return 1; + return 0; +} + static void cp210x_break_ctl (struct tty_struct *tty, int break_state) { struct usb_serial_port *port = tty->driver_data; -- GitLab From a1f17a872bc7b1cb7efdd5486a2963e88a536e61 Mon Sep 17 00:00:00 2001 From: Libin Yang Date: Wed, 4 Nov 2009 14:55:18 +0800 Subject: [PATCH 0909/1165] USB: ohci: quirk AMD prefetch for USB 1.1 ISO transfer The following patch in the driver is required to avoid USB 1.1 device failures that may occur due to requests from USB OHCI controllers may be overwritten if the latency for any pending request by the USB controller is very long (in the range of milliseconds). Signed-off-by: Libin Yang Cc: David Brownell Cc: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 5 +++++ drivers/usb/host/ohci-pci.c | 20 ++++++++++++++++++++ drivers/usb/host/ohci-q.c | 18 ++++++++++++------ drivers/usb/host/ohci.h | 9 +++++++++ 4 files changed, 46 insertions(+), 6 deletions(-) diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 78bb7710f36..24eb7478191 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -87,6 +87,7 @@ static int ohci_restart (struct ohci_hcd *ohci); #ifdef CONFIG_PCI static void quirk_amd_pll(int state); static void amd_iso_dev_put(void); +static void sb800_prefetch(struct ohci_hcd *ohci, int on); #else static inline void quirk_amd_pll(int state) { @@ -96,6 +97,10 @@ static inline void amd_iso_dev_put(void) { return; } +static inline void sb800_prefetch(struct ohci_hcd *ohci, int on) +{ + return; +} #endif diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index d2ba04dd785..b8a1148f248 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -177,6 +177,13 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) return 0; pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + + /* SB800 needs pre-fetch fix */ + if ((rev >= 0x40) && (rev <= 0x4f)) { + ohci->flags |= OHCI_QUIRK_AMD_PREFETCH; + ohci_dbg(ohci, "enabled AMD prefetch quirk\n"); + } + if ((rev > 0x3b) || (rev < 0x30)) { pci_dev_put(amd_smbus_dev); amd_smbus_dev = NULL; @@ -262,6 +269,19 @@ static void amd_iso_dev_put(void) } +static void sb800_prefetch(struct ohci_hcd *ohci, int on) +{ + struct pci_dev *pdev; + u16 misc; + + pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller); + pci_read_config_word(pdev, 0x50, &misc); + if (on == 0) + pci_write_config_word(pdev, 0x50, misc & 0xfcff); + else + pci_write_config_word(pdev, 0x50, misc | 0x0300); +} + /* List of quirks for OHCI */ static const struct pci_device_id ohci_pci_quirks[] = { { diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index 16fecb8ecc3..35288bcae0d 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -49,9 +49,12 @@ __acquires(ohci->lock) switch (usb_pipetype (urb->pipe)) { case PIPE_ISOCHRONOUS: ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--; - if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0 - && quirk_amdiso(ohci)) - quirk_amd_pll(1); + if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) { + if (quirk_amdiso(ohci)) + quirk_amd_pll(1); + if (quirk_amdprefetch(ohci)) + sb800_prefetch(ohci, 0); + } break; case PIPE_INTERRUPT: ohci_to_hcd(ohci)->self.bandwidth_int_reqs--; @@ -680,9 +683,12 @@ static void td_submit_urb ( data + urb->iso_frame_desc [cnt].offset, urb->iso_frame_desc [cnt].length, urb, cnt); } - if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0 - && quirk_amdiso(ohci)) - quirk_amd_pll(0); + if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) { + if (quirk_amdiso(ohci)) + quirk_amd_pll(0); + if (quirk_amdprefetch(ohci)) + sb800_prefetch(ohci, 1); + } periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0 && ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0; break; diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 222011f6172..5bf15fed0d9 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -402,6 +402,7 @@ struct ohci_hcd { #define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */ #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ #define OHCI_QUIRK_AMD_ISO 0x200 /* ISO transfers*/ +#define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ @@ -433,6 +434,10 @@ static inline int quirk_amdiso(struct ohci_hcd *ohci) { return ohci->flags & OHCI_QUIRK_AMD_ISO; } +static inline int quirk_amdprefetch(struct ohci_hcd *ohci) +{ + return ohci->flags & OHCI_QUIRK_AMD_PREFETCH; +} #else static inline int quirk_nec(struct ohci_hcd *ohci) { @@ -446,6 +451,10 @@ static inline int quirk_amdiso(struct ohci_hcd *ohci) { return 0; } +static inline int quirk_amdprefetch(struct ohci_hcd *ohci) +{ + return 0; +} #endif /* convert between an hcd pointer and the corresponding ohci_hcd */ -- GitLab From 18a77b5d237a67d2c621a46f5271a3b51da1b380 Mon Sep 17 00:00:00 2001 From: Henry Gebhardt Date: Wed, 4 Nov 2009 11:19:28 +0100 Subject: [PATCH 0910/1165] USB: cdc_acm: Fix race condition when opening tty If acm_rx_tasklet() gets called before tty_port_block_til_ready() returns, then bulk IN urbs may not be sent. This fixes it. Signed-off-by: Henry Gebhardt Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e3861b21e77..b72fa49eb25 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -609,9 +609,9 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp) acm->throttle = 0; - tasklet_schedule(&acm->urb_task); set_bit(ASYNCB_INITIALIZED, &acm->port.flags); rv = tty_port_block_til_ready(&acm->port, tty, filp); + tasklet_schedule(&acm->urb_task); done: mutex_unlock(&acm->mutex); err_out: -- GitLab From 051522bb47797f7168a617a0752d7ddc1a2f6f24 Mon Sep 17 00:00:00 2001 From: Francesco Lavra Date: Tue, 3 Nov 2009 10:53:07 +0000 Subject: [PATCH 0911/1165] USB: cdc_acm: Fix memory leak after hangup Am Donnerstag, 10. September 2009 15:43:53 schrieb Dietmar Hilbrich: > Hello, > > i have the following problem with the cdc-acm - driver: > > I'm using the driver with an "Ericsson F3507G" on a Thinkpad T400. > > If a disable the device (with the RFKill-Switch) while it is used by a > programm like ppp, the driver doesn't seem to correctly clean up the tty, > even after the program has been closed) > > The tty is still active (e.g. there still exists an entry in > /sys/dev/char/166:0 if ttyACM0 was used) and if a reacticate the device, > this device entry will be skipped and the Device-Nodes ttyACM1, ttyACM2 > and ttyACM3 will be used. > > This problem was introduced with the commit > 10077d4a6674f535abdbe25cdecb1202af7948f1 (before 2.6.31-rc1) and still > exists in 2.6.31. > > I was able the fix this problem with the following patch: > > diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c > index 2bfc41e..0970d2f 100644 > --- a/drivers/usb/class/cdc-acm.c > +++ b/drivers/usb/class/cdc-acm.c > @@ -676,6 +676,7 @@ static void acm_tty_hangup(struct tty_struct *tty) > struct acm *acm = tty->driver_data; > tty_port_hangup(&acm->port); > acm_port_down(acm, 0); > + acm_tty_unregister(acm); > } I have the same problem with cdc-acm (I'm using a Samsung SGH-U900): when I unplug it from the USB port during a PPP connection, the ppp daemon gets the hangup correctly (and closes the device), but the struct acm corresponding to the device disconnected is not freed. Hence reconnecting the device results in creation of /dev/ttyACM(x+1). The same happens when the system is hibernated during a PPP connection. This memory leak is due to the fact that when the tty is hung up, tty_port_close_start() returns always zero, and acm_tty_close() never reaches the point where acm_tty_unregister() is called. Here is a fix for this. Signed-off-by: Francesco Lavra Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index b72fa49eb25..e4eca7810bc 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -686,15 +686,21 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp) /* Perform the closing process and see if we need to do the hardware shutdown */ - if (!acm || tty_port_close_start(&acm->port, tty, filp) == 0) + if (!acm) + return; + if (tty_port_close_start(&acm->port, tty, filp) == 0) { + mutex_lock(&open_mutex); + if (!acm->dev) { + tty_port_tty_set(&acm->port, NULL); + acm_tty_unregister(acm); + tty->driver_data = NULL; + } + mutex_unlock(&open_mutex); return; + } acm_port_down(acm, 0); tty_port_close_end(&acm->port, tty); - mutex_lock(&open_mutex); tty_port_tty_set(&acm->port, NULL); - if (!acm->dev) - acm_tty_unregister(acm); - mutex_unlock(&open_mutex); } static int acm_tty_write(struct tty_struct *tty, -- GitLab From d94c05e33d9212ee67b8d4998f984cc71df8168b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 3 Nov 2009 22:02:22 -0800 Subject: [PATCH 0912/1165] USB: xhci: Fix bug memory free after failed initialization. If the xHCI driver fails during the memory initialization, xhci->ir_set may not be a valid pointer. Check that it points to valid DMA'able memory before writing to that address during the memory freeing process. Signed-off-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 1db4fea8c17..732580c6cbe 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -802,9 +802,11 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) int i; /* Free the Event Ring Segment Table and the actual Event Ring */ - xhci_writel(xhci, 0, &xhci->ir_set->erst_size); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); - xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); + if (xhci->ir_set) { + xhci_writel(xhci, 0, &xhci->ir_set->erst_size); + xhci_write_64(xhci, 0, &xhci->ir_set->erst_base); + xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue); + } size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); if (xhci->erst.entries) pci_free_consistent(pdev, size, -- GitLab From 2fa88daa6f299bfb83672c3b525d786ad03b4735 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 3 Nov 2009 22:02:24 -0800 Subject: [PATCH 0913/1165] USB: xhci: Fix TRB physical to virtual address translation. The trb_in_td() function in the xHCI driver is supposed to translate a physical transfer buffer request (TRB) into a virtual pointer to the ring segment that TRB is in. Unfortunately, a mistake in this function may cause endless loops as the driver searches through the linked list of ring segments over and over again. Fix a couple bugs that may lead to loops or bad output: 1. Bail out if we get a NULL pointer when translating the segment's private structure and the starting DMA address of the segment chunk. If this happens, we've been handed a starting TRB pointer from a different ring. 2. Make sure the function works when there's multiple segments in the ring. In the while loop to search through the ring segments, use the current segment variable (cur_seg), rather than the starting segment variable (start_seg) that is passed in. 3. Stop searching the ring if we've run through all the segments in the ring. Signed-off-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 173c39c7648..821b7b4709d 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -864,9 +864,11 @@ static struct xhci_segment *trb_in_td( cur_seg = start_seg; do { + if (start_dma == 0) + return 0; /* We may get an event for a Link TRB in the middle of a TD */ end_seg_dma = xhci_trb_virt_to_dma(cur_seg, - &start_seg->trbs[TRBS_PER_SEGMENT - 1]); + &cur_seg->trbs[TRBS_PER_SEGMENT - 1]); /* If the end TRB isn't in this segment, this is set to 0 */ end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb); @@ -893,8 +895,9 @@ static struct xhci_segment *trb_in_td( } cur_seg = cur_seg->next; start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]); - } while (1); + } while (cur_seg != start_seg); + return 0; } /* -- GitLab From 5294bea40666db5c5d6c336b8e4e55d69fa576ca Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 4 Nov 2009 11:22:19 -0800 Subject: [PATCH 0914/1165] USB: xhci: Fix scratchpad deallocation. The scratchpad_free() function uses xhci->page_size to free some memory with pci_free_consistent(). However, the page_size is set to zero before the call, causing kernel oopses on driver unload. Call scratchpad_free() before setting xhci->page_size to zero. Signed-off-by: Sarah Sharp Acked-by: John Youn Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 732580c6cbe..b8fd270a8b0 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -843,9 +843,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->dcbaa, xhci->dcbaa->dma); xhci->dcbaa = NULL; + scratchpad_free(xhci); xhci->page_size = 0; xhci->page_shift = 0; - scratchpad_free(xhci); } int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) -- GitLab From fca94748c5136ff390eadc443871b82f1f77dcd6 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 4 Nov 2009 11:35:53 -0500 Subject: [PATCH 0915/1165] USB: usbmon: fix bug in mon_buff_area_shrink This patch (as1299b) fixes a bug in an error-handling path of usbmon's binary interface. The storage area for URB data is divided into fixed-size blocks. If an URB's data can't be copied, the area reserved for it should be decreased to the size of the truncated information (rounded up to a block boundary). Rounding up the amount to be removed and subtracting it from the reserved size is definitely the wrong thing to do. Also, when the data for an isochronous URB can't be copied, we can still copy the isoc packet descriptors. In fact the current code does copy the descriptors, but then sets the capture length to 0 so they remain inaccessible. The capture length should be reduced to the length of the descriptors, not set to 0. Signed-off-by: Alan Stern Acked-by: Pete Zaitcev CC: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mon/mon_bin.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 9ed3e741bee..10f3205798e 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -348,12 +348,12 @@ static unsigned int mon_buff_area_alloc_contiguous(struct mon_reader_bin *rp, /* * Return a few (kilo-)bytes to the head of the buffer. - * This is used if a DMA fetch fails. + * This is used if a data fetch fails. */ static void mon_buff_area_shrink(struct mon_reader_bin *rp, unsigned int size) { - size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + /* size &= ~(PKT_ALIGN-1); -- we're called with aligned size */ rp->b_cnt -= size; if (rp->b_in < size) rp->b_in += rp->b_size; @@ -433,6 +433,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, unsigned int urb_length; unsigned int offset; unsigned int length; + unsigned int delta; unsigned int ndesc, lendesc; unsigned char dir; struct mon_bin_hdr *ep; @@ -537,8 +538,10 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, if (length != 0) { ep->flag_data = mon_bin_get_data(rp, offset, urb, length); if (ep->flag_data != 0) { /* Yes, it's 0x00, not '0' */ - ep->len_cap = 0; - mon_buff_area_shrink(rp, length); + delta = (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + ep->len_cap -= length; + delta -= (ep->len_cap + PKT_ALIGN-1) & ~(PKT_ALIGN-1); + mon_buff_area_shrink(rp, delta); } } else { ep->flag_data = data_tag; -- GitLab From ff854ce0b17161a86b5ae444c6cb0aa221720fab Mon Sep 17 00:00:00 2001 From: Zhang Le Date: Wed, 4 Nov 2009 23:22:59 +0800 Subject: [PATCH 0916/1165] USB: option.c: add support for D-Link DWM-162-U5 Add D-Link DWM-162-U5 device id 1e0e:ce16 into option driver. The device has 4 interfaces, of which 1 is handled by storage and the other 3 by option driver. The device appears first as CD-only 05c6:2100 device and must be switched to 1e0e:ce16 mode either by using "eject CD" or usb_modeswitch. The MessageContent for usb_modeswitch.conf is: "55534243e0c26a85000000000000061b000000020000000000000000000000" Signed-off-by: Zhang Le Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index cd44c68954d..319aaf9725b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -308,6 +308,7 @@ static int option_resume(struct usb_serial *serial); #define DLINK_VENDOR_ID 0x1186 #define DLINK_PRODUCT_DWM_652 0x3e04 +#define DLINK_PRODUCT_DWM_652_U5 0xce16 #define QISDA_VENDOR_ID 0x1da5 #define QISDA_PRODUCT_H21_4512 0x4512 @@ -586,6 +587,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, + { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) }, -- GitLab From b6b24c73d56a166a829318a1f06803ff9b54857b Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 17 Nov 2009 14:06:14 -0800 Subject: [PATCH 0917/1165] spi: error status should be negative Return a negative error value instead of a positive Signed-off-by: Roel Kluin Cc: David Brownell Cc: dmitry pervushin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/spi_stmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi_stmp.c b/drivers/spi/spi_stmp.c index d871dc23909..2552bb36400 100644 --- a/drivers/spi/spi_stmp.c +++ b/drivers/spi/spi_stmp.c @@ -242,7 +242,7 @@ static int stmp_spi_txrx_dma(struct stmp_spi *ss, int cs, wait_for_completion(&ss->done); if (!busy_wait(readl(ss->regs + HW_SSP_CTRL0) & BM_SSP_CTRL0_RUN)) - status = ETIMEDOUT; + status = -ETIMEDOUT; if (!dma_buf) dma_unmap_single(ss->master_dev, spi_buf_dma, len, dir); -- GitLab From dd04a6b32be5d4f2b8cfccd0a8369c5416d39d68 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 17 Nov 2009 14:06:15 -0800 Subject: [PATCH 0918/1165] drivers/video/da8xx-fb.c: fix error return The return should be negative on errors Signed-off-by: Roel Kluin Cc: Sudhakar Rajashekhara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/da8xx-fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index d065894ce38..035d56835b7 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -704,7 +704,7 @@ static int __init fb_probe(struct platform_device *device) if (i == ARRAY_SIZE(known_lcd_panels)) { dev_err(&device->dev, "GLCD: No valid panel found\n"); - ret = ENODEV; + ret = -ENODEV; goto err_clk_disable; } else dev_info(&device->dev, "GLCD: Found %s panel\n", -- GitLab From 410d7a979e0bc8386bf26316303809fa5688238c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 17 Nov 2009 14:06:15 -0800 Subject: [PATCH 0919/1165] MAINTAINERS: KMEMCHECK: add file patterns, use M: for Pekka's name and address Signed-off-by: Joe Perches Cc: Vegard Nossum Cc: Pekka Enberg Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 81d68d5b7ee..1ba4f98c9cb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3084,9 +3084,13 @@ F: kernel/kgdb.c KMEMCHECK M: Vegard Nossum -P Pekka Enberg -M: penberg@cs.helsinki.fi +M: Pekka Enberg S: Maintained +F: Documentation/kmemcheck.txt +F: arch/x86/include/asm/kmemcheck.h +F: arch/x86/mm/kmemcheck/ +F: include/linux/kmemcheck.h +F: mm/kmemcheck.c KMEMLEAK M: Catalin Marinas -- GitLab From e13193319d3a5545c82ed4b724bffd16f87873e3 Mon Sep 17 00:00:00 2001 From: Hidetoshi Seto Date: Tue, 17 Nov 2009 14:06:18 -0800 Subject: [PATCH 0920/1165] mm/memory_hotplug: fix section mismatch With CONFIG_MEMORY_HOTPLUG I got following warning: WARNING: vmlinux.o(.text+0x1276b0): Section mismatch in reference from the function hotadd_new_pgdat() to the function .meminit.text:free_area_init_node() The function hotadd_new_pgdat() references the function __meminit free_area_init_node(). This is often because hotadd_new_pgdat lacks a __meminit annotation or the annotation of free_area_init_node is wrong. Use __ref to fix this. Signed-off-by: Hidetoshi Seto Cc: Minchan Kim Cc: Mel Gorman Cc: Yasunori Goto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory_hotplug.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 821dee59637..380aef45c2c 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -447,7 +447,8 @@ int online_pages(unsigned long pfn, unsigned long nr_pages) } #endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */ -static pg_data_t *hotadd_new_pgdat(int nid, u64 start) +/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */ +static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start) { struct pglist_data *pgdat; unsigned long zones_size[MAX_NR_ZONES] = {0}; -- GitLab From 9398180097e359646d46083c3e079a54e20bee82 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Nov 2009 14:06:20 -0800 Subject: [PATCH 0921/1165] workqueue: fix race condition in schedule_on_each_cpu() Commit 65a64464349883891e21e74af16c05d6e1eeb4e9 ("HWPOISON: Allow schedule_on_each_cpu() from keventd") which allows schedule_on_each_cpu() to be called from keventd added a race condition. schedule_on_each_cpu() may race with cpu hotplug and end up executing the function twice on a cpu. Fix it by moving direct execution into the section protected with get/put_online_cpus(). While at it, update code such that direct execution is done after works have been scheduled for all other cpus and drop unnecessary cpu != orig test from flush loop. Signed-off-by: Tejun Heo Cc: Andi Kleen Acked-by: Oleg Nesterov Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/workqueue.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 12328147132..67e526b6ae8 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -692,31 +692,29 @@ int schedule_on_each_cpu(work_func_t func) if (!works) return -ENOMEM; + get_online_cpus(); + /* - * when running in keventd don't schedule a work item on itself. - * Can just call directly because the work queue is already bound. - * This also is faster. - * Make this a generic parameter for other workqueues? + * When running in keventd don't schedule a work item on + * itself. Can just call directly because the work queue is + * already bound. This also is faster. */ - if (current_is_keventd()) { + if (current_is_keventd()) orig = raw_smp_processor_id(); - INIT_WORK(per_cpu_ptr(works, orig), func); - func(per_cpu_ptr(works, orig)); - } - get_online_cpus(); for_each_online_cpu(cpu) { struct work_struct *work = per_cpu_ptr(works, cpu); - if (cpu == orig) - continue; INIT_WORK(work, func); - schedule_work_on(cpu, work); - } - for_each_online_cpu(cpu) { if (cpu != orig) - flush_work(per_cpu_ptr(works, cpu)); + schedule_work_on(cpu, work); } + if (orig >= 0) + func(per_cpu_ptr(works, orig)); + + for_each_online_cpu(cpu) + flush_work(per_cpu_ptr(works, cpu)); + put_online_cpus(); free_percpu(works); return 0; -- GitLab From 6ad696d2cf535772dff659298ec7e7260e344595 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 17 Nov 2009 14:06:22 -0800 Subject: [PATCH 0922/1165] mm: allow memory hotplug and hibernation in the same kernel Allow memory hotplug and hibernation in the same kernel Memory hotplug and hibernation were exclusive in Kconfig. This is obviously a problem for distribution kernels who want to support both in the same image. After some discussions with Rafael and others the only problem is with parallel memory hotadd or removal while a hibernation operation is in process. It was also working for s390 before. This patch removes the Kconfig level exclusion, and simply makes the memory add / remove functions grab the pm_mutex to exclude against hibernation. Fixes a regression - old kernels didn't exclude memory hotadd and hibernation. Signed-off-by: Andi Kleen Cc: Gerald Schaefer Cc: KOSAKI Motohiro Cc: Yasunori Goto Acked-by: Rafael J. Wysocki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/suspend.h | 21 +++++++++++++++++++-- mm/Kconfig | 5 +---- mm/memory_hotplug.c | 21 +++++++++++++++++---- 3 files changed, 37 insertions(+), 10 deletions(-) diff --git a/include/linux/suspend.h b/include/linux/suspend.h index cd15df6c63c..5e781d824e6 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -301,6 +301,8 @@ static inline int unregister_pm_notifier(struct notifier_block *nb) #define pm_notifier(fn, pri) do { (void)(fn); } while (0) #endif /* !CONFIG_PM_SLEEP */ +extern struct mutex pm_mutex; + #ifndef CONFIG_HIBERNATION static inline void register_nosave_region(unsigned long b, unsigned long e) { @@ -308,8 +310,23 @@ static inline void register_nosave_region(unsigned long b, unsigned long e) static inline void register_nosave_region_late(unsigned long b, unsigned long e) { } -#endif -extern struct mutex pm_mutex; +static inline void lock_system_sleep(void) {} +static inline void unlock_system_sleep(void) {} + +#else + +/* Let some subsystems like memory hotadd exclude hibernation */ + +static inline void lock_system_sleep(void) +{ + mutex_lock(&pm_mutex); +} + +static inline void unlock_system_sleep(void) +{ + mutex_unlock(&pm_mutex); +} +#endif #endif /* _LINUX_SUSPEND_H */ diff --git a/mm/Kconfig b/mm/Kconfig index fd3386242cf..44cf6f0a3a6 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -128,12 +128,9 @@ config SPARSEMEM_VMEMMAP config MEMORY_HOTPLUG bool "Allow for memory hot-add" depends on SPARSEMEM || X86_64_ACPI_NUMA - depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG + depends on HOTPLUG && ARCH_ENABLE_MEMORY_HOTPLUG depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390) -comment "Memory hotplug is currently incompatible with Software Suspend" - depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390 - config MEMORY_HOTPLUG_SPARSE def_bool y depends on SPARSEMEM && MEMORY_HOTPLUG diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 380aef45c2c..2047465cd27 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -26,6 +26,7 @@ #include #include #include +#include #include @@ -485,14 +486,18 @@ int __ref add_memory(int nid, u64 start, u64 size) struct resource *res; int ret; + lock_system_sleep(); + res = register_memory_resource(start, size); + ret = -EEXIST; if (!res) - return -EEXIST; + goto out; if (!node_online(nid)) { pgdat = hotadd_new_pgdat(nid, start); + ret = -ENOMEM; if (!pgdat) - return -ENOMEM; + goto out; new_pgdat = 1; } @@ -515,7 +520,8 @@ int __ref add_memory(int nid, u64 start, u64 size) BUG_ON(ret); } - return ret; + goto out; + error: /* rollback pgdat allocation and others */ if (new_pgdat) @@ -523,6 +529,8 @@ error: if (res) release_memory_resource(res); +out: + unlock_system_sleep(); return ret; } EXPORT_SYMBOL_GPL(add_memory); @@ -759,6 +767,8 @@ int offline_pages(unsigned long start_pfn, if (!test_pages_in_a_zone(start_pfn, end_pfn)) return -EINVAL; + lock_system_sleep(); + zone = page_zone(pfn_to_page(start_pfn)); node = zone_to_nid(zone); nr_pages = end_pfn - start_pfn; @@ -766,7 +776,7 @@ int offline_pages(unsigned long start_pfn, /* set above range as isolated */ ret = start_isolate_page_range(start_pfn, end_pfn); if (ret) - return ret; + goto out; arg.start_pfn = start_pfn; arg.nr_pages = nr_pages; @@ -844,6 +854,7 @@ repeat: writeback_set_ratelimit(); memory_notify(MEM_OFFLINE, &arg); + unlock_system_sleep(); return 0; failed_removal: @@ -853,6 +864,8 @@ failed_removal: /* pushback to free area */ undo_isolate_page_range(start_pfn, end_pfn); +out: + unlock_system_sleep(); return ret; } -- GitLab From 9ebd4eba761b624a6a6c9189335adeddcb1fa0e0 Mon Sep 17 00:00:00 2001 From: Stefani Seibold Date: Tue, 17 Nov 2009 14:06:23 -0800 Subject: [PATCH 0923/1165] procfs: fix /proc//stat stack pointer for kernel threads Fix a small issue for the stack pointer in /proc//stat. In case of a kernel thread the value of the printed stack pointer should be 0. Signed-off-by: Stefani Seibold Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/array.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/proc/array.c b/fs/proc/array.c index 07f77a7945c..822c2d50651 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -571,7 +571,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, rsslim, mm ? mm->start_code : 0, mm ? mm->end_code : 0, - (permitted) ? task->stack_start : 0, + (permitted && mm) ? task->stack_start : 0, esp, eip, /* The signal information here is obsolete. -- GitLab From 978b4053aefd422713f289f2a315ce2acba62018 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 17 Nov 2009 14:06:24 -0800 Subject: [PATCH 0924/1165] fcntl: rename F_OWNER_GID to F_OWNER_PGRP This is for consistency with various ioctl() operations that include the suffix "PGRP" in their names, and also for consistency with PRIO_PGRP, used with setpriority() and getpriority(). Also, using PGRP instead of GID avoids confusion with the common abbreviation of "group ID". I'm fine with anything that makes it more consistent, and if PGRP is what is the predominant abbreviation then I see no need to further confuse matters by adding a third one. Signed-off-by: Peter Zijlstra Acked-by: Michael Kerrisk Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/fcntl.c | 4 ++-- include/asm-generic/fcntl.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index fc089f2f7f5..2cf93ec40a6 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -284,7 +284,7 @@ static int f_setown_ex(struct file *filp, unsigned long arg) type = PIDTYPE_PID; break; - case F_OWNER_GID: + case F_OWNER_PGRP: type = PIDTYPE_PGID; break; @@ -321,7 +321,7 @@ static int f_getown_ex(struct file *filp, unsigned long arg) break; case PIDTYPE_PGID: - owner.type = F_OWNER_GID; + owner.type = F_OWNER_PGRP; break; default: diff --git a/include/asm-generic/fcntl.h b/include/asm-generic/fcntl.h index cd2d7896e34..495dc8af404 100644 --- a/include/asm-generic/fcntl.h +++ b/include/asm-generic/fcntl.h @@ -89,7 +89,7 @@ #define F_OWNER_TID 0 #define F_OWNER_PID 1 -#define F_OWNER_GID 2 +#define F_OWNER_PGRP 2 struct f_owner_ex { int type; -- GitLab From 648f15345add88a7eea724365fe1217a8d8a1e16 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 17 Nov 2009 22:50:45 +0000 Subject: [PATCH 0925/1165] sh: Fixup last users of irq_chip->typename The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: Thomas Gleixner Cc: linux-sh@vger.kernel.org Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/irq/imask.c | 2 +- arch/sh/kernel/cpu/irq/intc-sh5.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c index 6b5d191eec3..a351ed84eec 100644 --- a/arch/sh/kernel/cpu/irq/imask.c +++ b/arch/sh/kernel/cpu/irq/imask.c @@ -68,7 +68,7 @@ static void unmask_imask_irq(unsigned int irq) } static struct irq_chip imask_irq_chip = { - .typename = "SR.IMASK", + .name = "SR.IMASK", .mask = mask_imask_irq, .unmask = unmask_imask_irq, .mask_ack = mask_imask_irq, diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index 6c092f1f555..06e7e2959b5 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -85,7 +85,7 @@ static void mask_and_ack_intc(unsigned int); static void end_intc_irq(unsigned int irq); static struct irq_chip intc_irq_type = { - .typename = "INTC", + .name = "INTC", .startup = startup_intc_irq, .shutdown = shutdown_intc_irq, .enable = enable_intc_irq, -- GitLab From f7f3cad06080f14f60b1453af94463ff68ea2739 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Sat, 24 Oct 2009 17:25:38 +0200 Subject: [PATCH 0926/1165] [CPUFREQ] longhaul: select Longhaul version 2 for capable CPUs There is a typo in the longhaul detection code so only Longhaul v1 or Longhaul v3 is selected. The Longhaul v2 is not selected even for CPUs which are capable of. Tested on PCChips Giga Pro board. Frequency changes work and the Longhaul v2 detects that the board is not capable of changing CPU voltage. Signed-off-by: Krzysztof Helt Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/longhaul.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index ce2ed3e4aad..cabd2fa3fc9 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -813,7 +813,7 @@ static int __init longhaul_cpu_init(struct cpufreq_policy *policy) memcpy(eblcr, samuel2_eblcr, sizeof(samuel2_eblcr)); break; case 1 ... 15: - longhaul_version = TYPE_LONGHAUL_V1; + longhaul_version = TYPE_LONGHAUL_V2; if (c->x86_mask < 8) { cpu_model = CPU_SAMUEL2; cpuname = "C3 'Samuel 2' [C5B]"; -- GitLab From c53614ec17fe6296a696aa4ac71a799814bb50c1 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 6 Oct 2009 17:36:53 +0200 Subject: [PATCH 0927/1165] [CPUFREQ] powernow-k8: Fix test in get_transition_latency() Not makes it a bool before the comparison. Signed-off-by: Roel Kluin Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 6394aa5c798..3f12dabeab5 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1022,7 +1022,7 @@ static int get_transition_latency(struct powernow_k8_data *data) * set it to 1 to avoid problems in the future. * For all others it's a BIOS bug. */ - if (!boot_cpu_data.x86 == 0x11) + if (boot_cpu_data.x86 != 0x11) printk(KERN_ERR FW_WARN PFX "Invalid zero transition " "latency\n"); max_latency = 1; -- GitLab From 293afe44d75abce4252db76cbb303a7de4297ce1 Mon Sep 17 00:00:00 2001 From: John Villalovos Date: Fri, 25 Sep 2009 13:30:08 -0400 Subject: [PATCH 0928/1165] [CPUFREQ] acpi-cpufreq: blacklist Intel 0f68: Fix HT detection and put in notification message Removing the SMT/HT check, since the Errata doesn't mention Hyper-Threading. Adding in a printk, so that the user knows why acpi-cpufreq refuses to load. Also, once system is blacklisted, don't repeat checks to see if blacklisted. This also causes the message to only be printed once, rather than for each CPU. Signed-off-by: John L. Villalovos Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c | 23 ++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 7d5c3b0ea8d..8b581d3905c 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -526,15 +526,21 @@ static const struct dmi_system_id sw_any_bug_dmi_table[] = { static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c) { - /* http://www.intel.com/Assets/PDF/specupdate/314554.pdf + /* Intel Xeon Processor 7100 Series Specification Update + * http://www.intel.com/Assets/PDF/specupdate/314554.pdf * AL30: A Machine Check Exception (MCE) Occurring during an * Enhanced Intel SpeedStep Technology Ratio Change May Cause - * Both Processor Cores to Lock Up when HT is enabled*/ + * Both Processor Cores to Lock Up. */ if (c->x86_vendor == X86_VENDOR_INTEL) { if ((c->x86 == 15) && (c->x86_model == 6) && - (c->x86_mask == 8) && smt_capable()) + (c->x86_mask == 8)) { + printk(KERN_INFO "acpi-cpufreq: Intel(R) " + "Xeon(R) 7100 Errata AL30, processors may " + "lock up on frequency changes: disabling " + "acpi-cpufreq.\n"); return -ENODEV; + } } return 0; } @@ -549,13 +555,18 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy) unsigned int result = 0; struct cpuinfo_x86 *c = &cpu_data(policy->cpu); struct acpi_processor_performance *perf; +#ifdef CONFIG_SMP + static int blacklisted; +#endif dprintk("acpi_cpufreq_cpu_init\n"); #ifdef CONFIG_SMP - result = acpi_cpufreq_blacklist(c); - if (result) - return result; + if (blacklisted) + return blacklisted; + blacklisted = acpi_cpufreq_blacklist(c); + if (blacklisted) + return blacklisted; #endif data = kzalloc(sizeof(struct acpi_cpufreq_data), GFP_KERNEL); -- GitLab From e77b89f13a0d48aea70b69976e854f2a2444a519 Mon Sep 17 00:00:00 2001 From: Dmitry Monakhov Date: Mon, 5 Oct 2009 00:38:55 +0400 Subject: [PATCH 0929/1165] [CPUFREQ] Fix use after free on governor restore Currently on governer backup/restore path we storing governor's pointer. This is wrong because one may unload governor's module after cpu goes offline. As result use-after-free will take place on restored cpu. It is not easy to exploit this bug, but still we have to close this issue ASAP. Issue was introduced by following commit 084f34939424161669467c19280dbcf637730314 ##TESTCASE## #!/bin/sh -x modprobe acpi_cpufreq # Any non default governor, in may case it is "ondemand" modprobe cpufreq_ondemand echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor rmmod acpi_cpufreq rmmod cpufreq_ondemand modprobe acpi_cpufreq # << use-after-free here. Signed-off-by: Dmitry Monakhov Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 3938c781709..dab1410d1c0 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -41,7 +41,7 @@ static struct cpufreq_driver *cpufreq_driver; static DEFINE_PER_CPU(struct cpufreq_policy *, cpufreq_cpu_data); #ifdef CONFIG_HOTPLUG_CPU /* This one keeps track of the previously set governor of a removed CPU */ -static DEFINE_PER_CPU(struct cpufreq_governor *, cpufreq_cpu_governor); +static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor); #endif static DEFINE_SPINLOCK(cpufreq_driver_lock); @@ -774,10 +774,12 @@ int cpufreq_add_dev_policy(unsigned int cpu, struct cpufreq_policy *policy, #ifdef CONFIG_SMP unsigned long flags; unsigned int j; - #ifdef CONFIG_HOTPLUG_CPU - if (per_cpu(cpufreq_cpu_governor, cpu)) { - policy->governor = per_cpu(cpufreq_cpu_governor, cpu); + struct cpufreq_governor *gov; + + gov = __find_governor(per_cpu(cpufreq_cpu_governor, cpu)); + if (gov) { + policy->governor = gov; dprintk("Restoring governor %s for cpu %d\n", policy->governor->name, cpu); } @@ -1111,7 +1113,8 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) #ifdef CONFIG_SMP #ifdef CONFIG_HOTPLUG_CPU - per_cpu(cpufreq_cpu_governor, cpu) = data->governor; + strncpy(per_cpu(cpufreq_cpu_governor, cpu), data->governor->name, + CPUFREQ_NAME_LEN); #endif /* if we have other CPUs still registered, we need to unlink them, @@ -1135,7 +1138,8 @@ static int __cpufreq_remove_dev(struct sys_device *sys_dev) continue; dprintk("removing link for cpu %u\n", j); #ifdef CONFIG_HOTPLUG_CPU - per_cpu(cpufreq_cpu_governor, j) = data->governor; + strncpy(per_cpu(cpufreq_cpu_governor, j), + data->governor->name, CPUFREQ_NAME_LEN); #endif cpu_sys_dev = get_cpu_sysdev(j); sysfs_remove_link(&cpu_sys_dev->kobj, "cpufreq"); -- GitLab From 8dca15e40889e5d5e9655b03ba79c26200f760ce Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 2 Nov 2009 23:35:30 -0800 Subject: [PATCH 0930/1165] [CPUFREQ] speedstep-ich: fix error caused by 394122ab144dae4b276d74644a2f11c44a60ac5c "[CPUFREQ] cpumask: avoid playing with cpus_allowed in speedstep-ich.c" changed the code to mistakenly pass the current cpu as the "processor" argument of speedstep_get_frequency(), whereas it should be the type of the processor. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14340 Based on a patch by Dave Mueller. Signed-off-by: Rusty Russell Acked-by: Dominik Brodowski Reported-by: Dave Mueller Cc: Signed-off-by: Andrew Morton Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/speedstep-ich.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c index 6911e91fb4f..3ae5a7a3a50 100644 --- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c +++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c @@ -232,28 +232,23 @@ static unsigned int speedstep_detect_chipset(void) return 0; } -struct get_freq_data { - unsigned int speed; - unsigned int processor; -}; - -static void get_freq_data(void *_data) +static void get_freq_data(void *_speed) { - struct get_freq_data *data = _data; + unsigned int *speed = _speed; - data->speed = speedstep_get_frequency(data->processor); + *speed = speedstep_get_frequency(speedstep_processor); } static unsigned int speedstep_get(unsigned int cpu) { - struct get_freq_data data = { .processor = cpu }; + unsigned int speed; /* You're supposed to ensure CPU is online. */ - if (smp_call_function_single(cpu, get_freq_data, &data, 1) != 0) + if (smp_call_function_single(cpu, get_freq_data, &speed, 1) != 0) BUG(); - dprintk("detected %u kHz as current frequency\n", data.speed); - return data.speed; + dprintk("detected %u kHz as current frequency\n", speed); + return speed; } /** -- GitLab From 54c9a35d9faef06e00e2a941eb8fe674f1886901 Mon Sep 17 00:00:00 2001 From: "Pallipadi, Venkatesh" Date: Wed, 11 Nov 2009 16:50:29 -0800 Subject: [PATCH 0931/1165] [CPUFREQ] Resolve time unit thinko in ondemand/conservative govs ondemand and conservative governors are messing up time units in the code path where NO_HZ is not enabled and ignore_nice is set. The walltime idletime stored is in jiffies and nice time calculation is happening in microseconds. The problem was reported and diagnosed by Alexander here. http://marc.info/?l=linux-kernel&m=125752550404513&w=2 The patch below fixes this thinko. Reported-by: Alexander Miller Tested-by: Alexander Miller Signed-off-by: Venkatesh Pallipadi Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq_conservative.c | 4 ++-- drivers/cpufreq/cpufreq_ondemand.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c index bc33ddc9c97..c7b081b839f 100644 --- a/drivers/cpufreq/cpufreq_conservative.c +++ b/drivers/cpufreq/cpufreq_conservative.c @@ -116,9 +116,9 @@ static inline cputime64_t get_cpu_idle_time_jiffy(unsigned int cpu, idle_time = cputime64_sub(cur_wall_time, busy_time); if (wall) - *wall = cur_wall_time; + *wall = (cputime64_t)jiffies_to_usecs(cur_wall_time); - return idle_time; + return (cputime64_t)jiffies_to_usecs(idle_time);; } static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall) diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c index 071699de50e..4b34ade2332 100644 --- a/drivers/cpufreq/cpufreq_ondemand.c +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -133,9 +133,9 @@ static inline cputime64_t get_cpu_idle_time_jiffy(unsigned int cpu, idle_time = cputime64_sub(cur_wall_time, busy_time); if (wall) - *wall = cur_wall_time; + *wall = (cputime64_t)jiffies_to_usecs(cur_wall_time); - return idle_time; + return (cputime64_t)jiffies_to_usecs(idle_time); } static inline cputime64_t get_cpu_idle_time(unsigned int cpu, cputime64_t *wall) -- GitLab From 90e41bac100e34f955f48e7686c2fc685ac9aa30 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 12 Nov 2009 09:18:46 -0500 Subject: [PATCH 0932/1165] [CPUFREQ] Fix stale cpufreq_cpu_governor pointer Dave, Attached is an update of my patch against the cpufreq fixes branch. Before applying the patch I compiled and booted the tree to see if the panic was still there -- to my surprise it was not. This is because of the conversion of cpufreq_cpu_governor to a char[]. While the panic is kaput, the problem of stale data continues and my patch is still valid. It is possible to end up with the wrong governor after hotplug events because CPUFREQ_DEFAULT_GOVERNOR is statically linked to a default, while the cpu siblings may have had a different governor assigned by a user. ie) the patch is still needed in order to keep the governors assigned properly when hotplugging devices Signed-off-by: Prarit Bhargava Signed-off-by: Dave Jones --- drivers/cpufreq/cpufreq.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index dab1410d1c0..ff57c40e9b8 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -951,10 +951,13 @@ err_out_kobj_put: static int cpufreq_add_dev(struct sys_device *sys_dev) { unsigned int cpu = sys_dev->id; - int ret = 0; + int ret = 0, found = 0; struct cpufreq_policy *policy; unsigned long flags; unsigned int j; +#ifdef CONFIG_HOTPLUG_CPU + int sibling; +#endif if (cpu_is_offline(cpu)) return 0; @@ -1001,7 +1004,19 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) INIT_WORK(&policy->update, handle_update); /* Set governor before ->init, so that driver could check it */ - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; +#ifdef CONFIG_HOTPLUG_CPU + for_each_online_cpu(sibling) { + struct cpufreq_policy *cp = per_cpu(cpufreq_cpu_data, sibling); + if (cp && cp->governor && + (cpumask_test_cpu(cpu, cp->related_cpus))) { + policy->governor = cp->governor; + found = 1; + break; + } + } +#endif + if (!found) + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; /* call driver. From then on the cpufreq must be able * to accept all calls to ->verify and ->setpolicy for this CPU */ @@ -1610,9 +1625,22 @@ EXPORT_SYMBOL_GPL(cpufreq_register_governor); void cpufreq_unregister_governor(struct cpufreq_governor *governor) { +#ifdef CONFIG_HOTPLUG_CPU + int cpu; +#endif + if (!governor) return; +#ifdef CONFIG_HOTPLUG_CPU + for_each_present_cpu(cpu) { + if (cpu_online(cpu)) + continue; + if (!strcmp(per_cpu(cpufreq_cpu_governor, cpu), governor->name)) + strcpy(per_cpu(cpufreq_cpu_governor, cpu), "\0"); + } +#endif + mutex_lock(&cpufreq_governor_mutex); list_del(&governor->governor_list); mutex_unlock(&cpufreq_governor_mutex); -- GitLab From 4acc5a8eb42c3a5a7df570face5f03fb37fff349 Mon Sep 17 00:00:00 2001 From: Dave Mitchell Date: Tue, 17 Nov 2009 14:56:55 +0000 Subject: [PATCH 0933/1165] ibm_newemac: Fix EMACx_TRTR[TRT] bit shifts The TRT bit shifts were reversed for EMAC4 and non-EMAC4 during the port from ibm_emac to ibm_newemac. This patch corrects that error. Signed-off-by: Dave Mitchell Acked-by: Feng Kan Acked-by: Prodyut Hazarika Acked-by: Stefan Roese Signed-off-by: David S. Miller --- drivers/net/ibm_newemac/emac.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h index d34adf99fc6..8a61b597a16 100644 --- a/drivers/net/ibm_newemac/emac.h +++ b/drivers/net/ibm_newemac/emac.h @@ -263,8 +263,8 @@ struct emac_regs { /* EMACx_TRTR */ -#define EMAC_TRTR_SHIFT_EMAC4 27 -#define EMAC_TRTR_SHIFT 24 +#define EMAC_TRTR_SHIFT_EMAC4 24 +#define EMAC_TRTR_SHIFT 27 /* EMAC specific TX descriptor control fields (write access) */ #define EMAC_TX_CTRL_GFCS 0x0200 -- GitLab From 70e3bb504ccfe6ba725ab120bdb516d205d834f9 Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Tue, 17 Nov 2009 16:38:28 +0000 Subject: [PATCH 0934/1165] cxgb3: fix premature page unmap unmap Rx page only when guaranteed that this page won't be used anymore to allocate rx page chunks. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/sge.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index f86612857a7..6366061712f 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -879,7 +879,7 @@ recycle: pci_dma_sync_single_for_cpu(adap->pdev, dma_addr, len, PCI_DMA_FROMDEVICE); (*sd->pg_chunk.p_cnt)--; - if (!*sd->pg_chunk.p_cnt) + if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page) pci_unmap_page(adap->pdev, sd->pg_chunk.mapping, fl->alloc_size, @@ -2088,7 +2088,7 @@ static void lro_add_page(struct adapter *adap, struct sge_qset *qs, PCI_DMA_FROMDEVICE); (*sd->pg_chunk.p_cnt)--; - if (!*sd->pg_chunk.p_cnt) + if (!*sd->pg_chunk.p_cnt && sd->pg_chunk.page != fl->pg_chunk.page) pci_unmap_page(adap->pdev, sd->pg_chunk.mapping, fl->alloc_size, -- GitLab From bd6ddcb41d5fbdcbc1486f48d8023f234b4a7f8d Mon Sep 17 00:00:00 2001 From: Anuj Aggarwal Date: Tue, 17 Nov 2009 21:43:42 +0530 Subject: [PATCH 0935/1165] ASoC: Modifying the license string GPLv2 for OMAP3 EVM Correcting the license string from GPLv2 -> GPL v2. Found the problem while building OMAP3 ASoC driver as module. Signed-off-by: Anuj Aggarwal Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/omap/omap3evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/omap/omap3evm.c b/sound/soc/omap/omap3evm.c index 9114c263077..13aa380de16 100644 --- a/sound/soc/omap/omap3evm.c +++ b/sound/soc/omap/omap3evm.c @@ -144,4 +144,4 @@ module_exit(omap3evm_soc_exit); MODULE_AUTHOR("Anuj Aggarwal "); MODULE_DESCRIPTION("ALSA SoC OMAP3 EVM"); -MODULE_LICENSE("GPLv2"); +MODULE_LICENSE("GPL v2"); -- GitLab From f3dd70414cdc0203ca63eef83ca130c2d1903b30 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 7 Nov 2009 23:16:12 +0200 Subject: [PATCH 0936/1165] ASoC: OMAP3 Pandora: update for TWL4030 codec changes A while ago TWL4030 had it's playback stream name changed, but pandora needs it for it's playback path. Update to correct stream name so that playback works again. Also mark VIBRA output as not connected. Signed-off-by: Grazvydas Ignotas Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/omap/omap3pandora.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/omap/omap3pandora.c b/sound/soc/omap/omap3pandora.c index ad219aaf7cb..0cd06f5dd35 100644 --- a/sound/soc/omap/omap3pandora.c +++ b/sound/soc/omap/omap3pandora.c @@ -134,7 +134,7 @@ static int omap3pandora_hp_event(struct snd_soc_dapm_widget *w, * |P| <--- TWL4030 <--------- Line In and MICs */ static const struct snd_soc_dapm_widget omap3pandora_out_dapm_widgets[] = { - SND_SOC_DAPM_DAC("PCM DAC", "Playback", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_DAC("PCM DAC", "HiFi Playback", SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_PGA_E("Headphone Amplifier", SND_SOC_NOPM, 0, 0, NULL, 0, omap3pandora_hp_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), @@ -181,6 +181,7 @@ static int omap3pandora_out_init(struct snd_soc_codec *codec) snd_soc_dapm_nc_pin(codec, "CARKITR"); snd_soc_dapm_nc_pin(codec, "HFL"); snd_soc_dapm_nc_pin(codec, "HFR"); + snd_soc_dapm_nc_pin(codec, "VIBRA"); ret = snd_soc_dapm_new_controls(codec, omap3pandora_out_dapm_widgets, ARRAY_SIZE(omap3pandora_out_dapm_widgets)); -- GitLab From bab0212467e58929470ae3ae32515f17e30c3926 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Tue, 17 Nov 2009 13:51:01 -0700 Subject: [PATCH 0937/1165] ASoC: tlv320aic23 fix rate selection Fix the ordering of sr_valid_mask array. The lower bit of the index represents USB not bosr. Reported-by: Anuj Aggarwal Signed-off-by: Troy Kisky Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic23.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index 0b8dcb5cd72..6b24d8bb02b 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -265,8 +265,8 @@ static const int bosr_usb_divisor_table[] = { #define UPPER_GROUP ((1<<8) | (1<<9) | (1<<10) | (1<<11) | (1<<15)) static const unsigned short sr_valid_mask[] = { LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 0*/ - LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 1*/ LOWER_GROUP, /* Usb, bosr - 0*/ + LOWER_GROUP|UPPER_GROUP, /* Normal, bosr - 1*/ UPPER_GROUP, /* Usb, bosr - 1*/ }; /* -- GitLab From d32b20fc7dad87ac95fcc73fca3606c0db85f210 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 17 Nov 2009 14:39:03 -0800 Subject: [PATCH 0938/1165] omap: fix unlikely(x) < y The closing parenthesis was not in the right location. Signed-off-by: Roel Kluin Cc: Russell King Signed-off-by: Tony Lindgren Signed-off-by: Andrew Morton --- arch/arm/plat-omap/gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 71ebd7fcfea..7c345b757df 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -373,7 +373,7 @@ static inline int gpio_valid(int gpio) static int check_gpio(int gpio) { - if (unlikely(gpio_valid(gpio)) < 0) { + if (unlikely(gpio_valid(gpio) < 0)) { printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); dump_stack(); return -1; -- GitLab From e7fdc6052e78738ce90e0bdc051f2ddf60e41324 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 17 Nov 2009 14:39:06 -0800 Subject: [PATCH 0939/1165] OMAP: cs should be positive in gpmc_cs_free() The index `cs' is signed, test whether it is negative before we release gpmc_cs_mem[cs]. Signed-off-by: Roel Kluin Cc: Russell King Signed-off-by: Tony Lindgren Signed-off-by: Andrew Morton --- arch/arm/mach-omap2/gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index f8657568b1b..f3c992e2965 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -378,7 +378,7 @@ EXPORT_SYMBOL(gpmc_cs_request); void gpmc_cs_free(int cs) { spin_lock(&gpmc_mem_lock); - if (cs >= GPMC_CS_NUM || !gpmc_cs_reserved(cs)) { + if (cs >= GPMC_CS_NUM || cs < 0 || !gpmc_cs_reserved(cs)) { printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs); BUG(); spin_unlock(&gpmc_mem_lock); -- GitLab From 5ed1f321a71b8549cc2eea26c94fe7943ed01d31 Mon Sep 17 00:00:00 2001 From: Jay Fenlason Date: Tue, 17 Nov 2009 12:29:17 -0500 Subject: [PATCH 0940/1165] firewire: ohci: Make cycleMatch ISO transmission work Calling the START_ISO ioctl with a nonnegative cycle paramater has never worked. Last night I got around to figuring out why. Most of this patch is a big comment explaining why we enable an interrupt source then don't actually do anything when we get one. As the comment says, we should do more, but we don't have a way to tell userspace what happened. . . Signed-off-by: Jay Fenlason Signed-off-by: Stefan Richter (edited comment) --- drivers/firewire/ohci.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 5d524254499..c07cfada190 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -275,7 +275,7 @@ static void log_irqs(u32 evt) !(evt & OHCI1394_busReset)) return; - fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt, + fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt, evt & OHCI1394_selfIDComplete ? " selfID" : "", evt & OHCI1394_RQPkt ? " AR_req" : "", evt & OHCI1394_RSPkt ? " AR_resp" : "", @@ -286,6 +286,7 @@ static void log_irqs(u32 evt) evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "", evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "", evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "", + evt & OHCI1394_cycleInconsistent ? " cycleInconsistent" : "", evt & OHCI1394_regAccessFail ? " regAccessFail" : "", evt & OHCI1394_busReset ? " busReset" : "", evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt | @@ -293,6 +294,7 @@ static void log_irqs(u32 evt) OHCI1394_respTxComplete | OHCI1394_isochRx | OHCI1394_isochTx | OHCI1394_postedWriteErr | OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds | + OHCI1394_cycleInconsistent | OHCI1394_regAccessFail | OHCI1394_busReset) ? " ?" : ""); } @@ -1439,6 +1441,17 @@ static irqreturn_t irq_handler(int irq, void *data) OHCI1394_LinkControl_cycleMaster); } + if (unlikely(event & OHCI1394_cycleInconsistent)) { + /* + * We need to clear this event bit in order to make + * cycleMatch isochronous I/O work. In theory we should + * stop active cycleMatch iso contexts now and restart + * them at least two cycles later. (FIXME?) + */ + if (printk_ratelimit()) + fw_notify("isochronous cycle inconsistent\n"); + } + if (event & OHCI1394_cycle64Seconds) { cycle_time = reg_read(ohci, OHCI1394_IsochronousCycleTimer); if ((cycle_time & 0x80000000) == 0) @@ -1528,6 +1541,7 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) OHCI1394_reqTxComplete | OHCI1394_respTxComplete | OHCI1394_isochRx | OHCI1394_isochTx | OHCI1394_postedWriteErr | OHCI1394_cycleTooLong | + OHCI1394_cycleInconsistent | OHCI1394_cycle64Seconds | OHCI1394_regAccessFail | OHCI1394_masterIntEnable); if (param_debug & OHCI_PARAM_DEBUG_BUSRESETS) -- GitLab From c09c59e6a070d6af05f238f255aea268185273ef Mon Sep 17 00:00:00 2001 From: Mimi Zohar Date: Wed, 18 Nov 2009 16:16:06 -0500 Subject: [PATCH 0941/1165] ima: replace GFP_KERNEL with GFP_NOFS While running fsstress tests on the NFSv4 mounted ext3 and ext4 filesystem, the following call trace was generated on the nfs server machine. Replace GFP_KERNEL with GFP_NOFS in ima_iint_insert() to avoid a potential deadlock. ================================= [ INFO: inconsistent lock state ] 2.6.31-31.el6.x86_64 #1 --------------------------------- inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-W} usage. kswapd2/75 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: [] jbd2_journal_start+0xfe/0x13f {RECLAIM_FS-ON-W} state was registered at: [] mark_held_locks+0x65/0x99 [] lockdep_trace_alloc+0xbd/0xf5 [] kmem_cache_alloc+0x40/0x185 [] ima_iint_insert+0x3d/0xf1 [] ima_inode_alloc+0x25/0x44 [] inode_init_always+0xec/0x271 [] alloc_inode+0x51/0xa1 [] new_inode+0x2e/0x94 [] ext4_new_inode+0xb8/0xdc9 [] ext4_create+0xcf/0x175 [] vfs_create+0x82/0xb8 [] do_filp_open+0x32c/0x9ee [] do_sys_open+0x6c/0x12c [] sys_open+0x2e/0x44 [] system_call_fastpath+0x16/0x1b [] 0xffffffffffffffff irq event stamp: 90371 hardirqs last enabled at (90371): [] kmem_cache_alloc+0xf0/0x185 hardirqs last disabled at (90370): [] kmem_cache_alloc+0x89/0x185 softirqs last enabled at (89492): [] __do_softirq+0x1bf/0x1eb softirqs last disabled at (89477): [] call_softirq+0x1c/0x30 other info that might help us debug this: 2 locks held by kswapd2/75: #0: (shrinker_rwsem){++++..}, at: [] shrink_slab+0x44/0x177 #1: (&type->s_umount_key#25){++++..}, at: [] Reported-by: Muni P. Beerakam Reported-by: Amit K. Arora Cc: stable@kernel.org Signed-off-by: Mimi Zohar Signed-off-by: James Morris --- security/integrity/ima/ima_iint.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/ima_iint.c b/security/integrity/ima/ima_iint.c index b8dd693f879..a4e2b1dac94 100644 --- a/security/integrity/ima/ima_iint.c +++ b/security/integrity/ima/ima_iint.c @@ -58,11 +58,11 @@ struct ima_iint_cache *ima_iint_insert(struct inode *inode) if (!ima_initialized) return iint; - iint = kmem_cache_alloc(iint_cache, GFP_KERNEL); + iint = kmem_cache_alloc(iint_cache, GFP_NOFS); if (!iint) return iint; - rc = radix_tree_preload(GFP_KERNEL); + rc = radix_tree_preload(GFP_NOFS); if (rc < 0) goto out; -- GitLab From 8ade00824607fcfa8842572012d4393b40a74a94 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Nov 2009 17:15:06 +0100 Subject: [PATCH 0942/1165] mac80211: fix addba timer (again...) commit 2171abc58644e09dbba546d91366b12743115396 Author: Johannes Berg Date: Thu Oct 29 08:34:00 2009 +0100 mac80211: fix addba timer left a problem in there, even if the timer was never started it could be deleted and then added. Linus pointed out that del_timer_sync() isn't actually needed if we make the timer able to deal with no longer being needed when it gets queued _while_ we're in the locked section that also deletes it. For that the timer function only needs to check the HT_ADDBA_RECEIVED_MSK bit as well as the HT_ADDBA_REQUESTED_MSK bit, only if the former is clear should it do anything. Cc: Linus Torvalds Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/agg-tx.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index b09948ceec4..206fd82f0c7 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -173,12 +173,14 @@ static void sta_addba_resp_timer_expired(unsigned long data) /* check if the TID waits for addBA response */ spin_lock_bh(&sta->lock); - if (!(*state & HT_ADDBA_REQUESTED_MSK)) { + if ((*state & (HT_ADDBA_REQUESTED_MSK | HT_ADDBA_RECEIVED_MSK)) != + HT_ADDBA_REQUESTED_MSK) { spin_unlock_bh(&sta->lock); *state = HT_AGG_STATE_IDLE; #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "timer expired on tid %d but we are not " - "expecting addBA response there", tid); + "(or no longer) expecting addBA response there", + tid); #endif return; } @@ -666,21 +668,21 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, state = &sta->ampdu_mlme.tid_state_tx[tid]; - del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); - spin_lock_bh(&sta->lock); if (!(*state & HT_ADDBA_REQUESTED_MSK)) - goto timer_still_needed; + goto out; if (mgmt->u.action.u.addba_resp.dialog_token != sta->ampdu_mlme.tid_tx[tid]->dialog_token) { #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ - goto timer_still_needed; + goto out; } + del_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); + #ifdef CONFIG_MAC80211_HT_DEBUG printk(KERN_DEBUG "switched off addBA timer for tid %d \n", tid); #endif /* CONFIG_MAC80211_HT_DEBUG */ @@ -699,10 +701,6 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, ___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR); } - goto out; - - timer_still_needed: - add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer); out: spin_unlock_bh(&sta->lock); } -- GitLab From ec402ba97a6479dd80488b4404a73275e894289f Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Wed, 18 Nov 2009 10:22:46 +0000 Subject: [PATCH 0943/1165] agp/intel-agp: Set dma_mask for capable chipsets before agp_add_bridge() We should set this before calling agp_add_bridge() so that it's done before we map the scratch page too. This should probably fix the regression reported as k.o. bug #14627. Signed-off-by: David Woodhouse Signed-off-by: Dave Airlie --- drivers/char/agp/intel-agp.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 4068467ce7b..10e1f0390bb 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1161,12 +1161,6 @@ static int intel_i915_configure(void) intel_i9xx_setup_flush(); -#ifdef USE_PCI_DMA_API - if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36))) - dev_err(&intel_private.pcidev->dev, - "set gfx device dma mask 36bit failed!\n"); -#endif - return 0; } @@ -2456,6 +2450,11 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev, &bridge->mode); } + if (bridge->driver->mask_memory == intel_i965_mask_memory) + if (pci_set_dma_mask(intel_private.pcidev, DMA_BIT_MASK(36))) + dev_err(&intel_private.pcidev->dev, + "set gfx device dma mask 36bit failed!\n"); + pci_set_drvdata(pdev, bridge); return agp_add_bridge(bridge); } -- GitLab From a414f01ac2899f273ef8fe98fa44158ac12793f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 18 Nov 2009 22:31:52 +0100 Subject: [PATCH 0944/1165] strcmp: fix overflow and possibly signedness error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Doing the strcmp return value as signed char __res = *cs - *ct; is wrong for two reasons. The subtraction can overflow because __res doesn't use a type big enough. Moreover the compared bytes should be interpreted as unsigned char as specified by POSIX. The same problem is fixed in strncmp. Signed-off-by: Uwe Kleine-König Cc: Michael Buesch Cc: Andreas Schwab Cc: Andrew Morton Signed-off-by: Linus Torvalds --- lib/string.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/lib/string.c b/lib/string.c index b19b87af65a..e96421ab9a9 100644 --- a/lib/string.c +++ b/lib/string.c @@ -246,13 +246,17 @@ EXPORT_SYMBOL(strlcat); #undef strcmp int strcmp(const char *cs, const char *ct) { - signed char __res; + unsigned char c1, c2; while (1) { - if ((__res = *cs - *ct++) != 0 || !*cs++) + c1 = *cs++; + c2 = *ct++; + if (c1 != c2) + return c1 < c2 ? -1 : 1; + if (!c1) break; } - return __res; + return 0; } EXPORT_SYMBOL(strcmp); #endif @@ -266,14 +270,18 @@ EXPORT_SYMBOL(strcmp); */ int strncmp(const char *cs, const char *ct, size_t count) { - signed char __res = 0; + unsigned char c1, c2; while (count) { - if ((__res = *cs - *ct++) != 0 || !*cs++) + c1 = *cs++; + c2 = *ct++; + if (c1 != c2) + return c1 < c2 ? -1 : 1; + if (!c1) break; count--; } - return __res; + return 0; } EXPORT_SYMBOL(strncmp); #endif -- GitLab From ceb99fe071eb688255798d89be337affffa2b103 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 19 Nov 2009 14:29:39 +0100 Subject: [PATCH 0945/1165] mac80211: fix resume When mac80211 resumes, it currently first sets suspended to false so the driver can start doing things and we can receive frames. However, if we actually receive frames then it can end up starting some work which adds timers and then later runs into a BUG_ON in the timer code because it tries add_timer() on a pending timer. Fix this by keeping track of the resuming process by introducing a new variable 'resuming' which gets set to true early on instead of setting 'suspended' to false, and allow queueing work but not receiving frames while resuming. Reported-by: Maxim Levitsky Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ieee80211_i.h | 8 ++++++++ net/mac80211/util.c | 19 +++++++++---------- 2 files changed, 17 insertions(+), 10 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 588005c84a6..a910bf1f092 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -661,6 +661,14 @@ struct ieee80211_local { */ bool suspended; + /* + * Resuming is true while suspended, but when we're reprogramming the + * hardware -- at that time it's allowed to use ieee80211_queue_work() + * again even though some other parts of the stack are still suspended + * and we still drop received frames to avoid waking the stack. + */ + bool resuming; + /* * quiescing is true during the suspend process _only_ to * ease timer cancelling etc. diff --git a/net/mac80211/util.c b/net/mac80211/util.c index aeb65b3d229..e6c08da8da2 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -520,9 +520,9 @@ EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic); */ static bool ieee80211_can_queue_work(struct ieee80211_local *local) { - if (WARN(local->suspended, "queueing ieee80211 work while " - "going to suspend\n")) - return false; + if (WARN(local->suspended && !local->resuming, + "queueing ieee80211 work while going to suspend\n")) + return false; return true; } @@ -1025,13 +1025,9 @@ int ieee80211_reconfig(struct ieee80211_local *local) struct sta_info *sta; unsigned long flags; int res; - bool from_suspend = local->suspended; - /* - * We're going to start the hardware, at that point - * we are no longer suspended and can RX frames. - */ - local->suspended = false; + if (local->suspended) + local->resuming = true; /* restart hardware */ if (local->open_count) { @@ -1129,11 +1125,14 @@ int ieee80211_reconfig(struct ieee80211_local *local) * If this is for hw restart things are still running. * We may want to change that later, however. */ - if (!from_suspend) + if (!local->suspended) return 0; #ifdef CONFIG_PM + /* first set suspended false, then resuming */ local->suspended = false; + mb(); + local->resuming = false; list_for_each_entry(sdata, &local->interfaces, list) { switch(sdata->vif.type) { -- GitLab From 3d7a641e544e428191667e8b1f83f96fa46dbd65 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:10:23 +0000 Subject: [PATCH 0946/1165] SLOW_WORK: Wait for outstanding work items belonging to a module to clear Wait for outstanding slow work items belonging to a module to clear when unregistering that module as a user of the facility. This prevents the put_ref code of a work item from being taken away before it returns. Signed-off-by: David Howells --- Documentation/slow-work.txt | 13 +++- fs/fscache/main.c | 6 +- fs/fscache/object.c | 1 + fs/fscache/operation.c | 1 + fs/gfs2/main.c | 4 +- fs/gfs2/recovery.c | 1 + include/linux/slow-work.h | 8 ++- kernel/slow-work.c | 132 ++++++++++++++++++++++++++++++++++-- 8 files changed, 150 insertions(+), 16 deletions(-) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index ebc50f808ea..f12fda31dcd 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -64,9 +64,11 @@ USING SLOW WORK ITEMS Firstly, a module or subsystem wanting to make use of slow work items must register its interest: - int ret = slow_work_register_user(); + int ret = slow_work_register_user(struct module *module); -This will return 0 if successful, or a -ve error upon failure. +This will return 0 if successful, or a -ve error upon failure. The module +pointer should be the module interested in using this facility (almost +certainly THIS_MODULE). Slow work items may then be set up by: @@ -110,7 +112,12 @@ operation. When all a module's slow work items have been processed, and the module has no further interest in the facility, it should unregister its interest: - slow_work_unregister_user(); + slow_work_unregister_user(struct module *module); + +The module pointer is used to wait for all outstanding work items for that +module before completing the unregistration. This prevents the put_ref() code +from being taken away before it completes. module should almost certainly be +THIS_MODULE. =============== diff --git a/fs/fscache/main.c b/fs/fscache/main.c index 4de41b59749..add6bdb53f0 100644 --- a/fs/fscache/main.c +++ b/fs/fscache/main.c @@ -48,7 +48,7 @@ static int __init fscache_init(void) { int ret; - ret = slow_work_register_user(); + ret = slow_work_register_user(THIS_MODULE); if (ret < 0) goto error_slow_work; @@ -80,7 +80,7 @@ error_kobj: error_cookie_jar: fscache_proc_cleanup(); error_proc: - slow_work_unregister_user(); + slow_work_unregister_user(THIS_MODULE); error_slow_work: return ret; } @@ -97,7 +97,7 @@ static void __exit fscache_exit(void) kobject_put(fscache_root); kmem_cache_destroy(fscache_cookie_jar); fscache_proc_cleanup(); - slow_work_unregister_user(); + slow_work_unregister_user(THIS_MODULE); printk(KERN_NOTICE "FS-Cache: Unloaded\n"); } diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 392a41b1b79..d236eb1d6f3 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -45,6 +45,7 @@ static void fscache_enqueue_dependents(struct fscache_object *); static void fscache_dequeue_object(struct fscache_object *); const struct slow_work_ops fscache_object_slow_work_ops = { + .owner = THIS_MODULE, .get_ref = fscache_object_slow_work_get_ref, .put_ref = fscache_object_slow_work_put_ref, .execute = fscache_object_slow_work_execute, diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index e7f8d53b8b6..f1a2857b2ff 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -453,6 +453,7 @@ static void fscache_op_execute(struct slow_work *work) } const struct slow_work_ops fscache_op_slow_work_ops = { + .owner = THIS_MODULE, .get_ref = fscache_op_get_ref, .put_ref = fscache_op_put_ref, .execute = fscache_op_execute, diff --git a/fs/gfs2/main.c b/fs/gfs2/main.c index eacd78a5d08..5b31f7741a8 100644 --- a/fs/gfs2/main.c +++ b/fs/gfs2/main.c @@ -114,7 +114,7 @@ static int __init init_gfs2_fs(void) if (error) goto fail_unregister; - error = slow_work_register_user(); + error = slow_work_register_user(THIS_MODULE); if (error) goto fail_slow; @@ -163,7 +163,7 @@ static void __exit exit_gfs2_fs(void) gfs2_unregister_debugfs(); unregister_filesystem(&gfs2_fs_type); unregister_filesystem(&gfs2meta_fs_type); - slow_work_unregister_user(); + slow_work_unregister_user(THIS_MODULE); kmem_cache_destroy(gfs2_quotad_cachep); kmem_cache_destroy(gfs2_rgrpd_cachep); diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c index 59d2695509d..b2bb779f09e 100644 --- a/fs/gfs2/recovery.c +++ b/fs/gfs2/recovery.c @@ -593,6 +593,7 @@ fail: } struct slow_work_ops gfs2_recover_ops = { + .owner = THIS_MODULE, .get_ref = gfs2_recover_get_ref, .put_ref = gfs2_recover_put_ref, .execute = gfs2_recover_work, diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index b65c8881f07..9adb2b30754 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -24,6 +24,9 @@ struct slow_work; * The operations used to support slow work items */ struct slow_work_ops { + /* owner */ + struct module *owner; + /* get a ref on a work item * - return 0 if successful, -ve if not */ @@ -42,6 +45,7 @@ struct slow_work_ops { * queued */ struct slow_work { + struct module *owner; /* the owning module */ unsigned long flags; #define SLOW_WORK_PENDING 0 /* item pending (further) execution */ #define SLOW_WORK_EXECUTING 1 /* item currently executing */ @@ -84,8 +88,8 @@ static inline void vslow_work_init(struct slow_work *work, } extern int slow_work_enqueue(struct slow_work *work); -extern int slow_work_register_user(void); -extern void slow_work_unregister_user(void); +extern int slow_work_register_user(struct module *owner); +extern void slow_work_unregister_user(struct module *owner); #ifdef CONFIG_SYSCTL extern ctl_table slow_work_sysctls[]; diff --git a/kernel/slow-work.c b/kernel/slow-work.c index 0d31135efbf..dd08f376e40 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -22,6 +22,8 @@ #define SLOW_WORK_OOM_TIMEOUT (5 * HZ) /* can't start new threads for 5s after * OOM */ +#define SLOW_WORK_THREAD_LIMIT 255 /* abs maximum number of slow-work threads */ + static void slow_work_cull_timeout(unsigned long); static void slow_work_oom_timeout(unsigned long); @@ -46,7 +48,7 @@ static unsigned vslow_work_proportion = 50; /* % of threads that may process #ifdef CONFIG_SYSCTL static const int slow_work_min_min_threads = 2; -static int slow_work_max_max_threads = 255; +static int slow_work_max_max_threads = SLOW_WORK_THREAD_LIMIT; static const int slow_work_min_vslow = 1; static const int slow_work_max_vslow = 99; @@ -97,6 +99,23 @@ static DEFINE_TIMER(slow_work_cull_timer, slow_work_cull_timeout, 0, 0); static DEFINE_TIMER(slow_work_oom_timer, slow_work_oom_timeout, 0, 0); static struct slow_work slow_work_new_thread; /* new thread starter */ +/* + * slow work ID allocation (use slow_work_queue_lock) + */ +static DECLARE_BITMAP(slow_work_ids, SLOW_WORK_THREAD_LIMIT); + +/* + * Unregistration tracking to prevent put_ref() from disappearing during module + * unload + */ +#ifdef CONFIG_MODULES +static struct module *slow_work_thread_processing[SLOW_WORK_THREAD_LIMIT]; +static struct module *slow_work_unreg_module; +static struct slow_work *slow_work_unreg_work_item; +static DECLARE_WAIT_QUEUE_HEAD(slow_work_unreg_wq); +static DEFINE_MUTEX(slow_work_unreg_sync_lock); +#endif + /* * The queues of work items and the lock governing access to them. These are * shared between all the CPUs. It doesn't make sense to have per-CPU queues @@ -149,8 +168,11 @@ static unsigned slow_work_calc_vsmax(void) * Attempt to execute stuff queued on a slow thread. Return true if we managed * it, false if there was nothing to do. */ -static bool slow_work_execute(void) +static bool slow_work_execute(int id) { +#ifdef CONFIG_MODULES + struct module *module; +#endif struct slow_work *work = NULL; unsigned vsmax; bool very_slow; @@ -186,6 +208,12 @@ static bool slow_work_execute(void) } else { very_slow = false; /* avoid the compiler warning */ } + +#ifdef CONFIG_MODULES + if (work) + slow_work_thread_processing[id] = work->owner; +#endif + spin_unlock_irq(&slow_work_queue_lock); if (!work) @@ -219,7 +247,18 @@ static bool slow_work_execute(void) spin_unlock_irq(&slow_work_queue_lock); } + /* sort out the race between module unloading and put_ref() */ work->ops->put_ref(work); + +#ifdef CONFIG_MODULES + module = slow_work_thread_processing[id]; + slow_work_thread_processing[id] = NULL; + smp_mb(); + if (slow_work_unreg_work_item == work || + slow_work_unreg_module == module) + wake_up_all(&slow_work_unreg_wq); +#endif + return true; auto_requeue: @@ -232,6 +271,7 @@ auto_requeue: else list_add_tail(&work->link, &slow_work_queue); spin_unlock_irq(&slow_work_queue_lock); + slow_work_thread_processing[id] = NULL; return true; } @@ -368,13 +408,22 @@ static inline bool slow_work_available(int vsmax) */ static int slow_work_thread(void *_data) { - int vsmax; + int vsmax, id; DEFINE_WAIT(wait); set_freezable(); set_user_nice(current, -5); + /* allocate ourselves an ID */ + spin_lock_irq(&slow_work_queue_lock); + id = find_first_zero_bit(slow_work_ids, SLOW_WORK_THREAD_LIMIT); + BUG_ON(id < 0 || id >= SLOW_WORK_THREAD_LIMIT); + __set_bit(id, slow_work_ids); + spin_unlock_irq(&slow_work_queue_lock); + + sprintf(current->comm, "kslowd%03u", id); + for (;;) { vsmax = vslow_work_proportion; vsmax *= atomic_read(&slow_work_thread_count); @@ -395,7 +444,7 @@ static int slow_work_thread(void *_data) vsmax *= atomic_read(&slow_work_thread_count); vsmax /= 100; - if (slow_work_available(vsmax) && slow_work_execute()) { + if (slow_work_available(vsmax) && slow_work_execute(id)) { cond_resched(); if (list_empty(&slow_work_queue) && list_empty(&vslow_work_queue) && @@ -412,6 +461,10 @@ static int slow_work_thread(void *_data) break; } + spin_lock_irq(&slow_work_queue_lock); + __clear_bit(id, slow_work_ids); + spin_unlock_irq(&slow_work_queue_lock); + if (atomic_dec_and_test(&slow_work_thread_count)) complete_and_exit(&slow_work_last_thread_exited, 0); return 0; @@ -475,6 +528,7 @@ static void slow_work_new_thread_execute(struct slow_work *work) } static const struct slow_work_ops slow_work_new_thread_ops = { + .owner = THIS_MODULE, .get_ref = slow_work_new_thread_get_ref, .put_ref = slow_work_new_thread_put_ref, .execute = slow_work_new_thread_execute, @@ -546,12 +600,13 @@ static int slow_work_max_threads_sysctl(struct ctl_table *table, int write, /** * slow_work_register_user - Register a user of the facility + * @module: The module about to make use of the facility * * Register a user of the facility, starting up the initial threads if there * aren't any other users at this point. This will return 0 if successful, or * an error if not. */ -int slow_work_register_user(void) +int slow_work_register_user(struct module *module) { struct task_struct *p; int loop; @@ -598,14 +653,79 @@ error: } EXPORT_SYMBOL(slow_work_register_user); +/* + * wait for all outstanding items from the calling module to complete + * - note that more items may be queued whilst we're waiting + */ +static void slow_work_wait_for_items(struct module *module) +{ + DECLARE_WAITQUEUE(myself, current); + struct slow_work *work; + int loop; + + mutex_lock(&slow_work_unreg_sync_lock); + add_wait_queue(&slow_work_unreg_wq, &myself); + + for (;;) { + spin_lock_irq(&slow_work_queue_lock); + + /* first of all, we wait for the last queued item in each list + * to be processed */ + list_for_each_entry_reverse(work, &vslow_work_queue, link) { + if (work->owner == module) { + set_current_state(TASK_UNINTERRUPTIBLE); + slow_work_unreg_work_item = work; + goto do_wait; + } + } + list_for_each_entry_reverse(work, &slow_work_queue, link) { + if (work->owner == module) { + set_current_state(TASK_UNINTERRUPTIBLE); + slow_work_unreg_work_item = work; + goto do_wait; + } + } + + /* then we wait for the items being processed to finish */ + slow_work_unreg_module = module; + smp_mb(); + for (loop = 0; loop < SLOW_WORK_THREAD_LIMIT; loop++) { + if (slow_work_thread_processing[loop] == module) + goto do_wait; + } + spin_unlock_irq(&slow_work_queue_lock); + break; /* okay, we're done */ + + do_wait: + spin_unlock_irq(&slow_work_queue_lock); + schedule(); + slow_work_unreg_work_item = NULL; + slow_work_unreg_module = NULL; + } + + remove_wait_queue(&slow_work_unreg_wq, &myself); + mutex_unlock(&slow_work_unreg_sync_lock); +} + /** * slow_work_unregister_user - Unregister a user of the facility + * @module: The module whose items should be cleared * * Unregister a user of the facility, killing all the threads if this was the * last one. + * + * This waits for all the work items belonging to the nominated module to go + * away before proceeding. */ -void slow_work_unregister_user(void) +void slow_work_unregister_user(struct module *module) { + /* first of all, wait for all outstanding items from the calling module + * to complete */ + if (module) + slow_work_wait_for_items(module); + + /* then we can actually go about shutting down the facility if need + * be */ mutex_lock(&slow_work_user_lock); BUG_ON(slow_work_user_count <= 0); -- GitLab From 4d8bb2cbccf6dccaada509aafeb01c6205c9d8c4 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 19 Nov 2009 18:10:39 +0000 Subject: [PATCH 0947/1165] SLOW_WORK: Make slow_work_ops ->get_ref/->put_ref optional Make the ability for the slow-work facility to take references on a work item optional as not everyone requires this. Even the internal slow-work stubs them out, so those can be got rid of too. Signed-off-by: Jens Axboe Signed-off-by: David Howells --- Documentation/slow-work.txt | 2 +- kernel/slow-work.c | 36 ++++++++++++++++-------------------- 2 files changed, 17 insertions(+), 21 deletions(-) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index f12fda31dcd..c655c517fc6 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -125,7 +125,7 @@ ITEM OPERATIONS =============== Each work item requires a table of operations of type struct slow_work_ops. -All members are required: +Only ->execute() is required, getting and putting of a reference are optional. (*) Get a reference on an item: diff --git a/kernel/slow-work.c b/kernel/slow-work.c index dd08f376e40..fccf421eb5c 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -145,6 +145,20 @@ static DECLARE_COMPLETION(slow_work_last_thread_exited); static int slow_work_user_count; static DEFINE_MUTEX(slow_work_user_lock); +static inline int slow_work_get_ref(struct slow_work *work) +{ + if (work->ops->get_ref) + return work->ops->get_ref(work); + + return 0; +} + +static inline void slow_work_put_ref(struct slow_work *work) +{ + if (work->ops->put_ref) + work->ops->put_ref(work); +} + /* * Calculate the maximum number of active threads in the pool that are * permitted to process very slow work items. @@ -248,7 +262,7 @@ static bool slow_work_execute(int id) } /* sort out the race between module unloading and put_ref() */ - work->ops->put_ref(work); + slow_work_put_ref(work); #ifdef CONFIG_MODULES module = slow_work_thread_processing[id]; @@ -309,7 +323,6 @@ int slow_work_enqueue(struct slow_work *work) BUG_ON(slow_work_user_count <= 0); BUG_ON(!work); BUG_ON(!work->ops); - BUG_ON(!work->ops->get_ref); /* when honouring an enqueue request, we only promise that we will run * the work function in the future; we do not promise to run it once @@ -339,7 +352,7 @@ int slow_work_enqueue(struct slow_work *work) if (test_bit(SLOW_WORK_EXECUTING, &work->flags)) { set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags); } else { - if (work->ops->get_ref(work) < 0) + if (slow_work_get_ref(work) < 0) goto cant_get_ref; if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) list_add_tail(&work->link, &vslow_work_queue); @@ -479,21 +492,6 @@ static void slow_work_cull_timeout(unsigned long data) wake_up(&slow_work_thread_wq); } -/* - * Get a reference on slow work thread starter - */ -static int slow_work_new_thread_get_ref(struct slow_work *work) -{ - return 0; -} - -/* - * Drop a reference on slow work thread starter - */ -static void slow_work_new_thread_put_ref(struct slow_work *work) -{ -} - /* * Start a new slow work thread */ @@ -529,8 +527,6 @@ static void slow_work_new_thread_execute(struct slow_work *work) static const struct slow_work_ops slow_work_new_thread_ops = { .owner = THIS_MODULE, - .get_ref = slow_work_new_thread_get_ref, - .put_ref = slow_work_new_thread_put_ref, .execute = slow_work_new_thread_execute, }; -- GitLab From 0160950297c08f8233c89b9f9e7dd59cfb080809 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 19 Nov 2009 18:10:43 +0000 Subject: [PATCH 0948/1165] SLOW_WORK: Add support for cancellation of slow work Add support for cancellation of queued slow work and delayed slow work items. The cancellation functions will wait for items that are pending or undergoing execution to be discarded by the slow work facility. Attempting to enqueue work that is in the process of being cancelled will result in ECANCELED. Signed-off-by: Jens Axboe Signed-off-by: David Howells --- Documentation/slow-work.txt | 12 +++++- include/linux/slow-work.h | 2 + kernel/slow-work.c | 81 ++++++++++++++++++++++++++++++++++--- 3 files changed, 88 insertions(+), 7 deletions(-) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index c655c517fc6..2e384bd4dea 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -108,7 +108,17 @@ on the item, 0 otherwise. The items are reference counted, so there ought to be no need for a flush -operation. When all a module's slow work items have been processed, and the +operation. But as the reference counting is optional, means to cancel +existing work items are also included: + + cancel_slow_work(&myitem); + +can be used to cancel pending work. The above cancel function waits for +existing work to have been executed (or prevent execution of them, depending +on timing). + + +When all a module's slow work items have been processed, and the module has no further interest in the facility, it should unregister its interest: diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index 9adb2b30754..eef20182d5b 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -51,6 +51,7 @@ struct slow_work { #define SLOW_WORK_EXECUTING 1 /* item currently executing */ #define SLOW_WORK_ENQ_DEFERRED 2 /* item enqueue deferred */ #define SLOW_WORK_VERY_SLOW 3 /* item is very slow */ +#define SLOW_WORK_CANCELLING 4 /* item is being cancelled, don't enqueue */ const struct slow_work_ops *ops; /* operations table for this item */ struct list_head link; /* link in queue */ }; @@ -88,6 +89,7 @@ static inline void vslow_work_init(struct slow_work *work, } extern int slow_work_enqueue(struct slow_work *work); +extern void slow_work_cancel(struct slow_work *work); extern int slow_work_register_user(struct module *owner); extern void slow_work_unregister_user(struct module *owner); diff --git a/kernel/slow-work.c b/kernel/slow-work.c index fccf421eb5c..671cc434532 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -236,12 +236,17 @@ static bool slow_work_execute(int id) if (!test_and_clear_bit(SLOW_WORK_PENDING, &work->flags)) BUG(); - work->ops->execute(work); + /* don't execute if the work is in the process of being cancelled */ + if (!test_bit(SLOW_WORK_CANCELLING, &work->flags)) + work->ops->execute(work); if (very_slow) atomic_dec(&vslow_work_executing_count); clear_bit_unlock(SLOW_WORK_EXECUTING, &work->flags); + /* wake up anyone waiting for this work to be complete */ + wake_up_bit(&work->flags, SLOW_WORK_EXECUTING); + /* if someone tried to enqueue the item whilst we were executing it, * then it'll be left unenqueued to avoid multiple threads trying to * execute it simultaneously @@ -314,11 +319,16 @@ auto_requeue: * allowed to pick items to execute. This ensures that very slow items won't * overly block ones that are just ordinarily slow. * - * Returns 0 if successful, -EAGAIN if not. + * Returns 0 if successful, -EAGAIN if not (or -ECANCELED if cancelled work is + * attempted queued) */ int slow_work_enqueue(struct slow_work *work) { unsigned long flags; + int ret; + + if (test_bit(SLOW_WORK_CANCELLING, &work->flags)) + return -ECANCELED; BUG_ON(slow_work_user_count <= 0); BUG_ON(!work); @@ -335,6 +345,9 @@ int slow_work_enqueue(struct slow_work *work) if (!test_and_set_bit_lock(SLOW_WORK_PENDING, &work->flags)) { spin_lock_irqsave(&slow_work_queue_lock, flags); + if (unlikely(test_bit(SLOW_WORK_CANCELLING, &work->flags))) + goto cancelled; + /* we promise that we will not attempt to execute the work * function in more than one thread simultaneously * @@ -352,8 +365,9 @@ int slow_work_enqueue(struct slow_work *work) if (test_bit(SLOW_WORK_EXECUTING, &work->flags)) { set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags); } else { - if (slow_work_get_ref(work) < 0) - goto cant_get_ref; + ret = slow_work_get_ref(work); + if (ret < 0) + goto failed; if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) list_add_tail(&work->link, &vslow_work_queue); else @@ -365,12 +379,67 @@ int slow_work_enqueue(struct slow_work *work) } return 0; -cant_get_ref: +cancelled: + ret = -ECANCELED; +failed: spin_unlock_irqrestore(&slow_work_queue_lock, flags); - return -EAGAIN; + return ret; } EXPORT_SYMBOL(slow_work_enqueue); +static int slow_work_wait(void *word) +{ + schedule(); + return 0; +} + +/** + * slow_work_cancel - Cancel a slow work item + * @work: The work item to cancel + * + * This function will cancel a previously enqueued work item. If we cannot + * cancel the work item, it is guarenteed to have run when this function + * returns. + */ +void slow_work_cancel(struct slow_work *work) +{ + bool wait = true, put = false; + + set_bit(SLOW_WORK_CANCELLING, &work->flags); + + spin_lock_irq(&slow_work_queue_lock); + + if (test_bit(SLOW_WORK_PENDING, &work->flags) && + !list_empty(&work->link)) { + /* the link in the pending queue holds a reference on the item + * that we will need to release */ + list_del_init(&work->link); + wait = false; + put = true; + clear_bit(SLOW_WORK_PENDING, &work->flags); + + } else if (test_and_clear_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags)) { + /* the executor is holding our only reference on the item, so + * we merely need to wait for it to finish executing */ + clear_bit(SLOW_WORK_PENDING, &work->flags); + } + + spin_unlock_irq(&slow_work_queue_lock); + + /* the EXECUTING flag is set by the executor whilst the spinlock is set + * and before the item is dequeued - so assuming the above doesn't + * actually dequeue it, simply waiting for the EXECUTING flag to be + * released here should be sufficient */ + if (wait) + wait_on_bit(&work->flags, SLOW_WORK_EXECUTING, slow_work_wait, + TASK_UNINTERRUPTIBLE); + + clear_bit(SLOW_WORK_CANCELLING, &work->flags); + if (put) + slow_work_put_ref(work); +} +EXPORT_SYMBOL(slow_work_cancel); + /* * Schedule a cull of the thread pool at some time in the near future */ -- GitLab From 6b8268b17a1ffc942bc72d7d00274e433d6b6719 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 19 Nov 2009 18:10:47 +0000 Subject: [PATCH 0949/1165] SLOW_WORK: Add delayed_slow_work support This adds support for starting slow work with a delay, similar to the functionality we have for workqueues. Signed-off-by: Jens Axboe Signed-off-by: David Howells --- Documentation/slow-work.txt | 16 ++++- include/linux/slow-work.h | 29 ++++++++ kernel/slow-work.c | 129 +++++++++++++++++++++++++++++++++++- 3 files changed, 171 insertions(+), 3 deletions(-) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index 2e384bd4dea..a9d1b0ffdde 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -41,6 +41,13 @@ expand files, provided the time taken to do so isn't too long. Operations of both types may sleep during execution, thus tying up the thread loaned to it. +A further class of work item is available, based on the slow work item class: + + (*) Delayed slow work items. + +These are slow work items that have a timer to defer queueing of the item for +a while. + THREAD-TO-CLASS ALLOCATION -------------------------- @@ -93,6 +100,10 @@ Slow work items may then be set up by: slow_work_init(&myitem, &myitem_ops); + or: + + delayed_slow_work_init(&myitem, &myitem_ops); + or: vslow_work_init(&myitem, &myitem_ops); @@ -104,7 +115,9 @@ A suitably set up work item can then be enqueued for processing: int ret = slow_work_enqueue(&myitem); This will return a -ve error if the thread pool is unable to gain a reference -on the item, 0 otherwise. +on the item, 0 otherwise, or (for delayed work): + + int ret = delayed_slow_work_enqueue(&myitem, my_jiffy_delay); The items are reference counted, so there ought to be no need for a flush @@ -112,6 +125,7 @@ operation. But as the reference counting is optional, means to cancel existing work items are also included: cancel_slow_work(&myitem); + cancel_delayed_slow_work(&myitem); can be used to cancel pending work. The above cancel function waits for existing work to have been executed (or prevent execution of them, depending diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index eef20182d5b..b245b9a9cc0 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -17,6 +17,7 @@ #ifdef CONFIG_SLOW_WORK #include +#include struct slow_work; @@ -52,10 +53,16 @@ struct slow_work { #define SLOW_WORK_ENQ_DEFERRED 2 /* item enqueue deferred */ #define SLOW_WORK_VERY_SLOW 3 /* item is very slow */ #define SLOW_WORK_CANCELLING 4 /* item is being cancelled, don't enqueue */ +#define SLOW_WORK_DELAYED 5 /* item is struct delayed_slow_work with active timer */ const struct slow_work_ops *ops; /* operations table for this item */ struct list_head link; /* link in queue */ }; +struct delayed_slow_work { + struct slow_work work; + struct timer_list timer; +}; + /** * slow_work_init - Initialise a slow work item * @work: The work item to initialise @@ -71,6 +78,20 @@ static inline void slow_work_init(struct slow_work *work, INIT_LIST_HEAD(&work->link); } +/** + * slow_work_init - Initialise a delayed slow work item + * @work: The work item to initialise + * @ops: The operations to use to handle the slow work item + * + * Initialise a delayed slow work item. + */ +static inline void delayed_slow_work_init(struct delayed_slow_work *dwork, + const struct slow_work_ops *ops) +{ + init_timer(&dwork->timer); + slow_work_init(&dwork->work, ops); +} + /** * vslow_work_init - Initialise a very slow work item * @work: The work item to initialise @@ -93,6 +114,14 @@ extern void slow_work_cancel(struct slow_work *work); extern int slow_work_register_user(struct module *owner); extern void slow_work_unregister_user(struct module *owner); +extern int delayed_slow_work_enqueue(struct delayed_slow_work *dwork, + unsigned long delay); + +static inline void delayed_slow_work_cancel(struct delayed_slow_work *dwork) +{ + slow_work_cancel(&dwork->work); +} + #ifdef CONFIG_SYSCTL extern ctl_table slow_work_sysctls[]; #endif diff --git a/kernel/slow-work.c b/kernel/slow-work.c index 671cc434532..f67e1daae93 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -406,11 +406,40 @@ void slow_work_cancel(struct slow_work *work) bool wait = true, put = false; set_bit(SLOW_WORK_CANCELLING, &work->flags); + smp_mb(); + + /* if the work item is a delayed work item with an active timer, we + * need to wait for the timer to finish _before_ getting the spinlock, + * lest we deadlock against the timer routine + * + * the timer routine will leave DELAYED set if it notices the + * CANCELLING flag in time + */ + if (test_bit(SLOW_WORK_DELAYED, &work->flags)) { + struct delayed_slow_work *dwork = + container_of(work, struct delayed_slow_work, work); + del_timer_sync(&dwork->timer); + } spin_lock_irq(&slow_work_queue_lock); - if (test_bit(SLOW_WORK_PENDING, &work->flags) && - !list_empty(&work->link)) { + if (test_bit(SLOW_WORK_DELAYED, &work->flags)) { + /* the timer routine aborted or never happened, so we are left + * holding the timer's reference on the item and should just + * drop the pending flag and wait for any ongoing execution to + * finish */ + struct delayed_slow_work *dwork = + container_of(work, struct delayed_slow_work, work); + + BUG_ON(timer_pending(&dwork->timer)); + BUG_ON(!list_empty(&work->link)); + + clear_bit(SLOW_WORK_DELAYED, &work->flags); + put = true; + clear_bit(SLOW_WORK_PENDING, &work->flags); + + } else if (test_bit(SLOW_WORK_PENDING, &work->flags) && + !list_empty(&work->link)) { /* the link in the pending queue holds a reference on the item * that we will need to release */ list_del_init(&work->link); @@ -440,6 +469,102 @@ void slow_work_cancel(struct slow_work *work) } EXPORT_SYMBOL(slow_work_cancel); +/* + * Handle expiry of the delay timer, indicating that a delayed slow work item + * should now be queued if not cancelled + */ +static void delayed_slow_work_timer(unsigned long data) +{ + struct slow_work *work = (struct slow_work *) data; + unsigned long flags; + bool queued = false, put = false; + + spin_lock_irqsave(&slow_work_queue_lock, flags); + if (likely(!test_bit(SLOW_WORK_CANCELLING, &work->flags))) { + clear_bit(SLOW_WORK_DELAYED, &work->flags); + + if (test_bit(SLOW_WORK_EXECUTING, &work->flags)) { + /* we discard the reference the timer was holding in + * favour of the one the executor holds */ + set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags); + put = true; + } else { + if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) + list_add_tail(&work->link, &vslow_work_queue); + else + list_add_tail(&work->link, &slow_work_queue); + queued = true; + } + } + + spin_unlock_irqrestore(&slow_work_queue_lock, flags); + if (put) + slow_work_put_ref(work); + if (queued) + wake_up(&slow_work_thread_wq); +} + +/** + * delayed_slow_work_enqueue - Schedule a delayed slow work item for processing + * @dwork: The delayed work item to queue + * @delay: When to start executing the work, in jiffies from now + * + * This is similar to slow_work_enqueue(), but it adds a delay before the work + * is actually queued for processing. + * + * The item can have delayed processing requested on it whilst it is being + * executed. The delay will begin immediately, and if it expires before the + * item finishes executing, the item will be placed back on the queue when it + * has done executing. + */ +int delayed_slow_work_enqueue(struct delayed_slow_work *dwork, + unsigned long delay) +{ + struct slow_work *work = &dwork->work; + unsigned long flags; + int ret; + + if (delay == 0) + return slow_work_enqueue(&dwork->work); + + BUG_ON(slow_work_user_count <= 0); + BUG_ON(!work); + BUG_ON(!work->ops); + + if (test_bit(SLOW_WORK_CANCELLING, &work->flags)) + return -ECANCELED; + + if (!test_and_set_bit_lock(SLOW_WORK_PENDING, &work->flags)) { + spin_lock_irqsave(&slow_work_queue_lock, flags); + + if (test_bit(SLOW_WORK_CANCELLING, &work->flags)) + goto cancelled; + + /* the timer holds a reference whilst it is pending */ + ret = work->ops->get_ref(work); + if (ret < 0) + goto cant_get_ref; + + if (test_and_set_bit(SLOW_WORK_DELAYED, &work->flags)) + BUG(); + dwork->timer.expires = jiffies + delay; + dwork->timer.data = (unsigned long) work; + dwork->timer.function = delayed_slow_work_timer; + add_timer(&dwork->timer); + + spin_unlock_irqrestore(&slow_work_queue_lock, flags); + } + + return 0; + +cancelled: + ret = -ECANCELED; +cant_get_ref: + spin_unlock_irqrestore(&slow_work_queue_lock, flags); + return ret; +} +EXPORT_SYMBOL(delayed_slow_work_enqueue); + /* * Schedule a cull of the thread pool at some time in the near future */ -- GitLab From 8fba10a42d191de612e60e7009c8f0313f90a9b3 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:10:51 +0000 Subject: [PATCH 0950/1165] SLOW_WORK: Allow the work items to be viewed through a /proc file Allow the executing and queued work items to be viewed through a /proc file for debugging purposes. The contents look something like the following: THR PID ITEM ADDR FL MARK DESC === ===== ================ == ===== ========== 0 3005 ffff880023f52348 a 952ms FSC: OBJ17d3: LOOK 1 3006 ffff880024e33668 2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2 2 3165 ffff8800296dd180 a 424ms FSC: OBJ17e4: LOOK 3 4089 ffff8800262c8d78 a 212ms FSC: OBJ17ea: CRTN 4 4090 ffff88002792bed8 2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2 5 4092 ffff88002a0ef308 2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2 6 4094 ffff88002abaf4b8 2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2 7 4095 ffff88002bb188e0 a 388ms FSC: OBJ17e9: CRTN vsq - ffff880023d99668 1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2 vsq - ffff8800295d1740 1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2 vsq - ffff880025ba3308 1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2 vsq - ffff880024ec83e0 1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2 vsq - ffff880026618e00 1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2 vsq - ffff880025a2a4b8 1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2 vsq - ffff880023cbe6d8 9 212ms FSC: OBJ17eb: LOOK vsq - ffff880024d37590 9 212ms FSC: OBJ17ec: LOOK vsq - ffff880027746cb0 9 212ms FSC: OBJ17ed: LOOK vsq - ffff880024d37ae8 9 212ms FSC: OBJ17ee: LOOK vsq - ffff880024d37cb0 9 212ms FSC: OBJ17ef: LOOK vsq - ffff880025036550 9 212ms FSC: OBJ17f0: LOOK vsq - ffff8800250368e0 9 212ms FSC: OBJ17f1: LOOK vsq - ffff880025036aa8 9 212ms FSC: OBJ17f2: LOOK In the 'THR' column, executing items show the thread they're occupying and queued threads indicate which queue they're on. 'PID' shows the process ID of a slow-work thread that's executing something. 'FL' shows the work item flags. 'MARK' indicates how long since an item was queued or began executing. Lastly, the 'DESC' column permits the owner of an item to give some information. Signed-off-by: David Howells --- Documentation/slow-work.txt | 60 +++++++++- include/linux/slow-work.h | 11 ++ init/Kconfig | 10 ++ kernel/Makefile | 1 + kernel/slow-work-proc.c | 227 ++++++++++++++++++++++++++++++++++++ kernel/slow-work.c | 44 +++++-- kernel/slow-work.h | 72 ++++++++++++ 7 files changed, 413 insertions(+), 12 deletions(-) create mode 100644 kernel/slow-work-proc.c create mode 100644 kernel/slow-work.h diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index a9d1b0ffdde..f120238e70f 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -149,7 +149,8 @@ ITEM OPERATIONS =============== Each work item requires a table of operations of type struct slow_work_ops. -Only ->execute() is required, getting and putting of a reference are optional. +Only ->execute() is required; the getting and putting of a reference and the +describing of an item are all optional. (*) Get a reference on an item: @@ -179,6 +180,16 @@ Only ->execute() is required, getting and putting of a reference are optional. This should perform the work required of the item. It may sleep, it may perform disk I/O and it may wait for locks. + (*) View an item through /proc: + + void (*desc)(struct slow_work *work, struct seq_file *m); + + If supplied, this should print to 'm' a small string describing the work + the item is to do. This should be no more than about 40 characters, and + shouldn't include a newline character. + + See the 'Viewing executing and queued items' section below. + ================== POOL CONFIGURATION @@ -203,3 +214,50 @@ The slow-work thread pool has a number of configurables: is bounded to between 1 and one fewer than the number of active threads. This ensures there is always at least one thread that can process very slow work items, and always at least one thread that won't. + + +================================== +VIEWING EXECUTING AND QUEUED ITEMS +================================== + +If CONFIG_SLOW_WORK_PROC is enabled, a proc file is made available: + + /proc/slow_work_rq + +through which the list of work items being executed and the queues of items to +be executed may be viewed. The owner of a work item is given the chance to +add some information of its own. + +The contents look something like the following: + + THR PID ITEM ADDR FL MARK DESC + === ===== ================ == ===== ========== + 0 3005 ffff880023f52348 a 952ms FSC: OBJ17d3: LOOK + 1 3006 ffff880024e33668 2 160ms FSC: OBJ17e5 OP60d3b: Write1/Store fl=2 + 2 3165 ffff8800296dd180 a 424ms FSC: OBJ17e4: LOOK + 3 4089 ffff8800262c8d78 a 212ms FSC: OBJ17ea: CRTN + 4 4090 ffff88002792bed8 2 388ms FSC: OBJ17e8 OP60d36: Write1/Store fl=2 + 5 4092 ffff88002a0ef308 2 388ms FSC: OBJ17e7 OP60d2e: Write1/Store fl=2 + 6 4094 ffff88002abaf4b8 2 132ms FSC: OBJ17e2 OP60d4e: Write1/Store fl=2 + 7 4095 ffff88002bb188e0 a 388ms FSC: OBJ17e9: CRTN + vsq - ffff880023d99668 1 308ms FSC: OBJ17e0 OP60f91: Write1/EnQ fl=2 + vsq - ffff8800295d1740 1 212ms FSC: OBJ16be OP4d4b6: Write1/EnQ fl=2 + vsq - ffff880025ba3308 1 160ms FSC: OBJ179a OP58dec: Write1/EnQ fl=2 + vsq - ffff880024ec83e0 1 160ms FSC: OBJ17ae OP599f2: Write1/EnQ fl=2 + vsq - ffff880026618e00 1 160ms FSC: OBJ17e6 OP60d33: Write1/EnQ fl=2 + vsq - ffff880025a2a4b8 1 132ms FSC: OBJ16a2 OP4d583: Write1/EnQ fl=2 + vsq - ffff880023cbe6d8 9 212ms FSC: OBJ17eb: LOOK + vsq - ffff880024d37590 9 212ms FSC: OBJ17ec: LOOK + vsq - ffff880027746cb0 9 212ms FSC: OBJ17ed: LOOK + vsq - ffff880024d37ae8 9 212ms FSC: OBJ17ee: LOOK + vsq - ffff880024d37cb0 9 212ms FSC: OBJ17ef: LOOK + vsq - ffff880025036550 9 212ms FSC: OBJ17f0: LOOK + vsq - ffff8800250368e0 9 212ms FSC: OBJ17f1: LOOK + vsq - ffff880025036aa8 9 212ms FSC: OBJ17f2: LOOK + +In the 'THR' column, executing items show the thread they're occupying and +queued threads indicate which queue they're on. 'PID' shows the process ID of +a slow-work thread that's executing something. 'FL' shows the work item flags. +'MARK' indicates how long since an item was queued or began executing. Lastly, +the 'DESC' column permits the owner of an item to give some information. + diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index b245b9a9cc0..f41485145ed 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -20,6 +20,9 @@ #include struct slow_work; +#ifdef CONFIG_SLOW_WORK_PROC +struct seq_file; +#endif /* * The operations used to support slow work items @@ -38,6 +41,11 @@ struct slow_work_ops { /* execute a work item */ void (*execute)(struct slow_work *work); + +#ifdef CONFIG_SLOW_WORK_PROC + /* describe a work item for /proc */ + void (*desc)(struct slow_work *work, struct seq_file *m); +#endif }; /* @@ -56,6 +64,9 @@ struct slow_work { #define SLOW_WORK_DELAYED 5 /* item is struct delayed_slow_work with active timer */ const struct slow_work_ops *ops; /* operations table for this item */ struct list_head link; /* link in queue */ +#ifdef CONFIG_SLOW_WORK_PROC + struct timespec mark; /* jiffies at which queued or exec begun */ +#endif }; struct delayed_slow_work { diff --git a/init/Kconfig b/init/Kconfig index 9e03ef8b311..ab5c64801fe 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1098,6 +1098,16 @@ config SLOW_WORK See Documentation/slow-work.txt. +config SLOW_WORK_PROC + bool "Slow work debugging through /proc" + default n + depends on SLOW_WORK && PROC_FS + help + Display the contents of the slow work run queue through /proc, + including items currently executing. + + See Documentation/slow-work.txt. + endmenu # General setup config HAVE_GENERIC_DMA_COHERENT diff --git a/kernel/Makefile b/kernel/Makefile index b8d4cd8ac0b..776ffed1556 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -94,6 +94,7 @@ obj-$(CONFIG_X86_DS) += trace/ obj-$(CONFIG_RING_BUFFER) += trace/ obj-$(CONFIG_SMP) += sched_cpupri.o obj-$(CONFIG_SLOW_WORK) += slow-work.o +obj-$(CONFIG_SLOW_WORK_PROC) += slow-work-proc.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y) diff --git a/kernel/slow-work-proc.c b/kernel/slow-work-proc.c new file mode 100644 index 00000000000..3988032571f --- /dev/null +++ b/kernel/slow-work-proc.c @@ -0,0 +1,227 @@ +/* Slow work debugging + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include "slow-work.h" + +#define ITERATOR_SHIFT (BITS_PER_LONG - 4) +#define ITERATOR_SELECTOR (0xfUL << ITERATOR_SHIFT) +#define ITERATOR_COUNTER (~ITERATOR_SELECTOR) + +void slow_work_new_thread_desc(struct slow_work *work, struct seq_file *m) +{ + seq_puts(m, "Slow-work: New thread"); +} + +/* + * Render the time mark field on a work item into a 5-char time with units plus + * a space + */ +static void slow_work_print_mark(struct seq_file *m, struct slow_work *work) +{ + struct timespec now, diff; + + now = CURRENT_TIME; + diff = timespec_sub(now, work->mark); + + if (diff.tv_sec < 0) + seq_puts(m, " -ve "); + else if (diff.tv_sec == 0 && diff.tv_nsec < 1000) + seq_printf(m, "%3luns ", diff.tv_nsec); + else if (diff.tv_sec == 0 && diff.tv_nsec < 1000000) + seq_printf(m, "%3luus ", diff.tv_nsec / 1000); + else if (diff.tv_sec == 0 && diff.tv_nsec < 1000000000) + seq_printf(m, "%3lums ", diff.tv_nsec / 1000000); + else if (diff.tv_sec <= 1) + seq_puts(m, " 1s "); + else if (diff.tv_sec < 60) + seq_printf(m, "%4lus ", diff.tv_sec); + else if (diff.tv_sec < 60 * 60) + seq_printf(m, "%4lum ", diff.tv_sec / 60); + else if (diff.tv_sec < 60 * 60 * 24) + seq_printf(m, "%4luh ", diff.tv_sec / 3600); + else + seq_puts(m, "exces "); +} + +/* + * Describe a slow work item for /proc + */ +static int slow_work_runqueue_show(struct seq_file *m, void *v) +{ + struct slow_work *work; + struct list_head *p = v; + unsigned long id; + + switch ((unsigned long) v) { + case 1: + seq_puts(m, "THR PID ITEM ADDR FL MARK DESC\n"); + return 0; + case 2: + seq_puts(m, "=== ===== ================ == ===== ==========\n"); + return 0; + + case 3 ... 3 + SLOW_WORK_THREAD_LIMIT - 1: + id = (unsigned long) v - 3; + + read_lock(&slow_work_execs_lock); + work = slow_work_execs[id]; + if (work) { + smp_read_barrier_depends(); + + seq_printf(m, "%3lu %5d %16p %2lx ", + id, slow_work_pids[id], work, work->flags); + slow_work_print_mark(m, work); + + if (work->ops->desc) + work->ops->desc(work, m); + seq_putc(m, '\n'); + } + read_unlock(&slow_work_execs_lock); + return 0; + + default: + work = list_entry(p, struct slow_work, link); + seq_printf(m, "%3s - %16p %2lx ", + work->flags & SLOW_WORK_VERY_SLOW ? "vsq" : "sq", + work, work->flags); + slow_work_print_mark(m, work); + + if (work->ops->desc) + work->ops->desc(work, m); + seq_putc(m, '\n'); + return 0; + } +} + +/* + * map the iterator to a work item + */ +static void *slow_work_runqueue_index(struct seq_file *m, loff_t *_pos) +{ + struct list_head *p; + unsigned long count, id; + + switch (*_pos >> ITERATOR_SHIFT) { + case 0x0: + if (*_pos == 0) + *_pos = 1; + if (*_pos < 3) + return (void *)(unsigned long) *_pos; + if (*_pos < 3 + SLOW_WORK_THREAD_LIMIT) + for (id = *_pos - 3; + id < SLOW_WORK_THREAD_LIMIT; + id++, (*_pos)++) + if (slow_work_execs[id]) + return (void *)(unsigned long) *_pos; + *_pos = 0x1UL << ITERATOR_SHIFT; + + case 0x1: + count = *_pos & ITERATOR_COUNTER; + list_for_each(p, &slow_work_queue) { + if (count == 0) + return p; + count--; + } + *_pos = 0x2UL << ITERATOR_SHIFT; + + case 0x2: + count = *_pos & ITERATOR_COUNTER; + list_for_each(p, &vslow_work_queue) { + if (count == 0) + return p; + count--; + } + *_pos = 0x3UL << ITERATOR_SHIFT; + + default: + return NULL; + } +} + +/* + * set up the iterator to start reading from the first line + */ +static void *slow_work_runqueue_start(struct seq_file *m, loff_t *_pos) +{ + spin_lock_irq(&slow_work_queue_lock); + return slow_work_runqueue_index(m, _pos); +} + +/* + * move to the next line + */ +static void *slow_work_runqueue_next(struct seq_file *m, void *v, loff_t *_pos) +{ + struct list_head *p = v; + unsigned long selector = *_pos >> ITERATOR_SHIFT; + + (*_pos)++; + switch (selector) { + case 0x0: + return slow_work_runqueue_index(m, _pos); + + case 0x1: + if (*_pos >> ITERATOR_SHIFT == 0x1) { + p = p->next; + if (p != &slow_work_queue) + return p; + } + *_pos = 0x2UL << ITERATOR_SHIFT; + p = &vslow_work_queue; + + case 0x2: + if (*_pos >> ITERATOR_SHIFT == 0x2) { + p = p->next; + if (p != &vslow_work_queue) + return p; + } + *_pos = 0x3UL << ITERATOR_SHIFT; + + default: + return NULL; + } +} + +/* + * clean up after reading + */ +static void slow_work_runqueue_stop(struct seq_file *m, void *v) +{ + spin_unlock_irq(&slow_work_queue_lock); +} + +static const struct seq_operations slow_work_runqueue_ops = { + .start = slow_work_runqueue_start, + .stop = slow_work_runqueue_stop, + .next = slow_work_runqueue_next, + .show = slow_work_runqueue_show, +}; + +/* + * open "/proc/slow_work_rq" to list queue contents + */ +static int slow_work_runqueue_open(struct inode *inode, struct file *file) +{ + return seq_open(file, &slow_work_runqueue_ops); +} + +const struct file_operations slow_work_runqueue_fops = { + .owner = THIS_MODULE, + .open = slow_work_runqueue_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; diff --git a/kernel/slow-work.c b/kernel/slow-work.c index f67e1daae93..b763bc2d267 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -16,13 +16,8 @@ #include #include #include - -#define SLOW_WORK_CULL_TIMEOUT (5 * HZ) /* cull threads 5s after running out of - * things to do */ -#define SLOW_WORK_OOM_TIMEOUT (5 * HZ) /* can't start new threads for 5s after - * OOM */ - -#define SLOW_WORK_THREAD_LIMIT 255 /* abs maximum number of slow-work threads */ +#include +#include "slow-work.h" static void slow_work_cull_timeout(unsigned long); static void slow_work_oom_timeout(unsigned long); @@ -116,6 +111,15 @@ static DECLARE_WAIT_QUEUE_HEAD(slow_work_unreg_wq); static DEFINE_MUTEX(slow_work_unreg_sync_lock); #endif +/* + * Data for tracking currently executing items for indication through /proc + */ +#ifdef CONFIG_SLOW_WORK_PROC +struct slow_work *slow_work_execs[SLOW_WORK_THREAD_LIMIT]; +pid_t slow_work_pids[SLOW_WORK_THREAD_LIMIT]; +DEFINE_RWLOCK(slow_work_execs_lock); +#endif + /* * The queues of work items and the lock governing access to them. These are * shared between all the CPUs. It doesn't make sense to have per-CPU queues @@ -124,9 +128,9 @@ static DEFINE_MUTEX(slow_work_unreg_sync_lock); * There are two queues of work items: one for slow work items, and one for * very slow work items. */ -static LIST_HEAD(slow_work_queue); -static LIST_HEAD(vslow_work_queue); -static DEFINE_SPINLOCK(slow_work_queue_lock); +LIST_HEAD(slow_work_queue); +LIST_HEAD(vslow_work_queue); +DEFINE_SPINLOCK(slow_work_queue_lock); /* * The thread controls. A variable used to signal to the threads that they @@ -182,7 +186,7 @@ static unsigned slow_work_calc_vsmax(void) * Attempt to execute stuff queued on a slow thread. Return true if we managed * it, false if there was nothing to do. */ -static bool slow_work_execute(int id) +static noinline bool slow_work_execute(int id) { #ifdef CONFIG_MODULES struct module *module; @@ -227,6 +231,10 @@ static bool slow_work_execute(int id) if (work) slow_work_thread_processing[id] = work->owner; #endif + if (work) { + slow_work_mark_time(work); + slow_work_begin_exec(id, work); + } spin_unlock_irq(&slow_work_queue_lock); @@ -247,6 +255,8 @@ static bool slow_work_execute(int id) /* wake up anyone waiting for this work to be complete */ wake_up_bit(&work->flags, SLOW_WORK_EXECUTING); + slow_work_end_exec(id, work); + /* if someone tried to enqueue the item whilst we were executing it, * then it'll be left unenqueued to avoid multiple threads trying to * execute it simultaneously @@ -285,6 +295,7 @@ auto_requeue: * - we transfer our ref on the item back to the appropriate queue * - don't wake another thread up as we're awake already */ + slow_work_mark_time(work); if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) list_add_tail(&work->link, &vslow_work_queue); else @@ -368,6 +379,7 @@ int slow_work_enqueue(struct slow_work *work) ret = slow_work_get_ref(work); if (ret < 0) goto failed; + slow_work_mark_time(work); if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) list_add_tail(&work->link, &vslow_work_queue); else @@ -489,6 +501,7 @@ static void delayed_slow_work_timer(unsigned long data) set_bit(SLOW_WORK_ENQ_DEFERRED, &work->flags); put = true; } else { + slow_work_mark_time(work); if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) list_add_tail(&work->link, &vslow_work_queue); else @@ -627,6 +640,7 @@ static int slow_work_thread(void *_data) id = find_first_zero_bit(slow_work_ids, SLOW_WORK_THREAD_LIMIT); BUG_ON(id < 0 || id >= SLOW_WORK_THREAD_LIMIT); __set_bit(id, slow_work_ids); + slow_work_set_thread_pid(id, current->pid); spin_unlock_irq(&slow_work_queue_lock); sprintf(current->comm, "kslowd%03u", id); @@ -669,6 +683,7 @@ static int slow_work_thread(void *_data) } spin_lock_irq(&slow_work_queue_lock); + slow_work_set_thread_pid(id, 0); __clear_bit(id, slow_work_ids); spin_unlock_irq(&slow_work_queue_lock); @@ -722,6 +737,9 @@ static void slow_work_new_thread_execute(struct slow_work *work) static const struct slow_work_ops slow_work_new_thread_ops = { .owner = THIS_MODULE, .execute = slow_work_new_thread_execute, +#ifdef CONFIG_SLOW_WORK_PROC + .desc = slow_work_new_thread_desc, +#endif }; /* @@ -948,6 +966,10 @@ static int __init init_slow_work(void) #ifdef CONFIG_SYSCTL if (slow_work_max_max_threads < nr_cpus * 2) slow_work_max_max_threads = nr_cpus * 2; +#endif +#ifdef CONFIG_SLOW_WORK_PROC + proc_create("slow_work_rq", S_IFREG | 0400, NULL, + &slow_work_runqueue_fops); #endif return 0; } diff --git a/kernel/slow-work.h b/kernel/slow-work.h new file mode 100644 index 00000000000..3c2f007f3ad --- /dev/null +++ b/kernel/slow-work.h @@ -0,0 +1,72 @@ +/* Slow work private definitions + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#define SLOW_WORK_CULL_TIMEOUT (5 * HZ) /* cull threads 5s after running out of + * things to do */ +#define SLOW_WORK_OOM_TIMEOUT (5 * HZ) /* can't start new threads for 5s after + * OOM */ + +#define SLOW_WORK_THREAD_LIMIT 255 /* abs maximum number of slow-work threads */ + +/* + * slow-work.c + */ +#ifdef CONFIG_SLOW_WORK_PROC +extern struct slow_work *slow_work_execs[]; +extern pid_t slow_work_pids[]; +extern rwlock_t slow_work_execs_lock; +#endif + +extern struct list_head slow_work_queue; +extern struct list_head vslow_work_queue; +extern spinlock_t slow_work_queue_lock; + +/* + * slow-work-proc.c + */ +#ifdef CONFIG_SLOW_WORK_PROC +extern const struct file_operations slow_work_runqueue_fops; + +extern void slow_work_new_thread_desc(struct slow_work *, struct seq_file *); +#endif + +/* + * Helper functions + */ +static inline void slow_work_set_thread_pid(int id, pid_t pid) +{ +#ifdef CONFIG_SLOW_WORK_PROC + slow_work_pids[id] = pid; +#endif +} + +static inline void slow_work_mark_time(struct slow_work *work) +{ +#ifdef CONFIG_SLOW_WORK_PROC + work->mark = CURRENT_TIME; +#endif +} + +static inline void slow_work_begin_exec(int id, struct slow_work *work) +{ +#ifdef CONFIG_SLOW_WORK_PROC + slow_work_execs[id] = work; +#endif +} + +static inline void slow_work_end_exec(int id, struct slow_work *work) +{ +#ifdef CONFIG_SLOW_WORK_PROC + write_lock(&slow_work_execs_lock); + slow_work_execs[id] = NULL; + write_unlock(&slow_work_execs_lock); +#endif +} -- GitLab From 31ba99d304494cb28fa8671ccc769c5543e1165d Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:10:53 +0000 Subject: [PATCH 0951/1165] SLOW_WORK: Allow the owner of a work item to determine if it is queued or not Add a function (slow_work_is_queued()) to permit the owner of a work item to determine if the item is queued or not. The work item is counted as being queued if it is actually on the queue, not just if it is pending. If it is executing and pending, then it is not on the queue, but will rather be put back on the queue when execution finishes. This permits a caller to quickly work out if it may be able to put another, dependent work item on the queue behind it, or whether it will have to wait till that is finished. This can be used by CacheFiles to work out whether the creation a new object can be immediately deferred when it has to wait for an old object to be deleted, or whether a wait must take place. If a wait is necessary, then the slow-work thread can otherwise get blocked, preventing the deletion from taking place. Signed-off-by: David Howells --- Documentation/slow-work.txt | 15 +++++++++++++++ include/linux/slow-work.h | 19 +++++++++++++++++++ 2 files changed, 34 insertions(+) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index f120238e70f..0169c9d9dd1 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -144,6 +144,21 @@ from being taken away before it completes. module should almost certainly be THIS_MODULE. +================ +HELPER FUNCTIONS +================ + +The slow-work facility provides a function by which it can be determined +whether or not an item is queued for later execution: + + bool queued = slow_work_is_queued(struct slow_work *work); + +If it returns false, then the item is not on the queue (it may be executing +with a requeue pending). This can be used to work out whether an item on which +another depends is on the queue, thus allowing a dependent item to be queued +after it. + + =============== ITEM OPERATIONS =============== diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index f41485145ed..bfd3ab4c889 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -120,6 +120,25 @@ static inline void vslow_work_init(struct slow_work *work, INIT_LIST_HEAD(&work->link); } +/** + * slow_work_is_queued - Determine if a slow work item is on the work queue + * work: The work item to test + * + * Determine if the specified slow-work item is on the work queue. This + * returns true if it is actually on the queue. + * + * If the item is executing and has been marked for requeue when execution + * finishes, then false will be returned. + * + * Anyone wishing to wait for completion of execution can wait on the + * SLOW_WORK_EXECUTING bit. + */ +static inline bool slow_work_is_queued(struct slow_work *work) +{ + unsigned long flags = work->flags; + return flags & SLOW_WORK_PENDING && !(flags & SLOW_WORK_EXECUTING); +} + extern int slow_work_enqueue(struct slow_work *work); extern void slow_work_cancel(struct slow_work *work); extern int slow_work_register_user(struct module *owner); -- GitLab From 3bde31a4ac225cb5805be02eff6eaaf7e0766ccd Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:10:57 +0000 Subject: [PATCH 0952/1165] SLOW_WORK: Allow a requeueable work item to sleep till the thread is needed Add a function to allow a requeueable work item to sleep till the thread processing it is needed by the slow-work facility to perform other work. Sometimes a work item can't progress immediately, but must wait for the completion of another work item that's currently being processed by another slow-work thread. In some circumstances, the waiting item could instead - theoretically - put itself back on the queue and yield its thread back to the slow-work facility, thus waiting till it gets processing time again before attempting to progress. This would allow other work items processing time on that thread. However, this only works if there is something on the queue for it to queue behind - otherwise it will just get a thread again immediately, and will end up cycling between the queue and the thread, eating up valuable CPU time. So, slow_work_sleep_till_thread_needed() is provided such that an item can put itself on a wait queue that will wake it up when the event it is actually interested in occurs, then call this function in lieu of calling schedule(). This function will then sleep until either the item's event occurs or another work item appears on the queue. If another work item is queued, but the item's event hasn't occurred, then the work item should requeue itself and yield the thread back to the slow-work facility by returning. This can be used by CacheFiles for an object that is being created on one thread to wait for an object being deleted on another thread where there is nothing on the queue for the creation to go and wait behind. As soon as an item appears on the queue that could be given thread time instead, CacheFiles can stick the creating object back on the queue and return to the slow-work facility - assuming the object deletion didn't also complete. Signed-off-by: David Howells --- Documentation/slow-work.txt | 44 +++++++++++++++++ include/linux/slow-work.h | 3 ++ kernel/slow-work.c | 94 +++++++++++++++++++++++++++++++++---- 3 files changed, 132 insertions(+), 9 deletions(-) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index 0169c9d9dd1..52bc3143372 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -158,6 +158,50 @@ with a requeue pending). This can be used to work out whether an item on which another depends is on the queue, thus allowing a dependent item to be queued after it. +If the above shows an item on which another depends not to be queued, then the +owner of the dependent item might need to wait. However, to avoid locking up +the threads unnecessarily be sleeping in them, it can make sense under some +circumstances to return the work item to the queue, thus deferring it until +some other items have had a chance to make use of the yielded thread. + +To yield a thread and defer an item, the work function should simply enqueue +the work item again and return. However, this doesn't work if there's nothing +actually on the queue, as the thread just vacated will jump straight back into +the item's work function, thus busy waiting on a CPU. + +Instead, the item should use the thread to wait for the dependency to go away, +but rather than using schedule() or schedule_timeout() to sleep, it should use +the following function: + + bool requeue = slow_work_sleep_till_thread_needed( + struct slow_work *work, + signed long *_timeout); + +This will add a second wait and then sleep, such that it will be woken up if +either something appears on the queue that could usefully make use of the +thread - and behind which this item can be queued, or if the event the caller +set up to wait for happens. True will be returned if something else appeared +on the queue and this work function should perhaps return, of false if +something else woke it up. The timeout is as for schedule_timeout(). + +For example: + + wq = bit_waitqueue(&my_flags, MY_BIT); + init_wait(&wait); + requeue = false; + do { + prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE); + if (!test_bit(MY_BIT, &my_flags)) + break; + requeue = slow_work_sleep_till_thread_needed(&my_work, + &timeout); + } while (timeout > 0 && !requeue); + finish_wait(wq, &wait); + if (!test_bit(MY_BIT, &my_flags) + goto do_my_thing; + if (requeue) + return; // to slow_work + =============== ITEM OPERATIONS diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index bfd3ab4c889..5035a269173 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -152,6 +152,9 @@ static inline void delayed_slow_work_cancel(struct delayed_slow_work *dwork) slow_work_cancel(&dwork->work); } +extern bool slow_work_sleep_till_thread_needed(struct slow_work *work, + signed long *_timeout); + #ifdef CONFIG_SYSCTL extern ctl_table slow_work_sysctls[]; #endif diff --git a/kernel/slow-work.c b/kernel/slow-work.c index b763bc2d267..da94f3c101a 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -132,6 +132,15 @@ LIST_HEAD(slow_work_queue); LIST_HEAD(vslow_work_queue); DEFINE_SPINLOCK(slow_work_queue_lock); +/* + * The following are two wait queues that get pinged when a work item is placed + * on an empty queue. These allow work items that are hogging a thread by + * sleeping in a way that could be deferred to yield their thread and enqueue + * themselves. + */ +static DECLARE_WAIT_QUEUE_HEAD(slow_work_queue_waits_for_occupation); +static DECLARE_WAIT_QUEUE_HEAD(vslow_work_queue_waits_for_occupation); + /* * The thread controls. A variable used to signal to the threads that they * should exit when the queue is empty, a waitqueue used by the threads to wait @@ -305,6 +314,50 @@ auto_requeue: return true; } +/** + * slow_work_sleep_till_thread_needed - Sleep till thread needed by other work + * work: The work item under execution that wants to sleep + * _timeout: Scheduler sleep timeout + * + * Allow a requeueable work item to sleep on a slow-work processor thread until + * that thread is needed to do some other work or the sleep is interrupted by + * some other event. + * + * The caller must set up a wake up event before calling this and must have set + * the appropriate sleep mode (such as TASK_UNINTERRUPTIBLE) and tested its own + * condition before calling this function as no test is made here. + * + * False is returned if there is nothing on the queue; true is returned if the + * work item should be requeued + */ +bool slow_work_sleep_till_thread_needed(struct slow_work *work, + signed long *_timeout) +{ + wait_queue_head_t *wfo_wq; + struct list_head *queue; + + DEFINE_WAIT(wait); + + if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) { + wfo_wq = &vslow_work_queue_waits_for_occupation; + queue = &vslow_work_queue; + } else { + wfo_wq = &slow_work_queue_waits_for_occupation; + queue = &slow_work_queue; + } + + if (!list_empty(queue)) + return true; + + add_wait_queue_exclusive(wfo_wq, &wait); + if (list_empty(queue)) + *_timeout = schedule_timeout(*_timeout); + finish_wait(wfo_wq, &wait); + + return !list_empty(queue); +} +EXPORT_SYMBOL(slow_work_sleep_till_thread_needed); + /** * slow_work_enqueue - Schedule a slow work item for processing * @work: The work item to queue @@ -335,6 +388,8 @@ auto_requeue: */ int slow_work_enqueue(struct slow_work *work) { + wait_queue_head_t *wfo_wq; + struct list_head *queue; unsigned long flags; int ret; @@ -354,6 +409,14 @@ int slow_work_enqueue(struct slow_work *work) * maintaining our promise */ if (!test_and_set_bit_lock(SLOW_WORK_PENDING, &work->flags)) { + if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) { + wfo_wq = &vslow_work_queue_waits_for_occupation; + queue = &vslow_work_queue; + } else { + wfo_wq = &slow_work_queue_waits_for_occupation; + queue = &slow_work_queue; + } + spin_lock_irqsave(&slow_work_queue_lock, flags); if (unlikely(test_bit(SLOW_WORK_CANCELLING, &work->flags))) @@ -380,11 +443,13 @@ int slow_work_enqueue(struct slow_work *work) if (ret < 0) goto failed; slow_work_mark_time(work); - if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) - list_add_tail(&work->link, &vslow_work_queue); - else - list_add_tail(&work->link, &slow_work_queue); + list_add_tail(&work->link, queue); wake_up(&slow_work_thread_wq); + + /* if someone who could be requeued is sleeping on a + * thread, then ask them to yield their thread */ + if (work->link.prev == queue) + wake_up(wfo_wq); } spin_unlock_irqrestore(&slow_work_queue_lock, flags); @@ -487,9 +552,19 @@ EXPORT_SYMBOL(slow_work_cancel); */ static void delayed_slow_work_timer(unsigned long data) { + wait_queue_head_t *wfo_wq; + struct list_head *queue; struct slow_work *work = (struct slow_work *) data; unsigned long flags; - bool queued = false, put = false; + bool queued = false, put = false, first = false; + + if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) { + wfo_wq = &vslow_work_queue_waits_for_occupation; + queue = &vslow_work_queue; + } else { + wfo_wq = &slow_work_queue_waits_for_occupation; + queue = &slow_work_queue; + } spin_lock_irqsave(&slow_work_queue_lock, flags); if (likely(!test_bit(SLOW_WORK_CANCELLING, &work->flags))) { @@ -502,17 +577,18 @@ static void delayed_slow_work_timer(unsigned long data) put = true; } else { slow_work_mark_time(work); - if (test_bit(SLOW_WORK_VERY_SLOW, &work->flags)) - list_add_tail(&work->link, &vslow_work_queue); - else - list_add_tail(&work->link, &slow_work_queue); + list_add_tail(&work->link, queue); queued = true; + if (work->link.prev == queue) + first = true; } } spin_unlock_irqrestore(&slow_work_queue_lock, flags); if (put) slow_work_put_ref(work); + if (first) + wake_up(wfo_wq); if (queued) wake_up(&slow_work_thread_wq); } -- GitLab From 440f0affe247e9990c8f8778f1861da4fd7d5e50 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:01 +0000 Subject: [PATCH 0953/1165] FS-Cache: Annotate slow-work runqueue proc lines for FS-Cache work items Annotate slow-work runqueue proc lines for FS-Cache work items. Objects include the object ID and the state. Operations include the object ID, the operation ID and the operation type and state. Signed-off-by: David Howells --- fs/fscache/object.c | 41 ++++++++++++++++++++++++++++++++++- fs/fscache/operation.c | 29 +++++++++++++++++++++++++ fs/fscache/page.c | 27 ++++++++++++++++++----- include/linux/fscache-cache.h | 12 ++++++++++ 4 files changed, 103 insertions(+), 6 deletions(-) diff --git a/fs/fscache/object.c b/fs/fscache/object.c index d236eb1d6f3..615b63dd9ec 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -14,9 +14,10 @@ #define FSCACHE_DEBUG_LEVEL COOKIE #include +#include #include "internal.h" -const char *fscache_object_states[] = { +const char *fscache_object_states[FSCACHE_OBJECT__NSTATES] = { [FSCACHE_OBJECT_INIT] = "OBJECT_INIT", [FSCACHE_OBJECT_LOOKING_UP] = "OBJECT_LOOKING_UP", [FSCACHE_OBJECT_CREATING] = "OBJECT_CREATING", @@ -33,9 +34,28 @@ const char *fscache_object_states[] = { }; EXPORT_SYMBOL(fscache_object_states); +static const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5] = { + [FSCACHE_OBJECT_INIT] = "INIT", + [FSCACHE_OBJECT_LOOKING_UP] = "LOOK", + [FSCACHE_OBJECT_CREATING] = "CRTN", + [FSCACHE_OBJECT_AVAILABLE] = "AVBL", + [FSCACHE_OBJECT_ACTIVE] = "ACTV", + [FSCACHE_OBJECT_UPDATING] = "UPDT", + [FSCACHE_OBJECT_DYING] = "DYNG", + [FSCACHE_OBJECT_LC_DYING] = "LCDY", + [FSCACHE_OBJECT_ABORT_INIT] = "ABTI", + [FSCACHE_OBJECT_RELEASING] = "RELS", + [FSCACHE_OBJECT_RECYCLING] = "RCYC", + [FSCACHE_OBJECT_WITHDRAWING] = "WTHD", + [FSCACHE_OBJECT_DEAD] = "DEAD", +}; + static void fscache_object_slow_work_put_ref(struct slow_work *); static int fscache_object_slow_work_get_ref(struct slow_work *); static void fscache_object_slow_work_execute(struct slow_work *); +#ifdef CONFIG_SLOW_WORK_PROC +static void fscache_object_slow_work_desc(struct slow_work *, struct seq_file *); +#endif static void fscache_initialise_object(struct fscache_object *); static void fscache_lookup_object(struct fscache_object *); static void fscache_object_available(struct fscache_object *); @@ -49,6 +69,9 @@ const struct slow_work_ops fscache_object_slow_work_ops = { .get_ref = fscache_object_slow_work_get_ref, .put_ref = fscache_object_slow_work_put_ref, .execute = fscache_object_slow_work_execute, +#ifdef CONFIG_SLOW_WORK_PROC + .desc = fscache_object_slow_work_desc, +#endif }; EXPORT_SYMBOL(fscache_object_slow_work_ops); @@ -326,6 +349,22 @@ static void fscache_object_slow_work_execute(struct slow_work *work) fscache_enqueue_object(object); } +/* + * describe an object for slow-work debugging + */ +#ifdef CONFIG_SLOW_WORK_PROC +static void fscache_object_slow_work_desc(struct slow_work *work, + struct seq_file *m) +{ + struct fscache_object *object = + container_of(work, struct fscache_object, work); + + seq_printf(m, "FSC: OBJ%x: %s", + object->debug_id, + fscache_object_states_short[object->state]); +} +#endif + /* * initialise an object * - check the specified object's parent to see if we can make use of it diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index f1a2857b2ff..91bbe6f0377 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -13,6 +13,7 @@ #define FSCACHE_DEBUG_LEVEL OPERATION #include +#include #include "internal.h" atomic_t fscache_op_debug_id; @@ -31,6 +32,8 @@ void fscache_enqueue_operation(struct fscache_operation *op) _enter("{OBJ%x OP%x,%u}", op->object->debug_id, op->debug_id, atomic_read(&op->usage)); + fscache_set_op_state(op, "EnQ"); + ASSERT(op->processor != NULL); ASSERTCMP(op->object->state, >=, FSCACHE_OBJECT_AVAILABLE); ASSERTCMP(atomic_read(&op->usage), >, 0); @@ -67,6 +70,8 @@ EXPORT_SYMBOL(fscache_enqueue_operation); static void fscache_run_op(struct fscache_object *object, struct fscache_operation *op) { + fscache_set_op_state(op, "Run"); + object->n_in_progress++; if (test_and_clear_bit(FSCACHE_OP_WAITING, &op->flags)) wake_up_bit(&op->flags, FSCACHE_OP_WAITING); @@ -87,6 +92,8 @@ int fscache_submit_exclusive_op(struct fscache_object *object, _enter("{OBJ%x OP%x},", object->debug_id, op->debug_id); + fscache_set_op_state(op, "SubmitX"); + spin_lock(&object->lock); ASSERTCMP(object->n_ops, >=, object->n_in_progress); ASSERTCMP(object->n_ops, >=, object->n_exclusive); @@ -190,6 +197,8 @@ int fscache_submit_op(struct fscache_object *object, ASSERTCMP(atomic_read(&op->usage), >, 0); + fscache_set_op_state(op, "Submit"); + spin_lock(&object->lock); ASSERTCMP(object->n_ops, >=, object->n_in_progress); ASSERTCMP(object->n_ops, >=, object->n_exclusive); @@ -298,6 +307,8 @@ void fscache_put_operation(struct fscache_operation *op) if (!atomic_dec_and_test(&op->usage)) return; + fscache_set_op_state(op, "Put"); + _debug("PUT OP"); if (test_and_set_bit(FSCACHE_OP_DEAD, &op->flags)) BUG(); @@ -452,9 +463,27 @@ static void fscache_op_execute(struct slow_work *work) _leave(""); } +/* + * describe an operation for slow-work debugging + */ +#ifdef CONFIG_SLOW_WORK_PROC +static void fscache_op_desc(struct slow_work *work, struct seq_file *m) +{ + struct fscache_operation *op = + container_of(work, struct fscache_operation, slow_work); + + seq_printf(m, "FSC: OBJ%x OP%x: %s/%s fl=%lx", + op->object->debug_id, op->debug_id, + op->name, op->state, op->flags); +} +#endif + const struct slow_work_ops fscache_op_slow_work_ops = { .owner = THIS_MODULE, .get_ref = fscache_op_get_ref, .put_ref = fscache_op_put_ref, .execute = fscache_op_execute, +#ifdef CONFIG_SLOW_WORK_PROC + .desc = fscache_op_desc, +#endif }; diff --git a/fs/fscache/page.c b/fs/fscache/page.c index 2568e0eb644..e8bbc395cef 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -63,14 +63,19 @@ static void fscache_end_page_write(struct fscache_cookie *cookie, struct page *p static void fscache_attr_changed_op(struct fscache_operation *op) { struct fscache_object *object = op->object; + int ret; _enter("{OBJ%x OP%x}", object->debug_id, op->debug_id); fscache_stat(&fscache_n_attr_changed_calls); - if (fscache_object_is_active(object) && - object->cache->ops->attr_changed(object) < 0) - fscache_abort_object(object); + if (fscache_object_is_active(object)) { + fscache_set_op_state(op, "CallFS"); + ret = object->cache->ops->attr_changed(object); + fscache_set_op_state(op, "Done"); + if (ret < 0) + fscache_abort_object(object); + } _leave(""); } @@ -99,6 +104,7 @@ int __fscache_attr_changed(struct fscache_cookie *cookie) fscache_operation_init(op, NULL); fscache_operation_init_slow(op, fscache_attr_changed_op); op->flags = FSCACHE_OP_SLOW | (1 << FSCACHE_OP_EXCLUSIVE); + fscache_set_op_name(op, "Attr"); spin_lock(&cookie->lock); @@ -184,6 +190,7 @@ static struct fscache_retrieval *fscache_alloc_retrieval( op->start_time = jiffies; INIT_WORK(&op->op.fast_work, fscache_retrieval_work); INIT_LIST_HEAD(&op->to_do); + fscache_set_op_name(&op->op, "Retr"); return op; } @@ -257,6 +264,7 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, _leave(" = -ENOMEM"); return -ENOMEM; } + fscache_set_op_name(&op->op, "RetrRA1"); spin_lock(&cookie->lock); @@ -369,6 +377,7 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, op = fscache_alloc_retrieval(mapping, end_io_func, context); if (!op) return -ENOMEM; + fscache_set_op_name(&op->op, "RetrRAN"); spin_lock(&cookie->lock); @@ -461,6 +470,7 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, op = fscache_alloc_retrieval(page->mapping, NULL, NULL); if (!op) return -ENOMEM; + fscache_set_op_name(&op->op, "RetrAL1"); spin_lock(&cookie->lock); @@ -529,6 +539,8 @@ static void fscache_write_op(struct fscache_operation *_op) _enter("{OP%x,%d}", op->op.debug_id, atomic_read(&op->op.usage)); + fscache_set_op_state(&op->op, "GetPage"); + spin_lock(&cookie->lock); spin_lock(&object->lock); @@ -559,13 +571,17 @@ static void fscache_write_op(struct fscache_operation *_op) spin_unlock(&cookie->lock); if (page) { + fscache_set_op_state(&op->op, "Store"); ret = object->cache->ops->write_page(op, page); + fscache_set_op_state(&op->op, "EndWrite"); fscache_end_page_write(cookie, page); page_cache_release(page); - if (ret < 0) + if (ret < 0) { + fscache_set_op_state(&op->op, "Abort"); fscache_abort_object(object); - else + } else { fscache_enqueue_operation(&op->op); + } } _leave(""); @@ -634,6 +650,7 @@ int __fscache_write_page(struct fscache_cookie *cookie, fscache_operation_init(&op->op, fscache_release_write_op); fscache_operation_init_slow(&op->op, fscache_write_op); op->op.flags = FSCACHE_OP_SLOW | (1 << FSCACHE_OP_WAITING); + fscache_set_op_name(&op->op, "Write1"); ret = radix_tree_preload(gfp & ~__GFP_HIGHMEM); if (ret < 0) diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 84d3532dd3e..7a9847ccd19 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -102,6 +102,16 @@ struct fscache_operation { /* operation releaser */ fscache_operation_release_t release; + +#ifdef CONFIG_SLOW_WORK_PROC + const char *name; /* operation name */ + const char *state; /* operation state */ +#define fscache_set_op_name(OP, N) do { (OP)->name = (N); } while(0) +#define fscache_set_op_state(OP, S) do { (OP)->state = (S); } while(0) +#else +#define fscache_set_op_name(OP, N) do { } while(0) +#define fscache_set_op_state(OP, S) do { } while(0) +#endif }; extern atomic_t fscache_op_debug_id; @@ -125,6 +135,7 @@ static inline void fscache_operation_init(struct fscache_operation *op, op->debug_id = atomic_inc_return(&fscache_op_debug_id); op->release = release; INIT_LIST_HEAD(&op->pend_link); + fscache_set_op_state(op, "Init"); } /** @@ -337,6 +348,7 @@ struct fscache_object { FSCACHE_OBJECT_RECYCLING, /* retiring object */ FSCACHE_OBJECT_WITHDRAWING, /* withdrawing object */ FSCACHE_OBJECT_DEAD, /* object is now dead */ + FSCACHE_OBJECT__NSTATES } state; int debug_id; /* debugging ID */ -- GitLab From 4fbf4291aa15926cd4fdca0ffe9122e89d0459db Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:04 +0000 Subject: [PATCH 0954/1165] FS-Cache: Allow the current state of all objects to be dumped Allow the current state of all fscache objects to be dumped by doing: cat /proc/fs/fscache/objects By default, all objects and all fields will be shown. This can be restricted by adding a suitable key to one of the caller's keyrings (such as the session keyring): keyctl add user fscache:objlist "" @s The are: K Show hexdump of object key (don't show if not given) A Show hexdump of object aux data (don't show if not given) And paired restrictions: C Show objects that have a cookie c Show objects that don't have a cookie B Show objects that are busy b Show objects that aren't busy W Show objects that have pending writes w Show objects that don't have pending writes R Show objects that have outstanding reads r Show objects that don't have outstanding reads S Show objects that have slow work queued s Show objects that don't have slow work queued If neither side of a restriction pair is given, then both are implied. For example: keyctl add user fscache:objlist KB @s shows objects that are busy, and lists their object keys, but does not dump their auxiliary data. It also implies "CcWwRrSs", but as 'B' is given, 'b' is not implied. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 81 ++++ fs/cachefiles/interface.c | 1 + fs/cachefiles/rdwr.c | 6 +- fs/fscache/Kconfig | 7 + fs/fscache/Makefile | 1 + fs/fscache/cache.c | 1 + fs/fscache/cookie.c | 2 + fs/fscache/internal.h | 13 + fs/fscache/object-list.c | 432 ++++++++++++++++++ fs/fscache/object.c | 2 +- fs/fscache/operation.c | 3 + fs/fscache/page.c | 6 + fs/fscache/proc.c | 13 + include/linux/fscache-cache.h | 13 + 14 files changed, 578 insertions(+), 3 deletions(-) create mode 100644 fs/fscache/object-list.c diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 9e94b9491d8..cac09e11ca3 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -299,6 +299,87 @@ proc files. jiffy range covered, and the SECS field the equivalent number of seconds. +=========== +OBJECT LIST +=========== + +If CONFIG_FSCACHE_OBJECT_LIST is enabled, the FS-Cache facility will maintain a +list of all the objects currently allocated and allow them to be viewed +through: + + /proc/fs/fscache/objects + +This will look something like: + + [root@andromeda ~]# head /proc/fs/fscache/objects + OBJECT PARENT STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA OBJECT_KEY, AUX_DATA + ======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================ + 17e4b 2 ACTV 0 0 0 0 0 0 7b 4 0 8 | NFS.fh DT 0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a + 1693a 2 ACTV 0 0 0 0 0 0 7b 4 0 8 | NFS.fh DT 0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a + +where the first set of columns before the '|' describe the object: + + COLUMN DESCRIPTION + ======= =============================================================== + OBJECT Object debugging ID (appears as OBJ%x in some debug messages) + PARENT Debugging ID of parent object + STAT Object state + CHLDN Number of child objects of this object + OPS Number of outstanding operations on this object + OOP Number of outstanding child object management operations + IPR + EX Number of outstanding exclusive operations + READS Number of outstanding read operations + EM Object's event mask + EV Events raised on this object + F Object flags + S Object slow-work work item flags + +and the second set of columns describe the object's cookie, if present: + + COLUMN DESCRIPTION + =============== ======================================================= + NETFS_COOKIE_DEF Name of netfs cookie definition + TY Cookie type (IX - index, DT - data, hex - special) + FL Cookie flags + NETFS_DATA Netfs private data stored in the cookie + OBJECT_KEY Object key } 1 column, with separating comma + AUX_DATA Object aux data } presence may be configured + +The data shown may be filtered by attaching the a key to an appropriate keyring +before viewing the file. Something like: + + keyctl add user fscache:objlist @s + +where are a selection of the following letters: + + K Show hexdump of object key (don't show if not given) + A Show hexdump of object aux data (don't show if not given) + +and the following paired letters: + + C Show objects that have a cookie + c Show objects that don't have a cookie + B Show objects that are busy + b Show objects that aren't busy + W Show objects that have pending writes + w Show objects that don't have pending writes + R Show objects that have outstanding reads + r Show objects that don't have outstanding reads + S Show objects that have slow work queued + s Show objects that don't have slow work queued + +If neither side of a letter pair is given, then both are implied. For example: + + keyctl add user fscache:objlist KB @s + +shows objects that are busy, and lists their object keys, but does not dump +their auxiliary data. It also implies "CcWwRrSs", but as 'B' is given, 'b' is +not implied. + +By default all objects and all fields will be shown. + + ========= DEBUGGING ========= diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c index 431accd475a..dd7f852746c 100644 --- a/fs/cachefiles/interface.c +++ b/fs/cachefiles/interface.c @@ -331,6 +331,7 @@ static void cachefiles_put_object(struct fscache_object *_object) } cache = object->fscache.cache; + fscache_object_destroy(&object->fscache); kmem_cache_free(cachefiles_object_jar, object); fscache_object_destroyed(cache); } diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index a69787e7dd9..3304646dae8 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -333,7 +333,8 @@ int cachefiles_read_or_alloc_page(struct fscache_retrieval *op, shift = PAGE_SHIFT - inode->i_sb->s_blocksize_bits; - op->op.flags = FSCACHE_OP_FAST; + op->op.flags &= FSCACHE_OP_KEEP_FLAGS; + op->op.flags |= FSCACHE_OP_FAST; op->op.processor = cachefiles_read_copier; pagevec_init(&pagevec, 0); @@ -639,7 +640,8 @@ int cachefiles_read_or_alloc_pages(struct fscache_retrieval *op, pagevec_init(&pagevec, 0); - op->op.flags = FSCACHE_OP_FAST; + op->op.flags &= FSCACHE_OP_KEEP_FLAGS; + op->op.flags |= FSCACHE_OP_FAST; op->op.processor = cachefiles_read_copier; INIT_LIST_HEAD(&backpages); diff --git a/fs/fscache/Kconfig b/fs/fscache/Kconfig index 9bbb8ce7bea..864dac20a24 100644 --- a/fs/fscache/Kconfig +++ b/fs/fscache/Kconfig @@ -54,3 +54,10 @@ config FSCACHE_DEBUG enabled by setting bits in /sys/modules/fscache/parameter/debug. See Documentation/filesystems/caching/fscache.txt for more information. + +config FSCACHE_OBJECT_LIST + bool "Maintain global object list for debugging purposes" + depends on FSCACHE && PROC_FS + help + Maintain a global list of active fscache objects that can be + retrieved through /proc/fs/fscache/objects for debugging purposes diff --git a/fs/fscache/Makefile b/fs/fscache/Makefile index 91571b95aac..6d561531cb3 100644 --- a/fs/fscache/Makefile +++ b/fs/fscache/Makefile @@ -15,5 +15,6 @@ fscache-y := \ fscache-$(CONFIG_PROC_FS) += proc.o fscache-$(CONFIG_FSCACHE_STATS) += stats.o fscache-$(CONFIG_FSCACHE_HISTOGRAM) += histogram.o +fscache-$(CONFIG_FSCACHE_OBJECT_LIST) += object-list.o obj-$(CONFIG_FSCACHE) := fscache.o diff --git a/fs/fscache/cache.c b/fs/fscache/cache.c index e21985bbb1f..724384ef96d 100644 --- a/fs/fscache/cache.c +++ b/fs/fscache/cache.c @@ -263,6 +263,7 @@ int fscache_add_cache(struct fscache_cache *cache, spin_lock(&cache->object_list_lock); list_add_tail(&ifsdef->cache_link, &cache->object_list); spin_unlock(&cache->object_list_lock); + fscache_objlist_add(ifsdef); /* add the cache's netfs definition index object to the top level index * cookie as a known backing object */ diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index 72fd18f6c71..9b518732823 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -349,6 +349,8 @@ static int fscache_attach_object(struct fscache_cookie *cookie, object->cookie = cookie; atomic_inc(&cookie->usage); hlist_add_head(&object->cookie_link, &cookie->backing_objects); + + fscache_objlist_add(object); ret = 0; cant_attach_object: diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index 1c341304621..fe02973a951 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -88,10 +88,23 @@ extern int fscache_wait_bit_interruptible(void *); /* * object.c */ +extern const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5]; + extern void fscache_withdrawing_object(struct fscache_cache *, struct fscache_object *); extern void fscache_enqueue_object(struct fscache_object *); +/* + * object-list.c + */ +#ifdef CONFIG_FSCACHE_OBJECT_LIST +extern const struct file_operations fscache_objlist_fops; + +extern void fscache_objlist_add(struct fscache_object *); +#else +#define fscache_objlist_add(object) do {} while(0) +#endif + /* * operation.c */ diff --git a/fs/fscache/object-list.c b/fs/fscache/object-list.c new file mode 100644 index 00000000000..e590242fa41 --- /dev/null +++ b/fs/fscache/object-list.c @@ -0,0 +1,432 @@ +/* Global fscache object list maintainer and viewer + * + * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public Licence + * as published by the Free Software Foundation; either version + * 2 of the Licence, or (at your option) any later version. + */ + +#define FSCACHE_DEBUG_LEVEL COOKIE +#include +#include +#include +#include +#include "internal.h" + +static struct rb_root fscache_object_list; +static DEFINE_RWLOCK(fscache_object_list_lock); + +struct fscache_objlist_data { + unsigned long config; /* display configuration */ +#define FSCACHE_OBJLIST_CONFIG_KEY 0x00000001 /* show object keys */ +#define FSCACHE_OBJLIST_CONFIG_AUX 0x00000002 /* show object auxdata */ +#define FSCACHE_OBJLIST_CONFIG_COOKIE 0x00000004 /* show objects with cookies */ +#define FSCACHE_OBJLIST_CONFIG_NOCOOKIE 0x00000008 /* show objects without cookies */ +#define FSCACHE_OBJLIST_CONFIG_BUSY 0x00000010 /* show busy objects */ +#define FSCACHE_OBJLIST_CONFIG_IDLE 0x00000020 /* show idle objects */ +#define FSCACHE_OBJLIST_CONFIG_PENDWR 0x00000040 /* show objects with pending writes */ +#define FSCACHE_OBJLIST_CONFIG_NOPENDWR 0x00000080 /* show objects without pending writes */ +#define FSCACHE_OBJLIST_CONFIG_READS 0x00000100 /* show objects with active reads */ +#define FSCACHE_OBJLIST_CONFIG_NOREADS 0x00000200 /* show objects without active reads */ +#define FSCACHE_OBJLIST_CONFIG_EVENTS 0x00000400 /* show objects with events */ +#define FSCACHE_OBJLIST_CONFIG_NOEVENTS 0x00000800 /* show objects without no events */ +#define FSCACHE_OBJLIST_CONFIG_WORK 0x00001000 /* show objects with slow work */ +#define FSCACHE_OBJLIST_CONFIG_NOWORK 0x00002000 /* show objects without slow work */ + + u8 buf[512]; /* key and aux data buffer */ +}; + +/* + * Add an object to the object list + * - we use the address of the fscache_object structure as the key into the + * tree + */ +void fscache_objlist_add(struct fscache_object *obj) +{ + struct fscache_object *xobj; + struct rb_node **p = &fscache_object_list.rb_node, *parent = NULL; + + write_lock(&fscache_object_list_lock); + + while (*p) { + parent = *p; + xobj = rb_entry(parent, struct fscache_object, objlist_link); + + if (obj < xobj) + p = &(*p)->rb_left; + else if (obj > xobj) + p = &(*p)->rb_right; + else + BUG(); + } + + rb_link_node(&obj->objlist_link, parent, p); + rb_insert_color(&obj->objlist_link, &fscache_object_list); + + write_unlock(&fscache_object_list_lock); +} + +/** + * fscache_object_destroy - Note that a cache object is about to be destroyed + * @object: The object to be destroyed + * + * Note the imminent destruction and deallocation of a cache object record. + */ +void fscache_object_destroy(struct fscache_object *obj) +{ + write_lock(&fscache_object_list_lock); + + BUG_ON(RB_EMPTY_ROOT(&fscache_object_list)); + rb_erase(&obj->objlist_link, &fscache_object_list); + + write_unlock(&fscache_object_list_lock); +} +EXPORT_SYMBOL(fscache_object_destroy); + +/* + * find the object in the tree on or after the specified index + */ +static struct fscache_object *fscache_objlist_lookup(loff_t *_pos) +{ + struct fscache_object *pobj, *obj, *minobj = NULL; + struct rb_node *p; + unsigned long pos; + + if (*_pos >= (unsigned long) ERR_PTR(-ENOENT)) + return NULL; + pos = *_pos; + + /* banners (can't represent line 0 by pos 0 as that would involve + * returning a NULL pointer) */ + if (pos == 0) + return (struct fscache_object *) ++(*_pos); + if (pos < 3) + return (struct fscache_object *)pos; + + pobj = (struct fscache_object *)pos; + p = fscache_object_list.rb_node; + while (p) { + obj = rb_entry(p, struct fscache_object, objlist_link); + if (pobj < obj) { + if (!minobj || minobj > obj) + minobj = obj; + p = p->rb_left; + } else if (pobj > obj) { + p = p->rb_right; + } else { + minobj = obj; + break; + } + obj = NULL; + } + + if (!minobj) + *_pos = (unsigned long) ERR_PTR(-ENOENT); + else if (minobj != obj) + *_pos = (unsigned long) minobj; + return minobj; +} + +/* + * set up the iterator to start reading from the first line + */ +static void *fscache_objlist_start(struct seq_file *m, loff_t *_pos) + __acquires(&fscache_object_list_lock) +{ + read_lock(&fscache_object_list_lock); + return fscache_objlist_lookup(_pos); +} + +/* + * move to the next line + */ +static void *fscache_objlist_next(struct seq_file *m, void *v, loff_t *_pos) +{ + (*_pos)++; + return fscache_objlist_lookup(_pos); +} + +/* + * clean up after reading + */ +static void fscache_objlist_stop(struct seq_file *m, void *v) + __releases(&fscache_object_list_lock) +{ + read_unlock(&fscache_object_list_lock); +} + +/* + * display an object + */ +static int fscache_objlist_show(struct seq_file *m, void *v) +{ + struct fscache_objlist_data *data = m->private; + struct fscache_object *obj = v; + unsigned long config = data->config; + uint16_t keylen, auxlen; + char _type[3], *type; + bool no_cookie; + u8 *buf = data->buf, *p; + + if ((unsigned long) v == 1) { + seq_puts(m, "OBJECT PARENT STAT CHLDN OPS OOP IPR EX READS" + " EM EV F S" + " | NETFS_COOKIE_DEF TY FL NETFS_DATA"); + if (config & (FSCACHE_OBJLIST_CONFIG_KEY | + FSCACHE_OBJLIST_CONFIG_AUX)) + seq_puts(m, " "); + if (config & FSCACHE_OBJLIST_CONFIG_KEY) + seq_puts(m, "OBJECT_KEY"); + if ((config & (FSCACHE_OBJLIST_CONFIG_KEY | + FSCACHE_OBJLIST_CONFIG_AUX)) == + (FSCACHE_OBJLIST_CONFIG_KEY | FSCACHE_OBJLIST_CONFIG_AUX)) + seq_puts(m, ", "); + if (config & FSCACHE_OBJLIST_CONFIG_AUX) + seq_puts(m, "AUX_DATA"); + seq_puts(m, "\n"); + return 0; + } + + if ((unsigned long) v == 2) { + seq_puts(m, "======== ======== ==== ===== === === === == =====" + " == == = =" + " | ================ == == ================"); + if (config & (FSCACHE_OBJLIST_CONFIG_KEY | + FSCACHE_OBJLIST_CONFIG_AUX)) + seq_puts(m, " ================"); + seq_puts(m, "\n"); + return 0; + } + + /* filter out any unwanted objects */ +#define FILTER(criterion, _yes, _no) \ + do { \ + unsigned long yes = FSCACHE_OBJLIST_CONFIG_##_yes; \ + unsigned long no = FSCACHE_OBJLIST_CONFIG_##_no; \ + if (criterion) { \ + if (!(config & yes)) \ + return 0; \ + } else { \ + if (!(config & no)) \ + return 0; \ + } \ + } while(0) + + if (~config) { + FILTER(obj->cookie, + COOKIE, NOCOOKIE); + FILTER(obj->state != FSCACHE_OBJECT_ACTIVE || + obj->n_ops != 0 || + obj->n_obj_ops != 0 || + obj->flags || + !list_empty(&obj->dependents), + BUSY, IDLE); + FILTER(test_bit(FSCACHE_OBJECT_PENDING_WRITE, &obj->flags), + PENDWR, NOPENDWR); + FILTER(atomic_read(&obj->n_reads), + READS, NOREADS); + FILTER(obj->events & obj->event_mask, + EVENTS, NOEVENTS); + FILTER(obj->work.flags & ~(1UL << SLOW_WORK_VERY_SLOW), + WORK, NOWORK); + } + + seq_printf(m, + "%8x %8x %s %5u %3u %3u %3u %2u %5u %2lx %2lx %1lx %1lx | ", + obj->debug_id, + obj->parent ? obj->parent->debug_id : -1, + fscache_object_states_short[obj->state], + obj->n_children, + obj->n_ops, + obj->n_obj_ops, + obj->n_in_progress, + obj->n_exclusive, + atomic_read(&obj->n_reads), + obj->event_mask & FSCACHE_OBJECT_EVENTS_MASK, + obj->events, + obj->flags, + obj->work.flags); + + no_cookie = true; + keylen = auxlen = 0; + if (obj->cookie) { + spin_lock(&obj->lock); + if (obj->cookie) { + switch (obj->cookie->def->type) { + case 0: + type = "IX"; + break; + case 1: + type = "DT"; + break; + default: + sprintf(_type, "%02u", + obj->cookie->def->type); + type = _type; + break; + } + + seq_printf(m, "%-16s %s %2lx %16p", + obj->cookie->def->name, + type, + obj->cookie->flags, + obj->cookie->netfs_data); + + if (obj->cookie->def->get_key && + config & FSCACHE_OBJLIST_CONFIG_KEY) + keylen = obj->cookie->def->get_key( + obj->cookie->netfs_data, + buf, 400); + + if (obj->cookie->def->get_aux && + config & FSCACHE_OBJLIST_CONFIG_AUX) + auxlen = obj->cookie->def->get_aux( + obj->cookie->netfs_data, + buf + keylen, 512 - keylen); + + no_cookie = false; + } + spin_unlock(&obj->lock); + + if (!no_cookie && (keylen > 0 || auxlen > 0)) { + seq_printf(m, " "); + for (p = buf; keylen > 0; keylen--) + seq_printf(m, "%02x", *p++); + if (auxlen > 0) { + if (config & FSCACHE_OBJLIST_CONFIG_KEY) + seq_printf(m, ", "); + for (; auxlen > 0; auxlen--) + seq_printf(m, "%02x", *p++); + } + } + } + + if (no_cookie) + seq_printf(m, "\n"); + else + seq_printf(m, "\n"); + return 0; +} + +static const struct seq_operations fscache_objlist_ops = { + .start = fscache_objlist_start, + .stop = fscache_objlist_stop, + .next = fscache_objlist_next, + .show = fscache_objlist_show, +}; + +/* + * get the configuration for filtering the list + */ +static void fscache_objlist_config(struct fscache_objlist_data *data) +{ +#ifdef CONFIG_KEYS + struct user_key_payload *confkey; + unsigned long config; + struct key *key; + const char *buf; + int len; + + key = request_key(&key_type_user, "fscache:objlist", NULL); + if (IS_ERR(key)) + goto no_config; + + config = 0; + rcu_read_lock(); + + confkey = key->payload.data; + buf = confkey->data; + + for (len = confkey->datalen - 1; len >= 0; len--) { + switch (buf[len]) { + case 'K': config |= FSCACHE_OBJLIST_CONFIG_KEY; break; + case 'A': config |= FSCACHE_OBJLIST_CONFIG_AUX; break; + case 'C': config |= FSCACHE_OBJLIST_CONFIG_COOKIE; break; + case 'c': config |= FSCACHE_OBJLIST_CONFIG_NOCOOKIE; break; + case 'B': config |= FSCACHE_OBJLIST_CONFIG_BUSY; break; + case 'b': config |= FSCACHE_OBJLIST_CONFIG_IDLE; break; + case 'W': config |= FSCACHE_OBJLIST_CONFIG_PENDWR; break; + case 'w': config |= FSCACHE_OBJLIST_CONFIG_NOPENDWR; break; + case 'R': config |= FSCACHE_OBJLIST_CONFIG_READS; break; + case 'r': config |= FSCACHE_OBJLIST_CONFIG_NOREADS; break; + case 'S': config |= FSCACHE_OBJLIST_CONFIG_WORK; break; + case 's': config |= FSCACHE_OBJLIST_CONFIG_NOWORK; break; + } + } + + rcu_read_unlock(); + key_put(key); + + if (!(config & (FSCACHE_OBJLIST_CONFIG_COOKIE | FSCACHE_OBJLIST_CONFIG_NOCOOKIE))) + config |= FSCACHE_OBJLIST_CONFIG_COOKIE | FSCACHE_OBJLIST_CONFIG_NOCOOKIE; + if (!(config & (FSCACHE_OBJLIST_CONFIG_BUSY | FSCACHE_OBJLIST_CONFIG_IDLE))) + config |= FSCACHE_OBJLIST_CONFIG_BUSY | FSCACHE_OBJLIST_CONFIG_IDLE; + if (!(config & (FSCACHE_OBJLIST_CONFIG_PENDWR | FSCACHE_OBJLIST_CONFIG_NOPENDWR))) + config |= FSCACHE_OBJLIST_CONFIG_PENDWR | FSCACHE_OBJLIST_CONFIG_NOPENDWR; + if (!(config & (FSCACHE_OBJLIST_CONFIG_READS | FSCACHE_OBJLIST_CONFIG_NOREADS))) + config |= FSCACHE_OBJLIST_CONFIG_READS | FSCACHE_OBJLIST_CONFIG_NOREADS; + if (!(config & (FSCACHE_OBJLIST_CONFIG_EVENTS | FSCACHE_OBJLIST_CONFIG_NOEVENTS))) + config |= FSCACHE_OBJLIST_CONFIG_EVENTS | FSCACHE_OBJLIST_CONFIG_NOEVENTS; + if (!(config & (FSCACHE_OBJLIST_CONFIG_WORK | FSCACHE_OBJLIST_CONFIG_NOWORK))) + config |= FSCACHE_OBJLIST_CONFIG_WORK | FSCACHE_OBJLIST_CONFIG_NOWORK; + + data->config = config; + return; + +no_config: +#endif + data->config = ULONG_MAX; +} + +/* + * open "/proc/fs/fscache/objects" to provide a list of active objects + * - can be configured by a user-defined key added to the caller's keyrings + */ +static int fscache_objlist_open(struct inode *inode, struct file *file) +{ + struct fscache_objlist_data *data; + struct seq_file *m; + int ret; + + ret = seq_open(file, &fscache_objlist_ops); + if (ret < 0) + return ret; + + m = file->private_data; + + /* buffer for key extraction */ + data = kmalloc(sizeof(struct fscache_objlist_data), GFP_KERNEL); + if (!data) { + seq_release(inode, file); + return -ENOMEM; + } + + /* get the configuration key */ + fscache_objlist_config(data); + + m->private = data; + return 0; +} + +/* + * clean up on close + */ +static int fscache_objlist_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = file->private_data; + + kfree(m->private); + m->private = NULL; + return seq_release(inode, file); +} + +const struct file_operations fscache_objlist_fops = { + .owner = THIS_MODULE, + .open = fscache_objlist_open, + .read = seq_read, + .llseek = seq_lseek, + .release = fscache_objlist_release, +}; diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 615b63dd9ec..ad1644f073b 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -34,7 +34,7 @@ const char *fscache_object_states[FSCACHE_OBJECT__NSTATES] = { }; EXPORT_SYMBOL(fscache_object_states); -static const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5] = { +const char fscache_object_states_short[FSCACHE_OBJECT__NSTATES][5] = { [FSCACHE_OBJECT_INIT] = "INIT", [FSCACHE_OBJECT_LOOKING_UP] = "LOOK", [FSCACHE_OBJECT_CREATING] = "CRTN", diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index 91bbe6f0377..09e43b6e822 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -322,6 +322,9 @@ void fscache_put_operation(struct fscache_operation *op) object = op->object; + if (test_bit(FSCACHE_OP_DEC_READ_CNT, &op->flags)) + atomic_dec(&object->n_reads); + /* now... we may get called with the object spinlock held, so we * complete the cleanup here only if we can immediately acquire the * lock, and defer it otherwise */ diff --git a/fs/fscache/page.c b/fs/fscache/page.c index e8bbc395cef..c5973e38ce3 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -275,6 +275,9 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, ASSERTCMP(object->state, >, FSCACHE_OBJECT_LOOKING_UP); + atomic_inc(&object->n_reads); + set_bit(FSCACHE_OP_DEC_READ_CNT, &op->op.flags); + if (fscache_submit_op(object, &op->op) < 0) goto nobufs_unlock; spin_unlock(&cookie->lock); @@ -386,6 +389,9 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, object = hlist_entry(cookie->backing_objects.first, struct fscache_object, cookie_link); + atomic_inc(&object->n_reads); + set_bit(FSCACHE_OP_DEC_READ_CNT, &op->op.flags); + if (fscache_submit_op(object, &op->op) < 0) goto nobufs_unlock; spin_unlock(&cookie->lock); diff --git a/fs/fscache/proc.c b/fs/fscache/proc.c index beeab44bc31..1d9e4951a59 100644 --- a/fs/fscache/proc.c +++ b/fs/fscache/proc.c @@ -37,10 +37,20 @@ int __init fscache_proc_init(void) goto error_histogram; #endif +#ifdef CONFIG_FSCACHE_OBJECT_LIST + if (!proc_create("fs/fscache/objects", S_IFREG | 0444, NULL, + &fscache_objlist_fops)) + goto error_objects; +#endif + _leave(" = 0"); return 0; +#ifdef CONFIG_FSCACHE_OBJECT_LIST +error_objects: +#endif #ifdef CONFIG_FSCACHE_HISTOGRAM + remove_proc_entry("fs/fscache/histogram", NULL); error_histogram: #endif #ifdef CONFIG_FSCACHE_STATS @@ -58,6 +68,9 @@ error_dir: */ void fscache_proc_cleanup(void) { +#ifdef CONFIG_FSCACHE_OBJECT_LIST + remove_proc_entry("fs/fscache/objects", NULL); +#endif #ifdef CONFIG_FSCACHE_HISTOGRAM remove_proc_entry("fs/fscache/histogram", NULL); #endif diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 7a9847ccd19..184cbdfbcc9 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -91,6 +91,8 @@ struct fscache_operation { #define FSCACHE_OP_WAITING 4 /* cleared when op is woken */ #define FSCACHE_OP_EXCLUSIVE 5 /* exclusive op, other ops must wait */ #define FSCACHE_OP_DEAD 6 /* op is now dead */ +#define FSCACHE_OP_DEC_READ_CNT 7 /* decrement object->n_reads on destruction */ +#define FSCACHE_OP_KEEP_FLAGS 0xc0 /* flags to keep when repurposing an op */ atomic_t usage; unsigned debug_id; /* debugging ID */ @@ -357,6 +359,7 @@ struct fscache_object { int n_obj_ops; /* number of object ops outstanding on object */ int n_in_progress; /* number of ops in progress */ int n_exclusive; /* number of exclusive ops queued */ + atomic_t n_reads; /* number of read ops in progress */ spinlock_t lock; /* state and operations lock */ unsigned long lookup_jif; /* time at which lookup started */ @@ -370,6 +373,7 @@ struct fscache_object { #define FSCACHE_OBJECT_EV_RELEASE 4 /* T if netfs requested object release */ #define FSCACHE_OBJECT_EV_RETIRE 5 /* T if netfs requested object retirement */ #define FSCACHE_OBJECT_EV_WITHDRAW 6 /* T if cache requested object withdrawal */ +#define FSCACHE_OBJECT_EVENTS_MASK 0x7f /* mask of all events*/ unsigned long flags; #define FSCACHE_OBJECT_LOCK 0 /* T if object is busy being processed */ @@ -385,6 +389,9 @@ struct fscache_object { struct list_head dependents; /* FIFO of dependent objects */ struct list_head dep_link; /* link in parent's dependents list */ struct list_head pending_ops; /* unstarted operations on this object */ +#ifdef CONFIG_FSCACHE_OBJECT_LIST + struct rb_node objlist_link; /* link in global object list */ +#endif pgoff_t store_limit; /* current storage limit */ }; @@ -434,6 +441,12 @@ void fscache_object_init(struct fscache_object *object, extern void fscache_object_lookup_negative(struct fscache_object *object); extern void fscache_obtained_object(struct fscache_object *object); +#ifdef CONFIG_FSCACHE_OBJECT_LIST +extern void fscache_object_destroy(struct fscache_object *object); +#else +#define fscache_object_destroy(object) do {} while(0) +#endif + /** * fscache_object_destroyed - Note destruction of an object in a cache * @cache: The cache from which the object came -- GitLab From 52bd75fdb135d6133d878ae60c6e7e3f4ebc1cfc Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:08 +0000 Subject: [PATCH 0955/1165] FS-Cache: Add counters for entry/exit to/from cache operation functions Count entries to and exits from cache operation table functions. Maintain these as a single counter that's added to or removed from as appropriate. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 16 ++++++++ fs/fscache/cache.c | 4 ++ fs/fscache/cookie.c | 9 ++++- fs/fscache/internal.h | 22 +++++++++++ fs/fscache/object.c | 26 ++++++++++++- fs/fscache/page.c | 29 ++++++++++++--- fs/fscache/stats.c | 37 +++++++++++++++++++ 7 files changed, 134 insertions(+), 9 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index cac09e11ca3..b6c32c080ab 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -274,6 +274,22 @@ proc files. dfr=N Number of async ops queued for deferred release rel=N Number of async ops released gc=N Number of deferred-release async ops garbage collected + CacheOp alo=N Number of in-progress alloc_object() cache ops + luo=N Number of in-progress lookup_object() cache ops + luc=N Number of in-progress lookup_complete() cache ops + gro=N Number of in-progress grab_object() cache ops + upo=N Number of in-progress update_object() cache ops + dro=N Number of in-progress drop_object() cache ops + pto=N Number of in-progress put_object() cache ops + syn=N Number of in-progress sync_cache() cache ops + atc=N Number of in-progress attr_changed() cache ops + rap=N Number of in-progress read_or_alloc_page() cache ops + ras=N Number of in-progress read_or_alloc_pages() cache ops + alp=N Number of in-progress allocate_page() cache ops + als=N Number of in-progress allocate_pages() cache ops + wrp=N Number of in-progress write_page() cache ops + ucp=N Number of in-progress uncache_page() cache ops + dsp=N Number of in-progress dissociate_pages() cache ops (*) /proc/fs/fscache/histogram diff --git a/fs/fscache/cache.c b/fs/fscache/cache.c index 724384ef96d..6a3c48abd67 100644 --- a/fs/fscache/cache.c +++ b/fs/fscache/cache.c @@ -381,11 +381,15 @@ void fscache_withdraw_cache(struct fscache_cache *cache) /* make sure all pages pinned by operations on behalf of the netfs are * written to disk */ + fscache_stat(&fscache_n_cop_sync_cache); cache->ops->sync_cache(cache); + fscache_stat_d(&fscache_n_cop_sync_cache); /* dissociate all the netfs pages backed by this cache from the block * mappings in the cache */ + fscache_stat(&fscache_n_cop_dissociate_pages); cache->ops->dissociate_pages(cache); + fscache_stat_d(&fscache_n_cop_dissociate_pages); /* we now have to destroy all the active objects pertaining to this * cache - which we do by passing them off to thread pool to be diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index 9b518732823..432482edc73 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -249,7 +249,9 @@ static int fscache_alloc_object(struct fscache_cache *cache, /* ask the cache to allocate an object (we may end up with duplicate * objects at this stage, but we sort that out later) */ + fscache_stat(&fscache_n_cop_alloc_object); object = cache->ops->alloc_object(cache, cookie); + fscache_stat_d(&fscache_n_cop_alloc_object); if (IS_ERR(object)) { fscache_stat(&fscache_n_object_no_alloc); ret = PTR_ERR(object); @@ -270,8 +272,11 @@ static int fscache_alloc_object(struct fscache_cache *cache, /* only attach if we managed to allocate all we needed, otherwise * discard the object we just allocated and instead use the one * attached to the cookie */ - if (fscache_attach_object(cookie, object) < 0) + if (fscache_attach_object(cookie, object) < 0) { + fscache_stat(&fscache_n_cop_put_object); cache->ops->put_object(object); + fscache_stat_d(&fscache_n_cop_put_object); + } _leave(" = 0"); return 0; @@ -287,7 +292,9 @@ object_already_extant: return 0; error_put: + fscache_stat(&fscache_n_cop_put_object); cache->ops->put_object(object); + fscache_stat_d(&fscache_n_cop_put_object); error: _leave(" = %d", ret); return ret; diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index fe02973a951..b85cc890681 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -208,11 +208,33 @@ extern atomic_t fscache_n_checkaux_okay; extern atomic_t fscache_n_checkaux_update; extern atomic_t fscache_n_checkaux_obsolete; +extern atomic_t fscache_n_cop_alloc_object; +extern atomic_t fscache_n_cop_lookup_object; +extern atomic_t fscache_n_cop_lookup_complete; +extern atomic_t fscache_n_cop_grab_object; +extern atomic_t fscache_n_cop_update_object; +extern atomic_t fscache_n_cop_drop_object; +extern atomic_t fscache_n_cop_put_object; +extern atomic_t fscache_n_cop_sync_cache; +extern atomic_t fscache_n_cop_attr_changed; +extern atomic_t fscache_n_cop_read_or_alloc_page; +extern atomic_t fscache_n_cop_read_or_alloc_pages; +extern atomic_t fscache_n_cop_allocate_page; +extern atomic_t fscache_n_cop_allocate_pages; +extern atomic_t fscache_n_cop_write_page; +extern atomic_t fscache_n_cop_uncache_page; +extern atomic_t fscache_n_cop_dissociate_pages; + static inline void fscache_stat(atomic_t *stat) { atomic_inc(stat); } +static inline void fscache_stat_d(atomic_t *stat) +{ + atomic_dec(stat); +} + extern const struct file_operations fscache_stats_fops; #else diff --git a/fs/fscache/object.c b/fs/fscache/object.c index ad1644f073b..0d65c0c92b4 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -144,13 +144,17 @@ static void fscache_object_state_machine(struct fscache_object *object) case FSCACHE_OBJECT_UPDATING: clear_bit(FSCACHE_OBJECT_EV_UPDATE, &object->events); fscache_stat(&fscache_n_updates_run); + fscache_stat(&fscache_n_cop_update_object); object->cache->ops->update_object(object); + fscache_stat_d(&fscache_n_cop_update_object); goto active_transit; /* handle an object dying during lookup or creation */ case FSCACHE_OBJECT_LC_DYING: object->event_mask &= ~(1 << FSCACHE_OBJECT_EV_UPDATE); + fscache_stat(&fscache_n_cop_lookup_complete); object->cache->ops->lookup_complete(object); + fscache_stat_d(&fscache_n_cop_lookup_complete); spin_lock(&object->lock); object->state = FSCACHE_OBJECT_DYING; @@ -416,7 +420,9 @@ static void fscache_initialise_object(struct fscache_object *object) * binding on to us, so we need to make sure we don't * add ourself to the list multiple times */ if (list_empty(&object->dep_link)) { + fscache_stat(&fscache_n_cop_grab_object); object->cache->ops->grab_object(object); + fscache_stat_d(&fscache_n_cop_grab_object); list_add(&object->dep_link, &parent->dependents); @@ -478,7 +484,9 @@ static void fscache_lookup_object(struct fscache_object *object) object->cache->tag->name); fscache_stat(&fscache_n_object_lookups); + fscache_stat(&fscache_n_cop_lookup_object); object->cache->ops->lookup_object(object); + fscache_stat_d(&fscache_n_cop_lookup_object); if (test_bit(FSCACHE_OBJECT_EV_ERROR, &object->events)) set_bit(FSCACHE_COOKIE_UNAVAILABLE, &cookie->flags); @@ -602,7 +610,9 @@ static void fscache_object_available(struct fscache_object *object) } spin_unlock(&object->lock); + fscache_stat(&fscache_n_cop_lookup_complete); object->cache->ops->lookup_complete(object); + fscache_stat_d(&fscache_n_cop_lookup_complete); fscache_enqueue_dependents(object); fscache_hist(fscache_obj_instantiate_histogram, object->lookup_jif); @@ -625,7 +635,9 @@ static void fscache_drop_object(struct fscache_object *object) list_del_init(&object->cache_link); spin_unlock(&cache->object_list_lock); + fscache_stat(&fscache_n_cop_drop_object); cache->ops->drop_object(object); + fscache_stat_d(&fscache_n_cop_drop_object); if (parent) { _debug("release parent OBJ%x {%d}", @@ -640,7 +652,9 @@ static void fscache_drop_object(struct fscache_object *object) } /* this just shifts the object release to the slow work processor */ + fscache_stat(&fscache_n_cop_put_object); object->cache->ops->put_object(object); + fscache_stat_d(&fscache_n_cop_put_object); _leave(""); } @@ -730,8 +744,12 @@ static int fscache_object_slow_work_get_ref(struct slow_work *work) { struct fscache_object *object = container_of(work, struct fscache_object, work); + int ret; - return object->cache->ops->grab_object(object) ? 0 : -EAGAIN; + fscache_stat(&fscache_n_cop_grab_object); + ret = object->cache->ops->grab_object(object) ? 0 : -EAGAIN; + fscache_stat_d(&fscache_n_cop_grab_object); + return ret; } /* @@ -742,7 +760,9 @@ static void fscache_object_slow_work_put_ref(struct slow_work *work) struct fscache_object *object = container_of(work, struct fscache_object, work); - return object->cache->ops->put_object(object); + fscache_stat(&fscache_n_cop_put_object); + object->cache->ops->put_object(object); + fscache_stat_d(&fscache_n_cop_put_object); } /* @@ -779,7 +799,9 @@ static void fscache_enqueue_dependents(struct fscache_object *object) /* sort onto appropriate lists */ fscache_enqueue_object(dep); + fscache_stat(&fscache_n_cop_put_object); dep->cache->ops->put_object(dep); + fscache_stat_d(&fscache_n_cop_put_object); if (!list_empty(&object->dependents)) cond_resched_lock(&object->lock); diff --git a/fs/fscache/page.c b/fs/fscache/page.c index c5973e38ce3..250dfd34c07 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -71,7 +71,9 @@ static void fscache_attr_changed_op(struct fscache_operation *op) if (fscache_object_is_active(object)) { fscache_set_op_state(op, "CallFS"); + fscache_stat(&fscache_n_cop_attr_changed); ret = object->cache->ops->attr_changed(object); + fscache_stat_d(&fscache_n_cop_attr_changed); fscache_set_op_state(op, "Done"); if (ret < 0) fscache_abort_object(object); @@ -300,11 +302,15 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, /* ask the cache to honour the operation */ if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) { + fscache_stat(&fscache_n_cop_allocate_page); ret = object->cache->ops->allocate_page(op, page, gfp); + fscache_stat_d(&fscache_n_cop_allocate_page); if (ret == 0) ret = -ENODATA; } else { + fscache_stat(&fscache_n_cop_read_or_alloc_page); ret = object->cache->ops->read_or_alloc_page(op, page, gfp); + fscache_stat_d(&fscache_n_cop_read_or_alloc_page); } if (ret == -ENOMEM) @@ -358,7 +364,6 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, void *context, gfp_t gfp) { - fscache_pages_retrieval_func_t func; struct fscache_retrieval *op; struct fscache_object *object; int ret; @@ -413,11 +418,17 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, } /* ask the cache to honour the operation */ - if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) - func = object->cache->ops->allocate_pages; - else - func = object->cache->ops->read_or_alloc_pages; - ret = func(op, pages, nr_pages, gfp); + if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) { + fscache_stat(&fscache_n_cop_allocate_pages); + ret = object->cache->ops->allocate_pages( + op, pages, nr_pages, gfp); + fscache_stat_d(&fscache_n_cop_allocate_pages); + } else { + fscache_stat(&fscache_n_cop_read_or_alloc_pages); + ret = object->cache->ops->read_or_alloc_pages( + op, pages, nr_pages, gfp); + fscache_stat_d(&fscache_n_cop_read_or_alloc_pages); + } if (ret == -ENOMEM) fscache_stat(&fscache_n_retrievals_nomem); @@ -500,7 +511,9 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, } /* ask the cache to honour the operation */ + fscache_stat(&fscache_n_cop_allocate_page); ret = object->cache->ops->allocate_page(op, page, gfp); + fscache_stat_d(&fscache_n_cop_allocate_page); if (ret < 0) fscache_stat(&fscache_n_allocs_nobufs); @@ -578,7 +591,9 @@ static void fscache_write_op(struct fscache_operation *_op) if (page) { fscache_set_op_state(&op->op, "Store"); + fscache_stat(&fscache_n_cop_write_page); ret = object->cache->ops->write_page(op, page); + fscache_stat_d(&fscache_n_cop_write_page); fscache_set_op_state(&op->op, "EndWrite"); fscache_end_page_write(cookie, page); page_cache_release(page); @@ -786,7 +801,9 @@ void __fscache_uncache_page(struct fscache_cookie *cookie, struct page *page) if (TestClearPageFsCache(page) && object->cache->ops->uncache_page) { /* the cache backend releases the cookie lock */ + fscache_stat(&fscache_n_cop_uncache_page); object->cache->ops->uncache_page(object, page); + fscache_stat_d(&fscache_n_cop_uncache_page); goto done; } diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 65deb99e756..20233fb44bf 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -93,6 +93,23 @@ atomic_t fscache_n_checkaux_okay; atomic_t fscache_n_checkaux_update; atomic_t fscache_n_checkaux_obsolete; +atomic_t fscache_n_cop_alloc_object; +atomic_t fscache_n_cop_lookup_object; +atomic_t fscache_n_cop_lookup_complete; +atomic_t fscache_n_cop_grab_object; +atomic_t fscache_n_cop_update_object; +atomic_t fscache_n_cop_drop_object; +atomic_t fscache_n_cop_put_object; +atomic_t fscache_n_cop_sync_cache; +atomic_t fscache_n_cop_attr_changed; +atomic_t fscache_n_cop_read_or_alloc_page; +atomic_t fscache_n_cop_read_or_alloc_pages; +atomic_t fscache_n_cop_allocate_page; +atomic_t fscache_n_cop_allocate_pages; +atomic_t fscache_n_cop_write_page; +atomic_t fscache_n_cop_uncache_page; +atomic_t fscache_n_cop_dissociate_pages; + /* * display the general statistics */ @@ -192,6 +209,26 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_op_deferred_release), atomic_read(&fscache_n_op_release), atomic_read(&fscache_n_op_gc)); + + seq_printf(m, "CacheOp: alo=%d luo=%d luc=%d gro=%d\n", + atomic_read(&fscache_n_cop_alloc_object), + atomic_read(&fscache_n_cop_lookup_object), + atomic_read(&fscache_n_cop_lookup_complete), + atomic_read(&fscache_n_cop_grab_object)); + seq_printf(m, "CacheOp: upo=%d dro=%d pto=%d atc=%d syn=%d\n", + atomic_read(&fscache_n_cop_update_object), + atomic_read(&fscache_n_cop_drop_object), + atomic_read(&fscache_n_cop_put_object), + atomic_read(&fscache_n_cop_attr_changed), + atomic_read(&fscache_n_cop_sync_cache)); + seq_printf(m, "CacheOp: rap=%d ras=%d alp=%d als=%d wrp=%d ucp=%d dsp=%d\n", + atomic_read(&fscache_n_cop_read_or_alloc_page), + atomic_read(&fscache_n_cop_read_or_alloc_pages), + atomic_read(&fscache_n_cop_allocate_page), + atomic_read(&fscache_n_cop_allocate_pages), + atomic_read(&fscache_n_cop_write_page), + atomic_read(&fscache_n_cop_uncache_page), + atomic_read(&fscache_n_cop_dissociate_pages)); return 0; } -- GitLab From 7e311a207d596b9273d811149d6e3e14f05ac4c0 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:11 +0000 Subject: [PATCH 0956/1165] FS-Cache: Clear netfs pointers in cookie after detaching object, not before Clear the pointers from the fscache_cookie struct to netfs private data after clearing the pointer to the cookie from the fscache_object struct and releasing the object lock, rather than before. This allows the netfs private data pointers to be relied on simply by holding the object lock, rather than having to hold the cookie lock. This is makes things simpler as the cookie lock has to be taken before the object lock, but sometimes the object pointer is all that the code has. Signed-off-by: David Howells --- fs/fscache/cookie.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index 432482edc73..b1870a6c2cd 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -437,12 +437,8 @@ void __fscache_relinquish_cookie(struct fscache_cookie *cookie, int retire) event = retire ? FSCACHE_OBJECT_EV_RETIRE : FSCACHE_OBJECT_EV_RELEASE; - /* detach pointers back to the netfs */ spin_lock(&cookie->lock); - cookie->netfs_data = NULL; - cookie->def = NULL; - /* break links with all the active objects */ while (!hlist_empty(&cookie->backing_objects)) { object = hlist_entry(cookie->backing_objects.first, @@ -465,6 +461,10 @@ void __fscache_relinquish_cookie(struct fscache_cookie *cookie, int retire) BUG(); } + /* detach pointers back to the netfs */ + cookie->netfs_data = NULL; + cookie->def = NULL; + spin_unlock(&cookie->lock); if (cookie->parent) { -- GitLab From b34df792b4e9e311db47fad27949095d0629c197 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:14 +0000 Subject: [PATCH 0957/1165] FS-Cache: Use radix tree preload correctly in tracking of pages to be stored __fscache_write_page() attempts to load the radix tree preallocation pool for the CPU it is on before calling radix_tree_insert(), as the insertion must be done inside a pair of spinlocks. Use of the preallocation pool, however, is contingent on the radix tree being initialised without __GFP_WAIT specified. __fscache_acquire_cookie() was passing GFP_NOFS to INIT_RADIX_TREE() - but that includes __GFP_WAIT. The solution is to AND out __GFP_WAIT. Additionally, the banner comment to radix_tree_preload() is altered to make note of this prerequisite. Possibly there should be a WARN_ON() too. Without this fix, I have seen the following recursive deadlock caused by radix_tree_insert() attempting to allocate memory inside the spinlocked region, which resulted in FS-Cache being called back into to release memory - which required the spinlock already held. ============================================= [ INFO: possible recursive locking detected ] 2.6.32-rc6-cachefs #24 --------------------------------------------- nfsiod/7916 is trying to acquire lock: (&cookie->lock){+.+.-.}, at: [] __fscache_uncache_page+0xdb/0x160 [fscache] but task is already holding lock: (&cookie->lock){+.+.-.}, at: [] __fscache_write_page+0x15c/0x3f3 [fscache] other info that might help us debug this: 5 locks held by nfsiod/7916: #0: (nfsiod){+.+.+.}, at: [] worker_thread+0x19a/0x2e2 #1: (&task->u.tk_work#2){+.+.+.}, at: [] worker_thread+0x19a/0x2e2 #2: (&cookie->lock){+.+.-.}, at: [] __fscache_write_page+0x15c/0x3f3 [fscache] #3: (&object->lock#2){+.+.-.}, at: [] __fscache_write_page+0x197/0x3f3 [fscache] #4: (&cookie->stores_lock){+.+...}, at: [] __fscache_write_page+0x19f/0x3f3 [fscache] stack backtrace: Pid: 7916, comm: nfsiod Not tainted 2.6.32-rc6-cachefs #24 Call Trace: [] __lock_acquire+0x1649/0x16e3 [] ? __lock_acquire+0x7b7/0x16e3 [] ? dump_trace+0x248/0x257 [] lock_acquire+0x57/0x6d [] ? __fscache_uncache_page+0xdb/0x160 [fscache] [] _spin_lock+0x2c/0x3b [] ? __fscache_uncache_page+0xdb/0x160 [fscache] [] __fscache_uncache_page+0xdb/0x160 [fscache] [] ? __fscache_check_page_write+0x0/0x71 [fscache] [] nfs_fscache_release_page+0x86/0xc4 [nfs] [] nfs_release_page+0x3c/0x41 [nfs] [] try_to_release_page+0x32/0x3b [] shrink_page_list+0x316/0x4ac [] ? mark_held_locks+0x52/0x70 [] ? _spin_unlock_irq+0x2b/0x31 [] shrink_inactive_list+0x392/0x67c [] ? mark_held_locks+0x52/0x70 [] shrink_list+0x8d/0x8f [] shrink_zone+0x278/0x33c [] ? ktime_get_ts+0xad/0xba [] try_to_free_pages+0x22e/0x392 [] ? isolate_pages_global+0x0/0x212 [] __alloc_pages_nodemask+0x3dc/0x5cf [] cache_alloc_refill+0x34d/0x6c1 [] ? radix_tree_node_alloc+0x52/0x5c [] kmem_cache_alloc+0xb2/0x118 [] radix_tree_node_alloc+0x52/0x5c [] radix_tree_insert+0x57/0x19c [] __fscache_write_page+0x1e3/0x3f3 [fscache] [] __nfs_readpage_to_fscache+0x58/0x11e [nfs] [] nfs_readpage_release+0x34/0x9b [nfs] [] nfs_readpage_release_full+0x32/0x4b [nfs] [] rpc_release_calldata+0x12/0x14 [sunrpc] [] rpc_free_task+0x59/0x61 [sunrpc] [] rpc_async_release+0x10/0x12 [sunrpc] [] worker_thread+0x1ef/0x2e2 [] ? worker_thread+0x19a/0x2e2 [] ? thread_return+0x3e/0x101 [] ? rpc_async_release+0x0/0x12 [sunrpc] [] ? autoremove_wake_function+0x0/0x34 [] ? trace_hardirqs_on+0xd/0xf [] ? worker_thread+0x0/0x2e2 [] kthread+0x7a/0x82 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? add_wait_queue+0x15/0x44 [] ? kthread+0x0/0x82 [] ? child_rip+0x0/0x20 Signed-off-by: David Howells --- fs/fscache/cookie.c | 4 +++- lib/radix-tree.c | 3 +++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index b1870a6c2cd..e6854f5222f 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -102,7 +102,9 @@ struct fscache_cookie *__fscache_acquire_cookie( cookie->netfs_data = netfs_data; cookie->flags = 0; - INIT_RADIX_TREE(&cookie->stores, GFP_NOFS); + /* radix tree insertion won't use the preallocation pool unless it's + * told it may not wait */ + INIT_RADIX_TREE(&cookie->stores, GFP_NOFS & ~__GFP_WAIT); switch (cookie->def->type) { case FSCACHE_COOKIE_TYPE_INDEX: diff --git a/lib/radix-tree.c b/lib/radix-tree.c index 23abbd93cae..ae610685556 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -200,6 +200,9 @@ radix_tree_node_free(struct radix_tree_node *node) * ensure that the addition of a single element in the tree cannot fail. On * success, return zero, with preemption disabled. On error, return -ENOMEM * with preemption not disabled. + * + * To make use of this facility, the radix tree must be initialised without + * __GFP_WAIT being passed to INIT_RADIX_TREE(). */ int radix_tree_preload(gfp_t gfp_mask) { -- GitLab From 5753c441889253e4323eee85f791a1d64cf08196 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:19 +0000 Subject: [PATCH 0958/1165] FS-Cache: Permit cache retrieval ops to be interrupted in the initial wait phase Permit the operations to retrieve data from the cache or to allocate space in the cache for future writes to be interrupted whilst they're waiting for permission for the operation to proceed. Typically this wait occurs whilst the cache object is being looked up on disk in the background. If an interruption occurs, and the operation has not yet been given the go-ahead to run, the operation is dequeued and cancelled, and control returns to the read operation of the netfs routine with none of the requested pages having been read or in any way marked as known by the cache. This means that the initial wait is done interruptibly rather than uninterruptibly. In addition, extra stats values are made available to show the number of ops cancelled and the number of cache space allocations interrupted. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 2 + fs/fscache/internal.h | 3 + fs/fscache/operation.c | 82 ++++++++++++------- fs/fscache/page.c | 55 +++++++++++-- fs/fscache/stats.c | 12 ++- 5 files changed, 115 insertions(+), 39 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index b6c32c080ab..0a77868f497 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -250,6 +250,7 @@ proc files. ok=N Number of successful alloc reqs wt=N Number of alloc reqs that waited on lookup completion nbf=N Number of alloc reqs rejected -ENOBUFS + int=N Number of alloc reqs aborted -ERESTARTSYS ops=N Number of alloc reqs submitted owt=N Number of alloc reqs waited for CPU time Retrvls n=N Number of retrieval (read) requests seen @@ -271,6 +272,7 @@ proc files. Ops pend=N Number of times async ops added to pending queues run=N Number of times async ops given CPU time enq=N Number of times async ops queued for processing + can=N Number of async ops cancelled dfr=N Number of async ops queued for deferred release rel=N Number of async ops released gc=N Number of deferred-release async ops garbage collected diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index b85cc890681..50324ad2b19 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -112,6 +112,7 @@ extern int fscache_submit_exclusive_op(struct fscache_object *, struct fscache_operation *); extern int fscache_submit_op(struct fscache_object *, struct fscache_operation *); +extern int fscache_cancel_op(struct fscache_operation *); extern void fscache_abort_object(struct fscache_object *); extern void fscache_start_operations(struct fscache_object *); extern void fscache_operation_gc(struct work_struct *); @@ -140,6 +141,7 @@ extern atomic_t fscache_n_op_enqueue; extern atomic_t fscache_n_op_deferred_release; extern atomic_t fscache_n_op_release; extern atomic_t fscache_n_op_gc; +extern atomic_t fscache_n_op_cancelled; extern atomic_t fscache_n_attr_changed; extern atomic_t fscache_n_attr_changed_ok; @@ -151,6 +153,7 @@ extern atomic_t fscache_n_allocs; extern atomic_t fscache_n_allocs_ok; extern atomic_t fscache_n_allocs_wait; extern atomic_t fscache_n_allocs_nobufs; +extern atomic_t fscache_n_allocs_intr; extern atomic_t fscache_n_alloc_ops; extern atomic_t fscache_n_alloc_op_waits; diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index 09e43b6e822..296492efb81 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -34,32 +34,31 @@ void fscache_enqueue_operation(struct fscache_operation *op) fscache_set_op_state(op, "EnQ"); + ASSERT(list_empty(&op->pend_link)); ASSERT(op->processor != NULL); ASSERTCMP(op->object->state, >=, FSCACHE_OBJECT_AVAILABLE); ASSERTCMP(atomic_read(&op->usage), >, 0); - if (list_empty(&op->pend_link)) { - switch (op->flags & FSCACHE_OP_TYPE) { - case FSCACHE_OP_FAST: - _debug("queue fast"); - atomic_inc(&op->usage); - if (!schedule_work(&op->fast_work)) - fscache_put_operation(op); - break; - case FSCACHE_OP_SLOW: - _debug("queue slow"); - slow_work_enqueue(&op->slow_work); - break; - case FSCACHE_OP_MYTHREAD: - _debug("queue for caller's attention"); - break; - default: - printk(KERN_ERR "FS-Cache: Unexpected op type %lx", - op->flags); - BUG(); - break; - } - fscache_stat(&fscache_n_op_enqueue); + fscache_stat(&fscache_n_op_enqueue); + switch (op->flags & FSCACHE_OP_TYPE) { + case FSCACHE_OP_FAST: + _debug("queue fast"); + atomic_inc(&op->usage); + if (!schedule_work(&op->fast_work)) + fscache_put_operation(op); + break; + case FSCACHE_OP_SLOW: + _debug("queue slow"); + slow_work_enqueue(&op->slow_work); + break; + case FSCACHE_OP_MYTHREAD: + _debug("queue for caller's attention"); + break; + default: + printk(KERN_ERR "FS-Cache: Unexpected op type %lx", + op->flags); + BUG(); + break; } } EXPORT_SYMBOL(fscache_enqueue_operation); @@ -97,6 +96,7 @@ int fscache_submit_exclusive_op(struct fscache_object *object, spin_lock(&object->lock); ASSERTCMP(object->n_ops, >=, object->n_in_progress); ASSERTCMP(object->n_ops, >=, object->n_exclusive); + ASSERT(list_empty(&op->pend_link)); ret = -ENOBUFS; if (fscache_object_is_active(object)) { @@ -202,6 +202,7 @@ int fscache_submit_op(struct fscache_object *object, spin_lock(&object->lock); ASSERTCMP(object->n_ops, >=, object->n_in_progress); ASSERTCMP(object->n_ops, >=, object->n_exclusive); + ASSERT(list_empty(&op->pend_link)); ostate = object->state; smp_rmb(); @@ -273,12 +274,7 @@ void fscache_start_operations(struct fscache_object *object) stop = true; } list_del_init(&op->pend_link); - object->n_in_progress++; - - if (test_and_clear_bit(FSCACHE_OP_WAITING, &op->flags)) - wake_up_bit(&op->flags, FSCACHE_OP_WAITING); - if (op->processor) - fscache_enqueue_operation(op); + fscache_run_op(object, op); /* the pending queue was holding a ref on the object */ fscache_put_operation(op); @@ -290,6 +286,36 @@ void fscache_start_operations(struct fscache_object *object) object->n_in_progress, object->debug_id); } +/* + * cancel an operation that's pending on an object + */ +int fscache_cancel_op(struct fscache_operation *op) +{ + struct fscache_object *object = op->object; + int ret; + + _enter("OBJ%x OP%x}", op->object->debug_id, op->debug_id); + + spin_lock(&object->lock); + + ret = -EBUSY; + if (!list_empty(&op->pend_link)) { + fscache_stat(&fscache_n_op_cancelled); + list_del_init(&op->pend_link); + object->n_ops--; + if (test_bit(FSCACHE_OP_EXCLUSIVE, &op->flags)) + object->n_exclusive--; + if (test_and_clear_bit(FSCACHE_OP_WAITING, &op->flags)) + wake_up_bit(&op->flags, FSCACHE_OP_WAITING); + fscache_put_operation(op); + ret = 0; + } + + spin_unlock(&object->lock); + _leave(" = %d", ret); + return ret; +} + /* * release an operation * - queues pending ops if this is the last in-progress op diff --git a/fs/fscache/page.c b/fs/fscache/page.c index 250dfd34c07..e6f2e61133a 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -295,8 +295,20 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { _debug(">>> WT"); fscache_stat(&fscache_n_retrieval_op_waits); - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); + if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit_interruptible, + TASK_INTERRUPTIBLE) < 0) { + ret = fscache_cancel_op(&op->op); + if (ret == 0) { + ret = -ERESTARTSYS; + goto error; + } + + /* it's been removed from the pending queue by another + * party, so we should get to run shortly */ + wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit, TASK_UNINTERRUPTIBLE); + } _debug("<<< GO"); } @@ -313,6 +325,7 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, fscache_stat_d(&fscache_n_cop_read_or_alloc_page); } +error: if (ret == -ENOMEM) fscache_stat(&fscache_n_retrievals_nomem); else if (ret == -ERESTARTSYS) @@ -412,8 +425,20 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { _debug(">>> WT"); fscache_stat(&fscache_n_retrieval_op_waits); - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); + if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit_interruptible, + TASK_INTERRUPTIBLE) < 0) { + ret = fscache_cancel_op(&op->op); + if (ret == 0) { + ret = -ERESTARTSYS; + goto error; + } + + /* it's been removed from the pending queue by another + * party, so we should get to run shortly */ + wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit, TASK_UNINTERRUPTIBLE); + } _debug("<<< GO"); } @@ -430,6 +455,7 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, fscache_stat_d(&fscache_n_cop_read_or_alloc_pages); } +error: if (ret == -ENOMEM) fscache_stat(&fscache_n_retrievals_nomem); else if (ret == -ERESTARTSYS) @@ -505,8 +531,20 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { _debug(">>> WT"); fscache_stat(&fscache_n_alloc_op_waits); - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); + if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit_interruptible, + TASK_INTERRUPTIBLE) < 0) { + ret = fscache_cancel_op(&op->op); + if (ret == 0) { + ret = -ERESTARTSYS; + goto error; + } + + /* it's been removed from the pending queue by another + * party, so we should get to run shortly */ + wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit, TASK_UNINTERRUPTIBLE); + } _debug("<<< GO"); } @@ -515,7 +553,10 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, ret = object->cache->ops->allocate_page(op, page, gfp); fscache_stat_d(&fscache_n_cop_allocate_page); - if (ret < 0) +error: + if (ret == -ERESTARTSYS) + fscache_stat(&fscache_n_allocs_intr); + else if (ret < 0) fscache_stat(&fscache_n_allocs_nobufs); else fscache_stat(&fscache_n_allocs_ok); diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 20233fb44bf..4c07439d130 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -25,6 +25,7 @@ atomic_t fscache_n_op_requeue; atomic_t fscache_n_op_deferred_release; atomic_t fscache_n_op_release; atomic_t fscache_n_op_gc; +atomic_t fscache_n_op_cancelled; atomic_t fscache_n_attr_changed; atomic_t fscache_n_attr_changed_ok; @@ -36,6 +37,7 @@ atomic_t fscache_n_allocs; atomic_t fscache_n_allocs_ok; atomic_t fscache_n_allocs_wait; atomic_t fscache_n_allocs_nobufs; +atomic_t fscache_n_allocs_intr; atomic_t fscache_n_alloc_ops; atomic_t fscache_n_alloc_op_waits; @@ -169,11 +171,12 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_attr_changed_nomem), atomic_read(&fscache_n_attr_changed_calls)); - seq_printf(m, "Allocs : n=%u ok=%u wt=%u nbf=%u\n", + seq_printf(m, "Allocs : n=%u ok=%u wt=%u nbf=%u int=%u\n", atomic_read(&fscache_n_allocs), atomic_read(&fscache_n_allocs_ok), atomic_read(&fscache_n_allocs_wait), - atomic_read(&fscache_n_allocs_nobufs)); + atomic_read(&fscache_n_allocs_nobufs), + atomic_read(&fscache_n_allocs_intr)); seq_printf(m, "Allocs : ops=%u owt=%u\n", atomic_read(&fscache_n_alloc_ops), atomic_read(&fscache_n_alloc_op_waits)); @@ -201,10 +204,11 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_store_ops), atomic_read(&fscache_n_store_calls)); - seq_printf(m, "Ops : pend=%u run=%u enq=%u\n", + seq_printf(m, "Ops : pend=%u run=%u enq=%u can=%u\n", atomic_read(&fscache_n_op_pend), atomic_read(&fscache_n_op_run), - atomic_read(&fscache_n_op_enqueue)); + atomic_read(&fscache_n_op_enqueue), + atomic_read(&fscache_n_op_cancelled)); seq_printf(m, "Ops : dfr=%u rel=%u gc=%u\n", atomic_read(&fscache_n_op_deferred_release), atomic_read(&fscache_n_op_release), -- GitLab From 6897e3df8fc37bd4a58bbcdef8306da7fc175584 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:22 +0000 Subject: [PATCH 0959/1165] FS-Cache: The object-available state can't rely on the cookie to be available The object-available state in the object processing state machine (as processed by fscache_object_available()) can't rely on the cookie to be available because the FSCACHE_COOKIE_CREATING bit may have been cleared by fscache_obtained_object() prior to the object being put into the FSCACHE_OBJECT_AVAILABLE state. Clearing the FSCACHE_COOKIE_CREATING bit on a cookie permits __fscache_relinquish_cookie() to proceed and detach the cookie from the object. To deal with this, we don't dereference object->cookie in fscache_object_available() if the object has already been detached. In addition, a couple of assertions are added into fscache_drop_object() to make sure the object is unbound from the cookie before it gets there. Signed-off-by: David Howells --- fs/fscache/object.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 0d65c0c92b4..1a1afa82f79 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -158,7 +158,8 @@ static void fscache_object_state_machine(struct fscache_object *object) spin_lock(&object->lock); object->state = FSCACHE_OBJECT_DYING; - if (test_and_clear_bit(FSCACHE_COOKIE_CREATING, + if (object->cookie && + test_and_clear_bit(FSCACHE_COOKIE_CREATING, &object->cookie->flags)) wake_up_bit(&object->cookie->flags, FSCACHE_COOKIE_CREATING); @@ -594,7 +595,8 @@ static void fscache_object_available(struct fscache_object *object) spin_lock(&object->lock); - if (test_and_clear_bit(FSCACHE_COOKIE_CREATING, &object->cookie->flags)) + if (object->cookie && + test_and_clear_bit(FSCACHE_COOKIE_CREATING, &object->cookie->flags)) wake_up_bit(&object->cookie->flags, FSCACHE_COOKIE_CREATING); fscache_done_parent_op(object); @@ -631,6 +633,9 @@ static void fscache_drop_object(struct fscache_object *object) _enter("{OBJ%x,%d}", object->debug_id, object->n_children); + ASSERTCMP(object->cookie, ==, NULL); + ASSERT(hlist_unhashed(&object->cookie_link)); + spin_lock(&cache->object_list_lock); list_del_init(&object->cache_link); spin_unlock(&cache->object_list_lock); -- GitLab From 1bccf513ac49d44604ba1cddcc29f5886e70f1b6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:25 +0000 Subject: [PATCH 0960/1165] FS-Cache: Fix lock misorder in fscache_write_op() FS-Cache has two structs internally for keeping track of the internal state of a cached file: the fscache_cookie struct, which represents the netfs's state, and fscache_object struct, which represents the cache's state. Each has a pointer that points to the other (when both are in existence), and each has a spinlock for pointer maintenance. Since netfs operations approach these structures from the cookie side, they get the cookie lock first, then the object lock. Cache operations, on the other hand, approach from the object side, and get the object lock first. It is not then permitted for a cache operation to get the cookie lock whilst it is holding the object lock lest deadlock occur; instead, it must do one of two things: (1) increment the cookie usage counter, drop the object lock and then get both locks in order, or (2) simply hold the object lock as certain parts of the cookie may not be altered whilst the object lock is held. It is also not permitted to follow either pointer without holding the lock at the end you start with. To break the pointers between the cookie and the object, both locks must be held. fscache_write_op(), however, violates the locking rules: It attempts to get the cookie lock without (a) checking that the cookie pointer is a valid pointer, and (b) holding the object lock to protect the cookie pointer whilst it follows it. This is so that it can access the pending page store tree without interference from __fscache_write_page(). This is fixed by splitting the cookie lock, such that the page store tracking tree is protected by its own lock, and checking that the cookie pointer is non-NULL before we attempt to follow it whilst holding the object lock. The new lock is subordinate to both the cookie lock and the object lock, and so should be taken after those. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 3 ++ fs/fscache/cookie.c | 1 + fs/fscache/internal.h | 4 ++ fs/fscache/page.c | 52 +++++++++++++------ fs/fscache/stats.c | 10 +++- include/linux/fscache-cache.h | 1 + 6 files changed, 52 insertions(+), 19 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 0a77868f497..9cf2cfbc81c 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -269,6 +269,9 @@ proc files. oom=N Number of store reqs failed -ENOMEM ops=N Number of store reqs submitted run=N Number of store reqs granted CPU time + pgs=N Number of pages given store req processing time + rxd=N Number of store reqs deleted from tracking tree + olm=N Number of store reqs over store limit Ops pend=N Number of times async ops added to pending queues run=N Number of times async ops given CPU time enq=N Number of times async ops queued for processing diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index e6854f5222f..f979659c1b3 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -36,6 +36,7 @@ void fscache_cookie_init_once(void *_cookie) memset(cookie, 0, sizeof(*cookie)); spin_lock_init(&cookie->lock); + spin_lock_init(&cookie->stores_lock); INIT_HLIST_HEAD(&cookie->backing_objects); } diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index 50324ad2b19..ba1853fa1ff 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -17,6 +17,7 @@ * - cache->object_list_lock * - object->lock * - object->parent->lock + * - cookie->stores_lock * - fscache_thread_lock * */ @@ -174,6 +175,9 @@ extern atomic_t fscache_n_stores_nobufs; extern atomic_t fscache_n_stores_oom; extern atomic_t fscache_n_store_ops; extern atomic_t fscache_n_store_calls; +extern atomic_t fscache_n_store_pages; +extern atomic_t fscache_n_store_radix_deletes; +extern atomic_t fscache_n_store_pages_over_limit; extern atomic_t fscache_n_marks; extern atomic_t fscache_n_uncaches; diff --git a/fs/fscache/page.c b/fs/fscache/page.c index e6f2e61133a..3ea8897bc21 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -45,16 +45,26 @@ EXPORT_SYMBOL(__fscache_wait_on_page_write); /* * note that a page has finished being written to the cache */ -static void fscache_end_page_write(struct fscache_cookie *cookie, struct page *page) +static void fscache_end_page_write(struct fscache_object *object, + struct page *page) { - struct page *xpage; + struct fscache_cookie *cookie; + struct page *xpage = NULL; - spin_lock(&cookie->lock); - xpage = radix_tree_delete(&cookie->stores, page->index); - spin_unlock(&cookie->lock); - ASSERT(xpage != NULL); - - wake_up_bit(&cookie->flags, 0); + spin_lock(&object->lock); + cookie = object->cookie; + if (cookie) { + /* delete the page from the tree if it is now no longer + * pending */ + spin_lock(&cookie->stores_lock); + fscache_stat(&fscache_n_store_radix_deletes); + xpage = radix_tree_delete(&cookie->stores, page->index); + spin_unlock(&cookie->stores_lock); + wake_up_bit(&cookie->flags, 0); + } + spin_unlock(&object->lock); + if (xpage) + page_cache_release(xpage); } /* @@ -591,7 +601,7 @@ static void fscache_write_op(struct fscache_operation *_op) struct fscache_storage *op = container_of(_op, struct fscache_storage, op); struct fscache_object *object = op->op.object; - struct fscache_cookie *cookie = object->cookie; + struct fscache_cookie *cookie; struct page *page; unsigned n; void *results[1]; @@ -601,16 +611,17 @@ static void fscache_write_op(struct fscache_operation *_op) fscache_set_op_state(&op->op, "GetPage"); - spin_lock(&cookie->lock); spin_lock(&object->lock); + cookie = object->cookie; - if (!fscache_object_is_active(object)) { + if (!fscache_object_is_active(object) || !cookie) { spin_unlock(&object->lock); - spin_unlock(&cookie->lock); _leave(""); return; } + spin_lock(&cookie->stores_lock); + fscache_stat(&fscache_n_store_calls); /* find a page to store */ @@ -621,23 +632,25 @@ static void fscache_write_op(struct fscache_operation *_op) goto superseded; page = results[0]; _debug("gang %d [%lx]", n, page->index); - if (page->index > op->store_limit) + if (page->index > op->store_limit) { + fscache_stat(&fscache_n_store_pages_over_limit); goto superseded; + } radix_tree_tag_clear(&cookie->stores, page->index, FSCACHE_COOKIE_PENDING_TAG); + spin_unlock(&cookie->stores_lock); spin_unlock(&object->lock); - spin_unlock(&cookie->lock); if (page) { fscache_set_op_state(&op->op, "Store"); + fscache_stat(&fscache_n_store_pages); fscache_stat(&fscache_n_cop_write_page); ret = object->cache->ops->write_page(op, page); fscache_stat_d(&fscache_n_cop_write_page); fscache_set_op_state(&op->op, "EndWrite"); - fscache_end_page_write(cookie, page); - page_cache_release(page); + fscache_end_page_write(object, page); if (ret < 0) { fscache_set_op_state(&op->op, "Abort"); fscache_abort_object(object); @@ -653,9 +666,9 @@ superseded: /* this writer is going away and there aren't any more things to * write */ _debug("cease"); + spin_unlock(&cookie->stores_lock); clear_bit(FSCACHE_OBJECT_PENDING_WRITE, &object->flags); spin_unlock(&object->lock); - spin_unlock(&cookie->lock); _leave(""); } @@ -731,6 +744,7 @@ int __fscache_write_page(struct fscache_cookie *cookie, /* add the page to the pending-storage radix tree on the backing * object */ spin_lock(&object->lock); + spin_lock(&cookie->stores_lock); _debug("store limit %llx", (unsigned long long) object->store_limit); @@ -751,6 +765,7 @@ int __fscache_write_page(struct fscache_cookie *cookie, if (test_and_set_bit(FSCACHE_OBJECT_PENDING_WRITE, &object->flags)) goto already_pending; + spin_unlock(&cookie->stores_lock); spin_unlock(&object->lock); op->op.debug_id = atomic_inc_return(&fscache_op_debug_id); @@ -772,6 +787,7 @@ int __fscache_write_page(struct fscache_cookie *cookie, already_queued: fscache_stat(&fscache_n_stores_again); already_pending: + spin_unlock(&cookie->stores_lock); spin_unlock(&object->lock); spin_unlock(&cookie->lock); radix_tree_preload_end(); @@ -781,7 +797,9 @@ already_pending: return 0; submit_failed: + spin_lock(&cookie->stores_lock); radix_tree_delete(&cookie->stores, page->index); + spin_unlock(&cookie->stores_lock); page_cache_release(page); ret = -ENOBUFS; goto nobufs; diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 4c07439d130..1d53ea68409 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -58,6 +58,9 @@ atomic_t fscache_n_stores_nobufs; atomic_t fscache_n_stores_oom; atomic_t fscache_n_store_ops; atomic_t fscache_n_store_calls; +atomic_t fscache_n_store_pages; +atomic_t fscache_n_store_radix_deletes; +atomic_t fscache_n_store_pages_over_limit; atomic_t fscache_n_marks; atomic_t fscache_n_uncaches; @@ -200,9 +203,12 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_stores_again), atomic_read(&fscache_n_stores_nobufs), atomic_read(&fscache_n_stores_oom)); - seq_printf(m, "Stores : ops=%u run=%u\n", + seq_printf(m, "Stores : ops=%u run=%u pgs=%u rxd=%u olm=%u\n", atomic_read(&fscache_n_store_ops), - atomic_read(&fscache_n_store_calls)); + atomic_read(&fscache_n_store_calls), + atomic_read(&fscache_n_store_pages), + atomic_read(&fscache_n_store_radix_deletes), + atomic_read(&fscache_n_store_pages_over_limit)); seq_printf(m, "Ops : pend=%u run=%u enq=%u can=%u\n", atomic_read(&fscache_n_op_pend), diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 184cbdfbcc9..f3aa4bdafef 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -310,6 +310,7 @@ struct fscache_cookie { atomic_t usage; /* number of users of this cookie */ atomic_t n_children; /* number of children of this cookie */ spinlock_t lock; + spinlock_t stores_lock; /* lock on page store tree */ struct hlist_head backing_objects; /* object(s) backing this file/index */ const struct fscache_cookie_def *def; /* definition */ struct fscache_cookie *parent; /* parent of this entry */ -- GitLab From 285e728b0ac55b53a673114096168d6f74930167 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:29 +0000 Subject: [PATCH 0961/1165] FS-Cache: Don't delete pending pages from the page-store tracking tree Don't delete pending pages from the page-store tracking tree, but rather send them for another write as they've presumably been updated. Signed-off-by: David Howells --- fs/fscache/page.c | 7 +++++-- lib/radix-tree.c | 2 -- 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/fscache/page.c b/fs/fscache/page.c index 3ea8897bc21..022a5da8e13 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -57,8 +57,11 @@ static void fscache_end_page_write(struct fscache_object *object, /* delete the page from the tree if it is now no longer * pending */ spin_lock(&cookie->stores_lock); - fscache_stat(&fscache_n_store_radix_deletes); - xpage = radix_tree_delete(&cookie->stores, page->index); + if (!radix_tree_tag_get(&cookie->stores, page->index, + FSCACHE_COOKIE_PENDING_TAG)) { + fscache_stat(&fscache_n_store_radix_deletes); + xpage = radix_tree_delete(&cookie->stores, page->index); + } spin_unlock(&cookie->stores_lock); wake_up_bit(&cookie->flags, 0); } diff --git a/lib/radix-tree.c b/lib/radix-tree.c index ae610685556..92cdd9936e3 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -546,7 +546,6 @@ out: } EXPORT_SYMBOL(radix_tree_tag_clear); -#ifndef __KERNEL__ /* Only the test harness uses this at present */ /** * radix_tree_tag_get - get a tag on a radix tree node * @root: radix tree root @@ -609,7 +608,6 @@ int radix_tree_tag_get(struct radix_tree_root *root, } } EXPORT_SYMBOL(radix_tree_tag_get); -#endif /** * radix_tree_next_hole - find the next hole (not-present entry) -- GitLab From e3d4d28b1c8cc7c26536a50b43d86ccd39878550 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:32 +0000 Subject: [PATCH 0962/1165] FS-Cache: Handle read request vs lookup, creation or other cache failure FS-Cache doesn't correctly handle the netfs requesting a read from the cache on an object that failed or was withdrawn by the cache. A trace similar to the following might be seen: CacheFiles: Lookup failed error -105 [exe ] unexpected submission OP165afe [OBJ6cac OBJECT_LC_DYING] [exe ] objstate=OBJECT_LC_DYING [OBJECT_LC_DYING] [exe ] objflags=0 [exe ] objevent=9 [fffffffffffffffb] [exe ] ops=0 inp=0 exc=0 Pid: 6970, comm: exe Not tainted 2.6.32-rc6-cachefs #50 Call Trace: [] fscache_submit_op+0x3ff/0x45a [fscache] [] __fscache_read_or_alloc_pages+0x187/0x3c4 [fscache] [] ? nfs_readpage_from_fscache_complete+0x0/0x66 [nfs] [] __nfs_readpages_from_fscache+0x7e/0x176 [nfs] [] ? __alloc_pages_nodemask+0x11c/0x5cf [] nfs_readpages+0x114/0x1d7 [nfs] [] __do_page_cache_readahead+0x15f/0x1ec [] ? __do_page_cache_readahead+0x73/0x1ec [] ra_submit+0x1c/0x20 [] ondemand_readahead+0x227/0x23a [] page_cache_sync_readahead+0x17/0x19 [] generic_file_aio_read+0x236/0x5a0 [] nfs_file_read+0xe4/0xf3 [nfs] [] do_sync_read+0xe3/0x120 [] ? _spin_unlock_irq+0x2b/0x31 [] ? autoremove_wake_function+0x0/0x34 [] ? selinux_file_permission+0x5d/0x10f [] ? thread_return+0x3e/0x101 [] ? security_file_permission+0x11/0x13 [] vfs_read+0xaa/0x16f [] ? trace_hardirqs_on_caller+0x10c/0x130 [] sys_read+0x45/0x6c [] system_call_fastpath+0x16/0x1b The object state might also be OBJECT_DYING or OBJECT_WITHDRAWING. This should be handled by simply rejecting the new operation with ENOBUFS. There's no need to log an error for it. Events of this type now appear in the stats file under Ops:rej. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 1 + fs/fscache/internal.h | 1 + fs/fscache/operation.c | 5 +++++ fs/fscache/stats.c | 6 ++++-- 4 files changed, 11 insertions(+), 2 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 9cf2cfbc81c..057a3c71d52 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -276,6 +276,7 @@ proc files. run=N Number of times async ops given CPU time enq=N Number of times async ops queued for processing can=N Number of async ops cancelled + rej=N Number of async ops rejected due to object lookup/create failure dfr=N Number of async ops queued for deferred release rel=N Number of async ops released gc=N Number of deferred-release async ops garbage collected diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index ba1853fa1ff..a0769872b19 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -143,6 +143,7 @@ extern atomic_t fscache_n_op_deferred_release; extern atomic_t fscache_n_op_release; extern atomic_t fscache_n_op_gc; extern atomic_t fscache_n_op_cancelled; +extern atomic_t fscache_n_op_rejected; extern atomic_t fscache_n_attr_changed; extern atomic_t fscache_n_attr_changed_ok; diff --git a/fs/fscache/operation.c b/fs/fscache/operation.c index 296492efb81..313e79a1426 100644 --- a/fs/fscache/operation.c +++ b/fs/fscache/operation.c @@ -232,6 +232,11 @@ int fscache_submit_op(struct fscache_object *object, list_add_tail(&op->pend_link, &object->pending_ops); fscache_stat(&fscache_n_op_pend); ret = 0; + } else if (object->state == FSCACHE_OBJECT_DYING || + object->state == FSCACHE_OBJECT_LC_DYING || + object->state == FSCACHE_OBJECT_WITHDRAWING) { + fscache_stat(&fscache_n_op_rejected); + ret = -ENOBUFS; } else if (!test_bit(FSCACHE_IOERROR, &object->cache->flags)) { fscache_report_unexpected_submission(object, op, ostate); ASSERT(!fscache_object_is_active(object)); diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 1d53ea68409..045ba396dbf 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -26,6 +26,7 @@ atomic_t fscache_n_op_deferred_release; atomic_t fscache_n_op_release; atomic_t fscache_n_op_gc; atomic_t fscache_n_op_cancelled; +atomic_t fscache_n_op_rejected; atomic_t fscache_n_attr_changed; atomic_t fscache_n_attr_changed_ok; @@ -210,11 +211,12 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_store_radix_deletes), atomic_read(&fscache_n_store_pages_over_limit)); - seq_printf(m, "Ops : pend=%u run=%u enq=%u can=%u\n", + seq_printf(m, "Ops : pend=%u run=%u enq=%u can=%u rej=%u\n", atomic_read(&fscache_n_op_pend), atomic_read(&fscache_n_op_run), atomic_read(&fscache_n_op_enqueue), - atomic_read(&fscache_n_op_cancelled)); + atomic_read(&fscache_n_op_cancelled), + atomic_read(&fscache_n_op_rejected)); seq_printf(m, "Ops : dfr=%u rel=%u gc=%u\n", atomic_read(&fscache_n_op_deferred_release), atomic_read(&fscache_n_op_release), -- GitLab From 201a15428bd54f83eccec8b7c64a04b8f9431204 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:35 +0000 Subject: [PATCH 0963/1165] FS-Cache: Handle pages pending storage that get evicted under OOM conditions Handle netfs pages that the vmscan algorithm wants to evict from the pagecache under OOM conditions, but that are waiting for write to the cache. Under these conditions, vmscan calls the releasepage() function of the netfs, asking if a page can be discarded. The problem is typified by the following trace of a stuck process: kslowd005 D 0000000000000000 0 4253 2 0x00000080 ffff88001b14f370 0000000000000046 ffff880020d0d000 0000000000000007 0000000000000006 0000000000000001 ffff88001b14ffd8 ffff880020d0d2a8 000000000000ddf0 00000000000118c0 00000000000118c0 ffff880020d0d2a8 Call Trace: [] __fscache_wait_on_page_write+0x8b/0xa7 [fscache] [] ? autoremove_wake_function+0x0/0x34 [] ? __fscache_check_page_write+0x63/0x70 [fscache] [] nfs_fscache_release_page+0x4e/0xc4 [nfs] [] nfs_release_page+0x3c/0x41 [nfs] [] try_to_release_page+0x32/0x3b [] shrink_page_list+0x316/0x4ac [] shrink_inactive_list+0x392/0x67c [] ? __mutex_unlock_slowpath+0x100/0x10b [] ? trace_hardirqs_on_caller+0x10c/0x130 [] ? mutex_unlock+0x9/0xb [] shrink_list+0x8d/0x8f [] shrink_zone+0x278/0x33c [] ? ktime_get_ts+0xad/0xba [] try_to_free_pages+0x22e/0x392 [] ? isolate_pages_global+0x0/0x212 [] __alloc_pages_nodemask+0x3dc/0x5cf [] grab_cache_page_write_begin+0x65/0xaa [] ext3_write_begin+0x78/0x1eb [] generic_file_buffered_write+0x109/0x28c [] ? current_fs_time+0x22/0x29 [] __generic_file_aio_write+0x350/0x385 [] ? generic_file_aio_write+0x4a/0xae [] generic_file_aio_write+0x60/0xae [] do_sync_write+0xe3/0x120 [] ? autoremove_wake_function+0x0/0x34 [] ? __dentry_open+0x1a5/0x2b8 [] ? dentry_open+0x82/0x89 [] cachefiles_write_page+0x298/0x335 [cachefiles] [] fscache_write_op+0x178/0x2c2 [fscache] [] fscache_op_execute+0x7a/0xd1 [fscache] [] slow_work_execute+0x18f/0x2d1 [] slow_work_thread+0x1c5/0x308 [] ? autoremove_wake_function+0x0/0x34 [] ? slow_work_thread+0x0/0x308 [] kthread+0x7a/0x82 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? tg_shares_up+0x171/0x227 [] ? kthread+0x0/0x82 [] ? child_rip+0x0/0x20 In the above backtrace, the following is happening: (1) A page storage operation is being executed by a slow-work thread (fscache_write_op()). (2) FS-Cache farms the operation out to the cache to perform (cachefiles_write_page()). (3) CacheFiles is then calling Ext3 to perform the actual write, using Ext3's standard write (do_sync_write()) under KERNEL_DS directly from the netfs page. (4) However, for Ext3 to perform the write, it must allocate some memory, in particular, it must allocate at least one page cache page into which it can copy the data from the netfs page. (5) Under OOM conditions, the memory allocator can't immediately come up with a page, so it uses vmscan to find something to discard (try_to_free_pages()). (6) vmscan finds a clean netfs page it might be able to discard (possibly the one it's trying to write out). (7) The netfs is called to throw the page away (nfs_release_page()) - but it's called with __GFP_WAIT, so the netfs decides to wait for the store to complete (__fscache_wait_on_page_write()). (8) This blocks a slow-work processing thread - possibly against itself. The system ends up stuck because it can't write out any netfs pages to the cache without allocating more memory. To avoid this, we make FS-Cache cancel some writes that aren't in the middle of actually being performed. This means that some data won't make it into the cache this time. To support this, a new FS-Cache function is added fscache_maybe_release_page() that replaces what the netfs releasepage() functions used to do with respect to the cache. The decisions fscache_maybe_release_page() makes are counted and displayed through /proc/fs/fscache/stats on a line labelled "VmScan". There are four counters provided: "nos=N" - pages that weren't pending storage; "gon=N" - pages that were pending storage when we first looked, but weren't by the time we got the object lock; "bsy=N" - pages that we ignored as they were actively being written when we looked; and "can=N" - pages that we cancelled the storage of. What I'd really like to do is alter the behaviour of the cancellation heuristics, depending on how necessary it is to expel pages. If there are plenty of other pages that aren't waiting to be written to the cache that could be ejected first, then it would be nice to hold up on immediate cancellation of cache writes - but I don't see a way of doing that. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 4 + .../filesystems/caching/netfs-api.txt | 21 ++++- fs/9p/cache.c | 14 +--- fs/afs/file.c | 15 +--- fs/fscache/internal.h | 5 ++ fs/fscache/page.c | 79 ++++++++++++++++++- fs/fscache/stats.c | 11 +++ fs/nfs/fscache.c | 10 +-- include/linux/fscache-cache.h | 1 + include/linux/fscache.h | 27 +++++++ 10 files changed, 152 insertions(+), 35 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 057a3c71d52..7097fd29fb3 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -272,6 +272,10 @@ proc files. pgs=N Number of pages given store req processing time rxd=N Number of store reqs deleted from tracking tree olm=N Number of store reqs over store limit + VmScan nos=N Number of release reqs against pages with no pending store + gon=N Number of release reqs against pages stored by time lock granted + bsy=N Number of release reqs ignored due to in-progress store + can=N Number of page stores cancelled due to release req Ops pend=N Number of times async ops added to pending queues run=N Number of times async ops given CPU time enq=N Number of times async ops queued for processing diff --git a/Documentation/filesystems/caching/netfs-api.txt b/Documentation/filesystems/caching/netfs-api.txt index 2666b1ed5e9..1902c57b72e 100644 --- a/Documentation/filesystems/caching/netfs-api.txt +++ b/Documentation/filesystems/caching/netfs-api.txt @@ -641,7 +641,7 @@ data file must be retired (see the relinquish cookie function below). Furthermore, note that this does not cancel the asynchronous read or write operation started by the read/alloc and write functions, so the page -invalidation and release functions must use: +invalidation functions must use: bool fscache_check_page_write(struct fscache_cookie *cookie, struct page *page); @@ -654,6 +654,25 @@ to see if a page is being written to the cache, and: to wait for it to finish if it is. +When releasepage() is being implemented, a special FS-Cache function exists to +manage the heuristics of coping with vmscan trying to eject pages, which may +conflict with the cache trying to write pages to the cache (which may itself +need to allocate memory): + + bool fscache_maybe_release_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp); + +This takes the netfs cookie, and the page and gfp arguments as supplied to +releasepage(). It will return false if the page cannot be released yet for +some reason and if it returns true, the page has been uncached and can now be +released. + +To make a page available for release, this function may wait for an outstanding +storage request to complete, or it may attempt to cancel the storage request - +in which case the page will not be stored in the cache this time. + + ========================== INDEX AND DATA FILE UPDATE ========================== diff --git a/fs/9p/cache.c b/fs/9p/cache.c index 51c94e26a34..bcc5357a906 100644 --- a/fs/9p/cache.c +++ b/fs/9p/cache.c @@ -343,18 +343,7 @@ int __v9fs_fscache_release_page(struct page *page, gfp_t gfp) BUG_ON(!vcookie->fscache); - if (PageFsCache(page)) { - if (fscache_check_page_write(vcookie->fscache, page)) { - if (!(gfp & __GFP_WAIT)) - return 0; - fscache_wait_on_page_write(vcookie->fscache, page); - } - - fscache_uncache_page(vcookie->fscache, page); - ClearPageFsCache(page); - } - - return 1; + return fscache_maybe_release_page(vnode->cache, page, gfp); } void __v9fs_fscache_invalidate_page(struct page *page) @@ -368,7 +357,6 @@ void __v9fs_fscache_invalidate_page(struct page *page) fscache_wait_on_page_write(vcookie->fscache, page); BUG_ON(!PageLocked(page)); fscache_uncache_page(vcookie->fscache, page); - ClearPageFsCache(page); } } diff --git a/fs/afs/file.c b/fs/afs/file.c index 681c2a7b013..39b301662f2 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -315,7 +315,6 @@ static void afs_invalidatepage(struct page *page, unsigned long offset) struct afs_vnode *vnode = AFS_FS_I(page->mapping->host); fscache_wait_on_page_write(vnode->cache, page); fscache_uncache_page(vnode->cache, page); - ClearPageFsCache(page); } #endif @@ -349,17 +348,9 @@ static int afs_releasepage(struct page *page, gfp_t gfp_flags) /* deny if page is being written to the cache and the caller hasn't * elected to wait */ #ifdef CONFIG_AFS_FSCACHE - if (PageFsCache(page)) { - if (fscache_check_page_write(vnode->cache, page)) { - if (!(gfp_flags & __GFP_WAIT)) { - _leave(" = F [cache busy]"); - return 0; - } - fscache_wait_on_page_write(vnode->cache, page); - } - - fscache_uncache_page(vnode->cache, page); - ClearPageFsCache(page); + if (!fscache_maybe_release_page(vnode->cache, page, gfp_flags)) { + _leave(" = F [cache busy]"); + return 0; } #endif diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index a0769872b19..e5046519b15 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -180,6 +180,11 @@ extern atomic_t fscache_n_store_pages; extern atomic_t fscache_n_store_radix_deletes; extern atomic_t fscache_n_store_pages_over_limit; +extern atomic_t fscache_n_store_vmscan_not_storing; +extern atomic_t fscache_n_store_vmscan_gone; +extern atomic_t fscache_n_store_vmscan_busy; +extern atomic_t fscache_n_store_vmscan_cancelled; + extern atomic_t fscache_n_marks; extern atomic_t fscache_n_uncaches; diff --git a/fs/fscache/page.c b/fs/fscache/page.c index 022a5da8e13..fc76798bd96 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -42,6 +42,75 @@ void __fscache_wait_on_page_write(struct fscache_cookie *cookie, struct page *pa } EXPORT_SYMBOL(__fscache_wait_on_page_write); +/* + * decide whether a page can be released, possibly by cancelling a store to it + * - we're allowed to sleep if __GFP_WAIT is flagged + */ +bool __fscache_maybe_release_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp) +{ + struct page *xpage; + void *val; + + _enter("%p,%p,%x", cookie, page, gfp); + + rcu_read_lock(); + val = radix_tree_lookup(&cookie->stores, page->index); + if (!val) { + rcu_read_unlock(); + fscache_stat(&fscache_n_store_vmscan_not_storing); + __fscache_uncache_page(cookie, page); + return true; + } + + /* see if the page is actually undergoing storage - if so we can't get + * rid of it till the cache has finished with it */ + if (radix_tree_tag_get(&cookie->stores, page->index, + FSCACHE_COOKIE_STORING_TAG)) { + rcu_read_unlock(); + goto page_busy; + } + + /* the page is pending storage, so we attempt to cancel the store and + * discard the store request so that the page can be reclaimed */ + spin_lock(&cookie->stores_lock); + rcu_read_unlock(); + + if (radix_tree_tag_get(&cookie->stores, page->index, + FSCACHE_COOKIE_STORING_TAG)) { + /* the page started to undergo storage whilst we were looking, + * so now we can only wait or return */ + spin_unlock(&cookie->stores_lock); + goto page_busy; + } + + xpage = radix_tree_delete(&cookie->stores, page->index); + spin_unlock(&cookie->stores_lock); + + if (xpage) { + fscache_stat(&fscache_n_store_vmscan_cancelled); + fscache_stat(&fscache_n_store_radix_deletes); + ASSERTCMP(xpage, ==, page); + } else { + fscache_stat(&fscache_n_store_vmscan_gone); + } + + wake_up_bit(&cookie->flags, 0); + if (xpage) + page_cache_release(xpage); + __fscache_uncache_page(cookie, page); + return true; + +page_busy: + /* we might want to wait here, but that could deadlock the allocator as + * the slow-work threads writing to the cache may all end up sleeping + * on memory allocation */ + fscache_stat(&fscache_n_store_vmscan_busy); + return false; +} +EXPORT_SYMBOL(__fscache_maybe_release_page); + /* * note that a page has finished being written to the cache */ @@ -57,6 +126,8 @@ static void fscache_end_page_write(struct fscache_object *object, /* delete the page from the tree if it is now no longer * pending */ spin_lock(&cookie->stores_lock); + radix_tree_tag_clear(&cookie->stores, page->index, + FSCACHE_COOKIE_STORING_TAG); if (!radix_tree_tag_get(&cookie->stores, page->index, FSCACHE_COOKIE_PENDING_TAG)) { fscache_stat(&fscache_n_store_radix_deletes); @@ -640,8 +711,12 @@ static void fscache_write_op(struct fscache_operation *_op) goto superseded; } - radix_tree_tag_clear(&cookie->stores, page->index, - FSCACHE_COOKIE_PENDING_TAG); + if (page) { + radix_tree_tag_set(&cookie->stores, page->index, + FSCACHE_COOKIE_STORING_TAG); + radix_tree_tag_clear(&cookie->stores, page->index, + FSCACHE_COOKIE_PENDING_TAG); + } spin_unlock(&cookie->stores_lock); spin_unlock(&object->lock); diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 045ba396dbf..cda69994e06 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -63,6 +63,11 @@ atomic_t fscache_n_store_pages; atomic_t fscache_n_store_radix_deletes; atomic_t fscache_n_store_pages_over_limit; +atomic_t fscache_n_store_vmscan_not_storing; +atomic_t fscache_n_store_vmscan_gone; +atomic_t fscache_n_store_vmscan_busy; +atomic_t fscache_n_store_vmscan_cancelled; + atomic_t fscache_n_marks; atomic_t fscache_n_uncaches; @@ -211,6 +216,12 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_store_radix_deletes), atomic_read(&fscache_n_store_pages_over_limit)); + seq_printf(m, "VmScan : nos=%u gon=%u bsy=%u can=%u\n", + atomic_read(&fscache_n_store_vmscan_not_storing), + atomic_read(&fscache_n_store_vmscan_gone), + atomic_read(&fscache_n_store_vmscan_busy), + atomic_read(&fscache_n_store_vmscan_cancelled)); + seq_printf(m, "Ops : pend=%u run=%u enq=%u can=%u rej=%u\n", atomic_read(&fscache_n_op_pend), atomic_read(&fscache_n_op_run), diff --git a/fs/nfs/fscache.c b/fs/nfs/fscache.c index 70fad69eb95..fa588006588 100644 --- a/fs/nfs/fscache.c +++ b/fs/nfs/fscache.c @@ -359,17 +359,13 @@ int nfs_fscache_release_page(struct page *page, gfp_t gfp) BUG_ON(!cookie); - if (fscache_check_page_write(cookie, page)) { - if (!(gfp & __GFP_WAIT)) - return 0; - fscache_wait_on_page_write(cookie, page); - } - if (PageFsCache(page)) { dfprintk(FSCACHE, "NFS: fscache releasepage (0x%p/0x%p/0x%p)\n", cookie, page, nfsi); - fscache_uncache_page(cookie, page); + if (!fscache_maybe_release_page(cookie, page, gfp)) + return 0; + nfs_add_fscache_stats(page->mapping->host, NFSIOS_FSCACHE_PAGES_UNCACHED, 1); } diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index f3aa4bdafef..4750d5fb419 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -317,6 +317,7 @@ struct fscache_cookie { void *netfs_data; /* back pointer to netfs */ struct radix_tree_root stores; /* pages to be stored on this cookie */ #define FSCACHE_COOKIE_PENDING_TAG 0 /* pages tag: pending write to cache */ +#define FSCACHE_COOKIE_STORING_TAG 1 /* pages tag: writing to cache */ unsigned long flags; #define FSCACHE_COOKIE_LOOKING_UP 0 /* T if non-index cookie being looked up still */ diff --git a/include/linux/fscache.h b/include/linux/fscache.h index 6d8ee466e0a..595ce49288b 100644 --- a/include/linux/fscache.h +++ b/include/linux/fscache.h @@ -202,6 +202,8 @@ extern int __fscache_write_page(struct fscache_cookie *, struct page *, gfp_t); extern void __fscache_uncache_page(struct fscache_cookie *, struct page *); extern bool __fscache_check_page_write(struct fscache_cookie *, struct page *); extern void __fscache_wait_on_page_write(struct fscache_cookie *, struct page *); +extern bool __fscache_maybe_release_page(struct fscache_cookie *, struct page *, + gfp_t); /** * fscache_register_netfs - Register a filesystem as desiring caching services @@ -615,4 +617,29 @@ void fscache_wait_on_page_write(struct fscache_cookie *cookie, __fscache_wait_on_page_write(cookie, page); } +/** + * fscache_maybe_release_page - Consider releasing a page, cancelling a store + * @cookie: The cookie representing the cache object + * @page: The netfs page that is being cached. + * @gfp: The gfp flags passed to releasepage() + * + * Consider releasing a page for the vmscan algorithm, on behalf of the netfs's + * releasepage() call. A storage request on the page may cancelled if it is + * not currently being processed. + * + * The function returns true if the page no longer has a storage request on it, + * and false if a storage request is left in place. If true is returned, the + * page will have been passed to fscache_uncache_page(). If false is returned + * the page cannot be freed yet. + */ +static inline +bool fscache_maybe_release_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp) +{ + if (fscache_cookie_valid(cookie) && PageFsCache(page)) + return __fscache_maybe_release_page(cookie, page, gfp); + return false; +} + #endif /* _LINUX_FSCACHE_H */ -- GitLab From 2175bb06dc6cf2af9c098a1770561f9e63edae4e Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:38 +0000 Subject: [PATCH 0964/1165] FS-Cache: Add a retirement stat counter Add a stat counter to count retirement events rather than ordinary release events (the retire argument to fscache_relinquish_cookie()). Signed-off-by: David Howells --- fs/fscache/cookie.c | 2 ++ fs/fscache/internal.h | 1 + fs/fscache/stats.c | 6 ++++-- 3 files changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/fscache/cookie.c b/fs/fscache/cookie.c index f979659c1b3..990535071a8 100644 --- a/fs/fscache/cookie.c +++ b/fs/fscache/cookie.c @@ -415,6 +415,8 @@ void __fscache_relinquish_cookie(struct fscache_cookie *cookie, int retire) unsigned long event; fscache_stat(&fscache_n_relinquishes); + if (retire) + fscache_stat(&fscache_n_relinquishes_retire); if (!cookie) { fscache_stat(&fscache_n_relinquishes_null); diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index e5046519b15..2bf463d2608 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -202,6 +202,7 @@ extern atomic_t fscache_n_updates_run; extern atomic_t fscache_n_relinquishes; extern atomic_t fscache_n_relinquishes_null; extern atomic_t fscache_n_relinquishes_waitcrt; +extern atomic_t fscache_n_relinquishes_retire; extern atomic_t fscache_n_cookie_index; extern atomic_t fscache_n_cookie_data; diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index cda69994e06..9e15289eb5c 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -85,6 +85,7 @@ atomic_t fscache_n_updates_run; atomic_t fscache_n_relinquishes; atomic_t fscache_n_relinquishes_null; atomic_t fscache_n_relinquishes_waitcrt; +atomic_t fscache_n_relinquishes_retire; atomic_t fscache_n_cookie_index; atomic_t fscache_n_cookie_data; @@ -168,10 +169,11 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_updates_null), atomic_read(&fscache_n_updates_run)); - seq_printf(m, "Relinqs: n=%u nul=%u wcr=%u\n", + seq_printf(m, "Relinqs: n=%u nul=%u wcr=%u rtr=%u\n", atomic_read(&fscache_n_relinquishes), atomic_read(&fscache_n_relinquishes_null), - atomic_read(&fscache_n_relinquishes_waitcrt)); + atomic_read(&fscache_n_relinquishes_waitcrt), + atomic_read(&fscache_n_relinquishes_retire)); seq_printf(m, "AttrChg: n=%u ok=%u nbf=%u oom=%u run=%u\n", atomic_read(&fscache_n_attr_changed), -- GitLab From d461d26dde901b0523c46b0317e7fccf574a3933 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:41 +0000 Subject: [PATCH 0965/1165] FS-Cache: Make sure FSCACHE_COOKIE_LOOKING_UP cleared on lookup failure We must make sure that FSCACHE_COOKIE_LOOKING_UP is cleared on lookup failure (if an object reaches the LC_DYING state), and we should clear it before clearing FSCACHE_COOKIE_CREATING. If this doesn't happen then fscache_wait_for_deferred_lookup() may hold allocation and retrieval operations indefinitely until they're interrupted by signals - which in turn pins the dying object until they go away. Signed-off-by: David Howells --- fs/fscache/object.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 1a1afa82f79..74bc562a2cb 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -105,6 +105,7 @@ static inline void fscache_done_parent_op(struct fscache_object *object) static void fscache_object_state_machine(struct fscache_object *object) { enum fscache_object_state new_state; + struct fscache_cookie *cookie; ASSERT(object != NULL); @@ -158,11 +159,17 @@ static void fscache_object_state_machine(struct fscache_object *object) spin_lock(&object->lock); object->state = FSCACHE_OBJECT_DYING; - if (object->cookie && - test_and_clear_bit(FSCACHE_COOKIE_CREATING, - &object->cookie->flags)) - wake_up_bit(&object->cookie->flags, - FSCACHE_COOKIE_CREATING); + cookie = object->cookie; + if (cookie) { + if (test_and_clear_bit(FSCACHE_COOKIE_LOOKING_UP, + &cookie->flags)) + wake_up_bit(&cookie->flags, + FSCACHE_COOKIE_LOOKING_UP); + if (test_and_clear_bit(FSCACHE_COOKIE_CREATING, + &cookie->flags)) + wake_up_bit(&cookie->flags, + FSCACHE_COOKIE_CREATING); + } spin_unlock(&object->lock); fscache_done_parent_op(object); -- GitLab From 60d543ca724be155c2b6166e36a00c80b21bd810 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:45 +0000 Subject: [PATCH 0966/1165] FS-Cache: Start processing an object's operations on that object's death Start processing an object's operations when that object moves into the DYING state as the object cannot be destroyed until all its outstanding operations have completed. Furthermore, make sure that read and allocation operations handle being woken up on a dead object. Such events are recorded in the Allocs.abt and Retrvls.abt statistics as viewable through /proc/fs/fscache/stats. The code for waiting for object activation for the read and allocation operations is also extracted into its own function as it is much the same in all cases, differing only in the stats incremented. Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 2 + fs/fscache/internal.h | 5 + fs/fscache/object.c | 1 + fs/fscache/page.c | 112 +++++++++--------- fs/fscache/stats.c | 12 +- include/linux/fscache-cache.h | 4 + 6 files changed, 75 insertions(+), 61 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 7097fd29fb3..3c23411956b 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -253,6 +253,7 @@ proc files. int=N Number of alloc reqs aborted -ERESTARTSYS ops=N Number of alloc reqs submitted owt=N Number of alloc reqs waited for CPU time + abt=N Number of alloc reqs aborted due to object death Retrvls n=N Number of retrieval (read) requests seen ok=N Number of successful retr reqs wt=N Number of retr reqs that waited on lookup completion @@ -262,6 +263,7 @@ proc files. oom=N Number of retr reqs failed -ENOMEM ops=N Number of retr reqs submitted owt=N Number of retr reqs waited for CPU time + abt=N Number of retr reqs aborted due to object death Stores n=N Number of storage (write) requests seen ok=N Number of successful store reqs agn=N Number of store reqs on a page already pending storage diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index 2bf463d2608..5b49a373689 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -156,6 +156,7 @@ extern atomic_t fscache_n_allocs_ok; extern atomic_t fscache_n_allocs_wait; extern atomic_t fscache_n_allocs_nobufs; extern atomic_t fscache_n_allocs_intr; +extern atomic_t fscache_n_allocs_object_dead; extern atomic_t fscache_n_alloc_ops; extern atomic_t fscache_n_alloc_op_waits; @@ -166,6 +167,7 @@ extern atomic_t fscache_n_retrievals_nodata; extern atomic_t fscache_n_retrievals_nobufs; extern atomic_t fscache_n_retrievals_intr; extern atomic_t fscache_n_retrievals_nomem; +extern atomic_t fscache_n_retrievals_object_dead; extern atomic_t fscache_n_retrieval_ops; extern atomic_t fscache_n_retrieval_op_waits; @@ -249,9 +251,12 @@ static inline void fscache_stat_d(atomic_t *stat) atomic_dec(stat); } +#define __fscache_stat(stat) (stat) + extern const struct file_operations fscache_stats_fops; #else +#define __fscache_stat(stat) (NULL) #define fscache_stat(stat) do {} while (0) #endif diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 74bc562a2cb..c85c9f58216 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -201,6 +201,7 @@ static void fscache_object_state_machine(struct fscache_object *object) } spin_unlock(&object->lock); fscache_enqueue_dependents(object); + fscache_start_operations(object); goto terminal_transit; /* handle an abort during initialisation */ diff --git a/fs/fscache/page.c b/fs/fscache/page.c index fc76798bd96..c598ea4c4e7 100644 --- a/fs/fscache/page.c +++ b/fs/fscache/page.c @@ -313,6 +313,43 @@ static int fscache_wait_for_deferred_lookup(struct fscache_cookie *cookie) return 0; } +/* + * wait for an object to become active (or dead) + */ +static int fscache_wait_for_retrieval_activation(struct fscache_object *object, + struct fscache_retrieval *op, + atomic_t *stat_op_waits, + atomic_t *stat_object_dead) +{ + int ret; + + if (!test_bit(FSCACHE_OP_WAITING, &op->op.flags)) + goto check_if_dead; + + _debug(">>> WT"); + fscache_stat(stat_op_waits); + if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit_interruptible, + TASK_INTERRUPTIBLE) < 0) { + ret = fscache_cancel_op(&op->op); + if (ret == 0) + return -ERESTARTSYS; + + /* it's been removed from the pending queue by another party, + * so we should get to run shortly */ + wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, + fscache_wait_bit, TASK_UNINTERRUPTIBLE); + } + _debug("<<< GO"); + +check_if_dead: + if (unlikely(fscache_object_is_dead(object))) { + fscache_stat(stat_object_dead); + return -ENOBUFS; + } + return 0; +} + /* * read a page from the cache or allocate a block in which to store it * - we return: @@ -376,25 +413,12 @@ int __fscache_read_or_alloc_page(struct fscache_cookie *cookie, /* we wait for the operation to become active, and then process it * *here*, in this thread, and not in the thread pool */ - if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { - _debug(">>> WT"); - fscache_stat(&fscache_n_retrieval_op_waits); - if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit_interruptible, - TASK_INTERRUPTIBLE) < 0) { - ret = fscache_cancel_op(&op->op); - if (ret == 0) { - ret = -ERESTARTSYS; - goto error; - } - - /* it's been removed from the pending queue by another - * party, so we should get to run shortly */ - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); - } - _debug("<<< GO"); - } + ret = fscache_wait_for_retrieval_activation( + object, op, + __fscache_stat(&fscache_n_retrieval_op_waits), + __fscache_stat(&fscache_n_retrievals_object_dead)); + if (ret < 0) + goto error; /* ask the cache to honour the operation */ if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) { @@ -506,25 +530,12 @@ int __fscache_read_or_alloc_pages(struct fscache_cookie *cookie, /* we wait for the operation to become active, and then process it * *here*, in this thread, and not in the thread pool */ - if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { - _debug(">>> WT"); - fscache_stat(&fscache_n_retrieval_op_waits); - if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit_interruptible, - TASK_INTERRUPTIBLE) < 0) { - ret = fscache_cancel_op(&op->op); - if (ret == 0) { - ret = -ERESTARTSYS; - goto error; - } - - /* it's been removed from the pending queue by another - * party, so we should get to run shortly */ - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); - } - _debug("<<< GO"); - } + ret = fscache_wait_for_retrieval_activation( + object, op, + __fscache_stat(&fscache_n_retrieval_op_waits), + __fscache_stat(&fscache_n_retrievals_object_dead)); + if (ret < 0) + goto error; /* ask the cache to honour the operation */ if (test_bit(FSCACHE_COOKIE_NO_DATA_YET, &object->cookie->flags)) { @@ -612,25 +623,12 @@ int __fscache_alloc_page(struct fscache_cookie *cookie, fscache_stat(&fscache_n_alloc_ops); - if (test_bit(FSCACHE_OP_WAITING, &op->op.flags)) { - _debug(">>> WT"); - fscache_stat(&fscache_n_alloc_op_waits); - if (wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit_interruptible, - TASK_INTERRUPTIBLE) < 0) { - ret = fscache_cancel_op(&op->op); - if (ret == 0) { - ret = -ERESTARTSYS; - goto error; - } - - /* it's been removed from the pending queue by another - * party, so we should get to run shortly */ - wait_on_bit(&op->op.flags, FSCACHE_OP_WAITING, - fscache_wait_bit, TASK_UNINTERRUPTIBLE); - } - _debug("<<< GO"); - } + ret = fscache_wait_for_retrieval_activation( + object, op, + __fscache_stat(&fscache_n_alloc_op_waits), + __fscache_stat(&fscache_n_allocs_object_dead)); + if (ret < 0) + goto error; /* ask the cache to honour the operation */ fscache_stat(&fscache_n_cop_allocate_page); diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 9e15289eb5c..05f77caf4a2 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -39,6 +39,7 @@ atomic_t fscache_n_allocs_ok; atomic_t fscache_n_allocs_wait; atomic_t fscache_n_allocs_nobufs; atomic_t fscache_n_allocs_intr; +atomic_t fscache_n_allocs_object_dead; atomic_t fscache_n_alloc_ops; atomic_t fscache_n_alloc_op_waits; @@ -49,6 +50,7 @@ atomic_t fscache_n_retrievals_nodata; atomic_t fscache_n_retrievals_nobufs; atomic_t fscache_n_retrievals_intr; atomic_t fscache_n_retrievals_nomem; +atomic_t fscache_n_retrievals_object_dead; atomic_t fscache_n_retrieval_ops; atomic_t fscache_n_retrieval_op_waits; @@ -188,9 +190,10 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_allocs_wait), atomic_read(&fscache_n_allocs_nobufs), atomic_read(&fscache_n_allocs_intr)); - seq_printf(m, "Allocs : ops=%u owt=%u\n", + seq_printf(m, "Allocs : ops=%u owt=%u abt=%u\n", atomic_read(&fscache_n_alloc_ops), - atomic_read(&fscache_n_alloc_op_waits)); + atomic_read(&fscache_n_alloc_op_waits), + atomic_read(&fscache_n_allocs_object_dead)); seq_printf(m, "Retrvls: n=%u ok=%u wt=%u nod=%u nbf=%u" " int=%u oom=%u\n", @@ -201,9 +204,10 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_retrievals_nobufs), atomic_read(&fscache_n_retrievals_intr), atomic_read(&fscache_n_retrievals_nomem)); - seq_printf(m, "Retrvls: ops=%u owt=%u\n", + seq_printf(m, "Retrvls: ops=%u owt=%u abt=%u\n", atomic_read(&fscache_n_retrieval_ops), - atomic_read(&fscache_n_retrieval_op_waits)); + atomic_read(&fscache_n_retrieval_op_waits), + atomic_read(&fscache_n_retrievals_object_dead)); seq_printf(m, "Stores : n=%u ok=%u agn=%u nbf=%u oom=%u\n", atomic_read(&fscache_n_stores), diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 4750d5fb419..907bb56c588 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -404,6 +404,10 @@ extern const char *fscache_object_states[]; (obj)->state >= FSCACHE_OBJECT_AVAILABLE && \ (obj)->state < FSCACHE_OBJECT_DYING) +#define fscache_object_is_dead(obj) \ + (test_bit(FSCACHE_IOERROR, &(obj)->cache->flags) && \ + (obj)->state >= FSCACHE_OBJECT_DYING) + extern const struct slow_work_ops fscache_object_slow_work_ops; /** -- GitLab From 868411be3f445a83fafbd734f3e426400138add5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:48 +0000 Subject: [PATCH 0967/1165] FS-Cache: Actually requeue an object when requested FS-Cache objects have an FSCACHE_OBJECT_EV_REQUEUE event that can theoretically be raised to ask the state machine to requeue the object for further processing before the work function returns to the slow-work facility. However, fscache_object_work_execute() was clearing that bit before checking the event mask to see whether the object has any pending events that require it to be requeued immediately. Instead, the bit should be cleared after the check and enqueue. Signed-off-by: David Howells --- fs/fscache/object.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/fscache/object.c b/fs/fscache/object.c index c85c9f58216..f3f952cf887 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -353,13 +353,12 @@ static void fscache_object_slow_work_execute(struct slow_work *work) _enter("{OBJ%x}", object->debug_id); - clear_bit(FSCACHE_OBJECT_EV_REQUEUE, &object->events); - start = jiffies; fscache_object_state_machine(object); fscache_hist(fscache_objs_histogram, start); if (object->events & object->event_mask) fscache_enqueue_object(object); + clear_bit(FSCACHE_OBJECT_EV_REQUEUE, &object->events); } /* -- GitLab From a17754fb8c28af19cd70dcbec6d5b0773b94e0c1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:52 +0000 Subject: [PATCH 0968/1165] CacheFiles: Don't write a full page if there's only a partial page to cache cachefiles_write_page() writes a full page to the backing file for the last page of the netfs file, even if the netfs file's last page is only a partial page. This causes the EOF on the backing file to be extended beyond the EOF of the netfs, and thus the backing file will be truncated by cachefiles_attr_changed() called from cachefiles_lookup_object(). So we need to limit the write we make to the backing file on that last page such that it doesn't push the EOF too far. Also, if a backing file that has a partial page at the end is expanded, we discard the partial page and refetch it on the basis that we then have a hole in the file with invalid data, and should the power go out... A better way to deal with this could be to record a note that the partial page contains invalid data until the correct data is written into it. This isn't a problem for netfs's that discard the whole backing file if the file size changes (such as NFS). Signed-off-by: David Howells --- fs/cachefiles/interface.c | 20 +++++++++++++++++--- fs/cachefiles/rdwr.c | 23 +++++++++++++++++++---- include/linux/fscache-cache.h | 3 +++ 3 files changed, 39 insertions(+), 7 deletions(-) diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c index dd7f852746c..8e67abf0598 100644 --- a/fs/cachefiles/interface.c +++ b/fs/cachefiles/interface.c @@ -404,12 +404,26 @@ static int cachefiles_attr_changed(struct fscache_object *_object) if (oi_size == ni_size) return 0; - newattrs.ia_size = ni_size; - newattrs.ia_valid = ATTR_SIZE; - cachefiles_begin_secure(cache, &saved_cred); mutex_lock(&object->backer->d_inode->i_mutex); + + /* if there's an extension to a partial page at the end of the backing + * file, we need to discard the partial page so that we pick up new + * data after it */ + if (oi_size & ~PAGE_MASK && ni_size > oi_size) { + _debug("discard tail %llx", oi_size); + newattrs.ia_valid = ATTR_SIZE; + newattrs.ia_size = oi_size & PAGE_MASK; + ret = notify_change(object->backer, &newattrs); + if (ret < 0) + goto truncate_failed; + } + + newattrs.ia_valid = ATTR_SIZE; + newattrs.ia_size = ni_size; ret = notify_change(object->backer, &newattrs); + +truncate_failed: mutex_unlock(&object->backer->d_inode->i_mutex); cachefiles_end_secure(cache, saved_cred); diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index 3304646dae8..5a84fd7109a 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -803,7 +803,8 @@ int cachefiles_write_page(struct fscache_storage *op, struct page *page) struct cachefiles_cache *cache; mm_segment_t old_fs; struct file *file; - loff_t pos; + loff_t pos, eof; + size_t len; void *data; int ret; @@ -837,15 +838,29 @@ int cachefiles_write_page(struct fscache_storage *op, struct page *page) ret = -EIO; if (file->f_op->write) { pos = (loff_t) page->index << PAGE_SHIFT; + + /* we mustn't write more data than we have, so we have + * to beware of a partial page at EOF */ + eof = object->fscache.store_limit_l; + len = PAGE_SIZE; + if (eof & ~PAGE_MASK) { + ASSERTCMP(pos, <, eof); + if (eof - pos < PAGE_SIZE) { + _debug("cut short %llx to %llx", + pos, eof); + len = eof - pos; + ASSERTCMP(pos + len, ==, eof); + } + } + data = kmap(page); old_fs = get_fs(); set_fs(KERNEL_DS); ret = file->f_op->write( - file, (const void __user *) data, PAGE_SIZE, - &pos); + file, (const void __user *) data, len, &pos); set_fs(old_fs); kunmap(page); - if (ret != PAGE_SIZE) + if (ret != len) ret = -EIO; } fput(file); diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 907bb56c588..5db50002f3b 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -395,6 +395,7 @@ struct fscache_object { struct rb_node objlist_link; /* link in global object list */ #endif pgoff_t store_limit; /* current storage limit */ + loff_t store_limit_l; /* current storage limit */ }; extern const char *fscache_object_states[]; @@ -439,6 +440,7 @@ void fscache_object_init(struct fscache_object *object, object->events = object->event_mask = 0; object->flags = 0; object->store_limit = 0; + object->store_limit_l = 0; object->cache = cache; object->cookie = cookie; object->parent = NULL; @@ -491,6 +493,7 @@ static inline void fscache_object_lookup_error(struct fscache_object *object) static inline void fscache_set_store_limit(struct fscache_object *object, loff_t i_size) { + object->store_limit_l = i_size; object->store_limit = i_size >> PAGE_SHIFT; if (i_size & ~PAGE_MASK) object->store_limit++; -- GitLab From 5e929b33c3935ecb029b3e495356b2b8af432efa Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:55 +0000 Subject: [PATCH 0969/1165] CacheFiles: Handle truncate unlocking the page we're reading Handle truncate unlocking the page we're attempting to read from the backing device before the read has completed. This was causing reports like the following to occur: Pid: 4765, comm: kslowd Not tainted 2.6.30.1 #1 Call Trace: [] ? cachefiles_read_waiter+0xd9/0x147 [cachefiles] [] ? __wait_on_bit+0x60/0x6f [] ? __wake_up_common+0x3f/0x71 [] ? __wake_up+0x30/0x44 [] ? __wake_up_bit+0x28/0x2d [] ? ext3_truncate+0x4d7/0x8ed [ext3] [] ? pagevec_lookup+0x17/0x1f [] ? unmap_mapping_range+0x59/0x1ff [] ? __wake_up+0x30/0x44 [] ? vmtruncate+0xc2/0xe2 [] ? inode_setattr+0x22/0x10a [] ? ext3_setattr+0x17b/0x1e6 [ext3] [] ? notify_change+0x186/0x2c9 [] ? cachefiles_attr_changed+0x133/0x1cd [cachefiles] [] ? cachefiles_lookup_object+0xcf/0x12a [cachefiles] [] ? fscache_lookup_object+0x110/0x122 [fscache] [] ? fscache_object_slow_work_execute+0x590/0x6bc [fscache] [] ? slow_work_thread+0x285/0x43a [] ? autoremove_wake_function+0x0/0x2e [] ? slow_work_thread+0x0/0x43a [] ? kthread+0x54/0x81 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0x81 [] ? child_rip+0x0/0x20 CacheFiles: I/O Error: Readpage failed on backing file 200000000000810 FS-Cache: Cache cachefiles stopped due to I/O error Reported-by: Christian Kujau Reported-by: Takashi Iwai Reported-by: Duc Le Minh Signed-off-by: David Howells --- fs/cachefiles/rdwr.c | 99 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 93 insertions(+), 6 deletions(-) diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index 5a84fd7109a..1d833256386 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -40,8 +40,10 @@ static int cachefiles_read_waiter(wait_queue_t *wait, unsigned mode, _debug("--- monitor %p %lx ---", page, page->flags); - if (!PageUptodate(page) && !PageError(page)) - dump_stack(); + if (!PageUptodate(page) && !PageError(page)) { + /* unlocked, not uptodate and not erronous? */ + _debug("page probably truncated"); + } /* remove from the waitqueue */ list_del(&wait->task_list); @@ -60,6 +62,84 @@ static int cachefiles_read_waiter(wait_queue_t *wait, unsigned mode, return 0; } +/* + * handle a probably truncated page + * - check to see if the page is still relevant and reissue the read if + * possible + * - return -EIO on error, -ENODATA if the page is gone, -EINPROGRESS if we + * must wait again and 0 if successful + */ +static int cachefiles_read_reissue(struct cachefiles_object *object, + struct cachefiles_one_read *monitor) +{ + struct address_space *bmapping = object->backer->d_inode->i_mapping; + struct page *backpage = monitor->back_page, *backpage2; + int ret; + + kenter("{ino=%lx},{%lx,%lx}", + object->backer->d_inode->i_ino, + backpage->index, backpage->flags); + + /* skip if the page was truncated away completely */ + if (backpage->mapping != bmapping) { + kleave(" = -ENODATA [mapping]"); + return -ENODATA; + } + + backpage2 = find_get_page(bmapping, backpage->index); + if (!backpage2) { + kleave(" = -ENODATA [gone]"); + return -ENODATA; + } + + if (backpage != backpage2) { + put_page(backpage2); + kleave(" = -ENODATA [different]"); + return -ENODATA; + } + + /* the page is still there and we already have a ref on it, so we don't + * need a second */ + put_page(backpage2); + + INIT_LIST_HEAD(&monitor->op_link); + add_page_wait_queue(backpage, &monitor->monitor); + + if (trylock_page(backpage)) { + ret = -EIO; + if (PageError(backpage)) + goto unlock_discard; + ret = 0; + if (PageUptodate(backpage)) + goto unlock_discard; + + kdebug("reissue read"); + ret = bmapping->a_ops->readpage(NULL, backpage); + if (ret < 0) + goto unlock_discard; + } + + /* but the page may have been read before the monitor was installed, so + * the monitor may miss the event - so we have to ensure that we do get + * one in such a case */ + if (trylock_page(backpage)) { + _debug("jumpstart %p {%lx}", backpage, backpage->flags); + unlock_page(backpage); + } + + /* it'll reappear on the todo list */ + kleave(" = -EINPROGRESS"); + return -EINPROGRESS; + +unlock_discard: + unlock_page(backpage); + spin_lock_irq(&object->work_lock); + list_del(&monitor->op_link); + spin_unlock_irq(&object->work_lock); + kleave(" = %d", ret); + return ret; +} + /* * copy data from backing pages to netfs pages to complete a read operation * - driven by FS-Cache's thread pool @@ -92,20 +172,26 @@ static void cachefiles_read_copier(struct fscache_operation *_op) _debug("- copy {%lu}", monitor->back_page->index); - error = -EIO; + recheck: if (PageUptodate(monitor->back_page)) { copy_highpage(monitor->netfs_page, monitor->back_page); pagevec_add(&pagevec, monitor->netfs_page); fscache_mark_pages_cached(monitor->op, &pagevec); error = 0; - } - - if (error) + } else if (!PageError(monitor->back_page)) { + /* the page has probably been truncated */ + error = cachefiles_read_reissue(object, monitor); + if (error == -EINPROGRESS) + goto next; + goto recheck; + } else { cachefiles_io_error_obj( object, "Readpage failed on backing file %lx", (unsigned long) monitor->back_page->flags); + error = -EIO; + } page_cache_release(monitor->back_page); @@ -114,6 +200,7 @@ static void cachefiles_read_copier(struct fscache_operation *_op) fscache_put_retrieval(op); kfree(monitor); + next: /* let the thread pool have some air occasionally */ max--; if (max < 0 || need_resched()) { -- GitLab From 6511de33c877a53b3df545bc06c29e0f272837ff Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:11:58 +0000 Subject: [PATCH 0970/1165] CacheFiles: Mark parent directory locks as I_MUTEX_PARENT to keep lockdep happy Mark parent directory locks as I_MUTEX_PARENT in the callers of cachefiles_bury_object() so that lockdep doesn't complain when that invokes vfs_unlink(): ============================================= [ INFO: possible recursive locking detected ] 2.6.32-rc6-cachefs #47 --------------------------------------------- kslowd002/3089 is trying to acquire lock: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [] vfs_unlink+0x8b/0x128 but task is already holding lock: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [] cachefiles_walk_to_object+0x1b0/0x831 [cachefiles] other info that might help us debug this: 1 lock held by kslowd002/3089: #0: (&sb->s_type->i_mutex_key#7){+.+.+.}, at: [] cachefiles_walk_to_object+0x1b0/0x831 [cachefiles] stack backtrace: Pid: 3089, comm: kslowd002 Not tainted 2.6.32-rc6-cachefs #47 Call Trace: [] __lock_acquire+0x1649/0x16e3 [] ? inode_has_perm+0x5f/0x61 [] lock_acquire+0x57/0x6d [] ? vfs_unlink+0x8b/0x128 [] mutex_lock_nested+0x54/0x292 [] ? vfs_unlink+0x8b/0x128 [] ? selinux_inode_permission+0x8e/0x90 [] ? security_inode_permission+0x1c/0x1e [] ? inode_permission+0x99/0xa5 [] vfs_unlink+0x8b/0x128 [] ? kfree+0xed/0xf9 [] cachefiles_bury_object+0xb6/0x420 [cachefiles] [] ? trace_hardirqs_on+0xd/0xf [] ? cachefiles_check_object_xattr+0x233/0x293 [cachefiles] [] cachefiles_walk_to_object+0x4ff/0x831 [cachefiles] [] ? finish_task_switch+0x0/0xb2 [] cachefiles_lookup_object+0xac/0x12a [cachefiles] [] fscache_lookup_object+0x1c7/0x214 [fscache] [] fscache_object_state_machine+0xa5/0x52d [fscache] [] fscache_object_slow_work_execute+0x5f/0xa0 [fscache] [] slow_work_execute+0x18f/0x2d1 [] slow_work_thread+0x1c5/0x308 [] ? autoremove_wake_function+0x0/0x34 [] ? slow_work_thread+0x0/0x308 [] kthread+0x7a/0x82 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x82 [] ? child_rip+0x0/0x20 Signed-off-by: Daivd Howells --- fs/cachefiles/namei.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index 4ce818ae39e..3df86952ca6 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -254,7 +254,7 @@ int cachefiles_delete_object(struct cachefiles_cache *cache, dir = dget_parent(object->dentry); - mutex_lock(&dir->d_inode->i_mutex); + mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT); ret = cachefiles_bury_object(cache, dir, object->dentry); dput(dir); @@ -307,7 +307,7 @@ lookup_again: /* search the current directory for the element name */ _debug("lookup '%s'", name); - mutex_lock(&dir->d_inode->i_mutex); + mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT); start = jiffies; next = lookup_one_len(name, dir, nlen); -- GitLab From d0e27b7808dc667f3015be0b6888f6d680e222c8 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:12:02 +0000 Subject: [PATCH 0971/1165] CacheFiles: Better showing of debugging information in active object problems Show more debugging information if cachefiles_mark_object_active() is asked to activate an active object. This may happen, for instance, if the netfs tries to register an object with the same key multiple times. The code is changed to (a) get the appropriate object lock to protect the cookie pointer whilst we dereference it, and (b) get and display the cookie key if available. Signed-off-by: David Howells --- fs/cachefiles/namei.c | 102 +++++++++++++++++++++++++++++++----------- 1 file changed, 75 insertions(+), 27 deletions(-) diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index 3df86952ca6..00a0cda8f47 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -27,6 +27,76 @@ static int cachefiles_wait_bit(void *flags) return 0; } +#define CACHEFILES_KEYBUF_SIZE 512 + +/* + * dump debugging info about an object + */ +static noinline +void __cachefiles_printk_object(struct cachefiles_object *object, + const char *prefix, + u8 *keybuf) +{ + struct fscache_cookie *cookie; + unsigned keylen, loop; + + printk(KERN_ERR "%sobject: OBJ%x\n", + prefix, object->fscache.debug_id); + printk(KERN_ERR "%sobjstate=%s fl=%lx swfl=%lx ev=%lx[%lx]\n", + prefix, fscache_object_states[object->fscache.state], + object->fscache.flags, object->fscache.work.flags, + object->fscache.events, + object->fscache.event_mask & FSCACHE_OBJECT_EVENTS_MASK); + printk(KERN_ERR "%sops=%u inp=%u exc=%u\n", + prefix, object->fscache.n_ops, object->fscache.n_in_progress, + object->fscache.n_exclusive); + printk(KERN_ERR "%sparent=%p\n", + prefix, object->fscache.parent); + + spin_lock(&object->fscache.lock); + cookie = object->fscache.cookie; + if (cookie) { + printk(KERN_ERR "%scookie=%p [pr=%p nd=%p fl=%lx]\n", + prefix, + object->fscache.cookie, + object->fscache.cookie->parent, + object->fscache.cookie->netfs_data, + object->fscache.cookie->flags); + if (keybuf) + keylen = cookie->def->get_key(cookie->netfs_data, keybuf, + CACHEFILES_KEYBUF_SIZE); + else + keylen = 0; + } else { + printk(KERN_ERR "%scookie=NULL\n", prefix); + keylen = 0; + } + spin_unlock(&object->fscache.lock); + + if (keylen) { + printk(KERN_ERR "%skey=[%u] '", prefix, keylen); + for (loop = 0; loop < keylen; loop++) + printk("%02x", keybuf[loop]); + printk("'\n"); + } +} + +/* + * dump debugging info about a pair of objects + */ +static noinline void cachefiles_printk_object(struct cachefiles_object *object, + struct cachefiles_object *xobject) +{ + u8 *keybuf; + + keybuf = kmalloc(CACHEFILES_KEYBUF_SIZE, GFP_NOIO); + if (object) + __cachefiles_printk_object(object, "", keybuf); + if (xobject) + __cachefiles_printk_object(xobject, "x", keybuf); + kfree(keybuf); +} + /* * record the fact that an object is now active */ @@ -42,8 +112,11 @@ static void cachefiles_mark_object_active(struct cachefiles_cache *cache, try_again: write_lock(&cache->active_lock); - if (test_and_set_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags)) + if (test_and_set_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags)) { + printk(KERN_ERR "CacheFiles: Error: Object already active\n"); + cachefiles_printk_object(object, NULL); BUG(); + } dentry = object->dentry; _p = &cache->active_nodes.rb_node; @@ -76,32 +149,7 @@ wait_for_old_object: printk(KERN_ERR "\n"); printk(KERN_ERR "CacheFiles: Error:" " Unexpected object collision\n"); - printk(KERN_ERR "xobject: OBJ%x\n", - xobject->fscache.debug_id); - printk(KERN_ERR "xobjstate=%s\n", - fscache_object_states[xobject->fscache.state]); - printk(KERN_ERR "xobjflags=%lx\n", xobject->fscache.flags); - printk(KERN_ERR "xobjevent=%lx [%lx]\n", - xobject->fscache.events, xobject->fscache.event_mask); - printk(KERN_ERR "xops=%u inp=%u exc=%u\n", - xobject->fscache.n_ops, xobject->fscache.n_in_progress, - xobject->fscache.n_exclusive); - printk(KERN_ERR "xcookie=%p [pr=%p nd=%p fl=%lx]\n", - xobject->fscache.cookie, - xobject->fscache.cookie->parent, - xobject->fscache.cookie->netfs_data, - xobject->fscache.cookie->flags); - printk(KERN_ERR "xparent=%p\n", - xobject->fscache.parent); - printk(KERN_ERR "object: OBJ%x\n", - object->fscache.debug_id); - printk(KERN_ERR "cookie=%p [pr=%p nd=%p fl=%lx]\n", - object->fscache.cookie, - object->fscache.cookie->parent, - object->fscache.cookie->netfs_data, - object->fscache.cookie->flags); - printk(KERN_ERR "parent=%p\n", - object->fscache.parent); + cachefiles_printk_object(object, xobject); BUG(); } atomic_inc(&xobject->usage); -- GitLab From fee096deb4f33897937b974cb2c5168bab7935be Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:12:05 +0000 Subject: [PATCH 0972/1165] CacheFiles: Catch an overly long wait for an old active object Catch an overly long wait for an old, dying active object when we want to replace it with a new one. The probability is that all the slow-work threads are hogged, and the delete can't get a look in. What we do instead is: (1) if there's nothing in the slow work queue, we sleep until either the dying object has finished dying or there is something in the slow work queue behind which we can queue our object. (2) if there is something in the slow work queue, we return ETIMEDOUT to fscache_lookup_object(), which then puts us back on the slow work queue, presumably behind the deletion that we're blocked by. We are then deferred for a while until we work our way back through the queue - without blocking a slow-work thread unnecessarily. A backtrace similar to the following may appear in the log without this patch: INFO: task kslowd004:5711 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kslowd004 D 0000000000000000 0 5711 2 0x00000080 ffff88000340bb80 0000000000000046 ffff88002550d000 0000000000000000 ffff88002550d000 0000000000000007 ffff88000340bfd8 ffff88002550d2a8 000000000000ddf0 00000000000118c0 00000000000118c0 ffff88002550d2a8 Call Trace: [] ? trace_hardirqs_on+0xd/0xf [] ? cachefiles_wait_bit+0x0/0xd [cachefiles] [] cachefiles_wait_bit+0x9/0xd [cachefiles] [] __wait_on_bit+0x43/0x76 [] ? ext3_xattr_get+0x1ec/0x270 [] out_of_line_wait_on_bit+0x69/0x74 [] ? cachefiles_wait_bit+0x0/0xd [cachefiles] [] ? wake_bit_function+0x0/0x2e [] cachefiles_mark_object_active+0x203/0x23b [cachefiles] [] cachefiles_walk_to_object+0x558/0x827 [cachefiles] [] cachefiles_lookup_object+0xac/0x12a [cachefiles] [] fscache_lookup_object+0x1c7/0x214 [fscache] [] fscache_object_state_machine+0xa5/0x52d [fscache] [] fscache_object_slow_work_execute+0x5f/0xa0 [fscache] [] slow_work_execute+0x18f/0x2d1 [] slow_work_thread+0x1c5/0x308 [] ? autoremove_wake_function+0x0/0x34 [] ? slow_work_thread+0x0/0x308 [] kthread+0x7a/0x82 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x82 [] ? child_rip+0x0/0x20 1 lock held by kslowd004/5711: #0: (&sb->s_type->i_mutex_key#7/1){+.+.+.}, at: [] cachefiles_walk_to_object+0x1b3/0x827 [cachefiles] Signed-off-by: David Howells --- Documentation/filesystems/caching/fscache.txt | 1 + fs/cachefiles/interface.c | 6 +- fs/cachefiles/namei.c | 87 +++++++++++++++---- fs/fscache/internal.h | 1 + fs/fscache/object.c | 10 ++- fs/fscache/stats.c | 4 +- include/linux/fscache-cache.h | 6 +- 7 files changed, 90 insertions(+), 25 deletions(-) diff --git a/Documentation/filesystems/caching/fscache.txt b/Documentation/filesystems/caching/fscache.txt index 3c23411956b..a91e2e2095b 100644 --- a/Documentation/filesystems/caching/fscache.txt +++ b/Documentation/filesystems/caching/fscache.txt @@ -235,6 +235,7 @@ proc files. neg=N Number of negative lookups made pos=N Number of positive lookups made crt=N Number of objects created by lookup + tmo=N Number of lookups timed out and requeued Updates n=N Number of update cookie requests seen nul=N Number of upd reqs given a NULL parent run=N Number of upd reqs granted CPU time diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c index 8e67abf0598..9d3c426044a 100644 --- a/fs/cachefiles/interface.c +++ b/fs/cachefiles/interface.c @@ -114,8 +114,9 @@ nomem_lookup_data: /* * attempt to look up the nominated node in this cache + * - return -ETIMEDOUT to be scheduled again */ -static void cachefiles_lookup_object(struct fscache_object *_object) +static int cachefiles_lookup_object(struct fscache_object *_object) { struct cachefiles_lookup_data *lookup_data; struct cachefiles_object *parent, *object; @@ -145,13 +146,14 @@ static void cachefiles_lookup_object(struct fscache_object *_object) object->fscache.cookie->def->type != FSCACHE_COOKIE_TYPE_INDEX) cachefiles_attr_changed(&object->fscache); - if (ret < 0) { + if (ret < 0 && ret != -ETIMEDOUT) { printk(KERN_WARNING "CacheFiles: Lookup failed error %d\n", ret); fscache_object_lookup_error(&object->fscache); } _leave(" [%d]", ret); + return ret; } /* diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index 00a0cda8f47..14ac4806e29 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -21,12 +21,6 @@ #include #include "internal.h" -static int cachefiles_wait_bit(void *flags) -{ - schedule(); - return 0; -} - #define CACHEFILES_KEYBUF_SIZE 512 /* @@ -100,8 +94,8 @@ static noinline void cachefiles_printk_object(struct cachefiles_object *object, /* * record the fact that an object is now active */ -static void cachefiles_mark_object_active(struct cachefiles_cache *cache, - struct cachefiles_object *object) +static int cachefiles_mark_object_active(struct cachefiles_cache *cache, + struct cachefiles_object *object) { struct cachefiles_object *xobject; struct rb_node **_p, *_parent = NULL; @@ -139,8 +133,8 @@ try_again: rb_insert_color(&object->active_node, &cache->active_nodes); write_unlock(&cache->active_lock); - _leave(""); - return; + _leave(" = 0"); + return 0; /* an old object from a previous incarnation is hogging the slot - we * need to wait for it to be destroyed */ @@ -155,13 +149,64 @@ wait_for_old_object: atomic_inc(&xobject->usage); write_unlock(&cache->active_lock); - _debug(">>> wait"); - wait_on_bit(&xobject->flags, CACHEFILES_OBJECT_ACTIVE, - cachefiles_wait_bit, TASK_UNINTERRUPTIBLE); - _debug("<<< waited"); + if (test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags)) { + wait_queue_head_t *wq; + + signed long timeout = 60 * HZ; + wait_queue_t wait; + bool requeue; + + /* if the object we're waiting for is queued for processing, + * then just put ourselves on the queue behind it */ + if (slow_work_is_queued(&xobject->fscache.work)) { + _debug("queue OBJ%x behind OBJ%x immediately", + object->fscache.debug_id, + xobject->fscache.debug_id); + goto requeue; + } + + /* otherwise we sleep until either the object we're waiting for + * is done, or the slow-work facility wants the thread back to + * do other work */ + wq = bit_waitqueue(&xobject->flags, CACHEFILES_OBJECT_ACTIVE); + init_wait(&wait); + requeue = false; + do { + prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE); + if (!test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags)) + break; + requeue = slow_work_sleep_till_thread_needed( + &object->fscache.work, &timeout); + } while (timeout > 0 && !requeue); + finish_wait(wq, &wait); + + if (requeue && + test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags)) { + _debug("queue OBJ%x behind OBJ%x after wait", + object->fscache.debug_id, + xobject->fscache.debug_id); + goto requeue; + } + + if (timeout <= 0) { + printk(KERN_ERR "\n"); + printk(KERN_ERR "CacheFiles: Error: Overlong" + " wait for old active object to go away\n"); + cachefiles_printk_object(object, xobject); + goto requeue; + } + } + + ASSERT(!test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags)); cache->cache.ops->put_object(&xobject->fscache); goto try_again; + +requeue: + clear_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags); + cache->cache.ops->put_object(&xobject->fscache); + _leave(" = -ETIMEDOUT"); + return -ETIMEDOUT; } /* @@ -466,12 +511,15 @@ lookup_again: } /* note that we're now using this object */ - cachefiles_mark_object_active(cache, object); + ret = cachefiles_mark_object_active(cache, object); mutex_unlock(&dir->d_inode->i_mutex); dput(dir); dir = NULL; + if (ret == -ETIMEDOUT) + goto mark_active_timed_out; + _debug("=== OBTAINED_OBJECT ==="); if (object->new) { @@ -515,6 +563,10 @@ create_error: cachefiles_io_error(cache, "Create/mkdir failed"); goto error; +mark_active_timed_out: + _debug("mark active timed out"); + goto release_dentry; + check_error: _debug("check error %d", ret); write_lock(&cache->active_lock); @@ -522,7 +574,7 @@ check_error: clear_bit(CACHEFILES_OBJECT_ACTIVE, &object->flags); wake_up_bit(&object->flags, CACHEFILES_OBJECT_ACTIVE); write_unlock(&cache->active_lock); - +release_dentry: dput(object->dentry); object->dentry = NULL; goto error_out; @@ -543,9 +595,6 @@ error: error_out2: dput(dir); error_out: - if (ret == -ENOSPC) - ret = -ENOBUFS; - _leave(" = error %d", -ret); return ret; } diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index 5b49a373689..0ca2566e038 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -215,6 +215,7 @@ extern atomic_t fscache_n_object_no_alloc; extern atomic_t fscache_n_object_lookups; extern atomic_t fscache_n_object_lookups_negative; extern atomic_t fscache_n_object_lookups_positive; +extern atomic_t fscache_n_object_lookups_timed_out; extern atomic_t fscache_n_object_created; extern atomic_t fscache_n_object_avail; extern atomic_t fscache_n_object_dead; diff --git a/fs/fscache/object.c b/fs/fscache/object.c index f3f952cf887..e513ac599c8 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -468,6 +468,7 @@ static void fscache_lookup_object(struct fscache_object *object) { struct fscache_cookie *cookie = object->cookie; struct fscache_object *parent; + int ret; _enter(""); @@ -493,12 +494,19 @@ static void fscache_lookup_object(struct fscache_object *object) fscache_stat(&fscache_n_object_lookups); fscache_stat(&fscache_n_cop_lookup_object); - object->cache->ops->lookup_object(object); + ret = object->cache->ops->lookup_object(object); fscache_stat_d(&fscache_n_cop_lookup_object); if (test_bit(FSCACHE_OBJECT_EV_ERROR, &object->events)) set_bit(FSCACHE_COOKIE_UNAVAILABLE, &cookie->flags); + if (ret == -ETIMEDOUT) { + /* probably stuck behind another object, so move this one to + * the back of the queue */ + fscache_stat(&fscache_n_object_lookups_timed_out); + set_bit(FSCACHE_OBJECT_EV_REQUEUE, &object->events); + } + _leave(""); } diff --git a/fs/fscache/stats.c b/fs/fscache/stats.c index 05f77caf4a2..46435f3aae6 100644 --- a/fs/fscache/stats.c +++ b/fs/fscache/stats.c @@ -98,6 +98,7 @@ atomic_t fscache_n_object_no_alloc; atomic_t fscache_n_object_lookups; atomic_t fscache_n_object_lookups_negative; atomic_t fscache_n_object_lookups_positive; +atomic_t fscache_n_object_lookups_timed_out; atomic_t fscache_n_object_created; atomic_t fscache_n_object_avail; atomic_t fscache_n_object_dead; @@ -160,10 +161,11 @@ static int fscache_stats_show(struct seq_file *m, void *v) atomic_read(&fscache_n_acquires_nobufs), atomic_read(&fscache_n_acquires_oom)); - seq_printf(m, "Lookups: n=%u neg=%u pos=%u crt=%u\n", + seq_printf(m, "Lookups: n=%u neg=%u pos=%u crt=%u tmo=%u\n", atomic_read(&fscache_n_object_lookups), atomic_read(&fscache_n_object_lookups_negative), atomic_read(&fscache_n_object_lookups_positive), + atomic_read(&fscache_n_object_lookups_timed_out), atomic_read(&fscache_n_object_created)); seq_printf(m, "Updates: n=%u nul=%u run=%u\n", diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 5db50002f3b..7be0c6fbe88 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -234,8 +234,10 @@ struct fscache_cache_ops { struct fscache_object *(*alloc_object)(struct fscache_cache *cache, struct fscache_cookie *cookie); - /* look up the object for a cookie */ - void (*lookup_object)(struct fscache_object *object); + /* look up the object for a cookie + * - return -ETIMEDOUT to be requeued + */ + int (*lookup_object)(struct fscache_object *object); /* finished looking up */ void (*lookup_complete)(struct fscache_object *object); -- GitLab From 14e69647c868459bcb910f771851ca7c699efd21 Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 19 Nov 2009 18:12:08 +0000 Subject: [PATCH 0973/1165] CacheFiles: Don't log lookup/create failing with ENOBUFS Don't log the CacheFiles lookup/create object routined failing with ENOBUFS as under high memory load or high cache load they can do this quite a lot. This error simply means that the requested object cannot be created on disk due to lack of space, or due to failure of the backing filesystem to find sufficient resources. Signed-off-by: David Howells --- fs/cachefiles/interface.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/cachefiles/interface.c b/fs/cachefiles/interface.c index 9d3c426044a..27089311fbe 100644 --- a/fs/cachefiles/interface.c +++ b/fs/cachefiles/interface.c @@ -147,8 +147,9 @@ static int cachefiles_lookup_object(struct fscache_object *_object) cachefiles_attr_changed(&object->fscache); if (ret < 0 && ret != -ETIMEDOUT) { - printk(KERN_WARNING "CacheFiles: Lookup failed error %d\n", - ret); + if (ret != -ENOBUFS) + printk(KERN_WARNING + "CacheFiles: Lookup failed error %d\n", ret); fscache_object_lookup_error(&object->fscache); } -- GitLab From 56cf54831fd1be105e89a9df899e3b22442da180 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 19 Nov 2009 01:28:10 +0000 Subject: [PATCH 0974/1165] ieee802154: dont leak skbs in ieee802154_fake_xmit() ieee802154_fake_xmit() should free skbs since it returns NETDEV_TX_OK Signed-off-by: Eric Dumazet Acked-by: Dmitry Eremin-Solenikov Signed-off-by: David S. Miller --- drivers/ieee802154/fakehard.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/ieee802154/fakehard.c b/drivers/ieee802154/fakehard.c index 96a2959ce87..7c544f7c74c 100644 --- a/drivers/ieee802154/fakehard.c +++ b/drivers/ieee802154/fakehard.c @@ -260,15 +260,12 @@ static int ieee802154_fake_close(struct net_device *dev) static netdev_tx_t ieee802154_fake_xmit(struct sk_buff *skb, struct net_device *dev) { - skb->iif = dev->ifindex; - skb->dev = dev; dev->stats.tx_packets++; dev->stats.tx_bytes += skb->len; - dev->trans_start = jiffies; - /* FIXME: do hardware work here ... */ + dev_kfree_skb(skb); return NETDEV_TX_OK; } -- GitLab From 2b1c8b0f925c3f5943cf95d263d72927baae88e7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 18 Nov 2009 07:09:39 +0000 Subject: [PATCH 0975/1165] veth: Fix veth_get_stats() veth_get_stats() can be called in parallel on several cpus. It's better to not reset dev->stats as it could give wrong result on one cpu. Use temporary variables, then store the final results. Also, we should loop on every possible cpus, not only online cpus, or cpu hotplug can suddenly give wrong veth stats. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/veth.c | 35 ++++++++++++++++------------------- 1 file changed, 16 insertions(+), 19 deletions(-) diff --git a/drivers/net/veth.c b/drivers/net/veth.c index ade5b344f75..52af5017c46 100644 --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -210,32 +210,29 @@ rx_drop: static struct net_device_stats *veth_get_stats(struct net_device *dev) { struct veth_priv *priv; - struct net_device_stats *dev_stats; int cpu; - struct veth_net_stats *stats; + struct veth_net_stats *stats, total = {0}; priv = netdev_priv(dev); - dev_stats = &dev->stats; - - dev_stats->rx_packets = 0; - dev_stats->tx_packets = 0; - dev_stats->rx_bytes = 0; - dev_stats->tx_bytes = 0; - dev_stats->tx_dropped = 0; - dev_stats->rx_dropped = 0; - for_each_online_cpu(cpu) { + for_each_possible_cpu(cpu) { stats = per_cpu_ptr(priv->stats, cpu); - dev_stats->rx_packets += stats->rx_packets; - dev_stats->tx_packets += stats->tx_packets; - dev_stats->rx_bytes += stats->rx_bytes; - dev_stats->tx_bytes += stats->tx_bytes; - dev_stats->tx_dropped += stats->tx_dropped; - dev_stats->rx_dropped += stats->rx_dropped; + total.rx_packets += stats->rx_packets; + total.tx_packets += stats->tx_packets; + total.rx_bytes += stats->rx_bytes; + total.tx_bytes += stats->tx_bytes; + total.tx_dropped += stats->tx_dropped; + total.rx_dropped += stats->rx_dropped; } - - return dev_stats; + dev->stats.rx_packets = total.rx_packets; + dev->stats.tx_packets = total.tx_packets; + dev->stats.rx_bytes = total.rx_bytes; + dev->stats.tx_bytes = total.tx_bytes; + dev->stats.tx_dropped = total.tx_dropped; + dev->stats.rx_dropped = total.rx_dropped; + + return &dev->stats; } static int veth_open(struct net_device *dev) -- GitLab From d667b9cfd09a2ca61f74a9edc73d08d2ad0d14da Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 19 Nov 2009 04:59:03 +0000 Subject: [PATCH 0976/1165] netfilter: xt_osf: fix xt_osf_remove_callback() return value Return a negative error value. Signed-off-by: Roel Kluin Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/xt_osf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_osf.c b/net/netfilter/xt_osf.c index 63e19050465..4d1a41bbd5d 100644 --- a/net/netfilter/xt_osf.c +++ b/net/netfilter/xt_osf.c @@ -118,7 +118,7 @@ static int xt_osf_remove_callback(struct sock *ctnl, struct sk_buff *skb, { struct xt_osf_user_finger *f; struct xt_osf_finger *sf; - int err = ENOENT; + int err = -ENOENT; if (!osf_attrs[OSF_ATTR_FINGER]) return -EINVAL; -- GitLab From 6440fe059ee8b49b548c8c2c1447530075d07e10 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 19 Nov 2009 04:59:05 +0000 Subject: [PATCH 0977/1165] netfilter: nf_log: fix sleeping function called from invalid context in seq_show() [ 171.925285] BUG: sleeping function called from invalid context at kernel/mutex.c:280 [ 171.925296] in_atomic(): 1, irqs_disabled(): 0, pid: 671, name: grep [ 171.925306] 2 locks held by grep/671: [ 171.925312] #0: (&p->lock){+.+.+.}, at: [] seq_read+0x25/0x36c [ 171.925340] #1: (rcu_read_lock){.+.+..}, at: [] seq_start+0x0/0x44 [ 171.925372] Pid: 671, comm: grep Not tainted 2.6.31.6-4-netbook #3 [ 171.925380] Call Trace: [ 171.925398] [] ? __debug_show_held_locks+0x1e/0x20 [ 171.925414] [] __might_sleep+0xfb/0x102 [ 171.925430] [] mutex_lock_nested+0x1c/0x2ad [ 171.925444] [] seq_show+0x74/0x127 [ 171.925456] [] seq_read+0x1b4/0x36c [ 171.925469] [] ? seq_read+0x0/0x36c [ 171.925483] [] proc_reg_read+0x60/0x74 [ 171.925496] [] ? proc_reg_read+0x0/0x74 [ 171.925510] [] vfs_read+0x87/0x110 [ 171.925523] [] sys_read+0x3b/0x60 [ 171.925538] [] syscall_call+0x7/0xb Fix it by replacing RCU with nf_log_mutex. Reported-by: "Yin, Kangkai" Signed-off-by: Wu Fengguang Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- net/netfilter/nf_log.c | 18 +++++------------- 1 file changed, 5 insertions(+), 13 deletions(-) diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index c93494fef8e..d65d3481919 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -128,9 +128,8 @@ EXPORT_SYMBOL(nf_log_packet); #ifdef CONFIG_PROC_FS static void *seq_start(struct seq_file *seq, loff_t *pos) - __acquires(RCU) { - rcu_read_lock(); + mutex_lock(&nf_log_mutex); if (*pos >= ARRAY_SIZE(nf_loggers)) return NULL; @@ -149,9 +148,8 @@ static void *seq_next(struct seq_file *s, void *v, loff_t *pos) } static void seq_stop(struct seq_file *s, void *v) - __releases(RCU) { - rcu_read_unlock(); + mutex_unlock(&nf_log_mutex); } static int seq_show(struct seq_file *s, void *v) @@ -161,7 +159,7 @@ static int seq_show(struct seq_file *s, void *v) struct nf_logger *t; int ret; - logger = rcu_dereference(nf_loggers[*pos]); + logger = nf_loggers[*pos]; if (!logger) ret = seq_printf(s, "%2lld NONE (", *pos); @@ -171,22 +169,16 @@ static int seq_show(struct seq_file *s, void *v) if (ret < 0) return ret; - mutex_lock(&nf_log_mutex); list_for_each_entry(t, &nf_loggers_l[*pos], list[*pos]) { ret = seq_printf(s, "%s", t->name); - if (ret < 0) { - mutex_unlock(&nf_log_mutex); + if (ret < 0) return ret; - } if (&t->list[*pos] != nf_loggers_l[*pos].prev) { ret = seq_printf(s, ","); - if (ret < 0) { - mutex_unlock(&nf_log_mutex); + if (ret < 0) return ret; - } } } - mutex_unlock(&nf_log_mutex); return seq_printf(s, ")\n"); } -- GitLab From 5854d9c8d18359b1fc2f23c0ef2d51dd53281bd6 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 19 Nov 2009 02:18:44 +0000 Subject: [PATCH 0978/1165] Fix handling of the HP/Acer 'DMAR at zero' BIOS error for machines with <4GiB RAM. Commit 86cf898e1d0fca245173980e3897580db38569a8 ("intel-iommu: Check for 'DMAR at zero' BIOS error earlier.") was supposed to work by pretending not to detect an IOMMU if it was actually being reported by the BIOS at physical address zero. However, the intel_iommu_init() function is called unconditionally, as are the corresponding functions for other IOMMU hardware. So the patch only worked if you have RAM above the 4GiB boundary. It caused swiotlb to be initialised when no IOMMU was detected during early boot, and thus the later IOMMU init would refuse to run. But if you have less RAM than that, swiotlb wouldn't get set up and the IOMMU _would_ still end up being initialised, even though we never claimed to detect it. This patch also sets the dmar_disabled flag when the error is detected during the initial detection phase -- so that the later call to intel_iommu_init() will return without doing anything, regardless of whether swiotlb is used or not. Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/pci/dmar.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index e5f8fc164fd..b952ebc7a78 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -609,6 +609,9 @@ int __init check_zero_address(void) dmi_get_system_info(DMI_BIOS_VENDOR), dmi_get_system_info(DMI_BIOS_VERSION), dmi_get_system_info(DMI_PRODUCT_VERSION)); +#ifdef CONFIG_DMAR + dmar_disabled = 1; +#endif return 0; } break; -- GitLab From 308efab5e231d1510cd35931d87629bf5171caae Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 19 Nov 2009 13:30:36 +0000 Subject: [PATCH 0979/1165] vt: Fix use of "new" in a struct field As this struct is exposed to user space and the API was added for this release it's a bit of a pain for the C++ world and we still have time to fix it. Rename the fields before we end up with that pain in an actual release. Signed-off-by: Alan Cox Reported-by: Olivier Goffart Signed-off-by: Linus Torvalds --- drivers/char/vt_ioctl.c | 6 +++--- include/linux/vt.h | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index ed86d3bf249..6aa10284104 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -103,8 +103,8 @@ void vt_event_post(unsigned int event, unsigned int old, unsigned int new) ve->event.event = event; /* kernel view is consoles 0..n-1, user space view is console 1..n with 0 meaning current, so we must bias */ - ve->event.old = old + 1; - ve->event.new = new + 1; + ve->event.oldev = old + 1; + ve->event.newev = new + 1; wake = 1; ve->done = 1; } @@ -186,7 +186,7 @@ int vt_waitactive(int n) vt_event_wait(&vw); if (vw.done == 0) return -EINTR; - } while (vw.event.new != n); + } while (vw.event.newev != n); return 0; } diff --git a/include/linux/vt.h b/include/linux/vt.h index 7afca0d7213..7ffa11f0623 100644 --- a/include/linux/vt.h +++ b/include/linux/vt.h @@ -70,8 +70,8 @@ struct vt_event { #define VT_EVENT_UNBLANK 0x0004 /* Screen unblank */ #define VT_EVENT_RESIZE 0x0008 /* Resize display */ #define VT_MAX_EVENT 0x000F - unsigned int old; /* Old console */ - unsigned int new; /* New console (if changing) */ + unsigned int oldev; /* Old console */ + unsigned int newev; /* New console (if changing) */ unsigned int pad[4]; /* Padding for expansion */ }; -- GitLab From 648f4e3e50c4793d9dbf9a09afa193631f76fa26 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 19 Nov 2009 14:32:38 -0800 Subject: [PATCH 0980/1165] Linux 2.6.32-rc8 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index aa3e13a7e35..ad8260102f6 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 32 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- GitLab From a0a74d1ee2e38eb936a0437330da3a2fbc12b54e Mon Sep 17 00:00:00 2001 From: Jiang Yutang Date: Fri, 16 Oct 2009 20:44:36 +0400 Subject: [PATCH 0981/1165] sata_fsl: Split hard and soft reset Split sata_fsl_softreset() into hard and soft resets to make error-handling more efficient & device and PMP detection more reliable. Also includes fix for PMP support, driver tested with Sil3726, Sil4726 & Exar PMP controllers. [AV: Also fixes resuming from deep sleep on MPC8315 CPUs] Signed-off-by: Jiang Yutang Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/ata/sata_fsl.c | 84 ++++++++++++++++++++++-------------------- 1 file changed, 44 insertions(+), 40 deletions(-) diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index d344db42a00..172b57e6543 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -707,34 +707,17 @@ static unsigned int sata_fsl_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } -static int sata_fsl_prereset(struct ata_link *link, unsigned long deadline) -{ - /* FIXME: Never skip softreset, sata_fsl_softreset() is - * combination of soft and hard resets. sata_fsl_softreset() - * needs to be splitted into soft and hard resets. - */ - return 0; -} - -static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, +static int sata_fsl_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { struct ata_port *ap = link->ap; - struct sata_fsl_port_priv *pp = ap->private_data; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; - int pmp = sata_srst_pmp(link); u32 temp; - struct ata_taskfile tf; - u8 *cfis; - u32 Serror; int i = 0; unsigned long start_jiffies; - DPRINTK("in xx_softreset\n"); - - if (pmp != SATA_PMP_CTRL_PORT) - goto issue_srst; + DPRINTK("in xx_hardreset\n"); try_offline_again: /* @@ -749,7 +732,7 @@ try_offline_again: if (temp & ONLINE) { ata_port_printk(ap, KERN_ERR, - "Softreset failed, not off-lined %d\n", i); + "Hardreset failed, not off-lined %d\n", i); /* * Try to offline controller atleast twice @@ -761,7 +744,7 @@ try_offline_again: goto try_offline_again; } - DPRINTK("softreset, controller off-lined\n"); + DPRINTK("hardreset, controller off-lined\n"); VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); @@ -786,11 +769,11 @@ try_offline_again: if (!(temp & ONLINE)) { ata_port_printk(ap, KERN_ERR, - "Softreset failed, not on-lined\n"); + "Hardreset failed, not on-lined\n"); goto err; } - DPRINTK("softreset, controller off-lined & on-lined\n"); + DPRINTK("hardreset, controller off-lined & on-lined\n"); VPRINTK("HStatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); VPRINTK("HControl = 0x%x\n", ioread32(hcr_base + HCONTROL)); @@ -806,7 +789,7 @@ try_offline_again: "No Device OR PHYRDY change,Hstatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); *class = ATA_DEV_NONE; - goto out; + return 0; } /* @@ -819,11 +802,44 @@ try_offline_again: if ((temp & 0xFF) != 0x18) { ata_port_printk(ap, KERN_WARNING, "No Signature Update\n"); *class = ATA_DEV_NONE; - goto out; + goto do_followup_srst; } else { ata_port_printk(ap, KERN_INFO, "Signature Update detected @ %d msecs\n", jiffies_to_msecs(jiffies - start_jiffies)); + *class = sata_fsl_dev_classify(ap); + return 0; + } + +do_followup_srst: + /* + * request libATA to perform follow-up softreset + */ + return -EAGAIN; + +err: + return -EIO; +} + +static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct sata_fsl_port_priv *pp = ap->private_data; + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + int pmp = sata_srst_pmp(link); + u32 temp; + struct ata_taskfile tf; + u8 *cfis; + u32 Serror; + + DPRINTK("in xx_softreset\n"); + + if (ata_link_offline(link)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + return 0; } /* @@ -834,7 +850,6 @@ try_offline_again: * reached here, we can send a command to the target device */ -issue_srst: DPRINTK("Sending SRST/device reset\n"); ata_tf_init(link->device, &tf); @@ -860,6 +875,8 @@ issue_srst: ioread32(CA + hcr_base), ioread32(CC + hcr_base)); iowrite32(0xFFFF, CC + hcr_base); + if (pmp != SATA_PMP_CTRL_PORT) + iowrite32(pmp, CQPMP + hcr_base); iowrite32(1, CQ + hcr_base); temp = ata_wait_register(CQ + hcr_base, 0x1, 0x1, 1, 5000); @@ -926,7 +943,6 @@ issue_srst: VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE)); } -out: return 0; err: @@ -988,18 +1004,6 @@ static void sata_fsl_error_intr(struct ata_port *ap) ehi->err_mask |= AC_ERR_ATA_BUS; ehi->action |= ATA_EH_SOFTRESET; - /* - * Ignore serror in case of fatal errors as we always want - * to do a soft-reset of the FSL SATA controller. Analyzing - * serror may cause libata to schedule a hard-reset action, - * and hard-reset currently does not do controller - * offline/online, causing command timeouts and leads to an - * un-recoverable state, hence make libATA ignore - * autopsy in case of fatal errors. - */ - - ehi->flags |= ATA_EHI_NO_AUTOPSY; - freeze = 1; } @@ -1267,8 +1271,8 @@ static struct ata_port_operations sata_fsl_ops = { .freeze = sata_fsl_freeze, .thaw = sata_fsl_thaw, - .prereset = sata_fsl_prereset, .softreset = sata_fsl_softreset, + .hardreset = sata_fsl_hardreset, .pmp_softreset = sata_fsl_softreset, .error_handler = sata_fsl_error_handler, .post_internal_cmd = sata_fsl_post_internal_cmd, -- GitLab From 228c4f5cfbf1cda411d9aa7204a612a63c89b1e8 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:07:10 -0700 Subject: [PATCH 0982/1165] ioat3: dca and raid operations are incompatible RAID operations cause a system hang on platforms with DCA (Direct-Cache-Access) enabled. So turn off RAID capabilities in this case. Signed-off-by: Dan Williams --- drivers/dma/ioat/dca.c | 2 +- drivers/dma/ioat/dma_v3.c | 6 ++++++ drivers/dma/ioat/hw.h | 2 ++ 3 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/dma/ioat/dca.c b/drivers/dma/ioat/dca.c index 14f0a782df4..abd9038e06b 100644 --- a/drivers/dma/ioat/dca.c +++ b/drivers/dma/ioat/dca.c @@ -103,7 +103,7 @@ static int dca_enabled_in_bios(struct pci_dev *pdev) return res; } -static int system_has_dca_enabled(struct pci_dev *pdev) +int system_has_dca_enabled(struct pci_dev *pdev) { if (boot_cpu_has(X86_FEATURE_DCA)) return dca_enabled_in_bios(pdev); diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 35d1e33afd5..4f305f61f87 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -1117,6 +1117,7 @@ static int __devinit ioat3_dma_self_test(struct ioatdma_device *device) int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) { struct pci_dev *pdev = device->pdev; + int dca_en = system_has_dca_enabled(pdev); struct dma_device *dma; struct dma_chan *c; struct ioat_chan_common *chan; @@ -1137,6 +1138,11 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) dma->device_prep_dma_interrupt = ioat3_prep_interrupt_lock; cap = readl(device->reg_base + IOAT_DMA_CAP_OFFSET); + + /* dca is incompatible with raid operations */ + if (dca_en && (cap & (IOAT_CAP_XOR|IOAT_CAP_PQ))) + cap &= ~(IOAT_CAP_XOR|IOAT_CAP_PQ); + if (cap & IOAT_CAP_XOR) { is_raid_device = true; dma->max_xor = 8; diff --git a/drivers/dma/ioat/hw.h b/drivers/dma/ioat/hw.h index 99afb12bd40..60e675455b6 100644 --- a/drivers/dma/ioat/hw.h +++ b/drivers/dma/ioat/hw.h @@ -39,6 +39,8 @@ #define IOAT_VER_3_0 0x30 /* Version 3.0 */ #define IOAT_VER_3_2 0x32 /* Version 3.2 */ +int system_has_dca_enabled(struct pci_dev *pdev); + struct ioat_dma_descriptor { uint32_t size; union { -- GitLab From 6f82b83b7a56bc6e9dd6d7b93531dde6027c5309 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:07:57 -0700 Subject: [PATCH 0983/1165] ioat2,3: disable asynchronous error notifications Error interrupts and error completions may cause channel hangs, so poll the channel status register after a timeout. Signed-off-by: Dan Williams --- drivers/dma/ioat/registers.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/dma/ioat/registers.h b/drivers/dma/ioat/registers.h index 63038e18ab0..f015ec19670 100644 --- a/drivers/dma/ioat/registers.h +++ b/drivers/dma/ioat/registers.h @@ -92,9 +92,7 @@ #define IOAT_CHANCTRL_ERR_COMPLETION_EN 0x0004 #define IOAT_CHANCTRL_INT_REARM 0x0001 #define IOAT_CHANCTRL_RUN (IOAT_CHANCTRL_INT_REARM |\ - IOAT_CHANCTRL_ERR_COMPLETION_EN |\ - IOAT_CHANCTRL_ANY_ERR_ABORT_EN |\ - IOAT_CHANCTRL_ERR_INT_EN) + IOAT_CHANCTRL_ANY_ERR_ABORT_EN) #define IOAT_DMA_COMP_OFFSET 0x02 /* 16-bit DMA channel compatibility */ #define IOAT_DMA_COMP_V1 0x0001 /* Compatibility with DMA version 1 */ -- GitLab From de581b65f6fe78168affa552c3bd15b8c80ed614 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:08:45 -0700 Subject: [PATCH 0984/1165] ioat3: specify valid address for disabled-Q or disabled-P Although disabled, hardware still checks address validity, so duplicate the known address. Signed-off-by: Dan Williams --- drivers/dma/ioat/dma_v3.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 4f305f61f87..fad2e9fba49 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -736,10 +736,16 @@ ioat3_prep_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src, unsigned int src_cnt, const unsigned char *scf, size_t len, unsigned long flags) { + /* specify valid address for disabled result */ + if (flags & DMA_PREP_PQ_DISABLE_P) + dst[0] = dst[1]; + if (flags & DMA_PREP_PQ_DISABLE_Q) + dst[1] = dst[0]; + /* handle the single source multiply case from the raid6 * recovery path */ - if (unlikely((flags & DMA_PREP_PQ_DISABLE_P) && src_cnt == 1)) { + if ((flags & DMA_PREP_PQ_DISABLE_P) && src_cnt == 1) { dma_addr_t single_source[2]; unsigned char single_source_coef[2]; @@ -761,6 +767,12 @@ ioat3_prep_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src, unsigned int src_cnt, const unsigned char *scf, size_t len, enum sum_check_flags *pqres, unsigned long flags) { + /* specify valid address for disabled result */ + if (flags & DMA_PREP_PQ_DISABLE_P) + pq[0] = pq[1]; + if (flags & DMA_PREP_PQ_DISABLE_Q) + pq[1] = pq[0]; + /* the cleanup routine only sets bits on validate failure, it * does not clear bits on validate success... so clear it here */ @@ -778,9 +790,9 @@ ioat3_prep_pqxor(struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src, dma_addr_t pq[2]; memset(scf, 0, src_cnt); - flags |= DMA_PREP_PQ_DISABLE_Q; pq[0] = dst; - pq[1] = ~0; + flags |= DMA_PREP_PQ_DISABLE_Q; + pq[1] = dst; /* specify valid address for disabled result */ return __ioat3_prep_pq_lock(chan, NULL, pq, src, src_cnt, scf, len, flags); @@ -800,9 +812,9 @@ ioat3_prep_pqxor_val(struct dma_chan *chan, dma_addr_t *src, *result = 0; memset(scf, 0, src_cnt); - flags |= DMA_PREP_PQ_DISABLE_Q; pq[0] = src[0]; - pq[1] = ~0; + flags |= DMA_PREP_PQ_DISABLE_Q; + pq[1] = pq[0]; /* specify valid address for disabled result */ return __ioat3_prep_pq_lock(chan, result, pq, &src[1], src_cnt - 1, scf, len, flags); -- GitLab From b2f125bcf5eac41a6d74f75ac573b77753213b74 Mon Sep 17 00:00:00 2001 From: Kevin Wells Date: Thu, 12 Nov 2009 00:28:13 +0100 Subject: [PATCH 0985/1165] i2c: i2c-pnx: Limit minimum jiffie timeout to 2 Limit minimum jiffie timeout to 2 to prevent early timeout on systems with low tick rates Signed-off-by: Kevin Wells Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-pnx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 6ff6c20f1e7..68c8233b6df 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -54,6 +54,9 @@ static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap) struct timer_list *timer = &data->mif.timer; int expires = I2C_PNX_TIMEOUT / (1000 / HZ); + if (expires <= 1) + expires = 2; + del_timer_sync(timer); dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n", -- GitLab From 4ced24c8973f79113444d1e00ee8bd9e74fbf43e Mon Sep 17 00:00:00 2001 From: Kevin Wells Date: Thu, 12 Nov 2009 00:23:00 +0100 Subject: [PATCH 0986/1165] i2c: i2c-pnx: Made buf type unsigned to prevent sign extension Made buf type unsigned to prevent sign extension Signed-off-by: Kevin Wells Signed-off-by: Ben Dooks --- include/linux/i2c-pnx.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h index f13255e0640..9eb07bbc652 100644 --- a/include/linux/i2c-pnx.h +++ b/include/linux/i2c-pnx.h @@ -21,7 +21,7 @@ struct i2c_pnx_mif { int mode; /* Interface mode */ struct completion complete; /* I/O completion */ struct timer_list timer; /* Timeout */ - char * buf; /* Data buffer */ + u8 * buf; /* Data buffer */ int len; /* Length of data buffer */ }; -- GitLab From a7d73d8c686d919cc18dec63e5e194f0e5a7206e Mon Sep 17 00:00:00 2001 From: Kevin Wells Date: Thu, 12 Nov 2009 00:25:52 +0100 Subject: [PATCH 0987/1165] i2c: i2c-pnx: Added missing mach/i2c.h and linux/io.h header file includes Added missing mach/i2c.h and linux/io.h header file includes Signed-off-by: Kevin Wells Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-pnx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 68c8233b6df..1fca5907794 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -19,7 +19,9 @@ #include #include #include +#include #include +#include #include #include -- GitLab From b57014def9afc2bd8a62299d2f51b77dad5ae0c7 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:10:07 -0700 Subject: [PATCH 0988/1165] ioat2,3: report all uncorrectable errors Modify is_ioat_bug() to catch all errors that are uncorrectable, or not currently handled. Signed-off-by: Dan Williams --- drivers/dma/ioat/dma.h | 4 +--- drivers/dma/ioat/dma_v2.c | 2 ++ drivers/dma/ioat/dma_v3.c | 2 ++ 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h index c14fdfeb7f3..45edde99648 100644 --- a/drivers/dma/ioat/dma.h +++ b/drivers/dma/ioat/dma.h @@ -297,9 +297,7 @@ static inline bool is_ioat_suspended(unsigned long status) /* channel was fatally programmed */ static inline bool is_ioat_bug(unsigned long err) { - return !!(err & (IOAT_CHANERR_SRC_ADDR_ERR|IOAT_CHANERR_DEST_ADDR_ERR| - IOAT_CHANERR_NEXT_ADDR_ERR|IOAT_CHANERR_CONTROL_ERR| - IOAT_CHANERR_LENGTH_ERR)); + return !!err; } static inline void ioat_unmap(struct pci_dev *pdev, dma_addr_t addr, size_t len, diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index 96ffab7d37a..8f1f7f05dea 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -279,6 +279,8 @@ void ioat2_timer_event(unsigned long data) u32 chanerr; chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + dev_err(to_dev(chan), "%s: Channel halted (%x)\n", + __func__, chanerr); BUG_ON(is_ioat_bug(chanerr)); } diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index fad2e9fba49..252cf2d3f1d 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -378,6 +378,8 @@ static void ioat3_timer_event(unsigned long data) u32 chanerr; chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET); + dev_err(to_dev(chan), "%s: Channel halted (%x)\n", + __func__, chanerr); BUG_ON(is_ioat_bug(chanerr)); } -- GitLab From 4499a24dec00e037da7d09caccad45e7594a9c19 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:10:25 -0700 Subject: [PATCH 0989/1165] dmaengine: include xor/pq validate in device_has_all_tx_types() A channel must include these capabilities to satisfy ASYNC_TX_DISABLE_CHANNEL_SWITCH. Signed-off-by: Dan Williams --- drivers/dma/dmaengine.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index bd0b248de2c..b6442f09d0f 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -632,11 +632,15 @@ static bool device_has_all_tx_types(struct dma_device *device) #if defined(CONFIG_ASYNC_XOR) || defined(CONFIG_ASYNC_XOR_MODULE) if (!dma_has_cap(DMA_XOR, device->cap_mask)) return false; + if (!dma_has_cap(DMA_XOR_VAL, device->cap_mask)) + return false; #endif #if defined(CONFIG_ASYNC_PQ) || defined(CONFIG_ASYNC_PQ_MODULE) if (!dma_has_cap(DMA_PQ, device->cap_mask)) return false; + if (!dma_has_cap(DMA_PQ_VAL, device->cap_mask)) + return false; #endif return true; -- GitLab From 7b3cc2b1fc2066391e498f3387204908c4eced21 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:10:37 -0700 Subject: [PATCH 0990/1165] async_tx: build-time toggling of async_{syndrome,xor}_val dma support ioat3.2 does not support asynchronous error notifications which makes the driver experience latencies when non-zero pq validate results are expected. Provide a mechanism for turning off async_xor_val and async_syndrome_val via Kconfig. This approach is generally useful for any driver that specifies ASYNC_TX_DISABLE_CHANNEL_SWITCH and would like to force the async_tx api to fall back to the synchronous path for certain operations. Signed-off-by: Dan Williams --- crypto/async_tx/Kconfig | 5 +++++ crypto/async_tx/async_pq.c | 14 +++++++++++--- crypto/async_tx/async_xor.c | 15 ++++++++++++--- drivers/dma/Kconfig | 2 ++ drivers/dma/dmaengine.c | 6 ++++++ drivers/dma/ioat/dma_v3.c | 10 ++++++++++ 6 files changed, 46 insertions(+), 6 deletions(-) diff --git a/crypto/async_tx/Kconfig b/crypto/async_tx/Kconfig index e5aeb2b79e6..e28e276ac61 100644 --- a/crypto/async_tx/Kconfig +++ b/crypto/async_tx/Kconfig @@ -23,3 +23,8 @@ config ASYNC_RAID6_RECOV select ASYNC_CORE select ASYNC_PQ +config ASYNC_TX_DISABLE_PQ_VAL_DMA + bool + +config ASYNC_TX_DISABLE_XOR_VAL_DMA + bool diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c index 6b5cc4fba59..ec87f53d505 100644 --- a/crypto/async_tx/async_pq.c +++ b/crypto/async_tx/async_pq.c @@ -240,6 +240,16 @@ async_gen_syndrome(struct page **blocks, unsigned int offset, int disks, } EXPORT_SYMBOL_GPL(async_gen_syndrome); +static inline struct dma_chan * +pq_val_chan(struct async_submit_ctl *submit, struct page **blocks, int disks, size_t len) +{ + #ifdef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA + return NULL; + #endif + return async_tx_find_channel(submit, DMA_PQ_VAL, NULL, 0, blocks, + disks, len); +} + /** * async_syndrome_val - asynchronously validate a raid6 syndrome * @blocks: source blocks from idx 0..disks-3, P @ disks-2 and Q @ disks-1 @@ -260,9 +270,7 @@ async_syndrome_val(struct page **blocks, unsigned int offset, int disks, size_t len, enum sum_check_flags *pqres, struct page *spare, struct async_submit_ctl *submit) { - struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ_VAL, - NULL, 0, blocks, disks, - len); + struct dma_chan *chan = pq_val_chan(submit, blocks, disks, len); struct dma_device *device = chan ? chan->device : NULL; struct dma_async_tx_descriptor *tx; unsigned char coefs[disks-2]; diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c index 79182dcb91b..079ae8ca590 100644 --- a/crypto/async_tx/async_xor.c +++ b/crypto/async_tx/async_xor.c @@ -234,6 +234,17 @@ static int page_is_zero(struct page *p, unsigned int offset, size_t len) memcmp(a, a + 4, len - 4) == 0); } +static inline struct dma_chan * +xor_val_chan(struct async_submit_ctl *submit, struct page *dest, + struct page **src_list, int src_cnt, size_t len) +{ + #ifdef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA + return NULL; + #endif + return async_tx_find_channel(submit, DMA_XOR_VAL, &dest, 1, src_list, + src_cnt, len); +} + /** * async_xor_val - attempt a xor parity check with a dma engine. * @dest: destination page used if the xor is performed synchronously @@ -255,9 +266,7 @@ async_xor_val(struct page *dest, struct page **src_list, unsigned int offset, int src_cnt, size_t len, enum sum_check_flags *result, struct async_submit_ctl *submit) { - struct dma_chan *chan = async_tx_find_channel(submit, DMA_XOR_VAL, - &dest, 1, src_list, - src_cnt, len); + struct dma_chan *chan = xor_val_chan(submit, dest, src_list, src_cnt, len); struct dma_device *device = chan ? chan->device : NULL; struct dma_async_tx_descriptor *tx = NULL; dma_addr_t *dma_src = NULL; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 5903a88351b..b401dadad4a 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -26,6 +26,8 @@ config INTEL_IOATDMA select DMA_ENGINE select DCA select ASYNC_TX_DISABLE_CHANNEL_SWITCH + select ASYNC_TX_DISABLE_PQ_VAL_DMA + select ASYNC_TX_DISABLE_XOR_VAL_DMA help Enable support for the Intel(R) I/OAT DMA engine present in recent Intel Xeon chipsets. diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index b6442f09d0f..8f99354082c 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -632,16 +632,22 @@ static bool device_has_all_tx_types(struct dma_device *device) #if defined(CONFIG_ASYNC_XOR) || defined(CONFIG_ASYNC_XOR_MODULE) if (!dma_has_cap(DMA_XOR, device->cap_mask)) return false; + + #ifndef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA if (!dma_has_cap(DMA_XOR_VAL, device->cap_mask)) return false; #endif + #endif #if defined(CONFIG_ASYNC_PQ) || defined(CONFIG_ASYNC_PQ_MODULE) if (!dma_has_cap(DMA_PQ, device->cap_mask)) return false; + + #ifndef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA if (!dma_has_cap(DMA_PQ_VAL, device->cap_mask)) return false; #endif + #endif return true; } diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 252cf2d3f1d..189788f6351 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -1206,6 +1206,16 @@ int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca) device->timer_fn = ioat2_timer_event; } + #ifdef CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA + dma_cap_clear(DMA_PQ_VAL, dma->cap_mask); + dma->device_prep_dma_pq_val = NULL; + #endif + + #ifdef CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA + dma_cap_clear(DMA_XOR_VAL, dma->cap_mask); + dma->device_prep_dma_xor_val = NULL; + #endif + /* -= IOAT ver.3 workarounds =- */ /* Write CHANERRMSK_INT with 3E07h to mask out the errors * that can cause stability issues for IOAT ver.3 -- GitLab From 49954c1567cb0d70d28bb5512d471dc5bd4e2c3f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Nov 2009 17:11:03 -0700 Subject: [PATCH 0991/1165] ioat3: fix pq completion versus channel deallocation race The completion of a pq operation is notified with a null descriptor appended to the end of the chain. This descriptor needs to be visible to dma clients otherwise the client is precluded from ensuring all operations are quiesced before freeing channel resources, i.e. due to descriptor polling it may get the completion notification ahead of the interrupt delivered by the null descriptor. Signed-off-by: Dan Williams --- drivers/dma/ioat/dma_v3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat/dma_v3.c b/drivers/dma/ioat/dma_v3.c index 189788f6351..42f6f10fb0c 100644 --- a/drivers/dma/ioat/dma_v3.c +++ b/drivers/dma/ioat/dma_v3.c @@ -571,7 +571,7 @@ __ioat3_prep_xor_lock(struct dma_chan *c, enum sum_check_flags *result, dump_desc_dbg(ioat, compl_desc); /* we leave the channel locked to ensure in order submission */ - return &desc->txd; + return &compl_desc->txd; } static struct dma_async_tx_descriptor * @@ -730,7 +730,7 @@ __ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result, dump_desc_dbg(ioat, compl_desc); /* we leave the channel locked to ensure in order submission */ - return &desc->txd; + return &compl_desc->txd; } static struct dma_async_tx_descriptor * -- GitLab From 4ff1fa278b0bd1b2dd3c42efc0cb86788ffe05d5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 18 Nov 2009 18:03:19 +0000 Subject: [PATCH 0992/1165] [ARM] kmap: fix build errors with DEBUG_HIGHMEM enabled d451564 broke ARM by requiring KM_IRQ_PTE, KM_NMI and KM_NMI_PTE to always be defined. Solve this by providing invalid definitions for these constants, but only if CONFIG_DEBUG_HIGHMEM is enabled. Signed-off-by: Russell King --- arch/arm/include/asm/kmap_types.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h index d16ec97ec9a..c019949a518 100644 --- a/arch/arm/include/asm/kmap_types.h +++ b/arch/arm/include/asm/kmap_types.h @@ -22,4 +22,10 @@ enum km_type { KM_TYPE_NR }; +#ifdef CONFIG_DEBUG_HIGHMEM +#define KM_NMI (-1) +#define KM_NMI_PTE (-1) +#define KM_IRQ_PTE (-1) +#endif + #endif -- GitLab From 1508c99506b5d57b8892a5d759176000c88c93b6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Nov 2009 13:07:57 +0000 Subject: [PATCH 0993/1165] ARM: PNX4008: fix watchdog device driver name The PNX core code calls the device 'pnx4008-watchdog' not 'watchdog' Signed-off-by: Russell King Acked-by: Wim Van Sebroeck --- drivers/watchdog/pnx4008_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/pnx4008_wdt.c b/drivers/watchdog/pnx4008_wdt.c index f24d04132ed..4d227b15200 100644 --- a/drivers/watchdog/pnx4008_wdt.c +++ b/drivers/watchdog/pnx4008_wdt.c @@ -317,7 +317,7 @@ static int __devexit pnx4008_wdt_remove(struct platform_device *pdev) static struct platform_driver platform_wdt_driver = { .driver = { - .name = "watchdog", + .name = "pnx4008-watchdog", .owner = THIS_MODULE, }, .probe = pnx4008_wdt_probe, @@ -352,4 +352,4 @@ MODULE_PARM_DESC(nowayout, MODULE_LICENSE("GPL"); MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -MODULE_ALIAS("platform:watchdog"); +MODULE_ALIAS("platform:pnx4008-watchdog"); -- GitLab From 463bf9000750e08a85ee0b40da3266aae8a54ba2 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 20 Nov 2009 09:21:12 -0500 Subject: [PATCH 0994/1165] kconfig: Fix make O= local{mod,yes}config When the output directory is something other than the kernel source, the streamline_config script gets confused. This patch passes in the source directory to the script so that it can find the proper files. Reported-by: Peter Zijlstra Tested-by: Peter Zijlstra Signed-off-by: Steven Rostedt --- scripts/kconfig/Makefile | 4 ++-- scripts/kconfig/streamline_config.pl | 12 ++++++------ 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 6d69c7ccdcc..80599e3a799 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -30,7 +30,7 @@ silentoldconfig: $(obj)/conf $< -s $(Kconfig) localmodconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)perl $< $(Kconfig) > .tmp.config + $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ (mv -f .config .config.old.1; \ @@ -44,7 +44,7 @@ localmodconfig: $(obj)/streamline_config.pl $(obj)/conf $(Q)rm -f .tmp.config localyesconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)perl $< $(Kconfig) > .tmp.config + $(Q)perl $< $(srctree) $(Kconfig) > .tmp.config $(Q)sed -i s/=m/=y/ .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ diff --git a/scripts/kconfig/streamline_config.pl b/scripts/kconfig/streamline_config.pl index 95984db8e1e..0d800820c3c 100644 --- a/scripts/kconfig/streamline_config.pl +++ b/scripts/kconfig/streamline_config.pl @@ -43,7 +43,6 @@ # make oldconfig # my $config = ".config"; -my $linuxpath = "."; my $uname = `uname -r`; chomp $uname; @@ -111,7 +110,11 @@ sub find_config { find_config; -my @makefiles = `find $linuxpath -name Makefile`; +# Get the build source and top level Kconfig file (passed in) +my $ksource = $ARGV[0]; +my $kconfig = $ARGV[1]; + +my @makefiles = `find $ksource -name Makefile`; my %depends; my %selects; my %prompts; @@ -119,9 +122,6 @@ my %objects; my $var; my $cont = 0; -# Get the top level Kconfig file (passed in) -my $kconfig = $ARGV[0]; - # prevent recursion my %read_kconfigs; @@ -132,7 +132,7 @@ sub read_kconfig { my $config; my @kconfigs; - open(KIN, $kconfig) || die "Can't open $kconfig"; + open(KIN, "$ksource/$kconfig") || die "Can't open $kconfig"; while () { chomp; -- GitLab From 68a31de302bae12010ab116752d4362bd7fe2851 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 20 Nov 2009 17:50:34 +0100 Subject: [PATCH 0995/1165] [ARM] pxa/cpufreq: fix index assignments for end marker I stumbled over two small things regarding the .index field assignment in the dynamically created cpu frequency tables for pxa2xx and pxa3xx. Even though that doesn't currently cause any problem, it should still be fixed in case the logic in the CPUFREQ core changes. Signed-off-by: Daniel Mack Signed-off-by: Eric Miao --- arch/arm/mach-pxa/cpufreq-pxa2xx.c | 1 + arch/arm/mach-pxa/cpufreq-pxa3xx.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/cpufreq-pxa2xx.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c index 983cc8c2008..9e4d9816726 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa2xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c @@ -447,6 +447,7 @@ static __init int pxa_cpufreq_init(struct cpufreq_policy *policy) pxa27x_freq_table[i].frequency = freq; pxa27x_freq_table[i].index = i; } + pxa27x_freq_table[i].index = i; pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; /* diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 67f34a8d8e6..149cdd9aee4 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -102,7 +102,7 @@ static int setup_freqs_table(struct cpufreq_policy *policy, table[i].index = i; table[i].frequency = freqs[i].cpufreq_mhz * 1000; } - table[num].frequency = i; + table[num].index = i; table[num].frequency = CPUFREQ_TABLE_END; pxa3xx_freqs = freqs; -- GitLab From 30b768323f87bca15f14d6d146da397f98c29fe6 Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Fri, 20 Nov 2009 04:02:27 +0000 Subject: [PATCH 0996/1165] ixgbe: move tc variable to CONFIG_IXGBE_DCB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit tc is required by CONFIG_IXGBE_DCB. This also fixes compilation warning: drivers/net/ixgbe/ixgbe_main.c: In function ‘ixgbe_tx_is_paused’: drivers/net/ixgbe/ixgbe_main.c:245: warning: unused variable ‘tc’ Signed-off-by: Jaswinder Singh Rajput Acked-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index a5036f7c192..a456578b857 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -240,11 +240,11 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring) { - int tc; u32 txoff = IXGBE_TFCS_TXOFF; #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + int tc; int reg_idx = tx_ring->reg_idx; int dcb_i = adapter->ring_feature[RING_F_DCB].indices; -- GitLab From 0109d7e614e016a842569628116f54847a177f6e Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 20 Nov 2009 21:50:36 +0000 Subject: [PATCH 0997/1165] SLOW_WORK: Fix CIFS to pass THIS_MODULE to slow_work_register_user() As of the patch: SLOW_WORK: Wait for outstanding work items belonging to a module to clear Wait for outstanding slow work items belonging to a module to clear when unregistering that module as a user of the facility. This prevents the put_ref code of a work item from being taken away before it returns. slow_work_register_user() takes a module pointer as an argument. CIFS must now pass THIS_MODULE as that argument, lest the following error be observed: fs/cifs/cifsfs.c: In function 'init_cifs': fs/cifs/cifsfs.c:1040: error: too few arguments to function 'slow_work_register_user' Signed-off-by: David Howells --- fs/cifs/cifsfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 9a5e4f5f312..29f1da761bb 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -1037,7 +1037,7 @@ init_cifs(void) if (rc) goto out_unregister_key_type; #endif - rc = slow_work_register_user(); + rc = slow_work_register_user(THIS_MODULE); if (rc) goto out_unregister_resolver_key; -- GitLab From 1c2ea8a2c0b71cc5e07f518370d458d692c9b21a Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 20 Nov 2009 21:50:40 +0000 Subject: [PATCH 0998/1165] SLOW_WORK: Fix GFS2 to #include before using THIS_MODULE GFS2 has been altered to pass THIS_MODULE to slow_work_register_user(), but hasn't been altered to #include to provide it, resulting in the following error: fs/gfs2/recovery.c:596: error: 'THIS_MODULE' undeclared here (not in a function) Add the missing #include. Signed-off-by: David Howells --- fs/gfs2/recovery.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/gfs2/recovery.c b/fs/gfs2/recovery.c index b2bb779f09e..09fa3196557 100644 --- a/fs/gfs2/recovery.c +++ b/fs/gfs2/recovery.c @@ -7,6 +7,7 @@ * of the GNU General Public License version 2. */ +#include #include #include #include -- GitLab From 4fa9f4ede88b4e2ff135b6e5717499d734508c62 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 20 Nov 2009 21:50:44 +0000 Subject: [PATCH 0999/1165] FS-Cache: Provide nop fscache_stat_d() if CONFIG_FSCACHE_STATS=n Provide nop fscache_stat_d() macro if CONFIG_FSCACHE_STATS=n lest errors like the following occur: fs/fscache/cache.c: In function 'fscache_withdraw_cache': fs/fscache/cache.c:386: error: implicit declaration of function 'fscache_stat_d' fs/fscache/cache.c:386: error: 'fscache_n_cop_sync_cache' undeclared (first use in this function) fs/fscache/cache.c:386: error: (Each undeclared identifier is reported only once fs/fscache/cache.c:386: error: for each function it appears in.) fs/fscache/cache.c:392: error: 'fscache_n_cop_dissociate_pages' undeclared (first use in this function) Signed-off-by: David Howells --- fs/fscache/internal.h | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/fscache/internal.h b/fs/fscache/internal.h index 0ca2566e038..edd7434ab6e 100644 --- a/fs/fscache/internal.h +++ b/fs/fscache/internal.h @@ -259,6 +259,7 @@ extern const struct file_operations fscache_stats_fops; #define __fscache_stat(stat) (NULL) #define fscache_stat(stat) do {} while (0) +#define fscache_stat_d(stat) do {} while (0) #endif /* -- GitLab From 38eb394e33d65abb9d05411547d2058db53b4d23 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:34:20 +0000 Subject: [PATCH 1000/1165] e1000e: partial revert of 3ec2a2b8 plus FC workraround for 82577/8 Commit 3ec2a2b80f3eb53851fe4cef9e65b5d33376ef89 broke Tx/Rx when using jumbo frames on certain parts (i.e. only PAUSE frames could be exchanged once the high water mark was reached preventing normal packet traffic). This patch reverts the breakage and sets appropriate high and low water marks of the Rx FIFO for 82577/82578 which require a workaround due to a flow control issue in hardware. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 2 ++ drivers/net/e1000e/ich8lan.c | 1 + drivers/net/e1000e/netdev.c | 41 +++++++++++++++++++++++++----------- 3 files changed, 32 insertions(+), 12 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 189dfa2d6c7..3e187b0e420 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -141,6 +141,8 @@ struct e1000_info; #define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */ #define HV_TNCRS_LOWER PHY_REG(778, 30) +#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */ + /* BM PHY Copper Specific Status */ #define BM_CS_STATUS 17 #define BM_CS_STATUS_LINK_UP 0x0400 diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 51ddb04ab19..92cf1033365 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -3558,6 +3558,7 @@ struct e1000_info e1000_pch_info = { | FLAG_HAS_AMT | FLAG_HAS_FLASH | FLAG_HAS_JUMBO_FRAMES + | FLAG_DISABLE_FC_PAUSE_TIME /* errata */ | FLAG_APME_IN_WUC, .pba = 26, .max_hw_frame_size = 4096, diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 0687c6aa4e4..a1a5a6f15a6 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2769,25 +2769,38 @@ void e1000e_reset(struct e1000_adapter *adapter) /* * flow control settings * - * The high water mark must be low enough to fit two full frame + * The high water mark must be low enough to fit one full frame * (or the size used for early receive) above it in the Rx FIFO. * Set it to the lower of: * - 90% of the Rx FIFO size, and * - the full Rx FIFO size minus the early receive size (for parts * with ERT support assuming ERT set to E1000_ERT_2048), or - * - the full Rx FIFO size minus two full frames + * - the full Rx FIFO size minus one full frame */ - if ((adapter->flags & FLAG_HAS_ERT) && - (adapter->netdev->mtu > ETH_DATA_LEN)) - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - (E1000_ERT_2048 << 3))); - else - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - (2 * adapter->max_frame_size))); + if (hw->mac.type == e1000_pchlan) { + /* + * Workaround PCH LOM adapter hangs with certain network + * loads. If hangs persist, try disabling Tx flow control. + */ + if (adapter->netdev->mtu > ETH_DATA_LEN) { + fc->high_water = 0x3500; + fc->low_water = 0x1500; + } else { + fc->high_water = 0x5000; + fc->low_water = 0x3000; + } + } else { + if ((adapter->flags & FLAG_HAS_ERT) && + (adapter->netdev->mtu > ETH_DATA_LEN)) + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - (E1000_ERT_2048 << 3))); + else + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - adapter->max_frame_size)); - fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ - fc->low_water = (fc->high_water - (2 * adapter->max_frame_size)); - fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */ + fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ + fc->low_water = fc->high_water - 8; + } if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) fc->pause_time = 0xFFFF; @@ -2813,6 +2826,10 @@ void e1000e_reset(struct e1000_adapter *adapter) if (mac->ops.init_hw(hw)) e_err("Hardware Error\n"); + /* additional part of the flow-control workaround above */ + if (hw->mac.type == e1000_pchlan) + ew32(FCRTV_PCH, 0x1000); + e1000_update_mng_vlan(adapter); /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ -- GitLab From 842ec8b64ac34e9b245da31b4a5a49c3e744a714 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:34:40 +0000 Subject: [PATCH 1001/1165] e1000e: read of PHY register may access wrong page on 82578 Remove unnecessary workaround that mistakenly does not perform a page select operation for PHY registers 29 and 30 (assuming these are the PHY debug port address and data registers) on 82578 which can cause reads of the Transmit with No Carrier Sense statistics register on page 778 to be read from an incorrect page. Also error out if the page select operation fails. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/phy.c | 46 +++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 24 deletions(-) diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 03175b3a2c9..8189d00bfef 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -2658,19 +2658,18 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, page = 0; if (reg > MAX_PHY_MULTI_PAGE_REG) { - if ((hw->phy.type != e1000_phy_82578) || - ((reg != I82578_ADDR_REG) && - (reg != I82578_ADDR_REG + 1))) { - u32 phy_addr = hw->phy.addr; + u32 phy_addr = hw->phy.addr; - hw->phy.addr = 1; + hw->phy.addr = 1; - /* Page is shifted left, PHY expects (page x 32) */ - ret_val = e1000e_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (page << IGP_PAGE_SHIFT)); - hw->phy.addr = phy_addr; - } + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (page << IGP_PAGE_SHIFT)); + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, @@ -2678,7 +2677,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); if (!locked) hw->phy.ops.release_phy(hw); @@ -2784,19 +2783,18 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, } if (reg > MAX_PHY_MULTI_PAGE_REG) { - if ((hw->phy.type != e1000_phy_82578) || - ((reg != I82578_ADDR_REG) && - (reg != I82578_ADDR_REG + 1))) { - u32 phy_addr = hw->phy.addr; + u32 phy_addr = hw->phy.addr; - hw->phy.addr = 1; + hw->phy.addr = 1; - /* Page is shifted left, PHY expects (page x 32) */ - ret_val = e1000e_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (page << IGP_PAGE_SHIFT)); - hw->phy.addr = phy_addr; - } + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (page << IGP_PAGE_SHIFT)); + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, @@ -2805,7 +2803,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); if (!locked) hw->phy.ops.release_phy(hw); -- GitLab From 29afd690636dab36fe437c54b3a9d5e093bdcd9b Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:35:08 +0000 Subject: [PATCH 1002/1165] e1000e: set flow control thresholds properly after enabling/disabling pause When flow control (pause) parameters were changed via ethtool (i.e. enabled or disabled), the newly calculated thresholds were not being written to the device for non-fiber media. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ethtool.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 1bf4d2a5d34..e82638ecae8 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -327,10 +327,18 @@ static int e1000_set_pauseparam(struct net_device *netdev, hw->fc.current_mode = hw->fc.requested_mode; - retval = ((hw->phy.media_type == e1000_media_type_fiber) ? - hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw)); + if (hw->phy.media_type == e1000_media_type_fiber) { + retval = hw->mac.ops.setup_link(hw); + /* implicit goto out */ + } else { + retval = e1000e_force_mac_fc(hw); + if (retval) + goto out; + e1000e_set_fc_watermarks(hw); + } } +out: clear_bit(__E1000_RESETTING, &adapter->state); return retval; } -- GitLab From 4c86e0b9455c8fa8122fc2d10935e892838c8568 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:35:26 +0000 Subject: [PATCH 1003/1165] e1000e: add Tx timeout factor for 100Mbps On some devices (e.g. 82578) not having a Tx timeout factor when linked at 100Mbps can cause false reports of hardware hangs on busy hubs. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index a1a5a6f15a6..63458270ce1 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -3627,7 +3627,7 @@ static void e1000_watchdog_task(struct work_struct *work) case SPEED_100: txb2b = 0; netdev->tx_queue_len = 100; - /* maybe add some timeout factor ? */ + adapter->tx_timeout_factor = 10; break; } -- GitLab From 610c992884c80566de31d71ec361a5a7b2a0ed5e Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:35:45 +0000 Subject: [PATCH 1004/1165] e1000e: flow control thresholds not correct when changing mtu When changing MTU, save it off prior to resetting otherwise the flow control thresholds may be miscalculated. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 63458270ce1..fad8f9ea004 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4305,8 +4305,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) msleep(1); - /* e1000e_down has a dependency on max_frame_size */ + /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */ adapter->max_frame_size = max_frame; + e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); + netdev->mtu = new_mtu; if (netif_running(netdev)) e1000e_down(adapter); @@ -4336,9 +4338,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; - e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); - netdev->mtu = new_mtu; - if (netif_running(netdev)) e1000e_up(adapter); else -- GitLab From 189983d469c6d98e64ddfb9f9ce76725cb082ee5 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 12:36:04 +0000 Subject: [PATCH 1005/1165] e1000e: remove unnecessary 82577 workaround causing link issues A workaround for pre-release versions of 82577 is causing link issues on some switches. The workaround is no longer needed on production parts so remove it. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/phy.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 8189d00bfef..85f955f7041 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -71,7 +71,6 @@ static const u16 e1000_igp_2_cable_length_table[] = #define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) #define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */ #define I82577_CTRL_REG 23 -#define I82577_CTRL_DOWNSHIFT_MASK (7 << 10) /* 82577 specific PHY registers */ #define I82577_PHY_CTRL_2 18 @@ -660,15 +659,6 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data); - if (ret_val) - goto out; - - /* Set number of link attempts before downshift */ - ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data); - if (ret_val) - goto out; - phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK; - ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data); out: return ret_val; -- GitLab From 818f33313caab9be2a10458500dbed4a88c1b334 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Thu, 19 Nov 2009 14:17:30 +0000 Subject: [PATCH 1006/1165] e1000e: do not initiate autonegotiation during OEM configuration When configuring the OEM bits in the PHY on 82577/82578, do not restart autonegotiation if the firmware is blocking it (e.g. when an IDE-R session is active) because the link must not go down. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 92cf1033365..eff3f478365 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1118,7 +1118,8 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) oem_reg |= HV_OEM_BITS_LPLU; } /* Restart auto-neg to activate the bits */ - oem_reg |= HV_OEM_BITS_RESTART_AN; + if (!e1000_check_reset_block(hw)) + oem_reg |= HV_OEM_BITS_RESTART_AN; ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg); out: -- GitLab From 0ebe74e7ba5929f46d5db4d735a9d7a85a38976b Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 20 Nov 2009 09:19:10 +0000 Subject: [PATCH 1007/1165] net: ETHOC should depend on HAS_DMA When building for Sun 3: drivers/net/ethoc.c:1091: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `ethoc_probe': drivers/net/ethoc.c:965: undefined reference to `dma_alloc_coherent' drivers/net/ethoc.c:1063: undefined reference to `dma_free_coherent' Signed-off-by: Geert Uytterhoeven Signed-off-by: David S. Miller --- drivers/net/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index e19ca4bb751..b2f71f79baa 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -975,7 +975,7 @@ config ENC28J60_WRITEVERIFY config ETHOC tristate "OpenCores 10/100 Mbps Ethernet MAC support" - depends on NET_ETHERNET && HAS_IOMEM + depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA select MII select PHYLIB select CRC32 -- GitLab From 4a91ca4e18553b1f96ce68216459c7d9669f8b3d Mon Sep 17 00:00:00 2001 From: "David J. Choi" Date: Thu, 19 Nov 2009 15:34:30 +0000 Subject: [PATCH 1008/1165] drivers/net: ks8851_mll ethernet network driver -resubmit Summary of Changes: -Fix to receive multicast packets by setting the corresponding hardware bit during initialization. -Fix to re-enable the interface [by interface up command(ifup)] while the interface is down. -Fix to be able to down the interface by passing the last parameter correctly to request_irq(). -Remove to read 4 extra bytes from the receiving queue after reading a packet, even though it does not cause a predictable issue now. -Remove occurrences of transmission done interrupt in order to tx throughput enhancement. -Enable IP checksum for packet receiving by setting the corresponding hardware bit during initialization. -Relocate ks_enable_int()/ks_disable_int() in order not to declare those functions at the beginning of the file. -Rename ks_enable()/_disable() to ks_enable_qmu()/ks_disable_qmu() in order to give more meaningful names and relocate them not declaire those functions at the beginning of the file. Signed-off-by: David J. Choi Signed-off-by: David S. Miller --- drivers/net/ks8851_mll.c | 142 +++++++++++++++++++-------------------- 1 file changed, 68 insertions(+), 74 deletions(-) diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c index 0be14d702be..c146304d8d6 100644 --- a/drivers/net/ks8851_mll.c +++ b/drivers/net/ks8851_mll.c @@ -568,6 +568,16 @@ static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len) iowrite16(*wptr++, ks->hw_addr); } +static void ks_disable_int(struct ks_net *ks) +{ + ks_wrreg16(ks, KS_IER, 0x0000); +} /* ks_disable_int */ + +static void ks_enable_int(struct ks_net *ks) +{ + ks_wrreg16(ks, KS_IER, ks->rc_ier); +} /* ks_enable_int */ + /** * ks_tx_fifo_space - return the available hardware buffer size. * @ks: The chip information @@ -681,6 +691,47 @@ static void ks_soft_reset(struct ks_net *ks, unsigned op) } +void ks_enable_qmu(struct ks_net *ks) +{ + u16 w; + + w = ks_rdreg16(ks, KS_TXCR); + /* Enables QMU Transmit (TXCR). */ + ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE); + + /* + * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame + * Enable + */ + + w = ks_rdreg16(ks, KS_RXQCR); + ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE); + + /* Enables QMU Receive (RXCR1). */ + w = ks_rdreg16(ks, KS_RXCR1); + ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE); + ks->enabled = true; +} /* ks_enable_qmu */ + +static void ks_disable_qmu(struct ks_net *ks) +{ + u16 w; + + w = ks_rdreg16(ks, KS_TXCR); + + /* Disables QMU Transmit (TXCR). */ + w &= ~TXCR_TXE; + ks_wrreg16(ks, KS_TXCR, w); + + /* Disables QMU Receive (RXCR1). */ + w = ks_rdreg16(ks, KS_RXCR1); + w &= ~RXCR1_RXE ; + ks_wrreg16(ks, KS_RXCR1, w); + + ks->enabled = false; + +} /* ks_disable_qmu */ + /** * ks_read_qmu - read 1 pkt data from the QMU. * @ks: The chip information @@ -752,7 +803,7 @@ static void ks_rcv(struct ks_net *ks, struct net_device *netdev) (frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) { skb_reserve(skb, 2); /* read data block including CRC 4 bytes */ - ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4); + ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len); skb_put(skb, frame_hdr->len); skb->dev = netdev; skb->protocol = eth_type_trans(skb, netdev); @@ -861,7 +912,7 @@ static int ks_net_open(struct net_device *netdev) ks_dbg(ks, "%s - entry\n", __func__); /* reset the HW */ - err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, ks); + err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev); if (err) { printk(KERN_ERR "Failed to request IRQ: %d: %d\n", @@ -869,6 +920,15 @@ static int ks_net_open(struct net_device *netdev) return err; } + /* wake up powermode to normal mode */ + ks_set_powermode(ks, PMECR_PM_NORMAL); + mdelay(1); /* wait for normal mode to take effect */ + + ks_wrreg16(ks, KS_ISR, 0xffff); + ks_enable_int(ks); + ks_enable_qmu(ks); + netif_start_queue(ks->netdev); + if (netif_msg_ifup(ks)) ks_dbg(ks, "network device %s up\n", netdev->name); @@ -892,19 +952,14 @@ static int ks_net_stop(struct net_device *netdev) netif_stop_queue(netdev); - kfree(ks->frame_head_info); - mutex_lock(&ks->lock); /* turn off the IRQs and ack any outstanding */ ks_wrreg16(ks, KS_IER, 0x0000); ks_wrreg16(ks, KS_ISR, 0xffff); - /* shutdown RX process */ - ks_wrreg16(ks, KS_RXCR1, 0x0000); - - /* shutdown TX process */ - ks_wrreg16(ks, KS_TXCR, 0x0000); + /* shutdown RX/TX QMU */ + ks_disable_qmu(ks); /* set powermode to soft power down to save power */ ks_set_powermode(ks, PMECR_PM_SOFTDOWN); @@ -929,17 +984,8 @@ static int ks_net_stop(struct net_device *netdev) */ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len) { - unsigned fid = ks->fid; - - fid = ks->fid; - ks->fid = (ks->fid + 1) & TXFR_TXFID_MASK; - - /* reduce the tx interrupt occurrances. */ - if (!fid) - fid |= TXFR_TXIC; /* irq on completion */ - /* start header at txb[0] to align txw entries */ - ks->txh.txw[0] = cpu_to_le16(fid); + ks->txh.txw[0] = 0; ks->txh.txw[1] = cpu_to_le16(len); /* 1. set sudo-DMA mode */ @@ -957,16 +1003,6 @@ static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len) ; } -static void ks_disable_int(struct ks_net *ks) -{ - ks_wrreg16(ks, KS_IER, 0x0000); -} /* ks_disable_int */ - -static void ks_enable_int(struct ks_net *ks) -{ - ks_wrreg16(ks, KS_IER, ks->rc_ier); -} /* ks_enable_int */ - /** * ks_start_xmit - transmit packet * @skb : The buffer to transmit @@ -1410,25 +1446,6 @@ static int ks_read_selftest(struct ks_net *ks) return ret; } -static void ks_disable(struct ks_net *ks) -{ - u16 w; - - w = ks_rdreg16(ks, KS_TXCR); - - /* Disables QMU Transmit (TXCR). */ - w &= ~TXCR_TXE; - ks_wrreg16(ks, KS_TXCR, w); - - /* Disables QMU Receive (RXCR1). */ - w = ks_rdreg16(ks, KS_RXCR1); - w &= ~RXCR1_RXE ; - ks_wrreg16(ks, KS_RXCR1, w); - - ks->enabled = false; - -} /* ks_disable */ - static void ks_setup(struct ks_net *ks) { u16 w; @@ -1463,7 +1480,7 @@ static void ks_setup(struct ks_net *ks) w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP; ks_wrreg16(ks, KS_TXCR, w); - w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE; + w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE | RXCR1_RXME | RXCR1_RXIPFCC; if (ks->promiscuous) /* bPromiscuous */ w |= (RXCR1_RXAE | RXCR1_RXINVF); @@ -1486,28 +1503,6 @@ static void ks_setup_int(struct ks_net *ks) ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI); } /* ks_setup_int */ -void ks_enable(struct ks_net *ks) -{ - u16 w; - - w = ks_rdreg16(ks, KS_TXCR); - /* Enables QMU Transmit (TXCR). */ - ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE); - - /* - * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame - * Enable - */ - - w = ks_rdreg16(ks, KS_RXQCR); - ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE); - - /* Enables QMU Receive (RXCR1). */ - w = ks_rdreg16(ks, KS_RXCR1); - ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE); - ks->enabled = true; -} /* ks_enable */ - static int ks_hw_init(struct ks_net *ks) { #define MHEADER_SIZE (sizeof(struct type_frame_head) * MAX_RECV_FRAMES) @@ -1612,11 +1607,9 @@ static int __devinit ks8851_probe(struct platform_device *pdev) ks_soft_reset(ks, GRR_GSR); ks_hw_init(ks); - ks_disable(ks); + ks_disable_qmu(ks); ks_setup(ks); ks_setup_int(ks); - ks_enable_int(ks); - ks_enable(ks); memcpy(netdev->dev_addr, ks->mac_addr, 6); data = ks_rdreg16(ks, KS_OBCR); @@ -1658,6 +1651,7 @@ static int __devexit ks8851_remove(struct platform_device *pdev) struct ks_net *ks = netdev_priv(netdev); struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + kfree(ks->frame_head_info); unregister_netdev(netdev); iounmap(ks->hw_addr); free_netdev(netdev); -- GitLab From 507eebef86a59713c2180c813d90f98a7bf6c2b4 Mon Sep 17 00:00:00 2001 From: "chaithrika@ti.com" Date: Thu, 1 Oct 2009 10:25:19 +0000 Subject: [PATCH 1009/1165] TI DaVinci EMAC: Minor macro related updates Use BIT for macro definitions wherever possible, remove unused and redundant macros. Signed-off-by: Chaithrika U S Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index db638037947..e3478314c00 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -164,16 +164,14 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; # define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7) /* EMAC mac_control register */ -#define EMAC_MACCONTROL_TXPTYPE (0x200) -#define EMAC_MACCONTROL_TXPACEEN (0x40) -#define EMAC_MACCONTROL_MIIEN (0x20) -#define EMAC_MACCONTROL_GIGABITEN (0x80) -#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7) -#define EMAC_MACCONTROL_FULLDUPLEXEN (0x1) +#define EMAC_MACCONTROL_TXPTYPE BIT(9) +#define EMAC_MACCONTROL_TXPACEEN BIT(6) +#define EMAC_MACCONTROL_GMIIEN BIT(5) +#define EMAC_MACCONTROL_GIGABITEN BIT(7) +#define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0) #define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15) /* GIGABIT MODE related bits */ -#define EMAC_DM646X_MACCONTORL_GMIIEN BIT(5) #define EMAC_DM646X_MACCONTORL_GIG BIT(7) #define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17) @@ -192,10 +190,10 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF) /* MAC_IN_VECTOR (0x180) register bit fields */ -#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT (0x20000) -#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT (0x10000) -#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC (0x0100) -#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC (0x01) +#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17) +#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16) +#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8) +#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0) /** NOTE:: For DM646x the IN_VECTOR has changed */ #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH) @@ -203,7 +201,6 @@ static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1"; #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26) #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27) - /* CPPI bit positions */ #define EMAC_CPPI_SOP_BIT BIT(31) #define EMAC_CPPI_EOP_BIT BIT(30) @@ -750,8 +747,7 @@ static void emac_update_phystatus(struct emac_priv *priv) if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) { mac_control = emac_read(EMAC_MACCONTROL); - mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN | - EMAC_DM646X_MACCONTORL_GIG | + mac_control |= (EMAC_DM646X_MACCONTORL_GIG | EMAC_DM646X_MACCONTORL_GIGFORCE); } else { /* Clear the GIG bit and GIGFORCE bit */ @@ -2108,7 +2104,7 @@ static int emac_hw_enable(struct emac_priv *priv) /* Enable MII */ val = emac_read(EMAC_MACCONTROL); - val |= (EMAC_MACCONTROL_MIIEN); + val |= (EMAC_MACCONTROL_GMIIEN); emac_write(EMAC_MACCONTROL, val); /* Enable NAPI and interrupts */ -- GitLab From 31769cef2e973544164aa7d0db2e2024660d5e21 Mon Sep 17 00:00:00 2001 From: Jay Fenlason Date: Sat, 21 Nov 2009 00:05:56 +0100 Subject: [PATCH 1010/1165] firewire: ohci: pass correct iso xmit timestamps to core Here is the final set of patches I used to get ffado to work with the new firewire stack. With these patches, I was able to start ardour and record from and playback to my PreSonus Inspire1394 from a (mostly) Fedora 12 system. Signed-off-by: Jay Fenlason Until now, firewire-ohci exposed only the transmit cycle of the last transmitted packet at each isochronous transmit complete event. This made it impossible for FFADO (FireWire audio drivers in userspace) to synchronize audio-out streams. The fix is to store the timestamp of each packet in the iso xmit event. As a bonus, the transfer status is stored too. Signed-off-by: Stefan Richter --- drivers/firewire/ohci.c | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index c07cfada190..94260aa76aa 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -1904,15 +1904,30 @@ static int handle_it_packet(struct context *context, { struct iso_context *ctx = container_of(context, struct iso_context, context); + int i; + struct descriptor *pd; - if (last->transfer_status == 0) - /* This descriptor isn't done yet, stop iteration. */ + for (pd = d; pd <= last; pd++) + if (pd->transfer_status) + break; + if (pd > last) + /* Descriptor(s) not done yet, stop iteration */ return 0; - if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS) + i = ctx->header_length; + if (i + 4 < PAGE_SIZE) { + /* Present this value as big-endian to match the receive code */ + *(__be32 *)(ctx->header + i) = cpu_to_be32( + ((u32)le16_to_cpu(pd->transfer_status) << 16) | + le16_to_cpu(pd->res_count)); + ctx->header_length += 4; + } + if (le16_to_cpu(last->control) & DESCRIPTOR_IRQ_ALWAYS) { ctx->base.callback(&ctx->base, le16_to_cpu(last->res_count), - 0, NULL, ctx->base.callback_data); - + ctx->header_length, ctx->header, + ctx->base.callback_data); + ctx->header_length = 0; + } return 1; } -- GitLab From f8d5e5a8f5be475796c7f357e43546c2d7f44540 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Nov 2009 16:00:28 +0000 Subject: [PATCH 1011/1165] ARM: PNX4008: i2c-pnx: use the same dev_id for request_irq and free_irq This allows i2c-pnx to free its interrupt handler when the module is removed or if an error occurs; using the same dev_id for both request_irq and free_irq is desirable. Signed-off-by: Russell King Acked-by: Ben Dooks --- drivers/i2c/busses/i2c-pnx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 1fca5907794..fbab6846ae6 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -650,7 +650,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev) return 0; out_irq: - free_irq(alg_data->irq, alg_data); + free_irq(alg_data->irq, i2c_pnx->adapter); out_clock: i2c_pnx->set_clock_stop(pdev); out_unmap: @@ -669,7 +669,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev) struct i2c_adapter *adap = i2c_pnx->adapter; struct i2c_pnx_algo_data *alg_data = adap->algo_data; - free_irq(alg_data->irq, alg_data); + free_irq(alg_data->irq, i2c_pnx->adapter); i2c_del_adapter(adap); i2c_pnx->set_clock_stop(pdev); iounmap((void *)alg_data->ioaddr); -- GitLab From 5d521fd36de4e61ab16a358df54c5babe153396c Mon Sep 17 00:00:00 2001 From: Amit Kumar Salecha Date: Fri, 20 Nov 2009 15:09:32 +0000 Subject: [PATCH 1012/1165] netxen: fix memory initialization Avoid resetting memory during initialization, skip this memory block during driver probe. Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_init.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index e40b914d6fa..8a0904368e0 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -544,6 +544,8 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) continue; if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */ continue; + if ((off & 0x0ff00000) == NETXEN_CRB_DDR_NET) + continue; if (off == (NETXEN_CRB_PEG_NET_1 + 0x18)) buf[i].data = 0x1020; /* skip the function enable register */ -- GitLab From a7483b0afa63e851c4438ddda8934a296851f1de Mon Sep 17 00:00:00 2001 From: Narender Kumar Date: Fri, 20 Nov 2009 15:09:33 +0000 Subject: [PATCH 1013/1165] netxen: fix promisc for NX2031. Kernel crashes, if promisc mode set without disabling rx queue. Before changing mode in NX2031 chip, wait till rx queue drains. Signed-off-by: Narender Kumar Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_hdr.h | 2 ++ drivers/net/netxen/netxen_nic_hw.c | 49 ++++++++++++++++++++++------- 2 files changed, 40 insertions(+), 11 deletions(-) diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h index 1c46da63212..17bb3818d84 100644 --- a/drivers/net/netxen/netxen_nic_hdr.h +++ b/drivers/net/netxen/netxen_nic_hdr.h @@ -545,6 +545,8 @@ enum { #define NETXEN_NIU_TEST_MUX_CTL (NETXEN_CRB_NIU + 0x00094) #define NETXEN_NIU_XG_PAUSE_CTL (NETXEN_CRB_NIU + 0x00098) #define NETXEN_NIU_XG_PAUSE_LEVEL (NETXEN_CRB_NIU + 0x000dc) +#define NETXEN_NIU_FRAME_COUNT_SELECT (NETXEN_CRB_NIU + 0x000ac) +#define NETXEN_NIU_FRAME_COUNT (NETXEN_CRB_NIU + 0x000b0) #define NETXEN_NIU_XG_SEL (NETXEN_CRB_NIU + 0x00128) #define NETXEN_NIU_GB_PAUSE_CTL (NETXEN_CRB_NIU + 0x0030c) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 3185a98b091..e2c4a0192ea 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -383,24 +383,51 @@ int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) int netxen_p2_nic_set_promisc(struct netxen_adapter *adapter, u32 mode) { - __u32 reg; + u32 mac_cfg; + u32 cnt = 0; + __u32 reg = 0x0200; u32 port = adapter->physical_port; + u16 board_type = adapter->ahw.board_type; if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; - reg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port)); - if (mode == NETXEN_NIU_PROMISC_MODE) - reg = (reg | 0x2000UL); - else - reg = (reg & ~0x2000UL); + mac_cfg = NXRD32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port)); + mac_cfg &= ~0x4; + NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg); - if (mode == NETXEN_NIU_ALLMULTI_MODE) - reg = (reg | 0x1000UL); - else - reg = (reg & ~0x1000UL); + if ((board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) || + (board_type == NETXEN_BRDTYPE_P2_SB31_10G_HMEZ)) + reg = (0x20 << port); + + NXWR32(adapter, NETXEN_NIU_FRAME_COUNT_SELECT, reg); + + mdelay(10); + + while (NXRD32(adapter, NETXEN_NIU_FRAME_COUNT) && ++cnt < 20) + mdelay(10); + + if (cnt < 20) { + + reg = NXRD32(adapter, + NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port)); + + if (mode == NETXEN_NIU_PROMISC_MODE) + reg = (reg | 0x2000UL); + else + reg = (reg & ~0x2000UL); + + if (mode == NETXEN_NIU_ALLMULTI_MODE) + reg = (reg | 0x1000UL); + else + reg = (reg & ~0x1000UL); + + NXWR32(adapter, + NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg); + } - NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_1 + (0x10000 * port), reg); + mac_cfg |= 0x4; + NXWR32(adapter, NETXEN_NIU_XGE_CONFIG_0 + (0x10000 * port), mac_cfg); return 0; } -- GitLab From 5d09e534bbb94e1fdc8e4783ac822bc172465a91 Mon Sep 17 00:00:00 2001 From: Narender Kumar Date: Fri, 20 Nov 2009 22:08:57 +0000 Subject: [PATCH 1014/1165] netxen : fix BOND_MODE_TLB/ALB mode. o Along with netdev->perm_addr, mac address will be maintained in device private structure. o Device limitation: We need to set mac address when ever interface comes up. In ALB/TAL mode, bonding driver calls set_mac for all slave with bond mac address. But bonding driver set netdev->dev_addr field to its original value, after enslaving interfaces. When ever active slave changes, it swap dev_addr of inactive slave with active. Yet it doesn't notify driver about change in netdev->dev_addr. As netxen driver need to set mac addr when ever interface comes up, it can't rely on netdev->dev_addr field. Specially in case of bonding mode ALB/TLB. Signed-off-by: Narender Kumar Signed-off-by: Amit Kumar Salecha Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic.h | 2 ++ drivers/net/netxen/netxen_nic_hw.c | 6 +++--- drivers/net/netxen/netxen_nic_main.c | 4 +++- 3 files changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 7384f59df61..e1237b80287 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -1163,6 +1163,8 @@ struct netxen_adapter { u32 int_vec_bit; u32 heartbit; + u8 mac_addr[ETH_ALEN]; + struct netxen_adapter_stats stats; struct netxen_recv_context recv_ctx; diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index e2c4a0192ea..52a3798d8d9 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -463,7 +463,7 @@ netxen_nic_enable_mcast_filter(struct netxen_adapter *adapter) { u32 val = 0; u16 port = adapter->physical_port; - u8 *addr = adapter->netdev->dev_addr; + u8 *addr = adapter->mac_addr; if (adapter->mc_enabled) return 0; @@ -492,7 +492,7 @@ netxen_nic_disable_mcast_filter(struct netxen_adapter *adapter) { u32 val = 0; u16 port = adapter->physical_port; - u8 *addr = adapter->netdev->dev_addr; + u8 *addr = adapter->mac_addr; if (!adapter->mc_enabled) return 0; @@ -687,7 +687,7 @@ void netxen_p3_nic_set_multi(struct net_device *netdev) list_splice_tail_init(&adapter->mac_list, &del_list); - nx_p3_nic_add_mac(adapter, netdev->dev_addr, &del_list); + nx_p3_nic_add_mac(adapter, adapter->mac_addr, &del_list); nx_p3_nic_add_mac(adapter, bcast_addr, &del_list); if (netdev->flags & IFF_PROMISC) { diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 0b4a56a8c8d..3bf78dbfbf0 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -437,6 +437,7 @@ netxen_read_mac_addr(struct netxen_adapter *adapter) netdev->dev_addr[i] = *(p + 5 - i); memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); + memcpy(adapter->mac_addr, netdev->dev_addr, netdev->addr_len); /* set station address */ @@ -459,6 +460,7 @@ int netxen_nic_set_mac(struct net_device *netdev, void *p) netxen_napi_disable(adapter); } + memcpy(adapter->mac_addr, addr->sa_data, netdev->addr_len); memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); adapter->macaddr_set(adapter, addr->sa_data); @@ -956,7 +958,7 @@ netxen_nic_up(struct netxen_adapter *adapter, struct net_device *netdev) return err; } if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) - adapter->macaddr_set(adapter, netdev->dev_addr); + adapter->macaddr_set(adapter, adapter->mac_addr); adapter->set_multi(netdev); adapter->set_mtu(adapter, netdev->mtu); -- GitLab From 81065518eda14ebbce1b48c98d5077b0a059d4a3 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 18 Nov 2009 10:01:00 +0100 Subject: [PATCH 1015/1165] [ARM] pxa/spitz: fix compile regression on spitz If CONFIG_AKITA is not set, spitz fails to compile. It worked ok in rc5. Fix is one more ifdef... Signed-off-by: Pavel Machek Acked-by: Stanislav Brabec Signed-off-by: Eric Miao --- arch/arm/mach-pxa/spitz.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 3da45d05174..d98023f5550 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -802,10 +802,12 @@ static void __init spitz_init(void) { spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON; +#ifdef CONFIG_MACH_BORZOI if (machine_is_borzoi()) { sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt; sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo; } +#endif platform_scoop_config = &spitz_pcmcia_config; -- GitLab From cefbf4ea629427af2fb4709bab9fe126dcddc234 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 22 Nov 2009 17:40:28 +0000 Subject: [PATCH 1016/1165] MAINTAINERS: add maintainer information for AMBA primecell drivers Signed-off-by: Russell King --- MAINTAINERS | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index c824b4d6275..e9fcac2cf1a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -512,10 +512,32 @@ W: http://www.arm.linux.org.uk/ S: Maintained F: arch/arm/ +ARM PRIMECELL AACI PL041 DRIVER +M: Russell King +S: Maintained +F: sound/arm/aaci.* + +ARM PRIMECELL CLCD PL110 DRIVER +M: Russell King +S: Maintained +F: drivers/video/amba-clcd.* + +ARM PRIMECELL KMI PL050 DRIVER +M: Russell King +S: Maintained +F: drivers/input/serio/ambakmi.* +F: include/linux/amba/kmi.h + ARM PRIMECELL MMCI PL180/1 DRIVER S: Orphan F: drivers/mmc/host/mmci.* +ARM PRIMECELL BUS SUPPORT +M: Russell King +S: Maintained +F: drivers/amba/ +F: include/linux/amba/bus.h + ARM/ADI ROADRUNNER MACHINE SUPPORT M: Lennert Buytenhek L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -- GitLab From 56adf7e8127d601b172e180b44551ce83404348f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Sun, 22 Nov 2009 12:10:10 -0700 Subject: [PATCH 1017/1165] shdma: fix initialization error handling 1/ Error handling code following a kzalloc should free the allocated data. 2/ Report an error when no platform data is detected Both problems fixed by moving the platform data check before the allocation, and allows a goto to be killed. Reported-by: Julia Lawall Acked-by: Julia Lawall Signed-off-by: Dan Williams --- drivers/dma/shdma.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index b3b065c4e5c..034ecf0ace0 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -640,17 +640,16 @@ static int __init sh_dmae_probe(struct platform_device *pdev) #endif struct sh_dmae_device *shdev; + /* get platform data */ + if (!pdev->dev.platform_data) + return -ENODEV; + shdev = kzalloc(sizeof(struct sh_dmae_device), GFP_KERNEL); if (!shdev) { dev_err(&pdev->dev, "No enough memory\n"); - err = -ENOMEM; - goto shdev_err; + return -ENOMEM; } - /* get platform data */ - if (!pdev->dev.platform_data) - goto shdev_err; - /* platform data */ memcpy(&shdev->pdata, pdev->dev.platform_data, sizeof(struct sh_dmae_pdata)); @@ -722,7 +721,6 @@ eirq_err: rst_err: kfree(shdev); -shdev_err: return err; } -- GitLab From 63edaf647607795a065e6956a79c47f500dc8447 Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Sun, 22 Nov 2009 20:40:52 -0800 Subject: [PATCH 1018/1165] Au1x00: fix crash when trying register_netdev() Andreas Lohre reported that the driver crashes when trying to register_netdev(), he sugessted to move dev->netdev_ops initialization before calling register_netdev(), it worked for him. Reported-by: Andreas Lohre Signed-off-by: Alexander Beregalov Signed-off-by: David S. Miller --- drivers/net/au1000_eth.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index ce6f1ac25df..3f4b4300f53 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1088,7 +1088,14 @@ static struct net_device * au1000_probe(int port_num) return NULL; } - if ((err = register_netdev(dev)) != 0) { + dev->base_addr = base; + dev->irq = irq; + dev->netdev_ops = &au1000_netdev_ops; + SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops); + dev->watchdog_timeo = ETH_TX_TIMEOUT; + + err = register_netdev(dev); + if (err != 0) { printk(KERN_ERR "%s: Cannot register net device, error %d\n", DRV_NAME, err); free_netdev(dev); @@ -1209,12 +1216,6 @@ static struct net_device * au1000_probe(int port_num) aup->tx_db_inuse[i] = pDB; } - dev->base_addr = base; - dev->irq = irq; - dev->netdev_ops = &au1000_netdev_ops; - SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops); - dev->watchdog_timeo = ETH_TX_TIMEOUT; - /* * The boot code uses the ethernet controller, so reset it to start * fresh. au1000_init() expects that the device is in reset state. -- GitLab From 8fa539bd911e8a7faa7cd77b5192229c9666d9b8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 23 Nov 2009 13:37:23 +0100 Subject: [PATCH 1019/1165] netfilter: xt_limit: fix invalid return code in limit_mt_check() Commit acc738fe (netfilter: xtables: avoid pointer to self) introduced an invalid return value in limit_mt_check(). Signed-off-by: Patrick McHardy --- net/netfilter/xt_limit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_limit.c b/net/netfilter/xt_limit.c index 2e8089ecd0a..2773be6a71d 100644 --- a/net/netfilter/xt_limit.c +++ b/net/netfilter/xt_limit.c @@ -112,7 +112,7 @@ static bool limit_mt_check(const struct xt_mtchk_param *par) priv = kmalloc(sizeof(*priv), GFP_KERNEL); if (priv == NULL) - return -ENOMEM; + return false; /* For SMP, we only want to use one set of state. */ r->master = priv; -- GitLab From 50b6bce59d154b5db137907a5c0ed45a4e7a3829 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 23 Nov 2009 13:11:53 +0000 Subject: [PATCH 1020/1165] ASoC: Fix suspend with active audio streams When we get a stream suspend event force the power down since otherwise the stream would remain marked as active. In future we'll probably want to make this stream-specific and add an interface to make the power down of other widgets optional in order to support leaving bypass paths active while suspending the processor. Cc: stable@kernel.org Reported-by: Joonyoung Shim Tested-by: Joonyoung Shim Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index d89f6dc0090..66d4c165f99 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -973,9 +973,19 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event) if (!w->power_check) continue; - power = w->power_check(w); - if (power) - sys_power = 1; + /* If we're suspending then pull down all the + * power. */ + switch (event) { + case SND_SOC_DAPM_STREAM_SUSPEND: + power = 0; + break; + + default: + power = w->power_check(w); + if (power) + sys_power = 1; + break; + } if (w->power == power) continue; @@ -999,8 +1009,12 @@ static int dapm_power_widgets(struct snd_soc_codec *codec, int event) case SND_SOC_DAPM_STREAM_RESUME: sys_power = 1; break; + case SND_SOC_DAPM_STREAM_SUSPEND: + sys_power = 0; + break; case SND_SOC_DAPM_STREAM_NOP: sys_power = codec->bias_level != SND_SOC_BIAS_STANDBY; + break; default: break; } -- GitLab From 87c687be055e67bc04189ce476690be73d16063e Mon Sep 17 00:00:00 2001 From: Len Brown Date: Mon, 23 Nov 2009 11:44:12 -0500 Subject: [PATCH 1021/1165] ACPI: DMI init_set_sci_en_on_resume for HP-Compaq C700 ...else ACPI thermal controls fail after resume. http://bugzilla.kernel.org/show_bug.cgi?id=13745 Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 4cc1b8116e7..5f2c379ab7b 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -430,6 +430,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, { .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Compaq Presario C700 Notebook PC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario C700 Notebook PC"), + }, + }, + { + .callback = init_set_sci_en_on_resume, .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), -- GitLab From 3336f4f08e0dad7a2b6493c80b49b685141d53ad Mon Sep 17 00:00:00 2001 From: Jean PIHET Date: Mon, 23 Nov 2009 17:03:32 +0100 Subject: [PATCH 1022/1165] ARM: 5793/1: ARM: Check put_user fail in do_signal when enable OABI_COMPAT Using OABI, the call to put_user in do_signal can fail causing the calling app to hang. The solution is to check if put_user fails and force the app to seg fault in that case. Tested with multiple sleeping apps/threads (using the nanosleep syscall) and suspend/resume. Signed-off-by: janboe Signed-off-by: Jean Pihet Signed-off-by: Russell King --- arch/arm/kernel/signal.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 2a573d4fea2..e7714f367eb 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -662,8 +662,12 @@ static void do_signal(struct pt_regs *regs, int syscall) regs->ARM_sp -= 4; usp = (u32 __user *)regs->ARM_sp; - put_user(regs->ARM_pc, usp); - regs->ARM_pc = KERN_RESTART_CODE; + if (put_user(regs->ARM_pc, usp) == 0) { + regs->ARM_pc = KERN_RESTART_CODE; + } else { + regs->ARM_sp += 4; + force_sigsegv(0, current); + } #endif } } -- GitLab From e6e3625f3b95145bfcf421285f8f7f452a5adf7e Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Sun, 22 Nov 2009 22:58:40 +0000 Subject: [PATCH 1023/1165] stmmac: fixed a compilation error when use the external timer Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/stmmac/stmmac_timer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/stmmac/stmmac_timer.c b/drivers/net/stmmac/stmmac_timer.c index b838c658207..679f61ffb1f 100644 --- a/drivers/net/stmmac/stmmac_timer.c +++ b/drivers/net/stmmac/stmmac_timer.c @@ -63,7 +63,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); if (stmmac_rtc == NULL) { - pr_error("open rtc device failed\n"); + pr_err("open rtc device failed\n"); return -ENODEV; } @@ -71,7 +71,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) /* Periodic mode is not supported */ if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) { - pr_error("set periodic failed\n"); + pr_err("set periodic failed\n"); rtc_irq_unregister(stmmac_rtc, &stmmac_task); rtc_class_close(stmmac_rtc); return -1; -- GitLab From 73cfe264c27fb50d4592ef1580486bea319443ac Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Sun, 22 Nov 2009 22:59:56 +0000 Subject: [PATCH 1024/1165] stmmac: do not fail when the timer cannot be used. If the external timer cannot be used the driver will continue to work without mitigation. Signed-off-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/stmmac/stmmac_main.c | 50 +++++++++++++++++-------------- drivers/net/stmmac/stmmac_timer.h | 1 + 2 files changed, 29 insertions(+), 22 deletions(-) diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c index c2f14dc9ba2..9542995ba66 100644 --- a/drivers/net/stmmac/stmmac_main.c +++ b/drivers/net/stmmac/stmmac_main.c @@ -416,13 +416,8 @@ static void init_dma_desc_rings(struct net_device *dev) unsigned int txsize = priv->dma_tx_size; unsigned int rxsize = priv->dma_rx_size; unsigned int bfsize = priv->dma_buf_sz; - int buff2_needed = 0; - int dis_ic = 0; + int buff2_needed = 0, dis_ic = 0; -#ifdef CONFIG_STMMAC_TIMER - /* Using Timers disable interrupts on completion for the reception */ - dis_ic = 1; -#endif /* Set the Buffer size according to the MTU; * indeed, in case of jumbo we need to bump-up the buffer sizes. */ @@ -437,6 +432,11 @@ static void init_dma_desc_rings(struct net_device *dev) else bfsize = DMA_BUFFER_SIZE; +#ifdef CONFIG_STMMAC_TIMER + /* Disable interrupts on completion for the reception if timer is on */ + if (likely(priv->tm->enable)) + dis_ic = 1; +#endif /* If the MTU exceeds 8k so use the second buffer in the chain */ if (bfsize >= BUF_SIZE_8KiB) buff2_needed = 1; @@ -809,20 +809,22 @@ static void stmmac_tx(struct stmmac_priv *priv) static inline void stmmac_enable_irq(struct stmmac_priv *priv) { -#ifndef CONFIG_STMMAC_TIMER - writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); -#else - priv->tm->timer_start(tmrate); +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_start(tmrate); + else #endif + writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA); } static inline void stmmac_disable_irq(struct stmmac_priv *priv) { -#ifndef CONFIG_STMMAC_TIMER - writel(0, priv->dev->base_addr + DMA_INTR_ENA); -#else - priv->tm->timer_stop(); +#ifdef CONFIG_STMMAC_TIMER + if (likely(priv->tm->enable)) + priv->tm->timer_stop(); + else #endif + writel(0, priv->dev->base_addr + DMA_INTR_ENA); } static int stmmac_has_work(struct stmmac_priv *priv) @@ -1031,22 +1033,23 @@ static int stmmac_open(struct net_device *dev) } #ifdef CONFIG_STMMAC_TIMER - priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); + priv->tm = kzalloc(sizeof(struct stmmac_timer *), GFP_KERNEL); if (unlikely(priv->tm == NULL)) { pr_err("%s: ERROR: timer memory alloc failed \n", __func__); return -ENOMEM; } priv->tm->freq = tmrate; - /* Test if the HW timer can be actually used. - * In case of failure continue with no timer. */ + /* Test if the external timer can be actually used. + * In case of failure continue without timer. */ if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) { - pr_warning("stmmaceth: cannot attach the HW timer\n"); + pr_warning("stmmaceth: cannot attach the external timer.\n"); tmrate = 0; priv->tm->freq = 0; priv->tm->timer_start = stmmac_no_timer_started; priv->tm->timer_stop = stmmac_no_timer_stopped; - } + } else + priv->tm->enable = 1; #endif /* Create and initialize the TX/RX descriptors chains. */ @@ -1322,9 +1325,11 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) /* Interrupt on completition only for the latest segment */ priv->mac_type->ops->close_tx_desc(desc); + #ifdef CONFIG_STMMAC_TIMER - /* Clean IC while using timers */ - priv->mac_type->ops->clear_tx_ic(desc); + /* Clean IC while using timer */ + if (likely(priv->tm->enable)) + priv->mac_type->ops->clear_tx_ic(desc); #endif /* To avoid raise condition */ priv->mac_type->ops->set_tx_owner(first); @@ -2028,7 +2033,8 @@ static int stmmac_suspend(struct platform_device *pdev, pm_message_t state) #ifdef CONFIG_STMMAC_TIMER priv->tm->timer_stop(); - dis_ic = 1; + if (likely(priv->tm->enable)) + dis_ic = 1; #endif napi_disable(&priv->napi); diff --git a/drivers/net/stmmac/stmmac_timer.h b/drivers/net/stmmac/stmmac_timer.h index f795cae3372..6863590d184 100644 --- a/drivers/net/stmmac/stmmac_timer.h +++ b/drivers/net/stmmac/stmmac_timer.h @@ -26,6 +26,7 @@ struct stmmac_timer { void (*timer_start) (unsigned int new_freq); void (*timer_stop) (void); unsigned int freq; + unsigned int enable; }; /* Open the HW timer device and return 0 in case of success */ -- GitLab From 593f63b0be70762bd4354bde147b8e169c5a2f57 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 23 Nov 2009 01:44:37 +0000 Subject: [PATCH 1025/1165] pktgen: Fix device name compares Commit e6fce5b916cd7f7f7 (pktgen: multiqueue etc.) tried to relax the pktgen restriction of one device per kernel thread, adding a '@' tag to device names. Problem is we dont perform check on full pktgen device name. This allows adding many time same 'device' to pktgen thread pgset "add_device eth0@0" one session later : pgset "add_device eth0@0" (This doesnt find previous device) This consumes ~1.5 MBytes of vmalloc memory per round and also triggers this warning : [ 673.186380] proc_dir_entry 'pktgen/eth0@0' already registered [ 673.186383] Modules linked in: pktgen ixgbe ehci_hcd psmouse mdio mousedev evdev [last unloaded: pktgen] [ 673.186406] Pid: 6219, comm: bash Tainted: G W 2.6.32-rc7-03302-g41cec6f-dirty #16 [ 673.186410] Call Trace: [ 673.186417] [] warn_slowpath_common+0x7b/0xc0 [ 673.186422] [] warn_slowpath_fmt+0x41/0x50 [ 673.186426] [] proc_register+0x109/0x210 [ 673.186433] [] ? apic_timer_interrupt+0xe/0x20 [ 673.186438] [] proc_create_data+0x75/0xd0 [ 673.186444] [] pktgen_thread_write+0x568/0x640 [pktgen] [ 673.186449] [] ? pktgen_thread_write+0x0/0x640 [pktgen] [ 673.186453] [] proc_reg_write+0x84/0xc0 [ 673.186458] [] vfs_write+0xb8/0x180 [ 673.186463] [] sys_write+0x51/0x90 [ 673.186468] [] system_call_fastpath+0x16/0x1b [ 673.186470] ---[ end trace ccbb991b0a8d994d ]--- Solution to this problem is to use a odevname field (includes @ tag and suffix), instead of using netdevice name. Signed-off-by: Eric Dumazet Signed-off-by: Robert Olsson Signed-off-by: David S. Miller --- net/core/pktgen.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 6eb8d47cbf3..54c634fab6c 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -363,6 +363,7 @@ struct pktgen_dev { * device name (not when the inject is * started as it used to do.) */ + char odevname[32]; struct flow_state *flows; unsigned cflows; /* Concurrent flows (config) */ unsigned lflow; /* Flow length (config) */ @@ -528,7 +529,7 @@ static int pktgen_if_show(struct seq_file *seq, void *v) seq_printf(seq, " frags: %d delay: %llu clone_skb: %d ifname: %s\n", pkt_dev->nfrags, (unsigned long long) pkt_dev->delay, - pkt_dev->clone_skb, pkt_dev->odev->name); + pkt_dev->clone_skb, pkt_dev->odevname); seq_printf(seq, " flows: %u flowlen: %u\n", pkt_dev->cflows, pkt_dev->lflow); @@ -1688,13 +1689,13 @@ static int pktgen_thread_show(struct seq_file *seq, void *v) if_lock(t); list_for_each_entry(pkt_dev, &t->if_list, list) if (pkt_dev->running) - seq_printf(seq, "%s ", pkt_dev->odev->name); + seq_printf(seq, "%s ", pkt_dev->odevname); seq_printf(seq, "\nStopped: "); list_for_each_entry(pkt_dev, &t->if_list, list) if (!pkt_dev->running) - seq_printf(seq, "%s ", pkt_dev->odev->name); + seq_printf(seq, "%s ", pkt_dev->odevname); if (t->result[0]) seq_printf(seq, "\nResult: %s\n", t->result); @@ -1994,7 +1995,7 @@ static void pktgen_setup_inject(struct pktgen_dev *pkt_dev) "queue_map_min (zero-based) (%d) exceeds valid range " "[0 - %d] for (%d) queues on %s, resetting\n", pkt_dev->queue_map_min, (ntxq ?: 1) - 1, ntxq, - pkt_dev->odev->name); + pkt_dev->odevname); pkt_dev->queue_map_min = ntxq - 1; } if (pkt_dev->queue_map_max >= ntxq) { @@ -2002,7 +2003,7 @@ static void pktgen_setup_inject(struct pktgen_dev *pkt_dev) "queue_map_max (zero-based) (%d) exceeds valid range " "[0 - %d] for (%d) queues on %s, resetting\n", pkt_dev->queue_map_max, (ntxq ?: 1) - 1, ntxq, - pkt_dev->odev->name); + pkt_dev->odevname); pkt_dev->queue_map_max = ntxq - 1; } @@ -3262,7 +3263,7 @@ static int pktgen_stop_device(struct pktgen_dev *pkt_dev) if (!pkt_dev->running) { printk(KERN_WARNING "pktgen: interface: %s is already " - "stopped\n", pkt_dev->odev->name); + "stopped\n", pkt_dev->odevname); return -EINVAL; } @@ -3464,7 +3465,7 @@ static void pktgen_xmit(struct pktgen_dev *pkt_dev) default: /* Drivers are not supposed to return other values! */ if (net_ratelimit()) pr_info("pktgen: %s xmit error: %d\n", - odev->name, ret); + pkt_dev->odevname, ret); pkt_dev->errors++; /* fallthru */ case NETDEV_TX_LOCKED: @@ -3572,7 +3573,7 @@ static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t, if_lock(t); list_for_each_entry(p, &t->if_list, list) - if (strncmp(p->odev->name, ifname, IFNAMSIZ) == 0) { + if (strncmp(p->odevname, ifname, IFNAMSIZ) == 0) { pkt_dev = p; break; } @@ -3628,6 +3629,7 @@ static int pktgen_add_device(struct pktgen_thread *t, const char *ifname) if (!pkt_dev) return -ENOMEM; + strcpy(pkt_dev->odevname, ifname); pkt_dev->flows = vmalloc(MAX_CFLOWS * sizeof(struct flow_state)); if (pkt_dev->flows == NULL) { kfree(pkt_dev); -- GitLab From 9ce673d5e919966efc1ef5adf20248e6ecc62724 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Antti=20Kaijanm=C3=A4ki?= Date: Mon, 23 Nov 2009 10:54:24 -0800 Subject: [PATCH 1026/1165] hso: fix debug routines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Antti Kaijanmäki Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index fa4e58196c2..746839bb89f 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -378,7 +378,7 @@ static void dbg_dump(int line_count, const char *func_name, unsigned char *buf, } #define DUMP(buf_, len_) \ - dbg_dump(__LINE__, __func__, buf_, len_) + dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_) #define DUMP1(buf_, len_) \ do { \ @@ -1527,7 +1527,7 @@ static void tiocmget_intr_callback(struct urb *urb) dev_warn(&usb->dev, "hso received invalid serial state notification\n"); DUMP(serial_state_notification, - sizeof(hso_serial_state_notifation)) + sizeof(struct hso_serial_state_notification)); } else { UART_state_bitmap = le16_to_cpu(serial_state_notification-> -- GitLab From dcfcb256cc23c4436691b0fe677275306699d6a1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Antti=20Kaijanm=C3=A4ki?= Date: Mon, 23 Nov 2009 10:54:47 -0800 Subject: [PATCH 1027/1165] hso: fix soft-lockup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix soft-lockup in hso.c which is triggered on SMP machine when modem is removed while file descriptor(s) under /dev are still open: old version called kref_put() too early which resulted in destroying hso_serial and hso_device objects which were still used later on. Signed-off-by: Antti Kaijanmäki Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 746839bb89f..43bc3fcc0d8 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1363,7 +1363,7 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) /* reset the rts and dtr */ /* do the actual close */ serial->open_count--; - kref_put(&serial->parent->ref, hso_serial_ref_free); + if (serial->open_count <= 0) { serial->open_count = 0; spin_lock_irq(&serial->serial_lock); @@ -1383,6 +1383,8 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp) usb_autopm_put_interface(serial->parent->interface); mutex_unlock(&serial->parent->mutex); + + kref_put(&serial->parent->ref, hso_serial_ref_free); } /* close the requested serial port */ -- GitLab From 9326e3614d72e40ea8d910fed829ec72c9b70798 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 1 Oct 2009 16:47:39 -0700 Subject: [PATCH 1028/1165] MIPS: Octeon: Fix compile error in drivers/staging/octeon/ethernet-mdio.c Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/ethernet-mdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c index 42230e62a22..31a58e50892 100644 --- a/drivers/staging/octeon/ethernet-mdio.c +++ b/drivers/staging/octeon/ethernet-mdio.c @@ -170,7 +170,7 @@ static u32 cvm_oct_get_link(struct net_device *dev) return ret; } -struct const ethtool_ops cvm_oct_ethtool_ops = { +const struct ethtool_ops cvm_oct_ethtool_ops = { .get_drvinfo = cvm_oct_get_drvinfo, .get_settings = cvm_oct_get_settings, .set_settings = cvm_oct_set_settings, -- GitLab From aabb89d6fa4c70d77fe180ee794f857decde4010 Mon Sep 17 00:00:00 2001 From: David Daney Date: Thu, 3 Sep 2009 16:10:47 -0700 Subject: [PATCH 1029/1165] Staging: Octeon: Use symbolic values for irq numbers. In addition to being magic numbers, the irq number passed to free_irq is incorrect. We need to use the correct symbolic value instead. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/ethernet-spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c index 66190b0cb68..00dc0f4bad1 100644 --- a/drivers/staging/octeon/ethernet-spi.c +++ b/drivers/staging/octeon/ethernet-spi.c @@ -317,6 +317,6 @@ void cvm_oct_spi_uninit(struct net_device *dev) cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), 0); cvmx_write_csr(CVMX_STXX_INT_MSK(interface), 0); } - free_irq(8 + 46, &number_spi_ports); + free_irq(OCTEON_IRQ_RML, &number_spi_ports); } } -- GitLab From 13c5939e42dc11da61e00fef7f6cca2a6824a59f Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 12 Oct 2009 12:04:32 -0700 Subject: [PATCH 1030/1165] Staging: octeon-ethernet: Assign proper MAC addresses. Allocate MAC addresses using the same method as the bootloader. This avoids changing the MAC between bootloader and kernel operation as well as avoiding duplicates and use of addresses outside of the assigned range. Signed-off-by: David Daney Signed-off-by: Ralf Baechle --- drivers/staging/octeon/ethernet.c | 53 ++++++++++++++++++++++++------- 1 file changed, 41 insertions(+), 12 deletions(-) diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index b8479517dce..492c5029992 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -111,6 +111,16 @@ MODULE_PARM_DESC(disable_core_queueing, "\n" "\tallows packets to be sent without lock contention in the packet\n" "\tscheduler resulting in some cases in improved throughput.\n"); + +/* + * The offset from mac_addr_base that should be used for the next port + * that is configured. By convention, if any mgmt ports exist on the + * chip, they get the first mac addresses, The ports controlled by + * this driver are numbered sequencially following any mgmt addresses + * that may exist. + */ +static unsigned int cvm_oct_mac_addr_offset; + /** * Periodic timer to check auto negotiation */ @@ -474,16 +484,30 @@ static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr) */ int cvm_oct_common_init(struct net_device *dev) { - static int count; - char mac[8] = { 0x00, 0x00, - octeon_bootinfo->mac_addr_base[0], - octeon_bootinfo->mac_addr_base[1], - octeon_bootinfo->mac_addr_base[2], - octeon_bootinfo->mac_addr_base[3], - octeon_bootinfo->mac_addr_base[4], - octeon_bootinfo->mac_addr_base[5] + count - }; struct octeon_ethernet *priv = netdev_priv(dev); + struct sockaddr sa; + u64 mac = ((u64)(octeon_bootinfo->mac_addr_base[0] & 0xff) << 40) | + ((u64)(octeon_bootinfo->mac_addr_base[1] & 0xff) << 32) | + ((u64)(octeon_bootinfo->mac_addr_base[2] & 0xff) << 24) | + ((u64)(octeon_bootinfo->mac_addr_base[3] & 0xff) << 16) | + ((u64)(octeon_bootinfo->mac_addr_base[4] & 0xff) << 8) | + (u64)(octeon_bootinfo->mac_addr_base[5] & 0xff); + + mac += cvm_oct_mac_addr_offset; + sa.sa_data[0] = (mac >> 40) & 0xff; + sa.sa_data[1] = (mac >> 32) & 0xff; + sa.sa_data[2] = (mac >> 24) & 0xff; + sa.sa_data[3] = (mac >> 16) & 0xff; + sa.sa_data[4] = (mac >> 8) & 0xff; + sa.sa_data[5] = mac & 0xff; + + if (cvm_oct_mac_addr_offset >= octeon_bootinfo->mac_addr_count) + printk(KERN_DEBUG "%s: Using MAC outside of the assigned range:" + " %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name, + sa.sa_data[0] & 0xff, sa.sa_data[1] & 0xff, + sa.sa_data[2] & 0xff, sa.sa_data[3] & 0xff, + sa.sa_data[4] & 0xff, sa.sa_data[5] & 0xff); + cvm_oct_mac_addr_offset++; /* * Force the interface to use the POW send if always_use_pow @@ -496,14 +520,12 @@ int cvm_oct_common_init(struct net_device *dev) if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM) dev->features |= NETIF_F_IP_CSUM; - count++; - /* We do our own locking, Linux doesn't need to */ dev->features |= NETIF_F_LLTX; SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops); cvm_oct_mdio_setup_device(dev); - dev->netdev_ops->ndo_set_mac_address(dev, mac); + dev->netdev_ops->ndo_set_mac_address(dev, &sa); dev->netdev_ops->ndo_change_mtu(dev, dev->mtu); /* @@ -620,6 +642,13 @@ static int __init cvm_oct_init_module(void) pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION); + if (OCTEON_IS_MODEL(OCTEON_CN52XX)) + cvm_oct_mac_addr_offset = 2; /* First two are the mgmt ports. */ + else if (OCTEON_IS_MODEL(OCTEON_CN56XX)) + cvm_oct_mac_addr_offset = 1; /* First one is the mgmt port. */ + else + cvm_oct_mac_addr_offset = 0; + cvm_oct_proc_initialize(); cvm_oct_rx_initialize(); cvm_oct_configure_common_hw(); -- GitLab From 54ab040d24904d1fa2c0a6a27936b7c56a4efb24 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 23 Nov 2009 16:15:19 -0500 Subject: [PATCH 1031/1165] ath9k: set ps_default as false Copied from original one-line patch here: http://bugzilla.kernel.org/show_bug.cgi?id=14267#c26 Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 52bed89063d..43d2be9867f 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1555,6 +1555,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) BIT(NL80211_IFTYPE_ADHOC) | BIT(NL80211_IFTYPE_MESH_POINT); + hw->wiphy->ps_default = false; + hw->queues = 4; hw->max_rates = 4; hw->channel_change_time = 5000; -- GitLab From 45ba564d765d6165330e9bb14a197bdd348c114d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Nov 2009 11:27:30 +0100 Subject: [PATCH 1032/1165] rfkill: fix miscdev ops The /dev/rfkill ops don't refer to the module, so it is possible to unload the module while file descriptors are open. Fix this oversight. Reported-by: Maxim Levitsky Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/rfkill/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/rfkill/core.c b/net/rfkill/core.c index dbeaf298382..7cb57ff6baf 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -1188,6 +1188,7 @@ static long rfkill_fop_ioctl(struct file *file, unsigned int cmd, #endif static const struct file_operations rfkill_fops = { + .owner = THIS_MODULE, .open = rfkill_fop_open, .read = rfkill_fop_read, .write = rfkill_fop_write, -- GitLab From 8c2acc53fd7987493f11640e266cf7130591e764 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Mon, 23 Nov 2009 14:18:53 -0800 Subject: [PATCH 1033/1165] macvlan: fix gso_max_size setting gso_max_size must be set based on the value of the underlying device to support devices not using the full 64k. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 3aabfd9dd21..2490aa39804 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -360,6 +360,7 @@ static int macvlan_init(struct net_device *dev) dev->state = (dev->state & ~MACVLAN_STATE_MASK) | (lowerdev->state & MACVLAN_STATE_MASK); dev->features = lowerdev->features & MACVLAN_FEATURES; + dev->gso_max_size = lowerdev->gso_max_size; dev->iflink = lowerdev->ifindex; dev->hard_header_len = lowerdev->hard_header_len; @@ -596,6 +597,7 @@ static int macvlan_device_event(struct notifier_block *unused, case NETDEV_FEAT_CHANGE: list_for_each_entry(vlan, &port->vlans, list) { vlan->dev->features = dev->features & MACVLAN_FEATURES; + vlan->dev->gso_max_size = dev->gso_max_size; netdev_features_change(vlan->dev); } break; -- GitLab From bffbc94a4d2c1769c3826fceddd2dbb75e72c80b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 23 Nov 2009 16:38:56 -0800 Subject: [PATCH 1034/1165] sparc64: Fix definition of VMEMMAP_SIZE. This was the cause of various boot failures on V480, V880, etc. systems. Kernel image memory was being overwritten because the vmemmap[] array was being sized to small. So if you had physical memory addresses past a certain point, the early bootup would spam all over variables in the kernel data section. The vmemmap mappings map page structs, not page struct pointers. And that was the key thinko in the macro definition. This was fixable thanks to the help, reports, and tireless patience of Hermann Lauer. Reported-by: Hermann Lauer Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sparc/mm/init_64.h b/arch/sparc/mm/init_64.h index c2f772dbd55..77d1b313e34 100644 --- a/arch/sparc/mm/init_64.h +++ b/arch/sparc/mm/init_64.h @@ -45,7 +45,7 @@ extern void free_initmem(void); #define VMEMMAP_ALIGN(x) (((x)+VMEMMAP_CHUNK-1UL)&VMEMMAP_CHUNK_MASK) #define VMEMMAP_SIZE ((((1UL << MAX_PHYSADDR_BITS) >> PAGE_SHIFT) * \ - sizeof(struct page *)) >> VMEMMAP_CHUNK_SHIFT) + sizeof(struct page)) >> VMEMMAP_CHUNK_SHIFT) extern unsigned long vmemmap_table[VMEMMAP_SIZE]; #endif -- GitLab From 0ebf17174b4bdd99ab81c476714c91ee335fdcbf Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 5 Nov 2009 15:39:10 +1000 Subject: [PATCH 1035/1165] drm/radeon/kms: resume AGP by calling init. AGP resume was broken since we moved to the new init path, because we never re-enabled AGP on these systems at resume time. This patch just calls the AGP resume call which just does the reinit at resume time like the old path did. Since AGP is pretty much gpu independant I did it outside the gpu specific code. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_agp.c | 12 ++++++++++++ drivers/gpu/drm/radeon/radeon_device.c | 2 ++ 3 files changed, 15 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 757f5cd3774..224506a2f7b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -519,6 +519,7 @@ typedef int (*radeon_packet3_check_t)(struct radeon_cs_parser *p, * AGP */ int radeon_agp_init(struct radeon_device *rdev); +void radeon_agp_resume(struct radeon_device *rdev); void radeon_agp_fini(struct radeon_device *rdev); diff --git a/drivers/gpu/drm/radeon/radeon_agp.c b/drivers/gpu/drm/radeon/radeon_agp.c index 23ea9955ac5..54bf49a6d67 100644 --- a/drivers/gpu/drm/radeon/radeon_agp.c +++ b/drivers/gpu/drm/radeon/radeon_agp.c @@ -237,6 +237,18 @@ int radeon_agp_init(struct radeon_device *rdev) #endif } +void radeon_agp_resume(struct radeon_device *rdev) +{ +#if __OS_HAS_AGP + int r; + if (rdev->flags & RADEON_IS_AGP) { + r = radeon_agp_init(rdev); + if (r) + dev_warn(rdev->dev, "radeon AGP reinit failed\n"); + } +#endif +} + void radeon_agp_fini(struct radeon_device *rdev) { #if __OS_HAS_AGP diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index e3f9edfa40f..41bb76fbe73 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -688,6 +688,8 @@ int radeon_resume_kms(struct drm_device *dev) return -1; } pci_set_master(dev->pdev); + /* resume AGP if in use */ + radeon_agp_resume(rdev); radeon_resume(rdev); radeon_restore_bios_scratch_regs(rdev); fb_set_suspend(rdev->fbdev_info, 0); -- GitLab From 7064fef56369c9e2c6e35ff6d6b4b63d42a859ce Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 5 Nov 2009 10:12:54 -0800 Subject: [PATCH 1036/1165] drm: work around EDIDs with bad htotal/vtotal values We did this on the userspace side, but we need a similar fix for the kernel. Fixes LP #460664. Signed-off-by: Jesse Barnes Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index cea665d86dd..b54ba63d506 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -662,6 +662,12 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, return NULL; } + /* Some EDIDs have bogus h/vtotal values */ + if (mode->hsync_end > mode->htotal) + mode->htotal = mode->hsync_end + 1; + if (mode->vsync_end > mode->vtotal) + mode->vtotal = mode->vsync_end + 1; + drm_mode_set_name(mode); if (pt->misc & DRM_EDID_PT_INTERLACED) -- GitLab From ef63062716415d6e271815872b6c6654ffa9ac26 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 12 Nov 2009 09:37:39 +1000 Subject: [PATCH 1037/1165] drm/radeon/kms: fix handling of d1/d2 vga An rv515 laptop I got wouldn't startup with a montior plugged in, found the proper bug hopefully with us not turning off D2VGA here when we should. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rv515.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 7935f793bf6..ba68c9fe90a 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -137,8 +137,6 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev) void rv515_vga_render_disable(struct radeon_device *rdev) { - WREG32(R_000330_D1VGA_CONTROL, 0); - WREG32(R_000338_D2VGA_CONTROL, 0); WREG32(R_000300_VGA_RENDER_CONTROL, RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL); } @@ -382,7 +380,6 @@ void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save) save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL); /* Stop all video */ - WREG32(R_000330_D1VGA_CONTROL, 0); WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); WREG32(R_000300_VGA_RENDER_CONTROL, 0); WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1); @@ -391,6 +388,8 @@ void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save) WREG32(R_006880_D2CRTC_CONTROL, 0); WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0); WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); + WREG32(R_000330_D1VGA_CONTROL, 0); + WREG32(R_000338_D2VGA_CONTROL, 0); } void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save) @@ -404,14 +403,14 @@ void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save) WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control); mdelay(1); /* Restore video state */ + WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control); + WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control); WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1); WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1); WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control); WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control); WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0); WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0); - WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control); - WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control); WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control); } -- GitLab From 23115b0592bde5da249fcbdad7714c1f96a8e5f5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 12 Nov 2009 15:53:44 +1000 Subject: [PATCH 1038/1165] drm/radeon/kms: read back register before writing in IIO. This fixes RH bugzilla #527874. On resume the atom posting wasn't working, however vbe posting was going fine, after 2 weeks over irc, and 8 hrs with the hardware, I tracked it down to the memory device table and it access the MC registers via IIO, it appears the rv515 atom iio table might not be fully functional, so adding a readback before doing a write either provides enough delay to make things resume correctly. Thanks to Peng Huang at Red Hat for coming to Brisbane. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/atom.c b/drivers/gpu/drm/radeon/atom.c index 901befe03da..d67c42555ab 100644 --- a/drivers/gpu/drm/radeon/atom.c +++ b/drivers/gpu/drm/radeon/atom.c @@ -107,6 +107,7 @@ static uint32_t atom_iio_execute(struct atom_context *ctx, int base, base += 3; break; case ATOM_IIO_WRITE: + (void)ctx->card->reg_read(ctx->card, CU16(base + 1)); ctx->card->reg_write(ctx->card, CU16(base + 1), temp); base += 3; break; -- GitLab From 0beb81ab45c67de4b3aa85faad604cff8ed133a8 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 13 Nov 2009 20:56:35 +0100 Subject: [PATCH 1039/1165] drm/radeon/kms: Disable TV load detect on RS400,RC410,RS480 RS400,RC410,RS480 chipset seems to report a lot of false positive with load detect on TV output. We haven't yet found a way to make load detect reliable on those chipset, thus just disable it for TV output. Would avoid user to experience phantom screen because X believe there is a monitor connected to the TV output. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index fce4c4087fd..55fecfc1f19 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -1149,6 +1149,13 @@ radeon_add_legacy_connector(struct drm_device *dev, if (ret) goto failed; radeon_connector->dac_load_detect = true; + /* RS400,RC410,RS480 chipset seems to report a lot + * of false positive on load detect, we haven't yet + * found a way to make load detect reliable on those + * chipset, thus just disable it for TV. + */ + if (rdev->family == CHIP_RS400 || rdev->family == CHIP_RS480) + radeon_connector->dac_load_detect = false; drm_connector_attach_property(&radeon_connector->base, rdev->mode_info.load_detect_property, 1); -- GitLab From a698cf34ea867efef12fc29dd63d443f0c71a53c Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Fri, 13 Nov 2009 20:56:58 +0100 Subject: [PATCH 1040/1165] drm: mm always protect change to unused_nodes with unused_lock spinlock unused_nodes modification needs to be protected by unused_lock spinlock. Here is an example of an usage where there is no such protection without this patch. Process 1: 1-drm_mm_pre_get(this function modify unused_nodes list) 2-spin_lock(spinlock protecting mm struct) 3-drm_mm_put_block(this function might modify unused_nodes list but doesn't protect modification with unused_lock) 4-spin_unlock(spinlock protecting mm struct) Process2: 1-drm_mm_pre_get(this function modify unused_nodes list) At this point Process1 & Process2 might both be doing modification to unused_nodes list. This patch add unused_lock protection into drm_mm_put_block to avoid such issue. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_mm.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c index c861d80fd77..97dc5a4f0de 100644 --- a/drivers/gpu/drm/drm_mm.c +++ b/drivers/gpu/drm/drm_mm.c @@ -103,6 +103,11 @@ static struct drm_mm_node *drm_mm_kmalloc(struct drm_mm *mm, int atomic) return child; } +/* drm_mm_pre_get() - pre allocate drm_mm_node structure + * drm_mm: memory manager struct we are pre-allocating for + * + * Returns 0 on success or -ENOMEM if allocation fails. + */ int drm_mm_pre_get(struct drm_mm *mm) { struct drm_mm_node *node; @@ -253,12 +258,14 @@ void drm_mm_put_block(struct drm_mm_node *cur) prev_node->size += next_node->size; list_del(&next_node->ml_entry); list_del(&next_node->fl_entry); + spin_lock(&mm->unused_lock); if (mm->num_unused < MM_UNUSED_TARGET) { list_add(&next_node->fl_entry, &mm->unused_nodes); ++mm->num_unused; } else kfree(next_node); + spin_unlock(&mm->unused_lock); } else { next_node->size += cur->size; next_node->start = cur->start; @@ -271,11 +278,13 @@ void drm_mm_put_block(struct drm_mm_node *cur) list_add(&cur->fl_entry, &mm->fl_entry); } else { list_del(&cur->ml_entry); + spin_lock(&mm->unused_lock); if (mm->num_unused < MM_UNUSED_TARGET) { list_add(&cur->fl_entry, &mm->unused_nodes); ++mm->num_unused; } else kfree(cur); + spin_unlock(&mm->unused_lock); } } -- GitLab From f82f5f3ac4de6c6b872fcbb3dec97f368e78ff58 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Thu, 12 Nov 2009 14:13:53 +0100 Subject: [PATCH 1041/1165] drm/radeon/kms: Report vga connector is connected according to ddc_probe On broken EDID we were reporting vga connector to be disconnected even if ddc probe did found a monitor. This patch report that the connector is connected on such case. This allow drm to add a fail safe mode (800x600 at the time of this patch) thus user can boot and later add a mode which match its monitor capabilities. Signed-off-by: Jerome Glisse Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 55fecfc1f19..29763ceae3a 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -566,8 +566,9 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connect radeon_i2c_do_lock(radeon_connector, 0); if (!radeon_connector->edid) { - DRM_ERROR("DDC responded but not EDID found for %s\n", - drm_get_connector_name(connector)); + DRM_ERROR("%s: probed a monitor but no|invalid EDID\n", + drm_get_connector_name(connector)); + ret = connector_status_connected; } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); @@ -720,8 +721,8 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect radeon_i2c_do_lock(radeon_connector, 0); if (!radeon_connector->edid) { - DRM_ERROR("DDC responded but not EDID found for %s\n", - drm_get_connector_name(connector)); + DRM_ERROR("%s: probed a monitor but no|invalid EDID\n", + drm_get_connector_name(connector)); } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); -- GitLab From 79cc304f3e2fda202242036326afb2aeca486156 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Tue, 17 Nov 2009 14:08:54 -0800 Subject: [PATCH 1042/1165] drm: make sure page protections are updated after changing vm_flags Some architectures compute ->vm_page_prot depending on ->vm_flags, so we need to update the protections after adjusting the flags. AFAIK this only affects running X under Xen; without this patch you get lots of coloured blobs on the screen, or maybe a complete lockup. Or anything really. But that still depends on lots of out-of-tree stuff, so I don't think there are any consequences for anyone else. But it is wrong in principle. Reported-by: Jan Beulich Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Andrew Morton Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index 80391995bde..e9dbb481c46 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -552,7 +552,7 @@ int drm_gem_mmap(struct file *filp, struct vm_area_struct *vma) vma->vm_flags |= VM_RESERVED | VM_IO | VM_PFNMAP | VM_DONTEXPAND; vma->vm_ops = obj->dev->driver->gem_vm_ops; vma->vm_private_data = map->handle; - vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); + vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); /* Take a ref for this mapping of the object, so that the fault * handler can dereference the mmap offset's pointer to the object. -- GitLab From 5349ef3127c77075ff70b2014f17ae0fbcaaf199 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 4 Nov 2009 09:42:52 +0100 Subject: [PATCH 1043/1165] drm/fb: fix FBIOGET/PUT_VSCREENINFO pixel clock handling When the framebuffer driver does not publish detailed timing information for the current video mode, the correct value for the pixclock field is zero, not -1. Since pixclock is actually unsigned, the value -1 would be interpreted as 4294967295 picoseconds (i.e., about 4 milliseconds) by register_framebuffer() and userspace programs. This patch allows X.org's fbdev driver to work. Signed-off-by: Clemens Ladisch Tested-by: Paulius Zaleckas Cc: stable@kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index dc8e374a0b5..65ef011fa8b 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -599,7 +599,7 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var, struct drm_framebuffer *fb = fb_helper->fb; int depth; - if (var->pixclock == -1 || !var->pixclock) + if (var->pixclock != 0) return -EINVAL; /* Need to resize the fb object !!! */ @@ -691,7 +691,7 @@ int drm_fb_helper_set_par(struct fb_info *info) int ret; int i; - if (var->pixclock != -1) { + if (var->pixclock != 0) { DRM_ERROR("PIXEL CLCOK SET\n"); return -EINVAL; } @@ -904,7 +904,7 @@ int drm_fb_helper_single_fb_probe(struct drm_device *dev, fb_helper->fb = fb; if (new_fb) { - info->var.pixclock = -1; + info->var.pixclock = 0; if (register_framebuffer(info) < 0) return -EINVAL; } else { -- GitLab From d77b81974521c82fa6fda38dfff1b491dcc62a32 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Tue, 24 Nov 2009 16:53:00 +0100 Subject: [PATCH 1044/1165] [CPUFREQ] Enable ACPI PDC handshake for VIA/Centaur CPUs In commit 0de51088e6a82bc8413d3ca9e28bbca2788b5b53, we introduced the use of acpi-cpufreq on VIA/Centaur CPU's by removing a vendor check for VENDOR_INTEL. However, as it turns out, at least the Nano CPU's also need the PDC (processor driver capabilities) handshake in order to activate the methods required for acpi-cpufreq. Since arch_acpi_processor_init_pdc() contains another vendor check for Intel, the PDC is not initialized on VIA CPU's. The resulting behavior of a current mainline kernel on such systems is: acpi-cpufreq loads and it indicates CPU frequency changes. However, the CPU stays at a single frequency This trivial patch ensures that init_intel_pdc() is called on Intel and VIA/Centaur CPU's alike. Signed-off-by: Harald Welte Signed-off-by: Dave Jones --- arch/x86/kernel/acpi/processor.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c index d296f4a195c..d85d1b2432b 100644 --- a/arch/x86/kernel/acpi/processor.c +++ b/arch/x86/kernel/acpi/processor.c @@ -79,7 +79,8 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) struct cpuinfo_x86 *c = &cpu_data(pr->id); pr->pdc = NULL; - if (c->x86_vendor == X86_VENDOR_INTEL) + if (c->x86_vendor == X86_VENDOR_INTEL || + c->x86_vendor == X86_VENDOR_CENTAUR) init_intel_pdc(pr, c); return; -- GitLab From 4e68e188411ea98e40309700cf0c89ad4469ac1d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 13:56:39 -0800 Subject: [PATCH 1045/1165] sunsab: Do not set sunsab_reg.cons right before registering minors. Other Sun serial drivers do not do this, and if we keep it this way it ends up registering all serial devices as consoles rather than just the one which we explicitly register via sunserial_console_match() which uses add_preferred_console(). Signed-off-by: David S. Miller --- drivers/serial/sunsab.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index d1ad3412863..8755de8adbc 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -1116,7 +1116,6 @@ static int __init sunsab_init(void) if (!sunsab_ports) return -ENOMEM; - sunsab_reg.cons = SUNSAB_CONSOLE(); err = sunserial_register_minors(&sunsab_reg, num_channels); if (err) { kfree(sunsab_ports); -- GitLab From 8301d386afc55c877bafe2c6c7dc75a96ddd2838 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 13:58:52 -0800 Subject: [PATCH 1046/1165] sunsu: Fix detection of SU ports which are RSC console or control. These device nodes are named "rsc-console" and "rsc-control" rather than 'serial', but the device_type property is 'serial' so we'll tip off of that for detection. Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 68d262b1574..f6511a44d15 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1517,6 +1517,10 @@ static const struct of_device_id su_match[] = { .name = "serial", .compatible = "su", }, + { + .type = "serial", + .compatible = "su", + }, {}, }; MODULE_DEVICE_TABLE(of, su_match); @@ -1548,6 +1552,12 @@ static int __init sunsu_init(void) num_uart++; } } + for_each_node_by_type(dp, "serial") { + if (of_device_is_compatible(dp, "su")) { + if (su_get_type(dp) == SU_PORT_PORT) + num_uart++; + } + } if (num_uart) { err = sunserial_register_minors(&sunsu_reg, num_uart); -- GitLab From 4e3533d05b6e5e66d1cda27f6671251c99c62894 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 14:03:34 -0800 Subject: [PATCH 1047/1165] serial: suncore: Add 'ignore_line' argument to sunserial_console_match(). This tells the logic to ignore the line match when deciding whether the device is the OpenFirmware specified console device or not. This is going to be used in the SU driver for rsc-console detection. There is probably a better way to handle this, but this is the least intrusive solution for now which we can validate won't break any other cases. Signed-off-by: David S. Miller --- drivers/serial/suncore.c | 19 ++++++++++--------- drivers/serial/suncore.h | 2 +- drivers/serial/sunsab.c | 6 ++++-- drivers/serial/sunsu.c | 3 ++- drivers/serial/sunzilog.c | 6 ++++-- 5 files changed, 21 insertions(+), 15 deletions(-) diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c index a2d4a19550a..50d3b5e4ec7 100644 --- a/drivers/serial/suncore.c +++ b/drivers/serial/suncore.c @@ -53,20 +53,21 @@ void sunserial_unregister_minors(struct uart_driver *drv, int count) EXPORT_SYMBOL(sunserial_unregister_minors); int sunserial_console_match(struct console *con, struct device_node *dp, - struct uart_driver *drv, int line) + struct uart_driver *drv, int line, bool ignore_line) { - int off; - if (!con || of_console_device != dp) return 0; - off = 0; - if (of_console_options && - *of_console_options == 'b') - off = 1; + if (!ignore_line) { + int off = 0; - if ((line & 1) != off) - return 0; + if (of_console_options && + *of_console_options == 'b') + off = 1; + + if ((line & 1) != off) + return 0; + } con->index = line; drv->cons = con; diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h index 042668aa602..cab95b3fbdd 100644 --- a/drivers/serial/suncore.h +++ b/drivers/serial/suncore.h @@ -26,7 +26,7 @@ extern int sunserial_register_minors(struct uart_driver *, int); extern void sunserial_unregister_minors(struct uart_driver *, int); extern int sunserial_console_match(struct console *, struct device_node *, - struct uart_driver *, int); + struct uart_driver *, int, bool); extern void sunserial_console_termios(struct console *); #endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index 8755de8adbc..e7215c200ec 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -1027,10 +1027,12 @@ static int __devinit sab_probe(struct of_device *op, const struct of_device_id * goto out1; sunserial_console_match(SUNSAB_CONSOLE(), op->node, - &sunsab_reg, up[0].port.line); + &sunsab_reg, up[0].port.line, + false); sunserial_console_match(SUNSAB_CONSOLE(), op->node, - &sunsab_reg, up[1].port.line); + &sunsab_reg, up[1].port.line, + false); err = uart_add_one_port(&sunsab_reg, &up[0].port); if (err) diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index f6511a44d15..4868b318e55 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1468,7 +1468,8 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m up->port.ops = &sunsu_pops; sunserial_console_match(SUNSU_CONSOLE(), dp, - &sunsu_reg, up->port.line); + &sunsu_reg, up->port.line, + false); err = uart_add_one_port(&sunsu_reg, &up->port); if (err) goto out_unmap; diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index ef693ae22e7..3242688978e 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1416,7 +1416,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m if (!keyboard_mouse) { if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node, - &sunzilog_reg, up[0].port.line)) + &sunzilog_reg, up[0].port.line, + false)) up->flags |= SUNZILOG_FLAG_IS_CONS; err = uart_add_one_port(&sunzilog_reg, &up[0].port); if (err) { @@ -1425,7 +1426,8 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m return err; } if (sunserial_console_match(SUNZILOG_CONSOLE(), op->node, - &sunzilog_reg, up[1].port.line)) + &sunzilog_reg, up[1].port.line, + false)) up->flags |= SUNZILOG_FLAG_IS_CONS; err = uart_add_one_port(&sunzilog_reg, &up[1].port); if (err) { -- GitLab From 457931de3b0925dc2eb941bc7d611a509be36dff Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 14:09:56 -0800 Subject: [PATCH 1048/1165] serial: suncore: Fix RSC/LOM handling in sunserial_console_termios(). RSC and LOM devices have fixed speed settings. We already had some code to match and handle "rsc" named devices on E250 systems, but we also have to handle 'rsc-console', 'rsc-control', and 'lom-console'. Also, in order to get this right regardless of what 'output-device' happens to be, explicitly pass the UART device node pointer to this routine. Signed-off-by: David S. Miller --- drivers/serial/suncore.c | 18 ++++++++++-------- drivers/serial/suncore.h | 3 ++- drivers/serial/sunhv.c | 2 +- drivers/serial/sunsab.c | 2 +- drivers/serial/sunzilog.c | 2 +- 5 files changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c index 50d3b5e4ec7..ed7d958b0a0 100644 --- a/drivers/serial/suncore.c +++ b/drivers/serial/suncore.c @@ -77,23 +77,24 @@ int sunserial_console_match(struct console *con, struct device_node *dp, } EXPORT_SYMBOL(sunserial_console_match); -void -sunserial_console_termios(struct console *con) +void sunserial_console_termios(struct console *con, struct device_node *uart_dp) { - struct device_node *dp; - const char *od, *mode, *s; + const char *mode, *s; char mode_prop[] = "ttyX-mode"; int baud, bits, stop, cflag; char parity; - dp = of_find_node_by_path("/options"); - od = of_get_property(dp, "output-device", NULL); - if (!strcmp(od, "rsc")) { - mode = of_get_property(of_console_device, + if (!strcmp(uart_dp->name, "rsc") || + !strcmp(uart_dp->name, "rsc-console") || + !strcmp(uart_dp->name, "rsc-control")) { + mode = of_get_property(uart_dp, "ssp-console-modes", NULL); if (!mode) mode = "115200,8,n,1,-"; + } else if (!strcmp(uart_dp->name, "lom-console")) { + mode = "9600,8,n,1,-"; } else { + struct device_node *dp; char c; c = 'a'; @@ -102,6 +103,7 @@ sunserial_console_termios(struct console *con) mode_prop[3] = c; + dp = of_find_node_by_path("/options"); mode = of_get_property(dp, mode_prop, NULL); if (!mode) mode = "9600,8,n,1,-"; diff --git a/drivers/serial/suncore.h b/drivers/serial/suncore.h index cab95b3fbdd..db2057936c3 100644 --- a/drivers/serial/suncore.h +++ b/drivers/serial/suncore.h @@ -27,6 +27,7 @@ extern void sunserial_unregister_minors(struct uart_driver *, int); extern int sunserial_console_match(struct console *, struct device_node *, struct uart_driver *, int, bool); -extern void sunserial_console_termios(struct console *); +extern void sunserial_console_termios(struct console *, + struct device_node *); #endif /* !(_SERIAL_SUN_H) */ diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c index d548652dee5..d14cca7fb88 100644 --- a/drivers/serial/sunhv.c +++ b/drivers/serial/sunhv.c @@ -566,7 +566,7 @@ static int __devinit hv_probe(struct of_device *op, const struct of_device_id *m goto out_free_con_read_page; sunserial_console_match(&sunhv_console, op->node, - &sunhv_reg, port->line); + &sunhv_reg, port->line, false); err = uart_add_one_port(&sunhv_reg, port); if (err) diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c index e7215c200ec..d514e28d075 100644 --- a/drivers/serial/sunsab.c +++ b/drivers/serial/sunsab.c @@ -883,7 +883,7 @@ static int sunsab_console_setup(struct console *con, char *options) printk("Console: ttyS%d (SAB82532)\n", (sunsab_reg.minor - 64) + con->index); - sunserial_console_termios(con); + sunserial_console_termios(con, to_of_device(up->port.dev)->node); switch (con->cflag & CBAUD) { case B150: baud = 150; break; diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c index 3242688978e..2c7a66af4f5 100644 --- a/drivers/serial/sunzilog.c +++ b/drivers/serial/sunzilog.c @@ -1180,7 +1180,7 @@ static int __init sunzilog_console_setup(struct console *con, char *options) (sunzilog_reg.minor - 64) + con->index, con->index); /* Get firmware console settings. */ - sunserial_console_termios(con); + sunserial_console_termios(con, to_of_device(up->port.dev)->node); /* Firmware console speed is limited to 150-->38400 baud so * this hackish cflag thing is OK. -- GitLab From 1917d17b903955b8b2903626a2e01d071a5d0ec9 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 14:11:40 -0800 Subject: [PATCH 1049/1165] sunsu: Pass true 'ignore_line' to console match when RSC or LOM console. Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 4868b318e55..4ee4167c662 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1409,6 +1409,7 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m struct uart_sunsu_port *up; struct resource *rp; enum su_type type; + bool ignore_line; int err; type = su_get_type(dp); @@ -1467,9 +1468,14 @@ static int __devinit su_probe(struct of_device *op, const struct of_device_id *m up->port.ops = &sunsu_pops; + ignore_line = false; + if (!strcmp(dp->name, "rsc-console") || + !strcmp(dp->name, "lom-console")) + ignore_line = true; + sunserial_console_match(SUNSU_CONSOLE(), dp, &sunsu_reg, up->port.line, - false); + ignore_line); err = uart_add_one_port(&sunsu_reg, &up->port); if (err) goto out_unmap; -- GitLab From be24656a5e2d68bfd0744f0742c4aceef2cf44b5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 24 Nov 2009 14:12:50 -0800 Subject: [PATCH 1050/1165] sunsu: Use sunserial_console_termios() in sunsu_console_setup(). Be like the other Sun serial drivers otherwise the special handling of OpenFirmware options and hard-coded overrides for LOM/RSC consoles will not be handled. Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 4ee4167c662..170d3d68c8f 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1329,11 +1329,9 @@ static void sunsu_console_write(struct console *co, const char *s, */ static int __init sunsu_console_setup(struct console *co, char *options) { + static struct ktermios dummy; + struct ktermios termios; struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; printk("Console: ttyS%d (SU)\n", (sunsu_reg.minor - 64) + co->index); @@ -1352,10 +1350,15 @@ static int __init sunsu_console_setup(struct console *co, char *options) */ spin_lock_init(&port->lock); - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); + /* Get firmware console settings. */ + sunserial_console_termios(co, to_of_device(port->dev)->node); - return uart_set_options(port, co, baud, parity, bits, flow); + memset(&termios, 0, sizeof(struct ktermios)); + termios.c_cflag = co->cflag; + port->mctrl |= TIOCM_DTR; + port->ops->set_termios(port, &termios, &dummy); + + return 0; } static struct console sunsu_console = { -- GitLab From 8e6c0332d5032aef2d3bc8f41771f999112c8c66 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 24 Nov 2009 22:17:59 +0000 Subject: [PATCH 1051/1165] [CIFS] fix oops in cifs_lookup during net boot Fixes bugzilla.kernel.org bug number 14641 Lookup called during network boot (network root filesystem for diskless workstation) has case where nd is null in lookup. This patch fixes that in cifs_lookup. (Shirish noted that 2.6.30 and 2.6.31 stable need the same check) Signed-off-by: Shirish Pargaonkar Acked-by: Jeff Layton Tested-by: Vladimir Stavrinov CC: Stable Signed-off-by: Steve French --- fs/cifs/dir.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 627a60a6c1b..32771f581b6 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -643,7 +643,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, * O_EXCL: optimize away the lookup, but don't hash the dentry. Let * the VFS handle the create. */ - if (nd->flags & LOOKUP_EXCL) { + if (nd && (nd->flags & LOOKUP_EXCL)) { d_instantiate(direntry, NULL); return 0; } @@ -675,7 +675,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, * reduction in network traffic in the other paths. */ if (pTcon->unix_ext) { - if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) && + if (nd && !(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) && (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open && (nd->intent.open.flags & O_CREAT)) { rc = cifs_posix_open(full_path, &newInode, nd->path.mnt, -- GitLab From 3e9848403ad59c53b31facb30b43ca80135ae0b9 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 24 Nov 2009 14:50:53 -0800 Subject: [PATCH 1052/1165] pktgen: Fix netdevice unregister When multi queue compatable names are used by pktgen (eg eth0@0), we currently cannot unload a NIC driver if one of its device is currently in use. Allow pktgen_find_dev() to find pktgen devices by their suffix (netdev name) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/pktgen.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/net/core/pktgen.c b/net/core/pktgen.c index 54c634fab6c..6e79e96cb4f 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -427,7 +427,7 @@ static const char version[] = static int pktgen_remove_device(struct pktgen_thread *t, struct pktgen_dev *i); static int pktgen_add_device(struct pktgen_thread *t, const char *ifname); static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t, - const char *ifname); + const char *ifname, bool exact); static int pktgen_device_event(struct notifier_block *, unsigned long, void *); static void pktgen_run_all_threads(void); static void pktgen_reset_all_threads(void); @@ -1818,9 +1818,10 @@ static struct pktgen_dev *__pktgen_NN_threads(const char *ifname, int remove) { struct pktgen_thread *t; struct pktgen_dev *pkt_dev = NULL; + bool exact = (remove == FIND); list_for_each_entry(t, &pktgen_threads, th_list) { - pkt_dev = pktgen_find_dev(t, ifname); + pkt_dev = pktgen_find_dev(t, ifname, exact); if (pkt_dev) { if (remove) { if_lock(t); @@ -3567,13 +3568,18 @@ static int pktgen_thread_worker(void *arg) } static struct pktgen_dev *pktgen_find_dev(struct pktgen_thread *t, - const char *ifname) + const char *ifname, bool exact) { struct pktgen_dev *p, *pkt_dev = NULL; - if_lock(t); + size_t len = strlen(ifname); + if_lock(t); list_for_each_entry(p, &t->if_list, list) - if (strncmp(p->odevname, ifname, IFNAMSIZ) == 0) { + if (strncmp(p->odevname, ifname, len) == 0) { + if (p->odevname[len]) { + if (exact || p->odevname[len] != '@') + continue; + } pkt_dev = p; break; } -- GitLab From cea62343956c24452700c06cf028b72414c58a74 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 24 Nov 2009 22:49:37 +0000 Subject: [PATCH 1053/1165] [CIFS] Duplicate data on appending to some Samba servers SMB writes are sent with a starting offset and length. When the server supports the newer SMB trans2 posix open (rather than using the SMB NTCreateX) a file can be opened with SMB_O_APPEND flag, and for that case Samba server assumes that the offset sent in SMBWriteX is unneeded since the write should go to the end of the file - which can cause problems if the write was cached (since the beginning part of a page could be written twice by the client mm). Jeff suggested that masking the flag on posix open on the client is easiest for the time being. Note that recent Samba server also had an unrelated problem with SMB NTCreateX and append (see samba bugzilla bug number 6898) which should not affect current Linux clients (unless cifs Unix Extensions are disabled). The cifs client did not send the O_APPEND flag on posix open before 2.6.29 so the fix is unneeded on early kernels. In the future, for the non-cached case (O_DIRECT, and forcedirectio mounts) it would be possible and useful to send O_APPEND on posix open (for Windows case: FILE_APPEND_DATA but not FILE_WRITE_DATA on SMB NTCreateX) but for cached writes although the vfs sets the offset to end of file it may fragment a write across pages - so we can't send O_APPEND on open (could result in sending part of a page twice). CC: Stable Reviewed-by: Shirish Pargaonkar Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/dir.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 32771f581b6..d3a6b07e335 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -214,8 +214,6 @@ int cifs_posix_open(char *full_path, struct inode **pinode, posix_flags |= SMB_O_EXCL; if (oflags & O_TRUNC) posix_flags |= SMB_O_TRUNC; - if (oflags & O_APPEND) - posix_flags |= SMB_O_APPEND; if (oflags & O_SYNC) posix_flags |= SMB_O_SYNC; if (oflags & O_DIRECTORY) -- GitLab From 2f81e752da4781fc276689fc14391346d0dbbe78 Mon Sep 17 00:00:00 2001 From: Steve French Date: Wed, 25 Nov 2009 00:11:31 +0000 Subject: [PATCH 1054/1165] [CIFS] Fix sparse warning Also update CHANGES file Signed-off-by: Steve French --- fs/cifs/CHANGES | 9 +++++++++ fs/cifs/dir.c | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 145540a316a..094ea65afc8 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -1,3 +1,12 @@ +Version 1.61 +------------ +Fix append problem to Samba servers (files opened with O_APPEND could +have duplicated data). Fix oops in cifs_lookup. Workaround problem +mounting to OS/400 Netserve. Fix oops in cifs_get_tcp_session. +Disable use of server inode numbers when server only +partially supports them (e.g. for one server querying inode numbers on +FindFirst fails but QPathInfo queries works). + Version 1.60 ------------- Fix memory leak in reconnect. Fix oops in DFS mount error path. diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index d3a6b07e335..1f42f772865 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -643,7 +643,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, */ if (nd && (nd->flags & LOOKUP_EXCL)) { d_instantiate(direntry, NULL); - return 0; + return NULL; } /* can not grab the rename sem here since it would -- GitLab From d0b3b119f4d9460f3947334cf384ae69c5417360 Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Tue, 24 Nov 2009 21:34:35 -0500 Subject: [PATCH 1055/1165] ACPICA: Silence the warning about _BIF returning the buffer _BIF was returning buffer instead of a string since day 1 of ACPI. Adding a warning for that is noble, but people don't like when someone cries wolf in a production system. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14379 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown --- drivers/acpi/acpica/acpredef.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h index cd80d1dd195..57bdaf6ffab 100644 --- a/drivers/acpi/acpica/acpredef.h +++ b/drivers/acpi/acpica/acpredef.h @@ -203,8 +203,9 @@ static const union acpi_predefined_info predefined_names[] = {{"_BCT", 1, ACPI_RTYPE_INTEGER}}, {{"_BDN", 0, ACPI_RTYPE_INTEGER}}, {{"_BFS", 1, 0}}, - {{"_BIF", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (9 Int),(4 Str) */ - {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 9, ACPI_RTYPE_STRING}, 4,0}}, + {{"_BIF", 0, ACPI_RTYPE_PACKAGE} }, /* Fixed-length (9 Int),(4 Str/Buf) */ + {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 9, + ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER}, 4, 0} }, {{"_BIX", 0, ACPI_RTYPE_PACKAGE}}, /* Fixed-length (16 Int),(4 Str) */ {{{ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 16, ACPI_RTYPE_STRING}, 4, -- GitLab From 8b1edc57a617d00845806ca1fce1799c08d50920 Mon Sep 17 00:00:00 2001 From: Jerone Young Date: Thu, 27 Aug 2009 00:04:44 -0500 Subject: [PATCH 1056/1165] ACPI: Add Thinkpad T400, T500 to OSI(Linux) white-list acpi_osi=Linux helps the mute button work properly by sending Linux a mute key press. http://bugzilla.kernel.org/show_bug.cgi?id=13934 Signed-off-by: Jerone Young Signed-off-by: Len Brown --- drivers/acpi/blacklist.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index e56b2a7b53d..23e5a0519af 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -224,6 +224,7 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { * _OSI(Linux) helps sound * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad R61"), * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T61"), + * T400, T500 * _OSI(Linux) has Linux specific hooks * DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"), * _OSI(Linux) is a NOP: @@ -254,6 +255,22 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X61"), }, }, + { + .callback = dmi_enable_osi_linux, + .ident = "Lenovo ThinkPad T400", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T400"), + }, + }, + { + .callback = dmi_enable_osi_linux, + .ident = "Lenovo ThinkPad T500", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T500"), + }, + }, {} }; -- GitLab From 80a8d1228e90349b4514e8c925c061fa5cbcea75 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 20 Nov 2009 19:48:23 +0100 Subject: [PATCH 1057/1165] thinkpad-acpi: fix sign of ERESTARTSYS return The returned error should be negative Signed-off-by: Roel Kluin Acked-by: Henrique de Moraes Holschuh Signed-off-by: Andrew Morton Cc: Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index d93108d148f..03c0a56f0c8 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -6313,7 +6313,7 @@ static int brightness_write(char *buf) * Doing it this way makes the syscall restartable in case of EINTR */ rc = brightness_set(level); - return (rc == -EINTR)? ERESTARTSYS : rc; + return (rc == -EINTR)? -ERESTARTSYS : rc; } static struct ibm_struct brightness_driver_data = { -- GitLab From 275014ae46871ce0ab08550fc4040f12b685813a Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 17 Nov 2009 14:07:22 -0800 Subject: [PATCH 1058/1165] thinkpad-acpi: fix detection of old ThinkPads There is a problem in the quirk tables used by tpacpi_is_fw_known() and tpacpi_check_outdated_fw(), which causes outdated BIOSes that are lacking the EC firmware ID DMI field to never match. This breaks module loading on, e.g. a T23 with outdated BIOS, and the module will refuse to load unless the "force_load=1" parameter is given. Fix the quirk tables so that they can also match the outdated BIOSes, which in turn will both fix the module loading, and also warn the user that he is using outdated firmware and should upgrade. This fixes a serious regression, introduced by commit e675abafcc0df38125e6e94a9ba91c92fe774f52, "thinkpad-acpi: be more strict when detecting a ThinkPad". http://bugzilla.kernel.org/show_bug.cgi?id=14597 Reported-by: Paul Kimoto Signed-off-by: Henrique de Moraes Holschuh Tested-by: Paul Kimoto Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 03c0a56f0c8..a848c7e20ae 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -1680,36 +1680,48 @@ static void tpacpi_remove_driver_attributes(struct device_driver *drv) | (__bv1) << 8 | (__bv2) } #define TPV_Q_X(__v, __bid1, __bid2, __bv1, __bv2, \ - __eid1, __eid2, __ev1, __ev2) \ + __eid, __ev1, __ev2) \ { .vendor = (__v), \ .bios = TPID(__bid1, __bid2), \ - .ec = TPID(__eid1, __eid2), \ + .ec = __eid, \ .quirks = (__ev1) << 24 | (__ev2) << 16 \ | (__bv1) << 8 | (__bv2) } #define TPV_QI0(__id1, __id2, __bv1, __bv2) \ TPV_Q(PCI_VENDOR_ID_IBM, __id1, __id2, __bv1, __bv2) +/* Outdated IBM BIOSes often lack the EC id string */ #define TPV_QI1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, \ - __bv1, __bv2, __id1, __id2, __ev1, __ev2) + __bv1, __bv2, TPID(__id1, __id2), \ + __ev1, __ev2), \ + TPV_Q_X(PCI_VENDOR_ID_IBM, __id1, __id2, \ + __bv1, __bv2, TPACPI_MATCH_UNKNOWN, \ + __ev1, __ev2) +/* Outdated IBM BIOSes often lack the EC id string */ #define TPV_QI2(__bid1, __bid2, __bv1, __bv2, \ __eid1, __eid2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, \ - __bv1, __bv2, __eid1, __eid2, __ev1, __ev2) + __bv1, __bv2, TPID(__eid1, __eid2), \ + __ev1, __ev2), \ + TPV_Q_X(PCI_VENDOR_ID_IBM, __bid1, __bid2, \ + __bv1, __bv2, TPACPI_MATCH_UNKNOWN, \ + __ev1, __ev2) #define TPV_QL0(__id1, __id2, __bv1, __bv2) \ TPV_Q(PCI_VENDOR_ID_LENOVO, __id1, __id2, __bv1, __bv2) #define TPV_QL1(__id1, __id2, __bv1, __bv2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_LENOVO, __id1, __id2, \ - __bv1, __bv2, __id1, __id2, __ev1, __ev2) + __bv1, __bv2, TPID(__id1, __id2), \ + __ev1, __ev2) #define TPV_QL2(__bid1, __bid2, __bv1, __bv2, \ __eid1, __eid2, __ev1, __ev2) \ TPV_Q_X(PCI_VENDOR_ID_LENOVO, __bid1, __bid2, \ - __bv1, __bv2, __eid1, __eid2, __ev1, __ev2) + __bv1, __bv2, TPID(__eid1, __eid2), \ + __ev1, __ev2) static const struct tpacpi_quirk tpacpi_bios_version_qtable[] __initconst = { /* Numeric models ------------------ */ -- GitLab From 7005291706341a11c094f39a756a01c9e649e5f9 Mon Sep 17 00:00:00 2001 From: Peter Feuerer Date: Tue, 17 Nov 2009 14:07:21 -0800 Subject: [PATCH 1059/1165] acerhdf: return temperature in milidegree instead of degree Return temperature in milidegree instead of degree, as sysfs-api requires the temperature in milidegree. Signed-off-by: Peter Feuerer Tested-by: Borislav Petkov Cc: Andreas Mohr Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/platform/x86/acerhdf.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 0a8f735f6c4..ab64522aaa6 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -52,7 +52,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.17" +#define DRV_VER "0.5.18" /* * According to the Atom N270 datasheet, @@ -61,7 +61,7 @@ * measured by the on-die thermal monitor are within 0 <= Tj <= 90. So, * assume 89°C is critical temperature. */ -#define ACERHDF_TEMP_CRIT 89 +#define ACERHDF_TEMP_CRIT 89000 #define ACERHDF_FAN_OFF 0 #define ACERHDF_FAN_AUTO 1 @@ -69,7 +69,7 @@ * No matter what value the user puts into the fanon variable, turn on the fan * at 80 degree Celsius to prevent hardware damage */ -#define ACERHDF_MAX_FANON 80 +#define ACERHDF_MAX_FANON 80000 /* * Maximum interval between two temperature checks is 15 seconds, as the die @@ -85,8 +85,8 @@ static int kernelmode; #endif static unsigned int interval = 10; -static unsigned int fanon = 63; -static unsigned int fanoff = 58; +static unsigned int fanon = 63000; +static unsigned int fanoff = 58000; static unsigned int verbose; static unsigned int fanstate = ACERHDF_FAN_AUTO; static char force_bios[16]; @@ -171,7 +171,7 @@ static int acerhdf_get_temp(int *temp) if (ec_read(bios_cfg->tempreg, &read_temp)) return -EINVAL; - *temp = read_temp; + *temp = read_temp * 1000; return 0; } -- GitLab From 865bddfbf70d9ba04638c15ef49f17b599d9bbf3 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 20 Oct 2009 13:38:04 +0000 Subject: [PATCH 1060/1165] Blackfin: fix suspend/resume failure with some on-chip ROMs Some Blackfin on-chip ROMs utilize some MDMA channels during the suspend and resume process, but don't clean up after themselves. So manually clear all DMA channels when resuming since no DMA could have been running at this point in time. Now Linux should be able to work regardless of any laziness on the part of the on-chip ROM or boot loader. Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/bfin_dma_5xx.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 1f170216d2f..3946aff4f41 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -225,8 +225,13 @@ int blackfin_dma_suspend(void) void blackfin_dma_resume(void) { int i; - for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) - dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; + + for (i = 0; i < MAX_DMA_CHANNELS; ++i) { + dma_ch[i].regs->cfg = 0; + + if (i < MAX_DMA_SUSPEND_CHANNELS) + dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; + } } #endif -- GitLab From 7bae2c4898dd6e1e4a8276e5c428c55a7ff01bdf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Goddard=20Rosa?= Date: Fri, 30 Oct 2009 05:57:22 -0200 Subject: [PATCH 1061/1165] Blackfin: fix cache Kconfig typo MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Kconfig option is "BFIN_EXTMEM_WRITETHROUGH", not "..._WRITETROUGH". Signed-off-by: André Goddard Rosa Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/cplb-mpu/cplbinit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index f7b9cdce823..b52c1f8c4bc 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c @@ -38,7 +38,7 @@ void __init generate_cplb_tables_cpu(unsigned int cpu) #ifdef CONFIG_BFIN_EXTMEM_DCACHEABLE d_cache = CPLB_L1_CHBL; -#ifdef CONFIG_BFIN_EXTMEM_WRITETROUGH +#ifdef CONFIG_BFIN_EXTMEM_WRITETHROUGH d_cache |= CPLB_L1_AOW | CPLB_WT; #endif #endif -- GitLab From af5d7fc7e4d8e34bad42178f7011287e94eeb3ed Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sun, 15 Nov 2009 18:18:41 -0500 Subject: [PATCH 1062/1165] Blackfin: update anomaly lists Add some recently documented anomalies (473, 474, 475, 477). Also stick a "do not edit" notice in here so people know these are copies of some master version. Signed-off-by: Mike Frysinger --- .../mach-bf518/include/mach/anomaly.h | 18 ++++++++++--- .../mach-bf527/include/mach/anomaly.h | 20 +++++++++++---- .../mach-bf533/include/mach/anomaly.h | 18 ++++++++++--- .../mach-bf537/include/mach/anomaly.h | 18 ++++++++++--- .../mach-bf538/include/mach/anomaly.h | 18 ++++++++++--- .../mach-bf548/include/mach/anomaly.h | 23 +++++++++++++---- .../mach-bf561/include/mach/anomaly.h | 25 +++++++++++++++---- 7 files changed, 109 insertions(+), 31 deletions(-) diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h index e9c65390edd..2829dd0400f 100644 --- a/arch/blackfin/mach-bf518/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf518/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -70,6 +74,10 @@ #define ANOMALY_05000461 (1) /* Synchronization Problem at Startup May Cause SPORT Transmit Channels to Misalign */ #define ANOMALY_05000462 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -133,5 +141,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h index 3f9052687fa..02040df8ec8 100644 --- a/arch/blackfin/mach-bf527/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h @@ -1,14 +1,18 @@ /* - * File: include/asm-blackfin/mach-bf527/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: * - Revision D, 08/14/2009; ADSP-BF526 Blackfin Processor Anomaly List - * - Revision F, 03/03/2009; ADSP-BF527 Blackfin Processor Anomaly List + * - Revision G, 08/25/2009; ADSP-BF527 Blackfin Processor Anomaly List */ #ifndef _MACH_ANOMALY_H_ @@ -200,6 +204,10 @@ #define ANOMALY_05000467 (1) /* PLL Latches Incorrect Settings During Reset */ #define ANOMALY_05000469 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -250,5 +258,7 @@ #define ANOMALY_05000412 (0) #define ANOMALY_05000447 (0) #define ANOMALY_05000448 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h index cd83db2fb1a..9b3f7a27714 100644 --- a/arch/blackfin/mach-bf533/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf533/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -202,6 +206,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. @@ -349,5 +357,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h index f091ad2d8ea..d2c427bc665 100644 --- a/arch/blackfin/mach-bf537/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf537/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -156,6 +160,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -202,5 +210,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h index 26b76083e14..d882b7e6f59 100644 --- a/arch/blackfin/mach-bf538/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf538/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -128,6 +132,10 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -176,5 +184,7 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) +#define ANOMALY_05000475 (0) #endif diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h index 52b116ae522..7d08c752449 100644 --- a/arch/blackfin/mach-bf548/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf548/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -24,6 +28,8 @@ #define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) +/* Data Corruption with Cached External Memory and Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000220 (1) /* False Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ @@ -200,6 +206,14 @@ #define ANOMALY_05000466 (1) /* Possible RX data corruption when control & data EP FIFOs are accessed via the core */ #define ANOMALY_05000467 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Access to DDR-SDRAM causes system hang under certain PLL/VR settings */ +#define ANOMALY_05000474 (1) +/* Core Hang With L2/L3 Configured in Writeback Cache Mode */ +#define ANOMALY_05000475 (1) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000099 (0) @@ -215,7 +229,6 @@ #define ANOMALY_05000198 (0) #define ANOMALY_05000202 (0) #define ANOMALY_05000215 (0) -#define ANOMALY_05000220 (0) #define ANOMALY_05000227 (0) #define ANOMALY_05000230 (0) #define ANOMALY_05000231 (0) diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h index 70da495c966..5ddc981e993 100644 --- a/arch/blackfin/mach-bf561/include/mach/anomaly.h +++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h @@ -1,9 +1,13 @@ /* - * File: include/asm-blackfin/mach-bf561/anomaly.h - * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * DO NOT EDIT THIS FILE + * This file is under version control at + * svn://sources.blackfin.uclinux.org/toolchain/trunk/proc-defs/header-frags/ + * and can be replaced with that version at any time + * DO NOT EDIT THIS FILE * - * Copyright (C) 2004-2009 Analog Devices Inc. - * Licensed under the GPL-2 or later. + * Copyright 2004-2009 Analog Devices Inc. + * Licensed under the ADI BSD license. + * https://docs.blackfin.uclinux.org/doku.php?id=adi_bsd */ /* This file should be up to date with: @@ -213,7 +217,11 @@ /* Disabling Peripherals with DMA Running May Cause DMA System Instability */ #define ANOMALY_05000278 (__SILICON_REVISION__ < 5) /* False Hardware Error Exception when ISR Context Is Not Restored */ -#define ANOMALY_05000281 (__SILICON_REVISION__ < 5) +/* Temporarily walk around for bug 5423 till this issue is confirmed by + * official anomaly document. It looks 05000281 still exists on bf561 + * v0.5. + */ +#define ANOMALY_05000281 (__SILICON_REVISION__ <= 5) /* System MMR Write Is Stalled Indefinitely when Killed in a Particular Stage */ #define ANOMALY_05000283 (1) /* Reads Will Receive Incorrect Data under Certain Conditions */ @@ -280,6 +288,12 @@ #define ANOMALY_05000443 (1) /* False Hardware Error when RETI Points to Invalid Memory */ #define ANOMALY_05000461 (1) +/* Interrupted 32-Bit SPORT Data Register Access Results In Underflow */ +#define ANOMALY_05000473 (1) +/* Core Hang With L2/L3 Configured in Writeback Cache Mode */ +#define ANOMALY_05000475 (__SILICON_REVISION__ < 4) +/* TESTSET Instruction Cannot Be Interrupted */ +#define ANOMALY_05000477 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000119 (0) @@ -304,5 +318,6 @@ #define ANOMALY_05000450 (0) #define ANOMALY_05000465 (0) #define ANOMALY_05000467 (0) +#define ANOMALY_05000474 (0) #endif -- GitLab From f99e8c1d0f41011870d14d5990c65e65b123f2ef Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 3 Nov 2009 03:14:38 +0000 Subject: [PATCH 1063/1165] Blackfin: work around testset anomaly 05000477 Ironically, the atomic testset instruction cannot be interrupted else it will produce incorrect results. So disable interrupts to help it out. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf561/atomic.S | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/arch/blackfin/mach-bf561/atomic.S b/arch/blackfin/mach-bf561/atomic.S index 0261a5e751b..f99f174b129 100644 --- a/arch/blackfin/mach-bf561/atomic.S +++ b/arch/blackfin/mach-bf561/atomic.S @@ -19,6 +19,16 @@ \reg\().h = _corelock; .endm +.macro safe_testset addr:req, scratch:req +#if ANOMALY_05000477 + cli \scratch; + testset (\addr); + sti \scratch; +#else + testset (\addr); +#endif +.endm + /* * r0 = address of atomic data to flush and invalidate (32bit). * @@ -33,7 +43,7 @@ ENTRY(_get_core_lock) cli r0; coreslot_loadaddr p0; .Lretry_corelock: - testset (p0); + safe_testset p0, r2; if cc jump .Ldone_corelock; SSYNC(r2); jump .Lretry_corelock @@ -56,7 +66,7 @@ ENTRY(_get_core_lock_noflush) cli r0; coreslot_loadaddr p0; .Lretry_corelock_noflush: - testset (p0); + safe_testset p0, r2; if cc jump .Ldone_corelock_noflush; SSYNC(r2); jump .Lretry_corelock_noflush -- GitLab From a2ca78cee1c428843f6833150c7e64db05f9d668 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 3 Nov 2009 02:57:45 +0000 Subject: [PATCH 1064/1165] Blackfin: check for anomaly 05000475 Parts that have on-chip L2 SRAM cannot safely utilize writeback caching mode, so reject any attempts to use it. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-common/arch_checks.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index 9dbafcdcf47..f2ca211a76a 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -57,3 +57,8 @@ (!defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) && defined(CONFIG_BFIN_L2_WRITEBACK))) # error You are exposing Anomaly 220 in this config, either config L2 as Write Through, or make External Memory WB. #endif + +#if ANOMALY_05000475 && \ + (defined(CONFIG_BFIN_EXTMEM_WRITEBACK) || defined(CONFIG_BFIN_L2_WRITEBACK)) +# error "Anomaly 475 does not allow you to use Write Back cache with L2 or External Memory" +#endif -- GitLab From 46b60faf8c68a200bbccbe5bc6e51c414145b9af Mon Sep 17 00:00:00 2001 From: Jie Zhang Date: Fri, 20 Nov 2009 22:52:08 +0000 Subject: [PATCH 1065/1165] Blackfin: fix typo in ptrace poking Commit c014e15a2f667f9 (Blackfin: convert ptrace to new memory functions) introduced a copy & paste typo in the ptrace poke data/text handling. The access_process_vm() function call was telling it to read instead of write. Signed-off-by: Jie Zhang Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 0982b5d5af1..56b0ba12175 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -315,7 +315,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case BFIN_MEM_ACCESS_CORE: case BFIN_MEM_ACCESS_CORE_ONLY: copied = access_process_vm(child, addr, &data, - to_copy, 0); + to_copy, 1); if (copied) break; -- GitLab From 05bad36ce7a29e1e5eaf5f730ef004effed3add4 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 21 Nov 2009 19:35:58 +0100 Subject: [PATCH 1066/1165] Blackfin: fix memset in smp_send_reschedule() and -stop() To set zeroes the sizeof the struct should be used rather than sizeof the pointer, kzalloc does that. Signed-off-by: Roel Kluin Signed-off-by: Mike Frysinger --- arch/blackfin/mach-common/smp.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index d98585f3237..d92b168c832 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -276,10 +276,9 @@ void smp_send_reschedule(int cpu) if (cpu_is_offline(cpu)) return; - msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + msg = kzalloc(sizeof(*msg), GFP_ATOMIC); if (!msg) return; - memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_RESCHEDULE; @@ -305,10 +304,9 @@ void smp_send_stop(void) if (cpus_empty(callmap)) return; - msg = kmalloc(sizeof(*msg), GFP_ATOMIC); + msg = kzalloc(sizeof(*msg), GFP_ATOMIC); if (!msg) return; - memset(msg, 0, sizeof(msg)); INIT_LIST_HEAD(&msg->list); msg->type = BFIN_IPI_CPU_STOP; -- GitLab From aa23531ce5fb589d941b5bd84eb258e07131826b Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Mon, 21 Sep 2009 11:51:31 +0000 Subject: [PATCH 1067/1165] Blackfin: fix SMP build error in start_thread() Commit d5ce528c8e46fa5afb9 (Blackfin: convert irq/process to asm-generic) incorrectly merged the smp and non-smp cases of start_thread() causing the L1 stack to be setup on the SMP port instead of the UP port. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 430ae39456e..5cc7e2e9e41 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c @@ -151,7 +151,7 @@ void start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_ regs->pc = new_ip; if (current->mm) regs->p5 = current->mm->start_data; -#ifdef CONFIG_SMP +#ifndef CONFIG_SMP task_thread_info(current)->l1_task_info.stack_start = (void *)current->mm->context.stack_start; task_thread_info(current)->l1_task_info.lowest_sp = (void *)new_sp; -- GitLab From 8e9e0eea9955bffbe5e5cd6355157cabddc31f17 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Wed, 11 Nov 2009 02:30:50 +0000 Subject: [PATCH 1068/1165] drm/i915: Fix CRT hotplug detect by checking really no channels attached For CRT hotplug detect status, we have four test results as blue channel only, green channel only, both blue and green channel, and no channel attached. Origin code only marks both blue and green channel case as connected, but ignore other possible connected states. This one trys to detect CRT by checking no channel attached case instead. Signed-off-by: Zhenyu Wang Signed-off-by: Eric Anholt --- drivers/gpu/drm/i915/intel_crt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 212e22740fc..e5051446c48 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -262,8 +262,8 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector) } while (time_after(timeout, jiffies)); } - if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) == - CRT_HOTPLUG_MONITOR_COLOR) + if ((I915_READ(PORT_HOTPLUG_STAT) & CRT_HOTPLUG_MONITOR_MASK) != + CRT_HOTPLUG_MONITOR_NONE) return true; return false; -- GitLab From ca9ab10033d190c1ede85fdf456307bdfdabf079 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 22 Nov 2009 15:40:31 +0000 Subject: [PATCH 1069/1165] drm/i915: Select CONFIG_SHMEM The driver requires shmfs as the backing filesystem to handle the buffer objects, so ensure it is selected if the user chooses to build our driver. Fixes: Bug 14662 - Dell E5500 kernel panic with KMS http://bugzilla.kernel.org/show_bug.cgi?id=14662 The revealing nature of the panic is the NULL function pointer dereference in read_cache_page_async(). Signed-off-by: Chris Wilson Reported-and-tested-by: Mateusz Kaduk Signed-off-by: Eric Anholt Cc: stable@kernel.org --- drivers/gpu/drm/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index f831ea15929..96eddd17e05 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -92,6 +92,7 @@ config DRM_I830 config DRM_I915 tristate "i915 driver" depends on AGP_INTEL + select SHMEM select DRM_KMS_HELPER select FB_CFB_FILLRECT select FB_CFB_COPYAREA -- GitLab From 9faf3c1d0dab9e9f4b0cbd42bc37be515d8b8cb1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 25 Nov 2009 22:14:59 +0000 Subject: [PATCH 1070/1165] [ARM] Update mach-types Signed-off-by: Russell King --- arch/arm/tools/mach-types | 119 +++++++++++++++++++++++++++++++++++++- 1 file changed, 117 insertions(+), 2 deletions(-) diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 94be7bb6cb9..07b976da617 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Fri Sep 18 21:42:00 2009 +# Last update: Wed Nov 25 22:14:58 2009 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -928,7 +928,7 @@ palmt5 MACH_PALMT5 PALMT5 917 palmtc MACH_PALMTC PALMTC 918 omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919 mxc30030evb MACH_MXC30030EVB MXC30030EVB 920 -rea_2d MACH_REA_2D REA_2D 921 +rea_cpu2 MACH_REA_2D REA_2D 921 eti3e524 MACH_TI3E524 TI3E524 922 ateb9200 MACH_ATEB9200 ATEB9200 923 auckland MACH_AUCKLAND AUCKLAND 924 @@ -2421,3 +2421,118 @@ liberty MACH_LIBERTY LIBERTY 2434 mh355 MACH_MH355 MH355 2435 pc7802 MACH_PC7802 PC7802 2436 gnet_sgc MACH_GNET_SGC GNET_SGC 2437 +einstein15 MACH_EINSTEIN15 EINSTEIN15 2438 +cmpd MACH_CMPD CMPD 2439 +davinci_hase1 MACH_DAVINCI_HASE1 DAVINCI_HASE1 2440 +lgeincitephone MACH_LGEINCITEPHONE LGEINCITEPHONE 2441 +ea313x MACH_EA313X EA313X 2442 +fwbd_39064 MACH_FWBD_39064 FWBD_39064 2443 +fwbd_390128 MACH_FWBD_390128 FWBD_390128 2444 +pelco_moe MACH_PELCO_MOE PELCO_MOE 2445 +minimix27 MACH_MINIMIX27 MINIMIX27 2446 +omap3_thunder MACH_OMAP3_THUNDER OMAP3_THUNDER 2447 +passionc MACH_PASSIONC PASSIONC 2448 +mx27amata MACH_MX27AMATA MX27AMATA 2449 +bgat1 MACH_BGAT1 BGAT1 2450 +buzz MACH_BUZZ BUZZ 2451 +mb9g20 MACH_MB9G20 MB9G20 2452 +yushan MACH_YUSHAN YUSHAN 2453 +lizard MACH_LIZARD LIZARD 2454 +omap3polycom MACH_OMAP3POLYCOM OMAP3POLYCOM 2455 +smdkv210 MACH_SMDKV210 SMDKV210 2456 +bravo MACH_BRAVO BRAVO 2457 +siogentoo1 MACH_SIOGENTOO1 SIOGENTOO1 2458 +siogentoo2 MACH_SIOGENTOO2 SIOGENTOO2 2459 +sm3k MACH_SM3K SM3K 2460 +acer_tempo_f900 MACH_ACER_TEMPO_F900 ACER_TEMPO_F900 2461 +sst61vc010_dev MACH_SST61VC010_DEV SST61VC010_DEV 2462 +glittertind MACH_GLITTERTIND GLITTERTIND 2463 +omap_zoom3 MACH_OMAP_ZOOM3 OMAP_ZOOM3 2464 +omap_3630sdp MACH_OMAP_3630SDP OMAP_3630SDP 2465 +cybook2440 MACH_CYBOOK2440 CYBOOK2440 2466 +torino_s MACH_TORINO_S TORINO_S 2467 +havana MACH_HAVANA HAVANA 2468 +beaumont_11 MACH_BEAUMONT_11 BEAUMONT_11 2469 +vanguard MACH_VANGUARD VANGUARD 2470 +s5pc110_draco MACH_S5PC110_DRACO S5PC110_DRACO 2471 +cartesio_two MACH_CARTESIO_TWO CARTESIO_TWO 2472 +aster MACH_ASTER ASTER 2473 +voguesv210 MACH_VOGUESV210 VOGUESV210 2474 +acm500x MACH_ACM500X ACM500X 2475 +km9260 MACH_KM9260 KM9260 2476 +nideflexg1 MACH_NIDEFLEXG1 NIDEFLEXG1 2477 +ctera_plug_io MACH_CTERA_PLUG_IO CTERA_PLUG_IO 2478 +smartq7 MACH_SMARTQ7 SMARTQ7 2479 +at91sam9g10ek2 MACH_AT91SAM9G10EK2 AT91SAM9G10EK2 2480 +asusp527 MACH_ASUSP527 ASUSP527 2481 +at91sam9g20mpm2 MACH_AT91SAM9G20MPM2 AT91SAM9G20MPM2 2482 +topasa900 MACH_TOPASA900 TOPASA900 2483 +electrum_100 MACH_ELECTRUM_100 ELECTRUM_100 2484 +mx51grb MACH_MX51GRB MX51GRB 2485 +xea300 MACH_XEA300 XEA300 2486 +htcstartrek MACH_HTCSTARTREK HTCSTARTREK 2487 +lima MACH_LIMA LIMA 2488 +csb740 MACH_CSB740 CSB740 2489 +usb_s8815 MACH_USB_S8815 USB_S8815 2490 +watson_efm_plugin MACH_WATSON_EFM_PLUGIN WATSON_EFM_PLUGIN 2491 +milkyway MACH_MILKYWAY MILKYWAY 2492 +g4evm MACH_G4EVM G4EVM 2493 +picomod6 MACH_PICOMOD6 PICOMOD6 2494 +omapl138_hawkboard MACH_OMAPL138_HAWKBOARD OMAPL138_HAWKBOARD 2495 +ip6000 MACH_IP6000 IP6000 2496 +ip6010 MACH_IP6010 IP6010 2497 +utm400 MACH_UTM400 UTM400 2498 +omap3_zybex MACH_OMAP3_ZYBEX OMAP3_ZYBEX 2499 +wireless_space MACH_WIRELESS_SPACE WIRELESS_SPACE 2500 +sx560 MACH_SX560 SX560 2501 +ts41x MACH_TS41X TS41X 2502 +elphel10373 MACH_ELPHEL10373 ELPHEL10373 2503 +rhobot MACH_RHOBOT RHOBOT 2504 +mx51_refresh MACH_MX51_REFRESH MX51_REFRESH 2505 +ls9260 MACH_LS9260 LS9260 2506 +shank MACH_SHANK SHANK 2507 +qsd8x50_st1 MACH_QSD8X50_ST1 QSD8X50_ST1 2508 +at91sam9m10ekes MACH_AT91SAM9M10EKES AT91SAM9M10EKES 2509 +hiram MACH_HIRAM HIRAM 2510 +phy3250 MACH_PHY3250 PHY3250 2511 +ea3250 MACH_EA3250 EA3250 2512 +fdi3250 MACH_FDI3250 FDI3250 2513 +whitestone MACH_WHITESTONE WHITESTONE 2514 +at91sam9263nit MACH_AT91SAM9263NIT AT91SAM9263NIT 2515 +ccmx51 MACH_CCMX51 CCMX51 2516 +ccmx51js MACH_CCMX51JS CCMX51JS 2517 +ccwmx51 MACH_CCWMX51 CCWMX51 2518 +ccwmx51js MACH_CCWMX51JS CCWMX51JS 2519 +mini6410 MACH_MINI6410 MINI6410 2520 +tiny6410 MACH_TINY6410 TINY6410 2521 +nano6410 MACH_NANO6410 NANO6410 2522 +at572d940hfnldb MACH_AT572D940HFNLDB AT572D940HFNLDB 2523 +htcleo MACH_HTCLEO HTCLEO 2524 +avp13 MACH_AVP13 AVP13 2525 +xxsvideod MACH_XXSVIDEOD XXSVIDEOD 2526 +vpnext MACH_VPNEXT VPNEXT 2527 +swarco_itc3 MACH_SWARCO_ITC3 SWARCO_ITC3 2528 +tx51 MACH_TX51 TX51 2529 +dolby_cat1021 MACH_DOLBY_CAT1021 DOLBY_CAT1021 2530 +mx28evk MACH_MX28EVK MX28EVK 2531 +phoenix260 MACH_PHOENIX260 PHOENIX260 2532 +uvaca_stork MACH_UVACA_STORK UVACA_STORK 2533 +smartq5 MACH_SMARTQ5 SMARTQ5 2534 +all3078 MACH_ALL3078 ALL3078 2535 +ctera_2bay_ds MACH_CTERA_2BAY_DS CTERA_2BAY_DS 2536 +siogentoo3 MACH_SIOGENTOO3 SIOGENTOO3 2537 +epb5000 MACH_EPB5000 EPB5000 2538 +hy9263 MACH_HY9263 HY9263 2539 +acer_tempo_m900 MACH_ACER_TEMPO_M900 ACER_TEMPO_M900 2540 +acer_tempo_dx650 MACH_ACER_TEMPO_DX900 ACER_TEMPO_DX900 2541 +acer_tempo_x960 MACH_ACER_TEMPO_X960 ACER_TEMPO_X960 2542 +acer_eten_v900 MACH_ACER_ETEN_V900 ACER_ETEN_V900 2543 +acer_eten_x900 MACH_ACER_ETEN_X900 ACER_ETEN_X900 2544 +bonnell MACH_BONNELL BONNELL 2545 +oht_mx27 MACH_OHT_MX27 OHT_MX27 2546 +htcquartz MACH_HTCQUARTZ HTCQUARTZ 2547 +davinci_dm6467tevm MACH_DAVINCI_DM6467TEVM DAVINCI_DM6467TEVM 2548 +c3ax03 MACH_C3AX03 C3AX03 2549 +mxt_td60 MACH_MXT_TD60 MXT_TD60 2550 +esyx MACH_ESYX ESYX 2551 +bulldog MACH_BULLDOG BULLDOG 2553 -- GitLab From 46a965462a1c568a7cd7dc338de4a0afa5ce61c5 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Wed, 25 Nov 2009 22:28:20 -0800 Subject: [PATCH 1071/1165] Input: keyboard - fix braille keyboard keysym generation Keysyms stored in key_map[] are not simply K() values, but U(K()) values, as can be seen in the KDSKBENT ioctl handler. The kernel-generated braille keysyms thus need a U() call too. Signed-off-by: Samuel Thibault Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- drivers/char/keyboard.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 737be953cc5..950837cf9e9 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -1249,7 +1249,7 @@ static void kbd_keycode(unsigned int keycode, int down, int hw_raw) if (keycode >= NR_KEYS) if (keycode >= KEY_BRL_DOT1 && keycode <= KEY_BRL_DOT8) - keysym = K(KT_BRL, keycode - KEY_BRL_DOT1 + 1); + keysym = U(K(KT_BRL, keycode - KEY_BRL_DOT1 + 1)); else return; else -- GitLab From 5f5bfb09d81c9a1d26238ae6668e584c14ae3daf Mon Sep 17 00:00:00 2001 From: Michele Jr De Candia Date: Thu, 26 Nov 2009 09:22:32 +0100 Subject: [PATCH 1072/1165] i2c/tsl2550: Fix lux value in extended mode According to the TAOS Application Note 'Controlling a Backlight with the TSL2550 Ambient Light Sensor' (page 14), the actual lux value in extended mode should be obtained multiplying the calculated lux value by 5. Signed-off-by: Michele Jr De Candia Signed-off-by: Jean Delvare --- drivers/i2c/chips/tsl2550.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c index aa96bd2d27e..a0702f36a72 100644 --- a/drivers/i2c/chips/tsl2550.c +++ b/drivers/i2c/chips/tsl2550.c @@ -257,6 +257,7 @@ static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO, static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf) { + struct tsl2550_data *data = i2c_get_clientdata(client); u8 ch0, ch1; int ret; @@ -274,6 +275,8 @@ static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf) ret = tsl2550_calculate_lux(ch0, ch1); if (ret < 0) return ret; + if (data->operating_mode == 1) + ret *= 5; return sprintf(buf, "%d\n", ret); } -- GitLab From 03b70d625c10d1605012d41489d9df18467c5f55 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 26 Nov 2009 09:22:32 +0100 Subject: [PATCH 1073/1165] MAINTAINERS: Add missing i2c files Add missing header files to the i2c subsystem section. Signed-off-by: Jean Delvare --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index c824b4d6275..d5e8d5ad115 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2533,8 +2533,7 @@ S: Maintained F: Documentation/i2c/ F: drivers/i2c/ F: include/linux/i2c.h -F: include/linux/i2c-dev.h -F: include/linux/i2c-id.h +F: include/linux/i2c-*.h I2C-TINY-USB DRIVER M: Till Harbaum -- GitLab From bbd2d9c9198c6efd449e9d395b3eaf2d03aa3bba Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 26 Nov 2009 09:22:33 +0100 Subject: [PATCH 1074/1165] i2c: Fix userspace_device list corruption Fix userspace_device list corruption. The corruption was caused by clients not being removed when adapters with such clients were themselves removed. Something like the following would trigger it (assuming i2c-stub gets adapter number 3): # modprobe i2c-stub chip_addr=0x50 # echo 24c08 0x50 > /sys/bus/i2c/devices/i2c-3/new_device # rmmod i2c-stub # modprobe i2c-stub chip_addr=0x50 # echo 24c08 0x50 > /sys/bus/i2c/devices/i2c-3/new_device For the records, the stack trace in the kernel logs look like this: kernel: WARNING: at lib/list_debug.c:30 __list_add+0x8b/0x90() kernel: Hardware name: (...) kernel: list_add corruption. prev->next should be next (c137fc84), but was (null). (prev=f57111b8). kernel: Modules linked in: (...) kernel: Pid: 4669, comm: bash Not tainted 2.6.32-rc8 #259 kernel: Call Trace: kernel: [] ? __list_add+0x8b/0x90 kernel: [] ? __list_add+0x8b/0x90 kernel: [] warn_slowpath_common+0x6c/0xc0 kernel: [] ? __list_add+0x8b/0x90 kernel: [] warn_slowpath_fmt+0x26/0x30 kernel: [] __list_add+0x8b/0x90 kernel: [] i2c_sysfs_new_device+0x1c5/0x250 kernel: [] ? might_fault+0x2e/0x80 kernel: [] ? i2c_sysfs_new_device+0x0/0x250 kernel: [] dev_attr_store+0x25/0x30 kernel: [] sysfs_write_file+0x9c/0xf0 kernel: [] vfs_write+0x9c/0x160 kernel: [] ? sysfs_write_file+0x0/0xf0 kernel: [] sys_write+0x3d/0x70 kernel: [] sysenter_do_call+0x12/0x36 Signed-off-by: Jean Delvare --- drivers/i2c/i2c-core.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 8d80fceca6a..29650435514 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -762,6 +762,7 @@ int i2c_del_adapter(struct i2c_adapter *adap) { int res = 0; struct i2c_adapter *found; + struct i2c_client *client, *next; /* First make sure that this adapter was ever added */ mutex_lock(&core_lock); @@ -781,6 +782,16 @@ int i2c_del_adapter(struct i2c_adapter *adap) if (res) return res; + /* Remove devices instantiated from sysfs */ + list_for_each_entry_safe(client, next, &userspace_devices, detected) { + if (client->adapter == adap) { + dev_dbg(&adap->dev, "Removing %s at 0x%x\n", + client->name, client->addr); + list_del(&client->detected); + i2c_unregister_device(client); + } + } + /* Detach any active clients. This can't fail, thus we do not checking the returned value. */ res = device_for_each_child(&adap->dev, NULL, __unregister_client); -- GitLab From 4d29196c535088e807061ce2a0aa526daec2edfb Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 26 Nov 2009 09:22:33 +0100 Subject: [PATCH 1075/1165] at24: Use timeout also for read Writes may take some time on EEPROMs, so for consecutive writes, we already have a loop waiting for the EEPROM to become ready. Use such a loop for reads, too, in case somebody wants to immediately read after a write. Detailed bug report and test case can be found here: http://article.gmane.org/gmane.linux.drivers.i2c/4660 Reported-by: Aleksandar Ivanov Signed-off-by: Wolfram Sang Tested-by: Aleksandar Ivanov Cc: David Brownell Signed-off-by: Jean Delvare --- drivers/misc/eeprom/at24.c | 76 ++++++++++++++++++++++---------------- 1 file changed, 45 insertions(+), 31 deletions(-) diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index db39f4a52f5..2cb2736d65a 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -158,6 +158,7 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, struct i2c_msg msg[2]; u8 msgbuf[2]; struct i2c_client *client; + unsigned long timeout, read_time; int status, i; memset(msg, 0, sizeof(msg)); @@ -183,47 +184,60 @@ static ssize_t at24_eeprom_read(struct at24_data *at24, char *buf, if (count > io_limit) count = io_limit; - /* Smaller eeproms can work given some SMBus extension calls */ if (at24->use_smbus) { + /* Smaller eeproms can work given some SMBus extension calls */ if (count > I2C_SMBUS_BLOCK_MAX) count = I2C_SMBUS_BLOCK_MAX; - status = i2c_smbus_read_i2c_block_data(client, offset, - count, buf); - dev_dbg(&client->dev, "smbus read %zu@%d --> %d\n", - count, offset, status); - return (status < 0) ? -EIO : status; + } else { + /* + * When we have a better choice than SMBus calls, use a + * combined I2C message. Write address; then read up to + * io_limit data bytes. Note that read page rollover helps us + * here (unlike writes). msgbuf is u8 and will cast to our + * needs. + */ + i = 0; + if (at24->chip.flags & AT24_FLAG_ADDR16) + msgbuf[i++] = offset >> 8; + msgbuf[i++] = offset; + + msg[0].addr = client->addr; + msg[0].buf = msgbuf; + msg[0].len = i; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].buf = buf; + msg[1].len = count; } /* - * When we have a better choice than SMBus calls, use a combined - * I2C message. Write address; then read up to io_limit data bytes. - * Note that read page rollover helps us here (unlike writes). - * msgbuf is u8 and will cast to our needs. + * Reads fail if the previous write didn't complete yet. We may + * loop a few times until this one succeeds, waiting at least + * long enough for one entire page write to work. */ - i = 0; - if (at24->chip.flags & AT24_FLAG_ADDR16) - msgbuf[i++] = offset >> 8; - msgbuf[i++] = offset; - - msg[0].addr = client->addr; - msg[0].buf = msgbuf; - msg[0].len = i; + timeout = jiffies + msecs_to_jiffies(write_timeout); + do { + read_time = jiffies; + if (at24->use_smbus) { + status = i2c_smbus_read_i2c_block_data(client, offset, + count, buf); + } else { + status = i2c_transfer(client->adapter, msg, 2); + if (status == 2) + status = count; + } + dev_dbg(&client->dev, "read %zu@%d --> %d (%ld)\n", + count, offset, status, jiffies); - msg[1].addr = client->addr; - msg[1].flags = I2C_M_RD; - msg[1].buf = buf; - msg[1].len = count; + if (status == count) + return count; - status = i2c_transfer(client->adapter, msg, 2); - dev_dbg(&client->dev, "i2c read %zu@%d --> %d\n", - count, offset, status); + /* REVISIT: at HZ=100, this is sloooow */ + msleep(1); + } while (time_before(read_time, timeout)); - if (status == 2) - return count; - else if (status >= 0) - return -EIO; - else - return status; + return -ETIMEDOUT; } static ssize_t at24_read(struct at24_data *at24, -- GitLab From 3bf3583b6a49c318f7ed350862d7a217b500e71c Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Tue, 10 Nov 2009 00:39:12 -0500 Subject: [PATCH 1076/1165] [SCSI] sd: Return correct error code for DIF sd_dif.c was not updated to return -EILSEQ, leading to error handling failures in applications which provide their own integrity metadata (as opposed to being protected by the block layer functions). Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/sd_dif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/sd_dif.c b/drivers/scsi/sd_dif.c index 88da9774571..84be62149c6 100644 --- a/drivers/scsi/sd_dif.c +++ b/drivers/scsi/sd_dif.c @@ -418,7 +418,7 @@ error: __func__, virt, phys, be32_to_cpu(sdt->ref_tag), be16_to_cpu(sdt->app_tag)); - return -EIO; + return -EILSEQ; } /* -- GitLab From 860dc73608a091e0b325218acc2701709d5f221a Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 19 Nov 2009 17:48:29 -0500 Subject: [PATCH 1077/1165] [SCSI] fix async scan add/remove race resulting in an oops Async scanning introduced a very wide window where the SCSI device is up and running but has not yet been added to sysfs. We delay the adding until all scans have completed to retain the same ordering as sync scanning. This delay in visibility causes an oops if a device is removed before we make it visible because the SCSI removal routines have an inbuilt assumption that if a device is in SDEV_RUNNING state, it must be visible (which is not necessarily true in the async scanning case). Fix this by introducing an additional is_visible flag which we can use to condition the tear down so we do the right thing for running but not yet made visible. Reported-by: Alexey Kuznetsov Signed-off-by: James Bottomley --- drivers/scsi/scsi_scan.c | 18 +++-------- drivers/scsi/scsi_sysfs.c | 63 ++++++++++++++++---------------------- include/scsi/scsi_device.h | 1 + 3 files changed, 32 insertions(+), 50 deletions(-) diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 0547a7f44d4..47291bcff0d 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -952,16 +952,6 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, return SCSI_SCAN_LUN_PRESENT; } -static inline void scsi_destroy_sdev(struct scsi_device *sdev) -{ - scsi_device_set_state(sdev, SDEV_DEL); - if (sdev->host->hostt->slave_destroy) - sdev->host->hostt->slave_destroy(sdev); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_dev); - put_device(&sdev->sdev_gendev); -} - #ifdef CONFIG_SCSI_LOGGING /** * scsi_inq_str - print INQUIRY data from min to max index, strip trailing whitespace @@ -1139,7 +1129,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget, } } } else - scsi_destroy_sdev(sdev); + __scsi_remove_device(sdev); out: return res; } @@ -1500,7 +1490,7 @@ static int scsi_report_lun_scan(struct scsi_target *starget, int bflags, /* * the sdev we used didn't appear in the report luns scan */ - scsi_destroy_sdev(sdev); + __scsi_remove_device(sdev); return ret; } @@ -1710,7 +1700,7 @@ static void scsi_sysfs_add_devices(struct Scsi_Host *shost) shost_for_each_device(sdev, shost) { if (!scsi_host_scan_allowed(shost) || scsi_sysfs_add_sdev(sdev) != 0) - scsi_destroy_sdev(sdev); + __scsi_remove_device(sdev); } } @@ -1943,7 +1933,7 @@ void scsi_free_host_dev(struct scsi_device *sdev) { BUG_ON(sdev->id != sdev->host->this_id); - scsi_destroy_sdev(sdev); + __scsi_remove_device(sdev); } EXPORT_SYMBOL(scsi_free_host_dev); diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 5c7eb63a19d..392d8db3390 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -854,82 +854,73 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev) transport_configure_device(&starget->dev); error = device_add(&sdev->sdev_gendev); if (error) { - put_device(sdev->sdev_gendev.parent); printk(KERN_INFO "error 1\n"); - return error; + goto out_remove; } error = device_add(&sdev->sdev_dev); if (error) { printk(KERN_INFO "error 2\n"); - goto clean_device; + device_del(&sdev->sdev_gendev); + goto out_remove; } + transport_add_device(&sdev->sdev_gendev); + sdev->is_visible = 1; /* create queue files, which may be writable, depending on the host */ if (sdev->host->hostt->change_queue_depth) error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw); else error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_depth); - if (error) { - __scsi_remove_device(sdev); - goto out; - } + if (error) + goto out_remove; + if (sdev->host->hostt->change_queue_type) error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_type_rw); else error = device_create_file(&sdev->sdev_gendev, &dev_attr_queue_type); - if (error) { - __scsi_remove_device(sdev); - goto out; - } + if (error) + goto out_remove; error = bsg_register_queue(rq, &sdev->sdev_gendev, NULL, NULL); if (error) + /* we're treating error on bsg register as non-fatal, + * so pretend nothing went wrong */ sdev_printk(KERN_INFO, sdev, "Failed to register bsg queue, errno=%d\n", error); - /* we're treating error on bsg register as non-fatal, so pretend - * nothing went wrong */ - error = 0; - /* add additional host specific attributes */ if (sdev->host->hostt->sdev_attrs) { for (i = 0; sdev->host->hostt->sdev_attrs[i]; i++) { error = device_create_file(&sdev->sdev_gendev, sdev->host->hostt->sdev_attrs[i]); - if (error) { - __scsi_remove_device(sdev); - goto out; - } + if (error) + goto out_remove; } } - transport_add_device(&sdev->sdev_gendev); - out: - return error; - - clean_device: - scsi_device_set_state(sdev, SDEV_CANCEL); - - device_del(&sdev->sdev_gendev); - transport_destroy_device(&sdev->sdev_gendev); - put_device(&sdev->sdev_dev); - put_device(&sdev->sdev_gendev); + return 0; + out_remove: + __scsi_remove_device(sdev); return error; + } void __scsi_remove_device(struct scsi_device *sdev) { struct device *dev = &sdev->sdev_gendev; - if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) - return; + if (sdev->is_visible) { + if (scsi_device_set_state(sdev, SDEV_CANCEL) != 0) + return; - bsg_unregister_queue(sdev->request_queue); - device_unregister(&sdev->sdev_dev); - transport_remove_device(dev); - device_del(dev); + bsg_unregister_queue(sdev->request_queue); + device_unregister(&sdev->sdev_dev); + transport_remove_device(dev); + device_del(dev); + } else + put_device(&sdev->sdev_dev); scsi_device_set_state(sdev, SDEV_DEL); if (sdev->host->hostt->slave_destroy) sdev->host->hostt->slave_destroy(sdev); diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 9af48cbf003..f097ae340bc 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -145,6 +145,7 @@ struct scsi_device { unsigned retry_hwerror:1; /* Retry HARDWARE_ERROR */ unsigned last_sector_bug:1; /* do not use multisector accesses on SD_LAST_BUGGY_SECTORS */ + unsigned is_visible:1; /* is the device visible in sysfs */ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ struct list_head event_list; /* asserted events */ -- GitLab From 4e46bf89972b9d98a9f282a9fed2359756a5e34e Mon Sep 17 00:00:00 2001 From: Alexey Kuznetsov Date: Tue, 17 Nov 2009 14:10:11 -0800 Subject: [PATCH 1078/1165] [SCSI] fix crash when disconnecting usb storage __scsi_remove_device() in scsi_forget_host() is executed out of scan_mutex and races with scsi_destroy_sdev() <- scsi_sysfs_add_devices() <- scsi_finish_async_scan(). The result is use after free and/or double free, oops. The fix is simple, move scsi_forget_host() under scan_mutex. scsi_forget_host() is just sequence of __scsi_remove_device(). All another calls of __scsi_remove_device() are made under scan_mutex. So that it is safe. Signed-off-by: Alexey Kuznetsov Signed-off-by: Denis V. Lunev Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/hosts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 5fd2da494d0..c968cc31cd8 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -164,8 +164,8 @@ void scsi_remove_host(struct Scsi_Host *shost) return; } spin_unlock_irqrestore(shost->host_lock, flags); - mutex_unlock(&shost->scan_mutex); scsi_forget_host(shost); + mutex_unlock(&shost->scan_mutex); scsi_proc_host_rm(shost); spin_lock_irqsave(shost->host_lock, flags); -- GitLab From 3addbb8075c00e2a2408c192bd1002dead26b2aa Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 5 Nov 2009 13:26:32 -0300 Subject: [PATCH 1079/1165] V4L/DVB (13321): radio-gemtek-pci: fix double mutex_lock Double mutexlock found by the Linux Driver Verification project and reported by Alexander Strakh. Signed-off-by: Hans Verkuil CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-gemtek-pci.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c index c3f579de6e7..c6cf1166186 100644 --- a/drivers/media/radio/radio-gemtek-pci.c +++ b/drivers/media/radio/radio-gemtek-pci.c @@ -181,12 +181,10 @@ static void gemtek_pci_mute(struct gemtek_pci *card) static void gemtek_pci_unmute(struct gemtek_pci *card) { - mutex_lock(&card->lock); if (card->mute) { gemtek_pci_setfrequency(card, card->current_frequency); card->mute = false; } - mutex_unlock(&card->lock); } static int gemtek_pci_getsignal(struct gemtek_pci *card) -- GitLab From f39c1ab3c3878f1a50ca129e55d17ae63215fcbe Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 9 Nov 2009 16:11:34 -0300 Subject: [PATCH 1080/1165] V4L/DVB (13343): v4l: add more missing linux/sched.h includes Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mx1_camera.c | 1 + drivers/media/video/mx3_camera.c | 1 + drivers/media/video/sh_mobile_ceu_camera.c | 1 + drivers/media/video/videobuf-dma-contig.c | 1 + 4 files changed, 4 insertions(+) diff --git a/drivers/media/video/mx1_camera.c b/drivers/media/video/mx1_camera.c index 5f37952c75c..72802291e81 100644 --- a/drivers/media/video/mx1_camera.c +++ b/drivers/media/video/mx1_camera.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/media/video/mx3_camera.c b/drivers/media/video/mx3_camera.c index dff2e5e2d8c..7db82bdf6f3 100644 --- a/drivers/media/video/mx3_camera.c +++ b/drivers/media/video/mx3_camera.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 2f78b4f263f..55afe3e98e1 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c index 635ffc7b039..c3065c4bcba 100644 --- a/drivers/media/video/videobuf-dma-contig.c +++ b/drivers/media/video/videobuf-dma-contig.c @@ -19,6 +19,7 @@ #include #include #include +#include #include struct videobuf_dma_contig_memory { -- GitLab From 64ff9ba5f1d771e8405ec766c31f6b32c9708285 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 9 Nov 2009 16:12:37 -0300 Subject: [PATCH 1081/1165] V4L/DVB (13344): soc-camera: properly initialise the device object when reusing Commit ef373189f62413803b7b816c972fc154c488cdc0 "fix use-after-free Oops, resulting from a driver-core API change" fixed the Oops, but didn't correct missing device object initialisation. This patch makes unloading and reloading of soc-camera host- and client-drivers possible again. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/soc_camera.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 36e617bd13c..95fdeb23c2c 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -1097,6 +1097,13 @@ static int default_s_crop(struct soc_camera_device *icd, struct v4l2_crop *a) return v4l2_subdev_call(sd, video, s_crop, a); } +static void soc_camera_device_init(struct device *dev, void *pdata) +{ + dev->platform_data = pdata; + dev->bus = &soc_camera_bus_type; + dev->release = dummy_release; +} + int soc_camera_host_register(struct soc_camera_host *ici) { struct soc_camera_host *ix; @@ -1158,6 +1165,7 @@ void soc_camera_host_unregister(struct soc_camera_host *ici) list_for_each_entry(icd, &devices, list) { if (icd->iface == ici->nr) { + void *pdata = icd->dev.platform_data; /* The bus->remove will be called */ device_unregister(&icd->dev); /* @@ -1169,6 +1177,7 @@ void soc_camera_host_unregister(struct soc_camera_host *ici) * device private data. */ memset(&icd->dev, 0, sizeof(icd->dev)); + soc_camera_device_init(&icd->dev, pdata); } } @@ -1200,10 +1209,7 @@ static int soc_camera_device_register(struct soc_camera_device *icd) * man, stay reasonable... */ return -ENOMEM; - icd->devnum = num; - icd->dev.bus = &soc_camera_bus_type; - - icd->dev.release = dummy_release; + icd->devnum = num; icd->use_count = 0; icd->host_priv = NULL; mutex_init(&icd->video_lock); @@ -1311,12 +1317,13 @@ static int __devinit soc_camera_pdrv_probe(struct platform_device *pdev) icd->iface = icl->bus_id; icd->pdev = &pdev->dev; platform_set_drvdata(pdev, icd); - icd->dev.platform_data = icl; ret = soc_camera_device_register(icd); if (ret < 0) goto escdevreg; + soc_camera_device_init(&icd->dev, icl); + icd->user_width = DEFAULT_WIDTH; icd->user_height = DEFAULT_HEIGHT; -- GitLab From 055e05a08b462feabbd6b7a33fd2b9f1f23d4476 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 9 Nov 2009 16:13:24 -0300 Subject: [PATCH 1082/1165] V4L/DVB (13345): soc-camera: sh_mobile_ceu_camera: call pm_runtime_disable pm_runtime_disable is needed if it failed or removed Signed-off-by: Kuninori Morimoto Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sh_mobile_ceu_camera.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 55afe3e98e1..afdea0d26fc 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1724,10 +1724,12 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) err = soc_camera_host_register(&pcdev->ici); if (err) - goto exit_free_irq; + goto exit_free_clk; return 0; +exit_free_clk: + pm_runtime_disable(&pdev->dev); exit_free_irq: free_irq(pcdev->irq, pcdev); exit_release_mem: @@ -1748,6 +1750,7 @@ static int __devexit sh_mobile_ceu_remove(struct platform_device *pdev) struct sh_mobile_ceu_dev, ici); soc_camera_host_unregister(soc_host); + pm_runtime_disable(&pdev->dev); free_irq(pcdev->irq, pcdev); if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) dma_release_declared_memory(&pdev->dev); -- GitLab From 28f4ddd1e8e341907d8f4f4b9ebf9f441f30420a Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Sun, 4 Oct 2009 12:59:35 -0300 Subject: [PATCH 1083/1165] V4L/DVB (13366): em28xx: fix Reddo DVB-C USB TV Box GPIO Set device GPIOs only once. There is no need for .dvb_gpio to select between analog and digital because device is digital only. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-cards.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index bdb249bd9d5..c0fd5c6feea 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -1584,8 +1584,8 @@ struct em28xx_board em28xx_boards[] = { [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { .name = "Reddo DVB-C USB TV Box", .tuner_type = TUNER_ABSENT, + .tuner_gpio = reddo_dvb_c_usb_box, .has_dvb = 1, - .dvb_gpio = reddo_dvb_c_usb_box, }, }; const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); -- GitLab From 934949d816004ff66e21adbab225e9cb7f20015a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 9 Nov 2009 09:05:11 -0300 Subject: [PATCH 1084/1165] V4L/DVB (13371): davinci: remove stray duplicate config pointer The vpif_config struct was renamed to vpif_display_config, but there is still a stray vpif_config *config pointer in vpif_display.c, preventing it from compiling. Remove this old duplicate pointer. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/davinci/vpif_display.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/video/davinci/vpif_display.c b/drivers/media/video/davinci/vpif_display.c index c015da813dd..d14cfb200ed 100644 --- a/drivers/media/video/davinci/vpif_display.c +++ b/drivers/media/video/davinci/vpif_display.c @@ -1426,7 +1426,6 @@ static __init int vpif_probe(struct platform_device *pdev) struct vpif_display_config *config; int i, j = 0, k, q, m, err = 0; struct i2c_adapter *i2c_adap; - struct vpif_config *config; struct common_obj *common; struct channel_obj *ch; struct video_device *vfd; -- GitLab From 4b3fa3c486f53ff267505b115ebf611726217da8 Mon Sep 17 00:00:00 2001 From: Olivier Lorin Date: Sat, 3 Oct 2009 19:09:10 -0300 Subject: [PATCH 1085/1165] V4L/DVB (13372a): MAINTAINERS: addition of gspca_gl860 driver MAINTAINERS: addition of gspca_gl860 driver - addition of gspca_gl860 driver Signed-off-by: Olivier Lorin Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index c824b4d6275..4982eb0baed 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2312,6 +2312,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: drivers/media/video/gspca/finepix.c +GSPCA GL860 SUBDRIVER +M: Olivier Lorin +L: linux-media@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git +S: Maintained +F: drivers/media/video/gspca/gl860/ + GSPCA M5602 SUBDRIVER M: Erik Andren L: linux-media@vger.kernel.org -- GitLab From 1b7323965a8c6eee9dc4e345a7ae4bff1dc93149 Mon Sep 17 00:00:00 2001 From: Csaba Henk Date: Fri, 27 Nov 2009 19:30:14 +0530 Subject: [PATCH 1086/1165] fuse: reject O_DIRECT flag also in fuse_create The comment in fuse_open about O_DIRECT: "VFS checks this, but only _after_ ->open()" also holds for fuse_create, however, the same kind of check was missing there. As an impact of this bug, open(newfile, O_RDWR|O_CREAT|O_DIRECT) fails, but a stub newfile will remain if the fuse server handled the implied FUSE_CREATE request appropriately. Other impact: in the above situation ima_file_free() will complain to open/free imbalance if CONFIG_IMA is set. Signed-off-by: Csaba Henk Signed-off-by: Miklos Szeredi Cc: Harshavardhana Cc: stable@kernel.org --- fs/fuse/dir.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 8ada78aade5..4787ae6c5c1 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -385,6 +385,9 @@ static int fuse_create_open(struct inode *dir, struct dentry *entry, int mode, if (fc->no_create) return -ENOSYS; + if (flags & O_DIRECT) + return -EINVAL; + forget_req = fuse_get_req(fc); if (IS_ERR(forget_req)) return PTR_ERR(forget_req); -- GitLab From e9ff5eb2ae018fe2298c68746c873bf828c6b10e Mon Sep 17 00:00:00 2001 From: Anuj Aggarwal Date: Fri, 27 Nov 2009 17:40:58 +0530 Subject: [PATCH 1087/1165] ASoC: AIC23: Fixing infinite loop in resume path This patch fixes two issues: a) Infinite loop in resume function b) Writes to non-existing registers in resume function Cc: stable@kernel.org Signed-off-by: Anuj Aggarwal Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/tlv320aic23.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/codecs/tlv320aic23.c b/sound/soc/codecs/tlv320aic23.c index 6b24d8bb02b..90a0264f753 100644 --- a/sound/soc/codecs/tlv320aic23.c +++ b/sound/soc/codecs/tlv320aic23.c @@ -625,11 +625,10 @@ static int tlv320aic23_resume(struct platform_device *pdev) { struct snd_soc_device *socdev = platform_get_drvdata(pdev); struct snd_soc_codec *codec = socdev->card->codec; - int i; u16 reg; /* Sync reg_cache with the hardware */ - for (reg = 0; reg < ARRAY_SIZE(tlv320aic23_reg); i++) { + for (reg = 0; reg < TLV320AIC23_RESET; reg++) { u16 val = tlv320aic23_read_reg_cache(codec, reg); tlv320aic23_write(codec, reg, val); } -- GitLab From d02b217a719a8c4debf66ea81ea1b95dbb00e265 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 20 Nov 2009 16:16:52 -0300 Subject: [PATCH 1088/1165] V4L/DVB (13412): SMS_SIANO_MDTV should depend on HAS_DMA When building for Sun 3: drivers/built-in.o: In function `smscore_unregister_device': drivers/media/dvb/siano/smscoreapi.c:723: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `smscore_register_device': drivers/media/dvb/siano/smscoreapi.c:365: undefined reference to `dma_alloc_coherent' Signed-off-by: Geert Uytterhoeven Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/siano/Kconfig b/drivers/media/dvb/siano/Kconfig index 8c1aed77ea3..85a222c4eaa 100644 --- a/drivers/media/dvb/siano/Kconfig +++ b/drivers/media/dvb/siano/Kconfig @@ -4,7 +4,7 @@ config SMS_SIANO_MDTV tristate "Siano SMS1xxx based MDTV receiver" - depends on DVB_CORE && INPUT + depends on DVB_CORE && INPUT && HAS_DMA ---help--- Choose Y or M here if you have MDTV receiver with a Siano chipset. -- GitLab From 0bc3518019f917a370935055f07698a4e9b3ea20 Mon Sep 17 00:00:00 2001 From: Robert Lowery Date: Sun, 8 Nov 2009 00:00:11 -0300 Subject: [PATCH 1089/1165] V4L/DVB (13436): cxusb: Fix hang on DViCO FusionHDTV DVB-T Dual Digital 4 (rev 1) Address yet another regression introduced by the introduction of the zl10353 disable_i2c_gate field. djh - I unmangled the patch which apparently got screwed up in the user's email client. Signed-off-by: Robert Lowery Signed-off-by: Devin Heitmueller CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/cxusb.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c index f65591fb7ce..2a53dd096ee 100644 --- a/drivers/media/dvb/dvb-usb/cxusb.c +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -663,6 +663,14 @@ static struct zl10353_config cxusb_zl10353_xc3028_config = { .parallel_ts = 1, }; +static struct zl10353_config cxusb_zl10353_xc3028_config_no_i2c_gate = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, + .parallel_ts = 1, + .disable_i2c_gate_ctrl = 1, +}; + static struct mt352_config cxusb_mt352_xc3028_config = { .demod_address = 0x0f, .if2 = 4560, @@ -894,7 +902,7 @@ static int cxusb_dualdig4_frontend_attach(struct dvb_usb_adapter *adap) cxusb_bluebird_gpio_pulse(adap->dev, 0x02, 1); if ((adap->fe = dvb_attach(zl10353_attach, - &cxusb_zl10353_xc3028_config, + &cxusb_zl10353_xc3028_config_no_i2c_gate, &adap->dev->i2c_adap)) == NULL) return -EIO; -- GitLab From 9807362e4768cf807c9cfad3c10243020365d1ce Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 25 Nov 2009 14:32:57 -0300 Subject: [PATCH 1090/1165] V4L/DVB (13481): sh_mobile_ceu_camera: fix compile warning Trivial fix for this compile warning: v4l/sh_mobile_ceu_camera.c:1789: warning: label 'exit_free_irq' defined but not used Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sh_mobile_ceu_camera.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index afdea0d26fc..9c8b7c7b89e 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1730,7 +1730,6 @@ static int __devinit sh_mobile_ceu_probe(struct platform_device *pdev) exit_free_clk: pm_runtime_disable(&pdev->dev); -exit_free_irq: free_irq(pcdev->irq, pcdev); exit_release_mem: if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) -- GitLab From 361c95119a60adb7f84946af648b7c87cdc55e17 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 26 Nov 2009 12:22:11 -0300 Subject: [PATCH 1091/1165] V4L/DVB (13530): Fix wrong parameter order in memset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Edwin Török found the following: In function ‘memset’, inlined from ‘ir_input_init’ at drivers/media/common/ir-functions.c:67: /home/edwin/builds/linux-2.6/arch/x86/include/asm/string_64.h:61: warning: call to ‘__warn_memset_zero_len’ declared with attribute warning: memset used with constant zero length parameter; this could be due to transposed parameters memset(ir->ir_codes, sizeof(ir->ir_codes), 0); In actual practice the only caller I can find happens to already have cleared the buffer before calling ir_input_init. Signed-off-by: Alan Cox Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/ir-functions.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/common/ir-functions.c b/drivers/media/common/ir-functions.c index 655474b29e2..abd4791acb0 100644 --- a/drivers/media/common/ir-functions.c +++ b/drivers/media/common/ir-functions.c @@ -64,7 +64,7 @@ void ir_input_init(struct input_dev *dev, struct ir_input_state *ir, ir->ir_type = ir_type; - memset(ir->ir_codes, sizeof(ir->ir_codes), 0); + memset(ir->ir_codes, 0, sizeof(ir->ir_codes)); /* * FIXME: This is a temporary workaround to use the new IR tables -- GitLab From 5fdd4baef6195a1f2960e901c8877e2105f832ca Mon Sep 17 00:00:00 2001 From: Andrei Pelinescu-Onciul Date: Sun, 29 Nov 2009 00:14:02 -0800 Subject: [PATCH 1092/1165] sctp: on T3_RTX retransmit all the in-flight chunks When retransmitting due to T3 timeout, retransmit all the in-flight chunks for the corresponding transport/path, including chunks sent less then 1 rto ago. This is the correct behaviour according to rfc4960 section 6.3.3 E3 and "Note: Any DATA chunks that were sent to the address for which the T3-rtx timer expired but did not fit in one MTU (rule E3 above) should be marked for retransmission and sent as soon as cwnd allows (normally, when a SACK arrives). ". This fixes problems when more then one path is present and the T3 retransmission of the first chunk that timeouts stops the T3 timer for the initial active path, leaving all the other in-flight chunks waiting forever or until a new chunk is transmitted on the same path and timeouts (and this will happen only if the cwnd allows sending new chunks, but since cwnd was dropped to MTU by the timeout => it will wait until the first heartbeat). Example: 10 packets in flight, sent at 0.1 s intervals on the primary path. The primary path is down and the first packet timeouts. The first packet is retransmitted on another path, the T3 timer for the primary path is stopped and cwnd is set to MTU. All the other 9 in-flight packets will not be retransmitted (unless more new packets are sent on the primary path which depend on cwnd allowing it, and even in this case the 9 packets will be retransmitted only after a new packet timeouts which even in the best case would be more then RTO). This commit reverts d0ce92910bc04e107b2f3f2048f07e94f570035d and also removes the now unused transport->last_rto, introduced in b6157d8e03e1e780660a328f7183bcbfa4a93a19. p.s The problem is not only when multiple paths are there. It can happen in a single homed environment. If the application stops sending data, it possible to have a hung association. Signed-off-by: Andrei Pelinescu-Onciul Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 1 - net/sctp/outqueue.c | 10 ---------- net/sctp/sm_sideeffect.c | 1 - net/sctp/transport.c | 5 ++--- 4 files changed, 2 insertions(+), 15 deletions(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index cd2e18778f8..0a474568b00 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -893,7 +893,6 @@ struct sctp_transport { */ /* RTO : The current retransmission timeout value. */ unsigned long rto; - unsigned long last_rto; __u32 rtt; /* This is the most recent RTT. */ diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index c9f20e28521..23e5e97aa61 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -423,16 +423,6 @@ void sctp_retransmit_mark(struct sctp_outq *q, if ((reason == SCTP_RTXR_FAST_RTX && (chunk->fast_retransmit == SCTP_NEED_FRTX)) || (reason != SCTP_RTXR_FAST_RTX && !chunk->tsn_gap_acked)) { - /* If this chunk was sent less then 1 rto ago, do not - * retransmit this chunk, but give the peer time - * to acknowlege it. Do this only when - * retransmitting due to T3 timeout. - */ - if (reason == SCTP_RTXR_T3_RTX && - time_before(jiffies, chunk->sent_at + - transport->last_rto)) - continue; - /* RFC 2960 6.2.1 Processing a Received SACK * * C) Any time a DATA chunk is marked for diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 8674d491955..efa516b47e8 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -480,7 +480,6 @@ static void sctp_do_8_2_transport_strike(struct sctp_association *asoc, * that indicates that we have an outstanding HB. */ if (!is_hb || transport->hb_sent) { - transport->last_rto = transport->rto; transport->rto = min((transport->rto * 2), transport->asoc->rto_max); } } diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 3b141bb32fa..37a1184d789 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -74,7 +74,7 @@ static struct sctp_transport *sctp_transport_init(struct sctp_transport *peer, * given destination transport address, set RTO to the protocol * parameter 'RTO.Initial'. */ - peer->last_rto = peer->rto = msecs_to_jiffies(sctp_rto_initial); + peer->rto = msecs_to_jiffies(sctp_rto_initial); peer->rtt = 0; peer->rttvar = 0; peer->srtt = 0; @@ -386,7 +386,6 @@ void sctp_transport_update_rto(struct sctp_transport *tp, __u32 rtt) tp->rto = tp->asoc->rto_max; tp->rtt = rtt; - tp->last_rto = tp->rto; /* Reset rto_pending so that a new RTT measurement is started when a * new data chunk is sent. @@ -602,7 +601,7 @@ void sctp_transport_reset(struct sctp_transport *t) */ t->cwnd = min(4*asoc->pathmtu, max_t(__u32, 2*asoc->pathmtu, 4380)); t->ssthresh = asoc->peer.i.a_rwnd; - t->last_rto = t->rto = asoc->rto_initial; + t->rto = asoc->rto_initial; t->rtt = 0; t->srtt = 0; t->rttvar = 0; -- GitLab From 862f89b3d4c6bf3caab7fc69661fc6e725edd00a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 25 Nov 2009 01:06:37 +0100 Subject: [PATCH 1093/1165] PM: fix irq enable/disable in runtime PM code This patch (as1305) fixes a bug in the irq-enable settings and removes some related overhead in the runtime PM code. In __pm_runtime_resume(), within the scope of the original spin_lock_irq(), we know that irqs are disabled. There's no reason to go through a pair of enable/disable cycles when acquiring and releasing the parent's lock. In __pm_runtime_set_status(), irqs are already disabled when the parent's lock is acquired, and they must remain disabled when it is released. Signed-off-by: Alan Stern Signed-off-by: Rafael J. Wysocki --- drivers/base/power/runtime.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c index a770498a74e..846d89e3d12 100644 --- a/drivers/base/power/runtime.c +++ b/drivers/base/power/runtime.c @@ -328,11 +328,11 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) * necessary. */ parent = dev->parent; - spin_unlock_irq(&dev->power.lock); + spin_unlock(&dev->power.lock); pm_runtime_get_noresume(parent); - spin_lock_irq(&parent->power.lock); + spin_lock(&parent->power.lock); /* * We can resume if the parent's run-time PM is disabled or it * is set to ignore children. @@ -343,9 +343,9 @@ int __pm_runtime_resume(struct device *dev, bool from_wq) if (parent->power.runtime_status != RPM_ACTIVE) retval = -EBUSY; } - spin_unlock_irq(&parent->power.lock); + spin_unlock(&parent->power.lock); - spin_lock_irq(&dev->power.lock); + spin_lock(&dev->power.lock); if (retval) goto out; goto repeat; @@ -777,7 +777,7 @@ int __pm_runtime_set_status(struct device *dev, unsigned int status) } if (parent) { - spin_lock_irq(&parent->power.lock); + spin_lock(&parent->power.lock); /* * It is invalid to put an active child under a parent that is @@ -793,7 +793,7 @@ int __pm_runtime_set_status(struct device *dev, unsigned int status) atomic_inc(&parent->power.child_count); } - spin_unlock_irq(&parent->power.lock); + spin_unlock(&parent->power.lock); if (error) goto out; -- GitLab From 98468efddb101f8a29af974101c17ba513b07be1 Mon Sep 17 00:00:00 2001 From: Roger Oksanen Date: Sun, 29 Nov 2009 17:17:29 -0800 Subject: [PATCH 1094/1165] e100: Use pci pool to work around GFP_ATOMIC order 5 memory allocation failure pci_alloc_consistent uses GFP_ATOMIC allocation that may fail on some systems with limited memory (Bug #14265). pci_pool_alloc allows waiting with GFP_KERNEL. Tested-by: Karol Lewandowski Signed-off-by: Roger Oksanen Signed-off-by: David S. Miller --- drivers/net/e100.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 3c29a20b751..d269a68ce35 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -157,6 +157,7 @@ #include #include #include +#include #include #include #include @@ -602,6 +603,7 @@ struct nic { struct mem *mem; dma_addr_t dma_addr; + struct pci_pool *cbs_pool; dma_addr_t cbs_dma_addr; u8 adaptive_ifs; u8 tx_threshold; @@ -1793,9 +1795,7 @@ static void e100_clean_cbs(struct nic *nic) nic->cb_to_clean = nic->cb_to_clean->next; nic->cbs_avail++; } - pci_free_consistent(nic->pdev, - sizeof(struct cb) * nic->params.cbs.count, - nic->cbs, nic->cbs_dma_addr); + pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr); nic->cbs = NULL; nic->cbs_avail = 0; } @@ -1813,8 +1813,8 @@ static int e100_alloc_cbs(struct nic *nic) nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL; nic->cbs_avail = 0; - nic->cbs = pci_alloc_consistent(nic->pdev, - sizeof(struct cb) * count, &nic->cbs_dma_addr); + nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL, + &nic->cbs_dma_addr); if (!nic->cbs) return -ENOMEM; @@ -2841,7 +2841,11 @@ static int __devinit e100_probe(struct pci_dev *pdev, DPRINTK(PROBE, ERR, "Cannot register net device, aborting.\n"); goto err_out_free; } - + nic->cbs_pool = pci_pool_create(netdev->name, + nic->pdev, + nic->params.cbs.count * sizeof(struct cb), + sizeof(u32), + 0); DPRINTK(PROBE, INFO, "addr 0x%llx, irq %d, MAC addr %pM\n", (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0), pdev->irq, netdev->dev_addr); @@ -2871,6 +2875,7 @@ static void __devexit e100_remove(struct pci_dev *pdev) unregister_netdev(netdev); e100_free(nic); pci_iounmap(pdev, nic->csr); + pci_pool_destroy(nic->cbs_pool); free_netdev(netdev); pci_release_regions(pdev); pci_disable_device(pdev); -- GitLab From bbf31bf18d34caa87dd01f08bf713635593697f2 Mon Sep 17 00:00:00 2001 From: David Ford Date: Sun, 29 Nov 2009 23:02:22 -0800 Subject: [PATCH 1095/1165] ipv4: additional update of dev_net(dev) to struct *net in ip_fragment.c, NULL ptr OOPS ipv4 ip_frag_reasm(), fully replace 'dev_net(dev)' with 'net', defined previously patched into 2.6.29. Between 2.6.28.10 and 2.6.29, net/ipv4/ip_fragment.c was patched, changing from dev_net(dev) to container_of(...). Unfortunately the goto section (out_fail) on oversized packets inside ip_frag_reasm() didn't get touched up as well. Oversized IP packets cause a NULL pointer dereference and immediate hang. I discovered this running openvasd and my previous email on this is titled: NULL pointer dereference at 2.6.32-rc8:net/ipv4/ip_fragment.c:566 Signed-off-by: David Ford Signed-off-by: David S. Miller --- net/ipv4/ip_fragment.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index 575f9bd51cc..d3fe10be721 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -563,7 +563,7 @@ out_oversize: printk(KERN_INFO "Oversized IP packet from %pI4.\n", &qp->saddr); out_fail: - IP_INC_STATS_BH(dev_net(dev), IPSTATS_MIB_REASMFAILS); + IP_INC_STATS_BH(net, IPSTATS_MIB_REASMFAILS); return err; } -- GitLab From cc098dc705895f6b0109b7e8e026ac2b8ae1c0a1 Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Sun, 29 Nov 2009 23:12:52 -0800 Subject: [PATCH 1096/1165] r8169: restore mac addr in rtl8169_remove_one and rtl_shutdown The newer chipsets (all PCI-E) are known that they need full power cycle (AC or battery removal) to reset MAC address to a hardwired one. Previous patch to address this problem loads the original MAC address from EEPROM. But it brought other problem for which it is necessary to introduce a new module parameter. However, it might suffice to restore the initial MAC address before shutdown/reboot/kexec and when removing the module. Signed-off-by: Ivan Vecera Signed-off-by: David S. Miller --- drivers/net/r8169.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index b9221bdc718..0fe2fc90f20 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -3235,6 +3235,10 @@ static void __devexit rtl8169_remove_one(struct pci_dev *pdev) flush_scheduled_work(); unregister_netdev(dev); + + /* restore original MAC address */ + rtl_rar_set(tp, dev->perm_addr); + rtl_disable_msi(pdev, tp); rtl8169_release_board(pdev, dev, tp->mmio_addr); pci_set_drvdata(pdev, NULL); @@ -4881,6 +4885,9 @@ static void rtl_shutdown(struct pci_dev *pdev) rtl8169_net_suspend(dev); + /* restore original MAC address */ + rtl_rar_set(tp, dev->perm_addr); + spin_lock_irq(&tp->lock); rtl8169_asic_down(ioaddr); -- GitLab From 6c53b1b15e222244358d3cbbefd2a13920faa352 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Sun, 29 Nov 2009 23:14:45 -0800 Subject: [PATCH 1097/1165] smsc9420: prevent BUG() if ethtool is called with interface down This patch fixes a null pointer dereference BUG() if ethtool is used on an smsc9420 interface while it is down, because the phy_dev is only allocated while the interface is up. Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/smsc9420.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c index b4909a2dec6..0f790927623 100644 --- a/drivers/net/smsc9420.c +++ b/drivers/net/smsc9420.c @@ -252,6 +252,9 @@ static int smsc9420_ethtool_get_settings(struct net_device *dev, { struct smsc9420_pdata *pd = netdev_priv(dev); + if (!pd->phy_dev) + return -ENODEV; + cmd->maxtxpkt = 1; cmd->maxrxpkt = 1; return phy_ethtool_gset(pd->phy_dev, cmd); @@ -262,6 +265,9 @@ static int smsc9420_ethtool_set_settings(struct net_device *dev, { struct smsc9420_pdata *pd = netdev_priv(dev); + if (!pd->phy_dev) + return -ENODEV; + return phy_ethtool_sset(pd->phy_dev, cmd); } @@ -290,6 +296,10 @@ static void smsc9420_ethtool_set_msglevel(struct net_device *netdev, u32 data) static int smsc9420_ethtool_nway_reset(struct net_device *netdev) { struct smsc9420_pdata *pd = netdev_priv(netdev); + + if (!pd->phy_dev) + return -ENODEV; + return phy_start_aneg(pd->phy_dev); } @@ -312,6 +322,10 @@ smsc9420_ethtool_getregs(struct net_device *dev, struct ethtool_regs *regs, for (i = 0; i < 0x100; i += (sizeof(u32))) data[j++] = smsc9420_reg_read(pd, i); + // cannot read phy registers if the net device is down + if (!phy_dev) + return; + for (i = 0; i <= 31; i++) data[j++] = smsc9420_mii_read(phy_dev->bus, phy_dev->addr, i); } -- GitLab From d5ccd67bb77ced5249067d05171992a7d5020393 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sat, 28 Nov 2009 00:13:23 +0000 Subject: [PATCH 1098/1165] NET: smc91x: Fix irq flags smc91x.h defines SMC_IRQ_FLAGS to be -1 when it wants the interrupt flags to be taken from the resource structure. However, d280ead changed this to checking for non-zero resource flags. Unfortunately, this means that on some platforms, we end up passing '-1' to request_irq rather than the desired result. Combine the two conditions into one so that the IRQ flags are taken from the resource if either SMC_IRQ_FLAGS is -1 or the resource flags specify an interrupt trigger. This restores network on at least the Versatile platform. Signed-off-by: Russell King Acked-by: Eric Miao Signed-off-by: David S. Miller --- drivers/net/smc91x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 05c91ee6921..f12206bdbb7 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -2283,7 +2283,7 @@ static int __devinit smc_drv_probe(struct platform_device *pdev) ndev->irq = ires->start; - if (ires->flags & IRQF_TRIGGER_MASK) + if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK) irq_flags = ires->flags & IRQF_TRIGGER_MASK; ret = smc_request_attrib(pdev, ndev); -- GitLab From 3c91c7ae84966f992429e1e128c4936f22b89064 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sat, 28 Nov 2009 13:57:00 +0000 Subject: [PATCH 1099/1165] ep93xx-eth: check for zero MAC address on probe, not on device open If we happen to have registered the driver without passing a MAC address, we will print a zero MAC address and register the interface with this invalid address, this is confusin. This patch moves the checking of a valid ethernet address and the generation of a random one down from the open function to the probe function. Signed-off-by: Florian Fainelli Acked-by: Lennert Buytenhek Signed-off-by: David S. Miller --- drivers/net/arm/ep93xx_eth.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/arm/ep93xx_eth.c index 2be49c81799..b25467ac895 100644 --- a/drivers/net/arm/ep93xx_eth.c +++ b/drivers/net/arm/ep93xx_eth.c @@ -628,15 +628,6 @@ static int ep93xx_open(struct net_device *dev) if (ep93xx_alloc_buffers(ep)) return -ENOMEM; - if (is_zero_ether_addr(dev->dev_addr)) { - random_ether_addr(dev->dev_addr); - printk(KERN_INFO "%s: generated random MAC address " - "%.2x:%.2x:%.2x:%.2x:%.2x:%.2x.\n", dev->name, - dev->dev_addr[0], dev->dev_addr[1], - dev->dev_addr[2], dev->dev_addr[3], - dev->dev_addr[4], dev->dev_addr[5]); - } - napi_enable(&ep->napi); if (ep93xx_start_hw(dev)) { @@ -877,6 +868,9 @@ static int ep93xx_eth_probe(struct platform_device *pdev) ep->mii.mdio_write = ep93xx_mdio_write; ep->mdc_divisor = 40; /* Max HCLK 100 MHz, min MDIO clk 2.5 MHz. */ + if (is_zero_ether_addr(dev->dev_addr)) + random_ether_addr(dev->dev_addr); + err = register_netdev(dev); if (err) { dev_err(&pdev->dev, "Failed to register netdev\n"); -- GitLab From 40be261dfd8bfba4baeff40168d44a6a4450ace1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 29 Nov 2009 06:02:55 +0000 Subject: [PATCH 1100/1165] wan: cosa: drop chan->wsem on error path The other paths all drop chan->wsem. This was found by a static checker (smatch). Signed-off-by: Dan Carpenter Acked-by: Jan "Yenya" Kasprzak Signed-off-by: David S. Miller --- drivers/net/wan/cosa.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index e2c33c06190..8e25ca7080c 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -907,6 +907,7 @@ static ssize_t cosa_write(struct file *file, current->state = TASK_RUNNING; chan->tx_status = 1; spin_unlock_irqrestore(&cosa->lock, flags); + up(&chan->wsem); return -ERESTARTSYS; } } -- GitLab From 0cae200eec6330cd2c20b24279597be1da50dc93 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 30 Nov 2009 00:13:28 -0800 Subject: [PATCH 1101/1165] b44: Fix wedge when using netconsole. Fixes kernel bugzilla #14691 Due to the way netpoll works, it is perfectly legal to see NAPI already scheduled when new device events are pending in b44_interrupt(). So logging a message about it is wrong and in fact harmful. Based upon a patch by Andreas Mohr. Signed-off-by: David S. Miller --- drivers/net/b44.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/b44.c b/drivers/net/b44.c index e046943ef29..2a9132343b6 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -912,9 +912,6 @@ static irqreturn_t b44_interrupt(int irq, void *dev_id) bp->istat = istat; __b44_disable_ints(bp); __napi_schedule(&bp->napi); - } else { - printk(KERN_ERR PFX "%s: Error, poll already scheduled\n", - dev->name); } irq_ack: -- GitLab From 4acd57c3de62374fe5bb52e5cd24538190f4eab2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 29 Nov 2009 16:39:52 +0000 Subject: [PATCH 1102/1165] ALSA: AACI: fix AC97 multiple-open bug Signed-off-by: Russell King Cc: Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 1f0f8213e2d..1cb7c282a1f 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -504,6 +504,10 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, int err; aaci_pcm_hw_free(substream); + if (aacirun->pcm_open) { + snd_ac97_pcm_close(aacirun->pcm); + aacirun->pcm_open = 0; + } err = devdma_hw_alloc(NULL, substream, params_buffer_bytes(params)); -- GitLab From 8ee763b9c82c6ca0a59a7271ce4fa29d7baf5c09 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 29 Nov 2009 16:39:59 +0000 Subject: [PATCH 1103/1165] ALSA: AACI: fix recording bug pcm->r[1].slots is the double rate slot information, not the capture information. For capture, 'pcm' will already be the capture ac97 pcm structure. Signed-off-by: Russell King Cc: Signed-off-by: Takashi Iwai --- sound/arm/aaci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index 1cb7c282a1f..6c160a038b2 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -521,7 +521,7 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, else err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), params_channels(params), - aacirun->pcm->r[1].slots); + aacirun->pcm->r[0].slots); if (err) goto out; -- GitLab From 33a932d14323b957a4e17a6c8428d3f048a30822 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 28 Nov 2009 20:33:11 +0000 Subject: [PATCH 1104/1165] parisc: fix unwind with recent gcc versions kernel unwinding is broken with gcc >= 4.x. Part of the problem is that binutils seems very sensitive to where the unwind information is stored. Signed-off-by: Helge Deller Signed-off-by: Kyle McMartin Signed-off-by: Linus Torvalds --- arch/parisc/kernel/unwind.c | 2 +- arch/parisc/kernel/vmlinux.lds.S | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/parisc/kernel/unwind.c b/arch/parisc/kernel/unwind.c index 69dad5a850a..a36799e8569 100644 --- a/arch/parisc/kernel/unwind.c +++ b/arch/parisc/kernel/unwind.c @@ -28,7 +28,7 @@ #define dbg(x...) #endif -#define KERNEL_START (KERNEL_BINARY_TEXT_START - 0x1000) +#define KERNEL_START (KERNEL_BINARY_TEXT_START) extern struct unwind_table_entry __start___unwind[]; extern struct unwind_table_entry __stop___unwind[]; diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index fda4baa059b..9dab4a4e09f 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -78,9 +78,6 @@ SECTIONS */ . = ALIGN(PAGE_SIZE); data_start = .; - EXCEPTION_TABLE(16) - - NOTES /* unwind info */ .PARISC.unwind : { @@ -89,6 +86,9 @@ SECTIONS __stop___unwind = .; } + EXCEPTION_TABLE(16) + NOTES + /* Data */ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE) -- GitLab From e3a41d7b99e7f97d9a50bec2a8f4eb237ce1d504 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Tue, 24 Nov 2009 06:34:03 +0100 Subject: [PATCH 1105/1165] .gitignore: Add bzip2 compressed files We can have bzip2 compressed images nowadays. Signed-off-by: Gertjan van Wingerde Signed-off-by: Linus Torvalds --- .gitignore | 1 + 1 file changed, 1 insertion(+) diff --git a/.gitignore b/.gitignore index b93fb7eff94..946c7ec5c92 100644 --- a/.gitignore +++ b/.gitignore @@ -25,6 +25,7 @@ *.elf *.bin *.gz +*.bz2 *.lzma *.patch *.gcno -- GitLab From 4253119acf412fd686ef4bd8749b5a4d70ea3a51 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 20 Nov 2009 09:15:51 +0100 Subject: [PATCH 1106/1165] mac80211: fix two remote exploits Lennert Buytenhek noticed a remotely triggerable problem in mac80211, which is due to some code shuffling I did that ended up changing the order in which things were done -- this was in commit d75636ef9c1af224f1097941879d5a8db7cd04e5 Author: Johannes Berg Date: Tue Feb 10 21:25:53 2009 +0100 mac80211: RX aggregation: clean up stop session The problem is that the BUG_ON moved before the various checks, and as such can be triggered. As the comment indicates, the BUG_ON can be removed since the ampdu_action callback must already exist when the state is OPERATIONAL. A similar code path leads to a WARN_ON in ieee80211_stop_tx_ba_session, which can also be removed. Cc: stable@kernel.org [2.6.29+] Cc: Lennert Buytenhek Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/agg-rx.c | 4 ---- net/mac80211/agg-tx.c | 2 +- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/net/mac80211/agg-rx.c b/net/mac80211/agg-rx.c index bc064d7933f..ce8e0e772ba 100644 --- a/net/mac80211/agg-rx.c +++ b/net/mac80211/agg-rx.c @@ -85,10 +85,6 @@ void ieee80211_sta_stop_rx_ba_session(struct ieee80211_sub_if_data *sdata, u8 *r struct ieee80211_local *local = sdata->local; struct sta_info *sta; - /* stop HW Rx aggregation. ampdu_action existence - * already verified in session init so we add the BUG_ON */ - BUG_ON(!local->ops->ampdu_action); - rcu_read_lock(); sta = sta_info_get(local, ra); diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 206fd82f0c7..63224d1ee8d 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -545,7 +545,7 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw, struct sta_info *sta; int ret = 0; - if (WARN_ON(!local->ops->ampdu_action)) + if (!local->ops->ampdu_action) return -EINVAL; if (tid >= STA_TID_NUM) -- GitLab From 827d42c9ac91ddd728e4f4a31fefb906ef2ceff7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 22 Nov 2009 12:28:41 +0100 Subject: [PATCH 1107/1165] mac80211: fix spurious delBA handling Lennert Buytenhek noticed that delBA handling in mac80211 was broken and has remotely triggerable problems, some of which are due to some code shuffling I did that ended up changing the order in which things were done -- this was commit d75636ef9c1af224f1097941879d5a8db7cd04e5 Author: Johannes Berg Date: Tue Feb 10 21:25:53 2009 +0100 mac80211: RX aggregation: clean up stop session and other parts were already present in the original commit d92684e66091c0f0101819619b315b4bb8b5bcc5 Author: Ron Rindjunsky Date: Mon Jan 28 14:07:22 2008 +0200 mac80211: A-MPDU Tx add delBA from recipient support The first problem is that I moved a BUG_ON before various checks -- thereby making it possible to hit. As the comment indicates, the BUG_ON can be removed since the ampdu_action callback must already exist when the state is != IDLE. The second problem isn't easily exploitable but there's a race condition due to unconditionally setting the state to OPERATIONAL when a delBA frame is received, even when no aggregation session was ever initiated. All the drivers accept stopping the session even then, but that opens a race window where crashes could happen before the driver accepts it. Right now, a WARN_ON may happen with non-HT drivers, while the race opens only for HT drivers. For this case, there are two things necessary to fix it: 1) don't process spurious delBA frames, and be more careful about the session state; don't drop the lock 2) HT drivers need to be prepared to handle a session stop even before the session was really started -- this is true for all drivers (that support aggregation) but iwlwifi which can be fixed easily. The other HT drivers (ath9k and ar9170) are behaving properly already. Reported-by: Lennert Buytenhek Cc: stable@kernel.org Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-tx.c | 10 +++++++++- include/net/mac80211.h | 6 ++++++ net/mac80211/agg-tx.c | 15 +++++++-------- net/mac80211/ht.c | 8 +++----- net/mac80211/ieee80211_i.h | 2 ++ 5 files changed, 27 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c index fb9bcfa6d94..b7e196e3c8d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-tx.c @@ -1277,8 +1277,16 @@ int iwl_tx_agg_stop(struct iwl_priv *priv , const u8 *ra, u16 tid) return -ENXIO; } + if (priv->stations[sta_id].tid[tid].agg.state == + IWL_EMPTYING_HW_QUEUE_ADDBA) { + IWL_DEBUG_HT(priv, "AGG stop before setup done\n"); + ieee80211_stop_tx_ba_cb_irqsafe(priv->hw, ra, tid); + priv->stations[sta_id].tid[tid].agg.state = IWL_AGG_OFF; + return 0; + } + if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_ON) - IWL_WARN(priv, "Stopping AGG while state not IWL_AGG_ON\n"); + IWL_WARN(priv, "Stopping AGG while state not ON or starting\n"); tid_data = &priv->stations[sta_id].tid[tid]; ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c75b960c8ac..998c30fc898 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1283,6 +1283,12 @@ enum ieee80211_filter_flags { * * These flags are used with the ampdu_action() callback in * &struct ieee80211_ops to indicate which action is needed. + * + * Note that drivers MUST be able to deal with a TX aggregation + * session being stopped even before they OK'ed starting it by + * calling ieee80211_start_tx_ba_cb(_irqsafe), because the peer + * might receive the addBA frame and send a delBA right away! + * * @IEEE80211_AMPDU_RX_START: start Rx aggregation * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation * @IEEE80211_AMPDU_TX_START: start Tx aggregation diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 63224d1ee8d..89e238b001d 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -123,13 +123,18 @@ void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u1 ieee80211_tx_skb(sdata, skb, 0); } -static int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, - enum ieee80211_back_parties initiator) +int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, + enum ieee80211_back_parties initiator) { struct ieee80211_local *local = sta->local; int ret; u8 *state; +#ifdef CONFIG_MAC80211_HT_DEBUG + printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n", + sta->sta.addr, tid); +#endif /* CONFIG_MAC80211_HT_DEBUG */ + state = &sta->ampdu_mlme.tid_state_tx[tid]; if (*state == HT_AGG_STATE_OPERATIONAL) @@ -143,7 +148,6 @@ static int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, /* HW shall not deny going back to legacy */ if (WARN_ON(ret)) { - *state = HT_AGG_STATE_OPERATIONAL; /* * We may have pending packets get stuck in this case... * Not bothering with a workaround for now. @@ -525,11 +529,6 @@ int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, goto unlock; } -#ifdef CONFIG_MAC80211_HT_DEBUG - printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n", - sta->sta.addr, tid); -#endif /* CONFIG_MAC80211_HT_DEBUG */ - ret = ___ieee80211_stop_tx_ba_session(sta, tid, initiator); unlock: diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 48ef1a282b9..cdc58e61d92 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -141,7 +141,6 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_mgmt *mgmt, size_t len) { - struct ieee80211_local *local = sdata->local; u16 tid, params; u16 initiator; @@ -161,10 +160,9 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, WLAN_BACK_INITIATOR, 0); else { /* WLAN_BACK_RECIPIENT */ spin_lock_bh(&sta->lock); - sta->ampdu_mlme.tid_state_tx[tid] = - HT_AGG_STATE_OPERATIONAL; + if (sta->ampdu_mlme.tid_state_tx[tid] & HT_ADDBA_REQUESTED_MSK) + ___ieee80211_stop_tx_ba_session(sta, tid, + WLAN_BACK_RECIPIENT); spin_unlock_bh(&sta->lock); - ieee80211_stop_tx_ba_session(&local->hw, sta->sta.addr, tid, - WLAN_BACK_RECIPIENT); } } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index a910bf1f092..10d316e455d 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1091,6 +1091,8 @@ void ieee80211_process_addba_request(struct ieee80211_local *local, int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, enum ieee80211_back_parties initiator); +int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, + enum ieee80211_back_parties initiator); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, -- GitLab From 7924326fef03e9992c118a42aa148c4f824a4097 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 30 Nov 2009 17:37:20 -0200 Subject: [PATCH 1108/1165] staging/go7007: Fix compilation by re-adding the missing s2250-loader.h As pointed by Stefan Lippers-Hollmann , Commit: fd9a40da1db372833e1af6397d2f6c94ceff3dad broke s2250 compilation. This patch re-adds the missing s2250-loader.h Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/go7007/s2250-loader.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 drivers/staging/go7007/s2250-loader.h diff --git a/drivers/staging/go7007/s2250-loader.h b/drivers/staging/go7007/s2250-loader.h new file mode 100644 index 00000000000..b7c301af16c --- /dev/null +++ b/drivers/staging/go7007/s2250-loader.h @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2005-2006 Micronas USA Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +#ifndef _S2250_LOADER_H_ +#define _S2250_LOADER_H_ + +extern int s2250loader_init(void); +extern void s2250loader_cleanup(void); + +#endif -- GitLab From e49bd72f9cfba9f0d0204f961d036cd0c7e37f2e Mon Sep 17 00:00:00 2001 From: Pete Eberlein Date: Sun, 15 Nov 2009 08:14:14 -0300 Subject: [PATCH 1109/1165] V4L/DVB (13372): staging/go7007: fix mutex function usage for s2250 Fix mutex function usage, which was overlooked in a previous patch. Signed-off-by: Pete Eberlein Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/go7007/s2250-board.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/staging/go7007/s2250-board.c b/drivers/staging/go7007/s2250-board.c index 8c85a9c3665..f4a6541c3e6 100644 --- a/drivers/staging/go7007/s2250-board.c +++ b/drivers/staging/go7007/s2250-board.c @@ -261,7 +261,7 @@ static int read_reg_fp(struct i2c_client *client, u16 addr, u16 *val) memset(buf, 0xcd, 6); usb = go->hpi_context; - if (down_interruptible(&usb->i2c_lock) != 0) { + if (mutex_lock_interruptible(&usb->i2c_lock) != 0) { printk(KERN_INFO "i2c lock failed\n"); kfree(buf); return -EINTR; @@ -270,7 +270,7 @@ static int read_reg_fp(struct i2c_client *client, u16 addr, u16 *val) kfree(buf); return -EFAULT; } - up(&usb->i2c_lock); + mutex_unlock(&usb->i2c_lock); *val = (buf[0] << 8) | buf[1]; kfree(buf); -- GitLab From 04d8a9db89f00dee78d792d094dc573784ead643 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 30 Nov 2009 15:37:25 -0500 Subject: [PATCH 1110/1165] arch/alpha/kernel/sys_ruffian.c: Use DIV_ROUND_CLOSEST The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @haskernel@ @@ @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // Signed-off-by: Julia Lawall Cc: Ivan Kokshaysky Cc: Richard Henderson Signed-off-by: Matt Turner --- arch/alpha/kernel/sys_ruffian.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/alpha/kernel/sys_ruffian.c b/arch/alpha/kernel/sys_ruffian.c index d9f9cfeb993..8de1046fe91 100644 --- a/arch/alpha/kernel/sys_ruffian.c +++ b/arch/alpha/kernel/sys_ruffian.c @@ -66,7 +66,7 @@ ruffian_init_irq(void) common_init_isa_dma(); } -#define RUFFIAN_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ) +#define RUFFIAN_LATCH DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ) static void __init ruffian_init_rtc(void) -- GitLab From cc9a2c8301683f73b7e0d1fc2cb5159110f3469f Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 30 Nov 2009 15:38:19 -0500 Subject: [PATCH 1111/1165] arch/alpha/kernel: Add kmalloc NULL tests Check that the result of kmalloc is not NULL before passing it to other functions. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // Signed-off-by: Julia Lawall Cc: Ivan Kokshaysky Cc: Richard Henderson Signed-off-by: Matt Turner --- arch/alpha/kernel/core_marvel.c | 2 ++ arch/alpha/kernel/core_titan.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c index 8e059e58b0a..53dd2f1a53a 100644 --- a/arch/alpha/kernel/core_marvel.c +++ b/arch/alpha/kernel/core_marvel.c @@ -1103,6 +1103,8 @@ marvel_agp_info(void) * Allocate the info structure. */ agp = kmalloc(sizeof(*agp), GFP_KERNEL); + if (!agp) + return NULL; /* * Fill it in. diff --git a/arch/alpha/kernel/core_titan.c b/arch/alpha/kernel/core_titan.c index 76686497b1e..219bf271c0b 100644 --- a/arch/alpha/kernel/core_titan.c +++ b/arch/alpha/kernel/core_titan.c @@ -757,6 +757,8 @@ titan_agp_info(void) * Allocate the info structure. */ agp = kmalloc(sizeof(*agp), GFP_KERNEL); + if (!agp) + return NULL; /* * Fill it in. -- GitLab From c69f677cc852f3f7b2342ab2f1598670a463d576 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 20 Nov 2009 20:48:31 +0100 Subject: [PATCH 1112/1165] fbdev: Migrate mailing lists to vger The fbdev mailing lists at SourceForge have been migrated to a single mailing list at kernel.org: linux-fbdev@vger.kernel.org. Signed-off-by: Geert Uytterhoeven Acked-by: Jean Delvare Signed-off-by: Linus Torvalds --- Documentation/fb/framebuffer.txt | 6 ++---- MAINTAINERS | 28 ++++++++++++++-------------- 2 files changed, 16 insertions(+), 18 deletions(-) diff --git a/Documentation/fb/framebuffer.txt b/Documentation/fb/framebuffer.txt index b3e3a035683..fe79e3c8847 100644 --- a/Documentation/fb/framebuffer.txt +++ b/Documentation/fb/framebuffer.txt @@ -312,10 +312,8 @@ and to the following documentation: 8. Mailing list --------------- -There are several frame buffer device related mailing lists at SourceForge: - - linux-fbdev-announce@lists.sourceforge.net, for announcements, - - linux-fbdev-user@lists.sourceforge.net, for generic user support, - - linux-fbdev-devel@lists.sourceforge.net, for project developers. +There is a frame buffer device related mailing list at kernel.org: +linux-fbdev@vger.kernel.org. Point your web browser to http://sourceforge.net/projects/linux-fbdev/ for subscription information and archive browsing. diff --git a/MAINTAINERS b/MAINTAINERS index c824b4d6275..5726ffc8c43 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1027,7 +1027,7 @@ F: drivers/serial/atmel_serial.c ATMEL LCDFB DRIVER M: Nicolas Ferre -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/atmel_lcdfb.c F: include/video/atmel_lcdc.h @@ -2113,7 +2113,7 @@ F: drivers/net/wan/dlci.c F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org W: http://linux-fbdev.sourceforge.net/ S: Orphan F: Documentation/fb/ @@ -2136,7 +2136,7 @@ F: drivers/i2c/busses/i2c-cpm.c FREESCALE IMX / MXC FRAMEBUFFER DRIVER M: Sascha Hauer -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/plat-mxc/include/mach/imxfb.h @@ -2635,7 +2635,7 @@ S: Supported F: security/integrity/ima/ IMS TWINTURBO FRAMEBUFFER DRIVER -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Orphan F: drivers/video/imsttfb.c @@ -2670,14 +2670,14 @@ F: drivers/input/ INTEL FRAMEBUFFER DRIVER (excluding 810 and 815) M: Sylvain Meyer -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: Documentation/fb/intelfb.txt F: drivers/video/intelfb/ INTEL 810/815 FRAMEBUFFER DRIVER M: Antonino Daplas -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/i810/ @@ -3391,7 +3391,7 @@ S: Supported MATROX FRAMEBUFFER DRIVER M: Petr Vandrovec -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/matrox/matroxfb_* F: include/linux/matroxfb.h @@ -3778,7 +3778,7 @@ F: fs/ntfs/ NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER M: Antonino Daplas -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/riva/ F: drivers/video/nvidia/ @@ -3813,7 +3813,7 @@ F: sound/soc/omap/ OMAP FRAMEBUFFER SUPPORT M: Imre Deak -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org L: linux-omap@vger.kernel.org S: Maintained F: drivers/video/omap/ @@ -4319,14 +4319,14 @@ F: include/linux/qnxtypes.h RADEON FRAMEBUFFER DISPLAY DRIVER M: Benjamin Herrenschmidt -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/aty/radeon* F: include/linux/radeonfb.h RAGE128 FRAMEBUFFER DISPLAY DRIVER M: Paul Mackerras -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/aty/aty128fb.c @@ -4465,7 +4465,7 @@ F: drivers/net/wireless/rtl818x/rtl8187* S3 SAVAGE FRAMEBUFFER DRIVER M: Antonino Daplas -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/savage/ @@ -5628,7 +5628,7 @@ S: Maintained UVESAFB DRIVER M: Michal Januszewski -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org W: http://dev.gentoo.org/~spock/projects/uvesafb/ S: Maintained F: Documentation/fb/uvesafb.txt @@ -5661,7 +5661,7 @@ F: drivers/mmc/host/via-sdmmc.c VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER M: Joseph Chan M: Scott Fang -L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-fbdev@vger.kernel.org S: Maintained F: drivers/video/via/ -- GitLab From 199bc9ff5ca5e4b3bcaff8927b2983c65f34c263 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 30 Nov 2009 09:06:40 +0000 Subject: [PATCH 1113/1165] jffs2: Fix memory corruption in jffs2_read_inode_range() In 2.6.23 kernel, commit a32ea1e1f925399e0d81ca3f7394a44a6dafa12c ("Fix read/truncate race") fixed a race in the generic code, and as a side effect, now do_generic_file_read() can ask us to readpage() past the i_size. This seems to be correctly handled by the block routines (e.g. block_read_full_page() fills the page with zeroes in case if somebody is trying to read past the last inode's block). JFFS2 doesn't handle this; it assumes that it won't be asked to read pages which don't exist -- and thus that there will be at least _one_ valid 'frag' on the page it's being asked to read. It will fill any holes with the following memset: memset(buf, 0, min(end, frag->ofs + frag->size) - offset); When the 'closest smaller match' returned by jffs2_lookup_node_frag() is actually on a previous page and ends before 'offset', that results in: memset(buf, 0, ); Hopefully, in most cases the corruption is fatal, and quickly causing random oopses, like this: root@10.0.0.4:~/ltp-fs-20090531# ./testcases/kernel/fs/ftest/ftest01 Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xc01cd980 Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01cd980] rb_insert_color+0x38/0x184 LR [c0043978] enqueue_hrtimer+0x88/0xc4 Call Trace: [c6c63b60] [c004f9a8] tick_sched_timer+0xa0/0xe4 (unreliable) [c6c63b80] [c0043978] enqueue_hrtimer+0x88/0xc4 [c6c63b90] [c0043a48] __run_hrtimer+0x94/0xbc [c6c63bb0] [c0044628] hrtimer_interrupt+0x140/0x2b8 [c6c63c10] [c000f8e8] timer_interrupt+0x13c/0x254 [c6c63c30] [c001352c] ret_from_except+0x0/0x14 --- Exception: 901 at memset+0x38/0x5c LR = jffs2_read_inode_range+0x144/0x17c [c6c63cf0] [00000000] (null) (unreliable) This patch fixes the issue, plus fixes all LTP tests on NAND/UBI with JFFS2 filesystem that were failing since 2.6.23 (seems like the bug above also broke the truncation). Reported-By: Anton Vorontsov Tested-By: Anton Vorontsov Signed-off-by: David Woodhouse Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/jffs2/read.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/fs/jffs2/read.c b/fs/jffs2/read.c index cfe05c1966a..3f39be1b045 100644 --- a/fs/jffs2/read.c +++ b/fs/jffs2/read.c @@ -164,12 +164,15 @@ int jffs2_read_inode_range(struct jffs2_sb_info *c, struct jffs2_inode_info *f, /* XXX FIXME: Where a single physical node actually shows up in two frags, we read it twice. Don't do that. */ - /* Now we're pointing at the first frag which overlaps our page */ + /* Now we're pointing at the first frag which overlaps our page + * (or perhaps is before it, if we've been asked to read off the + * end of the file). */ while(offset < end) { D2(printk(KERN_DEBUG "jffs2_read_inode_range: offset %d, end %d\n", offset, end)); - if (unlikely(!frag || frag->ofs > offset)) { + if (unlikely(!frag || frag->ofs > offset || + frag->ofs + frag->size <= offset)) { uint32_t holesize = end - offset; - if (frag) { + if (frag && frag->ofs > offset) { D1(printk(KERN_NOTICE "Eep. Hole in ino #%u fraglist. frag->ofs = 0x%08x, offset = 0x%08x\n", f->inocache->ino, frag->ofs, offset)); holesize = min(holesize, frag->ofs - offset); } -- GitLab From e8105903d78c81119754a42926951d9d17e191ba Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 23 Nov 2009 12:28:53 +0000 Subject: [PATCH 1114/1165] powerpc: Fix DEBUG_HIGHMEM build break from d4515646699 Code was added to mm/higmem.c that depends on several kmap types that powerpc does not support. We add dummy invalid definitions for KM_NMI, KM_NM_PTE, and KM_IRQ_PTE. According to list discussion, this fix should not be needed anymore starting with 2.6.33. The code is commented to this effect so hopefully we will remember to remove this. Signed-off-by: Becky Bruce Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/kmap_types.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/powerpc/include/asm/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h index b6bac6f61c1..916369575c9 100644 --- a/arch/powerpc/include/asm/kmap_types.h +++ b/arch/powerpc/include/asm/kmap_types.h @@ -29,5 +29,16 @@ enum km_type { KM_TYPE_NR }; +/* + * This is a temporary build fix that (so they say on lkml....) should no longer + * be required after 2.6.33, because of changes planned to the kmap code. + * Let's try to remove this cruft then. + */ +#ifdef CONFIG_DEBUG_HIGHMEM +#define KM_NMI (-1) +#define KM_NMI_PTE (-1) +#define KM_IRQ_PTE (-1) +#endif + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_KMAP_TYPES_H */ -- GitLab From 8627b96dd80dca440d91fbb1ec733be25912d0dd Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 18 Nov 2009 14:12:58 +0000 Subject: [PATCH 1115/1165] tty_port: handle the nonblocking open of a dead port corner case Some drivers allow O_NDELAY of a dead port (eg for setserial to work). In that situation we must not try to raise the carrier. Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/char/tty_port.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 2e8552dc5ed..c63f3d33914 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -219,8 +219,11 @@ int tty_port_block_til_ready(struct tty_port *port, /* if non-blocking mode is set we can pass directly to open unless the port has just hung up or is in another error state */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { + if (tty->flags & (1 << TTY_IO_ERROR)) { + port->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + if (filp->f_flags & O_NONBLOCK) { /* Indicate we are open */ if (tty->termios->c_cflag & CBAUD) tty_port_raise_dtr_rts(port); -- GitLab From b037179f7a4fff7bd8279b0568a7dc663ebc9d15 Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Sun, 15 Nov 2009 05:42:18 +0100 Subject: [PATCH 1116/1165] bcm63xx_uart: Fix serial driver compile breakage. The driver missed a small API change while sitting in Ralf's tree, this patch makes it compile again. Signed-off-by: Maxime Bizon Signed-off-by: Greg Kroah-Hartman --- drivers/serial/bcm63xx_uart.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c index beddaa6e906..37ad0c44993 100644 --- a/drivers/serial/bcm63xx_uart.c +++ b/drivers/serial/bcm63xx_uart.c @@ -242,7 +242,7 @@ static void bcm_uart_do_rx(struct uart_port *port) * higher than fifo size anyway since we're much faster than * serial port */ max_count = 32; - tty = port->info->port.tty; + tty = port->state->port.tty; do { unsigned int iestat, c, cstat; char flag; @@ -318,7 +318,7 @@ static void bcm_uart_do_tx(struct uart_port *port) return; } - xmit = &port->info->xmit; + xmit = &port->state->xmit; if (uart_circ_empty(xmit)) goto txq_empty; -- GitLab From 16173c7c2d79da7eb89b41acfdebd74b130f4339 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 24 Nov 2009 10:22:41 +0000 Subject: [PATCH 1117/1165] tty/of_serial: add missing ns16550a id Many boards have a bug-free ns16550 compatible serial port, which we should register as PORT_16550A. This introduces a new value "ns16550a" for the compatible property of of_serial to let a firmware choose that model instead of using the crippled PORT_16550 mode. Reported-by: Alon Ziv Signed-off-by: Michal Simek Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/serial/of_serial.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/serial/of_serial.c b/drivers/serial/of_serial.c index 02406ba6da1..cdf172eda2e 100644 --- a/drivers/serial/of_serial.c +++ b/drivers/serial/of_serial.c @@ -161,6 +161,7 @@ static int of_platform_serial_remove(struct of_device *ofdev) static struct of_device_id __devinitdata of_platform_serial_table[] = { { .type = "serial", .compatible = "ns8250", .data = (void *)PORT_8250, }, { .type = "serial", .compatible = "ns16450", .data = (void *)PORT_16450, }, + { .type = "serial", .compatible = "ns16550a", .data = (void *)PORT_16550A, }, { .type = "serial", .compatible = "ns16550", .data = (void *)PORT_16550, }, { .type = "serial", .compatible = "ns16750", .data = (void *)PORT_16750, }, { .type = "serial", .compatible = "ns16850", .data = (void *)PORT_16850, }, -- GitLab From 8c960e49d8beaca7c5b3967cede225bbba36bf43 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 11 Nov 2009 16:57:03 -0500 Subject: [PATCH 1118/1165] Staging: hv: Fix argument order in incorrect memset invocations in hyperv driver. Nearly every invocation of memset in drivers/staging/hv/StorVsc.c has its arguments the wrong way around. Signed-off-by: Dave Jones Cc: Hank Janssen Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/StorVsc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/staging/hv/StorVsc.c b/drivers/staging/hv/StorVsc.c index 14015c92794..2f7c425896f 100644 --- a/drivers/staging/hv/StorVsc.c +++ b/drivers/staging/hv/StorVsc.c @@ -196,7 +196,7 @@ static int StorVscChannelInit(struct hv_device *Device) * Now, initiate the vsc/vsp initialization protocol on the open * channel */ - memset(request, sizeof(struct storvsc_request_extension), 0); + memset(request, 0, sizeof(struct storvsc_request_extension)); request->WaitEvent = osd_WaitEventCreate(); vstorPacket->Operation = VStorOperationBeginInitialization; @@ -233,7 +233,7 @@ static int StorVscChannelInit(struct hv_device *Device) DPRINT_INFO(STORVSC, "QUERY_PROTOCOL_VERSION_OPERATION..."); /* reuse the packet for version range supported */ - memset(vstorPacket, sizeof(struct vstor_packet), 0); + memset(vstorPacket, 0, sizeof(struct vstor_packet)); vstorPacket->Operation = VStorOperationQueryProtocolVersion; vstorPacket->Flags = REQUEST_COMPLETION_FLAG; @@ -266,7 +266,7 @@ static int StorVscChannelInit(struct hv_device *Device) /* Query channel properties */ DPRINT_INFO(STORVSC, "QUERY_PROPERTIES_OPERATION..."); - memset(vstorPacket, sizeof(struct vstor_packet), 0); + memset(vstorPacket, 0, sizeof(struct vstor_packet)); vstorPacket->Operation = VStorOperationQueryProperties; vstorPacket->Flags = REQUEST_COMPLETION_FLAG; vstorPacket->StorageChannelProperties.PortNumber = @@ -305,7 +305,7 @@ static int StorVscChannelInit(struct hv_device *Device) DPRINT_INFO(STORVSC, "END_INITIALIZATION_OPERATION..."); - memset(vstorPacket, sizeof(struct vstor_packet), 0); + memset(vstorPacket, 0, sizeof(struct vstor_packet)); vstorPacket->Operation = VStorOperationEndInitialization; vstorPacket->Flags = REQUEST_COMPLETION_FLAG; @@ -508,7 +508,7 @@ static int StorVscConnectToVsp(struct hv_device *Device) int ret; storDriver = (struct storvsc_driver_object *)Device->Driver; - memset(&props, sizeof(struct vmstorage_channel_properties), 0); + memset(&props, 0, sizeof(struct vmstorage_channel_properties)); /* Open the channel */ ret = Device->Driver->VmbusChannelInterface.Open(Device, -- GitLab From 5996b3ddc422a16d53b8acf4980d0d6e8b2bf1ed Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Fri, 20 Nov 2009 16:29:17 +0000 Subject: [PATCH 1119/1165] Staging: hv: Fix vmbus event handler bug The flag ENABLE_POLLING is always enabled in original Makefile, but accidently removed during porting to mainline kernel. The patch fixes this bug which can cause stalled network communication. Credit needs to go to Eric Sesterhenn For pointing out a typo in the original code as well. Signed-off-by: Hank Janssen Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/Channel.c | 16 ++++------------ drivers/staging/hv/ChannelMgmt.c | 2 +- 2 files changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/staging/hv/Channel.c b/drivers/staging/hv/Channel.c index d649ee169d9..746370e8211 100644 --- a/drivers/staging/hv/Channel.c +++ b/drivers/staging/hv/Channel.c @@ -611,7 +611,7 @@ void VmbusChannelClose(struct vmbus_channel *Channel) /* Stop callback and cancel the timer asap */ Channel->OnChannelCallback = NULL; - del_timer(&Channel->poll_timer); + del_timer_sync(&Channel->poll_timer); /* Send a closing message */ info = kmalloc(sizeof(*info) + @@ -978,14 +978,10 @@ void VmbusChannelOnChannelEvent(struct vmbus_channel *Channel) { DumpVmbusChannel(Channel); ASSERT(Channel->OnChannelCallback); -#ifdef ENABLE_POLLING - del_timer(&Channel->poll_timer); - Channel->OnChannelCallback(Channel->ChannelCallbackContext); - channel->poll_timer.expires(jiffies + usecs_to_jiffies(100); - add_timer(&channel->poll_timer); -#else + Channel->OnChannelCallback(Channel->ChannelCallbackContext); -#endif + + mod_timer(&Channel->poll_timer, jiffies + usecs_to_jiffies(100)); } /** @@ -997,10 +993,6 @@ void VmbusChannelOnTimer(unsigned long data) if (channel->OnChannelCallback) { channel->OnChannelCallback(channel->ChannelCallbackContext); -#ifdef ENABLE_POLLING - channel->poll_timer.expires(jiffies + usecs_to_jiffies(100); - add_timer(&channel->poll_timer); -#endif } } diff --git a/drivers/staging/hv/ChannelMgmt.c b/drivers/staging/hv/ChannelMgmt.c index 3db62caedcf..ef38467ed4e 100644 --- a/drivers/staging/hv/ChannelMgmt.c +++ b/drivers/staging/hv/ChannelMgmt.c @@ -119,7 +119,7 @@ static inline void ReleaseVmbusChannel(void *context) */ void FreeVmbusChannel(struct vmbus_channel *Channel) { - del_timer(&Channel->poll_timer); + del_timer_sync(&Channel->poll_timer); /* * We have to release the channel's workqueue/thread in the vmbus's -- GitLab From d0e94d17ed8590d53252212414a627125825b379 Mon Sep 17 00:00:00 2001 From: Haiyang Zhang Date: Mon, 23 Nov 2009 17:00:22 +0000 Subject: [PATCH 1120/1165] Staging: hv: Fix some missing author names Fix some missing author names. They were accidentally removed by someone within Microsoft before the files were sent for inclusion in the kernel. Signed-off-by: Hank Janssen Signed-off-by: Haiyang Zhang Signed-off-by: Greg Kroah-Hartman --- drivers/staging/hv/BlkVsc.c | 1 + drivers/staging/hv/NetVsc.c | 1 + drivers/staging/hv/NetVsc.h | 1 + drivers/staging/hv/blkvsc_drv.c | 1 + drivers/staging/hv/netvsc_drv.c | 1 + 5 files changed, 5 insertions(+) diff --git a/drivers/staging/hv/BlkVsc.c b/drivers/staging/hv/BlkVsc.c index 51aa861292f..a48ee3a1264 100644 --- a/drivers/staging/hv/BlkVsc.c +++ b/drivers/staging/hv/BlkVsc.c @@ -16,6 +16,7 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * * Authors: + * Haiyang Zhang * Hank Janssen * */ diff --git a/drivers/staging/hv/NetVsc.c b/drivers/staging/hv/NetVsc.c index d384c0ddf06..1c717f9a554 100644 --- a/drivers/staging/hv/NetVsc.c +++ b/drivers/staging/hv/NetVsc.c @@ -15,6 +15,7 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * * Authors: + * Haiyang Zhang * Hank Janssen */ #include diff --git a/drivers/staging/hv/NetVsc.h b/drivers/staging/hv/NetVsc.h index 3e7112f7c75..6e0e0349412 100644 --- a/drivers/staging/hv/NetVsc.h +++ b/drivers/staging/hv/NetVsc.h @@ -16,6 +16,7 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * * Authors: + * Haiyang Zhang * Hank Janssen * */ diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c index 99c49261a8b..62b282844a5 100644 --- a/drivers/staging/hv/blkvsc_drv.c +++ b/drivers/staging/hv/blkvsc_drv.c @@ -15,6 +15,7 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * * Authors: + * Haiyang Zhang * Hank Janssen */ #include diff --git a/drivers/staging/hv/netvsc_drv.c b/drivers/staging/hv/netvsc_drv.c index 3192d50f725..0d7459e2d03 100644 --- a/drivers/staging/hv/netvsc_drv.c +++ b/drivers/staging/hv/netvsc_drv.c @@ -15,6 +15,7 @@ * Place - Suite 330, Boston, MA 02111-1307 USA. * * Authors: + * Haiyang Zhang * Hank Janssen */ #include -- GitLab From fb08808ca252a76519d3b17fc3b6cfc6b2806e55 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Wed, 21 Oct 2009 14:42:11 +0200 Subject: [PATCH 1121/1165] Staging: update TODO files Remove my mail address. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8187se/TODO | 3 +-- drivers/staging/rtl8192su/TODO | 3 +-- drivers/staging/vt6655/TODO | 5 ++--- drivers/staging/vt6656/TODO | 5 ++--- 4 files changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/staging/rtl8187se/TODO b/drivers/staging/rtl8187se/TODO index c09a9160739..a762e79873e 100644 --- a/drivers/staging/rtl8187se/TODO +++ b/drivers/staging/rtl8187se/TODO @@ -11,5 +11,4 @@ TODO: - sparse fixes - integrate with drivers/net/wireless/rtl818x -Please send any patches to Greg Kroah-Hartman and -Bartlomiej Zolnierkiewicz . +Please send any patches to Greg Kroah-Hartman . diff --git a/drivers/staging/rtl8192su/TODO b/drivers/staging/rtl8192su/TODO index b13be9edb27..f11eec70003 100644 --- a/drivers/staging/rtl8192su/TODO +++ b/drivers/staging/rtl8192su/TODO @@ -14,5 +14,4 @@ TODO: - sparse fixes - integrate with drivers/net/wireless/rtl818x -Please send any patches to Greg Kroah-Hartman and -Bartlomiej Zolnierkiewicz . +Please send any patches to Greg Kroah-Hartman . diff --git a/drivers/staging/vt6655/TODO b/drivers/staging/vt6655/TODO index 8462cd17eb6..cb04aaafc46 100644 --- a/drivers/staging/vt6655/TODO +++ b/drivers/staging/vt6655/TODO @@ -16,6 +16,5 @@ TODO: - sparse fixes - integrate with drivers/net/wireless -Please send any patches to Greg Kroah-Hartman , -Forest Bond and Bartlomiej Zolnierkiewicz -. +Please send any patches to Greg Kroah-Hartman +and Forest Bond . diff --git a/drivers/staging/vt6656/TODO b/drivers/staging/vt6656/TODO index 17cf50c6735..a318995ba07 100644 --- a/drivers/staging/vt6656/TODO +++ b/drivers/staging/vt6656/TODO @@ -15,6 +15,5 @@ TODO: - sparse fixes - integrate with drivers/net/wireless -Please send any patches to Greg Kroah-Hartman , -Forest Bond and Bartlomiej Zolnierkiewicz -. +Please send any patches to Greg Kroah-Hartman +and Forest Bond . -- GitLab From c2f6595fbdb408d3d6850cfae590c8fa93e27399 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 18 Nov 2009 11:37:15 -0500 Subject: [PATCH 1122/1165] USB: EHCI: don't send Clear-TT-Buffer following a STALL This patch (as1304) fixes a regression in ehci-hcd. Evidently some hubs don't handle Clear-TT-Buffer requests correctly, so we should avoid sending them when they don't appear to be absolutely necessary. The reported symptom is that output on a downstream audio device cuts out because the hub stops relaying isochronous packets. The patch prevents Clear-TT-Buffer requests from being sent following a STALL handshake. In theory a STALL indicates either that the downstream device sent a STALL or that no matching TT buffer could be found. In either case, the transfer is completed and the TT buffer does not remain busy, so it doesn't need to be cleared. Also, the patch fixes a minor flaw in the code that actually sends the Clear-TT-Buffer requests. Although the pipe direction isn't really used for control transfers, it should be a Send rather than a Receive. Signed-off-by: Alan Stern Reported-by: Javier Kohen CC: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 +- drivers/usb/host/ehci-q.c | 16 ++++++++++++++-- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 5ce839137ad..0f857e64505 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -444,7 +444,7 @@ resubmit: static inline int hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt) { - return usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), + return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), HUB_CLEAR_TT_BUFFER, USB_RT_PORT, devinfo, tt, NULL, 0, 1000); } diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 00ad9ce392e..139a2cc3f64 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -487,8 +487,20 @@ halt: * we must clear the TT buffer (11.17.5). */ if (unlikely(last_status != -EINPROGRESS && - last_status != -EREMOTEIO)) - ehci_clear_tt_buffer(ehci, qh, urb, token); + last_status != -EREMOTEIO)) { + /* The TT's in some hubs malfunction when they + * receive this request following a STALL (they + * stop sending isochronous packets). Since a + * STALL can't leave the TT buffer in a busy + * state (if you believe Figures 11-48 - 11-51 + * in the USB 2.0 spec), we won't clear the TT + * buffer in this case. Strictly speaking this + * is a violation of the spec. + */ + if (last_status != -EPIPE) + ehci_clear_tt_buffer(ehci, qh, urb, + token); + } } /* if we're removing something not at the queue head, -- GitLab From cea83241b3a84499c4f9b12f8288f787e7aa6383 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 18 Nov 2009 22:51:18 +0300 Subject: [PATCH 1123/1165] USB: musb_gadget: fix STALL handling The driver incorrectly cancels the mass-storage device CSW request (which leads to device reset) due to giving back URB at the head of endpoint's queue after sending each STALL handshake; stop doing that and start checking for the queue being non-empty before stalling an endpoint and disallowing stall in such case in musb_gadget_set_halt() like the other gadget drivers do. Moreover, the driver starts Rx request despite of the endpoint being halted -- fix this by moving the SendStall bit check from musb_g_rx() to rxstate(). And we also sometimes get into rxstate() with DMA still active after clearing an endpoint's halt (not clear why), so bail out in this case, similarly to what txstate() does... While at it, also do the following changes : - in musb_gadget_set_halt(), remove pointless Tx FIFO flushing (the driver does not allow stalling with non-empty Tx FIFO anyway); - in rxstate(), stop pointlessly zeroing the 'csr' variable; - in musb_gadget_set_halt(), move the 'done' label to a more proper place; - in musb_g_rx(), eliminate the 'done' label completely... Signed-off-by: Sergei Shtylyov Cc: Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 79 +++++++++++++++------------------- 1 file changed, 34 insertions(+), 45 deletions(-) diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 8b3c4e2ed7b..74073f9a43f 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -4,6 +4,7 @@ * Copyright 2005 Mentor Graphics Corporation * Copyright (C) 2005-2006 by Texas Instruments * Copyright (C) 2006-2007 Nokia Corporation + * Copyright (C) 2009 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -436,14 +437,6 @@ void musb_g_tx(struct musb *musb, u8 epnum) csr |= MUSB_TXCSR_P_WZC_BITS; csr &= ~MUSB_TXCSR_P_SENTSTALL; musb_writew(epio, MUSB_TXCSR, csr); - if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - dma->status = MUSB_DMA_STATUS_CORE_ABORT; - musb->dma_controller->channel_abort(dma); - } - - if (request) - musb_g_giveback(musb_ep, request, -EPIPE); - break; } @@ -582,15 +575,25 @@ void musb_g_tx(struct musb *musb, u8 epnum) */ static void rxstate(struct musb *musb, struct musb_request *req) { - u16 csr = 0; const u8 epnum = req->epnum; struct usb_request *request = &req->request; struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; void __iomem *epio = musb->endpoints[epnum].regs; unsigned fifo_count = 0; u16 len = musb_ep->packet_sz; + u16 csr = musb_readw(epio, MUSB_RXCSR); - csr = musb_readw(epio, MUSB_RXCSR); + /* We shouldn't get here while DMA is active, but we do... */ + if (dma_channel_status(musb_ep->dma) == MUSB_DMA_STATUS_BUSY) { + DBG(4, "DMA pending...\n"); + return; + } + + if (csr & MUSB_RXCSR_P_SENDSTALL) { + DBG(5, "%s stalling, RXCSR %04x\n", + musb_ep->end_point.name, csr); + return; + } if (is_cppi_enabled() && musb_ep->dma) { struct dma_controller *c = musb->dma_controller; @@ -761,19 +764,10 @@ void musb_g_rx(struct musb *musb, u8 epnum) csr, dma ? " (dma)" : "", request); if (csr & MUSB_RXCSR_P_SENTSTALL) { - if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { - dma->status = MUSB_DMA_STATUS_CORE_ABORT; - (void) musb->dma_controller->channel_abort(dma); - request->actual += musb_ep->dma->actual_len; - } - csr |= MUSB_RXCSR_P_WZC_BITS; csr &= ~MUSB_RXCSR_P_SENTSTALL; musb_writew(epio, MUSB_RXCSR, csr); - - if (request) - musb_g_giveback(musb_ep, request, -EPIPE); - goto done; + return; } if (csr & MUSB_RXCSR_P_OVERRUN) { @@ -795,7 +789,7 @@ void musb_g_rx(struct musb *musb, u8 epnum) DBG((csr & MUSB_RXCSR_DMAENAB) ? 4 : 1, "%s busy, csr %04x\n", musb_ep->end_point.name, csr); - goto done; + return; } if (dma && (csr & MUSB_RXCSR_DMAENAB)) { @@ -826,22 +820,15 @@ void musb_g_rx(struct musb *musb, u8 epnum) if ((request->actual < request->length) && (musb_ep->dma->actual_len == musb_ep->packet_sz)) - goto done; + return; #endif musb_g_giveback(musb_ep, request, 0); request = next_request(musb_ep); if (!request) - goto done; - - /* don't start more i/o till the stall clears */ - musb_ep_select(mbase, epnum); - csr = musb_readw(epio, MUSB_RXCSR); - if (csr & MUSB_RXCSR_P_SENDSTALL) - goto done; + return; } - /* analyze request if the ep is hot */ if (request) rxstate(musb, to_musb_request(request)); @@ -849,8 +836,6 @@ void musb_g_rx(struct musb *musb, u8 epnum) DBG(3, "packet waiting for %s%s request\n", musb_ep->desc ? "" : "inactive ", musb_ep->end_point.name); - -done: return; } @@ -1244,7 +1229,7 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) void __iomem *mbase; unsigned long flags; u16 csr; - struct musb_request *request = NULL; + struct musb_request *request; int status = 0; if (!ep) @@ -1260,24 +1245,29 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) musb_ep_select(mbase, epnum); - /* cannot portably stall with non-empty FIFO */ request = to_musb_request(next_request(musb_ep)); - if (value && musb_ep->is_in) { - csr = musb_readw(epio, MUSB_TXCSR); - if (csr & MUSB_TXCSR_FIFONOTEMPTY) { - DBG(3, "%s fifo busy, cannot halt\n", ep->name); - spin_unlock_irqrestore(&musb->lock, flags); - return -EAGAIN; + if (value) { + if (request) { + DBG(3, "request in progress, cannot halt %s\n", + ep->name); + status = -EAGAIN; + goto done; + } + /* Cannot portably stall with non-empty FIFO */ + if (musb_ep->is_in) { + csr = musb_readw(epio, MUSB_TXCSR); + if (csr & MUSB_TXCSR_FIFONOTEMPTY) { + DBG(3, "FIFO busy, cannot halt %s\n", ep->name); + status = -EAGAIN; + goto done; + } } - } /* set/clear the stall and toggle bits */ DBG(2, "%s: %s stall\n", ep->name, value ? "set" : "clear"); if (musb_ep->is_in) { csr = musb_readw(epio, MUSB_TXCSR); - if (csr & MUSB_TXCSR_FIFONOTEMPTY) - csr |= MUSB_TXCSR_FLUSHFIFO; csr |= MUSB_TXCSR_P_WZC_BITS | MUSB_TXCSR_CLRDATATOG; if (value) @@ -1300,14 +1290,13 @@ int musb_gadget_set_halt(struct usb_ep *ep, int value) musb_writew(epio, MUSB_RXCSR, csr); } -done: - /* maybe start the first request in the queue */ if (!musb_ep->busy && !value && request) { DBG(3, "restarting the request\n"); musb_ep_restart(musb, request); } +done: spin_unlock_irqrestore(&musb->lock, flags); return status; } -- GitLab From 0de6ab8b91f2e1e8e7fc66a8b5c5e8ca82ea16b7 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Tue, 17 Nov 2009 19:10:48 -0800 Subject: [PATCH 1124/1165] USB: ftdi_sio: Keep going when write errors are encountered. The use of urb->actual_length to update tx_outstanding_bytes implicitly assumes that the number of bytes actually written is the same as the number of bytes we tried to write. On error that assumption is violated so just use transfer_buffer_length the number of bytes we intended to write to the device. If an error occurs we need to fall through and call usb_serial_port_softint to wake up processes waiting in tty_wait_until_sent. Signed-off-by: Eric W. Biederman Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 9c60d6d4908..ebcc6d0e2e9 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1937,7 +1937,7 @@ static void ftdi_write_bulk_callback(struct urb *urb) return; } /* account for transferred data */ - countback = urb->actual_length; + countback = urb->transfer_buffer_length; data_offset = priv->write_offset; if (data_offset > 0) { /* Subtract the control bytes */ @@ -1950,7 +1950,6 @@ static void ftdi_write_bulk_callback(struct urb *urb) if (status) { dbg("nonzero write bulk status received: %d", status); - return; } usb_serial_port_softint(port); -- GitLab From c5deb832d7a3f9618b09e6eeaa91a1a845c90c65 Mon Sep 17 00:00:00 2001 From: Thomas Dahlmann Date: Tue, 17 Nov 2009 14:18:27 -0800 Subject: [PATCH 1125/1165] usb: amd5536udc: fixed shared interrupt bug and warning oops - fixed shared interrupt bug reported by Vadim Lobanov - fixed possible warning oops on driver unload when connected - prevent interrupt flood in PIO mode ("modprobe amd5536udc use_dma=0") when using gadget ether Signed-off-by: Thomas Dahlmann Cc: Robert Richter Cc: David Brownell Cc: stable Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/amd5536udc.c | 49 ++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 19 deletions(-) diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index d5b65962dd3..731150d4b1d 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -1213,7 +1213,12 @@ udc_queue(struct usb_ep *usbep, struct usb_request *usbreq, gfp_t gfp) tmp &= AMD_UNMASK_BIT(ep->num); writel(tmp, &dev->regs->ep_irqmsk); } - } + } else if (ep->in) { + /* enable ep irq */ + tmp = readl(&dev->regs->ep_irqmsk); + tmp &= AMD_UNMASK_BIT(ep->num); + writel(tmp, &dev->regs->ep_irqmsk); + } } else if (ep->dma) { @@ -2005,18 +2010,17 @@ __acquires(dev->lock) { int tmp; - /* empty queues and init hardware */ - udc_basic_init(dev); - for (tmp = 0; tmp < UDC_EP_NUM; tmp++) { - empty_req_queue(&dev->ep[tmp]); - } - if (dev->gadget.speed != USB_SPEED_UNKNOWN) { spin_unlock(&dev->lock); driver->disconnect(&dev->gadget); spin_lock(&dev->lock); } - /* init */ + + /* empty queues and init hardware */ + udc_basic_init(dev); + for (tmp = 0; tmp < UDC_EP_NUM; tmp++) + empty_req_queue(&dev->ep[tmp]); + udc_setup_endpoints(dev); } @@ -2472,6 +2476,13 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix) } } + } else if (!use_dma && ep->in) { + /* disable interrupt */ + tmp = readl( + &dev->regs->ep_irqmsk); + tmp |= AMD_BIT(ep->num); + writel(tmp, + &dev->regs->ep_irqmsk); } } /* clear status bits */ @@ -3279,6 +3290,17 @@ static int udc_pci_probe( goto finished; } + spin_lock_init(&dev->lock); + /* udc csr registers base */ + dev->csr = dev->virt_addr + UDC_CSR_ADDR; + /* dev registers base */ + dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR; + /* ep registers base */ + dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR; + /* fifo's base */ + dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR); + dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); + if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) { dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq); kfree(dev); @@ -3331,7 +3353,6 @@ static int udc_probe(struct udc *dev) udc_pollstall_timer.data = 0; /* device struct setup */ - spin_lock_init(&dev->lock); dev->gadget.ops = &udc_ops; dev_set_name(&dev->gadget.dev, "gadget"); @@ -3340,16 +3361,6 @@ static int udc_probe(struct udc *dev) dev->gadget.name = name; dev->gadget.is_dualspeed = 1; - /* udc csr registers base */ - dev->csr = dev->virt_addr + UDC_CSR_ADDR; - /* dev registers base */ - dev->regs = dev->virt_addr + UDC_DEVCFG_ADDR; - /* ep registers base */ - dev->ep_regs = dev->virt_addr + UDC_EPREGS_ADDR; - /* fifo's base */ - dev->rxfifo = (u32 __iomem *)(dev->virt_addr + UDC_RXFIFO_ADDR); - dev->txfifo = (u32 __iomem *)(dev->virt_addr + UDC_TXFIFO_ADDR); - /* init registers, interrupts, ... */ startup_registers(dev); -- GitLab From 1230435c258e34b47ab7adc3db572c88a284234a Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 17 Nov 2009 15:22:54 +0530 Subject: [PATCH 1126/1165] USB: musb: Remove unwanted message in boot log Removes below unnecessary log of almost 28 lines during boot. musb_hdrc: hw_ep 0shared, max 64 musb_hdrc: hw_ep 1tx, max 512 musb_hdrc: hw_ep 1rx, max 512 ... ... musb_hdrc: hw_ep 13shared, max 4096 musb_hdrc: hw_ep 14shared, max 1024 musb_hdrc: hw_ep 15shared, max 1024 Signed-off-by: Ajay Kumar Gupta Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 3a61ddb62bd..547e0e39072 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1450,7 +1450,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) #endif if (hw_ep->max_packet_sz_tx) { - printk(KERN_DEBUG + DBG(1, "%s: hw_ep %d%s, %smax %d\n", musb_driver_name, i, hw_ep->is_shared_fifo ? "shared" : "tx", @@ -1459,7 +1459,7 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb) hw_ep->max_packet_sz_tx); } if (hw_ep->max_packet_sz_rx && !hw_ep->is_shared_fifo) { - printk(KERN_DEBUG + DBG(1, "%s: hw_ep %d%s, %smax %d\n", musb_driver_name, i, "rx", -- GitLab From dfeffa531ccf9c31f2f55df6d7ca86eec92142df Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 17 Nov 2009 15:22:55 +0530 Subject: [PATCH 1127/1165] USB: musb: fix ISOC Tx programming for CPPI DMAs Isochronous Tx DMA is getting programmed but never getting started for CPPI and TUSB DMAs and thus Isochronous Tx doesn't work. Fixing it by starting DMAs using musb_h_tx_dma_start(). Signed-off-by: Swaminathan S Signed-off-by: Babu Ravi Signed-off-by: Ajay Kumar Gupta Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index cf94511485f..e3ab40a966e 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1301,8 +1301,11 @@ void musb_host_tx(struct musb *musb, u8 epnum) return; } else if (usb_pipeisoc(pipe) && dma) { if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb, - offset, length)) + offset, length)) { + if (is_cppi_enabled() || tusb_dma_omap()) + musb_h_tx_dma_start(hw_ep); return; + } } else if (tx_csr & MUSB_TXCSR_DMAENAB) { DBG(1, "not complete, but DMA enabled?\n"); return; -- GitLab From 5542bc2ac7b52c021fc9c7a96329955491b7e763 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= Date: Tue, 17 Nov 2009 15:22:56 +0530 Subject: [PATCH 1128/1165] USB: musb: respect usb_request->zero in control requests MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In gadget mode the answer to a control request should be followed by a zero-length packet if the amount transferred is an exact multiple of the endpoint's packet size and the requests has its "zero" flag set. This patch prevents the request from being immediately removed from the queue when a control IN transfer ends on a full packet and "zero" is set. The next time ep0_txstate is entered, a zero-length packet is queued and the request is removed as fifo_count is 0. Signed-off-by: Daniel Glöckner Signed-off-by: Ajay Kumar Gupta Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget_ep0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 7a6778675ad..522efb31b56 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -511,7 +511,8 @@ static void ep0_txstate(struct musb *musb) /* update the flags */ if (fifo_count < MUSB_MAX_END0_PACKET - || request->actual == request->length) { + || (request->actual == request->length + && !request->zero)) { musb->ep0_state = MUSB_EP0_STAGE_STATUSOUT; csr |= MUSB_CSR0_P_DATAEND; } else -- GitLab From 8d6499e5bde91ad05dea4f666bdfe79e65e7cf96 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Daniel=20Gl=C3=B6ckner?= Date: Tue, 17 Nov 2009 15:22:57 +0530 Subject: [PATCH 1129/1165] USB: musb: Fix CPPI IRQs not being signaled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On tx channel abort a cppi interrupt is generated for a short time by setting the lowest bit of the TCPPICOMPPTR register. It is then reset immediately by clearing the bit. When the interrupt handler is run, it does not detect an interrupt in the TCPPIMSKSR or RCPPIMSKSR registers and thus exits early without writing the TCPPIEOIR register. It appears that this inhibits further cppi interrupts until the handler is called by chance, f.ex. from davinci_interrupt(). By moving the unmasking of the interrupt below the writes to TCPPICOMPPTR, no interrupt is generated and no write to TCPPIEOIR is necessary. Signed-off-by: Daniel Glöckner Signed-off-by: Ajay Kumar Gupta Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/cppi_dma.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index c3577bbbae6..ef2332a9941 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -1442,11 +1442,6 @@ static int cppi_channel_abort(struct dma_channel *channel) musb_writew(regs, MUSB_TXCSR, value); musb_writew(regs, MUSB_TXCSR, value); - /* re-enable interrupt */ - if (enabled) - musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG, - (1 << cppi_ch->index)); - /* While we scrub the TX state RAM, ensure that we clean * up any interrupt that's currently asserted: * 1. Write to completion Ptr value 0x1(bit 0 set) @@ -1459,6 +1454,11 @@ static int cppi_channel_abort(struct dma_channel *channel) cppi_reset_tx(tx_ram, 1); musb_writel(&tx_ram->tx_complete, 0, 0); + /* re-enable interrupt */ + if (enabled) + musb_writel(tibase, DAVINCI_TXCPPI_INTENAB_REG, + (1 << cppi_ch->index)); + cppi_dump_tx(5, cppi_ch, " (done teardown)"); /* REVISIT tx side _should_ clean up the same way -- GitLab From ee4ecb8ac63a5792bec448037d4b82ec4144f94b Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 27 Nov 2009 15:17:59 +0100 Subject: [PATCH 1130/1165] USB: work around for EHCI with quirky periodic schedules a quirky chipset needs periodic schedules to run for a minimum time before they can be disabled again. This enforces the requirement with a time stamp and a calculated delay Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 ++ drivers/usb/host/ehci-pci.c | 4 ++++ drivers/usb/host/ehci-sched.c | 12 ++++++++++++ drivers/usb/host/ehci.h | 2 ++ 4 files changed, 20 insertions(+) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9835e071394..f5f5601701c 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include #include @@ -676,6 +677,7 @@ static int ehci_run (struct usb_hcd *hcd) ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ msleep(5); up_write(&ehci_cf_port_reset_rwsem); + ehci->last_periodic_enable = ktime_get_real(); temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase)); ehci_info (ehci, diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 378861b9d79..ead5f4f2aa5 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -111,6 +111,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd) switch (pdev->vendor) { case PCI_VENDOR_ID_INTEL: ehci->need_io_watchdog = 0; + if (pdev->device == 0x27cc) { + ehci->broken_periodic = 1; + ehci_info(ehci, "using broken periodic workaround\n"); + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index b25cdea93a1..a5535b5e3fe 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -475,6 +475,8 @@ static int enable_periodic (struct ehci_hcd *ehci) /* make sure ehci_work scans these */ ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index) % (ehci->periodic_size << 3); + if (unlikely(ehci->broken_periodic)) + ehci->last_periodic_enable = ktime_get_real(); return 0; } @@ -486,6 +488,16 @@ static int disable_periodic (struct ehci_hcd *ehci) if (--ehci->periodic_sched) return 0; + if (unlikely(ehci->broken_periodic)) { + /* delay experimentally determined */ + ktime_t safe = ktime_add_us(ehci->last_periodic_enable, 1000); + ktime_t now = ktime_get_real(); + s64 delay = ktime_us_delta(safe, now); + + if (unlikely(delay > 0)) + udelay(delay); + } + /* did setting PSE not take effect yet? * takes effect only at frame boundaries... */ diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 064e76821ff..2d85e21ff28 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -118,6 +118,7 @@ struct ehci_hcd { /* one per controller */ unsigned stamp; unsigned random_frame; unsigned long next_statechange; + ktime_t last_periodic_enable; u32 command; /* SILICON QUIRKS */ @@ -127,6 +128,7 @@ struct ehci_hcd { /* one per controller */ unsigned big_endian_desc:1; unsigned has_amcc_usb23:1; unsigned need_io_watchdog:1; + unsigned broken_periodic:1; /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) -- GitLab From 0ec8648379334f1e127ebd5e57a625890f116824 Mon Sep 17 00:00:00 2001 From: Gernot Hillier Date: Fri, 27 Nov 2009 13:49:23 +0100 Subject: [PATCH 1131/1165] USB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver This patch adds the vendor and device id for the Mobilcom Debitel UMTS surf stick (a.k.a. 4G Systems XSStick W14, MobiData MBD-200HU, ...). To see these ids, you need to switch the stick to modem operation first with the help of usb_modeswitch. This makes it switch from 1c9e:f000 to 1c9e:9603 and thus be recognized by the option driver. Signed-off-by: Gernot Hillier Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 319aaf9725b..0577e4b6111 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -336,6 +336,10 @@ static int option_resume(struct usb_serial *serial); #define AIRPLUS_VENDOR_ID 0x1011 #define AIRPLUS_PRODUCT_MCD650 0x3198 +/* 4G Systems products */ +#define FOUR_G_SYSTEMS_VENDOR_ID 0x1c9e +#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -599,6 +603,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, + { USB_DEVICE(FOUR_G_SYSTEMS_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- GitLab From 745dd2405e281d96c0a449103bdf6a895048f28c Mon Sep 17 00:00:00 2001 From: Michael Cree Date: Mon, 30 Nov 2009 22:44:40 -0500 Subject: [PATCH 1132/1165] Alpha: Rearrange thread info flags fixing two regressions The removal of the TIF_NOTIFY_RESUME flag, commit a583f1b54249b "remove unused TIF_NOTIFY_RESUME flag," resulted in incorrect setting of the unaligned access control flags by the prctl syscall. The re-addition of the TIF_NOTIFY_RESUME flag, commit d0420c83f39f "KEYS: Extend TIF_NOTIFY_RESUME to (almost) all architectures [try #6]" further caused problems, namely incorrect operands to assembler code as evidenced by: AS arch/alpha/kernel/entry.o arch/alpha/kernel/entry.S: Assembler messages: arch/alpha/kernel/entry.S:326: Warning: operand out of range (0x0000000000000406 is not between 0x0000000000000000 and 0x00000000000000ff) Both regressions fixed by (1) rearranging TIF_NOTIFY_RESUME flag to be in lower 8 bits of the thread info flags, and (2) making sure that ALPHA_UAC_SHIFT matches the rearrangement of the thread info flags. Signed-off-by: Michael Cree Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: David Howells , Signed-off-by: Matt Turner --- arch/alpha/include/asm/thread_info.h | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 815680b585e..b3e888638bb 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -61,21 +61,24 @@ register struct thread_info *__current_thread_info __asm__("$8"); /* * Thread information flags: * - these are process state flags and used from assembly - * - pending work-to-be-done flags come first to fit in and immediate operand. + * - pending work-to-be-done flags come first and must be assigned to be + * within bits 0 to 7 to fit in and immediate operand. + * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned + * control flags. * * TIF_SYSCALL_TRACE is known to be 0 via blbs. */ #define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_SIGPENDING 1 /* signal pending */ -#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ -#define TIF_POLLING_NRFLAG 3 /* poll_idle is polling NEED_RESCHED */ -#define TIF_DIE_IF_KERNEL 4 /* dik recursion lock */ -#define TIF_UAC_NOPRINT 5 /* see sysinfo.h */ -#define TIF_UAC_NOFIX 6 -#define TIF_UAC_SIGBUS 7 -#define TIF_MEMDIE 8 -#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal */ -#define TIF_NOTIFY_RESUME 10 /* callback before returning to user */ +#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 8 /* poll_idle is polling NEED_RESCHED */ +#define TIF_DIE_IF_KERNEL 9 /* dik recursion lock */ +#define TIF_UAC_NOPRINT 10 /* see sysinfo.h */ +#define TIF_UAC_NOFIX 11 +#define TIF_UAC_SIGBUS 12 +#define TIF_MEMDIE 13 +#define TIF_RESTORE_SIGMASK 14 /* restore signal mask in do_signal */ #define TIF_FREEZE 16 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1< Date: Mon, 30 Nov 2009 22:51:31 -0500 Subject: [PATCH 1133/1165] alpha: Fixup last users of irq_chip->typename The typename member of struct irq_chip was kept for migration purposes and is obsolete since more than 2 years. Fix up the leftovers. Signed-off-by: Thomas Gleixner Cc: Richard Henderson Cc: linux-alpha@vger.kernel.org Signed-off-by: Matt Turner --- arch/alpha/kernel/irq.c | 2 +- arch/alpha/kernel/irq_alpha.c | 2 +- arch/alpha/kernel/irq_i8259.c | 2 +- arch/alpha/kernel/irq_pyxis.c | 2 +- arch/alpha/kernel/irq_srm.c | 2 +- arch/alpha/kernel/sys_alcor.c | 2 +- arch/alpha/kernel/sys_cabriolet.c | 2 +- arch/alpha/kernel/sys_dp264.c | 4 ++-- arch/alpha/kernel/sys_eb64p.c | 2 +- arch/alpha/kernel/sys_eiger.c | 2 +- arch/alpha/kernel/sys_jensen.c | 2 +- arch/alpha/kernel/sys_marvel.c | 6 +++--- arch/alpha/kernel/sys_mikasa.c | 2 +- arch/alpha/kernel/sys_noritake.c | 2 +- arch/alpha/kernel/sys_rawhide.c | 2 +- arch/alpha/kernel/sys_rx164.c | 2 +- arch/alpha/kernel/sys_sable.c | 2 +- arch/alpha/kernel/sys_takara.c | 2 +- arch/alpha/kernel/sys_titan.c | 2 +- arch/alpha/kernel/sys_wildfire.c | 2 +- 20 files changed, 23 insertions(+), 23 deletions(-) diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c index cc783466142..c0de072b830 100644 --- a/arch/alpha/kernel/irq.c +++ b/arch/alpha/kernel/irq.c @@ -92,7 +92,7 @@ show_interrupts(struct seq_file *p, void *v) for_each_online_cpu(j) seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j)); #endif - seq_printf(p, " %14s", irq_desc[irq].chip->typename); + seq_printf(p, " %14s", irq_desc[irq].chip->name); seq_printf(p, " %c%s", (action->flags & IRQF_DISABLED)?'+':' ', action->name); diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index 38c805dfc54..cfde865b78e 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -228,7 +228,7 @@ struct irqaction timer_irqaction = { }; static struct irq_chip rtc_irq_type = { - .typename = "RTC", + .name = "RTC", .startup = rtc_startup, .shutdown = rtc_enable_disable, .enable = rtc_enable_disable, diff --git a/arch/alpha/kernel/irq_i8259.c b/arch/alpha/kernel/irq_i8259.c index 50bfec9b588..83a9ac28089 100644 --- a/arch/alpha/kernel/irq_i8259.c +++ b/arch/alpha/kernel/irq_i8259.c @@ -84,7 +84,7 @@ i8259a_end_irq(unsigned int irq) } struct irq_chip i8259a_irq_type = { - .typename = "XT-PIC", + .name = "XT-PIC", .startup = i8259a_startup_irq, .shutdown = i8259a_disable_irq, .enable = i8259a_enable_irq, diff --git a/arch/alpha/kernel/irq_pyxis.c b/arch/alpha/kernel/irq_pyxis.c index 69199a76ec4..989ce46a0cf 100644 --- a/arch/alpha/kernel/irq_pyxis.c +++ b/arch/alpha/kernel/irq_pyxis.c @@ -71,7 +71,7 @@ pyxis_mask_and_ack_irq(unsigned int irq) } static struct irq_chip pyxis_irq_type = { - .typename = "PYXIS", + .name = "PYXIS", .startup = pyxis_startup_irq, .shutdown = pyxis_disable_irq, .enable = pyxis_enable_irq, diff --git a/arch/alpha/kernel/irq_srm.c b/arch/alpha/kernel/irq_srm.c index 85229369a1f..d63e93e1e8b 100644 --- a/arch/alpha/kernel/irq_srm.c +++ b/arch/alpha/kernel/irq_srm.c @@ -49,7 +49,7 @@ srm_end_irq(unsigned int irq) /* Handle interrupts from the SRM, assuming no additional weirdness. */ static struct irq_chip srm_irq_type = { - .typename = "SRM", + .name = "SRM", .startup = srm_startup_irq, .shutdown = srm_disable_irq, .enable = srm_enable_irq, diff --git a/arch/alpha/kernel/sys_alcor.c b/arch/alpha/kernel/sys_alcor.c index 382035ef739..20a30b8b965 100644 --- a/arch/alpha/kernel/sys_alcor.c +++ b/arch/alpha/kernel/sys_alcor.c @@ -90,7 +90,7 @@ alcor_end_irq(unsigned int irq) } static struct irq_chip alcor_irq_type = { - .typename = "ALCOR", + .name = "ALCOR", .startup = alcor_startup_irq, .shutdown = alcor_disable_irq, .enable = alcor_enable_irq, diff --git a/arch/alpha/kernel/sys_cabriolet.c b/arch/alpha/kernel/sys_cabriolet.c index ed349436732..affd0f3f25d 100644 --- a/arch/alpha/kernel/sys_cabriolet.c +++ b/arch/alpha/kernel/sys_cabriolet.c @@ -72,7 +72,7 @@ cabriolet_end_irq(unsigned int irq) } static struct irq_chip cabriolet_irq_type = { - .typename = "CABRIOLET", + .name = "CABRIOLET", .startup = cabriolet_startup_irq, .shutdown = cabriolet_disable_irq, .enable = cabriolet_enable_irq, diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c index 46e70ece517..d64e1e497e7 100644 --- a/arch/alpha/kernel/sys_dp264.c +++ b/arch/alpha/kernel/sys_dp264.c @@ -199,7 +199,7 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity) } static struct irq_chip dp264_irq_type = { - .typename = "DP264", + .name = "DP264", .startup = dp264_startup_irq, .shutdown = dp264_disable_irq, .enable = dp264_enable_irq, @@ -210,7 +210,7 @@ static struct irq_chip dp264_irq_type = { }; static struct irq_chip clipper_irq_type = { - .typename = "CLIPPER", + .name = "CLIPPER", .startup = clipper_startup_irq, .shutdown = clipper_disable_irq, .enable = clipper_enable_irq, diff --git a/arch/alpha/kernel/sys_eb64p.c b/arch/alpha/kernel/sys_eb64p.c index 660c23ef661..df2090ce5e7 100644 --- a/arch/alpha/kernel/sys_eb64p.c +++ b/arch/alpha/kernel/sys_eb64p.c @@ -70,7 +70,7 @@ eb64p_end_irq(unsigned int irq) } static struct irq_chip eb64p_irq_type = { - .typename = "EB64P", + .name = "EB64P", .startup = eb64p_startup_irq, .shutdown = eb64p_disable_irq, .enable = eb64p_enable_irq, diff --git a/arch/alpha/kernel/sys_eiger.c b/arch/alpha/kernel/sys_eiger.c index b99ea488d84..3ca1dbcf404 100644 --- a/arch/alpha/kernel/sys_eiger.c +++ b/arch/alpha/kernel/sys_eiger.c @@ -81,7 +81,7 @@ eiger_end_irq(unsigned int irq) } static struct irq_chip eiger_irq_type = { - .typename = "EIGER", + .name = "EIGER", .startup = eiger_startup_irq, .shutdown = eiger_disable_irq, .enable = eiger_enable_irq, diff --git a/arch/alpha/kernel/sys_jensen.c b/arch/alpha/kernel/sys_jensen.c index ef0b83a070a..7a7ae36fff9 100644 --- a/arch/alpha/kernel/sys_jensen.c +++ b/arch/alpha/kernel/sys_jensen.c @@ -119,7 +119,7 @@ jensen_local_end(unsigned int irq) } static struct irq_chip jensen_local_irq_type = { - .typename = "LOCAL", + .name = "LOCAL", .startup = jensen_local_startup, .shutdown = jensen_local_shutdown, .enable = jensen_local_enable, diff --git a/arch/alpha/kernel/sys_marvel.c b/arch/alpha/kernel/sys_marvel.c index bbfc4f20ca7..0bb3b5c4f69 100644 --- a/arch/alpha/kernel/sys_marvel.c +++ b/arch/alpha/kernel/sys_marvel.c @@ -170,7 +170,7 @@ marvel_irq_noop_return(unsigned int irq) } static struct irq_chip marvel_legacy_irq_type = { - .typename = "LEGACY", + .name = "LEGACY", .startup = marvel_irq_noop_return, .shutdown = marvel_irq_noop, .enable = marvel_irq_noop, @@ -180,7 +180,7 @@ static struct irq_chip marvel_legacy_irq_type = { }; static struct irq_chip io7_lsi_irq_type = { - .typename = "LSI", + .name = "LSI", .startup = io7_startup_irq, .shutdown = io7_disable_irq, .enable = io7_enable_irq, @@ -190,7 +190,7 @@ static struct irq_chip io7_lsi_irq_type = { }; static struct irq_chip io7_msi_irq_type = { - .typename = "MSI", + .name = "MSI", .startup = io7_startup_irq, .shutdown = io7_disable_irq, .enable = io7_enable_irq, diff --git a/arch/alpha/kernel/sys_mikasa.c b/arch/alpha/kernel/sys_mikasa.c index 4e366641a08..ee886516981 100644 --- a/arch/alpha/kernel/sys_mikasa.c +++ b/arch/alpha/kernel/sys_mikasa.c @@ -69,7 +69,7 @@ mikasa_end_irq(unsigned int irq) } static struct irq_chip mikasa_irq_type = { - .typename = "MIKASA", + .name = "MIKASA", .startup = mikasa_startup_irq, .shutdown = mikasa_disable_irq, .enable = mikasa_enable_irq, diff --git a/arch/alpha/kernel/sys_noritake.c b/arch/alpha/kernel/sys_noritake.c index 35753a173ba..86503fe73a8 100644 --- a/arch/alpha/kernel/sys_noritake.c +++ b/arch/alpha/kernel/sys_noritake.c @@ -74,7 +74,7 @@ noritake_end_irq(unsigned int irq) } static struct irq_chip noritake_irq_type = { - .typename = "NORITAKE", + .name = "NORITAKE", .startup = noritake_startup_irq, .shutdown = noritake_disable_irq, .enable = noritake_enable_irq, diff --git a/arch/alpha/kernel/sys_rawhide.c b/arch/alpha/kernel/sys_rawhide.c index f3aec7e085c..26c322bf89e 100644 --- a/arch/alpha/kernel/sys_rawhide.c +++ b/arch/alpha/kernel/sys_rawhide.c @@ -136,7 +136,7 @@ rawhide_end_irq(unsigned int irq) } static struct irq_chip rawhide_irq_type = { - .typename = "RAWHIDE", + .name = "RAWHIDE", .startup = rawhide_startup_irq, .shutdown = rawhide_disable_irq, .enable = rawhide_enable_irq, diff --git a/arch/alpha/kernel/sys_rx164.c b/arch/alpha/kernel/sys_rx164.c index fc924637345..be161129eab 100644 --- a/arch/alpha/kernel/sys_rx164.c +++ b/arch/alpha/kernel/sys_rx164.c @@ -73,7 +73,7 @@ rx164_end_irq(unsigned int irq) } static struct irq_chip rx164_irq_type = { - .typename = "RX164", + .name = "RX164", .startup = rx164_startup_irq, .shutdown = rx164_disable_irq, .enable = rx164_enable_irq, diff --git a/arch/alpha/kernel/sys_sable.c b/arch/alpha/kernel/sys_sable.c index 426eb6906d0..b2abe27a23c 100644 --- a/arch/alpha/kernel/sys_sable.c +++ b/arch/alpha/kernel/sys_sable.c @@ -502,7 +502,7 @@ sable_lynx_mask_and_ack_irq(unsigned int irq) } static struct irq_chip sable_lynx_irq_type = { - .typename = "SABLE/LYNX", + .name = "SABLE/LYNX", .startup = sable_lynx_startup_irq, .shutdown = sable_lynx_disable_irq, .enable = sable_lynx_enable_irq, diff --git a/arch/alpha/kernel/sys_takara.c b/arch/alpha/kernel/sys_takara.c index 830318c2166..230464885b5 100644 --- a/arch/alpha/kernel/sys_takara.c +++ b/arch/alpha/kernel/sys_takara.c @@ -75,7 +75,7 @@ takara_end_irq(unsigned int irq) } static struct irq_chip takara_irq_type = { - .typename = "TAKARA", + .name = "TAKARA", .startup = takara_startup_irq, .shutdown = takara_disable_irq, .enable = takara_enable_irq, diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c index 88978fc60f8..288053342c8 100644 --- a/arch/alpha/kernel/sys_titan.c +++ b/arch/alpha/kernel/sys_titan.c @@ -195,7 +195,7 @@ init_titan_irqs(struct irq_chip * ops, int imin, int imax) } static struct irq_chip titan_irq_type = { - .typename = "TITAN", + .name = "TITAN", .startup = titan_startup_irq, .shutdown = titan_disable_irq, .enable = titan_enable_irq, diff --git a/arch/alpha/kernel/sys_wildfire.c b/arch/alpha/kernel/sys_wildfire.c index e91b4c3838a..62fd972e18e 100644 --- a/arch/alpha/kernel/sys_wildfire.c +++ b/arch/alpha/kernel/sys_wildfire.c @@ -158,7 +158,7 @@ wildfire_end_irq(unsigned int irq) } static struct irq_chip wildfire_irq_type = { - .typename = "WILDFIRE", + .name = "WILDFIRE", .startup = wildfire_startup_irq, .shutdown = wildfire_disable_irq, .enable = wildfire_enable_irq, -- GitLab From d0e260782c3702a009645c3caa02e381dab8798b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 1 Dec 2009 17:30:59 +1100 Subject: [PATCH 1134/1165] md: revert incorrect fix for read error handling in raid1. commit 4706b349f was a forward port of a fix that was needed for SLES10. But in fact it is not needed in mainline because the earlier commit dd00a99e7a fixes the same problem in a better way. Further, this commit introduces a bug in the way it interacts with the automatic read-error-correction. If, after a read error is successfully corrected, the same disk is chosen to re-read - the re-read won't be attempted but an error will be returned instead. After reverting that commit, there is the possibility that a read error on a read-only array (where read errors cannot be corrected as that requires a write) will repeatedly read the same device and continue to get an error. So in the "Array is readonly" case, fail the drive immediately on a read error. Signed-off-by: NeilBrown Cc: stable@kernel.org --- drivers/md/raid1.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index a053423785c..e07ce2e033a 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1650,11 +1650,12 @@ static void raid1d(mddev_t *mddev) r1_bio->sector, r1_bio->sectors); unfreeze_array(conf); - } + } else + md_error(mddev, + conf->mirrors[r1_bio->read_disk].rdev); bio = r1_bio->bios[r1_bio->read_disk]; - if ((disk=read_balance(conf, r1_bio)) == -1 || - disk == r1_bio->read_disk) { + if ((disk=read_balance(conf, r1_bio)) == -1) { printk(KERN_ALERT "raid1: %s: unrecoverable I/O" " read error for block %llu\n", bdevname(bio->bi_bdev,b), -- GitLab From 7716977b6ae5a0cdd0afab5c6035c4d0ce53f599 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 30 Nov 2009 13:24:18 +0000 Subject: [PATCH 1135/1165] mfd: Correct WM831X_MAX_ISEL_VALUE There was confusion between the array size and the highest ISEL value possible. Reported-by: Dan Carpenter Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm831x-core.c | 2 +- include/linux/mfd/wm831x/regulator.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 49b7885c270..7f27576ca04 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -29,7 +29,7 @@ /* Current settings - values are 2*2^(reg_val/4) microamps. These are * exported since they are used by multiple drivers. */ -int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = { +int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1] = { 2, 2, 3, diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h index f95466343fb..955d30fc6a2 100644 --- a/include/linux/mfd/wm831x/regulator.h +++ b/include/linux/mfd/wm831x/regulator.h @@ -1212,7 +1212,7 @@ #define WM831X_LDO1_OK_SHIFT 0 /* LDO1_OK */ #define WM831X_LDO1_OK_WIDTH 1 /* LDO1_OK */ -#define WM831X_ISINK_MAX_ISEL 56 -extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL]; +#define WM831X_ISINK_MAX_ISEL 55 +extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL + 1]; #endif -- GitLab From 6f054164322bc6c1233402b9ed6b40d4af39a98f Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 1 Dec 2009 13:38:45 +0000 Subject: [PATCH 1136/1165] 9p: fix build breakage introduced by FS-Cache While building 2.6.32-rc8-git2 for Fedora I noticed the following thinko in commit 201a15428bd54f83eccec8b7c64a04b8f9431204 ("FS-Cache: Handle pages pending storage that get evicted under OOM conditions"): fs/9p/cache.c: In function '__v9fs_fscache_release_page': fs/9p/cache.c:346: error: 'vnode' undeclared (first use in this function) fs/9p/cache.c:346: error: (Each undeclared identifier is reported only once fs/9p/cache.c:346: error: for each function it appears in.) make[2]: *** [fs/9p/cache.o] Error 1 Fix the 9P filesystem to correctly construct the argument to fscache_maybe_release_page(). Signed-off-by: Kyle McMartin Signed-off-by: Xiaotian Feng [from identical patch] Signed-off-by: Stefan Lippers-Hollmann [from identical patch] Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/9p/cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/9p/cache.c b/fs/9p/cache.c index bcc5357a906..e777961939f 100644 --- a/fs/9p/cache.c +++ b/fs/9p/cache.c @@ -343,7 +343,7 @@ int __v9fs_fscache_release_page(struct page *page, gfp_t gfp) BUG_ON(!vcookie->fscache); - return fscache_maybe_release_page(vnode->cache, page, gfp); + return fscache_maybe_release_page(vcookie->fscache, page, gfp); } void __v9fs_fscache_invalidate_page(struct page *page) -- GitLab From fa1dae4906982b5d896c07613b1fe42456133b1c Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 1 Dec 2009 13:52:08 +0000 Subject: [PATCH 1137/1165] SLOW_WORK: Fix the CONFIG_MODULES=n case Commits 3d7a641 ("SLOW_WORK: Wait for outstanding work items belonging to a module to clear") introduced some code to make sure that all of a module's slow-work items were complete before that module was removed, and commit 3bde31a ("SLOW_WORK: Allow a requeueable work item to sleep till the thread is needed") further extended that, breaking it in the process if CONFIG_MODULES=n: CC kernel/slow-work.o kernel/slow-work.c: In function 'slow_work_execute': kernel/slow-work.c:313: error: 'slow_work_thread_processing' undeclared (first use in this function) kernel/slow-work.c:313: error: (Each undeclared identifier is reported only once kernel/slow-work.c:313: error: for each function it appears in.) kernel/slow-work.c: In function 'slow_work_wait_for_items': kernel/slow-work.c:950: error: 'slow_work_unreg_sync_lock' undeclared (first use in this function) kernel/slow-work.c:951: error: 'slow_work_unreg_wq' undeclared (first use in this function) kernel/slow-work.c:961: error: 'slow_work_unreg_work_item' undeclared (first use in this function) kernel/slow-work.c:974: error: 'slow_work_unreg_module' undeclared (first use in this function) kernel/slow-work.c:977: error: 'slow_work_thread_processing' undeclared (first use in this function) make[1]: *** [kernel/slow-work.o] Error 1 Fix this by: (1) Extracting the bits of slow_work_execute() that are contingent on CONFIG_MODULES, and the bits that should be, into inline functions and placing them into the #ifdef'd section that defines the relevant variables and adding stubs for moduleless kernels. This allows the removal of some #ifdefs. (2) #ifdef'ing out the contents of slow_work_wait_for_items() in moduleless kernels. The four functions related to handling module unloading synchronisation (and their associated variables) could be offloaded into a separate .c file, but each function is only used once and three of them are tiny, so doing so would prevent them from being inlined. Reported-by: Ingo Molnar Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- kernel/slow-work.c | 46 +++++++++++++++++++++++++++++----------------- 1 file changed, 29 insertions(+), 17 deletions(-) diff --git a/kernel/slow-work.c b/kernel/slow-work.c index da94f3c101a..b5c17f15f9d 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -109,6 +109,30 @@ static struct module *slow_work_unreg_module; static struct slow_work *slow_work_unreg_work_item; static DECLARE_WAIT_QUEUE_HEAD(slow_work_unreg_wq); static DEFINE_MUTEX(slow_work_unreg_sync_lock); + +static void slow_work_set_thread_processing(int id, struct slow_work *work) +{ + if (work) + slow_work_thread_processing[id] = work->owner; +} +static void slow_work_done_thread_processing(int id, struct slow_work *work) +{ + struct module *module = slow_work_thread_processing[id]; + + slow_work_thread_processing[id] = NULL; + smp_mb(); + if (slow_work_unreg_work_item == work || + slow_work_unreg_module == module) + wake_up_all(&slow_work_unreg_wq); +} +static void slow_work_clear_thread_processing(int id) +{ + slow_work_thread_processing[id] = NULL; +} +#else +static void slow_work_set_thread_processing(int id, struct slow_work *work) {} +static void slow_work_done_thread_processing(int id, struct slow_work *work) {} +static void slow_work_clear_thread_processing(int id) {} #endif /* @@ -197,9 +221,6 @@ static unsigned slow_work_calc_vsmax(void) */ static noinline bool slow_work_execute(int id) { -#ifdef CONFIG_MODULES - struct module *module; -#endif struct slow_work *work = NULL; unsigned vsmax; bool very_slow; @@ -236,10 +257,7 @@ static noinline bool slow_work_execute(int id) very_slow = false; /* avoid the compiler warning */ } -#ifdef CONFIG_MODULES - if (work) - slow_work_thread_processing[id] = work->owner; -#endif + slow_work_set_thread_processing(id, work); if (work) { slow_work_mark_time(work); slow_work_begin_exec(id, work); @@ -287,15 +305,7 @@ static noinline bool slow_work_execute(int id) /* sort out the race between module unloading and put_ref() */ slow_work_put_ref(work); - -#ifdef CONFIG_MODULES - module = slow_work_thread_processing[id]; - slow_work_thread_processing[id] = NULL; - smp_mb(); - if (slow_work_unreg_work_item == work || - slow_work_unreg_module == module) - wake_up_all(&slow_work_unreg_wq); -#endif + slow_work_done_thread_processing(id, work); return true; @@ -310,7 +320,7 @@ auto_requeue: else list_add_tail(&work->link, &slow_work_queue); spin_unlock_irq(&slow_work_queue_lock); - slow_work_thread_processing[id] = NULL; + slow_work_clear_thread_processing(id); return true; } @@ -943,6 +953,7 @@ EXPORT_SYMBOL(slow_work_register_user); */ static void slow_work_wait_for_items(struct module *module) { +#ifdef CONFIG_MODULES DECLARE_WAITQUEUE(myself, current); struct slow_work *work; int loop; @@ -989,6 +1000,7 @@ static void slow_work_wait_for_items(struct module *module) remove_wait_queue(&slow_work_unreg_wq, &myself); mutex_unlock(&slow_work_unreg_sync_lock); +#endif /* CONFIG_MODULES */ } /** -- GitLab From 3350b2acdd39d23db52710045536b943fe38a35c Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Tue, 1 Dec 2009 14:09:24 +0000 Subject: [PATCH 1138/1165] CacheFiles: Update IMA counters when using dentry_open When IMA is active, using dentry_open without updating the IMA counters will result in free/open imbalance errors when fput is eventually called. Signed-off-by: Marc Dionne Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- fs/cachefiles/rdwr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index 1d833256386..a6c8c6fe8df 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -11,6 +11,7 @@ #include #include +#include #include "internal.h" /* @@ -922,6 +923,7 @@ int cachefiles_write_page(struct fscache_storage *op, struct page *page) if (IS_ERR(file)) { ret = PTR_ERR(file); } else { + ima_counts_get(file); ret = -EIO; if (file->f_op->write) { pos = (loff_t) page->index << PAGE_SHIFT; -- GitLab From f13a48bd798a159291ca583b95453171b88b7448 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 1 Dec 2009 15:36:11 +0000 Subject: [PATCH 1139/1165] SLOW_WORK: Move slow_work's proc file to debugfs Move slow_work's debugging proc file to debugfs. Signed-off-by: David Howells Requested-and-acked-by: Ingo Molnar Signed-off-by: Linus Torvalds --- Documentation/slow-work.txt | 4 ++-- include/linux/slow-work.h | 8 ++++---- init/Kconfig | 8 ++++---- kernel/Makefile | 2 +- .../{slow-work-proc.c => slow-work-debugfs.c} | 4 ++-- kernel/slow-work.c | 18 ++++++++++++------ kernel/slow-work.h | 6 +++--- 7 files changed, 28 insertions(+), 22 deletions(-) rename kernel/{slow-work-proc.c => slow-work-debugfs.c} (97%) diff --git a/Documentation/slow-work.txt b/Documentation/slow-work.txt index 52bc3143372..9dbf4470c7e 100644 --- a/Documentation/slow-work.txt +++ b/Documentation/slow-work.txt @@ -279,9 +279,9 @@ The slow-work thread pool has a number of configurables: VIEWING EXECUTING AND QUEUED ITEMS ================================== -If CONFIG_SLOW_WORK_PROC is enabled, a proc file is made available: +If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available: - /proc/slow_work_rq + /sys/kernel/debug/slow_work/runqueue through which the list of work items being executed and the queues of items to be executed may be viewed. The owner of a work item is given the chance to diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index 5035a269173..13337bf6c3f 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -20,7 +20,7 @@ #include struct slow_work; -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG struct seq_file; #endif @@ -42,8 +42,8 @@ struct slow_work_ops { /* execute a work item */ void (*execute)(struct slow_work *work); -#ifdef CONFIG_SLOW_WORK_PROC - /* describe a work item for /proc */ +#ifdef CONFIG_SLOW_WORK_DEBUG + /* describe a work item for debugfs */ void (*desc)(struct slow_work *work, struct seq_file *m); #endif }; @@ -64,7 +64,7 @@ struct slow_work { #define SLOW_WORK_DELAYED 5 /* item is struct delayed_slow_work with active timer */ const struct slow_work_ops *ops; /* operations table for this item */ struct list_head link; /* link in queue */ -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG struct timespec mark; /* jiffies at which queued or exec begun */ #endif }; diff --git a/init/Kconfig b/init/Kconfig index ab5c64801fe..39923ccc287 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1098,12 +1098,12 @@ config SLOW_WORK See Documentation/slow-work.txt. -config SLOW_WORK_PROC - bool "Slow work debugging through /proc" +config SLOW_WORK_DEBUG + bool "Slow work debugging through debugfs" default n - depends on SLOW_WORK && PROC_FS + depends on SLOW_WORK && DEBUG_FS help - Display the contents of the slow work run queue through /proc, + Display the contents of the slow work run queue through debugfs, including items currently executing. See Documentation/slow-work.txt. diff --git a/kernel/Makefile b/kernel/Makefile index 776ffed1556..d7c13d249b2 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -94,7 +94,7 @@ obj-$(CONFIG_X86_DS) += trace/ obj-$(CONFIG_RING_BUFFER) += trace/ obj-$(CONFIG_SMP) += sched_cpupri.o obj-$(CONFIG_SLOW_WORK) += slow-work.o -obj-$(CONFIG_SLOW_WORK_PROC) += slow-work-proc.o +obj-$(CONFIG_SLOW_WORK_DEBUG) += slow-work-debugfs.o obj-$(CONFIG_PERF_EVENTS) += perf_event.o ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y) diff --git a/kernel/slow-work-proc.c b/kernel/slow-work-debugfs.c similarity index 97% rename from kernel/slow-work-proc.c rename to kernel/slow-work-debugfs.c index 3988032571f..e45c4364529 100644 --- a/kernel/slow-work-proc.c +++ b/kernel/slow-work-debugfs.c @@ -57,7 +57,7 @@ static void slow_work_print_mark(struct seq_file *m, struct slow_work *work) } /* - * Describe a slow work item for /proc + * Describe a slow work item for debugfs */ static int slow_work_runqueue_show(struct seq_file *m, void *v) { @@ -211,7 +211,7 @@ static const struct seq_operations slow_work_runqueue_ops = { }; /* - * open "/proc/slow_work_rq" to list queue contents + * open "/sys/kernel/debug/slow_work/runqueue" to list queue contents */ static int slow_work_runqueue_open(struct inode *inode, struct file *file) { diff --git a/kernel/slow-work.c b/kernel/slow-work.c index b5c17f15f9d..00889bd3c59 100644 --- a/kernel/slow-work.c +++ b/kernel/slow-work.c @@ -16,7 +16,7 @@ #include #include #include -#include +#include #include "slow-work.h" static void slow_work_cull_timeout(unsigned long); @@ -138,7 +138,7 @@ static void slow_work_clear_thread_processing(int id) {} /* * Data for tracking currently executing items for indication through /proc */ -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG struct slow_work *slow_work_execs[SLOW_WORK_THREAD_LIMIT]; pid_t slow_work_pids[SLOW_WORK_THREAD_LIMIT]; DEFINE_RWLOCK(slow_work_execs_lock); @@ -823,7 +823,7 @@ static void slow_work_new_thread_execute(struct slow_work *work) static const struct slow_work_ops slow_work_new_thread_ops = { .owner = THIS_MODULE, .execute = slow_work_new_thread_execute, -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG .desc = slow_work_new_thread_desc, #endif }; @@ -1055,9 +1055,15 @@ static int __init init_slow_work(void) if (slow_work_max_max_threads < nr_cpus * 2) slow_work_max_max_threads = nr_cpus * 2; #endif -#ifdef CONFIG_SLOW_WORK_PROC - proc_create("slow_work_rq", S_IFREG | 0400, NULL, - &slow_work_runqueue_fops); +#ifdef CONFIG_SLOW_WORK_DEBUG + { + struct dentry *dbdir; + + dbdir = debugfs_create_dir("slow_work", NULL); + if (dbdir && !IS_ERR(dbdir)) + debugfs_create_file("runqueue", S_IFREG | 0400, dbdir, + NULL, &slow_work_runqueue_fops); + } #endif return 0; } diff --git a/kernel/slow-work.h b/kernel/slow-work.h index 3c2f007f3ad..321f3c59d73 100644 --- a/kernel/slow-work.h +++ b/kernel/slow-work.h @@ -19,7 +19,7 @@ /* * slow-work.c */ -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG extern struct slow_work *slow_work_execs[]; extern pid_t slow_work_pids[]; extern rwlock_t slow_work_execs_lock; @@ -30,9 +30,9 @@ extern struct list_head vslow_work_queue; extern spinlock_t slow_work_queue_lock; /* - * slow-work-proc.c + * slow-work-debugfs.c */ -#ifdef CONFIG_SLOW_WORK_PROC +#ifdef CONFIG_SLOW_WORK_DEBUG extern const struct file_operations slow_work_runqueue_fops; extern void slow_work_new_thread_desc(struct slow_work *, struct seq_file *); -- GitLab From 2b5e63f6b8f6566161a261a9face1de433d6608e Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Thu, 19 Nov 2009 16:40:09 +0000 Subject: [PATCH 1140/1165] MIPS: IP22/IP28 Disable early printk to fix boot problems on some systems. Some Debian users have reported that the kernel hangs early during boot on some IP22 systems. Thomas Bogendoerfer found that this is due to a "bad interaction between CONFIG_EARLY_PRINTK and overwritten prom memory during early boot". Since there's no fix yet, disable CONFIG_EARLY_PRINTK for now. Signed-off-by: Martin Michlmayr Cc: linux-mips@linux-mips.org Cc: Thomas Bogendoerfer Cc: Dmitri Vorobiev Patchwork: http://patchwork.linux-mips.org/patch/702/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 1aad0d9f507..ffdd651c54b 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -358,7 +358,14 @@ config SGI_IP22 select SWAP_IO_SPACE select SYS_HAS_CPU_R4X00 select SYS_HAS_CPU_R5000 - select SYS_HAS_EARLY_PRINTK + # + # Disable EARLY_PRINTK for now since it leads to overwritten prom + # memory during early boot on some machines. + # + # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com + # for a more details discussion + # + # select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN @@ -410,7 +417,14 @@ config SGI_IP28 select SGI_HAS_ZILOG select SWAP_IO_SPACE select SYS_HAS_CPU_R10000 - select SYS_HAS_EARLY_PRINTK + # + # Disable EARLY_PRINTK for now since it leads to overwritten prom + # memory during early boot on some machines. + # + # See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com + # for a more details discussion + # + # select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN help -- GitLab From c677189af9faa3f26fae0fcb7ac59f477048b89a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 24 Nov 2009 13:16:02 +0000 Subject: [PATCH 1141/1165] MIPS: Fix build error if __xchg() is not getting inlined. If __xchg() is not getting inlined the outline version of the function will have a reference to __xchg_called_with_bad_pointer() which does not exist remaining. Fixed by using BUILD_BUG_ON() to check for allowable operand sizes. Signed-off-by: Ralf Baechle Patchwork: http://patchwork.linux-mips.org/patch/705/ --- arch/mips/include/asm/system.h | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h index fcf5f98d90c..83b5509e09e 100644 --- a/arch/mips/include/asm/system.h +++ b/arch/mips/include/asm/system.h @@ -12,6 +12,7 @@ #ifndef _ASM_SYSTEM_H #define _ASM_SYSTEM_H +#include #include #include @@ -193,10 +194,6 @@ extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 v #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels #endif -/* This function doesn't exist, so you'll get a linker error - if something tries to do an invalid xchg(). */ -extern void __xchg_called_with_bad_pointer(void); - static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) { switch (size) { @@ -205,11 +202,17 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz case 8: return __xchg_u64(ptr, x); } - __xchg_called_with_bad_pointer(); + return x; } -#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))) +#define xchg(ptr, x) \ +({ \ + BUILD_BUG_ON(sizeof(*(ptr)) & ~0xc); \ + \ + ((__typeof__(*(ptr))) \ + __xchg((unsigned long)(x), (ptr), sizeof(*(ptr)))); \ +}) extern void set_handler(unsigned long offset, void *addr, unsigned long len); extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len); -- GitLab From e1eb3a983befdb422e1aae299bdab573d04929f6 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 26 Nov 2009 18:28:42 +0000 Subject: [PATCH 1142/1165] MIPS: Add missing definition for MADV_HWPOISON. Thanks to Joseph S. Myers for reporting this. Signed-off-by: Ralf Baechle Cc: "Joseph S. Myers" Patchwork: http://patchwork.linux-mips.org/patch/723/ --- arch/mips/include/asm/mman.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/include/asm/mman.h b/arch/mips/include/asm/mman.h index a2250f390a2..c892bfb3e2c 100644 --- a/arch/mips/include/asm/mman.h +++ b/arch/mips/include/asm/mman.h @@ -75,6 +75,7 @@ #define MADV_MERGEABLE 12 /* KSM may merge identical pages */ #define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */ +#define MADV_HWPOISON 100 /* poison a page for testing */ /* compatibility flags */ #define MAP_FILE 0 -- GitLab From 315fe625f878749a7d2b6b65a40c29bbbe6e1dc7 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 1 Dec 2009 14:55:25 +0800 Subject: [PATCH 1143/1165] MIPS: Loongson: Disallow 4kB pages Currently, with PAGE_SIZE_4KB, the kernel for loongson will hang on: Kernel panic - not syncing: Attempted to kill init! The possible reason is the cache aliases problem: Loongson 2F has 64kb, 4 way L1 Cache, the way size is 16kb, which is bigger then 4kb. so, If using 4kb page size, there is cache aliases problem. To avoid this kind of problem, extra cache flushing. The 2nd possible solution is 16kb page size which avoids cache aliases without the need for extra cache flushes. So we disable 4kB pages until the aliasing issue is solved. Signed-off-by: Wu Zhangjin Patchwork: http://patchwork.linux-mips.org/patch/736/ Cc: linux-mips@linux-mips.org Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index ffdd651c54b..e232e50e6a0 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1453,6 +1453,7 @@ choice config PAGE_SIZE_4KB bool "4kB" + depends on !CPU_LOONGSON2 help This option select the standard 4kB Linux page size. On some R3000-family processors this is the only available page size. Using -- GitLab From f133f22dd6f413bdf71ebf7e00ce441d98ac7c87 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 1 Dec 2009 14:55:42 +0800 Subject: [PATCH 1144/1165] MIPS: Loongson: Switch from flatmem to sparsemem With flatmem hibernation for Loongson will fail, and there are also some other problems such as broken files when using NFS or CIFS / Samba. The config help of sparsemem says: "This option provides some potential performance benefits, along with decreased code complexity." So to avoid the potential problems of FLATMEM, we disable FLATMEM directly and use SPARSEMEM instead. Related email thread: http://groups.google.com/group/loongson-dev/browse_thread/thread/b6b65890ec2b0f24/feb43e5aa7f55d9b?show_docid=feb43e5aa7f55d9b Reported-by: Tatu Kilappa Signed-off-by: Wu Zhangjin Patchwork: http://patchwork.linux-mips.org/patch/737/ Cc: linux-mips@linux-mips.org Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e232e50e6a0..fd7620f025f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1778,7 +1778,7 @@ config SYS_SUPPORTS_SMARTMIPS config ARCH_FLATMEM_ENABLE def_bool y - depends on !NUMA + depends on !NUMA && !CPU_LOONGSON2 config ARCH_DISCONTIGMEM_ENABLE bool -- GitLab From 4c4cb1b1605e50983afd7924980c9434b214599f Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 1 Dec 2009 13:17:41 -0800 Subject: [PATCH 1145/1165] drivers/media/dvb/dvb-core/dvb_frontend.c: needs semaphore.h Fixes: v4l/dvb_frontend.c: In function 'dvb_frontend_stop': v4l/dvb_frontend.c:707: error: implicit declaration of function 'init_MUTEX' Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14609 Reported-by: Cc: Mauro Carvalho Chehab Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/media/dvb/dvb-core/dvb_frontend.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index ddf639ed2fd..98082416aa5 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include -- GitLab From fa00e106eb6f082654d822a0946c0c86297ede2c Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 1 Dec 2009 13:17:41 -0800 Subject: [PATCH 1146/1165] drivers/rtc/rtc-pcf50633.c: fix use after free in pcf50633_rtc_probe() "rtc" is freed and then dereferenced on the next line. This patch fixes that. Signed-off-by: Dan Carpenter Acked-by: Alessandro Zummo Cc: David Brownell Cc: Paul Gortmaker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf50633.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c index 33a10c47260..4c5d5d0c4cf 100644 --- a/drivers/rtc/rtc-pcf50633.c +++ b/drivers/rtc/rtc-pcf50633.c @@ -292,8 +292,9 @@ static int __devinit pcf50633_rtc_probe(struct platform_device *pdev) &pcf50633_rtc_ops, THIS_MODULE); if (IS_ERR(rtc->rtc_dev)) { + int ret = PTR_ERR(rtc->rtc_dev); kfree(rtc); - return PTR_ERR(rtc->rtc_dev); + return ret; } pcf50633_register_irq(rtc->pcf, PCF50633_IRQ_ALARM, -- GitLab From 3510b8f7f53bf0ded13888724734bba87d22ecc3 Mon Sep 17 00:00:00 2001 From: Sudhakar Rajashekhara Date: Tue, 1 Dec 2009 13:17:43 -0800 Subject: [PATCH 1147/1165] davinci: fb: fix frame buffer driver issues Following issues have been addressed on DA8XX/OMAP-L1XX: a. Screen misalignment during booting when frame buffer console is enabled. b. Driver was configured always in PSEUDOCOLOR mode. This patch dynamically configures the driver either in PSEUDOCOLOUR or TRUECOLOR mode depending on bpp. c. The RED and BLUE offsets were interchanged resulting in wrong bootup logo colour. This patch has been tested on DA830/OMAP-L137 and DA850/OMAP-L138 EVMs. Signed-off-by: Sudhakar Rajashekhara Cc: Steve Chen Cc: Pavel Kiryukhin Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/da8xx-fb.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c index 035d56835b7..ea1fd3f4751 100644 --- a/drivers/video/da8xx-fb.c +++ b/drivers/video/da8xx-fb.c @@ -554,11 +554,11 @@ static int fb_check_var(struct fb_var_screeninfo *var, var->transp.length = 0; break; case 16: /* RGB 565 */ - var->red.offset = 0; + var->red.offset = 11; var->red.length = 5; var->green.offset = 5; var->green.length = 6; - var->blue.offset = 11; + var->blue.offset = 0; var->blue.length = 5; var->transp.offset = 0; var->transp.length = 0; @@ -591,7 +591,7 @@ static int __devexit fb_remove(struct platform_device *dev) unregister_framebuffer(info); fb_dealloc_cmap(&info->cmap); dma_free_coherent(NULL, par->databuf_sz + PAGE_SIZE, - info->screen_base, + info->screen_base - PAGE_SIZE, info->fix.smem_start); free_irq(par->irq, par); clk_disable(par->lcdc_clk); @@ -749,6 +749,7 @@ static int __init fb_probe(struct platform_device *device) (PAGE_SIZE - par->palette_sz); /* the rest of the frame buffer is pixel data */ + da8xx_fb_info->screen_base = par->v_palette_base + par->palette_sz; da8xx_fb_fix.smem_start = par->p_palette_base + par->palette_sz; da8xx_fb_fix.smem_len = par->databuf_sz - par->palette_sz; da8xx_fb_fix.line_length = (lcdc_info->width * lcd_cfg->bpp) / 8; @@ -787,6 +788,8 @@ static int __init fb_probe(struct platform_device *device) da8xx_fb_info->var = da8xx_fb_var; da8xx_fb_info->fbops = &da8xx_fb_ops; da8xx_fb_info->pseudo_palette = par->pseudo_palette; + da8xx_fb_info->fix.visual = (da8xx_fb_info->var.bits_per_pixel <= 8) ? + FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_TRUECOLOR; ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0); if (ret) @@ -825,7 +828,7 @@ err_free_irq: err_release_fb_mem: dma_free_coherent(NULL, par->databuf_sz + PAGE_SIZE, - da8xx_fb_info->screen_base, + da8xx_fb_info->screen_base - PAGE_SIZE, da8xx_fb_info->fix.smem_start); err_release_fb: -- GitLab From 974348435c6d7b65fd6d8857b4809b0ff208d323 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Tue, 1 Dec 2009 13:17:44 -0800 Subject: [PATCH 1148/1165] kbuild: stepping down as maintainer It has been fun but the last year or more it has been a duty and a burden. So I leave it open for others to take over. Signed-off-by: Sam Ravnborg Cc: Anibal Monsalve Salazar Cc: Steven Rostedt Cc: Michal Marek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 16129e67678..4f96ac81089 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3015,11 +3015,8 @@ S: Maintained F: fs/autofs4/ KERNEL BUILD -M: Sam Ravnborg -T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git L: linux-kbuild@vger.kernel.org -S: Maintained +S: Orphan F: Documentation/kbuild/ F: Makefile F: scripts/Makefile.* -- GitLab From ca0297015d4f117005718e01aa368875abcccbc5 Mon Sep 17 00:00:00 2001 From: Alek Du Date: Tue, 1 Dec 2009 13:17:45 -0800 Subject: [PATCH 1149/1165] gpio: Langwell GPIO driver bugfixes - Remove wrong and unnecessary unmask operation - Remove extra GEDR reading This fixes the loss of interrupts which occurs when two or more pins are triggered in close succession. Signed-off-by: Alek Du Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/langwell_gpio.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c index 5711ce5353c..4baf3d7d0f8 100644 --- a/drivers/gpio/langwell_gpio.c +++ b/drivers/gpio/langwell_gpio.c @@ -144,13 +144,6 @@ static int lnw_irq_type(unsigned irq, unsigned type) static void lnw_irq_unmask(unsigned irq) { - struct lnw_gpio *lnw = get_irq_chip_data(irq); - u32 gpio = irq - lnw->irq_base; - u8 reg = gpio / 32; - void __iomem *gedr; - - gedr = (void __iomem *)(&lnw->reg_base->GEDR[reg]); - writel(BIT(gpio % 32), gedr); }; static void lnw_irq_mask(unsigned irq) @@ -183,13 +176,11 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc) gedr_v = readl(gedr); if (!gedr_v) continue; - for (gpio = reg*32; gpio < reg*32+32; gpio++) { - gedr_v = readl(gedr); + for (gpio = reg*32; gpio < reg*32+32; gpio++) if (gedr_v & BIT(gpio % 32)) { pr_debug("pin %d triggered\n", gpio); generic_handle_irq(lnw->irq_base + gpio); } - } /* clear the edge detect status bit */ writel(gedr_v, gedr); } -- GitLab From 0a1f127a0594d62cb23c26732686d0e2b097b264 Mon Sep 17 00:00:00 2001 From: Peter Horton Date: Tue, 1 Dec 2009 13:17:46 -0800 Subject: [PATCH 1150/1165] aoe: prevent cache aliases Prevent the AoE block driver from creating cache aliases of page cache pages on machines with virtually indexed caches. Building kernels on an AT91SAM9G20 board without this patch fails with segmentation faults after a couple of passes. Signed-off-by: Peter Horton Cc: "Ed L. Cashin" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/block/aoe/aoecmd.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index 965ece2c7e4..13bb69d2abb 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -735,6 +735,21 @@ diskstats(struct gendisk *disk, struct bio *bio, ulong duration, sector_t sector part_stat_unlock(); } +/* + * Ensure we don't create aliases in VI caches + */ +static inline void +killalias(struct bio *bio) +{ + struct bio_vec *bv; + int i; + + if (bio_data_dir(bio) == READ) + __bio_for_each_segment(bv, bio, i, 0) { + flush_dcache_page(bv->bv_page); + } +} + void aoecmd_ata_rsp(struct sk_buff *skb) { @@ -853,8 +868,12 @@ aoecmd_ata_rsp(struct sk_buff *skb) if (buf && --buf->nframesout == 0 && buf->resid == 0) { diskstats(d->gd, buf->bio, jiffies - buf->stime, buf->sector); - n = (buf->flags & BUFFL_FAIL) ? -EIO : 0; - bio_endio(buf->bio, n); + if (buf->flags & BUFFL_FAIL) + bio_endio(buf->bio, -EIO); + else { + killalias(buf->bio); + bio_endio(buf->bio, 0); + } mempool_free(buf, d->bufpool); } -- GitLab From 48a7f7746875425797aea31ed2910088635c1c7a Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 1 Dec 2009 13:17:48 -0800 Subject: [PATCH 1151/1165] rtc-x1205: fix rtc_time to y2k register value conversion The possible CCR_Y2K register values are 19 or 20 and struct rtc_time's tm_year is in years since 1900. The function translating rtc_time to register values assumes tm_year to be years since first christmas, though, and we end up storing 0 or 1 in the CCR_Y2K register, which the hardware does not refuse to do. A subsequent probing of the clock fails due to the invalid value range in the register, though. [ And if it didn't, reading the clock would yield a bogus year because the function translating registers to tm_year is assuming a register value of 19 or 20. ] This fixes the conversion from years since 1900 in tm_year to the corresponding CCR_Y2K value of 19 or 20. Signed-off-by: Johannes Weiner Cc: Alessandro Zummo Cc: Paul Gortmaker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-x1205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index 310c10795e9..cc9ba47b215 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -195,7 +195,7 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, /* year, since the rtc epoch*/ buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100); buf[CCR_WDAY] = tm->tm_wday & 0x07; - buf[CCR_Y2K] = bin2bcd(tm->tm_year / 100); + buf[CCR_Y2K] = bin2bcd((tm->tm_year + 1900) / 100); } /* If writing alarm registers, set compare bits on registers 0-4 */ -- GitLab From cb8799eeddd542abd504c62c11014dfbaec7f3a1 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 1 Dec 2009 13:17:49 -0800 Subject: [PATCH 1152/1165] rtc-x1205: reset clock to sane state after power failure When detecting power failure, the probe function would reset the clock time to defined state. However, the clock's _date_ might still be bogus and a subsequent probe fails when sanity-checking these values. Change the power-failure fixup code to do a full setting of rtc_time, including a valid date. Signed-off-by: Johannes Weiner Cc: Alessandro Zummo Cc: Paul Gortmaker Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-x1205.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index cc9ba47b215..6583c1a8b07 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -280,9 +280,9 @@ static int x1205_fix_osc(struct i2c_client *client) int err; struct rtc_time tm; - tm.tm_hour = tm.tm_min = tm.tm_sec = 0; + memset(&tm, 0, sizeof(tm)); - err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0); + err = x1205_set_datetime(client, &tm, 1, X1205_CCR_BASE, 0); if (err < 0) dev_err(&client->dev, "unable to restart the oscillator\n"); -- GitLab From e9438e3193a0d1430b70fafe46855c1a56202f7c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 1 Dec 2009 13:17:50 -0800 Subject: [PATCH 1153/1165] sysfs: fix SYSFS_DEPRECATED_V2 prompt The SYSFS_DEPRECATED_V2 says "remove" older, deprecated features, but it actually enables them, so correct this confusing, backwards text. Signed-off-by: Randy Dunlap Cc: Kay Sievers Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- init/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/Kconfig b/init/Kconfig index 39923ccc287..eb4b33725db 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -606,7 +606,7 @@ config SYSFS_DEPRECATED bool config SYSFS_DEPRECATED_V2 - bool "remove sysfs features which may confuse old userspace tools" + bool "enable deprecated sysfs features which may confuse old userspace tools" depends on SYSFS default n select SYSFS_DEPRECATED -- GitLab From be088b139f5244b23ee931afb195eee236b7ff33 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 24 Nov 2009 21:06:26 -0500 Subject: [PATCH 1154/1165] [WATCHDOG] rc32434_wdt.c: use resource_size() The size value passed to ioremap_nocache() is not correct. Use resource_size() to get the correct value. Signed-off-by: H Hartley Sweeten Cc: Phil Sutter Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/rc32434_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index f6cccc9df02..3764af11065 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -276,7 +276,7 @@ static int __devinit rc32434_wdt_probe(struct platform_device *pdev) return -ENODEV; } - wdt_reg = ioremap_nocache(r->start, r->end - r->start); + wdt_reg = ioremap_nocache(r->start, resource_size(r)); if (!wdt_reg) { printk(KERN_ERR PFX "failed to remap I/O resources\n"); return -ENXIO; -- GitLab From 810a90ae4d2a9f6d9ff80424accbd6f91947e981 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 2 Dec 2009 13:21:23 +0100 Subject: [PATCH 1155/1165] [PATCH] rc32434_wdt: fix compilation failure This patch fixes the compilation failure of rc32434 due to a bad module parameter description. Signed-off-by: Florian Fainelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/rc32434_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c index 3764af11065..bf12d06b587 100644 --- a/drivers/watchdog/rc32434_wdt.c +++ b/drivers/watchdog/rc32434_wdt.c @@ -62,7 +62,7 @@ extern unsigned int idt_cpu_freq; static int timeout = WATCHDOG_TIMEOUT; module_param(timeout, int, 0); MODULE_PARM_DESC(timeout, "Watchdog timeout value, in seconds (default=" - WATCHDOG_TIMEOUT ")"); + __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -- GitLab From 5d6b1edf8ccc4b7e4e77dff3fc80882833d6186e Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 1 Dec 2009 18:17:18 +0100 Subject: [PATCH 1156/1165] [ARM] pxamci: call mmc_remove_host() before freeing resources mmc_remove_host() will cause the mmc core to switch off the bus power by eventually calling pxamci_set_ios(). This function uses the regulator or the GPIO which have been freed already. This causes the following Oops on module unload. [ 49.519649] Unable to handle kernel paging request at virtual address 30303a70 [ 49.526878] pgd = c7084000 [ 49.529563] [30303a70] *pgd=00000000 [ 49.533136] Internal error: Oops: 5 [#1] [ 49.537025] last sysfs file: /sys/devices/platform/pxa27x-ohci/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_level [ 49.547471] Modules linked in: pxamci(-) eeti_ts [ 49.552061] CPU: 0 Not tainted (2.6.32-rc8 #322) [ 49.557001] PC is at regulator_is_enabled+0x3c/0xbc [ 49.561846] LR is at regulator_is_enabled+0x30/0xbc [ 49.566691] pc : [] lr : [] psr: 60000013 [ 49.566702] sp : c7083e70 ip : 30303a30 fp : 00000000 [ 49.578093] r10: c705e200 r9 : c7082000 r8 : c705e2e0 [ 49.583280] r7 : c7061340 r6 : c7061340 r5 : c7083e70 r4 : 00000000 [ 49.589759] r3 : c04dc434 r2 : c04dc434 r1 : c03eecea r0 : 00000047 [ 49.596241] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 49.603329] Control: 0000397f Table: a7084018 DAC: 00000015 [ 49.609031] Process rmmod (pid: 1101, stack limit = 0xc7082278) [ 49.614908] Stack: (0xc7083e70 to 0xc7084000) [ 49.619238] 3e60: c7082000 c703c4f8 c705ea00 c04f4074 [ 49.627366] 3e80: 00000000 c705e3a0 ffffffff c0247ddc c70361a0 00000000 c705e3a0 ffffffff [ 49.635499] 3ea0: c705e200 bf006400 c78c4f00 c705e200 c705e3a0 ffffffff c705e200 ffffffff [ 49.643633] 3ec0: c04d8ac8 c02476d0 ffffffff c0247c60 c705e200 c0248678 c705e200 c0249064 [ 49.651765] 3ee0: ffffffff bf006204 c04d8ad0 c04d8ad0 c04d8ac8 bf007490 00000880 c00440c4 [ 49.659898] 3f00: 0000b748 c01c5708 bf007490 c01c44c8 c04d8ac8 c04d8afc bf007490 c01c4570 [ 49.668031] 3f20: bf007490 bf00750c c04f4258 c01c37a4 00000000 bf00750c c7083f44 c007b014 [ 49.676162] 3f40: 4000d000 6d617870 08006963 00000001 00000000 c7085000 00000001 00000000 [ 49.684287] 3f60: 4000d000 c7083f8c 00000001 bea01a54 00005401 c7ab1400 c00440c4 00082000 [ 49.692420] 3f80: bf00750c 00000880 c7083f8c 00000000 4000cfa8 00000000 00000880 bea01cc8 [ 49.700552] 3fa0: 00000081 c0043f40 00000000 00000880 bea01cc8 00000880 00000006 00000000 [ 49.708677] 3fc0: 00000000 00000880 bea01cc8 00000081 00000097 0000cca4 0000b748 00000000 [ 49.716802] 3fe0: 4001a4f0 bea01cc0 00018bf4 4001a4fc 20000010 bea01cc8 a063e021 a063e421 [ 49.724958] [] (regulator_is_enabled+0x3c/0xbc) from [] (mmc_regulator_set_ocr+0x14/0xd8) [ 49.734836] [] (mmc_regulator_set_ocr+0x14/0xd8) from [] (pxamci_set_ios+0xd8/0x17c [pxamci]) [ 49.745044] [] (pxamci_set_ios+0xd8/0x17c [pxamci]) from [] (mmc_power_off+0x50/0x58) [ 49.754555] [] (mmc_power_off+0x50/0x58) from [] (mmc_detach_bus+0x68/0xc4) [ 49.763207] [] (mmc_detach_bus+0x68/0xc4) from [] (mmc_stop_host+0xd4/0x1bc) [ 49.771944] [] (mmc_stop_host+0xd4/0x1bc) from [] (mmc_remove_host+0xc/0x20) [ 49.780681] [] (mmc_remove_host+0xc/0x20) from [] (pxamci_remove+0xc8/0x174 [pxamci]) [ 49.790211] [] (pxamci_remove+0xc8/0x174 [pxamci]) from [] (platform_drv_remove+0x1c/0x24) [ 49.800164] [] (platform_drv_remove+0x1c/0x24) from [] (__device_release_driver+0x7c/0xc4) [ 49.810110] [] (__device_release_driver+0x7c/0xc4) from [] (driver_detach+0x60/0x8c) [ 49.819535] [] (driver_detach+0x60/0x8c) from [] (bus_remove_driver+0x90/0xcc) [ 49.828452] [] (bus_remove_driver+0x90/0xcc) from [] (sys_delete_module+0x1d8/0x254) [ 49.837891] [] (sys_delete_module+0x1d8/0x254) from [] (ret_fast_syscall+0x0/0x28) [ 49.847145] Code: eb06c53a e596c030 e1a0500d e59f106c (e59c0040) [ 49.853566] ---[ end trace b5fa66a00cea142f ]--- Signed-off-by: Daniel Mack Reported-by: Sven Neumann Cc: Pierre Ossman Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@kernel.org Signed-off-by: Eric Miao --- drivers/mmc/host/pxamci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index b00d6731905..9fb480bb0e0 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -760,6 +760,8 @@ static int pxamci_remove(struct platform_device *pdev) if (mmc) { struct pxamci_host *host = mmc_priv(mmc); + mmc_remove_host(mmc); + if (host->pdata) { gpio_cd = host->pdata->gpio_card_detect; gpio_ro = host->pdata->gpio_card_ro; @@ -779,8 +781,6 @@ static int pxamci_remove(struct platform_device *pdev) if (host->pdata && host->pdata->exit) host->pdata->exit(&pdev->dev, mmc); - mmc_remove_host(mmc); - pxamci_stop_clock(host); writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD| END_CMD_RES|PRG_DONE|DATA_TRAN_DONE, -- GitLab From a91be9ee69b09cdaa02afd5d7056bc2e6d382cfe Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 2 Dec 2009 11:33:03 +0000 Subject: [PATCH 1157/1165] MIPS: Fix MIPS I build. Broken by d63c63e889bbeeaa461a8addf1245f89f3ce4ece (lmo) rsp. f1e39a4a616cd9981a9decfd5332fd07a01abb8b (kernel.org). Signed-off-by: Ralf Baechle Patchwork: http://patchwork.linux-mips.org/patch/746/ --- arch/mips/kernel/syscall.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 3fe1fcfa2e7..fe0d7980560 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -306,6 +306,7 @@ static inline int mips_atomic_set(struct pt_regs *regs, if (cpu_has_llsc && R10000_LLSC_WAR) { __asm__ __volatile__ ( + " .set mips3 \n" " li %[err], 0 \n" "1: ll %[old], (%[addr]) \n" " move %[tmp], %[new] \n" @@ -320,6 +321,7 @@ static inline int mips_atomic_set(struct pt_regs *regs, " "STR(PTR)" 1b, 4b \n" " "STR(PTR)" 2b, 4b \n" " .previous \n" + " .set mips0 \n" : [old] "=&r" (old), [err] "=&r" (err), [tmp] "=&r" (tmp) @@ -329,6 +331,7 @@ static inline int mips_atomic_set(struct pt_regs *regs, : "memory"); } else if (cpu_has_llsc) { __asm__ __volatile__ ( + " .set mips3 \n" " li %[err], 0 \n" "1: ll %[old], (%[addr]) \n" " move %[tmp], %[new] \n" @@ -347,6 +350,7 @@ static inline int mips_atomic_set(struct pt_regs *regs, " "STR(PTR)" 1b, 5b \n" " "STR(PTR)" 2b, 5b \n" " .previous \n" + " .set mips0 \n" : [old] "=&r" (old), [err] "=&r" (err), [tmp] "=&r" (tmp) -- GitLab From 4e7c81af3fa076e2d1534cc665ea2f623e631f5d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 2 Dec 2009 13:07:01 +0100 Subject: [PATCH 1158/1165] MIPS: RB532: Fix devices.c compilation. We should now use dev_set_drvdata to set the driver driver_data field. Signed-off-by: Florian Fainelli Patchwork: http://patchwork.linux-mips.org/patch/747/ Signed-off-by: Ralf Baechle --- arch/mips/rb532/devices.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c index 9f40e1ff9b4..041fc1afc3f 100644 --- a/arch/mips/rb532/devices.c +++ b/arch/mips/rb532/devices.c @@ -110,7 +110,6 @@ static struct korina_device korina_dev0_data = { static struct platform_device korina_dev0 = { .id = -1, .name = "korina", - .dev.driver_data = &korina_dev0_data, .resource = korina_dev0_res, .num_resources = ARRAY_SIZE(korina_dev0_res), }; @@ -332,6 +331,8 @@ static int __init plat_setup_devices(void) /* set the uart clock to the current cpu frequency */ rb532_uart_res[0].uartclk = idt_cpu_freq; + dev_set_drvdata(&korina_dev0.dev, &korina_dev0_data); + return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs)); } -- GitLab From e8092da92e1fd38dc7c38a4eeae93eaa21764584 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 30 Nov 2009 14:01:56 +0000 Subject: [PATCH 1159/1165] regulator: Initialise wm831x structure pointor for ISINK driver The version that made it into mainline missed the initialisation of the chip handle. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/wm831x-isink.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c index 1d8d9879d3a..48857008758 100644 --- a/drivers/regulator/wm831x-isink.c +++ b/drivers/regulator/wm831x-isink.c @@ -167,6 +167,8 @@ static __devinit int wm831x_isink_probe(struct platform_device *pdev) return -ENOMEM; } + isink->wm831x = wm831x; + res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (res == NULL) { dev_err(&pdev->dev, "No I/O resource\n"); -- GitLab From 35dead4235e2b67da7275b4122fed37099c2f462 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Thu, 3 Dec 2009 00:29:15 +0100 Subject: [PATCH 1160/1165] modules: don't export section names of empty sections via sysfs On the parisc architecture we face for each and every loaded kernel module this kernel "badness warning": sysfs: cannot create duplicate filename '/module/ac97_bus/sections/.text' Badness at fs/sysfs/dir.c:487 Reason for that is, that on parisc all kernel modules do have multiple .text sections due to the usage of the -ffunction-sections compiler flag which is needed to reach all jump targets on this platform. An objdump on such a kernel module gives: Sections: Idx Name Size VMA LMA File off Algn 0 .note.gnu.build-id 00000024 00000000 00000000 00000034 2**2 CONTENTS, ALLOC, LOAD, READONLY, DATA 1 .text 00000000 00000000 00000000 00000058 2**0 CONTENTS, ALLOC, LOAD, READONLY, CODE 2 .text.ac97_bus_match 0000001c 00000000 00000000 00000058 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE 3 .text 00000000 00000000 00000000 000000d4 2**0 CONTENTS, ALLOC, LOAD, READONLY, CODE ... Since the .text sections are empty (size of 0 bytes) and won't be loaded by the kernel module loader anyway, I don't see a reason why such sections need to be listed under /sys/module//sections/ either. The attached patch does solve this issue by not exporting section names which are empty. This fixes bugzilla http://bugzilla.kernel.org/show_bug.cgi?id=14703 Signed-off-by: Helge Deller CC: rusty@rustcorp.com.au CC: akpm@linux-foundation.org CC: James.Bottomley@HansenPartnership.com CC: roland@redhat.com CC: dave@hiauly1.hia.nrc.ca Signed-off-by: Linus Torvalds --- kernel/module.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/module.c b/kernel/module.c index 8b7d8805819..5842a71cf05 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1187,7 +1187,8 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect, /* Count loaded sections and allocate structures */ for (i = 0; i < nsect; i++) - if (sechdrs[i].sh_flags & SHF_ALLOC) + if (sechdrs[i].sh_flags & SHF_ALLOC + && sechdrs[i].sh_size) nloaded++; size[0] = ALIGN(sizeof(*sect_attrs) + nloaded * sizeof(sect_attrs->attrs[0]), @@ -1207,6 +1208,8 @@ static void add_sect_attrs(struct module *mod, unsigned int nsect, for (i = 0; i < nsect; i++) { if (! (sechdrs[i].sh_flags & SHF_ALLOC)) continue; + if (!sechdrs[i].sh_size) + continue; sattr->address = sechdrs[i].sh_addr; sattr->name = kstrdup(secstrings + sechdrs[i].sh_name, GFP_KERNEL); -- GitLab From f066a4f6df68f03b565dfe867dde54dfeb26576e Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Tue, 1 Dec 2009 14:56:44 +1030 Subject: [PATCH 1161/1165] param: don't complain about unused module parameters. Jon confirms that recent modprobe will look in /proc/cmdline, so these cmdline options can still be used. See http://bugzilla.kernel.org/show_bug.cgi?id=14164 Reported-by: Adam Williamson Cc: stable@kernel.org Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds --- init/main.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/init/main.c b/init/main.c index 5988debfc50..4051d75dd2d 100644 --- a/init/main.c +++ b/init/main.c @@ -251,7 +251,7 @@ early_param("loglevel", loglevel); /* * Unknown boot options get handed to init, unless they look like - * failed parameters + * unused parameters (modprobe will find them in /proc/cmdline). */ static int __init unknown_bootoption(char *param, char *val) { @@ -272,14 +272,9 @@ static int __init unknown_bootoption(char *param, char *val) if (obsolete_checksetup(param)) return 0; - /* - * Preemptive maintenance for "why didn't my misspelled command - * line work?" - */ - if (strchr(param, '.') && (!val || strchr(param, '.') < val)) { - printk(KERN_ERR "Unknown boot option `%s': ignoring\n", param); + /* Unused module parameter. */ + if (strchr(param, '.') && (!val || strchr(param, '.') < val)) return 0; - } if (panic_later) return 0; -- GitLab From 049e2d13b8e8a6d8be43e675a5ed9d4613819f65 Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Tue, 1 Dec 2009 01:14:25 -0800 Subject: [PATCH 1162/1165] Input: i8042 - add Dell Vostro 1320, 1520 and 1720 to the reset list These laptops often leave i8042 in a wierd state resulting in non- operational touchpad and keyboard. Signed-off-by: Anisse Astier Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds --- drivers/input/serio/i8042-x86ia64io.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index a537925f765..2bcf1ace27c 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -447,6 +447,27 @@ static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "N10"), }, }, + { + .ident = "Dell Vostro 1320", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1320"), + }, + }, + { + .ident = "Dell Vostro 1520", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1520"), + }, + }, + { + .ident = "Dell Vostro 1720", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 1720"), + }, + }, { } }; -- GitLab From dbf763a2f1c117cfe45bbbd2c874a150f0e0900b Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 3 Sep 2009 22:59:01 +0900 Subject: [PATCH 1163/1165] SPI: spi_txx9: Fix bit rate calculation TXx9 SPI bit rate is calculated by: fBR = (spi-baseclk) / (n + 1) Fix calculation of min_speed_hz, max_speed_hz and n. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- drivers/spi/spi_txx9.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi_txx9.c b/drivers/spi/spi_txx9.c index 96057de133a..19f75627c3d 100644 --- a/drivers/spi/spi_txx9.c +++ b/drivers/spi/spi_txx9.c @@ -29,6 +29,8 @@ #define SPI_FIFO_SIZE 4 +#define SPI_MAX_DIVIDER 0xff /* Max. value for SPCR1.SER */ +#define SPI_MIN_DIVIDER 1 /* Min. value for SPCR1.SER */ #define TXx9_SPMCR 0x00 #define TXx9_SPCR0 0x04 @@ -193,11 +195,8 @@ static void txx9spi_work_one(struct txx9spi *c, struct spi_message *m) if (prev_speed_hz != speed_hz || prev_bits_per_word != bits_per_word) { - u32 n = (c->baseclk + speed_hz - 1) / speed_hz; - if (n < 1) - n = 1; - else if (n > 0xff) - n = 0xff; + int n = DIV_ROUND_UP(c->baseclk, speed_hz) - 1; + n = clamp(n, SPI_MIN_DIVIDER, SPI_MAX_DIVIDER); /* enter config mode */ txx9spi_wr(c, mcr | TXx9_SPMCR_CONFIG | TXx9_SPMCR_BCLR, TXx9_SPMCR); @@ -370,8 +369,8 @@ static int __init txx9spi_probe(struct platform_device *dev) goto exit; } c->baseclk = clk_get_rate(c->clk); - c->min_speed_hz = (c->baseclk + 0xff - 1) / 0xff; - c->max_speed_hz = c->baseclk; + c->min_speed_hz = DIV_ROUND_UP(c->baseclk, SPI_MAX_DIVIDER + 1); + c->max_speed_hz = c->baseclk / (SPI_MIN_DIVIDER + 1); res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (!res) -- GitLab From 0fdd07f77fd9cc6a7d49076793daef06ea5d8f13 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 9 Aug 2009 11:42:32 +0200 Subject: [PATCH 1164/1165] VIDEO: Correct use of request_region/request_mem_region request_region should be used with release_region, not request_mem_region. Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c, the problem is actually the other way around; request_mem_region should be used instead of request_region. The semantic patch that finds/fixes this problem is as follows: (http://coccinelle.lip6.fr/) // @r1@ expression start; @@ request_region(start,...) @b1@ expression r1.start; @@ request_mem_region(start,...) @depends on !b1@ expression r1.start; expression E; @@ - release_mem_region + release_region (start,E) // Signed-off-by: Julia Lawall Signed-off-by: Ralf Baechle --- drivers/video/gbefb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c index 1a83709f961..f67db426837 100644 --- a/drivers/video/gbefb.c +++ b/drivers/video/gbefb.c @@ -1147,7 +1147,7 @@ static int __init gbefb_probe(struct platform_device *p_dev) gbefb_setup(options); #endif - if (!request_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) { + if (!request_mem_region(GBE_BASE, sizeof(struct sgi_gbe), "GBE")) { printk(KERN_ERR "gbefb: couldn't reserve mmio region\n"); ret = -EBUSY; goto out_release_framebuffer; -- GitLab From 22763c5cf3690a681551162c15d34d935308c8d7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 2 Dec 2009 19:51:21 -0800 Subject: [PATCH 1165/1165] Linux 2.6.32 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ad8260102f6..f5cdb72ba2c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 32 -EXTRAVERSION = -rc8 +EXTRAVERSION = NAME = Man-Eating Seals of Antiquity # *DOCUMENTATION* -- GitLab