From 9bf8a1a79d549a0cf3b26c88d1ac8cdf07deafee Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Mon, 23 Jun 2008 20:33:06 +0200
Subject: [PATCH 001/869] pci: debug extra pci resources range

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/pci/probe.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 3706ce7972d..27cdbb06c4d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -275,6 +275,7 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
 			}
 			res->start = l64 & PCI_BASE_ADDRESS_MEM_MASK;
 			res->end = res->start + sz64;
+			printk(KERN_INFO "PCI: %s reg %x 64bit mmio: [%llx, %llx]\n", pci_name(dev), reg, res->start, res->end);
 #else
 			if (sz64 > 0x100000000ULL) {
 				printk(KERN_ERR "PCI: Unable to handle 64-bit "
@@ -290,6 +291,8 @@ static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
 				res->end = sz;
 			}
 #endif
+		} else {
+			printk(KERN_INFO "PCI: %s reg %x %s: [%llx, %llx]\n", pci_name(dev), reg, (res->flags & IORESOURCE_IO)? "io port":"32bit mmio", res->start, res->end);
 		}
 	}
 	if (rom) {
@@ -357,6 +360,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 			res->start = base;
 		if (!res->end)
 			res->end = limit + 0xfff;
+		printk(KERN_INFO "PCI: bridge %s io port: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
 	}
 
 	res = child->resource[1];
@@ -368,6 +372,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM;
 		res->start = base;
 		res->end = limit + 0xfffff;
+		printk(KERN_INFO "PCI: bridge %s 32bit mmio: [%llx, %llx]\n", pci_name(dev), res->start, res->end);
 	}
 
 	res = child->resource[2];
@@ -402,6 +407,7 @@ void __devinit pci_read_bridge_bases(struct pci_bus *child)
 		res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM | IORESOURCE_PREFETCH;
 		res->start = base;
 		res->end = limit + 0xfffff;
+		printk(KERN_INFO "PCI: bridge %s %sbit mmio pref: [%llx, %llx]\n", pci_name(dev), (res->flags & PCI_PREF_RANGE_TYPE_64)?"64":"32",res->start, res->end);
 	}
 }
 
-- 
GitLab


From 76fbc263ff7e42ce8b21b8aee176e3c74b45f81a Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Mon, 23 Jun 2008 20:33:06 +0200
Subject: [PATCH 002/869] pci: debug extra pci bus resources

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/pci/setup-bus.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 8ddb918f5f5..c74a2bce083 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -537,6 +537,36 @@ void __ref pci_bus_assign_resources(struct pci_bus *bus)
 }
 EXPORT_SYMBOL(pci_bus_assign_resources);
 
+static void pci_bus_dump_res(struct pci_bus *bus)
+{
+        int i;
+
+        for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+                struct resource *res = bus->resource[i];
+                if (!res)
+                        continue;
+
+		printk(KERN_INFO "bus: %02x index %x %s: [%llx, %llx]\n", bus->number, i, (res->flags & IORESOURCE_IO)? "io port":"mmio", res->start, res->end);
+        }
+}
+
+static void pci_bus_dump_resources(struct pci_bus *bus)
+{
+	struct pci_bus *b;
+	struct pci_dev *dev;
+
+
+	pci_bus_dump_res(bus);
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		b = dev->subordinate;
+		if (!b)
+			continue;
+
+		pci_bus_dump_resources(b);
+	}
+}
+
 void __init
 pci_assign_unassigned_resources(void)
 {
@@ -552,4 +582,9 @@ pci_assign_unassigned_resources(void)
 		pci_bus_assign_resources(bus);
 		pci_enable_bridges(bus);
 	}
+
+	/* dump the resource on buses */
+	list_for_each_entry(bus, &pci_root_buses, node) {
+		pci_bus_dump_resources(bus);
+	}
 }
-- 
GitLab


From a83fe32fa668c0a17b3f99a1480b006f7d649924 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Fri, 18 Jul 2008 13:22:36 -0700
Subject: [PATCH 003/869] x86, pci: detect end_bus_number according to
 acpi/e820 reserved, v2

Jack Howarth reported that 2.6.26-rc9-git9 doesn't boot on MacBookPro2.

the reason is a faulty BIOS update that reportes faulty resources.

Nevertheless it's possible for Linux to be more resolent about this
situation (and similar situations) and work around this bug, by
cross-checking the mmconf range against the e820 table and ACPI resources.

Change the mconf bus range from [0,0xff] to to [0, 0x3f]
to match range [0xf0000000, 0xf4000000) in e820 tables.

[ v2, yhlu.kernel@gmail.com:
  x86, pci: detect end_bus_number according to acpi/e820 reserved - fix ]

Reported-by: Jack Howarth <howarth@bromo.msbb.uc.edu>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: jbarnes@virtuousgeek.org
Cc: Jack Howarth <howarth@bromo.msbb.uc.edu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/pci/mmconfig-shared.c | 65 +++++++++++++++++++++++++---------
 1 file changed, 48 insertions(+), 17 deletions(-)

diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 23faaa890ff..429c7014feb 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -293,7 +293,7 @@ static acpi_status __init find_mboard_resource(acpi_handle handle, u32 lvl,
 	return AE_OK;
 }
 
-static int __init is_acpi_reserved(unsigned long start, unsigned long end)
+static int __init is_acpi_reserved(u64 start, u64 end, unsigned not_used)
 {
 	struct resource mcfg_res;
 
@@ -310,6 +310,41 @@ static int __init is_acpi_reserved(unsigned long start, unsigned long end)
 	return mcfg_res.flags;
 }
 
+typedef int (*check_reserved_t)(u64 start, u64 end, unsigned type);
+
+static int __init is_mmconf_reserved(check_reserved_t is_reserved,
+		u64 addr, u64 size, int i,
+		typeof(pci_mmcfg_config[0]) *cfg, int with_e820)
+{
+	u64 old_size = size;
+	int valid = 0;
+
+	while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+		size >>= 1;
+		if (size < (16UL<<20))
+			break;
+	}
+
+	if (size >= (16UL<<20) || size == old_size) {
+		printk(KERN_NOTICE
+		       "PCI: MCFG area at %Lx reserved in %s\n",
+			addr, with_e820?"E820":"ACPI motherboard resources");
+		valid = 1;
+
+		if (old_size != size) {
+			/* update end_bus_number */
+			cfg->end_bus_number = cfg->start_bus_number + ((size>>20) - 1);
+			printk(KERN_NOTICE "PCI: updated MCFG configuration %d: base %lx "
+			       "segment %hu buses %u - %u\n",
+			       i, (unsigned long)cfg->address, cfg->pci_segment,
+			       (unsigned int)cfg->start_bus_number,
+			       (unsigned int)cfg->end_bus_number);
+		}
+	}
+
+	return valid;
+}
+
 static void __init pci_mmcfg_reject_broken(int early)
 {
 	typeof(pci_mmcfg_config[0]) *cfg;
@@ -324,21 +359,22 @@ static void __init pci_mmcfg_reject_broken(int early)
 
 	for (i = 0; i < pci_mmcfg_config_num; i++) {
 		int valid = 0;
-		u32 size = (cfg->end_bus_number + 1) << 20;
+		u64 addr, size;
+
 		cfg = &pci_mmcfg_config[i];
+		addr = cfg->start_bus_number;
+		addr <<= 20;
+		addr += cfg->address;
+		size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+		size <<= 20;
 		printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx "
 		       "segment %hu buses %u - %u\n",
 		       i, (unsigned long)cfg->address, cfg->pci_segment,
 		       (unsigned int)cfg->start_bus_number,
 		       (unsigned int)cfg->end_bus_number);
 
-		if (!early &&
-		    is_acpi_reserved(cfg->address, cfg->address + size - 1)) {
-			printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved "
-			       "in ACPI motherboard resources\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (!early)
+			valid = is_mmconf_reserved(is_acpi_reserved, addr, size, i, cfg, 0);
 
 		if (valid)
 			continue;
@@ -347,16 +383,11 @@ static void __init pci_mmcfg_reject_broken(int early)
 			printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not"
 			       " reserved in ACPI motherboard resources\n",
 			       cfg->address);
+
 		/* Don't try to do this check unless configuration
 		   type 1 is available. how about type 2 ?*/
-		if (raw_pci_ops && e820_all_mapped(cfg->address,
-						  cfg->address + size - 1,
-						  E820_RESERVED)) {
-			printk(KERN_NOTICE
-			       "PCI: MCFG area at %Lx reserved in E820\n",
-			       cfg->address);
-			valid = 1;
-		}
+		if (raw_pci_ops)
+			valid = is_mmconf_reserved(e820_all_mapped, addr, size, i, cfg, 1);
 
 		if (!valid)
 			goto reject;
-- 
GitLab


From bf068ee266f9dbaa6dacb8433a366bb399e7ae5b Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Tue, 19 Aug 2008 22:16:43 -0400
Subject: [PATCH 004/869] ext4: Handle unwritten extent properly with delayed
 allocation

When using fallocate the buffer_heads are marked unwritten and unmapped.
We need to map them in the writepages after a get_block.  Otherwise we
split the uninit extents, but never write the content to disk.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 59fbbe899ac..a1c7d762321 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1741,6 +1741,13 @@ static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical,
 				if (buffer_delay(bh)) {
 					bh->b_blocknr = pblock;
 					clear_buffer_delay(bh);
+					bh->b_bdev = inode->i_sb->s_bdev;
+				} else if (buffer_unwritten(bh)) {
+					bh->b_blocknr = pblock;
+					clear_buffer_unwritten(bh);
+					set_buffer_mapped(bh);
+					set_buffer_new(bh);
+					bh->b_bdev = inode->i_sb->s_bdev;
 				} else if (buffer_mapped(bh))
 					BUG_ON(bh->b_blocknr != pblock);
 
@@ -1814,7 +1821,7 @@ static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 		 * If blocks are delayed marked, we need to
 		 * put actual blocknr and drop delayed bit
 		 */
-		if (buffer_delay(lbh))
+		if (buffer_delay(lbh) || buffer_unwritten(lbh))
 			mpage_put_bnr_to_bhs(mpd, next, &new);
 
 		/* go for the remaining blocks */
@@ -1823,7 +1830,8 @@ static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 	}
 }
 
-#define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | (1 << BH_Delay))
+#define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | \
+		(1 << BH_Delay) | (1 << BH_Unwritten))
 
 /*
  * mpage_add_bh_to_extent - try to add one more block to extent of blocks
-- 
GitLab


From b4df2030858bde986cb6ff2e4b45945f84649e32 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Wed, 13 Aug 2008 21:44:34 -0400
Subject: [PATCH 005/869] ext4: Fix potential truncate BUG due to
 i_prealloc_list being non-empty

We need to call ext4_discard_reservation() earlier in ext4_truncate(),
to avoid a BUG() in ext4_mb_return_to_preallocation(), which is called
(ultimately) by ext4_free_blocks().  So we must ditch the blocks on
i_prealloc_list before we start freeing the data blocks.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index a1c7d762321..2d54c822c4c 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -3494,6 +3494,9 @@ void ext4_truncate(struct inode *inode)
 	 * modify the block allocation tree.
 	 */
 	down_write(&ei->i_data_sem);
+
+	ext4_discard_reservation(inode);
+
 	/*
 	 * The orphan list entry will now protect us from any crash which
 	 * occurs before the truncate completes, so it is now safe to propagate
@@ -3563,8 +3566,6 @@ do_indirects:
 		;
 	}
 
-	ext4_discard_reservation(inode);
-
 	up_write(&ei->i_data_sem);
 	inode->i_mtime = inode->i_ctime = ext4_current_time(inode);
 	ext4_mark_inode_dirty(handle, inode);
-- 
GitLab


From cd21322616c3af265d39bf15321d436e667a5dd1 Mon Sep 17 00:00:00 2001
From: Mingming Cao <cmm@us.ibm.com>
Date: Tue, 19 Aug 2008 22:16:59 -0400
Subject: [PATCH 006/869] ext4: Fix delalloc release block reservation for
 truncate

Ext4 will release the reserved blocks for delayed allocations when
inode is truncated/unlinked.  If there is no reserved block at all, we
shouldn't need to do so.  But current code still tries to release the
reserved blocks regardless whether the counters's value is 0.
Continue to do that causes the later calculation to go wrong and a
kernel BUG_ON() caught that. This doesn't happen for extent-based
files, as the calculation for 0 reserved blocks was right for extent
based file.

This patch fixed the kernel BUG() due to above reason.  It adds checks
for 0 to avoid unnecessary release and fix calculation for non-extent
files.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 2d54c822c4c..5e17d5f22a7 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1005,6 +1005,9 @@ static int ext4_indirect_calc_metadata_amount(struct inode *inode, int blocks)
  */
 static int ext4_calc_metadata_amount(struct inode *inode, int blocks)
 {
+	if (!blocks)
+		return 0;
+
 	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
 		return ext4_ext_calc_metadata_amount(inode, blocks);
 
@@ -1559,7 +1562,25 @@ static void ext4_da_release_space(struct inode *inode, int to_free)
 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
 	int total, mdb, mdb_free, release;
 
+	if (!to_free)
+		return;		/* Nothing to release, exit */
+
 	spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
+
+	if (!EXT4_I(inode)->i_reserved_data_blocks) {
+		/*
+		 * if there is no reserved blocks, but we try to free some
+		 * then the counter is messed up somewhere.
+		 * but since this function is called from invalidate
+		 * page, it's harmless to return without any action
+		 */
+		printk(KERN_INFO "ext4 delalloc try to release %d reserved "
+			    "blocks for inode %lu, but there is no reserved "
+			    "data blocks\n", to_free, inode->i_ino);
+		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+		return;
+	}
+
 	/* recalculate the number of metablocks still need to be reserved */
 	total = EXT4_I(inode)->i_reserved_data_blocks - to_free;
 	mdb = ext4_calc_metadata_amount(inode, total);
-- 
GitLab


From d015641734cde55d2fce48a6db3983c8a029fe05 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Tue, 19 Aug 2008 21:57:43 -0400
Subject: [PATCH 007/869] ext4: Fix ext4_dx_readdir hash collision handling

This fixes a bug where readdir() would return a directory entry twice
if there was a hash collision in an hash tree indexed directory.

Signed-off-by: Eugene Dashevsky <eugene@ibrix.com>
Signed-off-by: Mike Snitzer <msnitzer@ibrix.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/dir.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c
index d3d23d73c08..ec8e33b4521 100644
--- a/fs/ext4/dir.c
+++ b/fs/ext4/dir.c
@@ -411,7 +411,7 @@ static int call_filldir(struct file * filp, void * dirent,
 				get_dtype(sb, fname->file_type));
 		if (error) {
 			filp->f_pos = curr_pos;
-			info->extra_fname = fname->next;
+			info->extra_fname = fname;
 			return error;
 		}
 		fname = fname->next;
@@ -450,11 +450,21 @@ static int ext4_dx_readdir(struct file * filp,
 	 * If there are any leftover names on the hash collision
 	 * chain, return them first.
 	 */
-	if (info->extra_fname &&
-	    call_filldir(filp, dirent, filldir, info->extra_fname))
-		goto finished;
+	if (info->extra_fname) {
+		if (call_filldir(filp, dirent, filldir, info->extra_fname))
+			goto finished;
 
-	if (!info->curr_node)
+		info->extra_fname = NULL;
+		info->curr_node = rb_next(info->curr_node);
+		if (!info->curr_node) {
+			if (info->next_hash == ~0) {
+				filp->f_pos = EXT4_HTREE_EOF;
+				goto finished;
+			}
+			info->curr_hash = info->next_hash;
+			info->curr_minor_hash = 0;
+		}
+	} else if (!info->curr_node)
 		info->curr_node = rb_first(&info->root);
 
 	while (1) {
-- 
GitLab


From 88aa3cff4e9a38b953de9fbc54c96e619a2bb9f9 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Sat, 16 Aug 2008 07:57:35 -0400
Subject: [PATCH 008/869] ext4: Use ext4_discard_reservations instead of
 mballoc-specific call

In ext4_ext_truncate(), we should use the more generic
ext4_discard_reservations() call so we do the right thing when the
filesystem is mounted with the nomballoc option.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
---
 fs/ext4/extents.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 612c3d2c382..7212947a8ca 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2819,7 +2819,7 @@ void ext4_ext_truncate(struct inode *inode)
 	down_write(&EXT4_I(inode)->i_data_sem);
 	ext4_ext_invalidate_cache(inode);
 
-	ext4_mb_discard_inode_preallocations(inode);
+	ext4_discard_reservation(inode);
 
 	/*
 	 * TODO: optimization is possible here.
-- 
GitLab


From 37609fd5ae62db75026d9f53096a1fbc35e040d9 Mon Sep 17 00:00:00 2001
From: Josef Bacik <jbacik@redhat.com>
Date: Tue, 19 Aug 2008 22:13:41 -0400
Subject: [PATCH 009/869] ext4: don't try to resize if there are no reserved
 gdt blocks left

When trying to resize an ext4 fs and you run out of reserved gdt blocks,
you get an error that doesn't actually tell you what went wrong, it just
says that the gdb it picked is not correct, which is the case since you
don't have any reserved gdt blocks left.  This patch adds a check to make
sure you have reserved gdt blocks to use, and if not prints out a more
relevant error.

Signed-off-by: Josef Bacik <jbacik@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Cc: Andreas Dilger <adilger@sun.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/resize.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 0a926516426..b3d35604ea1 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -773,7 +773,8 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input)
 
 	if (reserved_gdb || gdb_off == 0) {
 		if (!EXT4_HAS_COMPAT_FEATURE(sb,
-					     EXT4_FEATURE_COMPAT_RESIZE_INODE)){
+					     EXT4_FEATURE_COMPAT_RESIZE_INODE)
+		    || !le16_to_cpu(es->s_reserved_gdt_blocks)) {
 			ext4_warning(sb, __func__,
 				     "No reserved GDT blocks, can't resize");
 			return -EPERM;
-- 
GitLab


From c001077f4003fa75793bb62979baa6241dd8eb19 Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@redhat.com>
Date: Tue, 19 Aug 2008 22:19:50 -0400
Subject: [PATCH 010/869] ext4: Fix bug where we return ENOSPC even though we
 have plenty of inodes

The find_group_flex() function starts with best_flex as the
parent_fbg_group, which happens to have 0 inodes free.  Some of the
flex groups searched have free blocks and free inodes, but the
flex_freeb_ratio is < 10, so they're skipped.  Then when a group is
compared to the current "best" flex group, it does not have more free
blocks than "best", so it is skipped as well.

This continues until no flex group with free inodes is found which has
a proper ratio or which has more free blocks than the "best" group,
and we're left with a "best" group that has 0 inodes free, and we
return -ENOSPC.

We fix this by changing the logic so that if the current "best" flex
group has no inodes free, and the current one does have room, it is
promoted to the next "best."

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/ialloc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index 655e760212b..f344834bbf5 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -351,7 +351,7 @@ find_close_to_parent:
 			goto found_flexbg;
 		}
 
-		if (best_flex < 0 ||
+		if (flex_group[best_flex].free_inodes == 0 ||
 		    (flex_group[i].free_blocks >
 		     flex_group[best_flex].free_blocks &&
 		     flex_group[i].free_inodes))
-- 
GitLab


From a02908f19c819aeec5e3dcf238adaa6deddd70b0 Mon Sep 17 00:00:00 2001
From: Mingming Cao <cmm@us.ibm.com>
Date: Tue, 19 Aug 2008 22:16:07 -0400
Subject: [PATCH 011/869] ext4: journal credits calulation cleanup and fix for
 non-extent writepage

When considering how many journal credits are needed for modifying a
chunk of data, we need to account for the super block, inode block,
quota blocks and xattr block, indirect/index blocks, also, group bitmap
and group descriptor blocks for new allocation (including data and
indirect/index blocks). There are many places in ext4 do the calculation
on their own and often missed one or two meta blocks, and often they
assume single block allocation, and did not considering the multile
chunk of allocation case.

This patch is trying to cleanup current journal credit code, provides
some common helper funtion to calculate the journal credits, to be used
for writepage, writepages, DIO, fallocate, migration, defrag, and for
both nonextent and extent files.

This patch modified the writepage/write_begin credit caculation for
nonextent files, to use the new helper function. It also fixed the
problem that writepage on nonextent files did not consider the case
blocksize <pagesize, thus could possibelly need multiple block
allocation in a single transaction.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/ext4.h      |   3 +
 fs/ext4/ext4_jbd2.h |   8 +++
 fs/ext4/inode.c     | 131 ++++++++++++++++++++++++++++++++------------
 3 files changed, 108 insertions(+), 34 deletions(-)

diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 6c7924d9e35..38e661b0ea8 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1072,6 +1072,7 @@ extern void ext4_set_inode_flags(struct inode *);
 extern void ext4_get_inode_flags(struct ext4_inode_info *);
 extern void ext4_set_aops(struct inode *inode);
 extern int ext4_writepage_trans_blocks(struct inode *);
+extern int ext4_meta_trans_blocks(struct inode *, int nrblocks, int idxblocks);
 extern int ext4_block_truncate_page(handle_t *handle,
 		struct address_space *mapping, loff_t from);
 extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct page *page);
@@ -1227,6 +1228,8 @@ extern const struct inode_operations ext4_fast_symlink_inode_operations;
 /* extents.c */
 extern int ext4_ext_tree_init(handle_t *handle, struct inode *);
 extern int ext4_ext_writepage_trans_blocks(struct inode *, int);
+extern int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks,
+				       int chunk);
 extern int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
 			ext4_lblk_t iblock,
 			unsigned long max_blocks, struct buffer_head *bh_result,
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index eb8bc3afe6e..b455c685a98 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -51,6 +51,14 @@
 					 EXT4_XATTR_TRANS_BLOCKS - 2 + \
 					 2*EXT4_QUOTA_TRANS_BLOCKS(sb))
 
+/*
+ * Define the number of metadata blocks we need to account to modify data.
+ *
+ * This include super block, inode block, quota blocks and xattr blocks
+ */
+#define EXT4_META_TRANS_BLOCKS(sb)	(EXT4_XATTR_TRANS_BLOCKS + \
+					2*EXT4_QUOTA_TRANS_BLOCKS(sb))
+
 /* Delete operations potentially hit one directory's namespace plus an
  * entire inode, plus arbitrary amounts of bitmap/indirection data.  Be
  * generous.  We can grow the delete transaction later if necessary. */
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 5e17d5f22a7..a2712906514 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -4354,56 +4354,119 @@ int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry,
 	return 0;
 }
 
+static int ext4_indirect_trans_blocks(struct inode *inode, int nrblocks,
+				      int chunk)
+{
+	int indirects;
+
+	/* if nrblocks are contiguous */
+	if (chunk) {
+		/*
+		 * With N contiguous data blocks, it need at most
+		 * N/EXT4_ADDR_PER_BLOCK(inode->i_sb) indirect blocks
+		 * 2 dindirect blocks
+		 * 1 tindirect block
+		 */
+		indirects = nrblocks / EXT4_ADDR_PER_BLOCK(inode->i_sb);
+		return indirects + 3;
+	}
+	/*
+	 * if nrblocks are not contiguous, worse case, each block touch
+	 * a indirect block, and each indirect block touch a double indirect
+	 * block, plus a triple indirect block
+	 */
+	indirects = nrblocks * 2 + 1;
+	return indirects;
+}
+
+static int ext4_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+	if (!(EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL))
+		return ext4_indirect_trans_blocks(inode, nrblocks, 0);
+	return ext4_ext_index_trans_blocks(inode, nrblocks, 0);
+}
 /*
- * How many blocks doth make a writepage()?
+ * Account for index blocks, block groups bitmaps and block group
+ * descriptor blocks if modify datablocks and index blocks
+ * worse case, the indexs blocks spread over different block groups
  *
- * With N blocks per page, it may be:
- * N data blocks
- * 2 indirect block
- * 2 dindirect
- * 1 tindirect
- * N+5 bitmap blocks (from the above)
- * N+5 group descriptor summary blocks
- * 1 inode block
- * 1 superblock.
- * 2 * EXT4_SINGLEDATA_TRANS_BLOCKS for the quote files
+ * If datablocks are discontiguous, they are possible to spread over
+ * different block groups too. If they are contiugous, with flexbg,
+ * they could still across block group boundary.
  *
- * 3 * (N + 5) + 2 + 2 * EXT4_SINGLEDATA_TRANS_BLOCKS
+ * Also account for superblock, inode, quota and xattr blocks
+ */
+int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
+{
+	int groups, gdpblocks;
+	int idxblocks;
+	int ret = 0;
+
+	/*
+	 * How many index blocks need to touch to modify nrblocks?
+	 * The "Chunk" flag indicating whether the nrblocks is
+	 * physically contiguous on disk
+	 *
+	 * For Direct IO and fallocate, they calls get_block to allocate
+	 * one single extent at a time, so they could set the "Chunk" flag
+	 */
+	idxblocks = ext4_index_trans_blocks(inode, nrblocks, chunk);
+
+	ret = idxblocks;
+
+	/*
+	 * Now let's see how many group bitmaps and group descriptors need
+	 * to account
+	 */
+	groups = idxblocks;
+	if (chunk)
+		groups += 1;
+	else
+		groups += nrblocks;
+
+	gdpblocks = groups;
+	if (groups > EXT4_SB(inode->i_sb)->s_groups_count)
+		groups = EXT4_SB(inode->i_sb)->s_groups_count;
+	if (groups > EXT4_SB(inode->i_sb)->s_gdb_count)
+		gdpblocks = EXT4_SB(inode->i_sb)->s_gdb_count;
+
+	/* bitmaps and block group descriptor blocks */
+	ret += groups + gdpblocks;
+
+	/* Blocks for super block, inode, quota and xattr blocks */
+	ret += EXT4_META_TRANS_BLOCKS(inode->i_sb);
+
+	return ret;
+}
+
+/*
+ * Calulate the total number of credits to reserve to fit
+ * the modification of a single pages into a single transaction
  *
- * With ordered or writeback data it's the same, less the N data blocks.
+ * This could be called via ext4_write_begin() or later
+ * ext4_da_writepages() in delalyed allocation case.
  *
- * If the inode's direct blocks can hold an integral number of pages then a
- * page cannot straddle two indirect blocks, and we can only touch one indirect
- * and dindirect block, and the "5" above becomes "3".
+ * In both case it's possible that we could allocating multiple
+ * chunks of blocks. We need to consider the worse case, when
+ * one new block per extent.
  *
- * This still overestimates under most circumstances.  If we were to pass the
- * start and end offsets in here as well we could do block_to_path() on each
- * block and work out the exact number of indirects which are touched.  Pah.
+ * For Direct IO and fallocate, the journal credits reservation
+ * is based on one single extent allocation, so they could use
+ * EXT4_DATA_TRANS_BLOCKS to get the needed credit to log a single
+ * chunk of allocation needs.
  */
-
 int ext4_writepage_trans_blocks(struct inode *inode)
 {
 	int bpp = ext4_journal_blocks_per_page(inode);
-	int indirects = (EXT4_NDIR_BLOCKS % bpp) ? 5 : 3;
 	int ret;
 
-	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
-		return ext4_ext_writepage_trans_blocks(inode, bpp);
+	ret = ext4_meta_trans_blocks(inode, bpp, 0);
 
+	/* Account for data blocks for journalled mode */
 	if (ext4_should_journal_data(inode))
-		ret = 3 * (bpp + indirects) + 2;
-	else
-		ret = 2 * (bpp + indirects) + 2;
-
-#ifdef CONFIG_QUOTA
-	/* We know that structure was already allocated during DQUOT_INIT so
-	 * we will be updating only the data blocks + inodes */
-	ret += 2*EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
-
+		ret += bpp;
 	return ret;
 }
-
 /*
  * The caller must have previously called ext4_reserve_inode_write().
  * Give this, we know that the caller already has write access to iloc->bh.
-- 
GitLab


From ee12b630687d510f6f4b6d4acdc4e267fd4adeda Mon Sep 17 00:00:00 2001
From: Mingming Cao <cmm@us.ibm.com>
Date: Tue, 19 Aug 2008 22:16:05 -0400
Subject: [PATCH 012/869] ext4: journal credits reservation fixes for extent
 file writepage

This patch modified the writepage/write_begin credit calculation for
extent files, to use the credits caculation helper function.

The current calculation of how many index/leaf blocks should be
accounted is too conservetive, it always considered the worse case,
where the tree level is 5, and in the case of multiple chunk
allocations, it always assumed no blocks were dirtied in common across
the allocations. This path uses the accurate depth of the inode with
some extras to calculate the index blocks, and also less conservative in
the case of multiple allocation accounting.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/ext4_extents.h |   4 +-
 fs/ext4/extents.c      | 104 +++++++++++++++++------------------------
 fs/ext4/migrate.c      |   3 +-
 3 files changed, 49 insertions(+), 62 deletions(-)

diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index 6c166c0a54b..d33dc56d698 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -216,7 +216,9 @@ extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks);
 extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
 extern void ext4_ext_store_pblock(struct ext4_extent *, ext4_fsblk_t);
 extern int ext4_extent_tree_init(handle_t *, struct inode *);
-extern int ext4_ext_calc_credits_for_insert(struct inode *, struct ext4_ext_path *);
+extern int ext4_ext_calc_credits_for_single_extent(struct inode *inode,
+						   int num,
+						   struct ext4_ext_path *path);
 extern int ext4_ext_try_to_merge(struct inode *inode,
 				 struct ext4_ext_path *path,
 				 struct ext4_extent *);
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 7212947a8ca..5c5dd3a1d65 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1747,54 +1747,61 @@ static int ext4_ext_rm_idx(handle_t *handle, struct inode *inode,
 }
 
 /*
- * ext4_ext_calc_credits_for_insert:
- * This routine returns max. credits that the extent tree can consume.
- * It should be OK for low-performance paths like ->writepage()
- * To allow many writing processes to fit into a single transaction,
- * the caller should calculate credits under i_data_sem and
- * pass the actual path.
+ * ext4_ext_calc_credits_for_single_extent:
+ * This routine returns max. credits that needed to insert an extent
+ * to the extent tree.
+ * When pass the actual path, the caller should calculate credits
+ * under i_data_sem.
  */
-int ext4_ext_calc_credits_for_insert(struct inode *inode,
+int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int num,
 						struct ext4_ext_path *path)
 {
-	int depth, needed;
-
 	if (path) {
+		int depth = ext_depth(inode);
+		int ret;
+
 		/* probably there is space in leaf? */
-		depth = ext_depth(inode);
 		if (le16_to_cpu(path[depth].p_hdr->eh_entries)
-				< le16_to_cpu(path[depth].p_hdr->eh_max))
-			return 1;
-	}
+				< le16_to_cpu(path[depth].p_hdr->eh_max)) {
 
-	/*
-	 * given 32-bit logical block (4294967296 blocks), max. tree
-	 * can be 4 levels in depth -- 4 * 340^4 == 53453440000.
-	 * Let's also add one more level for imbalance.
-	 */
-	depth = 5;
-
-	/* allocation of new data block(s) */
-	needed = 2;
+			/*
+			 *  There are some space in the leaf tree, no
+			 *  need to account for leaf block credit
+			 *
+			 *  bitmaps and block group descriptor blocks
+			 *  and other metadat blocks still need to be
+			 *  accounted.
+			 */
+			/* 1 one bitmap, 1 block group descriptor */
+			ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
+		}
+	}
 
-	/*
-	 * tree can be full, so it would need to grow in depth:
-	 * we need one credit to modify old root, credits for
-	 * new root will be added in split accounting
-	 */
-	needed += 1;
+	return ext4_meta_trans_blocks(inode, num, 1);
+}
 
-	/*
-	 * Index split can happen, we would need:
-	 *    allocate intermediate indexes (bitmap + group)
-	 *  + change two blocks at each level, but root (already included)
-	 */
-	needed += (depth * 2) + (depth * 2);
+/*
+ * How many index/leaf blocks need to change/allocate to modify nrblocks?
+ *
+ * if nrblocks are fit in a single extent (chunk flag is 1), then
+ * in the worse case, each tree level index/leaf need to be changed
+ * if the tree split due to insert a new extent, then the old tree
+ * index/leaf need to be updated too
+ *
+ * If the nrblocks are discontiguous, they could cause
+ * the whole tree split more than once, but this is really rare.
+ */
+int ext4_ext_index_trans_blocks(struct inode *inode, int num, int chunk)
+{
+	int index;
+	int depth = ext_depth(inode);
 
-	/* any allocation modifies superblock */
-	needed += 1;
+	if (chunk)
+		index = depth * 2;
+	else
+		index = depth * 3;
 
-	return needed;
+	return index;
 }
 
 static int ext4_remove_blocks(handle_t *handle, struct inode *inode,
@@ -1921,9 +1928,7 @@ ext4_ext_rm_leaf(handle_t *handle, struct inode *inode,
 			correct_index = 1;
 			credits += (ext_depth(inode)) + 1;
 		}
-#ifdef CONFIG_QUOTA
 		credits += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
 
 		err = ext4_ext_journal_restart(handle, credits);
 		if (err)
@@ -2858,27 +2863,6 @@ out_stop:
 	ext4_journal_stop(handle);
 }
 
-/*
- * ext4_ext_writepage_trans_blocks:
- * calculate max number of blocks we could modify
- * in order to allocate new block for an inode
- */
-int ext4_ext_writepage_trans_blocks(struct inode *inode, int num)
-{
-	int needed;
-
-	needed = ext4_ext_calc_credits_for_insert(inode, NULL);
-
-	/* caller wants to allocate num blocks, but note it includes sb */
-	needed = needed * num - (num - 1);
-
-#ifdef CONFIG_QUOTA
-	needed += 2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb);
-#endif
-
-	return needed;
-}
-
 static void ext4_falloc_update_inode(struct inode *inode,
 				int mode, loff_t new_size, int update_ctime)
 {
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index b9e077ba07e..46fc0b5b12b 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -53,7 +53,8 @@ static int finish_range(handle_t *handle, struct inode *inode,
 	 * credit. But below we try to not accumalate too much
 	 * of them by restarting the journal.
 	 */
-	needed = ext4_ext_calc_credits_for_insert(inode, path);
+	needed = ext4_ext_calc_credits_for_single_extent(inode,
+		    lb->last_block - lb->first_block + 1, path);
 
 	/*
 	 * Make sure the credit we accumalated is not really high
-- 
GitLab


From f3bd1f3fa8ca7ec70cfd87aa94dc5e1a260901f2 Mon Sep 17 00:00:00 2001
From: Mingming Cao <cmm@us.ibm.com>
Date: Tue, 19 Aug 2008 22:16:03 -0400
Subject: [PATCH 013/869] ext4: journal credits reservation fixes for DIO,
 fallocate

DIO and fallocate credit calculation is different than writepage, as
they do start a new journal right for each call to ext4_get_blocks_wrap().
This patch uses the helper function in DIO and fallocate case, passing
a flag indicating that the modified data are contigous thus could account
less indirect/index blocks.

This patch also fixed the journal credit reservation for direct I/O
(DIO).  Previously the estimated credits for DIO only was calculated for
non-extent files, which was not enough if the file is extent-based.

Also fixed was fallocate double-counting credits for modifying the the
superblock.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/ext4.h    |  1 +
 fs/ext4/extents.c | 11 +++++------
 fs/ext4/inode.c   | 45 ++++++++++++++++++++++++---------------------
 3 files changed, 30 insertions(+), 27 deletions(-)

diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index 38e661b0ea8..295003241d3 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -1073,6 +1073,7 @@ extern void ext4_get_inode_flags(struct ext4_inode_info *);
 extern void ext4_set_aops(struct inode *inode);
 extern int ext4_writepage_trans_blocks(struct inode *);
 extern int ext4_meta_trans_blocks(struct inode *, int nrblocks, int idxblocks);
+extern int ext4_chunk_trans_blocks(struct inode *, int nrblocks);
 extern int ext4_block_truncate_page(handle_t *handle,
 		struct address_space *mapping, loff_t from);
 extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct page *page);
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 5c5dd3a1d65..5596b70efa2 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1758,7 +1758,7 @@ int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int num,
 {
 	if (path) {
 		int depth = ext_depth(inode);
-		int ret;
+		int ret = 0;
 
 		/* probably there is space in leaf? */
 		if (le16_to_cpu(path[depth].p_hdr->eh_entries)
@@ -1777,7 +1777,7 @@ int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int num,
 		}
 	}
 
-	return ext4_meta_trans_blocks(inode, num, 1);
+	return ext4_chunk_trans_blocks(inode, num);
 }
 
 /*
@@ -2810,7 +2810,7 @@ void ext4_ext_truncate(struct inode *inode)
 	/*
 	 * probably first extent we're gonna free will be last in block
 	 */
-	err = ext4_writepage_trans_blocks(inode) + 3;
+	err = ext4_writepage_trans_blocks(inode);
 	handle = ext4_journal_start(inode, err);
 	if (IS_ERR(handle))
 		return;
@@ -2923,10 +2923,9 @@ long ext4_fallocate(struct inode *inode, int mode, loff_t offset, loff_t len)
 	max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
 							- block;
 	/*
-	 * credits to insert 1 extent into extent tree + buffers to be able to
-	 * modify 1 super block, 1 block bitmap and 1 group descriptor.
+	 * credits to insert 1 extent into extent tree
 	 */
-	credits = EXT4_DATA_TRANS_BLOCKS(inode->i_sb) + 3;
+	credits = ext4_chunk_trans_blocks(inode, max_blocks);
 	mutex_lock(&inode->i_mutex);
 retry:
 	while (ret >= 0 && ret < max_blocks) {
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index a2712906514..ffc95ba4885 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1044,18 +1044,6 @@ static void ext4_da_update_reserve_space(struct inode *inode, int used)
 	spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
 }
 
-/* Maximum number of blocks we map for direct IO at once. */
-#define DIO_MAX_BLOCKS 4096
-/*
- * Number of credits we need for writing DIO_MAX_BLOCKS:
- * We need sb + group descriptor + bitmap + inode -> 4
- * For B blocks with A block pointers per block we need:
- * 1 (triple ind.) + (B/A/A + 2) (doubly ind.) + (B/A + 2) (indirect).
- * If we plug in 4096 for B and 256 for A (for 1KB block size), we get 25.
- */
-#define DIO_CREDITS 25
-
-
 /*
  * The ext4_get_blocks_wrap() function try to look up the requested blocks,
  * and returns if the blocks are already mapped.
@@ -1167,19 +1155,23 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
 	return retval;
 }
 
+/* Maximum number of blocks we map for direct IO at once. */
+#define DIO_MAX_BLOCKS 4096
+
 static int ext4_get_block(struct inode *inode, sector_t iblock,
 			struct buffer_head *bh_result, int create)
 {
 	handle_t *handle = ext4_journal_current_handle();
 	int ret = 0, started = 0;
 	unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
+	int dio_credits;
 
 	if (create && !handle) {
 		/* Direct IO write... */
 		if (max_blocks > DIO_MAX_BLOCKS)
 			max_blocks = DIO_MAX_BLOCKS;
-		handle = ext4_journal_start(inode, DIO_CREDITS +
-			      2 * EXT4_QUOTA_TRANS_BLOCKS(inode->i_sb));
+		dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
+		handle = ext4_journal_start(inode, dio_credits);
 		if (IS_ERR(handle)) {
 			ret = PTR_ERR(handle);
 			goto out;
@@ -2243,7 +2235,7 @@ static int ext4_da_writepage(struct page *page,
  * for DIO, writepages, and truncate
  */
 #define EXT4_MAX_WRITEBACK_PAGES      DIO_MAX_BLOCKS
-#define EXT4_MAX_WRITEBACK_CREDITS    DIO_CREDITS
+#define EXT4_MAX_WRITEBACK_CREDITS    25
 
 static int ext4_da_writepages(struct address_space *mapping,
 				struct writeback_control *wbc)
@@ -4441,7 +4433,8 @@ int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
 
 /*
  * Calulate the total number of credits to reserve to fit
- * the modification of a single pages into a single transaction
+ * the modification of a single pages into a single transaction,
+ * which may include multiple chunks of block allocations.
  *
  * This could be called via ext4_write_begin() or later
  * ext4_da_writepages() in delalyed allocation case.
@@ -4449,11 +4442,6 @@ int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
  * In both case it's possible that we could allocating multiple
  * chunks of blocks. We need to consider the worse case, when
  * one new block per extent.
- *
- * For Direct IO and fallocate, the journal credits reservation
- * is based on one single extent allocation, so they could use
- * EXT4_DATA_TRANS_BLOCKS to get the needed credit to log a single
- * chunk of allocation needs.
  */
 int ext4_writepage_trans_blocks(struct inode *inode)
 {
@@ -4467,6 +4455,21 @@ int ext4_writepage_trans_blocks(struct inode *inode)
 		ret += bpp;
 	return ret;
 }
+
+/*
+ * Calculate the journal credits for a chunk of data modification.
+ *
+ * This is called from DIO, fallocate or whoever calling
+ * ext4_get_blocks_wrap() to map/allocate a chunk of contigous disk blocks.
+ *
+ * journal buffers for data blocks are not included here, as DIO
+ * and fallocate do no need to journal data buffers.
+ */
+int ext4_chunk_trans_blocks(struct inode *inode, int nrblocks)
+{
+	return ext4_meta_trans_blocks(inode, nrblocks, 1);
+}
+
 /*
  * The caller must have previously called ext4_reserve_inode_write().
  * Give this, we know that the caller already has write access to iloc->bh.
-- 
GitLab


From a1d6cc563bfdf1bf2829d3e6ce4d8b774251796b Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Tue, 19 Aug 2008 21:55:02 -0400
Subject: [PATCH 014/869] ext4: Rework the ext4_da_writepages() function

With the below changes we reserve credit needed to insert only one
extent resulting from a call to single get_block.  This makes sure we
don't take too much journal credits during writeout.  We also don't
limit the pages to write.  That means we loop through the dirty pages
building largest possible contiguous block request.  Then we issue a
single get_block request.  We may get less block that we requested.  If
so we would end up not mapping some of the buffer_heads.  That means
those buffer_heads are still marked delay.  Later in the writepage
callback via __mpage_writepage we redirty those pages.

We should also not limit/throttle wbc->nr_to_write in the filesystem
writepages callback. That cause wrong behaviour in
generic_sync_sb_inodes caused by wbc->nr_to_write being <= 0

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c | 201 +++++++++++++++++++++++++++---------------------
 1 file changed, 113 insertions(+), 88 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index ffc95ba4885..8dd22eade42 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -41,6 +41,8 @@
 #include "acl.h"
 #include "ext4_extents.h"
 
+#define MPAGE_DA_EXTENT_TAIL 0x01
+
 static inline int ext4_begin_ordered_truncate(struct inode *inode,
 					      loff_t new_size)
 {
@@ -1626,11 +1628,13 @@ struct mpage_da_data {
 	unsigned long first_page, next_page;	/* extent of pages */
 	get_block_t *get_block;
 	struct writeback_control *wbc;
+	int io_done;
+	long pages_written;
 };
 
 /*
  * mpage_da_submit_io - walks through extent of pages and try to write
- * them with __mpage_writepage()
+ * them with writepage() call back
  *
  * @mpd->inode: inode
  * @mpd->first_page: first page of the extent
@@ -1645,18 +1649,11 @@ struct mpage_da_data {
 static int mpage_da_submit_io(struct mpage_da_data *mpd)
 {
 	struct address_space *mapping = mpd->inode->i_mapping;
-	struct mpage_data mpd_pp = {
-		.bio = NULL,
-		.last_block_in_bio = 0,
-		.get_block = mpd->get_block,
-		.use_writepage = 1,
-	};
 	int ret = 0, err, nr_pages, i;
 	unsigned long index, end;
 	struct pagevec pvec;
 
 	BUG_ON(mpd->next_page <= mpd->first_page);
-
 	pagevec_init(&pvec, 0);
 	index = mpd->first_page;
 	end = mpd->next_page - 1;
@@ -1674,8 +1671,9 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd)
 				break;
 			index++;
 
-			err = __mpage_writepage(page, mpd->wbc, &mpd_pp);
-
+			err = mapping->a_ops->writepage(page, mpd->wbc);
+			if (!err)
+				mpd->pages_written++;
 			/*
 			 * In error case, we have to continue because
 			 * remaining pages are still locked
@@ -1686,9 +1684,6 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd)
 		}
 		pagevec_release(&pvec);
 	}
-	if (mpd_pp.bio)
-		mpage_bio_submit(WRITE, mpd_pp.bio);
-
 	return ret;
 }
 
@@ -1711,7 +1706,7 @@ static void mpage_put_bnr_to_bhs(struct mpage_da_data *mpd, sector_t logical,
 	int blocks = exbh->b_size >> inode->i_blkbits;
 	sector_t pblock = exbh->b_blocknr, cur_logical;
 	struct buffer_head *head, *bh;
-	unsigned long index, end;
+	pgoff_t index, end;
 	struct pagevec pvec;
 	int nr_pages, i;
 
@@ -1796,13 +1791,11 @@ static inline void __unmap_underlying_blocks(struct inode *inode,
  *
  * The function skips space we know is already mapped to disk blocks.
  *
- * The function ignores errors ->get_block() returns, thus real
- * error handling is postponed to __mpage_writepage()
  */
 static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 {
+	int err = 0;
 	struct buffer_head *lbh = &mpd->lbh;
-	int err = 0, remain = lbh->b_size;
 	sector_t next = lbh->b_blocknr;
 	struct buffer_head new;
 
@@ -1812,35 +1805,32 @@ static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 	if (buffer_mapped(lbh) && !buffer_delay(lbh))
 		return;
 
-	while (remain) {
-		new.b_state = lbh->b_state;
-		new.b_blocknr = 0;
-		new.b_size = remain;
-		err = mpd->get_block(mpd->inode, next, &new, 1);
-		if (err) {
-			/*
-			 * Rather than implement own error handling
-			 * here, we just leave remaining blocks
-			 * unallocated and try again with ->writepage()
-			 */
-			break;
-		}
-		BUG_ON(new.b_size == 0);
+	new.b_state = lbh->b_state;
+	new.b_blocknr = 0;
+	new.b_size = lbh->b_size;
 
-		if (buffer_new(&new))
-			__unmap_underlying_blocks(mpd->inode, &new);
+	/*
+	 * If we didn't accumulate anything
+	 * to write simply return
+	 */
+	if (!new.b_size)
+		return;
+	err = mpd->get_block(mpd->inode, next, &new, 1);
+	if (err)
+		return;
+	BUG_ON(new.b_size == 0);
 
-		/*
-		 * If blocks are delayed marked, we need to
-		 * put actual blocknr and drop delayed bit
-		 */
-		if (buffer_delay(lbh) || buffer_unwritten(lbh))
-			mpage_put_bnr_to_bhs(mpd, next, &new);
+	if (buffer_new(&new))
+		__unmap_underlying_blocks(mpd->inode, &new);
 
-		/* go for the remaining blocks */
-		next += new.b_size >> mpd->inode->i_blkbits;
-		remain -= new.b_size;
-	}
+	/*
+	 * If blocks are delayed marked, we need to
+	 * put actual blocknr and drop delayed bit
+	 */
+	if (buffer_delay(lbh) || buffer_unwritten(lbh))
+		mpage_put_bnr_to_bhs(mpd, next, &new);
+
+	return;
 }
 
 #define BH_FLAGS ((1 << BH_Uptodate) | (1 << BH_Mapped) | \
@@ -1886,13 +1876,9 @@ static void mpage_add_bh_to_extent(struct mpage_da_data *mpd,
 	 * need to flush current  extent and start new one
 	 */
 	mpage_da_map_blocks(mpd);
-
-	/*
-	 * Now start a new extent
-	 */
-	lbh->b_size = bh->b_size;
-	lbh->b_state = bh->b_state & BH_FLAGS;
-	lbh->b_blocknr = logical;
+	mpage_da_submit_io(mpd);
+	mpd->io_done = 1;
+	return;
 }
 
 /*
@@ -1912,17 +1898,35 @@ static int __mpage_da_writepage(struct page *page,
 	struct buffer_head *bh, *head, fake;
 	sector_t logical;
 
+	if (mpd->io_done) {
+		/*
+		 * Rest of the page in the page_vec
+		 * redirty then and skip then. We will
+		 * try to to write them again after
+		 * starting a new transaction
+		 */
+		redirty_page_for_writepage(wbc, page);
+		unlock_page(page);
+		return MPAGE_DA_EXTENT_TAIL;
+	}
 	/*
 	 * Can we merge this page to current extent?
 	 */
 	if (mpd->next_page != page->index) {
 		/*
 		 * Nope, we can't. So, we map non-allocated blocks
-		 * and start IO on them using __mpage_writepage()
+		 * and start IO on them using writepage()
 		 */
 		if (mpd->next_page != mpd->first_page) {
 			mpage_da_map_blocks(mpd);
 			mpage_da_submit_io(mpd);
+			/*
+			 * skip rest of the page in the page_vec
+			 */
+			mpd->io_done = 1;
+			redirty_page_for_writepage(wbc, page);
+			unlock_page(page);
+			return MPAGE_DA_EXTENT_TAIL;
 		}
 
 		/*
@@ -1953,6 +1957,8 @@ static int __mpage_da_writepage(struct page *page,
 		set_buffer_dirty(bh);
 		set_buffer_uptodate(bh);
 		mpage_add_bh_to_extent(mpd, logical, bh);
+		if (mpd->io_done)
+			return MPAGE_DA_EXTENT_TAIL;
 	} else {
 		/*
 		 * Page with regular buffer heads, just add all dirty ones
@@ -1961,8 +1967,12 @@ static int __mpage_da_writepage(struct page *page,
 		bh = head;
 		do {
 			BUG_ON(buffer_locked(bh));
-			if (buffer_dirty(bh))
+			if (buffer_dirty(bh) &&
+				(!buffer_mapped(bh) || buffer_delay(bh))) {
 				mpage_add_bh_to_extent(mpd, logical, bh);
+				if (mpd->io_done)
+					return MPAGE_DA_EXTENT_TAIL;
+			}
 			logical++;
 		} while ((bh = bh->b_this_page) != head);
 	}
@@ -1981,22 +1991,13 @@ static int __mpage_da_writepage(struct page *page,
  *
  * This is a library function, which implements the writepages()
  * address_space_operation.
- *
- * In order to avoid duplication of logic that deals with partial pages,
- * multiple bio per page, etc, we find non-allocated blocks, allocate
- * them with minimal calls to ->get_block() and re-use __mpage_writepage()
- *
- * It's important that we call __mpage_writepage() only once for each
- * involved page, otherwise we'd have to implement more complicated logic
- * to deal with pages w/o PG_lock or w/ PG_writeback and so on.
- *
- * See comments to mpage_writepages()
  */
 static int mpage_da_writepages(struct address_space *mapping,
 			       struct writeback_control *wbc,
 			       get_block_t get_block)
 {
 	struct mpage_da_data mpd;
+	long to_write;
 	int ret;
 
 	if (!get_block)
@@ -2010,17 +2011,22 @@ static int mpage_da_writepages(struct address_space *mapping,
 	mpd.first_page = 0;
 	mpd.next_page = 0;
 	mpd.get_block = get_block;
+	mpd.io_done = 0;
+	mpd.pages_written = 0;
+
+	to_write = wbc->nr_to_write;
 
 	ret = write_cache_pages(mapping, wbc, __mpage_da_writepage, &mpd);
 
 	/*
 	 * Handle last extent of pages
 	 */
-	if (mpd.next_page != mpd.first_page) {
+	if (!mpd.io_done && mpd.next_page != mpd.first_page) {
 		mpage_da_map_blocks(&mpd);
 		mpage_da_submit_io(&mpd);
 	}
 
+	wbc->nr_to_write = to_write - mpd.pages_written;
 	return ret;
 }
 
@@ -2238,7 +2244,7 @@ static int ext4_da_writepage(struct page *page,
 #define EXT4_MAX_WRITEBACK_CREDITS    25
 
 static int ext4_da_writepages(struct address_space *mapping,
-				struct writeback_control *wbc)
+			      struct writeback_control *wbc)
 {
 	struct inode *inode = mapping->host;
 	handle_t *handle = NULL;
@@ -2246,42 +2252,53 @@ static int ext4_da_writepages(struct address_space *mapping,
 	int ret = 0;
 	long to_write;
 	loff_t range_start = 0;
+	long pages_skipped = 0;
 
 	/*
 	 * No pages to write? This is mainly a kludge to avoid starting
 	 * a transaction for special inodes like journal inode on last iput()
 	 * because that could violate lock ordering on umount
 	 */
-	if (!mapping->nrpages)
+	if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
 		return 0;
 
-	/*
-	 * Estimate the worse case needed credits to write out
-	 * EXT4_MAX_BUF_BLOCKS pages
-	 */
-	needed_blocks = EXT4_MAX_WRITEBACK_CREDITS;
-
-	to_write = wbc->nr_to_write;
-	if (!wbc->range_cyclic) {
+	if (!wbc->range_cyclic)
 		/*
 		 * If range_cyclic is not set force range_cont
 		 * and save the old writeback_index
 		 */
 		wbc->range_cont = 1;
-		range_start =  wbc->range_start;
-	}
 
-	while (!ret && to_write) {
+	range_start =  wbc->range_start;
+	pages_skipped = wbc->pages_skipped;
+
+restart_loop:
+	to_write = wbc->nr_to_write;
+	while (!ret && to_write > 0) {
+
+		/*
+		 * we  insert one extent at a time. So we need
+		 * credit needed for single extent allocation.
+		 * journalled mode is currently not supported
+		 * by delalloc
+		 */
+		BUG_ON(ext4_should_journal_data(inode));
+		needed_blocks = EXT4_DATA_TRANS_BLOCKS(inode->i_sb);
+
 		/* start a new transaction*/
 		handle = ext4_journal_start(inode, needed_blocks);
 		if (IS_ERR(handle)) {
 			ret = PTR_ERR(handle);
+			printk(KERN_EMERG "%s: jbd2_start: "
+			       "%ld pages, ino %lu; err %d\n", __func__,
+				wbc->nr_to_write, inode->i_ino, ret);
+			dump_stack();
 			goto out_writepages;
 		}
 		if (ext4_should_order_data(inode)) {
 			/*
 			 * With ordered mode we need to add
-			 * the inode to the journal handle
+			 * the inode to the journal handl
 			 * when we do block allocation.
 			 */
 			ret = ext4_jbd2_file_inode(handle, inode);
@@ -2289,20 +2306,20 @@ static int ext4_da_writepages(struct address_space *mapping,
 				ext4_journal_stop(handle);
 				goto out_writepages;
 			}
-
 		}
-		/*
-		 * set the max dirty pages could be write at a time
-		 * to fit into the reserved transaction credits
-		 */
-		if (wbc->nr_to_write > EXT4_MAX_WRITEBACK_PAGES)
-			wbc->nr_to_write = EXT4_MAX_WRITEBACK_PAGES;
 
 		to_write -= wbc->nr_to_write;
 		ret = mpage_da_writepages(mapping, wbc,
-						ext4_da_get_block_write);
+					  ext4_da_get_block_write);
 		ext4_journal_stop(handle);
-		if (wbc->nr_to_write) {
+		if (ret == MPAGE_DA_EXTENT_TAIL) {
+			/*
+			 * got one extent now try with
+			 * rest of the pages
+			 */
+			to_write += wbc->nr_to_write;
+			ret = 0;
+		} else if (wbc->nr_to_write) {
 			/*
 			 * There is no more writeout needed
 			 * or we requested for a noblocking writeout
@@ -2314,10 +2331,18 @@ static int ext4_da_writepages(struct address_space *mapping,
 		wbc->nr_to_write = to_write;
 	}
 
+	if (wbc->range_cont && (pages_skipped != wbc->pages_skipped)) {
+		/* We skipped pages in this loop */
+		wbc->range_start = range_start;
+		wbc->nr_to_write = to_write +
+				wbc->pages_skipped - pages_skipped;
+		wbc->pages_skipped = pages_skipped;
+		goto restart_loop;
+	}
+
 out_writepages:
 	wbc->nr_to_write = to_write;
-	if (range_start)
-		wbc->range_start = range_start;
+	wbc->range_start = range_start;
 	return ret;
 }
 
-- 
GitLab


From 525f4ed8dcb72c71b306a78ecbf06f41d08fe441 Mon Sep 17 00:00:00 2001
From: Mingming Cao <cmm@us.ibm.com>
Date: Tue, 19 Aug 2008 22:15:58 -0400
Subject: [PATCH 015/869] ext4: journal credit fix for the delayed allocation's
 writepages() function

Previous delalloc writepages implementation started a new transaction
outside of a loop which called get_block() to do the block allocation.
Since we didn't know exactly how many blocks would need to be allocated,
the estimated journal credits required was very conservative and caused
many issues.

With the reworked delayed allocation, a new transaction is created for
each get_block(), thus we don't need to guess how many credits for the
multiple chunk of allocation.  We start every transaction with enough
credits for inserting a single exent.  When estimate the credits for
indirect blocks to allocate a chunk of blocks, we need to know the
number of data blocks to allocate.  We use the total number of reserved
delalloc datablocks; if that is too big, for non-extent files, we need
to limit the number of blocks to EXT4_MAX_TRANS_BLOCKS.

Code cleanup from Aneesh.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-off-by:  Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/extents.c |  8 ++---
 fs/ext4/inode.c   | 74 ++++++++++++++++++++++++++++++++++-------------
 2 files changed, 58 insertions(+), 24 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 5596b70efa2..b24d3c53f20 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1753,7 +1753,7 @@ static int ext4_ext_rm_idx(handle_t *handle, struct inode *inode,
  * When pass the actual path, the caller should calculate credits
  * under i_data_sem.
  */
-int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int num,
+int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int nrblocks,
 						struct ext4_ext_path *path)
 {
 	if (path) {
@@ -1772,12 +1772,12 @@ int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int num,
 			 *  and other metadat blocks still need to be
 			 *  accounted.
 			 */
-			/* 1 one bitmap, 1 block group descriptor */
+			/* 1 bitmap, 1 block group descriptor */
 			ret = 2 + EXT4_META_TRANS_BLOCKS(inode->i_sb);
 		}
 	}
 
-	return ext4_chunk_trans_blocks(inode, num);
+	return ext4_chunk_trans_blocks(inode, nrblocks);
 }
 
 /*
@@ -1791,7 +1791,7 @@ int ext4_ext_calc_credits_for_single_extent(struct inode *inode, int num,
  * If the nrblocks are discontiguous, they could cause
  * the whole tree split more than once, but this is really rare.
  */
-int ext4_ext_index_trans_blocks(struct inode *inode, int num, int chunk)
+int ext4_ext_index_trans_blocks(struct inode *inode, int nrblocks, int chunk)
 {
 	int index;
 	int depth = ext_depth(inode);
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 8dd22eade42..d1906d9a22d 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1848,29 +1848,53 @@ static void mpage_da_map_blocks(struct mpage_da_data *mpd)
 static void mpage_add_bh_to_extent(struct mpage_da_data *mpd,
 				   sector_t logical, struct buffer_head *bh)
 {
-	struct buffer_head *lbh = &mpd->lbh;
 	sector_t next;
+	size_t b_size = bh->b_size;
+	struct buffer_head *lbh = &mpd->lbh;
+	int nrblocks = lbh->b_size >> mpd->inode->i_blkbits;
 
-	next = lbh->b_blocknr + (lbh->b_size >> mpd->inode->i_blkbits);
-
+	/* check if thereserved journal credits might overflow */
+	if (!(EXT4_I(mpd->inode)->i_flags & EXT4_EXTENTS_FL)) {
+		if (nrblocks >= EXT4_MAX_TRANS_DATA) {
+			/*
+			 * With non-extent format we are limited by the journal
+			 * credit available.  Total credit needed to insert
+			 * nrblocks contiguous blocks is dependent on the
+			 * nrblocks.  So limit nrblocks.
+			 */
+			goto flush_it;
+		} else if ((nrblocks + (b_size >> mpd->inode->i_blkbits)) >
+				EXT4_MAX_TRANS_DATA) {
+			/*
+			 * Adding the new buffer_head would make it cross the
+			 * allowed limit for which we have journal credit
+			 * reserved. So limit the new bh->b_size
+			 */
+			b_size = (EXT4_MAX_TRANS_DATA - nrblocks) <<
+						mpd->inode->i_blkbits;
+			/* we will do mpage_da_submit_io in the next loop */
+		}
+	}
 	/*
 	 * First block in the extent
 	 */
 	if (lbh->b_size == 0) {
 		lbh->b_blocknr = logical;
-		lbh->b_size = bh->b_size;
+		lbh->b_size = b_size;
 		lbh->b_state = bh->b_state & BH_FLAGS;
 		return;
 	}
 
+	next = lbh->b_blocknr + nrblocks;
 	/*
 	 * Can we merge the block to our big extent?
 	 */
 	if (logical == next && (bh->b_state & BH_FLAGS) == lbh->b_state) {
-		lbh->b_size += bh->b_size;
+		lbh->b_size += b_size;
 		return;
 	}
 
+flush_it:
 	/*
 	 * We couldn't merge the block to our extent, so we
 	 * need to flush current  extent and start new one
@@ -2231,17 +2255,29 @@ static int ext4_da_writepage(struct page *page,
 }
 
 /*
- * For now just follow the DIO way to estimate the max credits
- * needed to write out EXT4_MAX_WRITEBACK_PAGES.
- * todo: need to calculate the max credits need for
- * extent based files, currently the DIO credits is based on
- * indirect-blocks mapping way.
- *
- * Probably should have a generic way to calculate credits
- * for DIO, writepages, and truncate
+ * This is called via ext4_da_writepages() to
+ * calulate the total number of credits to reserve to fit
+ * a single extent allocation into a single transaction,
+ * ext4_da_writpeages() will loop calling this before
+ * the block allocation.
  */
-#define EXT4_MAX_WRITEBACK_PAGES      DIO_MAX_BLOCKS
-#define EXT4_MAX_WRITEBACK_CREDITS    25
+
+static int ext4_da_writepages_trans_blocks(struct inode *inode)
+{
+	int max_blocks = EXT4_I(inode)->i_reserved_data_blocks;
+
+	/*
+	 * With non-extent format the journal credit needed to
+	 * insert nrblocks contiguous block is dependent on
+	 * number of contiguous block. So we will limit
+	 * number of contiguous block to a sane value
+	 */
+	if (!(inode->i_flags & EXT4_EXTENTS_FL) &&
+	    (max_blocks > EXT4_MAX_TRANS_DATA))
+		max_blocks = EXT4_MAX_TRANS_DATA;
+
+	return ext4_chunk_trans_blocks(inode, max_blocks);
+}
 
 static int ext4_da_writepages(struct address_space *mapping,
 			      struct writeback_control *wbc)
@@ -2283,7 +2319,7 @@ restart_loop:
 		 * by delalloc
 		 */
 		BUG_ON(ext4_should_journal_data(inode));
-		needed_blocks = EXT4_DATA_TRANS_BLOCKS(inode->i_sb);
+		needed_blocks = ext4_da_writepages_trans_blocks(inode);
 
 		/* start a new transaction*/
 		handle = ext4_journal_start(inode, needed_blocks);
@@ -4461,11 +4497,9 @@ int ext4_meta_trans_blocks(struct inode *inode, int nrblocks, int chunk)
  * the modification of a single pages into a single transaction,
  * which may include multiple chunks of block allocations.
  *
- * This could be called via ext4_write_begin() or later
- * ext4_da_writepages() in delalyed allocation case.
+ * This could be called via ext4_write_begin()
  *
- * In both case it's possible that we could allocating multiple
- * chunks of blocks. We need to consider the worse case, when
+ * We need to consider the worse case, when
  * one new block per extent.
  */
 int ext4_writepage_trans_blocks(struct inode *inode)
-- 
GitLab


From 16eb72956496594d023a7d7cd14a86404ad195ad Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Tue, 19 Aug 2008 21:16:54 -0400
Subject: [PATCH 016/869] ext4: make sure ext4_has_free_blocks returns 0 for
 ENOSPC

Fix ext4_has_free_blocks() to return 0 when we don't have enough space.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/balloc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index 1ae5004e93f..e9fa960ba6d 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -1626,6 +1626,9 @@ ext4_fsblk_t ext4_has_free_blocks(struct ext4_sb_info *sbi,
 		free_blocks =
 			percpu_counter_sum_and_set(&sbi->s_freeblocks_counter);
 #endif
+	if (free_blocks <= root_blocks)
+		/* we don't have free space */
+		return 0;
 	if (free_blocks - root_blocks < nblocks)
 		return free_blocks - root_blocks;
 	return nblocks;
-- 
GitLab


From 91246c009094142f95ecc7573b7caed2bcef52c7 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Tue, 19 Aug 2008 21:14:52 -0400
Subject: [PATCH 017/869] ext4: Initialize writeback_index to 0 when allocating
 a new inode

The write_cache_pages() function uses the mapping->writeback_index as
the starting index to write out when range_cyclic is set.  Properly
initialize writeback_index so that we start the writeout at index 0.

This was found when debugging the small file fragmentation on ext4.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/super.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index d5d77958b86..566344b926b 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -568,6 +568,7 @@ static struct inode *ext4_alloc_inode(struct super_block *sb)
 #endif
 	ei->i_block_alloc_info = NULL;
 	ei->vfs_inode.i_version = 1;
+	ei->vfs_inode.i_data.writeback_index = 0;
 	memset(&ei->i_cached_extent, 0, sizeof(struct ext4_ext_cache));
 	INIT_LIST_HEAD(&ei->i_prealloc_list);
 	spin_lock_init(&ei->i_prealloc_lock);
-- 
GitLab


From 5e745b041f2ccad63077118b40468521306f3962 Mon Sep 17 00:00:00 2001
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Date: Mon, 18 Aug 2008 18:00:57 -0400
Subject: [PATCH 018/869] ext4: Fix small file fragmentation

For small file block allocations, mballoc uses per cpu prealloc
space.  Use goal block when searching for the right prealloc
space.  Also make sure ext4_da_writepages tries to write
all the pages for small files in single attempt

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 fs/ext4/inode.c   | 21 +++++++++++++------
 fs/ext4/mballoc.c | 53 ++++++++++++++++++++++++++++++++++++++++-------
 2 files changed, 61 insertions(+), 13 deletions(-)

diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index d1906d9a22d..7e91913e325 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -2282,13 +2282,12 @@ static int ext4_da_writepages_trans_blocks(struct inode *inode)
 static int ext4_da_writepages(struct address_space *mapping,
 			      struct writeback_control *wbc)
 {
-	struct inode *inode = mapping->host;
 	handle_t *handle = NULL;
-	int needed_blocks;
-	int ret = 0;
-	long to_write;
 	loff_t range_start = 0;
-	long pages_skipped = 0;
+	struct inode *inode = mapping->host;
+	int needed_blocks, ret = 0, nr_to_writebump = 0;
+	long to_write, pages_skipped = 0;
+	struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
 
 	/*
 	 * No pages to write? This is mainly a kludge to avoid starting
@@ -2297,6 +2296,16 @@ static int ext4_da_writepages(struct address_space *mapping,
 	 */
 	if (!mapping->nrpages || !mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
 		return 0;
+	/*
+	 * Make sure nr_to_write is >= sbi->s_mb_stream_request
+	 * This make sure small files blocks are allocated in
+	 * single attempt. This ensure that small files
+	 * get less fragmented.
+	 */
+	if (wbc->nr_to_write < sbi->s_mb_stream_request) {
+		nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write;
+		wbc->nr_to_write = sbi->s_mb_stream_request;
+	}
 
 	if (!wbc->range_cyclic)
 		/*
@@ -2377,7 +2386,7 @@ restart_loop:
 	}
 
 out_writepages:
-	wbc->nr_to_write = to_write;
+	wbc->nr_to_write = to_write - nr_to_writebump;
 	wbc->range_start = range_start;
 	return ret;
 }
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 865e9ddb44d..e0e3a5eb1dd 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -3281,6 +3281,35 @@ static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac,
 	mb_debug("use %u/%u from group pa %p\n", pa->pa_lstart-len, len, pa);
 }
 
+/*
+ * Return the prealloc space that have minimal distance
+ * from the goal block. @cpa is the prealloc
+ * space that is having currently known minimal distance
+ * from the goal block.
+ */
+static struct ext4_prealloc_space *
+ext4_mb_check_group_pa(ext4_fsblk_t goal_block,
+			struct ext4_prealloc_space *pa,
+			struct ext4_prealloc_space *cpa)
+{
+	ext4_fsblk_t cur_distance, new_distance;
+
+	if (cpa == NULL) {
+		atomic_inc(&pa->pa_count);
+		return pa;
+	}
+	cur_distance = abs(goal_block - cpa->pa_pstart);
+	new_distance = abs(goal_block - pa->pa_pstart);
+
+	if (cur_distance < new_distance)
+		return cpa;
+
+	/* drop the previous reference */
+	atomic_dec(&cpa->pa_count);
+	atomic_inc(&pa->pa_count);
+	return pa;
+}
+
 /*
  * search goal blocks in preallocated space
  */
@@ -3290,7 +3319,8 @@ ext4_mb_use_preallocated(struct ext4_allocation_context *ac)
 	int order, i;
 	struct ext4_inode_info *ei = EXT4_I(ac->ac_inode);
 	struct ext4_locality_group *lg;
-	struct ext4_prealloc_space *pa;
+	struct ext4_prealloc_space *pa, *cpa = NULL;
+	ext4_fsblk_t goal_block;
 
 	/* only data can be preallocated */
 	if (!(ac->ac_flags & EXT4_MB_HINT_DATA))
@@ -3333,6 +3363,13 @@ ext4_mb_use_preallocated(struct ext4_allocation_context *ac)
 		/* The max size of hash table is PREALLOC_TB_SIZE */
 		order = PREALLOC_TB_SIZE - 1;
 
+	goal_block = ac->ac_g_ex.fe_group * EXT4_BLOCKS_PER_GROUP(ac->ac_sb) +
+		     ac->ac_g_ex.fe_start +
+		     le32_to_cpu(EXT4_SB(ac->ac_sb)->s_es->s_first_data_block);
+	/*
+	 * search for the prealloc space that is having
+	 * minimal distance from the goal block.
+	 */
 	for (i = order; i < PREALLOC_TB_SIZE; i++) {
 		rcu_read_lock();
 		list_for_each_entry_rcu(pa, &lg->lg_prealloc_list[i],
@@ -3340,17 +3377,19 @@ ext4_mb_use_preallocated(struct ext4_allocation_context *ac)
 			spin_lock(&pa->pa_lock);
 			if (pa->pa_deleted == 0 &&
 					pa->pa_free >= ac->ac_o_ex.fe_len) {
-				atomic_inc(&pa->pa_count);
-				ext4_mb_use_group_pa(ac, pa);
-				spin_unlock(&pa->pa_lock);
-				ac->ac_criteria = 20;
-				rcu_read_unlock();
-				return 1;
+
+				cpa = ext4_mb_check_group_pa(goal_block,
+								pa, cpa);
 			}
 			spin_unlock(&pa->pa_lock);
 		}
 		rcu_read_unlock();
 	}
+	if (cpa) {
+		ext4_mb_use_group_pa(ac, cpa);
+		ac->ac_criteria = 20;
+		return 1;
+	}
 	return 0;
 }
 
-- 
GitLab


From 4537398d91e6e03811ba971d959b762137058c1a Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Sun, 27 Jul 2008 19:59:21 -0400
Subject: [PATCH 019/869] ext4: Update documentation to remind users to update
 mke2fs.conf

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
---
 Documentation/filesystems/ext4.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 80e193d82e2..0d5394920a3 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -26,6 +26,12 @@ Mailing list: linux-ext4@vger.kernel.org
 
     git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git
 
+  - Note that it is highly important to install the mke2fs.conf file
+    that comes with the e2fsprogs 1.41.x sources in /etc/mke2fs.conf. If
+    you have edited the /etc/mke2fs.conf file installed on your system,
+    you will need to merge your changes with the version from e2fsprogs
+    1.41.x.
+
   - Create a new filesystem using the ext4dev filesystem type:
 
     	# mke2fs -t ext4dev /dev/hda1
-- 
GitLab


From d211f052fa58a053639bc51501cb64421157d362 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Wed, 6 Aug 2008 18:21:18 +0100
Subject: [PATCH 020/869] [SCSI] sd: fix USB devices incorrectly reporting DIF
 support

Some USB devices set the protect bit in the INQUIRY data which
currently causes the DIF code in sd to assume (incorrectly) that they
support READ_CAPACITY(16).  Fix this (only for the time being) by
making sure we only believe the protect bit in the inquiry data if the
device claims conformance to SCSI-3 or above.

Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 include/scsi/scsi_device.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 291d56a1916..80b2e93c293 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -6,6 +6,7 @@
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
 #include <linux/blkdev.h>
+#include <scsi/scsi.h>
 #include <asm/atomic.h>
 
 struct request_queue;
@@ -426,7 +427,7 @@ static inline int scsi_device_enclosure(struct scsi_device *sdev)
 
 static inline int scsi_device_protection(struct scsi_device *sdev)
 {
-	return sdev->inquiry[5] & (1<<0);
+	return sdev->scsi_level > SCSI_2 && sdev->inquiry[5] & (1<<0);
 }
 
 #define MODULE_ALIAS_SCSI_DEVICE(type) \
-- 
GitLab


From e77eb36472cdc425a3a81356c7b368e59a36da31 Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Tue, 5 Aug 2008 13:16:56 +0900
Subject: [PATCH 021/869] sh: mach-x3proto: Fix up smc91x platform data.

smc91x on x3proto needs 16-bit access and nowait, which we can now do
through the platform data.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-x3proto/setup.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index abc5b6d418f..a70d23b2178 100644
--- a/arch/sh/boards/mach-x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
@@ -3,7 +3,7 @@
  *
  * Renesas SH-X3 Prototype Board Support.
  *
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2008 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/kernel.h>
 #include <linux/io.h>
+#include <linux/smc91x.h>
 #include <asm/ilsel.h>
 
 static struct resource heartbeat_resources[] = {
@@ -30,6 +31,10 @@ static struct platform_device heartbeat_device = {
 	.resource	= heartbeat_resources,
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start		= 0x18000300,
@@ -47,6 +52,9 @@ static struct platform_device smc91x_device = {
 	.id		= -1,
 	.resource	= smc91x_resources,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.dev	= {
+		.platform_data = &smc91x_info,
+	},
 };
 
 static struct resource r8a66597_usb_host_resources[] = {
-- 
GitLab


From 7265706c8fd57722f622f336ec110cb35f83e739 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 5 Aug 2008 18:37:11 +0300
Subject: [PATCH 022/869] fix SH7705_CACHE_32KB compilation

This patches compile errors like the following caused by
commit 51f3547d619956e9b428bfff17004d8f4d259a02
(sh: Allow SH-3 and SH-5 to use common headers):

<--  snip  -->

...
  CC      arch/sh/mm/init.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/init.c: In function 'mem_init':
/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/mm/init.c:232: error: implicit declaration of function 'p3_cache_init'
make[2]: *** [arch/sh/mm/init.o] Error 1
make[1]: *** [arch/sh/mm] Error 2
...
  CC      kernel/fork.o
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/fork.c: In function 'dup_mmap':
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/fork.c:323: error: implicit declaration of function 'flush_dcache_mmap_lock'
/home/bunk/linux/kernel-2.6/git/linux-2.6/kernel/fork.c:325: error: implicit declaration of function 'flush_dcache_mmap_unlock'
make[2]: *** [kernel/fork.o] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/cpu-sh3/cpu/cacheflush.h | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
index abc90988080..1ac27aae670 100644
--- a/arch/sh/include/cpu-sh3/cpu/cacheflush.h
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -29,6 +29,16 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned l
 void flush_dcache_page(struct page *pg);
 void flush_icache_range(unsigned long start, unsigned long end);
 void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+/* SH3 has unified cache so no special action needed here */
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+
 #else
 #include <cpu-common/cpu/cacheflush.h>
 #endif
-- 
GitLab


From d09d328c119a9ac20615fc8b1431aa417955ad4d Mon Sep 17 00:00:00 2001
From: Yoshinori Sato <ysato@users.sourceforge.jp>
Date: Wed, 6 Aug 2008 14:47:54 +0900
Subject: [PATCH 023/869] sh: Don't export __{s,u}divsi3_i4i from SH-2 libgcc.

rsk7203_defconfig fails to build with the following error:

<--  snip  -->

...
  LD      .tmp_vmlinux1
arch/sh/kernel/built-in.o:(__ksymtab+0xb8): undefined reference to `__udivsi3_i4i'
arch/sh/kernel/built-in.o:(__ksymtab+0xc8): undefined reference to `__sdivsi3_i4i'
make[1]: *** [.tmp_vmlinux1] Error 1

<--  snip  -->

That worked with 2.6.26, and these are far less undefined references
than in the cases where libgcc was missing.

[ These symbols are not defined on SH-2 versions of libgcc, so we have to
  special case the export there. - Paul ]

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/sh_ksyms_32.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c
index 8f916536719..6e1b1c27165 100644
--- a/arch/sh/kernel/sh_ksyms_32.c
+++ b/arch/sh/kernel/sh_ksyms_32.c
@@ -107,10 +107,12 @@ DECLARE_EXPORT(__movmemSI12_i4);
  * GCC >= 4.2 emits these for division, as do GCC 4.1.x versions of the ST
  * compiler which include backported patches.
  */
-DECLARE_EXPORT(__sdivsi3_i4i);
 DECLARE_EXPORT(__udiv_qrnnd_16);
+#if !defined(CONFIG_CPU_SH2)
+DECLARE_EXPORT(__sdivsi3_i4i);
 DECLARE_EXPORT(__udivsi3_i4i);
 #endif
+#endif
 #else /* GCC 3.x */
 DECLARE_EXPORT(__movstr_i4_even);
 DECLARE_EXPORT(__movstr_i4_odd);
-- 
GitLab


From 68b7c24cf9c699ed93c4a70f958b5bb3943723bc Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Wed, 6 Aug 2008 15:10:49 +0900
Subject: [PATCH 024/869] sh: Disable 64kB hugetlbpage size when using 64kB
 PAGE_SIZE.

Presently we oops in mm/hugetlb.c:1325, which is the order == 0 test in
hugetlb_add_hstate() called at initialization time. So, disable 64kB
huge pages when we're using a 64kB PAGE_SIZE. On most parts this will
force the default to be 1MB huge pages.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 9c131cac91a..8a03926ea84 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -181,10 +181,12 @@ config ENTRY_OFFSET
 choice
 	prompt "HugeTLB page size"
 	depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+	default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
 	default HUGETLB_PAGE_SIZE_64K
 
 config HUGETLB_PAGE_SIZE_64K
 	bool "64kB"
+	depends on !PAGE_SIZE_64KB
 
 config HUGETLB_PAGE_SIZE_256K
 	bool "256kB"
-- 
GitLab


From 0a766a6b7dd9f3d15c32d724555d954dc6bb020d Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Fri, 8 Aug 2008 14:29:58 +0900
Subject: [PATCH 025/869] sh: Add support sh_eth to sh7763rdp board

SH7763 has sh_eth device. This patch add sh_eth platform device
to this board.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-sh7763rdp/setup.c | 34 +++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 925f16af712..49940d192d6 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -15,8 +15,9 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/mtd/physmap.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include <asm/sh7763rdp.h>
+#include <asm/sh_eth.h>
 
 /* NOR Flash */
 static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
@@ -60,8 +61,36 @@ static struct platform_device sh7763rdp_nor_flash_device = {
 	},
 };
 
+/* SH-Ether */
+static struct resource sh_eth_resources[] = {
+	{
+		.start  = 0xFEE00800,   /* use eth1 */
+		.end    = 0xFEE00F7C - 1,
+		.flags  = IORESOURCE_MEM,
+	}, {
+		.start  = 58,   /* irq number */
+		.end    = 58,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_eth_plat_data sh7763_eth_pdata = {
+	.phy = 1,
+	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+};
+
+static struct platform_device sh7763rdp_eth_device = {
+	.name       = "sh-eth",
+	.resource   = sh_eth_resources,
+	.num_resources  = ARRAY_SIZE(sh_eth_resources),
+	.dev        = {
+		.platform_data = &sh7763_eth_pdata,
+	},
+};
+
 static struct platform_device *sh7763rdp_devices[] __initdata = {
 	&sh7763rdp_nor_flash_device,
+	&sh7763rdp_eth_device,
 };
 
 static int __init sh7763rdp_devices_setup(void)
@@ -69,7 +98,8 @@ static int __init sh7763rdp_devices_setup(void)
 	return platform_add_devices(sh7763rdp_devices,
 				    ARRAY_SIZE(sh7763rdp_devices));
 }
-__initcall(sh7763rdp_devices_setup);
+
+device_initcall(sh7763rdp_devices_setup);
 
 static void __init sh7763rdp_setup(char **cmdline_p)
 {
-- 
GitLab


From 674063c5a5461e39c0eb0b33570d467708ec0ecd Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Fri, 8 Aug 2008 14:30:06 +0900
Subject: [PATCH 026/869] sh: Add support sh7760fb to sh7763rdp board

Add sh7760fb platform device to sh7763rdp's setup.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/mach-sh7763rdp/setup.c | 52 ++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
index 49940d192d6..23850da05e3 100644
--- a/arch/sh/boards/mach-sh7763rdp/setup.c
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -15,9 +15,11 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/mtd/physmap.h>
+#include <linux/fb.h>
 #include <linux/io.h>
 #include <asm/sh7763rdp.h>
 #include <asm/sh_eth.h>
+#include <asm/sh7760fb.h>
 
 /* NOR Flash */
 static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
@@ -88,9 +90,58 @@ static struct platform_device sh7763rdp_eth_device = {
 	},
 };
 
+/* SH7763 LCDC */
+static struct resource sh7763rdp_fb_resources[] = {
+	{
+		.start  = 0xFFE80000,
+		.end    = 0xFFE80442 - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct fb_videomode sh7763fb_videomode = {
+	.refresh = 60,
+	.name = "VGA Monitor",
+	.xres = 640,
+	.yres = 480,
+	.pixclock = 10000,
+	.left_margin = 80,
+	.right_margin = 24,
+	.upper_margin = 30,
+	.lower_margin = 1,
+	.hsync_len = 96,
+	.vsync_len = 1,
+	.sync = 0,
+	.vmode = FB_VMODE_NONINTERLACED,
+	.flag = FBINFO_FLAG_DEFAULT,
+};
+
+static struct sh7760fb_platdata sh7763fb_def_pdata = {
+	.def_mode = &sh7763fb_videomode,
+	.ldmtr = (LDMTR_TFT_COLOR_16|LDMTR_MCNT),
+	.lddfr = LDDFR_16BPP_RGB565,
+	.ldpmmr = 0x0000,
+	.ldpspr = 0xFFFF,
+	.ldaclnr = 0x0001,
+	.ldickr = 0x1102,
+	.rotate = 0,
+	.novsync = 0,
+	.blank = NULL,
+};
+
+static struct platform_device sh7763rdp_fb_device = {
+	.name		= "sh7760-lcdc",
+	.resource	= sh7763rdp_fb_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_fb_resources),
+	.dev = {
+		.platform_data = &sh7763fb_def_pdata,
+	},
+};
+
 static struct platform_device *sh7763rdp_devices[] __initdata = {
 	&sh7763rdp_nor_flash_device,
 	&sh7763rdp_eth_device,
+	&sh7763rdp_fb_device,
 };
 
 static int __init sh7763rdp_devices_setup(void)
@@ -98,7 +149,6 @@ static int __init sh7763rdp_devices_setup(void)
 	return platform_add_devices(sh7763rdp_devices,
 				    ARRAY_SIZE(sh7763rdp_devices));
 }
-
 device_initcall(sh7763rdp_devices_setup);
 
 static void __init sh7763rdp_setup(char **cmdline_p)
-- 
GitLab


From a66b44b103755ecad84b4817c4e3253234d2b03d Mon Sep 17 00:00:00 2001
From: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Date: Fri, 8 Aug 2008 14:30:13 +0900
Subject: [PATCH 027/869] sh: Update sh7763rdp defconfig

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/sh7763rdp_defconfig | 113 ++++++++++++++++++++++++----
 1 file changed, 97 insertions(+), 16 deletions(-)

diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index 83f3fe5db3e..baf830c4a7e 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,15 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Fri Jun  6 12:20:17 2008
+# Linux kernel version: 2.6.27-rc2
+# Fri Aug  8 13:44:20 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -19,7 +21,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -83,10 +84,16 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -96,12 +103,13 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -177,6 +185,7 @@ CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -258,6 +267,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -282,10 +292,6 @@ CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -377,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -471,6 +480,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -515,10 +525,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -546,7 +556,9 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -613,7 +625,11 @@ CONFIG_INPUT=y
 #
 # Character devices
 #
-# CONFIG_VT is not set
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -644,6 +660,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -655,6 +672,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -679,7 +697,34 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
+CONFIG_FB_SH7760=y
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -688,8 +733,22 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
-#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -788,11 +847,27 @@ CONFIG_USB_MON=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -865,6 +940,7 @@ CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -874,12 +950,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -949,6 +1024,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
@@ -1003,6 +1079,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1042,6 +1122,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-- 
GitLab


From 2fc91882c24908f5f785ed094cfe74214c44af8d Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 11 Aug 2008 14:52:46 +0900
Subject: [PATCH 028/869] sh: remove MSTPCR defines from Migo-R header file

Remove MSTPCR register definitions from Migo-R header file. The clock
frame work should be used instead of direct register access.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/migor.h | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/sh/include/asm/migor.h b/arch/sh/include/asm/migor.h
index 10016e0f4a4..c12b632c540 100644
--- a/arch/sh/include/asm/migor.h
+++ b/arch/sh/include/asm/migor.h
@@ -42,9 +42,6 @@
 
 #define PORT_MSELCRB 0xa4050182
 
-#define MSTPCR1 0xa4150034
-#define MSTPCR2 0xa4150038
-
 #define PORT_PSELA 0xa405014e
 #define PORT_PSELB 0xa4050150
 #define PORT_PSELC 0xa4050152
-- 
GitLab


From b6ce9ad05f782e6a00aed8432d9513dc394115ce Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 11 Aug 2008 14:53:49 +0900
Subject: [PATCH 029/869] input: migor_ts compile and detection fix

The i2c layer got changed while the migor_ts driver was in the input
tree waiting to get merged upstream. Fix current compile issue by using
struct i2c_client member "name" instead of "driver_name". Also, add
id_table to make sure the device gets properly detected.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/input/touchscreen/migor_ts.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c
index c1cd99d5898..504ca11749a 100644
--- a/drivers/input/touchscreen/migor_ts.c
+++ b/drivers/input/touchscreen/migor_ts.c
@@ -173,7 +173,7 @@ static int migor_ts_probe(struct i2c_client *client,
 	input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
 	input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
 
-	input->name = client->driver_name;
+	input->name = client->name;
 	input->id.bustype = BUS_I2C;
 	input->dev.parent = &client->dev;
 
@@ -192,7 +192,7 @@ static int migor_ts_probe(struct i2c_client *client,
 		goto err1;
 
 	error = request_irq(priv->irq, migor_ts_isr, IRQF_TRIGGER_LOW,
-			    client->driver_name, priv);
+			    client->name, priv);
 	if (error) {
 		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
 		goto err2;
@@ -224,12 +224,19 @@ static int migor_ts_remove(struct i2c_client *client)
 	return 0;
 }
 
+static const struct i2c_device_id migor_ts_id[] = {
+	{ "migor_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, migor_ts);
+
 static struct i2c_driver migor_ts_driver = {
 	.driver = {
 		.name = "migor_ts",
 	},
 	.probe = migor_ts_probe,
 	.remove = migor_ts_remove,
+	.id_table = migor_ts_id,
 };
 
 static int __init migor_ts_init(void)
-- 
GitLab


From 2a5323cd69ff485c1b68960f2b4802cf252558f1 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 11 Aug 2008 14:59:03 +0900
Subject: [PATCH 030/869] sh: export sh7723 VEU as VEU2H

Export sh7723 VEU hardware blocks as VEU2H. The sh7723 VEU2H differs
a bit from the sh7722 VEU so use different names for our UIO devices.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh4a/setup-sh7723.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index cd6baffdc89..a7412cede53 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -45,7 +45,7 @@ static struct platform_device vpu_device = {
 };
 
 static struct uio_info veu0_platform_data = {
-	.name = "VEU",
+	.name = "VEU2H",
 	.version = "0",
 	.irq = 54,
 };
@@ -73,7 +73,7 @@ static struct platform_device veu0_device = {
 };
 
 static struct uio_info veu1_platform_data = {
-	.name = "VEU",
+	.name = "VEU2H",
 	.version = "0",
 	.irq = 27,
 };
-- 
GitLab


From 0c13bf1e7c98668ce69eaedd215ec32f9e1361ae Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 11 Aug 2008 15:13:24 +0900
Subject: [PATCH 031/869] sh: select memchunk size using kernel cmdline

Allow user to pass parameters on kernel command line to override
default size for physically contiguous memory buffers. The default
VPU buffer size is too small for VGA harware encoding, but instead
of just bumping up the number we allow the user to override the
default size using the command line. Supports SuperH Mobile hardware
blocks such as VEU, VPU and CEU.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/consistent.c | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index b2ce014401b..895bb3f335c 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -95,6 +95,29 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 }
 EXPORT_SYMBOL(dma_cache_sync);
 
+static int __init memchunk_setup(char *str)
+{
+	return 1; /* accept anything that begins with "memchunk." */
+}
+__setup("memchunk.", memchunk_setup);
+
+static void memchunk_cmdline_override(char *name, unsigned long *sizep)
+{
+	char *p = boot_command_line;
+	int k = strlen(name);
+
+	while ((p = strstr(p, "memchunk."))) {
+		p += 9; /* strlen("memchunk.") */
+		if (!strncmp(name, p, k) && p[k] == '=') {
+			p += k + 1;
+			*sizep = memparse(p, NULL);
+			pr_info("%s: forcing memory chunk size to 0x%08lx\n",
+				name, *sizep);
+			break;
+		}
+	}
+}
+
 int platform_resource_setup_memory(struct platform_device *pdev,
 				   char *name, unsigned long memsize)
 {
@@ -109,6 +132,10 @@ int platform_resource_setup_memory(struct platform_device *pdev,
 		return -EINVAL;
 	}
 
+	memchunk_cmdline_override(name, &memsize);
+	if (!memsize)
+		return 0;
+
 	buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
 	if (!buf) {
 		pr_warning("%s: unable to allocate memory\n", name);
-- 
GitLab


From ce9c008c8bea25a974d9027b7c6602d535639899 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Mon, 11 Aug 2008 15:26:00 +0900
Subject: [PATCH 032/869] video: export sh_mobile_lcdc panel size

Export the LCD panel size for sh_mobile_lcdc boards. This allows us
to perform dpi and screen aspect ratio calculations in user space.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/boards/board-ap325rxa.c      | 4 ++++
 arch/sh/boards/mach-migor/setup.c    | 8 ++++++++
 arch/sh/include/asm/sh_mobile_lcdc.h | 6 ++++++
 drivers/video/sh_mobile_lcdcfb.c     | 2 ++
 4 files changed, 20 insertions(+)

diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 025d4fe55a5..fd1612590bf 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -140,6 +140,10 @@ static struct sh_mobile_lcdc_info lcdc_info = {
 			.vsync_len = 1,
 			.sync = 0, /* hsync and vsync are active low */
 		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
 		.board_cfg = {
 			.display_on = ap320_wvga_power_on,
 		},
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index e499ee384d5..714dce91cc9 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -224,6 +224,10 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 			.vsync_len = 2,
 			.sync = 0,
 		},
+		.lcd_size_cfg = { /* 7.0 inch */
+			.width = 152,
+			.height = 91,
+		},
 	}
 #endif
 #ifdef CONFIG_SH_MIGOR_QVGA
@@ -245,6 +249,10 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
 			.vsync_len = 2,
 			.sync = FB_SYNC_HOR_HIGH_ACT,
 		},
+		.lcd_size_cfg = { /* 2.4 inch */
+			.width = 49,
+			.height = 37,
+		},
 		.board_cfg = {
 			.setup_sys = migor_lcd_qvga_setup,
 		},
diff --git a/arch/sh/include/asm/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h
index 27677727df4..130102f663f 100644
--- a/arch/sh/include/asm/sh_mobile_lcdc.h
+++ b/arch/sh/include/asm/sh_mobile_lcdc.h
@@ -47,12 +47,18 @@ struct sh_mobile_lcdc_board_cfg {
 	void (*display_off)(void *board_data);
 };
 
+struct sh_mobile_lcdc_lcd_size_cfg { /* width and height of panel in mm */
+	unsigned long width;
+	unsigned long height;
+};
+
 struct sh_mobile_lcdc_chan_cfg {
 	int chan;
 	int bpp;
 	int interface_type; /* selects RGBn or SYSn I/F, see above */
 	int clock_divider;
 	struct fb_videomode lcd_cfg;
+	struct sh_mobile_lcdc_lcd_size_cfg lcd_size_cfg;
 	struct sh_mobile_lcdc_board_cfg board_cfg;
 	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
 };
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index f6ef6cca73c..4c32c06579a 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -595,6 +595,8 @@ static int __init sh_mobile_lcdc_probe(struct platform_device *pdev)
 		info->fbops = &sh_mobile_lcdc_ops;
 		info->var.xres = info->var.xres_virtual = cfg->lcd_cfg.xres;
 		info->var.yres = info->var.yres_virtual = cfg->lcd_cfg.yres;
+		info->var.width = cfg->lcd_size_cfg.width;
+		info->var.height = cfg->lcd_size_cfg.height;
 		info->var.activate = FB_ACTIVATE_NOW;
 		error = sh_mobile_lcdc_set_bpp(&info->var, cfg->bpp);
 		if (error)
-- 
GitLab


From 74c27c43ebd020fcb65364613503f6c08dc6f535 Mon Sep 17 00:00:00 2001
From: Takashi YOSHII <yoshii.takashi@renesas.com>
Date: Mon, 11 Aug 2008 20:10:54 +0900
Subject: [PATCH 033/869] binfmt_flat: Stub in a FLAT_PLAT_INIT().

This provides a FLAT_PLAT_INIT() arch hook for platforms that need to set
up specific register state prior to calling in to the process, as per
ELF_PLAT_INIT().

Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 fs/binfmt_flat.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 56372ecf169..dfc0197905c 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -914,7 +914,9 @@ static int load_flat_binary(struct linux_binprm * bprm, struct pt_regs * regs)
 	/* Stash our initial stack pointer into the mm structure */
 	current->mm->start_stack = (unsigned long )sp;
 
-	
+#ifdef FLAT_PLAT_INIT
+	FLAT_PLAT_INIT(regs);
+#endif
 	DBG_FLT("start_thread(regs=0x%x, entry=0x%x, start_stack=0x%x)\n",
 		(int)regs, (int)start_addr, (int)current->mm->start_stack);
 	
-- 
GitLab


From 9b9d6b2a4f6df5544a10de44760755fe757259e5 Mon Sep 17 00:00:00 2001
From: Takashi YOSHII <yoshii.takashi@renesas.com>
Date: Mon, 11 Aug 2008 20:12:52 +0900
Subject: [PATCH 034/869] sh: Provide a FLAT_PLAT_INIT() definition.

SH needs this in order to make sure that r4 has a sane value at process
entry time, which the libc expects has already been taken care of.

Fixes random crashes in flat binaries.

Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/flat.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h
index 0cc800299e0..d3b2b4f109e 100644
--- a/arch/sh/include/asm/flat.h
+++ b/arch/sh/include/asm/flat.h
@@ -21,4 +21,11 @@
 #define	flat_get_relocate_addr(rel)		(rel)
 #define	flat_set_persistent(relval, p)		({ (void)p; 0; })
 
+#define FLAT_PLAT_INIT(_r) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
 #endif /* __ASM_SH_FLAT_H */
-- 
GitLab


From 9dd1e9eb5cd6f79d4efda57db4e26dfa31ff9ae5 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Mon, 11 Aug 2008 23:11:05 +0200
Subject: [PATCH 035/869] x86/PCI: allow scanning of 255 PCI busses

Fix an old off by one error in the legacy PCI bus check. 0xff
is a valid bus.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/legacy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index ec9ce35e44d..b722dd481b3 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -14,7 +14,7 @@ static void __devinit pcibios_fixup_peer_bridges(void)
 	int n, devfn;
 	long node;
 
-	if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
+	if (pcibios_last_bus <= 0 || pcibios_last_bus > 0xff)
 		return;
 	DBG("PCI: Peer bridge fixup\n");
 
-- 
GitLab


From 67a6e80ede815224db22518cd08350277bbeddb9 Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Sat, 26 Jul 2008 00:51:12 +0100
Subject: [PATCH 036/869] [ARM] eseries: whitespace fixes and cleanup

Signed-off-by: Ian Molton
---
 arch/arm/mach-pxa/eseries.c | 96 ++++++++++++++++++-------------------
 1 file changed, 48 insertions(+), 48 deletions(-)

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 03942450885..112f72926d2 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -21,7 +21,7 @@
 
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
-                      struct tag *tags, char **cmdline, struct meminfo *mi)
+	struct tag *tags, char **cmdline, struct meminfo *mi)
 {
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
@@ -36,79 +36,79 @@ static void __init eseries_fixup(struct machine_desc *desc,
 
 #ifdef CONFIG_MACH_E330
 MACHINE_START(E330, "Toshiba e330")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E350
 MACHINE_START(E350, "Toshiba e350")
 	/* Maintainer: Ian Molton (spyro@f2s.com) */
-	.phys_io        = 0x40000000,
-	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.boot_params    = 0xa0000100,
-	.map_io         = pxa_map_io,
-	.init_irq       = pxa25x_init_irq,
-	.fixup          = eseries_fixup,
-	.timer = &pxa_timer,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E750
 MACHINE_START(E750, "Toshiba e750")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E400
 MACHINE_START(E400, "Toshiba e400")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
 #ifdef CONFIG_MACH_E800
 MACHINE_START(E800, "Toshiba e800")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.timer		= &pxa_timer,
 MACHINE_END
 #endif
 
-- 
GitLab


From 5fedd0afd661cf2d387a6eb1b0df78ddbc0c9086 Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Fri, 25 Jul 2008 12:02:31 +0100
Subject: [PATCH 037/869] [ARM] clocklib: Allow dynamic alias creation

This patch allows dynamic creation of clock aliases in order to
make it possible to have platform independent clock names for use in
device drivers.

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/clock.c | 25 +++++++++++++++++++++++++
 arch/arm/mach-pxa/clock.h |  5 +++++
 2 files changed, 30 insertions(+)

diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index c01eea88f78..ca8e2053815 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -125,3 +125,28 @@ void clks_register(struct clk *clks, size_t num)
 		list_add(&clks[i].node, &clocks);
 	mutex_unlock(&clocks_mutex);
 }
+
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+	struct device *dev)
+{
+	struct clk *r = clk_lookup(dev, id);
+	struct clk *new;
+
+	if (!r)
+		return -ENODEV;
+
+	new = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	if (!new)
+		return -ENOMEM;
+
+	new->name = alias;
+	new->dev = alias_dev;
+	new->other = r;
+
+	mutex_lock(&clocks_mutex);
+	list_add(&new->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+
+	return 0;
+}
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 1ec8f9178aa..73be795fe3b 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,3 +1,5 @@
+#include <linux/list.h>
+
 struct clk;
 
 struct clkops {
@@ -86,3 +88,6 @@ extern void clk_pxa3xx_cken_disable(struct clk *);
 #endif
 
 void clks_register(struct clk *clks, size_t num);
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+	struct device *dev);
+
-- 
GitLab


From c1ed406c212973bd59712a0ab722639a75381898 Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Sat, 26 Jul 2008 00:52:36 +0100
Subject: [PATCH 038/869] [ARM] clocklib: Update users of aliases to new API

This patch removes the hardcoded alias array from pxa25x.c and reimplements
its functionality using the new clock alias call.

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/lubbock.c |  2 ++
 arch/arm/mach-pxa/pxa25x.c  | 10 +---------
 2 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index bb9e09208b9..4ffdff2d9ff 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -52,6 +52,7 @@
 #include <mach/mmc.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long lubbock_pin_config[] __initdata = {
@@ -485,6 +486,7 @@ static void __init lubbock_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
 
+	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 9e5d8a8c642..305452b56e9 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -166,8 +166,7 @@ static struct clk pxa25x_hwuart_clk =
 ;
 
 /*
- * PXA 2xx clock declarations. Order is important (see aliases below)
- * Please be careful not to disrupt the ordering.
+ * PXA 2xx clock declarations.
  */
 static struct clk pxa25x_clks[] = {
 	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
@@ -194,11 +193,6 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
 
-static struct clk pxa2xx_clk_aliases[] = {
-	INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
-	INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
-};
-
 #ifdef CONFIG_PM
 
 #define SAVE(x)		sleep_save[SLEEP_SAVE_##x] = x
@@ -375,8 +369,6 @@ static int __init pxa25x_init(void)
 	if (cpu_is_pxa255())
 		ret = platform_device_register(&pxa_device_hwuart);
 
-	clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
-
 	return ret;
 }
 
-- 
GitLab


From dec5abe9219aebf6d65e9af95de1c031d7039bdb Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Sat, 9 Aug 2008 21:26:59 +0100
Subject: [PATCH 039/869] [ARM] Fix eseries IRQ limit

The max IRQ is too small for all e-series machines which have at least one
GPIO expander chip in them.

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/include/mach/irqs.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 32772bc6925..108b5db9b2a 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -183,6 +183,7 @@
       defined(CONFIG_MACH_TOSA) || \
       defined(CONFIG_MACH_MAINSTONE) || \
       defined(CONFIG_MACH_PCM027) || \
+      defined(CONFIG_ARCH_PXA_ESERIES) || \
       defined(CONFIG_MACH_MAGICIAN)
 #define NR_IRQS			(IRQ_BOARD_END)
 #elif defined(CONFIG_MACH_ZYLONITE)
-- 
GitLab


From 2836548826b4187ba770b14d36bc40d52a76b49c Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Sat, 9 Aug 2008 21:48:45 +0100
Subject: [PATCH 040/869] [ARM] e740 config use MFP

This patch updates e740 to use the new MFP GPIO setup code.

Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/eseries.c | 50 ++++++++++++++++++++++++++++++++++++-
 1 file changed, 49 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 112f72926d2..d2700999251 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -10,15 +10,57 @@
  *
  */
 
+#include <linux/kernel.h>
 #include <linux/init.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
 #include "generic.h"
 
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
 	struct tag *tags, char **cmdline, struct meminfo *mi)
@@ -32,6 +74,11 @@ static void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+}
+
 /* e-series machine definitions */
 
 #ifdef CONFIG_MACH_E330
@@ -69,6 +116,7 @@ MACHINE_START(E740, "Toshiba e740")
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
 	.timer		= &pxa_timer,
 MACHINE_END
 #endif
-- 
GitLab


From 908cbc10135755ea055feaa6a8ec209edfe489be Mon Sep 17 00:00:00 2001
From: Ian Molton <spyro@f2s.com>
Date: Sat, 9 Aug 2008 21:50:28 +0100
Subject: [PATCH 041/869] [ARM] e400 config use MFP

    This patch updates e400 to use the new MFP GPIO setup code.

    Signed-off-by: Ian Molton <spyro@f2s.com>
---
 arch/arm/mach-pxa/eseries.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index d2700999251..001a252bd51 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -61,6 +61,24 @@ static unsigned long e740_pin_config[] __initdata = {
 	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
 };
 
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
 	struct tag *tags, char **cmdline, struct meminfo *mi)
@@ -79,6 +97,11 @@ static void __init e740_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
 }
 
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+}
+
 /* e-series machine definitions */
 
 #ifdef CONFIG_MACH_E330
@@ -143,6 +166,7 @@ MACHINE_START(E400, "Toshiba e400")
 	.map_io		= pxa_map_io,
 	.init_irq	= pxa25x_init_irq,
 	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
 	.timer		= &pxa_timer,
 MACHINE_END
 #endif
-- 
GitLab


From 24b8b44780a2c53ecb738f4a1c08d114f5eda27c Mon Sep 17 00:00:00 2001
From: Tom Tucker <tom@opengridcomputing.com>
Date: Wed, 13 Aug 2008 11:05:41 -0500
Subject: [PATCH 042/869] svcrdma: Fix race between svc_rdma_recvfrom thread
 and the dto_tasklet

RDMA_READ completions are kept on a separate queue from the general
I/O request queue. Since a separate lock is used to protect the RDMA_READ
completion queue, a race exists between the dto_tasklet and the
svc_rdma_recvfrom thread where the dto_tasklet sets the XPT_DATA
bit and adds I/O to the read-completion queue. Concurrently, the
recvfrom thread checks the generic queue, finds it empty and resets
the XPT_DATA bit. A subsequent svc_xprt_enqueue will fail to enqueue
the transport for I/O and cause the transport to "stall".

The fix is to protect both lists with the same lock and set the XPT_DATA
bit with this lock held.

Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 include/linux/sunrpc/svc_rdma.h          | 1 -
 net/sunrpc/xprtrdma/svc_rdma_recvfrom.c  | 8 ++++----
 net/sunrpc/xprtrdma/svc_rdma_transport.c | 5 ++---
 3 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h
index ef2e3a20bf3..dc05b54bd3a 100644
--- a/include/linux/sunrpc/svc_rdma.h
+++ b/include/linux/sunrpc/svc_rdma.h
@@ -143,7 +143,6 @@ struct svcxprt_rdma {
 	unsigned long	     sc_flags;
 	struct list_head     sc_dto_q;		/* DTO tasklet I/O pending Q */
 	struct list_head     sc_read_complete_q;
-	spinlock_t           sc_read_complete_lock;
 	struct work_struct   sc_work;
 };
 /* sc_flags */
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index b4b17f44cb2..74de31a0661 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -443,18 +443,18 @@ int svc_rdma_recvfrom(struct svc_rqst *rqstp)
 
 	dprintk("svcrdma: rqstp=%p\n", rqstp);
 
-	spin_lock_bh(&rdma_xprt->sc_read_complete_lock);
+	spin_lock_bh(&rdma_xprt->sc_rq_dto_lock);
 	if (!list_empty(&rdma_xprt->sc_read_complete_q)) {
 		ctxt = list_entry(rdma_xprt->sc_read_complete_q.next,
 				  struct svc_rdma_op_ctxt,
 				  dto_q);
 		list_del_init(&ctxt->dto_q);
 	}
-	spin_unlock_bh(&rdma_xprt->sc_read_complete_lock);
-	if (ctxt)
+	if (ctxt) {
+		spin_unlock_bh(&rdma_xprt->sc_rq_dto_lock);
 		return rdma_read_complete(rqstp, ctxt);
+	}
 
-	spin_lock_bh(&rdma_xprt->sc_rq_dto_lock);
 	if (!list_empty(&rdma_xprt->sc_rq_dto_q)) {
 		ctxt = list_entry(rdma_xprt->sc_rq_dto_q.next,
 				  struct svc_rdma_op_ctxt,
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 19ddc382b77..900cb69728c 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -359,11 +359,11 @@ static void sq_cq_reap(struct svcxprt_rdma *xprt)
 			if (test_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags)) {
 				struct svc_rdma_op_ctxt *read_hdr = ctxt->read_hdr;
 				BUG_ON(!read_hdr);
+				spin_lock_bh(&xprt->sc_rq_dto_lock);
 				set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
-				spin_lock_bh(&xprt->sc_read_complete_lock);
 				list_add_tail(&read_hdr->dto_q,
 					      &xprt->sc_read_complete_q);
-				spin_unlock_bh(&xprt->sc_read_complete_lock);
+				spin_unlock_bh(&xprt->sc_rq_dto_lock);
 				svc_xprt_enqueue(&xprt->sc_xprt);
 			}
 			svc_rdma_put_context(ctxt, 0);
@@ -428,7 +428,6 @@ static struct svcxprt_rdma *rdma_create_xprt(struct svc_serv *serv,
 	init_waitqueue_head(&cma_xprt->sc_send_wait);
 
 	spin_lock_init(&cma_xprt->sc_lock);
-	spin_lock_init(&cma_xprt->sc_read_complete_lock);
 	spin_lock_init(&cma_xprt->sc_rq_dto_lock);
 
 	cma_xprt->sc_ord = svcrdma_ord;
-- 
GitLab


From fde9403a982218fa8a437f815e7aa0e583e2d6ed Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Mon, 11 Aug 2008 12:56:44 +0800
Subject: [PATCH 043/869] [netdrvr] remove unnecessary #include

The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/net/acenic.c
  drivers/net/bnx2x_link.c
  drivers/net/bnx2x_main.c
  drivers/net/cpmac.c
  drivers/net/gianfar_sysfs.c
  drivers/net/ipg.h
  drivers/net/ppp_mppe.c
  drivers/net/pppol2tp.c
  drivers/net/r6040.c
  drivers/net/sh_eth.c
  drivers/net/sky2.c
  drivers/net/tehuti.h
  drivers/net/typhoon.c

This patch removes the said #include <linux/version.h>.

Signed-off-by: Huang Weiyi <hwy@cn.fujitsu.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/acenic.c        | 1 -
 drivers/net/bnx2x_link.c    | 1 -
 drivers/net/bnx2x_main.c    | 1 -
 drivers/net/cpmac.c         | 1 -
 drivers/net/gianfar_sysfs.c | 1 -
 drivers/net/ipg.h           | 2 --
 drivers/net/ppp_mppe.c      | 1 -
 drivers/net/pppol2tp.c      | 1 -
 drivers/net/r6040.c         | 1 -
 drivers/net/sh_eth.c        | 1 -
 drivers/net/sky2.c          | 1 -
 drivers/net/tehuti.h        | 1 -
 drivers/net/typhoon.c       | 1 -
 13 files changed, 14 deletions(-)

diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index e4483de84e7..66de80b64b9 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -52,7 +52,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 8b92c6ad075..4ce7fe9c525 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -21,7 +21,6 @@
 #include <linux/delay.h>
 #include <linux/ethtool.h>
 #include <linux/mutex.h>
-#include <linux/version.h>
 
 #include "bnx2x_reg.h"
 #include "bnx2x_fw_defs.h"
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 3e7dc171cdf..971576b4368 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -44,7 +44,6 @@
 #include <net/ip.h>
 #include <net/tcp.h>
 #include <net/checksum.h>
-#include <linux/version.h>
 #include <net/ip6_checksum.h>
 #include <linux/workqueue.h>
 #include <linux/crc32.h>
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index a7800e55909..ec6b0af3d46 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -26,7 +26,6 @@
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c
index 5116f68e01b..782c2017008 100644
--- a/drivers/net/gianfar_sysfs.c
+++ b/drivers/net/gianfar_sysfs.c
@@ -33,7 +33,6 @@
 
 #include <asm/uaccess.h>
 #include <linux/module.h>
-#include <linux/version.h>
 
 #include "gianfar.h"
 
diff --git a/drivers/net/ipg.h b/drivers/net/ipg.h
index e0e718ab4c2..dd9318f1949 100644
--- a/drivers/net/ipg.h
+++ b/drivers/net/ipg.h
@@ -7,7 +7,6 @@
 #ifndef __LINUX_IPG_H
 #define __LINUX_IPG_H
 
-#include <linux/version.h>
 #include <linux/module.h>
 
 #include <linux/kernel.h>
@@ -21,7 +20,6 @@
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/skbuff.h>
-#include <linux/version.h>
 #include <asm/bitops.h>
 
 /*
diff --git a/drivers/net/ppp_mppe.c b/drivers/net/ppp_mppe.c
index b35d7944950..88f03c9e940 100644
--- a/drivers/net/ppp_mppe.c
+++ b/drivers/net/ppp_mppe.c
@@ -46,7 +46,6 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/types.h>
 #include <linux/slab.h>
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index f9298827a76..ff175e8f36b 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -61,7 +61,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/string.h>
 #include <linux/list.h>
 #include <asm/uaccess.h>
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 6531ff565c5..5d86281d936 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -24,7 +24,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/moduleparam.h>
 #include <linux/string.h>
 #include <linux/timer.h>
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 25e62cf58d3..1c370e6aa64 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -20,7 +20,6 @@
  *  the file called "COPYING".
  */
 
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
 #include <linux/etherdevice.h>
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7d29edcd40b..06dfc950f33 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -24,7 +24,6 @@
 
 #include <linux/crc32.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/netdevice.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index c66dfc9ec1e..7db48f1cd94 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -27,7 +27,6 @@
 #include <linux/sched.h>
 #include <linux/tty.h>
 #include <linux/if_vlan.h>
-#include <linux/version.h>
 #include <linux/interrupt.h>
 #include <linux/vmalloc.h>
 #include <asm/byteorder.h>
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 8549f1159a3..734ce0977f0 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -128,7 +128,6 @@ static const int multicast_filter_limit = 32;
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <linux/in6.h>
-#include <linux/version.h>
 #include <linux/dma-mapping.h>
 
 #include "typhoon.h"
-- 
GitLab


From 2a54adc3ad771c997bfa721f098d2d4a6ef6ea38 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Tue, 12 Aug 2008 15:10:46 -0500
Subject: [PATCH 044/869] gianfar: Call gfar_halt_nodisable() from gfar_halt().

gfar_halt() was factored out into halting and disabling by commit
d87eb12785c14de1586e3bad86ca2c0991300339, as the suspend() method
only wants to do the former.  However, the call to gfar_halt_nodisable()
from gfar_halt() apparently got lost during the patch respin process.

This adds it back.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/gianfar.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index ca6cf6ecb37..999d6916827 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -134,9 +134,7 @@ static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb, int l
 static void gfar_vlan_rx_register(struct net_device *netdev,
 		                struct vlan_group *grp);
 void gfar_halt(struct net_device *dev);
-#ifdef CONFIG_PM
 static void gfar_halt_nodisable(struct net_device *dev);
-#endif
 void gfar_start(struct net_device *dev);
 static void gfar_clear_exact_match(struct net_device *dev);
 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
@@ -631,7 +629,6 @@ static void init_registers(struct net_device *dev)
 }
 
 
-#ifdef CONFIG_PM
 /* Halt the receive and transmit queues */
 static void gfar_halt_nodisable(struct net_device *dev)
 {
@@ -657,7 +654,6 @@ static void gfar_halt_nodisable(struct net_device *dev)
 			cpu_relax();
 	}
 }
-#endif
 
 /* Halt the receive and transmit queues */
 void gfar_halt(struct net_device *dev)
@@ -666,6 +662,8 @@ void gfar_halt(struct net_device *dev)
 	struct gfar __iomem *regs = priv->regs;
 	u32 tempval;
 
+	gfar_halt_nodisable(dev);
+
 	/* Disable Rx and Tx */
 	tempval = gfar_read(&regs->maccfg1);
 	tempval &= ~(MACCFG1_RX_EN | MACCFG1_TX_EN);
-- 
GitLab


From 7144decb0f482fcb2152c10c376f0574d563ca52 Mon Sep 17 00:00:00 2001
From: Mikael Pettersson <mikpe@it.uu.se>
Date: Wed, 13 Aug 2008 21:08:14 +0200
Subject: [PATCH 045/869] ixp4xx_eth: fix dma_mapping_error() compile errors

The arm ixp4xx_eth driver doesn't compile in 2.6.27-rc1:

  CC [M]  drivers/net/arm/ixp4xx_eth.o
drivers/net/arm/ixp4xx_eth.c: In function 'eth_poll':
drivers/net/arm/ixp4xx_eth.c:554: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast
drivers/net/arm/ixp4xx_eth.c:554: error: too few arguments to function 'dma_mapping_error'
drivers/net/arm/ixp4xx_eth.c: In function 'eth_xmit':
drivers/net/arm/ixp4xx_eth.c:701: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast
drivers/net/arm/ixp4xx_eth.c:701: error: too few arguments to function 'dma_mapping_error'
drivers/net/arm/ixp4xx_eth.c: In function 'init_queues':
drivers/net/arm/ixp4xx_eth.c:886: warning: passing argument 1 of 'dma_mapping_error' makes pointer from integer without a cast
drivers/net/arm/ixp4xx_eth.c:886: error: too few arguments to function 'dma_mapping_error'
make[3]: *** [drivers/net/arm/ixp4xx_eth.o] Error 1
make[2]: *** [drivers/net/arm] Error 2
make[1]: *** [drivers/net] Error 2
make: *** [drivers] Error 2

dma_mapping_error() changed in 2.6.27-rc1 to also take a device parameter,
but nobody bothered updating ixp4xx_eth.c. Fixed by passing the appropriate
device value in the dma_mapping_error() calls.

Tested on an ixp425 box.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/arm/ixp4xx_eth.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 9b777d9433c..7d5db2ece1b 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -551,7 +551,7 @@ static int eth_poll(struct napi_struct *napi, int budget)
 		if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
 			phys = dma_map_single(&dev->dev, skb->data,
 					      RX_BUFF_SIZE, DMA_FROM_DEVICE);
-			if (dma_mapping_error(phys)) {
+			if (dma_mapping_error(&dev->dev, phys)) {
 				dev_kfree_skb(skb);
 				skb = NULL;
 			}
@@ -698,7 +698,7 @@ static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
 #endif
 
 	phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-	if (dma_mapping_error(phys)) {
+	if (dma_mapping_error(&dev->dev, phys)) {
 #ifdef __ARMEB__
 		dev_kfree_skb(skb);
 #else
@@ -883,7 +883,7 @@ static int init_queues(struct port *port)
 		desc->buf_len = MAX_MRU;
 		desc->data = dma_map_single(&port->netdev->dev, data,
 					    RX_BUFF_SIZE, DMA_FROM_DEVICE);
-		if (dma_mapping_error(desc->data)) {
+		if (dma_mapping_error(&port->netdev->dev, desc->data)) {
 			free_buffer(buff);
 			return -EIO;
 		}
-- 
GitLab


From 13b2738cbb4b59f695bd72bcaabd71317e7731d2 Mon Sep 17 00:00:00 2001
From: Brice Goglin <brice@myri.com>
Date: Wed, 13 Aug 2008 21:05:52 +0200
Subject: [PATCH 046/869] myri10ge: myri10ge_fw_name also overrides the rss
 firmware

When myri10ge_fw_name is given, use it to override the rss firmware
name as well.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/myri10ge/myri10ge.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index f1de38f8b74..5d76cd09e24 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -3548,7 +3548,11 @@ static void myri10ge_probe_slices(struct myri10ge_priv *mgp)
 
 	/* try to load the slice aware rss firmware */
 	old_fw = mgp->fw_name;
-	if (old_fw == myri10ge_fw_aligned)
+	if (myri10ge_fw_name != NULL) {
+		dev_info(&mgp->pdev->dev, "overriding rss firmware to %s\n",
+			 myri10ge_fw_name);
+		mgp->fw_name = myri10ge_fw_name;
+	} else if (old_fw == myri10ge_fw_aligned)
 		mgp->fw_name = myri10ge_fw_rss_aligned;
 	else
 		mgp->fw_name = myri10ge_fw_rss_unaligned;
-- 
GitLab


From 2726fcf0dab1a9b1fd04dea3837b2b0bb639c1bd Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Wed, 6 Aug 2008 14:12:11 +0200
Subject: [PATCH 047/869] au1000_eth: use 'unsigned long' for irqflags

The patch was generated using the Coccinelle semantic patch framework.

Cc: Julia Lawall <julia@diku.dk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/au1000_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index cb8be490e5a..5ee1b0557a0 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -807,7 +807,7 @@ err_out:
 static int au1000_init(struct net_device *dev)
 {
 	struct au1000_private *aup = (struct au1000_private *) dev->priv;
-	u32 flags;
+	unsigned long flags;
 	int i;
 	u32 control;
 
-- 
GitLab


From e484d5f5c8c64e2c4f110c59e9e964884107822a Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sun, 10 Aug 2008 19:30:28 +0200
Subject: [PATCH 048/869] sky2: Fix suspend/hibernation/shutdown regression
 with WOL enabled (rev. 2)

On my test box with the Asus M3A32-MVP main board there is a
regression from 2.6.26 related to suspend, hibernation and
shutdown.  Namely, if Wake-on-LAN is enabled with
'ethtool -s eth0 wol g', the box hangs solid during all of these
operations, while executing either sky2_suspend(), or
sky2_shutdown().  This patch fixes it for me.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/sky2.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 06dfc950f33..e24b25ca1c6 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -665,11 +665,16 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
 
 	if (hw->chip_id != CHIP_ID_YUKON_EC) {
 		if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-			ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+			/* select page 2 to access MAC control register */
+			gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
 
+			ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
 			/* enable Power Down */
 			ctrl |= PHY_M_PC_POW_D_ENA;
 			gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+			/* set page register back to 0 */
+			gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
 		}
 
 		/* set IEEE compatible Power Down Mode (dev. #4.99) */
-- 
GitLab


From 0d63bea2c20651588e5e631799a961468a735eb9 Mon Sep 17 00:00:00 2001
From: Robert Fitzsimons <robfitz@273k.net>
Date: Sat, 9 Aug 2008 17:54:02 +0100
Subject: [PATCH 049/869] tlan: Fix two regressions introduced by 64bit
 conversion.

Two regressions were introduced by the recent tlan: 64bit conversion
commit (93e16847c9db0093065c98063cfc639cdfccf19a).  The first in
TLan_GetSKB caused a NULL pointer dereference.  With the second causing
the link to fail to come up.

Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/tlan.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 85246ed7cb9..ec871f64676 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -360,8 +360,8 @@ TLan_GetSKB( const struct tlan_list_tag *tag)
 {
 	unsigned long addr;
 
-	addr = tag->buffer[8].address;
-	addr |= (tag->buffer[9].address << 16) << 16;
+	addr = tag->buffer[9].address;
+	addr |= (tag->buffer[8].address << 16) << 16;
 	return (struct sk_buff *) addr;
 }
 
@@ -1984,7 +1984,6 @@ static void TLan_ResetLists( struct net_device *dev )
 	TLanList	*list;
 	dma_addr_t	list_phys;
 	struct sk_buff	*skb;
-	void		*t = NULL;
 
 	priv->txHead = 0;
 	priv->txTail = 0;
@@ -2022,7 +2021,8 @@ static void TLan_ResetLists( struct net_device *dev )
 			}
 
 			skb_reserve( skb, NET_IP_ALIGN );
-			list->buffer[0].address = pci_map_single(priv->pciDev, t,
+			list->buffer[0].address = pci_map_single(priv->pciDev,
+								 skb->data,
 								 TLAN_MAX_FRAME_SIZE,
 								 PCI_DMA_FROMDEVICE);
 			TLan_StoreSKB(list, skb);
-- 
GitLab


From 56e1f82968af79f70902008098a4687198142ce7 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Fri, 8 Aug 2008 18:35:44 -0700
Subject: [PATCH 050/869] e1000e: Return 1 instead of a non-zero value for link
 up indication

A number of users have mentioned they have tools that rely on a link-up
indication having a return value of 1 rather than a non-zero value.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000e/ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index cf9679f2b7c..e21c9e0f373 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -177,7 +177,7 @@ static u32 e1000_get_link(struct net_device *netdev)
 	u32 status;
 	
 	status = er32(STATUS);
-	return (status & E1000_STATUS_LU);
+	return (status & E1000_STATUS_LU) ? 1 : 0;
 }
 
 static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
-- 
GitLab


From 2d06cad1a5ceb3b04dc9547e261ad4fcebf7433d Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Fri, 8 Aug 2008 18:35:51 -0700
Subject: [PATCH 051/869] e1000e: Set InterruptThrottleRate to default when
 invalid value used

During module load, seting the InterruptThrottleRate parameter to an
invalid value would result in the itr/itr_setting pair being set to
unexpected values which would result in poor performance.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000e/param.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 8effc3107f9..b0499f27e5f 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -327,11 +327,26 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 				e1000_validate_option(&adapter->itr, &opt,
 					adapter);
 				/*
-				 * save the setting, because the dynamic bits
-				 * change itr. clear the lower two bits
-				 * because they are used as control
+				 * Save the setting, because the dynamic bits
+				 * change itr.
 				 */
-				adapter->itr_setting = adapter->itr & ~3;
+				if (e1000_validate_option(&adapter->itr, &opt,
+							  adapter) &&
+				    (adapter->itr == 3)) {
+					/*
+					 * In case of invalid user value,
+					 * default to conservative mode.
+					 */
+					adapter->itr_setting = adapter->itr;
+					adapter->itr = 20000;
+				} else {
+					/*
+					 * Clear the lower two bits because
+					 * they are used as control.
+					 */
+					adapter->itr_setting =
+						adapter->itr & ~3;
+				}
 				break;
 			}
 		} else {
-- 
GitLab


From 808ff676c46d8e259c2cb38579f94f8e6ae38009 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Fri, 8 Aug 2008 18:35:56 -0700
Subject: [PATCH 052/869] e1000e: Use skb_copy_to_linear_data_offset introduced
 in 2.6.22

The e1000e driver was based on a version of e1000 prior to acme's
introduction of skb_copy_to_linear_data_offset, and was submitted
after acme went through and coverted all the drivers to use it.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000e/netdev.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 05b0b2f9c54..efa944509a3 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -510,9 +510,12 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
 			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
 			if (new_skb) {
 				skb_reserve(new_skb, NET_IP_ALIGN);
-				memcpy(new_skb->data - NET_IP_ALIGN,
-				       skb->data - NET_IP_ALIGN,
-				       length + NET_IP_ALIGN);
+				skb_copy_to_linear_data_offset(new_skb,
+							       -NET_IP_ALIGN,
+							       (skb->data -
+								NET_IP_ALIGN),
+							       (length +
+								NET_IP_ALIGN));
 				/* save the skb in buffer_info as good */
 				buffer_info->skb = skb;
 				skb = new_skb;
-- 
GitLab


From 10f1b492135620a87970cad9f80439249dcce299 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Fri, 8 Aug 2008 18:36:01 -0700
Subject: [PATCH 053/869] e1000e: Increase Tx timeout factor for 10Mbps

Prevent Tx hangs from happening on 10Mb flood ping by increasing the
timeout factor.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000e/netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index efa944509a3..4573c7b9cbd 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3058,7 +3058,7 @@ static void e1000_watchdog_task(struct work_struct *work)
 			case SPEED_10:
 				txb2b = 0;
 				netdev->tx_queue_len = 10;
-				adapter->tx_timeout_factor = 14;
+				adapter->tx_timeout_factor = 16;
 				break;
 			case SPEED_100:
 				txb2b = 0;
-- 
GitLab


From d53f706da808e6d93dc60b1910233a309009939f Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Fri, 8 Aug 2008 18:36:06 -0700
Subject: [PATCH 054/869] e1000e: increase minimum frame size allowed

Setting an MTU value below 68 was disabling the network connection and
would not reconnect until the driver was reloaded.  Prevent changing the
MTU to anything below 68.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000e/netdev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 4573c7b9cbd..b8b26cf78de 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -3724,7 +3724,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
 
-	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
+	if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
 	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
 		e_err("Invalid MTU setting\n");
 		return -EINVAL;
-- 
GitLab


From f8d59f7826aa73c5e7682fbed6db38020635d466 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Fri, 8 Aug 2008 18:36:11 -0700
Subject: [PATCH 055/869] e1000e: test for unusable MSI support

Some systems do not like 82571/2 use of 16-bit MSI messages and some
other systems claim to support MSI, but neither really works.  Setup a
test MSI handler to detect whether or not MSI is working properly, and
if not, fallback to legacy INTx interrupts.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000e/defines.h |   2 +-
 drivers/net/e1000e/e1000.h   |   1 +
 drivers/net/e1000e/netdev.c  | 172 +++++++++++++++++++++++++++++++++--
 3 files changed, 164 insertions(+), 11 deletions(-)

diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index f823b8ba578..14b0e6cd3b8 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -389,7 +389,7 @@
 
 /* Interrupt Cause Set */
 #define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */
-#define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
+#define E1000_ICS_RXSEQ     E1000_ICR_RXSEQ     /* Rx sequence error */
 #define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* Rx desc min. threshold */
 
 /* Transmit Descriptor Control */
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index cf57050d99d..ac4e506b4f8 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -326,6 +326,7 @@ struct e1000_info {
 #define FLAG_RX_CSUM_ENABLED              (1 << 28)
 #define FLAG_TSO_FORCE                    (1 << 29)
 #define FLAG_RX_RESTART_NOW               (1 << 30)
+#define FLAG_MSI_TEST_FAILED              (1 << 31)
 
 #define E1000_RX_DESC_PS(R, i)	    \
 	(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index b8b26cf78de..d266510c8a9 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -1236,26 +1236,36 @@ static irqreturn_t e1000_intr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+/**
+ * e1000_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
 static int e1000_request_irq(struct e1000_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
-	irq_handler_t handler = e1000_intr;
 	int irq_flags = IRQF_SHARED;
 	int err;
 
-	if (!pci_enable_msi(adapter->pdev)) {
-		adapter->flags |= FLAG_MSI_ENABLED;
-		handler = e1000_intr_msi;
-		irq_flags = 0;
+	if (!(adapter->flags & FLAG_MSI_TEST_FAILED)) {
+		err = pci_enable_msi(adapter->pdev);
+		if (!err) {
+			adapter->flags |= FLAG_MSI_ENABLED;
+			irq_flags = 0;
+		}
 	}
 
-	err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
-			  netdev);
+	err = request_irq(adapter->pdev->irq,
+			  ((adapter->flags & FLAG_MSI_ENABLED) ?
+				&e1000_intr_msi : &e1000_intr),
+			  irq_flags, netdev->name, netdev);
 	if (err) {
-		e_err("Unable to allocate %s interrupt (return: %d)\n",
-		      adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx",	err);
-		if (adapter->flags & FLAG_MSI_ENABLED)
+		if (adapter->flags & FLAG_MSI_ENABLED) {
 			pci_disable_msi(adapter->pdev);
+			adapter->flags &= ~FLAG_MSI_ENABLED;
+		}
+		e_err("Unable to allocate interrupt, Error: %d\n", err);
 	}
 
 	return err;
@@ -2594,6 +2604,135 @@ err:
 	return -ENOMEM;
 }
 
+/**
+ * e1000_intr_msi_test - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr_msi_test(int irq, void *data)
+{
+	struct net_device *netdev = data;
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u32 icr = er32(ICR);
+
+	e_dbg("%s: icr is %08X\n", netdev->name, icr);
+	if (icr & E1000_ICR_RXSEQ) {
+		adapter->flags &= ~FLAG_MSI_TEST_FAILED;
+		wmb();
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * e1000_test_msi_interrupt - Returns 0 for successful test
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c
+ **/
+static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
+{
+	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
+	int err;
+
+	/* poll_enable hasn't been called yet, so don't need disable */
+	/* clear any pending events */
+	er32(ICR);
+
+	/* free the real vector and request a test handler */
+	e1000_free_irq(adapter);
+
+	/* Assume that the test fails, if it succeeds then the test
+	 * MSI irq handler will unset this flag */
+	adapter->flags |= FLAG_MSI_TEST_FAILED;
+
+	err = pci_enable_msi(adapter->pdev);
+	if (err)
+		goto msi_test_failed;
+
+	err = request_irq(adapter->pdev->irq, &e1000_intr_msi_test, 0,
+			  netdev->name, netdev);
+	if (err) {
+		pci_disable_msi(adapter->pdev);
+		goto msi_test_failed;
+	}
+
+	wmb();
+
+	e1000_irq_enable(adapter);
+
+	/* fire an unusual interrupt on the test handler */
+	ew32(ICS, E1000_ICS_RXSEQ);
+	e1e_flush();
+	msleep(50);
+
+	e1000_irq_disable(adapter);
+
+	rmb();
+
+	if (adapter->flags & FLAG_MSI_TEST_FAILED) {
+		err = -EIO;
+		e_info("MSI interrupt test failed!\n");
+	}
+
+	free_irq(adapter->pdev->irq, netdev);
+	pci_disable_msi(adapter->pdev);
+
+	if (err == -EIO)
+		goto msi_test_failed;
+
+	/* okay so the test worked, restore settings */
+	e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name);
+msi_test_failed:
+	/* restore the original vector, even if it failed */
+	e1000_request_irq(adapter);
+	return err;
+}
+
+/**
+ * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c, called with e1000 interrupts disabled.
+ **/
+static int e1000_test_msi(struct e1000_adapter *adapter)
+{
+	int err;
+	u16 pci_cmd;
+
+	if (!(adapter->flags & FLAG_MSI_ENABLED))
+		return 0;
+
+	/* disable SERR in case the MSI write causes a master abort */
+	pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+	pci_write_config_word(adapter->pdev, PCI_COMMAND,
+			      pci_cmd & ~PCI_COMMAND_SERR);
+
+	err = e1000_test_msi_interrupt(adapter);
+
+	/* restore previous setting of command word */
+	pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
+
+	/* success ! */
+	if (!err)
+		return 0;
+
+	/* EIO means MSI test failed */
+	if (err != -EIO)
+		return err;
+
+	/* back to INTx mode */
+	e_warn("MSI interrupt test failed, using legacy interrupt.\n");
+
+	e1000_free_irq(adapter);
+
+	err = e1000_request_irq(adapter);
+
+	return err;
+}
+
 /**
  * e1000_open - Called when a network interface is made active
  * @netdev: network interface device structure
@@ -2652,6 +2791,19 @@ static int e1000_open(struct net_device *netdev)
 	if (err)
 		goto err_req_irq;
 
+	/*
+	 * Work around PCIe errata with MSI interrupts causing some chipsets to
+	 * ignore e1000e MSI messages, which means we need to test our MSI
+	 * interrupt now
+	 */
+	{
+		err = e1000_test_msi(adapter);
+		if (err) {
+			e_err("Interrupt allocation failed\n");
+			goto err_req_irq;
+		}
+	}
+
 	/* From here on the code is the same as e1000e_up() */
 	clear_bit(__E1000_DOWN, &adapter->state);
 
-- 
GitLab


From 05c550babecfc129a8d9331edf43107192bae115 Mon Sep 17 00:00:00 2001
From: Bruce Allan <bruce.w.allan@intel.com>
Date: Fri, 8 Aug 2008 18:36:16 -0700
Subject: [PATCH 056/869] e1000e: remove unnecessary snippet missed in prior
 check_options update

The removal of this bit of code was missed in an earlier patch submittal.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e1000e/param.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index b0499f27e5f..ed912e023a7 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -324,8 +324,6 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 				adapter->itr = 20000;
 				break;
 			default:
-				e1000_validate_option(&adapter->itr, &opt,
-					adapter);
 				/*
 				 * Save the setting, because the dynamic bits
 				 * change itr.
-- 
GitLab


From 8d792cd990938c4d06b86141465ff8d52a946a0a Mon Sep 17 00:00:00 2001
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Date: Fri, 8 Aug 2008 16:24:19 -0700
Subject: [PATCH 057/869] ixgbe: add cx4 device ID

This is a simple device ID add for adapters that support
CX4 (copper infiniband style cable) connectors for 10GbE.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/ixgbe/ixgbe_82598.c | 1 +
 drivers/net/ixgbe/ixgbe_main.c  | 4 +++-
 drivers/net/ixgbe/ixgbe_type.h  | 1 +
 3 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 2f38e847e2c..f96358b641a 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -190,6 +190,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
 	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
 	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
 	case IXGBE_DEV_ID_82598EB_CX4:
+	case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
 		media_type = ixgbe_media_type_fiber;
 		break;
 	case IXGBE_DEV_ID_82598AT_DUAL_PORT:
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e5f3da8468c..34bca16d48a 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -48,7 +48,7 @@ char ixgbe_driver_name[] = "ixgbe";
 static const char ixgbe_driver_string[] =
 	"Intel(R) 10 Gigabit PCI Express Network Driver";
 
-#define DRV_VERSION "1.3.18-k2"
+#define DRV_VERSION "1.3.18-k4"
 const char ixgbe_driver_version[] = DRV_VERSION;
 static const char ixgbe_copyright[] =
 	 "Copyright (c) 1999-2007 Intel Corporation.";
@@ -72,6 +72,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
 	 board_82598 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4),
 	 board_82598 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT),
+	 board_82598 },
 
 	/* required last entry */
 	{0, }
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 1ad7cb9c25a..c0282a223df 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -39,6 +39,7 @@
 #define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
 #define IXGBE_DEV_ID_82598AT_DUAL_PORT   0x10C8
 #define IXGBE_DEV_ID_82598EB_CX4         0x10DD
+#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
 
 /* General Registers */
 #define IXGBE_CTRL      0x00000
-- 
GitLab


From 9dc28efeee98a4f81d5469d3576f55c5e6d1a5db Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Fri, 8 Aug 2008 00:08:39 -0700
Subject: [PATCH 058/869] netxen: fix mac addr setup

For NX3031 mac addr should be read from firmware. mac addr in flash
is still valid, but can be overridden by firmware if running in
virtualization environment.

For old revisions, mac addr is retrieved directly from flash.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h          |  3 +-
 drivers/net/netxen/netxen_nic_hw.c       | 51 ++++++++++++++-----
 drivers/net/netxen/netxen_nic_main.c     | 65 +++++++++++++++---------
 drivers/net/netxen/netxen_nic_phan_reg.h |  2 +
 4 files changed, 83 insertions(+), 38 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 93a7b9b668d..2cf6e41291e 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -1615,7 +1615,8 @@ dma_watchdog_wakeup(struct netxen_adapter *adapter)
 
 
 int netxen_is_flash_supported(struct netxen_adapter *adapter);
-int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 mac[]);
+int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
+int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac);
 extern void netxen_change_ringparam(struct netxen_adapter *adapter);
 extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr,
 				int *valp);
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 9aa20f96161..f5db48bcd26 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -733,31 +733,56 @@ static int netxen_get_flash_block(struct netxen_adapter *adapter, int base,
 	return 0;
 }
 
-int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 mac[])
+int netxen_get_flash_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
 {
-	__le32 *pmac = (__le32 *) & mac[0];
+	__le32 *pmac = (__le32 *) mac;
+	u32 offset;
 
-	if (netxen_get_flash_block(adapter,
-				   NETXEN_USER_START +
-				   offsetof(struct netxen_new_user_info,
-					    mac_addr),
-				   FLASH_NUM_PORTS * sizeof(u64), pmac) == -1) {
+	offset = NETXEN_USER_START +
+		offsetof(struct netxen_new_user_info, mac_addr) +
+		adapter->portnum * sizeof(u64);
+
+	if (netxen_get_flash_block(adapter, offset, sizeof(u64), pmac) == -1)
 		return -1;
-	}
+
 	if (*mac == cpu_to_le64(~0ULL)) {
+
+		offset = NETXEN_USER_START_OLD +
+			offsetof(struct netxen_user_old_info, mac_addr) +
+			adapter->portnum * sizeof(u64);
+
 		if (netxen_get_flash_block(adapter,
-					   NETXEN_USER_START_OLD +
-					   offsetof(struct netxen_user_old_info,
-						    mac_addr),
-					   FLASH_NUM_PORTS * sizeof(u64),
-					   pmac) == -1)
+					offset, sizeof(u64), pmac) == -1)
 			return -1;
+
 		if (*mac == cpu_to_le64(~0ULL))
 			return -1;
 	}
 	return 0;
 }
 
+int netxen_p3_get_mac_addr(struct netxen_adapter *adapter, __le64 *mac)
+{
+	uint32_t crbaddr, mac_hi, mac_lo;
+	int pci_func = adapter->ahw.pci_func;
+
+	crbaddr = CRB_MAC_BLOCK_START +
+		(4 * ((pci_func/2) * 3)) + (4 * (pci_func & 1));
+
+	adapter->hw_read_wx(adapter, crbaddr, &mac_lo, 4);
+	adapter->hw_read_wx(adapter, crbaddr+4, &mac_hi, 4);
+
+	mac_hi = cpu_to_le32(mac_hi);
+	mac_lo = cpu_to_le32(mac_lo);
+
+	if (pci_func & 1)
+		*mac = ((mac_lo >> 16) | ((u64)mac_hi << 16));
+	else
+		*mac = ((mac_lo) | ((u64)mac_hi << 32));
+
+	return 0;
+}
+
 #define CRB_WIN_LOCK_TIMEOUT 100000000
 
 static int crb_win_lock(struct netxen_adapter *adapter)
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 7615c715e66..6fc42cd3072 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -501,6 +501,44 @@ static void netxen_init_msix_entries(struct netxen_adapter *adapter)
 		adapter->msix_entries[i].entry = i;
 }
 
+static int
+netxen_read_mac_addr(struct netxen_adapter *adapter)
+{
+	int i;
+	unsigned char *p;
+	__le64 mac_addr;
+	DECLARE_MAC_BUF(mac);
+	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
+
+	if (netxen_is_flash_supported(adapter) != 0)
+		return -EIO;
+
+	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		if (netxen_p3_get_mac_addr(adapter, &mac_addr) != 0)
+			return -EIO;
+	} else {
+		if (netxen_get_flash_mac_addr(adapter, &mac_addr) != 0)
+			return -EIO;
+	}
+
+	p = (unsigned char *)&mac_addr;
+	for (i = 0; i < 6; i++)
+		netdev->dev_addr[i] = *(p + 5 - i);
+
+	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+
+	/* set station address */
+
+	if (!is_valid_ether_addr(netdev->perm_addr)) {
+		dev_warn(&pdev->dev, "Bad MAC address %s.\n",
+				print_mac(mac, netdev->dev_addr));
+	} else
+		adapter->macaddr_set(adapter, netdev->dev_addr);
+
+	return 0;
+}
+
 /*
  * netxen_nic_probe()
  *
@@ -529,10 +567,8 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	unsigned long mem_base, mem_len, db_base, db_len, pci_len0 = 0;
 	int i = 0, err;
 	int first_driver, first_boot;
-	__le64 mac_addr[FLASH_NUM_PORTS + 1];
 	u32 val;
 	int pci_func_id = PCI_FUNC(pdev->devfn);
-	DECLARE_MAC_BUF(mac);
 	struct netxen_legacy_intr_set *legacy_intrp;
 	uint8_t revision_id;
 
@@ -904,28 +940,9 @@ request_msi:
 	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
 	INIT_WORK(&adapter->tx_timeout_task, netxen_tx_timeout_task);
 
-	if (netxen_is_flash_supported(adapter) == 0 &&
-			netxen_get_flash_mac_addr(adapter, mac_addr) == 0) {
-		unsigned char *p;
-
-		p = (unsigned char *)&mac_addr[adapter->portnum];
-		netdev->dev_addr[0] = *(p + 5);
-		netdev->dev_addr[1] = *(p + 4);
-		netdev->dev_addr[2] = *(p + 3);
-		netdev->dev_addr[3] = *(p + 2);
-		netdev->dev_addr[4] = *(p + 1);
-		netdev->dev_addr[5] = *(p + 0);
-
-		memcpy(netdev->perm_addr, netdev->dev_addr,
-			netdev->addr_len);
-		if (!is_valid_ether_addr(netdev->perm_addr)) {
-			printk(KERN_ERR "%s: Bad MAC address %s.\n",
-					netxen_nic_driver_name,
-					print_mac(mac, netdev->dev_addr));
-		} else {
-			adapter->macaddr_set(adapter, netdev->dev_addr);
-		}
-	}
+	err = netxen_read_mac_addr(adapter);
+	if (err)
+		dev_warn(&pdev->dev, "failed to read mac addr\n");
 
 	netif_carrier_off(netdev);
 	netif_stop_queue(netdev);
diff --git a/drivers/net/netxen/netxen_nic_phan_reg.h b/drivers/net/netxen/netxen_nic_phan_reg.h
index 83e5ee57bfe..b293adcc95a 100644
--- a/drivers/net/netxen/netxen_nic_phan_reg.h
+++ b/drivers/net/netxen/netxen_nic_phan_reg.h
@@ -125,6 +125,8 @@
 #define CRB_SW_INT_MASK_2	   NETXEN_NIC_REG(0x1e4)
 #define CRB_SW_INT_MASK_3	   NETXEN_NIC_REG(0x1e8)
 
+#define CRB_MAC_BLOCK_START        NETXEN_CAM_RAM(0x1c0)
+
 /*
  * capabilities register, can be used to selectively enable/disable features
  * for backward compability
-- 
GitLab


From 9e410778047d0f2887adb888b44eda4d72d4f67d Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Fri, 8 Aug 2008 00:08:40 -0700
Subject: [PATCH 059/869] netxen: fix rxbuf leak across driver reload

Free up rx ring during driver unload or open() failure.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic_main.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 6fc42cd3072..056f6b17a33 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1017,6 +1017,7 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev)
 
 	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
 		netxen_free_hw_resources(adapter);
+		netxen_release_rx_buffers(adapter);
 		netxen_free_sw_resources(adapter);
 	}
 
@@ -1111,7 +1112,7 @@ static int netxen_nic_open(struct net_device *netdev)
 				  flags, netdev->name, adapter);
 		if (err) {
 			printk(KERN_ERR "request_irq failed with: %d\n", err);
-			goto err_out_free_hw;
+			goto err_out_free_rxbuf;
 		}
 
 		adapter->is_up = NETXEN_ADAPTER_UP_MAGIC;
@@ -1144,7 +1145,8 @@ static int netxen_nic_open(struct net_device *netdev)
 
 err_out_free_irq:
 	free_irq(adapter->irq, adapter);
-err_out_free_hw:
+err_out_free_rxbuf:
+	netxen_release_rx_buffers(adapter);
 	netxen_free_hw_resources(adapter);
 err_out_free_sw:
 	netxen_free_sw_resources(adapter);
-- 
GitLab


From 922c4f2c70c156ac38b4e6affbd30d4b1efd5864 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Fri, 8 Aug 2008 00:08:41 -0700
Subject: [PATCH 060/869] netxen: force link update across ifdown/ifup

Re-read link status in dev open(). Schedule link watchdog only
if dev is up.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic_main.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 056f6b17a33..f69807c9432 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -934,7 +934,6 @@ request_msi:
 		goto err_out_disable_msi;
 
 	init_timer(&adapter->watchdog_timer);
-	adapter->ahw.linkup = 0;
 	adapter->watchdog_timer.function = &netxen_watchdog;
 	adapter->watchdog_timer.data = (unsigned long)adapter;
 	INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
@@ -1134,6 +1133,7 @@ static int netxen_nic_open(struct net_device *netdev)
 	if (adapter->set_mtu)
 		adapter->set_mtu(adapter, netdev->mtu);
 
+	adapter->ahw.linkup = 0;
 	mod_timer(&adapter->watchdog_timer, jiffies);
 
 	napi_enable(&adapter->napi);
@@ -1171,10 +1171,8 @@ static int netxen_nic_close(struct net_device *netdev)
 
 	netxen_release_tx_buffers(adapter);
 
-	if (adapter->is_up == NETXEN_ADAPTER_UP_MAGIC) {
-		FLUSH_SCHEDULED_WORK();
-		del_timer_sync(&adapter->watchdog_timer);
-	}
+	FLUSH_SCHEDULED_WORK();
+	del_timer_sync(&adapter->watchdog_timer);
 
 	return 0;
 }
@@ -1477,7 +1475,8 @@ void netxen_watchdog_task(struct work_struct *work)
 
 	netxen_nic_handle_phy_intr(adapter);
 
-	mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+	if (netif_running(adapter->netdev))
+		mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
 }
 
 static void netxen_tx_timeout(struct net_device *netdev)
-- 
GitLab


From 15eef1e1b718667981da92d2fa18283f181c117c Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Fri, 8 Aug 2008 00:08:42 -0700
Subject: [PATCH 061/869] netxen: fix dma watchdog

NX3031 does not require driver to kill dma watchdog.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic_init.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 519fc860e17..5bba675d050 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -1079,10 +1079,12 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter)
 
 void netxen_free_adapter_offload(struct netxen_adapter *adapter)
 {
-	int i;
+	int i = 100;
+
+	if (!adapter->dummy_dma.addr)
+		return;
 
-	if (adapter->dummy_dma.addr) {
-		i = 100;
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
 		do {
 			if (dma_watchdog_shutdown_request(adapter) == 1)
 				break;
@@ -1090,17 +1092,17 @@ void netxen_free_adapter_offload(struct netxen_adapter *adapter)
 			if (dma_watchdog_shutdown_poll_result(adapter) == 1)
 				break;
 		} while (--i);
+	}
 
-		if (i) {
-			pci_free_consistent(adapter->pdev,
-				    NETXEN_HOST_DUMMY_DMA_SIZE,
-				    adapter->dummy_dma.addr,
-				    adapter->dummy_dma.phys_addr);
-			adapter->dummy_dma.addr = NULL;
-		} else {
-			printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
-					adapter->netdev->name);
-		}
+	if (i) {
+		pci_free_consistent(adapter->pdev,
+			    NETXEN_HOST_DUMMY_DMA_SIZE,
+			    adapter->dummy_dma.addr,
+			    adapter->dummy_dma.phys_addr);
+		adapter->dummy_dma.addr = NULL;
+	} else {
+		printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n",
+				adapter->netdev->name);
 	}
 }
 
-- 
GitLab


From 092bc57184842229ee41f87d9c408a3f1302aaa6 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Fri, 8 Aug 2008 00:08:43 -0700
Subject: [PATCH 062/869] netxen: cleanup interrupt code

Mark interrupt scheme in very old firmware incompatible. Interrupt mask
and status registers are per pci function / port.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic_main.c | 123 +++++++++------------------
 1 file changed, 40 insertions(+), 83 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index f69807c9432..3c424a88d8f 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -149,76 +149,18 @@ static uint32_t msi_tgt_status[8] = {
 
 static struct netxen_legacy_intr_set legacy_intr[] = NX_LEGACY_INTR_CONFIG;
 
-static void netxen_nic_disable_int(struct netxen_adapter *adapter)
+static inline void netxen_nic_disable_int(struct netxen_adapter *adapter)
 {
-	u32 mask = 0x7ff;
-	int retries = 32;
-	int pci_fn = adapter->ahw.pci_func;
-
-	if (adapter->msi_mode != MSI_MODE_MULTIFUNC)
-		adapter->pci_write_normalize(adapter,
-				adapter->crb_intr_mask, 0);
-
-	if (adapter->intr_scheme != -1 &&
-	    adapter->intr_scheme != INTR_SCHEME_PERPORT)
-		adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
-
-	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
-		do {
-			adapter->pci_write_immediate(adapter,
-					adapter->legacy_intr.tgt_status_reg,
-					0xffffffff);
-			mask = adapter->pci_read_immediate(adapter,
-					ISR_INT_VECTOR);
-			if (!(mask & 0x80))
-				break;
-			udelay(10);
-		} while (--retries);
-
-		if (!retries) {
-			printk(KERN_NOTICE "%s: Failed to disable interrupt\n",
-					netxen_nic_driver_name);
-		}
-	} else {
-		if (adapter->msi_mode == MSI_MODE_MULTIFUNC) {
-			adapter->pci_write_immediate(adapter,
-					msi_tgt_status[pci_fn], 0xffffffff);
-		}
-	}
+	adapter->pci_write_normalize(adapter, adapter->crb_intr_mask, 0);
 }
 
-static void netxen_nic_enable_int(struct netxen_adapter *adapter)
+static inline void netxen_nic_enable_int(struct netxen_adapter *adapter)
 {
-	u32 mask;
-
-	if (adapter->intr_scheme != -1 &&
-		adapter->intr_scheme != INTR_SCHEME_PERPORT) {
-		switch (adapter->ahw.board_type) {
-		case NETXEN_NIC_GBE:
-			mask  =  0x77b;
-			break;
-		case NETXEN_NIC_XGBE:
-			mask  =  0x77f;
-			break;
-		default:
-			mask  =  0x7ff;
-			break;
-		}
-
-		adapter->pci_write_immediate(adapter, ISR_INT_MASK, mask);
-	}
-
 	adapter->pci_write_normalize(adapter, adapter->crb_intr_mask, 0x1);
 
-	if (!NETXEN_IS_MSI_FAMILY(adapter)) {
-		mask = 0xbff;
-		if (adapter->intr_scheme == INTR_SCHEME_PERPORT)
-			adapter->pci_write_immediate(adapter,
-				adapter->legacy_intr.tgt_mask_reg, mask);
-		else
-			adapter->pci_write_normalize(adapter,
-					CRB_INT_VECTOR, 0);
-	}
+	if (!NETXEN_IS_MSI_FAMILY(adapter))
+		adapter->pci_write_immediate(adapter,
+				adapter->legacy_intr.tgt_mask_reg, 0xfbff);
 }
 
 static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
@@ -1086,6 +1028,15 @@ static int netxen_nic_open(struct net_device *netdev)
 			goto err_out_free_sw;
 		}
 
+		if ((adapter->msi_mode != MSI_MODE_MULTIFUNC) ||
+			(adapter->intr_scheme != INTR_SCHEME_PERPORT)) {
+			printk(KERN_ERR "%s: Firmware interrupt scheme is "
+					"incompatible with driver\n",
+					netdev->name);
+			adapter->driver_mismatch = 1;
+			goto err_out_free_hw;
+		}
+
 		if (adapter->fw_major < 4) {
 			adapter->crb_addr_cmd_producer =
 				crb_cmd_producer[adapter->portnum];
@@ -1147,6 +1098,7 @@ err_out_free_irq:
 	free_irq(adapter->irq, adapter);
 err_out_free_rxbuf:
 	netxen_release_rx_buffers(adapter);
+err_out_free_hw:
 	netxen_free_hw_resources(adapter);
 err_out_free_sw:
 	netxen_free_sw_resources(adapter);
@@ -1536,18 +1488,9 @@ struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
 	return stats;
 }
 
-static inline void
-netxen_handle_int(struct netxen_adapter *adapter)
-{
-	netxen_nic_disable_int(adapter);
-	napi_schedule(&adapter->napi);
-}
-
 static irqreturn_t netxen_intr(int irq, void *data)
 {
 	struct netxen_adapter *adapter = data;
-	u32 our_int = 0;
-
 	u32 status = 0;
 
 	status = adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
@@ -1562,22 +1505,32 @@ static irqreturn_t netxen_intr(int irq, void *data)
 		if (!ISR_LEGACY_INT_TRIGGERED(status))
 			return IRQ_NONE;
 
-	} else if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
+	} else {
+		unsigned long our_int = 0;
 
 		our_int = adapter->pci_read_normalize(adapter, CRB_INT_VECTOR);
+
 		/* not our interrupt */
-		if ((our_int & (0x80 << adapter->portnum)) == 0)
+		if (!test_and_clear_bit((7 + adapter->portnum), &our_int))
 			return IRQ_NONE;
 
-		if (adapter->intr_scheme == INTR_SCHEME_PERPORT) {
-			/* claim interrupt */
-			adapter->pci_write_normalize(adapter,
-				CRB_INT_VECTOR,
-				our_int & ~((u32)(0x80 << adapter->portnum)));
-		}
+		/* claim interrupt */
+		adapter->pci_write_normalize(adapter,
+				CRB_INT_VECTOR, (our_int & 0xffffffff));
 	}
 
-	netxen_handle_int(adapter);
+	/* clear interrupt */
+	if (adapter->fw_major < 4)
+		netxen_nic_disable_int(adapter);
+
+	adapter->pci_write_immediate(adapter,
+			adapter->legacy_intr.tgt_status_reg,
+			0xffffffff);
+	/* read twice to ensure write is flushed */
+	adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+	adapter->pci_read_immediate(adapter, ISR_INT_VECTOR);
+
+	napi_schedule(&adapter->napi);
 
 	return IRQ_HANDLED;
 }
@@ -1586,7 +1539,11 @@ static irqreturn_t netxen_msi_intr(int irq, void *data)
 {
 	struct netxen_adapter *adapter = data;
 
-	netxen_handle_int(adapter);
+	/* clear interrupt */
+	adapter->pci_write_immediate(adapter,
+			msi_tgt_status[adapter->ahw.pci_func], 0xffffffff);
+
+	napi_schedule(&adapter->napi);
 	return IRQ_HANDLED;
 }
 
-- 
GitLab


From 11d89d639352ef27bb3f0e7513dd406284bf034a Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Fri, 8 Aug 2008 00:08:45 -0700
Subject: [PATCH 063/869] netxen: update driver version

Raise driver version to 4.0.11.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic.h      | 4 ++--
 drivers/net/netxen/netxen_nic_hw.c   | 8 ++++----
 drivers/net/netxen/netxen_nic_main.c | 7 +++++++
 3 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 2cf6e41291e..ab871df6b1d 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -66,8 +66,8 @@
 
 #define _NETXEN_NIC_LINUX_MAJOR 4
 #define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 0
-#define NETXEN_NIC_LINUX_VERSIONID  "4.0.0"
+#define _NETXEN_NIC_LINUX_SUBVERSION 11
+#define NETXEN_NIC_LINUX_VERSIONID  "4.0.11"
 
 #define NETXEN_VERSION_CODE(a, b, c)	(((a) << 16) + ((b) << 8) + (c))
 
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index f5db48bcd26..84978f80f39 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -2208,10 +2208,10 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
 	if (adapter->portnum == 0) {
 		get_brd_name_by_type(board_info->board_type, brd_name);
 
-		printk("NetXen %s Board S/N %s  Chip id 0x%x\n",
-				brd_name, serial_num, board_info->chip_id);
-		printk("NetXen Firmware version %d.%d.%d\n", fw_major,
-				fw_minor, fw_build);
+		printk(KERN_INFO "NetXen %s Board S/N %s  Chip rev 0x%x\n",
+				brd_name, serial_num, adapter->ahw.revision_id);
+		printk(KERN_INFO "NetXen Firmware version %d.%d.%d\n",
+				fw_major, fw_minor, fw_build);
 	}
 
 	if (NETXEN_VERSION_CODE(fw_major, fw_minor, fw_build) <
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 3c424a88d8f..32bb47adbe3 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -523,6 +523,13 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -ENODEV;
 	}
 
+	if (pdev->revision >= NX_P3_A0 && pdev->revision < NX_P3_B1) {
+		printk(KERN_WARNING "NetXen chip revisions between 0x%x-0x%x"
+				"will not be enabled.\n",
+				NX_P3_A0, NX_P3_B1);
+		return -ENODEV;
+	}
+
 	if ((err = pci_enable_device(pdev)))
 		return err;
 
-- 
GitLab


From 1595ab5d7d99bc6c9a5548ab3fb83e278eeae409 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 8 Aug 2008 21:33:34 +0300
Subject: [PATCH 064/869] [netdrvr] uninline atl1e_setup_mac_ctrl()

There doesn't seem to be a compelling reason why atl1e_setup_mac_ctrl()
is marked as "inline":

It's not used in any place where speed would matter much, and as long as
it has only one caller non-ancient gcc versions anyway inline it
automatically.

This patch fixes the following compile error with gcc 3.4:

<--  snip  -->

...
  CC      drivers/net/atl1e/atl1e_main.o
atl1e_main.c: In function `atl1e_check_link':
atl1e_main.c:50: sorry, unimplemented: inlining failed in call to
atl1e_main.c:196: sorry, unimplemented: called from here
make[4]: *** [drivers/net/atl1e/atl1e_main.o] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/atl1e/atl1e_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 35264c244cf..82d7be1655d 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -47,7 +47,7 @@ MODULE_DESCRIPTION("Atheros 1000M Ethernet Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
-static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter);
+static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter);
 
 static const u16
 atl1e_rx_page_vld_regs[AT_MAX_RECEIVE_QUEUE][AT_PAGE_NUM_PER_QUEUE] =
@@ -1037,7 +1037,7 @@ static inline void atl1e_configure_dma(struct atl1e_adapter *adapter)
 	return;
 }
 
-static inline void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
+static void atl1e_setup_mac_ctrl(struct atl1e_adapter *adapter)
 {
 	u32 value;
 	struct atl1e_hw *hw = &adapter->hw;
-- 
GitLab


From add477df674db00377d9a4dc0d9b553ce79bc06d Mon Sep 17 00:00:00 2001
From: Olivier Blin <blino@mandriva.com>
Date: Fri, 8 Aug 2008 12:01:11 -0700
Subject: [PATCH 065/869] hso: fix oops in read/write callbacks

The tty may be closed already when the read/write callbacks are called.
This patch checks that the ttys still exist before waking them up.

Signed-off-by: Olivier Blin <blino@mandriva.com>
Acked-by: Alan Cox <alan@redhat.com>
Cc: Jari Tenhunen <jari.tenhunen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/hso.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 031d07b105a..94a27f764e6 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1467,7 +1467,8 @@ static void hso_std_serial_write_bulk_callback(struct urb *urb)
 		return;
 	}
 	hso_put_activity(serial->parent);
-	tty_wakeup(serial->tty);
+	if (serial->tty)
+		tty_wakeup(serial->tty);
 	hso_kick_transmit(serial);
 
 	D1(" ");
@@ -1538,7 +1539,8 @@ static void ctrl_callback(struct urb *urb)
 			clear_bit(HSO_SERIAL_FLAG_RX_SENT, &serial->flags);
 	} else {
 		hso_put_activity(serial->parent);
-		tty_wakeup(serial->tty);
+		if (serial->tty)
+			tty_wakeup(serial->tty);
 		/* response to a write command */
 		hso_kick_transmit(serial);
 	}
-- 
GitLab


From 6d558a52ba295fc1c281c671d7daab2f74ddb4f2 Mon Sep 17 00:00:00 2001
From: Olivier Blin <blino@mandriva.com>
Date: Fri, 8 Aug 2008 12:01:41 -0700
Subject: [PATCH 066/869] hso: fix refcounting on the ttyHSx devices

The references on ttyHSx devices were not decremented correctly when
the tty was closed. The helper freeing the serial devices was never
called because of that, and the module left some dangling sysfs
devices after being unloaded.

Signed-off-by: Olivier Blin <blino@mandriva.com>
Cc: Jari Tenhunen <jari.tenhunen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/hso.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 94a27f764e6..94c41bbedee 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1103,8 +1103,8 @@ static void hso_serial_close(struct tty_struct *tty, struct file *filp)
 	/* reset the rts and dtr */
 	/* do the actual close */
 	serial->open_count--;
+	kref_put(&serial->parent->ref, hso_serial_ref_free);
 	if (serial->open_count <= 0) {
-		kref_put(&serial->parent->ref, hso_serial_ref_free);
 		serial->open_count = 0;
 		if (serial->tty) {
 			serial->tty->driver_data = NULL;
-- 
GitLab


From 6c59f56978c3dffd447176d218bc5852842c9ce9 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Fri, 8 Aug 2008 12:02:14 -0700
Subject: [PATCH 067/869] USB: HSO: make tty_operations const

As recommended by Arjan.

Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Andrew Bird <ajb@spheresystems.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/hso.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 94c41bbedee..35a7772cf1a 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2725,7 +2725,7 @@ static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
 }
 
 /* operations setup of the serial interface */
-static struct tty_operations hso_serial_ops = {
+static const struct tty_operations hso_serial_ops = {
 	.open = hso_serial_open,
 	.close = hso_serial_close,
 	.write = hso_serial_write,
-- 
GitLab


From 0235f64175db41fa17a6ce5c9b58fd3550986eb4 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Fri, 8 Aug 2008 12:02:57 -0700
Subject: [PATCH 068/869] USB: HSO: minor fixes due to code review

Fix up problems in hso.c driver as pointed out by Andrew.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/hso.c | 43 ++++++++++++++++++++++++-------------------
 1 file changed, 24 insertions(+), 19 deletions(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 35a7772cf1a..1b7cac77159 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -102,8 +102,12 @@
 
 #define MAX_RX_URBS			2
 
-#define get_serial_by_tty(x)	\
-	(x ? (struct hso_serial *)x->driver_data : NULL)
+static inline struct hso_serial *get_serial_by_tty(struct tty_struct *tty)
+{
+	if (tty)
+		return tty->driver_data;
+	return NULL;
+}
 
 /*****************************************************************************/
 /* Debugging functions                                                       */
@@ -294,24 +298,25 @@ static int hso_get_activity(struct hso_device *hso_dev);
 
 /* #define DEBUG */
 
-#define dev2net(x) (x->port_data.dev_net)
-#define dev2ser(x) (x->port_data.dev_serial)
+static inline struct hso_net *dev2net(struct hso_device *hso_dev)
+{
+	return hso_dev->port_data.dev_net;
+}
+
+static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
+{
+	return hso_dev->port_data.dev_serial;
+}
 
 /* Debugging functions */
 #ifdef DEBUG
 static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
 		     unsigned int len)
 {
-	u8 i = 0;
-
-	printk(KERN_DEBUG "[%d:%s]: len %d", line_count, func_name, len);
+	static char name[255];
 
-	for (i = 0; i < len; i++) {
-		if (!(i % 16))
-			printk("\n    0x%03x:  ", i);
-		printk("%02x ", (unsigned char)buf[i]);
-	}
-	printk("\n");
+	sprintf(name, "hso[%d:%s]", line_count, func_name);
+	print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
 }
 
 #define DUMP(buf_, len_)	\
@@ -528,13 +533,12 @@ static struct hso_serial *get_serial_by_shared_int_and_type(
 
 static struct hso_serial *get_serial_by_index(unsigned index)
 {
-	struct hso_serial *serial;
+	struct hso_serial *serial = NULL;
 	unsigned long flags;
 
-	if (!serial_table[index])
-		return NULL;
 	spin_lock_irqsave(&serial_table_lock, flags);
-	serial = dev2ser(serial_table[index]);
+	if (serial_table[index])
+		serial = dev2ser(serial_table[index]);
 	spin_unlock_irqrestore(&serial_table_lock, flags);
 
 	return serial;
@@ -561,6 +565,7 @@ static int get_free_serial_index(void)
 static void set_serial_by_index(unsigned index, struct hso_serial *serial)
 {
 	unsigned long flags;
+
 	spin_lock_irqsave(&serial_table_lock, flags);
 	if (serial)
 		serial_table[index] = serial->parent;
@@ -569,7 +574,7 @@ static void set_serial_by_index(unsigned index, struct hso_serial *serial)
 	spin_unlock_irqrestore(&serial_table_lock, flags);
 }
 
-/* log a meaningfull explanation of an USB status */
+/* log a meaningful explanation of an USB status */
 static void log_usb_status(int status, const char *function)
 {
 	char *explanation;
@@ -2654,7 +2659,7 @@ static void hso_free_interface(struct usb_interface *interface)
 			hso_stop_net_device(network_table[i]);
 			cancel_work_sync(&network_table[i]->async_put_intf);
 			cancel_work_sync(&network_table[i]->async_get_intf);
-			if(rfk)
+			if (rfk)
 				rfkill_unregister(rfk);
 			hso_free_net_device(network_table[i]);
 		}
-- 
GitLab


From 85a73b333c0c06fcadb8e32f1e30f00e980f2fc7 Mon Sep 17 00:00:00 2001
From: David Brownell <david-b@pacbell.net>
Date: Fri, 8 Aug 2008 13:53:29 -0700
Subject: [PATCH 069/869] Kconfig: HSO driver bugfixes and updates

Move the Kconfig for the new "Option" driver so it's not in the
middle of the usbnet-based drivers, so the dependency displays
in the Kconfig user interfaces don't get trashed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/Kconfig | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 68e198bd538..0973b6e3702 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -154,17 +154,6 @@ config USB_NET_AX8817X
 	  This driver creates an interface named "ethX", where X depends on
 	  what other networking devices you have in use.
 
-config USB_HSO
-	tristate "Option USB High Speed Mobile Devices"
-	depends on USB && RFKILL
-	default n
-	help
-	  Choose this option if you have an Option HSDPA/HSUPA card.
-	  These cards support downlink speeds of 7.2Mbps or greater.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called hso.
-
 config USB_NET_CDCETHER
 	tristate "CDC Ethernet support (smart devices such as cable modems)"
 	depends on USB_USBNET
@@ -337,5 +326,15 @@ config USB_NET_ZAURUS
 	  really need this non-conformant variant of CDC Ethernet (or in
 	  some cases CDC MDLM) protocol, not "g_ether".
 
+config USB_HSO
+	tristate "Option USB High Speed Mobile Devices"
+	depends on USB && RFKILL
+	default n
+	help
+	  Choose this option if you have an Option HSDPA/HSUPA card.
+	  These cards support downlink speeds of 7.2Mbps or greater.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hso.
 
 endmenu
-- 
GitLab


From c7e65c17d75f29c846ff711b1dc5e823ba8de314 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Fri, 8 Aug 2008 00:55:17 +0900
Subject: [PATCH 070/869] [netdrvr] ne: Use CONFIG_MACH_TX49XX

After some cleanups in arch/mips area, now MACH_TX49XX is selected for
both TOSHIBA_RBTX4927 and TOSHIBA_RBTX4938.  Fold these two conditions
to one.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/Kconfig | 2 +-
 drivers/net/ne.c    | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4b4cb2bf4f1..a5c141cecd4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1172,7 +1172,7 @@ config ETH16I
 
 config NE2000
 	tristate "NE2000/NE1000 support"
-	depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
+	depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
 	select CRC32
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read
diff --git a/drivers/net/ne.c b/drivers/net/ne.c
index 42443d69742..fa3ceca4e15 100644
--- a/drivers/net/ne.c
+++ b/drivers/net/ne.c
@@ -118,7 +118,7 @@ bad_clone_list[] __initdata = {
     {"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */
     {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */
     {"REALTEK", "RTL8019", {0x00, 0x00, 0xe8}}, /* no-name with Realtek chip */
-#if defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+#ifdef CONFIG_MACH_TX49XX
     {"RBHMA4X00-RTL8019", "RBHMA4X00/RTL8019", {0x00, 0x60, 0x0a}},  /* Toshiba built-in */
 #endif
     {"LCS-8834", "LCS-8836", {0x04, 0x04, 0x37}}, /* ShinyNet (SET) */
@@ -142,7 +142,7 @@ bad_clone_list[] __initdata = {
 #if defined(CONFIG_PLAT_MAPPI)
 #  define DCR_VAL 0x4b
 #elif defined(CONFIG_PLAT_OAKS32R)  || \
-   defined(CONFIG_TOSHIBA_RBTX4927) || defined(CONFIG_TOSHIBA_RBTX4938)
+   defined(CONFIG_MACH_TX49XX)
 #  define DCR_VAL 0x48		/* 8-bit mode */
 #else
 #  define DCR_VAL 0x49
-- 
GitLab


From 1a3c4bc61547e5a75fd3b85b425624756da4cffb Mon Sep 17 00:00:00 2001
From: roel kluin <roel.kluin@gmail.com>
Date: Thu, 7 Aug 2008 12:24:42 -0400
Subject: [PATCH 071/869] atl1e: WAKE_MCAST 2x. 1st WAKE_UCAST?

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/atl1e/atl1e_ethtool.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/atl1e/atl1e_ethtool.c b/drivers/net/atl1e/atl1e_ethtool.c
index cdc3b85b10b..619c6583e1a 100644
--- a/drivers/net/atl1e/atl1e_ethtool.c
+++ b/drivers/net/atl1e/atl1e_ethtool.c
@@ -355,7 +355,7 @@ static int atl1e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 	struct atl1e_adapter *adapter = netdev_priv(netdev);
 
 	if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE |
-			    WAKE_MCAST | WAKE_BCAST | WAKE_MCAST))
+			    WAKE_UCAST | WAKE_MCAST | WAKE_BCAST))
 		return -EOPNOTSUPP;
 	/* these settings will always override what we currently have */
 	adapter->wol = 0;
-- 
GitLab


From c0912585ec8b64d846d56995241f2c8a7f48ee75 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 7 Aug 2008 17:21:09 +0100
Subject: [PATCH 072/869] AX88796: Fix locking in ethtool support

Fix a pair of nasty locking problems in the ax88796 driver
spotted by a sparse check:

warning: context imbalance in 'ax_get_settings' - wrong count at exit
warning: context imbalance in 'ax_set_settings' - wrong count at exit

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/ax88796.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ax88796.c b/drivers/net/ax88796.c
index 0b4adf4a0f7..a886a4b9f7e 100644
--- a/drivers/net/ax88796.c
+++ b/drivers/net/ax88796.c
@@ -554,7 +554,7 @@ static int ax_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	spin_lock_irqsave(&ax->mii_lock, flags);
 	mii_ethtool_gset(&ax->mii, cmd);
-	spin_lock_irqsave(&ax->mii_lock, flags);
+	spin_unlock_irqrestore(&ax->mii_lock, flags);
 
 	return 0;
 }
@@ -567,7 +567,7 @@ static int ax_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 
 	spin_lock_irqsave(&ax->mii_lock, flags);
 	rc = mii_ethtool_sset(&ax->mii, cmd);
-	spin_lock_irqsave(&ax->mii_lock, flags);
+	spin_unlock_irqrestore(&ax->mii_lock, flags);
 
 	return rc;
 }
-- 
GitLab


From cf417141cbb3a4ceb5cca15b2c1f099bd0a6603c Mon Sep 17 00:00:00 2001
From: Max Krasnyansky <maxk@qualcomm.com>
Date: Mon, 11 Aug 2008 14:33:53 -0700
Subject: [PATCH 073/869] sched, cpuset: rework sched domains and CPU hotplug
 handling (v4)

This is an updated version of my previous cpuset patch on top of
the latest mainline git.
The patch fixes CPU hotplug handling issues in the current cpusets code.
Namely circular locking in rebuild_sched_domains() and unsafe access to
the cpu_online_map in the cpuset cpu hotplug handler.

This version includes changes suggested by Paul Jackson (naming, comments,
style, etc). I also got rid of the separate workqueue thread because it is
now safe to call get_online_cpus() from workqueue callbacks.

Here are some more details:

rebuild_sched_domains() is the only way to rebuild sched domains
correctly based on the current cpuset settings. What this means
is that we need to be able to call it from different contexts,
like cpu hotplug for example.
Also latest scheduler code in -tip now calls rebuild_sched_domains()
directly from functions like arch_reinit_sched_domains().

In order to support that properly we need to rework cpuset locking
rules to avoid circular dependencies, which is what this patch does.
New lock nesting rules are explained in the comments.
We can now safely call rebuild_sched_domains() from virtually any
context. The only requirement is that it needs to be called under
get_online_cpus(). This allows cpu hotplug handlers and the scheduler
to call rebuild_sched_domains() directly.
The rest of the cpuset code now offloads sched domains rebuilds to
a workqueue (async_rebuild_sched_domains()).

This version of the patch addresses comments from the previous review.
I fixed all miss-formated comments and trailing spaces.

I also factored out the code that builds domain masks and split up CPU and
memory hotplug handling. This was needed to simplify locking, to avoid unsafe
access to the cpu_online_map from mem hotplug handler, and in general to make
things cleaner.

The patch passes moderate testing (building kernel with -j 16, creating &
removing domains and bringing cpus off/online at the same time) on the
quad-core2 based machine.

It passes lockdep checks, even with preemptable RCU enabled.
This time I also tested in with suspend/resume path and everything is working
as expected.

Signed-off-by: Max Krasnyansky <maxk@qualcomm.com>
Acked-by: Paul Jackson <pj@sgi.com>
Cc: menage@google.com
Cc: a.p.zijlstra@chello.nl
Cc: vegard.nossum@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/cpuset.c | 312 ++++++++++++++++++++++++++++--------------------
 1 file changed, 182 insertions(+), 130 deletions(-)

diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index d5ab79cf516..f227bc17269 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -14,6 +14,8 @@
  *  2003-10-22 Updates by Stephen Hemminger.
  *  2004 May-July Rework by Paul Jackson.
  *  2006 Rework by Paul Menage to use generic cgroups
+ *  2008 Rework of the scheduler domains and CPU hotplug handling
+ *       by Max Krasnyansky
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License.  See the file COPYING in the main directory of the Linux
@@ -236,9 +238,11 @@ static struct cpuset top_cpuset = {
 
 static DEFINE_MUTEX(callback_mutex);
 
-/* This is ugly, but preserves the userspace API for existing cpuset
+/*
+ * This is ugly, but preserves the userspace API for existing cpuset
  * users. If someone tries to mount the "cpuset" filesystem, we
- * silently switch it to mount "cgroup" instead */
+ * silently switch it to mount "cgroup" instead
+ */
 static int cpuset_get_sb(struct file_system_type *fs_type,
 			 int flags, const char *unused_dev_name,
 			 void *data, struct vfsmount *mnt)
@@ -473,10 +477,9 @@ static int validate_change(const struct cpuset *cur, const struct cpuset *trial)
 }
 
 /*
- * Helper routine for rebuild_sched_domains().
+ * Helper routine for generate_sched_domains().
  * Do cpusets a, b have overlapping cpus_allowed masks?
  */
-
 static int cpusets_overlap(struct cpuset *a, struct cpuset *b)
 {
 	return cpus_intersects(a->cpus_allowed, b->cpus_allowed);
@@ -518,26 +521,15 @@ update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c)
 }
 
 /*
- * rebuild_sched_domains()
- *
- * This routine will be called to rebuild the scheduler's dynamic
- * sched domains:
- * - if the flag 'sched_load_balance' of any cpuset with non-empty
- *   'cpus' changes,
- * - or if the 'cpus' allowed changes in any cpuset which has that
- *   flag enabled,
- * - or if the 'sched_relax_domain_level' of any cpuset which has
- *   that flag enabled and with non-empty 'cpus' changes,
- * - or if any cpuset with non-empty 'cpus' is removed,
- * - or if a cpu gets offlined.
- *
- * This routine builds a partial partition of the systems CPUs
- * (the set of non-overlappping cpumask_t's in the array 'part'
- * below), and passes that partial partition to the kernel/sched.c
- * partition_sched_domains() routine, which will rebuild the
- * schedulers load balancing domains (sched domains) as specified
- * by that partial partition.  A 'partial partition' is a set of
- * non-overlapping subsets whose union is a subset of that set.
+ * generate_sched_domains()
+ *
+ * This function builds a partial partition of the systems CPUs
+ * A 'partial partition' is a set of non-overlapping subsets whose
+ * union is a subset of that set.
+ * The output of this function needs to be passed to kernel/sched.c
+ * partition_sched_domains() routine, which will rebuild the scheduler's
+ * load balancing domains (sched domains) as specified by that partial
+ * partition.
  *
  * See "What is sched_load_balance" in Documentation/cpusets.txt
  * for a background explanation of this.
@@ -547,13 +539,7 @@ update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c)
  * domains when operating in the severe memory shortage situations
  * that could cause allocation failures below.
  *
- * Call with cgroup_mutex held.  May take callback_mutex during
- * call due to the kfifo_alloc() and kmalloc() calls.  May nest
- * a call to the get_online_cpus()/put_online_cpus() pair.
- * Must not be called holding callback_mutex, because we must not
- * call get_online_cpus() while holding callback_mutex.  Elsewhere
- * the kernel nests callback_mutex inside get_online_cpus() calls.
- * So the reverse nesting would risk an ABBA deadlock.
+ * Must be called with cgroup_lock held.
  *
  * The three key local variables below are:
  *    q  - a linked-list queue of cpuset pointers, used to implement a
@@ -588,10 +574,10 @@ update_domain_attr_tree(struct sched_domain_attr *dattr, struct cpuset *c)
  *	element of the partition (one sched domain) to be passed to
  *	partition_sched_domains().
  */
-
-void rebuild_sched_domains(void)
+static int generate_sched_domains(cpumask_t **domains,
+			struct sched_domain_attr **attributes)
 {
-	LIST_HEAD(q);		/* queue of cpusets to be scanned*/
+	LIST_HEAD(q);		/* queue of cpusets to be scanned */
 	struct cpuset *cp;	/* scans q */
 	struct cpuset **csa;	/* array of all cpuset ptrs */
 	int csn;		/* how many cpuset ptrs in csa so far */
@@ -601,23 +587,26 @@ void rebuild_sched_domains(void)
 	int ndoms;		/* number of sched domains in result */
 	int nslot;		/* next empty doms[] cpumask_t slot */
 
-	csa = NULL;
+	ndoms = 0;
 	doms = NULL;
 	dattr = NULL;
+	csa = NULL;
 
 	/* Special case for the 99% of systems with one, full, sched domain */
 	if (is_sched_load_balance(&top_cpuset)) {
-		ndoms = 1;
 		doms = kmalloc(sizeof(cpumask_t), GFP_KERNEL);
 		if (!doms)
-			goto rebuild;
+			goto done;
+
 		dattr = kmalloc(sizeof(struct sched_domain_attr), GFP_KERNEL);
 		if (dattr) {
 			*dattr = SD_ATTR_INIT;
 			update_domain_attr_tree(dattr, &top_cpuset);
 		}
 		*doms = top_cpuset.cpus_allowed;
-		goto rebuild;
+
+		ndoms = 1;
+		goto done;
 	}
 
 	csa = kmalloc(number_of_cpusets * sizeof(cp), GFP_KERNEL);
@@ -680,61 +669,141 @@ restart:
 		}
 	}
 
-	/* Convert <csn, csa> to <ndoms, doms> */
+	/*
+	 * Now we know how many domains to create.
+	 * Convert <csn, csa> to <ndoms, doms> and populate cpu masks.
+	 */
 	doms = kmalloc(ndoms * sizeof(cpumask_t), GFP_KERNEL);
-	if (!doms)
-		goto rebuild;
+	if (!doms) {
+		ndoms = 0;
+		goto done;
+	}
+
+	/*
+	 * The rest of the code, including the scheduler, can deal with
+	 * dattr==NULL case. No need to abort if alloc fails.
+	 */
 	dattr = kmalloc(ndoms * sizeof(struct sched_domain_attr), GFP_KERNEL);
 
 	for (nslot = 0, i = 0; i < csn; i++) {
 		struct cpuset *a = csa[i];
+		cpumask_t *dp;
 		int apn = a->pn;
 
-		if (apn >= 0) {
-			cpumask_t *dp = doms + nslot;
-
-			if (nslot == ndoms) {
-				static int warnings = 10;
-				if (warnings) {
-					printk(KERN_WARNING
-					 "rebuild_sched_domains confused:"
-					  " nslot %d, ndoms %d, csn %d, i %d,"
-					  " apn %d\n",
-					  nslot, ndoms, csn, i, apn);
-					warnings--;
-				}
-				continue;
+		if (apn < 0) {
+			/* Skip completed partitions */
+			continue;
+		}
+
+		dp = doms + nslot;
+
+		if (nslot == ndoms) {
+			static int warnings = 10;
+			if (warnings) {
+				printk(KERN_WARNING
+				 "rebuild_sched_domains confused:"
+				  " nslot %d, ndoms %d, csn %d, i %d,"
+				  " apn %d\n",
+				  nslot, ndoms, csn, i, apn);
+				warnings--;
 			}
+			continue;
+		}
 
-			cpus_clear(*dp);
-			if (dattr)
-				*(dattr + nslot) = SD_ATTR_INIT;
-			for (j = i; j < csn; j++) {
-				struct cpuset *b = csa[j];
-
-				if (apn == b->pn) {
-					cpus_or(*dp, *dp, b->cpus_allowed);
-					b->pn = -1;
-					if (dattr)
-						update_domain_attr_tree(dattr
-								   + nslot, b);
-				}
+		cpus_clear(*dp);
+		if (dattr)
+			*(dattr + nslot) = SD_ATTR_INIT;
+		for (j = i; j < csn; j++) {
+			struct cpuset *b = csa[j];
+
+			if (apn == b->pn) {
+				cpus_or(*dp, *dp, b->cpus_allowed);
+				if (dattr)
+					update_domain_attr_tree(dattr + nslot, b);
+
+				/* Done with this partition */
+				b->pn = -1;
 			}
-			nslot++;
 		}
+		nslot++;
 	}
 	BUG_ON(nslot != ndoms);
 
-rebuild:
-	/* Have scheduler rebuild sched domains */
+done:
+	kfree(csa);
+
+	*domains    = doms;
+	*attributes = dattr;
+	return ndoms;
+}
+
+/*
+ * Rebuild scheduler domains.
+ *
+ * Call with neither cgroup_mutex held nor within get_online_cpus().
+ * Takes both cgroup_mutex and get_online_cpus().
+ *
+ * Cannot be directly called from cpuset code handling changes
+ * to the cpuset pseudo-filesystem, because it cannot be called
+ * from code that already holds cgroup_mutex.
+ */
+static void do_rebuild_sched_domains(struct work_struct *unused)
+{
+	struct sched_domain_attr *attr;
+	cpumask_t *doms;
+	int ndoms;
+
 	get_online_cpus();
-	partition_sched_domains(ndoms, doms, dattr);
+
+	/* Generate domain masks and attrs */
+	cgroup_lock();
+	ndoms = generate_sched_domains(&doms, &attr);
+	cgroup_unlock();
+
+	/* Have scheduler rebuild the domains */
+	partition_sched_domains(ndoms, doms, attr);
+
 	put_online_cpus();
+}
 
-done:
-	kfree(csa);
-	/* Don't kfree(doms) -- partition_sched_domains() does that. */
-	/* Don't kfree(dattr) -- partition_sched_domains() does that. */
+static DECLARE_WORK(rebuild_sched_domains_work, do_rebuild_sched_domains);
+
+/*
+ * Rebuild scheduler domains, asynchronously via workqueue.
+ *
+ * If the flag 'sched_load_balance' of any cpuset with non-empty
+ * 'cpus' changes, or if the 'cpus' allowed changes in any cpuset
+ * which has that flag enabled, or if any cpuset with a non-empty
+ * 'cpus' is removed, then call this routine to rebuild the
+ * scheduler's dynamic sched domains.
+ *
+ * The rebuild_sched_domains() and partition_sched_domains()
+ * routines must nest cgroup_lock() inside get_online_cpus(),
+ * but such cpuset changes as these must nest that locking the
+ * other way, holding cgroup_lock() for much of the code.
+ *
+ * So in order to avoid an ABBA deadlock, the cpuset code handling
+ * these user changes delegates the actual sched domain rebuilding
+ * to a separate workqueue thread, which ends up processing the
+ * above do_rebuild_sched_domains() function.
+ */
+static void async_rebuild_sched_domains(void)
+{
+	schedule_work(&rebuild_sched_domains_work);
+}
+
+/*
+ * Accomplishes the same scheduler domain rebuild as the above
+ * async_rebuild_sched_domains(), however it directly calls the
+ * rebuild routine synchronously rather than calling it via an
+ * asynchronous work thread.
+ *
+ * This can only be called from code that is not holding
+ * cgroup_mutex (not nested in a cgroup_lock() call.)
+ */
+void rebuild_sched_domains(void)
+{
+	do_rebuild_sched_domains(NULL);
 }
 
 /**
@@ -863,7 +932,7 @@ static int update_cpumask(struct cpuset *cs, const char *buf)
 		return retval;
 
 	if (is_load_balanced)
-		rebuild_sched_domains();
+		async_rebuild_sched_domains();
 	return 0;
 }
 
@@ -1090,7 +1159,7 @@ static int update_relax_domain_level(struct cpuset *cs, s64 val)
 	if (val != cs->relax_domain_level) {
 		cs->relax_domain_level = val;
 		if (!cpus_empty(cs->cpus_allowed) && is_sched_load_balance(cs))
-			rebuild_sched_domains();
+			async_rebuild_sched_domains();
 	}
 
 	return 0;
@@ -1131,7 +1200,7 @@ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs,
 	mutex_unlock(&callback_mutex);
 
 	if (cpus_nonempty && balance_flag_changed)
-		rebuild_sched_domains();
+		async_rebuild_sched_domains();
 
 	return 0;
 }
@@ -1492,6 +1561,9 @@ static u64 cpuset_read_u64(struct cgroup *cont, struct cftype *cft)
 	default:
 		BUG();
 	}
+
+	/* Unreachable but makes gcc happy */
+	return 0;
 }
 
 static s64 cpuset_read_s64(struct cgroup *cont, struct cftype *cft)
@@ -1504,6 +1576,9 @@ static s64 cpuset_read_s64(struct cgroup *cont, struct cftype *cft)
 	default:
 		BUG();
 	}
+
+	/* Unrechable but makes gcc happy */
+	return 0;
 }
 
 
@@ -1692,15 +1767,9 @@ static struct cgroup_subsys_state *cpuset_create(
 }
 
 /*
- * Locking note on the strange update_flag() call below:
- *
  * If the cpuset being removed has its flag 'sched_load_balance'
  * enabled, then simulate turning sched_load_balance off, which
- * will call rebuild_sched_domains().  The get_online_cpus()
- * call in rebuild_sched_domains() must not be made while holding
- * callback_mutex.  Elsewhere the kernel nests callback_mutex inside
- * get_online_cpus() calls.  So the reverse nesting would risk an
- * ABBA deadlock.
+ * will call async_rebuild_sched_domains().
  */
 
 static void cpuset_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
@@ -1719,7 +1788,7 @@ static void cpuset_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
 struct cgroup_subsys cpuset_subsys = {
 	.name = "cpuset",
 	.create = cpuset_create,
-	.destroy  = cpuset_destroy,
+	.destroy = cpuset_destroy,
 	.can_attach = cpuset_can_attach,
 	.attach = cpuset_attach,
 	.populate = cpuset_populate,
@@ -1811,7 +1880,7 @@ static void move_member_tasks_to_cpuset(struct cpuset *from, struct cpuset *to)
 }
 
 /*
- * If common_cpu_mem_hotplug_unplug(), below, unplugs any CPUs
+ * If CPU and/or memory hotplug handlers, below, unplug any CPUs
  * or memory nodes, we need to walk over the cpuset hierarchy,
  * removing that CPU or node from all cpusets.  If this removes the
  * last CPU or node from a cpuset, then move the tasks in the empty
@@ -1902,35 +1971,6 @@ static void scan_for_empty_cpusets(const struct cpuset *root)
 	}
 }
 
-/*
- * The cpus_allowed and mems_allowed nodemasks in the top_cpuset track
- * cpu_online_map and node_states[N_HIGH_MEMORY].  Force the top cpuset to
- * track what's online after any CPU or memory node hotplug or unplug event.
- *
- * Since there are two callers of this routine, one for CPU hotplug
- * events and one for memory node hotplug events, we could have coded
- * two separate routines here.  We code it as a single common routine
- * in order to minimize text size.
- */
-
-static void common_cpu_mem_hotplug_unplug(int rebuild_sd)
-{
-	cgroup_lock();
-
-	top_cpuset.cpus_allowed = cpu_online_map;
-	top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
-	scan_for_empty_cpusets(&top_cpuset);
-
-	/*
-	 * Scheduler destroys domains on hotplug events.
-	 * Rebuild them based on the current settings.
-	 */
-	if (rebuild_sd)
-		rebuild_sched_domains();
-
-	cgroup_unlock();
-}
-
 /*
  * The top_cpuset tracks what CPUs and Memory Nodes are online,
  * period.  This is necessary in order to make cpusets transparent
@@ -1939,40 +1979,52 @@ static void common_cpu_mem_hotplug_unplug(int rebuild_sd)
  *
  * This routine ensures that top_cpuset.cpus_allowed tracks
  * cpu_online_map on each CPU hotplug (cpuhp) event.
+ *
+ * Called within get_online_cpus().  Needs to call cgroup_lock()
+ * before calling generate_sched_domains().
  */
-
-static int cpuset_handle_cpuhp(struct notifier_block *unused_nb,
+static int cpuset_track_online_cpus(struct notifier_block *unused_nb,
 				unsigned long phase, void *unused_cpu)
 {
+	struct sched_domain_attr *attr;
+	cpumask_t *doms;
+	int ndoms;
+
 	switch (phase) {
-	case CPU_UP_CANCELED:
-	case CPU_UP_CANCELED_FROZEN:
-	case CPU_DOWN_FAILED:
-	case CPU_DOWN_FAILED_FROZEN:
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		common_cpu_mem_hotplug_unplug(1);
 		break;
+
 	default:
 		return NOTIFY_DONE;
 	}
 
+	cgroup_lock();
+	top_cpuset.cpus_allowed = cpu_online_map;
+	scan_for_empty_cpusets(&top_cpuset);
+	ndoms = generate_sched_domains(&doms, &attr);
+	cgroup_unlock();
+
+	/* Have scheduler rebuild the domains */
+	partition_sched_domains(ndoms, doms, attr);
+
 	return NOTIFY_OK;
 }
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 /*
  * Keep top_cpuset.mems_allowed tracking node_states[N_HIGH_MEMORY].
- * Call this routine anytime after you change
- * node_states[N_HIGH_MEMORY].
- * See also the previous routine cpuset_handle_cpuhp().
+ * Call this routine anytime after node_states[N_HIGH_MEMORY] changes.
+ * See also the previous routine cpuset_track_online_cpus().
  */
-
 void cpuset_track_online_nodes(void)
 {
-	common_cpu_mem_hotplug_unplug(0);
+	cgroup_lock();
+	top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
+	scan_for_empty_cpusets(&top_cpuset);
+	cgroup_unlock();
 }
 #endif
 
@@ -1987,7 +2039,7 @@ void __init cpuset_init_smp(void)
 	top_cpuset.cpus_allowed = cpu_online_map;
 	top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY];
 
-	hotcpu_notifier(cpuset_handle_cpuhp, 0);
+	hotcpu_notifier(cpuset_track_online_cpus, 0);
 }
 
 /**
-- 
GitLab


From 7c6337a15e3d4689efe703e8bb65ae82cc13c435 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Thu, 14 Aug 2008 15:29:09 -0700
Subject: [PATCH 074/869] bnx2: Fix logic to setup VLAN rx tagging.

We should now be checking BNX2_FLAG_CAN_KEEP_VLAN to determine how
to set the VLAN rx tagging in the RX_MODE register.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 5ebde67d429..0623ceb7a0e 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -3237,10 +3237,10 @@ bnx2_set_rx_mode(struct net_device *dev)
 				  BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
 	sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN;
 #ifdef BCM_VLAN
-	if (!bp->vlgrp && !(bp->flags & BNX2_FLAG_ASF_ENABLE))
+	if (!bp->vlgrp && (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN))
 		rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
 #else
-	if (!(bp->flags & BNX2_FLAG_ASF_ENABLE))
+	if (bp->flags & BNX2_FLAG_CAN_KEEP_VLAN)
 		rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG;
 #endif
 	if (dev->flags & IFF_PROMISC) {
-- 
GitLab


From 729b85cd47f4e63657505cb5c6af104e19250805 Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Thu, 14 Aug 2008 15:29:39 -0700
Subject: [PATCH 075/869] bnx2: Use proper CONFIG_VLAN_8021Q to compile the
 VLAN code.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 0623ceb7a0e..a2a010ede59 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -35,7 +35,7 @@
 #include <linux/time.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
-#ifdef NETIF_F_HW_VLAN_TX
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 #include <linux/if_vlan.h>
 #define BCM_VLAN 1
 #endif
@@ -5963,10 +5963,12 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM;
 	}
 
+#ifdef BCM_VLAN
 	if (bp->vlgrp && vlan_tx_tag_present(skb)) {
 		vlan_tag_flags |=
 			(TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16));
 	}
+#endif
 	if ((mss = skb_shinfo(skb)->gso_size)) {
 		u32 tcp_opt_len, ip_tcp_len;
 		struct iphdr *iph;
-- 
GitLab


From f22828e89f4f3e8c74ca7ffa69b0410afbd80eee Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Thu, 14 Aug 2008 15:30:14 -0700
Subject: [PATCH 076/869] bnx2: Reinsert VLAN tag when necessary.

In certain cases when ASF or other management firmware is running, the
chip may be configured to always strip out the VLAN tag even when
VLAN acceleration is not enabled.  This causes some VLAN tagged
packets to be received by the host stack without any knowledge that
the original packet was VLAN tagged.

We fix this by re-inserting the VLAN tag into the packet when necessary.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 35 +++++++++++++++++++++++++++--------
 1 file changed, 27 insertions(+), 8 deletions(-)

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index a2a010ede59..1f2e76fda01 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -2876,6 +2876,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		struct sw_bd *rx_buf;
 		struct sk_buff *skb;
 		dma_addr_t dma_addr;
+		u16 vtag = 0;
+		int hw_vlan __maybe_unused = 0;
 
 		sw_ring_cons = RX_RING_IDX(sw_cons);
 		sw_ring_prod = RX_RING_IDX(sw_prod);
@@ -2919,7 +2921,7 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		if (len <= bp->rx_copy_thresh) {
 			struct sk_buff *new_skb;
 
-			new_skb = netdev_alloc_skb(bp->dev, len + 2);
+			new_skb = netdev_alloc_skb(bp->dev, len + 6);
 			if (new_skb == NULL) {
 				bnx2_reuse_rx_skb(bp, rxr, skb, sw_ring_cons,
 						  sw_ring_prod);
@@ -2928,9 +2930,9 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 
 			/* aligned copy */
 			skb_copy_from_linear_data_offset(skb,
-							 BNX2_RX_OFFSET - 2,
-				      new_skb->data, len + 2);
-			skb_reserve(new_skb, 2);
+							 BNX2_RX_OFFSET - 6,
+				      new_skb->data, len + 6);
+			skb_reserve(new_skb, 6);
 			skb_put(new_skb, len);
 
 			bnx2_reuse_rx_skb(bp, rxr, skb,
@@ -2941,6 +2943,25 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 			   dma_addr, (sw_ring_cons << 16) | sw_ring_prod)))
 			goto next_rx;
 
+		if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) &&
+		    !(bp->rx_mode & BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG)) {
+			vtag = rx_hdr->l2_fhdr_vlan_tag;
+#ifdef BCM_VLAN
+			if (bp->vlgrp)
+				hw_vlan = 1;
+			else
+#endif
+			{
+				struct vlan_ethhdr *ve = (struct vlan_ethhdr *)
+					__skb_push(skb, 4);
+
+				memmove(ve, skb->data + 4, ETH_ALEN * 2);
+				ve->h_vlan_proto = htons(ETH_P_8021Q);
+				ve->h_vlan_TCI = htons(vtag);
+				len += 4;
+			}
+		}
+
 		skb->protocol = eth_type_trans(skb, bp->dev);
 
 		if ((len > (bp->dev->mtu + ETH_HLEN)) &&
@@ -2962,10 +2983,8 @@ bnx2_rx_int(struct bnx2 *bp, struct bnx2_napi *bnapi, int budget)
 		}
 
 #ifdef BCM_VLAN
-		if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && bp->vlgrp) {
-			vlan_hwaccel_receive_skb(skb, bp->vlgrp,
-				rx_hdr->l2_fhdr_vlan_tag);
-		}
+		if (hw_vlan)
+			vlan_hwaccel_receive_skb(skb, bp->vlgrp, vtag);
 		else
 #endif
 			netif_receive_skb(skb);
-- 
GitLab


From 0eb8b1fe9238ca4c1797e4c105d5790abda1726f Mon Sep 17 00:00:00 2001
From: Michael Chan <mchan@broadcom.com>
Date: Thu, 14 Aug 2008 15:30:31 -0700
Subject: [PATCH 077/869] bnx2: Update version to 1.8.0.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 1f2e76fda01..d4548101e49 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -57,8 +57,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.7.9"
-#define DRV_MODULE_RELDATE	"July 18, 2008"
+#define DRV_MODULE_VERSION	"1.8.0"
+#define DRV_MODULE_RELDATE	"Aug 14, 2008"
 
 #define RUN_AT(x) (jiffies + (x))
 
-- 
GitLab


From 191cd582500f49b32a63040fedeebb0168c720af Mon Sep 17 00:00:00 2001
From: Brian Haley <brian.haley@hp.com>
Date: Thu, 14 Aug 2008 15:33:21 -0700
Subject: [PATCH 078/869] netns: Add network namespace argument to
 rt6_fill_node() and ipv6_dev_get_saddr()

ipv6_dev_get_saddr() blindly de-references dst_dev to get the network
namespace, but some callers might pass NULL.  Change callers to pass a
namespace pointer instead.

Signed-off-by: Brian Haley <brian.haley@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/addrconf.h  |  3 ++-
 include/net/ip6_route.h |  1 +
 net/ipv6/addrconf.c     |  3 +--
 net/ipv6/fib6_rules.c   |  3 ++-
 net/ipv6/ip6_fib.c      |  1 +
 net/ipv6/ip6_output.c   |  2 +-
 net/ipv6/ndisc.c        |  2 +-
 net/ipv6/route.c        | 12 +++++++-----
 net/ipv6/xfrm6_policy.c |  4 +++-
 net/sctp/ipv6.c         |  3 ++-
 10 files changed, 21 insertions(+), 13 deletions(-)

diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 06b28142b3a..c216de528b0 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -80,7 +80,8 @@ extern struct inet6_ifaddr      *ipv6_get_ifaddr(struct net *net,
 						 struct net_device *dev,
 						 int strict);
 
-extern int			ipv6_dev_get_saddr(struct net_device *dev, 
+extern int			ipv6_dev_get_saddr(struct net *net,
+					       struct net_device *dev,
 					       const struct in6_addr *daddr,
 					       unsigned int srcprefs,
 					       struct in6_addr *saddr);
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index bc391ba101e..5f53db7e4e5 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -107,6 +107,7 @@ struct rt6_rtnl_dump_arg
 {
 	struct sk_buff *skb;
 	struct netlink_callback *cb;
+	struct net *net;
 };
 
 extern int rt6_dump_route(struct rt6_info *rt, void *p_arg);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index a7842c54f58..e2d3b7580b7 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1106,13 +1106,12 @@ out:
 	return ret;
 }
 
-int ipv6_dev_get_saddr(struct net_device *dst_dev,
+int ipv6_dev_get_saddr(struct net *net, struct net_device *dst_dev,
 		       const struct in6_addr *daddr, unsigned int prefs,
 		       struct in6_addr *saddr)
 {
 	struct ipv6_saddr_score scores[2],
 				*score = &scores[0], *hiscore = &scores[1];
-	struct net *net = dev_net(dst_dev);
 	struct ipv6_saddr_dst dst;
 	struct net_device *dev;
 	int dst_type;
diff --git a/net/ipv6/fib6_rules.c b/net/ipv6/fib6_rules.c
index 8d05527524e..f5de3f9dc69 100644
--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -93,7 +93,8 @@ static int fib6_rule_action(struct fib_rule *rule, struct flowi *flp,
 			if (flags & RT6_LOOKUP_F_SRCPREF_COA)
 				srcprefs |= IPV6_PREFER_SRC_COA;
 
-			if (ipv6_dev_get_saddr(ip6_dst_idev(&rt->u.dst)->dev,
+			if (ipv6_dev_get_saddr(net,
+					       ip6_dst_idev(&rt->u.dst)->dev,
 					       &flp->fl6_dst, srcprefs,
 					       &saddr))
 				goto again;
diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c
index 52dddc25d3e..29c7c99e69f 100644
--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -378,6 +378,7 @@ static int inet6_dump_fib(struct sk_buff *skb, struct netlink_callback *cb)
 
 	arg.skb = skb;
 	arg.cb = cb;
+	arg.net = net;
 	w->args = &arg;
 
 	for (h = s_h; h < FIB_TABLE_HASHSZ; h++, s_e = 0) {
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index a4402de425d..0e844c2736a 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -934,7 +934,7 @@ static int ip6_dst_lookup_tail(struct sock *sk,
 		goto out_err_release;
 
 	if (ipv6_addr_any(&fl->fl6_src)) {
-		err = ipv6_dev_get_saddr(ip6_dst_idev(*dst)->dev,
+		err = ipv6_dev_get_saddr(net, ip6_dst_idev(*dst)->dev,
 					 &fl->fl6_dst,
 					 sk ? inet6_sk(sk)->srcprefs : 0,
 					 &fl->fl6_src);
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index beb48e3f038..f1c62ba0f56 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -549,7 +549,7 @@ static void ndisc_send_na(struct net_device *dev, struct neighbour *neigh,
 			override = 0;
 		in6_ifa_put(ifp);
 	} else {
-		if (ipv6_dev_get_saddr(dev, daddr,
+		if (ipv6_dev_get_saddr(dev_net(dev), dev, daddr,
 				       inet6_sk(dev_net(dev)->ipv6.ndisc_sk)->srcprefs,
 				       &tmpaddr))
 			return;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 41b165ffb36..9af6115f0f5 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -2106,7 +2106,8 @@ static inline size_t rt6_nlmsg_size(void)
 	       + nla_total_size(sizeof(struct rta_cacheinfo));
 }
 
-static int rt6_fill_node(struct sk_buff *skb, struct rt6_info *rt,
+static int rt6_fill_node(struct net *net,
+			 struct sk_buff *skb, struct rt6_info *rt,
 			 struct in6_addr *dst, struct in6_addr *src,
 			 int iif, int type, u32 pid, u32 seq,
 			 int prefix, int nowait, unsigned int flags)
@@ -2189,7 +2190,7 @@ static int rt6_fill_node(struct sk_buff *skb, struct rt6_info *rt,
 	} else if (dst) {
 		struct inet6_dev *idev = ip6_dst_idev(&rt->u.dst);
 		struct in6_addr saddr_buf;
-		if (ipv6_dev_get_saddr(idev ? idev->dev : NULL,
+		if (ipv6_dev_get_saddr(net, idev ? idev->dev : NULL,
 				       dst, 0, &saddr_buf) == 0)
 			NLA_PUT(skb, RTA_PREFSRC, 16, &saddr_buf);
 	}
@@ -2234,7 +2235,8 @@ int rt6_dump_route(struct rt6_info *rt, void *p_arg)
 	} else
 		prefix = 0;
 
-	return rt6_fill_node(arg->skb, rt, NULL, NULL, 0, RTM_NEWROUTE,
+	return rt6_fill_node(arg->net,
+		     arg->skb, rt, NULL, NULL, 0, RTM_NEWROUTE,
 		     NETLINK_CB(arg->cb->skb).pid, arg->cb->nlh->nlmsg_seq,
 		     prefix, 0, NLM_F_MULTI);
 }
@@ -2300,7 +2302,7 @@ static int inet6_rtm_getroute(struct sk_buff *in_skb, struct nlmsghdr* nlh, void
 	rt = (struct rt6_info*) ip6_route_output(net, NULL, &fl);
 	skb->dst = &rt->u.dst;
 
-	err = rt6_fill_node(skb, rt, &fl.fl6_dst, &fl.fl6_src, iif,
+	err = rt6_fill_node(net, skb, rt, &fl.fl6_dst, &fl.fl6_src, iif,
 			    RTM_NEWROUTE, NETLINK_CB(in_skb).pid,
 			    nlh->nlmsg_seq, 0, 0, 0);
 	if (err < 0) {
@@ -2327,7 +2329,7 @@ void inet6_rt_notify(int event, struct rt6_info *rt, struct nl_info *info)
 	if (skb == NULL)
 		goto errout;
 
-	err = rt6_fill_node(skb, rt, NULL, NULL, 0,
+	err = rt6_fill_node(net, skb, rt, NULL, NULL, 0,
 				event, info->pid, seq, 0, 0, 0);
 	if (err < 0) {
 		/* -EMSGSIZE implies BUG in rt6_nlmsg_size() */
diff --git a/net/ipv6/xfrm6_policy.c b/net/ipv6/xfrm6_policy.c
index 8f1e0543b3c..08e4cbbe3f0 100644
--- a/net/ipv6/xfrm6_policy.c
+++ b/net/ipv6/xfrm6_policy.c
@@ -52,12 +52,14 @@ static struct dst_entry *xfrm6_dst_lookup(int tos, xfrm_address_t *saddr,
 static int xfrm6_get_saddr(xfrm_address_t *saddr, xfrm_address_t *daddr)
 {
 	struct dst_entry *dst;
+	struct net_device *dev;
 
 	dst = xfrm6_dst_lookup(0, NULL, daddr);
 	if (IS_ERR(dst))
 		return -EHOSTUNREACH;
 
-	ipv6_dev_get_saddr(ip6_dst_idev(dst)->dev,
+	dev = ip6_dst_idev(dst)->dev;
+	ipv6_dev_get_saddr(dev_net(dev), dev,
 			   (struct in6_addr *)&daddr->a6, 0,
 			   (struct in6_addr *)&saddr->a6);
 	dst_release(dst);
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 483a01d0740..47f91afa021 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -319,7 +319,8 @@ static void sctp_v6_get_saddr(struct sctp_sock *sk,
 			  __func__, asoc, dst, NIP6(daddr->v6.sin6_addr));
 
 	if (!asoc) {
-		ipv6_dev_get_saddr(dst ? ip6_dst_idev(dst)->dev : NULL,
+		ipv6_dev_get_saddr(sock_net(sctp_opt2sk(sk)),
+				   dst ? ip6_dst_idev(dst)->dev : NULL,
 				   &daddr->v6.sin6_addr,
 				   inet6_sk(&sk->inet.sk)->srcprefs,
 				   &saddr->v6.sin6_addr);
-- 
GitLab


From 323c048836f73a11ded6f9743feda21c00465cb0 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Thu, 14 Aug 2008 17:01:10 -0700
Subject: [PATCH 079/869] pkt_sched: Fix unlocking in tc_ctl_tfilter()

Fix a bug with spin_lock_bh() inserted instead of spin_unlock_bh() by
some recent patch.

Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/cls_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index d2b6f54a626..5cafdd4c801 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -280,7 +280,7 @@ replay:
 		if (n->nlmsg_type == RTM_DELTFILTER && t->tcm_handle == 0) {
 			spin_lock_bh(root_lock);
 			*back = tp->next;
-			spin_lock_bh(root_lock);
+			spin_unlock_bh(root_lock);
 
 			tfilter_notify(skb, n, tp, fh, RTM_DELTFILTER);
 			tcf_destroy(tp);
-- 
GitLab


From 89499759dc0dd300528510f465b0bf532fc79a2a Mon Sep 17 00:00:00 2001
From: Seth Heasley <seth.heasley@intel.com>
Date: Mon, 11 Aug 2008 17:01:50 -0700
Subject: [PATCH 080/869] x86/PCI: irq and pci_ids patch for Intel Ibex Peak
 PCHs

This patch adds the Intel Ibex Peak (PCH) LPC and SMBus Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 arch/x86/pci/irq.c      | 2 ++
 include/linux/pci_ids.h | 3 +++
 2 files changed, 5 insertions(+)

diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index fec0123b33a..8e077185e18 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -590,6 +590,8 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 	case PCI_DEVICE_ID_INTEL_ICH10_1:
 	case PCI_DEVICE_ID_INTEL_ICH10_2:
 	case PCI_DEVICE_ID_INTEL_ICH10_3:
+	case PCI_DEVICE_ID_INTEL_PCH_0:
+	case PCI_DEVICE_ID_INTEL_PCH_1:
 		r->name = "PIIX/ICH";
 		r->get = pirq_piix_get;
 		r->set = pirq_piix_set;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 9ec2bcce8e8..f1624b39675 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2428,6 +2428,9 @@
 #define PCI_DEVICE_ID_INTEL_ICH10_3	0x3a1a
 #define PCI_DEVICE_ID_INTEL_ICH10_4	0x3a30
 #define PCI_DEVICE_ID_INTEL_ICH10_5	0x3a60
+#define PCI_DEVICE_ID_INTEL_PCH_0	0x3b10
+#define PCI_DEVICE_ID_INTEL_PCH_1	0x3b11
+#define PCI_DEVICE_ID_INTEL_PCH_2	0x3b30
 #define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
 #define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
 #define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
-- 
GitLab


From 7ec01ff950c455aa1f1ccfaf347eb1aa9ec160d5 Mon Sep 17 00:00:00 2001
From: Ralph Campbell <ralph.campbell@qlogic.com>
Date: Fri, 15 Aug 2008 11:23:47 -0700
Subject: [PATCH 081/869] IB/ipath: Fix lost UD send work request

If a UD QP has some work requests queued to be sent by the DMA engine
followed by a local loopback work request, we have to wait for the
previous work requests to finish or the completion for the local
loopback work request would be generated out of order.  The problem
was that the work request queue pointer was already updated so that
the request would not be processed when the DMA queue drained.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/ipath/ipath_ud.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 36aa242c487..729446f56aa 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -267,6 +267,7 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 	u16 lrh0;
 	u16 lid;
 	int ret = 0;
+	int next_cur;
 
 	spin_lock_irqsave(&qp->s_lock, flags);
 
@@ -290,8 +291,9 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 		goto bail;
 
 	wqe = get_swqe_ptr(qp, qp->s_cur);
-	if (++qp->s_cur >= qp->s_size)
-		qp->s_cur = 0;
+	next_cur = qp->s_cur + 1;
+	if (next_cur >= qp->s_size)
+		next_cur = 0;
 
 	/* Construct the header. */
 	ah_attr = &to_iah(wqe->wr.wr.ud.ah)->attr;
@@ -315,6 +317,7 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 				qp->s_flags |= IPATH_S_WAIT_DMA;
 				goto bail;
 			}
+			qp->s_cur = next_cur;
 			spin_unlock_irqrestore(&qp->s_lock, flags);
 			ipath_ud_loopback(qp, wqe);
 			spin_lock_irqsave(&qp->s_lock, flags);
@@ -323,6 +326,7 @@ int ipath_make_ud_req(struct ipath_qp *qp)
 		}
 	}
 
+	qp->s_cur = next_cur;
 	extra_bytes = -wqe->length & 3;
 	nwords = (wqe->length + extra_bytes) >> 2;
 
-- 
GitLab


From 24babadec0209e5f84c067cb89aca6515486d35c Mon Sep 17 00:00:00 2001
From: Dave Olson <dave.olson@qlogic.com>
Date: Fri, 15 Aug 2008 11:25:20 -0700
Subject: [PATCH 082/869] IB/ipath: Fix incorrect check for max physical
 address in TID

The check for max physical address was incorrect, thus limiting the
range of allowed physical addresses.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/hw/ipath/ipath_iba7220.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/infiniband/hw/ipath/ipath_iba7220.c b/drivers/infiniband/hw/ipath/ipath_iba7220.c
index d90f5e9a54f..9839e20119b 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba7220.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba7220.c
@@ -1720,7 +1720,7 @@ static void ipath_7220_put_tid(struct ipath_devdata *dd, u64 __iomem *tidptr,
 				 "not 2KB aligned!\n", pa);
 			return;
 		}
-		if (pa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
+		if (chippa >= (1UL << IBA7220_TID_SZ_SHIFT)) {
 			ipath_dev_err(dd,
 				      "BUG: Physical page address 0x%lx "
 				      "larger than supported\n", pa);
-- 
GitLab


From c6153b5b77650879d78dec76414213c76dd8d574 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 15 Aug 2008 13:44:31 -0700
Subject: [PATCH 083/869] ipv4: Disable route secret interval on zero interval

Let me first state that disabling the route cache hash rebuild
should not be done without extensive analysis on the risk profile
and careful deliberation.

However, there are times when this can be done safely or for
testing.  For example, when you have mechanisms for ensuring
that offending parties do not exist in your network.

This patch lets the user disable the rebuild if the interval is
set to zero.  This also incidentally fixes a divide-by-zero error
with name-spaces.

In addition, this patch makes the effect of an interval change
immediate rather than it taking effect at the next rebuild as
is currently the case.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/route.c | 76 ++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 70 insertions(+), 6 deletions(-)

diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 16fc6f454a3..cca921ea855 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2914,6 +2914,68 @@ static int ipv4_sysctl_rtcache_flush_strategy(ctl_table *table,
 	return 0;
 }
 
+static void rt_secret_reschedule(int old)
+{
+	struct net *net;
+	int new = ip_rt_secret_interval;
+	int diff = new - old;
+
+	if (!diff)
+		return;
+
+	rtnl_lock();
+	for_each_net(net) {
+		int deleted = del_timer_sync(&net->ipv4.rt_secret_timer);
+
+		if (!new)
+			continue;
+
+		if (deleted) {
+			long time = net->ipv4.rt_secret_timer.expires - jiffies;
+
+			if (time <= 0 || (time += diff) <= 0)
+				time = 0;
+
+			net->ipv4.rt_secret_timer.expires = time;
+		} else
+			net->ipv4.rt_secret_timer.expires = new;
+
+		net->ipv4.rt_secret_timer.expires += jiffies;
+		add_timer(&net->ipv4.rt_secret_timer);
+	}
+	rtnl_unlock();
+}
+
+static int ipv4_sysctl_rt_secret_interval(ctl_table *ctl, int write,
+					  struct file *filp,
+					  void __user *buffer, size_t *lenp,
+					  loff_t *ppos)
+{
+	int old = ip_rt_secret_interval;
+	int ret = proc_dointvec_jiffies(ctl, write, filp, buffer, lenp, ppos);
+
+	rt_secret_reschedule(old);
+
+	return ret;
+}
+
+static int ipv4_sysctl_rt_secret_interval_strategy(ctl_table *table,
+						   int __user *name,
+						   int nlen,
+						   void __user *oldval,
+						   size_t __user *oldlenp,
+						   void __user *newval,
+						   size_t newlen)
+{
+	int old = ip_rt_secret_interval;
+	int ret = sysctl_jiffies(table, name, nlen, oldval, oldlenp, newval,
+				 newlen);
+
+	rt_secret_reschedule(old);
+
+	return ret;
+}
+
 static ctl_table ipv4_route_table[] = {
 	{
 		.ctl_name	= NET_IPV4_ROUTE_GC_THRESH,
@@ -3048,8 +3110,8 @@ static ctl_table ipv4_route_table[] = {
 		.data		= &ip_rt_secret_interval,
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
-		.proc_handler	= &proc_dointvec_jiffies,
-		.strategy	= &sysctl_jiffies,
+		.proc_handler	= &ipv4_sysctl_rt_secret_interval,
+		.strategy	= &ipv4_sysctl_rt_secret_interval_strategy,
 	},
 	{ .ctl_name = 0 }
 };
@@ -3126,10 +3188,12 @@ static __net_init int rt_secret_timer_init(struct net *net)
 	net->ipv4.rt_secret_timer.data = (unsigned long)net;
 	init_timer_deferrable(&net->ipv4.rt_secret_timer);
 
-	net->ipv4.rt_secret_timer.expires =
-		jiffies + net_random() % ip_rt_secret_interval +
-		ip_rt_secret_interval;
-	add_timer(&net->ipv4.rt_secret_timer);
+	if (ip_rt_secret_interval) {
+		net->ipv4.rt_secret_timer.expires =
+			jiffies + net_random() % ip_rt_secret_interval +
+			ip_rt_secret_interval;
+		add_timer(&net->ipv4.rt_secret_timer);
+	}
 	return 0;
 }
 
-- 
GitLab


From 77b483f132ba25edf4ef455dd87a91ab7bbf4170 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 15 Aug 2008 14:07:24 -0700
Subject: [PATCH 084/869] tg3: Add APE register access locking

If the driver resets the chip while the APE is performing a register
access, that register access will never complete and the APE will hang
indefinitely.  To prevent this race condition, the driver must acquire
an APE mutex before resetting the chip.  The APE will not attempt a
register access until it acquires this lock.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 6 ++++++
 drivers/net/tg3.h | 1 +
 2 files changed, 7 insertions(+)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index d2439b85a79..e3fd74b871a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -536,6 +536,7 @@ static int tg3_ape_lock(struct tg3 *tp, int locknum)
 		return 0;
 
 	switch (locknum) {
+		case TG3_APE_LOCK_GRC:
 		case TG3_APE_LOCK_MEM:
 			break;
 		default:
@@ -573,6 +574,7 @@ static void tg3_ape_unlock(struct tg3 *tp, int locknum)
 		return;
 
 	switch (locknum) {
+		case TG3_APE_LOCK_GRC:
 		case TG3_APE_LOCK_MEM:
 			break;
 		default:
@@ -5760,6 +5762,8 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 	tg3_mdio_stop(tp);
 
+	tg3_ape_lock(tp, TG3_APE_LOCK_GRC);
+
 	/* No matching tg3_nvram_unlock() after this because
 	 * chip reset below will undo the nvram lock.
 	 */
@@ -5914,6 +5918,8 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 	tg3_mdio_start(tp);
 
+	tg3_ape_unlock(tp, TG3_APE_LOCK_GRC);
+
 	err = tg3_poll_fw(tp);
 	if (err)
 		return err;
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index df07842172b..dd1af508023 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1889,6 +1889,7 @@
 #define  APE_EVENT_STATUS_EVENT_PENDING	 0x80000000
 
 /* APE convenience enumerations. */
+#define TG3_APE_LOCK_GRC                1
 #define TG3_APE_LOCK_MEM                4
 
 #define TG3_EEPROM_SB_F1R2_MBA_OFF	0x10
-- 
GitLab


From 731fd79c133dc04cabee17ecfa7661189a8df5c8 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 15 Aug 2008 14:07:51 -0700
Subject: [PATCH 085/869] tg3: Refine APE status check

Recently, more status bits have been added to the APE status register.
This patch refines the status register check so that the driver can
send more events than it would have otherwise.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e3fd74b871a..13640f1cab3 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5495,7 +5495,7 @@ static void tg3_ape_send_event(struct tg3 *tp, u32 event)
 		return;
 
 	apedata = tg3_ape_read32(tp, TG3_APE_FW_STATUS);
-	if (apedata != APE_FW_STATUS_READY)
+	if (!(apedata & APE_FW_STATUS_READY))
 		return;
 
 	/* Wait for up to 1 millisecond for APE to service previous event. */
-- 
GitLab


From 3bda12589646caa22b2ed4ef7cf82d17ea59d7a6 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 15 Aug 2008 14:08:22 -0700
Subject: [PATCH 086/869] tg3: Preserve register settings for DASH

Broadcom's DASH (Desktop and mobile Architecture for System Hardware)
implementation requires that the driver preserve particular register
settings.  If the driver does not preserve them, communication with
the DASH firmware will be lost.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 26 ++++++++++++++++++++++++--
 drivers/net/tg3.h |  2 ++
 2 files changed, 26 insertions(+), 2 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 13640f1cab3..0ebf2ff60c4 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -2126,6 +2126,13 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
 		     (tp->tg3_flags & TG3_FLAG_WOL_ENABLE))
 			mac_mode |= MAC_MODE_MAGIC_PKT_ENABLE;
 
+		if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+			mac_mode |= tp->mac_mode &
+				    (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
+			if (mac_mode & MAC_MODE_APE_TX_EN)
+				mac_mode |= MAC_MODE_TDE_ENABLE;
+		}
+
 		tw32_f(MAC_MODE, mac_mode);
 		udelay(100);
 
@@ -5912,6 +5919,11 @@ static int tg3_chip_reset(struct tg3 *tp)
 	} else if (tp->tg3_flags2 & TG3_FLG2_MII_SERDES) {
 		tp->mac_mode = MAC_MODE_PORT_MODE_GMII;
 		tw32_f(MAC_MODE, tp->mac_mode);
+	} else if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+		tp->mac_mode &= (MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN);
+		if (tp->mac_mode & MAC_MODE_APE_TX_EN)
+			tp->mac_mode |= MAC_MODE_TDE_ENABLE;
+		tw32_f(MAC_MODE, tp->mac_mode);
 	} else
 		tw32_f(MAC_MODE, 0);
 	udelay(40);
@@ -7412,7 +7424,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		udelay(10);
 	}
 
-	tp->mac_mode = MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+		tp->mac_mode &= MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
+	else
+		tp->mac_mode = 0;
+	tp->mac_mode |= MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
 		MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
 	    !(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
@@ -12422,6 +12438,13 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 				       tp->misc_host_ctrl);
 	}
 
+	/* Preserve the APE MAC_MODE bits */
+	if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)
+		tp->mac_mode = tr32(MAC_MODE) |
+			       MAC_MODE_APE_TX_EN | MAC_MODE_APE_RX_EN;
+	else
+		tp->mac_mode = TG3_DEF_MAC_MODE;
+
 	/* these are limited to 10/100 only */
 	if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 &&
 	     (grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) ||
@@ -13281,7 +13304,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	tp->pdev = pdev;
 	tp->dev = dev;
 	tp->pm_cap = pm_cap;
-	tp->mac_mode = TG3_DEF_MAC_MODE;
 	tp->rx_mode = TG3_DEF_RX_MODE;
 	tp->tx_mode = TG3_DEF_TX_MODE;
 
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index dd1af508023..377234947e4 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -325,6 +325,8 @@
 #define  MAC_MODE_TDE_ENABLE		 0x00200000
 #define  MAC_MODE_RDE_ENABLE		 0x00400000
 #define  MAC_MODE_FHDE_ENABLE		 0x00800000
+#define  MAC_MODE_APE_RX_EN		 0x08000000
+#define  MAC_MODE_APE_TX_EN		 0x10000000
 #define MAC_STATUS			0x00000404
 #define  MAC_STATUS_PCS_SYNCED		 0x00000001
 #define  MAC_STATUS_SIGNAL_DET		 0x00000002
-- 
GitLab


From bc7959b2cbb57393b625b423c73e6fd07610257f Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 15 Aug 2008 14:08:55 -0700
Subject: [PATCH 087/869] tg3: Turn off ASF "driver alive" heartbeats for APE

The ENABLE_ASF flag is set when DASH is enabled on the NIC, but DASH
does not run on the RX CPU.  Instead it runs on the APE.
Consequently, the driver does not need to send "driver alive" updates
to the RX CPU when the APE is present.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 0ebf2ff60c4..e952b91ca2a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7862,7 +7862,8 @@ static void tg3_timer(unsigned long __opaque)
 	 * resets.
 	 */
 	if (!--tp->asf_counter) {
-		if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
+		if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
+		    !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
 			u32 val;
 
 			tg3_wait_for_event_ack(tp);
-- 
GitLab


From 4ba526ced990f4d61ee8d65fe8a6f0745e8e455c Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 15 Aug 2008 14:10:04 -0700
Subject: [PATCH 088/869] tg3: Fix firmware event timeouts

The git commit 7c5026aa9b81dd45df8d3f4e0be73e485976a8b6 ("tg3: Add
link state reporting to UMP firmware") introduced code that waits for
previous firmware events to be serviced before attempting to submit a
new event.  Unfortunately that patch contained a bug that cause the
driver to wait 2.5 seconds, rather than 2.5 milliseconds as intended.
This patch fixes that bug.

This bug revealed that not all firmware versions service driver events
though.  Since we do not know which versions of the firmware do and don't
service these events, the driver needs some way to minimize the effects
of the delay.  This patch solves the problem by recording a jiffies
timestamp when it submits an event to the hardware.  If the jiffies
counter shows that 2.5 milliseconds have already passed, a wait is not
needed and the driver can proceed to submit a new event.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 53 +++++++++++++++++++++++++++++++++--------------
 drivers/net/tg3.h |  3 +++
 2 files changed, 40 insertions(+), 16 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e952b91ca2a..c26011eaa2b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1019,16 +1019,44 @@ static void tg3_mdio_fini(struct tg3 *tp)
 	}
 }
 
+/* tp->lock is held. */
+static inline void tg3_generate_fw_event(struct tg3 *tp)
+{
+	u32 val;
+
+	val = tr32(GRC_RX_CPU_EVENT);
+	val |= GRC_RX_CPU_DRIVER_EVENT;
+	tw32_f(GRC_RX_CPU_EVENT, val);
+
+	tp->last_event_jiffies = jiffies;
+}
+
+#define TG3_FW_EVENT_TIMEOUT_USEC 2500
+
 /* tp->lock is held. */
 static void tg3_wait_for_event_ack(struct tg3 *tp)
 {
 	int i;
+	unsigned int delay_cnt;
+	long time_remain;
+
+	/* If enough time has passed, no wait is necessary. */
+	time_remain = (long)(tp->last_event_jiffies + 1 +
+		      usecs_to_jiffies(TG3_FW_EVENT_TIMEOUT_USEC)) -
+		      (long)jiffies;
+	if (time_remain < 0)
+		return;
 
-	/* Wait for up to 2.5 milliseconds */
-	for (i = 0; i < 250000; i++) {
+	/* Check if we can shorten the wait time. */
+	delay_cnt = jiffies_to_usecs(time_remain);
+	if (delay_cnt > TG3_FW_EVENT_TIMEOUT_USEC)
+		delay_cnt = TG3_FW_EVENT_TIMEOUT_USEC;
+	delay_cnt = (delay_cnt >> 3) + 1;
+
+	for (i = 0; i < delay_cnt; i++) {
 		if (!(tr32(GRC_RX_CPU_EVENT) & GRC_RX_CPU_DRIVER_EVENT))
 			break;
-		udelay(10);
+		udelay(8);
 	}
 }
 
@@ -1077,9 +1105,7 @@ static void tg3_ump_link_report(struct tg3 *tp)
 		val = 0;
 	tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX + 12, val);
 
-	val = tr32(GRC_RX_CPU_EVENT);
-	val |= GRC_RX_CPU_DRIVER_EVENT;
-	tw32_f(GRC_RX_CPU_EVENT, val);
+	tg3_generate_fw_event(tp);
 }
 
 static void tg3_link_report(struct tg3 *tp)
@@ -5953,6 +5979,7 @@ static int tg3_chip_reset(struct tg3 *tp)
 		tg3_read_mem(tp, NIC_SRAM_DATA_CFG, &nic_cfg);
 		if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
 			tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
+			tp->last_event_jiffies = jiffies;
 			if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS)
 				tp->tg3_flags2 |= TG3_FLG2_ASF_NEW_HANDSHAKE;
 		}
@@ -5966,15 +5993,12 @@ static void tg3_stop_fw(struct tg3 *tp)
 {
 	if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
 	   !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
-		u32 val;
-
 		/* Wait for RX cpu to ACK the previous event. */
 		tg3_wait_for_event_ack(tp);
 
 		tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX, FWCMD_NICDRV_PAUSE_FW);
-		val = tr32(GRC_RX_CPU_EVENT);
-		val |= GRC_RX_CPU_DRIVER_EVENT;
-		tw32(GRC_RX_CPU_EVENT, val);
+
+		tg3_generate_fw_event(tp);
 
 		/* Wait for RX cpu to ACK this event. */
 		tg3_wait_for_event_ack(tp);
@@ -7864,8 +7888,6 @@ static void tg3_timer(unsigned long __opaque)
 	if (!--tp->asf_counter) {
 		if ((tp->tg3_flags & TG3_FLAG_ENABLE_ASF) &&
 		    !(tp->tg3_flags3 & TG3_FLG3_ENABLE_APE)) {
-			u32 val;
-
 			tg3_wait_for_event_ack(tp);
 
 			tg3_write_mem(tp, NIC_SRAM_FW_CMD_MBOX,
@@ -7873,9 +7895,8 @@ static void tg3_timer(unsigned long __opaque)
 			tg3_write_mem(tp, NIC_SRAM_FW_CMD_LEN_MBOX, 4);
 			/* 5 seconds timeout */
 			tg3_write_mem(tp, NIC_SRAM_FW_CMD_DATA_MBOX, 5);
-			val = tr32(GRC_RX_CPU_EVENT);
-			val |= GRC_RX_CPU_DRIVER_EVENT;
-			tw32_f(GRC_RX_CPU_EVENT, val);
+
+			tg3_generate_fw_event(tp);
 		}
 		tp->asf_counter = tp->asf_multiplier;
 	}
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 377234947e4..f5b8cab8d4b 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2432,7 +2432,10 @@ struct tg3 {
 	struct tg3_ethtool_stats	estats;
 	struct tg3_ethtool_stats	estats_prev;
 
+	union {
 	unsigned long			phy_crc_errors;
+	unsigned long			last_event_jiffies;
+	};
 
 	u32				rx_offset;
 	u32				tg3_flags;
-- 
GitLab


From 816f8b86621000fc82e16ae5f172164de761d5eb Mon Sep 17 00:00:00 2001
From: Stefan Buehler <stbuehler@web.de>
Date: Fri, 15 Aug 2008 14:10:54 -0700
Subject: [PATCH 089/869] tg3: fix 64 bit counter for ethtool stats

Ethtool stats are 64-bits in length.  net_device_stats members are
unsigned long types.  When gathering information for
a get_ethtool_stats call, the driver will call a driver-private,
inlined get_stat64() function, which returns an unsigned long value.
This call will inadvertently mask off the upper 32-bits of a stat on
32-bit machines.

This patch defines a new get_estat() inline function and modifies the
ESTAT_ADD() macro to use it.

Signed-off-by: Stefan Buehler <stbuehler@web.de>
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index c26011eaa2b..ada1d0d1104 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -8466,6 +8466,11 @@ static inline unsigned long get_stat64(tg3_stat64_t *val)
 	return ret;
 }
 
+static inline u64 get_estat64(tg3_stat64_t *val)
+{
+       return ((u64)val->high << 32) | ((u64)val->low);
+}
+
 static unsigned long calc_crc_errors(struct tg3 *tp)
 {
 	struct tg3_hw_stats *hw_stats = tp->hw_stats;
@@ -8494,7 +8499,7 @@ static unsigned long calc_crc_errors(struct tg3 *tp)
 
 #define ESTAT_ADD(member) \
 	estats->member =	old_estats->member + \
-				get_stat64(&hw_stats->member)
+				get_estat64(&hw_stats->member)
 
 static struct tg3_ethtool_stats *tg3_get_estats(struct tg3 *tp)
 {
-- 
GitLab


From 23197916c447a1623d196e6547781180905f0bb2 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Fri, 15 Aug 2008 14:11:19 -0700
Subject: [PATCH 090/869] tg3: Update version to 3.94

This patch updates the version number to 3.94.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tg3.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index ada1d0d1104..71d2c5cfdad 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -66,8 +66,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.93"
-#define DRV_MODULE_RELDATE	"May 22, 2008"
+#define DRV_MODULE_VERSION	"3.94"
+#define DRV_MODULE_RELDATE	"August 14, 2008"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
-- 
GitLab


From 924e61a90f61b1c22fcb51aaf3afc065399cec81 Mon Sep 17 00:00:00 2001
From: Milan Broz <mbroz@redhat.com>
Date: Sat, 16 Aug 2008 02:11:28 +0200
Subject: [PATCH 091/869] ACPI: Fix now signed module parameter.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/processor_perflib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 80e32093e97..80c251ec6d2 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -71,7 +71,7 @@ static DEFINE_MUTEX(performance_mutex);
  *  1 -> ignore _PPC totally -> forced by user through boot param
  */
 static int ignore_ppc = -1;
-module_param(ignore_ppc, uint, 0644);
+module_param(ignore_ppc, int, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 		 "limited by BIOS, this should help");
 
-- 
GitLab


From e4119a43187139736750bad5d694c6a839df045d Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Fri, 15 Aug 2008 19:51:07 -0700
Subject: [PATCH 092/869] bridge: show offload settings

Add more ethtool generic operations to dump the bridge offload
settings.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/br_device.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 9b58d70b0e7..4f52c3d50eb 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -148,11 +148,16 @@ static int br_set_tx_csum(struct net_device *dev, u32 data)
 }
 
 static struct ethtool_ops br_ethtool_ops = {
-	.get_drvinfo = br_getinfo,
-	.get_link = ethtool_op_get_link,
-	.set_sg = br_set_sg,
-	.set_tx_csum = br_set_tx_csum,
-	.set_tso = br_set_tso,
+	.get_drvinfo    = br_getinfo,
+	.get_link	= ethtool_op_get_link,
+	.get_tx_csum	= ethtool_op_get_tx_csum,
+	.set_tx_csum 	= br_set_tx_csum,
+	.get_sg		= ethtool_op_get_sg,
+	.set_sg		= br_set_sg,
+	.get_tso	= ethtool_op_get_tso,
+	.set_tso	= br_set_tso,
+	.get_ufo	= ethtool_op_get_ufo,
+	.get_flags	= ethtool_op_get_flags,
 };
 
 void br_dev_setup(struct net_device *dev)
-- 
GitLab


From f22f8567cb0a530d8958d177e0f268783bd0d894 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 15 Aug 2008 14:52:08 -0700
Subject: [PATCH 093/869] loopback: Enable TSO

This patch enables TSO since the loopback device is naturally
capable of handling packets of any size.  This also means that
we won't enable GSO on lo which is good until GSO is fixed to
preserve netfilter state as netfilter treats loopback packets
in a special way.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/loopback.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 49f6bc036a9..46e87cc8725 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -234,9 +234,7 @@ static void loopback_setup(struct net_device *dev)
 	dev->type		= ARPHRD_LOOPBACK;	/* 0x0001*/
 	dev->flags		= IFF_LOOPBACK;
 	dev->features 		= NETIF_F_SG | NETIF_F_FRAGLIST
-#ifdef LOOPBACK_TSO
 		| NETIF_F_TSO
-#endif
 		| NETIF_F_NO_CSUM
 		| NETIF_F_HIGHDMA
 		| NETIF_F_LLTX
-- 
GitLab


From 7447ef63cf2dfdc444f4c72ae13f604350b2e25f Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 15 Aug 2008 14:54:03 -0700
Subject: [PATCH 094/869] loopback: Remove rest of LOOPBACK_TSO code.

It hasn't been enabled for a long time and the generic GSO
engine is better documentation of what is expected of a
device implementing TSO.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/loopback.c | 62 ------------------------------------------
 1 file changed, 62 deletions(-)

diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 46e87cc8725..489d53be2f5 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -64,68 +64,6 @@ struct pcpu_lstats {
 	unsigned long bytes;
 };
 
-/* KISS: just allocate small chunks and copy bits.
- *
- * So, in fact, this is documentation, explaining what we expect
- * of largesending device modulo TCP checksum, which is ignored for loopback.
- */
-
-#ifdef LOOPBACK_TSO
-static void emulate_large_send_offload(struct sk_buff *skb)
-{
-	struct iphdr *iph = ip_hdr(skb);
-	struct tcphdr *th = (struct tcphdr *)(skb_network_header(skb) +
-					      (iph->ihl * 4));
-	unsigned int doffset = (iph->ihl + th->doff) * 4;
-	unsigned int mtu = skb_shinfo(skb)->gso_size + doffset;
-	unsigned int offset = 0;
-	u32 seq = ntohl(th->seq);
-	u16 id  = ntohs(iph->id);
-
-	while (offset + doffset < skb->len) {
-		unsigned int frag_size = min(mtu, skb->len - offset) - doffset;
-		struct sk_buff *nskb = alloc_skb(mtu + 32, GFP_ATOMIC);
-
-		if (!nskb)
-			break;
-		skb_reserve(nskb, 32);
-		skb_set_mac_header(nskb, -ETH_HLEN);
-		skb_reset_network_header(nskb);
-		iph = ip_hdr(nskb);
-		skb_copy_to_linear_data(nskb, skb_network_header(skb),
-					doffset);
-		if (skb_copy_bits(skb,
-				  doffset + offset,
-				  nskb->data + doffset,
-				  frag_size))
-			BUG();
-		skb_put(nskb, doffset + frag_size);
-		nskb->ip_summed = CHECKSUM_UNNECESSARY;
-		nskb->dev = skb->dev;
-		nskb->priority = skb->priority;
-		nskb->protocol = skb->protocol;
-		nskb->dst = dst_clone(skb->dst);
-		memcpy(nskb->cb, skb->cb, sizeof(skb->cb));
-		nskb->pkt_type = skb->pkt_type;
-
-		th = (struct tcphdr *)(skb_network_header(nskb) + iph->ihl * 4);
-		iph->tot_len = htons(frag_size + doffset);
-		iph->id = htons(id);
-		iph->check = 0;
-		iph->check = ip_fast_csum((unsigned char *) iph, iph->ihl);
-		th->seq = htonl(seq);
-		if (offset + doffset + frag_size < skb->len)
-			th->fin = th->psh = 0;
-		netif_rx(nskb);
-		offset += frag_size;
-		seq += frag_size;
-		id++;
-	}
-
-	dev_kfree_skb(skb);
-}
-#endif /* LOOPBACK_TSO */
-
 /*
  * The higher levels take care of making this non-reentrant (it's
  * called with bh's disabled).
-- 
GitLab


From 6f85a124d819e1cf33b16d064a6a656fd448a735 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 15 Aug 2008 14:55:02 -0700
Subject: [PATCH 095/869] net: Preserve netfilter attributes in skb_gso_segment
 using __copy_skb_header

skb_gso_segment didn't preserve some attributes in the original skb
such as the netfilter fields.  This was harmless until they were used
which is the case for packets going through lo.

This patch makes it call __copy_skb_header which also picks up some
other missing attributes.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/skbuff.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 84640172d65..ca1ccdf1ef7 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -2256,14 +2256,7 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 			segs = nskb;
 		tail = nskb;
 
-		nskb->dev = skb->dev;
-		skb_copy_queue_mapping(nskb, skb);
-		nskb->priority = skb->priority;
-		nskb->protocol = skb->protocol;
-		nskb->vlan_tci = skb->vlan_tci;
-		nskb->dst = dst_clone(skb->dst);
-		memcpy(nskb->cb, skb->cb, sizeof(skb->cb));
-		nskb->pkt_type = skb->pkt_type;
+		__copy_skb_header(nskb, skb);
 		nskb->mac_len = skb->mac_len;
 
 		skb_reserve(nskb, headroom);
@@ -2274,6 +2267,7 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 		skb_copy_from_linear_data(skb, skb_put(nskb, doffset),
 					  doffset);
 		if (!sg) {
+			nskb->ip_summed = CHECKSUM_NONE;
 			nskb->csum = skb_copy_and_csum_bits(skb, offset,
 							    skb_put(nskb, len),
 							    len, 0);
@@ -2283,8 +2277,6 @@ struct sk_buff *skb_segment(struct sk_buff *skb, int features)
 		frag = skb_shinfo(nskb)->frags;
 		k = 0;
 
-		nskb->ip_summed = CHECKSUM_PARTIAL;
-		nskb->csum = skb->csum;
 		skb_copy_from_linear_data_offset(skb, offset,
 						 skb_put(nskb, hsize), hsize);
 
-- 
GitLab


From 04a0551c87363f100b04d28d7a15a632b70e18e7 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 15 Aug 2008 14:56:37 -0700
Subject: [PATCH 096/869] loopback: Drop obsolete ip_summed setting

Now that the network stack can handle inbound packets with partial
checksums, we should no longer clobber the ip_summed field in the
loopback driver.  This is because CHECKSUM_UNNECESSARY implies that
the checksum field is actually valid which is not true for loopback
packets since it's only partial (and thus complemented).

This allows packets from lo to then be SNATed to an external source
while still preserving the checksum's validity.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/loopback.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 489d53be2f5..3b43bfd85a0 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -75,9 +75,6 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
 	skb_orphan(skb);
 
 	skb->protocol = eth_type_trans(skb,dev);
-#ifndef LOOPBACK_MUST_CHECKSUM
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-#endif
 
 #ifdef LOOPBACK_TSO
 	if (skb_is_gso(skb)) {
-- 
GitLab


From e3b99556975907530aeb9745e7b3945a0da48f17 Mon Sep 17 00:00:00 2001
From: Mark McLoughlin <markmc@redhat.com>
Date: Fri, 15 Aug 2008 15:09:56 -0700
Subject: [PATCH 097/869] tun: TUNGETIFF interface to query name and flags

Add a TUNGETIFF interface so that userspace can query a
tun/tap descriptor for its name and flags.

This is needed because it is common for one app to create
a tap interface, exec another app and pass it the file
descriptor for the interface. Without TUNGETIFF the spawned
app has no way of detecting wheter the interface has e.g.
IFF_VNET_HDR set.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Acked-by: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tun.c      | 39 +++++++++++++++++++++++++++++++++++++++
 include/linux/if_tun.h |  1 +
 2 files changed, 40 insertions(+)

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index e6bbc639c2d..95931a5a988 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -748,6 +748,36 @@ static int tun_set_iff(struct net *net, struct file *file, struct ifreq *ifr)
 	return err;
 }
 
+static int tun_get_iff(struct net *net, struct file *file, struct ifreq *ifr)
+{
+	struct tun_struct *tun = file->private_data;
+
+	if (!tun)
+		return -EBADFD;
+
+	DBG(KERN_INFO "%s: tun_get_iff\n", tun->dev->name);
+
+	strcpy(ifr->ifr_name, tun->dev->name);
+
+	ifr->ifr_flags = 0;
+
+	if (ifr->ifr_flags & TUN_TUN_DEV)
+		ifr->ifr_flags |= IFF_TUN;
+	else
+		ifr->ifr_flags |= IFF_TAP;
+
+	if (tun->flags & TUN_NO_PI)
+		ifr->ifr_flags |= IFF_NO_PI;
+
+	if (tun->flags & TUN_ONE_QUEUE)
+		ifr->ifr_flags |= IFF_ONE_QUEUE;
+
+	if (tun->flags & TUN_VNET_HDR)
+		ifr->ifr_flags |= IFF_VNET_HDR;
+
+	return 0;
+}
+
 /* This is like a cut-down ethtool ops, except done via tun fd so no
  * privs required. */
 static int set_offload(struct net_device *dev, unsigned long arg)
@@ -833,6 +863,15 @@ static int tun_chr_ioctl(struct inode *inode, struct file *file,
 	DBG(KERN_INFO "%s: tun_chr_ioctl cmd %d\n", tun->dev->name, cmd);
 
 	switch (cmd) {
+	case TUNGETIFF:
+		ret = tun_get_iff(current->nsproxy->net_ns, file, &ifr);
+		if (ret)
+			return ret;
+
+		if (copy_to_user(argp, &ifr, sizeof(ifr)))
+			return -EFAULT;
+		break;
+
 	case TUNSETNOCSUM:
 		/* Disable/Enable checksum */
 		if (arg)
diff --git a/include/linux/if_tun.h b/include/linux/if_tun.h
index 4c6307ad9fd..8529f57ba26 100644
--- a/include/linux/if_tun.h
+++ b/include/linux/if_tun.h
@@ -45,6 +45,7 @@
 #define TUNGETFEATURES _IOR('T', 207, unsigned int)
 #define TUNSETOFFLOAD  _IOW('T', 208, unsigned int)
 #define TUNSETTXFILTER _IOW('T', 209, unsigned int)
+#define TUNGETIFF      _IOR('T', 210, unsigned int)
 
 /* TUNSETIFF ifr flags */
 #define IFF_TUN		0x0001
-- 
GitLab


From db543c1f973cd1d557cc32ceee76737c1e4d2898 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 15 Aug 2008 15:13:53 -0700
Subject: [PATCH 098/869] net: skb_copy_datagram_from_iovec()

There's an skb_copy_datagram_iovec() to copy out of a paged skb, but
nothing the other way around (because we don't do that).

We want to allocate big skbs in tun.c, so let's add the function.
It's a carbon copy of skb_copy_datagram_iovec() with enough changes to
be annoying.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/skbuff.h |  4 ++
 net/core/datagram.c    | 87 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 91 insertions(+)

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 358661c9990..90992371783 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -1452,6 +1452,10 @@ extern int	       skb_copy_datagram_iovec(const struct sk_buff *from,
 extern int	       skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
 							int hlen,
 							struct iovec *iov);
+extern int	       skb_copy_datagram_from_iovec(struct sk_buff *skb,
+						    int offset,
+						    struct iovec *from,
+						    int len);
 extern void	       skb_free_datagram(struct sock *sk, struct sk_buff *skb);
 extern int	       skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
 					 unsigned int flags);
diff --git a/net/core/datagram.c b/net/core/datagram.c
index dd61dcad601..52f577a0f54 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -339,6 +339,93 @@ fault:
 	return -EFAULT;
 }
 
+/**
+ *	skb_copy_datagram_from_iovec - Copy a datagram from an iovec.
+ *	@skb: buffer to copy
+ *	@offset: offset in the buffer to start copying to
+ *	@from: io vector to copy to
+ *	@len: amount of data to copy to buffer from iovec
+ *
+ *	Returns 0 or -EFAULT.
+ *	Note: the iovec is modified during the copy.
+ */
+int skb_copy_datagram_from_iovec(struct sk_buff *skb, int offset,
+				 struct iovec *from, int len)
+{
+	int start = skb_headlen(skb);
+	int i, copy = start - offset;
+
+	/* Copy header. */
+	if (copy > 0) {
+		if (copy > len)
+			copy = len;
+		if (memcpy_fromiovec(skb->data + offset, from, copy))
+			goto fault;
+		if ((len -= copy) == 0)
+			return 0;
+		offset += copy;
+	}
+
+	/* Copy paged appendix. Hmm... why does this look so complicated? */
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		int end;
+
+		WARN_ON(start > offset + len);
+
+		end = start + skb_shinfo(skb)->frags[i].size;
+		if ((copy = end - offset) > 0) {
+			int err;
+			u8  *vaddr;
+			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+			struct page *page = frag->page;
+
+			if (copy > len)
+				copy = len;
+			vaddr = kmap(page);
+			err = memcpy_fromiovec(vaddr + frag->page_offset +
+					       offset - start, from, copy);
+			kunmap(page);
+			if (err)
+				goto fault;
+
+			if (!(len -= copy))
+				return 0;
+			offset += copy;
+		}
+		start = end;
+	}
+
+	if (skb_shinfo(skb)->frag_list) {
+		struct sk_buff *list = skb_shinfo(skb)->frag_list;
+
+		for (; list; list = list->next) {
+			int end;
+
+			WARN_ON(start > offset + len);
+
+			end = start + list->len;
+			if ((copy = end - offset) > 0) {
+				if (copy > len)
+					copy = len;
+				if (skb_copy_datagram_from_iovec(list,
+								 offset - start,
+								 from, copy))
+					goto fault;
+				if ((len -= copy) == 0)
+					return 0;
+				offset += copy;
+			}
+			start = end;
+		}
+	}
+	if (!len)
+		return 0;
+
+fault:
+	return -EFAULT;
+}
+EXPORT_SYMBOL(skb_copy_datagram_from_iovec);
+
 static int skb_copy_and_csum_datagram(const struct sk_buff *skb, int offset,
 				      u8 __user *to, int len,
 				      __wsum *csump)
-- 
GitLab


From f42157cb568c1eb02eca7df4da67553a9edae24a Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Fri, 15 Aug 2008 15:15:10 -0700
Subject: [PATCH 099/869] tun: fallback if skb_alloc() fails on big packets

skb_alloc produces linear packets (using kmalloc()).  That can fail,
so should we fall back to making paged skbs.

My original version of this patch always allocate paged skbs for big
packets.  But that made performance drop from 8.4 seconds to 8.8
seconds on 1G lguest->Host TCP xmit.  So now we only do that as a
fallback.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Max Krasnyansky <maxk@qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/tun.c | 66 ++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 62 insertions(+), 4 deletions(-)

diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 95931a5a988..6daea0c9186 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -358,6 +358,66 @@ static unsigned int tun_chr_poll(struct file *file, poll_table * wait)
 	return mask;
 }
 
+/* prepad is the amount to reserve at front.  len is length after that.
+ * linear is a hint as to how much to copy (usually headers). */
+static struct sk_buff *tun_alloc_skb(size_t prepad, size_t len, size_t linear,
+				     gfp_t gfp)
+{
+	struct sk_buff *skb;
+	unsigned int i;
+
+	skb = alloc_skb(prepad + len, gfp|__GFP_NOWARN);
+	if (skb) {
+		skb_reserve(skb, prepad);
+		skb_put(skb, len);
+		return skb;
+	}
+
+	/* Under a page?  Don't bother with paged skb. */
+	if (prepad + len < PAGE_SIZE)
+		return NULL;
+
+	/* Start with a normal skb, and add pages. */
+	skb = alloc_skb(prepad + linear, gfp);
+	if (!skb)
+		return NULL;
+
+	skb_reserve(skb, prepad);
+	skb_put(skb, linear);
+
+	len -= linear;
+
+	for (i = 0; i < MAX_SKB_FRAGS; i++) {
+		skb_frag_t *f = &skb_shinfo(skb)->frags[i];
+
+		f->page = alloc_page(gfp|__GFP_ZERO);
+		if (!f->page)
+			break;
+
+		f->page_offset = 0;
+		f->size = PAGE_SIZE;
+
+		skb->data_len += PAGE_SIZE;
+		skb->len += PAGE_SIZE;
+		skb->truesize += PAGE_SIZE;
+		skb_shinfo(skb)->nr_frags++;
+
+		if (len < PAGE_SIZE) {
+			len = 0;
+			break;
+		}
+		len -= PAGE_SIZE;
+	}
+
+	/* Too large, or alloc fail? */
+	if (unlikely(len)) {
+		kfree_skb(skb);
+		skb = NULL;
+	}
+
+	return skb;
+}
+
 /* Get packet from user space buffer */
 static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv, size_t count)
 {
@@ -391,14 +451,12 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv,
 			return -EINVAL;
 	}
 
-	if (!(skb = alloc_skb(len + align, GFP_KERNEL))) {
+	if (!(skb = tun_alloc_skb(align, len, gso.hdr_len, GFP_KERNEL))) {
 		tun->dev->stats.rx_dropped++;
 		return -ENOMEM;
 	}
 
-	if (align)
-		skb_reserve(skb, align);
-	if (memcpy_fromiovec(skb_put(skb, len), iv, len)) {
+	if (skb_copy_datagram_from_iovec(skb, 0, iv, len)) {
 		tun->dev->stats.rx_dropped++;
 		kfree_skb(skb);
 		return -EFAULT;
-- 
GitLab


From 08013fa353fdcfc0a03cae805393abfc56722387 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 15 Aug 2008 19:46:01 -0700
Subject: [PATCH 100/869] bnx2: Fix build with VLAN_8021Q disabled.

Reported by Randy Dunlap.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index d4548101e49..2486a656f12 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -35,8 +35,8 @@
 #include <linux/time.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
-#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 #include <linux/if_vlan.h>
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 #define BCM_VLAN 1
 #endif
 #include <net/ip.h>
-- 
GitLab


From 06f579dee5dd75c2aaf8fe83d034b5470eeee2f4 Mon Sep 17 00:00:00 2001
From: "Yang, Bo" <Bo.Yang@lsi.com>
Date: Sun, 10 Aug 2008 12:42:37 -0700
Subject: [PATCH 101/869] [SCSI] megaraid_sas: add readl to force PCI posting
 flush

MegaRAID SAS Driver get unexpected Interrupt.  Add the dummy readl to
force PCI flush will fix this issue.

Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/megaraid/megaraid_sas.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index fc7ac158476..d7b99843ca3 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -198,6 +198,9 @@ megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs)
 	 */
 	writel(status, &regs->outbound_intr_status);
 
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_status);
+
 	return 0;
 }
 
@@ -293,6 +296,9 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs)
 	 */
 	writel(status, &regs->outbound_doorbell_clear);
 
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_doorbell_clear);
+
 	return 0;
 }
 /**
-- 
GitLab


From 530e6fc1e05f14762aea954ca8d6422c5a7077c1 Mon Sep 17 00:00:00 2001
From: "Yang, Bo" <Bo.Yang@lsi.com>
Date: Sun, 10 Aug 2008 12:42:37 -0700
Subject: [PATCH 102/869] [SCSI] megaraid_sas: add the shutdown DCMD cmd to
 driver shutdown routine

Add the shutdown DCMD cmd to driver shutdown routine to make megaraid sas
FW shutdown proper.

Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/megaraid/megaraid_sas.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index d7b99843ca3..e880cd450e0 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -2863,6 +2863,7 @@ static void megasas_shutdown(struct pci_dev *pdev)
 {
 	struct megasas_instance *instance = pci_get_drvdata(pdev);
 	megasas_flush_cache(instance);
+	megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN);
 }
 
 /**
-- 
GitLab


From 6610a6b354d6c3377a1e79cd1d760ffe4358245c Mon Sep 17 00:00:00 2001
From: "Yang, Bo" <Bo.Yang@lsi.com>
Date: Sun, 10 Aug 2008 12:42:38 -0700
Subject: [PATCH 103/869] [SCSI] megaraid_sas: add new controllers (0x78 0x79)

Add the new controllers (0x78 0x79) support to the driver.  Those
controllers are LSI's next generation (gen2) SAS controllers.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: parenthesise a macro]
Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/megaraid/megaraid_sas.c | 110 ++++++++++++++++++++++++++-
 drivers/scsi/megaraid/megaraid_sas.h |   4 +
 2 files changed, 112 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index e880cd450e0..870dc1c6302 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_sas.c
- * Version	: v00.00.03.20-rc1
+ * Version     : v00.00.04.01-rc1
  *
  * Authors:
  *	(email-id : megaraidlinux@lsi.com)
@@ -71,6 +71,10 @@ static struct pci_device_id megasas_pci_table[] = {
 	/* ppc IOP */
 	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
 	/* ppc IOP */
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
+	/* gen2*/
+	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
+	/* gen2*/
 	{PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
 	/* xscale IOP, vega */
 	{PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
@@ -323,6 +327,99 @@ static struct megasas_instance_template megasas_instance_template_ppc = {
 	.read_fw_status_reg = megasas_read_fw_status_reg_ppc,
 };
 
+/**
+*	The following functions are defined for gen2 (deviceid : 0x78 0x79)
+*	controllers
+*/
+
+/**
+ * megasas_enable_intr_gen2 -  Enables interrupts
+ * @regs:                      MFI register set
+ */
+static inline void
+megasas_enable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+	writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+	/* write ~0x00000005 (4 & 1) to the intr mask*/
+	writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_gen2 - Disables interrupt
+ * @regs:                      MFI register set
+ */
+static inline void
+megasas_disable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+	u32 mask = 0xFFFFFFFF;
+	writel(mask, &regs->outbound_intr_mask);
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_gen2 - returns the current FW status value
+ * @regs:                      MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
+{
+	return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_gen2 -      Check & clear interrupt
+ * @regs:                              MFI register set
+ */
+static int
+megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+	u32 status;
+	/*
+	 * Check if it is our interrupt
+	 */
+	status = readl(&regs->outbound_intr_status);
+
+	if (!(status & MFI_GEN2_ENABLE_INTERRUPT_MASK))
+		return 1;
+
+	/*
+	 * Clear the interrupt by writing back the same value
+	 */
+	writel(status, &regs->outbound_doorbell_clear);
+
+	/* Dummy readl to force pci flush */
+	readl(&regs->outbound_intr_status);
+
+	return 0;
+}
+/**
+ * megasas_fire_cmd_gen2 -     Sends command to the FW
+ * @frame_phys_addr :          Physical address of cmd
+ * @frame_count :              Number of frames for the command
+ * @regs :                     MFI register set
+ */
+static inline void
+megasas_fire_cmd_gen2(dma_addr_t frame_phys_addr, u32 frame_count,
+			struct megasas_register_set __iomem *regs)
+{
+	writel((frame_phys_addr | (frame_count<<1))|1,
+			&(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_gen2 = {
+
+	.fire_cmd = megasas_fire_cmd_gen2,
+	.enable_intr = megasas_enable_intr_gen2,
+	.disable_intr = megasas_disable_intr_gen2,
+	.clear_intr = megasas_clear_intr_gen2,
+	.read_fw_status_reg = megasas_read_fw_status_reg_gen2,
+};
+
 /**
 *	This is the end of set of functions & definitions
 * 	specific to ppc (deviceid : 0x60) controllers
@@ -1982,7 +2079,12 @@ static int megasas_init_mfi(struct megasas_instance *instance)
 	/*
 	 * Map the message registers
 	 */
-	instance->base_addr = pci_resource_start(instance->pdev, 0);
+	if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
+		(instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
+		instance->base_addr = pci_resource_start(instance->pdev, 1);
+	} else {
+		instance->base_addr = pci_resource_start(instance->pdev, 0);
+	}
 
 	if (pci_request_regions(instance->pdev, "megasas: LSI")) {
 		printk(KERN_DEBUG "megasas: IO memory region busy!\n");
@@ -2004,6 +2106,10 @@ static int megasas_init_mfi(struct megasas_instance *instance)
 		case PCI_DEVICE_ID_LSI_SAS1078DE:
 			instance->instancet = &megasas_instance_template_ppc;
 			break;
+		case PCI_DEVICE_ID_LSI_SAS1078GEN2:
+		case PCI_DEVICE_ID_LSI_SAS0079GEN2:
+			instance->instancet = &megasas_instance_template_gen2;
+			break;
 		case PCI_DEVICE_ID_LSI_SAS1064R:
 		case PCI_DEVICE_ID_DELL_PERC5:
 		default:
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index b0c41e67170..7072ff2cec0 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -28,6 +28,8 @@
 #define	PCI_DEVICE_ID_LSI_SAS1078R		0x0060
 #define	PCI_DEVICE_ID_LSI_SAS1078DE		0x007C
 #define	PCI_DEVICE_ID_LSI_VERDE_ZCR		0x0413
+#define	PCI_DEVICE_ID_LSI_SAS1078GEN2		0x0078
+#define	PCI_DEVICE_ID_LSI_SAS0079GEN2		0x0079
 
 /*
  * =====================================
@@ -580,6 +582,8 @@ struct megasas_ctrl_info {
 #define MEGASAS_COMPLETION_TIMER_INTERVAL      (HZ/10)
 
 #define MFI_REPLY_1078_MESSAGE_INTERRUPT	0x80000000
+#define MFI_REPLY_GEN2_MESSAGE_INTERRUPT	0x00000001
+#define MFI_GEN2_ENABLE_INTERRUPT_MASK		(0x00000001 | 0x00000004)
 
 /*
 * register set for both 1068 and 1078 controllers
-- 
GitLab


From 24541f99ba7231de26355d1cb87ab06e0f593efb Mon Sep 17 00:00:00 2001
From: "Yang, Bo" <Bo.Yang@lsi.com>
Date: Sun, 10 Aug 2008 12:42:39 -0700
Subject: [PATCH 104/869] [SCSI] megaraid_sas: version and Documentation Update

Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 Documentation/scsi/ChangeLog.megaraid_sas | 23 +++++++++++++++++++++++
 drivers/scsi/megaraid/megaraid_sas.h      |  6 +++---
 2 files changed, 26 insertions(+), 3 deletions(-)

diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 716fcc1cafb..c851ef49779 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,26 @@
+
+1 Release Date    : Thur.July. 24 11:41:51 PST 2008 -
+                       (emaild-id:megaraidlinux@lsi.com)
+                       Sumant Patro
+                       Bo Yang
+
+2 Current Version : 00.00.04.01
+3 Older Version   : 00.00.03.22
+
+1. Add the new controller (0078, 0079) support to the driver
+       Those controllers are LSI's next generatation(gen2) SAS controllers.
+
+1 Release Date    : Mon.June. 23 10:12:45 PST 2008 -
+                       (emaild-id:megaraidlinux@lsi.com)
+                       Sumant Patro
+                       Bo Yang
+
+2 Current Version : 00.00.03.22
+3 Older Version   : 00.00.03.20
+
+1. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper.
+2. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue.
+
 1 Release Date    : Mon. March 10 11:02:31 PDT 2008 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Sumant Patro
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 7072ff2cec0..0d033248fdf 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -18,9 +18,9 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION			"00.00.03.20-rc1"
-#define MEGASAS_RELDATE			"March 10, 2008"
-#define MEGASAS_EXT_VERSION		"Mon. March 10 11:02:31 PDT 2008"
+#define MEGASAS_VERSION				"00.00.04.01"
+#define MEGASAS_RELDATE				"July 24, 2008"
+#define MEGASAS_EXT_VERSION			"Thu July 24 11:41:51 PST 2008"
 
 /*
  * Device IDs
-- 
GitLab


From 8479fca119fac63538af9e313ad0b8658cbbe662 Mon Sep 17 00:00:00 2001
From: Chandra Seetharaman <sekharan@us.ibm.com>
Date: Tue, 12 Aug 2008 17:26:58 -0700
Subject: [PATCH 105/869] [SCSI] scsi_dh: Do not use scsilun in rdac hardware
 handler

RDAC storage controller doesn't seem to use the scsilun format. It uses
only the last byte for LUN.

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/device_handler/scsi_dh_rdac.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index b093a501f8a..86365461a1c 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -376,7 +376,7 @@ static int get_lun(struct scsi_device *sdev, struct rdac_dh_data *h)
 		if (inqp->page_id[0] != 'e' || inqp->page_id[1] != 'd' ||
 		    inqp->page_id[2] != 'i' || inqp->page_id[3] != 'd')
 			return SCSI_DH_NOSYS;
-		h->lun = scsilun_to_int((struct scsi_lun *)inqp->lun);
+		h->lun = inqp->lun[7]; /* Uses only the last byte */
 	}
 	return err;
 }
-- 
GitLab


From fe42625cdf0d4e06f01e365897a64b68d7f7de7d Mon Sep 17 00:00:00 2001
From: Chandra Seetharaman <sekharan@us.ibm.com>
Date: Tue, 12 Aug 2008 17:26:59 -0700
Subject: [PATCH 106/869] [SCSI] scsi_dh: Initialize lun_state in
 check_ownership()

lun_state need to be initialized inside check_ownership().

Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/device_handler/scsi_dh_rdac.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 86365461a1c..518da832ad2 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -386,6 +386,7 @@ static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h)
 	int err;
 	struct c9_inquiry *inqp;
 
+	h->lun_state = RDAC_LUN_UNOWNED;
 	err = submit_inquiry(sdev, 0xC9, sizeof(struct c9_inquiry), h);
 	if (err == SCSI_DH_OK) {
 		inqp = &h->inq.c9;
-- 
GitLab


From 6390d1f33faecf48e31f27dd7dbe928540f8acfc Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Aug 2008 21:36:56 -0700
Subject: [PATCH 107/869] [SCSI] qla2xxx: Correct synchronization of
 software/firmware fcport states.

Greg Wettstein (greg@enjellic.com) noted:

	http://article.gmane.org/gmane.linux.scsi/43409

on a reboot of a previously recognized SCST target, the initiator
driver would be unable to re-recognize the device as a target.
It turns out that prior to the SCST software reloading and
returning it's "target-capable" abilities in the PRLI payload,
the HBA would be re-initialized as an initiator-only type port.
Since initiators typically classify themselves as an FCP-2
capable device, both software and firmware do not perform an
explicit logout during port-loss.  Unfortunately, as can be seen
by the failure case, when the port (now target-capable) returns,
firmware performs an ADISC without a follow-on PRLI, leaving
stale 'initiator-only' data in the firmware's port database.

Correct the discrepancy by performing the explicit logout during
the transport's request to terminate-rport-io, thus synchronizing
port states and ensuring a follow-on PRLI is performed.

Reported-by: Greg Wettstein <greg@enjellic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_attr.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index a319a20ed44..45e7dcb4b34 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -993,6 +993,17 @@ qla2x00_terminate_rport_io(struct fc_rport *rport)
 {
 	fc_port_t *fcport = *(fc_port_t **)rport->dd_data;
 
+	/*
+	 * At this point all fcport's software-states are cleared.  Perform any
+	 * final cleanup of firmware resources (PCBs and XCBs).
+	 */
+	if (fcport->loop_id != FC_NO_LOOP_ID) {
+		fcport->ha->isp_ops->fabric_logout(fcport->ha, fcport->loop_id,
+		    fcport->d_id.b.domain, fcport->d_id.b.area,
+		    fcport->d_id.b.al_pa);
+		fcport->loop_id = FC_NO_LOOP_ID;
+	}
+
 	qla2x00_abort_fcport_cmds(fcport);
 	scsi_target_unblock(&rport->dev);
 }
-- 
GitLab


From a7a28504bfa61dc6caa495f55c52623d10b42b32 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Aug 2008 21:36:57 -0700
Subject: [PATCH 108/869] [SCSI] qla2xxx: Correct vport-state management issues
 during ISP-ABORT.

* Use correct 'ha' to mark a device lost from ISR.
  I/Os will always be returned on the physical-HA.
  qla2x00_mark_device_lost() should be called with the HA bound
  to the fcport.
* Mark *all* devices lost during ISP-ABORT (bighammer).

These fixes correct issues discovered locally where during
link-perturbation and heavy vport-I/O fcport/rport states would
stray and an rport's scsi-target lost (timed-out).

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 3 +++
 drivers/scsi/qla2xxx/qla_isr.c  | 7 +++----
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 601a6b29750..e1de7a696bf 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3251,6 +3251,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 {
 	int rval;
 	uint8_t        status = 0;
+	scsi_qla_host_t *vha;
 
 	if (ha->flags.online) {
 		ha->flags.online = 0;
@@ -3265,6 +3266,8 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 		if (atomic_read(&ha->loop_state) != LOOP_DOWN) {
 			atomic_set(&ha->loop_state, LOOP_DOWN);
 			qla2x00_mark_all_devices_lost(ha, 0);
+			list_for_each_entry(vha, &ha->vp_list, vp_list)
+			       qla2x00_mark_all_devices_lost(vha, 0);
 		} else {
 			if (!atomic_read(&ha->loop_down_timer))
 				atomic_set(&ha->loop_down_timer,
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 874d802edb7..d6a1a6627b5 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1184,9 +1184,8 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
 		    atomic_read(&fcport->state)));
 
 		cp->result = DID_BUS_BUSY << 16;
-		if (atomic_read(&fcport->state) == FCS_ONLINE) {
-			qla2x00_mark_device_lost(ha, fcport, 1, 1);
-		}
+		if (atomic_read(&fcport->state) == FCS_ONLINE)
+			qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
 		break;
 
 	case CS_RESET:
@@ -1229,7 +1228,7 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt)
 
 		/* Check to see if logout occurred. */
 		if ((le16_to_cpu(sts->status_flags) & SF_LOGOUT_SENT))
-			qla2x00_mark_device_lost(ha, fcport, 1, 1);
+			qla2x00_mark_device_lost(fcport->ha, fcport, 1, 1);
 		break;
 
 	default:
-- 
GitLab


From bed475c4cde5d12f537f445bdd0a5a3bb5684481 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Aug 2008 21:36:58 -0700
Subject: [PATCH 109/869] [SCSI] qla2xxx: Don't leak SG-DMA mappings while
 aborting commands.

Original code inadvertently cleared an SRB's 'flags' while
aborting; causing a follow-on scsi_dma_unmap() to be potentially
missed.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_os.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 7c8af7ed2a5..c2092addb86 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1080,9 +1080,7 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *ha, int res)
 		sp = ha->outstanding_cmds[cnt];
 		if (sp) {
 			ha->outstanding_cmds[cnt] = NULL;
-			sp->flags = 0;
 			sp->cmd->result = res;
-			sp->cmd->host_scribble = (unsigned char *)NULL;
 			qla2x00_sp_compl(ha, sp);
 		}
 	}
-- 
GitLab


From 946fb8915a47bbd76de75b2ae7f1c7e92c0666ca Mon Sep 17 00:00:00 2001
From: Mike Hernandez <mike.hernandez@qlogic.com>
Date: Wed, 13 Aug 2008 21:36:59 -0700
Subject: [PATCH 110/869] [SCSI] qla2xxx: Set npiv_supported flag for FCoE
 HBAs.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_init.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index e1de7a696bf..ee89ddd64aa 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -976,8 +976,9 @@ qla2x00_setup_chip(scsi_qla_host_t *ha)
 				    &ha->fw_attributes, &ha->fw_memory_size);
 				qla2x00_resize_request_q(ha);
 				ha->flags.npiv_supported = 0;
-				if ((IS_QLA24XX(ha) || IS_QLA25XX(ha)) &&
-				    (ha->fw_attributes & BIT_2)) {
+				if ((IS_QLA24XX(ha) || IS_QLA25XX(ha) ||
+				     IS_QLA84XX(ha)) &&
+					 (ha->fw_attributes & BIT_2)) {
 					ha->flags.npiv_supported = 1;
 					if ((!ha->max_npiv_vports) ||
 					    ((ha->max_npiv_vports + 1) %
-- 
GitLab


From 19851f136ab37d7ac6f7c865329d13db54712ec0 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Aug 2008 21:37:00 -0700
Subject: [PATCH 111/869] [SCSI] qla2xxx: Reference proper ha during SBR
 handling.

The executing-HA of an SRB can be referenced from the sp->fcport.
Use this correct value while processing status-continuation data
and abort processing.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_isr.c | 7 ++++---
 drivers/scsi/qla2xxx/qla_os.c  | 3 ++-
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d6a1a6627b5..45a3b93eed5 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -879,11 +879,12 @@ qla2x00_handle_sense(srb_t *sp, uint8_t *sense_data, uint32_t sense_len)
 	sp->request_sense_ptr += sense_len;
 	sp->request_sense_length -= sense_len;
 	if (sp->request_sense_length != 0)
-		sp->ha->status_srb = sp;
+		sp->fcport->ha->status_srb = sp;
 
 	DEBUG5(printk("%s(): Check condition Sense data, scsi(%ld:%d:%d:%d) "
-	    "cmd=%p pid=%ld\n", __func__, sp->ha->host_no, cp->device->channel,
-	    cp->device->id, cp->device->lun, cp, cp->serial_number));
+	    "cmd=%p pid=%ld\n", __func__, sp->fcport->ha->host_no,
+	    cp->device->channel, cp->device->id, cp->device->lun, cp,
+	    cp->serial_number));
 	if (sense_len)
 		DEBUG5(qla2x00_dump_buffer(cp->sense_buffer,
 		    CMD_ACTUAL_SNSLEN(cp)));
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index c2092addb86..e0880ad243b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -780,7 +780,8 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha, unsigned int t,
 		sp = pha->outstanding_cmds[cnt];
 		if (!sp)
 			continue;
-		if (ha->vp_idx != sp->ha->vp_idx)
+
+		if (ha->vp_idx != sp->fcport->ha->vp_idx)
 			continue;
 		match = 0;
 		switch (type) {
-- 
GitLab


From c795c1e4b68a74536f0fb18744d0e381ceb1f37e Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Aug 2008 21:37:01 -0700
Subject: [PATCH 112/869] [SCSI] qla2xxx: Explicitly tear-down vports during
 PCI remove_one().

During internal testing, we've seen issues (hangs) with the
'deferred' vport tear-down-processing typically accompanied with
the fc_remove_host() call.  This is due to the current
implementation's back-end vport handling being performed by the
physical-HA's DPC thread where premature shutdown could lead to
latent vport requests without a processor.

This should also address a problem reported by Gal Rosen
(http://marc.info/?l=linux-scsi&m=121731664417358&w=2) where the
driver would attempt to awaken a previously torn-down DPC thread
from interrupt context by implicitly calling wake_up_process()
rather than the driver's qla2xxx_wake_dpc() helper.  Rather, than
reshuffle the remove_one() device-removal code, during unload,
depend on the driver's timer to wake-up the DPC process, by
limiting wake-ups based on an 'unloading' flag.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_def.h |  1 +
 drivers/scsi/qla2xxx/qla_mbx.c |  2 +-
 drivers/scsi/qla2xxx/qla_os.c  | 13 ++++++++++---
 3 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 6da31ba9440..94a720eabfd 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2237,6 +2237,7 @@ typedef struct scsi_qla_host {
 #define REGISTER_FDMI_NEEDED	26
 #define FCPORT_UPDATE_NEEDED	27
 #define VP_DPC_NEEDED		28	/* wake up for VP dpc handling */
+#define UNLOADING		29
 
 	uint32_t	device_flags;
 #define DFLG_LOCAL_DEVICES		BIT_0
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index bc90d6b8d0a..813bc7784c0 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2686,7 +2686,7 @@ qla24xx_report_id_acquisition(scsi_qla_host_t *ha,
 		set_bit(VP_IDX_ACQUIRED, &vha->vp_flags);
 		set_bit(VP_DPC_NEEDED, &ha->dpc_flags);
 
-		wake_up_process(ha->dpc_thread);
+		qla2xxx_wake_dpc(ha);
 	}
 }
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e0880ad243b..26afe44265c 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1775,10 +1775,15 @@ probe_out:
 static void
 qla2x00_remove_one(struct pci_dev *pdev)
 {
-	scsi_qla_host_t *ha;
+	scsi_qla_host_t *ha, *vha, *temp;
 
 	ha = pci_get_drvdata(pdev);
 
+	list_for_each_entry_safe(vha, temp, &ha->vp_list, vp_list)
+		fc_vport_terminate(vha->fc_vport);
+
+	set_bit(UNLOADING, &ha->dpc_flags);
+
 	qla2x00_dfs_remove(ha);
 
 	qla84xx_put_chip(ha);
@@ -2450,8 +2455,10 @@ qla2x00_do_dpc(void *data)
 void
 qla2xxx_wake_dpc(scsi_qla_host_t *ha)
 {
-	if (ha->dpc_thread)
-		wake_up_process(ha->dpc_thread);
+	struct task_struct *t = ha->dpc_thread;
+
+	if (!test_bit(UNLOADING, &ha->dpc_flags) && t)
+		wake_up_process(t);
 }
 
 /*
-- 
GitLab


From bcd2361d7eda10f85a103cbe70f7eebaeef03072 Mon Sep 17 00:00:00 2001
From: Andrew Vasquez <andrew.vasquez@qlogic.com>
Date: Wed, 13 Aug 2008 21:37:02 -0700
Subject: [PATCH 113/869] [SCSI] qla2xxx: Update version number to 8.02.01-k7.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/qla2xxx/qla_version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 676c390db35..4160e4caa7b 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.02.01-k6"
+#define QLA2XXX_VERSION      "8.02.01-k7"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	2
-- 
GitLab


From 66dca9b8c50b5e59d3bea8b21cee5c6dae6c9c46 Mon Sep 17 00:00:00 2001
From: Joe Malicki <jmalicki@metacarta.com>
Date: Thu, 14 Aug 2008 17:14:48 -0400
Subject: [PATCH 114/869] [SCSI] megaraid_sas: remove sysfs dbg_lvl world
 writeable permissions

/sys/bus/pci/drivers/megaraid_sas/dbg_lvl defaults to being
world-writable, which seems bad (letting any user affect kernel driver
behavior and logging level).

This turns off group and user write permissions, so that on typical
production systems only root can write to it.

[jejb: fix up rejections]
Signed-off-by: Joseph Malicki <jmalicki@metacarta.com>
Acked-by: "Yang, Bo" <Bo.Yang@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/megaraid/megaraid_sas.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 870dc1c6302..97b763378e7 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -3405,7 +3405,7 @@ megasas_sysfs_set_dbg_lvl(struct device_driver *dd, const char *buf, size_t coun
 	return retval;
 }
 
-static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUGO, megasas_sysfs_show_dbg_lvl,
+static DRIVER_ATTR(dbg_lvl, S_IRUGO|S_IWUSR, megasas_sysfs_show_dbg_lvl,
 		megasas_sysfs_set_dbg_lvl);
 
 static ssize_t
-- 
GitLab


From 004dd5e88673516a408f0e8e43edbe6a4424be2f Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Fri, 15 Aug 2008 10:48:47 -0500
Subject: [PATCH 115/869] [SCSI] ibmvscsi: Fixup desired DMA value for shared
 memory partitions

When running ibmvscsi in a shared memory partition, it must provide
a default value for the amount of DMA resources it will need in order to
perform reasonably well. This was being calculated in sectors rather than
bytes, as it should. This patch fixes this.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index 6b24b9cdb04..7b1502c0ab6 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1636,7 +1636,7 @@ static unsigned long ibmvscsi_get_desired_dma(struct vio_dev *vdev)
 	unsigned long desired_io = max_requests * sizeof(union viosrp_iu);
 
 	/* add io space for sg data */
-	desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT *
+	desired_io += (IBMVSCSI_MAX_SECTORS_DEFAULT * 512 *
 	                     IBMVSCSI_CMDS_PER_LUN_DEFAULT);
 
 	return desired_io;
-- 
GitLab


From 3eddc569770a76f2ca65621cdde3c0a2552b5b0c Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Fri, 15 Aug 2008 10:59:21 -0500
Subject: [PATCH 116/869] [SCSI] ibmvfc: Fix another hang on module removal

This fixes a hang on module removal. The module removal code was setting
the hosts's state to IBMVFC_HOST_OFFLINE before tearing down the kernel
thread, but, due to a bug in ibmvfc_wait_while_resetting, was not waiting
for the kernel thread's offlining work to be done prior to destroying
the kernel thread, which left the scsi host in a blocked state which we
never got out of.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ae560bc04f9..ee11568d581 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1059,9 +1059,10 @@ static void ibmvfc_get_starget_port_id(struct scsi_target *starget)
 static int ibmvfc_wait_while_resetting(struct ibmvfc_host *vhost)
 {
 	long timeout = wait_event_timeout(vhost->init_wait_q,
-					  (vhost->state == IBMVFC_ACTIVE ||
-					   vhost->state == IBMVFC_HOST_OFFLINE ||
-					   vhost->state == IBMVFC_LINK_DEAD),
+					  ((vhost->state == IBMVFC_ACTIVE ||
+					    vhost->state == IBMVFC_HOST_OFFLINE ||
+					    vhost->state == IBMVFC_LINK_DEAD) &&
+					   vhost->action == IBMVFC_HOST_ACTION_NONE),
 					  (init_timeout * HZ));
 
 	return timeout ? 0 : -EIO;
-- 
GitLab


From 915be024414c52e311f795566ac938223ba3c847 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Fri, 15 Aug 2008 10:59:22 -0500
Subject: [PATCH 117/869] [SCSI] ibmvfc: Fixup host state during reinit

If an ELS is received while the virtual fibre channel adapter is going
through its discovery, a flag is set which causes discovery to get
re-driven. However, the hosts's state does not get set back to
IBMVFC_INITIALIZING and scsi_block_requests does not get called again,
which can result in queuecommand ops getting sent during
discovery. This should not occur and may cause problems. One example
is that we may no longer be logged into the target we send the command
to, resulting in a failure which should not have occurred.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ee11568d581..406ab27f80e 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -3602,8 +3602,9 @@ static void ibmvfc_do_work(struct ibmvfc_host *vhost)
 			}
 		}
 
-		if (vhost->reinit) {
+		if (vhost->reinit && !ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
 			vhost->reinit = 0;
+			scsi_block_requests(vhost->host);
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_QUERY);
 		} else {
 			ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_NONE);
-- 
GitLab


From cf6f10d794ab4a9bd84fce345c3947588670d5f5 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Fri, 15 Aug 2008 10:59:23 -0500
Subject: [PATCH 118/869] [SCSI] ibmvfc: Fix for lost async events

If the client virtual fibre channel adapter is already logged into the
server and does an NPIV Login again, the async queue, which is used for
reporting Link Up/Link Down type of events, does not get reset on the
server side. Fix up the client driver so that we also do not reset it.
This fixes a problem of lost async events following relogins.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 406ab27f80e..58f8c9e39ae 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -556,11 +556,12 @@ static void ibmvfc_link_down(struct ibmvfc_host *vhost,
 /**
  * ibmvfc_init_host - Start host initialization
  * @vhost:		ibmvfc host struct
+ * @relogin:	is this a re-login?
  *
  * Return value:
  *	nothing
  **/
-static void ibmvfc_init_host(struct ibmvfc_host *vhost)
+static void ibmvfc_init_host(struct ibmvfc_host *vhost, int relogin)
 {
 	struct ibmvfc_target *tgt;
 
@@ -574,6 +575,11 @@ static void ibmvfc_init_host(struct ibmvfc_host *vhost)
 	}
 
 	if (!ibmvfc_set_host_state(vhost, IBMVFC_INITIALIZING)) {
+		if (!relogin) {
+			memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
+			vhost->async_crq.cur = 0;
+		}
+
 		list_for_each_entry(tgt, &vhost->targets, queue)
 			tgt->need_login = 1;
 		scsi_block_requests(vhost->host);
@@ -2084,11 +2090,11 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 	case IBMVFC_AE_LINK_UP:
 	case IBMVFC_AE_RESUME:
 		vhost->events_to_log |= IBMVFC_AE_LINKUP;
-		ibmvfc_init_host(vhost);
+		ibmvfc_init_host(vhost, 1);
 		break;
 	case IBMVFC_AE_SCN_FABRIC:
 		vhost->events_to_log |= IBMVFC_AE_RSCN;
-		ibmvfc_init_host(vhost);
+		ibmvfc_init_host(vhost, 1);
 		break;
 	case IBMVFC_AE_SCN_NPORT:
 	case IBMVFC_AE_SCN_GROUP:
@@ -2134,13 +2140,13 @@ static void ibmvfc_handle_crq(struct ibmvfc_crq *crq, struct ibmvfc_host *vhost)
 			/* Send back a response */
 			rc = ibmvfc_send_crq_init_complete(vhost);
 			if (rc == 0)
-				ibmvfc_init_host(vhost);
+				ibmvfc_init_host(vhost, 0);
 			else
 				dev_err(vhost->dev, "Unable to send init rsp. rc=%ld\n", rc);
 			break;
 		case IBMVFC_CRQ_INIT_COMPLETE:
 			dev_info(vhost->dev, "Partner initialization complete\n");
-			ibmvfc_init_host(vhost);
+			ibmvfc_init_host(vhost, 0);
 			break;
 		default:
 			dev_err(vhost->dev, "Unknown crq message type: %d\n", crq->format);
@@ -3358,8 +3364,6 @@ static void ibmvfc_npiv_login(struct ibmvfc_host *vhost)
 	mad->buffer.va = vhost->login_buf_dma;
 	mad->buffer.len = sizeof(*vhost->login_buf);
 
-	memset(vhost->async_crq.msgs, 0, PAGE_SIZE);
-	vhost->async_crq.cur = 0;
 	ibmvfc_set_host_action(vhost, IBMVFC_HOST_ACTION_INIT_WAIT);
 
 	if (!ibmvfc_send_event(evt, vhost, default_timeout))
-- 
GitLab


From 2bac406df52100aec42e230a2cc2986d34e86218 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Fri, 15 Aug 2008 10:59:26 -0500
Subject: [PATCH 119/869] [SCSI] ibmvfc: Sanitize response lengths

Sanitize the response lengths in order to prevent possible oopses
in the command response path.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 58f8c9e39ae..6ecc0ddd444 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -1457,8 +1457,8 @@ static void ibmvfc_scsi_done(struct ibmvfc_event *evt)
 	struct ibmvfc_cmd *vfc_cmd = &evt->xfer_iu->cmd;
 	struct ibmvfc_fcp_rsp *rsp = &vfc_cmd->rsp;
 	struct scsi_cmnd *cmnd = evt->cmnd;
-	int rsp_len = 0;
-	int sense_len = rsp->fcp_sense_len;
+	u32 rsp_len = 0;
+	u32 sense_len = rsp->fcp_sense_len;
 
 	if (cmnd) {
 		if (vfc_cmd->response_flags & IBMVFC_ADAPTER_RESID_VALID)
@@ -1475,7 +1475,7 @@ static void ibmvfc_scsi_done(struct ibmvfc_event *evt)
 				rsp_len = rsp->fcp_rsp_len;
 			if ((sense_len + rsp_len) > SCSI_SENSE_BUFFERSIZE)
 				sense_len = SCSI_SENSE_BUFFERSIZE - rsp_len;
-			if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len)
+			if ((rsp->flags & FCP_SNS_LEN_VALID) && rsp->fcp_sense_len && rsp_len <= 8)
 				memcpy(cmnd->sense_buffer, rsp->data.sense + rsp_len, sense_len);
 
 			ibmvfc_log_error(evt);
-- 
GitLab


From 3e3399467d4c4aefe6a24225b5b277cf7d6e58a7 Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Fri, 15 Aug 2008 10:59:27 -0500
Subject: [PATCH 120/869] [SCSI] ibmvfc: Add details to async event log

When logging async events, also print the payload in addition to the
event received.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 6ecc0ddd444..4e0b7c8eb32 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -2084,7 +2084,8 @@ static void ibmvfc_handle_async(struct ibmvfc_async_crq *crq,
 {
 	const char *desc = ibmvfc_get_ae_desc(crq->event);
 
-	ibmvfc_log(vhost, 3, "%s event received\n", desc);
+	ibmvfc_log(vhost, 3, "%s event received. scsi_id: %lx, wwpn: %lx,"
+		   " node_name: %lx\n", desc, crq->scsi_id, crq->wwpn, crq->node_name);
 
 	switch (crq->event) {
 	case IBMVFC_AE_LINK_UP:
-- 
GitLab


From 7d0e367ab3f3ad345bd3e121c4c5f511e8b274fa Mon Sep 17 00:00:00 2001
From: Brian King <brking@linux.vnet.ibm.com>
Date: Fri, 15 Aug 2008 10:59:28 -0500
Subject: [PATCH 121/869] [SCSI] ibmvfc: Driver version 1.0.2

Bump driver version to 1.0.2.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.h b/drivers/scsi/ibmvscsi/ibmvfc.h
index 4bf6e374f07..fb3177ab669 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.h
+++ b/drivers/scsi/ibmvscsi/ibmvfc.h
@@ -29,8 +29,8 @@
 #include "viosrp.h"
 
 #define IBMVFC_NAME	"ibmvfc"
-#define IBMVFC_DRIVER_VERSION		"1.0.1"
-#define IBMVFC_DRIVER_DATE		"(July 11, 2008)"
+#define IBMVFC_DRIVER_VERSION		"1.0.2"
+#define IBMVFC_DRIVER_DATE		"(August 14, 2008)"
 
 #define IBMVFC_DEFAULT_TIMEOUT	15
 #define IBMVFC_INIT_TIMEOUT		30
-- 
GitLab


From 1371c893ff9de0d57fa5b5cf0255d66b8849e13d Mon Sep 17 00:00:00 2001
From: Ming Ling <ming.m.lin@intel.com>
Date: Mon, 18 Aug 2008 04:14:59 +0200
Subject: [PATCH 122/869] ACPI: Change package length error to warning

The condition is harmless and no need to scare the user

http://bugzilla.kernel.org/show_bug.cgi?id=11245

Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/dispatcher/dsobject.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/dispatcher/dsobject.c b/drivers/acpi/dispatcher/dsobject.c
index 1022e38994c..0f280589921 100644
--- a/drivers/acpi/dispatcher/dsobject.c
+++ b/drivers/acpi/dispatcher/dsobject.c
@@ -496,7 +496,7 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
 			arg = arg->common.next;
 		}
 
-		ACPI_ERROR((AE_INFO,
+		ACPI_WARNING((AE_INFO,
 			    "Package List length (%X) larger than NumElements count (%X), truncated\n",
 			    i, element_count));
 	} else if (i < element_count) {
-- 
GitLab


From a9312ae89324438b0edc554eb36c3ec6bf927d04 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sun, 17 Aug 2008 21:51:03 -0700
Subject: [PATCH 123/869] pkt_sched: Add 'deactivated' state.

This new state lets dev_deactivate() mark a qdisc as having been
deactivated.

dev_queue_xmit() and ing_filter() check for this bit and do not
try to process the qdisc if the bit is set.

dev_deactivate() polls the qdisc after setting the bit, waiting
for both __QDISC_STATE_RUNNING and __QDISC_STATE_SCHED to clear.

This isn't perfect yet, but subsequent changesets will make it so.
This part is just one piece of the puzzle.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/sch_generic.h | 1 +
 net/core/dev.c            | 9 ++++++++-
 net/sched/sch_generic.c   | 6 ++++++
 3 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index a7abfda3e44..757ab087adb 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -27,6 +27,7 @@ enum qdisc_state_t
 {
 	__QDISC_STATE_RUNNING,
 	__QDISC_STATE_SCHED,
+	__QDISC_STATE_DEACTIVATED,
 };
 
 struct qdisc_size_table {
diff --git a/net/core/dev.c b/net/core/dev.c
index 600bb23c4c2..d9e31f63ade 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1800,6 +1800,12 @@ gso:
 
 		spin_lock(root_lock);
 
+		if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) {
+			spin_unlock(root_lock);
+			rc = NET_XMIT_DROP;
+			goto out_kfree_skb;
+		}
+
 		rc = qdisc_enqueue_root(skb, q);
 		qdisc_run(q);
 
@@ -2084,7 +2090,8 @@ static int ing_filter(struct sk_buff *skb)
 	q = rxq->qdisc;
 	if (q != &noop_qdisc) {
 		spin_lock(qdisc_lock(q));
-		result = qdisc_enqueue_root(skb, q);
+		if (likely(!test_bit(__QDISC_STATE_DEACTIVATED, &q->state)))
+			result = qdisc_enqueue_root(skb, q);
 		spin_unlock(qdisc_lock(q));
 	}
 
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 468574682ca..ff1c4557e5f 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -597,6 +597,9 @@ static void transition_one_qdisc(struct net_device *dev,
 	struct Qdisc *new_qdisc = dev_queue->qdisc_sleeping;
 	int *need_watchdog_p = _need_watchdog;
 
+	if (!(new_qdisc->flags & TCQ_F_BUILTIN))
+		clear_bit(__QDISC_STATE_DEACTIVATED, &new_qdisc->state);
+
 	rcu_assign_pointer(dev_queue->qdisc, new_qdisc);
 	if (need_watchdog_p && new_qdisc != &noqueue_qdisc)
 		*need_watchdog_p = 1;
@@ -640,6 +643,9 @@ static void dev_deactivate_queue(struct net_device *dev,
 	if (qdisc) {
 		spin_lock_bh(qdisc_lock(qdisc));
 
+		if (!(qdisc->flags & TCQ_F_BUILTIN))
+			set_bit(__QDISC_STATE_DEACTIVATED, &qdisc->state);
+
 		dev_queue->qdisc = qdisc_default;
 		qdisc_reset(qdisc);
 
-- 
GitLab


From def82a1db1fdc4f861c77009e2ee86870c3743b0 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Sun, 17 Aug 2008 21:54:43 -0700
Subject: [PATCH 124/869] net: Change handling of the __QDISC_STATE_SCHED flag
 in net_tx_action().

Change handling of the __QDISC_STATE_SCHED flag in net_tx_action() to
enable proper control in dev_deactivate(). Now, if this flag is seen
as unset under root_lock means a qdisc can't be netif_scheduled.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c | 34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index d9e31f63ade..819f0175bdc 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1339,19 +1339,23 @@ static void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
 }
 
 
-void __netif_schedule(struct Qdisc *q)
+static inline void __netif_reschedule(struct Qdisc *q)
 {
-	if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state)) {
-		struct softnet_data *sd;
-		unsigned long flags;
+	struct softnet_data *sd;
+	unsigned long flags;
 
-		local_irq_save(flags);
-		sd = &__get_cpu_var(softnet_data);
-		q->next_sched = sd->output_queue;
-		sd->output_queue = q;
-		raise_softirq_irqoff(NET_TX_SOFTIRQ);
-		local_irq_restore(flags);
-	}
+	local_irq_save(flags);
+	sd = &__get_cpu_var(softnet_data);
+	q->next_sched = sd->output_queue;
+	sd->output_queue = q;
+	raise_softirq_irqoff(NET_TX_SOFTIRQ);
+	local_irq_restore(flags);
+}
+
+void __netif_schedule(struct Qdisc *q)
+{
+	if (!test_and_set_bit(__QDISC_STATE_SCHED, &q->state))
+		__netif_reschedule(q);
 }
 EXPORT_SYMBOL(__netif_schedule);
 
@@ -1980,15 +1984,15 @@ static void net_tx_action(struct softirq_action *h)
 
 			head = head->next_sched;
 
-			smp_mb__before_clear_bit();
-			clear_bit(__QDISC_STATE_SCHED, &q->state);
-
 			root_lock = qdisc_lock(q);
 			if (spin_trylock(root_lock)) {
+				smp_mb__before_clear_bit();
+				clear_bit(__QDISC_STATE_SCHED,
+					  &q->state);
 				qdisc_run(q);
 				spin_unlock(root_lock);
 			} else {
-				__netif_schedule(q);
+				__netif_reschedule(q);
 			}
 		}
 	}
-- 
GitLab


From 4335cd2da1e8986fa8aff21a91144d986cb0a5fc Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sun, 17 Aug 2008 21:58:07 -0700
Subject: [PATCH 125/869] pkt_sched: Simplify dev_deactivate() polling loop.

The condition under which the previous qdisc has no more references
after we've attached &noop_qdisc is that both RUNNING and SCHED
are both seen clear while holding the root lock.

So just make specifically that check in the polling loop, instead
of this overly complex "check without then check with lock held"
sequence.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_generic.c | 31 +++++--------------------------
 1 file changed, 5 insertions(+), 26 deletions(-)

diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index ff1c4557e5f..30b76aec723 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -653,7 +653,7 @@ static void dev_deactivate_queue(struct net_device *dev,
 	}
 }
 
-static bool some_qdisc_is_busy(struct net_device *dev, int lock)
+static bool some_qdisc_is_busy(struct net_device *dev)
 {
 	unsigned int i;
 
@@ -667,14 +667,12 @@ static bool some_qdisc_is_busy(struct net_device *dev, int lock)
 		q = dev_queue->qdisc_sleeping;
 		root_lock = qdisc_lock(q);
 
-		if (lock)
-			spin_lock_bh(root_lock);
+		spin_lock_bh(root_lock);
 
 		val = (test_bit(__QDISC_STATE_RUNNING, &q->state) ||
 		       test_bit(__QDISC_STATE_SCHED, &q->state));
 
-		if (lock)
-			spin_unlock_bh(root_lock);
+		spin_unlock_bh(root_lock);
 
 		if (val)
 			return true;
@@ -684,8 +682,6 @@ static bool some_qdisc_is_busy(struct net_device *dev, int lock)
 
 void dev_deactivate(struct net_device *dev)
 {
-	bool running;
-
 	netdev_for_each_tx_queue(dev, dev_deactivate_queue, &noop_qdisc);
 	dev_deactivate_queue(dev, &dev->rx_queue, &noop_qdisc);
 
@@ -695,25 +691,8 @@ void dev_deactivate(struct net_device *dev)
 	synchronize_rcu();
 
 	/* Wait for outstanding qdisc_run calls. */
-	do {
-		while (some_qdisc_is_busy(dev, 0))
-			yield();
-
-		/*
-		 * Double-check inside queue lock to ensure that all effects
-		 * of the queue run are visible when we return.
-		 */
-		running = some_qdisc_is_busy(dev, 1);
-
-		/*
-		 * The running flag should never be set at this point because
-		 * we've already set dev->qdisc to noop_qdisc *inside* the same
-		 * pair of spin locks.  That is, if any qdisc_run starts after
-		 * our initial test it should see the noop_qdisc and then
-		 * clear the RUNNING bit before dropping the queue lock.  So
-		 * if it is set here then we've found a bug.
-		 */
-	} while (WARN_ON_ONCE(running));
+	while (some_qdisc_is_busy(dev))
+		yield();
 }
 
 static void dev_init_scheduler_queue(struct net_device *dev,
-- 
GitLab


From 3a76e3716b4e571f5d91a20b6afb412560599083 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Sun, 17 Aug 2008 22:02:11 -0700
Subject: [PATCH 126/869] pkt_sched: Grab correct lock in notify_and_destroy().

From: Jarek Poplawski <jarkao2@gmail.com>

When we are destroying non-root qdiscs, we need to lock
the root of the qdisc tree not the the qdisc itself.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_api.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index c25465e5607..c8dc72e1210 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -638,9 +638,9 @@ static void notify_and_destroy(struct sk_buff *skb, struct nlmsghdr *n, u32 clid
 		qdisc_notify(skb, n, clid, old, new);
 
 	if (old) {
-		spin_lock_bh(&old->q.lock);
+		sch_tree_lock(old);
 		qdisc_destroy(old);
-		spin_unlock_bh(&old->q.lock);
+		sch_tree_unlock(old);
 	}
 }
 
-- 
GitLab


From 1e0d5a5747772182d1bb2525d8153da640fdfb58 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sun, 17 Aug 2008 22:31:26 -0700
Subject: [PATCH 127/869] pkt_sched: No longer destroy qdiscs from RCU.

We can now kill them synchronously with all of the
previous dev_deactivate() cures.

This makes netdev destruction and shutdown saner as
the qdiscs hold references to the device.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/sch_generic.h |  1 -
 net/sched/sch_generic.c   | 27 +++++++++------------------
 2 files changed, 9 insertions(+), 19 deletions(-)

diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 757ab087adb..84d25f2e618 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -61,7 +61,6 @@ struct Qdisc
 	struct gnet_stats_basic	bstats;
 	struct gnet_stats_queue	qstats;
 	struct gnet_stats_rate_est	rate_est;
-	struct rcu_head 	q_rcu;
 	int			(*reshape_fail)(struct sk_buff *skb,
 					struct Qdisc *q);
 
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 30b76aec723..6f96b7bc080 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -518,14 +518,19 @@ void qdisc_reset(struct Qdisc *qdisc)
 }
 EXPORT_SYMBOL(qdisc_reset);
 
-/* this is the rcu callback function to clean up a qdisc when there
- * are no further references to it */
+/* Under qdisc_lock(qdisc) and BH! */
 
-static void __qdisc_destroy(struct rcu_head *head)
+void qdisc_destroy(struct Qdisc *qdisc)
 {
-	struct Qdisc *qdisc = container_of(head, struct Qdisc, q_rcu);
 	const struct Qdisc_ops  *ops = qdisc->ops;
 
+	if (qdisc->flags & TCQ_F_BUILTIN ||
+	    !atomic_dec_and_test(&qdisc->refcnt))
+		return;
+
+	if (qdisc->parent)
+		list_del(&qdisc->list);
+
 #ifdef CONFIG_NET_SCHED
 	qdisc_put_stab(qdisc->stab);
 #endif
@@ -542,20 +547,6 @@ static void __qdisc_destroy(struct rcu_head *head)
 
 	kfree((char *) qdisc - qdisc->padded);
 }
-
-/* Under qdisc_lock(qdisc) and BH! */
-
-void qdisc_destroy(struct Qdisc *qdisc)
-{
-	if (qdisc->flags & TCQ_F_BUILTIN ||
-	    !atomic_dec_and_test(&qdisc->refcnt))
-		return;
-
-	if (qdisc->parent)
-		list_del(&qdisc->list);
-
-	call_rcu(&qdisc->q_rcu, __qdisc_destroy);
-}
 EXPORT_SYMBOL(qdisc_destroy);
 
 static bool dev_all_qdisc_sleeping_noop(struct net_device *dev)
-- 
GitLab


From 0d40b6e564bad2047b57a9afc48b701ef3243b89 Mon Sep 17 00:00:00 2001
From: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Date: Sun, 17 Aug 2008 22:43:56 -0700
Subject: [PATCH 128/869] sch_prio: Use return value from inner qdisc requeue

Use return value from inner qdisc requeue when value returned isn't
NET_XMIT_SUCCESS, instead of always returning NET_XMIT_DROP.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_prio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index eac197610ed..7cdc3e6b31e 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -117,7 +117,7 @@ prio_requeue(struct sk_buff *skb, struct Qdisc* sch)
 	}
 	if (net_xmit_drop_count(ret))
 		sch->qstats.drops++;
-	return NET_XMIT_DROP;
+	return ret;
 }
 
 
-- 
GitLab


From 4cf7cb280e4fcfcd7ae7429e17d798d3a44087af Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sun, 17 Aug 2008 22:45:17 -0700
Subject: [PATCH 129/869] sch_prio: Use NET_XMIT_SUCCESS instead of "0"
 constant.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_prio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c
index 7cdc3e6b31e..a6697c686c7 100644
--- a/net/sched/sch_prio.c
+++ b/net/sched/sch_prio.c
@@ -113,7 +113,7 @@ prio_requeue(struct sk_buff *skb, struct Qdisc* sch)
 	if ((ret = qdisc->ops->requeue(skb, qdisc)) == NET_XMIT_SUCCESS) {
 		sch->q.qlen++;
 		sch->qstats.requeues++;
-		return 0;
+		return NET_XMIT_SUCCESS;
 	}
 	if (net_xmit_drop_count(ret))
 		sch->qstats.drops++;
-- 
GitLab


From 13601cd8e44aab332cedff1d6dc10786ec890b7b Mon Sep 17 00:00:00 2001
From: Yang Hongyang <yanghy@cn.fujitsu.com>
Date: Sun, 17 Aug 2008 23:21:52 -0700
Subject: [PATCH 130/869] ipv6: Fix the return interface index when get it
 while no message is received.

When get receiving interface index while no message is received,
the bounded device's index of the socket should be returned.

RFC 3542:
   Issuing getsockopt() for the above options will return the sticky
   option value i.e., the value set with setsockopt().  If no sticky
   option value has been set getsockopt() will return the following
   values:

   -  For the IPV6_PKTINFO option, it will return an in6_pktinfo
      structure with ipi6_addr being in6addr_any and ipi6_ifindex being
      zero.

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/ipv6_sockglue.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 741cfcd96f8..4e5eac301f9 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -911,7 +911,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
 		} else {
 			if (np->rxopt.bits.rxinfo) {
 				struct in6_pktinfo src_info;
-				src_info.ipi6_ifindex = np->mcast_oif;
+				src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif : sk->sk_bound_dev_if;
 				ipv6_addr_copy(&src_info.ipi6_addr, &np->daddr);
 				put_cmsg(&msg, SOL_IPV6, IPV6_PKTINFO, sizeof(src_info), &src_info);
 			}
@@ -921,7 +921,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
 			}
 			if (np->rxopt.bits.rxoinfo) {
 				struct in6_pktinfo src_info;
-				src_info.ipi6_ifindex = np->mcast_oif;
+				src_info.ipi6_ifindex = np->mcast_oif ? np->mcast_oif : sk->sk_bound_dev_if;
 				ipv6_addr_copy(&src_info.ipi6_addr, &np->daddr);
 				put_cmsg(&msg, SOL_IPV6, IPV6_2292PKTINFO, sizeof(src_info), &src_info);
 			}
-- 
GitLab


From 96d203169d1d851ac1468f7d4459a09581be364c Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sun, 17 Aug 2008 23:37:16 -0700
Subject: [PATCH 131/869] pkt_sched: Fix missed RCU unlock in dev_queue_xmit()

Noticed by Jarek Poplawski.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 819f0175bdc..8d133802372 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1805,14 +1805,12 @@ gso:
 		spin_lock(root_lock);
 
 		if (unlikely(test_bit(__QDISC_STATE_DEACTIVATED, &q->state))) {
-			spin_unlock(root_lock);
+			kfree_skb(skb);
 			rc = NET_XMIT_DROP;
-			goto out_kfree_skb;
+		} else {
+			rc = qdisc_enqueue_root(skb, q);
+			qdisc_run(q);
 		}
-
-		rc = qdisc_enqueue_root(skb, q);
-		qdisc_run(q);
-
 		spin_unlock(root_lock);
 
 		goto out;
-- 
GitLab


From 613e5f3376e48bd48494cf780b79b97b057d49a7 Mon Sep 17 00:00:00 2001
From: Milan Broz <mbroz@redhat.com>
Date: Sat, 16 Aug 2008 02:11:28 +0200
Subject: [PATCH 132/869] ACPI: Fix now signed module parameter.

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/processor_perflib.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 80e32093e97..80c251ec6d2 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -71,7 +71,7 @@ static DEFINE_MUTEX(performance_mutex);
  *  1 -> ignore _PPC totally -> forced by user through boot param
  */
 static int ignore_ppc = -1;
-module_param(ignore_ppc, uint, 0644);
+module_param(ignore_ppc, int, 0644);
 MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \
 		 "limited by BIOS, this should help");
 
-- 
GitLab


From 69747650c814a8a79fef412c7416adf823293a3e Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sun, 17 Aug 2008 23:55:36 -0700
Subject: [PATCH 133/869] pkt_sched: Fix return value corruption in HTB and
 TBF.

Based upon a bug report by Josip Rodin.

Packet schedulers should only return NET_XMIT_DROP iff
the packet really was dropped.  If the packet does reach
the device after we return NET_XMIT_DROP then TCP can
crash because it depends upon the enqueue path return
values being accurate.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_htb.c |  4 ++--
 net/sched/sch_tbf.c | 11 ++---------
 2 files changed, 4 insertions(+), 11 deletions(-)

diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 6febd245e62..0df0df202ed 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -577,7 +577,7 @@ static int htb_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 			sch->qstats.drops++;
 			cl->qstats.drops++;
 		}
-		return NET_XMIT_DROP;
+		return ret;
 	} else {
 		cl->bstats.packets +=
 			skb_is_gso(skb)?skb_shinfo(skb)->gso_segs:1;
@@ -623,7 +623,7 @@ static int htb_requeue(struct sk_buff *skb, struct Qdisc *sch)
 			sch->qstats.drops++;
 			cl->qstats.drops++;
 		}
-		return NET_XMIT_DROP;
+		return ret;
 	} else
 		htb_activate(q, cl);
 
diff --git a/net/sched/sch_tbf.c b/net/sched/sch_tbf.c
index 7d3b7ff3bf0..94c61598b86 100644
--- a/net/sched/sch_tbf.c
+++ b/net/sched/sch_tbf.c
@@ -123,15 +123,8 @@ static int tbf_enqueue(struct sk_buff *skb, struct Qdisc* sch)
 	struct tbf_sched_data *q = qdisc_priv(sch);
 	int ret;
 
-	if (qdisc_pkt_len(skb) > q->max_size) {
-		sch->qstats.drops++;
-#ifdef CONFIG_NET_CLS_ACT
-		if (sch->reshape_fail == NULL || sch->reshape_fail(skb, sch))
-#endif
-			kfree_skb(skb);
-
-		return NET_XMIT_DROP;
-	}
+	if (qdisc_pkt_len(skb) > q->max_size)
+		return qdisc_reshape_fail(skb, sch);
 
 	ret = qdisc_enqueue(skb, q->qdisc);
 	if (ret != 0) {
-- 
GitLab


From 9bfa35fe422c74882e27cc54450a5f76c96aad68 Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Mon, 18 Aug 2008 13:23:52 +0200
Subject: [PATCH 134/869] [Bluetooth] Add SCO support to btusb driver

The new generic driver for Bluetooth USB devices was missing proper
SCO support. The driver now claims the second interface for these USB
devices to allow the flow of SCO packets. It also handles switching
of the alternate setting and re-submission of isochronous URBs.

The btusb driver is now a full replacement for hci_usb and thus the
experimental tag has been removed and this driver is promoted as
preferred one.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 drivers/bluetooth/Kconfig |  10 +-
 drivers/bluetooth/btusb.c | 282 ++++++++++++++++++++++++++++++++++++--
 2 files changed, 272 insertions(+), 20 deletions(-)

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index a235ca78746..7cb4029a537 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -3,8 +3,8 @@ menu "Bluetooth device drivers"
 	depends on BT
 
 config BT_HCIUSB
-	tristate "HCI USB driver"
-	depends on USB
+	tristate "HCI USB driver (old version)"
+	depends on USB && BT_HCIBTUSB=n
 	help
 	  Bluetooth HCI USB driver.
 	  This driver is required if you want to use Bluetooth devices with
@@ -23,15 +23,13 @@ config BT_HCIUSB_SCO
 	  Say Y here to compile support for SCO over HCI USB.
 
 config BT_HCIBTUSB
-	tristate "HCI USB driver (alternate version)"
-	depends on USB && EXPERIMENTAL && BT_HCIUSB=n
+	tristate "HCI USB driver"
+	depends on USB
 	help
 	  Bluetooth HCI USB driver.
 	  This driver is required if you want to use Bluetooth devices with
 	  USB interface.
 
-          This driver is still experimental and has no SCO support.
-
 	  Say Y here to compile support for Bluetooth USB devices into the
 	  kernel or say M to compile it as module (btusb).
 
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 95ae9ba5661..6a010681ecf 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2,7 +2,7 @@
  *
  *  Generic Bluetooth USB driver
  *
- *  Copyright (C) 2005-2007  Marcel Holtmann <marcel@holtmann.org>
+ *  Copyright (C) 2005-2008  Marcel Holtmann <marcel@holtmann.org>
  *
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -41,7 +41,7 @@
 #define BT_DBG(D...)
 #endif
 
-#define VERSION "0.2"
+#define VERSION "0.3"
 
 static int ignore_dga;
 static int ignore_csr;
@@ -160,12 +160,16 @@ static struct usb_device_id blacklist_table[] = {
 	{ }	/* Terminating entry */
 };
 
+#define BTUSB_MAX_ISOC_FRAMES	10
+
 #define BTUSB_INTR_RUNNING	0
 #define BTUSB_BULK_RUNNING	1
+#define BTUSB_ISOC_RUNNING	2
 
 struct btusb_data {
 	struct hci_dev       *hdev;
 	struct usb_device    *udev;
+	struct usb_interface *isoc;
 
 	spinlock_t lock;
 
@@ -176,10 +180,15 @@ struct btusb_data {
 	struct usb_anchor tx_anchor;
 	struct usb_anchor intr_anchor;
 	struct usb_anchor bulk_anchor;
+	struct usb_anchor isoc_anchor;
 
 	struct usb_endpoint_descriptor *intr_ep;
 	struct usb_endpoint_descriptor *bulk_tx_ep;
 	struct usb_endpoint_descriptor *bulk_rx_ep;
+	struct usb_endpoint_descriptor *isoc_tx_ep;
+	struct usb_endpoint_descriptor *isoc_rx_ep;
+
+	int isoc_altsetting;
 };
 
 static void btusb_intr_complete(struct urb *urb)
@@ -195,6 +204,8 @@ static void btusb_intr_complete(struct urb *urb)
 		return;
 
 	if (urb->status == 0) {
+		hdev->stat.byte_rx += urb->actual_length;
+
 		if (hci_recv_fragment(hdev, HCI_EVENT_PKT,
 						urb->transfer_buffer,
 						urb->actual_length) < 0) {
@@ -216,7 +227,7 @@ static void btusb_intr_complete(struct urb *urb)
 	}
 }
 
-static inline int btusb_submit_intr_urb(struct hci_dev *hdev)
+static int btusb_submit_intr_urb(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hdev->driver_data;
 	struct urb *urb;
@@ -226,6 +237,9 @@ static inline int btusb_submit_intr_urb(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	if (!data->intr_ep)
+		return -ENODEV;
+
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb)
 		return -ENOMEM;
@@ -274,6 +288,8 @@ static void btusb_bulk_complete(struct urb *urb)
 		return;
 
 	if (urb->status == 0) {
+		hdev->stat.byte_rx += urb->actual_length;
+
 		if (hci_recv_fragment(hdev, HCI_ACLDATA_PKT,
 						urb->transfer_buffer,
 						urb->actual_length) < 0) {
@@ -295,7 +311,7 @@ static void btusb_bulk_complete(struct urb *urb)
 	}
 }
 
-static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
+static int btusb_submit_bulk_urb(struct hci_dev *hdev)
 {
 	struct btusb_data *data = hdev->driver_data;
 	struct urb *urb;
@@ -305,6 +321,9 @@ static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
 
 	BT_DBG("%s", hdev->name);
 
+	if (!data->bulk_rx_ep)
+		return -ENODEV;
+
 	urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!urb)
 		return -ENOMEM;
@@ -339,6 +358,127 @@ static inline int btusb_submit_bulk_urb(struct hci_dev *hdev)
 	return err;
 }
 
+static void btusb_isoc_complete(struct urb *urb)
+{
+	struct hci_dev *hdev = urb->context;
+	struct btusb_data *data = hdev->driver_data;
+	int i, err;
+
+	BT_DBG("%s urb %p status %d count %d", hdev->name,
+					urb, urb->status, urb->actual_length);
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return;
+
+	if (urb->status == 0) {
+		for (i = 0; i < urb->number_of_packets; i++) {
+			unsigned int offset = urb->iso_frame_desc[i].offset;
+			unsigned int length = urb->iso_frame_desc[i].actual_length;
+
+			if (urb->iso_frame_desc[i].status)
+				continue;
+
+			hdev->stat.byte_rx += length;
+
+			if (hci_recv_fragment(hdev, HCI_SCODATA_PKT,
+						urb->transfer_buffer + offset,
+								length) < 0) {
+				BT_ERR("%s corrupted SCO packet", hdev->name);
+				hdev->stat.err_rx++;
+			}
+		}
+	}
+
+	if (!test_bit(BTUSB_ISOC_RUNNING, &data->flags))
+		return;
+
+	usb_anchor_urb(urb, &data->isoc_anchor);
+
+	err = usb_submit_urb(urb, GFP_ATOMIC);
+	if (err < 0) {
+		BT_ERR("%s urb %p failed to resubmit (%d)",
+						hdev->name, urb, -err);
+		usb_unanchor_urb(urb);
+	}
+}
+
+static void inline __fill_isoc_descriptor(struct urb *urb, int len, int mtu)
+{
+	int i, offset = 0;
+
+	BT_DBG("len %d mtu %d", len, mtu);
+
+	for (i = 0; i < BTUSB_MAX_ISOC_FRAMES && len >= mtu;
+					i++, offset += mtu, len -= mtu) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = mtu;
+	}
+
+	if (len && i < BTUSB_MAX_ISOC_FRAMES) {
+		urb->iso_frame_desc[i].offset = offset;
+		urb->iso_frame_desc[i].length = len;
+		i++;
+	}
+
+	urb->number_of_packets = i;
+}
+
+static int btusb_submit_isoc_urb(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hdev->driver_data;
+	struct urb *urb;
+	unsigned char *buf;
+	unsigned int pipe;
+	int err, size;
+
+	BT_DBG("%s", hdev->name);
+
+	if (!data->isoc_rx_ep)
+		return -ENODEV;
+
+	urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_KERNEL);
+	if (!urb)
+		return -ENOMEM;
+
+	size = le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize) *
+						BTUSB_MAX_ISOC_FRAMES;
+
+	buf = kmalloc(size, GFP_KERNEL);
+	if (!buf) {
+		usb_free_urb(urb);
+		return -ENOMEM;
+	}
+
+	pipe = usb_rcvisocpipe(data->udev, data->isoc_rx_ep->bEndpointAddress);
+
+	urb->dev      = data->udev;
+	urb->pipe     = pipe;
+	urb->context  = hdev;
+	urb->complete = btusb_isoc_complete;
+	urb->interval = data->isoc_rx_ep->bInterval;
+
+	urb->transfer_flags  = URB_FREE_BUFFER | URB_ISO_ASAP;
+	urb->transfer_buffer = buf;
+	urb->transfer_buffer_length = size;
+
+	__fill_isoc_descriptor(urb, size,
+			le16_to_cpu(data->isoc_rx_ep->wMaxPacketSize));
+
+	usb_anchor_urb(urb, &data->isoc_anchor);
+
+	err = usb_submit_urb(urb, GFP_KERNEL);
+	if (err < 0) {
+		BT_ERR("%s urb %p submission failed (%d)",
+						hdev->name, urb, -err);
+		usb_unanchor_urb(urb);
+		kfree(buf);
+	}
+
+	usb_free_urb(urb);
+
+	return err;
+}
+
 static void btusb_tx_complete(struct urb *urb)
 {
 	struct sk_buff *skb = urb->context;
@@ -392,6 +532,9 @@ static int btusb_close(struct hci_dev *hdev)
 	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
 		return 0;
 
+	clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+	usb_kill_anchored_urbs(&data->intr_anchor);
+
 	clear_bit(BTUSB_BULK_RUNNING, &data->flags);
 	usb_kill_anchored_urbs(&data->bulk_anchor);
 
@@ -453,6 +596,9 @@ static int btusb_send_frame(struct sk_buff *skb)
 		break;
 
 	case HCI_ACLDATA_PKT:
+		if (!data->bulk_tx_ep || hdev->conn_hash.acl_num < 1)
+			return -ENODEV;
+
 		urb = usb_alloc_urb(0, GFP_ATOMIC);
 		if (!urb)
 			return -ENOMEM;
@@ -467,9 +613,31 @@ static int btusb_send_frame(struct sk_buff *skb)
 		break;
 
 	case HCI_SCODATA_PKT:
+		if (!data->isoc_tx_ep || hdev->conn_hash.sco_num < 1)
+			return -ENODEV;
+
+		urb = usb_alloc_urb(BTUSB_MAX_ISOC_FRAMES, GFP_ATOMIC);
+		if (!urb)
+			return -ENOMEM;
+
+		pipe = usb_sndisocpipe(data->udev,
+					data->isoc_tx_ep->bEndpointAddress);
+
+		urb->dev      = data->udev;
+		urb->pipe     = pipe;
+		urb->context  = skb;
+		urb->complete = btusb_tx_complete;
+		urb->interval = data->isoc_tx_ep->bInterval;
+
+		urb->transfer_flags  = URB_ISO_ASAP;
+		urb->transfer_buffer = skb->data;
+		urb->transfer_buffer_length = skb->len;
+
+		__fill_isoc_descriptor(urb, skb->len,
+				le16_to_cpu(data->isoc_tx_ep->wMaxPacketSize));
+
 		hdev->stat.sco_tx++;
-		kfree_skb(skb);
-		return 0;
+		break;
 
 	default:
 		return -EILSEQ;
@@ -508,22 +676,86 @@ static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
 		schedule_work(&data->work);
 }
 
+static int inline __set_isoc_interface(struct hci_dev *hdev, int altsetting)
+{
+	struct btusb_data *data = hdev->driver_data;
+	struct usb_interface *intf = data->isoc;
+	struct usb_endpoint_descriptor *ep_desc;
+	int i, err;
+
+	if (!data->isoc)
+		return -ENODEV;
+
+	err = usb_set_interface(data->udev, 1, altsetting);
+	if (err < 0) {
+		BT_ERR("%s setting interface failed (%d)", hdev->name, -err);
+		return err;
+	}
+
+	data->isoc_altsetting = altsetting;
+
+	data->isoc_tx_ep = NULL;
+	data->isoc_rx_ep = NULL;
+
+	for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
+		ep_desc = &intf->cur_altsetting->endpoint[i].desc;
+
+		if (!data->isoc_tx_ep && usb_endpoint_is_isoc_out(ep_desc)) {
+			data->isoc_tx_ep = ep_desc;
+			continue;
+		}
+
+		if (!data->isoc_rx_ep && usb_endpoint_is_isoc_in(ep_desc)) {
+			data->isoc_rx_ep = ep_desc;
+			continue;
+		}
+	}
+
+	if (!data->isoc_tx_ep || !data->isoc_rx_ep) {
+		BT_ERR("%s invalid SCO descriptors", hdev->name);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
 static void btusb_work(struct work_struct *work)
 {
 	struct btusb_data *data = container_of(work, struct btusb_data, work);
 	struct hci_dev *hdev = data->hdev;
 
-	if (hdev->conn_hash.acl_num == 0) {
+	if (hdev->conn_hash.acl_num > 0) {
+		if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
+			if (btusb_submit_bulk_urb(hdev) < 0)
+				clear_bit(BTUSB_BULK_RUNNING, &data->flags);
+			else
+				btusb_submit_bulk_urb(hdev);
+		}
+	} else {
 		clear_bit(BTUSB_BULK_RUNNING, &data->flags);
 		usb_kill_anchored_urbs(&data->bulk_anchor);
-		return;
 	}
 
-	if (!test_and_set_bit(BTUSB_BULK_RUNNING, &data->flags)) {
-		if (btusb_submit_bulk_urb(hdev) < 0)
-			clear_bit(BTUSB_BULK_RUNNING, &data->flags);
-		else
-			btusb_submit_bulk_urb(hdev);
+	if (hdev->conn_hash.sco_num > 0) {
+		if (data->isoc_altsetting != 2) {
+			clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+			usb_kill_anchored_urbs(&data->isoc_anchor);
+
+			if (__set_isoc_interface(hdev, 2) < 0)
+				return;
+		}
+
+		if (!test_and_set_bit(BTUSB_ISOC_RUNNING, &data->flags)) {
+			if (btusb_submit_isoc_urb(hdev) < 0)
+				clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+			else
+				btusb_submit_isoc_urb(hdev);
+		}
+	} else {
+		clear_bit(BTUSB_ISOC_RUNNING, &data->flags);
+		usb_kill_anchored_urbs(&data->isoc_anchor);
+
+		__set_isoc_interface(hdev, 0);
 	}
 }
 
@@ -597,6 +829,7 @@ static int btusb_probe(struct usb_interface *intf,
 	init_usb_anchor(&data->tx_anchor);
 	init_usb_anchor(&data->intr_anchor);
 	init_usb_anchor(&data->bulk_anchor);
+	init_usb_anchor(&data->isoc_anchor);
 
 	hdev = hci_alloc_dev();
 	if (!hdev) {
@@ -620,6 +853,9 @@ static int btusb_probe(struct usb_interface *intf,
 
 	hdev->owner = THIS_MODULE;
 
+	/* interface numbers are hardcoded in the spec */
+	data->isoc = usb_ifnum_to_if(data->udev, 1);
+
 	if (reset || id->driver_info & BTUSB_RESET)
 		set_bit(HCI_QUIRK_RESET_ON_INIT, &hdev->quirks);
 
@@ -628,11 +864,16 @@ static int btusb_probe(struct usb_interface *intf,
 			set_bit(HCI_QUIRK_FIXUP_BUFFER_SIZE, &hdev->quirks);
 	}
 
+	if (id->driver_info & BTUSB_BROKEN_ISOC)
+		data->isoc = NULL;
+
 	if (id->driver_info & BTUSB_SNIFFER) {
-		struct usb_device *udev = interface_to_usbdev(intf);
+		struct usb_device *udev = data->udev;
 
 		if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
 			set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
+		data->isoc = NULL;
 	}
 
 	if (id->driver_info & BTUSB_BCM92035) {
@@ -646,6 +887,16 @@ static int btusb_probe(struct usb_interface *intf,
 		}
 	}
 
+	if (data->isoc) {
+		err = usb_driver_claim_interface(&btusb_driver,
+							data->isoc, NULL);
+		if (err < 0) {
+			hci_free_dev(hdev);
+			kfree(data);
+			return err;
+		}
+	}
+
 	err = hci_register_dev(hdev);
 	if (err < 0) {
 		hci_free_dev(hdev);
@@ -670,6 +921,9 @@ static void btusb_disconnect(struct usb_interface *intf)
 
 	hdev = data->hdev;
 
+	if (data->isoc)
+		usb_driver_release_interface(&btusb_driver, data->isoc);
+
 	usb_set_intfdata(intf, NULL);
 
 	hci_unregister_dev(hdev);
-- 
GitLab


From 90855d7b725d764d6d70503bcc1b494cf10ddc98 Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Mon, 18 Aug 2008 13:23:53 +0200
Subject: [PATCH 135/869] [Bluetooth] Fix userspace breakage due missing class
 links

The Bluetooth adapters and connections are best presented via a class
in sysfs. The removal of the links inside the Bluetooth class broke
assumptions by userspace programs on how to find attached adapters.

This patch creates adapters and connections as part of the Bluetooth
class, but it uses different device types to distinguish them. The
userspace programs can now easily navigate in the sysfs device tree.

The unused platform device and bus have been removed to keep the
code simple and clean.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 net/bluetooth/hci_sysfs.c | 376 +++++++++++++++++++-------------------
 1 file changed, 189 insertions(+), 187 deletions(-)

diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index c85bf8f678d..f4f6615cad9 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -3,8 +3,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <linux/platform_device.h>
-
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
 
@@ -12,10 +10,164 @@
 #undef  BT_DBG
 #define BT_DBG(D...)
 #endif
+
+struct class *bt_class = NULL;
+EXPORT_SYMBOL_GPL(bt_class);
+
 static struct workqueue_struct *btaddconn;
 static struct workqueue_struct *btdelconn;
 
-static inline char *typetostr(int type)
+static inline char *link_typetostr(int type)
+{
+	switch (type) {
+	case ACL_LINK:
+		return "ACL";
+	case SCO_LINK:
+		return "SCO";
+	case ESCO_LINK:
+		return "eSCO";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static ssize_t show_link_type(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct hci_conn *conn = dev_get_drvdata(dev);
+	return sprintf(buf, "%s\n", link_typetostr(conn->type));
+}
+
+static ssize_t show_link_address(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct hci_conn *conn = dev_get_drvdata(dev);
+	bdaddr_t bdaddr;
+	baswap(&bdaddr, &conn->dst);
+	return sprintf(buf, "%s\n", batostr(&bdaddr));
+}
+
+static ssize_t show_link_features(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct hci_conn *conn = dev_get_drvdata(dev);
+
+	return sprintf(buf, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+				conn->features[0], conn->features[1],
+				conn->features[2], conn->features[3],
+				conn->features[4], conn->features[5],
+				conn->features[6], conn->features[7]);
+}
+
+#define LINK_ATTR(_name,_mode,_show,_store) \
+struct device_attribute link_attr_##_name = __ATTR(_name,_mode,_show,_store)
+
+static LINK_ATTR(type, S_IRUGO, show_link_type, NULL);
+static LINK_ATTR(address, S_IRUGO, show_link_address, NULL);
+static LINK_ATTR(features, S_IRUGO, show_link_features, NULL);
+
+static struct attribute *bt_link_attrs[] = {
+	&link_attr_type.attr,
+	&link_attr_address.attr,
+	&link_attr_features.attr,
+	NULL
+};
+
+static struct attribute_group bt_link_group = {
+	.attrs = bt_link_attrs,
+};
+
+static struct attribute_group *bt_link_groups[] = {
+	&bt_link_group,
+	NULL
+};
+
+static void bt_link_release(struct device *dev)
+{
+	void *data = dev_get_drvdata(dev);
+	kfree(data);
+}
+
+static struct device_type bt_link = {
+	.name    = "link",
+	.groups  = bt_link_groups,
+	.release = bt_link_release,
+};
+
+static void add_conn(struct work_struct *work)
+{
+	struct hci_conn *conn = container_of(work, struct hci_conn, work);
+
+	flush_workqueue(btdelconn);
+
+	if (device_add(&conn->dev) < 0) {
+		BT_ERR("Failed to register connection device");
+		return;
+	}
+}
+
+void hci_conn_add_sysfs(struct hci_conn *conn)
+{
+	struct hci_dev *hdev = conn->hdev;
+
+	BT_DBG("conn %p", conn);
+
+	conn->dev.type = &bt_link;
+	conn->dev.class = bt_class;
+	conn->dev.parent = &hdev->dev;
+
+	snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
+					hdev->name, conn->handle);
+
+	dev_set_drvdata(&conn->dev, conn);
+
+	device_initialize(&conn->dev);
+
+	INIT_WORK(&conn->work, add_conn);
+
+	queue_work(btaddconn, &conn->work);
+}
+
+/*
+ * The rfcomm tty device will possibly retain even when conn
+ * is down, and sysfs doesn't support move zombie device,
+ * so we should move the device before conn device is destroyed.
+ */
+static int __match_tty(struct device *dev, void *data)
+{
+	return !strncmp(dev->bus_id, "rfcomm", 6);
+}
+
+static void del_conn(struct work_struct *work)
+{
+	struct hci_conn *conn = container_of(work, struct hci_conn, work);
+	struct hci_dev *hdev = conn->hdev;
+
+	while (1) {
+		struct device *dev;
+
+		dev = device_find_child(&conn->dev, NULL, __match_tty);
+		if (!dev)
+			break;
+		device_move(dev, NULL);
+		put_device(dev);
+	}
+
+	device_del(&conn->dev);
+	put_device(&conn->dev);
+	hci_dev_put(hdev);
+}
+
+void hci_conn_del_sysfs(struct hci_conn *conn)
+{
+	BT_DBG("conn %p", conn);
+
+	if (!device_is_registered(&conn->dev))
+		return;
+
+	INIT_WORK(&conn->work, del_conn);
+
+	queue_work(btdelconn, &conn->work);
+}
+
+static inline char *host_typetostr(int type)
 {
 	switch (type) {
 	case HCI_VIRTUAL:
@@ -40,7 +192,7 @@ static inline char *typetostr(int type)
 static ssize_t show_type(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct hci_dev *hdev = dev_get_drvdata(dev);
-	return sprintf(buf, "%s\n", typetostr(hdev->type));
+	return sprintf(buf, "%s\n", host_typetostr(hdev->type));
 }
 
 static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
@@ -221,183 +373,62 @@ static DEVICE_ATTR(sniff_max_interval, S_IRUGO | S_IWUSR,
 static DEVICE_ATTR(sniff_min_interval, S_IRUGO | S_IWUSR,
 				show_sniff_min_interval, store_sniff_min_interval);
 
-static struct device_attribute *bt_attrs[] = {
-	&dev_attr_type,
-	&dev_attr_name,
-	&dev_attr_class,
-	&dev_attr_address,
-	&dev_attr_features,
-	&dev_attr_manufacturer,
-	&dev_attr_hci_version,
-	&dev_attr_hci_revision,
-	&dev_attr_inquiry_cache,
-	&dev_attr_idle_timeout,
-	&dev_attr_sniff_max_interval,
-	&dev_attr_sniff_min_interval,
+static struct attribute *bt_host_attrs[] = {
+	&dev_attr_type.attr,
+	&dev_attr_name.attr,
+	&dev_attr_class.attr,
+	&dev_attr_address.attr,
+	&dev_attr_features.attr,
+	&dev_attr_manufacturer.attr,
+	&dev_attr_hci_version.attr,
+	&dev_attr_hci_revision.attr,
+	&dev_attr_inquiry_cache.attr,
+	&dev_attr_idle_timeout.attr,
+	&dev_attr_sniff_max_interval.attr,
+	&dev_attr_sniff_min_interval.attr,
 	NULL
 };
 
-static ssize_t show_conn_type(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct hci_conn *conn = dev_get_drvdata(dev);
-	return sprintf(buf, "%s\n", conn->type == ACL_LINK ? "ACL" : "SCO");
-}
-
-static ssize_t show_conn_address(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct hci_conn *conn = dev_get_drvdata(dev);
-	bdaddr_t bdaddr;
-	baswap(&bdaddr, &conn->dst);
-	return sprintf(buf, "%s\n", batostr(&bdaddr));
-}
-
-static ssize_t show_conn_features(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct hci_conn *conn = dev_get_drvdata(dev);
-
-	return sprintf(buf, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
-				conn->features[0], conn->features[1],
-				conn->features[2], conn->features[3],
-				conn->features[4], conn->features[5],
-				conn->features[6], conn->features[7]);
-}
-
-#define CONN_ATTR(_name,_mode,_show,_store) \
-struct device_attribute conn_attr_##_name = __ATTR(_name,_mode,_show,_store)
-
-static CONN_ATTR(type, S_IRUGO, show_conn_type, NULL);
-static CONN_ATTR(address, S_IRUGO, show_conn_address, NULL);
-static CONN_ATTR(features, S_IRUGO, show_conn_features, NULL);
-
-static struct device_attribute *conn_attrs[] = {
-	&conn_attr_type,
-	&conn_attr_address,
-	&conn_attr_features,
-	NULL
+static struct attribute_group bt_host_group = {
+	.attrs = bt_host_attrs,
 };
 
-struct class *bt_class = NULL;
-EXPORT_SYMBOL_GPL(bt_class);
-
-static struct bus_type bt_bus = {
-	.name	= "bluetooth",
+static struct attribute_group *bt_host_groups[] = {
+	&bt_host_group,
+	NULL
 };
 
-static struct platform_device *bt_platform;
-
-static void bt_release(struct device *dev)
+static void bt_host_release(struct device *dev)
 {
 	void *data = dev_get_drvdata(dev);
 	kfree(data);
 }
 
-static void add_conn(struct work_struct *work)
-{
-	struct hci_conn *conn = container_of(work, struct hci_conn, work);
-	int i;
-
-	flush_workqueue(btdelconn);
-
-	if (device_add(&conn->dev) < 0) {
-		BT_ERR("Failed to register connection device");
-		return;
-	}
-
-	for (i = 0; conn_attrs[i]; i++)
-		if (device_create_file(&conn->dev, conn_attrs[i]) < 0)
-			BT_ERR("Failed to create connection attribute");
-}
-
-void hci_conn_add_sysfs(struct hci_conn *conn)
-{
-	struct hci_dev *hdev = conn->hdev;
-
-	BT_DBG("conn %p", conn);
-
-	conn->dev.bus = &bt_bus;
-	conn->dev.parent = &hdev->dev;
-
-	conn->dev.release = bt_release;
-
-	snprintf(conn->dev.bus_id, BUS_ID_SIZE, "%s:%d",
-					hdev->name, conn->handle);
-
-	dev_set_drvdata(&conn->dev, conn);
-
-	device_initialize(&conn->dev);
-
-	INIT_WORK(&conn->work, add_conn);
-
-	queue_work(btaddconn, &conn->work);
-}
-
-/*
- * The rfcomm tty device will possibly retain even when conn
- * is down, and sysfs doesn't support move zombie device,
- * so we should move the device before conn device is destroyed.
- */
-static int __match_tty(struct device *dev, void *data)
-{
-	return !strncmp(dev->bus_id, "rfcomm", 6);
-}
-
-static void del_conn(struct work_struct *work)
-{
-	struct hci_conn *conn = container_of(work, struct hci_conn, work);
-	struct hci_dev *hdev = conn->hdev;
-
-	while (1) {
-		struct device *dev;
-
-		dev = device_find_child(&conn->dev, NULL, __match_tty);
-		if (!dev)
-			break;
-		device_move(dev, NULL);
-		put_device(dev);
-	}
-
-	device_del(&conn->dev);
-	put_device(&conn->dev);
-	hci_dev_put(hdev);
-}
-
-void hci_conn_del_sysfs(struct hci_conn *conn)
-{
-	BT_DBG("conn %p", conn);
-
-	if (!device_is_registered(&conn->dev))
-		return;
-
-	INIT_WORK(&conn->work, del_conn);
-
-	queue_work(btdelconn, &conn->work);
-}
+static struct device_type bt_host = {
+	.name    = "host",
+	.groups  = bt_host_groups,
+	.release = bt_host_release,
+};
 
 int hci_register_sysfs(struct hci_dev *hdev)
 {
 	struct device *dev = &hdev->dev;
-	unsigned int i;
 	int err;
 
 	BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type);
 
-	dev->bus = &bt_bus;
+	dev->type = &bt_host;
+	dev->class = bt_class;
 	dev->parent = hdev->parent;
 
 	strlcpy(dev->bus_id, hdev->name, BUS_ID_SIZE);
 
-	dev->release = bt_release;
-
 	dev_set_drvdata(dev, hdev);
 
 	err = device_register(dev);
 	if (err < 0)
 		return err;
 
-	for (i = 0; bt_attrs[i]; i++)
-		if (device_create_file(dev, bt_attrs[i]) < 0)
-			BT_ERR("Failed to create device attribute");
-
 	return 0;
 }
 
@@ -410,59 +441,30 @@ void hci_unregister_sysfs(struct hci_dev *hdev)
 
 int __init bt_sysfs_init(void)
 {
-	int err;
-
 	btaddconn = create_singlethread_workqueue("btaddconn");
-	if (!btaddconn) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!btaddconn)
+		return -ENOMEM;
 
 	btdelconn = create_singlethread_workqueue("btdelconn");
 	if (!btdelconn) {
-		err = -ENOMEM;
-		goto out_del;
-	}
-
-	bt_platform = platform_device_register_simple("bluetooth", -1, NULL, 0);
-	if (IS_ERR(bt_platform)) {
-		err = PTR_ERR(bt_platform);
-		goto out_platform;
+		destroy_workqueue(btaddconn);
+		return -ENOMEM;
 	}
 
-	err = bus_register(&bt_bus);
-	if (err < 0)
-		goto out_bus;
-
 	bt_class = class_create(THIS_MODULE, "bluetooth");
 	if (IS_ERR(bt_class)) {
-		err = PTR_ERR(bt_class);
-		goto out_class;
+		destroy_workqueue(btdelconn);
+		destroy_workqueue(btaddconn);
+		return PTR_ERR(bt_class);
 	}
 
 	return 0;
-
-out_class:
-	bus_unregister(&bt_bus);
-out_bus:
-	platform_device_unregister(bt_platform);
-out_platform:
-	destroy_workqueue(btdelconn);
-out_del:
-	destroy_workqueue(btaddconn);
-out:
-	return err;
 }
 
 void bt_sysfs_cleanup(void)
 {
 	destroy_workqueue(btaddconn);
-
 	destroy_workqueue(btdelconn);
 
 	class_destroy(bt_class);
-
-	bus_unregister(&bt_bus);
-
-	platform_device_unregister(bt_platform);
 }
-- 
GitLab


From 63fbd24e5102eecfc9d049ed7f4be7f9a25f814f Mon Sep 17 00:00:00 2001
From: Marcel Holtmann <marcel@holtmann.org>
Date: Mon, 18 Aug 2008 13:23:53 +0200
Subject: [PATCH 136/869] [Bluetooth] Consolidate maintainers information

The Bluetooth entries for the MAINTAINERS file are a little bit too
much. Consolidate them into two entries. One for Bluetooth drivers and
another one for the Bluetooth subsystem.

Also the MODULE_AUTHOR should indicate the current maintainer of the
module and actually not the original author. Fix all Bluetooth modules
to provide current maintainer information.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
 MAINTAINERS                   | 87 +++--------------------------------
 drivers/bluetooth/bt3c_cs.c   |  2 +-
 drivers/bluetooth/hci_ldisc.c |  2 +-
 drivers/bluetooth/hci_usb.c   |  2 +-
 drivers/bluetooth/hci_vhci.c  |  2 +-
 net/bluetooth/af_bluetooth.c  |  2 +-
 net/bluetooth/bnep/core.c     |  2 +-
 net/bluetooth/l2cap.c         |  2 +-
 net/bluetooth/rfcomm/core.c   |  2 +-
 net/bluetooth/sco.c           |  2 +-
 10 files changed, 15 insertions(+), 90 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index af6aa4e4b39..2676f9a1fee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -936,94 +936,19 @@ M:	joern@lazybastard.org
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 
-BLUETOOTH SUBSYSTEM
+BLUETOOTH DRIVERS
 P:	Marcel Holtmann
 M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
 L:	linux-bluetooth@vger.kernel.org
-W:	http://bluez.sf.net
-W:	http://www.bluez.org
-W:	http://www.holtmann.org/linux/bluetooth/
-T:	git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
-S:	Maintained
-
-BLUETOOTH RFCOMM LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH BNEP LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH CMTP LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
+W:	http://www.bluez.org/
 S:	Maintained
 
-BLUETOOTH HIDP LAYER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI UART DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH HCI USB DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
-S:	Maintained
-
-BLUETOOTH HCI BCM203X DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BPA10X DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BFUSB DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI DTL1 DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BLUECARD DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BT3C DRIVER
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI BTUART DRIVER
+BLUETOOTH SUBSYSTEM
 P:	Marcel Holtmann
 M:	marcel@holtmann.org
-S:	Maintained
-
-BLUETOOTH HCI VHCI DRIVER
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
+L:	linux-bluetooth@vger.kernel.org
+W:	http://www.bluez.org/
+T:	git kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
 S:	Maintained
 
 BONDING DRIVER
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 593b7c59503..27058477cc8 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -60,7 +60,7 @@
 /* ======================== Module parameters ======================== */
 
 
-MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>, Jose Orlando Pereira <jop@di.uminho.pt>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth driver for the 3Com Bluetooth PCMCIA card");
 MODULE_LICENSE("GPL");
 MODULE_FIRMWARE("BT3CPCC.bin");
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 69df187d74c..8dfcf77cb71 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -577,7 +577,7 @@ module_exit(hci_uart_exit);
 module_param(reset, bool, 0644);
 MODULE_PARM_DESC(reset, "Send HCI reset command on initialization");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth HCI UART driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
index e397572bf57..3c453924f83 100644
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -1130,7 +1130,7 @@ module_param(isoc, int, 0644);
 MODULE_PARM_DESC(isoc, "Set isochronous transfers for SCO over HCI support");
 #endif
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth HCI USB driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index d97700aa54a..7320a71b636 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -377,7 +377,7 @@ module_exit(vhci_exit);
 module_param(minor, int, 0444);
 MODULE_PARM_DESC(minor, "Miscellaneous minor device number");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth virtual HCI driver ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 4e59df5f8e0..1edfdf4c095 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -456,7 +456,7 @@ static void __exit bt_exit(void)
 subsys_initcall(bt_init);
 module_exit(bt_exit);
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth Core ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c
index 12bba6207a8..80ba30cf4b6 100644
--- a/net/bluetooth/bnep/core.c
+++ b/net/bluetooth/bnep/core.c
@@ -736,7 +736,7 @@ MODULE_PARM_DESC(compress_src, "Compress sources headers");
 module_param(compress_dst, bool, 0644);
 MODULE_PARM_DESC(compress_dst, "Compress destination headers");
 
-MODULE_AUTHOR("David Libault <david.libault@inventel.fr>, Maxim Krasnyansky <maxk@qualcomm.com>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth BNEP ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index c1239852834..3396d5bdef1 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -2516,7 +2516,7 @@ EXPORT_SYMBOL(l2cap_load);
 module_init(l2cap_init);
 module_exit(l2cap_exit);
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth L2CAP ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 6cfc7ba611b..ba537fae0a4 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -2115,7 +2115,7 @@ MODULE_PARM_DESC(channel_mtu, "Default MTU for the RFCOMM channel");
 module_param(l2cap_mtu, uint, 0644);
 MODULE_PARM_DESC(l2cap_mtu, "Default MTU for the L2CAP connection");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth RFCOMM ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 8cda4987486..a16011fedc1 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -1002,7 +1002,7 @@ module_exit(sco_exit);
 module_param(disable_esco, bool, 0644);
 MODULE_PARM_DESC(disable_esco, "Disable eSCO connection creation");
 
-MODULE_AUTHOR("Maxim Krasnyansky <maxk@qualcomm.com>, Marcel Holtmann <marcel@holtmann.org>");
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
 MODULE_DESCRIPTION("Bluetooth SCO ver " VERSION);
 MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL");
-- 
GitLab


From faa64c93ae3fa3b3c97e502e60ce8430ab61cd9d Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 5 Aug 2008 10:36:00 +0100
Subject: [PATCH 137/869] [ARM] fix impd1.c build warning

  CC      arch/arm/mach-integrator/impd1.o
arch/arm/mach-integrator/impd1.c: In function `impd1_probe':
arch/arm/mach-integrator/impd1.c:408: warning: too few arguments for format

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-integrator/impd1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 0a7b3267c8d..3c8383dbe9e 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -405,7 +405,7 @@ static int impd1_probe(struct lm_device *dev)
 
 		ret = amba_device_register(d, &dev->resource);
 		if (ret) {
-			dev_err(&d->dev, "unable to register device: %d\n");
+			dev_err(&d->dev, "unable to register device: %d\n", ret);
 			kfree(d);
 		}
 	}
-- 
GitLab


From 26135ed3229a06dc8b5b7686dd272a28f5bf40b3 Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Fri, 15 Aug 2008 15:06:21 -0400
Subject: [PATCH 138/869] Input: cobalt_btns - add missing MODULE_LICENSE

Export the module license and other information about the Cobalt
button module in order to avoid the following warning:

| WARNING: modpost: missing MODULE_LICENSE() in drivers/input/misc/cobalt_btns.o

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Acked-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/misc/cobalt_btns.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/input/misc/cobalt_btns.c b/drivers/input/misc/cobalt_btns.c
index 6a1f48b76e3..2adf9cb265d 100644
--- a/drivers/input/misc/cobalt_btns.c
+++ b/drivers/input/misc/cobalt_btns.c
@@ -148,6 +148,9 @@ static int __devexit cobalt_buttons_remove(struct platform_device *pdev)
 	return 0;
 }
 
+MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
+MODULE_DESCRIPTION("Cobalt button interface driver");
+MODULE_LICENSE("GPL");
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:Cobalt buttons");
 
-- 
GitLab


From 0cc1fe2238e458ebe2d52f035ccc6f3d2ecc9ca1 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Mon, 18 Aug 2008 10:57:10 -0400
Subject: [PATCH 139/869] Input: remove version.h from drivers that don't need
 it

If a driver dies not use LINUX_VERSION_CODE nor KERNEL_VERSION
then it does not need to include version.h

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/keyboard/gpio_keys.c      | 1 -
 drivers/input/mouse/gpio_mouse.c        | 1 -
 drivers/input/tablet/gtco.c             | 1 -
 drivers/input/touchscreen/wm9705.c      | 1 -
 drivers/input/touchscreen/wm9712.c      | 1 -
 drivers/input/touchscreen/wm9713.c      | 1 -
 drivers/input/touchscreen/wm97xx-core.c | 1 -
 7 files changed, 7 deletions(-)

diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index 3f48279f219..ec96b369dd7 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 
 #include <linux/init.h>
 #include <linux/fs.h>
diff --git a/drivers/input/mouse/gpio_mouse.c b/drivers/input/mouse/gpio_mouse.c
index 33929018487..72cf5e33790 100644
--- a/drivers/input/mouse/gpio_mouse.c
+++ b/drivers/input/mouse/gpio_mouse.c
@@ -9,7 +9,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/input-polldev.h>
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index b9b7a98bc5a..7df0228e836 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -64,7 +64,6 @@ Scott Hill shill@gtcocalcomp.com
 #include <asm/byteorder.h>
 
 
-#include <linux/version.h>
 #include <linux/usb/input.h>
 
 /* Version with a Major number of 2 is for kernel inclusion only. */
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
index 978e1a13ffc..372efbc694f 100644
--- a/drivers/input/touchscreen/wm9705.c
+++ b/drivers/input/touchscreen/wm9705.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/delay.h>
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 4c5d85a249a..c8bb1e7335f 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/delay.h>
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 838458792ea..781ee83547e 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -17,7 +17,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/input.h>
 #include <linux/delay.h>
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index cdc24ad314e..d589ab0e3ad 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -37,7 +37,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
-- 
GitLab


From 88b9e2bef3e38c053ec8f054f2cbb9345724cdb1 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 5 Aug 2008 22:06:51 +0300
Subject: [PATCH 140/869] ath9k: work around gcc ICEs (again)

(I missed the fact that the original post said to apply this patch
twice... -- JWL)

Original commit log message:

This patch works around an internal compiler error (gcc bug #37014) in
all gcc 4.2 compilers and the gcc 4.3 series up to at least 4.3.1
on at least powerpc and mips.

Many thanks to Andrew Pinski for analyzing the gcc bug.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/hw.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index bde162f128a..a17eb130f57 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -5017,7 +5017,11 @@ static void ath9k_hw_spur_mitigate(struct ath_hal *ah,
 
 	for (i = 0; i < 123; i++) {
 		if ((cur_vit_mask > lower) && (cur_vit_mask < upper)) {
-			if ((abs(cur_vit_mask - bin)) < 75)
+
+			/* workaround for gcc bug #37014 */
+			volatile int tmp = abs(cur_vit_mask - bin);
+
+			if (tmp < 75)
 				mask_amt = 1;
 			else
 				mask_amt = 0;
-- 
GitLab


From aaa1553512b9105699113ea7e2ea726f3d9d4de2 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Sat, 9 Aug 2008 19:20:47 -0500
Subject: [PATCH 141/869] p54: Fix regression due to "net: Delete
 NETDEVICES_MULTIQUEUE kconfig option"

Commit b19fa1f, entitled "net: Delete NETDEVICES_MULTIQUEUE kconfig
option" breaks p54pci and p54usb.

Additionally, the old logic always tx'ed cts frames (if enabled)
with a short preamble when [rate > 3]. (i.e. with any 802.11g rate).
Of course this isn't that bad, but it's still wrong!

(This patch also clarifies the meanings of some of the fields in the tx
header for the hardware. -- JWL)

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54common.c | 31 ++++++++++++++--------------
 drivers/net/wireless/p54/p54common.h | 18 ++++++++--------
 2 files changed, 25 insertions(+), 24 deletions(-)

diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 83cd85e1f84..49afd20d2c3 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -413,12 +413,12 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb)
 			last_addr = range->end_addr;
 			__skb_unlink(entry, &priv->tx_queue);
 			memset(&info->status, 0, sizeof(info->status));
-			priv->tx_stats[skb_get_queue_mapping(skb)].len--;
 			entry_hdr = (struct p54_control_hdr *) entry->data;
 			entry_data = (struct p54_tx_control_allocdata *) entry_hdr->data;
 			if ((entry_hdr->magic1 & cpu_to_le16(0x4000)) != 0)
 				pad = entry_data->align[0];
 
+			priv->tx_stats[entry_data->hw_queue - 4].len--;
 			if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
 				if (!(payload->status & 0x01))
 					info->flags |= IEEE80211_TX_STAT_ACK;
@@ -557,6 +557,7 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	struct p54_tx_control_allocdata *txhdr;
 	size_t padding, len;
 	u8 rate;
+	u8 cts_rate = 0x20;
 
 	current_queue = &priv->tx_stats[skb_get_queue_mapping(skb)];
 	if (unlikely(current_queue->len > current_queue->limit))
@@ -581,28 +582,28 @@ static int p54_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	hdr->type = (info->flags & IEEE80211_TX_CTL_NO_ACK) ? 0 : cpu_to_le16(1);
 	hdr->retry1 = hdr->retry2 = info->control.retry_limit;
 
-	memset(txhdr->wep_key, 0x0, 16);
-	txhdr->padding = 0;
-	txhdr->padding2 = 0;
-
 	/* TODO: add support for alternate retry TX rates */
 	rate = ieee80211_get_tx_rate(dev, info)->hw_value;
-	if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE)
+	if (info->flags & IEEE80211_TX_CTL_SHORT_PREAMBLE) {
 		rate |= 0x10;
-	if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
+		cts_rate |= 0x10;
+	}
+	if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) {
 		rate |= 0x40;
-	else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT)
+		cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
+	} else if (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT) {
 		rate |= 0x20;
+		cts_rate |= ieee80211_get_rts_cts_rate(dev, info)->hw_value;
+	}
 	memset(txhdr->rateset, rate, 8);
-	txhdr->wep_key_present = 0;
-	txhdr->wep_key_len = 0;
-	txhdr->frame_type = cpu_to_le32(skb_get_queue_mapping(skb) + 4);
-	txhdr->magic4 = 0;
-	txhdr->antenna = (info->antenna_sel_tx == 0) ?
+	txhdr->key_type = 0;
+	txhdr->key_len = 0;
+	txhdr->hw_queue = skb_get_queue_mapping(skb) + 4;
+	txhdr->tx_antenna = (info->antenna_sel_tx == 0) ?
 		2 : info->antenna_sel_tx - 1;
 	txhdr->output_power = 0x7f; // HW Maximum
-	txhdr->magic5 = (info->flags & IEEE80211_TX_CTL_NO_ACK) ?
-		0 : ((rate > 0x3) ? cpu_to_le32(0x33) : cpu_to_le32(0x23));
+	txhdr->cts_rate = (info->flags & IEEE80211_TX_CTL_NO_ACK) ?
+			  0 : cts_rate;
 	if (padding)
 		txhdr->align[0] = padding;
 
diff --git a/drivers/net/wireless/p54/p54common.h b/drivers/net/wireless/p54/p54common.h
index 2245fcce92d..8db6c0e8e54 100644
--- a/drivers/net/wireless/p54/p54common.h
+++ b/drivers/net/wireless/p54/p54common.h
@@ -183,16 +183,16 @@ struct p54_frame_sent_hdr {
 
 struct p54_tx_control_allocdata {
 	u8 rateset[8];
-	u16 padding;
-	u8 wep_key_present;
-	u8 wep_key_len;
-	u8 wep_key[16];
-	__le32 frame_type;
-	u32 padding2;
-	__le16 magic4;
-	u8 antenna;
+	u8 unalloc0[2];
+	u8 key_type;
+	u8 key_len;
+	u8 key[16];
+	u8 hw_queue;
+	u8 unalloc1[9];
+	u8 tx_antenna;
 	u8 output_power;
-	__le32 magic5;
+	u8 cts_rate;
+	u8 unalloc2[3];
 	u8 align[0];
 } __attribute__ ((packed));
 
-- 
GitLab


From e10e0dfe3ba358cfb442cc3bf0d3f2068785bf5c Mon Sep 17 00:00:00 2001
From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Date: Sat, 2 Aug 2008 14:56:25 -0300
Subject: [PATCH 142/869] rfkill: protect suspended rfkill controllers

Guard rfkill controllers attached to a rfkill class against state changes
after class suspend has been issued.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 Documentation/rfkill.txt |  5 +++++
 net/rfkill/rfkill.c      | 14 ++++++++++----
 2 files changed, 15 insertions(+), 4 deletions(-)

diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index 28b6ec87c64..6fcb3060dec 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -363,6 +363,11 @@ This rule exists because users of the rfkill subsystem expect to get (and set,
 when possible) the overall transmitter rfkill state, not of a particular rfkill
 line.
 
+5. During suspend, the rfkill class will attempt to soft-block the radio
+through a call to rfkill->toggle_radio, and will try to restore its previous
+state during resume.  After a rfkill class is suspended, it will *not* call
+rfkill->toggle_radio until it is resumed.
+
 Example of a WLAN wireless driver connected to the rfkill subsystem:
 --------------------------------------------------------------------
 
diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index d2d45655cd1..35a9994e233 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c
@@ -150,6 +150,8 @@ static void update_rfkill_state(struct rfkill *rfkill)
  * calls and handling all the red tape such as issuing notifications
  * if the call is successful.
  *
+ * Suspended devices are not touched at all, and -EAGAIN is returned.
+ *
  * Note that the @force parameter cannot override a (possibly cached)
  * state of RFKILL_STATE_HARD_BLOCKED.  Any device making use of
  * RFKILL_STATE_HARD_BLOCKED implements either get_state() or
@@ -168,6 +170,9 @@ static int rfkill_toggle_radio(struct rfkill *rfkill,
 	int retval = 0;
 	enum rfkill_state oldstate, newstate;
 
+	if (unlikely(rfkill->dev.power.power_state.event & PM_EVENT_SLEEP))
+		return -EBUSY;
+
 	oldstate = rfkill->state;
 
 	if (rfkill->get_state && !force &&
@@ -214,7 +219,7 @@ static int rfkill_toggle_radio(struct rfkill *rfkill,
  *
  * This function toggles the state of all switches of given type,
  * unless a specific switch is claimed by userspace (in which case,
- * that switch is left alone).
+ * that switch is left alone) or suspended.
  */
 void rfkill_switch_all(enum rfkill_type type, enum rfkill_state state)
 {
@@ -239,8 +244,8 @@ EXPORT_SYMBOL(rfkill_switch_all);
 /**
  * rfkill_epo - emergency power off all transmitters
  *
- * This kicks all rfkill devices to RFKILL_STATE_SOFT_BLOCKED, ignoring
- * everything in its path but rfkill_mutex and rfkill->mutex.
+ * This kicks all non-suspended rfkill devices to RFKILL_STATE_SOFT_BLOCKED,
+ * ignoring everything in its path but rfkill_mutex and rfkill->mutex.
  */
 void rfkill_epo(void)
 {
@@ -458,13 +463,14 @@ static int rfkill_resume(struct device *dev)
 	if (dev->power.power_state.event != PM_EVENT_ON) {
 		mutex_lock(&rfkill->mutex);
 
+		dev->power.power_state.event = PM_EVENT_ON;
+
 		/* restore radio state AND notify everybody */
 		rfkill_toggle_radio(rfkill, rfkill->state, 1);
 
 		mutex_unlock(&rfkill->mutex);
 	}
 
-	dev->power.power_state = PMSG_ON;
 	return 0;
 }
 #else
-- 
GitLab


From 7f37441c21d3ae9fec47ef418ccafb2823d12a27 Mon Sep 17 00:00:00 2001
From: Holger Schurig <hs4233@mail.mn-solutions.de>
Date: Thu, 7 Aug 2008 18:24:12 +0200
Subject: [PATCH 143/869] ssb: allow compilation on systems without PCI

Makes ssb work on system without a PCI bus.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/ssb/main.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index d831a2beff3..87ab2443e66 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -1165,15 +1165,19 @@ EXPORT_SYMBOL(ssb_dma_translation);
 
 int ssb_dma_set_mask(struct ssb_device *dev, u64 mask)
 {
+#ifdef CONFIG_SSB_PCIHOST
 	int err;
+#endif
 
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
 		err = pci_set_dma_mask(dev->bus->host_pci, mask);
 		if (err)
 			return err;
 		err = pci_set_consistent_dma_mask(dev->bus->host_pci, mask);
 		return err;
+#endif
 	case SSB_BUSTYPE_SSB:
 		return dma_set_mask(dev->dev, mask);
 	default:
@@ -1188,6 +1192,7 @@ void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
 {
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
 		if (gfp_flags & GFP_DMA) {
 			/* Workaround: The PCI API does not support passing
 			 * a GFP flag. */
@@ -1195,6 +1200,7 @@ void * ssb_dma_alloc_consistent(struct ssb_device *dev, size_t size,
 						  size, dma_handle, gfp_flags);
 		}
 		return pci_alloc_consistent(dev->bus->host_pci, size, dma_handle);
+#endif
 	case SSB_BUSTYPE_SSB:
 		return dma_alloc_coherent(dev->dev, size, dma_handle, gfp_flags);
 	default:
@@ -1210,6 +1216,7 @@ void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
 {
 	switch (dev->bus->bustype) {
 	case SSB_BUSTYPE_PCI:
+#ifdef CONFIG_SSB_PCIHOST
 		if (gfp_flags & GFP_DMA) {
 			/* Workaround: The PCI API does not support passing
 			 * a GFP flag. */
@@ -1220,6 +1227,7 @@ void ssb_dma_free_consistent(struct ssb_device *dev, size_t size,
 		pci_free_consistent(dev->bus->host_pci, size,
 				    vaddr, dma_handle);
 		return;
+#endif
 	case SSB_BUSTYPE_SSB:
 		dma_free_coherent(dev->dev, size, vaddr, dma_handle);
 		return;
-- 
GitLab


From 37465c8a3ec7279e3314623d1e2d2a50c10cf79f Mon Sep 17 00:00:00 2001
From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Date: Thu, 7 Aug 2008 19:34:01 +0200
Subject: [PATCH 144/869] ath5k: Don't fiddle with MSI on suspend/resume.

Commit 256b152b005e319f985f50f2a910a75ba0def74f (ath5k: don't enable
MSI, we cannot handle it yet) has removed msi support, but overlooked
the suspend/resume code. This patch completes msi removal.

I don't consider this patch copyrightable, and thus put it into the
public domain. The result is of course a base.c file dual-licensed under
3-clause-BSD and GPL.

Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Acked-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath5k/base.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 2028866f599..f19f33c4e33 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -587,7 +587,6 @@ ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	ath5k_stop_hw(sc);
 
 	free_irq(pdev->irq, sc);
-	pci_disable_msi(pdev);
 	pci_save_state(pdev);
 	pci_disable_device(pdev);
 	pci_set_power_state(pdev, PCI_D3hot);
@@ -616,12 +615,10 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	 */
 	pci_write_config_byte(pdev, 0x41, 0);
 
-	pci_enable_msi(pdev);
-
 	err = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
 	if (err) {
 		ATH5K_ERR(sc, "request_irq failed\n");
-		goto err_msi;
+		goto err_no_irq;
 	}
 
 	err = ath5k_init(sc);
@@ -642,8 +639,7 @@ ath5k_pci_resume(struct pci_dev *pdev)
 	return 0;
 err_irq:
 	free_irq(pdev->irq, sc);
-err_msi:
-	pci_disable_msi(pdev);
+err_no_irq:
 	pci_disable_device(pdev);
 	return err;
 }
-- 
GitLab


From a61dae1f784f0c4ced0d47721c0efc7033231522 Mon Sep 17 00:00:00 2001
From: Ron Rindjunsky <ron.rindjunsky@intel.com>
Date: Sun, 10 Aug 2008 00:54:34 +0300
Subject: [PATCH 145/869] mac80211: update new sta's rx timestamp

This patch fixes needless probe request caused by zero value in
sta->last_rx inside ieee80211_associated flow

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mlme.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index e1d11c9b672..1e97fb9fb34 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2103,6 +2103,8 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 			rcu_read_unlock();
 			return;
 		}
+		/* update new sta with its last rx activity */
+		sta->last_rx = jiffies;
 	}
 
 	/*
-- 
GitLab


From a58d452290aafae30b021c8bf185853b1aaf2092 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Sun, 10 Aug 2008 10:19:33 -0500
Subject: [PATCH 146/869] b43: Fix for SPROM coding error in Linksys WMP54G
 (BCM4306/3)

The Linksys WMP54G (BCM4306/3) card in a PCI format has an SPROM coding
error and needs the fix found for several other cards.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 3bf3a869361..ee462b51410 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4616,6 +4616,7 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
 		pdev = bus->host_pci;
 		if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
+		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
 			bus->sprom.boardflags_lo &= ~B43_BFL_BTCOEXIST;
 	}
-- 
GitLab


From fcd7cc1496681f7241ef8b80f32bb35d72a4e78b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?matthieu=20Barth=C3=A9lemy?= <bonsouere@gmail.com>
Date: Sun, 10 Aug 2008 23:34:59 -0500
Subject: [PATCH 147/869] rtl8187: Add USB ID for Netgear WG111V3
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Add the USB ID for a Netgear WG111v3.

Signed-off-by: matthieu Barthélemy <bonsouere@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rtl8187_dev.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index 57376fb993e..ca5deb6244e 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -40,6 +40,7 @@ static struct usb_device_id rtl8187_table[] __devinitdata = {
 	/* Netgear */
 	{USB_DEVICE(0x0846, 0x6100), .driver_info = DEVICE_RTL8187},
 	{USB_DEVICE(0x0846, 0x6a00), .driver_info = DEVICE_RTL8187},
+	{USB_DEVICE(0x0846, 0x4260), .driver_info = DEVICE_RTL8187B},
 	/* HP */
 	{USB_DEVICE(0x03f0, 0xca02), .driver_info = DEVICE_RTL8187},
 	/* Sitecom */
-- 
GitLab


From 6f14792610905fe006c0c3c4d9e1478fb6be7cec Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 11 Aug 2008 23:49:41 +0200
Subject: [PATCH 148/869] iwlwifi: fix printk newlines

Add newlines at printk outputs to not break dmesg.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Zhu Yi <yi.zhu@intel.com>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-4965.c     | 2 +-
 drivers/net/wireless/iwlwifi/iwl-eeprom.c   | 6 +++---
 drivers/net/wireless/iwlwifi/iwl-sta.c      | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-tx.c       | 4 ++--
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 6 +++---
 5 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 22bb26985c2..4a0cc78d55e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -967,7 +967,7 @@ static int iwl4965_interpolate_chan(struct iwl_priv *priv, u32 channel,
 
 	s = iwl4965_get_sub_band(priv, channel);
 	if (s >= EEPROM_TX_POWER_BANDS) {
-		IWL_ERROR("Tx Power can not find channel %d ", channel);
+		IWL_ERROR("Tx Power can not find channel %d\n", channel);
 		return -1;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index bce53830b30..19985bf0dcc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -146,7 +146,7 @@ int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
 {
 	u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
 	if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		return -ENOENT;
 	}
 	return 0;
@@ -227,7 +227,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 
 	ret = priv->cfg->ops->lib->eeprom_ops.verify_signature(priv);
 	if (ret < 0) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		ret = -ENOENT;
 		goto err;
 	}
@@ -254,7 +254,7 @@ int iwl_eeprom_init(struct iwl_priv *priv)
 		}
 
 		if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
-			IWL_ERROR("Time out reading EEPROM[%d]", addr);
+			IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
 			ret = -ETIMEDOUT;
 			goto done;
 		}
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 60a6e010603..6283a3a707f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -207,7 +207,7 @@ static void iwl_set_ht_add_station(struct iwl_priv *priv, u8 index,
 	case WLAN_HT_CAP_MIMO_PS_DISABLED:
 		break;
 	default:
-		IWL_WARNING("Invalid MIMO PS mode %d", mimo_ps_mode);
+		IWL_WARNING("Invalid MIMO PS mode %d\n", mimo_ps_mode);
 		break;
 	}
 
@@ -969,7 +969,7 @@ int iwl_get_sta_id(struct iwl_priv *priv, struct ieee80211_hdr *hdr)
 		return priv->hw_params.bcast_sta_id;
 
 	default:
-		IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
+		IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
 		return priv->hw_params.bcast_sta_id;
 	}
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 4108c7c8f00..d82823b5c8a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -493,7 +493,7 @@ int iwl_txq_ctx_reset(struct iwl_priv *priv)
 	/* Alloc keep-warm buffer */
 	ret = iwl_kw_alloc(priv);
 	if (ret) {
-		IWL_ERROR("Keep Warm allocation failed");
+		IWL_ERROR("Keep Warm allocation failed\n");
 		goto error_kw;
 	}
 	spin_lock_irqsave(&priv->lock, flags);
@@ -1463,7 +1463,7 @@ void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 	u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);
 
 	if (scd_flow >= priv->hw_params.max_txq_num) {
-		IWL_ERROR("BUG_ON scd_flow is bigger than number of queues");
+		IWL_ERROR("BUG_ON scd_flow is bigger than number of queues\n");
 		return;
 	}
 
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 444847ab1b5..348048a4b6c 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1558,7 +1558,7 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv)
 	BUILD_BUG_ON(sizeof(priv->eeprom) != IWL_EEPROM_IMAGE_SIZE);
 
 	if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
-		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x", gp);
+		IWL_ERROR("EEPROM not found, EEPROM_GP=0x%08x\n", gp);
 		return -ENOENT;
 	}
 
@@ -1583,7 +1583,7 @@ int iwl3945_eeprom_init(struct iwl3945_priv *priv)
 		}
 
 		if (!(r & CSR_EEPROM_REG_READ_VALID_MSK)) {
-			IWL_ERROR("Time out reading EEPROM[%d]", addr);
+			IWL_ERROR("Time out reading EEPROM[%d]\n", addr);
 			return -ETIMEDOUT;
 		}
 		e[addr / 2] = le16_to_cpu((__force __le16)(r >> 16));
@@ -2507,7 +2507,7 @@ static int iwl3945_get_sta_id(struct iwl3945_priv *priv, struct ieee80211_hdr *h
 		return priv->hw_setting.bcast_sta_id;
 
 	default:
-		IWL_WARNING("Unknown mode of operation: %d", priv->iw_mode);
+		IWL_WARNING("Unknown mode of operation: %d\n", priv->iw_mode);
 		return priv->hw_setting.bcast_sta_id;
 	}
 }
-- 
GitLab


From 69bbc7dc9f59fedb6067c7f9f9f9bc1da27407ad Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Wed, 13 Aug 2008 23:41:45 +0200
Subject: [PATCH 149/869] p54: move p54_vdcf_init to the right place.

priv->tx_hdr_len is set by the driver _after_ it called p54_init_common.
While this isn't much a problem for any PCI or ISL3887 cards/sticks,
because they don't need any extra header and therefore tx_hdr_len is
zero for them...

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54common.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 49afd20d2c3..29be3dc8ee0 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -837,10 +837,21 @@ static int p54_start(struct ieee80211_hw *dev)
 	struct p54_common *priv = dev->priv;
 	int err;
 
+	if (!priv->cached_vdcf) {
+		priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf)+
+			priv->tx_hdr_len + sizeof(struct p54_control_hdr),
+			GFP_KERNEL);
+
+		if (!priv->cached_vdcf)
+			return -ENOMEM;
+	}
+
 	err = priv->open(dev);
 	if (!err)
 		priv->mode = IEEE80211_IF_TYPE_MNTR;
 
+	p54_init_vdcf(dev);
+
 	return err;
 }
 
@@ -1020,15 +1031,6 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
 	dev->extra_tx_headroom = sizeof(struct p54_control_hdr) + 4 +
 				 sizeof(struct p54_tx_control_allocdata);
 
-        priv->cached_vdcf = kzalloc(sizeof(struct p54_tx_control_vdcf) +
-              priv->tx_hdr_len + sizeof(struct p54_control_hdr), GFP_KERNEL);
-
-	if (!priv->cached_vdcf) {
-		ieee80211_free_hw(dev);
-		return NULL;
-	}
-
-	p54_init_vdcf(dev);
 	mutex_init(&priv->conf_mutex);
 
 	return dev;
-- 
GitLab


From d47c3cebf5aae9d72b2cc18e5ac3b520fdbb0bca Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@web.de>
Date: Wed, 13 Aug 2008 23:41:48 +0200
Subject: [PATCH 150/869] p54u: reset skb's data/tail pointer on requeue

(Only important for USB V1 Adaptors)

If an incoming frame wasn't accepted by p54_rx function
the skb will be reused for new frames...

But, we must not forget to set the skb's data pointers into
the same state in which it was initialized by p54u_init_urbs.

Otherwise we either end up with 16 bytes less on every requeue,
or if a new frame is worthy enough to be accepted, the data is
in the wrong place (urb->transfer_buffer wasn't updated!) and mac80211
has a hard time to recognize it...

Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/p54/p54usb.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 815c095ef79..cbaca23a945 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -109,7 +109,17 @@ static void p54u_rx_cb(struct urb *urb)
 		urb->context = skb;
 		skb_queue_tail(&priv->rx_queue, skb);
 	} else {
+		if (!priv->hw_type)
+			skb_push(skb, sizeof(struct net2280_tx_hdr));
+
+		skb_reset_tail_pointer(skb);
 		skb_trim(skb, 0);
+		if (urb->transfer_buffer != skb_tail_pointer(skb)) {
+			/* this should not happen */
+			WARN_ON(1);
+			urb->transfer_buffer = skb_tail_pointer(skb);
+		}
+
 		skb_queue_tail(&priv->rx_queue, skb);
 	}
 
-- 
GitLab


From 546c80c91f8d847477ee8354aad26f116048169d Mon Sep 17 00:00:00 2001
From: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Date: Thu, 14 Aug 2008 11:43:20 -0700
Subject: [PATCH 151/869] mac80211: remove kdoc references to
 IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE

IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE was made unnecessary in
the recent revamp on beacon configuration.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 include/net/mac80211.h | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index b397e4d984c..ff137fd7714 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -708,10 +708,7 @@ enum ieee80211_tkip_key_type {
  *	rely on the host system for such buffering. This option is used
  *	to configure the IEEE 802.11 upper layer to buffer broadcast and
  *	multicast frames when there are power saving stations so that
- *	the driver can fetch them with ieee80211_get_buffered_bc(). Note
- *	that not setting this flag works properly only when the
- *	%IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is also not set because
- *	otherwise the stack will not know when the DTIM beacon was sent.
+ *	the driver can fetch them with ieee80211_get_buffered_bc().
  *
  * @IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE:
  *	Hardware is not capable of short slot operation on the 2.4 GHz band.
@@ -1099,10 +1096,8 @@ enum ieee80211_ampdu_mlme_action {
  *	See the section "Frame filtering" for more information.
  *	This callback must be implemented and atomic.
  *
- * @set_tim: Set TIM bit. If the hardware/firmware takes care of beacon
- *	generation (that is, %IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE is set)
- *	mac80211 calls this function when a TIM bit must be set or cleared
- *	for a given AID. Must be atomic.
+ * @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
+ * 	must be set or cleared for a given AID. Must be atomic.
  *
  * @set_key: See the section "Hardware crypto acceleration"
  *	This callback can sleep, and is only called between add_interface
-- 
GitLab


From 430cd47fa98178b5199105fab4fb74e04bd0635c Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Thu, 14 Aug 2008 18:57:11 -0500
Subject: [PATCH 152/869] b43: Fix for another Bluetooth Coexistence SPROM
 Programming error for BCM4306

In trying to help users on the Ubuntu Bugzilla, I discovered another
BCM4306 with the Bluetooth Coexistence programming error in the SPROM.

This patch is contingent on the one that added the Linksys device with
subdevice code of 0x0014.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/b43/main.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index ee462b51410..8e09982fded 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4615,6 +4615,7 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
 	if (bus->bustype == SSB_BUSTYPE_PCI) {
 		pdev = bus->host_pci;
 		if (IS_PDEV(pdev, BROADCOM, 0x4318, ASUSTEK, 0x100F) ||
+		    IS_PDEV(pdev, BROADCOM, 0x4320,    DELL, 0x0003) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0015) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0014) ||
 		    IS_PDEV(pdev, BROADCOM, 0x4320, LINKSYS, 0x0013))
-- 
GitLab


From f126cba427170eac9e37311b2ab7afc0e2261906 Mon Sep 17 00:00:00 2001
From: Jochen Friedrich <jochen@scram.de>
Date: Fri, 15 Aug 2008 14:47:46 +0200
Subject: [PATCH 153/869] rt2x00: Fix txdone_entry_desc_flags

txdone_entry_desc_flags is used with __set_bit and test_bit which
bit-shift the values, so don't bit-shift the flags in the enum.
Also make sure flags are initialized before being used.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00queue.h | 8 ++++----
 drivers/net/wireless/rt2x00/rt2x00usb.c   | 1 +
 2 files changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index a4a8c57004d..ff78e52ce43 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -173,10 +173,10 @@ struct rxdone_entry_desc {
  *	frame transmission failed due to excessive retries.
  */
 enum txdone_entry_desc_flags {
-	TXDONE_UNKNOWN = 1 << 0,
-	TXDONE_SUCCESS = 1 << 1,
-	TXDONE_FAILURE = 1 << 2,
-	TXDONE_EXCESSIVE_RETRY = 1 << 3,
+	TXDONE_UNKNOWN,
+	TXDONE_SUCCESS,
+	TXDONE_FAILURE,
+	TXDONE_EXCESSIVE_RETRY,
 };
 
 /**
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index 8d76bb2e031..2050227ea53 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -181,6 +181,7 @@ static void rt2x00usb_interrupt_txdone(struct urb *urb)
 	 * (Only indirectly by looking at the failed TX counters
 	 * in the register).
 	 */
+	txdesc.flags = 0;
 	if (!urb->status)
 		__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
 	else
-- 
GitLab


From 3eb75aac8907e7ea36f0d078b2cc7393986001cf Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sun, 17 Aug 2008 07:50:47 +0800
Subject: [PATCH 154/869] removed unused #include <version.h>

The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/net/wireless/ath5k/base.c
  drivers/net/wireless/b43/main.c
  drivers/net/wireless/ipw2100.c
  drivers/net/wireless/ipw2200.c
  drivers/net/wireless/iwlwifi/iwl-3945.c
  drivers/net/wireless/iwlwifi/iwl-4965.c
  drivers/net/wireless/iwlwifi/iwl-5000.c
  drivers/net/wireless/iwlwifi/iwl-agn.c
  drivers/net/wireless/iwlwifi/iwl-core.c
  drivers/net/wireless/iwlwifi/iwl-eeprom.c
  drivers/net/wireless/iwlwifi/iwl-hcmd.c
  drivers/net/wireless/iwlwifi/iwl-power.c
  drivers/net/wireless/iwlwifi/iwl3945-base.c

This patch removes the said #include <version.h>.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath5k/base.c           | 1 -
 drivers/net/wireless/b43/main.c             | 1 -
 drivers/net/wireless/ipw2100.c              | 1 -
 drivers/net/wireless/ipw2200.c              | 1 -
 drivers/net/wireless/iwlwifi/iwl-3945.c     | 1 -
 drivers/net/wireless/iwlwifi/iwl-4965.c     | 1 -
 drivers/net/wireless/iwlwifi/iwl-5000.c     | 1 -
 drivers/net/wireless/iwlwifi/iwl-agn.c      | 1 -
 drivers/net/wireless/iwlwifi/iwl-core.c     | 1 -
 drivers/net/wireless/iwlwifi/iwl-eeprom.c   | 1 -
 drivers/net/wireless/iwlwifi/iwl-hcmd.c     | 1 -
 drivers/net/wireless/iwlwifi/iwl-power.c    | 1 -
 drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 -
 13 files changed, 13 deletions(-)

diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index f19f33c4e33..b20a45aa868 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -40,7 +40,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/delay.h>
 #include <linux/hardirq.h>
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 8e09982fded..7205a936ec7 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -33,7 +33,6 @@
 #include <linux/moduleparam.h>
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
-#include <linux/version.h>
 #include <linux/firmware.h>
 #include <linux/wireless.h>
 #include <linux/workqueue.h>
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
index c6f886ec08a..19a401c4a0d 100644
--- a/drivers/net/wireless/ipw2100.c
+++ b/drivers/net/wireless/ipw2100.c
@@ -157,7 +157,6 @@ that only one external action is invoked at a time.
 #include <linux/stringify.h>
 #include <linux/tcp.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/time.h>
 #include <linux/firmware.h>
 #include <linux/acpi.h>
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index 36e8d2f6e7b..dcce3542d5a 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -31,7 +31,6 @@
 ******************************************************************************/
 
 #include "ipw2200.h"
-#include <linux/version.h>
 
 
 #ifndef KBUILD_EXTMOD
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index b3931f6135a..3f51f363534 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -26,7 +26,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 4a0cc78d55e..e2581229d8b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -26,7 +26,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index f3d139b663e..cbc01a00eaf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -25,7 +25,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index ed09e48b1b6..061ffba9c88 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -29,7 +29,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 9bd61809129..c72f72579be 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -28,7 +28,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <net/mac80211.h>
 
 struct iwl_priv; /* FIXME: remove */
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 19985bf0dcc..37155755efc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -63,7 +63,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 
 #include <net/mac80211.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 6512834bb91..2eb03eea190 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -28,7 +28,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <net/mac80211.h>
 
 #include "iwl-dev.h" /* FIXME: remove */
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 028e3053c0c..a099c9e30e5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -29,7 +29,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 
 #include <net/mac80211.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 348048a4b6c..b775d5bab66 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -29,7 +29,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
-- 
GitLab


From a69999e286b5da33232694a2ad99c29419b91a44 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Mon, 18 Aug 2008 21:40:03 +0200
Subject: [PATCH 155/869] drivers/ide/pci/: use __devexit_p()

This patch adds missing __devexit_p's.

Reported-by: Russell King <rmk+lkml@arm.linux.org.uk>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/aec62xx.c      | 2 +-
 drivers/ide/pci/cy82c693.c     | 2 +-
 drivers/ide/pci/hpt366.c       | 2 +-
 drivers/ide/pci/it821x.c       | 2 +-
 drivers/ide/pci/pdc202xx_new.c | 2 +-
 drivers/ide/pci/scc_pata.c     | 2 +-
 drivers/ide/pci/siimage.c      | 2 +-
 drivers/ide/pci/sis5513.c      | 2 +-
 drivers/ide/pci/tc86c001.c     | 2 +-
 drivers/ide/pci/via82cxxx.c    | 2 +-
 10 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index 40644b6f1c0..3187215e8f8 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -307,7 +307,7 @@ static struct pci_driver driver = {
 	.name		= "AEC62xx_IDE",
 	.id_table	= aec62xx_pci_tbl,
 	.probe		= aec62xx_init_one,
-	.remove		= aec62xx_remove,
+	.remove		= __devexit_p(aec62xx_remove),
 };
 
 static int __init aec62xx_ide_init(void)
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index bfae2f882f4..e6d8ee88d56 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -447,7 +447,7 @@ static struct pci_driver driver = {
 	.name		= "Cypress_IDE",
 	.id_table	= cy82c693_pci_tbl,
 	.probe		= cy82c693_init_one,
-	.remove		= cy82c693_remove,
+	.remove		= __devexit_p(cy82c693_remove),
 };
 
 static int __init cy82c693_ide_init(void)
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 748793a413a..eb107eef0db 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -1620,7 +1620,7 @@ static struct pci_driver driver = {
 	.name		= "HPT366_IDE",
 	.id_table	= hpt366_pci_tbl,
 	.probe		= hpt366_init_one,
-	.remove		= hpt366_remove,
+	.remove		= __devexit_p(hpt366_remove),
 };
 
 static int __init hpt366_ide_init(void)
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index b6dc723de70..4a1508a707c 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -686,7 +686,7 @@ static struct pci_driver driver = {
 	.name		= "ITE821x IDE",
 	.id_table	= it821x_pci_tbl,
 	.probe		= it821x_init_one,
-	.remove		= it821x_remove,
+	.remove		= __devexit_p(it821x_remove),
 };
 
 static int __init it821x_ide_init(void)
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 0f609b72f47..d477da6b585 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -566,7 +566,7 @@ static struct pci_driver driver = {
 	.name		= "Promise_IDE",
 	.id_table	= pdc202new_pci_tbl,
 	.probe		= pdc202new_init_one,
-	.remove		= pdc202new_remove,
+	.remove		= __devexit_p(pdc202new_remove),
 };
 
 static int __init pdc202new_ide_init(void)
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
index 6cde48bba6f..44cccd1e086 100644
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -954,7 +954,7 @@ static struct pci_driver driver = {
 	.name = "SCC IDE",
 	.id_table = scc_pci_tbl,
 	.probe = scc_init_one,
-	.remove = scc_remove,
+	.remove = __devexit_p(scc_remove),
 };
 
 static int scc_ide_init(void)
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 445ce6fbea3..db2b88a369a 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -832,7 +832,7 @@ static struct pci_driver driver = {
 	.name		= "SiI_IDE",
 	.id_table	= siimage_pci_tbl,
 	.probe		= siimage_init_one,
-	.remove		= siimage_remove,
+	.remove		= __devexit_p(siimage_remove),
 };
 
 static int __init siimage_ide_init(void)
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index e5a4b42b4e3..5efe21d6ef9 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -610,7 +610,7 @@ static struct pci_driver driver = {
 	.name		= "SIS_IDE",
 	.id_table	= sis5513_pci_tbl,
 	.probe		= sis5513_init_one,
-	.remove		= sis5513_remove,
+	.remove		= __devexit_p(sis5513_remove),
 };
 
 static int __init sis5513_ide_init(void)
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
index 7fc88c375e5..927277c54ec 100644
--- a/drivers/ide/pci/tc86c001.c
+++ b/drivers/ide/pci/tc86c001.c
@@ -249,7 +249,7 @@ static struct pci_driver driver = {
 	.name		= "TC86C001",
 	.id_table	= tc86c001_pci_tbl,
 	.probe		= tc86c001_init_one,
-	.remove		= tc86c001_remove,
+	.remove		= __devexit_p(tc86c001_remove),
 };
 
 static int __init tc86c001_ide_init(void)
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index a6b2cc83f29..94fb9ab3223 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -491,7 +491,7 @@ static struct pci_driver driver = {
 	.name 		= "VIA_IDE",
 	.id_table 	= via_pci_tbl,
 	.probe 		= via_init_one,
-	.remove		= via_remove,
+	.remove		= __devexit_p(via_remove),
 };
 
 static int __init via_ide_init(void)
-- 
GitLab


From 1f49060adcc1817337af95392bdf8a6205abffa0 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Mon, 18 Aug 2008 21:40:03 +0200
Subject: [PATCH 156/869] cleanup powerpc/include/asm/ide.h

This patch removes code that became unused through IDE changes and the
arch/ppc/ removal.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 arch/powerpc/include/asm/ide.h | 43 +---------------------------------
 1 file changed, 1 insertion(+), 42 deletions(-)

diff --git a/arch/powerpc/include/asm/ide.h b/arch/powerpc/include/asm/ide.h
index 048480e340f..da01b20aea5 100644
--- a/arch/powerpc/include/asm/ide.h
+++ b/arch/powerpc/include/asm/ide.h
@@ -6,12 +6,7 @@
 #ifndef _ASM_POWERPC_IDE_H
 #define _ASM_POWERPC_IDE_H
 
-#ifdef __KERNEL__
-
-#ifndef __powerpc64__
-#include <linux/sched.h>
-#include <asm/mpc8xx.h>
-#endif
+#include <linux/compiler.h>
 #include <asm/io.h>
 
 #define __ide_mm_insw(p, a, c)	readsw((void __iomem *)(p), (a), (c))
@@ -19,40 +14,4 @@
 #define __ide_mm_outsw(p, a, c)	writesw((void __iomem *)(p), (a), (c))
 #define __ide_mm_outsl(p, a, c)	writesl((void __iomem *)(p), (a), (c))
 
-#ifndef  __powerpc64__
-#include <linux/ioport.h>
-
-/* FIXME: use ide_platform host driver */
-static __inline__ int ide_default_irq(unsigned long base)
-{
-#ifdef CONFIG_PPLUS
-	switch (base) {
-	case 0x1f0:	return 14;
-	case 0x170:	return 15;
-	}
-#endif
-	return 0;
-}
-
-/* FIXME: use ide_platform host driver */
-static __inline__ unsigned long ide_default_io_base(int index)
-{
-#ifdef CONFIG_PPLUS
-	switch (index) {
-	case 0:		return 0x1f0;
-	case 1:		return 0x170;
-	}
-#endif
-	return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
-#define IDE_ARCH_ACK_INTR  1
-#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
-#endif
-
-#endif /* __powerpc64__ */
-
-#endif /* __KERNEL__ */
-
 #endif /* _ASM_POWERPC_IDE_H */
-- 
GitLab


From 3e636f78e5bbe95831e4d0071ee8f40b507e1cbd Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Mon, 18 Aug 2008 21:40:03 +0200
Subject: [PATCH 157/869] viocd: add dummy audio ioctl handler

Make sure audio_ioctl is always defined even if being a dummy function
since the cdrom_ioctl interface assumes its existence and we don't
want to BUG on null ptr on some ioctls like, e.g. CDROMREADTOCENTRY,
CDROMREADTOCHDR etc. when we fix CDC_PLAY_AUDIO checking in cdrom.c.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/cdrom/viocd.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 9d0dfe6e0d6..031e0e1a1a3 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -550,12 +550,19 @@ return_complete:
 	}
 }
 
+static int viocd_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+			     void *arg)
+{
+	return -EINVAL;
+}
+
 static struct cdrom_device_ops viocd_dops = {
 	.open = viocd_open,
 	.release = viocd_release,
 	.media_changed = viocd_media_changed,
 	.lock_door = viocd_lock_door,
 	.generic_packet = viocd_packet,
+	.audio_ioctl = viocd_audio_ioctl,
 	.capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK | CDC_SELECT_SPEED | CDC_SELECT_DISC | CDC_MULTI_SESSION | CDC_MCN | CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_RESET | CDC_DRIVE_STATUS | CDC_GENERIC_PACKET | CDC_CD_R | CDC_CD_RW | CDC_DVD | CDC_DVD_R | CDC_DVD_RAM | CDC_RAM
 };
 
-- 
GitLab


From d15cad5df1dac17ae33152646f599f0bdc6be48e Mon Sep 17 00:00:00 2001
From: Borislav Petkov <petkovbb@gmail.com>
Date: Mon, 18 Aug 2008 21:40:04 +0200
Subject: [PATCH 158/869] gdrom: add dummy audio_ioctl handler

Make sure audio_ioctl is always defined even if being a dummy function
since the cdrom_ioctl interface assumes its existence and we don't
want to BUG on null ptr on some ioctls like, e.g. CDROMREADTOCENTRY,
CDROMREADTOCHDR etc. when we fix CDC_PLAY_AUDIO checking in cdrom.c.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Acked-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/cdrom/gdrom.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/cdrom/gdrom.c b/drivers/cdrom/gdrom.c
index 1e0455bd6df..1231d95aa69 100644
--- a/drivers/cdrom/gdrom.c
+++ b/drivers/cdrom/gdrom.c
@@ -471,6 +471,12 @@ cleanup_sense_final:
 	return err;
 }
 
+static int gdrom_audio_ioctl(struct cdrom_device_info *cdi, unsigned int cmd,
+			     void *arg)
+{
+	return -EINVAL;
+}
+
 static struct cdrom_device_ops gdrom_ops = {
 	.open			= gdrom_open,
 	.release		= gdrom_release,
@@ -478,6 +484,7 @@ static struct cdrom_device_ops gdrom_ops = {
 	.media_changed		= gdrom_mediachanged,
 	.get_last_session	= gdrom_get_last_session,
 	.reset			= gdrom_hardreset,
+	.audio_ioctl		= gdrom_audio_ioctl,
 	.capability		= CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
 				  CDC_RESET | CDC_DRIVE_STATUS | CDC_CD_R,
 	.n_minors		= 1,
-- 
GitLab


From bce31b674846584f0a80c95b6c09f07c32b9b041 Mon Sep 17 00:00:00 2001
From: Alexander Inyukhin <shurick@sectorb.msk.ru>
Date: Mon, 18 Aug 2008 21:40:04 +0200
Subject: [PATCH 159/869] cdrom: handle TOC

This patch should fix TOC handling for cdroms that can not play audio.  It
extends commit af744e3294d09d706c4eae26cffaaa68a8d40337 ("cdrom: don't
check CDC_PLAY_AUDIO in cdrom_count_tracks()") with a safety check and
non-audio ioctls support.

Since CDC_PLAY_AUDIO flag was used not only to check ability to play audio
but also to ensure that audio_ioctl was not NULL, all TOC-related
operations had to use it.

As far as I understand, now audio_ioctl is never NULL, so a sanity check
during device registration should be sufficient.

It was tested on Optiarc AD7203A device, that has no ability to play
audio.

Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Borislav Petkov <petkovbb@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[bart: remove now unneeded ->audio_ioctl check (noticed by Borislav)]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/cdrom/cdrom.c | 7 -------
 1 file changed, 7 deletions(-)

diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index d9d1b65d206..74031de517e 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -408,7 +408,6 @@ int register_cdrom(struct cdrom_device_info *cdi)
 	ENSURE(get_last_session, CDC_MULTI_SESSION);
 	ENSURE(get_mcn, CDC_MCN);
 	ENSURE(reset, CDC_RESET);
-	ENSURE(audio_ioctl, CDC_PLAY_AUDIO);
 	ENSURE(generic_packet, CDC_GENERIC_PACKET);
 	cdi->mc_flags = 0;
 	cdo->n_minors = 0;
@@ -2506,8 +2505,6 @@ static int cdrom_ioctl_get_subchnl(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL,"entering CDROMSUBCHNL\n");*/
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&q, argp, sizeof(q)))
 		return -EFAULT;
 
@@ -2538,8 +2535,6 @@ static int cdrom_ioctl_read_tochdr(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCHDR\n"); */
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&header, argp, sizeof(header)))
 		return -EFAULT;
 
@@ -2562,8 +2557,6 @@ static int cdrom_ioctl_read_tocentry(struct cdrom_device_info *cdi,
 
 	/* cdinfo(CD_DO_IOCTL, "entering CDROMREADTOCENTRY\n"); */
 
-	if (!CDROM_CAN(CDC_PLAY_AUDIO))
-		return -ENOSYS;
 	if (copy_from_user(&entry, argp, sizeof(entry)))
 		return -EFAULT;
 
-- 
GitLab


From fc99856a45cab8040f07d93d52fabd11834bf544 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Mon, 18 Aug 2008 21:40:04 +0200
Subject: [PATCH 160/869] ide-cd: use bcd2bin/bin2bcd

Change ide-cd to use the new bcd2bin/bin2bcd functions instead of the
obsolete BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-cd.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 89a112d513a..49a8c589e34 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1272,9 +1272,9 @@ static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
  */
 static void msf_from_bcd(struct atapi_msf *msf)
 {
-	msf->minute = BCD2BIN(msf->minute);
-	msf->second = BCD2BIN(msf->second);
-	msf->frame  = BCD2BIN(msf->frame);
+	msf->minute = bcd2bin(msf->minute);
+	msf->second = bcd2bin(msf->second);
+	msf->frame  = bcd2bin(msf->frame);
 }
 
 int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
@@ -1415,8 +1415,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 		return stat;
 
 	if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-		toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
-		toc->hdr.last_track  = BCD2BIN(toc->hdr.last_track);
+		toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+		toc->hdr.last_track  = bcd2bin(toc->hdr.last_track);
 	}
 
 	ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
@@ -1456,8 +1456,8 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 			return stat;
 
 		if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-			toc->hdr.first_track = (u8)BIN2BCD(CDROM_LEADOUT);
-			toc->hdr.last_track = (u8)BIN2BCD(CDROM_LEADOUT);
+			toc->hdr.first_track = (u8)bin2bcd(CDROM_LEADOUT);
+			toc->hdr.last_track = (u8)bin2bcd(CDROM_LEADOUT);
 		} else {
 			toc->hdr.first_track = CDROM_LEADOUT;
 			toc->hdr.last_track = CDROM_LEADOUT;
@@ -1470,14 +1470,14 @@ int ide_cd_read_toc(ide_drive_t *drive, struct request_sense *sense)
 	toc->hdr.toc_length = be16_to_cpu(toc->hdr.toc_length);
 
 	if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD) {
-		toc->hdr.first_track = BCD2BIN(toc->hdr.first_track);
-		toc->hdr.last_track  = BCD2BIN(toc->hdr.last_track);
+		toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
+		toc->hdr.last_track  = bcd2bin(toc->hdr.last_track);
 	}
 
 	for (i = 0; i <= ntracks; i++) {
 		if (drive->atapi_flags & IDE_AFLAG_TOCADDR_AS_BCD) {
 			if (drive->atapi_flags & IDE_AFLAG_TOCTRACKS_AS_BCD)
-				toc->ent[i].track = BCD2BIN(toc->ent[i].track);
+				toc->ent[i].track = bcd2bin(toc->ent[i].track);
 			msf_from_bcd(&toc->ent[i].addr.msf);
 		}
 		toc->ent[i].addr.lba = msf_to_lba(toc->ent[i].addr.msf.minute,
-- 
GitLab


From 1b427a33b06ae76c64c1ad9af899a45b682ba6c6 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Aug 2008 21:40:04 +0200
Subject: [PATCH 161/869] sgiioc4: fixup message on resource allocation failure

There can be more than one sgiioc4 card in the system so print
also PCI device name on resource allocation failure (so we know
which one is the problematic one).

Reported-by: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/pci/sgiioc4.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
index 42eef19a18f..681306c9d79 100644
--- a/drivers/ide/pci/sgiioc4.c
+++ b/drivers/ide/pci/sgiioc4.c
@@ -621,9 +621,9 @@ sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
 	if (!request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
 	    DRV_NAME)) {
 		printk(KERN_ERR
-			"%s : %s -- ERROR, Addresses "
+			"%s %s: -- ERROR, Addresses "
 			"0x%p to 0x%p ALREADY in use\n",
-		       __func__, DRV_NAME, (void *) cmd_phys_base,
+		       DRV_NAME, pci_name(dev), (void *)cmd_phys_base,
 		       (void *) cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
 		return -ENOMEM;
 	}
-- 
GitLab


From 37014c64079748c47fd109ef2d91ecd785a8c764 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Aug 2008 21:40:05 +0200
Subject: [PATCH 162/869] ata: add missing ATA_ID_* defines (take 2)

Add missing ATA_ID_* defines and update {ata,atapi}_*()
inlines accordingly.  The currently unused defines are
needed for the forthcoming drivers/ide/ changes.

v2:
Add ATA_ID_SPG.

Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/linux/ata.h | 122 +++++++++++++++++++++++++++-----------------
 1 file changed, 76 insertions(+), 46 deletions(-)

diff --git a/include/linux/ata.h b/include/linux/ata.h
index 1c622e2b050..03fff6239b3 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -46,18 +46,48 @@ enum {
 	ATA_MAX_SECTORS_TAPE	= 65535,
 
 	ATA_ID_WORDS		= 256,
+	ATA_ID_CONFIG		= 0,
+	ATA_ID_CYLS		= 1,
+	ATA_ID_HEADS		= 3,
+	ATA_ID_SECTORS		= 6,
 	ATA_ID_SERNO		= 10,
+	ATA_ID_BUF_SIZE		= 21,
 	ATA_ID_FW_REV		= 23,
 	ATA_ID_PROD		= 27,
+	ATA_ID_MAX_MULTSECT	= 47,
+	ATA_ID_DWORD_IO		= 48,
+	ATA_ID_CAPABILITY	= 49,
 	ATA_ID_OLD_PIO_MODES	= 51,
+	ATA_ID_OLD_DMA_MODES	= 52,
 	ATA_ID_FIELD_VALID	= 53,
+	ATA_ID_CUR_CYLS		= 54,
+	ATA_ID_CUR_HEADS	= 55,
+	ATA_ID_CUR_SECTORS	= 56,
+	ATA_ID_MULTSECT		= 59,
+	ATA_ID_LBA_CAPACITY	= 60,
+	ATA_ID_SWDMA_MODES	= 62,
 	ATA_ID_MWDMA_MODES	= 63,
 	ATA_ID_PIO_MODES	= 64,
 	ATA_ID_EIDE_DMA_MIN	= 65,
+	ATA_ID_EIDE_DMA_TIME	= 66,
 	ATA_ID_EIDE_PIO		= 67,
 	ATA_ID_EIDE_PIO_IORDY	= 68,
-	ATA_ID_UDMA_MODES	= 88,
+	ATA_ID_QUEUE_DEPTH	= 75,
 	ATA_ID_MAJOR_VER	= 80,
+	ATA_ID_COMMAND_SET_1	= 82,
+	ATA_ID_COMMAND_SET_2	= 83,
+	ATA_ID_CFSSE		= 84,
+	ATA_ID_CFS_ENABLE_1	= 85,
+	ATA_ID_CFS_ENABLE_2	= 86,
+	ATA_ID_CSF_DEFAULT	= 87,
+	ATA_ID_UDMA_MODES	= 88,
+	ATA_ID_HW_CONFIG	= 93,
+	ATA_ID_SPG		= 98,
+	ATA_ID_LBA_CAPACITY_2	= 100,
+	ATA_ID_LAST_LUN		= 126,
+	ATA_ID_DLF		= 128,
+	ATA_ID_CSFO		= 129,
+	ATA_ID_CFA_POWER	= 160,
 	ATA_ID_PIO4		= (1 << 1),
 
 	ATA_ID_SERNO_LEN	= 20,
@@ -438,17 +468,17 @@ static inline int ata_is_data(u8 prot)
 /*
  * id tests
  */
-#define ata_id_is_ata(id)	(((id)[0] & (1 << 15)) == 0)
-#define ata_id_has_lba(id)	((id)[49] & (1 << 9))
-#define ata_id_has_dma(id)	((id)[49] & (1 << 8))
+#define ata_id_is_ata(id)	(((id)[ATA_ID_CONFIG] & (1 << 15)) == 0)
+#define ata_id_has_lba(id)	((id)[ATA_ID_CAPABILITY] & (1 << 9))
+#define ata_id_has_dma(id)	((id)[ATA_ID_CAPABILITY] & (1 << 8))
 #define ata_id_has_ncq(id)	((id)[76] & (1 << 8))
-#define ata_id_queue_depth(id)	(((id)[75] & 0x1f) + 1)
-#define ata_id_removeable(id)	((id)[0] & (1 << 7))
+#define ata_id_queue_depth(id)	(((id)[ATA_ID_QUEUE_DEPTH] & 0x1f) + 1)
+#define ata_id_removeable(id)	((id)[ATA_ID_CONFIG] & (1 << 7))
 #define ata_id_has_atapi_AN(id)	\
 	( (((id)[76] != 0x0000) && ((id)[76] != 0xffff)) && \
 	  ((id)[78] & (1 << 5)) )
-#define ata_id_iordy_disable(id) ((id)[49] & (1 << 10))
-#define ata_id_has_iordy(id) ((id)[49] & (1 << 11))
+#define ata_id_iordy_disable(id) ((id)[ATA_ID_CAPABILITY] & (1 << 10))
+#define ata_id_has_iordy(id) ((id)[ATA_ID_CAPABILITY] & (1 << 11))
 #define ata_id_u32(id,n)	\
 	(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
 #define ata_id_u64(id,n)	\
@@ -457,7 +487,7 @@ static inline int ata_is_data(u8 prot)
 	  ((u64) (id)[(n) + 1] << 16) |	\
 	  ((u64) (id)[(n) + 0]) )
 
-#define ata_id_cdb_intr(id)	(((id)[0] & 0x60) == 0x20)
+#define ata_id_cdb_intr(id)	(((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
 
 static inline bool ata_id_has_hipm(const u16 *id)
 {
@@ -482,75 +512,75 @@ static inline bool ata_id_has_dipm(const u16 *id)
 
 static inline int ata_id_has_fua(const u16 *id)
 {
-	if ((id[84] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CFSSE] & 0xC000) != 0x4000)
 		return 0;
-	return id[84] & (1 << 6);
+	return id[ATA_ID_CFSSE] & (1 << 6);
 }
 
 static inline int ata_id_has_flush(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[83] & (1 << 12);
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 12);
 }
 
 static inline int ata_id_has_flush_ext(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[83] & (1 << 13);
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 13);
 }
 
 static inline int ata_id_has_lba48(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	if (!ata_id_u64(id, 100))
+	if (!ata_id_u64(id, ATA_ID_LBA_CAPACITY_2))
 		return 0;
-	return id[83] & (1 << 10);
+	return id[ATA_ID_COMMAND_SET_2] & (1 << 10);
 }
 
 static inline int ata_id_hpa_enabled(const u16 *id)
 {
 	/* Yes children, word 83 valid bits cover word 82 data */
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
 	/* And 87 covers 85-87 */
-	if ((id[87] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
 		return 0;
 	/* Check command sets enabled as well as supported */
-	if ((id[85] & ( 1 << 10)) == 0)
+	if ((id[ATA_ID_CFS_ENABLE_1] & (1 << 10)) == 0)
 		return 0;
-	return id[82] & (1 << 10);
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 10);
 }
 
 static inline int ata_id_has_wcache(const u16 *id)
 {
 	/* Yes children, word 83 valid bits cover word 82 data */
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[82] & (1 << 5);
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 5);
 }
 
 static inline int ata_id_has_pm(const u16 *id)
 {
-	if ((id[83] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC000) != 0x4000)
 		return 0;
-	return id[82] & (1 << 3);
+	return id[ATA_ID_COMMAND_SET_1] & (1 << 3);
 }
 
 static inline int ata_id_rahead_enabled(const u16 *id)
 {
-	if ((id[87] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
 		return 0;
-	return id[85] & (1 << 6);
+	return id[ATA_ID_CFS_ENABLE_1] & (1 << 6);
 }
 
 static inline int ata_id_wcache_enabled(const u16 *id)
 {
-	if ((id[87] & 0xC000) != 0x4000)
+	if ((id[ATA_ID_CSF_DEFAULT] & 0xC000) != 0x4000)
 		return 0;
-	return id[85] & (1 << 5);
+	return id[ATA_ID_CFS_ENABLE_1] & (1 << 5);
 }
 
 /**
@@ -581,7 +611,7 @@ static inline unsigned int ata_id_major_version(const u16 *id)
 
 static inline int ata_id_is_sata(const u16 *id)
 {
-	return ata_id_major_version(id) >= 5 && id[93] == 0;
+	return ata_id_major_version(id) >= 5 && id[ATA_ID_HW_CONFIG] == 0;
 }
 
 static inline int ata_id_has_tpm(const u16 *id)
@@ -599,7 +629,7 @@ static inline int ata_id_has_dword_io(const u16 *id)
 	/* ATA 8 reuses this flag for "trusted" computing */
 	if (ata_id_major_version(id) > 7)
 		return 0;
-	if (id[48] & (1 << 0))
+	if (id[ATA_ID_DWORD_IO] & (1 << 0))
 		return 1;
 	return 0;
 }
@@ -608,22 +638,22 @@ static inline int ata_id_current_chs_valid(const u16 *id)
 {
 	/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
 	   has not been issued to the device then the values of
-	   id[54] to id[56] are vendor specific. */
-	return (id[53] & 0x01) && /* Current translation valid */
-		id[54] &&  /* cylinders in current translation */
-		id[55] &&  /* heads in current translation */
-		id[55] <= 16 &&
-		id[56];    /* sectors in current translation */
+	   id[ATA_ID_CUR_CYLS] to id[ATA_ID_CUR_SECTORS] are vendor specific. */
+	return (id[ATA_ID_FIELD_VALID] & 1) && /* Current translation valid */
+		id[ATA_ID_CUR_CYLS] &&  /* cylinders in current translation */
+		id[ATA_ID_CUR_HEADS] &&  /* heads in current translation */
+		id[ATA_ID_CUR_HEADS] <= 16 &&
+		id[ATA_ID_CUR_SECTORS];    /* sectors in current translation */
 }
 
 static inline int ata_id_is_cfa(const u16 *id)
 {
-	u16 v = id[0];
-	if (v == 0x848A)	/* Standard CF */
+	if (id[ATA_ID_CONFIG] == 0x848A)	/* Standard CF */
 		return 1;
 	/* Could be CF hiding as standard ATA */
-	if (ata_id_major_version(id) >= 3 &&  id[82] != 0xFFFF &&
-			(id[82] & ( 1 << 2)))
+	if (ata_id_major_version(id) >= 3 &&
+	    id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
+	   (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
 		return 1;
 	return 0;
 }
@@ -632,21 +662,21 @@ static inline int ata_drive_40wire(const u16 *dev_id)
 {
 	if (ata_id_is_sata(dev_id))
 		return 0;	/* SATA */
-	if ((dev_id[93] & 0xE000) == 0x6000)
+	if ((dev_id[ATA_ID_HW_CONFIG] & 0xE000) == 0x6000)
 		return 0;	/* 80 wire */
 	return 1;
 }
 
 static inline int ata_drive_40wire_relaxed(const u16 *dev_id)
 {
-	if ((dev_id[93] & 0x2000) == 0x2000)
+	if ((dev_id[ATA_ID_HW_CONFIG] & 0x2000) == 0x2000)
 		return 0;	/* 80 wire */
 	return 1;
 }
 
 static inline int atapi_cdb_len(const u16 *dev_id)
 {
-	u16 tmp = dev_id[0] & 0x3;
+	u16 tmp = dev_id[ATA_ID_CONFIG] & 0x3;
 	switch (tmp) {
 	case 0:		return 12;
 	case 1:		return 16;
@@ -656,7 +686,7 @@ static inline int atapi_cdb_len(const u16 *dev_id)
 
 static inline int atapi_command_packet_set(const u16 *dev_id)
 {
-	return (dev_id[0] >> 8) & 0x1f;
+	return (dev_id[ATA_ID_CONFIG] >> 8) & 0x1f;
 }
 
 static inline int atapi_id_dmadir(const u16 *dev_id)
-- 
GitLab


From 476d9894dde2da2c2b326d70b5bce5eccc593c8b Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Aug 2008 21:40:05 +0200
Subject: [PATCH 163/869] ata: add missing ATA_CMD_* defines

Add missing ATA_CMD_* defines to <linux/ata.h>.  Also add
ATA_EXABYTE_ENABLE_NEST, SETFEATURES_AAM_* and ATA_SMART_*
defines while at it.

Partially based on earlier work by Chris Wedgwood.

Acked-by: Chris Wedgwood <cw@f00f.org>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/linux/ata.h | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/include/linux/ata.h b/include/linux/ata.h
index 03fff6239b3..cf4ef6d915a 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -222,6 +222,13 @@ enum {
 	ATA_CMD_PMP_WRITE	= 0xE8,
 	ATA_CMD_CONF_OVERLAY	= 0xB1,
 	ATA_CMD_SEC_FREEZE_LOCK	= 0xF5,
+	ATA_CMD_SMART		= 0xB0,
+	ATA_CMD_MEDIA_LOCK	= 0xDE,
+	ATA_CMD_MEDIA_UNLOCK	= 0xDF,
+	/* marked obsolete in the ATA/ATAPI-7 spec */
+	ATA_CMD_RESTORE		= 0x10,
+	/* EXABYTE specific */
+	ATA_EXABYTE_ENABLE_NEST	= 0xF0,
 
 	/* READ_LOG_EXT pages */
 	ATA_LOG_SATA_NCQ	= 0x10,
@@ -262,6 +269,10 @@ enum {
 	SETFEATURES_WC_ON	= 0x02, /* Enable write cache */
 	SETFEATURES_WC_OFF	= 0x82, /* Disable write cache */
 
+	/* Enable/Disable Automatic Acoustic Management */
+	SETFEATURES_AAM_ON	= 0x42,
+	SETFEATURES_AAM_OFF	= 0xC2,
+
 	SETFEATURES_SPINUP	= 0x07, /* Spin-up drive */
 
 	SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
@@ -284,6 +295,15 @@ enum {
 	ATA_DCO_IDENTIFY	= 0xC2,
 	ATA_DCO_SET		= 0xC3,
 
+	/* feature values for SMART */
+	ATA_SMART_ENABLE	= 0xD8,
+	ATA_SMART_READ_VALUES	= 0xD0,
+	ATA_SMART_READ_THRESHOLDS = 0xD1,
+
+	/* password used in LBA Mid / LBA High for executing SMART commands */
+	ATA_SMART_LBAM_PASS	= 0x4F,
+	ATA_SMART_LBAH_PASS	= 0xC2,
+
 	/* ATAPI stuff */
 	ATAPI_PKT_DMA		= (1 << 0),
 	ATAPI_DMADIR		= (1 << 2),	/* ATAPI data dir:
-- 
GitLab


From b59116205c54c89df9cc80721b59e1e8d14488f1 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Aug 2008 21:40:05 +0200
Subject: [PATCH 164/869] ata: add missing ATA_* defines

Add missing ATA_* defines to <linux/ata.h>.  Also add
ATAPI_{LFS,EOM,ILI,IO,CODE} defines while at it.

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/linux/ata.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/include/linux/ata.h b/include/linux/ata.h
index cf4ef6d915a..1ce19c1ef0e 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -153,13 +153,26 @@ enum {
 	ATA_BUSY		= (1 << 7),	/* BSY status bit */
 	ATA_DRDY		= (1 << 6),	/* device ready */
 	ATA_DF			= (1 << 5),	/* device fault */
+	ATA_DSC			= (1 << 4),	/* drive seek complete */
 	ATA_DRQ			= (1 << 3),	/* data request i/o */
+	ATA_CORR		= (1 << 2),	/* corrected data error */
+	ATA_IDX			= (1 << 1),	/* index */
 	ATA_ERR			= (1 << 0),	/* have an error */
 	ATA_SRST		= (1 << 2),	/* software reset */
 	ATA_ICRC		= (1 << 7),	/* interface CRC error */
+	ATA_BBK			= ATA_ICRC,	/* pre-EIDE: block marked bad */
 	ATA_UNC			= (1 << 6),	/* uncorrectable media error */
+	ATA_MC			= (1 << 5),	/* media changed */
 	ATA_IDNF		= (1 << 4),	/* ID not found */
+	ATA_MCR			= (1 << 3),	/* media change requested */
 	ATA_ABORTED		= (1 << 2),	/* command aborted */
+	ATA_TRK0NF		= (1 << 1),	/* track 0 not found */
+	ATA_AMNF		= (1 << 0),	/* address mark not found */
+	ATAPI_LFS		= 0xF0,		/* last failed sense */
+	ATAPI_EOM		= ATA_TRK0NF,	/* end of media */
+	ATAPI_ILI		= ATA_AMNF,	/* illegal length indication */
+	ATAPI_IO		= (1 << 1),
+	ATAPI_COD		= (1 << 0),
 
 	/* ATA command block registers */
 	ATA_REG_DATA		= 0x00,
-- 
GitLab


From e0d94beead4ef652ec1c066be886140eebb06d8b Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 11 Aug 2008 17:47:40 +0200
Subject: [PATCH 165/869] PCI: acpi_pcihp: run _OSC on a root bridge

_OSC should be ran on a root bridge instead of the device itself.  Do
this before touching OSHP since PCI fw specs states that _OSC should be
preferred over OSHP (however if the device has OSHP but not _OSC -- not
a root bridge -- it's not).

Cc: kristen.c.accardi@intel.com
Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/hotplug/acpi_pcihp.c | 41 ++++++++++++++++++++++----------
 1 file changed, 29 insertions(+), 12 deletions(-)

diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index 93e37f0666a..bd831970f00 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -382,7 +382,7 @@ EXPORT_SYMBOL_GPL(acpi_get_hp_params_from_firmware);
 int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 {
 	acpi_status status;
-	acpi_handle chandle, handle = DEVICE_ACPI_HANDLE(&(dev->dev));
+	acpi_handle chandle, handle;
 	struct pci_dev *pdev = dev;
 	struct pci_bus *parent;
 	struct acpi_buffer string = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -399,10 +399,28 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 	 * Per PCI firmware specification, we should run the ACPI _OSC
 	 * method to get control of hotplug hardware before using it. If
 	 * an _OSC is missing, we look for an OSHP to do the same thing.
-	 * To handle different BIOS behavior, we look for _OSC and OSHP
-	 * within the scope of the hotplug controller and its parents,
+	 * To handle different BIOS behavior, we look for _OSC on a root
+	 * bridge preferentially (according to PCI fw spec). Later for
+	 * OSHP within the scope of the hotplug controller and its parents,
 	 * upto the host bridge under which this controller exists.
 	 */
+	while (pdev->bus->self)
+		pdev = pdev->bus->self;
+	handle = acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus),
+			pdev->bus->number);
+	if (handle) {
+		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
+		dbg("Trying to get hotplug control for %s\n",
+				(char *)string.pointer);
+		status = pci_osc_control_set(handle, flags);
+		if (ACPI_SUCCESS(status))
+			goto got_one;
+		kfree(string.pointer);
+		string = (struct acpi_buffer){ ACPI_ALLOCATE_BUFFER, NULL };
+	}
+
+	pdev = dev;
+	handle = DEVICE_ACPI_HANDLE(&dev->dev);
 	while (!handle) {
 		/*
 		 * This hotplug controller was not listed in the ACPI name
@@ -427,15 +445,9 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
 		dbg("Trying to get hotplug control for %s \n",
 		    (char *)string.pointer);
-		status = pci_osc_control_set(handle, flags);
-		if (status == AE_NOT_FOUND)
-			status = acpi_run_oshp(handle);
-		if (ACPI_SUCCESS(status)) {
-			dbg("Gained control for hotplug HW for pci %s (%s)\n",
-			    pci_name(dev), (char *)string.pointer);
-			kfree(string.pointer);
-			return 0;
-		}
+		status = acpi_run_oshp(handle);
+		if (ACPI_SUCCESS(status))
+			goto got_one;
 		if (acpi_root_bridge(handle))
 			break;
 		chandle = handle;
@@ -449,6 +461,11 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 
 	kfree(string.pointer);
 	return -ENODEV;
+got_one:
+	dbg("Gained control for hotplug HW for pci %s (%s)\n", pci_name(dev),
+			(char *)string.pointer);
+	kfree(string.pointer);
+	return 0;
 }
 EXPORT_SYMBOL(acpi_get_hp_hw_control_from_firmware);
 
-- 
GitLab


From 056c58e8eb4d6765214757e541b68095e2eb2bd2 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 18 Aug 2008 20:22:54 +0200
Subject: [PATCH 166/869] PCI: add acpi_find_root_bridge_handle

Consolidate finding of a root bridge and getting its handle to the one
inline function. It's cut & pasted on multiple places. Use this new
inline in those.

Cc: kristen.c.accardi@intel.com
Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/hotplug/acpi_pcihp.c   |  5 +----
 drivers/pci/pcie/aer/aerdrv_acpi.c |  7 +------
 include/linux/pci-acpi.h           | 11 +++++++++++
 3 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index bd831970f00..e17ef54f0ef 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -404,10 +404,7 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags)
 	 * OSHP within the scope of the hotplug controller and its parents,
 	 * upto the host bridge under which this controller exists.
 	 */
-	while (pdev->bus->self)
-		pdev = pdev->bus->self;
-	handle = acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus),
-			pdev->bus->number);
+	handle = acpi_find_root_bridge_handle(pdev);
 	if (handle) {
 		acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
 		dbg("Trying to get hotplug control for %s\n",
diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c
index 30f581b8791..6dd7b13e980 100644
--- a/drivers/pci/pcie/aer/aerdrv_acpi.c
+++ b/drivers/pci/pcie/aer/aerdrv_acpi.c
@@ -36,12 +36,7 @@ int aer_osc_setup(struct pcie_device *pciedev)
 	if (acpi_pci_disabled)
 		return -1;
 
-	/* Find root host bridge */
-	while (pdev->bus->self)
-		pdev = pdev->bus->self;
-	handle = acpi_get_pci_rootbridge_handle(
-		pci_domain_nr(pdev->bus), pdev->bus->number);
-
+	handle = acpi_find_root_bridge_handle(pdev);
 	if (handle) {
 		pcie_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
 		status = pci_osc_control_set(handle,
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 3ba25065fa9..8837928fbf3 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -57,6 +57,15 @@ static inline acpi_status pcie_osc_support_set(u32 flags)
 {
 	return __pci_osc_support_set(flags, PCI_EXPRESS_ROOT_HID_STRING);
 }
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{
+	/* Find root host bridge */
+	while (pdev->bus->self)
+		pdev = pdev->bus->self;
+
+	return acpi_get_pci_rootbridge_handle(pci_domain_nr(pdev->bus),
+			pdev->bus->number);
+}
 #else
 #if !defined(AE_ERROR)
 typedef u32 		acpi_status;
@@ -66,6 +75,8 @@ static inline acpi_status pci_osc_control_set(acpi_handle handle, u32 flags)
 {return AE_ERROR;}
 static inline acpi_status pci_osc_support_set(u32 flags) {return AE_ERROR;} 
 static inline acpi_status pcie_osc_support_set(u32 flags) {return AE_ERROR;}
+static inline acpi_handle acpi_find_root_bridge_handle(struct pci_dev *pdev)
+{ return NULL; }
 #endif
 
 #endif	/* _PCI_ACPI_H_ */
-- 
GitLab


From ea42b8ce8cc9f4a3d3048fae5ba8ad7269d17afa Mon Sep 17 00:00:00 2001
From: Robin Holt <holt@sgi.com>
Date: Fri, 15 Aug 2008 04:56:01 -0500
Subject: [PATCH 167/869] [IA64] Remove sn2_defconfig.

Not really a patch as much as a remove this file request.  Now that
generic_defconfig supports all the configurations SGI currently supports
and has NR_CPUS and NR_NODES at our largest configurations, we have no
reason to maintain the extra defconfig file.

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/configs/sn2_defconfig | 1285 -------------------------------
 1 file changed, 1285 deletions(-)
 delete mode 100644 arch/ia64/configs/sn2_defconfig

diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
deleted file mode 100644
index 7f6b2377d13..00000000000
--- a/arch/ia64/configs/sn2_defconfig
+++ /dev/null
@@ -1,1285 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Thu Oct 18 16:03:40 2007
-#
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_TASKSTATS=y
-# CONFIG_TASK_DELAY_ACCT is not set
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=20
-CONFIG_CGROUPS=y
-CONFIG_CPUSETS=y
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLOCK_COMPAT=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor type and features
-#
-CONFIG_IA64=y
-CONFIG_64BIT=y
-CONFIG_QUICKLIST=y
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_DMI=y
-CONFIG_EFI=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_IA64_UNCACHED_ALLOCATOR=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_IA64_GENERIC is not set
-# CONFIG_IA64_DIG is not set
-# CONFIG_IA64_HP_ZX1 is not set
-# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
-CONFIG_IA64_SGI_SN2=y
-# CONFIG_IA64_HP_SIM is not set
-# CONFIG_ITANIUM is not set
-CONFIG_MCKINLEY=y
-# CONFIG_IA64_PAGE_SIZE_4KB is not set
-# CONFIG_IA64_PAGE_SIZE_8KB is not set
-# CONFIG_IA64_PAGE_SIZE_16KB is not set
-CONFIG_IA64_PAGE_SIZE_64KB=y
-CONFIG_PGTABLE_3=y
-# CONFIG_PGTABLE_4 is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_IA64_L1_CACHE_SHIFT=7
-# CONFIG_IA64_CYCLONE is not set
-CONFIG_IOSAPIC=y
-CONFIG_IA64_SGI_SN_XP=m
-CONFIG_FORCE_MAX_ZONEORDER=17
-CONFIG_SMP=y
-CONFIG_NR_CPUS=1024
-# CONFIG_HOTPLUG_CPU is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_SCHED_SMT=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_BKL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM_MANUAL=y
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_DISCONTIGMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_NEED_MULTIPLE_NODES=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_NR_QUICK=1
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
-CONFIG_NUMA=y
-CONFIG_NODES_SHIFT=10
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_VIRTUAL_MEM_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
-CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
-CONFIG_IA32_SUPPORT=y
-CONFIG_COMPAT=y
-CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
-CONFIG_IA64_MCA_RECOVERY=y
-CONFIG_PERFMON=y
-CONFIG_IA64_PALINFO=y
-CONFIG_IA64_MC_ERR_INJECT=y
-CONFIG_SGI_SN=y
-# CONFIG_IA64_ESI is not set
-# CONFIG_IA64_HP_AML_NFW is not set
-
-#
-# SN Devices
-#
-CONFIG_SGI_IOC3=y
-
-#
-# Firmware Drivers
-#
-CONFIG_EFI_VARS=y
-CONFIG_EFI_PCDP=y
-CONFIG_DMIID=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management and ACPI
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_ACPI=y
-# CONFIG_ACPI_PROCFS is not set
-CONFIG_ACPI_PROC_EVENT=y
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_FAN is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_PROCESSOR is not set
-CONFIG_ACPI_NUMA=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
-# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_EC=y
-CONFIG_ACPI_POWER=y
-CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Bus options (PCI, PCMCIA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_PCIEAER=y
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_FAKE is not set
-# CONFIG_HOTPLUG_PCI_ACPI is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_PCI_SGI=y
-# CONFIG_PCCARD is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=y
-CONFIG_INET_DIAG=m
-CONFIG_INET_TCP_DIAG=m
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-CONFIG_PNPACPI=y
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-CONFIG_SGI_IOC4=y
-# CONFIG_TIFM_CORE is not set
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-CONFIG_BLK_DEV_SGIIOC4=y
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_LIBSAS=y
-# CONFIG_SCSI_SAS_ATA is not set
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-CONFIG_SCSI_SRP_ATTRS=y
-CONFIG_SCSI_LOWLEVEL=y
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_1280=y
-CONFIG_SCSI_QLA_FC=y
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-CONFIG_ATA=y
-CONFIG_ATA_NONSTANDARD=y
-CONFIG_ATA_ACPI=y
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-CONFIG_SATA_VITESSE=y
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ACPI is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
-CONFIG_MD_MULTIPATH=y
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_DELAY is not set
-CONFIG_FUSION=y
-CONFIG_FUSION_SPI=y
-CONFIG_FUSION_FC=y
-CONFIG_FUSION_SAS=y
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LOGGING=y
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_IP1000 is not set
-# CONFIG_ARCNET is not set
-# CONFIG_NET_ETHERNET is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-CONFIG_NETDEV_10000=y
-CONFIG_CHELSIO_T1=m
-CONFIG_CHELSIO_T1_1G=y
-# CONFIG_CHELSIO_T1_NAPI is not set
-CONFIG_CHELSIO_T3=m
-CONFIG_IXGBE=m
-# CONFIG_IXGB is not set
-CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_UNICODE is not set
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_SERIAL_NONSTANDARD=y
-# CONFIG_COMPUTONE is not set
-# CONFIG_ROCKETPORT is not set
-# CONFIG_CYCLADES is not set
-# CONFIG_DIGIEPCA is not set
-# CONFIG_MOXA_INTELLIO is not set
-# CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINKMP is not set
-# CONFIG_SYNCLINK_GT is not set
-# CONFIG_N_HDLC is not set
-# CONFIG_SPECIALIX is not set
-# CONFIG_SX is not set
-# CONFIG_RIO is not set
-# CONFIG_STALDRV is not set
-CONFIG_SGI_SNSC=y
-CONFIG_SGI_TIOCX=y
-CONFIG_SGI_MBCS=m
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_SGI_L1_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_SGI_IOC4=y
-CONFIG_SERIAL_SGI_IOC3=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_EFI_RTC=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-CONFIG_RAW_DRIVER=m
-CONFIG_MAX_RAW_DEVS=256
-# CONFIG_HPET is not set
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_MMTIMER=y
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-CONFIG_AGP=y
-CONFIG_AGP_SGI_TIOCA=y
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_INFINIBAND=m
-# CONFIG_INFINIBAND_USER_MAD is not set
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_USER_MEM=y
-CONFIG_INFINIBAND_ADDR_TRANS=y
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_MTHCA_DEBUG=y
-# CONFIG_INFINIBAND_AMSO1100 is not set
-# CONFIG_INFINIBAND_CXGB3 is not set
-# CONFIG_MLX4_INFINIBAND is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_CM is not set
-CONFIG_INFINIBAND_IPOIB_DEBUG=y
-# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
-CONFIG_INFINIBAND_SRP=m
-# CONFIG_INFINIBAND_ISER is not set
-# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-CONFIG_MSPEC=y
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=y
-CONFIG_XFS_QUOTA=y
-# CONFIG_XFS_SECURITY is not set
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_XFS_RT=y
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-CONFIG_PRINT_QUOTA_WARNING=y
-# CONFIG_QFMT_V1 is not set
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=m
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-# CONFIG_MSDOS_FS is not set
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
-CONFIG_CIFS=m
-# CONFIG_CIFS_STATS is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-CONFIG_SGI_PARTITION=y
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_IRQ_PER_CPU=y
-
-#
-# Instrumentation Support
-#
-# CONFIG_PROFILING is not set
-# CONFIG_KPROBES is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_IA64_GRANULE_16MB=y
-# CONFIG_IA64_GRANULE_64MB is not set
-# CONFIG_IA64_PRINT_HAZARDS is not set
-# CONFIG_DISABLE_VHPT is not set
-# CONFIG_IA64_DEBUG_CMPXCHG is not set
-# CONFIG_IA64_DEBUG_IRQ is not set
-CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=y
-CONFIG_ASYNC_CORE=y
-CONFIG_ASYNC_MEMCPY=y
-CONFIG_ASYNC_XOR=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-- 
GitLab


From 97653f92c004d322ef27edb168a1b5f31142c6dc Mon Sep 17 00:00:00 2001
From: Robin Holt <holt@sgi.com>
Date: Fri, 15 Aug 2008 09:21:24 -0500
Subject: [PATCH 168/869] [IA64] Shrink shadow_flush_counts to a short array to
 save 8k of per_cpu area.

Making allmodconfig will break the current build.  This patch shrinks
the per_cpu__shadow_flush_counts from 16k to 8k which frees enough space
to allow allmodconfig to successfully complete.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11338

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/smp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 3676468612b..da8f020d82c 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -58,7 +58,7 @@ static struct local_tlb_flush_counts {
 	unsigned int count;
 } __attribute__((__aligned__(32))) local_tlb_flush_counts[NR_CPUS];
 
-static DEFINE_PER_CPU(unsigned int, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
+static DEFINE_PER_CPU(unsigned short, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
 
 #define IPI_CALL_FUNC		0
 #define IPI_CPU_STOP		1
@@ -254,7 +254,7 @@ smp_local_flush_tlb(void)
 void
 smp_flush_tlb_cpumask(cpumask_t xcpumask)
 {
-	unsigned int *counts = __ia64_per_cpu_var(shadow_flush_counts);
+	unsigned short *counts = __ia64_per_cpu_var(shadow_flush_counts);
 	cpumask_t cpumask = xcpumask;
 	int mycpu, cpu, flush_mycpu = 0;
 
@@ -262,7 +262,7 @@ smp_flush_tlb_cpumask(cpumask_t xcpumask)
 	mycpu = smp_processor_id();
 
 	for_each_cpu_mask(cpu, cpumask)
-		counts[cpu] = local_tlb_flush_counts[cpu].count;
+		counts[cpu] = local_tlb_flush_counts[cpu].count & 0xffff;
 
 	mb();
 	for_each_cpu_mask(cpu, cpumask) {
@@ -276,7 +276,7 @@ smp_flush_tlb_cpumask(cpumask_t xcpumask)
 		smp_local_flush_tlb();
 
 	for_each_cpu_mask(cpu, cpumask)
-		while(counts[cpu] == local_tlb_flush_counts[cpu].count)
+		while(counts[cpu] == (local_tlb_flush_counts[cpu].count & 0xffff))
 			udelay(FLUSH_DELAY);
 
 	preempt_enable();
-- 
GitLab


From 8a20fd52c663b1796e1f01c0fa21d9b24c2936b6 Mon Sep 17 00:00:00 2001
From: "Luck, Tony" <tony.luck@intel.com>
Date: Fri, 15 Aug 2008 15:37:48 -0700
Subject: [PATCH 169/869] [IA64] pci_acpi_scan_root cleanup

The code walks all the acpi _CRS methods to see how many windows
to allocate.  It then scans them all again to insert_resource()
for each *even if the first scan found that there were none*.

Move the second scan inside the "if (windows)" clause.

Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/pci/pci.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 77b15f80f10..7545037a862 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -324,7 +324,6 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl)
 struct pci_bus * __devinit
 pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 {
-	struct pci_root_info info;
 	struct pci_controller *controller;
 	unsigned int windows = 0;
 	struct pci_bus *pbus;
@@ -346,22 +345,24 @@ pci_acpi_scan_root(struct acpi_device *device, int domain, int bus)
 	acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_window,
 			&windows);
 	if (windows) {
+		struct pci_root_info info;
+
 		controller->window =
 			kmalloc_node(sizeof(*controller->window) * windows,
 				     GFP_KERNEL, controller->node);
 		if (!controller->window)
 			goto out2;
-	}
 
-	name = kmalloc(16, GFP_KERNEL);
-	if (!name)
-		goto out3;
+		name = kmalloc(16, GFP_KERNEL);
+		if (!name)
+			goto out3;
 
-	sprintf(name, "PCI Bus %04x:%02x", domain, bus);
-	info.controller = controller;
-	info.name = name;
-	acpi_walk_resources(device->handle, METHOD_NAME__CRS, add_window,
-			&info);
+		sprintf(name, "PCI Bus %04x:%02x", domain, bus);
+		info.controller = controller;
+		info.name = name;
+		acpi_walk_resources(device->handle, METHOD_NAME__CRS,
+			add_window, &info);
+	}
 	/*
 	 * See arch/x86/pci/acpi.c.
 	 * The desired pci bus might already be scanned in a quirk. We
-- 
GitLab


From 37c23e7fda6913d133ac12012395e58af1fe24c6 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Sat, 16 Aug 2008 19:50:28 +0200
Subject: [PATCH 170/869] [IA64] use generic compat_old_sys_readdir

Switch ia64 to the generic compat_sys_old_readdir which is identical
except for slightly better error handling.  Also remove sys32_getdents
which already isn't wired up to the syscall table anymore in favour of
compat_sys_getdents.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/ia32/ia32_entry.S |   2 +-
 arch/ia64/ia32/ia32priv.h   |   7 --
 arch/ia64/ia32/sys_ia32.c   | 132 ------------------------------------
 3 files changed, 1 insertion(+), 140 deletions(-)

diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S
index 06efd1f9b80..ff88c48c5d1 100644
--- a/arch/ia64/ia32/ia32_entry.S
+++ b/arch/ia64/ia32/ia32_entry.S
@@ -262,7 +262,7 @@ ia32_syscall_table:
 	data8 sys_uselib
 	data8 sys_swapon
 	data8 sys_reboot
-	data8 sys32_readdir
+	data8 compat_sys_old_readdir
 	data8 sys32_mmap	  /* 90 */
 	data8 sys32_munmap
 	data8 sys_truncate
diff --git a/arch/ia64/ia32/ia32priv.h b/arch/ia64/ia32/ia32priv.h
index c5c872b250d..dd0c53687a9 100644
--- a/arch/ia64/ia32/ia32priv.h
+++ b/arch/ia64/ia32/ia32priv.h
@@ -276,13 +276,6 @@ typedef struct compat_siginfo {
 	} _sifields;
 } compat_siginfo_t;
 
-struct old_linux32_dirent {
-	u32	d_ino;
-	u32	d_offset;
-	u16	d_namlen;
-	char	d_name[1];
-};
-
 /*
  * IA-32 ELF specific definitions for IA-64.
  */
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 465116aecb8..bf196cbb379 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1210,138 +1210,6 @@ sys32_settimeofday (struct compat_timeval __user *tv, struct timezone __user *tz
 	return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
 }
 
-struct getdents32_callback {
-	struct compat_dirent __user *current_dir;
-	struct compat_dirent __user *previous;
-	int count;
-	int error;
-};
-
-struct readdir32_callback {
-	struct old_linux32_dirent __user * dirent;
-	int count;
-};
-
-static int
-filldir32 (void *__buf, const char *name, int namlen, loff_t offset, u64 ino,
-	   unsigned int d_type)
-{
-	struct compat_dirent __user * dirent;
-	struct getdents32_callback * buf = (struct getdents32_callback *) __buf;
-	int reclen = ROUND_UP(offsetof(struct compat_dirent, d_name) + namlen + 1, 4);
-	u32 d_ino;
-
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->error = -EFAULT;	/* only used if we fail.. */
-	dirent = buf->previous;
-	if (dirent)
-		if (put_user(offset, &dirent->d_off))
-			return -EFAULT;
-	dirent = buf->current_dir;
-	buf->previous = dirent;
-	if (put_user(d_ino, &dirent->d_ino)
-	    || put_user(reclen, &dirent->d_reclen)
-	    || copy_to_user(dirent->d_name, name, namlen)
-	    || put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
-	dirent = (struct compat_dirent __user *) ((char __user *) dirent + reclen);
-	buf->current_dir = dirent;
-	buf->count -= reclen;
-	return 0;
-}
-
-asmlinkage long
-sys32_getdents (unsigned int fd, struct compat_dirent __user *dirent, unsigned int count)
-{
-	struct file * file;
-	struct compat_dirent __user * lastdirent;
-	struct getdents32_callback buf;
-	int error;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, count))
-		goto out;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.current_dir = dirent;
-	buf.previous = NULL;
-	buf.count = count;
-	buf.error = 0;
-
-	error = vfs_readdir(file, filldir32, &buf);
-	if (error < 0)
-		goto out_putf;
-	error = buf.error;
-	lastdirent = buf.previous;
-	if (lastdirent) {
-		if (put_user(file->f_pos, &lastdirent->d_off))
-			error = -EFAULT;
-		else
-			error = count - buf.count;
-	}
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-static int
-fillonedir32 (void * __buf, const char * name, int namlen, loff_t offset, u64 ino,
-	      unsigned int d_type)
-{
-	struct readdir32_callback * buf = (struct readdir32_callback *) __buf;
-	struct old_linux32_dirent __user * dirent;
-	u32 d_ino;
-
-	if (buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	buf->count++;
-	dirent = buf->dirent;
-	if (put_user(d_ino, &dirent->d_ino)
-	    || put_user(offset, &dirent->d_offset)
-	    || put_user(namlen, &dirent->d_namlen)
-	    || copy_to_user(dirent->d_name, name, namlen)
-	    || put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
-	return 0;
-}
-
-asmlinkage long
-sys32_readdir (unsigned int fd, void __user *dirent, unsigned int count)
-{
-	int error;
-	struct file * file;
-	struct readdir32_callback buf;
-
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.count = 0;
-	buf.dirent = dirent;
-
-	error = vfs_readdir(file, fillonedir32, &buf);
-	if (error >= 0)
-		error = buf.count;
-	fput(file);
-out:
-	return error;
-}
-
 struct sel_arg_struct {
 	unsigned int n;
 	unsigned int inp;
-- 
GitLab


From 8a7c5ef3ba8cca8f9c4f91ddef3d081f517914ae Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Tue, 19 Aug 2008 02:13:55 +0200
Subject: [PATCH 171/869] x86 iommu: remove unneeded parenthesis

The parenthesis in __iommu_queue_command() are not needed when assigning
into 'target' variable.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/amd_iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index de39e1f2ede..69b4d060b21 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -65,7 +65,7 @@ static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 	u8 *target;
 
 	tail = readl(iommu->mmio_base + MMIO_CMD_TAIL_OFFSET);
-	target = (iommu->cmd_buf + tail);
+	target = iommu->cmd_buf + tail;
 	memcpy_toio(target, cmd, sizeof(*cmd));
 	tail = (tail + sizeof(*cmd)) % iommu->cmd_buf_size;
 	head = readl(iommu->mmio_base + MMIO_CMD_HEAD_OFFSET);
-- 
GitLab


From 8608db031b4d2932d645709e2cfe8fbcd91a7305 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 18 Aug 2008 20:51:18 -0700
Subject: [PATCH 172/869] pkt_sched: Never schedule non-root qdiscs.

Based upon initial discovery and patch by Jarek Poplawski.

The qdisc watchdogs can be attached to any qdisc, not just the root,
so make sure we schedule the correct one.

CBQ has a similar bug.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_api.c | 2 +-
 net/sched/sch_cbq.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index c8dc72e1210..98c00847a3d 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -426,7 +426,7 @@ static enum hrtimer_restart qdisc_watchdog(struct hrtimer *timer)
 
 	wd->qdisc->flags &= ~TCQ_F_THROTTLED;
 	smp_wmb();
-	__netif_schedule(wd->qdisc);
+	__netif_schedule(qdisc_root(wd->qdisc));
 
 	return HRTIMER_NORESTART;
 }
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 4e261ce62f4..47ef492c4ff 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -654,7 +654,7 @@ static enum hrtimer_restart cbq_undelay(struct hrtimer *timer)
 	}
 
 	sch->flags &= ~TCQ_F_THROTTLED;
-	__netif_schedule(sch);
+	__netif_schedule(qdisc_root(sch));
 	return HRTIMER_NORESTART;
 }
 
-- 
GitLab


From 25bfcd5a78a377ea4c54a3c21e44590e2fc478a6 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Mon, 18 Aug 2008 20:53:34 -0700
Subject: [PATCH 173/869] pkt_sched: Add lockdep annotation for qdisc locks

Qdisc locks are initialized in the same function, qdisc_alloc(), so
lockdep can't distinguish tx qdisc lock from rx and reports "possible
recursive locking detected" when both these locks are taken eg. while
using act_mirred with ifb. This looks like a false positive. Anyway,
after this patch these locks will be reported more exactly.

Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_api.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 98c00847a3d..7d7070b1eeb 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -27,6 +27,7 @@
 #include <linux/kmod.h>
 #include <linux/list.h>
 #include <linux/hrtimer.h>
+#include <linux/lockdep.h>
 
 #include <net/net_namespace.h>
 #include <net/sock.h>
@@ -707,6 +708,10 @@ static int qdisc_graft(struct net_device *dev, struct Qdisc *parent,
 	return err;
 }
 
+/* lockdep annotation is needed for ingress; egress gets it only for name */
+static struct lock_class_key qdisc_tx_lock;
+static struct lock_class_key qdisc_rx_lock;
+
 /*
    Allocate and initialize new qdisc.
 
@@ -767,6 +772,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 	if (handle == TC_H_INGRESS) {
 		sch->flags |= TCQ_F_INGRESS;
 		handle = TC_H_MAKE(TC_H_INGRESS, 0);
+		lockdep_set_class(qdisc_lock(sch), &qdisc_rx_lock);
 	} else {
 		if (handle == 0) {
 			handle = qdisc_alloc_handle(dev);
@@ -774,6 +780,7 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 			if (handle == 0)
 				goto err_out3;
 		}
+		lockdep_set_class(qdisc_lock(sch), &qdisc_tx_lock);
 	}
 
 	sch->handle = handle;
-- 
GitLab


From 4d8863a29c4755a0461cd31b6865026187d6c43a Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 18 Aug 2008 21:03:15 -0700
Subject: [PATCH 174/869] pkt_sched: Don't hold qdisc lock over
 qdisc_destroy().

Based upon reports by Denys Fedoryshchenko, and feedback
and help from Jarek Poplawski and Herbert Xu.

We always either:

1) Never made an external reference to this qdisc.

or

2) Did a dev_deactivate() which purged all asynchronous
   references.

So do not lock the qdisc when we call qdisc_destroy(),
it's illegal anyways as when we drop the lock this is
free'd memory.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_api.c     | 13 ++-----------
 net/sched/sch_generic.c |  6 ------
 2 files changed, 2 insertions(+), 17 deletions(-)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 7d7070b1eeb..d91a2338877 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -638,11 +638,8 @@ static void notify_and_destroy(struct sk_buff *skb, struct nlmsghdr *n, u32 clid
 	if (new || old)
 		qdisc_notify(skb, n, clid, old, new);
 
-	if (old) {
-		sch_tree_lock(old);
+	if (old)
 		qdisc_destroy(old);
-		sch_tree_unlock(old);
-	}
 }
 
 /* Graft qdisc "new" to class "classid" of qdisc "parent" or
@@ -1092,16 +1089,10 @@ create_n_graft:
 
 graft:
 	if (1) {
-		spinlock_t *root_lock;
-
 		err = qdisc_graft(dev, p, skb, n, clid, q, NULL);
 		if (err) {
-			if (q) {
-				root_lock = qdisc_root_lock(q);
-				spin_lock_bh(root_lock);
+			if (q)
 				qdisc_destroy(q);
-				spin_unlock_bh(root_lock);
-			}
 			return err;
 		}
 	}
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 6f96b7bc080..c3ed4d44fc1 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -518,8 +518,6 @@ void qdisc_reset(struct Qdisc *qdisc)
 }
 EXPORT_SYMBOL(qdisc_reset);
 
-/* Under qdisc_lock(qdisc) and BH! */
-
 void qdisc_destroy(struct Qdisc *qdisc)
 {
 	const struct Qdisc_ops  *ops = qdisc->ops;
@@ -712,14 +710,10 @@ static void shutdown_scheduler_queue(struct net_device *dev,
 	struct Qdisc *qdisc_default = _qdisc_default;
 
 	if (qdisc) {
-		spinlock_t *root_lock = qdisc_lock(qdisc);
-
 		dev_queue->qdisc = qdisc_default;
 		dev_queue->qdisc_sleeping = qdisc_default;
 
-		spin_lock_bh(root_lock);
 		qdisc_destroy(qdisc);
-		spin_unlock_bh(root_lock);
 	}
 }
 
-- 
GitLab


From d28934ad8a4e87203a95de9c376611de8bc2f013 Mon Sep 17 00:00:00 2001
From: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Date: Mon, 18 Aug 2008 21:14:20 -0700
Subject: [PATCH 175/869] dccp: Fix panic caused by too early termination of
 retransmission mechanism

Thanks is due to Wei Yongjun for the detailed analysis and description of this
bug at http://marc.info/?l=dccp&m=121739364909199&w=2

The problem is that invalid packets received by a client in state REQUEST cause
the retransmission timer for the DCCP-Request to be reset. This includes freeing
the Request-skb ( in dccp_rcv_request_sent_state_process() ). As a consequence,
 * the arrival of further packets cause a double-free, triggering a panic(),
 * the connection then may hang, since further retransmissions are blocked.

This patch changes the order of statements so that the retransmission timer is
reset, and the pending Request freed, only if a valid Response has arrived (or
the number of sysctl-retries has been exhausted).

Further changes:
----------------
To be on the safe side, replaced __kfree_skb with kfree_skb so that if due to
unexpected circumstances the sk_send_head is NULL the WARN_ON is used instead.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/dccp/input.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/net/dccp/input.c b/net/dccp/input.c
index df2f110df94..803933ab396 100644
--- a/net/dccp/input.c
+++ b/net/dccp/input.c
@@ -411,12 +411,6 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk,
 		struct dccp_sock *dp = dccp_sk(sk);
 		long tstamp = dccp_timestamp();
 
-		/* Stop the REQUEST timer */
-		inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS);
-		WARN_ON(sk->sk_send_head == NULL);
-		__kfree_skb(sk->sk_send_head);
-		sk->sk_send_head = NULL;
-
 		if (!between48(DCCP_SKB_CB(skb)->dccpd_ack_seq,
 			       dp->dccps_awl, dp->dccps_awh)) {
 			dccp_pr_debug("invalid ackno: S.AWL=%llu, "
@@ -441,6 +435,12 @@ static int dccp_rcv_request_sent_state_process(struct sock *sk,
 				    DCCP_ACKVEC_STATE_RECEIVED))
 			goto out_invalid_packet; /* FIXME: change error code */
 
+		/* Stop the REQUEST timer */
+		inet_csk_clear_xmit_timer(sk, ICSK_TIME_RETRANS);
+		WARN_ON(sk->sk_send_head == NULL);
+		kfree_skb(sk->sk_send_head);
+		sk->sk_send_head = NULL;
+
 		dp->dccps_isr = DCCP_SKB_CB(skb)->dccpd_seq;
 		dccp_update_gsr(sk, dp->dccps_isr);
 		/*
-- 
GitLab


From 46faec9858e8943226464dac50e205bf210d9174 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Anders=20Grafstr=C3=B6m?= <grfstrm@users.sourceforge.net>
Date: Mon, 18 Aug 2008 21:29:57 -0700
Subject: [PATCH 176/869] netfilter: ipt_addrtype: Fix matching of inverted
 destination address type
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This patch fixes matching of inverted destination address type.

Signed-off-by: Anders Grafström <grfstrm@users.sourceforge.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/netfilter/ipt_addrtype.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/netfilter/ipt_addrtype.c b/net/ipv4/netfilter/ipt_addrtype.c
index 49587a49722..462a22c9787 100644
--- a/net/ipv4/netfilter/ipt_addrtype.c
+++ b/net/ipv4/netfilter/ipt_addrtype.c
@@ -70,7 +70,7 @@ addrtype_mt_v1(const struct sk_buff *skb, const struct net_device *in,
 		       (info->flags & IPT_ADDRTYPE_INVERT_SOURCE);
 	if (ret && info->dest)
 		ret &= match_type(dev, iph->daddr, info->dest) ^
-		       (info->flags & IPT_ADDRTYPE_INVERT_DEST);
+		       !!(info->flags & IPT_ADDRTYPE_INVERT_DEST);
 	return ret;
 }
 
-- 
GitLab


From 1575e7ea018fec992b94a12a1a491ce693ae9eac Mon Sep 17 00:00:00 2001
From: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Mon, 18 Aug 2008 21:30:55 -0700
Subject: [PATCH 177/869] netfilter: ctnetlink: fix double helper assignation
 for NAT'ed conntracks

If we create a conntrack that has NAT handlings and a helper, the helper
is assigned twice. This happens because nf_nat_setup_info() - via
nf_conntrack_alter_reply() - sets the helper before ctnetlink, which
indeed does not check if the conntrack already has a helper as it thinks that
it is a brand new conntrack.

The fix moves the helper assignation before the set of the status flags.
This avoids a bogus assertion in __nf_ct_ext_add (if netfilter assertions are
enabled) which checks that the conntrack must not be confirmed.

This problem was introduced in 2.6.23 with the netfilter extension
infrastructure.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
---
 net/netfilter/nf_conntrack_netlink.c | 34 ++++++++++++++++------------
 1 file changed, 19 insertions(+), 15 deletions(-)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 105a616c5c7..d1fb2f8555e 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1136,16 +1136,33 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 	ct->timeout.expires = jiffies + ct->timeout.expires * HZ;
 	ct->status |= IPS_CONFIRMED;
 
+	rcu_read_lock();
+	helper = __nf_ct_helper_find(rtuple);
+	if (helper) {
+		help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
+		if (help == NULL) {
+			rcu_read_unlock();
+			err = -ENOMEM;
+			goto err;
+		}
+		/* not in hash table yet so not strictly necessary */
+		rcu_assign_pointer(help->helper, helper);
+	}
+
 	if (cda[CTA_STATUS]) {
 		err = ctnetlink_change_status(ct, cda);
-		if (err < 0)
+		if (err < 0) {
+			rcu_read_unlock();
 			goto err;
+		}
 	}
 
 	if (cda[CTA_PROTOINFO]) {
 		err = ctnetlink_change_protoinfo(ct, cda);
-		if (err < 0)
+		if (err < 0) {
+			rcu_read_unlock();
 			goto err;
+		}
 	}
 
 	nf_ct_acct_ext_add(ct, GFP_KERNEL);
@@ -1155,19 +1172,6 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 		ct->mark = ntohl(nla_get_be32(cda[CTA_MARK]));
 #endif
 
-	rcu_read_lock();
-	helper = __nf_ct_helper_find(rtuple);
-	if (helper) {
-		help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
-		if (help == NULL) {
-			rcu_read_unlock();
-			err = -ENOMEM;
-			goto err;
-		}
-		/* not in hash table yet so not strictly necessary */
-		rcu_assign_pointer(help->helper, helper);
-	}
-
 	/* setup master conntrack: this is a confirmed expectation */
 	if (master_ct) {
 		__set_bit(IPS_EXPECTED_BIT, &ct->status);
-- 
GitLab


From cb1cb5c47457ff2b604dac2da44cab4d39d11459 Mon Sep 17 00:00:00 2001
From: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Mon, 18 Aug 2008 21:31:24 -0700
Subject: [PATCH 178/869] netfilter: ctnetlink: fix sleep in read-side lock
 section

Fix allocation with GFP_KERNEL in ctnetlink_create_conntrack() under
read-side lock sections.

This problem was introduced in 2.6.25.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/nf_conntrack_netlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index d1fb2f8555e..a5b95ccb3ce 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1139,7 +1139,7 @@ ctnetlink_create_conntrack(struct nlattr *cda[],
 	rcu_read_lock();
 	helper = __nf_ct_helper_find(rtuple);
 	if (helper) {
-		help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
+		help = nf_ct_helper_ext_add(ct, GFP_ATOMIC);
 		if (help == NULL) {
 			rcu_read_unlock();
 			err = -ENOMEM;
-- 
GitLab


From fab00c5d15091546be681426c60b2ed2c10513bf Mon Sep 17 00:00:00 2001
From: Pablo Neira Ayuso <pablo@netfilter.org>
Date: Mon, 18 Aug 2008 21:31:46 -0700
Subject: [PATCH 179/869] netfilter: ctnetlink: sleepable allocation with spin
 lock bh

This patch removes a GFP_KERNEL allocation while holding a spin lock with
bottom halves disabled in ctnetlink_change_helper().

This problem was introduced in 2.6.23 with the netfilter extension
infrastructure.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/nf_conntrack_netlink.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index a5b95ccb3ce..a8752031adc 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -968,7 +968,7 @@ ctnetlink_change_helper(struct nf_conn *ct, struct nlattr *cda[])
 		/* need to zero data of old helper */
 		memset(&help->help, 0, sizeof(help->help));
 	} else {
-		help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
+		help = nf_ct_helper_ext_add(ct, GFP_ATOMIC);
 		if (help == NULL)
 			return -ENOMEM;
 	}
-- 
GitLab


From 9f593653742d1dd816c4e94c6e5154a57ccba6d1 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Mon, 18 Aug 2008 21:32:32 -0700
Subject: [PATCH 180/869] nf_nat: use secure_ipv4_port_ephemeral() for NAT port
 randomization

Use incoming network tuple as seed for NAT port randomization.
This avoids concerns of leaking net_random() bits, and also gives better
port distribution. Don't have NAT server, compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>

[ added missing EXPORT_SYMBOL_GPL ]

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/char/random.c                    | 1 +
 net/ipv4/netfilter/nf_nat_proto_common.c | 8 ++++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index e0d0e371909..1838aa3d24f 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1571,6 +1571,7 @@ u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport)
 
 	return half_md4_transform(hash, keyptr->secret);
 }
+EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral);
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
diff --git a/net/ipv4/netfilter/nf_nat_proto_common.c b/net/ipv4/netfilter/nf_nat_proto_common.c
index 91537f11273..6c4f11f5144 100644
--- a/net/ipv4/netfilter/nf_nat_proto_common.c
+++ b/net/ipv4/netfilter/nf_nat_proto_common.c
@@ -73,9 +73,13 @@ bool nf_nat_proto_unique_tuple(struct nf_conntrack_tuple *tuple,
 		range_size = ntohs(range->max.all) - min + 1;
 	}
 
-	off = *rover;
 	if (range->flags & IP_NAT_RANGE_PROTO_RANDOM)
-		off = net_random();
+		off = secure_ipv4_port_ephemeral(tuple->src.u3.ip, tuple->dst.u3.ip,
+						 maniptype == IP_NAT_MANIP_SRC
+						 ? tuple->dst.u.all
+						 : tuple->src.u.all);
+	else
+		off = *rover;
 
 	for (i = 0; i < range_size; i++, off++) {
 		*portptr = htons(min + off % range_size);
-- 
GitLab


From e5befbd9525d92bb074b70192eb2c69aae65fc60 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Mon, 18 Aug 2008 22:30:01 -0700
Subject: [PATCH 181/869] pkt_sched: remove bogus block (cleanup)
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

...Last block local var got just deleted.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_api.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index d91a2338877..9372ec41ce8 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1088,14 +1088,13 @@ create_n_graft:
 	}
 
 graft:
-	if (1) {
-		err = qdisc_graft(dev, p, skb, n, clid, q, NULL);
-		if (err) {
-			if (q)
-				qdisc_destroy(q);
-			return err;
-		}
+	err = qdisc_graft(dev, p, skb, n, clid, q, NULL);
+	if (err) {
+		if (q)
+			qdisc_destroy(q);
+		return err;
 	}
+
 	return 0;
 }
 
-- 
GitLab


From deb3abf15fb92a608fba630da2e8719862731714 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 18 Aug 2008 22:32:10 -0700
Subject: [PATCH 182/869] Revert "pkt_sched: Protect gen estimators under
 est_lock."

This reverts commit d4766692e72422f3b0f0e9ac6773d92baad07d51.

qdisc_destroy() now runs in RTNL fully again, so this
change is no longer needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/gen_estimator.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index a89f32fa94f..57abe8266be 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -99,7 +99,7 @@ struct gen_estimator_head
 
 static struct gen_estimator_head elist[EST_MAX_INTERVAL+1];
 
-/* Protects against NULL dereference and RCU write-side */
+/* Protects against NULL dereference */
 static DEFINE_RWLOCK(est_lock);
 
 static void est_timer(unsigned long arg)
@@ -185,7 +185,6 @@ int gen_new_estimator(struct gnet_stats_basic *bstats,
 	est->last_packets = bstats->packets;
 	est->avpps = rate_est->pps<<10;
 
-	write_lock_bh(&est_lock);
 	if (!elist[idx].timer.function) {
 		INIT_LIST_HEAD(&elist[idx].list);
 		setup_timer(&elist[idx].timer, est_timer, idx);
@@ -195,7 +194,6 @@ int gen_new_estimator(struct gnet_stats_basic *bstats,
 		mod_timer(&elist[idx].timer, jiffies + ((HZ/4) << idx));
 
 	list_add_rcu(&est->list, &elist[idx].list);
-	write_unlock_bh(&est_lock);
 	return 0;
 }
 
@@ -214,6 +212,7 @@ static void __gen_kill_estimator(struct rcu_head *head)
  * Removes the rate estimator specified by &bstats and &rate_est
  * and deletes the timer.
  *
+ * NOTE: Called under rtnl_mutex
  */
 void gen_kill_estimator(struct gnet_stats_basic *bstats,
 	struct gnet_stats_rate_est *rate_est)
@@ -227,17 +226,17 @@ void gen_kill_estimator(struct gnet_stats_basic *bstats,
 		if (!elist[idx].timer.function)
 			continue;
 
-		write_lock_bh(&est_lock);
 		list_for_each_entry_safe(e, n, &elist[idx].list, list) {
 			if (e->rate_est != rate_est || e->bstats != bstats)
 				continue;
 
+			write_lock_bh(&est_lock);
 			e->bstats = NULL;
+			write_unlock_bh(&est_lock);
 
 			list_del_rcu(&e->list);
 			call_rcu(&e->e_rcu, __gen_kill_estimator);
 		}
-		write_unlock_bh(&est_lock);
 	}
 }
 
-- 
GitLab


From f3b9605d744df537dee10fd06630f35a62b343ec Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 18 Aug 2008 22:33:05 -0700
Subject: [PATCH 183/869] Revert "pkt_sched: Add BH protection for
 qdisc_stab_lock."

This reverts commit 1cfa26661a85549063e369e2b40275eeaa7b923c.

qdisc_destroy() runs fully under RTNL again and not from softint any
longer, so this change is no longer needed.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_api.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 9372ec41ce8..ef0efeca635 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -332,7 +332,7 @@ static struct qdisc_size_table *qdisc_get_stab(struct nlattr *opt)
 	if (!s || tsize != s->tsize || (!tab && tsize > 0))
 		return ERR_PTR(-EINVAL);
 
-	spin_lock_bh(&qdisc_stab_lock);
+	spin_lock(&qdisc_stab_lock);
 
 	list_for_each_entry(stab, &qdisc_stab_list, list) {
 		if (memcmp(&stab->szopts, s, sizeof(*s)))
@@ -340,11 +340,11 @@ static struct qdisc_size_table *qdisc_get_stab(struct nlattr *opt)
 		if (tsize > 0 && memcmp(stab->data, tab, tsize * sizeof(u16)))
 			continue;
 		stab->refcnt++;
-		spin_unlock_bh(&qdisc_stab_lock);
+		spin_unlock(&qdisc_stab_lock);
 		return stab;
 	}
 
-	spin_unlock_bh(&qdisc_stab_lock);
+	spin_unlock(&qdisc_stab_lock);
 
 	stab = kmalloc(sizeof(*stab) + tsize * sizeof(u16), GFP_KERNEL);
 	if (!stab)
@@ -355,9 +355,9 @@ static struct qdisc_size_table *qdisc_get_stab(struct nlattr *opt)
 	if (tsize > 0)
 		memcpy(stab->data, tab, tsize * sizeof(u16));
 
-	spin_lock_bh(&qdisc_stab_lock);
+	spin_lock(&qdisc_stab_lock);
 	list_add_tail(&stab->list, &qdisc_stab_list);
-	spin_unlock_bh(&qdisc_stab_lock);
+	spin_unlock(&qdisc_stab_lock);
 
 	return stab;
 }
@@ -367,14 +367,14 @@ void qdisc_put_stab(struct qdisc_size_table *tab)
 	if (!tab)
 		return;
 
-	spin_lock_bh(&qdisc_stab_lock);
+	spin_lock(&qdisc_stab_lock);
 
 	if (--tab->refcnt == 0) {
 		list_del(&tab->list);
 		kfree(tab);
 	}
 
-	spin_unlock_bh(&qdisc_stab_lock);
+	spin_unlock(&qdisc_stab_lock);
 }
 EXPORT_SYMBOL(qdisc_put_stab);
 
-- 
GitLab


From 195648bbc5ae0848e82f771ecf4cd7497054c212 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 19 Aug 2008 04:00:36 -0700
Subject: [PATCH 184/869] pkt_sched: Prevent livelock in TX queue running.

If dev_deactivate() is trying to quiesce the queue, it
is theoretically possible for another cpu to livelock
trying to process that queue.  This happens because
dev_deactivate() grabs the queue spinlock as it checks
the queue state, whereas net_tx_action() does a trylock
and reschedules the qdisc if it hits the lock.

This breaks the livelock by adding a check on
__QDISC_STATE_DEACTIVATED to net_tx_action() when
the trylock fails.

Based upon feedback from Herbert Xu and Jarek Poplawski.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 8d133802372..60c51f76588 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1990,7 +1990,9 @@ static void net_tx_action(struct softirq_action *h)
 				qdisc_run(q);
 				spin_unlock(root_lock);
 			} else {
-				__netif_reschedule(q);
+				if (!test_bit(__QDISC_STATE_DEACTIVATED,
+					      &q->state))
+					__netif_reschedule(q);
 			}
 		}
 	}
-- 
GitLab


From aab3a8c7a3a6a001dd439ed00d4db17a1059803e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Tue, 19 Aug 2008 14:23:37 +0000
Subject: [PATCH 185/869] [CIFS] reindent misindented statement
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/inode.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 848286861c3..9c548f11010 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -546,7 +546,8 @@ int cifs_get_inode_info(struct inode **pinode,
 		if ((inode->i_mode & S_IWUGO) == 0 &&
 		    (attr & ATTR_READONLY) == 0)
 			inode->i_mode |= (S_IWUGO & default_mode);
-			inode->i_mode &= ~S_IFMT;
+
+		inode->i_mode &= ~S_IFMT;
 	}
 	/* clear write bits if ATTR_READONLY is set */
 	if (attr & ATTR_READONLY)
-- 
GitLab


From c85e2031eb55381a5e2f0f66c2e1d62ecd58eb85 Mon Sep 17 00:00:00 2001
From: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Date: Tue, 19 Aug 2008 11:28:23 -0400
Subject: [PATCH 186/869] Input: evdev - fix printf() format for sizeof

commit f2afa7711f8585ffc088ba538b9a510e0d5dca12 ("Input: paper over a bug in
Synaptics X driver") introduced a compiler warning on 64-bit platforms, as
sizeof() returns a size_t, not an (unsigned) int:

| drivers/input/evdev.c: In function 'handle_eviocgbit':
| drivers/input/evdev.c:684: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'

Use the proper `z' modifier for size_t, and make the printf() formats for the
sizes unsigned while we're at it.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/evdev.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index a92d8156755..3524bef62be 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -677,8 +677,8 @@ static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user
 		len = OLD_KEY_MAX;
 		if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000))
 			printk(KERN_WARNING
-				"evdev.c(EVIOCGBIT): Suspicious buffer size %d, "
-				"limiting output to %d bytes. See "
+				"evdev.c(EVIOCGBIT): Suspicious buffer size %u, "
+				"limiting output to %zu bytes. See "
 				"http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n",
 				OLD_KEY_MAX,
 				BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long));
-- 
GitLab


From d90c1add96a038fc45c7239017ba4f9a9a5ca42b Mon Sep 17 00:00:00 2001
From: Tomasz Chmielewski <mangoo@wpkg.org>
Date: Tue, 19 Aug 2008 09:54:20 +0100
Subject: [PATCH 187/869] [ARM] 5208/1: fsg-setup.c fixes

This patch against 2.6.27-rc3 does the following changes to FSG-3 setup code:

1) Enable RTC on FSG-3 (proper name is needed). This change is needed due to a recent change in i2c.

2) i variable is only used when compiling for big endian.
So move its declaration to ARMEB ifdef to silence the warning when compiling for LE.

Mailing list link:
http://lists.arm.linux.org.uk/lurker/message/20080813.091556.cae2917e.en.html

Signed-off-by: Tomasz Chmielewski <mangoo@wpkg.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-ixp4xx/fsg-setup.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 0db3a909ae6..501dfdcc39f 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -64,7 +64,7 @@ static struct platform_device fsg_i2c_gpio = {
 
 static struct i2c_board_info __initdata fsg_i2c_board_info [] = {
 	{
-		I2C_BOARD_INFO("rtc-isl1208", 0x6f),
+		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };
 
@@ -179,7 +179,6 @@ static void __init fsg_init(void)
 {
 	DECLARE_MAC_BUF(mac_buf);
 	uint8_t __iomem *f;
-	int i;
 
 	ixp4xx_sys_init();
 
@@ -228,6 +227,7 @@ static void __init fsg_init(void)
 	f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x400000);
 	if (f) {
 #ifdef __ARMEB__
+		int i;
 		for (i = 0; i < 6; i++) {
 			fsg_plat_eth[0].hwaddr[i] = readb(f + 0x3C0422 + i);
 			fsg_plat_eth[1].hwaddr[i] = readb(f + 0x3C043B + i);
-- 
GitLab


From 6848408abf1bc18d9a4d5fed3fcca812745ece05 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 16 Aug 2008 13:36:47 +0200
Subject: [PATCH 188/869] ieee1394: regression in 2.6.25: updates should happen
 before probes

Regression since commit 73cf60232ef16e1f8a64defa97214a1722db1e6c,
"ieee1394: use class iteration api":  The two loops for (1.) driver
updates and (2.) driver probes were replaced by a single loop with
bogus needs_probe checks.  Hence updates and probes were now intermixed,
and especially sbp2 updates (reconnects) held up longer than necessary.

While we fix it, change the needs_probe flag to bool type for clarity.

Tested by Damien Benoist.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/ieee1394/nodemgr.c | 29 +++++++++++++++--------------
 drivers/ieee1394/nodemgr.h |  2 +-
 2 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 994a21e5a0a..2ebd09a8942 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -844,7 +844,7 @@ static struct node_entry *nodemgr_create_node(octlet_t guid, struct csr1212_csr
 	ne->host = host;
 	ne->nodeid = nodeid;
 	ne->generation = generation;
-	ne->needs_probe = 1;
+	ne->needs_probe = true;
 
 	ne->guid = guid;
 	ne->guid_vendor_id = (guid >> 40) & 0xffffff;
@@ -1144,7 +1144,7 @@ static void nodemgr_process_root_directory(struct host_info *hi, struct node_ent
 	struct csr1212_keyval *kv, *vendor_name_kv = NULL;
 	u8 last_key_id = 0;
 
-	ne->needs_probe = 0;
+	ne->needs_probe = false;
 
 	csr1212_for_each_dir_entry(ne->csr, kv, ne->csr->root_kv, dentry) {
 		switch (kv->key.id) {
@@ -1295,7 +1295,7 @@ static void nodemgr_update_node(struct node_entry *ne, struct csr1212_csr *csr,
 		nodemgr_update_bus_options(ne);
 
 		/* Mark the node as new, so it gets re-probed */
-		ne->needs_probe = 1;
+		ne->needs_probe = true;
 	} else {
 		/* old cache is valid, so update its generation */
 		struct nodemgr_csr_info *ci = ne->csr->private;
@@ -1566,28 +1566,27 @@ static void nodemgr_probe_ne(struct host_info *hi, struct node_entry *ne, int ge
 struct probe_param {
 	struct host_info *hi;
 	int generation;
+	bool probe_now;
 };
 
-static int __nodemgr_node_probe(struct device *dev, void *data)
+static int node_probe(struct device *dev, void *data)
 {
-	struct probe_param *param = (struct probe_param *)data;
+	struct probe_param *p = data;
 	struct node_entry *ne;
 
 	ne = container_of(dev, struct node_entry, node_dev);
-	if (!ne->needs_probe)
-		nodemgr_probe_ne(param->hi, ne, param->generation);
-	if (ne->needs_probe)
-		nodemgr_probe_ne(param->hi, ne, param->generation);
+	if (ne->needs_probe == p->probe_now)
+		nodemgr_probe_ne(p->hi, ne, p->generation);
 	return 0;
 }
 
 static void nodemgr_node_probe(struct host_info *hi, int generation)
 {
 	struct hpsb_host *host = hi->host;
-	struct probe_param param;
+	struct probe_param p;
 
-	param.hi = hi;
-	param.generation = generation;
+	p.hi = hi;
+	p.generation = generation;
 	/* Do some processing of the nodes we've probed. This pulls them
 	 * into the sysfs layer if needed, and can result in processing of
 	 * unit-directories, or just updating the node and it's
@@ -1597,8 +1596,10 @@ static void nodemgr_node_probe(struct host_info *hi, int generation)
 	 * while probes are time-consuming. (Well, those probes need some
 	 * improvement...) */
 
-	class_for_each_device(&nodemgr_ne_class, NULL, &param,
-			      __nodemgr_node_probe);
+	p.probe_now = false;
+	class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe);
+	p.probe_now = true;
+	class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe);
 
 	/* If we had a bus reset while we were scanning the bus, it is
 	 * possible that we did not probe all nodes.  In that case, we
diff --git a/drivers/ieee1394/nodemgr.h b/drivers/ieee1394/nodemgr.h
index 919e92e2a95..6eb26465a84 100644
--- a/drivers/ieee1394/nodemgr.h
+++ b/drivers/ieee1394/nodemgr.h
@@ -97,7 +97,7 @@ struct node_entry {
 	struct hpsb_host *host;		/* Host this node is attached to */
 	nodeid_t nodeid;		/* NodeID */
 	struct bus_options busopt;	/* Bus Options */
-	int needs_probe;
+	bool needs_probe;
 	unsigned int generation;	/* Synced with hpsb generation */
 
 	/* The following is read from the config rom */
-- 
GitLab


From c921a9745705ed62a949192ef9128c60d6c63874 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 16 Aug 2008 13:38:11 +0200
Subject: [PATCH 189/869] ieee1394: don't drop nodes during bus reset series

nodemgr_node_probe checked for generation increments too late and
therefore prematurely reported nodes as "suspended".

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11349.  Reported and
tested by Damien Benoist.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/ieee1394/nodemgr.c | 40 ++++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 19 deletions(-)

diff --git a/drivers/ieee1394/nodemgr.c b/drivers/ieee1394/nodemgr.c
index 2ebd09a8942..16240a78965 100644
--- a/drivers/ieee1394/nodemgr.c
+++ b/drivers/ieee1394/nodemgr.c
@@ -1574,6 +1574,9 @@ static int node_probe(struct device *dev, void *data)
 	struct probe_param *p = data;
 	struct node_entry *ne;
 
+	if (p->generation != get_hpsb_generation(p->hi->host))
+		return -EAGAIN;
+
 	ne = container_of(dev, struct node_entry, node_dev);
 	if (ne->needs_probe == p->probe_now)
 		nodemgr_probe_ne(p->hi, ne, p->generation);
@@ -1582,42 +1585,41 @@ static int node_probe(struct device *dev, void *data)
 
 static void nodemgr_node_probe(struct host_info *hi, int generation)
 {
-	struct hpsb_host *host = hi->host;
 	struct probe_param p;
 
 	p.hi = hi;
 	p.generation = generation;
-	/* Do some processing of the nodes we've probed. This pulls them
+	/*
+	 * Do some processing of the nodes we've probed. This pulls them
 	 * into the sysfs layer if needed, and can result in processing of
 	 * unit-directories, or just updating the node and it's
 	 * unit-directories.
 	 *
 	 * Run updates before probes. Usually, updates are time-critical
-	 * while probes are time-consuming. (Well, those probes need some
-	 * improvement...) */
-
+	 * while probes are time-consuming.
+	 *
+	 * Meanwhile, another bus reset may have happened. In this case we
+	 * skip everything here and let the next bus scan handle it.
+	 * Otherwise we may prematurely remove nodes which are still there.
+	 */
 	p.probe_now = false;
-	class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe);
-	p.probe_now = true;
-	class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe);
+	if (class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe) != 0)
+		return;
 
-	/* If we had a bus reset while we were scanning the bus, it is
-	 * possible that we did not probe all nodes.  In that case, we
-	 * skip the clean up for now, since we could remove nodes that
-	 * were still on the bus.  Another bus scan is pending which will
-	 * do the clean up eventually.
-	 *
+	p.probe_now = true;
+	if (class_for_each_device(&nodemgr_ne_class, NULL, &p, node_probe) != 0)
+		return;
+	/*
 	 * Now let's tell the bus to rescan our devices. This may seem
 	 * like overhead, but the driver-model core will only scan a
 	 * device for a driver when either the device is added, or when a
 	 * new driver is added. A bus reset is a good reason to rescan
 	 * devices that were there before.  For example, an sbp2 device
 	 * may become available for login, if the host that held it was
-	 * just removed.  */
-
-	if (generation == get_hpsb_generation(host))
-		if (bus_rescan_devices(&ieee1394_bus_type))
-			HPSB_DEBUG("bus_rescan_devices had an error");
+	 * just removed.
+	 */
+	if (bus_rescan_devices(&ieee1394_bus_type) != 0)
+		HPSB_DEBUG("bus_rescan_devices had an error");
 }
 
 static int nodemgr_send_resume_packet(struct hpsb_host *host)
-- 
GitLab


From a3384067fb0df9c58e112ac6a5ec9beb7d169482 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 16 Aug 2008 13:39:26 +0200
Subject: [PATCH 190/869] ieee1394: sbp2: let nodemgr retry node updates during
 bus reset series

sbp2 was too quick to report .update() to the ieee1394 core as failed.
(Logged as "Failed to reconnect to sbp2 device!".)  The core would then
unbind sbp2 from the device.

This is not justified if the .update() failed because another bus reset
happened.  We check this and tell the ieee1394 that .update() succeeded,
and the core will call sbp2's .update() for the new bus reset as well.

This improves reconnection/re-login especially on buses with several
disks as they may issue bus resets in close succession when they come
online.

Tested by Damien Benoist.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/ieee1394/sbp2.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 9cbf3154d24..1d6ad343553 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -731,15 +731,26 @@ static int sbp2_update(struct unit_directory *ud)
 {
 	struct sbp2_lu *lu = ud->device.driver_data;
 
-	if (sbp2_reconnect_device(lu)) {
-		/* Reconnect has failed. Perhaps we didn't reconnect fast
-		 * enough. Try a regular login, but first log out just in
-		 * case of any weirdness. */
+	if (sbp2_reconnect_device(lu) != 0) {
+		/*
+		 * Reconnect failed.  If another bus reset happened,
+		 * let nodemgr proceed and call sbp2_update again later
+		 * (or sbp2_remove if this node went away).
+		 */
+		if (!hpsb_node_entry_valid(lu->ne))
+			return 0;
+		/*
+		 * Or the target rejected the reconnect because we weren't
+		 * fast enough.  Try a regular login, but first log out
+		 * just in case of any weirdness.
+		 */
 		sbp2_logout_device(lu);
 
-		if (sbp2_login_device(lu)) {
-			/* Login failed too, just fail, and the backend
-			 * will call our sbp2_remove for us */
+		if (sbp2_login_device(lu) != 0) {
+			if (!hpsb_node_entry_valid(lu->ne))
+				return 0;
+
+			/* Maybe another initiator won the login. */
 			SBP2_ERR("Failed to reconnect to sbp2 device!");
 			return -EBUSY;
 		}
-- 
GitLab


From 30b0aa7c9a5e769a874a456cd56396eebf164b91 Mon Sep 17 00:00:00 2001
From: Stefan Richter <stefanr@s5r6.in-berlin.de>
Date: Sat, 16 Aug 2008 21:52:28 +0200
Subject: [PATCH 191/869] firewire: Kconfig help update

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
---
 drivers/firewire/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig
index fa6d6abefd4..45090243820 100644
--- a/drivers/firewire/Kconfig
+++ b/drivers/firewire/Kconfig
@@ -12,8 +12,8 @@ config FIREWIRE
 	  This is the "Juju" FireWire stack, a new alternative implementation
 	  designed for robustness and simplicity.  You can build either this
 	  stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both.
-	  Please read http://wiki.linux1394.org/JujuMigration before you
-	  enable the new stack.
+	  Please read http://ieee1394.wiki.kernel.org/index.php/Juju_Migration
+	  before you enable the new stack.
 
 	  To compile this driver as a module, say M here: the module will be
 	  called firewire-core.
-- 
GitLab


From cb7691b648bddbfaf6dd8d8068273dbb18d2484c Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Mon, 18 Aug 2008 15:41:05 -0400
Subject: [PATCH 192/869] cifs: add local server pointer to cifs_setup_session

cifs_setup_session references pSesInfo->server several times. That
pointer shouldn't change during the life of the function so grab it
once and store it in a local var. This makes the code look a little
cleaner too.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/connect.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 0711db65afe..4c13bcdb92a 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -3598,19 +3598,21 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 	char ntlm_session_key[CIFS_SESS_KEY_SIZE];
 	bool ntlmv2_flag = false;
 	int first_time = 0;
+	struct TCP_Server_Info *server = pSesInfo->server;
 
 	/* what if server changes its buffer size after dropping the session? */
-	if (pSesInfo->server->maxBuf == 0) /* no need to send on reconnect */ {
+	if (server->maxBuf == 0) /* no need to send on reconnect */ {
 		rc = CIFSSMBNegotiate(xid, pSesInfo);
-		if (rc == -EAGAIN) /* retry only once on 1st time connection */ {
+		if (rc == -EAGAIN) {
+			/* retry only once on 1st time connection */
 			rc = CIFSSMBNegotiate(xid, pSesInfo);
 			if (rc == -EAGAIN)
 				rc = -EHOSTDOWN;
 		}
 		if (rc == 0) {
 			spin_lock(&GlobalMid_Lock);
-			if (pSesInfo->server->tcpStatus != CifsExiting)
-				pSesInfo->server->tcpStatus = CifsGood;
+			if (server->tcpStatus != CifsExiting)
+				server->tcpStatus = CifsGood;
 			else
 				rc = -EHOSTDOWN;
 			spin_unlock(&GlobalMid_Lock);
@@ -3623,23 +3625,22 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 		goto ss_err_exit;
 
 	pSesInfo->flags = 0;
-	pSesInfo->capabilities = pSesInfo->server->capabilities;
+	pSesInfo->capabilities = server->capabilities;
 	if (linuxExtEnabled == 0)
 		pSesInfo->capabilities &= (~CAP_UNIX);
 	/*	pSesInfo->sequence_number = 0;*/
 	cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
-		 pSesInfo->server->secMode,
-		 pSesInfo->server->capabilities,
-		 pSesInfo->server->timeAdj));
+		 server->secMode, server->capabilities, server->timeAdj));
+
 	if (experimEnabled < 2)
 		rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
 	else if (extended_security
 			&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
-			&& (pSesInfo->server->secType == NTLMSSP)) {
+			&& (server->secType == NTLMSSP)) {
 		rc = -EOPNOTSUPP;
 	} else if (extended_security
 			&& (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
-			&& (pSesInfo->server->secType == RawNTLMSSP)) {
+			&& (server->secType == RawNTLMSSP)) {
 		cFYI(1, ("NTLMSSP sesssetup"));
 		rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag,
 						   nls_info);
@@ -3668,12 +3669,12 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 
 			} else {
 				SMBNTencrypt(pSesInfo->password,
-					     pSesInfo->server->cryptKey,
+					     server->cryptKey,
 					     ntlm_session_key);
 
 				if (first_time)
 					cifs_calculate_mac_key(
-					     &pSesInfo->server->mac_signing_key,
+					     &server->mac_signing_key,
 					     ntlm_session_key,
 					     pSesInfo->password);
 			}
@@ -3686,13 +3687,13 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
 						      nls_info);
 		}
 	} else { /* old style NTLM 0.12 session setup */
-		SMBNTencrypt(pSesInfo->password, pSesInfo->server->cryptKey,
+		SMBNTencrypt(pSesInfo->password, server->cryptKey,
 			     ntlm_session_key);
 
 		if (first_time)
-			cifs_calculate_mac_key(
-					&pSesInfo->server->mac_signing_key,
-					ntlm_session_key, pSesInfo->password);
+			cifs_calculate_mac_key(&server->mac_signing_key,
+						ntlm_session_key,
+						pSesInfo->password);
 
 		rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info);
 	}
-- 
GitLab


From c16fefa56334e8d0197492607e473fdbb813073f Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Tue, 19 Aug 2008 19:35:33 +0000
Subject: [PATCH 193/869] [CIFS] distinguish between Kerberos and MSKerberos in
 upcall

Properly handle MSKRB5 by passing sec=mskrb5 to the upcall so that the
spengo blob can be generated appropriately. Also, make
decode_negTokenInit prefer whichever mechanism is first in the list.

Needed for some NetApp servers, and possibly some older
versions of Windows which treat the two KRB5 mechanisms differently.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/asn1.c        | 11 ++++++++---
 fs/cifs/cifs_spnego.c |  4 +++-
 fs/cifs/cifsglob.h    |  3 ++-
 fs/cifs/sess.c        |  2 +-
 4 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index 5fabd2caf93..1b09f167006 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -476,6 +476,7 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 	unsigned int cls, con, tag, oidlen, rc;
 	bool use_ntlmssp = false;
 	bool use_kerberos = false;
+	bool use_mskerberos = false;
 
 	*secType = NTLM; /* BB eventually make Kerberos or NLTMSSP the default*/
 
@@ -574,10 +575,12 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 					 *(oid + 1), *(oid + 2), *(oid + 3)));
 
 				if (compare_oid(oid, oidlen, MSKRB5_OID,
-						MSKRB5_OID_LEN))
-					use_kerberos = true;
+						MSKRB5_OID_LEN) &&
+						!use_kerberos)
+					use_mskerberos = true;
 				else if (compare_oid(oid, oidlen, KRB5_OID,
-						     KRB5_OID_LEN))
+						     KRB5_OID_LEN) &&
+						     !use_mskerberos)
 					use_kerberos = true;
 				else if (compare_oid(oid, oidlen, NTLMSSP_OID,
 						     NTLMSSP_OID_LEN))
@@ -630,6 +633,8 @@ decode_negTokenInit(unsigned char *security_blob, int length,
 
 	if (use_kerberos)
 		*secType = Kerberos;
+	else if (use_mskerberos)
+		*secType = MSKerberos;
 	else if (use_ntlmssp)
 		*secType = NTLMSSP;
 
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 2434ab0e879..117ef4bba68 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -114,9 +114,11 @@ cifs_get_spnego_key(struct cifsSesInfo *sesInfo)
 
 	dp = description + strlen(description);
 
-	/* for now, only sec=krb5 is valid */
+	/* for now, only sec=krb5 and sec=mskrb5 are valid */
 	if (server->secType == Kerberos)
 		sprintf(dp, ";sec=krb5");
+	else if (server->secType == MSKerberos)
+		sprintf(dp, ";sec=mskrb5");
 	else
 		goto out;
 
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 7e1cf262eff..8dfd6f24d48 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -80,7 +80,8 @@ enum securityEnum {
 	NTLMv2,			/* Legacy NTLM auth with NTLMv2 hash */
 	RawNTLMSSP,		/* NTLMSSP without SPNEGO */
 	NTLMSSP,		/* NTLMSSP via SPNEGO */
-	Kerberos		/* Kerberos via SPNEGO */
+	Kerberos,		/* Kerberos via SPNEGO */
+	MSKerberos,		/* MS Kerberos via SPNEGO */
 };
 
 enum protocolEnum {
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index ed150efbe27..3188e4d9cdd 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -505,7 +505,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 			unicode_ssetup_strings(&bcc_ptr, ses, nls_cp);
 		} else
 			ascii_ssetup_strings(&bcc_ptr, ses, nls_cp);
-	} else if (type == Kerberos) {
+	} else if (type == Kerberos || type == MSKerberos) {
 #ifdef CONFIG_CIFS_UPCALL
 		struct cifs_spnego_msg *msg;
 		spnego_key = cifs_get_spnego_key(ses);
-- 
GitLab


From f607e3a03c90e8c050cb0c12ec9967c2925cc812 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 19 Aug 2008 13:34:59 -0700
Subject: [PATCH 194/869] Revert "[CPUFREQ][2/2] preregister support for
 powernow-k8"

This reverts commit 34ae7f35a21694aa5cb8829dc5142c39d73d6ba0, which has
been reported to cause a number of problems.  During suspend and resume,
it apparently causes a crash in a CPU hotplug notifier to happen,
although the exact details are sketchy because of the inability to get
good traces during the suspend sequence.

See buzilla entries

	http://bugzilla.kernel.org/show_bug.cgi?id=11296
	http://bugzilla.kernel.org/show_bug.cgi?id=11339

for more examples and details.

[ Mark: "Revert the patch for now.  I'm still looking into getting a
  reliable reproduction and I do not have a fix at this time." ]

Requested-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Mark Langsdorf <mark.langsdorf@amd.com>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@inux-foundation.org>
---
 arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 109 +++++++---------------
 arch/x86/kernel/cpu/cpufreq/powernow-k8.h |   3 +-
 2 files changed, 37 insertions(+), 75 deletions(-)

diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 4e7271999a7..84bb395038d 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -737,63 +737,44 @@ static int find_psb_table(struct powernow_k8_data *data)
 #ifdef CONFIG_X86_POWERNOW_K8_ACPI
 static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index)
 {
-	if (!data->acpi_data->state_count || (cpu_family == CPU_HW_PSTATE))
+	if (!data->acpi_data.state_count || (cpu_family == CPU_HW_PSTATE))
 		return;
 
-	data->irt = (data->acpi_data->states[index].control >> IRT_SHIFT) & IRT_MASK;
-	data->rvo = (data->acpi_data->states[index].control >> RVO_SHIFT) & RVO_MASK;
-	data->exttype = (data->acpi_data->states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
-	data->plllock = (data->acpi_data->states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
-	data->vidmvs = 1 << ((data->acpi_data->states[index].control >> MVS_SHIFT) & MVS_MASK);
-	data->vstable = (data->acpi_data->states[index].control >> VST_SHIFT) & VST_MASK;
-}
-
-
-static struct acpi_processor_performance *acpi_perf_data;
-static int preregister_valid;
-
-static int powernow_k8_cpu_preinit_acpi(void)
-{
-	acpi_perf_data = alloc_percpu(struct acpi_processor_performance);
-	if (!acpi_perf_data)
-		return -ENODEV;
-
-	if (acpi_processor_preregister_performance(acpi_perf_data))
-		return -ENODEV;
-	else
-		preregister_valid = 1;
-	return 0;
+	data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
+	data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
+	data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
+	data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
+	data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
+	data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
 }
 
 static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 {
 	struct cpufreq_frequency_table *powernow_table;
 	int ret_val;
-	int cpu = 0;
 
-	data->acpi_data = percpu_ptr(acpi_perf_data, cpu);
-	if (acpi_processor_register_performance(data->acpi_data, data->cpu)) {
+	if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
 		dprintk("register performance failed: bad ACPI data\n");
 		return -EIO;
 	}
 
 	/* verify the data contained in the ACPI structures */
-	if (data->acpi_data->state_count <= 1) {
+	if (data->acpi_data.state_count <= 1) {
 		dprintk("No ACPI P-States\n");
 		goto err_out;
 	}
 
-	if ((data->acpi_data->control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
-		(data->acpi_data->status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+	if ((data->acpi_data.control_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+		(data->acpi_data.status_register.space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
 		dprintk("Invalid control/status registers (%x - %x)\n",
-			data->acpi_data->control_register.space_id,
-			data->acpi_data->status_register.space_id);
+			data->acpi_data.control_register.space_id,
+			data->acpi_data.status_register.space_id);
 		goto err_out;
 	}
 
 	/* fill in data->powernow_table */
 	powernow_table = kmalloc((sizeof(struct cpufreq_frequency_table)
-		* (data->acpi_data->state_count + 1)), GFP_KERNEL);
+		* (data->acpi_data.state_count + 1)), GFP_KERNEL);
 	if (!powernow_table) {
 		dprintk("powernow_table memory alloc failure\n");
 		goto err_out;
@@ -806,12 +787,12 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	if (ret_val)
 		goto err_out_mem;
 
-	powernow_table[data->acpi_data->state_count].frequency = CPUFREQ_TABLE_END;
-	powernow_table[data->acpi_data->state_count].index = 0;
+	powernow_table[data->acpi_data.state_count].frequency = CPUFREQ_TABLE_END;
+	powernow_table[data->acpi_data.state_count].index = 0;
 	data->powernow_table = powernow_table;
 
 	/* fill in data */
-	data->numps = data->acpi_data->state_count;
+	data->numps = data->acpi_data.state_count;
 	if (first_cpu(per_cpu(cpu_core_map, data->cpu)) == data->cpu)
 		print_basics(data);
 	powernow_k8_acpi_pst_values(data, 0);
@@ -819,31 +800,16 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	/* notify BIOS that we exist */
 	acpi_processor_notify_smm(THIS_MODULE);
 
-	/* determine affinity, from ACPI if available */
-	if (preregister_valid) {
-		if ((data->acpi_data->shared_type == CPUFREQ_SHARED_TYPE_ALL) ||
-			(data->acpi_data->shared_type == CPUFREQ_SHARED_TYPE_ANY))
-			data->starting_core_affinity = data->acpi_data->shared_cpu_map;
-		else
-			data->starting_core_affinity = cpumask_of_cpu(data->cpu);
-	} else {
-	/* best guess from family if not */
-		if (cpu_family == CPU_HW_PSTATE)
-			data->starting_core_affinity = cpumask_of_cpu(data->cpu);
-		else
-			data->starting_core_affinity = per_cpu(cpu_core_map, data->cpu);
-	}
-
 	return 0;
 
 err_out_mem:
 	kfree(powernow_table);
 
 err_out:
-	acpi_processor_unregister_performance(data->acpi_data, data->cpu);
+	acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
 
 	/* data->acpi_data.state_count informs us at ->exit() whether ACPI was used */
-	data->acpi_data->state_count = 0;
+	data->acpi_data.state_count = 0;
 
 	return -ENODEV;
 }
@@ -855,10 +821,10 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf
 	rdmsr(MSR_PSTATE_CUR_LIMIT, hi, lo);
 	data->max_hw_pstate = (hi & HW_PSTATE_MAX_MASK) >> HW_PSTATE_MAX_SHIFT;
 
-	for (i = 0; i < data->acpi_data->state_count; i++) {
+	for (i = 0; i < data->acpi_data.state_count; i++) {
 		u32 index;
 
-		index = data->acpi_data->states[i].control & HW_PSTATE_MASK;
+		index = data->acpi_data.states[i].control & HW_PSTATE_MASK;
 		if (index > data->max_hw_pstate) {
 			printk(KERN_ERR PFX "invalid pstate %d - bad value %d.\n", i, index);
 			printk(KERN_ERR PFX "Please report to BIOS manufacturer\n");
@@ -874,7 +840,7 @@ static int fill_powernow_table_pstate(struct powernow_k8_data *data, struct cpuf
 
 		powernow_table[i].index = index;
 
-		powernow_table[i].frequency = data->acpi_data->states[i].core_frequency * 1000;
+		powernow_table[i].frequency = data->acpi_data.states[i].core_frequency * 1000;
 	}
 	return 0;
 }
@@ -883,16 +849,16 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf
 {
 	int i;
 	int cntlofreq = 0;
-	for (i = 0; i < data->acpi_data->state_count; i++) {
+	for (i = 0; i < data->acpi_data.state_count; i++) {
 		u32 fid;
 		u32 vid;
 
 		if (data->exttype) {
-			fid = data->acpi_data->states[i].status & EXT_FID_MASK;
-			vid = (data->acpi_data->states[i].status >> VID_SHIFT) & EXT_VID_MASK;
+			fid = data->acpi_data.states[i].status & EXT_FID_MASK;
+			vid = (data->acpi_data.states[i].status >> VID_SHIFT) & EXT_VID_MASK;
 		} else {
-			fid = data->acpi_data->states[i].control & FID_MASK;
-			vid = (data->acpi_data->states[i].control >> VID_SHIFT) & VID_MASK;
+			fid = data->acpi_data.states[i].control & FID_MASK;
+			vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
 		}
 
 		dprintk("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
@@ -933,10 +899,10 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf
 				cntlofreq = i;
 		}
 
-		if (powernow_table[i].frequency != (data->acpi_data->states[i].core_frequency * 1000)) {
+		if (powernow_table[i].frequency != (data->acpi_data.states[i].core_frequency * 1000)) {
 			printk(KERN_INFO PFX "invalid freq entries %u kHz vs. %u kHz\n",
 				powernow_table[i].frequency,
-				(unsigned int) (data->acpi_data->states[i].core_frequency * 1000));
+				(unsigned int) (data->acpi_data.states[i].core_frequency * 1000));
 			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
 			continue;
 		}
@@ -946,12 +912,11 @@ static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct cpuf
 
 static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data)
 {
-	if (data->acpi_data->state_count)
-		acpi_processor_unregister_performance(data->acpi_data, data->cpu);
+	if (data->acpi_data.state_count)
+		acpi_processor_unregister_performance(&data->acpi_data, data->cpu);
 }
 
 #else
-static int powernow_k8_cpu_preinit_acpi(void) { return -ENODEV; }
 static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data) { return -ENODEV; }
 static void powernow_k8_cpu_exit_acpi(struct powernow_k8_data *data) { return; }
 static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned int index) { return; }
@@ -1136,7 +1101,7 @@ static int powernowk8_verify(struct cpufreq_policy *pol)
 static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
-	cpumask_t oldmask = CPU_MASK_ALL;
+	cpumask_t oldmask;
 	int rc;
 
 	if (!cpu_online(pol->cpu))
@@ -1209,7 +1174,10 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
 	/* run on any CPU again */
 	set_cpus_allowed_ptr(current, &oldmask);
 
-	pol->cpus = data->starting_core_affinity;
+	if (cpu_family == CPU_HW_PSTATE)
+		pol->cpus = cpumask_of_cpu(pol->cpu);
+	else
+		pol->cpus = per_cpu(cpu_core_map, pol->cpu);
 	data->available_cores = &(pol->cpus);
 
 	/* Take a crude guess here.
@@ -1332,7 +1300,6 @@ static int __cpuinit powernowk8_init(void)
 	}
 
 	if (supported_cpus == num_online_cpus()) {
-		powernow_k8_cpu_preinit_acpi();
 		printk(KERN_INFO PFX "Found %d %s "
 			"processors (%d cpu cores) (" VERSION ")\n",
 			num_online_nodes(),
@@ -1349,10 +1316,6 @@ static void __exit powernowk8_exit(void)
 	dprintk("exit\n");
 
 	cpufreq_unregister_driver(&cpufreq_amd64_driver);
-
-#ifdef CONFIG_X86_POWERNOW_K8_ACPI
-	free_percpu(acpi_perf_data);
-#endif
 }
 
 MODULE_AUTHOR("Paul Devriendt <paul.devriendt@amd.com> and Mark Langsdorf <mark.langsdorf@amd.com>");
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
index a62612cd4be..ab48cfed4d9 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h
@@ -33,13 +33,12 @@ struct powernow_k8_data {
 #ifdef CONFIG_X86_POWERNOW_K8_ACPI
 	/* the acpi table needs to be kept. it's only available if ACPI was
 	 * used to determine valid frequency/vid/fid states */
-	struct acpi_processor_performance *acpi_data;
+	struct acpi_processor_performance acpi_data;
 #endif
 	/* we need to keep track of associated cores, but let cpufreq
 	 * handle hotplug events - so just point at cpufreq pol->cpus
 	 * structure */
 	cpumask_t *available_cores;
-	cpumask_t starting_core_affinity;
 };
 
 
-- 
GitLab


From 3d2af3465e91335bd1dbf36b19e92079d901409f Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Tue, 19 Aug 2008 20:51:09 +0000
Subject: [PATCH 195/869] [CIFS] Kerberos support not considered experimental
 anymore

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/Kconfig     |  1 -
 fs/cifs/README | 30 ++++++++++++++++++++++++++----
 2 files changed, 26 insertions(+), 5 deletions(-)

diff --git a/fs/Kconfig b/fs/Kconfig
index d3873583360..f0427105a61 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1984,7 +1984,6 @@ config CIFS_EXPERIMENTAL
 
 config CIFS_UPCALL
 	  bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
-	  depends on CIFS_EXPERIMENTAL
 	  depends on KEYS
 	  help
 	    Enables an upcall mechanism for CIFS which accesses
diff --git a/fs/cifs/README b/fs/cifs/README
index 2bd6fe556f8..68b5c1169d9 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -642,8 +642,30 @@ The statistics for the number of total SMBs and oplock breaks are different in
 that they represent all for that share, not just those for which the server
 returned success.
 	
-Also note that "cat /proc/fs/cifs/DebugData" will display information about 
+Also note that "cat /proc/fs/cifs/DebugData" will display information about
 the active sessions and the shares that are mounted.
-Enabling Kerberos (extended security) works when CONFIG_CIFS_EXPERIMENTAL is
-on but requires a user space helper (from the Samba project). NTLM and NTLMv2 and
-LANMAN support do not require this helper.
+
+Enabling Kerberos (extended security) works but requires version 1.2 or later
+of the helper program cifs.upcall to be present and to be configured in the
+/etc/request-key.conf file.  The cifs.upcall helper program is from the Samba
+project(http://www.samba.org). NTLM and NTLMv2 and LANMAN support do not
+require this helper. Note that NTLMv2 security (which does not require the
+cifs.upcall helper program), instead of using Kerberos, is sufficient for
+some use cases.
+
+Enabling DFS support (used to access shares transparently in an MS-DFS
+global name space) requires that CONFIG_CIFS_EXPERIMENTAL be enabled.  In
+addition, DFS support for target shares which are specified as UNC
+names which begin with host names (rather than IP addresses) requires
+a user space helper (such as cifs.upcall) to be present in order to
+translate host names to ip address, and the user space helper must also
+be configured in the file /etc/request-key.conf
+
+To use cifs Kerberos and DFS support, the Linux keyutils package should be
+installed and something like the following lines should be added to the
+/etc/request-key.conf file:
+
+create cifs.spnego * * /usr/local/sbin/cifs.upcall %k
+create dns_resolver * * /usr/local/sbin/cifs.upcall %k
+
+
-- 
GitLab


From a77a57a1a22afc31891d95879fe3cf2ab03838b0 Mon Sep 17 00:00:00 2001
From: Roland Dreier <rolandd@cisco.com>
Date: Tue, 19 Aug 2008 15:01:32 -0700
Subject: [PATCH 196/869] IPoIB: Fix deadlock on RTNL in ipoib_stop()

Commit c8c2afe3 ("IPoIB: Use rtnl lock/unlock when changing device
flags") added a call to rtnl_lock() in ipoib_mcast_join_task(), which
is run from the ipoib_workqueue.  However, ipoib_stop() (which is run
inside rtnl_lock()) flushes this workqueue, which leads to a deadlock
if the join task is pending.

Fix this by simply not flushing the workqueue from ipoib_stop().  It
turns out that we really don't care about workqueue tasks running
during or after ipoib_stop(), as long as we make sure to flush the
workqueue before unregistering a netdev.

This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1114>.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
---
 drivers/infiniband/ulp/ipoib/ipoib_main.c     | 19 +++++++++----------
 .../infiniband/ulp/ipoib/ipoib_multicast.c    | 10 +++++++++-
 2 files changed, 18 insertions(+), 11 deletions(-)

diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c
index f51201b17bf..7e9e218738f 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -156,14 +156,8 @@ static int ipoib_stop(struct net_device *dev)
 
 	netif_stop_queue(dev);
 
-	/*
-	 * Now flush workqueue to make sure a scheduled task doesn't
-	 * bring our internal state back up.
-	 */
-	flush_workqueue(ipoib_workqueue);
-
-	ipoib_ib_dev_down(dev, 1);
-	ipoib_ib_dev_stop(dev, 1);
+	ipoib_ib_dev_down(dev, 0);
+	ipoib_ib_dev_stop(dev, 0);
 
 	if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
 		struct ipoib_dev_priv *cpriv;
@@ -1314,7 +1308,7 @@ sysfs_failed:
 
 register_failed:
 	ib_unregister_event_handler(&priv->event_handler);
-	flush_scheduled_work();
+	flush_workqueue(ipoib_workqueue);
 
 event_failed:
 	ipoib_dev_cleanup(priv->dev);
@@ -1373,7 +1367,12 @@ static void ipoib_remove_one(struct ib_device *device)
 
 	list_for_each_entry_safe(priv, tmp, dev_list, list) {
 		ib_unregister_event_handler(&priv->event_handler);
-		flush_scheduled_work();
+
+		rtnl_lock();
+		dev_change_flags(priv->dev, priv->dev->flags & ~IFF_UP);
+		rtnl_unlock();
+
+		flush_workqueue(ipoib_workqueue);
 
 		unregister_netdev(priv->dev);
 		ipoib_dev_cleanup(priv->dev);
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 8950e9546f4..ac33c8f3ea8 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -392,8 +392,16 @@ static int ipoib_mcast_join_complete(int status,
 					   &priv->mcast_task, 0);
 		mutex_unlock(&mcast_mutex);
 
-		if (mcast == priv->broadcast)
+		if (mcast == priv->broadcast) {
+			/*
+			 * Take RTNL lock here to avoid racing with
+			 * ipoib_stop() and turning the carrier back
+			 * on while a device is being removed.
+			 */
+			rtnl_lock();
 			netif_carrier_on(dev);
+			rtnl_unlock();
+		}
 
 		return 0;
 	}
-- 
GitLab


From 1b04624f93bb1c4f9495b8476d1dd0200af019e2 Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Tue, 19 Aug 2008 20:37:07 -0700
Subject: [PATCH 197/869] tracehook: fix SA_NOCLDWAIT

I outwitted myself again in commit 2b2a1ff64afbadac842bbc58c5166962cf4f7664,
and broke the SA_NOCLDWAIT behavior so it leaks zombies.  This fixes it.

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Roland McGrath <roland@redhat.com>
---
 kernel/signal.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/kernel/signal.c b/kernel/signal.c
index c539f60c6f4..e661b01d340 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -1338,6 +1338,7 @@ int do_notify_parent(struct task_struct *tsk, int sig)
 	struct siginfo info;
 	unsigned long flags;
 	struct sighand_struct *psig;
+	int ret = sig;
 
 	BUG_ON(sig == -1);
 
@@ -1402,7 +1403,7 @@ int do_notify_parent(struct task_struct *tsk, int sig)
 		 * is implementation-defined: we do (if you don't want
 		 * it, just use SIG_IGN instead).
 		 */
-		tsk->exit_signal = -1;
+		ret = tsk->exit_signal = -1;
 		if (psig->action[SIGCHLD-1].sa.sa_handler == SIG_IGN)
 			sig = -1;
 	}
@@ -1411,7 +1412,7 @@ int do_notify_parent(struct task_struct *tsk, int sig)
 	__wake_up_parent(tsk, tsk->parent);
 	spin_unlock_irqrestore(&psig->siglock, flags);
 
-	return sig;
+	return ret;
 }
 
 static void do_notify_parent_cldstop(struct task_struct *tsk, int why)
-- 
GitLab


From c6744955d0ec0cb485c28c51eeb7185e260f6172 Mon Sep 17 00:00:00 2001
From: Samuel Sieb <samuel@sieb.net>
Date: Wed, 6 Aug 2008 22:06:29 -0700
Subject: [PATCH 198/869] x86: fix "kernel won't boot on a Cyrix MediaGXm
 (Geode)"

Cyrix MediaGXm/Cx5530 Unicorn Revision 1.19.3B has stopped
booting starting at v2.6.22.

The reason is this commit:

> commit f25f64ed5bd3c2932493681bdfdb483ea707da0a
> Author: Juergen Beisert <juergen@kreuzholzen.de>
> Date:   Sun Jul 22 11:12:38 2007 +0200
>
>     x86: Replace NSC/Cyrix specific chipset access macros by inlined functions.

this commit activated a macro which was dormant before due to (buggy)
macro side-effects.

I've looked through various datasheets and found that the GXm and GXLV
Geode processors don't have an incrementor.

Remove the incrementor setup entirely.  As the incrementor value
differs according to clock speed and we would hope that the BIOS
configures it correctly, it is probably the right solution.

Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/cyrix.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index 3fd7a67bb06..e710a21bb6e 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -134,23 +134,6 @@ static void __cpuinit set_cx86_memwb(void)
 	setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x14);
 }
 
-static void __cpuinit set_cx86_inc(void)
-{
-	unsigned char ccr3;
-
-	printk(KERN_INFO "Enable Incrementor on Cyrix/NSC processor.\n");
-
-	ccr3 = getCx86(CX86_CCR3);
-	setCx86(CX86_CCR3, (ccr3 & 0x0f) | 0x10); /* enable MAPEN */
-	/* PCR1 -- Performance Control */
-	/* Incrementor on, whatever that is */
-	setCx86(CX86_PCR1, getCx86(CX86_PCR1) | 0x02);
-	/* PCR0 -- Performance Control */
-	/* Incrementor Margin 10 */
-	setCx86(CX86_PCR0, getCx86(CX86_PCR0) | 0x04);
-	setCx86(CX86_CCR3, ccr3);	/* disable MAPEN */
-}
-
 /*
  *	Configure later MediaGX and/or Geode processor.
  */
@@ -174,7 +157,6 @@ static void __cpuinit geode_configure(void)
 
 	set_cx86_memwb();
 	set_cx86_reorder();
-	set_cx86_inc();
 
 	local_irq_restore(flags);
 }
-- 
GitLab


From 80c5e73d6028e0f03ab0c70e7c4cbf98ac2e0c43 Mon Sep 17 00:00:00 2001
From: Venki Pallipadi <venkatesh.pallipadi@intel.com>
Date: Tue, 19 Aug 2008 16:28:01 -0700
Subject: [PATCH 199/869] x86: fix Xorg startup/shutdown slowdown with PAT

Rene Herman reported significant Xorg startup/shutdown slowdown due
to PAT. It turns out that the memtype list has thousands of entries.

Add cached_entry to list add routine, in order to speed up the
lookup for sequential reserve_memtype calls.

Reported-by: Rene Herman <rene.herman@keyaccess.nl>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pat.c | 33 +++++++++++++++++++++++++++++++--
 1 file changed, 31 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 2fe30916d4b..bb6e8a267bf 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -207,6 +207,9 @@ static int chk_conflict(struct memtype *new, struct memtype *entry,
 	return -EBUSY;
 }
 
+static struct memtype *cached_entry;
+static u64 cached_start;
+
 /*
  * req_type typically has one of the:
  * - _PAGE_CACHE_WB
@@ -280,11 +283,17 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 
 	spin_lock(&memtype_lock);
 
+	if (cached_entry && start >= cached_start)
+		entry = cached_entry;
+	else
+		entry = list_entry(&memtype_list, struct memtype, nd);
+
 	/* Search for existing mapping that overlaps the current range */
 	where = NULL;
-	list_for_each_entry(entry, &memtype_list, nd) {
+	list_for_each_entry_continue(entry, &memtype_list, nd) {
 		if (end <= entry->start) {
 			where = entry->nd.prev;
+			cached_entry = list_entry(where, struct memtype, nd);
 			break;
 		} else if (start <= entry->start) { /* end > entry->start */
 			err = chk_conflict(new, entry, new_type);
@@ -292,6 +301,8 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
 				where = entry->nd.prev;
+				cached_entry = list_entry(where,
+							struct memtype, nd);
 			}
 			break;
 		} else if (start < entry->end) { /* start > entry->start */
@@ -299,7 +310,20 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 			if (!err) {
 				dprintk("Overlap at 0x%Lx-0x%Lx\n",
 					entry->start, entry->end);
-				where = &entry->nd;
+				cached_entry = list_entry(entry->nd.prev,
+							struct memtype, nd);
+
+				/*
+				 * Move to right position in the linked
+				 * list to add this new entry
+				 */
+				list_for_each_entry_continue(entry,
+							&memtype_list, nd) {
+					if (start <= entry->start) {
+						where = entry->nd.prev;
+						break;
+					}
+				}
 			}
 			break;
 		}
@@ -314,6 +338,8 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type,
 		return err;
 	}
 
+	cached_start = start;
+
 	if (where)
 		list_add(&new->nd, where);
 	else
@@ -343,6 +369,9 @@ int free_memtype(u64 start, u64 end)
 	spin_lock(&memtype_lock);
 	list_for_each_entry(entry, &memtype_list, nd) {
 		if (entry->start == start && entry->end == end) {
+			if (cached_entry == entry || cached_start == start)
+				cached_entry = NULL;
+
 			list_del(&entry->nd);
 			kfree(entry);
 			err = 0;
-- 
GitLab


From 99dd8713306a89f3e106143581244e550e00a644 Mon Sep 17 00:00:00 2001
From: Cliff Wickman <cpw@sgi.com>
Date: Tue, 19 Aug 2008 12:51:59 -0500
Subject: [PATCH 200/869] x86, SGI UV: hardcode the TLB flush interrupt system
 vector

The UV TLB shootdown mechanism needs a system interrupt vector.

Its vector had been hardcoded as 200, but needs to moved to the reserved
system vector range so that it does not collide with some device vector.

This is still temporary until dynamic system IRQ allocation is provided.
But it will be needed when real UV hardware becomes available and runs 2.6.27.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tlb_uv.c      | 3 ++-
 include/asm-x86/irq_vectors.h | 1 +
 include/asm-x86/uv/uv_bau.h   | 5 -----
 3 files changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c
index d0fbb7712ab..8b8c0d6640f 100644
--- a/arch/x86/kernel/tlb_uv.c
+++ b/arch/x86/kernel/tlb_uv.c
@@ -17,6 +17,7 @@
 #include <asm/genapic.h>
 #include <asm/idle.h>
 #include <asm/tsc.h>
+#include <asm/irq_vectors.h>
 
 #include <mach_apic.h>
 
@@ -783,7 +784,7 @@ static int __init uv_bau_init(void)
 		uv_init_blade(blade, node, cur_cpu);
 		cur_cpu += uv_blade_nr_possible_cpus(blade);
 	}
-	set_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
+	alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
 	uv_enable_timeouts();
 
 	return 0;
diff --git a/include/asm-x86/irq_vectors.h b/include/asm-x86/irq_vectors.h
index b95d167b7fb..a48c7f2dbdc 100644
--- a/include/asm-x86/irq_vectors.h
+++ b/include/asm-x86/irq_vectors.h
@@ -76,6 +76,7 @@
 #define CALL_FUNCTION_SINGLE_VECTOR	0xfb
 #define THERMAL_APIC_VECTOR		0xfa
 #define THRESHOLD_APIC_VECTOR		0xf9
+#define UV_BAU_MESSAGE			0xf8
 #define INVALIDATE_TLB_VECTOR_END	0xf7
 #define INVALIDATE_TLB_VECTOR_START	0xf0	/* f0-f7 used for TLB flush */
 
diff --git a/include/asm-x86/uv/uv_bau.h b/include/asm-x86/uv/uv_bau.h
index 91ac0dfb758..610b6b308e9 100644
--- a/include/asm-x86/uv/uv_bau.h
+++ b/include/asm-x86/uv/uv_bau.h
@@ -40,11 +40,6 @@
 #define UV_ACTIVATION_DESCRIPTOR_SIZE	32
 #define UV_DISTRIBUTION_SIZE		256
 #define UV_SW_ACK_NPENDING		8
-#define UV_BAU_MESSAGE			200
-/*
- * Messaging irq; see irq_64.h and include/asm-x86/hw_irq_64.h
- * To be dynamically allocated in the future
- */
 #define UV_NET_ENDPOINT_INTD		0x38
 #define UV_DESC_BASE_PNODE_SHIFT	49
 #define UV_PAYLOADQ_PNODE_SHIFT		49
-- 
GitLab


From 80a8c9fffa78f57d7d4351af2f15a56386805ceb Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Tue, 19 Aug 2008 03:13:38 +0200
Subject: [PATCH 201/869] x86: fix oprofile + hibernation badness

Vegard Nossum reported oprofile + hibernation problems:

> Now some warnings:
>
> ------------[ cut here ]------------
> WARNING: at /uio/arkimedes/s29/vegardno/git-working/linux-2.6/kernel/smp.c:328 s
> mp_call_function_mask+0x194/0x1a0()

The usual problem: the suspend function when interrupts are
already disabled calls smp_call_function which is not allowed with
interrupt off. But at this point all the other CPUs should be already
down anyways, so it should be enough to just drop that.

This patch should fix that problem at least by fixing cpu hotplug&
suspend support.

[ mingo@elte.hu: fixed 5 coding style errors. ]

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/oprofile/nmi_int.c | 39 ++++++++++++++++++++++++++++++++++---
 1 file changed, 36 insertions(+), 3 deletions(-)

diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 3f90289410e..0227694f7da 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -15,6 +15,7 @@
 #include <linux/slab.h>
 #include <linux/moduleparam.h>
 #include <linux/kdebug.h>
+#include <linux/cpu.h>
 #include <asm/nmi.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
@@ -28,23 +29,48 @@ static DEFINE_PER_CPU(unsigned long, saved_lvtpc);
 
 static int nmi_start(void);
 static void nmi_stop(void);
+static void nmi_cpu_start(void *dummy);
+static void nmi_cpu_stop(void *dummy);
 
 /* 0 == registered but off, 1 == registered and on */
 static int nmi_enabled = 0;
 
+#ifdef CONFIG_SMP
+static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action,
+				 void *data)
+{
+	int cpu = (unsigned long)data;
+	switch (action) {
+	case CPU_DOWN_FAILED:
+	case CPU_ONLINE:
+		smp_call_function_single(cpu, nmi_cpu_start, NULL, 0);
+		break;
+	case CPU_DOWN_PREPARE:
+		smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1);
+		break;
+	}
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block oprofile_cpu_nb = {
+	.notifier_call = oprofile_cpu_notifier
+};
+#endif
+
 #ifdef CONFIG_PM
 
 static int nmi_suspend(struct sys_device *dev, pm_message_t state)
 {
+	/* Only one CPU left, just stop that one */
 	if (nmi_enabled == 1)
-		nmi_stop();
+		nmi_cpu_stop(NULL);
 	return 0;
 }
 
 static int nmi_resume(struct sys_device *dev)
 {
 	if (nmi_enabled == 1)
-		nmi_start();
+		nmi_cpu_start(NULL);
 	return 0;
 }
 
@@ -463,6 +489,9 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 	}
 
 	init_sysfs();
+#ifdef CONFIG_SMP
+	register_cpu_notifier(&oprofile_cpu_nb);
+#endif
 	using_nmi = 1;
 	ops->create_files = nmi_create_files;
 	ops->setup = nmi_setup;
@@ -476,6 +505,10 @@ int __init op_nmi_init(struct oprofile_operations *ops)
 
 void op_nmi_exit(void)
 {
-	if (using_nmi)
+	if (using_nmi) {
 		exit_sysfs();
+#ifdef CONFIG_SMP
+		unregister_cpu_notifier(&oprofile_cpu_nb);
+#endif
+	}
 }
-- 
GitLab


From 5f22ca9b13551debea77a407a8d06cd9c6f15238 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 20 Aug 2008 08:31:19 -0700
Subject: [PATCH 202/869] vfat: fix 'sync' mount deadlock due to
 BKL->lock_super conversion

There was another FAT BKL conversion deadlock reported by Bart
Trojanowski due to the BKL being used as a recursive lock by FAT, which
was missed because it only triggers with 'sync' (or 'dirsync') mounts.

The recursion worked for the BKL, but after the conversion to lock_super
(which uses a mutex), it just deadlocks.

Thanks to Bart for debugging this and testing the fix.  The lock
debugging information from the original report:

  =============================================
  [ INFO: possible recursive locking detected ]
  2.6.27-rc3-bisect-00448-ga7f5aaf #16
  ---------------------------------------------
  mv/4020 is trying to acquire lock:
   (&type->s_lock_key#9){--..}, at: [<c01a90fe>] lock_super+0x1e/0x20

  but task is already holding lock:
   (&type->s_lock_key#9){--..}, at: [<c01a90fe>] lock_super+0x1e/0x20

  other info that might help us debug this:
  3 locks held by mv/4020:
   #0:  (&sb->s_type->i_mutex_key#9/1){--..}, at: [<c01b2336>] do_unlinkat+0x66/0x140
   #1:  (&sb->s_type->i_mutex_key#9){--..}, at: [<c01b0954>] vfs_unlink+0x84/0x110
   #2:  (&type->s_lock_key#9){--..}, at: [<c01a90fe>] lock_super+0x1e/0x20

  stack backtrace:
  Pid: 4020, comm: mv Not tainted 2.6.27-rc3-bisect-00448-ga7f5aaf #16
   [<c014e694>] validate_chain+0x984/0xea0
   [<c0108d70>] ? native_sched_clock+0x0/0xf0
   [<c014ee9c>] __lock_acquire+0x2ec/0x9b0
   [<c014f5cf>] lock_acquire+0x6f/0x90
   [<c01a90fe>] ? lock_super+0x1e/0x20
   [<c044e5fd>] mutex_lock_nested+0xad/0x300
   [<c01a90fe>] ? lock_super+0x1e/0x20
   [<c01a90fe>] ? lock_super+0x1e/0x20
   [<c01a90fe>] lock_super+0x1e/0x20
   [<f8b3a700>] fat_write_inode+0x60/0x2b0 [fat]
   [<c0450878>] ? _spin_unlock_irqrestore+0x48/0x80
   [<f8b3a953>] ? fat_sync_inode+0x3/0x20 [fat]
   [<f8b3a962>] fat_sync_inode+0x12/0x20 [fat]
   [<f8b37c7e>] fat_remove_entries+0xbe/0x120 [fat]
   [<f8b422ef>] vfat_unlink+0x5f/0x90 [vfat]
   [<f8b42290>] ? vfat_unlink+0x0/0x90 [vfat]
   [<c01b0968>] vfs_unlink+0x98/0x110
   [<c01b2400>] do_unlinkat+0x130/0x140
   [<c016a8f5>] ? audit_syscall_entry+0x105/0x150
   [<c01b253b>] sys_unlinkat+0x3b/0x40
   [<c01040d3>] sysenter_do_call+0x12/0x3f
   =======================

where the deadlock is due to the nesting of lock_super from vfat_unlink
to fat_write_inode:

 - do_unlinkat
   - vfs_unlink
     - vfat_unlink
       * lock_super
       - fat_remove_entries
         - fat_sync_inode
           - fat_write_inode
             * lock_super

and the fix is to simply remove the use of lock_super() in fat_write_inode.

The lock_super() there had been just an automatic conversion of the
kernel lock to the superblock lock, but no locking was actually needed
there, since the code in fat_write_inode already protected all relevant
accesses with a spinlock (sbi->inode_hash_lock to be exact).  The only
code inside the BKL (and thus the superblock lock) was accesses tp local
variables or calls to functions that have long been SMP-safe (i.e.
sb_bread, mark_buffe_dirty and brlese).

Bart reports:
 "Looks good.  I ran 10 parallel processes creating 1M files truncating
  them, writing to them again and then deleting them.  This patch fixes
  the issue I ran into.

  Signed-off-by: Bart Trojanowski <bart@jukie.net>"

Reported-and-tested-by: Bart Trojanowski <bart@jukie.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/fat/inode.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 6d266d793e2..80ff3381fa2 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -562,26 +562,23 @@ static int fat_write_inode(struct inode *inode, int wait)
 	struct buffer_head *bh;
 	struct msdos_dir_entry *raw_entry;
 	loff_t i_pos;
-	int err = 0;
+	int err;
 
 retry:
 	i_pos = MSDOS_I(inode)->i_pos;
 	if (inode->i_ino == MSDOS_ROOT_INO || !i_pos)
 		return 0;
 
-	lock_super(sb);
 	bh = sb_bread(sb, i_pos >> sbi->dir_per_block_bits);
 	if (!bh) {
 		printk(KERN_ERR "FAT: unable to read inode block "
 		       "for updating (i_pos %lld)\n", i_pos);
-		err = -EIO;
-		goto out;
+		return -EIO;
 	}
 	spin_lock(&sbi->inode_hash_lock);
 	if (i_pos != MSDOS_I(inode)->i_pos) {
 		spin_unlock(&sbi->inode_hash_lock);
 		brelse(bh);
-		unlock_super(sb);
 		goto retry;
 	}
 
@@ -607,11 +604,10 @@ retry:
 	}
 	spin_unlock(&sbi->inode_hash_lock);
 	mark_buffer_dirty(bh);
+	err = 0;
 	if (wait)
 		err = sync_dirty_buffer(bh);
 	brelse(bh);
-out:
-	unlock_super(sb);
 	return err;
 }
 
-- 
GitLab


From e2cb96b7ecba46888cf00252ffdb8ef1e92c4258 Mon Sep 17 00:00:00 2001
From: Christoph Lameter <cl@linux-foundation.org>
Date: Tue, 19 Aug 2008 08:51:22 -0500
Subject: [PATCH 203/869] slub: Disable NUMA remote node defragmentation by
 default

Switch remote node defragmentation off by default. The current settings can
cause excessive node local allocations with hackbench:

  SLAB:

    % cat /proc/meminfo
    MemTotal:        7701760 kB
    MemFree:         5940096 kB
    Slab:             123840 kB

  SLUB:

    % cat /proc/meminfo
    MemTotal:        7701376 kB
    MemFree:         4740928 kB
    Slab:            1591680 kB

[Note: this feature is not related to slab defragmentation.]

You can find the original discussion here:

  http://lkml.org/lkml/2008/8/4/308

Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
---
 mm/slub.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/mm/slub.c b/mm/slub.c
index 4f5b9614945..fb486d5540f 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2312,7 +2312,7 @@ static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags,
 
 	s->refcount = 1;
 #ifdef CONFIG_NUMA
-	s->remote_node_defrag_ratio = 100;
+	s->remote_node_defrag_ratio = 1000;
 #endif
 	if (!init_kmem_cache_nodes(s, gfpflags & ~SLUB_DMA))
 		goto error;
@@ -4058,7 +4058,7 @@ static ssize_t remote_node_defrag_ratio_store(struct kmem_cache *s,
 	if (err)
 		return err;
 
-	if (ratio < 100)
+	if (ratio <= 100)
 		s->remote_node_defrag_ratio = ratio * 10;
 
 	return length;
-- 
GitLab


From 1c8e40e4064d51ec50258c4d381eb832c0b231db Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Wed, 20 Aug 2008 14:44:45 +0100
Subject: [PATCH 204/869] Reduce brokenness of CRIS headers_install

I won't say 'fix', because they still look broken, although this will at
least allow 'make ARCH=CRIS headers_install' to _complete_.

For headers which are exported, we should probably choose between
asm/arch-v10 and asm/arch-v32 by something that GCC defines -- we can't
rely on a generated symlink. And we certainly can't export an arch/
directory which doesn't even exist.

And the only thing that we seem to include from the arch/ directory is
<asm/arch/ptrace.h> from <asm/ptrace.h> ... and that isn't exported in
either arch-v10 or arch-v32 _anyway_.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-cris/Kbuild | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/asm-cris/Kbuild b/include/asm-cris/Kbuild
index b7037d80d46..d5b631935ec 100644
--- a/include/asm-cris/Kbuild
+++ b/include/asm-cris/Kbuild
@@ -1,6 +1,5 @@
 include include/asm-generic/Kbuild.asm
 
-header-y += arch/
 header-y += arch-v10/
 header-y += arch-v32/
 
-- 
GitLab


From e4464facd6f1404c2baeb6798d71e34423e7aeaa Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Wed, 20 Aug 2008 14:58:23 +0100
Subject: [PATCH 205/869] Reserve NFS fileid values for btrfs

Purely cosmetic for now, but we might as well get it merged ASAP.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/exportfs.h | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/include/linux/exportfs.h b/include/linux/exportfs.h
index f5abd130663..27e772cefb6 100644
--- a/include/linux/exportfs.h
+++ b/include/linux/exportfs.h
@@ -34,6 +34,27 @@ enum fid_type {
 	 */
 	FILEID_INO32_GEN_PARENT = 2,
 
+	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number.
+	 */
+	FILEID_BTRFS_WITHOUT_PARENT = 0x4d,
+
+	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number,
+	 * 64 bit parent object ID, 32 bit parent generation.
+	 */
+	FILEID_BTRFS_WITH_PARENT = 0x4e,
+
+	/*
+	 * 64 bit object ID, 64 bit root object ID,
+	 * 32 bit generation number,
+	 * 64 bit parent object ID, 32 bit parent generation,
+	 * 64 bit parent root object ID.
+	 */
+	FILEID_BTRFS_WITH_PARENT_ROOT = 0x4f,
+
 	/*
 	 * 32 bit block number, 16 bit partition reference,
 	 * 16 bit unused, 32 bit generation number.
-- 
GitLab


From 449f76506f76051839dfa945c59881c17509cfbf Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 20 Aug 2008 15:53:33 +0100
Subject: [PATCH 206/869] MN10300: Supply ioremap_wc() for MN10300

Supply ioremap_wc() for MN10300.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-mn10300/io.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/asm-mn10300/io.h b/include/asm-mn10300/io.h
index b8b6dc87825..c1a4119e649 100644
--- a/include/asm-mn10300/io.h
+++ b/include/asm-mn10300/io.h
@@ -259,6 +259,8 @@ static inline void *ioremap_nocache(unsigned long offset, unsigned long size)
 	return (void *) (offset | 0x20000000);
 }
 
+#define ioremap_wc ioremap_nocache
+
 static inline void iounmap(void *addr)
 {
 }
-- 
GitLab


From 0c7281c0faa1d0bdbdc647430cbdf7e0aed7f385 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Wed, 20 Aug 2008 16:04:22 +0100
Subject: [PATCH 207/869] FRV: Provide ioremap_wc() for FRV

Provide ioremap_wc() for FRV.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-frv/io.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/asm-frv/io.h b/include/asm-frv/io.h
index 20e44fe00ab..ca7475e73b5 100644
--- a/include/asm-frv/io.h
+++ b/include/asm-frv/io.h
@@ -271,6 +271,8 @@ static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned l
 	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
 }
 
+#define ioremap_wc ioremap_nocache
+
 extern void iounmap(void volatile __iomem *addr);
 
 static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-- 
GitLab


From 55d8460c921ed725f5bf46c826a6bddbe8a75c46 Mon Sep 17 00:00:00 2001
From: Mike Rapoport <mike@compulab.co.il>
Date: Wed, 20 Aug 2008 06:10:06 +0100
Subject: [PATCH 208/869] [ARM] 5212/1: pxa: fix build error when CPU_PXA310 is
 not defined

Fix
arch/arm/mach-pxa/pxa300.c:94: error: 'CKEN_MMC3' undeclared here (not in a function)
when building for PXA300.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/pxa300.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 494fc1f032d..9adc7fc4618 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -90,7 +90,9 @@ static struct clk common_clks[] = {
 };
 
 static struct clk pxa310_clks[] = {
+#ifdef CONFIG_CPU_PXA310
 	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+#endif
 };
 
 static int __init pxa300_init(void)
-- 
GitLab


From f14413184b1de4dcbd5ec3e7c129c3ce2079f543 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Wed, 20 Aug 2008 14:08:57 -0700
Subject: [PATCH 209/869] eeepc-laptop: fix use after free

eeepc-laptop uses the hwmon struct after unregistering the device, causing
an oops on module unload.  Flip the ordering to fix.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Karol Kozimor <sziwan@users.sourceforge.net>
Cc: <stable@kernel.org>		[2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/eeepc-laptop.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/eeepc-laptop.c b/drivers/misc/eeepc-laptop.c
index 9e8d79e7e9f..facdb9893c8 100644
--- a/drivers/misc/eeepc-laptop.c
+++ b/drivers/misc/eeepc-laptop.c
@@ -553,9 +553,9 @@ static void eeepc_hwmon_exit(void)
 	hwmon = eeepc_hwmon_device;
 	if (!hwmon)
 		return ;
-	hwmon_device_unregister(hwmon);
 	sysfs_remove_group(&hwmon->kobj,
 			   &hwmon_attribute_group);
+	hwmon_device_unregister(hwmon);
 	eeepc_hwmon_device = NULL;
 }
 
-- 
GitLab


From 35fc908dc0e7ab0002ef18787886cc1340028020 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 20 Aug 2008 14:08:58 -0700
Subject: [PATCH 210/869] documentation: describe bootmem_debug kernel
 parameter

"bootmem_debug" is not mentioned in kernel-parameters.txt. Recently I
had to use that kernel option and I think it should be documented.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/kernel-parameters.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e7bea3e8530..a8976467a98 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -365,6 +365,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			no delay (0).
 			Format: integer
 
+	bootmem_debug	[KNL] Enable bootmem allocator debug messages.
+
 	bttv.card=	[HW,V4L] bttv (bt848 + bt878 based grabber cards)
 	bttv.radio=	Most important insmod options are available as
 			kernel args too.
-- 
GitLab


From 1804dc6e145f3f24a8c94deddfc0a986d380a27f Mon Sep 17 00:00:00 2001
From: Clement Calmels <cboulte@gmail.com>
Date: Wed, 20 Aug 2008 14:09:00 -0700
Subject: [PATCH 211/869] /proc/self/maps doesn't display the real file offset

This addresses

	http://bugzilla.kernel.org/show_bug.cgi?id=11318

In function show_map (file: fs/proc/task_mmu.c), if vma->vm_pgoff > 2^20
than (vma->vm_pgoff << PAGE_SIZE) is greater than 2^32 (with PAGE_SIZE
equal to 4096 (i.e.  2^12).  The next seq_printf use an unsigned long for
the conversion of (vma->vm_pgoff << PAGE_SIZE), as a result the offset
value displayed in /proc/self/maps is truncated if the page offset is
greater than 2^20.

A test that shows this issue:

#define _GNU_SOURCE
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/mman.h>
#include <stdlib.h>
#include <stdio.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>

#define PAGE_SIZE (getpagesize())

#if __i386__
#   define U64_STR "%llx"
#elif __x86_64
#   define U64_STR "%lx"
#else
#   error "Architecture Unsupported"
#endif

int main(int argc, char *argv[])
{
	int fd;
	char *addr;
	off64_t offset = 0x10000000;
	char *filename = "/dev/zero";

	fd = open(filename, O_RDONLY);
	if (fd < 0) {
		perror("open");
		return 1;
	}

	offset *= 0x10;
	printf("offset = " U64_STR "\n", offset);

	addr = (char*)mmap64(NULL, PAGE_SIZE, PROT_READ, MAP_PRIVATE, fd,
			     offset);
	if ((void*)addr == MAP_FAILED) {
		perror("mmap64");
		return 1;
	}

	{
		FILE *fmaps;
		char *line = NULL;
		size_t len = 0;
		ssize_t read;
		size_t filename_len = strlen(filename);

		fmaps = fopen("/proc/self/maps", "r");
		if (!fmaps) {
			perror("fopen");
			return 1;
		}
		while ((read = getline(&line, &len, fmaps)) != -1) {
			if ((read > filename_len + 1)
			    && (strncmp(&line[read - filename_len - 1], filename, filename_len) == 0))
				printf("%s", line);
		}

		if (line)
			free(line);

		fclose(fmaps);
	}

	close(fd);
	return 0;
}

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Clement Calmels <cboulte@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/nommu.c    | 4 ++--
 fs/proc/task_mmu.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/proc/nommu.c b/fs/proc/nommu.c
index 79ecd281d2c..3f87d263294 100644
--- a/fs/proc/nommu.c
+++ b/fs/proc/nommu.c
@@ -52,14 +52,14 @@ int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma)
 	}
 
 	seq_printf(m,
-		   "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+		   "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
 		   vma->vm_start,
 		   vma->vm_end,
 		   flags & VM_READ ? 'r' : '-',
 		   flags & VM_WRITE ? 'w' : '-',
 		   flags & VM_EXEC ? 'x' : '-',
 		   flags & VM_MAYSHARE ? flags & VM_SHARED ? 'S' : 's' : 'p',
-		   vma->vm_pgoff << PAGE_SHIFT,
+		   ((loff_t)vma->vm_pgoff) << PAGE_SHIFT,
 		   MAJOR(dev), MINOR(dev), ino, &len);
 
 	if (file) {
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 7546a918f79..73d1891ee62 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -219,14 +219,14 @@ static int show_map(struct seq_file *m, void *v)
 		ino = inode->i_ino;
 	}
 
-	seq_printf(m, "%08lx-%08lx %c%c%c%c %08lx %02x:%02x %lu %n",
+	seq_printf(m, "%08lx-%08lx %c%c%c%c %08llx %02x:%02x %lu %n",
 			vma->vm_start,
 			vma->vm_end,
 			flags & VM_READ ? 'r' : '-',
 			flags & VM_WRITE ? 'w' : '-',
 			flags & VM_EXEC ? 'x' : '-',
 			flags & VM_MAYSHARE ? 's' : 'p',
-			vma->vm_pgoff << PAGE_SHIFT,
+			((loff_t)vma->vm_pgoff) << PAGE_SHIFT,
 			MAJOR(dev), MINOR(dev), ino, &len);
 
 	/*
-- 
GitLab


From fe2e1cf83a46c879a66ec5146ba7a09a6aef0a5c Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Wed, 20 Aug 2008 14:09:01 -0700
Subject: [PATCH 212/869] Blackfin RTC Driver: move irq request/free out of
 open/release and into probe/remove so that the non-dev interfaces (like
 sysfs) work as expected

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-bfin.c | 51 +++++++++++++++++-------------------------
 1 file changed, 20 insertions(+), 31 deletions(-)

diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index a1af4c27939..51741dc1291 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -218,26 +218,6 @@ static irqreturn_t bfin_rtc_interrupt(int irq, void *dev_id)
 		return IRQ_NONE;
 }
 
-static int bfin_rtc_open(struct device *dev)
-{
-	int ret;
-
-	dev_dbg_stamp(dev);
-
-	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, to_platform_device(dev)->name, dev);
-	if (!ret)
-		bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
-
-	return ret;
-}
-
-static void bfin_rtc_release(struct device *dev)
-{
-	dev_dbg_stamp(dev);
-	bfin_rtc_reset(dev, 0);
-	free_irq(IRQ_RTC, dev);
-}
-
 static void bfin_rtc_int_set(u16 rtc_int)
 {
 	bfin_write_RTC_ISTAT(rtc_int);
@@ -370,8 +350,6 @@ static int bfin_rtc_proc(struct device *dev, struct seq_file *seq)
 }
 
 static struct rtc_class_ops bfin_rtc_ops = {
-	.open          = bfin_rtc_open,
-	.release       = bfin_rtc_release,
 	.ioctl         = bfin_rtc_ioctl,
 	.read_time     = bfin_rtc_read_time,
 	.set_time      = bfin_rtc_set_time,
@@ -383,29 +361,37 @@ static struct rtc_class_ops bfin_rtc_ops = {
 static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 {
 	struct bfin_rtc *rtc;
+	struct device *dev = &pdev->dev;
 	int ret = 0;
 
-	dev_dbg_stamp(&pdev->dev);
+	dev_dbg_stamp(dev);
 
+	/* Allocate memory for our RTC struct */
 	rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
 	if (unlikely(!rtc))
 		return -ENOMEM;
+	platform_set_drvdata(pdev, rtc);
 
-	rtc->rtc_dev = rtc_device_register(pdev->name, &pdev->dev, &bfin_rtc_ops, THIS_MODULE);
-	if (IS_ERR(rtc)) {
-		ret = PTR_ERR(rtc->rtc_dev);
+	/* Grab the IRQ and init the hardware */
+	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
+	if (unlikely(ret))
 		goto err;
-	}
-
-	/* see comment at top of file about stopwatch/PIE */
+	bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
 	bfin_write_RTC_SWCNT(0);
 
-	platform_set_drvdata(pdev, rtc);
+	/* Register our RTC with the RTC framework */
+	rtc->rtc_dev = rtc_device_register(pdev->name, dev, &bfin_rtc_ops, THIS_MODULE);
+	if (unlikely(IS_ERR(rtc))) {
+		ret = PTR_ERR(rtc->rtc_dev);
+		goto err_irq;
+	}
 
-	device_init_wakeup(&pdev->dev, 1);
+	device_init_wakeup(dev, 1);
 
 	return 0;
 
+ err_irq:
+	free_irq(IRQ_RTC, dev);
  err:
 	kfree(rtc);
 	return ret;
@@ -414,7 +400,10 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 static int __devexit bfin_rtc_remove(struct platform_device *pdev)
 {
 	struct bfin_rtc *rtc = platform_get_drvdata(pdev);
+	struct device *dev = &pdev->dev;
 
+	bfin_rtc_reset(dev, 0);
+	free_irq(IRQ_RTC, dev);
 	rtc_device_unregister(rtc->rtc_dev);
 	platform_set_drvdata(pdev, NULL);
 	kfree(rtc);
-- 
GitLab


From 8c9166f7a60b67909632ea60a032c18d84ed8af0 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Wed, 20 Aug 2008 14:09:02 -0700
Subject: [PATCH 213/869] Blackfin RTC Driver: do all initialization before we
 register the rtc and make it available

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-bfin.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 51741dc1291..9d2da1cd777 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -371,6 +371,7 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 	if (unlikely(!rtc))
 		return -ENOMEM;
 	platform_set_drvdata(pdev, rtc);
+	device_init_wakeup(dev, 1);
 
 	/* Grab the IRQ and init the hardware */
 	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
@@ -386,8 +387,6 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 		goto err_irq;
 	}
 
-	device_init_wakeup(dev, 1);
-
 	return 0;
 
  err_irq:
-- 
GitLab


From 7f60459921bd24e86b21e07c42244c510b4f46b2 Mon Sep 17 00:00:00 2001
From: Graf Yang <graf.yang@analog.com>
Date: Wed, 20 Aug 2008 14:09:02 -0700
Subject: [PATCH 214/869] Blackfin RTC Driver: BF561 not have on-chip RTC

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 90ab7382540..9a9755c92fa 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -561,7 +561,7 @@ config RTC_DRV_AT91SAM9_GPBR
 
 config RTC_DRV_BFIN
 	tristate "Blackfin On-Chip RTC"
-	depends on BLACKFIN
+	depends on BLACKFIN && !BF561
 	help
 	  If you say yes here you will get support for the
 	  Blackfin On-Chip Real Time Clock.
-- 
GitLab


From d0fd93781c49cbe127f9e7a5b402e9b167c105a6 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Wed, 20 Aug 2008 14:09:03 -0700
Subject: [PATCH 215/869] Blackfin RTC Driver: dont let RTC programming in
 bootloaders randomly cause ~5 second boot delays

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-bfin.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index 9d2da1cd777..34439ce3967 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -363,6 +363,7 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 	struct bfin_rtc *rtc;
 	struct device *dev = &pdev->dev;
 	int ret = 0;
+	unsigned long timeout;
 
 	dev_dbg_stamp(dev);
 
@@ -377,6 +378,13 @@ static int __devinit bfin_rtc_probe(struct platform_device *pdev)
 	ret = request_irq(IRQ_RTC, bfin_rtc_interrupt, IRQF_SHARED, pdev->name, dev);
 	if (unlikely(ret))
 		goto err;
+	/* sometimes the bootloader touched things, but the write complete was not
+	 * enabled, so let's just do a quick timeout here since the IRQ will not fire ...
+	 */
+	timeout = jiffies + HZ;
+	while (bfin_read_RTC_ISTAT() & RTC_ISTAT_WRITE_PENDING)
+		if (time_after(jiffies, timeout))
+			break;
 	bfin_rtc_reset(dev, RTC_ISTAT_WRITE_COMPLETE);
 	bfin_write_RTC_SWCNT(0);
 
-- 
GitLab


From 16f8c5b2e64dec7faa5d3c7e9bdf0765e864e481 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Wed, 20 Aug 2008 14:09:04 -0700
Subject: [PATCH 216/869] mm: page_remove_rmap comments on PageAnon

Add a comment to s390's page_test_dirty/page_clear_dirty/page_set_dirty
dance in page_remove_rmap(): I was wrong to think the PageSwapCache test
could be avoided, and would like a comment in there to remind me.  And
mention s390, to help us remember that this block is not really common.

Also move down the "It would be tidy to reset PageAnon" comment: it does
not belong to s390's block, and it would be unwise to reset PageAnon
before we're done with testing it.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/rmap.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/mm/rmap.c b/mm/rmap.c
index 1ea4e6fcee7..059774712c0 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -659,23 +659,30 @@ void page_remove_rmap(struct page *page, struct vm_area_struct *vma)
 		}
 
 		/*
-		 * It would be tidy to reset the PageAnon mapping here,
-		 * but that might overwrite a racing page_add_anon_rmap
-		 * which increments mapcount after us but sets mapping
-		 * before us: so leave the reset to free_hot_cold_page,
-		 * and remember that it's only reliable while mapped.
-		 * Leaving it set also helps swapoff to reinstate ptes
-		 * faster for those pages still in swapcache.
+		 * Now that the last pte has gone, s390 must transfer dirty
+		 * flag from storage key to struct page.  We can usually skip
+		 * this if the page is anon, so about to be freed; but perhaps
+		 * not if it's in swapcache - there might be another pte slot
+		 * containing the swap entry, but page not yet written to swap.
 		 */
 		if ((!PageAnon(page) || PageSwapCache(page)) &&
 		    page_test_dirty(page)) {
 			page_clear_dirty(page);
 			set_page_dirty(page);
 		}
-		mem_cgroup_uncharge_page(page);
 
+		mem_cgroup_uncharge_page(page);
 		__dec_zone_page_state(page,
-				PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
+			PageAnon(page) ? NR_ANON_PAGES : NR_FILE_MAPPED);
+		/*
+		 * It would be tidy to reset the PageAnon mapping here,
+		 * but that might overwrite a racing page_add_anon_rmap
+		 * which increments mapcount after us but sets mapping
+		 * before us: so leave the reset to free_hot_cold_page,
+		 * and remember that it's only reliable while mapped.
+		 * Leaving it set also helps swapoff to reinstate ptes
+		 * faster for those pages still in swapcache.
+		 */
 	}
 }
 
-- 
GitLab


From 07279cdfd964acc032de92a527cb11b1f40f35aa Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Wed, 20 Aug 2008 14:09:05 -0700
Subject: [PATCH 217/869] mm: show free swap as signed

Adjust <Alt><SysRq>m show_swap_cache_info() to show "Free swap" as a
signed long: the signed format is preferable, because during swapoff
nr_swap_pages can legitimately go negative, so makes more sense thus
(it used to be shown redundantly, once as signed and once as unsigned).

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/swap_state.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/swap_state.c b/mm/swap_state.c
index 167cf2dc8a0..797c3831cbe 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -60,7 +60,7 @@ void show_swap_cache_info(void)
 	printk("Swap cache stats: add %lu, delete %lu, find %lu/%lu\n",
 		swap_cache_info.add_total, swap_cache_info.del_total,
 		swap_cache_info.find_success, swap_cache_info.find_total);
-	printk("Free swap  = %lukB\n", nr_swap_pages << (PAGE_SHIFT - 10));
+	printk("Free swap  = %ldkB\n", nr_swap_pages << (PAGE_SHIFT - 10));
 	printk("Total swap = %lukB\n", total_swap_pages << (PAGE_SHIFT - 10));
 }
 
-- 
GitLab


From 759f9a2df78d2156a2675edc7999fb4c919a3159 Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Wed, 20 Aug 2008 14:09:06 -0700
Subject: [PATCH 218/869] mm: mminit_loglevel cannot be __meminitdata anymore

mminit_loglevel is now used from mminit_verify_zonelist <- build_all_zonelists <-

1. online_pages <- memory_block_action <- memory_block_change_state <- store_mem_state (sys handler)
2. numa_zonelist_order_handler (proc handler)

so it cannot be annotated __meminit - drop it

fixes following section mismatch warning:
WARNING: vmlinux.o(.text+0x71628): Section mismatch in reference from the function mminit_verify_zonelist() to the variable .meminit.data:mminit_loglevel
The function mminit_verify_zonelist() references
the variable __meminitdata mminit_loglevel.
This is often because mminit_verify_zonelist lacks a __meminitdata
annotation or the annotation of mminit_loglevel is wrong.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/mm_init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/mm_init.c b/mm/mm_init.c
index 936ef2efd89..4e0e26591df 100644
--- a/mm/mm_init.c
+++ b/mm/mm_init.c
@@ -12,7 +12,7 @@
 #include "internal.h"
 
 #ifdef CONFIG_DEBUG_MEMORY_INIT
-int __meminitdata mminit_loglevel;
+int mminit_loglevel;
 
 #ifndef SECTIONS_SHIFT
 #define SECTIONS_SHIFT	0
-- 
GitLab


From f3944d61ddc65722539ffd7b6f5b7c7217c136cc Mon Sep 17 00:00:00 2001
From: Sven Wegener <sven.wegener@stealer.net>
Date: Wed, 20 Aug 2008 14:09:07 -0700
Subject: [PATCH 219/869] nbd: fix memory leak of nbd_dev array

We leak the memory allocated for the nbd_dev array at multiple places.
Fix them by either adding a kfree() or by rearranging code to return
before we allocate the memory.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Cc: Paul Clements <paul.clements@steeleye.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/block/nbd.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index ad98dda6037..1778e4a2c67 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -707,15 +707,15 @@ static int __init nbd_init(void)
 
 	BUILD_BUG_ON(sizeof(struct nbd_request) != 28);
 
-	nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
-	if (!nbd_dev)
-		return -ENOMEM;
-
 	if (max_part < 0) {
 		printk(KERN_CRIT "nbd: max_part must be >= 0\n");
 		return -EINVAL;
 	}
 
+	nbd_dev = kcalloc(nbds_max, sizeof(*nbd_dev), GFP_KERNEL);
+	if (!nbd_dev)
+		return -ENOMEM;
+
 	part_shift = 0;
 	if (max_part > 0)
 		part_shift = fls(max_part);
@@ -779,6 +779,7 @@ out:
 		blk_cleanup_queue(nbd_dev[i].disk->queue);
 		put_disk(nbd_dev[i].disk);
 	}
+	kfree(nbd_dev);
 	return err;
 }
 
@@ -795,6 +796,7 @@ static void __exit nbd_cleanup(void)
 		}
 	}
 	unregister_blkdev(NBD_MAJOR, "nbd");
+	kfree(nbd_dev);
 	printk(KERN_INFO "nbd: unregistered device at major %d\n", NBD_MAJOR);
 }
 
-- 
GitLab


From c82f2966015a2c9708fb8f20694ef7ba8567d2e1 Mon Sep 17 00:00:00 2001
From: Akinobu Mita <akinobu.mita@gmail.com>
Date: Wed, 20 Aug 2008 14:09:09 -0700
Subject: [PATCH 220/869] brd: fix name argument of unregister_blkdev()

The name of brd block device is "ramdisk", it's not "brd".
(The block device is registered by register_blkdev(RAMDISK_MAJOR, "ramdisk")
So it should be unregistered by unregister_blkdev(RAMDISK_MAJOR, "ramdisk")

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/block/brd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 24b97b0bef9..d070d492e38 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -571,8 +571,8 @@ out_free:
 		list_del(&brd->brd_list);
 		brd_free(brd);
 	}
+	unregister_blkdev(RAMDISK_MAJOR, "ramdisk");
 
-	unregister_blkdev(RAMDISK_MAJOR, "brd");
 	return -ENOMEM;
 }
 
-- 
GitLab


From ff9bc512f198eb47204f55b24c6fe3d36ed89592 Mon Sep 17 00:00:00 2001
From: Pavel Emelyanov <xemul@openvz.org>
Date: Wed, 20 Aug 2008 14:09:10 -0700
Subject: [PATCH 221/869] binfmt_misc: fix false -ENOEXEC when coupled with
 other binary handlers

In case the binfmt_misc binary handler is registered *before* the e.g.
script one (when for example being compiled as a module) the following
situation may occur:

1. user launches a script, whose interpreter is a misc binary;
2. the load_misc_binary sets the misc_bang and returns -ENOEVEC,
   since the binary is a script;
3. the load_script_binary loads one and calls for search_binary_hander
   to run the interpreter;
4. the load_misc_binary is called again, but refuses to load the
   binary due to misc_bang bit set.

The fix is to move the misc_bang setting lower - prior to the actual
call to the search_binary_handler.

Caused by the commit 3a2e7f47 (binfmt_misc.c: avoid potential kernel
stack overflow)

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: <stable@kernel.org>		[2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/binfmt_misc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/binfmt_misc.c b/fs/binfmt_misc.c
index 756205314c2..8d7e88e02e0 100644
--- a/fs/binfmt_misc.c
+++ b/fs/binfmt_misc.c
@@ -120,8 +120,6 @@ static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	if (bprm->misc_bang)
 		goto _ret;
 
-	bprm->misc_bang = 1;
-
 	/* to keep locking time low, we copy the interpreter string */
 	read_lock(&entries_lock);
 	fmt = check_file(bprm);
@@ -199,6 +197,8 @@ static int load_misc_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	if (retval < 0)
 		goto _error;
 
+	bprm->misc_bang = 1;
+
 	retval = search_binary_handler (bprm, regs);
 	if (retval < 0)
 		goto _error;
-- 
GitLab


From 1d96469a34781340b2cc9bdf97d5913eecdaa038 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Wed, 20 Aug 2008 14:09:11 -0700
Subject: [PATCH 222/869] rtc: fix double lock on UIE emulation

With commit 5ad31a575157147b43fa84ef1e21471661653878 ("rtc: remove BKL
for ioctl()"), RTC_UIE_ON ioctl cause double lock on rtc->ops_lock.
The ops_lock must not be held while set_uie() calls rtc_read_time()
which takes the lock.  Also clear_uie() does not need ops_lock.  This
patch fixes return value of RTC_UIE_OFF ioctl too.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: David Brownell <david-b@pacbell.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-dev.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-dev.c b/drivers/rtc/rtc-dev.c
index 35dcc06eb3e..f118252f3a9 100644
--- a/drivers/rtc/rtc-dev.c
+++ b/drivers/rtc/rtc-dev.c
@@ -403,11 +403,14 @@ static long rtc_dev_ioctl(struct file *file,
 
 #ifdef CONFIG_RTC_INTF_DEV_UIE_EMUL
 	case RTC_UIE_OFF:
+		mutex_unlock(&rtc->ops_lock);
 		clear_uie(rtc);
-		break;
+		return 0;
 
 	case RTC_UIE_ON:
+		mutex_unlock(&rtc->ops_lock);
 		err = set_uie(rtc);
+		return err;
 #endif
 	default:
 		err = -ENOTTY;
-- 
GitLab


From 27aa069a8850a36b8aef0160e73cfd928c6bbcc4 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Wed, 20 Aug 2008 14:09:11 -0700
Subject: [PATCH 223/869] pm2fb: free cmap memory on module remove

Release cmap memory allocated in the probe function.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/pm2fb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/video/pm2fb.c b/drivers/video/pm2fb.c
index 3f1ca2adda3..c6dd924976a 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/pm2fb.c
@@ -1746,6 +1746,7 @@ static void __devexit pm2fb_remove(struct pci_dev *pdev)
 	release_mem_region(fix->mmio_start, fix->mmio_len);
 
 	pci_set_drvdata(pdev, NULL);
+	fb_dealloc_cmap(&info->cmap);
 	kfree(info->pixmap.addr);
 	kfree(info);
 }
-- 
GitLab


From a09f48551273ee89d4e9ae37474807dc2da1d757 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Wed, 20 Aug 2008 14:09:14 -0700
Subject: [PATCH 224/869] drivers/char/ipmi/ipmi_si_intf.c:default_find_bmc():
 fix leak

If check_legacy_ioport() returns true, we leak *info.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11362

Reported-by: Daniel Marjamki <danielm77@spray.se>
Cc: Christian Krafft <krafft@de.ibm.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Corey Minyard <minyard@acm.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/ipmi/ipmi_si_intf.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index f52931e1c16..8e8afb6141f 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2695,15 +2695,13 @@ static __devinit void default_find_bmc(void)
 	for (i = 0; ; i++) {
 		if (!ipmi_defaults[i].port)
 			break;
-
-		info = kzalloc(sizeof(*info), GFP_KERNEL);
-		if (!info)
-			return;
-
 #ifdef CONFIG_PPC_MERGE
 		if (check_legacy_ioport(ipmi_defaults[i].port))
 			continue;
 #endif
+		info = kzalloc(sizeof(*info), GFP_KERNEL);
+		if (!info)
+			return;
 
 		info->addr_source = NULL;
 
-- 
GitLab


From 481ebd0d76b501c5772f702ae31e55350c0858a3 Mon Sep 17 00:00:00 2001
From: Johannes Weiner <hannes@saeurebad.de>
Date: Wed, 20 Aug 2008 14:09:15 -0700
Subject: [PATCH 225/869] bootmem: fix aligning of node-relative indexes and
 offsets

Absolute alignment requirements may never be applied to node-relative
offsets.  Andreas Herrmann spotted this flaw when a bootmem allocation on
an unaligned node was itself not aligned because the combination of an
unaligned node with an aligned offset into that node is not garuanteed to
be aligned itself.

This patch introduces two helper functions that align a node-relative
index or offset with respect to the node's starting address so that the
absolute PFN or virtual address that results from combining the two
satisfies the requested alignment.

Then all the broken ALIGN()s in alloc_bootmem_core() are replaced by these
helpers.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Reported-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Debugged-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Reviewed-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/bootmem.c | 35 +++++++++++++++++++++++++++++------
 1 file changed, 29 insertions(+), 6 deletions(-)

diff --git a/mm/bootmem.c b/mm/bootmem.c
index e023c68b025..ad8eec6e44a 100644
--- a/mm/bootmem.c
+++ b/mm/bootmem.c
@@ -405,6 +405,29 @@ int __init reserve_bootmem(unsigned long addr, unsigned long size,
 }
 #endif /* !CONFIG_HAVE_ARCH_BOOTMEM_NODE */
 
+static unsigned long align_idx(struct bootmem_data *bdata, unsigned long idx,
+			unsigned long step)
+{
+	unsigned long base = bdata->node_min_pfn;
+
+	/*
+	 * Align the index with respect to the node start so that the
+	 * combination of both satisfies the requested alignment.
+	 */
+
+	return ALIGN(base + idx, step) - base;
+}
+
+static unsigned long align_off(struct bootmem_data *bdata, unsigned long off,
+			unsigned long align)
+{
+	unsigned long base = PFN_PHYS(bdata->node_min_pfn);
+
+	/* Same as align_idx for byte offsets */
+
+	return ALIGN(base + off, align) - base;
+}
+
 static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 				unsigned long size, unsigned long align,
 				unsigned long goal, unsigned long limit)
@@ -441,7 +464,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 	else
 		start = ALIGN(min, step);
 
-	sidx = start - bdata->node_min_pfn;;
+	sidx = start - bdata->node_min_pfn;
 	midx = max - bdata->node_min_pfn;
 
 	if (bdata->hint_idx > sidx) {
@@ -450,7 +473,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 		 * catch the fallback below.
 		 */
 		fallback = sidx + 1;
-		sidx = ALIGN(bdata->hint_idx, step);
+		sidx = align_idx(bdata, bdata->hint_idx, step);
 	}
 
 	while (1) {
@@ -459,7 +482,7 @@ static void * __init alloc_bootmem_core(struct bootmem_data *bdata,
 		unsigned long eidx, i, start_off, end_off;
 find_block:
 		sidx = find_next_zero_bit(bdata->node_bootmem_map, midx, sidx);
-		sidx = ALIGN(sidx, step);
+		sidx = align_idx(bdata, sidx, step);
 		eidx = sidx + PFN_UP(size);
 
 		if (sidx >= midx || eidx > midx)
@@ -467,7 +490,7 @@ find_block:
 
 		for (i = sidx; i < eidx; i++)
 			if (test_bit(i, bdata->node_bootmem_map)) {
-				sidx = ALIGN(i, step);
+				sidx = align_idx(bdata, i, step);
 				if (sidx == i)
 					sidx += step;
 				goto find_block;
@@ -475,7 +498,7 @@ find_block:
 
 		if (bdata->last_end_off & (PAGE_SIZE - 1) &&
 				PFN_DOWN(bdata->last_end_off) + 1 == sidx)
-			start_off = ALIGN(bdata->last_end_off, align);
+			start_off = align_off(bdata, bdata->last_end_off, align);
 		else
 			start_off = PFN_PHYS(sidx);
 
@@ -499,7 +522,7 @@ find_block:
 	}
 
 	if (fallback) {
-		sidx = ALIGN(fallback - 1, step);
+		sidx = align_idx(bdata, fallback - 1, step);
 		fallback = 0;
 		goto find_block;
 	}
-- 
GitLab


From 141d87e7debe3334018e46859c7565c44cebda65 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Wed, 20 Aug 2008 14:09:16 -0700
Subject: [PATCH 226/869] Video/Framebuffer: add fuctional power management
 support to Blackfin BF54x LQ043 framebuffer driver

Fix bug: does nor properply resume after suspend mem
Fix for PM_SUSPEND_MEM: Save and restore peripheral base and DMA registers

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/bf54x-lq043fb.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 940467aed13..6d5aa806777 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -733,7 +733,6 @@ static int bfin_bf54x_remove(struct platform_device *pdev)
 static int bfin_bf54x_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct fb_info *fbinfo = platform_get_drvdata(pdev);
-	struct bfin_bf54xfb_info *info = fbinfo->par;
 
 	bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
 	disable_dma(CH_EPPI0);
@@ -747,8 +746,18 @@ static int bfin_bf54x_resume(struct platform_device *pdev)
 	struct fb_info *fbinfo = platform_get_drvdata(pdev);
 	struct bfin_bf54xfb_info *info = fbinfo->par;
 
-	enable_dma(CH_EPPI0);
-	bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+	if (info->lq043_open_cnt) {
+
+		bfin_write_EPPI0_CONTROL(0);
+		SSYNC();
+
+		config_dma(info);
+		config_ppi(info);
+
+		/* start dma */
+		enable_dma(CH_EPPI0);
+		bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() | EPPI_EN);
+	}
 
 	return 0;
 }
-- 
GitLab


From 2d70b68d42b5196a48ccb639e3797f097ef5bea3 Mon Sep 17 00:00:00 2001
From: Ken Chen <kenchen@google.com>
Date: Wed, 20 Aug 2008 14:09:17 -0700
Subject: [PATCH 227/869] fix setpriority(PRIO_PGRP) thread iterator breakage

When user calls sys_setpriority(PRIO_PGRP ...) on a NPTL style multi-LWP
process, only the task leader of the process is affected, all other
sibling LWP threads didn't receive the setting.  The problem was that the
iterator used in sys_setpriority() only iteartes over one task for each
process, ignoring all other sibling thread.

Introduce a new macro do_each_pid_thread / while_each_pid_thread to walk
each thread of a process.  Convert 4 call sites in {set/get}priority and
ioprio_{set/get}.

Signed-off-by: Ken Chen <kenchen@google.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Roland McGrath <roland@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/ioprio.c         | 8 ++++----
 include/linux/pid.h | 9 +++++++++
 kernel/sys.c        | 8 ++++----
 3 files changed, 17 insertions(+), 8 deletions(-)

diff --git a/fs/ioprio.c b/fs/ioprio.c
index c4a1c3c65aa..da3cc460d4d 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -115,11 +115,11 @@ asmlinkage long sys_ioprio_set(int which, int who, int ioprio)
 				pgrp = task_pgrp(current);
 			else
 				pgrp = find_vpid(who);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				ret = set_task_ioprio(p, ioprio);
 				if (ret)
 					break;
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case IOPRIO_WHO_USER:
 			if (!who)
@@ -204,7 +204,7 @@ asmlinkage long sys_ioprio_get(int which, int who)
 				pgrp = task_pgrp(current);
 			else
 				pgrp = find_vpid(who);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				tmpio = get_task_ioprio(p);
 				if (tmpio < 0)
 					continue;
@@ -212,7 +212,7 @@ asmlinkage long sys_ioprio_get(int which, int who)
 					ret = tmpio;
 				else
 					ret = ioprio_best(ret, tmpio);
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case IOPRIO_WHO_USER:
 			if (!who)
diff --git a/include/linux/pid.h b/include/linux/pid.h
index 22921ac4cfd..d7e98ff8021 100644
--- a/include/linux/pid.h
+++ b/include/linux/pid.h
@@ -161,4 +161,13 @@ pid_t pid_vnr(struct pid *pid);
 			}						\
 	} while (0)
 
+#define do_each_pid_thread(pid, type, task)				\
+	do_each_pid_task(pid, type, task) {				\
+		struct task_struct *tg___ = task;			\
+		do {
+
+#define while_each_pid_thread(pid, type, task)				\
+		} while_each_thread(tg___, task);			\
+		task = tg___;						\
+	} while_each_pid_task(pid, type, task)
 #endif /* _LINUX_PID_H */
diff --git a/kernel/sys.c b/kernel/sys.c
index 3dacb00a7f7..038a7bc0901 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -169,9 +169,9 @@ asmlinkage long sys_setpriority(int which, int who, int niceval)
 				pgrp = find_vpid(who);
 			else
 				pgrp = task_pgrp(current);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				error = set_one_prio(p, niceval, error);
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case PRIO_USER:
 			user = current->user;
@@ -229,11 +229,11 @@ asmlinkage long sys_getpriority(int which, int who)
 				pgrp = find_vpid(who);
 			else
 				pgrp = task_pgrp(current);
-			do_each_pid_task(pgrp, PIDTYPE_PGID, p) {
+			do_each_pid_thread(pgrp, PIDTYPE_PGID, p) {
 				niceval = 20 - task_nice(p);
 				if (niceval > retval)
 					retval = niceval;
-			} while_each_pid_task(pgrp, PIDTYPE_PGID, p);
+			} while_each_pid_thread(pgrp, PIDTYPE_PGID, p);
 			break;
 		case PRIO_USER:
 			user = current->user;
-- 
GitLab


From 479db0bf408e65baa14d2a9821abfcbc0804b847 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Wed, 20 Aug 2008 14:09:18 -0700
Subject: [PATCH 228/869] mm: dirty page tracking race fix

There is a race with dirty page accounting where a page may not properly
be accounted for.

clear_page_dirty_for_io() calls page_mkclean; then TestClearPageDirty.

page_mkclean walks the rmaps for that page, and for each one it cleans and
write protects the pte if it was dirty.  It uses page_check_address to
find the pte.  That function has a shortcut to avoid the ptl if the pte is
not present.  Unfortunately, the pte can be switched to not-present then
back to present by other code while holding the page table lock -- this
should not be a signal for page_mkclean to ignore that pte, because it may
be dirty.

For example, powerpc64's set_pte_at will clear a previously present pte
before setting it to the desired value.  There may also be other code in
core mm or in arch which do similar things.

The consequence of the bug is loss of data integrity due to msync, and
loss of dirty page accounting accuracy.  XIP's __xip_unmap could easily
also be unreliable (depending on the exact XIP locking scheme), which can
lead to data corruption.

Fix this by having an option to always take ptl to check the pte in
page_check_address.

It's possible to retain this optimization for page_referenced and
try_to_unmap.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Carsten Otte <cotte@freenet.de>
Cc: Hugh Dickins <hugh@veritas.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/rmap.h |  2 +-
 mm/filemap_xip.c     |  2 +-
 mm/rmap.c            | 14 +++++++++-----
 3 files changed, 11 insertions(+), 7 deletions(-)

diff --git a/include/linux/rmap.h b/include/linux/rmap.h
index 69407f85e10..fed6f5e0b41 100644
--- a/include/linux/rmap.h
+++ b/include/linux/rmap.h
@@ -102,7 +102,7 @@ int try_to_unmap(struct page *, int ignore_refs);
  * Called from mm/filemap_xip.c to unmap empty zero page
  */
 pte_t *page_check_address(struct page *, struct mm_struct *,
-				unsigned long, spinlock_t **);
+				unsigned long, spinlock_t **, int);
 
 /*
  * Used by swapoff to help locate where page is expected in vma.
diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 380ab402d71..8b710ca1324 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -185,7 +185,7 @@ __xip_unmap (struct address_space * mapping,
 		address = vma->vm_start +
 			((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
 		BUG_ON(address < vma->vm_start || address >= vma->vm_end);
-		pte = page_check_address(page, mm, address, &ptl);
+		pte = page_check_address(page, mm, address, &ptl, 1);
 		if (pte) {
 			/* Nuke the page table entry. */
 			flush_cache_page(vma, address, pte_pfn(*pte));
diff --git a/mm/rmap.c b/mm/rmap.c
index 059774712c0..0383acfcb06 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -224,10 +224,14 @@ unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
 /*
  * Check that @page is mapped at @address into @mm.
  *
+ * If @sync is false, page_check_address may perform a racy check to avoid
+ * the page table lock when the pte is not present (helpful when reclaiming
+ * highly shared pages).
+ *
  * On success returns with pte mapped and locked.
  */
 pte_t *page_check_address(struct page *page, struct mm_struct *mm,
-			  unsigned long address, spinlock_t **ptlp)
+			  unsigned long address, spinlock_t **ptlp, int sync)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -249,7 +253,7 @@ pte_t *page_check_address(struct page *page, struct mm_struct *mm,
 
 	pte = pte_offset_map(pmd, address);
 	/* Make a quick check before getting the lock */
-	if (!pte_present(*pte)) {
+	if (!sync && !pte_present(*pte)) {
 		pte_unmap(pte);
 		return NULL;
 	}
@@ -281,7 +285,7 @@ static int page_referenced_one(struct page *page,
 	if (address == -EFAULT)
 		goto out;
 
-	pte = page_check_address(page, mm, address, &ptl);
+	pte = page_check_address(page, mm, address, &ptl, 0);
 	if (!pte)
 		goto out;
 
@@ -450,7 +454,7 @@ static int page_mkclean_one(struct page *page, struct vm_area_struct *vma)
 	if (address == -EFAULT)
 		goto out;
 
-	pte = page_check_address(page, mm, address, &ptl);
+	pte = page_check_address(page, mm, address, &ptl, 1);
 	if (!pte)
 		goto out;
 
@@ -704,7 +708,7 @@ static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
 	if (address == -EFAULT)
 		goto out;
 
-	pte = page_check_address(page, mm, address, &ptl);
+	pte = page_check_address(page, mm, address, &ptl, 0);
 	if (!pte)
 		goto out;
 
-- 
GitLab


From 538f8ea6c85232d00bfa5edd9ba85f16c01057c9 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Wed, 20 Aug 2008 14:09:20 -0700
Subject: [PATCH 229/869] mm: xip fix fault vs sparse page invalidate race

XIP has a race between sparse pages being inserted into page tables, and
sparse pages being zapped when its time to put a non-sparse page in.

What can happen is that a process can be left with a dangling sparse page
in a MAP_SHARED mapping, while the rest of the world sees the non-sparse
version.  Ie.  data corruption.

Guard these operations with a seqlock, making fault-in-sparse-pages the
slowpath, and try-to-unmap-sparse-pages the fastpath.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jared Hulbert <jaredeh@gmail.com>
Acked-by: Carsten Otte <cotte@freenet.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/filemap_xip.c | 60 +++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 46 insertions(+), 14 deletions(-)

diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 8b710ca1324..5b9ec47ea25 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -15,6 +15,8 @@
 #include <linux/rmap.h>
 #include <linux/mmu_notifier.h>
 #include <linux/sched.h>
+#include <linux/seqlock.h>
+#include <linux/mutex.h>
 #include <asm/tlbflush.h>
 #include <asm/io.h>
 
@@ -22,22 +24,18 @@
  * We do use our own empty page to avoid interference with other users
  * of ZERO_PAGE(), such as /dev/zero
  */
+static DEFINE_MUTEX(xip_sparse_mutex);
+static seqcount_t xip_sparse_seq = SEQCNT_ZERO;
 static struct page *__xip_sparse_page;
 
+/* called under xip_sparse_mutex */
 static struct page *xip_sparse_page(void)
 {
 	if (!__xip_sparse_page) {
 		struct page *page = alloc_page(GFP_HIGHUSER | __GFP_ZERO);
 
-		if (page) {
-			static DEFINE_SPINLOCK(xip_alloc_lock);
-			spin_lock(&xip_alloc_lock);
-			if (!__xip_sparse_page)
-				__xip_sparse_page = page;
-			else
-				__free_page(page);
-			spin_unlock(&xip_alloc_lock);
-		}
+		if (page)
+			__xip_sparse_page = page;
 	}
 	return __xip_sparse_page;
 }
@@ -174,11 +172,16 @@ __xip_unmap (struct address_space * mapping,
 	pte_t pteval;
 	spinlock_t *ptl;
 	struct page *page;
+	unsigned count;
+	int locked = 0;
+
+	count = read_seqcount_begin(&xip_sparse_seq);
 
 	page = __xip_sparse_page;
 	if (!page)
 		return;
 
+retry:
 	spin_lock(&mapping->i_mmap_lock);
 	vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff, pgoff) {
 		mm = vma->vm_mm;
@@ -198,6 +201,14 @@ __xip_unmap (struct address_space * mapping,
 		}
 	}
 	spin_unlock(&mapping->i_mmap_lock);
+
+	if (locked) {
+		mutex_unlock(&xip_sparse_mutex);
+	} else if (read_seqcount_retry(&xip_sparse_seq, count)) {
+		mutex_lock(&xip_sparse_mutex);
+		locked = 1;
+		goto retry;
+	}
 }
 
 /*
@@ -218,7 +229,7 @@ static int xip_file_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	int error;
 
 	/* XXX: are VM_FAULT_ codes OK? */
-
+again:
 	size = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
 	if (vmf->pgoff >= size)
 		return VM_FAULT_SIGBUS;
@@ -245,6 +256,7 @@ static int xip_file_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 		__xip_unmap(mapping, vmf->pgoff);
 
 found:
+		printk("%s insert %lx@%lx\n", current->comm, (unsigned long)vmf->virtual_address, xip_pfn);
 		err = vm_insert_mixed(vma, (unsigned long)vmf->virtual_address,
 							xip_pfn);
 		if (err == -ENOMEM)
@@ -252,14 +264,34 @@ found:
 		BUG_ON(err);
 		return VM_FAULT_NOPAGE;
 	} else {
+		int err, ret = VM_FAULT_OOM;
+
+		mutex_lock(&xip_sparse_mutex);
+		write_seqcount_begin(&xip_sparse_seq);
+		error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 0,
+							&xip_mem, &xip_pfn);
+		if (unlikely(!error)) {
+			write_seqcount_end(&xip_sparse_seq);
+			mutex_unlock(&xip_sparse_mutex);
+			goto again;
+		}
+		if (error != -ENODATA)
+			goto out;
 		/* not shared and writable, use xip_sparse_page() */
 		page = xip_sparse_page();
 		if (!page)
-			return VM_FAULT_OOM;
+			goto out;
+		err = vm_insert_page(vma, (unsigned long)vmf->virtual_address,
+							page);
+		if (err == -ENOMEM)
+			goto out;
 
-		page_cache_get(page);
-		vmf->page = page;
-		return 0;
+		ret = VM_FAULT_NOPAGE;
+out:
+		write_seqcount_end(&xip_sparse_seq);
+		mutex_unlock(&xip_sparse_mutex);
+
+		return ret;
 	}
 }
 
-- 
GitLab


From 14bac5acfdb6a40be64acc042c6db73f1a68f6a4 Mon Sep 17 00:00:00 2001
From: Nick Piggin <npiggin@suse.de>
Date: Wed, 20 Aug 2008 14:09:20 -0700
Subject: [PATCH 230/869] mm: xip/ext2 fix block allocation race

XIP can call into get_xip_mem concurrently with the same file,offset with
create=1.  This usually maps down to get_block, which expects the page
lock to prevent such a situation.  This causes ext2 to explode for one
reason or another.

Serialise those calls for the moment.  For common usages today, I suspect
get_xip_mem rarely is called to create new blocks.  In future as XIP
technologies evolve we might need to look at which operations require
scalability, and rework the locking to suit.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Jared Hulbert <jaredeh@gmail.com>
Acked-by: Carsten Otte <cotte@freenet.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/filemap_xip.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 5b9ec47ea25..b5167dfb2f2 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -248,15 +248,16 @@ again:
 		int err;
 
 		/* maybe shared writable, allocate new block */
+		mutex_lock(&xip_sparse_mutex);
 		error = mapping->a_ops->get_xip_mem(mapping, vmf->pgoff, 1,
 							&xip_mem, &xip_pfn);
+		mutex_unlock(&xip_sparse_mutex);
 		if (error)
 			return VM_FAULT_SIGBUS;
 		/* unmap sparse mappings at pgoff from all other vmas */
 		__xip_unmap(mapping, vmf->pgoff);
 
 found:
-		printk("%s insert %lx@%lx\n", current->comm, (unsigned long)vmf->virtual_address, xip_pfn);
 		err = vm_insert_mixed(vma, (unsigned long)vmf->virtual_address,
 							xip_pfn);
 		if (err == -ENOMEM)
@@ -340,8 +341,10 @@ __xip_file_write(struct file *filp, const char __user *buf,
 						&xip_mem, &xip_pfn);
 		if (status == -ENODATA) {
 			/* we allocate a new page unmap it */
+			mutex_lock(&xip_sparse_mutex);
 			status = a_ops->get_xip_mem(mapping, index, 1,
 							&xip_mem, &xip_pfn);
+			mutex_unlock(&xip_sparse_mutex);
 			if (!status)
 				/* unmap page at pgoff from all other vmas */
 				__xip_unmap(mapping, index);
-- 
GitLab


From b42f931737bea8ca3982449d63ec46410d13e891 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 20 Aug 2008 14:09:21 -0700
Subject: [PATCH 231/869] rtc: rtc-ds1374: fix 'no irq' case handling

On a PowerPC board with ds1374 RTC I'm getting this error while RTC tries
to probe:

rtc-ds1374 0-0068: unable to request IRQ

This happens because I2C probing code (drivers/of/of_i2c.c) is specifying
IRQ0 for 'no irq' case, which is correct.

The driver handles this incorrectly, though. This patch fixes it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-ds1374.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 640acd20fdd..a150418fba7 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -173,7 +173,7 @@ static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	int cr, sr;
 	int ret = 0;
 
-	if (client->irq < 0)
+	if (client->irq <= 0)
 		return -EINVAL;
 
 	mutex_lock(&ds1374->mutex);
@@ -212,7 +212,7 @@ static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 	int cr;
 	int ret = 0;
 
-	if (client->irq < 0)
+	if (client->irq <= 0)
 		return -EINVAL;
 
 	ret = ds1374_read_time(dev, &now);
@@ -381,7 +381,7 @@ static int ds1374_probe(struct i2c_client *client,
 	if (ret)
 		goto out_free;
 
-	if (client->irq >= 0) {
+	if (client->irq > 0) {
 		ret = request_irq(client->irq, ds1374_irq, 0,
 		                  "ds1374", client);
 		if (ret) {
@@ -401,7 +401,7 @@ static int ds1374_probe(struct i2c_client *client,
 	return 0;
 
 out_irq:
-	if (client->irq >= 0)
+	if (client->irq > 0)
 		free_irq(client->irq, client);
 
 out_free:
@@ -414,7 +414,7 @@ static int __devexit ds1374_remove(struct i2c_client *client)
 {
 	struct ds1374 *ds1374 = i2c_get_clientdata(client);
 
-	if (client->irq >= 0) {
+	if (client->irq > 0) {
 		mutex_lock(&ds1374->mutex);
 		ds1374->exiting = 1;
 		mutex_unlock(&ds1374->mutex);
-- 
GitLab


From d847471d063663b9f36927d265c66a270c0cfaab Mon Sep 17 00:00:00 2001
From: Ian Campbell <ijc@hellion.org.uk>
Date: Wed, 20 Aug 2008 14:09:23 -0700
Subject: [PATCH 232/869] fbdefio: add set_page_dirty handler to deferred IO FB

Fixes kernel BUG at lib/radix-tree.c:473.

Previously the handler was incidentally provided by tmpfs but this was
removed with:

  commit 14fcc23fdc78e9d32372553ccf21758a9bd56fa1
  Author: Hugh Dickins <hugh@veritas.com>
  Date:   Mon Jul 28 15:46:19 2008 -0700

    tmpfs: fix kernel BUG in shmem_delete_inode

relying on this behaviour was incorrect in any case and the BUG also
appeared when the device node was on an ext3 filesystem.

v2: override a_ops at open() time rather than mmap() time to minimise
races per AKPM's concerns.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Kel Modderman <kel@otaku42.de>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <stable@kernel.org> [14fcc23fd is in 2.6.25.14 and 2.6.26.1]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/fb_defio.c | 19 +++++++++++++++++++
 drivers/video/fbmem.c    |  4 ++++
 include/linux/fb.h       |  3 +++
 3 files changed, 26 insertions(+)

diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 59df132cc37..4835bdc4e9f 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -114,6 +114,17 @@ static struct vm_operations_struct fb_deferred_io_vm_ops = {
 	.page_mkwrite	= fb_deferred_io_mkwrite,
 };
 
+static int fb_deferred_io_set_page_dirty(struct page *page)
+{
+	if (!PageDirty(page))
+		SetPageDirty(page);
+	return 0;
+}
+
+static const struct address_space_operations fb_deferred_io_aops = {
+	.set_page_dirty = fb_deferred_io_set_page_dirty,
+};
+
 static int fb_deferred_io_mmap(struct fb_info *info, struct vm_area_struct *vma)
 {
 	vma->vm_ops = &fb_deferred_io_vm_ops;
@@ -163,6 +174,14 @@ void fb_deferred_io_init(struct fb_info *info)
 }
 EXPORT_SYMBOL_GPL(fb_deferred_io_init);
 
+void fb_deferred_io_open(struct fb_info *info,
+			 struct inode *inode,
+			 struct file *file)
+{
+	file->f_mapping->a_ops = &fb_deferred_io_aops;
+}
+EXPORT_SYMBOL_GPL(fb_deferred_io_open);
+
 void fb_deferred_io_cleanup(struct fb_info *info)
 {
 	void *screen_base = (void __force *) info->screen_base;
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index 6b487801eea..98843c2ecf7 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1344,6 +1344,10 @@ fb_open(struct inode *inode, struct file *file)
 		if (res)
 			module_put(info->fbops->owner);
 	}
+#ifdef CONFIG_FB_DEFERRED_IO
+	if (info->fbdefio)
+		fb_deferred_io_open(info, inode, file);
+#endif
 out:
 	unlock_kernel();
 	return res;
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 3b8870e32af..531ccd5f596 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -976,6 +976,9 @@ static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
 
 /* drivers/video/fb_defio.c */
 extern void fb_deferred_io_init(struct fb_info *info);
+extern void fb_deferred_io_open(struct fb_info *info,
+				struct inode *inode,
+				struct file *file);
 extern void fb_deferred_io_cleanup(struct fb_info *info);
 extern int fb_deferred_io_fsync(struct file *file, struct dentry *dentry,
 				int datasync);
-- 
GitLab


From 82d63fc9e30687c055b97928942b8893ea65b0bb Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ZenIV.linux.org.uk>
Date: Wed, 20 Aug 2008 14:09:24 -0700
Subject: [PATCH 233/869] cramfs: fix named-pipe handling

After commit a97c9bf33f4612e2aed6f000f6b1d268b6814f3c (fix cramfs
making duplicate entries in inode cache) in kernel 2.6.14, named-pipe
on cramfs does not work properly.

It seems the commit make all named-pipe on cramfs share their inode
(and named-pipe buffer).

Make ..._test() refuse to merge inodes with ->i_ino == 1, take inode setup
back to get_cramfs_inode() and make ->drop_inode() evict ones with ->i_ino
== 1 immediately.

Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>		[2.6.14 and later]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/cramfs/inode.c | 84 +++++++++++++++++++++--------------------------
 1 file changed, 38 insertions(+), 46 deletions(-)

diff --git a/fs/cramfs/inode.c b/fs/cramfs/inode.c
index 0c3b618c15b..f40423eb1a1 100644
--- a/fs/cramfs/inode.c
+++ b/fs/cramfs/inode.c
@@ -43,58 +43,13 @@ static DEFINE_MUTEX(read_mutex);
 static int cramfs_iget5_test(struct inode *inode, void *opaque)
 {
 	struct cramfs_inode *cramfs_inode = opaque;
-
-	if (inode->i_ino != CRAMINO(cramfs_inode))
-		return 0; /* does not match */
-
-	if (inode->i_ino != 1)
-		return 1;
-
-	/* all empty directories, char, block, pipe, and sock, share inode #1 */
-
-	if ((inode->i_mode != cramfs_inode->mode) ||
-	    (inode->i_gid != cramfs_inode->gid) ||
-	    (inode->i_uid != cramfs_inode->uid))
-		return 0; /* does not match */
-
-	if ((S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode)) &&
-	    (inode->i_rdev != old_decode_dev(cramfs_inode->size)))
-		return 0; /* does not match */
-
-	return 1; /* matches */
+	return inode->i_ino == CRAMINO(cramfs_inode) && inode->i_ino != 1;
 }
 
 static int cramfs_iget5_set(struct inode *inode, void *opaque)
 {
-	static struct timespec zerotime;
 	struct cramfs_inode *cramfs_inode = opaque;
-	inode->i_mode = cramfs_inode->mode;
-	inode->i_uid = cramfs_inode->uid;
-	inode->i_size = cramfs_inode->size;
-	inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
-	inode->i_gid = cramfs_inode->gid;
-	/* Struct copy intentional */
-	inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
 	inode->i_ino = CRAMINO(cramfs_inode);
-	/* inode->i_nlink is left 1 - arguably wrong for directories,
-	   but it's the best we can do without reading the directory
-           contents.  1 yields the right result in GNU find, even
-	   without -noleaf option. */
-	if (S_ISREG(inode->i_mode)) {
-		inode->i_fop = &generic_ro_fops;
-		inode->i_data.a_ops = &cramfs_aops;
-	} else if (S_ISDIR(inode->i_mode)) {
-		inode->i_op = &cramfs_dir_inode_operations;
-		inode->i_fop = &cramfs_directory_operations;
-	} else if (S_ISLNK(inode->i_mode)) {
-		inode->i_op = &page_symlink_inode_operations;
-		inode->i_data.a_ops = &cramfs_aops;
-	} else {
-		inode->i_size = 0;
-		inode->i_blocks = 0;
-		init_special_inode(inode, inode->i_mode,
-			old_decode_dev(cramfs_inode->size));
-	}
 	return 0;
 }
 
@@ -104,12 +59,48 @@ static struct inode *get_cramfs_inode(struct super_block *sb,
 	struct inode *inode = iget5_locked(sb, CRAMINO(cramfs_inode),
 					    cramfs_iget5_test, cramfs_iget5_set,
 					    cramfs_inode);
+	static struct timespec zerotime;
+
 	if (inode && (inode->i_state & I_NEW)) {
+		inode->i_mode = cramfs_inode->mode;
+		inode->i_uid = cramfs_inode->uid;
+		inode->i_size = cramfs_inode->size;
+		inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
+		inode->i_gid = cramfs_inode->gid;
+		/* Struct copy intentional */
+		inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
+		/* inode->i_nlink is left 1 - arguably wrong for directories,
+		   but it's the best we can do without reading the directory
+		   contents.  1 yields the right result in GNU find, even
+		   without -noleaf option. */
+		if (S_ISREG(inode->i_mode)) {
+			inode->i_fop = &generic_ro_fops;
+			inode->i_data.a_ops = &cramfs_aops;
+		} else if (S_ISDIR(inode->i_mode)) {
+			inode->i_op = &cramfs_dir_inode_operations;
+			inode->i_fop = &cramfs_directory_operations;
+		} else if (S_ISLNK(inode->i_mode)) {
+			inode->i_op = &page_symlink_inode_operations;
+			inode->i_data.a_ops = &cramfs_aops;
+		} else {
+			inode->i_size = 0;
+			inode->i_blocks = 0;
+			init_special_inode(inode, inode->i_mode,
+				old_decode_dev(cramfs_inode->size));
+		}
 		unlock_new_inode(inode);
 	}
 	return inode;
 }
 
+static void cramfs_drop_inode(struct inode *inode)
+{
+	if (inode->i_ino == 1)
+		generic_delete_inode(inode);
+	else
+		generic_drop_inode(inode);
+}
+
 /*
  * We have our own block cache: don't fill up the buffer cache
  * with the rom-image, because the way the filesystem is set
@@ -534,6 +525,7 @@ static const struct super_operations cramfs_ops = {
 	.put_super	= cramfs_put_super,
 	.remount_fs	= cramfs_remount,
 	.statfs		= cramfs_statfs,
+	.drop_inode	= cramfs_drop_inode,
 };
 
 static int cramfs_get_sb(struct file_system_type *fs_type,
-- 
GitLab


From 6a55617ed5d1aa62b850de2cf66f5ede2eef4825 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 20 Aug 2008 19:35:56 -0700
Subject: [PATCH 234/869] Linux v2.6.27-rc4

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 53bf6ec1af9..2e15e0b4483 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
-- 
GitLab


From ba1616d921429ffe7480e8835e85f95ff041add8 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 31 Jul 2008 17:06:31 -0500
Subject: [PATCH 235/869] powerpc: Fix whitespace merge in mpc8641 hpcn device
 tree

When we coverted the .dts to v1 we lost a space between the irq
and its polarity/sense information.  This causes a bit of chaos
as the reset of the blob is off by one cell.

This was noticed by booting and getting errors w/ATA due to
lock of interrupts.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/mpc8641_hpcn.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index ae08761ffff..d665e767822 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -411,7 +411,7 @@
 			0xe000 0 0 1 &i8259 12 2
 			0xe100 0 0 2 &i8259 9 2
 			0xe200 0 0 3 &i8259 10 2
-			0xe300 0 0 4 &i8259 112
+			0xe300 0 0 4 &i8259 11 2
 
 			// IDSEL 0x1d  Audio
 			0xe800 0 0 1 &i8259 6 2
-- 
GitLab


From d27a736c7a62c3451e389aa8e0dfc64dab119b9b Mon Sep 17 00:00:00 2001
From: Wolfgang Grandegger <wg@grandegger.com>
Date: Sun, 17 Aug 2008 10:51:25 +0200
Subject: [PATCH 236/869] powerpc/85xx: TQM8548: DTS file fixes and cleanup

Due to the missing compatible property for the SOC, the MPC I2C buses are
not found any more. This patch fixes this issue. Furthermore it corrects
the name of the SOC node and adds the missing I2C node for the RTC.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/dts/tqm8548-bigflash.dts | 8 +++++++-
 arch/powerpc/boot/dts/tqm8548.dts          | 3 ++-
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 64d2d5bbcdf..4199e89b4e5 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -50,13 +50,14 @@
 		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
 	};
 
-	soc8548@a0000000 {
+	soc@a0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xa0000000 0x100000>;
 		reg = <0xa0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
 
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
@@ -83,6 +84,11 @@
 			interrupts = <43 2>;
 			interrupt-parent = <&mpic>;
 			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
 		};
 
 		i2c@3100 {
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 2563112cabd..58ee4185454 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -50,13 +50,14 @@
 		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
 	};
 
-	soc8548@e0000000 {
+	soc@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
+		compatible = "fsl,mpc8548-immr", "simple-bus";
 
 		memory-controller@2000 {
 			compatible = "fsl,mpc8548-memory-controller";
-- 
GitLab


From 61a4e9e91dd3916ef91aa4899b7271bba0248677 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Wed, 20 Aug 2008 10:29:09 -0500
Subject: [PATCH 237/869] powerpc: fix memory leaks in QE library

Fix two memory leaks in the Freescale QE library: add a missing kfree() in
ucc_fast_init() and ucc_slow_init() if the ioremap() fails, and update
ucc_fast_free() and ucc_slow_free() to call iounmap() if necessary.

Based on a patch from Tony Breeds <tony@bakeyournoodle.com>.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/qe_lib/ucc_fast.c | 4 ++++
 arch/powerpc/sysdev/qe_lib/ucc_slow.c | 8 +++++---
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 1aecb075a72..25fbbfaa837 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -208,6 +208,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
 	if (uccf->uf_regs == NULL) {
 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+		kfree(uccf);
 		return -ENOMEM;
 	}
 
@@ -355,6 +356,9 @@ void ucc_fast_free(struct ucc_fast_private * uccf)
 	if (uccf->ucc_fast_rx_virtual_fifo_base_offset)
 		qe_muram_free(uccf->ucc_fast_rx_virtual_fifo_base_offset);
 
+	if (uccf->uf_regs)
+		iounmap(uccf->uf_regs);
+
 	kfree(uccf);
 }
 EXPORT_SYMBOL(ucc_fast_free);
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index a578bc77b9d..e1d6a134015 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -171,6 +171,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
 	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
 	if (uccs->us_regs == NULL) {
 		printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
+		kfree(uccs);
 		return -ENOMEM;
 	}
 
@@ -367,10 +368,11 @@ void ucc_slow_free(struct ucc_slow_private * uccs)
 	if (uccs->tx_base_offset)
 		qe_muram_free(uccs->tx_base_offset);
 
-	if (uccs->us_pram) {
+	if (uccs->us_pram)
 		qe_muram_free(uccs->us_pram_offset);
-		uccs->us_pram = NULL;
-	}
+
+	if (uccs->us_regs)
+		iounmap(uccs->us_regs);
 
 	kfree(uccs);
 }
-- 
GitLab


From 639d64456e20cbfc866b18dc03cf9f9babc9c7cd Mon Sep 17 00:00:00 2001
From: Laurent Pinchart <laurentp@cse-semaphore.com>
Date: Tue, 19 Aug 2008 14:20:23 +0200
Subject: [PATCH 238/869] cpm2: Fix race condition in CPM2 GPIO library.

The CPM2 GPIO library code uses the non thread-safe clrbits32/setbits32
macros. This patch protects them with a spinlock.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/sysdev/cpm_common.c | 37 ++++++++++++++++++++++----------
 1 file changed, 26 insertions(+), 11 deletions(-)

diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index 53da8a079f9..00d3d17c84a 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -254,15 +254,11 @@ static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
 	return !!(in_be32(&iop->dat) & pin_mask);
 }
 
-static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+static void __cpm2_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
+	int value)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
 	struct cpm2_ioports __iomem *iop = mm_gc->regs;
-	unsigned long flags;
-	u32 pin_mask = 1 << (31 - gpio);
-
-	spin_lock_irqsave(&cpm2_gc->lock, flags);
 
 	if (value)
 		cpm2_gc->cpdata |= pin_mask;
@@ -270,6 +266,18 @@ static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 		cpm2_gc->cpdata &= ~pin_mask;
 
 	out_be32(&iop->dat, cpm2_gc->cpdata);
+}
+
+static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	__cpm2_gpio32_set(mm_gc, pin_mask, value);
 
 	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
 }
@@ -277,14 +285,17 @@ static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
 	struct cpm2_ioports __iomem *iop = mm_gc->regs;
-	u32 pin_mask;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
 
-	pin_mask = 1 << (31 - gpio);
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
 
 	setbits32(&iop->dir, pin_mask);
+	__cpm2_gpio32_set(mm_gc, pin_mask, val);
 
-	cpm2_gpio32_set(gc, gpio, val);
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
 
 	return 0;
 }
@@ -292,13 +303,17 @@ static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
 	struct cpm2_ioports __iomem *iop = mm_gc->regs;
-	u32 pin_mask;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
 
-	pin_mask = 1 << (31 - gpio);
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
 
 	clrbits32(&iop->dir, pin_mask);
 
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+
 	return 0;
 }
 
-- 
GitLab


From 8dd217b27e32081121c31d927e7c70f6dbf6f5c6 Mon Sep 17 00:00:00 2001
From: Scott Wood <scottwood@freescale.com>
Date: Thu, 31 Jul 2008 19:10:22 +0300
Subject: [PATCH 239/869] powerpc: Add cuImage.mpc866ads to the bootwrapper as
 a cuboot-8xx target

This patch fixes the following build error with mpc866_ads_defconfig:

<--  snip  -->

...
  WRAP    arch/powerpc/boot/cuImage.mpc866ads
powerpc64-linux-ld: arch/powerpc/boot/cuboot-mpc866ads.o: No such file: No such file or directory
make[2]: *** [arch/powerpc/boot/cuImage.mpc866ads] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 arch/powerpc/boot/wrapper | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 644bf9d4ea0..965c237c122 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -165,7 +165,7 @@ cuboot*)
     binary=y
     gzip=
     case "$platform" in
-    *-mpc885ads|*-adder875*|*-ep88xc)
+    *-mpc866ads|*-mpc885ads|*-adder875*|*-ep88xc)
         platformo=$object/cuboot-8xx.o
         ;;
     *5200*|*-motionpro)
-- 
GitLab


From efc2dead2c82cae31943828f6d977c483942b0eb Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Wed, 20 Aug 2008 12:44:55 +0200
Subject: [PATCH 240/869] sched: enable LB_BIAS by default

Yanmin reported a significant regression on his 16-core machine due to:

  commit 93b75217df39e6d75889cc6f8050343286aff4a5
  Author: Peter Zijlstra <a.p.zijlstra@chello.nl>
  Date:   Fri Jun 27 13:41:33 2008 +0200

Flip back to the old behaviour.

Reported-by: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_features.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/sched_features.h b/kernel/sched_features.h
index 862b06bd560..9353ca78154 100644
--- a/kernel/sched_features.h
+++ b/kernel/sched_features.h
@@ -8,6 +8,6 @@ SCHED_FEAT(SYNC_WAKEUPS, 1)
 SCHED_FEAT(HRTICK, 1)
 SCHED_FEAT(DOUBLE_TICK, 0)
 SCHED_FEAT(ASYM_GRAN, 1)
-SCHED_FEAT(LB_BIAS, 0)
+SCHED_FEAT(LB_BIAS, 1)
 SCHED_FEAT(LB_WAKEUP_UPDATE, 1)
 SCHED_FEAT(ASYM_EFF_LOAD, 1)
-- 
GitLab


From 79c4375bf2df96d725475e0c061a4d78c3bd0884 Mon Sep 17 00:00:00 2001
From: Dennis Jansen <Dennis.Jansen@web.de>
Date: Wed, 20 Aug 2008 16:44:03 +0200
Subject: [PATCH 241/869] ACPI: Fix typo in "Disable MWAIT via DMI on broken
 Compal board"

This fixes a typo in commit 2a2a64714d9c40f7705c4de1e79a5b855c7211a9
"Disable MWAIT via DMI on broken Compal board".

It allows the nomwait dmi check to actually detect the Acer 5220.

Signed-off-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Dennis Jansen <dennis.jansen@web.de>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/processor_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index e36422a7122..499f2fad204 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -138,7 +138,7 @@ static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
 	{
 	set_no_mwait, "Extensa 5220", {
 	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
-	DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
 	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
 	{},
-- 
GitLab


From f0df2d6b52ad7db5edf56909509d51be66fe90be Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Wed, 20 Aug 2008 16:41:45 -0700
Subject: [PATCH 242/869] acpi: add checking for NULL early param

The early_param handling function could recieve NULL pointer as argument
in case if user didn't enter parameter value.  So we have to be ready for
a such situation and do check for NULL pointer if needed.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/tables.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index c3419182c9a..775c97a282b 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -300,6 +300,8 @@ int __init acpi_table_init(void)
 
 static int __init acpi_parse_apic_instance(char *str)
 {
+	if (!str)
+		return -EINVAL;
 
 	acpi_apic_instance = simple_strtoul(str, NULL, 0);
 
-- 
GitLab


From 01dcb0443ed89eccf26c2b43f1ea13b368ae740d Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Wed, 20 Aug 2008 16:35:19 -0700
Subject: [PATCH 243/869] rcu: fix synchronize_rcu() so that kernel-doc works

Fix RCU's synchronize_rcu() so that it looks like a C function, enabling
it to be recognized as a function with kernel-doc annotation.

Warning(linux-2.6.26-git11//kernel/rcupdate.c:81): No description found for parameter 'synchronize_rcu'
Warning(linux-2.6.26-git11//kernel/rcupdate.c:81): No description found for parameter 'call_rcu'

[akpm@linux-foundation.org: fix comment]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/rcupdate.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c
index f14f372cf6f..467d5940f62 100644
--- a/kernel/rcupdate.c
+++ b/kernel/rcupdate.c
@@ -77,6 +77,7 @@ void wakeme_after_rcu(struct rcu_head  *head)
  * sections are delimited by rcu_read_lock() and rcu_read_unlock(),
  * and may be nested.
  */
+void synchronize_rcu(void);	/* Makes kernel-doc tools happy */
 synchronize_rcu_xxx(synchronize_rcu, call_rcu)
 EXPORT_SYMBOL_GPL(synchronize_rcu);
 
-- 
GitLab


From 3c4fbe5e01d7e5309be5045e7ae0db20a049e6dc Mon Sep 17 00:00:00 2001
From: Miao Xie <miaox@cn.fujitsu.com>
Date: Wed, 20 Aug 2008 16:37:38 -0700
Subject: [PATCH 244/869] nohz: fix wrong event handler after online an
 offlined cpu

On the tickless system(CONFIG_NO_HZ=y and CONFIG_HIGH_RES_TIMERS=n), after
I made an offlined cpu online, I found this cpu's event handler was
tick_handle_periodic, not tick_nohz_handler.

After debuging, I found this bug was caused by the wrong tick mode.  the
tick mode is not changed to NOHZ_MODE_INACTIVE when the cpu is offline.

This patch fixes this bug.

Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/tick.h     | 5 ++++-
 kernel/time/tick-sched.c | 6 +++++-
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/include/linux/tick.h b/include/linux/tick.h
index d3c02695dc5..8cf8cfe2cc9 100644
--- a/include/linux/tick.h
+++ b/include/linux/tick.h
@@ -74,10 +74,13 @@ extern struct tick_device *tick_get_device(int cpu);
 extern int tick_init_highres(void);
 extern int tick_program_event(ktime_t expires, int force);
 extern void tick_setup_sched_timer(void);
+# endif
+
+# if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
 extern void tick_cancel_sched_timer(int cpu);
 # else
 static inline void tick_cancel_sched_timer(int cpu) { }
-# endif /* HIGHRES */
+# endif
 
 # ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
 extern struct tick_device *tick_get_broadcast_device(void);
diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index f5da526424a..7a46bde78c6 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -643,17 +643,21 @@ void tick_setup_sched_timer(void)
 		ts->nohz_mode = NOHZ_MODE_HIGHRES;
 #endif
 }
+#endif /* HIGH_RES_TIMERS */
 
+#if defined CONFIG_NO_HZ || defined CONFIG_HIGH_RES_TIMERS
 void tick_cancel_sched_timer(int cpu)
 {
 	struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu);
 
+# ifdef CONFIG_HIGH_RES_TIMERS
 	if (ts->sched_timer.base)
 		hrtimer_cancel(&ts->sched_timer);
+# endif
 
 	ts->nohz_mode = NOHZ_MODE_INACTIVE;
 }
-#endif /* HIGH_RES_TIMERS */
+#endif
 
 /**
  * Async notification about clocksource changes
-- 
GitLab


From 85d577979a8a94a32ca1d828a91c2eb8300bc9f2 Mon Sep 17 00:00:00 2001
From: David Howells <dhowells@redhat.com>
Date: Mon, 18 Aug 2008 11:58:17 +0200
Subject: [PATCH 245/869] werror: fix pci calgary

Fix an integer comparison always false warning in the PCI Calgary 64 driver.

A u8 is being compared to something that's 512 by default, resulting in the
following warning:

arch/x86/kernel/pci-calgary_64.c:1285: warning: comparison is always false due to limited range of data type

This was introduced by patch b34e90b8f0f30151349134f87b5dc6ef75a5218c.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/pci-calgary_64.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 218d783ed7a..363a74ec7a7 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -1269,13 +1269,15 @@ static inline int __init determine_tce_table_size(u64 ram)
 static int __init build_detail_arrays(void)
 {
 	unsigned long ptr;
-	int i, scal_detail_size, rio_detail_size;
+	unsigned numnodes, i;
+	int scal_detail_size, rio_detail_size;
 
-	if (rio_table_hdr->num_scal_dev > MAX_NUMNODES){
+	numnodes = rio_table_hdr->num_scal_dev;
+	if (numnodes > MAX_NUMNODES){
 		printk(KERN_WARNING
 			"Calgary: MAX_NUMNODES too low! Defined as %d, "
 			"but system has %d nodes.\n",
-			MAX_NUMNODES, rio_table_hdr->num_scal_dev);
+			MAX_NUMNODES, numnodes);
 		return -ENODEV;
 	}
 
@@ -1296,8 +1298,7 @@ static int __init build_detail_arrays(void)
 	}
 
 	ptr = ((unsigned long)rio_table_hdr) + 3;
-	for (i = 0; i < rio_table_hdr->num_scal_dev;
-		    i++, ptr += scal_detail_size)
+	for (i = 0; i < numnodes; i++, ptr += scal_detail_size)
 		scal_devs[i] = (struct scal_detail *)ptr;
 
 	for (i = 0; i < rio_table_hdr->num_rio_dev;
-- 
GitLab


From 0c072bb452f0cfd4959bc01ff3627d6385255b20 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Tue, 8 Jul 2008 09:50:22 -0700
Subject: [PATCH 246/869] x86: use WARN() in arch/x86/mm/ioremap.c

Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: akpm@linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/ioremap.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 6ba6f889c79..d4b6e6a29ae 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -553,13 +553,11 @@ static int __init check_early_ioremap_leak(void)
 {
 	if (!early_ioremap_nested)
 		return 0;
-
-	printk(KERN_WARNING
+	WARN(1, KERN_WARNING
 	       "Debug warning: early ioremap leak of %d areas detected.\n",
-	       early_ioremap_nested);
+		early_ioremap_nested);
 	printk(KERN_WARNING
-	       "please boot with early_ioremap_debug and report the dmesg.\n");
-	WARN_ON(1);
+		"please boot with early_ioremap_debug and report the dmesg.\n");
 
 	return 1;
 }
-- 
GitLab


From bde78a79a6eb015f33aa4660df1b06f5135def20 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Tue, 8 Jul 2008 09:51:56 -0700
Subject: [PATCH 247/869] x86: use WARN() in arch/x86/kernel

Use WARN() instead of a printk+WARN_ON() pair; this way the message
becomes part of the warning section for better reporting/collection.
This also allowed the folding of some if()'s into the WARN()

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: akpm@linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/main.c  | 5 +----
 arch/x86/kernel/pci-calgary_64.c | 3 +--
 arch/x86/kernel/tsc_sync.c       | 6 ++----
 3 files changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 6f23969c8fa..b117d7f8a56 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -1496,11 +1496,8 @@ int __init mtrr_trim_uncached_memory(unsigned long end_pfn)
 
 	/* kvm/qemu doesn't have mtrr set right, don't trim them all */
 	if (!highest_pfn) {
-		if (!kvm_para_available()) {
-			printk(KERN_WARNING
+		WARN(!kvm_para_available(), KERN_WARNING
 				"WARNING: strange, CPU MTRRs all blank?\n");
-			WARN_ON(1);
-		}
 		return 0;
 	}
 
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 363a74ec7a7..dcdac6c826e 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -343,9 +343,8 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 	/* were we called with bad_dma_address? */
 	badend = bad_dma_address + (EMERGENCY_PAGES * PAGE_SIZE);
 	if (unlikely((dma_addr >= bad_dma_address) && (dma_addr < badend))) {
-		printk(KERN_ERR "Calgary: driver tried unmapping bad DMA "
+		WARN(1, KERN_ERR "Calgary: driver tried unmapping bad DMA "
 		       "address 0x%Lx\n", dma_addr);
-		WARN_ON(1);
 		return;
 	}
 
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 0577825cf89..9ffb01c31c4 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -88,11 +88,9 @@ static __cpuinit void check_tsc_warp(void)
 			__raw_spin_unlock(&sync_lock);
 		}
 	}
-	if (!(now-start)) {
-		printk("Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
+	WARN(!(now-start),
+		"Warning: zero tsc calibration delta: %Ld [max: %Ld]\n",
 			now-start, end-start);
-		WARN_ON(1);
-	}
 }
 
 /*
-- 
GitLab


From 320dcc30f498e0a8b282b14cf0feed1897ea3b34 Mon Sep 17 00:00:00 2001
From: Peer Chen <peerchen@gmail.com>
Date: Wed, 20 Aug 2008 16:43:24 -0700
Subject: [PATCH 248/869] ALSA: hda_intel: enable snoop for nvidia HDA
 controller

Enable the snoop for nvidia hda controller to avoid data coherence issue.

Signed-off-by: Peer Chen <peerchen@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/hda_intel.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index a73d6ca0a90..1c53e337ecb 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -278,6 +278,9 @@ enum {
 /* Defines for Nvidia HDA support */
 #define NVIDIA_HDA_TRANSREG_ADDR      0x4e
 #define NVIDIA_HDA_ENABLE_COHBITS     0x0f
+#define NVIDIA_HDA_ISTRM_COH          0x4d
+#define NVIDIA_HDA_OSTRM_COH          0x4c
+#define NVIDIA_HDA_ENABLE_COHBIT      0x01
 
 /* Defines for Intel SCH HDA snoop control */
 #define INTEL_SCH_HDA_DEVC      0x78
@@ -900,6 +903,12 @@ static void azx_init_pci(struct azx *chip)
 		update_pci_byte(chip->pci,
 				NVIDIA_HDA_TRANSREG_ADDR,
 				0x0f, NVIDIA_HDA_ENABLE_COHBITS);
+		update_pci_byte(chip->pci,
+				NVIDIA_HDA_ISTRM_COH,
+				0x01, NVIDIA_HDA_ENABLE_COHBIT);
+		update_pci_byte(chip->pci,
+				NVIDIA_HDA_OSTRM_COH,
+				0x01, NVIDIA_HDA_ENABLE_COHBIT);
 		break;
 	case AZX_DRIVER_SCH:
 		pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
-- 
GitLab


From 5e739d1752aca4e8f3e794d431503bfca3162df4 Mon Sep 17 00:00:00 2001
From: Vlad Yasevich <vladislav.yasevich@hp.com>
Date: Thu, 21 Aug 2008 03:34:25 -0700
Subject: [PATCH 249/869] sctp: fix potential panics in the SCTP-AUTH API.

All of the SCTP-AUTH socket options could cause a panic
if the extension is disabled and the API is envoked.

Additionally, there were some additional assumptions that
certain pointers would always be valid which may not
always be the case.

This patch hardens the API and address all of the crash
scenarios.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sctp/endpointola.c |  4 +-
 net/sctp/socket.c      | 85 ++++++++++++++++++++++++++++++++----------
 2 files changed, 67 insertions(+), 22 deletions(-)

diff --git a/net/sctp/endpointola.c b/net/sctp/endpointola.c
index e39a0cdef18..4c8d9f45ce0 100644
--- a/net/sctp/endpointola.c
+++ b/net/sctp/endpointola.c
@@ -103,6 +103,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
 
 		/* Initialize the CHUNKS parameter */
 		auth_chunks->param_hdr.type = SCTP_PARAM_CHUNKS;
+		auth_chunks->param_hdr.length = htons(sizeof(sctp_paramhdr_t));
 
 		/* If the Add-IP functionality is enabled, we must
 		 * authenticate, ASCONF and ASCONF-ACK chunks
@@ -110,8 +111,7 @@ static struct sctp_endpoint *sctp_endpoint_init(struct sctp_endpoint *ep,
 		if (sctp_addip_enable) {
 			auth_chunks->chunks[0] = SCTP_CID_ASCONF;
 			auth_chunks->chunks[1] = SCTP_CID_ASCONF_ACK;
-			auth_chunks->param_hdr.length =
-					htons(sizeof(sctp_paramhdr_t) + 2);
+			auth_chunks->param_hdr.length += htons(2);
 		}
 	}
 
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index dbb79adf8f3..bb5c9ef1304 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3055,6 +3055,9 @@ static int sctp_setsockopt_auth_chunk(struct sock *sk,
 {
 	struct sctp_authchunk val;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen != sizeof(struct sctp_authchunk))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, optlen))
@@ -3085,6 +3088,9 @@ static int sctp_setsockopt_hmac_ident(struct sock *sk,
 	struct sctp_hmacalgo *hmacs;
 	int err;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen < sizeof(struct sctp_hmacalgo))
 		return -EINVAL;
 
@@ -3123,6 +3129,9 @@ static int sctp_setsockopt_auth_key(struct sock *sk,
 	struct sctp_association *asoc;
 	int ret;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen <= sizeof(struct sctp_authkey))
 		return -EINVAL;
 
@@ -3160,6 +3169,9 @@ static int sctp_setsockopt_active_key(struct sock *sk,
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen != sizeof(struct sctp_authkeyid))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, optlen))
@@ -3185,6 +3197,9 @@ static int sctp_setsockopt_del_key(struct sock *sk,
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (optlen != sizeof(struct sctp_authkeyid))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, optlen))
@@ -5197,19 +5212,29 @@ static int sctp_getsockopt_maxburst(struct sock *sk, int len,
 static int sctp_getsockopt_hmac_ident(struct sock *sk, int len,
 				    char __user *optval, int __user *optlen)
 {
+	struct sctp_hmacalgo  __user *p = (void __user *)optval;
 	struct sctp_hmac_algo_param *hmacs;
-	__u16 param_len;
+	__u16 data_len = 0;
+	u32 num_idents;
+
+	if (!sctp_auth_enable)
+		return -EACCES;
 
 	hmacs = sctp_sk(sk)->ep->auth_hmacs_list;
-	param_len = ntohs(hmacs->param_hdr.length);
+	data_len = ntohs(hmacs->param_hdr.length) - sizeof(sctp_paramhdr_t);
 
-	if (len < param_len)
+	if (len < sizeof(struct sctp_hmacalgo) + data_len)
 		return -EINVAL;
+
+	len = sizeof(struct sctp_hmacalgo) + data_len;
+	num_idents = data_len / sizeof(u16);
+
 	if (put_user(len, optlen))
 		return -EFAULT;
-	if (copy_to_user(optval, hmacs->hmac_ids, len))
+	if (put_user(num_idents, &p->shmac_num_idents))
+		return -EFAULT;
+	if (copy_to_user(p->shmac_idents, hmacs->hmac_ids, data_len))
 		return -EFAULT;
-
 	return 0;
 }
 
@@ -5219,6 +5244,9 @@ static int sctp_getsockopt_active_key(struct sock *sk, int len,
 	struct sctp_authkeyid val;
 	struct sctp_association *asoc;
 
+	if (!sctp_auth_enable)
+		return -EACCES;
+
 	if (len < sizeof(struct sctp_authkeyid))
 		return -EINVAL;
 	if (copy_from_user(&val, optval, sizeof(struct sctp_authkeyid)))
@@ -5233,6 +5261,12 @@ static int sctp_getsockopt_active_key(struct sock *sk, int len,
 	else
 		val.scact_keynumber = sctp_sk(sk)->ep->active_key_id;
 
+	len = sizeof(struct sctp_authkeyid);
+	if (put_user(len, optlen))
+		return -EFAULT;
+	if (copy_to_user(optval, &val, len))
+		return -EFAULT;
+
 	return 0;
 }
 
@@ -5243,13 +5277,16 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len,
 	struct sctp_authchunks val;
 	struct sctp_association *asoc;
 	struct sctp_chunks_param *ch;
-	u32    num_chunks;
+	u32    num_chunks = 0;
 	char __user *to;
 
-	if (len <= sizeof(struct sctp_authchunks))
+	if (!sctp_auth_enable)
+		return -EACCES;
+
+	if (len < sizeof(struct sctp_authchunks))
 		return -EINVAL;
 
-	if (copy_from_user(&val, p, sizeof(struct sctp_authchunks)))
+	if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks)))
 		return -EFAULT;
 
 	to = p->gauth_chunks;
@@ -5258,20 +5295,21 @@ static int sctp_getsockopt_peer_auth_chunks(struct sock *sk, int len,
 		return -EINVAL;
 
 	ch = asoc->peer.peer_chunks;
+	if (!ch)
+		goto num;
 
 	/* See if the user provided enough room for all the data */
 	num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
 	if (len < num_chunks)
 		return -EINVAL;
 
-	len = num_chunks;
-	if (put_user(len, optlen))
+	if (copy_to_user(to, ch->chunks, num_chunks))
 		return -EFAULT;
+num:
+	len = sizeof(struct sctp_authchunks) + num_chunks;
+	if (put_user(len, optlen)) return -EFAULT;
 	if (put_user(num_chunks, &p->gauth_number_of_chunks))
 		return -EFAULT;
-	if (copy_to_user(to, ch->chunks, len))
-		return -EFAULT;
-
 	return 0;
 }
 
@@ -5282,13 +5320,16 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len,
 	struct sctp_authchunks val;
 	struct sctp_association *asoc;
 	struct sctp_chunks_param *ch;
-	u32    num_chunks;
+	u32    num_chunks = 0;
 	char __user *to;
 
-	if (len <= sizeof(struct sctp_authchunks))
+	if (!sctp_auth_enable)
+		return -EACCES;
+
+	if (len < sizeof(struct sctp_authchunks))
 		return -EINVAL;
 
-	if (copy_from_user(&val, p, sizeof(struct sctp_authchunks)))
+	if (copy_from_user(&val, optval, sizeof(struct sctp_authchunks)))
 		return -EFAULT;
 
 	to = p->gauth_chunks;
@@ -5301,17 +5342,21 @@ static int sctp_getsockopt_local_auth_chunks(struct sock *sk, int len,
 	else
 		ch = sctp_sk(sk)->ep->auth_chunk_list;
 
+	if (!ch)
+		goto num;
+
 	num_chunks = ntohs(ch->param_hdr.length) - sizeof(sctp_paramhdr_t);
-	if (len < num_chunks)
+	if (len < sizeof(struct sctp_authchunks) + num_chunks)
 		return -EINVAL;
 
-	len = num_chunks;
+	if (copy_to_user(to, ch->chunks, num_chunks))
+		return -EFAULT;
+num:
+	len = sizeof(struct sctp_authchunks) + num_chunks;
 	if (put_user(len, optlen))
 		return -EFAULT;
 	if (put_user(num_chunks, &p->gauth_number_of_chunks))
 		return -EFAULT;
-	if (copy_to_user(to, ch->chunks, len))
-		return -EFAULT;
 
 	return 0;
 }
-- 
GitLab


From 7701e8c59b0e7cbcf21c1bc49d8b8c6db43027a4 Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Wed, 20 Aug 2008 21:07:47 +0200
Subject: [PATCH 250/869] x86, mmiotrace: silence section mismatch warning -
 leave_uniprocessor

WARNING: vmlinux.o(.text+0x180af): Section mismatch in reference from the function leave_uniprocessor() to the function .cpuinit.text:cpu_up()
The function leave_uniprocessor() references
the function __cpuinit cpu_up().
This is often because leave_uniprocessor lacks a __cpuinit
annotation or the annotation of cpu_up is wrong.

leave_uniprocessor calls cpu_up only when CONFIG_HOTPLUG_CPU is set,
so it can be safely annotated as __ref

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Pekka Paalanen <pq@iki.fi>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pekka Paalanen <pq@iki.fi>
---
 arch/x86/mm/mmio-mod.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/mm/mmio-mod.c b/arch/x86/mm/mmio-mod.c
index e7397e108be..635b50e8558 100644
--- a/arch/x86/mm/mmio-mod.c
+++ b/arch/x86/mm/mmio-mod.c
@@ -430,7 +430,9 @@ static void enter_uniprocessor(void)
 						"may miss events.\n");
 }
 
-static void leave_uniprocessor(void)
+/* __ref because leave_uniprocessor calls cpu_up which is __cpuinit,
+   but this whole function is ifdefed CONFIG_HOTPLUG_CPU */
+static void __ref leave_uniprocessor(void)
 {
 	int cpu;
 	int err;
-- 
GitLab


From 7946612de2087e163308e26034286fc2dc9dacf1 Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 20 Aug 2008 11:31:07 -0700
Subject: [PATCH 251/869] x86: export pv_lock_ops non-GPL

None of the spinlock API is exported GPL, so there's no reason for
pv_lock_ops to be.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: drago01 <drago01@gmail.com>
---
 arch/x86/kernel/paravirt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 94da4d52d79..300da17e61c 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -471,7 +471,7 @@ struct pv_lock_ops pv_lock_ops = {
 	.spin_unlock = __ticket_spin_unlock,
 #endif
 };
-EXPORT_SYMBOL_GPL(pv_lock_ops);
+EXPORT_SYMBOL(pv_lock_ops);
 
 EXPORT_SYMBOL_GPL(pv_time_ops);
 EXPORT_SYMBOL    (pv_cpu_ops);
-- 
GitLab


From b2a6a58ca6a3ddf4e278a53199c5b8fd39adbc0e Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Wed, 20 Aug 2008 18:18:26 +0200
Subject: [PATCH 252/869] x86: fix BUG: unable to handle kernel paging request
 (numaq_tsc_disable)

This section mismatch:

>> Seems to be a section mismatch; init_intel() is __cpuinit while
>> numaq_tsc_disable() is __init. Seems to be introduced in:
>>
>> commit 64898a8bad8c94ad7a4bd5cc86b66edfbb081f4a
>> Author: Yinghai Lu <yhlu.kernel@gmail.com>
>> Date:   Sat Jul 19 18:01:16 2008 -0700
>>
>>    x86: extend and use x86_quirks to clean up NUMAQ code
>
> Oops, I am wrong about numaq_tsc_disable() being __init. Still, I
> believe that Yinghai might be able to say what's really wrong :-)

Would lead to this crash:

  BUG: unable to handle kernel paging request at c08a45f0
  IP: [<c08a45f0>] numaq_tsc_disable+0x0/0x40

Fixed by the patch below.

Signed-off-by: Vegard Nossum <vegardno@ifi.uio.no>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/numaq_32.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index b8c45610b20..eecc8c18f01 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -73,7 +73,7 @@ static void __init smp_dump_qct(void)
 }
 
 
-void __init numaq_tsc_disable(void)
+void __cpuinit numaq_tsc_disable(void)
 {
 	if (!found_numaq)
 		return;
-- 
GitLab


From c15238df3b65e34fadb1021b0fb0d5aebc7c42c6 Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Wed, 20 Aug 2008 16:45:51 -0700
Subject: [PATCH 253/869] x86: PAT proper tracking of set_memory_uc and friends

Big thinko in pat memtype tracking code. reserve_memtype should be called
with physical address and not virtual address.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pageattr.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index f5f5154ea11..43e2f8483e4 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -849,7 +849,7 @@ int set_memory_uc(unsigned long addr, int numpages)
 	/*
 	 * for now UC MINUS. see comments in ioremap_nocache()
 	 */
-	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
 			    _PAGE_CACHE_UC_MINUS, NULL))
 		return -EINVAL;
 
@@ -868,7 +868,7 @@ int set_memory_wc(unsigned long addr, int numpages)
 	if (!pat_enabled)
 		return set_memory_uc(addr, numpages);
 
-	if (reserve_memtype(addr, addr + numpages * PAGE_SIZE,
+	if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
 		_PAGE_CACHE_WC, NULL))
 		return -EINVAL;
 
@@ -884,7 +884,7 @@ int _set_memory_wb(unsigned long addr, int numpages)
 
 int set_memory_wb(unsigned long addr, int numpages)
 {
-	free_memtype(addr, addr + numpages * PAGE_SIZE);
+	free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
 
 	return _set_memory_wb(addr, numpages);
 }
-- 
GitLab


From 28df82ebab79c6a2b4295dd94fd8de88196a49df Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Wed, 20 Aug 2008 16:45:52 -0700
Subject: [PATCH 254/869] devmem, x86: PAT Change /dev/mem mmap with O_SYNC to
 use UC_MINUS

All kernel mappings like ioremap(), etc uses UC_MINUS as the type. /dev/mem
mappings with /dev/mem being opened with O_SYNC however was using UC,
resulting in a conflict with /dev/mem mmap failing. This seems to be
affecting some apps (one being flashrom) which are using O_SYNC and which were
working before.

Switch /dev/mem with O_SYNC also to UC_MINUS.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pat.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index bb6e8a267bf..2a50e0fa64a 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -390,14 +390,6 @@ int free_memtype(u64 start, u64 end)
 }
 
 
-/*
- * /dev/mem mmap interface. The memtype used for mapping varies:
- * - Use UC for mappings with O_SYNC flag
- * - Without O_SYNC flag, if there is any conflict in reserve_memtype,
- *   inherit the memtype from existing mapping.
- * - Else use UC_MINUS memtype (for backward compatibility with existing
- *   X drivers.
- */
 pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t vma_prot)
 {
@@ -435,14 +427,14 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
 {
 	u64 offset = ((u64) pfn) << PAGE_SHIFT;
-	unsigned long flags = _PAGE_CACHE_UC_MINUS;
+	unsigned long flags = -1;
 	int retval;
 
 	if (!range_is_allowed(pfn, size))
 		return 0;
 
 	if (file->f_flags & O_SYNC) {
-		flags = _PAGE_CACHE_UC;
+		flags = _PAGE_CACHE_UC_MINUS;
 	}
 
 #ifdef CONFIG_X86_32
@@ -465,13 +457,14 @@ int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 #endif
 
 	/*
-	 * With O_SYNC, we can only take UC mapping. Fail if we cannot.
+	 * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
+	 *
 	 * Without O_SYNC, we want to get
 	 * - WB for WB-able memory and no other conflicting mappings
 	 * - UC_MINUS for non-WB-able memory with no other conflicting mappings
 	 * - Inherit from confliting mappings otherwise
 	 */
-	if (flags != _PAGE_CACHE_UC_MINUS) {
+	if (flags != -1) {
 		retval = reserve_memtype(offset, offset + size, flags, NULL);
 	} else {
 		retval = reserve_memtype(offset, offset + size, -1, &flags);
-- 
GitLab


From 8323444b5dba3fe55e56a95d20d8f55c1d6745af Mon Sep 17 00:00:00 2001
From: "venkatesh.pallipadi@intel.com" <venkatesh.pallipadi@intel.com>
Date: Wed, 20 Aug 2008 16:45:53 -0700
Subject: [PATCH 255/869] x86: PAT Update validate_pat_support for intel CPUs

Pentium III and Core Solo/Duo CPUs have an erratum
" Page with PAT set to WC while associated MTRR is UC may consolidate to UC "
which can result in WC setting in PAT to be ineffective. We will disable
PAT on such CPUs, so that we can continue to use MTRR WC setting.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/addon_cpuid_features.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c
index 84a8220a607..a6ef672adbb 100644
--- a/arch/x86/kernel/cpu/addon_cpuid_features.c
+++ b/arch/x86/kernel/cpu/addon_cpuid_features.c
@@ -56,9 +56,22 @@ void __cpuinit validate_pat_support(struct cpuinfo_x86 *c)
 
 	switch (c->x86_vendor) {
 	case X86_VENDOR_INTEL:
-		if (c->x86 == 0xF || (c->x86 == 6 && c->x86_model >= 15))
+		/*
+		 * There is a known erratum on Pentium III and Core Solo
+		 * and Core Duo CPUs.
+		 * " Page with PAT set to WC while associated MTRR is UC
+		 *   may consolidate to UC "
+		 * Because of this erratum, it is better to stick with
+		 * setting WC in MTRR rather than using PAT on these CPUs.
+		 *
+		 * Enable PAT WC only on P4, Core 2 or later CPUs.
+		 */
+		if (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 15))
 			return;
-		break;
+
+		pat_disable("PAT WC disabled due to known CPU erratum.");
+		return;
+
 	case X86_VENDOR_AMD:
 	case X86_VENDOR_CENTAUR:
 	case X86_VENDOR_TRANSMETA:
-- 
GitLab


From 2540e0511ea17e25831be543cdf9381e6209950d Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Thu, 21 Aug 2008 05:11:14 -0700
Subject: [PATCH 256/869] pkt_sched: Fix qdisc_watchdog() vs. dev_deactivate()
 race

dev_deactivate() can skip rescheduling of a qdisc by qdisc_watchdog()
or other timer calling netif_schedule() after dev_queue_deactivate().
We prevent this checking aliveness before scheduling the timer. Since
during deactivation the root qdisc is available only as qdisc_sleeping
additional accessor qdisc_root_sleeping() is created.

With feedback from Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/sch_generic.h | 5 +++++
 net/sched/sch_api.c       | 4 ++++
 net/sched/sch_cbq.c       | 4 ++++
 3 files changed, 13 insertions(+)

diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index 84d25f2e618..b1d2cfea89c 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -193,6 +193,11 @@ static inline struct Qdisc *qdisc_root(struct Qdisc *qdisc)
 	return qdisc->dev_queue->qdisc;
 }
 
+static inline struct Qdisc *qdisc_root_sleeping(struct Qdisc *qdisc)
+{
+	return qdisc->dev_queue->qdisc_sleeping;
+}
+
 /* The qdisc root lock is a mechanism by which to top level
  * of a qdisc tree can be locked from any qdisc node in the
  * forest.  This allows changing the configuration of some
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index ef0efeca635..45f442d7de4 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -444,6 +444,10 @@ void qdisc_watchdog_schedule(struct qdisc_watchdog *wd, psched_time_t expires)
 {
 	ktime_t time;
 
+	if (test_bit(__QDISC_STATE_DEACTIVATED,
+		     &qdisc_root_sleeping(wd->qdisc)->state))
+		return;
+
 	wd->qdisc->flags |= TCQ_F_THROTTLED;
 	time = ktime_set(0, 0);
 	time = ktime_add_ns(time, PSCHED_US2NS(expires));
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 47ef492c4ff..8fa90d68ec6 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -521,6 +521,10 @@ static void cbq_ovl_delay(struct cbq_class *cl)
 	struct cbq_sched_data *q = qdisc_priv(cl->qdisc);
 	psched_tdiff_t delay = cl->undertime - q->now;
 
+	if (test_bit(__QDISC_STATE_DEACTIVATED,
+		     &qdisc_root_sleeping(cl->qdisc)->state))
+		return;
+
 	if (!cl->delayed) {
 		psched_time_t sched = q->now;
 		ktime_t expires;
-- 
GitLab


From 2bb2e1db906e6e139636271d2cf46466d9e84005 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Thu, 21 Aug 2008 07:11:30 -0500
Subject: [PATCH 257/869] powerpc: Update defconfigs for FSL PPC boards

Since we are updated defconfigs I went ahead and moved the
asp8347_defconfig under 83xx/ and the mpc8536_ds_defconfig under
85xx/ as that is where they should have been to start with.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
 .../configs/{ => 83xx}/asp8347_defconfig      | 312 +++++++++-----
 .../configs/83xx/mpc8313_rdb_defconfig        | 188 +++++++--
 .../configs/83xx/mpc8315_rdb_defconfig        | 188 +++++++--
 .../configs/83xx/mpc832x_mds_defconfig        | 172 ++++++--
 .../configs/83xx/mpc832x_rdb_defconfig        | 176 ++++++--
 .../configs/83xx/mpc834x_itx_defconfig        | 175 ++++++--
 .../configs/83xx/mpc834x_itxgp_defconfig      | 172 ++++++--
 .../configs/83xx/mpc834x_mds_defconfig        | 168 ++++++--
 .../configs/83xx/mpc836x_mds_defconfig        | 172 ++++++--
 .../configs/83xx/mpc836x_rdk_defconfig        | 183 +++++---
 .../configs/83xx/mpc837x_mds_defconfig        | 351 ++++++++++++++--
 .../configs/83xx/mpc837x_rdb_defconfig        | 340 +++++++++++++--
 arch/powerpc/configs/83xx/sbc834x_defconfig   | 239 +++++++++--
 arch/powerpc/configs/85xx/ksi8560_defconfig   |  95 +++--
 .../configs/{ => 85xx}/mpc8536_ds_defconfig   | 167 ++++----
 .../configs/85xx/mpc8540_ads_defconfig        |  71 +++-
 .../powerpc/configs/85xx/mpc8544_ds_defconfig | 178 ++++----
 .../configs/85xx/mpc8560_ads_defconfig        |  98 +++--
 .../powerpc/configs/85xx/mpc8568mds_defconfig | 121 ++++--
 .../powerpc/configs/85xx/mpc8572_ds_defconfig | 177 ++++----
 .../configs/85xx/mpc85xx_cds_defconfig        |  85 ++--
 arch/powerpc/configs/85xx/sbc8548_defconfig   |  63 ++-
 arch/powerpc/configs/85xx/sbc8560_defconfig   |  69 +++-
 arch/powerpc/configs/85xx/stx_gp3_defconfig   | 163 +++++---
 arch/powerpc/configs/85xx/tqm8540_defconfig   | 112 +++--
 arch/powerpc/configs/85xx/tqm8541_defconfig   | 139 +++++--
 arch/powerpc/configs/85xx/tqm8548_defconfig   | 129 ++++--
 arch/powerpc/configs/85xx/tqm8555_defconfig   | 139 +++++--
 arch/powerpc/configs/85xx/tqm8560_defconfig   | 139 +++++--
 arch/powerpc/configs/adder875_defconfig       |  55 ++-
 arch/powerpc/configs/c2k_defconfig            | 245 +++++------
 arch/powerpc/configs/ep8248e_defconfig        | 198 +++++++--
 arch/powerpc/configs/ep88xc_defconfig         |  57 ++-
 arch/powerpc/configs/linkstation_defconfig    | 133 ++++--
 arch/powerpc/configs/mpc7448_hpc2_defconfig   |  72 +++-
 arch/powerpc/configs/mpc8272_ads_defconfig    | 132 ++++--
 arch/powerpc/configs/mpc83xx_defconfig        | 389 ++++++++++++++++--
 arch/powerpc/configs/mpc85xx_defconfig        | 207 ++++++----
 arch/powerpc/configs/mpc8610_hpcd_defconfig   | 165 ++++----
 arch/powerpc/configs/mpc8641_hpcn_defconfig   | 215 ++++++----
 arch/powerpc/configs/mpc866_ads_defconfig     |  61 ++-
 arch/powerpc/configs/mpc885_ads_defconfig     |  57 ++-
 arch/powerpc/configs/pq2fads_defconfig        | 147 +++++--
 arch/powerpc/configs/prpmc2800_defconfig      | 125 ++++--
 arch/powerpc/configs/sbc8641d_defconfig       | 173 ++++++--
 arch/powerpc/configs/storcenter_defconfig     | 113 +++--
 46 files changed, 5367 insertions(+), 1958 deletions(-)
 rename arch/powerpc/configs/{ => 83xx}/asp8347_defconfig (87%)
 rename arch/powerpc/configs/{ => 85xx}/mpc8536_ds_defconfig (95%)

diff --git a/arch/powerpc/configs/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
similarity index 87%
rename from arch/powerpc/configs/asp8347_defconfig
rename to arch/powerpc/configs/83xx/asp8347_defconfig
index 60bb4d106c8..5e6780a088c 100644
--- a/arch/powerpc/configs/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Tue May  6 02:21:00 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:01 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,6 +32,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -50,6 +54,9 @@ CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -92,6 +99,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -109,24 +117,33 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,38 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 CONFIG_ASP834x=y
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -192,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -202,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -212,13 +241,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -226,10 +259,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -239,6 +275,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -248,15 +285,11 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -300,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -363,6 +394,7 @@ CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -434,9 +466,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -453,12 +487,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -476,12 +512,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +547,8 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -525,7 +566,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -535,14 +575,14 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -551,6 +591,7 @@ CONFIG_GIANFAR=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -606,6 +647,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -625,16 +667,17 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -643,16 +686,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -660,50 +701,70 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -713,6 +774,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -757,6 +819,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -764,7 +827,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -786,13 +851,25 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -810,10 +887,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -831,16 +904,21 @@ CONFIG_USB=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -851,6 +929,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -865,7 +944,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -878,7 +956,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -894,18 +971,16 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 # CONFIG_RTC_DEBUG is not set
@@ -933,6 +1008,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -953,11 +1029,8 @@ CONFIG_RTC_DRV_DS1374=y
 #
 # on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -977,7 +1050,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -1036,6 +1108,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1046,15 +1119,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1126,8 +1197,10 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1146,6 +1219,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1154,7 +1228,18 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1164,51 +1249,86 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 5428f9f5ed8..2028337868b 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:21 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:17 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC831x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -260,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -452,9 +478,11 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -471,12 +499,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -553,7 +583,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -570,12 +603,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -602,6 +638,8 @@ CONFIG_CICADA_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -638,7 +676,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -652,9 +689,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -752,11 +790,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -768,43 +809,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -828,11 +896,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -841,6 +913,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -886,6 +959,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -893,7 +967,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -915,8 +991,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -949,10 +1027,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -986,6 +1060,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1009,6 +1084,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1037,6 +1113,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1045,7 +1122,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1058,7 +1134,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1085,7 +1160,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1103,6 +1178,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1138,10 +1214,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1240,6 +1319,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1250,14 +1330,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1297,6 +1376,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1323,6 +1403,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1340,19 +1422,32 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1406,6 +1501,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1438,5 +1537,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 9bc3a03ae26..dd80eb0a87a 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:21 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC831x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -260,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -452,9 +478,11 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -471,12 +499,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -554,7 +584,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -631,12 +664,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -663,6 +699,8 @@ CONFIG_PHYLIB=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -699,7 +737,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -713,9 +750,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -813,11 +851,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -829,43 +870,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -889,11 +957,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -902,6 +974,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -947,6 +1020,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -954,7 +1028,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -976,8 +1052,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1010,10 +1088,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1047,6 +1121,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1070,6 +1145,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1098,6 +1174,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1106,7 +1183,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1119,7 +1195,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1146,7 +1221,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
@@ -1164,6 +1239,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1199,10 +1275,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1301,6 +1380,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1311,14 +1391,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1358,6 +1437,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1384,6 +1464,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1401,19 +1483,32 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1467,6 +1562,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1499,5 +1598,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 1eca26f3659..bdf50c8a17e 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:22 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 CONFIG_MPC832x_MDS=y
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC832x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -196,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,6 +231,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +244,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +252,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,10 +260,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +291,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -365,6 +391,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -380,12 +407,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -462,7 +491,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -470,12 +502,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -502,6 +537,8 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -519,7 +556,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -534,12 +570,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -628,12 +665,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -645,42 +685,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -689,10 +756,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -702,6 +772,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -746,6 +817,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -753,7 +825,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -770,8 +844,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -803,10 +879,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -820,6 +892,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -859,6 +935,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -947,6 +1024,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -957,14 +1035,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -994,6 +1071,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1002,6 +1080,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1027,8 +1106,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1082,6 +1171,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1114,6 +1207,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index de95d327463..4eef8c95480 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:24 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:19 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 CONFIG_MPC832x_RDB=y
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC832x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -196,7 +220,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -207,6 +231,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +244,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +252,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,10 +260,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +291,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -362,9 +388,11 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -381,12 +409,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -463,7 +493,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -471,12 +504,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -503,6 +539,8 @@ CONFIG_ICPLUS_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -520,10 +558,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -538,12 +574,13 @@ CONFIG_E1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-CONFIG_UGETH_NAPI=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -641,12 +678,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -660,43 +700,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -719,11 +786,15 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -732,6 +803,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -777,6 +849,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -784,7 +857,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -806,8 +881,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -840,10 +917,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -877,6 +950,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -928,6 +1002,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -936,7 +1011,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -949,7 +1023,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1063,6 +1136,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1073,14 +1147,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1154,6 +1227,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1162,6 +1236,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
@@ -1187,8 +1262,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1242,6 +1327,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1274,6 +1363,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index b47fc918570..8d651393185 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:25 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:20 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -439,9 +465,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -458,18 +486,17 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -545,7 +572,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -623,12 +653,15 @@ CONFIG_MD_RAID1=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -659,7 +692,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -673,9 +705,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -753,11 +786,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -769,43 +805,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -828,10 +891,13 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -839,7 +905,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -861,8 +929,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -895,10 +965,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -917,6 +983,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -960,6 +1027,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -968,7 +1036,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -981,7 +1048,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1035,10 +1101,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1130,6 +1199,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1140,14 +1210,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1226,6 +1295,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1251,8 +1321,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1306,6 +1386,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1338,5 +1422,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index fdac4845bad..a8afa39d6f7 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 CONFIG_MPC834x_ITX=y
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -439,9 +465,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -458,12 +486,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -540,7 +570,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -548,12 +581,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -584,7 +620,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -598,9 +633,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -678,11 +714,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -694,43 +733,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -753,10 +819,13 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -764,7 +833,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -786,8 +857,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -820,10 +893,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -842,6 +911,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -885,6 +955,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -893,7 +964,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -906,7 +976,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -959,10 +1028,13 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1054,6 +1126,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1064,14 +1137,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1150,6 +1222,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1175,8 +1248,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1230,6 +1313,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1262,5 +1349,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index c82e96e984f..24c320a3667 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:21 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,37 +161,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 CONFIG_MPC834x_MDS=y
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +389,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -378,12 +405,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -401,12 +430,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -433,6 +465,8 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -468,7 +502,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -482,9 +515,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -572,11 +606,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
@@ -588,42 +625,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -632,10 +696,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -645,6 +712,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -689,6 +757,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -696,7 +765,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -713,8 +784,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -746,10 +819,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -763,6 +832,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -802,6 +875,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -890,6 +964,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -900,14 +975,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -943,6 +1017,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -968,8 +1043,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1023,6 +1108,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1055,5 +1144,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 20fd9f58cf4..e029e9e1462 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:27 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:22 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -111,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -125,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,36 +161,48 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 CONFIG_MPC836x_MDS=y
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -195,7 +219,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -205,6 +229,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -217,6 +242,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +250,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -231,10 +258,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +389,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -378,12 +405,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -460,7 +489,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -468,12 +500,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -500,6 +535,8 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -517,7 +554,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -532,12 +568,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -626,12 +663,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -643,42 +683,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -687,10 +754,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -700,6 +770,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -744,6 +815,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -751,7 +823,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -768,8 +842,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -801,10 +877,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -818,6 +890,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -857,6 +933,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -945,6 +1022,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -955,14 +1033,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -992,6 +1069,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1000,6 +1078,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1025,8 +1104,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1080,6 +1169,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1112,6 +1205,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index d2c435f0da4..7d674be702f 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Mon May 19 21:12:32 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:24 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -52,6 +54,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -89,12 +94,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,16 +162,18 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
@@ -170,17 +184,26 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -207,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -219,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,12 +259,15 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
 CONFIG_FSL_LBC=y
 CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -263,10 +292,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -359,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -449,9 +476,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -467,12 +496,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -490,12 +521,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -526,7 +560,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -541,12 +574,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
-CONFIG_UGETH_NAPI=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -602,6 +636,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -625,12 +660,15 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_SERIAL_QE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -643,43 +681,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -703,26 +768,33 @@ CONFIG_SPI_MPC83xx=y
 # CONFIG_SPI_AT25 is not set
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -730,7 +802,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -747,9 +821,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -799,6 +874,9 @@ CONFIG_FB_MACMODES=y
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
 # CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
@@ -821,6 +899,7 @@ CONFIG_FB_OF=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_FSL_DIU is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -846,10 +925,6 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -941,6 +1016,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -951,14 +1027,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -998,6 +1073,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1025,12 +1101,22 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 CONFIG_PPC_EARLY_DEBUG=y
 # CONFIG_PPC_EARLY_DEBUG_LPAR is not set
 # CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL=y
 # CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
 # CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
 # CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
@@ -1091,6 +1177,10 @@ CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1123,6 +1213,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index 0f94d9f56be..de472022aa8 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:28 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:23 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +93,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,37 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 CONFIG_MPC837x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -206,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -218,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,15 +259,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -360,19 +390,30 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -415,24 +456,128 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -452,16 +597,56 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -470,8 +655,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -515,12 +703,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -531,40 +721,90 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -573,10 +813,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -586,8 +829,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -609,13 +854,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -626,6 +874,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -633,7 +882,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Sonics Silicon Backplane
@@ -644,8 +901,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -666,6 +925,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -675,10 +936,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -686,12 +943,16 @@ CONFIG_HID=y
 # CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -700,6 +961,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -769,6 +1031,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -779,14 +1042,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -826,6 +1088,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -849,8 +1112,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -904,6 +1177,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -935,5 +1212,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 0d448556f53..e8d2d691d26 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Tue Jun 10 09:17:12 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:25 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +93,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +117,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +137,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,37 +162,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 CONFIG_MPC837x_RDB=y
 # CONFIG_SBC834x is not set
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -206,6 +230,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -218,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +251,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,15 +259,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -256,10 +290,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -355,10 +385,16 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -366,9 +402,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -411,14 +452,106 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -430,15 +563,27 @@ CONFIG_MD_RAID5_RESHAPE=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -458,16 +603,44 @@ CONFIG_FIXED_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -485,8 +658,11 @@ CONFIG_GFAR_NAPI=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -530,12 +706,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -546,41 +724,91 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -589,10 +817,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -602,8 +833,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -625,13 +858,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -642,6 +878,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -649,7 +886,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # USB-based Watchdog Cards
@@ -665,8 +910,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -688,6 +935,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -697,10 +946,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -716,7 +961,7 @@ CONFIG_USB_HID=y
 # CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
@@ -731,6 +976,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -743,6 +989,8 @@ CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
@@ -768,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -781,7 +1028,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -803,6 +1049,7 @@ CONFIG_USB_MON=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -872,6 +1119,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -882,14 +1130,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -929,6 +1176,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -952,8 +1200,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1011,6 +1269,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1042,5 +1304,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index 1752918be2c..9245a67da20 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:30 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:27 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -51,6 +53,9 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,12 +93,12 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -110,10 +115,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,12 +135,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -148,37 +160,49 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 # CONFIG_MPC831x_RDB is not set
 # CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC832x_RDB is not set
 # CONFIG_MPC834x_MDS is not set
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC836x_RDK is not set
 # CONFIG_MPC837x_MDS is not set
 # CONFIG_MPC837x_RDB is not set
 CONFIG_SBC834x=y
+# CONFIG_ASP834x is not set
 CONFIG_PPC_MPC834x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -204,6 +228,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -216,6 +241,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +249,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -230,15 +257,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -254,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -358,19 +388,30 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -383,15 +424,27 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -411,16 +464,44 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -429,6 +510,8 @@ CONFIG_GIANFAR=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NETCONSOLE is not set
@@ -474,12 +557,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -490,40 +575,90 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -532,10 +667,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -545,8 +683,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -568,13 +708,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -585,6 +728,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -592,7 +736,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # Sonics Silicon Backplane
@@ -603,8 +755,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -625,6 +779,8 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -634,10 +790,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -648,6 +800,7 @@ CONFIG_HID=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -710,6 +863,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -720,14 +874,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -740,6 +893,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
@@ -751,6 +905,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -774,8 +929,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -829,6 +994,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index b82bb042308..8bb89f26a20 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:30 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:28 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -85,7 +88,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -110,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -124,6 +132,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -142,8 +151,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -152,11 +159,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -173,7 +182,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -213,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -220,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -229,6 +239,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -250,10 +261,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -427,6 +434,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -440,12 +448,12 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -463,11 +471,8 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -480,7 +485,6 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -504,6 +508,7 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -516,9 +521,7 @@ CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_FCC=y
 CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -606,6 +609,23 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -622,6 +642,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -633,8 +654,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -664,10 +687,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -680,6 +699,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -759,6 +782,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -768,12 +792,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -809,6 +832,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -833,6 +857,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -851,17 +877,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -915,6 +953,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -946,6 +988,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
similarity index 95%
rename from arch/powerpc/configs/mpc8536_ds_defconfig
rename to arch/powerpc/configs/85xx/mpc8536_ds_defconfig
index f1e2931de5d..6b516bea6e7 100644
--- a/arch/powerpc/configs/mpc8536_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Wed Jul  2 01:34:26 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:18:18 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -119,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -205,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -228,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -235,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -246,6 +253,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -272,10 +280,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -401,6 +405,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -427,12 +433,14 @@ CONFIG_BLK_DEV_RAM_SIZE=524288
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -512,6 +520,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -588,7 +597,6 @@ CONFIG_SATA_SIL=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -632,7 +640,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -648,9 +655,9 @@ CONFIG_SKY2=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -727,12 +734,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -766,7 +775,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -776,43 +785,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -821,6 +851,8 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -836,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -879,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -925,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -992,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1012,19 +1040,15 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1086,39 +1110,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1150,6 +1147,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1201,6 +1199,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1209,7 +1208,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1222,7 +1220,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1310,6 +1307,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1387,6 +1385,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1399,17 +1398,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1488,6 +1486,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1513,6 +1512,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1531,19 +1532,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -1561,13 +1572,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1601,6 +1613,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1633,5 +1649,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index f33fd516fd5..1ea181f826f 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:31 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:30 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +115,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +135,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +154,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +162,13 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -192,7 +200,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -231,6 +241,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -252,10 +263,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -367,6 +374,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -384,7 +392,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -416,9 +423,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -504,6 +509,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -520,6 +527,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -531,8 +539,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -562,10 +572,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -578,6 +584,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -655,6 +665,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -664,12 +675,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -705,6 +715,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -729,6 +740,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -746,16 +759,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -808,6 +834,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -839,5 +869,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index a0583e5119f..1aecdeab984 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:32 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:20:43 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +172,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 CONFIG_MPC85xx_DS=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -202,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -244,6 +254,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -270,10 +281,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,6 +406,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -425,12 +434,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -510,6 +521,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -577,12 +589,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -626,7 +641,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -640,9 +654,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -719,12 +733,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -758,7 +774,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -768,43 +784,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -813,10 +850,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -828,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -871,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -917,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -984,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1006,19 +1042,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1080,39 +1112,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1144,6 +1149,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1195,6 +1201,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1203,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1216,7 +1222,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1270,6 +1275,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1303,6 +1309,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1379,6 +1386,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1391,17 +1399,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1480,6 +1487,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1505,6 +1513,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1523,17 +1533,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1550,13 +1572,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1590,6 +1613,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1622,5 +1649,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index e19592b4204..06e26d906f6 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:33 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:32 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +136,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +155,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +163,13 @@ CONFIG_MPC85xx=y
 CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -177,7 +186,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -217,6 +225,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +233,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -235,6 +245,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -261,10 +272,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -363,6 +370,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -381,12 +389,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -404,12 +414,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -456,10 +469,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -473,9 +484,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -582,6 +593,24 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -602,6 +631,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -613,8 +643,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -646,10 +678,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -663,6 +691,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -741,6 +773,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -750,12 +783,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -791,6 +823,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -815,6 +848,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -832,17 +867,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -895,6 +942,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -927,6 +978,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
index 28004e93aee..dc27c74955f 100644
--- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:34 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:33 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -112,10 +113,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +133,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,8 +158,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -160,11 +166,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 CONFIG_MPC85xx_MDS=y
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -197,7 +205,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -220,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -227,6 +236,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -238,6 +248,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -264,10 +275,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -385,12 +392,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -468,6 +477,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -475,12 +485,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -524,7 +537,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -538,10 +550,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -648,42 +660,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -692,10 +725,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -749,6 +785,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -756,6 +793,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_BOOKE_WDT is not set
 
 #
@@ -773,8 +811,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -806,10 +846,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -823,6 +859,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -862,6 +902,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -950,6 +991,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -960,14 +1002,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -995,6 +1036,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1003,6 +1045,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1027,6 +1070,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1044,17 +1089,28 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
@@ -1122,6 +1178,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1154,6 +1214,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 164fd9606ee..eda45bb8a13 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:35 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:21:42 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +164,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +172,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 CONFIG_MPC85xx_DS=y
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -202,7 +210,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +233,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +241,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -244,6 +254,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -270,10 +281,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,6 +406,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -425,12 +434,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -510,6 +521,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -577,12 +589,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -626,7 +641,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -640,9 +654,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -719,12 +733,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -758,7 +774,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
@@ -768,43 +784,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -813,10 +850,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -828,8 +868,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -871,6 +913,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -917,6 +960,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -984,15 +1028,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1006,19 +1042,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1080,39 +1112,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1144,6 +1149,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1195,6 +1201,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1203,7 +1210,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1216,7 +1222,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1270,6 +1275,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1368,6 +1374,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1380,17 +1387,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1469,6 +1475,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1494,6 +1501,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1512,17 +1521,29 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1539,13 +1560,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1579,6 +1601,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1611,5 +1637,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index b09f0032a10..97f3c4fe440 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:36 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:34 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -114,10 +115,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -128,6 +135,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -146,8 +154,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -156,11 +162,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -192,7 +200,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -233,6 +243,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -259,10 +270,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -379,20 +386,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 # CONFIG_BLK_DEV_IDEDISK is not set
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -405,7 +414,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -423,10 +431,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -444,8 +450,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -461,12 +465,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,10 +516,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -526,9 +531,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -634,6 +639,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -654,6 +661,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -665,8 +673,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -698,10 +708,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -715,6 +721,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -793,6 +803,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -802,12 +813,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -843,6 +853,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -867,6 +878,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -884,16 +897,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -946,6 +972,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -978,5 +1008,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 24f7f44b482..41cedc4b63f 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:37 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:35 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -112,10 +113,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +133,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +152,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +160,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 CONFIG_SBC8548=y
@@ -213,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -220,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -231,6 +241,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -256,10 +267,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -374,12 +381,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -397,12 +406,15 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -446,7 +458,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -460,9 +471,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -568,6 +579,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -588,6 +601,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -599,8 +613,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -632,10 +648,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -706,6 +718,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -715,12 +728,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -744,6 +756,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -767,7 +780,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -819,6 +841,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -851,5 +877,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 655518dcd73..daef36f41b4 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:38 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:36 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -113,10 +114,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -127,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -155,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -214,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -221,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -230,6 +240,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
@@ -251,10 +262,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -366,6 +373,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -383,7 +391,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -415,9 +422,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 CONFIG_NETDEV_10000=y
 
 #
@@ -501,6 +506,8 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -517,6 +524,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -528,8 +536,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -559,10 +569,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -575,6 +581,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -679,6 +689,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -688,12 +699,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -729,6 +739,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -753,6 +764,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -769,16 +782,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_PPC_EARLY_DEBUG=y
@@ -842,6 +868,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -873,5 +903,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index 7804ca1ecc9..2b05d43f8f7 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:38 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -115,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -134,6 +142,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -152,8 +161,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -162,11 +169,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -183,7 +192,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -223,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -230,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -241,6 +251,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -267,10 +278,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -426,6 +433,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=m
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
@@ -452,15 +460,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -480,7 +489,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 
 #
@@ -493,10 +501,8 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -514,8 +520,6 @@ CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -594,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -601,12 +606,15 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -652,7 +660,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -666,9 +673,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -731,6 +738,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -741,7 +749,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -757,6 +767,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -805,44 +816,68 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -850,10 +885,32 @@ CONFIG_I2C_CHARDEV=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -907,6 +964,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -918,8 +976,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -958,20 +1018,8 @@ CONFIG_DRM=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -985,6 +1033,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -1070,6 +1122,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=m
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1080,13 +1133,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1150,6 +1202,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1175,6 +1228,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1193,18 +1248,29 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1258,6 +1324,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1290,6 +1360,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index e0b5559e84a..1b2d5d57791 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:39 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:37 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -89,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +113,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +133,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +152,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +160,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -214,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -221,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -232,6 +242,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -255,10 +266,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -449,20 +456,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -475,7 +484,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -493,10 +501,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -514,8 +520,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -531,12 +535,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -598,7 +605,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -612,9 +618,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -721,41 +727,62 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -764,10 +791,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -821,6 +851,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -832,8 +863,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -865,10 +898,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -882,6 +911,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -971,6 +1004,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -980,12 +1014,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1021,6 +1054,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1048,7 +1082,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1100,6 +1143,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1132,5 +1179,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 6f9067b49e0..da841a09755 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:40 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:39 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 CONFIG_TQM8541=y
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -893,6 +944,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index b3b770be3cc..ca1234d2685 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Thu Jun 26 14:40:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:40 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -116,10 +116,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -130,12 +136,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -154,8 +161,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -164,6 +169,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
@@ -187,7 +193,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_CPM2 is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -203,7 +208,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -226,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -233,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -244,7 +251,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
-CONFIG_FSL_LBC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -273,10 +280,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -455,7 +458,6 @@ CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_NAND_FSL_ELBC is not set
-CONFIG_MTD_NAND_FSL_UPM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -490,20 +492,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 # CONFIG_BLK_DEV_IDEDISK is not set
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -516,7 +520,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -534,10 +537,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -555,8 +556,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -572,12 +571,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -620,10 +622,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -637,9 +637,9 @@ CONFIG_E1000_NAPI=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -744,42 +744,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -788,10 +809,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -845,6 +869,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -856,8 +881,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -889,10 +916,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -906,6 +929,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -945,6 +972,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1031,9 +1059,11 @@ CONFIG_TMPFS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1043,12 +1073,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1084,6 +1113,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1108,6 +1138,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1125,17 +1157,29 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1189,6 +1233,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1221,5 +1269,6 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 03120b5b52f..dcf9cfe28b5 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:41 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:42 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 CONFIG_TQM8555=y
 # CONFIG_TQM8560 is not set
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -893,6 +944,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index 3113257edf5..8d676629cdb 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:42 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:43 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -89,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
@@ -112,10 +114,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +134,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -144,8 +153,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -154,11 +161,13 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 # CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_KSI8560 is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
 # CONFIG_TQM8555 is not set
 CONFIG_TQM8560=y
 # CONFIG_SBC8548 is not set
@@ -176,7 +185,6 @@ CONFIG_MPIC=y
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -216,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -223,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -234,6 +244,7 @@ CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -257,10 +268,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -432,6 +439,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -451,20 +459,22 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -477,7 +487,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -495,10 +504,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +523,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -533,12 +538,15 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -601,7 +609,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -615,9 +622,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -732,42 +739,66 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -775,10 +806,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -832,6 +884,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_W83627EHF is not set
 CONFIG_HWMON_DEBUG_CHIP=y
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -843,8 +896,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -876,10 +931,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -893,6 +944,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -982,6 +1037,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -991,12 +1047,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1032,6 +1087,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1059,8 +1115,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB_CONSOLE is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1112,6 +1176,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1144,6 +1212,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 6740f2a3aa3..63cd51fbb4b 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:08 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:00 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -109,10 +110,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -122,6 +129,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -140,8 +148,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -159,6 +165,7 @@ CONFIG_PPC_ADDER875=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -177,7 +184,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -218,6 +224,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -225,6 +232,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -257,10 +265,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -443,7 +447,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -547,6 +550,7 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -587,6 +591,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -602,8 +608,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -633,10 +641,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -706,6 +710,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -716,13 +721,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -761,6 +765,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -785,6 +790,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -800,16 +807,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
@@ -822,6 +841,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index dc599c7e97d..c16521ffb47 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Thu May 15 11:00:14 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:02 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -97,7 +98,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -124,11 +124,17 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -145,6 +151,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -164,19 +171,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
@@ -253,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -260,6 +267,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_SECCOMP=y
@@ -301,10 +309,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -318,6 +322,7 @@ CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -349,7 +354,7 @@ CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -472,6 +477,7 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -495,6 +501,7 @@ CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
 
 #
 # Bridge: Netfilter Configuration
@@ -507,6 +514,7 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+# CONFIG_BRIDGE_EBT_IP6 is not set
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -535,8 +543,10 @@ CONFIG_ATM_LANE=m
 # CONFIG_ATM_MPOA is not set
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -556,7 +566,6 @@ CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -601,7 +610,6 @@ CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=m
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_CMTP=m
 CONFIG_BT_HIDP=m
 
 #
@@ -609,6 +617,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -625,6 +634,7 @@ CONFIG_FIB_RULES=y
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
@@ -645,6 +655,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -749,6 +761,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -844,6 +857,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -851,12 +865,15 @@ CONFIG_SCSI_LPFC=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -900,7 +917,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -916,6 +932,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -940,112 +957,13 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 CONFIG_NETCONSOLE=m
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
-CONFIG_ISDN=m
-CONFIG_ISDN_I4L=m
-CONFIG_ISDN_PPP=y
-CONFIG_ISDN_PPP_VJ=y
-CONFIG_ISDN_MPP=y
-CONFIG_IPPP_FILTER=y
-# CONFIG_ISDN_PPP_BSDCOMP is not set
-CONFIG_ISDN_AUDIO=y
-CONFIG_ISDN_TTY_FAX=y
-
-#
-# ISDN feature submodules
-#
-CONFIG_ISDN_DRV_LOOP=m
-# CONFIG_ISDN_DIVERSION is not set
-
-#
-# ISDN4Linux hardware drivers
-#
-
-#
-# Passive cards
-#
-CONFIG_ISDN_DRV_HISAX=m
-
-#
-# D-channel protocol features
-#
-CONFIG_HISAX_EURO=y
-CONFIG_DE_AOC=y
-CONFIG_HISAX_NO_SENDCOMPLETE=y
-CONFIG_HISAX_NO_LLC=y
-CONFIG_HISAX_NO_KEYPAD=y
-CONFIG_HISAX_1TR6=y
-CONFIG_HISAX_NI1=y
-CONFIG_HISAX_MAX_CARDS=8
-
-#
-# HiSax supported cards
-#
-CONFIG_HISAX_16_3=y
-CONFIG_HISAX_S0BOX=y
-CONFIG_HISAX_FRITZPCI=y
-CONFIG_HISAX_AVM_A1_PCMCIA=y
-CONFIG_HISAX_ELSA=y
-CONFIG_HISAX_DIEHLDIVA=y
-CONFIG_HISAX_SEDLBAUER=y
-CONFIG_HISAX_NICCY=y
-CONFIG_HISAX_BKM_A4T=y
-CONFIG_HISAX_SCT_QUADRO=y
-CONFIG_HISAX_GAZEL=y
-CONFIG_HISAX_W6692=y
-CONFIG_HISAX_HFC_SX=y
-# CONFIG_HISAX_DEBUG is not set
-
-#
-# HiSax PCMCIA card service modules
-#
-
-#
-# HiSax sub driver modules
-#
-CONFIG_HISAX_ST5481=m
-CONFIG_HISAX_HFCUSB=m
-# CONFIG_HISAX_HFC4S8S is not set
-CONFIG_HISAX_FRITZ_PCIPNP=m
-CONFIG_HISAX_HDLC=y
-
-#
-# Active cards
-#
-CONFIG_HYSDN=m
-CONFIG_HYSDN_CAPI=y
-# CONFIG_ISDN_DRV_GIGASET is not set
-CONFIG_ISDN_CAPI=m
-CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
-CONFIG_CAPI_TRACE=y
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-CONFIG_ISDN_CAPI_CAPI20=m
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-CONFIG_ISDN_CAPI_CAPIFS=m
-CONFIG_ISDN_CAPI_CAPIDRV=m
-
-#
-# CAPI hardware drivers
-#
-CONFIG_CAPI_AVM=y
-CONFIG_ISDN_DRV_AVMB1_B1PCI=m
-CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
-CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
-CONFIG_ISDN_DRV_AVMB1_T1PCI=m
-CONFIG_ISDN_DRV_AVMB1_C4=m
-CONFIG_CAPI_EICON=y
-CONFIG_ISDN_DIVAS=m
-CONFIG_ISDN_DIVAS_BRIPCI=y
-CONFIG_ISDN_DIVAS_PRIPCI=y
-CONFIG_ISDN_DIVAS_DIVACAPI=m
-CONFIG_ISDN_DIVAS_USERIDI=m
-CONFIG_ISDN_DIVAS_MAINT=m
+# CONFIG_ISDN is not set
 # CONFIG_PHONE is not set
 
 #
@@ -1092,6 +1010,7 @@ CONFIG_INPUT_UINPUT=m
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1145,44 +1064,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+CONFIG_I2C_MV64XXX=m
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=m
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 CONFIG_SENSORS_PCF8591=m
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1191,10 +1131,13 @@ CONFIG_SENSORS_PCF8591=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=m
 CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
@@ -1255,6 +1198,7 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_MV64X60_WDT is not set
 
 #
@@ -1278,8 +1222,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1290,6 +1236,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1316,10 +1263,6 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_HID=m
@@ -1339,6 +1282,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1362,11 +1306,16 @@ CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # USB Device Class drivers
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1388,6 +1337,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1396,7 +1346,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1405,7 +1354,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1443,6 +1391,7 @@ CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_OTI6858 is not set
@@ -1464,7 +1413,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-CONFIG_USB_AUERSWALD=m
 CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
@@ -1481,6 +1429,7 @@ CONFIG_USB_LED=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_ATM=m
 CONFIG_USB_SPEEDTOUCH=m
 # CONFIG_USB_CXACRU is not set
@@ -1601,6 +1550,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=m
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1611,8 +1561,8 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -1620,7 +1570,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1705,6 +1654,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1732,6 +1682,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1750,6 +1702,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1758,11 +1711,22 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
@@ -1776,7 +1740,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_SECURITY_SELINUX=y
@@ -1835,6 +1798,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index ba2a463b930..ef0c6e80050 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:09 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:03 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -81,7 +86,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -89,6 +93,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -105,10 +110,16 @@ CONFIG_SLAB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -118,6 +129,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -136,33 +148,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 # CONFIG_MPC8272_ADS is not set
 # CONFIG_PQ2FADS is not set
 CONFIG_EP8248E=y
 # CONFIG_PQ2ADS is not set
 CONFIG_8260=y
 CONFIG_8272=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -197,6 +219,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -204,6 +227,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -211,13 +235,22 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -233,10 +266,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -410,11 +439,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -434,16 +465,23 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -457,14 +495,25 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
+#
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -482,21 +531,59 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FCC=y
 # CONFIG_FS_ENET_MDIO_FCC is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -505,6 +592,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NETPOLL is not set
@@ -541,6 +629,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -549,21 +638,44 @@ CONFIG_SERIAL_CPM_SCC1=y
 CONFIG_SERIAL_CPM_SCC4=y
 # CONFIG_SERIAL_CPM_SMC1 is not set
 # CONFIG_SERIAL_CPM_SMC2 is not set
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -575,8 +687,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -597,6 +711,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
@@ -606,16 +722,13 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
@@ -675,6 +788,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -684,8 +798,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -763,6 +877,7 @@ CONFIG_NLS_UTF8=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -804,19 +919,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -824,6 +951,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -864,6 +992,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -894,6 +1026,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index ac72b48542d..480225be2f3 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:09 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:04 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -108,10 +109,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -121,6 +128,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,8 +147,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -158,6 +164,7 @@ CONFIG_PPC_EP88XC=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -176,7 +183,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -193,7 +199,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -217,6 +223,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -224,6 +231,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -256,10 +264,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -442,7 +446,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -544,10 +547,13 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -559,8 +565,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -590,10 +598,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -662,6 +666,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -672,13 +677,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -717,6 +721,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -741,6 +746,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -756,16 +763,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -777,6 +796,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 48434c2c762..6fc4c212775 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:10 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:05 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,7 +94,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -158,25 +165,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 CONFIG_LINKSTATION=y
 # CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
@@ -207,7 +214,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -230,6 +237,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -237,6 +245,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -273,10 +282,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -461,6 +466,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 CONFIG_IEEE80211=m
 CONFIG_IEEE80211_DEBUG=y
@@ -480,7 +486,9 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -592,12 +600,14 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -676,6 +686,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -743,12 +754,15 @@ CONFIG_PATA_SIL680=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -785,14 +799,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -803,6 +815,7 @@ CONFIG_R8169=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -889,12 +902,14 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -934,43 +949,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -979,10 +1015,13 @@ CONFIG_SENSORS_EEPROM=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -1036,6 +1075,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1047,8 +1087,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1086,10 +1128,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
@@ -1121,6 +1159,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1172,6 +1211,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1180,7 +1220,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1190,7 +1229,6 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1237,7 +1275,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1291,6 +1328,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1392,6 +1430,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1402,11 +1441,11 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1414,7 +1453,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1482,6 +1520,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1510,6 +1549,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1527,17 +1568,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1556,6 +1609,7 @@ CONFIG_CRYPTO=y
 #
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=m
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1594,6 +1648,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1627,5 +1685,6 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 066c583c1f8..ab5199f26a2 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:11 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:06 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -88,7 +89,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -112,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,6 +132,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -145,25 +152,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
 CONFIG_MPC7448HPC2=y
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_TSI108_BRIDGE=y
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
@@ -192,7 +199,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +222,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +230,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -256,10 +265,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -374,12 +379,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -457,6 +464,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -523,12 +531,15 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -594,7 +605,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -611,6 +621,7 @@ CONFIG_TSI108_ETH=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -716,6 +727,8 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -736,6 +749,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -747,8 +761,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -780,10 +796,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -797,6 +809,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -875,6 +891,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -884,12 +901,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -929,6 +945,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -954,7 +971,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1007,6 +1033,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index 30d7834b7db..7c435c84c87 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:12 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:07 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -81,7 +86,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -89,6 +93,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -106,10 +111,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -119,6 +130,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -137,14 +149,16 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 CONFIG_MPC8272_ADS=y
 # CONFIG_PQ2FADS is not set
 # CONFIG_EP8248E is not set
@@ -152,19 +166,27 @@ CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_8272=y
 CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -181,7 +203,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -199,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -206,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -213,9 +237,11 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -242,10 +268,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -446,9 +468,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -460,6 +484,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -480,13 +505,12 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -510,8 +534,11 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -533,7 +560,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -545,6 +571,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -610,6 +637,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -620,6 +648,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -634,6 +663,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -654,6 +684,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -666,6 +697,8 @@ CONFIG_SERIAL_CPM_SCC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -676,10 +709,28 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -691,8 +742,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -724,10 +777,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -798,6 +847,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -807,8 +857,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -888,6 +938,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -914,6 +965,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -931,19 +984,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -951,6 +1016,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -991,6 +1057,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1021,6 +1091,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 4293c8be06e..916e3df7cc4 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:14 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:16:25 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -16,6 +16,7 @@ CONFIG_6xx=y
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -32,12 +33,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -51,6 +54,10 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -88,13 +95,13 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -112,10 +119,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -126,12 +139,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -150,40 +164,52 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-CONFIG_PPC_83xx=y
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
-CONFIG_MPC83xx=y
+CONFIG_PPC_83xx=y
 CONFIG_MPC831x_RDB=y
 CONFIG_MPC832x_MDS=y
 CONFIG_MPC832x_RDB=y
 CONFIG_MPC834x_MDS=y
 CONFIG_MPC834x_ITX=y
 CONFIG_MPC836x_MDS=y
+CONFIG_MPC836x_RDK=y
 CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_SBC834x=y
+CONFIG_ASP834x=y
 CONFIG_PPC_MPC831x=y
 CONFIG_PPC_MPC832x=y
 CONFIG_PPC_MPC834x=y
 CONFIG_PPC_MPC837x=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_IPIC=y
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_QUICC_ENGINE=y
 # CONFIG_FSL_ULI1575 is not set
 
@@ -211,6 +237,7 @@ CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -223,6 +250,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -230,6 +258,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -237,15 +266,24 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
 #
@@ -261,10 +299,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -412,11 +446,13 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
 CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -434,10 +470,12 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
 CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_NAND_FSL_UPM is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
@@ -445,14 +483,21 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -460,9 +505,14 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -505,24 +555,128 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
 CONFIG_SATA_FSL=y
 CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
 CONFIG_PHYLIB=y
 
 #
@@ -542,21 +696,60 @@ CONFIG_ICPLUS_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
 CONFIG_UCC_GETH=y
-# CONFIG_UGETH_NAPI is not set
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
 
 #
 # Wireless LAN
@@ -574,8 +767,11 @@ CONFIG_NETDEV_10000=y
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -619,12 +815,14 @@ CONFIG_INPUT=y
 # CONFIG_VT is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -635,43 +833,95 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -679,10 +929,31 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -692,8 +963,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
@@ -715,13 +988,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
@@ -732,6 +1008,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -739,7 +1016,15 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-CONFIG_83xx_WDT=y
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
 
 #
 # USB-based Watchdog Cards
@@ -755,8 +1040,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -778,6 +1065,8 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_FB is not set
@@ -787,10 +1076,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -806,7 +1091,7 @@ CONFIG_USB_HID=y
 # CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
@@ -821,6 +1106,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -833,6 +1119,8 @@ CONFIG_USB_EHCI_FSL=y
 CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
@@ -858,7 +1146,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -871,7 +1158,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -893,6 +1179,7 @@ CONFIG_USB_MON=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
@@ -963,6 +1250,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -973,14 +1261,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1014,6 +1301,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+CONFIG_QE_GPIO=y
 
 #
 # Library routines
@@ -1022,6 +1310,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1045,8 +1334,18 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1061,12 +1360,14 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 
 #
@@ -1100,6 +1401,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1131,6 +1436,8 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index fa0170504b8..f0a13bebf50 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 09:03:46 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 07:15:20 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_PPC_85xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 CONFIG_FSL_EMB_PERFMON=y
@@ -33,12 +34,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -92,7 +95,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +120,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,8 +165,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PQ2ADS is not set
@@ -166,11 +173,13 @@ CONFIG_MPC8540_ADS=y
 CONFIG_MPC8560_ADS=y
 CONFIG_MPC85xx_CDS=y
 CONFIG_MPC85xx_MDS=y
+CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_KSI8560=y
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
+CONFIG_TQM8548=y
 CONFIG_TQM8555=y
 CONFIG_TQM8560=y
 CONFIG_SBC8548=y
@@ -189,7 +198,6 @@ CONFIG_PPC_I8259=y
 # CONFIG_CPU_FREQ is not set
 CONFIG_QUICC_ENGINE=y
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
 
@@ -206,7 +214,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -229,6 +237,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -236,6 +245,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -248,6 +258,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -274,10 +285,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_PHYSICAL_ALIGN=0x10000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -403,12 +410,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -429,12 +439,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -514,6 +526,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -581,12 +594,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -631,7 +647,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -645,10 +660,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -725,12 +740,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -776,44 +793,68 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -821,10 +862,32 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -836,8 +899,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -879,6 +944,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -925,6 +991,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -992,15 +1059,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1014,19 +1073,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1088,39 +1143,12 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1152,6 +1180,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1175,6 +1204,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1203,6 +1233,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1211,7 +1242,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1224,7 +1254,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1285,6 +1314,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1318,6 +1348,7 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_UIO is not set
 
 #
@@ -1332,6 +1363,7 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -1394,6 +1426,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1406,17 +1439,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1487,6 +1519,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=m
 # CONFIG_DLM is not set
+# CONFIG_QE_GPIO is not set
 
 #
 # Library routines
@@ -1495,6 +1528,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1515,11 +1549,13 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1538,19 +1574,31 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
+CONFIG_VIRQ_DEBUG=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1606,6 +1654,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1638,6 +1690,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index cdf98ae3682..1a9990731eb 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Tue Jul 15 08:31:01 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:10 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -91,7 +92,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +144,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -159,9 +166,8 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
@@ -207,7 +213,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -230,6 +236,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -237,6 +244,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -278,10 +286,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -391,6 +395,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -503,18 +509,17 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -593,6 +598,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_MESH is not set
 # CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -669,7 +675,6 @@ CONFIG_PATA_ALI=y
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -756,12 +761,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -807,44 +814,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -853,6 +885,8 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -869,8 +903,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -945,6 +981,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_FSL_DIU=y
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
@@ -963,15 +1000,7 @@ CONFIG_VGA_CONSOLE=y
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -985,18 +1014,12 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1058,42 +1081,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 # CONFIG_SND_POWERMAC is not set
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 # CONFIG_SND_AOA is not set
-# CONFIG_SND_AOA_SOUNDBUS is not set
-
-#
-# System on Chip audio support
-#
 CONFIG_SND_SOC=y
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
 CONFIG_SND_SOC_MPC8610=y
 CONFIG_SND_SOC_MPC8610_HPCD=y
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
 CONFIG_SND_SOC_CS4270=y
 CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1107,6 +1102,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -1235,6 +1234,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1245,16 +1245,15 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1334,6 +1333,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1358,6 +1358,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1376,19 +1378,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1443,6 +1455,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1475,6 +1491,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 867b8c0215f..ea09be31b6e 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:15 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -92,7 +93,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -100,6 +100,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -118,10 +119,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,30 +165,40 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 CONFIG_MPC8641_HPCN=y
 # CONFIG_SBC8641D is not set
 # CONFIG_MPC8610_HPCD is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_FSL_ULI1575=y
 
 #
@@ -196,16 +214,18 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -219,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +247,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,11 +255,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -264,10 +288,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -393,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -403,6 +425,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -419,12 +442,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,7 +528,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -571,12 +599,15 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -603,6 +634,8 @@ CONFIG_VITESSE_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -620,7 +653,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -634,9 +666,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -713,12 +746,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -746,11 +781,14 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
@@ -762,43 +800,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -807,10 +872,13 @@ CONFIG_SENSORS_EEPROM=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -822,8 +890,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -865,6 +935,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_TTUSB_BUDGET is not set
 # CONFIG_DVB_TTUSB_DEC is not set
 # CONFIG_DVB_CINERGYT2 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -911,6 +982,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
 # CONFIG_DVB_SP887X is not set
 # CONFIG_DVB_CX22700 is not set
 # CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_DRX397XD is not set
 # CONFIG_DVB_L64781 is not set
 # CONFIG_DVB_TDA1004X is not set
 # CONFIG_DVB_NXT6000 is not set
@@ -978,15 +1050,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1000,19 +1064,15 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1074,39 +1134,14 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_PPC=y
+# CONFIG_SND_POWERMAC is not set
+# CONFIG_SND_AOA is not set
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y
 CONFIG_HID_SUPPORT=y
@@ -1138,6 +1173,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1189,6 +1225,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1197,7 +1234,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1210,7 +1246,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1264,6 +1299,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1362,6 +1398,7 @@ CONFIG_EFS_FS=m
 CONFIG_CRAMFS=y
 CONFIG_VXFS_FS=m
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 CONFIG_HPFS_FS=m
 CONFIG_QNX4FS_FS=m
 # CONFIG_ROMFS_FS is not set
@@ -1374,17 +1411,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1463,6 +1499,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1488,6 +1525,8 @@ CONFIG_FRAME_WARN=1024
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1506,19 +1545,32 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1573,6 +1625,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1605,5 +1661,6 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 46fffbcd3f9..1501c4336b3 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:16 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:11 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -106,10 +107,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -120,6 +127,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -138,8 +146,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -157,6 +163,7 @@ CONFIG_MPC86XADS=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 CONFIG_8xx_CPU6=y
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -175,7 +182,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -192,7 +198,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -215,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -222,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -253,10 +261,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +365,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -378,7 +383,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -414,7 +418,6 @@ CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
 CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_GIANFAR is not set
 CONFIG_NETDEV_10000=y
 
@@ -484,6 +487,7 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_SERPORT=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -524,6 +528,8 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -540,6 +546,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -551,8 +558,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -582,10 +591,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -598,6 +603,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -677,6 +686,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -687,13 +697,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -733,6 +742,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -758,7 +768,15 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -810,6 +828,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -841,6 +863,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_DEFLATE is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 9df78973005..fc3f6dc5812 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:17 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:12 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -29,6 +29,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -108,10 +109,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=1
@@ -121,6 +128,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -139,8 +147,6 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 CONFIG_CPM1=y
@@ -165,6 +171,7 @@ CONFIG_MPC8xx_SECOND_ETH_FEC2=y
 # Generic MPC8xx Options
 #
 CONFIG_8xx_COPYBACK=y
+# CONFIG_8xx_GPIO is not set
 # CONFIG_8xx_CPU6 is not set
 CONFIG_8xx_CPU15=y
 CONFIG_NO_UCODE_PATCH=y
@@ -183,7 +190,6 @@ CONFIG_NO_UCODE_PATCH=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -200,7 +206,7 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -224,6 +230,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -231,6 +238,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -263,10 +271,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
 CONFIG_CONSISTENT_START=0xfd000000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -453,7 +457,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -555,10 +558,13 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -570,8 +576,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -601,10 +609,6 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -673,6 +677,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -683,13 +688,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -728,6 +732,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
@@ -752,6 +757,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -767,16 +774,28 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -788,6 +807,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index bc3bf62ddc2..b390b747664 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:13 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -15,6 +15,7 @@ CONFIG_6xx=y
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
@@ -31,12 +32,14 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -45,11 +48,13 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
-# CONFIG_PPC_UDBG_16550 is not set
+CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -82,7 +87,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -90,6 +94,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -107,10 +112,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -120,6 +131,7 @@ CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -138,33 +150,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-CONFIG_PPC_82xx=y
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
 # CONFIG_MPC8272_ADS is not set
 CONFIG_PQ2FADS=y
 # CONFIG_EP8248E is not set
 CONFIG_PQ2ADS=y
 CONFIG_8260=y
 CONFIG_PQ2_ADS_PCI_PIC=y
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
-# CONFIG_MPIC is not set
+CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 # CONFIG_FSL_ULI1575 is not set
 CONFIG_CPM=y
 
@@ -181,7 +203,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -199,6 +221,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -206,6 +229,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -213,9 +237,11 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -243,10 +269,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -447,9 +469,11 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -461,14 +485,15 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -486,7 +511,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 
 #
@@ -498,9 +522,7 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -517,9 +539,8 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDE_PMAC is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -537,13 +558,12 @@ CONFIG_IDE_PROC_FS=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -567,8 +587,11 @@ CONFIG_DAVICOM_PHY=y
 # CONFIG_REALTEK_PHY is not set
 # CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -590,7 +613,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
@@ -602,6 +624,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
@@ -667,6 +690,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -677,7 +701,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -692,6 +718,7 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -712,6 +739,7 @@ CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 CONFIG_SERIAL_CPM=y
 CONFIG_SERIAL_CPM_CONSOLE=y
 CONFIG_SERIAL_CPM_SCC1=y
@@ -724,6 +752,8 @@ CONFIG_SERIAL_CPM_SCC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
@@ -734,10 +764,28 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -749,8 +797,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -782,10 +832,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_SUPPORT=y
@@ -795,6 +841,8 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -807,7 +855,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_PXA27X is not set
@@ -826,6 +874,7 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -893,6 +942,7 @@ CONFIG_TMPFS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -902,8 +952,8 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
@@ -983,6 +1033,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1009,6 +1060,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1026,19 +1079,31 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
-# CONFIG_KGDB_CONSOLE is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 CONFIG_BDI_SWITCH=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1046,6 +1111,7 @@ CONFIG_BDI_SWITCH=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1086,6 +1152,10 @@ CONFIG_CRYPTO_PCBC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1117,6 +1187,7 @@ CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_PPC_CLOCK is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_PPC_CLOCK=y
 CONFIG_PPC_LIB_RHEAP=y
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index c6b83577c05..01b54eac1ff 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:14 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -34,6 +34,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -94,7 +95,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -118,10 +118,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -132,6 +138,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -151,25 +158,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 # CONFIG_STORCENTER is not set
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 CONFIG_PPC_PRPMC2800=y
+# CONFIG_PPC_C2K is not set
 CONFIG_MV64X60=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
@@ -198,7 +205,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -221,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -228,6 +236,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -264,10 +273,6 @@ CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -359,7 +364,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -461,12 +468,14 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -487,7 +496,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -505,10 +513,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -526,8 +532,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -603,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -669,6 +674,10 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -676,7 +685,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -741,10 +749,8 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -760,6 +766,7 @@ CONFIG_E1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -840,6 +847,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -875,43 +883,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -920,10 +949,13 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -977,6 +1009,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -988,8 +1021,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1028,10 +1063,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1060,6 +1091,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1102,7 +1134,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1115,7 +1146,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1169,6 +1199,7 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1258,6 +1289,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1267,12 +1299,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1312,6 +1343,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1337,7 +1369,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1390,6 +1431,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig
index 8227510b41a..f545421f985 100644
--- a/arch/powerpc/configs/sbc8641d_defconfig
+++ b/arch/powerpc/configs/sbc8641d_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:19 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:15 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
@@ -92,7 +93,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -100,6 +100,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -117,10 +118,16 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +145,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -156,30 +164,40 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 CONFIG_SBC8641D=y
 # CONFIG_MPC8610_HPCD is not set
 CONFIG_MPC8641=y
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -195,7 +213,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -203,9 +221,11 @@ CONFIG_PREEMPT=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_HOTPLUG_CPU is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
@@ -219,6 +239,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -226,6 +247,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -233,11 +255,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -265,10 +289,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -282,6 +302,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -406,6 +427,7 @@ CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 # CONFIG_IP_NF_TARGET_TTL is not set
 CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_SECURITY is not set
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -429,6 +451,7 @@ CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_MANGLE=m
 # CONFIG_IP6_NF_TARGET_HL is not set
 CONFIG_IP6_NF_RAW=m
+# CONFIG_IP6_NF_SECURITY is not set
 
 #
 # Bridge: Netfilter Configuration
@@ -451,8 +474,10 @@ CONFIG_ATM_LANE=m
 CONFIG_ATM_MPOA=m
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
 # CONFIG_LLC2 is not set
@@ -472,7 +497,6 @@ CONFIG_NET_SCH_HTB=m
 CONFIG_NET_SCH_HFSC=m
 CONFIG_NET_SCH_ATM=m
 CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -625,6 +649,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -640,12 +665,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -680,12 +707,15 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -712,6 +742,8 @@ CONFIG_BROADCOM_PHY=y
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -729,7 +761,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -743,9 +774,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
-# CONFIG_GFAR_NAPI is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -768,7 +800,7 @@ CONFIG_ATM_DRIVERS=y
 # CONFIG_ATM_AMBASSADOR is not set
 # CONFIG_ATM_HORIZON is not set
 # CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
+# CONFIG_ATM_FORE200E is not set
 # CONFIG_ATM_HE is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -834,6 +866,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -857,11 +890,14 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
@@ -874,42 +910,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -918,10 +981,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -931,6 +997,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_AMS is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
@@ -975,6 +1042,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -982,6 +1050,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_8xxx_WDT is not set
+# CONFIG_WATCHDOG_RTAS is not set
 
 #
 # PCI-based Watchdog Cards
@@ -998,8 +1069,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1038,10 +1111,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1055,6 +1124,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
@@ -1096,6 +1169,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1145,6 +1219,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=m
@@ -1155,14 +1230,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1183,6 +1257,7 @@ CONFIG_CIFS_POSIX=y
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MAC_PARTITION=y
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
@@ -1233,6 +1308,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1259,6 +1335,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1275,21 +1353,34 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1299,7 +1390,6 @@ CONFIG_DEBUGGER=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_CRYPTO=y
@@ -1349,6 +1439,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1382,5 +1476,6 @@ CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
 # CONFIG_PPC_CLOCK is not set
 # CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 88f6aa8273b..4340cc1c5b6 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:52:20 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 00:52:16 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -87,7 +88,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -110,10 +110,16 @@ CONFIG_SLUB=y
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -130,6 +136,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -149,25 +156,25 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_LINKSTATION is not set
 CONFIG_STORCENTER=y
 # CONFIG_MPC7448HPC2 is not set
 # CONFIG_PPC_HOLLY is not set
 # CONFIG_PPC_PRPMC2800 is not set
+# CONFIG_PPC_C2K is not set
 CONFIG_MPC10X_BRIDGE=y
 CONFIG_MPC10X_OPENPIC=y
 # CONFIG_MPC10X_STORE_GATHERING is not set
@@ -221,6 +228,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -229,6 +237,7 @@ CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyS0,115200"
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
@@ -264,10 +273,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -456,20 +461,22 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
@@ -483,7 +490,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -500,10 +506,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -521,8 +525,6 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -599,6 +601,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -616,12 +619,15 @@ CONFIG_MD_RAID5_RESHAPE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -635,14 +641,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
@@ -653,6 +657,7 @@ CONFIG_R8169=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -734,43 +739,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -779,10 +805,13 @@ CONFIG_I2C_MPC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -794,8 +823,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -827,10 +858,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -849,6 +876,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -896,6 +924,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -904,7 +933,6 @@ CONFIG_USB_STORAGE=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -917,7 +945,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -971,6 +998,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1074,6 +1102,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1151,6 +1180,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1178,7 +1208,16 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
-- 
GitLab


From 04da11bfcf511544ae19e0a7e5f994b3237752ac Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 20 Aug 2008 17:16:34 +0300
Subject: [PATCH 258/869] UBIFS: fix zero-length truncations

Always allow truncations to zero, even if budgeting thinks there
is no space. UBIFS reserves some space for deletions anyway.

Otherwise, the following happans:
1. create a file, and write as much as possible there, until ENOSPC
2. truncate the file, which fails with ENOSPC, which is not good.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/dir.c  |  1 -
 fs/ubifs/file.c | 20 ++++++++++++++++----
 2 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c
index 5c96f1fb701..2b267c9a180 100644
--- a/fs/ubifs/dir.c
+++ b/fs/ubifs/dir.c
@@ -587,7 +587,6 @@ static int ubifs_unlink(struct inode *dir, struct dentry *dentry)
 	if (err) {
 		if (err != -ENOSPC)
 			return err;
-		err = 0;
 		budgeted = 0;
 	}
 
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 4071d1cae29..3d698e2022b 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -793,7 +793,7 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode,
 	int err;
 	struct ubifs_budget_req req;
 	loff_t old_size = inode->i_size, new_size = attr->ia_size;
-	int offset = new_size & (UBIFS_BLOCK_SIZE - 1);
+	int offset = new_size & (UBIFS_BLOCK_SIZE - 1), budgeted = 1;
 	struct ubifs_inode *ui = ubifs_inode(inode);
 
 	dbg_gen("ino %lu, size %lld -> %lld", inode->i_ino, old_size, new_size);
@@ -811,8 +811,15 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode,
 	/* A funny way to budget for truncation node */
 	req.dirtied_ino_d = UBIFS_TRUN_NODE_SZ;
 	err = ubifs_budget_space(c, &req);
-	if (err)
-		return err;
+	if (err) {
+		/*
+		 * Treat truncations to zero as deletion and always allow them,
+		 * just like we do for '->unlink()'.
+		 */
+		if (new_size || err != -ENOSPC)
+			return err;
+		budgeted = 0;
+	}
 
 	err = vmtruncate(inode, new_size);
 	if (err)
@@ -869,7 +876,12 @@ static int do_truncation(struct ubifs_info *c, struct inode *inode,
 	err = ubifs_jnl_truncate(c, inode, old_size, new_size);
 	mutex_unlock(&ui->ui_mutex);
 out_budg:
-	ubifs_release_budget(c, &req);
+	if (budgeted)
+		ubifs_release_budget(c, &req);
+	else {
+		c->nospace = c->nospace_rp = 0;
+		smp_wmb();
+	}
 	return err;
 }
 
-- 
GitLab


From 25fdeb3f4468595ab2885687b13515fa848731c2 Mon Sep 17 00:00:00 2001
From: Ingo Oeser <ioe-lkml@rameria.de>
Date: Wed, 23 Jul 2008 01:25:01 +0200
Subject: [PATCH 259/869] kobject: Replace ALL occurrences of '/' with '!'
 instead of only the first one.

A recent patch from Kay Sievers <kay.sievers@vrfy.org>
replaced the first occurrence of '/' with '!' as needed for block devices.

Now do some cheap defensive coding and replace all of them to avoid future
issues in this area.

Signed-off-by: Ingo Oeser <ioe-lkml@rameria.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 lib/kobject.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/lib/kobject.c b/lib/kobject.c
index bd732ffebc8..fbf0ae28237 100644
--- a/lib/kobject.c
+++ b/lib/kobject.c
@@ -223,8 +223,7 @@ static int kobject_set_name_vargs(struct kobject *kobj, const char *fmt,
 		return -ENOMEM;
 
 	/* ewww... some of these buggers have '/' in the name ... */
-	s = strchr(kobj->name, '/');
-	if (s)
+	while ((s = strchr(kobj->name, '/')))
 		s[0] = '!';
 
 	kfree(old_name);
-- 
GitLab


From 95e0a8778ebf53b745763032485d2c96f47ed39b Mon Sep 17 00:00:00 2001
From: Takenori Nagano <t-nagano@ah.jp.nec.com>
Date: Tue, 15 Jul 2008 17:49:42 +0900
Subject: [PATCH 260/869] Japanese translation of Documentation/SubmitChecklist

Hi,

This patch adds SubmitChecklist translated into Japanese to
Documentation/ja_JP directory.
The translated SubmitChecklist has already been reviewed by JF project.

SubmitChecklist is one of the important policy documents.
So, I would like to merge into 2.6.27.

Signed-off-by: Takenori Nagano <t-nagano@ah.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/ja_JP/SubmitChecklist | 111 ++++++++++++++++++++++++++++
 1 file changed, 111 insertions(+)
 create mode 100644 Documentation/ja_JP/SubmitChecklist

diff --git a/Documentation/ja_JP/SubmitChecklist b/Documentation/ja_JP/SubmitChecklist
new file mode 100644
index 00000000000..6c42e071d72
--- /dev/null
+++ b/Documentation/ja_JP/SubmitChecklist
@@ -0,0 +1,111 @@
+NOTE:
+This is a version of Documentation/SubmitChecklist into Japanese.
+This document is maintained by Takenori Nagano <t-nagano@ah.jp.nec.com>
+and the JF Project team <http://www.linux.or.jp/JF/>.
+If you find any difference between this document and the original file
+or a problem with the translation,
+please contact the maintainer of this file or JF project.
+
+Please also note that the purpose of this file is to be easier to read
+for non English (read: Japanese) speakers and is not intended as a
+fork. So if you have any comments or updates of this file, please try
+to update the original English file first.
+
+Last Updated: 2008/07/14
+==================================
+これは、
+linux-2.6.26/Documentation/SubmitChecklist の和訳です。
+
+翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
+翻訳日： 2008/07/14
+翻訳者： Takenori Nagano <t-nagano at ah dot jp dot nec dot com>
+校正者： Masanori Kobayashi さん <zap03216 at nifty dot ne dot jp>
+==================================
+
+
+Linux カーネルパッチ投稿者向けチェックリスト
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+本書では、パッチをより素早く取り込んでもらいたい開発者が実践すべき基本的な事柄
+をいくつか紹介します。ここにある全ての事柄は、Documentation/SubmittingPatches
+などのLinuxカーネルパッチ投稿に際しての心得を補足するものです。
+
+ 1: 妥当なCONFIGオプションや変更されたCONFIGオプション、つまり =y, =m, =n
+    全てで正しくビルドできることを確認してください。その際、gcc及びリンカが
+    warningやerrorを出していないことも確認してください。
+
+ 2: allnoconfig, allmodconfig オプションを用いて正しくビルドできることを
+    確認してください。
+
+ 3: 手許のクロスコンパイルツールやOSDLのPLMのようなものを用いて、複数の
+    アーキテクチャにおいても正しくビルドできることを確認してください。
+
+ 4: 64bit長の'unsigned long'を使用しているppc64は、クロスコンパイルでの
+    チェックに適当なアーキテクチャです。
+
+ 5: カーネルコーディングスタイルに準拠しているかどうか確認してください(!)
+
+ 6: CONFIGオプションの追加・変更をした場合には、CONFIGメニューが壊れていない
+    ことを確認してください。
+
+ 7: 新しくKconfigのオプションを追加する際には、必ずそのhelpも記述してください。
+
+ 8: 適切なKconfigの依存関係を考えながら慎重にチェックしてください。
+    ただし、この作業はマシンを使ったテストできちんと行うのがとても困難です。
+    うまくやるには、自分の頭で考えることです。
+
+ 9: sparseを利用してちゃんとしたコードチェックをしてください。
+
+10: 'make checkstack' と 'make namespacecheck' を利用し、問題が発見されたら
+    修正してください。'make checkstack' は明示的に問題を示しませんが、どれか
+    １つの関数が512バイトより大きいスタックを使っていれば、修正すべき候補と
+    なります。
+
+11: グローバルなkernel API を説明する kernel-doc をソースの中に含めてください。
+    ( staticな関数においては必須ではありませんが、含めてもらっても結構です )
+    そして、'make htmldocs' もしくは 'make mandocs' を利用して追記した
+    ドキュメントのチェックを行い、問題が見つかった場合には修正を行ってください。
+
+12: CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT, CONFIG_DEBUG_SLAB,
+    CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES, CONFIG_DEBUG_SPINLOCK,
+    CONFIG_DEBUG_SPINLOCK_SLEEP これら全てを同時に有効にして動作確認を
+    行ってください。
+
+13: CONFIG_SMP, CONFIG_PREEMPT を有効にした場合と無効にした場合の両方で
+    ビルドした上、動作確認を行ってください。
+
+14: もしパッチがディスクのI/O性能などに影響を与えるようであれば、
+    'CONFIG_LBD'オプションを有効にした場合と無効にした場合の両方で
+    テストを実施してみてください。
+
+15: lockdepの機能を全て有効にした上で、全てのコードパスを評価してください。
+
+16: /proc に新しいエントリを追加した場合には、Documentation/ 配下に
+    必ずドキュメントを追加してください。
+
+17: 新しいブートパラメータを追加した場合には、
+    必ずDocumentation/kernel-parameters.txt に説明を追加してください。
+
+18: 新しくmoduleにパラメータを追加した場合には、MODULE_PARM_DESC()を
+    利用して必ずその説明を記述してください。
+
+19: 新しいuserspaceインタフェースを作成した場合には、Documentation/ABI/ に
+    Documentation/ABI/README を参考にして必ずドキュメントを追加してください。
+
+20: 'make headers_check'を実行して全く問題がないことを確認してください。
+
+21: 少なくともslabアロケーションとpageアロケーションに失敗した場合の
+    挙動について、fault-injectionを利用して確認してください。
+    Documentation/fault-injection/ を参照してください。
+
+    追加したコードがかなりの量であったならば、サブシステム特有の
+    fault-injectionを追加したほうが良いかもしれません。
+
+22: 新たに追加したコードは、`gcc -W'でコンパイルしてください。
+    このオプションは大量の不要なメッセージを出力しますが、
+    "warning: comparison between signed and unsigned" のようなメッセージは、
+    バグを見つけるのに役に立ちます。
+
+23: 投稿したパッチが -mm パッチセットにマージされた後、全ての既存のパッチや
+    VM, VFS およびその他のサブシステムに関する様々な変更と、現時点でも共存
+    できることを確認するテストを行ってください。
-- 
GitLab


From ac60fc218caacba5ae3bc70cc835cb9f16794d89 Mon Sep 17 00:00:00 2001
From: Tsugikazu Shibata <tshibata@ab.jp.nec.com>
Date: Thu, 21 Aug 2008 11:42:39 +0900
Subject: [PATCH 261/869] Documentation: HOWTO-ja_JP-sync patch

Here is a patch for Documentation/ja_JP/HOWTO sync with latest
Documentation/HOWTO.
It includes translation of changes done by Jon Corbet,Jiri Pirko and me:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=history;f=Documentation/HOWTO;h=c2371c5a98f99b5eaa785bd0affd6c40187e84e3;hb=HEAD

Singed-off-by: Tsugikazu Shibata <tshibata@ab.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 Documentation/ja_JP/HOWTO | 67 +++++++++++++++++++++++++++------------
 1 file changed, 47 insertions(+), 20 deletions(-)

diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO
index 488c77fa3aa..0775cf4798b 100644
--- a/Documentation/ja_JP/HOWTO
+++ b/Documentation/ja_JP/HOWTO
@@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
 fork. So if you have any comments or updates for this file, please try
 to update the original English file first.
 
-Last Updated: 2007/11/16
+Last Updated: 2008/08/21
 ==================================
 これは、
-linux-2.6.24/Documentation/HOWTO
+linux-2.6.27/Documentation/HOWTO
 の和訳です。
 
 翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2007/11/10
+翻訳日： 2008/8/5
 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
 校正者： 松倉さん <nbh--mats at nifty dot com>
          小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -287,13 +287,15 @@ Linux カーネルの開発プロセスは現在幾つかの異なるメイン
     に安定した状態にあると判断したときにリリースされます。目標は毎週新
     しい -rc カーネルをリリースすることです。
 
-   - 以下の URL で各 -rc リリースに存在する既知の後戻り問題のリスト
-     が追跡されます-
-     http://kernelnewbies.org/known_regressions
-
   - このプロセスはカーネルが 「準備ができた」と考えられるまで継続しま
     す。このプロセスはだいたい 6週間継続します。
 
+  - 各リリースでの既知の後戻り問題(regression: このリリースの中で新規
+    に作り込まれた問題を指す) はその都度 Linux-kernel メーリングリスト
+    に投稿されます。ゴールとしては、カーネルが 「準備ができた」と宣言
+    する前にこのリストの長さをゼロに減らすことですが、現実には、数個の
+    後戻り問題がリリース時にたびたび残ってしまいます。
+
 Andrew Morton が Linux-kernel メーリングリストにカーネルリリースについ
 て書いたことをここで言っておくことは価値があります-
   「カーネルがいつリリースされるかは誰も知りません。なぜなら、これは現
@@ -303,18 +305,20 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
 2.6.x.y -stable カーネルツリー
 ---------------------------
 
-バージョンに4つ目の数字がついたカーネルは -stable カーネルです。これに
-は、2.6.x カーネルで見つかったセキュリティ問題や重大な後戻りに対する比
-較的小さい重要な修正が含まれます。
+バージョン番号が4つの数字に分かれているカーネルは -stable カーネルです。
+これには、2.6.x カーネルで見つかったセキュリティ問題や重大な後戻りに対
+する比較的小さい重要な修正が含まれます。
 
 これは、開発/実験的バージョンのテストに協力することに興味が無く、
 最新の安定したカーネルを使いたいユーザに推奨するブランチです。
 
-もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x
-が最新の安定版カーネルです。
+もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x が
+最新の安定版カーネルです。
 
-2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、だ
-いたい隔週でリリースされています。
+2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
+要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ
+た問題がなければもう少し長くなることもあります。セキュリティ関連の問題
+の場合はこれに対してだいたいの場合、すぐにリリースがされます。
 
 カーネルツリーに入っている、Documentation/stable_kernel_rules.txt ファ
 イルにはどのような種類の変更が -stable ツリーに受け入れ可能か、またリ
@@ -341,7 +345,9 @@ linux-kernel メーリングリストで収集された多数のパッチと同
 メインラインへ入れるように Linus にプッシュします。
 
 メインカーネルツリーに含めるために Linus に送る前に、すべての新しいパッ
-チが -mm ツリーでテストされることが強く推奨されます。
+チが -mm ツリーでテストされることが強く推奨されています。マージウィン
+ドウが開く前に -mm ツリーに現れなかったパッチはメインラインにマージさ
+れることは困難になります。
 
 これらのカーネルは安定して動作すべきシステムとして使うのには適切ではあ
 りませんし、カーネルブランチの中でももっとも動作にリスクが高いものです。
@@ -395,13 +401,15 @@ linux-kernel メーリングリストで収集された多数のパッチと同
     - pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
 	git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
 
-    - SCSI, James Bottomley <James.Bottomley@SteelEye.com>
+    - SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
 	git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 
+    - x86, Ingo Molnar <mingo@elte.hu>
+	git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+
   quilt ツリー-
-    - USB, PCI ドライバコアと I2C, Greg Kroah-Hartman <gregkh@suse.de>
+    - USB, ドライバコアと I2C, Greg Kroah-Hartman <gregkh@suse.de>
 	kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
-    - x86-64 と i386 の仲間 Andi Kleen <ak@suse.de>
 
   その他のカーネルツリーは http://git.kernel.org/ と MAINTAINERS ファ
   イルに一覧表があります。
@@ -412,13 +420,32 @@ linux-kernel メーリングリストで収集された多数のパッチと同
 bugzilla.kernel.org は Linux カーネル開発者がカーネルのバグを追跡する
 場所です。ユーザは見つけたバグの全てをこのツールで報告すべきです。
 どう kernel bugzilla を使うかの詳細は、以下を参照してください-
-	http://test.kernel.org/bugzilla/faq.html
-
+	http://bugzilla.kernel.org/page.cgi?id=faq.html
 メインカーネルソースディレクトリにあるファイル REPORTING-BUGS はカーネ
 ルバグらしいものについてどうレポートするかの良いテンプレートであり、問
 題の追跡を助けるためにカーネル開発者にとってどんな情報が必要なのかの詳
 細が書かれています。
 
+バグレポートの管理
+-------------------
+
+あなたのハッキングのスキルを訓練する最高の方法のひとつに、他人がレポー
+トしたバグを修正することがあります。あなたがカーネルをより安定化させる
+こに寄与するということだけでなく、あなたは 現実の問題を修正することを
+学び、自分のスキルも強化でき、また他の開発者があなたの存在に気がつき
+ます。バグを修正することは、多くの開発者の中から自分が功績をあげる最善
+の道です、なぜなら多くの人は他人のバグの修正に時間を浪費することを好ま
+ないからです。
+
+すでにレポートされたバグのために仕事をするためには、
+http://bugzilla.kernel.org に行ってください。もし今後のバグレポートに
+ついてアドバイスを受けたいのであれば、bugme-new メーリングリスト(新し
+いバグレポートだけがここにメールされる) または bugme-janitor メーリン
+グリスト(bugzilla の変更毎にここにメールされる)を購読できます。
+
+	http://lists.linux-foundation.org/mailman/listinfo/bugme-new
+	http://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
+
 メーリングリスト
 -------------
 
-- 
GitLab


From 26d02d1db7d84729b1e49789341e69a493c60ceb Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 30 Jul 2008 12:29:20 -0700
Subject: [PATCH 262/869] drivers/base/driver.c: remove unused to_dev() macro

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/driver.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index 2ef5acf4368..1e2bda780e4 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -16,9 +16,6 @@
 #include <linux/string.h>
 #include "base.h"
 
-#define to_dev(node) container_of(node, struct device, driver_list)
-
-
 static struct device *next_device(struct klist_iter *i)
 {
 	struct klist_node *n = klist_next(i);
-- 
GitLab


From bf9ca69fc8d19d4034391d3df4c35dccdef9d28c Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 30 Jul 2008 12:29:21 -0700
Subject: [PATCH 263/869] dev_printk(): constify the `dev' argument

Add const markings to dev_name and dev_driver_string to make it clear that
dev_printk doesn't modify dev.  This is a prerequisite to adding more
const markings to other functions make it clearer, which functions can
modify dev and which can't.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/core.c    | 2 +-
 include/linux/device.h | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index 068aa1c9538..44bad73d819 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -53,7 +53,7 @@ static inline int device_is_not_partition(struct device *dev)
  * it is attached to.  If it is not attached to a bus either, an empty
  * string will be returned.
  */
-const char *dev_driver_string(struct device *dev)
+const char *dev_driver_string(const struct device *dev)
 {
 	return dev->driver ? dev->driver->name :
 			(dev->bus ? dev->bus->name :
diff --git a/include/linux/device.h b/include/linux/device.h
index d24a47f80f9..a701c1b5184 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -406,7 +406,7 @@ struct device {
 /* Get the wakeup routines, which depend on struct device */
 #include <linux/pm_wakeup.h>
 
-static inline const char *dev_name(struct device *dev)
+static inline const char *dev_name(const struct device *dev)
 {
 	/* will be changed into kobject_name(&dev->kobj) in the near future */
 	return dev->bus_id;
@@ -518,7 +518,7 @@ extern void device_shutdown(void);
 extern void sysdev_shutdown(void);
 
 /* debugging and troubleshooting/diagnostic helpers. */
-extern const char *dev_driver_string(struct device *dev);
+extern const char *dev_driver_string(const struct device *dev);
 #define dev_printk(level, dev, format, arg...)	\
 	printk(level "%s %s: " format , dev_driver_string(dev) , \
 	       dev_name(dev) , ## arg)
-- 
GitLab


From 7c2250352e11bf956c4cfa20b01ae6ba72882788 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Wed, 6 Aug 2008 18:52:44 -0700
Subject: [PATCH 264/869] driver model: anti-oopsing medicine

Anti-oops medicine for the class iterators ... the oops was
observed when a class was implicitly referenced before it
was initialized.

[Modified by Greg to spit a warning back so someone knows to fix their code]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/class.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/base/class.c b/drivers/base/class.c
index 5667c2f02c5..cc5e28c8885 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -295,6 +295,12 @@ int class_for_each_device(struct class *class, struct device *start,
 
 	if (!class)
 		return -EINVAL;
+	if (!class->p) {
+		WARN(1, "%s called for class '%s' before it was initialized",
+		     __func__, class->name);
+		return -EINVAL;
+	}
+
 	mutex_lock(&class->p->class_mutex);
 	list_for_each_entry(dev, &class->p->class_devices, node) {
 		if (start) {
@@ -344,6 +350,11 @@ struct device *class_find_device(struct class *class, struct device *start,
 
 	if (!class)
 		return NULL;
+	if (!class->p) {
+		WARN(1, "%s called for class '%s' before it was initialized",
+		     __func__, class->name);
+		return NULL;
+	}
 
 	mutex_lock(&class->p->class_mutex);
 	list_for_each_entry(dev, &class->p->class_devices, node) {
-- 
GitLab


From 3b98aeaf3a75f544dc945694f4fcf6e1c4bab89d Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Thu, 7 Aug 2008 13:06:12 -0400
Subject: [PATCH 265/869] PM: don't skip device PM init when CONFIG_PM_SLEEP
 isn't set and CONFIG_PM is set

This patch (as1124) fixes a couple of bugs in the PM core.  The new
dev->power.status field should be initialized regardless of whether
CONFIG_PM_SLEEP is enabled, and similarly dpm_sysfs_add() should be
called whenever CONFIG_PM is enabled.

The patch separates out the call to dpm_sysfs_add() from the call to
device_pm_add().  As a result device_pm_add() can no longer return an
error, so its return type is changed to void.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Romit Dasgupta <romit@ti.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/core.c        |  9 ++++++---
 drivers/base/power/main.c  | 13 +++----------
 drivers/base/power/power.h |  9 +++++++--
 3 files changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index 44bad73d819..40041319657 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -541,6 +541,7 @@ void device_initialize(struct device *dev)
 	spin_lock_init(&dev->devres_lock);
 	INIT_LIST_HEAD(&dev->devres_head);
 	device_init_wakeup(dev, 0);
+	device_pm_init(dev);
 	set_dev_node(dev, -1);
 }
 
@@ -897,9 +898,10 @@ int device_add(struct device *dev)
 	error = bus_add_device(dev);
 	if (error)
 		goto BusError;
-	error = device_pm_add(dev);
+	error = dpm_sysfs_add(dev);
 	if (error)
-		goto PMError;
+		goto DPMError;
+	device_pm_add(dev);
 	kobject_uevent(&dev->kobj, KOBJ_ADD);
 	bus_attach_device(dev);
 	if (parent)
@@ -920,7 +922,7 @@ int device_add(struct device *dev)
  Done:
 	put_device(dev);
 	return error;
- PMError:
+ DPMError:
 	bus_remove_device(dev);
  BusError:
 	if (dev->bus)
@@ -1007,6 +1009,7 @@ void device_del(struct device *dev)
 	struct class_interface *class_intf;
 
 	device_pm_remove(dev);
+	dpm_sysfs_remove(dev);
 	if (parent)
 		klist_del(&dev->knode_parent);
 	if (MAJOR(dev->devt)) {
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 3250c5257b7..284f564bb12 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -67,10 +67,8 @@ void device_pm_unlock(void)
  *	device_pm_add - add a device to the list of active devices
  *	@dev:	Device to be added to the list
  */
-int device_pm_add(struct device *dev)
+void device_pm_add(struct device *dev)
 {
-	int error;
-
 	pr_debug("PM: Adding info for %s:%s\n",
 		 dev->bus ? dev->bus->name : "No Bus",
 		 kobject_name(&dev->kobj));
@@ -89,13 +87,9 @@ int device_pm_add(struct device *dev)
 		 */
 		WARN_ON(true);
 	}
-	error = dpm_sysfs_add(dev);
-	if (!error) {
-		dev->power.status = DPM_ON;
-		list_add_tail(&dev->power.entry, &dpm_list);
-	}
+
+	list_add_tail(&dev->power.entry, &dpm_list);
 	mutex_unlock(&dpm_list_mtx);
-	return error;
 }
 
 /**
@@ -110,7 +104,6 @@ void device_pm_remove(struct device *dev)
 		 dev->bus ? dev->bus->name : "No Bus",
 		 kobject_name(&dev->kobj));
 	mutex_lock(&dpm_list_mtx);
-	dpm_sysfs_remove(dev);
 	list_del_init(&dev->power.entry);
 	mutex_unlock(&dpm_list_mtx);
 }
diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h
index a3252c0e288..41f51fae042 100644
--- a/drivers/base/power/power.h
+++ b/drivers/base/power/power.h
@@ -1,3 +1,8 @@
+static inline void device_pm_init(struct device *dev)
+{
+	dev->power.status = DPM_ON;
+}
+
 #ifdef CONFIG_PM_SLEEP
 
 /*
@@ -11,12 +16,12 @@ static inline struct device *to_device(struct list_head *entry)
 	return container_of(entry, struct device, power.entry);
 }
 
-extern int device_pm_add(struct device *);
+extern void device_pm_add(struct device *);
 extern void device_pm_remove(struct device *);
 
 #else /* CONFIG_PM_SLEEP */
 
-static inline int device_pm_add(struct device *dev) { return 0; }
+static inline void device_pm_add(struct device *dev) {}
 static inline void device_pm_remove(struct device *dev) {}
 
 #endif
-- 
GitLab


From c906a48adc74fc455378137ac5124b13e7030a15 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Fri, 30 May 2008 10:45:12 -0700
Subject: [PATCH 266/869] driver core: add init_name to struct device

This gives us a way to handle both the bus_id and init_name values being
used for a while during the transition period.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/core.c    | 20 +++++++++++++-------
 include/linux/device.h |  1 +
 2 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/base/core.c b/drivers/base/core.c
index 40041319657..d021c98605b 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -844,13 +844,19 @@ int device_add(struct device *dev)
 {
 	struct device *parent = NULL;
 	struct class_interface *class_intf;
-	int error;
+	int error = -EINVAL;
 
 	dev = get_device(dev);
-	if (!dev || !strlen(dev->bus_id)) {
-		error = -EINVAL;
-		goto Done;
-	}
+	if (!dev)
+		goto done;
+
+	/* Temporarily support init_name if it is set.
+	 * It will override bus_id for now */
+	if (dev->init_name)
+		dev_set_name(dev, "%s", dev->init_name);
+
+	if (!strlen(dev->bus_id))
+		goto done;
 
 	pr_debug("device: '%s': %s\n", dev->bus_id, __func__);
 
@@ -919,7 +925,7 @@ int device_add(struct device *dev)
 				class_intf->add_dev(dev, class_intf);
 		mutex_unlock(&dev->class->p->class_mutex);
 	}
- Done:
+done:
 	put_device(dev);
 	return error;
  DPMError:
@@ -946,7 +952,7 @@ int device_add(struct device *dev)
 	cleanup_device_parent(dev);
 	if (parent)
 		put_device(parent);
-	goto Done;
+	goto done;
 }
 
 /**
diff --git a/include/linux/device.h b/include/linux/device.h
index a701c1b5184..4d8372d135d 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -358,6 +358,7 @@ struct device {
 
 	struct kobject kobj;
 	char	bus_id[BUS_ID_SIZE];	/* position on parent bus */
+	const char		*init_name; /* initial name of the device */
 	struct device_type	*type;
 	unsigned		uevent_suppress:1;
 
-- 
GitLab


From f5a6d958b5d0a10e7e7a9dee1862fb31d08c6d26 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Sat, 9 Aug 2008 01:05:13 +0200
Subject: [PATCH 267/869] PM: Remove WARN_ON from device_pm_add

PM: Remove WARN_ON from device_pm_add

Fix message in device_pm_add() saying that the device will not be
added to dpm_list, although in fact the device is going to be added
to the list regardless of the ordering violation.

Remove the WARN_ON(true) triggered in that situation, because it is
hit by USB very often and spams the users' logs.

This patch fixes bug #11263

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/base/power/main.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 284f564bb12..273a944d404 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -74,11 +74,9 @@ void device_pm_add(struct device *dev)
 		 kobject_name(&dev->kobj));
 	mutex_lock(&dpm_list_mtx);
 	if (dev->parent) {
-		if (dev->parent->power.status >= DPM_SUSPENDING) {
-			dev_warn(dev, "parent %s is sleeping, will not add\n",
+		if (dev->parent->power.status >= DPM_SUSPENDING)
+			dev_warn(dev, "parent %s should not be sleeping\n",
 				dev->parent->bus_id);
-			WARN_ON(true);
-		}
 	} else if (transition_started) {
 		/*
 		 * We refuse to register parentless devices while a PM
-- 
GitLab


From 068281d302def5efd96d84a163ba17e85f5ea564 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Sat, 16 Aug 2008 14:30:30 +0200
Subject: [PATCH 268/869] block: fix partial read() of
 /proc/{partitions,diskstats}

The proc files get truncated if they do not fit into the buffer with
a single read(). We need to move the seq_file index from the callback
of class_find_device() to the caller of class_find_device(), to keep
its value across multiple invocations of the callback.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 block/genhd.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/block/genhd.c b/block/genhd.c
index c13cc77291a..f34befc5484 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -293,25 +293,26 @@ void __init printk_all_partitions(void)
 /* iterator */
 static int find_start(struct device *dev, void *data)
 {
-	loff_t k = *(loff_t *)data;
+	loff_t *k = data;
 
 	if (dev->type != &disk_type)
 		return 0;
-	if (!k--)
+	if (!*k)
 		return 1;
+	(*k)--;
 	return 0;
 }
 
 static void *part_start(struct seq_file *part, loff_t *pos)
 {
 	struct device *dev;
-	loff_t n = *pos;
+	loff_t k = *pos;
 
-	if (!n)
+	if (!k)
 		seq_puts(part, "major minor  #blocks  name\n\n");
 
 	mutex_lock(&block_class_lock);
-	dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
+	dev = class_find_device(&block_class, NULL, &k, find_start);
 	if (dev)
 		return dev_to_disk(dev);
 	return NULL;
@@ -568,9 +569,10 @@ static struct device_type disk_type = {
 static void *diskstats_start(struct seq_file *part, loff_t *pos)
 {
 	struct device *dev;
+	loff_t k = *pos;
 
 	mutex_lock(&block_class_lock);
-	dev = class_find_device(&block_class, NULL, (void *)pos, find_start);
+	dev = class_find_device(&block_class, NULL, &k, find_start);
 	if (dev)
 		return dev_to_disk(dev);
 	return NULL;
-- 
GitLab


From 5c0ef6d0214a08e5c846f4c45228adf135d8d0ef Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Sat, 16 Aug 2008 14:30:30 +0200
Subject: [PATCH 269/869] block: drop references taken by class_find_device()

Otherwise we leak references, which is not a good thing to do.


Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 block/genhd.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/block/genhd.c b/block/genhd.c
index f34befc5484..656c2c7abf9 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -313,8 +313,10 @@ static void *part_start(struct seq_file *part, loff_t *pos)
 
 	mutex_lock(&block_class_lock);
 	dev = class_find_device(&block_class, NULL, &k, find_start);
-	if (dev)
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -331,8 +333,10 @@ static void *part_next(struct seq_file *part, void *v, loff_t *pos)
 	struct device *dev;
 	++*pos;
 	dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
-	if (dev)
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -573,8 +577,10 @@ static void *diskstats_start(struct seq_file *part, loff_t *pos)
 
 	mutex_lock(&block_class_lock);
 	dev = class_find_device(&block_class, NULL, &k, find_start);
-	if (dev)
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -585,8 +591,10 @@ static void *diskstats_next(struct seq_file *part, void *v, loff_t *pos)
 
 	++*pos;
 	dev = class_find_device(&block_class, &gp->dev, NULL, find_next);
-	if (dev)
+	if (dev) {
+		put_device(dev);
 		return dev_to_disk(dev);
+	}
 	return NULL;
 }
 
@@ -714,10 +722,12 @@ dev_t blk_lookup_devt(const char *name, int part)
 	mutex_lock(&block_class_lock);
 	find.name = name;
 	find.part = part;
-	dev = class_find_device(&block_class, NULL, (void *)&find, match_id);
-	if (dev)
+	dev = class_find_device(&block_class, NULL, &find, match_id);
+	if (dev) {
+		put_device(dev);
 		devt = MKDEV(MAJOR(dev->devt),
 			     MINOR(dev->devt) + part);
+	}
 	mutex_unlock(&block_class_lock);
 
 	return devt;
-- 
GitLab


From 331995e78385a0b9860f4c4c1766e842e61c450a Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <Uwe.Kleine-Koenig@digi.com>
Date: Fri, 11 Jul 2008 11:10:36 +0200
Subject: [PATCH 270/869] UIO: uio_pdrv: fix memory leak
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Thanks to Magnus Damm for pointing that out.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/uio/uio_pdrv.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/uio/uio_pdrv.c b/drivers/uio/uio_pdrv.c
index 5d0d2e85d98..aa3bff8f93a 100644
--- a/drivers/uio/uio_pdrv.c
+++ b/drivers/uio/uio_pdrv.c
@@ -88,6 +88,8 @@ static int uio_pdrv_remove(struct platform_device *pdev)
 
 	uio_unregister_device(pdata->uioinfo);
 
+	kfree(pdata);
+
 	return 0;
 }
 
-- 
GitLab


From 0f90927da11d596802d196cf299e91293abc90c5 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <Uwe.Kleine-Koenig@digi.com>
Date: Fri, 11 Jul 2008 11:10:37 +0200
Subject: [PATCH 271/869] UIO: uio_pdrv: fix license specification
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Thanks to Magnus Damm for pointing that out.

Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/uio/uio_pdrv.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/uio/uio_pdrv.c b/drivers/uio/uio_pdrv.c
index aa3bff8f93a..0b4ef39cd85 100644
--- a/drivers/uio/uio_pdrv.c
+++ b/drivers/uio/uio_pdrv.c
@@ -116,5 +116,5 @@ module_exit(uio_pdrv_exit);
 
 MODULE_AUTHOR("Uwe Kleine-Koenig");
 MODULE_DESCRIPTION("Userspace I/O platform driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:" DRIVER_NAME);
-- 
GitLab


From c767db0ab4bc85f06119f2b42369e31b29991f16 Mon Sep 17 00:00:00 2001
From: Magnus Damm <magnus.damm@gmail.com>
Date: Fri, 11 Jul 2008 18:55:27 +0900
Subject: [PATCH 272/869] UIO: generic irq handling for some uio platform
 devices

This is V3 of uio_pdrv_genirq.c, a platform driver for UIO with
generic IRQ handling code. This driver is very similar to the regular
UIO platform driver, but is only suitable for devices that are
connected to the interrupt controller using unique interrupt lines.

The uio_pdrv_genirq driver includes generic interrupt handling code
which disables the serviced interrupt in the interrupt controller
and makes the user space driver responsible for acknowledging the
interrupt in the device and reenabling the interrupt in the interrupt
controller.

Shared interrupts are not supported since the in-kernel interrupt
handler will disable the interrupt line in the interrupt controller,
and in a shared interrupt configuration this will stop other devices
from delivering interrupts.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/uio/Kconfig           |  13 +++
 drivers/uio/Makefile          |   1 +
 drivers/uio/uio_pdrv_genirq.c | 188 ++++++++++++++++++++++++++++++++++
 3 files changed, 202 insertions(+)
 create mode 100644 drivers/uio/uio_pdrv_genirq.c

diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 2e9079df26b..4190be64917 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -33,6 +33,19 @@ config UIO_PDRV
 
 	  If you don't know what to do here, say N.
 
+config UIO_PDRV_GENIRQ
+	tristate "Userspace I/O platform driver with generic IRQ handling"
+	help
+	  Platform driver for Userspace I/O devices, including generic
+	  interrupt handling code. Shared interrupts are not supported.
+
+	  This kernel driver requires that the matching userspace driver
+	  handles interrupts in a special way. Userspace is responsible
+	  for acknowledging the hardware device if needed, and re-enabling
+	  interrupts in the interrupt controller using the write() syscall.
+
+	  If you don't know what to do here, say N.
+
 config UIO_SMX
 	tristate "SMX cryptengine UIO interface"
 	default n
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index e00ce0def1a..8667bbdef90 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -1,4 +1,5 @@
 obj-$(CONFIG_UIO)	+= uio.o
 obj-$(CONFIG_UIO_CIF)	+= uio_cif.o
 obj-$(CONFIG_UIO_PDRV)	+= uio_pdrv.o
+obj-$(CONFIG_UIO_PDRV_GENIRQ)	+= uio_pdrv_genirq.o
 obj-$(CONFIG_UIO_SMX)	+= uio_smx.o
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
new file mode 100644
index 00000000000..1f82c83a92a
--- /dev/null
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -0,0 +1,188 @@
+/*
+ * drivers/uio/uio_pdrv_genirq.c
+ *
+ * Userspace I/O platform driver with generic IRQ handling code.
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on uio_pdrv.c by Uwe Kleine-Koenig,
+ * Copyright (C) 2008 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/uio_driver.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/stringify.h>
+
+#define DRIVER_NAME "uio_pdrv_genirq"
+
+struct uio_pdrv_genirq_platdata {
+	struct uio_info *uioinfo;
+	spinlock_t lock;
+	unsigned long flags;
+};
+
+static irqreturn_t uio_pdrv_genirq_handler(int irq, struct uio_info *dev_info)
+{
+	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
+
+	/* Just disable the interrupt in the interrupt controller, and
+	 * remember the state so we can allow user space to enable it later.
+	 */
+
+	if (!test_and_set_bit(0, &priv->flags))
+		disable_irq_nosync(irq);
+
+	return IRQ_HANDLED;
+}
+
+static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
+{
+	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
+	unsigned long flags;
+
+	/* Allow user space to enable and disable the interrupt
+	 * in the interrupt controller, but keep track of the
+	 * state to prevent per-irq depth damage.
+	 *
+	 * Serialize this operation to support multiple tasks.
+	 */
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (irq_on) {
+		if (test_and_clear_bit(0, &priv->flags))
+			enable_irq(dev_info->irq);
+	} else {
+		if (!test_and_set_bit(0, &priv->flags))
+			disable_irq(dev_info->irq);
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	return 0;
+}
+
+static int uio_pdrv_genirq_probe(struct platform_device *pdev)
+{
+	struct uio_info *uioinfo = pdev->dev.platform_data;
+	struct uio_pdrv_genirq_platdata *priv;
+	struct uio_mem *uiomem;
+	int ret = -EINVAL;
+	int i;
+
+	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
+		dev_err(&pdev->dev, "missing platform_data\n");
+		goto bad0;
+	}
+
+	if (uioinfo->handler || uioinfo->irqcontrol || uioinfo->irq_flags) {
+		dev_err(&pdev->dev, "interrupt configuration error\n");
+		goto bad0;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "unable to kmalloc\n");
+		goto bad0;
+	}
+
+	priv->uioinfo = uioinfo;
+	spin_lock_init(&priv->lock);
+	priv->flags = 0; /* interrupt is enabled to begin with */
+
+	uiomem = &uioinfo->mem[0];
+
+	for (i = 0; i < pdev->num_resources; ++i) {
+		struct resource *r = &pdev->resource[i];
+
+		if (r->flags != IORESOURCE_MEM)
+			continue;
+
+		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
+			dev_warn(&pdev->dev, "device has more than "
+					__stringify(MAX_UIO_MAPS)
+					" I/O memory resources.\n");
+			break;
+		}
+
+		uiomem->memtype = UIO_MEM_PHYS;
+		uiomem->addr = r->start;
+		uiomem->size = r->end - r->start + 1;
+		++uiomem;
+	}
+
+	while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
+		uiomem->size = 0;
+		++uiomem;
+	}
+
+	/* This driver requires no hardware specific kernel code to handle
+	 * interrupts. Instead, the interrupt handler simply disables the
+	 * interrupt in the interrupt controller. User space is responsible
+	 * for performing hardware specific acknowledge and re-enabling of
+	 * the interrupt in the interrupt controller.
+	 *
+	 * Interrupt sharing is not supported.
+	 */
+
+	uioinfo->irq_flags = IRQF_DISABLED;
+	uioinfo->handler = uio_pdrv_genirq_handler;
+	uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
+	uioinfo->priv = priv;
+
+	ret = uio_register_device(&pdev->dev, priv->uioinfo);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to register uio device\n");
+		goto bad1;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	return 0;
+ bad1:
+	kfree(priv);
+ bad0:
+	return ret;
+}
+
+static int uio_pdrv_genirq_remove(struct platform_device *pdev)
+{
+	struct uio_pdrv_genirq_platdata *priv = platform_get_drvdata(pdev);
+
+	uio_unregister_device(priv->uioinfo);
+	kfree(priv);
+	return 0;
+}
+
+static struct platform_driver uio_pdrv_genirq = {
+	.probe = uio_pdrv_genirq_probe,
+	.remove = uio_pdrv_genirq_remove,
+	.driver = {
+		.name = DRIVER_NAME,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init uio_pdrv_genirq_init(void)
+{
+	return platform_driver_register(&uio_pdrv_genirq);
+}
+
+static void __exit uio_pdrv_genirq_exit(void)
+{
+	platform_driver_unregister(&uio_pdrv_genirq);
+}
+
+module_init(uio_pdrv_genirq_init);
+module_exit(uio_pdrv_genirq_exit);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Userspace I/O platform driver with generic IRQ handling");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRIVER_NAME);
-- 
GitLab


From 5e4c6564c95ce127beeefe75e15cd11c93487436 Mon Sep 17 00:00:00 2001
From: Kay Sievers <kay.sievers@vrfy.org>
Date: Thu, 21 Aug 2008 15:28:56 +0200
Subject: [PATCH 273/869] pnp: fix "add acpi:* modalias entries"

With 22454cb99fc39f2629ad06a7eccb3df312f8830e we added only the
first entry of the device table. We need to loop over the whole
device list.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 scripts/mod/file2alias.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 4fa1f3ad251..4c9890ec252 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -344,14 +344,20 @@ static void do_pnp_device_entry(void *symval, unsigned long size,
 				struct module *mod)
 {
 	const unsigned long id_size = sizeof(struct pnp_device_id);
-	const struct pnp_device_id *id = symval;
+	const unsigned int count = (size / id_size)-1;
+	const struct pnp_device_id *devs = symval;
+	unsigned int i;
 
 	device_id_check(mod->name, "pnp", size, id_size, symval);
 
-	buf_printf(&mod->dev_table_buf,
-		   "MODULE_ALIAS(\"pnp:d%s*\");\n", id->id);
-	buf_printf(&mod->dev_table_buf,
-		   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id->id);
+	for (i = 0; i < count; i++) {
+		const char *id = (char *)devs[i].id;
+
+		buf_printf(&mod->dev_table_buf,
+			   "MODULE_ALIAS(\"pnp:d%s*\");\n", id);
+		buf_printf(&mod->dev_table_buf,
+			   "MODULE_ALIAS(\"acpi*:%s:*\");\n", id);
+	}
 }
 
 /* looks like: "pnp:dD" for every device of the card */
-- 
GitLab


From 380ec6780a0461bb4a4592484d6fe75aa096edeb Mon Sep 17 00:00:00 2001
From: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Date: Wed, 20 Aug 2008 00:06:22 +0200
Subject: [PATCH 274/869] USB: ISP1760: fixed trivial math in comment

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Acked-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/host/isp1760-hcd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index d22a84f86a3..8017f1cf78e 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -988,7 +988,7 @@ static void do_atl_int(struct usb_hcd *usb_hcd)
 		/*
 		 * write bank1 address twice to ensure the 90ns delay (time
 		 * between BANK0 write and the priv_read_copy() call is at
-		 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns)
+		 * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 109ns)
 		 */
 		isp1760_writel(payload  + ISP_BANK(1), usb_hcd->regs +
 				HC_MEMORY_REG);
-- 
GitLab


From f8033827d8e92db6159d34ed45c608522674ecd8 Mon Sep 17 00:00:00 2001
From: Hiroshi Miura <miurahr@nttdata.co.jp>
Date: Tue, 19 Aug 2008 10:58:25 +0200
Subject: [PATCH 275/869] usb-serial: option support HSDPA modem A2502

This patch  support  NTT DoCoMo A2502 3G/HSDPA modem on option driver.
It is produced by AnyDATA Corp. and also sold as KT Freetelecom (Korea) ADU 620UW.

It support 3.6Mbps/7.2Mbps hight speed communication.
I have tested A2502 with NTT DoCoMo MoperaU ISP service.


Signed-off-by: Hiroshi Miura <miurahr@nttdata.co.jp>
Signed-off-by: Matthias Urlichs <matthias@urlichs.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e143198aeb0..9f9cd36455f 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -173,6 +173,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define KYOCERA_PRODUCT_KPC680			0x180a
 
 #define ANYDATA_VENDOR_ID			0x16d5
+#define ANYDATA_PRODUCT_ADU_620UW		0x6202
 #define ANYDATA_PRODUCT_ADU_E100A		0x6501
 #define ANYDATA_PRODUCT_ADU_500A		0x6502
 
@@ -318,6 +319,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8138) },	/* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
 	{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
 	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
-- 
GitLab


From 77571f05a483c0259e42ba2f482c82debc9a63af Mon Sep 17 00:00:00 2001
From: Oliver Neukum <oliver@neukum.org>
Date: Mon, 18 Aug 2008 16:36:52 +0200
Subject: [PATCH 276/869] USB: fix bug in usb_unlink_anchored_urbs()

Irqs must not accidentally be reenabled.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/urb.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c
index c0b1ae25ae2..47111e88f79 100644
--- a/drivers/usb/core/urb.c
+++ b/drivers/usb/core/urb.c
@@ -601,15 +601,20 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);
 void usb_unlink_anchored_urbs(struct usb_anchor *anchor)
 {
 	struct urb *victim;
+	unsigned long flags;
 
-	spin_lock_irq(&anchor->lock);
+	spin_lock_irqsave(&anchor->lock, flags);
 	while (!list_empty(&anchor->urb_list)) {
 		victim = list_entry(anchor->urb_list.prev, struct urb,
 				    anchor_list);
+		usb_get_urb(victim);
+		spin_unlock_irqrestore(&anchor->lock, flags);
 		/* this will unanchor the URB */
 		usb_unlink_urb(victim);
+		usb_put_urb(victim);
+		spin_lock_irqsave(&anchor->lock, flags);
 	}
-	spin_unlock_irq(&anchor->lock);
+	spin_unlock_irqrestore(&anchor->lock, flags);
 }
 EXPORT_SYMBOL_GPL(usb_unlink_anchored_urbs);
 
-- 
GitLab


From c8fd2c37b99c55c8d24888e0ed9d5f4f73458c9c Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@sandeen.net>
Date: Thu, 14 Aug 2008 08:25:40 -0500
Subject: [PATCH 277/869] USB: cdc-acm: quirk for Conexant CX93010 USB modem

This patch gets my Rosewill RNX-56USB USB modem (with Conexant CX93010
chipset) up and running to the point where I can send AT commands and
retrieve caller ID data, which is all I want to do with it.

Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/class/cdc-acm.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index efc4373eded..382522eb1f7 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1362,6 +1362,9 @@ static struct usb_device_id acm_ids[] = {
 	{ USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */
 	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
 	},
+	{ USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */
+	.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+	},
 
 	/* control interfaces with various AT-command sets */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
-- 
GitLab


From bf31338bfd5d04434adf2294255847bb7dad687a Mon Sep 17 00:00:00 2001
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: Mon, 11 Aug 2008 18:28:13 +0200
Subject: [PATCH 278/869] USB: Fix pxa27x_udc usb speed handling.

The new composite framework revealed a weakness in the
pxa27x_udc driver gadget register function. Instead of
checking if speed asked for was USB_LOW_SPEED upon
usb_gadget_register() to deny service, it checked only
for USB_FULL_SPEED, thus denying service to usb high
speed capable gadgets (like g_ether).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/gadget/pxa27x_udc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index a28513ecbe5..7cbc78a6853 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1622,7 +1622,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
 	struct pxa_udc *udc = the_controller;
 	int retval;
 
-	if (!driver || driver->speed != USB_SPEED_FULL || !driver->bind
+	if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind
 			|| !driver->disconnect || !driver->setup)
 		return -EINVAL;
 	if (!udc)
-- 
GitLab


From 746cdd0b2d1254b11382789b6630c4d379bdcf13 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@nokia.com>
Date: Sun, 10 Aug 2008 21:22:34 +0300
Subject: [PATCH 279/869] usb: musb: get rid of procfs entry

Drivers should not add procfs. The functionality in the old
procfs file will be moved to debugfs.

Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/Makefile      |   5 -
 drivers/usb/musb/musb_core.c   |  21 +-
 drivers/usb/musb/musb_core.h   |  19 -
 drivers/usb/musb/musb_procfs.c | 830 ---------------------------------
 4 files changed, 11 insertions(+), 864 deletions(-)
 delete mode 100644 drivers/usb/musb/musb_procfs.c

diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 88eb67de08a..860369c7cbe 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -76,11 +76,6 @@ endif
 
 ifneq ($(MUSB_DEBUG),0)
     EXTRA_CFLAGS += -DDEBUG
-
-    ifeq ($(CONFIG_PROC_FS),y)
-	musb_hdrc-objs		+= musb_procfs.o
-    endif
-
 endif
 
 EXTRA_CFLAGS += -DMUSB_DEBUG=$(MUSB_DEBUG)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index d68ec6daf33..99690ba436d 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2037,6 +2037,8 @@ bad_config:
 		musb->xceiv.state = OTG_STATE_A_IDLE;
 
 		status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+		if (status)
+			goto fail;
 
 		DBG(1, "%s mode, status %d, devctl %02x %c\n",
 			"HOST", status,
@@ -2051,6 +2053,8 @@ bad_config:
 		musb->xceiv.state = OTG_STATE_B_IDLE;
 
 		status = musb_gadget_setup(musb);
+		if (status)
+			goto fail;
 
 		DBG(1, "%s mode, status %d, dev%02x\n",
 			is_otg_enabled(musb) ? "OTG" : "PERIPHERAL",
@@ -2059,16 +2063,14 @@ bad_config:
 
 	}
 
-	if (status == 0)
-		musb_debug_create("driver/musb_hdrc", musb);
-	else {
+	return 0;
+
 fail:
-		if (musb->clock)
-			clk_put(musb->clock);
-		device_init_wakeup(dev, 0);
-		musb_free(musb);
-		return status;
-	}
+	if (musb->clock)
+		clk_put(musb->clock);
+	device_init_wakeup(dev, 0);
+	musb_free(musb);
+	return status;
 
 #ifdef CONFIG_SYSFS
 	status = device_create_file(dev, &dev_attr_mode);
@@ -2131,7 +2133,6 @@ static int __devexit musb_remove(struct platform_device *pdev)
 	 *  - OTG mode: both roles are deactivated (or never-activated)
 	 */
 	musb_shutdown(pdev);
-	musb_debug_delete("driver/musb_hdrc", musb);
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
 	if (musb->board_mode == MUSB_HOST)
 		usb_remove_hcd(musb_to_hcd(musb));
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index eade46d8170..82227251931 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -485,23 +485,4 @@ extern int musb_platform_get_vbus_status(struct musb *musb);
 extern int __init musb_platform_init(struct musb *musb);
 extern int musb_platform_exit(struct musb *musb);
 
-/*-------------------------- ProcFS definitions ---------------------*/
-
-struct proc_dir_entry;
-
-#if (MUSB_DEBUG > 0) && defined(MUSB_CONFIG_PROC_FS)
-extern struct proc_dir_entry *musb_debug_create(char *name, struct musb *data);
-extern void musb_debug_delete(char *name, struct musb *data);
-
-#else
-static inline struct proc_dir_entry *
-musb_debug_create(char *name, struct musb *data)
-{
-	return NULL;
-}
-static inline void musb_debug_delete(char *name, struct musb *data)
-{
-}
-#endif
-
 #endif	/* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_procfs.c b/drivers/usb/musb/musb_procfs.c
deleted file mode 100644
index 55e6b78bdcc..00000000000
--- a/drivers/usb/musb/musb_procfs.c
+++ /dev/null
@@ -1,830 +0,0 @@
-/*
- * MUSB OTG driver debug support
- *
- * Copyright 2005 Mentor Graphics Corporation
- * Copyright (C) 2005-2006 by Texas Instruments
- * Copyright (C) 2006-2007 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- * NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>	/* FIXME remove procfs writes */
-#include <asm/arch/hardware.h>
-
-#include "musb_core.h"
-
-#include "davinci.h"
-
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-
-static int dump_qh(struct musb_qh *qh, char *buf, unsigned max)
-{
-	int				count;
-	int				tmp;
-	struct usb_host_endpoint	*hep = qh->hep;
-	struct urb			*urb;
-
-	count = snprintf(buf, max, "    qh %p dev%d ep%d%s max%d\n",
-			qh, qh->dev->devnum, qh->epnum,
-			({ char *s; switch (qh->type) {
-			case USB_ENDPOINT_XFER_BULK:
-				s = "-bulk"; break;
-			case USB_ENDPOINT_XFER_INT:
-				s = "-int"; break;
-			case USB_ENDPOINT_XFER_CONTROL:
-				s = ""; break;
-			default:
-				s = "iso"; break;
-			}; s; }),
-			qh->maxpacket);
-	if (count <= 0)
-		return 0;
-	buf += count;
-	max -= count;
-
-	list_for_each_entry(urb, &hep->urb_list, urb_list) {
-		tmp = snprintf(buf, max, "\t%s urb %p %d/%d\n",
-				usb_pipein(urb->pipe) ? "in" : "out",
-				urb, urb->actual_length,
-				urb->transfer_buffer_length);
-		if (tmp <= 0)
-			break;
-		tmp = min(tmp, (int)max);
-		count += tmp;
-		buf += tmp;
-		max -= tmp;
-	}
-	return count;
-}
-
-static int
-dump_queue(struct list_head *q, char *buf, unsigned max)
-{
-	int		count = 0;
-	struct musb_qh	*qh;
-
-	list_for_each_entry(qh, q, ring) {
-		int	tmp;
-
-		tmp = dump_qh(qh, buf, max);
-		if (tmp <= 0)
-			break;
-		tmp = min(tmp, (int)max);
-		count += tmp;
-		buf += tmp;
-		max -= tmp;
-	}
-	return count;
-}
-
-#endif	/* HCD */
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-static int dump_ep(struct musb_ep *ep, char *buffer, unsigned max)
-{
-	char		*buf = buffer;
-	int		code = 0;
-	void __iomem	*regs = ep->hw_ep->regs;
-	char		*mode = "1buf";
-
-	if (ep->is_in) {
-		if (ep->hw_ep->tx_double_buffered)
-			mode = "2buf";
-	} else {
-		if (ep->hw_ep->rx_double_buffered)
-			mode = "2buf";
-	}
-
-	do {
-		struct usb_request	*req;
-
-		code = snprintf(buf, max,
-				"\n%s (hw%d): %s%s, csr %04x maxp %04x\n",
-				ep->name, ep->current_epnum,
-				mode, ep->dma ? " dma" : "",
-				musb_readw(regs,
-					(ep->is_in || !ep->current_epnum)
-						? MUSB_TXCSR
-						: MUSB_RXCSR),
-				musb_readw(regs, ep->is_in
-						? MUSB_TXMAXP
-						: MUSB_RXMAXP)
-				);
-		if (code <= 0)
-			break;
-		code = min(code, (int) max);
-		buf += code;
-		max -= code;
-
-		if (is_cppi_enabled() && ep->current_epnum) {
-			unsigned	cppi = ep->current_epnum - 1;
-			void __iomem	*base = ep->musb->ctrl_base;
-			unsigned	off1 = cppi << 2;
-			void __iomem	*ram = base;
-			char		tmp[16];
-
-			if (ep->is_in) {
-				ram += DAVINCI_TXCPPI_STATERAM_OFFSET(cppi);
-				tmp[0] = 0;
-			} else {
-				ram += DAVINCI_RXCPPI_STATERAM_OFFSET(cppi);
-				snprintf(tmp, sizeof tmp, "%d left, ",
-					musb_readl(base,
-					DAVINCI_RXCPPI_BUFCNT0_REG + off1));
-			}
-
-			code = snprintf(buf, max, "%cX DMA%d: %s"
-					"%08x %08x, %08x %08x; "
-					"%08x %08x %08x .. %08x\n",
-				ep->is_in ? 'T' : 'R',
-				ep->current_epnum - 1, tmp,
-				musb_readl(ram, 0 * 4),
-				musb_readl(ram, 1 * 4),
-				musb_readl(ram, 2 * 4),
-				musb_readl(ram, 3 * 4),
-				musb_readl(ram, 4 * 4),
-				musb_readl(ram, 5 * 4),
-				musb_readl(ram, 6 * 4),
-				musb_readl(ram, 7 * 4));
-			if (code <= 0)
-				break;
-			code = min(code, (int) max);
-			buf += code;
-			max -= code;
-		}
-
-		if (list_empty(&ep->req_list)) {
-			code = snprintf(buf, max, "\t(queue empty)\n");
-			if (code <= 0)
-				break;
-			code = min(code, (int) max);
-			buf += code;
-			max -= code;
-			break;
-		}
-		list_for_each_entry(req, &ep->req_list, list) {
-			code = snprintf(buf, max, "\treq %p, %s%s%d/%d\n",
-					req,
-					req->zero ? "zero, " : "",
-					req->short_not_ok ? "!short, " : "",
-					req->actual, req->length);
-			if (code <= 0)
-				break;
-			code = min(code, (int) max);
-			buf += code;
-			max -= code;
-		}
-	} while (0);
-	return buf - buffer;
-}
-#endif
-
-static int
-dump_end_info(struct musb *musb, u8 epnum, char *aBuffer, unsigned max)
-{
-	int			code = 0;
-	char			*buf = aBuffer;
-	struct musb_hw_ep	*hw_ep = &musb->endpoints[epnum];
-
-	do {
-		musb_ep_select(musb->mregs, epnum);
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
-		if (is_host_active(musb)) {
-			int		dump_rx, dump_tx;
-			void __iomem	*regs = hw_ep->regs;
-
-			/* TEMPORARY (!) until we have a real periodic
-			 * schedule tree ...
-			 */
-			if (!epnum) {
-				/* control is shared, uses RX queue
-				 * but (mostly) shadowed tx registers
-				 */
-				dump_tx = !list_empty(&musb->control);
-				dump_rx = 0;
-			} else if (hw_ep == musb->bulk_ep) {
-				dump_tx = !list_empty(&musb->out_bulk);
-				dump_rx = !list_empty(&musb->in_bulk);
-			} else if (musb->periodic[epnum]) {
-				struct usb_host_endpoint	*hep;
-
-				hep = musb->periodic[epnum]->hep;
-				dump_rx = hep->desc.bEndpointAddress
-						& USB_ENDPOINT_DIR_MASK;
-				dump_tx = !dump_rx;
-			} else
-				break;
-			/* END TEMPORARY */
-
-
-			if (dump_rx) {
-				code = snprintf(buf, max,
-					"\nRX%d: %s rxcsr %04x interval %02x "
-					"max %04x type %02x; "
-					"dev %d hub %d port %d"
-					"\n",
-					epnum,
-					hw_ep->rx_double_buffered
-						? "2buf" : "1buf",
-					musb_readw(regs, MUSB_RXCSR),
-					musb_readb(regs, MUSB_RXINTERVAL),
-					musb_readw(regs, MUSB_RXMAXP),
-					musb_readb(regs, MUSB_RXTYPE),
-					/* FIXME:  assumes multipoint */
-					musb_readb(musb->mregs,
-						MUSB_BUSCTL_OFFSET(epnum,
-						MUSB_RXFUNCADDR)),
-					musb_readb(musb->mregs,
-						MUSB_BUSCTL_OFFSET(epnum,
-						MUSB_RXHUBADDR)),
-					musb_readb(musb->mregs,
-						MUSB_BUSCTL_OFFSET(epnum,
-						MUSB_RXHUBPORT))
-					);
-				if (code <= 0)
-					break;
-				code = min(code, (int) max);
-				buf += code;
-				max -= code;
-
-				if (is_cppi_enabled()
-						&& epnum
-						&& hw_ep->rx_channel) {
-					unsigned	cppi = epnum - 1;
-					unsigned	off1 = cppi << 2;
-					void __iomem	*base;
-					void __iomem	*ram;
-					char		tmp[16];
-
-					base = musb->ctrl_base;
-					ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
-							cppi) + base;
-					snprintf(tmp, sizeof tmp, "%d left, ",
-						musb_readl(base,
-						DAVINCI_RXCPPI_BUFCNT0_REG
-								+ off1));
-
-					code = snprintf(buf, max,
-						"    rx dma%d: %s"
-						"%08x %08x, %08x %08x; "
-						"%08x %08x %08x .. %08x\n",
-						cppi, tmp,
-						musb_readl(ram, 0 * 4),
-						musb_readl(ram, 1 * 4),
-						musb_readl(ram, 2 * 4),
-						musb_readl(ram, 3 * 4),
-						musb_readl(ram, 4 * 4),
-						musb_readl(ram, 5 * 4),
-						musb_readl(ram, 6 * 4),
-						musb_readl(ram, 7 * 4));
-					if (code <= 0)
-						break;
-					code = min(code, (int) max);
-					buf += code;
-					max -= code;
-				}
-
-				if (hw_ep == musb->bulk_ep
-						&& !list_empty(
-							&musb->in_bulk)) {
-					code = dump_queue(&musb->in_bulk,
-							buf, max);
-					if (code <= 0)
-						break;
-					code = min(code, (int) max);
-					buf += code;
-					max -= code;
-				} else if (musb->periodic[epnum]) {
-					code = dump_qh(musb->periodic[epnum],
-							buf, max);
-					if (code <= 0)
-						break;
-					code = min(code, (int) max);
-					buf += code;
-					max -= code;
-				}
-			}
-
-			if (dump_tx) {
-				code = snprintf(buf, max,
-					"\nTX%d: %s txcsr %04x interval %02x "
-					"max %04x type %02x; "
-					"dev %d hub %d port %d"
-					"\n",
-					epnum,
-					hw_ep->tx_double_buffered
-						? "2buf" : "1buf",
-					musb_readw(regs, MUSB_TXCSR),
-					musb_readb(regs, MUSB_TXINTERVAL),
-					musb_readw(regs, MUSB_TXMAXP),
-					musb_readb(regs, MUSB_TXTYPE),
-					/* FIXME:  assumes multipoint */
-					musb_readb(musb->mregs,
-						MUSB_BUSCTL_OFFSET(epnum,
-						MUSB_TXFUNCADDR)),
-					musb_readb(musb->mregs,
-						MUSB_BUSCTL_OFFSET(epnum,
-						MUSB_TXHUBADDR)),
-					musb_readb(musb->mregs,
-						MUSB_BUSCTL_OFFSET(epnum,
-						MUSB_TXHUBPORT))
-					);
-				if (code <= 0)
-					break;
-				code = min(code, (int) max);
-				buf += code;
-				max -= code;
-
-				if (is_cppi_enabled()
-						&& epnum
-						&& hw_ep->tx_channel) {
-					unsigned	cppi = epnum - 1;
-					void __iomem	*base;
-					void __iomem	*ram;
-
-					base = musb->ctrl_base;
-					ram = DAVINCI_RXCPPI_STATERAM_OFFSET(
-							cppi) + base;
-					code = snprintf(buf, max,
-						"    tx dma%d: "
-						"%08x %08x, %08x %08x; "
-						"%08x %08x %08x .. %08x\n",
-						cppi,
-						musb_readl(ram, 0 * 4),
-						musb_readl(ram, 1 * 4),
-						musb_readl(ram, 2 * 4),
-						musb_readl(ram, 3 * 4),
-						musb_readl(ram, 4 * 4),
-						musb_readl(ram, 5 * 4),
-						musb_readl(ram, 6 * 4),
-						musb_readl(ram, 7 * 4));
-					if (code <= 0)
-						break;
-					code = min(code, (int) max);
-					buf += code;
-					max -= code;
-				}
-
-				if (hw_ep == musb->control_ep
-						&& !list_empty(
-							&musb->control)) {
-					code = dump_queue(&musb->control,
-							buf, max);
-					if (code <= 0)
-						break;
-					code = min(code, (int) max);
-					buf += code;
-					max -= code;
-				} else if (hw_ep == musb->bulk_ep
-						&& !list_empty(
-							&musb->out_bulk)) {
-					code = dump_queue(&musb->out_bulk,
-							buf, max);
-					if (code <= 0)
-						break;
-					code = min(code, (int) max);
-					buf += code;
-					max -= code;
-				} else if (musb->periodic[epnum]) {
-					code = dump_qh(musb->periodic[epnum],
-							buf, max);
-					if (code <= 0)
-						break;
-					code = min(code, (int) max);
-					buf += code;
-					max -= code;
-				}
-			}
-		}
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-		if (is_peripheral_active(musb)) {
-			code = 0;
-
-			if (hw_ep->ep_in.desc || !epnum) {
-				code = dump_ep(&hw_ep->ep_in, buf, max);
-				if (code <= 0)
-					break;
-				code = min(code, (int) max);
-				buf += code;
-				max -= code;
-			}
-			if (hw_ep->ep_out.desc) {
-				code = dump_ep(&hw_ep->ep_out, buf, max);
-				if (code <= 0)
-					break;
-				code = min(code, (int) max);
-				buf += code;
-				max -= code;
-			}
-		}
-#endif
-	} while (0);
-
-	return buf - aBuffer;
-}
-
-/* Dump the current status and compile options.
- * @param musb the device driver instance
- * @param buffer where to dump the status; it must be big enough to hold the
- * result otherwise "BAD THINGS HAPPENS(TM)".
- */
-static int dump_header_stats(struct musb *musb, char *buffer)
-{
-	int code, count = 0;
-	const void __iomem *mbase = musb->mregs;
-
-	*buffer = 0;
-	count = sprintf(buffer, "Status: %sHDRC, Mode=%s "
-				"(Power=%02x, DevCtl=%02x)\n",
-			(musb->is_multipoint ? "M" : ""), MUSB_MODE(musb),
-			musb_readb(mbase, MUSB_POWER),
-			musb_readb(mbase, MUSB_DEVCTL));
-	if (count <= 0)
-		return 0;
-	buffer += count;
-
-	code = sprintf(buffer, "OTG state: %s; %sactive\n",
-			otg_state_string(musb),
-			musb->is_active ? "" : "in");
-	if (code <= 0)
-		goto done;
-	buffer += code;
-	count += code;
-
-	code = sprintf(buffer,
-			"Options: "
-#ifdef CONFIG_MUSB_PIO_ONLY
-			"pio"
-#elif defined(CONFIG_USB_TI_CPPI_DMA)
-			"cppi-dma"
-#elif defined(CONFIG_USB_INVENTRA_DMA)
-			"musb-dma"
-#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
-			"tusb-omap-dma"
-#else
-			"?dma?"
-#endif
-			", "
-#ifdef CONFIG_USB_MUSB_OTG
-			"otg (peripheral+host)"
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
-			"peripheral"
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
-			"host"
-#endif
-			", debug=%d [eps=%d]\n",
-		debug,
-		musb->nr_endpoints);
-	if (code <= 0)
-		goto done;
-	count += code;
-	buffer += code;
-
-#ifdef	CONFIG_USB_GADGET_MUSB_HDRC
-	code = sprintf(buffer, "Peripheral address: %02x\n",
-			musb_readb(musb->ctrl_base, MUSB_FADDR));
-	if (code <= 0)
-		goto done;
-	buffer += code;
-	count += code;
-#endif
-
-#ifdef	CONFIG_USB_MUSB_HDRC_HCD
-	code = sprintf(buffer, "Root port status: %08x\n",
-			musb->port1_status);
-	if (code <= 0)
-		goto done;
-	buffer += code;
-	count += code;
-#endif
-
-#ifdef	CONFIG_ARCH_DAVINCI
-	code = sprintf(buffer,
-			"DaVinci: ctrl=%02x stat=%1x phy=%03x\n"
-			"\trndis=%05x auto=%04x intsrc=%08x intmsk=%08x"
-			"\n",
-			musb_readl(musb->ctrl_base, DAVINCI_USB_CTRL_REG),
-			musb_readl(musb->ctrl_base, DAVINCI_USB_STAT_REG),
-			__raw_readl((void __force __iomem *)
-					IO_ADDRESS(USBPHY_CTL_PADDR)),
-			musb_readl(musb->ctrl_base, DAVINCI_RNDIS_REG),
-			musb_readl(musb->ctrl_base, DAVINCI_AUTOREQ_REG),
-			musb_readl(musb->ctrl_base,
-					DAVINCI_USB_INT_SOURCE_REG),
-			musb_readl(musb->ctrl_base,
-					DAVINCI_USB_INT_MASK_REG));
-	if (code <= 0)
-		goto done;
-	count += code;
-	buffer += code;
-#endif	/* DAVINCI */
-
-#ifdef CONFIG_USB_TUSB6010
-	code = sprintf(buffer,
-			"TUSB6010: devconf %08x, phy enable %08x drive %08x"
-			"\n\totg %03x timer %08x"
-			"\n\tprcm conf %08x mgmt %08x; int src %08x mask %08x"
-			"\n",
-			musb_readl(musb->ctrl_base, TUSB_DEV_CONF),
-			musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL_ENABLE),
-			musb_readl(musb->ctrl_base, TUSB_PHY_OTG_CTRL),
-			musb_readl(musb->ctrl_base, TUSB_DEV_OTG_STAT),
-			musb_readl(musb->ctrl_base, TUSB_DEV_OTG_TIMER),
-			musb_readl(musb->ctrl_base, TUSB_PRCM_CONF),
-			musb_readl(musb->ctrl_base, TUSB_PRCM_MNGMT),
-			musb_readl(musb->ctrl_base, TUSB_INT_SRC),
-			musb_readl(musb->ctrl_base, TUSB_INT_MASK));
-	if (code <= 0)
-		goto done;
-	count += code;
-	buffer += code;
-#endif	/* DAVINCI */
-
-	if (is_cppi_enabled() && musb->dma_controller) {
-		code = sprintf(buffer,
-				"CPPI: txcr=%d txsrc=%01x txena=%01x; "
-				"rxcr=%d rxsrc=%01x rxena=%01x "
-				"\n",
-				musb_readl(musb->ctrl_base,
-						DAVINCI_TXCPPI_CTRL_REG),
-				musb_readl(musb->ctrl_base,
-						DAVINCI_TXCPPI_RAW_REG),
-				musb_readl(musb->ctrl_base,
-						DAVINCI_TXCPPI_INTENAB_REG),
-				musb_readl(musb->ctrl_base,
-						DAVINCI_RXCPPI_CTRL_REG),
-				musb_readl(musb->ctrl_base,
-						DAVINCI_RXCPPI_RAW_REG),
-				musb_readl(musb->ctrl_base,
-						DAVINCI_RXCPPI_INTENAB_REG));
-		if (code <= 0)
-			goto done;
-		count += code;
-		buffer += code;
-	}
-
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
-	if (is_peripheral_enabled(musb)) {
-		code = sprintf(buffer, "Gadget driver: %s\n",
-				musb->gadget_driver
-					? musb->gadget_driver->driver.name
-					: "(none)");
-		if (code <= 0)
-			goto done;
-		count += code;
-		buffer += code;
-	}
-#endif
-
-done:
-	return count;
-}
-
-/* Write to ProcFS
- *
- * C soft-connect
- * c soft-disconnect
- * I enable HS
- * i disable HS
- * s stop session
- * F force session (OTG-unfriendly)
- * E rElinquish bus (OTG)
- * H request host mode
- * h cancel host request
- * T start sending TEST_PACKET
- * D<num> set/query the debug level
- */
-static int musb_proc_write(struct file *file, const char __user *buffer,
-			unsigned long count, void *data)
-{
-	char cmd;
-	u8 reg;
-	struct musb *musb = (struct musb *)data;
-	void __iomem *mbase = musb->mregs;
-
-	/* MOD_INC_USE_COUNT; */
-
-	if (unlikely(copy_from_user(&cmd, buffer, 1)))
-		return -EFAULT;
-
-	switch (cmd) {
-	case 'C':
-		if (mbase) {
-			reg = musb_readb(mbase, MUSB_POWER)
-					| MUSB_POWER_SOFTCONN;
-			musb_writeb(mbase, MUSB_POWER, reg);
-		}
-		break;
-
-	case 'c':
-		if (mbase) {
-			reg = musb_readb(mbase, MUSB_POWER)
-					& ~MUSB_POWER_SOFTCONN;
-			musb_writeb(mbase, MUSB_POWER, reg);
-		}
-		break;
-
-	case 'I':
-		if (mbase) {
-			reg = musb_readb(mbase, MUSB_POWER)
-					| MUSB_POWER_HSENAB;
-			musb_writeb(mbase, MUSB_POWER, reg);
-		}
-		break;
-
-	case 'i':
-		if (mbase) {
-			reg = musb_readb(mbase, MUSB_POWER)
-					& ~MUSB_POWER_HSENAB;
-			musb_writeb(mbase, MUSB_POWER, reg);
-		}
-		break;
-
-	case 'F':
-		reg = musb_readb(mbase, MUSB_DEVCTL);
-		reg |= MUSB_DEVCTL_SESSION;
-		musb_writeb(mbase, MUSB_DEVCTL, reg);
-		break;
-
-	case 'H':
-		if (mbase) {
-			reg = musb_readb(mbase, MUSB_DEVCTL);
-			reg |= MUSB_DEVCTL_HR;
-			musb_writeb(mbase, MUSB_DEVCTL, reg);
-			/* MUSB_HST_MODE( ((struct musb*)data) ); */
-			/* WARNING("Host Mode\n"); */
-		}
-		break;
-
-	case 'h':
-		if (mbase) {
-			reg = musb_readb(mbase, MUSB_DEVCTL);
-			reg &= ~MUSB_DEVCTL_HR;
-			musb_writeb(mbase, MUSB_DEVCTL, reg);
-		}
-		break;
-
-	case 'T':
-		if (mbase) {
-			musb_load_testpacket(musb);
-			musb_writeb(mbase, MUSB_TESTMODE,
-					MUSB_TEST_PACKET);
-		}
-		break;
-
-#if (MUSB_DEBUG > 0)
-		/* set/read debug level */
-	case 'D':{
-			if (count > 1) {
-				char digits[8], *p = digits;
-				int i = 0, level = 0, sign = 1;
-				int len = min(count - 1, (unsigned long)8);
-
-				if (copy_from_user(&digits, &buffer[1], len))
-					return -EFAULT;
-
-				/* optional sign */
-				if (*p == '-') {
-					len -= 1;
-					sign = -sign;
-					p++;
-				}
-
-				/* read it */
-				while (i++ < len && *p > '0' && *p < '9') {
-					level = level * 10 + (*p - '0');
-					p++;
-				}
-
-				level *= sign;
-				DBG(1, "debug level %d\n", level);
-				debug = level;
-			}
-		}
-		break;
-
-
-	case '?':
-		INFO("?: you are seeing it\n");
-		INFO("C/c: soft connect enable/disable\n");
-		INFO("I/i: hispeed enable/disable\n");
-		INFO("F: force session start\n");
-		INFO("H: host mode\n");
-		INFO("T: start sending TEST_PACKET\n");
-		INFO("D: set/read dbug level\n");
-		break;
-#endif
-
-	default:
-		ERR("Command %c not implemented\n", cmd);
-		break;
-	}
-
-	musb_platform_try_idle(musb, 0);
-
-	return count;
-}
-
-static int musb_proc_read(char *page, char **start,
-			off_t off, int count, int *eof, void *data)
-{
-	char *buffer = page;
-	int code = 0;
-	unsigned long	flags;
-	struct musb	*musb = data;
-	unsigned	epnum;
-
-	count -= off;
-	count -= 1;		/* for NUL at end */
-	if (count <= 0)
-		return -EINVAL;
-
-	spin_lock_irqsave(&musb->lock, flags);
-
-	code = dump_header_stats(musb, buffer);
-	if (code > 0) {
-		buffer += code;
-		count -= code;
-	}
-
-	/* generate the report for the end points */
-	/* REVISIT ... not unless something's connected! */
-	for (epnum = 0; count >= 0 && epnum < musb->nr_endpoints;
-			epnum++) {
-		code = dump_end_info(musb, epnum, buffer, count);
-		if (code > 0) {
-			buffer += code;
-			count -= code;
-		}
-	}
-
-	musb_platform_try_idle(musb, 0);
-
-	spin_unlock_irqrestore(&musb->lock, flags);
-	*eof = 1;
-
-	return buffer - page;
-}
-
-void __devexit musb_debug_delete(char *name, struct musb *musb)
-{
-	if (musb->proc_entry)
-		remove_proc_entry(name, NULL);
-}
-
-struct proc_dir_entry *__init
-musb_debug_create(char *name, struct musb *data)
-{
-	struct proc_dir_entry	*pde;
-
-	/* FIXME convert everything to seq_file; then later, debugfs */
-
-	if (!name)
-		return NULL;
-
-	pde = create_proc_entry(name, S_IFREG | S_IRUGO | S_IWUSR, NULL);
-	data->proc_entry = pde;
-	if (pde) {
-		pde->data = data;
-		/* pde->owner = THIS_MODULE; */
-
-		pde->read_proc = musb_proc_read;
-		pde->write_proc = musb_proc_write;
-
-		pde->size = 0;
-
-		pr_debug("Registered /proc/%s\n", name);
-	} else {
-		pr_debug("Cannot create a valid proc file entry");
-	}
-
-	return pde;
-}
-- 
GitLab


From e8164f64caff68d4e878e1719d88d145faa75f1d Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@nokia.com>
Date: Sun, 10 Aug 2008 21:22:35 +0300
Subject: [PATCH 280/869] usb: musb: get rid of MUSB_LOGLEVEL and use parameter

We can change debugging level on the fly via
/sys/module/musb_hdrc/parameters/debug.

We can also get rid of the LOGLEVEL facility in Kconfig
and rely only in module parameter.

Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/Kconfig      | 13 ++++++-------
 drivers/usb/musb/Makefile     | 16 ++--------------
 drivers/usb/musb/musb_core.c  | 17 ++++-------------
 drivers/usb/musb/musb_debug.h |  4 ----
 4 files changed, 12 insertions(+), 38 deletions(-)

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index faca4333f27..a0017486ad4 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -165,12 +165,11 @@ config USB_TUSB_OMAP_DMA
 	help
 	  Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
 
-config	USB_MUSB_LOGLEVEL
+config	USB_MUSB_DEBUG
 	depends on USB_MUSB_HDRC
-	int  'Logging Level (0 - none / 3 - annoying / ... )'
-	default 0
+	bool "Enable debugging messages"
+	default n
 	help
-	  Set the logging level. 0 disables the debugging altogether,
-	  although when USB_DEBUG is set the value is at least 1.
-	  Starting at level 3, per-transfer (urb, usb_request, packet,
-	  or dma transfer) tracing may kick in.
+	  This enables musb debugging. To set the logging level use the debug
+	  module parameter. Starting at level 3, per-transfer (urb, usb_request,
+	  packet, or dma transfer) tracing may kick in.
diff --git a/drivers/usb/musb/Makefile b/drivers/usb/musb/Makefile
index 860369c7cbe..b6af0d687a7 100644
--- a/drivers/usb/musb/Makefile
+++ b/drivers/usb/musb/Makefile
@@ -64,18 +64,6 @@ endif
 
 # Debugging
 
-MUSB_DEBUG:=$(CONFIG_USB_MUSB_LOGLEVEL)
-
-ifeq ("$(strip $(MUSB_DEBUG))","")
-    ifdef CONFIG_USB_DEBUG
-	MUSB_DEBUG:=1
-    else
-	MUSB_DEBUG:=0
-    endif
+ifeq ($(CONFIG_USB_MUSB_DEBUG),y)
+	EXTRA_CFLAGS += -DDEBUG
 endif
-
-ifneq ($(MUSB_DEBUG),0)
-    EXTRA_CFLAGS += -DDEBUG
-endif
-
-EXTRA_CFLAGS += -DMUSB_DEBUG=$(MUSB_DEBUG)
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 99690ba436d..c5b8f0296fc 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -114,23 +114,14 @@
 
 
 
-#if MUSB_DEBUG > 0
-unsigned debug = MUSB_DEBUG;
-module_param(debug, uint, 0);
-MODULE_PARM_DESC(debug, "initial debug message level");
-
-#define MUSB_VERSION_SUFFIX	"/dbg"
-#endif
+unsigned debug;
+module_param(debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug message level. Default = 0");
 
 #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia"
 #define DRIVER_DESC "Inventra Dual-Role USB Controller Driver"
 
-#define MUSB_VERSION_BASE "6.0"
-
-#ifndef MUSB_VERSION_SUFFIX
-#define MUSB_VERSION_SUFFIX	""
-#endif
-#define MUSB_VERSION	MUSB_VERSION_BASE MUSB_VERSION_SUFFIX
+#define MUSB_VERSION "6.0"
 
 #define DRIVER_INFO DRIVER_DESC ", v" MUSB_VERSION
 
diff --git a/drivers/usb/musb/musb_debug.h b/drivers/usb/musb/musb_debug.h
index 3bdb311e820..4d2794441b1 100644
--- a/drivers/usb/musb/musb_debug.h
+++ b/drivers/usb/musb/musb_debug.h
@@ -48,11 +48,7 @@
 				__func__, __LINE__ , ## args); \
 	} } while (0)
 
-#if MUSB_DEBUG > 0
 extern unsigned debug;
-#else
-#define debug	0
-#endif
 
 static inline int _dbg_level(unsigned l)
 {
-- 
GitLab


From fb85d991616046f1b640ed9c4eab9b44908dab74 Mon Sep 17 00:00:00 2001
From: Anand Gadiyar <gadiyar@ti.com>
Date: Thu, 21 Aug 2008 20:21:00 +0530
Subject: [PATCH 281/869] MUSB: Fix index register corruption seen with g_ether
 and Windows host

If Indexed Mode register accesses are enabled, the ep0_rxstate()
function calls musb_g_ep0_giveback() before writing to the CSR
register. When control returns to this ep0_rxstate, the index
register contents are over-written. This causes the CSR register
write to fail.

Fixed by writing the correct value into the index register before
writing to the CSR.

This was observed only in ep0_rxstate() with g_ether loaded and
the device connected to a MS Windows host PC. Anticipatively fixed
ep0_txstate() as well.

Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/musb/musb_gadget_ep0.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 48d7d3ccb24..a57652fff39 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -476,6 +476,7 @@ static void ep0_rxstate(struct musb *musb)
 			return;
 		musb->ackpend = 0;
 	}
+	musb_ep_select(musb->mregs, 0);
 	musb_writew(regs, MUSB_CSR0, tmp);
 }
 
@@ -528,6 +529,7 @@ static void ep0_txstate(struct musb *musb)
 	}
 
 	/* send it out, triggering a "txpktrdy cleared" irq */
+	musb_ep_select(musb->mregs, 0);
 	musb_writew(regs, MUSB_CSR0, csr);
 }
 
-- 
GitLab


From 74573ee7096a4ffc2f098108d21c85801b9c7434 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Wed, 20 Aug 2008 16:56:04 -0700
Subject: [PATCH 282/869] USB: cdc-acm: don't unlock acm->mutex on error path

On Wed, Jul 23, 2008 at 03:52:36PM +0300, Andrei Popa wrote:
> I installed gnokii-0.6.22-r2 and gave the command "gnokii --identify"
> and the kernel oopsed:
>
> BUG: unable to handle kernel NULL pointer dereference at 00000458
> IP: [<c0444b52>] mutex_unlock+0x0/0xb
>  [<c03830ae>] acm_tty_open+0x4c/0x214

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Tested-by: Andrei Popa <andrei.popa@i-neo.ro>
Cc: stable <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/class/cdc-acm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 382522eb1f7..c257453fa9d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -589,8 +589,8 @@ static int acm_tty_open(struct tty_struct *tty, struct file *filp)
 	tasklet_schedule(&acm->urb_task);
 
 done:
-err_out:
 	mutex_unlock(&acm->mutex);
+err_out:
 	mutex_unlock(&open_mutex);
 	return rv;
 
-- 
GitLab


From 65605ae8e587d714f73e674369bc4cd5a1e53a9b Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 12 Aug 2008 14:33:27 -0400
Subject: [PATCH 283/869] USB: Add udev argument to interface suspend/resume
 functions

This patch (as1127) makes a minor change to the prototypes of the
usb_suspend_interface() and usb_resume_interface() routines.  Now the
usb_device structure is passed as an argument, instead of being
computed on-the-fly from the usb_interface argument.

It makes the code look simpler, even if it really isn't much different
from before.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/driver.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 2be37fe466f..ed1cc8530a9 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -926,14 +926,14 @@ static int usb_resume_device(struct usb_device *udev)
 }
 
 /* Caller has locked intf's usb_device's pm mutex */
-static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
+static int usb_suspend_interface(struct usb_device *udev,
+		struct usb_interface *intf, pm_message_t msg)
 {
 	struct usb_driver	*driver;
 	int			status = 0;
 
 	/* with no hardware, USB interfaces only use FREEZE and ON states */
-	if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
-			!is_active(intf))
+	if (udev->state == USB_STATE_NOTATTACHED || !is_active(intf))
 		goto done;
 
 	if (intf->condition == USB_INTERFACE_UNBOUND)	/* This can't happen */
@@ -944,7 +944,7 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
 		status = driver->suspend(intf, msg);
 		if (status == 0)
 			mark_quiesced(intf);
-		else if (!interface_to_usbdev(intf)->auto_pm)
+		else if (!udev->auto_pm)
 			dev_err(&intf->dev, "%s error %d\n",
 					"suspend", status);
 	} else {
@@ -961,13 +961,13 @@ static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
 }
 
 /* Caller has locked intf's usb_device's pm_mutex */
-static int usb_resume_interface(struct usb_interface *intf, int reset_resume)
+static int usb_resume_interface(struct usb_device *udev,
+		struct usb_interface *intf, int reset_resume)
 {
 	struct usb_driver	*driver;
 	int			status = 0;
 
-	if (interface_to_usbdev(intf)->state == USB_STATE_NOTATTACHED ||
-			is_active(intf))
+	if (udev->state == USB_STATE_NOTATTACHED || is_active(intf))
 		goto done;
 
 	/* Don't let autoresume interfere with unbinding */
@@ -1151,7 +1151,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	if (udev->actconfig) {
 		for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
 			intf = udev->actconfig->interface[i];
-			status = usb_suspend_interface(intf, msg);
+			status = usb_suspend_interface(udev, intf, msg);
 			if (status != 0)
 				break;
 		}
@@ -1163,7 +1163,7 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 	if (status != 0) {
 		while (--i >= 0) {
 			intf = udev->actconfig->interface[i];
-			usb_resume_interface(intf, 0);
+			usb_resume_interface(udev, intf, 0);
 		}
 
 		/* Try another autosuspend when the interfaces aren't busy */
@@ -1276,7 +1276,7 @@ static int usb_resume_both(struct usb_device *udev)
 	if (status == 0 && udev->actconfig) {
 		for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
 			intf = udev->actconfig->interface[i];
-			usb_resume_interface(intf, udev->reset_resume);
+			usb_resume_interface(udev, intf, udev->reset_resume);
 		}
 	}
 
-- 
GitLab


From 55151d7daba185f94e9dc561a5a2ba36b5f647dd Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 12 Aug 2008 14:33:59 -0400
Subject: [PATCH 284/869] USB: Defer Set-Interface for suspended devices

This patch (as1128) fixes one of the problems related to the new PM
infrastructure.  We are not allowed to register new child devices
during the middle of a system sleep transition, but unbinding a USB
driver causes the core to automatically install altsetting 0 and
thereby create new endpoint pseudo-devices.

The patch fixes this problem (and the related problem that installing
altsetting 0 will fail if the device is suspended) by deferring the
Set-Interface call until some later time when it is legal and can
succeed.  Possible later times are: when a new driver is being probed
for the interface, and when the interface is being resumed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/driver.c | 31 ++++++++++++++++++++++++++++---
 include/linux/usb.h       |  3 +++
 2 files changed, 31 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index ed1cc8530a9..637b2bea556 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -230,6 +230,13 @@ static int usb_probe_interface(struct device *dev)
 		 */
 		intf->pm_usage_cnt = !(driver->supports_autosuspend);
 
+		/* Carry out a deferred switch to altsetting 0 */
+		if (intf->needs_altsetting0) {
+			usb_set_interface(udev, intf->altsetting[0].
+					desc.bInterfaceNumber, 0);
+			intf->needs_altsetting0 = 0;
+		}
+
 		error = driver->probe(intf, id);
 		if (error) {
 			mark_quiesced(intf);
@@ -266,8 +273,17 @@ static int usb_unbind_interface(struct device *dev)
 
 	driver->disconnect(intf);
 
-	/* reset other interface state */
-	usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0);
+	/* Reset other interface state.
+	 * We cannot do a Set-Interface if the device is suspended or
+	 * if it is prepared for a system sleep (since installing a new
+	 * altsetting means creating new endpoint device entries).
+	 * When either of these happens, defer the Set-Interface.
+	 */
+	if (!error && intf->dev.power.status == DPM_ON)
+		usb_set_interface(udev, intf->altsetting[0].
+				desc.bInterfaceNumber, 0);
+	else
+		intf->needs_altsetting0 = 1;
 	usb_set_intfdata(intf, NULL);
 
 	intf->condition = USB_INTERFACE_UNBOUND;
@@ -975,8 +991,17 @@ static int usb_resume_interface(struct usb_device *udev,
 		goto done;
 
 	/* Can't resume it if it doesn't have a driver. */
-	if (intf->condition == USB_INTERFACE_UNBOUND)
+	if (intf->condition == USB_INTERFACE_UNBOUND) {
+
+		/* Carry out a deferred switch to altsetting 0 */
+		if (intf->needs_altsetting0 &&
+				intf->dev.power.status == DPM_ON) {
+			usb_set_interface(udev, intf->altsetting[0].
+					desc.bInterfaceNumber, 0);
+			intf->needs_altsetting0 = 0;
+		}
 		goto done;
+	}
 
 	/* Don't resume if the interface is marked for rebinding */
 	if (intf->needs_binding)
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 0924cd9c30f..94ac74aba6b 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -110,6 +110,8 @@ enum usb_interface_condition {
  * @sysfs_files_created: sysfs attributes exist
  * @needs_remote_wakeup: flag set when the driver requires remote-wakeup
  *	capability during autosuspend.
+ * @needs_altsetting0: flag set when a set-interface request for altsetting 0
+ *	has been deferred.
  * @needs_binding: flag set when the driver should be re-probed or unbound
  *	following a reset or suspend operation it doesn't support.
  * @dev: driver model's view of this device
@@ -162,6 +164,7 @@ struct usb_interface {
 	unsigned is_active:1;		/* the interface is not suspended */
 	unsigned sysfs_files_created:1;	/* the sysfs attributes exist */
 	unsigned needs_remote_wakeup:1;	/* driver requires remote wakeup */
+	unsigned needs_altsetting0:1;	/* switch to altsetting 0 is pending */
 	unsigned needs_binding:1;	/* needs delayed unbind/rebind */
 
 	struct device dev;		/* interface specific device info */
-- 
GitLab


From f2189c477c986db47ac7f9cc32d05f6df18bfe9e Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 12 Aug 2008 14:34:10 -0400
Subject: [PATCH 285/869] USB: Add new PM callback methods for USB

This patch (as1129) adds support for the new PM callbacks to usbcore.
The new callbacks merely invoke the same old USB power management
routines as the old ones did.

A minor improvement is that the callbacks are present only in the
"USB-device" device_type structure, rather than in the bus_type
structure.  This way they will be invoked only for USB devices, not
for USB interfaces.  The core USB PM routines automatically handle
suspending and resuming interfaces along with their devices.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/driver.c | 15 ++------
 drivers/usb/core/usb.c    | 73 +++++++++++++++++++++++++++++++++++----
 drivers/usb/core/usb.h    |  3 ++
 3 files changed, 72 insertions(+), 19 deletions(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 637b2bea556..2da70b4d33f 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1630,12 +1630,10 @@ int usb_external_resume_device(struct usb_device *udev)
 	return status;
 }
 
-static int usb_suspend(struct device *dev, pm_message_t message)
+int usb_suspend(struct device *dev, pm_message_t message)
 {
 	struct usb_device	*udev;
 
-	if (!is_usb_device(dev))	/* Ignore PM for interfaces */
-		return 0;
 	udev = to_usb_device(dev);
 
 	/* If udev is already suspended, we can skip this suspend and
@@ -1654,12 +1652,10 @@ static int usb_suspend(struct device *dev, pm_message_t message)
 	return usb_external_suspend_device(udev, message);
 }
 
-static int usb_resume(struct device *dev)
+int usb_resume(struct device *dev)
 {
 	struct usb_device	*udev;
 
-	if (!is_usb_device(dev))	/* Ignore PM for interfaces */
-		return 0;
 	udev = to_usb_device(dev);
 
 	/* If udev->skip_sys_resume is set then udev was already suspended
@@ -1671,17 +1667,10 @@ static int usb_resume(struct device *dev)
 	return usb_external_resume_device(udev);
 }
 
-#else
-
-#define usb_suspend	NULL
-#define usb_resume	NULL
-
 #endif /* CONFIG_PM */
 
 struct bus_type usb_bus_type = {
 	.name =		"usb",
 	.match =	usb_device_match,
 	.uevent =	usb_uevent,
-	.suspend =	usb_suspend,
-	.resume =	usb_resume,
 };
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 84fcaa6a21e..be1fa0723f2 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -219,12 +219,6 @@ static int usb_dev_uevent(struct device *dev, struct kobj_uevent_env *env)
 }
 #endif	/* CONFIG_HOTPLUG */
 
-struct device_type usb_device_type = {
-	.name =		"usb_device",
-	.release =	usb_release_dev,
-	.uevent =	usb_dev_uevent,
-};
-
 #ifdef	CONFIG_PM
 
 static int ksuspend_usb_init(void)
@@ -244,13 +238,80 @@ static void ksuspend_usb_cleanup(void)
 	destroy_workqueue(ksuspend_usb_wq);
 }
 
+/* USB device Power-Management thunks.
+ * There's no need to distinguish here between quiescing a USB device
+ * and powering it down; the generic_suspend() routine takes care of
+ * it by skipping the usb_port_suspend() call for a quiesce.  And for
+ * USB interfaces there's no difference at all.
+ */
+
+static int usb_dev_prepare(struct device *dev)
+{
+	return 0;		/* Implement eventually? */
+}
+
+static void usb_dev_complete(struct device *dev)
+{
+	/* Currently used only for rebinding interfaces */
+	usb_resume(dev);	/* Implement eventually? */
+}
+
+static int usb_dev_suspend(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_SUSPEND);
+}
+
+static int usb_dev_resume(struct device *dev)
+{
+	return usb_resume(dev);
+}
+
+static int usb_dev_freeze(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_FREEZE);
+}
+
+static int usb_dev_thaw(struct device *dev)
+{
+	return usb_resume(dev);
+}
+
+static int usb_dev_poweroff(struct device *dev)
+{
+	return usb_suspend(dev, PMSG_HIBERNATE);
+}
+
+static int usb_dev_restore(struct device *dev)
+{
+	return usb_resume(dev);
+}
+
+static struct pm_ops usb_device_pm_ops = {
+	.prepare =	usb_dev_prepare,
+	.complete =	usb_dev_complete,
+	.suspend =	usb_dev_suspend,
+	.resume =	usb_dev_resume,
+	.freeze =	usb_dev_freeze,
+	.thaw =		usb_dev_thaw,
+	.poweroff =	usb_dev_poweroff,
+	.restore =	usb_dev_restore,
+};
+
 #else
 
 #define ksuspend_usb_init()	0
 #define ksuspend_usb_cleanup()	do {} while (0)
+#define usb_device_pm_ops	(*(struct pm_ops *)0)
 
 #endif	/* CONFIG_PM */
 
+struct device_type usb_device_type = {
+	.name =		"usb_device",
+	.release =	usb_release_dev,
+	.uevent =	usb_dev_uevent,
+	.pm =		&usb_device_pm_ops,
+};
+
 
 /* Returns 1 if @usb_bus is WUSB, 0 otherwise */
 static unsigned usb_bus_is_wusb(struct usb_bus *bus)
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index d9a6e16dbf8..9a1a45ac3ad 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -41,6 +41,9 @@ extern void usb_host_cleanup(void);
 
 #ifdef	CONFIG_PM
 
+extern int usb_suspend(struct device *dev, pm_message_t msg);
+extern int usb_resume(struct device *dev);
+
 extern void usb_autosuspend_work(struct work_struct *work);
 extern int usb_port_suspend(struct usb_device *dev);
 extern int usb_port_resume(struct usb_device *dev);
-- 
GitLab


From 5096aedcd2eb70fbea83f09281f97f9ec973d9de Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Tue, 12 Aug 2008 14:34:14 -0400
Subject: [PATCH 286/869] USB: Don't rebind before "complete" callback

This patch (as1130) fixes an incompatibility between the new PM
infrastructure and USB power management.  We are not allowed to call
drivers' probe routines during a system sleep transition between the
"prepare" and "complete" callbacks, but that's exactly what we do when
a driver doesn't have full suspend/resume support.  Such drivers are
unbound during the "suspend" call and reprobed during the "resume" call.

The patch causes the reprobe step to be skipped if the "complete"
callback hasn't been issued yet, i.e., if the interface's
dev.power.status field is not equal to DPM_ON.  Thus during the
"resume" callback nothing bad will happen, and during the final
"complete" callback the reprobing will occur as desired.

This fixes the problem reported in Bugzilla #11263.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/driver.c | 30 +++++++++---------------------
 1 file changed, 9 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 2da70b4d33f..5a7fa6f0995 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -814,7 +814,8 @@ void usb_forced_unbind_intf(struct usb_interface *intf)
  * The caller must hold @intf's device's lock, but not its pm_mutex
  * and not @intf->dev.sem.
  *
- * FIXME: The caller must block system sleep transitions.
+ * Note: Rebinds will be skipped if a system sleep transition is in
+ * progress and the PM "complete" callback hasn't occurred yet.
  */
 void usb_rebind_intf(struct usb_interface *intf)
 {
@@ -830,10 +831,12 @@ void usb_rebind_intf(struct usb_interface *intf)
 	}
 
 	/* Try to rebind the interface */
-	intf->needs_binding = 0;
-	rc = device_attach(&intf->dev);
-	if (rc < 0)
-		dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+	if (intf->dev.power.status == DPM_ON) {
+		intf->needs_binding = 0;
+		rc = device_attach(&intf->dev);
+		if (rc < 0)
+			dev_warn(&intf->dev, "rebind failed: %d\n", rc);
+	}
 }
 
 #ifdef CONFIG_PM
@@ -845,7 +848,6 @@ void usb_rebind_intf(struct usb_interface *intf)
  * or rebind interfaces that have been unbound, according to @action.
  *
  * The caller must hold @udev's device lock.
- * FIXME: For rebinds, the caller must block system sleep transitions.
  */
 static void do_unbind_rebind(struct usb_device *udev, int action)
 {
@@ -867,22 +869,8 @@ static void do_unbind_rebind(struct usb_device *udev, int action)
 				}
 				break;
 			case DO_REBIND:
-				if (intf->needs_binding) {
-
-	/* FIXME: The next line is needed because we are going to probe
-	 * the interface, but as far as the PM core is concerned the
-	 * interface is still suspended.  The problem wouldn't exist
-	 * if we could rebind the interface during the interface's own
-	 * resume() call, but at the time the usb_device isn't locked!
-	 *
-	 * The real solution will be to carry this out during the device's
-	 * complete() callback.  Until that is implemented, we have to
-	 * use this hack.
-	 */
-//					intf->dev.power.sleeping = 0;
-
+				if (intf->needs_binding)
 					usb_rebind_intf(intf);
-				}
 				break;
 			}
 		}
-- 
GitLab


From b5fb454f69642f9d933b327b185a2ba06dd0945c Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 20 Aug 2008 17:22:05 -0400
Subject: [PATCH 287/869] USB: automatically enable RHSC interrupts

This patch (as1069c) changes the way OHCI root-hub status-change
interrupts are enabled.  Currently a special HCD method,
hub_irq_enable(), is called when the hub driver is finished using a
root hub.  This approach turns out to be subject to races, resulting
in unnecessary polling.

The patch does away with the method entirely.  Instead, the driver
automatically enables the RHSC interrupt when no more status changes
are present.  This scheme is safe with controllers using
level-triggered semantics for their interrupt flags.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/core/hcd.c          |  9 ------
 drivers/usb/core/hcd.h          |  4 ---
 drivers/usb/core/hub.c          |  9 ------
 drivers/usb/host/ohci-at91.c    |  1 -
 drivers/usb/host/ohci-au1xxx.c  |  1 -
 drivers/usb/host/ohci-ep93xx.c  |  1 -
 drivers/usb/host/ohci-hub.c     | 53 +++++++++++++++++++--------------
 drivers/usb/host/ohci-lh7a404.c |  1 -
 drivers/usb/host/ohci-omap.c    |  1 -
 drivers/usb/host/ohci-pci.c     |  1 -
 drivers/usb/host/ohci-pnx4008.c |  1 -
 drivers/usb/host/ohci-pnx8550.c |  1 -
 drivers/usb/host/ohci-ppc-of.c  |  1 -
 drivers/usb/host/ohci-ppc-soc.c |  1 -
 drivers/usb/host/ohci-ps3.c     |  1 -
 drivers/usb/host/ohci-pxa27x.c  |  1 -
 drivers/usb/host/ohci-s3c2410.c |  1 -
 drivers/usb/host/ohci-sa1111.c  |  1 -
 drivers/usb/host/ohci-sh.c      |  1 -
 drivers/usb/host/ohci-sm501.c   |  1 -
 drivers/usb/host/ohci-ssb.c     |  1 -
 drivers/usb/host/u132-hcd.c     | 11 -------
 22 files changed, 31 insertions(+), 72 deletions(-)

diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index f7bfd72ef11..8abd4e59bf4 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -924,15 +924,6 @@ static int register_root_hub(struct usb_hcd *hcd)
 	return retval;
 }
 
-void usb_enable_root_hub_irq (struct usb_bus *bus)
-{
-	struct usb_hcd *hcd;
-
-	hcd = container_of (bus, struct usb_hcd, self);
-	if (hcd->driver->hub_irq_enable && hcd->state != HC_STATE_HALT)
-		hcd->driver->hub_irq_enable (hcd);
-}
-
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 5b0b59b0d89..e710ce04e22 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -212,8 +212,6 @@ struct hc_driver {
 	int	(*bus_suspend)(struct usb_hcd *);
 	int	(*bus_resume)(struct usb_hcd *);
 	int	(*start_port_reset)(struct usb_hcd *, unsigned port_num);
-	void	(*hub_irq_enable)(struct usb_hcd *);
-		/* Needed only if port-change IRQs are level-triggered */
 
 		/* force handover of high-speed port to full-speed companion */
 	void	(*relinquish_port)(struct usb_hcd *, int);
@@ -379,8 +377,6 @@ extern struct list_head usb_bus_list;
 extern struct mutex usb_bus_list_lock;
 extern wait_queue_head_t usb_kill_urb_queue;
 
-extern void usb_enable_root_hub_irq(struct usb_bus *bus);
-
 extern int usb_find_interface_driver(struct usb_device *dev,
 	struct usb_interface *interface);
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 107e1d25dde..6a5cb018383 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2102,8 +2102,6 @@ int usb_port_resume(struct usb_device *udev)
 	}
 
 	clear_bit(port1, hub->busy_bits);
-	if (!hub->hdev->parent && !hub->busy_bits[0])
-		usb_enable_root_hub_irq(hub->hdev->bus);
 
 	status = check_port_resume_type(udev,
 			hub, port1, status, portchange, portstatus);
@@ -3081,11 +3079,6 @@ static void hub_events(void)
 			}
 		}
 
-		/* If this is a root hub, tell the HCD it's okay to
-		 * re-enable port-change interrupts now. */
-		if (!hdev->parent && !hub->busy_bits[0])
-			usb_enable_root_hub_irq(hdev->bus);
-
 loop_autopm:
 		/* Allow autosuspend if we're not going to run again */
 		if (list_empty(&hub->event_list))
@@ -3311,8 +3304,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
 			break;
 	}
 	clear_bit(port1, parent_hub->busy_bits);
-	if (!parent_hdev->parent && !parent_hub->busy_bits[0])
-		usb_enable_root_hub_irq(parent_hdev->bus);
 
 	if (ret < 0)
 		goto re_enumerate;
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 6db7a2889e6..4ed228a8994 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -260,7 +260,6 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
index c0948008fe3..2ac4e022a13 100644
--- a/drivers/usb/host/ohci-au1xxx.c
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -163,7 +163,6 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index cb0b506f825..fb3055f084b 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -134,7 +134,6 @@ static struct hc_driver ohci_ep93xx_hc_driver = {
 	.get_frame_number	= ohci_get_frame,
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
-	.hub_irq_enable		= ohci_rhsc_enable,
 #ifdef CONFIG_PM
 	.bus_suspend		= ohci_bus_suspend,
 	.bus_resume		= ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 439beb784f3..7ea9a7b3115 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -36,18 +36,6 @@
 
 /*-------------------------------------------------------------------------*/
 
-/* hcd->hub_irq_enable() */
-static void ohci_rhsc_enable (struct usb_hcd *hcd)
-{
-	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
-
-	spin_lock_irq(&ohci->lock);
-	if (!ohci->autostop)
-		del_timer(&hcd->rh_timer);	/* Prevent next poll */
-	ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
-	spin_unlock_irq(&ohci->lock);
-}
-
 #define OHCI_SCHED_ENABLES \
 	(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
 
@@ -374,18 +362,28 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 		int any_connected)
 {
 	int	poll_rh = 1;
+	int	rhsc;
 
+	rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
 	switch (ohci->hc_control & OHCI_CTRL_HCFS) {
 
 	case OHCI_USB_OPER:
-		/* keep on polling until we know a device is connected
-		 * and RHSC is enabled */
+		/* If no status changes are pending, enable status-change
+		 * interrupts.
+		 */
+		if (!rhsc && !changed) {
+			rhsc = OHCI_INTR_RHSC;
+			ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
+		}
+
+		/* Keep on polling until we know a device is connected
+		 * and RHSC is enabled, or until we autostop.
+		 */
 		if (!ohci->autostop) {
 			if (any_connected ||
 					!device_may_wakeup(&ohci_to_hcd(ohci)
 						->self.root_hub->dev)) {
-				if (ohci_readl(ohci, &ohci->regs->intrenable) &
-						OHCI_INTR_RHSC)
+				if (rhsc)
 					poll_rh = 0;
 			} else {
 				ohci->autostop = 1;
@@ -398,12 +396,13 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 				ohci->autostop = 0;
 				ohci->next_statechange = jiffies +
 						STATECHANGE_DELAY;
-			} else if (time_after_eq(jiffies,
+			} else if (rhsc && time_after_eq(jiffies,
 						ohci->next_statechange)
 					&& !ohci->ed_rm_list
 					&& !(ohci->hc_control &
 						OHCI_SCHED_ENABLES)) {
 				ohci_rh_suspend(ohci, 1);
+				poll_rh = 0;
 			}
 		}
 		break;
@@ -417,6 +416,12 @@ static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 			else
 				usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
 		} else {
+			if (!rhsc && (ohci->autostop ||
+					ohci_to_hcd(ohci)->self.root_hub->
+						do_remote_wakeup))
+				ohci_writel(ohci, OHCI_INTR_RHSC,
+						&ohci->regs->intrenable);
+
 			/* everything is idle, no need for polling */
 			poll_rh = 0;
 		}
@@ -438,12 +443,16 @@ static inline int ohci_rh_resume(struct ohci_hcd *ohci)
 static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
 		int any_connected)
 {
-	int	poll_rh = 1;
-
-	/* keep on polling until RHSC is enabled */
+	/* If RHSC is enabled, don't poll */
 	if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
-		poll_rh = 0;
-	return poll_rh;
+		return 0;
+
+	/* If no status changes are pending, enable status-change interrupts */
+	if (!changed) {
+		ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+		return 0;
+	}
+	return 1;
 }
 
 #endif	/* CONFIG_PM */
diff --git a/drivers/usb/host/ohci-lh7a404.c b/drivers/usb/host/ohci-lh7a404.c
index 9e31d440d11..de42283149c 100644
--- a/drivers/usb/host/ohci-lh7a404.c
+++ b/drivers/usb/host/ohci-lh7a404.c
@@ -193,7 +193,6 @@ static const struct hc_driver ohci_lh7a404_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 3d532b70967..1eb64d08b60 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -470,7 +470,6 @@ static const struct hc_driver ohci_omap_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c
index 083e8df0a81..a9c2ae36c7a 100644
--- a/drivers/usb/host/ohci-pci.c
+++ b/drivers/usb/host/ohci-pci.c
@@ -459,7 +459,6 @@ static const struct hc_driver ohci_pci_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index b02cd076197..658a2a978c3 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -277,7 +277,6 @@ static const struct hc_driver ohci_pnx4008_hc_driver = {
 	 */
 	.hub_status_data = ohci_hub_status_data,
 	.hub_control = ohci_hub_control,
-	.hub_irq_enable = ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend = ohci_bus_suspend,
 	.bus_resume = ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-pnx8550.c b/drivers/usb/host/ohci-pnx8550.c
index 605d59cba28..28467e288a9 100644
--- a/drivers/usb/host/ohci-pnx8550.c
+++ b/drivers/usb/host/ohci-pnx8550.c
@@ -201,7 +201,6 @@ static const struct hc_driver ohci_pnx8550_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c
index 91e6e101a4c..7ac53264ead 100644
--- a/drivers/usb/host/ohci-ppc-of.c
+++ b/drivers/usb/host/ohci-ppc-of.c
@@ -72,7 +72,6 @@ static const struct hc_driver ohci_ppc_of_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ppc-soc.c b/drivers/usb/host/ohci-ppc-soc.c
index 523c3012557..cd3398b675b 100644
--- a/drivers/usb/host/ohci-ppc-soc.c
+++ b/drivers/usb/host/ohci-ppc-soc.c
@@ -172,7 +172,6 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ps3.c b/drivers/usb/host/ohci-ps3.c
index 55c95647f00..2089d8a46c4 100644
--- a/drivers/usb/host/ohci-ps3.c
+++ b/drivers/usb/host/ohci-ps3.c
@@ -68,7 +68,6 @@ static const struct hc_driver ps3_ohci_hc_driver = {
 	.get_frame_number	= ohci_get_frame,
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
-	.hub_irq_enable		= ohci_rhsc_enable,
 	.start_port_reset	= ohci_start_port_reset,
 #if defined(CONFIG_PM)
 	.bus_suspend 		= ohci_bus_suspend,
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index 8c9c4849db6..7f0f35c7818 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -298,7 +298,6 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef  CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index 9e3dc4069e8..f46af7a718d 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -466,7 +466,6 @@ static const struct hc_driver ohci_s3c2410_hc_driver = {
 	 */
 	.hub_status_data =	ohci_s3c2410_hub_status_data,
 	.hub_control =		ohci_s3c2410_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 4626b002e67..e4bbe8e188e 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -231,7 +231,6 @@ static const struct hc_driver ohci_sa1111_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sh.c b/drivers/usb/host/ohci-sh.c
index e7ee607278f..60f03cc7ec4 100644
--- a/drivers/usb/host/ohci-sh.c
+++ b/drivers/usb/host/ohci-sh.c
@@ -68,7 +68,6 @@ static const struct hc_driver ohci_sh_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 21b164e4abe..cff23637cfc 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -75,7 +75,6 @@ static const struct hc_driver ohci_sm501_hc_driver = {
 	 */
 	.hub_status_data =	ohci_hub_status_data,
 	.hub_control =		ohci_hub_control,
-	.hub_irq_enable =	ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
diff --git a/drivers/usb/host/ohci-ssb.c b/drivers/usb/host/ohci-ssb.c
index 3660c83d80a..23fd6a886bd 100644
--- a/drivers/usb/host/ohci-ssb.c
+++ b/drivers/usb/host/ohci-ssb.c
@@ -81,7 +81,6 @@ static const struct hc_driver ssb_ohci_hc_driver = {
 
 	.hub_status_data	= ohci_hub_status_data,
 	.hub_control		= ohci_hub_control,
-	.hub_irq_enable		= ohci_rhsc_enable,
 #ifdef	CONFIG_PM
 	.bus_suspend		= ohci_bus_suspend,
 	.bus_resume		= ohci_bus_resume,
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 20ad3c48fcb..228f2b070f2 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2934,16 +2934,6 @@ static int u132_start_port_reset(struct usb_hcd *hcd, unsigned port_num)
 		return 0;
 }
 
-static void u132_hub_irq_enable(struct usb_hcd *hcd)
-{
-	struct u132 *u132 = hcd_to_u132(hcd);
-	if (u132->going > 1) {
-		dev_err(&u132->platform_dev->dev, "device has been removed %d\n"
-			, u132->going);
-	} else if (u132->going > 0)
-		dev_err(&u132->platform_dev->dev, "device is being removed\n");
-}
-
 
 #ifdef CONFIG_PM
 static int u132_bus_suspend(struct usb_hcd *hcd)
@@ -2995,7 +2985,6 @@ static struct hc_driver u132_hc_driver = {
 	.bus_suspend = u132_bus_suspend,
 	.bus_resume = u132_bus_resume,
 	.start_port_reset = u132_start_port_reset,
-	.hub_irq_enable = u132_hub_irq_enable,
 };
 
 /*
-- 
GitLab


From eaea04353e0114a9805fc2cf1ff832cb0ac2570b Mon Sep 17 00:00:00 2001
From: Stefan Lippers-Hollmann <s.L-H@gmx.de>
Date: Thu, 21 Aug 2008 13:46:11 +0200
Subject: [PATCH 288/869] USB: sisusbvga: add USB ID for 0711:0918 Magic
 Control Technology Corp.

sisusbvga: add USB ID for 0711:0918 Magic Control Technology Corp.

usb 1-2: new high speed USB device using ehci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: USB2VGA dongle found at address 4
usb 1-2: Allocated 8 output buffers
usb 1-2: 8MB 1 ch/1 r SDR SDRAM, bus width 32
usb 1-2: New USB device found, idVendor=0711, idProduct=0918
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0

Signed-off-by: Stefan Lippers-Hollmann <s.L-H@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/misc/sisusbvga/sisusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index fbace41a7cb..69c34a58e20 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -3270,6 +3270,7 @@ static struct usb_device_id sisusb_table [] = {
 	{ USB_DEVICE(0x0711, 0x0900) },
 	{ USB_DEVICE(0x0711, 0x0901) },
 	{ USB_DEVICE(0x0711, 0x0902) },
+	{ USB_DEVICE(0x0711, 0x0918) },
 	{ USB_DEVICE(0x182d, 0x021c) },
 	{ USB_DEVICE(0x182d, 0x0269) },
 	{ }
-- 
GitLab


From 0983e56835cbf4796e8f5780c549c32ac1c3afac Mon Sep 17 00:00:00 2001
From: Julien Brunel <brunel@diku.dk>
Date: Thu, 21 Aug 2008 19:46:30 +0200
Subject: [PATCH 289/869] [S390] drivers/s390: Use an IS_ERR test rather than a
 NULL test

In case of error, functions dasd_kmalloc_request and idal_buffer_alloc
return an ERR pointer, but never return the NULL pointer. So after a
call to one of these functions, a NULL test should be replaced by an
IS_ERR test.

A simplified version of the semantic patch that makes this change is
as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@correct_null_test@
expression x,E;
statement S1, S2;
@@
x =
(
  dasd_kmalloc_request(...)
|
  idal_buffer_alloc(...)
)
<... when != x = E
if (
(
- x@p2 != NULL
+ ! IS_ERR ( x )
|
- x@p2 == NULL
+ IS_ERR( x )
)
 )
S1
else S2
...>
? x = E;
// </smpl>

Signed-off-by:  Julien Brunel <brunel@diku.dk>
Signed-off-by:  Julia Lawall <julia@diku.dk>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/block/dasd_eer.c | 3 ++-
 drivers/s390/char/tape_char.c | 2 +-
 drivers/s390/char/tape_std.c  | 2 +-
 3 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index 29da4413ad4..bf512ac75b9 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -16,6 +16,7 @@
 #include <linux/poll.h>
 #include <linux/mutex.h>
 #include <linux/smp_lock.h>
+#include <linux/err.h>
 
 #include <asm/uaccess.h>
 #include <asm/atomic.h>
@@ -457,7 +458,7 @@ int dasd_eer_enable(struct dasd_device *device)
 
 	cqr = dasd_kmalloc_request("ECKD", 1 /* SNSS */,
 				   SNSS_DATA_SIZE, device);
-	if (!cqr)
+	if (IS_ERR(cqr))
 		return -ENOMEM;
 
 	cqr->startdev = device;
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index 687720b552d..be0ce2215c8 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -109,7 +109,7 @@ tapechar_check_idalbuffer(struct tape_device *device, size_t block_size)
 
 	/* The current idal buffer is not correct. Allocate a new one. */
 	new = idal_buffer_alloc(block_size, 0);
-	if (new == NULL)
+	if (IS_ERR(new))
 		return -ENOMEM;
 
 	if (device->char_data.idal_buf != NULL)
diff --git a/drivers/s390/char/tape_std.c b/drivers/s390/char/tape_std.c
index 2a1af4e60be..cc8fd781ee2 100644
--- a/drivers/s390/char/tape_std.c
+++ b/drivers/s390/char/tape_std.c
@@ -248,7 +248,7 @@ tape_std_mtsetblk(struct tape_device *device, int count)
 
 	/* Allocate a new idal buffer. */
 	new = idal_buffer_alloc(count, 0);
-	if (new == NULL)
+	if (IS_ERR(new))
 		return -ENOMEM;
 	if (device->char_data.idal_buf != NULL)
 		idal_buffer_free(device->char_data.idal_buf);
-- 
GitLab


From 3e972394f9ee1511e5fdbcf50ac7d79e9cf563bd Mon Sep 17 00:00:00 2001
From: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Date: Thu, 21 Aug 2008 19:46:31 +0200
Subject: [PATCH 290/869] [S390] Fix uninitialized spinlock use

Ever since commit 43ca5c3a1cefdaa09231d64485b8f676118bf1e0 ([S390] Convert
monitor calls to function calls.), the kernel refused to IPL with spinlock
debugging enabled.

BUG: spinlock bad magic on CPU#0, swapper/0
 lock: 00000000003a4668, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
CPU: 0 Not tainted 2.6.25 #1
Process swapper (pid: 0, task: 000000000034f958, ksp: 0000000000377d60)
0000000000377ab8 0000000000352628 0000000000377d60 0000000000377d60
       0000000000016af4 00000000fffff7b5 0000000000377d60 0000000000000000
       0000000000000000 0000000000377a18 0000000000000009 0000000000377a18
       0000000000377a78 000000000023c920 0000000000016af4 0000000000377a18
       0000000000000005 0000000000000000 0000000000377b58 0000000000377ab8
Call Trace:
([<0000000000016a60>] show_trace+0xdc/0x108)
 [<0000000000016b4e>] show_stack+0xc2/0xfc
 [<0000000000016c9a>] dump_stack+0xb2/0xc0
 [<0000000000172dd4>]

Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/process.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 9839767d084..3e2c05cb6a8 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -75,7 +75,9 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
 	return sf->gprs[8];
 }
 
-DEFINE_PER_CPU(struct s390_idle_data, s390_idle);
+DEFINE_PER_CPU(struct s390_idle_data, s390_idle) = {
+	.lock = __SPIN_LOCK_UNLOCKED(s390_idle.lock)
+};
 
 static int s390_idle_enter(void)
 {
-- 
GitLab


From 8853e505a15f31fe608cb50e038ba2f794eed923 Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Thu, 21 Aug 2008 19:46:32 +0200
Subject: [PATCH 291/869] [S390] Remove unneeded spinlock initialization.

Remove the now unneeded s390_idle.lock spinlock initialization after
Josef Sipek did it the right way in arch/s390/kernel/process.c.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/smp.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index b795b3e24af..00b9b4dec5e 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -610,7 +610,6 @@ static void __init smp_create_idle(unsigned int cpu)
 	if (IS_ERR(p))
 		panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
 	current_set[cpu] = p;
-	spin_lock_init(&(&per_cpu(s390_idle, cpu))->lock);
 }
 
 static int __cpuinit smp_alloc_lowcore(int cpu)
@@ -845,7 +844,6 @@ void __init smp_prepare_boot_cpu(void)
 	current_set[0] = current;
 	smp_cpu_state[0] = CPU_STATE_CONFIGURED;
 	smp_cpu_polarization[0] = POLARIZATION_UNKNWN;
-	spin_lock_init(&(&__get_cpu_var(s390_idle))->lock);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
-- 
GitLab


From 53b41ba7ce4563c33a0449fbcbbd70665477d654 Mon Sep 17 00:00:00 2001
From: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Thu, 21 Aug 2008 19:46:33 +0200
Subject: [PATCH 292/869] [S390] qdio: prevent oopsing if qdio_establish fails

If qdio_establish fails we call qdio_shutdown to cleanup the
qdio subchannel. The tiq_list entry may not be valid at that
time, therefore we must ignore queues with an invalid list entry
in tiqdio_remove_input_queues.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/qdio_thinint.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/cio/qdio_thinint.c b/drivers/s390/cio/qdio_thinint.c
index 9291a771d81..ea7f6140026 100644
--- a/drivers/s390/cio/qdio_thinint.c
+++ b/drivers/s390/cio/qdio_thinint.c
@@ -113,7 +113,11 @@ void tiqdio_remove_input_queues(struct qdio_irq *irq_ptr)
 	struct qdio_q *q;
 	int i;
 
-	for_each_input_queue(irq_ptr, q, i) {
+	for (i = 0; i < irq_ptr->nr_input_qs; i++) {
+		q = irq_ptr->input_qs[i];
+		/* if establish triggered an error */
+		if (!q || !q->entry.prev || !q->entry.next)
+			continue;
 		list_del_rcu(&q->entry);
 		synchronize_rcu();
 	}
-- 
GitLab


From 58eb27cd7f4f1de2932b3e0e39ea54a27e9fef43 Mon Sep 17 00:00:00 2001
From: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Thu, 21 Aug 2008 19:46:34 +0200
Subject: [PATCH 293/869] [S390] qdio: improve s390 debug feature usage

Improve s390 debug feature usage:
- log busy bit in dbf
- increase size of dbf views
- consistent logging of qdio api calls to setup view
- print subchannel number so one can associate the interface
  with the dbf data
- only log events to one view

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/qdio_debug.h |  6 +--
 drivers/s390/cio/qdio_main.c  | 70 +++++++++++++++++------------------
 drivers/s390/cio/qdio_setup.c |  6 +--
 3 files changed, 40 insertions(+), 42 deletions(-)

diff --git a/drivers/s390/cio/qdio_debug.h b/drivers/s390/cio/qdio_debug.h
index 8484b83698e..5a4d85b829a 100644
--- a/drivers/s390/cio/qdio_debug.h
+++ b/drivers/s390/cio/qdio_debug.h
@@ -61,18 +61,18 @@
 
 /* s390dbf views */
 #define QDIO_DBF_SETUP_LEN		8
-#define QDIO_DBF_SETUP_PAGES		4
+#define QDIO_DBF_SETUP_PAGES		8
 #define QDIO_DBF_SETUP_NR_AREAS		1
 
 #define QDIO_DBF_TRACE_LEN		8
 #define QDIO_DBF_TRACE_NR_AREAS		2
 
 #ifdef CONFIG_QDIO_DEBUG
-#define QDIO_DBF_TRACE_PAGES		16
+#define QDIO_DBF_TRACE_PAGES		32
 #define QDIO_DBF_SETUP_LEVEL		6
 #define QDIO_DBF_TRACE_LEVEL		4
 #else /* !CONFIG_QDIO_DEBUG */
-#define QDIO_DBF_TRACE_PAGES		4
+#define QDIO_DBF_TRACE_PAGES		8
 #define QDIO_DBF_SETUP_LEVEL		2
 #define QDIO_DBF_TRACE_LEVEL		2
 #endif /* CONFIG_QDIO_DEBUG */
diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index d15648514a0..444fc7e521d 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -330,6 +330,7 @@ static int qdio_siga_output(struct qdio_q *q)
 	int cc;
 	u32 busy_bit;
 	u64 start_time = 0;
+	char dbf_text[15];
 
 	QDIO_DBF_TEXT5(0, trace, "sigaout");
 	QDIO_DBF_HEX5(0, trace, &q, sizeof(void *));
@@ -338,6 +339,9 @@ static int qdio_siga_output(struct qdio_q *q)
 again:
 	cc = qdio_do_siga_output(q, &busy_bit);
 	if (queue_type(q) == QDIO_IQDIO_QFMT && cc == 2 && busy_bit) {
+		sprintf(dbf_text, "bb%4x%2x", q->irq_ptr->schid.sch_no, q->nr);
+		QDIO_DBF_TEXT3(0, trace, dbf_text);
+
 		if (!start_time)
 			start_time = get_usecs();
 		else if ((get_usecs() - start_time) < QDIO_BUSY_BIT_PATIENCE)
@@ -748,16 +752,18 @@ static void qdio_kick_outbound_q(struct qdio_q *q)
 	rc = qdio_siga_output(q);
 	switch (rc) {
 	case 0:
-		/* went smooth this time, reset timestamp */
-		q->u.out.timestamp = 0;
-
 		/* TODO: improve error handling for CC=0 case */
 #ifdef CONFIG_QDIO_DEBUG
-		QDIO_DBF_TEXT3(0, trace, "cc2reslv");
-		sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no, q->nr,
-			atomic_read(&q->u.out.busy_siga_counter));
-		QDIO_DBF_TEXT3(0, trace, dbf_text);
+		if (q->u.out.timestamp) {
+			QDIO_DBF_TEXT3(0, trace, "cc2reslv");
+			sprintf(dbf_text, "%4x%2x%2x", q->irq_ptr->schid.sch_no,
+				q->nr,
+				atomic_read(&q->u.out.busy_siga_counter));
+			QDIO_DBF_TEXT3(0, trace, dbf_text);
+		}
 #endif /* CONFIG_QDIO_DEBUG */
+		/* went smooth this time, reset timestamp */
+		q->u.out.timestamp = 0;
 		break;
 	/* cc=2 and busy bit */
 	case (2 | QDIO_ERROR_SIGA_BUSY):
@@ -1066,14 +1072,12 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 	if (IS_ERR(irb)) {
 		switch (PTR_ERR(irb)) {
 		case -EIO:
-			sprintf(dbf_text, "ierr%4x",
-				cdev->private->schid.sch_no);
+			sprintf(dbf_text, "ierr%4x", irq_ptr->schid.sch_no);
 			QDIO_DBF_TEXT2(1, setup, dbf_text);
 			qdio_int_error(cdev);
 			return;
 		case -ETIMEDOUT:
-			sprintf(dbf_text, "qtoh%4x",
-				cdev->private->schid.sch_no);
+			sprintf(dbf_text, "qtoh%4x", irq_ptr->schid.sch_no);
 			QDIO_DBF_TEXT2(1, setup, dbf_text);
 			qdio_int_error(cdev);
 			return;
@@ -1124,8 +1128,10 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
 struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev)
 {
 	struct qdio_irq *irq_ptr;
+	char dbf_text[15];
 
-	QDIO_DBF_TEXT0(0, setup, "getssqd");
+	sprintf(dbf_text, "qssq%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
 
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
@@ -1149,14 +1155,13 @@ int qdio_cleanup(struct ccw_device *cdev, int how)
 	char dbf_text[15];
 	int rc;
 
+	sprintf(dbf_text, "qcln%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
 
-	sprintf(dbf_text, "qcln%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT1(0, trace, dbf_text);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-
 	rc = qdio_shutdown(cdev, how);
 	if (rc == 0)
 		rc = qdio_free(cdev);
@@ -1191,6 +1196,9 @@ int qdio_shutdown(struct ccw_device *cdev, int how)
 	unsigned long flags;
 	char dbf_text[15];
 
+	sprintf(dbf_text, "qshu%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
@@ -1205,10 +1213,6 @@ int qdio_shutdown(struct ccw_device *cdev, int how)
 		return 0;
 	}
 
-	sprintf(dbf_text, "qsqs%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT1(0, trace, dbf_text);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-
 	tiqdio_remove_input_queues(irq_ptr);
 	qdio_shutdown_queues(cdev);
 	qdio_shutdown_debug_entries(irq_ptr, cdev);
@@ -1263,16 +1267,14 @@ int qdio_free(struct ccw_device *cdev)
 	struct qdio_irq *irq_ptr;
 	char dbf_text[15];
 
+	sprintf(dbf_text, "qfre%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
 
 	mutex_lock(&irq_ptr->setup_mutex);
-
-	sprintf(dbf_text, "qfqs%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT1(0, trace, dbf_text);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-
 	cdev->private->qdio_data = NULL;
 	mutex_unlock(&irq_ptr->setup_mutex);
 
@@ -1295,7 +1297,6 @@ int qdio_initialize(struct qdio_initialize *init_data)
 
 	sprintf(dbf_text, "qini%4x", init_data->cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT0(0, setup, dbf_text);
-	QDIO_DBF_TEXT0(0, trace, dbf_text);
 
 	rc = qdio_allocate(init_data);
 	if (rc)
@@ -1319,7 +1320,6 @@ int qdio_allocate(struct qdio_initialize *init_data)
 
 	sprintf(dbf_text, "qalc%4x", init_data->cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT0(0, setup, dbf_text);
-	QDIO_DBF_TEXT0(0, trace, dbf_text);
 
 	if ((init_data->no_input_qs && !init_data->input_handler) ||
 	    (init_data->no_output_qs && !init_data->output_handler))
@@ -1389,6 +1389,9 @@ int qdio_establish(struct qdio_initialize *init_data)
 	unsigned long saveflags;
 	int rc;
 
+	sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
@@ -1399,10 +1402,6 @@ int qdio_establish(struct qdio_initialize *init_data)
 	if (!try_module_get(THIS_MODULE))
 		return -EINVAL;
 
-	sprintf(dbf_text, "qest%4x", cdev->private->schid.sch_no);
-	QDIO_DBF_TEXT0(0, setup, dbf_text);
-	QDIO_DBF_TEXT0(0, trace, dbf_text);
-
 	mutex_lock(&irq_ptr->setup_mutex);
 	qdio_setup_irq(init_data);
 
@@ -1472,6 +1471,9 @@ int qdio_activate(struct ccw_device *cdev)
 	unsigned long saveflags;
 	char dbf_text[20];
 
+	sprintf(dbf_text, "qact%4x", cdev->private->schid.sch_no);
+	QDIO_DBF_TEXT0(0, setup, dbf_text);
+
 	irq_ptr = cdev->private->qdio_data;
 	if (!irq_ptr)
 		return -ENODEV;
@@ -1485,10 +1487,6 @@ int qdio_activate(struct ccw_device *cdev)
 		goto out;
 	}
 
-	sprintf(dbf_text, "qact%4x", irq_ptr->schid.sch_no);
-	QDIO_DBF_TEXT2(0, setup, dbf_text);
-	QDIO_DBF_TEXT2(0, trace, dbf_text);
-
 	irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd;
 	irq_ptr->ccw.flags = CCW_FLAG_SLI;
 	irq_ptr->ccw.count = irq_ptr->aqueue.count;
@@ -1663,7 +1661,7 @@ int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
 #ifdef CONFIG_QDIO_DEBUG
 	char dbf_text[20];
 
-	sprintf(dbf_text, "doQD%04x", cdev->private->schid.sch_no);
+	sprintf(dbf_text, "doQD%4x", cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT3(0, trace, dbf_text);
 #endif /* CONFIG_QDIO_DEBUG */
 
diff --git a/drivers/s390/cio/qdio_setup.c b/drivers/s390/cio/qdio_setup.c
index 1bd2a208db2..1679e2f91c9 100644
--- a/drivers/s390/cio/qdio_setup.c
+++ b/drivers/s390/cio/qdio_setup.c
@@ -165,7 +165,7 @@ static void setup_queues(struct qdio_irq *irq_ptr,
 	void **output_sbal_array = qdio_init->output_sbal_addr_array;
 	int i;
 
-	sprintf(dbf_text, "qfqs%4x", qdio_init->cdev->private->schid.sch_no);
+	sprintf(dbf_text, "qset%4x", qdio_init->cdev->private->schid.sch_no);
 	QDIO_DBF_TEXT0(0, setup, dbf_text);
 
 	for_each_input_queue(irq_ptr, q, i) {
@@ -285,7 +285,7 @@ void qdio_setup_ssqd_info(struct qdio_irq *irq_ptr)
 	rc = __get_ssqd_info(irq_ptr);
 	if (rc) {
 		QDIO_DBF_TEXT2(0, setup, "ssqdasig");
-		sprintf(dbf_text, "schno%x", irq_ptr->schid.sch_no);
+		sprintf(dbf_text, "schn%4x", irq_ptr->schid.sch_no);
 		QDIO_DBF_TEXT2(0, setup, dbf_text);
 		sprintf(dbf_text, "rc:%d", rc);
 		QDIO_DBF_TEXT2(0, setup, dbf_text);
@@ -447,7 +447,7 @@ void qdio_print_subchannel_info(struct qdio_irq *irq_ptr,
 {
 	char s[80];
 
-	sprintf(s, "%s ", cdev->dev.bus_id);
+	sprintf(s, "%s sc:%x ", cdev->dev.bus_id, irq_ptr->schid.sch_no);
 
 	switch (irq_ptr->qib.qfmt) {
 	case QDIO_QETH_QFMT:
-- 
GitLab


From 0686e402c365c92396d4c7abfaa24810f9cb77cc Mon Sep 17 00:00:00 2001
From: Jan Glauber <jang@linux.vnet.ibm.com>
Date: Thu, 21 Aug 2008 19:46:35 +0200
Subject: [PATCH 294/869] [S390] qdio: remove the module_get & module_put pair

Increasing the qdio reference count for every used subchannel
is unnecessary since unloading qdio (if build as a module) is
only possible if other modules that use qdio are unloaded.
Unloading modules that use qdio in turn requires that these
modules shut down all qdio subchannels. Therefore the additional
module_get reference is not needed.

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/qdio_main.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c
index 444fc7e521d..e6eabc85342 100644
--- a/drivers/s390/cio/qdio_main.c
+++ b/drivers/s390/cio/qdio_main.c
@@ -1251,7 +1251,6 @@ no_cleanup:
 
 	qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
 	mutex_unlock(&irq_ptr->setup_mutex);
-	module_put(THIS_MODULE);
 	if (rc)
 		return rc;
 	return 0;
@@ -1399,9 +1398,6 @@ int qdio_establish(struct qdio_initialize *init_data)
 	if (cdev->private->state != DEV_STATE_ONLINE)
 		return -EINVAL;
 
-	if (!try_module_get(THIS_MODULE))
-		return -EINVAL;
-
 	mutex_lock(&irq_ptr->setup_mutex);
 	qdio_setup_irq(init_data);
 
-- 
GitLab


From 16f7f9564c3ae190954f2ec55f385a268b93ac4d Mon Sep 17 00:00:00 2001
From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Date: Thu, 21 Aug 2008 19:46:36 +0200
Subject: [PATCH 295/869] [S390] cio: fix ccw group device cleanup

Fix ccw group device initialization: initialize device object before
using reference counting during cleanup.

Fixes the following message when group device initialization fails
(e.g. because too few devices where specified):

  kobject: '<NULL>' (..): is not initialized, yet kobject_put() is
           being called.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/ccwgroup.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 26a930e832b..e0ce65fca4e 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -112,8 +112,10 @@ ccwgroup_release (struct device *dev)
 	gdev = to_ccwgroupdev(dev);
 
 	for (i = 0; i < gdev->count; i++) {
-		dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
-		put_device(&gdev->cdev[i]->dev);
+		if (gdev->cdev[i]) {
+			dev_set_drvdata(&gdev->cdev[i]->dev, NULL);
+			put_device(&gdev->cdev[i]->dev);
+		}
 	}
 	kfree(gdev);
 }
@@ -221,6 +223,13 @@ int ccwgroup_create_from_string(struct device *root, unsigned int creator_id,
 	atomic_set(&gdev->onoff, 0);
 	mutex_init(&gdev->reg_mutex);
 	mutex_lock(&gdev->reg_mutex);
+	gdev->creator_id = creator_id;
+	gdev->count = num_devices;
+	gdev->dev.bus = &ccwgroup_bus_type;
+	gdev->dev.parent = root;
+	gdev->dev.release = ccwgroup_release;
+	device_initialize(&gdev->dev);
+
 	curr_buf = buf;
 	for (i = 0; i < num_devices && curr_buf; i++) {
 		rc = __get_next_bus_id(&curr_buf, tmp_bus_id);
@@ -258,16 +267,11 @@ int ccwgroup_create_from_string(struct device *root, unsigned int creator_id,
 		rc = -EINVAL;
 		goto error;
 	}
-	gdev->creator_id = creator_id;
-	gdev->count = num_devices;
-	gdev->dev.bus = &ccwgroup_bus_type;
-	gdev->dev.parent = root;
-	gdev->dev.release = ccwgroup_release;
 
 	snprintf (gdev->dev.bus_id, BUS_ID_SIZE, "%s",
 			gdev->cdev[0]->dev.bus_id);
 
-	rc = device_register(&gdev->dev);
+	rc = device_add(&gdev->dev);
 	if (rc)
 		goto error;
 	get_device(&gdev->dev);
-- 
GitLab


From 152382af4056aadc0c2ea2e8e8258b277be085bf Mon Sep 17 00:00:00 2001
From: Eric Sandeen <sandeen@redhat.com>
Date: Thu, 21 Aug 2008 19:46:37 +0200
Subject: [PATCH 296/869] [S390] fix ext2_find_next_bit

ext4 does not work on s390 because ext2_find_next_bit is broken. Fortunately
this function is only used by ext4. The function uses ffs which does not work
analog to ffz. The result of ffs has an offset of 1 which is not taken into
account. To fix this use the low level __ffs_word function directly instead
of the ill defined ffs.

In addition the patch improves find_next_zero_bit and ext2_find_next_zero_bit
by passing the bit offset into __ffz_word instead of adding it after the
function call returned.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/include/asm/bitops.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
index b4eb24ab5af..8e9243ae0c1 100644
--- a/arch/s390/include/asm/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -709,7 +709,7 @@ static inline int find_next_zero_bit (const unsigned long * addr,
 		 * __ffz_word returns __BITOPS_WORDSIZE
 		 * if no zero bit is present in the word.
 		 */
-		set = __ffz_word(0, *p >> bit) + bit;
+		set = __ffz_word(bit, *p >> bit);
 		if (set >= size)
 			return size + offset;
 		if (set < __BITOPS_WORDSIZE)
@@ -824,7 +824,7 @@ static inline int ext2_find_next_zero_bit(void *vaddr, unsigned long size,
 		 * s390 version of ffz returns __BITOPS_WORDSIZE
 		 * if no zero bit is present in the word.
 		 */
-		set = ffz(__load_ulong_le(p, 0) >> bit) + bit;
+		set = __ffz_word(bit, __load_ulong_le(p, 0) >> bit);
 		if (set >= size)
 			return size + offset;
 		if (set < __BITOPS_WORDSIZE)
@@ -865,7 +865,7 @@ static inline int ext2_find_next_bit(void *vaddr, unsigned long size,
 		 * s390 version of ffz returns __BITOPS_WORDSIZE
 		 * if no zero bit is present in the word.
 		 */
-		set = ffs(__load_ulong_le(p, 0) >> bit) + bit;
+		set = __ffs_word(0, __load_ulong_le(p, 0) & (~0UL << bit));
 		if (set >= size)
 			return size + offset;
 		if (set < __BITOPS_WORDSIZE)
-- 
GitLab


From 49fd38bdaa96f093fcad3176a781a4d0de8f8602 Mon Sep 17 00:00:00 2001
From: Stefan Weinhuber <wein@de.ibm.com>
Date: Thu, 21 Aug 2008 19:46:38 +0200
Subject: [PATCH 297/869] [S390] dasd: fix data size for PSF/PRSSD command

The Perform Subsystem Function/Prepare for Read Subsystem Data
command requires 12 bytes of parameter data, but the respective data
structure dasd_psf_prssd_data has a length of 16 bytes.
Current storage servers ignore the obsolete bytes, but older models
fail to execute the command and report an incorrect length error.
This causes the device initilization for these devices to fail.
To fix this problem we need to correct the dasd_psf_prssd_data
structure and shorten it to the correct length.

Reported-by: Ivan Warren <ivan@vmfacility.fr>
Reviewed-by: Ivan Warren <ivan@vmfacility.fr>
Tested-by: Ivan Warren <ivan@vmfacility.fr>
CC: stable <stable@kernel.org>
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
---
 drivers/s390/block/dasd_eckd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/block/dasd_eckd.h b/drivers/s390/block/dasd_eckd.h
index 4bf0aa5112c..2476f87d21d 100644
--- a/drivers/s390/block/dasd_eckd.h
+++ b/drivers/s390/block/dasd_eckd.h
@@ -308,7 +308,7 @@ struct dasd_psf_prssd_data {
 	unsigned char flags;
 	unsigned char reserved[4];
 	unsigned char suborder;
-	unsigned char varies[9];
+	unsigned char varies[5];
 } __attribute__ ((packed));
 
 /*
-- 
GitLab


From 91c36919a456589f4f073671474a1f899e0d3c2b Mon Sep 17 00:00:00 2001
From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Date: Thu, 21 Aug 2008 19:46:39 +0200
Subject: [PATCH 298/869] [S390] cio: call ccw driver notify function with lock
 held

Calling a ccw driver's notify function without the ccw device lock
held opens up a race window between discovery and handling of a change
in the device operational state. As a result, the device driver may
encounter unexpected device malfunction, leading to out-of-retry
situations or similar.

Remove race by extending the ccw device lock from state change
discovery to the calling of the notify function.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/block/dasd.c     |  5 +----
 drivers/s390/cio/css.c        |  1 -
 drivers/s390/cio/device.c     | 40 +++++++++++++++++------------------
 drivers/s390/cio/device.h     |  2 +-
 drivers/s390/cio/device_fsm.c | 31 ++++++++++++++++-----------
 5 files changed, 41 insertions(+), 38 deletions(-)

diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 1b6c52ef733..acb78017e7d 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2333,13 +2333,11 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 {
 	struct dasd_device *device;
 	struct dasd_ccw_req *cqr;
-	unsigned long flags;
 	int ret;
 
-	device = dasd_device_from_cdev(cdev);
+	device = dasd_device_from_cdev_locked(cdev);
 	if (IS_ERR(device))
 		return 0;
-	spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
 	ret = 0;
 	switch (event) {
 	case CIO_GONE:
@@ -2369,7 +2367,6 @@ int dasd_generic_notify(struct ccw_device *cdev, int event)
 		ret = 1;
 		break;
 	}
-	spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
 	dasd_put_device(device);
 	return ret;
 }
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 46c021d880d..51489eff6b0 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -477,7 +477,6 @@ void css_schedule_eval_all(void)
 
 void css_wait_for_slow_path(void)
 {
-	flush_workqueue(ccw_device_notify_work);
 	flush_workqueue(slow_path_wq);
 }
 
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index e818d0c54c0..28221030b88 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -150,7 +150,6 @@ static struct css_driver io_subchannel_driver = {
 };
 
 struct workqueue_struct *ccw_device_work;
-struct workqueue_struct *ccw_device_notify_work;
 wait_queue_head_t ccw_device_init_wq;
 atomic_t ccw_device_init_count;
 
@@ -168,11 +167,6 @@ init_ccw_bus_type (void)
 	ccw_device_work = create_singlethread_workqueue("cio");
 	if (!ccw_device_work)
 		return -ENOMEM; /* FIXME: better errno ? */
-	ccw_device_notify_work = create_singlethread_workqueue("cio_notify");
-	if (!ccw_device_notify_work) {
-		ret = -ENOMEM; /* FIXME: better errno ? */
-		goto out_err;
-	}
 	slow_path_wq = create_singlethread_workqueue("kslowcrw");
 	if (!slow_path_wq) {
 		ret = -ENOMEM; /* FIXME: better errno ? */
@@ -192,8 +186,6 @@ init_ccw_bus_type (void)
 out_err:
 	if (ccw_device_work)
 		destroy_workqueue(ccw_device_work);
-	if (ccw_device_notify_work)
-		destroy_workqueue(ccw_device_notify_work);
 	if (slow_path_wq)
 		destroy_workqueue(slow_path_wq);
 	return ret;
@@ -204,7 +196,6 @@ cleanup_ccw_bus_type (void)
 {
 	css_driver_unregister(&io_subchannel_driver);
 	bus_unregister(&ccw_bus_type);
-	destroy_workqueue(ccw_device_notify_work);
 	destroy_workqueue(ccw_device_work);
 }
 
@@ -1496,11 +1487,22 @@ static void device_set_disconnected(struct ccw_device *cdev)
 		ccw_device_schedule_recovery();
 }
 
+void ccw_device_set_notoper(struct ccw_device *cdev)
+{
+	struct subchannel *sch = to_subchannel(cdev->dev.parent);
+
+	CIO_TRACE_EVENT(2, "notoper");
+	CIO_TRACE_EVENT(2, sch->dev.bus_id);
+	ccw_device_set_timeout(cdev, 0);
+	cio_disable_subchannel(sch);
+	cdev->private->state = DEV_STATE_NOT_OPER;
+}
+
 static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 {
 	int event, ret, disc;
 	unsigned long flags;
-	enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE } action;
+	enum { NONE, UNREGISTER, UNREGISTER_PROBE, REPROBE, DISC } action;
 	struct ccw_device *cdev;
 
 	spin_lock_irqsave(sch->lock, flags);
@@ -1535,16 +1537,11 @@ static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 		}
 		/* fall through */
 	case CIO_GONE:
-		/* Prevent unwanted effects when opening lock. */
-		cio_disable_subchannel(sch);
-		device_set_disconnected(cdev);
 		/* Ask driver what to do with device. */
-		action = UNREGISTER;
-		spin_unlock_irqrestore(sch->lock, flags);
-		ret = io_subchannel_notify(sch, event);
-		spin_lock_irqsave(sch->lock, flags);
-		if (ret)
-			action = NONE;
+		if (io_subchannel_notify(sch, event))
+			action = DISC;
+		else
+			action = UNREGISTER;
 		break;
 	case CIO_REVALIDATE:
 		/* Device will be removed, so no notify necessary. */
@@ -1565,6 +1562,7 @@ static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 	switch (action) {
 	case UNREGISTER:
 	case UNREGISTER_PROBE:
+		ccw_device_set_notoper(cdev);
 		/* Unregister device (will use subchannel lock). */
 		spin_unlock_irqrestore(sch->lock, flags);
 		css_sch_device_unregister(sch);
@@ -1577,6 +1575,9 @@ static int io_subchannel_sch_event(struct subchannel *sch, int slow)
 	case REPROBE:
 		ccw_device_trigger_reprobe(cdev);
 		break;
+	case DISC:
+		device_set_disconnected(cdev);
+		break;
 	default:
 		break;
 	}
@@ -1828,5 +1829,4 @@ EXPORT_SYMBOL(ccw_driver_unregister);
 EXPORT_SYMBOL(get_ccwdev_by_busid);
 EXPORT_SYMBOL(ccw_bus_type);
 EXPORT_SYMBOL(ccw_device_work);
-EXPORT_SYMBOL(ccw_device_notify_work);
 EXPORT_SYMBOL_GPL(ccw_device_get_subchannel_id);
diff --git a/drivers/s390/cio/device.h b/drivers/s390/cio/device.h
index 9800a8335a3..6f5c3f2b358 100644
--- a/drivers/s390/cio/device.h
+++ b/drivers/s390/cio/device.h
@@ -72,7 +72,6 @@ dev_fsm_final_state(struct ccw_device *cdev)
 }
 
 extern struct workqueue_struct *ccw_device_work;
-extern struct workqueue_struct *ccw_device_notify_work;
 extern wait_queue_head_t ccw_device_init_wq;
 extern atomic_t ccw_device_init_count;
 
@@ -120,6 +119,7 @@ int ccw_device_stlck(struct ccw_device *);
 void ccw_device_trigger_reprobe(struct ccw_device *);
 void ccw_device_kill_io(struct ccw_device *);
 int ccw_device_notify(struct ccw_device *, int);
+void ccw_device_set_notoper(struct ccw_device *cdev);
 
 /* qdio needs this. */
 void ccw_device_set_timeout(struct ccw_device *, int);
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 8b5fe57fb2f..550508df952 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -337,26 +337,34 @@ int ccw_device_notify(struct ccw_device *cdev, int event)
 		return 0;
 	if (!cdev->online)
 		return 0;
+	CIO_MSG_EVENT(2, "notify called for 0.%x.%04x, event=%d\n",
+		      cdev->private->dev_id.ssid, cdev->private->dev_id.devno,
+		      event);
 	return cdev->drv->notify ? cdev->drv->notify(cdev, event) : 0;
 }
 
-static void
-ccw_device_oper_notify(struct work_struct *work)
+static void cmf_reenable_delayed(struct work_struct *work)
 {
 	struct ccw_device_private *priv;
 	struct ccw_device *cdev;
-	int ret;
 
 	priv = container_of(work, struct ccw_device_private, kick_work);
 	cdev = priv->cdev;
-	ret = ccw_device_notify(cdev, CIO_OPER);
-	if (ret) {
+	cmf_reenable(cdev);
+}
+
+static void ccw_device_oper_notify(struct ccw_device *cdev)
+{
+	if (ccw_device_notify(cdev, CIO_OPER)) {
 		/* Reenable channel measurements, if needed. */
-		cmf_reenable(cdev);
-		wake_up(&cdev->private->wait_q);
-	} else
-		/* Driver doesn't want device back. */
-		ccw_device_do_unreg_rereg(work);
+		PREPARE_WORK(&cdev->private->kick_work, cmf_reenable_delayed);
+		queue_work(ccw_device_work, &cdev->private->kick_work);
+		return;
+	}
+	/* Driver doesn't want device back. */
+	ccw_device_set_notoper(cdev);
+	PREPARE_WORK(&cdev->private->kick_work, ccw_device_do_unreg_rereg);
+	queue_work(ccw_device_work, &cdev->private->kick_work);
 }
 
 /*
@@ -386,8 +394,7 @@ ccw_device_done(struct ccw_device *cdev, int state)
 
 	if (cdev->private->flags.donotify) {
 		cdev->private->flags.donotify = 0;
-		PREPARE_WORK(&cdev->private->kick_work, ccw_device_oper_notify);
-		queue_work(ccw_device_notify_work, &cdev->private->kick_work);
+		ccw_device_oper_notify(cdev);
 	}
 	wake_up(&cdev->private->wait_q);
 
-- 
GitLab


From 04f64b5756872b474d9429e3b6987ada10bb8012 Mon Sep 17 00:00:00 2001
From: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Date: Thu, 21 Aug 2008 19:46:40 +0200
Subject: [PATCH 299/869] [S390] dcssblk: fix race in dcssblk_add_store()

Concurrently adding the same segment may lead to duplicate device_register()
calls, which will trigger an error in kobject code:
"... don't try to register things with the same name in the same directory".
This patch adds a check to avoid this.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/block/dcssblk.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index 01fcdd91b84..db85f1fb131 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -384,6 +384,10 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
 	 * get minor, add to list
 	 */
 	down_write(&dcssblk_devices_sem);
+	if (dcssblk_get_segment_by_name(local_buf)) {
+		rc = -EEXIST;
+		goto release_gd;
+	}
 	rc = dcssblk_assign_free_minor(dev_info);
 	if (rc) {
 		up_write(&dcssblk_devices_sem);
-- 
GitLab


From cce7496d3d5910a003109207f9737c3be658aa1a Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Thu, 21 Aug 2008 19:46:41 +0200
Subject: [PATCH 300/869] [S390] Update default configuration.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/defconfig | 54 +++++++++++++++++++++++++++++++--------------
 1 file changed, 38 insertions(+), 16 deletions(-)

diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index c5cdb975d59..9b0bc2c9fba 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Fri May 30 09:49:33 2008
+# Linux kernel version: 2.6.27-rc4
+# Thu Aug 21 19:43:29 2008
 #
 CONFIG_SCHED_MC=y
 CONFIG_MMU=y
@@ -68,7 +68,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -93,11 +92,17 @@ CONFIG_SLAB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -113,6 +118,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -175,6 +181,8 @@ CONFIG_PREEMPT=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -185,8 +193,12 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_MEMORY_HOTPLUG=y
+CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -198,6 +210,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_MACHCHK_WARNING=y
 CONFIG_QDIO=y
 # CONFIG_QDIO_DEBUG is not set
+CONFIG_CHSC_SCH=m
 
 #
 # Misc
@@ -206,6 +219,7 @@ CONFIG_IPL=y
 # CONFIG_IPL_TAPE is not set
 CONFIG_IPL_VM=y
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=9
 # CONFIG_PROCESS_DEBUG is not set
@@ -226,10 +240,6 @@ CONFIG_S390_HYPFS_FS=y
 CONFIG_KEXEC=y
 # CONFIG_ZFCPDUMP is not set
 CONFIG_S390_GUEST=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -364,7 +374,6 @@ CONFIG_NET_SCH_CBQ=m
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RR=m
 CONFIG_NET_SCH_RED=m
 CONFIG_NET_SCH_SFQ=m
 CONFIG_NET_SCH_TEQL=m
@@ -430,7 +439,9 @@ CONFIG_CCW=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 CONFIG_SYS_HYPERVISOR=y
@@ -507,6 +518,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
 CONFIG_ZFCP=y
+CONFIG_SCSI_DH=m
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_SCSI_DH_ALUA=m
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_MD_LINEAR=m
@@ -522,14 +538,10 @@ CONFIG_DM_CRYPT=y
 CONFIG_DM_SNAPSHOT=y
 CONFIG_DM_MIRROR=y
 CONFIG_DM_ZERO=y
-CONFIG_DM_MULTIPATH=y
-# CONFIG_DM_MULTIPATH_EMC is not set
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
+CONFIG_DM_MULTIPATH=m
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -544,7 +556,6 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_TR is not set
 # CONFIG_WAN is not set
@@ -576,7 +587,10 @@ CONFIG_DEVKMEM=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_VIRTIO=m
 # CONFIG_R3964 is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_MAX_RAW_DEVS=256
@@ -616,6 +630,7 @@ CONFIG_MONWRITER=m
 CONFIG_S390_VMUR=m
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -693,6 +708,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -712,7 +728,6 @@ CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -780,6 +795,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
@@ -789,6 +805,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_SAMPLES=y
 # CONFIG_SAMPLE_KOBJECT is not set
 # CONFIG_SAMPLE_KPROBES is not set
@@ -847,6 +864,10 @@ CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -895,6 +916,7 @@ CONFIG_BITREVERSE=m
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=m
 CONFIG_CRC7=m
-- 
GitLab


From 167e782e301188c7c7e31e486bbeea5f918324c1 Mon Sep 17 00:00:00 2001
From: Alex Chiang <achiang@hp.com>
Date: Thu, 21 Aug 2008 15:13:29 -0600
Subject: [PATCH 301/869] PCI: pciehp: Rename duplicate slot name N as N-1,
 N-2, N-M...

Commit 3800345f723fd130d50434d4717b99d4a9f383c8 (pciehp: fix slot name)
introduces the pciehp_slot_with_bus module parameter, which was intended
to help work around broken firmware that assigns the same name to multiple
slots.

Commit 9e4f2e8d4ddb04ad16a3828cd9a369a5a5287009 (pciehp: add message about
pciehp_slot_with_bus option) tells the user to use the above parameter
in the event of a name collision.

This approach is sub-optimal because it requires too much work from
the user.

Instead, let's rename the slot on behalf of the user. If firmware
assigns the name N to multiple slots, then:

	The first registered slot is assigned N
	The second registered slot is assigned N-1
	The third registered slot is assigned N-2
	The Mth registered slot becomes N-M

In the event we overflow the slot->name parameter, we report an
error to the user.

This is a temporary fix until the entire PCI core can be reworked
such that individual drivers no longer have to manage their own
slot names.

Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/hotplug/pciehp.h      |  1 -
 drivers/pci/hotplug/pciehp_core.c | 21 ++++++++++++++-------
 drivers/pci/hotplug/pciehp_hpc.c  | 11 +----------
 3 files changed, 15 insertions(+), 18 deletions(-)

diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index e3a1e7e7dba..9e6cec67e1c 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -43,7 +43,6 @@ extern int pciehp_poll_mode;
 extern int pciehp_poll_time;
 extern int pciehp_debug;
 extern int pciehp_force;
-extern int pciehp_slot_with_bus;
 extern struct workqueue_struct *pciehp_wq;
 
 #define dbg(format, arg...)						\
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 3677495c4f9..4fd5355bc3b 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -41,7 +41,6 @@ int pciehp_debug;
 int pciehp_poll_mode;
 int pciehp_poll_time;
 int pciehp_force;
-int pciehp_slot_with_bus;
 struct workqueue_struct *pciehp_wq;
 
 #define DRIVER_VERSION	"0.4"
@@ -56,12 +55,10 @@ module_param(pciehp_debug, bool, 0644);
 module_param(pciehp_poll_mode, bool, 0644);
 module_param(pciehp_poll_time, int, 0644);
 module_param(pciehp_force, bool, 0644);
-module_param(pciehp_slot_with_bus, bool, 0644);
 MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not");
 MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not");
 MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds");
 MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing");
-MODULE_PARM_DESC(pciehp_slot_with_bus, "Use bus number in the slot name");
 
 #define PCIE_MODULE_NAME "pciehp"
 
@@ -194,6 +191,7 @@ static int init_slots(struct controller *ctrl)
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
+	int len, dup = 1;
 	int retval = -ENOMEM;
 
 	list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
@@ -220,15 +218,24 @@ static int init_slots(struct controller *ctrl)
 		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
 		    "slot_device_offset=%x\n", slot->bus, slot->device,
 		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
+duplicate_name:
 		retval = pci_hp_register(hotplug_slot,
 					 ctrl->pci_dev->subordinate,
 					 slot->device);
 		if (retval) {
+			/*
+			 * If slot N already exists, we'll try to create
+			 * slot N-1, N-2 ... N-M, until we overflow.
+			 */
+			if (retval == -EEXIST) {
+				len = snprintf(slot->name, SLOT_NAME_SIZE,
+					       "%d-%d", slot->number, dup++);
+				if (len < SLOT_NAME_SIZE)
+					goto duplicate_name;
+				else
+					err("duplicate slot name overflow\n");
+			}
 			err("pci_hp_register failed with error %d\n", retval);
-			if (retval == -EEXIST)
-				err("Failed to register slot because of name "
-				    "collision. Try \'pciehp_slot_with_bus\' "
-				    "module option.\n");
 			goto error_info;
 		}
 		/* create additional sysfs entries */
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index ad27e9e225a..ab31f5ba665 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -1030,15 +1030,6 @@ static void pcie_shutdown_notification(struct controller *ctrl)
 	pciehp_free_irq(ctrl);
 }
 
-static void make_slot_name(struct slot *slot)
-{
-	if (pciehp_slot_with_bus)
-		snprintf(slot->name, SLOT_NAME_SIZE, "%04d_%04d",
-			 slot->bus, slot->number);
-	else
-		snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
-}
-
 static int pcie_init_slot(struct controller *ctrl)
 {
 	struct slot *slot;
@@ -1053,7 +1044,7 @@ static int pcie_init_slot(struct controller *ctrl)
 	slot->device = ctrl->slot_device_offset + slot->hp_slot;
 	slot->hpc_ops = ctrl->hpc_ops;
 	slot->number = ctrl->first_slot;
-	make_slot_name(slot);
+	snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
 	mutex_init(&slot->lock);
 	INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
 	list_add(&slot->slot_list, &ctrl->slot_list);
-- 
GitLab


From d6a9e9b40be7da84f82eb414c2ad98c5bb69986b Mon Sep 17 00:00:00 2001
From: Alex Chiang <achiang@hp.com>
Date: Thu, 21 Aug 2008 15:13:47 -0600
Subject: [PATCH 302/869] PCI: shpchp: Rename duplicate slot name N as N-1,
 N-2, N-M...

Commit ef0ff95f136f0f2d035667af5d18b824609de320 (shpchp: fix slot name)
introduces the shpchp_slot_with_bus module parameter, which was intended
to help work around broken firmware that assigns the same name to multiple
slots.

Commit b3bd307c628af2f0a581c42d5d7e4bcdbbf64b6a (shpchp: add message about
shpchp_slot_with_bus option) tells the user to use the above parameter
in the event of a name collision.

This approach is sub-optimal because it requires too much work from
the user.

Instead, let's rename the slot on behalf of the user. If firmware
assigns the name N to multiple slots, then:

	The first registered slot is assigned N
	The second registered slot is assigned N-1
	The third registered slot is assigned N-2
	The Mth registered slot becomes N-M

In the event we overflow the slot->name parameter, we report an
error to the user.

This is a temporary fix until the entire PCI core can be reworked
such that individual drivers no longer have to manage their own
slot names.

Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/hotplug/shpchp_core.c | 34 ++++++++++++++-----------------
 1 file changed, 15 insertions(+), 19 deletions(-)

diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index a8cbd039b85..cc38615395f 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -39,7 +39,6 @@
 int shpchp_debug;
 int shpchp_poll_mode;
 int shpchp_poll_time;
-static int shpchp_slot_with_bus;
 struct workqueue_struct *shpchp_wq;
 
 #define DRIVER_VERSION	"0.4"
@@ -53,11 +52,9 @@ MODULE_LICENSE("GPL");
 module_param(shpchp_debug, bool, 0644);
 module_param(shpchp_poll_mode, bool, 0644);
 module_param(shpchp_poll_time, int, 0644);
-module_param(shpchp_slot_with_bus, bool, 0644);
 MODULE_PARM_DESC(shpchp_debug, "Debugging mode enabled or not");
 MODULE_PARM_DESC(shpchp_poll_mode, "Using polling mechanism for hot-plug events or not");
 MODULE_PARM_DESC(shpchp_poll_time, "Polling mechanism frequency, in seconds");
-MODULE_PARM_DESC(shpchp_slot_with_bus, "Use bus number in the slot name");
 
 #define SHPC_MODULE_NAME "shpchp"
 
@@ -99,23 +96,13 @@ static void release_slot(struct hotplug_slot *hotplug_slot)
 	kfree(slot);
 }
 
-static void make_slot_name(struct slot *slot)
-{
-	if (shpchp_slot_with_bus)
-		snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d",
-			 slot->bus, slot->number);
-	else
-		snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%d",
-			 slot->number);
-}
-
 static int init_slots(struct controller *ctrl)
 {
 	struct slot *slot;
 	struct hotplug_slot *hotplug_slot;
 	struct hotplug_slot_info *info;
 	int retval = -ENOMEM;
-	int i;
+	int i, len, dup = 1;
 
 	for (i = 0; i < ctrl->num_slots; i++) {
 		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
@@ -146,7 +133,7 @@ static int init_slots(struct controller *ctrl)
 		/* register this slot with the hotplug pci core */
 		hotplug_slot->private = slot;
 		hotplug_slot->release = &release_slot;
-		make_slot_name(slot);
+		snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number);
 		hotplug_slot->ops = &shpchp_hotplug_slot_ops;
 
 		get_power_status(hotplug_slot, &info->power_status);
@@ -157,14 +144,23 @@ static int init_slots(struct controller *ctrl)
 		dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
 		    "slot_device_offset=%x\n", slot->bus, slot->device,
 		    slot->hp_slot, slot->number, ctrl->slot_device_offset);
+duplicate_name:
 		retval = pci_hp_register(slot->hotplug_slot,
 				ctrl->pci_dev->subordinate, slot->device);
 		if (retval) {
+			/*
+			 * If slot N already exists, we'll try to create
+			 * slot N-1, N-2 ... N-M, until we overflow.
+			 */
+			if (retval == -EEXIST) {
+				len = snprintf(slot->name, SLOT_NAME_SIZE,
+					       "%d-%d", slot->number, dup++);
+				if (len < SLOT_NAME_SIZE)
+					goto duplicate_name;
+				else
+					err("duplicate slot name overflow\n");
+			}
 			err("pci_hp_register failed with error %d\n", retval);
-			if (retval == -EEXIST)
-				err("Failed to register slot because of name "
-                                    "collision. Try \'shpchp_slot_with_bus\' "
-				    "module option.\n");
 			goto error_info;
 		}
 
-- 
GitLab


From ebca4f1bce1eb7b91a63c515db66316db9391221 Mon Sep 17 00:00:00 2001
From: Greg KH <gregkh@suse.de>
Date: Thu, 21 Aug 2008 13:47:58 -0700
Subject: [PATCH 303/869] PCI: fix reference leak in pci_get_dev_by_id()

Alex Chiang and Matthew Wilcox pointed out that pci_get_dev_by_id() does
not properly decrement the reference on the from pointer if it is
present, like the documentation for the function states it will.

It fixes a pretty bad leak in the hotplug core (we were leaking an
entire struct pci_dev for each function of each offlined card, the first
time around; subsequent onlines/offlines were ok).

Cc: Matthew Wilcox <matthew@wil.cx>
Cc: stable <stable@kernel.org>
Tested-by: Alex Chiang <achiang@hp.com>
Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
---
 drivers/pci/search.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/pci/search.c b/drivers/pci/search.c
index 217814fef4e..3b3b5f17879 100644
--- a/drivers/pci/search.c
+++ b/drivers/pci/search.c
@@ -280,6 +280,8 @@ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id,
 			      match_pci_dev_by_id);
 	if (dev)
 		pdev = to_pci_dev(dev);
+	if (from)
+		pci_dev_put(from);
 	return pdev;
 }
 
-- 
GitLab


From 7a6bb2622692495d1b7445a3e8c257601b803b02 Mon Sep 17 00:00:00 2001
From: Per Andersson <avtobiff@gmail.com>
Date: Mon, 11 Aug 2008 12:00:52 +0200
Subject: [PATCH 304/869] [ARM] Orion: Fix boot crash on Kurobox Pro

The Kurobox Pro crashes when any of the PCI controller registers
are accessed.  This patch adds a function to the Orion PCI handling
code that board support code can call to disable enumerating the
PCI bus entirely, and makes the Kurobox Pro PCI-related init code
call this function.

Signed-off-by: Per Andersson <avtobiff@gmail.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 arch/arm/mach-orion5x/common.h            |  1 +
 arch/arm/mach-orion5x/kurobox_pro-setup.c |  4 +++-
 arch/arm/mach-orion5x/pci.c               | 13 ++++++++++---
 3 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index e75bd7004b9..0bd195551a2 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -41,6 +41,7 @@ struct pci_bus;
 struct pci_sys_data;
 
 void orion5x_pcie_id(u32 *dev, u32 *rev);
+void orion5x_pci_disable(void);
 void orion5x_pci_set_cardbus_mode(void);
 int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
 struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index cb72f1bb9cb..e321ec33183 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -146,8 +146,10 @@ static struct hw_pci kurobox_pro_pci __initdata = {
 
 static int __init kurobox_pro_pci_init(void)
 {
-	if (machine_is_kurobox_pro())
+	if (machine_is_kurobox_pro()) {
+		orion5x_pci_disable();
 		pci_common_init(&kurobox_pro_pci);
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index fbceecc4b7e..a7b7d77b1b0 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -541,6 +541,13 @@ static void __devinit rc_pci_fixup(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
 
+static int orion5x_pci_disabled __initdata;
+
+void __init orion5x_pci_disable(void)
+{
+	orion5x_pci_disabled = 1;
+}
+
 void __init orion5x_pci_set_cardbus_mode(void)
 {
 	orion5x_pci_cardbus_mode = 1;
@@ -553,7 +560,7 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
 	if (nr == 0) {
 		orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
 		ret = pcie_setup(sys);
-	} else if (nr == 1) {
+	} else if (nr == 1 && !orion5x_pci_disabled) {
 		orion5x_pci_set_bus_nr(sys->busnr);
 		ret = pci_setup(sys);
 	}
@@ -567,7 +574,7 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys
 
 	if (nr == 0) {
 		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
-	} else if (nr == 1) {
+	} else if (nr == 1 && !orion5x_pci_disabled) {
 		bus = pci_scan_bus(sys->busnr, &pci_ops, sys);
 	} else {
 		bus = NULL;
@@ -584,7 +591,7 @@ int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * PCIe endpoint?
 	 */
-	if (bus < orion5x_pci_local_bus_nr())
+	if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr())
 		return IRQ_ORION5X_PCIE0_INT;
 
 	return -1;
-- 
GitLab


From 35228e840acc70b49a2eab4eb308ca3d544efdcf Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Sat, 9 Aug 2008 18:13:33 +0300
Subject: [PATCH 305/869] [ARM] Orion: fix MAC detection on QNAP TS-209 and
 TS-409

Flash needs to be set up before we can try to read the MAC address
from there.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 arch/arm/mach-orion5x/ts209-setup.c | 8 ++++----
 arch/arm/mach-orion5x/ts409-setup.c | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index dd657163cd8..bcd4b2a10d6 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -287,6 +287,10 @@ static void __init qnap_ts209_init(void)
 	/*
 	 * Configure peripherals.
 	 */
+	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
+				   QNAP_TS209_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts209_nor_flash);
+
 	orion5x_ehci0_init();
 	orion5x_ehci1_init();
 	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
@@ -298,10 +302,6 @@ static void __init qnap_ts209_init(void)
 	orion5x_uart0_init();
 	orion5x_xor_init();
 
-	orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE,
-				   QNAP_TS209_NOR_BOOT_SIZE);
-	platform_device_register(&qnap_ts209_nor_flash);
-
 	platform_device_register(&qnap_ts209_button_device);
 
 	/* Get RTC IRQ and register the chip */
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index b27d2b76208..4bd8ed1d75e 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -278,6 +278,10 @@ static void __init qnap_ts409_init(void)
 	/*
 	 * Configure peripherals.
 	 */
+	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
+				   QNAP_TS409_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts409_nor_flash);
+
 	orion5x_ehci0_init();
 	qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
 				 qnap_ts409_partitions[5].offset,
@@ -286,10 +290,6 @@ static void __init qnap_ts409_init(void)
 	orion5x_i2c_init();
 	orion5x_uart0_init();
 
-	orion5x_setup_dev_boot_win(QNAP_TS409_NOR_BOOT_BASE,
-				   QNAP_TS409_NOR_BOOT_SIZE);
-	platform_device_register(&qnap_ts409_nor_flash);
-
 	platform_device_register(&qnap_ts409_button_device);
 
 	/* Get RTC IRQ and register the chip */
-- 
GitLab


From c0fe819baf86979a5801387ccd7d8df0dc2f34e2 Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Tue, 12 Aug 2008 12:50:14 +0300
Subject: [PATCH 306/869] [ARM] Orion: activate lm75 driver on DNS-323

The lm75 driver was recently converted to the new-style binding,
so now it can be loaded from the DNS-323 support code.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Tested-by: Tobias Poschwatta <tp@fonz.de>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 arch/arm/configs/orion5x_defconfig   | 2 +-
 arch/arm/mach-orion5x/dns323-setup.c | 6 +-----
 2 files changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 1464ffe7171..113a4557276 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -884,7 +884,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
+CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
 # CONFIG_SENSORS_LM80 is not set
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 1a1d84b80a6..b38c65ccfb1 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -245,12 +245,8 @@ static struct orion5x_mpp_mode dns323_mpp_modes[] __initdata = {
 static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("g760a", 0x3e),
-#if 0
-	/* this entry requires the new-style driver model lm75 driver,
-	 * for the meantime "insmod lm75.ko force_lm75=0,0x48" is needed */
 	}, {
-		I2C_BOARD_INFO("g751", 0x48),
-#endif
+		I2C_BOARD_INFO("lm75", 0x48),
 	}, {
 		I2C_BOARD_INFO("m41t80", 0x68),
 	},
-- 
GitLab


From e45772b2c0a011203b797d2b5f19fe314eacca0e Mon Sep 17 00:00:00 2001
From: Martin Michlmayr <tbm@cyrius.com>
Date: Wed, 13 Aug 2008 10:46:11 +0300
Subject: [PATCH 307/869] [ARM] Orion: register UART1 on QNAP TS-209 and TS-409

Register UART1 on QNAP TS-209 and TS-409 because the PIC controller
is connected to it.  This fixes a regression from 2.6.26.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 arch/arm/mach-orion5x/ts209-setup.c | 1 +
 arch/arm/mach-orion5x/ts409-setup.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index bcd4b2a10d6..9d689051419 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -300,6 +300,7 @@ static void __init qnap_ts209_init(void)
 	orion5x_i2c_init();
 	orion5x_sata_init(&qnap_ts209_sata_data);
 	orion5x_uart0_init();
+	orion5x_uart1_init();
 	orion5x_xor_init();
 
 	platform_device_register(&qnap_ts209_button_device);
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 4bd8ed1d75e..d85588ac7ef 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -289,6 +289,7 @@ static void __init qnap_ts409_init(void)
 	orion5x_eth_init(&qnap_tsx09_eth_data);
 	orion5x_i2c_init();
 	orion5x_uart0_init();
+	orion5x_uart1_init();
 
 	platform_device_register(&qnap_ts409_button_device);
 
-- 
GitLab


From 38cc1c3df77c1bb739a4766788eb9fa49f16ffdf Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Thu, 21 Aug 2008 20:24:24 -0700
Subject: [PATCH 308/869] x86: work around MTRR mask setting

Joshua Hoblitt reported that only 3 GB of his 16 GB of RAM is
usable. Booting with mtrr_show showed us the BIOS-initialized
MTRR settings - which are all wrong.

So the root cause is that the BIOS has not set the mask correctly:

>               [    0.429971]  MSR00000200: 00000000d0000000
>               [    0.433305]  MSR00000201: 0000000ff0000800
> should be ==> [    0.433305]  MSR00000201: 0000003ff0000800
>
>               [    0.436638]  MSR00000202: 00000000e0000000
>               [    0.439971]  MSR00000203: 0000000fe0000800
> should be ==> [    0.439971]  MSR00000203: 0000003fe0000800
>
>               [    0.443304]  MSR00000204: 0000000000000006
>               [    0.446637]  MSR00000205: 0000000c00000800
> should be ==> [    0.446637]  MSR00000205: 0000003c00000800
>
>               [    0.449970]  MSR00000206: 0000000400000006
>               [    0.453303]  MSR00000207: 0000000fe0000800
> should be ==> [    0.453303]  MSR00000207: 0000003fe0000800
>
>               [    0.456636]  MSR00000208: 0000000420000006
>               [    0.459970]  MSR00000209: 0000000ff0000800
> should be ==> [    0.459970]  MSR00000209: 0000003ff0000800

So detect this borkage and add the prefix 111.

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/generic.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 509bd3d9eac..43102e03e2d 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -379,6 +379,7 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 			     unsigned long *size, mtrr_type *type)
 {
 	unsigned int mask_lo, mask_hi, base_lo, base_hi;
+	unsigned int tmp, hi;
 
 	rdmsr(MTRRphysMask_MSR(reg), mask_lo, mask_hi);
 	if ((mask_lo & 0x800) == 0) {
@@ -392,8 +393,18 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 	rdmsr(MTRRphysBase_MSR(reg), base_lo, base_hi);
 
 	/* Work out the shifted address mask. */
-	mask_lo = size_or_mask | mask_hi << (32 - PAGE_SHIFT)
-	    | mask_lo >> PAGE_SHIFT;
+	tmp = mask_hi << (32 - PAGE_SHIFT) | mask_lo >> PAGE_SHIFT;
+	mask_lo = size_or_mask | tmp;
+	/* Expand tmp with high bits to all 1s*/
+	hi = fls(tmp);
+	if (hi > 0) {
+		tmp |= ~((1<<(hi - 1)) - 1);
+
+		if (tmp != mask_lo) {
+			WARN_ON("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
+			mask_lo = tmp;
+		}
+	}
 
 	/* This works correctly if size is a power of two, i.e. a
 	   contiguous range. */
-- 
GitLab


From 8ae3a5a8dff2c92bd1087bb97c4a3bb61174303e Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Thu, 21 Aug 2008 14:27:22 +0100
Subject: [PATCH 309/869] x86: fix 1:1 mapping init on 64-bit (memory hotplug
 case)

While I don't have a hotplug capable system at hand, I think two issues need
fixing:

- pud_phys (in kernel_physical_ampping_init()) would remain uninitialized in
  the after_bootmem case

- the locking done just around phys_pmd_{init,update}() would leave out pgd
  updates, and it was needlessly covering code portions that do allocations
  (perhaps using a more friendly gfp value in alloc_low_page() would then be
  possible)

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_64.c | 32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index a87ea0e4b3d..8f487705c3e 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -336,9 +336,12 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 		}
 
 		if (pmd_val(*pmd)) {
-			if (!pmd_large(*pmd))
+			if (!pmd_large(*pmd)) {
+				spin_lock(&init_mm.page_table_lock);
 				last_map_addr = phys_pte_update(pmd, address,
-								 end);
+								end);
+				spin_unlock(&init_mm.page_table_lock);
+			}
 			/* Count entries we're using from level2_ident_pgt */
 			if (start == 0)
 				pages++;
@@ -347,8 +350,10 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 
 		if (page_size_mask & (1<<PG_LEVEL_2M)) {
 			pages++;
+			spin_lock(&init_mm.page_table_lock);
 			set_pte((pte_t *)pmd,
 				pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+			spin_unlock(&init_mm.page_table_lock);
 			last_map_addr = (address & PMD_MASK) + PMD_SIZE;
 			continue;
 		}
@@ -357,7 +362,9 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end,
 		last_map_addr = phys_pte_init(pte, address, end);
 		unmap_low_page(pte);
 
+		spin_lock(&init_mm.page_table_lock);
 		pmd_populate_kernel(&init_mm, pmd, __va(pte_phys));
+		spin_unlock(&init_mm.page_table_lock);
 	}
 	update_page_count(PG_LEVEL_2M, pages);
 	return last_map_addr;
@@ -370,9 +377,7 @@ phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end,
 	pmd_t *pmd = pmd_offset(pud, 0);
 	unsigned long last_map_addr;
 
-	spin_lock(&init_mm.page_table_lock);
 	last_map_addr = phys_pmd_init(pmd, address, end, page_size_mask);
-	spin_unlock(&init_mm.page_table_lock);
 	__flush_tlb_all();
 	return last_map_addr;
 }
@@ -408,20 +413,21 @@ phys_pud_init(pud_t *pud_page, unsigned long addr, unsigned long end,
 
 		if (page_size_mask & (1<<PG_LEVEL_1G)) {
 			pages++;
+			spin_lock(&init_mm.page_table_lock);
 			set_pte((pte_t *)pud,
 				pfn_pte(addr >> PAGE_SHIFT, PAGE_KERNEL_LARGE));
+			spin_unlock(&init_mm.page_table_lock);
 			last_map_addr = (addr & PUD_MASK) + PUD_SIZE;
 			continue;
 		}
 
 		pmd = alloc_low_page(&pmd_phys);
-
-		spin_lock(&init_mm.page_table_lock);
 		last_map_addr = phys_pmd_init(pmd, addr, end, page_size_mask);
 		unmap_low_page(pmd);
+
+		spin_lock(&init_mm.page_table_lock);
 		pud_populate(&init_mm, pud, __va(pmd_phys));
 		spin_unlock(&init_mm.page_table_lock);
-
 	}
 	__flush_tlb_all();
 	update_page_count(PG_LEVEL_1G, pages);
@@ -513,16 +519,14 @@ static unsigned long __init kernel_physical_mapping_init(unsigned long start,
 			continue;
 		}
 
-		if (after_bootmem)
-			pud = pud_offset(pgd, start & PGDIR_MASK);
-		else
-			pud = alloc_low_page(&pud_phys);
-
+		pud = alloc_low_page(&pud_phys);
 		last_map_addr = phys_pud_init(pud, __pa(start), __pa(next),
 						 page_size_mask);
 		unmap_low_page(pud);
-		pgd_populate(&init_mm, pgd_offset_k(start),
-			     __va(pud_phys));
+
+		spin_lock(&init_mm.page_table_lock);
+		pgd_populate(&init_mm, pgd, __va(pud_phys));
+		spin_unlock(&init_mm.page_table_lock);
 	}
 
 	return last_map_addr;
-- 
GitLab


From 9482ac6e34dd1890a9a956d460a135bf992cb54a Mon Sep 17 00:00:00 2001
From: Jan Beulich <jbeulich@novell.com>
Date: Thu, 21 Aug 2008 14:28:42 +0100
Subject: [PATCH 310/869] x86: fix two modpost warnings in mm/init_64.c

early_io{re,un}map() are __init and hence can't be called from __meminit
functions.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/init_64.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 8f487705c3e..d3746efb060 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -241,7 +241,7 @@ static unsigned long __initdata table_start;
 static unsigned long __meminitdata table_end;
 static unsigned long __meminitdata table_top;
 
-static __meminit void *alloc_low_page(unsigned long *phys)
+static __ref void *alloc_low_page(unsigned long *phys)
 {
 	unsigned long pfn = table_end++;
 	void *adr;
@@ -262,7 +262,7 @@ static __meminit void *alloc_low_page(unsigned long *phys)
 	return adr;
 }
 
-static __meminit void unmap_low_page(void *adr)
+static __ref void unmap_low_page(void *adr)
 {
 	if (after_bootmem)
 		return;
-- 
GitLab


From 3a6ddd5f18405ca92e004416af8ed44b9c9783d7 Mon Sep 17 00:00:00 2001
From: Alok Kataria <akataria@vmware.com>
Date: Thu, 21 Aug 2008 11:32:26 -0700
Subject: [PATCH 311/869] x86: fix VMI for early params

while fixing a different bug i moved the call to vmi_init before
early params could be parsed.

This broke the vmi specific commandline parameters.
Fix that, by moving vmi initialization after kernel has got a chance to
parse early parameters.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index a4656adab53..362d4e7f2d3 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -604,14 +604,6 @@ void __init setup_arch(char **cmdline_p)
 	early_cpu_init();
 	early_ioremap_init();
 
-#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
-	/*
-	 * Must be before kernel pagetables are setup
-	 * or fixmap area is touched.
-	 */
-	vmi_init();
-#endif
-
 	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
 	screen_info = boot_params.screen_info;
 	edid_info = boot_params.edid_info;
@@ -678,6 +670,14 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+#if defined(CONFIG_VMI) && defined(CONFIG_X86_32)
+	/*
+	 * Must be before kernel pagetables are setup
+	 * or fixmap area is touched.
+	 */
+	vmi_init();
+#endif
+
 	/* after early param, so could get panic from serial */
 	reserve_early_setup_data();
 
-- 
GitLab


From 05944bdf6fadb5394710269df6770dde447b23ca Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 13 Aug 2008 20:19:09 +0900
Subject: [PATCH 312/869] libata: implement no[hs]rst force params

Implement force params nohrst, nosrst and norst.  This is to work
around reset related problems and ease debugging.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 Documentation/kernel-parameters.txt |  3 ++
 drivers/ata/libata-core.c           | 46 +++++++++++++++++++----------
 drivers/ata/libata-eh.c             |  4 +++
 include/linux/libata.h              |  1 +
 4 files changed, 38 insertions(+), 16 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a8976467a98..1150444a21a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1074,6 +1074,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 			* [no]ncq: Turn on or off NCQ.
 
+			* nohrst, nosrst, norst: suppress hard, soft
+                          and both resets.
+
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5ba96c5052c..dddcb9fde35 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -104,6 +104,7 @@ struct ata_force_param {
 	unsigned long	xfer_mask;
 	unsigned int	horkage_on;
 	unsigned int	horkage_off;
+	unsigned int	lflags;
 };
 
 struct ata_force_ent {
@@ -196,22 +197,23 @@ void ata_force_cbl(struct ata_port *ap)
 }
 
 /**
- *	ata_force_spd_limit - force SATA spd limit according to libata.force
+ *	ata_force_link_limits - force link limits according to libata.force
  *	@link: ATA link of interest
  *
- *	Force SATA spd limit according to libata.force and whine about
- *	it.  When only the port part is specified (e.g. 1:), the limit
- *	applies to all links connected to both the host link and all
- *	fan-out ports connected via PMP.  If the device part is
- *	specified as 0 (e.g. 1.00:), it specifies the first fan-out
- *	link not the host link.  Device number 15 always points to the
- *	host link whether PMP is attached or not.
+ *	Force link flags and SATA spd limit according to libata.force
+ *	and whine about it.  When only the port part is specified
+ *	(e.g. 1:), the limit applies to all links connected to both
+ *	the host link and all fan-out ports connected via PMP.  If the
+ *	device part is specified as 0 (e.g. 1.00:), it specifies the
+ *	first fan-out link not the host link.  Device number 15 always
+ *	points to the host link whether PMP is attached or not.
  *
  *	LOCKING:
  *	EH context.
  */
-static void ata_force_spd_limit(struct ata_link *link)
+static void ata_force_link_limits(struct ata_link *link)
 {
+	bool did_spd = false;
 	int linkno, i;
 
 	if (ata_is_host_link(link))
@@ -228,13 +230,22 @@ static void ata_force_spd_limit(struct ata_link *link)
 		if (fe->device != -1 && fe->device != linkno)
 			continue;
 
-		if (!fe->param.spd_limit)
-			continue;
+		/* only honor the first spd limit */
+		if (!did_spd && fe->param.spd_limit) {
+			link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
+			ata_link_printk(link, KERN_NOTICE,
+					"FORCE: PHY spd limit set to %s\n",
+					fe->param.name);
+			did_spd = true;
+		}
 
-		link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
-		ata_link_printk(link, KERN_NOTICE,
-			"FORCE: PHY spd limit set to %s\n", fe->param.name);
-		return;
+		/* let lflags stack */
+		if (fe->param.lflags) {
+			link->flags |= fe->param.lflags;
+			ata_link_printk(link, KERN_NOTICE,
+					"FORCE: link flag 0x%x forced -> 0x%x\n",
+					fe->param.lflags, link->flags);
+		}
 	}
 }
 
@@ -5200,7 +5211,7 @@ int sata_link_init_spd(struct ata_link *link)
 	if (spd)
 		link->hw_sata_spd_limit &= (1 << spd) - 1;
 
-	ata_force_spd_limit(link);
+	ata_force_link_limits(link);
 
 	link->sata_spd_limit = link->hw_sata_spd_limit;
 
@@ -5991,6 +6002,9 @@ static int __init ata_parse_force_one(char **cur,
 		{ "udma133",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
 		{ "udma/133",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
 		{ "udma7",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 7) },
+		{ "nohrst",	.lflags		= ATA_LFLAG_NO_HRST },
+		{ "nosrst",	.lflags		= ATA_LFLAG_NO_SRST },
+		{ "norst",	.lflags		= ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
 	};
 	char *start = *cur, *p = *cur;
 	char *id, *val, *endp;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 58bdc538d22..a570ca47e23 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2210,6 +2210,10 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	 */
 	while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX)
 		max_tries++;
+	if (link->flags & ATA_LFLAG_NO_HRST)
+		hardreset = NULL;
+	if (link->flags & ATA_LFLAG_NO_SRST)
+		softreset = NULL;
 
 	now = jiffies;
 	deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 06b80337303..5340d4c83fd 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -163,6 +163,7 @@ enum {
 	ATA_DEV_NONE		= 9,	/* no device */
 
 	/* struct ata_link flags */
+	ATA_LFLAG_NO_HRST	= (1 << 1), /* avoid hardreset */
 	ATA_LFLAG_NO_SRST	= (1 << 2), /* avoid softreset */
 	ATA_LFLAG_ASSUME_ATA	= (1 << 3), /* assume ATA class */
 	ATA_LFLAG_ASSUME_SEMB	= (1 << 4), /* assume SEMB class */
-- 
GitLab


From 4bdee6c5103696a2729d3db2f235d202191788e4 Mon Sep 17 00:00:00 2001
From: Tejun Heo <htejun@gmail.com>
Date: Wed, 13 Aug 2008 20:24:16 +0900
Subject: [PATCH 313/869] sata_mv: don't issue two DMA commands concurrently

sata_mv allowed issuing two DMA commands concurrently which the
hardware allows.  Unfortunately, libata core layer isn't ready for
this yet and spews ugly warning message and malfunctions on this.
Don't allow concurrent DMA commands for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 34 ++++++++++------------------------
 1 file changed, 10 insertions(+), 24 deletions(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index ad169ffbc4c..80c655f85bc 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1134,30 +1134,16 @@ static int mv_qc_defer(struct ata_queued_cmd *qc)
 	if (ap->nr_active_links == 0)
 		return 0;
 
-	if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
-		/*
-		 * The port is operating in host queuing mode (EDMA).
-		 * It can accomodate a new qc if the qc protocol
-		 * is compatible with the current host queue mode.
-		 */
-		if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
-			/*
-			 * The host queue (EDMA) is in NCQ mode.
-			 * If the new qc is also an NCQ command,
-			 * then allow the new qc.
-			 */
-			if (qc->tf.protocol == ATA_PROT_NCQ)
-				return 0;
-		} else {
-			/*
-			 * The host queue (EDMA) is in non-NCQ, DMA mode.
-			 * If the new qc is also a non-NCQ, DMA command,
-			 * then allow the new qc.
-			 */
-			if (qc->tf.protocol == ATA_PROT_DMA)
-				return 0;
-		}
-	}
+	/*
+	 * The port is operating in host queuing mode (EDMA) with NCQ
+	 * enabled, allow multiple NCQ commands.  EDMA also allows
+	 * queueing multiple DMA commands but libata core currently
+	 * doesn't allow it.
+	 */
+	if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
+	    (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
+		return 0;
+
 	return ATA_DEFER_PORT;
 }
 
-- 
GitLab


From adcb5308dda3d2749342685f23953e13ba74ff68 Mon Sep 17 00:00:00 2001
From: Seth Heasley <seth.heasley@intel.com>
Date: Mon, 11 Aug 2008 17:03:09 -0700
Subject: [PATCH 314/869] ahci: RAID mode SATA patch for Intel Ibex Peak
 DeviceIDs

Resend with proper whitespace.

This patch adds the Intel Ibex Peak (PCH) SATA RAID Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ahci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index ef3e5522e1a..a0e85a78778 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -486,6 +486,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
 	{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+	{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-- 
GitLab


From c6c6a1afefe51d488c050464f261d4711bea9a37 Mon Sep 17 00:00:00 2001
From: Seth Heasley <seth.heasley@intel.com>
Date: Mon, 11 Aug 2008 17:03:18 -0700
Subject: [PATCH 315/869] ata_piix: IDE Mode SATA patch for Intel Ibex Peak
 DeviceIDs

This patch adds the Intel Ibex Peak (PCH) IDE mode SATA Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ata_piix.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index c294121fd69..b1d08a8f500 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -275,6 +275,14 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH10) */
 	{ 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 
 	{ }	/* terminate list */
 };
-- 
GitLab


From eb3a55a9f43f0f8e770c2abf70e65bdda2d5ff1e Mon Sep 17 00:00:00 2001
From: Saeed Bishara <saeed@marvell.com>
Date: Mon, 4 Aug 2008 00:52:55 -1100
Subject: [PATCH 316/869] sata_mv: add the Gen IIE flag to the SoC devices.

The SoC sata port is based on the 7042/6042 devices (Gen IIE). This patch
will fix various issues when working with PMP and/or NCQ.

Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 80c655f85bc..13c1d2af18a 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -3022,7 +3022,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 		break;
 	case chip_soc:
 		hpriv->ops = &mv_soc_ops;
-		hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
+		hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
+			MV_HP_ERRATA_60X1C0;
 		break;
 
 	default:
-- 
GitLab


From a674050e068a2919908730279f0b731ae6d2e005 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 31 Jul 2008 16:07:04 +0900
Subject: [PATCH 317/869] libata: fix EH action overwriting in ata_eh_reset()

ehc->i.action got accidentally overwritten to ATA_EH_HARD/SOFTRESET in
ata_eh_reset().  The original intention was to clear reset action
which wasn't selected.  This can cause unexpected behavior when other
EH actions are scheduled together with reset.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-eh.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index a570ca47e23..c98909ba0b1 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2251,10 +2251,10 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ehc->i.action &= ~ATA_EH_RESET;
 	if (hardreset) {
 		reset = hardreset;
-		ehc->i.action = ATA_EH_HARDRESET;
+		ehc->i.action |= ATA_EH_HARDRESET;
 	} else if (softreset) {
 		reset = softreset;
-		ehc->i.action = ATA_EH_SOFTRESET;
+		ehc->i.action |= ATA_EH_SOFTRESET;
 	}
 
 	if (prereset) {
-- 
GitLab


From 5dbfc9cb59d4ad75199949d7dd8a8c6d7bc518df Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 31 Jul 2008 16:08:02 +0900
Subject: [PATCH 318/869] libata: always do follow-up SRST if hardreset
 returned -EAGAIN

As an optimization, follow-up SRST used to be skipped if
classification wasn't requested even when hardreset requested it via
-EAGAIN.  However, some hardresets can't wait for device readiness and
skipping SRST can cause timeout or other failures during revalidation.
Always perform follow-up SRST if hardreset returns -EAGAIN.  This
makes reset paths more predictable and thus less error-prone.

While at it, move hardreset error checking such that it's done right
after hardreset is finished.  This simplifies followup SRST condition
check a bit and makes the reset path easier to modify.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-eh.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index c98909ba0b1..d4dad47b8f1 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2171,18 +2171,12 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
 }
 
 static int ata_eh_followup_srst_needed(struct ata_link *link,
-				       int rc, int classify,
-				       const unsigned int *classes)
+				       int rc, const unsigned int *classes)
 {
 	if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
 		return 0;
-	if (rc == -EAGAIN) {
-		if (classify)
-			return 1;
-		rc = 0;
-	}
-	if (rc != 0)
-		return 0;
+	if (rc == -EAGAIN)
+		return 1;
 	if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
 		return 1;
 	return 0;
@@ -2309,9 +2303,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
 
 		rc = ata_do_reset(link, reset, classes, deadline);
+		if (rc && rc != -EAGAIN)
+			goto fail;
 
 		if (reset == hardreset &&
-		    ata_eh_followup_srst_needed(link, rc, classify, classes)) {
+		    ata_eh_followup_srst_needed(link, rc, classes)) {
 			/* okay, let's do follow-up softreset */
 			reset = softreset;
 
@@ -2326,10 +2322,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
 			rc = ata_do_reset(link, reset, classes, deadline);
 		}
-
-		/* -EAGAIN can happen if we skipped followup SRST */
-		if (rc && rc != -EAGAIN)
-			goto fail;
 	} else {
 		if (verbose)
 			ata_link_printk(link, KERN_INFO, "no reset method "
-- 
GitLab


From da0e21d3fa2340114fe24821718a1b57123e4664 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 31 Jul 2008 16:08:38 +0900
Subject: [PATCH 319/869] libata: use ata_link_printk() when printing SError

SError belongs to link not port.  Use ata_link_printk() to print it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-eh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index d4dad47b8f1..c1db2f234d2 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2040,7 +2040,7 @@ static void ata_eh_link_report(struct ata_link *link)
 	}
 
 	if (ehc->i.serror)
-		ata_port_printk(ap, KERN_ERR,
+		ata_link_printk(link, KERN_ERR,
 		  "SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
 		  ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
 		  ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
-- 
GitLab


From d127ea7b8643a93d14d1f3c542974407f14d3663 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 31 Jul 2008 16:09:34 +0900
Subject: [PATCH 320/869] libata: restore SControl on detach

Save SControl during probing and restore it on detach.  This prevents
adjustments made by libata drivers to seep into the next driver which
gets attached (be it a libata one or not).

It's not clear whether SControl also needs to be restored on suspend.
The next system to have control (ACPI or kexec'd kernel) would
probably like to see the original SControl value but there's no
guarantee that a link is gonna keep working after SControl is adjusted
without a reset and adding a reset and modified recovery cycle soley
for this is an overkill.  For now, do it only for detach.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-core.c | 10 +++++-----
 include/linux/libata.h    |  1 +
 2 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index dddcb9fde35..5f8f57a818f 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5199,15 +5199,14 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
  */
 int sata_link_init_spd(struct ata_link *link)
 {
-	u32 scontrol;
 	u8 spd;
 	int rc;
 
-	rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+	rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
 	if (rc)
 		return rc;
 
-	spd = (scontrol >> 4) & 0xf;
+	spd = (link->saved_scontrol >> 4) & 0xf;
 	if (spd)
 		link->hw_sata_spd_limit &= (1 << spd) - 1;
 
@@ -5794,9 +5793,10 @@ static void ata_port_detach(struct ata_port *ap)
 	ata_port_wait_eh(ap);
 
 	/* EH is now guaranteed to see UNLOADING - EH context belongs
-	 * to us.  Disable all existing devices.
+	 * to us.  Restore SControl and disable all existing devices.
 	 */
-	ata_port_for_each_link(link, ap) {
+	__ata_port_for_each_link(link, ap) {
+		sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
 		ata_link_for_each_dev(dev, link)
 			ata_dev_disable(dev);
 	}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5340d4c83fd..80233fdc159 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -647,6 +647,7 @@ struct ata_link {
 
 	unsigned int		flags;		/* ATA_LFLAG_xxx */
 
+	u32			saved_scontrol;	/* SControl on probe */
 	unsigned int		hw_sata_spd_limit;
 	unsigned int		sata_spd_limit;
 	unsigned int		sata_spd;	/* current SATA PHY speed */
-- 
GitLab


From ff04715bd5171d6d5c4ddff40c7bdc8d2dc90f7d Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Thu, 31 Jul 2008 18:02:35 +0900
Subject: [PATCH 321/869] pata_via: clean up recent tf_load changes

Commit bfce5e0179ad059035df28558724ff60af708e09 implemented custom
tf_load for pata_via.  This patch cleans it up a bit.

* Instead of duplicating whole body, copy tf and set ATA_TFLAG_DEVICE
  when necessary.

* Rename via_ata_tf_load() to via_tf_load().

* No need to set .tf_load in via_port_ops_noirq as it inherits from
  via_port_ops.

* Clean up indentation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Joseph Chan <JosephChan@via.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_via.c | 59 ++++++++----------------------------------
 1 file changed, 11 insertions(+), 48 deletions(-)

diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 57d951b11f2..8fdb2ce7321 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -324,62 +324,26 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	via_ata_sff_tf_load - send taskfile registers to host controller
+ *	via_tf_load - send taskfile registers to host controller
  *	@ap: Port to which output is sent
  *	@tf: ATA taskfile register set
  *
  *	Outputs ATA taskfile to standard ATA host controller.
  *
  *	Note: This is to fix the internal bug of via chipsets, which
- *  will reset the device register after changing the IEN bit on
- *  ctl register
+ *	will reset the device register after changing the IEN bit on
+ *	ctl register
  */
-static void via_ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
-	struct ata_ioports *ioaddr = &ap->ioaddr;
-	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
-	if (tf->ctl != ap->last_ctl) {
-		iowrite8(tf->ctl, ioaddr->ctl_addr);
-		iowrite8(tf->device, ioaddr->device_addr);
-		ap->last_ctl = tf->ctl;
-		ata_wait_idle(ap);
-	}
-
-	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
-		iowrite8(tf->hob_feature, ioaddr->feature_addr);
-		iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
-		iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
-		iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
-		iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
-		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
-			tf->hob_feature,
-			tf->hob_nsect,
-			tf->hob_lbal,
-			tf->hob_lbam,
-			tf->hob_lbah);
-	}
+	struct ata_taskfile tmp_tf;
 
-	if (is_addr) {
-		iowrite8(tf->feature, ioaddr->feature_addr);
-		iowrite8(tf->nsect, ioaddr->nsect_addr);
-		iowrite8(tf->lbal, ioaddr->lbal_addr);
-		iowrite8(tf->lbam, ioaddr->lbam_addr);
-		iowrite8(tf->lbah, ioaddr->lbah_addr);
-		VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
-			tf->feature,
-			tf->nsect,
-			tf->lbal,
-			tf->lbam,
-			tf->lbah);
+	if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
+		tmp_tf = *tf;
+		tmp_tf.flags |= ATA_TFLAG_DEVICE;
+		tf = &tmp_tf;
 	}
-
-	if (tf->flags & ATA_TFLAG_DEVICE) {
-		iowrite8(tf->device, ioaddr->device_addr);
-		VPRINTK("device 0x%X\n", tf->device);
-	}
-
-	ata_wait_idle(ap);
+	ata_sff_tf_load(ap, tf);
 }
 
 static struct scsi_host_template via_sht = {
@@ -392,13 +356,12 @@ static struct ata_port_operations via_port_ops = {
 	.set_piomode	= via_set_piomode,
 	.set_dmamode	= via_set_dmamode,
 	.prereset	= via_pre_reset,
-	.sff_tf_load = via_ata_tf_load,
+	.sff_tf_load	= via_tf_load,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
 	.inherits	= &via_port_ops,
 	.sff_data_xfer	= ata_sff_data_xfer_noirq,
-	.sff_tf_load = via_ata_tf_load,
 };
 
 /**
-- 
GitLab


From 20e2de4a505aa02131a95665e8920eb053fce686 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 1 Aug 2008 12:51:43 +0900
Subject: [PATCH 322/869] ahci: sis controllers actually can do PMP

SIS controllers were blacklisted for PMP as enabling it made device
detection fail whether the device was PMP or not - the natural
conclusion was the controller chokes on SRST w/ pmp==15.  However, it
turned out that the controller just didn't like issuing SRST after
hardreset w/o clearing SError first.  Interestingly, the SRST itself
succeeds but the following commands fail.

If SError is cleared between hardreset and SRST, which is the default
behavior now, everything works fine and SIS controllers work with PMPs
happily.

Remove PMP blacklisting for SIS AHCIs.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Piter PUNK <piterpunk@slackware.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ahci.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a0e85a78778..c729e6988bb 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -577,9 +577,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci },		/* MCP7B */
 
 	/* SiS */
-	{ PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp },		/* SiS 966 */
-	{ PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp },		/* SiS 968 */
-	{ PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp },		/* SiS 968 */
+	{ PCI_VDEVICE(SI, 0x1184), board_ahci },		/* SiS 966 */
+	{ PCI_VDEVICE(SI, 0x1185), board_ahci },		/* SiS 968 */
+	{ PCI_VDEVICE(SI, 0x0186), board_ahci },		/* SiS 968 */
 
 	/* Marvell */
 	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
-- 
GitLab


From b15b3ebae102f89c25ccbcae0b2099af312f2e82 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Fri, 1 Aug 2008 09:18:34 +0100
Subject: [PATCH 323/869] libata: Fix a large collection of DMA mode mismatches
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Dave Müller sent a diff for the pata_oldpiix that highlighted a problem
where a lot of the ATA drivers assume dma_mode == 0 means "no DMA" while
the core code uses 0xFF.

This turns out to have other consequences such as code doing >= XFER_UDMA_0
also catching 0xFF as UDMAlots. Fortunately it doesn't generally affect
set_dma_mode, although some drivers call back into their own set mode code
from other points.

Having been through the drivers I've added helpers for using_udma/using_mwdma
dma_enabled so that people don't open code ranges that may change (eg if UDMA8
appears somewhere)

Thanks to David for the initial bits
[and added fix for pata_oldpiix from and signed-off-by Dave Mueller
 <dave.mueller@gmx.ch>  -jg]

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-core.c  |  4 ++--
 drivers/ata/pata_acpi.c    |  2 +-
 drivers/ata/pata_atiixp.c  |  2 +-
 drivers/ata/pata_cs5530.c  |  6 +++---
 drivers/ata/pata_oldpiix.c |  2 +-
 drivers/ata/pata_sc1200.c  |  6 +++---
 include/linux/libata.h     | 22 ++++++++++++++++++++++
 7 files changed, 33 insertions(+), 11 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5f8f57a818f..79e3a8e7a84 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3288,7 +3288,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 		dev->dma_mode = ata_xfer_mask2mode(dma_mask);
 
 		found = 1;
-		if (dev->dma_mode != 0xff)
+		if (ata_dma_enabled(dev))
 			used_dma = 1;
 	}
 	if (!found)
@@ -3313,7 +3313,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 
 	/* step 3: set host DMA timings */
 	ata_link_for_each_dev(dev, link) {
-		if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
+		if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev))
 			continue;
 
 		dev->xfer_mode = dev->dma_mode;
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index fbe60571155..eb919c16a03 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -181,7 +181,7 @@ static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
 
 	if (adev != acpi->last) {
 		pacpi_set_piomode(ap, adev);
-		if (adev->dma_mode)
+		if (ata_dma_enabled(adev))
 			pacpi_set_dmamode(ap, adev);
 		acpi->last = adev;
 	}
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index d7de7baf58a..e8a0d99d735 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -183,7 +183,7 @@ static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
 	u16 tmp16;
 
 	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
-	if (adev->dma_mode >= XFER_UDMA_0)
+	if (ata_using_udma(adev))
 		tmp16 |= (1 << dn);
 	else
 		tmp16 &= ~(1 << dn);
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 744beebaaf4..0c4b271a9d5 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -149,10 +149,10 @@ static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
 	struct ata_device *prev = ap->private_data;
 
 	/* See if the DMA settings could be wrong */
-	if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+	if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
 		/* Maybe, but do the channels match MWDMA/UDMA ? */
-		if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
-		    (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+		if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+		    (ata_using_udma(prev) && !ata_using_udma(adev)))
 		    	/* Switch the mode bits */
 		    	cs5530_set_dmamode(ap, adev);
 	}
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index e678af383d1..df64f244300 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -198,7 +198,7 @@ static unsigned int oldpiix_qc_issue(struct ata_queued_cmd *qc)
 
 	if (adev != ap->private_data) {
 		oldpiix_set_piomode(ap, adev);
-		if (adev->dma_mode)
+		if (ata_dma_enabled(adev))
 			oldpiix_set_dmamode(ap, adev);
 	}
 	return ata_sff_qc_issue(qc);
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index cbab397e3db..0278fd2b8fb 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -167,10 +167,10 @@ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
 	struct ata_device *prev = ap->private_data;
 
 	/* See if the DMA settings could be wrong */
-	if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+	if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
 		/* Maybe, but do the channels match MWDMA/UDMA ? */
-		if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
-		    (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+		if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+		    (ata_using_udma(prev) && !ata_using_udma(adev)))
 		    	/* Switch the mode bits */
 		    	sc1200_set_dmamode(ap, adev);
 	}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 80233fdc159..225bfc5bd9e 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1429,6 +1429,28 @@ static inline unsigned long ata_deadline(unsigned long from_jiffies,
 	return from_jiffies + msecs_to_jiffies(timeout_msecs);
 }
 
+/* Don't open code these in drivers as there are traps. Firstly the range may
+   change in future hardware and specs, secondly 0xFF means 'no DMA' but is
+   > UDMA_0. Dyma ddreigiau */
+
+static inline int ata_using_mwdma(struct ata_device *adev)
+{
+	if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4)
+		return 1;
+	return 0;
+}
+
+static inline int ata_using_udma(struct ata_device *adev)
+{
+	if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7)
+		return 1;
+	return 0;
+}
+
+static inline int ata_dma_enabled(struct ata_device *adev)
+{
+	return (adev->dma_mode == 0xFF ? 0 : 1);
+}
 
 /**************************************************************************
  * PMP - drivers/ata/libata-pmp.c
-- 
GitLab


From 4ef281853474389fea952e9e59650e599ecf2d62 Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Fri, 22 Aug 2008 02:33:23 -0400
Subject: [PATCH 324/869] [libata] pata_it821x: fix warning

Reported by Andrew Morton:
drivers/ata/pata_it821x.c: In function 'it821x_port_start':
drivers/ata/pata_it821x.c:609: warning: 'mtype' may be used uninitialized in
this function

Pretty horrid fix, but so's a warning..

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_it821x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 27843c70eb9..0221c9a4676 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -606,7 +606,7 @@ static void it821x_display_disk(int n, u8 *buf)
 {
 	unsigned char id[41];
 	int mode = 0;
-	char *mtype;
+	char *mtype = "";
 	char mbuf[8];
 	char *cbl = "(40 wire cable)";
 
-- 
GitLab


From f6e0b239a2657ea8cb67f0d83d0bfdbfd19a481b Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Fri, 22 Aug 2008 03:24:05 -0700
Subject: [PATCH 325/869] pkt_sched: Fix qdisc list locking

Since some qdiscs call qdisc_tree_decrease_qlen() (so qdisc_lookup())
without rtnl_lock(), adding and deleting from a qdisc list needs
additional locking. This patch adds global spinlock qdisc_list_lock
and wrapper functions for modifying the list. It is considered as a
temporary solution until hfsc_dequeue(), netem_dequeue() and
tbf_dequeue() (or qdisc_tree_decrease_qlen()) are redone.

With feedback from Herbert Xu and David S. Miller.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/pkt_sched.h |  1 +
 net/sched/sch_api.c     | 44 ++++++++++++++++++++++++++++++++++++-----
 net/sched/sch_generic.c |  5 ++---
 3 files changed, 42 insertions(+), 8 deletions(-)

diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index 853fe83d9f3..b786a5b0925 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -78,6 +78,7 @@ extern struct Qdisc *fifo_create_dflt(struct Qdisc *sch, struct Qdisc_ops *ops,
 
 extern int register_qdisc(struct Qdisc_ops *qops);
 extern int unregister_qdisc(struct Qdisc_ops *qops);
+extern void qdisc_list_del(struct Qdisc *q);
 extern struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle);
 extern struct Qdisc *qdisc_lookup_class(struct net_device *dev, u32 handle);
 extern struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r,
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 45f442d7de4..e7fb9e0d21b 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -199,19 +199,53 @@ struct Qdisc *qdisc_match_from_root(struct Qdisc *root, u32 handle)
 	return NULL;
 }
 
+/*
+ * This lock is needed until some qdiscs stop calling qdisc_tree_decrease_qlen()
+ * without rtnl_lock(); currently hfsc_dequeue(), netem_dequeue(), tbf_dequeue()
+ */
+static DEFINE_SPINLOCK(qdisc_list_lock);
+
+static void qdisc_list_add(struct Qdisc *q)
+{
+	if ((q->parent != TC_H_ROOT) && !(q->flags & TCQ_F_INGRESS)) {
+		spin_lock_bh(&qdisc_list_lock);
+		list_add_tail(&q->list, &qdisc_root_sleeping(q)->list);
+		spin_unlock_bh(&qdisc_list_lock);
+	}
+}
+
+void qdisc_list_del(struct Qdisc *q)
+{
+	if ((q->parent != TC_H_ROOT) && !(q->flags & TCQ_F_INGRESS)) {
+		spin_lock_bh(&qdisc_list_lock);
+		list_del(&q->list);
+		spin_unlock_bh(&qdisc_list_lock);
+	}
+}
+EXPORT_SYMBOL(qdisc_list_del);
+
 struct Qdisc *qdisc_lookup(struct net_device *dev, u32 handle)
 {
 	unsigned int i;
+	struct Qdisc *q;
+
+	spin_lock_bh(&qdisc_list_lock);
 
 	for (i = 0; i < dev->num_tx_queues; i++) {
 		struct netdev_queue *txq = netdev_get_tx_queue(dev, i);
-		struct Qdisc *q, *txq_root = txq->qdisc_sleeping;
+		struct Qdisc *txq_root = txq->qdisc_sleeping;
 
 		q = qdisc_match_from_root(txq_root, handle);
 		if (q)
-			return q;
+			goto unlock;
 	}
-	return qdisc_match_from_root(dev->rx_queue.qdisc_sleeping, handle);
+
+	q = qdisc_match_from_root(dev->rx_queue.qdisc_sleeping, handle);
+
+unlock:
+	spin_unlock_bh(&qdisc_list_lock);
+
+	return q;
 }
 
 static struct Qdisc *qdisc_leaf(struct Qdisc *p, u32 classid)
@@ -810,8 +844,8 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 				goto err_out3;
 			}
 		}
-		if ((parent != TC_H_ROOT) && !(sch->flags & TCQ_F_INGRESS))
-			list_add_tail(&sch->list, &dev_queue->qdisc_sleeping->list);
+
+		qdisc_list_add(sch);
 
 		return sch;
 	}
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index c3ed4d44fc1..5f0ade7806a 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -526,10 +526,9 @@ void qdisc_destroy(struct Qdisc *qdisc)
 	    !atomic_dec_and_test(&qdisc->refcnt))
 		return;
 
-	if (qdisc->parent)
-		list_del(&qdisc->list);
-
 #ifdef CONFIG_NET_SCHED
+	qdisc_list_del(qdisc);
+
 	qdisc_put_stab(qdisc->stab);
 #endif
 	gen_kill_estimator(&qdisc->bstats, &qdisc->rate_est);
-- 
GitLab


From c4bd1fdab0deec0f69aeabab22075cb22ac8ad44 Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Thu, 21 Aug 2008 20:49:05 +0200
Subject: [PATCH 326/869] x86: fix section mismatch warning - uv_cpu_init

WARNING: vmlinux.o(.cpuinit.text+0x3cc4): Section mismatch in reference from the function uv_cpu_init() to the function .init.text:uv_system_init()
The function __cpuinit uv_cpu_init() references
a function __init uv_system_init().
If uv_system_init is only used by uv_cpu_init then
annotate uv_system_init with a matching annotation.

uv_system_init was ment to be called only once, so do it from codepath
(native_smp_prepare_cpus) which is called once, right before activation
of other cpus (smp_init).

Note: old code relied on uv_node_to_blade being initialized to 0,
but it'a not initialized from anywhere.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/genx2apic_uv_x.c | 8 +++++---
 arch/x86/kernel/smpboot.c        | 3 +++
 include/asm-x86/genapic_32.h     | 1 +
 include/asm-x86/genapic_64.h     | 1 +
 4 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 2d7e307c777..bfa837cb16b 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -293,7 +293,9 @@ static __init void uv_rtc_init(void)
 		sn_rtc_cycles_per_second = ticks_per_sec;
 }
 
-static __init void uv_system_init(void)
+static bool uv_system_inited;
+
+void __init uv_system_init(void)
 {
 	union uvh_si_addr_map_config_u m_n_config;
 	union uvh_node_id_u node_id;
@@ -383,6 +385,7 @@ static __init void uv_system_init(void)
 	map_mmr_high(max_pnode);
 	map_config_high(max_pnode);
 	map_mmioh_high(max_pnode);
+	uv_system_inited = true;
 }
 
 /*
@@ -391,8 +394,7 @@ static __init void uv_system_init(void)
  */
 void __cpuinit uv_cpu_init(void)
 {
-	if (!uv_node_to_blade)
-		uv_system_init();
+	BUG_ON(!uv_system_inited);
 
 	uv_blade_info[uv_numa_blade_id()].nr_online_cpus++;
 
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index e139e617f42..7985c5b3f91 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1221,6 +1221,9 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	printk(KERN_INFO "CPU%d: ", 0);
 	print_cpu_info(&cpu_data(0));
 	setup_boot_clock();
+
+	if (is_uv_system())
+		uv_system_init();
 out:
 	preempt_enable();
 }
diff --git a/include/asm-x86/genapic_32.h b/include/asm-x86/genapic_32.h
index b02ea6e17de..754d635f90f 100644
--- a/include/asm-x86/genapic_32.h
+++ b/include/asm-x86/genapic_32.h
@@ -118,6 +118,7 @@ enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
 #define get_uv_system_type()		UV_NONE
 #define is_uv_system()			0
 #define uv_wakeup_secondary(a, b)	1
+#define uv_system_init()		do {} while (0)
 
 
 #endif
diff --git a/include/asm-x86/genapic_64.h b/include/asm-x86/genapic_64.h
index 0f8504627c4..a47d6312913 100644
--- a/include/asm-x86/genapic_64.h
+++ b/include/asm-x86/genapic_64.h
@@ -42,6 +42,7 @@ extern int is_uv_system(void);
 extern struct genapic apic_x2apic_uv_x;
 DECLARE_PER_CPU(int, x2apic_extra_bits);
 extern void uv_cpu_init(void);
+extern void uv_system_init(void);
 extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip);
 
 extern void setup_apic_routing(void);
-- 
GitLab


From 9754a5b840a209bc1f192d59f63e81b698a55ac8 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Fri, 22 Aug 2008 08:22:23 +0200
Subject: [PATCH 327/869] x86: work around MTRR mask setting, v2

improve the debug printout:

- make it actually display something
- print it only once

would be nice to have a WARN_ONCE() facility, to feed such things to
kerneloops.org.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mtrr/generic.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 43102e03e2d..cb7d3b6a80e 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -401,7 +401,12 @@ static void generic_get_mtrr(unsigned int reg, unsigned long *base,
 		tmp |= ~((1<<(hi - 1)) - 1);
 
 		if (tmp != mask_lo) {
-			WARN_ON("mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
+			static int once = 1;
+
+			if (once) {
+				printk(KERN_INFO "mtrr: your BIOS has set up an incorrect mask, fixing it up.\n");
+				once = 0;
+			}
 			mask_lo = tmp;
 		}
 	}
-- 
GitLab


From 1082c7487cbe5a40755ba9e33552b6ecbf419bf2 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Fri, 22 Aug 2008 15:24:22 +0200
Subject: [PATCH 328/869] ALSA: hda - Fix call of alc888_coef_init()

Using init_hook to call alc888_coef_init() is problematic for configurations
that already set another init_hook.  Better to put it in alc_init() as is
(although it looks a bit hackish).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index b80e725432f..909f1c101c9 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -952,7 +952,7 @@ do_sku:
 					    tmp | 0x2010);
 			break;
 		case 0x10ec0888:
-			alc888_coef_init(codec);
+			/*alc888_coef_init(codec);*/ /* called in alc_init() */
 			break;
 		case 0x10ec0267:
 		case 0x10ec0268:
@@ -2439,6 +2439,8 @@ static int alc_init(struct hda_codec *codec)
 	unsigned int i;
 
 	alc_fix_pll(codec);
+	if (codec->vendor_id == 0x10ec0888)
+		alc888_coef_init(codec);
 
 	for (i = 0; i < spec->num_init_verbs; i++)
 		snd_hda_sequence_write(codec, spec->init_verbs[i]);
@@ -8426,8 +8428,6 @@ static int patch_alc883(struct hda_codec *codec)
 	codec->patch_ops = alc_patch_ops;
 	if (board_config == ALC883_AUTO)
 		spec->init_hook = alc883_auto_init;
-	else if (codec->vendor_id == 0x10ec0888)
-		spec->init_hook = alc888_coef_init;
 
 #ifdef CONFIG_SND_HDA_POWER_SAVE
 	if (!spec->loopback.amplist)
-- 
GitLab


From a697690bece75d4ba424c1318eb25c37d41d5829 Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Sat, 23 Aug 2008 01:04:06 +1000
Subject: [PATCH 329/869] crypto: authenc - Avoid using clobbered request
 pointer

Authenc works in two stages for encryption, it first encrypts and
then computes an ICV.  The context memory of the request is used
by both operations.  The problem is that when an asynchronous
encryption completes, we will compute the ICV and then reread the
context memory of the encryption to get the original request.

It just happens that we have a buffer of 16 bytes in front of the
request pointer, so ICVs of 16 bytes (such as SHA1) do not trigger
the bug.  However, any attempt to uses a larger ICV instantly kills
the machine when the first asynchronous encryption is completed.

This patch fixes this by saving the request pointer before we start
the ICV computation.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 crypto/authenc.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/crypto/authenc.c b/crypto/authenc.c
index 4b226768752..fd9f06c63d7 100644
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -174,8 +174,9 @@ static int crypto_authenc_genicv(struct aead_request *req, u8 *iv,
 static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
 					int err)
 {
+	struct aead_request *areq = req->data;
+
 	if (!err) {
-		struct aead_request *areq = req->data;
 		struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
 		struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
 		struct ablkcipher_request *abreq = aead_request_ctx(areq);
@@ -185,7 +186,7 @@ static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
 		err = crypto_authenc_genicv(areq, iv, 0);
 	}
 
-	aead_request_complete(req->data, err);
+	aead_request_complete(areq, err);
 }
 
 static int crypto_authenc_encrypt(struct aead_request *req)
@@ -216,14 +217,15 @@ static int crypto_authenc_encrypt(struct aead_request *req)
 static void crypto_authenc_givencrypt_done(struct crypto_async_request *req,
 					   int err)
 {
+	struct aead_request *areq = req->data;
+
 	if (!err) {
-		struct aead_request *areq = req->data;
 		struct skcipher_givcrypt_request *greq = aead_request_ctx(areq);
 
 		err = crypto_authenc_genicv(areq, greq->giv, 0);
 	}
 
-	aead_request_complete(req->data, err);
+	aead_request_complete(areq, err);
 }
 
 static int crypto_authenc_givencrypt(struct aead_givcrypt_request *req)
-- 
GitLab


From 8e05de88cf5a8ab225697ba12d5f19ec594169ef Mon Sep 17 00:00:00 2001
From: Nicolas Pitre <nico@cam.org>
Date: Fri, 22 Aug 2008 13:21:15 -0400
Subject: [PATCH 330/869] [ARM] orion5x: update defconfig to v2.6.27-rc4

Signed-off-by: Nicolas Pitre <nico@marvell.com>
---
 arch/arm/configs/orion5x_defconfig | 144 ++++++++++++++++++++++-------
 1 file changed, 112 insertions(+), 32 deletions(-)

diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 113a4557276..4017d83c9d2 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Mon Jun  2 23:54:48 2008
+# Linux kernel version: 2.6.27-rc4
+# Fri Aug 22 12:38:51 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -12,6 +12,7 @@ CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -23,6 +24,7 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -56,7 +58,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -83,11 +84,17 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
 CONFIG_KRETPROBES=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -97,12 +104,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -128,7 +136,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
@@ -142,8 +149,11 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
 # CONFIG_ARCH_MXC is not set
 CONFIG_ARCH_ORION5X=y
 # CONFIG_ARCH_PNX4008 is not set
@@ -195,7 +205,7 @@ CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_TLB_FEROCEON=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -280,10 +290,6 @@ CONFIG_BINFMT_ELF=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -361,6 +367,7 @@ CONFIG_NET_PKTGEN=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -377,6 +384,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -499,6 +508,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -575,6 +585,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -641,11 +652,14 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -694,7 +708,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -710,6 +723,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -815,44 +829,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -865,6 +900,7 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -928,9 +964,12 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 
 #
 # Multimedia devices
@@ -961,10 +1000,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -995,6 +1030,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1037,6 +1073,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1045,7 +1082,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1058,7 +1094,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1084,7 +1119,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1123,6 +1160,7 @@ CONFIG_RTC_DRV_PCF8563=y
 CONFIG_RTC_DRV_M41T80=y
 # CONFIG_RTC_DRV_M41T80_WDT is not set
 CONFIG_RTC_DRV_S35390A=y
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1143,6 +1181,27 @@ CONFIG_RTC_DRV_S35390A=y
 #
 # on-CPU RTC drivers
 #
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_DMATEST is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_UIO is not set
 
 #
@@ -1222,6 +1281,7 @@ CONFIG_JFFS2_RTIME=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1232,13 +1292,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1324,6 +1383,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
@@ -1338,11 +1399,13 @@ CONFIG_DEBUG_PREEMPT=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1352,7 +1415,18 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1365,6 +1439,7 @@ CONFIG_DEBUG_LL=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_ASYNC_CORE=y
 CONFIG_CRYPTO=y
 
 #
@@ -1410,6 +1485,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -1451,6 +1530,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_NEXT_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-- 
GitLab


From 18496e80f729be5f536d0315751b3bbb95ca913e Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Thu, 7 Aug 2008 00:11:12 +0300
Subject: [PATCH 331/869] [PATCH] ocfs2/cluster/tcp.c: make some functions
 static

Commit 0f475b2abed6cbccee1da20a0bef2895eb2a0edd (ocfs2/net: Silence build
warnings) made sense as far as it fixed compile warnings, but it was not
required that it made the functions global.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
 fs/ocfs2/cluster/tcp.c          | 44 +++++++++++++++++++++++++++------
 fs/ocfs2/cluster/tcp_internal.h | 32 ------------------------
 2 files changed, 37 insertions(+), 39 deletions(-)

diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index a27d61581bd..2bcf706d9dd 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -143,8 +143,8 @@ static void o2net_sc_postpone_idle(struct o2net_sock_container *sc);
 static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc);
 
 #ifdef CONFIG_DEBUG_FS
-void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
-		    u32 msgkey, struct task_struct *task, u8 node)
+static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+			   u32 msgkey, struct task_struct *task, u8 node)
 {
 	INIT_LIST_HEAD(&nst->st_net_debug_item);
 	nst->st_task = task;
@@ -153,31 +153,61 @@ void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
 	nst->st_node = node;
 }
 
-void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
 {
 	do_gettimeofday(&nst->st_sock_time);
 }
 
-void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+static void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
 {
 	do_gettimeofday(&nst->st_send_time);
 }
 
-void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+static void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
 {
 	do_gettimeofday(&nst->st_status_time);
 }
 
-void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
 					 struct o2net_sock_container *sc)
 {
 	nst->st_sc = sc;
 }
 
-void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
+static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
 {
 	nst->st_id = msg_id;
 }
+
+#else  /* CONFIG_DEBUG_FS */
+
+static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+				  u32 msgkey, struct task_struct *task, u8 node)
+{
+}
+
+static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+{
+}
+
+static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+{
+}
+
+static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+{
+}
+
+static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+						struct o2net_sock_container *sc)
+{
+}
+
+static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
+					u32 msg_id)
+{
+}
+
 #endif /* CONFIG_DEBUG_FS */
 
 static inline int o2net_reconnect_delay(void)
diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h
index 18307ff81b7..8d58cfe410b 100644
--- a/fs/ocfs2/cluster/tcp_internal.h
+++ b/fs/ocfs2/cluster/tcp_internal.h
@@ -224,42 +224,10 @@ struct o2net_send_tracking {
 	struct timeval			st_send_time;
 	struct timeval			st_status_time;
 };
-
-void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
-		    u32 msgkey, struct task_struct *task, u8 node);
-void o2net_set_nst_sock_time(struct o2net_send_tracking *nst);
-void o2net_set_nst_send_time(struct o2net_send_tracking *nst);
-void o2net_set_nst_status_time(struct o2net_send_tracking *nst);
-void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
-				  struct o2net_sock_container *sc);
-void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id);
-
 #else
 struct o2net_send_tracking {
 	u32	dummy;
 };
-
-static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
-				  u32 msgkey, struct task_struct *task, u8 node)
-{
-}
-static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
-{
-}
-static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
-{
-}
-static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
-{
-}
-static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
-						struct o2net_sock_container *sc)
-{
-}
-static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
-					u32 msg_id)
-{
-}
 #endif	/* CONFIG_DEBUG_FS */
 
 #endif /* O2CLUSTER_TCP_INTERNAL_H */
-- 
GitLab


From a57a874b04e27cb530a0e18c244387452e73ccce Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Wed, 6 Aug 2008 00:50:41 +0400
Subject: [PATCH 332/869] [PATCH] ocfs2/cluster/netdebug.c: fix warning

ocfs2/cluster/netdebug.c: fix warning

fs/ocfs2/cluster/netdebug.c:154: warning: format '%lu' expects
     type 'long unsigned int', but argument 17 has type 'suseconds_t'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
 fs/ocfs2/cluster/netdebug.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c
index d8bfa0eb41b..52276c02f71 100644
--- a/fs/ocfs2/cluster/netdebug.c
+++ b/fs/ocfs2/cluster/netdebug.c
@@ -138,20 +138,20 @@ static int nst_seq_show(struct seq_file *seq, void *v)
 			   "  message id:   %d\n"
 			   "  message type: %u\n"
 			   "  message key:  0x%08x\n"
-			   "  sock acquiry: %lu.%lu\n"
-			   "  send start:   %lu.%lu\n"
-			   "  wait start:   %lu.%lu\n",
+			   "  sock acquiry: %lu.%ld\n"
+			   "  send start:   %lu.%ld\n"
+			   "  wait start:   %lu.%ld\n",
 			   nst, (unsigned long)nst->st_task->pid,
 			   (unsigned long)nst->st_task->tgid,
 			   nst->st_task->comm, nst->st_node,
 			   nst->st_sc, nst->st_id, nst->st_msg_type,
 			   nst->st_msg_key,
 			   nst->st_sock_time.tv_sec,
-			   (unsigned long)nst->st_sock_time.tv_usec,
+			   (long)nst->st_sock_time.tv_usec,
 			   nst->st_send_time.tv_sec,
-			   (unsigned long)nst->st_send_time.tv_usec,
+			   (long)nst->st_send_time.tv_usec,
 			   nst->st_status_time.tv_sec,
-			   nst->st_status_time.tv_usec);
+			   (long)nst->st_status_time.tv_usec);
 	}
 
 	spin_unlock(&o2net_debug_lock);
@@ -276,7 +276,7 @@ static void *sc_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	return sc; /* unused, just needs to be null when done */
 }
 
-#define TV_SEC_USEC(TV) TV.tv_sec, (unsigned long)TV.tv_usec
+#define TV_SEC_USEC(TV) TV.tv_sec, (long)TV.tv_usec
 
 static int sc_seq_show(struct seq_file *seq, void *v)
 {
@@ -309,12 +309,12 @@ static int sc_seq_show(struct seq_file *seq, void *v)
 			   "  remote node:     %s\n"
 			   "  page off:        %zu\n"
 			   "  handshake ok:    %u\n"
-			   "  timer:           %lu.%lu\n"
-			   "  data ready:      %lu.%lu\n"
-			   "  advance start:   %lu.%lu\n"
-			   "  advance stop:    %lu.%lu\n"
-			   "  func start:      %lu.%lu\n"
-			   "  func stop:       %lu.%lu\n"
+			   "  timer:           %lu.%ld\n"
+			   "  data ready:      %lu.%ld\n"
+			   "  advance start:   %lu.%ld\n"
+			   "  advance stop:    %lu.%ld\n"
+			   "  func start:      %lu.%ld\n"
+			   "  func stop:       %lu.%ld\n"
 			   "  func key:        %u\n"
 			   "  func type:       %u\n",
 			   sc,
-- 
GitLab


From a1af7d15a18d1e375b0a6fee93789a0bbfe088b4 Mon Sep 17 00:00:00 2001
From: Mark Fasheh <mfasheh@suse.com>
Date: Tue, 19 Aug 2008 17:20:28 -0700
Subject: [PATCH 333/869] ocfs2: Fix sleep-with-spinlock recovery regression

This fixes a bug introduced with 539d8264093560b917ee3afe4c7f74e5da09d6a5:
    [PATCH 2/2] ocfs2: Fix race between mount and recovery

ocfs2_mark_dead_nodes() was reading journal inodes while holding the
spinlock protecting our in-memory recovery state. The fix is very simple -
the disk state is protected by a cluster lock that's already held, so we
just move the spinlock down past the read.

Reviewed-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
 fs/ocfs2/journal.c | 23 ++++++++++++++---------
 1 file changed, 14 insertions(+), 9 deletions(-)

diff --git a/fs/ocfs2/journal.c b/fs/ocfs2/journal.c
index 7a37240f7a3..c47bc2a809c 100644
--- a/fs/ocfs2/journal.c
+++ b/fs/ocfs2/journal.c
@@ -1418,13 +1418,13 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb)
 {
 	unsigned int node_num;
 	int status, i;
+	u32 gen;
 	struct buffer_head *bh = NULL;
 	struct ocfs2_dinode *di;
 
 	/* This is called with the super block cluster lock, so we
 	 * know that the slot map can't change underneath us. */
 
-	spin_lock(&osb->osb_lock);
 	for (i = 0; i < osb->max_slots; i++) {
 		/* Read journal inode to get the recovery generation */
 		status = ocfs2_read_journal_inode(osb, i, &bh, NULL);
@@ -1433,23 +1433,31 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb)
 			goto bail;
 		}
 		di = (struct ocfs2_dinode *)bh->b_data;
-		osb->slot_recovery_generations[i] =
-					ocfs2_get_recovery_generation(di);
+		gen = ocfs2_get_recovery_generation(di);
 		brelse(bh);
 		bh = NULL;
 
+		spin_lock(&osb->osb_lock);
+		osb->slot_recovery_generations[i] = gen;
+
 		mlog(0, "Slot %u recovery generation is %u\n", i,
 		     osb->slot_recovery_generations[i]);
 
-		if (i == osb->slot_num)
+		if (i == osb->slot_num) {
+			spin_unlock(&osb->osb_lock);
 			continue;
+		}
 
 		status = ocfs2_slot_to_node_num_locked(osb, i, &node_num);
-		if (status == -ENOENT)
+		if (status == -ENOENT) {
+			spin_unlock(&osb->osb_lock);
 			continue;
+		}
 
-		if (__ocfs2_recovery_map_test(osb, node_num))
+		if (__ocfs2_recovery_map_test(osb, node_num)) {
+			spin_unlock(&osb->osb_lock);
 			continue;
+		}
 		spin_unlock(&osb->osb_lock);
 
 		/* Ok, we have a slot occupied by another node which
@@ -1465,10 +1473,7 @@ int ocfs2_mark_dead_nodes(struct ocfs2_super *osb)
 			mlog_errno(status);
 			goto bail;
 		}
-
-		spin_lock(&osb->osb_lock);
 	}
-	spin_unlock(&osb->osb_lock);
 
 	status = 0;
 bail:
-- 
GitLab


From 83cab5338fa8c74f979223698c8d4cc88f2ab68e Mon Sep 17 00:00:00 2001
From: Tao Ma <tao.ma@oracle.com>
Date: Thu, 21 Aug 2008 14:14:27 +0800
Subject: [PATCH 334/869] ocfs2: Jump to correct label in
 ocfs2_expand_inline_dir()

When we fail to insert extent in ocfs2_expand_inline_dir(), we should go to
out_commit, not out.

Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
 fs/ocfs2/dir.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 8a187584808..8e9c4a47d81 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -1310,7 +1310,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 				  NULL);
 	if (ret) {
 		mlog_errno(ret);
-		goto out;
+		goto out_commit;
 	}
 
 	ret = ocfs2_journal_dirty(handle, di_bh);
@@ -1336,7 +1336,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 					  len, 0, NULL);
 		if (ret) {
 			mlog_errno(ret);
-			goto out;
+			goto out_commit;
 		}
 	}
 
-- 
GitLab


From 9780eb6cfaf7d2d5ccc061eaf94e7aec6a17791e Mon Sep 17 00:00:00 2001
From: Mark Fasheh <mfasheh@suse.com>
Date: Tue, 5 Aug 2008 11:32:46 -0700
Subject: [PATCH 335/869] ocfs2: correctly set i_blocks after inline dir gets
 expanded

We were setting i_blocks based on allocation before the extent insert, which
is wrong as the value is a calculation based on ip_clusters which gets
updated as a result of the insert. This patch moves the line in question
to just after the call to ocfs2_insert_extent().

Without this fix, inline directories were temporarily having an i_blocks
value of zero immediately after expansion to extents.

Reported-and-tested-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
 fs/ocfs2/dir.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index 8e9c4a47d81..9cce563fd62 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -1300,7 +1300,6 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 	di->i_size = cpu_to_le64(sb->s_blocksize);
 	di->i_ctime = di->i_mtime = cpu_to_le64(dir->i_ctime.tv_sec);
 	di->i_ctime_nsec = di->i_mtime_nsec = cpu_to_le32(dir->i_ctime.tv_nsec);
-	dir->i_blocks = ocfs2_inode_sector_count(dir);
 
 	/*
 	 * This should never fail as our extent list is empty and all
@@ -1313,6 +1312,12 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
 		goto out_commit;
 	}
 
+	/*
+	 * Set i_blocks after the extent insert for the most up to
+	 * date ip_clusters value.
+	 */
+	dir->i_blocks = ocfs2_inode_sector_count(dir);
+
 	ret = ocfs2_journal_dirty(handle, di_bh);
 	if (ret) {
 		mlog_errno(ret);
-- 
GitLab


From de6bf18e9ce0df807dab08cff08751cac383429d Mon Sep 17 00:00:00 2001
From: Louis Rilling <louis.rilling@kerlabs.com>
Date: Fri, 15 Aug 2008 12:37:23 -0700
Subject: [PATCH 336/869] [PATCH] configfs: Consolidate locking around
 configfs_detach_prep() in configfs_rmdir()

It appears that configfs_rmdir() can protect configfs_detach_prep() retries with
less calls to {spin,mutex}_{lock,unlock}, and a cleaner code.

This patch does not change any behavior, except that it removes two useless
lock/unlock pairs having nothing inside to protect and providing a useless
barrier.

Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com>
Signed-off-by: Joel Becker <Joel.Becker@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
 fs/configfs/dir.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)

diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c
index 7a8db78a91d..8e93341f3e8 100644
--- a/fs/configfs/dir.c
+++ b/fs/configfs/dir.c
@@ -1311,16 +1311,18 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 	 * Ensure that no racing symlink() will make detach_prep() fail while
 	 * the new link is temporarily attached
 	 */
-	mutex_lock(&configfs_symlink_mutex);
-	spin_lock(&configfs_dirent_lock);
 	do {
 		struct mutex *wait_mutex;
 
+		mutex_lock(&configfs_symlink_mutex);
+		spin_lock(&configfs_dirent_lock);
 		ret = configfs_detach_prep(dentry, &wait_mutex);
-		if (ret) {
+		if (ret)
 			configfs_detach_rollback(dentry);
-			spin_unlock(&configfs_dirent_lock);
-			mutex_unlock(&configfs_symlink_mutex);
+		spin_unlock(&configfs_dirent_lock);
+		mutex_unlock(&configfs_symlink_mutex);
+
+		if (ret) {
 			if (ret != -EAGAIN) {
 				config_item_put(parent_item);
 				return ret;
@@ -1329,13 +1331,8 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry)
 			/* Wait until the racing operation terminates */
 			mutex_lock(wait_mutex);
 			mutex_unlock(wait_mutex);
-
-			mutex_lock(&configfs_symlink_mutex);
-			spin_lock(&configfs_dirent_lock);
 		}
 	} while (ret == -EAGAIN);
-	spin_unlock(&configfs_dirent_lock);
-	mutex_unlock(&configfs_symlink_mutex);
 
 	/* Get a working ref for the duration of this function */
 	item = configfs_get_config_item(dentry);
-- 
GitLab


From 2338263e2cb3cd2f77cdc3fcab0312b6c7fc02c3 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Fri, 22 Aug 2008 16:18:22 -0400
Subject: [PATCH 337/869] Input: bcm5974 - add maintainer entry

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 MAINTAINERS | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index deedc0d827b..cdedf043e02 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -413,6 +413,12 @@ L:	linux-laptop@vger.kernel.org
 W:	http://www.canb.auug.org.au/~sfr/
 S:	Supported
 
+APPLE BCM5974 MULTITOUCH DRIVER
+P:	Henrik Rydberg
+M:	rydberg@euromail.se
+L:	linux-input@vger.kernel.org
+S:	Maintained
+
 APPLE SMC DRIVER
 P:	Nicolas Boichat
 M:	nicolas@boichat.ch
-- 
GitLab


From fdc0bde90a689b9145f2b6f271c03f4c99d09667 Mon Sep 17 00:00:00 2001
From: "Denis V. Lunev" <den@openvz.org>
Date: Sat, 23 Aug 2008 04:43:33 -0700
Subject: [PATCH 338/869] icmp: icmp_sk() should not use smp_processor_id() in
 preemptible code

Pass namespace into icmp_xmit_lock, obtain socket inside and return
it as a result for caller.

Thanks Alexey Dobryan for this report:

Steps to reproduce:

	CONFIG_PREEMPT=y
	CONFIG_DEBUG_PREEMPT=y
	tracepath <something>

BUG: using smp_processor_id() in preemptible [00000000] code: tracepath/3205
caller is icmp_sk+0x15/0x30
Pid: 3205, comm: tracepath Not tainted 2.6.27-rc4 #1

Call Trace:
 [<ffffffff8031af14>] debug_smp_processor_id+0xe4/0xf0
 [<ffffffff80409405>] icmp_sk+0x15/0x30
 [<ffffffff8040a17b>] icmp_send+0x4b/0x3f0
 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160
 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff8023a475>] ? local_bh_enable_ip+0x95/0x110
 [<ffffffff804285b9>] ? _spin_unlock_bh+0x39/0x40
 [<ffffffff8025a26c>] ? mark_held_locks+0x4c/0x90
 [<ffffffff8025a4ad>] ? trace_hardirqs_on+0xd/0x10
 [<ffffffff8025a415>] ? trace_hardirqs_on_caller+0xd5/0x160
 [<ffffffff803e91b4>] ip_fragment+0x8d4/0x900
 [<ffffffff803e7030>] ? ip_finish_output2+0x0/0x290
 [<ffffffff803e91e0>] ? ip_finish_output+0x0/0x60
 [<ffffffff803e6650>] ? dst_output+0x0/0x10
 [<ffffffff803e922c>] ip_finish_output+0x4c/0x60
 [<ffffffff803e92e3>] ip_output+0xa3/0xf0
 [<ffffffff803e68d0>] ip_local_out+0x20/0x30
 [<ffffffff803e753f>] ip_push_pending_frames+0x27f/0x400
 [<ffffffff80406313>] udp_push_pending_frames+0x233/0x3d0
 [<ffffffff804067d1>] udp_sendmsg+0x321/0x6f0
 [<ffffffff8040d155>] inet_sendmsg+0x45/0x80
 [<ffffffff803b967f>] sock_sendmsg+0xdf/0x110
 [<ffffffff8024a100>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff80257ce5>] ? validate_chain+0x415/0x1010
 [<ffffffff8027dc10>] ? __do_fault+0x140/0x450
 [<ffffffff802597d0>] ? __lock_acquire+0x260/0x590
 [<ffffffff803b9e55>] ? sockfd_lookup_light+0x45/0x80
 [<ffffffff803ba50a>] sys_sendto+0xea/0x120
 [<ffffffff80428e42>] ? _spin_unlock_irqrestore+0x42/0x80
 [<ffffffff803134bc>] ? __up_read+0x4c/0xb0
 [<ffffffff8024e0c6>] ? up_read+0x26/0x30
 [<ffffffff8020b8bb>] system_call_fastpath+0x16/0x1b

icmp6_sk() is similar.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/icmp.c | 22 ++++++++++++++--------
 net/ipv6/icmp.c | 23 ++++++++++++-----------
 2 files changed, 26 insertions(+), 19 deletions(-)

diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 860558633b2..55c355e6323 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -204,18 +204,22 @@ static struct sock *icmp_sk(struct net *net)
 	return net->ipv4.icmp_sk[smp_processor_id()];
 }
 
-static inline int icmp_xmit_lock(struct sock *sk)
+static inline struct sock *icmp_xmit_lock(struct net *net)
 {
+	struct sock *sk;
+
 	local_bh_disable();
 
+	sk = icmp_sk(net);
+
 	if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
 		/* This can happen if the output path signals a
 		 * dst_link_failure() for an outgoing ICMP packet.
 		 */
 		local_bh_enable();
-		return 1;
+		return NULL;
 	}
-	return 0;
+	return sk;
 }
 
 static inline void icmp_xmit_unlock(struct sock *sk)
@@ -354,15 +358,17 @@ static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
 	struct ipcm_cookie ipc;
 	struct rtable *rt = skb->rtable;
 	struct net *net = dev_net(rt->u.dst.dev);
-	struct sock *sk = icmp_sk(net);
-	struct inet_sock *inet = inet_sk(sk);
+	struct sock *sk;
+	struct inet_sock *inet;
 	__be32 daddr;
 
 	if (ip_options_echo(&icmp_param->replyopts, skb))
 		return;
 
-	if (icmp_xmit_lock(sk))
+	sk = icmp_xmit_lock(net);
+	if (sk == NULL)
 		return;
+	inet = inet_sk(sk);
 
 	icmp_param->data.icmph.checksum = 0;
 
@@ -419,7 +425,6 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 	if (!rt)
 		goto out;
 	net = dev_net(rt->u.dst.dev);
-	sk = icmp_sk(net);
 
 	/*
 	 *	Find the original header. It is expected to be valid, of course.
@@ -483,7 +488,8 @@ void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
 		}
 	}
 
-	if (icmp_xmit_lock(sk))
+	sk = icmp_xmit_lock(net);
+	if (sk == NULL)
 		return;
 
 	/*
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index abedf95fdf2..b3157a0cc15 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -91,19 +91,22 @@ static struct inet6_protocol icmpv6_protocol = {
 	.flags		=	INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
 };
 
-static __inline__ int icmpv6_xmit_lock(struct sock *sk)
+static __inline__ struct sock *icmpv6_xmit_lock(struct net *net)
 {
+	struct sock *sk;
+
 	local_bh_disable();
 
+	sk = icmpv6_sk(net);
 	if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
 		/* This can happen if the output path (f.e. SIT or
 		 * ip6ip6 tunnel) signals dst_link_failure() for an
 		 * outgoing ICMP6 packet.
 		 */
 		local_bh_enable();
-		return 1;
+		return NULL;
 	}
-	return 0;
+	return sk;
 }
 
 static __inline__ void icmpv6_xmit_unlock(struct sock *sk)
@@ -392,11 +395,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info,
 	fl.fl_icmp_code = code;
 	security_skb_classify_flow(skb, &fl);
 
-	sk = icmpv6_sk(net);
-	np = inet6_sk(sk);
-
-	if (icmpv6_xmit_lock(sk))
+	sk = icmpv6_xmit_lock(net);
+	if (sk == NULL)
 		return;
+	np = inet6_sk(sk);
 
 	if (!icmpv6_xrlim_allow(sk, type, &fl))
 		goto out;
@@ -539,11 +541,10 @@ static void icmpv6_echo_reply(struct sk_buff *skb)
 	fl.fl_icmp_type = ICMPV6_ECHO_REPLY;
 	security_skb_classify_flow(skb, &fl);
 
-	sk = icmpv6_sk(net);
-	np = inet6_sk(sk);
-
-	if (icmpv6_xmit_lock(sk))
+	sk = icmpv6_xmit_lock(net);
+	if (sk == NULL)
 		return;
+	np = inet6_sk(sk);
 
 	if (!fl.oif && ipv6_addr_is_multicast(&fl.fl6_dst))
 		fl.oif = np->mcast_oif;
-- 
GitLab


From f410a1fba7afa79d2992620e874a343fdba28332 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Sat, 23 Aug 2008 05:16:46 -0700
Subject: [PATCH 339/869] ipv6: protocol for address routes

This fixes a problem spotted with zebra, but not sure if it is
necessary a kernel problem.  With IPV6 when an address is added to an
interface, Zebra creates a duplicate RIB entry, one as a connected
route, and other as a kernel route.

When an address is added to an interface the RTN_NEWADDR message
causes Zebra to create a connected route. In IPV4 when an address is
added to an interface a RTN_NEWROUTE message is set to user space with
the protocol RTPROT_KERNEL. Zebra ignores these messages, because it
already has the connected route.

The problem is that route created in IPV6 has route protocol ==
RTPROT_BOOT.  Was this a design decision or a bug? This fixes it. Same
patch applies to both net-2.6 and stable.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/addrconf.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e2d3b7580b7..7b6a584b62d 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1688,6 +1688,7 @@ addrconf_prefix_route(struct in6_addr *pfx, int plen, struct net_device *dev,
 		.fc_dst_len = plen,
 		.fc_flags = RTF_UP | flags,
 		.fc_nlinfo.nl_net = dev_net(dev),
+		.fc_protocol = RTPROT_KERNEL,
 	};
 
 	ipv6_addr_copy(&cfg.fc_dst, pfx);
-- 
GitLab


From 9b4e27b52853c5da77e61a4e36fbc40688b7a829 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 22 Aug 2008 20:23:37 +0200
Subject: [PATCH 340/869] x86: fix: do not run code in amd_bus.c on non-AMD
 CPUs

Jan Beulich wrote:

> Even worse - this would even try to access the MSR on non-AMD CPUs
> (currently probably prevented just by the fact that only AMD ones use
> family values of 0x10 or higher).

This patch adds cpu vendor check to the postcore_initcalls.

Reported-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/pci/amd_bus.c | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index dbf53236971..4a6f1a6a3aa 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -555,9 +555,11 @@ static int __init early_fill_mp_bus_info(void)
 	return 0;
 }
 
-postcore_initcall(early_fill_mp_bus_info);
+#else  /* !CONFIG_X86_64 */
 
-#endif
+static int __init early_fill_mp_bus_info(void) { return 0; }
+
+#endif /* !CONFIG_X86_64 */
 
 /* common 32/64 bit code */
 
@@ -583,4 +585,15 @@ static int __init enable_pci_io_ecs(void)
 	return 0;
 }
 
-postcore_initcall(enable_pci_io_ecs);
+static int __init amd_postcore_init(void)
+{
+	if (boot_cpu_data.x86_vendor != X86_VENDOR_AMD)
+		return 0;
+
+	early_fill_mp_bus_info();
+	enable_pci_io_ecs();
+
+	return 0;
+}
+
+postcore_initcall(amd_postcore_init);
-- 
GitLab


From 91ede005d72df60d6b3f252be177a4743a6aa46a Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@amd.com>
Date: Fri, 22 Aug 2008 20:23:38 +0200
Subject: [PATCH 341/869] x86: fix: make PCI ECS for AMD CPUs hotplug capable

Until now, PCI ECS setup was performed at boot time only and for cpus
that are enabled then. This patch fixes this and adds cpu hotplug.

Tests sequence (check if ECS bit is set when bringing cpu online again):

 # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' )   < /dev/cpu/1/msr
 00000008 00404010
 # ( perl -e 'sysseek(STDOUT, 0xC001001F, 0); print pack "l*", 8, 0x00400010' ) > /dev/cpu/1/msr
 # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' )   < /dev/cpu/1/msr
 00000008 00400010
 # echo 0 > /sys/devices/system/cpu/cpu1/online
 # echo 1 > /sys/devices/system/cpu/cpu1/online
 # ( perl -e 'sysseek(STDIN, 0xC001001F, 0)'; hexdump -n 8 -e '2/4 "%08x " "\n"' )   < /dev/cpu/1/msr
 00000008 00404010

Reported-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/pci/amd_bus.c | 35 +++++++++++++++++++++++++++++++----
 1 file changed, 31 insertions(+), 4 deletions(-)

diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index 4a6f1a6a3aa..6a0fca78c36 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -1,6 +1,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/topology.h>
+#include <linux/cpu.h>
 #include "pci.h"
 
 #ifdef CONFIG_X86_64
@@ -565,7 +566,7 @@ static int __init early_fill_mp_bus_info(void) { return 0; }
 
 #define ENABLE_CF8_EXT_CFG      (1ULL << 46)
 
-static void enable_pci_io_ecs_per_cpu(void *unused)
+static void enable_pci_io_ecs(void *unused)
 {
 	u64 reg;
 	rdmsrl(MSR_AMD64_NB_CFG, reg);
@@ -575,13 +576,39 @@ static void enable_pci_io_ecs_per_cpu(void *unused)
 	}
 }
 
-static int __init enable_pci_io_ecs(void)
+static int __cpuinit amd_cpu_notify(struct notifier_block *self,
+				    unsigned long action, void *hcpu)
 {
+	int cpu = (long)hcpu;
+	switch(action) {
+	case CPU_ONLINE:
+	case CPU_ONLINE_FROZEN:
+		smp_call_function_single(cpu, enable_pci_io_ecs, NULL, 0);
+		break;
+	default:
+		break;
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata amd_cpu_notifier = {
+	.notifier_call	= amd_cpu_notify,
+};
+
+static int __init pci_io_ecs_init(void)
+{
+	int cpu;
+
 	/* assume all cpus from fam10h have IO ECS */
         if (boot_cpu_data.x86 < 0x10)
 		return 0;
-	on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1);
+
+	register_cpu_notifier(&amd_cpu_notifier);
+	for_each_online_cpu(cpu)
+		amd_cpu_notify(&amd_cpu_notifier, (unsigned long)CPU_ONLINE,
+			       (void *)(long)cpu);
 	pci_probe |= PCI_HAS_IO_ECS;
+
 	return 0;
 }
 
@@ -591,7 +618,7 @@ static int __init amd_postcore_init(void)
 		return 0;
 
 	early_fill_mp_bus_info();
-	enable_pci_io_ecs();
+	pci_io_ecs_init();
 
 	return 0;
 }
-- 
GitLab


From 8735728ef8dc935c4fb351f913758fdbb62c308d Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Fri, 22 Aug 2008 22:23:09 +0200
Subject: [PATCH 342/869] x86 MCE: Fix CPU hotplug problem with multiple
 multicore AMD CPUs

During CPU hot-remove the sysfs directory created by
threshold_create_bank(), defined in
arch/x86/kernel/cpu/mcheck/mce_amd_64.c, has to be removed before
its parent directory, created by mce_create_device(), defined in
arch/x86/kernel/cpu/mcheck/mce_64.c .  Moreover, when the CPU in
question is hotplugged again, obviously the latter has to be created
before the former.  At present, the right ordering is not enforced,
because all of these operations are carried out by CPU hotplug
notifiers which are not appropriately ordered with respect to each
other.  This leads to serious problems on systems with two or more
multicore AMD CPUs, among other things during suspend and hibernation.

Fix the problem by placing threshold bank CPU hotplug callbacks in
mce_cpu_callback(), so that they are invoked at the right places,
if defined.  Additionally, use kobject_del() to remove the sysfs
directory associated with the kobject created by
kobject_create_and_add() in threshold_create_bank(), to prevent the
kernel from crashing during CPU hotplug operations on systems with
two or more multicore AMD CPUs.

This patch fixes bug #11337.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Andi Kleen <andi@firstfloor.org>
Tested-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/mcheck/mce_64.c     |  5 +++++
 arch/x86/kernel/cpu/mcheck/mce_amd_64.c | 18 +++++-------------
 include/asm-x86/mce.h                   |  1 +
 3 files changed, 11 insertions(+), 13 deletions(-)

diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 65a339678ec..726a5fcdf34 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -759,6 +759,7 @@ static struct sysdev_class mce_sysclass = {
 };
 
 DEFINE_PER_CPU(struct sys_device, device_mce);
+void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu) __cpuinitdata;
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
@@ -883,9 +884,13 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 		mce_create_device(cpu);
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
 		break;
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
+		if (threshold_cpu_callback)
+			threshold_cpu_callback(action, cpu);
 		mce_remove_device(cpu);
 		break;
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 88736cadbaa..5eb390a4b2e 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -628,6 +628,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 	deallocate_threshold_block(cpu, bank);
 
 free_out:
+	kobject_del(b->kobj);
 	kobject_put(b->kobj);
 	kfree(b);
 	per_cpu(threshold_banks, cpu)[bank] = NULL;
@@ -645,14 +646,11 @@ static void threshold_remove_device(unsigned int cpu)
 }
 
 /* get notified when a cpu comes on/off */
-static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb,
-					    unsigned long action, void *hcpu)
+static void __cpuinit amd_64_threshold_cpu_callback(unsigned long action,
+						     unsigned int cpu)
 {
-	/* cpu was unsigned int to begin with */
-	unsigned int cpu = (unsigned long)hcpu;
-
 	if (cpu >= NR_CPUS)
-		goto out;
+		return;
 
 	switch (action) {
 	case CPU_ONLINE:
@@ -666,14 +664,8 @@ static int __cpuinit threshold_cpu_callback(struct notifier_block *nfb,
 	default:
 		break;
 	}
-      out:
-	return NOTIFY_OK;
 }
 
-static struct notifier_block threshold_cpu_notifier __cpuinitdata = {
-	.notifier_call = threshold_cpu_callback,
-};
-
 static __init int threshold_init_device(void)
 {
 	unsigned lcpu = 0;
@@ -684,7 +676,7 @@ static __init int threshold_init_device(void)
 		if (err)
 			return err;
 	}
-	register_hotcpu_notifier(&threshold_cpu_notifier);
+	threshold_cpu_callback = amd_64_threshold_cpu_callback;
 	return 0;
 }
 
diff --git a/include/asm-x86/mce.h b/include/asm-x86/mce.h
index 94f1fd79e22..531eaa58745 100644
--- a/include/asm-x86/mce.h
+++ b/include/asm-x86/mce.h
@@ -92,6 +92,7 @@ extern int mce_disabled;
 
 void mce_log(struct mce *m);
 DECLARE_PER_CPU(struct sys_device, device_mce);
+extern void (*threshold_cpu_callback)(unsigned long action, unsigned int cpu);
 
 #ifdef CONFIG_X86_MCE_INTEL
 void mce_intel_feature_init(struct cpuinfo_x86 *c);
-- 
GitLab


From 38c052f8cff1bd323ccfa968136a9556652ee420 Mon Sep 17 00:00:00 2001
From: Ingo Molnar <mingo@elte.hu>
Date: Sat, 23 Aug 2008 17:59:07 +0200
Subject: [PATCH 343/869] rtc: fix deadlock

if get_rtc_time() is _ever_ called with IRQs off, we deadlock badly
in it, waiting for jiffies to increment.

So make the code more robust by doing an explicit mdelay(20).

This solves a very hard to reproduce/debug hard lockup reported
by Mikael Pettersson.

Reported-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/asm-generic/rtc.h | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/include/asm-generic/rtc.h b/include/asm-generic/rtc.h
index be4af0029ac..71ef3f0b968 100644
--- a/include/asm-generic/rtc.h
+++ b/include/asm-generic/rtc.h
@@ -15,6 +15,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>
+#include <linux/delay.h>
 
 #define RTC_PIE 0x40		/* periodic interrupt enable */
 #define RTC_AIE 0x20		/* alarm interrupt enable */
@@ -43,7 +44,6 @@ static inline unsigned char rtc_is_updating(void)
 
 static inline unsigned int get_rtc_time(struct rtc_time *time)
 {
-	unsigned long uip_watchdog = jiffies;
 	unsigned char ctrl;
 	unsigned long flags;
 
@@ -53,19 +53,15 @@ static inline unsigned int get_rtc_time(struct rtc_time *time)
 
 	/*
 	 * read RTC once any update in progress is done. The update
-	 * can take just over 2ms. We wait 10 to 20ms. There is no need to
+	 * can take just over 2ms. We wait 20ms. There is no need to
 	 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
 	 * If you need to know *exactly* when a second has started, enable
 	 * periodic update complete interrupts, (via ioctl) and then 
 	 * immediately read /dev/rtc which will block until you get the IRQ.
 	 * Once the read clears, read the RTC time (again via ioctl). Easy.
 	 */
-
-	if (rtc_is_updating() != 0)
-		while (jiffies - uip_watchdog < 2*HZ/100) {
-			barrier();
-			cpu_relax();
-		}
+	if (rtc_is_updating())
+		mdelay(20);
 
 	/*
 	 * Only the values that we read from the RTC are set. We leave
-- 
GitLab


From 7a8fc9b248e77a4eab0613acf30a6811799786b3 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Sun, 17 Aug 2008 17:36:59 +0300
Subject: [PATCH 344/869] removed unused #include <linux/version.h>'s

This patch lets the files using linux/version.h match the files that
#include it.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/arm/plat-omap/clock.c                   | 1 -
 arch/cris/arch-v32/kernel/fasttimer.c        | 2 --
 arch/mn10300/kernel/mn10300-serial.c         | 1 -
 arch/powerpc/sysdev/bestcomm/gen_bd.c        | 1 -
 arch/x86/mach-rdc321x/platform.c             | 1 -
 drivers/atm/adummy.c                         | 1 -
 drivers/char/xilinx_hwicap/buffer_icap.h     | 1 -
 drivers/char/xilinx_hwicap/fifo_icap.h       | 1 -
 drivers/char/xilinx_hwicap/xilinx_hwicap.h   | 1 -
 drivers/edac/edac_core.h                     | 1 -
 drivers/i2c/busses/i2c-at91.c                | 1 -
 drivers/infiniband/hw/ehca/ehca_tools.h      | 1 -
 drivers/infiniband/hw/ipath/ipath_fs.c       | 1 -
 drivers/infiniband/hw/nes/nes.h              | 1 -
 drivers/infiniband/ulp/iser/iser_verbs.c     | 1 -
 drivers/input/keyboard/bf54x-keys.c          | 1 -
 drivers/input/touchscreen/mainstone-wm97xx.c | 1 -
 drivers/mfd/asic3.c                          | 1 -
 drivers/misc/eeprom_93cx6.c                  | 1 -
 drivers/mtd/maps/amd76xrom.c                 | 1 -
 drivers/mtd/maps/ck804xrom.c                 | 1 -
 drivers/mtd/maps/esb2rom.c                   | 1 -
 drivers/mtd/nand/au1550nd.c                  | 1 -
 drivers/net/myri10ge/myri10ge.c              | 1 -
 drivers/net/netxen/netxen_nic.h              | 1 -
 drivers/net/netxen/netxen_nic_ethtool.c      | 1 -
 drivers/net/netxen/netxen_nic_hdr.h          | 2 --
 drivers/net/tokenring/lanstreamer.c          | 1 -
 drivers/net/tokenring/lanstreamer.h          | 2 --
 drivers/net/wireless/b43legacy/main.c        | 1 -
 drivers/net/wireless/iwlwifi/iwl-3945-led.c  | 1 -
 drivers/net/wireless/iwlwifi/iwl-led.c       | 1 -
 drivers/net/wireless/iwlwifi/iwl-rfkill.c    | 1 -
 drivers/rtc/rtc-max6902.c                    | 2 --
 drivers/rtc/rtc-r9701.c                      | 1 -
 drivers/s390/net/ctcm_mpc.c                  | 1 -
 drivers/scsi/dpt/dpti_i2o.h                  | 1 -
 drivers/scsi/ips.c                           | 1 -
 drivers/scsi/ips.h                           | 1 -
 drivers/scsi/lpfc/lpfc_debugfs.c             | 1 -
 drivers/scsi/nsp32.c                         | 1 -
 drivers/scsi/nsp32.h                         | 1 -
 drivers/scsi/pcmcia/nsp_cs.c                 | 1 -
 drivers/scsi/qla2xxx/qla_mid.c               | 1 -
 drivers/usb/atm/ueagle-atm.c                 | 1 -
 drivers/usb/gadget/amd5536udc.c              | 1 -
 drivers/usb/gadget/s3c2410_udc.c             | 1 -
 drivers/usb/misc/iowarrior.c                 | 1 -
 drivers/usb/serial/garmin_gps.c              | 2 --
 drivers/video/arkfb.c                        | 1 -
 drivers/video/s3fb.c                         | 1 -
 drivers/video/vermilion/vermilion.h          | 1 -
 drivers/video/vt8623fb.c                     | 1 -
 drivers/video/xilinxfb.c                     | 1 -
 fs/jffs2/jffs2_fs_i.h                        | 1 -
 fs/xfs/xfs_dmapi.h                           | 1 -
 include/asm-x86/xen/hypervisor.h             | 1 -
 include/linux/fs_uart_pd.h                   | 1 -
 kernel/nsproxy.c                             | 1 -
 kernel/power/swap.c                          | 1 -
 kernel/user_namespace.c                      | 1 -
 kernel/utsname.c                             | 1 -
 kernel/utsname_sysctl.c                      | 1 -
 sound/mips/au1x00.c                          | 1 -
 sound/soc/at91/eti_b1_wm8731.c               | 1 -
 sound/soc/codecs/wm8753.c                    | 1 -
 sound/soc/codecs/wm9712.c                    | 1 -
 67 files changed, 72 deletions(-)

diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 23a07059999..197974defbe 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -10,7 +10,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
diff --git a/arch/cris/arch-v32/kernel/fasttimer.c b/arch/cris/arch-v32/kernel/fasttimer.c
index 2de9d5849ef..111caa1a2ef 100644
--- a/arch/cris/arch-v32/kernel/fasttimer.c
+++ b/arch/cris/arch-v32/kernel/fasttimer.c
@@ -19,8 +19,6 @@
 #include <asm/irq.h>
 #include <asm/system.h>
 
-#include <linux/version.h>
-
 #include <hwregs/reg_map.h>
 #include <hwregs/reg_rdwr.h>
 #include <hwregs/timer_defs.h>
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index 8b054e7a8ae..aa07d0cd190 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -17,7 +17,6 @@ static const char serial_revdate[] = "2007-11-06";
 #define SUPPORT_SYSRQ
 #endif
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/serial.h>
 #include <linux/circ_buf.h>
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/arch/powerpc/sysdev/bestcomm/gen_bd.c
index a3a134c35b0..e0a53e3147b 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.c
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.c
@@ -11,7 +11,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c
index a037041817c..4f4e50c3ad3 100644
--- a/arch/x86/mach-rdc321x/platform.c
+++ b/arch/x86/mach-rdc321x/platform.c
@@ -25,7 +25,6 @@
 #include <linux/list.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
-#include <linux/version.h>
 #include <linux/leds.h>
 
 #include <asm/gpio.h>
diff --git a/drivers/atm/adummy.c b/drivers/atm/adummy.c
index 2ebd07f2ef8..5effec6f545 100644
--- a/drivers/atm/adummy.c
+++ b/drivers/atm/adummy.c
@@ -3,7 +3,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/skbuff.h>
 #include <linux/errno.h>
diff --git a/drivers/char/xilinx_hwicap/buffer_icap.h b/drivers/char/xilinx_hwicap/buffer_icap.h
index c5b1840906b..8b0252bf06e 100644
--- a/drivers/char/xilinx_hwicap/buffer_icap.h
+++ b/drivers/char/xilinx_hwicap/buffer_icap.h
@@ -38,7 +38,6 @@
 
 #include <linux/types.h>
 #include <linux/cdev.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
diff --git a/drivers/char/xilinx_hwicap/fifo_icap.h b/drivers/char/xilinx_hwicap/fifo_icap.h
index ffabd3ba2bd..62bda453c90 100644
--- a/drivers/char/xilinx_hwicap/fifo_icap.h
+++ b/drivers/char/xilinx_hwicap/fifo_icap.h
@@ -38,7 +38,6 @@
 
 #include <linux/types.h>
 #include <linux/cdev.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.h b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
index 1f9c8b082db..24d0d9b938f 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.h
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.h
@@ -38,7 +38,6 @@
 
 #include <linux/types.h>
 #include <linux/cdev.h>
-#include <linux/version.h>
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index b27b13c5eb5..4b55ec607a8 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -34,7 +34,6 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/workqueue.h>
-#include <linux/version.h>
 
 #define EDAC_MC_LABEL_LEN	31
 #define EDAC_DEVICE_NAME_LEN	31
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index c1adcdbf797..9efb0213725 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -14,7 +14,6 @@
 */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/slab.h>
diff --git a/drivers/infiniband/hw/ehca/ehca_tools.h b/drivers/infiniband/hw/ehca/ehca_tools.h
index ec950bf8c47..21f7d06f14a 100644
--- a/drivers/infiniband/hw/ehca/ehca_tools.h
+++ b/drivers/infiniband/hw/ehca/ehca_tools.h
@@ -54,7 +54,6 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
-#include <linux/version.h>
 #include <linux/notifier.h>
 #include <linux/cpu.h>
 #include <linux/device.h>
diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index 23faba9d21e..8bb5170b4e4 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -31,7 +31,6 @@
  * SOFTWARE.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/fs.h>
 #include <linux/mount.h>
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index 39bd897b40c..8eb7ae96974 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -43,7 +43,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/workqueue.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <asm/io.h>
 #include <linux/crc32c.h>
 
diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c
index 63462ecca14..26ff6214a81 100644
--- a/drivers/infiniband/ulp/iser/iser_verbs.c
+++ b/drivers/infiniband/ulp/iser/iser_verbs.c
@@ -33,7 +33,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 
 #include "iscsi_iser.h"
 
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index 54ed8e2e1c0..6f227d3dbda 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -29,7 +29,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 
 #include <linux/init.h>
 #include <linux/fs.h>
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index 283f93a0cee..37a555f3730 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -25,7 +25,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index c6408a62d95..bc2a807f210 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -16,7 +16,6 @@
  *
  */
 
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c
index ea55654e594..15b1780025c 100644
--- a/drivers/misc/eeprom_93cx6.c
+++ b/drivers/misc/eeprom_93cx6.c
@@ -26,7 +26,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/delay.h>
 #include <linux/eeprom_93cx6.h>
 
diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c
index 948b86f35ef..d1eec7d3243 100644
--- a/drivers/mtd/maps/amd76xrom.c
+++ b/drivers/mtd/maps/amd76xrom.c
@@ -6,7 +6,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index effaf7cdefa..1a6feb4474d 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -9,7 +9,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c
index aa64a475278..bbbcdd4c8d1 100644
--- a/drivers/mtd/maps/esb2rom.c
+++ b/drivers/mtd/maps/esb2rom.c
@@ -12,7 +12,6 @@
 
 #include <linux/module.h>
 #include <linux/types.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <asm/io.h>
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 761946ea45b..92c334ff450 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -16,7 +16,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/version.h>
 #include <asm/io.h>
 
 #include <asm/mach-au1x00/au1xxx.h>
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 5d76cd09e24..54cd89cb083 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -56,7 +56,6 @@
 #include <linux/ethtool.h>
 #include <linux/firmware.h>
 #include <linux/delay.h>
-#include <linux/version.h>
 #include <linux/timer.h>
 #include <linux/vmalloc.h>
 #include <linux/crc32.h>
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index ab871df6b1d..244ab49c433 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -45,7 +45,6 @@
 #include <linux/in.h>
 #include <linux/tcp.h>
 #include <linux/skbuff.h>
-#include <linux/version.h>
 
 #include <linux/ethtool.h>
 #include <linux/mii.h>
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 4ad3e0844b9..b974ca0fc53 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -38,7 +38,6 @@
 #include <asm/io.h>
 #include <linux/netdevice.h>
 #include <linux/ethtool.h>
-#include <linux/version.h>
 
 #include "netxen_nic.h"
 #include "netxen_nic_hw.h"
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index e8e8d73f6ed..e80f9e3e597 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -32,8 +32,6 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
-
 #include <linux/spinlock.h>
 #include <asm/irq.h>
 #include <linux/init.h>
diff --git a/drivers/net/tokenring/lanstreamer.c b/drivers/net/tokenring/lanstreamer.c
index 47d84cd2809..59d1673f938 100644
--- a/drivers/net/tokenring/lanstreamer.c
+++ b/drivers/net/tokenring/lanstreamer.c
@@ -119,7 +119,6 @@
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
 #include <linux/spinlock.h>
-#include <linux/version.h>
 #include <linux/bitops.h>
 #include <linux/jiffies.h>
 
diff --git a/drivers/net/tokenring/lanstreamer.h b/drivers/net/tokenring/lanstreamer.h
index e7bb3494afc..13ccee6449c 100644
--- a/drivers/net/tokenring/lanstreamer.h
+++ b/drivers/net/tokenring/lanstreamer.h
@@ -60,8 +60,6 @@
  *
  */
 
-#include <linux/version.h>
-
 /* MAX_INTR - the maximum number of times we can loop
  * inside the interrupt function before returning
  * control to the OS (maximum value is 256)
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 2541c81932f..1cb77db5c29 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -34,7 +34,6 @@
 #include <linux/moduleparam.h>
 #include <linux/if_arp.h>
 #include <linux/etherdevice.h>
-#include <linux/version.h>
 #include <linux/firmware.h>
 #include <linux/wireless.h>
 #include <linux/workqueue.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index d3336966b6b..705c65bed9f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -27,7 +27,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index cb11c4a4d69..4eee1b163cd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -27,7 +27,6 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/dma-mapping.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-rfkill.c b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
index e5e5846e9f2..5d642298f04 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rfkill.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rfkill.c
@@ -27,7 +27,6 @@
  *****************************************************************************/
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/init.h>
 
 #include <net/mac80211.h>
diff --git a/drivers/rtc/rtc-max6902.c b/drivers/rtc/rtc-max6902.c
index 12f0310ae89..78b2551fb19 100644
--- a/drivers/rtc/rtc-max6902.c
+++ b/drivers/rtc/rtc-max6902.c
@@ -20,8 +20,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
-
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
diff --git a/drivers/rtc/rtc-r9701.c b/drivers/rtc/rtc-r9701.c
index b35f9bfa2af..395985b339c 100644
--- a/drivers/rtc/rtc-r9701.c
+++ b/drivers/rtc/rtc-r9701.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/device.h>
diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index 49ae1cd25ca..2de1e2fccbf 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -19,7 +19,6 @@
 #undef DEBUGDATA
 #undef DEBUGCCW
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/drivers/scsi/dpt/dpti_i2o.h b/drivers/scsi/dpt/dpti_i2o.h
index 19406cea6d6..179ad77f6cc 100644
--- a/drivers/scsi/dpt/dpti_i2o.h
+++ b/drivers/scsi/dpt/dpti_i2o.h
@@ -21,7 +21,6 @@
 
 #include <linux/i2o-dev.h>
 
-#include <linux/version.h>
 #include <linux/notifier.h>
 #include <asm/atomic.h>
 
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index 7c615c70ec5..bc9e6ddf41d 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -165,7 +165,6 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/stddef.h>
-#include <linux/version.h>
 #include <linux/string.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index e0657b6f009..4e49fbcfe8a 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -50,7 +50,6 @@
 #ifndef _IPS_H_
    #define _IPS_H_
 
-#include <linux/version.h>
 #include <linux/nmi.h>
    #include <asm/uaccess.h>
    #include <asm/io.h>
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 90272e65957..094b47e94b2 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -27,7 +27,6 @@
 #include <linux/pci.h>
 #include <linux/spinlock.h>
 #include <linux/ctype.h>
-#include <linux/version.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index edf9fdb3cb3..22052bb7bec 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -23,7 +23,6 @@
  *   1.2: PowerPC (big endian) support.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
diff --git a/drivers/scsi/nsp32.h b/drivers/scsi/nsp32.h
index 6715ecb3bfc..9565acf1aa7 100644
--- a/drivers/scsi/nsp32.h
+++ b/drivers/scsi/nsp32.h
@@ -16,7 +16,6 @@
 #ifndef _NSP32_H
 #define _NSP32_H
 
-#include <linux/version.h>
 //#define NSP32_DEBUG 9
 
 /*
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index a221b6ef9fa..24e6cb8396e 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -25,7 +25,6 @@
 
 ***********************************************************************/
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 50baf6a1d67..93560cd7278 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -6,7 +6,6 @@
  */
 #include "qla_def.h"
 
-#include <linux/version.h>
 #include <linux/moduleparam.h>
 #include <linux/vmalloc.h>
 #include <linux/smp_lock.h>
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index cb01b5106ef..b6483dd98ac 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -64,7 +64,6 @@
 #include <linux/ctype.h>
 #include <linux/sched.h>
 #include <linux/kthread.h>
-#include <linux/version.h>
 #include <linux/mutex.h>
 #include <linux/freezer.h>
 
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 1500e1b3c30..abf8192f89e 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -44,7 +44,6 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/sched.h>
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 53880738459..29d13ebe750 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -35,7 +35,6 @@
 #include <linux/list.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/version.h>
 #include <linux/clk.h>
 
 #include <linux/debugfs.h>
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index e6ca9979e3a..a4ef77ef917 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -19,7 +19,6 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 #include <linux/poll.h>
-#include <linux/version.h>
 #include <linux/usb/iowarrior.h>
 
 /* Version Information */
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 2e663f1afd5..d9538208807 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -38,8 +38,6 @@
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 
-#include <linux/version.h>
-
 /* the mode to be set when the port ist opened */
 static int initial_mode = 1;
 
diff --git a/drivers/video/arkfb.c b/drivers/video/arkfb.c
index 4bd569e479a..314d18694b6 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/arkfb.c
@@ -11,7 +11,6 @@
  *  Code is based on s3fb
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
diff --git a/drivers/video/s3fb.c b/drivers/video/s3fb.c
index 8361bd0e3df..4dcec48a1d7 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/s3fb.c
@@ -11,7 +11,6 @@
  * which is based on the code of neofb.
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
diff --git a/drivers/video/vermilion/vermilion.h b/drivers/video/vermilion/vermilion.h
index c4aba59d480..7491abfcf1f 100644
--- a/drivers/video/vermilion/vermilion.h
+++ b/drivers/video/vermilion/vermilion.h
@@ -30,7 +30,6 @@
 #define _VERMILION_H_
 
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/pci.h>
 #include <asm/atomic.h>
 #include <linux/mutex.h>
diff --git a/drivers/video/vt8623fb.c b/drivers/video/vt8623fb.c
index 34aae7a2a62..3df17dc8c3d 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/vt8623fb.c
@@ -12,7 +12,6 @@
  * (http://davesdomain.org.uk/viafb/)
  */
 
-#include <linux/version.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 7b3a8423f48..5da3d2423cc 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -24,7 +24,6 @@
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 #include <linux/errno.h>
 #include <linux/string.h>
 #include <linux/mm.h>
diff --git a/fs/jffs2/jffs2_fs_i.h b/fs/jffs2/jffs2_fs_i.h
index 31559f45fdd..4c41db91eaa 100644
--- a/fs/jffs2/jffs2_fs_i.h
+++ b/fs/jffs2/jffs2_fs_i.h
@@ -12,7 +12,6 @@
 #ifndef _JFFS2_FS_I
 #define _JFFS2_FS_I
 
-#include <linux/version.h>
 #include <linux/rbtree.h>
 #include <linux/posix_acl.h>
 #include <linux/mutex.h>
diff --git a/fs/xfs/xfs_dmapi.h b/fs/xfs/xfs_dmapi.h
index cdc2d3464a1..2813cdd7237 100644
--- a/fs/xfs/xfs_dmapi.h
+++ b/fs/xfs/xfs_dmapi.h
@@ -18,7 +18,6 @@
 #ifndef __XFS_DMAPI_H__
 #define __XFS_DMAPI_H__
 
-#include <linux/version.h>
 /*	Values used to define the on-disk version of dm_attrname_t. All
  *	on-disk attribute names start with the 8-byte string "SGI_DMI_".
  *
diff --git a/include/asm-x86/xen/hypervisor.h b/include/asm-x86/xen/hypervisor.h
index 8e15dd28c91..04ee0610014 100644
--- a/include/asm-x86/xen/hypervisor.h
+++ b/include/asm-x86/xen/hypervisor.h
@@ -35,7 +35,6 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/version.h>
 
 #include <xen/interface/xen.h>
 #include <xen/interface/version.h>
diff --git a/include/linux/fs_uart_pd.h b/include/linux/fs_uart_pd.h
index 809bb9ffc78..36b61ff3927 100644
--- a/include/linux/fs_uart_pd.h
+++ b/include/linux/fs_uart_pd.h
@@ -12,7 +12,6 @@
 #ifndef FS_UART_PD_H
 #define FS_UART_PD_H
 
-#include <linux/version.h>
 #include <asm/types.h>
 
 enum fs_uart_id {
diff --git a/kernel/nsproxy.c b/kernel/nsproxy.c
index 21575fc46d0..1d3ef29a258 100644
--- a/kernel/nsproxy.c
+++ b/kernel/nsproxy.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/nsproxy.h>
 #include <linux/init_task.h>
 #include <linux/mnt_namespace.h>
diff --git a/kernel/power/swap.c b/kernel/power/swap.c
index a0abf9a463f..80ccac849e4 100644
--- a/kernel/power/swap.c
+++ b/kernel/power/swap.c
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/file.h>
 #include <linux/utsname.h>
-#include <linux/version.h>
 #include <linux/delay.h>
 #include <linux/bitops.h>
 #include <linux/genhd.h>
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index a9ab0596de4..532858fa5b8 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -6,7 +6,6 @@
  */
 
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/nsproxy.h>
 #include <linux/slab.h>
 #include <linux/user_namespace.h>
diff --git a/kernel/utsname.c b/kernel/utsname.c
index 64d398f1244..815237a55af 100644
--- a/kernel/utsname.c
+++ b/kernel/utsname.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/uts.h>
 #include <linux/utsname.h>
-#include <linux/version.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 
diff --git a/kernel/utsname_sysctl.c b/kernel/utsname_sysctl.c
index fe3a56c2256..4ab9659d269 100644
--- a/kernel/utsname_sysctl.c
+++ b/kernel/utsname_sysctl.c
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/uts.h>
 #include <linux/utsname.h>
-#include <linux/version.h>
 #include <linux/sysctl.h>
 
 static void *get_uts(ctl_table *table, int write)
diff --git a/sound/mips/au1x00.c b/sound/mips/au1x00.c
index ee0741f9eb5..fbef38a9604 100644
--- a/sound/mips/au1x00.c
+++ b/sound/mips/au1x00.c
@@ -38,7 +38,6 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/version.h>
 #include <sound/core.h>
 #include <sound/initval.h>
 #include <sound/pcm.h>
diff --git a/sound/soc/at91/eti_b1_wm8731.c b/sound/soc/at91/eti_b1_wm8731.c
index b081e83766b..b81d6b2cfa1 100644
--- a/sound/soc/at91/eti_b1_wm8731.c
+++ b/sound/soc/at91/eti_b1_wm8731.c
@@ -22,7 +22,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/timer.h>
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 8604809f0c3..dc7b18fd278 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -34,7 +34,6 @@
 
 #include <linux/module.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c
index 1fb7f9a7aec..2f1c91b1d55 100644
--- a/sound/soc/codecs/wm9712.c
+++ b/sound/soc/codecs/wm9712.c
@@ -13,7 +13,6 @@
 
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/version.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
 #include <sound/core.h>
-- 
GitLab


From 819ddcafb33136f2ba18018a22edcf857f640528 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sun, 24 Aug 2008 02:45:32 +0200
Subject: [PATCH 345/869] mv643xx_eth: fix NAPI 'rotting packet' issue

When a receive interrupt occurs, mv643xx_eth would first process the
receive descriptors and then ACK the receive interrupt, instead of the
other way round.

This would leave a small race window between processing the last
receive descriptor and clearing the receive interrupt status in which
a new packet could come in, which would then 'rot' in the receive
ring until the next receive interrupt would come in.

Fix this by ACKing (clearing) the receive interrupt condition before
processing the receive descriptors.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 drivers/net/mv643xx_eth.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 46819af3b06..af279f26c40 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -650,8 +650,6 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
 
 	if (rx < budget) {
 		netif_rx_complete(mp->dev, napi);
-		wrl(mp, INT_CAUSE(mp->port_num), 0);
-		wrl(mp, INT_CAUSE_EXT(mp->port_num), 0);
 		wrl(mp, INT_MASK(mp->port_num), INT_TX_END | INT_RX | INT_EXT);
 	}
 
@@ -1796,6 +1794,7 @@ static irqreturn_t mv643xx_eth_irq(int irq, void *dev_id)
 	 */
 #ifdef MV643XX_ETH_NAPI
 	if (int_cause & INT_RX) {
+		wrl(mp, INT_CAUSE(mp->port_num), ~(int_cause & INT_RX));
 		wrl(mp, INT_MASK(mp->port_num), 0x00000000);
 		rdl(mp, INT_MASK(mp->port_num));
 
-- 
GitLab


From 92c70f27d2a78873c940e77c7f075cd8e2e60a2d Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sun, 24 Aug 2008 01:59:05 +0200
Subject: [PATCH 346/869] mv643xx_eth: fix double add_timer() on the receive
 oom timer

Commit 12e4ab79cd828563dc090d2117dc8626b344bc8f ("mv643xx_eth: be
more agressive about RX refill") changed the condition for the receive
out-of-memory timer to be scheduled from "the receive ring is empty"
to "the receive ring is not full".

This can lead to a situation where the receive out-of-memory timer is
pending because a previous rxq_refill() didn't manage to refill the
receive ring entirely as a result of being out of memory, and
rxq_refill() is then called again as a side effect of a packet receive
interrupt, and that rxq_refill() call then again does not succeed to
refill the entire receive ring with fresh empty skbuffs because we are
still out of memory, and then tries to call add_timer() on the already
scheduled out-of-memory timer.

This patch fixes this issue by changing the add_timer() call in
rxq_refill() to a mod_timer() call.  If the OOM timer was not already
scheduled, this will behave as before, whereas if it was already
scheduled, this patch will push back its firing time a bit, which is
safe because we've (unsuccessfully) attempted to refill the receive
ring just before we do this.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 drivers/net/mv643xx_eth.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index af279f26c40..8a91d79383d 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -509,10 +509,8 @@ static void rxq_refill(struct rx_queue *rxq)
 		skb_reserve(skb, 2);
 	}
 
-	if (rxq->rx_desc_count != rxq->rx_ring_size) {
-		rxq->rx_oom.expires = jiffies + (HZ / 10);
-		add_timer(&rxq->rx_oom);
-	}
+	if (rxq->rx_desc_count != rxq->rx_ring_size)
+		mod_timer(&rxq->rx_oom, jiffies + (HZ / 10));
 
 	spin_unlock_irqrestore(&mp->lock, flags);
 }
-- 
GitLab


From 8e0b1bf6ac6c4c6dd985e586cd765aede4678bba Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sun, 24 Aug 2008 02:30:42 +0200
Subject: [PATCH 347/869] mv643xx_eth: fix inconsistent lock semantics

Nicolas Pitre noted that mv643xx_eth_poll was incorrectly using
non-IRQ-safe locks while checking whether to wake up the netdevice's
transmit queue.  Convert the locking to *_irq() variants, since we
are running from softirq context where interrupts are enabled.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 drivers/net/mv643xx_eth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 8a91d79383d..30e6d4b8d56 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -634,9 +634,9 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
 				txq_reclaim(mp->txq + i, 0);
 
 		if (netif_carrier_ok(mp->dev)) {
-			spin_lock(&mp->lock);
+			spin_lock_irq(&mp->lock);
 			__txq_maybe_wake(mp->txq + mp->txq_primary);
-			spin_unlock(&mp->lock);
+			spin_unlock_irq(&mp->lock);
 		}
 	}
 #endif
-- 
GitLab


From 9e1f37724265725ad4c14fc2ef60a162dc13ac64 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sun, 24 Aug 2008 02:33:47 +0200
Subject: [PATCH 348/869] mv643xx_eth: fix NULL pointer dereference in
 rxq_process()

When we are low on memory, the assumption that every descriptor in the
receive ring will have an skbuff associated with it does not hold.

rxq_process() was assuming that if the receive descriptor it is working
on is not owned by the hardware, it can safely be processed and handed
to the networking stack.  But a descriptor in the receive ring not being
owned by the hardware can also happen when we are low on memory and did
not manage to refill the receive ring fully.

This patch changes rxq_process()'s bailout condition from "the first
receive descriptor to be processed is owned by the hardware" to "the
first receive descriptor to be processed is owned by the hardware OR
the number of valid receive descriptors in the ring is zero".

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 drivers/net/mv643xx_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 30e6d4b8d56..e33dfc0165f 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -527,7 +527,7 @@ static int rxq_process(struct rx_queue *rxq, int budget)
 	int rx;
 
 	rx = 0;
-	while (rx < budget) {
+	while (rx < budget && rxq->rx_desc_count) {
 		struct rx_desc *rx_desc;
 		unsigned int cmd_sts;
 		struct sk_buff *skb;
-- 
GitLab


From abe787170bb3888c5e587e8e986711fe32ddf2f9 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sun, 24 Aug 2008 03:00:20 +0200
Subject: [PATCH 349/869] mv643xx_eth: enforce multiple-of-8-bytes receive
 buffer size restriction

The mv643xx_eth hardware ignores the lower three bits of the buffer
size field in receive descriptors, causing the reception of full-sized
packets to fail at some MTUs.  Fix this by rounding the size of
allocated receive buffers up to a multiple of eight bytes.

While we are at it, add a bit of extra space to each receive buffer so
that we can handle multiple vlan tags on ingress.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 drivers/net/mv643xx_eth.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index e33dfc0165f..a02a5f4a029 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -474,11 +474,19 @@ static void rxq_refill(struct rx_queue *rxq)
 		/*
 		 * Reserve 2+14 bytes for an ethernet header (the
 		 * hardware automatically prepends 2 bytes of dummy
-		 * data to each received packet), 4 bytes for a VLAN
-		 * header, and 4 bytes for the trailing FCS -- 24
-		 * bytes total.
+		 * data to each received packet), 16 bytes for up to
+		 * four VLAN tags, and 4 bytes for the trailing FCS
+		 * -- 36 bytes total.
 		 */
-		skb_size = mp->dev->mtu + 24;
+		skb_size = mp->dev->mtu + 36;
+
+		/*
+		 * Make sure that the skb size is a multiple of 8
+		 * bytes, as the lower three bits of the receive
+		 * descriptor's buffer size field are ignored by
+		 * the hardware.
+		 */
+		skb_size = (skb_size + 7) & ~7;
 
 		skb = dev_alloc_skb(skb_size + dma_get_cache_alignment() - 1);
 		if (skb == NULL)
@@ -552,7 +560,7 @@ static int rxq_process(struct rx_queue *rxq, int budget)
 		spin_unlock_irqrestore(&mp->lock, flags);
 
 		dma_unmap_single(NULL, rx_desc->buf_ptr + 2,
-				 mp->dev->mtu + 24, DMA_FROM_DEVICE);
+				 rx_desc->buf_size, DMA_FROM_DEVICE);
 		rxq->rx_desc_count--;
 		rx++;
 
-- 
GitLab


From 83097aca8567a0bd593534853b71fe0fa9a75d69 Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@linux.intel.com>
Date: Sat, 23 Aug 2008 21:45:21 -0700
Subject: [PATCH 350/869] Fix oops in acer_wmi driver (acer_wmi_init)

The acer_wmi driver does a DMI scan for quirks, and then sets flags into the
"interface" datastructure for some cases. However, the quirks happen real early
before "interface" is per se initialized from NULL.

The patch below 1) adds a NULL pointer check and 2) (re)runs the quirks at the
end, when "interface" has it's final value.

Reported-by: kerneloops.org
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
CC: stable@vger.kernel.org
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/acer-wmi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index b2d9878dc3f..c6c77a505ec 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -192,6 +192,9 @@ static struct quirk_entry *quirks;
 
 static void set_quirks(void)
 {
+	if (!interface)
+		return;
+
 	if (quirks->mailled)
 		interface->capability |= ACER_CAP_MAILLED;
 
@@ -1237,6 +1240,8 @@ static int __init acer_wmi_init(void)
 		return -ENODEV;
 	}
 
+	set_quirks();
+
 	if (platform_driver_register(&acer_platform_driver)) {
 		printk(ACER_ERR "Unable to register platform driver.\n");
 		goto error_platform_register;
-- 
GitLab


From c4560318cf8fed91e3146a3c1247e11542d91d91 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sun, 24 Aug 2008 07:33:05 +0200
Subject: [PATCH 351/869] mv643xx_eth: bump version to 1.3

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
 drivers/net/mv643xx_eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index a02a5f4a029..0a18b9e96da 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -55,7 +55,7 @@
 #include <asm/system.h>
 
 static char mv643xx_eth_driver_name[] = "mv643xx_eth";
-static char mv643xx_eth_driver_version[] = "1.2";
+static char mv643xx_eth_driver_version[] = "1.3";
 
 #define MV643XX_ETH_CHECKSUM_OFFLOAD_TX
 #define MV643XX_ETH_NAPI
-- 
GitLab


From 54f961a628b737f66710eca0b0d95346645dd33e Mon Sep 17 00:00:00 2001
From: Jerome Glisse <glisse@freedesktop.org>
Date: Wed, 13 Aug 2008 09:46:31 +1000
Subject: [PATCH 352/869] radeon: fix some hard lockups on r3/4/500s

This patch should fix hard lockup and convert them in
softlockup (ie you can ssh the box but the gpu is busted
and we are waiting in loop for it to come back to reason).

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r300_cmdbuf.c | 117 ++++++++++++++++++++++-----
 drivers/gpu/drm/radeon/r300_reg.h    |   5 +-
 drivers/gpu/drm/radeon/radeon_cp.c   |  38 +++++----
 drivers/gpu/drm/radeon/radeon_drv.h  |  19 +++--
 4 files changed, 130 insertions(+), 49 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c
index 702df45320f..4b3bd6303da 100644
--- a/drivers/gpu/drm/radeon/r300_cmdbuf.c
+++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c
@@ -136,6 +136,18 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
 		ADVANCE_RING();
 	}
 
+	/* flus cache and wait idle clean after cliprect change */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(R300_RB3D_DC_FLUSH);
+	ADVANCE_RING();
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	ADVANCE_RING();
+	/* set flush flag */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
 	return 0;
 }
 
@@ -166,13 +178,13 @@ void r300_init_reg_flags(struct drm_device *dev)
 	ADD_RANGE(0x21DC, 1);
 	ADD_RANGE(R300_VAP_UNKNOWN_221C, 1);
 	ADD_RANGE(R300_VAP_CLIP_X_0, 4);
-	ADD_RANGE(R300_VAP_PVS_WAITIDLE, 1);
+	ADD_RANGE(R300_VAP_PVS_STATE_FLUSH_REG, 1);
 	ADD_RANGE(R300_VAP_UNKNOWN_2288, 1);
 	ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2);
 	ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
 	ADD_RANGE(R300_GB_ENABLE, 1);
 	ADD_RANGE(R300_GB_MSPOS0, 5);
-	ADD_RANGE(R300_TX_CNTL, 1);
+	ADD_RANGE(R300_TX_INVALTAGS, 1);
 	ADD_RANGE(R300_TX_ENABLE, 1);
 	ADD_RANGE(0x4200, 4);
 	ADD_RANGE(0x4214, 1);
@@ -388,15 +400,28 @@ static __inline__ int r300_emit_vpu(drm_radeon_private_t *dev_priv,
 	if (sz * 16 > cmdbuf->bufsz)
 		return -EINVAL;
 
-	BEGIN_RING(5 + sz * 4);
-	/* Wait for VAP to come to senses.. */
-	/* there is no need to emit it multiple times, (only once before VAP is programmed,
-	   but this optimization is for later */
-	OUT_RING_REG(R300_VAP_PVS_WAITIDLE, 0);
+	/* VAP is very sensitive so we purge cache before we program it
+	 * and we also flush its state before & after */
+	BEGIN_RING(6);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(R300_RB3D_DC_FLUSH);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	OUT_RING(CP_PACKET0(R300_VAP_PVS_STATE_FLUSH_REG, 0));
+	OUT_RING(0);
+	ADVANCE_RING();
+	/* set flush flag */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
+	BEGIN_RING(3 + sz * 4);
 	OUT_RING_REG(R300_VAP_PVS_UPLOAD_ADDRESS, addr);
 	OUT_RING(CP_PACKET0_TABLE(R300_VAP_PVS_UPLOAD_DATA, sz * 4 - 1));
 	OUT_RING_TABLE((int *)cmdbuf->buf, sz * 4);
+	ADVANCE_RING();
 
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_VAP_PVS_STATE_FLUSH_REG, 0));
+	OUT_RING(0);
 	ADVANCE_RING();
 
 	cmdbuf->buf += sz * 16;
@@ -424,6 +449,15 @@ static __inline__ int r300_emit_clear(drm_radeon_private_t *dev_priv,
 	OUT_RING_TABLE((int *)cmdbuf->buf, 8);
 	ADVANCE_RING();
 
+	BEGIN_RING(4);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(R300_RB3D_DC_FLUSH);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	ADVANCE_RING();
+	/* set flush flag */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
 	cmdbuf->buf += 8 * 4;
 	cmdbuf->bufsz -= 8 * 4;
 
@@ -613,11 +647,19 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
 	case RADEON_CNTL_BITBLT_MULTI:
 		return r300_emit_bitblt_multi(dev_priv, cmdbuf);
 
-	case RADEON_CP_INDX_BUFFER:	/* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
+	case RADEON_CP_INDX_BUFFER:
+		/* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
 		return r300_emit_indx_buffer(dev_priv, cmdbuf);
-	case RADEON_CP_3D_DRAW_IMMD_2:	/* triggers drawing using in-packet vertex data */
-	case RADEON_CP_3D_DRAW_VBUF_2:	/* triggers drawing of vertex buffers setup elsewhere */
-	case RADEON_CP_3D_DRAW_INDX_2:	/* triggers drawing using indices to vertex buffer */
+	case RADEON_CP_3D_DRAW_IMMD_2:
+		/* triggers drawing using in-packet vertex data */
+	case RADEON_CP_3D_DRAW_VBUF_2:
+		/* triggers drawing of vertex buffers setup elsewhere */
+	case RADEON_CP_3D_DRAW_INDX_2:
+		/* triggers drawing using indices to vertex buffer */
+		/* whenever we send vertex we clear flush & purge */
+		dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED |
+					   RADEON_PURGE_EMITED);
+		break;
 	case RADEON_WAIT_FOR_IDLE:
 	case RADEON_CP_NOP:
 		/* these packets are safe */
@@ -713,17 +755,53 @@ static __inline__ int r300_emit_packet3(drm_radeon_private_t *dev_priv,
  */
 static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
 {
+	uint32_t cache_z, cache_3d, cache_2d;
 	RING_LOCALS;
+	
+	cache_z = R300_ZC_FLUSH;
+	cache_2d = R300_RB2D_DC_FLUSH;
+	cache_3d = R300_RB3D_DC_FLUSH;
+	if (!(dev_priv->track_flush & RADEON_PURGE_EMITED)) {
+		/* we can purge, primitive where draw since last purge */
+		cache_z |= R300_ZC_FREE;
+		cache_2d |= R300_RB2D_DC_FREE;
+		cache_3d |= R300_RB3D_DC_FREE;
+	}
 
-	BEGIN_RING(6);
-	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
-	OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A);
+	/* flush & purge zbuffer */
+	BEGIN_RING(2);
 	OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));
-	OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE|
-		 R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE);
-	OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
-	OUT_RING(0x0);
+	OUT_RING(cache_z);
+	ADVANCE_RING();
+	/* flush & purge 3d */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(cache_3d);
+	ADVANCE_RING();
+	/* flush & purge texture */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_TX_INVALTAGS, 0));
+	OUT_RING(0);
+	ADVANCE_RING();
+	/* FIXME: is this one really needed ? */
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(R300_RB3D_AARESOLVE_CTL, 0));
+	OUT_RING(0);
+	ADVANCE_RING();
+	BEGIN_RING(2);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+	ADVANCE_RING();
+	/* flush & purge 2d through E2 as RB2D will trigger lockup */
+	BEGIN_RING(4);
+	OUT_RING(CP_PACKET0(R300_DSTCACHE_CTLSTAT, 0));
+	OUT_RING(cache_2d);
+	OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+	OUT_RING(RADEON_WAIT_2D_IDLECLEAN |
+		 RADEON_WAIT_HOST_IDLECLEAN);
 	ADVANCE_RING();
+	/* set flush & purge flags */
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED | RADEON_PURGE_EMITED;
 }
 
 /**
@@ -905,8 +983,7 @@ int r300_do_cp_cmdbuf(struct drm_device *dev,
 
 	DRM_DEBUG("\n");
 
-	/* See the comment above r300_emit_begin3d for why this call must be here,
-	 * and what the cleanup gotos are for. */
+	/* pacify */
 	r300_pacify(dev_priv);
 
 	if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) {
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index a6802f26afc..ee6f811599a 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -317,7 +317,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
  * Therefore, I suspect writing zero to 0x2284 synchronizes the engine and
  * avoids bugs caused by still running shaders reading bad data from memory.
  */
-#define R300_VAP_PVS_WAITIDLE               0x2284 /* GUESS */
+#define R300_VAP_PVS_STATE_FLUSH_REG        0x2284
 
 /* Absolutely no clue what this register is about. */
 #define R300_VAP_UNKNOWN_2288               0x2288
@@ -513,7 +513,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 /* gap */
 
 /* Zero to flush caches. */
-#define R300_TX_CNTL                        0x4100
+#define R300_TX_INVALTAGS                   0x4100
 #define R300_TX_FLUSH                       0x0
 
 /* The upper enable bits are guessed, based on fglrx reported limits. */
@@ -1362,6 +1362,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE.
 #define R300_RB3D_COLORPITCH2               0x4E40 /* GUESS */
 #define R300_RB3D_COLORPITCH3               0x4E44 /* GUESS */
 
+#define R300_RB3D_AARESOLVE_CTL             0x4E88
 /* gap */
 
 /* Guess by Vladimir.
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index f0de81a5689..3331f88dcfb 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -40,6 +40,7 @@
 #define RADEON_FIFO_DEBUG	0
 
 static int radeon_do_cleanup_cp(struct drm_device * dev);
+static void radeon_do_cp_start(drm_radeon_private_t * dev_priv);
 
 static u32 R500_READ_MCIND(drm_radeon_private_t *dev_priv, int addr)
 {
@@ -198,23 +199,8 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv)
 			DRM_UDELAY(1);
 		}
 	} else {
-		/* 3D */
-		tmp = RADEON_READ(R300_RB3D_DSTCACHE_CTLSTAT);
-		tmp |= RADEON_RB3D_DC_FLUSH_ALL;
-		RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp);
-
-		/* 2D */
-		tmp = RADEON_READ(R300_DSTCACHE_CTLSTAT);
-		tmp |= RADEON_RB3D_DC_FLUSH_ALL;
-		RADEON_WRITE(R300_DSTCACHE_CTLSTAT, tmp);
-
-		for (i = 0; i < dev_priv->usec_timeout; i++) {
-			if (!(RADEON_READ(R300_DSTCACHE_CTLSTAT)
-			  & RADEON_RB3D_DC_BUSY)) {
-				return 0;
-			}
-			DRM_UDELAY(1);
-		}
+		/* don't flush or purge cache here or lockup */
+		return 0;
 	}
 
 #if RADEON_FIFO_DEBUG
@@ -237,6 +223,9 @@ static int radeon_do_wait_for_fifo(drm_radeon_private_t * dev_priv, int entries)
 			return 0;
 		DRM_UDELAY(1);
 	}
+	DRM_INFO("wait for fifo failed status : 0x%08X 0x%08X\n",
+		 RADEON_READ(RADEON_RBBM_STATUS),
+		 RADEON_READ(R300_VAP_CNTL_STATUS));
 
 #if RADEON_FIFO_DEBUG
 	DRM_ERROR("failed!\n");
@@ -263,6 +252,9 @@ static int radeon_do_wait_for_idle(drm_radeon_private_t * dev_priv)
 		}
 		DRM_UDELAY(1);
 	}
+	DRM_INFO("wait idle failed status : 0x%08X 0x%08X\n",
+		 RADEON_READ(RADEON_RBBM_STATUS),
+		 RADEON_READ(R300_VAP_CNTL_STATUS));
 
 #if RADEON_FIFO_DEBUG
 	DRM_ERROR("failed!\n");
@@ -443,14 +435,20 @@ static void radeon_do_cp_start(drm_radeon_private_t * dev_priv)
 
 	dev_priv->cp_running = 1;
 
-	BEGIN_RING(6);
-
+	BEGIN_RING(8);
+	/* isync can only be written through cp on r5xx write it here */
+	OUT_RING(CP_PACKET0(RADEON_ISYNC_CNTL, 0));
+	OUT_RING(RADEON_ISYNC_ANY2D_IDLE3D |
+		 RADEON_ISYNC_ANY3D_IDLE2D |
+		 RADEON_ISYNC_WAIT_IDLEGUI |
+		 RADEON_ISYNC_CPSCRATCH_IDLEGUI);
 	RADEON_PURGE_CACHE();
 	RADEON_PURGE_ZCACHE();
 	RADEON_WAIT_UNTIL_IDLE();
-
 	ADVANCE_RING();
 	COMMIT_RING();
+
+	dev_priv->track_flush |= RADEON_FLUSH_EMITED | RADEON_PURGE_EMITED;
 }
 
 /* Reset the Command Processor.  This will not flush any pending
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 3f0eca957aa..09938169317 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -220,6 +220,9 @@ struct radeon_virt_surface {
 	struct drm_file *file_priv;
 };
 
+#define RADEON_FLUSH_EMITED	(1 < 0)
+#define RADEON_PURGE_EMITED	(1 < 1)
+
 typedef struct drm_radeon_private {
 	drm_radeon_ring_buffer_t ring;
 	drm_radeon_sarea_t *sarea_priv;
@@ -311,6 +314,7 @@ typedef struct drm_radeon_private {
 	unsigned long fb_aper_offset;
 
 	int num_gb_pipes;
+	int track_flush;
 } drm_radeon_private_t;
 
 typedef struct drm_radeon_buf_priv {
@@ -693,7 +697,6 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #define R300_ZB_ZCACHE_CTLSTAT                  0x4f18
 #	define R300_ZC_FLUSH		        (1 << 0)
 #	define R300_ZC_FREE		        (1 << 1)
-#	define R300_ZC_FLUSH_ALL		0x3
 #	define R300_ZC_BUSY		        (1 << 31)
 #define RADEON_RB3D_DSTCACHE_CTLSTAT	0x325c
 #	define RADEON_RB3D_DC_FLUSH		(3 << 0)
@@ -701,6 +704,8 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev,
 #	define RADEON_RB3D_DC_FLUSH_ALL		0xf
 #	define RADEON_RB3D_DC_BUSY		(1 << 31)
 #define R300_RB3D_DSTCACHE_CTLSTAT              0x4e4c
+#	define R300_RB3D_DC_FLUSH		(2 << 0)
+#	define R300_RB3D_DC_FREE		(2 << 2)
 #	define R300_RB3D_DC_FINISH		(1 << 4)
 #define RADEON_RB3D_ZSTENCILCNTL	0x1c2c
 #	define RADEON_Z_TEST_MASK		(7 << 4)
@@ -1246,17 +1251,17 @@ do {									\
 		OUT_RING(RADEON_RB3D_DC_FLUSH);				\
 	} else {                                                        \
 		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_DC_FLUSH);				\
+		OUT_RING(R300_RB3D_DC_FLUSH);				\
 	}                                                               \
 } while (0)
 
 #define RADEON_PURGE_CACHE() do {					\
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {	\
 		OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_DC_FLUSH_ALL);			\
+		OUT_RING(RADEON_RB3D_DC_FLUSH | RADEON_RB3D_DC_FREE);	\
 	} else {                                                        \
 		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_DC_FLUSH_ALL);			\
+		OUT_RING(R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);	\
 	}                                                               \
 } while (0)
 
@@ -1273,10 +1278,10 @@ do {									\
 #define RADEON_PURGE_ZCACHE() do {					\
 	if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) {	\
 		OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0));	\
-		OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL);			\
+		OUT_RING(RADEON_RB3D_ZC_FLUSH | RADEON_RB3D_ZC_FREE);			\
 	} else {                                                        \
-		OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));	\
-		OUT_RING(R300_ZC_FLUSH_ALL);				\
+		OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));	\
+		OUT_RING(R300_ZC_FLUSH | R300_ZC_FREE);				\
 	}                                                               \
 } while (0)
 
-- 
GitLab


From e2898c5fdd91f54c9c84fbf7d32edb8e4dfda574 Mon Sep 17 00:00:00 2001
From: Nicolai Haehnle <nhaehnle@gmail.com>
Date: Wed, 13 Aug 2008 09:49:15 +1000
Subject: [PATCH 353/869] drm/radeon: r300_cmdbuf: Always emit INDX_BUFFER
 immediately after DRAW_INDEX

DRAW_INDEX writes a vertex count to VAP_VF_CNTL. Docs say that behaviour
is undefined (i.e. lockups happen) when this write is not followed by the
right number of vertex indices.

Thus we used to do the wrong thing when drawing across many cliprects was
necessary, because we emitted a sequence
DRAW_INDEX, DRAW_INDEX, INDX_BUFFER, INDX_BUFFER
instead of
DRAW_INDEX, INDX_BUFFER, DRAW_INDEX, INDX_BUFFER
The latter is what we're doing now and which ought to be correct.

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r300_cmdbuf.c | 80 ++++++++++++++++++++++------
 1 file changed, 64 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c
index 4b3bd6303da..b1fdfc61f27 100644
--- a/drivers/gpu/drm/radeon/r300_cmdbuf.c
+++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c
@@ -577,22 +577,23 @@ static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv,
 	return 0;
 }
 
-static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv,
-					     drm_radeon_kcmd_buffer_t *cmdbuf)
+static __inline__ int r300_emit_draw_indx_2(drm_radeon_private_t *dev_priv,
+					    drm_radeon_kcmd_buffer_t *cmdbuf)
 {
-	u32 *cmd = (u32 *) cmdbuf->buf;
-	int count, ret;
+	u32 *cmd;
+	int count;
+	int expected_count;
 	RING_LOCALS;
 
-	count=(cmd[0]>>16) & 0x3fff;
+	cmd = (u32 *) cmdbuf->buf;
+	count = (cmd[0]>>16) & 0x3fff;
+	expected_count = cmd[1] >> 16;
+	if (!(cmd[1] & R300_VAP_VF_CNTL__INDEX_SIZE_32bit))
+		expected_count = (expected_count+1)/2;
 
-	if ((cmd[1] & 0x8000ffff) != 0x80000810) {
-		DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]);
-		return -EINVAL;
-	}
-	ret = !radeon_check_offset(dev_priv, cmd[2]);
-	if (ret) {
-		DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]);
+	if (count && count != expected_count) {
+		DRM_ERROR("3D_DRAW_INDX_2: packet size %i, expected %i\n",
+			count, expected_count);
 		return -EINVAL;
 	}
 
@@ -604,6 +605,50 @@ static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv,
 	cmdbuf->buf += (count+2)*4;
 	cmdbuf->bufsz -= (count+2)*4;
 
+	if (!count) {
+		drm_r300_cmd_header_t header;
+
+		if (cmdbuf->bufsz < 4*4 + sizeof(header)) {
+			DRM_ERROR("3D_DRAW_INDX_2: expect subsequent INDX_BUFFER, but stream is too short.\n");
+			return -EINVAL;
+		}
+
+		header.u = *(unsigned int *)cmdbuf->buf;
+
+		cmdbuf->buf += sizeof(header);
+		cmdbuf->bufsz -= sizeof(header);
+		cmd = (u32 *) cmdbuf->buf;
+
+		if (header.header.cmd_type != R300_CMD_PACKET3 ||
+		    header.packet3.packet != R300_CMD_PACKET3_RAW ||
+		    cmd[0] != CP_PACKET3(RADEON_CP_INDX_BUFFER, 2)) {
+			DRM_ERROR("3D_DRAW_INDX_2: expect subsequent INDX_BUFFER.\n");
+			return -EINVAL;
+		}
+
+		if ((cmd[1] & 0x8000ffff) != 0x80000810) {
+			DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]);
+			return -EINVAL;
+		}
+		if (!radeon_check_offset(dev_priv, cmd[2])) {
+			DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]);
+			return -EINVAL;
+		}
+		if (cmd[3] != expected_count) {
+			DRM_ERROR("INDX_BUFFER: buffer size %i, expected %i\n",
+				cmd[3], expected_count);
+			return -EINVAL;
+		}
+
+		BEGIN_RING(4);
+		OUT_RING(cmd[0]);
+		OUT_RING_TABLE((int *)(cmdbuf->buf + 4), 3);
+		ADVANCE_RING();
+
+		cmdbuf->buf += 4*4;
+		cmdbuf->bufsz -= 4*4;
+	}
+
 	return 0;
 }
 
@@ -648,18 +693,21 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
 		return r300_emit_bitblt_multi(dev_priv, cmdbuf);
 
 	case RADEON_CP_INDX_BUFFER:
-		/* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
-		return r300_emit_indx_buffer(dev_priv, cmdbuf);
+		DRM_ERROR("packet3 INDX_BUFFER without preceding 3D_DRAW_INDX_2 is illegal.\n");
+		return -EINVAL;
 	case RADEON_CP_3D_DRAW_IMMD_2:
 		/* triggers drawing using in-packet vertex data */
 	case RADEON_CP_3D_DRAW_VBUF_2:
 		/* triggers drawing of vertex buffers setup elsewhere */
+		dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED |
+					   RADEON_PURGE_EMITED);
+		break;
 	case RADEON_CP_3D_DRAW_INDX_2:
 		/* triggers drawing using indices to vertex buffer */
 		/* whenever we send vertex we clear flush & purge */
 		dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED |
 					   RADEON_PURGE_EMITED);
-		break;
+		return r300_emit_draw_indx_2(dev_priv, cmdbuf);
 	case RADEON_WAIT_FOR_IDLE:
 	case RADEON_CP_NOP:
 		/* these packets are safe */
@@ -757,7 +805,7 @@ static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
 {
 	uint32_t cache_z, cache_3d, cache_2d;
 	RING_LOCALS;
-	
+
 	cache_z = R300_ZC_FLUSH;
 	cache_2d = R300_RB2D_DC_FLUSH;
 	cache_3d = R300_RB3D_DC_FLUSH;
-- 
GitLab


From 649ffc06a62bf487b78440669bdfeb637f1d675b Mon Sep 17 00:00:00 2001
From: Nicolai Haehnle <nhaehnle@gmail.com>
Date: Wed, 13 Aug 2008 09:50:12 +1000
Subject: [PATCH 354/869] r300: Fix cliprect emit

This makes our handling of cliprects sane. drm_clip_rect always has exclusiv
bottom-right corners, but the hardware expects inclusive bottom-right corner
so we adjust this here.

This complements Michel Daenzer's commit 57aea290e1e0a26d1e74df6cff777eb9f03
to Mesa. See also http://bugs.freedesktop.org/show_bug.cgi?id=16123

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/r300_cmdbuf.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c
index b1fdfc61f27..4b27d9abb7b 100644
--- a/drivers/gpu/drm/radeon/r300_cmdbuf.c
+++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c
@@ -77,6 +77,9 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
 				return -EFAULT;
 			}
 
+			box.x2--; /* Hardware expects inclusive bottom-right corner */
+			box.y2--;
+
 			if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) {
 				box.x1 = (box.x1) &
 					R300_CLIPRECT_MASK;
@@ -95,8 +98,8 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
 					R300_CLIPRECT_MASK;
 				box.y2 = (box.y2 + R300_CLIPRECT_OFFSET) &
 					R300_CLIPRECT_MASK;
-
 			}
+
 			OUT_RING((box.x1 << R300_CLIPRECT_X_SHIFT) |
 				 (box.y1 << R300_CLIPRECT_Y_SHIFT));
 			OUT_RING((box.x2 << R300_CLIPRECT_X_SHIFT) |
-- 
GitLab


From e5b4f19417b75a2d7c1e36934f60a3e836c4337e Mon Sep 17 00:00:00 2001
From: Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
Date: Sun, 24 Aug 2008 17:00:00 +1000
Subject: [PATCH 355/869] drm: don't call the vblank tasklet with irqs
 disabled.

If a specific tasklet shares data with irq context,
it needs to take a private irq-blocking spinlock within
the tasklet itself.

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_irq.c  | 20 ++++++++++++--------
 drivers/gpu/drm/drm_lock.c | 12 +++++-------
 2 files changed, 17 insertions(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 089c015c01d..53f0e5af1cc 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -400,27 +400,31 @@ static void drm_locked_tasklet_func(unsigned long data)
 {
 	struct drm_device *dev = (struct drm_device *)data;
 	unsigned long irqflags;
-
+	void (*tasklet_func)(struct drm_device *);
+	
 	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+	tasklet_func = dev->locked_tasklet_func;
+	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
 
-	if (!dev->locked_tasklet_func ||
+	if (!tasklet_func ||
 	    !drm_lock_take(&dev->lock,
 			   DRM_KERNEL_CONTEXT)) {
-		spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
 		return;
 	}
 
 	dev->lock.lock_time = jiffies;
 	atomic_inc(&dev->counts[_DRM_STAT_LOCKS]);
 
-	dev->locked_tasklet_func(dev);
+	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
+	tasklet_func = dev->locked_tasklet_func;
+	dev->locked_tasklet_func = NULL;
+	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+	
+	if (tasklet_func != NULL)
+		tasklet_func(dev);
 
 	drm_lock_free(&dev->lock,
 		      DRM_KERNEL_CONTEXT);
-
-	dev->locked_tasklet_func = NULL;
-
-	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
 }
 
 /**
diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c
index 0998723cde7..d78e0dc1824 100644
--- a/drivers/gpu/drm/drm_lock.c
+++ b/drivers/gpu/drm/drm_lock.c
@@ -150,6 +150,7 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 {
 	struct drm_lock *lock = data;
 	unsigned long irqflags;
+	void (*tasklet_func)(struct drm_device *);
 
 	if (lock->context == DRM_KERNEL_CONTEXT) {
 		DRM_ERROR("Process %d using kernel context %d\n",
@@ -158,14 +159,11 @@ int drm_unlock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 	}
 
 	spin_lock_irqsave(&dev->tasklet_lock, irqflags);
-
-	if (dev->locked_tasklet_func) {
-		dev->locked_tasklet_func(dev);
-
-		dev->locked_tasklet_func = NULL;
-	}
-
+	tasklet_func = dev->locked_tasklet_func;
+	dev->locked_tasklet_func = NULL;
 	spin_unlock_irqrestore(&dev->tasklet_lock, irqflags);
+	if (tasklet_func != NULL)
+		tasklet_func(dev);
 
 	atomic_inc(&dev->counts[_DRM_STAT_UNLOCKS]);
 
-- 
GitLab


From 3e5fc80a404a24c858468030b63555cccfb3e79c Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@linux.ie>
Date: Sun, 24 Aug 2008 17:02:26 +1000
Subject: [PATCH 356/869] drm: don't set the signal blocker on the master
 process.

There is a problem with debugging the X server and gdb crashes in
the xkb startup code.

This avoids the problem by allowing the master process to get signals.
It should be safe as the signal blocker is mainly so that you can
Ctrl-Z a 3D application without locking up the whole box. Ctrl-Z the
X server isn't something many people do.

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/drm_lock.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c
index d78e0dc1824..a4caf95485d 100644
--- a/drivers/gpu/drm/drm_lock.c
+++ b/drivers/gpu/drm/drm_lock.c
@@ -105,14 +105,19 @@ int drm_lock(struct drm_device *dev, void *data, struct drm_file *file_priv)
 		  ret ? "interrupted" : "has lock");
 	if (ret) return ret;
 
-	sigemptyset(&dev->sigmask);
-	sigaddset(&dev->sigmask, SIGSTOP);
-	sigaddset(&dev->sigmask, SIGTSTP);
-	sigaddset(&dev->sigmask, SIGTTIN);
-	sigaddset(&dev->sigmask, SIGTTOU);
-	dev->sigdata.context = lock->context;
-	dev->sigdata.lock = dev->lock.hw_lock;
-	block_all_signals(drm_notifier, &dev->sigdata, &dev->sigmask);
+	/* don't set the block all signals on the master process for now 
+	 * really probably not the correct answer but lets us debug xkb
+ 	 * xserver for now */
+	if (!file_priv->master) {
+		sigemptyset(&dev->sigmask);
+		sigaddset(&dev->sigmask, SIGSTOP);
+		sigaddset(&dev->sigmask, SIGTSTP);
+		sigaddset(&dev->sigmask, SIGTTIN);
+		sigaddset(&dev->sigmask, SIGTTOU);
+		dev->sigdata.context = lock->context;
+		dev->sigdata.lock = dev->lock.hw_lock;
+		block_all_signals(drm_notifier, &dev->sigdata, &dev->sigmask);
+	}
 
 	if (dev->driver->dma_ready && (lock->flags & _DRM_LOCK_READY))
 		dev->driver->dma_ready(dev);
-- 
GitLab


From 060700b571717c997a2ea5e2049b848fa248ee13 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Sun, 24 Aug 2008 11:52:06 -0700
Subject: [PATCH 357/869] x86: do not enable TSC notifier if we don't need it

Impact: crash on non-TSC-equipped CPUs

Don't enable the TSC notifier if we *either*:

1. don't have a CPU, or
2. have a CPU with constant TSC.

In either of those cases, the notifier is either damaging (1) or useless(2).

From: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/tsc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 46af7167673..9bed5cae4bd 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -325,6 +325,10 @@ static struct notifier_block time_cpufreq_notifier_block = {
 
 static int __init cpufreq_tsc(void)
 {
+	if (!cpu_has_tsc)
+		return 0;
+	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+		return 0;
 	cpufreq_register_notifier(&time_cpufreq_notifier_block,
 				CPUFREQ_TRANSITION_NOTIFIER);
 	return 0;
-- 
GitLab


From a39f2f466f5db0be4045afaf9344a9039c2451ca Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Mon, 18 Aug 2008 20:35:16 -0700
Subject: [PATCH 358/869] sparc64: Make NUMA depend upon SMP.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index 923a98959fa..36b4b7ab9cf 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -231,6 +231,7 @@ endmenu
 
 config NUMA
 	bool "NUMA support"
+	depends on SMP
 
 config NODES_SHIFT
 	int
-- 
GitLab


From 349101da8e1f8e5eb1476b02823da80495224485 Mon Sep 17 00:00:00 2001
From: Martin Habets <errandir_news@mph.eclipse.co.uk>
Date: Mon, 18 Aug 2008 22:37:18 -0700
Subject: [PATCH 359/869] sparc: Add target for a stripped kernel

Add a target for a stripped kernel. This is used for the various
packaging targets (*-pkg).

Signed-off-by: Martin Habets <errandir_news@mph.eclipse.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/Makefile      | 8 ++++++--
 arch/sparc/boot/Makefile | 6 ++++++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index 6668e6037af..9592889a6fd 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -52,20 +52,24 @@ endif
 export INIT_Y CORE_Y DRIVERS_Y NET_Y LIBS_Y HEAD_Y kallsyms.o
 
 # Default target
-all: image
+all: zImage
 
 boot := arch/sparc/boot
 
-image tftpboot.img: vmlinux
+image zImage tftpboot.img: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
+# This is the image used for packaging
+KBUILD_IMAGE := $(boot)/zImage
+
 CLEAN_FILES += arch/$(ARCH)/boot/System.map
 
 # Don't use tabs in echo arguments.
 define archhelp
   echo  '* image        - kernel image ($(boot)/image)'
+  echo  '* zImage       - stripped kernel image ($(boot)/zImage)'
   echo  '  tftpboot.img - image prepared for tftp'
 endef
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index 22d331e1e94..3e77a9f5224 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -19,6 +19,9 @@ quiet_cmd_sysmap        = SYSMAP  $(obj)/System.map
       cmd_sysmap        = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
 quiet_cmd_image = LD      $@
       cmd_image = $(LD) $(LDFLAGS) $(EXTRA_LDFLAGS) $(LDFLAGS_$(@F)) -o $@
+quiet_cmd_strip = STRIP   $@
+      cmd_strip = $(STRIP) -R .comment -R .note -K sun4u_init -K _end -K _start $(obj)/image -o $@
+
 
 define rule_image
 	$(if $($(quiet)cmd_image),               \
@@ -49,6 +52,9 @@ LDFLAGS_image := -T arch/sparc/kernel/vmlinux.lds $(BTOBJS) \
 $(obj)/image: $(obj)/btfix.o FORCE
 	$(call if_changed_rule,image)
 
+$(obj)/zImage: $(obj)/image
+	$(call if_changed,strip)
+
 $(obj)/tftpboot.img: $(obj)/piggyback $(obj)/System.map $(obj)/image FORCE
 	$(call if_changed,elftoaout)
 	$(call if_changed,piggy)
-- 
GitLab


From a1068264522cb0a9b863d5357ade844e490bea41 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 22 Aug 2008 18:20:29 +0300
Subject: [PATCH 360/869] sh64: re-add the __strnlen_user() prototype

Commit 42fd3b142d8867f5b58d6fb75592cd20fd654c1b
(sh: Initial consolidation of the _32/_64 uaccess split.)
mistakenly removed the sh64 __strnlen_user() prototype,
resulting in the following compile error:

<--  snip  -->

...
  CC      init/main.o
In file included from include/linux/poll.h:13,
                 from include/linux/rtc.h:113,
                 from include/linux/efi.h:19,
                 from init/main.c:43:
arch/sh/include/asm/uaccess.h: In function 'strnlen_user':
arch/sh/include/asm/uaccess.h:213: error: implicit declaration of function '__strnlen_user'
...
make[2]: *** [init/main.o] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/include/asm/uaccess_64.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
index 81b3d515fcb..5580fd47100 100644
--- a/arch/sh/include/asm/uaccess_64.h
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -76,4 +76,6 @@ extern long __put_user_asm_l(void *, long);
 extern long __put_user_asm_q(void *, long);
 extern void __put_user_unknown(void);
 
+extern long __strnlen_user(const char *__s, long __n);
+
 #endif /* __ASM_SH_UACCESS_64_H */
-- 
GitLab


From e311be521fa9daedd8959d1a89f5e9bc5b54bb40 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 22 Aug 2008 18:20:36 +0300
Subject: [PATCH 361/869] sh: fix ptrace_64.c:user_disable_single_step()

This patch fixes the following compile error caused by
commit c459dbf294b4a3d70490a468a7ca3907fb2c2f57
(sh: ptrace single stepping cleanups.):

<--  snip  -->

...
  CC      arch/sh/kernel/ptrace_64.o
arch/sh/kernel/ptrace_64.c: In function 'user_disable_single_step':
arch/sh/kernel/ptrace_64.c:134: error: 'regs' undeclared (first use in this function)
arch/sh/kernel/ptrace_64.c:134: error: (Each undeclared identifier is reported only once
arch/sh/kernel/ptrace_64.c:134: error: for each function it appears in.)
...
make[2]: *** [arch/sh/kernel/ptrace_64.o] Error 1

<--  snip  -->

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/ptrace_64.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index 5922edd416d..9c6424892bd 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -131,6 +131,8 @@ void user_enable_single_step(struct task_struct *child)
 
 void user_disable_single_step(struct task_struct *child)
 {
+	struct pt_regs *regs = child->thread.uregs;
+
 	regs->sr &= ~SR_SSTEP;
 }
 
-- 
GitLab


From cc996099174dc05b35b7a29301026987990e7f8c Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sat, 2 Aug 2008 07:30:48 +0400
Subject: [PATCH 362/869] [PATCH] proc: inode number fixlet

Ouch, if number taken from IDA is too big, the intent was to signal an
error, not check for overflow and still do overflowing addition.

One still needs 2^28 proc entries to notice this.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/proc/generic.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/proc/generic.c b/fs/proc/generic.c
index 4fb81e9c94e..bca0f81eb68 100644
--- a/fs/proc/generic.c
+++ b/fs/proc/generic.c
@@ -330,6 +330,7 @@ retry:
 		spin_lock(&proc_inum_lock);
 		ida_remove(&proc_inum_ida, i);
 		spin_unlock(&proc_inum_lock);
+		return 0;
 	}
 	return PROC_DYNAMIC_FIRST + i;
 }
-- 
GitLab


From 2d8a10cd1760e7ecc07a21e409485947c68a3291 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 11 Aug 2008 11:33:57 -0400
Subject: [PATCH 363/869] [PATCH] fix efs_lookup()

it needs to use d_splice_alias(), not d_add()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/efs/namei.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/efs/namei.c b/fs/efs/namei.c
index 3a404e7fad5..291abb11e20 100644
--- a/fs/efs/namei.c
+++ b/fs/efs/namei.c
@@ -74,8 +74,7 @@ struct dentry *efs_lookup(struct inode *dir, struct dentry *dentry, struct namei
 	}
 	unlock_kernel();
 
-	d_add(dentry, inode);
-	return NULL;
+	return d_splice_alias(inode, dentry);
 }
 
 static struct inode *efs_nfs_get_inode(struct super_block *sb, u64 ino,
-- 
GitLab


From e45b590b976465c258f3e2a6cc84573fc19e16d3 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Thu, 7 Aug 2008 23:49:07 +0200
Subject: [PATCH 364/869] [PATCH] change d_add_ci argument ordering

As pointed out during review d_add_ci argument order should match d_add,
so switch the dentry and inode arguments.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/dcache.c                 | 2 +-
 fs/xfs/linux-2.6/xfs_iops.c | 2 +-
 include/linux/dcache.h      | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/dcache.c b/fs/dcache.c
index 101663d15e9..80e93956ace 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1236,7 +1236,7 @@ struct dentry *d_splice_alias(struct inode *inode, struct dentry *dentry)
  * If no entry exists with the exact case name, allocate new dentry with
  * the exact case, and return the spliced entry.
  */
-struct dentry *d_add_ci(struct inode *inode, struct dentry *dentry,
+struct dentry *d_add_ci(struct dentry *dentry, struct inode *inode,
 			struct qstr *name)
 {
 	int error;
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 91bcd979242..095d271f343 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -355,7 +355,7 @@ xfs_vn_ci_lookup(
 	/* else case-insensitive match... */
 	dname.name = ci_name.name;
 	dname.len = ci_name.len;
-	dentry = d_add_ci(VFS_I(ip), dentry, &dname);
+	dentry = d_add_ci(dentry, VFS_I(ip), &dname);
 	kmem_free(ci_name.name);
 	return dentry;
 }
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 07aa198f19e..efba1de629a 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -230,7 +230,7 @@ extern void d_delete(struct dentry *);
 extern struct dentry * d_alloc(struct dentry *, const struct qstr *);
 extern struct dentry * d_alloc_anon(struct inode *);
 extern struct dentry * d_splice_alias(struct inode *, struct dentry *);
-extern struct dentry * d_add_ci(struct inode *, struct dentry *, struct qstr *);
+extern struct dentry * d_add_ci(struct dentry *, struct inode *, struct qstr *);
 extern void shrink_dcache_sb(struct super_block *);
 extern void shrink_dcache_parent(struct dentry *);
 extern void shrink_dcache_for_umount(struct super_block *);
-- 
GitLab


From 2690421743b03c9be05d8e44c3b827986d1329a7 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Thu, 7 Aug 2008 23:50:21 +0200
Subject: [PATCH 365/869] [PATCH] ntfs: use d_add_ci

d_add_ci was lifted 1:1 from ntfs.  Change ntfs to use the common
version.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/ntfs/namei.c | 89 ++-----------------------------------------------
 1 file changed, 2 insertions(+), 87 deletions(-)

diff --git a/fs/ntfs/namei.c b/fs/ntfs/namei.c
index e1781c8b165..9e8a95be7a1 100644
--- a/fs/ntfs/namei.c
+++ b/fs/ntfs/namei.c
@@ -174,7 +174,6 @@ static struct dentry *ntfs_lookup(struct inode *dir_ino, struct dentry *dent,
 	// TODO: Consider moving this lot to a separate function! (AIA)
 handle_name:
    {
-	struct dentry *real_dent, *new_dent;
 	MFT_RECORD *m;
 	ntfs_attr_search_ctx *ctx;
 	ntfs_inode *ni = NTFS_I(dent_inode);
@@ -255,93 +254,9 @@ handle_name:
 	}
 	nls_name.hash = full_name_hash(nls_name.name, nls_name.len);
 
-	/*
-	 * Note: No need for dent->d_lock lock as i_mutex is held on the
-	 * parent inode.
-	 */
-
-	/* Does a dentry matching the nls_name exist already? */
-	real_dent = d_lookup(dent->d_parent, &nls_name);
-	/* If not, create it now. */
-	if (!real_dent) {
-		real_dent = d_alloc(dent->d_parent, &nls_name);
-		kfree(nls_name.name);
-		if (!real_dent) {
-			err = -ENOMEM;
-			goto err_out;
-		}
-		new_dent = d_splice_alias(dent_inode, real_dent);
-		if (new_dent)
-			dput(real_dent);
-		else
-			new_dent = real_dent;
-		ntfs_debug("Done.  (Created new dentry.)");
-		return new_dent;
-	}
+	dent = d_add_ci(dent, dent_inode, &nls_name);
 	kfree(nls_name.name);
-	/* Matching dentry exists, check if it is negative. */
-	if (real_dent->d_inode) {
-		if (unlikely(real_dent->d_inode != dent_inode)) {
-			/* This can happen because bad inodes are unhashed. */
-			BUG_ON(!is_bad_inode(dent_inode));
-			BUG_ON(!is_bad_inode(real_dent->d_inode));
-		}
-		/*
-		 * Already have the inode and the dentry attached, decrement
-		 * the reference count to balance the ntfs_iget() we did
-		 * earlier on.  We found the dentry using d_lookup() so it
-		 * cannot be disconnected and thus we do not need to worry
-		 * about any NFS/disconnectedness issues here.
-		 */
-		iput(dent_inode);
-		ntfs_debug("Done.  (Already had inode and dentry.)");
-		return real_dent;
-	}
-	/*
-	 * Negative dentry: instantiate it unless the inode is a directory and
-	 * has a 'disconnected' dentry (i.e. IS_ROOT and DCACHE_DISCONNECTED),
-	 * in which case d_move() that in place of the found dentry.
-	 */
-	if (!S_ISDIR(dent_inode->i_mode)) {
-		/* Not a directory; everything is easy. */
-		d_instantiate(real_dent, dent_inode);
-		ntfs_debug("Done.  (Already had negative file dentry.)");
-		return real_dent;
-	}
-	spin_lock(&dcache_lock);
-	if (list_empty(&dent_inode->i_dentry)) {
-		/*
-		 * Directory without a 'disconnected' dentry; we need to do
-		 * d_instantiate() by hand because it takes dcache_lock which
-		 * we already hold.
-		 */
-		list_add(&real_dent->d_alias, &dent_inode->i_dentry);
-		real_dent->d_inode = dent_inode;
-		spin_unlock(&dcache_lock);
-		security_d_instantiate(real_dent, dent_inode);
-		ntfs_debug("Done.  (Already had negative directory dentry.)");
-		return real_dent;
-	}
-	/*
-	 * Directory with a 'disconnected' dentry; get a reference to the
-	 * 'disconnected' dentry.
-	 */
-	new_dent = list_entry(dent_inode->i_dentry.next, struct dentry,
-			d_alias);
-	dget_locked(new_dent);
-	spin_unlock(&dcache_lock);
-	/* Do security vodoo. */
-	security_d_instantiate(real_dent, dent_inode);
-	/* Move new_dent in place of real_dent. */
-	d_move(new_dent, real_dent);
-	/* Balance the ntfs_iget() we did above. */
-	iput(dent_inode);
-	/* Throw away real_dent. */
-	dput(real_dent);
-	/* Use new_dent as the actual dentry. */
-	ntfs_debug("Done.  (Already had negative, disconnected directory "
-			"dentry.)");
-	return new_dent;
+	return dent;
 
 eio_err_out:
 	ntfs_error(vol->sb, "Illegal file name attribute. Run chkdsk.");
-- 
GitLab


From 645e68ed4d14272f0b47e2474f90577191bef781 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 11 Aug 2008 23:51:22 -0400
Subject: [PATCH 366/869] [PATCH] fix osf_getdirents()

Return value of filldir callback is just "should we stop here"; it's
not a usable channel for passing error values (i.e. ->readdir() will
forget anything except "is it non-zero").

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 arch/alpha/kernel/osf_sys.c | 19 ++++++++++++-------
 1 file changed, 12 insertions(+), 7 deletions(-)

diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 6e943135f0e..8509dad3120 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -121,24 +121,29 @@ osf_filldir(void *__buf, const char *name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	if (buf->basep) {
 		if (put_user(offset, buf->basep))
-			return -EFAULT;
+			goto Efault;
 		buf->basep = NULL;
 	}
 	dirent = buf->dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(namlen, &dirent->d_namlen);
-	put_user(reclen, &dirent->d_reclen);
-	if (copy_to_user(dirent->d_name, name, namlen) ||
+	if (put_user(d_ino, &dirent->d_ino) ||
+	    put_user(namlen, &dirent->d_namlen) ||
+	    put_user(reclen, &dirent->d_reclen) ||
+	    copy_to_user(dirent->d_name, name, namlen) ||
 	    put_user(0, dirent->d_name + namlen))
-		return -EFAULT;
+		goto Efault;
 	dirent = (void __user *)dirent + reclen;
 	buf->dirent = dirent;
 	buf->count -= reclen;
 	return 0;
+Efault:
+	buf->error = -EFAULT;
+	return -EFAULT;
 }
 
 asmlinkage int
-- 
GitLab


From da574983de9f9283ba35662c8723627096e160de Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 12 Aug 2008 00:04:22 -0400
Subject: [PATCH 367/869] [PATCH] fix hpux_getdents()

Missing checks for -EFAULT, broken handling of overflow.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 arch/parisc/hpux/fs.c | 30 +++++++++++++++++++-----------
 1 file changed, 19 insertions(+), 11 deletions(-)

diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 1263f00dc35..69ff671498e 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -84,22 +84,28 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	dirent = buf->previous;
 	if (dirent)
-		put_user(offset, &dirent->d_off);
+		if (put_user(offset, &dirent->d_off))
+			goto Efault;
 	dirent = buf->current_dir;
+	if (put_user(d_ino, &dirent->d_ino) ||
+	    put_user(reclen, &dirent->d_reclen) ||
+	    put_user(namlen, &dirent->d_namlen) ||
+	    copy_to_user(dirent->d_name, name, namlen) ||
+	    put_user(0, dirent->d_name + namlen))
+		goto Efault;
 	buf->previous = dirent;
-	put_user(d_ino, &dirent->d_ino);
-	put_user(reclen, &dirent->d_reclen);
-	put_user(namlen, &dirent->d_namlen);
-	copy_to_user(dirent->d_name, name, namlen);
-	put_user(0, dirent->d_name + namlen);
-	dirent = (void __user *)dirent + reclen;
-	buf->current_dir = dirent;
+	buf->current_dir = (void __user *)dirent + reclen;
 	buf->count -= reclen;
 	return 0;
+Efault:
+	buffer->error = -EFAULT;
+	return -EFAULT;
 }
 
 #undef NAME_OFFSET
@@ -126,8 +132,10 @@ int hpux_getdents(unsigned int fd, struct hpux_dirent __user *dirent, unsigned i
 	error = buf.error;
 	lastdirent = buf.previous;
 	if (lastdirent) {
-		put_user(file->f_pos, &lastdirent->d_off);
-		error = count - buf.count;
+		if (put_user(file->f_pos, &lastdirent->d_off))
+			error = -EFAULT;
+		else
+			error = count - buf.count;
 	}
 
 out_putf:
-- 
GitLab


From 8f3f655da7288504c1013621090ecc940173ae1c Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue, 12 Aug 2008 00:28:24 -0400
Subject: [PATCH 368/869] [PATCH] fix regular readdir() and friends

Handling of -EOVERFLOW.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/compat.c  | 8 ++++++--
 fs/readdir.c | 8 ++++++--
 2 files changed, 12 insertions(+), 4 deletions(-)

diff --git a/fs/compat.c b/fs/compat.c
index c9d1472e65c..075d0509970 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -792,8 +792,10 @@ static int compat_fillonedir(void *__buf, const char *name, int namlen,
 	if (buf->result)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->result = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	buf->result++;
 	dirent = buf->dirent;
 	if (!access_ok(VERIFY_WRITE, dirent,
@@ -862,8 +864,10 @@ static int compat_filldir(void *__buf, const char *name, int namlen,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	dirent = buf->previous;
 	if (dirent) {
 		if (__put_user(offset, &dirent->d_off))
diff --git a/fs/readdir.c b/fs/readdir.c
index 4e026e5407f..93a7559bbfd 100644
--- a/fs/readdir.c
+++ b/fs/readdir.c
@@ -80,8 +80,10 @@ static int fillonedir(void * __buf, const char * name, int namlen, loff_t offset
 	if (buf->result)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->result = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	buf->result++;
 	dirent = buf->dirent;
 	if (!access_ok(VERIFY_WRITE, dirent,
@@ -155,8 +157,10 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 	if (reclen > buf->count)
 		return -EINVAL;
 	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
+	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino) {
+		buf->error = -EOVERFLOW;
 		return -EOVERFLOW;
+	}
 	dirent = buf->previous;
 	if (dirent) {
 		if (__put_user(offset, &dirent->d_off))
-- 
GitLab


From 59af1584bf33810639cb98d79856021253e2177c Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 24 Aug 2008 07:24:41 -0400
Subject: [PATCH 369/869] [PATCH] fix ->llseek() for a bunch of directories

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/9p/vfs_dir.c             | 1 +
 fs/adfs/dir.c               | 1 +
 fs/affs/dir.c               | 1 +
 fs/autofs4/root.c           | 2 ++
 fs/befs/linuxvfs.c          | 1 +
 fs/xfs/linux-2.6/xfs_file.c | 1 +
 6 files changed, 7 insertions(+)

diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 88e3787c6ea..e298fe19409 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -119,6 +119,7 @@ int v9fs_dir_release(struct inode *inode, struct file *filp)
 
 const struct file_operations v9fs_dir_operations = {
 	.read = generic_read_dir,
+	.llseek = generic_file_llseek,
 	.readdir = v9fs_dir_readdir,
 	.open = v9fs_file_open,
 	.release = v9fs_dir_release,
diff --git a/fs/adfs/dir.c b/fs/adfs/dir.c
index fc1a8dc64d7..85a30e92980 100644
--- a/fs/adfs/dir.c
+++ b/fs/adfs/dir.c
@@ -197,6 +197,7 @@ out:
 
 const struct file_operations adfs_dir_operations = {
 	.read		= generic_read_dir,
+	.llseek		= generic_file_llseek,
 	.readdir	= adfs_readdir,
 	.fsync		= file_fsync,
 };
diff --git a/fs/affs/dir.c b/fs/affs/dir.c
index 6e3f282424b..7b36904dbea 100644
--- a/fs/affs/dir.c
+++ b/fs/affs/dir.c
@@ -19,6 +19,7 @@ static int affs_readdir(struct file *, void *, filldir_t);
 
 const struct file_operations affs_dir_operations = {
 	.read		= generic_read_dir,
+	.llseek		= generic_file_llseek,
 	.readdir	= affs_readdir,
 	.fsync		= file_fsync,
 };
diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c
index bcfb2dc0a61..2a41c2a7fc5 100644
--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -36,6 +36,7 @@ const struct file_operations autofs4_root_operations = {
 	.release	= dcache_dir_close,
 	.read		= generic_read_dir,
 	.readdir	= dcache_readdir,
+	.llseek		= dcache_dir_lseek,
 	.ioctl		= autofs4_root_ioctl,
 };
 
@@ -44,6 +45,7 @@ const struct file_operations autofs4_dir_operations = {
 	.release	= dcache_dir_close,
 	.read		= generic_read_dir,
 	.readdir	= dcache_readdir,
+	.llseek		= dcache_dir_lseek,
 };
 
 const struct inode_operations autofs4_indirect_root_inode_operations = {
diff --git a/fs/befs/linuxvfs.c b/fs/befs/linuxvfs.c
index 02c6e62b72f..740f53672a8 100644
--- a/fs/befs/linuxvfs.c
+++ b/fs/befs/linuxvfs.c
@@ -66,6 +66,7 @@ static struct kmem_cache *befs_inode_cachep;
 static const struct file_operations befs_dir_operations = {
 	.read		= generic_read_dir,
 	.readdir	= befs_readdir,
+	.llseek		= generic_file_llseek,
 };
 
 static const struct inode_operations befs_dir_inode_operations = {
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 5f60363b934..5311c1acdd4 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -475,6 +475,7 @@ const struct file_operations xfs_invis_file_operations = {
 const struct file_operations xfs_dir_file_operations = {
 	.read		= generic_read_dir,
 	.readdir	= xfs_file_readdir,
+	.llseek		= generic_file_llseek,
 	.unlocked_ioctl	= xfs_file_ioctl,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl	= xfs_file_compat_ioctl,
-- 
GitLab


From 4cdfe84b51420c9ac95c7133da2d4c8a191094af Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun, 24 Aug 2008 07:45:33 -0400
Subject: [PATCH 370/869] [PATCH] deal with the first call of ->show()
 generating no output

seq_read() has a subtle bug - we want the first loop there to go
until at least one *non-empty* record had fit entirely into buffer.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 fs/seq_file.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/fs/seq_file.c b/fs/seq_file.c
index 5d54205e486..bd20f7f5a93 100644
--- a/fs/seq_file.c
+++ b/fs/seq_file.c
@@ -108,9 +108,9 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 			goto Done;
 	}
 	/* we need at least one record in buffer */
+	pos = m->index;
+	p = m->op->start(m, &pos);
 	while (1) {
-		pos = m->index;
-		p = m->op->start(m, &pos);
 		err = PTR_ERR(p);
 		if (!p || IS_ERR(p))
 			break;
@@ -119,6 +119,11 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 			break;
 		if (unlikely(err))
 			m->count = 0;
+		if (unlikely(!m->count)) {
+			p = m->op->next(m, p, &pos);
+			m->index = pos;
+			continue;
+		}
 		if (m->count < m->size)
 			goto Fill;
 		m->op->stop(m, p);
@@ -128,6 +133,8 @@ ssize_t seq_read(struct file *file, char __user *buf, size_t size, loff_t *ppos)
 			goto Enomem;
 		m->count = 0;
 		m->version = 0;
+		pos = m->index;
+		p = m->op->start(m, &pos);
 	}
 	m->op->stop(m, p);
 	m->count = 0;
-- 
GitLab


From c5d44423d55e3abca7b1d544af9e4c97ec203999 Mon Sep 17 00:00:00 2001
From: Travis Place <wishie@wishie.net>
Date: Mon, 25 Aug 2008 08:11:50 +0200
Subject: [PATCH 371/869] ALSA: CA0106 on MSI K8N Diamond PLUS Motherboard

Correct a previous patch for the ca0106 onboard the MSI K8N Diamond PLUS
motherboard. Confirmed to have Line/Mic/Aux working for input, and sound
output working as expected.

Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/ca0106/ca0106_main.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 2f8b28add27..03a274becae 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -249,11 +249,12 @@ static struct snd_ca0106_details ca0106_chip_details[] = {
 	   .name   = "MSI K8N Diamond MB [SB0438]",
 	   .gpio_type = 2,
 	   .i2c_adc = 1 } ,
-	 /* Another MSI K8N Diamond MB, which has apprently a different SSID */
+	 /* MSI K8N Diamond PLUS MB */
 	 { .serial = 0x10091102,
 	   .name   = "MSI K8N Diamond MB",
 	   .gpio_type = 2,
-	   .i2c_adc = 1 } ,
+	   .i2c_adc = 1,
+	   .spi_dac = 2 }
 	 /* Shuttle XPC SD31P which has an onboard Creative Labs
 	  * Sound Blaster Live! 24-bit EAX
 	  * high-definition 7.1 audio processor".
-- 
GitLab


From a2bd7274b47124d2fc4dfdb8c0591f545ba749dd Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Mon, 25 Aug 2008 00:56:08 -0700
Subject: [PATCH 372/869] x86: fix HPET regression in 2.6.26 versus 2.6.25,
 check hpet against BAR, v3

David Witbrodt tracked down (and bisected) a hpet bootup hang on his
system to the following problem: a BIOS bug made the hpet device
visible as a generic PCI device. If e820 reserved entries happen to
be registered first in the resource tree [which v2.6.26 started doing],
then the PCI code will reallocate that device's BAR to some other
address - breaking timer IRQs and hanging the system.

( Normally hpet devices are hidden by the BIOS from the OS's PCI
  discovery via chipset magic. Sometimes the hpet is not a PCI device
  at all. )

Solve this fundamental fragility by making non-PCI platform drivers
insert resources into the resource tree even if it overlaps the e820
reserved entry, to keep the resource manager from updating the BAR.

Also do these checks for the ioapic and mmconfig addresses, and emit
a warning if this happens.

Bisected-by: David Witbrodt <dawitbro@sbcglobal.net>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Tested-by: David Witbrodt <dawitbro@sbcglobal.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/pci/i386.c | 78 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 78 insertions(+)

diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 5807d1bc73f..d765da91384 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -31,8 +31,11 @@
 #include <linux/ioport.h>
 #include <linux/errno.h>
 #include <linux/bootmem.h>
+#include <linux/acpi.h>
 
 #include <asm/pat.h>
+#include <asm/hpet.h>
+#include <asm/io_apic.h>
 
 #include "pci.h"
 
@@ -77,6 +80,77 @@ pcibios_align_resource(void *data, struct resource *res,
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
+static int check_res_with_valid(struct pci_dev *dev, struct resource *res)
+{
+	unsigned long base;
+	unsigned long size;
+	int i;
+
+	base = res->start;
+	size = (res->start == 0 && res->end == res->start) ? 0 :
+		 (res->end - res->start + 1);
+
+	if (!base || !size)
+		return 0;
+
+#ifdef CONFIG_HPET_TIMER
+	/* for hpet */
+	if (base == hpet_address && (res->flags & IORESOURCE_MEM)) {
+		dev_info(&dev->dev, "BAR has HPET at %08lx-%08lx\n",
+				 base, base + size - 1);
+		return 1;
+	}
+#endif
+
+#ifdef CONFIG_X86_IO_APIC
+	for (i = 0; i < nr_ioapics; i++) {
+		unsigned long ioapic_phys = mp_ioapics[i].mp_apicaddr;
+
+		if (base == ioapic_phys && (res->flags & IORESOURCE_MEM)) {
+			dev_info(&dev->dev, "BAR has ioapic at %08lx-%08lx\n",
+					 base, base + size - 1);
+			return 1;
+		}
+	}
+#endif
+
+#ifdef CONFIG_PCI_MMCONFIG
+	for (i = 0; i < pci_mmcfg_config_num; i++) {
+		unsigned long addr;
+
+		addr = pci_mmcfg_config[i].address;
+		if (base == addr && (res->flags & IORESOURCE_MEM)) {
+			dev_info(&dev->dev, "BAR has MMCONFIG at %08lx-%08lx\n",
+					 base, base + size - 1);
+			return 1;
+		}
+	}
+#endif
+
+	return 0;
+}
+
+static int check_platform(struct pci_dev *dev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	/*
+	 * forcibly insert it into the
+	 * resource tree
+	 */
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+	else if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+
+	if (root && check_res_with_valid(dev, res)) {
+		insert_resource(root, res);
+
+		return 1;
+	}
+
+	return 0;
+}
 /*
  *  Handle resources of PCI devices.  If the world were perfect, we could
  *  just allocate all the resource regions and do nothing more.  It isn't.
@@ -128,6 +202,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				pr = pci_find_parent_resource(dev, r);
 				if (!r->start || !pr ||
 				    request_resource(pr, r) < 0) {
+					if (check_platform(dev, r))
+						continue;
 					dev_err(&dev->dev, "BAR %d: can't "
 						"allocate resource\n", idx);
 					/*
@@ -171,6 +247,8 @@ static void __init pcibios_allocate_resources(int pass)
 					r->flags, disabled, pass);
 				pr = pci_find_parent_resource(dev, r);
 				if (!pr || request_resource(pr, r) < 0) {
+					if (check_platform(dev, r))
+						continue;
 					dev_err(&dev->dev, "BAR %d: can't "
 						"allocate resource\n", idx);
 					/* We'll assign a new address later */
-- 
GitLab


From ceac2651e9b7b77734d1c2b6f5d7d218d22f5427 Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Mon, 25 Aug 2008 17:39:11 +0800
Subject: [PATCH 373/869] Blackfin arch: Add MTD Partitions for MTD_DATAFLASH,
 increase max SPI SCLK

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-bf537/boards/stamp.c | 27 ++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)

diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index e93964fdb43..8482d22321f 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -584,6 +584,30 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 
 #if defined(CONFIG_MTD_DATAFLASH) \
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
+
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0xe0000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+	.name = "SPI Dataflash",
+	.parts = bfin_spi_dataflash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+};
+
 /* DataFlash chip */
 static struct bfin5xx_spi_chip data_flash_chip_info = {
 	.enable_dma = 0,         /* use dma transfer with this chip*/
@@ -609,9 +633,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 	|| defined(CONFIG_MTD_DATAFLASH_MODULE)
 	{	/* DataFlash chip */
 		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0, /* Framework bus number */
 		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_dataflash_data,
 		.controller_data = &data_flash_chip_info,
 		.mode = SPI_MODE_3,
 	},
-- 
GitLab


From d70536ec3ad68474f5b093bcbcc8c5b6ba50831b Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Mon, 25 Aug 2008 17:37:35 +0800
Subject: [PATCH 374/869] Blackfin arch: dont actually need to muck with
 EMAC_SYSTAT for BF52x for demuxing

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mach-common/ints-priority.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 62f8883a5c2..6dac86995d1 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -983,7 +983,7 @@ int __init init_arch_irq(void)
 
 	local_irq_disable();
 
-#if defined(CONFIG_BF527) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
+#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
 	/* Clear EMAC Interrupt Status bits so we can demux it later */
 	bfin_write_EMAC_SYSTAT(-1);
 #endif
-- 
GitLab


From 225f7e1eb56ad054c328ae1b11601ea4de7488ba Mon Sep 17 00:00:00 2001
From: Sonic Zhang <sonic.zhang@analog.com>
Date: Mon, 25 Aug 2008 18:00:45 +0800
Subject: [PATCH 375/869] Blackfin arch: Fix bug - when to rmmod the L1_module,
 it stucks and then reboot the board.

Fix this by correcting the wrong pointer

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mm/blackfin_sram.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index 9d2be43ac3d..1ed1b15a391 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -335,7 +335,7 @@ static int _sram_free(const void *addr,
 		plast->size += pavail->size;
 		kmem_cache_free(sram_piece_cache, pavail);
 	} else {
-		pavail->next = plast;
+		pavail->next = plast->next;
 		plast->next = pavail;
 		plast = pavail;
 	}
-- 
GitLab


From de82ff783bcb2b52353a7c99b4a8524ae739da73 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Fri, 22 Aug 2008 09:47:17 -0600
Subject: [PATCH 376/869] PNPACPI: ignore the producer/consumer bit for
 extended IRQ descriptors

The Extended Interrupt descriptor has a producer/consumer bit, but
it's not clear what that would mean, and existing BIOSes use the bit
inconsistently.  This patch makes Linux PNPACPI ignore the bit.

The ACPI spec contains examples of PCI Interrupt Link devices marked
as ResourceProducers, but many BIOSes mark them as ResourceConsumers.

I also checked with a Windows contact, who said:

    Windows uses only "resource consumer" when dealing with
    interrupts.  There's no useful way of looking at a resource
    producer of interrupts.

    ... NT-based Windows largely infers the producer/consumer stuff
    from the device type and ignores the bits in the namespace.  This
    was necessary because Windows 98 ignored them and early namespaces
    contained random junk.

The reason I want to change this is because if PNPACPI devices exclude
ResourceProducer IRQ resources, we can't write PNP drivers for those
devices.

For example, on machines such as the the HP rx7620, rx7640, rx8620,
rx8640, and Superdome, HPET interrupts are ResourceProducers.  The
HPET driver currently has to use acpi_bus_register_driver() and do its
own _CRS parsing, even though it requires absolutely no ACPI-specific
functionality.

It would be better if the HPET driver were a PNP driver and took
advantage of the _CRS parsing built into PNPACPI.

This producer/consumer check was originally added here:
    http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=2b8de5f50e4a302b83ebcd5b0120621336d50bd6

to fix this bug:
    http://bugzilla.kernel.org/show_bug.cgi?id=6292

However, the bug was related only to memory and I/O port resources,
where the distinction is sensible and important to Linux.  Given that
the distinction is muddled for IRQ resources, I think it was a mistake
to add the check there.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/pnp/pnpacpi/rsparser.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index d7e9f2152df..95015cbfd33 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -405,8 +405,6 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res,
 
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
 		extended_irq = &res->data.extended_irq;
-		if (extended_irq->producer_consumer == ACPI_PRODUCER)
-			return AE_OK;
 
 		if (extended_irq->interrupt_count == 0)
 			pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED);
-- 
GitLab


From 3d9b7a5ce534f3963afcf8f4777267e5899fe007 Mon Sep 17 00:00:00 2001
From: Bernd Schmidt <bernds_cb1@t-online.de>
Date: Mon, 25 Aug 2008 18:41:15 +0800
Subject: [PATCH 377/869] Blackfin arch: fix bug - MPU crashes under stress

Bug Description:
a customer reported under IRQ stress, running applications may
wrongly trigger an ICPLB miss and be killed. after playing a
bit more, here's a test case that may be triggering the same bug.

Fixing:
After modifying page protections, only modify the active CPLBs if the
protection change was made for the active mm.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 include/asm-blackfin/mmu_context.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/asm-blackfin/mmu_context.h b/include/asm-blackfin/mmu_context.h
index f55ec3c23a9..8529552a981 100644
--- a/include/asm-blackfin/mmu_context.h
+++ b/include/asm-blackfin/mmu_context.h
@@ -173,8 +173,10 @@ static inline void protect_page(struct mm_struct *mm, unsigned long addr,
 
 static inline void update_protections(struct mm_struct *mm)
 {
-	flush_switched_cplbs();
-	set_mask_dcplbs(mm->context.page_rwx_mask);
+	if (mm->context.page_rwx_mask == current_rwx_mask) {
+		flush_switched_cplbs();
+		set_mask_dcplbs(mm->context.page_rwx_mask);
+	}
 }
 #endif
 
-- 
GitLab


From 761e29f3bb19b05bea55285dfdf2d28e001a63b8 Mon Sep 17 00:00:00 2001
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
Date: Wed, 20 Aug 2008 16:32:40 +0300
Subject: [PATCH 378/869] UBIFS: always read hashed-key nodes under TNC mutex

Leaf-nodes that have a hashed key are stored in the
leaf-node-cache (LNC) which is protected by the TNC
mutex.  Consequently, when reading a leaf node with
a hashed key (i.e. directory entries, xattr entries)
the TNC mutex is always required.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
---
 fs/ubifs/tnc.c | 7 +------
 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c
index e909f4a9644..4fbc5921688 100644
--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -1498,7 +1498,6 @@ static int do_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
 {
 	int found, n, err;
 	struct ubifs_znode *znode;
-	struct ubifs_zbranch zbr;
 
 	dbg_tnc("name '%.*s' key %s", nm->len, nm->name, DBGKEY(key));
 	mutex_lock(&c->tnc_mutex);
@@ -1522,11 +1521,7 @@ static int do_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
 		goto out_unlock;
 	}
 
-	zbr = znode->zbranch[n];
-	mutex_unlock(&c->tnc_mutex);
-
-	err = tnc_read_node_nm(c, &zbr, node);
-	return err;
+	err = tnc_read_node_nm(c, &znode->zbranch[n], node);
 
 out_unlock:
 	mutex_unlock(&c->tnc_mutex);
-- 
GitLab


From 601c0bc46753007be011b513ba4fc50ed8e30aef Mon Sep 17 00:00:00 2001
From: Adrian Hunter <ext-adrian.hunter@nokia.com>
Date: Fri, 22 Aug 2008 14:23:35 +0300
Subject: [PATCH 379/869] UBIFS: allow for racing between GC and TNC

The TNC mutex is unlocked prematurely when reading leaf nodes
with non-hashed keys.  This is unsafe because the node may be
moved by garbage collection and the eraseblock unmapped, although
that has never actually happened during stress testing.

This patch fixes the flaw by detecting the race and retrying with
the TNC mutex locked.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
---
 fs/ubifs/gc.c    |   6 +++
 fs/ubifs/misc.h  |  17 ++++++++
 fs/ubifs/tnc.c   | 109 ++++++++++++++++++++++++++---------------------
 fs/ubifs/ubifs.h |   6 ++-
 4 files changed, 87 insertions(+), 51 deletions(-)

diff --git a/fs/ubifs/gc.c b/fs/ubifs/gc.c
index d0f3dac2908..13f1019c859 100644
--- a/fs/ubifs/gc.c
+++ b/fs/ubifs/gc.c
@@ -344,6 +344,12 @@ int ubifs_garbage_collect_leb(struct ubifs_info *c, struct ubifs_lprops *lp)
 		if (err)
 			goto out;
 
+		/* Allow for races with TNC */
+		c->gced_lnum = lnum;
+		smp_wmb();
+		c->gc_seq += 1;
+		smp_wmb();
+
 		if (c->gc_lnum == -1) {
 			c->gc_lnum = lnum;
 			err = LEB_RETAINED;
diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h
index 87dabf9fe74..87ced4c74a6 100644
--- a/fs/ubifs/misc.h
+++ b/fs/ubifs/misc.h
@@ -325,4 +325,21 @@ static inline struct timespec ubifs_current_time(struct inode *inode)
 		current_fs_time(inode->i_sb) : CURRENT_TIME_SEC;
 }
 
+/**
+ * ubifs_tnc_lookup - look up a file-system node.
+ * @c: UBIFS file-system description object
+ * @key: node key to lookup
+ * @node: the node is returned here
+ *
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure.
+ */
+static inline int ubifs_tnc_lookup(struct ubifs_info *c,
+				   const union ubifs_key *key, void *node)
+{
+	return ubifs_tnc_locate(c, key, node, NULL, NULL);
+}
+
 #endif /* __UBIFS_MISC_H__ */
diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c
index 4fbc5921688..7da209ab937 100644
--- a/fs/ubifs/tnc.c
+++ b/fs/ubifs/tnc.c
@@ -506,7 +506,7 @@ static int fallible_read_node(struct ubifs_info *c, const union ubifs_key *key,
 		if (keys_cmp(c, key, &node_key) != 0)
 			ret = 0;
 	}
-	if (ret == 0)
+	if (ret == 0 && c->replaying)
 		dbg_mnt("dangling branch LEB %d:%d len %d, key %s",
 			zbr->lnum, zbr->offs, zbr->len, DBGKEY(key));
 	return ret;
@@ -1382,50 +1382,39 @@ static int lookup_level0_dirty(struct ubifs_info *c, const union ubifs_key *key,
 }
 
 /**
- * ubifs_tnc_lookup - look up a file-system node.
+ * maybe_leb_gced - determine if a LEB may have been garbage collected.
  * @c: UBIFS file-system description object
- * @key: node key to lookup
- * @node: the node is returned here
+ * @lnum: LEB number
+ * @gc_seq1: garbage collection sequence number
  *
- * This function look up and reads node with key @key. The caller has to make
- * sure the @node buffer is large enough to fit the node. Returns zero in case
- * of success, %-ENOENT if the node was not found, and a negative error code in
- * case of failure.
+ * This function determines if @lnum may have been garbage collected since
+ * sequence number @gc_seq1. If it may have been then %1 is returned, otherwise
+ * %0 is returned.
  */
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
-		     void *node)
+static int maybe_leb_gced(struct ubifs_info *c, int lnum, int gc_seq1)
 {
-	int found, n, err;
-	struct ubifs_znode *znode;
-	struct ubifs_zbranch zbr, *zt;
-
-	mutex_lock(&c->tnc_mutex);
-	found = ubifs_lookup_level0(c, key, &znode, &n);
-	if (!found) {
-		err = -ENOENT;
-		goto out;
-	} else if (found < 0) {
-		err = found;
-		goto out;
-	}
-	zt = &znode->zbranch[n];
-	if (is_hash_key(c, key)) {
-		/*
-		 * In this case the leaf node cache gets used, so we pass the
-		 * address of the zbranch and keep the mutex locked
-		 */
-		err = tnc_read_node_nm(c, zt, node);
-		goto out;
-	}
-	zbr = znode->zbranch[n];
-	mutex_unlock(&c->tnc_mutex);
-
-	err = ubifs_tnc_read_node(c, &zbr, node);
-	return err;
+	int gc_seq2, gced_lnum;
 
-out:
-	mutex_unlock(&c->tnc_mutex);
-	return err;
+	gced_lnum = c->gced_lnum;
+	smp_rmb();
+	gc_seq2 = c->gc_seq;
+	/* Same seq means no GC */
+	if (gc_seq1 == gc_seq2)
+		return 0;
+	/* Different by more than 1 means we don't know */
+	if (gc_seq1 + 1 != gc_seq2)
+		return 1;
+	/*
+	 * We have seen the sequence number has increased by 1. Now we need to
+	 * be sure we read the right LEB number, so read it again.
+	 */
+	smp_rmb();
+	if (gced_lnum != c->gced_lnum)
+		return 1;
+	/* Finally we can check lnum */
+	if (gced_lnum == lnum)
+		return 1;
+	return 0;
 }
 
 /**
@@ -1436,16 +1425,19 @@ out:
  * @lnum: LEB number is returned here
  * @offs: offset is returned here
  *
- * This function is the same as 'ubifs_tnc_lookup()' but it returns the node
- * location also. See 'ubifs_tnc_lookup()'.
+ * This function look up and reads node with key @key. The caller has to make
+ * sure the @node buffer is large enough to fit the node. Returns zero in case
+ * of success, %-ENOENT if the node was not found, and a negative error code in
+ * case of failure. The node location can be returned in @lnum and @offs.
  */
 int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
 		     void *node, int *lnum, int *offs)
 {
-	int found, n, err;
+	int found, n, err, safely = 0, gc_seq1;
 	struct ubifs_znode *znode;
 	struct ubifs_zbranch zbr, *zt;
 
+again:
 	mutex_lock(&c->tnc_mutex);
 	found = ubifs_lookup_level0(c, key, &znode, &n);
 	if (!found) {
@@ -1456,24 +1448,43 @@ int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
 		goto out;
 	}
 	zt = &znode->zbranch[n];
+	if (lnum) {
+		*lnum = zt->lnum;
+		*offs = zt->offs;
+	}
 	if (is_hash_key(c, key)) {
 		/*
 		 * In this case the leaf node cache gets used, so we pass the
 		 * address of the zbranch and keep the mutex locked
 		 */
-		*lnum = zt->lnum;
-		*offs = zt->offs;
 		err = tnc_read_node_nm(c, zt, node);
 		goto out;
 	}
+	if (safely) {
+		err = ubifs_tnc_read_node(c, zt, node);
+		goto out;
+	}
+	/* Drop the TNC mutex prematurely and race with garbage collection */
 	zbr = znode->zbranch[n];
+	gc_seq1 = c->gc_seq;
 	mutex_unlock(&c->tnc_mutex);
 
-	*lnum = zbr.lnum;
-	*offs = zbr.offs;
+	if (ubifs_get_wbuf(c, zbr.lnum)) {
+		/* We do not GC journal heads */
+		err = ubifs_tnc_read_node(c, &zbr, node);
+		return err;
+	}
 
-	err = ubifs_tnc_read_node(c, &zbr, node);
-	return err;
+	err = fallible_read_node(c, key, &zbr, node);
+	if (maybe_leb_gced(c, zbr.lnum, gc_seq1)) {
+		/*
+		 * The node may have been GC'ed out from under us so try again
+		 * while keeping the TNC mutex locked.
+		 */
+		safely = 1;
+		goto again;
+	}
+	return 0;
 
 out:
 	mutex_unlock(&c->tnc_mutex);
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index d7f706f7a30..7828d69ca4f 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -1028,6 +1028,8 @@ struct ubifs_mount_opts {
  * @sbuf: a buffer of LEB size used by GC and replay for scanning
  * @idx_gc: list of index LEBs that have been garbage collected
  * @idx_gc_cnt: number of elements on the idx_gc list
+ * @gc_seq: incremented for every non-index LEB garbage collected
+ * @gced_lnum: last non-index LEB that was garbage collected
  *
  * @infos_list: links all 'ubifs_info' objects
  * @umount_mutex: serializes shrinker and un-mount
@@ -1257,6 +1259,8 @@ struct ubifs_info {
 	void *sbuf;
 	struct list_head idx_gc;
 	int idx_gc_cnt;
+	volatile int gc_seq;
+	volatile int gced_lnum;
 
 	struct list_head infos_list;
 	struct mutex umount_mutex;
@@ -1451,8 +1455,6 @@ int ubifs_save_dirty_idx_lnums(struct ubifs_info *c);
 /* tnc.c */
 int ubifs_lookup_level0(struct ubifs_info *c, const union ubifs_key *key,
 			struct ubifs_znode **zn, int *n);
-int ubifs_tnc_lookup(struct ubifs_info *c, const union ubifs_key *key,
-		     void *node);
 int ubifs_tnc_lookup_nm(struct ubifs_info *c, const union ubifs_key *key,
 			void *node, const struct qstr *nm);
 int ubifs_tnc_locate(struct ubifs_info *c, const union ubifs_key *key,
-- 
GitLab


From 3051e41ab7daaa59d4564f20b25dcb8c03f35f2b Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Mon, 25 Aug 2008 11:49:20 +0100
Subject: [PATCH 380/869] ALSA: ASoC: Fix double free and memory leak in many
 codec drivers

Many SoC audio codec drivers have improper freeing of memory in error
paths.

* codec is allocated in the platform device probe function, but is not
  freed there in case of error. Instead it is freed in the i2c device
  probe function's error path. However the success or failure of both
  functions is not linked, so this could result in a double free (if
  the platform device is successfully probed, the i2c device probing
  fails and then the platform driver is unregistered.)

* codec->private_data is allocated in many platform device probe
  functions but not freed in their error paths.

This patch hopefully solves all these problems.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/codecs/ak4535.c      | 11 +++++++----
 sound/soc/codecs/tlv320aic3x.c | 11 +++++++----
 sound/soc/codecs/uda1380.c     |  9 +++++----
 sound/soc/codecs/wm8510.c      |  9 +++++----
 sound/soc/codecs/wm8731.c      | 11 +++++++----
 sound/soc/codecs/wm8750.c      | 10 ++++++----
 sound/soc/codecs/wm8753.c      | 11 +++++++----
 sound/soc/codecs/wm8990.c      | 11 +++++++----
 8 files changed, 51 insertions(+), 32 deletions(-)

diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c
index b26003c4f3e..7da9f467b7b 100644
--- a/sound/soc/codecs/ak4535.c
+++ b/sound/soc/codecs/ak4535.c
@@ -562,10 +562,9 @@ static int ak4535_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -583,7 +582,6 @@ static int ak4535_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -660,6 +658,11 @@ static int ak4535_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index b1dce5f459d..5f9abb19943 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1199,10 +1199,9 @@ static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -1221,7 +1220,6 @@ static int aic3x_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -1302,6 +1300,11 @@ static int aic3x_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c
index a52d6d9e007..807318fbdc8 100644
--- a/sound/soc/codecs/uda1380.c
+++ b/sound/soc/codecs/uda1380.c
@@ -729,10 +729,9 @@ static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -750,7 +749,6 @@ static int uda1380_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -817,6 +815,9 @@ static int uda1380_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0)
+		kfree(codec);
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 67325fd9544..3d998e6a997 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -693,10 +693,9 @@ static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -714,7 +713,6 @@ static int wm8510_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -782,6 +780,9 @@ static int wm8510_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0)
+		kfree(codec);
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 369d39c3f74..9402fcaf04f 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -596,10 +596,9 @@ static int wm8731_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -617,7 +616,6 @@ static int wm8731_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -693,6 +691,11 @@ static int wm8731_probe(struct platform_device *pdev)
 #else
 	/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8750.c b/sound/soc/codecs/wm8750.c
index c6a8edf302a..dd1f55404b2 100644
--- a/sound/soc/codecs/wm8750.c
+++ b/sound/soc/codecs/wm8750.c
@@ -869,10 +869,9 @@ static int wm8750_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -890,7 +889,6 @@ static int wm8750_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -966,6 +964,10 @@ static int wm8750_probe(struct platform_device *pdev)
 		/* Add other interfaces here */
 #endif
 
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index 8604809f0c3..35bf1c36987 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -1661,10 +1661,9 @@ static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c =  kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (!i2c) {
-		kfree(codec);
+	if (!i2c)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -1683,7 +1682,6 @@ static int wm8753_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -1760,6 +1758,11 @@ static int wm8753_probe(struct platform_device *pdev)
 #else
 		/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index e44153fa38d..dd995ef448b 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -1500,10 +1500,9 @@ static int wm8990_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	client_template.addr = addr;
 
 	i2c =  kmemdup(&client_template, sizeof(client_template), GFP_KERNEL);
-	if (i2c == NULL) {
-		kfree(codec);
+	if (i2c == NULL)
 		return -ENOMEM;
-	}
+
 	i2c_set_clientdata(i2c, codec);
 	codec->control_data = i2c;
 
@@ -1521,7 +1520,6 @@ static int wm8990_codec_probe(struct i2c_adapter *adap, int addr, int kind)
 	return ret;
 
 err:
-	kfree(codec);
 	kfree(i2c);
 	return ret;
 }
@@ -1595,6 +1593,11 @@ static int wm8990_probe(struct platform_device *pdev)
 #else
 		/* Add other interfaces here */
 #endif
+
+	if (ret != 0) {
+		kfree(codec->private_data);
+		kfree(codec);
+	}
 	return ret;
 }
 
-- 
GitLab


From 52a8968ce95da8469ba0a9b3e4010fe31caf77a3 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <peterz@infradead.org>
Date: Mon, 25 Aug 2008 13:35:06 +0200
Subject: [PATCH 381/869] x86: fix cpufreq + sched_clock() regression

I noticed that my sched_clock() was slow on a number of machine, so I
started looking at cpufreq.

The below seems to fix the problem for me.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/tsc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 9bed5cae4bd..8e786b0d665 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -314,7 +314,7 @@ static int time_cpufreq_notifier(struct notifier_block *nb, unsigned long val,
 			mark_tsc_unstable("cpufreq changes");
 	}
 
-	set_cyc2ns_scale(tsc_khz_ref, freq->cpu);
+	set_cyc2ns_scale(tsc_khz, freq->cpu);
 
 	return 0;
 }
-- 
GitLab


From 532a6086e35fa3b5761e68af36d4e42a550eba15 Mon Sep 17 00:00:00 2001
From: Anthony Liguori <aliguori@us.ibm.com>
Date: Mon, 18 Aug 2008 17:15:31 -0500
Subject: [PATCH 382/869] virtio_balloon: fix towards_target when deflating
 balloon

Both v and vb->num_pages are u32 and unsigned int respectively.  If v is less
than vb->num_pages (and it is, when deflating the balloon), the result is a
very large 32-bit number.  Since we're returning a s64, instead of getting the
same negative number we desire, we get a very large positive number.

This handles the case where v < vb->num_pages and ensures we get a small,
negative, s64 as the result.

Rusty: please push this for 2.6.27-rc4.  It's probably appropriate for the
stable tree too as it will cause an unexpected OOM when ballooning.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (simplified)
---
 drivers/virtio/virtio_balloon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index bfef604160d..62eab43152d 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -158,7 +158,7 @@ static inline s64 towards_target(struct virtio_balloon *vb)
 	vb->vdev->config->get(vb->vdev,
 			      offsetof(struct virtio_balloon_config, num_pages),
 			      &v, sizeof(v));
-	return v - vb->num_pages;
+	return (s64)v - vb->num_pages;
 }
 
 static void update_balloon_size(struct virtio_balloon *vb)
-- 
GitLab


From 37a7c0f3e3e808b8d24f2187a25d2de39e46d822 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Tue, 26 Aug 2008 00:19:26 -0500
Subject: [PATCH 383/869] stop_machine: wean Xen off stop_machine_run

This is the last use of (the deprecated) stop_machine_run in the tree.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/xen/manage.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index a5bc91ae6ff..d0e87cbe157 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -102,7 +102,7 @@ static void do_suspend(void)
 	/* XXX use normal device tree? */
 	xenbus_suspend();
 
-	err = stop_machine_run(xen_suspend, &cancelled, 0);
+	err = stop_machine(xen_suspend, &cancelled, &cpumask_of_cpu(0));
 	if (err) {
 		printk(KERN_ERR "failed to start xen_suspend: %d\n", err);
 		goto out;
-- 
GitLab


From bf2002967775cbb233876d51ff94e8daa7e77858 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Tue, 26 Aug 2008 00:19:27 -0500
Subject: [PATCH 384/869] stop_machine: Remove deprecated stop_machine_run

Everyone should be using stop_machine() now.  The staged API
transition helped life in linux-next.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 include/linux/stop_machine.h | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/include/linux/stop_machine.h b/include/linux/stop_machine.h
index f1cb0ba6d71..faf1519b5ad 100644
--- a/include/linux/stop_machine.h
+++ b/include/linux/stop_machine.h
@@ -3,16 +3,13 @@
 /* "Bogolock": stop the entire machine, disable interrupts.  This is a
    very heavy lock, which is equivalent to grabbing every spinlock
    (and more).  So the "read" side to such a lock is anything which
-   diables preeempt. */
+   disables preeempt. */
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <asm/system.h>
 
 #if defined(CONFIG_STOP_MACHINE) && defined(CONFIG_SMP)
 
-/* Deprecated, but useful for transition. */
-#define ALL_CPUS ~0U
-
 /**
  * stop_machine: freeze the machine on all CPUs and run this function
  * @fn: the function to run
@@ -50,18 +47,4 @@ static inline int stop_machine(int (*fn)(void *), void *data,
 	return ret;
 }
 #endif /* CONFIG_SMP */
-
-static inline int __deprecated stop_machine_run(int (*fn)(void *), void *data,
-						unsigned int cpu)
-{
-	/* If they don't care which cpu fn runs on, just pick one. */
-	if (cpu == NR_CPUS)
-		return stop_machine(fn, data, NULL);
-	else if (cpu == ~0U)
-		return stop_machine(fn, data, &cpu_possible_map);
-	else {
-		cpumask_t cpus = cpumask_of_cpu(cpu);
-		return stop_machine(fn, data, &cpus);
-	}
-}
 #endif /* _LINUX_STOP_MACHINE */
-- 
GitLab


From 1dc3e3bcbfe335843ec938bfdddb34d10f4dd278 Mon Sep 17 00:00:00 2001
From: Rusty Russell <rusty@rustcorp.com.au>
Date: Tue, 26 Aug 2008 00:19:27 -0500
Subject: [PATCH 385/869] lguest: update commentry

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
 Documentation/lguest/lguest.c  | 8 ++++++++
 drivers/lguest/lguest_device.c | 8 ++++++++
 2 files changed, 16 insertions(+)

diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 655414821ed..7228369d101 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -895,6 +895,9 @@ static void handle_console_output(int fd, struct virtqueue *vq, bool timeout)
 	}
 }
 
+/* This is called when we no longer want to hear about Guest changes to a
+ * virtqueue.  This is more efficient in high-traffic cases, but it means we
+ * have to set a timer to check if any more changes have occurred. */
 static void block_vq(struct virtqueue *vq)
 {
 	struct itimerval itm;
@@ -939,6 +942,11 @@ static void handle_net_output(int fd, struct virtqueue *vq, bool timeout)
 	if (!timeout && num)
 		block_vq(vq);
 
+	/* We never quite know how long should we wait before we check the
+	 * queue again for more packets.  We start at 500 microseconds, and if
+	 * we get fewer packets than last time, we assume we made the timeout
+	 * too small and increase it by 10 microseconds.  Otherwise, we drop it
+	 * by one microsecond every time.  It seems to work well enough. */
 	if (timeout) {
 		if (num < last_timeout_num)
 			timeout_usec += 10;
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 37344aaee22..a661bbdae3d 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -98,6 +98,10 @@ static u32 lg_get_features(struct virtio_device *vdev)
 	return features;
 }
 
+/* The virtio core takes the features the Host offers, and copies the
+ * ones supported by the driver into the vdev->features array.  Once
+ * that's all sorted out, this routine is called so we can tell the
+ * Host which features we understand and accept. */
 static void lg_finalize_features(struct virtio_device *vdev)
 {
 	unsigned int i, bits;
@@ -108,6 +112,10 @@ static void lg_finalize_features(struct virtio_device *vdev)
 	/* Give virtio_ring a chance to accept features. */
 	vring_transport_features(vdev);
 
+	/* The vdev->feature array is a Linux bitmask: this isn't the
+	 * same as a the simple array of bits used by lguest devices
+	 * for features.  So we do this slow, manual conversion which is
+	 * completely general. */
 	memset(out_features, 0, desc->feature_len);
 	bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
 	for (i = 0; i < bits; i++) {
-- 
GitLab


From 18b13e5457041429af3974afd52f647c3a5465dd Mon Sep 17 00:00:00 2001
From: Eduardo Habkost <ehabkost@redhat.com>
Date: Tue, 19 Aug 2008 20:00:08 -0300
Subject: [PATCH 386/869] KVM: Use .fixup instead of .text.fixup on
 __kvm_handle_fault_on_reboot

vmlinux.lds expects the fixup code to be on a section named .fixup. The
.text.fixup section is not mentioned on vmlinux.lds, and is included on
the resulting vmlinux (just after .text) only because of ld heuristics on
placing orphan sections.

However, placing .text.fixup outside .text breaks the definition of
_etext, making it exclude the .text.fixup contents. That makes .text.fixup
be ignored by the kernel initialization code that needs to know about
section locations, such as the code setting page protection bits.

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 include/asm-x86/kvm_host.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h
index 0f3c5311461..c2e34c27590 100644
--- a/include/asm-x86/kvm_host.h
+++ b/include/asm-x86/kvm_host.h
@@ -722,7 +722,7 @@ asmlinkage void kvm_handle_fault_on_reboot(void);
 
 #define __kvm_handle_fault_on_reboot(insn) \
 	"666: " insn "\n\t" \
-	".pushsection .text.fixup, \"ax\" \n" \
+	".pushsection .fixup, \"ax\" \n" \
 	"667: \n\t" \
 	KVM_EX_PUSH " $666b \n\t" \
 	"jmp kvm_handle_fault_on_reboot \n\t" \
-- 
GitLab


From cd5998ebfbc9e6cb44408efa217c15d7eea13675 Mon Sep 17 00:00:00 2001
From: Avi Kivity <avi@qumranet.com>
Date: Fri, 22 Aug 2008 19:19:38 +0300
Subject: [PATCH 387/869] KVM: MMU: Fix torn shadow pte

The shadow code assigns a pte directly in one place, which is nonatomic on
i386 can can cause random memory references.  Fix by using an atomic setter.

Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 arch/x86/kvm/paging_tmpl.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index f72ac1fa35f..4a814bff21f 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -345,7 +345,7 @@ static u64 *FNAME(fetch)(struct kvm_vcpu *vcpu, gva_t addr,
 		shadow_addr = __pa(shadow_page->spt);
 		shadow_pte = shadow_addr | PT_PRESENT_MASK | PT_ACCESSED_MASK
 			| PT_WRITABLE_MASK | PT_USER_MASK;
-		*shadow_ent = shadow_pte;
+		set_shadow_pte(shadow_ent, shadow_pte);
 	}
 
 	mmu_set_spte(vcpu, shadow_ent, access, walker->pte_access & access,
-- 
GitLab


From 1327138e294ffda120a50c8f31d792addb196c79 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 6 Aug 2008 01:36:09 +0300
Subject: [PATCH 388/869] KVM: fix userspace ABI breakage

The following part of commit 9ef621d3be56e1188300476a8102ff54f7b6793f
(KVM: Support mixed endian machines) changed on the size of a struct
that is exported to userspace:

include/linux/kvm.h:

@@ -318,14 +318,14 @@ struct kvm_trace_rec {
 	__u32 vcpu_id;
 	union {
 		struct {
-			__u32 cycle_lo, cycle_hi;
+			__u64 cycle_u64;
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
 		} cycle;
 		struct {
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
 		} nocycle;
 	} u;
-};
+} __attribute__((packed));

Packing a struct was the correct idea, but it packed the wrong struct.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
---
 include/linux/kvm.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 69511f74f91..70a30651cd1 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -320,12 +320,12 @@ struct kvm_trace_rec {
 		struct {
 			__u64 cycle_u64;
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
-		} cycle;
+		} __attribute__((packed)) cycle;
 		struct {
 			__u32 extra_u32[KVM_TRC_EXTRA_MAX];
 		} nocycle;
 	} u;
-} __attribute__((packed));
+};
 
 #define KVMIO 0xAE
 
-- 
GitLab


From d6817cdbd143f87f9d7c59a4c3194091190eeb84 Mon Sep 17 00:00:00 2001
From: Joel Becker <Joel.Becker@oracle.com>
Date: Fri, 22 Aug 2008 14:30:10 -0700
Subject: [PATCH 389/869] ocfs2: Increment the reference count of an
 already-active stack.

The ocfs2_stack_driver_request() function failed to increment the
refcount of an already-active stack.  It only did the increment on the
first reference.  Whoops.

Signed-off-by: Joel Becker <joel.becker@oracle.com>
Tested-by: Marcos Matsunaga <marcos.matsunaga@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
---
 fs/ocfs2/stackglue.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c
index 10e149ae5e3..07f348b8d72 100644
--- a/fs/ocfs2/stackglue.c
+++ b/fs/ocfs2/stackglue.c
@@ -97,13 +97,14 @@ static int ocfs2_stack_driver_request(const char *stack_name,
 		goto out;
 	}
 
-	/* Ok, the stack is pinned */
-	p->sp_count++;
 	active_stack = p;
-
 	rc = 0;
 
 out:
+	/* If we found it, pin it */
+	if (!rc)
+		active_stack->sp_count++;
+
 	spin_unlock(&ocfs2_stack_lock);
 	return rc;
 }
-- 
GitLab


From 2a61812af2e564cba2c8170cf96e1c823210f619 Mon Sep 17 00:00:00 2001
From: Austin Zhang <austin_zhang@linux.intel.com>
Date: Mon, 25 Aug 2008 11:14:51 -0400
Subject: [PATCH 390/869] x86: add X86_FEATURE_XMM4_2 definitions

Added Intel processor SSE4.2 feature flag.

No in-tree user at the moment, but makes the tree-merging life easier
for the crypto tree.

Signed-off-by: Austin Zhang <austin.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/asm-x86/cpufeature.h | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 2f5a792b0ac..762f6a6bc70 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -91,6 +91,7 @@
 #define X86_FEATURE_CX16	(4*32+13) /* CMPXCHG16B */
 #define X86_FEATURE_XTPR	(4*32+14) /* Send Task Priority Messages */
 #define X86_FEATURE_DCA		(4*32+18) /* Direct Cache Access */
+#define X86_FEATURE_XMM4_2	(4*32+20) /* Streaming SIMD Extensions-4.2 */
 
 /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
 #define X86_FEATURE_XSTORE	(5*32+ 2) /* on-CPU RNG present (xstore insn) */
@@ -189,6 +190,7 @@ extern const char * const x86_power_flags[32];
 #define cpu_has_gbpages		boot_cpu_has(X86_FEATURE_GBPAGES)
 #define cpu_has_arch_perfmon	boot_cpu_has(X86_FEATURE_ARCH_PERFMON)
 #define cpu_has_pat		boot_cpu_has(X86_FEATURE_PAT)
+#define cpu_has_xmm4_2		boot_cpu_has(X86_FEATURE_XMM4_2)
 
 #if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
 # define cpu_has_invlpg		1
-- 
GitLab


From 354879bb977e06695993435745f06a0f6d39ce2b Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Mon, 25 Aug 2008 17:15:34 +0200
Subject: [PATCH 391/869] sched_clock: fix cpu_clock()

This patch fixes 3 issues:

a) it removes the dependency on jiffies, because jiffies are incremented
   by a single CPU, and the tick is not synchronized between CPUs. Therefore
   relying on it to calculate a window to clip whacky TSC values doesn't work
   as it can drift around.

   So instead use [GTOD, GTOD+TICK_NSEC) as the window.

b) __update_sched_clock() did (roughly speaking):

   delta = sched_clock() - scd->tick_raw;
   clock += delta;

   Which gives exponential growth, instead of linear.

c) allows the sched_clock_cpu() value to warp the u64 without breaking.

the results are more reliable sched_clock() deltas:

           before       after   sched_clock

cpu_clock: 15750        51312   51488
cpu_clock: 59719        51052   50947
cpu_clock: 15879        51249   51061
cpu_clock: 1            50933   51198
cpu_clock: 1            50931   51039
cpu_clock: 1            51093   50981
cpu_clock: 1            51043   51040
cpu_clock: 1            50959   50938
cpu_clock: 1            50981   51011
cpu_clock: 1            51364   51212
cpu_clock: 1            51219   51273
cpu_clock: 1            51389   51048
cpu_clock: 1            51285   51611
cpu_clock: 1            50964   51137
cpu_clock: 1            50973   50968
cpu_clock: 1            50967   50972
cpu_clock: 1            58910   58485
cpu_clock: 1            51082   51025
cpu_clock: 1            50957   50958
cpu_clock: 1            50958   50957
cpu_clock: 1006128      51128   50971
cpu_clock: 1            51107   51155
cpu_clock: 1            51371   51081
cpu_clock: 1            51104   51365
cpu_clock: 1            51363   51309
cpu_clock: 1            51107   51160
cpu_clock: 1            51139   51100
cpu_clock: 1            51216   51136
cpu_clock: 1            51207   51215
cpu_clock: 1            51087   51263
cpu_clock: 1            51249   51177
cpu_clock: 1            51519   51412
cpu_clock: 1            51416   51255
cpu_clock: 1            51591   51594
cpu_clock: 1            50966   51374
cpu_clock: 1            50966   50966
cpu_clock: 1            51291   50948
cpu_clock: 1            50973   50867
cpu_clock: 1            50970   50970
cpu_clock: 998306       50970   50971
cpu_clock: 1            50971   50970
cpu_clock: 1            50970   50970
cpu_clock: 1            50971   50971
cpu_clock: 1            50970   50970
cpu_clock: 1            51351   50970
cpu_clock: 1            50970   51352
cpu_clock: 1            50971   50970
cpu_clock: 1            50970   50970
cpu_clock: 1            51321   50971
cpu_clock: 1            50974   51324

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_clock.c | 84 ++++++++++++++++++--------------------------
 1 file changed, 34 insertions(+), 50 deletions(-)

diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 204991a0bfa..e8ab096ddfe 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -12,19 +12,17 @@
  *
  * Create a semi stable clock from a mixture of other events, including:
  *  - gtod
- *  - jiffies
  *  - sched_clock()
  *  - explicit idle events
  *
  * We use gtod as base and the unstable clock deltas. The deltas are filtered,
- * making it monotonic and keeping it within an expected window.  This window
- * is set up using jiffies.
+ * making it monotonic and keeping it within an expected window.
  *
  * Furthermore, explicit sleep and wakeup hooks allow us to account for time
  * that is otherwise invisible (TSC gets stopped).
  *
  * The clock: sched_clock_cpu() is monotonic per cpu, and should be somewhat
- * consistent between cpus (never more than 1 jiffies difference).
+ * consistent between cpus (never more than 2 jiffies difference).
  */
 #include <linux/sched.h>
 #include <linux/percpu.h>
@@ -54,7 +52,6 @@ struct sched_clock_data {
 	 */
 	raw_spinlock_t		lock;
 
-	unsigned long		tick_jiffies;
 	u64			tick_raw;
 	u64			tick_gtod;
 	u64			clock;
@@ -75,14 +72,12 @@ static inline struct sched_clock_data *cpu_sdc(int cpu)
 void sched_clock_init(void)
 {
 	u64 ktime_now = ktime_to_ns(ktime_get());
-	unsigned long now_jiffies = jiffies;
 	int cpu;
 
 	for_each_possible_cpu(cpu) {
 		struct sched_clock_data *scd = cpu_sdc(cpu);
 
 		scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
-		scd->tick_jiffies = now_jiffies;
 		scd->tick_raw = 0;
 		scd->tick_gtod = ktime_now;
 		scd->clock = ktime_now;
@@ -91,47 +86,52 @@ void sched_clock_init(void)
 	sched_clock_running = 1;
 }
 
+/*
+ * min,max except they take wrapping into account
+ */
+
+static inline u64 wrap_min(u64 x, u64 y)
+{
+	return (s64)(x - y) < 0 ? x : y;
+}
+
+static inline u64 wrap_max(u64 x, u64 y)
+{
+	return (s64)(x - y) > 0 ? x : y;
+}
+
 /*
  * update the percpu scd from the raw @now value
  *
  *  - filter out backward motion
- *  - use jiffies to generate a min,max window to clip the raw values
+ *  - use the GTOD tick value to create a window to filter crazy TSC values
  */
 static u64 __update_sched_clock(struct sched_clock_data *scd, u64 now)
 {
-	unsigned long now_jiffies = jiffies;
-	long delta_jiffies = now_jiffies - scd->tick_jiffies;
-	u64 clock = scd->clock;
-	u64 min_clock, max_clock;
 	s64 delta = now - scd->tick_raw;
+	u64 clock, min_clock, max_clock;
 
 	WARN_ON_ONCE(!irqs_disabled());
-	min_clock = scd->tick_gtod + delta_jiffies * TICK_NSEC;
 
-	if (unlikely(delta < 0)) {
-		clock++;
-		goto out;
-	}
+	if (unlikely(delta < 0))
+		delta = 0;
 
-	max_clock = min_clock + TICK_NSEC;
+	/*
+	 * scd->clock = clamp(scd->tick_gtod + delta,
+	 * 		      max(scd->tick_gtod, scd->clock),
+	 * 		      scd->tick_gtod + TICK_NSEC);
+	 */
 
-	if (unlikely(clock + delta > max_clock)) {
-		if (clock < max_clock)
-			clock = max_clock;
-		else
-			clock++;
-	} else {
-		clock += delta;
-	}
+	clock = scd->tick_gtod + delta;
+	min_clock = wrap_max(scd->tick_gtod, scd->clock);
+	max_clock = scd->tick_gtod + TICK_NSEC;
 
- out:
-	if (unlikely(clock < min_clock))
-		clock = min_clock;
+	clock = wrap_max(clock, min_clock);
+	clock = wrap_min(clock, max_clock);
 
-	scd->tick_jiffies = now_jiffies;
 	scd->clock = clock;
 
-	return clock;
+	return scd->clock;
 }
 
 static void lock_double_clock(struct sched_clock_data *data1,
@@ -171,7 +171,7 @@ u64 sched_clock_cpu(int cpu)
 		 * larger time as the latest time for both
 		 * runqueues. (this creates monotonic movement)
 		 */
-		if (likely(remote_clock < this_clock)) {
+		if (likely((s64)(remote_clock - this_clock) < 0)) {
 			clock = this_clock;
 			scd->clock = clock;
 		} else {
@@ -207,14 +207,9 @@ void sched_clock_tick(void)
 	now = sched_clock();
 
 	__raw_spin_lock(&scd->lock);
-	__update_sched_clock(scd, now);
-	/*
-	 * update tick_gtod after __update_sched_clock() because that will
-	 * already observe 1 new jiffy; adding a new tick_gtod to that would
-	 * increase the clock 2 jiffies.
-	 */
 	scd->tick_raw = now;
 	scd->tick_gtod = now_gtod;
+	__update_sched_clock(scd, now);
 	__raw_spin_unlock(&scd->lock);
 }
 
@@ -232,18 +227,7 @@ EXPORT_SYMBOL_GPL(sched_clock_idle_sleep_event);
  */
 void sched_clock_idle_wakeup_event(u64 delta_ns)
 {
-	struct sched_clock_data *scd = this_scd();
-
-	/*
-	 * Override the previous timestamp and ignore all
-	 * sched_clock() deltas that occured while we idled,
-	 * and use the PM-provided delta_ns to advance the
-	 * rq clock:
-	 */
-	__raw_spin_lock(&scd->lock);
-	scd->clock += delta_ns;
-	__raw_spin_unlock(&scd->lock);
-
+	sched_clock_tick();
 	touch_softlockup_watchdog();
 }
 EXPORT_SYMBOL_GPL(sched_clock_idle_wakeup_event);
-- 
GitLab


From 5453c1a575df6232f84fad1502b2d559909265cc Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 25 Aug 2008 18:13:26 +0200
Subject: [PATCH 392/869] [S390] Fix linker script.

6360b1fbb4a939efd34fc770c2ebd927c55506e0 ("move BUG_TABLE into RODATA")
causes this build bug (binutils 2.18.50.0.8.20080709, gcc 4.3.1):

  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
s390x-4.3.1-nm: .tmp_vmlinux2: File truncated
No valid symbol.
make: *** [.tmp_kallsyms2.S] Error 1

So fix this.

Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/vmlinux.lds.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 76c1e60c92f..607bd67a18c 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -55,7 +55,7 @@ SECTIONS
 		__start___ex_table = .;
 		*(__ex_table)
 		__stop___ex_table = .;
-	}
+	} :data
 
 	.data : {		/* Data */
 		DATA_DATA
-- 
GitLab


From dbe13d9981e55c60a030d0509acc9a8968b9c5bf Mon Sep 17 00:00:00 2001
From: Heiko Carstens <heiko.carstens@de.ibm.com>
Date: Mon, 25 Aug 2008 18:13:27 +0200
Subject: [PATCH 393/869] [S390] dcss: fix build bug.

Fix this compile bug:

  CC      drivers/s390/block/dcssblk.o
drivers/s390/block/dcssblk.c: In function 'dcssblk_add_store':
drivers/s390/block/dcssblk.c:387: error: implicit declaration of function 'dcssblk_get_segment_by_name'
drivers/s390/block/dcssblk.c:389: error: label 'release_gd' used but not defined
make[1]: *** [drivers/s390/block/dcssblk.o] Error 1
make: *** [drivers/s390/block/] Error 2

Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/block/dcssblk.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c
index db85f1fb131..711b3004b3e 100644
--- a/drivers/s390/block/dcssblk.c
+++ b/drivers/s390/block/dcssblk.c
@@ -384,9 +384,10 @@ dcssblk_add_store(struct device *dev, struct device_attribute *attr, const char
 	 * get minor, add to list
 	 */
 	down_write(&dcssblk_devices_sem);
-	if (dcssblk_get_segment_by_name(local_buf)) {
+	if (dcssblk_get_device_by_name(local_buf)) {
+		up_write(&dcssblk_devices_sem);
 		rc = -EEXIST;
-		goto release_gd;
+		goto unload_seg;
 	}
 	rc = dcssblk_assign_free_minor(dev_info);
 	if (rc) {
-- 
GitLab


From 42aca483ddee8888926d913b660e1dd38d748ba9 Mon Sep 17 00:00:00 2001
From: Robin Holt <holt@sgi.com>
Date: Mon, 28 Jul 2008 20:36:50 -0500
Subject: [PATCH 394/869] [IA64] Fix ia64 build failure when CONFIG_SFC=m

CONFIG_SFC=m uses topology_core_siblings() which, for ia64, expects
cpu_core_map to be exported.  It is not.  This patch exports the needed
symbol.

Maintainers note: This really looks like the wrong thing to do ... it
would be much better for the kernel to export an API to provide
drivers like this with data they need (which in the case of this
driver seems to be an estimate of the effective parallelism available
on the platform).  But x86 has exported this forever ... so go with
the flow until such an API is defined.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/kernel/smpboot.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index b39853a292d..bcea81e432f 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -138,6 +138,7 @@ cpumask_t cpu_possible_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_possible_map);
 
 cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_core_map);
 DEFINE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
 
-- 
GitLab


From ffb4ba76a25ab6c9deeec33e4f58395586ca747c Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 25 Aug 2008 11:10:26 -0700
Subject: [PATCH 395/869] [module] Don't let gcc inline load_module()

'load_module()' is a complex function that contains all the ELF section
logic, and inlining it is utterly insane.  But gcc will do it, simply
because there is only one call-site.  As a result, all the stack space
that is allocated for all the work to load the module will still be
active when we actually call the module init sequence, and the deep call
chain makes stack overflows happen.

And stack overflows are really hard to debug, because they not only
corrupt random pages below the stack, but also corrupt the thread_info
structure that is allocated under the stack.

In this case, Alan Brunelle reported some crazy oopses at bootup, after
loading the processor module that ends up doing complex ACPI stuff and
has quite a deep callchain.  This should fix it, and is the sane thing
to do regardless.

Cc: Alan D. Brunelle <Alan.Brunelle@hp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/module.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/module.c b/kernel/module.c
index 08864d257eb..9db11911e04 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1799,7 +1799,7 @@ static void *module_alloc_update_bounds(unsigned long size)
 
 /* Allocate and load the module: note that size of section 0 is always
    zero, and we rely on this for optional sections. */
-static struct module *load_module(void __user *umod,
+static noinline struct module *load_module(void __user *umod,
 				  unsigned long len,
 				  const char __user *uargs)
 {
-- 
GitLab


From 8a549f8b581db95fec1e2d86ff857594fcfcd9db Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Fri, 22 Aug 2008 16:15:22 -0500
Subject: [PATCH 396/869] [IA64] Fix __{in,out}s{w,l} to handle unaligned data

Some ia64 systems produce several repeats of kernel messages like this:

 kernel unaligned access to 0xe000000644220466, ip=0xa000000100516fa1

This was tracked to ide code using the __cmd[] field in "struct request"
via the __outsw() function.  __cmd[] is a char array, so is not guaranteed
to be properly aligned when accessed as words.

Tested-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
---
 arch/ia64/include/asm/io.h | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h
index 260a85ac9d6..7f257507cd8 100644
--- a/arch/ia64/include/asm/io.h
+++ b/arch/ia64/include/asm/io.h
@@ -19,6 +19,8 @@
  * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
  */
 
+#include <asm/unaligned.h>
+
 /* We don't use IO slowdowns on the ia64, but.. */
 #define __SLOW_DOWN_IO	do { } while (0)
 #define SLOW_DOWN_IO	do { } while (0)
@@ -241,7 +243,7 @@ __insw (unsigned long port, void *dst, unsigned long count)
 	unsigned short *dp = dst;
 
 	while (count--)
-		*dp++ = platform_inw(port);
+		put_unaligned(platform_inw(port), dp++);
 }
 
 static inline void
@@ -250,7 +252,7 @@ __insl (unsigned long port, void *dst, unsigned long count)
 	unsigned int *dp = dst;
 
 	while (count--)
-		*dp++ = platform_inl(port);
+		put_unaligned(platform_inl(port), dp++);
 }
 
 static inline void
@@ -268,7 +270,7 @@ __outsw (unsigned long port, const void *src, unsigned long count)
 	const unsigned short *sp = src;
 
 	while (count--)
-		platform_outw(*sp++, port);
+		platform_outw(get_unaligned(sp++), port);
 }
 
 static inline void
@@ -277,7 +279,7 @@ __outsl (unsigned long port, const void *src, unsigned long count)
 	const unsigned int *sp = src;
 
 	while (count--)
-		platform_outl(*sp++, port);
+		platform_outl(get_unaligned(sp++), port);
 }
 
 /*
-- 
GitLab


From d25e26b61d59370eee8b7f2634641eb0fa76e952 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon, 25 Aug 2008 14:15:38 -0700
Subject: [PATCH 397/869] [x86] Clean up MAXSMP Kconfig, and limit NR_CPUS to
 512

This fixes a regression that was indirectly caused by commit
1184dc2ffe2c8fb9afb766d870850f2c3165ef25 ("x86: modify Kconfig to allow
up to 4096 cpus").

Allowing 4k CPU's is not practical at this time, because we still have a
number of places that have several 'cpumask_t's on the stack, and a
4k-bit cpumask is 512 bytes of stack-space for each such variable.  This
literally caused functions like 'smp_call_function_mask' to have a 2.5kB
stack frame, and several functions to have 2kB stackframes.

With an 8kB stack total, smashing the stack was simply much too likely.
At least bugzilla entry

	http://bugzilla.kernel.org/show_bug.cgi?id=11342

was due to this.

The earlier commit to not inline load_module() into sys_init_module()
fixed the particular symptoms of this that Alan Brunelle saw in that
bugzilla entry, but the huge stack waste by cpumask_t's was the more
direct cause.

Some day we'll have allocation helpers that allocate large CPU masks
dynamically, but in the meantime we simply cannot allow cpumasks this
large.

Cc: Alan D. Brunelle <Alan.Brunelle@hp.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/Kconfig | 30 ++++++++----------------------
 1 file changed, 8 insertions(+), 22 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 68d91c8233f..ed92864d132 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -577,35 +577,29 @@ config SWIOTLB
 
 config IOMMU_HELPER
 	def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
+
 config MAXSMP
 	bool "Configure Maximum number of SMP Processors and NUMA Nodes"
-	depends on X86_64 && SMP
+	depends on X86_64 && SMP && BROKEN
 	default n
 	help
 	  Configure maximum number of CPUS and NUMA Nodes for this architecture.
 	  If unsure, say N.
 
-if MAXSMP
-config NR_CPUS
-	int
-	default "4096"
-endif
-
-if !MAXSMP
 config NR_CPUS
-	int "Maximum number of CPUs (2-4096)"
-	range 2 4096
+	int "Maximum number of CPUs (2-512)" if !MAXSMP
+	range 2 512
 	depends on SMP
+	default "4096" if MAXSMP
 	default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
 	default "8"
 	help
 	  This allows you to specify the maximum number of CPUs which this
-	  kernel will support.  The maximum supported value is 4096 and the
+	  kernel will support.  The maximum supported value is 512 and the
 	  minimum value which makes sense is 2.
 
 	  This is purely to save memory - each supported CPU adds
 	  approximately eight kilobytes to the kernel image.
-endif
 
 config SCHED_SMT
 	bool "SMT (Hyperthreading) scheduler support"
@@ -996,17 +990,10 @@ config NUMA_EMU
 	  into virtual nodes when booted with "numa=fake=N", where N is the
 	  number of nodes. This is only useful for debugging.
 
-if MAXSMP
-
 config NODES_SHIFT
-	int
-	default "9"
-endif
-
-if !MAXSMP
-config NODES_SHIFT
-	int "Maximum NUMA Nodes (as a power of 2)"
+	int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
 	range 1 9   if X86_64
+	default "9" if MAXSMP
 	default "6" if X86_64
 	default "4" if X86_NUMAQ
 	default "3"
@@ -1014,7 +1001,6 @@ config NODES_SHIFT
 	help
 	  Specify the maximum number of NUMA Nodes available on the target
 	  system.  Increases memory reserved to accomodate various tables.
-endif
 
 config HAVE_ARCH_BOOTMEM_NODE
 	def_bool y
-- 
GitLab


From 30c2235cbc477d4629983d440cdc4f496fec9246 Mon Sep 17 00:00:00 2001
From: Vlad Yasevich <vladislav.yasevich@hp.com>
Date: Mon, 25 Aug 2008 15:16:19 -0700
Subject: [PATCH 398/869] sctp: add verification checks to SCTP_AUTH_KEY option

The structure used for SCTP_AUTH_KEY option contains a
length that needs to be verfied to prevent buffer overflow
conditions.  Spoted by Eugene Teo <eteo@redhat.com>.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sctp/auth.c   | 4 ++++
 net/sctp/socket.c | 5 +++++
 2 files changed, 9 insertions(+)

diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 675a5c3e68a..1fcb4cf2f4c 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -80,6 +80,10 @@ static struct sctp_auth_bytes *sctp_auth_create_key(__u32 key_len, gfp_t gfp)
 {
 	struct sctp_auth_bytes *key;
 
+	/* Verify that we are not going to overflow INT_MAX */
+	if ((INT_MAX - key_len) < sizeof(struct sctp_auth_bytes))
+		return NULL;
+
 	/* Allocate the shared key */
 	key = kmalloc(sizeof(struct sctp_auth_bytes) + key_len, gfp);
 	if (!key)
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index bb5c9ef1304..afa952e726d 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3144,6 +3144,11 @@ static int sctp_setsockopt_auth_key(struct sock *sk,
 		goto out;
 	}
 
+	if (authkey->sca_keylength > optlen) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	asoc = sctp_id2assoc(sk, authkey->sca_assoc_id);
 	if (!asoc && authkey->sca_assoc_id && sctp_style(sk, UDP)) {
 		ret = -EINVAL;
-- 
GitLab


From 2f4520d35d89ca6c5cd129c38e3b11f0283b7d1b Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 25 Aug 2008 15:17:44 -0700
Subject: [PATCH 399/869] ipv4: sysctl fixes

net.ipv4.neigh should be a part of skeleton to avoid ordering problems

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/route.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index cca921ea855..e91bafeb32f 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -3116,14 +3116,23 @@ static ctl_table ipv4_route_table[] = {
 	{ .ctl_name = 0 }
 };
 
-static __net_initdata struct ctl_path ipv4_route_path[] = {
+static struct ctl_table empty[1];
+
+static struct ctl_table ipv4_skeleton[] =
+{
+	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE,
+	  .child = ipv4_route_table},
+	{ .procname = "neigh", .ctl_name = NET_IPV4_NEIGH,
+	  .child = empty},
+	{ }
+};
+
+static __net_initdata struct ctl_path ipv4_path[] = {
 	{ .procname = "net", .ctl_name = CTL_NET, },
 	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
-	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE, },
 	{ },
 };
 
-
 static struct ctl_table ipv4_route_flush_table[] = {
 	{
 		.ctl_name 	= NET_IPV4_ROUTE_FLUSH,
@@ -3136,6 +3145,13 @@ static struct ctl_table ipv4_route_flush_table[] = {
 	{ .ctl_name = 0 },
 };
 
+static __net_initdata struct ctl_path ipv4_route_path[] = {
+	{ .procname = "net", .ctl_name = CTL_NET, },
+	{ .procname = "ipv4", .ctl_name = NET_IPV4, },
+	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE, },
+	{ },
+};
+
 static __net_init int sysctl_route_net_init(struct net *net)
 {
 	struct ctl_table *tbl;
@@ -3287,7 +3303,7 @@ int __init ip_rt_init(void)
  */
 void __init ip_static_sysctl_init(void)
 {
-	register_sysctl_paths(ipv4_route_path, ipv4_route_table);
+	register_sysctl_paths(ipv4_path, ipv4_skeleton);
 }
 #endif
 
-- 
GitLab


From ce3113ec57abcd41cc5a2fed02474aee3f63d12c Mon Sep 17 00:00:00 2001
From: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon, 25 Aug 2008 15:18:15 -0700
Subject: [PATCH 400/869] ipv6: sysctl fixes

Braino: net.ipv6 in ipv6 skeleton has no business in rotable
class

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/sysctl_net_ipv6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index e6dfaeac6be..587f8f60c48 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -156,7 +156,7 @@ static struct ctl_table_header *ip6_base;
 int ipv6_static_sysctl_register(void)
 {
 	static struct ctl_table empty[1];
-	ip6_base = register_net_sysctl_rotable(net_ipv6_ctl_path, empty);
+	ip6_base = register_sysctl_paths(net_ipv6_ctl_path, empty);
 	if (ip6_base == NULL)
 		return -ENOMEM;
 	return 0;
-- 
GitLab


From 2772f9037355a031725987661621290380e58f52 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Mon, 25 Aug 2008 15:19:17 -0700
Subject: [PATCH 401/869] bnx2x: Rx work check

The has Rx work check was wrong: when the FW was at the end of the page,
the driver was already at the beginning of the next page. Since the
check only validated that both driver and FW are pointing to the same
place, it concluded that there is still work to be done. This caused
some serious issues including long latency results on ping-pong test and
lockups while unloading the driver in that condition.

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x.h      | 2 +-
 drivers/net/bnx2x_main.c | 7 +++++++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index b468f904c7f..a14dba1afcc 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -271,7 +271,7 @@ struct bnx2x_fastpath {
 			 (fp->tx_pkt_prod != fp->tx_pkt_cons))
 
 #define BNX2X_HAS_RX_WORK(fp) \
-			(fp->rx_comp_cons != le16_to_cpu(*fp->rx_cons_sb))
+			(fp->rx_comp_cons != rx_cons_sb)
 
 #define BNX2X_HAS_WORK(fp)	(BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp))
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 971576b4368..272f5d112bb 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -9250,6 +9250,7 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
 						 napi);
 	struct bnx2x *bp = fp->bp;
 	int work_done = 0;
+	u16 rx_cons_sb;
 
 #ifdef BNX2X_STOP_ON_ERROR
 	if (unlikely(bp->panic))
@@ -9265,10 +9266,16 @@ static int bnx2x_poll(struct napi_struct *napi, int budget)
 	if (BNX2X_HAS_TX_WORK(fp))
 		bnx2x_tx_int(fp, budget);
 
+	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
+	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+		rx_cons_sb++;
 	if (BNX2X_HAS_RX_WORK(fp))
 		work_done = bnx2x_rx_int(fp, budget);
 
 	rmb(); /* BNX2X_HAS_WORK() reads the status block */
+	rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb);
+	if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT)
+		rx_cons_sb++;
 
 	/* must not complete if we consumed full budget */
 	if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) {
-- 
GitLab


From 7add905f93fa62d11d45fb1d2d05980661f2ccde Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Mon, 25 Aug 2008 15:20:48 -0700
Subject: [PATCH 402/869] bnx2x: Fan failure mechanism on additional design

The A1021G board is also using the fan failure mechanism in the same way
the A1022G board does

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 272f5d112bb..2e207b8eea9 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -2550,6 +2550,7 @@ static inline void bnx2x_attn_int_deasserted0(struct bnx2x *bp, u32 attn)
 		BNX2X_ERR("SPIO5 hw attention\n");
 
 		switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+		case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
 		case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
 			/* Fan failure attention */
 
@@ -5337,6 +5338,7 @@ static int bnx2x_init_common(struct bnx2x *bp)
 	}
 
 	switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
 	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
 		/* Fan failure is indicated by SPIO 5 */
 		bnx2x_set_spio(bp, MISC_REGISTERS_SPIO_5,
@@ -5531,6 +5533,7 @@ static int bnx2x_init_port(struct bnx2x *bp)
 	/* Port DMAE comes here */
 
 	switch (bp->common.board & SHARED_HW_CFG_BOARD_TYPE_MASK) {
+	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1021G:
 	case SHARED_HW_CFG_BOARD_TYPE_BCM957710A1022G:
 		/* add SPIO 5 to group 0 */
 		val = REG_RD(bp, MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
-- 
GitLab


From 76b190c592d952b37227f057a14f39e316754156 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Mon, 25 Aug 2008 15:22:46 -0700
Subject: [PATCH 403/869] bnx2x: Minimize lock time

After iSCSI boot, the HW lock should only protect the flag so only the
first function will reset the chip and not then entire chip reset
process

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 2e207b8eea9..9972d0c0267 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -6824,6 +6824,10 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 		 */
 		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 		val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
+		if (val == 0x7)
+			REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0);
+		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+
 		if (val == 0x7) {
 			u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
 			/* save our func */
@@ -6901,7 +6905,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp)
 			       (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) &
 				DRV_MSG_SEQ_NUMBER_MASK);
 		}
-		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 	}
 }
 
-- 
GitLab


From 46230476b7c66f7cbc013b771873c797f7ba770b Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Mon, 25 Aug 2008 15:23:30 -0700
Subject: [PATCH 404/869] bnx2x: HW lock timeout

Increasing the lock timeout to 5 seconds instead of 1 second to minimize
the chance of failures due to timeout

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 9972d0c0267..cb91802ea48 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -1717,8 +1717,8 @@ static int bnx2x_acquire_hw_lock(struct bnx2x *bp, u32 resource)
 		return -EEXIST;
 	}
 
-	/* Try for 1 second every 5ms */
-	for (cnt = 0; cnt < 200; cnt++) {
+	/* Try for 5 second every 5ms */
+	for (cnt = 0; cnt < 1000; cnt++) {
 		/* Try to acquire the lock */
 		REG_WR(bp, hw_lock_control_reg + 4, resource_bit);
 		lock_status = REG_RD(bp, hw_lock_control_reg);
-- 
GitLab


From 3cdf1db7db1649771d683b6ba323ff604ea3cc5e Mon Sep 17 00:00:00 2001
From: Yitchak Gertner <gertner@broadcom.com>
Date: Mon, 25 Aug 2008 15:24:21 -0700
Subject: [PATCH 405/869] bnx2x: Initialization structure

The TPA initialization is part of the FW internal memory initialization
and so it is moved to the appropriate function

Signed-off-by: Yitchak Gertner <gertner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index cb91802ea48..398daeb5be9 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -4606,6 +4606,17 @@ static void bnx2x_init_internal_common(struct bnx2x *bp)
 {
 	int i;
 
+	if (bp->flags & TPA_ENABLE_FLAG) {
+		struct tstorm_eth_tpa_exist tpa = {0};
+
+		tpa.tpa_exist = 1;
+
+		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET,
+		       ((u32 *)&tpa)[0]);
+		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET + 4,
+		       ((u32 *)&tpa)[1]);
+	}
+
 	/* Zero this manually as its initialization is
 	   currently missing in the initTool */
 	for (i = 0; i < (USTORM_AGG_DATA_SIZE >> 2); i++)
@@ -5365,17 +5376,6 @@ static int bnx2x_init_common(struct bnx2x *bp)
 
 	enable_blocks_attention(bp);
 
-	if (bp->flags & TPA_ENABLE_FLAG) {
-		struct tstorm_eth_tpa_exist tmp = {0};
-
-		tmp.tpa_exist = 1;
-
-		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET,
-		       ((u32 *)&tmp)[0]);
-		REG_WR(bp, BAR_TSTRORM_INTMEM + TSTORM_TPA_EXIST_OFFSET + 4,
-		       ((u32 *)&tmp)[1]);
-	}
-
 	if (!BP_NOMCP(bp)) {
 		bnx2x_acquire_phy_lock(bp);
 		bnx2x_common_init_phy(bp, bp->common.shmem_base);
-- 
GitLab


From d101463499b769d04e37d3bcb0e0c6876780ce08 Mon Sep 17 00:00:00 2001
From: Yitchak Gertner <gertner@broadcom.com>
Date: Mon, 25 Aug 2008 15:25:45 -0700
Subject: [PATCH 406/869] bnx2x: NIC load failure cleanup

Load failures were not handled correctly

Signed-off-by: Yitchak Gertner <gertner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 398daeb5be9..1c81da45f69 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -6341,7 +6341,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	rc = bnx2x_init_hw(bp, load_code);
 	if (rc) {
 		BNX2X_ERR("HW init failed, aborting\n");
-		goto load_error;
+		goto load_int_disable;
 	}
 
 	/* Setup NIC internals and enable interrupts */
@@ -6353,7 +6353,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		if (!load_code) {
 			BNX2X_ERR("MCP response failure, aborting\n");
 			rc = -EBUSY;
-			goto load_int_disable;
+			goto load_rings_free;
 		}
 	}
 
@@ -6372,7 +6372,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	rc = bnx2x_setup_leading(bp);
 	if (rc) {
 		BNX2X_ERR("Setup leading failed!\n");
-		goto load_stop_netif;
+		goto load_netif_stop;
 	}
 
 	if (CHIP_IS_E1H(bp))
@@ -6385,7 +6385,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		for_each_nondefault_queue(bp, i) {
 			rc = bnx2x_setup_multi(bp, i);
 			if (rc)
-				goto load_stop_netif;
+				goto load_netif_stop;
 		}
 
 	if (CHIP_IS_E1(bp))
@@ -6430,20 +6430,18 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
 	return 0;
 
-load_stop_netif:
+load_netif_stop:
 	for_each_queue(bp, i)
 		napi_disable(&bnx2x_fp(bp, i, napi));
-
-load_int_disable:
-	bnx2x_int_disable_sync(bp);
-
-	/* Release IRQs */
-	bnx2x_free_irq(bp);
-
+load_rings_free:
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
 	for_each_queue(bp, i)
 		bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE);
+load_int_disable:
+	bnx2x_int_disable_sync(bp);
+	/* Release IRQs */
+	bnx2x_free_irq(bp);
 load_error:
 	bnx2x_free_mem(bp);
 
-- 
GitLab


From 65abd74dd52a79226070904f138f3f8cbcdcf10b Mon Sep 17 00:00:00 2001
From: Yitchak Gertner <gertner@broadcom.com>
Date: Mon, 25 Aug 2008 15:26:24 -0700
Subject: [PATCH 407/869] bnx2x: NAPI and interrupts enable/disable

Fixing the order of enabling and disabling NAPI and the interrupts

Signed-off-by: Yitchak Gertner <gertner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 149 +++++++++++++++++++--------------------
 1 file changed, 73 insertions(+), 76 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 1c81da45f69..f0b04c98e45 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -6058,6 +6058,44 @@ static int bnx2x_req_irq(struct bnx2x *bp)
 	return rc;
 }
 
+static void bnx2x_napi_enable(struct bnx2x *bp)
+{
+	int i;
+
+	for_each_queue(bp, i)
+		napi_enable(&bnx2x_fp(bp, i, napi));
+}
+
+static void bnx2x_napi_disable(struct bnx2x *bp)
+{
+	int i;
+
+	for_each_queue(bp, i)
+		napi_disable(&bnx2x_fp(bp, i, napi));
+}
+
+static void bnx2x_netif_start(struct bnx2x *bp)
+{
+	if (atomic_dec_and_test(&bp->intr_sem)) {
+		if (netif_running(bp->dev)) {
+			if (bp->state == BNX2X_STATE_OPEN)
+				netif_wake_queue(bp->dev);
+			bnx2x_napi_enable(bp);
+			bnx2x_int_enable(bp);
+		}
+	}
+}
+
+static void bnx2x_netif_stop(struct bnx2x *bp)
+{
+	bnx2x_int_disable_sync(bp);
+	if (netif_running(bp->dev)) {
+		bnx2x_napi_disable(bp);
+		netif_tx_disable(bp->dev);
+		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
+	}
+}
+
 /*
  * Init service functions
  */
@@ -6363,8 +6401,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 
 	/* Enable Rx interrupt handling before sending the ramrod
 	   as it's completed on Rx FP queue */
-	for_each_queue(bp, i)
-		napi_enable(&bnx2x_fp(bp, i, napi));
+	bnx2x_napi_enable(bp);
 
 	/* Enable interrupt handling */
 	atomic_set(&bp->intr_sem, 0);
@@ -6431,8 +6468,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 	return 0;
 
 load_netif_stop:
-	for_each_queue(bp, i)
-		napi_disable(&bnx2x_fp(bp, i, napi));
+	bnx2x_napi_disable(bp);
 load_rings_free:
 	/* Free SKBs, SGEs, TPA pool and driver internals */
 	bnx2x_free_skbs(bp);
@@ -6614,11 +6650,9 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 	bp->rx_mode = BNX2X_RX_MODE_NONE;
 	bnx2x_set_storm_rx_mode(bp);
 
-	if (netif_running(bp->dev)) {
-		netif_tx_disable(bp->dev);
-		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
-	}
-
+	bnx2x_netif_stop(bp);
+	if (!netif_running(bp->dev))
+		bnx2x_napi_disable(bp);
 	del_timer_sync(&bp->timer);
 	SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb,
 		 (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq));
@@ -6632,9 +6666,7 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 		smp_rmb();
 		while (BNX2X_HAS_TX_WORK(fp)) {
 
-			if (!netif_running(bp->dev))
-				bnx2x_tx_int(fp, 1000);
-
+			bnx2x_tx_int(fp, 1000);
 			if (!cnt) {
 				BNX2X_ERR("timeout waiting for queue[%d]\n",
 					  i);
@@ -6650,46 +6682,12 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 			smp_rmb();
 		}
 	}
-
 	/* Give HW time to discard old tx messages */
 	msleep(1);
 
-	for_each_queue(bp, i)
-		napi_disable(&bnx2x_fp(bp, i, napi));
-	/* Disable interrupts after Tx and Rx are disabled on stack level */
-	bnx2x_int_disable_sync(bp);
-
 	/* Release IRQs */
 	bnx2x_free_irq(bp);
 
-	if (unload_mode == UNLOAD_NORMAL)
-		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
-
-	else if (bp->flags & NO_WOL_FLAG) {
-		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
-		if (CHIP_IS_E1H(bp))
-			REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
-
-	} else if (bp->wol) {
-		u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-		u8 *mac_addr = bp->dev->dev_addr;
-		u32 val;
-		/* The mac address is written to entries 1-4 to
-		   preserve entry 0 which is used by the PMF */
-		u8 entry = (BP_E1HVN(bp) + 1)*8;
-
-		val = (mac_addr[0] << 8) | mac_addr[1];
-		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
-
-		val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
-		      (mac_addr[4] << 8) | mac_addr[5];
-		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
-
-		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
-
-	} else
-		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
-
 	if (CHIP_IS_E1(bp)) {
 		struct mac_configuration_cmd *config =
 						bnx2x_sp(bp, mcast_config);
@@ -6712,14 +6710,41 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode)
 			      U64_LO(bnx2x_sp_mapping(bp, mcast_config)), 0);
 
 	} else { /* E1H */
+		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
+
 		bnx2x_set_mac_addr_e1h(bp, 0);
 
 		for (i = 0; i < MC_HASH_SIZE; i++)
 			REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
 	}
 
-	if (CHIP_IS_E1H(bp))
-		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
+	if (unload_mode == UNLOAD_NORMAL)
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
+
+	else if (bp->flags & NO_WOL_FLAG) {
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP;
+		if (CHIP_IS_E1H(bp))
+			REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
+
+	} else if (bp->wol) {
+		u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
+		u8 *mac_addr = bp->dev->dev_addr;
+		u32 val;
+		/* The mac address is written to entries 1-4 to
+		   preserve entry 0 which is used by the PMF */
+		u8 entry = (BP_E1HVN(bp) + 1)*8;
+
+		val = (mac_addr[0] << 8) | mac_addr[1];
+		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
+
+		val = (mac_addr[2] << 24) | (mac_addr[3] << 16) |
+		      (mac_addr[4] << 8) | mac_addr[5];
+		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
+
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
+
+	} else
+		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
 
 	/* Close multi and leading connections
 	   Completions for ramrods are collected in a synchronous way */
@@ -8621,34 +8646,6 @@ test_mem_exit:
 	return rc;
 }
 
-static void bnx2x_netif_start(struct bnx2x *bp)
-{
-	int i;
-
-	if (atomic_dec_and_test(&bp->intr_sem)) {
-		if (netif_running(bp->dev)) {
-			bnx2x_int_enable(bp);
-			for_each_queue(bp, i)
-				napi_enable(&bnx2x_fp(bp, i, napi));
-			if (bp->state == BNX2X_STATE_OPEN)
-				netif_wake_queue(bp->dev);
-		}
-	}
-}
-
-static void bnx2x_netif_stop(struct bnx2x *bp)
-{
-	int i;
-
-	if (netif_running(bp->dev)) {
-		netif_tx_disable(bp->dev);
-		bp->dev->trans_start = jiffies;	/* prevent tx timeout */
-		for_each_queue(bp, i)
-			napi_disable(&bnx2x_fp(bp, i, napi));
-	}
-	bnx2x_int_disable_sync(bp);
-}
-
 static void bnx2x_wait_for_link(struct bnx2x *bp, u8 link_up)
 {
 	int cnt = 1000;
-- 
GitLab


From 231fd58a4d21aa633db734274a27a67395155e51 Mon Sep 17 00:00:00 2001
From: Yitchak Gertner <gertner@broadcom.com>
Date: Mon, 25 Aug 2008 15:27:06 -0700
Subject: [PATCH 408/869] bnx2x: Multi Queue

The multi queue support is still disabled by default for the bnx2x
(needs some more testing and validation), but there are 2 obvious bug in
it which are fixed in this patch

Signed-off-by: Yitchak Gertner <gertner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index f0b04c98e45..95e058238af 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -6492,7 +6492,7 @@ static int bnx2x_stop_multi(struct bnx2x *bp, int index)
 
 	/* halt the connection */
 	bp->fp[index].state = BNX2X_FP_STATE_HALTING;
-	bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, 0, 0);
+	bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_HALT, index, 0, index, 0);
 
 	/* Wait for completion */
 	rc = bnx2x_wait_ramrod(bp, BNX2X_FP_STATE_HALTED, index,
@@ -9492,8 +9492,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	fp_index = (smp_processor_id() % bp->num_queues);
 	fp = &bp->fp[fp_index];
 
-	if (unlikely(bnx2x_tx_avail(bp->fp) <
-					(skb_shinfo(skb)->nr_frags + 3))) {
+	if (unlikely(bnx2x_tx_avail(fp) < (skb_shinfo(skb)->nr_frags + 3))) {
 		bp->eth_stats.driver_xoff++,
 		netif_stop_queue(dev);
 		BNX2X_ERR("BUG! Tx ring full when queue awake!\n");
@@ -9556,7 +9555,6 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		tx_bd->vlan = cpu_to_le16(pkt_prod);
 
 	if (xmit_type) {
-
 		/* turn on parsing and get a BD */
 		bd_prod = TX_BD(NEXT_TX_IDX(bd_prod));
 		pbd = (void *)&fp->tx_desc_ring[bd_prod];
-- 
GitLab


From c2d42545774c4bba7232521d836d0793330e3a4e Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Mon, 25 Aug 2008 15:30:39 -0700
Subject: [PATCH 409/869] bnx2x: Version update

Version update

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 95e058238af..82deea0a63f 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -59,8 +59,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION      "1.45.17"
-#define DRV_MODULE_RELDATE      "2008/08/13"
+#define DRV_MODULE_VERSION	"1.45.20"
+#define DRV_MODULE_RELDATE	"2008/08/25"
 #define BNX2X_BC_VER		0x040200
 
 /* Time in jiffies before concluding the transmitter is hung */
-- 
GitLab


From f4156d1cd1dc260cca767a6c0636625f05446799 Mon Sep 17 00:00:00 2001
From: Carl Love <cel@us.ibm.com>
Date: Mon, 11 Aug 2008 17:25:43 +1000
Subject: [PATCH 410/869] powerpc/cell/oprofile: Avoid double vfree of profile
 buffer

If an error occurs on opcontrol start, the event and per cpu buffers
are released.  If later opcontrol shutdown is called then the free
function will be called again to free buffers that no longer
exist.  This results in a kernel oops.  The following changes
prevent the call to delete buffers that don't exist.

Signed-off-by: Carl Love <carll@us.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 drivers/oprofile/cpu_buffer.c   | 4 +++-
 drivers/oprofile/event_buffer.c | 2 ++
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index 2450b3a393f..7ba78e6d210 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -38,8 +38,10 @@ void free_cpu_buffers(void)
 {
 	int i;
  
-	for_each_online_cpu(i)
+	for_each_online_cpu(i) {
 		vfree(per_cpu(cpu_buffer, i).buffer);
+		per_cpu(cpu_buffer, i).buffer = NULL;
+	}
 }
 
 int alloc_cpu_buffers(void)
diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c
index e7fbac52993..8d692a5c8e7 100644
--- a/drivers/oprofile/event_buffer.c
+++ b/drivers/oprofile/event_buffer.c
@@ -93,6 +93,8 @@ out:
 void free_event_buffer(void)
 {
 	vfree(event_buffer);
+
+	event_buffer = NULL;
 }
 
  
-- 
GitLab


From 98fded0728d6d65b78a7fe7d205e947ee81bb9b5 Mon Sep 17 00:00:00 2001
From: Geoff Levand <geoffrey.levand@am.sony.com>
Date: Thu, 21 Aug 2008 06:18:43 +1000
Subject: [PATCH 411/869] powerpc/ps3: Update ps3_defconfig

Update ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/configs/ps3_defconfig | 153 +++++++++++++++++++++++++----
 1 file changed, 133 insertions(+), 20 deletions(-)

diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index f9a3d3b394c..b6eee7c93cd 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 16 13:59:24 2008
+# Linux kernel version: 2.6.27-rc3
+# Wed Aug 20 08:16:53 2008
 #
 CONFIG_PPC64=y
 
@@ -92,7 +92,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -118,11 +117,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -179,6 +183,7 @@ CONFIG_PS3_STORAGE=y
 CONFIG_PS3_DISK=y
 CONFIG_PS3_ROM=y
 CONFIG_PS3_FLASH=y
+CONFIG_OPROFILE_PS3=y
 CONFIG_PS3_LPM=m
 CONFIG_PPC_CELL=y
 # CONFIG_PPC_CELL_NATIVE is not set
@@ -218,7 +223,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -252,8 +257,10 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+# CONFIG_MEMORY_HOTREMOVE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -276,19 +283,17 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_PCI_CHOICE=y
 # CONFIG_PCI is not set
 # CONFIG_PCI_DOMAINS is not set
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HAS_RAPIDIO is not set
+# CONFIG_RELOCATABLE is not set
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -399,9 +404,22 @@ CONFIG_BT_HCIUSB_SCO=y
 #
 # Wireless
 #
-# CONFIG_CFG80211 is not set
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS_EXT_SYSFS is not set
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
@@ -420,14 +438,79 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_CONCAT is not set
+# CONFIG_MTD_PARTITIONS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PS3VRAM=y
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -443,6 +526,7 @@ CONFIG_BLK_DEV_RAM_SIZE=65535
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -494,7 +578,6 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -510,9 +593,9 @@ CONFIG_MII=m
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_GELIC_NET=y
 CONFIG_GELIC_WIRELESS=y
+CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
 # CONFIG_NETDEV_10000 is not set
 
 #
@@ -523,8 +606,22 @@ CONFIG_WLAN_80211=y
 # CONFIG_LIBERTAS is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
 # CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+# CONFIG_RT2500USB is not set
+CONFIG_RT73USB=m
+# CONFIG_RT2X00_DEBUG is not set
 
 #
 # USB Network Adapters
@@ -622,6 +719,7 @@ CONFIG_INPUT_JOYSTICK=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -647,6 +745,8 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -663,8 +763,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -796,6 +898,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -816,6 +919,10 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # USB Device Class drivers
 #
@@ -843,6 +950,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -851,7 +959,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -864,7 +971,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -998,9 +1104,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1011,14 +1119,13 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1086,7 +1193,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1115,6 +1222,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1138,6 +1247,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -1146,6 +1256,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FTRACE=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE is not set
@@ -1153,12 +1264,14 @@ CONFIG_HAVE_DYNAMIC_FTRACE=y
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
-- 
GitLab


From 9cfeb74e93cf3549b7fa67ffe407192da625c777 Mon Sep 17 00:00:00 2001
From: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Date: Thu, 21 Aug 2008 06:18:51 +1000
Subject: [PATCH 412/869] powerpc/ps3: Rework htab code to remove ioremap

Rework the PS3 MMU hash table code to remove the need to ioremap the
hash table by using the HV calls lv1_insert_htab_entry() and
lv1_read_htab_entries().

This fixes a runtime failure on the PS3 introduced by the powerpc
ioremap_prot rework of commit a1f242ff460e4b50a045fa237c3c56cce9eabf83
("powerpc ioremap_prot").

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/ps3/htab.c  | 269 ++++++++++-------------------
 arch/powerpc/platforms/ps3/setup.c |   1 -
 2 files changed, 91 insertions(+), 179 deletions(-)

diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c
index 1cf901fa903..6eb1d4d182c 100644
--- a/arch/powerpc/platforms/ps3/htab.c
+++ b/arch/powerpc/platforms/ps3/htab.c
@@ -29,138 +29,75 @@
 
 #include "platform.h"
 
-#if defined(DEBUG)
-#define DBG udbg_printf
-#else
-#define DBG pr_debug
-#endif
-
-static struct hash_pte *htab;
-static unsigned long htab_addr;
-static unsigned char *bolttab;
-static unsigned char *inusetab;
-
-static DEFINE_SPINLOCK(ps3_bolttab_lock);
-
-#define debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g) \
-	_debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g, __func__, __LINE__)
-static void _debug_dump_hpte(unsigned long pa, unsigned long va,
-	unsigned long group, unsigned long bitmap, struct hash_pte lhpte,
-	int psize, unsigned long slot, const char* func, int line)
-{
-	DBG("%s:%d: pa     = %lxh\n", func, line, pa);
-	DBG("%s:%d: lpar   = %lxh\n", func, line,
-		ps3_mm_phys_to_lpar(pa));
-	DBG("%s:%d: va     = %lxh\n", func, line, va);
-	DBG("%s:%d: group  = %lxh\n", func, line, group);
-	DBG("%s:%d: bitmap = %lxh\n", func, line, bitmap);
-	DBG("%s:%d: hpte.v = %lxh\n", func, line, lhpte.v);
-	DBG("%s:%d: hpte.r = %lxh\n", func, line, lhpte.r);
-	DBG("%s:%d: psize  = %xh\n", func, line, psize);
-	DBG("%s:%d: slot   = %lxh\n", func, line, slot);
-}
+/**
+ * enum lpar_vas_id - id of LPAR virtual address space.
+ * @lpar_vas_id_current: Current selected virtual address space
+ *
+ * Identify the target LPAR address space.
+ */
+
+enum ps3_lpar_vas_id {
+	PS3_LPAR_VAS_ID_CURRENT = 0,
+};
+
+
+static DEFINE_SPINLOCK(ps3_htab_lock);
 
 static long ps3_hpte_insert(unsigned long hpte_group, unsigned long va,
 	unsigned long pa, unsigned long rflags, unsigned long vflags,
 	int psize, int ssize)
 {
-	unsigned long slot;
-	struct hash_pte lhpte;
-	int secondary = 0;
-	unsigned long result;
-	unsigned long bitmap;
+	int result;
+	u64 hpte_v, hpte_r;
+	u64 inserted_index;
+	u64 evicted_v, evicted_r;
+	u64 hpte_v_array[4], hpte_rs;
 	unsigned long flags;
-	unsigned long p_pteg, s_pteg, b_index, b_mask, cb, ci;
-
-	vflags &= ~HPTE_V_SECONDARY; /* this bit is ignored */
-
-	lhpte.v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M) |
-		vflags | HPTE_V_VALID;
-	lhpte.r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags;
-
-	p_pteg = hpte_group / HPTES_PER_GROUP;
-	s_pteg = ~p_pteg & htab_hash_mask;
-
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
-
-	BUG_ON(bolttab[p_pteg] == 0xff && bolttab[s_pteg] == 0xff);
+	long ret = -1;
 
-	bitmap = (inusetab[p_pteg] << 8) | inusetab[s_pteg];
+	/*
+	 * lv1_insert_htab_entry() will search for victim
+	 * entry in both primary and secondary pte group
+	 */
+	vflags &= ~HPTE_V_SECONDARY;
 
-	if (bitmap == 0xffff) {
-		/*
-		 * PTEG is full. Search for victim.
-		 */
-		bitmap &= ~((bolttab[p_pteg] << 8) | bolttab[s_pteg]);
-		do {
-			ci = mftb() & 15;
-			cb = 0x8000UL >> ci;
-		} while ((cb & bitmap) == 0);
-	} else {
-		/*
-		 * search free slot in hardware order
-		 *	[primary]	0, 2, 4, 6, 1, 3, 5, 7
-		 *	[secondary]	0, 2, 4, 6, 1, 3, 5, 7
-		 */
-		for (ci = 0; ci < HPTES_PER_GROUP; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = 1; ci < HPTES_PER_GROUP; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = HPTES_PER_GROUP; ci < HPTES_PER_GROUP*2; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-		for (ci = HPTES_PER_GROUP+1; ci < HPTES_PER_GROUP*2; ci += 2) {
-			cb = 0x8000UL >> ci;
-			if ((cb & bitmap) == 0)
-				goto found;
-		}
-	}
+	hpte_v = hpte_encode_v(va, psize, ssize) | vflags | HPTE_V_VALID;
+	hpte_r = hpte_encode_r(ps3_mm_phys_to_lpar(pa), psize) | rflags;
 
-found:
-	if (ci < HPTES_PER_GROUP) {
-		slot = p_pteg * HPTES_PER_GROUP + ci;
-	} else {
-		slot = s_pteg * HPTES_PER_GROUP + (ci & 7);
-		/* lhpte.dw0.dw0.h = 1; */
-		vflags |= HPTE_V_SECONDARY;
-		lhpte.v |= HPTE_V_SECONDARY;
-	}
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	result = lv1_write_htab_entry(0, slot, lhpte.v, lhpte.r);
+	/* talk hvc to replace entries BOLTED == 0 */
+	result = lv1_insert_htab_entry(PS3_LPAR_VAS_ID_CURRENT, hpte_group,
+				       hpte_v, hpte_r,
+				       HPTE_V_BOLTED, 0,
+				       &inserted_index,
+				       &evicted_v, &evicted_r);
 
 	if (result) {
-		debug_dump_hpte(pa, va, hpte_group, bitmap, lhpte, psize, slot);
+		/* all entries bolted !*/
+		pr_info("%s:result=%d va=%lx pa=%lx ix=%lx v=%lx r=%lx\n",
+			__func__, result, va, pa, hpte_group, hpte_v, hpte_r);
 		BUG();
 	}
 
 	/*
-	 * If used slot is not in primary HPTE group,
-	 * the slot should be in secondary HPTE group.
+	 * see if the entry is inserted into secondary pteg
 	 */
+	result = lv1_read_htab_entries(PS3_LPAR_VAS_ID_CURRENT,
+				       inserted_index & ~0x3UL,
+				       &hpte_v_array[0], &hpte_v_array[1],
+				       &hpte_v_array[2], &hpte_v_array[3],
+				       &hpte_rs);
+	BUG_ON(result);
 
-	if ((hpte_group ^ slot) & ~(HPTES_PER_GROUP - 1)) {
-		secondary = 1;
-		b_index = s_pteg;
-	} else {
-		secondary = 0;
-		b_index = p_pteg;
-	}
+	if (hpte_v_array[inserted_index % 4] & HPTE_V_SECONDARY)
+		ret = (inserted_index & 7) | (1 << 3);
+	else
+		ret = inserted_index & 7;
 
-	b_mask = (lhpte.v & HPTE_V_BOLTED) ? 1 << 7 : 0 << 7;
-	bolttab[b_index] |= b_mask >> (slot & 7);
-	b_mask = 1 << 7;
-	inusetab[b_index] |= b_mask >> (slot & 7);
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
 
-	return (slot & 7) | (secondary << 3);
+	return ret;
 }
 
 static long ps3_hpte_remove(unsigned long hpte_group)
@@ -172,39 +109,48 @@ static long ps3_hpte_remove(unsigned long hpte_group)
 static long ps3_hpte_updatepp(unsigned long slot, unsigned long newpp,
 	unsigned long va, int psize, int ssize, int local)
 {
+	int result;
+	u64 hpte_v, want_v, hpte_rs;
+	u64 hpte_v_array[4];
 	unsigned long flags;
-	unsigned long result;
-	unsigned long pteg, bit;
-	unsigned long hpte_v, want_v;
+	long ret;
 
-	want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M);
+	want_v = hpte_encode_v(va, psize, ssize);
 
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	hpte_v = htab[slot].v;
-	if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
-		spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
-
-		/* ps3_hpte_insert() will be used to update PTE */
-		return -1;
-	}
-
-	result = lv1_write_htab_entry(0, slot, 0, 0);
+	result = lv1_read_htab_entries(PS3_LPAR_VAS_ID_CURRENT, slot & ~0x3UL,
+				       &hpte_v_array[0], &hpte_v_array[1],
+				       &hpte_v_array[2], &hpte_v_array[3],
+				       &hpte_rs);
 
 	if (result) {
-		DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n",
-		       __func__, va, slot, psize, result, result);
+		pr_info("%s: res=%d read va=%lx slot=%lx psize=%d\n",
+			__func__, result, va, slot, psize);
 		BUG();
 	}
 
-	pteg = slot / HPTES_PER_GROUP;
-	bit = slot % HPTES_PER_GROUP;
-	inusetab[pteg] &= ~(0x80 >> bit);
+	hpte_v = hpte_v_array[slot % 4];
 
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	/*
+	 * As lv1_read_htab_entries() does not give us the RPN, we can
+	 * not synthesize the new hpte_r value here, and therefore can
+	 * not update the hpte with lv1_insert_htab_entry(), so we
+	 * insted invalidate it and ask the caller to update it via
+	 * ps3_hpte_insert() by returning a -1 value.
+	 */
+	if (!HPTE_V_COMPARE(hpte_v, want_v) || !(hpte_v & HPTE_V_VALID)) {
+		/* not found */
+		ret = -1;
+	} else {
+		/* entry found, just invalidate it */
+		result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT,
+					      slot, 0, 0);
+		ret = -1;
+	}
 
-	/* ps3_hpte_insert() will be used to update PTE */
-	return -1;
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
+	return ret;
 }
 
 static void ps3_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
@@ -217,45 +163,35 @@ static void ps3_hpte_invalidate(unsigned long slot, unsigned long va,
 	int psize, int ssize, int local)
 {
 	unsigned long flags;
-	unsigned long result;
-	unsigned long pteg, bit;
+	int result;
+
+	spin_lock_irqsave(&ps3_htab_lock, flags);
 
-	spin_lock_irqsave(&ps3_bolttab_lock, flags);
-	result = lv1_write_htab_entry(0, slot, 0, 0);
+	result = lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, slot, 0, 0);
 
 	if (result) {
-		DBG("%s: va=%lx slot=%lx psize=%d result = %ld (0x%lx)\n",
-		       __func__, va, slot, psize, result, result);
+		pr_info("%s: res=%d va=%lx slot=%lx psize=%d\n",
+			__func__, result, va, slot, psize);
 		BUG();
 	}
 
-	pteg = slot / HPTES_PER_GROUP;
-	bit = slot % HPTES_PER_GROUP;
-	inusetab[pteg] &= ~(0x80 >> bit);
-	spin_unlock_irqrestore(&ps3_bolttab_lock, flags);
+	spin_unlock_irqrestore(&ps3_htab_lock, flags);
 }
 
 static void ps3_hpte_clear(void)
 {
-	int result;
-
-	DBG(" -> %s:%d\n", __func__, __LINE__);
+	unsigned long hpte_count = (1UL << ppc64_pft_size) >> 4;
+	u64 i;
 
-	result = lv1_unmap_htab(htab_addr);
-	BUG_ON(result);
+	for (i = 0; i < hpte_count; i++)
+		lv1_write_htab_entry(PS3_LPAR_VAS_ID_CURRENT, i, 0, 0);
 
 	ps3_mm_shutdown();
 	ps3_mm_vas_destroy();
-
-	DBG(" <- %s:%d\n", __func__, __LINE__);
 }
 
 void __init ps3_hpte_init(unsigned long htab_size)
 {
-	long bitmap_size;
-
-	DBG(" -> %s:%d\n", __func__, __LINE__);
-
 	ppc_md.hpte_invalidate = ps3_hpte_invalidate;
 	ppc_md.hpte_updatepp = ps3_hpte_updatepp;
 	ppc_md.hpte_updateboltedpp = ps3_hpte_updateboltedpp;
@@ -264,28 +200,5 @@ void __init ps3_hpte_init(unsigned long htab_size)
 	ppc_md.hpte_clear_all = ps3_hpte_clear;
 
 	ppc64_pft_size = __ilog2(htab_size);
-
-	bitmap_size = htab_size / sizeof(struct hash_pte) / 8;
-
-	bolttab = __va(lmb_alloc(bitmap_size, 1));
-	inusetab = __va(lmb_alloc(bitmap_size, 1));
-
-	memset(bolttab, 0, bitmap_size);
-	memset(inusetab, 0, bitmap_size);
-
-	DBG(" <- %s:%d\n", __func__, __LINE__);
 }
 
-void __init ps3_map_htab(void)
-{
-	long result;
-	unsigned long htab_size = (1UL << ppc64_pft_size);
-
-	result = lv1_map_htab(0, &htab_addr);
-
-	htab = (__force struct hash_pte *)ioremap_flags(htab_addr, htab_size,
-					    pgprot_val(PAGE_READONLY_X));
-
-	DBG("%s:%d: lpar %016lxh, virt %016lxh\n", __func__, __LINE__,
-		htab_addr, (unsigned long)htab);
-}
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index a413abbd412..77bc330263c 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -201,7 +201,6 @@ static void __init ps3_setup_arch(void)
 	       ps3_firmware_version.rev);
 
 	ps3_spu_set_platform();
-	ps3_map_htab();
 
 #ifdef CONFIG_SMP
 	smp_init_ps3();
-- 
GitLab


From b47027795a22fe61f93de6010c120f26273fc693 Mon Sep 17 00:00:00 2001
From: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Date: Thu, 21 Aug 2008 06:18:56 +1000
Subject: [PATCH 413/869] powerpc/ps3: Fix ioremap of spu shadow regs

Fix the ioremap of the spu shadow regs on the PS3.

The current PS3 hypervisor requires the spu shadow regs to be
mapped with the PTE page protection bits set as read-only (PP=3).
This implementation uses the low level __ioremap() to bypass the
page protection settings inforced by ioremap_flags() to get the
needed PTE bits set for the shadow regs.

This fixes a runtime failure on the PS3 introduced by the powerpc
ioremap_prot rework of commit a1f242ff460e4b50a045fa237c3c56cce9eabf83
("powerpc ioremap_prot").

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
CC: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/ps3/spu.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/ps3/spu.c b/arch/powerpc/platforms/ps3/spu.c
index d135cef9ed6..ccae3d446b9 100644
--- a/arch/powerpc/platforms/ps3/spu.c
+++ b/arch/powerpc/platforms/ps3/spu.c
@@ -186,14 +186,24 @@ static void spu_unmap(struct spu *spu)
 	iounmap(spu_pdata(spu)->shadow);
 }
 
+/**
+ * setup_areas - Map the spu regions into the address space.
+ *
+ * The current HV requires the spu shadow regs to be mapped with the
+ * PTE page protection bits set as read-only (PP=3).  This implementation
+ * uses the low level __ioremap() to bypass the page protection settings
+ * inforced by ioremap_flags() to get the needed PTE bits set for the
+ * shadow regs.
+ */
+
 static int __init setup_areas(struct spu *spu)
 {
 	struct table {char* name; unsigned long addr; unsigned long size;};
+	static const unsigned long shadow_flags = _PAGE_NO_CACHE | 3;
 
-	spu_pdata(spu)->shadow = ioremap_flags(spu_pdata(spu)->shadow_addr,
-					       sizeof(struct spe_shadow),
-					       pgprot_val(PAGE_READONLY) |
-					       _PAGE_NO_CACHE);
+	spu_pdata(spu)->shadow = __ioremap(spu_pdata(spu)->shadow_addr,
+					   sizeof(struct spe_shadow),
+					   shadow_flags);
 	if (!spu_pdata(spu)->shadow) {
 		pr_debug("%s:%d: ioremap shadow failed\n", __func__, __LINE__);
 		goto fail_ioremap;
-- 
GitLab


From d617a40227705eb0d7b7692bbb974d077f0219a9 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Thu, 21 Aug 2008 11:16:26 +1000
Subject: [PATCH 414/869] powerpc: Export CMO_PageSize

This fixes an error building powerpc allmodconfig:

ERROR: "CMO_PageSize" [arch/powerpc/platforms/pseries/cmm.ko] undefined!

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/platforms/pseries/setup.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 3ce8a139b85..7b01d67b4e4 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -71,6 +71,7 @@
 int CMO_PrPSP = -1;
 int CMO_SecPSP = -1;
 unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT);
+EXPORT_SYMBOL(CMO_PageSize);
 
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 
-- 
GitLab


From 6ce5eecb9cd3ac97b952c50309b87c31488a45e9 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Tue, 26 Aug 2008 00:37:14 +0000
Subject: [PATCH 415/869] [CIFS] check version in spnego upcall response

Currently, we don't check the version in the SPNEGO upcall response
even though one is provided. Jeff and Q have made the corresponding
change to the Samba client (cifs.upcall).

Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES       | 6 +++++-
 fs/cifs/cifs_spnego.h | 2 +-
 fs/cifs/sess.c        | 9 +++++++++
 3 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index f5d0083e09f..526041a52d3 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -4,7 +4,11 @@ Fix premature write failure on congested networks (we would give up
 on EAGAIN from the socket too quickly on large writes).
 Cifs_mkdir and cifs_create now respect the setgid bit on parent dir.
 Fix endian problems in acl (mode from/to cifs acl) on bigendian
-architectures.
+architectures.  Fix problems with preserving timestamps on copying open
+files (e.g. "cp -a") to Windows servers.  For mkdir and create honor setgid bit
+on parent directory when server supports Unix Extensions but not POSIX
+create. Update cifs.upcall version to handle new Kerberos sec flags
+(this requires update of cifs.upcall program from Samba).
 
 Version 1.53
 ------------
diff --git a/fs/cifs/cifs_spnego.h b/fs/cifs/cifs_spnego.h
index 05a34b17a1a..e4041ec4d71 100644
--- a/fs/cifs/cifs_spnego.h
+++ b/fs/cifs/cifs_spnego.h
@@ -23,7 +23,7 @@
 #ifndef _CIFS_SPNEGO_H
 #define _CIFS_SPNEGO_H
 
-#define CIFS_SPNEGO_UPCALL_VERSION 1
+#define CIFS_SPNEGO_UPCALL_VERSION 2
 
 /*
  * The version field should always be set to CIFS_SPNEGO_UPCALL_VERSION.
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index 3188e4d9cdd..b537fad3bf5 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -516,6 +516,15 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 		}
 
 		msg = spnego_key->payload.data;
+		/* check version field to make sure that cifs.upcall is
+		   sending us a response in an expected form */
+		if (msg->version != CIFS_SPNEGO_UPCALL_VERSION) {
+			cERROR(1, ("incorrect version of cifs.upcall (expected"
+				   " %d but got %d)",
+				   CIFS_SPNEGO_UPCALL_VERSION, msg->version));
+			rc = -EKEYREJECTED;
+			goto ssetup_exit;
+		}
 		/* bail out if key is too long */
 		if (msg->sesskey_len >
 		    sizeof(ses->server->mac_signing_key.data.krb5)) {
-- 
GitLab


From f73be6dedf4fa058ce80846dae604b08fa805ca1 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 25 Aug 2008 17:07:14 -0700
Subject: [PATCH 416/869] smp: have smp_call_function_single() detect invalid
 CPUs

Have smp_call_function_single() return invalid CPU indicies and return
-ENXIO.  This function is already executed inside a
get_cpu()..put_cpu() which locks out CPU removal, so rather than
having the higher layers doing another layer of locking to guard
against unplugged CPUs do the test here.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 kernel/smp.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/kernel/smp.c b/kernel/smp.c
index 782e2b93e46..f362a855377 100644
--- a/kernel/smp.c
+++ b/kernel/smp.c
@@ -210,8 +210,10 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 {
 	struct call_single_data d;
 	unsigned long flags;
-	/* prevent preemption and reschedule on another processor */
+	/* prevent preemption and reschedule on another processor,
+	   as well as CPU removal */
 	int me = get_cpu();
+	int err = 0;
 
 	/* Can deadlock when called with interrupts disabled */
 	WARN_ON(irqs_disabled());
@@ -220,7 +222,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 		local_irq_save(flags);
 		func(info);
 		local_irq_restore(flags);
-	} else {
+	} else if ((unsigned)cpu < NR_CPUS && cpu_online(cpu)) {
 		struct call_single_data *data = NULL;
 
 		if (!wait) {
@@ -236,10 +238,12 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
 		data->func = func;
 		data->info = info;
 		generic_exec_single(cpu, data);
+	} else {
+		err = -ENXIO;	/* CPU not online */
 	}
 
 	put_cpu();
-	return 0;
+	return err;
 }
 EXPORT_SYMBOL(smp_call_function_single);
 
-- 
GitLab


From c6f31932d0a1d2b13952f506ebc92675e2d8df80 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 25 Aug 2008 17:27:21 -0700
Subject: [PATCH 417/869] x86: msr: propagate errors from
 smp_call_function_single()

Propagate error (-ENXIO) from smp_call_function_single().  These
errors can happen when a CPU is unplugged while the MSR driver is
open.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/msr.c     | 14 ++++++++++----
 arch/x86/lib/msr-on-cpu.c | 22 ++++++++++++----------
 include/asm-x86/msr.h     | 11 ++++++-----
 3 files changed, 28 insertions(+), 19 deletions(-)

diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index e4393808688..9c34a1005db 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -79,8 +79,11 @@ static ssize_t msr_read(struct file *file, char __user *buf,
 
 	for (; count; count -= 8) {
 		err = rdmsr_safe_on_cpu(cpu, reg, &data[0], &data[1]);
-		if (err)
-			return -EIO;
+		if (err) {
+			if (err == -EFAULT) /* Fix idiotic error code */
+				err = -EIO;
+			return err;
+		}
 		if (copy_to_user(tmp, &data, 8))
 			return -EFAULT;
 		tmp += 2;
@@ -105,8 +108,11 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 		if (copy_from_user(&data, tmp, 8))
 			return -EFAULT;
 		err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
-		if (err)
-			return -EIO;
+		if (err) {
+			if (err == -EFAULT) /* Fix idiotic error code */
+				err = -EIO;
+			return err;
+		}
 		tmp += 2;
 	}
 
diff --git a/arch/x86/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c
index d5a2b39f882..01b868ba82f 100644
--- a/arch/x86/lib/msr-on-cpu.c
+++ b/arch/x86/lib/msr-on-cpu.c
@@ -30,10 +30,11 @@ static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe)
 
 	rv.msr_no = msr_no;
 	if (safe) {
-		smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
-		err = rv.err;
+		err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu,
+					       &rv, 1);
+		err = err ? err : rv.err;
 	} else {
-		smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
+		err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
 	}
 	*l = rv.l;
 	*h = rv.h;
@@ -64,23 +65,24 @@ static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe)
 	rv.l = l;
 	rv.h = h;
 	if (safe) {
-		smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
-		err = rv.err;
+		err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu,
+					       &rv, 1);
+		err = err ? err : rv.err;
 	} else {
-		smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
+		err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
 	}
 
 	return err;
 }
 
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
-	_wrmsr_on_cpu(cpu, msr_no, l, h, 0);
+	return _wrmsr_on_cpu(cpu, msr_no, l, h, 0);
 }
 
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
-	_rdmsr_on_cpu(cpu, msr_no, l, h, 0);
+	return _rdmsr_on_cpu(cpu, msr_no, l, h, 0);
 }
 
 /* These "safe" variants are slower and should be used when the target MSR
diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h
index ca110ee73f0..ad5f2decf7f 100644
--- a/include/asm-x86/msr.h
+++ b/include/asm-x86/msr.h
@@ -192,19 +192,20 @@ do {                                                            \
 #define write_rdtscp_aux(val) wrmsr(0xc0000103, (val), 0)
 
 #ifdef CONFIG_SMP
-void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
+int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
-
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 #else  /*  CONFIG_SMP  */
-static inline void rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
+static inline int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 {
 	rdmsr(msr_no, *l, *h);
+	return 0;
 }
-static inline void wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
+static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
 	wrmsr(msr_no, l, h);
+	return 0;
 }
 static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
 				    u32 *l, u32 *h)
-- 
GitLab


From 4b46ca701bdcdc19fcf32823f9fcabf8236e4e78 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 25 Aug 2008 17:28:20 -0700
Subject: [PATCH 418/869] x86: cpuid: propagate error from
 smp_call_function_single()

Propagate error (-ENXIO) from smp_call_function_single() in the CPUID
driver.  This can happen when a CPU is unplugged while the CPUID
driver is open.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpuid.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 14b11b3be31..23e8316c835 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -89,6 +89,7 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	struct cpuid_regs cmd;
 	int cpu = iminor(file->f_path.dentry->d_inode);
 	u64 pos = *ppos;
+	int err;
 
 	if (count % 16)
 		return -EINVAL;	/* Invalid chunk size */
@@ -96,7 +97,9 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	for (; count; count -= 16) {
 		cmd.eax = pos;
 		cmd.ecx = pos >> 32;
-		smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
+		err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
+		if (err)
+			return err;
 		if (copy_to_user(tmp, &cmd, 16))
 			return -EFAULT;
 		tmp += 16;
-- 
GitLab


From 85f1cb60157e06d9e8996b02fad9ba6964523d75 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 25 Aug 2008 17:34:27 -0700
Subject: [PATCH 419/869] x86: msr: correct return value on partial operations

Return the correct return value when the MSR driver partially
completes a request (we should return the number of bytes actually
read or written, instead of the error code.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/msr.c | 28 ++++++++++++++++++----------
 1 file changed, 18 insertions(+), 10 deletions(-)

diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index 9c34a1005db..2e2af5d1819 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -72,7 +72,8 @@ static ssize_t msr_read(struct file *file, char __user *buf,
 	u32 data[2];
 	u32 reg = *ppos;
 	int cpu = iminor(file->f_path.dentry->d_inode);
-	int err;
+	int err = 0;
+	ssize_t bytes = 0;
 
 	if (count % 8)
 		return -EINVAL;	/* Invalid chunk size */
@@ -82,14 +83,17 @@ static ssize_t msr_read(struct file *file, char __user *buf,
 		if (err) {
 			if (err == -EFAULT) /* Fix idiotic error code */
 				err = -EIO;
-			return err;
+			break;
+		}
+		if (copy_to_user(tmp, &data, 8)) {
+			err = -EFAULT;
+			break;
 		}
-		if (copy_to_user(tmp, &data, 8))
-			return -EFAULT;
 		tmp += 2;
+		bytes += 8;
 	}
 
-	return ((char __user *)tmp) - buf;
+	return bytes ? bytes : err;
 }
 
 static ssize_t msr_write(struct file *file, const char __user *buf,
@@ -99,24 +103,28 @@ static ssize_t msr_write(struct file *file, const char __user *buf,
 	u32 data[2];
 	u32 reg = *ppos;
 	int cpu = iminor(file->f_path.dentry->d_inode);
-	int err;
+	int err = 0;
+	ssize_t bytes = 0;
 
 	if (count % 8)
 		return -EINVAL;	/* Invalid chunk size */
 
 	for (; count; count -= 8) {
-		if (copy_from_user(&data, tmp, 8))
-			return -EFAULT;
+		if (copy_from_user(&data, tmp, 8)) {
+			err = -EFAULT;
+			break;
+		}
 		err = wrmsr_safe_on_cpu(cpu, reg, data[0], data[1]);
 		if (err) {
 			if (err == -EFAULT) /* Fix idiotic error code */
 				err = -EIO;
-			return err;
+			break;
 		}
 		tmp += 2;
+		bytes += 8;
 	}
 
-	return ((char __user *)tmp) - buf;
+	return bytes ? bytes : err;
 }
 
 static int msr_open(struct inode *inode, struct file *file)
-- 
GitLab


From 9ea2b82ed6265a31f9a84886d74d8a2ef01b27c8 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 25 Aug 2008 17:35:25 -0700
Subject: [PATCH 420/869] x86: cpuid: correct return value on partial
 operations

Return the correct return value when the CPUID driver partially
completes a request (we should return the number of bytes actually
read or written, instead of the error code.)

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpuid.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 23e8316c835..8e9cd6a8ec1 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -89,7 +89,8 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	struct cpuid_regs cmd;
 	int cpu = iminor(file->f_path.dentry->d_inode);
 	u64 pos = *ppos;
-	int err;
+	ssize_t bytes = 0;
+	int err = 0;
 
 	if (count % 16)
 		return -EINVAL;	/* Invalid chunk size */
@@ -99,14 +100,17 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 		cmd.ecx = pos >> 32;
 		err = smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
 		if (err)
-			return err;
-		if (copy_to_user(tmp, &cmd, 16))
-			return -EFAULT;
+			break;
+		if (copy_to_user(tmp, &cmd, 16)) {
+			err = -EFAULT;
+			break;
+		}
 		tmp += 16;
+		bytes += 16;
 		*ppos = ++pos;
 	}
 
-	return tmp - buf;
+	return bytes ? bytes : err;
 }
 
 static int cpuid_open(struct inode *inode, struct file *file)
-- 
GitLab


From e5778ec91e823b97262f045814d34d0abde689c0 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 26 Aug 2008 10:33:32 +1000
Subject: [PATCH 421/869] ALSA: fix for CA0106 on MSI K8N Diamond PLUS
 Motherboard

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 sound/pci/ca0106/ca0106_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/pci/ca0106/ca0106_main.c b/sound/pci/ca0106/ca0106_main.c
index 03a274becae..6abe8a3bd36 100644
--- a/sound/pci/ca0106/ca0106_main.c
+++ b/sound/pci/ca0106/ca0106_main.c
@@ -254,7 +254,7 @@ static struct snd_ca0106_details ca0106_chip_details[] = {
 	   .name   = "MSI K8N Diamond MB",
 	   .gpio_type = 2,
 	   .i2c_adc = 1,
-	   .spi_dac = 2 }
+	   .spi_dac = 2 },
 	 /* Shuttle XPC SD31P which has an onboard Creative Labs
 	  * Sound Blaster Live! 24-bit EAX
 	  * high-definition 7.1 audio processor".
-- 
GitLab


From 9bdbb9633281b58ff483ede723f8c4a6344cab2f Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Tue, 26 Aug 2008 13:31:55 +1000
Subject: [PATCH 422/869] powerpc: Update defconfigs for most non-embedded
 platforms

Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/configs/chrp32_defconfig  | 141 ++++++---
 arch/powerpc/configs/g5_defconfig      | 227 ++++++++-------
 arch/powerpc/configs/iseries_defconfig |  87 ++++--
 arch/powerpc/configs/maple_defconfig   | 381 +++++++++++++++++--------
 arch/powerpc/configs/pmac32_defconfig  | 241 ++++++++--------
 arch/powerpc/configs/ppc64_defconfig   | 237 ++++++++-------
 arch/powerpc/configs/ppc6xx_defconfig  | 144 +++++-----
 arch/powerpc/configs/pseries_defconfig | 172 ++++++++---
 8 files changed, 1002 insertions(+), 628 deletions(-)

diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index 05360d4ef1b..2e0ef8c1822 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:00:44 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:12:40 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -33,6 +33,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -90,7 +91,6 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -117,10 +117,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -138,6 +144,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -157,19 +164,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 CONFIG_PPC_CHRP=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
@@ -201,7 +207,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -225,6 +231,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -232,6 +239,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -268,10 +276,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -398,7 +402,9 @@ CONFIG_NF_NAT_SIP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -427,12 +433,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -440,6 +448,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 CONFIG_IDEDISK_MULTI_MODE=y
@@ -454,7 +463,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -472,10 +480,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -493,8 +499,6 @@ CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_VIA82CXXX=y
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -588,6 +592,7 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
@@ -595,12 +600,15 @@ CONFIG_SCSI_SYM53C8XX_MMIO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -660,14 +668,12 @@ CONFIG_8139TOO=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=y
 # CONFIG_VIA_RHINE_MMIO is not set
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -683,6 +689,7 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -773,6 +780,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -798,12 +806,14 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -848,46 +858,71 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+# CONFIG_I2C_HYDRA is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_ISA is not set
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -896,10 +931,13 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -911,8 +949,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -997,10 +1037,13 @@ CONFIG_FB_3DFX=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1030,10 +1073,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1062,6 +1101,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1087,6 +1127,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1108,6 +1149,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1116,7 +1158,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1129,7 +1170,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1146,6 +1186,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1226,6 +1267,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1310,6 +1352,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1336,6 +1379,8 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1354,20 +1399,32 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1424,6 +1481,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 0ccc6e493dc..cfa5d053ee5 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Mon Jun 16 21:08:31 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:15:06 2008
 #
 CONFIG_PPC64=y
 
@@ -13,6 +13,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+# CONFIG_VSX is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -30,6 +31,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -94,9 +96,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -121,10 +122,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -140,6 +147,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -160,13 +168,8 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
@@ -224,7 +227,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -256,6 +259,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -265,6 +269,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
@@ -290,10 +295,6 @@ CONFIG_PCI_MSI=y
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -307,6 +308,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -422,6 +424,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -449,12 +453,14 @@ CONFIG_CDROM_PKTCDVD=m
 CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -462,6 +468,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -492,10 +499,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -516,8 +521,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -592,6 +595,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -675,29 +679,21 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB_PMU=y
@@ -712,7 +708,6 @@ CONFIG_WINDFARM_PM112=y
 CONFIG_WINDFARM_PM121=y
 # CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -720,7 +715,23 @@ CONFIG_BONDING=m
 CONFIG_TUN=m
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -740,10 +751,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -758,6 +767,7 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -855,6 +865,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -869,12 +880,14 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -909,44 +922,69 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -955,10 +993,13 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -970,8 +1011,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1050,10 +1093,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1077,15 +1123,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1103,19 +1141,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1177,20 +1209,9 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1198,30 +1219,11 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1256,6 +1258,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1306,6 +1309,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1314,7 +1318,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1323,7 +1326,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1383,7 +1385,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1497,6 +1498,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1519,7 +1521,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1603,6 +1604,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1629,8 +1631,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1644,22 +1648,37 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -1718,6 +1737,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index 63f0bdb6340..2c3f13577f4 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:01:36 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:15:49 2008
 #
 CONFIG_PPC64=y
 
@@ -31,6 +31,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -94,9 +95,8 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -120,10 +120,16 @@ CONFIG_SLUB=y
 # CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -139,6 +145,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -159,9 +166,6 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 CONFIG_LPARCFG=y
 CONFIG_PPC_ISERIES=y
@@ -173,8 +177,6 @@ CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -211,7 +213,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -241,6 +243,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -250,6 +253,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -274,10 +278,6 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,6 +291,7 @@ CONFIG_XFRM_USER=m
 CONFIG_XFRM_SUB_POLICY=y
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -480,7 +481,9 @@ CONFIG_NET_CLS_ROUTE=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -504,12 +507,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -588,6 +593,7 @@ CONFIG_SCSI_IBMVSCSI=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
@@ -612,12 +618,15 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -655,6 +664,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
@@ -662,10 +672,8 @@ CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -680,6 +688,7 @@ CONFIG_E1000=m
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -767,6 +776,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -789,6 +799,7 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_ISERIES=y
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
@@ -803,10 +814,13 @@ CONFIG_MAX_RAW_DEVS=256
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -818,8 +832,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -858,10 +874,6 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
@@ -910,7 +922,6 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
 CONFIG_GFS2_FS_LOCKING_DLM=m
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
@@ -967,6 +978,7 @@ CONFIG_CONFIGFS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -989,7 +1001,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1059,6 +1070,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1089,8 +1101,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1104,22 +1118,37 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_XMON is not set
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
@@ -1178,6 +1207,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index 7a166a39d92..1a3b6423222 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc4
-# Thu Dec  6 16:48:26 2007
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:18:58 2008
 #
 CONFIG_PPC64=y
 
@@ -27,7 +27,12 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -67,16 +72,20 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -89,11 +98,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -101,10 +112,28 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -114,6 +143,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -128,29 +158,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC52xx is not set
-# CONFIG_PPC_MPC5200 is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
 # CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
 # CONFIG_PPC_PS3 is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
 CONFIG_UDBG_RTAS_CONSOLE=y
+# CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
@@ -166,7 +193,6 @@ CONFIG_PPC_970_NAP=y
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_CPM2 is not set
 # CONFIG_FSL_ULI1575 is not set
 
 #
@@ -181,16 +207,19 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-# CONFIG_PREEMPT_BKL is not set
 CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -207,18 +236,21 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 # CONFIG_PPC_HAS_HASH_64K is not set
 # CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
-# CONFIG_WANT_DEVICE_TREE is not set
 CONFIG_ISA_DMA_API=y
 
 #
@@ -237,11 +269,10 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
-
-#
-# Networking
-#
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_NET=y
 
 #
@@ -254,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -284,8 +316,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -308,7 +338,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -334,12 +366,15 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -354,24 +389,30 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -381,14 +422,13 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 # CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -399,10 +439,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -419,10 +457,7 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -483,6 +518,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 CONFIG_SCSI_IPR=y
@@ -496,9 +532,13 @@ CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 CONFIG_ATA_NONSTANDARD=y
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -508,7 +548,6 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -537,6 +576,7 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -551,27 +591,47 @@ CONFIG_ATA_NONSTANDARD=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -587,7 +647,6 @@ CONFIG_MII=y
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
@@ -598,18 +657,21 @@ CONFIG_AMD8111_ETH=y
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139CP is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -617,12 +679,12 @@ CONFIG_E1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -632,9 +694,10 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -642,6 +705,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -657,7 +721,6 @@ CONFIG_USB_PEGASUS=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -702,10 +765,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -742,16 +808,14 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
-# I2C Algorithms
+# I2C Hardware Bus support
 #
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
 
 #
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
 #
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
@@ -759,32 +823,47 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
@@ -793,15 +872,14 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -813,13 +891,25 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -842,10 +932,6 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -865,6 +951,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -873,15 +960,18 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -896,6 +986,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -912,20 +1003,15 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
+CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -943,6 +1029,7 @@ CONFIG_USB_SERIAL_CYPRESS_M8=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 CONFIG_USB_SERIAL_GARMIN=m
 CONFIG_USB_SERIAL_IPW=m
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 CONFIG_USB_SERIAL_KEYSPAN=y
 CONFIG_USB_SERIAL_KEYSPAN_MPR=y
@@ -962,9 +1049,11 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -974,7 +1063,6 @@ CONFIG_USB_SERIAL_TI=m
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 # CONFIG_USB_SERIAL_DEBUG is not set
-CONFIG_USB_EZUSB=y
 
 #
 # USB Miscellaneous drivers
@@ -982,7 +1070,6 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -999,24 +1086,16 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1037,12 +1116,10 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1088,8 +1165,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1097,16 +1177,14 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1177,14 +1255,15 @@ CONFIG_NLS_DEFAULT="utf-8"
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_UCC_SLOW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1194,7 +1273,7 @@ CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
-# CONFIG_INSTRUMENTATION is not set
+CONFIG_HAVE_LMB=y
 
 #
 # Kernel hacking
@@ -1202,6 +1281,7 @@ CONFIG_HAS_DMA=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1209,34 +1289,59 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
-# CONFIG_FORCED_INLINING is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -1249,44 +1354,84 @@ CONFIG_BOOTX_TEXT=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 3688e4bb6fc..80481f27013 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:02:24 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:20:26 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -93,9 +94,8 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -120,10 +120,16 @@ CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -140,6 +146,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_LSF=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -159,19 +166,18 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
 # CONFIG_PPC_MPC52xx is not set
 CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 CONFIG_PPC_NATIVE=y
 # CONFIG_IPIC is not set
@@ -221,7 +227,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -244,6 +250,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -251,6 +258,7 @@ CONFIG_VIRT_TO_BUS=y
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 CONFIG_PM=y
 CONFIG_PM_DEBUG=y
@@ -314,10 +322,6 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -501,7 +505,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
@@ -571,6 +574,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 # CONFIG_BT_HCIUSB_SCO is not set
+# CONFIG_BT_HCIBTUSB is not set
 # CONFIG_BT_HCIUART is not set
 CONFIG_BT_HCIBCM203X=m
 # CONFIG_BT_HCIBPA10X is not set
@@ -588,27 +592,18 @@ CONFIG_BT_HCIBFUSB=m
 CONFIG_CFG80211=m
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
@@ -628,6 +623,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -656,12 +653,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -669,6 +668,8 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -685,7 +686,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
 
@@ -703,10 +703,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -727,8 +725,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -820,6 +816,7 @@ CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
 CONFIG_SCSI_MAC53C94=y
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -844,30 +841,22 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=m
 CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 # CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 # CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
 # CONFIG_IEEE1394_ETH1394 is not set
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=m
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB=y
@@ -887,7 +876,6 @@ CONFIG_THERM_ADT746X=m
 # CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -936,7 +924,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -952,6 +939,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -994,13 +982,15 @@ CONFIG_PRISM54=m
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 CONFIG_P54_COMMON=m
 # CONFIG_P54_USB is not set
 # CONFIG_P54_PCI is not set
 # CONFIG_ATH5K is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 CONFIG_B43=m
@@ -1095,6 +1085,7 @@ CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1109,12 +1100,14 @@ CONFIG_SERIO=y
 # CONFIG_SERIO_SERPORT is not set
 # CONFIG_SERIO_PCIPS2 is not set
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1165,45 +1158,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
-# CONFIG_I2C_MPC is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1212,6 +1230,8 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1221,6 +1241,7 @@ CONFIG_APM_POWER=y
 CONFIG_BATTERY_PMU=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1241,8 +1262,10 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1343,10 +1366,13 @@ CONFIG_FB_3DFX=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1374,15 +1400,7 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1400,19 +1418,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1474,20 +1486,9 @@ CONFIG_SND_DUMMY=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1495,36 +1496,14 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1554,6 +1533,7 @@ CONFIG_USB_DEVICE_CLASS=y
 CONFIG_USB_DYNAMIC_MINORS=y
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1579,6 +1559,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 CONFIG_USB_ACM=m
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1600,6 +1581,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1608,7 +1590,6 @@ CONFIG_USB_STORAGE_ONETOUCH=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1617,7 +1598,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_CH341 is not set
@@ -1676,7 +1656,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1693,6 +1672,7 @@ CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1702,6 +1682,8 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1789,6 +1771,7 @@ CONFIG_HFSPLUS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1811,7 +1794,6 @@ CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1891,6 +1873,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1921,8 +1904,10 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1933,24 +1918,38 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
@@ -2009,6 +2008,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index ce250bc9858..fc5930caeb5 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Mon Jun 16 21:11:19 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:22:03 2008
 #
 CONFIG_PPC64=y
 
@@ -14,6 +14,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+CONFIG_VSX=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -105,7 +107,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -129,14 +130,20 @@ CONFIG_SLUB_DEBUG=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -152,6 +159,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -172,14 +180,13 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_PPC_PSERIES=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
 CONFIG_PPC_ISERIES=y
 
 #
@@ -189,8 +196,6 @@ CONFIG_VIODASD=y
 CONFIG_VIOCD=m
 CONFIG_VIOTAPE=m
 CONFIG_VIOPATH=y
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
@@ -213,11 +218,15 @@ CONFIG_PPC_CELLEB=y
 #
 CONFIG_SPU_FS=m
 CONFIG_SPU_FS_64K_LS=y
+# CONFIG_SPU_TRACE is not set
 CONFIG_SPU_BASE=y
 CONFIG_CBE_RAS=y
+CONFIG_PPC_IBM_CELL_RESETBUTTON=y
+CONFIG_PPC_IBM_CELL_POWERBUTTON=m
 CONFIG_CBE_THERM=m
 CONFIG_CBE_CPUFREQ=m
 CONFIG_CBE_CPUFREQ_PMI=m
+CONFIG_CBE_CPUFREQ_SPU_GOVERNOR=m
 CONFIG_OPROFILE_CELL=y
 # CONFIG_PQ2ADS is not set
 CONFIG_PPC_NATIVE=y
@@ -279,7 +288,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -315,8 +324,10 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 CONFIG_SPARSEMEM_VMEMMAP=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -327,6 +338,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
@@ -370,10 +382,6 @@ CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -387,6 +395,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -578,6 +587,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -603,12 +614,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -616,6 +629,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -649,10 +663,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -674,8 +686,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -737,6 +747,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=y
+CONFIG_SCSI_IBMVFC=m
+CONFIG_SCSI_IBMVFC_TRACE=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_MVSAS is not set
@@ -758,6 +770,7 @@ CONFIG_SCSI_LPFC=m
 CONFIG_SCSI_DEBUG=m
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 CONFIG_ATA_NONSTANDARD=y
 CONFIG_SATA_PMP=y
@@ -837,9 +850,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
@@ -847,29 +857,21 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_FIREWIRE is not set
-CONFIG_IEEE1394=y
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 
 #
-# Controllers
+# Enable only one of the two stacks, unless you know what you are doing
 #
-# CONFIG_IEEE1394_PCILYNX is not set
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
 CONFIG_IEEE1394_OHCI1394=y
-
-#
-# Protocols
-#
-CONFIG_IEEE1394_VIDEO1394=m
+# CONFIG_IEEE1394_PCILYNX is not set
 CONFIG_IEEE1394_SBP2=m
 CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
 CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_ADB_PMU=y
@@ -884,7 +886,6 @@ CONFIG_WINDFARM_PM112=y
 CONFIG_WINDFARM_PM121=y
 # CONFIG_PMAC_RACKMETER is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -942,6 +943,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
@@ -949,10 +951,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -968,13 +968,13 @@ CONFIG_TIGON3=y
 CONFIG_SPIDER_NET=m
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
 CONFIG_EHEA=m
 # CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
@@ -1068,6 +1068,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1090,12 +1091,14 @@ CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -1131,11 +1134,13 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_ISERIES=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVC_BEAT=y
 CONFIG_HVCS=m
+CONFIG_IBM_BSR=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
@@ -1156,45 +1161,70 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-CONFIG_I2C_PASEMI=y
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PASEMI=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1203,10 +1233,13 @@ CONFIG_I2C_PASEMI=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1218,8 +1251,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1299,10 +1334,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1331,15 +1369,7 @@ CONFIG_FB_LOGO_EXTRA=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1355,19 +1385,13 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1429,20 +1453,9 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
+CONFIG_SND_PPC=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
-
-#
-# ALSA PowerPC devices
-#
-
-#
-# Apple Onboard Audio driver
-#
 CONFIG_SND_AOA=m
 CONFIG_SND_AOA_FABRIC_LAYOUT=m
 CONFIG_SND_AOA_ONYX=m
@@ -1450,36 +1463,14 @@ CONFIG_SND_AOA_TAS=m
 CONFIG_SND_AOA_TOONIE=m
 CONFIG_SND_AOA_SOUNDBUS=m
 CONFIG_SND_AOA_SOUNDBUS_I2S=m
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1508,6 +1499,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
 
 #
 # USB Host Controller Drivers
@@ -1556,6 +1548,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1564,7 +1557,6 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1577,7 +1569,6 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1769,6 +1760,7 @@ CONFIG_HFSPLUS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1779,12 +1771,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1793,7 +1785,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1878,6 +1869,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1910,8 +1902,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1923,28 +1917,47 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+# CONFIG_FTRACE is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_HCALL_STATS is not set
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 CONFIG_BOOTX_TEXT=y
@@ -2007,6 +2020,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index e6e91c85da3..3c6dbdef56e 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -1,8 +1,7 @@
-# powerpc
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-git2
-# Tue Jul 15 23:54:18 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:29:50 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -112,7 +111,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -140,12 +138,17 @@ CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
 # CONFIG_HAVE_DMA_ATTRS is not set
 # CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -266,7 +269,6 @@ CONFIG_TAU=y
 CONFIG_TAU_AVERAGE=y
 CONFIG_QUICC_ENGINE=y
 CONFIG_CPM2=y
-CONFIG_PPC_CPM_NEW_BINDING=y
 CONFIG_FSL_ULI1575=y
 CONFIG_CPM=y
 CONFIG_PPC_BESTCOMM=y
@@ -287,7 +289,7 @@ CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
@@ -311,6 +313,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_MIGRATION is not set
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
@@ -326,6 +329,7 @@ CONFIG_PM_DEBUG=y
 CONFIG_CAN_PM_TRACE=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -344,6 +348,7 @@ CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
 CONFIG_FSL_LBC=y
 CONFIG_FSL_GTM=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -395,10 +400,6 @@ CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 # CONFIG_TASK_SIZE_BOOL is not set
 CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -412,6 +413,7 @@ CONFIG_XFRM_USER=y
 CONFIG_XFRM_SUB_POLICY=y
 CONFIG_XFRM_MIGRATE=y
 CONFIG_XFRM_STATISTICS=y
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -602,6 +604,7 @@ CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
@@ -626,6 +629,7 @@ CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_SECURITY=m
 
 #
 # DECnet: Netfilter Configuration
@@ -643,6 +647,7 @@ CONFIG_BRIDGE_EBT_802_3=m
 CONFIG_BRIDGE_EBT_AMONG=m
 CONFIG_BRIDGE_EBT_ARP=m
 CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_IP6=m
 CONFIG_BRIDGE_EBT_LIMIT=m
 CONFIG_BRIDGE_EBT_MARK=m
 CONFIG_BRIDGE_EBT_PKTTYPE=m
@@ -691,8 +696,10 @@ CONFIG_ATM_LANE=m
 # CONFIG_ATM_MPOA is not set
 CONFIG_ATM_BR2684=m
 # CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
+# CONFIG_VLAN_8021Q_GVRP is not set
 CONFIG_DECNET=m
 CONFIG_DECNET_ROUTER=y
 CONFIG_LLC=m
@@ -832,6 +839,7 @@ CONFIG_BT_HIDP=m
 #
 CONFIG_BT_HCIUSB=m
 CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_BCSP=y
@@ -855,7 +863,6 @@ CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=m
-CONFIG_MAC80211_QOS=y
 
 #
 # Rate control algorithm selection
@@ -941,12 +948,14 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 # CONFIG_CDROM_PKTCDVD_WCACHE is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_VIRTIO_BLK=m
+CONFIG_BLK_DEV_HD=y
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=m
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 CONFIG_ENCLOSURE_SERVICES=m
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -954,6 +963,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -971,7 +981,6 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-# CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEPNP is not set
 CONFIG_BLK_DEV_IDEDMA_SFF=y
@@ -990,10 +999,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -1014,8 +1021,6 @@ CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_BLK_DEV_HD_ONLY=y
-CONFIG_BLK_DEV_HD=y
 
 #
 # SCSI device support
@@ -1125,6 +1130,7 @@ CONFIG_SCSI_DH=y
 CONFIG_SCSI_DH_RDAC=m
 CONFIG_SCSI_DH_HP_SW=m
 CONFIG_SCSI_DH_EMC=m
+# CONFIG_SCSI_DH_ALUA is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 # CONFIG_SATA_PMP is not set
@@ -1246,7 +1252,6 @@ CONFIG_WINDFARM=y
 # CONFIG_ANSLCD is not set
 CONFIG_PMAC_RACKMETER=m
 CONFIG_NETDEVICES=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
 CONFIG_IFB=m
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -1256,7 +1261,7 @@ CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_NET_SB1000=m
 # CONFIG_ARCNET is not set
-CONFIG_PHYLIB=m
+CONFIG_PHYLIB=y
 
 #
 # MII PHY device drivers
@@ -1271,7 +1276,9 @@ CONFIG_SMSC_PHY=m
 CONFIG_BROADCOM_PHY=m
 CONFIG_ICPLUS_PHY=m
 CONFIG_REALTEK_PHY=m
+# CONFIG_FIXED_PHY is not set
 CONFIG_MDIO_BITBANG=y
+# CONFIG_MDIO_OF_GPIO is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=m
 CONFIG_MACE=m
@@ -1328,9 +1335,7 @@ CONFIG_NE2000=m
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
 CONFIG_AMD8111_ETH=m
-CONFIG_AMD8111E_NAPI=y
 CONFIG_ADAPTEC_STARFIRE=m
-CONFIG_ADAPTEC_STARFIRE_NAPI=y
 # CONFIG_AC3200 is not set
 # CONFIG_APRICOT is not set
 CONFIG_B44=m
@@ -1359,7 +1364,6 @@ CONFIG_SUNDANCE=m
 CONFIG_TLAN=m
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
-CONFIG_VIA_RHINE_NAPI=y
 CONFIG_SC92031=m
 CONFIG_NET_POCKET=y
 CONFIG_DE600=m
@@ -1372,17 +1376,15 @@ CONFIG_ACENIC=m
 # CONFIG_ACENIC_OMIT_TIGON_I is not set
 CONFIG_DL2K=m
 CONFIG_E1000=m
-CONFIG_E1000_NAPI=y
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 CONFIG_E1000E=m
-CONFIG_E1000E_ENABLED=y
 CONFIG_IP1000=m
 CONFIG_IGB=m
+CONFIG_IGB_LRO=y
 CONFIG_NS83820=m
 CONFIG_HAMACHI=m
 CONFIG_YELLOWFIN=m
 CONFIG_R8169=m
-CONFIG_R8169_NAPI=y
 CONFIG_R8169_VLAN=y
 CONFIG_SIS190=m
 CONFIG_SKGE=m
@@ -1393,21 +1395,18 @@ CONFIG_VIA_VELOCITY=m
 CONFIG_TIGON3=m
 CONFIG_BNX2=m
 CONFIG_GIANFAR=m
-CONFIG_GFAR_NAPI=y
 # CONFIG_UCC_GETH is not set
 CONFIG_MV643XX_ETH=m
 CONFIG_QLA3XXX=m
 CONFIG_ATL1=m
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 CONFIG_CHELSIO_T1=m
 CONFIG_CHELSIO_T1_1G=y
-CONFIG_CHELSIO_T1_NAPI=y
 CONFIG_CHELSIO_T3=m
 CONFIG_IXGBE=m
 CONFIG_IXGB=m
-CONFIG_IXGB_NAPI=y
 CONFIG_S2IO=m
-CONFIG_S2IO_NAPI=y
 CONFIG_MYRI10GE=m
 CONFIG_NETXEN_NIC=m
 CONFIG_NIU=m
@@ -1477,8 +1476,7 @@ CONFIG_ATM_IDT77252_USE_SUNI=y
 # CONFIG_ATM_AMBASSADOR is not set
 # CONFIG_ATM_HORIZON is not set
 # CONFIG_ATM_IA is not set
-CONFIG_ATM_FORE200E_MAYBE=m
-# CONFIG_ATM_FORE200E_PCA is not set
+# CONFIG_ATM_FORE200E is not set
 CONFIG_ATM_HE=m
 # CONFIG_ATM_HE_USE_SUNI is not set
 CONFIG_FDDI=y
@@ -1551,6 +1549,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 CONFIG_MOUSE_SERIAL=m
 CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_INPORT is not set
 # CONFIG_MOUSE_LOGIBM is not set
 # CONFIG_MOUSE_PC110PAD is not set
@@ -1611,33 +1610,18 @@ CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_RAW=m
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 CONFIG_GAMEPORT=m
 CONFIG_GAMEPORT_NS558=m
 CONFIG_GAMEPORT_L4=m
 CONFIG_GAMEPORT_EMU10K1=m
 CONFIG_GAMEPORT_FM801=m
-CONFIG_INPUT_LIRC=y
-CONFIG_LIRC_DEV=m
-CONFIG_LIRC_ATIUSB=m
-CONFIG_LIRC_BT829=m
-CONFIG_LIRC_CMDIR=m
-CONFIG_LIRC_I2C=m
-CONFIG_LIRC_IGORPLUGUSB=m
-CONFIG_LIRC_IMON=m
-CONFIG_LIRC_IT87=m
-CONFIG_LIRC_MCEUSB=m
-CONFIG_LIRC_MCEUSB2=m
-CONFIG_LIRC_PVR150=m
-CONFIG_LIRC_PARALLEL=m
-CONFIG_LIRC_SERIAL=m
-CONFIG_LIRC_SIR=m
-CONFIG_LIRC_STREAMZAP=m
-CONFIG_LIRC_TTUSBIR=m
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1701,12 +1685,12 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_CRASH is not set
 CONFIG_BRIQ_PANEL=m
 CONFIG_PRINTER=m
 CONFIG_LP_CONSOLE=y
 CONFIG_PPDEV=m
 # CONFIG_HVC_RTAS is not set
+# CONFIG_VIRTIO_CONSOLE is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_VIRTIO=m
@@ -1728,6 +1712,7 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 CONFIG_I2C_ALGOPCA=m
 
@@ -1807,19 +1792,23 @@ CONFIG_SENSORS_TSL2550=m
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
+#
+# PCI GPIO expanders:
+#
+
 #
 # SPI GPIO expanders:
 #
@@ -1850,6 +1839,7 @@ CONFIG_APM_POWER=m
 CONFIG_BATTERY_PMU=m
 CONFIG_HWMON=m
 CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
 CONFIG_SENSORS_AD7418=m
 CONFIG_SENSORS_ADM1021=m
 CONFIG_SENSORS_ADM1025=m
@@ -1913,8 +1903,9 @@ CONFIG_WATCHDOG=y
 # Watchdog Device Drivers
 #
 CONFIG_SOFT_WATCHDOG=m
+# CONFIG_ALIM7101_WDT is not set
 # CONFIG_MPC5200_WDT is not set
-CONFIG_83xx_WDT=m
+# CONFIG_8xxx_WDT is not set
 CONFIG_WATCHDOG_RTAS=m
 
 #
@@ -1953,8 +1944,10 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=m
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1993,6 +1986,7 @@ CONFIG_MEDIA_TUNER_QT1010=m
 CONFIG_MEDIA_TUNER_XC2028=m
 CONFIG_MEDIA_TUNER_XC5000=m
 CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
 CONFIG_VIDEO_V4L2=m
 CONFIG_VIDEO_V4L1=m
 CONFIG_VIDEOBUF_GEN=m
@@ -2000,13 +1994,13 @@ CONFIG_VIDEOBUF_DMA_SG=m
 CONFIG_VIDEOBUF_VMALLOC=m
 CONFIG_VIDEOBUF_DVB=m
 CONFIG_VIDEO_BTCX=m
-CONFIG_VIDEO_IR_I2C=m
 CONFIG_VIDEO_IR=m
 CONFIG_VIDEO_TVEEPROM=m
 CONFIG_VIDEO_TUNER=m
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 # CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+CONFIG_VIDEO_IR_I2C=m
 
 #
 # Encoders/decoders and other helper chips
@@ -2108,6 +2102,8 @@ CONFIG_VIDEO_CX18=m
 # CONFIG_VIDEO_CAFE_CCIC is not set
 CONFIG_V4L_USB_DRIVERS=y
 CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
 CONFIG_VIDEO_PVRUSB2=m
 CONFIG_VIDEO_PVRUSB2_SYSFS=y
 CONFIG_VIDEO_PVRUSB2_DVB=y
@@ -2133,11 +2129,14 @@ CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
 CONFIG_USB_ZR364XX=m
 CONFIG_USB_STKWEBCAM=m
+# CONFIG_USB_S2255 is not set
 CONFIG_SOC_CAMERA=m
 CONFIG_SOC_CAMERA_MT9M001=m
 # CONFIG_MT9M001_PCA9536_SWITCH is not set
 CONFIG_SOC_CAMERA_MT9V022=m
 # CONFIG_MT9V022_PCA9536_SWITCH is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_CADET is not set
 # CONFIG_RADIO_RTRACK is not set
@@ -2194,6 +2193,8 @@ CONFIG_DVB_USB_DTT200U=m
 CONFIG_DVB_USB_OPERA1=m
 CONFIG_DVB_USB_AF9005=m
 CONFIG_DVB_USB_AF9005_REMOTE=m
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
 CONFIG_DVB_TTUSB_BUDGET=m
 CONFIG_DVB_TTUSB_DEC=m
 CONFIG_DVB_CINERGYT2=m
@@ -2203,6 +2204,7 @@ CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
 CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
 CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
 CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
+# CONFIG_DVB_SIANO_SMS1XXX is not set
 
 #
 # Supported FlexCopII (B2C2) Adapters
@@ -2253,6 +2255,7 @@ CONFIG_DVB_SP8870=m
 CONFIG_DVB_SP887X=m
 CONFIG_DVB_CX22700=m
 CONFIG_DVB_CX22702=m
+# CONFIG_DVB_DRX397XD is not set
 CONFIG_DVB_L64781=m
 CONFIG_DVB_TDA1004X=m
 CONFIG_DVB_NXT6000=m
@@ -2389,12 +2392,15 @@ CONFIG_FB_TRIDENT=m
 CONFIG_FB_TRIDENT_ACCEL=y
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_FSL_DIU is not set
 CONFIG_FB_SM501=m
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_PLATFORM=m
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -2613,6 +2619,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -2640,6 +2647,7 @@ CONFIG_USB_U132_HCD=m
 CONFIG_USB_SL811_HCD=m
 # CONFIG_USB_SL811_CS is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -2668,6 +2676,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 CONFIG_USB_STORAGE_ALAUDA=y
 CONFIG_USB_STORAGE_ONETOUCH=y
 CONFIG_USB_STORAGE_KARMA=y
+# CONFIG_USB_STORAGE_SIERRA is not set
 CONFIG_USB_STORAGE_CYPRESS_ATACB=y
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -2676,7 +2685,6 @@ CONFIG_USB_STORAGE_CYPRESS_ATACB=y
 #
 CONFIG_USB_MDC800=m
 CONFIG_USB_MICROTEK=m
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -2686,7 +2694,6 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_EZUSB=y
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_AIRCABLE=m
-CONFIG_USB_SERIAL_AIRPRIME=m
 CONFIG_USB_SERIAL_ARK3116=m
 CONFIG_USB_SERIAL_BELKIN=m
 CONFIG_USB_SERIAL_CH341=m
@@ -2734,7 +2741,6 @@ CONFIG_USB_SERIAL_DEBUG=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_AUERSWALD=m
 # CONFIG_USB_RIO500 is not set
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
@@ -2770,7 +2776,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -2853,6 +2861,7 @@ CONFIG_KS0108_PORT=0x378
 CONFIG_KS0108_DELAY=2
 CONFIG_UIO=m
 CONFIG_UIO_CIF=m
+CONFIG_UIO_PDRV=m
 CONFIG_UIO_SMX=m
 
 #
@@ -2899,6 +2908,7 @@ CONFIG_GFS2_FS_LOCKING_DLM=m
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+CONFIG_OCFS2_FS_STATS=y
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -2959,11 +2969,9 @@ CONFIG_BEFS_FS=m
 CONFIG_BFS_FS=m
 CONFIG_EFS_FS=m
 CONFIG_CRAMFS=m
-CONFIG_SQUASHFS=m
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 CONFIG_VXFS_FS=m
 CONFIG_MINIX_FS=m
+CONFIG_OMFS_FS=m
 # CONFIG_HPFS_FS is not set
 CONFIG_QNX4FS_FS=m
 CONFIG_ROMFS_FS=m
@@ -2988,7 +2996,6 @@ CONFIG_NFS_ACL_SUPPORT=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
-CONFIG_SUNRPC_BIND34=y
 CONFIG_RPCSEC_GSS_KRB5=m
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -3011,7 +3018,6 @@ CONFIG_NCPFS_SMALLDOS=y
 CONFIG_NCPFS_NLS=y
 CONFIG_NCPFS_EXTRAS=y
 CONFIG_CODA_FS=m
-# CONFIG_CODA_FS_OLD_API is not set
 # CONFIG_AFS_FS is not set
 CONFIG_9P_FS=m
 
@@ -3087,7 +3093,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=m
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -3120,6 +3126,8 @@ CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
@@ -3143,6 +3151,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_VM=y
 CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
@@ -3158,6 +3167,7 @@ CONFIG_FAIL_MAKE_REQUEST=y
 CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FTRACE=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_TRACER_MAX_TRACE=y
@@ -3168,16 +3178,18 @@ CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_DYNAMIC_FTRACE=y
 # CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_BUILD_DOCSRC is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUGGER=y
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_KGDB_CONSOLE is not set
 CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BDI_SWITCH is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index fe6ffa683d7..e77c5e7a0be 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Tue May 20 20:03:28 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 13:31:07 2008
 #
 CONFIG_PPC64=y
 
@@ -14,6 +14,7 @@ CONFIG_POWER4=y
 # CONFIG_TUNE_CELL is not set
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+CONFIG_VSX=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -104,7 +106,6 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -132,11 +133,17 @@ CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -152,6 +159,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -172,17 +180,14 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 CONFIG_PPC_PSERIES=y
 CONFIG_PPC_SPLPAR=y
 CONFIG_EEH=y
 CONFIG_SCANLOG=m
 CONFIG_LPARCFG=y
+CONFIG_PPC_SMLPAR=y
+CONFIG_CMM=y
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -226,7 +231,7 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -275,6 +280,7 @@ CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -304,10 +310,6 @@ CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -321,6 +323,7 @@ CONFIG_XFRM_USER=m
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 CONFIG_NET_KEY=m
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -498,6 +501,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -531,12 +536,14 @@ CONFIG_BLK_DEV_RAM_SIZE=65536
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDE=y
@@ -544,6 +551,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -575,10 +583,8 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -596,8 +602,6 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -659,6 +663,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 CONFIG_SCSI_IBMVSCSI=y
+CONFIG_SCSI_IBMVFC=m
+CONFIG_SCSI_IBMVFC_TRACE=y
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
@@ -681,6 +687,7 @@ CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -703,9 +710,6 @@ CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
 CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-# CONFIG_DM_MULTIPATH_RDAC is not set
-# CONFIG_DM_MULTIPATH_HP is not set
 # CONFIG_DM_DELAY is not set
 # CONFIG_DM_UEVENT is not set
 # CONFIG_FUSION is not set
@@ -713,12 +717,15 @@ CONFIG_DM_MULTIPATH_EMC=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -726,7 +733,23 @@ CONFIG_BONDING=m
 CONFIG_TUN=m
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -759,6 +782,7 @@ CONFIG_E100=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_NET_POCKET is not set
@@ -767,10 +791,8 @@ CONFIG_ACENIC=y
 CONFIG_ACENIC_OMIT_TIGON_I=y
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -785,14 +807,14 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+CONFIG_EHEA=y
 # CONFIG_IXGBE is not set
 CONFIG_IXGB=m
-# CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
-# CONFIG_S2IO_NAPI is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
@@ -883,6 +905,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -906,12 +929,14 @@ CONFIG_SERIO_I8042=y
 # CONFIG_SERIO_PCIPS2 is not set
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -943,6 +968,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
 CONFIG_HVC_DRIVER=y
+CONFIG_HVC_IRQ=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
@@ -961,44 +987,65 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOBIT=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1007,10 +1054,13 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -1022,8 +1072,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1102,10 +1154,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_PLATFORM=m
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 
@@ -1133,10 +1188,6 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1165,6 +1216,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1190,6 +1242,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1211,6 +1264,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 CONFIG_USB_STORAGE_ONETOUCH=y
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1219,7 +1273,6 @@ CONFIG_USB_STORAGE_ONETOUCH=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1233,7 +1286,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1250,6 +1302,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1316,6 +1369,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_STATS=y
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 CONFIG_DNOTIFY=y
@@ -1371,6 +1425,7 @@ CONFIG_CONFIGFS_FS=m
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1394,7 +1449,6 @@ CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
 CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
@@ -1463,6 +1517,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
@@ -1495,8 +1550,10 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
+CONFIG_SCHEDSTATS=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
@@ -1508,30 +1565,49 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
 # CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+# CONFIG_FTRACE is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HCALL_STATS=y
-CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
 CONFIG_IRQSTACKS=y
 CONFIG_VIRQ_DEBUG=y
 # CONFIG_BOOTX_TEXT is not set
@@ -1590,6 +1666,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-- 
GitLab


From 08970fc4e0385790a7b093adfaa4165a189f9eb0 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 25 Aug 2008 22:39:15 -0700
Subject: [PATCH 423/869] x86: msr: fix bogus return values from
 rdmsr_safe/wrmsr_safe

Impact: bogus error codes (+other?) on x86-64

The rdmsr_safe/wrmsr_safe routines have macros for the handling of the
edx:eax arguments.  Those macros take a variable number of assembly
arguments.  This is rather inherently incompatible with using
%digit-style escapes in the inline assembly; replace those with
%[name]-style escapes.

This fixes miscompilation on x86-64, which at the very least caused
bogus return values.  It is possible that this could also corrupt the
return value; I am not sure.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 include/asm-x86/msr.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h
index ad5f2decf7f..2362cfda1fb 100644
--- a/include/asm-x86/msr.h
+++ b/include/asm-x86/msr.h
@@ -52,14 +52,14 @@ static inline unsigned long long native_read_msr_safe(unsigned int msr,
 {
 	DECLARE_ARGS(val, low, high);
 
-	asm volatile("2: rdmsr ; xor %0,%0\n"
+	asm volatile("2: rdmsr ; xor %[err],%[err]\n"
 		     "1:\n\t"
 		     ".section .fixup,\"ax\"\n\t"
-		     "3:  mov %3,%0 ; jmp 1b\n\t"
+		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
 		     ".previous\n\t"
 		     _ASM_EXTABLE(2b, 3b)
-		     : "=r" (*err), EAX_EDX_RET(val, low, high)
-		     : "c" (msr), "i" (-EFAULT));
+		     : [err] "=r" (*err), EAX_EDX_RET(val, low, high)
+		     : "c" (msr), [fault] "i" (-EFAULT));
 	return EAX_EDX_VAL(val, low, high);
 }
 
@@ -73,15 +73,15 @@ static inline int native_write_msr_safe(unsigned int msr,
 					unsigned low, unsigned high)
 {
 	int err;
-	asm volatile("2: wrmsr ; xor %0,%0\n"
+	asm volatile("2: wrmsr ; xor %[err],%[err]\n"
 		     "1:\n\t"
 		     ".section .fixup,\"ax\"\n\t"
-		     "3:  mov %4,%0 ; jmp 1b\n\t"
+		     "3:  mov %[fault],%[err] ; jmp 1b\n\t"
 		     ".previous\n\t"
 		     _ASM_EXTABLE(2b, 3b)
-		     : "=a" (err)
+		     : [err] "=a" (err)
 		     : "c" (msr), "0" (low), "d" (high),
-		       "i" (-EFAULT)
+		       [fault] "i" (-EFAULT)
 		     : "memory");
 	return err;
 }
-- 
GitLab


From a64ae7a2256b56bbd2830749c580fa533b69758c Mon Sep 17 00:00:00 2001
From: Mike Crowe <mac@mcrowe.com>
Date: Mon, 28 Jul 2008 13:12:52 +0100
Subject: [PATCH 424/869] [MIPS] Convert printk statements during kernel setup
 to use severity levels

Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/setup.c | 42 +++++++++++++++++++---------------------
 1 file changed, 20 insertions(+), 22 deletions(-)

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 8af84867e74..2aae76bce29 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -78,7 +78,7 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 
 	/* Sanity check */
 	if (start + size < start) {
-		printk("Trying to add an invalid memory region, skipped\n");
+		pr_warning("Trying to add an invalid memory region, skipped\n");
 		return;
 	}
 
@@ -92,7 +92,7 @@ void __init add_memory_region(phys_t start, phys_t size, long type)
 	}
 
 	if (x == BOOT_MEM_MAP_MAX) {
-		printk("Ooops! Too many entries in the memory map!\n");
+		pr_err("Ooops! Too many entries in the memory map!\n");
 		return;
 	}
 
@@ -108,22 +108,22 @@ static void __init print_memory_map(void)
 	const int field = 2 * sizeof(unsigned long);
 
 	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		printk(" memory: %0*Lx @ %0*Lx ",
+		printk(KERN_INFO " memory: %0*Lx @ %0*Lx ",
 		       field, (unsigned long long) boot_mem_map.map[i].size,
 		       field, (unsigned long long) boot_mem_map.map[i].addr);
 
 		switch (boot_mem_map.map[i].type) {
 		case BOOT_MEM_RAM:
-			printk("(usable)\n");
+			printk(KERN_CONT "(usable)\n");
 			break;
 		case BOOT_MEM_ROM_DATA:
-			printk("(ROM data)\n");
+			printk(KERN_CONT "(ROM data)\n");
 			break;
 		case BOOT_MEM_RESERVED:
-			printk("(reserved)\n");
+			printk(KERN_CONT "(reserved)\n");
 			break;
 		default:
-			printk("type %lu\n", boot_mem_map.map[i].type);
+			printk(KERN_CONT "type %lu\n", boot_mem_map.map[i].type);
 			break;
 		}
 	}
@@ -185,11 +185,11 @@ static unsigned long __init init_initrd(void)
 
 sanitize:
 	if (initrd_start & ~PAGE_MASK) {
-		printk(KERN_ERR "initrd start must be page aligned\n");
+		pr_err("initrd start must be page aligned\n");
 		goto disable;
 	}
 	if (initrd_start < PAGE_OFFSET) {
-		printk(KERN_ERR "initrd start < PAGE_OFFSET\n");
+		pr_err("initrd start < PAGE_OFFSET\n");
 		goto disable;
 	}
 
@@ -221,18 +221,18 @@ static void __init finalize_initrd(void)
 		goto disable;
 	}
 	if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) {
-		printk("Initrd extends beyond end of memory");
+		printk(KERN_ERR "Initrd extends beyond end of memory");
 		goto disable;
 	}
 
 	reserve_bootmem(__pa(initrd_start), size, BOOTMEM_DEFAULT);
 	initrd_below_start_ok = 1;
 
-	printk(KERN_INFO "Initial ramdisk at: 0x%lx (%lu bytes)\n",
-	       initrd_start, size);
+	pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n",
+		initrd_start, size);
 	return;
 disable:
-	printk(" - disabling initrd\n");
+	printk(KERN_CONT " - disabling initrd\n");
 	initrd_start = 0;
 	initrd_end = 0;
 }
@@ -310,14 +310,12 @@ static void __init bootmem_init(void)
 	if (min_low_pfn >= max_low_pfn)
 		panic("Incorrect memory mapping !!!");
 	if (min_low_pfn > ARCH_PFN_OFFSET) {
-		printk(KERN_INFO
-		       "Wasting %lu bytes for tracking %lu unused pages\n",
-		       (min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
-		       min_low_pfn - ARCH_PFN_OFFSET);
+		pr_info("Wasting %lu bytes for tracking %lu unused pages\n",
+			(min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
+			min_low_pfn - ARCH_PFN_OFFSET);
 	} else if (min_low_pfn < ARCH_PFN_OFFSET) {
-		printk(KERN_INFO
-		       "%lu free pages won't be used\n",
-		       ARCH_PFN_OFFSET - min_low_pfn);
+		pr_info("%lu free pages won't be used\n",
+			ARCH_PFN_OFFSET - min_low_pfn);
 	}
 	min_low_pfn = ARCH_PFN_OFFSET;
 
@@ -471,7 +469,7 @@ static void __init arch_mem_init(char **cmdline_p)
 	/* call board setup routine */
 	plat_mem_setup();
 
-	printk("Determined physical RAM map:\n");
+	pr_info("Determined physical RAM map:\n");
 	print_memory_map();
 
 	strlcpy(command_line, arcs_cmdline, sizeof(command_line));
@@ -482,7 +480,7 @@ static void __init arch_mem_init(char **cmdline_p)
 	parse_early_param();
 
 	if (usermem) {
-		printk("User-defined physical RAM map:\n");
+		pr_info("User-defined physical RAM map:\n");
 		print_memory_map();
 	}
 
-- 
GitLab


From 3885b71ba66bfd0dbe92e580c23eebaccd11248b Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 31 Jul 2008 11:16:43 +0100
Subject: [PATCH 425/869] [MIPS] Wire up new syscalls.

signalfd4, eventfd2, epoll_create1, dup3, pipe2 and inotify_init1.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/scall32-o32.S |  6 ++++++
 arch/mips/kernel/scall64-64.S  |  6 ++++++
 arch/mips/kernel/scall64-n32.S |  6 ++++++
 arch/mips/kernel/scall64-o32.S |  6 ++++++
 include/asm-mips/unistd.h      | 30 ++++++++++++++++++++++++------
 5 files changed, 48 insertions(+), 6 deletions(-)

diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index fc4fd4d705e..5e75a316f6b 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -647,6 +647,12 @@ einval:	li	v0, -EINVAL
 	sys	sys_timerfd_create	2
 	sys	sys_timerfd_gettime	2
 	sys	sys_timerfd_settime	4
+	sys	sys_signalfd4		4
+	sys	sys_eventfd2		2	/* 4325 */
+	sys	sys_epoll_create1	1
+	sys	sys_dup3		3
+	sys	sys_pipe2		2
+	sys	sys_inotify_init1	1
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 2b73fd1e452..3d58204c9d4 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -481,4 +481,10 @@ sys_call_table:
 	PTR	sys_timerfd_create		/* 5280 */
 	PTR	sys_timerfd_gettime
 	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2
+	PTR	sys_epoll_create1		/* 5285 */
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 2654e75d2fe..da7f1b6ea0f 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -407,4 +407,10 @@ EXPORT(sysn32_call_table)
 	PTR	sys_timerfd_create
 	PTR	sys_timerfd_gettime		/* 5285 */
 	PTR	sys_timerfd_settime
+	PTR	sys_signalfd4
+	PTR	sys_eventfd2
+	PTR	sys_epoll_create1
+	PTR	sys_dup3			/* 5290 */
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 76167bea5a7..d7cd1aac9ad 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -529,4 +529,10 @@ sys_call_table:
 	PTR	sys_timerfd_create
 	PTR	sys_timerfd_gettime
 	PTR	sys_timerfd_settime
+	PTR	compat_sys_signalfd4
+	PTR	sys_eventfd2			/* 4325 */
+	PTR	sys_epoll_create1
+	PTR	sys_dup3
+	PTR	sys_pipe2
+	PTR	sys_inotify_init1
 	.size	sys_call_table,.-sys_call_table
diff --git a/include/asm-mips/unistd.h b/include/asm-mips/unistd.h
index 4964c82f85f..a73e1531e15 100644
--- a/include/asm-mips/unistd.h
+++ b/include/asm-mips/unistd.h
@@ -344,16 +344,22 @@
 #define __NR_timerfd_create		(__NR_Linux + 321)
 #define __NR_timerfd_gettime		(__NR_Linux + 322)
 #define __NR_timerfd_settime		(__NR_Linux + 323)
+#define __NR_signalfd4			(__NR_Linux + 324)
+#define __NR_eventfd2			(__NR_Linux + 325)
+#define __NR_epoll_create1		(__NR_Linux + 326)
+#define __NR_dup3			(__NR_Linux + 327)
+#define __NR_pipe2			(__NR_Linux + 328)
+#define __NR_inotify_init1		(__NR_Linux + 329)
 
 /*
  * Offset of the last Linux o32 flavoured syscall
  */
-#define __NR_Linux_syscalls		323
+#define __NR_Linux_syscalls		329
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
 
 #define __NR_O32_Linux			4000
-#define __NR_O32_Linux_syscalls		323
+#define __NR_O32_Linux_syscalls		329
 
 #if _MIPS_SIM == _MIPS_SIM_ABI64
 
@@ -644,16 +650,22 @@
 #define __NR_timerfd_create		(__NR_Linux + 280)
 #define __NR_timerfd_gettime		(__NR_Linux + 281)
 #define __NR_timerfd_settime		(__NR_Linux + 282)
+#define __NR_signalfd4			(__NR_Linux + 283)
+#define __NR_eventfd2			(__NR_Linux + 284)
+#define __NR_epoll_create1		(__NR_Linux + 285)
+#define __NR_dup3			(__NR_Linux + 286)
+#define __NR_pipe2			(__NR_Linux + 287)
+#define __NR_inotify_init1		(__NR_Linux + 288)
 
 /*
  * Offset of the last Linux 64-bit flavoured syscall
  */
-#define __NR_Linux_syscalls		282
+#define __NR_Linux_syscalls		288
 
 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
 
 #define __NR_64_Linux			5000
-#define __NR_64_Linux_syscalls		282
+#define __NR_64_Linux_syscalls		288
 
 #if _MIPS_SIM == _MIPS_SIM_NABI32
 
@@ -948,16 +960,22 @@
 #define __NR_timerfd_create		(__NR_Linux + 284)
 #define __NR_timerfd_gettime		(__NR_Linux + 285)
 #define __NR_timerfd_settime		(__NR_Linux + 286)
+#define __NR_signalfd4			(__NR_Linux + 287)
+#define __NR_eventfd2			(__NR_Linux + 288)
+#define __NR_epoll_create1		(__NR_Linux + 289)
+#define __NR_dup3			(__NR_Linux + 290)
+#define __NR_pipe2			(__NR_Linux + 291)
+#define __NR_inotify_init1		(__NR_Linux + 292)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		286
+#define __NR_Linux_syscalls		292
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		286
+#define __NR_N32_Linux_syscalls		292
 
 #ifdef __KERNEL__
 
-- 
GitLab


From 89ef3e85de5b5b95cefad2b20e1ed53435589b55 Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 31 Jul 2008 13:08:14 +0100
Subject: [PATCH 426/869] [MIPS] Jazz: Fix build error by header file inclusion
 weeding.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/jazz/setup.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index b59ba6b93cd..7043f6b9ff3 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -5,33 +5,22 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1996, 1997, 1998, 2001, 07 by Ralf Baechle
+ * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle
  * Copyright (C) 2001 MIPS Technologies, Inc.
  * Copyright (C) 2007 by Thomas Bogendoerfer
  */
 #include <linux/eisa.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/mm.h>
 #include <linux/console.h>
-#include <linux/fb.h>
-#include <linux/pm.h>
 #include <linux/screen_info.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
 #include <asm/jazz.h>
 #include <asm/jazzdma.h>
 #include <asm/reboot.h>
-#include <asm/io.h>
 #include <asm/pgtable.h>
-#include <asm/time.h>
-#include <asm/traps.h>
-#include <asm/mc146818-time.h>
 
 extern asmlinkage void jazz_handle_int(void);
 
-- 
GitLab


From 2841d8b893fd326aa039f28c3040378db8ebe8ef Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Thu, 31 Jul 2008 13:38:44 +0100
Subject: [PATCH 427/869] [MIPS] emma2rh: Fix build error by header file
 inclusion weeding.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

  CC      arch/mips/emma2rh/markeins/setup.o
In file included from arch/mips/emma2rh/markeins/setup.c:30:
include/linux/ide.h:645: error: ‘CONFIG_IDE_MAX_HWIFS’ undeclared here (not in a function)
make[1]: *** [arch/mips/emma2rh/markeins/setup.o] Error 1

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/emma2rh/markeins/setup.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 822a20e21fa..b6a23ad539f 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -25,23 +25,9 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
-#include <linux/initrd.h>
-#include <linux/irq.h>
-#include <linux/ioport.h>
-#include <linux/param.h>	/* for HZ */
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
+
 #include <asm/time.h>
-#include <asm/bcache.h>
-#include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/traps.h>
-#include <asm/debug.h>
 
 #include <asm/emma2rh/emma2rh.h>
 
-- 
GitLab


From 1374d084736fff6f72f1d143ffdaa90cddd86e7e Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Thu, 31 Jul 2008 22:29:53 +0900
Subject: [PATCH 428/869] [MIPS] TXx9: Fix mips_hpt_frequency initialization

The mips_hpt_frequency initialization code was lost in commit
94a4c32939dede9328c6e4face335eb8441fc18d (linux-mips.org) /
94a4c32939dede9328c6e4face335eb8441fc18d (kernel.org) "TXx9: Add 64-bit
support".

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/generic/setup.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 1bc57d0f4c5..0afe94c48fb 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -328,6 +328,9 @@ void __init arch_init_irq(void)
 
 void __init plat_time_init(void)
 {
+#ifdef CONFIG_CPU_TX49XX
+	mips_hpt_frequency = txx9_cpu_clock / 2;
+#endif
 	txx9_board_vec->time_init();
 }
 
-- 
GitLab


From e522b7ccd26a9774cac9379476ae3c6e005c88be Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 5 Aug 2008 23:42:16 +0100
Subject: [PATCH 429/869] [MIPS] kgdb: smp_call_function's 3rd argument is a
 pointer.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/kgdb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index c5a8b2d21ca..15dbfd9803e 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -68,7 +68,7 @@ static void kgdb_call_nmi_hook(void *ignored)
 void kgdb_roundup_cpus(unsigned long flags)
 {
 	local_irq_enable();
-	smp_call_function(kgdb_call_nmi_hook, NULL, NULL);
+	smp_call_function(kgdb_call_nmi_hook, NULL, 0);
 	local_irq_disable();
 }
 
-- 
GitLab


From 9391d6bbedfd28c20531be75a3929c62bb43676e Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 5 Aug 2008 23:43:35 +0100
Subject: [PATCH 430/869] [MIPS] kgdb: s/(void *)0)/NULL/

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/kgdb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 15dbfd9803e..66089456746 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -62,7 +62,7 @@ void arch_kgdb_breakpoint(void)
 
 static void kgdb_call_nmi_hook(void *ignored)
 {
-	kgdb_nmicallback(raw_smp_processor_id(), (void *)0);
+	kgdb_nmicallback(raw_smp_processor_id(), NULL);
 }
 
 void kgdb_roundup_cpus(unsigned long flags)
-- 
GitLab


From a571444a06257558039619a9eecfb137812670eb Mon Sep 17 00:00:00 2001
From: Ralf Baechle <ralf@linux-mips.org>
Date: Tue, 5 Aug 2008 23:44:49 +0100
Subject: [PATCH 431/869] [MIPS] IP27: Export symbol pcibus_to_node to modules.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/pci/pci-ip27.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index ce92f82b16d..bd78368c82b 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -205,6 +205,7 @@ int pcibus_to_node(struct pci_bus *bus)
 
 	return bc->nasid;
 }
+EXPORT_SYMBOL(pcibus_to_node);
 
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
 	pci_fixup_ioc3);
-- 
GitLab


From 1ddfe82dc687bd786cc75c0ea973588394665e60 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Tue, 5 Aug 2008 22:24:18 +0200
Subject: [PATCH 432/869] [MIPS] RB532: Do not define registers that are
 already defined

Use the register definitions of the MPMC controller from
mach-rc32434/rb.h instead of redefining them.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/rb532/devices.c | 16 +++-------------
 1 file changed, 3 insertions(+), 13 deletions(-)

diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 44fb0a62877..82ab395efa3 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -49,8 +49,6 @@
 #define GPIO_ALE (1 << 0x0a)
 #define GPIO_CLE (1 << 0x0b)
 
-extern char *board_type;
-
 static struct resource korina_dev0_res[] = {
 	{
 		.name = "korina_regs",
@@ -265,14 +263,6 @@ static void __init parse_mac_addr(char *macstr)
 }
 
 
-/* DEVICE CONTROLLER 1 */
-#define CFG_DC_DEV1 	((void *)0xb8010010)
-#define CFG_DC_DEV2 	((void *)0xb8010020)
-#define CFG_DC_DEVBASE    0x0
-#define CFG_DC_DEVMASK    0x4
-#define CFG_DC_DEVC       0x8
-#define CFG_DC_DEVTC      0xC
-
 /* NAND definitions */
 #define NAND_CHIP_DELAY	25
 
@@ -301,16 +291,16 @@ static void __init rb532_nand_setup(void)
 static int __init plat_setup_devices(void)
 {
 	/* Look for the CF card reader */
-	if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
+	if (!readl(IDT434_REG_BASE + DEV1MASK))
 		rb532_devs[1] = NULL;
 	else {
 		cf_slot0_res[0].start =
-		    readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
+		    readl(IDT434_REG_BASE + DEV1BASE);
 		cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
 	}
 
 	/* Read the NAND resources from the device controller */
-	nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
+	nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE);
 	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
 
 	/* Initialise the NAND device */
-- 
GitLab


From b895760dfb9b7ab921b066141d618bc6877f5d4b Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Mon, 11 Aug 2008 23:05:35 +0900
Subject: [PATCH 433/869] [MIPS] kgdb: Do not call fixup_exception

kgdb_mips_notify is called on IBE/DBE/FPE/BP/TRAP/RI exception.  None
of them need fixup.  And doing fixup for a breakpoint exception will
confuse gdb.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/kgdb.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
index 66089456746..8f6d58ede33 100644
--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -190,9 +190,6 @@ static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
 	struct pt_regs *regs = args->regs;
 	int trap = (regs->cp0_cause & 0x7c) >> 2;
 
-	if (fixup_exception(regs))
-		return NOTIFY_DONE;
-
 	/* Userpace events, ignore. */
 	if (user_mode(regs))
 		return NOTIFY_DONE;
-- 
GitLab


From 3e6259c3ef30432b4a067d6362738c236eb2e680 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Tue, 19 Aug 2008 21:28:21 +0200
Subject: [PATCH 434/869] [MIPS] Ignore vmlinux.lds generated files

This patch adds the proper .gitignore file to ignore vmlinux.lds generated
in arch/mips/kernel/.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/.gitignore | 1 +
 1 file changed, 1 insertion(+)
 create mode 100644 arch/mips/kernel/.gitignore

diff --git a/arch/mips/kernel/.gitignore b/arch/mips/kernel/.gitignore
new file mode 100644
index 00000000000..c5f676c3c22
--- /dev/null
+++ b/arch/mips/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
-- 
GitLab


From 2189459d25a47401c69a17794c9d390c890351f9 Mon Sep 17 00:00:00 2001
From: Joe Korty <joe.korty@ccur.com>
Date: Mon, 25 Aug 2008 17:15:33 -0400
Subject: [PATCH 435/869] lockstat: fix numerical output rounding error

Fix rounding error in /proc/lock_stat numerical output.

On occasion the two digit fractional part contains the three
digit value '100'.  This is due to a bug in the rounding algorithm
which pushes values in the range '95..99' to '100' rather than
to '00' + an increment to the integer part.  For example,

	- 123456.100      old display
	+ 123457.00	  new display

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/lockdep_proc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c
index 4b194d34d77..20dbcbf9c7d 100644
--- a/kernel/lockdep_proc.c
+++ b/kernel/lockdep_proc.c
@@ -472,8 +472,9 @@ static void snprint_time(char *buf, size_t bufsiz, s64 nr)
 {
 	unsigned long rem;
 
+	nr += 5; /* for display rounding */
 	rem = do_div(nr, 1000); /* XXX: do_div_signed */
-	snprintf(buf, bufsiz, "%lld.%02d", (long long)nr, ((int)rem+5)/10);
+	snprintf(buf, bufsiz, "%lld.%02d", (long long)nr, (int)rem/10);
 }
 
 static void seq_time(struct seq_file *m, s64 time)
-- 
GitLab


From 04148b73b89d49fe0fe201bcee395e51f7d637ce Mon Sep 17 00:00:00 2001
From: Joe Korty <joe.korty@ccur.com>
Date: Mon, 25 Aug 2008 17:16:23 -0400
Subject: [PATCH 436/869] lockstat: repair erronous contention statistics

Fix bad contention counting in /proc/lock_stat.

/proc/lockstat tries to gather per-ip contention
statistics per-lock.  This was failing due to
a garbage per-ip index selector being used.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/lockdep.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index 3bfb1877a00..b5db51d2803 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -3029,7 +3029,7 @@ found_it:
 
 	stats = get_lock_stats(hlock_class(hlock));
 	if (point < ARRAY_SIZE(stats->contention_point))
-		stats->contention_point[i]++;
+		stats->contention_point[point]++;
 	if (lock->cpu != smp_processor_id())
 		stats->bounces[bounce_contended + !!hlock->read]++;
 	put_lock_stats(stats);
-- 
GitLab


From 3d839e5b87a70effc629c1cdbf77d837ef141919 Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Tue, 26 Aug 2008 11:06:26 +0200
Subject: [PATCH 437/869] ALSA: oxygen: prevent muting of nonexistent AC97
 controls

The Xonar DX does not have CD Capture controls, so we have to check that
a control actually exists before muting it.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/oxygen/oxygen_mixer.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c
index 6facac5aed9..05eb8994c14 100644
--- a/sound/pci/oxygen/oxygen_mixer.c
+++ b/sound/pci/oxygen/oxygen_mixer.c
@@ -512,9 +512,12 @@ static int ac97_switch_get(struct snd_kcontrol *ctl,
 
 static void mute_ac97_ctl(struct oxygen *chip, unsigned int control)
 {
-	unsigned int priv_idx = chip->controls[control]->private_value & 0xff;
+	unsigned int priv_idx;
 	u16 value;
 
+	if (!chip->controls[control])
+		return;
+	priv_idx = chip->controls[control]->private_value & 0xff;
 	value = oxygen_read_ac97(chip, 0, priv_idx);
 	if (!(value & 0x8000)) {
 		oxygen_write_ac97(chip, 0, priv_idx, value | 0x8000);
-- 
GitLab


From e784539fe81490a982a013621d39a60c4fce427e Mon Sep 17 00:00:00 2001
From: Jarkko Nikula <jarkko.nikula@nokia.com>
Date: Tue, 26 Aug 2008 13:32:57 +0300
Subject: [PATCH 438/869] ALSA: ASoC: Fix error paths in N810 machine driver
 init and release clocks at exit

Thanks to Felipe Balbi <felipe.balbi@nokia.com> by noticing that if clk_get
to sys_clkout2_src fails, then n810_snd_device is never released.

Add also sys_clkout2_src release into error path, error code return and
release the clocks at exit.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/omap/n810.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 7694621ec40..87d0ed01f65 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -329,12 +329,14 @@ static int __init n810_soc_init(void)
 	sys_clkout2_src = clk_get(dev, "sys_clkout2_src");
 	if (IS_ERR(sys_clkout2_src)) {
 		dev_err(dev, "Could not get sys_clkout2_src clock\n");
-		return -ENODEV;
+		err = PTR_ERR(sys_clkout2_src);
+		goto err2;
 	}
 	sys_clkout2 = clk_get(dev, "sys_clkout2");
 	if (IS_ERR(sys_clkout2)) {
 		dev_err(dev, "Could not get sys_clkout2\n");
-		goto err1;
+		err = PTR_ERR(sys_clkout2);
+		goto err3;
 	}
 	/*
 	 * Configure 12 MHz output on SYS_CLKOUT2. Therefore we must use
@@ -343,7 +345,8 @@ static int __init n810_soc_init(void)
 	func96m_clk = clk_get(dev, "func_96m_ck");
 	if (IS_ERR(func96m_clk)) {
 		dev_err(dev, "Could not get func 96M clock\n");
-		goto err2;
+		err = PTR_ERR(func96m_clk);
+		goto err4;
 	}
 	clk_set_parent(sys_clkout2_src, func96m_clk);
 	clk_set_rate(sys_clkout2, 12000000);
@@ -356,20 +359,25 @@ static int __init n810_soc_init(void)
 	gpio_direction_output(N810_SPEAKER_AMP_GPIO, 0);
 
 	return 0;
-err2:
+err4:
 	clk_put(sys_clkout2);
+err3:
+	clk_put(sys_clkout2_src);
+err2:
 	platform_device_del(n810_snd_device);
 err1:
 	platform_device_put(n810_snd_device);
 
 	return err;
-
 }
 
 static void __exit n810_soc_exit(void)
 {
 	gpio_free(N810_SPEAKER_AMP_GPIO);
 	gpio_free(N810_HEADSET_AMP_GPIO);
+	clk_put(sys_clkout2_src);
+	clk_put(sys_clkout2);
+	clk_put(func96m_clk);
 
 	platform_device_unregister(n810_snd_device);
 }
-- 
GitLab


From f8787fdcf6f46d6a65a42dbddb70cd7e4dc5b741 Mon Sep 17 00:00:00 2001
From: Mark Brown <broonie@sirena.org.uk>
Date: Tue, 26 Aug 2008 13:30:03 +0100
Subject: [PATCH 439/869] [ARM] 5225/1: zaurus: Register I2C controller for
 audio codecs

corgi, spitz and poodle have audio codecs on their primary I2C bus so
need to call pxa_set_i2c_info() to set it up during init. Tested on
spitz by Stanislav.

Reported-by: Stanislav Brabec <utx@penguin.cz>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-pxa/corgi.c  | 2 ++
 arch/arm/mach-pxa/poodle.c | 2 ++
 arch/arm/mach-pxa/spitz.c  | 2 ++
 3 files changed, 6 insertions(+)

diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 123a950db46..e703a8d209e 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -38,6 +38,7 @@
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/pxa2xx-gpio.h>
+#include <mach/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
@@ -532,6 +533,7 @@ static void __init corgi_init(void)
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
 
 	platform_scoop_config = &corgi_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 055ec63d768..3f5f484549b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -36,6 +36,7 @@
 #include <mach/pxa2xx-gpio.h>
 #include <mach/mmc.h>
 #include <mach/udc.h>
+#include <mach/i2c.h>
 #include <mach/irda.h>
 #include <mach/poodle.h>
 #include <mach/pxafb.h>
@@ -387,6 +388,7 @@ static void __init poodle_init(void)
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
 
 	platform_scoop_config = &poodle_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index cd39005c98f..b569f3b4cf3 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -40,6 +40,7 @@
 #include <mach/pxa2xx-gpio.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/reset.h>
+#include <mach/i2c.h>
 #include <mach/irda.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
@@ -574,6 +575,7 @@ static void __init common_init(void)
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
 	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
+	pxa_set_i2c_info(NULL);
 }
 
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-- 
GitLab


From 5770a3fb5f8544d40ae03b010318345cdd05d662 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@infradead.org>
Date: Tue, 26 Aug 2008 15:29:22 +0100
Subject: [PATCH 440/869] Fix userspace export of <linux/net.h>

Including <linux/fcntl.h> in the user-visible part of this header has
caused build regressions with headers from 2.6.27-rc. Move it down to
the #ifdef __KERNEL__ part, which is the only place it's needed. Move
some other kernel-only things down there too, while we're at it.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/net.h | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/include/linux/net.h b/include/linux/net.h
index 4a9a30f2d68..6dc14a24004 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -18,16 +18,9 @@
 #ifndef _LINUX_NET_H
 #define _LINUX_NET_H
 
-#include <linux/wait.h>
 #include <linux/socket.h>
-#include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
 #include <asm/socket.h>
 
-struct poll_table_struct;
-struct pipe_inode_info;
-struct inode;
-struct net;
-
 #define NPROTO		AF_MAX
 
 #define SYS_SOCKET	1		/* sys_socket(2)		*/
@@ -62,6 +55,13 @@ typedef enum {
 #ifdef __KERNEL__
 #include <linux/stringify.h>
 #include <linux/random.h>
+#include <linux/wait.h>
+#include <linux/fcntl.h>	/* For O_CLOEXEC and O_NONBLOCK */
+
+struct poll_table_struct;
+struct pipe_inode_info;
+struct inode;
+struct net;
 
 #define SOCK_ASYNC_NOSPACE	0
 #define SOCK_ASYNC_WAITDATA	1
-- 
GitLab


From e9775843ecb039318dbc9ded6da9c762bff28a0b Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Tue, 26 Aug 2008 18:22:50 +0000
Subject: [PATCH 441/869] [CIFS] Correct keys dependency for cifs kerberos
 support

Must also depend on CIFS ...

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/Kconfig b/fs/Kconfig
index f0427105a61..3fab3901e0e 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1984,7 +1984,7 @@ config CIFS_EXPERIMENTAL
 
 config CIFS_UPCALL
 	  bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
-	  depends on KEYS
+	  depends on CIFS && KEYS
 	  help
 	    Enables an upcall mechanism for CIFS which accesses
 	    userspace helper utilities to provide SPNEGO packaged (RFC 4178)
-- 
GitLab


From 96c2a1137b9e00bcdbe3a95113ea8f42ca994f76 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Tue, 26 Aug 2008 18:32:28 +0000
Subject: [PATCH 442/869] [CIFS] Reorder cifs config item for better clarity

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/Kconfig | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/fs/Kconfig b/fs/Kconfig
index 3fab3901e0e..abccb5dab9a 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -1930,6 +1930,16 @@ config CIFS_WEAK_PW_HASH
 
 	  If unsure, say N.
 
+config CIFS_UPCALL
+	  bool "Kerberos/SPNEGO advanced session setup"
+	  depends on CIFS && KEYS
+	  help
+	    Enables an upcall mechanism for CIFS which accesses
+	    userspace helper utilities to provide SPNEGO packaged (RFC 4178)
+	    Kerberos tickets which are needed to mount to certain secure servers
+	    (for which more secure Kerberos authentication is required). If
+	    unsure, say N.
+
 config CIFS_XATTR
         bool "CIFS extended attributes"
         depends on CIFS
@@ -1982,16 +1992,6 @@ config CIFS_EXPERIMENTAL
 	    (which is disabled by default). See the file fs/cifs/README 
 	    for more details.  If unsure, say N.
 
-config CIFS_UPCALL
-	  bool "Kerberos/SPNEGO advanced session setup (EXPERIMENTAL)"
-	  depends on CIFS && KEYS
-	  help
-	    Enables an upcall mechanism for CIFS which accesses
-	    userspace helper utilities to provide SPNEGO packaged (RFC 4178)
-	    Kerberos tickets which are needed to mount to certain secure servers
-	    (for which more secure Kerberos authentication is required). If
-	    unsure, say N.
-
 config CIFS_DFS_UPCALL
 	  bool "DFS feature support (EXPERIMENTAL)"
 	  depends on CIFS_EXPERIMENTAL
-- 
GitLab


From b4253f8fc1293cdbfb6a474394e1a66febb70e3d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 22 Jun 2008 22:36:49 +0100
Subject: [PATCH 443/869] [WATCHDOG] Fix NULL usage in s3c2410_wdt driver.

Fix comparison of a pointer to 0, instead of using
NULL for a invalid pointer.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/s3c2410_wdt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 22715e3be5e..27af55f193d 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -374,7 +374,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	}
 
 	wdt_base = ioremap(res->start, size);
-	if (wdt_base == 0) {
+	if (wdt_base == NULL) {
 		dev_err(dev, "failed to ioremap() region\n");
 		ret = -EINVAL;
 		goto err_req;
-- 
GitLab


From 9e3eaf149043f29cfcb77c2fa163dfa1d2ccbfab Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 22 Jun 2008 22:36:50 +0100
Subject: [PATCH 444/869] [WATCHDOG] Clean out header of s3c2410_wdt driver.

Remove the changelog from the top of the driver, which
is redundant as this information is more accurately
represented from the revision control holding the
file.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/s3c2410_wdt.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 27af55f193d..825dbd51a94 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -21,18 +21,6 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Changelog:
- *	05-Oct-2004	BJD	Added semaphore init to stop crashes on open
- *				Fixed tmr_count / wdt_count confusion
- *				Added configurable debug
- *
- *	11-Jan-2005	BJD	Fixed divide-by-2 in timeout code
- *
- *	25-Jan-2005	DA	Added suspend/resume support
- *				Replaced reboot notifier with .shutdown method
- *
- *	10-Mar-2005	LCVR	Changed S3C2410_VA to S3C24XX_VA
 */
 
 #include <linux/module.h>
-- 
GitLab


From 0e65fb2978467a3538af69858ae6bc13d332b9b2 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 22 Jun 2008 22:36:51 +0100
Subject: [PATCH 445/869] [WATCHDOG] Fix s3c2410_wdt driver coding style issues

Fixup coding style issues in the s3c2410_wdt driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/s3c2410_wdt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 825dbd51a94..86d42801de4 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -353,7 +353,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 		return -ENOENT;
 	}
 
-	size = (res->end-res->start)+1;
+	size = (res->end - res->start) + 1;
 	wdt_mem = request_mem_region(res->start, size, pdev->name);
 	if (wdt_mem == NULL) {
 		dev_err(dev, "failed to get memory region\n");
-- 
GitLab


From eaa95eb6ea43e6de8bea702c13556de9a1a1195a Mon Sep 17 00:00:00 2001
From: Jochen Friedrich <jochen@scram.de>
Date: Thu, 24 Jul 2008 12:22:05 +0200
Subject: [PATCH 446/869] [WATHDOG] delete unused driver mpc8xx_wdt.c

The watchdog driver mpc8xx_wdt.c was a device interface to
arch/ppc/syslib/m8xx_wdt.c for MPC8xx hardware. Now that ARCH=ppc is
gone, this driver is of no more use. For ARCH=powerpc, MPC8xx hardware
is supported by mpc8xxx_wdt.c.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 drivers/watchdog/Kconfig      |   4 -
 drivers/watchdog/Makefile     |   1 -
 drivers/watchdog/mpc8xx_wdt.c | 170 ----------------------------------
 3 files changed, 175 deletions(-)
 delete mode 100644 drivers/watchdog/mpc8xx_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index db20542796b..a8e80f2eb8a 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -692,10 +692,6 @@ config MPC5200_WDT
 	tristate "MPC5200 Watchdog Timer"
 	depends on PPC_MPC52xx
 
-config 8xx_WDT
-	tristate "MPC8xx Watchdog Timer"
-	depends on 8xx
-
 config 8xxx_WDT
 	tristate "MPC8xxx Platform Watchdog Timer"
 	depends on PPC_8xx || PPC_83xx || PPC_86xx
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index ca3dc043d78..1b5c0118cfe 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -104,7 +104,6 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
 # PARISC Architecture
 
 # POWERPC Architecture
-obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
 obj-$(CONFIG_MPC5200_WDT) += mpc5200_wdt.o
 obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
 obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
diff --git a/drivers/watchdog/mpc8xx_wdt.c b/drivers/watchdog/mpc8xx_wdt.c
deleted file mode 100644
index 1336425acf2..00000000000
--- a/drivers/watchdog/mpc8xx_wdt.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * mpc8xx_wdt.c - MPC8xx watchdog userspace interface
- *
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/watchdog.h>
-#include <asm/8xx_immap.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <syslib/m8xx_wdt.h>
-
-static unsigned long wdt_opened;
-static int wdt_status;
-static spinlock_t wdt_lock;
-
-static void mpc8xx_wdt_handler_disable(void)
-{
-	volatile uint __iomem *piscr;
-	piscr = (uint *)&((immap_t *)IMAP_ADDR)->im_sit.sit_piscr;
-
-	if (!m8xx_has_internal_rtc)
-		m8xx_wdt_stop_timer();
-	else
-		out_be32(piscr, in_be32(piscr) & ~(PISCR_PIE | PISCR_PTE));
-	printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler deactivated\n");
-}
-
-static void mpc8xx_wdt_handler_enable(void)
-{
-	volatile uint __iomem *piscr;
-	piscr = (uint *)&((immap_t *)IMAP_ADDR)->im_sit.sit_piscr;
-
-	if (!m8xx_has_internal_rtc)
-		m8xx_wdt_install_timer();
-	else
-		out_be32(piscr, in_be32(piscr) | PISCR_PIE | PISCR_PTE);
-	printk(KERN_NOTICE "mpc8xx_wdt: keep-alive handler activated\n");
-}
-
-static int mpc8xx_wdt_open(struct inode *inode, struct file *file)
-{
-	if (test_and_set_bit(0, &wdt_opened))
-		return -EBUSY;
-	m8xx_wdt_reset();
-	mpc8xx_wdt_handler_disable();
-	return nonseekable_open(inode, file);
-}
-
-static int mpc8xx_wdt_release(struct inode *inode, struct file *file)
-{
-	m8xx_wdt_reset();
-#if !defined(CONFIG_WATCHDOG_NOWAYOUT)
-	mpc8xx_wdt_handler_enable();
-#endif
-	clear_bit(0, &wdt_opened);
-	return 0;
-}
-
-static ssize_t mpc8xx_wdt_write(struct file *file, const char *data,
-						size_t len, loff_t *ppos)
-{
-	if (len) {
-		spin_lock(&wdt_lock);
-		m8xx_wdt_reset();
-		spin_unlock(&wdt_lock);
-	}
-	return len;
-}
-
-static long mpc8xx_wdt_ioctl(struct file *file,
-					unsigned int cmd, unsigned long arg)
-{
-	int timeout;
-	static struct watchdog_info info = {
-		.options = WDIOF_KEEPALIVEPING,
-		.firmware_version = 0,
-		.identity = "MPC8xx watchdog",
-	};
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		if (copy_to_user((void *)arg, &info, sizeof(info)))
-			return -EFAULT;
-		break;
-
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		if (put_user(wdt_status, (int *)arg))
-			return -EFAULT;
-		wdt_status &= ~WDIOF_KEEPALIVEPING;
-		break;
-
-	case WDIOC_GETTEMP:
-		return -EOPNOTSUPP;
-
-	case WDIOC_SETOPTIONS:
-		return -EOPNOTSUPP;
-
-	case WDIOC_KEEPALIVE:
-		spin_lock(&wdt_lock);
-		m8xx_wdt_reset();
-		wdt_status |= WDIOF_KEEPALIVEPING;
-		spin_unlock(&wdt_lock);
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		return -EOPNOTSUPP;
-
-	case WDIOC_GETTIMEOUT:
-		spin_lock(&wdt_lock);
-		timeout = m8xx_wdt_get_timeout();
-		spin_unlock(&wdt_lock);
-		if (put_user(timeout, (int *)arg))
-			return -EFAULT;
-		break;
-
-	default:
-		return -ENOTTY;
-	}
-
-	return 0;
-}
-
-static const struct file_operations mpc8xx_wdt_fops = {
-	.owner = THIS_MODULE,
-	.llseek = no_llseek,
-	.write = mpc8xx_wdt_write,
-	.unlocked_ioctl = mpc8xx_wdt_ioctl,
-	.open = mpc8xx_wdt_open,
-	.release = mpc8xx_wdt_release,
-};
-
-static struct miscdevice mpc8xx_wdt_miscdev = {
-	.minor = WATCHDOG_MINOR,
-	.name = "watchdog",
-	.fops = &mpc8xx_wdt_fops,
-};
-
-static int __init mpc8xx_wdt_init(void)
-{
-	spin_lock_init(&wdt_lock);
-	return misc_register(&mpc8xx_wdt_miscdev);
-}
-
-static void __exit mpc8xx_wdt_exit(void)
-{
-	misc_deregister(&mpc8xx_wdt_miscdev);
-
-	m8xx_wdt_reset();
-	mpc8xx_wdt_handler_enable();
-}
-
-module_init(mpc8xx_wdt_init);
-module_exit(mpc8xx_wdt_exit);
-
-MODULE_AUTHOR("Florian Schirmer <jolt@tuxbox.org>");
-MODULE_DESCRIPTION("MPC8xx watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-- 
GitLab


From b3e8f2c13ae964a8889fe96a2f3f7fd7e0cfae76 Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Mon, 25 Feb 2008 12:59:26 +0100
Subject: [PATCH 447/869] [WATCHDOG] Add support for the built-int RDC R-321x
 SoC watchdog

This patch adds support for the built-in RDC R-321x SoC watchdog.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/Kconfig       |  10 ++
 drivers/watchdog/Makefile      |   1 +
 drivers/watchdog/rdc321x_wdt.c | 285 +++++++++++++++++++++++++++++++++
 3 files changed, 296 insertions(+)
 create mode 100644 drivers/watchdog/rdc321x_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index a8e80f2eb8a..a1f47c7d7cd 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -465,6 +465,16 @@ config PC87413_WDT
 
 	  Most people will say N.
 
+config RDC321X_WDT
+	tristate "RDC R-321x SoC watchdog"
+	depends on X86_RDC321X
+	help
+	  This is the driver for the built in hardware watchdog
+	  in the RDC R-321x SoC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rdc321x_wdt.
+
 config 60XX_WDT
 	tristate "SBC-60XX Watchdog Timer"
 	depends on X86
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 1b5c0118cfe..a88be6fdadf 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
 obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
 obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
 obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
+obj-$(CONFIG_RDC321X_WDT) += rdc321x_wdt.o
 obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
 obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
 obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o
diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c
new file mode 100644
index 00000000000..9108efa73e7
--- /dev/null
+++ b/drivers/watchdog/rdc321x_wdt.c
@@ -0,0 +1,285 @@
+/*
+ * RDC321x watchdog driver
+ *
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This driver is highly inspired from the cpu5_wdt driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/mach-rdc321x/rdc321x_defs.h>
+
+#define RDC_WDT_MASK	0x80000000 /* Mask */
+#define RDC_WDT_EN	0x00800000 /* Enable bit */
+#define RDC_WDT_WTI	0x00200000 /* Generate CPU reset/NMI/WDT on timeout */
+#define RDC_WDT_RST	0x00100000 /* Reset bit */
+#define RDC_WDT_WIF	0x00040000 /* WDT IRQ Flag */
+#define RDC_WDT_IRT	0x00000100 /* IRQ Routing table */
+#define RDC_WDT_CNT	0x00000001 /* WDT count */
+
+#define RDC_CLS_TMR	0x80003844 /* Clear timer */
+
+#define RDC_WDT_INTERVAL	(HZ/10+1)
+
+static int ticks = 1000;
+
+/* some device data */
+
+static struct {
+	struct completion stop;
+	int running;
+	struct timer_list timer;
+	int queue;
+	int default_ticks;
+	unsigned long inuse;
+	spinlock_t lock;
+} rdc321x_wdt_device;
+
+/* generic helper functions */
+
+static void rdc321x_wdt_trigger(unsigned long unused)
+{
+	unsigned long flags;
+
+	if (rdc321x_wdt_device.running)
+		ticks--;
+
+	/* keep watchdog alive */
+	spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+	outl(RDC_WDT_EN | inl(RDC3210_CFGREG_DATA),
+		RDC3210_CFGREG_DATA);
+	spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+
+	/* requeue?? */
+	if (rdc321x_wdt_device.queue && ticks)
+		mod_timer(&rdc321x_wdt_device.timer,
+				jiffies + RDC_WDT_INTERVAL);
+	else {
+		/* ticks doesn't matter anyway */
+		complete(&rdc321x_wdt_device.stop);
+	}
+
+}
+
+static void rdc321x_wdt_reset(void)
+{
+	ticks = rdc321x_wdt_device.default_ticks;
+}
+
+static void rdc321x_wdt_start(void)
+{
+	unsigned long flags;
+
+	if (!rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 1;
+
+		/* Clear the timer */
+		spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+		outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
+
+		/* Enable watchdog and set the timeout to 81.92 us */
+		outl(RDC_WDT_EN | RDC_WDT_CNT, RDC3210_CFGREG_DATA);
+		spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+
+		mod_timer(&rdc321x_wdt_device.timer,
+				jiffies + RDC_WDT_INTERVAL);
+	}
+
+	/* if process dies, counter is not decremented */
+	rdc321x_wdt_device.running++;
+}
+
+static int rdc321x_wdt_stop(void)
+{
+	if (rdc321x_wdt_device.running)
+		rdc321x_wdt_device.running = 0;
+
+	ticks = rdc321x_wdt_device.default_ticks;
+
+	return -EIO;
+}
+
+/* filesystem operations */
+static int rdc321x_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
+		return -EBUSY;
+
+	return nonseekable_open(inode, file);
+}
+
+static int rdc321x_wdt_release(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+	return 0;
+}
+
+static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file,
+				unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	unsigned int value;
+	static struct watchdog_info ident = {
+		.options = WDIOF_CARDRESET,
+		.identity = "RDC321x WDT",
+	};
+	unsigned long flags;
+
+	switch (cmd) {
+	case WDIOC_KEEPALIVE:
+		rdc321x_wdt_reset();
+		break;
+	case WDIOC_GETSTATUS:
+		/* Read the value from the DATA register */
+		spin_lock_irqsave(&rdc321x_wdt_device.lock, flags);
+		value = inl(RDC3210_CFGREG_DATA);
+		spin_unlock_irqrestore(&rdc321x_wdt_device.lock, flags);
+		if (copy_to_user(argp, &value, sizeof(int)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&value, argp, sizeof(int)))
+			return -EFAULT;
+		switch (value) {
+		case WDIOS_ENABLECARD:
+			rdc321x_wdt_start();
+			break;
+		case WDIOS_DISABLECARD:
+			return rdc321x_wdt_stop();
+		default:
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -ENOTTY;
+	}
+	return 0;
+}
+
+static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	if (!count)
+		return -EIO;
+
+	rdc321x_wdt_reset();
+
+	return count;
+}
+
+static const struct file_operations rdc321x_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.ioctl		= rdc321x_wdt_ioctl,
+	.open		= rdc321x_wdt_open,
+	.write		= rdc321x_wdt_write,
+	.release	= rdc321x_wdt_release,
+};
+
+static struct miscdevice rdc321x_wdt_misc = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rdc321x_wdt_fops,
+};
+
+static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
+{
+	int err;
+
+	err = misc_register(&rdc321x_wdt_misc);
+	if (err < 0) {
+		printk(KERN_ERR PFX "watchdog misc_register failed\n");
+		return err;
+	}
+
+	spin_lock_init(&rdc321x_wdt_device.lock);
+
+	/* Reset the watchdog */
+	outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
+
+	init_completion(&rdc321x_wdt_device.stop);
+	rdc321x_wdt_device.queue = 0;
+
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+
+	setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
+
+	rdc321x_wdt_device.default_ticks = ticks;
+
+	printk(KERN_INFO PFX "watchdog init success\n");
+
+	return 0;
+}
+
+static int rdc321x_wdt_remove(struct platform_device *pdev)
+{
+	if (rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 0;
+		wait_for_completion(&rdc321x_wdt_device.stop);
+	}
+
+	misc_deregister(&rdc321x_wdt_misc);
+
+	return 0;
+}
+
+static struct platform_driver rdc321x_wdt_driver = {
+	.probe = rdc321x_wdt_probe,
+	.remove = rdc321x_wdt_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "rdc321x-wdt",
+	},
+};
+
+static int __init rdc321x_wdt_init(void)
+{
+	return platform_driver_register(&rdc321x_wdt_driver);
+}
+
+static void __exit rdc321x_wdt_exit(void)
+{
+	platform_driver_unregister(&rdc321x_wdt_driver);
+}
+
+module_init(rdc321x_wdt_init);
+module_exit(rdc321x_wdt_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-- 
GitLab


From 03ec58568a3c66cac4b23ff74db95c966a1521de Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian.fainelli@telecomint.eu>
Date: Mon, 25 Feb 2008 13:11:31 +0100
Subject: [PATCH 448/869] [WATCHDOG] Add support for the IDT RC32434 watchdog

Add driver for the IDT RC32434 SoC built-in watchdog.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/Kconfig       |  10 +
 drivers/watchdog/Makefile      |   1 +
 drivers/watchdog/rc32434_wdt.c | 344 +++++++++++++++++++++++++++++++++
 3 files changed, 355 insertions(+)
 create mode 100644 drivers/watchdog/rc32434_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index a1f47c7d7cd..c5103671670 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -643,6 +643,16 @@ config SBC_EPX_C3_WATCHDOG
 
 # MIPS Architecture
 
+config RC32434_WDT
+	tristate "IDT RC32434 SoC Watchdog Timer"
+	depends on MIKROTIK_RB532
+	help
+	  Hardware driver for the IDT RC32434 SoC built-in
+	  watchdog timer.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rc32434_wdt.
+
 config INDYDOG
 	tristate "Indy/I2 Hardware Watchdog"
 	depends on SGI_HAS_INDYDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index a88be6fdadf..e0ef123fbde 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
 # M68KNOMMU Architecture
 
 # MIPS Architecture
+obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
 obj-$(CONFIG_INDYDOG) += indydog.o
 obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
 obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
new file mode 100644
index 00000000000..6756bcb009e
--- /dev/null
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -0,0 +1,344 @@
+/*
+ *  IDT Interprise 79RC32434 watchdog driver
+ *
+ *  Copyright (C) 2006, Ondrej Zajicek <santiago@crfreenet.org>
+ *  Copyright (C) 2008, Florian Fainelli <florian@openwrt.org>
+ *
+ *  based on
+ *  SoftDog 0.05:	A Software Watchdog Device
+ *
+ *  (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/reboot.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/mach-rc32434/integ.h>
+
+#define MAX_TIMEOUT			20
+#define RC32434_WDT_INTERVAL		(15 * HZ)
+
+#define VERSION "0.2"
+
+static struct {
+	struct completion stop;
+	int running;
+	struct timer_list timer;
+	int queue;
+	int default_ticks;
+	unsigned long inuse;
+} rc32434_wdt_device;
+
+static struct integ __iomem *wdt_reg;
+static int ticks = 100 * HZ;
+
+static int expect_close;
+static int timeout;
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+
+static void rc32434_wdt_start(void)
+{
+	u32 val;
+
+	if (!rc32434_wdt_device.inuse) {
+		writel(0, &wdt_reg->wtcount);
+
+		val = RC32434_ERR_WRE;
+		writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+
+		val = RC32434_WTC_EN;
+		writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
+	}
+	rc32434_wdt_device.running++;
+}
+
+static void rc32434_wdt_stop(void)
+{
+	u32 val;
+
+	if (rc32434_wdt_device.running) {
+
+		val = ~RC32434_WTC_EN;
+		writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+
+		val = ~RC32434_ERR_WRE;
+		writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
+
+		rc32434_wdt_device.running = 0;
+	}
+}
+
+static void rc32434_wdt_set(int new_timeout)
+{
+	u32 cmp = new_timeout * HZ;
+	u32 state, val;
+
+	timeout = new_timeout;
+	/*
+	 * store and disable WTC
+	 */
+	state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
+	val = ~RC32434_WTC_EN;
+	writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+
+	writel(0, &wdt_reg->wtcount);
+	writel(cmp, &wdt_reg->wtcompare);
+
+	/*
+	 * restore WTC
+	 */
+
+	writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
+}
+
+static void rc32434_wdt_reset(void)
+{
+	ticks = rc32434_wdt_device.default_ticks;
+}
+
+static void rc32434_wdt_update(unsigned long unused)
+{
+	if (rc32434_wdt_device.running)
+		ticks--;
+
+	writel(0, &wdt_reg->wtcount);
+
+	if (rc32434_wdt_device.queue && ticks)
+		mod_timer(&rc32434_wdt_device.timer,
+			jiffies + RC32434_WDT_INTERVAL);
+	else
+		complete(&rc32434_wdt_device.stop);
+}
+
+static int rc32434_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rc32434_wdt_device.inuse))
+		return -EBUSY;
+
+	if (nowayout)
+		__module_get(THIS_MODULE);
+
+	return nonseekable_open(inode, file);
+}
+
+static int rc32434_wdt_release(struct inode *inode, struct file *file)
+{
+	if (expect_close && nowayout == 0) {
+		rc32434_wdt_stop();
+		printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
+		module_put(THIS_MODULE);
+	} else
+		printk(KERN_CRIT KBUILD_MODNAME
+			": device closed unexpectedly. WDT will not stop !\n");
+
+	clear_bit(0, &rc32434_wdt_device.inuse);
+	return 0;
+}
+
+static ssize_t rc32434_wdt_write(struct file *file, const char *data,
+				size_t len, loff_t *ppos)
+{
+	if (len) {
+		if (!nowayout) {
+			size_t i;
+
+			/* In case it was set long ago */
+			expect_close = 0;
+
+			for (i = 0; i != len; i++) {
+				char c;
+				if (get_user(c, data + i))
+					return -EFAULT;
+				if (c == 'V')
+					expect_close = 1;
+			}
+		}
+		rc32434_wdt_update(0);
+		return len;
+	}
+	return 0;
+}
+
+static int rc32434_wdt_ioctl(struct inode *inode, struct file *file,
+	unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	int new_timeout;
+	unsigned int value;
+	static struct watchdog_info ident = {
+		.options =		WDIOF_SETTIMEOUT |
+					WDIOF_KEEPALIVEPING |
+					WDIOF_MAGICCLOSE,
+		.identity =		"RC32434_WDT Watchdog",
+	};
+	switch (cmd) {
+	case WDIOC_KEEPALIVE:
+		rc32434_wdt_reset();
+		break;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		value = readl(&wdt_reg->wtcount);
+		if (copy_to_user(argp, &value, sizeof(int)))
+			return -EFAULT;
+		break;
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &ident, sizeof(ident)))
+			return -EFAULT;
+		break;
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&value, argp, sizeof(int)))
+			return -EFAULT;
+		switch (value) {
+		case WDIOS_ENABLECARD:
+			rc32434_wdt_start();
+			break;
+		case WDIOS_DISABLECARD:
+			rc32434_wdt_stop();
+		default:
+			return -EINVAL;
+		}
+		break;
+	case WDIOC_SETTIMEOUT:
+		if (copy_from_user(&new_timeout, argp, sizeof(int)))
+			return -EFAULT;
+		if (new_timeout < 1)
+			return -EINVAL;
+		if (new_timeout > MAX_TIMEOUT)
+			return -EINVAL;
+		rc32434_wdt_set(new_timeout);
+	case WDIOC_GETTIMEOUT:
+		return copy_to_user(argp, &timeout, sizeof(int));
+	default:
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static struct file_operations rc32434_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.write		= rc32434_wdt_write,
+	.ioctl		= rc32434_wdt_ioctl,
+	.open		= rc32434_wdt_open,
+	.release	= rc32434_wdt_release,
+};
+
+static struct miscdevice rc32434_wdt_miscdev = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rc32434_wdt_fops,
+};
+
+static char banner[] = KERN_INFO KBUILD_MODNAME
+		": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
+
+static int rc32434_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct resource *r;
+
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+	if (!r) {
+		printk(KERN_ERR KBUILD_MODNAME
+			"failed to retrieve resources\n");
+		return -ENODEV;
+	}
+
+	wdt_reg = ioremap_nocache(r->start, r->end - r->start);
+	if (!wdt_reg) {
+		printk(KERN_ERR KBUILD_MODNAME
+			"failed to remap I/O resources\n");
+		return -ENXIO;
+	}
+
+	ret = misc_register(&rc32434_wdt_miscdev);
+
+	if (ret < 0) {
+		printk(KERN_ERR KBUILD_MODNAME
+			"failed to register watchdog device\n");
+		goto unmap;
+	}
+
+	init_completion(&rc32434_wdt_device.stop);
+	rc32434_wdt_device.queue = 0;
+
+	clear_bit(0, &rc32434_wdt_device.inuse);
+
+	setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
+
+	rc32434_wdt_device.default_ticks = ticks;
+
+	rc32434_wdt_start();
+
+	printk(banner, timeout);
+
+	return 0;
+
+unmap:
+	iounmap(wdt_reg);
+	return ret;
+}
+
+static int rc32434_wdt_remove(struct platform_device *pdev)
+{
+	if (rc32434_wdt_device.queue) {
+		rc32434_wdt_device.queue = 0;
+		wait_for_completion(&rc32434_wdt_device.stop);
+	}
+	misc_deregister(&rc32434_wdt_miscdev);
+
+	iounmap(wdt_reg);
+
+	return 0;
+}
+
+static struct platform_driver rc32434_wdt = {
+	.probe	= rc32434_wdt_probe,
+	.remove = rc32434_wdt_remove,
+	.driver = {
+		.name = "rc32434_wdt",
+	}
+};
+
+static int __init rc32434_wdt_init(void)
+{
+	return platform_driver_register(&rc32434_wdt);
+}
+
+static void __exit rc32434_wdt_exit(void)
+{
+	platform_driver_unregister(&rc32434_wdt);
+}
+
+module_init(rc32434_wdt_init);
+module_exit(rc32434_wdt_exit);
+
+MODULE_AUTHOR("Ondrej Zajicek <santiago@crfreenet.org>,"
+		"Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("Driver for the IDT RC32434 SoC watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-- 
GitLab


From ab4ba3cdeb59e85552422680b5bac99e28740330 Mon Sep 17 00:00:00 2001
From: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Date: Tue, 15 Jul 2008 19:40:41 +0000
Subject: [PATCH 449/869] [WATCHDOG] hpwdt.c kdebug support

add kdebug support for the hpwdt.c driver.

Signed-off-by: Thomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/hpwdt.c | 93 +++++++++++++++++++++-------------------
 1 file changed, 50 insertions(+), 43 deletions(-)

diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index d039d5f2fd1..a3765e0be4a 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -116,6 +116,7 @@ static unsigned int reload;			/* the computed soft_margin */
 static int nowayout = WATCHDOG_NOWAYOUT;
 static char expect_release;
 static unsigned long hpwdt_is_open;
+static unsigned int allow_kdump;
 
 static void __iomem *pci_mem_addr;		/* the PCI-memory address */
 static unsigned long __iomem *hpwdt_timer_reg;
@@ -221,19 +222,19 @@ static int __devinit cru_detect(unsigned long map_entry,
 
 	if (cmn_regs.u1.ral != 0) {
 		printk(KERN_WARNING
-		       "hpwdt: Call succeeded but with an error: 0x%x\n",
-		       cmn_regs.u1.ral);
+			"hpwdt: Call succeeded but with an error: 0x%x\n",
+			cmn_regs.u1.ral);
 	} else {
 		physical_bios_base = cmn_regs.u2.rebx;
 		physical_bios_offset = cmn_regs.u4.redx;
 		cru_length = cmn_regs.u3.recx;
 		cru_physical_address =
-		    physical_bios_base + physical_bios_offset;
+			physical_bios_base + physical_bios_offset;
 
 		/* If the values look OK, then map it in. */
 		if ((physical_bios_base + physical_bios_offset)) {
 			cru_rom_addr =
-			    ioremap(cru_physical_address, cru_length);
+				ioremap(cru_physical_address, cru_length);
 			if (cru_rom_addr)
 				retval = 0;
 		}
@@ -356,7 +357,6 @@ asm(".text                      \n\t"
     "call       *%r12           \n\t"
     "pushfq                     \n\t"
     "popq        %r12           \n\t"
-    "popfq                      \n\t"
     "movl       %eax, (%r9)     \n\t"
     "movl       %ebx, 4(%r9)    \n\t"
     "movl       %ecx, 8(%r9)    \n\t"
@@ -390,10 +390,10 @@ static void __devinit dmi_find_cru(const struct dmi_header *dm)
 		smbios_cru64_ptr = (struct smbios_cru64_info *) dm;
 		if (smbios_cru64_ptr->signature == CRU_BIOS_SIGNATURE_VALUE) {
 			cru_physical_address =
-			    smbios_cru64_ptr->physical_address +
-			    smbios_cru64_ptr->double_offset;
+				smbios_cru64_ptr->physical_address +
+				smbios_cru64_ptr->double_offset;
 			cru_rom_addr = ioremap(cru_physical_address,
-				    smbios_cru64_ptr->double_length);
+				smbios_cru64_ptr->double_length);
 		}
 	}
 }
@@ -405,41 +405,13 @@ static int __devinit detect_cru_service(void)
 	dmi_walk(dmi_find_cru);
 
 	/* if cru_rom_addr has been set then we found a CRU service */
-	return ((cru_rom_addr != NULL) ? 0: -ENODEV);
+	return ((cru_rom_addr != NULL) ? 0 : -ENODEV);
 }
 
 /* ------------------------------------------------------------------------- */
 
 #endif
 
-/*
- *	NMI Handler
- */
-static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
-			    void *data)
-{
-	unsigned long rom_pl;
-	static int die_nmi_called;
-
-	if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
-		return NOTIFY_OK;
-
-	spin_lock_irqsave(&rom_lock, rom_pl);
-	if (!die_nmi_called)
-		asminline_call(&cmn_regs, cru_rom_addr);
-	die_nmi_called = 1;
-	spin_unlock_irqrestore(&rom_lock, rom_pl);
-	if (cmn_regs.u1.ral == 0) {
-		printk(KERN_WARNING "hpwdt: An NMI occurred, "
-		       "but unable to determine source.\n");
-	} else {
-		panic("An NMI occurred, please see the Integrated "
-			"Management Log for details.\n");
-	}
-
-	return NOTIFY_STOP;
-}
-
 /*
  *	Watchdog operations
  */
@@ -483,6 +455,36 @@ static int hpwdt_change_timer(int new_margin)
 	return 0;
 }
 
+/*
+ *	NMI Handler
+ */
+static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason,
+				void *data)
+{
+	unsigned long rom_pl;
+	static int die_nmi_called;
+
+	if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
+		return NOTIFY_OK;
+
+	spin_lock_irqsave(&rom_lock, rom_pl);
+	if (!die_nmi_called)
+		asminline_call(&cmn_regs, cru_rom_addr);
+	die_nmi_called = 1;
+	spin_unlock_irqrestore(&rom_lock, rom_pl);
+	if (cmn_regs.u1.ral == 0) {
+		printk(KERN_WARNING "hpwdt: An NMI occurred, "
+			"but unable to determine source.\n");
+	} else {
+		if (allow_kdump)
+			hpwdt_stop();
+		panic("An NMI occurred, please see the Integrated "
+			"Management Log for details.\n");
+	}
+
+	return NOTIFY_STOP;
+}
+
 /*
  *	/dev/watchdog handling
  */
@@ -625,17 +627,18 @@ static struct notifier_block die_notifier = {
  */
 
 static int __devinit hpwdt_init_one(struct pci_dev *dev,
-				    const struct pci_device_id *ent)
+					const struct pci_device_id *ent)
 {
 	int retval;
 
 	/*
 	 * First let's find out if we are on an iLO2 server. We will
 	 * not run on a legacy ASM box.
+	 * So we only support the G5 ProLiant servers and higher.
 	 */
 	if (dev->subsystem_vendor != PCI_VENDOR_ID_HP) {
 		dev_warn(&dev->dev,
-		       "This server does not have an iLO2 ASIC.\n");
+			"This server does not have an iLO2 ASIC.\n");
 		return -ENODEV;
 	}
 
@@ -669,7 +672,7 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 	retval = detect_cru_service();
 	if (retval < 0) {
 		dev_warn(&dev->dev,
-		       "Unable to detect the %d Bit CRU Service.\n",
+			"Unable to detect the %d Bit CRU Service.\n",
 			HPWDT_ARCH);
 		goto error_get_cru;
 	}
@@ -684,7 +687,7 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 	retval = register_die_notifier(&die_notifier);
 	if (retval != 0) {
 		dev_warn(&dev->dev,
-		       "Unable to register a die notifier (err=%d).\n",
+			"Unable to register a die notifier (err=%d).\n",
 			retval);
 		goto error_die_notifier;
 	}
@@ -699,8 +702,9 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev,
 
 	printk(KERN_INFO
 		"hp Watchdog Timer Driver: 1.00"
-		", timer margin: %d seconds( nowayout=%d).\n",
-		soft_margin, nowayout);
+		", timer margin: %d seconds (nowayout=%d)"
+		", allow kernel dump: %s (default = 0/OFF).\n",
+		soft_margin, nowayout, (allow_kdump == 0) ? "OFF" : "ON");
 
 	return 0;
 
@@ -755,6 +759,9 @@ MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
 module_param(soft_margin, int, 0);
 MODULE_PARM_DESC(soft_margin, "Watchdog timeout in seconds");
 
+module_param(allow_kdump, int, 0);
+MODULE_PARM_DESC(allow_kdump, "Start a kernel dump after NMI occurs");
+
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-- 
GitLab


From 593fc178f634b742d03660a35fcb5694c0751718 Mon Sep 17 00:00:00 2001
From: Anton Vorontsov <avorontsov@ru.mvista.com>
Date: Wed, 20 Aug 2008 16:38:36 -0700
Subject: [PATCH 450/869] [WATCHDOG] mpc8xxx_wdt: fix modular build

Fix the following build error when mpc8xxx_wdt is selected to build as a
module:

drivers/watchdog/mpc8xxx_wdt.c:304: error: redefinition of '__inittest'
drivers/watchdog/mpc8xxx_wdt.c:298: error: previous definition of '__inittest' was here
drivers/watchdog/mpc8xxx_wdt.c:304: error: redefinition of 'init_module'
drivers/watchdog/mpc8xxx_wdt.c:298: error: previous definition of 'init_module' was here

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Cc: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
 drivers/watchdog/mpc8xxx_wdt.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index f2094960e66..38c588ee694 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -48,6 +48,7 @@ struct mpc8xxx_wdt_type {
 };
 
 static struct mpc8xxx_wdt __iomem *wd_base;
+static int mpc8xxx_wdt_init_late(void);
 
 static u16 timeout = 0xffff;
 module_param(timeout, ushort, 0);
@@ -213,6 +214,12 @@ static int __devinit mpc8xxx_wdt_probe(struct of_device *ofdev,
 	else
 		timeout_sec = timeout / freq;
 
+#ifdef MODULE
+	ret = mpc8xxx_wdt_init_late();
+	if (ret)
+		goto err_unmap;
+#endif
+
 	pr_info("WDT driver for MPC8xxx initialized. mode:%s timeout=%d "
 		"(%d seconds)\n", reset ? "reset" : "interrupt", timeout,
 		timeout_sec);
@@ -280,7 +287,7 @@ static struct of_platform_driver mpc8xxx_wdt_driver = {
  * very early to start pinging the watchdog (misc devices are not yet
  * available), and later module_init() just registers the misc device.
  */
-static int __init mpc8xxx_wdt_init_late(void)
+static int mpc8xxx_wdt_init_late(void)
 {
 	int ret;
 
@@ -295,7 +302,9 @@ static int __init mpc8xxx_wdt_init_late(void)
 	}
 	return 0;
 }
+#ifndef MODULE
 module_init(mpc8xxx_wdt_init_late);
+#endif
 
 static int __init mpc8xxx_wdt_init(void)
 {
-- 
GitLab


From 95f62bdc550eecfb9c7396b0f7cb5ebd349d0835 Mon Sep 17 00:00:00 2001
From: Ilpo Jarvinen <ilpo.jarvinen@helsinki.fi>
Date: Tue, 19 Aug 2008 09:01:14 +0300
Subject: [PATCH 451/869] [WATCHDOG] at91rm9200_wdt.c: fix misleading
 indentation

Signed-off-by: Ilpo Jarvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/at91rm9200_wdt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c
index d061f0ad2d2..993e5f52afe 100644
--- a/drivers/watchdog/at91rm9200_wdt.c
+++ b/drivers/watchdog/at91rm9200_wdt.c
@@ -241,7 +241,7 @@ static int at91wdt_resume(struct platform_device *pdev)
 {
 	if (at91wdt_busy)
 		at91_wdt_start();
-		return 0;
+	return 0;
 }
 
 #else
-- 
GitLab


From 3ccd3ec6d4a7750c49c4d2bbcc1d0e82cd4c8a7f Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sun, 17 Aug 2008 07:51:12 +0800
Subject: [PATCH 452/869] [WATCHDOG] removed unused #include <version.h>

The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/watchdog/pc87413_wdt.c

This patch removes the said #include <version.h>.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
---
 drivers/watchdog/pc87413_wdt.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index e91ada72da1..484c215e9f3 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -30,7 +30,6 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/moduleparam.h>
-#include <linux/version.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
 
-- 
GitLab


From ec8292347b5052633b46b562598b0e3ee7875ce7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 26 Aug 2008 22:54:02 +0100
Subject: [PATCH 453/869] [ARM] S3C24XX: Fix nor-simtec driver sparse errors

Fix the following sparse errors in arch/arm/mach-s3c2410/nor-simtec.c:

53:27: warning: symbol 'simtec_nor_pdata' was not declared. Should it be static?
77:13: warning: symbol 'nor_simtec_init' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2410/nor-simtec.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
index b2ae237042a..598d130633d 100644
--- a/arch/arm/mach-s3c2410/nor-simtec.c
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -30,6 +30,7 @@
 #include <mach/bast-map.h>
 #include <mach/bast-cpld.h>
 
+#include "nor-simtec.h"
 
 static void simtec_nor_vpp(struct map_info *map, int vpp)
 {
@@ -50,7 +51,7 @@ static void simtec_nor_vpp(struct map_info *map, int vpp)
 	local_irq_restore(flags);
 }
 
-struct physmap_flash_data simtec_nor_pdata = {
+static struct physmap_flash_data simtec_nor_pdata = {
 	.width		= 2,
 	.set_vpp	= simtec_nor_vpp,
 	.nr_parts	= 0,
-- 
GitLab


From f4cb1a89640ee28b66081061e55871f5e0ac685f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 26 Aug 2008 22:54:03 +0100
Subject: [PATCH 454/869] [ARM] S3C24XX: Fix sparse warnings in
 arch/arm/plat-s3c24xx/gpiolib.c

Fix the following problems spotted by sparse:

warning: symbol 's3c24xx_gpiolib_input' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_output' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_set' was not declared. Should it be static?
warning: symbol 's3c24xx_gpiolib_get' was not declared. Should it be static?
warning: symbol 'gpios' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/gpiolib.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 849f8469714..3caec6bad3e 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -39,7 +39,7 @@ static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc)
  * drivers themsevles.
  */
 
-int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	void __iomem *base = ourchip->base;
@@ -58,7 +58,7 @@ int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
-int s3c24xx_gpiolib_output(struct gpio_chip *chip,
+static int s3c24xx_gpiolib_output(struct gpio_chip *chip,
 				  unsigned offset, int value)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
@@ -86,7 +86,8 @@ int s3c24xx_gpiolib_output(struct gpio_chip *chip,
 	return 0;
 }
 
-void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
+static void s3c24xx_gpiolib_set(struct gpio_chip *chip,
+				unsigned offset, int value)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	void __iomem *base = ourchip->base;
@@ -104,7 +105,7 @@ void s3c24xx_gpiolib_set(struct gpio_chip *chip, unsigned offset, int value)
 	local_irq_restore(flags);
 }
 
-int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
+static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip);
 	unsigned long val;
@@ -150,8 +151,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip,
 	return 0;
 }
 
-
-struct s3c24xx_gpio_chip gpios[] = {
+static struct s3c24xx_gpio_chip gpios[] = {
 	[0] = {
 		.base	= S3C24XX_GPIO_BASE(S3C2410_GPA0),
 		.chip	= {
-- 
GitLab


From 1442e662d8e159a3b67280d284c7b91f9fb31ba4 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 26 Aug 2008 22:54:04 +0100
Subject: [PATCH 455/869] [ARM] S3C24XX: Fix spare errors in pwm-clock driver

Fix the following sparse warnings in arch/arm/plat-s3c24xx/pwm-clock.c:

warning: symbol 'clk_timer_scaler' was not declared. Should it be static?
warning: symbol 'clk_timer_tclk' was not declared. Should it be static?
warning: symbol 'clk_timer_tdiv' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/pwm-clock.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index ccfdc9d7ae4..306cc9c6f9e 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -89,7 +89,7 @@ static unsigned long clk_pwm_scaler_getrate(struct clk *clk)
 
 /* TODO - add set rate calls. */
 
-struct clk clk_timer_scaler[] = {
+static struct clk clk_timer_scaler[] = {
 	[0]	= {
 		.name		= "pwm-scaler0",
 		.id		= -1,
@@ -102,7 +102,7 @@ struct clk clk_timer_scaler[] = {
 	},
 };
 
-struct clk clk_timer_tclk[] = {
+static struct clk clk_timer_tclk[] = {
 	[0]	= {
 		.name		= "pwm-tclk0",
 		.id		= -1,
@@ -232,7 +232,7 @@ static int clk_pwm_tdiv_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-struct pwm_tdiv_clk clk_timer_tdiv[] = {
+static struct pwm_tdiv_clk clk_timer_tdiv[] = {
 	[0]	= {
 		.clk	= {
 			.name		= "pwm-tdiv",
-- 
GitLab


From 103895925fbee5bd612ce2217f619df717aa1bda Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 26 Aug 2008 22:54:05 +0100
Subject: [PATCH 456/869] [ARM] S3C24XX: Fix sparse warnings in pwm.c

Fix the following sparse warnings in arch/arm/plat-s3c24xx/pwm.c:

warning: symbol 's3c_device_timer' was not declared. Should it be static?
warning: symbol 'pwm_calc_tin' was not declared. Should it be static?

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/pwm.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 18c4bdc49a0..3b6861936dd 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -19,6 +19,7 @@
 #include <linux/io.h>
 #include <linux/pwm.h>
 
+#include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c/regs-timer.h>
 
 struct pwm_device {
@@ -168,7 +169,7 @@ void pwm_disable(struct pwm_device *pwm)
 
 EXPORT_SYMBOL(pwm_disable);
 
-unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
+static unsigned long pwm_calc_tin(struct pwm_device *pwm, unsigned long freq)
 {
 	unsigned long tin_parent_rate;
 	unsigned int div;
-- 
GitLab


From 66592eee16eaede05734ecc6fef797dafd2c6a12 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 26 Aug 2008 22:54:06 +0100
Subject: [PATCH 457/869] [ARM] S3C24XX: pwm.c: stop debugging output

Move debugging output to dev_dbg() instead of dev_info().

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/plat-s3c24xx/pwm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c
index 3b6861936dd..7a92c938542 100644
--- a/arch/arm/plat-s3c24xx/pwm.c
+++ b/arch/arm/plat-s3c24xx/pwm.c
@@ -39,7 +39,7 @@ struct pwm_device {
 	unsigned char		 pwm_id;
 };
 
-#define pwm_dbg(_pwm, msg...) dev_info(&(_pwm)->pdev->dev, msg)
+#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
 
 static struct clk *clk_scaler[2];
 
-- 
GitLab


From df9f17e20e3180572fe26f60ec4e5ba7db0377a7 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 26 Aug 2008 22:54:07 +0100
Subject: [PATCH 458/869] [ARM] JIVE: Fix the spi bus numbering

The first spi bus is registered with number 0, but
the board data says that the device on it is registered
on bus 1.

Move the spi bus to bus 1 to keep the compatibility with the
original board-support patches.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 arch/arm/mach-s3c2412/mach-jive.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 4c061d29463..ad980a1690c 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -395,7 +395,7 @@ static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
 }
 
 static struct s3c2410_spigpio_info jive_lcd_spi = {
-	.bus_num	= 0,
+	.bus_num	= 1,
 	.pin_clk	= S3C2410_GPG8,
 	.pin_mosi	= S3C2410_GPB8,
 	.chip_select	= jive_lcd_spi_chipselect,
-- 
GitLab


From 78af47353065ea776d537f6e8b32c7c15b6ea169 Mon Sep 17 00:00:00 2001
From: Wei Shuai <cpuwolf@gmail.com>
Date: Tue, 26 Aug 2008 22:54:08 +0100
Subject: [PATCH 459/869] [ARM] S3C2443: Fix the S3C2443 clock register
 definitions

Fix the S3C2443 clock register definitions for selecting the EPLL
reference clock described by S3C2443_CLKSRC_EPLLREF.

Signed-off-by: Wei Shuai <cpuwolf@gmail.com>
[ben-linux@fluff.org: minor description fixes]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
---
 .../arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 7dd458363a5..6026d091a2f 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -48,11 +48,11 @@
 #define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
 #define S3C2443_CLKSRC_I2S_MASK		(3<<14)
 
-#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<8)
-#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<8)
-#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<8)
-#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<8)
+#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<7)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<7)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<7)
+#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<7)
 
 #define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
 #define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
-- 
GitLab


From 3c34a5d821b825b720189e87561ba18500cf8026 Mon Sep 17 00:00:00 2001
From: Dan Williams <dcbw@redhat.com>
Date: Mon, 18 Aug 2008 15:40:02 -0400
Subject: [PATCH 460/869] atmel: return ENOENT on request_firmware failure

Return errors from request_firmware() (like other drivers that do
firmware load on device open) and make up plausible codes for other
error conditions. Gives userspace tools like NetworkManager a clue that
firmware may be missing when the result of setting IFF_UP is ENOENT.

Signed-off-by: Dan Williams <dcbw@redhat.com>

v2: fix reversed check of atmel_wakeup_firmware() in probe_atmel_card()
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/atmel.c | 41 +++++++++++++++++++-----------------
 1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index bd35bb0a148..f23bcd07dee 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -1304,7 +1304,7 @@ EXPORT_SYMBOL(atmel_open);
 int atmel_open(struct net_device *dev)
 {
 	struct atmel_private *priv = netdev_priv(dev);
-	int i, channel;
+	int i, channel, err;
 
 	/* any scheduled timer is no longer needed and might screw things up.. */
 	del_timer_sync(&priv->management_timer);
@@ -1328,8 +1328,9 @@ int atmel_open(struct net_device *dev)
 	priv->site_survey_state = SITE_SURVEY_IDLE;
 	priv->station_is_associated = 0;
 
-	if (!reset_atmel_card(dev))
-		return -EAGAIN;
+	err = reset_atmel_card(dev);
+	if (err)
+		return err;
 
 	if (priv->config_reg_domain) {
 		priv->reg_domain = priv->config_reg_domain;
@@ -3580,12 +3581,12 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
 
 	if (i == 0) {
 		printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 
 	if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) {
 		printk(KERN_ALERT "%s: card missing.\n", priv->dev->name);
-		return 0;
+		return -ENODEV;
 	}
 
 	/* now check for completion of MAC initialization through
@@ -3609,19 +3610,19 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
 	if (i == 0) {
 		printk(KERN_ALERT "%s: MAC failed to initialise.\n",
 				priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 
 	/* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */
 	if ((mr3 & MAC_INIT_COMPLETE) &&
 	    !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) {
 		printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 	if ((mr1 & MAC_INIT_COMPLETE) &&
 	    !(atmel_read16(priv->dev, MR1) & MAC_INIT_OK)) {
 		printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name);
-		return 0;
+		return -EIO;
 	}
 
 	atmel_copy_to_host(priv->dev, (unsigned char *)iface,
@@ -3642,7 +3643,7 @@ static int atmel_wakeup_firmware(struct atmel_private *priv)
 	iface->func_ctrl = le16_to_cpu(iface->func_ctrl);
 	iface->mac_status = le16_to_cpu(iface->mac_status);
 
-	return 1;
+	return 0;
 }
 
 /* determine type of memory and MAC address */
@@ -3693,7 +3694,7 @@ static int probe_atmel_card(struct net_device *dev)
 		/* Standard firmware in flash, boot it up and ask
 		   for the Mac Address */
 		priv->card_type = CARD_TYPE_SPI_FLASH;
-		if (atmel_wakeup_firmware(priv)) {
+		if (atmel_wakeup_firmware(priv) == 0) {
 			atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6);
 
 			/* got address, now squash it again until the network
@@ -3835,6 +3836,7 @@ static int reset_atmel_card(struct net_device *dev)
 	struct atmel_private *priv = netdev_priv(dev);
 	u8 configuration;
 	int old_state = priv->station_state;
+	int err = 0;
 
 	/* data to add to the firmware names, in priority order
 	   this implemenents firmware versioning */
@@ -3868,11 +3870,12 @@ static int reset_atmel_card(struct net_device *dev)
 					       dev->name);
 					strcpy(priv->firmware_id, "atmel_at76c502.bin");
 				}
-				if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) {
+				err = request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev);
+				if (err != 0) {
 					printk(KERN_ALERT
 					       "%s: firmware %s is missing, cannot continue.\n",
 					       dev->name, priv->firmware_id);
-					return 0;
+					return err;
 				}
 			} else {
 				int fw_index = 0;
@@ -3901,7 +3904,7 @@ static int reset_atmel_card(struct net_device *dev)
 					       "%s: firmware %s is missing, cannot start.\n",
 					       dev->name, priv->firmware_id);
 					priv->firmware_id[0] = '\0';
-					return 0;
+					return -ENOENT;
 				}
 			}
 
@@ -3926,8 +3929,9 @@ static int reset_atmel_card(struct net_device *dev)
 			release_firmware(fw_entry);
 	}
 
-	if (!atmel_wakeup_firmware(priv))
-		return 0;
+	err = atmel_wakeup_firmware(priv);
+	if (err != 0)
+		return err;
 
 	/* Check the version and set the correct flag for wpa stuff,
 	   old and new firmware is incompatible.
@@ -3968,10 +3972,9 @@ static int reset_atmel_card(struct net_device *dev)
 	if (!priv->radio_on_broken) {
 		if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
 		    CMD_STATUS_REJECTED_RADIO_OFF) {
-			printk(KERN_INFO
-			       "%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n",
+			printk(KERN_INFO "%s: cannot turn the radio on.\n",
 			       dev->name);
-                        return 0;
+                        return -EIO;
 		}
 	}
 
@@ -4006,7 +4009,7 @@ static int reset_atmel_card(struct net_device *dev)
 		wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
 	}
 
-	return 1;
+	return 0;
 }
 
 static void atmel_send_command(struct atmel_private *priv, int command,
-- 
GitLab


From d0c2912fe8df81a8b723fb6ec4d4cdf523cbaff7 Mon Sep 17 00:00:00 2001
From: Dan Williams <dcbw@redhat.com>
Date: Mon, 18 Aug 2008 15:32:41 -0400
Subject: [PATCH 461/869] atmel: try open system authentication too

When the AP rejects a Shared Key authentication request, try Open System
auth too.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/atmel.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index f23bcd07dee..bd65c485098 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -3062,12 +3062,20 @@ static void authenticate(struct atmel_private *priv, u16 frame_len)
 	}
 
 	if (status == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG) {
-		/* Do opensystem first, then try sharedkey */
+		/* Flip back and forth between WEP auth modes until the max
+		 * authentication tries has been exceeded.
+		 */
 		if (system == WLAN_AUTH_OPEN) {
 			priv->CurrentAuthentTransactionSeqNum = 0x001;
 			priv->exclude_unencrypted = 1;
 			send_authentication_request(priv, WLAN_AUTH_SHARED_KEY, NULL, 0);
 			return;
+		} else if (   system == WLAN_AUTH_SHARED_KEY
+		           && priv->wep_is_on) {
+			priv->CurrentAuthentTransactionSeqNum = 0x001;
+			priv->exclude_unencrypted = 0;
+			send_authentication_request(priv, WLAN_AUTH_OPEN, NULL, 0);
+			return;
 		} else if (priv->connect_to_any_BSS) {
 			int bss_index;
 
-- 
GitLab


From 004829730cb1b03abe7555e1c1faadec62cbcf6f Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 18 Aug 2008 21:45:27 +0200
Subject: [PATCH 462/869] Ath5k: lock beacons

Beacons setup and config was racy with beacon send. Ensure that
ISR and reset functions see consistent state of bbuf.

Use also dev_kfree_skb_any in ath5k_txbuf_free since we call it
from atomic now.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath5k/base.c | 15 ++++++++++++---
 drivers/net/wireless/ath5k/base.h |  1 +
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index b20a45aa868..7bc012fca05 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -251,7 +251,7 @@ static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
 		return;
 	pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
 			PCI_DMA_TODEVICE);
-	dev_kfree_skb(bf->skb);
+	dev_kfree_skb_any(bf->skb);
 	bf->skb = NULL;
 }
 
@@ -466,6 +466,7 @@ ath5k_pci_probe(struct pci_dev *pdev,
 	mutex_init(&sc->lock);
 	spin_lock_init(&sc->rxbuflock);
 	spin_lock_init(&sc->txbuflock);
+	spin_lock_init(&sc->block);
 
 	/* Set private data */
 	pci_set_drvdata(pdev, hw);
@@ -2179,8 +2180,11 @@ ath5k_beacon_config(struct ath5k_softc *sc)
 
 		sc->imask |= AR5K_INT_SWBA;
 
-		if (ath5k_hw_hasveol(ah))
+		if (ath5k_hw_hasveol(ah)) {
+			spin_lock(&sc->block);
 			ath5k_beacon_send(sc);
+			spin_unlock(&sc->block);
+		}
 	}
 	/* TODO else AP */
 
@@ -2403,7 +2407,9 @@ ath5k_intr(int irq, void *dev_id)
 						  TSF_TO_TU(tsf),
 						  (unsigned long long) tsf);
 				} else {
+					spin_lock(&sc->block);
 					ath5k_beacon_send(sc);
+					spin_unlock(&sc->block);
 				}
 			}
 			if (status & AR5K_INT_RXEOL) {
@@ -3050,6 +3056,7 @@ static int
 ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 {
 	struct ath5k_softc *sc = hw->priv;
+	unsigned long flags;
 	int ret;
 
 	ath5k_debug_dump_skb(sc, skb, "BC  ", 1);
@@ -3059,12 +3066,14 @@ ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb)
 		goto end;
 	}
 
+	spin_lock_irqsave(&sc->block, flags);
 	ath5k_txbuf_free(sc, sc->bbuf);
 	sc->bbuf->skb = skb;
 	ret = ath5k_beacon_setup(sc, sc->bbuf);
 	if (ret)
 		sc->bbuf->skb = NULL;
-	else {
+	spin_unlock_irqrestore(&sc->block, flags);
+	if (!ret) {
 		ath5k_beacon_config(sc);
 		mmiowb();
 	}
diff --git a/drivers/net/wireless/ath5k/base.h b/drivers/net/wireless/ath5k/base.h
index d7e03e6b827..7ec2f377d5c 100644
--- a/drivers/net/wireless/ath5k/base.h
+++ b/drivers/net/wireless/ath5k/base.h
@@ -172,6 +172,7 @@ struct ath5k_softc {
 	struct tasklet_struct	txtq;		/* tx intr tasklet */
 	struct ath5k_led	tx_led;		/* tx led */
 
+	spinlock_t		block;		/* protects beacon */
 	struct ath5k_buf	*bbuf;		/* beacon buffer */
 	unsigned int		bhalq,		/* SW q for outgoing beacons */
 				bmisscount,	/* missed beacon transmits */
-- 
GitLab


From 67d2e2dfab31b4c0497ce8a84d63efc931f10bb7 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Mon, 18 Aug 2008 21:45:28 +0200
Subject: [PATCH 463/869] Ath5k: fix bintval setup

bintval is set to the initial value at .config_interface which is too
late, since it overwrites previously set value from .config. Move the
initialization to the .add_interface.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Luis R. Rodriguez <mcgrof@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath5k/base.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 7bc012fca05..0676c6d8438 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -2751,6 +2751,11 @@ static int ath5k_add_interface(struct ieee80211_hw *hw,
 		ret = -EOPNOTSUPP;
 		goto end;
 	}
+
+	/* Set to a reasonable value. Note that this will
+	 * be set to mac80211's value at ath5k_config(). */
+	sc->bintval = 1000;
+
 	ret = 0;
 end:
 	mutex_unlock(&sc->lock);
@@ -2795,9 +2800,6 @@ ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	struct ath5k_hw *ah = sc->ah;
 	int ret;
 
-	/* Set to a reasonable value. Note that this will
-	 * be set to mac80211's value at ath5k_config(). */
-	sc->bintval = 1000;
 	mutex_lock(&sc->lock);
 	if (sc->vif != vif) {
 		ret = -EIO;
-- 
GitLab


From 988b02f1bf5b608ef91a9d98c7170d037d0f12e3 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@nokia.com>
Date: Mon, 18 Aug 2008 22:56:53 +0300
Subject: [PATCH 464/869] net: rfkill: add missing line break

Trivial patch adding a missing line break on
rfkill_claim_show().

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.co>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/rfkill/rfkill.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/rfkill/rfkill.c b/net/rfkill/rfkill.c
index 35a9994e233..74aecc098ba 100644
--- a/net/rfkill/rfkill.c
+++ b/net/rfkill/rfkill.c
@@ -377,7 +377,7 @@ static ssize_t rfkill_claim_show(struct device *dev,
 {
 	struct rfkill *rfkill = to_rfkill(dev);
 
-	return sprintf(buf, "%d", rfkill->user_claim);
+	return sprintf(buf, "%d\n", rfkill->user_claim);
 }
 
 static ssize_t rfkill_claim_store(struct device *dev,
-- 
GitLab


From 087d833e5a9f67ba933cb32eaf5a2279c1a5b47c Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Tue, 19 Aug 2008 10:54:32 +0300
Subject: [PATCH 465/869] mac80211: Use IWEVASSOCREQIE instead of IWEVCUSTOM

The previous code was using IWEVCUSTOM to report IEs from AssocReq and
AssocResp frames into user space. This can easily hit the 256 byte
limit (IW_CUSTOM_MAX) with APs that include number of vendor IEs in
AssocResp. This results in the event message not being sent and dmesg
showing "wlan0 (WE) : Wireless Event too big (366)" type of errors.

Convert mac80211 to use IWEVASSOCREQIE/IWEVASSOCRESPIE to avoid the
issue of being unable to send association IEs as wireless events. These
newer event types use binary encoding and larger maximum size
(IW_GENERIC_IE_MAX = 1024), so the likelyhood of not being able to send
the IEs is much smaller than with IWEVCUSTOM. As an extra benefit, the
code is also quite a bit simpler since there is no need to allocate an
extra buffer for hex encoding.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mlme.c | 48 +++++++++------------------------------------
 1 file changed, 9 insertions(+), 39 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 1e97fb9fb34..09a56e24b79 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -478,51 +478,21 @@ int ieee80211_ht_addt_info_ie_to_ht_bss_info(
 static void ieee80211_sta_send_associnfo(struct net_device *dev,
 					 struct ieee80211_if_sta *ifsta)
 {
-	char *buf;
-	size_t len;
-	int i;
 	union iwreq_data wrqu;
 
-	if (!ifsta->assocreq_ies && !ifsta->assocresp_ies)
-		return;
-
-	buf = kmalloc(50 + 2 * (ifsta->assocreq_ies_len +
-				ifsta->assocresp_ies_len), GFP_KERNEL);
-	if (!buf)
-		return;
-
-	len = sprintf(buf, "ASSOCINFO(");
 	if (ifsta->assocreq_ies) {
-		len += sprintf(buf + len, "ReqIEs=");
-		for (i = 0; i < ifsta->assocreq_ies_len; i++) {
-			len += sprintf(buf + len, "%02x",
-				       ifsta->assocreq_ies[i]);
-		}
-	}
-	if (ifsta->assocresp_ies) {
-		if (ifsta->assocreq_ies)
-			len += sprintf(buf + len, " ");
-		len += sprintf(buf + len, "RespIEs=");
-		for (i = 0; i < ifsta->assocresp_ies_len; i++) {
-			len += sprintf(buf + len, "%02x",
-				       ifsta->assocresp_ies[i]);
-		}
+		memset(&wrqu, 0, sizeof(wrqu));
+		wrqu.data.length = ifsta->assocreq_ies_len;
+		wireless_send_event(dev, IWEVASSOCREQIE, &wrqu,
+				    ifsta->assocreq_ies);
 	}
-	len += sprintf(buf + len, ")");
 
-	if (len > IW_CUSTOM_MAX) {
-		len = sprintf(buf, "ASSOCRESPIE=");
-		for (i = 0; i < ifsta->assocresp_ies_len; i++) {
-			len += sprintf(buf + len, "%02x",
-				       ifsta->assocresp_ies[i]);
-		}
+	if (ifsta->assocresp_ies) {
+		memset(&wrqu, 0, sizeof(wrqu));
+		wrqu.data.length = ifsta->assocresp_ies_len;
+		wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu,
+				    ifsta->assocresp_ies);
 	}
-
-	memset(&wrqu, 0, sizeof(wrqu));
-	wrqu.data.length = len;
-	wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf);
-
-	kfree(buf);
 }
 
 
-- 
GitLab


From 667d8af9af775a5fea203890978037ea750816cc Mon Sep 17 00:00:00 2001
From: Julia Lawall <julia@diku.dk>
Date: Sat, 23 Aug 2008 18:27:38 +0200
Subject: [PATCH 466/869] net/mac80211/mesh.c: correct the argument to
 __mesh_table_free

In the function mesh_table_grow, it is the new table not the argument table
that should be freed if the function fails (cf commit
bd9b448f4c0a514559bdae4ca18ca3e8cd999c6d)

The semantic match that detects this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
expression E,f;
position p1,p2,p3;
identifier l;
statement S;
@@

x = mesh_table_alloc@p1(...)
...
if (x == NULL) S
... when != E = x
    when != mesh_table_free(x)
goto@p2 l;
... when != E = x
    when != f(...,x,...)
    when any
(
return \(0\|x\);
|
return@p3 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
p3 << r.p3;
@@

print "%s: call on line %s not freed or saved before return on line %s via line %s" % (p1[0].file,p1[0].line,p3[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mesh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index b5933b27149..35f2f95f2fa 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -383,7 +383,7 @@ errcopy:
 		hlist_for_each_safe(p, q, &newtbl->hash_buckets[i])
 			tbl->free_node(p, 0);
 	}
-	__mesh_table_free(tbl);
+	__mesh_table_free(newtbl);
 endgrow:
 	return NULL;
 }
-- 
GitLab


From 93015f0f34e81a47c4126329746ce5f364bafd11 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <j@w1.fi>
Date: Mon, 25 Aug 2008 11:57:06 +0300
Subject: [PATCH 467/869] mac80211: Fix debugfs file add/del for netdev

Previous version was using incorrect union structures for non-AP
interfaces when adding and removing max_ratectrl_rateidx and
force_unicast_rateidx entries. Depending on the vif type, this ended
up in corrupting debugfs entries since the dentries inside different
union structures ended up going being on top of eachother.. As the
end result, debugfs files were being left behind with references to
freed data (instant kernel oops on access) and directories were not
removed properly when unloading mac80211 drivers. This patch fixes
those issues by using only a single union structure based on the vif
type.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/debugfs_netdev.c | 24 ++++++++++++------------
 net/mac80211/ieee80211_i.h    |  6 ++++++
 2 files changed, 18 insertions(+), 12 deletions(-)

diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c
index 475f89a8aee..8165df578c9 100644
--- a/net/mac80211/debugfs_netdev.c
+++ b/net/mac80211/debugfs_netdev.c
@@ -248,8 +248,8 @@ IEEE80211_IF_WFILE(min_discovery_timeout,
 static void add_sta_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_ADD(drop_unencrypted, sta);
-	DEBUGFS_ADD(force_unicast_rateidx, ap);
-	DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+	DEBUGFS_ADD(force_unicast_rateidx, sta);
+	DEBUGFS_ADD(max_ratectrl_rateidx, sta);
 
 	DEBUGFS_ADD(state, sta);
 	DEBUGFS_ADD(bssid, sta);
@@ -283,8 +283,8 @@ static void add_ap_files(struct ieee80211_sub_if_data *sdata)
 static void add_wds_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_ADD(drop_unencrypted, wds);
-	DEBUGFS_ADD(force_unicast_rateidx, ap);
-	DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+	DEBUGFS_ADD(force_unicast_rateidx, wds);
+	DEBUGFS_ADD(max_ratectrl_rateidx, wds);
 
 	DEBUGFS_ADD(peer, wds);
 }
@@ -292,8 +292,8 @@ static void add_wds_files(struct ieee80211_sub_if_data *sdata)
 static void add_vlan_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_ADD(drop_unencrypted, vlan);
-	DEBUGFS_ADD(force_unicast_rateidx, ap);
-	DEBUGFS_ADD(max_ratectrl_rateidx, ap);
+	DEBUGFS_ADD(force_unicast_rateidx, vlan);
+	DEBUGFS_ADD(max_ratectrl_rateidx, vlan);
 }
 
 static void add_monitor_files(struct ieee80211_sub_if_data *sdata)
@@ -381,8 +381,8 @@ static void add_files(struct ieee80211_sub_if_data *sdata)
 static void del_sta_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_DEL(drop_unencrypted, sta);
-	DEBUGFS_DEL(force_unicast_rateidx, ap);
-	DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+	DEBUGFS_DEL(force_unicast_rateidx, sta);
+	DEBUGFS_DEL(max_ratectrl_rateidx, sta);
 
 	DEBUGFS_DEL(state, sta);
 	DEBUGFS_DEL(bssid, sta);
@@ -416,8 +416,8 @@ static void del_ap_files(struct ieee80211_sub_if_data *sdata)
 static void del_wds_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_DEL(drop_unencrypted, wds);
-	DEBUGFS_DEL(force_unicast_rateidx, ap);
-	DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+	DEBUGFS_DEL(force_unicast_rateidx, wds);
+	DEBUGFS_DEL(max_ratectrl_rateidx, wds);
 
 	DEBUGFS_DEL(peer, wds);
 }
@@ -425,8 +425,8 @@ static void del_wds_files(struct ieee80211_sub_if_data *sdata)
 static void del_vlan_files(struct ieee80211_sub_if_data *sdata)
 {
 	DEBUGFS_DEL(drop_unencrypted, vlan);
-	DEBUGFS_DEL(force_unicast_rateidx, ap);
-	DEBUGFS_DEL(max_ratectrl_rateidx, ap);
+	DEBUGFS_DEL(force_unicast_rateidx, vlan);
+	DEBUGFS_DEL(max_ratectrl_rateidx, vlan);
 }
 
 static void del_monitor_files(struct ieee80211_sub_if_data *sdata)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index ec59345af65..586a9b49b0f 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -470,6 +470,8 @@ struct ieee80211_sub_if_data {
 			struct dentry *auth_transaction;
 			struct dentry *flags;
 			struct dentry *num_beacons_sta;
+			struct dentry *force_unicast_rateidx;
+			struct dentry *max_ratectrl_rateidx;
 		} sta;
 		struct {
 			struct dentry *drop_unencrypted;
@@ -483,9 +485,13 @@ struct ieee80211_sub_if_data {
 		struct {
 			struct dentry *drop_unencrypted;
 			struct dentry *peer;
+			struct dentry *force_unicast_rateidx;
+			struct dentry *max_ratectrl_rateidx;
 		} wds;
 		struct {
 			struct dentry *drop_unencrypted;
+			struct dentry *force_unicast_rateidx;
+			struct dentry *max_ratectrl_rateidx;
 		} vlan;
 		struct {
 			struct dentry *mode;
-- 
GitLab


From 8ab65b03b7893da4a49009e7e356e36e27b0c407 Mon Sep 17 00:00:00 2001
From: Jan-Espen Pettersen <sigsegv@radiotube.org>
Date: Mon, 25 Aug 2008 20:29:22 +0200
Subject: [PATCH 468/869] mac80211: don't send empty extended rates IE

The association request includes a list of supported data rates.

802.11b: 4 supported rates.
802.11g: 12 (8 + 4) supported rates.
802.11a: 8 supported rates.

The rates tag of the assoc request has room for only 8 rates. In case of
802.11g an extended rate tag is appended. However in net/wireless/mlme.c
an extended (empty) rate tag is also appended if the number of rates is
exact 8. This empty (length=0) extended rates tag causes some APs to
deny association with code 18 (unsupported rates). These APs include my
ZyXEL G-570U, and according to Tomas Winkler som Cisco APs.

'If count == 8' has been used to check for the need for an extended rates
tag. But count would also be equal to 8 if the for loop exited because of
no more supported rates. Therefore a check for count being less than
rates_len would seem more correct.

Thanks to:
 * Dan Williams for newbie guidance
 * Tomas Winkler for confirming the problem

Signed-off-by: Jan-Espen Pettersen <sigsegv@radiotube.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mlme.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 09a56e24b79..74777ade6b2 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -783,7 +783,7 @@ static void ieee80211_send_assoc(struct net_device *dev,
 		}
 	}
 
-	if (count == 8) {
+	if (rates_len > count) {
 		pos = skb_put(skb, rates_len - count + 2);
 		*pos++ = WLAN_EID_EXT_SUPP_RATES;
 		*pos++ = rates_len - count;
-- 
GitLab


From 576fdeaef631976c3afcb1d78ef196051282611d Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Tue, 26 Aug 2008 20:33:34 -0400
Subject: [PATCH 469/869] mac80211: quiet chatty IBSS merge message

It seems obvious that this #ifndef should be the opposite polarity...

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/mlme.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 74777ade6b2..9bb68c6a8f4 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -2838,7 +2838,7 @@ static void ieee80211_rx_bss_info(struct net_device *dev,
 		       jiffies);
 #endif /* CONFIG_MAC80211_IBSS_DEBUG */
 		if (beacon_timestamp > rx_timestamp) {
-#ifndef CONFIG_MAC80211_IBSS_DEBUG
+#ifdef CONFIG_MAC80211_IBSS_DEBUG
 			printk(KERN_DEBUG "%s: beacon TSF higher than "
 			       "local TSF - IBSS merge with BSSID %s\n",
 			       dev->name, print_mac(mac, mgmt->bssid));
-- 
GitLab


From 639f6571458948b5112be2cf00c0c2c04db2897d Mon Sep 17 00:00:00 2001
From: Bryan Wu <cooloney@kernel.org>
Date: Wed, 27 Aug 2008 10:51:02 +0800
Subject: [PATCH 470/869] Blackfin arch: move include/asm-blackfin header files
 to arch/blackfin

Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/Makefile                        | 26 ++++---------------
 .../blackfin/include/asm}/.gitignore          |  0
 .../blackfin/include/asm}/Kbuild              |  0
 .../blackfin/include/asm}/a.out.h             |  0
 .../blackfin/include/asm}/atomic.h            |  0
 .../blackfin/include/asm}/auxvec.h            |  0
 .../blackfin/include/asm}/bfin-global.h       |  0
 .../blackfin/include/asm}/bfin5xx_spi.h       |  0
 .../blackfin/include/asm}/bfin_simple_timer.h |  0
 .../blackfin/include/asm}/bfin_sport.h        |  0
 .../blackfin/include/asm}/bitops.h            |  0
 .../blackfin/include/asm}/blackfin.h          |  4 +--
 .../blackfin/include/asm}/bug.h               |  0
 .../blackfin/include/asm}/bugs.h              |  0
 .../blackfin/include/asm}/byteorder.h         |  0
 .../blackfin/include/asm}/cache.h             |  0
 .../blackfin/include/asm}/cacheflush.h        |  0
 .../blackfin/include/asm}/cdef_LPBlackfin.h   |  2 +-
 .../blackfin/include/asm}/checksum.h          |  0
 .../blackfin/include/asm}/clocks.h            |  0
 .../blackfin/include/asm}/context.S           |  0
 .../blackfin/include/asm}/cplb-mpu.h          |  0
 .../blackfin/include/asm}/cplb.h              |  2 +-
 .../blackfin/include/asm}/cplbinit.h          |  0
 .../blackfin/include/asm}/cpumask.h           |  0
 .../blackfin/include/asm}/cputime.h           |  0
 .../blackfin/include/asm}/current.h           |  0
 .../blackfin/include/asm}/def_LPBlackfin.h    |  2 +-
 .../blackfin/include/asm}/delay.h             |  2 +-
 .../blackfin/include/asm}/device.h            |  0
 .../blackfin/include/asm}/div64.h             |  0
 .../blackfin/include/asm}/dma-mapping.h       |  0
 .../blackfin/include/asm}/dma.h               |  2 +-
 .../blackfin/include/asm}/dpmc.h              |  0
 .../blackfin/include/asm}/early_printk.h      |  0
 .../blackfin/include/asm}/elf.h               |  0
 .../blackfin/include/asm}/emergency-restart.h |  0
 .../blackfin/include/asm}/entry.h             |  0
 .../blackfin/include/asm}/errno.h             |  0
 .../blackfin/include/asm}/fb.h                |  0
 .../blackfin/include/asm}/fcntl.h             |  0
 .../blackfin/include/asm}/fixed_code.h        |  0
 .../blackfin/include/asm}/flat.h              |  0
 .../blackfin/include/asm}/futex.h             |  0
 .../blackfin/include/asm}/gpio.h              |  2 +-
 .../blackfin/include/asm}/gptimers.h          |  0
 .../blackfin/include/asm}/hardirq.h           |  0
 .../blackfin/include/asm}/hw_irq.h            |  0
 .../blackfin/include/asm}/io.h                |  0
 .../blackfin/include/asm}/ioctl.h             |  0
 .../blackfin/include/asm}/ioctls.h            |  0
 .../blackfin/include/asm}/ipcbuf.h            |  0
 .../blackfin/include/asm}/irq.h               |  4 +--
 .../blackfin/include/asm}/irq_handler.h       |  0
 .../blackfin/include/asm}/irq_regs.h          |  0
 .../blackfin/include/asm}/kdebug.h            |  0
 .../blackfin/include/asm}/kgdb.h              |  0
 .../blackfin/include/asm}/kmap_types.h        |  0
 .../blackfin/include/asm}/l1layout.h          |  0
 .../blackfin/include/asm}/linkage.h           |  0
 .../blackfin/include/asm}/local.h             |  0
 .../blackfin/include/asm}/mem_map.h           |  2 +-
 .../blackfin/include/asm}/mman.h              |  0
 .../blackfin/include/asm}/mmu.h               |  0
 .../blackfin/include/asm}/mmu_context.h       |  0
 .../blackfin/include/asm}/module.h            |  0
 .../blackfin/include/asm}/msgbuf.h            |  0
 .../blackfin/include/asm}/mutex.h             |  0
 .../blackfin/include/asm}/nand.h              |  0
 .../blackfin/include/asm}/page.h              |  0
 .../blackfin/include/asm}/page_offset.h       |  0
 .../blackfin/include/asm}/param.h             |  0
 .../blackfin/include/asm}/pci.h               |  0
 .../blackfin/include/asm}/percpu.h            |  0
 .../blackfin/include/asm}/pgalloc.h           |  0
 .../blackfin/include/asm}/pgtable.h           |  2 +-
 .../blackfin/include/asm}/poll.h              |  0
 .../blackfin/include/asm}/portmux.h           |  2 +-
 .../blackfin/include/asm}/posix_types.h       |  0
 .../blackfin/include/asm}/processor.h         |  0
 .../blackfin/include/asm}/ptrace.h            |  0
 .../blackfin/include/asm}/reboot.h            |  0
 .../blackfin/include/asm}/resource.h          |  0
 .../blackfin/include/asm}/scatterlist.h       |  0
 .../blackfin/include/asm}/sections.h          |  0
 .../blackfin/include/asm}/segment.h           |  0
 .../blackfin/include/asm}/sembuf.h            |  0
 .../blackfin/include/asm}/serial.h            |  0
 .../blackfin/include/asm}/setup.h             |  0
 .../blackfin/include/asm}/shmbuf.h            |  0
 .../blackfin/include/asm}/shmparam.h          |  0
 .../blackfin/include/asm}/sigcontext.h        |  0
 .../blackfin/include/asm}/siginfo.h           |  0
 .../blackfin/include/asm}/signal.h            |  0
 .../blackfin/include/asm}/socket.h            |  0
 .../blackfin/include/asm}/sockios.h           |  0
 .../blackfin/include/asm}/spinlock.h          |  0
 .../blackfin/include/asm}/stat.h              |  0
 .../blackfin/include/asm}/statfs.h            |  0
 .../blackfin/include/asm}/string.h            |  0
 .../blackfin/include/asm}/system.h            |  2 +-
 .../blackfin/include/asm}/termbits.h          |  0
 .../blackfin/include/asm}/termios.h           |  0
 .../blackfin/include/asm}/thread_info.h       |  0
 .../blackfin/include/asm}/time.h              |  0
 .../blackfin/include/asm}/timex.h             |  0
 .../blackfin/include/asm}/tlb.h               |  0
 .../blackfin/include/asm}/tlbflush.h          |  0
 .../blackfin/include/asm}/topology.h          |  0
 .../blackfin/include/asm}/trace.h             |  0
 .../blackfin/include/asm}/traps.h             |  0
 .../blackfin/include/asm}/types.h             |  0
 .../blackfin/include/asm}/uaccess.h           |  0
 .../blackfin/include/asm}/ucontext.h          |  0
 .../blackfin/include/asm}/unaligned.h         |  0
 .../blackfin/include/asm}/unistd.h            |  0
 .../blackfin/include/asm}/user.h              |  0
 arch/blackfin/kernel/entry.S                  |  2 +-
 arch/blackfin/mach-bf527/head.S               |  4 +--
 .../mach-bf527/include/mach}/anomaly.h        |  0
 .../blackfin/mach-bf527/include/mach}/bf527.h |  0
 .../include/mach}/bfin_serial_5xx.h           |  0
 .../mach-bf527/include/mach}/bfin_sir.h       |  0
 .../mach-bf527/include/mach}/blackfin.h       |  0
 .../mach-bf527/include/mach}/cdefBF522.h      |  2 +-
 .../mach-bf527/include/mach}/cdefBF525.h      |  2 +-
 .../mach-bf527/include/mach}/cdefBF527.h      |  2 +-
 .../mach-bf527/include/mach}/cdefBF52x_base.h |  2 +-
 .../mach-bf527/include/mach}/defBF522.h       |  2 +-
 .../mach-bf527/include/mach}/defBF525.h       |  2 +-
 .../mach-bf527/include/mach}/defBF527.h       |  2 +-
 .../mach-bf527/include/mach}/defBF52x_base.h  |  0
 .../blackfin/mach-bf527/include/mach}/dma.h   |  0
 .../blackfin/mach-bf527/include/mach}/irq.h   |  0
 .../mach-bf527/include/mach}/mem_init.h       |  0
 .../mach-bf527/include/mach}/mem_map.h        |  0
 .../mach-bf527/include/mach}/portmux.h        |  0
 arch/blackfin/mach-bf533/head.S               |  4 +--
 .../mach-bf533/include/mach}/anomaly.h        |  0
 .../blackfin/mach-bf533/include/mach}/bf533.h |  0
 .../include/mach}/bfin_serial_5xx.h           |  0
 .../mach-bf533/include/mach}/bfin_sir.h       |  0
 .../mach-bf533/include/mach}/blackfin.h       |  0
 .../mach-bf533/include/mach}/cdefBF532.h      |  2 +-
 .../mach-bf533/include/mach}/defBF532.h       |  2 +-
 .../blackfin/mach-bf533/include/mach}/dma.h   |  0
 .../blackfin/mach-bf533/include/mach}/irq.h   |  0
 .../mach-bf533/include/mach}/mem_init.h       |  0
 .../mach-bf533/include/mach}/mem_map.h        |  0
 .../mach-bf533/include/mach}/portmux.h        |  0
 arch/blackfin/mach-bf537/head.S               |  4 +--
 .../mach-bf537/include/mach}/anomaly.h        |  0
 .../blackfin/mach-bf537/include/mach}/bf537.h |  0
 .../include/mach}/bfin_serial_5xx.h           |  0
 .../mach-bf537/include/mach}/bfin_sir.h       |  0
 .../mach-bf537/include/mach}/blackfin.h       |  0
 .../mach-bf537/include/mach}/cdefBF534.h      |  2 +-
 .../mach-bf537/include/mach}/cdefBF537.h      |  0
 .../mach-bf537/include/mach}/defBF534.h       |  2 +-
 .../mach-bf537/include/mach}/defBF537.h       |  2 +-
 .../blackfin/mach-bf537/include/mach}/dma.h   |  0
 .../blackfin/mach-bf537/include/mach}/irq.h   |  0
 .../mach-bf537/include/mach}/mem_init.h       |  0
 .../mach-bf537/include/mach}/mem_map.h        |  0
 .../mach-bf537/include/mach}/portmux.h        |  0
 arch/blackfin/mach-bf548/boards/cm_bf548.c    |  4 +--
 arch/blackfin/mach-bf548/boards/ezkit.c       |  4 +--
 arch/blackfin/mach-bf548/head.S               |  4 +--
 .../mach-bf548/include/mach}/anomaly.h        |  0
 .../blackfin/mach-bf548/include/mach}/bf548.h |  0
 .../mach-bf548/include/mach}/bf54x-lq043.h    |  0
 .../mach-bf548/include/mach}/bf54x_keys.h     |  0
 .../include/mach}/bfin_serial_5xx.h           |  0
 .../mach-bf548/include/mach}/bfin_sir.h       |  0
 .../mach-bf548/include/mach}/blackfin.h       |  0
 .../mach-bf548/include/mach}/cdefBF542.h      |  2 +-
 .../mach-bf548/include/mach}/cdefBF544.h      |  2 +-
 .../mach-bf548/include/mach}/cdefBF547.h      |  2 +-
 .../mach-bf548/include/mach}/cdefBF548.h      |  2 +-
 .../mach-bf548/include/mach}/cdefBF549.h      |  2 +-
 .../mach-bf548/include/mach}/cdefBF54x_base.h |  0
 .../mach-bf548/include/mach}/defBF542.h       |  2 +-
 .../mach-bf548/include/mach}/defBF544.h       |  2 +-
 .../mach-bf548/include/mach}/defBF547.h       |  2 +-
 .../mach-bf548/include/mach}/defBF548.h       |  2 +-
 .../mach-bf548/include/mach}/defBF549.h       |  2 +-
 .../mach-bf548/include/mach}/defBF54x_base.h  |  0
 .../blackfin/mach-bf548/include/mach}/dma.h   |  0
 .../blackfin/mach-bf548/include/mach}/gpio.h  |  0
 .../blackfin/mach-bf548/include/mach}/irq.h   |  0
 .../mach-bf548/include/mach}/mem_init.h       |  0
 .../mach-bf548/include/mach}/mem_map.h        |  0
 .../mach-bf548/include/mach}/portmux.h        |  0
 arch/blackfin/mach-bf561/head.S               |  4 +--
 .../mach-bf561/include/mach}/anomaly.h        |  0
 .../blackfin/mach-bf561/include/mach}/bf561.h |  0
 .../include/mach}/bfin_serial_5xx.h           |  0
 .../mach-bf561/include/mach}/bfin_sir.h       |  0
 .../mach-bf561/include/mach}/blackfin.h       |  0
 .../mach-bf561/include/mach}/cdefBF561.h      |  2 +-
 .../mach-bf561/include/mach}/defBF561.h       |  2 +-
 .../blackfin/mach-bf561/include/mach}/dma.h   |  0
 .../blackfin/mach-bf561/include/mach}/irq.h   |  0
 .../mach-bf561/include/mach}/mem_init.h       |  0
 .../mach-bf561/include/mach}/mem_map.h        |  0
 .../mach-bf561/include/mach}/portmux.h        |  0
 arch/blackfin/mach-common/arch_checks.c       |  4 +--
 arch/blackfin/mach-common/dpmc_modes.S        |  2 +-
 arch/blackfin/mach-common/entry.S             |  2 +-
 arch/blackfin/mach-common/interrupt.S         |  4 +--
 drivers/input/keyboard/bf54x-keys.c           |  2 +-
 drivers/serial/bfin_5xx.c                     |  2 +-
 drivers/video/bf54x-lq043fb.c                 |  2 +-
 213 files changed, 67 insertions(+), 83 deletions(-)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/.gitignore (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/Kbuild (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/a.out.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/atomic.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/auxvec.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/bfin-global.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/bfin5xx_spi.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/bfin_simple_timer.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/bfin_sport.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/bitops.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/blackfin.h (96%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/bug.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/bugs.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/byteorder.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/cache.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/cacheflush.h (100%)
 rename {include/asm-blackfin/mach-common => arch/blackfin/include/asm}/cdef_LPBlackfin.h (99%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/checksum.h (100%)
 rename {include/asm-blackfin/mach-common => arch/blackfin/include/asm}/clocks.h (100%)
 rename {include/asm-blackfin/mach-common => arch/blackfin/include/asm}/context.S (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/cplb-mpu.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/cplb.h (99%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/cplbinit.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/cpumask.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/cputime.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/current.h (100%)
 rename {include/asm-blackfin/mach-common => arch/blackfin/include/asm}/def_LPBlackfin.h (99%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/delay.h (97%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/device.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/div64.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/dma-mapping.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/dma.h (99%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/dpmc.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/early_printk.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/elf.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/emergency-restart.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/entry.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/errno.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/fb.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/fcntl.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/fixed_code.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/flat.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/futex.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/gpio.h (99%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/gptimers.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/hardirq.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/hw_irq.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/io.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/ioctl.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/ioctls.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/ipcbuf.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/irq.h (96%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/irq_handler.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/irq_regs.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/kdebug.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/kgdb.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/kmap_types.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/l1layout.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/linkage.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/local.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/mem_map.h (83%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/mman.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/mmu.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/mmu_context.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/module.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/msgbuf.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/mutex.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/nand.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/page.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/page_offset.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/param.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/pci.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/percpu.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/pgalloc.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/pgtable.h (98%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/poll.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/portmux.h (99%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/posix_types.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/processor.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/ptrace.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/reboot.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/resource.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/scatterlist.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/sections.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/segment.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/sembuf.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/serial.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/setup.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/shmbuf.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/shmparam.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/sigcontext.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/siginfo.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/signal.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/socket.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/sockios.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/spinlock.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/stat.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/statfs.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/string.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/system.h (99%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/termbits.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/termios.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/thread_info.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/time.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/timex.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/tlb.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/tlbflush.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/topology.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/trace.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/traps.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/types.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/uaccess.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/ucontext.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/unaligned.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/unistd.h (100%)
 rename {include/asm-blackfin => arch/blackfin/include/asm}/user.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/anomaly.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/bf527.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/bfin_serial_5xx.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/bfin_sir.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/blackfin.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/cdefBF522.h (96%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/cdefBF525.h (99%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/cdefBF527.h (99%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/cdefBF52x_base.h (99%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/defBF522.h (96%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/defBF525.h (99%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/defBF527.h (99%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/defBF52x_base.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/dma.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/irq.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/mem_init.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/mem_map.h (100%)
 rename {include/asm-blackfin/mach-bf527 => arch/blackfin/mach-bf527/include/mach}/portmux.h (100%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/anomaly.h (100%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/bf533.h (100%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/bfin_serial_5xx.h (100%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/bfin_sir.h (100%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/blackfin.h (100%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/cdefBF532.h (99%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/defBF532.h (99%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/dma.h (100%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/irq.h (100%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/mem_init.h (100%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/mem_map.h (100%)
 rename {include/asm-blackfin/mach-bf533 => arch/blackfin/mach-bf533/include/mach}/portmux.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/anomaly.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/bf537.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/bfin_serial_5xx.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/bfin_sir.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/blackfin.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/cdefBF534.h (99%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/cdefBF537.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/defBF534.h (99%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/defBF537.h (99%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/dma.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/irq.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/mem_init.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/mem_map.h (100%)
 rename {include/asm-blackfin/mach-bf537 => arch/blackfin/mach-bf537/include/mach}/portmux.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/anomaly.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/bf548.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/bf54x-lq043.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/bf54x_keys.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/bfin_serial_5xx.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/bfin_sir.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/blackfin.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF542.h (99%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF544.h (99%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF547.h (99%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF548.h (99%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF549.h (99%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/cdefBF54x_base.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF542.h (99%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF544.h (99%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF547.h (99%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF548.h (99%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF549.h (99%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/defBF54x_base.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/dma.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/gpio.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/irq.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/mem_init.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/mem_map.h (100%)
 rename {include/asm-blackfin/mach-bf548 => arch/blackfin/mach-bf548/include/mach}/portmux.h (100%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/anomaly.h (100%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/bf561.h (100%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/bfin_serial_5xx.h (100%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/bfin_sir.h (100%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/blackfin.h (100%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/cdefBF561.h (99%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/defBF561.h (99%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/dma.h (100%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/irq.h (100%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/mem_init.h (100%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/mem_map.h (100%)
 rename {include/asm-blackfin/mach-bf561 => arch/blackfin/mach-bf561/include/mach}/portmux.h (100%)

diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 9564731ad3a..eac0533d6e4 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -98,36 +98,20 @@ libs-y   += arch/$(ARCH)/lib/
 
 drivers-$(CONFIG_OPROFILE) += arch/$(ARCH)/oprofile/
 
+machdirs	:= $(patsubst %,arch/blackfin/mach-%/, $(machine-y))
 
+KBUILD_CFLAGS += -Iarch/$(ARCH)/include/
+KBUILD_CFLAGS += -Iarch/$(ARCH)/mach-$(MACHINE)/include
 
-#	Update machine arch symlinks if something which affects
-#	them changed.  We use .mach to indicate when they were updated
-#	last, otherwise make uses the target directory mtime.
-
-       show_mach_symlink = :
- quiet_show_mach_symlink = echo '  SYMLINK include/asm-$(ARCH)/mach-$(MACHINE) -> include/asm-$(ARCH)/mach'
-silent_show_mach_symlink = :
-include/asm-blackfin/.mach: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@$($(quiet)show_mach_symlink)
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-$(ARCH)
-	$(Q)ln -fsn $(srctree)/include/asm-$(ARCH)/mach-$(MACHINE) include/asm-$(ARCH)/mach
-else
-	$(Q)ln -fsn mach-$(MACHINE) include/asm-$(ARCH)/mach
-endif
-	@touch $@
+KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
 
 CLEAN_FILES += \
-	include/asm-$(ARCH)/asm-offsets.h \
+	arch/$(ARCH)/include/asm/asm-offsets.h \
 	arch/$(ARCH)/kernel/asm-offsets.s \
-	include/asm-$(ARCH)/mach \
-	include/asm-$(ARCH)/.mach
 
-archprepare: include/asm-blackfin/.mach
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-
 INSTALL_PATH ?= /tftpboot
 boot := arch/$(ARCH)/boot
 BOOT_TARGETS = vmImage
diff --git a/include/asm-blackfin/.gitignore b/arch/blackfin/include/asm/.gitignore
similarity index 100%
rename from include/asm-blackfin/.gitignore
rename to arch/blackfin/include/asm/.gitignore
diff --git a/include/asm-blackfin/Kbuild b/arch/blackfin/include/asm/Kbuild
similarity index 100%
rename from include/asm-blackfin/Kbuild
rename to arch/blackfin/include/asm/Kbuild
diff --git a/include/asm-blackfin/a.out.h b/arch/blackfin/include/asm/a.out.h
similarity index 100%
rename from include/asm-blackfin/a.out.h
rename to arch/blackfin/include/asm/a.out.h
diff --git a/include/asm-blackfin/atomic.h b/arch/blackfin/include/asm/atomic.h
similarity index 100%
rename from include/asm-blackfin/atomic.h
rename to arch/blackfin/include/asm/atomic.h
diff --git a/include/asm-blackfin/auxvec.h b/arch/blackfin/include/asm/auxvec.h
similarity index 100%
rename from include/asm-blackfin/auxvec.h
rename to arch/blackfin/include/asm/auxvec.h
diff --git a/include/asm-blackfin/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h
similarity index 100%
rename from include/asm-blackfin/bfin-global.h
rename to arch/blackfin/include/asm/bfin-global.h
diff --git a/include/asm-blackfin/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h
similarity index 100%
rename from include/asm-blackfin/bfin5xx_spi.h
rename to arch/blackfin/include/asm/bfin5xx_spi.h
diff --git a/include/asm-blackfin/bfin_simple_timer.h b/arch/blackfin/include/asm/bfin_simple_timer.h
similarity index 100%
rename from include/asm-blackfin/bfin_simple_timer.h
rename to arch/blackfin/include/asm/bfin_simple_timer.h
diff --git a/include/asm-blackfin/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
similarity index 100%
rename from include/asm-blackfin/bfin_sport.h
rename to arch/blackfin/include/asm/bfin_sport.h
diff --git a/include/asm-blackfin/bitops.h b/arch/blackfin/include/asm/bitops.h
similarity index 100%
rename from include/asm-blackfin/bitops.h
rename to arch/blackfin/include/asm/bitops.h
diff --git a/include/asm-blackfin/blackfin.h b/arch/blackfin/include/asm/blackfin.h
similarity index 96%
rename from include/asm-blackfin/blackfin.h
rename to arch/blackfin/include/asm/blackfin.h
index 984b74f0a2e..8749b0e321a 100644
--- a/include/asm-blackfin/blackfin.h
+++ b/arch/blackfin/include/asm/blackfin.h
@@ -11,7 +11,7 @@
 #define HI(con32) (((con32) >> 16) & 0xFFFF)
 #define hi(con32) (((con32) >> 16) & 0xFFFF)
 
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 #ifndef __ASSEMBLY__
 
@@ -86,7 +86,7 @@ static inline void CSYNC(void)
 
 #endif /* __ASSEMBLY__ */
 
-#include <asm/mach/blackfin.h>
+#include <mach/blackfin.h>
 #include <asm/bfin-global.h>
 
 #endif				/* _BLACKFIN_H_ */
diff --git a/include/asm-blackfin/bug.h b/arch/blackfin/include/asm/bug.h
similarity index 100%
rename from include/asm-blackfin/bug.h
rename to arch/blackfin/include/asm/bug.h
diff --git a/include/asm-blackfin/bugs.h b/arch/blackfin/include/asm/bugs.h
similarity index 100%
rename from include/asm-blackfin/bugs.h
rename to arch/blackfin/include/asm/bugs.h
diff --git a/include/asm-blackfin/byteorder.h b/arch/blackfin/include/asm/byteorder.h
similarity index 100%
rename from include/asm-blackfin/byteorder.h
rename to arch/blackfin/include/asm/byteorder.h
diff --git a/include/asm-blackfin/cache.h b/arch/blackfin/include/asm/cache.h
similarity index 100%
rename from include/asm-blackfin/cache.h
rename to arch/blackfin/include/asm/cache.h
diff --git a/include/asm-blackfin/cacheflush.h b/arch/blackfin/include/asm/cacheflush.h
similarity index 100%
rename from include/asm-blackfin/cacheflush.h
rename to arch/blackfin/include/asm/cacheflush.h
diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/arch/blackfin/include/asm/cdef_LPBlackfin.h
similarity index 99%
rename from include/asm-blackfin/mach-common/cdef_LPBlackfin.h
rename to arch/blackfin/include/asm/cdef_LPBlackfin.h
index d39c396f850..35f841bce57 100644
--- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h
+++ b/arch/blackfin/include/asm/cdef_LPBlackfin.h
@@ -33,7 +33,7 @@
 #warning cdef_LPBlackfin.h should only be included for 532 compatible chips.
 #endif
 */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /*Cache & SRAM Memory*/
 #define bfin_read_SRAM_BASE_ADDRESS()        bfin_read32(SRAM_BASE_ADDRESS)
diff --git a/include/asm-blackfin/checksum.h b/arch/blackfin/include/asm/checksum.h
similarity index 100%
rename from include/asm-blackfin/checksum.h
rename to arch/blackfin/include/asm/checksum.h
diff --git a/include/asm-blackfin/mach-common/clocks.h b/arch/blackfin/include/asm/clocks.h
similarity index 100%
rename from include/asm-blackfin/mach-common/clocks.h
rename to arch/blackfin/include/asm/clocks.h
diff --git a/include/asm-blackfin/mach-common/context.S b/arch/blackfin/include/asm/context.S
similarity index 100%
rename from include/asm-blackfin/mach-common/context.S
rename to arch/blackfin/include/asm/context.S
diff --git a/include/asm-blackfin/cplb-mpu.h b/arch/blackfin/include/asm/cplb-mpu.h
similarity index 100%
rename from include/asm-blackfin/cplb-mpu.h
rename to arch/blackfin/include/asm/cplb-mpu.h
diff --git a/include/asm-blackfin/cplb.h b/arch/blackfin/include/asm/cplb.h
similarity index 99%
rename from include/asm-blackfin/cplb.h
rename to arch/blackfin/include/asm/cplb.h
index 5b0da9a69b6..05d6f05fb74 100644
--- a/include/asm-blackfin/cplb.h
+++ b/arch/blackfin/include/asm/cplb.h
@@ -31,7 +31,7 @@
 #define _CPLB_H
 
 #include <asm/blackfin.h>
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 #define SDRAM_IGENERIC    (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
 #define SDRAM_IKERNEL     (SDRAM_IGENERIC | CPLB_LOCK)
diff --git a/include/asm-blackfin/cplbinit.h b/arch/blackfin/include/asm/cplbinit.h
similarity index 100%
rename from include/asm-blackfin/cplbinit.h
rename to arch/blackfin/include/asm/cplbinit.h
diff --git a/include/asm-blackfin/cpumask.h b/arch/blackfin/include/asm/cpumask.h
similarity index 100%
rename from include/asm-blackfin/cpumask.h
rename to arch/blackfin/include/asm/cpumask.h
diff --git a/include/asm-blackfin/cputime.h b/arch/blackfin/include/asm/cputime.h
similarity index 100%
rename from include/asm-blackfin/cputime.h
rename to arch/blackfin/include/asm/cputime.h
diff --git a/include/asm-blackfin/current.h b/arch/blackfin/include/asm/current.h
similarity index 100%
rename from include/asm-blackfin/current.h
rename to arch/blackfin/include/asm/current.h
diff --git a/include/asm-blackfin/mach-common/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
similarity index 99%
rename from include/asm-blackfin/mach-common/def_LPBlackfin.h
rename to arch/blackfin/include/asm/def_LPBlackfin.h
index e8967f6124f..6341eebff3d 100644
--- a/include/asm-blackfin/mach-common/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -31,7 +31,7 @@
 #ifndef _DEF_LPBLACKFIN_H
 #define _DEF_LPBLACKFIN_H
 
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 #define MK_BMSK_(x) (1<<x)
 
diff --git a/include/asm-blackfin/delay.h b/arch/blackfin/include/asm/delay.h
similarity index 97%
rename from include/asm-blackfin/delay.h
rename to arch/blackfin/include/asm/delay.h
index 473a8113277..0889c3abb59 100644
--- a/include/asm-blackfin/delay.h
+++ b/arch/blackfin/include/asm/delay.h
@@ -9,7 +9,7 @@
 #ifndef __ASM_DELAY_H__
 #define __ASM_DELAY_H__
 
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 static inline void __delay(unsigned long loops)
 {
diff --git a/include/asm-blackfin/device.h b/arch/blackfin/include/asm/device.h
similarity index 100%
rename from include/asm-blackfin/device.h
rename to arch/blackfin/include/asm/device.h
diff --git a/include/asm-blackfin/div64.h b/arch/blackfin/include/asm/div64.h
similarity index 100%
rename from include/asm-blackfin/div64.h
rename to arch/blackfin/include/asm/div64.h
diff --git a/include/asm-blackfin/dma-mapping.h b/arch/blackfin/include/asm/dma-mapping.h
similarity index 100%
rename from include/asm-blackfin/dma-mapping.h
rename to arch/blackfin/include/asm/dma-mapping.h
diff --git a/include/asm-blackfin/dma.h b/arch/blackfin/include/asm/dma.h
similarity index 99%
rename from include/asm-blackfin/dma.h
rename to arch/blackfin/include/asm/dma.h
index 3cd4b522aa3..6509733bb0f 100644
--- a/include/asm-blackfin/dma.h
+++ b/arch/blackfin/include/asm/dma.h
@@ -35,7 +35,7 @@
 #include <asm/signal.h>
 
 #include <linux/kernel.h>
-#include <asm/mach/dma.h>
+#include <mach/dma.h>
 #include <linux/mm.h>
 #include <linux/interrupt.h>
 #include <asm/blackfin.h>
diff --git a/include/asm-blackfin/dpmc.h b/arch/blackfin/include/asm/dpmc.h
similarity index 100%
rename from include/asm-blackfin/dpmc.h
rename to arch/blackfin/include/asm/dpmc.h
diff --git a/include/asm-blackfin/early_printk.h b/arch/blackfin/include/asm/early_printk.h
similarity index 100%
rename from include/asm-blackfin/early_printk.h
rename to arch/blackfin/include/asm/early_printk.h
diff --git a/include/asm-blackfin/elf.h b/arch/blackfin/include/asm/elf.h
similarity index 100%
rename from include/asm-blackfin/elf.h
rename to arch/blackfin/include/asm/elf.h
diff --git a/include/asm-blackfin/emergency-restart.h b/arch/blackfin/include/asm/emergency-restart.h
similarity index 100%
rename from include/asm-blackfin/emergency-restart.h
rename to arch/blackfin/include/asm/emergency-restart.h
diff --git a/include/asm-blackfin/entry.h b/arch/blackfin/include/asm/entry.h
similarity index 100%
rename from include/asm-blackfin/entry.h
rename to arch/blackfin/include/asm/entry.h
diff --git a/include/asm-blackfin/errno.h b/arch/blackfin/include/asm/errno.h
similarity index 100%
rename from include/asm-blackfin/errno.h
rename to arch/blackfin/include/asm/errno.h
diff --git a/include/asm-blackfin/fb.h b/arch/blackfin/include/asm/fb.h
similarity index 100%
rename from include/asm-blackfin/fb.h
rename to arch/blackfin/include/asm/fb.h
diff --git a/include/asm-blackfin/fcntl.h b/arch/blackfin/include/asm/fcntl.h
similarity index 100%
rename from include/asm-blackfin/fcntl.h
rename to arch/blackfin/include/asm/fcntl.h
diff --git a/include/asm-blackfin/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h
similarity index 100%
rename from include/asm-blackfin/fixed_code.h
rename to arch/blackfin/include/asm/fixed_code.h
diff --git a/include/asm-blackfin/flat.h b/arch/blackfin/include/asm/flat.h
similarity index 100%
rename from include/asm-blackfin/flat.h
rename to arch/blackfin/include/asm/flat.h
diff --git a/include/asm-blackfin/futex.h b/arch/blackfin/include/asm/futex.h
similarity index 100%
rename from include/asm-blackfin/futex.h
rename to arch/blackfin/include/asm/futex.h
diff --git a/include/asm-blackfin/gpio.h b/arch/blackfin/include/asm/gpio.h
similarity index 99%
rename from include/asm-blackfin/gpio.h
rename to arch/blackfin/include/asm/gpio.h
index 168f1251eb4..ad33ac271fd 100644
--- a/include/asm-blackfin/gpio.h
+++ b/arch/blackfin/include/asm/gpio.h
@@ -224,7 +224,7 @@
 #endif
 
 #ifdef BF548_FAMILY
-#include <asm-blackfin/mach-bf548/gpio.h>
+#include <mach/gpio.h>
 #endif
 
 #ifdef BF561_FAMILY
diff --git a/include/asm-blackfin/gptimers.h b/arch/blackfin/include/asm/gptimers.h
similarity index 100%
rename from include/asm-blackfin/gptimers.h
rename to arch/blackfin/include/asm/gptimers.h
diff --git a/include/asm-blackfin/hardirq.h b/arch/blackfin/include/asm/hardirq.h
similarity index 100%
rename from include/asm-blackfin/hardirq.h
rename to arch/blackfin/include/asm/hardirq.h
diff --git a/include/asm-blackfin/hw_irq.h b/arch/blackfin/include/asm/hw_irq.h
similarity index 100%
rename from include/asm-blackfin/hw_irq.h
rename to arch/blackfin/include/asm/hw_irq.h
diff --git a/include/asm-blackfin/io.h b/arch/blackfin/include/asm/io.h
similarity index 100%
rename from include/asm-blackfin/io.h
rename to arch/blackfin/include/asm/io.h
diff --git a/include/asm-blackfin/ioctl.h b/arch/blackfin/include/asm/ioctl.h
similarity index 100%
rename from include/asm-blackfin/ioctl.h
rename to arch/blackfin/include/asm/ioctl.h
diff --git a/include/asm-blackfin/ioctls.h b/arch/blackfin/include/asm/ioctls.h
similarity index 100%
rename from include/asm-blackfin/ioctls.h
rename to arch/blackfin/include/asm/ioctls.h
diff --git a/include/asm-blackfin/ipcbuf.h b/arch/blackfin/include/asm/ipcbuf.h
similarity index 100%
rename from include/asm-blackfin/ipcbuf.h
rename to arch/blackfin/include/asm/ipcbuf.h
diff --git a/include/asm-blackfin/irq.h b/arch/blackfin/include/asm/irq.h
similarity index 96%
rename from include/asm-blackfin/irq.h
rename to arch/blackfin/include/asm/irq.h
index 86b67834354..89f59e18af9 100644
--- a/include/asm-blackfin/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -17,7 +17,7 @@
 #ifndef _BFIN_IRQ_H_
 #define _BFIN_IRQ_H_
 
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
 #include <asm/ptrace.h>
 
 /*******************************************************************************
@@ -34,7 +34,7 @@
  *   interrupts apart (just the TX/RX for the various devices)
  *******************************************************************************/
 
-/* SYS_IRQS and NR_IRQS are defined in <asm/mach-bf5xx/irq.h>*/
+/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h>*/
 
 /*
  * Machine specific interrupt sources.
diff --git a/include/asm-blackfin/irq_handler.h b/arch/blackfin/include/asm/irq_handler.h
similarity index 100%
rename from include/asm-blackfin/irq_handler.h
rename to arch/blackfin/include/asm/irq_handler.h
diff --git a/include/asm-blackfin/irq_regs.h b/arch/blackfin/include/asm/irq_regs.h
similarity index 100%
rename from include/asm-blackfin/irq_regs.h
rename to arch/blackfin/include/asm/irq_regs.h
diff --git a/include/asm-blackfin/kdebug.h b/arch/blackfin/include/asm/kdebug.h
similarity index 100%
rename from include/asm-blackfin/kdebug.h
rename to arch/blackfin/include/asm/kdebug.h
diff --git a/include/asm-blackfin/kgdb.h b/arch/blackfin/include/asm/kgdb.h
similarity index 100%
rename from include/asm-blackfin/kgdb.h
rename to arch/blackfin/include/asm/kgdb.h
diff --git a/include/asm-blackfin/kmap_types.h b/arch/blackfin/include/asm/kmap_types.h
similarity index 100%
rename from include/asm-blackfin/kmap_types.h
rename to arch/blackfin/include/asm/kmap_types.h
diff --git a/include/asm-blackfin/l1layout.h b/arch/blackfin/include/asm/l1layout.h
similarity index 100%
rename from include/asm-blackfin/l1layout.h
rename to arch/blackfin/include/asm/l1layout.h
diff --git a/include/asm-blackfin/linkage.h b/arch/blackfin/include/asm/linkage.h
similarity index 100%
rename from include/asm-blackfin/linkage.h
rename to arch/blackfin/include/asm/linkage.h
diff --git a/include/asm-blackfin/local.h b/arch/blackfin/include/asm/local.h
similarity index 100%
rename from include/asm-blackfin/local.h
rename to arch/blackfin/include/asm/local.h
diff --git a/include/asm-blackfin/mem_map.h b/arch/blackfin/include/asm/mem_map.h
similarity index 83%
rename from include/asm-blackfin/mem_map.h
rename to arch/blackfin/include/asm/mem_map.h
index 42d1f37f6d9..88d04a70770 100644
--- a/include/asm-blackfin/mem_map.h
+++ b/arch/blackfin/include/asm/mem_map.h
@@ -7,6 +7,6 @@
 #ifndef _MEM_MAP_H_
 #define _MEM_MAP_H_
 
-#include <asm/mach/mem_map.h>
+#include <mach/mem_map.h>
 
 #endif				/* _MEM_MAP_H_ */
diff --git a/include/asm-blackfin/mman.h b/arch/blackfin/include/asm/mman.h
similarity index 100%
rename from include/asm-blackfin/mman.h
rename to arch/blackfin/include/asm/mman.h
diff --git a/include/asm-blackfin/mmu.h b/arch/blackfin/include/asm/mmu.h
similarity index 100%
rename from include/asm-blackfin/mmu.h
rename to arch/blackfin/include/asm/mmu.h
diff --git a/include/asm-blackfin/mmu_context.h b/arch/blackfin/include/asm/mmu_context.h
similarity index 100%
rename from include/asm-blackfin/mmu_context.h
rename to arch/blackfin/include/asm/mmu_context.h
diff --git a/include/asm-blackfin/module.h b/arch/blackfin/include/asm/module.h
similarity index 100%
rename from include/asm-blackfin/module.h
rename to arch/blackfin/include/asm/module.h
diff --git a/include/asm-blackfin/msgbuf.h b/arch/blackfin/include/asm/msgbuf.h
similarity index 100%
rename from include/asm-blackfin/msgbuf.h
rename to arch/blackfin/include/asm/msgbuf.h
diff --git a/include/asm-blackfin/mutex.h b/arch/blackfin/include/asm/mutex.h
similarity index 100%
rename from include/asm-blackfin/mutex.h
rename to arch/blackfin/include/asm/mutex.h
diff --git a/include/asm-blackfin/nand.h b/arch/blackfin/include/asm/nand.h
similarity index 100%
rename from include/asm-blackfin/nand.h
rename to arch/blackfin/include/asm/nand.h
diff --git a/include/asm-blackfin/page.h b/arch/blackfin/include/asm/page.h
similarity index 100%
rename from include/asm-blackfin/page.h
rename to arch/blackfin/include/asm/page.h
diff --git a/include/asm-blackfin/page_offset.h b/arch/blackfin/include/asm/page_offset.h
similarity index 100%
rename from include/asm-blackfin/page_offset.h
rename to arch/blackfin/include/asm/page_offset.h
diff --git a/include/asm-blackfin/param.h b/arch/blackfin/include/asm/param.h
similarity index 100%
rename from include/asm-blackfin/param.h
rename to arch/blackfin/include/asm/param.h
diff --git a/include/asm-blackfin/pci.h b/arch/blackfin/include/asm/pci.h
similarity index 100%
rename from include/asm-blackfin/pci.h
rename to arch/blackfin/include/asm/pci.h
diff --git a/include/asm-blackfin/percpu.h b/arch/blackfin/include/asm/percpu.h
similarity index 100%
rename from include/asm-blackfin/percpu.h
rename to arch/blackfin/include/asm/percpu.h
diff --git a/include/asm-blackfin/pgalloc.h b/arch/blackfin/include/asm/pgalloc.h
similarity index 100%
rename from include/asm-blackfin/pgalloc.h
rename to arch/blackfin/include/asm/pgalloc.h
diff --git a/include/asm-blackfin/pgtable.h b/arch/blackfin/include/asm/pgtable.h
similarity index 98%
rename from include/asm-blackfin/pgtable.h
rename to arch/blackfin/include/asm/pgtable.h
index b11b114689c..f11684e4ade 100644
--- a/include/asm-blackfin/pgtable.h
+++ b/arch/blackfin/include/asm/pgtable.h
@@ -4,7 +4,7 @@
 #include <asm-generic/4level-fixup.h>
 
 #include <asm/page.h>
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 typedef pte_t *pte_addr_t;
 /*
diff --git a/include/asm-blackfin/poll.h b/arch/blackfin/include/asm/poll.h
similarity index 100%
rename from include/asm-blackfin/poll.h
rename to arch/blackfin/include/asm/poll.h
diff --git a/include/asm-blackfin/portmux.h b/arch/blackfin/include/asm/portmux.h
similarity index 99%
rename from include/asm-blackfin/portmux.h
rename to arch/blackfin/include/asm/portmux.h
index 0807b286cd9..88eb5c07cc2 100644
--- a/include/asm-blackfin/portmux.h
+++ b/arch/blackfin/include/asm/portmux.h
@@ -21,7 +21,7 @@ int peripheral_request_list(const unsigned short per[], const char *label);
 void peripheral_free_list(const unsigned short per[]);
 
 #include <asm/gpio.h>
-#include <asm/mach/portmux.h>
+#include <mach/portmux.h>
 
 #ifndef P_SPORT2_TFS
 #define P_SPORT2_TFS P_UNDEF
diff --git a/include/asm-blackfin/posix_types.h b/arch/blackfin/include/asm/posix_types.h
similarity index 100%
rename from include/asm-blackfin/posix_types.h
rename to arch/blackfin/include/asm/posix_types.h
diff --git a/include/asm-blackfin/processor.h b/arch/blackfin/include/asm/processor.h
similarity index 100%
rename from include/asm-blackfin/processor.h
rename to arch/blackfin/include/asm/processor.h
diff --git a/include/asm-blackfin/ptrace.h b/arch/blackfin/include/asm/ptrace.h
similarity index 100%
rename from include/asm-blackfin/ptrace.h
rename to arch/blackfin/include/asm/ptrace.h
diff --git a/include/asm-blackfin/reboot.h b/arch/blackfin/include/asm/reboot.h
similarity index 100%
rename from include/asm-blackfin/reboot.h
rename to arch/blackfin/include/asm/reboot.h
diff --git a/include/asm-blackfin/resource.h b/arch/blackfin/include/asm/resource.h
similarity index 100%
rename from include/asm-blackfin/resource.h
rename to arch/blackfin/include/asm/resource.h
diff --git a/include/asm-blackfin/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h
similarity index 100%
rename from include/asm-blackfin/scatterlist.h
rename to arch/blackfin/include/asm/scatterlist.h
diff --git a/include/asm-blackfin/sections.h b/arch/blackfin/include/asm/sections.h
similarity index 100%
rename from include/asm-blackfin/sections.h
rename to arch/blackfin/include/asm/sections.h
diff --git a/include/asm-blackfin/segment.h b/arch/blackfin/include/asm/segment.h
similarity index 100%
rename from include/asm-blackfin/segment.h
rename to arch/blackfin/include/asm/segment.h
diff --git a/include/asm-blackfin/sembuf.h b/arch/blackfin/include/asm/sembuf.h
similarity index 100%
rename from include/asm-blackfin/sembuf.h
rename to arch/blackfin/include/asm/sembuf.h
diff --git a/include/asm-blackfin/serial.h b/arch/blackfin/include/asm/serial.h
similarity index 100%
rename from include/asm-blackfin/serial.h
rename to arch/blackfin/include/asm/serial.h
diff --git a/include/asm-blackfin/setup.h b/arch/blackfin/include/asm/setup.h
similarity index 100%
rename from include/asm-blackfin/setup.h
rename to arch/blackfin/include/asm/setup.h
diff --git a/include/asm-blackfin/shmbuf.h b/arch/blackfin/include/asm/shmbuf.h
similarity index 100%
rename from include/asm-blackfin/shmbuf.h
rename to arch/blackfin/include/asm/shmbuf.h
diff --git a/include/asm-blackfin/shmparam.h b/arch/blackfin/include/asm/shmparam.h
similarity index 100%
rename from include/asm-blackfin/shmparam.h
rename to arch/blackfin/include/asm/shmparam.h
diff --git a/include/asm-blackfin/sigcontext.h b/arch/blackfin/include/asm/sigcontext.h
similarity index 100%
rename from include/asm-blackfin/sigcontext.h
rename to arch/blackfin/include/asm/sigcontext.h
diff --git a/include/asm-blackfin/siginfo.h b/arch/blackfin/include/asm/siginfo.h
similarity index 100%
rename from include/asm-blackfin/siginfo.h
rename to arch/blackfin/include/asm/siginfo.h
diff --git a/include/asm-blackfin/signal.h b/arch/blackfin/include/asm/signal.h
similarity index 100%
rename from include/asm-blackfin/signal.h
rename to arch/blackfin/include/asm/signal.h
diff --git a/include/asm-blackfin/socket.h b/arch/blackfin/include/asm/socket.h
similarity index 100%
rename from include/asm-blackfin/socket.h
rename to arch/blackfin/include/asm/socket.h
diff --git a/include/asm-blackfin/sockios.h b/arch/blackfin/include/asm/sockios.h
similarity index 100%
rename from include/asm-blackfin/sockios.h
rename to arch/blackfin/include/asm/sockios.h
diff --git a/include/asm-blackfin/spinlock.h b/arch/blackfin/include/asm/spinlock.h
similarity index 100%
rename from include/asm-blackfin/spinlock.h
rename to arch/blackfin/include/asm/spinlock.h
diff --git a/include/asm-blackfin/stat.h b/arch/blackfin/include/asm/stat.h
similarity index 100%
rename from include/asm-blackfin/stat.h
rename to arch/blackfin/include/asm/stat.h
diff --git a/include/asm-blackfin/statfs.h b/arch/blackfin/include/asm/statfs.h
similarity index 100%
rename from include/asm-blackfin/statfs.h
rename to arch/blackfin/include/asm/statfs.h
diff --git a/include/asm-blackfin/string.h b/arch/blackfin/include/asm/string.h
similarity index 100%
rename from include/asm-blackfin/string.h
rename to arch/blackfin/include/asm/string.h
diff --git a/include/asm-blackfin/system.h b/arch/blackfin/include/asm/system.h
similarity index 99%
rename from include/asm-blackfin/system.h
rename to arch/blackfin/include/asm/system.h
index 51494ef5bb4..8f1627d8bf0 100644
--- a/include/asm-blackfin/system.h
+++ b/arch/blackfin/include/asm/system.h
@@ -36,7 +36,7 @@
 
 #include <linux/linkage.h>
 #include <linux/compiler.h>
-#include <asm/mach/anomaly.h>
+#include <mach/anomaly.h>
 
 /*
  * Interrupt configuring macros.
diff --git a/include/asm-blackfin/termbits.h b/arch/blackfin/include/asm/termbits.h
similarity index 100%
rename from include/asm-blackfin/termbits.h
rename to arch/blackfin/include/asm/termbits.h
diff --git a/include/asm-blackfin/termios.h b/arch/blackfin/include/asm/termios.h
similarity index 100%
rename from include/asm-blackfin/termios.h
rename to arch/blackfin/include/asm/termios.h
diff --git a/include/asm-blackfin/thread_info.h b/arch/blackfin/include/asm/thread_info.h
similarity index 100%
rename from include/asm-blackfin/thread_info.h
rename to arch/blackfin/include/asm/thread_info.h
diff --git a/include/asm-blackfin/time.h b/arch/blackfin/include/asm/time.h
similarity index 100%
rename from include/asm-blackfin/time.h
rename to arch/blackfin/include/asm/time.h
diff --git a/include/asm-blackfin/timex.h b/arch/blackfin/include/asm/timex.h
similarity index 100%
rename from include/asm-blackfin/timex.h
rename to arch/blackfin/include/asm/timex.h
diff --git a/include/asm-blackfin/tlb.h b/arch/blackfin/include/asm/tlb.h
similarity index 100%
rename from include/asm-blackfin/tlb.h
rename to arch/blackfin/include/asm/tlb.h
diff --git a/include/asm-blackfin/tlbflush.h b/arch/blackfin/include/asm/tlbflush.h
similarity index 100%
rename from include/asm-blackfin/tlbflush.h
rename to arch/blackfin/include/asm/tlbflush.h
diff --git a/include/asm-blackfin/topology.h b/arch/blackfin/include/asm/topology.h
similarity index 100%
rename from include/asm-blackfin/topology.h
rename to arch/blackfin/include/asm/topology.h
diff --git a/include/asm-blackfin/trace.h b/arch/blackfin/include/asm/trace.h
similarity index 100%
rename from include/asm-blackfin/trace.h
rename to arch/blackfin/include/asm/trace.h
diff --git a/include/asm-blackfin/traps.h b/arch/blackfin/include/asm/traps.h
similarity index 100%
rename from include/asm-blackfin/traps.h
rename to arch/blackfin/include/asm/traps.h
diff --git a/include/asm-blackfin/types.h b/arch/blackfin/include/asm/types.h
similarity index 100%
rename from include/asm-blackfin/types.h
rename to arch/blackfin/include/asm/types.h
diff --git a/include/asm-blackfin/uaccess.h b/arch/blackfin/include/asm/uaccess.h
similarity index 100%
rename from include/asm-blackfin/uaccess.h
rename to arch/blackfin/include/asm/uaccess.h
diff --git a/include/asm-blackfin/ucontext.h b/arch/blackfin/include/asm/ucontext.h
similarity index 100%
rename from include/asm-blackfin/ucontext.h
rename to arch/blackfin/include/asm/ucontext.h
diff --git a/include/asm-blackfin/unaligned.h b/arch/blackfin/include/asm/unaligned.h
similarity index 100%
rename from include/asm-blackfin/unaligned.h
rename to arch/blackfin/include/asm/unaligned.h
diff --git a/include/asm-blackfin/unistd.h b/arch/blackfin/include/asm/unistd.h
similarity index 100%
rename from include/asm-blackfin/unistd.h
rename to arch/blackfin/include/asm/unistd.h
diff --git a/include/asm-blackfin/user.h b/arch/blackfin/include/asm/user.h
similarity index 100%
rename from include/asm-blackfin/user.h
rename to arch/blackfin/include/asm/user.h
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 31bd9bf3efa..faea88ebb2e 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -32,7 +32,7 @@
 #include <asm/errno.h>
 #include <asm/asm-offsets.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 #ifdef CONFIG_EXCPT_IRQ_SYSC_L1
 .section .l1.text
diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S
index c3334cc5bcb..28c48619120 100644
--- a/arch/blackfin/mach-bf527/head.S
+++ b/arch/blackfin/mach-bf527/head.S
@@ -31,8 +31,8 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
 .section .l1.text
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/anomaly.h
rename to arch/blackfin/mach-bf527/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf527/bf527.h b/arch/blackfin/mach-bf527/include/mach/bf527.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/bf527.h
rename to arch/blackfin/mach-bf527/include/mach/bf527.h
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
rename to arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
diff --git a/include/asm-blackfin/mach-bf527/bfin_sir.h b/arch/blackfin/mach-bf527/include/mach/bfin_sir.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/bfin_sir.h
rename to arch/blackfin/mach-bf527/include/mach/bfin_sir.h
diff --git a/include/asm-blackfin/mach-bf527/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/blackfin.h
rename to arch/blackfin/mach-bf527/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf527/cdefBF522.h b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
similarity index 96%
rename from include/asm-blackfin/mach-bf527/cdefBF522.h
rename to arch/blackfin/mach-bf527/include/mach/cdefBF522.h
index 52c06494b88..663c2bbdfd9 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF522.h
@@ -36,7 +36,7 @@
 #include "defBF522.h"
 
 /* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */
 
diff --git a/include/asm-blackfin/mach-bf527/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
similarity index 99%
rename from include/asm-blackfin/mach-bf527/cdefBF525.h
rename to arch/blackfin/mach-bf527/include/mach/cdefBF525.h
index 2cc67e4b4d8..00377eb59b7 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
@@ -36,7 +36,7 @@
 #include "defBF525.h"
 
 /* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
 
diff --git a/include/asm-blackfin/mach-bf527/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
similarity index 99%
rename from include/asm-blackfin/mach-bf527/cdefBF527.h
rename to arch/blackfin/mach-bf527/include/mach/cdefBF527.h
index 5bd1a860174..fca8db70811 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
@@ -36,7 +36,7 @@
 #include "defBF527.h"
 
 /* include core specific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
 
diff --git a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
similarity index 99%
rename from include/asm-blackfin/mach-bf527/cdefBF52x_base.h
rename to arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 9dbdbec8ea1..9a814b9a12b 100644
--- a/include/asm-blackfin/mach-bf527/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -37,7 +37,7 @@
 #include "defBF52x_base.h"
 
 /* Include core specific register pointer definitions 								*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* ==== begin from cdefBF534.h ==== */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF522.h b/arch/blackfin/mach-bf527/include/mach/defBF522.h
similarity index 96%
rename from include/asm-blackfin/mach-bf527/defBF522.h
rename to arch/blackfin/mach-bf527/include/mach/defBF522.h
index 9671d8f2c5e..0a8cdcdf0b4 100644
--- a/include/asm-blackfin/mach-bf527/defBF522.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF522.h
@@ -32,7 +32,7 @@
 #define _DEF_BF522_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF522 */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
similarity index 99%
rename from include/asm-blackfin/mach-bf527/defBF525.h
rename to arch/blackfin/mach-bf527/include/mach/defBF525.h
index 6a375a084ac..5cd7576fef7 100644
--- a/include/asm-blackfin/mach-bf527/defBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -32,7 +32,7 @@
 #define _DEF_BF525_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
similarity index 99%
rename from include/asm-blackfin/mach-bf527/defBF527.h
rename to arch/blackfin/mach-bf527/include/mach/defBF527.h
index f1a70db70cb..f040f364afa 100644
--- a/include/asm-blackfin/mach-bf527/defBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -32,7 +32,7 @@
 #define _DEF_BF527_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
 
diff --git a/include/asm-blackfin/mach-bf527/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/defBF52x_base.h
rename to arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
diff --git a/include/asm-blackfin/mach-bf527/dma.h b/arch/blackfin/mach-bf527/include/mach/dma.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/dma.h
rename to arch/blackfin/mach-bf527/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf527/irq.h b/arch/blackfin/mach-bf527/include/mach/irq.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/irq.h
rename to arch/blackfin/mach-bf527/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf527/mem_init.h b/arch/blackfin/mach-bf527/include/mach/mem_init.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/mem_init.h
rename to arch/blackfin/mach-bf527/include/mach/mem_init.h
diff --git a/include/asm-blackfin/mach-bf527/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/mem_map.h
rename to arch/blackfin/mach-bf527/include/mach/mem_map.h
diff --git a/include/asm-blackfin/mach-bf527/portmux.h b/arch/blackfin/mach-bf527/include/mach/portmux.h
similarity index 100%
rename from include/asm-blackfin/mach-bf527/portmux.h
rename to arch/blackfin/mach-bf527/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index d59db86195b..01b2b7ead5a 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -31,8 +31,8 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
 .section .l1.text
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
similarity index 100%
rename from include/asm-blackfin/mach-bf533/anomaly.h
rename to arch/blackfin/mach-bf533/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf533/bf533.h b/arch/blackfin/mach-bf533/include/mach/bf533.h
similarity index 100%
rename from include/asm-blackfin/mach-bf533/bf533.h
rename to arch/blackfin/mach-bf533/include/mach/bf533.h
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
similarity index 100%
rename from include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
rename to arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
diff --git a/include/asm-blackfin/mach-bf533/bfin_sir.h b/arch/blackfin/mach-bf533/include/mach/bfin_sir.h
similarity index 100%
rename from include/asm-blackfin/mach-bf533/bfin_sir.h
rename to arch/blackfin/mach-bf533/include/mach/bfin_sir.h
diff --git a/include/asm-blackfin/mach-bf533/blackfin.h b/arch/blackfin/mach-bf533/include/mach/blackfin.h
similarity index 100%
rename from include/asm-blackfin/mach-bf533/blackfin.h
rename to arch/blackfin/mach-bf533/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf533/cdefBF532.h b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
similarity index 99%
rename from include/asm-blackfin/mach-bf533/cdefBF532.h
rename to arch/blackfin/mach-bf533/include/mach/cdefBF532.h
index 154655452d4..3d8978a52c1 100644
--- a/include/asm-blackfin/mach-bf533/cdefBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/cdefBF532.h
@@ -37,7 +37,7 @@
 #include "defBF532.h"
 
 /*include core specific register pointer definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 #include <asm/system.h>
 
diff --git a/include/asm-blackfin/mach-bf533/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
similarity index 99%
rename from include/asm-blackfin/mach-bf533/defBF532.h
rename to arch/blackfin/mach-bf533/include/mach/defBF532.h
index 0ab4dd7494c..7f4633223e6 100644
--- a/include/asm-blackfin/mach-bf533/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -48,7 +48,7 @@
 #define _DEF_BF532_H
 
 /* include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /*********************************************************************************** */
 /* System MMR Register Map */
diff --git a/include/asm-blackfin/mach-bf533/dma.h b/arch/blackfin/mach-bf533/include/mach/dma.h
similarity index 100%
rename from include/asm-blackfin/mach-bf533/dma.h
rename to arch/blackfin/mach-bf533/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf533/irq.h b/arch/blackfin/mach-bf533/include/mach/irq.h
similarity index 100%
rename from include/asm-blackfin/mach-bf533/irq.h
rename to arch/blackfin/mach-bf533/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/arch/blackfin/mach-bf533/include/mach/mem_init.h
similarity index 100%
rename from include/asm-blackfin/mach-bf533/mem_init.h
rename to arch/blackfin/mach-bf533/include/mach/mem_init.h
diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/arch/blackfin/mach-bf533/include/mach/mem_map.h
similarity index 100%
rename from include/asm-blackfin/mach-bf533/mem_map.h
rename to arch/blackfin/mach-bf533/include/mach/mem_map.h
diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/arch/blackfin/mach-bf533/include/mach/portmux.h
similarity index 100%
rename from include/asm-blackfin/mach-bf533/portmux.h
rename to arch/blackfin/mach-bf533/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 64e0287ab26..12eb5cc571d 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -31,8 +31,8 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
 .section .l1.text
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/anomaly.h
rename to arch/blackfin/mach-bf537/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf537/bf537.h b/arch/blackfin/mach-bf537/include/mach/bf537.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/bf537.h
rename to arch/blackfin/mach-bf537/include/mach/bf537.h
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
rename to arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
diff --git a/include/asm-blackfin/mach-bf537/bfin_sir.h b/arch/blackfin/mach-bf537/include/mach/bfin_sir.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/bfin_sir.h
rename to arch/blackfin/mach-bf537/include/mach/bfin_sir.h
diff --git a/include/asm-blackfin/mach-bf537/blackfin.h b/arch/blackfin/mach-bf537/include/mach/blackfin.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/blackfin.h
rename to arch/blackfin/mach-bf537/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf537/cdefBF534.h b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
similarity index 99%
rename from include/asm-blackfin/mach-bf537/cdefBF534.h
rename to arch/blackfin/mach-bf537/include/mach/cdefBF534.h
index 82de526f809..88d491cd9f3 100644
--- a/include/asm-blackfin/mach-bf537/cdefBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/cdefBF534.h
@@ -38,7 +38,7 @@
 #include "defBF534.h"
 
 /* Include core specific register pointer definitions 								*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 #include <asm/system.h>
 
diff --git a/include/asm-blackfin/mach-bf537/cdefBF537.h b/arch/blackfin/mach-bf537/include/mach/cdefBF537.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/cdefBF537.h
rename to arch/blackfin/mach-bf537/include/mach/cdefBF537.h
diff --git a/include/asm-blackfin/mach-bf537/defBF534.h b/arch/blackfin/mach-bf537/include/mach/defBF534.h
similarity index 99%
rename from include/asm-blackfin/mach-bf537/defBF534.h
rename to arch/blackfin/mach-bf537/include/mach/defBF534.h
index d0d80d3152b..a3227f9003f 100644
--- a/include/asm-blackfin/mach-bf537/defBF534.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF534.h
@@ -32,7 +32,7 @@
 #define _DEF_BF534_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /************************************************************************************
 ** System MMR Register Map
diff --git a/include/asm-blackfin/mach-bf537/defBF537.h b/arch/blackfin/mach-bf537/include/mach/defBF537.h
similarity index 99%
rename from include/asm-blackfin/mach-bf537/defBF537.h
rename to arch/blackfin/mach-bf537/include/mach/defBF537.h
index abde24c6d3b..3d6c83e31b1 100644
--- a/include/asm-blackfin/mach-bf537/defBF537.h
+++ b/arch/blackfin/mach-bf537/include/mach/defBF537.h
@@ -33,7 +33,7 @@
 #define _DEF_BF537_H
 
 /* Include all Core registers and bit definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* Include all MMR and bit defines common to BF534 */
 #include "defBF534.h"
diff --git a/include/asm-blackfin/mach-bf537/dma.h b/arch/blackfin/mach-bf537/include/mach/dma.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/dma.h
rename to arch/blackfin/mach-bf537/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf537/irq.h b/arch/blackfin/mach-bf537/include/mach/irq.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/irq.h
rename to arch/blackfin/mach-bf537/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf537/mem_init.h b/arch/blackfin/mach-bf537/include/mach/mem_init.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/mem_init.h
rename to arch/blackfin/mach-bf537/include/mach/mem_init.h
diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/arch/blackfin/mach-bf537/include/mach/mem_map.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/mem_map.h
rename to arch/blackfin/mach-bf537/include/mach/mem_map.h
diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/arch/blackfin/mach-bf537/include/mach/portmux.h
similarity index 100%
rename from include/asm-blackfin/mach-bf537/portmux.h
rename to arch/blackfin/mach-bf537/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 58abbed0a22..ce934ee174e 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -45,7 +45,7 @@
 #include <asm/gpio.h>
 #include <asm/nand.h>
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 #include <asm/dpmc.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
@@ -61,7 +61,7 @@ const char bfin_board_name[] = "Bluetechnix CM-BF548";
 
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
 	.width =	480,
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index 0d6333ada1d..39357693046 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -48,7 +48,7 @@
 #include <asm/nand.h>
 #include <asm/dpmc.h>
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 #include <linux/input.h>
 #include <linux/spi/ad7877.h>
 
@@ -106,7 +106,7 @@ arch_initcall(bfin_isp1761_init);
 
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 static struct bfin_bf54xfb_mach_info bf54x_lq043_data = {
 	.width =	480,
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index e3000f70a26..4d5cfeacb12 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -31,8 +31,8 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
 .section .l1.text
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/anomaly.h
rename to arch/blackfin/mach-bf548/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/arch/blackfin/mach-bf548/include/mach/bf548.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/bf548.h
rename to arch/blackfin/mach-bf548/include/mach/bf548.h
diff --git a/include/asm-blackfin/mach-bf548/bf54x-lq043.h b/arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/bf54x-lq043.h
rename to arch/blackfin/mach-bf548/include/mach/bf54x-lq043.h
diff --git a/include/asm-blackfin/mach-bf548/bf54x_keys.h b/arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/bf54x_keys.h
rename to arch/blackfin/mach-bf548/include/mach/bf54x_keys.h
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
rename to arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
diff --git a/include/asm-blackfin/mach-bf548/bfin_sir.h b/arch/blackfin/mach-bf548/include/mach/bfin_sir.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/bfin_sir.h
rename to arch/blackfin/mach-bf548/include/mach/bfin_sir.h
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/arch/blackfin/mach-bf548/include/mach/blackfin.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/blackfin.h
rename to arch/blackfin/mach-bf548/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf548/cdefBF542.h b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
similarity index 99%
rename from include/asm-blackfin/mach-bf548/cdefBF542.h
rename to arch/blackfin/mach-bf548/include/mach/cdefBF542.h
index 60b9f77576f..07aefb9ed79 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF542.h
@@ -35,7 +35,7 @@
 #include "defBF542.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF544.h b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
similarity index 99%
rename from include/asm-blackfin/mach-bf548/cdefBF544.h
rename to arch/blackfin/mach-bf548/include/mach/cdefBF544.h
index ea9b4ab496f..431a6927899 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF544.h
@@ -35,7 +35,7 @@
 #include "defBF544.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF547.h b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
similarity index 99%
rename from include/asm-blackfin/mach-bf548/cdefBF547.h
rename to arch/blackfin/mach-bf548/include/mach/cdefBF547.h
index ba716277c00..93376e90dfc 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF547.h
@@ -35,7 +35,7 @@
 #include "defBF548.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF548.h b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
similarity index 99%
rename from include/asm-blackfin/mach-bf548/cdefBF548.h
rename to arch/blackfin/mach-bf548/include/mach/cdefBF548.h
index ae971ebff6a..9cd74384136 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF548.h
@@ -35,7 +35,7 @@
 #include "defBF548.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF549.h b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
similarity index 99%
rename from include/asm-blackfin/mach-bf548/cdefBF549.h
rename to arch/blackfin/mach-bf548/include/mach/cdefBF549.h
index 92d07d96199..ead360b69de 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/cdefBF549.h
@@ -35,7 +35,7 @@
 #include "defBF549.h"
 
 /* include core sbfin_read_()ecific register pointer definitions */
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
 
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/cdefBF54x_base.h
rename to arch/blackfin/mach-bf548/include/mach/cdefBF54x_base.h
diff --git a/include/asm-blackfin/mach-bf548/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
similarity index 99%
rename from include/asm-blackfin/mach-bf548/defBF542.h
rename to arch/blackfin/mach-bf548/include/mach/defBF542.h
index a7c809f29ed..b1316541b8d 100644
--- a/include/asm-blackfin/mach-bf548/defBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -32,7 +32,7 @@
 #define _DEF_BF542_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF542 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/arch/blackfin/mach-bf548/include/mach/defBF544.h
similarity index 99%
rename from include/asm-blackfin/mach-bf548/defBF544.h
rename to arch/blackfin/mach-bf548/include/mach/defBF544.h
index b8b9870e269..c2c785bdc5f 100644
--- a/include/asm-blackfin/mach-bf548/defBF544.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF544.h
@@ -32,7 +32,7 @@
 #define _DEF_BF544_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF544 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
similarity index 99%
rename from include/asm-blackfin/mach-bf548/defBF547.h
rename to arch/blackfin/mach-bf548/include/mach/defBF547.h
index 3a3a18ebb10..661f0d877bd 100644
--- a/include/asm-blackfin/mach-bf548/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -32,7 +32,7 @@
 #define _DEF_BF548_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/arch/blackfin/mach-bf548/include/mach/defBF548.h
similarity index 99%
rename from include/asm-blackfin/mach-bf548/defBF548.h
rename to arch/blackfin/mach-bf548/include/mach/defBF548.h
index 1d7c96edb03..85d4bade911 100644
--- a/include/asm-blackfin/mach-bf548/defBF548.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF548.h
@@ -32,7 +32,7 @@
 #define _DEF_BF548_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF548 */
 
diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/arch/blackfin/mach-bf548/include/mach/defBF549.h
similarity index 99%
rename from include/asm-blackfin/mach-bf548/defBF549.h
rename to arch/blackfin/mach-bf548/include/mach/defBF549.h
index fcb72b41e00..09673454164 100644
--- a/include/asm-blackfin/mach-bf548/defBF549.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF549.h
@@ -32,7 +32,7 @@
 #define _DEF_BF549_H
 
 /* Include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 
 /* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF549 */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/defBF54x_base.h
rename to arch/blackfin/mach-bf548/include/mach/defBF54x_base.h
diff --git a/include/asm-blackfin/mach-bf548/dma.h b/arch/blackfin/mach-bf548/include/mach/dma.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/dma.h
rename to arch/blackfin/mach-bf548/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/arch/blackfin/mach-bf548/include/mach/gpio.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/gpio.h
rename to arch/blackfin/mach-bf548/include/mach/gpio.h
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/irq.h
rename to arch/blackfin/mach-bf548/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf548/mem_init.h b/arch/blackfin/mach-bf548/include/mach/mem_init.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/mem_init.h
rename to arch/blackfin/mach-bf548/include/mach/mem_init.h
diff --git a/include/asm-blackfin/mach-bf548/mem_map.h b/arch/blackfin/mach-bf548/include/mach/mem_map.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/mem_map.h
rename to arch/blackfin/mach-bf548/include/mach/mem_map.h
diff --git a/include/asm-blackfin/mach-bf548/portmux.h b/arch/blackfin/mach-bf548/include/mach/portmux.h
similarity index 100%
rename from include/asm-blackfin/mach-bf548/portmux.h
rename to arch/blackfin/mach-bf548/include/mach/portmux.h
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index c7a81e34703..75ea6a90582 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -31,8 +31,8 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
 #endif
 
 .section .l1.text
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
similarity index 100%
rename from include/asm-blackfin/mach-bf561/anomaly.h
rename to arch/blackfin/mach-bf561/include/mach/anomaly.h
diff --git a/include/asm-blackfin/mach-bf561/bf561.h b/arch/blackfin/mach-bf561/include/mach/bf561.h
similarity index 100%
rename from include/asm-blackfin/mach-bf561/bf561.h
rename to arch/blackfin/mach-bf561/include/mach/bf561.h
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
similarity index 100%
rename from include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
rename to arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
diff --git a/include/asm-blackfin/mach-bf561/bfin_sir.h b/arch/blackfin/mach-bf561/include/mach/bfin_sir.h
similarity index 100%
rename from include/asm-blackfin/mach-bf561/bfin_sir.h
rename to arch/blackfin/mach-bf561/include/mach/bfin_sir.h
diff --git a/include/asm-blackfin/mach-bf561/blackfin.h b/arch/blackfin/mach-bf561/include/mach/blackfin.h
similarity index 100%
rename from include/asm-blackfin/mach-bf561/blackfin.h
rename to arch/blackfin/mach-bf561/include/mach/blackfin.h
diff --git a/include/asm-blackfin/mach-bf561/cdefBF561.h b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
similarity index 99%
rename from include/asm-blackfin/mach-bf561/cdefBF561.h
rename to arch/blackfin/mach-bf561/include/mach/cdefBF561.h
index b07ffccd66d..c14d63402e7 100644
--- a/include/asm-blackfin/mach-bf561/cdefBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/cdefBF561.h
@@ -37,7 +37,7 @@
 #include "defBF561.h"
 
 /*include core specific register pointer definitions*/
-#include <asm/mach-common/cdef_LPBlackfin.h>
+#include <asm/cdef_LPBlackfin.h>
 
 #include <asm/system.h>
 
diff --git a/include/asm-blackfin/mach-bf561/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h
similarity index 99%
rename from include/asm-blackfin/mach-bf561/defBF561.h
rename to arch/blackfin/mach-bf561/include/mach/defBF561.h
index 1ab50e906fe..4eca2026bb9 100644
--- a/include/asm-blackfin/mach-bf561/defBF561.h
+++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h
@@ -37,7 +37,7 @@
 #endif
 */
 /* include all Core registers and bit definitions */
-#include <asm/mach-common/def_LPBlackfin.h>
+#include <asm/def_LPBlackfin.h>
 
 /*********************************************************************************** */
 /* System MMR Register Map */
diff --git a/include/asm-blackfin/mach-bf561/dma.h b/arch/blackfin/mach-bf561/include/mach/dma.h
similarity index 100%
rename from include/asm-blackfin/mach-bf561/dma.h
rename to arch/blackfin/mach-bf561/include/mach/dma.h
diff --git a/include/asm-blackfin/mach-bf561/irq.h b/arch/blackfin/mach-bf561/include/mach/irq.h
similarity index 100%
rename from include/asm-blackfin/mach-bf561/irq.h
rename to arch/blackfin/mach-bf561/include/mach/irq.h
diff --git a/include/asm-blackfin/mach-bf561/mem_init.h b/arch/blackfin/mach-bf561/include/mach/mem_init.h
similarity index 100%
rename from include/asm-blackfin/mach-bf561/mem_init.h
rename to arch/blackfin/mach-bf561/include/mach/mem_init.h
diff --git a/include/asm-blackfin/mach-bf561/mem_map.h b/arch/blackfin/mach-bf561/include/mach/mem_map.h
similarity index 100%
rename from include/asm-blackfin/mach-bf561/mem_map.h
rename to arch/blackfin/mach-bf561/include/mach/mem_map.h
diff --git a/include/asm-blackfin/mach-bf561/portmux.h b/arch/blackfin/mach-bf561/include/mach/portmux.h
similarity index 100%
rename from include/asm-blackfin/mach-bf561/portmux.h
rename to arch/blackfin/mach-bf561/include/mach/portmux.h
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 5986758b275..98133b968f7 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -28,8 +28,8 @@
  */
 
 #include <asm/fixed_code.h>
-#include <asm/mach/anomaly.h>
-#include <asm/mach-common/clocks.h>
+#include <mach/anomaly.h>
+#include <asm/clocks.h>
 
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index 838b0b2ce9a..ad5431e2cd0 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -6,7 +6,7 @@
 
 #include <linux/linkage.h>
 #include <asm/blackfin.h>
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
 #include <asm/dpmc.h>
 
 .section .l1.text
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 117c01c2c6b..847c172a99e 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -43,7 +43,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/trace.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 #if defined(CONFIG_BFIN_SCRATCH_REG_RETN)
 # define EX_SCRATCH_REG RETN
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 7f752c87fe4..b27e59d3240 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -29,7 +29,7 @@
  */
 
 #include <asm/blackfin.h>
-#include <asm/mach/irq.h>
+#include <mach/irq.h>
 #include <linux/linkage.h>
 #include <asm/entry.h>
 #include <asm/asm-offsets.h>
@@ -37,7 +37,7 @@
 #include <asm/traps.h>
 #include <asm/thread_info.h>
 
-#include <asm/mach-common/context.S>
+#include <asm/context.S>
 
 .extern _ret_from_exception
 
diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c
index 6f227d3dbda..e348cfccc17 100644
--- a/drivers/input/keyboard/bf54x-keys.c
+++ b/drivers/input/keyboard/bf54x-keys.c
@@ -43,7 +43,7 @@
 #include <linux/input.h>
 
 #include <asm/portmux.h>
-#include <asm/mach/bf54x_keys.h>
+#include <mach/bf54x_keys.h>
 
 #define DRV_NAME	"bf54x-keys"
 #define TIME_SCALE	100	/* 100 ns */
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index efcd44344fb..4a0d30bed9f 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -28,7 +28,7 @@
 #endif
 
 #include <asm/gpio.h>
-#include <asm/mach/bfin_serial_5xx.h>
+#include <mach/bfin_serial_5xx.h>
 
 #ifdef CONFIG_SERIAL_BFIN_DMA
 #include <linux/dma-mapping.h>
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c
index 6d5aa806777..7644ed24956 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/bf54x-lq043fb.c
@@ -58,7 +58,7 @@
 #include <asm/gpio.h>
 #include <asm/portmux.h>
 
-#include <asm/mach/bf54x-lq043.h>
+#include <mach/bf54x-lq043.h>
 
 #define NO_BL_SUPPORT
 
-- 
GitLab


From a95ca3b2b9dee628ef57df38f0b263e5a4355953 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 27 Aug 2008 10:55:05 +0800
Subject: [PATCH 471/869] Blackfin arch: let PCI depend on BROKEN

AFAIR there exists blackfin hardware with PCI support, but the support
currently in the kernel fails to build starting with:

...
  CC      drivers/pci/probe.o
probe.c: In function 'pci_scan_slot':
probe.c:1056: error: implicit declaration of function 'pcibios_scan_all_fns'
make[3]: *** [drivers/pci/probe.o] Error 1

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index f64d25973a3..4154ff1101f 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -855,6 +855,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 
 config PCI
 	bool "PCI support"
+	depends on BROKEN
 	help
 	  Support for PCI bus.
 
-- 
GitLab


From 93a1a5eb70be5cc14990b97ef2460212e32658dc Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 27 Aug 2008 07:56:43 +0200
Subject: [PATCH 472/869] Revert "ALSA: hda - Added model selection for iMac
 24""

This reverts commit 3e0e469fa216ec70c93b1593821b759d19ee2e6b.

The patch introduced a wrong detection of other intel Macs with
ALC88* codec because they share the same PCI SSID (but have different
codec subsystem-IDs).  See http://lkml.org/lkml/2008/8/24/143

Reported-and-tested-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 909f1c101c9..d6ec9eef291 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6197,7 +6197,6 @@ static struct snd_pci_quirk alc882_cfg_tbl[] = {
 	SND_PCI_QUIRK(0x1043, 0x817f, "Asus P5LD2", ALC882_6ST_DIG),
 	SND_PCI_QUIRK(0x1043, 0x81d8, "Asus P5WD", ALC882_6ST_DIG),
 	SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC882_6ST_DIG),
-	SND_PCI_QUIRK(0x106b, 0x00a0, "Apple iMac 24''", ALC885_IMAC24),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte P35 DS3R", ALC882_6ST_DIG),
 	SND_PCI_QUIRK(0x1462, 0x28fb, "Targa T8", ALC882_TARGA), /* MSI-1049 T8  */
 	SND_PCI_QUIRK(0x1462, 0x6668, "MSI", ALC882_6ST_DIG),
-- 
GitLab


From c1b362e3b4d331a63915b268a33207311a439d60 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 25 Aug 2008 15:06:35 -0700
Subject: [PATCH 473/869] x86: update defconfigs

Enable some option commonly used by testers in defconfig, including
some very common device drivers and network boot support.  defconfig
is still not meant to be a kitchen-sink configuration.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/configs/i386_defconfig   | 303 +++++++++++++++++-------------
 arch/x86/configs/x86_64_defconfig | 258 +++++++++++++++----------
 2 files changed, 334 insertions(+), 227 deletions(-)

diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 4d73f53287b..104275e191a 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May  4 19:59:02 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 15:04:00 2008
 #
 # CONFIG_64BIT is not set
 CONFIG_X86_32=y
 # CONFIG_X86_64 is not set
 CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/i386_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
 # CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 CONFIG_KTIME_SCALAR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -132,27 +134,35 @@ CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 CONFIG_BLK_DEV_IO_TRACE=y
 # CONFIG_LSF is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -176,19 +186,17 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
 # CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
 # CONFIG_X86_VSMP is not set
+# CONFIG_X86_RDC321X is not set
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_PARAVIRT_GUEST is not set
+# CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
 # CONFIG_M486 is not set
 # CONFIG_M586 is not set
@@ -215,21 +223,19 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 # CONFIG_MPSC is not set
 CONFIG_MCORE2=y
 # CONFIG_GENERIC_CPU is not set
-# CONFIG_X86_GENERIC is not set
+CONFIG_X86_GENERIC=y
 CONFIG_X86_CPU=y
 CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=6
+CONFIG_X86_L1_CACHE_SHIFT=7
 CONFIG_X86_XADD=y
 CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INVLPG=y
 CONFIG_X86_BSWAP=y
 CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=6
+CONFIG_X86_MINIMUM_CPU_FAMILY=4
 CONFIG_X86_DEBUGCTLMSR=y
 CONFIG_HPET_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
@@ -247,7 +253,7 @@ CONFIG_X86_IO_APIC=y
 CONFIG_VM86=y
 # CONFIG_TOSHIBA is not set
 # CONFIG_I8K is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
+CONFIG_X86_REBOOTFIXUPS=y
 # CONFIG_MICROCODE is not set
 CONFIG_X86_MSR=y
 CONFIG_X86_CPUID=y
@@ -256,32 +262,28 @@ CONFIG_HIGHMEM4G=y
 # CONFIG_HIGHMEM64G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_HIGHMEM=y
-CONFIG_NEED_NODE_MEMMAP_SIZE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-
-#
-# Memory hotplug is currently incompatible with Software Suspend
-#
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_HIGHPTE is not set
+CONFIG_HIGHPTE=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_MTRR=y
-# CONFIG_X86_PAT is not set
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_X86_PAT=y
 CONFIG_EFI=y
 # CONFIG_IRQBALANCE is not set
 CONFIG_SECCOMP=y
@@ -293,6 +295,7 @@ CONFIG_HZ=1000
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
 CONFIG_PHYSICAL_START=0x1000000
 CONFIG_RELOCATABLE=y
 CONFIG_PHYSICAL_ALIGN=0x200000
@@ -312,6 +315,7 @@ CONFIG_PM_TRACE_RTC=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -337,6 +341,7 @@ CONFIG_ACPI_THERMAL=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
@@ -395,8 +400,8 @@ CONFIG_PCI=y
 # CONFIG_PCI_GOBIOS is not set
 # CONFIG_PCI_GOMMCONFIG is not set
 # CONFIG_PCI_GODIRECT is not set
-CONFIG_PCI_GOANY=y
 # CONFIG_PCI_GOOLPC is not set
+CONFIG_PCI_GOANY=y
 CONFIG_PCI_BIOS=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
@@ -448,10 +453,6 @@ CONFIG_HOTPLUG_PCI=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -475,7 +476,10 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
@@ -618,7 +622,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -680,28 +683,19 @@ CONFIG_FIB_RULES=y
 CONFIG_CFG80211=y
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -717,6 +711,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
@@ -749,6 +745,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
@@ -760,10 +757,12 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_FUJITSU_LAPTOP is not set
 # CONFIG_TC1100_WMI is not set
 # CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
 # CONFIG_INTEL_MENLOW is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -802,12 +801,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -842,7 +842,7 @@ CONFIG_PATA_AMD=y
 # CONFIG_PATA_CS5536 is not set
 # CONFIG_PATA_CYPRESS is not set
 # CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
+CONFIG_ATA_GENERIC=y
 # CONFIG_PATA_HPT366 is not set
 # CONFIG_PATA_HPT37X is not set
 # CONFIG_PATA_HPT3X2N is not set
@@ -852,7 +852,7 @@ CONFIG_PATA_AMD=y
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
+CONFIG_PATA_MPIIX=y
 CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_NETCELL is not set
 # CONFIG_PATA_NINJA32 is not set
@@ -871,6 +871,7 @@ CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -894,13 +895,16 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -910,7 +914,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -943,10 +963,10 @@ CONFIG_FORCEDETH=y
 CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
+CONFIG_NE2K_PCI=y
 # CONFIG_8139CP is not set
 CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
+# CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
@@ -961,25 +981,24 @@ CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
+CONFIG_E1000E=y
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 CONFIG_SKY2=y
 # CONFIG_SKY2_DEBUG is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -1019,13 +1038,14 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
@@ -1105,6 +1125,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -1139,12 +1160,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1173,6 +1196,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1223,8 +1247,8 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_AMD is not set
+CONFIG_HW_RANDOM_INTEL=y
+CONFIG_HW_RANDOM_AMD=y
 CONFIG_HW_RANDOM_GEODE=y
 CONFIG_HW_RANDOM_VIA=y
 CONFIG_NVRAM=y
@@ -1245,7 +1269,6 @@ CONFIG_NVRAM=y
 # CONFIG_CS5535_GPIO is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 # CONFIG_HPET_MMAP is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
@@ -1254,43 +1277,64 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_SCx200_ACB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1299,6 +1343,8 @@ CONFIG_I2C_I801=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1360,8 +1406,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1372,6 +1420,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1418,7 +1467,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1463,6 +1511,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1470,6 +1519,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
 
 #
 # Display device support
@@ -1489,15 +1539,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1515,20 +1557,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_PCSP is not set
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1603,36 +1639,14 @@ CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1668,6 +1682,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1691,6 +1706,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1712,6 +1728,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1720,7 +1737,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1733,7 +1749,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1750,6 +1765,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1759,7 +1775,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1805,6 +1823,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1837,11 +1856,13 @@ CONFIG_DMADEVICES=y
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
 
 #
 # File systems
@@ -1920,14 +1941,27 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -2001,9 +2035,9 @@ CONFIG_NLS_UTF8=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -2033,6 +2067,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -2043,23 +2078,32 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_X86_PTDUMP is not set
 CONFIG_DEBUG_RODATA=y
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
 # CONFIG_4KSTACKS is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
-CONFIG_X86_MPPARSE=y
 CONFIG_DOUBLEFAULT=y
+# CONFIG_MMIOTRACE is not set
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2071,6 +2115,7 @@ CONFIG_IO_DELAY_0X80=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=0
 CONFIG_DEBUG_BOOT_PARAMS=y
 # CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
 
 #
 # Security options
@@ -2080,7 +2125,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2141,6 +2185,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -2151,7 +2199,7 @@ CONFIG_CRYPTO_SHA1=y
 # Ciphers
 #
 CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
+CONFIG_CRYPTO_AES_586=y
 # CONFIG_CRYPTO_ANUBIS is not set
 CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_BLOWFISH is not set
@@ -2193,6 +2241,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index a4045242962..678c8acefe0 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Sun May  4 19:59:57 2008
+# Linux kernel version: 2.6.27-rc4
+# Mon Aug 25 14:40:46 2008
 #
 CONFIG_64BIT=y
 # CONFIG_X86_32 is not set
 CONFIG_X86_64=y
 CONFIG_X86=y
-CONFIG_DEFCONFIG_LIST="arch/x86/configs/x86_64_defconfig"
+CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
 # CONFIG_GENERIC_LOCKBREAK is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CMOS_UPDATE=y
@@ -53,6 +53,7 @@ CONFIG_X86_HT=y
 CONFIG_X86_BIOS_REBOOT=y
 CONFIG_X86_TRAMPOLINE=y
 # CONFIG_KTIME_SCALAR is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # General setup
@@ -82,6 +83,7 @@ CONFIG_CGROUPS=y
 CONFIG_CGROUP_NS=y
 # CONFIG_CGROUP_DEVICE is not set
 CONFIG_CPUSETS=y
+CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
@@ -105,7 +107,6 @@ CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -113,6 +114,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -132,25 +134,33 @@ CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
 CONFIG_KRETPROBES=y
+CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_HAVE_CLK is not set
 CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -175,20 +185,15 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
+CONFIG_X86_FIND_SMP_CONFIG=y
+CONFIG_X86_MPPARSE=y
 CONFIG_X86_PC=y
 # CONFIG_X86_ELAN is not set
 # CONFIG_X86_VOYAGER is not set
-# CONFIG_X86_NUMAQ is not set
-# CONFIG_X86_SUMMIT is not set
-# CONFIG_X86_BIGSMP is not set
-# CONFIG_X86_VISWS is not set
 # CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_ES7000 is not set
-# CONFIG_X86_RDC321X is not set
 # CONFIG_X86_VSMP is not set
 # CONFIG_PARAVIRT_GUEST is not set
-CONFIG_MEMTEST_BOOTPARAM=y
-CONFIG_MEMTEST_BOOTPARAM_VALUE=0
+# CONFIG_MEMTEST is not set
 # CONFIG_M386 is not set
 # CONFIG_M486 is not set
 # CONFIG_M586 is not set
@@ -220,11 +225,12 @@ CONFIG_X86_L1_CACHE_BYTES=64
 CONFIG_X86_INTERNODE_CACHE_BYTES=64
 CONFIG_X86_CMPXCHG=y
 CONFIG_X86_L1_CACHE_SHIFT=6
-CONFIG_X86_GOOD_APIC=y
+CONFIG_X86_WP_WORKS_OK=y
 CONFIG_X86_INTEL_USERCOPY=y
 CONFIG_X86_USE_PPRO_CHECKSUM=y
 CONFIG_X86_P6_NOP=y
 CONFIG_X86_TSC=y
+CONFIG_X86_CMPXCHG64=y
 CONFIG_X86_CMOV=y
 CONFIG_X86_MINIMUM_CPU_FAMILY=64
 CONFIG_X86_DEBUGCTLMSR=y
@@ -234,8 +240,10 @@ CONFIG_DMI=y
 CONFIG_GART_IOMMU=y
 CONFIG_CALGARY_IOMMU=y
 CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
+CONFIG_AMD_IOMMU=y
 CONFIG_SWIOTLB=y
 CONFIG_IOMMU_HELPER=y
+# CONFIG_MAXSMP is not set
 CONFIG_NR_CPUS=4
 # CONFIG_SCHED_SMT is not set
 CONFIG_SCHED_MC=y
@@ -281,6 +289,7 @@ CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_MTRR=y
+# CONFIG_MTRR_SANITIZER is not set
 # CONFIG_X86_PAT is not set
 CONFIG_EFI=y
 CONFIG_SECCOMP=y
@@ -313,6 +322,7 @@ CONFIG_PM_TRACE_RTC=y
 CONFIG_PM_SLEEP_SMP=y
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
@@ -339,6 +349,7 @@ CONFIG_ACPI_NUMA=y
 CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_EC=y
+# CONFIG_ACPI_PCI_SLOT is not set
 CONFIG_ACPI_POWER=y
 CONFIG_ACPI_SYSTEM=y
 CONFIG_X86_PM_TIMER=y
@@ -437,10 +448,6 @@ CONFIG_IA32_EMULATION=y
 CONFIG_COMPAT=y
 CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
 CONFIG_SYSVIPC_COMPAT=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -464,7 +471,10 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
 CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 CONFIG_IP_MROUTE=y
@@ -607,7 +617,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -669,28 +678,19 @@ CONFIG_FIB_RULES=y
 CONFIG_CFG80211=y
 CONFIG_NL80211=y
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_MAC80211=y
 
 #
 # Rate control algorithm selection
 #
+CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
 CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_MESH is not set
 CONFIG_MAC80211_LEDS=y
 # CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -706,6 +706,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 CONFIG_DEBUG_DEVRES=y
 # CONFIG_SYS_HYPERVISOR is not set
@@ -738,6 +740,7 @@ CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_IBM_ASM is not set
 # CONFIG_PHANTOM is not set
@@ -748,10 +751,14 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ASUS_LAPTOP is not set
 # CONFIG_FUJITSU_LAPTOP is not set
 # CONFIG_MSI_LAPTOP is not set
+# CONFIG_COMPAL_LAPTOP is not set
 # CONFIG_SONY_LAPTOP is not set
 # CONFIG_THINKPAD_ACPI is not set
 # CONFIG_INTEL_MENLOW is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_SGI_XP is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_SGI_GRU is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -790,12 +797,13 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
 # CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_ATA_ACPI=y
@@ -857,6 +865,7 @@ CONFIG_PATA_OLDPIIX=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+CONFIG_PATA_SCH=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 # CONFIG_MD_LINEAR is not set
@@ -880,13 +889,16 @@ CONFIG_DM_ZERO=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_MACINTOSH_DRIVERS=y
 CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_IFB is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -896,7 +908,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_VETH is not set
 # CONFIG_NET_SB1000 is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
@@ -940,16 +968,15 @@ CONFIG_8139TOO_PIO=y
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -965,6 +992,7 @@ CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -1003,13 +1031,14 @@ CONFIG_WLAN_80211=y
 # CONFIG_RTL8180 is not set
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
+# CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
 CONFIG_ATH5K=y
 # CONFIG_ATH5K_DEBUG is not set
-# CONFIG_IWLWIFI is not set
+# CONFIG_ATH9K is not set
 # CONFIG_IWLCORE is not set
 # CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWL4965 is not set
+# CONFIG_IWLAGN is not set
 # CONFIG_IWL3945 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
@@ -1088,6 +1117,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 CONFIG_INPUT_JOYSTICK=y
 # CONFIG_JOYSTICK_ANALOG is not set
@@ -1122,12 +1152,14 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_PCSPKR is not set
 # CONFIG_INPUT_APANEL is not set
@@ -1155,6 +1187,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -1222,7 +1255,6 @@ CONFIG_NVRAM=y
 # CONFIG_PC8736x_GPIO is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_HPET=y
-# CONFIG_HPET_RTC_IRQ is not set
 # CONFIG_HPET_MMAP is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
@@ -1231,42 +1263,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 CONFIG_I2C_I801=y
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -1275,6 +1328,8 @@ CONFIG_I2C_I801=y
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1335,8 +1390,10 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -1347,6 +1404,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
 # Multimedia drivers
@@ -1387,7 +1445,6 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -1430,6 +1487,7 @@ CONFIG_FB_EFI=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
 # CONFIG_FB_GEODE is not set
 # CONFIG_FB_VIRTUAL is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
@@ -1437,6 +1495,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_BACKLIGHT_CORGI is not set
 # CONFIG_BACKLIGHT_PROGEAR is not set
+# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
 
 #
 # Display device support
@@ -1456,15 +1515,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -1482,20 +1533,14 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_PCSP is not set
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
@@ -1568,36 +1613,14 @@ CONFIG_SND_HDA_GENERIC=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# PCMCIA devices
-#
+CONFIG_SND_PCMCIA=y
 # CONFIG_SND_VXPOCKET is not set
 # CONFIG_SND_PDAUDIOCF is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1633,6 +1656,7 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
 
 #
 # USB Host Controller Drivers
@@ -1656,6 +1680,7 @@ CONFIG_USB_UHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1677,6 +1702,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_SIERRA is not set
 # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
@@ -1685,7 +1711,6 @@ CONFIG_USB_LIBUSUAL=y
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -1698,7 +1723,6 @@ CONFIG_USB_MON=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1715,6 +1739,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1724,7 +1749,9 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_CLEVO_MAIL is not set
+# CONFIG_LEDS_PCA955X is not set
 
 #
 # LED Triggers
@@ -1770,6 +1797,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -1802,11 +1830,13 @@ CONFIG_DMADEVICES=y
 # Firmware Drivers
 #
 # CONFIG_EDD is not set
+CONFIG_FIRMWARE_MEMMAP=y
 CONFIG_EFI_VARS=y
 # CONFIG_DELL_RBU is not set
 # CONFIG_DCDBAS is not set
 CONFIG_DMIID=y
-# CONFIG_ISCSI_IBFT_FIND is not set
+CONFIG_ISCSI_IBFT_FIND=y
+CONFIG_ISCSI_IBFT=y
 
 #
 # File systems
@@ -1886,14 +1916,27 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
@@ -1967,9 +2010,9 @@ CONFIG_NLS_UTF8=y
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1998,6 +2041,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -2008,11 +2052,20 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SYSPROF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
-# CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 # CONFIG_STRICT_DEVMEM is not set
+CONFIG_X86_VERBOSE_BOOTUP=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
@@ -2023,8 +2076,8 @@ CONFIG_DEBUG_RODATA=y
 # CONFIG_DIRECT_GBPAGES is not set
 # CONFIG_DEBUG_RODATA_TEST is not set
 CONFIG_DEBUG_NX_TEST=m
-CONFIG_X86_MPPARSE=y
 # CONFIG_IOMMU_DEBUG is not set
+# CONFIG_MMIOTRACE is not set
 CONFIG_IO_DELAY_TYPE_0X80=0
 CONFIG_IO_DELAY_TYPE_0XED=1
 CONFIG_IO_DELAY_TYPE_UDELAY=2
@@ -2036,6 +2089,7 @@ CONFIG_IO_DELAY_0X80=y
 CONFIG_DEFAULT_IO_DELAY_TYPE=0
 CONFIG_DEBUG_BOOT_PARAMS=y
 # CONFIG_CPA_DEBUG is not set
+# CONFIG_OPTIMIZE_INLINING is not set
 
 #
 # Security options
@@ -2045,7 +2099,6 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
-CONFIG_SECURITY_CAPABILITIES=y
 CONFIG_SECURITY_FILE_CAPABILITIES=y
 # CONFIG_SECURITY_ROOTPLUG is not set
 CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
@@ -2106,6 +2159,10 @@ CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -2155,6 +2212,7 @@ CONFIG_GENERIC_FIND_FIRST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-- 
GitLab


From 74870172824a78640ec4f03058d9bd35dfa08618 Mon Sep 17 00:00:00 2001
From: Zhu Yi <yi.zhu@intel.com>
Date: Wed, 27 Aug 2008 14:33:00 +0800
Subject: [PATCH 474/869] lockdep: fix invalid list_del_rcu in zap_class

The problem is found during iwlagn driver testing on
v2.6.27-rc4-176-gb8e6c91 kernel, but it turns out to be a lockdep bug.
In our testing, we frequently load and unload the iwlagn driver
(>50 times). Then the MAX_STACK_TRACE_ENTRIES is reached (expected
behaviour?). The error message with the call trace is as below.

BUG: MAX_STACK_TRACE_ENTRIES too low!
turning off the locking correctness validator.
Pid: 4895, comm: iwlagn Not tainted 2.6.27-rc4 #13

Call Trace:
 [<ffffffff81014aa1>] save_stack_trace+0x22/0x3e
 [<ffffffff8105390a>] save_trace+0x8b/0x91
 [<ffffffff81054e60>] mark_lock+0x1b0/0x8fa
 [<ffffffff81056f71>] __lock_acquire+0x5b9/0x716
 [<ffffffffa00d818a>] ieee80211_sta_work+0x0/0x6ea [mac80211]
 [<ffffffff81057120>] lock_acquire+0x52/0x6b
 [<ffffffff81045f0e>] run_workqueue+0x97/0x1ed
 [<ffffffff81045f5e>] run_workqueue+0xe7/0x1ed
 [<ffffffff81045f0e>] run_workqueue+0x97/0x1ed
 [<ffffffff81046ae4>] worker_thread+0xd8/0xe3
 [<ffffffff81049503>] autoremove_wake_function+0x0/0x2e
 [<ffffffff81046a0c>] worker_thread+0x0/0xe3
 [<ffffffff810493ec>] kthread+0x47/0x73
 [<ffffffff8128e3ab>] trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff8100cea9>] child_rip+0xa/0x11
 [<ffffffff8100c4df>] restore_args+0x0/0x30
 [<ffffffff810316e1>] finish_task_switch+0x0/0xcc
 [<ffffffff810493a5>] kthread+0x0/0x73
 [<ffffffff8100ce9f>] child_rip+0x0/0x11

Although the above is harmless, when the ilwagn module is removed
later lockdep will trigger a kernel oops as below.

BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
IP: [<ffffffff810531e1>] zap_class+0x24/0x82
PGD 73128067 PUD 7448c067 PMD 0
Oops: 0002 [1] SMP
CPU 0
Modules linked in: rfcomm l2cap bluetooth autofs4 sunrpc
nf_conntrack_ipv6 xt_state nf_conntrack xt_tcpudp ip6t_ipv6header
ip6t_REJECT ip6table_filter ip6_tables x_tables ipv6 cpufreq_ondemand
acpi_cpufreq dm_mirror dm_log dm_multipath dm_mod snd_hda_intel sr_mod
snd_seq_dummy snd_seq_oss snd_seq_midi_event battery snd_seq
snd_seq_device cdrom button snd_pcm_oss snd_mixer_oss snd_pcm
snd_timer snd_page_alloc e1000e snd_hwdep sg iTCO_wdt
iTCO_vendor_support ac pcspkr i2c_i801 i2c_core snd soundcore video
output ata_piix ata_generic libata sd_mod scsi_mod ext3 jbd mbcache
uhci_hcd ohci_hcd ehci_hcd [last unloaded: mac80211]
Pid: 4941, comm: modprobe Not tainted 2.6.27-rc4 #10
RIP: 0010:[<ffffffff810531e1>]  [<ffffffff810531e1>]
zap_class+0x24/0x82
RSP: 0000:ffff88007bcb3eb0  EFLAGS: 00010046
RAX: 0000000000068ee8 RBX: ffffffff8192a0a0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000001dfb RDI: ffffffff816e70b0
RBP: ffffffffa00cd000 R08: ffffffff816818f8 R09: ffff88007c923558
R10: ffffe20002ad2408 R11: ffffffff811028ec R12: ffffffff8192a0a0
R13: 000000000002bd90 R14: 0000000000000000 R15: 0000000000000296
FS:  00007f9d1cee56f0(0000) GS:ffffffff814a58c0(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000008 CR3: 0000000073047000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process modprobe (pid: 4941, threadinfo ffff88007bcb2000, task
ffff8800758d1fc0)
Stack:  ffffffff81057376 0000000000000000 ffffffffa00f7b00
0000000000000000
 0000000000000080 0000000000618278 00007fff24f16720 0000000000000000
 ffffffff8105d37a ffffffffa00f7b00 ffffffff8105d591 313132303863616d
Call Trace:
 [<ffffffff81057376>] ? lockdep_free_key_range+0x61/0xf5
 [<ffffffff8105d37a>] ? free_module+0xd4/0xe4
 [<ffffffff8105d591>] ? sys_delete_module+0x1de/0x1f9
 [<ffffffff8106dbfa>] ? audit_syscall_entry+0x12d/0x160
 [<ffffffff8100be2b>] ? system_call_fastpath+0x16/0x1b

Code: b2 00 01 00 00 00 c3 31 f6 49 c7 c0 10 8a 61 81 eb 32 49 39 38
75 26 48 98 48 6b c0 38 48 8b 90 08 8a 61 81 48 8b 88 00 8a 61 81 <48>
89 51 08 48 89 0a 48 c7 80 08 8a 61 81 00 02 20 00 48 ff c6
RIP  [<ffffffff810531e1>] zap_class+0x24/0x82
 RSP <ffff88007bcb3eb0>
CR2: 0000000000000008
---[ end trace a1297e0c4abb0f2e ]---

The root cause for this oops is in add_lock_to_list() when
save_trace() fails due to MAX_STACK_TRACE_ENTRIES is reached,
entry->class is assigned but entry is never added into any lock list.
This makes the list_del_rcu() in zap_class() oops later when the
module is unloaded. This patch fixes the problem by assigning
entry->class after save_trace() returns success.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/lockdep.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/lockdep.c b/kernel/lockdep.c
index b5db51d2803..dbda475b13b 100644
--- a/kernel/lockdep.c
+++ b/kernel/lockdep.c
@@ -875,11 +875,11 @@ static int add_lock_to_list(struct lock_class *class, struct lock_class *this,
 	if (!entry)
 		return 0;
 
-	entry->class = this;
-	entry->distance = distance;
 	if (!save_trace(&entry->trace))
 		return 0;
 
+	entry->class = this;
+	entry->distance = distance;
 	/*
 	 * Since we never remove from the dependency list, the list can
 	 * be walked lockless by other CPUs, it's only allocation
-- 
GitLab


From 2633f0e57b1127f4060d70bf460140dc9bb19386 Mon Sep 17 00:00:00 2001
From: Steve VanDeBogart <vandebo-lkml@NerdBox.Net>
Date: Tue, 26 Aug 2008 15:14:36 -0700
Subject: [PATCH 475/869] exit signals: use of uninitialized field notify_count

task->signal->notify_count is only initialized if
task->signal->group_exit_task is not NULL.  Reorder a conditional so
that uninitialised memory is not used.  Found by Valgrind.

Signed-off-by: Steve VanDeBogart <vandebo-lkml@nerdbox.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/exit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/kernel/exit.c b/kernel/exit.c
index 38ec4063014..75c64738763 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -918,8 +918,8 @@ static void exit_notify(struct task_struct *tsk, int group_dead)
 
 	/* mt-exec, de_thread() is waiting for us */
 	if (thread_group_leader(tsk) &&
-	    tsk->signal->notify_count < 0 &&
-	    tsk->signal->group_exit_task)
+	    tsk->signal->group_exit_task &&
+	    tsk->signal->notify_count < 0)
 		wake_up_process(tsk->signal->group_exit_task);
 
 	write_unlock_irq(&tasklist_lock);
-- 
GitLab


From abf5439370491dd6fbb4fe1a7939680d2a9bc9d4 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 16 Aug 2008 14:10:05 +0900
Subject: [PATCH 476/869] block: move cmdfilter from gendisk to request_queue

cmd_filter works only for the block layer SG_IO with SCSI block
devices. It breaks scsi/sg.c, bsg, and the block layer SG_IO with SCSI
character devices (such as st). We hit a kernel crash with them.

The problem is that cmd_filter code accesses to gendisk (having struct
blk_scsi_cmd_filter) via inode->i_bdev->bd_disk. It works for only
SCSI block device files. With character device files, inode->i_bdev
leads you to struct cdev. inode->i_bdev->bd_disk->blk_scsi_cmd_filter
isn't safe.

SCSI ULDs don't expose gendisk; they keep it private. bsg needs to be
independent on any protocols. We shouldn't change ULDs to expose their
gendisk.

This patch moves struct blk_scsi_cmd_filter from gendisk to
request_queue, a common object, which eveyone can access to.

The user interface doesn't change; users can change the filters via
/sys/block/. gendisk has a pointer to request_queue so the cmd_filter
code accesses to struct blk_scsi_cmd_filter.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-core.c       |   2 +
 block/bsg.c            |  44 ++++-----------
 block/cmd-filter.c     | 118 +++--------------------------------------
 block/scsi_ioctl.c     |  94 ++++++++++++++++++++++++++++++--
 drivers/scsi/sg.c      |  11 +++-
 include/linux/blkdev.h |  16 ++++--
 include/linux/genhd.h  |  10 ----
 7 files changed, 132 insertions(+), 163 deletions(-)

diff --git a/block/blk-core.c b/block/blk-core.c
index 4889eb86a39..2cba5ef97b2 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -582,6 +582,8 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 
 	q->sg_reserved_size = INT_MAX;
 
+	blk_set_cmd_filter_defaults(&q->cmd_filter);
+
 	/*
 	 * all done
 	 */
diff --git a/block/bsg.c b/block/bsg.c
index 5a68b09a69b..0aae8d7ba99 100644
--- a/block/bsg.c
+++ b/block/bsg.c
@@ -45,8 +45,6 @@ struct bsg_device {
 	char name[BUS_ID_SIZE];
 	int max_queue;
 	unsigned long flags;
-	struct blk_scsi_cmd_filter *cmd_filter;
-	mode_t *f_mode;
 };
 
 enum {
@@ -174,7 +172,8 @@ unlock:
 }
 
 static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
-				struct sg_io_v4 *hdr, struct bsg_device *bd)
+				struct sg_io_v4 *hdr, struct bsg_device *bd,
+				int has_write_perm)
 {
 	if (hdr->request_len > BLK_MAX_CDB) {
 		rq->cmd = kzalloc(hdr->request_len, GFP_KERNEL);
@@ -187,8 +186,7 @@ static int blk_fill_sgv4_hdr_rq(struct request_queue *q, struct request *rq,
 		return -EFAULT;
 
 	if (hdr->subprotocol == BSG_SUB_PROTOCOL_SCSI_CMD) {
-		if (blk_cmd_filter_verify_command(bd->cmd_filter, rq->cmd,
-						 bd->f_mode))
+		if (blk_verify_command(&q->cmd_filter, rq->cmd, has_write_perm))
 			return -EPERM;
 	} else if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
@@ -244,7 +242,7 @@ bsg_validate_sgv4_hdr(struct request_queue *q, struct sg_io_v4 *hdr, int *rw)
  * map sg_io_v4 to a request.
  */
 static struct request *
-bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr)
+bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr, int has_write_perm)
 {
 	struct request_queue *q = bd->queue;
 	struct request *rq, *next_rq = NULL;
@@ -266,7 +264,7 @@ bsg_map_hdr(struct bsg_device *bd, struct sg_io_v4 *hdr)
 	rq = blk_get_request(q, rw, GFP_KERNEL);
 	if (!rq)
 		return ERR_PTR(-ENOMEM);
-	ret = blk_fill_sgv4_hdr_rq(q, rq, hdr, bd);
+	ret = blk_fill_sgv4_hdr_rq(q, rq, hdr, bd, has_write_perm);
 	if (ret)
 		goto out;
 
@@ -568,25 +566,6 @@ static inline void bsg_set_block(struct bsg_device *bd, struct file *file)
 		set_bit(BSG_F_BLOCK, &bd->flags);
 }
 
-static void bsg_set_cmd_filter(struct bsg_device *bd,
-			   struct file *file)
-{
-	struct inode *inode;
-	struct gendisk *disk;
-
-	if (!file)
-		return;
-
-	inode = file->f_dentry->d_inode;
-	if (!inode)
-		return;
-
-	disk = inode->i_bdev->bd_disk;
-
-	bd->cmd_filter = &disk->cmd_filter;
-	bd->f_mode = &file->f_mode;
-}
-
 /*
  * Check if the error is a "real" error that we should return.
  */
@@ -608,7 +587,6 @@ bsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	dprintk("%s: read %Zd bytes\n", bd->name, count);
 
 	bsg_set_block(bd, file);
-	bsg_set_cmd_filter(bd, file);
 
 	bytes_read = 0;
 	ret = __bsg_read(buf, count, bd, NULL, &bytes_read);
@@ -621,7 +599,7 @@ bsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 }
 
 static int __bsg_write(struct bsg_device *bd, const char __user *buf,
-		       size_t count, ssize_t *bytes_written)
+		       size_t count, ssize_t *bytes_written, int has_write_perm)
 {
 	struct bsg_command *bc;
 	struct request *rq;
@@ -652,7 +630,7 @@ static int __bsg_write(struct bsg_device *bd, const char __user *buf,
 		/*
 		 * get a request, fill in the blanks, and add to request queue
 		 */
-		rq = bsg_map_hdr(bd, &bc->hdr);
+		rq = bsg_map_hdr(bd, &bc->hdr, has_write_perm);
 		if (IS_ERR(rq)) {
 			ret = PTR_ERR(rq);
 			rq = NULL;
@@ -683,10 +661,11 @@ bsg_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
 	dprintk("%s: write %Zd bytes\n", bd->name, count);
 
 	bsg_set_block(bd, file);
-	bsg_set_cmd_filter(bd, file);
 
 	bytes_written = 0;
-	ret = __bsg_write(bd, buf, count, &bytes_written);
+	ret = __bsg_write(bd, buf, count, &bytes_written,
+			  file->f_mode & FMODE_WRITE);
+
 	*ppos = bytes_written;
 
 	/*
@@ -792,7 +771,6 @@ static struct bsg_device *bsg_add_device(struct inode *inode,
 	bd->queue = rq;
 
 	bsg_set_block(bd, file);
-	bsg_set_cmd_filter(bd, file);
 
 	atomic_set(&bd->ref_count, 1);
 	mutex_lock(&bsg_mutex);
@@ -943,7 +921,7 @@ static long bsg_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		if (copy_from_user(&hdr, uarg, sizeof(hdr)))
 			return -EFAULT;
 
-		rq = bsg_map_hdr(bd, &hdr);
+		rq = bsg_map_hdr(bd, &hdr, file->f_mode & FMODE_WRITE);
 		if (IS_ERR(rq))
 			return PTR_ERR(rq);
 
diff --git a/block/cmd-filter.c b/block/cmd-filter.c
index eec4404fd35..c705c33361a 100644
--- a/block/cmd-filter.c
+++ b/block/cmd-filter.c
@@ -27,8 +27,8 @@
 #include <scsi/scsi.h>
 #include <linux/cdrom.h>
 
-int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
-				  unsigned char *cmd, mode_t *f_mode)
+int blk_verify_command(struct blk_scsi_cmd_filter *filter,
+		       unsigned char *cmd, int has_write_perm)
 {
 	/* root can do any command. */
 	if (capable(CAP_SYS_RAWIO))
@@ -43,30 +43,11 @@ int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
 		return 0;
 
 	/* Write-safe commands require a writable open */
-	if (test_bit(cmd[0], filter->write_ok) && (*f_mode & FMODE_WRITE))
+	if (test_bit(cmd[0], filter->write_ok) && has_write_perm)
 		return 0;
 
 	return -EPERM;
 }
-EXPORT_SYMBOL(blk_cmd_filter_verify_command);
-
-int blk_verify_command(struct file *file, unsigned char *cmd)
-{
-	struct gendisk *disk;
-	struct inode *inode;
-
-	if (!file)
-		return -EINVAL;
-
-	inode = file->f_dentry->d_inode;
-	if (!inode)
-		return -EINVAL;
-
-	disk = inode->i_bdev->bd_disk;
-
-	return blk_cmd_filter_verify_command(&disk->cmd_filter,
-						 cmd, &file->f_mode);
-}
 EXPORT_SYMBOL(blk_verify_command);
 
 /* and now, the sysfs stuff */
@@ -219,114 +200,27 @@ static struct kobj_type rcf_ktype = {
 	.default_attrs = default_attrs,
 };
 
-#ifndef MAINTENANCE_IN_CMD
-#define MAINTENANCE_IN_CMD 0xa3
-#endif
-
-static void rcf_set_defaults(struct blk_scsi_cmd_filter *filter)
-{
-	/* Basic read-only commands */
-	__set_bit(TEST_UNIT_READY, filter->read_ok);
-	__set_bit(REQUEST_SENSE, filter->read_ok);
-	__set_bit(READ_6, filter->read_ok);
-	__set_bit(READ_10, filter->read_ok);
-	__set_bit(READ_12, filter->read_ok);
-	__set_bit(READ_16, filter->read_ok);
-	__set_bit(READ_BUFFER, filter->read_ok);
-	__set_bit(READ_DEFECT_DATA, filter->read_ok);
-	__set_bit(READ_CAPACITY, filter->read_ok);
-	__set_bit(READ_LONG, filter->read_ok);
-	__set_bit(INQUIRY, filter->read_ok);
-	__set_bit(MODE_SENSE, filter->read_ok);
-	__set_bit(MODE_SENSE_10, filter->read_ok);
-	__set_bit(LOG_SENSE, filter->read_ok);
-	__set_bit(START_STOP, filter->read_ok);
-	__set_bit(GPCMD_VERIFY_10, filter->read_ok);
-	__set_bit(VERIFY_16, filter->read_ok);
-	__set_bit(REPORT_LUNS, filter->read_ok);
-	__set_bit(SERVICE_ACTION_IN, filter->read_ok);
-	__set_bit(RECEIVE_DIAGNOSTIC, filter->read_ok);
-	__set_bit(MAINTENANCE_IN_CMD, filter->read_ok);
-	__set_bit(GPCMD_READ_BUFFER_CAPACITY, filter->read_ok);
-
-	/* Audio CD commands */
-	__set_bit(GPCMD_PLAY_CD, filter->read_ok);
-	__set_bit(GPCMD_PLAY_AUDIO_10, filter->read_ok);
-	__set_bit(GPCMD_PLAY_AUDIO_MSF, filter->read_ok);
-	__set_bit(GPCMD_PLAY_AUDIO_TI, filter->read_ok);
-	__set_bit(GPCMD_PAUSE_RESUME, filter->read_ok);
-
-	/* CD/DVD data reading */
-	__set_bit(GPCMD_READ_CD, filter->read_ok);
-	__set_bit(GPCMD_READ_CD_MSF, filter->read_ok);
-	__set_bit(GPCMD_READ_DISC_INFO, filter->read_ok);
-	__set_bit(GPCMD_READ_CDVD_CAPACITY, filter->read_ok);
-	__set_bit(GPCMD_READ_DVD_STRUCTURE, filter->read_ok);
-	__set_bit(GPCMD_READ_HEADER, filter->read_ok);
-	__set_bit(GPCMD_READ_TRACK_RZONE_INFO, filter->read_ok);
-	__set_bit(GPCMD_READ_SUBCHANNEL, filter->read_ok);
-	__set_bit(GPCMD_READ_TOC_PMA_ATIP, filter->read_ok);
-	__set_bit(GPCMD_REPORT_KEY, filter->read_ok);
-	__set_bit(GPCMD_SCAN, filter->read_ok);
-	__set_bit(GPCMD_GET_CONFIGURATION, filter->read_ok);
-	__set_bit(GPCMD_READ_FORMAT_CAPACITIES, filter->read_ok);
-	__set_bit(GPCMD_GET_EVENT_STATUS_NOTIFICATION, filter->read_ok);
-	__set_bit(GPCMD_GET_PERFORMANCE, filter->read_ok);
-	__set_bit(GPCMD_SEEK, filter->read_ok);
-	__set_bit(GPCMD_STOP_PLAY_SCAN, filter->read_ok);
-
-	/* Basic writing commands */
-	__set_bit(WRITE_6, filter->write_ok);
-	__set_bit(WRITE_10, filter->write_ok);
-	__set_bit(WRITE_VERIFY, filter->write_ok);
-	__set_bit(WRITE_12, filter->write_ok);
-	__set_bit(WRITE_VERIFY_12, filter->write_ok);
-	__set_bit(WRITE_16, filter->write_ok);
-	__set_bit(WRITE_LONG, filter->write_ok);
-	__set_bit(WRITE_LONG_2, filter->write_ok);
-	__set_bit(ERASE, filter->write_ok);
-	__set_bit(GPCMD_MODE_SELECT_10, filter->write_ok);
-	__set_bit(MODE_SELECT, filter->write_ok);
-	__set_bit(LOG_SELECT, filter->write_ok);
-	__set_bit(GPCMD_BLANK, filter->write_ok);
-	__set_bit(GPCMD_CLOSE_TRACK, filter->write_ok);
-	__set_bit(GPCMD_FLUSH_CACHE, filter->write_ok);
-	__set_bit(GPCMD_FORMAT_UNIT, filter->write_ok);
-	__set_bit(GPCMD_REPAIR_RZONE_TRACK, filter->write_ok);
-	__set_bit(GPCMD_RESERVE_RZONE_TRACK, filter->write_ok);
-	__set_bit(GPCMD_SEND_DVD_STRUCTURE, filter->write_ok);
-	__set_bit(GPCMD_SEND_EVENT, filter->write_ok);
-	__set_bit(GPCMD_SEND_KEY, filter->write_ok);
-	__set_bit(GPCMD_SEND_OPC, filter->write_ok);
-	__set_bit(GPCMD_SEND_CUE_SHEET, filter->write_ok);
-	__set_bit(GPCMD_SET_SPEED, filter->write_ok);
-	__set_bit(GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, filter->write_ok);
-	__set_bit(GPCMD_LOAD_UNLOAD, filter->write_ok);
-	__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
-}
-
 int blk_register_filter(struct gendisk *disk)
 {
 	int ret;
-	struct blk_scsi_cmd_filter *filter = &disk->cmd_filter;
+	struct blk_scsi_cmd_filter *filter = &disk->queue->cmd_filter;
 	struct kobject *parent = kobject_get(disk->holder_dir->parent);
 
 	if (!parent)
 		return -ENODEV;
 
 	ret = kobject_init_and_add(&filter->kobj, &rcf_ktype, parent,
-				 "%s", "cmd_filter");
+				   "%s", "cmd_filter");
 
 	if (ret < 0)
 		return ret;
 
-	rcf_set_defaults(filter);
 	return 0;
 }
 
 void blk_unregister_filter(struct gendisk *disk)
 {
-	struct blk_scsi_cmd_filter *filter = &disk->cmd_filter;
+	struct blk_scsi_cmd_filter *filter = &disk->queue->cmd_filter;
 
 	kobject_put(&filter->kobj);
 	kobject_put(disk->holder_dir->parent);
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index 12a5182173f..d01ef5ee427 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -105,12 +105,96 @@ static int sg_emulated_host(struct request_queue *q, int __user *p)
 	return put_user(1, p);
 }
 
+void blk_set_cmd_filter_defaults(struct blk_scsi_cmd_filter *filter)
+{
+	/* Basic read-only commands */
+	__set_bit(TEST_UNIT_READY, filter->read_ok);
+	__set_bit(REQUEST_SENSE, filter->read_ok);
+	__set_bit(READ_6, filter->read_ok);
+	__set_bit(READ_10, filter->read_ok);
+	__set_bit(READ_12, filter->read_ok);
+	__set_bit(READ_16, filter->read_ok);
+	__set_bit(READ_BUFFER, filter->read_ok);
+	__set_bit(READ_DEFECT_DATA, filter->read_ok);
+	__set_bit(READ_CAPACITY, filter->read_ok);
+	__set_bit(READ_LONG, filter->read_ok);
+	__set_bit(INQUIRY, filter->read_ok);
+	__set_bit(MODE_SENSE, filter->read_ok);
+	__set_bit(MODE_SENSE_10, filter->read_ok);
+	__set_bit(LOG_SENSE, filter->read_ok);
+	__set_bit(START_STOP, filter->read_ok);
+	__set_bit(GPCMD_VERIFY_10, filter->read_ok);
+	__set_bit(VERIFY_16, filter->read_ok);
+	__set_bit(REPORT_LUNS, filter->read_ok);
+	__set_bit(SERVICE_ACTION_IN, filter->read_ok);
+	__set_bit(RECEIVE_DIAGNOSTIC, filter->read_ok);
+	__set_bit(MAINTENANCE_IN, filter->read_ok);
+	__set_bit(GPCMD_READ_BUFFER_CAPACITY, filter->read_ok);
+
+	/* Audio CD commands */
+	__set_bit(GPCMD_PLAY_CD, filter->read_ok);
+	__set_bit(GPCMD_PLAY_AUDIO_10, filter->read_ok);
+	__set_bit(GPCMD_PLAY_AUDIO_MSF, filter->read_ok);
+	__set_bit(GPCMD_PLAY_AUDIO_TI, filter->read_ok);
+	__set_bit(GPCMD_PAUSE_RESUME, filter->read_ok);
+
+	/* CD/DVD data reading */
+	__set_bit(GPCMD_READ_CD, filter->read_ok);
+	__set_bit(GPCMD_READ_CD_MSF, filter->read_ok);
+	__set_bit(GPCMD_READ_DISC_INFO, filter->read_ok);
+	__set_bit(GPCMD_READ_CDVD_CAPACITY, filter->read_ok);
+	__set_bit(GPCMD_READ_DVD_STRUCTURE, filter->read_ok);
+	__set_bit(GPCMD_READ_HEADER, filter->read_ok);
+	__set_bit(GPCMD_READ_TRACK_RZONE_INFO, filter->read_ok);
+	__set_bit(GPCMD_READ_SUBCHANNEL, filter->read_ok);
+	__set_bit(GPCMD_READ_TOC_PMA_ATIP, filter->read_ok);
+	__set_bit(GPCMD_REPORT_KEY, filter->read_ok);
+	__set_bit(GPCMD_SCAN, filter->read_ok);
+	__set_bit(GPCMD_GET_CONFIGURATION, filter->read_ok);
+	__set_bit(GPCMD_READ_FORMAT_CAPACITIES, filter->read_ok);
+	__set_bit(GPCMD_GET_EVENT_STATUS_NOTIFICATION, filter->read_ok);
+	__set_bit(GPCMD_GET_PERFORMANCE, filter->read_ok);
+	__set_bit(GPCMD_SEEK, filter->read_ok);
+	__set_bit(GPCMD_STOP_PLAY_SCAN, filter->read_ok);
+
+	/* Basic writing commands */
+	__set_bit(WRITE_6, filter->write_ok);
+	__set_bit(WRITE_10, filter->write_ok);
+	__set_bit(WRITE_VERIFY, filter->write_ok);
+	__set_bit(WRITE_12, filter->write_ok);
+	__set_bit(WRITE_VERIFY_12, filter->write_ok);
+	__set_bit(WRITE_16, filter->write_ok);
+	__set_bit(WRITE_LONG, filter->write_ok);
+	__set_bit(WRITE_LONG_2, filter->write_ok);
+	__set_bit(ERASE, filter->write_ok);
+	__set_bit(GPCMD_MODE_SELECT_10, filter->write_ok);
+	__set_bit(MODE_SELECT, filter->write_ok);
+	__set_bit(LOG_SELECT, filter->write_ok);
+	__set_bit(GPCMD_BLANK, filter->write_ok);
+	__set_bit(GPCMD_CLOSE_TRACK, filter->write_ok);
+	__set_bit(GPCMD_FLUSH_CACHE, filter->write_ok);
+	__set_bit(GPCMD_FORMAT_UNIT, filter->write_ok);
+	__set_bit(GPCMD_REPAIR_RZONE_TRACK, filter->write_ok);
+	__set_bit(GPCMD_RESERVE_RZONE_TRACK, filter->write_ok);
+	__set_bit(GPCMD_SEND_DVD_STRUCTURE, filter->write_ok);
+	__set_bit(GPCMD_SEND_EVENT, filter->write_ok);
+	__set_bit(GPCMD_SEND_KEY, filter->write_ok);
+	__set_bit(GPCMD_SEND_OPC, filter->write_ok);
+	__set_bit(GPCMD_SEND_CUE_SHEET, filter->write_ok);
+	__set_bit(GPCMD_SET_SPEED, filter->write_ok);
+	__set_bit(GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, filter->write_ok);
+	__set_bit(GPCMD_LOAD_UNLOAD, filter->write_ok);
+	__set_bit(GPCMD_SET_STREAMING, filter->write_ok);
+}
+EXPORT_SYMBOL_GPL(blk_set_cmd_filter_defaults);
+
 static int blk_fill_sghdr_rq(struct request_queue *q, struct request *rq,
 			     struct sg_io_hdr *hdr, struct file *file)
 {
 	if (copy_from_user(rq->cmd, hdr->cmdp, hdr->cmd_len))
 		return -EFAULT;
-	if (blk_verify_command(file, rq->cmd))
+	if (blk_verify_command(&q->cmd_filter, rq->cmd,
+			       file->f_mode & FMODE_WRITE))
 		return -EPERM;
 
 	/*
@@ -298,7 +382,7 @@ int sg_scsi_ioctl(struct file *file, struct request_queue *q,
 		  struct gendisk *disk, struct scsi_ioctl_command __user *sic)
 {
 	struct request *rq;
-	int err;
+	int err, write_perm = 0;
 	unsigned int in_len, out_len, bytes, opcode, cmdlen;
 	char *buffer = NULL, sense[SCSI_SENSE_BUFFERSIZE];
 
@@ -340,7 +424,11 @@ int sg_scsi_ioctl(struct file *file, struct request_queue *q,
 	if (in_len && copy_from_user(buffer, sic->data + cmdlen, in_len))
 		goto error;
 
-	err = blk_verify_command(file, rq->cmd);
+	/* scsi_ioctl passes NULL */
+	if (file && (file->f_mode & FMODE_WRITE))
+		write_perm = 1;
+
+	err = blk_verify_command(&q->cmd_filter, rq->cmd, write_perm);
 	if (err)
 		goto error;
 
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 3d36270a8b4..9d28b9f74d9 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -641,6 +641,7 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
 	unsigned char cmnd[MAX_COMMAND_SIZE];
 	int timeout;
 	unsigned long ul_timeout;
+	struct request_queue *q;
 
 	if (count < SZ_SG_IO_HDR)
 		return -EINVAL;
@@ -689,7 +690,9 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
 		sg_remove_request(sfp, srp);
 		return -EFAULT;
 	}
-	if (read_only && !blk_verify_command(file, cmnd)) {
+	q = sfp->parentdp->device->request_queue;
+	if (read_only && blk_verify_command(&q->cmd_filter, cmnd,
+					    file->f_mode & FMODE_WRITE)) {
 		sg_remove_request(sfp, srp);
 		return -EPERM;
 	}
@@ -793,6 +796,7 @@ sg_ioctl(struct inode *inode, struct file *filp,
 
 	if ((!(sfp = (Sg_fd *) filp->private_data)) || (!(sdp = sfp->parentdp)))
 		return -ENXIO;
+
 	SCSI_LOG_TIMEOUT(3, printk("sg_ioctl: %s, cmd=0x%x\n",
 				   sdp->disk->disk_name, (int) cmd_in));
 	read_only = (O_RDWR != (filp->f_flags & O_ACCMODE));
@@ -1057,11 +1061,14 @@ sg_ioctl(struct inode *inode, struct file *filp,
 			return -ENODEV;
 		if (read_only) {
 			unsigned char opcode = WRITE_6;
+			struct request_queue *q = sdp->device->request_queue;
 			Scsi_Ioctl_Command __user *siocp = p;
 
 			if (copy_from_user(&opcode, siocp->data, 1))
 				return -EFAULT;
-			if (!blk_verify_command(filp, &opcode))
+			if (blk_verify_command(&q->cmd_filter,
+					       &opcode,
+					       filp->f_mode & FMODE_WRITE))
 				return -EPERM;
 		}
 		return sg_scsi_ioctl(filp, sdp->device->request_queue, NULL, p);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index e61f22be4d0..d2d34e2774b 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -280,6 +280,15 @@ struct blk_queue_tag {
 	atomic_t refcnt;		/* map can be shared */
 };
 
+#define BLK_SCSI_MAX_CMDS	(256)
+#define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
+
+struct blk_scsi_cmd_filter {
+	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
+	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
+	struct kobject kobj;
+};
+
 struct request_queue
 {
 	/*
@@ -398,6 +407,7 @@ struct request_queue
 #if defined(CONFIG_BLK_DEV_BSG)
 	struct bsg_class_device bsg_dev;
 #endif
+	struct blk_scsi_cmd_filter cmd_filter;
 };
 
 #define QUEUE_FLAG_CLUSTER	0	/* cluster several segments into 1 */
@@ -833,11 +843,11 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *);
 /*
 * command filter functions
 */
-extern int blk_verify_command(struct file *file, unsigned char *cmd);
-extern int blk_cmd_filter_verify_command(struct blk_scsi_cmd_filter *filter,
-					 unsigned char *cmd, mode_t *f_mode);
+extern int blk_verify_command(struct blk_scsi_cmd_filter *filter,
+			      unsigned char *cmd, int has_write_perm);
 extern int blk_register_filter(struct gendisk *disk);
 extern void blk_unregister_filter(struct gendisk *disk);
+extern void blk_set_cmd_filter_defaults(struct blk_scsi_cmd_filter *filter);
 
 #define MAX_PHYS_SEGMENTS 128
 #define MAX_HW_SEGMENTS 128
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 118216f1bd3..be4f5e5bfe0 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -110,15 +110,6 @@ struct hd_struct {
 #define GENHD_FL_SUPPRESS_PARTITION_INFO	32
 #define GENHD_FL_FAIL				64
 
-#define BLK_SCSI_MAX_CMDS	(256)
-#define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
-
-struct blk_scsi_cmd_filter {
-	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
-	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
-	struct kobject kobj;
-};
-
 struct gendisk {
 	int major;			/* major number of driver */
 	int first_minor;
@@ -128,7 +119,6 @@ struct gendisk {
 	struct hd_struct **part;	/* [indexed by minor] */
 	struct block_device_operations *fops;
 	struct request_queue *queue;
-	struct blk_scsi_cmd_filter cmd_filter;
 	void *private_data;
 	sector_t capacity;
 
-- 
GitLab


From 14e507b852e7dcea142b98757181bfa785cb4c05 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 26 Jul 2008 18:03:24 +0900
Subject: [PATCH 477/869] sg: restore command permission for TYPE_SCANNER

sg allowed any command for TYPE_SCANNER. The cmd_filter patchset
doesn't. We can't change sg's permission since it might break the
existing software.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 drivers/scsi/sg.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 9d28b9f74d9..661f9f21650 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -217,6 +217,18 @@ static int sg_last_dev(void);
 #define SZ_SG_IOVEC sizeof(sg_iovec_t)
 #define SZ_SG_REQ_INFO sizeof(sg_req_info_t)
 
+static int sg_allow_access(struct file *filp, unsigned char *cmd)
+{
+	struct sg_fd *sfp = (struct sg_fd *)filp->private_data;
+	struct request_queue *q = sfp->parentdp->device->request_queue;
+
+	if (sfp->parentdp->device->type == TYPE_SCANNER)
+		return 0;
+
+	return blk_verify_command(&q->cmd_filter,
+				  cmd, filp->f_mode & FMODE_WRITE);
+}
+
 static int
 sg_open(struct inode *inode, struct file *filp)
 {
@@ -641,7 +653,6 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
 	unsigned char cmnd[MAX_COMMAND_SIZE];
 	int timeout;
 	unsigned long ul_timeout;
-	struct request_queue *q;
 
 	if (count < SZ_SG_IO_HDR)
 		return -EINVAL;
@@ -690,9 +701,7 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
 		sg_remove_request(sfp, srp);
 		return -EFAULT;
 	}
-	q = sfp->parentdp->device->request_queue;
-	if (read_only && blk_verify_command(&q->cmd_filter, cmnd,
-					    file->f_mode & FMODE_WRITE)) {
+	if (read_only && sg_allow_access(file, cmnd)) {
 		sg_remove_request(sfp, srp);
 		return -EPERM;
 	}
@@ -1061,14 +1070,11 @@ sg_ioctl(struct inode *inode, struct file *filp,
 			return -ENODEV;
 		if (read_only) {
 			unsigned char opcode = WRITE_6;
-			struct request_queue *q = sdp->device->request_queue;
 			Scsi_Ioctl_Command __user *siocp = p;
 
 			if (copy_from_user(&opcode, siocp->data, 1))
 				return -EFAULT;
-			if (blk_verify_command(&q->cmd_filter,
-					       &opcode,
-					       filp->f_mode & FMODE_WRITE))
+			if (sg_allow_access(filp, &opcode))
 				return -EPERM;
 		}
 		return sg_scsi_ioctl(filp, sdp->device->request_queue, NULL, p);
-- 
GitLab


From 4beab5c623fef4622f9a8593f85760ff10b5a3f7 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Sat, 26 Jul 2008 18:03:25 +0900
Subject: [PATCH 478/869] block: rename blk_scsi_cmd_filter to blk_cmd_filter

Technically, the cmd_filter would be applied to other protocols though
it's unlikely to happen. Putting SCSI stuff to request_queue is kinda
layer violation. So let's rename it.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cmd-filter.c     | 30 +++++++++++++++---------------
 block/scsi_ioctl.c     |  2 +-
 include/linux/blkdev.h |  8 ++++----
 3 files changed, 20 insertions(+), 20 deletions(-)

diff --git a/block/cmd-filter.c b/block/cmd-filter.c
index c705c33361a..0e3a123944a 100644
--- a/block/cmd-filter.c
+++ b/block/cmd-filter.c
@@ -27,7 +27,7 @@
 #include <scsi/scsi.h>
 #include <linux/cdrom.h>
 
-int blk_verify_command(struct blk_scsi_cmd_filter *filter,
+int blk_verify_command(struct blk_cmd_filter *filter,
 		       unsigned char *cmd, int has_write_perm)
 {
 	/* root can do any command. */
@@ -51,7 +51,7 @@ int blk_verify_command(struct blk_scsi_cmd_filter *filter,
 EXPORT_SYMBOL(blk_verify_command);
 
 /* and now, the sysfs stuff */
-static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page,
+static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
 			     int rw)
 {
 	char *npage = page;
@@ -78,18 +78,18 @@ static ssize_t rcf_cmds_show(struct blk_scsi_cmd_filter *filter, char *page,
 	return npage - page;
 }
 
-static ssize_t rcf_readcmds_show(struct blk_scsi_cmd_filter *filter, char *page)
+static ssize_t rcf_readcmds_show(struct blk_cmd_filter *filter, char *page)
 {
 	return rcf_cmds_show(filter, page, READ);
 }
 
-static ssize_t rcf_writecmds_show(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter,
 				 char *page)
 {
 	return rcf_cmds_show(filter, page, WRITE);
 }
 
-static ssize_t rcf_cmds_store(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter,
 			      const char *page, size_t count, int rw)
 {
 	ssize_t ret = 0;
@@ -122,13 +122,13 @@ static ssize_t rcf_cmds_store(struct blk_scsi_cmd_filter *filter,
 	return count;
 }
 
-static ssize_t rcf_readcmds_store(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_readcmds_store(struct blk_cmd_filter *filter,
 				  const char *page, size_t count)
 {
 	return rcf_cmds_store(filter, page, count, READ);
 }
 
-static ssize_t rcf_writecmds_store(struct blk_scsi_cmd_filter *filter,
+static ssize_t rcf_writecmds_store(struct blk_cmd_filter *filter,
 				   const char *page, size_t count)
 {
 	return rcf_cmds_store(filter, page, count, WRITE);
@@ -136,8 +136,8 @@ static ssize_t rcf_writecmds_store(struct blk_scsi_cmd_filter *filter,
 
 struct rcf_sysfs_entry {
 	struct attribute attr;
-	ssize_t (*show)(struct blk_scsi_cmd_filter *, char *);
-	ssize_t (*store)(struct blk_scsi_cmd_filter *, const char *, size_t);
+	ssize_t (*show)(struct blk_cmd_filter *, char *);
+	ssize_t (*store)(struct blk_cmd_filter *, const char *, size_t);
 };
 
 static struct rcf_sysfs_entry rcf_readcmds_entry = {
@@ -164,9 +164,9 @@ static ssize_t
 rcf_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
 {
 	struct rcf_sysfs_entry *entry = to_rcf(attr);
-	struct blk_scsi_cmd_filter *filter;
+	struct blk_cmd_filter *filter;
 
-	filter = container_of(kobj, struct blk_scsi_cmd_filter, kobj);
+	filter = container_of(kobj, struct blk_cmd_filter, kobj);
 	if (entry->show)
 		return entry->show(filter, page);
 
@@ -178,7 +178,7 @@ rcf_attr_store(struct kobject *kobj, struct attribute *attr,
 			const char *page, size_t length)
 {
 	struct rcf_sysfs_entry *entry = to_rcf(attr);
-	struct blk_scsi_cmd_filter *filter;
+	struct blk_cmd_filter *filter;
 
 	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
@@ -186,7 +186,7 @@ rcf_attr_store(struct kobject *kobj, struct attribute *attr,
 	if (!entry->store)
 		return -EINVAL;
 
-	filter = container_of(kobj, struct blk_scsi_cmd_filter, kobj);
+	filter = container_of(kobj, struct blk_cmd_filter, kobj);
 	return entry->store(filter, page, length);
 }
 
@@ -203,7 +203,7 @@ static struct kobj_type rcf_ktype = {
 int blk_register_filter(struct gendisk *disk)
 {
 	int ret;
-	struct blk_scsi_cmd_filter *filter = &disk->queue->cmd_filter;
+	struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
 	struct kobject *parent = kobject_get(disk->holder_dir->parent);
 
 	if (!parent)
@@ -220,7 +220,7 @@ int blk_register_filter(struct gendisk *disk)
 
 void blk_unregister_filter(struct gendisk *disk)
 {
-	struct blk_scsi_cmd_filter *filter = &disk->queue->cmd_filter;
+	struct blk_cmd_filter *filter = &disk->queue->cmd_filter;
 
 	kobject_put(&filter->kobj);
 	kobject_put(disk->holder_dir->parent);
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index d01ef5ee427..ec4b7f23462 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -105,7 +105,7 @@ static int sg_emulated_host(struct request_queue *q, int __user *p)
 	return put_user(1, p);
 }
 
-void blk_set_cmd_filter_defaults(struct blk_scsi_cmd_filter *filter)
+void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter)
 {
 	/* Basic read-only commands */
 	__set_bit(TEST_UNIT_READY, filter->read_ok);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index d2d34e2774b..ab247d589ad 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -283,7 +283,7 @@ struct blk_queue_tag {
 #define BLK_SCSI_MAX_CMDS	(256)
 #define BLK_SCSI_CMD_PER_LONG	(BLK_SCSI_MAX_CMDS / (sizeof(long) * 8))
 
-struct blk_scsi_cmd_filter {
+struct blk_cmd_filter {
 	unsigned long read_ok[BLK_SCSI_CMD_PER_LONG];
 	unsigned long write_ok[BLK_SCSI_CMD_PER_LONG];
 	struct kobject kobj;
@@ -407,7 +407,7 @@ struct request_queue
 #if defined(CONFIG_BLK_DEV_BSG)
 	struct bsg_class_device bsg_dev;
 #endif
-	struct blk_scsi_cmd_filter cmd_filter;
+	struct blk_cmd_filter cmd_filter;
 };
 
 #define QUEUE_FLAG_CLUSTER	0	/* cluster several segments into 1 */
@@ -843,11 +843,11 @@ extern int blkdev_issue_flush(struct block_device *, sector_t *);
 /*
 * command filter functions
 */
-extern int blk_verify_command(struct blk_scsi_cmd_filter *filter,
+extern int blk_verify_command(struct blk_cmd_filter *filter,
 			      unsigned char *cmd, int has_write_perm);
 extern int blk_register_filter(struct gendisk *disk);
 extern void blk_unregister_filter(struct gendisk *disk);
-extern void blk_set_cmd_filter_defaults(struct blk_scsi_cmd_filter *filter);
+extern void blk_set_cmd_filter_defaults(struct blk_cmd_filter *filter);
 
 #define MAX_PHYS_SEGMENTS 128
 #define MAX_HW_SEGMENTS 128
-- 
GitLab


From a4a778971b9cfcbedb8648ba502d801f7db04c47 Mon Sep 17 00:00:00 2001
From: Adel Gadllah <adel.gadllah@gmail.com>
Date: Sat, 16 Aug 2008 14:21:06 +0900
Subject: [PATCH 479/869] block: clean up cmdfilter sysfs interface

This patch changes the interface of the cmd filter to use a +/-
notation like:

echo -- +0x02 +0x03 -0x08

If neither + or - is given it defaults to + (allow command).

Note: The interface was added in 2.6.17-rc1 and is unused and
undocumented so far so it's safe to change it.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: jens.axboe@oracle.com
Cc: James.Bottomley@hansenpartnership.com
Cc: dan.j.williams@intel.com
Cc: pjones@redhat.com
Cc: viro@zeniv.linux.org.uk
Cc: dougg@torque.net
Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cmd-filter.c | 54 +++++++++++++++++++++++++---------------------
 1 file changed, 30 insertions(+), 24 deletions(-)

diff --git a/block/cmd-filter.c b/block/cmd-filter.c
index 0e3a123944a..1d4026206ac 100644
--- a/block/cmd-filter.c
+++ b/block/cmd-filter.c
@@ -20,7 +20,6 @@
 #include <linux/list.h>
 #include <linux/genhd.h>
 #include <linux/spinlock.h>
-#include <linux/parser.h>
 #include <linux/capability.h>
 #include <linux/bitops.h>
 
@@ -65,8 +64,7 @@ static ssize_t rcf_cmds_show(struct blk_cmd_filter *filter, char *page,
 
 	for (i = 0; i < BLK_SCSI_MAX_CMDS; i++) {
 		if (test_bit(i, okbits)) {
-			sprintf(npage, "%02x", i);
-			npage += 2;
+			npage += sprintf(npage, "0x%02x", i);
 			if (i < BLK_SCSI_MAX_CMDS - 1)
 				sprintf(npage++, " ");
 		}
@@ -92,33 +90,41 @@ static ssize_t rcf_writecmds_show(struct blk_cmd_filter *filter,
 static ssize_t rcf_cmds_store(struct blk_cmd_filter *filter,
 			      const char *page, size_t count, int rw)
 {
-	ssize_t ret = 0;
 	unsigned long okbits[BLK_SCSI_CMD_PER_LONG], *target_okbits;
-	int cmd, status, len;
-	substring_t ss;
-
-	memset(&okbits, 0, sizeof(okbits));
-
-	for (len = strlen(page); len > 0; len -= 3) {
-		if (len < 2)
-			break;
-		ss.from = (char *) page + ret;
-		ss.to = (char *) page + ret + 2;
-		ret += 3;
-		status = match_hex(&ss, &cmd);
+	int cmd, set;
+	char *p, *status;
+
+	if (rw == READ) {
+		memcpy(&okbits, filter->read_ok, sizeof(okbits));
+		target_okbits = filter->read_ok;
+	} else {
+		memcpy(&okbits, filter->write_ok, sizeof(okbits));
+		target_okbits = filter->write_ok;
+	}
+
+	while ((p = strsep((char **)&page, " ")) != NULL) {
+		set = 1;
+
+		if (p[0] == '+') {
+			p++;
+		} else if (p[0] == '-') {
+			set = 0;
+			p++;
+		}
+
+		cmd = simple_strtol(p, &status, 16);
+
 		/* either of these cases means invalid input, so do nothing. */
-		if (status || cmd >= BLK_SCSI_MAX_CMDS)
+		if ((status == p) || cmd >= BLK_SCSI_MAX_CMDS)
 			return -EINVAL;
 
-		__set_bit(cmd, okbits);
+		if (set)
+			__set_bit(cmd, okbits);
+		else
+			__clear_bit(cmd, okbits);
 	}
 
-	if (rw == READ)
-		target_okbits = filter->read_ok;
-	else
-		target_okbits = filter->write_ok;
-
-	memmove(target_okbits, okbits, sizeof(okbits));
+	memcpy(target_okbits, okbits, sizeof(okbits));
 	return count;
 }
 
-- 
GitLab


From 48fd4f93a00eac844678629f2f00518e146ed30d Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Fri, 22 Aug 2008 10:00:36 +0200
Subject: [PATCH 480/869] block: submit_bh() inadvertently discards barrier
 flag on a sync write

Reported by Milan Broz <mbroz@redhat.com>, commit 18ce3751 inadvertently
made submit_bh() discard the barrier bit for a WRITE_SYNC request. Fix
that up.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/buffer.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/fs/buffer.c b/fs/buffer.c
index 38653e36e22..ac78d4c19b3 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2926,14 +2926,17 @@ int submit_bh(int rw, struct buffer_head * bh)
 	BUG_ON(!buffer_mapped(bh));
 	BUG_ON(!bh->b_end_io);
 
-	if (buffer_ordered(bh) && (rw == WRITE))
-		rw = WRITE_BARRIER;
+	/*
+	 * Mask in barrier bit for a write (could be either a WRITE or a
+	 * WRITE_SYNC
+	 */
+	if (buffer_ordered(bh) && (rw & WRITE))
+		rw |= WRITE_BARRIER;
 
 	/*
-	 * Only clear out a write error when rewriting, should this
-	 * include WRITE_SYNC as well?
+	 * Only clear out a write error when rewriting
 	 */
-	if (test_set_buffer_req(bh) && (rw == WRITE || rw == WRITE_BARRIER))
+	if (test_set_buffer_req(bh) && (rw & WRITE))
 		clear_buffer_write_io_error(bh);
 
 	/*
-- 
GitLab


From 76029ff37f31dad64641489c610d98955217bb68 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 25 Aug 2008 20:36:08 +0200
Subject: [PATCH 481/869] bio: fix bio_copy_kern() handling of bio->bv_len

The commit 68154e90c9d1492d570671ae181d9a8f8530da55 introduced
bio_copy_kern() to add bounce support to blk_rq_map_kern.

bio_copy_kern() uses bio->bv_len to copy data for READ commands after
the completion but it doesn't work with a request that partially
completed. SCSI always completes a PC request as a whole but seems
some don't.

This patch fixes bio_copy_kern to handle the above case. As
bio_copy_user does, bio_copy_kern uses struct bio_map_data to store
struct bio_vec.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reported-by: Nix <nix@esperi.org.uk>
Tested-by: Nix <nix@esperi.org.uk>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/bio.c | 38 ++++++++++++++++++++++++++++----------
 1 file changed, 28 insertions(+), 10 deletions(-)

diff --git a/fs/bio.c b/fs/bio.c
index 8000e2fa16c..8b1f5ee6f83 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -469,20 +469,21 @@ static void bio_free_map_data(struct bio_map_data *bmd)
 	kfree(bmd);
 }
 
-static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count)
+static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
+					       gfp_t gfp_mask)
 {
-	struct bio_map_data *bmd = kmalloc(sizeof(*bmd), GFP_KERNEL);
+	struct bio_map_data *bmd = kmalloc(sizeof(*bmd), gfp_mask);
 
 	if (!bmd)
 		return NULL;
 
-	bmd->iovecs = kmalloc(sizeof(struct bio_vec) * nr_segs, GFP_KERNEL);
+	bmd->iovecs = kmalloc(sizeof(struct bio_vec) * nr_segs, gfp_mask);
 	if (!bmd->iovecs) {
 		kfree(bmd);
 		return NULL;
 	}
 
-	bmd->sgvecs = kmalloc(sizeof(struct sg_iovec) * iov_count, GFP_KERNEL);
+	bmd->sgvecs = kmalloc(sizeof(struct sg_iovec) * iov_count, gfp_mask);
 	if (bmd->sgvecs)
 		return bmd;
 
@@ -596,7 +597,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, struct sg_iovec *iov,
 		len += iov[i].iov_len;
 	}
 
-	bmd = bio_alloc_map_data(nr_pages, iov_count);
+	bmd = bio_alloc_map_data(nr_pages, iov_count, GFP_KERNEL);
 	if (!bmd)
 		return ERR_PTR(-ENOMEM);
 
@@ -942,19 +943,22 @@ static void bio_copy_kern_endio(struct bio *bio, int err)
 {
 	struct bio_vec *bvec;
 	const int read = bio_data_dir(bio) == READ;
-	char *p = bio->bi_private;
+	struct bio_map_data *bmd = bio->bi_private;
 	int i;
+	char *p = bmd->sgvecs[0].iov_base;
 
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		char *addr = page_address(bvec->bv_page);
+		int len = bmd->iovecs[i].bv_len;
 
 		if (read && !err)
-			memcpy(p, addr, bvec->bv_len);
+			memcpy(p, addr, len);
 
 		__free_page(bvec->bv_page);
-		p += bvec->bv_len;
+		p += len;
 	}
 
+	bio_free_map_data(bmd);
 	bio_put(bio);
 }
 
@@ -978,11 +982,21 @@ struct bio *bio_copy_kern(struct request_queue *q, void *data, unsigned int len,
 	const int nr_pages = end - start;
 	struct bio *bio;
 	struct bio_vec *bvec;
+	struct bio_map_data *bmd;
 	int i, ret;
+	struct sg_iovec iov;
+
+	iov.iov_base = data;
+	iov.iov_len = len;
+
+	bmd = bio_alloc_map_data(nr_pages, 1, gfp_mask);
+	if (!bmd)
+		return ERR_PTR(-ENOMEM);
 
+	ret = -ENOMEM;
 	bio = bio_alloc(gfp_mask, nr_pages);
 	if (!bio)
-		return ERR_PTR(-ENOMEM);
+		goto out_bmd;
 
 	while (len) {
 		struct page *page;
@@ -1016,14 +1030,18 @@ struct bio *bio_copy_kern(struct request_queue *q, void *data, unsigned int len,
 		}
 	}
 
-	bio->bi_private = data;
+	bio->bi_private = bmd;
 	bio->bi_end_io = bio_copy_kern_endio;
+
+	bio_set_map_data(bmd, bio, &iov, 1);
 	return bio;
 cleanup:
 	bio_for_each_segment(bvec, bio, i)
 		__free_page(bvec->bv_page);
 
 	bio_put(bio);
+out_bmd:
+	bio_free_map_data(bmd);
 
 	return ERR_PTR(ret);
 }
-- 
GitLab


From aefcc28a3a63ac33a298777aa50ba43641c75241 Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Mon, 25 Aug 2008 20:36:08 +0200
Subject: [PATCH 482/869] bio: fix __bio_copy_iov() handling of bio->bv_len

The commit c5dec1c3034f1ae3503efbf641ff3b0273b64797 introduced
__bio_copy_iov() to add bounce support to blk_rq_map_user_iov.

__bio_copy_iov() uses bio->bv_len to copy data for READ commands after
the completion but it doesn't work with a request that partially
completed. SCSI always completes a PC request as a whole but seems
some don't.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 fs/bio.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/fs/bio.c b/fs/bio.c
index 8b1f5ee6f83..3cba7ae34d7 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -492,8 +492,8 @@ static struct bio_map_data *bio_alloc_map_data(int nr_segs, int iov_count,
 	return NULL;
 }
 
-static int __bio_copy_iov(struct bio *bio, struct sg_iovec *iov, int iov_count,
-			  int uncopy)
+static int __bio_copy_iov(struct bio *bio, struct bio_vec *iovecs,
+			  struct sg_iovec *iov, int iov_count, int uncopy)
 {
 	int ret = 0, i;
 	struct bio_vec *bvec;
@@ -503,7 +503,7 @@ static int __bio_copy_iov(struct bio *bio, struct sg_iovec *iov, int iov_count,
 
 	__bio_for_each_segment(bvec, bio, i, 0) {
 		char *bv_addr = page_address(bvec->bv_page);
-		unsigned int bv_len = bvec->bv_len;
+		unsigned int bv_len = iovecs[i].bv_len;
 
 		while (bv_len && iov_idx < iov_count) {
 			unsigned int bytes;
@@ -555,7 +555,7 @@ int bio_uncopy_user(struct bio *bio)
 	struct bio_map_data *bmd = bio->bi_private;
 	int ret;
 
-	ret = __bio_copy_iov(bio, bmd->sgvecs, bmd->nr_sgvecs, 1);
+	ret = __bio_copy_iov(bio, bmd->iovecs, bmd->sgvecs, bmd->nr_sgvecs, 1);
 
 	bio_free_map_data(bmd);
 	bio_put(bio);
@@ -634,7 +634,7 @@ struct bio *bio_copy_user_iov(struct request_queue *q, struct sg_iovec *iov,
 	 * success
 	 */
 	if (!write_to_vm) {
-		ret = __bio_copy_iov(bio, iov, iov_count, 0);
+		ret = __bio_copy_iov(bio, bio->bi_io_vec, iov, iov_count, 0);
 		if (ret)
 			goto cleanup;
 	}
-- 
GitLab


From 0e3eb45e4fe901d92bf9eae103155a57517af32e Mon Sep 17 00:00:00 2001
From: Matthew Wilcox <matthew@wil.cx>
Date: Tue, 26 Aug 2008 09:02:28 +0200
Subject: [PATCH 483/869] block: remove unused ->busy part of the block queue
 tag map

It's not used for anything. On top of that, it's racy and can thus
trigger a faulty BUG_ON() in __blk_free_tags() on queue exit.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/blk-tag.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/block/blk-tag.c b/block/blk-tag.c
index 32667beb03e..ed5166fbc59 100644
--- a/block/blk-tag.c
+++ b/block/blk-tag.c
@@ -38,7 +38,8 @@ static int __blk_free_tags(struct blk_queue_tag *bqt)
 
 	retval = atomic_dec_and_test(&bqt->refcnt);
 	if (retval) {
-		BUG_ON(bqt->busy);
+		BUG_ON(find_first_bit(bqt->tag_map, bqt->max_depth) <
+							bqt->max_depth);
 
 		kfree(bqt->tag_index);
 		bqt->tag_index = NULL;
@@ -147,7 +148,6 @@ static struct blk_queue_tag *__blk_queue_init_tags(struct request_queue *q,
 	if (init_tag_map(q, tags, depth))
 		goto fail;
 
-	tags->busy = 0;
 	atomic_set(&tags->refcnt, 1);
 	return tags;
 fail:
@@ -313,7 +313,6 @@ void blk_queue_end_tag(struct request_queue *q, struct request *rq)
 	 * unlock memory barrier semantics.
 	 */
 	clear_bit_unlock(tag, bqt->tag_map);
-	bqt->busy--;
 }
 EXPORT_SYMBOL(blk_queue_end_tag);
 
@@ -368,7 +367,6 @@ int blk_queue_start_tag(struct request_queue *q, struct request *rq)
 	bqt->tag_index[tag] = rq;
 	blkdev_dequeue_request(rq);
 	list_add(&rq->queuelist, &q->tag_busy_list);
-	bqt->busy++;
 	return 0;
 }
 EXPORT_SYMBOL(blk_queue_start_tag);
-- 
GitLab


From 5168c47b4c294412f079dd3cc891e0276bb0479e Mon Sep 17 00:00:00 2001
From: Jens Axboe <jens.axboe@oracle.com>
Date: Tue, 26 Aug 2008 09:03:17 +0200
Subject: [PATCH 484/869] block: remove blk_queue_tag_depth() and
 blk_queue_tag_queue()

They are unused and ->busy doesn't exist anymore.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 include/linux/blkdev.h | 2 --
 1 file changed, 2 deletions(-)

diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index ab247d589ad..44710d7e7bf 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -817,8 +817,6 @@ extern void blk_put_queue(struct request_queue *);
 /*
  * tag stuff
  */
-#define blk_queue_tag_depth(q)		((q)->queue_tags->busy)
-#define blk_queue_tag_queue(q)		((q)->queue_tags->busy < (q)->queue_tags->max_depth)
 #define blk_rq_tagged(rq)		((rq)->cmd_flags & REQ_QUEUED)
 extern int blk_queue_start_tag(struct request_queue *, struct request *);
 extern struct request *blk_queue_find_tag(struct request_queue *, int);
-- 
GitLab


From 736783b8528bdce7f090dfae66f57411be40c5f8 Mon Sep 17 00:00:00 2001
From: Mike Frysinger <vapier.adi@gmail.com>
Date: Wed, 27 Aug 2008 11:47:57 +0800
Subject: [PATCH 485/869] Blackfin EMAC Driver: the BF526 also supports the
 MAC, so update things accordingly

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a5c141cecd4..4a11296a951 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -822,14 +822,14 @@ config ULTRA32
 	  will be called smc-ultra32.
 
 config BFIN_MAC
-	tristate "Blackfin 527/536/537 on-chip mac support"
-	depends on NET_ETHERNET && (BF527 || BF537 || BF536)
+	tristate "Blackfin on-chip MAC support"
+	depends on NET_ETHERNET && (BF526 || BF527 || BF536 || BF537)
 	select CRC32
 	select MII
 	select PHYLIB
 	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
 	help
-	  This is the driver for blackfin on-chip mac device. Say Y if you want it
+	  This is the driver for Blackfin on-chip mac device. Say Y if you want it
 	  compiled into the kernel. This driver is also available as a module
 	  ( = code which can be inserted in and removed from the running kernel
 	  whenever you want). The module will be called bfin_mac.
-- 
GitLab


From 3d01625a4f30ec9db8e964b7fde1f902f522e992 Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Tue, 26 Aug 2008 18:30:04 -0700
Subject: [PATCH 486/869] ixgbe: fix vlan filtering

VLAN filtering is broken, due to reading the incorrect register for
the VLAN filtering settings.  Fixed by reading/writing the correct
register.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/ixgbe/ixgbe_main.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 34bca16d48a..53f41b649f0 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1636,16 +1636,17 @@ static void ixgbe_set_multi(struct net_device *netdev)
 	struct ixgbe_hw *hw = &adapter->hw;
 	struct dev_mc_list *mc_ptr;
 	u8 *mta_list;
-	u32 fctrl;
+	u32 fctrl, vlnctrl;
 	int i;
 
 	/* Check for Promiscuous and All Multicast modes */
 
 	fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
 
 	if (netdev->flags & IFF_PROMISC) {
 		fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
-		fctrl &= ~IXGBE_VLNCTRL_VFE;
+		vlnctrl &= ~IXGBE_VLNCTRL_VFE;
 	} else {
 		if (netdev->flags & IFF_ALLMULTI) {
 			fctrl |= IXGBE_FCTRL_MPE;
@@ -1653,10 +1654,11 @@ static void ixgbe_set_multi(struct net_device *netdev)
 		} else {
 			fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
 		}
-		fctrl |= IXGBE_VLNCTRL_VFE;
+		vlnctrl |= IXGBE_VLNCTRL_VFE;
 	}
 
 	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+	IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
 
 	if (netdev->mc_count) {
 		mta_list = kcalloc(netdev->mc_count, ETH_ALEN, GFP_ATOMIC);
-- 
GitLab


From 0623807a18c4baa2effcdb298e8b31d90e3ef69f Mon Sep 17 00:00:00 2001
From: Brice Goglin <brice@myri.com>
Date: Tue, 26 Aug 2008 23:29:12 +0200
Subject: [PATCH 487/869] myri10ge: update version string to 1.4.3-1.358

Update myri10ge version string to 1.4.3-1.358.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/myri10ge/myri10ge.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 5d76cd09e24..f6847531bf9 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -76,7 +76,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.3.99-1.347"
+#define MYRI10GE_VERSION_STR "1.4.3-1.358"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
-- 
GitLab


From 666d9bbedfff7c2c37eab92e715641922dee6864 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Wed, 27 Aug 2008 02:12:52 -0700
Subject: [PATCH 488/869] pkt_sched: Fix dev_graft_qdisc() locking

During dev_graft_qdisc() dev is deactivated, so qdisc_root_lock()
returns wrong lock of noop_qdisc instead of qdisc_sleeping.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_api.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index e7fb9e0d21b..341d558b6e3 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -624,7 +624,7 @@ static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
 	struct Qdisc *oqdisc = dev_queue->qdisc_sleeping;
 	spinlock_t *root_lock;
 
-	root_lock = qdisc_root_lock(oqdisc);
+	root_lock = qdisc_lock(oqdisc);
 	spin_lock_bh(root_lock);
 
 	/* Prune old scheduler */
-- 
GitLab


From a866bbf6aacf95f849810079442a20be118ce905 Mon Sep 17 00:00:00 2001
From: Francois Romieu <romieu@fr.zoreil.com>
Date: Tue, 26 Aug 2008 21:56:06 +0200
Subject: [PATCH 489/869] r8169: balance pci_map / pci_unmap pair
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The leak hurts with swiotlb and jumbo frames.

Fix http://bugzilla.kernel.org/show_bug.cgi?id=9468.

Heavily hinted by Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Tested-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: Timothy J Fontaine <tjfontaine@atxconsulting.com>
Cc: Edward Hsu <edward_hsu@realtek.com.tw>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/r8169.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index a3e3895e503..0f6f9747d25 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2792,7 +2792,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev,
 					pkt_size, PCI_DMA_FROMDEVICE);
 				rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
 			} else {
-				pci_unmap_single(pdev, addr, pkt_size,
+				pci_unmap_single(pdev, addr, tp->rx_buf_sz,
 						 PCI_DMA_FROMDEVICE);
 				tp->Rx_skbuff[entry] = NULL;
 			}
-- 
GitLab


From 7a6ea550f2f7592742ac765e5a3b4b5d1461e0bd Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Tue, 26 Aug 2008 04:25:03 -0700
Subject: [PATCH 490/869] igb: force all queues to interrupt once every 2
 seconds

Set the EICS bit for each of the RX queues at least once every 2 seconds to
prevent the rx queues from stalling.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/igb/igb_main.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 8f66e15ec8d..465a810b670 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2290,7 +2290,9 @@ static void igb_watchdog_task(struct work_struct *work)
 	struct igb_ring *tx_ring = adapter->tx_ring;
 	struct e1000_mac_info *mac = &adapter->hw.mac;
 	u32 link;
+	u32 eics = 0;
 	s32 ret_val;
+	int i;
 
 	if ((netif_carrier_ok(netdev)) &&
 	    (rd32(E1000_STATUS) & E1000_STATUS_LU))
@@ -2392,7 +2394,13 @@ link_up:
 	}
 
 	/* Cause software interrupt to ensure rx ring is cleaned */
-	wr32(E1000_ICS, E1000_ICS_RXDMT0);
+	if (adapter->msix_entries) {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			eics |= adapter->rx_ring[i].eims_value;
+		wr32(E1000_EICS, eics);
+	} else {
+		wr32(E1000_ICS, E1000_ICS_RXDMT0);
+	}
 
 	/* Force detection of hung controller every watchdog period */
 	tx_ring->detect_tx_hung = true;
-- 
GitLab


From fe59de38c58d3eedc025be61ff3055a41776bbd4 Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Tue, 26 Aug 2008 04:25:05 -0700
Subject: [PATCH 491/869] igb: ethtool -d reads EICR which is incorrect as it
 is read on clear

Ethtool -d is reading the EICR and ICR registers which is currently
clearing these registers and masking off interrupts.  To prevent this we
read the EICS and ICS equivilents as they can be read without clearing or
masking.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/igb/igb_ethtool.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 11aee130995..3eb78a66f8b 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -373,13 +373,17 @@ static void igb_get_regs(struct net_device *netdev,
 	regs_buff[12] = rd32(E1000_EECD);
 
 	/* Interrupt */
-	regs_buff[13] = rd32(E1000_EICR);
+	/* Reading EICS for EICR because they read the
+	 * same but EICS does not clear on read */
+	regs_buff[13] = rd32(E1000_EICS);
 	regs_buff[14] = rd32(E1000_EICS);
 	regs_buff[15] = rd32(E1000_EIMS);
 	regs_buff[16] = rd32(E1000_EIMC);
 	regs_buff[17] = rd32(E1000_EIAC);
 	regs_buff[18] = rd32(E1000_EIAM);
-	regs_buff[19] = rd32(E1000_ICR);
+	/* Reading ICS for ICR because they read the
+	 * same but ICS does not clear on read */
+	regs_buff[19] = rd32(E1000_ICS);
 	regs_buff[20] = rd32(E1000_ICS);
 	regs_buff[21] = rd32(E1000_IMS);
 	regs_buff[22] = rd32(E1000_IMC);
-- 
GitLab


From 34a20e89739e9ac1cb89bdf430b694d2c946ebff Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Tue, 26 Aug 2008 04:25:13 -0700
Subject: [PATCH 492/869] igb: fix setting the number of tx queues

The real_num_tx_queues was not being set when in MSI-X only mode.  This patch
corrects that path so all interrupt types are correctly configured.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/igb/igb_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 465a810b670..e6eb13a303c 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -521,7 +521,7 @@ static void igb_set_interrupt_capability(struct igb_adapter *adapter)
 			      adapter->msix_entries,
 			      numvecs);
 	if (err == 0)
-		return;
+		goto out;
 
 	igb_reset_interrupt_capability(adapter);
 
@@ -531,7 +531,7 @@ msi_only:
 	adapter->num_tx_queues = 1;
 	if (!pci_enable_msi(adapter->pdev))
 		adapter->flags |= IGB_FLAG_HAS_MSI;
-
+out:
 	/* Notify the stack of the (possibly) reduced Tx Queue count. */
 	adapter->netdev->real_num_tx_queues = adapter->num_tx_queues;
 	return;
-- 
GitLab


From f4f62301c6f42127b7462274abfcbc278f84d59a Mon Sep 17 00:00:00 2001
From: Heiko Schocher <hs@denx.de>
Date: Mon, 25 Aug 2008 20:20:53 -0500
Subject: [PATCH 493/869] fs_enet: Fix SCC Ethernet on CPM2, and crash in
 fs_enet_rx_napi()

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 arch/powerpc/include/asm/cpm2.h    | 5 +++++
 drivers/net/fs_enet/fs_enet-main.c | 8 ++++++++
 drivers/net/fs_enet/mac-scc.c      | 8 +++++++-
 3 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h
index 2a6fa0183ac..0f5e8ff59a8 100644
--- a/arch/powerpc/include/asm/cpm2.h
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -337,6 +337,11 @@ typedef struct scc_param {
 	uint	scc_tcrc;	/* Internal */
 } sccp_t;
 
+/* Function code bits.
+*/
+#define SCC_EB	((u_char) 0x10)	/* Set big endian byte order */
+#define SCC_GBL	((u_char) 0x20) /* Snooping enabled */
+
 /* CPM Ethernet through SCC1.
  */
 typedef struct scc_enet {
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 9a51ec8293c..9d461825bf4 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -792,6 +792,10 @@ static int fs_enet_open(struct net_device *dev)
 	int r;
 	int err;
 
+	/* to initialize the fep->cur_rx,... */
+	/* not doing this, will cause a crash in fs_enet_rx_napi */
+	fs_init_bds(fep->ndev);
+
 	if (fep->fpi->use_napi)
 		napi_enable(&fep->napi);
 
@@ -1167,6 +1171,10 @@ static struct of_device_id fs_enet_match[] = {
 		.compatible = "fsl,cpm1-scc-enet",
 		.data = (void *)&fs_scc_ops,
 	},
+	{
+		.compatible = "fsl,cpm2-scc-enet",
+		.data = (void *)&fs_scc_ops,
+	},
 #endif
 #ifdef CONFIG_FS_ENET_HAS_FCC
 	{
diff --git a/drivers/net/fs_enet/mac-scc.c b/drivers/net/fs_enet/mac-scc.c
index 029b3c7ef29..22f50dd8b27 100644
--- a/drivers/net/fs_enet/mac-scc.c
+++ b/drivers/net/fs_enet/mac-scc.c
@@ -47,7 +47,6 @@
 #include "fs_enet.h"
 
 /*************************************************/
-
 #if defined(CONFIG_CPM1)
 /* for a 8xx __raw_xxx's are sufficient */
 #define __fs_out32(addr, x)	__raw_writel(x, addr)
@@ -62,6 +61,8 @@
 #define __fs_out16(addr, x)	out_be16(addr, x)
 #define __fs_in32(addr)	in_be32(addr)
 #define __fs_in16(addr)	in_be16(addr)
+#define __fs_out8(addr, x)	out_8(addr, x)
+#define __fs_in8(addr)	in_8(addr)
 #endif
 
 /* write, read, set bits, clear bits */
@@ -262,8 +263,13 @@ static void restart(struct net_device *dev)
 
 	/* Initialize function code registers for big-endian.
 	 */
+#ifndef CONFIG_NOT_COHERENT_CACHE
+	W8(ep, sen_genscc.scc_rfcr, SCC_EB | SCC_GBL);
+	W8(ep, sen_genscc.scc_tfcr, SCC_EB | SCC_GBL);
+#else
 	W8(ep, sen_genscc.scc_rfcr, SCC_EB);
 	W8(ep, sen_genscc.scc_tfcr, SCC_EB);
+#endif
 
 	/* Set maximum bytes per receive buffer.
 	 * This appears to be an Ethernet frame size, not the buffer
-- 
GitLab


From d3d7b53d1ae46534cd73e1073a5c29e3b61a0552 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Fri, 22 Aug 2008 19:24:15 +0100
Subject: [PATCH 494/869] [netdrvr] fix build issue: undefined reference to
 `NS8390p_init'

Signed-off-by: Alan 'pass the paper bags' Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/wd.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wd.c b/drivers/net/wd.c
index 6f9aa164374..fa14255282a 100644
--- a/drivers/net/wd.c
+++ b/drivers/net/wd.c
@@ -337,7 +337,7 @@ static int __init wd_probe1(struct net_device *dev, int ioaddr)
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	dev->poll_controller = ei_poll;
 #endif
-	NS8390p_init(dev, 0);
+	NS8390_init(dev, 0);
 
 #if 1
 	/* Enable interrupt generation on softconfig cards -- M.U */
-- 
GitLab


From 2b356b463933031374c373f70d9a3b14ec707161 Mon Sep 17 00:00:00 2001
From: Martin Schwidefsky <schwidefsky@de.ibm.com>
Date: Thu, 21 Aug 2008 17:10:22 +0200
Subject: [PATCH 495/869] claw: fix memory leak in claw_probe.

probe_error() frees memory only, if cgdev->dev.driver_data refers
to the claw_privbk structure. Move forward its setting in claw_probe()
to ensure proper freeing of claw_privbk allocations.

Cc: Daniel <danielm77@spray.se>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/s390/net/claw.c | 19 ++++++++-----------
 1 file changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index a08b1682c8e..cc5697deb1d 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -271,6 +271,7 @@ claw_probe(struct ccwgroup_device *cgdev)
 	if (!get_device(&cgdev->dev))
 		return -ENODEV;
 	privptr = kzalloc(sizeof(struct claw_privbk), GFP_KERNEL);
+	cgdev->dev.driver_data = privptr;
 	if (privptr == NULL) {
 		probe_error(cgdev);
 		put_device(&cgdev->dev);
@@ -305,7 +306,6 @@ claw_probe(struct ccwgroup_device *cgdev)
 	privptr->p_env->p_priv = privptr;
         cgdev->cdev[0]->handler = claw_irq_handler;
 	cgdev->cdev[1]->handler = claw_irq_handler;
-	cgdev->dev.driver_data = privptr;
 	CLAW_DBF_TEXT(2, setup, "prbext 0");
 
         return 0;
@@ -1960,19 +1960,16 @@ init_ccw_bk(struct net_device *dev)
 static void
 probe_error( struct ccwgroup_device *cgdev)
 {
-  struct claw_privbk *privptr;
+	struct claw_privbk *privptr;
 
 	CLAW_DBF_TEXT(4, trace, "proberr");
-        privptr=(struct claw_privbk *)cgdev->dev.driver_data;
-	if (privptr!=NULL) {
+	privptr = (struct claw_privbk *) cgdev->dev.driver_data;
+	if (privptr != NULL) {
+		cgdev->dev.driver_data = NULL;
 		kfree(privptr->p_env);
-		privptr->p_env=NULL;
-                kfree(privptr->p_mtc_envelope);
-               	privptr->p_mtc_envelope=NULL;
-                kfree(privptr);
-                privptr=NULL;
-        }
-        return;
+		kfree(privptr->p_mtc_envelope);
+		kfree(privptr);
+	}
 }    /*    probe_error    */
 
 /*-------------------------------------------------------------------*
-- 
GitLab


From 6951df34d50330f1b117fd8371d7f7df39f43f6a Mon Sep 17 00:00:00 2001
From: Peter Tiedemann <ptiedem@de.ibm.com>
Date: Thu, 21 Aug 2008 17:10:23 +0200
Subject: [PATCH 496/869] claw: netdev->priv vs. netdev->ml_priv

Use netdev->ml_priv instead of netdev->priv

Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/s390/net/claw.c | 60 ++++++++++++++++++++---------------------
 1 file changed, 30 insertions(+), 30 deletions(-)

diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index cc5697deb1d..e10ac9ab2d4 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -133,14 +133,14 @@ claw_register_debug_facility(void)
 static inline void
 claw_set_busy(struct net_device *dev)
 {
- ((struct claw_privbk *) dev->priv)->tbusy=1;
+ ((struct claw_privbk *)dev->ml_priv)->tbusy = 1;
  eieio();
 }
 
 static inline void
 claw_clear_busy(struct net_device *dev)
 {
-	clear_bit(0, &(((struct claw_privbk *) dev->priv)->tbusy));
+	clear_bit(0, &(((struct claw_privbk *) dev->ml_priv)->tbusy));
 	netif_wake_queue(dev);
 	eieio();
 }
@@ -149,20 +149,20 @@ static inline int
 claw_check_busy(struct net_device *dev)
 {
 	eieio();
-	return ((struct claw_privbk *) dev->priv)->tbusy;
+	return ((struct claw_privbk *) dev->ml_priv)->tbusy;
 }
 
 static inline void
 claw_setbit_busy(int nr,struct net_device *dev)
 {
 	netif_stop_queue(dev);
- 	set_bit(nr, (void *)&(((struct claw_privbk *)dev->priv)->tbusy));
+	set_bit(nr, (void *)&(((struct claw_privbk *)dev->ml_priv)->tbusy));
 }
 
 static inline void
 claw_clearbit_busy(int nr,struct net_device *dev)
 {
- 	clear_bit(nr,(void *)&(((struct claw_privbk *)dev->priv)->tbusy));
+	clear_bit(nr, (void *)&(((struct claw_privbk *)dev->ml_priv)->tbusy));
 	netif_wake_queue(dev);
 }
 
@@ -171,7 +171,7 @@ claw_test_and_setbit_busy(int nr,struct net_device *dev)
 {
 	netif_stop_queue(dev);
 	return test_and_set_bit(nr,
- 		(void *)&(((struct claw_privbk *) dev->priv)->tbusy));
+		(void *)&(((struct claw_privbk *) dev->ml_priv)->tbusy));
 }
 
 
@@ -319,7 +319,7 @@ static int
 claw_tx(struct sk_buff *skb, struct net_device *dev)
 {
         int             rc;
-        struct claw_privbk *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
 	unsigned long saveflags;
         struct chbk *p_ch;
 
@@ -404,7 +404,7 @@ claw_pack_skb(struct claw_privbk *privptr)
 static int
 claw_change_mtu(struct net_device *dev, int new_mtu)
 {
-	struct claw_privbk  *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
 	int buff_size;
 	CLAW_DBF_TEXT(4, trace, "setmtu");
 	buff_size = privptr->p_env->write_size;
@@ -434,7 +434,7 @@ claw_open(struct net_device *dev)
         struct ccwbk *p_buf;
 
 	CLAW_DBF_TEXT(4, trace, "open");
-	privptr = (struct claw_privbk *)dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         /*   allocate and initialize CCW blocks */
 	if (privptr->buffs_alloc == 0) {
 	        rc=init_ccw_bk(dev);
@@ -780,7 +780,7 @@ claw_irq_tasklet ( unsigned long data )
 	p_ch = (struct chbk *) data;
         dev = (struct net_device *)p_ch->ndev;
 	CLAW_DBF_TEXT(4, trace, "IRQtask");
-        privptr = (struct claw_privbk *) dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         unpack_read(dev);
         clear_bit(CLAW_BH_ACTIVE, (void *)&p_ch->flag_a);
 	CLAW_DBF_TEXT(4, trace, "TskletXt");
@@ -805,7 +805,7 @@ claw_release(struct net_device *dev)
 
 	if (!dev)
                 return 0;
-        privptr = (struct claw_privbk *) dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         if (!privptr)
                 return 0;
 	CLAW_DBF_TEXT(4, trace, "release");
@@ -960,7 +960,7 @@ claw_write_next ( struct chbk * p_ch )
         if (p_ch->claw_state == CLAW_STOP)
                 return;
         dev = (struct net_device *) p_ch->ndev;
-	privptr = (struct claw_privbk *) dev->priv;
+	privptr = (struct claw_privbk *) dev->ml_priv;
         claw_free_wrt_buf( dev );
 	if ((privptr->write_free_count > 0) &&
 	    !skb_queue_empty(&p_ch->collect_queue)) {
@@ -1042,7 +1042,7 @@ add_claw_reads(struct net_device *dev, struct ccwbk* p_first,
         struct ccw1  temp_ccw;
         struct endccw * p_end;
 	CLAW_DBF_TEXT(4, trace, "addreads");
-        privptr = dev->priv;
+	privptr = dev->ml_priv;
         p_end = privptr->p_end_ccw;
 
         /* first CCW and last CCW contains a new set of read channel programs
@@ -1212,7 +1212,7 @@ find_link(struct net_device *dev, char *host_name, char *ws_name )
 	int    rc=0;
 
 	CLAW_DBF_TEXT(2, setup, "findlink");
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
         p_env=privptr->p_env;
 	switch (p_env->packing)
 	{
@@ -1264,7 +1264,7 @@ claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid)
 	struct chbk			*ch;
 
 	CLAW_DBF_TEXT(4, trace, "hw_tx");
-        privptr = (struct claw_privbk *) (dev->priv);
+	privptr = (struct claw_privbk *)(dev->ml_priv);
         p_ch=(struct chbk *)&privptr->channel[WRITE];
 	p_env =privptr->p_env;
 	claw_free_wrt_buf(dev);	/* Clean up free chain if posible */
@@ -1483,8 +1483,8 @@ init_ccw_bk(struct net_device *dev)
 	struct ccwbk*p_last_CCWB;
 	struct ccwbk*p_first_CCWB;
         struct endccw *p_endccw=NULL;
-        addr_t  real_address;
-        struct claw_privbk *privptr=dev->priv;
+	addr_t  real_address;
+	struct claw_privbk *privptr = dev->ml_priv;
         struct clawh *pClawH=NULL;
         addr_t   real_TIC_address;
         int i,j;
@@ -1997,7 +1997,7 @@ claw_process_control( struct net_device *dev, struct ccwbk * p_ccw)
 	CLAW_DBF_TEXT(2, setup, "clw_cntl");
         udelay(1000);  /* Wait a ms for the control packets to
 			*catch up to each other */
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
         p_env=privptr->p_env;
 	tdev = &privptr->channel[READ].cdev->dev;
 	memcpy( &temp_host_name, p_env->host_name, 8);
@@ -2275,7 +2275,7 @@ claw_send_control(struct net_device *dev, __u8 type, __u8 link,
         struct sk_buff 			*skb;
 
 	CLAW_DBF_TEXT(2, setup, "sndcntl");
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
         p_ctl=(struct clawctl *)&privptr->ctl_bk;
 
         p_ctl->command=type;
@@ -2345,7 +2345,7 @@ static int
 claw_snd_conn_req(struct net_device *dev, __u8 link)
 {
         int                rc;
-        struct claw_privbk *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
         struct clawctl 	   *p_ctl;
 
 	CLAW_DBF_TEXT(2, setup, "snd_conn");
@@ -2405,7 +2405,7 @@ claw_snd_sys_validate_rsp(struct net_device *dev,
         int    rc;
 
 	CLAW_DBF_TEXT(2, setup, "chkresp");
-        privptr = dev->priv;
+	privptr = dev->ml_priv;
         p_env=privptr->p_env;
         rc=claw_send_control(dev, SYSTEM_VALIDATE_RESPONSE,
 		p_ctl->linkid,
@@ -2443,7 +2443,7 @@ net_device_stats *claw_stats(struct net_device *dev)
         struct claw_privbk *privptr;
 
 	CLAW_DBF_TEXT(4, trace, "stats");
-        privptr = dev->priv;
+	privptr = dev->ml_priv;
         return &privptr->stats;
 }     /*   end of claw_stats   */
 
@@ -2479,7 +2479,7 @@ unpack_read(struct net_device *dev )
         p_last_ccw=NULL;
 	p_packh=NULL;
 	p_packd=NULL;
-        privptr=dev->priv;
+	privptr = dev->ml_priv;
 
 	p_dev = &privptr->channel[READ].cdev->dev;
 	p_env = privptr->p_env;
@@ -2648,7 +2648,7 @@ claw_strt_read (struct net_device *dev, int lock )
         int        rc = 0;
         __u32      parm;
         unsigned long  saveflags = 0;
-        struct claw_privbk *privptr=dev->priv;
+	struct claw_privbk *privptr = dev->ml_priv;
         struct ccwbk*p_ccwbk;
         struct chbk *p_ch;
         struct clawh *p_clawh;
@@ -2705,7 +2705,7 @@ claw_strt_out_IO( struct net_device *dev )
 	if (!dev) {
 		return;
 	}
-        privptr=(struct claw_privbk *)dev->priv;
+	privptr = (struct claw_privbk *)dev->ml_priv;
         p_ch=&privptr->channel[WRITE];
 
 	CLAW_DBF_TEXT(4, trace, "strt_io");
@@ -2738,7 +2738,7 @@ static void
 claw_free_wrt_buf( struct net_device *dev )
 {
 
-        struct claw_privbk *privptr=(struct claw_privbk *)dev->priv;
+	struct claw_privbk *privptr = (struct claw_privbk *)dev->ml_priv;
         struct ccwbk*p_first_ccw;
 	struct ccwbk*p_last_ccw;
 	struct ccwbk*p_this_ccw;
@@ -2795,13 +2795,13 @@ claw_free_netdevice(struct net_device * dev, int free_dev)
 	if (!dev)
 		return;
 	CLAW_DBF_TEXT_(2, setup, "%s", dev->name);
-	privptr = dev->priv;
+	privptr = dev->ml_priv;
 	if (dev->flags & IFF_RUNNING)
 		claw_release(dev);
 	if (privptr) {
 		privptr->channel[READ].ndev = NULL;  /* say it's free */
 	}
-	dev->priv=NULL;
+	dev->ml_priv = NULL;
 #ifdef MODULE
 	if (free_dev) {
 		free_netdev(dev);
@@ -2918,7 +2918,7 @@ claw_new_device(struct ccwgroup_device *cgdev)
 		printk(KERN_WARNING "%s:alloc_netdev failed\n",__func__);
 		goto out;
 	}
-	dev->priv = privptr;
+	dev->ml_priv = privptr;
 	cgdev->dev.driver_data = privptr;
         cgdev->cdev[READ]->dev.driver_data = privptr;
         cgdev->cdev[WRITE]->dev.driver_data = privptr;
@@ -2999,7 +2999,7 @@ claw_shutdown_device(struct ccwgroup_device *cgdev)
 			ret = claw_release(ndev);
 		ndev->flags &=~IFF_RUNNING;
 		unregister_netdev(ndev);
-		ndev->priv = NULL;  /* cgdev data, not ndev's to free */
+		ndev->ml_priv = NULL;  /* cgdev data, not ndev's to free */
 		claw_free_netdevice(ndev, 1);
 		priv->channel[READ].ndev = NULL;
 		priv->channel[WRITE].ndev = NULL;
-- 
GitLab


From 261893d30b0ddb5587f9143df18a6efed39a7ed6 Mon Sep 17 00:00:00 2001
From: Peter Tiedemann <ptiedem@de.ibm.com>
Date: Thu, 21 Aug 2008 17:10:24 +0200
Subject: [PATCH 497/869] ctcm: netdev->priv vs. netdev->ml_priv

Use netdev->ml_priv instead of netdev->priv

Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/s390/net/ctcm_fsms.c | 56 ++++++++++++++++++------------------
 drivers/s390/net/ctcm_main.c | 24 ++++++++--------
 drivers/s390/net/ctcm_main.h |  9 +++---
 drivers/s390/net/ctcm_mpc.c  | 46 ++++++++++++++---------------
 4 files changed, 68 insertions(+), 67 deletions(-)

diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c
index 0b4e6253abe..42776550acf 100644
--- a/drivers/s390/net/ctcm_fsms.c
+++ b/drivers/s390/net/ctcm_fsms.c
@@ -245,7 +245,7 @@ static void chx_txdone(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct sk_buff *skb;
 	int first = 1;
 	int i;
@@ -336,7 +336,7 @@ void ctcm_chx_txidle(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_PR_DEBUG("%s(%s): %s\n", __func__, ch->id, dev->name);
 
@@ -357,7 +357,7 @@ static void chx_rx(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int len = ch->max_bufsize - ch->irb->scsw.cmd.count;
 	struct sk_buff *skb = ch->trans_skb;
 	__u16 block_len = *((__u16 *)skb->data);
@@ -459,7 +459,7 @@ static void chx_firstio(fsm_instance *fi, int event, void *arg)
 			chx_rxidle(fi, event, arg);
 		} else {
 			struct net_device *dev = ch->netdev;
-			struct ctcm_priv *priv = dev->priv;
+			struct ctcm_priv *priv = dev->ml_priv;
 			fsm_newstate(fi, CTC_STATE_TXIDLE);
 			fsm_event(priv->fsm, DEV_EVENT_TXUP, dev);
 		}
@@ -496,7 +496,7 @@ static void chx_firstio(fsm_instance *fi, int event, void *arg)
 	if ((CHANNEL_DIRECTION(ch->flags) == READ) &&
 	    (ch->protocol == CTCM_PROTO_S390)) {
 		struct net_device *dev = ch->netdev;
-		struct ctcm_priv *priv = dev->priv;
+		struct ctcm_priv *priv = dev->ml_priv;
 		fsm_event(priv->fsm, DEV_EVENT_RXUP, dev);
 	}
 }
@@ -514,7 +514,7 @@ static void chx_rxidle(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	__u16 buflen;
 	int rc;
 
@@ -699,7 +699,7 @@ static void ctcm_chx_cleanup(fsm_instance *fi, int state,
 		struct channel *ch)
 {
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE,
 			"%s(%s): %s[%d]\n",
@@ -784,7 +784,7 @@ static void ctcm_chx_setuperr(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	/*
 	 * Special case: Got UC_RCRESET on setmode.
@@ -874,7 +874,7 @@ static void ctcm_chx_rxiniterr(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	if (event == CTC_EVENT_TIMER) {
 		if (!IS_MPCDEV(dev))
@@ -902,7 +902,7 @@ static void ctcm_chx_rxinitfail(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
 			"%s(%s): RX %s busy, init. fail",
@@ -923,7 +923,7 @@ static void ctcm_chx_rxdisc(fsm_instance *fi, int event, void *arg)
 	struct channel *ch = arg;
 	struct channel *ch2;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
 			"%s: %s: remote disconnect - re-init ...",
@@ -954,7 +954,7 @@ static void ctcm_chx_txiniterr(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	if (event == CTC_EVENT_TIMER) {
 		fsm_deltimer(&ch->timer);
@@ -984,7 +984,7 @@ static void ctcm_chx_txretry(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct sk_buff *skb;
 
 	CTCM_PR_DEBUG("Enter: %s: cp=%i ch=0x%p id=%s\n",
@@ -1057,7 +1057,7 @@ static void ctcm_chx_iofatal(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int rd = CHANNEL_DIRECTION(ch->flags);
 
 	fsm_deltimer(&ch->timer);
@@ -1207,7 +1207,7 @@ static void ctcmpc_chx_txdone(fsm_instance *fi, int event, void *arg)
 {
 	struct channel		*ch = arg;
 	struct net_device	*dev = ch->netdev;
-	struct ctcm_priv	*priv = dev->priv;
+	struct ctcm_priv	*priv = dev->ml_priv;
 	struct mpc_group	*grp = priv->mpcg;
 	struct sk_buff		*skb;
 	int		first = 1;
@@ -1368,7 +1368,7 @@ static void ctcmpc_chx_rx(fsm_instance *fi, int event, void *arg)
 {
 	struct channel		*ch = arg;
 	struct net_device	*dev = ch->netdev;
-	struct ctcm_priv	*priv = dev->priv;
+	struct ctcm_priv	*priv = dev->ml_priv;
 	struct mpc_group	*grp = priv->mpcg;
 	struct sk_buff		*skb = ch->trans_skb;
 	struct sk_buff		*new_skb;
@@ -1471,7 +1471,7 @@ static void ctcmpc_chx_firstio(fsm_instance *fi, int event, void *arg)
 {
 	struct channel		*ch = arg;
 	struct net_device	*dev = ch->netdev;
-	struct ctcm_priv	*priv = dev->priv;
+	struct ctcm_priv	*priv = dev->ml_priv;
 	struct mpc_group	*gptr = priv->mpcg;
 
 	CTCM_PR_DEBUG("Enter %s: id=%s, ch=0x%p\n",
@@ -1525,7 +1525,7 @@ void ctcmpc_chx_rxidle(fsm_instance *fi, int event, void *arg)
 {
 	struct channel *ch = arg;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv  *priv = dev->priv;
+	struct ctcm_priv  *priv = dev->ml_priv;
 	struct mpc_group  *grp = priv->mpcg;
 	int rc;
 	unsigned long saveflags = 0;	/* avoids compiler warning */
@@ -1580,7 +1580,7 @@ static void ctcmpc_chx_attn(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	  *ch     = arg;
 	struct net_device *dev    = ch->netdev;
-	struct ctcm_priv  *priv   = dev->priv;
+	struct ctcm_priv  *priv   = dev->ml_priv;
 	struct mpc_group  *grp = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s(%s): %s(ch=0x%p), cp=%i, ChStat:%s, GrpStat:%s\n",
@@ -1639,7 +1639,7 @@ static void ctcmpc_chx_attnbusy(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	  *ch     = arg;
 	struct net_device *dev    = ch->netdev;
-	struct ctcm_priv  *priv   = dev->priv;
+	struct ctcm_priv  *priv   = dev->ml_priv;
 	struct mpc_group  *grp    = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s(%s): %s\n  ChState:%s GrpState:%s\n",
@@ -1724,7 +1724,7 @@ static void ctcmpc_chx_resend(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	   *ch	   = arg;
 	struct net_device  *dev    = ch->netdev;
-	struct ctcm_priv   *priv   = dev->priv;
+	struct ctcm_priv   *priv   = dev->ml_priv;
 	struct mpc_group   *grp    = priv->mpcg;
 
 	fsm_event(grp->fsm, MPCG_EVENT_XID0DO, ch);
@@ -1740,7 +1740,7 @@ static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel *ach = arg;
 	struct net_device *dev = ach->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct channel *wch = priv->channel[WRITE];
 	struct channel *rch = priv->channel[READ];
@@ -2050,7 +2050,7 @@ int mpc_ch_fsm_len = ARRAY_SIZE(ctcmpc_ch_fsm);
 static void dev_action_start(fsm_instance *fi, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int direction;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
@@ -2076,7 +2076,7 @@ static void dev_action_stop(fsm_instance *fi, int event, void *arg)
 {
 	int direction;
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 
@@ -2096,7 +2096,7 @@ static void dev_action_restart(fsm_instance *fi, int event, void *arg)
 {
 	int restart_timer;
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(TRACE, dev, "");
 
@@ -2133,12 +2133,12 @@ static void dev_action_restart(fsm_instance *fi, int event, void *arg)
 static void dev_action_chup(fsm_instance *fi, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	int dev_stat = fsm_getstate(fi);
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_NOTICE,
 			"%s(%s): priv = %p [%d,%d]\n ",	CTCM_FUNTAIL,
-				dev->name, dev->priv, dev_stat, event);
+				dev->name, dev->ml_priv, dev_stat, event);
 
 	switch (fsm_getstate(fi)) {
 	case DEV_STATE_STARTWAIT_RXTX:
@@ -2195,7 +2195,7 @@ static void dev_action_chdown(fsm_instance *fi, int event, void *arg)
 {
 
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index 126a3ebb8ab..b11fec24c7d 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -69,7 +69,7 @@ struct channel *channels;
 void ctcm_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 {
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	__u16 len = *((__u16 *) pskb->data);
 
 	skb_put(pskb, 2 + LL_HEADER_LENGTH);
@@ -414,7 +414,7 @@ int ctcm_ch_alloc_buffer(struct channel *ch)
  */
 int ctcm_open(struct net_device *dev)
 {
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 	if (!IS_MPC(priv))
@@ -432,7 +432,7 @@ int ctcm_open(struct net_device *dev)
  */
 int ctcm_close(struct net_device *dev)
 {
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	CTCMY_DBF_DEV_NAME(SETUP, dev, "");
 	if (!IS_MPC(priv))
@@ -573,7 +573,7 @@ static int ctcm_transmit_skb(struct channel *ch, struct sk_buff *skb)
 		skb_pull(skb, LL_HEADER_LENGTH + 2);
 	} else if (ccw_idx == 0) {
 		struct net_device *dev = ch->netdev;
-		struct ctcm_priv *priv = dev->priv;
+		struct ctcm_priv *priv = dev->ml_priv;
 		priv->stats.tx_packets++;
 		priv->stats.tx_bytes += skb->len - LL_HEADER_LENGTH;
 	}
@@ -592,7 +592,7 @@ static void ctcmpc_send_sweep_req(struct channel *rch)
 	struct channel *ch;
 	/* int rc = 0; */
 
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 	ch = priv->channel[WRITE];
 
@@ -652,7 +652,7 @@ static int ctcmpc_transmit_skb(struct channel *ch, struct sk_buff *skb)
 {
 	struct pdu *p_header;
 	struct net_device *dev = ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct th_header *header;
 	struct sk_buff *nskb;
@@ -867,7 +867,7 @@ done:
 /* first merge version - leaving both functions separated */
 static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 {
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 
 	if (skb == NULL) {
 		CTCM_DBF_TEXT_(ERROR, CTC_DBF_ERROR,
@@ -911,7 +911,7 @@ static int ctcm_tx(struct sk_buff *skb, struct net_device *dev)
 static int ctcmpc_tx(struct sk_buff *skb, struct net_device *dev)
 {
 	int len = 0;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp  = priv->mpcg;
 	struct sk_buff *newskb = NULL;
 
@@ -1025,7 +1025,7 @@ static int ctcm_change_mtu(struct net_device *dev, int new_mtu)
 	if (new_mtu < 576 || new_mtu > 65527)
 		return -EINVAL;
 
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	max_bufsize = priv->channel[READ]->max_bufsize;
 
 	if (IS_MPC(priv)) {
@@ -1050,7 +1050,7 @@ static int ctcm_change_mtu(struct net_device *dev, int new_mtu)
  */
 static struct net_device_stats *ctcm_stats(struct net_device *dev)
 {
-	return &((struct ctcm_priv *)dev->priv)->stats;
+	return &((struct ctcm_priv *)dev->ml_priv)->stats;
 }
 
 static void ctcm_free_netdevice(struct net_device *dev)
@@ -1060,7 +1060,7 @@ static void ctcm_free_netdevice(struct net_device *dev)
 
 	CTCM_DBF_TEXT_(SETUP, CTC_DBF_INFO,
 			"%s(%s)", CTCM_FUNTAIL, dev->name);
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	if (priv) {
 		grp = priv->mpcg;
 		if (grp) {
@@ -1125,7 +1125,7 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv)
 			CTCM_FUNTAIL);
 		return NULL;
 	}
-	dev->priv = priv;
+	dev->ml_priv = priv;
 	priv->fsm = init_fsm("ctcmdev", dev_state_names, dev_event_names,
 				CTCM_NR_DEV_STATES, CTCM_NR_DEV_EVENTS,
 				dev_fsm, dev_fsm_len, GFP_KERNEL);
diff --git a/drivers/s390/net/ctcm_main.h b/drivers/s390/net/ctcm_main.h
index a72e0feeb27..8e10ee86a5e 100644
--- a/drivers/s390/net/ctcm_main.h
+++ b/drivers/s390/net/ctcm_main.h
@@ -229,14 +229,14 @@ void ctcm_remove_files(struct device *dev);
  */
 static inline void ctcm_clear_busy_do(struct net_device *dev)
 {
-	clear_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy));
+	clear_bit(0, &(((struct ctcm_priv *)dev->ml_priv)->tbusy));
 	netif_wake_queue(dev);
 }
 
 static inline void ctcm_clear_busy(struct net_device *dev)
 {
 	struct mpc_group *grp;
-	grp = ((struct ctcm_priv *)dev->priv)->mpcg;
+	grp = ((struct ctcm_priv *)dev->ml_priv)->mpcg;
 
 	if (!(grp && grp->in_sweep))
 		ctcm_clear_busy_do(dev);
@@ -246,7 +246,8 @@ static inline void ctcm_clear_busy(struct net_device *dev)
 static inline int ctcm_test_and_set_busy(struct net_device *dev)
 {
 	netif_stop_queue(dev);
-	return test_and_set_bit(0, &(((struct ctcm_priv *)dev->priv)->tbusy));
+	return test_and_set_bit(0,
+			&(((struct ctcm_priv *)dev->ml_priv)->tbusy));
 }
 
 extern int loglevel;
@@ -292,7 +293,7 @@ struct mpc_group *ctcmpc_init_mpc_group(struct ctcm_priv *priv);
 #define IS_MPC(p) ((p)->protocol == CTCM_PROTO_MPC)
 
 /* test if struct ctcm_priv of struct net_device has MPC protocol setting */
-#define IS_MPCDEV(d) IS_MPC((struct ctcm_priv *)d->priv)
+#define IS_MPCDEV(dev) IS_MPC((struct ctcm_priv *)dev->ml_priv)
 
 static inline gfp_t gfp_type(void)
 {
diff --git a/drivers/s390/net/ctcm_mpc.c b/drivers/s390/net/ctcm_mpc.c
index 49ae1cd25ca..407f816f091 100644
--- a/drivers/s390/net/ctcm_mpc.c
+++ b/drivers/s390/net/ctcm_mpc.c
@@ -313,10 +313,10 @@ static struct net_device *ctcmpc_get_dev(int port_num)
 					CTCM_FUNTAIL, device);
 		return NULL;
 	}
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	if (priv == NULL) {
 		CTCM_DBF_TEXT_(MPC_ERROR, CTC_DBF_ERROR,
-			"%s(%s): dev->priv is NULL",
+			"%s(%s): dev->ml_priv is NULL",
 					CTCM_FUNTAIL, device);
 		return NULL;
 	}
@@ -345,7 +345,7 @@ int ctc_mpc_alloc_channel(int port_num, void (*callback)(int, int))
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return 1;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 
 	grp->allochanfunc = callback;
@@ -417,7 +417,7 @@ void ctc_mpc_establish_connectivity(int port_num,
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 	rch = priv->channel[READ];
 	wch = priv->channel[WRITE];
@@ -535,7 +535,7 @@ void ctc_mpc_dealloc_ch(int port_num)
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 
 	CTCM_DBF_TEXT_(MPC_SETUP, CTC_DBF_DEBUG,
@@ -571,7 +571,7 @@ void ctc_mpc_flow_control(int port_num, int flowc)
 	dev = ctcmpc_get_dev(port_num);
 	if (dev == NULL)
 		return;
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 
 	CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_DEBUG,
@@ -620,7 +620,7 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo)
 {
 	struct channel	  *rch = mpcginfo->ch;
 	struct net_device *dev = rch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group  *grp = priv->mpcg;
 	struct channel	  *ch = priv->channel[WRITE];
 
@@ -651,7 +651,7 @@ static void mpc_rcvd_sweep_resp(struct mpcg_info *mpcginfo)
 static void ctcmpc_send_sweep_resp(struct channel *rch)
 {
 	struct net_device *dev = rch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	int rc = 0;
 	struct th_sweep *header;
@@ -713,7 +713,7 @@ static void mpc_rcvd_sweep_req(struct mpcg_info *mpcginfo)
 {
 	struct channel	  *rch     = mpcginfo->ch;
 	struct net_device *dev     = rch->netdev;
-	struct ctcm_priv  *priv = dev->priv;
+	struct ctcm_priv  *priv = dev->ml_priv;
 	struct mpc_group  *grp  = priv->mpcg;
 	struct channel	  *ch	   = priv->channel[WRITE];
 
@@ -847,7 +847,7 @@ static int mpcg_fsm_len = ARRAY_SIZE(mpcg_fsm);
 static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 
 	if (grp == NULL) {
@@ -891,7 +891,7 @@ static void mpc_action_go_ready(fsm_instance *fsm, int event, void *arg)
 void mpc_group_ready(unsigned long adev)
 {
 	struct net_device *dev = (struct net_device *)adev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct channel *ch = NULL;
 
@@ -947,7 +947,7 @@ void mpc_group_ready(unsigned long adev)
 void mpc_channel_action(struct channel *ch, int direction, int action)
 {
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 
 	if (grp == NULL) {
@@ -1057,7 +1057,7 @@ done:
 static void ctcmpc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
 {
 	struct net_device *dev	= ch->netdev;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 	struct pdu *curr_pdu;
 	struct mpcg_info *mpcginfo;
@@ -1255,7 +1255,7 @@ void ctcmpc_bh(unsigned long thischan)
 	struct channel	  *ch	= (struct channel *)thischan;
 	struct sk_buff	  *skb;
 	struct net_device *dev	= ch->netdev;
-	struct ctcm_priv  *priv	= dev->priv;
+	struct ctcm_priv  *priv	= dev->ml_priv;
 	struct mpc_group  *grp	= priv->mpcg;
 
 	CTCM_PR_DEBUG("%s cp:%i enter:  %s() %s\n",
@@ -1377,7 +1377,7 @@ static void mpc_action_go_inop(fsm_instance *fi, int event, void *arg)
 	BUG_ON(dev == NULL);
 	CTCM_PR_DEBUG("Enter %s: %s\n",	__func__, dev->name);
 
-	priv  = dev->priv;
+	priv  = dev->ml_priv;
 	grp =  priv->mpcg;
 	grp->flow_off_called = 0;
 	fsm_deltimer(&grp->timer);
@@ -1483,7 +1483,7 @@ static void mpc_action_timeout(fsm_instance *fi, int event, void *arg)
 
 	BUG_ON(dev == NULL);
 
-	priv = dev->priv;
+	priv = dev->ml_priv;
 	grp = priv->mpcg;
 	wch = priv->channel[WRITE];
 	rch = priv->channel[READ];
@@ -1521,7 +1521,7 @@ void mpc_action_discontact(fsm_instance *fi, int event, void *arg)
 	if (ch) {
 		dev = ch->netdev;
 		if (dev) {
-			priv = dev->priv;
+			priv = dev->ml_priv;
 			if (priv) {
 				CTCM_DBF_TEXT_(MPC_TRACE, CTC_DBF_NOTICE,
 					"%s: %s: %s\n",
@@ -1569,7 +1569,7 @@ static int mpc_validate_xid(struct mpcg_info *mpcginfo)
 {
 	struct channel	   *ch	 = mpcginfo->ch;
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 	struct xid2	   *xid  = mpcginfo->xid;
 	int	rc	 = 0;
@@ -1866,7 +1866,7 @@ static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg)
 {
 	struct channel	   *ch   = arg;
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 
 	CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
@@ -1906,7 +1906,7 @@ static void mpc_action_doxid0(fsm_instance *fsm, int event, void *arg)
 static void mpc_action_doxid7(fsm_instance *fsm, int event, void *arg)
 {
 	struct net_device *dev = arg;
-	struct ctcm_priv  *priv = dev->priv;
+	struct ctcm_priv  *priv = dev->ml_priv;
 	struct mpc_group  *grp  = NULL;
 	int direction;
 	int send = 0;
@@ -1983,7 +1983,7 @@ static void mpc_action_rcvd_xid0(fsm_instance *fsm, int event, void *arg)
 	struct mpcg_info   *mpcginfo  = arg;
 	struct channel	   *ch   = mpcginfo->ch;
 	struct net_device  *dev  = ch->netdev;
-	struct ctcm_priv   *priv = dev->priv;
+	struct ctcm_priv   *priv = dev->ml_priv;
 	struct mpc_group   *grp  = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s: ch-id:%s xid2:%i xid7:%i xidt_p2:%i \n",
@@ -2045,7 +2045,7 @@ static void mpc_action_rcvd_xid7(fsm_instance *fsm, int event, void *arg)
 	struct mpcg_info   *mpcginfo   = arg;
 	struct channel	   *ch	       = mpcginfo->ch;
 	struct net_device  *dev        = ch->netdev;
-	struct ctcm_priv   *priv    = dev->priv;
+	struct ctcm_priv   *priv    = dev->ml_priv;
 	struct mpc_group   *grp     = priv->mpcg;
 
 	CTCM_PR_DEBUG("Enter %s: cp=%i ch=0x%p id=%s\n",
@@ -2097,7 +2097,7 @@ static int mpc_send_qllc_discontact(struct net_device *dev)
 	__u32	new_len	= 0;
 	struct sk_buff   *skb;
 	struct qllc      *qllcptr;
-	struct ctcm_priv *priv = dev->priv;
+	struct ctcm_priv *priv = dev->ml_priv;
 	struct mpc_group *grp = priv->mpcg;
 
 	CTCM_PR_DEBUG("%s: GROUP STATE: %s\n",
-- 
GitLab


From 9b3b9ab6a7a43851ccb4633149d01239f99f275f Mon Sep 17 00:00:00 2001
From: "Klaus-D. Wacker" <kdwacker@de.ibm.com>
Date: Thu, 21 Aug 2008 17:10:25 +0200
Subject: [PATCH 498/869] LCS recovery dumps when cable reconnect

LCS recovery dumps in irq routine when CCW address in
Subchannel Status Word (SCSW) is zero. This occurs
when recovery is driven after cable reconnect.

Signed-off-by: Klaus-D. Wacker <kdwacker@de.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/s390/net/lcs.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 6de28385b35..9bcfa04d863 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1412,7 +1412,8 @@ lcs_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 	}
 	/* How far in the ccw chain have we processed? */
 	if ((channel->state != LCS_CH_STATE_INIT) &&
-	    (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC)) {
+	    (irb->scsw.cmd.fctl & SCSW_FCTL_START_FUNC) &&
+	    (irb->scsw.cmd.cpa != 0)) {
 		index = (struct ccw1 *) __va((addr_t) irb->scsw.cmd.cpa)
 			- channel->ccws;
 		if ((irb->scsw.cmd.actl & SCSW_ACTL_SUSPENDED) ||
-- 
GitLab


From f7a54c13c7b072d9426bd5cec1cdb8306df5ef55 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Wed, 27 Aug 2008 02:22:07 -0700
Subject: [PATCH 499/869] pkt_sched: Use rcu_assign_pointer() to change
 dev_queue->qdisc

These pointers are RCU protected, so proper primitives should be used.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/sch_api.c     | 2 +-
 net/sched/sch_generic.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 341d558b6e3..ad9cda1b8c0 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -635,7 +635,7 @@ static struct Qdisc *dev_graft_qdisc(struct netdev_queue *dev_queue,
 	if (qdisc == NULL)
 		qdisc = &noop_qdisc;
 	dev_queue->qdisc_sleeping = qdisc;
-	dev_queue->qdisc = &noop_qdisc;
+	rcu_assign_pointer(dev_queue->qdisc, &noop_qdisc);
 
 	spin_unlock_bh(root_lock);
 
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 5f0ade7806a..9634091ee2f 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -634,7 +634,7 @@ static void dev_deactivate_queue(struct net_device *dev,
 		if (!(qdisc->flags & TCQ_F_BUILTIN))
 			set_bit(__QDISC_STATE_DEACTIVATED, &qdisc->state);
 
-		dev_queue->qdisc = qdisc_default;
+		rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
 		qdisc_reset(qdisc);
 
 		spin_unlock_bh(qdisc_lock(qdisc));
@@ -709,7 +709,7 @@ static void shutdown_scheduler_queue(struct net_device *dev,
 	struct Qdisc *qdisc_default = _qdisc_default;
 
 	if (qdisc) {
-		dev_queue->qdisc = qdisc_default;
+		rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
 		dev_queue->qdisc_sleeping = qdisc_default;
 
 		qdisc_destroy(qdisc);
-- 
GitLab


From f6f9b93f1624206c802ac9162c9302edaf59bfd9 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Wed, 27 Aug 2008 02:25:17 -0700
Subject: [PATCH 500/869] pkt_sched: Fix gen_estimator locks

While passing a qdisc root lock to gen_new_estimator() and
gen_replace_estimator() dev could be deactivated or even before
grafting proper root qdisc as qdisc_sleeping (e.g. qdisc_create), so
using qdisc_root_lock() is not enough. This patch adds
qdisc_root_sleeping_lock() for this, plus additional checks, where
necessary.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/sch_generic.h |  8 ++++++++
 net/sched/sch_api.c       | 14 +++++++++++---
 net/sched/sch_cbq.c       |  4 ++--
 net/sched/sch_hfsc.c      |  4 ++--
 net/sched/sch_htb.c       |  4 ++--
 5 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index b1d2cfea89c..ef8a7e2e12e 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -217,6 +217,14 @@ static inline spinlock_t *qdisc_root_lock(struct Qdisc *qdisc)
 	return qdisc_lock(root);
 }
 
+static inline spinlock_t *qdisc_root_sleeping_lock(struct Qdisc *qdisc)
+{
+	struct Qdisc *root = qdisc_root_sleeping(qdisc);
+
+	ASSERT_RTNL();
+	return qdisc_lock(root);
+}
+
 static inline struct net_device *qdisc_dev(struct Qdisc *qdisc)
 {
 	return qdisc->dev_queue->dev;
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index ad9cda1b8c0..506b709510b 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -830,9 +830,16 @@ qdisc_create(struct net_device *dev, struct netdev_queue *dev_queue,
 			sch->stab = stab;
 		}
 		if (tca[TCA_RATE]) {
+			spinlock_t *root_lock;
+
+			if ((sch->parent != TC_H_ROOT) &&
+			    !(sch->flags & TCQ_F_INGRESS))
+				root_lock = qdisc_root_sleeping_lock(sch);
+			else
+				root_lock = qdisc_lock(sch);
+
 			err = gen_new_estimator(&sch->bstats, &sch->rate_est,
-						qdisc_root_lock(sch),
-						tca[TCA_RATE]);
+						root_lock, tca[TCA_RATE]);
 			if (err) {
 				/*
 				 * Any broken qdiscs that would require
@@ -884,7 +891,8 @@ static int qdisc_change(struct Qdisc *sch, struct nlattr **tca)
 
 	if (tca[TCA_RATE])
 		gen_replace_estimator(&sch->bstats, &sch->rate_est,
-				      qdisc_root_lock(sch), tca[TCA_RATE]);
+				      qdisc_root_sleeping_lock(sch),
+				      tca[TCA_RATE]);
 	return 0;
 }
 
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 8fa90d68ec6..9b720adedea 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -1839,7 +1839,7 @@ cbq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **t
 
 		if (tca[TCA_RATE])
 			gen_replace_estimator(&cl->bstats, &cl->rate_est,
-					      qdisc_root_lock(sch),
+					      qdisc_root_sleeping_lock(sch),
 					      tca[TCA_RATE]);
 		return 0;
 	}
@@ -1930,7 +1930,7 @@ cbq_change_class(struct Qdisc *sch, u32 classid, u32 parentid, struct nlattr **t
 
 	if (tca[TCA_RATE])
 		gen_new_estimator(&cl->bstats, &cl->rate_est,
-				  qdisc_root_lock(sch), tca[TCA_RATE]);
+				  qdisc_root_sleeping_lock(sch), tca[TCA_RATE]);
 
 	*arg = (unsigned long)cl;
 	return 0;
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index c2b8d9cce3d..c1e77da8cd0 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1045,7 +1045,7 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 
 		if (tca[TCA_RATE])
 			gen_replace_estimator(&cl->bstats, &cl->rate_est,
-					      qdisc_root_lock(sch),
+					      qdisc_root_sleeping_lock(sch),
 					      tca[TCA_RATE]);
 		return 0;
 	}
@@ -1104,7 +1104,7 @@ hfsc_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 
 	if (tca[TCA_RATE])
 		gen_new_estimator(&cl->bstats, &cl->rate_est,
-				  qdisc_root_lock(sch), tca[TCA_RATE]);
+				  qdisc_root_sleeping_lock(sch), tca[TCA_RATE]);
 	*arg = (unsigned long)cl;
 	return 0;
 }
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 0df0df202ed..97d4761cc31 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -1372,7 +1372,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
 			goto failure;
 
 		gen_new_estimator(&cl->bstats, &cl->rate_est,
-				  qdisc_root_lock(sch),
+				  qdisc_root_sleeping_lock(sch),
 				  tca[TCA_RATE] ? : &est.nla);
 		cl->refcnt = 1;
 		cl->children = 0;
@@ -1427,7 +1427,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
 	} else {
 		if (tca[TCA_RATE])
 			gen_replace_estimator(&cl->bstats, &cl->rate_est,
-					      qdisc_root_lock(sch),
+					      qdisc_root_sleeping_lock(sch),
 					      tca[TCA_RATE]);
 		sch_tree_lock(sch);
 	}
-- 
GitLab


From fe439dd09d3e4da6a44d35df7371b9c6a2661b99 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Wed, 27 Aug 2008 02:27:10 -0700
Subject: [PATCH 501/869] pkt_sched: Fix sch_tree_lock()

Use new qdisc_root_sleeping_lock() instead of qdisc_root_lock() as
sch_tree_lock() because this lock could be used while dev is
deactivated, but we never need to use this with noop_qdisc as a root.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/sch_generic.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index ef8a7e2e12e..e5569625d2a 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -232,12 +232,12 @@ static inline struct net_device *qdisc_dev(struct Qdisc *qdisc)
 
 static inline void sch_tree_lock(struct Qdisc *q)
 {
-	spin_lock_bh(qdisc_root_lock(q));
+	spin_lock_bh(qdisc_root_sleeping_lock(q));
 }
 
 static inline void sch_tree_unlock(struct Qdisc *q)
 {
-	spin_unlock_bh(qdisc_root_lock(q));
+	spin_unlock_bh(qdisc_root_sleeping_lock(q));
 }
 
 #define tcf_tree_lock(tp)	sch_tree_lock((tp)->q)
-- 
GitLab


From 7982d5e1b350acb96aa156916c44c25ef87bb809 Mon Sep 17 00:00:00 2001
From: Philip Love <love_phil@emc.com>
Date: Wed, 27 Aug 2008 02:33:50 -0700
Subject: [PATCH 502/869] tcp: fix tcp header size miscalculation when window
 scale is unused

The size of the TCP header is miscalculated when the window scale ends
up being 0. Additionally, this can be induced by sending a SYN to a
passive open port with a window scale option with value 0.

Signed-off-by: Philip Love <love_phil@emc.com>
Signed-off-by: Adam Langley <agl@imperialviolet.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/tcp_output.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index a00532de2a8..8165f5aa8c7 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -468,7 +468,8 @@ static unsigned tcp_syn_options(struct sock *sk, struct sk_buff *skb,
 	}
 	if (likely(sysctl_tcp_window_scaling)) {
 		opts->ws = tp->rx_opt.rcv_wscale;
-		size += TCPOLEN_WSCALE_ALIGNED;
+		if(likely(opts->ws))
+			size += TCPOLEN_WSCALE_ALIGNED;
 	}
 	if (likely(sysctl_tcp_sack)) {
 		opts->options |= OPTION_SACK_ADVERTISE;
@@ -509,7 +510,8 @@ static unsigned tcp_synack_options(struct sock *sk,
 
 	if (likely(ireq->wscale_ok)) {
 		opts->ws = ireq->rcv_wscale;
-		size += TCPOLEN_WSCALE_ALIGNED;
+		if(likely(opts->ws))
+			size += TCPOLEN_WSCALE_ALIGNED;
 	}
 	if (likely(doing_ts)) {
 		opts->options |= OPTION_TS;
-- 
GitLab


From d994af0d50efc96b2077978fe9f066992639d525 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Wed, 27 Aug 2008 02:35:18 -0700
Subject: [PATCH 503/869] ipv4: mode 0555 in ipv4_skeleton

vpnc on today's kernel says Cannot open "/proc/sys/net/ipv4/route/flush":
d--------- 0 root root 0 2008-08-26 11:32 /proc/sys/net/ipv4/route
d--------- 0 root root 0 2008-08-26 19:16 /proc/sys/net/ipv4/neigh

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/route.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index e91bafeb32f..6ee5354c9aa 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -3121,9 +3121,9 @@ static struct ctl_table empty[1];
 static struct ctl_table ipv4_skeleton[] =
 {
 	{ .procname = "route", .ctl_name = NET_IPV4_ROUTE,
-	  .child = ipv4_route_table},
+	  .mode = 0555, .child = ipv4_route_table},
 	{ .procname = "neigh", .ctl_name = NET_IPV4_NEIGH,
-	  .child = empty},
+	  .mode = 0555, .child = empty},
 	{ }
 };
 
-- 
GitLab


From c22ce6d849423639b4b80d1b28edd383cb3048a9 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Wed, 20 Aug 2008 16:34:35 -0700
Subject: [PATCH 504/869] drivers/net/skfp/ess.c: fix compile warnings

  CC [M]  drivers/net/skfp/ess.o
drivers/net/skfp/ess.c: In function 'ess_send_response':
drivers/net/skfp/ess.c:513: warning: cast from pointer to integer of different size
drivers/net/skfp/ess.c: In function 'ess_send_alc_req':
drivers/net/skfp/ess.c:609: warning: cast from pointer to integer of different size
drivers/net/skfp/ess.c:639: warning: cast from pointer to integer of different size

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/skfp/ess.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index 889f9872461..a85efcfd9d0 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -510,7 +510,7 @@ static void ess_send_response(struct s_smc *smc, struct smt_header *sm,
 	chg->path.para.p_type = SMT_P320B ;
 	chg->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
 	chg->path.mib_index = SBAPATHINDEX ;
-	chg->path.path_pad = (u_short)NULL ;
+	chg->path.path_pad = 0;
 	chg->path.path_index = PRIMARY_RING ;
 
 	/* set P320F */
@@ -606,7 +606,7 @@ static void ess_send_alc_req(struct s_smc *smc)
 	req->path.para.p_type = SMT_P320B ;
 	req->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ;
 	req->path.mib_index = SBAPATHINDEX ;
-	req->path.path_pad = (u_short)NULL ;
+	req->path.path_pad = 0;
 	req->path.path_index = PRIMARY_RING ;
 
 	/* set P0017 */
@@ -636,7 +636,7 @@ static void ess_send_alc_req(struct s_smc *smc)
 	/* set P19 */
 	req->a_addr.para.p_type = SMT_P0019 ;
 	req->a_addr.para.p_len = sizeof(struct smt_p_0019) - PARA_LEN ;
-	req->a_addr.sba_pad = (u_short)NULL ;
+	req->a_addr.sba_pad = 0;
 	req->a_addr.alloc_addr = null_addr ;
 
 	/* set P1A */
-- 
GitLab


From 17fc7004a3f552b52274b6b2fbbebd7ff76dc1d5 Mon Sep 17 00:00:00 2001
From: Alexander Duyck <alexander.h.duyck@intel.com>
Date: Fri, 8 Aug 2008 16:51:26 -0700
Subject: [PATCH 505/869] igb: remove 82576 quad adapter

Disable support for device 8086:10E8.  Currently the result of loading the
driver with the device present causes system instability.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/igb/e1000_82575.c |  1 -
 drivers/net/igb/e1000_hw.h    |  1 -
 drivers/net/igb/igb_ethtool.c |  9 ---------
 drivers/net/igb/igb_main.c    | 11 -----------
 4 files changed, 22 deletions(-)

diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index bb823acc744..f5e2e7235fc 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -87,7 +87,6 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw)
 	case E1000_DEV_ID_82576:
 	case E1000_DEV_ID_82576_FIBER:
 	case E1000_DEV_ID_82576_SERDES:
-	case E1000_DEV_ID_82576_QUAD_COPPER:
 		mac->type = e1000_82576;
 		break;
 	default:
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index a65ccc3095c..99504a600a8 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -41,7 +41,6 @@ struct e1000_hw;
 #define E1000_DEV_ID_82576                    0x10C9
 #define E1000_DEV_ID_82576_FIBER              0x10E6
 #define E1000_DEV_ID_82576_SERDES             0x10E7
-#define E1000_DEV_ID_82576_QUAD_COPPER        0x10E8
 #define E1000_DEV_ID_82575EB_COPPER           0x10A7
 #define E1000_DEV_ID_82575EB_FIBER_SERDES     0x10A9
 #define E1000_DEV_ID_82575GB_QUAD_COPPER      0x10D6
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 3eb78a66f8b..58906c984be 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -1750,15 +1750,6 @@ static int igb_wol_exclusion(struct igb_adapter *adapter,
 		/* return success for non excluded adapter ports */
 		retval = 0;
 		break;
-	case E1000_DEV_ID_82576_QUAD_COPPER:
-		/* quad port adapters only support WoL on port A */
-		if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
-			wol->supported = 0;
-			break;
-		}
-		/* return success for non excluded adapter ports */
-		retval = 0;
-		break;
 	default:
 		/* dual port cards only support WoL on port A from now on
 		 * unless it was enabled in the eeprom for port B
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index e6eb13a303c..634c4c9d87b 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -61,7 +61,6 @@ static struct pci_device_id igb_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
-	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
@@ -1217,16 +1216,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 		if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
 			adapter->eeprom_wol = 0;
 		break;
-	case E1000_DEV_ID_82576_QUAD_COPPER:
-		/* if quad port adapter, disable WoL on all but port A */
-		if (global_quad_port_a != 0)
-			adapter->eeprom_wol = 0;
-		else
-			adapter->flags |= IGB_FLAG_QUAD_PORT_A;
-		/* Reset for multiple quad port adapters */
-		if (++global_quad_port_a == 4)
-			global_quad_port_a = 0;
-		break;
 	}
 
 	/* initialize the wol settings based on the eeprom settings */
-- 
GitLab


From 50f684b900de431729d6f77e69c941560936f275 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= <ilpo.jarvinen@helsinki.fi>
Date: Tue, 19 Aug 2008 10:32:06 +0300
Subject: [PATCH 506/869] atl1e: multistatement if missing braces
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Doesn't cause problems (yet) because err gets zeroed earlier.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/atl1e/atl1e_main.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 82d7be1655d..7685b995ff9 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -2232,10 +2232,11 @@ static int atl1e_resume(struct pci_dev *pdev)
 
 	AT_WRITE_REG(&adapter->hw, REG_WOL_CTRL, 0);
 
-	if (netif_running(netdev))
+	if (netif_running(netdev)) {
 		err = atl1e_request_irq(adapter);
 		if (err)
 			return err;
+	}
 
 	atl1e_reset_hw(&adapter->hw);
 
-- 
GitLab


From 82c26a9d117f0178b8c1b33429014b6d99c470f6 Mon Sep 17 00:00:00 2001
From: Jay Cliburn <jacliburn@bellsouth.net>
Date: Mon, 18 Aug 2008 19:28:13 -0500
Subject: [PATCH 507/869] atl1: disable TSO by default

The atl1 driver is causing stalled connections and file corruption
whenever TSO is enabled.  Two examples are here:

http://lkml.org/lkml/2008/7/15/325
http://lkml.org/lkml/2008/8/18/543

Disable TSO by default until we can determine the source of the
problem.

Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net>
cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/atlx/atl1.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index e6a7bb79d4d..e23ce77712f 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -3022,7 +3022,6 @@ static int __devinit atl1_probe(struct pci_dev *pdev,
 	netdev->features = NETIF_F_HW_CSUM;
 	netdev->features |= NETIF_F_SG;
 	netdev->features |= (NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX);
-	netdev->features |= NETIF_F_TSO;
 	netdev->features |= NETIF_F_LLTX;
 
 	/*
-- 
GitLab


From 95eacee870a521d2647f42c4f670cd65a145a6bd Mon Sep 17 00:00:00 2001
From: Denis Joseph Barrow <D.Barow@option.com>
Date: Tue, 19 Aug 2008 18:07:52 -0700
Subject: [PATCH 508/869] [netdrvr] hso: icon 322 detection fix

Fixes Icon-322 detection.

Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/hso.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 1b7cac77159..1131e10fb6a 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -397,7 +397,7 @@ static const struct usb_device_id hso_ids[] = {
 	{default_port_device(0x0af0, 0xc031)},	/* Icon-Edge */
 	{icon321_port_device(0x0af0, 0xd013)},	/* Module HSxPA */
 	{icon321_port_device(0x0af0, 0xd031)},	/* Icon-321 */
-	{default_port_device(0x0af0, 0xd033)},	/* Icon-322 */
+	{icon321_port_device(0x0af0, 0xd033)},	/* Icon-322 */
 	{USB_DEVICE(0x0af0, 0x7301)},		/* GE40x */
 	{USB_DEVICE(0x0af0, 0x7361)},		/* GE40x */
 	{USB_DEVICE(0x0af0, 0x7401)},		/* GI 0401 */
-- 
GitLab


From c213f286f2cf6590f83f541f66a625ee8d20c6f4 Mon Sep 17 00:00:00 2001
From: Denis Joseph Barrow <D.Barow@option.com>
Date: Tue, 19 Aug 2008 18:07:55 -0700
Subject: [PATCH 509/869] [netdrvr] hso: dev_kfree_skb crash fix

Fixes dev_kfree_skb happening too many times when hso_start_net_device
is called from hso_resume.

Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/hso.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 1131e10fb6a..6e42b5a8c22 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2613,6 +2613,7 @@ static int hso_resume(struct usb_interface *iface)
 					"Transmitting lingering data\n");
 				hso_net_start_xmit(hso_net->skb_tx_buf,
 						   hso_net->net);
+				hso_net->skb_tx_buf = NULL;
 			}
 			result = hso_start_net_device(network_table[i]);
 			if (result)
-- 
GitLab


From 45e15bb734e4e559ab32f26196e44d5cf1417f10 Mon Sep 17 00:00:00 2001
From: Santiago Leon <santil@us.ibm.com>
Date: Wed, 20 Aug 2008 13:09:19 -0600
Subject: [PATCH 510/869] ibmveth: fix bad UDP checksums

This patch fixes a ibmveth bug where bad UDP checksums are being transmitted
when checksum offloading is enabled.
The hypervisor does checksum offloading only on TCP packets, so ibmveth calls
skb_checksum_help() for any other protocol.  The bug happens because
the packet is being modified after the DMA map, so we would need a memory
barrier before making the hypervisor call.  Reordering the code so that the
DMA map happens after skb_checksum_help() has the additional advantage of
fixing a DMA map leak if skb_checksum_help() where to fail.

Signed-off-by: Santiago Leon <santil@us.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/ibmveth.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index a03fe1fb61c..c2d57f83608 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -904,8 +904,6 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 	unsigned long data_dma_addr;
 
 	desc.fields.flags_len = IBMVETH_BUF_VALID | skb->len;
-	data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
-				       skb->len, DMA_TO_DEVICE);
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL &&
 	    ip_hdr(skb)->protocol != IPPROTO_TCP && skb_checksum_help(skb)) {
@@ -924,6 +922,8 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		buf[1] = 0;
 	}
 
+	data_dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
+				       skb->len, DMA_TO_DEVICE);
 	if (dma_mapping_error(&adapter->vdev->dev, data_dma_addr)) {
 		if (!firmware_has_feature(FW_FEATURE_CMO))
 			ibmveth_error_printk("tx: unable to map xmit buffer\n");
@@ -932,6 +932,7 @@ static int ibmveth_start_xmit(struct sk_buff *skb, struct net_device *netdev)
 		desc.fields.address = adapter->bounce_buffer_dma;
 		tx_map_failed++;
 		used_bounce = 1;
+		wmb();
 	} else
 		desc.fields.address = data_dma_addr;
 
-- 
GitLab


From 6fc30db563c57e383ca2ec836d8c9208c52d265a Mon Sep 17 00:00:00 2001
From: Jeff Garzik <jeff@garzik.org>
Date: Wed, 27 Aug 2008 05:54:30 -0400
Subject: [PATCH 511/869] [netdrvr] smc91x: fix resource removal (null ptr
 deref)

Properly handle resource cleanup on unplug/exit.

Spotted by Jonathan Cameron

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/smc91x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index 2040965d772..24768c10cad 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -2255,7 +2255,7 @@ static int smc_drv_remove(struct platform_device *pdev)
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
 	if (!res)
-		platform_get_resource(pdev, IORESOURCE_MEM, 0);
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, SMC_IO_EXTENT);
 
 	free_netdev(ndev);
-- 
GitLab


From 8382cc1c2d0eb8918d3b71bf6cb8ac2e883f3e33 Mon Sep 17 00:00:00 2001
From: Arnd Bergmann <arnd@arndb.de>
Date: Sat, 23 Aug 2008 22:02:23 +0200
Subject: [PATCH 512/869] net/usb/mcs7830: new device IDs

This adds USB device IDs for MosChip 7730 and Sitecom LN030
to the mcs7830 driver. The IDs have been reported to work without
further modifications.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: David Brownell <david-b@pacbell.net>
Cc: Viktor Horvath <ViktorHorvath@gmx.net>
Cc: Robbert Wethmar <robbert@wethmar.nl>
Cc: Bart van der Klip <bklip@xs4all.nl>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/mcs7830.c | 23 ++++++++++++++++++++++-
 1 file changed, 22 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index c3d119f997f..ebf1332abaa 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -46,6 +46,10 @@
 
 #define MCS7830_VENDOR_ID	0x9710
 #define MCS7830_PRODUCT_ID	0x7830
+#define MCS7730_PRODUCT_ID	0x7730
+
+#define SITECOM_VENDOR_ID	0x0DF6
+#define LN_030_PRODUCT_ID	0x0021
 
 #define MCS7830_MII_ADVERTISE	(ADVERTISE_PAUSE_CAP | ADVERTISE_100FULL | \
 				 ADVERTISE_100HALF | ADVERTISE_10FULL | \
@@ -491,7 +495,16 @@ static int mcs7830_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 }
 
 static const struct driver_info moschip_info = {
-	.description	= "MOSCHIP 7830 usb-NET adapter",
+	.description	= "MOSCHIP 7830/7730 usb-NET adapter",
+	.bind		= mcs7830_bind,
+	.rx_fixup	= mcs7830_rx_fixup,
+	.flags		= FLAG_ETHER,
+	.in		= 1,
+	.out		= 2,
+};
+
+static const struct driver_info sitecom_info = {
+	.description    = "Sitecom LN-30 usb-NET adapter",
 	.bind		= mcs7830_bind,
 	.rx_fixup	= mcs7830_rx_fixup,
 	.flags		= FLAG_ETHER,
@@ -504,6 +517,14 @@ static const struct usb_device_id products[] = {
 		USB_DEVICE(MCS7830_VENDOR_ID, MCS7830_PRODUCT_ID),
 		.driver_info = (unsigned long) &moschip_info,
 	},
+	{
+		USB_DEVICE(MCS7830_VENDOR_ID, MCS7730_PRODUCT_ID),
+		.driver_info = (unsigned long) &moschip_info,
+	},
+	{
+		USB_DEVICE(SITECOM_VENDOR_ID, LN_030_PRODUCT_ID),
+		.driver_info = (unsigned long) &sitecom_info,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(usb, products);
-- 
GitLab


From 1025433147e635af9cd150676a097396cf666ddb Mon Sep 17 00:00:00 2001
From: Oliver Martin <oliver.martin@student.tuwien.ac.at>
Date: Sat, 23 Aug 2008 22:08:47 +0200
Subject: [PATCH 513/869] net/usb/mcs7830: add set_mac_address

Implement set_mac_address for mcs7830. This enables me to use it with my
cable modem.

Signed-off-by: Oliver Martin <oliver.martin@student.tuwien.ac.at>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/mcs7830.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c
index ebf1332abaa..ca9d00c1194 100644
--- a/drivers/net/usb/mcs7830.c
+++ b/drivers/net/usb/mcs7830.c
@@ -446,6 +446,29 @@ static struct ethtool_ops mcs7830_ethtool_ops = {
 	.nway_reset		= usbnet_nway_reset,
 };
 
+static int mcs7830_set_mac_address(struct net_device *netdev, void *p)
+{
+	int ret;
+	struct usbnet *dev = netdev_priv(netdev);
+	struct sockaddr *addr = p;
+
+	if (netif_running(netdev))
+		return -EBUSY;
+
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
+	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+	ret = mcs7830_set_reg(dev, HIF_REG_ETHERNET_ADDR, ETH_ALEN,
+			netdev->dev_addr);
+
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
 static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
 {
 	struct net_device *net = dev->net;
@@ -459,6 +482,7 @@ static int mcs7830_bind(struct usbnet *dev, struct usb_interface *udev)
 	net->ethtool_ops = &mcs7830_ethtool_ops;
 	net->set_multicast_list = mcs7830_set_multicast;
 	mcs7830_set_multicast(net);
+	net->set_mac_address = mcs7830_set_mac_address;
 
 	/* reserve space for the status byte on rx */
 	dev->rx_urb_size = ETH_FRAME_LEN + 1;
-- 
GitLab


From edcfe5f7e307846e578fb88d69fa27051fded0ab Mon Sep 17 00:00:00 2001
From: Ayaz Abdulla <aabdulla@nvidia.com>
Date: Wed, 20 Aug 2008 16:34:37 -0700
Subject: [PATCH 514/869] forcedeth: fix checksum flag

Fix the checksum feature advertised in device flags.  The hardware support
TCP/UDP over IPv4 and TCP/UDP over IPv6 (without IPv6 extension headers).
However, the kernel feature flags do not distinguish IPv6 with/without
extension headers.

Therefore, the driver needs to use NETIF_F_IP_CSUM instead of
NETIF_F_HW_CSUM since the latter includes all IPv6 packets.

A future patch can be created to check for extension headers and perform
software checksum calculation.

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Manfred Spraul <manfred@colorfullife.com
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/forcedeth.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 053971e5fc9..331b86b01fa 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5522,7 +5522,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	if (id->driver_data & DEV_HAS_CHECKSUM) {
 		np->rx_csum = 1;
 		np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
-		dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
+		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
 		dev->features |= NETIF_F_TSO;
 	}
 
@@ -5835,7 +5835,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 
 	dev_printk(KERN_INFO, &pci_dev->dev, "%s%s%s%s%s%s%s%s%s%sdesc-v%u\n",
 		   dev->features & NETIF_F_HIGHDMA ? "highdma " : "",
-		   dev->features & (NETIF_F_HW_CSUM | NETIF_F_SG) ?
+		   dev->features & (NETIF_F_IP_CSUM | NETIF_F_SG) ?
 		   	"csum " : "",
 		   dev->features & (NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX) ?
 		   	"vlan " : "",
-- 
GitLab


From ab9399059bb85a94758f42fb25607e440e926cc6 Mon Sep 17 00:00:00 2001
From: Sebastian Siewior <bigeasy@linutronix.de>
Date: Tue, 19 Aug 2008 21:12:45 +0200
Subject: [PATCH 515/869] net: don't grab a mutex within a timer context in
 gianfar

I got the following backtrace while network was unavailble:

|NETDEV WATCHDOG: eth0: transmit timed out
|BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/kernel/mutex.c:87
|in_atomic():1, irqs_disabled():0
|Call Trace:
|[c0383d90] [c0006dd8] show_stack+0x48/0x184 (unreliable)
|[c0383db0] [c001e938] __might_sleep+0xe0/0xf4
|[c0383dc0] [c025a43c] mutex_lock+0x24/0x3c
|[c0383de0] [c019005c] phy_stop+0x20/0x70
|[c0383df0] [c018d4ec] stop_gfar+0x28/0xf4
|[c0383e10] [c018e8c4] gfar_timeout+0x30/0x60
|[c0383e20] [c01fe7c0] dev_watchdog+0xa8/0x144
|[c0383e30] [c002f93c] run_timer_softirq+0x148/0x1c8
|[c0383e60] [c002b084] __do_softirq+0x5c/0xc4
|[c0383e80] [c00046fc] do_softirq+0x3c/0x54
|[c0383e90] [c002ac60] irq_exit+0x3c/0x5c
|[c0383ea0] [c000b378] timer_interrupt+0xe0/0xf8
|[c0383ec0] [c000e5ac] ret_from_except+0x0/0x18
|[c0383f80] [c000804c] cpu_idle+0xcc/0xdc
|[c0383fa0] [c025c07c] etext+0x7c/0x90
|[c0383fc0] [c0338960] start_kernel+0x294/0x2a8
|[c0383ff0] [c00003dc] skpinv+0x304/0x340
|------------[ cut here ]------------

The phylock was once a spinlock but got changed into a mutex via
commit 35b5f6b1a aka [PHYLIB: Locking fixes for PHY I/O potentially sleeping]

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/gianfar.c | 22 ++++++++++++++++++----
 drivers/net/gianfar.h |  1 +
 2 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 999d6916827..4320a983a58 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -105,6 +105,7 @@ const char gfar_driver_version[] = "1.3";
 
 static int gfar_enet_open(struct net_device *dev);
 static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void gfar_reset_task(struct work_struct *work);
 static void gfar_timeout(struct net_device *dev);
 static int gfar_close(struct net_device *dev);
 struct sk_buff *gfar_new_skb(struct net_device *dev);
@@ -209,6 +210,7 @@ static int gfar_probe(struct platform_device *pdev)
 	spin_lock_init(&priv->txlock);
 	spin_lock_init(&priv->rxlock);
 	spin_lock_init(&priv->bflock);
+	INIT_WORK(&priv->reset_task, gfar_reset_task);
 
 	platform_set_drvdata(pdev, dev);
 
@@ -1212,6 +1214,7 @@ static int gfar_close(struct net_device *dev)
 
 	napi_disable(&priv->napi);
 
+	cancel_work_sync(&priv->reset_task);
 	stop_gfar(dev);
 
 	/* Disconnect from the PHY */
@@ -1326,13 +1329,16 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
 	return 0;
 }
 
-/* gfar_timeout gets called when a packet has not been
+/* gfar_reset_task gets scheduled when a packet has not been
  * transmitted after a set amount of time.
  * For now, assume that clearing out all the structures, and
- * starting over will fix the problem. */
-static void gfar_timeout(struct net_device *dev)
+ * starting over will fix the problem.
+ */
+static void gfar_reset_task(struct work_struct *work)
 {
-	dev->stats.tx_errors++;
+	struct gfar_private *priv = container_of(work, struct gfar_private,
+			reset_task);
+	struct net_device *dev = priv->dev;
 
 	if (dev->flags & IFF_UP) {
 		stop_gfar(dev);
@@ -1342,6 +1348,14 @@ static void gfar_timeout(struct net_device *dev)
 	netif_tx_schedule_all(dev);
 }
 
+static void gfar_timeout(struct net_device *dev)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+
+	dev->stats.tx_errors++;
+	schedule_work(&priv->reset_task);
+}
+
 /* Interrupt Handler for Transmit complete */
 static int gfar_clean_tx_ring(struct net_device *dev)
 {
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index d59df98bd63..f46e9b63af1 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -756,6 +756,7 @@ struct gfar_private {
 
 	uint32_t msg_enable;
 
+	struct work_struct reset_task;
 	/* Network Statistics */
 	struct gfar_extra_stats extra_stats;
 };
-- 
GitLab


From e8296582783a9f3bf75dbeb98dfdae15fd45c008 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Mon, 18 Aug 2008 07:29:23 +1000
Subject: [PATCH 516/869] ibm_newemac: Don't call dev_mc_add() before device is
 registered

We must not call dev_mc_add() from within our HW configure which happens
before we initialize and register the netdev. Do it in open() instead.

Thanks to Sebastian Siewior for tracking it down.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/ibm_newemac/core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 2e720f26ca8..ccd9d9058f6 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -663,9 +663,6 @@ static int emac_configure(struct emac_instance *dev)
 	if (emac_phy_gpcs(dev->phy.mode))
 		emac_mii_reset_phy(&dev->phy);
 
-	/* Required for Pause packet support in EMAC */
-	dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1);
-
 	return 0;
 }
 
@@ -1150,6 +1147,9 @@ static int emac_open(struct net_device *ndev)
 	} else
 		netif_carrier_on(dev->ndev);
 
+	/* Required for Pause packet support in EMAC */
+	dev_mc_add(ndev, default_mcast_addr, sizeof(default_mcast_addr), 1);
+
 	emac_configure(dev);
 	mal_poll_add(dev->mal, &dev->commac);
 	mal_enable_tx_channel(dev->mal, dev->mal_tx_chan);
-- 
GitLab


From 211cd45ac71dcd40d473fddf9a49cb1085173cb1 Mon Sep 17 00:00:00 2001
From: Ursula Braun <ursula.braun@de.ibm.com>
Date: Fri, 15 Aug 2008 08:02:58 +0200
Subject: [PATCH 517/869] qeth: use -EOPNOTSUPP instead of -ENOTSUPP.

return value -ENOTSUPP is not valid in userspace context, use
-EOPNOTSUPP instead.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/s390/net/qeth_l3_sys.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index ac1993708ae..210ddb63974 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -136,7 +136,7 @@ static ssize_t qeth_l3_dev_route6_store(struct device *dev,
 		return -EINVAL;
 
 	if (!qeth_is_supported(card, IPA_IPV6)) {
-		return -ENOTSUPP;
+		return -EOPNOTSUPP;
 	}
 
 	return qeth_l3_dev_route_store(card, &card->options.route6,
-- 
GitLab


From 7db2266a374d66f5ac85334c922cb37d76939cc5 Mon Sep 17 00:00:00 2001
From: Frank Blaschka <frank.blaschka@de.ibm.com>
Date: Fri, 15 Aug 2008 08:02:59 +0200
Subject: [PATCH 518/869] qeth: l2 write unicast list to hardware

In case the netdev unicast list contains additional entries we have
to register/deregister them.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/s390/net/qeth_core.h    |  1 +
 drivers/s390/net/qeth_l2_main.c | 27 ++++++++++++++++++++++-----
 2 files changed, 23 insertions(+), 5 deletions(-)

diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 80971c21ea1..bf8a75c92f2 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -689,6 +689,7 @@ struct qeth_mc_mac {
 	struct list_head list;
 	__u8 mc_addr[MAX_ADDR_LEN];
 	unsigned char mc_addrlen;
+	int is_vmac;
 };
 
 struct qeth_card {
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index b3cee032f57..3ac3cc1e03c 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -177,9 +177,10 @@ static int qeth_l2_send_delgroupmac(struct qeth_card *card, __u8 *mac)
 					  qeth_l2_send_delgroupmac_cb);
 }
 
-static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac)
+static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac, int vmac)
 {
 	struct qeth_mc_mac *mc;
+	int rc;
 
 	mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC);
 
@@ -188,8 +189,16 @@ static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac)
 
 	memcpy(mc->mc_addr, mac, OSA_ADDR_LEN);
 	mc->mc_addrlen = OSA_ADDR_LEN;
+	mc->is_vmac = vmac;
+
+	if (vmac) {
+		rc = qeth_l2_send_setdelmac(card, mac, IPA_CMD_SETVMAC,
+					NULL);
+	} else {
+		rc = qeth_l2_send_setgroupmac(card, mac);
+	}
 
-	if (!qeth_l2_send_setgroupmac(card, mac))
+	if (!rc)
 		list_add_tail(&mc->list, &card->mc_list);
 	else
 		kfree(mc);
@@ -201,7 +210,11 @@ static void qeth_l2_del_all_mc(struct qeth_card *card)
 
 	spin_lock_bh(&card->mclock);
 	list_for_each_entry_safe(mc, tmp, &card->mc_list, list) {
-		qeth_l2_send_delgroupmac(card, mc->mc_addr);
+		if (mc->is_vmac)
+			qeth_l2_send_setdelmac(card, mc->mc_addr,
+					IPA_CMD_DELVMAC, NULL);
+		else
+			qeth_l2_send_delgroupmac(card, mc->mc_addr);
 		list_del(&mc->list);
 		kfree(mc);
 	}
@@ -590,7 +603,7 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p)
 static void qeth_l2_set_multicast_list(struct net_device *dev)
 {
 	struct qeth_card *card = dev->ml_priv;
-	struct dev_mc_list *dm;
+	struct dev_addr_list *dm;
 
 	if (card->info.type == QETH_CARD_TYPE_OSN)
 		return ;
@@ -599,7 +612,11 @@ static void qeth_l2_set_multicast_list(struct net_device *dev)
 	qeth_l2_del_all_mc(card);
 	spin_lock_bh(&card->mclock);
 	for (dm = dev->mc_list; dm; dm = dm->next)
-		qeth_l2_add_mc(card, dm->dmi_addr);
+		qeth_l2_add_mc(card, dm->da_addr, 0);
+
+	for (dm = dev->uc_list; dm; dm = dm->next)
+		qeth_l2_add_mc(card, dm->da_addr, 1);
+
 	spin_unlock_bh(&card->mclock);
 	if (!qeth_adp_supported(card, IPA_SETADP_SET_PROMISC_MODE))
 		return;
-- 
GitLab


From bd8774c841aa5162d1d6837b3d21f4dcee71f36a Mon Sep 17 00:00:00 2001
From: Frank Blaschka <frank.blaschka@de.ibm.com>
Date: Fri, 15 Aug 2008 08:03:00 +0200
Subject: [PATCH 519/869] qeth: preallocated header account offset

When a preallocated header qdio buffer is filled we have to account
the offset for the data length.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/s390/net/qeth_core_main.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index bd420d1b9a0..c7ab1b86451 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -3024,7 +3024,7 @@ static inline void __qeth_fill_buffer(struct sk_buff *skb,
 	struct qdio_buffer *buffer, int is_tso, int *next_element_to_fill,
 	int offset)
 {
-	int length = skb->len;
+	int length = skb->len - offset;
 	int length_here;
 	int element;
 	char *data;
-- 
GitLab


From 17393dd67c06c3912ff47b31268b648929715336 Mon Sep 17 00:00:00 2001
From: Jiri Slaby <jirislaby@gmail.com>
Date: Thu, 14 Aug 2008 18:27:23 +0200
Subject: [PATCH 520/869] e100, fix iomap read

There were 2 omitted readb's used on an iomap space. eliminate them
by using ioread8 instead.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Bruce Allan <bruce.w.allan@intel.com>
Cc: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Cc: John Ronciak <john.ronciak@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/e100.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 19d32a227be..453115acaad 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1838,7 +1838,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 		if ((le16_to_cpu(rfd->command) & cb_el) &&
 		    (RU_RUNNING == nic->ru_running))
 
-			if (readb(&nic->csr->scb.status) & rus_no_res)
+			if (ioread8(&nic->csr->scb.status) & rus_no_res)
 				nic->ru_running = RU_SUSPENDED;
 		return -ENODATA;
 	}
@@ -1861,7 +1861,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
 	if ((le16_to_cpu(rfd->command) & cb_el) &&
 	    (RU_RUNNING == nic->ru_running)) {
 
-	    if (readb(&nic->csr->scb.status) & rus_no_res)
+	    if (ioread8(&nic->csr->scb.status) & rus_no_res)
 		nic->ru_running = RU_SUSPENDED;
 	}
 
-- 
GitLab


From f2455eb176ac87081bbfc9a44b21c7cd2bc1967e Mon Sep 17 00:00:00 2001
From: Eugene Teo <eugeneteo@kernel.sg>
Date: Wed, 27 Aug 2008 04:50:30 -0700
Subject: [PATCH 521/869] wan: Missing capability checks in sbni_ioctl()

There are missing capability checks in the following code:

1300 static int
1301 sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd)
1302 {
[...]
1319     case  SIOCDEVRESINSTATS :
1320         if( current->euid != 0 )    /* root only */
1321             return  -EPERM;
[...]
1336     case  SIOCDEVSHWSTATE :
1337         if( current->euid != 0 )    /* root only */
1338             return  -EPERM;
[...]
1357     case  SIOCDEVENSLAVE :
1358         if( current->euid != 0 )    /* root only */
1359             return  -EPERM;
[...]
1372     case  SIOCDEVEMANSIPATE :
1373         if( current->euid != 0 )    /* root only */
1374             return  -EPERM;

Here's my proposed fix:

Missing capability checks.

Signed-off-by: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/wan/sbni.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wan/sbni.c b/drivers/net/wan/sbni.c
index e59255a155a..6596cd0742b 100644
--- a/drivers/net/wan/sbni.c
+++ b/drivers/net/wan/sbni.c
@@ -1317,7 +1317,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 		break;
 
 	case  SIOCDEVRESINSTATS :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 		memset( &nl->in_stats, 0, sizeof(struct sbni_in_stats) );
 		break;
@@ -1334,7 +1334,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 		break;
 
 	case  SIOCDEVSHWSTATE :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 
 		spin_lock( &nl->lock );
@@ -1355,7 +1355,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 #ifdef CONFIG_SBNI_MULTILINE
 
 	case  SIOCDEVENSLAVE :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 
 		if (copy_from_user( slave_name, ifr->ifr_data, sizeof slave_name ))
@@ -1370,7 +1370,7 @@ sbni_ioctl( struct net_device  *dev,  struct ifreq  *ifr,  int  cmd )
 		return  enslave( dev, slave_dev );
 
 	case  SIOCDEVEMANSIPATE :
-		if( current->euid != 0 )	/* root only */
+		if (!capable(CAP_NET_ADMIN))
 			return  -EPERM;
 
 		return  emancipate( dev );
-- 
GitLab


From b6a7e4c032d8ec712f48cf35145a564aa6503eb7 Mon Sep 17 00:00:00 2001
From: Dirk Behme <dirk.behme@googlemail.com>
Date: Sat, 15 Dec 2007 07:47:46 +0100
Subject: [PATCH 522/869] [ARM] OMAP: Change mailing list for OMAP in
 MAINTAINERS

OMAP has now a list at vger.

Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 28c69aaefcd..c4ca99cf80d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4005,7 +4005,7 @@ S:      Maintained
 
 TI OMAP MMC INTERFACE DRIVER
 P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
-M:	linux-omap-open-source@linux.omap.com (subscribers only)
+M:	linux-omap@vger.kernel.org
 W:	http://linux.omap.com
 W:	http://www.muru.com/linux/omap/
 S:	Maintained
-- 
GitLab


From 9c2d015712ff1deb7ae5f95ef1fd9b5557520bc1 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 27 Aug 2008 14:22:13 +0100
Subject: [PATCH 523/869] [ARM] OMAP: Add and update OMAP default configuration
 files

Update omap_h2_1610 and omap_osk_5912 default configurations.

Add ams delta, n770, omap 2430sdp, apollon_2420, generic 1510, 1610,
1710, 2420, h4 2420, innovator 1510 and 1610, perseus2 730, palte,
palmtt, palmz71 and sx1 default configurations.

Pulled out of the omap zoom tree.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/configs/ams_delta_defconfig          | 1314 +++++++++++++++
 arch/arm/configs/n770_defconfig               | 1421 +++++++++++++++++
 arch/arm/configs/omap_2430sdp_defconfig       | 1304 +++++++++++++++
 arch/arm/configs/omap_apollon_2420_defconfig  |  962 +++++++++++
 arch/arm/configs/omap_generic_1510_defconfig  | 1172 ++++++++++++++
 arch/arm/configs/omap_generic_1610_defconfig  | 1178 ++++++++++++++
 arch/arm/configs/omap_generic_1710_defconfig  | 1088 +++++++++++++
 arch/arm/configs/omap_generic_2420_defconfig  |  655 ++++++++
 arch/arm/configs/omap_h2_1610_defconfig       |  509 ++++--
 arch/arm/configs/omap_h4_2420_defconfig       | 1120 +++++++++++++
 .../arm/configs/omap_innovator_1510_defconfig | 1253 +++++++++++++++
 .../arm/configs/omap_innovator_1610_defconfig |  839 ++++++++++
 arch/arm/configs/omap_osk_5912_defconfig      |  169 +-
 arch/arm/configs/omap_perseus2_730_defconfig  |  928 +++++++++++
 arch/arm/configs/palmte_defconfig             |  761 +++++++++
 arch/arm/configs/palmtt_defconfig             |  844 ++++++++++
 arch/arm/configs/palmz71_defconfig            |  891 +++++++++++
 arch/arm/configs/sx1_defconfig                | 1118 +++++++++++++
 18 files changed, 17308 insertions(+), 218 deletions(-)
 create mode 100644 arch/arm/configs/ams_delta_defconfig
 create mode 100644 arch/arm/configs/n770_defconfig
 create mode 100644 arch/arm/configs/omap_2430sdp_defconfig
 create mode 100644 arch/arm/configs/omap_apollon_2420_defconfig
 create mode 100644 arch/arm/configs/omap_generic_1510_defconfig
 create mode 100644 arch/arm/configs/omap_generic_1610_defconfig
 create mode 100644 arch/arm/configs/omap_generic_1710_defconfig
 create mode 100644 arch/arm/configs/omap_generic_2420_defconfig
 create mode 100644 arch/arm/configs/omap_h4_2420_defconfig
 create mode 100644 arch/arm/configs/omap_innovator_1510_defconfig
 create mode 100644 arch/arm/configs/omap_innovator_1610_defconfig
 create mode 100644 arch/arm/configs/omap_perseus2_730_defconfig
 create mode 100644 arch/arm/configs/palmte_defconfig
 create mode 100644 arch/arm/configs/palmtt_defconfig
 create mode 100644 arch/arm/configs/palmz71_defconfig
 create mode 100644 arch/arm/configs/sx1_defconfig

diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
new file mode 100644
index 00000000000..2c4aa11f0b0
--- /dev/null
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 04:28:32 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=m
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=m
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+CONFIG_MACH_AMS_DELTA=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+CONFIG_OMAP_ARM_150MHZ=y
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 initrd=0x11c00000,4M"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_AMS_DELTA=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_ESP_CORE is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_AMS_DELTA=y
+# CONFIG_LEDS_OMAP_DEBUG is not set
+# CONFIG_LEDS_OMAP is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_CLEAN_4x6 is not set
+# CONFIG_FONT_CLEAN_5x8 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
new file mode 100644
index 00000000000..568ef1770d5
--- /dev/null
+++ b/arch/arm/configs/n770_defconfig
@@ -0,0 +1,1421 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24-rc8-omap1
+# Fri Jan 18 10:21:06 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_BOOT_TAG=y
+CONFIG_OMAP_BOOT_REASON=y
+CONFIG_OMAP_COMPONENT_VERSION=y
+CONFIG_OMAP_GPIO_SWITCH=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_STI=y
+CONFIG_OMAP_STI_CONSOLE=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+CONFIG_MACH_NOKIA770=y
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+CONFIG_OMAP_ARM_216MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 time"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=y
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+CONFIG_BT_HCIBRF6150=y
+# CONFIG_BT_HCIH4P is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP_HW=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=y
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+# CONFIG_USB_NET_AX8817X is not set
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_TLV320AIC23=y
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCDC_EXTERNAL=y
+CONFIG_FB_OMAP_LCDC_HWA742=y
+# CONFIG_FB_OMAP_LCDC_BLIZZARD is not set
+CONFIG_FB_OMAP_MANUAL_UPDATE=y
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_DUMMY=y
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_OMAP_AIC23=y
+# CONFIG_SND_OMAP_TSC2101 is not set
+# CONFIG_SND_SX1 is not set
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# SoC Audio support for SuperH
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+# CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# CBUS support
+#
+CONFIG_CBUS=y
+CONFIG_CBUS_TAHVO=y
+CONFIG_CBUS_TAHVO_USER=y
+CONFIG_CBUS_TAHVO_USB=y
+# CONFIG_CBUS_TAHVO_USB_HOST_BY_DEFAULT is not set
+CONFIG_CBUS_RETU=y
+CONFIG_CBUS_RETU_USER=y
+CONFIG_CBUS_RETU_POWERBUTTON=y
+CONFIG_CBUS_RETU_RTC=y
+CONFIG_CBUS_RETU_WDT=y
+# CONFIG_CBUS_RETU_HEADSET is not set
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_LOWMEM is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
new file mode 100644
index 00000000000..b0617c0da2a
--- /dev/null
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -0,0 +1,1304 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:47:37 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+# CONFIG_OMAP_MUX_WARNINGS is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+# CONFIG_ARCH_OMAP2420 is not set
+CONFIG_ARCH_OMAP2430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+CONFIG_MACH_OMAP_2430SDP=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_OMAP is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_GPIO=y
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_MENELAUS is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_OMAP24XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 243x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP_HS=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
new file mode 100644
index 00000000000..bb39dfc72d6
--- /dev/null
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -0,0 +1,962 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 12:07:29 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+CONFIG_MACH_OMAP_APOLLON=y
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OMAP2 is not set
+# CONFIG_MTD_ONENAND_OTP is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HID is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
new file mode 100644
index 00000000000..4b1c252f209
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -0,0 +1,1172 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 12:20:19 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+# CONFIG_USB_ALI_M5632 is not set
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
new file mode 100644
index 00000000000..fc66f019d56
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -0,0 +1,1178 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 13:01:27 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS2,115200 root=0803 ro init=/bin/sh"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig
new file mode 100644
index 00000000000..0a00a708a4f
--- /dev/null
+++ b/arch/arm/configs/omap_generic_1710_defconfig
@@ -0,0 +1,1088 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 13:02:08 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=tty0 console=ttyS2,115200 root=0801"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+CONFIG_ARTHUR=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+# CONFIG_USB_AN2720 is not set
+# CONFIG_USB_BELKIN is not set
+# CONFIG_USB_ARMLINUX is not set
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OMAP=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+CONFIG_NLS_CODEPAGE_852=y
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_LOWMEM is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig
new file mode 100644
index 00000000000..cf4073b47aa
--- /dev/null
+++ b/arch/arm/configs/omap_generic_2420_defconfig
@@ -0,0 +1,655 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:44:48 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_USER_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_DSP is not set
+CONFIG_MACH_OMAP_GENERIC=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+# CONFIG_MACH_OMAP_H4 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x10C08000
+CONFIG_ZBOOT_ROM_BSS=0x10200000
+# CONFIG_ZBOOT_ROM is not set
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 323c1deeb95..c03507202f3 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Mar  3 03:39:48 2008
+# Linux kernel version: 2.6.25-rc2-omap1
+# Wed Feb 20 17:12:36 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -31,7 +31,6 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
@@ -50,7 +49,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_NAMESPACES=y
 # CONFIG_UTS_NS is not set
@@ -65,6 +64,7 @@ CONFIG_SYSCTL=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -165,20 +165,28 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
 # CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
 
 #
 # OMAP Feature Selections
 #
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 # CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+CONFIG_OMAP_GPIO_SWITCH=y
 CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
-# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
 CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
@@ -206,10 +214,10 @@ CONFIG_MACH_OMAP_H2=y
 #
 # CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
 # CONFIG_OMAP_ARM_216MHZ is not set
-CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_192MHZ is not set
 # CONFIG_OMAP_ARM_168MHZ is not set
 # CONFIG_OMAP_ARM_120MHZ is not set
-# CONFIG_OMAP_ARM_60MHZ is not set
+CONFIG_OMAP_ARM_60MHZ=y
 # CONFIG_OMAP_ARM_30MHZ is not set
 
 #
@@ -227,6 +235,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -257,10 +266,9 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
+# CONFIG_PREEMPT is not set
 CONFIG_HZ=128
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -275,7 +283,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_LEDS is not set
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -283,7 +292,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x10600000,8M ramdisk_size=8192"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 # CONFIG_ATAGS_PROC is not set
@@ -291,20 +300,7 @@ CONFIG_CMDLINE="mem=32M console=ttyS0,115200n8 root=0801 ro init=/bin/sh"
 #
 # CPU Frequency scaling
 #
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ is not set
 
 #
 # Floating point emulation
@@ -322,8 +318,9 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
 
 #
 # Power management options
@@ -433,21 +430,102 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+CONFIG_DEBUG_DRIVER=y
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-CONFIG_ATA_OVER_ETH=m
+# CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -457,42 +535,9 @@ CONFIG_MISC_DEVICES=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
@@ -509,6 +554,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -523,6 +569,15 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 CONFIG_PPP=y
 # CONFIG_PPP_MULTILINK is not set
@@ -612,7 +667,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
 # CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
@@ -638,6 +694,7 @@ CONFIG_I2C_OMAP=y
 # CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -647,8 +704,10 @@ CONFIG_I2C_OMAP=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
+CONFIG_ISP1301_OMAP=y
 CONFIG_TPS65010=y
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -659,8 +718,26 @@ CONFIG_TPS65010=y
 #
 # SPI support
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_TSC2101=y
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -673,7 +750,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -683,6 +759,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
 # CONFIG_SENSORS_LM75 is not set
 # CONFIG_SENSORS_LM77 is not set
 # CONFIG_SENSORS_LM78 is not set
@@ -712,6 +789,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_TSC210X is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
@@ -722,6 +800,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # CONFIG_SOFT_WATCHDOG is not set
 # CONFIG_OMAP_WATCHDOG is not set
 
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
 #
 # Sonics Silicon Backplane
 #
@@ -740,6 +823,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -749,9 +833,9 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -769,7 +853,11 @@ CONFIG_FB_MODE_HELPERS=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -785,17 +873,9 @@ CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
+# CONFIG_FONTS is not set
 CONFIG_FONT_8x8=y
 CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -804,37 +884,204 @@ CONFIG_LOGO_LINUX_CLUT224=y
 #
 # Sound
 #
-CONFIG_SOUND=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Advanced Linux Sound Architecture
+# USB Input Devices
 #
-# CONFIG_SND is not set
+# CONFIG_USB_HID is not set
 
 #
-# Open Sound System
+# USB HID Boot Protocol drivers
 #
-CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-CONFIG_HID_DEBUG=y
-# CONFIG_HIDRAW is not set
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+CONFIG_USB_OTG=y
+CONFIG_USB_OTG_WHITELIST=y
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_SPI is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+# CONFIG_OMAP_DSP is not set
 
 #
 # File systems
@@ -894,6 +1141,17 @@ CONFIG_SYSFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -904,19 +1162,16 @@ CONFIG_ROMFS_FS=y
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
 # CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
@@ -981,11 +1236,38 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
@@ -994,31 +1276,29 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
 # CONFIG_CRYPTO_SEQIV is not set
-CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_XTS is not set
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_GCM is not set
 # CONFIG_CRYPTO_CCM is not set
 # CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
@@ -1052,6 +1332,7 @@ CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
new file mode 100644
index 00000000000..5bc89185a64
--- /dev/null
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -0,0 +1,1120 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:44:58 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2=y
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+CONFIG_OMAP_DEBUG_DEVICES=y
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP24XX=y
+CONFIG_ARCH_OMAP2420=y
+# CONFIG_ARCH_OMAP2430 is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_NOKIA_N800 is not set
+CONFIG_MACH_OMAP_H4=y
+# CONFIG_MACH_OMAP_H4_TUSB is not set
+# CONFIG_MACH_OMAP_H4_OTG is not set
+# CONFIG_MACH_OMAP2_H4_USB1 is not set
+# CONFIG_MACH_OMAP_APOLLON is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+# CONFIG_MACH_OMAP_2430SDP is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V6=y
+# CONFIG_CPU_32v6K is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw console=ttyS0,115200n8 initrd=0x80600000,8M ramdisk_size=8192"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=y
+CONFIG_IRCOMM=y
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_OMAP_IR=y
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+CONFIG_GPIOEXPANDER_OMAP=y
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_MENELAUS=y
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
new file mode 100644
index 00000000000..55b2611bd90
--- /dev/null
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -0,0 +1,1253 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:02 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_INNOVATOR=y
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 root=/dev/nfs ip=bootp noinitrd"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET_MII=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+# CONFIG_USB_NET_CDC_SUBSET is not set
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=y
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+CONFIG_OMAP_PS2=m
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_OMAP is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_PERSIST is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig
new file mode 100644
index 00000000000..95d9f2be53e
--- /dev/null
+++ b/arch/arm/configs/omap_innovator_1610_defconfig
@@ -0,0 +1,839 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:05 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_DM_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+# CONFIG_ARCH_OMAP15XX is not set
+CONFIG_ARCH_OMAP16XX=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_INNOVATOR=y
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
+# CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_216MHZ is not set
+CONFIG_OMAP_ARM_192MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=tty0 console=ttyS0,115200 initrd=0x10200000,8M root=/dev/ram0 rw"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_OMAP=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index d4ca5e6e4ff..b68e0144cab 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc3
-# Mon Mar  3 03:35:17 2008
+# Linux kernel version: 2.6.24-rc3-omap1
+# Fri Nov 23 12:24:12 2007
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -21,7 +21,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -40,22 +39,17 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
-CONFIG_NAMESPACES=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -69,26 +63,18 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -116,8 +102,6 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System Type
@@ -146,7 +130,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -156,7 +139,6 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM7X00A is not set
 
 #
 # TI OMAP Implementations
@@ -164,16 +146,22 @@ CONFIG_ARCH_OMAP=y
 CONFIG_ARCH_OMAP_OTG=y
 CONFIG_ARCH_OMAP1=y
 # CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
 
 #
 # OMAP Feature Selections
 #
+CONFIG_OMAP_DEBUG_SRAM_PATCH=y
 CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
 CONFIG_OMAP_MUX=y
 # CONFIG_OMAP_MUX_DEBUG is not set
 CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_STI is not set
 CONFIG_OMAP_MCBSP=y
 # CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -182,6 +170,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
 CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
 
 #
 # OMAP Core Type
@@ -193,13 +182,13 @@ CONFIG_ARCH_OMAP16XX=y
 #
 # OMAP Board Type
 #
-CONFIG_MACH_OMAP_INNOVATOR=y
-CONFIG_MACH_OMAP_H2=y
-CONFIG_MACH_OMAP_H3=y
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_OMAP_H2 is not set
+# CONFIG_MACH_OMAP_H3 is not set
 CONFIG_MACH_OMAP_OSK=y
 # CONFIG_OMAP_OSK_MISTRAL is not set
-CONFIG_MACH_NOKIA770=y
-CONFIG_MACH_OMAP_GENERIC=y
+# CONFIG_MACH_NOKIA770 is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
 
 #
 # OMAP CPU Speed
@@ -227,6 +216,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -264,12 +254,11 @@ CONFIG_OMAP_CF=y
 #
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
+# CONFIG_HIGH_RES_TIMERS is not set
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=128
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -295,7 +284,6 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x10400000,8M root=/dev/ram0 rw"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
-# CONFIG_ATAGS_PROC is not set
 
 #
 # CPU Frequency scaling
@@ -320,6 +308,7 @@ CONFIG_FPE_NWFPE=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
 
 #
 # Power management options
@@ -328,10 +317,9 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
 CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -348,7 +336,6 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -404,7 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -517,13 +503,11 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_BLK_DEV_XIP is not set
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-CONFIG_HAVE_IDE=y
 CONFIG_IDE=m
 CONFIG_BLK_DEV_IDE=m
 
@@ -545,6 +529,7 @@ CONFIG_IDE_PROC_FS=y
 #
 # CONFIG_IDE_GENERIC is not set
 # CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 CONFIG_IDE_ARCH_OBSOLETE_INIT=y
 # CONFIG_BLK_DEV_HD is not set
@@ -578,7 +563,6 @@ CONFIG_SMC91X=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -600,6 +584,7 @@ CONFIG_PPP_MULTILINK=y
 # CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
 CONFIG_SLHC=y
+# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -696,7 +681,6 @@ CONFIG_HW_RANDOM_OMAP=m
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
-# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
@@ -724,13 +708,17 @@ CONFIG_I2C_OMAP=y
 #
 # Miscellaneous I2C Chip support
 #
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TPS65010=y
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_GPIOEXPANDER_OMAP is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -755,7 +743,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -783,7 +770,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
@@ -791,7 +777,6 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
@@ -807,7 +792,6 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
 
 #
 # Multimedia devices
@@ -822,11 +806,11 @@ CONFIG_DAB=y
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -844,7 +828,11 @@ CONFIG_FB_MODE_HELPERS=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_OMAP is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -890,15 +878,28 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# USB Gadget Support
+#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
 #
 # File systems
 #
@@ -913,10 +914,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_DNOTIFY=y
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -970,10 +973,8 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1043,6 +1044,9 @@ CONFIG_NLS_ISO8859_1=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
+CONFIG_INSTRUMENTATION=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1055,6 +1059,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_SAMPLES is not set
@@ -1066,51 +1071,7 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO is not set
 
 #
 # Library routines
diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig
new file mode 100644
index 00000000000..b94800c0e00
--- /dev/null
+++ b/arch/arm/configs/omap_perseus2_730_defconfig
@@ -0,0 +1,928 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.23-rc6-omap1
+# Tue Sep 18 11:45:12 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+
+#
+# OMAP Core Type
+#
+CONFIG_ARCH_OMAP730=y
+# CONFIG_ARCH_OMAP15XX is not set
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_PERSEUS2=y
+# CONFIG_MACH_OMAP_FSAMPLE is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+# CONFIG_OMAP_ARM_195MHZ is not set
+CONFIG_OMAP_ARM_182MHZ=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+# CONFIG_MACH_OMAP_APOLLON_PLUS is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_LEGACY is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
+# CONFIG_APM_EMULATION is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_OMAP=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_ABITUGURU3 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_NEW_LEDS is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_SYS_FILLRECT=y
+CONFIG_FB_SYS_COPYAREA=y
+CONFIG_FB_SYS_IMAGEBLIT=y
+CONFIG_FB_SYS_FOPS=y
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_OMAP is not set
+CONFIG_FB_VIRTUAL=y
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig
new file mode 100644
index 00000000000..40fc6a778e0
--- /dev/null
+++ b/arch/arm/configs/palmte_defconfig
@@ -0,0 +1,761 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Sat May 19 11:04:27 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+CONFIG_MACH_OMAP_PALMTE=y
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# ISDN subsystem
+#
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+CONFIG_OMAP_RTC=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig
new file mode 100644
index 00000000000..e54ced41217
--- /dev/null
+++ b/arch/arm/configs/palmtt_defconfig
@@ -0,0 +1,844 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.19-rc3-omap1
+# Sun Oct 29 00:36:12 2006
+#
+CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+CONFIG_OMAP_LL_DEBUG_UART2=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+CONFIG_OMAP_DSP_FBEXPORT=y
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+CONFIG_MACH_OMAP_PALMTT=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/mmcblk0p2 rw init=/init"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+# CONFIG_APM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TSC2102 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_OMAP_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_TSC2102 is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+CONFIG_LEDS_OMAP=y
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB=y
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+CONFIG_BACKLIGHT_OMAP=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+CONFIG_RTC_DRV_OMAP=y
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# Synchronous Serial Interfaces (SSI)
+#
+# CONFIG_OMAP_UWIRE is not set
+# CONFIG_OMAP_TSC2101 is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
new file mode 100644
index 00000000000..6361922e71c
--- /dev/null
+++ b/arch/arm/configs/palmz71_defconfig
@@ -0,0 +1,891 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 05:13:00 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION="-z71"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_BOOT_TAG is not set
+# CONFIG_OMAP_GPIO_SWITCH is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MMU_FWK is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_DSP is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+CONFIG_MACH_OMAP_PALMZ71=y
+# CONFIG_MACH_OMAP_PALMTT is not set
+# CONFIG_MACH_SX1 is not set
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=320
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TSC210X is not set
+# CONFIG_TOUCHSCREEN_TSC2046 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_OMAP_UWIRE=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TSC2101 is not set
+# CONFIG_SPI_TSC2102 is not set
+# CONFIG_SPI_TSC210X is not set
+# CONFIG_SPI_TSC2301 is not set
+# CONFIG_SPI_SPIDEV is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_TSC210X is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_OMAP=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# Enable Host or Gadget support to see Inventra options
+#
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
new file mode 100644
index 00000000000..853dcdd9f2e
--- /dev/null
+++ b/arch/arm/configs/sx1_defconfig
@@ -0,0 +1,1118 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.22-rc1-omap1
+# Thu Jun  7 05:16:10 2007
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_BASE_FULL is not set
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=1
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_BOOT_TAG=y
+# CONFIG_OMAP_BOOT_REASON is not set
+# CONFIG_OMAP_COMPONENT_VERSION is not set
+CONFIG_OMAP_GPIO_SWITCH=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+CONFIG_OMAP_MMU_FWK=y
+CONFIG_OMAP_MBOX_FWK=y
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_LCD is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_OMAP_DSP=y
+# CONFIG_OMAP_DSP_MBCMD_VERBOSE is not set
+# CONFIG_OMAP_DSP_TASK_MULTIOPEN is not set
+# CONFIG_OMAP_DSP_FBEXPORT is not set
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP15XX=y
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_INNOVATOR is not set
+# CONFIG_MACH_VOICEBLUE is not set
+# CONFIG_MACH_OMAP_PALMTE is not set
+# CONFIG_MACH_OMAP_PALMZ71 is not set
+# CONFIG_MACH_OMAP_PALMTT is not set
+CONFIG_MACH_SX1=y
+# CONFIG_MACH_AMS_DELTA is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_168MHZ=y
+# CONFIG_OMAP_ARM_150MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+# CONFIG_PROC_EVENTS is not set
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_FIXED_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_TLV320AIC23 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+# CONFIG_HWMON is not set
+
+#
+# Misc devices
+#
+# CONFIG_BLINK is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_CLEAN_4x6 is not set
+# CONFIG_FONT_CLEAN_5x8 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_OMAP_AIC23 is not set
+# CONFIG_SND_OMAP_TSC2101 is not set
+CONFIG_SND_SX1=y
+# CONFIG_SND_OMAP_TSC2102 is not set
+# CONFIG_SND_OMAP24XX_EAC is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_OMAP=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_OMAP=y
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=866
+CONFIG_FAT_DEFAULT_IOCHARSET="koi8-r"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+CONFIG_NLS_CODEPAGE_866=y
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=y
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+CONFIG_NLS_ISO8859_5=y
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+CONFIG_NLS_KOI8_R=y
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
-- 
GitLab


From a814917058a63978ecd9fbefe4f88e3fc1576a79 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 27 Aug 2008 14:29:40 +0100
Subject: [PATCH 524/869] [ARM] OMAP: Fix 2430 SMC91x ethernet IRQ

Taken from omap 97b705ad835f1481270c4b67b402d6e37fa8ad15:
  ARM: OMAP: Misc compile fixes after syncing with mainline

  Also fix 2430 smc91x to use IRQ_LOWLEVEL.

  Signed-off-by: Tony Lindgren <tony@atomide.com>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap2/board-2430sdp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index d4d6385cad7..b72ca13b3ac 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -103,7 +103,7 @@ static struct resource sdp2430_smc91x_resources[] = {
 	[1] = {
 		.start	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
 		.end	= OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
 	},
 };
 
-- 
GitLab


From ae82cbfc8beaa69007aa09966d3983ac938c3577 Mon Sep 17 00:00:00 2001
From: Harvey Harrison <harvey.harrison@gmail.com>
Date: Mon, 18 Aug 2008 17:47:55 -0700
Subject: [PATCH 525/869] [ARM] use the new byteorder headers

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/byteorder.h | 25 +++++++++++--------------
 1 file changed, 11 insertions(+), 14 deletions(-)

diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
index 4fbfb22f65a..d04a7a2bc2e 100644
--- a/arch/arm/include/asm/byteorder.h
+++ b/arch/arm/include/asm/byteorder.h
@@ -18,7 +18,15 @@
 #include <linux/compiler.h>
 #include <asm/types.h>
 
-static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+#ifdef __ARMEB__
+# define __BIG_ENDIAN
+#else
+# define __LITTLE_ENDIAN
+#endif
+
+#define __SWAB_64_THRU_32__
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
 	__u32 t;
 
@@ -40,19 +48,8 @@ static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
 
 	return x;
 }
+#define __arch_swab32 __arch_swab32
 
-#define __arch__swab32(x) ___arch__swab32(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#ifdef __ARMEB__
-#include <linux/byteorder/big_endian.h>
-#else
-#include <linux/byteorder/little_endian.h>
-#endif
+#include <linux/byteorder.h>
 
 #endif
-
-- 
GitLab


From f1bcf7e3e734ea8713e08fbc3409f8bf26ec418f Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Fri, 8 Aug 2008 19:34:35 +0300
Subject: [PATCH 526/869] [ARM] use bcd2bin/bin2bcd

This patch changes arm to use the new bcd2bin/bin2bcd functions instead
of the obsolete BCD_TO_BIN/BIN_TO_BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-footbridge/time.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index fd9a7c11d62..004819ea85c 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -49,12 +49,12 @@ static unsigned long __init get_isa_cmos_time(void)
 	} while (sec != CMOS_READ(RTC_SECONDS));
 
 	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
+		sec = bcd2bin(sec);
+		min = bcd2bin(min);
+		hour = bcd2bin(hour);
+		day = bcd2bin(day);
+		mon = bcd2bin(mon);
+		year = bcd2bin(year);
 	}
 	if ((year += 1900) < 1970)
 		year += 100;
@@ -76,7 +76,7 @@ static int set_isa_cmos_time(void)
 
 	cmos_minutes = CMOS_READ(RTC_MINUTES);
 	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
+		cmos_minutes = bcd2bin(cmos_minutes);
 
 	/*
 	 * since we're only adjusting minutes and seconds,
@@ -92,8 +92,8 @@ static int set_isa_cmos_time(void)
 
 	if (abs(real_minutes - cmos_minutes) < 30) {
 		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
+			real_seconds = bin2bcd(real_seconds);
+			real_minutes = bin2bcd(real_minutes);
 		}
 		CMOS_WRITE(real_seconds,RTC_SECONDS);
 		CMOS_WRITE(real_minutes,RTC_MINUTES);
-- 
GitLab


From e80d6a248298721e0ec2cac150c539d8378577d8 Mon Sep 17 00:00:00 2001
From: Mel Gorman <mel@csn.ul.ie>
Date: Thu, 14 Aug 2008 11:10:14 +0100
Subject: [PATCH 527/869] [ARM] Skip memory holes in FLATMEM when reading
 /proc/pagetypeinfo

Ordinarily, memory holes in flatmem still have a valid memmap and is safe
to use. However, an architecture (ARM) frees up the memmap backing memory
holes on the assumption it is never used. /proc/pagetypeinfo reads the
whole range of pages in a zone believing that the memmap is valid and that
pfn_valid will return false if it is not. On ARM, freeing the memmap breaks
the page->zone linkages even though pfn_valid() returns true and the kernel
can oops shortly afterwards due to accessing a bogus struct zone *.

This patch lets architectures say when FLATMEM can have holes in the
memmap. Rather than an expensive check for valid memory, /proc/pagetypeinfo
will confirm that the page linkages are still valid by checking page->zone
is still the expected zone. The lookup of page_zone is safe as there is a
limited range of memory that is accessed when calling page_zone.  Even if
page_zone happens to return the correct zone, the impact is that the counters
in /proc/pagetypeinfo are slightly off but fragmentation monitoring is
unlikely to be relevant on an embedded system.

Reported-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/Kconfig |  5 +++++
 mm/vmstat.c      | 19 ++++++++++++++++++-
 2 files changed, 23 insertions(+), 1 deletion(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4b8acd2851f..70dba166890 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -810,6 +810,11 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say Y.
 
+config ARCH_FLATMEM_HAS_HOLES
+	bool
+	default y
+	depends on FLATMEM
+
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
 	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
diff --git a/mm/vmstat.c b/mm/vmstat.c
index b0d08e667ec..d7826af2fb0 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -516,9 +516,26 @@ static void pagetypeinfo_showblockcount_print(struct seq_file *m,
 			continue;
 
 		page = pfn_to_page(pfn);
+#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES
+		/*
+		 * Ordinarily, memory holes in flatmem still have a valid
+		 * memmap for the PFN range. However, an architecture for
+		 * embedded systems (e.g. ARM) can free up the memmap backing
+		 * holes to save memory on the assumption the memmap is
+		 * never used. The page_zone linkages are then broken even
+		 * though pfn_valid() returns true. Skip the page if the
+		 * linkages are broken. Even if this test passed, the impact
+		 * is that the counters for the movable type are off but
+		 * fragmentation monitoring is likely meaningless on small
+		 * systems.
+		 */
+		if (page_zone(page) != zone)
+			continue;
+#endif
 		mtype = get_pageblock_migratetype(page);
 
-		count[mtype]++;
+		if (mtype < MIGRATE_TYPES)
+			count[mtype]++;
 	}
 
 	/* Print counts */
-- 
GitLab


From 8560c650f340565b720fd57d1f9c99ab216d99d0 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 27 Aug 2008 13:35:31 -0700
Subject: [PATCH 528/869] Revert "pktcdvd: push BKL down into driver"

This reverts commit 5b6155ee70e9c4d2ad7e6f514c8eee06e2711c3a, because
the block device ioctl's really aren't ready for it.

In particular, the "struct file *" and the "struct inode *" arguments do
not necessarily match, which means that the unlocked version of the
ioctl (that only gets a "struct file *") isn't actually able to handle
the cases it needs to handle.

This fixes bugzilla

	http://bugzilla.kernel.org/show_bug.cgi?id=11401

Reported-and-bisected-by: Laurent Riffard <laurent.riffard@free.fr>
Acked-by: Peter Osterlund <petero2@telia.com>
Cc: Alan Cox <alan@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/block/pktcdvd.c | 35 ++++++++++-------------------------
 1 file changed, 10 insertions(+), 25 deletions(-)

diff --git a/drivers/block/pktcdvd.c b/drivers/block/pktcdvd.c
index 158eed4d516..29b7a648cc6 100644
--- a/drivers/block/pktcdvd.c
+++ b/drivers/block/pktcdvd.c
@@ -49,7 +49,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/kthread.h>
-#include <linux/smp_lock.h>
 #include <linux/errno.h>
 #include <linux/spinlock.h>
 #include <linux/file.h>
@@ -2798,14 +2797,9 @@ out_mem:
 	return ret;
 }
 
-static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+static int pkt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct inode *inode = file->f_path.dentry->d_inode;
-	struct pktcdvd_device *pd;
-	long ret;
-
-	lock_kernel();
-	pd = inode->i_bdev->bd_disk->private_data;
+	struct pktcdvd_device *pd = inode->i_bdev->bd_disk->private_data;
 
 	VPRINTK("pkt_ioctl: cmd %x, dev %d:%d\n", cmd, imajor(inode), iminor(inode));
 
@@ -2818,8 +2812,7 @@ static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	case CDROM_LAST_WRITTEN:
 	case CDROM_SEND_PACKET:
 	case SCSI_IOCTL_SEND_COMMAND:
-		ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
-		break;
+		return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
 
 	case CDROMEJECT:
 		/*
@@ -2828,15 +2821,14 @@ static long pkt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		 */
 		if (pd->refcnt == 1)
 			pkt_lock_door(pd, 0);
-		ret = blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
-		break;
+		return blkdev_ioctl(pd->bdev->bd_inode, file, cmd, arg);
 
 	default:
 		VPRINTK(DRIVER_NAME": Unknown ioctl for %s (%x)\n", pd->name, cmd);
-		ret = -ENOTTY;
+		return -ENOTTY;
 	}
-	unlock_kernel();
-	return ret;
+
+	return 0;
 }
 
 static int pkt_media_changed(struct gendisk *disk)
@@ -2858,7 +2850,7 @@ static struct block_device_operations pktcdvd_ops = {
 	.owner =		THIS_MODULE,
 	.open =			pkt_open,
 	.release =		pkt_close,
-	.unlocked_ioctl =	pkt_ioctl,
+	.ioctl =		pkt_ioctl,
 	.media_changed =	pkt_media_changed,
 };
 
@@ -3023,8 +3015,7 @@ static void pkt_get_status(struct pkt_ctrl_command *ctrl_cmd)
 	mutex_unlock(&ctl_mutex);
 }
 
-static long pkt_ctl_ioctl(struct file *file, unsigned int cmd,
-						unsigned long arg)
+static int pkt_ctl_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
 {
 	void __user *argp = (void __user *)arg;
 	struct pkt_ctrl_command ctrl_cmd;
@@ -3041,22 +3032,16 @@ static long pkt_ctl_ioctl(struct file *file, unsigned int cmd,
 	case PKT_CTRL_CMD_SETUP:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		lock_kernel();
 		ret = pkt_setup_dev(new_decode_dev(ctrl_cmd.dev), &pkt_dev);
 		ctrl_cmd.pkt_dev = new_encode_dev(pkt_dev);
-		unlock_kernel();
 		break;
 	case PKT_CTRL_CMD_TEARDOWN:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
-		lock_kernel();
 		ret = pkt_remove_dev(new_decode_dev(ctrl_cmd.pkt_dev));
-		unlock_kernel();
 		break;
 	case PKT_CTRL_CMD_STATUS:
-		lock_kernel();
 		pkt_get_status(&ctrl_cmd);
-		unlock_kernel();
 		break;
 	default:
 		return -ENOTTY;
@@ -3069,7 +3054,7 @@ static long pkt_ctl_ioctl(struct file *file, unsigned int cmd,
 
 
 static const struct file_operations pkt_ctl_fops = {
-	.unlocked_ioctl	 = pkt_ctl_ioctl,
+	.ioctl	 = pkt_ctl_ioctl,
 	.owner	 = THIS_MODULE,
 };
 
-- 
GitLab


From f42ac38c59e0a03d6da0c24a63fb211393f484b0 Mon Sep 17 00:00:00 2001
From: Steven Rostedt <rostedt@goodmis.org>
Date: Wed, 27 Aug 2008 09:14:40 -0400
Subject: [PATCH 529/869] ftrace: disable tracing for suspend to ram

I've been painstakingly debugging the issue with suspend to ram and
ftraced. The 2.6.28 code does not have this issue, but since the mcount
recording is not going to be in 27, this must be solved for the ftrace
daemon version.

The resume from suspend to ram would reboot because it was triple
faulting. Debugging further, I found that calling the mcount function
itself was not an issue, but it would fault when it incremented
preempt_count. preempt_count is on the tasks info structure that is on the
low memory address of the task's stack.  For some reason, it could not
write to it. Resuming out of suspend to ram does quite a lot of funny
tricks to get to work, so it is not surprising at all that simply doing a
preempt_disable() would cause a fault.

Thanks to Rafael for suggesting to add a "while (1);" to find the place in
resuming that is causing the fault. I would place the loop somewhere in
the code, compile and reboot and see if it would either reboot (hit the
fault) or simply hang (hit the loop).  Doing this over and over again, I
narrowed it down that it was happening in enable_nonboot_cpus.

At this point, I found that it is easier to simply disable tracing around
the suspend code, instead of searching for the particular function that
can not handle doing a preempt_disable.

This patch disables the tracer as it suspends and reenables it on resume.

I tested this patch on my Laptop, and it can resume fine with the patch.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/power/main.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/kernel/power/main.c b/kernel/power/main.c
index 0b7476f5d2a..540b16b6856 100644
--- a/kernel/power/main.c
+++ b/kernel/power/main.c
@@ -21,6 +21,7 @@
 #include <linux/freezer.h>
 #include <linux/vmstat.h>
 #include <linux/syscalls.h>
+#include <linux/ftrace.h>
 
 #include "power.h"
 
@@ -310,7 +311,7 @@ static int suspend_enter(suspend_state_t state)
  */
 int suspend_devices_and_enter(suspend_state_t state)
 {
-	int error;
+	int error, ftrace_save;
 
 	if (!suspend_ops)
 		return -ENOSYS;
@@ -321,6 +322,7 @@ int suspend_devices_and_enter(suspend_state_t state)
 			goto Close;
 	}
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	suspend_test_start();
 	error = device_suspend(PMSG_SUSPEND);
 	if (error) {
@@ -352,6 +354,7 @@ int suspend_devices_and_enter(suspend_state_t state)
 	suspend_test_start();
 	device_resume(PMSG_RESUME);
 	suspend_test_finish("resume devices");
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
  Close:
 	if (suspend_ops->end)
-- 
GitLab


From 16ecf85a5ca7345efbcbb2de76607db0f7ec9049 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 27 Aug 2008 01:14:46 -0700
Subject: [PATCH 530/869] e1000: fix stack size

Here's the patch. It shrinks the stack from 1152 bytes to 192 bytes (the
first version, that only did the e1000_option part, got it down to 600
bytes). About half comes from not using multiple "e1000_option"
structures, the other half comes from turning the "e1000_opt_list[]"
arrays into "static const" instead, so that gcc doesn't copy them onto the
stack.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reveiewed-by: Auke Kok <auke-jan.h.kok@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/e1000/e1000_param.c | 81 ++++++++++++++++++---------------
 1 file changed, 45 insertions(+), 36 deletions(-)

diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c
index b9f90a5d3d4..213437d1315 100644
--- a/drivers/net/e1000/e1000_param.c
+++ b/drivers/net/e1000/e1000_param.c
@@ -208,7 +208,7 @@ struct e1000_option {
 		} r;
 		struct { /* list_option info */
 			int nr;
-			struct e1000_opt_list { int i; char *str; } *p;
+			const struct e1000_opt_list { int i; char *str; } *p;
 		} l;
 	} arg;
 };
@@ -242,7 +242,7 @@ static int __devinit e1000_validate_option(unsigned int *value,
 		break;
 	case list_option: {
 		int i;
-		struct e1000_opt_list *ent;
+		const struct e1000_opt_list *ent;
 
 		for (i = 0; i < opt->arg.l.nr; i++) {
 			ent = &opt->arg.l.p[i];
@@ -279,7 +279,9 @@ static void e1000_check_copper_options(struct e1000_adapter *adapter);
 
 void __devinit e1000_check_options(struct e1000_adapter *adapter)
 {
+	struct e1000_option opt;
 	int bd = adapter->bd_number;
+
 	if (bd >= E1000_MAX_NIC) {
 		DPRINTK(PROBE, NOTICE,
 		       "Warning: no configuration for board #%i\n", bd);
@@ -287,19 +289,21 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 	}
 
 	{ /* Transmit Descriptor Count */
-		struct e1000_option opt = {
+		struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+		int i;
+		e1000_mac_type mac_type = adapter->hw.mac_type;
+
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Transmit Descriptors",
 			.err  = "using default of "
 				__MODULE_STRING(E1000_DEFAULT_TXD),
 			.def  = E1000_DEFAULT_TXD,
-			.arg  = { .r = { .min = E1000_MIN_TXD }}
+			.arg  = { .r = {
+				.min = E1000_MIN_TXD,
+				.max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD
+				}}
 		};
-		struct e1000_tx_ring *tx_ring = adapter->tx_ring;
-		int i;
-		e1000_mac_type mac_type = adapter->hw.mac_type;
-		opt.arg.r.max = mac_type < e1000_82544 ?
-			E1000_MAX_TXD : E1000_MAX_82544_TXD;
 
 		if (num_TxDescriptors > bd) {
 			tx_ring->count = TxDescriptors[bd];
@@ -313,19 +317,21 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			tx_ring[i].count = tx_ring->count;
 	}
 	{ /* Receive Descriptor Count */
-		struct e1000_option opt = {
+		struct e1000_rx_ring *rx_ring = adapter->rx_ring;
+		int i;
+		e1000_mac_type mac_type = adapter->hw.mac_type;
+
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Receive Descriptors",
 			.err  = "using default of "
 				__MODULE_STRING(E1000_DEFAULT_RXD),
 			.def  = E1000_DEFAULT_RXD,
-			.arg  = { .r = { .min = E1000_MIN_RXD }}
+			.arg  = { .r = {
+				.min = E1000_MIN_RXD,
+				.max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
+			}}
 		};
-		struct e1000_rx_ring *rx_ring = adapter->rx_ring;
-		int i;
-		e1000_mac_type mac_type = adapter->hw.mac_type;
-		opt.arg.r.max = mac_type < e1000_82544 ? E1000_MAX_RXD :
-			E1000_MAX_82544_RXD;
 
 		if (num_RxDescriptors > bd) {
 			rx_ring->count = RxDescriptors[bd];
@@ -339,7 +345,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			rx_ring[i].count = rx_ring->count;
 	}
 	{ /* Checksum Offload Enable/Disable */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = enable_option,
 			.name = "Checksum Offload",
 			.err  = "defaulting to Enabled",
@@ -363,7 +369,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 			 { E1000_FC_FULL,    "Flow Control Enabled" },
 			 { E1000_FC_DEFAULT, "Flow Control Hardware Default" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "Flow Control",
 			.err  = "reading default settings from EEPROM",
@@ -381,7 +387,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Transmit Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Transmit Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_TIDV),
@@ -399,7 +405,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Transmit Absolute Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Transmit Absolute Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_TADV),
@@ -417,7 +423,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Receive Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Receive Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_RDTR),
@@ -435,7 +441,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Receive Absolute Interrupt Delay */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Receive Absolute Interrupt Delay",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_RADV),
@@ -453,7 +459,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Interrupt Throttling Rate */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = range_option,
 			.name = "Interrupt Throttling Rate (ints/sec)",
 			.err  = "using default of " __MODULE_STRING(DEFAULT_ITR),
@@ -497,7 +503,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Smart Power Down */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = enable_option,
 			.name = "PHY Smart Power Down",
 			.err  = "defaulting to Disabled",
@@ -513,7 +519,7 @@ void __devinit e1000_check_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Kumeran Lock Loss Workaround */
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = enable_option,
 			.name = "Kumeran Lock Loss Workaround",
 			.err  = "defaulting to Enabled",
@@ -578,16 +584,18 @@ static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
 
 static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 {
+	struct e1000_option opt;
 	unsigned int speed, dplx, an;
 	int bd = adapter->bd_number;
 
 	{ /* Speed */
-		struct e1000_opt_list speed_list[] = {{          0, "" },
-						      {   SPEED_10, "" },
-						      {  SPEED_100, "" },
-						      { SPEED_1000, "" }};
+		static const struct e1000_opt_list speed_list[] = {
+			{          0, "" },
+			{   SPEED_10, "" },
+			{  SPEED_100, "" },
+			{ SPEED_1000, "" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "Speed",
 			.err  = "parameter ignored",
@@ -604,11 +612,12 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 		}
 	}
 	{ /* Duplex */
-		struct e1000_opt_list dplx_list[] = {{           0, "" },
-						     { HALF_DUPLEX, "" },
-						     { FULL_DUPLEX, "" }};
+		static const struct e1000_opt_list dplx_list[] = {
+			{           0, "" },
+			{ HALF_DUPLEX, "" },
+			{ FULL_DUPLEX, "" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "Duplex",
 			.err  = "parameter ignored",
@@ -637,7 +646,7 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 		       "parameter ignored\n");
 		adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
 	} else { /* Autoneg */
-		struct e1000_opt_list an_list[] =
+		static const struct e1000_opt_list an_list[] =
 			#define AA "AutoNeg advertising "
 			{{ 0x01, AA "10/HD" },
 			 { 0x02, AA "10/FD" },
@@ -671,7 +680,7 @@ static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
 			 { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
 			 { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
 
-		struct e1000_option opt = {
+		opt = (struct e1000_option) {
 			.type = list_option,
 			.name = "AutoNeg",
 			.err  = "parameter ignored",
-- 
GitLab


From 87ed1d65fb536a0cd4e84874c0b038f953e448aa Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Wed, 27 Aug 2008 17:53:30 +0000
Subject: [PATCH 531/869] [CIFS] Add destroy routine for dns_resolver

Otherwise, we're leaking the payload memory.

CC: Stable Kernel <stable@vger.kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES       | 3 ++-
 fs/cifs/dns_resolve.c | 7 +++++++
 2 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 526041a52d3..f9e4ad97a79 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -8,7 +8,8 @@ architectures.  Fix problems with preserving timestamps on copying open
 files (e.g. "cp -a") to Windows servers.  For mkdir and create honor setgid bit
 on parent directory when server supports Unix Extensions but not POSIX
 create. Update cifs.upcall version to handle new Kerberos sec flags
-(this requires update of cifs.upcall program from Samba).
+(this requires update of cifs.upcall program from Samba).  Fix memory leak
+on dns_upcall (resolving DFS referralls).
 
 Version 1.53
 ------------
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index f730ef35499..a2e0673e1b0 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -47,11 +47,18 @@ static int dns_resolver_instantiate(struct key *key, const void *data,
 	return rc;
 }
 
+static void
+dns_resolver_destroy(struct key *key)
+{
+	kfree(key->payload.data);
+}
+
 struct key_type key_type_dns_resolver = {
 	.name        = "dns_resolver",
 	.def_datalen = sizeof(struct in_addr),
 	.describe    = user_describe,
 	.instantiate = dns_resolver_instantiate,
+	.destroy     = dns_resolver_destroy,
 	.match       = user_match,
 };
 
-- 
GitLab


From bcc55c6664a90146149ba0fd93052adc94287b9f Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Wed, 27 Aug 2008 21:30:22 +0000
Subject: [PATCH 532/869] [CIFS] Fix plaintext authentication

The last eight bytes of the password field were not cleared when doing lanman plaintext password authentication. This patch fixes that.

I tested it with Samba by setting password
encryption to no in the server's smb.conf.  Other servers also can be
configured to force plaintext authentication.    Note that plaintexti
authentication requires setting /proc/fs/cifs/SecurityFlags to 0x30030
on the client (enabling both LANMAN and also plaintext password support).
Also note that LANMAN support (and thus plaintext password support) requires
CONFIG_CIFS_WEAK_PW_HASH to be enabled in menuconfig.

CC: Jeff Layton <jlayton@redhat.com>
CC: Stable Kernel <stable@vger.kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/cifsencrypt.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index 83fd40dc1ef..bd5f13d3845 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -294,6 +294,7 @@ void calc_lanman_hash(struct cifsSesInfo *ses, char *lnm_session_key)
 
 	if ((ses->server->secMode & SECMODE_PW_ENCRYPT) == 0)
 		if (extended_security & CIFSSEC_MAY_PLNTXT) {
+			memset(lnm_session_key, 0, CIFS_SESS_KEY_SIZE);
 			memcpy(lnm_session_key, password_with_pad,
 				CIFS_ENCPWD_SIZE);
 			return;
-- 
GitLab


From f753f3272b4d2108d1e4b121ddcde504737a8693 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 26 Aug 2008 19:52:47 +0100
Subject: [PATCH 533/869] tty: TIOCGSOFTCAR/SSOFTCAR on pty is wron

The termios settings ioctls on a pty should affect the bound tty side not
the pty. The SOFTCAR ioctls use the wrong device file.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tty_ioctl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
index ea9fc5d03b9..bf34e459742 100644
--- a/drivers/char/tty_ioctl.c
+++ b/drivers/char/tty_ioctl.c
@@ -937,12 +937,14 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
 			return 0;
 #endif
 	case TIOCGSOFTCAR:
-		return put_user(C_CLOCAL(tty) ? 1 : 0,
+		/* FIXME: for correctness we may need to take the termios
+		   lock here - review */
+		return put_user(C_CLOCAL(real_tty) ? 1 : 0,
 						(int __user *)arg);
 	case TIOCSSOFTCAR:
 		if (get_user(arg, (unsigned int __user *) arg))
 			return -EFAULT;
-		return tty_change_softcar(tty, arg);
+		return tty_change_softcar(real_tty, arg);
 	default:
 		return -ENOIOCTLCMD;
 	}
-- 
GitLab


From a152db71d962f405f7e9be5c818bddf6d1be50a7 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Tue, 26 Aug 2008 19:55:58 +0100
Subject: [PATCH 534/869] tty: Fix termios tty window resize race with pty/tty
 pair

Kanru Chen posted a patch versus the old code which deals with the case
where you resize the pty side of a pty/tty pair. In that situation the
termios data is updated for both pty and tty but the locks are not held
for the right side.

This implements the fix differently against the updated tty code. Patch
by self but the hard bit (noticing and fixing the bug) is thanks to Kanru
Chen.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/tty_io.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index a27160ba21d..daeb8f76697 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -2498,7 +2498,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
 /**
  *	tty_do_resize		-	resize event
  *	@tty: tty being resized
- *	@real_tty: real tty (if using a pty/tty pair)
+ *	@real_tty: real tty (not the same as tty if using a pty/tty pair)
  *	@rows: rows (character)
  *	@cols: cols (character)
  *
@@ -2512,7 +2512,8 @@ int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
 	struct pid *pgrp, *rpgrp;
 	unsigned long flags;
 
-	mutex_lock(&tty->termios_mutex);
+	/* For a PTY we need to lock the tty side */
+	mutex_lock(&real_tty->termios_mutex);
 	if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
 		goto done;
 	/* Get the PID values and reference them so we can
@@ -2533,7 +2534,7 @@ int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty,
 	tty->winsize = *ws;
 	real_tty->winsize = *ws;
 done:
-	mutex_unlock(&tty->termios_mutex);
+	mutex_unlock(&real_tty->termios_mutex);
 	return 0;
 }
 
-- 
GitLab


From 4c246edd2550304df5b766cc841584b2bb058843 Mon Sep 17 00:00:00 2001
From: Vladimir Sokolovsky <vlad@mellanox.co.il>
Date: Wed, 27 Aug 2008 14:29:57 -0700
Subject: [PATCH 535/869] IB/mlx4: Actually return L_Key and R_Key for fast
 register MRs

Initialize the L_Key and R_Key for memory regions returned from
mlx4_ib_alloc_fast_reg_mr().  Otherwise callers just get garbage for
the memory keys and can't do anything useful with these MRs.

Signed-off-by: Vladimir Sokolovsky <vlad@mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/infiniband/hw/mlx4/mr.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c
index a4cdb465cd1..87f5c5a87b9 100644
--- a/drivers/infiniband/hw/mlx4/mr.c
+++ b/drivers/infiniband/hw/mlx4/mr.c
@@ -204,6 +204,8 @@ struct ib_mr *mlx4_ib_alloc_fast_reg_mr(struct ib_pd *pd,
 	if (err)
 		goto err_mr;
 
+	mr->ibmr.rkey = mr->ibmr.lkey = mr->mmr.key;
+
 	return &mr->ibmr;
 
 err_mr:
-- 
GitLab


From 328fc47ea0bcc27d9afa69c3ad6e52431cadd76c Mon Sep 17 00:00:00 2001
From: Vlad Yasevich <vladislav.yasevich@hp.com>
Date: Wed, 27 Aug 2008 16:08:54 -0700
Subject: [PATCH 536/869] sctp: correct bounds check in
 sctp_setsockopt_auth_key

The bonds check to prevent buffer overlflow was not exactly
right.  It still allowed overflow of up to 8 bytes which is
sizeof(struct sctp_authkey).

Since optlen is already checked against the size of that struct,
we are guaranteed not to cause interger overflow either.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sctp/socket.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index afa952e726d..9b9b2c31dd1 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3144,7 +3144,7 @@ static int sctp_setsockopt_auth_key(struct sock *sk,
 		goto out;
 	}
 
-	if (authkey->sca_keylength > optlen) {
+	if (authkey->sca_keylength > optlen - sizeof(struct sctp_authkey)) {
 		ret = -EINVAL;
 		goto out;
 	}
-- 
GitLab


From d97240552cd98c4b07322f30f66fd9c3ba4171de Mon Sep 17 00:00:00 2001
From: Vlad Yasevich <vladislav.yasevich@hp.com>
Date: Wed, 27 Aug 2008 16:09:49 -0700
Subject: [PATCH 537/869] sctp: fix random memory dereference with
 SCTP_HMAC_IDENT option.

The number of identifiers needs to be checked against the option
length.  Also, the identifier index provided needs to be verified
to make sure that it doesn't exceed the bounds of the array.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sctp/auth.c   | 3 +++
 net/sctp/socket.c | 6 ++++--
 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/net/sctp/auth.c b/net/sctp/auth.c
index 1fcb4cf2f4c..52db5f60daa 100644
--- a/net/sctp/auth.c
+++ b/net/sctp/auth.c
@@ -786,6 +786,9 @@ int sctp_auth_ep_set_hmacs(struct sctp_endpoint *ep,
 	for (i = 0; i < hmacs->shmac_num_idents; i++) {
 		id = hmacs->shmac_idents[i];
 
+		if (id > SCTP_AUTH_HMAC_ID_MAX)
+			return -EOPNOTSUPP;
+
 		if (SCTP_AUTH_HMAC_ID_SHA1 == id)
 			has_sha1 = 1;
 
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 9b9b2c31dd1..5ffb9dec1c3 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -3086,6 +3086,7 @@ static int sctp_setsockopt_hmac_ident(struct sock *sk,
 				    int optlen)
 {
 	struct sctp_hmacalgo *hmacs;
+	u32 idents;
 	int err;
 
 	if (!sctp_auth_enable)
@@ -3103,8 +3104,9 @@ static int sctp_setsockopt_hmac_ident(struct sock *sk,
 		goto out;
 	}
 
-	if (hmacs->shmac_num_idents == 0 ||
-	    hmacs->shmac_num_idents > SCTP_AUTH_NUM_HMACS) {
+	idents = hmacs->shmac_num_idents;
+	if (idents == 0 || idents > SCTP_AUTH_NUM_HMACS ||
+	    (idents * sizeof(u16)) > (optlen - sizeof(struct sctp_hmacalgo))) {
 		err = -EINVAL;
 		goto out;
 	}
-- 
GitLab


From 66e4f8c076f8803e83879d986a7803a918b2129e Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 27 Aug 2008 20:03:22 -0700
Subject: [PATCH 538/869] sparc32: Implement smp_call_function_single().

Reported by Stephen Rothwell.

Needed to fix the build when CONFIG_RELAY is enabled.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/include/asm/smp_32.h | 25 +++++++++++++++----------
 arch/sparc/kernel/sun4d_smp.c   | 16 ++++++++++------
 arch/sparc/kernel/sun4m_smp.c   | 12 ++++++++----
 3 files changed, 33 insertions(+), 20 deletions(-)

diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h
index 7201752cf93..a8180e546a4 100644
--- a/arch/sparc/include/asm/smp_32.h
+++ b/arch/sparc/include/asm/smp_32.h
@@ -50,27 +50,24 @@ struct seq_file;
 void smp_bogo(struct seq_file *);
 void smp_info(struct seq_file *);
 
-BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, cpumask_t, unsigned long, unsigned long, unsigned long, unsigned long)
 BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
 BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
 BTFIXUPDEF_BLACKBOX(load_current)
 
-#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
+#define smp_cross_call(func,mask,arg1,arg2,arg3,arg4) BTFIXUP_CALL(smp_cross_call)(func,mask,arg1,arg2,arg3,arg4)
 
-static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
+static inline void xc0(smpfunc_t func) { smp_cross_call(func, cpu_online_map, 0, 0, 0, 0); }
 static inline void xc1(smpfunc_t func, unsigned long arg1)
-{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, 0, 0, 0); }
 static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
-{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, 0, 0); }
 static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 			   unsigned long arg3)
-{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, 0); }
 static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 			   unsigned long arg3, unsigned long arg4)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
-static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-			   unsigned long arg3, unsigned long arg4, unsigned long arg5)
-{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
+{ smp_cross_call(func, cpu_online_map, arg1, arg2, arg3, arg4); }
 
 static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
 {
@@ -78,6 +75,14 @@ static inline int smp_call_function(void (*func)(void *info), void *info, int wa
 	return 0;
 }
 
+static inline int smp_call_function_single(int cpuid, void (*func) (void *info),
+					   void *info, int wait)
+{
+	smp_cross_call((smpfunc_t)func, cpumask_of_cpu(cpuid),
+		       (unsigned long) info, 0, 0, 0);
+	return 0;
+}
+
 static inline int cpu_logical_map(int cpu)
 {
 	return cpu;
diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c
index dfde77ff084..69596402a50 100644
--- a/arch/sparc/kernel/sun4d_smp.c
+++ b/arch/sparc/kernel/sun4d_smp.c
@@ -262,8 +262,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-		    unsigned long arg3, unsigned long arg4, unsigned long arg5)
+static void smp4d_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
+			     unsigned long arg2, unsigned long arg3,
+			     unsigned long arg4)
 {
 	if(smp_processors_ready) {
 		register int high = smp_highest_cpu;
@@ -278,7 +279,7 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 			register unsigned long a2 asm("i2") = arg2;
 			register unsigned long a3 asm("i3") = arg3;
 			register unsigned long a4 asm("i4") = arg4;
-			register unsigned long a5 asm("i5") = arg5;
+			register unsigned long a5 asm("i5") = 0;
 
 			__asm__ __volatile__(
 				"std %0, [%6]\n\t"
@@ -290,11 +291,10 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 
 		/* Init receive/complete mapping, plus fire the IPI's off. */
 		{
-			cpumask_t mask;
 			register int i;
 
-			mask = cpumask_of_cpu(hard_smp4d_processor_id());
-			cpus_andnot(mask, cpu_online_map, mask);
+			cpu_clear(smp_processor_id(), mask);
+			cpus_and(mask, cpu_online_map, mask);
 			for(i = 0; i <= high; i++) {
 				if (cpu_isset(i, mask)) {
 					ccall_info.processors_in[i] = 0;
@@ -309,12 +309,16 @@ void smp4d_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_in[i])
 					barrier();
 			} while(++i <= high);
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_out[i])
 					barrier();
 			} while(++i <= high);
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index 406ac1abc83..a14a76ac7f3 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -244,9 +244,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
+static void smp4m_cross_call(smpfunc_t func, cpumask_t mask, unsigned long arg1,
 			     unsigned long arg2, unsigned long arg3,
-			     unsigned long arg4, unsigned long arg5)
+			     unsigned long arg4)
 {
 		register int ncpus = SUN4M_NCPUS;
 		unsigned long flags;
@@ -259,14 +259,14 @@ static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
 		ccall_info.arg2 = arg2;
 		ccall_info.arg3 = arg3;
 		ccall_info.arg4 = arg4;
-		ccall_info.arg5 = arg5;
+		ccall_info.arg5 = 0;
 
 		/* Init receive/complete mapping, plus fire the IPI's off. */
 		{
-			cpumask_t mask = cpu_online_map;
 			register int i;
 
 			cpu_clear(smp_processor_id(), mask);
+			cpus_and(mask, cpu_online_map, mask);
 			for(i = 0; i < ncpus; i++) {
 				if (cpu_isset(i, mask)) {
 					ccall_info.processors_in[i] = 0;
@@ -284,12 +284,16 @@ static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_in[i])
 					barrier();
 			} while(++i < ncpus);
 
 			i = 0;
 			do {
+				if (!cpu_isset(i, mask))
+					continue;
 				while(!ccall_info.processors_out[i])
 					barrier();
 			} while(++i < ncpus);
-- 
GitLab


From 34894c7843e00972d88b3592027703d4e05a06a7 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 27 Aug 2008 18:15:43 +0900
Subject: [PATCH 539/869] sh: crash kernel resource fix

The reserved crash kernel memory range is currently missing from
/proc/iomem. crashk_res is mistakenly setup after __add_active_range().
Reorder things to make sure the resource shows up in /proc/iomem.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/setup.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index a35207655e7..de832056bf1 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -171,6 +171,7 @@ static void __init reserve_crashkernel(void)
 				(unsigned long)(free_mem >> 20));
 		crashk_res.start = crash_base;
 		crashk_res.end   = crash_base + crash_size - 1;
+		insert_resource(&iomem_resource, &crashk_res);
 	}
 }
 #else
@@ -204,11 +205,6 @@ void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
 	request_resource(res, &data_resource);
 	request_resource(res, &bss_resource);
 
-#ifdef CONFIG_KEXEC
-	if (crashk_res.start != crashk_res.end)
-		request_resource(res, &crashk_res);
-#endif
-
 	add_active_range(nid, start_pfn, end_pfn);
 }
 
-- 
GitLab


From 5734493bac88b28d8d7e2f262305fd6e83545ac5 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 27 Aug 2008 18:19:01 +0900
Subject: [PATCH 540/869] sh: fix kexec entry point for crash kernels

The crash kernel entry point is currently checked by the kexec kernel
code and only physical addresses in the reserved memory window are
accepted. This means that we can't pass P2 or P1 addresses as entry
points in the case of crash kernels. This patch makes sure we can start
crash kernels by adding support for physical address entry points.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/machine_kexec.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 4703dff174d..94df56b0d1f 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -102,7 +102,7 @@ void machine_kexec(struct kimage *image)
 
 	/* now call it */
 	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+	(*rnk)(page_list, reboot_code_buffer, P2SEGADDR(image->start), vbr_reg);
 }
 
 void arch_crash_save_vmcoreinfo(void)
-- 
GitLab


From c773d8af8ebccb723e9843c1e73840b2c5e00572 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 27 Aug 2008 18:21:29 +0900
Subject: [PATCH 541/869] sh: fix platform_resource_setup_memory() section
 mismatch

This patch kills a section mismatch for platform_resource_setup_memory().

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/mm/consistent.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 895bb3f335c..64b8f7f96f9 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -101,7 +101,7 @@ static int __init memchunk_setup(char *str)
 }
 __setup("memchunk.", memchunk_setup);
 
-static void memchunk_cmdline_override(char *name, unsigned long *sizep)
+static void __init memchunk_cmdline_override(char *name, unsigned long *sizep)
 {
 	char *p = boot_command_line;
 	int k = strlen(name);
@@ -118,8 +118,8 @@ static void memchunk_cmdline_override(char *name, unsigned long *sizep)
 	}
 }
 
-int platform_resource_setup_memory(struct platform_device *pdev,
-				   char *name, unsigned long memsize)
+int __init platform_resource_setup_memory(struct platform_device *pdev,
+					  char *name, unsigned long memsize)
 {
 	struct resource *r;
 	dma_addr_t dma_handle;
-- 
GitLab


From be8c129f1a853daac9085d81256c9d4bd38c6a11 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 27 Aug 2008 18:22:49 +0900
Subject: [PATCH 542/869] sh: update Migo-R defconfig

This patch updates the MigoR defconfig to include the recently merged
uio_pdrv_genirq driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/migor_defconfig | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index c4b3e1d8950..4f8b1974f2c 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:44:41 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:18:17 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -21,7 +22,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -87,6 +87,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -270,6 +271,7 @@ CONFIG_HZ=250
 # CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -294,10 +296,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -649,6 +647,7 @@ CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
@@ -709,6 +708,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -755,6 +755,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -842,7 +844,10 @@ CONFIG_RTC_DRV_RS5C372=y
 #
 CONFIG_RTC_DRV_SH=y
 # CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems
-- 
GitLab


From f9bed3f2040b2ed44f0d1b7f0280458533c5d2a0 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 27 Aug 2008 18:23:52 +0900
Subject: [PATCH 543/869] sh: update AP325RXA defconfig

This patch updates the AP325RXA defconfig to include the recently merged
uio_pdrv_genirq driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/configs/ap325rxa_defconfig | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 29926a9b9ce..851c870adf3 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26
-# Wed Jul 30 01:18:59 2008
+# Linux kernel version: 2.6.27-rc4
+# Tue Aug 26 14:21:17 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -11,6 +11,7 @@ CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -20,7 +21,6 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -58,7 +58,6 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -89,6 +88,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_USE_GENERIC_SMP_HELPERS is not set
 CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
@@ -261,9 +261,10 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
-# CONFIG_SCHED_HRTICK is not set
+CONFIG_SCHED_HRTICK=y
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
@@ -289,10 +290,6 @@ CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -647,6 +644,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
 
 #
 # Multimedia devices
@@ -690,7 +688,10 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=y
+# CONFIG_UIO_PDRV is not set
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_UIO_SMX is not set
 
 #
 # File systems
@@ -854,6 +855,7 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-- 
GitLab


From 3c31bf73134038a417a9ae3fa3c02c279b42c550 Mon Sep 17 00:00:00 2001
From: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Date: Wed, 27 Aug 2008 20:16:46 +0900
Subject: [PATCH 544/869] sh: fix semtimedop syscall

fix the problem that cannot work semtimedop system call.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/sys_sh.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c
index 59cd2859ce9..9061b86d73f 100644
--- a/arch/sh/kernel/sys_sh.c
+++ b/arch/sh/kernel/sys_sh.c
@@ -170,7 +170,7 @@ asmlinkage int sys_ipc(uint call, int first, int second,
 	version = call >> 16; /* hack for backward compatibility */
 	call &= 0xffff;
 
-	if (call <= SEMCTL)
+	if (call <= SEMTIMEDOP)
 		switch (call) {
 		case SEMOP:
 			return sys_semtimedop(first,
-- 
GitLab


From ee35425c8eb11556a4cb7b1c7543f1bfb88f911c Mon Sep 17 00:00:00 2001
From: Marc Pignat <marc.pignat@hevs.ch>
Date: Thu, 28 Aug 2008 08:33:22 +0200
Subject: [PATCH 545/869] i2c: Fix device_init_wakeup place

device_init_wakeup must be called after device_register.

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
---
 drivers/i2c/i2c-core.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 550853f79ae..4ac33670797 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -108,6 +108,9 @@ static int i2c_device_probe(struct device *dev)
 	if (!driver->probe || !driver->id_table)
 		return -ENODEV;
 	client->driver = driver;
+	if (!device_can_wakeup(&client->dev))
+		device_init_wakeup(&client->dev,
+					client->flags & I2C_CLIENT_WAKE);
 	dev_dbg(dev, "probe\n");
 
 	status = driver->probe(client, i2c_match_id(driver->id_table, client));
@@ -262,9 +265,8 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	client->adapter = adap;
 
 	client->dev.platform_data = info->platform_data;
-	device_init_wakeup(&client->dev, info->flags & I2C_CLIENT_WAKE);
 
-	client->flags = info->flags & ~I2C_CLIENT_WAKE;
+	client->flags = info->flags;
 	client->addr = info->addr;
 	client->irq = info->irq;
 
-- 
GitLab


From 96e21e4fbc1b83a3445553381ec74f904618562e Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Thu, 28 Aug 2008 08:33:23 +0200
Subject: [PATCH 546/869] i2c: Add missing kerneldoc descriptions

Add missing kernel descriptions of struct i2c_driver members.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: David Brownell <david-b@pacbell.net>
---
 include/linux/i2c.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 08be0d21864..06115128047 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -97,7 +97,19 @@ extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
 
 /**
  * struct i2c_driver - represent an I2C device driver
+ * @id: Unique driver ID (optional)
  * @class: What kind of i2c device we instantiate (for detect)
+ * @attach_adapter: Callback for bus addition (for legacy drivers)
+ * @detach_adapter: Callback for bus removal (for legacy drivers)
+ * @detach_client: Callback for device removal (for legacy drivers)
+ * @probe: Callback for device binding (new-style drivers)
+ * @remove: Callback for device unbinding (new-style drivers)
+ * @shutdown: Callback for device shutdown
+ * @suspend: Callback for device suspend
+ * @resume: Callback for device resume
+ * @command: Callback for bus-wide signaling (optional)
+ * @driver: Device driver model driver
+ * @id_table: List of I2C devices supported by this driver
  * @detect: Callback for device detection
  * @address_data: The I2C addresses to probe, ignore or force (for detect)
  * @clients: List of detected clients we created (for i2c-core use only)
-- 
GitLab


From 4329cf8613b0c7cdc020005f0e1ea7378681f1d8 Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Thu, 28 Aug 2008 08:33:23 +0200
Subject: [PATCH 547/869] i2c: Prevent log spam on some DVB adapters

Some DVB adapters do not support the special I2C transaction that we
use for probing purposes. There's no point in logging this event, as
there's nothing the user can do and in general there is no actual
problem. So, degrade one of these messages to a debug message, and
move the other one around so that it is only printed on bogus drivers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Uwe Bugla <uwe.bugla@gmx.de>
---
 drivers/i2c/i2c-core.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 4ac33670797..b346a687ab5 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1190,8 +1190,8 @@ int i2c_probe(struct i2c_adapter *adapter,
 		 && address_data->normal_i2c[0] == I2C_CLIENT_END)
 			return 0;
 
-		dev_warn(&adapter->dev, "SMBus Quick command not supported, "
-			 "can't probe for chips\n");
+		dev_dbg(&adapter->dev, "SMBus Quick command not supported, "
+			"can't probe for chips\n");
 		return -EOPNOTSUPP;
 	}
 
@@ -1352,6 +1352,10 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 		}
 	}
 
+	/* Stop here if the classes do not match */
+	if (!(adapter->class & driver->class))
+		goto exit_free;
+
 	/* Stop here if we can't use SMBUS_QUICK */
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_QUICK)) {
 		if (address_data->probe[0] == I2C_CLIENT_END
@@ -1364,10 +1368,6 @@ static int i2c_detect(struct i2c_adapter *adapter, struct i2c_driver *driver)
 		goto exit_free;
 	}
 
-	/* Stop here if the classes do not match */
-	if (!(adapter->class & driver->class))
-		goto exit_free;
-
 	/* Probe entries are done second, and are not affected by ignore
 	   entries either */
 	for (i = 0; address_data->probe[i] != I2C_CLIENT_END; i += 2) {
-- 
GitLab


From f3ade837808121ff8bab9c56725f4fe40ec85a56 Mon Sep 17 00:00:00 2001
From: John Blackwood <john.blackwood@ccur.com>
Date: Tue, 26 Aug 2008 15:09:43 -0400
Subject: [PATCH 548/869] sched: fix sched_rt_rq_enqueue() resched idle

When sysctl_sched_rt_runtime is set to something other than -1 and the
CONFIG_RT_GROUP_SCHED kernel parameter is NOT enabled, we get into a state
where we see one or more CPUs idling forvever even though there are
real-time
tasks in their rt runqueue that are able to run (no longer throttled).

The sequence is:

- A real-time task is running when the timer sets the rt runqueue
    to throttled, and the rt task is resched_task()ed and switched
    out, and idle is switched in since there are no non-rt tasks to
    run on that cpu.

- Eventually the do_sched_rt_period_timer() runs and un-throttles
    the rt runqueue, but we just exit the timer interrupt and go back
    to executing the idle task in the idle loop forever.

If we change the sched_rt_rq_enqueue() routine to use some of the code
from the CONFIG_RT_GROUP_SCHED enabled version of this same routine and
resched_task() the currently executing task (idle in our case) if it is
a lower priority task than the higher rt task in the now un-throttled
runqueue, the problem is no longer observed.

Signed-off-by: John Blackwood <john.blackwood@ccur.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_rt.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 998ba54b454..07d9b330790 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -199,6 +199,8 @@ static inline struct rt_rq *group_rt_rq(struct sched_rt_entity *rt_se)
 
 static inline void sched_rt_rq_enqueue(struct rt_rq *rt_rq)
 {
+	if (rt_rq->rt_nr_running)
+		resched_task(rq_of_rt_rq(rt_rq)->curr);
 }
 
 static inline void sched_rt_rq_dequeue(struct rt_rq *rt_rq)
-- 
GitLab


From 226a6ec31117113a3b775b6b8d63dc4487c2d333 Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Thu, 28 Aug 2008 17:28:46 +0800
Subject: [PATCH 549/869] Blackfin arch: sram: use 'unsigned long' for irqflags

Using just 'unsigned' will make flags an unsigned int. While this is
arguably not an error on blackfin where sizeof(int) == sizeof(long),
the patch is still justified on the grounds of principle.

The patch was generated using the Coccinelle semantic patch framework.

Cc: Julia Lawall <julia@diku.dk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 arch/blackfin/mm/blackfin_sram.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index 1ed1b15a391..4f5e887a0d9 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -379,7 +379,7 @@ EXPORT_SYMBOL(sram_free);
 
 void *l1_data_A_sram_alloc(size_t size)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr = NULL;
 
 	/* add mutex operation */
@@ -402,7 +402,7 @@ EXPORT_SYMBOL(l1_data_A_sram_alloc);
 
 int l1_data_A_sram_free(const void *addr)
 {
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
@@ -425,7 +425,7 @@ EXPORT_SYMBOL(l1_data_A_sram_free);
 void *l1_data_B_sram_alloc(size_t size)
 {
 #if L1_DATA_B_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
@@ -450,7 +450,7 @@ EXPORT_SYMBOL(l1_data_B_sram_alloc);
 int l1_data_B_sram_free(const void *addr)
 {
 #if L1_DATA_B_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
@@ -504,7 +504,7 @@ EXPORT_SYMBOL(l1_data_sram_free);
 void *l1_inst_sram_alloc(size_t size)
 {
 #if L1_CODE_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
@@ -529,7 +529,7 @@ EXPORT_SYMBOL(l1_inst_sram_alloc);
 int l1_inst_sram_free(const void *addr)
 {
 #if L1_CODE_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
@@ -551,7 +551,7 @@ EXPORT_SYMBOL(l1_inst_sram_free);
 /* L1 Scratchpad memory allocate function */
 void *l1sram_alloc(size_t size)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
@@ -569,7 +569,7 @@ void *l1sram_alloc(size_t size)
 /* L1 Scratchpad memory allocate function */
 void *l1sram_alloc_max(size_t *psize)
 {
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
@@ -587,7 +587,7 @@ void *l1sram_alloc_max(size_t *psize)
 /* L1 Scratchpad memory free function */
 int l1sram_free(const void *addr)
 {
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
@@ -605,7 +605,7 @@ int l1sram_free(const void *addr)
 void *l2_sram_alloc(size_t size)
 {
 #if L2_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	void *addr;
 
 	/* add mutex operation */
@@ -641,7 +641,7 @@ EXPORT_SYMBOL(l2_sram_zalloc);
 int l2_sram_free(const void *addr)
 {
 #if L2_LENGTH != 0
-	unsigned flags;
+	unsigned long flags;
 	int ret;
 
 	/* add mutex operation */
-- 
GitLab


From d310fb4bb73629840430cb13cb282915e49fef4b Mon Sep 17 00:00:00 2001
From: Michael Hennerich <michael.hennerich@analog.com>
Date: Thu, 28 Aug 2008 17:32:01 +0800
Subject: [PATCH 550/869] Blackfin arch: Fix PM building on BF52x: No ROTWE on
 BF52x, add USBWE

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
---
 .../mach-bf527/include/mach/defBF52x_base.h   | 185 +++++++++---------
 arch/blackfin/mach-common/ints-priority.c     |   2 +-
 2 files changed, 89 insertions(+), 98 deletions(-)

diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index fc69cf93f14..6ac2ed7026e 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -151,7 +151,7 @@
 #define TIMER7_CONFIG		0xFFC00670	/* Timer 7 Configuration Register  			*/
 #define TIMER7_COUNTER		0xFFC00674	/* Timer 7 Counter Register        			*/
 #define TIMER7_PERIOD		0xFFC00678	/* Timer 7 Period Register         			*/
-#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register       			*/   
+#define TIMER7_WIDTH		0xFFC0067C	/* Timer 7 Width Register       			*/
 
 #define TIMER_ENABLE		0xFFC00680	/* Timer Enable Register					*/
 #define TIMER_DISABLE		0xFFC00684	/* Timer Disable Register					*/
@@ -634,18 +634,9 @@
 /* PLL_DIV Macros														*/
 #define SET_SSEL(x)		((x)&0xF)		/* Set SSEL = 0-15 --> SCLK = VCO/SSEL	*/
 
-/* VR_CTL Masks																	*/
-#define	FREQ			0x0003	/* Switching Oscillator Frequency For Regulator	*/
+/* VR_CTL Masks	*/
+#define	FREQ			0x3000	/* Switching Oscillator Frequency For Regulator	*/
 #define	HIBERNATE		0x0000	/* 		Powerdown/Bypass On-Board Regulation	*/
-#define	FREQ_333		0x0001	/* 		Switching Frequency Is 333 kHz			*/
-#define	FREQ_667		0x0002	/* 		Switching Frequency Is 667 kHz			*/
-#define	FREQ_1000		0x0003	/* 		Switching Frequency Is 1 MHz			*/
-
-#define GAIN			0x000C	/* Voltage Level Gain	*/
-#define	GAIN_5			0x0000	/* 		GAIN = 5		*/
-#define	GAIN_10			0x0004	/* 		GAIN = 10		*/
-#define	GAIN_20			0x0008	/* 		GAIN = 20		*/
-#define	GAIN_50			0x000C	/* 		GAIN = 50		*/
 
 #define	VLEV			0x00F0	/* Internal Voltage Level					*/
 #define	VLEV_085 		0x0060	/* 		VLEV = 0.85 V (-5% - +10% Accuracy)	*/
@@ -660,7 +651,7 @@
 #define	VLEV_130		0x00F0	/* 		VLEV = 1.30 V (-5% - +10% Accuracy)	*/
 
 #define	WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate	*/
-#define	CANWE			0x0200	/* Enable CAN Wakeup From Hibernate			*/
+#define	USBWE			0x0200	/* Enable USB Wakeup From Hibernate			*/
 #define	PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate			*/
 #define	CLKBUFOE		0x4000	/* CLKIN Buffer Output Enable */
 #define	PHYCLKOE		CLKBUFOE	/* Alternative legacy name for the above */
@@ -697,16 +688,16 @@
 
 #define IRQ_ERROR1      0x00000002  /* Error Interrupt (DMA, DMARx Block, DMARx Overflow) */
 #define IRQ_ERROR2      0x00000004  /* Error Interrupt (CAN, Ethernet, SPORTx, PPI, SPI, UARTx) */
-#define IRQ_RTC			0x00000008	/* Real Time Clock Interrupt 						*/ 
-#define IRQ_DMA0		0x00000010	/* DMA Channel 0 (PPI) Interrupt 					*/ 
-#define IRQ_DMA3		0x00000020	/* DMA Channel 3 (SPORT0 RX) Interrupt 				*/ 
+#define IRQ_RTC			0x00000008	/* Real Time Clock Interrupt 						*/
+#define IRQ_DMA0		0x00000010	/* DMA Channel 0 (PPI) Interrupt 					*/
+#define IRQ_DMA3		0x00000020	/* DMA Channel 3 (SPORT0 RX) Interrupt 				*/
 #define IRQ_DMA4		0x00000040	/* DMA Channel 4 (SPORT0 TX) Interrupt 				*/
 #define IRQ_DMA5		0x00000080	/* DMA Channel 5 (SPORT1 RX) Interrupt 				*/
 
 #define IRQ_DMA6		0x00000100	/* DMA Channel 6 (SPORT1 TX) Interrupt 		 		*/
 #define IRQ_TWI			0x00000200	/* TWI Interrupt									*/
 #define IRQ_DMA7		0x00000400	/* DMA Channel 7 (SPI) Interrupt 					*/
-#define IRQ_DMA8		0x00000800	/* DMA Channel 8 (UART0 RX) Interrupt 				*/ 
+#define IRQ_DMA8		0x00000800	/* DMA Channel 8 (UART0 RX) Interrupt 				*/
 #define IRQ_DMA9		0x00001000	/* DMA Channel 9 (UART0 TX) Interrupt 				*/
 #define IRQ_DMA10		0x00002000	/* DMA Channel 10 (UART1 RX) Interrupt 				*/
 #define IRQ_DMA11		0x00004000	/* DMA Channel 11 (UART1 TX) Interrupt 				*/
@@ -801,7 +792,7 @@
 #define WDEV_NONE 0x0006 /* no event on roll over */
 #define WDEN 0x0FF0 /* enable watchdog */
 #define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */ 
+#define WDRO 0x8000 /* watchdog rolled over latch */
 
 /* depreciated WDOG_CTL Register Masks for legacy code */
 
@@ -882,7 +873,7 @@
 #define NINT		0x01		/* Pending Interrupt					*/
 #define IIR_TX_READY    0x02		/* UART_THR empty                               */
 #define IIR_RX_READY    0x04		/* Receive data ready                           */
-#define IIR_LINE_CHANGE 0x06		/* Receive line status    			*/ 
+#define IIR_LINE_CHANGE 0x06		/* Receive line status    			*/
 #define IIR_STATUS	0x06		/* Highest Priority Pending Interrupt	*/
 
 /* UARTx_GCTL Masks													*/
@@ -1638,12 +1629,12 @@
 
 /* entry addresses of the user-callable Boot ROM functions */
 
-#define _BOOTROM_RESET 0xEF000000 
-#define _BOOTROM_FINAL_INIT 0xEF000002 
+#define _BOOTROM_RESET 0xEF000000
+#define _BOOTROM_FINAL_INIT 0xEF000002
 #define _BOOTROM_DO_MEMORY_DMA 0xEF000006
-#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008 
-#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A 
-#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C 
+#define _BOOTROM_BOOT_DXE_FLASH 0xEF000008
+#define _BOOTROM_BOOT_DXE_SPI 0xEF00000A
+#define _BOOTROM_BOOT_DXE_TWI 0xEF00000C
 #define _BOOTROM_GET_DXE_ADDRESS_FLASH 0xEF000010
 #define _BOOTROM_GET_DXE_ADDRESS_SPI 0xEF000012
 #define _BOOTROM_GET_DXE_ADDRESS_TWI 0xEF000014
@@ -1771,71 +1762,71 @@
 /* Bit masks for CNT_CONFIG */
 
 #define                      CNTE  0x1        /* Counter Enable */
-#define                     nCNTE  0x0       
+#define                     nCNTE  0x0
 #define                      DEBE  0x2        /* Debounce Enable */
-#define                     nDEBE  0x0       
+#define                     nDEBE  0x0
 #define                    CDGINV  0x10       /* CDG Pin Polarity Invert */
-#define                   nCDGINV  0x0       
+#define                   nCDGINV  0x0
 #define                    CUDINV  0x20       /* CUD Pin Polarity Invert */
-#define                   nCUDINV  0x0       
+#define                   nCUDINV  0x0
 #define                    CZMINV  0x40       /* CZM Pin Polarity Invert */
-#define                   nCZMINV  0x0       
+#define                   nCZMINV  0x0
 #define                   CNTMODE  0x700      /* Counter Operating Mode */
 #define                      ZMZC  0x800      /* CZM Zeroes Counter Enable */
-#define                     nZMZC  0x0       
+#define                     nZMZC  0x0
 #define                   BNDMODE  0x3000     /* Boundary register Mode */
 #define                    INPDIS  0x8000     /* CUG and CDG Input Disable */
-#define                   nINPDIS  0x0       
+#define                   nINPDIS  0x0
 
 /* Bit masks for CNT_IMASK */
 
 #define                      ICIE  0x1        /* Illegal Gray/Binary Code Interrupt Enable */
-#define                     nICIE  0x0       
+#define                     nICIE  0x0
 #define                      UCIE  0x2        /* Up count Interrupt Enable */
-#define                     nUCIE  0x0       
+#define                     nUCIE  0x0
 #define                      DCIE  0x4        /* Down count Interrupt Enable */
-#define                     nDCIE  0x0       
+#define                     nDCIE  0x0
 #define                    MINCIE  0x8        /* Min Count Interrupt Enable */
-#define                   nMINCIE  0x0       
+#define                   nMINCIE  0x0
 #define                    MAXCIE  0x10       /* Max Count Interrupt Enable */
-#define                   nMAXCIE  0x0       
+#define                   nMAXCIE  0x0
 #define                   COV31IE  0x20       /* Bit 31 Overflow Interrupt Enable */
-#define                  nCOV31IE  0x0       
+#define                  nCOV31IE  0x0
 #define                   COV15IE  0x40       /* Bit 15 Overflow Interrupt Enable */
-#define                  nCOV15IE  0x0       
+#define                  nCOV15IE  0x0
 #define                   CZEROIE  0x80       /* Count to Zero Interrupt Enable */
-#define                  nCZEROIE  0x0       
+#define                  nCZEROIE  0x0
 #define                     CZMIE  0x100      /* CZM Pin Interrupt Enable */
-#define                    nCZMIE  0x0       
+#define                    nCZMIE  0x0
 #define                    CZMEIE  0x200      /* CZM Error Interrupt Enable */
-#define                   nCZMEIE  0x0       
+#define                   nCZMEIE  0x0
 #define                    CZMZIE  0x400      /* CZM Zeroes Counter Interrupt Enable */
-#define                   nCZMZIE  0x0       
+#define                   nCZMZIE  0x0
 
 /* Bit masks for CNT_STATUS */
 
 #define                      ICII  0x1        /* Illegal Gray/Binary Code Interrupt Identifier */
-#define                     nICII  0x0       
+#define                     nICII  0x0
 #define                      UCII  0x2        /* Up count Interrupt Identifier */
-#define                     nUCII  0x0       
+#define                     nUCII  0x0
 #define                      DCII  0x4        /* Down count Interrupt Identifier */
-#define                     nDCII  0x0       
+#define                     nDCII  0x0
 #define                    MINCII  0x8        /* Min Count Interrupt Identifier */
-#define                   nMINCII  0x0       
+#define                   nMINCII  0x0
 #define                    MAXCII  0x10       /* Max Count Interrupt Identifier */
-#define                   nMAXCII  0x0       
+#define                   nMAXCII  0x0
 #define                   COV31II  0x20       /* Bit 31 Overflow Interrupt Identifier */
-#define                  nCOV31II  0x0       
+#define                  nCOV31II  0x0
 #define                   COV15II  0x40       /* Bit 15 Overflow Interrupt Identifier */
-#define                  nCOV15II  0x0       
+#define                  nCOV15II  0x0
 #define                   CZEROII  0x80       /* Count to Zero Interrupt Identifier */
-#define                  nCZEROII  0x0       
+#define                  nCZEROII  0x0
 #define                     CZMII  0x100      /* CZM Pin Interrupt Identifier */
-#define                    nCZMII  0x0       
+#define                    nCZMII  0x0
 #define                    CZMEII  0x200      /* CZM Error Interrupt Identifier */
-#define                   nCZMEII  0x0       
+#define                   nCZMEII  0x0
 #define                    CZMZII  0x400      /* CZM Zeroes Counter Interrupt Identifier */
-#define                   nCZMZII  0x0       
+#define                   nCZMZII  0x0
 
 /* Bit masks for CNT_COMMAND */
 
@@ -1843,7 +1834,7 @@
 #define                    W1LMIN  0xf0       /* Load Min Register */
 #define                    W1LMAX  0xf00      /* Load Max Register */
 #define                  W1ZMONCE  0x1000     /* Enable CZM Clear Counter Once */
-#define                 nW1ZMONCE  0x0       
+#define                 nW1ZMONCE  0x0
 
 /* Bit masks for CNT_DEBOUNCE */
 
@@ -1853,15 +1844,15 @@
 
 #define                FUSE_FADDR  0x1ff      /* OTP/Fuse Address */
 #define                      FIEN  0x800      /* OTP/Fuse Interrupt Enable */
-#define                     nFIEN  0x0       
+#define                     nFIEN  0x0
 #define                  FTESTDEC  0x1000     /* OTP/Fuse Test Decoder */
-#define                 nFTESTDEC  0x0       
+#define                 nFTESTDEC  0x0
 #define                   FWRTEST  0x2000     /* OTP/Fuse Write Test */
-#define                  nFWRTEST  0x0       
+#define                  nFWRTEST  0x0
 #define                     FRDEN  0x4000     /* OTP/Fuse Read Enable */
-#define                    nFRDEN  0x0       
+#define                    nFRDEN  0x0
 #define                     FWREN  0x8000     /* OTP/Fuse Write Enable */
-#define                    nFWREN  0x0       
+#define                    nFWREN  0x0
 
 /* Bit masks for OTP_BEN */
 
@@ -1870,15 +1861,15 @@
 /* Bit masks for OTP_STATUS */
 
 #define                     FCOMP  0x1        /* OTP/Fuse Access Complete */
-#define                    nFCOMP  0x0       
+#define                    nFCOMP  0x0
 #define                    FERROR  0x2        /* OTP/Fuse Access Error */
-#define                   nFERROR  0x0       
+#define                   nFERROR  0x0
 #define                  MMRGLOAD  0x10       /* Memory Mapped Register Gasket Load */
-#define                 nMMRGLOAD  0x0       
+#define                 nMMRGLOAD  0x0
 #define                  MMRGLOCK  0x20       /* Memory Mapped Register Gasket Lock */
-#define                 nMMRGLOCK  0x0       
+#define                 nMMRGLOCK  0x0
 #define                    FPGMEN  0x40       /* OTP/Fuse Program Enable */
-#define                   nFPGMEN  0x0       
+#define                   nFPGMEN  0x0
 
 /* Bit masks for OTP_TIMING */
 
@@ -1892,42 +1883,42 @@
 /* Bit masks for SECURE_SYSSWT */
 
 #define                   EMUDABL  0x1        /* Emulation Disable. */
-#define                  nEMUDABL  0x0       
+#define                  nEMUDABL  0x0
 #define                   RSTDABL  0x2        /* Reset Disable */
-#define                  nRSTDABL  0x0       
+#define                  nRSTDABL  0x0
 #define                   L1IDABL  0x1c       /* L1 Instruction Memory Disable. */
 #define                  L1DADABL  0xe0       /* L1 Data Bank A Memory Disable. */
 #define                  L1DBDABL  0x700      /* L1 Data Bank B Memory Disable. */
 #define                   DMA0OVR  0x800      /* DMA0 Memory Access Override */
-#define                  nDMA0OVR  0x0       
+#define                  nDMA0OVR  0x0
 #define                   DMA1OVR  0x1000     /* DMA1 Memory Access Override */
-#define                  nDMA1OVR  0x0       
+#define                  nDMA1OVR  0x0
 #define                    EMUOVR  0x4000     /* Emulation Override */
-#define                   nEMUOVR  0x0       
+#define                   nEMUOVR  0x0
 #define                    OTPSEN  0x8000     /* OTP Secrets Enable. */
-#define                   nOTPSEN  0x0       
+#define                   nOTPSEN  0x0
 #define                    L2DABL  0x70000    /* L2 Memory Disable. */
 
 /* Bit masks for SECURE_CONTROL */
 
 #define                   SECURE0  0x1        /* SECURE 0 */
-#define                  nSECURE0  0x0       
+#define                  nSECURE0  0x0
 #define                   SECURE1  0x2        /* SECURE 1 */
-#define                  nSECURE1  0x0       
+#define                  nSECURE1  0x0
 #define                   SECURE2  0x4        /* SECURE 2 */
-#define                  nSECURE2  0x0       
+#define                  nSECURE2  0x0
 #define                   SECURE3  0x8        /* SECURE 3 */
-#define                  nSECURE3  0x0       
+#define                  nSECURE3  0x0
 
 /* Bit masks for SECURE_STATUS */
 
 #define                   SECMODE  0x3        /* Secured Mode Control State */
 #define                       NMI  0x4        /* Non Maskable Interrupt */
-#define                      nNMI  0x0       
+#define                      nNMI  0x0
 #define                   AFVALID  0x8        /* Authentication Firmware Valid */
-#define                  nAFVALID  0x0       
+#define                  nAFVALID  0x0
 #define                    AFEXIT  0x10       /* Authentication Firmware Exit */
-#define                   nAFEXIT  0x0       
+#define                   nAFEXIT  0x0
 #define                   SECSTAT  0xe0       /* Secure Status */
 
 /* Bit masks for NFC_CTL */
@@ -1935,60 +1926,60 @@
 #define                    WR_DLY  0xf        /* Write Strobe Delay */
 #define                    RD_DLY  0xf0       /* Read Strobe Delay */
 #define                    NWIDTH  0x100      /* NAND Data Width */
-#define                   nNWIDTH  0x0       
+#define                   nNWIDTH  0x0
 #define                   PG_SIZE  0x200      /* Page Size */
-#define                  nPG_SIZE  0x0       
+#define                  nPG_SIZE  0x0
 
 /* Bit masks for NFC_STAT */
 
 #define                     NBUSY  0x1        /* Not Busy */
-#define                    nNBUSY  0x0       
+#define                    nNBUSY  0x0
 #define                   WB_FULL  0x2        /* Write Buffer Full */
-#define                  nWB_FULL  0x0       
+#define                  nWB_FULL  0x0
 #define                PG_WR_STAT  0x4        /* Page Write Pending */
-#define               nPG_WR_STAT  0x0       
+#define               nPG_WR_STAT  0x0
 #define                PG_RD_STAT  0x8        /* Page Read Pending */
-#define               nPG_RD_STAT  0x0       
+#define               nPG_RD_STAT  0x0
 #define                  WB_EMPTY  0x10       /* Write Buffer Empty */
-#define                 nWB_EMPTY  0x0       
+#define                 nWB_EMPTY  0x0
 
 /* Bit masks for NFC_IRQSTAT */
 
 #define                  NBUSYIRQ  0x1        /* Not Busy IRQ */
-#define                 nNBUSYIRQ  0x0       
+#define                 nNBUSYIRQ  0x0
 #define                    WB_OVF  0x2        /* Write Buffer Overflow */
-#define                   nWB_OVF  0x0       
+#define                   nWB_OVF  0x0
 #define                   WB_EDGE  0x4        /* Write Buffer Edge Detect */
-#define                  nWB_EDGE  0x0       
+#define                  nWB_EDGE  0x0
 #define                    RD_RDY  0x8        /* Read Data Ready */
-#define                   nRD_RDY  0x0       
+#define                   nRD_RDY  0x0
 #define                   WR_DONE  0x10       /* Page Write Done */
-#define                  nWR_DONE  0x0       
+#define                  nWR_DONE  0x0
 
 /* Bit masks for NFC_IRQMASK */
 
 #define              MASK_BUSYIRQ  0x1        /* Mask Not Busy IRQ */
-#define             nMASK_BUSYIRQ  0x0       
+#define             nMASK_BUSYIRQ  0x0
 #define                MASK_WBOVF  0x2        /* Mask Write Buffer Overflow */
-#define               nMASK_WBOVF  0x0       
+#define               nMASK_WBOVF  0x0
 #define              MASK_WBEMPTY  0x4        /* Mask Write Buffer Empty */
-#define             nMASK_WBEMPTY  0x0       
+#define             nMASK_WBEMPTY  0x0
 #define                MASK_RDRDY  0x8        /* Mask Read Data Ready */
-#define               nMASK_RDRDY  0x0       
+#define               nMASK_RDRDY  0x0
 #define               MASK_WRDONE  0x10       /* Mask Write Done */
-#define              nMASK_WRDONE  0x0       
+#define              nMASK_WRDONE  0x0
 
 /* Bit masks for NFC_RST */
 
 #define                   ECC_RST  0x1        /* ECC (and NFC counters) Reset */
-#define                  nECC_RST  0x0       
+#define                  nECC_RST  0x0
 
 /* Bit masks for NFC_PGCTL */
 
 #define               PG_RD_START  0x1        /* Page Read Start */
-#define              nPG_RD_START  0x0       
+#define              nPG_RD_START  0x0
 #define               PG_WR_START  0x2        /* Page Write Start */
-#define              nPG_WR_START  0x0       
+#define              nPG_WR_START  0x0
 
 /* Bit masks for NFC_ECC0 */
 
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 6dac86995d1..5fa536727c6 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -216,7 +216,7 @@ int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 	wakeup |= KPADWE;
 	break;
 #endif
-#ifdef IRQ_CNT
+#ifdef CONFIG_BF54x
 	case IRQ_CNT:
 	wakeup |= ROTWE;
 	break;
-- 
GitLab


From cc2991cf15ae92fa30b3ea9f56a8a5a337bd33c7 Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Tue, 19 Aug 2008 12:33:03 +0200
Subject: [PATCH 551/869] sched: rt-bandwidth accounting fix

It fixes an accounting bug where we would continue accumulating runtime
even though the bandwidth control is disabled. This would lead to very long
throttle periods once bandwidth control gets turned on again.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/sched_rt.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 07d9b330790..552310798da 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -440,9 +440,6 @@ static int sched_rt_runtime_exceeded(struct rt_rq *rt_rq)
 {
 	u64 runtime = sched_rt_runtime(rt_rq);
 
-	if (runtime == RUNTIME_INF)
-		return 0;
-
 	if (rt_rq->rt_throttled)
 		return rt_rq_throttled(rt_rq);
 
@@ -493,9 +490,11 @@ static void update_curr_rt(struct rq *rq)
 		rt_rq = rt_rq_of_se(rt_se);
 
 		spin_lock(&rt_rq->rt_runtime_lock);
-		rt_rq->rt_time += delta_exec;
-		if (sched_rt_runtime_exceeded(rt_rq))
-			resched_task(curr);
+		if (sched_rt_runtime(rt_rq) != RUNTIME_INF) {
+			rt_rq->rt_time += delta_exec;
+			if (sched_rt_runtime_exceeded(rt_rq))
+				resched_task(curr);
+		}
 		spin_unlock(&rt_rq->rt_runtime_lock);
 	}
 }
-- 
GitLab


From 838726c4756813576078203eb7e1e219db0da870 Mon Sep 17 00:00:00 2001
From: Jeff Layton <jlayton@redhat.com>
Date: Thu, 28 Aug 2008 07:54:59 -0400
Subject: [PATCH 552/869] cifs: fix O_APPEND on directio mounts

The direct I/O write codepath for CIFS is done through
cifs_user_write(). That function does not currently call
generic_write_checks() so the file position isn't being properly set
when the file is opened with O_APPEND.  It's also not doing the other
"normal" checks that should be done for a write call.

The problem is currently that when you open a file with O_APPEND on a
mount with the directio mount option, the file position is set to the
beginning of the file. This makes any subsequent writes clobber the data
in the file starting at the beginning.

This seems to fix the problem in cursory testing. It is, however
important to note that NFS disallows the combination of
(O_DIRECT|O_APPEND). If my understanding is correct, the concern is
races with multiple clients appending to a file clobbering each others'
data. Since the write model for CIFS and NFS is pretty similar in this
regard, CIFS is probably subject to the same sort of races. What's
unclear to me is why this is a particular problem with O_DIRECT and not
with buffered writes...

Regardless, disallowing O_APPEND on an entire mount is probably not
reasonable, so we'll probably just have to deal with it and reevaluate
this flag combination when we get proper support for O_DIRECT. In the
meantime this patch at least fixes the existing problem.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/file.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index ff14d14903a..cbefe1f1f9f 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -833,6 +833,10 @@ ssize_t cifs_user_write(struct file *file, const char __user *write_data,
 		return -EBADF;
 	open_file = (struct cifsFileInfo *) file->private_data;
 
+	rc = generic_write_checks(file, poffset, &write_size, 0);
+	if (rc)
+		return rc;
+
 	xid = GetXid();
 
 	if (*poffset > file->f_path.dentry->d_inode->i_size)
-- 
GitLab


From 2e655021b8d50b5d90ce442f3de6bf3667729910 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 28 Aug 2008 15:30:06 +0000
Subject: [PATCH 553/869] [CIFS] update cifs change log

Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/CHANGES |  5 ++++-
 fs/cifs/README  | 14 ++++++++++++--
 2 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index f9e4ad97a79..06e521a945c 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -9,7 +9,10 @@ files (e.g. "cp -a") to Windows servers.  For mkdir and create honor setgid bit
 on parent directory when server supports Unix Extensions but not POSIX
 create. Update cifs.upcall version to handle new Kerberos sec flags
 (this requires update of cifs.upcall program from Samba).  Fix memory leak
-on dns_upcall (resolving DFS referralls).
+on dns_upcall (resolving DFS referralls).  Fix plain text password
+authentication (requires setting SecurityFlags to 0x30030 to enable
+lanman and plain text though).  Fix writes to be at correct offset when
+file is open with O_APPEND and file is on a directio (forcediretio) mount.
 
 Version 1.53
 ------------
diff --git a/fs/cifs/README b/fs/cifs/README
index 68b5c1169d9..bd2343d4c6a 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -542,10 +542,20 @@ SecurityFlags		Flags which control security negotiation and
 			hashing mechanisms (as "must use") on the other hand 
 			does not make much sense. Default flags are 
 				0x07007 
-			(NTLM, NTLMv2 and packet signing allowed).  Maximum 
+			(NTLM, NTLMv2 and packet signing allowed).  The maximum 
 			allowable flags if you want to allow mounts to servers
 			using weaker password hashes is 0x37037 (lanman,
-			plaintext, ntlm, ntlmv2, signing allowed):
+			plaintext, ntlm, ntlmv2, signing allowed).  Some
+			SecurityFlags require the corresponding menuconfig
+			options to be enabled (lanman and plaintext require
+			CONFIG_CIFS_WEAK_PW_HASH for example).  Enabling
+			plaintext authentication currently requires also
+			enabling lanman authentication in the security flags
+			because the cifs module only supports sending
+			laintext passwords using the older lanman dialect
+			form of the session setup SMB.  (e.g. for authentication
+			using plain text passwords, set the SecurityFlags
+			to 0x30030):
  
 			may use packet signing 				0x00001
 			must use packet signing				0x01001
-- 
GitLab


From c76da9da1fffa6de263486df54950eb328d58f71 Mon Sep 17 00:00:00 2001
From: Steve French <sfrench@us.ibm.com>
Date: Thu, 28 Aug 2008 15:32:22 +0000
Subject: [PATCH 554/869] [CIFS] Turn off Unicode during session establishment
 for plaintext authentication

LANMAN session setup did not support Unicode (after session setup, unicode can
still be used though).

Fixes samba bug# 5319

CC: Jeff Layton <jlayton@redhat.com>
CC: Stable Kernel <stable@vger.kernel.org>
Signed-off-by: Steve French <sfrench@us.ibm.com>
---
 fs/cifs/sess.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index b537fad3bf5..252fdc0567f 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -409,6 +409,8 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
 #ifdef CONFIG_CIFS_WEAK_PW_HASH
 		char lnm_session_key[CIFS_SESS_KEY_SIZE];
 
+		pSMB->req.hdr.Flags2 &= ~SMBFLG2_UNICODE;
+
 		/* no capabilities flags in old lanman negotiation */
 
 		pSMB->old_req.PasswordLength = cpu_to_le16(CIFS_SESS_KEY_SIZE);
-- 
GitLab


From 212496fd9a5f5db0a037a2a8c6fde2d2bd93c1d7 Mon Sep 17 00:00:00 2001
From: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Date: Thu, 28 Aug 2008 00:00:23 +0100
Subject: [PATCH 555/869] [ARM] 5226/1: remove unmatched comment end.

remove unmatched comment end.

Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/lib/sha1.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
index ff6ece487ff..67c2bf4774b 100644
--- a/arch/arm/lib/sha1.S
+++ b/arch/arm/lib/sha1.S
@@ -29,7 +29,7 @@ ENTRY(sha_transform)
 	stmfd	sp!, {r4 - r8, lr}
 
 	@ for (i = 0; i < 16; i++)
-	@         W[i] = be32_to_cpu(in[i]); */
+	@         W[i] = be32_to_cpu(in[i]);
 
 #ifdef __ARMEB__
 	mov	r4, r0
-- 
GitLab


From 9662e0802445a1f56cef11bbd0d520b07238424a Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Wed, 27 Aug 2008 21:04:49 -0700
Subject: [PATCH 556/869] ACPI: thinkpad-acpi: wan radio control is not
 experimental

The WWAN radio control has been working well for over three years,
and is no longer experimental.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 Documentation/laptops/thinkpad-acpi.txt | 11 +++--------
 drivers/misc/thinkpad_acpi.c            |  1 -
 2 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 02dc748b76c..71f0fe1fc1b 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -44,7 +44,7 @@ detailed description):
 	- LCD brightness control
 	- Volume control
 	- Fan control and monitoring: fan speed, fan enable/disable
-	- Experimental: WAN enable and disable
+	- WAN enable and disable
 
 A compatibility table by model and feature is maintained on the web
 site, http://ibm-acpi.sf.net/. I appreciate any success or failure
@@ -1375,18 +1375,13 @@ with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255
 would be the safest choice, though).
 
 
-EXPERIMENTAL: WAN
------------------
+WAN
+---
 
 procfs: /proc/acpi/ibm/wan
 sysfs device attribute: wwan_enable (deprecated)
 sysfs rfkill class: switch "tpacpi_wwan_sw"
 
-This feature is marked EXPERIMENTAL because the implementation
-directly accesses hardware registers and may not work as expected. USE
-WITH CAUTION! To use this feature, you need to supply the
-experimental=1 parameter when loading the module.
-
 This feature shows the presence and current state of a W-WAN (Sierra
 Wireless EV-DO) device.
 
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index d3eb7903c34..6b9300779a4 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -3086,7 +3086,6 @@ static struct ibm_struct wan_driver_data = {
 	.read = wan_read,
 	.write = wan_write,
 	.exit = wan_exit,
-	.flags.experimental = 1,
 };
 
 /*************************************************************************
-- 
GitLab


From 41108eb10142e0552f2de1e4c0675b108c5f018f Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Thu, 28 Aug 2008 14:39:12 +0200
Subject: [PATCH 557/869] ftrace: disable tracing for hibernation

In accordance with commit f42ac38c59e0a03d6da0c24a63fb211393f484b0
("ftrace: disable tracing for suspend to ram"), disable tracing
around the suspend code in hibernation code paths.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/power/disk.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index f011e0870b5..bbd85c60f74 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -21,6 +21,7 @@
 #include <linux/console.h>
 #include <linux/cpu.h>
 #include <linux/freezer.h>
+#include <linux/ftrace.h>
 
 #include "power.h"
 
@@ -255,7 +256,7 @@ static int create_image(int platform_mode)
 
 int hibernation_snapshot(int platform_mode)
 {
-	int error;
+	int error, ftrace_save;
 
 	/* Free memory before shutting down devices. */
 	error = swsusp_shrink_memory();
@@ -267,6 +268,7 @@ int hibernation_snapshot(int platform_mode)
 		goto Close;
 
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	error = device_suspend(PMSG_FREEZE);
 	if (error)
 		goto Recover_platform;
@@ -296,6 +298,7 @@ int hibernation_snapshot(int platform_mode)
  Resume_devices:
 	device_resume(in_suspend ?
 		(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
  Close:
 	platform_end(platform_mode);
@@ -366,10 +369,11 @@ static int resume_target_kernel(void)
 
 int hibernation_restore(int platform_mode)
 {
-	int error;
+	int error, ftrace_save;
 
 	pm_prepare_console();
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	error = device_suspend(PMSG_QUIESCE);
 	if (error)
 		goto Finish;
@@ -384,6 +388,7 @@ int hibernation_restore(int platform_mode)
 	platform_restore_cleanup(platform_mode);
 	device_resume(PMSG_RECOVER);
  Finish:
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
 	pm_restore_console();
 	return error;
@@ -396,7 +401,7 @@ int hibernation_restore(int platform_mode)
 
 int hibernation_platform_enter(void)
 {
-	int error;
+	int error, ftrace_save;
 
 	if (!hibernation_ops)
 		return -ENOSYS;
@@ -411,6 +416,7 @@ int hibernation_platform_enter(void)
 		goto Close;
 
 	suspend_console();
+	ftrace_save = __ftrace_enabled_save();
 	error = device_suspend(PMSG_HIBERNATE);
 	if (error) {
 		if (hibernation_ops->recover)
@@ -445,6 +451,7 @@ int hibernation_platform_enter(void)
 	hibernation_ops->finish();
  Resume_devices:
 	device_resume(PMSG_RESTORE);
+	__ftrace_enabled_restore(ftrace_save);
 	resume_console();
  Close:
 	hibernation_ops->end();
-- 
GitLab


From 24342c34a022ee90839873d91396045e12ef1090 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 28 Aug 2008 15:52:02 -0700
Subject: [PATCH 558/869] Linux 2.6.27-rc5

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 2e15e0b4483..f448e0082eb 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 27
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Rotary Wombat
 
 # *DOCUMENTATION*
-- 
GitLab


From e3c71a32915fabb095de7108c22672e457631a08 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Thu, 28 Aug 2008 21:02:58 -0700
Subject: [PATCH 559/869] sparc: Fix resource flags for PCI children in OF
 device tree.

When a device is under an EBUS or ISA bus, the resource flags
don't get set properly.

Fix this by re-evaluating the resource flags at each level of
bus as we apply ranges on the way to the root.  And let PCI
override any existing flags setting, but don't let the
default flags calculator make such overrides.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc/kernel/of_device.c   | 19 ++++++++++++++-----
 arch/sparc64/kernel/of_device.c | 20 ++++++++++++++------
 2 files changed, 28 insertions(+), 11 deletions(-)

diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c
index cc4c235c4f5..c481d45f97b 100644
--- a/arch/sparc/kernel/of_device.c
+++ b/arch/sparc/kernel/of_device.c
@@ -70,7 +70,7 @@ struct of_bus {
 				       int *addrc, int *sizec);
 	int		(*map)(u32 *addr, const u32 *range,
 			       int na, int ns, int pna);
-	unsigned int	(*get_flags)(const u32 *addr);
+	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
 };
 
 /*
@@ -130,8 +130,10 @@ static int of_bus_default_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
 {
+	if (flags)
+		return flags;
 	return IORESOURCE_MEM;
 }
 
@@ -194,17 +196,21 @@ static int of_bus_pci_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 {
-	unsigned int flags = 0;
 	u32 w = addr[0];
 
+	/* For PCI, we override whatever child busses may have used.  */
+	flags = 0;
 	switch((w >> 24) & 0x03) {
 	case 0x01:
 		flags |= IORESOURCE_IO;
+		break;
+
 	case 0x02: /* 32 bits */
 	case 0x03: /* 64 bits */
 		flags |= IORESOURCE_MEM;
+		break;
 	}
 	if (w & 0x40000000)
 		flags |= IORESOURCE_PREFETCH;
@@ -362,10 +368,11 @@ static void __init build_device_resources(struct of_device *op,
 		int pna, pns;
 
 		size = of_read_addr(reg + na, ns);
-		flags = bus->get_flags(reg);
 
 		memcpy(addr, reg, na * 4);
 
+		flags = bus->get_flags(reg, 0);
+
 		/* If the immediate parent has no ranges property to apply,
 		 * just use a 1<->1 mapping.
 		 */
@@ -393,6 +400,8 @@ static void __init build_device_resources(struct of_device *op,
 					       dna, dns, pna))
 				break;
 
+			flags = pbus->get_flags(addr, flags);
+
 			dna = pna;
 			dns = pns;
 			dbus = pbus;
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index f8b50cbf4bf..f845f150f56 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -96,7 +96,7 @@ struct of_bus {
 				       int *addrc, int *sizec);
 	int		(*map)(u32 *addr, const u32 *range,
 			       int na, int ns, int pna);
-	unsigned int	(*get_flags)(const u32 *addr);
+	unsigned long	(*get_flags)(const u32 *addr, unsigned long);
 };
 
 /*
@@ -156,8 +156,10 @@ static int of_bus_default_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_default_get_flags(const u32 *addr)
+static unsigned long of_bus_default_get_flags(const u32 *addr, unsigned long flags)
 {
+	if (flags)
+		return flags;
 	return IORESOURCE_MEM;
 }
 
@@ -249,17 +251,21 @@ static int of_bus_pci_map(u32 *addr, const u32 *range,
 	return 0;
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
+static unsigned long of_bus_pci_get_flags(const u32 *addr, unsigned long flags)
 {
-	unsigned int flags = 0;
 	u32 w = addr[0];
 
+	/* For PCI, we override whatever child busses may have used.  */
+	flags = 0;
 	switch((w >> 24) & 0x03) {
 	case 0x01:
 		flags |= IORESOURCE_IO;
+		break;
+
 	case 0x02: /* 32 bits */
 	case 0x03: /* 64 bits */
 		flags |= IORESOURCE_MEM;
+		break;
 	}
 	if (w & 0x40000000)
 		flags |= IORESOURCE_PREFETCH;
@@ -478,10 +484,10 @@ static void __init build_device_resources(struct of_device *op,
 		int pna, pns;
 
 		size = of_read_addr(reg + na, ns);
-		flags = bus->get_flags(reg);
-
 		memcpy(addr, reg, na * 4);
 
+		flags = bus->get_flags(addr, 0);
+
 		if (use_1to1_mapping(pp)) {
 			result = of_read_addr(addr, na);
 			goto build_res;
@@ -506,6 +512,8 @@ static void __init build_device_resources(struct of_device *op,
 					       dna, dns, pna))
 				break;
 
+			flags = pbus->get_flags(addr, flags);
+
 			dna = pna;
 			dns = pns;
 			dbus = pbus;
-- 
GitLab


From bb23b431db7405f6d79f989ad0236bf6428ba1cb Mon Sep 17 00:00:00 2001
From: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Date: Fri, 29 Aug 2008 11:47:07 +0200
Subject: [PATCH 560/869] remove blk_register_filter and blk_unregister_filter
 in gendisk

This patch remove blk_register_filter and blk_unregister_filter in
gendisk, and adds them to sd.c, sr.c. and ide-cd.c

The commit abf5439370491dd6fbb4fe1a7939680d2a9bc9d4 moved cmdfilter
from gendisk to request_queue. It turned out that in some subsystems
multiple gendisks share a single request_queue. So we get:

Using physmap partition information
Creating 3 MTD partitions on "physmap-flash":
0x00000000-0x01c00000 : "User FS"
0x01c00000-0x01c40000 : "booter"
kobject (8511c410): tried to init an initialized object, something is seriously wrong.
Call Trace:
[<8036644c>] dump_stack+0x8/0x34
[<8021f050>] kobject_init+0x50/0xcc
[<8021fa18>] kobject_init_and_add+0x24/0x58
[<8021d20c>] blk_register_filter+0x4c/0x64
[<8021c194>] add_disk+0x78/0xe0
[<8027d14c>] add_mtd_blktrans_dev+0x254/0x278
[<8027c8f0>] blktrans_notify_add+0x40/0x78
[<80279c00>] add_mtd_device+0xd0/0x150
[<8027b090>] add_mtd_partitions+0x568/0x5d8
[<80285458>] physmap_flash_probe+0x2ac/0x334
[<802644f8>] driver_probe_device+0x12c/0x244
[<8026465c>] __driver_attach+0x4c/0x84
[<80263c64>] bus_for_each_dev+0x58/0xac
[<802633ec>] bus_add_driver+0xc4/0x24c
[<802648e0>] driver_register+0xcc/0x184
[<80100460>] _stext+0x60/0x1bc

In the long term, we need to fix such subsystems but we need a quick
fix now. This patch add the command filter support to only sd and sr
though it might be useful for other SG_IO users (such as cciss).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Reported-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/cmd-filter.c   | 3 ++-
 block/genhd.c        | 2 --
 drivers/ide/ide-cd.c | 2 ++
 drivers/scsi/sd.c    | 2 ++
 drivers/scsi/sr.c    | 2 ++
 5 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/block/cmd-filter.c b/block/cmd-filter.c
index 1d4026206ac..228b6447e89 100644
--- a/block/cmd-filter.c
+++ b/block/cmd-filter.c
@@ -223,6 +223,7 @@ int blk_register_filter(struct gendisk *disk)
 
 	return 0;
 }
+EXPORT_SYMBOL(blk_register_filter);
 
 void blk_unregister_filter(struct gendisk *disk)
 {
@@ -231,4 +232,4 @@ void blk_unregister_filter(struct gendisk *disk)
 	kobject_put(&filter->kobj);
 	kobject_put(disk->holder_dir->parent);
 }
-
+EXPORT_SYMBOL(blk_unregister_filter);
diff --git a/block/genhd.c b/block/genhd.c
index 656c2c7abf9..d9743ff6789 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -190,7 +190,6 @@ void add_disk(struct gendisk *disk)
 			    disk->minors, NULL, exact_match, exact_lock, disk);
 	register_disk(disk);
 	blk_register_queue(disk);
-	blk_register_filter(disk);
 
 	bdi = &disk->queue->backing_dev_info;
 	bdi_register_dev(bdi, MKDEV(disk->major, disk->first_minor));
@@ -203,7 +202,6 @@ EXPORT_SYMBOL(del_gendisk);	/* in partitions/check.c */
 
 void unlink_gendisk(struct gendisk *disk)
 {
-	blk_unregister_filter(disk);
 	sysfs_remove_link(&disk->dev.kobj, "bdi");
 	bdi_unregister(&disk->queue->backing_dev_info);
 	blk_unregister_queue(disk);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 49a8c589e34..f1489999cf9 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -1933,6 +1933,7 @@ static void ide_cd_remove(ide_drive_t *drive)
 
 	ide_proc_unregister_driver(drive, info->driver);
 
+	blk_unregister_filter(info->disk);
 	del_gendisk(info->disk);
 
 	ide_cd_put(info);
@@ -2158,6 +2159,7 @@ static int ide_cd_probe(ide_drive_t *drive)
 	g->fops = &idecd_ops;
 	g->flags |= GENHD_FL_REMOVABLE;
 	add_disk(g);
+	blk_register_filter(g);
 	return 0;
 
 out_free_cd:
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index e5e7d785645..2a2bc89aba8 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1875,6 +1875,7 @@ static int sd_probe(struct device *dev)
 
 	dev_set_drvdata(dev, sdkp);
 	add_disk(gd);
+	blk_register_filter(gd);
 	sd_dif_config_host(sdkp);
 
 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
@@ -1908,6 +1909,7 @@ static int sd_remove(struct device *dev)
 	struct scsi_disk *sdkp = dev_get_drvdata(dev);
 
 	device_del(&sdkp->dev);
+	blk_unregister_filter(sdkp->disk);
 	del_gendisk(sdkp->disk);
 	sd_shutdown(dev);
 
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index 27f5bfd1def..3292965bfd8 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -656,6 +656,7 @@ static int sr_probe(struct device *dev)
 	dev_set_drvdata(dev, cd);
 	disk->flags |= GENHD_FL_REMOVABLE;
 	add_disk(disk);
+	blk_register_filter(disk);
 
 	sdev_printk(KERN_DEBUG, sdev,
 		    "Attached scsi CD-ROM %s\n", cd->cdi.name);
@@ -894,6 +895,7 @@ static int sr_remove(struct device *dev)
 {
 	struct scsi_cd *cd = dev_get_drvdata(dev);
 
+	blk_unregister_filter(cd->disk);
 	del_gendisk(cd->disk);
 
 	mutex_lock(&sr_ref_mutex);
-- 
GitLab


From df91bc23dcb052ff2da71b3482bf3c5fbf4b8a53 Mon Sep 17 00:00:00 2001
From: Clemens Ladisch <clemens@ladisch.de>
Date: Fri, 29 Aug 2008 13:08:34 +0200
Subject: [PATCH 561/869] ALSA: oxygen: fix distorted output on AK4396-based
 cards

When changing the sample rate, the CMI8788's master clock output becomes
unstable for a short time.  The AK4396 needs the master clock to do SPI
writes, so writing to an AK4396 control register directly after a sample
rate change will garble the value.  In our case, this leads to the DACs
being misconfigured to I2S sample format, which results in a wrong
output level and horrible distortions on samples louder than -6 dB.

To fix this, we need to wait until the new master clock signal has
become stable before doing SPI writes.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/oxygen/hifier.c | 4 ++++
 sound/pci/oxygen/oxygen.c | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/sound/pci/oxygen/hifier.c b/sound/pci/oxygen/hifier.c
index 7442460583d..dad393ae040 100644
--- a/sound/pci/oxygen/hifier.c
+++ b/sound/pci/oxygen/hifier.c
@@ -17,6 +17,7 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
+#include <linux/delay.h>
 #include <linux/pci.h>
 #include <sound/control.h>
 #include <sound/core.h>
@@ -107,6 +108,9 @@ static void set_ak4396_params(struct oxygen *chip,
 	else
 		value |= AK4396_DFS_QUAD;
 	data->ak4396_ctl2 = value;
+
+	msleep(1); /* wait for the new MCLK to become stable */
+
 	ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB);
 	ak4396_write(chip, AK4396_CONTROL_2, value);
 	ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
diff --git a/sound/pci/oxygen/oxygen.c b/sound/pci/oxygen/oxygen.c
index 7c8ae31eb46..c5829d30ef8 100644
--- a/sound/pci/oxygen/oxygen.c
+++ b/sound/pci/oxygen/oxygen.c
@@ -28,6 +28,7 @@
  * GPIO 1 -> DFS1 of AK5385
  */
 
+#include <linux/delay.h>
 #include <linux/mutex.h>
 #include <linux/pci.h>
 #include <sound/ac97_codec.h>
@@ -213,6 +214,9 @@ static void set_ak4396_params(struct oxygen *chip,
 	else
 		value |= AK4396_DFS_QUAD;
 	data->ak4396_ctl2 = value;
+
+	msleep(1); /* wait for the new MCLK to become stable */
+
 	for (i = 0; i < 4; ++i) {
 		ak4396_write(chip, i,
 			     AK4396_CONTROL_1, AK4396_DIF_24_MSB);
-- 
GitLab


From 3cc76caa98b092a8fb3e7b4303c70f847db0651f Mon Sep 17 00:00:00 2001
From: Yang Hongyang <yanghy@cn.fujitsu.com>
Date: Fri, 29 Aug 2008 14:06:51 -0700
Subject: [PATCH 562/869] ipv6: When we droped a packet, we should return
 NET_RX_DROP instead of 0

Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv6/raw.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 01d47674f7e..e53e493606c 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -377,14 +377,14 @@ static inline int rawv6_rcv_skb(struct sock * sk, struct sk_buff * skb)
 	    skb_checksum_complete(skb)) {
 		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
-		return 0;
+		return NET_RX_DROP;
 	}
 
 	/* Charge it to the socket. */
 	if (sock_queue_rcv_skb(sk,skb)<0) {
 		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
-		return 0;
+		return NET_RX_DROP;
 	}
 
 	return 0;
@@ -429,7 +429,7 @@ int rawv6_rcv(struct sock *sk, struct sk_buff *skb)
 		if (skb_checksum_complete(skb)) {
 			atomic_inc(&sk->sk_drops);
 			kfree_skb(skb);
-			return 0;
+			return NET_RX_DROP;
 		}
 	}
 
-- 
GitLab


From 102396ae65108b026e4e1868e30fa013f45a169e Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Fri, 29 Aug 2008 14:21:52 -0700
Subject: [PATCH 563/869] pkt_sched: Fix locking of qdisc_root with
 qdisc_root_sleeping_lock()

Use qdisc_root_sleeping_lock() instead of qdisc_root_lock() where
appropriate. The only difference is while dev is deactivated, when
currently we can use a sleeping qdisc with the lock of noop_qdisc.
This shouldn't be dangerous since after deactivation root lock could
be used only by gen_estimator code, but looks wrong anyway.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/sched/cls_api.c   | 2 +-
 net/sched/cls_route.c | 2 +-
 net/sched/sch_api.c   | 8 ++++----
 net/sched/sch_cbq.c   | 2 +-
 net/sched/sch_htb.c   | 4 ++--
 net/sched/sch_netem.c | 2 +-
 net/sched/sch_teql.c  | 2 +-
 7 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 5cafdd4c801..8eb79e92e94 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -205,7 +205,7 @@ replay:
 		}
 	}
 
-	root_lock = qdisc_root_lock(q);
+	root_lock = qdisc_root_sleeping_lock(q);
 
 	if (tp == NULL) {
 		/* Proto-tcf does not exist, create new one */
diff --git a/net/sched/cls_route.c b/net/sched/cls_route.c
index 481260a4f10..e3d8455eebc 100644
--- a/net/sched/cls_route.c
+++ b/net/sched/cls_route.c
@@ -75,7 +75,7 @@ static __inline__ int route4_fastmap_hash(u32 id, int iif)
 static inline
 void route4_reset_fastmap(struct Qdisc *q, struct route4_head *head, u32 id)
 {
-	spinlock_t *root_lock = qdisc_root_lock(q);
+	spinlock_t *root_lock = qdisc_root_sleeping_lock(q);
 
 	spin_lock_bh(root_lock);
 	memset(head->fastmap, 0, sizeof(head->fastmap));
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 506b709510b..1122c952aa9 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1169,8 +1169,8 @@ static int tc_fill_qdisc(struct sk_buff *skb, struct Qdisc *q, u32 clid,
 	if (q->stab && qdisc_dump_stab(skb, q->stab) < 0)
 		goto nla_put_failure;
 
-	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
-					 TCA_XSTATS, qdisc_root_lock(q), &d) < 0)
+	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS,
+					 qdisc_root_sleeping_lock(q), &d) < 0)
 		goto nla_put_failure;
 
 	if (q->ops->dump_stats && q->ops->dump_stats(q, &d) < 0)
@@ -1461,8 +1461,8 @@ static int tc_fill_tclass(struct sk_buff *skb, struct Qdisc *q,
 	if (cl_ops->dump && cl_ops->dump(q, cl, skb, tcm) < 0)
 		goto nla_put_failure;
 
-	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
-					 TCA_XSTATS, qdisc_root_lock(q), &d) < 0)
+	if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS, TCA_XSTATS,
+					 qdisc_root_sleeping_lock(q), &d) < 0)
 		goto nla_put_failure;
 
 	if (cl_ops->dump_stats && cl_ops->dump_stats(q, cl, &d) < 0)
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 9b720adedea..8b06fa90048 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -1754,7 +1754,7 @@ static void cbq_put(struct Qdisc *sch, unsigned long arg)
 
 	if (--cl->refcnt == 0) {
 #ifdef CONFIG_NET_CLS_ACT
-		spinlock_t *root_lock = qdisc_root_lock(sch);
+		spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
 		struct cbq_sched_data *q = qdisc_priv(sch);
 
 		spin_lock_bh(root_lock);
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 97d4761cc31..d14f02056ae 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -1043,7 +1043,7 @@ static int htb_init(struct Qdisc *sch, struct nlattr *opt)
 
 static int htb_dump(struct Qdisc *sch, struct sk_buff *skb)
 {
-	spinlock_t *root_lock = qdisc_root_lock(sch);
+	spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
 	struct htb_sched *q = qdisc_priv(sch);
 	struct nlattr *nest;
 	struct tc_htb_glob gopt;
@@ -1075,7 +1075,7 @@ static int htb_dump_class(struct Qdisc *sch, unsigned long arg,
 			  struct sk_buff *skb, struct tcmsg *tcm)
 {
 	struct htb_class *cl = (struct htb_class *)arg;
-	spinlock_t *root_lock = qdisc_root_lock(sch);
+	spinlock_t *root_lock = qdisc_root_sleeping_lock(sch);
 	struct nlattr *nest;
 	struct tc_htb_opt opt;
 
diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c
index fb0294d0b55..3781e55046d 100644
--- a/net/sched/sch_netem.c
+++ b/net/sched/sch_netem.c
@@ -341,7 +341,7 @@ static int get_dist_table(struct Qdisc *sch, const struct nlattr *attr)
 	for (i = 0; i < n; i++)
 		d->table[i] = data[i];
 
-	root_lock = qdisc_root_lock(sch);
+	root_lock = qdisc_root_sleeping_lock(sch);
 
 	spin_lock_bh(root_lock);
 	d = xchg(&q->delay_dist, d);
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index 2c35c678563..d35ef059abb 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -161,7 +161,7 @@ teql_destroy(struct Qdisc* sch)
 						txq = netdev_get_tx_queue(master->dev, 0);
 						master->slaves = NULL;
 
-						root_lock = qdisc_root_lock(txq->qdisc);
+						root_lock = qdisc_root_sleeping_lock(txq->qdisc);
 						spin_lock_bh(root_lock);
 						qdisc_reset(txq->qdisc);
 						spin_unlock_bh(root_lock);
-- 
GitLab


From 7c19a3d280297d43ef5ff7c6b205dc208a16d3d1 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 29 Aug 2008 14:37:23 -0700
Subject: [PATCH 564/869] net: Unbreak userspace usage of linux/mroute.h

Nothing in linux/pim.h should be exported to userspace.

This should fix the XORP build failure reported by
Jose Calhariz, the debain package maintainer.

Nothing originally in linux/mroute.h was exported to userspace
ever, but some of this stuff started to be when it was moved into
this new linux/pim.h, and that was wrong.  If we didn't provide these
definitions for 10 years we can reasonably expect that applications
defined this stuff locally or used GLIBC headers providing the
protocol definitions.  And as such the only result of this can
be conflict and userland build breakage.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/linux/Kbuild    |  1 -
 include/linux/mroute.h  |  2 +-
 include/linux/mroute6.h |  1 +
 include/linux/pim.h     | 18 ------------------
 4 files changed, 2 insertions(+), 20 deletions(-)

diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 7d970678f94..59391250d51 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -297,7 +297,6 @@ unifdef-y += parport.h
 unifdef-y += patchkey.h
 unifdef-y += pci.h
 unifdef-y += personality.h
-unifdef-y += pim.h
 unifdef-y += pktcdvd.h
 unifdef-y += pmu.h
 unifdef-y += poll.h
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 07112ee9293..8a455694d68 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -6,7 +6,6 @@
 #ifdef __KERNEL__
 #include <linux/in.h>
 #endif
-#include <linux/pim.h>
 
 /*
  *	Based on the MROUTING 3.5 defines primarily to keep
@@ -130,6 +129,7 @@ struct igmpmsg
  */
 
 #ifdef __KERNEL__
+#include <linux/pim.h>
 #include <net/sock.h>
 
 #ifdef CONFIG_IP_MROUTE
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index 5cf50473a10..6f4c180179e 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -115,6 +115,7 @@ struct sioc_mif_req6
 
 #ifdef __KERNEL__
 
+#include <linux/pim.h>
 #include <linux/skbuff.h>	/* for struct sk_buff_head */
 
 #ifdef CONFIG_IPV6_MROUTE
diff --git a/include/linux/pim.h b/include/linux/pim.h
index 236ffd31739..1ba0661561a 100644
--- a/include/linux/pim.h
+++ b/include/linux/pim.h
@@ -3,22 +3,6 @@
 
 #include <asm/byteorder.h>
 
-#ifndef __KERNEL__
-struct pim {
-#if defined(__LITTLE_ENDIAN_BITFIELD)
-	__u8	pim_type:4,		/* PIM message type */
-		pim_ver:4;		/* PIM version */
-#elif defined(__BIG_ENDIAN_BITFIELD)
-	__u8	pim_ver:4;		/* PIM version */
-		pim_type:4;		/* PIM message type */
-#endif
-	__u8	pim_rsv;		/* Reserved */
-	__be16	pim_cksum;		/* Checksum */
-};
-
-#define PIM_MINLEN		8
-#endif
-
 /* Message types - V1 */
 #define PIM_V1_VERSION		__constant_htonl(0x10000000)
 #define PIM_V1_REGISTER		1
@@ -27,7 +11,6 @@ struct pim {
 #define PIM_VERSION		2
 #define PIM_REGISTER		1
 
-#if defined(__KERNEL__)
 #define PIM_NULL_REGISTER	__constant_htonl(0x40000000)
 
 /* PIMv2 register message header layout (ietf-draft-idmr-pimvsm-v2-00.ps */
@@ -42,4 +25,3 @@ struct pimreghdr
 struct sk_buff;
 extern int pim_rcv_v1(struct sk_buff *);
 #endif
-#endif
-- 
GitLab


From b4609472116bb806a95e98d04767189406c74c70 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 29 Aug 2008 14:38:03 -0700
Subject: [PATCH 565/869] Revert "x86: fix HPET regression in 2.6.26 versus
 2.6.25, check hpet against BAR, v3"

This reverts commit a2bd7274b47124d2fc4dfdb8c0591f545ba749dd.

It wasn't really right to begin with (there's a better fix for the
problem with e820 reservations clashing with PCI BAR's pending), but it
also actually causes more regressions, so it should be reverted even
before the better fix is finalized.

Rafael reports that this commit broke AHCI detection, and thus causes
the kernel to not boot on his quad core test box.

Reported-and-bisected-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: David Witbrodt <dawitbro@sbcglobal.net>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/pci/i386.c | 78 ---------------------------------------------
 1 file changed, 78 deletions(-)

diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index d765da91384..5807d1bc73f 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -31,11 +31,8 @@
 #include <linux/ioport.h>
 #include <linux/errno.h>
 #include <linux/bootmem.h>
-#include <linux/acpi.h>
 
 #include <asm/pat.h>
-#include <asm/hpet.h>
-#include <asm/io_apic.h>
 
 #include "pci.h"
 
@@ -80,77 +77,6 @@ pcibios_align_resource(void *data, struct resource *res,
 }
 EXPORT_SYMBOL(pcibios_align_resource);
 
-static int check_res_with_valid(struct pci_dev *dev, struct resource *res)
-{
-	unsigned long base;
-	unsigned long size;
-	int i;
-
-	base = res->start;
-	size = (res->start == 0 && res->end == res->start) ? 0 :
-		 (res->end - res->start + 1);
-
-	if (!base || !size)
-		return 0;
-
-#ifdef CONFIG_HPET_TIMER
-	/* for hpet */
-	if (base == hpet_address && (res->flags & IORESOURCE_MEM)) {
-		dev_info(&dev->dev, "BAR has HPET at %08lx-%08lx\n",
-				 base, base + size - 1);
-		return 1;
-	}
-#endif
-
-#ifdef CONFIG_X86_IO_APIC
-	for (i = 0; i < nr_ioapics; i++) {
-		unsigned long ioapic_phys = mp_ioapics[i].mp_apicaddr;
-
-		if (base == ioapic_phys && (res->flags & IORESOURCE_MEM)) {
-			dev_info(&dev->dev, "BAR has ioapic at %08lx-%08lx\n",
-					 base, base + size - 1);
-			return 1;
-		}
-	}
-#endif
-
-#ifdef CONFIG_PCI_MMCONFIG
-	for (i = 0; i < pci_mmcfg_config_num; i++) {
-		unsigned long addr;
-
-		addr = pci_mmcfg_config[i].address;
-		if (base == addr && (res->flags & IORESOURCE_MEM)) {
-			dev_info(&dev->dev, "BAR has MMCONFIG at %08lx-%08lx\n",
-					 base, base + size - 1);
-			return 1;
-		}
-	}
-#endif
-
-	return 0;
-}
-
-static int check_platform(struct pci_dev *dev, struct resource *res)
-{
-	struct resource *root = NULL;
-
-	/*
-	 * forcibly insert it into the
-	 * resource tree
-	 */
-	if (res->flags & IORESOURCE_MEM)
-		root = &iomem_resource;
-	else if (res->flags & IORESOURCE_IO)
-		root = &ioport_resource;
-
-	if (root && check_res_with_valid(dev, res)) {
-		insert_resource(root, res);
-
-		return 1;
-	}
-
-	return 0;
-}
 /*
  *  Handle resources of PCI devices.  If the world were perfect, we could
  *  just allocate all the resource regions and do nothing more.  It isn't.
@@ -202,8 +128,6 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				pr = pci_find_parent_resource(dev, r);
 				if (!r->start || !pr ||
 				    request_resource(pr, r) < 0) {
-					if (check_platform(dev, r))
-						continue;
 					dev_err(&dev->dev, "BAR %d: can't "
 						"allocate resource\n", idx);
 					/*
@@ -247,8 +171,6 @@ static void __init pcibios_allocate_resources(int pass)
 					r->flags, disabled, pass);
 				pr = pci_find_parent_resource(dev, r);
 				if (!pr || request_resource(pr, r) < 0) {
-					if (check_platform(dev, r))
-						continue;
 					dev_err(&dev->dev, "BAR %d: can't "
 						"allocate resource\n", idx);
 					/* We'll assign a new address later */
-- 
GitLab


From 316d9679f33caf7e683471647d1472bfe133d858 Mon Sep 17 00:00:00 2001
From: Andi Kleen <andi@firstfloor.org>
Date: Fri, 29 Aug 2008 20:06:23 +0200
Subject: [PATCH 566/869] Don't trigger softlockup detector on network fs
 blocked tasks

Pulling the ethernet cable on a 2.6.27-rc system with NFS mounts
currently leads to an ongoing flood of soft lockup detector backtraces
for all tasks blocked on the NFS mounts when the hickup takes
longer than 120s.

I don't think NFS problems should be all that noisy.

Luckily there's a reasonably easy way to distingush this case.

Don't report task softlockup warnings for tasks in TASK_KILLABLE
state, which is used by the network file systems.

I believe this patch is a 2.6.27 candidate.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/softlockup.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index b75b492fbfc..1a07f8ca4b9 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -180,6 +180,10 @@ static void check_hung_task(struct task_struct *t, unsigned long now)
 	if (t->flags & PF_FROZEN)
 		return;
 
+	/* Don't check for tasks waiting on network file systems like NFS */
+	if (t->state & TASK_KILLABLE)
+		return;
+
 	if (switch_count != t->last_switch_count || !t->last_switch_timestamp) {
 		t->last_switch_count = switch_count;
 		t->last_switch_timestamp = now;
-- 
GitLab


From bef69ea0dcce574a425feb0a5aa4c63dd108b9a6 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 29 Aug 2008 20:18:31 -0700
Subject: [PATCH 567/869] Resource handling: add
 'insert_resource_expand_to_fit()' function

Not used anywhere yet, but this complements the existing plain
'insert_resource()' functionality with a version that can expand the
resource we are adding in order to fix up any conflicts it has with
existing resources.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/ioport.h |  1 +
 kernel/resource.c      | 88 ++++++++++++++++++++++++++++++------------
 2 files changed, 64 insertions(+), 25 deletions(-)

diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 22d2115458c..8d3b7a9afd1 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -109,6 +109,7 @@ extern struct resource iomem_resource;
 extern int request_resource(struct resource *root, struct resource *new);
 extern int release_resource(struct resource *new);
 extern int insert_resource(struct resource *parent, struct resource *new);
+extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
 extern int allocate_resource(struct resource *root, struct resource *new,
 			     resource_size_t size, resource_size_t min,
 			     resource_size_t max, resource_size_t align,
diff --git a/kernel/resource.c b/kernel/resource.c
index f5b518eabef..cf0a178c751 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -362,35 +362,21 @@ int allocate_resource(struct resource *root, struct resource *new,
 
 EXPORT_SYMBOL(allocate_resource);
 
-/**
- * insert_resource - Inserts a resource in the resource tree
- * @parent: parent of the new resource
- * @new: new resource to insert
- *
- * Returns 0 on success, -EBUSY if the resource can't be inserted.
- *
- * This function is equivalent to request_resource when no conflict
- * happens. If a conflict happens, and the conflicting resources
- * entirely fit within the range of the new resource, then the new
- * resource is inserted and the conflicting resources become children of
- * the new resource.
+/*
+ * Insert a resource into the resource tree. If successful, return NULL,
+ * otherwise return the conflicting resource (compare to __request_resource())
  */
-int insert_resource(struct resource *parent, struct resource *new)
+static struct resource * __insert_resource(struct resource *parent, struct resource *new)
 {
-	int result;
 	struct resource *first, *next;
 
-	write_lock(&resource_lock);
-
 	for (;; parent = first) {
-	 	result = 0;
 		first = __request_resource(parent, new);
 		if (!first)
-			goto out;
+			return first;
 
-		result = -EBUSY;
 		if (first == parent)
-			goto out;
+			return first;
 
 		if ((first->start > new->start) || (first->end < new->end))
 			break;
@@ -401,15 +387,13 @@ int insert_resource(struct resource *parent, struct resource *new)
 	for (next = first; ; next = next->sibling) {
 		/* Partial overlap? Bad, and unfixable */
 		if (next->start < new->start || next->end > new->end)
-			goto out;
+			return next;
 		if (!next->sibling)
 			break;
 		if (next->sibling->start > new->end)
 			break;
 	}
 
-	result = 0;
-
 	new->parent = parent;
 	new->sibling = next->sibling;
 	new->child = first;
@@ -426,10 +410,64 @@ int insert_resource(struct resource *parent, struct resource *new)
 			next = next->sibling;
 		next->sibling = new;
 	}
+	return NULL;
+}
 
- out:
+/**
+ * insert_resource - Inserts a resource in the resource tree
+ * @parent: parent of the new resource
+ * @new: new resource to insert
+ *
+ * Returns 0 on success, -EBUSY if the resource can't be inserted.
+ *
+ * This function is equivalent to request_resource when no conflict
+ * happens. If a conflict happens, and the conflicting resources
+ * entirely fit within the range of the new resource, then the new
+ * resource is inserted and the conflicting resources become children of
+ * the new resource.
+ */
+int insert_resource(struct resource *parent, struct resource *new)
+{
+	struct resource *conflict;
+
+	write_lock(&resource_lock);
+	conflict = __insert_resource(parent, new);
+	write_unlock(&resource_lock);
+	return conflict ? -EBUSY : 0;
+}
+
+/**
+ * insert_resource_expand_to_fit - Insert a resource into the resource tree
+ * @parent: parent of the new resource
+ * @new: new resource to insert
+ *
+ * Insert a resource into the resource tree, possibly expanding it in order
+ * to make it encompass any conflicting resources.
+ */
+void insert_resource_expand_to_fit(struct resource *root, struct resource *new)
+{
+	if (new->parent)
+		return;
+
+	write_lock(&resource_lock);
+	for (;;) {
+		struct resource *conflict;
+
+		conflict = __insert_resource(root, new);
+		if (!conflict)
+			break;
+		if (conflict == root)
+			break;
+
+		/* Ok, expand resource to cover the conflict, then try again .. */
+		if (conflict->start < new->start)
+			new->start = conflict->start;
+		if (conflict->end > new->end)
+			new->end = conflict->end;
+
+		printk("Expanded resource %s due to conflict with %s\n", new->name, conflict->name);
+	}
 	write_unlock(&resource_lock);
-	return result;
 }
 
 /**
-- 
GitLab


From dbb8c35d9063fe233626865cc836fbc102fa083b Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Sat, 30 Aug 2008 02:04:45 -0700
Subject: [PATCH 568/869] sparc64: setup_valid_addr_bitmap_from_pavail() should
 be __init

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/mm/init.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index b4aeb0f696d..a41df7bef03 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -1843,7 +1843,7 @@ static int pavail_rescan_ents __initdata;
  * memory list again, and make sure it provides at least as much
  * memory as 'pavail' does.
  */
-static void setup_valid_addr_bitmap_from_pavail(void)
+static void __init setup_valid_addr_bitmap_from_pavail(void)
 {
 	int i;
 
-- 
GitLab


From 8191e1fa8131a422f4bf7b0f2dc1f8543fd17783 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Fri, 22 Aug 2008 12:26:40 +0300
Subject: [PATCH 569/869] UBIFS: do not update min_idx_lebs in stafs

This is bad because the rest of the code should not depend on it,
and this may hide bugss, instead of revealing them.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/budget.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 15409815747..ac0d2e1e73b 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -741,7 +741,6 @@ long long ubifs_budg_get_free_space(struct ubifs_info *c)
 
 	available = ubifs_calc_available(c, min_idx_lebs);
 	outstanding = c->budg_data_growth + c->budg_dd_growth;
-	c->min_idx_lebs = min_idx_lebs;
 	spin_unlock(&c->space_lock);
 
 	if (available > outstanding)
-- 
GitLab


From 9e5de3549615818cae9c20a0ee1fd3ad4a747758 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 25 Aug 2008 17:29:43 +0300
Subject: [PATCH 570/869] UBIFS: push empty flash hack down

We have a hack which forces the amount of flash space to be
equivalent to 'c->blocks_cnt' in case of empty FS. This is
to make users happy and see '%0' used in 'df' when they
mount an empty FS. This hack is not needed in
'ubifs_calc_available()', but it is only needed the caller,
in 'ubifs_budg_get_free_space()'. So push it down there.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/budget.c | 24 +++++++++++-------------
 fs/ubifs/super.c  |  2 --
 2 files changed, 11 insertions(+), 15 deletions(-)

diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index ac0d2e1e73b..f6d2eaa7a06 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -302,18 +302,6 @@ long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs)
 	int subtract_lebs;
 	long long available;
 
-	/*
-	 * Force the amount available to the total size reported if the used
-	 * space is zero.
-	 */
-	if (c->lst.total_used <= UBIFS_INO_NODE_SZ &&
-	    c->budg_data_growth + c->budg_dd_growth == 0) {
-		/* Do the same calculation as for c->block_cnt */
-		available = c->main_lebs - 2;
-		available *= c->leb_size - c->dark_wm;
-		return available;
-	}
-
 	available = c->main_bytes - c->lst.total_used;
 
 	/*
@@ -739,8 +727,18 @@ long long ubifs_budg_get_free_space(struct ubifs_info *c)
 		return 0;
 	}
 
-	available = ubifs_calc_available(c, min_idx_lebs);
 	outstanding = c->budg_data_growth + c->budg_dd_growth;
+
+	/*
+	 * Force the amount available to the total size reported if the used
+	 * space is zero.
+	 */
+	if (c->lst.total_used <= UBIFS_INO_NODE_SZ && !outstanding) {
+		spin_unlock(&c->space_lock);
+		return (long long)c->block_cnt << UBIFS_BLOCK_SHIFT;
+	}
+
+	available = ubifs_calc_available(c, min_idx_lebs);
 	spin_unlock(&c->space_lock);
 
 	if (available > outstanding)
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index f71e6b8822c..1018053519e 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -649,8 +649,6 @@ static int init_constants_late(struct ubifs_info *c)
 	 *
 	 * Subtract the LEB reserved for GC and the LEB which is reserved for
 	 * deletions.
-	 *
-	 * Review 'ubifs_calc_available()' if changing this calculation.
 	 */
 	tmp64 = c->main_lebs - 2;
 	tmp64 *= (uint64_t)c->leb_size - c->dark_wm;
-- 
GitLab


From 8aabb75017291ba68c09ff5fdb998ef0a1fdaaf9 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 25 Aug 2008 16:02:31 +0300
Subject: [PATCH 571/869] UBIFS: remove incorrect index space check

When we report free space to user-space, we should not report
0 if the amount of empty LEBs is too low, because they would
be produced by GC when needed. Thus, just call
'ubifs_calc_available()' straight away which would take
'min_idx_lebs' into account anyway.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/budget.c | 15 +--------------
 1 file changed, 1 insertion(+), 14 deletions(-)

diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index f6d2eaa7a06..9ef630a594c 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -709,24 +709,11 @@ void ubifs_release_dirty_inode_budget(struct ubifs_info *c,
  */
 long long ubifs_budg_get_free_space(struct ubifs_info *c)
 {
-	int min_idx_lebs, rsvd_idx_lebs;
+	int min_idx_lebs;
 	long long available, outstanding, free;
 
-	/* Do exactly the same calculations as in 'do_budget_space()' */
 	spin_lock(&c->space_lock);
 	min_idx_lebs = ubifs_calc_min_idx_lebs(c);
-
-	if (min_idx_lebs > c->lst.idx_lebs)
-		rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
-	else
-		rsvd_idx_lebs = 0;
-
-	if (rsvd_idx_lebs > c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt
-				- c->lst.taken_empty_lebs) {
-		spin_unlock(&c->space_lock);
-		return 0;
-	}
-
 	outstanding = c->budg_data_growth + c->budg_dd_growth;
 
 	/*
-- 
GitLab


From 4b5f2762ec914c9dfd0e9d2377c0574f2ee9a8f9 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 25 Aug 2008 16:15:56 +0300
Subject: [PATCH 572/869] UBIFS: improve statfs reporting

Make free space calculation less pessimistic and more realistic,
which in turn improves 'statfs()' reports. Now it lies by 10%-20%,
instead of 20%-30% (10% more honest).

Results of "freespace" test (120MiB volume, 16KiB LEB size,
512 bytes page size). Before the change:

freespace: Test 1: fill the space we have 3 times
freespace: was free: 78274560 bytes 74.6 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 18214912 bytes 17.4 MiB, wrote 23.3% more than predicted
freespace: was free: 76754944 bytes 73.2 MiB, wrote: 96493568 bytes 92.0 MiB, delta: 19738624 bytes 18.8 MiB, wrote 25.7% more than predicted
freespace: was free: 76759040 bytes 73.2 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 19730432 bytes 18.8 MiB, wrote 25.7% more than predicted
freespace: Test 1 finished

freespace: Test 2: gradually lessen amount of free space and fill the FS
freespace: do 10 steps, lessen free space by 6977722 bytes 6.7 MiB each time
freespace: was free: 72273920 bytes 68.9 MiB, wrote: 88891392 bytes 84.8 MiB, delta: 16617472 bytes 15.8 MiB, wrote 23.0% more than predicted
freespace: was free: 66154496 bytes 63.1 MiB, wrote: 81506304 bytes 77.7 MiB, delta: 15351808 bytes 14.6 MiB, wrote 23.2% more than predicted
freespace: was free: 58732544 bytes 56.0 MiB, wrote: 72572928 bytes 69.2 MiB, delta: 13840384 bytes 13.2 MiB, wrote 23.6% more than predicted
freespace: was free: 51552256 bytes 49.2 MiB, wrote: 63754240 bytes 60.8 MiB, delta: 12201984 bytes 11.6 MiB, wrote 23.7% more than predicted
freespace: was free: 44404736 bytes 42.3 MiB, wrote: 54943744 bytes 52.4 MiB, delta: 10539008 bytes 10.1 MiB, wrote 23.7% more than predicted
freespace: was free: 37285888 bytes 35.6 MiB, wrote: 46161920 bytes 44.0 MiB, delta: 8876032 bytes 8.5 MiB, wrote 23.8% more than predicted
freespace: was free: 30171136 bytes 28.8 MiB, wrote: 37384192 bytes 35.7 MiB, delta: 7213056 bytes 6.9 MiB, wrote 23.9% more than predicted
freespace: was free: 23048192 bytes 22.0 MiB, wrote: 28606464 bytes 27.3 MiB, delta: 5558272 bytes 5.3 MiB, wrote 24.1% more than predicted
freespace: was free: 15941632 bytes 15.2 MiB, wrote: 19828736 bytes 18.9 MiB, delta: 3887104 bytes 3.7 MiB, wrote 24.4% more than predicted
freespace: was free: 8830976 bytes 8.4 MiB, wrote: 11063296 bytes 10.6 MiB, delta: 2232320 bytes 2.1 MiB, wrote 25.3% more than predicted
freespace: Test 2 finished

freespace: Test 3: gradually lessen amount of free space by trashing and fill the FS
freespace: do 10 steps, lessen free space by 6985541 bytes 6.7 MiB each time
freespace: trashing: was free: 76840960 bytes 73.3 MiB, need free: 6985550 bytes 6.7 MiB, files created: 248311, delete 225737 (90.9% of them)
freespace: was free: 65228800 bytes 62.2 MiB, wrote: 82530304 bytes 78.7 MiB, delta: 17301504 bytes 16.5 MiB, wrote 26.5% more than predicted
freespace: trashing: was free: 74485760 bytes 71.0 MiB, need free: 13971091 bytes 13.3 MiB, files created: 248712, delete 202061 (81.2% of them)
freespace: was free: 55025664 bytes 52.5 MiB, wrote: 71925760 bytes 68.6 MiB, delta: 16900096 bytes 16.1 MiB, wrote 30.7% more than predicted
freespace: trashing: was free: 75550720 bytes 72.1 MiB, need free: 20956632 bytes 20.0 MiB, files created: 248849, delete 179822 (72.3% of them)
freespace: was free: 46669824 bytes 44.5 MiB, wrote: 63197184 bytes 60.3 MiB, delta: 16527360 bytes 15.8 MiB, wrote 35.4% more than predicted
freespace: trashing: was free: 76214272 bytes 72.7 MiB, need free: 27942173 bytes 26.6 MiB, files created: 248789, delete 157576 (63.3% of them)
freespace: was free: 39129088 bytes 37.3 MiB, wrote: 55164928 bytes 52.6 MiB, delta: 16035840 bytes 15.3 MiB, wrote 41.0% more than predicted
freespace: trashing: was free: 77398016 bytes 73.8 MiB, need free: 34927714 bytes 33.3 MiB, files created: 248711, delete 136474 (54.9% of them)
freespace: was free: 32325632 bytes 30.8 MiB, wrote: 48234496 bytes 46.0 MiB, delta: 15908864 bytes 15.2 MiB, wrote 49.2% more than predicted
freespace: trashing: was free: 75796480 bytes 72.3 MiB, need free: 41913255 bytes 40.0 MiB, files created: 248674, delete 111164 (44.7% of them)
freespace: was free: 25079808 bytes 23.9 MiB, wrote: 40775680 bytes 38.9 MiB, delta: 15695872 bytes 15.0 MiB, wrote 62.6% more than predicted
freespace: trashing: was free: 78209024 bytes 74.6 MiB, need free: 48898796 bytes 46.6 MiB, files created: 248708, delete 93207 (37.5% of them)
freespace: was free: 20582400 bytes 19.6 MiB, wrote: 34844672 bytes 33.2 MiB, delta: 14262272 bytes 13.6 MiB, wrote 69.3% more than predicted
freespace: trashing: was free: 77328384 bytes 73.7 MiB, need free: 55884337 bytes 53.3 MiB, files created: 248644, delete 68951 (27.7% of them)
freespace: was free: 14368768 bytes 13.7 MiB, wrote: 28278784 bytes 27.0 MiB, delta: 13910016 bytes 13.3 MiB, wrote 96.8% more than predicted
freespace: trashing: was free: 77434880 bytes 73.8 MiB, need free: 62869878 bytes 60.0 MiB, files created: 248640, delete 46767 (18.8% of them)
freespace: was free: 8286208 bytes 7.9 MiB, wrote: 21811200 bytes 20.8 MiB, delta: 13524992 bytes 12.9 MiB, wrote 163.2% more than predicted
freespace: trashing: was free: 77856768 bytes 74.2 MiB, need free: 69855419 bytes 66.6 MiB, files created: 248576, delete 25546 (10.3% of them)
freespace: was free: 5570560 bytes 5.3 MiB, wrote: 8187904 bytes 7.8 MiB, delta: 2617344 bytes 2.5 MiB, wrote 47.0% more than predicted
freespace: Test 3 finished

freespace: finished successfully

After the change:

freespace: Test 1: fill the space we have 3 times
freespace: was free: 85204992 bytes 81.3 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 11284480 bytes 10.8 MiB, wrote 13.2% more than predicted
freespace: was free: 83554304 bytes 79.7 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 12935168 bytes 12.3 MiB, wrote 15.5% more than predicted
freespace: was free: 83554304 bytes 79.7 MiB, wrote: 96493568 bytes 92.0 MiB, delta: 12939264 bytes 12.3 MiB, wrote 15.5% more than predicted
freespace: Test 1 finished

freespace: Test 2: gradually lessen amount of free space and fill the FS
freespace: do 10 steps, lessen free space by 7596218 bytes 7.2 MiB each time
freespace: was free: 78675968 bytes 75.0 MiB, wrote: 88903680 bytes 84.8 MiB, delta: 10227712 bytes 9.8 MiB, wrote 13.0% more than predicted
freespace: was free: 72015872 bytes 68.7 MiB, wrote: 81514496 bytes 77.7 MiB, delta: 9498624 bytes 9.1 MiB, wrote 13.2% more than predicted
freespace: was free: 63938560 bytes 61.0 MiB, wrote: 72589312 bytes 69.2 MiB, delta: 8650752 bytes 8.2 MiB, wrote 13.5% more than predicted
freespace: was free: 56127488 bytes 53.5 MiB, wrote: 63762432 bytes 60.8 MiB, delta: 7634944 bytes 7.3 MiB, wrote 13.6% more than predicted
freespace: was free: 48336896 bytes 46.1 MiB, wrote: 54935552 bytes 52.4 MiB, delta: 6598656 bytes 6.3 MiB, wrote 13.7% more than predicted
freespace: was free: 40587264 bytes 38.7 MiB, wrote: 46157824 bytes 44.0 MiB, delta: 5570560 bytes 5.3 MiB, wrote 13.7% more than predicted
freespace: was free: 32841728 bytes 31.3 MiB, wrote: 37384192 bytes 35.7 MiB, delta: 4542464 bytes 4.3 MiB, wrote 13.8% more than predicted
freespace: was free: 25100288 bytes 23.9 MiB, wrote: 28618752 bytes 27.3 MiB, delta: 3518464 bytes 3.4 MiB, wrote 14.0% more than predicted
freespace: was free: 17342464 bytes 16.5 MiB, wrote: 19841024 bytes 18.9 MiB, delta: 2498560 bytes 2.4 MiB, wrote 14.4% more than predicted
freespace: was free: 9605120 bytes 9.2 MiB, wrote: 11063296 bytes 10.6 MiB, delta: 1458176 bytes 1.4 MiB, wrote 15.2% more than predicted
freespace: Test 2 finished

freespace: Test 3: gradually lessen amount of free space by trashing and fill the FS
freespace: do 10 steps, lessen free space by 7606272 bytes 7.3 MiB each time
freespace: trashing: was free: 83668992 bytes 79.8 MiB, need free: 7606272 bytes 7.3 MiB, files created: 248297, delete 225724 (90.9% of them)
freespace: was free: 70803456 bytes 67.5 MiB, wrote: 82485248 bytes 78.7 MiB, delta: 11681792 bytes 11.1 MiB, wrote 16.5% more than predicted
freespace: trashing: was free: 81080320 bytes 77.3 MiB, need free: 15212544 bytes 14.5 MiB, files created: 248711, delete 202047 (81.2% of them)
freespace: was free: 59867136 bytes 57.1 MiB, wrote: 71897088 bytes 68.6 MiB, delta: 12029952 bytes 11.5 MiB, wrote 20.1% more than predicted
freespace: trashing: was free: 82243584 bytes 78.4 MiB, need free: 22818816 bytes 21.8 MiB, files created: 248866, delete 179817 (72.3% of them)
freespace: was free: 50905088 bytes 48.5 MiB, wrote: 63168512 bytes 60.2 MiB, delta: 12263424 bytes 11.7 MiB, wrote 24.1% more than predicted
freespace: trashing: was free: 83402752 bytes 79.5 MiB, need free: 30425088 bytes 29.0 MiB, files created: 248920, delete 158114 (63.5% of them)
freespace: was free: 42651648 bytes 40.7 MiB, wrote: 55406592 bytes 52.8 MiB, delta: 12754944 bytes 12.2 MiB, wrote 29.9% more than predicted
freespace: trashing: was free: 84402176 bytes 80.5 MiB, need free: 38031360 bytes 36.3 MiB, files created: 248709, delete 136641 (54.9% of them)
freespace: was free: 35233792 bytes 33.6 MiB, wrote: 48250880 bytes 46.0 MiB, delta: 13017088 bytes 12.4 MiB, wrote 36.9% more than predicted
freespace: trashing: was free: 82530304 bytes 78.7 MiB, need free: 45637632 bytes 43.5 MiB, files created: 248778, delete 111208 (44.7% of them)
freespace: was free: 27287552 bytes 26.0 MiB, wrote: 40267776 bytes 38.4 MiB, delta: 12980224 bytes 12.4 MiB, wrote 47.6% more than predicted
freespace: trashing: was free: 85114880 bytes 81.2 MiB, need free: 53243904 bytes 50.8 MiB, files created: 248508, delete 93052 (37.4% of them)
freespace: was free: 22437888 bytes 21.4 MiB, wrote: 35328000 bytes 33.7 MiB, delta: 12890112 bytes 12.3 MiB, wrote 57.4% more than predicted
freespace: trashing: was free: 84103168 bytes 80.2 MiB, need free: 60850176 bytes 58.0 MiB, files created: 248637, delete 68743 (27.6% of them)
freespace: was free: 15536128 bytes 14.8 MiB, wrote: 28319744 bytes 27.0 MiB, delta: 12783616 bytes 12.2 MiB, wrote 82.3% more than predicted
freespace: trashing: was free: 84357120 bytes 80.4 MiB, need free: 68456448 bytes 65.3 MiB, files created: 248567, delete 46852 (18.8% of them)
freespace: was free: 9015296 bytes 8.6 MiB, wrote: 22044672 bytes 21.0 MiB, delta: 13029376 bytes 12.4 MiB, wrote 144.5% more than predicted
freespace: trashing: was free: 84942848 bytes 81.0 MiB, need free: 76062720 bytes 72.5 MiB, files created: 248636, delete 25993 (10.5% of them)
freespace: was free: 6086656 bytes 5.8 MiB, wrote: 8331264 bytes 7.9 MiB, delta: 2244608 bytes 2.1 MiB, wrote 36.9% more than predicted
freespace: Test 3 finished

freespace: finished successfully

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/budget.c | 45 +++++++++++++++++++++++++++++++++++++++++++++
 fs/ubifs/misc.h   | 32 --------------------------------
 fs/ubifs/ubifs.h  |  1 +
 3 files changed, 46 insertions(+), 32 deletions(-)

diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 9ef630a594c..7851480a6ce 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -701,6 +701,51 @@ void ubifs_release_dirty_inode_budget(struct ubifs_info *c,
 	ubifs_release_budget(c, &req);
 }
 
+/**
+ * ubifs_reported_space - calculate reported free space.
+ * @c: the UBIFS file-system description object
+ * @free: amount of free space
+ *
+ * This function calculates amount of free space which will be reported to
+ * user-space. User-space application tend to expect that if the file-system
+ * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
+ * are able to write a file of size N. UBIFS attaches node headers to each data
+ * node and it has to write indexind nodes as well. This introduces additional
+ * overhead, and UBIFS it has to report sligtly less free space to meet the
+ * above expectetion.
+ *
+ * This function assumes free space is made up of uncompressed data nodes and
+ * full index nodes (one per data node, tripled because we always allow enough
+ * space to write the index thrice).
+ *
+ * Note, the calculation is pessimistic, which means that most of the time
+ * UBIFS reports less space than it actually has.
+ */
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free)
+{
+	int divisor, factor;
+
+	/*
+	 * Reported space size is @free * X, where X is UBIFS block size
+	 * divided by UBIFS block size + all overhead one data block
+	 * introduces. The overhead is the node header + indexing overhead.
+	 *
+	 * Indexing overhead is calculations are based on the following
+	 * formula: I = N/(f - 1) + 1, where I - number of indexing nodes, N -
+	 * number of data nodes, f - fanout. Because effective UBIFS fanout is
+	 * twice as less than maximum fanout, we assume that each data node
+	 * introduces 3 * @c->max_idx_node_sz / (@c->fanout/2 - 1) bytes.
+	 * Note, the multiplier 3 is because UBIFS reseves thrice as more space
+	 * for the index.
+	 */
+	factor = UBIFS_BLOCK_SIZE;
+	divisor = UBIFS_MAX_DATA_NODE_SZ;
+	divisor += (c->max_idx_node_sz * 3) / ((c->fanout >> 1) - 1);
+	free *= factor;
+	do_div(free, divisor);
+	return free;
+}
+
 /**
  * ubifs_budg_get_free_space - return amount of free space.
  * @c: UBIFS file-system description object
diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h
index 87ced4c74a6..4c12a9215d7 100644
--- a/fs/ubifs/misc.h
+++ b/fs/ubifs/misc.h
@@ -283,38 +283,6 @@ static inline void *ubifs_idx_key(const struct ubifs_info *c,
 	return (void *)((struct ubifs_branch *)idx->branches)->key;
 }
 
-/**
- * ubifs_reported_space - calculate reported free space.
- * @c: the UBIFS file-system description object
- * @free: amount of free space
- *
- * This function calculates amount of free space which will be reported to
- * user-space. User-space application tend to expect that if the file-system
- * (e.g., via the 'statfs()' call) reports that it has N bytes available, they
- * are able to write a file of size N. UBIFS attaches node headers to each data
- * node and it has to write indexind nodes as well. This introduces additional
- * overhead, and UBIFS it has to report sligtly less free space to meet the
- * above expectetion.
- *
- * This function assumes free space is made up of uncompressed data nodes and
- * full index nodes (one per data node, doubled because we always allow enough
- * space to write the index twice).
- *
- * Note, the calculation is pessimistic, which means that most of the time
- * UBIFS reports less space than it actually has.
- */
-static inline long long ubifs_reported_space(const struct ubifs_info *c,
-					     uint64_t free)
-{
-	int divisor, factor;
-
-	divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz * 3);
-	factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ;
-	do_div(free, divisor);
-
-	return free * factor;
-}
-
 /**
  * ubifs_current_time - round current time to time granularity.
  * @inode: inode
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 7828d69ca4f..681d46e1628 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -1441,6 +1441,7 @@ void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode,
 long long ubifs_budg_get_free_space(struct ubifs_info *c);
 int ubifs_calc_min_idx_lebs(struct ubifs_info *c);
 void ubifs_convert_page_budget(struct ubifs_info *c);
+long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free);
 long long ubifs_calc_available(const struct ubifs_info *c, int min_idx_lebs);
 
 /* find.c */
-- 
GitLab


From ad507653a39e0d27404291e5d813683265388a20 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 25 Aug 2008 18:32:57 +0300
Subject: [PATCH 573/869] UBIFS: fix assertion

The assertion was incorrect, because it did not take into
account free space.

This patch also amends the comments correspondingly, and
cleans them up a little.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/find.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c
index adee7b5ddea..9fc55ae7b03 100644
--- a/fs/ubifs/find.c
+++ b/fs/ubifs/find.c
@@ -211,14 +211,8 @@ static const struct ubifs_lprops *scan_for_dirty(struct ubifs_info *c,
  * dirty index heap, and it falls-back to LPT scanning if the heaps are empty
  * or do not have an LEB which satisfies the @min_space criteria.
  *
- * Note:
- *   o LEBs which have less than dead watermark of dirty space are never picked
- *   by this function;
- *
- * Returns zero and the LEB properties of
- * found dirty LEB in case of success, %-ENOSPC if no dirty LEB was found and a
- * negative error code in case of other failures. The returned LEB is marked as
- * "taken".
+ * Note, LEBs which have less than dead watermark of free + dirty space are
+ * never picked by this function.
  *
  * The additional @pick_free argument controls if this function has to return a
  * free or freeable LEB if one is present. For example, GC must to set it to %1,
@@ -231,6 +225,10 @@ static const struct ubifs_lprops *scan_for_dirty(struct ubifs_info *c,
  *
  * In addition @pick_free is set to %2 by the recovery process in order to
  * recover gc_lnum in which case an index LEB must not be returned.
+ *
+ * This function returns zero and the LEB properties of found dirty LEB in case
+ * of success, %-ENOSPC if no dirty LEB was found and a negative error code in
+ * case of other failures. The returned LEB is marked as "taken".
  */
 int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
 			 int min_space, int pick_free)
@@ -317,7 +315,7 @@ int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
 		lp = idx_lp;
 
 	if (lp) {
-		ubifs_assert(lp->dirty >= c->dead_wm);
+		ubifs_assert(lp->free + lp->dirty >= c->dead_wm);
 		goto found;
 	}
 
-- 
GitLab


From 131130b9a1e6e523c64b34137b14f88ae1382a6a Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 25 Aug 2008 18:34:45 +0300
Subject: [PATCH 574/869] UBIFS: add forgotten gc_idx_lebs component

We add this component at other similar places, but not in this
one.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/find.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c
index 9fc55ae7b03..e045c8b5542 100644
--- a/fs/ubifs/find.c
+++ b/fs/ubifs/find.c
@@ -243,7 +243,7 @@ int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp,
 		int lebs, rsvd_idx_lebs = 0;
 
 		spin_lock(&c->space_lock);
-		lebs = c->lst.empty_lebs;
+		lebs = c->lst.empty_lebs + c->idx_gc_cnt;
 		lebs += c->freeable_cnt - c->lst.taken_empty_lebs;
 
 		/*
-- 
GitLab


From 9bbb5726efb64e2cfed42f6eec07db80cd87e63b Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Fri, 22 Aug 2008 18:23:22 +0300
Subject: [PATCH 575/869] UBIFS: introduce LEB overhead

This is a preparational patch for the following statfs()
report fix.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/super.c | 6 ++++++
 fs/ubifs/ubifs.h | 5 +++++
 2 files changed, 11 insertions(+)

diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 1018053519e..be23fd3cfd8 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -530,6 +530,12 @@ static int init_constants_early(struct ubifs_info *c)
 	c->dead_wm = ALIGN(MIN_WRITE_SZ, c->min_io_size);
 	c->dark_wm = ALIGN(UBIFS_MAX_NODE_SZ, c->min_io_size);
 
+	/*
+	 * Calculate how many bytes would be wasted at the end of LEB if it was
+	 * fully filled with data nodes of maximum size. This is used in
+	 * calculations when reporting free space.
+	 */
+	c->leb_overhead = c->leb_size % UBIFS_MAX_DATA_NODE_SZ;
 	return 0;
 }
 
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 681d46e1628..57e58541de2 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -995,6 +995,9 @@ struct ubifs_mount_opts {
  * @max_idx_node_sz: maximum indexing node aligned on 8-bytes boundary
  * @max_inode_sz: maximum possible inode size in bytes
  * @max_znode_sz: size of znode in bytes
+ *
+ * @leb_overhead: how many bytes are wasted in an LEB when it is filled with
+ *                data nodes of maximum size - used in free space reporting
  * @dead_wm: LEB dead space watermark
  * @dark_wm: LEB dark space watermark
  * @block_cnt: count of 4KiB blocks on the FS
@@ -1226,6 +1229,8 @@ struct ubifs_info {
 	int max_idx_node_sz;
 	long long max_inode_sz;
 	int max_znode_sz;
+
+	int leb_overhead;
 	int dead_wm;
 	int dark_wm;
 	int block_cnt;
-- 
GitLab


From 7dad181bbe58b8fe9e170da28bcd5f6ec9addd6d Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Mon, 25 Aug 2008 18:58:19 +0300
Subject: [PATCH 576/869] UBIFS: improve statfs reporting even more

Since free space we report in statfs is file size which should
fit to the FS - change the way we calculate free space and use
leb_overhead instead of dark_wm in calculations.

Results of "freespace" test (120MiB volume, 16KiB LEB size,
512 bytes page size). Before the change:

freespace: Test 1: fill the space we have 3 times
freespace: was free: 85204992 bytes 81.3 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 11284480 bytes 10.8 MiB, wrote 13.2% more than predicted
freespace: was free: 83554304 bytes 79.7 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 12935168 bytes 12.3 MiB, wrote 15.5% more than predicted
freespace: was free: 83554304 bytes 79.7 MiB, wrote: 96493568 bytes 92.0 MiB, delta: 12939264 bytes 12.3 MiB, wrote 15.5% more than predicted
freespace: Test 1 finished

freespace: Test 2: gradually lessen amount of free space and fill the FS
freespace: do 10 steps, lessen free space by 7596218 bytes 7.2 MiB each time
freespace: was free: 78675968 bytes 75.0 MiB, wrote: 88903680 bytes 84.8 MiB, delta: 10227712 bytes 9.8 MiB, wrote 13.0% more than predicted
freespace: was free: 72015872 bytes 68.7 MiB, wrote: 81514496 bytes 77.7 MiB, delta: 9498624 bytes 9.1 MiB, wrote 13.2% more than predicted
freespace: was free: 63938560 bytes 61.0 MiB, wrote: 72589312 bytes 69.2 MiB, delta: 8650752 bytes 8.2 MiB, wrote 13.5% more than predicted
freespace: was free: 56127488 bytes 53.5 MiB, wrote: 63762432 bytes 60.8 MiB, delta: 7634944 bytes 7.3 MiB, wrote 13.6% more than predicted
freespace: was free: 48336896 bytes 46.1 MiB, wrote: 54935552 bytes 52.4 MiB, delta: 6598656 bytes 6.3 MiB, wrote 13.7% more than predicted
freespace: was free: 40587264 bytes 38.7 MiB, wrote: 46157824 bytes 44.0 MiB, delta: 5570560 bytes 5.3 MiB, wrote 13.7% more than predicted
freespace: was free: 32841728 bytes 31.3 MiB, wrote: 37384192 bytes 35.7 MiB, delta: 4542464 bytes 4.3 MiB, wrote 13.8% more than predicted
freespace: was free: 25100288 bytes 23.9 MiB, wrote: 28618752 bytes 27.3 MiB, delta: 3518464 bytes 3.4 MiB, wrote 14.0% more than predicted
freespace: was free: 17342464 bytes 16.5 MiB, wrote: 19841024 bytes 18.9 MiB, delta: 2498560 bytes 2.4 MiB, wrote 14.4% more than predicted
freespace: was free: 9605120 bytes 9.2 MiB, wrote: 11063296 bytes 10.6 MiB, delta: 1458176 bytes 1.4 MiB, wrote 15.2% more than predicted
freespace: Test 2 finished

freespace: Test 3: gradually lessen amount of free space by trashing and fill the FS
freespace: do 10 steps, lessen free space by 7606272 bytes 7.3 MiB each time
freespace: trashing: was free: 83668992 bytes 79.8 MiB, need free: 7606272 bytes 7.3 MiB, files created: 248297, delete 225724 (90.9% of them)
freespace: was free: 70803456 bytes 67.5 MiB, wrote: 82485248 bytes 78.7 MiB, delta: 11681792 bytes 11.1 MiB, wrote 16.5% more than predicted
freespace: trashing: was free: 81080320 bytes 77.3 MiB, need free: 15212544 bytes 14.5 MiB, files created: 248711, delete 202047 (81.2% of them)
freespace: was free: 59867136 bytes 57.1 MiB, wrote: 71897088 bytes 68.6 MiB, delta: 12029952 bytes 11.5 MiB, wrote 20.1% more than predicted
freespace: trashing: was free: 82243584 bytes 78.4 MiB, need free: 22818816 bytes 21.8 MiB, files created: 248866, delete 179817 (72.3% of them)
freespace: was free: 50905088 bytes 48.5 MiB, wrote: 63168512 bytes 60.2 MiB, delta: 12263424 bytes 11.7 MiB, wrote 24.1% more than predicted
freespace: trashing: was free: 83402752 bytes 79.5 MiB, need free: 30425088 bytes 29.0 MiB, files created: 248920, delete 158114 (63.5% of them)
freespace: was free: 42651648 bytes 40.7 MiB, wrote: 55406592 bytes 52.8 MiB, delta: 12754944 bytes 12.2 MiB, wrote 29.9% more than predicted
freespace: trashing: was free: 84402176 bytes 80.5 MiB, need free: 38031360 bytes 36.3 MiB, files created: 248709, delete 136641 (54.9% of them)
freespace: was free: 35233792 bytes 33.6 MiB, wrote: 48250880 bytes 46.0 MiB, delta: 13017088 bytes 12.4 MiB, wrote 36.9% more than predicted
freespace: trashing: was free: 82530304 bytes 78.7 MiB, need free: 45637632 bytes 43.5 MiB, files created: 248778, delete 111208 (44.7% of them)
freespace: was free: 27287552 bytes 26.0 MiB, wrote: 40267776 bytes 38.4 MiB, delta: 12980224 bytes 12.4 MiB, wrote 47.6% more than predicted
freespace: trashing: was free: 85114880 bytes 81.2 MiB, need free: 53243904 bytes 50.8 MiB, files created: 248508, delete 93052 (37.4% of them)
freespace: was free: 22437888 bytes 21.4 MiB, wrote: 35328000 bytes 33.7 MiB, delta: 12890112 bytes 12.3 MiB, wrote 57.4% more than predicted
freespace: trashing: was free: 84103168 bytes 80.2 MiB, need free: 60850176 bytes 58.0 MiB, files created: 248637, delete 68743 (27.6% of them)
freespace: was free: 15536128 bytes 14.8 MiB, wrote: 28319744 bytes 27.0 MiB, delta: 12783616 bytes 12.2 MiB, wrote 82.3% more than predicted
freespace: trashing: was free: 84357120 bytes 80.4 MiB, need free: 68456448 bytes 65.3 MiB, files created: 248567, delete 46852 (18.8% of them)
freespace: was free: 9015296 bytes 8.6 MiB, wrote: 22044672 bytes 21.0 MiB, delta: 13029376 bytes 12.4 MiB, wrote 144.5% more than predicted
freespace: trashing: was free: 84942848 bytes 81.0 MiB, need free: 76062720 bytes 72.5 MiB, files created: 248636, delete 25993 (10.5% of them)
freespace: was free: 6086656 bytes 5.8 MiB, wrote: 8331264 bytes 7.9 MiB, delta: 2244608 bytes 2.1 MiB, wrote 36.9% more than predicted
freespace: Test 3 finished

freespace: finished successfully

After the change:

freespace: Test 1: fill the space we have 3 times
freespace: was free: 94048256 bytes 89.7 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 2441216 bytes 2.3 MiB, wrote 2.6% more than predicted
freespace: was free: 92246016 bytes 88.0 MiB, wrote: 96493568 bytes 92.0 MiB, delta: 4247552 bytes 4.1 MiB, wrote 4.6% more than predicted
freespace: was free: 92254208 bytes 88.0 MiB, wrote: 96489472 bytes 92.0 MiB, delta: 4235264 bytes 4.0 MiB, wrote 4.6% more than predicted
freespace: Test 1 finished

freespace: Test 2: gradually lessen amount of free space and fill the FS
freespace: do 10 steps, lessen free space by 8386001 bytes 8.0 MiB each time
freespace: was free: 86605824 bytes 82.6 MiB, wrote: 88252416 bytes 84.2 MiB, delta: 1646592 bytes 1.6 MiB, wrote 1.9% more than predicted
freespace: was free: 78667776 bytes 75.0 MiB, wrote: 80715776 bytes 77.0 MiB, delta: 2048000 bytes 2.0 MiB, wrote 2.6% more than predicted
freespace: was free: 69615616 bytes 66.4 MiB, wrote: 71630848 bytes 68.3 MiB, delta: 2015232 bytes 1.9 MiB, wrote 2.9% more than predicted
freespace: was free: 61018112 bytes 58.2 MiB, wrote: 62783488 bytes 59.9 MiB, delta: 1765376 bytes 1.7 MiB, wrote 2.9% more than predicted
freespace: was free: 52424704 bytes 50.0 MiB, wrote: 53968896 bytes 51.5 MiB, delta: 1544192 bytes 1.5 MiB, wrote 2.9% more than predicted
freespace: was free: 43880448 bytes 41.8 MiB, wrote: 45199360 bytes 43.1 MiB, delta: 1318912 bytes 1.3 MiB, wrote 3.0% more than predicted
freespace: was free: 35332096 bytes 33.7 MiB, wrote: 36425728 bytes 34.7 MiB, delta: 1093632 bytes 1.0 MiB, wrote 3.1% more than predicted
freespace: was free: 26771456 bytes 25.5 MiB, wrote: 27643904 bytes 26.4 MiB, delta: 872448 bytes 852.0 KiB, wrote 3.3% more than predicted
freespace: was free: 18231296 bytes 17.4 MiB, wrote: 18878464 bytes 18.0 MiB, delta: 647168 bytes 632.0 KiB, wrote 3.5% more than predicted
freespace: was free: 9674752 bytes 9.2 MiB, wrote: 10088448 bytes 9.6 MiB, delta: 413696 bytes 404.0 KiB, wrote 4.3% more than predicted
freespace: Test 2 finished

freespace: Test 3: gradually lessen amount of free space by trashing and fill the FS
freespace: do 10 steps, lessen free space by 8397544 bytes 8.0 MiB each time
freespace: trashing: was free: 92372992 bytes 88.1 MiB, need free: 8397552 bytes 8.0 MiB, files created: 248296, delete 225723 (90.9% of them)
freespace: was free: 71909376 bytes 68.6 MiB, wrote: 82472960 bytes 78.7 MiB, delta: 10563584 bytes 10.1 MiB, wrote 14.7% more than predicted
freespace: trashing: was free: 88989696 bytes 84.9 MiB, need free: 16795096 bytes 16.0 MiB, files created: 248794, delete 201838 (81.1% of them)
freespace: was free: 60354560 bytes 57.6 MiB, wrote: 71782400 bytes 68.5 MiB, delta: 11427840 bytes 10.9 MiB, wrote 18.9% more than predicted
freespace: trashing: was free: 90304512 bytes 86.1 MiB, need free: 25192640 bytes 24.0 MiB, files created: 248733, delete 179342 (72.1% of them)
freespace: was free: 51187712 bytes 48.8 MiB, wrote: 62943232 bytes 60.0 MiB, delta: 11755520 bytes 11.2 MiB, wrote 23.0% more than predicted
freespace: trashing: was free: 91209728 bytes 87.0 MiB, need free: 33590184 bytes 32.0 MiB, files created: 248779, delete 157160 (63.2% of them)
freespace: was free: 42704896 bytes 40.7 MiB, wrote: 55050240 bytes 52.5 MiB, delta: 12345344 bytes 11.8 MiB, wrote 28.9% more than predicted
freespace: trashing: was free: 92700672 bytes 88.4 MiB, need free: 41987728 bytes 40.0 MiB, files created: 248848, delete 136135 (54.7% of them)
freespace: was free: 35250176 bytes 33.6 MiB, wrote: 48115712 bytes 45.9 MiB, delta: 12865536 bytes 12.3 MiB, wrote 36.5% more than predicted
freespace: trashing: was free: 93986816 bytes 89.6 MiB, need free: 50385272 bytes 48.1 MiB, files created: 248723, delete 115385 (46.4% of them)
freespace: was free: 29995008 bytes 28.6 MiB, wrote: 41582592 bytes 39.7 MiB, delta: 11587584 bytes 11.1 MiB, wrote 38.6% more than predicted
freespace: trashing: was free: 91881472 bytes 87.6 MiB, need free: 58782816 bytes 56.1 MiB, files created: 248645, delete 89569 (36.0% of them)
freespace: was free: 22511616 bytes 21.5 MiB, wrote: 34705408 bytes 33.1 MiB, delta: 12193792 bytes 11.6 MiB, wrote 54.2% more than predicted
freespace: trashing: was free: 91774976 bytes 87.5 MiB, need free: 67180360 bytes 64.1 MiB, files created: 248580, delete 66616 (26.8% of them)
freespace: was free: 16908288 bytes 16.1 MiB, wrote: 26898432 bytes 25.7 MiB, delta: 9990144 bytes 9.5 MiB, wrote 59.1% more than predicted
freespace: trashing: was free: 92450816 bytes 88.2 MiB, need free: 75577904 bytes 72.1 MiB, files created: 248654, delete 45381 (18.3% of them)
freespace: was free: 10170368 bytes 9.7 MiB, wrote: 19111936 bytes 18.2 MiB, delta: 8941568 bytes 8.5 MiB, wrote 87.9% more than predicted
freespace: trashing: was free: 93282304 bytes 89.0 MiB, need free: 83975448 bytes 80.1 MiB, files created: 248513, delete 24794 (10.0% of them)
freespace: was free: 3911680 bytes 3.7 MiB, wrote: 7872512 bytes 7.5 MiB, delta: 3960832 bytes 3.8 MiB, wrote 101.3% more than predicted
freespace: Test 3 finished

freespace: finished successfully

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/budget.c | 38 ++++++++++++++++++++++++++++++++++----
 fs/ubifs/super.c  | 10 +++++-----
 fs/ubifs/ubifs.h  |  2 +-
 3 files changed, 40 insertions(+), 10 deletions(-)

diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 7851480a6ce..101d278c591 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -747,14 +747,24 @@ long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free)
 }
 
 /**
- * ubifs_budg_get_free_space - return amount of free space.
+ * ubifs_get_free_space - return amount of free space.
  * @c: UBIFS file-system description object
  *
- * This function returns amount of free space on the file-system.
+ * This function calculates amount of free space to report to user-space.
+ *
+ * Because UBIFS may introduce substantial overhead (the index, node headers,
+ * alighment, wastage at the end of eraseblocks, etc), it cannot report real
+ * amount of free flash space it has (well, because not all dirty space is
+ * reclamable, UBIFS does not actually know the real amount). If UBIFS did so,
+ * it would bread user expectetion about what free space is. Users seem to
+ * accustomed to assume that if the file-system reports N bytes of free space,
+ * they would be able to fit a file of N bytes to the FS. This almost works for
+ * traditional file-systems, because they have way less overhead than UBIFS.
+ * So, to keep users happy, UBIFS tries to take the overhead into account.
  */
-long long ubifs_budg_get_free_space(struct ubifs_info *c)
+long long ubifs_get_free_space(struct ubifs_info *c)
 {
-	int min_idx_lebs;
+	int min_idx_lebs, rsvd_idx_lebs, lebs;
 	long long available, outstanding, free;
 
 	spin_lock(&c->space_lock);
@@ -771,6 +781,26 @@ long long ubifs_budg_get_free_space(struct ubifs_info *c)
 	}
 
 	available = ubifs_calc_available(c, min_idx_lebs);
+
+	/*
+	 * When reporting free space to user-space, UBIFS guarantees that it is
+	 * possible to write a file of free space size. This means that for
+	 * empty LEBs we may use more precise calculations than
+	 * 'ubifs_calc_available()' is using. Namely, we know that in empty
+	 * LEBs we would waste only @c->leb_overhead bytes, not @c->dark_wm.
+	 * Thus, amend the available space.
+	 *
+	 * Note, the calculations below are similar to what we have in
+	 * 'do_budget_space()', so refer there for comments.
+	 */
+	if (min_idx_lebs > c->lst.idx_lebs)
+		rsvd_idx_lebs = min_idx_lebs - c->lst.idx_lebs;
+	else
+		rsvd_idx_lebs = 0;
+	lebs = c->lst.empty_lebs + c->freeable_cnt + c->idx_gc_cnt -
+	       c->lst.taken_empty_lebs;
+	lebs -= rsvd_idx_lebs;
+	available += lebs * (c->dark_wm - c->leb_overhead);
 	spin_unlock(&c->space_lock);
 
 	if (available > outstanding)
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index be23fd3cfd8..1207bd51ead 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -371,7 +371,7 @@ static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	struct ubifs_info *c = dentry->d_sb->s_fs_info;
 	unsigned long long free;
 
-	free = ubifs_budg_get_free_space(c);
+	free = ubifs_get_free_space(c);
 	dbg_gen("free space %lld bytes (%lld blocks)",
 		free, free >> UBIFS_BLOCK_SHIFT);
 
@@ -653,11 +653,11 @@ static int init_constants_late(struct ubifs_info *c)
 	 * internally because it does not make much sense for UBIFS, but it is
 	 * necessary to report something for the 'statfs()' call.
 	 *
-	 * Subtract the LEB reserved for GC and the LEB which is reserved for
-	 * deletions.
+	 * Subtract the LEB reserved for GC, the LEB which is reserved for
+	 * deletions, and assume only one journal head is available.
 	 */
-	tmp64 = c->main_lebs - 2;
-	tmp64 *= (uint64_t)c->leb_size - c->dark_wm;
+	tmp64 = c->main_lebs - 2 - c->jhead_cnt + 1;
+	tmp64 *= (uint64_t)c->leb_size - c->leb_overhead;
 	tmp64 = ubifs_reported_space(c, tmp64);
 	c->block_cnt = tmp64 >> UBIFS_BLOCK_SHIFT;
 
diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h
index 57e58541de2..17c620b93ee 100644
--- a/fs/ubifs/ubifs.h
+++ b/fs/ubifs/ubifs.h
@@ -1443,7 +1443,7 @@ void ubifs_release_ino_dirty(struct ubifs_info *c, struct inode *inode,
 				struct ubifs_budget_req *req);
 void ubifs_cancel_ino_op(struct ubifs_info *c, struct inode *inode,
 			 struct ubifs_budget_req *req);
-long long ubifs_budg_get_free_space(struct ubifs_info *c);
+long long ubifs_get_free_space(struct ubifs_info *c);
 int ubifs_calc_min_idx_lebs(struct ubifs_info *c);
 void ubifs_convert_page_budget(struct ubifs_info *c);
 long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free);
-- 
GitLab


From b3385c278d3c32aec68d4900b35bc07df1b2240c Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Sun, 31 Aug 2008 17:13:18 +0300
Subject: [PATCH 577/869] UBIFS: fill f_fsid

UBIFS stores 16-bit UUID in the superblock, and it is a good
idea to return part of it in 'f_fsid' filed of kstatfs structure.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/super.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 1207bd51ead..0dee4042c6c 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -386,6 +386,7 @@ static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	buf->f_files = 0;
 	buf->f_ffree = 0;
 	buf->f_namelen = UBIFS_MAX_NLEN;
+	memcpy(&buf->f_fsid, c->uuid, sizeof(__kernel_fsid_t));
 
 	return 0;
 }
-- 
GitLab


From 6c7be29810dd85b4fe75588ec536446c1579d492 Mon Sep 17 00:00:00 2001
From: Dave Airlie <airlied@redhat.com>
Date: Mon, 1 Sep 2008 08:51:52 +1000
Subject: [PATCH 578/869] drm/radeon: downgrade debug message from info to
 debug.

If this triggers its bad, however some machines seem to have been
triggering it for ages and we didn't know until we added the debug.

So downgrade the debug now so people don't call this a regression.

Signed-off-by: Dave Airlie <airlied@redhat.com>
---
 drivers/gpu/drm/radeon/radeon_cp.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 3331f88dcfb..248ab4a7d39 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -223,7 +223,7 @@ static int radeon_do_wait_for_fifo(drm_radeon_private_t * dev_priv, int entries)
 			return 0;
 		DRM_UDELAY(1);
 	}
-	DRM_INFO("wait for fifo failed status : 0x%08X 0x%08X\n",
+	DRM_DEBUG("wait for fifo failed status : 0x%08X 0x%08X\n",
 		 RADEON_READ(RADEON_RBBM_STATUS),
 		 RADEON_READ(R300_VAP_CNTL_STATUS));
 
@@ -252,7 +252,7 @@ static int radeon_do_wait_for_idle(drm_radeon_private_t * dev_priv)
 		}
 		DRM_UDELAY(1);
 	}
-	DRM_INFO("wait idle failed status : 0x%08X 0x%08X\n",
+	DRM_DEBUG("wait idle failed status : 0x%08X 0x%08X\n",
 		 RADEON_READ(RADEON_RBBM_STATUS),
 		 RADEON_READ(R300_VAP_CNTL_STATUS));
 
-- 
GitLab


From 271f5a9b8f8ae0db95de72779d115c9d0b9d3cc5 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Mon, 1 Sep 2008 12:32:52 +1000
Subject: [PATCH 579/869] Remove invalidate_partition call from do_md_stop.

When stopping an md array, or just switching to read-only, we
currently call invalidate_partition while holding the mddev lock.
The main reason for this is probably to ensure all dirty buffers
are flushed (invalidate_partition calls fsync_bdev).

However if any dirty buffers are found, it will almost certainly cause
a deadlock as starting writeout will require an update to the
superblock, and performing that updates requires taking the mddev
lock - which is already held.

This deadlock can be demonstrated by running "reboot -f -n" with
a root filesystem on md/raid, and some dirty buffers in memory.

All other calls to stop an array should already happen after a flush.
The normal sequence is to stop using the array (e.g. umount) which
will cause __blkdev_put to call sync_blockdev.  Then open the
array and issue the STOP_ARRAY ioctl while the buffers are all still
clean.

So this invalidate_partition is normally a no-op, except for one case
where it will cause a deadlock.

So remove it.

This patch possibly addresses the regression recored in
   http://bugzilla.kernel.org/show_bug.cgi?id=11460
and
   http://bugzilla.kernel.org/show_bug.cgi?id=11452

though it isn't yet clear how it ever worked.


Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/md.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8cfadc5bd2b..4790c83d78d 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3841,8 +3841,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
 
 		del_timer_sync(&mddev->safemode_timer);
 
-		invalidate_partition(disk, 0);
-
 		switch(mode) {
 		case 1: /* readonly */
 			err  = -ENXIO;
-- 
GitLab


From b2d2c4ceaddc3098f19637a732f74b820a81a9e7 Mon Sep 17 00:00:00 2001
From: NeilBrown <neilb@suse.de>
Date: Mon, 1 Sep 2008 12:48:13 +1000
Subject: [PATCH 580/869] Fix problem with waiting while holding rcu read lock
 in md/bitmap.c

A recent patch to protect the rdev list with rcu locking leaves us
with a problem because we can sleep on memalloc while holding the
rcu lock.

The rcu lock is only needed while walking the linked list as
uninteresting devices (failed or spares) can be removed at any time.

So only take the rcu lock while actually walking the linked list.
Take a refcount on the rdev during the time when we drop the lock
and do the memalloc to start IO.
When we return to the locked code, all the interesting devices
on the list will not have moved, so we can simply use
list_for_each_continue_rcu to pick up where we left off.

Signed-off-by: NeilBrown <neilb@suse.de>
---
 drivers/md/bitmap.c | 45 ++++++++++++++++++++++++++++++++++++++-------
 1 file changed, 38 insertions(+), 7 deletions(-)

diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 7e65bad522c..ac89a5deaca 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -238,15 +238,47 @@ static struct page *read_sb_page(mddev_t *mddev, long offset, unsigned long inde
 
 }
 
+static mdk_rdev_t *next_active_rdev(mdk_rdev_t *rdev, mddev_t *mddev)
+{
+	/* Iterate the disks of an mddev, using rcu to protect access to the
+	 * linked list, and raising the refcount of devices we return to ensure
+	 * they don't disappear while in use.
+	 * As devices are only added or removed when raid_disk is < 0 and
+	 * nr_pending is 0 and In_sync is clear, the entries we return will
+	 * still be in the same position on the list when we re-enter
+	 * list_for_each_continue_rcu.
+	 */
+	struct list_head *pos;
+	rcu_read_lock();
+	if (rdev == NULL)
+		/* start at the beginning */
+		pos = &mddev->disks;
+	else {
+		/* release the previous rdev and start from there. */
+		rdev_dec_pending(rdev, mddev);
+		pos = &rdev->same_set;
+	}
+	list_for_each_continue_rcu(pos, &mddev->disks) {
+		rdev = list_entry(pos, mdk_rdev_t, same_set);
+		if (rdev->raid_disk >= 0 &&
+		    test_bit(In_sync, &rdev->flags) &&
+		    !test_bit(Faulty, &rdev->flags)) {
+			/* this is a usable devices */
+			atomic_inc(&rdev->nr_pending);
+			rcu_read_unlock();
+			return rdev;
+		}
+	}
+	rcu_read_unlock();
+	return NULL;
+}
+
 static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
 {
-	mdk_rdev_t *rdev;
+	mdk_rdev_t *rdev = NULL;
 	mddev_t *mddev = bitmap->mddev;
 
-	rcu_read_lock();
-	rdev_for_each_rcu(rdev, mddev)
-		if (test_bit(In_sync, &rdev->flags)
-		    && !test_bit(Faulty, &rdev->flags)) {
+	while ((rdev = next_active_rdev(rdev, mddev)) != NULL) {
 			int size = PAGE_SIZE;
 			if (page->index == bitmap->file_pages-1)
 				size = roundup(bitmap->last_page_size,
@@ -281,8 +313,7 @@ static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait)
 				       + page->index * (PAGE_SIZE/512),
 				       size,
 				       page);
-		}
-	rcu_read_unlock();
+	}
 
 	if (wait)
 		md_super_wait(mddev);
-- 
GitLab


From 20f5f95ded9cdab62c26efb146967a75e12533ec Mon Sep 17 00:00:00 2001
From: Matthew Ranostay <mranostay@embeddedalley.com>
Date: Mon, 1 Sep 2008 08:17:56 +0200
Subject: [PATCH 581/869] ALSA: hda: Distortion fix for dell_m6_core_init

Added the EQ distortion fix to the dell_m6_core_init.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_sigmatel.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 7fdafcb0015..ad994fcab72 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -560,8 +560,9 @@ static struct hda_verb dell_eq_core_init[] = {
 };
 
 static struct hda_verb dell_m6_core_init[] = {
-	/* set master volume and direct control */
-	{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
+	/* set master volume to max value without distortion
+	 * and direct control */
+	{ 0x1f, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xec},
 	/* setup audio connections */
 	{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00},
 	{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
-- 
GitLab


From 6e5ea7015c62b672020ee0a7c2764942fe63fa25 Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Sun, 31 Aug 2008 00:45:02 +0400
Subject: [PATCH 582/869] ALSA: ASoC: fix pxa2xx-i2s clk_get call

pxa2xx-i2s: probe actual device and use it for clk_get call
thus fixing error during startup hook

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/soc/pxa/pxa2xx-i2s.c | 40 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/sound/soc/pxa/pxa2xx-i2s.c b/sound/soc/pxa/pxa2xx-i2s.c
index 8548818eea0..c796b188277 100644
--- a/sound/soc/pxa/pxa2xx-i2s.c
+++ b/sound/soc/pxa/pxa2xx-i2s.c
@@ -16,6 +16,7 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
+#include <linux/platform_device.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/initval.h>
@@ -81,7 +82,6 @@ static int pxa2xx_i2s_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
 
-	clk_i2s = clk_get(NULL, "I2SCLK");
 	if (IS_ERR(clk_i2s))
 		return PTR_ERR(clk_i2s);
 
@@ -152,6 +152,7 @@ static int pxa2xx_i2s_hw_params(struct snd_pcm_substream *substream,
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].tx);
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].frm);
 	pxa_gpio_mode(gpio_bus[pxa_i2s.master].clk);
+	BUG_ON(IS_ERR(clk_i2s));
 	clk_enable(clk_i2s);
 	pxa_i2s_wait();
 
@@ -317,6 +318,43 @@ struct snd_soc_dai pxa_i2s_dai = {
 
 EXPORT_SYMBOL_GPL(pxa_i2s_dai);
 
+static int pxa2xx_i2s_probe(struct platform_device *dev)
+{
+	clk_i2s = clk_get(&dev->dev, "I2SCLK");
+	return IS_ERR(clk_i2s) ? PTR_ERR(clk_i2s) : 0;
+}
+
+static int __devexit pxa2xx_i2s_remove(struct platform_device *dev)
+{
+	clk_put(clk_i2s);
+	clk_i2s = ERR_PTR(-ENOENT);
+	return 0;
+}
+
+static struct platform_driver pxa2xx_i2s_driver = {
+	.probe = pxa2xx_i2s_probe,
+	.remove = __devexit_p(pxa2xx_i2s_remove),
+
+	.driver = {
+		.name = "pxa2xx-i2s",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init pxa2xx_i2s_init(void)
+{
+	clk_i2s = ERR_PTR(-ENOENT);
+	return platform_driver_register(&pxa2xx_i2s_driver);
+}
+
+static void __exit pxa2xx_i2s_exit(void)
+{
+	platform_driver_unregister(&pxa2xx_i2s_driver);
+}
+
+module_init(pxa2xx_i2s_init);
+module_exit(pxa2xx_i2s_exit);
+
 /* Module information */
 MODULE_AUTHOR("Liam Girdwood, liam.girdwood@wolfsonmicro.com, www.wolfsonmicro.com");
 MODULE_DESCRIPTION("pxa2xx I2S SoC Interface");
-- 
GitLab


From ddef43a843f620c6742a06633739887a901ec06b Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Mon, 1 Sep 2008 08:55:10 +0200
Subject: [PATCH 583/869] block: restore original behavior of /proc/partition
 when there's no partition

/proc/partitions didn't use to write out the header if there was no
partition.  However, recent commit 66c64afe changed the behavior.
This is nothing major but there's no reason to change user visible
behavior without a good rationale.  Restore the original behavior.

Note that 2.6.28 has clean up changes scheduled which will replace
this rather hacky implementation.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
---
 block/genhd.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/block/genhd.c b/block/genhd.c
index d9743ff6789..e0ce23ac2ec 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -307,7 +307,7 @@ static void *part_start(struct seq_file *part, loff_t *pos)
 	loff_t k = *pos;
 
 	if (!k)
-		seq_puts(part, "major minor  #blocks  name\n\n");
+		part->private = (void *)1LU;	/* tell show to print header */
 
 	mutex_lock(&block_class_lock);
 	dev = class_find_device(&block_class, NULL, &k, find_start);
@@ -349,6 +349,17 @@ static int show_partition(struct seq_file *part, void *v)
 	int n;
 	char buf[BDEVNAME_SIZE];
 
+	/*
+	 * Print header if start told us to do.  This is to preserve
+	 * the original behavior of not printing header if no
+	 * partition exists.  This hackery will be removed later with
+	 * class iteration clean up.
+	 */
+	if (part->private) {
+		seq_puts(part, "major minor  #blocks  name\n\n");
+		part->private = NULL;
+	}
+
 	/* Don't show non-partitionable removeable devices or empty devices */
 	if (!get_capacity(sgp) ||
 			(sgp->minors == 1 && (sgp->flags & GENHD_FL_REMOVABLE)))
-- 
GitLab


From 673d62cc5ea6fca046650f17f77985b112c62322 Mon Sep 17 00:00:00 2001
From: Vegard Nossum <vegard.nossum@gmail.com>
Date: Sun, 31 Aug 2008 23:39:21 +0200
Subject: [PATCH 584/869] debugobjects: fix lockdep warning

Daniel J. Blueman reported:
> =======================================================
> [ INFO: possible circular locking dependency detected ]
> 2.6.27-rc4-224c #1
> -------------------------------------------------------
> hald/4680 is trying to acquire lock:
>  (&n->list_lock){++..}, at: [<ffffffff802bfa26>] add_partial+0x26/0x80
>
> but task is already holding lock:
>  (&obj_hash[i].lock){++..}, at: [<ffffffff8041cfdc>]
> debug_object_free+0x5c/0x120

We fix it by moving the actual freeing to outside the lock (the lock
now only protects the list).

The pool lock is also promoted to irq-safe (suggested by Dan). It's
necessary because free_pool is now called outside the irq disabled
region. So we need to protect against an interrupt handler which calls
debug_object_init().

[tglx@linutronix.de: added hlist_move_list helper to avoid looping
		     through the list twice]

Reported-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 include/linux/list.h | 13 +++++++++++++
 lib/debugobjects.c   | 31 +++++++++++++++++++++++--------
 2 files changed, 36 insertions(+), 8 deletions(-)

diff --git a/include/linux/list.h b/include/linux/list.h
index db35ef02e74..969f6e92d08 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -619,6 +619,19 @@ static inline void hlist_add_after(struct hlist_node *n,
 		next->next->pprev  = &next->next;
 }
 
+/*
+ * Move a list from one list head to another. Fixup the pprev
+ * reference of the first entry if it exists.
+ */
+static inline void hlist_move_list(struct hlist_head *old,
+				   struct hlist_head *new)
+{
+	new->first = old->first;
+	if (new->first)
+		new->first->pprev = &new->first;
+	old->first = NULL;
+}
+
 #define hlist_entry(ptr, type, member) container_of(ptr,type,member)
 
 #define hlist_for_each(pos, head) \
diff --git a/lib/debugobjects.c b/lib/debugobjects.c
index 45a6bde762d..e3ab374e133 100644
--- a/lib/debugobjects.c
+++ b/lib/debugobjects.c
@@ -112,6 +112,7 @@ static struct debug_obj *lookup_object(void *addr, struct debug_bucket *b)
 
 /*
  * Allocate a new object. If the pool is empty, switch off the debugger.
+ * Must be called with interrupts disabled.
  */
 static struct debug_obj *
 alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr)
@@ -148,17 +149,18 @@ alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr)
 static void free_object(struct debug_obj *obj)
 {
 	unsigned long idx = (unsigned long)(obj - obj_static_pool);
+	unsigned long flags;
 
 	if (obj_pool_free < ODEBUG_POOL_SIZE || idx < ODEBUG_POOL_SIZE) {
-		spin_lock(&pool_lock);
+		spin_lock_irqsave(&pool_lock, flags);
 		hlist_add_head(&obj->node, &obj_pool);
 		obj_pool_free++;
 		obj_pool_used--;
-		spin_unlock(&pool_lock);
+		spin_unlock_irqrestore(&pool_lock, flags);
 	} else {
-		spin_lock(&pool_lock);
+		spin_lock_irqsave(&pool_lock, flags);
 		obj_pool_used--;
-		spin_unlock(&pool_lock);
+		spin_unlock_irqrestore(&pool_lock, flags);
 		kmem_cache_free(obj_cache, obj);
 	}
 }
@@ -171,6 +173,7 @@ static void debug_objects_oom(void)
 {
 	struct debug_bucket *db = obj_hash;
 	struct hlist_node *node, *tmp;
+	HLIST_HEAD(freelist);
 	struct debug_obj *obj;
 	unsigned long flags;
 	int i;
@@ -179,11 +182,14 @@ static void debug_objects_oom(void)
 
 	for (i = 0; i < ODEBUG_HASH_SIZE; i++, db++) {
 		spin_lock_irqsave(&db->lock, flags);
-		hlist_for_each_entry_safe(obj, node, tmp, &db->list, node) {
+		hlist_move_list(&db->list, &freelist);
+		spin_unlock_irqrestore(&db->lock, flags);
+
+		/* Now free them */
+		hlist_for_each_entry_safe(obj, node, tmp, &freelist, node) {
 			hlist_del(&obj->node);
 			free_object(obj);
 		}
-		spin_unlock_irqrestore(&db->lock, flags);
 	}
 }
 
@@ -498,8 +504,9 @@ void debug_object_free(void *addr, struct debug_obj_descr *descr)
 		return;
 	default:
 		hlist_del(&obj->node);
+		spin_unlock_irqrestore(&db->lock, flags);
 		free_object(obj);
-		break;
+		return;
 	}
 out_unlock:
 	spin_unlock_irqrestore(&db->lock, flags);
@@ -510,6 +517,7 @@ static void __debug_check_no_obj_freed(const void *address, unsigned long size)
 {
 	unsigned long flags, oaddr, saddr, eaddr, paddr, chunks;
 	struct hlist_node *node, *tmp;
+	HLIST_HEAD(freelist);
 	struct debug_obj_descr *descr;
 	enum debug_obj_state state;
 	struct debug_bucket *db;
@@ -545,11 +553,18 @@ repeat:
 				goto repeat;
 			default:
 				hlist_del(&obj->node);
-				free_object(obj);
+				hlist_add_head(&obj->node, &freelist);
 				break;
 			}
 		}
 		spin_unlock_irqrestore(&db->lock, flags);
+
+		/* Now free them */
+		hlist_for_each_entry_safe(obj, node, tmp, &freelist, node) {
+			hlist_del(&obj->node);
+			free_object(obj);
+		}
+
 		if (cnt > debug_objects_maxchain)
 			debug_objects_maxchain = cnt;
 	}
-- 
GitLab


From 9e3f544d792fd2ff7e31ca4a72e5194f1491ed14 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Date: Wed, 20 Aug 2008 15:46:24 +0200
Subject: [PATCH 585/869] avr32: Fix lockup after Java stack underflow in user
 mode

When using the Java Extension Module hardware, a Java stack underflow or
overflow trap may cause the system to enter an infinite exception loop.
Although there's no kernel support for the Java hardware yet, we need to
be able to recover from this situation and keep the system running.

This patch adds code to detect and fixup this situation in the critical
exception handler and terminate the faulting process. We may have to
rethink how to handle this more gracefully when the necessary kernel
support for hardware-accelerated Java is added.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/kernel/asm-offsets.c  |  6 ++++
 arch/avr32/kernel/entry-avr32b.S | 59 ++++++++++++++++++++++++++++++--
 2 files changed, 63 insertions(+), 2 deletions(-)

diff --git a/arch/avr32/kernel/asm-offsets.c b/arch/avr32/kernel/asm-offsets.c
index e4796c67a83..d6a8193a1d2 100644
--- a/arch/avr32/kernel/asm-offsets.c
+++ b/arch/avr32/kernel/asm-offsets.c
@@ -4,6 +4,8 @@
  * to extract and format the required data.
  */
 
+#include <linux/mm.h>
+#include <linux/sched.h>
 #include <linux/thread_info.h>
 #include <linux/kbuild.h>
 
@@ -17,4 +19,8 @@ void foo(void)
 	OFFSET(TI_rar_saved, thread_info, rar_saved);
 	OFFSET(TI_rsr_saved, thread_info, rsr_saved);
 	OFFSET(TI_restart_block, thread_info, restart_block);
+	BLANK();
+	OFFSET(TSK_active_mm, task_struct, active_mm);
+	BLANK();
+	OFFSET(MM_pgd, mm_struct, pgd);
 }
diff --git a/arch/avr32/kernel/entry-avr32b.S b/arch/avr32/kernel/entry-avr32b.S
index 2b398cae110..33d49377b8b 100644
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
@@ -334,9 +334,64 @@ save_full_context_ex:
 
 	/* Low-level exception handlers */
 handle_critical:
+	/*
+	 * AT32AP700x errata:
+	 *
+	 * After a Java stack overflow or underflow trap, any CPU
+	 * memory access may cause erratic behavior. This will happen
+	 * when the four least significant bits of the JOSP system
+	 * register contains any value between 9 and 15 (inclusive).
+	 *
+	 * Possible workarounds:
+	 *   - Don't use the Java Extension Module
+	 *   - Ensure that the stack overflow and underflow trap
+	 *     handlers do not do any memory access or trigger any
+	 *     exceptions before the overflow/underflow condition is
+	 *     cleared (by incrementing or decrementing the JOSP)
+	 *   - Make sure that JOSP does not contain any problematic
+	 *     value before doing any exception or interrupt
+	 *     processing.
+	 *   - Set up a critical exception handler which writes a
+	 *     known-to-be-safe value, e.g. 4, to JOSP before doing
+	 *     any further processing.
+	 *
+	 * We'll use the last workaround for now since we cannot
+	 * guarantee that user space processes don't use Java mode.
+	 * Non-well-behaving userland will be terminated with extreme
+	 * prejudice.
+	 */
+#ifdef CONFIG_CPU_AT32AP700X
+	/*
+	 * There's a chance we can't touch memory, so temporarily
+	 * borrow PTBR to save the stack pointer while we fix things
+	 * up...
+	 */
+	mtsr	SYSREG_PTBR, sp
+	mov	sp, 4
+	mtsr	SYSREG_JOSP, sp
+	mfsr	sp, SYSREG_PTBR
+	sub	pc, -2
+
+	/* Push most of pt_regs on stack. We'll do the rest later */
 	sub	sp, 4
-	stmts	--sp, r0-lr
-	rcall	save_full_context_ex
+	pushm	r0-r12
+
+	/* PTBR mirrors current_thread_info()->task->active_mm->pgd */
+	get_thread_info r0
+	ld.w	r1, r0[TI_task]
+	ld.w	r2, r1[TSK_active_mm]
+	ld.w	r3, r2[MM_pgd]
+	mtsr	SYSREG_PTBR, r3
+#else
+	sub	sp, 4
+	pushm	r0-r12
+#endif
+	sub	r0, sp, -(14 * 4)
+	mov	r1, lr
+	mfsr	r2, SYSREG_RAR_EX
+	mfsr	r3, SYSREG_RSR_EX
+	pushm	r0-r3
+
 	mfsr	r12, SYSREG_ECR
 	mov	r11, sp
 	rcall	do_critical_exception
-- 
GitLab


From 84c4f2f21a8e6e6d4bdfff95bf5ddc7925df4e01 Mon Sep 17 00:00:00 2001
From: Humphrey Bucknell <hbucknell@saitek.com>
Date: Fri, 29 Aug 2008 16:27:00 +0100
Subject: [PATCH 586/869] avr32: pm_standby low-power ram bug fix

The value stored into the SDRAMC LPR register should be the current
value of the register with the Self-refresh value set in the lower bit
field.

The bug involved only the Self-refresh value being written to the
register, thus over writing any low-power ram settings.

Signed-off-by: Humphrey Bucknell <hbucknell@saitek.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
---
 arch/avr32/mach-at32ap/pm-at32ap700x.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
index 5be4de65b20..17503b0ed6c 100644
--- a/arch/avr32/mach-at32ap/pm-at32ap700x.S
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -134,7 +134,7 @@ pm_standby:
 	mov	r11, SDRAMC_LPR_LPCB_SELF_RFR
 	bfins	r10, r11, 0, 2		/* LPCB <- self Refresh */
 	sync	0			/* flush write buffer */
-	st.w	r12[SDRAMC_LPR], r11	/* put SDRAM in self-refresh mode */
+	st.w	r12[SDRAMC_LPR], r10	/* put SDRAM in self-refresh mode */
 	ld.w	r11, r12[SDRAMC_LPR]
 	unmask_interrupts
 	sleep	CPU_SLEEP_FROZEN
-- 
GitLab


From c228c24bf1138d4757dbe20615df655815446da3 Mon Sep 17 00:00:00 2001
From: Andy Adamson <andros@netapp.com>
Date: Thu, 21 Aug 2008 08:42:16 -0400
Subject: [PATCH 587/869] nfsd: fix compound state allocation error handling

Move the cstate_alloc call so that if it fails, the response is setup to
encode the NFS error. The out label now means that the
nfsd4_compound_state has not been allocated.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 fs/nfsd/nfs4proc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 2e51adac65d..e5b51ffafc6 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -867,11 +867,6 @@ nfsd4_proc_compound(struct svc_rqst *rqstp,
 	int		slack_bytes;
 	__be32		status;
 
-	status = nfserr_resource;
-	cstate = cstate_alloc();
-	if (cstate == NULL)
-		goto out;
-
 	resp->xbuf = &rqstp->rq_res;
 	resp->p = rqstp->rq_res.head[0].iov_base + rqstp->rq_res.head[0].iov_len;
 	resp->tagp = resp->p;
@@ -890,6 +885,11 @@ nfsd4_proc_compound(struct svc_rqst *rqstp,
 	if (args->minorversion > NFSD_SUPPORTED_MINOR_VERSION)
 		goto out;
 
+	status = nfserr_resource;
+	cstate = cstate_alloc();
+	if (cstate == NULL)
+		goto out;
+
 	status = nfs_ok;
 	while (!status && resp->opcnt < args->opcnt) {
 		op = &args->ops[resp->opcnt++];
@@ -957,9 +957,9 @@ encode_op:
 		nfsd4_increment_op_stats(op->opnum);
 	}
 
+	cstate_free(cstate);
 out:
 	nfsd4_release_compoundargs(args);
-	cstate_free(cstate);
 	dprintk("nfsv4 compound returned %d\n", ntohl(status));
 	return status;
 }
-- 
GitLab


From 27df6f25ff218072e0e879a96beeb398a79cdbc8 Mon Sep 17 00:00:00 2001
From: Cyrill Gorcunov <gorcunov@gmail.com>
Date: Sun, 31 Aug 2008 19:25:49 +0400
Subject: [PATCH 588/869] sunrpc: fix possible overrun on read of
 /proc/sys/sunrpc/transports

Vegard Nossum reported
----------------------
> I noticed that something weird is going on with /proc/sys/sunrpc/transports.
> This file is generated in net/sunrpc/sysctl.c, function proc_do_xprt(). When
> I "cat" this file, I get the expected output:
>    $ cat /proc/sys/sunrpc/transports
>    tcp 1048576
>    udp 32768

> But I think that it does not check the length of the buffer supplied by
> userspace to read(). With my original program, I found that the stack was
> being overwritten by the characters above, even when the length given to
> read() was just 1.

David Wagner added (among other things) that copy_to_user could be
probably used here.

Ingo Oeser suggested to use simple_read_from_buffer() here.

The conclusion is that proc_do_xprt doesn't check for userside buffer
size indeed so fix this by using Ingo's suggestion.

Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
CC: Ingo Oeser <ioe-lkml@rameria.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Greg Banks <gnb@sgi.com>
Cc: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
---
 net/sunrpc/sysctl.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/net/sunrpc/sysctl.c b/net/sunrpc/sysctl.c
index 0f8c439b848..5231f7aaac0 100644
--- a/net/sunrpc/sysctl.c
+++ b/net/sunrpc/sysctl.c
@@ -60,24 +60,14 @@ static int proc_do_xprt(ctl_table *table, int write, struct file *file,
 			void __user *buffer, size_t *lenp, loff_t *ppos)
 {
 	char tmpbuf[256];
-	int len;
+	size_t len;
+
 	if ((*ppos && !write) || !*lenp) {
 		*lenp = 0;
 		return 0;
 	}
-	if (write)
-		return -EINVAL;
-	else {
-		len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
-		if (!access_ok(VERIFY_WRITE, buffer, len))
-			return -EFAULT;
-
-		if (__copy_to_user(buffer, tmpbuf, len))
-			return -EFAULT;
-	}
-	*lenp -= len;
-	*ppos += len;
-	return 0;
+	len = svc_print_xprts(tmpbuf, sizeof(tmpbuf));
+	return simple_read_from_buffer(buffer, *lenp, ppos, tmpbuf, len);
 }
 
 static int
-- 
GitLab


From 91b80969ba466ba4b915a4a1d03add8c297add3f Mon Sep 17 00:00:00 2001
From: "J. Bruce Fields" <bfields@citi.umich.edu>
Date: Fri, 29 Aug 2008 19:18:45 -0400
Subject: [PATCH 589/869] nfsd: fix buffer overrun decoding NFSv4 acl

The array we kmalloc() here is not large enough.

Thanks to Johann Dahm and David Richter for bug report and testing.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: David Richter <richterd@citi.umich.edu>
Tested-by: Johann Dahm <jdahm@umich.edu>
---
 fs/nfsd/nfs4acl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/nfsd/nfs4acl.c b/fs/nfsd/nfs4acl.c
index b6ed38380ab..54b8b4140c8 100644
--- a/fs/nfsd/nfs4acl.c
+++ b/fs/nfsd/nfs4acl.c
@@ -443,7 +443,7 @@ init_state(struct posix_acl_state *state, int cnt)
 	 * enough space for either:
 	 */
 	alloc = sizeof(struct posix_ace_state_array)
-		+ cnt*sizeof(struct posix_ace_state);
+		+ cnt*sizeof(struct posix_user_ace_state);
 	state->users = kzalloc(alloc, GFP_KERNEL);
 	if (!state->users)
 		return -ENOMEM;
-- 
GitLab


From c4bacefb7aaf49da11a695f29d85d40909f17693 Mon Sep 17 00:00:00 2001
From: Cordelia <cordsam@linux.vnet.ibm.com>
Date: Mon, 18 Aug 2008 09:45:51 -0700
Subject: [PATCH 590/869] [PATCH] audit: Moved variable declaration to
 beginning of function

got rid of compilation warning:
ISO C90 forbids mixed declarations and code

Signed-off-by: Cordelia Sam <cordesam@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 kernel/auditsc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/kernel/auditsc.c b/kernel/auditsc.c
index 972f8e61d36..59cedfb040e 100644
--- a/kernel/auditsc.c
+++ b/kernel/auditsc.c
@@ -243,10 +243,11 @@ static inline int open_arg(int flags, int mask)
 
 static int audit_match_perm(struct audit_context *ctx, int mask)
 {
+	unsigned n;
 	if (unlikely(!ctx))
 		return 0;
 
-	unsigned n = ctx->major;
+	n = ctx->major;
 	switch (audit_classify_syscall(ctx->arch, n)) {
 	case 0:	/* native */
 		if ((mask & AUDIT_PERM_WRITE) &&
-- 
GitLab


From 1cede1affb3cc5a9520fdbc75b3fbaa6432cbc5a Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Mon, 1 Sep 2008 10:54:46 +0100
Subject: [PATCH 591/869] Fix modules_install on RO nfs-exported trees.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=11355 by avoiding a
needless rebuild of the firmware/ihex2fw tool.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 firmware/Makefile | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/firmware/Makefile b/firmware/Makefile
index 9fe86041f86..da75a6fbc6b 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -146,15 +146,27 @@ $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
 $(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex)
 
+# Don't depend on ihex2fw if we're installing and it already exists.
+# Putting it after | in the dependencies doesn't seem sufficient when
+# we're installing after a cross-compile, because ihex2fw has dependencies
+# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and 
+# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
+# is exported read-only for someone to run 'make install'.
+ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
+ihex2fw_dep :=
+else
+ihex2fw_dep := $(obj)/ihex2fw
+endif
+
 # .HEX is also Intel HEX, but where the offset and length in each record
 # is actually meaningful, because the firmware has to be loaded in a certain
 # order rather than as a single binary blob. Thus, we convert them into our
 # more compact binary representation of ihex records (<linux/ihex.h>)
-$(obj)/%.fw: $(obj)/%.HEX $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,ihex2fw)
 
 # .H16 is our own modified form of Intel HEX, with 16-bit length for records.
-$(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
+$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
 	$(call cmd,h16tofw)
 
 $(firmware-dirs):
-- 
GitLab


From 0ed97ee470c36e05bcaad36c4fb4c501f383ce63 Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Mon, 1 Sep 2008 11:10:28 +0100
Subject: [PATCH 592/869] Remove '#include <stddef.h>' from mm/page_isolation.c

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 mm/page_isolation.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index 3444b58033c..c69f84fe038 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -2,7 +2,6 @@
  * linux/mm/page_isolation.c
  */
 
-#include <stddef.h>
 #include <linux/mm.h>
 #include <linux/page-isolation.h>
 #include <linux/pageblock-flags.h>
-- 
GitLab


From 02c0267a40c876a4d70f2000f21fe9ff89fb988e Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Thu, 28 Aug 2008 01:04:30 +0300
Subject: [PATCH 593/869] dabusb_fpga_download(): fix a memory leak

This patch fixes a memory leak in an error path.

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/media/video/dabusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index 48f4b92a8f8..79faedf5852 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -403,6 +403,7 @@ static int dabusb_fpga_download (pdabusb_t s, const char *fname)
 	ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev);
 	if (ret) {
 		err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret);
+		kfree(b);
 		return ret;
 	}
 
-- 
GitLab


From b67c5f87c13f398ec3f4d6b455cb0bbeda8d7ac0 Mon Sep 17 00:00:00 2001
From: Zev Weiss <zevweiss@gmail.com>
Date: Mon, 1 Sep 2008 05:02:12 -0700
Subject: [PATCH 594/869] [MTD] mtdchar.c: Fix regression in MEMGETREGIONINFO
 ioctl()

The MEMGETREGIONINFO ioctl() in mtdchar.c was clobbering user memory by
overwriting more than intended, due the size of struct mtd_erase_region_info
changing in commit 0ecbc81adfcb9f15f86b05ff576b342ce81bbef8 ('Support
for auto locking flash on power up').

Fix avoids this by copying struct members one by one with put_user(), as there
is no longer a convenient struct to use the size of as the length argument to
copy_to_user().

Signed-off-by: Zev Weiss <zevweiss@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/mtdchar.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index d2f331876e4..e00d424e657 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -410,16 +410,20 @@ static int mtd_ioctl(struct inode *inode, struct file *file,
 
 	case MEMGETREGIONINFO:
 	{
-		struct region_info_user ur;
+		uint32_t ur_idx;
+		struct mtd_erase_region_info *kr;
+		struct region_info_user *ur = (struct region_info_user *) argp;
 
-		if (copy_from_user(&ur, argp, sizeof(struct region_info_user)))
+		if (get_user(ur_idx, &(ur->regionindex)))
 			return -EFAULT;
 
-		if (ur.regionindex >= mtd->numeraseregions)
-			return -EINVAL;
-		if (copy_to_user(argp, &(mtd->eraseregions[ur.regionindex]),
-				sizeof(struct mtd_erase_region_info)))
+		kr = &(mtd->eraseregions[ur_idx]);
+
+		if (put_user(kr->offset, &(ur->offset))
+		    || put_user(kr->erasesize, &(ur->erasesize))
+		    || put_user(kr->numblocks, &(ur->numblocks)))
 			return -EFAULT;
+
 		break;
 	}
 
-- 
GitLab


From 24fb9173815045ab3f85a670d7df8af5af6ff3be Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 2 Sep 2008 14:48:20 +0200
Subject: [PATCH 595/869] ALSA: hda - Fix ALC663 auto-probe

Fix the wrong DAC assignment for NID 0x17 mono-pin on ALC663.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d6ec9eef291..635748b122e 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -14066,6 +14066,13 @@ static struct hda_verb alc662_auto_init_verbs[] = {
 	{ }
 };
 
+/* additional verbs for ALC663 */
+static struct hda_verb alc663_auto_init_verbs[] = {
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+	{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	{ }
+};
+
 static struct hda_verb alc663_m51va_init_verbs[] = {
 	{0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
 	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
@@ -14594,6 +14601,14 @@ static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
 	if (!pin)
 		return 0;
 
+	if (pin == 0x17) {
+		/* ALC663 has a mono output pin on 0x17 */
+		sprintf(name, "%s Playback Switch", pfx);
+		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+				  HDA_COMPOSE_AMP_VAL(pin, 2, 0, HDA_OUTPUT));
+		return err;
+	}
+
 	if (alc880_is_fixed_pin(pin)) {
 		nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
                 /* printk("DAC nid=%x\n",nid); */
@@ -14764,6 +14779,9 @@ static int alc662_parse_auto_config(struct hda_codec *codec)
 	spec->input_mux = &spec->private_imux;
 	
 	spec->init_verbs[spec->num_init_verbs++] = alc662_auto_init_verbs;
+	if (codec->vendor_id == 0x10ec0663)
+		spec->init_verbs[spec->num_init_verbs++] =
+			alc663_auto_init_verbs;
 	spec->mixers[spec->num_mixers] = alc662_capture_mixer;
 	spec->num_mixers++;
 	return 1;
-- 
GitLab


From ee979a143cfd999adea8a9e272649a3cd9ec84bc Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Tue, 2 Sep 2008 15:42:20 +0200
Subject: [PATCH 596/869] ALSA: hda - Add mic-boost controls to ALC662/663 auto
 configuration

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/patch_realtek.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 635748b122e..66025161bd6 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -14782,6 +14782,11 @@ static int alc662_parse_auto_config(struct hda_codec *codec)
 	if (codec->vendor_id == 0x10ec0663)
 		spec->init_verbs[spec->num_init_verbs++] =
 			alc663_auto_init_verbs;
+
+	err = alc_auto_add_mic_boost(codec);
+	if (err < 0)
+		return err;
+
 	spec->mixers[spec->num_mixers] = alc662_capture_mixer;
 	spec->num_mixers++;
 	return 1;
-- 
GitLab


From 011fec7486028977e2b4012afb84235759c6ad82 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue, 2 Sep 2008 10:38:28 -0700
Subject: [PATCH 597/869] Un-break printk strings in x86 PCI probing code

Breaking lines due to some imaginary problem with a long line length is
often stupid and wrong, but never more so when it splits a string that
is printed out into multiple lines.  This really ended up making it much
harder to find where some error strings were printed out, because a
simple 'grep' didn't work.

I'm sure there is tons more of this particular idiocy hiding in other
places, but this particular case hit me once more last week. So fix it.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/pci/i386.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 5807d1bc73f..8791fc55e71 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -128,8 +128,7 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				pr = pci_find_parent_resource(dev, r);
 				if (!r->start || !pr ||
 				    request_resource(pr, r) < 0) {
-					dev_err(&dev->dev, "BAR %d: can't "
-						"allocate resource\n", idx);
+					dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
 					/*
 					 * Something is wrong with the region.
 					 * Invalidate the resource to prevent
@@ -164,15 +163,13 @@ static void __init pcibios_allocate_resources(int pass)
 			else
 				disabled = !(command & PCI_COMMAND_MEMORY);
 			if (pass == disabled) {
-				dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
-					"(f=%lx, d=%d, p=%d)\n",
+				dev_dbg(&dev->dev, "resource %#08llx-%#08llx (f=%lx, d=%d, p=%d)\n",
 					(unsigned long long) r->start,
 					(unsigned long long) r->end,
 					r->flags, disabled, pass);
 				pr = pci_find_parent_resource(dev, r);
 				if (!pr || request_resource(pr, r) < 0) {
-					dev_err(&dev->dev, "BAR %d: can't "
-						"allocate resource\n", idx);
+					dev_err(&dev->dev, "BAR %d: can't allocate resource\n", idx);
 					/* We'll assign a new address later */
 					r->end -= r->start;
 					r->start = 0;
-- 
GitLab


From 6781f4ae30bbb8ebf31187b3c9304be16966f5a0 Mon Sep 17 00:00:00 2001
From: Randy Dunlap <randy.dunlap@oracle.com>
Date: Sun, 31 Aug 2008 20:31:55 -0700
Subject: [PATCH 598/869] kernel/resource.c: fix new kernel-doc warning

Fix kernel-doc warning for new function:

Warning(linux-2.6.27-rc5-git2//kernel/resource.c:448): No description found for parameter 'root'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/resource.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/resource.c b/kernel/resource.c
index cf0a178c751..03d796c1b2e 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -438,7 +438,7 @@ int insert_resource(struct resource *parent, struct resource *new)
 
 /**
  * insert_resource_expand_to_fit - Insert a resource into the resource tree
- * @parent: parent of the new resource
+ * @root: root resource descriptor
  * @new: new resource to insert
  *
  * Insert a resource into the resource tree, possibly expanding it in order
-- 
GitLab


From cbaed698f37494b30b2449b51c728ae48630cb2b Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Sat, 30 Aug 2008 21:08:40 +0400
Subject: [PATCH 599/869] softlockup: minor cleanup, don't check task->state
 twice

The recent commit 16d9679f33caf7e683471647d1472bfe133d858 changed
check_hung_task() to filter out the TASK_KILLABLE tasks. We can
move this check to the caller which has to test t->state anyway.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/softlockup.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/kernel/softlockup.c b/kernel/softlockup.c
index 1a07f8ca4b9..cb838ee93a8 100644
--- a/kernel/softlockup.c
+++ b/kernel/softlockup.c
@@ -180,10 +180,6 @@ static void check_hung_task(struct task_struct *t, unsigned long now)
 	if (t->flags & PF_FROZEN)
 		return;
 
-	/* Don't check for tasks waiting on network file systems like NFS */
-	if (t->state & TASK_KILLABLE)
-		return;
-
 	if (switch_count != t->last_switch_count || !t->last_switch_timestamp) {
 		t->last_switch_count = switch_count;
 		t->last_switch_timestamp = now;
@@ -237,7 +233,8 @@ static void check_hung_uninterruptible_tasks(int this_cpu)
 	do_each_thread(g, t) {
 		if (!--max_count)
 			goto unlock;
-		if (t->state & TASK_UNINTERRUPTIBLE)
+		/* use "==" to skip the TASK_KILLABLE tasks waiting on NFS */
+		if (t->state == TASK_UNINTERRUPTIBLE)
 			check_hung_task(t, now);
 	} while_each_thread(g, t);
  unlock:
-- 
GitLab


From 2ecbf813d5e6361eb7c7520a6f5e6afa168df39a Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 2 Sep 2008 03:43:27 +1000
Subject: [PATCH 600/869] fix typo in arch/parisc/hpux/fs.c

A parisc allmodconfig build produces this:

arch/parisc/hpux/fs.c:107: error: 'buffer' undeclared (first use in this function)

Introduced by commit da574983de9f9283ba35662c8723627096e160de ("[PATCH]
fix hpux_getdents()").

Helge Dille also reported this in bugzilla 11461:

	http://bugzilla.kernel.org/show_bug.cgi?id=11461

and he posted an identical patch.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/parisc/hpux/fs.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/parisc/hpux/fs.c b/arch/parisc/hpux/fs.c
index 69ff671498e..12c04c5e558 100644
--- a/arch/parisc/hpux/fs.c
+++ b/arch/parisc/hpux/fs.c
@@ -104,7 +104,7 @@ static int filldir(void * __buf, const char * name, int namlen, loff_t offset,
 	buf->count -= reclen;
 	return 0;
 Efault:
-	buffer->error = -EFAULT;
+	buf->error = -EFAULT;
 	return -EFAULT;
 }
 
-- 
GitLab


From 1136cf11066a32d4ac2a476dac302858d763703d Mon Sep 17 00:00:00 2001
From: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Date: Mon, 1 Sep 2008 20:27:02 +0200
Subject: [PATCH 601/869] m68k: atari_keyb_init operator precedence fix

Fix operator precedence bug in atari_keyb_init, which caused a failure on CT60

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/m68k/atari/atakeyb.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/m68k/atari/atakeyb.c b/arch/m68k/atari/atakeyb.c
index 8a2a53b3361..bb959fbab2d 100644
--- a/arch/m68k/atari/atakeyb.c
+++ b/arch/m68k/atari/atakeyb.c
@@ -580,13 +580,15 @@ int atari_keyb_init(void)
 	do {
 		/* reset IKBD ACIA */
 		acia.key_ctrl = ACIA_RESET |
-				(atari_switches & ATARI_SWITCH_IKBD) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_IKBD) ?
+				 ACIA_RHTID : 0);
 		(void)acia.key_ctrl;
 		(void)acia.key_data;
 
 		/* reset MIDI ACIA */
 		acia.mid_ctrl = ACIA_RESET |
-				(atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_MIDI) ?
+				 ACIA_RHTID : 0);
 		(void)acia.mid_ctrl;
 		(void)acia.mid_data;
 
@@ -599,7 +601,8 @@ int atari_keyb_init(void)
 				 ACIA_RHTID : ACIA_RLTID);
 
 		acia.mid_ctrl = ACIA_DIV16 | ACIA_D8N1S |
-				(atari_switches & ATARI_SWITCH_MIDI) ? ACIA_RHTID : 0;
+				((atari_switches & ATARI_SWITCH_MIDI) ?
+				 ACIA_RHTID : 0);
 
 	/* make sure the interrupt line is up */
 	} while ((mfp.par_dt_reg & 0x10) == 0);
-- 
GitLab


From 3df8a905ed09341041a3d1c6309fdb18cc809297 Mon Sep 17 00:00:00 2001
From: Dennis Jansen <dennis.jansen@web.de>
Date: Fri, 15 Aug 2008 01:28:57 +0200
Subject: [PATCH 602/869] ACPI: Fix typo in "Disable MWAIT via DMI on broken
 Compal board"

This fixes a typo in commit 2a2a64714d9c40f7705c4de1e79a5b855c7211a9 "Disable MWAIT via DMI on broken Compal board".

It allows the nomwait dmi check to actually detect the Acer 5220.

Signed-off-by: Dennis Jansen <dennis.jansen@web.de>
Tested-by: Dennis Jansen <dennis.jansen@web.de>
Acked-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/acpi/processor_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index d3f0a62efcc..ee68ac54c0d 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -138,7 +138,7 @@ static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = {
 	{
 	set_no_mwait, "Extensa 5220", {
 	DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"),
-	DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+	DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
 	DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
 	DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL},
 	{},
-- 
GitLab


From 7ed77e804650b9095f862a0cfeecaa955224a73e Mon Sep 17 00:00:00 2001
From: Arjan van de Ven <arjan@infradead.org>
Date: Mon, 1 Sep 2008 15:09:51 -0700
Subject: [PATCH 603/869] don't diff generated firmware files

With the new firmware infrastructure in 2.6.27, some files are generated and shouldn't be
diffed; add these 2 to the "dontdiff" file

Signed-off-by: Arjan van de Ven <arjan@Linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/dontdiff | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 881e6dd03ae..27809357da5 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -5,6 +5,8 @@
 *.css
 *.dvi
 *.eps
+*.fw.gen.S
+*.fw
 *.gif
 *.grep
 *.grp
-- 
GitLab


From 71fc9fcc70e6ad96215510c1dbcbade05cd95e41 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 2 Sep 2008 20:18:46 +0200
Subject: [PATCH 604/869] IDE: compile fix for sff_dma_ops

The sff_dma_ops struct should be wrapped by BLK_DEV_IDEDMA_SFF instead
of BLK_DEV_IDEDMA_PCI.

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/linux/ide.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/ide.h b/include/linux/ide.h
index 87c12ed9695..fee4b157c53 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1111,7 +1111,6 @@ void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *);
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
 int ide_pci_set_master(struct pci_dev *, const char *);
 unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *);
-extern const struct ide_dma_ops sff_dma_ops;
 int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *);
 int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *);
 #else
@@ -1275,6 +1274,7 @@ extern int __ide_dma_end(ide_drive_t *);
 int ide_dma_test_irq(ide_drive_t *);
 extern void ide_dma_lost_irq(ide_drive_t *);
 extern void ide_dma_timeout(ide_drive_t *);
+extern const struct ide_dma_ops sff_dma_ops;
 #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */
 
 #else
-- 
GitLab


From a1aee8622293138867e7dbd1dd214dfb34cd89d2 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khilman@deeprootsystems.com>
Date: Tue, 2 Sep 2008 20:18:47 +0200
Subject: [PATCH 605/869] IDE: palm_bk3710: fix compile warning for unused
 variable

Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/palm_bk3710.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index f788fa5a977..581a7d1cc50 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -347,7 +347,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct resource *mem, *irq;
-	struct ide_host *host;
 	unsigned long base, rate;
 	int i, rc;
 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-- 
GitLab


From 96f80219b738f84f90e449385bdede90f2910521 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 2 Sep 2008 20:18:47 +0200
Subject: [PATCH 606/869] ide: fix hwif_to_node()

hwif_to_node() incorrectly assumes that hwif->dev always belongs to
a PCI device.  This results in ide-cs oopsing in init_irq() after
commit c56c5648a3bd15ff14c50f284b261140cd5b5472 accidentally fixed
device tree registration for ide-cs.  Fix it by using dev_to_node().

Thanks to Martin Michlmayr and Larry Finger for help with debugging
the issue.

Reported-by: Martin Michlmayr <tbm@cyrius.com>
Tested-by: Martin Michlmayr <tbm@cyrius.com>
Cc: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 include/linux/ide.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/include/linux/ide.h b/include/linux/ide.h
index fee4b157c53..1524829f73f 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1448,8 +1448,7 @@ static inline void ide_dump_identify(u8 *id)
 
 static inline int hwif_to_node(ide_hwif_t *hwif)
 {
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	return hwif->dev ? pcibus_to_node(dev->bus) : -1;
+	return hwif->dev ? dev_to_node(hwif->dev) : -1;
 }
 
 static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive)
-- 
GitLab


From bfc2f01fc83f982344f09f491f7c18a6b9a16aa8 Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Tue, 2 Sep 2008 20:18:47 +0200
Subject: [PATCH 607/869] palm_bk3710: improve IDE registration

* fix device tree ... don't forget to set the parent device

* let init/exit code be removed where practical

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
[bart: splitted it from bigger DaVinci patch, s/hw.parent/hw.dev/]
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/arm/palm_bk3710.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 581a7d1cc50..4fd91dcf1dc 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -343,7 +343,7 @@ static struct ide_port_info __devinitdata palm_bk3710_port_info = {
 	.mwdma_mask		= ATA_MWDMA2,
 };
 
-static int __devinit palm_bk3710_probe(struct platform_device *pdev)
+static int __init palm_bk3710_probe(struct platform_device *pdev)
 {
 	struct clk *clk;
 	struct resource *mem, *irq;
@@ -389,6 +389,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev)
 		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
 	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
 	hw.irq = irq->start;
+	hw.dev = &pdev->dev;
 	hw.chipset = ide_palm3710;
 
 	palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
@@ -412,13 +413,11 @@ static struct platform_driver platform_bk_driver = {
 		.name = "palm_bk3710",
 		.owner = THIS_MODULE,
 	},
-	.probe = palm_bk3710_probe,
-	.remove = NULL,
 };
 
 static int __init palm_bk3710_init(void)
 {
-	return platform_driver_register(&platform_bk_driver);
+	return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
 }
 
 module_init(palm_bk3710_init);
-- 
GitLab


From ab1b67a6230648cf65b0342d9887fee890160ca8 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 2 Sep 2008 20:18:47 +0200
Subject: [PATCH 608/869] ide-disk: remove stale init_idedisk_capacity()
 documentation

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/ide-disk.c | 14 --------------
 1 file changed, 14 deletions(-)

diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 68b9cf0138b..07ef88bd109 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -445,20 +445,6 @@ static void idedisk_check_hpa(ide_drive_t *drive)
 	}
 }
 
-/*
- * Compute drive->capacity, the full capacity of the drive
- * Called with drive->id != NULL.
- *
- * To compute capacity, this uses either of
- *
- *    1. CHS value set by user       (whatever user sets will be trusted)
- *    2. LBA value from target drive (require new ATA feature)
- *    3. LBA value from system BIOS  (new one is OK, old one may break)
- *    4. CHS value from system BIOS  (traditional style)
- *
- * in above order (i.e., if value of higher priority is available,
- * reset will be ignored).
- */
 static void init_idedisk_capacity(ide_drive_t *drive)
 {
 	struct hd_driveid *id = drive->id;
-- 
GitLab


From 5a61dd9ec8c5a8e14fbccda3ab042555b692b9b2 Mon Sep 17 00:00:00 2001
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Tue, 2 Sep 2008 20:18:48 +0200
Subject: [PATCH 609/869] ide/Kconfig: mark ide-scsi as deprecated

Mark ide-scsi as deprecated and remove stale/bogus documentation.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/Kconfig | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index a34758d2951..fc735ab08ff 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -242,7 +242,7 @@ config BLK_DEV_IDEFLOPPY
 	  module will be called ide-floppy.
 
 config BLK_DEV_IDESCSI
-	tristate "SCSI emulation support"
+	tristate "SCSI emulation support (DEPRECATED)"
 	depends on SCSI
 	select IDE_ATAPI
 	---help---
@@ -255,20 +255,6 @@ config BLK_DEV_IDESCSI
 	  and will allow you to use a SCSI device driver instead of a native
 	  ATAPI driver.
 
-	  This is useful if you have an ATAPI device for which no native
-	  driver has been written (for example, an ATAPI PD-CD drive);
-	  you can then use this emulation together with an appropriate SCSI
-	  device driver. In order to do this, say Y here and to "SCSI support"
-	  and "SCSI generic support", below. You must then provide the kernel
-	  command line "hdx=ide-scsi" (try "man bootparam" or see the
-	  documentation of your boot loader (lilo or loadlin) about how to
-	  pass options to the kernel at boot time) for devices if you want the
-	  native EIDE sub-drivers to skip over the native support, so that
-	  this SCSI emulation can be used instead.
-
-	  Note that this option does NOT allow you to attach SCSI devices to a
-	  box that doesn't have a SCSI host adapter installed.
-
 	  If both this SCSI emulation and native ATAPI support are compiled
 	  into the kernel, the native support will be used.
 
-- 
GitLab


From d9664741e0e2216770d6e52646474d3982b8eb55 Mon Sep 17 00:00:00 2001
From: Florian Mickler <florian@mickler.org>
Date: Tue, 2 Sep 2008 15:26:34 +0200
Subject: [PATCH 610/869] net/wireless/Kconfig: clarify the description for
 CONFIG_WIRELESS_EXT_SYSFS

Current setup with hal and NetworkManager will fail to work
without newest hal version with this config option disabled.

Although this will solve itself by time, at the moment it is
dishonest to say that we don't know any software that uses it,
if there are many many people relying on old hal versions.

Signed-off-by: Florian Mickler <florian@mickler.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/wireless/Kconfig | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index ab015c62d56..833b024f8f6 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -39,4 +39,5 @@ config WIRELESS_EXT_SYSFS
 	  files in /sys/class/net/*/wireless/. The same information
 	  is available via the ioctls as well.
 
-	  Say Y if you have programs using it (we don't know of any).
+	  Say Y if you have programs using it, like old versions of
+	  hal.
-- 
GitLab


From 49898852e6aa8a6de9a5bc0bab2cf305b3583bbf Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Tue, 2 Sep 2008 15:07:18 -0400
Subject: [PATCH 611/869] iwlwifi: do not use GFP_DMA in iwl_tx_queue_init

GFP_DMA is not necessary for the iwlwifi hardware and it can cause
allocation failures and/or invoke the OOM killer on lots of systems.

For reference:

	https://bugzilla.redhat.com/show_bug.cgi?id=459709

Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-tx.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index d82823b5c8a..ff879d46624 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -426,7 +426,7 @@ static int iwl_tx_queue_init(struct iwl_priv *priv,
 				continue;
 		}
 
-		txq->cmd[i] = kmalloc(len, GFP_KERNEL | GFP_DMA);
+		txq->cmd[i] = kmalloc(len, GFP_KERNEL);
 		if (!txq->cmd[i])
 			return -ENOMEM;
 	}
-- 
GitLab


From cf88c433bf64b6f7395a39f840bec88a8c58b58b Mon Sep 17 00:00:00 2001
From: Tomas Winkler <tomas.winkler@intel.com>
Date: Thu, 28 Aug 2008 17:25:04 +0800
Subject: [PATCH 612/869] iwlwifi: workaround interrupt handling no some
 platforms

This patch adds workaround for an interrupt related hardware bug on
some platforms.  (Apparently these platforms boot-up w/ INTX_DISABLED
set. -- JWL)

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 061ffba9c88..c0b73c4d6f4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2602,6 +2602,7 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw)
 {
 	struct iwl_priv *priv = hw->priv;
 	int ret;
+	u16 pci_cmd;
 
 	IWL_DEBUG_MAC80211("enter\n");
 
@@ -2612,6 +2613,13 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw)
 	pci_restore_state(priv->pci_dev);
 	pci_enable_msi(priv->pci_dev);
 
+	/* enable interrupts if needed: hw bug w/a */
+	pci_read_config_word(priv->pci_dev, PCI_COMMAND, &pci_cmd);
+	if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
+		pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
+		pci_write_config_word(priv->pci_dev, PCI_COMMAND, pci_cmd);
+	}
+
 	ret = request_irq(priv->pci_dev->irq, iwl4965_isr, IRQF_SHARED,
 			  DRV_NAME, priv);
 	if (ret) {
-- 
GitLab


From 1d3e6c61342292140dfe1b921991ee793ec1e0ae Mon Sep 17 00:00:00 2001
From: Mohamed Abbas <mohamed.abbas@intel.com>
Date: Thu, 28 Aug 2008 17:25:05 +0800
Subject: [PATCH 613/869] iwlwifi: fix apm_stop (wrong bit polarity for
 FLAG_INIT_DONE)

The patch fixes CSR_GP_CNTRL_REG_FLAG_INIT_DONE was set instead of
cleared which disabled moving device to D0U state.

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-4965.c | 4 ++--
 drivers/net/wireless/iwlwifi/iwl-5000.c | 3 ++-
 2 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index e2581229d8b..23fed329896 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -474,8 +474,8 @@ static void iwl4965_apm_stop(struct iwl_priv *priv)
 	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
 
 	udelay(10);
-
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+	/* clear "init complete"  move adapter D0A* --> D0U state */
+	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index cbc01a00eaf..d95fb42b2bd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -145,7 +145,8 @@ static void iwl5000_apm_stop(struct iwl_priv *priv)
 
 	udelay(10);
 
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+	/* clear "init complete"  move adapter D0A* --> D0U state */
+	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
-- 
GitLab


From f0b9f5cb4adcec9424142592ca7bf024fe6c91a9 Mon Sep 17 00:00:00 2001
From: Tomas Winkler <tomas.winkler@intel.com>
Date: Thu, 28 Aug 2008 17:25:10 +0800
Subject: [PATCH 614/869] iwlwifi: fix 64bit platform firmware loading

This patch fixes loading firmware from memory above 32bit.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Acked-by: Marcel Holtmann <holtmann@linux.intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-5000.c | 11 ++++-------
 drivers/net/wireless/iwlwifi/iwl-fh.h   |  1 +
 2 files changed, 5 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index d95fb42b2bd..b08036a9d89 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -578,14 +578,11 @@ static int iwl5000_load_section(struct iwl_priv *priv,
 		FH_TFDIB_CTRL0_REG(FH_SRVC_CHNL),
 		phy_addr & FH_MEM_TFDIB_DRAM_ADDR_LSB_MSK);
 
-	/* FIME: write the MSB of the phy_addr in CTRL1
-	 * iwl_write_direct32(priv,
-		IWL_FH_TFDIB_CTRL1_REG(IWL_FH_SRVC_CHNL),
-		((phy_addr & MSB_MSK)
-			<< FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_count);
-	 */
 	iwl_write_direct32(priv,
-		FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL), byte_cnt);
+		FH_TFDIB_CTRL1_REG(FH_SRVC_CHNL),
+		(iwl_get_dma_hi_address(phy_addr)
+			<< FH_MEM_TFDIB_REG1_ADDR_BITSHIFT) | byte_cnt);
+
 	iwl_write_direct32(priv,
 		FH_TCSR_CHNL_TX_BUF_STS_REG(FH_SRVC_CHNL),
 		1 << FH_TCSR_CHNL_TX_BUF_STS_REG_POS_TB_NUM |
diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h
index 944642450d3..cd11c0ca299 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fh.h
@@ -287,6 +287,7 @@
 
 #define FH_RSSR_CHNL0_RX_STATUS_CHNL_IDLE	(0x01000000)
 
+#define FH_MEM_TFDIB_REG1_ADDR_BITSHIFT	28
 
 /**
  * Transmit DMA Channel Control/Status Registers (TCSR)
-- 
GitLab


From 667d41008eb8a0e1d495d6c0a6143b43fe587c98 Mon Sep 17 00:00:00 2001
From: David Kilroy <kilroyd@gmail.com>
Date: Sat, 23 Aug 2008 19:03:34 +0100
Subject: [PATCH 615/869] orinoco: Multicast to the specified addresses

When multicasting the driver sets the number of group addresses using
the count from the previous set multicast command. In general this means
you have to set the multicast addresses twice to get the behaviour you
want.

If we were multicasting, and reduce the number of addresses we are
multicasting to, then the driver would write uninitialised data from the
stack into the group addresses to multicast to.

Only write the multicast addresses we have specifically set.

Signed-off-by: David Kilroy <kilroyd@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/orinoco.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 1ebcafe7ca5..36c004e1560 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -1970,6 +1970,9 @@ __orinoco_set_multicast_list(struct net_device *dev)
 			priv->promiscuous = promisc;
 	}
 
+	/* If we're not in promiscuous mode, then we need to set the
+	 * group address if either we want to multicast, or if we were
+	 * multicasting and want to stop */
 	if (! promisc && (mc_count || priv->mc_count) ) {
 		struct dev_mc_list *p = dev->mc_list;
 		struct hermes_multicast mclist;
@@ -1989,9 +1992,10 @@ __orinoco_set_multicast_list(struct net_device *dev)
 			printk(KERN_WARNING "%s: Multicast list is "
 			       "longer than mc_count\n", dev->name);
 
-		err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
-				       HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
-				       &mclist);
+		err = hermes_write_ltv(hw, USER_BAP,
+				   HERMES_RID_CNFGROUPADDRESSES,
+				   HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN),
+				   &mclist);
 		if (err)
 			printk(KERN_ERR "%s: Error %d setting multicast list.\n",
 			       dev->name, err);
-- 
GitLab


From 9a52028e534b0567913a4144060e774891c00a37 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Thu, 28 Aug 2008 01:05:08 +0300
Subject: [PATCH 616/869] wireless/libertas/if_cs.c: fix memory leaks

The leak in if_cs_prog_helper() is obvious.

It looks a bit as if not freeing "fw" in if_cs_prog_real() was done
intentionally, but I'm not seeing why it shouldn't be freed.

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/libertas/if_cs.c | 13 +++----------
 1 file changed, 3 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 04d7a251e3f..8941919001b 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -595,7 +595,7 @@ static int if_cs_prog_helper(struct if_cs_card *card)
 		if (ret < 0) {
 			lbs_pr_err("can't download helper at 0x%x, ret %d\n",
 				sent, ret);
-			goto done;
+			goto err_release;
 		}
 
 		if (count == 0)
@@ -604,9 +604,8 @@ static int if_cs_prog_helper(struct if_cs_card *card)
 		sent += count;
 	}
 
+err_release:
 	release_firmware(fw);
-	ret = 0;
-
 done:
 	lbs_deb_leave_args(LBS_DEB_CS, "ret %d", ret);
 	return ret;
@@ -676,14 +675,8 @@ static int if_cs_prog_real(struct if_cs_card *card)
 	}
 
 	ret = if_cs_poll_while_fw_download(card, IF_CS_SCRATCH, 0x5a);
-	if (ret < 0) {
+	if (ret < 0)
 		lbs_pr_err("firmware download failed\n");
-		goto err_release;
-	}
-
-	ret = 0;
-	goto done;
-
 
 err_release:
 	release_firmware(fw);
-- 
GitLab


From 2b58b209399844995ad48e421267e359e16c03db Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Thu, 28 Aug 2008 15:12:06 +0300
Subject: [PATCH 617/869] mac80211: Fix debugfs union misuse and pointer
 corruption

debugfs union in struct ieee80211_sub_if_data is misused by including a
common default_key dentry as a union member. This ends occupying the same
memory area with the first dentry in other union members (structures;
usually drop_unencrypted). Consequently, debugfs operations on
default_key symlinks and drop_unencrypted entry are using the same
dentry pointer even though they are supposed to be separate ones. This
can lead to removing entries incorrectly or potentially leaving
something behind since one of the dentry pointers gets lost.

Fix this by moving the default_key dentry to a new struct
(common_debugfs) that contains dentries (more to be added in future)
that are shared by all vif types. The debugfs union must only be used
for vif type-specific entries to avoid this type of pointer corruption.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 net/mac80211/debugfs_key.c | 6 +++---
 net/mac80211/ieee80211_i.h | 4 +++-
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index 7439b63df5d..cf82acec913 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -265,7 +265,7 @@ void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata)
 	key = sdata->default_key;
 	if (key) {
 		sprintf(buf, "../keys/%d", key->debugfs.cnt);
-		sdata->debugfs.default_key =
+		sdata->common_debugfs.default_key =
 			debugfs_create_symlink("default_key",
 					       sdata->debugfsdir, buf);
 	} else
@@ -277,8 +277,8 @@ void ieee80211_debugfs_key_remove_default(struct ieee80211_sub_if_data *sdata)
 	if (!sdata)
 		return;
 
-	debugfs_remove(sdata->debugfs.default_key);
-	sdata->debugfs.default_key = NULL;
+	debugfs_remove(sdata->common_debugfs.default_key);
+	sdata->common_debugfs.default_key = NULL;
 }
 
 void ieee80211_debugfs_key_sta_del(struct ieee80211_key *key,
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 586a9b49b0f..4498d871365 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -496,8 +496,10 @@ struct ieee80211_sub_if_data {
 		struct {
 			struct dentry *mode;
 		} monitor;
-		struct dentry *default_key;
 	} debugfs;
+	struct {
+		struct dentry *default_key;
+	} common_debugfs;
 
 #ifdef CONFIG_MAC80211_MESH
 	struct dentry *mesh_stats_dir;
-- 
GitLab


From 445df54fec7c1924f44018c4db2a9613b877f10e Mon Sep 17 00:00:00 2001
From: Boaz Harrosh <bharrosh@panasas.com>
Date: Mon, 1 Sep 2008 14:47:19 +0300
Subject: [PATCH 618/869] rt2x00: Compiler warning unmasked by fix of
 BUILD_BUG_ON

A "Set" to a sign-bit in an "&" operation causes a compiler warning.
Make calculations unsigned.

[ The warning was masked by the old definition of BUILD_BUG_ON() ]

Also remove __builtin_constant_p from FIELD_CHECK since BUILD_BUG_ON
no longer permits non-const values.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
CC: Ingo Molnar <mingo@elte.hu>
CC: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/rt2x00/rt2x00reg.h | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
index 7e88ce5651b..2ea7866abd5 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -136,7 +136,7 @@ struct rt2x00_field32 {
  */
 #define is_power_of_two(x)	( !((x) & ((x)-1)) )
 #define low_bit_mask(x)		( ((x)-1) & ~(x) )
-#define is_valid_mask(x)	is_power_of_two(1 + (x) + low_bit_mask(x))
+#define is_valid_mask(x)	is_power_of_two(1LU + (x) + low_bit_mask(x))
 
 /*
  * Macro's to find first set bit in a variable.
@@ -173,8 +173,7 @@ struct rt2x00_field32 {
  * does not exceed the given typelimit.
  */
 #define FIELD_CHECK(__mask, __type)			\
-	BUILD_BUG_ON(!__builtin_constant_p(__mask) ||	\
-		     !(__mask) ||			\
+	BUILD_BUG_ON(!(__mask) ||			\
 		     !is_valid_mask(__mask) ||		\
 		     (__mask) != (__type)(__mask))	\
 
-- 
GitLab


From 1b96175b7e5801a908718d8b5270a4f7d94fed28 Mon Sep 17 00:00:00 2001
From: Senthil Balasubramanian <senthilkumar@atheros.com>
Date: Mon, 1 Sep 2008 19:45:21 +0530
Subject: [PATCH 619/869] ath9k: Incorrect key used when group and pairwise
 ciphers are different.

Updating sc_keytype multiple times when groupwise and pairwise
ciphers are different results in incorrect pairwise key type
assumed for TX control and normal ping fails. This works fine
for cases where both groupwise and pairwise ciphers are same.

Also use mac80211 provided enums for key length calculation.

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/hw.c   | 8 ++++----
 drivers/net/wireless/ath9k/main.c | 6 ++++--
 2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/ath9k/hw.c b/drivers/net/wireless/ath9k/hw.c
index a17eb130f57..6dbfed0b414 100644
--- a/drivers/net/wireless/ath9k/hw.c
+++ b/drivers/net/wireless/ath9k/hw.c
@@ -7285,15 +7285,15 @@ ath9k_hw_set_keycache_entry(struct ath_hal *ah, u16 entry,
 		}
 		break;
 	case ATH9K_CIPHER_WEP:
-		if (k->kv_len < 40 / NBBY) {
+		if (k->kv_len < LEN_WEP40) {
 			DPRINTF(ah->ah_sc, ATH_DBG_KEYCACHE,
 				 "%s: WEP key length %u too small\n",
 				 __func__, k->kv_len);
 			return false;
 		}
-		if (k->kv_len <= 40 / NBBY)
+		if (k->kv_len <= LEN_WEP40)
 			keyType = AR_KEYTABLE_TYPE_40;
-		else if (k->kv_len <= 104 / NBBY)
+		else if (k->kv_len <= LEN_WEP104)
 			keyType = AR_KEYTABLE_TYPE_104;
 		else
 			keyType = AR_KEYTABLE_TYPE_128;
@@ -7313,7 +7313,7 @@ ath9k_hw_set_keycache_entry(struct ath_hal *ah, u16 entry,
 	key2 = get_unaligned_le32(k->kv_val + 6) ^ xorMask;
 	key3 = (get_unaligned_le16(k->kv_val + 10) ^ xorMask) & 0xffff;
 	key4 = get_unaligned_le32(k->kv_val + 12) ^ xorMask;
-	if (k->kv_len <= 104 / NBBY)
+	if (k->kv_len <= LEN_WEP104)
 		key4 &= 0xff;
 
 	if (keyType == AR_KEYTABLE_TYPE_TKIP && ATH9K_IS_MIC_ENABLED(ah)) {
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 2888778040e..95b33714948 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -206,7 +206,8 @@ static int ath_key_config(struct ath_softc *sc,
 	if (!ret)
 		return -EIO;
 
-	sc->sc_keytype = hk.kv_type;
+	if (mac)
+		sc->sc_keytype = hk.kv_type;
 	return 0;
 }
 
@@ -756,7 +757,8 @@ static int ath9k_set_key(struct ieee80211_hw *hw,
 			key->hw_key_idx = key->keyidx;
 			/* push IV and Michael MIC generation to stack */
 			key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
-			key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
+			if (key->alg == ALG_TKIP)
+				key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
 		}
 		break;
 	case DISABLE_KEY:
-- 
GitLab


From 773b4e02be28220e9ead80a5fdb180031361439a Mon Sep 17 00:00:00 2001
From: Senthil Balasubramanian <senthilkumar@atheros.com>
Date: Mon, 1 Sep 2008 19:58:20 +0530
Subject: [PATCH 620/869] ath9: Fix ath_rx_flush_tid() for IRQs disabled kernel
 warning message.

This patch addresses an issue with the locking order. ath_rx_flush_tid()
uses spin_lock/unlock_bh when IRQs are disabled in sta_notify by mac80211.

As node clean up is still pending with ath9k and this problematic portion
of the code is expected to change anyway, thinking of a proper fix may not
be worthwhile. So having this interim fix helps the users to get rid of the
kernel warning message.

Pasted the kernel warning message for reference.

kernel: ath0: No ProbeResp from current AP 00:1b:11:60:7a:3d - assume out of range
kernel: ------------[ cut here ]------------
kernel: WARNING: at kernel/softirq.c:136 local_bh_enable+0x3c/0xab()
kernel: Pid: 1029, comm: ath9k Not tainted 2.6.27-rc4-wt-w1fi-wl
kernel:
kernel: Call Trace:
kernel:  [<ffffffff802278d8>] warn_on_slowpath+0x51/0x77
kernel:  [<ffffffff80224c51>] check_preempt_wakeup+0xf3/0x123
kernel:  [<ffffffff80239658>] autoremove_wake_function+0x9/0x2e
kernel:  [<ffffffff8022c281>] local_bh_enable+0x3c/0xab
kernel:  [<ffffffffa01ab75a>] ath_rx_node_cleanup+0x38/0x6e [ath9k]
kernel:  [<ffffffffa01b2280>] ath_node_detach+0x3b/0xb6 [ath9k]
kernel:  [<ffffffffa01ab09f>] ath9k_sta_notify+0x12b/0x165 [ath9k]
kernel:  [<ffffffff802366cf>] queue_work+0x1d/0x49
kernel:  [<ffffffffa018c3fc>] add_todo+0x70/0x99 [mac80211]
kernel:  [<ffffffffa017de76>] __sta_info_unlink+0x16b/0x19e [mac80211]
kernel:  [<ffffffffa017e6ed>] sta_info_unlink+0x18/0x43 [mac80211]
kernel:  [<ffffffffa0182732>] ieee80211_associated+0xaa/0x16d [mac80211]
kernel:  [<ffffffffa0184a1a>] ieee80211_sta_work+0x4fb/0x6b4 [mac80211]
kernel:  [<ffffffff80469c58>] thread_return+0x30/0xa9
kernel:  [<ffffffffa018451f>] ieee80211_sta_work+0x0/0x6b4 [mac80211]
kernel:  [<ffffffff802362c2>] run_workqueue+0xb1/0x17a
kernel:  [<ffffffff80236be9>] worker_thread+0xd0/0xdb
kernel:  [<ffffffff8023964f>] autoremove_wake_function+0x0/0x2e
kernel:  [<ffffffff80236b19>] worker_thread+0x0/0xdb
kernel:  [<ffffffff8023954a>] kthread+0x47/0x75
kernel:  [<ffffffff80223121>] schedule_tail+0x18/0x50
kernel:  [<ffffffff8020bc49>] child_rip+0xa/0x11
kernel:  [<ffffffff80239503>] kthread+0x0/0x75
kernel:  [<ffffffff8020bc3f>] child_rip+0x0/0x11
kernel:
kernel: ---[ end trace e9bb5da661055827 ]---

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/recv.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
index 2fe806175c0..20ddb7acdb9 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -360,8 +360,9 @@ static void ath_rx_flush_tid(struct ath_softc *sc,
 	struct ath_arx_tid *rxtid, int drop)
 {
 	struct ath_rxbuf *rxbuf;
+	unsigned long flag;
 
-	spin_lock_bh(&rxtid->tidlock);
+	spin_lock_irqsave(&rxtid->tidlock, flag);
 	while (rxtid->baw_head != rxtid->baw_tail) {
 		rxbuf = rxtid->rxbuf + rxtid->baw_head;
 		if (!rxbuf->rx_wbuf) {
@@ -382,7 +383,7 @@ static void ath_rx_flush_tid(struct ath_softc *sc,
 		INCR(rxtid->baw_head, ATH_TID_MAX_BUFS);
 		INCR(rxtid->seq_next, IEEE80211_SEQ_MAX);
 	}
-	spin_unlock_bh(&rxtid->tidlock);
+	spin_unlock_irqrestore(&rxtid->tidlock, flag);
 }
 
 static struct sk_buff *ath_rxbuf_alloc(struct ath_softc *sc,
-- 
GitLab


From 9d7d74029e0f5fde3b88b39892b9b9cfdf4ea10a Mon Sep 17 00:00:00 2001
From: Julien Brunel <brunel@diku.dk>
Date: Tue, 2 Sep 2008 17:24:28 -0700
Subject: [PATCH 621/869] net/xfrm: Use an IS_ERR test rather than a NULL test

In case of error, the function xfrm_bundle_create returns an ERR
pointer, but never returns a NULL pointer. So a NULL test that comes
after an IS_ERR test should be deleted.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@match_bad_null_test@
expression x, E;
statement S1,S2;
@@
x =  xfrm_bundle_create(...)
... when != x = E
*  if (x != NULL)
S1 else S2
// </smpl>

Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/xfrm/xfrm_policy.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 841b32a2e68..46914b79d85 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1731,8 +1731,7 @@ restart:
 			 * We can't enlist stable bundles either.
 			 */
 			write_unlock_bh(&policy->lock);
-			if (dst)
-				dst_free(dst);
+			dst_free(dst);
 
 			if (pol_dead)
 				XFRM_INC_STATS(LINUX_MIB_XFRMOUTPOLDEAD);
@@ -1748,8 +1747,7 @@ restart:
 			err = xfrm_dst_update_origin(dst, fl);
 		if (unlikely(err)) {
 			write_unlock_bh(&policy->lock);
-			if (dst)
-				dst_free(dst);
+			dst_free(dst);
 			XFRM_INC_STATS(LINUX_MIB_XFRMOUTBUNDLECHECKERROR);
 			goto error;
 		}
-- 
GitLab


From 06770843c2f0f929a6e0c758dc433902a01aabfb Mon Sep 17 00:00:00 2001
From: Breno Leitao <leitao@linux.vnet.ibm.com>
Date: Tue, 2 Sep 2008 17:28:58 -0700
Subject: [PATCH 622/869] ipv: Re-enable IP when MTU > 68

Re-enable IP when the MTU gets back to a valid size.

This patch just checks if the in_dev is NULL on a NETDEV_CHANGEMTU event
and if MTU is valid (bigger than 68), then re-enable in_dev.

Also a function that checks valid MTU size was created.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/ipv4/devinet.c | 15 ++++++++++++---
 1 file changed, 12 insertions(+), 3 deletions(-)

diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 91d3d96805d..b12dae2b0b2 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1029,6 +1029,11 @@ skip:
 	}
 }
 
+static inline bool inetdev_valid_mtu(unsigned mtu)
+{
+	return mtu >= 68;
+}
+
 /* Called only under RTNL semaphore */
 
 static int inetdev_event(struct notifier_block *this, unsigned long event,
@@ -1048,6 +1053,10 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 				IN_DEV_CONF_SET(in_dev, NOXFRM, 1);
 				IN_DEV_CONF_SET(in_dev, NOPOLICY, 1);
 			}
+		} else if (event == NETDEV_CHANGEMTU) {
+			/* Re-enabling IP */
+			if (inetdev_valid_mtu(dev->mtu))
+				in_dev = inetdev_init(dev);
 		}
 		goto out;
 	}
@@ -1058,7 +1067,7 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 		dev->ip_ptr = NULL;
 		break;
 	case NETDEV_UP:
-		if (dev->mtu < 68)
+		if (!inetdev_valid_mtu(dev->mtu))
 			break;
 		if (dev->flags & IFF_LOOPBACK) {
 			struct in_ifaddr *ifa;
@@ -1080,9 +1089,9 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 		ip_mc_down(in_dev);
 		break;
 	case NETDEV_CHANGEMTU:
-		if (dev->mtu >= 68)
+		if (inetdev_valid_mtu(dev->mtu))
 			break;
-		/* MTU falled under 68, disable IP */
+		/* disable IP when MTU is not enough */
 	case NETDEV_UNREGISTER:
 		inetdev_destroy(in_dev);
 		break;
-- 
GitLab


From 169ccbd44eb20f5bb7e4352451eba25397e29749 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Tue, 2 Sep 2008 14:35:37 -0700
Subject: [PATCH 623/869] NTFS: update homepage

Update the location of the NTFS homepage in several files.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/ntfs.txt | 4 ++--
 MAINTAINERS                        | 2 +-
 fs/ntfs/usnjrnl.h                  | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt
index e79ee2db183..ac2a261c5f7 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@@ -40,7 +40,7 @@ Web site
 ========
 
 There is plenty of additional information on the linux-ntfs web site
-at http://linux-ntfs.sourceforge.net/
+at http://www.linux-ntfs.org/
 
 The web site has a lot of additional information, such as a comprehensive
 FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS
@@ -272,7 +272,7 @@ And you would know that /dev/hda2 has a size of 37768814 - 4209030 + 1 =
 For Win2k and later dynamic disks, you can for example use the ldminfo utility
 which is part of the Linux LDM tools (the latest version at the time of
 writing is linux-ldm-0.0.8.tar.bz2).  You can download it from:
-	http://linux-ntfs.sourceforge.net/downloads.html
+	http://www.linux-ntfs.org/
 Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go
 into it (cd linux-ldm-0.0.8) and change to the test directory (cd test).  You
 will find the precompiled (i386) ldminfo utility there.  NOTE: You will not be
diff --git a/MAINTAINERS b/MAINTAINERS
index c4ca99cf80d..be83f3424f3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3051,7 +3051,7 @@ P:	Anton Altaparmakov
 M:	aia21@cantab.net
 L:	linux-ntfs-dev@lists.sourceforge.net
 L:	linux-kernel@vger.kernel.org
-W:	http://linux-ntfs.sf.net/
+W:	http://www.linux-ntfs.org/
 T:	git kernel.org:/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
 S:	Maintained
 
diff --git a/fs/ntfs/usnjrnl.h b/fs/ntfs/usnjrnl.h
index 3a8af75351e..4087fbdac32 100644
--- a/fs/ntfs/usnjrnl.h
+++ b/fs/ntfs/usnjrnl.h
@@ -113,7 +113,7 @@ typedef struct {
  * Reason flags (32-bit).  Cumulative flags describing the change(s) to the
  * file since it was last opened.  I think the names speak for themselves but
  * if you disagree check out the descriptions in the Linux NTFS project NTFS
- * documentation: http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html
+ * documentation: http://www.linux-ntfs.org/
  */
 enum {
 	USN_REASON_DATA_OVERWRITE	= const_cpu_to_le32(0x00000001),
@@ -145,7 +145,7 @@ typedef le32 USN_REASON_FLAGS;
  * Source info flags (32-bit).  Information about the source of the change(s)
  * to the file.  For detailed descriptions of what these mean, see the Linux
  * NTFS project NTFS documentation:
- *	http://linux-ntfs.sourceforge.net/ntfs/files/usnjrnl.html
+ *	http://www.linux-ntfs.org/
  */
 enum {
 	USN_SOURCE_DATA_MANAGEMENT	  = const_cpu_to_le32(0x00000001),
-- 
GitLab


From 344c790e3821dac37eb742ddd0b611a300f78b9a Mon Sep 17 00:00:00 2001
From: Adam Litke <agl@us.ibm.com>
Date: Tue, 2 Sep 2008 14:35:38 -0700
Subject: [PATCH 624/869] mm: make setup_zone_migrate_reserve() aware of
 overlapping nodes

I have gotten to the root cause of the hugetlb badness I reported back on
August 15th.  My system has the following memory topology (note the
overlapping node):

            Node 0 Memory: 0x8000000-0x44000000
            Node 1 Memory: 0x0-0x8000000 0x44000000-0x80000000

setup_zone_migrate_reserve() scans the address range 0x0-0x8000000 looking
for a pageblock to move onto the MIGRATE_RESERVE list.  Finding no
candidates, it happily continues the scan into 0x8000000-0x44000000.  When
a pageblock is found, the pages are moved to the MIGRATE_RESERVE list on
the wrong zone.  Oops.

setup_zone_migrate_reserve() should skip pageblocks in overlapping nodes.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_alloc.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index af982f7cdb2..feb791648a1 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -694,6 +694,9 @@ static int move_freepages(struct zone *zone,
 #endif
 
 	for (page = start_page; page <= end_page;) {
+		/* Make sure we are not inadvertently changing nodes */
+		VM_BUG_ON(page_to_nid(page) != zone_to_nid(zone));
+
 		if (!pfn_valid_within(page_to_pfn(page))) {
 			page++;
 			continue;
@@ -2516,6 +2519,10 @@ static void setup_zone_migrate_reserve(struct zone *zone)
 			continue;
 		page = pfn_to_page(pfn);
 
+		/* Watch out for overlapping nodes */
+		if (page_to_nid(page) != zone_to_nid(zone))
+			continue;
+
 		/* Blocks with reserved pages will never free, skip them. */
 		if (PageReserved(page))
 			continue;
-- 
GitLab


From 6ccfa806a9cfbbf1cd43d5b6aa47ef2c0eb518fd Mon Sep 17 00:00:00 2001
From: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Date: Tue, 2 Sep 2008 14:35:40 -0700
Subject: [PATCH 625/869] VFS: fix dio write returning EIO when
 try_to_release_page fails

Dio write returns EIO when try_to_release_page fails because bh is
still referenced.

The patch

    commit 3f31fddfa26b7594b44ff2b34f9a04ba409e0f91
    Author: Mingming Cao <cmm@us.ibm.com>
    Date:   Fri Jul 25 01:46:22 2008 -0700

        jbd: fix race between free buffer and commit transaction

was merged into 2.6.27-rc1, but I noticed that this patch is not enough
to fix the race.

I did fsstress test heavily to 2.6.27-rc1, and found that dio write still
sometimes got EIO through this test.

The patch above fixed race between freeing buffer(dio) and committing
transaction(jbd) but I discovered that there is another race, freeing
buffer(dio) and ext3/4_ordered_writepage.

: background_writeout()
     ->write_cache_pages()
       ->ext3_ordered_writepage()
     	   walk_page_buffers() -> take a bh ref
 	   block_write_full_page() -> unlock_page
		: <- end_page_writeback
                : <- race! (dio write->try_to_release_page fails)
      	   walk_page_buffers() ->release a bh ref

ext3_ordered_writepage holds bh ref and does unlock_page remaining
taking a bh ref, so this causes the race and failure of
try_to_release_page.

To fix this race, I used the approach of falling back to buffered
writes if try_to_release_page() fails on a page.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Mingming Cao <cmm@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/filemap.c  | 11 +++++++++--
 mm/truncate.c |  4 ++--
 2 files changed, 11 insertions(+), 4 deletions(-)

diff --git a/mm/filemap.c b/mm/filemap.c
index 54e96865085..876bc595d0f 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2129,13 +2129,20 @@ generic_file_direct_write(struct kiocb *iocb, const struct iovec *iov,
 	 * After a write we want buffered reads to be sure to go to disk to get
 	 * the new data.  We invalidate clean cached page from the region we're
 	 * about to write.  We do this *before* the write so that we can return
-	 * -EIO without clobbering -EIOCBQUEUED from ->direct_IO().
+	 * without clobbering -EIOCBQUEUED from ->direct_IO().
 	 */
 	if (mapping->nrpages) {
 		written = invalidate_inode_pages2_range(mapping,
 					pos >> PAGE_CACHE_SHIFT, end);
-		if (written)
+		/*
+		 * If a page can not be invalidated, return 0 to fall back
+		 * to buffered write.
+		 */
+		if (written) {
+			if (written == -EBUSY)
+				return 0;
 			goto out;
+		}
 	}
 
 	written = mapping->a_ops->direct_IO(WRITE, iocb, iov, pos, *nr_segs);
diff --git a/mm/truncate.c b/mm/truncate.c
index 250505091d3..6650c1d878b 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -380,7 +380,7 @@ static int do_launder_page(struct address_space *mapping, struct page *page)
  * Any pages which are found to be mapped into pagetables are unmapped prior to
  * invalidation.
  *
- * Returns -EIO if any pages could not be invalidated.
+ * Returns -EBUSY if any pages could not be invalidated.
  */
 int invalidate_inode_pages2_range(struct address_space *mapping,
 				  pgoff_t start, pgoff_t end)
@@ -440,7 +440,7 @@ int invalidate_inode_pages2_range(struct address_space *mapping,
 			ret2 = do_launder_page(mapping, page);
 			if (ret2 == 0) {
 				if (!invalidate_complete_page2(mapping, page))
-					ret2 = -EIO;
+					ret2 = -EBUSY;
 			}
 			if (ret2 < 0)
 				ret = ret2;
-- 
GitLab


From 39dbbb4523754df4a822c69191a848a03e556dc7 Mon Sep 17 00:00:00 2001
From: Russ Dill <russ.dill@gmail.com>
Date: Tue, 2 Sep 2008 14:35:40 -0700
Subject: [PATCH 626/869] acer-wmi: remove debugfs entries upon unloading

The exit function neglects to remove debugfs entries, leading to a BUG
on reload.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/acer-wmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index c6c77a505ec..d8b0d326e45 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -1189,7 +1189,7 @@ static int create_debugfs(void)
 	return 0;
 
 error_debugfs:
-		remove_debugfs();
+	remove_debugfs();
 	return -ENOMEM;
 }
 
@@ -1272,6 +1272,7 @@ error_platform_register:
 static void __exit acer_wmi_exit(void)
 {
 	remove_sysfs(acer_platform_device);
+	remove_debugfs();
 	platform_device_del(acer_platform_device);
 	platform_driver_unregister(&acer_platform_driver);
 
-- 
GitLab


From 527655835ebac8f58a8f800a10700712a4c2affd Mon Sep 17 00:00:00 2001
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Date: Tue, 2 Sep 2008 14:35:41 -0700
Subject: [PATCH 627/869] mm/bootmem: silence section mismatch warning -
 contig_page_data/bootmem_node_data

WARNING: vmlinux.o(.data+0x1f5c0): Section mismatch in reference from the variable contig_page_data to the variable .init.data:bootmem_node_data
The variable contig_page_data references
the variable __initdata bootmem_node_data
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Sean MacLennan <smaclennan@pikatech.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/page_alloc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index feb791648a1..e293c58bea5 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4071,7 +4071,7 @@ void __init set_dma_reserve(unsigned long new_dma_reserve)
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
-struct pglist_data contig_page_data = { .bdata = &bootmem_node_data[0] };
+struct pglist_data __refdata contig_page_data = { .bdata = &bootmem_node_data[0] };
 EXPORT_SYMBOL(contig_page_data);
 #endif
 
-- 
GitLab


From bd7aa4b2dafd8e653df265479d99c80747602a50 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Tue, 2 Sep 2008 14:35:43 -0700
Subject: [PATCH 628/869] MAINTAINERS: add a maintainer for the BCM5974
 multitouch driver

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index be83f3424f3..ced3c202f8e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -419,6 +419,12 @@ L:	linux-laptop@vger.kernel.org
 W:	http://www.canb.auug.org.au/~sfr/
 S:	Supported
 
+APPLE BCM5974 MULTITOUCH DRIVER
+P:	Henrik Rydberg
+M:	rydberg@euromail.se
+L:	linux-input@vger.kernel.org
+S:	Maintained
+
 APPLE SMC DRIVER
 P:	Nicolas Boichat
 M:	nicolas@boichat.ch
-- 
GitLab


From 363f66fe06c75270b669c88e321e6b354ba0201e Mon Sep 17 00:00:00 2001
From: Will Newton <will.newton@gmail.com>
Date: Tue, 2 Sep 2008 14:35:44 -0700
Subject: [PATCH 629/869] 8250: improve workaround for UARTs that don't
 re-assert THRE correctly

Recent changes to tighten the check for UARTs that don't correctly
re-assert THRE (01c194d9278efc15d4785ff205643e9c0bdcef53: "serial 8250:
tighten test for using backup timer") caused problems when such a UART was
opened for the second time - the bug could only successfully be detected
at first initialization.  For users of this version of this particular
UART IP it is fatal.

This patch stores the information about the bug in the bugs field of the
port structure when the port is first started up so subsequent opens can
check this bit even if the test for the bug fails.

David Brownell: "My own exposure to this is that the UART on DaVinci
hardware, which TI allegedly derived from its original 16550 logic, has
periodically gone from working to unusable with the mainline 8250.c ...
and back and forth a bunch.  Currently it's "unusable", a regression from
some previous versions.  With this patch from Will, it's usable."

Signed-off-by: Will Newton <will.newton@gmail.com>
Acked-by: Alex Williamson <alex.williamson@hp.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Cc: <stable@kernel.org>		[2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/serial/8250.c | 16 ++++++++++++----
 drivers/serial/8250.h |  1 +
 2 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 342e12fb1c2..9ccc563d873 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1908,14 +1908,22 @@ static int serial8250_startup(struct uart_port *port)
 		 * kick the UART on a regular basis.
 		 */
 		if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+			up->bugs |= UART_BUG_THRE;
 			pr_debug("ttyS%d - using backup timer\n", port->line);
-			up->timer.function = serial8250_backup_timeout;
-			up->timer.data = (unsigned long)up;
-			mod_timer(&up->timer, jiffies +
-				poll_timeout(up->port.timeout) + HZ / 5);
 		}
 	}
 
+	/*
+	 * The above check will only give an accurate result the first time
+	 * the port is opened so this value needs to be preserved.
+	 */
+	if (up->bugs & UART_BUG_THRE) {
+		up->timer.function = serial8250_backup_timeout;
+		up->timer.data = (unsigned long)up;
+		mod_timer(&up->timer, jiffies +
+			  poll_timeout(up->port.timeout) + HZ / 5);
+	}
+
 	/*
 	 * If the "interrupt" for this port doesn't correspond with any
 	 * hardware interrupt, we use a timer-based system.  The original
diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h
index 78c00162b04..520260326f3 100644
--- a/drivers/serial/8250.h
+++ b/drivers/serial/8250.h
@@ -47,6 +47,7 @@ struct serial8250_config {
 #define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
 #define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
 #define UART_BUG_NOMSR	(1 << 2)	/* UART has buggy MSR status bits (Au1x00) */
+#define UART_BUG_THRE	(1 << 3)	/* UART has buggy THRE reassertion */
 
 #define PROBE_RSA	(1 << 0)
 #define PROBE_ANY	(~0)
-- 
GitLab


From e385ea63f44b475e034a78b6d8bc6bb50caf72ca Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Tue, 2 Sep 2008 14:35:46 -0700
Subject: [PATCH 630/869] mmc: at91_mci: don't use coherent dma buffers

At91_mci is abusing dma_free_coherent(), which may not be called with IRQs
disabled.  I saw "mkfs.ext3" on an MMC card objecting voluminously as each
write completed:

 WARNING: at arch/arm/mm/consistent.c:368 dma_free_coherent+0x2c/0x224()
 [<c002726c>] (dump_stack+0x0/0x14) from [<c00387d4>] (warn_on_slowpath+0x4c/0x68)
 [<c0038788>] (warn_on_slowpath+0x0/0x68) from [<c0028768>] (dma_free_coherent+0x2c/0x224)
  r6:00008008 r5:ffc06000 r4:00000000
 [<c002873c>] (dma_free_coherent+0x0/0x224) from [<c01918ac>] (at91_mci_irq+0x374/0x420)
 [<c0191538>] (at91_mci_irq+0x0/0x420) from [<c0065d9c>] (handle_IRQ_event+0x2c/0x6c)
 ...

This bug has been around for a LONG time.  The MM warning is from late
2005, but the driver merged a year later ...  so I'm puzzled why nobody
noticed this before now.

The fix involves noting that this buffer shouldn't be DMA-coherent; it's
just used for normal DMA writes.  So replace it with standard kmalloc()
buffering and DMA mapping calls.

This is the quickie fix.  A better one would not rely on allocating large
bounce buffers.  (Note that dma_alloc_coherent could have failed too, but
that case was ignored...  kmalloc is a bit more likely to fail though.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Pierre Ossman <drzeus-mmc@drzeus.cx>
Cc: Andrew Victor <linux@maxim.org.za>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/host/at91_mci.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index 6915f40ac8a..1f8b5b36222 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -621,12 +621,21 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command
 				if (cpu_is_at91sam9260 () || cpu_is_at91sam9263())
 					if (host->total_length < 12)
 						host->total_length = 12;
-				host->buffer = dma_alloc_coherent(NULL,
-						host->total_length,
-						&host->physical_address, GFP_KERNEL);
+
+				host->buffer = kmalloc(host->total_length, GFP_KERNEL);
+				if (!host->buffer) {
+					pr_debug("Can't alloc tx buffer\n");
+					cmd->error = -ENOMEM;
+					mmc_request_done(host->mmc, host->request);
+					return;
+				}
 
 				at91_mci_sg_to_dma(host, data);
 
+				host->physical_address = dma_map_single(NULL,
+						host->buffer, host->total_length,
+						DMA_TO_DEVICE);
+
 				pr_debug("Transmitting %d bytes\n", host->total_length);
 
 				at91_mci_write(host, ATMEL_PDC_TPR, host->physical_address);
@@ -694,7 +703,10 @@ static void at91_mci_completed_command(struct at91mci_host *host, unsigned int s
 	cmd->resp[3] = at91_mci_read(host, AT91_MCI_RSPR(3));
 
 	if (host->buffer) {
-		dma_free_coherent(NULL, host->total_length, host->buffer, host->physical_address);
+		dma_unmap_single(NULL,
+				host->physical_address, host->total_length,
+				DMA_TO_DEVICE);
+		kfree(host->buffer);
 		host->buffer = NULL;
 	}
 
-- 
GitLab


From add0d4dfd660e9e4fd0af3eac3cad23583c9558f Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Tue, 2 Sep 2008 14:35:48 -0700
Subject: [PATCH 631/869] pid_ns: zap_pid_ns_processes: fix the ->child_reaper
 changing

zap_pid_ns_processes() sets pid_ns->child_reaper = NULL, this is wrong.

Yes, we have already killed all tasks in this namespace, and sys_wait4()
doesn't see any child.  But this doesn't mean ->children list is empty, we
may have EXIT_DEAD tasks which are not visible to do_wait().  In that case
the subsequent forget_original_parent() will crash the kernel because it
will try to re-parent these tasks to the NULL reaper.

Even if there are no childs, it is not good that forget_original_parent()
uses reaper == NULL.

Change the code to set ->child_reaper = init_pid_ns.child_reaper instead.
We could use pid_ns->parent->child_reaper as well, I think this does not
really matter.  These EXIT_DEAD tasks are not visible to the new ->parent
after re-parenting, they will silently do release_task() eventually.

Note that we must change ->child_reaper, otherwise
forget_original_parent() will use reaper == father, and in that case we
will hit the (correct) BUG_ON(!list_empty(&father->children)).

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/pid_namespace.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index ea567b78d1a..598f1eec982 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -179,9 +179,12 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
 		rc = sys_wait4(-1, NULL, __WALL, NULL);
 	} while (rc != -ECHILD);
 
-
-	/* Child reaper for the pid namespace is going away */
-	pid_ns->child_reaper = NULL;
+	/*
+	 * We can not clear ->child_reaper or leave it alone.
+	 * There may by stealth EXIT_DEAD tasks on ->children,
+	 * forget_original_parent() must move them somewhere.
+	 */
+	pid_ns->child_reaper = init_pid_ns.child_reaper;
 	acct_exit_ns(pid_ns);
 	return;
 }
-- 
GitLab


From 950bbabb5a804690a0201190de5c22837f72f83f Mon Sep 17 00:00:00 2001
From: Oleg Nesterov <oleg@tv-sign.ru>
Date: Tue, 2 Sep 2008 14:35:49 -0700
Subject: [PATCH 632/869] pid_ns: (BUG 11391) change ->child_reaper when
 init->group_leader exits

We don't change pid_ns->child_reaper when the main thread of the
subnamespace init exits.  As Robert Rex <robert.rex@exasol.com> pointed
out this is wrong.

Yes, the re-parenting itself works correctly, but if the reparented task
exits it needs ->parent->nsproxy->pid_ns in do_notify_parent(), and if the
main thread is zombie its ->nsproxy was already cleared by
exit_task_namespaces().

Introduce the new function, find_new_reaper(), which finds the new
->parent for the re-parenting and changes ->child_reaper if needed.  Kill
the now unneeded exit_child_reaper().

Also move the changing of ->child_reaper from zap_pid_ns_processes() to
find_new_reaper(), this consolidates the games with ->child_reaper and
makes it stable under tasklist_lock.

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11391

Reported-by: Robert Rex <robert.rex@exasol.com>
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/exit.c          | 78 ++++++++++++++++++------------------------
 kernel/pid_namespace.c |  6 ----
 2 files changed, 34 insertions(+), 50 deletions(-)

diff --git a/kernel/exit.c b/kernel/exit.c
index 75c64738763..25ed2ad986d 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -831,26 +831,50 @@ static void reparent_thread(struct task_struct *p, struct task_struct *father)
  * the child reaper process (ie "init") in our pid
  * space.
  */
+static struct task_struct *find_new_reaper(struct task_struct *father)
+{
+	struct pid_namespace *pid_ns = task_active_pid_ns(father);
+	struct task_struct *thread;
+
+	thread = father;
+	while_each_thread(father, thread) {
+		if (thread->flags & PF_EXITING)
+			continue;
+		if (unlikely(pid_ns->child_reaper == father))
+			pid_ns->child_reaper = thread;
+		return thread;
+	}
+
+	if (unlikely(pid_ns->child_reaper == father)) {
+		write_unlock_irq(&tasklist_lock);
+		if (unlikely(pid_ns == &init_pid_ns))
+			panic("Attempted to kill init!");
+
+		zap_pid_ns_processes(pid_ns);
+		write_lock_irq(&tasklist_lock);
+		/*
+		 * We can not clear ->child_reaper or leave it alone.
+		 * There may by stealth EXIT_DEAD tasks on ->children,
+		 * forget_original_parent() must move them somewhere.
+		 */
+		pid_ns->child_reaper = init_pid_ns.child_reaper;
+	}
+
+	return pid_ns->child_reaper;
+}
+
 static void forget_original_parent(struct task_struct *father)
 {
-	struct task_struct *p, *n, *reaper = father;
+	struct task_struct *p, *n, *reaper;
 	LIST_HEAD(ptrace_dead);
 
 	write_lock_irq(&tasklist_lock);
-
+	reaper = find_new_reaper(father);
 	/*
 	 * First clean up ptrace if we were using it.
 	 */
 	ptrace_exit(father, &ptrace_dead);
 
-	do {
-		reaper = next_thread(reaper);
-		if (reaper == father) {
-			reaper = task_child_reaper(father);
-			break;
-		}
-	} while (reaper->flags & PF_EXITING);
-
 	list_for_each_entry_safe(p, n, &father->children, sibling) {
 		p->real_parent = reaper;
 		if (p->parent == father) {
@@ -959,39 +983,6 @@ static void check_stack_usage(void)
 static inline void check_stack_usage(void) {}
 #endif
 
-static inline void exit_child_reaper(struct task_struct *tsk)
-{
-	if (likely(tsk->group_leader != task_child_reaper(tsk)))
-		return;
-
-	if (tsk->nsproxy->pid_ns == &init_pid_ns)
-		panic("Attempted to kill init!");
-
-	/*
-	 * @tsk is the last thread in the 'cgroup-init' and is exiting.
-	 * Terminate all remaining processes in the namespace and reap them
-	 * before exiting @tsk.
-	 *
-	 * Note that @tsk (last thread of cgroup-init) may not necessarily
-	 * be the child-reaper (i.e main thread of cgroup-init) of the
-	 * namespace i.e the child_reaper may have already exited.
-	 *
-	 * Even after a child_reaper exits, we let it inherit orphaned children,
-	 * because, pid_ns->child_reaper remains valid as long as there is
-	 * at least one living sub-thread in the cgroup init.
-
-	 * This living sub-thread of the cgroup-init will be notified when
-	 * a child inherited by the 'child-reaper' exits (do_notify_parent()
-	 * uses __group_send_sig_info()). Further, when reaping child processes,
-	 * do_wait() iterates over children of all living sub threads.
-
-	 * i.e even though 'child_reaper' thread is listed as the parent of the
-	 * orphaned children, any living sub-thread in the cgroup-init can
-	 * perform the role of the child_reaper.
-	 */
-	zap_pid_ns_processes(tsk->nsproxy->pid_ns);
-}
-
 NORET_TYPE void do_exit(long code)
 {
 	struct task_struct *tsk = current;
@@ -1051,7 +1042,6 @@ NORET_TYPE void do_exit(long code)
 	}
 	group_dead = atomic_dec_and_test(&tsk->signal->live);
 	if (group_dead) {
-		exit_child_reaper(tsk);
 		hrtimer_cancel(&tsk->signal->real_timer);
 		exit_itimers(tsk->signal);
 	}
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index 598f1eec982..fab8ea86fac 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -179,12 +179,6 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
 		rc = sys_wait4(-1, NULL, __WALL, NULL);
 	} while (rc != -ECHILD);
 
-	/*
-	 * We can not clear ->child_reaper or leave it alone.
-	 * There may by stealth EXIT_DEAD tasks on ->children,
-	 * forget_original_parent() must move them somewhere.
-	 */
-	pid_ns->child_reaper = init_pid_ns.child_reaper;
 	acct_exit_ns(pid_ns);
 	return;
 }
-- 
GitLab


From 09a2910e54646f7a334702fbafa7a6129dc072e6 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Tue, 2 Sep 2008 14:35:51 -0700
Subject: [PATCH 633/869] cirrusfb: check_par fixes

1. Check if virtual resolution fits into memory.
   Otherwise, Linux hangs during panning.
2. When selected use all available memory to
    maximize yres_virtual to speed up panning
   (previously also xres_virtual was increased).
3. Simplify memory restriction calculations.

Signed-off-by: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/cirrusfb.c | 59 ++++++++++++----------------------------
 1 file changed, 18 insertions(+), 41 deletions(-)

diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index c14b2435d23..e729fb27964 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -628,27 +628,18 @@ static long cirrusfb_get_mclk(long freq, int bpp, long *div)
 static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 			      struct fb_info *info)
 {
-	int nom, den;		/* translyting from pixels->bytes */
-	int yres, i;
-	static struct { int xres, yres; } modes[] =
-	{ { 1600, 1280 },
-	  { 1280, 1024 },
-	  { 1024, 768 },
-	  { 800, 600 },
-	  { 640, 480 },
-	  { -1, -1 } };
+	int yres;
+	/* memory size in pixels */
+	unsigned pixels = info->screen_size * 8 / var->bits_per_pixel;
 
 	switch (var->bits_per_pixel) {
 	case 1:
-		nom = 4;
-		den = 8;
+		pixels /= 4;
 		break;		/* 8 pixel per byte, only 1/4th of mem usable */
 	case 8:
 	case 16:
 	case 24:
 	case 32:
-		nom = var->bits_per_pixel / 8;
-		den = 1;
 		break;		/* 1 pixel == 1 byte */
 	default:
 		printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..."
@@ -658,43 +649,29 @@ static int cirrusfb_check_var(struct fb_var_screeninfo *var,
 		return -EINVAL;
 	}
 
-	if (var->xres * nom / den * var->yres > info->screen_size) {
-		printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected..."
-			"resolution too high to fit into video memory!\n",
-			var->xres, var->yres, var->bits_per_pixel);
-		DPRINTK("EXIT - EINVAL error\n");
-		return -EINVAL;
-	}
-
+	if (var->xres_virtual < var->xres)
+		var->xres_virtual = var->xres;
 	/* use highest possible virtual resolution */
-	if (var->xres_virtual == -1 &&
-	    var->yres_virtual == -1) {
-		printk(KERN_INFO
-		     "cirrusfb: using maximum available virtual resolution\n");
-		for (i = 0; modes[i].xres != -1; i++) {
-			int size = modes[i].xres * nom / den * modes[i].yres;
-			if (size < info->screen_size / 2)
-				break;
-		}
-		if (modes[i].xres == -1) {
-			printk(KERN_ERR "cirrusfb: could not find a virtual "
-				"resolution that fits into video memory!!\n");
-			DPRINTK("EXIT - EINVAL error\n");
-			return -EINVAL;
-		}
-		var->xres_virtual = modes[i].xres;
-		var->yres_virtual = modes[i].yres;
+	if (var->yres_virtual == -1) {
+		var->yres_virtual = pixels / var->xres_virtual;
 
 		printk(KERN_INFO "cirrusfb: virtual resolution set to "
 			"maximum of %dx%d\n", var->xres_virtual,
 			var->yres_virtual);
 	}
-
-	if (var->xres_virtual < var->xres)
-		var->xres_virtual = var->xres;
 	if (var->yres_virtual < var->yres)
 		var->yres_virtual = var->yres;
 
+	if (var->xres_virtual * var->yres_virtual > pixels) {
+		printk(KERN_ERR "cirrusfb: mode %dx%dx%d rejected... "
+		      "virtual resolution too high to fit into video memory!\n",
+			var->xres_virtual, var->yres_virtual,
+			var->bits_per_pixel);
+		DPRINTK("EXIT - EINVAL error\n");
+		return -EINVAL;
+	}
+
+
 	if (var->xoffset < 0)
 		var->xoffset = 0;
 	if (var->yoffset < 0)
-- 
GitLab


From 36fd71d293898a59b14e49da1f6e81c1a58f2035 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Tue, 2 Sep 2008 14:35:52 -0700
Subject: [PATCH 634/869] devcgroup: fix race against rmdir()

During the use of a dev_cgroup, we should guarantee the corresponding
cgroup won't be deleted (i.e.  via rmdir).  This can be done through
css_get(&dev_cgroup->css), but here we can just get and use the dev_cgroup
under rcu_read_lock.

And also remove checking NULL dev_cgroup, it won't be NULL since a task
always belongs to a cgroup.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 security/device_cgroup.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 7bd296cca04..46f23971f7e 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -508,12 +508,11 @@ int devcgroup_inode_permission(struct inode *inode, int mask)
 		return 0;
 	if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
 		return 0;
-	dev_cgroup = css_to_devcgroup(task_subsys_state(current,
-				devices_subsys_id));
-	if (!dev_cgroup)
-		return 0;
 
 	rcu_read_lock();
+
+	dev_cgroup = task_devcgroup(current);
+
 	list_for_each_entry_rcu(wh, &dev_cgroup->whitelist, list) {
 		if (wh->type & DEV_ALL)
 			goto acc_check;
@@ -533,6 +532,7 @@ acc_check:
 		rcu_read_unlock();
 		return 0;
 	}
+
 	rcu_read_unlock();
 
 	return -EPERM;
@@ -543,12 +543,10 @@ int devcgroup_inode_mknod(int mode, dev_t dev)
 	struct dev_cgroup *dev_cgroup;
 	struct dev_whitelist_item *wh;
 
-	dev_cgroup = css_to_devcgroup(task_subsys_state(current,
-				devices_subsys_id));
-	if (!dev_cgroup)
-		return 0;
-
 	rcu_read_lock();
+
+	dev_cgroup = task_devcgroup(current);
+
 	list_for_each_entry(wh, &dev_cgroup->whitelist, list) {
 		if (wh->type & DEV_ALL)
 			goto acc_check;
@@ -566,6 +564,8 @@ acc_check:
 		rcu_read_unlock();
 		return 0;
 	}
+
 	rcu_read_unlock();
+
 	return -EPERM;
 }
-- 
GitLab


From 4b8561521dbaa3d766b198496b220e984e3bf756 Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Tue, 2 Sep 2008 14:35:53 -0700
Subject: [PATCH 635/869] mm: show quicklist usage in /proc/meminfo

Quicklists can consume several GB of memory.  We should provide a means of
monitoring this.

After this patch is applied, /proc/meminfo will output the following:

% cat /proc/meminfo

MemTotal:      7715392 kB
MemFree:       5401600 kB
Buffers:         80384 kB
Cached:         300800 kB
SwapCached:          0 kB
Active:         235584 kB
Inactive:       262656 kB
SwapTotal:     2031488 kB
SwapFree:      2031488 kB
Dirty:            3520 kB
Writeback:           0 kB
AnonPages:      117696 kB
Mapped:          38528 kB
Slab:          1589952 kB
SReclaimable:    23104 kB
SUnreclaim:    1566848 kB
PageTables:      14656 kB
NFS_Unstable:        0 kB
Bounce:              0 kB
WritebackTmp:        0 kB
CommitLimit:   5889152 kB
Committed_AS:   393152 kB
VmallocTotal: 17592177655808 kB
VmallocUsed:     29056 kB
VmallocChunk: 17592177626432 kB
Quicklists:     130944 kB
HugePages_Total:     0
HugePages_Free:      0
HugePages_Rsvd:      0
HugePages_Surp:      0
Hugepagesize:    262144 kB

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Keiichiro Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/proc/proc_misc.c       | 7 +++++--
 include/linux/quicklist.h | 7 +++++++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index ded96986296..00f10a2dcf1 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -24,6 +24,7 @@
 #include <linux/tty.h>
 #include <linux/string.h>
 #include <linux/mman.h>
+#include <linux/quicklist.h>
 #include <linux/proc_fs.h>
 #include <linux/ioport.h>
 #include <linux/mm.h>
@@ -189,7 +190,8 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		"Committed_AS: %8lu kB\n"
 		"VmallocTotal: %8lu kB\n"
 		"VmallocUsed:  %8lu kB\n"
-		"VmallocChunk: %8lu kB\n",
+		"VmallocChunk: %8lu kB\n"
+		"Quicklists:   %8lu kB\n",
 		K(i.totalram),
 		K(i.freeram),
 		K(i.bufferram),
@@ -221,7 +223,8 @@ static int meminfo_read_proc(char *page, char **start, off_t off,
 		K(committed),
 		(unsigned long)VMALLOC_TOTAL >> 10,
 		vmi.used >> 10,
-		vmi.largest_chunk >> 10
+		vmi.largest_chunk >> 10,
+		K(quicklist_total_size())
 		);
 
 		len += hugetlb_report_meminfo(page + len);
diff --git a/include/linux/quicklist.h b/include/linux/quicklist.h
index 39b66713a0b..bd466439c58 100644
--- a/include/linux/quicklist.h
+++ b/include/linux/quicklist.h
@@ -80,6 +80,13 @@ void quicklist_trim(int nr, void (*dtor)(void *),
 
 unsigned long quicklist_total_size(void);
 
+#else
+
+static inline unsigned long quicklist_total_size(void)
+{
+	return 0;
+}
+
 #endif
 
 #endif /* LINUX_QUICKLIST_H */
-- 
GitLab


From b954185214c3b562c3fcc651e9ec69d421d76bfa Mon Sep 17 00:00:00 2001
From: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Date: Tue, 2 Sep 2008 14:35:58 -0700
Subject: [PATCH 636/869] mm: size of quicklists shouldn't be proportional to
 the number of CPUs

Quicklists store pages for each CPU as caches.  (Each CPU can cache
node_free_pages/16 pages)

It is used for page table cache.  exit() will increase the cache size,
while fork() consumes it.

So for example if an apache-style application runs (one parent and many
child model), one CPU process will fork() while another CPU will process
the middleware work and exit().

At that time, the CPU on which the parent runs doesn't have page table
cache at all.  Others (on which children runs) have maximum caches.

	QList_max = (#ofCPUs - 1) x Free / 16
	=> QList_max / (Free + QList_max) = (#ofCPUs - 1) / (16 + #ofCPUs - 1)

So, How much quicklist memory is used in the maximum case?

This is proposional to # of CPUs because the limit of per cpu quicklist
cache doesn't see the number of cpus.

Above calculation mean

	 Number of CPUs per node            2    4    8   16
	 ==============================  ====================
	 QList_max / (Free + QList_max)   5.8%  16%  30%  48%

Wow! Quicklist can spend about 50% memory at worst case.

My demonstration program is here
--------------------------------------------------------------------------------
#define _GNU_SOURCE

#include <stdio.h>
#include <errno.h>
#include <stdlib.h>
#include <string.h>
#include <sched.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/wait.h>

#define BUFFSIZE 512

int max_cpu(void)	/* get max number of logical cpus from /proc/cpuinfo */
{
  FILE *fd;
  char *ret, buffer[BUFFSIZE];
  int cpu = 1;

  fd = fopen("/proc/cpuinfo", "r");
  if (fd == NULL) {
    perror("fopen(/proc/cpuinfo)");
    exit(EXIT_FAILURE);
  }
  while (1) {
    ret = fgets(buffer, BUFFSIZE, fd);
    if (ret == NULL)
      break;
    if (!strncmp(buffer, "processor", 9))
      cpu = atoi(strchr(buffer, ':') + 2);
  }
  fclose(fd);
  return cpu;
}

void cpu_bind(int cpu)	/* bind current process to one cpu */
{
  cpu_set_t mask;
  int ret;

  CPU_ZERO(&mask);
  CPU_SET(cpu, &mask);
  ret = sched_setaffinity(0, sizeof(mask), &mask);
  if (ret == -1) {
    perror("sched_setaffinity()");
    exit(EXIT_FAILURE);
  }
  sched_yield();	/* not necessary */
}

#define MMAP_SIZE (10 * 1024 * 1024)	/* 10 MB */
#define FORK_INTERVAL 1	/* 1 second */

main(int argc, char *argv[])
{
  int cpu_max, nextcpu;
  long pagesize;
  pid_t pid;

  /* set max number of logical cpu */
  if (argc > 1)
    cpu_max = atoi(argv[1]) - 1;
  else
    cpu_max = max_cpu();

  /* get the page size */
  pagesize = sysconf(_SC_PAGESIZE);
  if (pagesize == -1) {
    perror("sysconf(_SC_PAGESIZE)");
    exit(EXIT_FAILURE);
  }

  /* prepare parent process */
  cpu_bind(0);
  nextcpu = cpu_max;

loop:

  /* select destination cpu for child process by round-robin rule */
  if (++nextcpu > cpu_max)
    nextcpu = 1;

  pid = fork();

  if (pid == 0) { /* child action */

    char *p;
    int i;

    /* consume page tables */
    p = mmap(0, MMAP_SIZE, PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, 0, 0);
    i = MMAP_SIZE / pagesize;
    while (i-- > 0) {
      *p = 1;
      p += pagesize;
    }

    /* move to other cpu */
    cpu_bind(nextcpu);
/*
    printf("a child moved to cpu%d after mmap().\n", nextcpu);
    fflush(stdout);
 */

    /* back page tables to pgtable_quicklist */
    exit(0);

  } else if (pid > 0) { /* parent action */

    sleep(FORK_INTERVAL);
    waitpid(pid, NULL, WNOHANG);

  }

  goto loop;
}
----------------------------------------

When above program which does task migration runs, my 8GB box spends
800MB of memory for quicklist.  This is not memory leak but doesn't seem
good.

% cat /proc/meminfo

MemTotal:        7701568 kB
MemFree:         4724672 kB
(snip)
Quicklists:       844800 kB

because

- My machine spec is
	number of numa node: 2
	number of cpus:      8 (4CPU x2 node)
        total mem:           8GB (4GB x2 node)
        free mem:            about 5GB

- Then, 4.7GB x 16% ~= 880MB.
  So, Quicklist can use 800MB.

So, if following spec machine run that program

   CPUs: 64 (8cpu x 8node)
   Mem:  1TB (128GB x8node)

Then, quicklist can waste 300GB (= 1TB x 30%).  It is too large.

So, I don't like cache policies which is proportional to # of cpus.

My patch changes the number of caches
from:
   per-cpu-cache-amount = memory_on_node / 16
to
   per-cpu-cache-amount = memory_on_node / 16 / number_of_cpus_on_node.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Keiichiro Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Tested-by: David Miller <davem@davemloft.net>
Acked-by: Mike Travis <travis@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/quicklist.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/mm/quicklist.c b/mm/quicklist.c
index 3f703f7cb39..8dbb6805ef3 100644
--- a/mm/quicklist.c
+++ b/mm/quicklist.c
@@ -26,7 +26,10 @@ DEFINE_PER_CPU(struct quicklist, quicklist)[CONFIG_NR_QUICK];
 static unsigned long max_pages(unsigned long min_pages)
 {
 	unsigned long node_free_pages, max;
-	struct zone *zones = NODE_DATA(numa_node_id())->node_zones;
+	int node = numa_node_id();
+	struct zone *zones = NODE_DATA(node)->node_zones;
+	int num_cpus_on_node;
+	node_to_cpumask_ptr(cpumask_on_node, node);
 
 	node_free_pages =
 #ifdef CONFIG_ZONE_DMA
@@ -38,6 +41,10 @@ static unsigned long max_pages(unsigned long min_pages)
 		zone_page_state(&zones[ZONE_NORMAL], NR_FREE_PAGES);
 
 	max = node_free_pages / FRACTION_OF_NODE_MEM;
+
+	num_cpus_on_node = cpus_weight_nr(*cpumask_on_node);
+	max /= num_cpus_on_node;
+
 	return max(max, min_pages);
 }
 
-- 
GitLab


From 61e55d0576d0e7eb4fecaeb25b3618e035de5be1 Mon Sep 17 00:00:00 2001
From: Nadia Derbey <Nadia.Derbey@bull.net>
Date: Tue, 2 Sep 2008 14:35:59 -0700
Subject: [PATCH 637/869] ipc: document the new auto_msgmni proc file

Update Documentation/filesystems/proc.txt: it describes the file
auto_msgmni intoduced to enable/disable msgmni automatic recomputing upon
memory add/remove (see thread http://lkml.org/lkml/2008/7/4/27).  Also
added a description for msgmni (this filex is only listed in
Documentation/sysctl/kernel.txt).

Signed-off-by: Nadia Derbey <Nadia.Derbey@bull.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/proc.txt | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index 64557821ee5..394eb2cc1c3 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1339,6 +1339,25 @@ Enables/Disables the protection of the per-process proc entries "maps" and
 "smaps".  When enabled, the contents of these files are visible only to
 readers that are allowed to ptrace() the given process.
 
+msgmni
+------
+
+Maximum number of message queue ids on the system.
+This value scales to the amount of lowmem. It is automatically recomputed
+upon memory add/remove or ipc namespace creation/removal.
+When a value is written into this file, msgmni's value becomes fixed, i.e. it
+is not recomputed anymore when one of the above events occurs.
+Use auto_msgmni to change this behavior.
+
+auto_msgmni
+-----------
+
+Enables/Disables automatic recomputing of msgmni upon memory add/remove or
+upon ipc namespace creation/removal (see the msgmni description above).
+Echoing "1" into this file enables msgmni automatic recomputing.
+Echoing "0" turns it off.
+auto_msgmni default value is 1.
+
 
 2.4 /proc/sys/vm - The virtual memory subsystem
 -----------------------------------------------
-- 
GitLab


From 3f6e2f137c5b83c3c2d48fae971e845c3450cc7c Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Tue, 2 Sep 2008 14:36:00 -0700
Subject: [PATCH 638/869] hp-wmi: update to match current rfkill semantics

hp-wmi currently changes the RFKill state by altering the struct members
rather than using the dedicated interface, meaning that update events
won't be pushed to userspace.  This patch fixes that, along with fixing
the declared type of the WWAN kill switch.  It also ensures that rfkill
interfaces are only registered for hardware that exists.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ivo van Doorn <ivdoorn@gmail.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/hp-wmi.c | 81 ++++++++++++++++++++++++-------------------
 1 file changed, 46 insertions(+), 35 deletions(-)

diff --git a/drivers/misc/hp-wmi.c b/drivers/misc/hp-wmi.c
index 1dbcbcb323a..c6c6d09b376 100644
--- a/drivers/misc/hp-wmi.c
+++ b/drivers/misc/hp-wmi.c
@@ -177,9 +177,9 @@ static int hp_wmi_wifi_state(void)
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x100)
-		return 1;
+		return RFKILL_STATE_UNBLOCKED;
 	else
-		return 0;
+		return RFKILL_STATE_SOFT_BLOCKED;
 }
 
 static int hp_wmi_bluetooth_state(void)
@@ -187,9 +187,9 @@ static int hp_wmi_bluetooth_state(void)
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x10000)
-		return 1;
+		return RFKILL_STATE_UNBLOCKED;
 	else
-		return 0;
+		return RFKILL_STATE_SOFT_BLOCKED;
 }
 
 static int hp_wmi_wwan_state(void)
@@ -197,9 +197,9 @@ static int hp_wmi_wwan_state(void)
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	if (wireless & 0x1000000)
-		return 1;
+		return RFKILL_STATE_UNBLOCKED;
 	else
-		return 0;
+		return RFKILL_STATE_SOFT_BLOCKED;
 }
 
 static ssize_t show_display(struct device *dev, struct device_attribute *attr,
@@ -338,12 +338,14 @@ void hp_wmi_notify(u32 value, void *context)
 			}
 		} else if (eventcode == 0x5) {
 			if (wifi_rfkill)
-				wifi_rfkill->state = hp_wmi_wifi_state();
+				rfkill_force_state(wifi_rfkill,
+						   hp_wmi_wifi_state());
 			if (bluetooth_rfkill)
-				bluetooth_rfkill->state =
-				    hp_wmi_bluetooth_state();
+				rfkill_force_state(bluetooth_rfkill,
+						   hp_wmi_bluetooth_state());
 			if (wwan_rfkill)
-				wwan_rfkill->state = hp_wmi_wwan_state();
+				rfkill_force_state(wwan_rfkill,
+						   hp_wmi_wwan_state());
 		} else
 			printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
 			       eventcode);
@@ -398,6 +400,7 @@ static void cleanup_sysfs(struct platform_device *device)
 static int __init hp_wmi_bios_setup(struct platform_device *device)
 {
 	int err;
+	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
 
 	err = device_create_file(&device->dev, &dev_attr_display);
 	if (err)
@@ -412,28 +415,33 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 	if (err)
 		goto add_sysfs_error;
 
-	wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
-	wifi_rfkill->name = "hp-wifi";
-	wifi_rfkill->state = hp_wmi_wifi_state();
-	wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
-	wifi_rfkill->user_claim_unsupported = 1;
-
-	bluetooth_rfkill = rfkill_allocate(&device->dev,
-					   RFKILL_TYPE_BLUETOOTH);
-	bluetooth_rfkill->name = "hp-bluetooth";
-	bluetooth_rfkill->state = hp_wmi_bluetooth_state();
-	bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
-	bluetooth_rfkill->user_claim_unsupported = 1;
-
-	wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WIMAX);
-	wwan_rfkill->name = "hp-wwan";
-	wwan_rfkill->state = hp_wmi_wwan_state();
-	wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
-	wwan_rfkill->user_claim_unsupported = 1;
-
-	rfkill_register(wifi_rfkill);
-	rfkill_register(bluetooth_rfkill);
-	rfkill_register(wwan_rfkill);
+	if (wireless & 0x1) {
+		wifi_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WLAN);
+		wifi_rfkill->name = "hp-wifi";
+		wifi_rfkill->state = hp_wmi_wifi_state();
+		wifi_rfkill->toggle_radio = hp_wmi_wifi_set;
+		wifi_rfkill->user_claim_unsupported = 1;
+		rfkill_register(wifi_rfkill);
+	}
+
+	if (wireless & 0x2) {
+		bluetooth_rfkill = rfkill_allocate(&device->dev,
+						   RFKILL_TYPE_BLUETOOTH);
+		bluetooth_rfkill->name = "hp-bluetooth";
+		bluetooth_rfkill->state = hp_wmi_bluetooth_state();
+		bluetooth_rfkill->toggle_radio = hp_wmi_bluetooth_set;
+		bluetooth_rfkill->user_claim_unsupported = 1;
+		rfkill_register(bluetooth_rfkill);
+	}
+
+	if (wireless & 0x4) {
+		wwan_rfkill = rfkill_allocate(&device->dev, RFKILL_TYPE_WWAN);
+		wwan_rfkill->name = "hp-wwan";
+		wwan_rfkill->state = hp_wmi_wwan_state();
+		wwan_rfkill->toggle_radio = hp_wmi_wwan_set;
+		wwan_rfkill->user_claim_unsupported = 1;
+		rfkill_register(wwan_rfkill);
+	}
 
 	return 0;
 add_sysfs_error:
@@ -445,9 +453,12 @@ static int __exit hp_wmi_bios_remove(struct platform_device *device)
 {
 	cleanup_sysfs(device);
 
-	rfkill_unregister(wifi_rfkill);
-	rfkill_unregister(bluetooth_rfkill);
-	rfkill_unregister(wwan_rfkill);
+	if (wifi_rfkill)
+		rfkill_unregister(wifi_rfkill);
+	if (bluetooth_rfkill)
+		rfkill_unregister(bluetooth_rfkill);
+	if (wwan_rfkill)
+		rfkill_unregister(wwan_rfkill);
 
 	return 0;
 }
-- 
GitLab


From a8823aefd142d2a9c4b3661bf8712ccd2da1b220 Mon Sep 17 00:00:00 2001
From: Matthew Garrett <mjg59@srcf.ucam.org>
Date: Tue, 2 Sep 2008 14:36:03 -0700
Subject: [PATCH 639/869] hp-wmi: add proper hotkey support

It turns out that event 0x4 merely indcates that a hotkey has been
pressed, not which one.  A further query is required in order to determine
the actual keypress.  The following patch adds support for that along with
the known keycodes.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/misc/hp-wmi.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/misc/hp-wmi.c b/drivers/misc/hp-wmi.c
index c6c6d09b376..6d407c2a4f9 100644
--- a/drivers/misc/hp-wmi.c
+++ b/drivers/misc/hp-wmi.c
@@ -49,6 +49,7 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
 #define HPWMI_ALS_QUERY 0x3
 #define HPWMI_DOCK_QUERY 0x4
 #define HPWMI_WIRELESS_QUERY 0x5
+#define HPWMI_HOTKEY_QUERY 0xc
 
 static int __init hp_wmi_bios_setup(struct platform_device *device);
 static int __exit hp_wmi_bios_remove(struct platform_device *device);
@@ -69,7 +70,7 @@ struct bios_return {
 
 struct key_entry {
 	char type;		/* See KE_* below */
-	u8 code;
+	u16 code;
 	u16 keycode;
 };
 
@@ -79,7 +80,9 @@ static struct key_entry hp_wmi_keymap[] = {
 	{KE_SW, 0x01, SW_DOCK},
 	{KE_KEY, 0x02, KEY_BRIGHTNESSUP},
 	{KE_KEY, 0x03, KEY_BRIGHTNESSDOWN},
-	{KE_KEY, 0x04, KEY_HELP},
+	{KE_KEY, 0x20e6, KEY_PROG1},
+	{KE_KEY, 0x2142, KEY_MEDIA},
+	{KE_KEY, 0x231b, KEY_HELP},
 	{KE_END, 0}
 };
 
@@ -318,6 +321,9 @@ void hp_wmi_notify(u32 value, void *context)
 
 	if (obj && obj->type == ACPI_TYPE_BUFFER && obj->buffer.length == 8) {
 		int eventcode = *((u8 *) obj->buffer.pointer);
+		if (eventcode == 0x4)
+			eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
+							 0);
 		key = hp_wmi_get_entry_by_scancode(eventcode);
 		if (key) {
 			switch (key->type) {
-- 
GitLab


From bf6910c0afb1e416a99ad5b2296e088449fbe481 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Tue, 2 Sep 2008 14:36:03 -0700
Subject: [PATCH 640/869] tdfxfb: fix SDRAM memory size detection

Fix memory detection on Voodoo3 cards with SDRAM memory.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tdfxfb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 77aafcfae03..fa7cbecbe82 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -426,7 +426,7 @@ static unsigned long do_lfb_size(struct tdfx_par *par, unsigned short dev_id)
 	if (dev_id < PCI_DEVICE_ID_3DFX_VOODOO5) {
 		/* Banshee/Voodoo3 */
 		chip_size = 2;
-		if (has_sgram && (draminit0 & DRAMINIT0_SGRAM_TYPE))
+		if (has_sgram && !(draminit0 & DRAMINIT0_SGRAM_TYPE))
 			chip_size = 1;
 	} else {
 		/* Voodoo4/5 */
-- 
GitLab


From b4a49b12e879ce79f495cc318c4b33caec6922e8 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Tue, 2 Sep 2008 14:36:04 -0700
Subject: [PATCH 641/869] tdfxfb: fix frame buffer name overrun

If there are more then one graphics card handled by the tdfxfb driver the
name of the frame buffer overruns reserved size.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/tdfxfb.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index fa7cbecbe82..4599a4385bc 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -95,7 +95,6 @@ static inline int mtrr_del(int reg, unsigned long base,
 #define VOODOO5_MAX_PIXCLOCK 350000
 
 static struct fb_fix_screeninfo tdfx_fix __devinitdata = {
-	.id =		"3Dfx",
 	.type =		FB_TYPE_PACKED_PIXELS,
 	.visual =	FB_VISUAL_PSEUDOCOLOR,
 	.ypanstep =	1,
@@ -1200,15 +1199,15 @@ static int __devinit tdfxfb_probe(struct pci_dev *pdev,
 	/* Configure the default fb_fix_screeninfo first */
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_3DFX_BANSHEE:
-		strcat(tdfx_fix.id, " Banshee");
+		strcpy(tdfx_fix.id, "3Dfx Banshee");
 		default_par->max_pixclock = BANSHEE_MAX_PIXCLOCK;
 		break;
 	case PCI_DEVICE_ID_3DFX_VOODOO3:
-		strcat(tdfx_fix.id, " Voodoo3");
+		strcpy(tdfx_fix.id, "3Dfx Voodoo3");
 		default_par->max_pixclock = VOODOO3_MAX_PIXCLOCK;
 		break;
 	case PCI_DEVICE_ID_3DFX_VOODOO5:
-		strcat(tdfx_fix.id, " Voodoo5");
+		strcpy(tdfx_fix.id, "3Dfx Voodoo5");
 		default_par->max_pixclock = VOODOO5_MAX_PIXCLOCK;
 		break;
 	}
-- 
GitLab


From 73442daf2ea85e2a779396b76b1a39b10188ecb5 Mon Sep 17 00:00:00 2001
From: Jan Altenberg <jan.altenberg@linutronix.de>
Date: Tue, 2 Sep 2008 14:36:05 -0700
Subject: [PATCH 642/869] rtc_time_to_tm: fix signed/unsigned arithmetic

commit 945185a69daa457c4c5e46e47f4afad7dcea734f ("rtc: rtc_time_to_tm: use
unsigned arithmetic") changed the some types in rtc_time_to_tm() to
unsigned:

 void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
 {
-       register int days, month, year;
+       unsigned int days, month, year;

This doesn't work for all cases, because days is checked for < 0 later
on:

if (days < 0) {
	year -= 1;
	days += 365 + LEAP_YEAR(year);
}

I think the correct fix would be to keep days signed and do an appropriate
cast later on.

Signed-off-by: Jan Altenberg <jan.altenberg@linutronix.de>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Dmitri Vorobiev <dmitri.vorobiev@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-lib.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-lib.c b/drivers/rtc/rtc-lib.c
index 9f996ec881c..dd70bf73ce9 100644
--- a/drivers/rtc/rtc-lib.c
+++ b/drivers/rtc/rtc-lib.c
@@ -51,10 +51,11 @@ EXPORT_SYMBOL(rtc_year_days);
  */
 void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
 {
-	unsigned int days, month, year;
+	unsigned int month, year;
+	int days;
 
 	days = time / 86400;
-	time -= days * 86400;
+	time -= (unsigned int) days * 86400;
 
 	/* day of the week, 1970-01-01 was a Thursday */
 	tm->tm_wday = (days + 4) % 7;
-- 
GitLab


From bb8fb4e6840ecebdc61f7ebd0653187e7128dde5 Mon Sep 17 00:00:00 2001
From: Mike Christie <michaelc@cs.wisc.edu>
Date: Tue, 2 Sep 2008 14:36:07 -0700
Subject: [PATCH 643/869] ibft: fix target info parsing in ibft module

I got this patch through Red Hat's bugzilla from the bug submitter and
patch creator.  I have just fixed it up so it applies without fuzz to
upstream kernels.

Original patch and description from Shyam kumar Iyer:

The issue [ibft module not displaying targets with short names] is because
of an offset calculatation error in the iscsi_ibft.c code.  Due to this
error directory structure for the target in /sys/firmware/ibft does not
get created and so the initiator is unable to connect to the target.

Note that this bug surfaced only with an name that had a short section at
the end.  eg: "iqn.1984-05.com.dell:dell".  It did not surface when the
iqn's had a longer section at the end.  eg:
"iqn.2001-04.com.example:storage.disk2.sys1.xyz"

So, the eot_offset was calculated such that an extra 48 bytes i.e.  the
size of the ibft_header which has already been accounted was subtracted
twice.

This was not evident with longer iqn names because they would overshoot
the total ibft length more than 48 bytes and thus would escape the bug.

Signed-off-by: Shyam Kumar Iyer <shyam_iyer@dell.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Konrad Rzeszutek <konrad@virtualiron.com>
Cc: Peter Jones <pjones@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/firmware/iscsi_ibft.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 8024e3bfd87..b91ef63126e 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -669,8 +669,7 @@ static int __init ibft_register_kobjects(struct ibft_table_header *header,
 
 	control = (void *)header + sizeof(*header);
 	end = (void *)control + control->hdr.length;
-	eot_offset = (void *)header + header->length -
-		     (void *)control - sizeof(*header);
+	eot_offset = (void *)header + header->length - (void *)control;
 	rc = ibft_verify_hdr("control", (struct ibft_hdr *)control, id_control,
 			     sizeof(*control));
 
-- 
GitLab


From 8b3a8944a9c0f2a3afc1678798b44f0442924a37 Mon Sep 17 00:00:00 2001
From: Russ Anderson <rja@sgi.com>
Date: Tue, 2 Sep 2008 14:36:09 -0700
Subject: [PATCH 644/869] sysfs: document files in /sys/firmware/sgi_uv/

Document files in /sys/firmware/sgi_uv/.

Signed-off-by: Russ Anderson <rja@sgi.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 .../ABI/testing/sysfs-firmware-sgi_uv         | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-firmware-sgi_uv

diff --git a/Documentation/ABI/testing/sysfs-firmware-sgi_uv b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
new file mode 100644
index 00000000000..4573fd4b787
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-firmware-sgi_uv
@@ -0,0 +1,27 @@
+What:		/sys/firmware/sgi_uv/
+Date:		August 2008
+Contact:	Russ Anderson <rja@sgi.com>
+Description:
+		The /sys/firmware/sgi_uv directory contains information
+		about the SGI UV platform.
+
+		Under that directory are a number of files:
+
+			partition_id
+			coherence_id
+
+		The partition_id entry contains the partition id.
+		SGI UV systems can be partitioned into multiple physical
+		machines, which each partition running a unique copy
+		of the operating system.  Each partition will have a unique
+		partition id.  To display the partition id, use the command:
+
+			cat /sys/firmware/sgi_uv/partition_id
+
+		The coherence_id entry contains the coherence id.
+		A partitioned SGI UV system can have one or more coherence
+		domain.  The coherence id indicates which coherence domain
+		this partition is in.  To display the coherence id, use the
+		command:
+
+			cat /sys/firmware/sgi_uv/coherence_id
-- 
GitLab


From 74c4633da7994eddcfcd2762a448c6889cc2b5bd Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Tue, 2 Sep 2008 14:36:11 -0700
Subject: [PATCH 645/869] rtc-cmos: wake again from S5

Update rtc-cmos shutdown handling to leave RTC alarms active, resolving
http://bugzilla.kernel.org/show_bug.cgi?id=11411 on several boards.  There
are still some systems where the ACPI event handling doesn't cooperate.
(Possibly related to bugid 11312, reporting the spontaneous disabling of
RTC events.)

Bug 11411 reported that changes to work around some ACPI event issues
broke wake-from-S5 handling, as used for DVR applications.  (They like to
power off, then wake later to record programs.)

[yakui.zhao@intel.com: add shutdown for PNP devices]
[dbrownell@users.sourceforge.net: update comments]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Stefan Bauer <stefan.bauer@cs.tu-chemnitz.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/rtc/rtc-cmos.c | 38 ++++++++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 6 deletions(-)

diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 6ea349aba3b..b184367637d 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -800,7 +800,6 @@ static void __exit cmos_do_remove(struct device *dev)
 static int cmos_suspend(struct device *dev, pm_message_t mesg)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
-	int		do_wake = device_may_wakeup(dev);
 	unsigned char	tmp;
 
 	/* only the alarm might be a wakeup event source */
@@ -809,7 +808,7 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
 	if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) {
 		unsigned char	mask;
 
-		if (do_wake)
+		if (device_may_wakeup(dev))
 			mask = RTC_IRQMASK & ~RTC_AIE;
 		else
 			mask = RTC_IRQMASK;
@@ -837,6 +836,17 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg)
 	return 0;
 }
 
+/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even
+ * after a detour through G3 "mechanical off", although the ACPI spec
+ * says wakeup should only work from G1/S4 "hibernate".  To most users,
+ * distinctions between S4 and S5 are pointless.  So when the hardware
+ * allows, don't draw that distinction.
+ */
+static inline int cmos_poweroff(struct device *dev)
+{
+	return cmos_suspend(dev, PMSG_HIBERNATE);
+}
+
 static int cmos_resume(struct device *dev)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
@@ -884,6 +894,12 @@ static int cmos_resume(struct device *dev)
 #else
 #define	cmos_suspend	NULL
 #define	cmos_resume	NULL
+
+static inline int cmos_poweroff(struct device *dev)
+{
+	return -ENOSYS;
+}
+
 #endif
 
 /*----------------------------------------------------------------*/
@@ -903,10 +919,6 @@ static int cmos_resume(struct device *dev)
 static int __devinit
 cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
 {
-	/* REVISIT paranoia argues for a shutdown notifier, since PNP
-	 * drivers can't provide shutdown() methods to disable IRQs.
-	 * Or better yet, fix PNP to allow those methods...
-	 */
 	if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0))
 		/* Some machines contain a PNP entry for the RTC, but
 		 * don't define the IRQ. It should always be safe to
@@ -942,6 +954,13 @@ static int cmos_pnp_resume(struct pnp_dev *pnp)
 #define	cmos_pnp_resume		NULL
 #endif
 
+static void cmos_pnp_shutdown(struct device *pdev)
+{
+	if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev))
+		return;
+
+	cmos_do_shutdown();
+}
 
 static const struct pnp_device_id rtc_ids[] = {
 	{ .id = "PNP0b00", },
@@ -961,6 +980,10 @@ static struct pnp_driver cmos_pnp_driver = {
 	.flags		= PNP_DRIVER_RES_DO_NOT_CHANGE,
 	.suspend	= cmos_pnp_suspend,
 	.resume		= cmos_pnp_resume,
+	.driver		= {
+		.name	  = (char *)driver_name,
+		.shutdown = cmos_pnp_shutdown,
+	}
 };
 
 #endif	/* CONFIG_PNP */
@@ -986,6 +1009,9 @@ static int __exit cmos_platform_remove(struct platform_device *pdev)
 
 static void cmos_platform_shutdown(struct platform_device *pdev)
 {
+	if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pdev->dev))
+		return;
+
 	cmos_do_shutdown();
 }
 
-- 
GitLab


From 9d3593574702ae1899e23a1535da1ac71f928042 Mon Sep 17 00:00:00 2001
From: John Kacur <jkacur@gmail.com>
Date: Tue, 2 Sep 2008 14:36:13 -0700
Subject: [PATCH 646/869] pm_qos_requirement might sleep

Make PM_QOS and CPU_IDLE play nicer when run with the RT-Preempt kernel.

The purpose of the patch is to remove the spin_lock around the read in the
function pm_qos_requirement - since spinlocks can sleep in -rt and this
function is called from idle.

CPU_IDLE polls the target_value's of some of the pm_qos parameters from
the idle loop causing sleeping locking warnings.  Changing the
target_value to an atomic avoids this issue.

Remove the spinlock in pm_qos_requirement by making target_value an atomic
type.

Signed-off-by: mark gross <mgross@linux.intel.com>
Signed-off-by: John Kacur <jkacur@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/pm_qos_params.c | 25 +++++++++----------------
 1 file changed, 9 insertions(+), 16 deletions(-)

diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c
index da9c2dda6a4..dfdec524d1b 100644
--- a/kernel/pm_qos_params.c
+++ b/kernel/pm_qos_params.c
@@ -43,7 +43,7 @@
 #include <linux/uaccess.h>
 
 /*
- * locking rule: all changes to target_value or requirements or notifiers lists
+ * locking rule: all changes to requirements or notifiers lists
  * or pm_qos_object list and pm_qos_objects need to happen with pm_qos_lock
  * held, taken with _irqsave.  One lock to rule them all
  */
@@ -66,7 +66,7 @@ struct pm_qos_object {
 	struct miscdevice pm_qos_power_miscdev;
 	char *name;
 	s32 default_value;
-	s32 target_value;
+	atomic_t target_value;
 	s32 (*comparitor)(s32, s32);
 };
 
@@ -77,7 +77,7 @@ static struct pm_qos_object cpu_dma_pm_qos = {
 	.notifiers = &cpu_dma_lat_notifier,
 	.name = "cpu_dma_latency",
 	.default_value = 2000 * USEC_PER_SEC,
-	.target_value = 2000 * USEC_PER_SEC,
+	.target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
 	.comparitor = min_compare
 };
 
@@ -87,7 +87,7 @@ static struct pm_qos_object network_lat_pm_qos = {
 	.notifiers = &network_lat_notifier,
 	.name = "network_latency",
 	.default_value = 2000 * USEC_PER_SEC,
-	.target_value = 2000 * USEC_PER_SEC,
+	.target_value = ATOMIC_INIT(2000 * USEC_PER_SEC),
 	.comparitor = min_compare
 };
 
@@ -99,7 +99,7 @@ static struct pm_qos_object network_throughput_pm_qos = {
 	.notifiers = &network_throughput_notifier,
 	.name = "network_throughput",
 	.default_value = 0,
-	.target_value = 0,
+	.target_value = ATOMIC_INIT(0),
 	.comparitor = max_compare
 };
 
@@ -150,11 +150,11 @@ static void update_target(int target)
 		extreme_value = pm_qos_array[target]->comparitor(
 				extreme_value, node->value);
 	}
-	if (pm_qos_array[target]->target_value != extreme_value) {
+	if (atomic_read(&pm_qos_array[target]->target_value) != extreme_value) {
 		call_notifier = 1;
-		pm_qos_array[target]->target_value = extreme_value;
+		atomic_set(&pm_qos_array[target]->target_value, extreme_value);
 		pr_debug(KERN_ERR "new target for qos %d is %d\n", target,
-			pm_qos_array[target]->target_value);
+			atomic_read(&pm_qos_array[target]->target_value));
 	}
 	spin_unlock_irqrestore(&pm_qos_lock, flags);
 
@@ -193,14 +193,7 @@ static int find_pm_qos_object_by_minor(int minor)
  */
 int pm_qos_requirement(int pm_qos_class)
 {
-	int ret_val;
-	unsigned long flags;
-
-	spin_lock_irqsave(&pm_qos_lock, flags);
-	ret_val = pm_qos_array[pm_qos_class]->target_value;
-	spin_unlock_irqrestore(&pm_qos_lock, flags);
-
-	return ret_val;
+	return atomic_read(&pm_qos_array[pm_qos_class]->target_value);
 }
 EXPORT_SYMBOL_GPL(pm_qos_requirement);
 
-- 
GitLab


From 8b76f46a2db29407fed66cf4aca19d61b3dcb3e1 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Tue, 2 Sep 2008 14:36:14 -0700
Subject: [PATCH 647/869] drivers/char/random.c: fix a race which can lead to a
 bogus BUG()

Fix a bug reported by and diagnosed by Aaron Straus.

This is a regression intruduced into 2.6.26 by

    commit adc782dae6c4c0f6fb679a48a544cfbcd79ae3dc
    Author: Matt Mackall <mpm@selenic.com>
    Date:   Tue Apr 29 01:03:07 2008 -0700

        random: simplify and rename credit_entropy_store

credit_entropy_bits() does:

	spin_lock_irqsave(&r->lock, flags);
	...
	if (r->entropy_count > r->poolinfo->POOLBITS)
		r->entropy_count = r->poolinfo->POOLBITS;

so there is a time window in which this BUG_ON():

static size_t account(struct entropy_store *r, size_t nbytes, int min,
		      int reserved)
{
	unsigned long flags;

	BUG_ON(r->entropy_count > r->poolinfo->POOLBITS);

	/* Hold lock while accounting */
	spin_lock_irqsave(&r->lock, flags);

can trigger.

We could fix this by moving the assertion inside the lock, but it seems
safer and saner to revert to the old behaviour wherein
entropy_store.entropy_count at no time exceeds
entropy_store.poolinfo->POOLBITS.

Reported-by: Aaron Straus <aaron@merfinllc.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@kernel.org>		[2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/char/random.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/char/random.c b/drivers/char/random.c
index 1838aa3d24f..7ce1ac4baa6 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -407,7 +407,7 @@ struct entropy_store {
 	/* read-write data: */
 	spinlock_t lock;
 	unsigned add_ptr;
-	int entropy_count;
+	int entropy_count;	/* Must at no time exceed ->POOLBITS! */
 	int input_rotate;
 };
 
@@ -520,6 +520,7 @@ static void mix_pool_bytes(struct entropy_store *r, const void *in, int bytes)
 static void credit_entropy_bits(struct entropy_store *r, int nbits)
 {
 	unsigned long flags;
+	int entropy_count;
 
 	if (!nbits)
 		return;
@@ -527,20 +528,20 @@ static void credit_entropy_bits(struct entropy_store *r, int nbits)
 	spin_lock_irqsave(&r->lock, flags);
 
 	DEBUG_ENT("added %d entropy credits to %s\n", nbits, r->name);
-	r->entropy_count += nbits;
-	if (r->entropy_count < 0) {
+	entropy_count = r->entropy_count;
+	entropy_count += nbits;
+	if (entropy_count < 0) {
 		DEBUG_ENT("negative entropy/overflow\n");
-		r->entropy_count = 0;
-	} else if (r->entropy_count > r->poolinfo->POOLBITS)
-		r->entropy_count = r->poolinfo->POOLBITS;
+		entropy_count = 0;
+	} else if (entropy_count > r->poolinfo->POOLBITS)
+		entropy_count = r->poolinfo->POOLBITS;
+	r->entropy_count = entropy_count;
 
 	/* should we wake readers? */
-	if (r == &input_pool &&
-	    r->entropy_count >= random_read_wakeup_thresh) {
+	if (r == &input_pool && entropy_count >= random_read_wakeup_thresh) {
 		wake_up_interruptible(&random_read_wait);
 		kill_fasync(&fasync, SIGIO, POLL_IN);
 	}
-
 	spin_unlock_irqrestore(&r->lock, flags);
 }
 
-- 
GitLab


From 37b08e34a98c664bea86e3fae718ac45a46b7276 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 2 Sep 2008 20:14:15 -0700
Subject: [PATCH 648/869] ipsec: Fix deadlock in xfrm_state management.

Ever since commit 4c563f7669c10a12354b72b518c2287ffc6ebfb3
("[XFRM]: Speed up xfrm_policy and xfrm_state walking") it is
illegal to call __xfrm_state_destroy (and thus xfrm_state_put())
with xfrm_state_lock held.  If we do, we'll deadlock since we
have the lock already and __xfrm_state_destroy() tries to take
it again.

Fix this by pushing the xfrm_state_put() calls after the lock
is dropped.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/xfrm/xfrm_state.c | 32 +++++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 9 deletions(-)

diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c
index 4c6914ef7d9..7bd62f61593 100644
--- a/net/xfrm/xfrm_state.c
+++ b/net/xfrm/xfrm_state.c
@@ -780,11 +780,13 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 {
 	unsigned int h;
 	struct hlist_node *entry;
-	struct xfrm_state *x, *x0;
+	struct xfrm_state *x, *x0, *to_put;
 	int acquire_in_progress = 0;
 	int error = 0;
 	struct xfrm_state *best = NULL;
 
+	to_put = NULL;
+
 	spin_lock_bh(&xfrm_state_lock);
 	h = xfrm_dst_hash(daddr, saddr, tmpl->reqid, family);
 	hlist_for_each_entry(x, entry, xfrm_state_bydst+h, bydst) {
@@ -833,7 +835,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 		if (tmpl->id.spi &&
 		    (x0 = __xfrm_state_lookup(daddr, tmpl->id.spi,
 					      tmpl->id.proto, family)) != NULL) {
-			xfrm_state_put(x0);
+			to_put = x0;
 			error = -EEXIST;
 			goto out;
 		}
@@ -849,7 +851,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 		error = security_xfrm_state_alloc_acquire(x, pol->security, fl->secid);
 		if (error) {
 			x->km.state = XFRM_STATE_DEAD;
-			xfrm_state_put(x);
+			to_put = x;
 			x = NULL;
 			goto out;
 		}
@@ -870,7 +872,7 @@ xfrm_state_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
 			xfrm_hash_grow_check(x->bydst.next != NULL);
 		} else {
 			x->km.state = XFRM_STATE_DEAD;
-			xfrm_state_put(x);
+			to_put = x;
 			x = NULL;
 			error = -ESRCH;
 		}
@@ -881,6 +883,8 @@ out:
 	else
 		*err = acquire_in_progress ? -EAGAIN : error;
 	spin_unlock_bh(&xfrm_state_lock);
+	if (to_put)
+		xfrm_state_put(to_put);
 	return x;
 }
 
@@ -1067,18 +1071,20 @@ static struct xfrm_state *__xfrm_find_acq_byseq(u32 seq);
 
 int xfrm_state_add(struct xfrm_state *x)
 {
-	struct xfrm_state *x1;
+	struct xfrm_state *x1, *to_put;
 	int family;
 	int err;
 	int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY);
 
 	family = x->props.family;
 
+	to_put = NULL;
+
 	spin_lock_bh(&xfrm_state_lock);
 
 	x1 = __xfrm_state_locate(x, use_spi, family);
 	if (x1) {
-		xfrm_state_put(x1);
+		to_put = x1;
 		x1 = NULL;
 		err = -EEXIST;
 		goto out;
@@ -1088,7 +1094,7 @@ int xfrm_state_add(struct xfrm_state *x)
 		x1 = __xfrm_find_acq_byseq(x->km.seq);
 		if (x1 && ((x1->id.proto != x->id.proto) ||
 		    xfrm_addr_cmp(&x1->id.daddr, &x->id.daddr, family))) {
-			xfrm_state_put(x1);
+			to_put = x1;
 			x1 = NULL;
 		}
 	}
@@ -1110,6 +1116,9 @@ out:
 		xfrm_state_put(x1);
 	}
 
+	if (to_put)
+		xfrm_state_put(to_put);
+
 	return err;
 }
 EXPORT_SYMBOL(xfrm_state_add);
@@ -1269,10 +1278,12 @@ EXPORT_SYMBOL(xfrm_state_migrate);
 
 int xfrm_state_update(struct xfrm_state *x)
 {
-	struct xfrm_state *x1;
+	struct xfrm_state *x1, *to_put;
 	int err;
 	int use_spi = xfrm_id_proto_match(x->id.proto, IPSEC_PROTO_ANY);
 
+	to_put = NULL;
+
 	spin_lock_bh(&xfrm_state_lock);
 	x1 = __xfrm_state_locate(x, use_spi, x->props.family);
 
@@ -1281,7 +1292,7 @@ int xfrm_state_update(struct xfrm_state *x)
 		goto out;
 
 	if (xfrm_state_kern(x1)) {
-		xfrm_state_put(x1);
+		to_put = x1;
 		err = -EEXIST;
 		goto out;
 	}
@@ -1295,6 +1306,9 @@ int xfrm_state_update(struct xfrm_state *x)
 out:
 	spin_unlock_bh(&xfrm_state_lock);
 
+	if (to_put)
+		xfrm_state_put(to_put);
+
 	if (err)
 		return err;
 
-- 
GitLab


From fbb16e243887332dd5754e48ffe5b963378f3cd2 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 3 Sep 2008 00:54:47 +0200
Subject: [PATCH 649/869] [x86] Fix TSC calibration issues

Larry Finger reported at http://lkml.org/lkml/2008/9/1/90:
An ancient laptop of mine started throwing errors from b43legacy when
I started using 2.6.27 on it. This has been bisected to commit bfc0f59
"x86: merge tsc calibration".

The unification of the TSC code adopted mostly the 64bit code, which
prefers PMTIMER/HPET over the PIT calibration.

Larrys system has an AMD K6 CPU. Such systems are known to have
PMTIMER incarnations which run at double speed. This results in a
miscalibration of the TSC by factor 0.5. So the resulting calibrated
CPU/TSC speed is half of the real CPU speed, which means that the TSC
based delay loop will run half the time it should run. That might
explain why the b43legacy driver went berserk.

On the other hand we know about systems, where the PIT based
calibration results in random crap due to heavy SMI/SMM
disturbance. On those systems the PMTIMER/HPET based calibration logic
with SMI detection shows better results.

According to Alok also virtualized systems suffer from the PIT
calibration method.

The solution is to use a more wreckage aware aproach than the current
either/or decision.

1) reimplement the retry loop which was dropped from the 32bit code
during the merge. It repeats the calibration and selects the lowest
frequency value as this is probably the closest estimate to the real
frequency

2) Monitor the delta of the TSC values in the delay loop which waits
for the PIT counter to reach zero. If the maximum value is
significantly different from the minimum, then we have a pretty safe
indicator that the loop was disturbed by an SMI.

3) keep the pmtimer/hpet reference as a backup solution for systems
where the SMI disturbance is a permanent point of failure for PIT
based calibration

4) do the loop iteration for both methods, record the lowest value and
decide after all iterations finished.

5) Set a clear preference to PIT based calibration when the result
makes sense.

The implementation does the reference calibration based on
HPET/PMTIMER around the delay, which is necessary for the PIT anyway,
but keeps separate TSC values to ensure the "independency" of the
resulting calibration values.

Tested on various 32bit/64bit machines including Geode 266Mhz, AMD K6
(affected machine with a double speed pmtimer which I grabbed out of
the dump), Pentium class machines and AMD/Intel 64 bit boxen.

Bisected-by:  Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/tsc.c | 235 ++++++++++++++++++++++++++++++++----------
 1 file changed, 181 insertions(+), 54 deletions(-)

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 8e786b0d665..ac79bd143da 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -127,75 +127,202 @@ static u64 tsc_read_refs(u64 *pm, u64 *hpet)
  */
 unsigned long native_calibrate_tsc(void)
 {
-	unsigned long flags;
-	u64 tsc1, tsc2, tr1, tr2, delta, pm1, pm2, hpet1, hpet2;
-	int hpet = is_hpet_enabled();
-	unsigned int tsc_khz_val = 0;
+	u64 tsc1, tsc2, tr1, tr2, tsc, delta, pm1, pm2, hpet1, hpet2;
+	unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
+	unsigned long flags, tscmin, tscmax;
+	int hpet = is_hpet_enabled(), pitcnt, i;
 
-	local_irq_save(flags);
-
-	tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
-
-	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-	outb(0xb0, 0x43);
-	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
-	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
-	tr1 = get_cycles();
-	while ((inb(0x61) & 0x20) == 0);
-	tr2 = get_cycles();
-
-	tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
-
-	local_irq_restore(flags);
+	/*
+	 * Run 5 calibration loops to get the lowest frequency value
+	 * (the best estimate). We use two different calibration modes
+	 * here:
+	 *
+	 * 1) PIT loop. We set the PIT Channel 2 to oneshot mode and
+	 * load a timeout of 50ms. We read the time right after we
+	 * started the timer and wait until the PIT count down reaches
+	 * zero. In each wait loop iteration we read the TSC and check
+	 * the delta to the previous read. We keep track of the min
+	 * and max values of that delta. The delta is mostly defined
+	 * by the IO time of the PIT access, so we can detect when a
+	 * SMI/SMM disturbance happend between the two reads. If the
+	 * maximum time is significantly larger than the minimum time,
+	 * then we discard the result and have another try.
+	 *
+	 * 2) Reference counter. If available we use the HPET or the
+	 * PMTIMER as a reference to check the sanity of that value.
+	 * We use separate TSC readouts and check inside of the
+	 * reference read for a SMI/SMM disturbance. We dicard
+	 * disturbed values here as well. We do that around the PIT
+	 * calibration delay loop as we have to wait for a certain
+	 * amount of time anyway.
+	 */
+	for (i = 0; i < 5; i++) {
+
+		tscmin = ULONG_MAX;
+		tscmax = 0;
+		pitcnt = 0;
+
+		local_irq_save(flags);
+
+		/*
+		 * Read the start value and the reference count of
+		 * hpet/pmtimer when available:
+		 */
+		tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
+
+		/* Set the Gate high, disable speaker */
+		outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+		/*
+		 * Setup CTC channel 2* for mode 0, (interrupt on terminal
+		 * count mode), binary count. Set the latch register to 50ms
+		 * (LSB then MSB) to begin countdown.
+		 *
+		 * Some devices need a delay here.
+		 */
+		outb(0xb0, 0x43);
+		outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
+		outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
+
+		tsc = tr1 = tr2 = get_cycles();
+
+		while ((inb(0x61) & 0x20) == 0) {
+			tr2 = get_cycles();
+			delta = tr2 - tsc;
+			tsc = tr2;
+			if ((unsigned int) delta < tscmin)
+				tscmin = (unsigned int) delta;
+			if ((unsigned int) delta > tscmax)
+				tscmax = (unsigned int) delta;
+			pitcnt++;
+		}
+
+		/*
+		 * We waited at least 50ms above. Now read
+		 * pmtimer/hpet reference again
+		 */
+		tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
+
+		local_irq_restore(flags);
+
+		/*
+		 * Sanity checks:
+		 *
+		 * If we were not able to read the PIT more than 5000
+		 * times, then we have been hit by a massive SMI
+		 *
+		 * If the maximum is 10 times larger than the minimum,
+		 * then we got hit by an SMI as well.
+		 */
+		if (pitcnt > 5000 && tscmax < 10 * tscmin) {
+
+			/* Calculate the PIT value */
+			delta = tr2 - tr1;
+			do_div(delta, 50);
+
+			/* We take the smallest value into account */
+			tsc_pit_min = min(tsc_pit_min, (unsigned long) delta);
+		}
+
+		/* hpet or pmtimer available ? */
+		if (!hpet && !pm1 && !pm2)
+			continue;
+
+		/* Check, whether the sampling was disturbed by an SMI */
+		if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX)
+			continue;
+
+		tsc2 = (tsc2 - tsc1) * 1000000LL;
+
+		if (hpet) {
+			if (hpet2 < hpet1)
+				hpet2 += 0x100000000ULL;
+			hpet2 -= hpet1;
+			tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
+			do_div(tsc1, 1000000);
+		} else {
+			if (pm2 < pm1)
+				pm2 += (u64)ACPI_PM_OVRRUN;
+			pm2 -= pm1;
+			tsc1 = pm2 * 1000000000LL;
+			do_div(tsc1, PMTMR_TICKS_PER_SEC);
+		}
+
+		do_div(tsc2, tsc1);
+		tsc_ref_min = min(tsc_ref_min, (unsigned long) tsc2);
+	}
 
 	/*
-	 * Preset the result with the raw and inaccurate PIT
-	 * calibration value
+	 * Now check the results.
 	 */
-	delta = (tr2 - tr1);
-	do_div(delta, 50);
-	tsc_khz_val = delta;
+	if (tsc_pit_min == ULONG_MAX) {
+		/* PIT gave no useful value */
+		printk(KERN_WARNING "TSC: PIT calibration failed due to "
+		       "SMI disturbance.\n");
+
+		/* We don't have an alternative source, disable TSC */
+		if (!hpet && !pm1 && !pm2) {
+			printk("TSC: No reference (HPET/PMTIMER) available\n");
+			return 0;
+		}
+
+		/* The alternative source failed as well, disable TSC */
+		if (tsc_ref_min == ULONG_MAX) {
+			printk(KERN_WARNING "TSC: HPET/PMTIMER calibration "
+			       "failed due to SMI disturbance.\n");
+			return 0;
+		}
+
+		/* Use the alternative source */
+		printk(KERN_INFO "TSC: using %s reference calibration\n",
+		       hpet ? "HPET" : "PMTIMER");
+
+		return tsc_ref_min;
+	}
 
-	/* hpet or pmtimer available ? */
+	/* We don't have an alternative source, use the PIT calibration value */
 	if (!hpet && !pm1 && !pm2) {
-		printk(KERN_INFO "TSC calibrated against PIT\n");
-		goto out;
+		printk(KERN_INFO "TSC: Using PIT calibration value\n");
+		return tsc_pit_min;
 	}
 
-	/* Check, whether the sampling was disturbed by an SMI */
-	if (tsc1 == ULLONG_MAX || tsc2 == ULLONG_MAX) {
-		printk(KERN_WARNING "TSC calibration disturbed by SMI, "
-				"using PIT calibration result\n");
-		goto out;
+	/* The alternative source failed, use the PIT calibration value */
+	if (tsc_ref_min == ULONG_MAX) {
+		printk(KERN_WARNING "TSC: HPET/PMTIMER calibration failed due "
+		       "to SMI disturbance. Using PIT calibration\n");
+		return tsc_pit_min;
 	}
 
-	tsc2 = (tsc2 - tsc1) * 1000000LL;
-
-	if (hpet) {
-		printk(KERN_INFO "TSC calibrated against HPET\n");
-		if (hpet2 < hpet1)
-			hpet2 += 0x100000000ULL;
-		hpet2 -= hpet1;
-		tsc1 = ((u64)hpet2 * hpet_readl(HPET_PERIOD));
-		do_div(tsc1, 1000000);
-	} else {
-		printk(KERN_INFO "TSC calibrated against PM_TIMER\n");
-		if (pm2 < pm1)
-			pm2 += (u64)ACPI_PM_OVRRUN;
-		pm2 -= pm1;
-		tsc1 = pm2 * 1000000000LL;
-		do_div(tsc1, PMTMR_TICKS_PER_SEC);
+	/* Check the reference deviation */
+	delta = ((u64) tsc_pit_min) * 100;
+	do_div(delta, tsc_ref_min);
+
+	/*
+	 * If both calibration results are inside a 5% window, the we
+	 * use the lower frequency of those as it is probably the
+	 * closest estimate.
+	 */
+	if (delta >= 95 && delta <= 105) {
+		printk(KERN_INFO "TSC: PIT calibration confirmed by %s.\n",
+		       hpet ? "HPET" : "PMTIMER");
+		printk(KERN_INFO "TSC: using %s calibration value\n",
+		       tsc_pit_min <= tsc_ref_min ? "PIT" :
+		       hpet ? "HPET" : "PMTIMER");
+		return tsc_pit_min <= tsc_ref_min ? tsc_pit_min : tsc_ref_min;
 	}
 
-	do_div(tsc2, tsc1);
-	tsc_khz_val = tsc2;
+	printk(KERN_WARNING "TSC: PIT calibration deviates from %s: %lu %lu.\n",
+	       hpet ? "HPET" : "PMTIMER", tsc_pit_min, tsc_ref_min);
 
-out:
-	return tsc_khz_val;
+	/*
+	 * The calibration values differ too much. In doubt, we use
+	 * the PIT value as we know that there are PMTIMERs around
+	 * running at double speed.
+	 */
+	printk(KERN_INFO "TSC: Using PIT calibration value\n");
+	return tsc_pit_min;
 }
 
-
 #ifdef CONFIG_X86_32
 /* Only called from the Powernow K7 cpu freq driver */
 int recalibrate_cpu_khz(void)
-- 
GitLab


From 6c00055a819ce8a6e2c3af2f65d4ea1a8559c491 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Tue, 2 Sep 2008 23:38:32 -0700
Subject: [PATCH 650/869] tipc: Don't use structure names which easily globally
 conflict.

Andrew Morton reported a build failure on sparc32, because TIPC
uses names like "struct node" and there is a like named data
structure defined in linux/node.h

This just regexp replaces "struct node*" to "struct tipc_node*"
to avoid this and any future similar problems.

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/tipc/bcast.c       | 22 ++++++++--------
 net/tipc/bcast.h       | 22 ++++++++--------
 net/tipc/bearer.c      |  2 +-
 net/tipc/bearer.h      |  2 +-
 net/tipc/cluster.c     | 16 +++++------
 net/tipc/cluster.h     | 10 +++----
 net/tipc/discover.c    |  2 +-
 net/tipc/link.c        | 26 +++++++++---------
 net/tipc/link.h        |  2 +-
 net/tipc/name_table.h  |  2 +-
 net/tipc/net.c         |  2 +-
 net/tipc/net.h         |  2 +-
 net/tipc/node.c        | 60 +++++++++++++++++++++---------------------
 net/tipc/node.h        | 42 ++++++++++++++---------------
 net/tipc/node_subscr.c |  4 +--
 net/tipc/node_subscr.h | 10 +++----
 net/tipc/port.h        |  2 +-
 net/tipc/zone.c        |  4 +--
 net/tipc/zone.h        |  2 +-
 19 files changed, 117 insertions(+), 117 deletions(-)

diff --git a/net/tipc/bcast.c b/net/tipc/bcast.c
index b1ff16aa4bd..3ddaff42d1b 100644
--- a/net/tipc/bcast.c
+++ b/net/tipc/bcast.c
@@ -96,8 +96,8 @@ struct bcbearer {
 	struct media media;
 	struct bcbearer_pair bpairs[MAX_BEARERS];
 	struct bcbearer_pair bpairs_temp[TIPC_MAX_LINK_PRI + 1];
-	struct node_map remains;
-	struct node_map remains_new;
+	struct tipc_node_map remains;
+	struct tipc_node_map remains_new;
 };
 
 /**
@@ -110,7 +110,7 @@ struct bcbearer {
 
 struct bclink {
 	struct link link;
-	struct node node;
+	struct tipc_node node;
 };
 
 
@@ -149,7 +149,7 @@ static void bcbuf_decr_acks(struct sk_buff *buf)
  * Called with 'node' locked, bc_lock unlocked
  */
 
-static void bclink_set_gap(struct node *n_ptr)
+static void bclink_set_gap(struct tipc_node *n_ptr)
 {
 	struct sk_buff *buf = n_ptr->bclink.deferred_head;
 
@@ -202,7 +202,7 @@ static void bclink_retransmit_pkt(u32 after, u32 to)
  * Node is locked, bc_lock unlocked.
  */
 
-void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked)
+void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked)
 {
 	struct sk_buff *crs;
 	struct sk_buff *next;
@@ -250,7 +250,7 @@ void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked)
  * tipc_net_lock and node lock set
  */
 
-static void bclink_send_ack(struct node *n_ptr)
+static void bclink_send_ack(struct tipc_node *n_ptr)
 {
 	struct link *l_ptr = n_ptr->active_links[n_ptr->addr & 1];
 
@@ -264,7 +264,7 @@ static void bclink_send_ack(struct node *n_ptr)
  * tipc_net_lock and node lock set
  */
 
-static void bclink_send_nack(struct node *n_ptr)
+static void bclink_send_nack(struct tipc_node *n_ptr)
 {
 	struct sk_buff *buf;
 	struct tipc_msg *msg;
@@ -308,7 +308,7 @@ static void bclink_send_nack(struct node *n_ptr)
  * tipc_net_lock and node lock set
  */
 
-void tipc_bclink_check_gap(struct node *n_ptr, u32 last_sent)
+void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 last_sent)
 {
 	if (!n_ptr->bclink.supported ||
 	    less_eq(last_sent, mod(n_ptr->bclink.last_in)))
@@ -328,7 +328,7 @@ void tipc_bclink_check_gap(struct node *n_ptr, u32 last_sent)
 
 static void tipc_bclink_peek_nack(u32 dest, u32 sender_tag, u32 gap_after, u32 gap_to)
 {
-	struct node *n_ptr = tipc_node_find(dest);
+	struct tipc_node *n_ptr = tipc_node_find(dest);
 	u32 my_after, my_to;
 
 	if (unlikely(!n_ptr || !tipc_node_is_up(n_ptr)))
@@ -418,7 +418,7 @@ void tipc_bclink_recv_pkt(struct sk_buff *buf)
 	static int rx_count = 0;
 #endif
 	struct tipc_msg *msg = buf_msg(buf);
-	struct node* node = tipc_node_find(msg_prevnode(msg));
+	struct tipc_node* node = tipc_node_find(msg_prevnode(msg));
 	u32 next_in;
 	u32 seqno;
 	struct sk_buff *deferred;
@@ -538,7 +538,7 @@ u32 tipc_bclink_get_last_sent(void)
 	return last_sent;
 }
 
-u32 tipc_bclink_acks_missing(struct node *n_ptr)
+u32 tipc_bclink_acks_missing(struct tipc_node *n_ptr)
 {
 	return (n_ptr->bclink.supported &&
 		(tipc_bclink_get_last_sent() != n_ptr->bclink.acked));
diff --git a/net/tipc/bcast.h b/net/tipc/bcast.h
index a2416fa6b90..5aa024b99c5 100644
--- a/net/tipc/bcast.h
+++ b/net/tipc/bcast.h
@@ -41,12 +41,12 @@
 #define WSIZE 32
 
 /**
- * struct node_map - set of node identifiers
+ * struct tipc_node_map - set of node identifiers
  * @count: # of nodes in set
  * @map: bitmap of node identifiers that are in the set
  */
 
-struct node_map {
+struct tipc_node_map {
 	u32 count;
 	u32 map[MAX_NODES / WSIZE];
 };
@@ -68,7 +68,7 @@ struct port_list {
 };
 
 
-struct node;
+struct tipc_node;
 
 extern char tipc_bclink_name[];
 
@@ -77,7 +77,7 @@ extern char tipc_bclink_name[];
  * nmap_add - add a node to a node map
  */
 
-static inline void tipc_nmap_add(struct node_map *nm_ptr, u32 node)
+static inline void tipc_nmap_add(struct tipc_node_map *nm_ptr, u32 node)
 {
 	int n = tipc_node(node);
 	int w = n / WSIZE;
@@ -93,7 +93,7 @@ static inline void tipc_nmap_add(struct node_map *nm_ptr, u32 node)
  * nmap_remove - remove a node from a node map
  */
 
-static inline void tipc_nmap_remove(struct node_map *nm_ptr, u32 node)
+static inline void tipc_nmap_remove(struct tipc_node_map *nm_ptr, u32 node)
 {
 	int n = tipc_node(node);
 	int w = n / WSIZE;
@@ -109,7 +109,7 @@ static inline void tipc_nmap_remove(struct node_map *nm_ptr, u32 node)
  * nmap_equal - test for equality of node maps
  */
 
-static inline int tipc_nmap_equal(struct node_map *nm_a, struct node_map *nm_b)
+static inline int tipc_nmap_equal(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b)
 {
 	return !memcmp(nm_a, nm_b, sizeof(*nm_a));
 }
@@ -121,8 +121,8 @@ static inline int tipc_nmap_equal(struct node_map *nm_a, struct node_map *nm_b)
  * @nm_diff: output node map A-B (i.e. nodes of A that are not in B)
  */
 
-static inline void tipc_nmap_diff(struct node_map *nm_a, struct node_map *nm_b,
-				  struct node_map *nm_diff)
+static inline void tipc_nmap_diff(struct tipc_node_map *nm_a, struct tipc_node_map *nm_b,
+				  struct tipc_node_map *nm_diff)
 {
 	int stop = sizeof(nm_a->map) / sizeof(u32);
 	int w;
@@ -195,12 +195,12 @@ static inline void tipc_port_list_free(struct port_list *pl_ptr)
 
 int  tipc_bclink_init(void);
 void tipc_bclink_stop(void);
-void tipc_bclink_acknowledge(struct node *n_ptr, u32 acked);
+void tipc_bclink_acknowledge(struct tipc_node *n_ptr, u32 acked);
 int  tipc_bclink_send_msg(struct sk_buff *buf);
 void tipc_bclink_recv_pkt(struct sk_buff *buf);
 u32  tipc_bclink_get_last_sent(void);
-u32  tipc_bclink_acks_missing(struct node *n_ptr);
-void tipc_bclink_check_gap(struct node *n_ptr, u32 seqno);
+u32  tipc_bclink_acks_missing(struct tipc_node *n_ptr);
+void tipc_bclink_check_gap(struct tipc_node *n_ptr, u32 seqno);
 int  tipc_bclink_stats(char *stats_buf, const u32 buf_size);
 int  tipc_bclink_reset_stats(void);
 int  tipc_bclink_set_queue_limits(u32 limit);
diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c
index 6a9aba3edd0..a7a36779b9b 100644
--- a/net/tipc/bearer.c
+++ b/net/tipc/bearer.c
@@ -599,7 +599,7 @@ int tipc_block_bearer(const char *name)
 	spin_lock_bh(&b_ptr->publ.lock);
 	b_ptr->publ.blocked = 1;
 	list_for_each_entry_safe(l_ptr, temp_l_ptr, &b_ptr->links, link_list) {
-		struct node *n_ptr = l_ptr->owner;
+		struct tipc_node *n_ptr = l_ptr->owner;
 
 		spin_lock_bh(&n_ptr->lock);
 		tipc_link_reset(l_ptr);
diff --git a/net/tipc/bearer.h b/net/tipc/bearer.h
index 6a36b6600e6..ca573489271 100644
--- a/net/tipc/bearer.h
+++ b/net/tipc/bearer.h
@@ -104,7 +104,7 @@ struct bearer {
 	u32 continue_count;
 	int active;
 	char net_plane;
-	struct node_map nodes;
+	struct tipc_node_map nodes;
 };
 
 struct bearer_name {
diff --git a/net/tipc/cluster.c b/net/tipc/cluster.c
index 46ee6c58532..689fdefe9d0 100644
--- a/net/tipc/cluster.c
+++ b/net/tipc/cluster.c
@@ -48,8 +48,8 @@ static void tipc_cltr_multicast(struct cluster *c_ptr, struct sk_buff *buf,
 				u32 lower, u32 upper);
 static struct sk_buff *tipc_cltr_prepare_routing_msg(u32 data_size, u32 dest);
 
-struct node **tipc_local_nodes = NULL;
-struct node_map tipc_cltr_bcast_nodes = {0,{0,}};
+struct tipc_node **tipc_local_nodes = NULL;
+struct tipc_node_map tipc_cltr_bcast_nodes = {0,{0,}};
 u32 tipc_highest_allowed_slave = 0;
 
 struct cluster *tipc_cltr_create(u32 addr)
@@ -115,7 +115,7 @@ void tipc_cltr_delete(struct cluster *c_ptr)
 
 u32 tipc_cltr_next_node(struct cluster *c_ptr, u32 addr)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 n_num = tipc_node(addr) + 1;
 
 	if (!c_ptr)
@@ -133,7 +133,7 @@ u32 tipc_cltr_next_node(struct cluster *c_ptr, u32 addr)
 	return 0;
 }
 
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr)
+void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr)
 {
 	u32 n_num = tipc_node(n_ptr->addr);
 	u32 max_n_num = tipc_max_nodes;
@@ -196,7 +196,7 @@ u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref)
  * Uses deterministic and fair algorithm.
  */
 
-struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
+struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector)
 {
 	u32 n_num;
 	u32 mask = tipc_max_nodes;
@@ -379,7 +379,7 @@ void tipc_cltr_recv_routing_table(struct sk_buff *buf)
 {
 	struct tipc_msg *msg = buf_msg(buf);
 	struct cluster *c_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	unchar *node_table;
 	u32 table_size;
 	u32 router;
@@ -499,7 +499,7 @@ static void tipc_cltr_multicast(struct cluster *c_ptr, struct sk_buff *buf,
 			 u32 lower, u32 upper)
 {
 	struct sk_buff *buf_copy;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 n_num;
 	u32 tstop;
 
@@ -534,7 +534,7 @@ void tipc_cltr_broadcast(struct sk_buff *buf)
 {
 	struct sk_buff *buf_copy;
 	struct cluster *c_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 n_num;
 	u32 tstart;
 	u32 tstop;
diff --git a/net/tipc/cluster.h b/net/tipc/cluster.h
index 62df074afae..333efb0b9c4 100644
--- a/net/tipc/cluster.h
+++ b/net/tipc/cluster.h
@@ -54,24 +54,24 @@
 struct cluster {
 	u32 addr;
 	struct _zone *owner;
-	struct node **nodes;
+	struct tipc_node **nodes;
 	u32 highest_node;
 	u32 highest_slave;
 };
 
 
-extern struct node **tipc_local_nodes;
+extern struct tipc_node **tipc_local_nodes;
 extern u32 tipc_highest_allowed_slave;
-extern struct node_map tipc_cltr_bcast_nodes;
+extern struct tipc_node_map tipc_cltr_bcast_nodes;
 
 void tipc_cltr_remove_as_router(struct cluster *c_ptr, u32 router);
 void tipc_cltr_send_ext_routes(struct cluster *c_ptr, u32 dest);
-struct node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
+struct tipc_node *tipc_cltr_select_node(struct cluster *c_ptr, u32 selector);
 u32 tipc_cltr_select_router(struct cluster *c_ptr, u32 ref);
 void tipc_cltr_recv_routing_table(struct sk_buff *buf);
 struct cluster *tipc_cltr_create(u32 addr);
 void tipc_cltr_delete(struct cluster *c_ptr);
-void tipc_cltr_attach_node(struct cluster *c_ptr, struct node *n_ptr);
+void tipc_cltr_attach_node(struct cluster *c_ptr, struct tipc_node *n_ptr);
 void tipc_cltr_send_slave_routes(struct cluster *c_ptr, u32 dest);
 void tipc_cltr_broadcast(struct sk_buff *buf);
 int tipc_cltr_init(void);
diff --git a/net/tipc/discover.c b/net/tipc/discover.c
index 1657f0e795f..74b7d1e28ae 100644
--- a/net/tipc/discover.c
+++ b/net/tipc/discover.c
@@ -193,7 +193,7 @@ void tipc_disc_recv_msg(struct sk_buff *buf, struct bearer *b_ptr)
 		/* Always accept link here */
 		struct sk_buff *rbuf;
 		struct tipc_media_addr *addr;
-		struct node *n_ptr = tipc_node_find(orig);
+		struct tipc_node *n_ptr = tipc_node_find(orig);
 		int link_fully_up;
 
 		dbg(" in own cluster\n");
diff --git a/net/tipc/link.c b/net/tipc/link.c
index d60113ba4b1..dd4c18b9a35 100644
--- a/net/tipc/link.c
+++ b/net/tipc/link.c
@@ -1155,7 +1155,7 @@ int tipc_link_send_buf(struct link *l_ptr, struct sk_buff *buf)
 int tipc_link_send(struct sk_buff *buf, u32 dest, u32 selector)
 {
 	struct link *l_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	int res = -ELINKCONG;
 
 	read_lock_bh(&tipc_net_lock);
@@ -1226,7 +1226,7 @@ static int link_send_buf_fast(struct link *l_ptr, struct sk_buff *buf,
 int tipc_send_buf_fast(struct sk_buff *buf, u32 destnode)
 {
 	struct link *l_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	int res;
 	u32 selector = msg_origport(buf_msg(buf)) & 1;
 	u32 dummy;
@@ -1270,7 +1270,7 @@ int tipc_link_send_sections_fast(struct port *sender,
 	struct tipc_msg *hdr = &sender->publ.phdr;
 	struct link *l_ptr;
 	struct sk_buff *buf;
-	struct node *node;
+	struct tipc_node *node;
 	int res;
 	u32 selector = msg_origport(hdr) & 1;
 
@@ -1364,7 +1364,7 @@ static int link_send_sections_long(struct port *sender,
 				   u32 destaddr)
 {
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 	struct tipc_msg *hdr = &sender->publ.phdr;
 	u32 dsz = msg_data_sz(hdr);
 	u32 max_pkt,fragm_sz,rest;
@@ -1636,7 +1636,7 @@ void tipc_link_push_queue(struct link *l_ptr)
 
 static void link_reset_all(unsigned long addr)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	char addr_string[16];
 	u32 i;
 
@@ -1682,7 +1682,7 @@ static void link_retransmit_failure(struct link *l_ptr, struct sk_buff *buf)
 
 		/* Handle failure on broadcast link */
 
-		struct node *n_ptr;
+		struct tipc_node *n_ptr;
 		char addr_string[16];
 
 		tipc_printf(TIPC_OUTPUT, "Msg seq number: %u,  ", msg_seqno(msg));
@@ -1843,7 +1843,7 @@ void tipc_recv_msg(struct sk_buff *head, struct tipc_bearer *tb_ptr)
 	read_lock_bh(&tipc_net_lock);
 	while (head) {
 		struct bearer *b_ptr = (struct bearer *)tb_ptr;
-		struct node *n_ptr;
+		struct tipc_node *n_ptr;
 		struct link *l_ptr;
 		struct sk_buff *crs;
 		struct sk_buff *buf = head;
@@ -2935,7 +2935,7 @@ void tipc_link_set_queue_limits(struct link *l_ptr, u32 window)
  * Returns pointer to link (or 0 if invalid link name).
  */
 
-static struct link *link_find_link(const char *name, struct node **node)
+static struct link *link_find_link(const char *name, struct tipc_node **node)
 {
 	struct link_name link_name_parts;
 	struct bearer *b_ptr;
@@ -2965,7 +2965,7 @@ struct sk_buff *tipc_link_cmd_config(const void *req_tlv_area, int req_tlv_space
 	struct tipc_link_config *args;
 	u32 new_value;
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 	int res;
 
 	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_CONFIG))
@@ -3043,7 +3043,7 @@ struct sk_buff *tipc_link_cmd_reset_stats(const void *req_tlv_area, int req_tlv_
 {
 	char *link_name;
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 
 	if (!TLV_CHECK(req_tlv_area, req_tlv_space, TIPC_TLV_LINK_NAME))
 		return tipc_cfg_reply_error_string(TIPC_CFG_TLV_ERROR);
@@ -3091,7 +3091,7 @@ static int tipc_link_stats(const char *name, char *buf, const u32 buf_size)
 {
 	struct print_buf pb;
 	struct link *l_ptr;
-	struct node *node;
+	struct tipc_node *node;
 	char *status;
 	u32 profile_total = 0;
 
@@ -3207,7 +3207,7 @@ int link_control(const char *name, u32 op, u32 val)
 	int res = -EINVAL;
 	struct link *l_ptr;
 	u32 bearer_id;
-	struct node * node;
+	struct tipc_node * node;
 	u32 a;
 
 	a = link_name2addr(name, &bearer_id);
@@ -3249,7 +3249,7 @@ int link_control(const char *name, u32 op, u32 val)
 
 u32 tipc_link_get_max_pkt(u32 dest, u32 selector)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	struct link *l_ptr;
 	u32 res = MAX_PKT_DEFAULT;
 
diff --git a/net/tipc/link.h b/net/tipc/link.h
index 52f3e7c1871..6a51e38ad25 100644
--- a/net/tipc/link.h
+++ b/net/tipc/link.h
@@ -116,7 +116,7 @@ struct link {
 	char name[TIPC_MAX_LINK_NAME];
 	struct tipc_media_addr media_addr;
 	struct timer_list timer;
-	struct node *owner;
+	struct tipc_node *owner;
 	struct list_head link_list;
 
 	/* Management and link supervision data */
diff --git a/net/tipc/name_table.h b/net/tipc/name_table.h
index b9e7cd336d7..139882d4ed0 100644
--- a/net/tipc/name_table.h
+++ b/net/tipc/name_table.h
@@ -76,7 +76,7 @@ struct publication {
 	u32 node;
 	u32 ref;
 	u32 key;
-	struct node_subscr subscr;
+	struct tipc_node_subscr subscr;
 	struct list_head local_list;
 	struct list_head pport_list;
 	struct publication *node_list_next;
diff --git a/net/tipc/net.c b/net/tipc/net.c
index ec7b04fbdc4..7906608bf51 100644
--- a/net/tipc/net.c
+++ b/net/tipc/net.c
@@ -118,7 +118,7 @@
 DEFINE_RWLOCK(tipc_net_lock);
 struct network tipc_net = { NULL };
 
-struct node *tipc_net_select_remote_node(u32 addr, u32 ref)
+struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref)
 {
 	return tipc_zone_select_remote_node(tipc_net.zones[tipc_zone(addr)], addr, ref);
 }
diff --git a/net/tipc/net.h b/net/tipc/net.h
index d154ac2bda9..de2b9ad8f64 100644
--- a/net/tipc/net.h
+++ b/net/tipc/net.h
@@ -55,7 +55,7 @@ extern rwlock_t tipc_net_lock;
 void tipc_net_remove_as_router(u32 router);
 void tipc_net_send_external_routes(u32 dest);
 void tipc_net_route_msg(struct sk_buff *buf);
-struct node *tipc_net_select_remote_node(u32 addr, u32 ref);
+struct tipc_node *tipc_net_select_remote_node(u32 addr, u32 ref);
 u32 tipc_net_select_router(u32 addr, u32 ref);
 
 int tipc_net_start(u32 addr);
diff --git a/net/tipc/node.c b/net/tipc/node.c
index ee952ad6021..20d98c56e15 100644
--- a/net/tipc/node.c
+++ b/net/tipc/node.c
@@ -46,11 +46,11 @@
 #include "bearer.h"
 #include "name_distr.h"
 
-void node_print(struct print_buf *buf, struct node *n_ptr, char *str);
-static void node_lost_contact(struct node *n_ptr);
-static void node_established_contact(struct node *n_ptr);
+void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str);
+static void node_lost_contact(struct tipc_node *n_ptr);
+static void node_established_contact(struct tipc_node *n_ptr);
 
-struct node *tipc_nodes = NULL;	/* sorted list of nodes within cluster */
+struct tipc_node *tipc_nodes = NULL;	/* sorted list of nodes within cluster */
 
 static DEFINE_SPINLOCK(node_create_lock);
 
@@ -66,11 +66,11 @@ u32 tipc_own_tag = 0;
  * but this is a non-trivial change.)
  */
 
-struct node *tipc_node_create(u32 addr)
+struct tipc_node *tipc_node_create(u32 addr)
 {
 	struct cluster *c_ptr;
-	struct node *n_ptr;
-	struct node **curr_node;
+	struct tipc_node *n_ptr;
+	struct tipc_node **curr_node;
 
 	spin_lock_bh(&node_create_lock);
 
@@ -120,7 +120,7 @@ struct node *tipc_node_create(u32 addr)
 	return n_ptr;
 }
 
-void tipc_node_delete(struct node *n_ptr)
+void tipc_node_delete(struct tipc_node *n_ptr)
 {
 	if (!n_ptr)
 		return;
@@ -146,7 +146,7 @@ void tipc_node_delete(struct node *n_ptr)
  * Link becomes active (alone or shared) or standby, depending on its priority.
  */
 
-void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr)
 {
 	struct link **active = &n_ptr->active_links[0];
 
@@ -180,7 +180,7 @@ void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr)
  * node_select_active_links - select active link
  */
 
-static void node_select_active_links(struct node *n_ptr)
+static void node_select_active_links(struct tipc_node *n_ptr)
 {
 	struct link **active = &n_ptr->active_links[0];
 	u32 i;
@@ -208,7 +208,7 @@ static void node_select_active_links(struct node *n_ptr)
  * tipc_node_link_down - handle loss of link
  */
 
-void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr)
 {
 	struct link **active;
 
@@ -235,30 +235,30 @@ void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr)
 		node_lost_contact(n_ptr);
 }
 
-int tipc_node_has_active_links(struct node *n_ptr)
+int tipc_node_has_active_links(struct tipc_node *n_ptr)
 {
 	return (n_ptr &&
 		((n_ptr->active_links[0]) || (n_ptr->active_links[1])));
 }
 
-int tipc_node_has_redundant_links(struct node *n_ptr)
+int tipc_node_has_redundant_links(struct tipc_node *n_ptr)
 {
 	return (n_ptr->working_links > 1);
 }
 
-static int tipc_node_has_active_routes(struct node *n_ptr)
+static int tipc_node_has_active_routes(struct tipc_node *n_ptr)
 {
 	return (n_ptr && (n_ptr->last_router >= 0));
 }
 
-int tipc_node_is_up(struct node *n_ptr)
+int tipc_node_is_up(struct tipc_node *n_ptr)
 {
 	return (tipc_node_has_active_links(n_ptr) || tipc_node_has_active_routes(n_ptr));
 }
 
-struct node *tipc_node_attach_link(struct link *l_ptr)
+struct tipc_node *tipc_node_attach_link(struct link *l_ptr)
 {
-	struct node *n_ptr = tipc_node_find(l_ptr->addr);
+	struct tipc_node *n_ptr = tipc_node_find(l_ptr->addr);
 
 	if (!n_ptr)
 		n_ptr = tipc_node_create(l_ptr->addr);
@@ -285,7 +285,7 @@ struct node *tipc_node_attach_link(struct link *l_ptr)
 	return NULL;
 }
 
-void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr)
+void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr)
 {
 	n_ptr->links[l_ptr->b_ptr->identity] = NULL;
 	tipc_net.zones[tipc_zone(l_ptr->addr)]->links--;
@@ -338,7 +338,7 @@ void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr)
  *
  */
 
-static void node_established_contact(struct node *n_ptr)
+static void node_established_contact(struct tipc_node *n_ptr)
 {
 	struct cluster *c_ptr;
 
@@ -384,10 +384,10 @@ static void node_established_contact(struct node *n_ptr)
 				  tipc_highest_allowed_slave);
 }
 
-static void node_lost_contact(struct node *n_ptr)
+static void node_lost_contact(struct tipc_node *n_ptr)
 {
 	struct cluster *c_ptr;
-	struct node_subscr *ns, *tns;
+	struct tipc_node_subscr *ns, *tns;
 	char addr_string[16];
 	u32 i;
 
@@ -466,9 +466,9 @@ static void node_lost_contact(struct node *n_ptr)
  * Called by when cluster local lookup has failed.
  */
 
-struct node *tipc_node_select_next_hop(u32 addr, u32 selector)
+struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 router_addr;
 
 	if (!tipc_addr_domain_valid(addr))
@@ -513,7 +513,7 @@ struct node *tipc_node_select_next_hop(u32 addr, u32 selector)
  * Uses a deterministic and fair algorithm for selecting router node.
  */
 
-u32 tipc_node_select_router(struct node *n_ptr, u32 ref)
+u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref)
 {
 	u32 ulim;
 	u32 mask;
@@ -551,7 +551,7 @@ u32 tipc_node_select_router(struct node *n_ptr, u32 ref)
 	return tipc_addr(own_zone(), own_cluster(), r);
 }
 
-void tipc_node_add_router(struct node *n_ptr, u32 router)
+void tipc_node_add_router(struct tipc_node *n_ptr, u32 router)
 {
 	u32 r_num = tipc_node(router);
 
@@ -562,7 +562,7 @@ void tipc_node_add_router(struct node *n_ptr, u32 router)
 	       !n_ptr->routers[n_ptr->last_router]);
 }
 
-void tipc_node_remove_router(struct node *n_ptr, u32 router)
+void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router)
 {
 	u32 r_num = tipc_node(router);
 
@@ -580,7 +580,7 @@ void tipc_node_remove_router(struct node *n_ptr, u32 router)
 }
 
 #if 0
-void node_print(struct print_buf *buf, struct node *n_ptr, char *str)
+void node_print(struct print_buf *buf, struct tipc_node *n_ptr, char *str)
 {
 	u32 i;
 
@@ -597,7 +597,7 @@ void node_print(struct print_buf *buf, struct node *n_ptr, char *str)
 
 u32 tipc_available_nodes(const u32 domain)
 {
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 cnt = 0;
 
 	read_lock_bh(&tipc_net_lock);
@@ -615,7 +615,7 @@ struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space)
 {
 	u32 domain;
 	struct sk_buff *buf;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	struct tipc_node_info node_info;
 	u32 payload_size;
 
@@ -667,7 +667,7 @@ struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space)
 {
 	u32 domain;
 	struct sk_buff *buf;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	struct tipc_link_info link_info;
 	u32 payload_size;
 
diff --git a/net/tipc/node.h b/net/tipc/node.h
index cd1882654bb..6f990da5d14 100644
--- a/net/tipc/node.h
+++ b/net/tipc/node.h
@@ -43,7 +43,7 @@
 #include "bearer.h"
 
 /**
- * struct node - TIPC node structure
+ * struct tipc_node - TIPC node structure
  * @addr: network address of node
  * @lock: spinlock governing access to structure
  * @owner: pointer to cluster that node belongs to
@@ -68,11 +68,11 @@
  *    @defragm: list of partially reassembled b'cast message fragments from node
  */
 
-struct node {
+struct tipc_node {
 	u32 addr;
 	spinlock_t lock;
 	struct cluster *owner;
-	struct node *next;
+	struct tipc_node *next;
 	struct list_head nsub;
 	struct link *active_links[2];
 	struct link *links[MAX_BEARERS];
@@ -94,26 +94,26 @@ struct node {
 	} bclink;
 };
 
-extern struct node *tipc_nodes;
+extern struct tipc_node *tipc_nodes;
 extern u32 tipc_own_tag;
 
-struct node *tipc_node_create(u32 addr);
-void tipc_node_delete(struct node *n_ptr);
-struct node *tipc_node_attach_link(struct link *l_ptr);
-void tipc_node_detach_link(struct node *n_ptr, struct link *l_ptr);
-void tipc_node_link_down(struct node *n_ptr, struct link *l_ptr);
-void tipc_node_link_up(struct node *n_ptr, struct link *l_ptr);
-int tipc_node_has_active_links(struct node *n_ptr);
-int tipc_node_has_redundant_links(struct node *n_ptr);
-u32 tipc_node_select_router(struct node *n_ptr, u32 ref);
-struct node *tipc_node_select_next_hop(u32 addr, u32 selector);
-int tipc_node_is_up(struct node *n_ptr);
-void tipc_node_add_router(struct node *n_ptr, u32 router);
-void tipc_node_remove_router(struct node *n_ptr, u32 router);
+struct tipc_node *tipc_node_create(u32 addr);
+void tipc_node_delete(struct tipc_node *n_ptr);
+struct tipc_node *tipc_node_attach_link(struct link *l_ptr);
+void tipc_node_detach_link(struct tipc_node *n_ptr, struct link *l_ptr);
+void tipc_node_link_down(struct tipc_node *n_ptr, struct link *l_ptr);
+void tipc_node_link_up(struct tipc_node *n_ptr, struct link *l_ptr);
+int tipc_node_has_active_links(struct tipc_node *n_ptr);
+int tipc_node_has_redundant_links(struct tipc_node *n_ptr);
+u32 tipc_node_select_router(struct tipc_node *n_ptr, u32 ref);
+struct tipc_node *tipc_node_select_next_hop(u32 addr, u32 selector);
+int tipc_node_is_up(struct tipc_node *n_ptr);
+void tipc_node_add_router(struct tipc_node *n_ptr, u32 router);
+void tipc_node_remove_router(struct tipc_node *n_ptr, u32 router);
 struct sk_buff *tipc_node_get_links(const void *req_tlv_area, int req_tlv_space);
 struct sk_buff *tipc_node_get_nodes(const void *req_tlv_area, int req_tlv_space);
 
-static inline struct node *tipc_node_find(u32 addr)
+static inline struct tipc_node *tipc_node_find(u32 addr)
 {
 	if (likely(in_own_cluster(addr)))
 		return tipc_local_nodes[tipc_node(addr)];
@@ -126,19 +126,19 @@ static inline struct node *tipc_node_find(u32 addr)
 	return NULL;
 }
 
-static inline struct node *tipc_node_select(u32 addr, u32 selector)
+static inline struct tipc_node *tipc_node_select(u32 addr, u32 selector)
 {
 	if (likely(in_own_cluster(addr)))
 		return tipc_local_nodes[tipc_node(addr)];
 	return tipc_node_select_next_hop(addr, selector);
 }
 
-static inline void tipc_node_lock(struct node *n_ptr)
+static inline void tipc_node_lock(struct tipc_node *n_ptr)
 {
 	spin_lock_bh(&n_ptr->lock);
 }
 
-static inline void tipc_node_unlock(struct node *n_ptr)
+static inline void tipc_node_unlock(struct tipc_node *n_ptr)
 {
 	spin_unlock_bh(&n_ptr->lock);
 }
diff --git a/net/tipc/node_subscr.c b/net/tipc/node_subscr.c
index 8ecbd0fb610..19194d476a9 100644
--- a/net/tipc/node_subscr.c
+++ b/net/tipc/node_subscr.c
@@ -44,7 +44,7 @@
  * tipc_nodesub_subscribe - create "node down" subscription for specified node
  */
 
-void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
+void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr,
 		       void *usr_handle, net_ev_handler handle_down)
 {
 	if (addr == tipc_own_addr) {
@@ -69,7 +69,7 @@ void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
  * tipc_nodesub_unsubscribe - cancel "node down" subscription (if any)
  */
 
-void tipc_nodesub_unsubscribe(struct node_subscr *node_sub)
+void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub)
 {
 	if (!node_sub->node)
 		return;
diff --git a/net/tipc/node_subscr.h b/net/tipc/node_subscr.h
index 5f3f5859b84..006ed739f51 100644
--- a/net/tipc/node_subscr.h
+++ b/net/tipc/node_subscr.h
@@ -42,22 +42,22 @@
 typedef void (*net_ev_handler) (void *usr_handle);
 
 /**
- * struct node_subscr - "node down" subscription entry
+ * struct tipc_node_subscr - "node down" subscription entry
  * @node: ptr to node structure of interest (or NULL, if none)
  * @handle_node_down: routine to invoke when node fails
  * @usr_handle: argument to pass to routine when node fails
  * @nodesub_list: adjacent entries in list of subscriptions for the node
  */
 
-struct node_subscr {
-	struct node *node;
+struct tipc_node_subscr {
+	struct tipc_node *node;
 	net_ev_handler handle_node_down;
 	void *usr_handle;
 	struct list_head nodesub_list;
 };
 
-void tipc_nodesub_subscribe(struct node_subscr *node_sub, u32 addr,
+void tipc_nodesub_subscribe(struct tipc_node_subscr *node_sub, u32 addr,
 			    void *usr_handle, net_ev_handler handle_down);
-void tipc_nodesub_unsubscribe(struct node_subscr *node_sub);
+void tipc_nodesub_unsubscribe(struct tipc_node_subscr *node_sub);
 
 #endif
diff --git a/net/tipc/port.h b/net/tipc/port.h
index e5f8c16429b..ff31ee4a1dc 100644
--- a/net/tipc/port.h
+++ b/net/tipc/port.h
@@ -105,7 +105,7 @@ struct port {
 	u32 probing_interval;
 	u32 last_in_seqno;
 	struct timer_list timer;
-	struct node_subscr subscription;
+	struct tipc_node_subscr subscription;
 };
 
 extern spinlock_t tipc_port_list_lock;
diff --git a/net/tipc/zone.c b/net/tipc/zone.c
index 3506f856344..2c01ba2d86b 100644
--- a/net/tipc/zone.c
+++ b/net/tipc/zone.c
@@ -111,10 +111,10 @@ void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest)
 	}
 }
 
-struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
+struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref)
 {
 	struct cluster *c_ptr;
-	struct node *n_ptr;
+	struct tipc_node *n_ptr;
 	u32 c_num;
 
 	if (!z_ptr)
diff --git a/net/tipc/zone.h b/net/tipc/zone.h
index 6e7a08df8af..7bdc3406ba9 100644
--- a/net/tipc/zone.h
+++ b/net/tipc/zone.h
@@ -54,7 +54,7 @@ struct _zone {
 	u32 links;
 };
 
-struct node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
+struct tipc_node *tipc_zone_select_remote_node(struct _zone *z_ptr, u32 addr, u32 ref);
 u32 tipc_zone_select_router(struct _zone *z_ptr, u32 addr, u32 ref);
 void tipc_zone_remove_as_router(struct _zone *z_ptr, u32 router);
 void tipc_zone_send_external_routes(struct _zone *z_ptr, u32 dest);
-- 
GitLab


From e5bd1c3fdd06b6c0fa6dfb98ce31cea1820ce4e9 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 3 Sep 2008 02:14:39 -0700
Subject: [PATCH 651/869] sparc64: Fix IPI call locking.

When I switched sparc64 over to the generic helpers for
smp_call_function(), I didn't convert the dinky call_lock
we had.

Use ipi_call_lock() and ipi_call_unlock().

Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/kernel/smp.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 743ccad61c6..0712a445f98 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -80,8 +80,6 @@ void smp_bogo(struct seq_file *m)
 			   i, cpu_data(i).clock_tick);
 }
 
-static __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
-
 extern void setup_sparc64_timer(void);
 
 static volatile unsigned long callin_flag = 0;
@@ -120,9 +118,9 @@ void __cpuinit smp_callin(void)
 	while (!cpu_isset(cpuid, smp_commenced_mask))
 		rmb();
 
-	spin_lock(&call_lock);
+	ipi_call_lock();
 	cpu_set(cpuid, cpu_online_map);
-	spin_unlock(&call_lock);
+	ipi_call_unlock();
 
 	/* idle thread is expected to have preempt disabled */
 	preempt_disable();
@@ -1305,9 +1303,9 @@ int __cpu_disable(void)
 	c->core_id = 0;
 	c->proc_id = -1;
 
-	spin_lock(&call_lock);
+	ipi_call_lock();
 	cpu_clear(cpu, cpu_online_map);
-	spin_unlock(&call_lock);
+	ipi_call_unlock();
 
 	smp_wmb();
 
-- 
GitLab


From 69114a47af524badc73de8fc86959941a03f0600 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 3 Sep 2008 10:15:26 +0100
Subject: [PATCH 652/869] [ARM] omap: fix gpio.c build error

arch/arm/plat-omap/gpio.c: In function '_omap_gpio_init':
arch/arm/plat-omap/gpio.c:1492: error: 'omap_mpuio_device' undeclared (first use in this function)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-omap/gpio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 3e76ee2bc73..9e1341ebc14 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1488,7 +1488,7 @@ static int __init _omap_gpio_init(void)
 		bank->chip.set = gpio_set;
 		if (bank_is_mpuio(bank)) {
 			bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP1
+#ifdef CONFIG_ARCH_OMAP16XX
 			bank->chip.dev = &omap_mpuio_device.dev;
 #endif
 			bank->chip.base = OMAP_MPUIO(0);
-- 
GitLab


From 4d084617fb0d025c42c242362d1f27d337e2d407 Mon Sep 17 00:00:00 2001
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Date: Wed, 3 Sep 2008 02:15:30 -0700
Subject: [PATCH 653/869] sparc64: Prevent sparc64 from invoking irq handlers
 on offline CPUs

Make sparc64 refrain from clearing a given to-be-offlined CPU's bit in the
cpu_online_mask until it has processed pending irqs.  This change
prevents other CPUs from being blindsided by an apparently offline CPU
nevertheless changing globally visible state.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 arch/sparc64/kernel/smp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 0712a445f98..2be166c544c 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -1303,10 +1303,6 @@ int __cpu_disable(void)
 	c->core_id = 0;
 	c->proc_id = -1;
 
-	ipi_call_lock();
-	cpu_clear(cpu, cpu_online_map);
-	ipi_call_unlock();
-
 	smp_wmb();
 
 	/* Make sure no interrupts point to this cpu.  */
@@ -1316,6 +1312,10 @@ int __cpu_disable(void)
 	mdelay(1);
 	local_irq_disable();
 
+	ipi_call_lock();
+	cpu_clear(cpu, cpu_online_map);
+	ipi_call_unlock();
+
 	return 0;
 }
 
-- 
GitLab


From 78fbc824ed8225edd80cdc57771d5ca4f7aae95e Mon Sep 17 00:00:00 2001
From: Michael Neuling <mikey@neuling.org>
Date: Thu, 28 Aug 2008 14:57:39 +1000
Subject: [PATCH 654/869] powerpc: Fix uninitialised variable in VSX alignment
 code

This fixes an uninitialised variable in the VSX alignment code.  It can
cause warnings from GCC (noticed with gcc-4.1.1).  Gcc is actually
correct in this instance, and this bug could cause the alignment
interrupt handler to send a SIGSEGV to the process on a legitimate
access.

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/align.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index 367129789cc..5af4e9b2dbe 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -647,7 +647,7 @@ static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
 		       unsigned int flags, unsigned int length)
 {
 	char *ptr = (char *) &current->thread.TS_FPR(reg);
-	int ret;
+	int ret = 0;
 
 	flush_vsx_to_thread(current);
 
-- 
GitLab


From 9e88ba4e45ecad2425c4cc4e0861a26f4e36c6da Mon Sep 17 00:00:00 2001
From: Paul Mackerras <paulus@samba.org>
Date: Sat, 30 Aug 2008 11:26:27 +1000
Subject: [PATCH 655/869] powerpc: Only make kernel text pages of linear
 mapping executable

Commit bc033b63bbfeb6c4b4eb0a1d083c650e4a0d2af8 ("powerpc/mm: Fix
attribute confusion with htab_bolt_mapping()") moved the check for
whether we should make pages of the linear mapping executable from
htab_bolt_mapping into its callers, including htab_initialize.
A side-effect of this is that the decision is now made once for
each contiguous section in the LMB array rather than for each page
individually.  This can often mean that the whole of the linear
mapping ends up being executable.

This reverts to the previous behaviour, where individual pages are
checked for being part of the kernel text or not, by moving the check
back down into htab_bolt_mapping.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/mm/hash_utils_64.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 14be408dfc9..8920eea3452 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -191,12 +191,17 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 		unsigned long hash, hpteg;
 		unsigned long vsid = get_kernel_vsid(vaddr, ssize);
 		unsigned long va = hpt_va(vaddr, vsid, ssize);
+		unsigned long tprot = prot;
+
+		/* Make kernel text executable */
+		if (in_kernel_text(vaddr))
+			tprot &= ~HPTE_R_N;
 
 		hash = hpt_hash(va, shift, ssize);
 		hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
 
 		BUG_ON(!ppc_md.hpte_insert);
-		ret = ppc_md.hpte_insert(hpteg, va, paddr, prot,
+		ret = ppc_md.hpte_insert(hpteg, va, paddr, tprot,
 					 HPTE_V_BOLTED, psize, ssize);
 
 		if (ret < 0)
@@ -584,7 +589,7 @@ void __init htab_initialize(void)
 {
 	unsigned long table;
 	unsigned long pteg_count;
-	unsigned long prot, tprot;
+	unsigned long prot;
 	unsigned long base = 0, size = 0, limit;
 	int i;
 
@@ -660,10 +665,9 @@ void __init htab_initialize(void)
 	for (i=0; i < lmb.memory.cnt; i++) {
 		base = (unsigned long)__va(lmb.memory.region[i].base);
 		size = lmb.memory.region[i].size;
-		tprot = prot | (in_kernel_text(base) ? _PAGE_EXEC : 0);
 
 		DBG("creating mapping for region: %lx..%lx (prot: %x)\n",
-		    base, size, tprot);
+		    base, size, prot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
@@ -680,21 +684,21 @@ void __init htab_initialize(void)
 			unsigned long dart_table_end = dart_tablebase + 16 * MB;
 			if (base != dart_tablebase)
 				BUG_ON(htab_bolt_mapping(base, dart_tablebase,
-							__pa(base), tprot,
+							__pa(base), prot,
 							mmu_linear_psize,
 							mmu_kernel_ssize));
 			if ((base + size) > dart_table_end)
 				BUG_ON(htab_bolt_mapping(dart_tablebase+16*MB,
 							base + size,
 							__pa(dart_table_end),
-							 tprot,
+							 prot,
 							 mmu_linear_psize,
 							 mmu_kernel_ssize));
 			continue;
 		}
 #endif /* CONFIG_U3_DART */
 		BUG_ON(htab_bolt_mapping(base, base + size, __pa(base),
-				tprot, mmu_linear_psize, mmu_kernel_ssize));
+				prot, mmu_linear_psize, mmu_kernel_ssize));
        }
 
 	/*
-- 
GitLab


From 303996dace16894710a5291327eeb79afdb8ed12 Mon Sep 17 00:00:00 2001
From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Tue, 2 Sep 2008 15:04:09 +1000
Subject: [PATCH 656/869] powerpc: Make sure _etext is after all kernel text

This makes core_kernel_text() (and therefore kernel_text_address())
return the correct result.  Currently all the __devinit routines (at
least) will not be considered to be kernel text.

This is just a quick fix for 2.6.27 - hopefully we will be able to fix
this better in 2.6.28.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/vmlinux.lds.S | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 4a8ce62fe11..9f6c1ca1739 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -66,11 +66,12 @@ SECTIONS
 		__got2_end = .;
 #endif /* CONFIG_PPC32 */
 
-		. = ALIGN(PAGE_SIZE);
-		_etext = .;
-		PROVIDE32 (etext = .);
 	} :kernel
 
+	. = ALIGN(PAGE_SIZE);
+	_etext = .;
+	PROVIDE32 (etext = .);
+
 	/* Read-only data */
 	RODATA
 
-- 
GitLab


From 7563dc64585324f443f5ac107eb6d89ee813a2d2 Mon Sep 17 00:00:00 2001
From: Tony Breeds <tony@bakeyournoodle.com>
Date: Tue, 2 Sep 2008 16:50:38 +1000
Subject: [PATCH 657/869] powerpc: Work around gcc's -fno-omit-frame-pointer
 bug

This bug is causing random crashes
(http://bugzilla.kernel.org/show_bug.cgi?id=11414).

-fno-omit-frame-pointer is only needed on powerpc when -pg is also
supplied, and there is a gcc bug that causes incorrect code generation
on 32-bit powerpc when -fno-omit-frame-pointer is used---it uses stack
locations below the stack pointer, which is not allowed by the ABI
because those locations can and sometimes do get corrupted by an
interrupt.

This ensures that CONFIG_FRAME_POINTER is only selected by ftrace.
When CONFIG_FTRACE is enabled we also pass -mno-sched-epilog to work
around the gcc codegen bug.

Patch based on work by:
	Andreas Schwab <schwab@suse.de>
	Segher Boessenkool <segher@kernel.crashing.org>

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/Makefile                    | 5 +++++
 arch/powerpc/kernel/Makefile             | 7 ++++---
 arch/powerpc/platforms/powermac/Makefile | 2 +-
 lib/Kconfig.debug                        | 6 +++---
 4 files changed, 13 insertions(+), 7 deletions(-)

diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 9155c9312c1..c6be19e9cea 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -116,6 +116,11 @@ ifeq ($(CONFIG_6xx),y)
 KBUILD_CFLAGS		+= -mcpu=powerpc
 endif
 
+# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
+ifeq ($(CONFIG_FTRACE),y)
+KBUILD_CFLAGS		+= -mno-sched-epilog
+endif
+
 cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
 cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
 cpu-as-$(CONFIG_POWER4)		+= -Wa,-maltivec
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 64f5948ebc9..946daea780f 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -14,12 +14,13 @@ endif
 
 ifdef CONFIG_FTRACE
 # Do not trace early boot code
-CFLAGS_REMOVE_cputable.o = -pg
-CFLAGS_REMOVE_prom_init.o = -pg
+CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
 
 ifdef CONFIG_DYNAMIC_FTRACE
 # dynamic ftrace setup.
-CFLAGS_REMOVE_ftrace.o = -pg
+CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
 endif
 
 endif
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 58ecdd72630..be60d64be7a 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -2,7 +2,7 @@ CFLAGS_bootx_init.o  		+= -fPIC
 
 ifdef CONFIG_FTRACE
 # Do not trace early boot code
-CFLAGS_REMOVE_bootx_init.o = -pg
+CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog
 endif
 
 obj-y				+= pic.o setup.o time.o feature.o pci.o \
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 8b5a7d304a5..0b504814e37 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -394,7 +394,7 @@ config LOCKDEP
 	bool
 	depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
 	select STACKTRACE
-	select FRAME_POINTER if !X86 && !MIPS
+	select FRAME_POINTER if !X86 && !MIPS && !PPC
 	select KALLSYMS
 	select KALLSYMS_ALL
 
@@ -676,13 +676,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER
 	depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
 	depends on !X86_64
 	select STACKTRACE
-	select FRAME_POINTER
+	select FRAME_POINTER if !PPC
 	help
 	  Provide stacktrace filter for fault-injection capabilities
 
 config LATENCYTOP
 	bool "Latency measuring infrastructure"
-	select FRAME_POINTER if !MIPS
+	select FRAME_POINTER if !MIPS && !PPC
 	select KALLSYMS
 	select KALLSYMS_ALL
 	select STACKTRACE
-- 
GitLab


From 94ee815c05c9387931e549d83312d30009ed86e9 Mon Sep 17 00:00:00 2001
From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date: Wed, 3 Sep 2008 13:12:05 +1000
Subject: [PATCH 658/869] powerpc: Fix build error with 64K pages and
 !hugetlbfs

HAVE_ARCH_UNMAPPED_AREA and HAVE_ARCH_UNMAPPED_AREA_TOPDOWN must
be defined whenever CONFIG_PPC_MM_SLICES is enabled, not just when
CONFIG_HUGETLB_PAGE is.  They used to be always defined together but
this is no longer the case since 3a8247cc2c856930f34eafce33f6a039227ee175
("powerpc: Only demote individual slices rather than whole process").

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/include/asm/pgtable-ppc64.h | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index db0b8f3b880..4597c491e9b 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -153,12 +153,10 @@
 #define __S110	PAGE_SHARED_X
 #define __S111	PAGE_SHARED_X
 
-#ifdef CONFIG_HUGETLB_PAGE
-
+#ifdef CONFIG_PPC_MM_SLICES
 #define HAVE_ARCH_UNMAPPED_AREA
 #define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
-
-#endif
+#endif /* CONFIG_PPC_MM_SLICES */
 
 #ifndef __ASSEMBLY__
 
-- 
GitLab


From 7888bc2b4778fda267a6e6422c4497dba865a47a Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@kernel.crashing.org>
Date: Tue, 26 Aug 2008 12:08:56 +1000
Subject: [PATCH 659/869] powerpc: Fix for getting CPU number in
 power_save_ppc32_restore()

The calculation to get TI_CPU based off of SPRG3 was just plain wrong,
meaning that we were getting garbage for the CPU number on 6xx/G3/G4
based SMP boxes in this code.

Just offset off the stack pointer (to get to thread_info) like all the
other references to TI_CPU do.

This was pointed out by Chen Gong <G.Chen@freescale.com>

[paulus@samba.org - use rlwinm r12,r11,... instead of
 rlwinm r12,r1,...; tophys()]

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/kernel/idle_6xx.S  | 2 +-
 arch/powerpc/kernel/idle_e500.S | 3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 019b02d8844..15c611de1ee 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -158,7 +158,7 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	mfspr	r12,SPRN_SPRG3
+	rlwinm	r12,r11,0,0,31-THREAD_SHIFT
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
index 06304034b39..47a1a983ff8 100644
--- a/arch/powerpc/kernel/idle_e500.S
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -84,10 +84,11 @@ _GLOBAL(power_save_ppc32_restore)
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
 #ifdef CONFIG_SMP
-	mfspr	r12,SPRN_SPRG3
+	rlwinm	r12,r1,0,0,31-THREAD_SHIFT
 	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
 	slwi	r11,r11,2
 #else
 	li	r11,0
 #endif
+
 	b	transfer_to_handler_cont
-- 
GitLab


From 7c7cbadf7341a0792879c67d6e3020f040d6cd7f Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 3 Sep 2008 14:16:42 +0300
Subject: [PATCH 660/869] UBIFS: amend f_fsid

David Woodhouse suggested to be consistent with other FSes
and xor the beginning and the end of the UUID.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/super.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 0dee4042c6c..7562464ac83 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -370,6 +370,7 @@ static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf)
 {
 	struct ubifs_info *c = dentry->d_sb->s_fs_info;
 	unsigned long long free;
+	__le32 *uuid = (__le32 *)c->uuid;
 
 	free = ubifs_get_free_space(c);
 	dbg_gen("free space %lld bytes (%lld blocks)",
@@ -386,8 +387,8 @@ static int ubifs_statfs(struct dentry *dentry, struct kstatfs *buf)
 	buf->f_files = 0;
 	buf->f_ffree = 0;
 	buf->f_namelen = UBIFS_MAX_NLEN;
-	memcpy(&buf->f_fsid, c->uuid, sizeof(__kernel_fsid_t));
-
+	buf->f_fsid.val[0] = le32_to_cpu(uuid[0]) ^ le32_to_cpu(uuid[2]);
+	buf->f_fsid.val[1] = le32_to_cpu(uuid[1]) ^ le32_to_cpu(uuid[3]);
 	return 0;
 }
 
-- 
GitLab


From e000ea13123a28108cff2d6b9856b414dfdcd1fa Mon Sep 17 00:00:00 2001
From: David Brownell <dbrownell@users.sourceforge.net>
Date: Tue, 2 Sep 2008 11:34:24 -0700
Subject: [PATCH 661/869] net/usb/pegasus: avoid hundreds of diagnostics

Make the "pegasus" driver scream less loudly in the face of
problems as it initializes, avoiding hundreds of messages:

 - ratelimit some key error messages
 - avoid some spurious diagnostics caused by strange codeflow

And fix one instance of goofy indentation.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/usb/pegasus.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index a84ba487c71..8c19307e504 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -117,7 +117,7 @@ static void ctrl_callback(struct urb *urb)
 	case -ENOENT:
 		break;
 	default:
-		if (netif_msg_drv(pegasus))
+		if (netif_msg_drv(pegasus) && printk_ratelimit())
 			dev_dbg(&pegasus->intf->dev, "%s, status %d\n",
 				__FUNCTION__, urb->status);
 	}
@@ -166,7 +166,7 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
 		set_current_state(TASK_RUNNING);
 		if (ret == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
+		if (netif_msg_drv(pegasus) && printk_ratelimit())
 			dev_err(&pegasus->intf->dev, "%s, status %d\n",
 					__FUNCTION__, ret);
 		goto out;
@@ -275,7 +275,7 @@ static int set_register(pegasus_t * pegasus, __u16 indx, __u8 data)
 	if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
 		if (ret == -ENODEV)
 			netif_device_detach(pegasus->net);
-		if (netif_msg_drv(pegasus))
+		if (netif_msg_drv(pegasus) && printk_ratelimit())
 			dev_err(&pegasus->intf->dev, "%s, status %d\n",
 					__FUNCTION__, ret);
 		goto out;
@@ -1209,8 +1209,7 @@ static void pegasus_set_multicast(struct net_device *net)
 		pegasus->eth_regs[EthCtrl2] |= RX_PROMISCUOUS;
 		if (netif_msg_link(pegasus))
 			pr_info("%s: Promiscuous mode enabled.\n", net->name);
-	} else if (net->mc_count ||
-		   (net->flags & IFF_ALLMULTI)) {
+	} else if (net->mc_count || (net->flags & IFF_ALLMULTI)) {
 		pegasus->eth_regs[EthCtrl0] |= RX_MULTICAST;
 		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
 		if (netif_msg_link(pegasus))
@@ -1220,6 +1219,8 @@ static void pegasus_set_multicast(struct net_device *net)
 		pegasus->eth_regs[EthCtrl2] &= ~RX_PROMISCUOUS;
 	}
 
+	pegasus->ctrl_urb->status = 0;
+
 	pegasus->flags |= ETH_REGS_CHANGE;
 	ctrl_callback(pegasus->ctrl_urb);
 }
-- 
GitLab


From 15e79f24b60c4b0bf8019423bda4e03a576b02f2 Mon Sep 17 00:00:00 2001
From: Andy Gospodarek <andy@greyhouse.net>
Date: Wed, 27 Aug 2008 18:04:32 -0700
Subject: [PATCH 662/869] ixgbe: initialize interrupt throttle rate

This commit dropped the setting of the default interrupt throttle rate.

commit 021230d40ae0e6508d6c717b6e0d6d81cd77ac25
Author: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com>
Date:   Mon Mar 3 15:03:45 2008 -0800

    ixgbe: Introduce MSI-X queue vector code

The following patch adds it back.  Without this the default value of 0
causes the performance of this card to be awful.  Restoring these to the
default values yields much better performance.

This regression has been around since 2.6.25.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: stable@kernel.org [2.6.25 and later]
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/ixgbe/ixgbe_main.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 53f41b649f0..a417be7f8be 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2303,6 +2303,12 @@ static int __devinit ixgbe_set_interrupt_capability(struct ixgbe_adapter
 	int err = 0;
 	int vector, v_budget;
 
+	/*
+	 * Set the default interrupt throttle rate.
+	 */
+	adapter->rx_eitr = (1000000 / IXGBE_DEFAULT_ITR_RX_USECS);
+	adapter->tx_eitr = (1000000 / IXGBE_DEFAULT_ITR_TX_USECS);
+
 	/*
 	 * It's easy to be greedy for MSI-X vectors, but it really
 	 * doesn't do us much good if we have a lot more vectors
-- 
GitLab


From 2dcc9ff7efc701f76883356bdbaf1134039e5fa5 Mon Sep 17 00:00:00 2001
From: Komuro <komurojun-mbn@nifty.com>
Date: Sat, 30 Aug 2008 12:13:33 +0900
Subject: [PATCH 663/869] pcnet-cs, axnet_cs: add new IDs, remove dup ID with
 less info

pcnet_cs:
    add new ID: "corega Ether PCC-TD".
    remove duplicate ID: "IC-CARD".

axnet_cs:
    add new ID: "IO DATA ETXPCM".

Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/pcmcia/axnet_cs.c | 1 +
 drivers/net/pcmcia/pcnet_cs.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 3f682d49a4e..52bf11b73c6 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -784,6 +784,7 @@ static struct pcmcia_device_id axnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEther PCC-TXD", 0x5261440f, 0x436768c5),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FEtherII PCC-TXD", 0x5261440f, 0x730df72e),
 	PCMCIA_DEVICE_PROD_ID12("Dynalink", "L100C16", 0x55632fd5, 0x66bc2a90),
+	PCMCIA_DEVICE_PROD_ID12("IO DATA", "ETXPCM", 0x547e66dc, 0x233adac2),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V3)", 0x0733cc81, 0x232019a8),
 	PCMCIA_DEVICE_PROD_ID12("MELCO", "LPC3-TX", 0x481e0094, 0xf91af609),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "100BASE", 0x281f1c5d, 0x7c2add04),
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 2d4c4ad89b8..ebc1ae6bcbe 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -1626,6 +1626,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega EtherII PCC-TD", 0x5261440f, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("Corega K.K.", "corega EtherII PCC-TD", 0xd4fdcbd8, 0xc49bd73d),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-T", 0x5261440f, 0x6705fcaa),
+	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega Ether PCC-TD", 0x5261440f, 0x47d5ca83),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "corega FastEther PCC-TX", 0x5261440f, 0x485e85d9),
 	PCMCIA_DEVICE_PROD_ID12("Corega,K.K.", "Ethernet LAN Card", 0x110d26d9, 0x9fd2f0a2),
 	PCMCIA_DEVICE_PROD_ID12("corega,K.K.", "Ethernet LAN Card", 0x9791a90e, 0x9fd2f0a2),
@@ -1737,7 +1738,6 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID1("CyQ've 10 Base-T LAN CARD", 0x94faf360),
 	PCMCIA_DEVICE_PROD_ID1("EP-210 PCMCIA LAN CARD.", 0x8850b4de),
 	PCMCIA_DEVICE_PROD_ID1("ETHER-C16", 0x06a8514f),
-	PCMCIA_DEVICE_PROD_ID1("IC-CARD", 0x60cb09a6),
 	PCMCIA_DEVICE_PROD_ID1("NE2000 Compatible", 0x75b8ad5a),
 	PCMCIA_DEVICE_PROD_ID2("EN-6200P2", 0xa996d078),
 	/* too generic! */
-- 
GitLab


From 0b62afb432d807482a6808508112d1baf29f3798 Mon Sep 17 00:00:00 2001
From: Dhananjay Phadke <dhananjay@netxen.com>
Date: Wed, 27 Aug 2008 21:57:30 -0700
Subject: [PATCH 664/869] netxen: Remove workaround for chipset quirk

Remove chipset-specific quirk workaround; the workaround caused
unrecoverable DMA lockups when the driver was loaded following a
PXE boot.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Michael Brown <mbrown@fensystems.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/net/netxen/netxen_nic_main.c | 10 ----------
 1 file changed, 10 deletions(-)

diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 32bb47adbe3..008fd6618a5 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -359,16 +359,6 @@ static void netxen_pcie_strap_init(struct netxen_adapter *adapter)
 	int i, pos;
 	struct pci_dev *pdev;
 
-	pdev = pci_get_device(0x1166, 0x0140, NULL);
-	if (pdev) {
-		pci_dev_put(pdev);
-		adapter->hw_read_wx(adapter,
-			NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
-		chicken |= 0x4000;
-		adapter->hw_write_wx(adapter,
-			NETXEN_PCIE_REG(PCIE_TGT_SPLIT_CHICKEN), &chicken, 4);
-	}
-
 	pdev = adapter->pdev;
 
 	adapter->hw_read_wx(adapter,
-- 
GitLab


From ec0c15afb41fd9ad45b53468b60db50170e22346 Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed, 3 Sep 2008 07:30:13 -0700
Subject: [PATCH 665/869] Split up PIT part of TSC calibration from
 native_calibrate_tsc

The TSC calibration function is still very complicated, but this makes
it at least a little bit less so by moving the PIT part out into a
helper function of its own.

Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-of-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/tsc.c | 132 +++++++++++++++++++++++-------------------
 1 file changed, 71 insertions(+), 61 deletions(-)

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index ac79bd143da..346cae5ac42 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -122,15 +122,75 @@ static u64 tsc_read_refs(u64 *pm, u64 *hpet)
 	return ULLONG_MAX;
 }
 
+/*
+ * Try to calibrate the TSC against the Programmable
+ * Interrupt Timer and return the frequency of the TSC
+ * in kHz.
+ *
+ * Return ULONG_MAX on failure to calibrate.
+ */
+static unsigned long pit_calibrate_tsc(void)
+{
+	u64 tsc, t1, t2, delta;
+	unsigned long tscmin, tscmax;
+	int pitcnt;
+
+	/* Set the Gate high, disable speaker */
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	/*
+	 * Setup CTC channel 2* for mode 0, (interrupt on terminal
+	 * count mode), binary count. Set the latch register to 50ms
+	 * (LSB then MSB) to begin countdown.
+	 */
+	outb(0xb0, 0x43);
+	outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
+	outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
+
+	tsc = t1 = t2 = get_cycles();
+
+	pitcnt = 0;
+	tscmax = 0;
+	tscmin = ULONG_MAX;
+	while ((inb(0x61) & 0x20) == 0) {
+		t2 = get_cycles();
+		delta = t2 - tsc;
+		tsc = t2;
+		if ((unsigned long) delta < tscmin)
+			tscmin = (unsigned int) delta;
+		if ((unsigned long) delta > tscmax)
+			tscmax = (unsigned int) delta;
+		pitcnt++;
+	}
+
+	/*
+	 * Sanity checks:
+	 *
+	 * If we were not able to read the PIT more than 5000
+	 * times, then we have been hit by a massive SMI
+	 *
+	 * If the maximum is 10 times larger than the minimum,
+	 * then we got hit by an SMI as well.
+	 */
+	if (pitcnt < 5000 || tscmax > 10 * tscmin)
+		return ULONG_MAX;
+
+	/* Calculate the PIT value */
+	delta = t2 - t1;
+	do_div(delta, 50);
+	return delta;
+}
+
+
 /**
  * native_calibrate_tsc - calibrate the tsc on boot
  */
 unsigned long native_calibrate_tsc(void)
 {
-	u64 tsc1, tsc2, tr1, tr2, tsc, delta, pm1, pm2, hpet1, hpet2;
+	u64 tsc1, tsc2, delta, pm1, pm2, hpet1, hpet2;
 	unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
-	unsigned long flags, tscmin, tscmax;
-	int hpet = is_hpet_enabled(), pitcnt, i;
+	unsigned long flags;
+	int hpet = is_hpet_enabled(), i;
 
 	/*
 	 * Run 5 calibration loops to get the lowest frequency value
@@ -157,72 +217,22 @@ unsigned long native_calibrate_tsc(void)
 	 * amount of time anyway.
 	 */
 	for (i = 0; i < 5; i++) {
-
-		tscmin = ULONG_MAX;
-		tscmax = 0;
-		pitcnt = 0;
-
-		local_irq_save(flags);
+		unsigned long tsc_pit_khz;
 
 		/*
 		 * Read the start value and the reference count of
-		 * hpet/pmtimer when available:
+		 * hpet/pmtimer when available. Then do the PIT
+		 * calibration, which will take at least 50ms, and
+		 * read the end value.
 		 */
+		local_irq_save(flags);
 		tsc1 = tsc_read_refs(&pm1, hpet ? &hpet1 : NULL);
-
-		/* Set the Gate high, disable speaker */
-		outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
-		/*
-		 * Setup CTC channel 2* for mode 0, (interrupt on terminal
-		 * count mode), binary count. Set the latch register to 50ms
-		 * (LSB then MSB) to begin countdown.
-		 *
-		 * Some devices need a delay here.
-		 */
-		outb(0xb0, 0x43);
-		outb((CLOCK_TICK_RATE / (1000 / 50)) & 0xff, 0x42);
-		outb((CLOCK_TICK_RATE / (1000 / 50)) >> 8, 0x42);
-
-		tsc = tr1 = tr2 = get_cycles();
-
-		while ((inb(0x61) & 0x20) == 0) {
-			tr2 = get_cycles();
-			delta = tr2 - tsc;
-			tsc = tr2;
-			if ((unsigned int) delta < tscmin)
-				tscmin = (unsigned int) delta;
-			if ((unsigned int) delta > tscmax)
-				tscmax = (unsigned int) delta;
-			pitcnt++;
-		}
-
-		/*
-		 * We waited at least 50ms above. Now read
-		 * pmtimer/hpet reference again
-		 */
+		tsc_pit_khz = pit_calibrate_tsc();
 		tsc2 = tsc_read_refs(&pm2, hpet ? &hpet2 : NULL);
-
 		local_irq_restore(flags);
 
-		/*
-		 * Sanity checks:
-		 *
-		 * If we were not able to read the PIT more than 5000
-		 * times, then we have been hit by a massive SMI
-		 *
-		 * If the maximum is 10 times larger than the minimum,
-		 * then we got hit by an SMI as well.
-		 */
-		if (pitcnt > 5000 && tscmax < 10 * tscmin) {
-
-			/* Calculate the PIT value */
-			delta = tr2 - tr1;
-			do_div(delta, 50);
-
-			/* We take the smallest value into account */
-			tsc_pit_min = min(tsc_pit_min, (unsigned long) delta);
-		}
+		/* Pick the lowest PIT TSC calibration so far */
+		tsc_pit_min = min(tsc_pit_min, tsc_pit_khz);
 
 		/* hpet or pmtimer available ? */
 		if (!hpet && !pm1 && !pm2)
-- 
GitLab


From b94d8eea44df985ea22b1f51e402b4bbfdd6d793 Mon Sep 17 00:00:00 2001
From: Assaf Krauss <assaf.krauss@intel.com>
Date: Wed, 3 Sep 2008 11:18:42 +0800
Subject: [PATCH 666/869] iwlwifi: W/A for the TSF correction in IBSS

This patch is a W/A for the TSF sync issue in IBSS merging. HW is not
capable to sync TSF (it's constantly little behind). This creates
constant IBSS merging upon reception of each beacon, adding and removing
station which in turn creates above 50% packet loss and thus dramatically
degrade the throughput. The W/A simply stops the driver from declaring it
has a reliable TSF value and thus eliminates IBSS merging.

Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 2 +-
 drivers/net/wireless/iwlwifi/iwl-rx.c  | 5 ++++-
 2 files changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index c0b73c4d6f4..2afa1fb052e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3588,7 +3588,7 @@ static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *sk
 
 	priv->assoc_id = 0;
 	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp;
-	priv->timestamp = le64_to_cpu(timestamp) +  (priv->beacon_int * 1000);
+	priv->timestamp = le64_to_cpu(timestamp);
 
 	IWL_DEBUG_MAC80211("leave\n");
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index f3f6ea49fdd..e81bfc42a7c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -1173,7 +1173,10 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 
 	rx_status.antenna = 0;
 	rx_status.flag = 0;
-	rx_status.flag |= RX_FLAG_TSFT;
+
+	/* TSF isn't reliable. In order to allow smooth user experience,
+	 * this W/A doesn't propagate it to the mac80211 */
+	/*rx_status.flag |= RX_FLAG_TSFT;*/
 
 	if ((unlikely(rx_start->cfg_phy_cnt > 20))) {
 		IWL_DEBUG_DROP("dsp size out of range [0,20]: %d/n",
-- 
GitLab


From 0ffe014a8c548f88694815ae7b25d6e86550917e Mon Sep 17 00:00:00 2001
From: Ron Rindjunsky <ron.rindjunsky@intel.com>
Date: Wed, 3 Sep 2008 11:18:43 +0800
Subject: [PATCH 667/869] iwlwifi: fix hidden ssid discovery in passive
 channels

This enables sending of direct probes on passive channels, as long as
traffic was detected on that channel. This enables connectivity to
hidden/non broadcasting SSIDs APs on passive channels. Note 5000 HW
declares all 5.2 spectrum as passive.

Signed-off-by: Cahill Ben <ben.m.cahill@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-scan.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 9bb6adb28b7..6c8ac3a87d5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -421,7 +421,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv,
 		else
 			scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;
 
-		if ((scan_ch->type & SCAN_CHANNEL_TYPE_ACTIVE) && n_probes)
+		if (n_probes)
 			scan_ch->type |= IWL_SCAN_PROBE_MASK(n_probes);
 
 		scan_ch->active_dwell = cpu_to_le16(active_dwell);
-- 
GitLab


From 545597036caefd4b438731abaca902efe004b1b4 Mon Sep 17 00:00:00 2001
From: Mohamed Abbas <mohamed.abbas@intel.com>
Date: Wed, 3 Sep 2008 11:18:44 +0800
Subject: [PATCH 668/869] iwlwifi: remove false rxon if rx chain changes

Rx chain might change during power save transitions but it doesn't
require sending Full-ROXN command to the firmware. Full-RXON requires
reconnection to an AP and thus affects user experience. The patch
avoids the Full-RXON by removing the rx_chain modification check in
iwl_full_rxon_required function.

Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 2afa1fb052e..a5feb0cc982 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -181,14 +181,14 @@ static int iwl4965_check_rxon_cmd(struct iwl_rxon_cmd *rxon)
 }
 
 /**
- * iwl4965_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
+ * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed
  * @priv: staging_rxon is compared to active_rxon
  *
  * If the RXON structure is changing enough to require a new tune,
  * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that
  * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required.
  */
-static int iwl4965_full_rxon_required(struct iwl_priv *priv)
+static int iwl_full_rxon_required(struct iwl_priv *priv)
 {
 
 	/* These items are only settable from the full RXON command */
@@ -207,7 +207,6 @@ static int iwl4965_full_rxon_required(struct iwl_priv *priv)
 	     priv->active_rxon.ofdm_ht_single_stream_basic_rates) ||
 	    (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates !=
 	     priv->active_rxon.ofdm_ht_dual_stream_basic_rates) ||
-	    (priv->staging_rxon.rx_chain != priv->active_rxon.rx_chain) ||
 	    (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id))
 		return 1;
 
@@ -263,7 +262,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
 	/* If we don't need to send a full RXON, we can use
 	 * iwl4965_rxon_assoc_cmd which is used to reconfigure filter
 	 * and other flags for the current radio configuration. */
-	if (!iwl4965_full_rxon_required(priv)) {
+	if (!iwl_full_rxon_required(priv)) {
 		ret = iwl_send_rxon_assoc(priv);
 		if (ret) {
 			IWL_ERROR("Error setting RXON_ASSOC (%d)\n", ret);
-- 
GitLab


From 4834c73f055b92f719a23e29e275559fa8c29513 Mon Sep 17 00:00:00 2001
From: Ron Rindjunsky <ron.rindjunsky@intel.com>
Date: Wed, 3 Sep 2008 11:18:46 +0800
Subject: [PATCH 669/869] iwlwifi: fix station mimo power save values

This patch fixes the wrong use MIMO power save values. Our TX was
configured with our MIMO power save values instead of peer's MIMO power
save values, this may affect connectivity. The peer STA/AP may not sense
our traffic at all as it doesn't have all RX chains opened.

Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 3 ++-
 drivers/net/wireless/iwlwifi/iwl-agn.c    | 2 --
 drivers/net/wireless/iwlwifi/iwl-dev.h    | 1 -
 3 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 754fef5b592..90a2b6dee7c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -1153,7 +1153,8 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv,
 	    !sta->ht_info.ht_supported)
 		return -1;
 
-	if (priv->current_ht_config.tx_mimo_ps_mode == IWL_MIMO_PS_STATIC)
+	if (((sta->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS) >> 2)
+						== IWL_MIMO_PS_STATIC)
 		return -1;
 
 	/* Need both Tx chains/antennas to support MIMO */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index a5feb0cc982..34928c8ed20 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -586,8 +586,6 @@ static void iwl4965_ht_conf(struct iwl_priv *priv,
 		iwl_conf->supported_chan_width = 0;
 	}
 
-	iwl_conf->tx_mimo_ps_mode =
-		(u8)((ht_conf->cap & IEEE80211_HT_CAP_MIMO_PS) >> 2);
 	memcpy(iwl_conf->supp_mcs_set, ht_conf->supp_mcs_set, 16);
 
 	iwl_conf->control_channel = ht_bss_conf->primary_channel;
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index c19db438306..cdfb343c7ec 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -412,7 +412,6 @@ struct iwl_ht_info {
 	/* self configuration data */
 	u8 is_ht;
 	u8 supported_chan_width;
-	u16 tx_mimo_ps_mode;
 	u8 is_green_field;
 	u8 sgf;			/* HT_SHORT_GI_* short guard interval */
 	u8 max_amsdu_size;
-- 
GitLab


From 28a6b07a14bd5e63af2c0304306f35c5b963910b Mon Sep 17 00:00:00 2001
From: Tomas Winkler <tomas.winkler@intel.com>
Date: Wed, 3 Sep 2008 11:18:47 +0800
Subject: [PATCH 670/869] iwlwifi: fix rx_chain computation

This patch fixes rx_chain computation. The code that adjusts number of
rx chains to number supported by HW was missing. Miss configuration
causes firmware error.  Note: iwlwifi supports HW with up to 3 RX
chains (2x2, 2x3, 1x2, and 3x3 MIMO). This patch also simplifies the
whole RX chain computation.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-core.c | 77 +++++++++++++++----------
 1 file changed, 46 insertions(+), 31 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index c72f72579be..80f2f84defa 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -592,12 +592,11 @@ static void iwlcore_free_geos(struct iwl_priv *priv)
 	clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
 }
 
-static u8 is_single_rx_stream(struct iwl_priv *priv)
+static bool is_single_rx_stream(struct iwl_priv *priv)
 {
 	return !priv->current_ht_config.is_ht ||
 	       ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
-		(priv->current_ht_config.supp_mcs_set[2] == 0)) ||
-	       priv->ps_mode == IWL_MIMO_PS_STATIC;
+		(priv->current_ht_config.supp_mcs_set[2] == 0));
 }
 
 static u8 iwl_is_channel_extension(struct iwl_priv *priv,
@@ -704,33 +703,39 @@ EXPORT_SYMBOL(iwl_set_rxon_ht);
  * MIMO (dual stream) requires at least 2, but works better with 3.
  * This does not determine *which* chains to use, just how many.
  */
-static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
-					u8 *idle_state, u8 *rx_state)
+static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
 {
-	u8 is_single = is_single_rx_stream(priv);
-	u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
+	bool is_single = is_single_rx_stream(priv);
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
 
 	/* # of Rx chains to use when expecting MIMO. */
 	if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
-		*rx_state = 2;
+		return 2;
 	else
-		*rx_state = 3;
+		return 3;
+}
 
+static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
+{
+	int idle_cnt;
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
 	/* # Rx chains when idling and maybe trying to save power */
 	switch (priv->ps_mode) {
 	case IWL_MIMO_PS_STATIC:
 	case IWL_MIMO_PS_DYNAMIC:
-		*idle_state = (is_cam) ? 2 : 1;
+		idle_cnt = (is_cam) ? 2 : 1;
 		break;
 	case IWL_MIMO_PS_NONE:
-		*idle_state = (is_cam) ? *rx_state : 1;
+		idle_cnt = (is_cam) ? active_cnt : 1;
 		break;
+	case IWL_MIMO_PS_INVALID:
 	default:
-		*idle_state = 1;
+		IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode);
+		WARN_ON(1);
+		idle_cnt = -1;
 		break;
 	}
-
-	return 0;
+	return idle_cnt;
 }
 
 /**
@@ -741,34 +746,44 @@ static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
  */
 void iwl_set_rxon_chain(struct iwl_priv *priv)
 {
-	u8 is_single = is_single_rx_stream(priv);
-	u8 idle_state, rx_state;
-
-	priv->staging_rxon.rx_chain = 0;
-	rx_state = idle_state = 3;
+	bool is_single = is_single_rx_stream(priv);
+	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
+	u8 idle_rx_cnt, active_rx_cnt;
+	u16 rx_chain;
 
 	/* Tell uCode which antennas are actually connected.
 	 * Before first association, we assume all antennas are connected.
 	 * Just after first association, iwl_chain_noise_calibration()
 	 *    checks which antennas actually *are* connected. */
-	priv->staging_rxon.rx_chain |=
-		    cpu_to_le16(priv->hw_params.valid_rx_ant <<
-						 RXON_RX_CHAIN_VALID_POS);
+	rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
 
 	/* How many receivers should we use? */
-	iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state);
-	priv->staging_rxon.rx_chain |=
-		cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
-	priv->staging_rxon.rx_chain |=
-		cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
-
-	if (!is_single && (rx_state >= 2) &&
-	    !test_bit(STATUS_POWER_PMI, &priv->status))
+	active_rx_cnt = iwl_get_active_rx_chain_count(priv);
+	idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt);
+
+	/* correct rx chain count accoridng hw settings */
+	if (priv->hw_params.rx_chains_num < active_rx_cnt)
+		active_rx_cnt = priv->hw_params.rx_chains_num;
+
+	if (priv->hw_params.rx_chains_num < idle_rx_cnt)
+		idle_rx_cnt = priv->hw_params.rx_chains_num;
+
+	rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
+	rx_chain |= idle_rx_cnt  << RXON_RX_CHAIN_CNT_POS;
+
+	priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain);
+
+	if (!is_single && (active_rx_cnt >= 2) && is_cam)
 		priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
 	else
 		priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
 
-	IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
+	IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n",
+			priv->staging_rxon.rx_chain,
+			active_rx_cnt, idle_rx_cnt);
+
+	WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
+		active_rx_cnt < idle_rx_cnt);
 }
 EXPORT_SYMBOL(iwl_set_rxon_chain);
 
-- 
GitLab


From 73b7d742519ab4cc1b7a12c7af15187fc0ede8e7 Mon Sep 17 00:00:00 2001
From: Tomas Winkler <tomas.winkler@intel.com>
Date: Wed, 3 Sep 2008 11:18:48 +0800
Subject: [PATCH 671/869] iwlwifi: fix Tx cmd memory allocation failure
 handling

This patch "iwlwifi: do not use GFP_DMA in iwl_tx_queue_init" removes
GFP_DMA from allocation tx command buffers. GFP_DMA allows allocation
only for memory under 16M which causes allocation problems
suspend/resume flows.

Using kmalloc is temporal solution and some consistent/coherent
allocation schema will be more correct. Since iwlwifi hardware
supports 64bit address this solution should work on x86 (32 and
64bit) for now.

This patch fixes memory freeing problem in the previous patch.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Ian Schram <ischram@telenet.be>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-tx.c | 27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index ff879d46624..78b1a7a4ca4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -402,12 +402,11 @@ static int iwl_hw_tx_queue_init(struct iwl_priv *priv,
 /**
  * iwl_tx_queue_init - Allocate and initialize one tx/cmd queue
  */
-static int iwl_tx_queue_init(struct iwl_priv *priv,
-			     struct iwl_tx_queue *txq,
+static int iwl_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq,
 			     int slots_num, u32 txq_id)
 {
 	int i, len;
-	int rc = 0;
+	int ret;
 
 	/*
 	 * Alloc buffer array for commands (Tx or other types of commands).
@@ -428,17 +427,14 @@ static int iwl_tx_queue_init(struct iwl_priv *priv,
 
 		txq->cmd[i] = kmalloc(len, GFP_KERNEL);
 		if (!txq->cmd[i])
-			return -ENOMEM;
+			goto err;
 	}
 
 	/* Alloc driver data array and TFD circular buffer */
-	rc = iwl_tx_queue_alloc(priv, txq, txq_id);
-	if (rc) {
-		for (i = 0; i < slots_num; i++)
-			kfree(txq->cmd[i]);
+	ret = iwl_tx_queue_alloc(priv, txq, txq_id);
+	if (ret)
+		goto err;
 
-		return -ENOMEM;
-	}
 	txq->need_update = 0;
 
 	/* TFD_QUEUE_SIZE_MAX must be power-of-two size, otherwise
@@ -452,6 +448,17 @@ static int iwl_tx_queue_init(struct iwl_priv *priv,
 	iwl_hw_tx_queue_init(priv, txq);
 
 	return 0;
+err:
+	for (i = 0; i < slots_num; i++) {
+		kfree(txq->cmd[i]);
+		txq->cmd[i] = NULL;
+	}
+
+	if (txq_id == IWL_CMD_QUEUE_NUM) {
+		kfree(txq->cmd[slots_num]);
+		txq->cmd[slots_num] = NULL;
+	}
+	return -ENOMEM;
 }
 /**
  * iwl_hw_txq_ctx_free - Free TXQ Context
-- 
GitLab


From d535311ecbba0d692b5f1278b8bcb2581c3482e0 Mon Sep 17 00:00:00 2001
From: Gregory Greenman <gregory.greenman@intel.com>
Date: Wed, 3 Sep 2008 11:18:49 +0800
Subject: [PATCH 672/869] iwlwifi: call apm stop on exit

This patch calls apm stop on exit and suspend. Without this patch
hardware consumes power even after driver is removed or suspended.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 34928c8ed20..4e3d6c7fd6d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2187,7 +2187,10 @@ static void __iwl4965_down(struct iwl_priv *priv)
 	udelay(5);
 
 	/* FIXME: apm_ops.suspend(priv) */
-	priv->cfg->ops->lib->apm_ops.reset(priv);
+	if (exit_pending || test_bit(STATUS_IN_SUSPEND, &priv->status))
+		priv->cfg->ops->lib->apm_ops.stop(priv);
+	else
+		priv->cfg->ops->lib->apm_ops.reset(priv);
 	priv->cfg->ops->lib->free_shared_mem(priv);
 
  exit:
-- 
GitLab


From 0b124c31838bcf0459708aa91ce859582c7d3ca1 Mon Sep 17 00:00:00 2001
From: Gregory Greenman <gregory.greenman@intel.com>
Date: Wed, 3 Sep 2008 11:18:50 +0800
Subject: [PATCH 673/869] iwlwifi: fix STATUS_EXIT_PENDING is not set on
 pci_remove

This patch sets STATUS_EXIT_PENDING on pci_remove. Otherwise
iwl4965_down may fail to uninitialize the driver.

Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/iwlwifi/iwl-agn.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 4e3d6c7fd6d..e01f048a02d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -4372,15 +4372,18 @@ static void __devexit iwl4965_pci_remove(struct pci_dev *pdev)
 	iwl_dbgfs_unregister(priv);
 	sysfs_remove_group(&pdev->dev.kobj, &iwl4965_attribute_group);
 
+	/* ieee80211_unregister_hw call wil cause iwl4965_mac_stop to
+	 * to be called and iwl4965_down since we are removing the device
+	 * we need to set STATUS_EXIT_PENDING bit.
+	 */
+	set_bit(STATUS_EXIT_PENDING, &priv->status);
 	if (priv->mac80211_registered) {
 		ieee80211_unregister_hw(priv->hw);
 		priv->mac80211_registered = 0;
+	} else {
+		iwl4965_down(priv);
 	}
 
-	set_bit(STATUS_EXIT_PENDING, &priv->status);
-
-	iwl4965_down(priv);
-
 	/* make sure we flush any pending irq or
 	 * tasklet for the driver
 	 */
-- 
GitLab


From 43f30ae0a6308fd5b862ee7851feca1fc18c72d0 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Mon, 11 Aug 2008 14:01:49 +0300
Subject: [PATCH 674/869] ath9k: Fix TX status reporting

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/main.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 95b33714948..c5107f269f2 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -1067,8 +1067,16 @@ void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb,
 		tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
 		tx_status->flags &= ~ATH_TX_BAR;
 	}
-	if (tx_status->flags)
-		tx_info->status.excessive_retries = 1;
+
+	if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) {
+		if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+			/* Frame was not ACKed, but an ACK was expected */
+			tx_info->status.excessive_retries = 1;
+		}
+	} else {
+		/* Frame was ACKed */
+		tx_info->flags |= IEEE80211_TX_STAT_ACK;
+	}
 
 	tx_info->status.retry_count = tx_status->retries;
 
-- 
GitLab


From 9aab3e3ee6f256a1eaabc275e0748132966f963d Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni.malinen@atheros.com>
Date: Mon, 11 Aug 2008 14:01:51 +0300
Subject: [PATCH 675/869] ath9k: Fix TX control flag use for no ACK and RTS/CTS

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---
 drivers/net/wireless/ath9k/xmit.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 157f830ee6b..550129f717e 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -357,9 +357,9 @@ static int ath_tx_prepare(struct ath_softc *sc,
 	txctl->flags = ATH9K_TXDESC_CLRDMASK;    /* needed for crypto errors */
 
 	if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK)
-		tx_info->flags |= ATH9K_TXDESC_NOACK;
+		txctl->flags |= ATH9K_TXDESC_NOACK;
 	if (tx_info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
-		tx_info->flags |= ATH9K_TXDESC_RTSENA;
+		txctl->flags |= ATH9K_TXDESC_RTSENA;
 
 	/*
 	 * Setup for rate calculations.
-- 
GitLab


From 2e7acd75cba3b7afa4007f20f22a86dbbdb21753 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Wed, 3 Sep 2008 16:46:35 -0300
Subject: [PATCH 676/869] V4L/DVB (8555): au8522: add mechanism to configure IF
 frequency for vsb and qam

Add a mechanism to configure IF frequency for vsb and qam.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/frontends/au8522.c | 66 ++++++++++++++++++++++++++++
 drivers/media/dvb/frontends/au8522.h |  9 ++++
 2 files changed, 75 insertions(+)

diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c
index f7b71657f0f..5741bc93079 100644
--- a/drivers/media/dvb/frontends/au8522.c
+++ b/drivers/media/dvb/frontends/au8522.c
@@ -304,6 +304,70 @@ static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse,
 	return ret;
 }
 
+/* 3.25 MHz IF Frequency table */
+static struct {
+	u16 reg;
+	u16 data;
+} if_3_25_mhz_tab[] = {
+	{ 0x80b5, 0x00 },
+	{ 0x80b6, 0x3d },
+	{ 0x80b7, 0xa0 },
+};
+
+/* 4.00 MHz IF Frequency table */
+static struct {
+	u16 reg;
+	u16 data;
+} if_4_mhz_tab[] = {
+	{ 0x80b5, 0x00 },
+	{ 0x80b6, 0x4b },
+	{ 0x80b7, 0xd9 },
+};
+
+/* 6.00 MHz IF Frequency table */
+static struct {
+	u16 reg;
+	u16 data;
+} if_6_mhz_tab[] = {
+	{ 0x80b5, 0xfb },
+	{ 0x80b6, 0x8e },
+	{ 0x80b7, 0x39 },
+};
+
+static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq)
+{
+	struct au8522_state *state = fe->demodulator_priv;
+	int i;
+
+	switch (if_freq) {
+	case AU8522_IF_3_25MHZ:
+		dprintk("%s() 3.25 MHz\n", __func__);
+		for (i = 0; i < ARRAY_SIZE(if_3_25_mhz_tab); i++)
+			au8522_writereg(state,
+					if_3_25_mhz_tab[i].reg,
+					if_3_25_mhz_tab[i].data);
+		break;
+	case AU8522_IF_4MHZ:
+		dprintk("%s() 4.00 MHz\n", __func__);
+		for (i = 0; i < ARRAY_SIZE(if_4_mhz_tab); i++)
+			au8522_writereg(state,
+					if_4_mhz_tab[i].reg,
+					if_4_mhz_tab[i].data);
+		break;
+	case AU8522_IF_6MHZ:
+		dprintk("%s() 6.00 MHz\n", __func__);
+		for (i = 0; i < ARRAY_SIZE(if_6_mhz_tab); i++)
+			au8522_writereg(state,
+					if_6_mhz_tab[i].reg,
+					if_6_mhz_tab[i].data);
+		break;
+	default:
+		dprintk("%s() IF Frequency not supported\n", __func__);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 /* VSB Modulation table */
 static struct {
 	u16 reg;
@@ -438,6 +502,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 			au8522_writereg(state,
 				VSB_mod_tab[i].reg,
 				VSB_mod_tab[i].data);
+		au8522_set_if(fe, state->config->vsb_if);
 		break;
 	case QAM_64:
 	case QAM_256:
@@ -446,6 +511,7 @@ static int au8522_enable_modulation(struct dvb_frontend *fe,
 			au8522_writereg(state,
 				QAM_mod_tab[i].reg,
 				QAM_mod_tab[i].data);
+		au8522_set_if(fe, state->config->qam_if);
 		break;
 	default:
 		dprintk("%s() Invalid modulation\n", __func__);
diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb/frontends/au8522.h
index d7affa3cdb2..afc9af26e7a 100644
--- a/drivers/media/dvb/frontends/au8522.h
+++ b/drivers/media/dvb/frontends/au8522.h
@@ -24,6 +24,12 @@
 
 #include <linux/dvb/frontend.h>
 
+enum au8522_if_freq {
+	AU8522_IF_6MHZ = 0,
+	AU8522_IF_4MHZ,
+	AU8522_IF_3_25MHZ,
+};
+
 struct au8522_config {
 	/* the demodulator's i2c address */
 	u8 demod_address;
@@ -32,6 +38,9 @@ struct au8522_config {
 #define AU8522_TUNERLOCKING 0
 #define AU8522_DEMODLOCKING 1
 	u8 status_mode;
+
+	enum au8522_if_freq vsb_if;
+	enum au8522_if_freq qam_if;
 };
 
 #if defined(CONFIG_DVB_AU8522) || 				\
-- 
GitLab


From 8e8bd229eef385ab420d4fa51c611d4ddc7cb0c8 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Wed, 3 Sep 2008 16:46:36 -0300
Subject: [PATCH 677/869] V4L/DVB (8556): au0828: add support for Hauppauge
 Woodbury

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 Documentation/video4linux/CARDLIST.au0828 |  1 +
 drivers/media/video/au0828/Kconfig        |  1 +
 drivers/media/video/au0828/au0828-cards.c |  7 +++++++
 drivers/media/video/au0828/au0828-cards.h |  1 +
 drivers/media/video/au0828/au0828-dvb.c   | 21 +++++++++++++++++++++
 5 files changed, 31 insertions(+)

diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828
index eedc399e8de..aa05e5bb22f 100644
--- a/Documentation/video4linux/CARDLIST.au0828
+++ b/Documentation/video4linux/CARDLIST.au0828
@@ -3,3 +3,4 @@
   2 -> Hauppauge HVR850                         (au0828)        [2040:7240]
   3 -> DViCO FusionHDTV USB                     (au0828)        [0fe9:d620]
   4 -> Hauppauge HVR950Q rev xxF8               (au0828)        [2040:7201,2040:7211,2040:7281]
+  5 -> Hauppauge Woodbury                       (au0828)        [2040:8200]
diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig
index ed9a50f189f..018f72b8e3e 100644
--- a/drivers/media/video/au0828/Kconfig
+++ b/drivers/media/video/au0828/Kconfig
@@ -7,6 +7,7 @@ config VIDEO_AU0828
 	select DVB_AU8522 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
 	select MEDIA_TUNER_MXL5007T if !DVB_FE_CUSTOMIZE
+	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
 	---help---
 	  This is a video4linux driver for Auvitek's USB device.
 
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 443e5900976..14b9fc9bb62 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -38,6 +38,9 @@ struct au0828_board au0828_boards[] = {
 	[AU0828_BOARD_DVICO_FUSIONHDTV7] = {
 		.name	= "DViCO FusionHDTV USB",
 	},
+	[AU0828_BOARD_HAUPPAUGE_WOODBURY] = {
+		.name = "Hauppauge Woodbury",
+	},
 };
 
 /* Tuner callback function for au0828 boards. Currently only needed
@@ -115,6 +118,7 @@ void au0828_card_setup(struct au0828_dev *dev)
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 		if (dev->i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xa0);
 		break;
@@ -134,6 +138,7 @@ void au0828_gpio_setup(struct au0828_dev *dev)
 	case AU0828_BOARD_HAUPPAUGE_HVR850:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
 		/* GPIO's
 		 * 4 - CS5340
 		 * 5 - AU8522 Demodulator
@@ -205,6 +210,8 @@ struct usb_device_id au0828_usb_id_table [] = {
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 	{ USB_DEVICE(0x2040, 0x7281),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x2040, 0x8200),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 	{ },
 };
 
diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h
index c37f5fd0fa8..102ed03dc6b 100644
--- a/drivers/media/video/au0828/au0828-cards.h
+++ b/drivers/media/video/au0828/au0828-cards.h
@@ -24,3 +24,4 @@
 #define AU0828_BOARD_HAUPPAUGE_HVR850 	2
 #define AU0828_BOARD_DVICO_FUSIONHDTV7	3
 #define AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL	4
+#define AU0828_BOARD_HAUPPAUGE_WOODBURY	5
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index 584a83a94a2..c862f9e4d2f 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -29,6 +29,7 @@
 #include "au8522.h"
 #include "xc5000.h"
 #include "mxl5007t.h"
+#include "tda18271.h"
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
@@ -40,6 +41,13 @@ static struct au8522_config hauppauge_hvr950q_config = {
 	.status_mode   = AU8522_DEMODLOCKING,
 };
 
+static struct au8522_config hauppauge_woodbury_config = {
+	.demod_address = 0x8e >> 1,
+	.status_mode   = AU8522_DEMODLOCKING,
+	.qam_if        = AU8522_IF_4MHZ,
+	.vsb_if        = AU8522_IF_3_25MHZ,
+};
+
 static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
 	.i2c_address      = 0x61,
 	.if_khz           = 6000,
@@ -51,6 +59,10 @@ static struct mxl5007t_config mxl5007t_hvr950q_config = {
 	.if_freq_hz = MxL_IF_6_MHZ,
 };
 
+static struct tda18271_config hauppauge_woodbury_tunerconfig = {
+	.gate    = TDA18271_GATE_DIGITAL,
+};
+
 /*-------------------------------------------------------------------*/
 static void urb_completion(struct urb *purb)
 {
@@ -357,6 +369,15 @@ int au0828_dvb_register(struct au0828_dev *dev)
 				   &dev->i2c_adap, 0x60,
 				   &mxl5007t_hvr950q_config);
 		break;
+	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
+		dvb->frontend = dvb_attach(au8522_attach,
+				&hauppauge_woodbury_config,
+				&dev->i2c_adap);
+		if (dvb->frontend != NULL)
+			dvb_attach(tda18271_attach, dvb->frontend,
+				   0x60, &dev->i2c_adap,
+				   &hauppauge_woodbury_tunerconfig);
+		break;
 	default:
 		printk(KERN_WARNING "The frontend of your DVB/ATSC card "
 		       "isn't supported yet\n");
-- 
GitLab


From df76de098de0118cdcf6ec0e60cb4063837f8def Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Wed, 3 Sep 2008 16:46:40 -0300
Subject: [PATCH 678/869] V4L/DVB (8598): au8522: clean up function
 au8522_set_if

re-write this function to make it simpler

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/frontends/au8522.c | 65 ++++++++--------------------
 1 file changed, 19 insertions(+), 46 deletions(-)

diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c
index 5741bc93079..92c8fbe0d6c 100644
--- a/drivers/media/dvb/frontends/au8522.c
+++ b/drivers/media/dvb/frontends/au8522.c
@@ -304,67 +304,40 @@ static int au8522_mse2snr_lookup(struct mse2snr_tab *tab, int sz, int mse,
 	return ret;
 }
 
-/* 3.25 MHz IF Frequency table */
-static struct {
-	u16 reg;
-	u16 data;
-} if_3_25_mhz_tab[] = {
-	{ 0x80b5, 0x00 },
-	{ 0x80b6, 0x3d },
-	{ 0x80b7, 0xa0 },
-};
-
-/* 4.00 MHz IF Frequency table */
-static struct {
-	u16 reg;
-	u16 data;
-} if_4_mhz_tab[] = {
-	{ 0x80b5, 0x00 },
-	{ 0x80b6, 0x4b },
-	{ 0x80b7, 0xd9 },
-};
-
-/* 6.00 MHz IF Frequency table */
-static struct {
-	u16 reg;
-	u16 data;
-} if_6_mhz_tab[] = {
-	{ 0x80b5, 0xfb },
-	{ 0x80b6, 0x8e },
-	{ 0x80b7, 0x39 },
-};
-
 static int au8522_set_if(struct dvb_frontend *fe, enum au8522_if_freq if_freq)
 {
 	struct au8522_state *state = fe->demodulator_priv;
-	int i;
+	u8 r0b5, r0b6, r0b7;
+	char *ifmhz;
 
 	switch (if_freq) {
 	case AU8522_IF_3_25MHZ:
-		dprintk("%s() 3.25 MHz\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(if_3_25_mhz_tab); i++)
-			au8522_writereg(state,
-					if_3_25_mhz_tab[i].reg,
-					if_3_25_mhz_tab[i].data);
+		ifmhz = "3.25";
+		r0b5 = 0x00;
+		r0b6 = 0x3d;
+		r0b7 = 0xa0;
 		break;
 	case AU8522_IF_4MHZ:
-		dprintk("%s() 4.00 MHz\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(if_4_mhz_tab); i++)
-			au8522_writereg(state,
-					if_4_mhz_tab[i].reg,
-					if_4_mhz_tab[i].data);
+		ifmhz = "4.00";
+		r0b5 = 0x00;
+		r0b6 = 0x4b;
+		r0b7 = 0xd9;
 		break;
 	case AU8522_IF_6MHZ:
-		dprintk("%s() 6.00 MHz\n", __func__);
-		for (i = 0; i < ARRAY_SIZE(if_6_mhz_tab); i++)
-			au8522_writereg(state,
-					if_6_mhz_tab[i].reg,
-					if_6_mhz_tab[i].data);
+		ifmhz = "6.00";
+		r0b5 = 0xfb;
+		r0b6 = 0x8e;
+		r0b7 = 0x39;
 		break;
 	default:
 		dprintk("%s() IF Frequency not supported\n", __func__);
 		return -EINVAL;
 	}
+	dprintk("%s() %s MHz\n", __func__, ifmhz);
+	au8522_writereg(state, 0x80b5, r0b5);
+	au8522_writereg(state, 0x80b6, r0b6);
+	au8522_writereg(state, 0x80b7, r0b7);
+
 	return 0;
 }
 
-- 
GitLab


From 3e3e2a8f1f6837a4f29b1416db40c88d846ab066 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Wed, 3 Sep 2008 16:46:41 -0300
Subject: [PATCH 679/869] V4L/DVB (8599): au8522: remove if frequency settings
 from vsb/qam modulation tables

Since IF frequency is set after the vsb/qam modulation tables are written,
remove the redundant register settings from the vsb/qam modulation tables.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/dvb/frontends/au8522.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c
index 92c8fbe0d6c..5a6cbb47627 100644
--- a/drivers/media/dvb/frontends/au8522.c
+++ b/drivers/media/dvb/frontends/au8522.c
@@ -371,9 +371,6 @@ static struct {
 	{ 0x80af, 0x66 },
 	{ 0x821b, 0xcc },
 	{ 0x821d, 0x80 },
-	{ 0x80b5, 0xfb },
-	{ 0x80b6, 0x8e },
-	{ 0x80b7, 0x39 },
 	{ 0x80a4, 0xe8 },
 	{ 0x8231, 0x13 },
 };
@@ -387,9 +384,6 @@ static struct {
 	{ 0x80a4, 0x00 },
 	{ 0x8081, 0xc4 },
 	{ 0x80a5, 0x40 },
-	{ 0x80b5, 0xfb },
-	{ 0x80b6, 0x8e },
-	{ 0x80b7, 0x39 },
 	{ 0x80aa, 0x77 },
 	{ 0x80ad, 0x77 },
 	{ 0x80a6, 0x67 },
-- 
GitLab


From e908b6e34c1b799c830cae5f8e721f80534f9748 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Wed, 3 Sep 2008 16:46:43 -0300
Subject: [PATCH 680/869] V4L/DVB (8600): au0828: explicitly set 6 MHz IF
 frequency in hauppauge_hvr950q_config

Explicitly set 6 MHz IF frequency for VSB and QAM in
hauppauge_hvr950q_config.

The default value is 6 MHz, so this patch doesn't change anything --
this only improves code readability and may prevent future bugs.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/au0828/au0828-dvb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index c862f9e4d2f..194865380ce 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -39,6 +39,8 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 static struct au8522_config hauppauge_hvr950q_config = {
 	.demod_address = 0x8e >> 1,
 	.status_mode   = AU8522_DEMODLOCKING,
+	.qam_if        = AU8522_IF_6MHZ,
+	.vsb_if        = AU8522_IF_6MHZ,
 };
 
 static struct au8522_config hauppauge_woodbury_config = {
-- 
GitLab


From 888fe747b5d134e2f3b5c2d3ecc25e1c6dcad4c3 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 3 Sep 2008 16:46:50 -0300
Subject: [PATCH 681/869] V4L/DVB (8629): v4l2-ioctl: do not try to handle
 private V4L1 ioctls

Some drivers (e.g. zoran) have private V4L1 ioctls. Do not try to
pass them to v4l1_compat_translate because then the driver will
never see them.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/v4l2-ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index fdfe7739c96..88c0465aede 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -674,7 +674,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file,
 	 __video_do_ioctl will be called again, with one or more
 	 V4L2 ioctls.
 	 ********************************************************/
-	if (_IOC_TYPE(cmd) == 'v')
+	if (_IOC_TYPE(cmd) == 'v' && _IOC_NR(cmd) < BASE_VIDIOCPRIVATE)
 		return v4l_compat_translate_ioctl(inode, file, cmd, arg,
 						__video_do_ioctl);
 #endif
-- 
GitLab


From c58dc0beaf70bce4d04ff53b82a7035a255a04e4 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 3 Sep 2008 16:46:58 -0300
Subject: [PATCH 682/869] V4L/DVB (8633): ivtv: update ivtv version number

Since for 2.6.27 ivtvfb uses DMA for write it is important that
you can identify which ivtv version supports this and which doesn't.
Increase the version number so we can tell the difference.

Thanks to Ian Armstrong for pointing this out to me.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/ivtv/ivtv-version.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h
index 442f43f11b7..8cd753d30bf 100644
--- a/drivers/media/video/ivtv/ivtv-version.h
+++ b/drivers/media/video/ivtv/ivtv-version.h
@@ -22,7 +22,7 @@
 
 #define IVTV_DRIVER_NAME "ivtv"
 #define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 3
+#define IVTV_DRIVER_VERSION_MINOR 4
 #define IVTV_DRIVER_VERSION_PATCHLEVEL 0
 
 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
-- 
GitLab


From d526afe06b285006c63ed8f2eba9589f04e3283a Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 3 Sep 2008 16:47:14 -0300
Subject: [PATCH 683/869] V4L/DVB (8648): ivtv: improve CC support

- change the work-queue to a single threaded high prio workqueue
- use DMA instead of PIO for the sliced VBI data.
- remove some incorrect tests
- increase the internal VBI capture queue size for sliced VBI packets
- ignore duplicate VBI lines

With these changes it should finally be possible to get reliable closed
captions.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/ivtv/ivtv-driver.c  |  2 +-
 drivers/media/video/ivtv/ivtv-driver.h  |  1 +
 drivers/media/video/ivtv/ivtv-irq.c     | 29 +++++++------------------
 drivers/media/video/ivtv/ivtv-queue.h   |  2 +-
 drivers/media/video/ivtv/ivtv-streams.c |  2 +-
 drivers/media/video/ivtv/ivtv-vbi.c     |  4 +++-
 6 files changed, 15 insertions(+), 25 deletions(-)

diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index aea1664948c..4afc7ea07e8 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -688,7 +688,7 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv)
 	spin_lock_init(&itv->lock);
 	spin_lock_init(&itv->dma_reg_lock);
 
-	itv->irq_work_queues = create_workqueue(itv->name);
+	itv->irq_work_queues = create_singlethread_workqueue(itv->name);
 	if (itv->irq_work_queues == NULL) {
 		IVTV_ERR("Could not create ivtv workqueue\n");
 		return -1;
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index ab287b48fc2..2ceb5227637 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -251,6 +251,7 @@ struct ivtv_mailbox_data {
 #define IVTV_F_I_DEC_PAUSED	   20 	/* the decoder is paused */
 #define IVTV_F_I_INITED		   21 	/* set after first open */
 #define IVTV_F_I_FAILED		   22 	/* set if first open failed */
+#define IVTV_F_I_WORK_INITED       23	/* worker thread was initialized */
 
 /* Event notifications */
 #define IVTV_F_I_EV_DEC_STOPPED	   28	/* decoder stopped event */
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index fba150a6cd2..34f3ab82785 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -76,6 +76,13 @@ void ivtv_irq_work_handler(struct work_struct *work)
 
 	DEFINE_WAIT(wait);
 
+	if (test_and_clear_bit(IVTV_F_I_WORK_INITED, &itv->i_flags)) {
+		struct sched_param param = { .sched_priority = 99 };
+
+		/* This thread must use the FIFO scheduler as it
+		   is realtime sensitive. */
+		sched_setscheduler(current, SCHED_FIFO, &param);
+	}
 	if (test_and_clear_bit(IVTV_F_I_WORK_HANDLER_PIO, &itv->i_flags))
 		ivtv_pio_work_handler(itv);
 
@@ -678,34 +685,14 @@ static void ivtv_irq_enc_start_cap(struct ivtv *itv)
 
 static void ivtv_irq_enc_vbi_cap(struct ivtv *itv)
 {
-	struct ivtv_stream *s_mpg = &itv->streams[IVTV_ENC_STREAM_TYPE_MPG];
 	u32 data[CX2341X_MBOX_MAX_DATA];
 	struct ivtv_stream *s;
 
 	IVTV_DEBUG_HI_IRQ("ENC START VBI CAP\n");
 	s = &itv->streams[IVTV_ENC_STREAM_TYPE_VBI];
 
-	/* If more than two VBI buffers are pending, then
-	   clear the old ones and start with this new one.
-	   This can happen during transition stages when MPEG capturing is
-	   started, but the first interrupts haven't arrived yet. During
-	   that period VBI requests can accumulate without being able to
-	   DMA the data. Since at most four VBI DMA buffers are available,
-	   we just drop the old requests when there are already three
-	   requests queued. */
-	if (s->sg_pending_size > 2) {
-		struct ivtv_buffer *buf;
-		list_for_each_entry(buf, &s->q_predma.list, list)
-			ivtv_buf_sync_for_cpu(s, buf);
-		ivtv_queue_move(s, &s->q_predma, NULL, &s->q_free, 0);
-		s->sg_pending_size = 0;
-	}
-	/* if we can append the data, and the MPEG stream isn't capturing,
-	   then start a DMA request for just the VBI data. */
-	if (!stream_enc_dma_append(s, data) &&
-			!test_bit(IVTV_F_S_STREAMING, &s_mpg->s_flags)) {
+	if (!stream_enc_dma_append(s, data))
 		set_bit(ivtv_use_pio(s) ? IVTV_F_S_PIO_PENDING : IVTV_F_S_DMA_PENDING, &s->s_flags);
-	}
 }
 
 static void ivtv_irq_dec_vbi_reinsert(struct ivtv *itv)
diff --git a/drivers/media/video/ivtv/ivtv-queue.h b/drivers/media/video/ivtv/ivtv-queue.h
index 7cfc0c9ab05..476556afd39 100644
--- a/drivers/media/video/ivtv/ivtv-queue.h
+++ b/drivers/media/video/ivtv/ivtv-queue.h
@@ -23,7 +23,7 @@
 #define IVTV_QUEUE_H
 
 #define IVTV_DMA_UNMAPPED	((u32) -1)
-#define SLICED_VBI_PIO 1
+#define SLICED_VBI_PIO 0
 
 /* ivtv_buffer utility functions */
 
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index 54d2023b26c..730e85d86fc 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -363,7 +363,7 @@ static void ivtv_vbi_setup(struct ivtv *itv)
 	/* Every X number of frames a VBI interrupt arrives (frames as in 25 or 30 fps) */
 	data[1] = 1;
 	/* The VBI frames are stored in a ringbuffer with this size (with a VBI frame as unit) */
-	data[2] = raw ? 4 : 8;
+	data[2] = raw ? 4 : 4 * (itv->vbi.raw_size / itv->vbi.enc_size);
 	/* The start/stop codes determine which VBI lines end up in the raw VBI data area.
 	   The codes are from table 24 in the saa7115 datasheet. Each raw/sliced/video line
 	   is framed with codes FF0000XX where XX is the SAV/EAV (Start/End of Active Video)
diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c
index 71798f0da27..1ce9deb1104 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.c
+++ b/drivers/media/video/ivtv/ivtv-vbi.c
@@ -293,6 +293,7 @@ static u32 compress_sliced_buf(struct ivtv *itv, u32 line, u8 *buf, u32 size, u8
 	u32 line_size = itv->vbi.sliced_decoder_line_size;
 	struct v4l2_decode_vbi_line vbi;
 	int i;
+	unsigned lines = 0;
 
 	/* find the first valid line */
 	for (i = 0; i < size; i++, buf++) {
@@ -313,7 +314,8 @@ static u32 compress_sliced_buf(struct ivtv *itv, u32 line, u8 *buf, u32 size, u8
 		}
 		vbi.p = p + 4;
 		itv->video_dec_func(itv, VIDIOC_INT_DECODE_VBI_LINE, &vbi);
-		if (vbi.type) {
+		if (vbi.type && !(lines & (1 << vbi.line))) {
+			lines |= 1 << vbi.line;
 			itv->vbi.sliced_data[line].id = vbi.type;
 			itv->vbi.sliced_data[line].field = vbi.is_second_field;
 			itv->vbi.sliced_data[line].line = vbi.line;
-- 
GitLab


From e52a5574de9d3bb297a26566871eabcbdfab13b5 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:21 -0300
Subject: [PATCH 684/869] V4L/DVB (8660): gspca: Simplify the scan of URB
 packets in pac7311.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/pac7311.c | 206 +++++++++++++++-------------
 1 file changed, 110 insertions(+), 96 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 815bea6edc4..caa33292a08 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -40,7 +40,8 @@ struct sd {
 	unsigned char colors;
 	unsigned char autogain;
 
-	char ffseq;
+	char ffnb;	/* number of 'ff' in the previous frame */
+	char tosof;	/* number of bytes before next start of frame */
 	signed char ag_cnt;
 #define AG_CNT_START 13
 };
@@ -335,6 +336,10 @@ static int sd_open(struct gspca_dev *gspca_dev)
 
 static void sd_start(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->ffnb = 0;
+	sd->tosof = 0;
 	reg_w(gspca_dev, 0xff, 0x01);
 	reg_w_buf(gspca_dev, 0x0002, "\x48\x0a\x40\x08\x00\x00\x08\x00", 8);
 	reg_w_buf(gspca_dev, 0x000a, "\x06\xff\x11\xff\x5a\x30\x90\x4c", 8);
@@ -511,114 +516,123 @@ static void do_autogain(struct gspca_dev *gspca_dev)
 	}
 }
 
+/* output the jpeg header */
+static void put_jpeg_head(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame)
+{
+	unsigned char tmpbuf[4];
+
+	gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+			(__u8 *) pac7311_jpeg_header,
+			12);
+	tmpbuf[0] = gspca_dev->height >> 8;
+	tmpbuf[1] = gspca_dev->height & 0xff;
+	tmpbuf[2] = gspca_dev->width >> 8;
+	tmpbuf[3] = gspca_dev->width & 0xff;
+	gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+			tmpbuf, 4);
+	gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+		(__u8 *) &pac7311_jpeg_header[16],
+		PAC7311_JPEG_HEADER_SIZE - 16);
+}
+
+/* this function is run at interrupt level */
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
 			int len)			/* iso packet length */
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	unsigned char tmpbuf[4];
-	int i, p, ffseq;
-
-/*	if (len < 5) { */
-	if (len < 6) {
-/*		gspca_dev->last_packet_type = DISCARD_PACKET; */
-		return;
-	}
-
-	ffseq = sd->ffseq;
-
-	for (p = 0; p < len - 6; p++) {
-		if ((data[0 + p] == 0xff)
-		    && (data[1 + p] == 0xff)
-		    && (data[2 + p] == 0x00)
-		    && (data[3 + p] == 0xff)
-		    && (data[4 + p] == 0x96)) {
-
-			/* start of frame */
-			if (sd->ag_cnt >= 0 && p > 28) {
-				sd->lum_sum += data[p - 23];
-				if (--sd->ag_cnt < 0) {
-					sd->ag_cnt = AG_CNT_START;
-					atomic_set(&sd->avg_lum,
-						sd->lum_sum / AG_CNT_START);
-					sd->lum_sum = 0;
-					atomic_set(&sd->do_gain, 1);
+	int i;
+
+#define INTER_FRAME 0x53
+#define LUM_OFFSET 0x1e		/* reverse offset / start of frame */
+
+	/*
+	 * inside a frame, there may be:
+	 *	escaped ff ('ff 00')
+	 *	sequences'ff ff ff xx' to remove
+	 *	end of frame ('ff d9')
+	 * at the end of frame, there are:
+	 *	ff d9			end of frame
+	 *	0x33 bytes
+	 *	one byte luminosity
+	 *	0x16 bytes
+	 *	ff ff 00 ff 96 62 44	start of frame header
+	 */
+
+	if (sd->tosof == 0) {	/* if inside a frame */
+
+		/* check for 'ff ff ff xx' at start and at end of packet */
+		/* (len is always >= 3) */
+		switch (sd->ffnb) {
+		case 1:
+			if (data[0] != 0xff)
+				break;		/* keep 'ff 00' */
+			/* fall thru */
+		case 2:
+		case 3:
+			data += 4 - sd->ffnb;
+			len -= 4 - sd->ffnb;
+			sd->ffnb = 0;
+			break;
+		}
+		if (data[len - 1] == 0xff) {
+			if (data[len - 2] == 0xff) {
+				if (data[len - 3] == 0xff) {
+					sd->ffnb = 3;
+					len -= 3;
+				} else {
+					sd->ffnb = 2;
+					len -= 2;
 				}
+			} else {
+				sd->ffnb = 1;
+				len--;
 			}
-
-			/* copy the end of data to the current frame */
-			frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
-						data, p);
-
-			/* put the JPEG header in the new frame */
-			gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-					(unsigned char *) pac7311_jpeg_header,
-					12);
-			tmpbuf[0] = gspca_dev->height >> 8;
-			tmpbuf[1] = gspca_dev->height & 0xff;
-			tmpbuf[2] = gspca_dev->width >> 8;
-			tmpbuf[3] = gspca_dev->width & 0xff;
-			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
-					tmpbuf, 4);
-			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
-				(unsigned char *) &pac7311_jpeg_header[16],
-				PAC7311_JPEG_HEADER_SIZE - 16);
-
-			data += p + 7;
-			len -= p + 7;
-			ffseq = 0;
-			break;
 		}
+	} else {		/* outside a frame */
+
+		/*
+		 * get the luminosity
+		 * and go to the start of frame
+		 */
+		data += sd->tosof;
+		len -= sd->tosof;
+		if (sd->tosof > LUM_OFFSET)
+			sd->lum_sum += data[-LUM_OFFSET];
+		put_jpeg_head(gspca_dev, frame);
+		sd->tosof = 0;
 	}
 
-	/* remove the 'ff ff ff xx' sequences */
-	switch (ffseq) {
-	case 3:
-		data += 1;
-		len -= 1;
-		break;
-	case 2:
-		if (data[0] == 0xff) {
-			data += 2;
-			len -= 2;
-			frame->data_end -= 2;
-		}
-		break;
-	case 1:
-		if (data[0] == 0xff
-		    && data[1] == 0xff) {
-			data += 3;
-			len -= 3;
-			frame->data_end -= 1;
-		}
-		break;
-	}
-	for (i = 0; i < len - 4; i++) {
-		if (data[i] == 0xff
-		    && data[i + 1] == 0xff
-		    && data[i + 2] == 0xff) {
-			memmove(&data[i], &data[i + 4], len - i - 4);
-			len -= 4;
+	for (i = 0; i < len; i++) {
+		if (data[i] != 0xff)
+			continue;
+		switch (data[i + 1]) {
+		case 0xd9:		/* end of frame */
+			frame = gspca_frame_add(gspca_dev,
+						LAST_PACKET,
+						frame, data, i + 1);
+			data += INTER_FRAME;
+			len -= INTER_FRAME;
+			i = 0;
+			if (len > LUM_OFFSET)
+				sd->lum_sum += data[-LUM_OFFSET];
+			if (len < 0) {
+				sd->tosof = -len;
+				break;
+			}
+			put_jpeg_head(gspca_dev, frame);
+			break;
+		case 0xff:		/* 'ff ff ff xx' */
+			gspca_frame_add(gspca_dev, INTER_PACKET,
+					frame, data, i);
+			data += i + 4;
+			len -= i + 4;
+			i = 0;
+			break;
 		}
 	}
-	ffseq = 0;
-	if (data[len - 4] == 0xff) {
-		if (data[len - 3] == 0xff
-		    && data[len - 2] == 0xff) {
-			len -= 4;
-		}
-	} else if (data[len - 3] == 0xff) {
-		if (data[len - 2] == 0xff
-		    && data[len - 1] == 0xff)
-			ffseq = 3;
-	} else if (data[len - 2] == 0xff) {
-		if (data[len - 1] == 0xff)
-			ffseq = 2;
-	} else if (data[len - 1] == 0xff)
-		ffseq = 1;
-	sd->ffseq = ffseq;
-	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
 }
 
 static void getbrightness(struct gspca_dev *gspca_dev)
-- 
GitLab


From 23d9e4776b426d1f8a602e0e8d868154847f0dd4 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:22 -0300
Subject: [PATCH 685/869] V4L/DVB (8661): gspca: Bug in the previous changeset
 about pac7311.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/pac7311.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index caa33292a08..96cd7f644ad 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -610,13 +610,14 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			continue;
 		switch (data[i + 1]) {
 		case 0xd9:		/* end of frame */
+			i += 2;
 			frame = gspca_frame_add(gspca_dev,
 						LAST_PACKET,
-						frame, data, i + 1);
-			data += INTER_FRAME;
-			len -= INTER_FRAME;
+						frame, data, i);
+			data += i + INTER_FRAME;
+			len -= i + INTER_FRAME;
 			i = 0;
-			if (len > LUM_OFFSET)
+			if (len > -LUM_OFFSET)
 				sd->lum_sum += data[-LUM_OFFSET];
 			if (len < 0) {
 				sd->tosof = -len;
-- 
GitLab


From d2d16e9084ee44088974c3312b803d54dd9b46d7 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:23 -0300
Subject: [PATCH 686/869] V4L/DVB (8663): gspca: Webcam 0c45:6128 added in
 sonixj.

Patch adapted from a patch to gspcav1 made by the google microdia group.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 Documentation/video4linux/gspca.txt |   1 +
 drivers/media/video/gspca/sonixj.c  | 128 ++++++++++++++++++++++++----
 2 files changed, 112 insertions(+), 17 deletions(-)

diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 78a863ab8a5..c7fc9fa8bec 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -220,6 +220,7 @@ sonixj		0c45:60c0	Sangha Sn535
 sonixj		0c45:60ec	SN9C105+MO4000
 sonixj		0c45:60fb	Surfer NoName
 sonixj		0c45:60fc	LG-LIC300
+sonixj		0c45:6128	Microdia/Sonix SNP325
 sonixj		0c45:612a	Avant Camera
 sonixj		0c45:612c	Typhoon Rasy Cam 1.3MPix
 sonixj		0c45:6130	Sonix Pccam
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 245a30ec5fb..151e1b625b0 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -54,8 +54,9 @@ struct sd {
 #define SENSOR_HV7131R 0
 #define SENSOR_MI0360 1
 #define SENSOR_MO4000 2
-#define SENSOR_OV7648 3
-#define SENSOR_OV7660 4
+#define SENSOR_OM6802 3
+#define SENSOR_OV7648 4
+#define SENSOR_OV7660 5
 	unsigned char i2c_base;
 };
 
@@ -180,6 +181,20 @@ static const __u8 sn_mo4000[] = {
 	0x08,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00
 };
 
+static const __u8 sn_om6802[] = {
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x23,	0x72,	0x00,	0x1a,	0x34,	0x27,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0x80,	0x34,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x51,	0x01,	0x00,	0x28,	0x1e,	0x40,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x05,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,	0x00,
+	0x08,	0x22,	0x44,	0x63,	0x7d,	0x92,	0xa3,	0xaf,
+	0xbc,	0xc4,	0xcd,	0xd5,	0xdc,	0xe1,	0xe8,	0xef,
+	0xf7
+};
+
 static const __u8 sn_ov7648[] = {
 /*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
 	0x00,	0x21,	0x62,	0x00,	0x1a,	0x20,	0x20,	0x20,
@@ -207,6 +222,7 @@ static const __u8 *sn_tb[] = {
 	sn_hv7131,
 	sn_mi0360,
 	sn_mo4000,
+	sn_om6802,
 	sn_ov7648,
 	sn_ov7660
 };
@@ -340,6 +356,40 @@ static const __u8 mo4000_sensor_init[][8] = {
 	{0xa1, 0x21, 0x11, 0x38, 0x00, 0x00, 0x00, 0x10},
 	{}
 };
+static __u8 om6802_sensor_init[][8] = {
+	{0xa0, 0x34, 0x90, 0x05, 0x00, 0x00, 0x00, 0x10},
+	{0xa0, 0x34, 0x49, 0x85, 0x00, 0x00, 0x00, 0x10},
+	{0xa0, 0x34, 0x5a, 0xc0, 0x00, 0x00, 0x00, 0x10},
+	{0xa0, 0x34, 0xdd, 0x18, 0x00, 0x00, 0x00, 0x10},
+/*	{0xa0, 0x34, 0xfb, 0x11, 0x00, 0x00, 0x00, 0x10}, */
+	{0xa0, 0x34, 0xf0, 0x04, 0x00, 0x00, 0x00, 0x10},
+					/* white balance & auto-exposure */
+/*	{0xa0, 0x34, 0xf1, 0x02, 0x00, 0x00, 0x00, 0x10},
+							 * set color mode */
+/*	{0xa0, 0x34, 0xfe, 0x5b, 0x00, 0x00, 0x00, 0x10},
+						 * max AGC value in AE */
+/*	{0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10},
+							 * preset AGC */
+/*	{0xa0, 0x34, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x10},
+						 * preset brightness */
+/*	{0xa0, 0x34, 0xe7, 0x00, 0x00, 0x00, 0x00, 0x10},
+							 * preset contrast */
+/*	{0xa0, 0x34, 0xe8, 0x31, 0x00, 0x00, 0x00, 0x10},
+							 * preset gamma */
+	{0xa0, 0x34, 0xe9, 0x0f, 0x00, 0x00, 0x00, 0x10},
+					/* luminance mode (0x4f = AE) */
+	{0xa0, 0x34, 0xe4, 0xff, 0x00, 0x00, 0x00, 0x10},
+							/* preset shutter */
+/*	{0xa0, 0x34, 0xef, 0x00, 0x00, 0x00, 0x00, 0x10},
+							 * auto frame rate */
+/*	{0xa0, 0x34, 0xfb, 0xee, 0x00, 0x00, 0x00, 0x10}, */
+
+/*	{0xa0, 0x34, 0x71, 0x84, 0x00, 0x00, 0x00, 0x10}, */
+/*	{0xa0, 0x34, 0x72, 0x05, 0x00, 0x00, 0x00, 0x10}, */
+/*	{0xa0, 0x34, 0x68, 0x80, 0x00, 0x00, 0x00, 0x10}, */
+/*	{0xa0, 0x34, 0x69, 0x01, 0x00, 0x00, 0x00, 0x10}, */
+	{}
+};
 static const __u8 ov7660_sensor_init[][8] = {
 	{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */
 /*		(delay 20ms) */
@@ -685,8 +735,14 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 
 	reg_w(gspca_dev, 0x03, &sn9c1xx[3], 0x0f);
 
-	switch (sd->bridge) {
-	case BRIDGE_SN9C325:
+	switch (sd->sensor) {
+	case SENSOR_OM6802:
+		reg_w1(gspca_dev, 0x02, 0x71);
+		reg_w1(gspca_dev, 0x01, 0x42);
+		reg_w1(gspca_dev, 0x17, 0x64);
+		reg_w1(gspca_dev, 0x01, 0x42);
+		break;
+	case SENSOR_OV7648:
 		reg_w1(gspca_dev, 0x01, 0x43);
 		reg_w1(gspca_dev, 0x17, 0xae);
 		reg_w1(gspca_dev, 0x01, 0x42);
@@ -695,11 +751,11 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 		reg_w1(gspca_dev, 0x01, 0x43);
 		reg_w1(gspca_dev, 0x17, 0x61);
 		reg_w1(gspca_dev, 0x01, 0x42);
-	}
-
-	if (sd->sensor == SENSOR_HV7131R) {
-		if (probesensor(gspca_dev) < 0)
-			return -ENODEV;
+		if (sd->sensor == SENSOR_HV7131R) {
+			if (probesensor(gspca_dev) < 0)
+				return -ENODEV;
+		}
+		break;
 	}
 	return 0;
 }
@@ -737,6 +793,16 @@ static void mo4000_InitSensor(struct gspca_dev *gspca_dev)
 	}
 }
 
+static void om6802_InitSensor(struct gspca_dev *gspca_dev)
+{
+	int i = 0;
+
+	while (om6802_sensor_init[i][0]) {
+		i2c_w8(gspca_dev, om6802_sensor_init[i]);
+		i++;
+	}
+}
+
 static void ov7648_InitSensor(struct gspca_dev *gspca_dev)
 {
 	int i = 0;
@@ -891,6 +957,20 @@ static unsigned int setexposure(struct gspca_dev *gspca_dev,
 			| ((expoMo10[3] & 0x30) >> 4));
 		break;
 	    }
+	case SENSOR_OM6802: {
+		__u8 gainOm[] =
+			{ 0xa0, 0x34, 0xe5, 0x00, 0x00, 0x00, 0x00, 0x10 };
+
+		if (expo > 0x03ff)
+			expo = 0x03ff;
+		 if (expo < 0x0001)
+			expo = 0x0001;
+		gainOm[3] = expo >> 2;
+		i2c_w8(gspca_dev, gainOm);
+		reg_w1(gspca_dev, 0x96, expo >> 5);
+		PDEBUG(D_CONF, "set exposure %d", gainOm[3]);
+		break;
+	    }
 	}
 	return expo;
 }
@@ -901,6 +981,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 	unsigned int expo;
 	__u8 k2;
 
+	k2 = sd->brightness >> 10;
 	switch (sd->sensor) {
 	case SENSOR_HV7131R:
 		expo = sd->brightness << 4;
@@ -915,9 +996,13 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 		expo = sd->brightness >> 4;
 		sd->exposure = setexposure(gspca_dev, expo);
 		break;
+	case SENSOR_OM6802:
+		expo = sd->brightness >> 6;
+		sd->exposure = setexposure(gspca_dev, expo);
+		k2 = sd->brightness >> 11;
+		break;
 	}
 
-	k2 = sd->brightness >> 10;
 	reg_w1(gspca_dev, 0x96, k2);
 }
 
@@ -1049,6 +1134,11 @@ static void sd_start(struct gspca_dev *gspca_dev)
 /*			reg1 = 0x06;	 * 640 clk 24Mz (done) */
 		}
 		break;
+	case SENSOR_OM6802:
+		om6802_InitSensor(gspca_dev);
+		reg1 = 0x46;		/* 640 clk 24Mz */
+		reg17 = 0x64;		/* 640 MCKSIZE */
+		break;
 	case SENSOR_OV7648:
 		ov7648_InitSensor(gspca_dev);
 		reg17 = 0xa2;
@@ -1174,6 +1264,7 @@ static void do_autogain(struct gspca_dev *gspca_dev)
 		default:
 /*		case SENSOR_MO4000: */
 /*		case SENSOR_MI0360: */
+/*		case SENSOR_OM6802: */
 			expotimes = sd->exposure;
 			expotimes += (luma_mean - delta) >> 6;
 			if (expotimes < 0)
@@ -1246,7 +1337,8 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev)
 		i2c_r5(gspca_dev, 0x09);
 		return (gspca_dev->usb_buf[0] << 8)
 			| gspca_dev->usb_buf[1];
-	case SENSOR_MO4000:
+	default:
+/*	case SENSOR_MO4000: */
 		i2c_r5(gspca_dev, 0x0e);
 		hexpo = 0;		/* gspca_dev->usb_buf[1] & 0x07; */
 		mexpo = 0x40;		/* gspca_dev->usb_buf[2] & 0xff; */
@@ -1254,7 +1346,8 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev)
 		PDEBUG(D_CONF, "exposure %d",
 			(hexpo << 10) | (mexpo << 2) | lexpo);
 		return (hexpo << 10) | (mexpo << 2) | lexpo;
-	default:
+#if 0
+/*jfm: not called*/
 /*	case SENSOR_OV7648:		* jfm: is it ok for 7648? */
 /*	case SENSOR_OV7660: */
 		/* read sensor exposure */
@@ -1264,7 +1357,9 @@ static unsigned int getexposure(struct gspca_dev *gspca_dev)
 		i2c_r5(gspca_dev, 0x08);
 		mexpo = gspca_dev->usb_buf[2];
 		return (hexpo << 10) | (mexpo << 2) | lexpo;
+#endif
 	}
+	/* not reached */
 }
 
 static void getbrightness(struct gspca_dev *gspca_dev)
@@ -1277,9 +1372,8 @@ static void getbrightness(struct gspca_dev *gspca_dev)
 		sd->brightness = getexposure(gspca_dev) >> 4;
 		break;
 	case SENSOR_MI0360:
-		sd->brightness = getexposure(gspca_dev) << 4;
-		break;
 	case SENSOR_MO4000:
+	case SENSOR_OM6802:
 		sd->brightness = getexposure(gspca_dev) << 4;
 		break;
 	}
@@ -1406,9 +1500,9 @@ static const __devinitdata struct usb_device_id device_table[] = {
 /*	{USB_DEVICE(0x0c45, 0x6108), BSI(SN9C120, OM6801, 0x??)}, */
 /*	{USB_DEVICE(0x0c45, 0x6122), BSI(SN9C110, ICM105C, 0x??)}, */
 /*	{USB_DEVICE(0x0c45, 0x6123), BSI(SN9C110, SanyoCCD, 0x??)}, */
-	{USB_DEVICE(0x0c45, 0x612a), BSI(SN9C325, OV7648, 0x21)},
-/* bw600.inf:
-	{USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, */
+	{USB_DEVICE(0x0c45, 0x6128), BSI(SN9C110, OM6802, 0x21)}, /*sn9c325?*/
+/*bw600.inf:*/
+	{USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, /*sn9c325?*/
 	{USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)},
 /*	{USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x??)}, */
 /*	{USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */
-- 
GitLab


From 49b57dba2f6425e9b42874b4dec2433b335fa69c Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:25 -0300
Subject: [PATCH 687/869] V4L/DVB (8664): gspca: The bridge/sensor of the
 webcam 093a:2621 is a PAC 7302.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/pac7311.c | 418 +++++++++++++++++++---------
 1 file changed, 294 insertions(+), 124 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 96cd7f644ad..034c00d6c0a 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -44,6 +44,10 @@ struct sd {
 	char tosof;	/* number of bytes before next start of frame */
 	signed char ag_cnt;
 #define AG_CNT_START 13
+
+	__u8 sensor;
+#define SENSOR_PAC7302 0
+#define SENSOR_PAC7311 1
 };
 
 /* V4L2 controls supported by the driver */
@@ -206,9 +210,158 @@ static const __u8 pac7311_jpeg_header[] = {
 	0x11, 0x00, 0x3f, 0x00
 };
 
+/* pac 7302 */
+static const __u8 probe_7302[] = {
+/*	index,value */
+	0xff, 0x01,		/* page 1 */
+	0x78, 0x00,		/* deactivate */
+	0xff, 0x01,
+	0x78, 0x40,		/* led off */
+};
+static const __u8 start_7302[] = {
+/*	index, len, [value]* */
+	0x00, 12,	0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80,
+			0x00, 0x00, 0x00, 0x00,
+	0x0d, 24,	0x03, 0x01, 0x00, 0xb5, 0x07, 0xcb, 0x00, 0x00,
+			0x07, 0xc8, 0x00, 0xea, 0x07, 0xcf, 0x07, 0xf7,
+			0x07, 0x7e, 0x01, 0x0b, 0x00, 0x00, 0x00, 0x11,
+	0x26, 2,	0xaa, 0xaa,
+	0x2e, 1,	0x31,
+	0x38, 1,	0x01,
+	0x3a, 3,	0x14, 0xff, 0x5a,
+	0x43, 11,	0x00, 0x0a, 0x18, 0x11, 0x01, 0x2c, 0x88, 0x11,
+			0x00, 0x54, 0x11,
+	0x55, 1,	0x00,
+	0x62, 4, 	0x10, 0x1e, 0x1e, 0x18,
+	0x6b, 1,	0x00,
+	0x6e, 3,	0x08, 0x06, 0x00,
+	0x72, 3,	0x00, 0xff, 0x00,
+	0x7d, 23,	0x01, 0x01, 0x58, 0x46, 0x50, 0x3c, 0x50, 0x3c,
+			0x54, 0x46, 0x54, 0x56, 0x52, 0x50, 0x52, 0x50,
+			0x56, 0x64, 0xa4, 0x00, 0xda, 0x00, 0x00,
+	0xa2, 10,	0x22, 0x2c, 0x3c, 0x54, 0x69, 0x7c, 0x9c, 0xb9,
+			0xd2, 0xeb,
+	0xaf, 1,	0x02,
+	0xb5, 2,	0x08, 0x08,
+	0xb8, 2,	0x08, 0x88,
+	0xc4, 4,	0xae, 0x01, 0x04, 0x01,
+	0xcc, 1,	0x00,
+	0xd1, 11,	0x01, 0x30, 0x49, 0x5e, 0x6f, 0x7f, 0x8e, 0xa9,
+			0xc1, 0xd7, 0xec,
+	0xdc, 1,	0x01,
+	0xff, 1,	0x01,
+	0x12, 3,	0x02, 0x00, 0x01,
+	0x3e, 2,	0x00, 0x00,
+	0x76, 5,	0x01, 0x20, 0x40, 0x00, 0xf2,
+	0x7c, 1,	0x00,
+	0x7f, 10,	0x4b, 0x0f, 0x01, 0x2c, 0x02, 0x58, 0x03, 0x20,
+			0x02, 0x00,
+	0x96, 5,	0x01, 0x10, 0x04, 0x01, 0x04,
+	0xc8, 17,	0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
+			0x07, 0x00, 0x01, 0x07, 0x04, 0x01,
+			0x01,
+	0xdb, 2,	0x00, 0x01,
+	0xde, 8,	0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00,
+	0xe6, 4,	0x00, 0x00, 0x00, 0x01,
+	0xeb, 1,	0x00,
+	0xff, 1,	0x02,
+	0x22, 1,	0x00,
+	0xff, 1,	0x03,
+	0x00, 255,			/* load the page 3 */
+	0x11, 1,	0x01,
+	0xff, 1,	0x02,
+	0x13, 1,	0x00,
+	0x22, 4,	0x1f, 0xa4, 0xf0, 0x96,
+	0x27, 2,	0x14, 0x0c,
+	0x2a, 5,	0xc8, 0x00, 0x18, 0x12, 0x22,
+	0x64, 8,	0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44,
+	0x6e, 1,	0x08,
+	0xff, 1,	0x03,
+	0x78, 1,	0x00,
+	0, 0				/* end of sequence */
+};
+
+/* page 3 - the value 0xaa says skip the index - see reg_w_page() */
+static const __u8 page3_7302[] = {
+	0x90, 0x40, 0x03, 0x50, 0xc2, 0x01, 0x14, 0x16,
+	0x14, 0x12, 0x00, 0x00, 0x00, 0x02, 0x33, 0x00,
+	0x0f, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x47, 0x01, 0xb3, 0x01, 0x00,
+	0x00, 0x08, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x21,
+	0x00, 0x00, 0x00, 0x54, 0xf4, 0x02, 0x52, 0x54,
+	0xa4, 0xb8, 0xe0, 0x2a, 0xf6, 0x00, 0x00, 0x00,
+	0x00, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0xfc, 0x00, 0xf2, 0x1f, 0x04, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0xc0, 0xc0, 0x10, 0x00, 0x00,
+	0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x40, 0xff, 0x03, 0x19, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0xc8, 0xc8, 0xc8,
+	0xc8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50,
+	0x08, 0x10, 0x24, 0x40, 0x00, 0x00, 0x00, 0x00,
+	0x01, 0x00, 0x02, 0x47, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x02, 0xfa, 0x00, 0x64, 0x5a, 0x28, 0x00,
+	0x00
+};
+
+/* pac 7311 */
+static const __u8 probe_7311[] = {
+	0x78, 0x40,	/* Bit_0=start stream, Bit_7=LED */
+	0x78, 0x40,	/* Bit_0=start stream, Bit_7=LED */
+	0x78, 0x44,	/* Bit_0=start stream, Bit_7=LED */
+	0xff, 0x04,
+	0x27, 0x80,
+	0x28, 0xca,
+	0x29, 0x53,
+	0x2a, 0x0e,
+	0xff, 0x01,
+	0x3e, 0x20,
+};
+
+static const __u8 start_7311[] = {
+/*	index, len, [value]* */
+	0xff, 1,	0x01,
+	0x02, 53,	0x48, 0x0a, 0x40, 0x08, 0x00, 0x00, 0x08, 0x00,
+			0x06, 0xff, 0x11, 0xff, 0x5a, 0x30, 0x90, 0x4c,
+			0x00, 0x07, 0x00, 0x0a, 0x10, 0x00, 0xa0, 0x10,
+			0x02, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x01, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00,
+	0x3e, 52,	0x00, 0x00, 0x78, 0x52, 0x4a, 0x52, 0x78, 0x6e,
+			0x48, 0x46, 0x48, 0x6e, 0x5f, 0x49, 0x42, 0x49,
+			0x5f, 0x5f, 0x49, 0x42, 0x49, 0x5f, 0x6e, 0x48,
+			0x46, 0x48, 0x6e, 0x78, 0x52, 0x4a, 0x52, 0x78,
+			0x00, 0x00, 0x09, 0x1b, 0x34, 0x49, 0x5c, 0x9b,
+			0xd0, 0xff,
+	0x78, 6,	0x44, 0x00, 0xf2, 0x01, 0x01, 0x80,
+	0x7f, 18,	0x2a, 0x1c, 0x00, 0xc8, 0x02, 0x58, 0x03, 0x84,
+			0x12, 0x00, 0x1a, 0x04, 0x08, 0x0c, 0x10, 0x14,
+			0x18, 0x20,
+	0x96, 3,	0x01, 0x08, 0x04,
+	0xa0, 4,	0x44, 0x44, 0x44, 0x04,
+	0xf0, 13,	0x01, 0x00, 0x00, 0x00, 0x22, 0x00, 0x20, 0x00,
+			0x3f, 0x00, 0x0a, 0x01, 0x00,
+	0xff, 1,	0x04,
+	0x00, 254,			/* load the page 4 */
+	0x11, 1,	0x01,
+	0, 0				/* end of sequence */
+};
+
+/* page 4 - the value 0xaa says skip the index - see reg_w_page() */
+static const __u8 page4_7311[] = {
+	0xaa, 0xaa, 0x04, 0x54, 0x07, 0x2b, 0x09, 0x0f,
+	0x09, 0x00, 0xaa, 0xaa, 0x07, 0x00, 0x00, 0x62,
+	0x08, 0xaa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, 0xaa,
+	0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x01,
+	0xca, 0x10, 0x06, 0x78, 0x00, 0x00, 0x00, 0x00,
+	0x23, 0x28, 0x04, 0x11, 0x00, 0x00
+};
+
 static void reg_w_buf(struct gspca_dev *gspca_dev,
-		  __u16 index,
-		  const char *buffer, __u16 len)
+		  __u8 index,
+		  const char *buffer, int len)
 {
 	memcpy(gspca_dev->usb_buf, buffer, len);
 	usb_control_msg(gspca_dev->dev,
@@ -221,7 +374,7 @@ static void reg_w_buf(struct gspca_dev *gspca_dev,
 }
 
 static __u8 reg_r(struct gspca_dev *gspca_dev,
-			     __u16 index)
+			     __u8 index)
 {
 	usb_control_msg(gspca_dev->dev,
 			usb_rcvctrlpipe(gspca_dev->dev, 0),
@@ -234,7 +387,7 @@ static __u8 reg_r(struct gspca_dev *gspca_dev,
 }
 
 static void reg_w(struct gspca_dev *gspca_dev,
-		  __u16 index,
+		  __u8 index,
 		  __u8 value)
 {
 	gspca_dev->usb_buf[0] = value;
@@ -246,6 +399,74 @@ static void reg_w(struct gspca_dev *gspca_dev,
 			500);
 }
 
+static void reg_w_seq(struct gspca_dev *gspca_dev,
+		const __u8 *seq, int len)
+{
+	while (--len >= 0) {
+		reg_w(gspca_dev, seq[0], seq[1]);
+		seq += 2;
+	}
+}
+
+/* load the beginning of a page */
+static void reg_w_page(struct gspca_dev *gspca_dev,
+			const __u8 *page, int len)
+{
+	int index;
+
+	for (index = 0; index < len; index++) {
+		if (page[index] == 0xaa)		/* skip this index */
+			continue;
+		gspca_dev->usb_buf[0] = page[index];
+		usb_control_msg(gspca_dev->dev,
+				usb_sndctrlpipe(gspca_dev->dev, 0),
+				0,			/* request */
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				0, index, gspca_dev->usb_buf, 1,
+				500);
+	}
+}
+
+/* output a variable sequence */
+static void reg_w_var(struct gspca_dev *gspca_dev,
+			const __u8 *seq)
+{
+	int index, len;
+
+	for (;;) {
+		index = *seq++;
+		len = *seq++;
+		switch (len) {
+		case 0:
+			return;
+		case 254:
+			reg_w_page(gspca_dev, page4_7311, sizeof page4_7311);
+			break;
+		case 255:
+			reg_w_page(gspca_dev, page3_7302, sizeof page3_7302);
+			break;
+		default:
+			if (len > 32) {
+				PDEBUG(D_ERR|D_STREAM,
+					"Incorrect variable sequence");
+				return;
+			}
+			while (len > 0) {
+				if (len < 8) {
+					reg_w_buf(gspca_dev, index, seq, len);
+					seq += len;
+					break;
+				}
+				reg_w_buf(gspca_dev, index, seq, 8);
+				seq += 8;
+				index += 8;
+				len -= 8;
+			}
+		}
+	}
+	/* not reached */
+}
+
 /* this function is called at probe time */
 static int sd_config(struct gspca_dev *gspca_dev,
 			const struct usb_device_id *id)
@@ -253,22 +474,23 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 
-	PDEBUG(D_CONF, "Find Sensor PAC7311");
-	reg_w(gspca_dev, 0x78, 0x40); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x40); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0xff, 0x04);
-	reg_w(gspca_dev, 0x27, 0x80);
-	reg_w(gspca_dev, 0x28, 0xca);
-	reg_w(gspca_dev, 0x29, 0x53);
-	reg_w(gspca_dev, 0x2a, 0x0e);
-	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x3e, 0x20);
-
 	cam = &gspca_dev->cam;
 	cam->epaddr = 0x05;
-	cam->cam_mode = vga_mode;
-	cam->nmodes = ARRAY_SIZE(vga_mode);
+
+	sd->sensor = id->driver_info;
+	if (sd->sensor == SENSOR_PAC7302) {
+		PDEBUG(D_CONF, "Find Sensor PAC7302");
+		reg_w_seq(gspca_dev, probe_7302, sizeof probe_7302);
+
+		cam->cam_mode = &vga_mode[2];	/* only 640x480 */
+		cam->nmodes = 1;
+	} else {
+		PDEBUG(D_CONF, "Find Sensor PAC7311");
+		reg_w_seq(gspca_dev, probe_7302, sizeof probe_7302);
+
+		cam->cam_mode = vga_mode;
+		cam->nmodes = ARRAY_SIZE(vga_mode);
+	}
 
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
@@ -283,10 +505,11 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	int brightness;
 
+	if (sd->sensor == SENSOR_PAC7302)
+		return;
 /*jfm: inverted?*/
 	brightness = BRIGHTNESS_MAX - sd->brightness;
 	reg_w(gspca_dev, 0xff, 0x04);
-/*	reg_w(gspca_dev, 0x0e, 0x00); */
 	reg_w(gspca_dev, 0x0f, brightness);
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
@@ -297,6 +520,8 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (sd->sensor == SENSOR_PAC7302)
+		return;
 	reg_w(gspca_dev, 0xff, 0x01);
 	reg_w(gspca_dev, 0x80, sd->contrast);
 	/* load registers to sensor (Bit 0, auto clear) */
@@ -308,6 +533,8 @@ static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (sd->sensor == SENSOR_PAC7302)
+		return;
 	reg_w(gspca_dev, 0xff, 0x01);
 	reg_w(gspca_dev, 0x10, sd->colors);
 	/* load registers to sensor (Bit 0, auto clear) */
@@ -340,75 +567,12 @@ static void sd_start(struct gspca_dev *gspca_dev)
 
 	sd->ffnb = 0;
 	sd->tosof = 0;
-	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w_buf(gspca_dev, 0x0002, "\x48\x0a\x40\x08\x00\x00\x08\x00", 8);
-	reg_w_buf(gspca_dev, 0x000a, "\x06\xff\x11\xff\x5a\x30\x90\x4c", 8);
-	reg_w_buf(gspca_dev, 0x0012, "\x00\x07\x00\x0a\x10\x00\xa0\x10", 8);
-	reg_w_buf(gspca_dev, 0x001a, "\x02\x00\x00\x00\x00\x0b\x01\x00", 8);
-	reg_w_buf(gspca_dev, 0x0022, "\x00\x00\x00\x00\x00\x00\x00\x00", 8);
-	reg_w_buf(gspca_dev, 0x002a, "\x00\x00\x00", 3);
-	reg_w_buf(gspca_dev, 0x003e, "\x00\x00\x78\x52\x4a\x52\x78\x6e", 8);
-	reg_w_buf(gspca_dev, 0x0046, "\x48\x46\x48\x6e\x5f\x49\x42\x49", 8);
-	reg_w_buf(gspca_dev, 0x004e, "\x5f\x5f\x49\x42\x49\x5f\x6e\x48", 8);
-	reg_w_buf(gspca_dev, 0x0056, "\x46\x48\x6e\x78\x52\x4a\x52\x78", 8);
-	reg_w_buf(gspca_dev, 0x005e, "\x00\x00\x09\x1b\x34\x49\x5c\x9b", 8);
-	reg_w_buf(gspca_dev, 0x0066, "\xd0\xff", 2);
-	reg_w_buf(gspca_dev, 0x0078, "\x44\x00\xf2\x01\x01\x80", 6);
-	reg_w_buf(gspca_dev, 0x007f, "\x2a\x1c\x00\xc8\x02\x58\x03\x84", 8);
-	reg_w_buf(gspca_dev, 0x0087, "\x12\x00\x1a\x04\x08\x0c\x10\x14", 8);
-	reg_w_buf(gspca_dev, 0x008f, "\x18\x20", 2);
-	reg_w_buf(gspca_dev, 0x0096, "\x01\x08\x04", 3);
-	reg_w_buf(gspca_dev, 0x00a0, "\x44\x44\x44\x04", 4);
-	reg_w_buf(gspca_dev, 0x00f0, "\x01\x00\x00\x00\x22\x00\x20\x00", 8);
-	reg_w_buf(gspca_dev, 0x00f8, "\x3f\x00\x0a\x01\x00", 5);
 
-	reg_w(gspca_dev, 0xff, 0x04);
-	reg_w(gspca_dev, 0x02, 0x04);
-	reg_w(gspca_dev, 0x03, 0x54);
-	reg_w(gspca_dev, 0x04, 0x07);
-	reg_w(gspca_dev, 0x05, 0x2b);
-	reg_w(gspca_dev, 0x06, 0x09);
-	reg_w(gspca_dev, 0x07, 0x0f);
-	reg_w(gspca_dev, 0x08, 0x09);
-	reg_w(gspca_dev, 0x09, 0x00);
-	reg_w(gspca_dev, 0x0c, 0x07);
-	reg_w(gspca_dev, 0x0d, 0x00);
-	reg_w(gspca_dev, 0x0e, 0x00);
-	reg_w(gspca_dev, 0x0f, 0x62);
-	reg_w(gspca_dev, 0x10, 0x08);
-	reg_w(gspca_dev, 0x12, 0x07);
-	reg_w(gspca_dev, 0x13, 0x00);
-	reg_w(gspca_dev, 0x14, 0x00);
-	reg_w(gspca_dev, 0x15, 0x00);
-	reg_w(gspca_dev, 0x16, 0x00);
-	reg_w(gspca_dev, 0x17, 0x00);
-	reg_w(gspca_dev, 0x18, 0x00);
-	reg_w(gspca_dev, 0x19, 0x00);
-	reg_w(gspca_dev, 0x1a, 0x00);
-	reg_w(gspca_dev, 0x1b, 0x03);
-	reg_w(gspca_dev, 0x1c, 0xa0);
-	reg_w(gspca_dev, 0x1d, 0x01);
-	reg_w(gspca_dev, 0x1e, 0xf4);
-	reg_w(gspca_dev, 0x21, 0x00);
-	reg_w(gspca_dev, 0x22, 0x08);
-	reg_w(gspca_dev, 0x24, 0x03);
-	reg_w(gspca_dev, 0x26, 0x00);
-	reg_w(gspca_dev, 0x27, 0x01);
-	reg_w(gspca_dev, 0x28, 0xca);
-	reg_w(gspca_dev, 0x29, 0x10);
-	reg_w(gspca_dev, 0x2a, 0x06);
-	reg_w(gspca_dev, 0x2b, 0x78);
-	reg_w(gspca_dev, 0x2c, 0x00);
-	reg_w(gspca_dev, 0x2d, 0x00);
-	reg_w(gspca_dev, 0x2e, 0x00);
-	reg_w(gspca_dev, 0x2f, 0x00);
-	reg_w(gspca_dev, 0x30, 0x23);
-	reg_w(gspca_dev, 0x31, 0x28);
-	reg_w(gspca_dev, 0x32, 0x04);
-	reg_w(gspca_dev, 0x33, 0x11);
-	reg_w(gspca_dev, 0x34, 0x00);
-	reg_w(gspca_dev, 0x35, 0x00);
-	reg_w(gspca_dev, 0x11, 0x01);
+	if (sd->sensor == SENSOR_PAC7302)
+		reg_w_var(gspca_dev, start_7302);
+	else
+		reg_w_var(gspca_dev, start_7311);
+
 	setcontrast(gspca_dev);
 	setbrightness(gspca_dev);
 	setcolors(gspca_dev);
@@ -416,7 +580,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 
 	/* set correct resolution */
 	switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) {
-	case 2:					/* 160x120 */
+	case 2:					/* 160x120 pac7311 */
 		reg_w(gspca_dev, 0xff, 0x04);
 		reg_w(gspca_dev, 0x02, 0x03);
 		reg_w(gspca_dev, 0xff, 0x01);
@@ -426,7 +590,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 /*		reg_w(gspca_dev, 0x80, 0x69); */
 		reg_w(gspca_dev, 0x87, 0x10);
 		break;
-	case 1:					/* 320x240 */
+	case 1:					/* 320x240 pac7311 */
 		reg_w(gspca_dev, 0xff, 0x04);
 		reg_w(gspca_dev, 0x02, 0x03);
 		reg_w(gspca_dev, 0xff, 0x01);
@@ -436,6 +600,8 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		reg_w(gspca_dev, 0x87, 0x11);
 		break;
 	case 0:					/* 640x480 */
+		if (sd->sensor == SENSOR_PAC7302)
+			break;
 		reg_w(gspca_dev, 0xff, 0x04);
 		reg_w(gspca_dev, 0x02, 0x03);
 		reg_w(gspca_dev, 0xff, 0x01);
@@ -448,12 +614,25 @@ static void sd_start(struct gspca_dev *gspca_dev)
 
 	/* start stream */
 	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x78, 0x04);
-	reg_w(gspca_dev, 0x78, 0x05);
+	if (sd->sensor == SENSOR_PAC7302) {
+		reg_w(gspca_dev, 0x78, 0x01);
+		reg_w(gspca_dev, 0xff, 0x01);
+		reg_w(gspca_dev, 0x78, 0x01);
+	} else {
+		reg_w(gspca_dev, 0x78, 0x04);
+		reg_w(gspca_dev, 0x78, 0x05);
+	}
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->sensor == SENSOR_PAC7302) {
+		reg_w(gspca_dev, 0x78, 0x00);
+		reg_w(gspca_dev, 0x78, 0x00);
+		return;
+	}
 	reg_w(gspca_dev, 0xff, 0x04);
 	reg_w(gspca_dev, 0x27, 0x80);
 	reg_w(gspca_dev, 0x28, 0xca);
@@ -468,21 +647,17 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->sensor == SENSOR_PAC7302) {
+		reg_w(gspca_dev, 0xff, 0x01);
+		reg_w(gspca_dev, 0x78, 0x40);
+	}
 }
 
 /* this function is called at close time */
 static void sd_close(struct gspca_dev *gspca_dev)
 {
-	reg_w(gspca_dev, 0xff, 0x04);
-	reg_w(gspca_dev, 0x27, 0x80);
-	reg_w(gspca_dev, 0x28, 0xca);
-	reg_w(gspca_dev, 0x29, 0x53);
-	reg_w(gspca_dev, 0x2a, 0x0e);
-	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x3e, 0x20);
-	reg_w(gspca_dev, 0x78, 0x04); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
 }
 
 static void do_autogain(struct gspca_dev *gspca_dev)
@@ -509,10 +684,17 @@ static void do_autogain(struct gspca_dev *gspca_dev)
 		else if (Gbright < 4)
 			Gbright = 4;
 		PDEBUG(D_FRAM, "gbright %d", Gbright);
-		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x0f, Gbright);
-		/* load registers to sensor (Bit 0, auto clear) */
-		reg_w(gspca_dev, 0x11, 0x01);
+		if (sd->sensor == SENSOR_PAC7302) {
+			reg_w(gspca_dev, 0xff, 0x03);
+			reg_w(gspca_dev, 0x10, Gbright);
+			/* load registers to sensor (Bit 0, auto clear) */
+			reg_w(gspca_dev, 0x11, 0x01);
+		} else {
+			reg_w(gspca_dev, 0xff, 0x04);
+			reg_w(gspca_dev, 0x0f, Gbright);
+			/* load registers to sensor (Bit 0, auto clear) */
+			reg_w(gspca_dev, 0x11, 0x01);
+		}
 	}
 }
 
@@ -636,15 +818,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	}
 }
 
-static void getbrightness(struct gspca_dev *gspca_dev)
-{
-/*	sd->brightness = reg_r(gspca_dev, 0x08);
-	return sd->brightness;	*/
-/*	PDEBUG(D_CONF, "Called pac7311_getbrightness: Not implemented yet"); */
-}
-
-
-
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -659,7 +832,6 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	getbrightness(gspca_dev);
 	*val = sd->brightness;
 	return 0;
 }
@@ -678,7 +850,6 @@ static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-/*	getcontrast(gspca_dev); */
 	*val = sd->contrast;
 	return 0;
 }
@@ -697,7 +868,6 @@ static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-/*	getcolors(gspca_dev); */
 	*val = sd->colors;
 	return 0;
 }
@@ -737,13 +907,13 @@ static struct sd_desc sd_desc = {
 
 /* -- module initialisation -- */
 static __devinitdata struct usb_device_id device_table[] = {
-	{USB_DEVICE(0x093a, 0x2600)},
-	{USB_DEVICE(0x093a, 0x2601)},
-	{USB_DEVICE(0x093a, 0x2603)},
-	{USB_DEVICE(0x093a, 0x2608)},
-	{USB_DEVICE(0x093a, 0x260e)},
-	{USB_DEVICE(0x093a, 0x260f)},
-	{USB_DEVICE(0x093a, 0x2621)},
+	{USB_DEVICE(0x093a, 0x2600), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x2601), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x2603), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x2608), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311},
+	{USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
-- 
GitLab


From 9d5c1251bfc10a0e864352f45e272331f65b3420 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:26 -0300
Subject: [PATCH 688/869] V4L/DVB (8665): gspca: Fix the 640x480 resolution of
 the webcam 093a:2621.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/sonixj.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 151e1b625b0..0a20db87a47 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1136,7 +1136,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		break;
 	case SENSOR_OM6802:
 		om6802_InitSensor(gspca_dev);
-		reg1 = 0x46;		/* 640 clk 24Mz */
 		reg17 = 0x64;		/* 640 MCKSIZE */
 		break;
 	case SENSOR_OV7648:
-- 
GitLab


From 8559e8da31f37e2916195f44bbe79a61008782df Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:27 -0300
Subject: [PATCH 689/869] V4L/DVB (8666): gspca: Bad scanning of frames in
 pac7311.

The previous change in packet scanning did not work,
Also, autogain was no more treated at interrupt level.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/pac7311.c | 33 ++++++++++++++++++++---------
 1 file changed, 23 insertions(+), 10 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 034c00d6c0a..730b4a1aed9 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -702,8 +702,16 @@ static void do_autogain(struct gspca_dev *gspca_dev)
 static void put_jpeg_head(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
 	unsigned char tmpbuf[4];
 
+	if (sd->ag_cnt >= 0) {
+		if (--sd->ag_cnt < 0) {
+			sd->ag_cnt = AG_CNT_START;
+			atomic_set(&sd->avg_lum, sd->lum_sum / AG_CNT_START);
+			atomic_set(&sd->do_gain, 1);
+		}
+	}
 	gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
 			(__u8 *) pac7311_jpeg_header,
 			12);
@@ -727,7 +735,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	int i;
 
-#define INTER_FRAME 0x53
+#define INTER_FRAME 0x53	/* eof + inter frame + sof */
 #define LUM_OFFSET 0x1e		/* reverse offset / start of frame */
 
 	/*
@@ -746,11 +754,18 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	if (sd->tosof == 0) {	/* if inside a frame */
 
 		/* check for 'ff ff ff xx' at start and at end of packet */
-		/* (len is always >= 3) */
+		/* (len is always >= 3 and xx never ff) */
 		switch (sd->ffnb) {
 		case 1:
-			if (data[0] != 0xff)
+			if (data[0] != 0xff) {	/* can be '00' only */
+				__u8 ff;
+
+				sd->ffnb = 0;
+				ff = 0xff;
+				gspca_frame_add(gspca_dev, INTER_PACKET,
+						frame, &ff, 1);
 				break;		/* keep 'ff 00' */
+			}
 			/* fall thru */
 		case 2:
 		case 3:
@@ -775,16 +790,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 		}
 	} else {		/* outside a frame */
 
-		/*
-		 * get the luminosity
-		 * and go to the start of frame
-		 */
+		/* get the luminosity and go to the start of frame */
 		data += sd->tosof;
 		len -= sd->tosof;
 		if (sd->tosof > LUM_OFFSET)
 			sd->lum_sum += data[-LUM_OFFSET];
-		put_jpeg_head(gspca_dev, frame);
 		sd->tosof = 0;
+		put_jpeg_head(gspca_dev, frame);
 	}
 
 	for (i = 0; i < len; i++) {
@@ -792,10 +804,9 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			continue;
 		switch (data[i + 1]) {
 		case 0xd9:		/* end of frame */
-			i += 2;
 			frame = gspca_frame_add(gspca_dev,
 						LAST_PACKET,
-						frame, data, i);
+						frame, data, i + 2);
 			data += i + INTER_FRAME;
 			len -= i + INTER_FRAME;
 			i = 0;
@@ -816,6 +827,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			break;
 		}
 	}
+	gspca_frame_add(gspca_dev, INTER_PACKET,
+			frame, data, i);
 }
 
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
-- 
GitLab


From 3466234229e6535a061f5f63a87bfb12c833d96a Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 16:47:28 -0300
Subject: [PATCH 690/869] V4L/DVB (8667): gspca: Bad probe of Z-Star/Vimicro
 webcams with pas106 sensor.

This patch moves the detection of the 2wr SIF pas106b sensor to before
detecting other sensors.
Patch change by jfm: Check SIF for identified webcams only.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/zc3xx.c | 31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index bc7d0eedcd8..d36f4d7d22b 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -6964,8 +6964,13 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev)
 	case SENSOR_MC501CB:
 		return -1;		/* don't probe */
 	case SENSOR_TAS5130C_VF0250:
-				/* may probe but with write in reg 0x0010 */
+			/* may probe but with no write in reg 0x0010 */
 		return -1;		/* don't probe */
+	case SENSOR_PAS106:
+		sensor =  sif_probe(gspca_dev);
+		if (sensor >= 0)
+			return sensor;
+		break;
 	}
 	sensor = vga_2wr_probe(gspca_dev);
 	if (sensor >= 0) {
@@ -6974,12 +6979,10 @@ static int zcxx_probeSensor(struct gspca_dev *gspca_dev)
 		/* next probe is needed for OmniVision ? */
 	}
 	sensor2 = vga_3wr_probe(gspca_dev);
-	if (sensor2 >= 0) {
-		if (sensor >= 0)
-			return sensor;
-		return sensor2;
-	}
-	return sif_probe(gspca_dev);
+	if (sensor2 >= 0
+	    && sensor >= 0)
+		return sensor;
+	return sensor2;
 }
 
 /* this function is called at probe time */
@@ -7502,14 +7505,14 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x041e)},
 #ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x041e, 0x4017)},
-	{USB_DEVICE(0x041e, 0x401c)},
+	{USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x401e)},
 	{USB_DEVICE(0x041e, 0x401f)},
 #endif
 	{USB_DEVICE(0x041e, 0x4029)},
 #ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x041e, 0x4034)},
-	{USB_DEVICE(0x041e, 0x4035)},
+	{USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x4036)},
 	{USB_DEVICE(0x041e, 0x403a)},
 #endif
@@ -7541,10 +7544,10 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x046d, 0x08d8)},
 	{USB_DEVICE(0x046d, 0x08da)},
 	{USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
-	{USB_DEVICE(0x0471, 0x0325)},
-	{USB_DEVICE(0x0471, 0x0326)},
-	{USB_DEVICE(0x0471, 0x032d)},
-	{USB_DEVICE(0x0471, 0x032e)},
+	{USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x0471, 0x0326), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x055f, 0xc005)},
 #ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x055f, 0xd003)},
-- 
GitLab


From 5bb0f21a46281b021897d2c56d50685c1939b5ee Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:29 -0300
Subject: [PATCH 691/869] V4L/DVB (8668): gspca: Conflict GSPCA / ET61X251 for
 the webcam 102c:6251.

Fix a double handling of 102c:6251 and no handling of 102c:6151
when both drivers GSPCA and ET61X251.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/etoms.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index 1dbe92d01e6..ca23c3f9aaa 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -904,10 +904,10 @@ static struct sd_desc sd_desc = {
 
 /* -- module initialisation -- */
 static __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_ET61X251
 	{USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106},
-#endif
+#ifndef CONFIG_USB_ET61X251
 	{USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX},
+#endif
 	{}
 };
 
-- 
GitLab


From 6c9d3c59e6fdb8dfadaf7ba38f1d0b64ff066b36 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:30 -0300
Subject: [PATCH 692/869] V4L/DVB (8669): gspca: Add white balance control for
 spca561 rev 012A.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/spca561.c | 110 +++++++++++++++++++++++-----
 1 file changed, 92 insertions(+), 18 deletions(-)

diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 1073ac3d2ec..02e274452c4 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -34,6 +34,7 @@ struct sd {
 
 	unsigned short contrast;
 	__u8 brightness;
+	__u8 white;
 	__u8 autogain;
 
 	__u8 chip_revision;
@@ -46,11 +47,12 @@ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
-#define SD_BRIGHTNESS 0
 	{
 	 {
 	  .id = V4L2_CID_BRIGHTNESS,
@@ -59,12 +61,12 @@ static struct ctrl sd_ctrls[] = {
 	  .minimum = 0,
 	  .maximum = 63,
 	  .step = 1,
-	  .default_value = 32,
+#define BRIGHTNESS_DEF 32
+		.default_value = BRIGHTNESS_DEF,
 	  },
 	 .set = sd_setbrightness,
 	 .get = sd_getbrightness,
 	 },
-#define SD_CONTRAST 1
 	{
 	 {
 	  .id = V4L2_CID_CONTRAST,
@@ -73,12 +75,26 @@ static struct ctrl sd_ctrls[] = {
 	  .minimum = 0,
 	  .maximum = 0x3fff,
 	  .step = 1,
-	  .default_value = 0x2000,
+#define CONTRAST_DEF 0x2000
+		.default_value = CONTRAST_DEF,
 	  },
 	 .set = sd_setcontrast,
 	 .get = sd_getcontrast,
 	 },
-#define SD_AUTOGAIN 2
+	{
+	    {
+		.id = V4L2_CID_DO_WHITE_BALANCE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "While Balance",
+		.minimum = 0,
+		.maximum = 0x7f,
+		.step = 1,
+#define WHITE_DEF 40
+		.default_value = WHITE_DEF,
+		},
+		.set = sd_setwhite,
+		.get = sd_getwhite,
+	    },
 	{
 	 {
 	  .id = V4L2_CID_AUTOGAIN,
@@ -87,7 +103,8 @@ static struct ctrl sd_ctrls[] = {
 	  .minimum = 0,
 	  .maximum = 1,
 	  .step = 1,
-	  .default_value = 1,
+#define AUTOGAIN_DEF 1
+	  .default_value = AUTOGAIN_DEF,
 	  },
 	 .set = sd_setautogain,
 	 .get = sd_getautogain,
@@ -438,7 +455,7 @@ static const __u16 spca561_init_data[][2] = {
 	{0x0035, 0x8801},	/* 0x14 - set gain general */
 	{0x001f, 0x8805},	/* 0x14 */
 	{0x0000, 0x8800},
-	{0x0030, 0x8112},
+	{0x000e, 0x8112},	/* white balance - was 30 */
 	{}
 };
 
@@ -478,9 +495,10 @@ static const __u16 Pb100_2map8300[][2] = {
 };
 
 static const __u16 spca561_161rev12A_data1[][2] = {
-	{0x21, 0x8118},
-	{0x01, 0x8114},
-	{0x00, 0x8112},
+	{0x29, 0x8118},		/* white balance - was 21 */
+	{0x08, 0x8114},		/* white balance - was 01 */
+	{0x0e, 0x8112},		/* white balance - was 00 */
+	{0x00, 0x8102},		/* white balance - new */
 	{0x92, 0x8804},
 	{0x04, 0x8802},		/* windows uses 08 */
 	{}
@@ -505,14 +523,16 @@ static const __u16 spca561_161rev12A_data2[][2] = {
 	{0xb0, 0x8603},
 
 	/* sensor gains */
+	{0x07, 0x8601},		/* white balance - new */
+	{0x07, 0x8602},		/* white balance - new */
 	{0x00, 0x8610},		/* *red */
 	{0x00, 0x8611},		/* 3f   *green */
 	{0x00, 0x8612},		/* green *blue */
 	{0x00, 0x8613},		/* blue *green */
-	{0x35, 0x8614},		/* green *red */
-	{0x35, 0x8615},		/* 40   *green */
-	{0x35, 0x8616},		/* 7a   *blue */
-	{0x35, 0x8617},		/* 40   *green */
+	{0x43, 0x8614},		/* green *red - white balance - was 0x35 */
+	{0x40, 0x8615},		/* 40   *green - white balance - was 0x35 */
+	{0x71, 0x8616},		/* 7a   *blue - white balance - was 0x35 */
+	{0x40, 0x8617},		/* 40   *green - white balance - was 0x35 */
 
 	{0x0c, 0x8620},		/* 0c */
 	{0xc8, 0x8631},		/* c8 */
@@ -527,6 +547,7 @@ static const __u16 spca561_161rev12A_data2[][2] = {
 	{0xdf, 0x863c},		/* df */
 	{0xf0, 0x8505},
 	{0x32, 0x850a},
+	{0x99, 0x8700},		/* - white balance - new */
 	{}
 };
 
@@ -588,9 +609,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
 
 	sd->chip_revision = id->driver_info;
-	sd->brightness = sd_ctrls[SD_BRIGHTNESS].qctrl.default_value;
-	sd->contrast = sd_ctrls[SD_CONTRAST].qctrl.default_value;
-	sd->autogain = sd_ctrls[SD_AUTOGAIN].qctrl.default_value;
+	sd->brightness = BRIGHTNESS_DEF;
+	sd->contrast = CONTRAST_DEF;
+	sd->autogain = AUTOGAIN_DEF;
+	sd->white = WHITE_DEF;
 	return 0;
 }
 
@@ -628,15 +650,18 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		reg_w_val(dev, lowb, 0x8653);
 		reg_w_val(dev, lowb, 0x8654);
 		break;
-	case Rev012A: {
+	default: {
+/*	case Rev012A: { */
 		__u8 Reg8391[] =
 			{ 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00 };
 
 		/* Write camera sensor settings */
 		expotimes = (sd->contrast >> 5) & 0x07ff;
+		/* exposure is in 8309 2b, range 0120 - 5720 */
 		Reg8391[0] = expotimes & 0xff;	/* exposure */
 		Reg8391[1] = 0x18 | (expotimes >> 8);
 		Reg8391[2] = sd->brightness;	/* gain */
+		/* gain in 8335, 2b range 0000 - 2400 */
 		reg_w_buf(gspca_dev, 0x8391, Reg8391, 8);
 		reg_w_buf(gspca_dev, 0x8390, Reg8391, 8);
 		break;
@@ -644,6 +669,34 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	}
 }
 
+static void setwhite(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	__u16 white;
+	__u8 reg8614, reg8616;
+
+	switch (sd->chip_revision) {
+	case Rev072A:
+		/* no such hardware */
+		break;
+	default:
+/*	case Rev012A: */
+		white = sd->white;
+		if (sd->white == 0) {
+			PDEBUG(D_CONF, "Discarding null whiteness");
+			break;
+		}
+		/* try to emulate MS-win as possible */
+		if (white < 0x45)
+			reg8616 = white;
+		else
+			reg8616 = 0x93 + (white >> 2);
+		reg8614 = 0x28 + (white >> 4);
+		reg_w_val(gspca_dev->dev, reg8616, 0x8616);
+		reg_w_val(gspca_dev->dev, reg8614, 0x8614);
+	}
+}
+
 static void setautogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -714,6 +767,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20);
 		reg_w_val(gspca_dev->dev, 0x850b, 0x03);
 		setcontrast(gspca_dev);
+		setwhite(gspca_dev);
 		break;
 	}
 }
@@ -721,6 +775,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
 	reg_w_val(gspca_dev->dev, 0x8112, 0x20);
+	reg_w_val(gspca_dev->dev, 0x8102, 0x00); /* white balance - new */
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
@@ -968,6 +1023,25 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+/* white balance - new */
+static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->white = val;
+	if (gspca_dev->streaming)
+		setwhite(gspca_dev);
+	return 0;
+}
+
+static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->white;
+	return 0;
+}
+
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
-- 
GitLab


From a0b508c2d7d0de0e46555793e334e35381716825 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:31 -0300
Subject: [PATCH 693/869] V4L/DVB (8671): gspca: Remove the unused field
 'dev_name' of the device structure.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/gspca.h   | 1 -
 drivers/media/video/gspca/pac207.c  | 1 -
 drivers/media/video/gspca/spca561.c | 1 -
 3 files changed, 3 deletions(-)

diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 67e448940ea..5cb584546ee 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -56,7 +56,6 @@ extern int gspca_debug;
 
 /* device information - set at probe time */
 struct cam {
-	char *dev_name;
 	struct v4l2_pix_format *cam_mode;	/* size nmodes */
 	char nmodes;
 	__u8 epaddr;
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index 7ef18d57881..cee45b0486c 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -271,7 +271,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		" (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x05;
 	cam->cam_mode = sif_mode;
 	cam->nmodes = ARRAY_SIZE(sif_mode);
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 02e274452c4..a9f7c99e6f5 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -602,7 +602,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	}
 
 	cam = &gspca_dev->cam;
-	cam->dev_name = (char *) id->driver_info;
 	cam->epaddr = 0x01;
 	gspca_dev->nbalt = 7 + 1;	/* choose alternate 7 first */
 	cam->cam_mode = sif_mode;
-- 
GitLab


From 7879d459f1601be742d0d63930d17cd4aac956fd Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:32 -0300
Subject: [PATCH 694/869] V4L/DVB (8672): gspca: Big rewrite of spca561.

Bug register/value inversions in USB exchanges.
Exposure and gain controls added for rev 12a.
Separate the functions and controls of the revisions 12a and 72a.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/spca561.c | 596 ++++++++++++++++------------
 1 file changed, 336 insertions(+), 260 deletions(-)

diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index a9f7c99e6f5..0a2b8bc5b85 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -32,85 +32,44 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 
-	unsigned short contrast;
-	__u8 brightness;
-	__u8 white;
+	__u16 contrast;			/* rev72a only */
+#define CONTRAST_MIN 0x0000
+#define CONTRAST_DEF 0x2000
+#define CONTRAST_MAX 0x3fff
+
+	__u16 exposure;			/* rev12a only */
+#define EXPOSURE_MIN 0x0120
+#define EXPOSURE_DEF 0x20ae
+#define EXPOSURE_MAX 0x5720
+
+	__u8 brightness;		/* rev72a only */
+#define BRIGHTNESS_MIN 0
+#define BRIGHTNESS_DEF 32
+#define BRIGHTNESS_MAX 63
+
+	__u8 white;			/* rev12a only */
+#define WHITE_MIN 0
+#define WHITE_DEF 0x40
+#define WHITE_MAX 0x7f
+
 	__u8 autogain;
+#define AUTOGAIN_MIN 0
+#define AUTOGAIN_DEF 1
+#define AUTOGAIN_MAX 1
+
+	__u8 gain;			/* rev12a only */
+#define GAIN_MIN 0x0
+#define GAIN_DEF 0x24
+#define GAIN_MAX 0x24
 
 	__u8 chip_revision;
+#define Rev012A 0
+#define Rev072A 1
+
 	signed char ag_cnt;
 #define AG_CNT_START 13
 };
 
-/* V4L2 controls supported by the driver */
-static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getcontrast(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val);
-static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
-static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
-
-static struct ctrl sd_ctrls[] = {
-	{
-	 {
-	  .id = V4L2_CID_BRIGHTNESS,
-	  .type = V4L2_CTRL_TYPE_INTEGER,
-	  .name = "Brightness",
-	  .minimum = 0,
-	  .maximum = 63,
-	  .step = 1,
-#define BRIGHTNESS_DEF 32
-		.default_value = BRIGHTNESS_DEF,
-	  },
-	 .set = sd_setbrightness,
-	 .get = sd_getbrightness,
-	 },
-	{
-	 {
-	  .id = V4L2_CID_CONTRAST,
-	  .type = V4L2_CTRL_TYPE_INTEGER,
-	  .name = "Contrast",
-	  .minimum = 0,
-	  .maximum = 0x3fff,
-	  .step = 1,
-#define CONTRAST_DEF 0x2000
-		.default_value = CONTRAST_DEF,
-	  },
-	 .set = sd_setcontrast,
-	 .get = sd_getcontrast,
-	 },
-	{
-	    {
-		.id = V4L2_CID_DO_WHITE_BALANCE,
-		.type = V4L2_CTRL_TYPE_INTEGER,
-		.name = "While Balance",
-		.minimum = 0,
-		.maximum = 0x7f,
-		.step = 1,
-#define WHITE_DEF 40
-		.default_value = WHITE_DEF,
-		},
-		.set = sd_setwhite,
-		.get = sd_getwhite,
-	    },
-	{
-	 {
-	  .id = V4L2_CID_AUTOGAIN,
-	  .type = V4L2_CTRL_TYPE_BOOLEAN,
-	  .name = "Auto Gain",
-	  .minimum = 0,
-	  .maximum = 1,
-	  .step = 1,
-#define AUTOGAIN_DEF 1
-	  .default_value = AUTOGAIN_DEF,
-	  },
-	 .set = sd_setautogain,
-	 .get = sd_getautogain,
-	 },
-};
-
 static struct v4l2_pix_format sif_mode[] = {
 	{160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
 		.bytesperline = 160,
@@ -160,12 +119,8 @@ static struct v4l2_pix_format sif_mode[] = {
 #define SPCA561_INDEX_I2C_BASE 0x8800
 #define SPCA561_SNAPBIT 0x20
 #define SPCA561_SNAPCTRL 0x40
-enum {
-	Rev072A = 0,
-	Rev012A,
-};
 
-static void reg_w_val(struct usb_device *dev, __u16 index, __u16 value)
+static void reg_w_val(struct usb_device *dev, __u16 index, __u8 value)
 {
 	int ret;
 
@@ -215,12 +170,6 @@ static void reg_w_buf(struct gspca_dev *gspca_dev,
 			index, gspca_dev->usb_buf, len, 500);
 }
 
-static void i2c_init(struct gspca_dev *gspca_dev, __u8 mode)
-{
-	reg_w_val(gspca_dev->dev, 0x92, 0x8804);
-	reg_w_val(gspca_dev->dev, mode, 0x8802);
-}
-
 static void i2c_write(struct gspca_dev *gspca_dev, __u16 valeur, __u16 reg)
 {
 	int retry = 60;
@@ -229,9 +178,9 @@ static void i2c_write(struct gspca_dev *gspca_dev, __u16 valeur, __u16 reg)
 
 	DataLow = valeur;
 	DataHight = valeur >> 8;
-	reg_w_val(gspca_dev->dev, reg, 0x8801);
-	reg_w_val(gspca_dev->dev, DataLow, 0x8805);
-	reg_w_val(gspca_dev->dev, DataHight, 0x8800);
+	reg_w_val(gspca_dev->dev, 0x8801, reg);
+	reg_w_val(gspca_dev->dev, 0x8805, DataLow);
+	reg_w_val(gspca_dev->dev, 0x8800, DataHight);
 	while (retry--) {
 		reg_r(gspca_dev, 0x8803, 1);
 		if (!gspca_dev->usb_buf[0])
@@ -245,9 +194,9 @@ static int i2c_read(struct gspca_dev *gspca_dev, __u16 reg, __u8 mode)
 	__u8 value;
 	__u8 vallsb;
 
-	reg_w_val(gspca_dev->dev, 0x92, 0x8804);
-	reg_w_val(gspca_dev->dev, reg, 0x8801);
-	reg_w_val(gspca_dev->dev, (mode | 0x01), 0x8802);
+	reg_w_val(gspca_dev->dev, 0x8804, 0x92);
+	reg_w_val(gspca_dev->dev, 0x8801, reg);
+	reg_w_val(gspca_dev->dev, 0x8802, (mode | 0x01));
 	while (retry--) {
 		reg_r(gspca_dev, 0x8803, 1);
 		if (!gspca_dev->usb_buf)
@@ -459,17 +408,6 @@ static const __u16 spca561_init_data[][2] = {
 	{}
 };
 
-static void sensor_reset(struct gspca_dev *gspca_dev)
-{
-	reg_w_val(gspca_dev->dev, 0x8631, 0xc8);
-	reg_w_val(gspca_dev->dev, 0x8634, 0xc8);
-	reg_w_val(gspca_dev->dev, 0x8112, 0x00);
-	reg_w_val(gspca_dev->dev, 0x8114, 0x00);
-	reg_w_val(gspca_dev->dev, 0x8118, 0x21);
-	i2c_init(gspca_dev, 0x14);
-	i2c_write(gspca_dev, 1, 0x0d);
-	i2c_write(gspca_dev, 0, 0x0d);
-}
 
 /******************** QC Express etch2 stuff ********************/
 static const __u16 Pb100_1map8300[][2] = {
@@ -479,9 +417,9 @@ static const __u16 Pb100_1map8300[][2] = {
 	{0x8303, 0x0125},	/* image area */
 	{0x8304, 0x0169},
 	{0x8328, 0x000b},
-	{0x833c, 0x0001},
+	{0x833c, 0x0001},		/*fixme: win:07*/
 
-	{0x832f, 0x0419},
+	{0x832f, 0x1904},		/*fixme: was 0419*/
 	{0x8307, 0x00aa},
 	{0x8301, 0x0003},
 	{0x8302, 0x000e},
@@ -547,7 +485,7 @@ static const __u16 spca561_161rev12A_data2[][2] = {
 	{0xdf, 0x863c},		/* df */
 	{0xf0, 0x8505},
 	{0x32, 0x850a},
-	{0x99, 0x8700},		/* - white balance - new */
+/*	{0x99, 0x8700},		 * - white balance - new (removed) */
 	{}
 };
 
@@ -566,9 +504,10 @@ static void sensor_mapwrite(struct gspca_dev *gspca_dev,
 }
 static void init_161rev12A(struct gspca_dev *gspca_dev)
 {
-	sensor_reset(gspca_dev);
+/*	sensor_reset(gspca_dev);	(not in win) */
 	write_vector(gspca_dev, spca561_161rev12A_data1);
 	sensor_mapwrite(gspca_dev, Pb100_1map8300);
+/*fixme: should be in sd_start*/
 	write_vector(gspca_dev, spca561_161rev12A_data2);
 	sensor_mapwrite(gspca_dev, Pb100_2map8300);
 }
@@ -605,32 +544,29 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	cam->epaddr = 0x01;
 	gspca_dev->nbalt = 7 + 1;	/* choose alternate 7 first */
 	cam->cam_mode = sif_mode;
-	cam->nmodes = sizeof sif_mode / sizeof sif_mode[0];
+	cam->nmodes = ARRAY_SIZE(sif_mode);
 
 	sd->chip_revision = id->driver_info;
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
-	sd->autogain = AUTOGAIN_DEF;
 	sd->white = WHITE_DEF;
+	sd->exposure = EXPOSURE_DEF;
+	sd->autogain = AUTOGAIN_DEF;
+	sd->gain = GAIN_DEF;
 	return 0;
 }
 
 /* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+static int sd_open_12a(struct gspca_dev *gspca_dev)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	switch (sd->chip_revision) {
-	case Rev072A:
-		PDEBUG(D_STREAM, "Chip revision id: 072a");
-		write_vector(gspca_dev, spca561_init_data);
-		break;
-	default:
-/*	case Rev012A: */
-		PDEBUG(D_STREAM, "Chip revision id: 012a");
-		init_161rev12A(gspca_dev);
-		break;
-	}
+	PDEBUG(D_STREAM, "Chip revision: 012a");
+	init_161rev12A(gspca_dev);
+	return 0;
+}
+static int sd_open_72a(struct gspca_dev *gspca_dev)
+{
+	PDEBUG(D_STREAM, "Chip revision: 072a");
+	write_vector(gspca_dev, spca561_init_data);
 	return 0;
 }
 
@@ -639,28 +575,20 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct usb_device *dev = gspca_dev->dev;
 	__u8 lowb;
-	int expotimes;
 
 	switch (sd->chip_revision) {
 	case Rev072A:
 		lowb = sd->contrast >> 8;
-		reg_w_val(dev, lowb, 0x8651);
-		reg_w_val(dev, lowb, 0x8652);
-		reg_w_val(dev, lowb, 0x8653);
-		reg_w_val(dev, lowb, 0x8654);
+		reg_w_val(dev, 0x8651, lowb);
+		reg_w_val(dev, 0x8652, lowb);
+		reg_w_val(dev, 0x8653, lowb);
+		reg_w_val(dev, 0x8654, lowb);
 		break;
 	default: {
 /*	case Rev012A: { */
-		__u8 Reg8391[] =
-			{ 0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00 };
-
-		/* Write camera sensor settings */
-		expotimes = (sd->contrast >> 5) & 0x07ff;
-		/* exposure is in 8309 2b, range 0120 - 5720 */
-		Reg8391[0] = expotimes & 0xff;	/* exposure */
-		Reg8391[1] = 0x18 | (expotimes >> 8);
-		Reg8391[2] = sd->brightness;	/* gain */
-		/* gain in 8335, 2b range 0000 - 2400 */
+		static const __u8 Reg8391[] =
+			{ 0x92, 0x30, 0x20, 0x00, 0x0c, 0x00, 0x00, 0x00 };
+
 		reg_w_buf(gspca_dev, 0x8391, Reg8391, 8);
 		reg_w_buf(gspca_dev, 0x8390, Reg8391, 8);
 		break;
@@ -668,32 +596,44 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 	}
 }
 
+/* rev12a only */
 static void setwhite(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	__u16 white;
 	__u8 reg8614, reg8616;
 
-	switch (sd->chip_revision) {
-	case Rev072A:
-		/* no such hardware */
-		break;
-	default:
-/*	case Rev012A: */
-		white = sd->white;
-		if (sd->white == 0) {
-			PDEBUG(D_CONF, "Discarding null whiteness");
-			break;
-		}
-		/* try to emulate MS-win as possible */
-		if (white < 0x45)
-			reg8616 = white;
-		else
-			reg8616 = 0x93 + (white >> 2);
-		reg8614 = 0x28 + (white >> 4);
-		reg_w_val(gspca_dev->dev, reg8616, 0x8616);
-		reg_w_val(gspca_dev->dev, reg8614, 0x8614);
+	white = sd->white;
+	if (sd->white == 0) {
+		PDEBUG(D_CONF, "Discarding null whiteness");
+		return;
 	}
+	/* try to emulate MS-win as possible */
+	if (white < 0x45)
+		reg8616 = white;
+	else
+		reg8616 = 0x93 + (white >> 2);
+	reg8614 = 0x28 + (white >> 4);
+	reg_w_val(gspca_dev->dev, 0x8616, reg8616);
+	reg_w_val(gspca_dev->dev, 0x8614, reg8614);
+}
+
+/* rev 12a only */
+static void setexposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct usb_device *dev = gspca_dev->dev;
+
+	reg_w_val(dev, 0x8309, sd->gain);
+}
+
+/* rev 12a only */
+static void setgain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct usb_device *dev = gspca_dev->dev;
+
+	reg_w_val(dev, 0x8335, sd->gain);
 }
 
 static void setautogain(struct gspca_dev *gspca_dev)
@@ -708,67 +648,67 @@ static void setautogain(struct gspca_dev *gspca_dev)
 	}
 }
 
-static void sd_start(struct gspca_dev *gspca_dev)
+static void sd_start_12a(struct gspca_dev *gspca_dev)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
 	struct usb_device *dev = gspca_dev->dev;
 	int Clck;
 	__u8 Reg8307[] = { 0xaa, 0x00 };
 	int mode;
 
 	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
-	switch (sd->chip_revision) {
-	case Rev072A:
-		switch (mode) {
-		default:
-/*		case 0:
-		case 1: */
-			Clck = 0x25;
-			break;
-		case 2:
-			Clck = 0x22;
-			break;
-		case 3:
-			Clck = 0x21;
-			break;
-		}
-		reg_w_val(dev, 0x8500, mode);	/* mode */
-		reg_w_val(dev, 0x8700, Clck);	/* 0x27 clock */
-		reg_w_val(dev, 0x8112, 0x10 | 0x20);
-		setautogain(gspca_dev);
+	switch (mode) {
+	case 0:
+	case 1:
+		Clck = 0x8a;
+		break;
+	case 2:
+		Clck = 0x85;
 		break;
 	default:
-/*	case Rev012A: */
-		switch (mode) {
-		case 0:
-		case 1:
-			Clck = 0x8a;
-			break;
-		case 2:
-			Clck = 0x85;
-			break;
-		default:
-			Clck = 0x83;
-			break;
-		}
-		if (mode <= 1) {
-			/* Use compression on 320x240 and above */
-			reg_w_val(dev, 0x8500, 0x10 | mode);
-		} else {
-			/* I couldn't get the compression to work below 320x240
-			 * Fortunately at these resolutions the bandwidth
-			 * is sufficient to push raw frames at ~20fps */
-			reg_w_val(dev, 0x8500, mode);
-		}		/* -- qq@kuku.eu.org */
-		reg_w_buf(gspca_dev, 0x8307, Reg8307, 2);
-		reg_w_val(gspca_dev->dev, 0x8700, Clck);
-						/* 0x8f 0x85 0x27 clock */
-		reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20);
-		reg_w_val(gspca_dev->dev, 0x850b, 0x03);
-		setcontrast(gspca_dev);
-		setwhite(gspca_dev);
+		Clck = 0x83;
+		break;
+	}
+	if (mode <= 1) {
+		/* Use compression on 320x240 and above */
+		reg_w_val(dev, 0x8500, 0x10 | mode);
+	} else {
+		/* I couldn't get the compression to work below 320x240
+		 * Fortunately at these resolutions the bandwidth
+		 * is sufficient to push raw frames at ~20fps */
+		reg_w_val(dev, 0x8500, mode);
+	}		/* -- qq@kuku.eu.org */
+	reg_w_buf(gspca_dev, 0x8307, Reg8307, 2);
+	reg_w_val(gspca_dev->dev, 0x8700, Clck);
+					/* 0x8f 0x85 0x27 clock */
+	reg_w_val(gspca_dev->dev, 0x8112, 0x1e | 0x20);
+	reg_w_val(gspca_dev->dev, 0x850b, 0x03);
+	setcontrast(gspca_dev);
+	setwhite(gspca_dev);
+}
+static void sd_start_72a(struct gspca_dev *gspca_dev)
+{
+	struct usb_device *dev = gspca_dev->dev;
+	int Clck;
+	int mode;
+
+	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	switch (mode) {
+	default:
+/*	case 0:
+	case 1: */
+		Clck = 0x25;
+		break;
+	case 2:
+		Clck = 0x22;
+		break;
+	case 3:
+		Clck = 0x21;
 		break;
 	}
+	reg_w_val(dev, 0x8500, mode);	/* mode */
+	reg_w_val(dev, 0x8700, Clck);	/* 0x27 clock */
+	reg_w_val(dev, 0x8112, 0x10 | 0x20);
+	setautogain(gspca_dev);
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
@@ -787,6 +727,7 @@ static void sd_close(struct gspca_dev *gspca_dev)
 	reg_w_val(gspca_dev->dev, 0x8114, 0);
 }
 
+/* rev72a only */
 static void do_autogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -895,24 +836,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
 }
 
+/* rev 72a only */
 static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	__u8 value;
 
-	switch (sd->chip_revision) {
-	case Rev072A:
-		value = sd->brightness;
-		reg_w_val(gspca_dev->dev, value, 0x8611);
-		reg_w_val(gspca_dev->dev, value, 0x8612);
-		reg_w_val(gspca_dev->dev, value, 0x8613);
-		reg_w_val(gspca_dev->dev, value, 0x8614);
-		break;
-	default:
-/*	case Rev012A: */
-		setcontrast(gspca_dev);
-		break;
-	}
+	value = sd->brightness;
+	reg_w_val(gspca_dev->dev, 0x8611, value);
+	reg_w_val(gspca_dev->dev, 0x8612, value);
+	reg_w_val(gspca_dev->dev, 0x8613, value);
+	reg_w_val(gspca_dev->dev, 0x8614, value);
 }
 
 static void getbrightness(struct gspca_dev *gspca_dev)
@@ -920,52 +854,38 @@ static void getbrightness(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 	__u16 tot;
 
-	switch (sd->chip_revision) {
-	case Rev072A:
-		tot = 0;
-		reg_r(gspca_dev, 0x8611, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8612, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8613, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8614, 1);
-		tot += gspca_dev->usb_buf[0];
-		sd->brightness = tot >> 2;
-		break;
-	default:
-/*	case Rev012A: */
-		/* no way to read sensor settings */
-		break;
-	}
+	tot = 0;
+	reg_r(gspca_dev, 0x8611, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8612, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8613, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8614, 1);
+	tot += gspca_dev->usb_buf[0];
+	sd->brightness = tot >> 2;
 }
 
+/* rev72a only */
 static void getcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	__u16 tot;
 
-	switch (sd->chip_revision) {
-	case Rev072A:
-		tot = 0;
-		reg_r(gspca_dev, 0x8651, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8652, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8653, 1);
-		tot += gspca_dev->usb_buf[0];
-		reg_r(gspca_dev, 0x8654, 1);
-		tot += gspca_dev->usb_buf[0];
-		sd->contrast = tot << 6;
-		break;
-	default:
-/*	case Rev012A: */
-		/* no way to read sensor settings */
-		break;
-	}
+	tot = 0;
+	reg_r(gspca_dev, 0x8651, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8652, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8653, 1);
+	tot += gspca_dev->usb_buf[0];
+	reg_r(gspca_dev, 0x8654, 1);
+	tot += gspca_dev->usb_buf[0];
+	sd->contrast = tot << 6;
 	PDEBUG(D_CONF, "get contrast %d", sd->contrast);
 }
 
+/* rev 72a only */
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -985,6 +905,7 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+/* rev 72a only */
 static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -1022,7 +943,7 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
-/* white balance - new */
+/* rev12a only */
 static int sd_setwhite(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -1041,20 +962,173 @@ static int sd_getwhite(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+/* rev12a only */
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->exposure = val;
+	if (gspca_dev->streaming)
+		setexposure(gspca_dev);
+	return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->exposure;
+	return 0;
+}
+
+/* rev12a only */
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gain = val;
+	if (gspca_dev->streaming)
+		setgain(gspca_dev);
+	return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->gain;
+	return 0;
+}
+
+/* control tables */
+static struct ctrl sd_ctrls_12a[] = {
+	{
+	    {
+		.id = V4L2_CID_DO_WHITE_BALANCE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "While Balance",
+		.minimum = WHITE_MIN,
+		.maximum = WHITE_MAX,
+		.step = 1,
+		.default_value = WHITE_DEF,
+	    },
+	    .set = sd_setwhite,
+	    .get = sd_getwhite,
+	},
+	{
+	    {
+		.id = V4L2_CID_EXPOSURE,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Exposure",
+		.minimum = EXPOSURE_MIN,
+		.maximum = EXPOSURE_MAX,
+		.step = 1,
+		.default_value = EXPOSURE_DEF,
+	    },
+	    .set = sd_setexposure,
+	    .get = sd_getexposure,
+	},
+	{
+	    {
+		.id = V4L2_CID_AUTOGAIN,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Auto Gain",
+		.minimum = AUTOGAIN_MIN,
+		.maximum = AUTOGAIN_MAX,
+		.step = 1,
+		.default_value = AUTOGAIN_DEF,
+	    },
+	    .set = sd_setautogain,
+	    .get = sd_getautogain,
+	},
+	{
+	    {
+		.id = V4L2_CID_GAIN,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Gain",
+		.minimum = GAIN_MIN,
+		.maximum = GAIN_MAX,
+		.step = 1,
+		.default_value = GAIN_DEF,
+	    },
+	    .set = sd_setgain,
+	    .get = sd_getgain,
+	},
+};
+
+static struct ctrl sd_ctrls_72a[] = {
+	{
+	   {
+		.id = V4L2_CID_BRIGHTNESS,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Brightness",
+		.minimum = BRIGHTNESS_MIN,
+		.maximum = BRIGHTNESS_MAX,
+		.step = 1,
+		.default_value = BRIGHTNESS_DEF,
+	    },
+	    .set = sd_setbrightness,
+	    .get = sd_getbrightness,
+	},
+	{
+	    {
+		.id = V4L2_CID_CONTRAST,
+		.type = V4L2_CTRL_TYPE_INTEGER,
+		.name = "Contrast",
+		.minimum = CONTRAST_MIN,
+		.maximum = CONTRAST_MAX,
+		.step = 1,
+		.default_value = CONTRAST_DEF,
+	    },
+	    .set = sd_setcontrast,
+	    .get = sd_getcontrast,
+	},
+	{
+	    {
+		.id = V4L2_CID_AUTOGAIN,
+		.type = V4L2_CTRL_TYPE_BOOLEAN,
+		.name = "Auto Gain",
+		.minimum = AUTOGAIN_MIN,
+		.maximum = AUTOGAIN_MAX,
+		.step = 1,
+		.default_value = AUTOGAIN_DEF,
+	    },
+	    .set = sd_setautogain,
+	    .get = sd_getautogain,
+	},
+};
+
 /* sub-driver description */
-static const struct sd_desc sd_desc = {
+static const struct sd_desc sd_desc_12a = {
 	.name = MODULE_NAME,
-	.ctrls = sd_ctrls,
-	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.ctrls = sd_ctrls_12a,
+	.nctrls = ARRAY_SIZE(sd_ctrls_12a),
 	.config = sd_config,
-	.open = sd_open,
-	.start = sd_start,
+	.open = sd_open_12a,
+	.start = sd_start_12a,
+	.stopN = sd_stopN,
+	.stop0 = sd_stop0,
+	.close = sd_close,
+	.pkt_scan = sd_pkt_scan,
+/*	.dq_callback = do_autogain,	 * fixme */
+};
+static const struct sd_desc sd_desc_72a = {
+	.name = MODULE_NAME,
+	.ctrls = sd_ctrls_72a,
+	.nctrls = ARRAY_SIZE(sd_ctrls_72a),
+	.config = sd_config,
+	.open = sd_open_72a,
+	.start = sd_start_72a,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
 	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.dq_callback = do_autogain,
 };
+static const struct sd_desc *sd_desc[2] = {
+	&sd_desc_12a,
+	&sd_desc_72a
+};
 
 /* -- module initialisation -- */
 static const __devinitdata struct usb_device_id device_table[] = {
@@ -1082,7 +1156,9 @@ MODULE_DEVICE_TABLE(usb, device_table);
 static int sd_probe(struct usb_interface *intf,
 		    const struct usb_device_id *id)
 {
-	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+	return gspca_dev_probe(intf, id,
+				sd_desc[id->driver_info],
+				sizeof(struct sd),
 			       THIS_MODULE);
 }
 
-- 
GitLab


From 285a4f6c8e518f03758c7b085bda13bb3795df0a Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:33 -0300
Subject: [PATCH 695/869] V4L/DVB (8673): gspca: Bad frame scanning again and
 bad init in pac7311.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/pac7311.c | 62 +++++++++++++++++++++++------
 1 file changed, 50 insertions(+), 12 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 730b4a1aed9..85d9ddbc5b7 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -220,6 +220,7 @@ static const __u8 probe_7302[] = {
 };
 static const __u8 start_7302[] = {
 /*	index, len, [value]* */
+	0xff, 1,	0x00,		/* page 0 */
 	0x00, 12,	0x01, 0x40, 0x40, 0x40, 0x01, 0xe0, 0x02, 0x80,
 			0x00, 0x00, 0x00, 0x00,
 	0x0d, 24,	0x03, 0x01, 0x00, 0xb5, 0x07, 0xcb, 0x00, 0x00,
@@ -249,7 +250,7 @@ static const __u8 start_7302[] = {
 	0xd1, 11,	0x01, 0x30, 0x49, 0x5e, 0x6f, 0x7f, 0x8e, 0xa9,
 			0xc1, 0xd7, 0xec,
 	0xdc, 1,	0x01,
-	0xff, 1,	0x01,
+	0xff, 1,	0x01,		/* page 1 */
 	0x12, 3,	0x02, 0x00, 0x01,
 	0x3e, 2,	0x00, 0x00,
 	0x76, 5,	0x01, 0x20, 0x40, 0x00, 0xf2,
@@ -257,26 +258,26 @@ static const __u8 start_7302[] = {
 	0x7f, 10,	0x4b, 0x0f, 0x01, 0x2c, 0x02, 0x58, 0x03, 0x20,
 			0x02, 0x00,
 	0x96, 5,	0x01, 0x10, 0x04, 0x01, 0x04,
-	0xc8, 17,	0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
+	0xc8, 14,	0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00,
 			0x07, 0x00, 0x01, 0x07, 0x04, 0x01,
-			0x01,
+	0xd8, 1,	0x01,
 	0xdb, 2,	0x00, 0x01,
-	0xde, 8,	0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00,
+	0xde, 7,	0x00, 0x01, 0x04, 0x04, 0x00, 0x00, 0x00,
 	0xe6, 4,	0x00, 0x00, 0x00, 0x01,
 	0xeb, 1,	0x00,
-	0xff, 1,	0x02,
+	0xff, 1,	0x02,		/* page 2 */
 	0x22, 1,	0x00,
-	0xff, 1,	0x03,
+	0xff, 1,	0x03,		/* page 3 */
 	0x00, 255,			/* load the page 3 */
 	0x11, 1,	0x01,
-	0xff, 1,	0x02,
+	0xff, 1,	0x02,		/* page 2 */
 	0x13, 1,	0x00,
 	0x22, 4,	0x1f, 0xa4, 0xf0, 0x96,
 	0x27, 2,	0x14, 0x0c,
 	0x2a, 5,	0xc8, 0x00, 0x18, 0x12, 0x22,
 	0x64, 8,	0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44,
 	0x6e, 1,	0x08,
-	0xff, 1,	0x03,
+	0xff, 1,	0x03,		/* page 1 */
 	0x78, 1,	0x00,
 	0, 0				/* end of sequence */
 };
@@ -321,14 +322,14 @@ static const __u8 probe_7311[] = {
 
 static const __u8 start_7311[] = {
 /*	index, len, [value]* */
-	0xff, 1,	0x01,
-	0x02, 53,	0x48, 0x0a, 0x40, 0x08, 0x00, 0x00, 0x08, 0x00,
+	0xff, 1,	0x01,		/* page 1 */
+	0x02, 43,	0x48, 0x0a, 0x40, 0x08, 0x00, 0x00, 0x08, 0x00,
 			0x06, 0xff, 0x11, 0xff, 0x5a, 0x30, 0x90, 0x4c,
 			0x00, 0x07, 0x00, 0x0a, 0x10, 0x00, 0xa0, 0x10,
 			0x02, 0x00, 0x00, 0x00, 0x00, 0x0b, 0x01, 0x00,
 			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 			0x00, 0x00, 0x00,
-	0x3e, 52,	0x00, 0x00, 0x78, 0x52, 0x4a, 0x52, 0x78, 0x6e,
+	0x3e, 42,	0x00, 0x00, 0x78, 0x52, 0x4a, 0x52, 0x78, 0x6e,
 			0x48, 0x46, 0x48, 0x6e, 0x5f, 0x49, 0x42, 0x49,
 			0x5f, 0x5f, 0x49, 0x42, 0x49, 0x5f, 0x6e, 0x48,
 			0x46, 0x48, 0x6e, 0x78, 0x52, 0x4a, 0x52, 0x78,
@@ -342,7 +343,7 @@ static const __u8 start_7311[] = {
 	0xa0, 4,	0x44, 0x44, 0x44, 0x04,
 	0xf0, 13,	0x01, 0x00, 0x00, 0x00, 0x22, 0x00, 0x20, 0x00,
 			0x3f, 0x00, 0x0a, 0x01, 0x00,
-	0xff, 1,	0x04,
+	0xff, 1,	0x04,		/* page 4 */
 	0x00, 254,			/* load the page 4 */
 	0x11, 1,	0x01,
 	0, 0				/* end of sequence */
@@ -738,6 +739,24 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 #define INTER_FRAME 0x53	/* eof + inter frame + sof */
 #define LUM_OFFSET 0x1e		/* reverse offset / start of frame */
 
+/*fixme:test+*/
+/* dump the packet */
+	if (gspca_debug & 0x200) {
+		static char tmp[50];
+
+		PDEBUG(0x200, "pkt_scan");
+		tmp[0] = 0;
+		for (i = 0; i < len; i++) {
+			if (i % 16 == 0 && i != 0) {
+				PDEBUG(0x200, "%s", tmp);
+				tmp[0] = 0;
+			}
+			sprintf(&tmp[(i % 16) * 3], "%02x ", data[i]);
+		}
+		if (tmp[0] != 0)
+			PDEBUG(0x200, "%s", tmp);
+	}
+/*fixme:test-*/
 	/*
 	 * inside a frame, there may be:
 	 *	escaped ff ('ff 00')
@@ -819,6 +838,25 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			put_jpeg_head(gspca_dev, frame);
 			break;
 		case 0xff:		/* 'ff ff ff xx' */
+/*fixme:test+*/
+/* is there a start of frame ? */
+			if (data[i + 2] == 0x00) {
+				static __u8 ffd9[2] = {0xff, 0xd9};
+
+				gspca_frame_add(gspca_dev,
+						INTER_PACKET,
+						frame, data,
+							i + 7 - INTER_FRAME);
+				frame = gspca_frame_add(gspca_dev,
+							LAST_PACKET,
+							frame, ffd9, 2);
+				data += i + 7;
+				len -= i + 7;
+				i = 0;
+				put_jpeg_head(gspca_dev, frame);
+				break;
+			}
+/*fixme:test-*/
 			gspca_frame_add(gspca_dev, INTER_PACKET,
 					frame, data, i);
 			data += i + 4;
-- 
GitLab


From 6ab0b174d22b448d66058c9de0114fdfac5b7ccf Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:34 -0300
Subject: [PATCH 696/869] V4L/DVB (8674): gspca: Webcam 0c45:612e added in
 sonixj.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/sonixj.c | 110 ++++++++++++++++++++++++++---
 1 file changed, 100 insertions(+), 10 deletions(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 0a20db87a47..47737bf04c6 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -55,8 +55,9 @@ struct sd {
 #define SENSOR_MI0360 1
 #define SENSOR_MO4000 2
 #define SENSOR_OM6802 3
-#define SENSOR_OV7648 4
-#define SENSOR_OV7660 5
+#define SENSOR_OV7630 4
+#define SENSOR_OV7648 5
+#define SENSOR_OV7660 6
 	unsigned char i2c_base;
 };
 
@@ -195,6 +196,17 @@ static const __u8 sn_om6802[] = {
 	0xf7
 };
 
+static const __u8 sn_ov7630[] = {
+/*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
+	0x00,	0x21,	0x40,	0x00,	0x1a,	0x20,	0x1f,	0x20,
+/*	reg8	reg9	rega	regb	regc	regd	rege	regf */
+	0xa1,	0x21,	0x76,	0x21,	0x00,	0x00,	0x00,	0x10,
+/*	reg10	reg11	reg12	reg13	reg14	reg15	reg16	reg17 */
+	0x03,	0x00,	0x04,	0x01,	0x0a,	0x28,	0x1e,	0xc2,
+/*	reg18	reg19	reg1a	reg1b	reg1c	reg1d	reg1e	reg1f */
+	0x0b,	0x00,	0x00,	0x00,	0x00,	0x00
+};
+
 static const __u8 sn_ov7648[] = {
 /*	reg0	reg1	reg2	reg3	reg4	reg5	reg6	reg7 */
 	0x00,	0x21,	0x62,	0x00,	0x1a,	0x20,	0x20,	0x20,
@@ -223,6 +235,7 @@ static const __u8 *sn_tb[] = {
 	sn_mi0360,
 	sn_mo4000,
 	sn_om6802,
+	sn_ov7630,
 	sn_ov7648,
 	sn_ov7660
 };
@@ -390,6 +403,56 @@ static __u8 om6802_sensor_init[][8] = {
 /*	{0xa0, 0x34, 0x69, 0x01, 0x00, 0x00, 0x00, 0x10}, */
 	{}
 };
+static const __u8 ov7630_sensor_init[][8] = {
+	{0xa1, 0x21, 0x76, 0x01, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
+/* win: delay 20ms */
+	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
+/* win: delay 20ms */
+	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+/* win: loop on 2 wwrite, 1 read */
+	{0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10},
+	{0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10},
+	{0xb1, 0x21, 0x15, 0x80, 0x03, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
+	{0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x1f, 0x00, 0x80, 0x80, 0x80, 0x10},
+	{0xd1, 0x21, 0x23, 0xde, 0x10, 0x8a, 0xa0, 0x10},
+	{0xc1, 0x21, 0x27, 0xca, 0xa2, 0x74, 0x00, 0x10},
+	{0xd1, 0x21, 0x2a, 0x88, 0x00, 0x88, 0x01, 0x10},
+	{0xc1, 0x21, 0x2e, 0x80, 0x00, 0x18, 0x00, 0x10},
+	{0xa1, 0x21, 0x21, 0x08, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x22, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x2e, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xb1, 0x21, 0x32, 0xc2, 0x08, 0x00, 0x00, 0x10},
+	{0xb1, 0x21, 0x4c, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x60, 0x05, 0x40, 0x12, 0x57, 0x10},
+	{0xa1, 0x21, 0x64, 0x73, 0x00, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x65, 0x00, 0x55, 0x01, 0xac, 0x10},
+	{0xa1, 0x21, 0x69, 0x38, 0x00, 0x00, 0x00, 0x10},
+	{0xd1, 0x21, 0x6f, 0x1f, 0x01, 0x00, 0x10, 0x10},
+	{0xd1, 0x21, 0x73, 0x50, 0x20, 0x02, 0x01, 0x10},
+	{0xd1, 0x21, 0x77, 0xf3, 0x90, 0x98, 0x98, 0x10},
+	{0xc1, 0x21, 0x7b, 0x00, 0x4c, 0xf7, 0x00, 0x10},
+	{0xd1, 0x21, 0x17, 0x1b, 0xbd, 0x05, 0xf6, 0x10},
+	{0xa1, 0x21, 0x1b, 0x04, 0x00, 0x00, 0x00, 0x10},
+/* */
+	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
+/*fixme: + 0x12, 0x04*/
+	{0xa1, 0x21, 0x75, 0x82, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x10, 0x32, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10},
+	{0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10},
+	{0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10},
+	{}
+};
 static const __u8 ov7660_sensor_init[][8] = {
 	{0xa1, 0x21, 0x12, 0x80, 0x00, 0x00, 0x00, 0x10}, /* reset SCCB */
 /*		(delay 20ms) */
@@ -803,6 +866,19 @@ static void om6802_InitSensor(struct gspca_dev *gspca_dev)
 	}
 }
 
+static void ov7630_InitSensor(struct gspca_dev *gspca_dev)
+{
+	int i = 0;
+
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);
+	i++;
+	msleep(20);
+	while (ov7630_sensor_init[i][0]) {
+		i2c_w8(gspca_dev, ov7630_sensor_init[i]);
+		i++;
+	}
+}
+
 static void ov7648_InitSensor(struct gspca_dev *gspca_dev)
 {
 	int i = 0;
@@ -1060,8 +1136,8 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	static const __u8 C0[] = { 0x2d, 0x2d, 0x3a, 0x05, 0x04, 0x3f };
 	static const __u8 CA[] = { 0x28, 0xd8, 0x14, 0xec };
 	static const __u8 CE[] = { 0x32, 0xdd, 0x2d, 0xdd };	/* MI0360 */
-	static const __u8 CE_sn9c325[] =
-			{ 0x32, 0xdd, 0x32, 0xdd };	/* OV7648 - SN9C325 */
+	static const __u8 CE_ov76xx[] =
+			{ 0x32, 0xdd, 0x32, 0xdd };	/* OV7630/48 */
 
 	sn9c1xx = sn_tb[(int) sd->sensor];
 	configure_gpio(gspca_dev, sn9c1xx);
@@ -1079,10 +1155,17 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, 0xc8, 0x50);
 	reg_w1(gspca_dev, 0xc9, 0x3c);
 	reg_w1(gspca_dev, 0x18, sn9c1xx[0x18]);
-	switch (sd->bridge) {
-	case BRIDGE_SN9C325:
+	switch (sd->sensor) {
+	case SENSOR_OV7630:
+		reg17 = 0xe2;
+		break;
+	case SENSOR_OV7648:
 		reg17 = 0xae;
 		break;
+/*jfm: from win trace */
+	case SENSOR_OV7660:
+		reg17 = 0xa0;
+		break;
 	default:
 		reg17 = 0x60;
 		break;
@@ -1138,6 +1221,11 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		om6802_InitSensor(gspca_dev);
 		reg17 = 0x64;		/* 640 MCKSIZE */
 		break;
+	case SENSOR_OV7630:
+		ov7630_InitSensor(gspca_dev);
+		reg17 = 0xe2;
+		reg1 = 0x40;
+		break;
 	case SENSOR_OV7648:
 		ov7648_InitSensor(gspca_dev);
 		reg17 = 0xa2;
@@ -1162,9 +1250,10 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	}
 	reg_w(gspca_dev, 0xc0, C0, 6);
 	reg_w(gspca_dev, 0xca, CA, 4);
-	switch (sd->bridge) {
-	case BRIDGE_SN9C325:
-		reg_w(gspca_dev, 0xce, CE_sn9c325, 4);
+	switch (sd->sensor) {
+	case SENSOR_OV7630:
+	case SENSOR_OV7648:
+		reg_w(gspca_dev, 0xce, CE_ov76xx, 4);
 		break;
 	default:
 		reg_w(gspca_dev, 0xce, CE, 4);
@@ -1208,6 +1297,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		i2c_w8(gspca_dev, stopmi0360);
 		data = 0x29;
 		break;
+	case SENSOR_OV7630:
 	case SENSOR_OV7648:
 		data = 0x29;
 		break;
@@ -1503,7 +1593,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 /*bw600.inf:*/
 	{USB_DEVICE(0x0c45, 0x612a), BSI(SN9C110, OV7648, 0x21)}, /*sn9c325?*/
 	{USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)},
-/*	{USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x??)}, */
+	{USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x21)},
 /*	{USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */
 #ifndef CONFIG_USB_SN9C102
 	{USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)},
-- 
GitLab


From f75c4950bb6e677e89479192b2ecfbec0beab14e Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:35 -0300
Subject: [PATCH 697/869] V4L/DVB (8675): gspca: Pixmap PJPG (Pixart 73xx JPEG)
 added, generated by pac7311.

The JPEG frames generated by the Pixart 73xx have:
- special markers 'ff ff ff xx' every 1024/512 bytes,
- unused 8 bits at end of JPEG blocks,
and then ask for a new pixel format.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/gspca/pac7311.c | 200 ++--------------------------
 include/linux/videodev2.h           |   1 +
 2 files changed, 10 insertions(+), 191 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 85d9ddbc5b7..3c9f2b14ca8 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -22,6 +22,7 @@
 #define MODULE_NAME "pac7311"
 
 #include "gspca.h"
+#include "jpeg.h"
 
 MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li");
 MODULE_DESCRIPTION("Pixart PAC7311");
@@ -40,7 +41,6 @@ struct sd {
 	unsigned char colors;
 	unsigned char autogain;
 
-	char ffnb;	/* number of 'ff' in the previous frame */
 	char tosof;	/* number of bytes before next start of frame */
 	signed char ag_cnt;
 #define AG_CNT_START 13
@@ -121,95 +121,23 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format vga_mode[] = {
-	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+	{160, 120, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 160 * 120 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 2},
-	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+	{320, 240, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 1},
-	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+	{640, 480, V4L2_PIX_FMT_PJPG, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 3 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 0},
 };
 
-#define PAC7311_JPEG_HEADER_SIZE (sizeof pac7311_jpeg_header)	/* (594) */
-
-static const __u8 pac7311_jpeg_header[] = {
-	0xff, 0xd8,
-	0xff, 0xe0, 0x00, 0x03, 0x20,
-	0xff, 0xc0, 0x00, 0x11, 0x08,
-		0x01, 0xe0,			/* 12: height */
-		0x02, 0x80,			/* 14: width */
-		0x03,				/* 16 */
-			0x01, 0x21, 0x00,
-			0x02, 0x11, 0x01,
-			0x03, 0x11, 0x01,
-	0xff, 0xdb, 0x00, 0x84,
-	0x00, 0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e, 0x0d,
-	0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28, 0x1a, 0x18, 0x16,
-	0x16, 0x18, 0x31, 0x23, 0x25, 0x1d, 0x28, 0x3a, 0x33, 0x3d,
-	0x3c, 0x39, 0x33, 0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40,
-	0x44, 0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57, 0x5f,
-	0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71, 0x79, 0x70, 0x64,
-	0x78, 0x5c, 0x65, 0x67, 0x63, 0x01, 0x11, 0x12, 0x12, 0x18,
-	0x15, 0x18, 0x2f, 0x1a, 0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42,
-	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
-	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
-	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
-	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
-	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
-	0xff, 0xc4, 0x01, 0xa2, 0x00, 0x00, 0x01, 0x05, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
-	0x09, 0x0a, 0x0b, 0x10, 0x00, 0x02, 0x01, 0x03, 0x03, 0x02,
-	0x04, 0x03, 0x05, 0x05, 0x04, 0x04, 0x00, 0x00, 0x01, 0x7d,
-	0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, 0x21, 0x31,
-	0x41, 0x06, 0x13, 0x51, 0x61, 0x07, 0x22, 0x71, 0x14, 0x32,
-	0x81, 0x91, 0xa1, 0x08, 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52,
-	0xd1, 0xf0, 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16,
-	0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2a,
-	0x34, 0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44, 0x45,
-	0x46, 0x47, 0x48, 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57,
-	0x58, 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69,
-	0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x83,
-	0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94,
-	0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
-	0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
-	0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
-	0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8,
-	0xd9, 0xda, 0xe1, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8,
-	0xe9, 0xea, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8,
-	0xf9, 0xfa, 0x01, 0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01,
-	0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a,
-	0x0b, 0x11, 0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
-	0x07, 0x05, 0x04, 0x04, 0x00, 0x01, 0x02, 0x77, 0x00, 0x01,
-	0x02, 0x03, 0x11, 0x04, 0x05, 0x21, 0x31, 0x06, 0x12, 0x41,
-	0x51, 0x07, 0x61, 0x71, 0x13, 0x22, 0x32, 0x81, 0x08, 0x14,
-	0x42, 0x91, 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0,
-	0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, 0xe1, 0x25,
-	0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, 0x27, 0x28, 0x29, 0x2a,
-	0x35, 0x36, 0x37, 0x38, 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46,
-	0x47, 0x48, 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58,
-	0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a,
-	0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, 0x7a, 0x82, 0x83,
-	0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94,
-	0x95, 0x96, 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5,
-	0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6,
-	0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
-	0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8,
-	0xd9, 0xda, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9,
-	0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0xfa,
-	0xff, 0xda, 0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03,
-	0x11, 0x00, 0x3f, 0x00
-};
-
 /* pac 7302 */
 static const __u8 probe_7302[] = {
 /*	index,value */
@@ -566,7 +494,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	sd->ffnb = 0;
 	sd->tosof = 0;
 
 	if (sd->sensor == SENSOR_PAC7302)
@@ -699,34 +626,6 @@ static void do_autogain(struct gspca_dev *gspca_dev)
 	}
 }
 
-/* output the jpeg header */
-static void put_jpeg_head(struct gspca_dev *gspca_dev,
-			struct gspca_frame *frame)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	unsigned char tmpbuf[4];
-
-	if (sd->ag_cnt >= 0) {
-		if (--sd->ag_cnt < 0) {
-			sd->ag_cnt = AG_CNT_START;
-			atomic_set(&sd->avg_lum, sd->lum_sum / AG_CNT_START);
-			atomic_set(&sd->do_gain, 1);
-		}
-	}
-	gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-			(__u8 *) pac7311_jpeg_header,
-			12);
-	tmpbuf[0] = gspca_dev->height >> 8;
-	tmpbuf[1] = gspca_dev->height & 0xff;
-	tmpbuf[2] = gspca_dev->width >> 8;
-	tmpbuf[3] = gspca_dev->width & 0xff;
-	gspca_frame_add(gspca_dev, INTER_PACKET, frame,
-			tmpbuf, 4);
-	gspca_frame_add(gspca_dev, INTER_PACKET, frame,
-		(__u8 *) &pac7311_jpeg_header[16],
-		PAC7311_JPEG_HEADER_SIZE - 16);
-}
-
 /* this function is run at interrupt level */
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
@@ -739,24 +638,6 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 #define INTER_FRAME 0x53	/* eof + inter frame + sof */
 #define LUM_OFFSET 0x1e		/* reverse offset / start of frame */
 
-/*fixme:test+*/
-/* dump the packet */
-	if (gspca_debug & 0x200) {
-		static char tmp[50];
-
-		PDEBUG(0x200, "pkt_scan");
-		tmp[0] = 0;
-		for (i = 0; i < len; i++) {
-			if (i % 16 == 0 && i != 0) {
-				PDEBUG(0x200, "%s", tmp);
-				tmp[0] = 0;
-			}
-			sprintf(&tmp[(i % 16) * 3], "%02x ", data[i]);
-		}
-		if (tmp[0] != 0)
-			PDEBUG(0x200, "%s", tmp);
-	}
-/*fixme:test-*/
 	/*
 	 * inside a frame, there may be:
 	 *	escaped ff ('ff 00')
@@ -767,47 +648,10 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	 *	0x33 bytes
 	 *	one byte luminosity
 	 *	0x16 bytes
-	 *	ff ff 00 ff 96 62 44	start of frame header
+	 *	ff ff 00 ff 96 62 44	start of frame
 	 */
 
-	if (sd->tosof == 0) {	/* if inside a frame */
-
-		/* check for 'ff ff ff xx' at start and at end of packet */
-		/* (len is always >= 3 and xx never ff) */
-		switch (sd->ffnb) {
-		case 1:
-			if (data[0] != 0xff) {	/* can be '00' only */
-				__u8 ff;
-
-				sd->ffnb = 0;
-				ff = 0xff;
-				gspca_frame_add(gspca_dev, INTER_PACKET,
-						frame, &ff, 1);
-				break;		/* keep 'ff 00' */
-			}
-			/* fall thru */
-		case 2:
-		case 3:
-			data += 4 - sd->ffnb;
-			len -= 4 - sd->ffnb;
-			sd->ffnb = 0;
-			break;
-		}
-		if (data[len - 1] == 0xff) {
-			if (data[len - 2] == 0xff) {
-				if (data[len - 3] == 0xff) {
-					sd->ffnb = 3;
-					len -= 3;
-				} else {
-					sd->ffnb = 2;
-					len -= 2;
-				}
-			} else {
-				sd->ffnb = 1;
-				len--;
-			}
-		}
-	} else {		/* outside a frame */
+	if (sd->tosof != 0) {	/* if outside a frame */
 
 		/* get the luminosity and go to the start of frame */
 		data += sd->tosof;
@@ -815,14 +659,14 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 		if (sd->tosof > LUM_OFFSET)
 			sd->lum_sum += data[-LUM_OFFSET];
 		sd->tosof = 0;
-		put_jpeg_head(gspca_dev, frame);
+		jpeg_put_header(gspca_dev, frame, 1, 0x21);
 	}
 
 	for (i = 0; i < len; i++) {
 		if (data[i] != 0xff)
 			continue;
 		switch (data[i + 1]) {
-		case 0xd9:		/* end of frame */
+		case 0xd9:		/* 'ff d9' end of frame */
 			frame = gspca_frame_add(gspca_dev,
 						LAST_PACKET,
 						frame, data, i + 2);
@@ -835,33 +679,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 				sd->tosof = -len;
 				break;
 			}
-			put_jpeg_head(gspca_dev, frame);
-			break;
-		case 0xff:		/* 'ff ff ff xx' */
-/*fixme:test+*/
-/* is there a start of frame ? */
-			if (data[i + 2] == 0x00) {
-				static __u8 ffd9[2] = {0xff, 0xd9};
-
-				gspca_frame_add(gspca_dev,
-						INTER_PACKET,
-						frame, data,
-							i + 7 - INTER_FRAME);
-				frame = gspca_frame_add(gspca_dev,
-							LAST_PACKET,
-							frame, ffd9, 2);
-				data += i + 7;
-				len -= i + 7;
-				i = 0;
-				put_jpeg_head(gspca_dev, frame);
-				break;
-			}
-/*fixme:test-*/
-			gspca_frame_add(gspca_dev, INTER_PACKET,
-					frame, data, i);
-			data += i + 4;
-			len -= i + 4;
-			i = 0;
+			jpeg_put_header(gspca_dev, frame, 1, 0x21);
 			break;
 		}
 	}
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index e65a6bed4e3..6c73516b74c 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -334,6 +334,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_SPCA508  v4l2_fourcc('S', '5', '0', '8') /* YUVY per line */
 #define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
 #define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
+#define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
-- 
GitLab


From c7087f56a42b0aa82b181d9a08a376c4add7a683 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 3 Sep 2008 16:47:36 -0300
Subject: [PATCH 698/869] V4L/DVB (8678): Remove the dead
 CONFIG_RADIO_MIROPCM20{,_RDS} code

The CONFIG_RADIO_MIROPCM20{,_RDS} code became dead code 1.5 years ago.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/radio/Makefile             |   4 -
 drivers/media/radio/miropcm20-radio.c    | 266 -----------------------
 drivers/media/radio/miropcm20-rds-core.c | 211 ------------------
 drivers/media/radio/miropcm20-rds-core.h |  19 --
 drivers/media/radio/miropcm20-rds.c      | 136 ------------
 5 files changed, 636 deletions(-)
 delete mode 100644 drivers/media/radio/miropcm20-radio.c
 delete mode 100644 drivers/media/radio/miropcm20-rds-core.c
 delete mode 100644 drivers/media/radio/miropcm20-rds-core.h
 delete mode 100644 drivers/media/radio/miropcm20-rds.c

diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index a30159f6fa4..7ca71ab96b4 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -2,8 +2,6 @@
 # Makefile for the kernel character device drivers.
 #
 
-miropcm20-objs	:= miropcm20-rds-core.o miropcm20-radio.o
-
 obj-$(CONFIG_RADIO_AZTECH) += radio-aztech.o
 obj-$(CONFIG_RADIO_RTRACK2) += radio-rtrack2.o
 obj-$(CONFIG_RADIO_SF16FMI) += radio-sf16fmi.o
@@ -14,8 +12,6 @@ obj-$(CONFIG_RADIO_TERRATEC) += radio-terratec.o
 obj-$(CONFIG_RADIO_MAXIRADIO) += radio-maxiradio.o
 obj-$(CONFIG_RADIO_RTRACK) += radio-aimslab.o
 obj-$(CONFIG_RADIO_ZOLTRIX) += radio-zoltrix.o
-obj-$(CONFIG_RADIO_MIROPCM20) += miropcm20.o
-obj-$(CONFIG_RADIO_MIROPCM20_RDS) += miropcm20-rds.o
 obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
 obj-$(CONFIG_RADIO_GEMTEK_PCI) += radio-gemtek-pci.o
 obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
diff --git a/drivers/media/radio/miropcm20-radio.c b/drivers/media/radio/miropcm20-radio.c
deleted file mode 100644
index 7fd7ee2d32c..00000000000
--- a/drivers/media/radio/miropcm20-radio.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/* Miro PCM20 radio driver for Linux radio support
- * (c) 1998 Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
- * Thanks to Norberto Pellici for the ACI device interface specification
- * The API part is based on the radiotrack driver by M. Kirkwood
- * This driver relies on the aci mixer (drivers/sound/aci.c)
- * Look there for further info...
- */
-
-/* Revision history:
- *
- *   1998        Ruurd Reitsma <R.A.Reitsma@wbmt.tudelft.nl>
- *   2000-09-05  Robert Siemer <Robert.Siemer@gmx.de>
- *        removed unfinished volume control (maybe adding it later again)
- *        use OSS-mixer; added stereo control
- */
-
-/* What ever you think about the ACI, version 0x07 is not very well!
- * I can't get frequency, 'tuner status', 'tuner flags' or mute/mono
- * conditions...                Robert
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/videodev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include "oss/aci.h"
-#include "miropcm20-rds-core.h"
-
-static int radio_nr = -1;
-module_param(radio_nr, int, 0);
-
-struct pcm20_device {
-	unsigned long freq;
-	int muted;
-	int stereo;
-};
-
-
-static int pcm20_mute(struct pcm20_device *dev, unsigned char mute)
-{
-	dev->muted = mute;
-	return aci_write_cmd(ACI_SET_TUNERMUTE, mute);
-}
-
-static int pcm20_stereo(struct pcm20_device *dev, unsigned char stereo)
-{
-	dev->stereo = stereo;
-	return aci_write_cmd(ACI_SET_TUNERMONO, !stereo);
-}
-
-static int pcm20_setfreq(struct pcm20_device *dev, unsigned long freq)
-{
-	unsigned char freql;
-	unsigned char freqh;
-
-	dev->freq=freq;
-
-	freq /= 160;
-	if (!(aci_version==0x07 || aci_version>=0xb0))
-		freq /= 10;  /* I don't know exactly which version
-			      * needs this hack */
-	freql = freq & 0xff;
-	freqh = freq >> 8;
-
-	aci_rds_cmd(RDS_RESET, NULL, 0);
-	pcm20_stereo(dev, 1);
-
-	return aci_rw_cmd(ACI_WRITE_TUNE, freql, freqh);
-}
-
-static int pcm20_getflags(struct pcm20_device *dev, __u32 *flags, __u16 *signal)
-{
-	/* okay, check for signal, stereo and rds here... */
-	int i;
-	unsigned char buf;
-
-	if ((i=aci_rw_cmd(ACI_READ_TUNERSTATION, -1, -1))<0)
-		return i;
-	pr_debug("check_sig: 0x%x\n", i);
-	if (i & 0x80) {
-		/* no signal from tuner */
-		*flags=0;
-		*signal=0;
-		return 0;
-	} else
-		*signal=0xffff;
-
-	if ((i=aci_rw_cmd(ACI_READ_TUNERSTEREO, -1, -1))<0)
-		return i;
-	if (i & 0x40) {
-		*flags=0;
-	} else {
-		/* stereo */
-		*flags=VIDEO_TUNER_STEREO_ON;
-		/* I can't see stereo, when forced to mono */
-		dev->stereo=1;
-	}
-
-	if ((i=aci_rds_cmd(RDS_STATUS, &buf, 1))<0)
-		return i;
-	if (buf & 1)
-		/* RDS available */
-		*flags|=VIDEO_TUNER_RDS_ON;
-	else
-		return 0;
-
-	if ((i=aci_rds_cmd(RDS_RXVALUE, &buf, 1))<0)
-		return i;
-	pr_debug("rds-signal: %d\n", buf);
-	if (buf > 15) {
-		printk("miropcm20-radio: RX strengths unexpected high...\n");
-		buf=15;
-	}
-	/* refine signal */
-	if ((*signal=SCALE(15, 0xffff, buf))==0)
-		*signal = 1;
-
-	return 0;
-}
-
-static int pcm20_do_ioctl(struct inode *inode, struct file *file,
-			  unsigned int cmd, void *arg)
-{
-	struct video_device *dev = video_devdata(file);
-	struct pcm20_device *pcm20 = dev->priv;
-	int i;
-
-	switch(cmd)
-	{
-		case VIDIOCGCAP:
-		{
-			struct video_capability *v = arg;
-			memset(v,0,sizeof(*v));
-			v->type=VID_TYPE_TUNER;
-			strcpy(v->name, "Miro PCM20");
-			v->channels=1;
-			v->audios=1;
-			return 0;
-		}
-		case VIDIOCGTUNER:
-		{
-			struct video_tuner *v = arg;
-			if(v->tuner)	/* Only 1 tuner */
-				return -EINVAL;
-			v->rangelow=87*16000;
-			v->rangehigh=108*16000;
-			pcm20_getflags(pcm20, &v->flags, &v->signal);
-			v->flags|=VIDEO_TUNER_LOW;
-			v->mode=VIDEO_MODE_AUTO;
-			strcpy(v->name, "FM");
-			return 0;
-		}
-		case VIDIOCSTUNER:
-		{
-			struct video_tuner *v = arg;
-			if(v->tuner!=0)
-				return -EINVAL;
-			/* Only 1 tuner so no setting needed ! */
-			return 0;
-		}
-		case VIDIOCGFREQ:
-		{
-			unsigned long *freq = arg;
-			*freq = pcm20->freq;
-			return 0;
-		}
-		case VIDIOCSFREQ:
-		{
-			unsigned long *freq = arg;
-			pcm20->freq = *freq;
-			i=pcm20_setfreq(pcm20, pcm20->freq);
-			pr_debug("First view (setfreq): 0x%x\n", i);
-			return i;
-		}
-		case VIDIOCGAUDIO:
-		{
-			struct video_audio *v = arg;
-			memset(v,0, sizeof(*v));
-			v->flags=VIDEO_AUDIO_MUTABLE;
-			if (pcm20->muted)
-				v->flags|=VIDEO_AUDIO_MUTE;
-			v->mode=VIDEO_SOUND_STEREO;
-			if (pcm20->stereo)
-				v->mode|=VIDEO_SOUND_MONO;
-			/* v->step=2048; */
-			strcpy(v->name, "Radio");
-			return 0;
-		}
-		case VIDIOCSAUDIO:
-		{
-			struct video_audio *v = arg;
-			if(v->audio)
-				return -EINVAL;
-
-			pcm20_mute(pcm20, !!(v->flags&VIDEO_AUDIO_MUTE));
-			if(v->flags&VIDEO_SOUND_MONO)
-				pcm20_stereo(pcm20, 0);
-			if(v->flags&VIDEO_SOUND_STEREO)
-				pcm20_stereo(pcm20, 1);
-
-			return 0;
-		}
-		default:
-			return -ENOIOCTLCMD;
-	}
-}
-
-static int pcm20_ioctl(struct inode *inode, struct file *file,
-		       unsigned int cmd, unsigned long arg)
-{
-	return video_usercopy(inode, file, cmd, arg, pcm20_do_ioctl);
-}
-
-static struct pcm20_device pcm20_unit = {
-	.freq   = 87*16000,
-	.muted  = 1,
-};
-
-static const struct file_operations pcm20_fops = {
-	.owner		= THIS_MODULE,
-	.open           = video_exclusive_open,
-	.release        = video_exclusive_release,
-	.ioctl		= pcm20_ioctl,
-#ifdef CONFIG_COMPAT
-	.compat_ioctl	= v4l_compat_ioctl32,
-#endif
-	.llseek         = no_llseek,
-};
-
-static struct video_device pcm20_radio = {
-	.name		= "Miro PCM 20 radio",
-	.fops           = &pcm20_fops,
-	.priv		= &pcm20_unit
-};
-
-static int __init pcm20_init(void)
-{
-	if(video_register_device(&pcm20_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-		goto video_register_device;
-
-	if(attach_aci_rds()<0)
-		goto attach_aci_rds;
-
-	printk(KERN_INFO "Miro PCM20 radio card driver.\n");
-
-	return 0;
-
- attach_aci_rds:
-	video_unregister_device(&pcm20_radio);
- video_register_device:
-	return -EINVAL;
-}
-
-MODULE_AUTHOR("Ruurd Reitsma");
-MODULE_DESCRIPTION("A driver for the Miro PCM20 radio card.");
-MODULE_LICENSE("GPL");
-
-static void __exit pcm20_cleanup(void)
-{
-	unload_aci_rds();
-	video_unregister_device(&pcm20_radio);
-}
-
-module_init(pcm20_init);
-module_exit(pcm20_cleanup);
diff --git a/drivers/media/radio/miropcm20-rds-core.c b/drivers/media/radio/miropcm20-rds-core.c
deleted file mode 100644
index 9428d8b2642..00000000000
--- a/drivers/media/radio/miropcm20-rds-core.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- *  Many thanks to Fred Seidel <seidel@metabox.de>, the
- *  designer of the RDS decoder hardware. With his help
- *  I was able to code this driver.
- *  Thanks also to Norberto Pellicci, Dominic Mounteney
- *  <DMounteney@pinnaclesys.com> and www.teleauskunft.de
- *  for good hints on finding Fred. It was somewhat hard
- *  to locate him here in Germany... [:
- *
- * Revision history:
- *
- *   2000-08-09  Robert Siemer <Robert.Siemer@gmx.de>
- *        RDS support for MiroSound PCM20 radio
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/mutex.h>
-
-#include <asm/io.h>
-#include "oss/aci.h"
-#include "miropcm20-rds-core.h"
-
-#define DEBUG 0
-
-static struct mutex aci_rds_mutex;
-
-#define RDS_DATASHIFT          2   /* Bit 2 */
-#define RDS_DATAMASK        (1 << RDS_DATASHIFT)
-#define RDS_BUSYMASK        0x10   /* Bit 4 */
-#define RDS_CLOCKMASK       0x08   /* Bit 3 */
-
-#define RDS_DATA(x)         (((x) >> RDS_DATASHIFT) & 1)
-
-
-#if DEBUG
-static void print_matrix(char array[], unsigned int length)
-{
-	int i, j;
-
-	for (i=0; i<length; i++) {
-		printk(KERN_DEBUG "aci-rds: ");
-		for (j=7; j>=0; j--) {
-			printk("%d", (array[i] >> j) & 0x1);
-		}
-		if (i%8 == 0)
-			printk(" byte-border\n");
-		else
-			printk("\n");
-	}
-}
-#endif /* DEBUG */
-
-static int byte2trans(unsigned char byte, unsigned char sendbuffer[], int size)
-{
-	int i;
-
-	if (size != 8)
-		return -1;
-	for (i = 7; i >= 0; i--)
-		sendbuffer[7-i] = (byte & (1 << i)) ? RDS_DATAMASK : 0;
-	sendbuffer[0] |= RDS_CLOCKMASK;
-
-	return 0;
-}
-
-static int rds_waitread(void)
-{
-	unsigned char byte;
-	int i=2000;
-
-	do {
-		byte=inb(RDS_REGISTER);
-		i--;
-	}
-	while ((byte & RDS_BUSYMASK) && i);
-
-	if (i) {
-		#if DEBUG
-		printk(KERN_DEBUG "rds_waitread()");
-		print_matrix(&byte, 1);
-		#endif
-		return (byte);
-	} else {
-		printk(KERN_WARNING "aci-rds: rds_waitread() timeout...\n");
-		return -1;
-	}
-}
-
-/* don't use any ..._nowait() function if you are not sure what you do... */
-
-static inline void rds_rawwrite_nowait(unsigned char byte)
-{
-	#if DEBUG
-	printk(KERN_DEBUG "rds_rawwrite()");
-	print_matrix(&byte, 1);
-	#endif
-	outb(byte, RDS_REGISTER);
-}
-
-static int rds_rawwrite(unsigned char byte)
-{
-	if (rds_waitread() >= 0) {
-		rds_rawwrite_nowait(byte);
-		return 0;
-	} else
-		return -1;
-}
-
-static int rds_write(unsigned char cmd)
-{
-	unsigned char sendbuffer[8];
-	int i;
-
-	if (byte2trans(cmd, sendbuffer, 8) != 0){
-		return -1;
-	} else {
-		for (i=0; i<8; i++) {
-			rds_rawwrite(sendbuffer[i]);
-		}
-	}
-	return 0;
-}
-
-static int rds_readcycle_nowait(void)
-{
-	rds_rawwrite_nowait(0);
-	return rds_waitread();
-}
-
-static int rds_readcycle(void)
-{
-	if (rds_rawwrite(0) < 0)
-		return -1;
-	return rds_waitread();
-}
-
-static int rds_read(unsigned char databuffer[], int datasize)
-{
-	#define READSIZE (8*datasize)
-
-	int i,j;
-
-	if (datasize < 1)  /* nothing to read */
-		return 0;
-
-	/* to be able to use rds_readcycle_nowait()
-	   I have to waitread() here */
-	if (rds_waitread() < 0)
-		return -1;
-
-	memset(databuffer, 0, datasize);
-
-	for (i=0; i< READSIZE; i++)
-		if((j=rds_readcycle_nowait()) < 0) {
-			return -1;
-		} else {
-			databuffer[i/8]|=(RDS_DATA(j) << (7-(i%8)));
-		}
-
-	return 0;
-}
-
-static int rds_ack(void)
-{
-	int i=rds_readcycle();
-
-	if (i < 0)
-		return -1;
-	if (i & RDS_DATAMASK) {
-		return 0;  /* ACK  */
-	} else {
-		printk(KERN_DEBUG "aci-rds: NACK\n");
-		return 1;  /* NACK */
-	}
-}
-
-int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize)
-{
-	int ret;
-
-	if (mutex_lock_interruptible(&aci_rds_mutex))
-		return -EINTR;
-
-	rds_write(cmd);
-
-	/* RDS_RESET doesn't need further processing */
-	if (cmd!=RDS_RESET && (rds_ack() || rds_read(databuffer, datasize)))
-		ret = -1;
-	else
-		ret = 0;
-
-	mutex_unlock(&aci_rds_mutex);
-
-	return ret;
-}
-EXPORT_SYMBOL(aci_rds_cmd);
-
-int __init attach_aci_rds(void)
-{
-	mutex_init(&aci_rds_mutex);
-	return 0;
-}
-
-void __exit unload_aci_rds(void)
-{
-}
-MODULE_LICENSE("GPL");
diff --git a/drivers/media/radio/miropcm20-rds-core.h b/drivers/media/radio/miropcm20-rds-core.h
deleted file mode 100644
index aeb5761f046..00000000000
--- a/drivers/media/radio/miropcm20-rds-core.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _MIROPCM20_RDS_CORE_H_
-#define _MIROPCM20_RDS_CORE_H_
-
-extern int aci_rds_cmd(unsigned char cmd, unsigned char databuffer[], int datasize);
-
-#define RDS_STATUS      0x01
-#define RDS_STATIONNAME 0x02
-#define RDS_TEXT        0x03
-#define RDS_ALTFREQ     0x04
-#define RDS_TIMEDATE    0x05
-#define RDS_PI_CODE     0x06
-#define RDS_PTYTATP     0x07
-#define RDS_RESET       0x08
-#define RDS_RXVALUE     0x09
-
-extern void __exit unload_aci_rds(void);
-extern int __init attach_aci_rds(void);
-
-#endif /* _MIROPCM20_RDS_CORE_H_ */
diff --git a/drivers/media/radio/miropcm20-rds.c b/drivers/media/radio/miropcm20-rds.c
deleted file mode 100644
index 3e840f74d45..00000000000
--- a/drivers/media/radio/miropcm20-rds.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* MiroSOUND PCM20 radio rds interface driver
- * (c) 2001 Robert Siemer <Robert.Siemer@gmx.de>
- * Thanks to Fred Seidel. See miropcm20-rds-core.c for further information.
- */
-
-/* Revision history:
- *
- *   2001-04-18  Robert Siemer <Robert.Siemer@gmx.de>
- *        separate file for user interface driver
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/smp_lock.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/delay.h>
-#include <asm/uaccess.h>
-#include "miropcm20-rds-core.h"
-
-static char * text_buffer;
-static int rds_users;
-
-
-static int rds_f_open(struct inode *in, struct file *fi)
-{
-	if (rds_users)
-		return -EBUSY;
-
-	lock_kernel();
-	rds_users++;
-	if ((text_buffer=kmalloc(66, GFP_KERNEL)) == 0) {
-		rds_users--;
-		printk(KERN_NOTICE "aci-rds: Out of memory by open()...\n");
-		unlock_kernel();
-		return -ENOMEM;
-	}
-
-	unlock_kernel();
-	return 0;
-}
-
-static int rds_f_release(struct inode *in, struct file *fi)
-{
-	kfree(text_buffer);
-
-	rds_users--;
-	return 0;
-}
-
-static void print_matrix(char *ch, char out[])
-{
-	int j;
-
-	for (j=7; j>=0; j--) {
-		 out[7-j] = ((*ch >> j) & 0x1) + '0';
-	}
-}
-
-static ssize_t rds_f_read(struct file *file, char __user *buffer, size_t length, loff_t *offset)
-{
-//	i = sprintf(text_buffer, "length: %d, offset: %d\n", length, *offset);
-
-	char c;
-	char bits[8];
-
-	msleep(2000);
-	aci_rds_cmd(RDS_STATUS, &c, 1);
-	print_matrix(&c, bits);
-	if (copy_to_user(buffer, bits, 8))
-		return -EFAULT;
-
-/*	if ((c >> 3) & 1) {
-		aci_rds_cmd(RDS_STATIONNAME, text_buffer+1, 8);
-		text_buffer[0]  = ' ' ;
-		text_buffer[9]  = '\n';
-		return copy_to_user(buffer+8, text_buffer, 10) ? -EFAULT: 18;
-	}
-*/
-/*	if ((c >> 6) & 1) {
-		aci_rds_cmd(RDS_PTYTATP, &c, 1);
-		if ( c & 1)
-			sprintf(text_buffer, " M");
-		else
-			sprintf(text_buffer, " S");
-		if ((c >> 1) & 1)
-			sprintf(text_buffer+2, " TA");
-		else
-			sprintf(text_buffer+2, " --");
-		if ((c >> 7) & 1)
-			sprintf(text_buffer+5, " TP");
-		else
-			sprintf(text_buffer+5, " --");
-		sprintf(text_buffer+8, " %2d\n", (c >> 2) & 0x1f);
-		return copy_to_user(buffer+8, text_buffer, 12) ? -EFAULT: 20;
-	}
-*/
-
-	if ((c >> 4) & 1) {
-		aci_rds_cmd(RDS_TEXT, text_buffer, 65);
-		text_buffer[0]  = ' ' ;
-		text_buffer[65] = '\n';
-		return copy_to_user(buffer+8, text_buffer,66) ? -EFAULT : 66+8;
-	} else {
-		put_user('\n', buffer+8);
-		return 9;
-	}
-}
-
-static const struct file_operations rds_fops = {
-	.owner		= THIS_MODULE,
-	.read		= rds_f_read,
-	.open		= rds_f_open,
-	.release	= rds_f_release
-};
-
-static struct miscdevice rds_miscdev = {
-	.minor		= MISC_DYNAMIC_MINOR,
-	.name		= "radiotext",
-	.fops		= &rds_fops,
-};
-
-static int __init miropcm20_rds_init(void)
-{
-	return misc_register(&rds_miscdev);
-}
-
-static void __exit miropcm20_rds_cleanup(void)
-{
-	misc_deregister(&rds_miscdev);
-}
-
-module_init(miropcm20_rds_init);
-module_exit(miropcm20_rds_cleanup);
-MODULE_LICENSE("GPL");
-- 
GitLab


From b045979d61b235cd9cc8347760fcfb44fc8ecbd6 Mon Sep 17 00:00:00 2001
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Wed, 3 Sep 2008 16:47:38 -0300
Subject: [PATCH 699/869] V4L/DVB (8681): v4l2-ioctl.c: fix warning

drivers/media/video/v4l2-ioctl.c:496: warning: format '%08ld' expects
type 'long int', but argument 5 has type 'suseconds_t'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/v4l2-ioctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 88c0465aede..140ef92c19c 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -499,7 +499,7 @@ static void dbgbuf(unsigned int cmd, struct video_device *vfd,
 			p->timestamp.tv_sec / 3600,
 			(int)(p->timestamp.tv_sec / 60) % 60,
 			(int)(p->timestamp.tv_sec % 60),
-			p->timestamp.tv_usec,
+			(long)p->timestamp.tv_usec,
 			p->index,
 			prt_names(p->type, v4l2_type_names),
 			p->bytesused, p->flags,
-- 
GitLab


From 46f2c21cfdb1a829a9a23e23562ffa66b007dc48 Mon Sep 17 00:00:00 2001
From: Henrik Kretzschmar <henne@nachtwindheim.de>
Date: Wed, 3 Sep 2008 16:47:39 -0300
Subject: [PATCH 700/869] V4L/DVB (8682): V4L: fix return value of register
 video func

If a wrong device type is used with video_register_device_index() it should
better return an error number, instead of a constant.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/v4l2-dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 6f36006aecd..0320fb84119 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -281,7 +281,7 @@ int video_register_device_index(struct video_device *vfd, int type, int nr,
 	default:
 		printk(KERN_ERR "%s called with unknown type: %d\n",
 		       __func__, type);
-		return -1;
+		return -EINVAL;
 	}
 
 	/* pick a minor number */
-- 
GitLab


From 0058717a1ef0c87deeccbe0a3b17def173fee9a9 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@radix.net>
Date: Wed, 3 Sep 2008 16:47:50 -0300
Subject: [PATCH 701/869] V4L/DVB (8701): cx18: Add missing lock for when the
 irq handler manipulates the queues

cx18: Add missing lock for when the irq handler manipulates the queues.  This
was a potential source of stream queue corruption.  Also changed the name of
cx18_queue_find_buf() to cx18_queue_get_buf_irq().

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-irq.c   |  2 +-
 drivers/media/video/cx18/cx18-queue.c | 23 +++++++++++++----------
 drivers/media/video/cx18/cx18-queue.h |  2 +-
 3 files changed, 15 insertions(+), 12 deletions(-)

diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index 25114a5cbd5..ab218315c84 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -61,7 +61,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb)
 		CX18_WARN("Ack struct = %d for %s\n",
 			mb->args[2], s->name);
 	id = read_enc(off);
-	buf = cx18_queue_find_buf(s, id, read_enc(off + 4));
+	buf = cx18_queue_get_buf_irq(s, id, read_enc(off + 4));
 	CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
 	if (buf) {
 		cx18_buf_sync_for_cpu(s, buf);
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index 6990b77c620..8a4dd821fd9 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -78,12 +78,13 @@ struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q)
 	return buf;
 }
 
-struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
 	u32 bytesused)
 {
 	struct cx18 *cx = s->cx;
 	struct list_head *p;
 
+	spin_lock(&s->qlock);
 	list_for_each(p, &s->q_free.list) {
 		struct cx18_buffer *buf =
 			list_entry(p, struct cx18_buffer, list);
@@ -92,17 +93,19 @@ struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
 			continue;
 		buf->bytesused = bytesused;
 		/* the transport buffers are handled differently,
-		   so there is no need to move them to the full queue */
-		if (s->type == CX18_ENC_STREAM_TYPE_TS)
-			return buf;
-		s->q_free.buffers--;
-		s->q_free.length -= s->buf_size;
-		s->q_full.buffers++;
-		s->q_full.length += s->buf_size;
-		s->q_full.bytesused += buf->bytesused;
-		list_move_tail(&buf->list, &s->q_full.list);
+		   they are not moved to the full queue */
+		if (s->type != CX18_ENC_STREAM_TYPE_TS) {
+			s->q_free.buffers--;
+			s->q_free.length -= s->buf_size;
+			s->q_full.buffers++;
+			s->q_full.length += s->buf_size;
+			s->q_full.bytesused += buf->bytesused;
+			list_move_tail(&buf->list, &s->q_full.list);
+		}
+		spin_unlock(&s->qlock);
 		return buf;
 	}
+	spin_unlock(&s->qlock);
 	CX18_ERR("Cannot find buffer %d for stream %s\n", id, s->name);
 	return NULL;
 }
diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h
index 91423b9863a..7f93bb13c09 100644
--- a/drivers/media/video/cx18/cx18-queue.h
+++ b/drivers/media/video/cx18/cx18-queue.h
@@ -46,7 +46,7 @@ void cx18_queue_init(struct cx18_queue *q);
 void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
 	struct cx18_queue *q);
 struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q);
-struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
+struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
 	u32 bytesused);
 void cx18_flush_queues(struct cx18_stream *s);
 
-- 
GitLab


From d698dc6b0477d3165a7f320b3ce36d1cbd361c94 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:51 -0300
Subject: [PATCH 702/869] V4L/DVB (8703): gspca: Do controls work for spca561
 revision 12a.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/spca561.c | 73 ++++++++++++++++++-----------
 1 file changed, 46 insertions(+), 27 deletions(-)

diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 0a2b8bc5b85..0a1e66201a6 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -38,9 +38,9 @@ struct sd {
 #define CONTRAST_MAX 0x3fff
 
 	__u16 exposure;			/* rev12a only */
-#define EXPOSURE_MIN 0x0120
+#define EXPOSURE_MIN 0x2001
 #define EXPOSURE_DEF 0x20ae
-#define EXPOSURE_MAX 0x5720
+#define EXPOSURE_MAX 0x421d
 
 	__u8 brightness;		/* rev72a only */
 #define BRIGHTNESS_MIN 0
@@ -62,6 +62,9 @@ struct sd {
 #define GAIN_DEF 0x24
 #define GAIN_MAX 0x24
 
+#define EXPO12A_DEF 3
+	__u8 expo12a;		/* expo/gain? for rev 12a */
+
 	__u8 chip_revision;
 #define Rev012A 0
 #define Rev072A 1
@@ -553,6 +556,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->exposure = EXPOSURE_DEF;
 	sd->autogain = AUTOGAIN_DEF;
 	sd->gain = GAIN_DEF;
+	sd->expo12a = EXPO12A_DEF;
 	return 0;
 }
 
@@ -609,12 +613,9 @@ static void setwhite(struct gspca_dev *gspca_dev)
 		return;
 	}
 	/* try to emulate MS-win as possible */
-	if (white < 0x45)
-		reg8616 = white;
-	else
-		reg8616 = 0x93 + (white >> 2);
-	reg8614 = 0x28 + (white >> 4);
+	reg8616 = 0x90 - white * 5 / 8;
 	reg_w_val(gspca_dev->dev, 0x8616, reg8616);
+	reg8614 = 0x20 + white * 3 / 8;
 	reg_w_val(gspca_dev->dev, 0x8614, reg8614);
 }
 
@@ -622,30 +623,32 @@ static void setwhite(struct gspca_dev *gspca_dev)
 static void setexposure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
+	__u8 data[2];
 
-	reg_w_val(dev, 0x8309, sd->gain);
+	data[0] = sd->exposure;
+	data[1] = sd->exposure >> 8;
+	reg_w_buf(gspca_dev, 0x8309, data, 2);
 }
 
 /* rev 12a only */
 static void setgain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
+	__u8 data[2];
 
-	reg_w_val(dev, 0x8335, sd->gain);
+	data[0] = sd->gain;
+	data[1] = 0;
+	reg_w_buf(gspca_dev, 0x8335, data, 2);
 }
 
 static void setautogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (sd->chip_revision == Rev072A) {
-		if (sd->autogain)
-			sd->ag_cnt = AG_CNT_START;
-		else
-			sd->ag_cnt = -1;
-	}
+	if (sd->autogain)
+		sd->ag_cnt = AG_CNT_START;
+	else
+		sd->ag_cnt = -1;
 }
 
 static void sd_start_12a(struct gspca_dev *gspca_dev)
@@ -684,6 +687,7 @@ static void sd_start_12a(struct gspca_dev *gspca_dev)
 	reg_w_val(gspca_dev->dev, 0x850b, 0x03);
 	setcontrast(gspca_dev);
 	setwhite(gspca_dev);
+	setautogain(gspca_dev);
 }
 static void sd_start_72a(struct gspca_dev *gspca_dev)
 {
@@ -713,12 +717,24 @@ static void sd_start_72a(struct gspca_dev *gspca_dev)
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
-	reg_w_val(gspca_dev->dev, 0x8112, 0x20);
-	reg_w_val(gspca_dev->dev, 0x8102, 0x00); /* white balance - new */
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->chip_revision == Rev012A) {
+		reg_w_val(gspca_dev->dev, 0x8112, 0x0e);
+	} else {
+		reg_w_val(gspca_dev->dev, 0x8112, 0x20);
+/*		reg_w_val(gspca_dev->dev, 0x8102, 0x00); ?? */
+	}
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->chip_revision == Rev012A) {
+		reg_w_val(gspca_dev->dev, 0x8118, 0x29);
+		reg_w_val(gspca_dev->dev, 0x8114, 0x08);
+	}
 }
 
 /* this function is called at close time */
@@ -727,7 +743,6 @@ static void sd_close(struct gspca_dev *gspca_dev)
 	reg_w_val(gspca_dev->dev, 0x8114, 0);
 }
 
-/* rev72a only */
 static void do_autogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -739,6 +754,7 @@ static void do_autogain(struct gspca_dev *gspca_dev)
 	__u8 luma_mean = 110;
 	__u8 luma_delta = 20;
 	__u8 spring = 4;
+	__u8 reg8339[2];
 
 	if (sd->ag_cnt < 0)
 		return;
@@ -793,13 +809,16 @@ static void do_autogain(struct gspca_dev *gspca_dev)
 		}
 		break;
 	case Rev012A:
-		/* sensor registers is access and memory mapped to 0x8300 */
-		/* readind all 0x83xx block the sensor */
-		/*
-		 * The data from the header seem wrong where is the luma
-		 * and chroma mean value
-		 * at the moment set exposure in contrast set
-		 */
+		reg_r(gspca_dev, 0x8330, 2);
+		if (gspca_dev->usb_buf[1] > 0x08) {
+			reg8339[0] = ++sd->expo12a;
+			reg8339[1] = 0;
+			reg_w_buf(gspca_dev, 0x8339, reg8339, 2);
+		} else if (gspca_dev->usb_buf[1] < 0x02) {
+			reg8339[0] = --sd->expo12a;
+			reg8339[1] = 0;
+			reg_w_buf(gspca_dev, 0x8339, reg8339, 2);
+		}
 		break;
 	}
 }
-- 
GitLab


From 3a1ea7050345734acc3a33b2b00a611b9b7bf640 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:55 -0300
Subject: [PATCH 703/869] V4L/DVB (8705): gspca: Adjust some control limits in
 spca561.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/spca561.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 0a1e66201a6..ec575f5672d 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -38,9 +38,9 @@ struct sd {
 #define CONTRAST_MAX 0x3fff
 
 	__u16 exposure;			/* rev12a only */
-#define EXPOSURE_MIN 0x2001
-#define EXPOSURE_DEF 0x20ae
-#define EXPOSURE_MAX 0x421d
+#define EXPOSURE_MIN 0
+#define EXPOSURE_DEF 200
+#define EXPOSURE_MAX 762
 
 	__u8 brightness;		/* rev72a only */
 #define BRIGHTNESS_MIN 0
@@ -48,7 +48,7 @@ struct sd {
 #define BRIGHTNESS_MAX 63
 
 	__u8 white;			/* rev12a only */
-#define WHITE_MIN 0
+#define WHITE_MIN 1
 #define WHITE_DEF 0x40
 #define WHITE_MAX 0x7f
 
@@ -608,10 +608,6 @@ static void setwhite(struct gspca_dev *gspca_dev)
 	__u8 reg8614, reg8616;
 
 	white = sd->white;
-	if (sd->white == 0) {
-		PDEBUG(D_CONF, "Discarding null whiteness");
-		return;
-	}
 	/* try to emulate MS-win as possible */
 	reg8616 = 0x90 - white * 5 / 8;
 	reg_w_val(gspca_dev->dev, 0x8616, reg8616);
@@ -623,10 +619,12 @@ static void setwhite(struct gspca_dev *gspca_dev)
 static void setexposure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	int expo;
 	__u8 data[2];
 
-	data[0] = sd->exposure;
-	data[1] = sd->exposure >> 8;
+	expo = sd->exposure + 0x20a8;	/* from test */
+	data[0] = expo;
+	data[1] = expo >> 8;
 	reg_w_buf(gspca_dev, 0x8309, data, 2);
 }
 
-- 
GitLab


From dff6d321d421c4c059aea72be70df3a8a200b8a3 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:57 -0300
Subject: [PATCH 704/869] V4L/DVB (8706): Make contrast and brightness work for
 pac7302.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/pac7311.c | 43 +++++++++++++++++++++++++----
 1 file changed, 37 insertions(+), 6 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 3c9f2b14ca8..3abc018f969 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -82,9 +82,10 @@ static struct ctrl sd_ctrls[] = {
 		.type    = V4L2_CTRL_TYPE_INTEGER,
 		.name    = "Contrast",
 		.minimum = 0,
-		.maximum = 255,
+#define CONTRAST_MAX 255
+		.maximum = CONTRAST_MAX,
 		.step    = 1,
-#define CONTRAST_DEF 127
+#define CONTRAST_DEF 60
 		.default_value = CONTRAST_DEF,
 	    },
 	    .set = sd_setcontrast,
@@ -94,7 +95,7 @@ static struct ctrl sd_ctrls[] = {
 	    {
 		.id      = V4L2_CID_SATURATION,
 		.type    = V4L2_CTRL_TYPE_INTEGER,
-		.name    = "Color",
+		.name    = "Saturation",
 		.minimum = 0,
 		.maximum = 255,
 		.step    = 1,
@@ -429,13 +430,42 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
+/* rev 12a only */
+static void setbrightcont(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i, v;
+	static const __u8 max[10] =
+		{0x29, 0x33, 0x42, 0x5a, 0x6e, 0x80, 0x9f, 0xbb,
+		 0xd4, 0xec};
+	static const __u8 delta[10] =
+		{0x35, 0x33, 0x33, 0x2f, 0x2a, 0x25, 0x1e, 0x17,
+		 0x11, 0x0b};
+
+	reg_w(gspca_dev, 0xff, 0x00);	/* page 0 */
+	for (i = 0; i < 10; i++) {
+		v = max[i];
+		v += (sd->brightness - BRIGHTNESS_MAX)
+			* 150 / BRIGHTNESS_MAX;		/* 200 ? */
+		v -= delta[i] * sd->contrast / CONTRAST_MAX;
+		if (v < 0)
+			v = 0;
+		else if (v > 0xff)
+			v = 0xff;
+		reg_w(gspca_dev, 0xa2 + i, v);
+	}
+	reg_w(gspca_dev, 0xdc, 0x01);
+}
+
 static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int brightness;
 
-	if (sd->sensor == SENSOR_PAC7302)
+	if (sd->sensor == SENSOR_PAC7302) {
+		setbrightcont(gspca_dev);
 		return;
+	}
 /*jfm: inverted?*/
 	brightness = BRIGHTNESS_MAX - sd->brightness;
 	reg_w(gspca_dev, 0xff, 0x04);
@@ -449,13 +479,14 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (sd->sensor == SENSOR_PAC7302)
+	if (sd->sensor == SENSOR_PAC7302) {
+		setbrightcont(gspca_dev);
 		return;
+	}
 	reg_w(gspca_dev, 0xff, 0x01);
 	reg_w(gspca_dev, 0x80, sd->contrast);
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
-	PDEBUG(D_CONF|D_STREAM, "contrast: %i", sd->contrast);
 }
 
 static void setcolors(struct gspca_dev *gspca_dev)
-- 
GitLab


From 41b469745f6218efb22bec4e3940b085ffb97216 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:58 -0300
Subject: [PATCH 705/869] V4L/DVB (8707): gspca: Colors, hflip and vflip
 controls added for pac7302.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/pac7311.c | 107 +++++++++++++++++++++++++++-
 1 file changed, 105 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 3abc018f969..a89cc9fd153 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -40,6 +40,8 @@ struct sd {
 	unsigned char contrast;
 	unsigned char colors;
 	unsigned char autogain;
+	__u8 hflip;
+	__u8 vflip;
 
 	char tosof;	/* number of bytes before next start of frame */
 	signed char ag_cnt;
@@ -59,6 +61,10 @@ static int sd_setcolors(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
 	{
@@ -97,7 +103,8 @@ static struct ctrl sd_ctrls[] = {
 		.type    = V4L2_CTRL_TYPE_INTEGER,
 		.name    = "Saturation",
 		.minimum = 0,
-		.maximum = 255,
+#define COLOR_MAX 255
+		.maximum = COLOR_MAX,
 		.step    = 1,
 #define COLOR_DEF 127
 		.default_value = COLOR_DEF,
@@ -119,6 +126,35 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setautogain,
 	    .get = sd_getautogain,
 	},
+/* next controls work with pac7302 only */
+	{
+	    {
+		.id      = V4L2_CID_HFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Mirror",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define HFLIP_DEF 0
+		.default_value = HFLIP_DEF,
+	    },
+	    .set = sd_sethflip,
+	    .get = sd_gethflip,
+	},
+	{
+	    {
+		.id      = V4L2_CID_VFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Vflip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define VFLIP_DEF 0
+		.default_value = VFLIP_DEF,
+	    },
+	    .set = sd_setvflip,
+	    .get = sd_getvflip,
+	},
 };
 
 static struct v4l2_pix_format vga_mode[] = {
@@ -493,8 +529,25 @@ static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	if (sd->sensor == SENSOR_PAC7302)
+	if (sd->sensor == SENSOR_PAC7302) {
+		int i, v;
+		static const int a[9] =
+			{217, -212, 0, -101, 170, -67, -38, -315, 355};
+		static const int b[9] =
+			{19, 106, 0, 19, 106, 1, 19, 106, 1};
+
+		reg_w(gspca_dev, 0xff, 0x03);	/* page 3 */
+		reg_w(gspca_dev, 0x11, 0x01);
+		reg_w(gspca_dev, 0xff, 0x00);	/* page 0 */
+		reg_w(gspca_dev, 0xff, 0x00);	/* page 0 */
+		for (i = 0; i < 9; i++) {
+			v = a[i] * sd->colors / COLOR_MAX + b[i];
+			reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07);
+			reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
+		}
+		reg_w(gspca_dev, 0xdc, 0x01);
 		return;
+	}
 	reg_w(gspca_dev, 0xff, 0x01);
 	reg_w(gspca_dev, 0x10, sd->colors);
 	/* load registers to sensor (Bit 0, auto clear) */
@@ -514,6 +567,19 @@ static void setautogain(struct gspca_dev *gspca_dev)
 	}
 }
 
+/* this function is used by pac7302 only */
+static void sethvflip(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	__u8 data;
+
+	reg_w(gspca_dev, 0xff, 0x03);		/* page 3 */
+	data = (sd->hflip ? 0x00 : 0x08)
+		| (sd->vflip ? 0x04 : 0x00);
+	reg_w(gspca_dev, 0x21, data);
+	reg_w(gspca_dev, 0x11, 0x01);
+}
+
 /* this function is called at open time */
 static int sd_open(struct gspca_dev *gspca_dev)
 {
@@ -574,6 +640,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	/* start stream */
 	reg_w(gspca_dev, 0xff, 0x01);
 	if (sd->sensor == SENSOR_PAC7302) {
+		sethvflip(gspca_dev);
 		reg_w(gspca_dev, 0x78, 0x01);
 		reg_w(gspca_dev, 0xff, 0x01);
 		reg_w(gspca_dev, 0x78, 0x01);
@@ -790,6 +857,42 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->hflip = val;
+	if (gspca_dev->streaming)
+		sethvflip(gspca_dev);
+	return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->hflip;
+	return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vflip = val;
+	if (gspca_dev->streaming)
+		sethvflip(gspca_dev);
+	return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->vflip;
+	return 0;
+}
+
 /* sub-driver description */
 static struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
-- 
GitLab


From 05b809c702bf297690c63ea78ee117c4dc909028 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:47:59 -0300
Subject: [PATCH 706/869] V4L/DVB (8709): gspca: Fix initialization and
 controls of sn9x110 - ov7630.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 199 ++++++++++++++---------------
 1 file changed, 97 insertions(+), 102 deletions(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 47737bf04c6..b17aaa45270 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -59,6 +59,7 @@ struct sd {
 #define SENSOR_OV7648 5
 #define SENSOR_OV7660 6
 	unsigned char i2c_base;
+	__u8 regf1;
 };
 
 /* V4L2 controls supported by the driver */
@@ -78,7 +79,8 @@ static struct ctrl sd_ctrls[] = {
 		.type    = V4L2_CTRL_TYPE_INTEGER,
 		.name    = "Brightness",
 		.minimum = 0,
-		.maximum = 0xffff,
+#define BRIGHTNESS_MAX 0xffff
+		.maximum = BRIGHTNESS_MAX,
 		.step    = 1,
 #define BRIGHTNESS_DEF 0x7fff
 		.default_value = BRIGHTNESS_DEF,
@@ -92,7 +94,8 @@ static struct ctrl sd_ctrls[] = {
 		.type    = V4L2_CTRL_TYPE_INTEGER,
 		.name    = "Contrast",
 		.minimum = 0,
-		.maximum = 127,
+#define CONTRAST_MAX 127
+		.maximum = CONTRAST_MAX,
 		.step    = 1,
 #define CONTRAST_DEF 63
 		.default_value = CONTRAST_DEF,
@@ -240,27 +243,16 @@ static const __u8 *sn_tb[] = {
 	sn_ov7660
 };
 
-static const __u8 regsn20[] = {
+static const __u8 gamma_def[] = {
 	0x00, 0x2d, 0x46, 0x5a, 0x6c, 0x7c, 0x8b, 0x99,
 	0xa6, 0xb2, 0xbf, 0xca, 0xd5, 0xe0, 0xeb, 0xf5, 0xff
 };
-static const __u8 regsn20_sn9c325[] = {
-	0x0a, 0x3a, 0x56, 0x6c, 0x7e, 0x8d, 0x9a, 0xa4,
-	0xaf, 0xbb, 0xc5, 0xcd, 0xd5, 0xde, 0xe8, 0xed, 0xf5
-};
 
 static const __u8 reg84[] = {
 	0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe5, 0x0f,
 	0xe4, 0x0f, 0x38, 0x00, 0x3e, 0x00, 0xc3, 0x0f,
-/*	0x00, 0x00, 0x00, 0x00, 0x00 */
-	0xf7, 0x0f, 0x0a, 0x00, 0x00
-};
-static const __u8 reg84_sn9c325[] = {
-	0x14, 0x00, 0x27, 0x00, 0x07, 0x00, 0xe4, 0x0f,
-	0xd3, 0x0f, 0x4b, 0x00, 0x48, 0x00, 0xc0, 0x0f,
-	0xf8, 0x0f, 0x00, 0x00, 0x00
+	0xf7, 0x0f, 0x00, 0x00, 0x00
 };
-
 static const __u8 hv7131r_sensor_init[][8] = {
 	{0xC1, 0x11, 0x01, 0x08, 0x01, 0x00, 0x00, 0x10},
 	{0xB1, 0x11, 0x34, 0x17, 0x7F, 0x00, 0x00, 0x10},
@@ -411,7 +403,7 @@ static const __u8 ov7630_sensor_init[][8] = {
 	{0xa1, 0x21, 0x12, 0xc8, 0x00, 0x00, 0x00, 0x10},
 /* win: delay 20ms */
 	{0xa1, 0x21, 0x12, 0x48, 0x00, 0x00, 0x00, 0x10},
-/* win: loop on 2 wwrite, 1 read */
+/* win: i2c_r from 00 to 80 */
 	{0xd1, 0x21, 0x03, 0x80, 0x10, 0x20, 0x80, 0x10},
 	{0xb1, 0x21, 0x0c, 0x20, 0x20, 0x00, 0x00, 0x10},
 	{0xd1, 0x21, 0x11, 0x00, 0x48, 0xc0, 0x00, 0x10},
@@ -446,9 +438,11 @@ static const __u8 ov7630_sensor_init[][8] = {
 	{0xa1, 0x21, 0x10, 0x32, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xb1, 0x21, 0x01, 0x80, 0x80, 0x00, 0x00, 0x10},
+/* */
 	{0xa1, 0x21, 0x11, 0x00, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x2a, 0x88, 0x00, 0x00, 0x00, 0x10},
 	{0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10},
+/* */
 	{0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10},
 	{0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10},
 	{}
@@ -778,7 +772,7 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 	static const __u8 regd4[] = {0x60, 0x00, 0x00};
 
 	reg_w1(gspca_dev, 0xf1, 0x00);
-	reg_w1(gspca_dev, 0x01, 0x00);		/*jfm was sn9c1xx[1] in v1*/
+	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
 
 	/* configure gpio */
 	reg_w(gspca_dev, 0x01, &sn9c1xx[1], 2);
@@ -805,6 +799,13 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 		reg_w1(gspca_dev, 0x17, 0x64);
 		reg_w1(gspca_dev, 0x01, 0x42);
 		break;
+/*jfm: from win trace */
+	case SENSOR_OV7630:
+		reg_w1(gspca_dev, 0x01, 0x61);
+		reg_w1(gspca_dev, 0x17, 0xe2);
+		reg_w1(gspca_dev, 0x01, 0x60);
+		reg_w1(gspca_dev, 0x01, 0x40);
+		break;
 	case SENSOR_OV7648:
 		reg_w1(gspca_dev, 0x01, 0x43);
 		reg_w1(gspca_dev, 0x17, 0xae);
@@ -870,9 +871,20 @@ static void ov7630_InitSensor(struct gspca_dev *gspca_dev)
 {
 	int i = 0;
 
-	i2c_w8(gspca_dev, ov7630_sensor_init[i]);
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);	/* 76 01 */
+	i++;
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);	/* 12 c8 (RGB+SRST) */
 	i++;
 	msleep(20);
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);	/* 12 48 */
+	i++;
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);	/* 12 c8 */
+	i++;
+	msleep(20);
+	i2c_w8(gspca_dev, ov7630_sensor_init[i]);	/* 12 48 */
+	i++;
+/*jfm:win i2c_r from 00 to 80*/
+
 	while (ov7630_sensor_init[i][0]) {
 		i2c_w8(gspca_dev, ov7630_sensor_init[i]);
 		i++;
@@ -917,6 +929,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->bridge = id->driver_info >> 16;
 	sd->sensor = id->driver_info >> 8;
 	sd->i2c_base = id->driver_info;
+	sd->regf1 = 0;			/*jfm: was 1 in v1*/
 
 	sd->qindex = 4;			/* set the quantization table */
 	sd->brightness = BRIGHTNESS_DEF;
@@ -969,7 +982,7 @@ static int sd_open(struct gspca_dev *gspca_dev)
 		break;
 	}
 
-	reg_w1(gspca_dev, 0xf1, 0x01);
+	reg_w1(gspca_dev, 0xf1, sd->regf1);
 
 	return 0;
 }
@@ -1051,6 +1064,28 @@ static unsigned int setexposure(struct gspca_dev *gspca_dev,
 	return expo;
 }
 
+/* this function is used for sensors o76xx only */
+static void setbrightcont(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	unsigned val;
+	__u8 reg84_full[13];
+
+	memset(reg84_full, 0, sizeof reg84_full);
+	val = sd->contrast * 0x20 / CONTRAST_MAX + 0x10;	/* 10..30 */
+	reg84_full[2] = val;
+	reg84_full[0] = (val + 1) / 2;
+	reg84_full[4] = (val + 1) / 5;
+	if (val > BRIGHTNESS_DEF)
+		val = (sd->brightness - BRIGHTNESS_DEF) * 0x20
+			/ BRIGHTNESS_MAX;
+	else
+		val = 0;
+	reg84_full[10] = val;			/* 00..1f */
+	reg_w(gspca_dev, 0x84, reg84_full, sizeof reg84_full);
+}
+
+/* sensor != ov76xx */
 static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -1082,6 +1117,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, 0x96, k2);
 }
 
+/* sensor != ov76xx */
 static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -1175,24 +1211,11 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, 0x07, sn9c1xx[7]);
 	reg_w1(gspca_dev, 0x06, sn9c1xx[6]);
 	reg_w1(gspca_dev, 0x14, sn9c1xx[0x14]);
-	switch (sd->bridge) {
-	case BRIDGE_SN9C325:
-		reg_w(gspca_dev, 0x20, regsn20_sn9c325,
-				sizeof regsn20_sn9c325);
-		for (i = 0; i < 8; i++)
-			reg_w(gspca_dev, 0x84, reg84_sn9c325,
-					sizeof reg84_sn9c325);
-		reg_w1(gspca_dev, 0x9a, 0x0a);
-		reg_w1(gspca_dev, 0x99, 0x60);
-		break;
-	default:
-		reg_w(gspca_dev, 0x20, regsn20, sizeof regsn20);
-		for (i = 0; i < 8; i++)
-			reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
+	reg_w(gspca_dev, 0x20, gamma_def, sizeof gamma_def);
+	for (i = 0; i < 8; i++)
+		reg_w(gspca_dev, 0x84, reg84, sizeof reg84);
 		reg_w1(gspca_dev, 0x9a, 0x08);
 		reg_w1(gspca_dev, 0x99, 0x59);
-		break;
-	}
 
 	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
 	if (mode)
@@ -1272,8 +1295,18 @@ static void sd_start(struct gspca_dev *gspca_dev)
 
 	reg_w1(gspca_dev, 0x17, reg17);
 	reg_w1(gspca_dev, 0x01, reg1);
-	setbrightness(gspca_dev);
-	setcontrast(gspca_dev);
+	switch (sd->sensor) {
+	case SENSOR_HV7131R:
+	case SENSOR_MI0360:
+	case SENSOR_MO4000:
+	case SENSOR_OM6802:
+		setbrightness(gspca_dev);
+		setcontrast(gspca_dev);
+		break;
+	default:			/* OV76xx */
+		setbrightcont(gspca_dev);
+		break;
+	}
 	setautogain(gspca_dev);
 }
 
@@ -1311,7 +1344,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
 	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
 	reg_w1(gspca_dev, 0x01, data);
-	reg_w1(gspca_dev, 0xf1, 0x01);
+	reg_w1(gspca_dev, 0xf1, sd->regf1);
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
@@ -1409,72 +1442,24 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
 }
 
-static unsigned int getexposure(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	__u8 hexpo, mexpo, lexpo;
-
-	switch (sd->sensor) {
-	case SENSOR_HV7131R:
-		/* read sensor exposure */
-		i2c_r5(gspca_dev, 0x25);
-		return (gspca_dev->usb_buf[0] << 16)
-			| (gspca_dev->usb_buf[1] << 8)
-			| gspca_dev->usb_buf[2];
-	case SENSOR_MI0360:
-		/* read sensor exposure */
-		i2c_r5(gspca_dev, 0x09);
-		return (gspca_dev->usb_buf[0] << 8)
-			| gspca_dev->usb_buf[1];
-	default:
-/*	case SENSOR_MO4000: */
-		i2c_r5(gspca_dev, 0x0e);
-		hexpo = 0;		/* gspca_dev->usb_buf[1] & 0x07; */
-		mexpo = 0x40;		/* gspca_dev->usb_buf[2] & 0xff; */
-		lexpo = (gspca_dev->usb_buf[1] & 0x30) >> 4;
-		PDEBUG(D_CONF, "exposure %d",
-			(hexpo << 10) | (mexpo << 2) | lexpo);
-		return (hexpo << 10) | (mexpo << 2) | lexpo;
-#if 0
-/*jfm: not called*/
-/*	case SENSOR_OV7648:		* jfm: is it ok for 7648? */
-/*	case SENSOR_OV7660: */
-		/* read sensor exposure */
-		i2c_r5(gspca_dev, 0x04);
-		hexpo = gspca_dev->usb_buf[3] & 0x2f;
-		lexpo = gspca_dev->usb_buf[0] & 0x02;
-		i2c_r5(gspca_dev, 0x08);
-		mexpo = gspca_dev->usb_buf[2];
-		return (hexpo << 10) | (mexpo << 2) | lexpo;
-#endif
-	}
-	/* not reached */
-}
-
-static void getbrightness(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	/* hardcoded registers seem not readable */
-	switch (sd->sensor) {
-	case SENSOR_HV7131R:
-		sd->brightness = getexposure(gspca_dev) >> 4;
-		break;
-	case SENSOR_MI0360:
-	case SENSOR_MO4000:
-	case SENSOR_OM6802:
-		sd->brightness = getexposure(gspca_dev) << 4;
-		break;
-	}
-}
-
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->brightness = val;
-	if (gspca_dev->streaming)
-		setbrightness(gspca_dev);
+	if (gspca_dev->streaming) {
+		switch (sd->sensor) {
+		case SENSOR_HV7131R:
+		case SENSOR_MI0360:
+		case SENSOR_MO4000:
+		case SENSOR_OM6802:
+			setbrightness(gspca_dev);
+			break;
+		default:			/* OV76xx */
+			setbrightcont(gspca_dev);
+			break;
+		}
+	}
 	return 0;
 }
 
@@ -1482,7 +1467,6 @@ static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	getbrightness(gspca_dev);
 	*val = sd->brightness;
 	return 0;
 }
@@ -1492,8 +1476,19 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->contrast = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
+	if (gspca_dev->streaming) {
+		switch (sd->sensor) {
+		case SENSOR_HV7131R:
+		case SENSOR_MI0360:
+		case SENSOR_MO4000:
+		case SENSOR_OM6802:
+			setcontrast(gspca_dev);
+			break;
+		default:			/* OV76xx */
+			setbrightcont(gspca_dev);
+			break;
+		}
+	}
 	return 0;
 }
 
-- 
GitLab


From d55b83d3c4558d0d118bf20ef3f1fa65b1c75c3d Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:48:01 -0300
Subject: [PATCH 707/869] V4L/DVB (8710): gspca: Bad color control in sonixj.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index b17aaa45270..c34e02dccd5 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -794,7 +794,7 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 
 	switch (sd->sensor) {
 	case SENSOR_OM6802:
-		reg_w1(gspca_dev, 0x02, 0x71);
+		reg_w1(gspca_dev, 0x02, 0x73);		/* was 71 */
 		reg_w1(gspca_dev, 0x01, 0x42);
 		reg_w1(gspca_dev, 0x17, 0x64);
 		reg_w1(gspca_dev, 0x01, 0x42);
@@ -1056,7 +1056,7 @@ static unsigned int setexposure(struct gspca_dev *gspca_dev,
 			expo = 0x0001;
 		gainOm[3] = expo >> 2;
 		i2c_w8(gspca_dev, gainOm);
-		reg_w1(gspca_dev, 0x96, expo >> 5);
+		reg_w1(gspca_dev, 0x96, (expo >> 5) & 0x1f);
 		PDEBUG(D_CONF, "set exposure %d", gainOm[3]);
 		break;
 	    }
@@ -1138,11 +1138,13 @@ static void setcolors(struct gspca_dev *gspca_dev)
 	int colour;
 
 	colour = sd->colors - 128;
-	if (colour > 0)
+	if (colour > 0) {
 		data = (colour + 32) & 0x7f;	/* blue */
-	else
+		reg_w1(gspca_dev, 0x06, data);
+	} else {
 		data = (-colour + 32) & 0x7f;	/* red */
-	reg_w1(gspca_dev, 0x05, data);
+		reg_w1(gspca_dev, 0x05, data);
+	}
 }
 
 static void setautogain(struct gspca_dev *gspca_dev)
-- 
GitLab


From 4a18625e88efef2b5a21695edcb2b21d98fdf71b Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:48:02 -0300
Subject: [PATCH 708/869] V4L/DVB (8711): gspca: Bad controls and quantization
 table of pac7311.

Patch adapted from a gspca v1 patch by Thomas Kaiser.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/pac7311.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index a89cc9fd153..e4f56e0d3ff 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -42,6 +42,7 @@ struct sd {
 	unsigned char autogain;
 	__u8 hflip;
 	__u8 vflip;
+	__u8 qindex;
 
 	char tosof;	/* number of bytes before next start of frame */
 	signed char ag_cnt;
@@ -462,6 +463,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->contrast = CONTRAST_DEF;
 	sd->colors = COLOR_DEF;
 	sd->autogain = AUTOGAIN_DEF;
+	sd->hflip = HFLIP_DEF;
+	sd->vflip = VFLIP_DEF;
+	sd->qindex = 3;
 	sd->ag_cnt = -1;
 	return 0;
 }
@@ -505,6 +509,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 /*jfm: inverted?*/
 	brightness = BRIGHTNESS_MAX - sd->brightness;
 	reg_w(gspca_dev, 0xff, 0x04);
+	reg_w(gspca_dev, 0x0e, 0x00);
 	reg_w(gspca_dev, 0x0f, brightness);
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
@@ -520,7 +525,7 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		return;
 	}
 	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x80, sd->contrast);
+	reg_w(gspca_dev, 0x10, sd->contrast);
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
 }
@@ -549,7 +554,7 @@ static void setcolors(struct gspca_dev *gspca_dev)
 		return;
 	}
 	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x10, sd->colors);
+	reg_w(gspca_dev, 0x80, sd->colors);
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
 	PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
@@ -583,7 +588,7 @@ static void sethvflip(struct gspca_dev *gspca_dev)
 /* this function is called at open time */
 static int sd_open(struct gspca_dev *gspca_dev)
 {
-	reg_w(gspca_dev, 0x78, 0x00);	/* Turn on LED */
+	reg_w(gspca_dev, 0x78, 0x44);	/* Turn on LED */
 	return 0;
 }
 
@@ -612,27 +617,24 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		reg_w(gspca_dev, 0x08, 0x09);
 		reg_w(gspca_dev, 0x17, 0x20);
 		reg_w(gspca_dev, 0x1b, 0x00);
-/*		reg_w(gspca_dev, 0x80, 0x69); */
 		reg_w(gspca_dev, 0x87, 0x10);
 		break;
 	case 1:					/* 320x240 pac7311 */
 		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x02, 0x03);
+		reg_w(gspca_dev, 0x02, 0x07);
 		reg_w(gspca_dev, 0xff, 0x01);
 		reg_w(gspca_dev, 0x08, 0x09);
 		reg_w(gspca_dev, 0x17, 0x30);
-/*		reg_w(gspca_dev, 0x80, 0x3f); */
 		reg_w(gspca_dev, 0x87, 0x11);
 		break;
 	case 0:					/* 640x480 */
 		if (sd->sensor == SENSOR_PAC7302)
 			break;
 		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x02, 0x03);
+		reg_w(gspca_dev, 0x02, 0x07);
 		reg_w(gspca_dev, 0xff, 0x01);
 		reg_w(gspca_dev, 0x08, 0x08);
 		reg_w(gspca_dev, 0x17, 0x00);
-/*		reg_w(gspca_dev, 0x80, 0x1c); */
 		reg_w(gspca_dev, 0x87, 0x12);
 		break;
 	}
@@ -645,8 +647,8 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		reg_w(gspca_dev, 0xff, 0x01);
 		reg_w(gspca_dev, 0x78, 0x01);
 	} else {
-		reg_w(gspca_dev, 0x78, 0x04);
-		reg_w(gspca_dev, 0x78, 0x05);
+		reg_w(gspca_dev, 0x78, 0x44);
+		reg_w(gspca_dev, 0x78, 0x45);
 	}
 }
 
@@ -666,7 +668,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x2a, 0x0e);
 	reg_w(gspca_dev, 0xff, 0x01);
 	reg_w(gspca_dev, 0x3e, 0x20);
-	reg_w(gspca_dev, 0x78, 0x04); /* Bit_0=start stream, Bit_7=LED */
+	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
 	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
 	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
 }
@@ -757,7 +759,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 		if (sd->tosof > LUM_OFFSET)
 			sd->lum_sum += data[-LUM_OFFSET];
 		sd->tosof = 0;
-		jpeg_put_header(gspca_dev, frame, 1, 0x21);
+		jpeg_put_header(gspca_dev, frame, sd->qindex, 0x21);
 	}
 
 	for (i = 0; i < len; i++) {
@@ -777,7 +779,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 				sd->tosof = -len;
 				break;
 			}
-			jpeg_put_header(gspca_dev, frame, 1, 0x21);
+			jpeg_put_header(gspca_dev, frame, sd->qindex, 0x21);
 			break;
 		}
 	}
-- 
GitLab


From 759aa3c21ebbab6cc00fc4aebd09b3a7d63715d1 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:48:03 -0300
Subject: [PATCH 709/869] V4L/DVB (8712): gspca: Bad start of sonixj webcams
 since changeset a8779025e7e8.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index c34e02dccd5..6673a3edf19 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -59,7 +59,6 @@ struct sd {
 #define SENSOR_OV7648 5
 #define SENSOR_OV7660 6
 	unsigned char i2c_base;
-	__u8 regf1;
 };
 
 /* V4L2 controls supported by the driver */
@@ -929,7 +928,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->bridge = id->driver_info >> 16;
 	sd->sensor = id->driver_info >> 8;
 	sd->i2c_base = id->driver_info;
-	sd->regf1 = 0;			/*jfm: was 1 in v1*/
 
 	sd->qindex = 4;			/* set the quantization table */
 	sd->brightness = BRIGHTNESS_DEF;
@@ -982,7 +980,7 @@ static int sd_open(struct gspca_dev *gspca_dev)
 		break;
 	}
 
-	reg_w1(gspca_dev, 0xf1, sd->regf1);
+	reg_w1(gspca_dev, 0xf1, 0x01);
 
 	return 0;
 }
@@ -1346,7 +1344,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, 0x17, sn9c1xx[0x17]);
 	reg_w1(gspca_dev, 0x01, sn9c1xx[1]);
 	reg_w1(gspca_dev, 0x01, data);
-	reg_w1(gspca_dev, 0xf1, sd->regf1);
+	reg_w1(gspca_dev, 0xf1, 0x00);
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
-- 
GitLab


From 9c5f70f248ccce6d943904e6da687c6ec062f072 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:48:04 -0300
Subject: [PATCH 710/869] V4L/DVB (8713): gspca: Bad color control again in
 sonixj.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 6673a3edf19..19c9791309e 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -108,9 +108,9 @@ static struct ctrl sd_ctrls[] = {
 		.type    = V4L2_CTRL_TYPE_INTEGER,
 		.name    = "Color",
 		.minimum = 0,
-		.maximum = 255,
+		.maximum = 64,
 		.step    = 1,
-#define COLOR_DEF 127
+#define COLOR_DEF 32
 		.default_value = COLOR_DEF,
 	    },
 	    .set = sd_setcolors,
@@ -1132,17 +1132,18 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	__u8 data;
-	int colour;
+	__u8 blue, red;
 
-	colour = sd->colors - 128;
-	if (colour > 0) {
-		data = (colour + 32) & 0x7f;	/* blue */
-		reg_w1(gspca_dev, 0x06, data);
+	if (sd->colors >= 32) {
+		red = 32 + (sd->colors - 32) / 2;
+		blue = 64 - sd->colors;
 	} else {
-		data = (-colour + 32) & 0x7f;	/* red */
-		reg_w1(gspca_dev, 0x05, data);
+		red = sd->colors;
+		blue = 32 + (32 - sd->colors) / 2;
 	}
+	reg_w1(gspca_dev, 0x05, red);
+/*	reg_w1(gspca_dev, 0x07, 32); */
+	reg_w1(gspca_dev, 0x06, blue);
 }
 
 static void setautogain(struct gspca_dev *gspca_dev)
-- 
GitLab


From 4f30f6cf6b1baf2d19f6b575c4486ae6dc0c2a00 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:48:05 -0300
Subject: [PATCH 711/869] V4L/DVB (8714): gspca: Bad start of sn9c110 and
 sensor om6802.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 19c9791309e..7860061f3de 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -793,7 +793,7 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 
 	switch (sd->sensor) {
 	case SENSOR_OM6802:
-		reg_w1(gspca_dev, 0x02, 0x73);		/* was 71 */
+		reg_w1(gspca_dev, 0x02, 0x71);
 		reg_w1(gspca_dev, 0x01, 0x42);
 		reg_w1(gspca_dev, 0x17, 0x64);
 		reg_w1(gspca_dev, 0x01, 0x42);
-- 
GitLab


From 142346bf9f2410b32cd219cf3f70a85ac56d5b85 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:48:07 -0300
Subject: [PATCH 712/869] V4L/DVB (8715): gspca: Change the name of some webcam
 in the gspca doc.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 Documentation/video4linux/gspca.txt | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index c7fc9fa8bec..2dd2f774dd8 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -88,14 +88,14 @@ zc3xx		0471:0325	Philips SPC 200 NC
 zc3xx		0471:0326	Philips SPC 300 NC
 sonixj		0471:0327	Philips SPC 600 NC
 sonixj		0471:0328	Philips SPC 700 NC
-zc3xx		0471:032d	Philips spc210nc
-zc3xx		0471:032e	Philips spc315nc
-sonixj		0471:0330	Philips SPC 710NC
+zc3xx		0471:032d	Philips SPC 210 NC
+zc3xx		0471:032e	Philips SPC 315 NC
+sonixj		0471:0330	Philips SPC 710 NC
 spca501		0497:c001	Smile International
 sunplus		04a5:3003	Benq DC 1300
 sunplus		04a5:3008	Benq DC 1500
-sunplus		04a5:300a	Benq DC3410
-spca500		04a5:300c	Benq DC1016
+sunplus		04a5:300a	Benq DC 3410
+spca500		04a5:300c	Benq DC 1016
 sunplus		04f1:1001	JVC GC A50
 spca561		04fc:0561	Flexcam 100
 sunplus		04fc:500c	Sunplus CA500C
@@ -175,18 +175,18 @@ sunplus		08ca:2060	Aiptek PocketDV5300
 tv8532		0923:010f	ICM532 cams
 mars		093a:050f	Mars-Semi Pc-Camera
 pac207		093a:2460	PAC207 Qtec Webcam 100
-pac207		093a:2463	Philips spc200nc pac207
+pac207		093a:2463	Philips SPC 220 NC
 pac207		093a:2464	Labtec Webcam 1200
 pac207		093a:2468	PAC207
 pac207		093a:2470	Genius GF112
-pac207		093a:2471	PAC207 Genius VideoCam ge111
-pac207		093a:2472	PAC207 Genius VideoCam ge110
+pac207		093a:2471	Genius VideoCam ge111
+pac207		093a:2472	Genius VideoCam ge110
 pac7311		093a:2600	PAC7311 Typhoon
-pac7311		093a:2601	PAC7311 Phillips SPC610NC
+pac7311		093a:2601	Philips SPC 610 NC
 pac7311		093a:2603	PAC7312
-pac7311		093a:2608	PAC7311 Trust WB-3300p
-pac7311		093a:260e	PAC7311 Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
-pac7311		093a:260f	PAC7311 SnakeCam
+pac7311		093a:2608	Trust WB-3300p
+pac7311		093a:260e	Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
+pac7311		093a:260f	SnakeCam
 pac7311		093a:2621	PAC731x
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
@@ -235,7 +235,7 @@ zc3xx		10fd:0128	Typhoon Webshot II USB 300k 0x0128
 spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 spca501		1776:501c	Arowana 300K CMOS Camera
-t613		17a1:0128	T613/TAS5130A
+t613		17a1:0128	TASCORP JPEG Webcam, NGS Cyclops
 vc032x		17ef:4802	Lenovo Vc0323+MI1310_SOC
 pac207		2001:f115	D-Link DSB-C120
 spca500		2899:012c	Toptro Industrial
-- 
GitLab


From 5b064da80831500a6ac6ea501d2d0cb5e8323cc7 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:48:08 -0300
Subject: [PATCH 713/869] V4L/DVB (8716): gspca: Bad start of sn9c110 and
 sensor ov7630.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 7860061f3de..e0ba50c96f3 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1248,7 +1248,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	case SENSOR_OV7630:
 		ov7630_InitSensor(gspca_dev);
 		reg17 = 0xe2;
-		reg1 = 0x40;
+		reg1 = 0x44;
 		break;
 	case SENSOR_OV7648:
 		ov7648_InitSensor(gspca_dev);
-- 
GitLab


From 5d05294ac8f6b5d592ee3379fbddd0fb9d1b4c87 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:48:09 -0300
Subject: [PATCH 714/869] V4L/DVB (8717): gspca: Frame buffer too small for
 small resolutions (sonixj and t613).

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 2 +-
 drivers/media/video/gspca/t613.c   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index e0ba50c96f3..11a29a96960 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -135,7 +135,7 @@ static struct ctrl sd_ctrls[] = {
 static struct v4l2_pix_format vga_mode[] = {
 	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 3 / 8 + 590,
+		.sizeimage = 160 * 120 * 4 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 2},
 	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 91b555c34c6..fd6918eefbb 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -233,7 +233,7 @@ static char *effects_control[] = {
 static struct v4l2_pix_format vga_mode_t16[] = {
 	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120 * 3 / 8 + 590,
+		.sizeimage = 160 * 120 * 4 / 8 + 590,
 		.colorspace = V4L2_COLORSPACE_JPEG,
 		.priv = 4},
 	{176, 144, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
-- 
GitLab


From 6a709749228c5f76f128c69c16f39a52d639bd96 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:48:10 -0300
Subject: [PATCH 715/869] V4L/DVB (8718): gspca: suspend/resume added.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/conex.c   |  4 ++++
 drivers/media/video/gspca/etoms.c   |  4 ++++
 drivers/media/video/gspca/gspca.c   | 30 ++++++++++++++++++++++++++++-
 drivers/media/video/gspca/gspca.h   |  7 +++++++
 drivers/media/video/gspca/mars.c    |  4 ++++
 drivers/media/video/gspca/ov519.c   |  4 ++++
 drivers/media/video/gspca/pac207.c  |  4 ++++
 drivers/media/video/gspca/pac7311.c |  4 ++++
 drivers/media/video/gspca/sonixb.c  |  4 ++++
 drivers/media/video/gspca/sonixj.c  |  4 ++++
 drivers/media/video/gspca/spca500.c |  4 ++++
 drivers/media/video/gspca/spca501.c |  4 ++++
 drivers/media/video/gspca/spca505.c |  4 ++++
 drivers/media/video/gspca/spca506.c |  4 ++++
 drivers/media/video/gspca/spca508.c |  4 ++++
 drivers/media/video/gspca/spca561.c |  4 ++++
 drivers/media/video/gspca/stk014.c  |  4 ++++
 drivers/media/video/gspca/sunplus.c |  4 ++++
 drivers/media/video/gspca/t613.c    |  4 ++++
 drivers/media/video/gspca/tv8532.c  |  4 ++++
 drivers/media/video/gspca/vc032x.c  |  4 ++++
 drivers/media/video/gspca/zc3xx.c   |  4 ++++
 22 files changed, 116 insertions(+), 1 deletion(-)

diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index cd3a3f5829b..739ef557c43 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -1026,6 +1026,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index ca23c3f9aaa..a3cccab7b81 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -926,6 +926,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 15d302b28b7..2f7bf263255 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -114,7 +114,8 @@ static void fill_frame(struct gspca_dev *gspca_dev,
 	cam_pkt_op pkt_scan;
 
 	if (urb->status != 0) {
-		PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
+		if (!gspca_dev->frozen)
+			PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
 		return;		/* disconnection ? */
 	}
 	pkt_scan = gspca_dev->sd_desc->pkt_scan;
@@ -1808,6 +1809,33 @@ void gspca_disconnect(struct usb_interface *intf)
 }
 EXPORT_SYMBOL(gspca_disconnect);
 
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+	if (!gspca_dev->streaming)
+		return 0;
+	gspca_dev->frozen = 1;		/* avoid urb error messages */
+	gspca_dev->sd_desc->stopN(gspca_dev);
+	destroy_urbs(gspca_dev);
+	gspca_set_alt0(gspca_dev);
+	gspca_dev->sd_desc->stop0(gspca_dev);
+	return 0;
+}
+EXPORT_SYMBOL(gspca_suspend);
+
+int gspca_resume(struct usb_interface *intf)
+{
+	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+	gspca_dev->frozen = 0;
+	if (!gspca_dev->streaming)
+		return 0;
+	return gspca_init_transfer(gspca_dev);
+}
+EXPORT_SYMBOL(gspca_resume);
+#endif
 /* -- cam driver utility functions -- */
 
 /* auto gain and exposure algorithm based on the knee algorithm described here:
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 5cb584546ee..2596568e82f 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -154,6 +154,9 @@ struct gspca_dev {
 	struct mutex queue_lock;	/* ISOC queue protection */
 	__u32 sequence;			/* frame sequence number */
 	char streaming;
+#ifdef CONFIG_PM
+	char frozen;			/* suspend - resume */
+#endif
 	char users;			/* number of opens */
 	char present;			/* device connected */
 	char nbufread;			/* number of buffers for read() */
@@ -173,6 +176,10 @@ struct gspca_frame *gspca_frame_add(struct gspca_dev *gspca_dev,
 				    struct gspca_frame *frame,
 				    const __u8 *data,
 				    int len);
+#ifdef CONFIG_PM
+int gspca_suspend(struct usb_interface *intf, pm_message_t message);
+int gspca_resume(struct usb_interface *intf);
+#endif
 int gspca_auto_gain_n_exposure(struct gspca_dev *gspca_dev, int avg_lum,
 	int desired_avg_lum, int deadzone, int gain_knee, int exposure_knee);
 #endif /* GSPCAV2_H */
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 21c4ee56a10..d7e20957818 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -439,6 +439,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index b4f00ec0885..c132f8d2cf0 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -2132,6 +2132,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index cee45b0486c..d9668f4cb4d 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -596,6 +596,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index e4f56e0d3ff..4cc9379ee41 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -936,6 +936,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 11210c71f66..e535ced79f1 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -1231,6 +1231,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 11a29a96960..0d4677688c9 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1617,6 +1617,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 17fe2c2a440..5a20385fb17 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -1093,6 +1093,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index 51a3c3429ef..525f1b3400e 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -2154,6 +2154,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index eda29d60935..8f00558c2f5 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -855,6 +855,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c
index f622fa75766..ae772488cf7 100644
--- a/drivers/media/video/gspca/spca506.c
+++ b/drivers/media/video/gspca/spca506.c
@@ -772,6 +772,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index 699340c17de..7b38c4e70fd 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -1667,6 +1667,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index ec575f5672d..b6a013f1dec 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -1184,6 +1184,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index 16219cf6a6d..387a8cf2b3b 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -564,6 +564,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 54efa48bee0..c935384fc23 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -1456,6 +1456,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index fd6918eefbb..357a2edad21 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -1014,6 +1014,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c
index 1ff8ba2f7fe..d2273624a91 100644
--- a/drivers/media/video/gspca/tv8532.c
+++ b/drivers/media/video/gspca/tv8532.c
@@ -644,6 +644,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index f4a52956e0d..47c7ce641d9 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -1774,6 +1774,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 /* -- module insert / remove -- */
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index d36f4d7d22b..79436f27cd4 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7584,6 +7584,10 @@ static struct usb_driver sd_driver = {
 	.id_table = device_table,
 	.probe = sd_probe,
 	.disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+#endif
 };
 
 static int __init sd_mod_init(void)
-- 
GitLab


From f9b4a377dc6601a3299171c7b24c2c5189c0c10b Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 16:48:14 -0300
Subject: [PATCH 716/869] V4L/DVB (8719): gspca: Have VIDIOC_QUERYCTRL more
 compliant to the spec.

- return -EINVAL when control not supported.
- start the private controls at V4L2_CID_PRIVATE_BASE.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 5 -----
 drivers/media/video/gspca/t613.c  | 2 +-
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 2f7bf263255..061e1912924 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -884,11 +884,6 @@ static int vidioc_queryctrl(struct file *file, void *priv,
 			return 0;
 		}
 	}
-	if (id >= V4L2_CID_BASE
-	    && id <= V4L2_CID_LASTP1) {
-		q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
-		return 0;
-	}
 	return -EINVAL;
 }
 
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 357a2edad21..962c1df5829 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -30,7 +30,7 @@
 
 #define MAX_GAMMA 0x10		/* 0 to 15 */
 
-#define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 3)
+#define V4L2_CID_EFFECTS (V4L2_CID_PRIVATE_BASE + 0)
 
 MODULE_AUTHOR("Leandro Costantino <le_costantino@pixartargentina.com.ar>");
 MODULE_DESCRIPTION("GSPCA/T613 (JPEG Compliance) USB Camera Driver");
-- 
GitLab


From 89a44b8a690ff2d8639b72931d9c197a8db0c803 Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 16:48:16 -0300
Subject: [PATCH 717/869] V4L/DVB (8720): gspca: V4L2_CAP_SENSOR_UPSIDE_DOWN
 added as a cap for some webcams.

This patch adds a V4L2_CAP_SENSOR_UPSIDE_DOWN flag to the capabilities flags,
and sets this flag for the Philips SPC200NC cam (which has its sensor installed
upside down). The same flag is also needed and added for the Philips SPC300NC.

Together with a patch to libv4l which adds flipping the image in software this
fixes the upside down display with the SPC200NC cam.

Signed-of-by: Hans de Goede <j.w.r.degoede@hhs.nl>

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c |  2 ++
 drivers/media/video/gspca/gspca.h |  4 ++++
 drivers/media/video/gspca/zc3xx.c | 31 +++++++++++++++++++------------
 include/linux/videodev2.h         |  5 +++++
 4 files changed, 30 insertions(+), 12 deletions(-)

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 061e1912924..3461bc9e473 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -851,6 +851,8 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
 			  | V4L2_CAP_STREAMING
 			  | V4L2_CAP_READWRITE;
+	if (gspca_dev->flags & GSPCA_SENSOR_UPSIDE_DOWN_FLAG)
+		cap->capabilities |= V4L2_CAP_SENSOR_UPSIDE_DOWN;
 	return 0;
 }
 
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 2596568e82f..1920c99d6f4 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -118,6 +118,9 @@ struct gspca_frame {
 	struct v4l2_buffer v4l2_buf;
 };
 
+/* defines for the flags member */
+#define GSPCA_SENSOR_UPSIDE_DOWN_FLAG 0x01
+
 struct gspca_dev {
 	struct video_device vdev;	/* !! must be the first item */
 	struct file_operations fops;
@@ -163,6 +166,7 @@ struct gspca_dev {
 	char nurbs;			/* number of allocated URBs */
 	char memory;			/* memory type (V4L2_MEMORY_xxx) */
 	__u8 nbalt;			/* number of USB alternate settings */
+	__u8 flags;                     /* see GSPCA_XXX_FLAG defines */
 };
 
 int gspca_dev_probe(struct usb_interface *intf,
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 79436f27cd4..f1d8c7a08ba 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -70,6 +70,10 @@ struct sd {
 	unsigned short chip_revision;
 };
 
+#define DRIVER_INFO(sensor, flags) .driver_info = ((sensor) << 8) | (flags)
+#define DRIVER_INFO_GET_SENSOR(driver_info) ((driver_info) >> 8)
+#define DRIVER_INFO_GET_FLAGS(driver_info)  ((driver_info) & 0xff)
+
 /* V4L2 controls supported by the driver */
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
@@ -7015,7 +7019,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	/* define some sensors from the vendor/product */
 	sd->sharpness = 2;
-	sd->sensor = id->driver_info;
+	sd->sensor = DRIVER_INFO_GET_SENSOR(id->driver_info);
+	gspca_dev->flags = DRIVER_INFO_GET_FLAGS(id->driver_info);
 	sensor = zcxx_probeSensor(gspca_dev);
 	if (sensor >= 0)
 		PDEBUG(D_PROBE, "probe sensor -> %02x", sensor);
@@ -7505,19 +7510,19 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x041e)},
 #ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x041e, 0x4017)},
-	{USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x041e, 0x401c), DRIVER_INFO(SENSOR_PAS106, 0)},
 	{USB_DEVICE(0x041e, 0x401e)},
 	{USB_DEVICE(0x041e, 0x401f)},
 #endif
 	{USB_DEVICE(0x041e, 0x4029)},
 #ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106},
-	{USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x041e, 0x4034), DRIVER_INFO(SENSOR_PAS106, 0)},
+	{USB_DEVICE(0x041e, 0x4035), DRIVER_INFO(SENSOR_PAS106, 0)},
 	{USB_DEVICE(0x041e, 0x4036)},
 	{USB_DEVICE(0x041e, 0x403a)},
 #endif
-	{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
-	{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
+	{USB_DEVICE(0x041e, 0x4051), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)},
+	{USB_DEVICE(0x041e, 0x4053), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)},
 #ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x0458, 0x7007)},
 	{USB_DEVICE(0x0458, 0x700c)},
@@ -7543,11 +7548,13 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x046d, 0x08d9)},
 	{USB_DEVICE(0x046d, 0x08d8)},
 	{USB_DEVICE(0x046d, 0x08da)},
-	{USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
-	{USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106},
-	{USB_DEVICE(0x0471, 0x0326), .driver_info = SENSOR_PAS106},
-	{USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106},
-	{USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x046d, 0x08dd), DRIVER_INFO(SENSOR_MC501CB, 0)},
+	{USB_DEVICE(0x0471, 0x0325), DRIVER_INFO(SENSOR_PAS106,
+		GSPCA_SENSOR_UPSIDE_DOWN_FLAG)},
+	{USB_DEVICE(0x0471, 0x0326), DRIVER_INFO(SENSOR_PAS106,
+		GSPCA_SENSOR_UPSIDE_DOWN_FLAG)},
+	{USB_DEVICE(0x0471, 0x032d), DRIVER_INFO(SENSOR_PAS106, 0)},
+	{USB_DEVICE(0x0471, 0x032e), DRIVER_INFO(SENSOR_PAS106, 0)},
 	{USB_DEVICE(0x055f, 0xc005)},
 #ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x055f, 0xd003)},
@@ -7559,7 +7566,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0ac8, 0x301b)},
 	{USB_DEVICE(0x0ac8, 0x303b)},
 #endif
-	{USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250},
+	{USB_DEVICE(0x0ac8, 0x305b), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)},
 #ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x0ac8, 0x307b)},
 	{USB_DEVICE(0x10fd, 0x0128)},
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 6c73516b74c..4c30655b293 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -261,6 +261,11 @@ struct v4l2_capability {
 #define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
 #define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
 
+/* This flags gets set if the "sensor" is known to be upside down and this can
+   *not* be fixed using v4l2 flipx/y controls. Note that absence of this flag
+   is not a guarantee for the image not being upside down. */
+#define V4L2_CAP_SENSOR_UPSIDE_DOWN     0x10000000
+
 /*
  *	V I D E O   I M A G E   F O R M A T
  */
-- 
GitLab


From 09a29b771535e0b8cef66946fdaeb43b0e545570 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Wed, 3 Sep 2008 16:48:17 -0300
Subject: [PATCH 718/869] V4L/DVB (8722): sms1xxx: fix typo in license header

This should have read, "GNU General Public License version 2"
rather than, "GNU General Public License version 3"

This was actually a typo mass-blunder -- this is not a change in licence,
as the code was always GPLv2.

Signed-off-by: Uri Shkolnik <uris@siano-ms.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/siano/sms-cards.c  | 2 +-
 drivers/media/dvb/siano/sms-cards.h  | 2 +-
 drivers/media/dvb/siano/smscoreapi.c | 2 +-
 drivers/media/dvb/siano/smscoreapi.h | 2 +-
 drivers/media/dvb/siano/smsdvb.c     | 2 +-
 drivers/media/dvb/siano/smsusb.c     | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/media/dvb/siano/sms-cards.c b/drivers/media/dvb/siano/sms-cards.c
index e7a8ac0c404..cc5efb643f3 100644
--- a/drivers/media/dvb/siano/sms-cards.c
+++ b/drivers/media/dvb/siano/sms-cards.c
@@ -4,7 +4,7 @@
  *  Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/siano/sms-cards.h b/drivers/media/dvb/siano/sms-cards.h
index 83b39bc203f..c8f3da6f9bc 100644
--- a/drivers/media/dvb/siano/sms-cards.h
+++ b/drivers/media/dvb/siano/sms-cards.h
@@ -4,7 +4,7 @@
  *  Copyright (c) 2008 Michael Krufky <mkrufky@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c
index c5f45fed69d..6576fbb40fc 100644
--- a/drivers/media/dvb/siano/smscoreapi.c
+++ b/drivers/media/dvb/siano/smscoreapi.c
@@ -8,7 +8,7 @@
  *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/siano/smscoreapi.h b/drivers/media/dvb/siano/smscoreapi.h
index c1f8f1dccb1..8d973f726fb 100644
--- a/drivers/media/dvb/siano/smscoreapi.h
+++ b/drivers/media/dvb/siano/smscoreapi.h
@@ -6,7 +6,7 @@
  *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index 229274a1411..8d490e133f3 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -6,7 +6,7 @@
  *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c
index c10b1849c6a..87a3c24454b 100644
--- a/drivers/media/dvb/siano/smsusb.c
+++ b/drivers/media/dvb/siano/smsusb.c
@@ -6,7 +6,7 @@
  *  Copyright (c), 2005-2008 Siano Mobile Silicon, Inc.
  *
  *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 3 as
+ *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation;
  *
  *  Software distributed under the License is distributed on an "AS IS"
-- 
GitLab


From f46466e7d6ff4871e5faae32d277175293a34c1f Mon Sep 17 00:00:00 2001
From: Simon Arlott <simon@fire.lp0.eu>
Date: Wed, 3 Sep 2008 16:48:20 -0300
Subject: [PATCH 719/869] V4L/DVB (8726): link tuner before saa7134

If saa7134_init is run before v4l2_i2c_drv_init (tuner), then
saa7134_board_init2 will try to set the tuner type for devices that don't
exist yet.  This moves tuner to before all of the device-specific drivers
so that it's loaded early enough on boot.

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/Makefile | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index bbc6f8b8229..ef7c8d3ffb1 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -20,6 +20,8 @@ ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
   obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
 endif
 
+obj-$(CONFIG_VIDEO_TUNER) += tuner.o
+
 obj-$(CONFIG_VIDEO_BT848) += bt8xx/
 obj-$(CONFIG_VIDEO_IR_I2C)  += ir-kbd-i2c.o
 obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
@@ -85,8 +87,6 @@ obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
 obj-$(CONFIG_VIDEO_DPC) += dpc7146.o
 obj-$(CONFIG_TUNER_3036) += tuner-3036.o
 
-obj-$(CONFIG_VIDEO_TUNER) += tuner.o
-
 obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
 obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
 obj-$(CONFIG_VIDEOBUF_DMA_CONTIG) += videobuf-dma-contig.o
-- 
GitLab


From b54ff9398ac7d38a129167b580383943592b6f08 Mon Sep 17 00:00:00 2001
From: Rene Herman <rene.herman@keyaccess.nl>
Date: Wed, 3 Sep 2008 16:48:21 -0300
Subject: [PATCH 720/869] V4L/DVB (8727): V4L1: make PMS not autoprobe when
 builtin.

The old Mediavision Pro Movie Studio legacy ISA V4L1 driver was found to
hang the boot during Ingo Molnar's testing of randconfig kernels.  Have it
require a "pms.enable=1" kernel parameter to enable the driver when
builtin which avoids such problems.

This is a deprecated and, very likely, unused driver.  Nothing changes
modular behaviour moreover.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/pms.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index 00425d74365..ede522a33d7 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -1019,10 +1019,22 @@ static int init_mediavision(void)
  *	Initialization and module stuff
  */
 
+#ifndef MODULE
+static int enable;
+module_param(enable, int, 0);
+#endif
+
 static int __init init_pms_cards(void)
 {
 	printk(KERN_INFO "Mediavision Pro Movie Studio driver 0.02\n");
 
+#ifndef MODULE
+	if (!enable) {
+		printk(KERN_INFO "Not enabled\n");
+		return -ENODEV;
+	}
+#endif
+
 	data_port = io_port +1;
 
 	if(init_mediavision())
-- 
GitLab


From 4ce0b659689a97bc356e96aeac813cad2d137339 Mon Sep 17 00:00:00 2001
From: Rene Herman <rene.herman@keyaccess.nl>
Date: Wed, 3 Sep 2008 16:48:23 -0300
Subject: [PATCH 721/869] V4L/DVB (8728): 1-make-pms-not-autoprobe-when-builtin
 update

On 10-08-08 23:37, Alan Cox wrote:
>
> Would probably make the printk "pms: not enabled, use pms.enable=1 to
> probe"
>
> So you know
> a) What is wittering about not being probed
> b) How to undo it.
>
> But thats trivia really.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
---
 drivers/media/video/pms.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/video/pms.c b/drivers/media/video/pms.c
index ede522a33d7..7c84f795db5 100644
--- a/drivers/media/video/pms.c
+++ b/drivers/media/video/pms.c
@@ -1030,7 +1030,8 @@ static int __init init_pms_cards(void)
 
 #ifndef MODULE
 	if (!enable) {
-		printk(KERN_INFO "Not enabled\n");
+		printk(KERN_INFO "PMS: not enabled, use pms.enable=1 to "
+				 "probe\n");
 		return -ENODEV;
 	}
 #endif
-- 
GitLab


From 5b5aff83a549c8f1e425e06d46ec951eae950b37 Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Wed, 3 Sep 2008 17:11:52 -0300
Subject: [PATCH 722/869] V4L/DVB (8749): Fix error code, when camera is not
 turned on by sonypi

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/meye.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index 7c8ef6ac6c3..a9ef7802eb5 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -1806,6 +1806,7 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 	memcpy(meye.video_dev, &meye_template, sizeof(meye_template));
 	meye.video_dev->parent = &meye.mchip_dev->dev;
 
+	ret = -EIO;
 	if ((ret = sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERA, 1))) {
 		printk(KERN_ERR "meye: unable to power on the camera\n");
 		printk(KERN_ERR "meye: did you enable the camera in "
@@ -1813,7 +1814,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 		goto outsonypienable;
 	}
 
-	ret = -EIO;
 	if ((ret = pci_enable_device(meye.mchip_dev))) {
 		printk(KERN_ERR "meye: pci_enable_device failed\n");
 		goto outenabledev;
-- 
GitLab


From f3b9f50ef771670b5d94c568241d6766691c6c18 Mon Sep 17 00:00:00 2001
From: Henrik Kretzschmar <henne@nachtwindheim.de>
Date: Wed, 3 Sep 2008 17:11:53 -0300
Subject: [PATCH 723/869] V4L/DVB (8750): V4L: check inval in
 video_register_device_index()

Better check the video_device pointer before using it.

Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/v4l2-dev.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 0320fb84119..155fdec9ac7 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -257,6 +257,9 @@ int video_register_device_index(struct video_device *vfd, int type, int nr,
 	int ret;
 	char *name_base;
 
+	if (vfd == NULL)
+		return -EINVAL;
+
 	switch (type) {
 	case VFL_TYPE_GRABBER:
 		base = MINOR_VFL_TYPE_GRABBER_MIN;
-- 
GitLab


From 980d4f17345fe420fda2a84cd4a28d5d41d73cef Mon Sep 17 00:00:00 2001
From: Mauro Carvalho Chehab <mchehab@infradead.org>
Date: Wed, 3 Sep 2008 17:11:53 -0300
Subject: [PATCH 724/869] V4L/DVB (8751): vivi: Fix some issues at vivi
 register routine

This patch fixes several small issues at vivi register routines:

1) minor and n_devs should be unsigned;
2) n_devs = 0 were not properly handled;
3) if n_devs specify a high number, the driver would just roll back and
won't register any device. The proper behaviour is to keep all succeded
devices registered;
4) both n_devs and minor were using 0 as permissions. Better to have
them with 0444.

With the current patch, if n_devs specify a very large value, it will
register all possible devices. For example, on a machine without any
other V4L drivers loaded, with this patch, we will have something like:

vivi: V4L2 device registered as /dev/video0
vivi: V4L2 device registered as /dev/video1
vivi: V4L2 device registered as /dev/video2
	...
vivi: V4L2 device registered as /dev/video31
video_register_device_index: get_index failed
Video Technology Magazine Virtual Video Capture Board ver 0.5.0 successfully loaded.

5) The number of allocated devices on success is now kept at n_devs:

$ cat /sys/module/vivi/parameters/n_devs
32

Thanks to Henne <henne@nachtwindheim.de> for pointing that there were
some issues at vivi.

Cc: Henne <henne@nachtwindheim.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/vivi.c | 44 +++++++++++++++++++++++++++++++-------
 1 file changed, 36 insertions(+), 8 deletions(-)

diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index 3518af071a2..f55d77db155 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -1104,19 +1104,29 @@ static struct video_device vivi_template = {
 	Initialization and module stuff
    ------------------------------------------------------------------*/
 
+/* This routine allocates from 1 to n_devs virtual drivers.
+
+   The real maximum number of virtual drivers will depend on how many drivers
+   will succeed. This is limited to the maximum number of devices that
+   videodev supports. Since there are 64 minors for video grabbers, this is
+   currently the theoretical maximum limit. However, a further limit does
+   exist at videodev that forbids any driver to register more than 32 video
+   grabbers.
+ */
 static int __init vivi_init(void)
 {
 	int ret = -ENOMEM, i;
 	struct vivi_dev *dev;
 	struct video_device *vfd;
 
+	if (n_devs <= 0)
+		n_devs = 1;
+
 	for (i = 0; i < n_devs; i++) {
 		dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-		if (NULL == dev)
+		if (!dev)
 			break;
 
-		list_add_tail(&dev->vivi_devlist, &vivi_devlist);
-
 		/* init video dma queues */
 		INIT_LIST_HEAD(&dev->vidq.active);
 		init_waitqueue_head(&dev->vidq.wq);
@@ -1126,14 +1136,27 @@ static int __init vivi_init(void)
 		mutex_init(&dev->mutex);
 
 		vfd = video_device_alloc();
-		if (NULL == vfd)
+		if (!vfd) {
+			kfree(dev);
 			break;
+		}
 
 		*vfd = vivi_template;
 
 		ret = video_register_device(vfd, VFL_TYPE_GRABBER, video_nr);
-		if (ret < 0)
+		if (ret < 0) {
+			video_device_release(vfd);
+			kfree(dev);
+
+			/* If some registers succeeded, keep driver */
+			if (i)
+				ret = 0;
+
 			break;
+		}
+
+		/* Now that everything is fine, let's add it to device list */
+		list_add_tail(&dev->vivi_devlist, &vivi_devlist);
 
 		snprintf(vfd->name, sizeof(vfd->name), "%s (%i)",
 			 vivi_template.name, vfd->minor);
@@ -1149,11 +1172,16 @@ static int __init vivi_init(void)
 	if (ret < 0) {
 		vivi_release();
 		printk(KERN_INFO "Error %d while loading vivi driver\n", ret);
-	} else
+	} else {
 		printk(KERN_INFO "Video Technology Magazine Virtual Video "
 			"Capture Board ver %u.%u.%u successfully loaded.\n",
 			(VIVI_VERSION >> 16) & 0xFF, (VIVI_VERSION >> 8) & 0xFF,
 			VIVI_VERSION & 0xFF);
+
+		/* n_devs will reflect the actual number of allocated devices */
+		n_devs = i;
+	}
+
 	return ret;
 }
 
@@ -1169,10 +1197,10 @@ MODULE_DESCRIPTION("Video Technology Magazine Virtual Video Capture Board");
 MODULE_AUTHOR("Mauro Carvalho Chehab, Ted Walther and John Sokol");
 MODULE_LICENSE("Dual BSD/GPL");
 
-module_param(video_nr, int, 0);
+module_param(video_nr, uint, 0444);
 MODULE_PARM_DESC(video_nr, "video iminor start number");
 
-module_param(n_devs, int, 0);
+module_param(n_devs, uint, 0444);
 MODULE_PARM_DESC(n_devs, "number of video devices to create");
 
 module_param_named(debug, vivi_template.debug, int, 0444);
-- 
GitLab


From c6eb8eafdba4ad18b4520a0d28a38bc9e61883ea Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 3 Sep 2008 17:11:54 -0300
Subject: [PATCH 725/869] V4L/DVB (8757): v4l-dvb: fix a bunch of sparse
 warnings

Fixed a lot of sparse warnings: mostly warnings about shadowed variables
and signed/unsigned mismatches.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/saa7146_video.c        |  4 +-
 drivers/media/common/tuners/tuner-simple.c  | 33 +++++-----
 drivers/media/dvb/dvb-core/dmxdev.c         |  1 -
 drivers/media/dvb/dvb-core/dvb_ca_en50221.c |  4 +-
 drivers/media/dvb/dvb-core/dvb_frontend.c   |  8 +--
 drivers/media/dvb/dvb-usb/cxusb.c           |  2 +-
 drivers/media/radio/radio-maxiradio.c       | 26 ++++----
 drivers/media/video/bt8xx/bttv-cards.c      | 70 ++++++++++++---------
 drivers/media/video/bt8xx/bttv-driver.c     |  1 -
 drivers/media/video/bt8xx/bttv-risc.c       |  3 +-
 drivers/media/video/bt8xx/bttvp.h           |  5 ++
 drivers/media/video/btcx-risc.c             |  4 +-
 drivers/media/video/btcx-risc.h             |  2 +-
 drivers/media/video/cpia2/cpia2_v4l.c       |  1 -
 drivers/media/video/cx18/cx18-av-firmware.c | 16 ++---
 drivers/media/video/cx18/cx18-driver.c      |  6 +-
 drivers/media/video/cx18/cx18-queue.c       |  8 +--
 drivers/media/video/gspca/gspca.c           |  2 +-
 drivers/media/video/ks0127.c                | 31 ++++-----
 drivers/media/video/mxb.c                   | 12 ++--
 drivers/media/video/ov511.c                 | 14 ++---
 drivers/media/video/pwc/pwc-ctrl.c          | 18 +++---
 drivers/media/video/usbvideo/ibmcam.c       |  6 +-
 23 files changed, 146 insertions(+), 131 deletions(-)

diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c
index e8bc7abf240..99be9e5c85f 100644
--- a/drivers/media/common/saa7146_video.c
+++ b/drivers/media/common/saa7146_video.c
@@ -1068,7 +1068,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 	{
 		v4l2_std_id *id = arg;
 		int found = 0;
-		int i, err;
+		int i;
 
 		DEB_EE(("VIDIOC_S_STD\n"));
 
@@ -1116,7 +1116,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 	case VIDIOC_OVERLAY:
 	{
 		int on = *(int *)arg;
-		int err = 0;
 
 		DEB_D(("VIDIOC_OVERLAY on:%d\n",on));
 		if (on != 0) {
@@ -1192,7 +1191,6 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 	case VIDIOCGMBUF:
 	{
 		struct video_mbuf *mbuf = arg;
-		struct videobuf_queue *q;
 		int i;
 
 		/* fixme: number of capture buffers and sizes for v4l apps */
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index 597e47f5d69..aa773a658a2 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -253,7 +253,7 @@ static struct tuner_params *simple_tuner_params(struct dvb_frontend *fe,
 
 static int simple_config_lookup(struct dvb_frontend *fe,
 				struct tuner_params *t_params,
-				int *frequency, u8 *config, u8 *cb)
+				unsigned *frequency, u8 *config, u8 *cb)
 {
 	struct tuner_simple_priv *priv = fe->tuner_priv;
 	int i;
@@ -587,45 +587,45 @@ static int simple_set_tv_freq(struct dvb_frontend *fe,
 	priv->last_div = div;
 	if (t_params->has_tda9887) {
 		struct v4l2_priv_tun_config tda9887_cfg;
-		int config = 0;
+		int tda_config = 0;
 		int is_secam_l = (params->std & (V4L2_STD_SECAM_L |
 						 V4L2_STD_SECAM_LC)) &&
 			!(params->std & ~(V4L2_STD_SECAM_L |
 					  V4L2_STD_SECAM_LC));
 
 		tda9887_cfg.tuner = TUNER_TDA9887;
-		tda9887_cfg.priv  = &config;
+		tda9887_cfg.priv  = &tda_config;
 
 		if (params->std == V4L2_STD_SECAM_LC) {
 			if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc)
-				config |= TDA9887_PORT1_ACTIVE;
+				tda_config |= TDA9887_PORT1_ACTIVE;
 			if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc)
-				config |= TDA9887_PORT2_ACTIVE;
+				tda_config |= TDA9887_PORT2_ACTIVE;
 		} else {
 			if (t_params->port1_active)
-				config |= TDA9887_PORT1_ACTIVE;
+				tda_config |= TDA9887_PORT1_ACTIVE;
 			if (t_params->port2_active)
-				config |= TDA9887_PORT2_ACTIVE;
+				tda_config |= TDA9887_PORT2_ACTIVE;
 		}
 		if (t_params->intercarrier_mode)
-			config |= TDA9887_INTERCARRIER;
+			tda_config |= TDA9887_INTERCARRIER;
 		if (is_secam_l) {
 			if (i == 0 && t_params->default_top_secam_low)
-				config |= TDA9887_TOP(t_params->default_top_secam_low);
+				tda_config |= TDA9887_TOP(t_params->default_top_secam_low);
 			else if (i == 1 && t_params->default_top_secam_mid)
-				config |= TDA9887_TOP(t_params->default_top_secam_mid);
+				tda_config |= TDA9887_TOP(t_params->default_top_secam_mid);
 			else if (t_params->default_top_secam_high)
-				config |= TDA9887_TOP(t_params->default_top_secam_high);
+				tda_config |= TDA9887_TOP(t_params->default_top_secam_high);
 		} else {
 			if (i == 0 && t_params->default_top_low)
-				config |= TDA9887_TOP(t_params->default_top_low);
+				tda_config |= TDA9887_TOP(t_params->default_top_low);
 			else if (i == 1 && t_params->default_top_mid)
-				config |= TDA9887_TOP(t_params->default_top_mid);
+				tda_config |= TDA9887_TOP(t_params->default_top_mid);
 			else if (t_params->default_top_high)
-				config |= TDA9887_TOP(t_params->default_top_high);
+				tda_config |= TDA9887_TOP(t_params->default_top_high);
 		}
 		if (t_params->default_pll_gating_18)
-			config |= TDA9887_GATING_18;
+			tda_config |= TDA9887_GATING_18;
 		i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG,
 				    &tda9887_cfg);
 	}
@@ -813,7 +813,8 @@ static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf,
 	static struct tuner_params *t_params;
 	u8 config, cb;
 	u32 div;
-	int ret, frequency = params->frequency / 62500;
+	int ret;
+	unsigned frequency = params->frequency / 62500;
 
 	t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL);
 	ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb);
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 1cf9fcb6f51..069d847ba88 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -641,7 +641,6 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter)
 		struct timespec timeout = { 0 };
 		struct dmx_pes_filter_params *para = &filter->params.pes;
 		dmx_output_t otype;
-		int ret;
 		int ts_type;
 		enum dmx_ts_pes ts_pes;
 		struct dmx_ts_feed **tsfeed = &filter->feed.ts;
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index 8e5dd7b1f03..98ee16773ff 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -1032,7 +1032,7 @@ static int dvb_ca_en50221_thread(void *data)
 					/* we need this extra check for annoying interfaces like the budget-av */
 					if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
 					    (ca->pub->poll_slot_status)) {
-						int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+						status = ca->pub->poll_slot_status(ca->pub, slot, 0);
 						if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
 							ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
 							dvb_ca_en50221_thread_update_delay(ca);
@@ -1089,7 +1089,7 @@ static int dvb_ca_en50221_thread(void *data)
 					/* we need this extra check for annoying interfaces like the budget-av */
 					if ((!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) &&
 					    (ca->pub->poll_slot_status)) {
-						int status = ca->pub->poll_slot_status(ca->pub, slot, 0);
+						status = ca->pub->poll_slot_status(ca->pub, slot, 0);
 						if (!(status & DVB_CA_EN50221_POLL_CAM_PRESENT)) {
 							ca->slot_info[slot].slot_state = DVB_CA_SLOTSTATE_NONE;
 							dvb_ca_en50221_thread_update_delay(ca);
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index 8cbdb218952..3526e3ee948 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -889,13 +889,13 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
 			 * initialization, so parg is 8 bits and does not
 			 * include the initialization or start bit
 			 */
-			unsigned long cmd = ((unsigned long) parg) << 1;
+			unsigned long swcmd = ((unsigned long) parg) << 1;
 			struct timeval nexttime;
 			struct timeval tv[10];
 			int i;
 			u8 last = 1;
 			if (dvb_frontend_debug)
-				printk("%s switch command: 0x%04lx\n", __func__, cmd);
+				printk("%s switch command: 0x%04lx\n", __func__, swcmd);
 			do_gettimeofday(&nexttime);
 			if (dvb_frontend_debug)
 				memcpy(&tv[0], &nexttime, sizeof(struct timeval));
@@ -908,12 +908,12 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file,
 			for (i = 0; i < 9; i++) {
 				if (dvb_frontend_debug)
 					do_gettimeofday(&tv[i + 1]);
-				if ((cmd & 0x01) != last) {
+				if ((swcmd & 0x01) != last) {
 					/* set voltage to (last ? 13V : 18V) */
 					fe->ops.set_voltage(fe, (last) ? SEC_VOLTAGE_13 : SEC_VOLTAGE_18);
 					last = (last) ? 0 : 1;
 				}
-				cmd = cmd >> 1;
+				swcmd = swcmd >> 1;
 				if (i != 8)
 					dvb_frontend_sleep_until(&nexttime, 8000);
 			}
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index aaa0b6f0b52..563400277a4 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -210,7 +210,7 @@ static int cxusb_aver_power_ctrl(struct dvb_usb_device *d, int onoff)
 	if (d->state == DVB_USB_STATE_INIT &&
 	    usb_set_interface(d->udev, 0, 0) < 0)
 		err("set interface failed");
-	do; while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
+	do {} while (!(ret = cxusb_ctrl_msg(d, CMD_POWER_ON, NULL, 0, NULL, 0)) &&
 		   !(ret = cxusb_ctrl_msg(d, 0x15, NULL, 0, NULL, 0)) &&
 		   !(ret = cxusb_ctrl_msg(d, 0x17, NULL, 0, NULL, 0)) && 0);
 	if (!ret) {
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index 43c75497dc4..e210da16156 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -156,28 +156,28 @@ static void set_freq(__u16 io, __u32 freq)
 {
 	unsigned long int si;
 	int bl;
-	int data = FREQ2BITS(freq);
+	int val = FREQ2BITS(freq);
 
 	/* TEA5757 shift register bits (see pdf) */
 
-	outbit(0,io); // 24  search
-	outbit(1,io); // 23  search up/down
+	outbit(0, io); /* 24  search */
+	outbit(1, io); /* 23  search up/down */
 
-	outbit(0,io); // 22  stereo/mono
+	outbit(0, io); /* 22  stereo/mono */
 
-	outbit(0,io); // 21  band
-	outbit(0,io); // 20  band (only 00=FM works I think)
+	outbit(0, io); /* 21  band */
+	outbit(0, io); /* 20  band (only 00=FM works I think) */
 
-	outbit(0,io); // 19  port ?
-	outbit(0,io); // 18  port ?
+	outbit(0, io); /* 19  port ? */
+	outbit(0, io); /* 18  port ? */
 
-	outbit(0,io); // 17  search level
-	outbit(0,io); // 16  search level
+	outbit(0, io); /* 17  search level */
+	outbit(0, io); /* 16  search level */
 
 	si = 0x8000;
-	for (bl = 1; bl <= 16 ; bl++) {
-		outbit(data & si,io);
-		si >>=1;
+	for (bl = 1; bl <= 16; bl++) {
+		outbit(val & si, io);
+		si >>= 1;
 	}
 
 	dprintk(1, "Radio freq set to %d.%02d MHz\n",
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 1c56ae92ce7..9001de23332 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -3144,8 +3144,9 @@ static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
 
 static void flyvideo_gpio(struct bttv *btv)
 {
-	int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821;
-	int tuner=UNSET,ttype;
+	int gpio, has_remote, has_radio, is_capture_only;
+	int is_lr90, has_tda9820_tda9821;
+	int tuner_type = UNSET, ttype;
 
 	gpio_inout(0xffffff, 0);
 	udelay(8);  /* without this we would see the 0x1800 mask */
@@ -3163,20 +3164,26 @@ static void flyvideo_gpio(struct bttv *btv)
 	 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
 	 * Note: Some bits are Audio_Mask !
 	 */
-	ttype=(gpio&0x0f0000)>>16;
-	switch(ttype) {
-	case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
+	ttype = (gpio & 0x0f0000) >> 16;
+	switch (ttype) {
+	case 0x0:
+		tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
 		break;
-	case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
+	case 0x2:
+		tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
 		break;
-	case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
+	case 0x4:
+		tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
 		break;
-	case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
+	case 0x6:
+		tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
 		break;
-		case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
+	case 0xC:
+		tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
 		break;
 	default:
 		printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
+		break;
 	}
 
 	has_remote          =   gpio & 0x800000;
@@ -3189,23 +3196,26 @@ static void flyvideo_gpio(struct bttv *btv)
 	/*
 	 * gpio & 0x001000    output bit for audio routing */
 
-	if(is_capture_only)
-		tuner = TUNER_ABSENT; /* No tuner present */
+	if (is_capture_only)
+		tuner_type = TUNER_ABSENT; /* No tuner present */
 
 	printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
-	       btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
+		btv->c.nr, has_radio ? "yes" : "no ",
+		has_remote ? "yes" : "no ", tuner_type, gpio);
 	printk(KERN_INFO "bttv%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
-		btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
-		is_capture_only?"yes":"no ");
+		btv->c.nr, is_lr90 ? "yes" : "no ",
+		has_tda9820_tda9821 ? "yes" : "no ",
+		is_capture_only ? "yes" : "no ");
 
-	if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */
-		btv->tuner_type = tuner;
+	if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
+		btv->tuner_type = tuner_type;
 	btv->has_radio = has_radio;
 
 	/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
 	 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
 	 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
-	if(has_tda9820_tda9821) btv->audio_mode_gpio = lt9415_audio;
+	if (has_tda9820_tda9821)
+		btv->audio_mode_gpio = lt9415_audio;
 	/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
 }
 
@@ -3962,7 +3972,7 @@ static int tuner_1_table[] = {
 
 static void __devinit avermedia_eeprom(struct bttv *btv)
 {
-	int tuner_make,tuner_tv_fm,tuner_format,tuner=0;
+	int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
 
 	tuner_make      = (eeprom_data[0x41] & 0x7);
 	tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
@@ -3970,24 +3980,24 @@ static void __devinit avermedia_eeprom(struct bttv *btv)
 	btv->has_remote = (eeprom_data[0x42] & 0x01);
 
 	if (tuner_make == 0 || tuner_make == 2)
-		if(tuner_format <=0x0a)
-			tuner = tuner_0_table[tuner_format];
+		if (tuner_format <= 0x0a)
+			tuner_type = tuner_0_table[tuner_format];
 	if (tuner_make == 1)
-		if(tuner_format <=9)
-			tuner = tuner_1_table[tuner_format];
+		if (tuner_format <= 9)
+			tuner_type = tuner_1_table[tuner_format];
 
 	if (tuner_make == 4)
-		if(tuner_format == 0x09)
-			tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
+		if (tuner_format == 0x09)
+			tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
 
 	printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
-		btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
-	if(tuner) {
-		btv->tuner_type=tuner;
-		printk("%d",tuner);
+		btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
+	if (tuner_type) {
+		btv->tuner_type = tuner_type;
+		printk(KERN_CONT "%d", tuner_type);
 	} else
-		printk("Unknown type");
-	printk(" radio:%s remote control:%s\n",
+		printk(KERN_CONT "Unknown type");
+	printk(KERN_CONT " radio:%s remote control:%s\n",
 	       tuner_tv_fm     ? "yes" : "no",
 	       btv->has_remote ? "yes" : "no");
 }
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 85bf31ab878..6ae4cc860ef 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -96,7 +96,6 @@ static unsigned int irq_iswitch;
 static unsigned int uv_ratio    = 50;
 static unsigned int full_luma_range;
 static unsigned int coring;
-extern int no_overlay;
 
 /* API features (turn on/off stuff for testing) */
 static unsigned int v4l2        = 1;
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index 649682aac1a..5b1b8e4c78b 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -244,7 +244,8 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc,
 		  const struct bttv_format *fmt, struct bttv_overlay *ov,
 		  int skip_even, int skip_odd)
 {
-	int dwords,rc,line,maxy,start,end,skip,nskips;
+	int dwords, rc, line, maxy, start, end;
+	unsigned skip, nskips;
 	struct btcx_skiplist *skips;
 	__le32 *rp;
 	u32 ri,ra;
diff --git a/drivers/media/video/bt8xx/bttvp.h b/drivers/media/video/bt8xx/bttvp.h
index 08ef54a22c9..b4d940b2e44 100644
--- a/drivers/media/video/bt8xx/bttvp.h
+++ b/drivers/media/video/bt8xx/bttvp.h
@@ -266,6 +266,11 @@ extern struct bus_type bttv_sub_bus_type;
 int bttv_sub_add_device(struct bttv_core *core, char *name);
 int bttv_sub_del_devices(struct bttv_core *core);
 
+/* ---------------------------------------------------------- */
+/* bttv-cards.c                                               */
+
+extern int no_overlay;
+
 /* ---------------------------------------------------------- */
 /* bttv-driver.c                                              */
 
diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c
index f42701f82e7..3324ab38f58 100644
--- a/drivers/media/video/btcx-risc.c
+++ b/drivers/media/video/btcx-risc.c
@@ -184,12 +184,12 @@ btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips)
 }
 
 void
-btcx_calc_skips(int line, int width, unsigned int *maxy,
+btcx_calc_skips(int line, int width, int *maxy,
 		struct btcx_skiplist *skips, unsigned int *nskips,
 		const struct v4l2_clip *clips, unsigned int nclips)
 {
 	unsigned int clip,skip;
-	int end,maxline;
+	int end, maxline;
 
 	skip=0;
 	maxline = 9999;
diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h
index 861bc811282..f8bc6e8e7b5 100644
--- a/drivers/media/video/btcx-risc.h
+++ b/drivers/media/video/btcx-risc.h
@@ -23,7 +23,7 @@ int btcx_screen_clips(int swidth, int sheight, struct v4l2_rect *win,
 int btcx_align(struct v4l2_rect *win, struct v4l2_clip *clips,
 	       unsigned int n, int mask);
 void btcx_sort_clips(struct v4l2_clip *clips, unsigned int nclips);
-void btcx_calc_skips(int line, int width, unsigned int *maxy,
+void btcx_calc_skips(int line, int width, int *maxy,
 		     struct btcx_skiplist *skips, unsigned int *nskips,
 		     const struct v4l2_clip *clips, unsigned int nclips);
 
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index 515c8b57a60..c8257060642 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -1024,7 +1024,6 @@ static int ioctl_queryctrl(void *arg,struct camera_data *cam)
 		if(cam->params.pnp_id.device_type == DEVICE_STV_672 &&
 		   cam->params.version.sensor_flags==CPIA2_VP_SENSOR_FLAGS_500){
 			// Maximum 15fps
-			int i;
 			for(i=0; i<c->maximum; ++i) {
 				if(framerate_controls[i].value ==
 				   CPIA2_VP_FRAMERATE_15) {
diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c
index 834b9248242..e996a4e3123 100644
--- a/drivers/media/video/cx18/cx18-av-firmware.c
+++ b/drivers/media/video/cx18/cx18-av-firmware.c
@@ -32,7 +32,7 @@ int cx18_av_loadfw(struct cx18 *cx)
 	u32 v;
 	const u8 *ptr;
 	int i;
-	int retries = 0;
+	int retries1 = 0;
 
 	if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) {
 		CX18_ERR("unable to open firmware %s\n", FWFILE);
@@ -41,7 +41,7 @@ int cx18_av_loadfw(struct cx18 *cx)
 
 	/* The firmware load often has byte errors, so allow for several
 	   retries, both at byte level and at the firmware load level. */
-	while (retries < 5) {
+	while (retries1 < 5) {
 		cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
 		cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6);
 
@@ -57,9 +57,9 @@ int cx18_av_loadfw(struct cx18 *cx)
 		for (i = 0; i < size; i++) {
 			u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
 			u32 value = 0;
-			int retries;
+			int retries2;
 
-			for (retries = 0; retries < 5; retries++) {
+			for (retries2 = 0; retries2 < 5; retries2++) {
 				cx18_av_write4(cx, CXADEC_DL_CTL, dl_control);
 				udelay(10);
 				value = cx18_av_read4(cx, CXADEC_DL_CTL);
@@ -69,18 +69,18 @@ int cx18_av_loadfw(struct cx18 *cx)
 				   the address.  We can only write the lower
 				   address byte of the address. */
 				if ((value & 0x3F00) != (dl_control & 0x3F00)) {
-					retries = 5;
+					retries2 = 5;
 					break;
 				}
 			}
-			if (retries >= 5)
+			if (retries2 >= 5)
 				break;
 		}
 		if (i == size)
 			break;
-		retries++;
+		retries1++;
 	}
-	if (retries >= 5) {
+	if (retries1 >= 5) {
 		CX18_ERR("unable to load firmware %s\n", FWFILE);
 		release_firmware(fw);
 		return -EIO;
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 22434aadde3..bd18afebbf8 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -74,9 +74,9 @@ static int radio[CX18_MAX_CARDS] = { -1, -1, -1, -1, -1, -1, -1, -1,
 				     -1, -1, -1, -1, -1, -1, -1, -1,
 				     -1, -1, -1, -1, -1, -1, -1, -1 };
 
-static int cardtype_c = 1;
-static int tuner_c = 1;
-static int radio_c = 1;
+static unsigned cardtype_c = 1;
+static unsigned tuner_c = 1;
+static unsigned radio_c = 1;
 static char pal[] = "--";
 static char secam[] = "--";
 static char ntsc[] = "-";
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index 8a4dd821fd9..a31da49f912 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -217,10 +217,10 @@ int cx18_stream_alloc(struct cx18_stream *s)
 		s->name, s->buffers, s->buf_size,
 		s->buffers * s->buf_size / 1024);
 
-	if (((char *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
-				(char *)cx->scb) > SCB_RESERVED_SIZE) {
-		unsigned bufsz = (((char *)cx->scb) + SCB_RESERVED_SIZE -
-					((char *)cx->scb->cpu_mdl));
+	if (((char __iomem *)&cx->scb->cpu_mdl[cx->mdl_offset + s->buffers] -
+				(char __iomem *)cx->scb) > SCB_RESERVED_SIZE) {
+		unsigned bufsz = (((char __iomem *)cx->scb) + SCB_RESERVED_SIZE -
+					((char __iomem *)cx->scb->cpu_mdl));
 
 		CX18_ERR("Too many buffers, cannot fit in SCB area\n");
 		CX18_ERR("Max buffers = %zd\n",
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 3461bc9e473..0b292ca0c08 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1401,7 +1401,7 @@ static int vidioc_dqbuf(struct file *file, void *priv,
 	i = ret;				/* frame index */
 	frame = &gspca_dev->frame[i];
 	if (gspca_dev->memory == V4L2_MEMORY_USERPTR) {
-		if (copy_to_user((__u8 *) frame->v4l2_buf.m.userptr,
+		if (copy_to_user((__u8 __user *) frame->v4l2_buf.m.userptr,
 				 frame->data,
 				 frame->v4l2_buf.bytesused)) {
 			PDEBUG(D_ERR|D_STREAM,
diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c
index 4895540be19..2fd4b4a44aa 100644
--- a/drivers/media/video/ks0127.c
+++ b/drivers/media/video/ks0127.c
@@ -679,26 +679,27 @@ static int ks0127_command(struct i2c_client *client,
 
 	case DECODER_ENABLE_OUTPUT:
 	{
+		int enable;
 
-		int *iarg = arg;
-		int enable = (*iarg != 0);
-			if (enable) {
-				dprintk("ks0127: command "
+		iarg = arg;
+		enable = (*iarg != 0);
+		if (enable) {
+			dprintk("ks0127: command "
 					"DECODER_ENABLE_OUTPUT on "
 					"(%d)\n", enable);
-				/* All output pins on */
-				ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30);
-				/* Obey the OEN pin */
-				ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00);
-			} else {
-				dprintk("ks0127: command "
+			/* All output pins on */
+			ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x30);
+			/* Obey the OEN pin */
+			ks0127_and_or(ks, KS_CDEM, 0x7f, 0x00);
+		} else {
+			dprintk("ks0127: command "
 					"DECODER_ENABLE_OUTPUT off "
 					"(%d)\n", enable);
-				/* Video output pins off */
-				ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00);
-				/* Ignore the OEN pin */
-				ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80);
-			}
+			/* Video output pins off */
+			ks0127_and_or(ks, KS_OFMTA, 0xcf, 0x00);
+			/* Ignore the OEN pin */
+			ks0127_and_or(ks, KS_CDEM, 0x7f, 0x80);
+		}
 	}
 		break;
 
diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c
index f68e91fbe7f..8ef578caba3 100644
--- a/drivers/media/video/mxb.c
+++ b/drivers/media/video/mxb.c
@@ -931,27 +931,29 @@ static int mxb_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg)
 	return 0;
 }
 
-static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std)
+static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard)
 {
-	struct mxb* mxb = (struct mxb*)dev->ext_priv;
+	struct mxb *mxb = (struct mxb *)dev->ext_priv;
 	int zero = 0;
 	int one = 1;
 
-	if(V4L2_STD_PAL_I == std->id ) {
+	if (V4L2_STD_PAL_I == standard->id) {
 		v4l2_std_id std = V4L2_STD_PAL_I;
+
 		DEB_D(("VIDIOC_S_STD: setting mxb for PAL_I.\n"));
 		/* set the 7146 gpio register -- I don't know what this does exactly */
 		saa7146_write(dev, GPIO_CTRL, 0x00404050);
 		/* unset the 7111 gpio register -- I don't know what this does exactly */
-		mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &zero);
+		mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &zero);
 		mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
 	} else {
 		v4l2_std_id std = V4L2_STD_PAL_BG;
+
 		DEB_D(("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM.\n"));
 		/* set the 7146 gpio register -- I don't know what this does exactly */
 		saa7146_write(dev, GPIO_CTRL, 0x00404050);
 		/* set the 7111 gpio register -- I don't know what this does exactly */
-		mxb->saa7111a->driver->command(mxb->saa7111a,DECODER_SET_GPIO, &one);
+		mxb->saa7111a->driver->command(mxb->saa7111a, DECODER_SET_GPIO, &one);
 		mxb->tuner->driver->command(mxb->tuner, VIDIOC_S_STD, &std);
 	}
 	return 0;
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 9edaca4371d..3d3c48db45d 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -626,9 +626,9 @@ ov511_i2c_write_internal(struct usb_ov511 *ov,
 			break;
 
 		/* Retry until idle */
-		do
+		do {
 			rc = reg_r(ov, R511_I2C_CTL);
-		while (rc > 0 && ((rc&1) == 0));
+		} while (rc > 0 && ((rc&1) == 0));
 		if (rc < 0)
 			break;
 
@@ -703,9 +703,9 @@ ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg)
 			return rc;
 
 		/* Retry until idle */
-		do
-			 rc = reg_r(ov, R511_I2C_CTL);
-		while (rc > 0 && ((rc&1) == 0));
+		do {
+			rc = reg_r(ov, R511_I2C_CTL);
+		} while (rc > 0 && ((rc & 1) == 0));
 		if (rc < 0)
 			return rc;
 
@@ -729,9 +729,9 @@ ov511_i2c_read_internal(struct usb_ov511 *ov, unsigned char reg)
 			return rc;
 
 		/* Retry until idle */
-		do
+		do {
 			rc = reg_r(ov, R511_I2C_CTL);
-		while (rc > 0 && ((rc&1) == 0));
+		} while (rc > 0 && ((rc&1) == 0));
 		if (rc < 0)
 			return rc;
 
diff --git a/drivers/media/video/pwc/pwc-ctrl.c b/drivers/media/video/pwc/pwc-ctrl.c
index 1cccd5c7704..dbc56074255 100644
--- a/drivers/media/video/pwc/pwc-ctrl.c
+++ b/drivers/media/video/pwc/pwc-ctrl.c
@@ -1635,15 +1635,15 @@ int pwc_ioctl(struct pwc_device *pdev, unsigned int cmd, void *arg)
 
 	case VIDIOCPWCGVIDCMD:
 	{
-		ARG_DEF(struct pwc_video_command, cmd);
-
-		ARGR(cmd).type = pdev->type;
-		ARGR(cmd).release = pdev->release;
-		ARGR(cmd).command_len = pdev->cmd_len;
-		memcpy(&ARGR(cmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
-		ARGR(cmd).bandlength = pdev->vbandlength;
-		ARGR(cmd).frame_size = pdev->frame_size;
-		ARG_OUT(cmd)
+		ARG_DEF(struct pwc_video_command, vcmd);
+
+		ARGR(vcmd).type = pdev->type;
+		ARGR(vcmd).release = pdev->release;
+		ARGR(vcmd).command_len = pdev->cmd_len;
+		memcpy(&ARGR(vcmd).command_buf, pdev->cmd_buf, pdev->cmd_len);
+		ARGR(vcmd).bandlength = pdev->vbandlength;
+		ARGR(vcmd).frame_size = pdev->frame_size;
+		ARG_OUT(vcmd)
 		break;
 	}
 	/*
diff --git a/drivers/media/video/usbvideo/ibmcam.c b/drivers/media/video/usbvideo/ibmcam.c
index 59166b76010..cc27efe121d 100644
--- a/drivers/media/video/usbvideo/ibmcam.c
+++ b/drivers/media/video/usbvideo/ibmcam.c
@@ -736,12 +736,12 @@ static enum ParseState ibmcam_model2_320x240_parse_lines(
 		 * make black color and quit the horizontal scanning loop.
 		 */
 		if (((frame->curline + 2) >= scanHeight) || (i >= scanLength)) {
-			const int j = i * V4L_BYTES_PER_PIXEL;
+			const int offset = i * V4L_BYTES_PER_PIXEL;
 #if USES_IBMCAM_PUTPIXEL
 			/* Refresh 'f' because we don't use it much with PUTPIXEL */
-			f = frame->data + (v4l_linesize * frame->curline) + j;
+			f = frame->data + (v4l_linesize * frame->curline) + offset;
 #endif
-			memset(f, 0, v4l_linesize - j);
+			memset(f, 0, v4l_linesize - offset);
 			break;
 		}
 
-- 
GitLab


From 6c9de52884aeafb05a935467c3a2c05a2d445ab7 Mon Sep 17 00:00:00 2001
From: Andy Walls <awalls@radix.net>
Date: Wed, 3 Sep 2008 17:11:54 -0300
Subject: [PATCH 726/869] V4L/DVB (8769): cx18: Simplify queue flush logic to
 prevent oops in cx18_flush_queues()

cx18: Simplify queue flush logic to prevent oops in cx18_flush_queues().
If accounting of a queue is in error, logic borrowed from ivtv will cause
an oops when flushing the queues for a stream.  This change greatly
simplifies the queue flush logic, and sets the queue back to sane
defaults on a flush.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/cx18/cx18-queue.c | 98 ++++-----------------------
 1 file changed, 15 insertions(+), 83 deletions(-)

diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index a31da49f912..dbe792ac300 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -110,99 +110,31 @@ struct cx18_buffer *cx18_queue_get_buf_irq(struct cx18_stream *s, u32 id,
 	return NULL;
 }
 
-static void cx18_queue_move_buf(struct cx18_stream *s, struct cx18_queue *from,
-		struct cx18_queue *to, int clear, int full)
-{
-	struct cx18_buffer *buf =
-		list_entry(from->list.next, struct cx18_buffer, list);
-
-	list_move_tail(from->list.next, &to->list);
-	from->buffers--;
-	from->length -= s->buf_size;
-	from->bytesused -= buf->bytesused - buf->readpos;
-	/* special handling for q_free */
-	if (clear)
-		buf->bytesused = buf->readpos = buf->b_flags = 0;
-	else if (full) {
-		/* special handling for stolen buffers, assume
-		   all bytes are used. */
-		buf->bytesused = s->buf_size;
-		buf->readpos = buf->b_flags = 0;
-	}
-	to->buffers++;
-	to->length += s->buf_size;
-	to->bytesused += buf->bytesused - buf->readpos;
-}
-
-/* Move 'needed_bytes' worth of buffers from queue 'from' into queue 'to'.
-   If 'needed_bytes' == 0, then move all buffers from 'from' into 'to'.
-   If 'steal' != NULL, then buffers may also taken from that queue if
-   needed.
-
-   The buffer is automatically cleared if it goes to the free queue. It is
-   also cleared if buffers need to be taken from the 'steal' queue and
-   the 'from' queue is the free queue.
-
-   When 'from' is q_free, then needed_bytes is compared to the total
-   available buffer length, otherwise needed_bytes is compared to the
-   bytesused value. For the 'steal' queue the total available buffer
-   length is always used.
-
-   -ENOMEM is returned if the buffers could not be obtained, 0 if all
-   buffers where obtained from the 'from' list and if non-zero then
-   the number of stolen buffers is returned. */
-static int cx18_queue_move(struct cx18_stream *s, struct cx18_queue *from,
-			   struct cx18_queue *steal, struct cx18_queue *to,
-			   int needed_bytes)
+/* Move all buffers of a queue to q_free, while flushing the buffers */
+static void cx18_queue_flush(struct cx18_stream *s, struct cx18_queue *q)
 {
 	unsigned long flags;
-	int rc = 0;
-	int from_free = from == &s->q_free;
-	int to_free = to == &s->q_free;
-	int bytes_available;
-
-	spin_lock_irqsave(&s->qlock, flags);
-	if (needed_bytes == 0) {
-		from_free = 1;
-		needed_bytes = from->length;
-	}
-
-	bytes_available = from_free ? from->length : from->bytesused;
-	bytes_available += steal ? steal->length : 0;
+	struct cx18_buffer *buf;
 
-	if (bytes_available < needed_bytes) {
-		spin_unlock_irqrestore(&s->qlock, flags);
-		return -ENOMEM;
-	}
-	if (from_free) {
-		u32 old_length = to->length;
+	if (q == &s->q_free)
+		return;
 
-		while (to->length - old_length < needed_bytes) {
-			if (list_empty(&from->list))
-				from = steal;
-			if (from == steal)
-				rc++; 	/* keep track of 'stolen' buffers */
-			cx18_queue_move_buf(s, from, to, 1, 0);
-		}
-	} else {
-		u32 old_bytesused = to->bytesused;
-
-		while (to->bytesused - old_bytesused < needed_bytes) {
-			if (list_empty(&from->list))
-				from = steal;
-			if (from == steal)
-				rc++; 	/* keep track of 'stolen' buffers */
-			cx18_queue_move_buf(s, from, to, to_free, rc);
-		}
+	spin_lock_irqsave(&s->qlock, flags);
+	while (!list_empty(&q->list)) {
+		buf = list_entry(q->list.next, struct cx18_buffer, list);
+		list_move_tail(q->list.next, &s->q_free.list);
+		buf->bytesused = buf->readpos = buf->b_flags = 0;
+		s->q_free.buffers++;
+		s->q_free.length += s->buf_size;
 	}
+	cx18_queue_init(q);
 	spin_unlock_irqrestore(&s->qlock, flags);
-	return rc;
 }
 
 void cx18_flush_queues(struct cx18_stream *s)
 {
-	cx18_queue_move(s, &s->q_io, NULL, &s->q_free, 0);
-	cx18_queue_move(s, &s->q_full, NULL, &s->q_free, 0);
+	cx18_queue_flush(s, &s->q_io);
+	cx18_queue_flush(s, &s->q_full);
 }
 
 int cx18_stream_alloc(struct cx18_stream *s)
-- 
GitLab


From cba99ae81901fe61ac4b0d65c697474af29dc4ea Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 3 Sep 2008 17:11:58 -0300
Subject: [PATCH 727/869] V4L/DVB (8778): radio: fix incorrect
 video_register_device result check

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/radio/dsbr100.c          | 2 +-
 drivers/media/radio/radio-aimslab.c    | 3 +--
 drivers/media/radio/radio-aztech.c     | 3 +--
 drivers/media/radio/radio-cadet.c      | 2 +-
 drivers/media/radio/radio-gemtek-pci.c | 2 +-
 drivers/media/radio/radio-gemtek.c     | 3 +--
 drivers/media/radio/radio-maestro.c    | 3 +--
 drivers/media/radio/radio-maxiradio.c  | 2 +-
 drivers/media/radio/radio-rtrack2.c    | 3 +--
 drivers/media/radio/radio-sf16fmi.c    | 2 +-
 drivers/media/radio/radio-si470x.c     | 4 ++--
 drivers/media/radio/radio-terratec.c   | 3 +--
 drivers/media/radio/radio-trust.c      | 3 +--
 drivers/media/radio/radio-zoltrix.c    | 3 +--
 14 files changed, 15 insertions(+), 23 deletions(-)

diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 1ed88f3abe6..70c65a74592 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -493,7 +493,7 @@ static int usb_dsbr100_probe(struct usb_interface *intf,
 	radio->usbdev = interface_to_usbdev(intf);
 	radio->curfreq = FREQ_MIN*FREQ_MUL;
 	video_set_drvdata(radio->videodev, radio);
-	if (video_register_device(radio->videodev, VFL_TYPE_RADIO,radio_nr)) {
+	if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		warn("Could not register video device");
 		video_device_release(radio->videodev);
 		kfree(radio->transfer_buffer);
diff --git a/drivers/media/radio/radio-aimslab.c b/drivers/media/radio/radio-aimslab.c
index eba9209b302..1f064f4b32d 100644
--- a/drivers/media/radio/radio-aimslab.c
+++ b/drivers/media/radio/radio-aimslab.c
@@ -426,8 +426,7 @@ static int __init rtrack_init(void)
 
 	rtrack_radio.priv=&rtrack_unit;
 
-	if(video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-	{
+	if (video_register_device(&rtrack_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-aztech.c b/drivers/media/radio/radio-aztech.c
index 3fe5504428c..628c689e3ff 100644
--- a/drivers/media/radio/radio-aztech.c
+++ b/drivers/media/radio/radio-aztech.c
@@ -394,8 +394,7 @@ static int __init aztech_init(void)
 	mutex_init(&lock);
 	aztech_radio.priv=&aztech_unit;
 
-	if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-	{
+	if (video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io,2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index 6166e726ed7..04c3698d32e 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -682,7 +682,7 @@ static int __init cadet_init(void)
 	}
 	if (!request_region(io,2,"cadet"))
 		goto fail;
-	if(video_register_device(&cadet_radio,VFL_TYPE_RADIO,radio_nr)==-1) {
+	if (video_register_device(&cadet_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io,2);
 		goto fail;
 	}
diff --git a/drivers/media/radio/radio-gemtek-pci.c b/drivers/media/radio/radio-gemtek-pci.c
index 36e754e3ffb..5cd7f032298 100644
--- a/drivers/media/radio/radio-gemtek-pci.c
+++ b/drivers/media/radio/radio-gemtek-pci.c
@@ -425,7 +425,7 @@ static int __devinit gemtek_pci_probe( struct pci_dev *pci_dev, const struct pci
 	}
 	*devradio = vdev_template;
 
-	if ( video_register_device( devradio, VFL_TYPE_RADIO , nr_radio) == -1 ) {
+	if (video_register_device(devradio, VFL_TYPE_RADIO, nr_radio) < 0) {
 		kfree( devradio );
 		goto err_video;
 	}
diff --git a/drivers/media/radio/radio-gemtek.c b/drivers/media/radio/radio-gemtek.c
index 2b1a6221de6..0a0f956bb30 100644
--- a/drivers/media/radio/radio-gemtek.c
+++ b/drivers/media/radio/radio-gemtek.c
@@ -612,8 +612,7 @@ static int __init gemtek_init(void)
 
 	gemtek_radio.priv = &gemtek_unit;
 
-	if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO,
-		radio_nr) == -1) {
+	if (video_register_device(&gemtek_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 1);
 		return -EBUSY;
 	}
diff --git a/drivers/media/radio/radio-maestro.c b/drivers/media/radio/radio-maestro.c
index 0ada1c697e8..9ef0a763eeb 100644
--- a/drivers/media/radio/radio-maestro.c
+++ b/drivers/media/radio/radio-maestro.c
@@ -409,8 +409,7 @@ static int __devinit maestro_probe(struct pci_dev *pdev,
 	video_set_drvdata(maestro_radio_inst, radio_unit);
 	pci_set_drvdata(pdev, maestro_radio_inst);
 
-	retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO,
-		radio_nr);
+	retval = video_register_device(maestro_radio_inst, VFL_TYPE_RADIO, radio_nr);
 	if (retval) {
 		printk(KERN_ERR "can't register video device!\n");
 		goto errfr1;
diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c
index e210da16156..0cc6fcb041f 100644
--- a/drivers/media/radio/radio-maxiradio.c
+++ b/drivers/media/radio/radio-maxiradio.c
@@ -410,7 +410,7 @@ static int __devinit maxiradio_init_one(struct pci_dev *pdev, const struct pci_d
 	mutex_init(&radio_unit.lock);
 	maxiradio_radio.priv = &radio_unit;
 
-	if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr)==-1) {
+	if (video_register_device(&maxiradio_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		printk("radio-maxiradio: can't register device!");
 		goto err_out_free_region;
 	}
diff --git a/drivers/media/radio/radio-rtrack2.c b/drivers/media/radio/radio-rtrack2.c
index e2dde080726..6d820e2481e 100644
--- a/drivers/media/radio/radio-rtrack2.c
+++ b/drivers/media/radio/radio-rtrack2.c
@@ -332,8 +332,7 @@ static int __init rtrack2_init(void)
 	rtrack2_radio.priv=&rtrack2_unit;
 
 	spin_lock_init(&lock);
-	if(video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-	{
+	if (video_register_device(&rtrack2_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 4);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index bb5d92f104a..0d478f54a90 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -377,7 +377,7 @@ static int __init fmi_init(void)
 
 	mutex_init(&lock);
 
-	if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) == -1) {
+	if (video_register_device(&fmi_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-si470x.c b/drivers/media/radio/radio-si470x.c
index a4984ff87c9..16c7ef20265 100644
--- a/drivers/media/radio/radio-si470x.c
+++ b/drivers/media/radio/radio-si470x.c
@@ -1694,8 +1694,8 @@ static int si470x_usb_driver_probe(struct usb_interface *intf,
 	INIT_DELAYED_WORK(&radio->work, si470x_work);
 
 	/* register video device */
-	if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr)) {
-		retval = -EIO;
+	retval = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+	if (retval) {
 		printk(KERN_WARNING DRIVER_NAME
 				": Could not register video device\n");
 		goto err_all;
diff --git a/drivers/media/radio/radio-terratec.c b/drivers/media/radio/radio-terratec.c
index cefa44fc5ae..0876fecc5f2 100644
--- a/drivers/media/radio/radio-terratec.c
+++ b/drivers/media/radio/radio-terratec.c
@@ -405,8 +405,7 @@ static int __init terratec_init(void)
 
 	spin_lock_init(&lock);
 
-	if(video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-	{
+	if (video_register_device(&terratec_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io,2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-trust.c b/drivers/media/radio/radio-trust.c
index d70172d23ed..19316195625 100644
--- a/drivers/media/radio/radio-trust.c
+++ b/drivers/media/radio/radio-trust.c
@@ -378,8 +378,7 @@ static int __init trust_init(void)
 		printk(KERN_ERR "trust: port 0x%x already in use\n", io);
 		return -EBUSY;
 	}
-	if(video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr)==-1)
-	{
+	if (video_register_device(&trust_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 2);
 		return -EINVAL;
 	}
diff --git a/drivers/media/radio/radio-zoltrix.c b/drivers/media/radio/radio-zoltrix.c
index 9f17a332fa1..51d57ed3b3e 100644
--- a/drivers/media/radio/radio-zoltrix.c
+++ b/drivers/media/radio/radio-zoltrix.c
@@ -446,8 +446,7 @@ static int __init zoltrix_init(void)
 		return -EBUSY;
 	}
 
-	if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) == -1)
-	{
+	if (video_register_device(&zoltrix_radio, VFL_TYPE_RADIO, radio_nr) < 0) {
 		release_region(io, 2);
 		return -EINVAL;
 	}
-- 
GitLab


From dc60de338f4b2d445a24d4e36bbc994f3badb406 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 3 Sep 2008 17:11:58 -0300
Subject: [PATCH 728/869] V4L/DVB (8779): v4l: fix more incorrect
 video_register_device result checks

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/bw-qcam.c         | 3 +--
 drivers/media/video/c-qcam.c          | 3 +--
 drivers/media/video/cpia.c            | 2 +-
 drivers/media/video/cpia2/cpia2_v4l.c | 3 +--
 drivers/media/video/se401.c           | 2 +-
 drivers/media/video/stv680.c          | 2 +-
 drivers/media/video/usbvideo/vicam.c  | 2 +-
 drivers/media/video/w9966.c           | 2 +-
 8 files changed, 8 insertions(+), 11 deletions(-)

diff --git a/drivers/media/video/bw-qcam.c b/drivers/media/video/bw-qcam.c
index d3b3268bace..6e39e253ce5 100644
--- a/drivers/media/video/bw-qcam.c
+++ b/drivers/media/video/bw-qcam.c
@@ -946,8 +946,7 @@ static int init_bwqcam(struct parport *port)
 
 	printk(KERN_INFO "Connectix Quickcam on %s\n", qcam->pport->name);
 
-	if(video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
-	{
+	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		parport_unregister_device(qcam->pdev);
 		kfree(qcam);
 		return -ENODEV;
diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c
index fe9379b282d..7f6c6b4bec1 100644
--- a/drivers/media/video/c-qcam.c
+++ b/drivers/media/video/c-qcam.c
@@ -787,8 +787,7 @@ static int init_cqcam(struct parport *port)
 
 	parport_release(qcam->pdev);
 
-	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr)==-1)
-	{
+	if (video_register_device(&qcam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		printk(KERN_ERR "Unable to register Colour QuickCam on %s\n",
 		       qcam->pport->name);
 		parport_unregister_device(qcam->pdev);
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index dc8cc6115e2..a661800b0e6 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -3955,7 +3955,7 @@ struct cam_data *cpia_register_camera(struct cpia_camera_ops *ops, void *lowleve
 	camera->lowlevel_data = lowlevel;
 
 	/* register v4l device */
-	if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+	if (video_register_device(&camera->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		kfree(camera);
 		printk(KERN_DEBUG "video_register_device failed\n");
 		return NULL;
diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c
index c8257060642..eb9f15cd4c4 100644
--- a/drivers/media/video/cpia2/cpia2_v4l.c
+++ b/drivers/media/video/cpia2/cpia2_v4l.c
@@ -1958,8 +1958,7 @@ int cpia2_register_camera(struct camera_data *cam)
 	reset_camera_struct_v4l(cam);
 
 	/* register v4l device */
-	if (video_register_device
-	    (cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+	if (video_register_device(cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		ERR("video_register_device failed\n");
 		video_device_release(cam->vdev);
 		return -ENODEV;
diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c
index f481277892d..acceed5d04a 100644
--- a/drivers/media/video/se401.c
+++ b/drivers/media/video/se401.c
@@ -1397,7 +1397,7 @@ static int se401_probe(struct usb_interface *intf,
 	mutex_init(&se401->lock);
 	wmb();
 
-	if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+	if (video_register_device(&se401->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		kfree(se401);
 		err("video_register_device failed");
 		return -EIO;
diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c
index 56dc3d6b5b2..dce94743945 100644
--- a/drivers/media/video/stv680.c
+++ b/drivers/media/video/stv680.c
@@ -1462,7 +1462,7 @@ static int stv680_probe (struct usb_interface *intf, const struct usb_device_id
 	mutex_init (&stv680->lock);
 	wmb ();
 
-	if (video_register_device (stv680->vdev, VFL_TYPE_GRABBER, video_nr) == -1) {
+	if (video_register_device(stv680->vdev, VFL_TYPE_GRABBER, video_nr) < 0) {
 		PDEBUG (0, "STV(e): video_register_device failed");
 		retval = -EIO;
 		goto error_vdev;
diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c
index b7792451a29..2eb45829791 100644
--- a/drivers/media/video/usbvideo/vicam.c
+++ b/drivers/media/video/usbvideo/vicam.c
@@ -866,7 +866,7 @@ vicam_probe( struct usb_interface *intf, const struct usb_device_id *id)
 	cam->udev = dev;
 	cam->bulkEndpoint = bulkEndpoint;
 
-	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) == -1) {
+	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, -1) < 0) {
 		kfree(cam);
 		printk(KERN_WARNING "video_register_device failed\n");
 		return -EIO;
diff --git a/drivers/media/video/w9966.c b/drivers/media/video/w9966.c
index 9402f40095b..2ff00bc5ad6 100644
--- a/drivers/media/video/w9966.c
+++ b/drivers/media/video/w9966.c
@@ -334,7 +334,7 @@ static int w9966_init(struct w9966_dev* cam, struct parport* port)
 	memcpy(&cam->vdev, &w9966_template, sizeof(struct video_device));
 	cam->vdev.priv = cam;
 
-	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) == -1)
+	if (video_register_device(&cam->vdev, VFL_TYPE_GRABBER, video_nr) < 0)
 		return -1;
 
 	w9966_setState(cam, W9966_STATE_VDEV, W9966_STATE_VDEV);
-- 
GitLab


From c5bf204f42423f49d7ea34f14eef92780204e168 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil@xs4all.nl>
Date: Wed, 3 Sep 2008 17:12:09 -0300
Subject: [PATCH 729/869] V4L/DVB (8790): saa7115: call i2c_set_clientdata only
 when state != NULL

Not a bug as such, but it looks really strange doing this before
checking whether the state structure could be allocated.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/saa7115.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index bcd1c8f6cf6..ad733caec72 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1489,10 +1489,9 @@ static int saa7115_probe(struct i2c_client *client,
 		 client->addr << 1, client->adapter->name);
 
 	state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
-	i2c_set_clientdata(client, state);
-	if (state == NULL) {
+	if (state == NULL)
 		return -ENOMEM;
-	}
+	i2c_set_clientdata(client, state);
 	state->input = -1;
 	state->output = SAA7115_IPORT_ON;
 	state->enable = 1;
-- 
GitLab


From 4fc85c74b431ba6e9a8e295e090cd532667b984d Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@hauppauge.com>
Date: Wed, 3 Sep 2008 17:12:12 -0300
Subject: [PATCH 730/869] V4L/DVB (8803): s5h1409: Enable QAM_AUTO mode

If apps pass QAM_AUTO then we need to obey it.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/s5h1409.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index 5ddb2dca305..0a56ae87832 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -404,6 +404,7 @@ static int s5h1409_enable_modulation(struct dvb_frontend* fe,
 		break;
 	case QAM_64:
 	case QAM_256:
+	case QAM_AUTO:
 		dprintk("%s() QAM_AUTO (64/256)\n", __func__);
 		if (state->if_freq != S5H1409_QAM_IF_FREQ)
 			s5h1409_set_if_freq(fe, S5H1409_QAM_IF_FREQ);
-- 
GitLab


From 5ca947a999c5ea5147cce3e42a9d790d3b87a246 Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@hauppauge.com>
Date: Wed, 3 Sep 2008 17:12:12 -0300
Subject: [PATCH 731/869] V4L/DVB (8804): s5h1411: Enable QAM_AUTO mode

If apps pass QAM_AUTO then we need to obey it.

Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/s5h1411.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c
index cff360ce1ba..763ac102c9c 100644
--- a/drivers/media/dvb/frontends/s5h1411.c
+++ b/drivers/media/dvb/frontends/s5h1411.c
@@ -488,6 +488,7 @@ static int s5h1411_enable_modulation(struct dvb_frontend *fe,
 		break;
 	case QAM_64:
 	case QAM_256:
+	case QAM_AUTO:
 		dprintk("%s() QAM_AUTO (64/256)\n", __func__);
 		s5h1411_set_if_freq(fe, state->config->qam_if);
 		s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x00, 0x0171);
-- 
GitLab


From 6d8976164dd7d10d25fe940b8546265f60ad52cd Mon Sep 17 00:00:00 2001
From: Steven Toth <stoth@hauppauge.com>
Date: Wed, 3 Sep 2008 17:12:12 -0300
Subject: [PATCH 732/869] V4L/DVB (8805): Steven Toth email address change

I need this so I can better isolate my linux email from my
corporate email.

Signed-off-by: Steven Toth <stoth@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/common/tuners/mt2131.c        | 2 +-
 drivers/media/common/tuners/mt2131.h        | 2 +-
 drivers/media/common/tuners/mt2131_priv.h   | 2 +-
 drivers/media/common/tuners/mxl5005s.c      | 4 ++--
 drivers/media/common/tuners/mxl5005s.h      | 2 +-
 drivers/media/common/tuners/xc5000.c        | 2 +-
 drivers/media/common/tuners/xc5000.h        | 2 +-
 drivers/media/common/tuners/xc5000_priv.h   | 2 +-
 drivers/media/dvb/frontends/au8522.c        | 2 +-
 drivers/media/dvb/frontends/au8522.h        | 2 +-
 drivers/media/dvb/frontends/cx22702.c       | 2 +-
 drivers/media/dvb/frontends/cx22702.h       | 2 +-
 drivers/media/dvb/frontends/cx24123.c       | 2 +-
 drivers/media/dvb/frontends/cx24123.h       | 2 +-
 drivers/media/dvb/frontends/s5h1409.c       | 2 +-
 drivers/media/dvb/frontends/s5h1409.h       | 2 +-
 drivers/media/dvb/frontends/s5h1411.c       | 2 +-
 drivers/media/dvb/frontends/s5h1411.h       | 2 +-
 drivers/media/dvb/frontends/tda10048.c      | 2 +-
 drivers/media/dvb/frontends/tda10048.h      | 2 +-
 drivers/media/video/au0828/au0828-cards.c   | 2 +-
 drivers/media/video/au0828/au0828-cards.h   | 2 +-
 drivers/media/video/au0828/au0828-core.c    | 4 ++--
 drivers/media/video/au0828/au0828-dvb.c     | 2 +-
 drivers/media/video/au0828/au0828-i2c.c     | 2 +-
 drivers/media/video/au0828/au0828-reg.h     | 2 +-
 drivers/media/video/au0828/au0828.h         | 2 +-
 drivers/media/video/cx18/cx18-dvb.c         | 2 +-
 drivers/media/video/cx18/cx18-dvb.h         | 2 +-
 drivers/media/video/cx23885/cx23885-417.c   | 2 +-
 drivers/media/video/cx23885/cx23885-cards.c | 2 +-
 drivers/media/video/cx23885/cx23885-core.c  | 4 ++--
 drivers/media/video/cx23885/cx23885-dvb.c   | 2 +-
 drivers/media/video/cx23885/cx23885-i2c.c   | 2 +-
 drivers/media/video/cx23885/cx23885-reg.h   | 2 +-
 drivers/media/video/cx23885/cx23885-vbi.c   | 2 +-
 drivers/media/video/cx23885/cx23885-video.c | 4 ++--
 drivers/media/video/cx23885/cx23885.h       | 2 +-
 drivers/media/video/cx25840/cx25840-core.c  | 2 +-
 39 files changed, 43 insertions(+), 43 deletions(-)

diff --git a/drivers/media/common/tuners/mt2131.c b/drivers/media/common/tuners/mt2131.c
index e254bcfc2ef..e8d3c48f860 100644
--- a/drivers/media/common/tuners/mt2131.c
+++ b/drivers/media/common/tuners/mt2131.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/mt2131.h b/drivers/media/common/tuners/mt2131.h
index cd8376f6f7b..6632de640df 100644
--- a/drivers/media/common/tuners/mt2131.h
+++ b/drivers/media/common/tuners/mt2131.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/mt2131_priv.h b/drivers/media/common/tuners/mt2131_priv.h
index e930759c2c0..4e05a67e88c 100644
--- a/drivers/media/common/tuners/mt2131_priv.h
+++ b/drivers/media/common/tuners/mt2131_priv.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for Microtune MT2131 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
index 0dc2bef9f6a..227642b044a 100644
--- a/drivers/media/common/tuners/mxl5005s.c
+++ b/drivers/media/common/tuners/mxl5005s.c
@@ -2,7 +2,7 @@
     MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
 
     Copyright (C) 2008 MaxLinear
-    Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
       Functions:
 	mxl5005s_reset()
 	mxl5005s_writereg()
@@ -3837,7 +3837,7 @@ static u16 MXL_Hystersis_Test(struct dvb_frontend *fe, int Hystersis)
 /* ----------------------------------------------------------------
  * Begin: Everything after here is new code to adapt the
  * proprietary Realtek driver into a Linux API tuner.
- * Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ * Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
  */
 static int mxl5005s_reset(struct dvb_frontend *fe)
 {
diff --git a/drivers/media/common/tuners/mxl5005s.h b/drivers/media/common/tuners/mxl5005s.h
index 396db150bf0..7ac6815b30a 100644
--- a/drivers/media/common/tuners/mxl5005s.h
+++ b/drivers/media/common/tuners/mxl5005s.h
@@ -2,7 +2,7 @@
     MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
 
     Copyright (C) 2008 MaxLinear
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c
index 5f99de0ad61..dcddfa803a7 100644
--- a/drivers/media/common/tuners/xc5000.c
+++ b/drivers/media/common/tuners/xc5000.c
@@ -2,7 +2,7 @@
  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
  *
  *  Copyright (c) 2007 Xceive Corporation
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h
index c910715addc..5389f740945 100644
--- a/drivers/media/common/tuners/xc5000.h
+++ b/drivers/media/common/tuners/xc5000.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/common/tuners/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h
index a72a9887fe7..b2a0074c99c 100644
--- a/drivers/media/common/tuners/xc5000_priv.h
+++ b/drivers/media/common/tuners/xc5000_priv.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
  *
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c
index 5a6cbb47627..0b82cc2a1e1 100644
--- a/drivers/media/dvb/frontends/au8522.c
+++ b/drivers/media/dvb/frontends/au8522.c
@@ -1,7 +1,7 @@
 /*
     Auvitek AU8522 QAM/8VSB demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/au8522.h b/drivers/media/dvb/frontends/au8522.h
index afc9af26e7a..595915ade8c 100644
--- a/drivers/media/dvb/frontends/au8522.h
+++ b/drivers/media/dvb/frontends/au8522.h
@@ -1,7 +1,7 @@
 /*
     Auvitek AU8522 QAM/8VSB demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index cc1db4e371c..9430e03dba6 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -7,7 +7,7 @@
     Copyright (C) 2001-2002 Convergence Integrated Media GmbH
 	  Holger Waechtler <holger@convergence.de>
 
-    Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h
index 8af766a3155..b1e465c6c2c 100644
--- a/drivers/media/dvb/frontends/cx22702.h
+++ b/drivers/media/dvb/frontends/cx22702.h
@@ -7,7 +7,7 @@
     Copyright (C) 2001-2002 Convergence Integrated Media GmbH
 	  Holger Waechtler <holger@convergence.de>
 
-    Copyright (C) 2004 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2004 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index 7f68d78c655..386bd7472b9 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -1,7 +1,7 @@
 /*
  *   Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
  *
- *   Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+ *   Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
  *
  *   Support for KWorld DVB-S 100 by Vadim Catana <skystar@moldova.cc>
  *
diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h
index 81ebc3d2f19..cc6b411d6d2 100644
--- a/drivers/media/dvb/frontends/cx24123.h
+++ b/drivers/media/dvb/frontends/cx24123.h
@@ -1,7 +1,7 @@
 /*
     Conexant cx24123/cx24109 - DVB QPSK Satellite demod/tuner driver
 
-    Copyright (C) 2005 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2005 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/s5h1409.c b/drivers/media/dvb/frontends/s5h1409.c
index 0a56ae87832..7500a1c53e6 100644
--- a/drivers/media/dvb/frontends/s5h1409.c
+++ b/drivers/media/dvb/frontends/s5h1409.c
@@ -1,7 +1,7 @@
 /*
     Samsung S5H1409 VSB/QAM demodulator driver
 
-    Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/s5h1409.h b/drivers/media/dvb/frontends/s5h1409.h
index 59f4335964c..d1a1d2eb8e1 100644
--- a/drivers/media/dvb/frontends/s5h1409.h
+++ b/drivers/media/dvb/frontends/s5h1409.h
@@ -1,7 +1,7 @@
 /*
     Samsung S5H1409 VSB/QAM demodulator driver
 
-    Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2006 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c
index 763ac102c9c..2da1a3763de 100644
--- a/drivers/media/dvb/frontends/s5h1411.c
+++ b/drivers/media/dvb/frontends/s5h1411.c
@@ -1,7 +1,7 @@
 /*
     Samsung S5H1411 VSB/QAM demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/s5h1411.h b/drivers/media/dvb/frontends/s5h1411.h
index 1855f64ed4d..7d542bc00c4 100644
--- a/drivers/media/dvb/frontends/s5h1411.h
+++ b/drivers/media/dvb/frontends/s5h1411.h
@@ -1,7 +1,7 @@
 /*
     Samsung S5H1411 VSB/QAM demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index 0ab8d86b3ae..7727099a16f 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -1,7 +1,7 @@
 /*
     NXP TDA10048HN DVB OFDM demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/dvb/frontends/tda10048.h b/drivers/media/dvb/frontends/tda10048.h
index 2b5c78e62c8..0457b24601f 100644
--- a/drivers/media/dvb/frontends/tda10048.h
+++ b/drivers/media/dvb/frontends/tda10048.h
@@ -1,7 +1,7 @@
 /*
     NXP TDA10048HN DVB OFDM demodulator driver
 
-    Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
 
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 14b9fc9bb62..ed48908a903 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/au0828/au0828-cards.h b/drivers/media/video/au0828/au0828-cards.h
index 102ed03dc6b..48a1882c2b6 100644
--- a/drivers/media/video/au0828/au0828-cards.h
+++ b/drivers/media/video/au0828/au0828-cards.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/au0828/au0828-core.c b/drivers/media/video/au0828/au0828-core.c
index 54bfc0f0529..d856de9f742 100644
--- a/drivers/media/video/au0828/au0828-core.c
+++ b/drivers/media/video/au0828/au0828-core.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -252,5 +252,5 @@ module_init(au0828_init);
 module_exit(au0828_exit);
 
 MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index 194865380ce..ba94be7e0ac 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/au0828/au0828-i2c.c b/drivers/media/video/au0828/au0828-i2c.c
index 741a4937b05..d618fbaade1 100644
--- a/drivers/media/video/au0828/au0828-i2c.c
+++ b/drivers/media/video/au0828/au0828-i2c.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek AU0828 USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/au0828/au0828-reg.h b/drivers/media/video/au0828/au0828-reg.h
index 39827550891..1e87fa0c684 100644
--- a/drivers/media/video/au0828/au0828-reg.h
+++ b/drivers/media/video/au0828/au0828-reg.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/au0828/au0828.h b/drivers/media/video/au0828/au0828.h
index 7beb571798e..4f10ff30013 100644
--- a/drivers/media/video/au0828/au0828.h
+++ b/drivers/media/video/au0828/au0828.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Auvitek AU0828 USB bridge
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index cae38985b13..1e420a804fc 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -1,7 +1,7 @@
 /*
  *  cx18 functions for DVB support
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx18/cx18-dvb.h b/drivers/media/video/cx18/cx18-dvb.h
index d6a6ccda79a..bf8d8f6f545 100644
--- a/drivers/media/video/cx18/cx18-dvb.h
+++ b/drivers/media/video/cx18/cx18-dvb.h
@@ -1,7 +1,7 @@
 /*
  *  cx18 functions for DVB support
  *
- *  Copyright (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 8118091568f..7b0e8c01692 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -4,7 +4,7 @@
  *
  *    (c) 2004 Jelle Foks <jelle@foks.8m.com>
  *    (c) 2004 Gerd Knorr <kraxel@bytesex.org>
- *    (c) 2008 Steven Toth <stoth@hauppauge.com>
+ *    (c) 2008 Steven Toth <stoth@linuxtv.org>
  *      - CX23885/7/8 support
  *
  *  Includes parts from the ivtv driver( http://ivtv.sourceforge.net/),
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index a19de850955..c36d3f63210 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index 6286a9cf957..25fb0993874 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -33,7 +33,7 @@
 #include "cx23885.h"
 
 MODULE_DESCRIPTION("Driver for cx23885 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
 MODULE_LICENSE("GPL");
 
 static unsigned int debug;
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 0a2e6558cd6..291b9d008da 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-i2c.c b/drivers/media/video/cx23885/cx23885-i2c.c
index c6bb0a05bc1..f98e476e961 100644
--- a/drivers/media/video/cx23885/cx23885-i2c.c
+++ b/drivers/media/video/cx23885/cx23885-i2c.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-reg.h b/drivers/media/video/cx23885/cx23885-reg.h
index bdd11bc513a..20b68a23626 100644
--- a/drivers/media/video/cx23885/cx23885-reg.h
+++ b/drivers/media/video/cx23885/cx23885-reg.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-vbi.c b/drivers/media/video/cx23885/cx23885-vbi.c
index e36e3fcae2f..35e61cd112f 100644
--- a/drivers/media/video/cx23885/cx23885-vbi.c
+++ b/drivers/media/video/cx23885/cx23885-vbi.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c
index ad2235dab5b..6047c78d84b 100644
--- a/drivers/media/video/cx23885/cx23885-video.c
+++ b/drivers/media/video/cx23885/cx23885-video.c
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2007 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -41,7 +41,7 @@
 #endif
 
 MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards");
-MODULE_AUTHOR("Steven Toth <stoth@hauppauge.com>");
+MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>");
 MODULE_LICENSE("GPL");
 
 /* ------------------------------------------------------------------ */
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 00dfdc89d64..e23d97c071e 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -1,7 +1,7 @@
 /*
  *  Driver for the Conexant CX23885 PCIe bridge
  *
- *  Copyright (c) 2006 Steven Toth <stoth@hauppauge.com>
+ *  Copyright (c) 2006 Steven Toth <stoth@linuxtv.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 209d3bcb5db..4da8cd74f00 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -13,7 +13,7 @@
  * NTSC sliced VBI support by Christopher Neufeld <television@cneufeld.ca>
  * with additional fixes by Hans Verkuil <hverkuil@xs4all.nl>.
  *
- * CX23885 support by Steven Toth <stoth@hauppauge.com>.
+ * CX23885 support by Steven Toth <stoth@linuxtv.org>.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
-- 
GitLab


From d6db35e89c420d867e9ffdf145ecf2cb1b91291b Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:13 -0300
Subject: [PATCH 733/869] V4L/DVB (8809): gspca: Revert commit
 9a9335776548d01525141c6e8f0c12e86bbde982

the previous patch (sensor upside down).

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c |  2 --
 drivers/media/video/gspca/gspca.h |  4 ----
 drivers/media/video/gspca/zc3xx.c | 31 ++++++++++++-------------------
 include/linux/videodev2.h         |  5 -----
 4 files changed, 12 insertions(+), 30 deletions(-)

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 0b292ca0c08..bffddf52775 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -851,8 +851,6 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE
 			  | V4L2_CAP_STREAMING
 			  | V4L2_CAP_READWRITE;
-	if (gspca_dev->flags & GSPCA_SENSOR_UPSIDE_DOWN_FLAG)
-		cap->capabilities |= V4L2_CAP_SENSOR_UPSIDE_DOWN;
 	return 0;
 }
 
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 1920c99d6f4..2596568e82f 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -118,9 +118,6 @@ struct gspca_frame {
 	struct v4l2_buffer v4l2_buf;
 };
 
-/* defines for the flags member */
-#define GSPCA_SENSOR_UPSIDE_DOWN_FLAG 0x01
-
 struct gspca_dev {
 	struct video_device vdev;	/* !! must be the first item */
 	struct file_operations fops;
@@ -166,7 +163,6 @@ struct gspca_dev {
 	char nurbs;			/* number of allocated URBs */
 	char memory;			/* memory type (V4L2_MEMORY_xxx) */
 	__u8 nbalt;			/* number of USB alternate settings */
-	__u8 flags;                     /* see GSPCA_XXX_FLAG defines */
 };
 
 int gspca_dev_probe(struct usb_interface *intf,
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index f1d8c7a08ba..79436f27cd4 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -70,10 +70,6 @@ struct sd {
 	unsigned short chip_revision;
 };
 
-#define DRIVER_INFO(sensor, flags) .driver_info = ((sensor) << 8) | (flags)
-#define DRIVER_INFO_GET_SENSOR(driver_info) ((driver_info) >> 8)
-#define DRIVER_INFO_GET_FLAGS(driver_info)  ((driver_info) & 0xff)
-
 /* V4L2 controls supported by the driver */
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getbrightness(struct gspca_dev *gspca_dev, __s32 *val);
@@ -7019,8 +7015,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 	/* define some sensors from the vendor/product */
 	sd->sharpness = 2;
-	sd->sensor = DRIVER_INFO_GET_SENSOR(id->driver_info);
-	gspca_dev->flags = DRIVER_INFO_GET_FLAGS(id->driver_info);
+	sd->sensor = id->driver_info;
 	sensor = zcxx_probeSensor(gspca_dev);
 	if (sensor >= 0)
 		PDEBUG(D_PROBE, "probe sensor -> %02x", sensor);
@@ -7510,19 +7505,19 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x041e)},
 #ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x041e, 0x4017)},
-	{USB_DEVICE(0x041e, 0x401c), DRIVER_INFO(SENSOR_PAS106, 0)},
+	{USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x401e)},
 	{USB_DEVICE(0x041e, 0x401f)},
 #endif
 	{USB_DEVICE(0x041e, 0x4029)},
 #ifndef CONFIG_USB_ZC0301
-	{USB_DEVICE(0x041e, 0x4034), DRIVER_INFO(SENSOR_PAS106, 0)},
-	{USB_DEVICE(0x041e, 0x4035), DRIVER_INFO(SENSOR_PAS106, 0)},
+	{USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x4036)},
 	{USB_DEVICE(0x041e, 0x403a)},
 #endif
-	{USB_DEVICE(0x041e, 0x4051), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)},
-	{USB_DEVICE(0x041e, 0x4053), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)},
+	{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
+	{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
 #ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x0458, 0x7007)},
 	{USB_DEVICE(0x0458, 0x700c)},
@@ -7548,13 +7543,11 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x046d, 0x08d9)},
 	{USB_DEVICE(0x046d, 0x08d8)},
 	{USB_DEVICE(0x046d, 0x08da)},
-	{USB_DEVICE(0x046d, 0x08dd), DRIVER_INFO(SENSOR_MC501CB, 0)},
-	{USB_DEVICE(0x0471, 0x0325), DRIVER_INFO(SENSOR_PAS106,
-		GSPCA_SENSOR_UPSIDE_DOWN_FLAG)},
-	{USB_DEVICE(0x0471, 0x0326), DRIVER_INFO(SENSOR_PAS106,
-		GSPCA_SENSOR_UPSIDE_DOWN_FLAG)},
-	{USB_DEVICE(0x0471, 0x032d), DRIVER_INFO(SENSOR_PAS106, 0)},
-	{USB_DEVICE(0x0471, 0x032e), DRIVER_INFO(SENSOR_PAS106, 0)},
+	{USB_DEVICE(0x046d, 0x08dd), .driver_info = SENSOR_MC501CB},
+	{USB_DEVICE(0x0471, 0x0325), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x0471, 0x0326), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106},
+	{USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x055f, 0xc005)},
 #ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x055f, 0xd003)},
@@ -7566,7 +7559,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0ac8, 0x301b)},
 	{USB_DEVICE(0x0ac8, 0x303b)},
 #endif
-	{USB_DEVICE(0x0ac8, 0x305b), DRIVER_INFO(SENSOR_TAS5130C_VF0250, 0)},
+	{USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250},
 #ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x0ac8, 0x307b)},
 	{USB_DEVICE(0x10fd, 0x0128)},
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 4c30655b293..6c73516b74c 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -261,11 +261,6 @@ struct v4l2_capability {
 #define V4L2_CAP_ASYNCIO                0x02000000  /* async I/O */
 #define V4L2_CAP_STREAMING              0x04000000  /* streaming I/O ioctls */
 
-/* This flags gets set if the "sensor" is known to be upside down and this can
-   *not* be fixed using v4l2 flipx/y controls. Note that absence of this flag
-   is not a guarantee for the image not being upside down. */
-#define V4L2_CAP_SENSOR_UPSIDE_DOWN     0x10000000
-
 /*
  *	V I D E O   I M A G E   F O R M A T
  */
-- 
GitLab


From 62ee8eeebd1bf6c29977800ac18dfcecf584d42e Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:13 -0300
Subject: [PATCH 734/869] V4L/DVB (8810): gspca: Compile error when CONFIG_PM
 not defined.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index bffddf52775..28842ed24c0 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -114,7 +114,9 @@ static void fill_frame(struct gspca_dev *gspca_dev,
 	cam_pkt_op pkt_scan;
 
 	if (urb->status != 0) {
+#ifdef CONFIG_PM
 		if (!gspca_dev->frozen)
+#endif
 			PDEBUG(D_ERR|D_PACK, "urb status: %d", urb->status);
 		return;		/* disconnection ? */
 	}
-- 
GitLab


From 327c4abf74a4426676df6c359b2a3dea2a5d126e Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:14 -0300
Subject: [PATCH 735/869] V4L/DVB (8812): gspca: Do pac73xx webcams work.

- documentation for some registers
- some preparations for adding autogain_n_exposure functionality
- various pac7311 fixes
- disable brightness and colors controls for 7311
- fix contrast control for 7311
- add hflip and vflip controls for 7311
- minimal jpeg header
- proper SOF detection

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/pac207.c     |  36 +--
 drivers/media/video/gspca/pac7311.c    | 309 +++++++++++++------------
 drivers/media/video/gspca/pac_common.h |  53 +++++
 3 files changed, 220 insertions(+), 178 deletions(-)
 create mode 100644 drivers/media/video/gspca/pac_common.h

diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index d9668f4cb4d..620c9631629 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -181,9 +181,6 @@ static const __u8 pac207_sensor_init[][8] = {
 			/* 48 reg_72 Rate Control end BalSize_4a =0x36 */
 static const __u8 PacReg72[] = { 0x00, 0x00, 0x36, 0x00 };
 
-static const unsigned char pac207_sof_marker[5] =
-		{ 0xff, 0xff, 0x00, 0xff, 0x96 };
-
 static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index,
 	const u8 *buffer, u16 length)
 {
@@ -367,31 +364,8 @@ static void pac207_do_auto_gain(struct gspca_dev *gspca_dev)
 		sd->autogain_ignore_frames = PAC207_AUTOGAIN_IGNORE_FRAMES;
 }
 
-static unsigned char *pac207_find_sof(struct gspca_dev *gspca_dev,
-					unsigned char *m, int len)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-	int i;
-
-	/* Search for the SOF marker (fixed part) in the header */
-	for (i = 0; i < len; i++) {
-		if (m[i] == pac207_sof_marker[sd->sof_read]) {
-			sd->sof_read++;
-			if (sd->sof_read == sizeof(pac207_sof_marker)) {
-				PDEBUG(D_STREAM,
-					"SOF found, bytes to analyze: %u."
-					" Frame starts at byte #%u",
-					len, i + 1);
-				sd->sof_read = 0;
-				return m + i + 1;
-			}
-		} else {
-			sd->sof_read = 0;
-		}
-	}
-
-	return NULL;
-}
+/* Include pac common sof detection functions */
+#include "pac_common.h"
 
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,
@@ -401,14 +375,14 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	unsigned char *sof;
 
-	sof = pac207_find_sof(gspca_dev, data, len);
+	sof = pac_find_sof(gspca_dev, data, len);
 	if (sof) {
 		int n;
 
 		/* finish decoding current frame */
 		n = sof - data;
-		if (n > sizeof pac207_sof_marker)
-			n -= sizeof pac207_sof_marker;
+		if (n > sizeof pac_sof_marker)
+			n -= sizeof pac_sof_marker;
 		else
 			n = 0;
 		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 4cc9379ee41..bed04cc9a58 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -19,10 +19,36 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
+/* Some documentation about various registers as determined by trial and error.
+   When the register addresses differ between the 7202 and the 7311 the 2
+   different addresses are written as 7302addr/7311addr, when one of the 2
+   addresses is a - sign that register description is not valid for the
+   matching IC.
+
+   Register page 1:
+
+   Address	Description
+   -/0x08	Unknown compressor related, must always be 8 except when not
+		in 640x480 resolution and page 4 reg 2 <= 3 then set it to 9 !
+   -/0x1b	Auto white balance related, bit 0 is AWB enable (inverted)
+		bits 345 seem to toggle per color gains on/off (inverted)
+   0x78		Global control, bit 6 controls the LED (inverted)
+   -/0x80	JPEG compression ratio ? Best not touched
+
+   Register page 3/4:
+
+   Address	Description
+   0x02		Clock divider 2-63, fps =~ 60 / val. Must be a multiple of 3 on
+		the 7302, so one of 3, 6, 9, ...
+   -/0x0f	Master gain 1-245, low value = high gain
+   0x10/-	Master gain 0-31
+   -/0x10	Another gain 0-15, limited influence (1-2x gain I guess)
+   0x21		Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused
+*/
+
 #define MODULE_NAME "pac7311"
 
 #include "gspca.h"
-#include "jpeg.h"
 
 MODULE_AUTHOR("Thomas Kaiser thomas@kaiser-linux.li");
 MODULE_DESCRIPTION("Pixart PAC7311");
@@ -32,25 +58,22 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;		/* !! must be the first item */
 
-	int lum_sum;
-	atomic_t avg_lum;
-	atomic_t do_gain;
-
 	unsigned char brightness;
 	unsigned char contrast;
 	unsigned char colors;
 	unsigned char autogain;
 	__u8 hflip;
 	__u8 vflip;
-	__u8 qindex;
-
-	char tosof;	/* number of bytes before next start of frame */
-	signed char ag_cnt;
-#define AG_CNT_START 13
 
 	__u8 sensor;
 #define SENSOR_PAC7302 0
 #define SENSOR_PAC7311 1
+
+	u8 sof_read;
+	u8 header_read;
+	u8 autogain_ignore_frames;
+
+	atomic_t avg_lum;
 };
 
 /* V4L2 controls supported by the driver */
@@ -92,7 +115,7 @@ static struct ctrl sd_ctrls[] = {
 #define CONTRAST_MAX 255
 		.maximum = CONTRAST_MAX,
 		.step    = 1,
-#define CONTRAST_DEF 60
+#define CONTRAST_DEF 127
 		.default_value = CONTRAST_DEF,
 	    },
 	    .set = sd_setcontrast,
@@ -243,7 +266,7 @@ static const __u8 start_7302[] = {
 	0x2a, 5,	0xc8, 0x00, 0x18, 0x12, 0x22,
 	0x64, 8,	0x00, 0x00, 0xf0, 0x01, 0x14, 0x44, 0x44, 0x44,
 	0x6e, 1,	0x08,
-	0xff, 1,	0x03,		/* page 1 */
+	0xff, 1,	0x01,		/* page 1 */
 	0x78, 1,	0x00,
 	0, 0				/* end of sequence */
 };
@@ -274,9 +297,9 @@ static const __u8 page3_7302[] = {
 
 /* pac 7311 */
 static const __u8 probe_7311[] = {
-	0x78, 0x40,	/* Bit_0=start stream, Bit_7=LED */
-	0x78, 0x40,	/* Bit_0=start stream, Bit_7=LED */
-	0x78, 0x44,	/* Bit_0=start stream, Bit_7=LED */
+	0x78, 0x40,	/* Bit_0=start stream, Bit_6=LED */
+	0x78, 0x40,	/* Bit_0=start stream, Bit_6=LED */
+	0x78, 0x44,	/* Bit_0=start stream, Bit_6=LED */
 	0xff, 0x04,
 	0x27, 0x80,
 	0x28, 0xca,
@@ -340,18 +363,6 @@ static void reg_w_buf(struct gspca_dev *gspca_dev,
 			500);
 }
 
-static __u8 reg_r(struct gspca_dev *gspca_dev,
-			     __u8 index)
-{
-	usb_control_msg(gspca_dev->dev,
-			usb_rcvctrlpipe(gspca_dev->dev, 0),
-			0,			/* request */
-			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			0,			/* value */
-			index, gspca_dev->usb_buf, 1,
-			500);
-	return gspca_dev->usb_buf[0];
-}
 
 static void reg_w(struct gspca_dev *gspca_dev,
 		  __u8 index,
@@ -413,7 +424,7 @@ static void reg_w_var(struct gspca_dev *gspca_dev,
 			reg_w_page(gspca_dev, page3_7302, sizeof page3_7302);
 			break;
 		default:
-			if (len > 32) {
+			if (len > 64) {
 				PDEBUG(D_ERR|D_STREAM,
 					"Incorrect variable sequence");
 				return;
@@ -453,7 +464,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->nmodes = 1;
 	} else {
 		PDEBUG(D_CONF, "Find Sensor PAC7311");
-		reg_w_seq(gspca_dev, probe_7302, sizeof probe_7302);
+		reg_w_seq(gspca_dev, probe_7311, sizeof probe_7311);
 
 		cam->cam_mode = vga_mode;
 		cam->nmodes = ARRAY_SIZE(vga_mode);
@@ -465,8 +476,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->autogain = AUTOGAIN_DEF;
 	sd->hflip = HFLIP_DEF;
 	sd->vflip = VFLIP_DEF;
-	sd->qindex = 3;
-	sd->ag_cnt = -1;
 	return 0;
 }
 
@@ -497,6 +506,7 @@ static void setbrightcont(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0xdc, 0x01);
 }
 
+/* This function is used by pac7302 only */
 static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -506,7 +516,10 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 		setbrightcont(gspca_dev);
 		return;
 	}
-/*jfm: inverted?*/
+/* HDG: this is not brightness but gain, I'll add gain and exposure controls
+   in a next patch */
+	return;
+
 	brightness = BRIGHTNESS_MAX - sd->brightness;
 	reg_w(gspca_dev, 0xff, 0x04);
 	reg_w(gspca_dev, 0x0e, 0x00);
@@ -524,12 +537,13 @@ static void setcontrast(struct gspca_dev *gspca_dev)
 		setbrightcont(gspca_dev);
 		return;
 	}
-	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x10, sd->contrast);
+	reg_w(gspca_dev, 0xff, 0x04);
+	reg_w(gspca_dev, 0x10, sd->contrast >> 4);
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
 }
 
+/* This function is used by pac7302 only */
 static void setcolors(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -551,36 +565,24 @@ static void setcolors(struct gspca_dev *gspca_dev)
 			reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
 		}
 		reg_w(gspca_dev, 0xdc, 0x01);
-		return;
+		PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
 	}
-	reg_w(gspca_dev, 0xff, 0x01);
-	reg_w(gspca_dev, 0x80, sd->colors);
-	/* load registers to sensor (Bit 0, auto clear) */
-	reg_w(gspca_dev, 0x11, 0x01);
-	PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
 }
 
-static void setautogain(struct gspca_dev *gspca_dev)
-{
-	struct sd *sd = (struct sd *) gspca_dev;
-
-	if (sd->autogain) {
-		sd->lum_sum = 0;
-		sd->ag_cnt = AG_CNT_START;
-	} else {
-		sd->ag_cnt = -1;
-	}
-}
-
-/* this function is used by pac7302 only */
 static void sethvflip(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	__u8 data;
 
-	reg_w(gspca_dev, 0xff, 0x03);		/* page 3 */
-	data = (sd->hflip ? 0x00 : 0x08)
-		| (sd->vflip ? 0x04 : 0x00);
+	if (sd->sensor == SENSOR_PAC7302) {
+		reg_w(gspca_dev, 0xff, 0x03);		/* page 3 */
+		data = (sd->hflip ? 0x00 : 0x08)
+			| (sd->vflip ? 0x04 : 0x00);
+	} else {
+		reg_w(gspca_dev, 0xff, 0x04);		/* page 3 */
+		data = (sd->hflip ? 0x04 : 0x00)
+			| (sd->vflip ? 0x08 : 0x00);
+	}
 	reg_w(gspca_dev, 0x21, data);
 	reg_w(gspca_dev, 0x11, 0x01);
 }
@@ -588,7 +590,6 @@ static void sethvflip(struct gspca_dev *gspca_dev)
 /* this function is called at open time */
 static int sd_open(struct gspca_dev *gspca_dev)
 {
-	reg_w(gspca_dev, 0x78, 0x44);	/* Turn on LED */
 	return 0;
 }
 
@@ -596,7 +597,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	sd->tosof = 0;
+	sd->sof_read = 0;
 
 	if (sd->sensor == SENSOR_PAC7302)
 		reg_w_var(gspca_dev, start_7302);
@@ -606,7 +607,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	setcontrast(gspca_dev);
 	setbrightness(gspca_dev);
 	setcolors(gspca_dev);
-	setautogain(gspca_dev);
 
 	/* set correct resolution */
 	switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) {
@@ -621,7 +621,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		break;
 	case 1:					/* 320x240 pac7311 */
 		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x02, 0x07);
+		reg_w(gspca_dev, 0x02, 0x03);
 		reg_w(gspca_dev, 0xff, 0x01);
 		reg_w(gspca_dev, 0x08, 0x09);
 		reg_w(gspca_dev, 0x17, 0x30);
@@ -650,6 +650,10 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		reg_w(gspca_dev, 0x78, 0x44);
 		reg_w(gspca_dev, 0x78, 0x45);
 	}
+
+	sd->sof_read = 0;
+	sd->autogain_ignore_frames = 0;
+	atomic_set(&sd->avg_lum, -1);
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
@@ -657,6 +661,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	if (sd->sensor == SENSOR_PAC7302) {
+		reg_w(gspca_dev, 0xff, 0x01);
 		reg_w(gspca_dev, 0x78, 0x00);
 		reg_w(gspca_dev, 0x78, 0x00);
 		return;
@@ -668,9 +673,9 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x2a, 0x0e);
 	reg_w(gspca_dev, 0xff, 0x01);
 	reg_w(gspca_dev, 0x3e, 0x20);
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
-	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_7=LED */
+	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
+	reg_w(gspca_dev, 0x78, 0x44); /* Bit_0=start stream, Bit_6=LED */
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
@@ -690,42 +695,22 @@ static void sd_close(struct gspca_dev *gspca_dev)
 
 static void do_autogain(struct gspca_dev *gspca_dev)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
-	int luma;
-	int luma_mean = 128;
-	int luma_delta = 20;
-	__u8 spring = 5;
-	int Gbright;
-
-	if (!atomic_read(&sd->do_gain))
-		return;
-	atomic_set(&sd->do_gain, 0);
-
-	luma = atomic_read(&sd->avg_lum);
-	Gbright = reg_r(gspca_dev, 0x02);
-	PDEBUG(D_FRAM, "luma mean %d", luma);
-	if (luma < luma_mean - luma_delta ||
-	    luma > luma_mean + luma_delta) {
-		Gbright += (luma_mean - luma) >> spring;
-		if (Gbright > 0x1a)
-			Gbright = 0x1a;
-		else if (Gbright < 4)
-			Gbright = 4;
-		PDEBUG(D_FRAM, "gbright %d", Gbright);
-		if (sd->sensor == SENSOR_PAC7302) {
-			reg_w(gspca_dev, 0xff, 0x03);
-			reg_w(gspca_dev, 0x10, Gbright);
-			/* load registers to sensor (Bit 0, auto clear) */
-			reg_w(gspca_dev, 0x11, 0x01);
-		} else {
-			reg_w(gspca_dev, 0xff, 0x04);
-			reg_w(gspca_dev, 0x0f, Gbright);
-			/* load registers to sensor (Bit 0, auto clear) */
-			reg_w(gspca_dev, 0x11, 0x01);
-		}
-	}
 }
 
+static const unsigned char pac7311_jpeg_header1[] = {
+  0xff, 0xd8, 0xff, 0xc0, 0x00, 0x11, 0x08
+};
+
+static const unsigned char pac7311_jpeg_header2[] = {
+  0x03, 0x01, 0x21, 0x00, 0x02, 0x11, 0x01, 0x03, 0x11, 0x01, 0xff, 0xda,
+  0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00
+};
+
+/* Include pac common sof detection functions */
+#include "pac_common.h"
+
+#define HEADER_LENGTH 2
+
 /* this function is run at interrupt level */
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
@@ -733,58 +718,89 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			int len)			/* iso packet length */
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int i;
-
-#define INTER_FRAME 0x53	/* eof + inter frame + sof */
-#define LUM_OFFSET 0x1e		/* reverse offset / start of frame */
-
-	/*
-	 * inside a frame, there may be:
-	 *	escaped ff ('ff 00')
-	 *	sequences'ff ff ff xx' to remove
-	 *	end of frame ('ff d9')
-	 * at the end of frame, there are:
-	 *	ff d9			end of frame
-	 *	0x33 bytes
-	 *	one byte luminosity
-	 *	0x16 bytes
-	 *	ff ff 00 ff 96 62 44	start of frame
-	 */
-
-	if (sd->tosof != 0) {	/* if outside a frame */
-
-		/* get the luminosity and go to the start of frame */
-		data += sd->tosof;
-		len -= sd->tosof;
-		if (sd->tosof > LUM_OFFSET)
-			sd->lum_sum += data[-LUM_OFFSET];
-		sd->tosof = 0;
-		jpeg_put_header(gspca_dev, frame, sd->qindex, 0x21);
+	unsigned char *sof;
+
+	sof = pac_find_sof(gspca_dev, data, len);
+	if (sof) {
+		unsigned char tmpbuf[4];
+		int n, lum_offset, footer_length;
+
+		if (sd->sensor == SENSOR_PAC7302) {
+		  lum_offset = 34 + sizeof pac_sof_marker;
+		  footer_length = 74;
+		} else {
+		  lum_offset = 24 + sizeof pac_sof_marker;
+		  footer_length = 26;
+		}
+
+		/* Finish decoding current frame */
+		n = (sof - data) - (footer_length + sizeof pac_sof_marker);
+		if (n < 0) {
+			frame->data_end += n;
+			n = 0;
+		}
+		frame = gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+					data, n);
+		if (gspca_dev->last_packet_type != DISCARD_PACKET &&
+				frame->data_end[-2] == 0xff &&
+				frame->data_end[-1] == 0xd9)
+			frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
+						NULL, 0);
+
+		n = sof - data;
+		len -= n;
+		data = sof;
+
+		/* Get average lumination */
+		if (gspca_dev->last_packet_type == LAST_PACKET &&
+				n >= lum_offset) {
+			if (sd->sensor == SENSOR_PAC7302)
+				atomic_set(&sd->avg_lum,
+						(data[-lum_offset] << 8) |
+						data[-lum_offset + 1]);
+			else
+				atomic_set(&sd->avg_lum,
+						data[-lum_offset] +
+						data[-lum_offset + 1]);
+		} else {
+			atomic_set(&sd->avg_lum, -1);
+		}
+
+		/* Start the new frame with the jpeg header */
+		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+			pac7311_jpeg_header1, sizeof(pac7311_jpeg_header1));
+		if (sd->sensor == SENSOR_PAC7302) {
+			/* The PAC7302 has the image rotated 90 degrees */
+			tmpbuf[0] = gspca_dev->width >> 8;
+			tmpbuf[1] = gspca_dev->width & 0xff;
+			tmpbuf[2] = gspca_dev->height >> 8;
+			tmpbuf[3] = gspca_dev->height & 0xff;
+		} else {
+			tmpbuf[0] = gspca_dev->height >> 8;
+			tmpbuf[1] = gspca_dev->height & 0xff;
+			tmpbuf[2] = gspca_dev->width >> 8;
+			tmpbuf[3] = gspca_dev->width & 0xff;
+		}
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame, tmpbuf, 4);
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+			pac7311_jpeg_header2, sizeof(pac7311_jpeg_header2));
+
+		sd->header_read = 0;
 	}
 
-	for (i = 0; i < len; i++) {
-		if (data[i] != 0xff)
-			continue;
-		switch (data[i + 1]) {
-		case 0xd9:		/* 'ff d9' end of frame */
-			frame = gspca_frame_add(gspca_dev,
-						LAST_PACKET,
-						frame, data, i + 2);
-			data += i + INTER_FRAME;
-			len -= i + INTER_FRAME;
-			i = 0;
-			if (len > -LUM_OFFSET)
-				sd->lum_sum += data[-LUM_OFFSET];
-			if (len < 0) {
-				sd->tosof = -len;
-				break;
-			}
-			jpeg_put_header(gspca_dev, frame, sd->qindex, 0x21);
-			break;
+	if (sd->header_read < HEADER_LENGTH) {
+		/* skip the variable part of the sof header */
+		int needed = HEADER_LENGTH - sd->header_read;
+		if (len <= needed) {
+			sd->header_read += len;
+			return;
 		}
+		data += needed;
+		len -= needed;
+		sd->header_read = HEADER_LENGTH;
 	}
-	gspca_frame_add(gspca_dev, INTER_PACKET,
-			frame, data, i);
+
+	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
 }
 
 static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
@@ -846,8 +862,7 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->autogain = val;
-	if (gspca_dev->streaming)
-		setautogain(gspca_dev);
+
 	return 0;
 }
 
diff --git a/drivers/media/video/gspca/pac_common.h b/drivers/media/video/gspca/pac_common.h
new file mode 100644
index 00000000000..a19b5d44c00
--- /dev/null
+++ b/drivers/media/video/gspca/pac_common.h
@@ -0,0 +1,53 @@
+/*
+ * Pixart PAC207BCA / PAC73xx common functions
+ *
+ * Copyright (C) 2008 Hans de Goede <j.w.r.degoede@hhs.nl>
+ * Copyright (C) 2005 Thomas Kaiser thomas@kaiser-linux.li
+ * Copyleft (C) 2005 Michel Xhaard mxhaard@magic.fr
+ *
+ * V4L2 by Jean-Francois Moine <http://moinejf.free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+static const unsigned char pac_sof_marker[5] =
+		{ 0xff, 0xff, 0x00, 0xff, 0x96 };
+
+static unsigned char *pac_find_sof(struct gspca_dev *gspca_dev,
+					unsigned char *m, int len)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+
+	/* Search for the SOF marker (fixed part) in the header */
+	for (i = 0; i < len; i++) {
+		if (m[i] == pac_sof_marker[sd->sof_read]) {
+			sd->sof_read++;
+			if (sd->sof_read == sizeof(pac_sof_marker)) {
+				PDEBUG(D_STREAM,
+					"SOF found, bytes to analyze: %u."
+					" Frame starts at byte #%u",
+					len, i + 1);
+				sd->sof_read = 0;
+				return m + i + 1;
+			}
+		} else {
+			sd->sof_read = 0;
+		}
+	}
+
+	return NULL;
+}
-- 
GitLab


From 221e7dbe55fe515ff786142bac64b507fa9f26de Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:14 -0300
Subject: [PATCH 736/869] V4L/DVB (8813): gspca: Adjust SOF detection for
 pac73xx.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/pac7311.c | 18 ------------------
 1 file changed, 18 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index bed04cc9a58..3c5142852f2 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -70,7 +70,6 @@ struct sd {
 #define SENSOR_PAC7311 1
 
 	u8 sof_read;
-	u8 header_read;
 	u8 autogain_ignore_frames;
 
 	atomic_t avg_lum;
@@ -709,8 +708,6 @@ static const unsigned char pac7311_jpeg_header2[] = {
 /* Include pac common sof detection functions */
 #include "pac_common.h"
 
-#define HEADER_LENGTH 2
-
 /* this function is run at interrupt level */
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
@@ -784,22 +781,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 		gspca_frame_add(gspca_dev, INTER_PACKET, frame, tmpbuf, 4);
 		gspca_frame_add(gspca_dev, INTER_PACKET, frame,
 			pac7311_jpeg_header2, sizeof(pac7311_jpeg_header2));
-
-		sd->header_read = 0;
 	}
-
-	if (sd->header_read < HEADER_LENGTH) {
-		/* skip the variable part of the sof header */
-		int needed = HEADER_LENGTH - sd->header_read;
-		if (len <= needed) {
-			sd->header_read += len;
-			return;
-		}
-		data += needed;
-		len -= needed;
-		sd->header_read = HEADER_LENGTH;
-	}
-
 	gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
 }
 
-- 
GitLab


From f50ba1bed3cfd65d6899afc4cb77299ee5c297ae Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:14 -0300
Subject: [PATCH 737/869] V4L/DVB (8814): gspca: Set DISABLED the disabled
 controls at query control time.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/etoms.c   |  2 ++
 drivers/media/video/gspca/gspca.c   | 33 +++++++++++++++++------------
 drivers/media/video/gspca/gspca.h   |  1 +
 drivers/media/video/gspca/pac7311.c |  4 ++++
 drivers/media/video/gspca/sonixj.c  | 25 +++++++++++++---------
 drivers/media/video/gspca/vc032x.c  |  3 +++
 drivers/media/video/gspca/zc3xx.c   | 16 ++++++++++++++
 7 files changed, 61 insertions(+), 23 deletions(-)

diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index a3cccab7b81..e5a9eee673a 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -81,6 +81,7 @@ static struct ctrl sd_ctrls[] = {
 	 .set = sd_setcontrast,
 	 .get = sd_getcontrast,
 	 },
+#define COLOR_IDX 2
 	{
 	 {
 	  .id = V4L2_CID_SATURATION,
@@ -665,6 +666,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	} else {
 		cam->cam_mode = vga_mode;
 		cam->nmodes = sizeof vga_mode / sizeof vga_mode[0];
+		gspca_dev->ctrl_dis = (1 << COLOR_IDX);
 	}
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 28842ed24c0..33161e1e0bc 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -856,37 +856,44 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	return 0;
 }
 
-/* the use of V4L2_CTRL_FLAG_NEXT_CTRL asks for the controls to be sorted */
 static int vidioc_queryctrl(struct file *file, void *priv,
 			   struct v4l2_queryctrl *q_ctrl)
 {
 	struct gspca_dev *gspca_dev = priv;
-	int i;
+	int i, ix;
 	u32 id;
 
+	ix = -1;
 	id = q_ctrl->id;
 	if (id & V4L2_CTRL_FLAG_NEXT_CTRL) {
 		id &= V4L2_CTRL_ID_MASK;
 		id++;
 		for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
-			if (id >= gspca_dev->sd_desc->ctrls[i].qctrl.id) {
-				memcpy(q_ctrl,
-					&gspca_dev->sd_desc->ctrls[i].qctrl,
-					sizeof *q_ctrl);
-				return 0;
+			if (id < gspca_dev->sd_desc->ctrls[i].qctrl.id)
+				continue;
+			if (ix < 0) {
+				ix = i;
+				continue;
 			}
+			if (gspca_dev->sd_desc->ctrls[i].qctrl.id
+				    > gspca_dev->sd_desc->ctrls[ix].qctrl.id)
+				continue;
+			ix = i;
 		}
-		return -EINVAL;
 	}
 	for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
 		if (id == gspca_dev->sd_desc->ctrls[i].qctrl.id) {
-			memcpy(q_ctrl,
-				&gspca_dev->sd_desc->ctrls[i].qctrl,
-				sizeof *q_ctrl);
-			return 0;
+			ix = i;
+			break;
 		}
 	}
-	return -EINVAL;
+	if (ix < 0)
+		return -EINVAL;
+	memcpy(q_ctrl, &gspca_dev->sd_desc->ctrls[ix].qctrl,
+		sizeof *q_ctrl);
+	if (gspca_dev->ctrl_dis & (1 << ix))
+		q_ctrl->flags |= V4L2_CTRL_FLAG_DISABLED;
+	return 0;
 }
 
 static int vidioc_s_ctrl(struct file *file, void *priv,
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 2596568e82f..a804ef18b8d 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -126,6 +126,7 @@ struct gspca_dev {
 
 	struct cam cam;				/* device information */
 	const struct sd_desc *sd_desc;		/* subdriver description */
+	unsigned ctrl_dis;		/* disabled controls (bit map) */
 
 	__u8 usb_buf[8];			/* buffer for USB exchanges */
 	struct urb *urb[MAX_NURBS];
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 3c5142852f2..69d610062d0 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -150,6 +150,7 @@ static struct ctrl sd_ctrls[] = {
 	    .get = sd_getautogain,
 	},
 /* next controls work with pac7302 only */
+#define HFLIP_IDX 4
 	{
 	    {
 		.id      = V4L2_CID_HFLIP,
@@ -164,6 +165,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_sethflip,
 	    .get = sd_gethflip,
 	},
+#define VFLIP_IDX 5
 	{
 	    {
 		.id      = V4L2_CID_VFLIP,
@@ -467,6 +469,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 		cam->cam_mode = vga_mode;
 		cam->nmodes = ARRAY_SIZE(vga_mode);
+		gspca_dev->ctrl_dis = (1 << HFLIP_IDX)
+				| (1 << VFLIP_IDX);
 	}
 
 	sd->brightness = BRIGHTNESS_DEF;
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 0d4677688c9..e657b8ba6db 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -116,6 +116,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setcolors,
 	    .get = sd_getcolors,
 	},
+#define AUTOGAIN_IDX 3
 	{
 	    {
 		.id      = V4L2_CID_AUTOGAIN,
@@ -936,6 +937,14 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->autogain = AUTOGAIN_DEF;
 	sd->ag_cnt = -1;
 
+	switch (sd->sensor) {
+	case SENSOR_OV7630:
+	case SENSOR_OV7648:
+	case SENSOR_OV7660:
+		gspca_dev->ctrl_dis = (1 << AUTOGAIN_IDX);
+		break;
+	}
+
 	return 0;
 }
 
@@ -1150,16 +1159,12 @@ static void setautogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
-	switch (sd->sensor) {
-	case SENSOR_HV7131R:
-	case SENSOR_MO4000:
-	case SENSOR_MI0360:
-		if (sd->autogain)
-			sd->ag_cnt = AG_CNT_START;
-		else
-			sd->ag_cnt = -1;
-		break;
-	}
+	if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+		return;
+	if (sd->autogain)
+		sd->ag_cnt = AG_CNT_START;
+	else
+		sd->ag_cnt = -1;
 }
 
 /* -- start the camera -- */
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 47c7ce641d9..5454f0eb007 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -69,6 +69,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setautogain,
 	    .get = sd_getautogain,
 	},
+#define LIGHTFREQ_IDX 1
 	{
 	    {
 		.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
@@ -1463,6 +1464,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->qindex = 7;
 	sd->autogain = AUTOGAIN_DEF;
 	sd->lightfreq = FREQ_DEF;
+	if (sd->sensor != SENSOR_OV7670)
+		gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
 
 	if (sd->bridge == BRIDGE_VC0321) {
 		reg_r(gspca_dev, 0x8a, 0, 3);
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 79436f27cd4..e78b9b7591d 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -85,6 +85,7 @@ static int sd_setsharpness(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getsharpness(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
 #define SD_BRIGHTNESS 0
 	{
 	    {
@@ -141,6 +142,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setautogain,
 	    .get = sd_getautogain,
 	},
+#define LIGHTFREQ_IDX 4
 #define SD_FREQ 4
 	{
 	    {
@@ -7150,6 +7152,20 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->lightfreq = sd_ctrls[SD_FREQ].qctrl.default_value;
 	sd->sharpness = sd_ctrls[SD_SHARPNESS].qctrl.default_value;
 
+	switch (sd->sensor) {
+	case SENSOR_GC0305:
+	case SENSOR_OV7620:
+	case SENSOR_PO2030:
+		gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX);
+		break;
+	case SENSOR_HDCS2020:
+	case SENSOR_HV7131B:
+	case SENSOR_HV7131C:
+	case SENSOR_OV7630C:
+		gspca_dev->ctrl_dis = (1 << LIGHTFREQ_IDX);
+		break;
+	}
+
 	/* switch the led off */
 	reg_w(gspca_dev->dev, 0x01, 0x0000);
 	return 0;
-- 
GitLab


From 0f523c2ff6b5ab3b4412cf56dee77ac57be24103 Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:14 -0300
Subject: [PATCH 738/869] V4L/DVB (8815): gspca: Fix problems with disabled
 controls.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 33161e1e0bc..e7e73ec7134 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -869,7 +869,7 @@ static int vidioc_queryctrl(struct file *file, void *priv,
 		id &= V4L2_CTRL_ID_MASK;
 		id++;
 		for (i = 0; i < gspca_dev->sd_desc->nctrls; i++) {
-			if (id < gspca_dev->sd_desc->ctrls[i].qctrl.id)
+			if (gspca_dev->sd_desc->ctrls[i].qctrl.id < id)
 				continue;
 			if (ix < 0) {
 				ix = i;
@@ -908,6 +908,8 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 	     i++, ctrls++) {
 		if (ctrl->id != ctrls->qctrl.id)
 			continue;
+		if (gspca_dev->ctrl_dis & (1 << i))
+			return -EINVAL;
 		if (ctrl->value < ctrls->qctrl.minimum
 		    || ctrl->value > ctrls->qctrl.maximum)
 			return -ERANGE;
@@ -934,6 +936,8 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 	     i++, ctrls++) {
 		if (ctrl->id != ctrls->qctrl.id)
 			continue;
+		if (gspca_dev->ctrl_dis & (1 << i))
+			return -EINVAL;
 		if (mutex_lock_interruptible(&gspca_dev->usb_lock))
 			return -ERESTARTSYS;
 		ret = ctrls->get(gspca_dev, &ctrl->value);
-- 
GitLab


From e2ad2a54ad1e0f8d7c9e49c38b552a630e015af3 Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:15 -0300
Subject: [PATCH 739/869] V4L/DVB (8816): gspca: Set disabled ctrls and fix a
 register pb with ovxxxx in sonixb.

- set some controls as disabled instead of copying the device descr.
- in the ov6650 / 7650 exposure code clamp reg 11 before (instead of after)
  using it to calculate reg 10.
- disable brightness (instead of ignoring it) for the TAS5110.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c | 80 +++++++++++++++---------------
 1 file changed, 40 insertions(+), 40 deletions(-)

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index e535ced79f1..735d4260f2f 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -31,9 +31,6 @@ MODULE_LICENSE("GPL");
 /* specific webcam descriptor */
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
-
-	struct sd_desc sd_desc;		/* our nctrls differ dependend upon the
-					   sensor, so we use a per cam copy */
 	atomic_t avg_lum;
 
 	unsigned char gain;
@@ -60,9 +57,8 @@ struct sd {
 
 /* flags used in the device id table */
 #define F_GAIN 0x01		/* has gain */
-#define F_AUTO 0x02		/* has autogain */
-#define F_SIF  0x04		/* sif or vga */
-#define F_H18  0x08		/* long (18 b) or short (12 b) frame header */
+#define F_SIF  0x02		/* sif or vga */
+#define F_H18  0x04		/* long (18 b) or short (12 b) frame header */
 
 #define COMP2 0x8f
 #define COMP 0xc7		/* 0x87 //0x07 */
@@ -95,6 +91,7 @@ static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
+#define BRIGHTNESS_IDX 0
 	{
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
@@ -109,6 +106,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setbrightness,
 	    .get = sd_getbrightness,
 	},
+#define GAIN_IDX 1
 	{
 	    {
 		.id      = V4L2_CID_GAIN,
@@ -124,6 +122,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setgain,
 	    .get = sd_getgain,
 	},
+#define EXPOSURE_IDX 2
 	{
 		{
 			.id = V4L2_CID_EXPOSURE,
@@ -140,6 +139,7 @@ static struct ctrl sd_ctrls[] = {
 		.set = sd_setexposure,
 		.get = sd_getexposure,
 	},
+#define AUTOGAIN_IDX 3
 	{
 		{
 			.id = V4L2_CID_AUTOGAIN,
@@ -155,6 +155,7 @@ static struct ctrl sd_ctrls[] = {
 		.set = sd_setautogain,
 		.get = sd_getautogain,
 	},
+#define FREQ_IDX 4
 	{
 		{
 			.id	 = V4L2_CID_POWER_LINE_FREQUENCY,
@@ -545,9 +546,6 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 			goto err;
 		break;
 	    }
-	case SENSOR_TAS5110:
-		/* FIXME figure out howto control brightness on TAS5110 */
-		break;
 	}
 	return;
 err:
@@ -665,6 +663,11 @@ static void setexposure(struct gspca_dev *gspca_dev)
 		else if (reg11 > 16)
 			reg11 = 16;
 
+		/* In 640x480, if the reg11 has less than 3, the image is
+		   unstable (not enough bandwidth). */
+		if (gspca_dev->width == 640 && reg11 < 3)
+			reg11 = 3;
+
 		/* frame exposure time in ms = 1000 * reg11 / 30    ->
 		reg10 = sd->exposure * 2 * reg10_max / (1000 * reg11 / 30) */
 		reg10 = (sd->exposure * 60 * reg10_max) / (1000 * reg11);
@@ -678,11 +681,6 @@ static void setexposure(struct gspca_dev *gspca_dev)
 		else if (reg10 > reg10_max)
 			reg10 = reg10_max;
 
-		/* In 640x480, if the reg11 has less than 3, the image is
-		   unstable (not enough bandwidth). */
-		if (gspca_dev->width == 640 && reg11 < 3)
-			reg11 = 3;
-
 		/* Write reg 10 and reg11 low nibble */
 		i2c[1] = sd->sensor_addr;
 		i2c[3] = reg10;
@@ -759,23 +757,17 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct cam *cam;
 	int sif = 0;
 
-	/* nctrls depends upon the sensor, so we use a per cam copy */
-	memcpy(&sd->sd_desc, gspca_dev->sd_desc, sizeof(struct sd_desc));
-	gspca_dev->sd_desc = &sd->sd_desc;
-
 	/* copy the webcam info from the device id */
 	sd->sensor = (id->driver_info >> 24) & 0xff;
 	if (id->driver_info & (F_GAIN << 16))
 		sd->sensor_has_gain = 1;
-	if (id->driver_info & (F_AUTO << 16))
-		sd->sd_desc.dq_callback = do_autogain;
 	if (id->driver_info & (F_SIF << 16))
 		sif = 1;
 	if (id->driver_info & (F_H18 << 16))
 		sd->fr_h_sz = 18;		/* size of frame header */
 	else
 		sd->fr_h_sz = 12;
-	sd->sd_desc.nctrls = (id->driver_info >> 8) & 0xff;
+	gspca_dev->ctrl_dis = (id->driver_info >> 8) & 0xff;
 	sd->sensor_addr = id->driver_info & 0xff;
 
 	cam = &gspca_dev->cam;
@@ -790,7 +782,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->gain = GAIN_DEF;
 	sd->exposure = EXPOSURE_DEF;
-	sd->autogain = AUTOGAIN_DEF;
+	if (gspca_dev->ctrl_dis & (1 << AUTOGAIN_IDX))
+		sd->autogain = 0; /* Disable do_autogain callback */
+	else
+		sd->autogain = AUTOGAIN_DEF;
 	sd->freq = FREQ_DEF;
 
 	return 0;
@@ -1169,50 +1164,55 @@ static const struct sd_desc sd_desc = {
 	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
+	.dq_callback = do_autogain,
 };
 
 /* -- module initialisation -- */
-#define SFCI(sensor, flags, nctrls, i2c_addr) \
+#define SFCI(sensor, flags, disable_ctrls, i2c_addr) \
 	.driver_info = (SENSOR_ ## sensor << 24) \
 			| ((flags) << 16) \
-			| ((nctrls) << 8) \
+			| ((disable_ctrls) << 8) \
 			| (i2c_addr)
+#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
+#define NO_FREQ (1 << FREQ_IDX)
+#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
+
 static __devinitdata struct usb_device_id device_table[] = {
 #ifndef CONFIG_USB_SN9C102
 	{USB_DEVICE(0x0c45, 0x6001),			/* SN9C102 */
-			SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
+			SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x6005),			/* SN9C101 */
-			SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
+			SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x6007),			/* SN9C101 */
-			SFCI(TAS5110, F_GAIN|F_AUTO|F_SIF, 4, 0)},
+			SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x6009),			/* SN9C101 */
-			SFCI(PAS106, F_SIF, 2, 0)},
+			SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x600d),			/* SN9C101 */
-			SFCI(PAS106, F_SIF, 2, 0)},
+			SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
 #endif
 	{USB_DEVICE(0x0c45, 0x6011),		/* SN9C101 - SN9C101G */
-			SFCI(OV6650, F_GAIN|F_AUTO|F_SIF, 5, 0x60)},
+			SFCI(OV6650, F_GAIN|F_SIF, 0, 0x60)},
 #ifndef CONFIG_USB_SN9C102
 	{USB_DEVICE(0x0c45, 0x6019),			/* SN9C101 */
-			SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
+			SFCI(OV7630, F_GAIN, 0, 0x21)},
 	{USB_DEVICE(0x0c45, 0x6024),			/* SN9C102 */
-			SFCI(TAS5130CXX, 0, 2, 0)},
+			SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x6025),			/* SN9C102 */
-			SFCI(TAS5130CXX, 0, 2, 0)},
+			SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x6028),			/* SN9C102 */
-			SFCI(PAS202, 0, 2, 0)},
+			SFCI(PAS202, 0, NO_EXPO|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x6029),			/* SN9C101 */
-			SFCI(PAS106, F_SIF, 2, 0)},
+			SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x602c),			/* SN9C102 */
-			SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
+			SFCI(OV7630, F_GAIN, 0, 0x21)},
 	{USB_DEVICE(0x0c45, 0x602d),			/* SN9C102 */
-			SFCI(HV7131R, 0, 2, 0)},
+			SFCI(HV7131R, 0, NO_EXPO|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x602e),			/* SN9C102 */
-			SFCI(OV7630, F_GAIN|F_AUTO, 5, 0x21)},
+			SFCI(OV7630, F_GAIN, 0, 0x21)},
 	{USB_DEVICE(0x0c45, 0x60af),			/* SN9C103 */
-			SFCI(PAS202, F_H18, 2, 0)},
+			SFCI(PAS202, F_H18, NO_EXPO|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x60b0),			/* SN9C103 */
-			SFCI(OV7630, F_GAIN|F_AUTO|F_H18, 5, 0x21)},
+			SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
 #endif
 	{}
 };
-- 
GitLab


From 65f33396ab57f3346fb07ddee8e3aa616d13386c Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:15 -0300
Subject: [PATCH 740/869] V4L/DVB (8817): gspca: LED and proble changes in
 sonixb.

- turn the led of the cam off after plugging in the cam
- move the probe code from open to config, so that if the probe fails
  we never register

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 735d4260f2f..64aae060a93 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -756,6 +756,11 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 	int sif = 0;
+	const __u8 stop = 0x09; /* Disable stream turn of LED */
+
+	reg_r(gspca_dev, 0x00);
+	if (gspca_dev->usb_buf[0] != 0x10)
+		return -ENODEV;
 
 	/* copy the webcam info from the device id */
 	sd->sensor = (id->driver_info >> 24) & 0xff;
@@ -788,15 +793,15 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		sd->autogain = AUTOGAIN_DEF;
 	sd->freq = FREQ_DEF;
 
+	/* Disable stream turn of LED */
+	reg_w(gspca_dev, 0x01, &stop, 1);
+
 	return 0;
 }
 
 /* this function is called at open time */
 static int sd_open(struct gspca_dev *gspca_dev)
 {
-	reg_r(gspca_dev, 0x00);
-	if (gspca_dev->usb_buf[0] != 0x10)
-		return -ENODEV;
 	return 0;
 }
 
-- 
GitLab


From 1e89e2da48070da8ac221c37fea8fa82da127c34 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:15 -0300
Subject: [PATCH 741/869] V4L/DVB (8818): gspca: Reinitialize the device on
 resume.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index e7e73ec7134..1767991c1f4 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1838,9 +1838,12 @@ int gspca_resume(struct usb_interface *intf)
 	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
 
 	gspca_dev->frozen = 0;
-	if (!gspca_dev->streaming)
-		return 0;
-	return gspca_init_transfer(gspca_dev);
+	if (gspca_dev->users != 0) {
+		gspca_dev->sd_desc->open(gspca_dev);
+		if (gspca_dev->streaming)
+			return gspca_init_transfer(gspca_dev);
+	}
+	return 0;
 }
 EXPORT_SYMBOL(gspca_resume);
 #endif
-- 
GitLab


From 4202f71ca1e52d73cab14f3695fdef6b6f010a0b Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:15 -0300
Subject: [PATCH 742/869] V4L/DVB (8819): gspca: Initialize the ov519 at open
 time and source cleanup.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 1142 +++++++++++++++--------------
 1 file changed, 596 insertions(+), 546 deletions(-)

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index c132f8d2cf0..4062aed2413 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -63,11 +63,10 @@ struct sd {
 #define SEN_OV6630 2
 #define SEN_OV7610 3
 #define SEN_OV7620 4
-#define SEN_OV7630 5
-#define SEN_OV7640 6
-#define SEN_OV7670 7
-#define SEN_OV76BE 8
-#define SEN_OV8610 9
+#define SEN_OV7640 5
+#define SEN_OV7670 6
+#define SEN_OV76BE 7
+#define SEN_OV8610 8
 
 };
 
@@ -293,6 +292,541 @@ static struct v4l2_pix_format sif_mode[] = {
 #define OV7670_REG_HAECC7      0xaa    /* Hist AEC/AGC control 7 */
 #define OV7670_REG_BD60MAX     0xab    /* 60hz banding step limit */
 
+struct ov_regvals {
+	__u8 reg;
+	__u8 val;
+};
+struct ov_i2c_regvals {
+	__u8 reg;
+	__u8 val;
+};
+
+static const struct ov_i2c_regvals norm_6x20[] = {
+	{ 0x12, 0x80 }, /* reset */
+	{ 0x11, 0x01 },
+	{ 0x03, 0x60 },
+	{ 0x05, 0x7f }, /* For when autoadjust is off */
+	{ 0x07, 0xa8 },
+	/* The ratio of 0x0c and 0x0d  controls the white point */
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+	{ 0x0f, 0x15 }, /* COMS */
+	{ 0x10, 0x75 }, /* AEC Exposure time */
+	{ 0x12, 0x24 }, /* Enable AGC */
+	{ 0x14, 0x04 },
+	/* 0x16: 0x06 helps frame stability with moving objects */
+	{ 0x16, 0x06 },
+/*	{ 0x20, 0x30 },  * Aperture correction enable */
+	{ 0x26, 0xb2 }, /* BLC enable */
+	/* 0x28: 0x05 Selects RGB format if RGB on */
+	{ 0x28, 0x05 },
+	{ 0x2a, 0x04 }, /* Disable framerate adjust */
+/*	{ 0x2b, 0xac },  * Framerate; Set 2a[7] first */
+	{ 0x2d, 0x99 },
+	{ 0x33, 0xa0 }, /* Color Processing Parameter */
+	{ 0x34, 0xd2 }, /* Max A/D range */
+	{ 0x38, 0x8b },
+	{ 0x39, 0x40 },
+
+	{ 0x3c, 0x39 }, /* Enable AEC mode changing */
+	{ 0x3c, 0x3c }, /* Change AEC mode */
+	{ 0x3c, 0x24 }, /* Disable AEC mode changing */
+
+	{ 0x3d, 0x80 },
+	/* These next two registers (0x4a, 0x4b) are undocumented.
+	 * They control the color balance */
+	{ 0x4a, 0x80 },
+	{ 0x4b, 0x80 },
+	{ 0x4d, 0xd2 }, /* This reduces noise a bit */
+	{ 0x4e, 0xc1 },
+	{ 0x4f, 0x04 },
+/* Do 50-53 have any effect? */
+/* Toggle 0x12[2] off and on here? */
+};
+
+static const struct ov_i2c_regvals norm_6x30[] = {
+	{ 0x12, 0x80 }, /* Reset */
+	{ 0x00, 0x1f }, /* Gain */
+	{ 0x01, 0x99 }, /* Blue gain */
+	{ 0x02, 0x7c }, /* Red gain */
+	{ 0x03, 0xc0 }, /* Saturation */
+	{ 0x05, 0x0a }, /* Contrast */
+	{ 0x06, 0x95 }, /* Brightness */
+	{ 0x07, 0x2d }, /* Sharpness */
+	{ 0x0c, 0x20 },
+	{ 0x0d, 0x20 },
+	{ 0x0e, 0x20 },
+	{ 0x0f, 0x05 },
+	{ 0x10, 0x9a },
+	{ 0x11, 0x00 }, /* Pixel clock = fastest */
+	{ 0x12, 0x24 }, /* Enable AGC and AWB */
+	{ 0x13, 0x21 },
+	{ 0x14, 0x80 },
+	{ 0x15, 0x01 },
+	{ 0x16, 0x03 },
+	{ 0x17, 0x38 },
+	{ 0x18, 0xea },
+	{ 0x19, 0x04 },
+	{ 0x1a, 0x93 },
+	{ 0x1b, 0x00 },
+	{ 0x1e, 0xc4 },
+	{ 0x1f, 0x04 },
+	{ 0x20, 0x20 },
+	{ 0x21, 0x10 },
+	{ 0x22, 0x88 },
+	{ 0x23, 0xc0 }, /* Crystal circuit power level */
+	{ 0x25, 0x9a }, /* Increase AEC black ratio */
+	{ 0x26, 0xb2 }, /* BLC enable */
+	{ 0x27, 0xa2 },
+	{ 0x28, 0x00 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x84 }, /* 60 Hz power */
+	{ 0x2b, 0xa8 }, /* 60 Hz power */
+	{ 0x2c, 0xa0 },
+	{ 0x2d, 0x95 }, /* Enable auto-brightness */
+	{ 0x2e, 0x88 },
+	{ 0x33, 0x26 },
+	{ 0x34, 0x03 },
+	{ 0x36, 0x8f },
+	{ 0x37, 0x80 },
+	{ 0x38, 0x83 },
+	{ 0x39, 0x80 },
+	{ 0x3a, 0x0f },
+	{ 0x3b, 0x3c },
+	{ 0x3c, 0x1a },
+	{ 0x3d, 0x80 },
+	{ 0x3e, 0x80 },
+	{ 0x3f, 0x0e },
+	{ 0x40, 0x00 }, /* White bal */
+	{ 0x41, 0x00 }, /* White bal */
+	{ 0x42, 0x80 },
+	{ 0x43, 0x3f }, /* White bal */
+	{ 0x44, 0x80 },
+	{ 0x45, 0x20 },
+	{ 0x46, 0x20 },
+	{ 0x47, 0x80 },
+	{ 0x48, 0x7f },
+	{ 0x49, 0x00 },
+	{ 0x4a, 0x00 },
+	{ 0x4b, 0x80 },
+	{ 0x4c, 0xd0 },
+	{ 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
+	{ 0x4e, 0x40 },
+	{ 0x4f, 0x07 }, /* UV avg., col. killer: max */
+	{ 0x50, 0xff },
+	{ 0x54, 0x23 }, /* Max AGC gain: 18dB */
+	{ 0x55, 0xff },
+	{ 0x56, 0x12 },
+	{ 0x57, 0x81 },
+	{ 0x58, 0x75 },
+	{ 0x59, 0x01 }, /* AGC dark current comp.: +1 */
+	{ 0x5a, 0x2c },
+	{ 0x5b, 0x0f }, /* AWB chrominance levels */
+	{ 0x5c, 0x10 },
+	{ 0x3d, 0x80 },
+	{ 0x27, 0xa6 },
+	{ 0x12, 0x20 }, /* Toggle AWB */
+	{ 0x12, 0x24 },
+};
+
+/* Lawrence Glaister <lg@jfm.bc.ca> reports:
+ *
+ * Register 0x0f in the 7610 has the following effects:
+ *
+ * 0x85 (AEC method 1): Best overall, good contrast range
+ * 0x45 (AEC method 2): Very overexposed
+ * 0xa5 (spec sheet default): Ok, but the black level is
+ *	shifted resulting in loss of contrast
+ * 0x05 (old driver setting): very overexposed, too much
+ *	contrast
+ */
+static const struct ov_i2c_regvals norm_7610[] = {
+	{ 0x10, 0xff },
+	{ 0x16, 0x06 },
+	{ 0x28, 0x24 },
+	{ 0x2b, 0xac },
+	{ 0x12, 0x00 },
+	{ 0x38, 0x81 },
+	{ 0x28, 0x24 },	/* 0c */
+	{ 0x0f, 0x85 },	/* lg's setting */
+	{ 0x15, 0x01 },
+	{ 0x20, 0x1c },
+	{ 0x23, 0x2a },
+	{ 0x24, 0x10 },
+	{ 0x25, 0x8a },
+	{ 0x26, 0xa2 },
+	{ 0x27, 0xc2 },
+	{ 0x2a, 0x04 },
+	{ 0x2c, 0xfe },
+	{ 0x2d, 0x93 },
+	{ 0x30, 0x71 },
+	{ 0x31, 0x60 },
+	{ 0x32, 0x26 },
+	{ 0x33, 0x20 },
+	{ 0x34, 0x48 },
+	{ 0x12, 0x24 },
+	{ 0x11, 0x01 },
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+};
+
+static const struct ov_i2c_regvals norm_7620[] = {
+	{ 0x00, 0x00 },		/* gain */
+	{ 0x01, 0x80 },		/* blue gain */
+	{ 0x02, 0x80 },		/* red gain */
+	{ 0x03, 0xc0 },		/* OV7670_REG_VREF */
+	{ 0x06, 0x60 },
+	{ 0x07, 0x00 },
+	{ 0x0c, 0x24 },
+	{ 0x0c, 0x24 },
+	{ 0x0d, 0x24 },
+	{ 0x11, 0x01 },
+	{ 0x12, 0x24 },
+	{ 0x13, 0x01 },
+	{ 0x14, 0x84 },
+	{ 0x15, 0x01 },
+	{ 0x16, 0x03 },
+	{ 0x17, 0x2f },
+	{ 0x18, 0xcf },
+	{ 0x19, 0x06 },
+	{ 0x1a, 0xf5 },
+	{ 0x1b, 0x00 },
+	{ 0x20, 0x18 },
+	{ 0x21, 0x80 },
+	{ 0x22, 0x80 },
+	{ 0x23, 0x00 },
+	{ 0x26, 0xa2 },
+	{ 0x27, 0xea },
+	{ 0x28, 0x20 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x10 },
+	{ 0x2b, 0x00 },
+	{ 0x2c, 0x88 },
+	{ 0x2d, 0x91 },
+	{ 0x2e, 0x80 },
+	{ 0x2f, 0x44 },
+	{ 0x60, 0x27 },
+	{ 0x61, 0x02 },
+	{ 0x62, 0x5f },
+	{ 0x63, 0xd5 },
+	{ 0x64, 0x57 },
+	{ 0x65, 0x83 },
+	{ 0x66, 0x55 },
+	{ 0x67, 0x92 },
+	{ 0x68, 0xcf },
+	{ 0x69, 0x76 },
+	{ 0x6a, 0x22 },
+	{ 0x6b, 0x00 },
+	{ 0x6c, 0x02 },
+	{ 0x6d, 0x44 },
+	{ 0x6e, 0x80 },
+	{ 0x6f, 0x1d },
+	{ 0x70, 0x8b },
+	{ 0x71, 0x00 },
+	{ 0x72, 0x14 },
+	{ 0x73, 0x54 },
+	{ 0x74, 0x00 },
+	{ 0x75, 0x8e },
+	{ 0x76, 0x00 },
+	{ 0x77, 0xff },
+	{ 0x78, 0x80 },
+	{ 0x79, 0x80 },
+	{ 0x7a, 0x80 },
+	{ 0x7b, 0xe2 },
+	{ 0x7c, 0x00 },
+};
+
+/* 7640 and 7648. The defaults should be OK for most registers. */
+static const struct ov_i2c_regvals norm_7640[] = {
+	{ 0x12, 0x80 },
+	{ 0x12, 0x14 },
+};
+
+/* 7670. Defaults taken from OmniVision provided data,
+*  as provided by Jonathan Corbet of OLPC		*/
+static const struct ov_i2c_regvals norm_7670[] = {
+	{ OV7670_REG_COM7, OV7670_COM7_RESET },
+	{ OV7670_REG_TSLB, 0x04 },		/* OV */
+	{ OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
+	{ OV7670_REG_CLKRC, 0x01 },
+/*
+ * Set the hardware window.  These values from OV don't entirely
+ * make sense - hstop is less than hstart.  But they work...
+ */
+	{ OV7670_REG_HSTART, 0x13 },
+	{ OV7670_REG_HSTOP, 0x01 },
+	{ OV7670_REG_HREF, 0xb6 },
+	{ OV7670_REG_VSTART, 0x02 },
+	{ OV7670_REG_VSTOP, 0x7a },
+	{ OV7670_REG_VREF, 0x0a },
+
+	{ OV7670_REG_COM3, 0 },
+	{ OV7670_REG_COM14, 0 },
+/* Mystery scaling numbers */
+	{ 0x70, 0x3a },
+	{ 0x71, 0x35 },
+	{ 0x72, 0x11 },
+	{ 0x73, 0xf0 },
+	{ 0xa2, 0x02 },
+/*	{ OV7670_REG_COM10, 0x0 }, */
+
+/* Gamma curve values */
+	{ 0x7a, 0x20 },
+	{ 0x7b, 0x10 },
+	{ 0x7c, 0x1e },
+	{ 0x7d, 0x35 },
+	{ 0x7e, 0x5a },
+	{ 0x7f, 0x69 },
+	{ 0x80, 0x76 },
+	{ 0x81, 0x80 },
+	{ 0x82, 0x88 },
+	{ 0x83, 0x8f },
+	{ 0x84, 0x96 },
+	{ 0x85, 0xa3 },
+	{ 0x86, 0xaf },
+	{ 0x87, 0xc4 },
+	{ 0x88, 0xd7 },
+	{ 0x89, 0xe8 },
+
+/* AGC and AEC parameters.  Note we start by disabling those features,
+   then turn them only after tweaking the values. */
+	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+			 | OV7670_COM8_AECSTEP
+			 | OV7670_COM8_BFILT },
+	{ OV7670_REG_GAIN, 0 },
+	{ OV7670_REG_AECH, 0 },
+	{ OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
+	{ OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
+	{ OV7670_REG_BD50MAX, 0x05 },
+	{ OV7670_REG_BD60MAX, 0x07 },
+	{ OV7670_REG_AEW, 0x95 },
+	{ OV7670_REG_AEB, 0x33 },
+	{ OV7670_REG_VPT, 0xe3 },
+	{ OV7670_REG_HAECC1, 0x78 },
+	{ OV7670_REG_HAECC2, 0x68 },
+	{ 0xa1, 0x03 }, /* magic */
+	{ OV7670_REG_HAECC3, 0xd8 },
+	{ OV7670_REG_HAECC4, 0xd8 },
+	{ OV7670_REG_HAECC5, 0xf0 },
+	{ OV7670_REG_HAECC6, 0x90 },
+	{ OV7670_REG_HAECC7, 0x94 },
+	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+			| OV7670_COM8_AECSTEP
+			| OV7670_COM8_BFILT
+			| OV7670_COM8_AGC
+			| OV7670_COM8_AEC },
+
+/* Almost all of these are magic "reserved" values.  */
+	{ OV7670_REG_COM5, 0x61 },
+	{ OV7670_REG_COM6, 0x4b },
+	{ 0x16, 0x02 },
+	{ OV7670_REG_MVFP, 0x07 },
+	{ 0x21, 0x02 },
+	{ 0x22, 0x91 },
+	{ 0x29, 0x07 },
+	{ 0x33, 0x0b },
+	{ 0x35, 0x0b },
+	{ 0x37, 0x1d },
+	{ 0x38, 0x71 },
+	{ 0x39, 0x2a },
+	{ OV7670_REG_COM12, 0x78 },
+	{ 0x4d, 0x40 },
+	{ 0x4e, 0x20 },
+	{ OV7670_REG_GFIX, 0 },
+	{ 0x6b, 0x4a },
+	{ 0x74, 0x10 },
+	{ 0x8d, 0x4f },
+	{ 0x8e, 0 },
+	{ 0x8f, 0 },
+	{ 0x90, 0 },
+	{ 0x91, 0 },
+	{ 0x96, 0 },
+	{ 0x9a, 0 },
+	{ 0xb0, 0x84 },
+	{ 0xb1, 0x0c },
+	{ 0xb2, 0x0e },
+	{ 0xb3, 0x82 },
+	{ 0xb8, 0x0a },
+
+/* More reserved magic, some of which tweaks white balance */
+	{ 0x43, 0x0a },
+	{ 0x44, 0xf0 },
+	{ 0x45, 0x34 },
+	{ 0x46, 0x58 },
+	{ 0x47, 0x28 },
+	{ 0x48, 0x3a },
+	{ 0x59, 0x88 },
+	{ 0x5a, 0x88 },
+	{ 0x5b, 0x44 },
+	{ 0x5c, 0x67 },
+	{ 0x5d, 0x49 },
+	{ 0x5e, 0x0e },
+	{ 0x6c, 0x0a },
+	{ 0x6d, 0x55 },
+	{ 0x6e, 0x11 },
+	{ 0x6f, 0x9f },
+					/* "9e for advance AWB" */
+	{ 0x6a, 0x40 },
+	{ OV7670_REG_BLUE, 0x40 },
+	{ OV7670_REG_RED, 0x60 },
+	{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
+			| OV7670_COM8_AECSTEP
+			| OV7670_COM8_BFILT
+			| OV7670_COM8_AGC
+			| OV7670_COM8_AEC
+			| OV7670_COM8_AWB },
+
+/* Matrix coefficients */
+	{ 0x4f, 0x80 },
+	{ 0x50, 0x80 },
+	{ 0x51, 0 },
+	{ 0x52, 0x22 },
+	{ 0x53, 0x5e },
+	{ 0x54, 0x80 },
+	{ 0x58, 0x9e },
+
+	{ OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
+	{ OV7670_REG_EDGE, 0 },
+	{ 0x75, 0x05 },
+	{ 0x76, 0xe1 },
+	{ 0x4c, 0 },
+	{ 0x77, 0x01 },
+	{ OV7670_REG_COM13, OV7670_COM13_GAMMA
+			  | OV7670_COM13_UVSAT
+			  | 2},		/* was 3 */
+	{ 0x4b, 0x09 },
+	{ 0xc9, 0x60 },
+	{ OV7670_REG_COM16, 0x38 },
+	{ 0x56, 0x40 },
+
+	{ 0x34, 0x11 },
+	{ OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
+	{ 0xa4, 0x88 },
+	{ 0x96, 0 },
+	{ 0x97, 0x30 },
+	{ 0x98, 0x20 },
+	{ 0x99, 0x30 },
+	{ 0x9a, 0x84 },
+	{ 0x9b, 0x29 },
+	{ 0x9c, 0x03 },
+	{ 0x9d, 0x4c },
+	{ 0x9e, 0x3f },
+	{ 0x78, 0x04 },
+
+/* Extra-weird stuff.  Some sort of multiplexor register */
+	{ 0x79, 0x01 },
+	{ 0xc8, 0xf0 },
+	{ 0x79, 0x0f },
+	{ 0xc8, 0x00 },
+	{ 0x79, 0x10 },
+	{ 0xc8, 0x7e },
+	{ 0x79, 0x0a },
+	{ 0xc8, 0x80 },
+	{ 0x79, 0x0b },
+	{ 0xc8, 0x01 },
+	{ 0x79, 0x0c },
+	{ 0xc8, 0x0f },
+	{ 0x79, 0x0d },
+	{ 0xc8, 0x20 },
+	{ 0x79, 0x09 },
+	{ 0xc8, 0x80 },
+	{ 0x79, 0x02 },
+	{ 0xc8, 0xc0 },
+	{ 0x79, 0x03 },
+	{ 0xc8, 0x40 },
+	{ 0x79, 0x05 },
+	{ 0xc8, 0x30 },
+	{ 0x79, 0x26 },
+};
+
+static const struct ov_i2c_regvals norm_8610[] = {
+	{ 0x12, 0x80 },
+	{ 0x00, 0x00 },
+	{ 0x01, 0x80 },
+	{ 0x02, 0x80 },
+	{ 0x03, 0xc0 },
+	{ 0x04, 0x30 },
+	{ 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */
+	{ 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */
+	{ 0x0a, 0x86 },
+	{ 0x0b, 0xb0 },
+	{ 0x0c, 0x20 },
+	{ 0x0d, 0x20 },
+	{ 0x11, 0x01 },
+	{ 0x12, 0x25 },
+	{ 0x13, 0x01 },
+	{ 0x14, 0x04 },
+	{ 0x15, 0x01 }, /* Lin and Win think different about UV order */
+	{ 0x16, 0x03 },
+	{ 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */
+	{ 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */
+	{ 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */
+	{ 0x1a, 0xf5 },
+	{ 0x1b, 0x00 },
+	{ 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */
+	{ 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */
+	{ 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */
+	{ 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */
+	{ 0x26, 0xa2 },
+	{ 0x27, 0xea },
+	{ 0x28, 0x00 },
+	{ 0x29, 0x00 },
+	{ 0x2a, 0x80 },
+	{ 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */
+	{ 0x2c, 0xac },
+	{ 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */
+	{ 0x2e, 0x80 },
+	{ 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */
+	{ 0x4c, 0x00 },
+	{ 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */
+	{ 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */
+	{ 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */
+	{ 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
+	{ 0x63, 0xff },
+	{ 0x64, 0x53 }, /* new windrv 090403 says 0x57,
+			 * maybe thats wrong */
+	{ 0x65, 0x00 },
+	{ 0x66, 0x55 },
+	{ 0x67, 0xb0 },
+	{ 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */
+	{ 0x69, 0x02 },
+	{ 0x6a, 0x22 },
+	{ 0x6b, 0x00 },
+	{ 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but
+			 * deleting bit7 colors the first images red */
+	{ 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */
+	{ 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */
+	{ 0x6f, 0x01 },
+	{ 0x70, 0x8b },
+	{ 0x71, 0x00 },
+	{ 0x72, 0x14 },
+	{ 0x73, 0x54 },
+	{ 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */
+	{ 0x75, 0x0e },
+	{ 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */
+	{ 0x77, 0xff },
+	{ 0x78, 0x80 },
+	{ 0x79, 0x80 },
+	{ 0x7a, 0x80 },
+	{ 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */
+	{ 0x7c, 0x00 },
+	{ 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */
+	{ 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */
+	{ 0x7f, 0xfb },
+	{ 0x80, 0x28 },
+	{ 0x81, 0x00 },
+	{ 0x82, 0x23 },
+	{ 0x83, 0x0b },
+	{ 0x84, 0x00 },
+	{ 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */
+	{ 0x86, 0xc9 },
+	{ 0x87, 0x00 },
+	{ 0x88, 0x00 },
+	{ 0x89, 0x01 },
+	{ 0x12, 0x20 },
+	{ 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */
+};
+
 static unsigned char ov7670_abs_to_sm(unsigned char v)
 {
 	if (v > 127)
@@ -537,18 +1071,10 @@ static int ov51x_set_slave_ids(struct sd *sd,
 	rc = reg_w(sd, R51x_I2C_W_SID, slave);
 	if (rc < 0)
 		return rc;
+	sd->primary_i2c_slave = slave;
 	return reg_w(sd, R51x_I2C_R_SID, slave + 1);
 }
 
-struct ov_regvals {
-	__u8 reg;
-	__u8 val;
-};
-struct ov_i2c_regvals {
-	__u8 reg;
-	__u8 val;
-};
-
 static int write_regvals(struct sd *sd,
 			 const struct ov_regvals *regvals,
 			 int n)
@@ -591,101 +1117,9 @@ static int write_i2c_regvals(struct sd *sd,
 static int ov8xx0_configure(struct sd *sd)
 {
 	int rc;
-	static const struct ov_i2c_regvals norm_8610[] = {
-		{ 0x12, 0x80 },
-		{ 0x00, 0x00 },
-		{ 0x01, 0x80 },
-		{ 0x02, 0x80 },
-		{ 0x03, 0xc0 },
-		{ 0x04, 0x30 },
-		{ 0x05, 0x30 }, /* was 0x10, new from windrv 090403 */
-		{ 0x06, 0x70 }, /* was 0x80, new from windrv 090403 */
-		{ 0x0a, 0x86 },
-		{ 0x0b, 0xb0 },
-		{ 0x0c, 0x20 },
-		{ 0x0d, 0x20 },
-		{ 0x11, 0x01 },
-		{ 0x12, 0x25 },
-		{ 0x13, 0x01 },
-		{ 0x14, 0x04 },
-		{ 0x15, 0x01 }, /* Lin and Win think different about UV order */
-		{ 0x16, 0x03 },
-		{ 0x17, 0x38 }, /* was 0x2f, new from windrv 090403 */
-		{ 0x18, 0xea }, /* was 0xcf, new from windrv 090403 */
-		{ 0x19, 0x02 }, /* was 0x06, new from windrv 090403 */
-		{ 0x1a, 0xf5 },
-		{ 0x1b, 0x00 },
-		{ 0x20, 0xd0 }, /* was 0x90, new from windrv 090403 */
-		{ 0x23, 0xc0 }, /* was 0x00, new from windrv 090403 */
-		{ 0x24, 0x30 }, /* was 0x1d, new from windrv 090403 */
-		{ 0x25, 0x50 }, /* was 0x57, new from windrv 090403 */
-		{ 0x26, 0xa2 },
-		{ 0x27, 0xea },
-		{ 0x28, 0x00 },
-		{ 0x29, 0x00 },
-		{ 0x2a, 0x80 },
-		{ 0x2b, 0xc8 }, /* was 0xcc, new from windrv 090403 */
-		{ 0x2c, 0xac },
-		{ 0x2d, 0x45 }, /* was 0xd5, new from windrv 090403 */
-		{ 0x2e, 0x80 },
-		{ 0x2f, 0x14 }, /* was 0x01, new from windrv 090403 */
-		{ 0x4c, 0x00 },
-		{ 0x4d, 0x30 }, /* was 0x10, new from windrv 090403 */
-		{ 0x60, 0x02 }, /* was 0x01, new from windrv 090403 */
-		{ 0x61, 0x00 }, /* was 0x09, new from windrv 090403 */
-		{ 0x62, 0x5f }, /* was 0xd7, new from windrv 090403 */
-		{ 0x63, 0xff },
-		{ 0x64, 0x53 }, /* new windrv 090403 says 0x57,
-				 * maybe thats wrong */
-		{ 0x65, 0x00 },
-		{ 0x66, 0x55 },
-		{ 0x67, 0xb0 },
-		{ 0x68, 0xc0 }, /* was 0xaf, new from windrv 090403 */
-		{ 0x69, 0x02 },
-		{ 0x6a, 0x22 },
-		{ 0x6b, 0x00 },
-		{ 0x6c, 0x99 }, /* was 0x80, old windrv says 0x00, but
-				   deleting bit7 colors the first images red */
-		{ 0x6d, 0x11 }, /* was 0x00, new from windrv 090403 */
-		{ 0x6e, 0x11 }, /* was 0x00, new from windrv 090403 */
-		{ 0x6f, 0x01 },
-		{ 0x70, 0x8b },
-		{ 0x71, 0x00 },
-		{ 0x72, 0x14 },
-		{ 0x73, 0x54 },
-		{ 0x74, 0x00 },/* 0x60? - was 0x00, new from windrv 090403 */
-		{ 0x75, 0x0e },
-		{ 0x76, 0x02 }, /* was 0x02, new from windrv 090403 */
-		{ 0x77, 0xff },
-		{ 0x78, 0x80 },
-		{ 0x79, 0x80 },
-		{ 0x7a, 0x80 },
-		{ 0x7b, 0x10 }, /* was 0x13, new from windrv 090403 */
-		{ 0x7c, 0x00 },
-		{ 0x7d, 0x08 }, /* was 0x09, new from windrv 090403 */
-		{ 0x7e, 0x08 }, /* was 0xc0, new from windrv 090403 */
-		{ 0x7f, 0xfb },
-		{ 0x80, 0x28 },
-		{ 0x81, 0x00 },
-		{ 0x82, 0x23 },
-		{ 0x83, 0x0b },
-		{ 0x84, 0x00 },
-		{ 0x85, 0x62 }, /* was 0x61, new from windrv 090403 */
-		{ 0x86, 0xc9 },
-		{ 0x87, 0x00 },
-		{ 0x88, 0x00 },
-		{ 0x89, 0x01 },
-		{ 0x12, 0x20 },
-		{ 0x12, 0x25 }, /* was 0x24, new from windrv 090403 */
-	};
 
 	PDEBUG(D_PROBE, "starting ov8xx0 configuration");
 
-	if (init_ov_sensor(sd) < 0)
-		PDEBUG(D_ERR|D_PROBE, "Failed to read sensor ID");
-	else
-		PDEBUG(D_PROBE, "OV86x0 initialized");
-
 	/* Detect sensor (sub)type */
 	rc = i2c_r(sd, OV7610_REG_COM_I);
 	if (rc < 0) {
@@ -698,9 +1132,6 @@ static int ov8xx0_configure(struct sd *sd)
 		PDEBUG(D_ERR, "Unknown image sensor version: %d", rc & 3);
 		return -1;
 	}
-	PDEBUG(D_PROBE, "Writing 8610 registers");
-	if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
-		return -1;
 
 	/* Set sensor-specific vars */
 /*	sd->sif = 0;		already done */
@@ -714,252 +1145,6 @@ static int ov7xx0_configure(struct sd *sd)
 {
 	int rc, high, low;
 
-	/* Lawrence Glaister <lg@jfm.bc.ca> reports:
-	 *
-	 * Register 0x0f in the 7610 has the following effects:
-	 *
-	 * 0x85 (AEC method 1): Best overall, good contrast range
-	 * 0x45 (AEC method 2): Very overexposed
-	 * 0xa5 (spec sheet default): Ok, but the black level is
-	 *	shifted resulting in loss of contrast
-	 * 0x05 (old driver setting): very overexposed, too much
-	 *	contrast
-	 */
-	static const struct ov_i2c_regvals norm_7610[] = {
-		{ 0x10, 0xff },
-		{ 0x16, 0x06 },
-		{ 0x28, 0x24 },
-		{ 0x2b, 0xac },
-		{ 0x12, 0x00 },
-		{ 0x38, 0x81 },
-		{ 0x28, 0x24 },	/* 0c */
-		{ 0x0f, 0x85 },	/* lg's setting */
-		{ 0x15, 0x01 },
-		{ 0x20, 0x1c },
-		{ 0x23, 0x2a },
-		{ 0x24, 0x10 },
-		{ 0x25, 0x8a },
-		{ 0x26, 0xa2 },
-		{ 0x27, 0xc2 },
-		{ 0x2a, 0x04 },
-		{ 0x2c, 0xfe },
-		{ 0x2d, 0x93 },
-		{ 0x30, 0x71 },
-		{ 0x31, 0x60 },
-		{ 0x32, 0x26 },
-		{ 0x33, 0x20 },
-		{ 0x34, 0x48 },
-		{ 0x12, 0x24 },
-		{ 0x11, 0x01 },
-		{ 0x0c, 0x24 },
-		{ 0x0d, 0x24 },
-	};
-
-	static const struct ov_i2c_regvals norm_7620[] = {
-		{ 0x00, 0x00 },		/* gain */
-		{ 0x01, 0x80 },		/* blue gain */
-		{ 0x02, 0x80 },		/* red gain */
-		{ 0x03, 0xc0 },		/* OV7670_REG_VREF */
-		{ 0x06, 0x60 },
-		{ 0x07, 0x00 },
-		{ 0x0c, 0x24 },
-		{ 0x0c, 0x24 },
-		{ 0x0d, 0x24 },
-		{ 0x11, 0x01 },
-		{ 0x12, 0x24 },
-		{ 0x13, 0x01 },
-		{ 0x14, 0x84 },
-		{ 0x15, 0x01 },
-		{ 0x16, 0x03 },
-		{ 0x17, 0x2f },
-		{ 0x18, 0xcf },
-		{ 0x19, 0x06 },
-		{ 0x1a, 0xf5 },
-		{ 0x1b, 0x00 },
-		{ 0x20, 0x18 },
-		{ 0x21, 0x80 },
-		{ 0x22, 0x80 },
-		{ 0x23, 0x00 },
-		{ 0x26, 0xa2 },
-		{ 0x27, 0xea },
-		{ 0x28, 0x20 },
-		{ 0x29, 0x00 },
-		{ 0x2a, 0x10 },
-		{ 0x2b, 0x00 },
-		{ 0x2c, 0x88 },
-		{ 0x2d, 0x91 },
-		{ 0x2e, 0x80 },
-		{ 0x2f, 0x44 },
-		{ 0x60, 0x27 },
-		{ 0x61, 0x02 },
-		{ 0x62, 0x5f },
-		{ 0x63, 0xd5 },
-		{ 0x64, 0x57 },
-		{ 0x65, 0x83 },
-		{ 0x66, 0x55 },
-		{ 0x67, 0x92 },
-		{ 0x68, 0xcf },
-		{ 0x69, 0x76 },
-		{ 0x6a, 0x22 },
-		{ 0x6b, 0x00 },
-		{ 0x6c, 0x02 },
-		{ 0x6d, 0x44 },
-		{ 0x6e, 0x80 },
-		{ 0x6f, 0x1d },
-		{ 0x70, 0x8b },
-		{ 0x71, 0x00 },
-		{ 0x72, 0x14 },
-		{ 0x73, 0x54 },
-		{ 0x74, 0x00 },
-		{ 0x75, 0x8e },
-		{ 0x76, 0x00 },
-		{ 0x77, 0xff },
-		{ 0x78, 0x80 },
-		{ 0x79, 0x80 },
-		{ 0x7a, 0x80 },
-		{ 0x7b, 0xe2 },
-		{ 0x7c, 0x00 },
-	};
-
-	/* 7640 and 7648. The defaults should be OK for most registers. */
-	static const struct ov_i2c_regvals norm_7640[] = {
-		{ 0x12, 0x80 },
-		{ 0x12, 0x14 },
-	};
-
-	/* 7670. Defaults taken from OmniVision provided data,
-	*  as provided by Jonathan Corbet of OLPC		*/
-	static const struct ov_i2c_regvals norm_7670[] = {
-		{ OV7670_REG_COM7, OV7670_COM7_RESET },
-		{ OV7670_REG_TSLB, 0x04 },		/* OV */
-		{ OV7670_REG_COM7, OV7670_COM7_FMT_VGA }, /* VGA */
-		{ OV7670_REG_CLKRC, 0x01 },
-	/*
-	 * Set the hardware window.  These values from OV don't entirely
-	 * make sense - hstop is less than hstart.  But they work...
-	 */
-		{ OV7670_REG_HSTART, 0x13 },	{ OV7670_REG_HSTOP, 0x01 },
-		{ OV7670_REG_HREF, 0xb6 },	{ OV7670_REG_VSTART, 0x02 },
-		{ OV7670_REG_VSTOP, 0x7a },	{ OV7670_REG_VREF, 0x0a },
-
-		{ OV7670_REG_COM3, 0 },	{ OV7670_REG_COM14, 0 },
-	/* Mystery scaling numbers */
-		{ 0x70, 0x3a },		{ 0x71, 0x35 },
-		{ 0x72, 0x11 },		{ 0x73, 0xf0 },
-		{ 0xa2, 0x02 },
-/*		{ OV7670_REG_COM10, 0x0 }, */
-
-	/* Gamma curve values */
-		{ 0x7a, 0x20 },
-		{ 0x7b, 0x10 },
-		{ 0x7c, 0x1e },
-		{ 0x7d, 0x35 },
-		{ 0x7e, 0x5a },		{ 0x7f, 0x69 },
-		{ 0x80, 0x76 },		{ 0x81, 0x80 },
-		{ 0x82, 0x88 },		{ 0x83, 0x8f },
-		{ 0x84, 0x96 },		{ 0x85, 0xa3 },
-		{ 0x86, 0xaf },		{ 0x87, 0xc4 },
-		{ 0x88, 0xd7 },		{ 0x89, 0xe8 },
-
-	/* AGC and AEC parameters.  Note we start by disabling those features,
-	   then turn them only after tweaking the values. */
-		{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
-				 | OV7670_COM8_AECSTEP
-				 | OV7670_COM8_BFILT },
-		{ OV7670_REG_GAIN, 0 },	{ OV7670_REG_AECH, 0 },
-		{ OV7670_REG_COM4, 0x40 }, /* magic reserved bit */
-		{ OV7670_REG_COM9, 0x18 }, /* 4x gain + magic rsvd bit */
-		{ OV7670_REG_BD50MAX, 0x05 },	{ OV7670_REG_BD60MAX, 0x07 },
-		{ OV7670_REG_AEW, 0x95 },	{ OV7670_REG_AEB, 0x33 },
-		{ OV7670_REG_VPT, 0xe3 },	{ OV7670_REG_HAECC1, 0x78 },
-		{ OV7670_REG_HAECC2, 0x68 },
-		{ 0xa1, 0x03 }, /* magic */
-		{ OV7670_REG_HAECC3, 0xd8 },	{ OV7670_REG_HAECC4, 0xd8 },
-		{ OV7670_REG_HAECC5, 0xf0 },	{ OV7670_REG_HAECC6, 0x90 },
-		{ OV7670_REG_HAECC7, 0x94 },
-		{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
-				| OV7670_COM8_AECSTEP
-				| OV7670_COM8_BFILT
-				| OV7670_COM8_AGC
-				| OV7670_COM8_AEC },
-
-	/* Almost all of these are magic "reserved" values.  */
-		{ OV7670_REG_COM5, 0x61 },	{ OV7670_REG_COM6, 0x4b },
-		{ 0x16, 0x02 },
-		{ OV7670_REG_MVFP, 0x07 },
-		{ 0x21, 0x02 },		{ 0x22, 0x91 },
-		{ 0x29, 0x07 },		{ 0x33, 0x0b },
-		{ 0x35, 0x0b },		{ 0x37, 0x1d },
-		{ 0x38, 0x71 },		{ 0x39, 0x2a },
-		{ OV7670_REG_COM12, 0x78 },	{ 0x4d, 0x40 },
-		{ 0x4e, 0x20 },		{ OV7670_REG_GFIX, 0 },
-		{ 0x6b, 0x4a },		{ 0x74, 0x10 },
-		{ 0x8d, 0x4f },		{ 0x8e, 0 },
-		{ 0x8f, 0 },		{ 0x90, 0 },
-		{ 0x91, 0 },		{ 0x96, 0 },
-		{ 0x9a, 0 },		{ 0xb0, 0x84 },
-		{ 0xb1, 0x0c },		{ 0xb2, 0x0e },
-		{ 0xb3, 0x82 },		{ 0xb8, 0x0a },
-
-	/* More reserved magic, some of which tweaks white balance */
-		{ 0x43, 0x0a },		{ 0x44, 0xf0 },
-		{ 0x45, 0x34 },		{ 0x46, 0x58 },
-		{ 0x47, 0x28 },		{ 0x48, 0x3a },
-		{ 0x59, 0x88 },		{ 0x5a, 0x88 },
-		{ 0x5b, 0x44 },		{ 0x5c, 0x67 },
-		{ 0x5d, 0x49 },		{ 0x5e, 0x0e },
-		{ 0x6c, 0x0a },		{ 0x6d, 0x55 },
-		{ 0x6e, 0x11 },		{ 0x6f, 0x9f },
-						/* "9e for advance AWB" */
-		{ 0x6a, 0x40 },		{ OV7670_REG_BLUE, 0x40 },
-		{ OV7670_REG_RED, 0x60 },
-		{ OV7670_REG_COM8, OV7670_COM8_FASTAEC
-				| OV7670_COM8_AECSTEP
-				| OV7670_COM8_BFILT
-				| OV7670_COM8_AGC
-				| OV7670_COM8_AEC
-				| OV7670_COM8_AWB },
-
-	/* Matrix coefficients */
-		{ 0x4f, 0x80 },		{ 0x50, 0x80 },
-		{ 0x51, 0 },		{ 0x52, 0x22 },
-		{ 0x53, 0x5e },		{ 0x54, 0x80 },
-		{ 0x58, 0x9e },
-
-		{ OV7670_REG_COM16, OV7670_COM16_AWBGAIN },
-		{ OV7670_REG_EDGE, 0 },
-		{ 0x75, 0x05 },		{ 0x76, 0xe1 },
-		{ 0x4c, 0 },		{ 0x77, 0x01 },
-		{ OV7670_REG_COM13, OV7670_COM13_GAMMA
-				  | OV7670_COM13_UVSAT
-				  | 2},		/* was 3 */
-		{ 0x4b, 0x09 },
-		{ 0xc9, 0x60 },		{ OV7670_REG_COM16, 0x38 },
-		{ 0x56, 0x40 },
-
-		{ 0x34, 0x11 },
-		{ OV7670_REG_COM11, OV7670_COM11_EXP|OV7670_COM11_HZAUTO },
-		{ 0xa4, 0x88 },		{ 0x96, 0 },
-		{ 0x97, 0x30 },		{ 0x98, 0x20 },
-		{ 0x99, 0x30 },		{ 0x9a, 0x84 },
-		{ 0x9b, 0x29 },		{ 0x9c, 0x03 },
-		{ 0x9d, 0x4c },		{ 0x9e, 0x3f },
-		{ 0x78, 0x04 },
-
-	/* Extra-weird stuff.  Some sort of multiplexor register */
-		{ 0x79, 0x01 },		{ 0xc8, 0xf0 },
-		{ 0x79, 0x0f },		{ 0xc8, 0x00 },
-		{ 0x79, 0x10 },		{ 0xc8, 0x7e },
-		{ 0x79, 0x0a },		{ 0xc8, 0x80 },
-		{ 0x79, 0x0b },		{ 0xc8, 0x01 },
-		{ 0x79, 0x0c },		{ 0xc8, 0x0f },
-		{ 0x79, 0x0d },		{ 0xc8, 0x20 },
-		{ 0x79, 0x09 },		{ 0xc8, 0x80 },
-		{ 0x79, 0x02 },		{ 0xc8, 0xc0 },
-		{ 0x79, 0x03 },		{ 0xc8, 0x40 },
-		{ 0x79, 0x05 },		{ 0xc8, 0x30 },
-		{ 0x79, 0x26 },
-	};
 
 	PDEBUG(D_PROBE, "starting OV7xx0 configuration");
 
@@ -1011,8 +1196,9 @@ static int ov7xx0_configure(struct sd *sd)
 			switch (low) {
 			case 0x30:
 				PDEBUG(D_PROBE, "Sensor is an OV7630/OV7635");
-				sd->sensor = SEN_OV7630;
-				break;
+				PDEBUG(D_ERR,
+				      "7630 is not supported by this driver");
+				return -1;
 			case 0x40:
 				PDEBUG(D_PROBE, "Sensor is an OV7645");
 				sd->sensor = SEN_OV7640; /* FIXME */
@@ -1038,32 +1224,6 @@ static int ov7xx0_configure(struct sd *sd)
 		return -1;
 	}
 
-	switch (sd->sensor) {
-	case SEN_OV7620:
-		PDEBUG(D_PROBE, "Writing 7620 registers");
-		if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
-			return -1;
-		break;
-	case SEN_OV7630:
-		PDEBUG(D_ERR, "7630 is not supported by this driver version");
-		return -1;
-	case SEN_OV7640:
-		PDEBUG(D_PROBE, "Writing 7640 registers");
-		if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
-			return -1;
-		break;
-	case SEN_OV7670:
-		PDEBUG(D_PROBE, "Writing 7670 registers");
-		if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
-			return -1;
-		break;
-	default:
-		PDEBUG(D_PROBE, "Writing 7610 registers");
-		if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
-			return -1;
-		break;
-	}
-
 	/* Set sensor-specific vars */
 /*	sd->sif = 0;		already done */
 	return 0;
@@ -1073,141 +1233,7 @@ static int ov7xx0_configure(struct sd *sd)
 static int ov6xx0_configure(struct sd *sd)
 {
 	int rc;
-	static const struct ov_i2c_regvals norm_6x20[] = {
-		{ 0x12, 0x80 }, /* reset */
-		{ 0x11, 0x01 },
-		{ 0x03, 0x60 },
-		{ 0x05, 0x7f }, /* For when autoadjust is off */
-		{ 0x07, 0xa8 },
-		/* The ratio of 0x0c and 0x0d  controls the white point */
-		{ 0x0c, 0x24 },
-		{ 0x0d, 0x24 },
-		{ 0x0f, 0x15 }, /* COMS */
-		{ 0x10, 0x75 }, /* AEC Exposure time */
-		{ 0x12, 0x24 }, /* Enable AGC */
-		{ 0x14, 0x04 },
-		/* 0x16: 0x06 helps frame stability with moving objects */
-		{ 0x16, 0x06 },
-/*		{ 0x20, 0x30 },  * Aperture correction enable */
-		{ 0x26, 0xb2 }, /* BLC enable */
-		/* 0x28: 0x05 Selects RGB format if RGB on */
-		{ 0x28, 0x05 },
-		{ 0x2a, 0x04 }, /* Disable framerate adjust */
-/*		{ 0x2b, 0xac },  * Framerate; Set 2a[7] first */
-		{ 0x2d, 0x99 },
-		{ 0x33, 0xa0 }, /* Color Processing Parameter */
-		{ 0x34, 0xd2 }, /* Max A/D range */
-		{ 0x38, 0x8b },
-		{ 0x39, 0x40 },
-
-		{ 0x3c, 0x39 }, /* Enable AEC mode changing */
-		{ 0x3c, 0x3c }, /* Change AEC mode */
-		{ 0x3c, 0x24 }, /* Disable AEC mode changing */
-
-		{ 0x3d, 0x80 },
-		/* These next two registers (0x4a, 0x4b) are undocumented.
-		 * They control the color balance */
-		{ 0x4a, 0x80 },
-		{ 0x4b, 0x80 },
-		{ 0x4d, 0xd2 }, /* This reduces noise a bit */
-		{ 0x4e, 0xc1 },
-		{ 0x4f, 0x04 },
-/* Do 50-53 have any effect? */
-/* Toggle 0x12[2] off and on here? */
-	};
-
-	static const struct ov_i2c_regvals norm_6x30[] = {
-		{ 0x12, 0x80 }, /* Reset */
-		{ 0x00, 0x1f }, /* Gain */
-		{ 0x01, 0x99 }, /* Blue gain */
-		{ 0x02, 0x7c }, /* Red gain */
-		{ 0x03, 0xc0 }, /* Saturation */
-		{ 0x05, 0x0a }, /* Contrast */
-		{ 0x06, 0x95 }, /* Brightness */
-		{ 0x07, 0x2d }, /* Sharpness */
-		{ 0x0c, 0x20 },
-		{ 0x0d, 0x20 },
-		{ 0x0e, 0x20 },
-		{ 0x0f, 0x05 },
-		{ 0x10, 0x9a },
-		{ 0x11, 0x00 }, /* Pixel clock = fastest */
-		{ 0x12, 0x24 }, /* Enable AGC and AWB */
-		{ 0x13, 0x21 },
-		{ 0x14, 0x80 },
-		{ 0x15, 0x01 },
-		{ 0x16, 0x03 },
-		{ 0x17, 0x38 },
-		{ 0x18, 0xea },
-		{ 0x19, 0x04 },
-		{ 0x1a, 0x93 },
-		{ 0x1b, 0x00 },
-		{ 0x1e, 0xc4 },
-		{ 0x1f, 0x04 },
-		{ 0x20, 0x20 },
-		{ 0x21, 0x10 },
-		{ 0x22, 0x88 },
-		{ 0x23, 0xc0 }, /* Crystal circuit power level */
-		{ 0x25, 0x9a }, /* Increase AEC black ratio */
-		{ 0x26, 0xb2 }, /* BLC enable */
-		{ 0x27, 0xa2 },
-		{ 0x28, 0x00 },
-		{ 0x29, 0x00 },
-		{ 0x2a, 0x84 }, /* 60 Hz power */
-		{ 0x2b, 0xa8 }, /* 60 Hz power */
-		{ 0x2c, 0xa0 },
-		{ 0x2d, 0x95 }, /* Enable auto-brightness */
-		{ 0x2e, 0x88 },
-		{ 0x33, 0x26 },
-		{ 0x34, 0x03 },
-		{ 0x36, 0x8f },
-		{ 0x37, 0x80 },
-		{ 0x38, 0x83 },
-		{ 0x39, 0x80 },
-		{ 0x3a, 0x0f },
-		{ 0x3b, 0x3c },
-		{ 0x3c, 0x1a },
-		{ 0x3d, 0x80 },
-		{ 0x3e, 0x80 },
-		{ 0x3f, 0x0e },
-		{ 0x40, 0x00 }, /* White bal */
-		{ 0x41, 0x00 }, /* White bal */
-		{ 0x42, 0x80 },
-		{ 0x43, 0x3f }, /* White bal */
-		{ 0x44, 0x80 },
-		{ 0x45, 0x20 },
-		{ 0x46, 0x20 },
-		{ 0x47, 0x80 },
-		{ 0x48, 0x7f },
-		{ 0x49, 0x00 },
-		{ 0x4a, 0x00 },
-		{ 0x4b, 0x80 },
-		{ 0x4c, 0xd0 },
-		{ 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
-		{ 0x4e, 0x40 },
-		{ 0x4f, 0x07 }, /* UV avg., col. killer: max */
-		{ 0x50, 0xff },
-		{ 0x54, 0x23 }, /* Max AGC gain: 18dB */
-		{ 0x55, 0xff },
-		{ 0x56, 0x12 },
-		{ 0x57, 0x81 },
-		{ 0x58, 0x75 },
-		{ 0x59, 0x01 }, /* AGC dark current comp.: +1 */
-		{ 0x5a, 0x2c },
-		{ 0x5b, 0x0f }, /* AWB chrominance levels */
-		{ 0x5c, 0x10 },
-		{ 0x3d, 0x80 },
-		{ 0x27, 0xa6 },
-		{ 0x12, 0x20 }, /* Toggle AWB */
-		{ 0x12, 0x24 },
-	};
-
-	PDEBUG(D_PROBE, "starting sensor configuration");
-
-	if (init_ov_sensor(sd) < 0) {
-		PDEBUG(D_ERR, "Failed to read sensor ID.");
-		return -1;
-	}
-	PDEBUG(D_PROBE, "OV6xx0 sensor detected");
+	PDEBUG(D_PROBE, "starting OV6xx0 configuration");
 
 	/* Detect sensor (sub)type */
 	rc = i2c_r(sd, OV7610_REG_COM_I);
@@ -1251,15 +1277,6 @@ static int ov6xx0_configure(struct sd *sd)
 	/* Set sensor-specific vars */
 	sd->sif = 1;
 
-	if (sd->sensor == SEN_OV6620) {
-		PDEBUG(D_PROBE, "Writing 6x20 registers");
-		if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
-			return -1;
-	} else {
-		PDEBUG(D_PROBE, "Writing 6x30 registers");
-		if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
-			return -1;
-	}
 	return 0;
 }
 
@@ -1298,22 +1315,31 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	ov51x_led_control(sd, 0);	/* turn LED off */
 
 	/* Test for 76xx */
-	sd->primary_i2c_slave = OV7xx0_SID;
 	if (ov51x_set_slave_ids(sd, OV7xx0_SID) < 0)
 		goto error;
 
 	/* The OV519 must be more aggressive about sensor detection since
 	 * I2C write will never fail if the sensor is not present. We have
 	 * to try to initialize the sensor to detect its presence */
-	if (init_ov_sensor(sd) < 0) {
+	if (init_ov_sensor(sd) >= 0) {
+		if (ov7xx0_configure(sd) < 0) {
+			PDEBUG(D_ERR, "Failed to configure OV7xx0");
+			goto error;
+		}
+	} else {
+
 		/* Test for 6xx0 */
-		sd->primary_i2c_slave = OV6xx0_SID;
 		if (ov51x_set_slave_ids(sd, OV6xx0_SID) < 0)
 			goto error;
 
-		if (init_ov_sensor(sd) < 0) {
+		if (init_ov_sensor(sd) >= 0) {
+			if (ov6xx0_configure(sd) < 0) {
+				PDEBUG(D_ERR, "Failed to configure OV6xx0");
+				goto error;
+			}
+		} else {
+
 			/* Test for 8xx0 */
-			sd->primary_i2c_slave = OV8xx0_SID;
 			if (ov51x_set_slave_ids(sd, OV8xx0_SID) < 0)
 				goto error;
 
@@ -1321,24 +1347,13 @@ static int sd_config(struct gspca_dev *gspca_dev,
 				PDEBUG(D_ERR,
 					"Can't determine sensor slave IDs");
 				goto error;
-			} else {
-				if (ov8xx0_configure(sd) < 0) {
-					PDEBUG(D_ERR,
-					   "Failed to configure OV8xx0 sensor");
-					goto error;
-				}
 			}
-		} else {
-			if (ov6xx0_configure(sd) < 0) {
-				PDEBUG(D_ERR, "Failed to configure OV6xx0");
+			if (ov8xx0_configure(sd) < 0) {
+				PDEBUG(D_ERR,
+				   "Failed to configure OV8xx0 sensor");
 				goto error;
 			}
 		}
-	} else {
-		if (ov7xx0_configure(sd) < 0) {
-			PDEBUG(D_ERR, "Failed to configure OV7xx0");
-			goto error;
-		}
 	}
 
 	cam = &gspca_dev->cam;
@@ -1364,6 +1379,41 @@ error:
 /* this function is called at open time */
 static int sd_open(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	/* initialize the sensor */
+	switch (sd->sensor) {
+	case SEN_OV6620:
+		if (write_i2c_regvals(sd, norm_6x20, ARRAY_SIZE(norm_6x20)))
+			return -EIO;
+		break;
+	case SEN_OV6630:
+		if (write_i2c_regvals(sd, norm_6x30, ARRAY_SIZE(norm_6x30)))
+			return -EIO;
+		break;
+	default:
+/*	case SEN_OV7610: */
+/*	case SEN_OV76BE: */
+		if (write_i2c_regvals(sd, norm_7610, ARRAY_SIZE(norm_7610)))
+			return -EIO;
+		break;
+	case SEN_OV7620:
+		if (write_i2c_regvals(sd, norm_7620, ARRAY_SIZE(norm_7620)))
+			return -EIO;
+		break;
+	case SEN_OV7640:
+		if (write_i2c_regvals(sd, norm_7640, ARRAY_SIZE(norm_7640)))
+			return -EIO;
+		break;
+	case SEN_OV7670:
+		if (write_i2c_regvals(sd, norm_7670, ARRAY_SIZE(norm_7670)))
+			return -EIO;
+		break;
+	case SEN_OV8610:
+		if (write_i2c_regvals(sd, norm_8610, ARRAY_SIZE(norm_8610)))
+			return -EIO;
+		break;
+	}
 	return 0;
 }
 
-- 
GitLab


From 66e4124f41808b50f6e1b6771621d6c7bf1c34a6 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:16 -0300
Subject: [PATCH 743/869] V4L/DVB (8820): gspca: Change initialization and
 gamma of zc3xx - pas106.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/pac207.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index 620c9631629..e6b5c8a5b5d 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -131,7 +131,8 @@ static struct ctrl sd_ctrls[] = {
 		.minimum = 0,
 		.maximum = 1,
 		.step	= 1,
-		.default_value = 1,
+#define AUTOGAIN_DEF 1
+		.default_value = AUTOGAIN_DEF,
 		.flags = 0,
 	    },
 	    .set = sd_setautogain,
@@ -256,13 +257,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		return -ENODEV;
 	}
 
-	pac207_write_reg(gspca_dev, 0x41, 0x00);
-				/* Bit_0=Image Format,
-				 * Bit_1=LED,
-				 * Bit_2=Compression test mode enable */
-	pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
-	pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */
-
 	PDEBUG(D_PROBE,
 		"Pixart PAC207BCA Image Processor and Control Chip detected"
 		" (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
@@ -274,6 +268,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->brightness = PAC207_BRIGHTNESS_DEFAULT;
 	sd->exposure = PAC207_EXPOSURE_DEFAULT;
 	sd->gain = PAC207_GAIN_DEFAULT;
+	sd->autogain = AUTOGAIN_DEF;
 
 	return 0;
 }
@@ -281,9 +276,13 @@ static int sd_config(struct gspca_dev *gspca_dev,
 /* this function is called at open time */
 static int sd_open(struct gspca_dev *gspca_dev)
 {
-	struct sd *sd = (struct sd *) gspca_dev;
+	pac207_write_reg(gspca_dev, 0x41, 0x00);
+				/* Bit_0=Image Format,
+				 * Bit_1=LED,
+				 * Bit_2=Compression test mode enable */
+	pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
+	pac207_write_reg(gspca_dev, 0x11, 0x30); /* Analog Bias */
 
-	sd->autogain = 1;
 	return 0;
 }
 
-- 
GitLab


From 012d6b029ec17f45374303bbdccd0bc206725751 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:16 -0300
Subject: [PATCH 744/869] V4L/DVB (8822): gspca: Change some subdriver
 functions for suspend/resume.

- new function 'init' called on probe and resume
- remove the functions 'open' and 'closed'
- 'stopN' and 'stop0' are optional

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/conex.c   | 16 ++--------
 drivers/media/video/gspca/etoms.c   | 16 ++--------
 drivers/media/video/gspca/gspca.c   | 45 +++++++++++------------------
 drivers/media/video/gspca/gspca.h   |  9 +++---
 drivers/media/video/gspca/mars.c    | 16 ++--------
 drivers/media/video/gspca/ov519.c   | 16 ++--------
 drivers/media/video/gspca/pac207.c  | 17 ++---------
 drivers/media/video/gspca/pac7311.c | 12 ++------
 drivers/media/video/gspca/sonixb.c  | 16 ++--------
 drivers/media/video/gspca/sonixj.c  | 16 ++--------
 drivers/media/video/gspca/spca500.c | 16 ++--------
 drivers/media/video/gspca/spca501.c | 12 ++------
 drivers/media/video/gspca/spca505.c | 12 ++------
 drivers/media/video/gspca/spca506.c | 16 ++--------
 drivers/media/video/gspca/spca508.c | 17 ++---------
 drivers/media/video/gspca/spca561.c | 19 ++++--------
 drivers/media/video/gspca/stk014.c  | 16 ++--------
 drivers/media/video/gspca/sunplus.c | 16 ++--------
 drivers/media/video/gspca/t613.c    | 31 +++++---------------
 drivers/media/video/gspca/tv8532.c  | 16 ++--------
 drivers/media/video/gspca/vc032x.c  | 20 ++-----------
 drivers/media/video/gspca/zc3xx.c   | 17 ++---------
 22 files changed, 89 insertions(+), 298 deletions(-)

diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 739ef557c43..3db5c1e3283 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -826,8 +826,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	cx11646_init1(gspca_dev);
 	cx11646_initsize(gspca_dev);
@@ -845,10 +845,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	cx11646_jpeg(gspca_dev);
 }
 
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	int retry = 50;
@@ -871,10 +867,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	reg_w_val(gspca_dev, 0x00fc, 0xe0);
 }
 
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -998,11 +990,9 @@ static struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
-	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index e5a9eee673a..c03b1f45de1 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -676,8 +676,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
@@ -711,14 +711,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	et_video(gspca_dev, 0);		/* video off */
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static __u8 Et_getgainG(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -895,11 +887,9 @@ static struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.dq_callback = do_autogain,
 };
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 1767991c1f4..fe096e76e5c 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -558,10 +558,12 @@ static void gspca_stream_off(struct gspca_dev *gspca_dev)
 	gspca_dev->streaming = 0;
 	atomic_set(&gspca_dev->nevent, 0);
 	if (gspca_dev->present) {
-		gspca_dev->sd_desc->stopN(gspca_dev);
+		if (gspca_dev->sd_desc->stopN)
+			gspca_dev->sd_desc->stopN(gspca_dev);
 		destroy_urbs(gspca_dev);
 		gspca_set_alt0(gspca_dev);
-		gspca_dev->sd_desc->stop0(gspca_dev);
+		if (gspca_dev->sd_desc->stop0)
+			gspca_dev->sd_desc->stop0(gspca_dev);
 		PDEBUG(D_STREAM, "stream off OK");
 	}
 }
@@ -770,19 +772,7 @@ static int dev_open(struct inode *inode, struct file *file)
 		goto out;
 	}
 
-	/* if not done yet, initialize the sensor */
-	if (gspca_dev->users == 0) {
-		if (mutex_lock_interruptible(&gspca_dev->usb_lock)) {
-			ret = -ERESTARTSYS;
-			goto out;
-		}
-		ret = gspca_dev->sd_desc->open(gspca_dev);
-		mutex_unlock(&gspca_dev->usb_lock);
-		if (ret != 0) {
-			PDEBUG(D_ERR|D_CONF, "init device failed %d", ret);
-			goto out;
-		}
-	} else if (gspca_dev->users > 4) {	/* (arbitrary value) */
+	if (gspca_dev->users > 4) {	/* (arbitrary value) */
 		ret = -EBUSY;
 		goto out;
 	}
@@ -795,6 +785,7 @@ static int dev_open(struct inode *inode, struct file *file)
 	else
 		gspca_dev->vdev.debug &= ~3;
 #endif
+	ret = 0;
 out:
 	mutex_unlock(&gspca_dev->queue_lock);
 	if (ret != 0)
@@ -815,11 +806,6 @@ static int dev_close(struct inode *inode, struct file *file)
 
 	/* if the file did the capture, free the streaming resources */
 	if (gspca_dev->capt_file == file) {
-		mutex_lock(&gspca_dev->usb_lock);
-		if (gspca_dev->streaming)
-			gspca_stream_off(gspca_dev);
-		gspca_dev->sd_desc->close(gspca_dev);
-		mutex_unlock(&gspca_dev->usb_lock);
 		frame_free(gspca_dev);
 		gspca_dev->capt_file = NULL;
 		gspca_dev->memory = GSPCA_MEMORY_NO;
@@ -1747,8 +1733,11 @@ int gspca_dev_probe(struct usb_interface *intf,
 /*	gspca_dev->users = 0;			(done by kzalloc) */
 	gspca_dev->nbufread = 2;
 
-	/* configure the subdriver */
+	/* configure the subdriver and initialize the USB device */
 	ret = gspca_dev->sd_desc->config(gspca_dev, id);
+	if (ret < 0)
+		goto out;
+	ret = gspca_dev->sd_desc->init(gspca_dev);
 	if (ret < 0)
 		goto out;
 	ret = gspca_set_alt0(gspca_dev);
@@ -1825,10 +1814,12 @@ int gspca_suspend(struct usb_interface *intf, pm_message_t message)
 	if (!gspca_dev->streaming)
 		return 0;
 	gspca_dev->frozen = 1;		/* avoid urb error messages */
-	gspca_dev->sd_desc->stopN(gspca_dev);
+	if (gspca_dev->sd_desc->stopN)
+		gspca_dev->sd_desc->stopN(gspca_dev);
 	destroy_urbs(gspca_dev);
 	gspca_set_alt0(gspca_dev);
-	gspca_dev->sd_desc->stop0(gspca_dev);
+	if (gspca_dev->sd_desc->stop0)
+		gspca_dev->sd_desc->stop0(gspca_dev);
 	return 0;
 }
 EXPORT_SYMBOL(gspca_suspend);
@@ -1838,11 +1829,9 @@ int gspca_resume(struct usb_interface *intf)
 	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
 
 	gspca_dev->frozen = 0;
-	if (gspca_dev->users != 0) {
-		gspca_dev->sd_desc->open(gspca_dev);
-		if (gspca_dev->streaming)
-			return gspca_init_transfer(gspca_dev);
-	}
+	gspca_dev->sd_desc->init(gspca_dev);
+	if (gspca_dev->streaming)
+		return gspca_init_transfer(gspca_dev);
 	return 0;
 }
 EXPORT_SYMBOL(gspca_resume);
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index a804ef18b8d..7c2f44b2397 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -90,15 +90,14 @@ struct sd_desc {
 /* controls */
 	const struct ctrl *ctrls;
 	int nctrls;
-/* operations */
+/* mandatory operations */
 	cam_cf_op config;	/* called on probe */
-	cam_op open;		/* called on open */
+	cam_op init;		/* called on probe and resume */
 	cam_v_op start;		/* called on stream on */
-	cam_v_op stopN;		/* called on stream off - main alt */
-	cam_v_op stop0;		/* called on stream off - alt 0 */
-	cam_v_op close;		/* called on close */
 	cam_pkt_op pkt_scan;
 /* optional operations */
+	cam_v_op stopN;		/* called on stream off - main alt */
+	cam_v_op stop0;		/* called on stream off - alt 0 */
 	cam_v_op dq_callback;	/* called when a frame has been dequeued */
 	cam_jpg_op get_jcomp;
 	cam_jpg_op set_jcomp;
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index d7e20957818..281475913a6 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -144,8 +144,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	return 0;
 }
@@ -358,14 +358,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		PDEBUG(D_ERR, "Camera Stop failed");
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -411,11 +403,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 4062aed2413..19378dde27c 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -1376,8 +1376,8 @@ error:
 	return -EBUSY;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
@@ -1877,14 +1877,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	ov51x_led_control((struct sd *) gspca_dev, 0);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -2141,11 +2133,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index e6b5c8a5b5d..a15bccad947 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -273,8 +273,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	pac207_write_reg(gspca_dev, 0x41, 0x00);
 				/* Bit_0=Image Format,
@@ -338,15 +338,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void pac207_do_auto_gain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -532,11 +523,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.dq_callback = pac207_do_auto_gain,
 	.pkt_scan = sd_pkt_scan,
 };
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 69d610062d0..e22ca610334 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -590,8 +590,8 @@ static void sethvflip(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x11, 0x01);
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	return 0;
 }
@@ -691,11 +691,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	}
 }
 
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void do_autogain(struct gspca_dev *gspca_dev)
 {
 }
@@ -902,11 +897,10 @@ static struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.dq_callback = do_autogain,
 };
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 64aae060a93..044a9ec58db 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -799,8 +799,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	return 0;
 }
@@ -963,14 +963,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x01, &ByteSend, 1);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			unsigned char *data,		/* isoc packet */
@@ -1162,11 +1154,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
 	.dq_callback = do_autogain,
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index e657b8ba6db..5380b4323a7 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -948,8 +948,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 /*	const __u8 *sn9c1xx; */
@@ -1353,14 +1353,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, 0xf1, 0x00);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void do_autogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -1548,11 +1540,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.dq_callback = do_autogain,
 };
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 5a20385fb17..6e733901fcc 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -645,8 +645,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
@@ -880,14 +880,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 		gspca_dev->usb_buf[0]);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1051,11 +1043,9 @@ static struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
diff --git a/drivers/media/video/gspca/spca501.c b/drivers/media/video/gspca/spca501.c
index 525f1b3400e..e9eb59bae4f 100644
--- a/drivers/media/video/gspca/spca501.c
+++ b/drivers/media/video/gspca/spca501.c
@@ -1953,8 +1953,8 @@ error:
 	return -EINVAL;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
@@ -2022,11 +2022,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
 {
 	reg_write(gspca_dev->dev, SPCA501_REG_CTLRL, 0x05, 0x00);
 }
@@ -2120,11 +2115,10 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
diff --git a/drivers/media/video/gspca/spca505.c b/drivers/media/video/gspca/spca505.c
index 8f00558c2f5..f601daf19eb 100644
--- a/drivers/media/video/gspca/spca505.c
+++ b/drivers/media/video/gspca/spca505.c
@@ -655,8 +655,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int ret;
@@ -742,11 +742,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 }
 
 static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
 {
 	/* This maybe reset or power control */
 	reg_write(gspca_dev->dev, 0x03, 0x03, 0x20);
@@ -825,11 +820,10 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
diff --git a/drivers/media/video/gspca/spca506.c b/drivers/media/video/gspca/spca506.c
index ae772488cf7..195dce96ef0 100644
--- a/drivers/media/video/gspca/spca506.c
+++ b/drivers/media/video/gspca/spca506.c
@@ -313,8 +313,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct usb_device *dev = gspca_dev->dev;
 
@@ -560,14 +560,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w(dev, 0x03, 0x00, 0x0003);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -740,11 +732,9 @@ static struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index 7b38c4e70fd..281ce02103a 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -1521,8 +1521,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;			/* success */
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 /*	write_vector(gspca_dev, spca508_open_data); */
 	return 0;
@@ -1554,15 +1554,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_write(gspca_dev->dev, 0x8112, 0x20);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1633,11 +1624,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index b6a013f1dec..2ca509daf0b 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -560,14 +560,14 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open_12a(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init_12a(struct gspca_dev *gspca_dev)
 {
 	PDEBUG(D_STREAM, "Chip revision: 012a");
 	init_161rev12A(gspca_dev);
 	return 0;
 }
-static int sd_open_72a(struct gspca_dev *gspca_dev)
+static int sd_init_72a(struct gspca_dev *gspca_dev)
 {
 	PDEBUG(D_STREAM, "Chip revision: 072a");
 	write_vector(gspca_dev, spca561_init_data);
@@ -733,12 +733,7 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 		reg_w_val(gspca_dev->dev, 0x8118, 0x29);
 		reg_w_val(gspca_dev->dev, 0x8114, 0x08);
 	}
-}
-
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-	reg_w_val(gspca_dev->dev, 0x8114, 0);
+/*	reg_w_val(gspca_dev->dev, 0x8114, 0); */
 }
 
 static void do_autogain(struct gspca_dev *gspca_dev)
@@ -1121,11 +1116,10 @@ static const struct sd_desc sd_desc_12a = {
 	.ctrls = sd_ctrls_12a,
 	.nctrls = ARRAY_SIZE(sd_ctrls_12a),
 	.config = sd_config,
-	.open = sd_open_12a,
+	.init = sd_init_12a,
 	.start = sd_start_12a,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 /*	.dq_callback = do_autogain,	 * fixme */
 };
@@ -1134,11 +1128,10 @@ static const struct sd_desc sd_desc_72a = {
 	.ctrls = sd_ctrls_72a,
 	.nctrls = ARRAY_SIZE(sd_ctrls_72a),
 	.config = sd_config,
-	.open = sd_open_72a,
+	.init = sd_init_72a,
 	.start = sd_start_72a,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.dq_callback = do_autogain,
 };
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index 387a8cf2b3b..2f2de429e27 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -306,8 +306,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	int ret;
 
@@ -398,14 +398,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	PDEBUG(D_STREAM, "camera stopped");
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -535,11 +527,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
 };
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index c935384fc23..bddf73360c2 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -848,8 +848,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct usb_device *dev = gspca_dev->dev;
@@ -1069,14 +1069,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	}
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1369,11 +1361,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 962c1df5829..81b175e15ca 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -552,6 +552,13 @@ static int init_default_parameters(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	init_default_parameters(gspca_dev);
+	return 0;
+}
+
 static void setbrightness(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -893,18 +900,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	setcolors(gspca_dev);
 }
 
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -972,24 +967,14 @@ static int sd_querymenu(struct gspca_dev *gspca_dev,
 	return -EINVAL;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
-{
-	init_default_parameters(gspca_dev);
-	return 0;
-}
-
 /* sub-driver description */
 static const struct sd_desc sd_desc = {
 	.name = MODULE_NAME,
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
-	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
 };
diff --git a/drivers/media/video/gspca/tv8532.c b/drivers/media/video/gspca/tv8532.c
index d2273624a91..084af05302a 100644
--- a/drivers/media/video/gspca/tv8532.c
+++ b/drivers/media/video/gspca/tv8532.c
@@ -331,8 +331,8 @@ static void tv_8532_PollReg(struct gspca_dev *gspca_dev)
 	}
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	reg_w_1(gspca_dev, TV8532_AD_SLOPE, 0x32);
 	reg_w_1(gspca_dev, TV8532_AD_BITCTRL, 0x00);
@@ -450,14 +450,6 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	reg_w_1(gspca_dev, TV8532_GPIO_OE, 0x0b);
 }
 
-static void sd_stop0(struct gspca_dev *gspca_dev)
-{
-}
-
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void tv8532_preprocess(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -611,11 +603,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
-	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 };
 
diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index 5454f0eb007..f8c3ff30e46 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -1477,8 +1477,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	return 0;
 }
@@ -1640,19 +1640,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	reg_w(dev, 0x89, 0xffff, 0xffff);
 }
 
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-/*	struct usb_device *dev = gspca_dev->dev;
-	__u8 buffread;
-
-	reg_w(dev, 0x89, 0xffff, 0xffff);
-	reg_w(dev, 0xa0, 0x01, 0xb301);
-	reg_w(dev, 0xa0, 0x09, 0xb303);
-	reg_w(dev, 0x89, 0xffff, 0xffff);
-*/
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
 			__u8 *data,			/* isoc packet */
@@ -1741,11 +1728,10 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = ARRAY_SIZE(sd_ctrls),
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
 	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
 };
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index e78b9b7591d..f4239b442c1 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7171,8 +7171,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	return 0;
 }
 
-/* this function is called at open time */
-static int sd_open(struct gspca_dev *gspca_dev)
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
 {
 	reg_w(gspca_dev->dev, 0x01, 0x0000);
 	return 0;
@@ -7333,10 +7333,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	}
 }
 
-static void sd_stopN(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_stop0(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -7344,11 +7340,6 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	send_unknown(gspca_dev->dev, sd->sensor);
 }
 
-/* this function is called at close time */
-static void sd_close(struct gspca_dev *gspca_dev)
-{
-}
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,
 			__u8 *data,
@@ -7508,11 +7499,9 @@ static const struct sd_desc sd_desc = {
 	.ctrls = sd_ctrls,
 	.nctrls = sizeof sd_ctrls / sizeof sd_ctrls[0],
 	.config = sd_config,
-	.open = sd_open,
+	.init = sd_init,
 	.start = sd_start,
-	.stopN = sd_stopN,
 	.stop0 = sd_stop0,
-	.close = sd_close,
 	.pkt_scan = sd_pkt_scan,
 	.querymenu = sd_querymenu,
 };
-- 
GitLab


From de00448f708a2fd705f9c5ccdfa383dbf3dcef92 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:16 -0300
Subject: [PATCH 745/869] V4L/DVB (8823): gspca: H and V flips work for ov7670
 only in ov519.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/ov519.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index 19378dde27c..4df4eec9f7e 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -126,6 +126,7 @@ static struct ctrl sd_ctrls[] = {
 	    .get = sd_getcolors,
 	},
 /* next controls work with ov7670 only */
+#define HFLIP_IDX 3
 	{
 	    {
 		.id      = V4L2_CID_HFLIP,
@@ -140,6 +141,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_sethflip,
 	    .get = sd_gethflip,
 	},
+#define VFLIP_IDX 4
 	{
 	    {
 		.id      = V4L2_CID_VFLIP,
@@ -1370,6 +1372,9 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->colors = COLOR_DEF;
 	sd->hflip = HFLIP_DEF;
 	sd->vflip = VFLIP_DEF;
+	if (sd->sensor != SEN_OV7670)
+		gspca_dev->ctrl_dis = (1 << HFLIP_IDX)
+					| (1 << VFLIP_IDX);
 	return 0;
 error:
 	PDEBUG(D_ERR, "OV519 Config failed");
-- 
GitLab


From a1e8288b1d80130119692818b46694660f28e03a Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:17 -0300
Subject: [PATCH 746/869] V4L/DVB (8824): gspca: Too much code removed in the
 suspend/resume changeset.

- the stream must stop when the main application closes the device.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/gspca.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index fe096e76e5c..42b0b83d095 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -806,6 +806,11 @@ static int dev_close(struct inode *inode, struct file *file)
 
 	/* if the file did the capture, free the streaming resources */
 	if (gspca_dev->capt_file == file) {
+		if (gspca_dev->streaming) {
+			mutex_lock(&gspca_dev->usb_lock);
+			gspca_stream_off(gspca_dev);
+			mutex_unlock(&gspca_dev->usb_lock);
+		}
 		frame_free(gspca_dev);
 		gspca_dev->capt_file = NULL;
 		gspca_dev->memory = GSPCA_MEMORY_NO;
-- 
GitLab


From 8a5b2e909d56a1d5edec5e8f8848e03aafbc588e Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:17 -0300
Subject: [PATCH 747/869] V4L/DVB (8825): gspca: More controls for pac73xx and
 new webcam 093a:2624.

-Add usb id for 093a:2624 (pac7302)
-Report some controls to userspace with 7302 only, as they are 7302 only
-Add gain and exposure controls
-Add autogain
-Fix 7302 imaged being mirrored by default

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 Documentation/video4linux/gspca.txt    |   1 +
 drivers/media/video/gspca/pac207.c     |  16 +-
 drivers/media/video/gspca/pac7311.c    | 301 ++++++++++++++++++-------
 drivers/media/video/gspca/pac_common.h |   9 +-
 4 files changed, 232 insertions(+), 95 deletions(-)

diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 2dd2f774dd8..c503467da25 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -188,6 +188,7 @@ pac7311		093a:2608	Trust WB-3300p
 pac7311		093a:260e	Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
 pac7311		093a:260f	SnakeCam
 pac7311		093a:2621	PAC731x
+pac7311		093a:2624	PAC7302
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
 vc032x		0ac8:0323	Vimicro Vc0323
diff --git a/drivers/media/video/gspca/pac207.c b/drivers/media/video/gspca/pac207.c
index a15bccad947..83b5f740c94 100644
--- a/drivers/media/video/gspca/pac207.c
+++ b/drivers/media/video/gspca/pac207.c
@@ -56,12 +56,6 @@ MODULE_LICENSE("GPL");
 #define PAC207_GAIN_KNEE		20
 
 #define PAC207_AUTOGAIN_DEADZONE	30
-/* We calculating the autogain at the end of the transfer of a frame, at this
-   moment a frame with the old settings is being transmitted, and a frame is
-   being captured with the old settings. So if we adjust the autogain we must
-   ignore atleast the 2 next frames for the new settings to come into effect
-   before doing any other adjustments */
-#define PAC207_AUTOGAIN_IGNORE_FRAMES	3
 
 /* specific webcam descriptor */
 struct sd {
@@ -338,6 +332,9 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 	pac207_write_reg(gspca_dev, 0x0f, 0x00); /* Power Control */
 }
 
+/* Include pac common sof detection functions */
+#include "pac_common.h"
+
 static void pac207_do_auto_gain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -351,12 +348,9 @@ static void pac207_do_auto_gain(struct gspca_dev *gspca_dev)
 	else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum,
 			100 + sd->brightness / 2, PAC207_AUTOGAIN_DEADZONE,
 			PAC207_GAIN_KNEE, PAC207_EXPOSURE_KNEE))
-		sd->autogain_ignore_frames = PAC207_AUTOGAIN_IGNORE_FRAMES;
+		sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
 }
 
-/* Include pac common sof detection functions */
-#include "pac_common.h"
-
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,
 			__u8 *data,
@@ -500,7 +494,7 @@ static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 		sd->gain = PAC207_GAIN_DEFAULT;
 		if (gspca_dev->streaming) {
 			sd->autogain_ignore_frames =
-				PAC207_AUTOGAIN_IGNORE_FRAMES;
+				PAC_AUTOGAIN_IGNORE_FRAMES;
 			setexposure(gspca_dev);
 			setgain(gspca_dev);
 		}
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index e22ca610334..14b98111cd9 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -44,6 +44,9 @@
    0x10/-	Master gain 0-31
    -/0x10	Another gain 0-15, limited influence (1-2x gain I guess)
    0x21		Bitfield: 0-1 unused, 2-3 vflip/hflip, 4-5 unknown, 6-7 unused
+   -/0x27	Seems to toggle various gains on / off, Setting bit 7 seems to
+		completely disable the analog amplification block. Set to 0x68
+		for max gain, 0x14 for minimal gain.
 */
 
 #define MODULE_NAME "pac7311"
@@ -61,6 +64,8 @@ struct sd {
 	unsigned char brightness;
 	unsigned char contrast;
 	unsigned char colors;
+	unsigned char gain;
+	unsigned char exposure;
 	unsigned char autogain;
 	__u8 hflip;
 	__u8 vflip;
@@ -88,8 +93,14 @@ static int sd_sethflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_gethflip(struct gspca_dev *gspca_dev, __s32 *val);
 static int sd_setvflip(struct gspca_dev *gspca_dev, __s32 val);
 static int sd_getvflip(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val);
 
 static struct ctrl sd_ctrls[] = {
+/* This control is pac7302 only */
+#define BRIGHTNESS_IDX 0
 	{
 	    {
 		.id      = V4L2_CID_BRIGHTNESS,
@@ -105,6 +116,7 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setbrightness,
 	    .get = sd_getbrightness,
 	},
+/* This control is for both the 7302 and the 7311 */
 	{
 	    {
 		.id      = V4L2_CID_CONTRAST,
@@ -120,6 +132,8 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setcontrast,
 	    .get = sd_getcontrast,
 	},
+/* This control is pac7302 only */
+#define SATURATION_IDX 2
 	{
 	    {
 		.id      = V4L2_CID_SATURATION,
@@ -135,6 +149,39 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setcolors,
 	    .get = sd_getcolors,
 	},
+/* All controls below are for both the 7302 and the 7311 */
+	{
+	    {
+		.id      = V4L2_CID_GAIN,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Gain",
+		.minimum = 0,
+#define GAIN_MAX 255
+		.maximum = GAIN_MAX,
+		.step    = 1,
+#define GAIN_DEF 127
+#define GAIN_KNEE 255 /* Gain seems to cause little noise on the pac73xx */
+		.default_value = GAIN_DEF,
+	    },
+	    .set = sd_setgain,
+	    .get = sd_getgain,
+	},
+	{
+	    {
+		.id      = V4L2_CID_EXPOSURE,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Exposure",
+		.minimum = 0,
+#define EXPOSURE_MAX 255
+		.maximum = EXPOSURE_MAX,
+		.step    = 1,
+#define EXPOSURE_DEF  16 /*  32 ms / 30 fps */
+#define EXPOSURE_KNEE 50 /* 100 ms / 10 fps */
+		.default_value = EXPOSURE_DEF,
+	    },
+	    .set = sd_setexposure,
+	    .get = sd_getexposure,
+	},
 	{
 	    {
 		.id      = V4L2_CID_AUTOGAIN,
@@ -149,8 +196,6 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_setautogain,
 	    .get = sd_getautogain,
 	},
-/* next controls work with pac7302 only */
-#define HFLIP_IDX 4
 	{
 	    {
 		.id      = V4L2_CID_HFLIP,
@@ -165,7 +210,6 @@ static struct ctrl sd_ctrls[] = {
 	    .set = sd_sethflip,
 	    .get = sd_gethflip,
 	},
-#define VFLIP_IDX 5
 	{
 	    {
 		.id      = V4L2_CID_VFLIP,
@@ -345,7 +389,7 @@ static const __u8 page4_7311[] = {
 	0x09, 0x00, 0xaa, 0xaa, 0x07, 0x00, 0x00, 0x62,
 	0x08, 0xaa, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x00, 0x00, 0x03, 0xa0, 0x01, 0xf4, 0xaa,
-	0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x01,
+	0xaa, 0x00, 0x08, 0xaa, 0x03, 0xaa, 0x00, 0x68,
 	0xca, 0x10, 0x06, 0x78, 0x00, 0x00, 0x00, 0x00,
 	0x23, 0x28, 0x04, 0x11, 0x00, 0x00
 };
@@ -374,7 +418,7 @@ static void reg_w(struct gspca_dev *gspca_dev,
 			usb_sndctrlpipe(gspca_dev->dev, 0),
 			0,			/* request */
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value, index, gspca_dev->usb_buf, 1,
+			0, index, gspca_dev->usb_buf, 1,
 			500);
 }
 
@@ -469,20 +513,22 @@ static int sd_config(struct gspca_dev *gspca_dev,
 
 		cam->cam_mode = vga_mode;
 		cam->nmodes = ARRAY_SIZE(vga_mode);
-		gspca_dev->ctrl_dis = (1 << HFLIP_IDX)
-				| (1 << VFLIP_IDX);
+		gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX)
+				| (1 << SATURATION_IDX);
 	}
 
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
 	sd->colors = COLOR_DEF;
+	sd->gain = GAIN_DEF;
+	sd->exposure = EXPOSURE_DEF;
 	sd->autogain = AUTOGAIN_DEF;
 	sd->hflip = HFLIP_DEF;
 	sd->vflip = VFLIP_DEF;
 	return 0;
 }
 
-/* rev 12a only */
+/* This function is used by pac7302 only */
 static void setbrightcont(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
@@ -509,67 +555,95 @@ static void setbrightcont(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0xdc, 0x01);
 }
 
-/* This function is used by pac7302 only */
-static void setbrightness(struct gspca_dev *gspca_dev)
+/* This function is used by pac7311 only */
+static void setcontrast(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int brightness;
-
-	if (sd->sensor == SENSOR_PAC7302) {
-		setbrightcont(gspca_dev);
-		return;
-	}
-/* HDG: this is not brightness but gain, I'll add gain and exposure controls
-   in a next patch */
-	return;
 
-	brightness = BRIGHTNESS_MAX - sd->brightness;
 	reg_w(gspca_dev, 0xff, 0x04);
-	reg_w(gspca_dev, 0x0e, 0x00);
-	reg_w(gspca_dev, 0x0f, brightness);
+	reg_w(gspca_dev, 0x10, sd->contrast >> 4);
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
-	PDEBUG(D_CONF|D_STREAM, "brightness: %i", brightness);
 }
 
-static void setcontrast(struct gspca_dev *gspca_dev)
+/* This function is used by pac7302 only */
+static void setcolors(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i, v;
+	static const int a[9] =
+		{217, -212, 0, -101, 170, -67, -38, -315, 355};
+	static const int b[9] =
+		{19, 106, 0, 19, 106, 1, 19, 106, 1};
+
+	reg_w(gspca_dev, 0xff, 0x03);	/* page 3 */
+	reg_w(gspca_dev, 0x11, 0x01);
+	reg_w(gspca_dev, 0xff, 0x00);	/* page 0 */
+	reg_w(gspca_dev, 0xff, 0x00);	/* page 0 */
+	for (i = 0; i < 9; i++) {
+		v = a[i] * sd->colors / COLOR_MAX + b[i];
+		reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07);
+		reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
+	}
+	reg_w(gspca_dev, 0xdc, 0x01);
+	PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
+}
+
+static void setgain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	if (sd->sensor == SENSOR_PAC7302) {
-		setbrightcont(gspca_dev);
-		return;
+		reg_w(gspca_dev, 0xff, 0x03);		/* page 3 */
+		reg_w(gspca_dev, 0x10, sd->gain >> 3);
+	} else {
+		int gain = GAIN_MAX - sd->gain;
+		if (gain < 1)
+			gain = 1;
+		else if (gain > 245)
+			gain = 245;
+		reg_w(gspca_dev, 0xff, 0x04);		/* page 4 */
+		reg_w(gspca_dev, 0x0e, 0x00);
+		reg_w(gspca_dev, 0x0f, gain);
 	}
-	reg_w(gspca_dev, 0xff, 0x04);
-	reg_w(gspca_dev, 0x10, sd->contrast >> 4);
 	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
 }
 
-/* This function is used by pac7302 only */
-static void setcolors(struct gspca_dev *gspca_dev)
+static void setexposure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	__u8 reg;
+
+	/* register 2 of frame 3/4 contains the clock divider configuring the
+	   no fps according to the formula: 60 / reg. sd->exposure is the
+	   desired exposure time in ms. */
+	reg = 120 * sd->exposure / 1000;
+	if (reg < 2)
+		reg = 2;
+	else if (reg > 63)
+		reg = 63;
 
 	if (sd->sensor == SENSOR_PAC7302) {
-		int i, v;
-		static const int a[9] =
-			{217, -212, 0, -101, 170, -67, -38, -315, 355};
-		static const int b[9] =
-			{19, 106, 0, 19, 106, 1, 19, 106, 1};
-
-		reg_w(gspca_dev, 0xff, 0x03);	/* page 3 */
-		reg_w(gspca_dev, 0x11, 0x01);
-		reg_w(gspca_dev, 0xff, 0x00);	/* page 0 */
-		reg_w(gspca_dev, 0xff, 0x00);	/* page 0 */
-		for (i = 0; i < 9; i++) {
-			v = a[i] * sd->colors / COLOR_MAX + b[i];
-			reg_w(gspca_dev, 0x0f + 2 * i, (v >> 8) & 0x07);
-			reg_w(gspca_dev, 0x0f + 2 * i + 1, v);
-		}
-		reg_w(gspca_dev, 0xdc, 0x01);
-		PDEBUG(D_CONF|D_STREAM, "color: %i", sd->colors);
+		/* On the pac7302 reg2 MUST be a multiple of 3, so round it to
+		   the nearest multiple of 3 */
+		reg = ((reg + 1) / 3) * 3;
+		reg_w(gspca_dev, 0xff, 0x03);		/* page 3 */
+		reg_w(gspca_dev, 0x02, reg);
+	} else {
+		reg_w(gspca_dev, 0xff, 0x04);		/* page 4 */
+		reg_w(gspca_dev, 0x02, reg);
+		/* Page 1 register 8 must always be 0x08 except when not in
+		   640x480 mode and Page3/4 reg 2 <= 3 then it must be 9 */
+		reg_w(gspca_dev, 0xff, 0x01);
+		if (gspca_dev->cam.cam_mode[(int)gspca_dev->curr_mode].priv &&
+				reg <= 3)
+			reg_w(gspca_dev, 0x08, 0x09);
+		else
+			reg_w(gspca_dev, 0x08, 0x08);
 	}
+	/* load registers to sensor (Bit 0, auto clear) */
+	reg_w(gspca_dev, 0x11, 0x01);
 }
 
 static void sethvflip(struct gspca_dev *gspca_dev)
@@ -579,14 +653,15 @@ static void sethvflip(struct gspca_dev *gspca_dev)
 
 	if (sd->sensor == SENSOR_PAC7302) {
 		reg_w(gspca_dev, 0xff, 0x03);		/* page 3 */
-		data = (sd->hflip ? 0x00 : 0x08)
+		data = (sd->hflip ? 0x08 : 0x00)
 			| (sd->vflip ? 0x04 : 0x00);
 	} else {
-		reg_w(gspca_dev, 0xff, 0x04);		/* page 3 */
+		reg_w(gspca_dev, 0xff, 0x04);		/* page 4 */
 		data = (sd->hflip ? 0x04 : 0x00)
 			| (sd->vflip ? 0x08 : 0x00);
 	}
 	reg_w(gspca_dev, 0x21, data);
+	/* load registers to sensor (Bit 0, auto clear) */
 	reg_w(gspca_dev, 0x11, 0x01);
 }
 
@@ -602,61 +677,49 @@ static void sd_start(struct gspca_dev *gspca_dev)
 
 	sd->sof_read = 0;
 
-	if (sd->sensor == SENSOR_PAC7302)
+	if (sd->sensor == SENSOR_PAC7302) {
 		reg_w_var(gspca_dev, start_7302);
-	else
+		setbrightcont(gspca_dev);
+		setcolors(gspca_dev);
+	} else {
 		reg_w_var(gspca_dev, start_7311);
-
-	setcontrast(gspca_dev);
-	setbrightness(gspca_dev);
-	setcolors(gspca_dev);
+		setcontrast(gspca_dev);
+	}
+	setgain(gspca_dev);
+	setexposure(gspca_dev);
+	sethvflip(gspca_dev);
 
 	/* set correct resolution */
 	switch (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv) {
 	case 2:					/* 160x120 pac7311 */
-		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x02, 0x03);
 		reg_w(gspca_dev, 0xff, 0x01);
-		reg_w(gspca_dev, 0x08, 0x09);
 		reg_w(gspca_dev, 0x17, 0x20);
-		reg_w(gspca_dev, 0x1b, 0x00);
 		reg_w(gspca_dev, 0x87, 0x10);
 		break;
 	case 1:					/* 320x240 pac7311 */
-		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x02, 0x03);
 		reg_w(gspca_dev, 0xff, 0x01);
-		reg_w(gspca_dev, 0x08, 0x09);
 		reg_w(gspca_dev, 0x17, 0x30);
 		reg_w(gspca_dev, 0x87, 0x11);
 		break;
 	case 0:					/* 640x480 */
 		if (sd->sensor == SENSOR_PAC7302)
 			break;
-		reg_w(gspca_dev, 0xff, 0x04);
-		reg_w(gspca_dev, 0x02, 0x07);
 		reg_w(gspca_dev, 0xff, 0x01);
-		reg_w(gspca_dev, 0x08, 0x08);
 		reg_w(gspca_dev, 0x17, 0x00);
 		reg_w(gspca_dev, 0x87, 0x12);
 		break;
 	}
 
-	/* start stream */
-	reg_w(gspca_dev, 0xff, 0x01);
-	if (sd->sensor == SENSOR_PAC7302) {
-		sethvflip(gspca_dev);
-		reg_w(gspca_dev, 0x78, 0x01);
-		reg_w(gspca_dev, 0xff, 0x01);
-		reg_w(gspca_dev, 0x78, 0x01);
-	} else {
-		reg_w(gspca_dev, 0x78, 0x44);
-		reg_w(gspca_dev, 0x78, 0x45);
-	}
-
 	sd->sof_read = 0;
 	sd->autogain_ignore_frames = 0;
 	atomic_set(&sd->avg_lum, -1);
+
+	/* start stream */
+	reg_w(gspca_dev, 0xff, 0x01);
+	if (sd->sensor == SENSOR_PAC7302)
+		reg_w(gspca_dev, 0x78, 0x01);
+	else
+		reg_w(gspca_dev, 0x78, 0x05);
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
@@ -691,8 +754,28 @@ static void sd_stop0(struct gspca_dev *gspca_dev)
 	}
 }
 
+/* Include pac common sof detection functions */
+#include "pac_common.h"
+
 static void do_autogain(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+	int avg_lum = atomic_read(&sd->avg_lum);
+	int desired_lum;
+
+	if (avg_lum == -1)
+		return;
+
+	if (sd->sensor == SENSOR_PAC7302)
+		desired_lum = 70 + sd->brightness * 2;
+	else
+		desired_lum = 200;
+
+	if (sd->autogain_ignore_frames > 0)
+		sd->autogain_ignore_frames--;
+	else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum,
+			10, GAIN_KNEE, EXPOSURE_KNEE))
+		sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
 }
 
 static const unsigned char pac7311_jpeg_header1[] = {
@@ -704,9 +787,6 @@ static const unsigned char pac7311_jpeg_header2[] = {
   0x00, 0x0c, 0x03, 0x01, 0x00, 0x02, 0x11, 0x03, 0x11, 0x00, 0x3f, 0x00
 };
 
-/* Include pac common sof detection functions */
-#include "pac_common.h"
-
 /* this function is run at interrupt level */
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			struct gspca_frame *frame,	/* target */
@@ -790,7 +870,7 @@ static int sd_setbrightness(struct gspca_dev *gspca_dev, __s32 val)
 
 	sd->brightness = val;
 	if (gspca_dev->streaming)
-		setbrightness(gspca_dev);
+		setbrightcont(gspca_dev);
 	return 0;
 }
 
@@ -807,8 +887,12 @@ static int sd_setcontrast(struct gspca_dev *gspca_dev, __s32 val)
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->contrast = val;
-	if (gspca_dev->streaming)
-		setcontrast(gspca_dev);
+	if (gspca_dev->streaming) {
+		if (sd->sensor == SENSOR_PAC7302)
+			setbrightcont(gspca_dev);
+		else
+			setcontrast(gspca_dev);
+	}
 	return 0;
 }
 
@@ -838,11 +922,61 @@ static int sd_getcolors(struct gspca_dev *gspca_dev, __s32 *val)
 	return 0;
 }
 
+static int sd_setgain(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gain = val;
+	if (gspca_dev->streaming)
+		setgain(gspca_dev);
+	return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->gain;
+	return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->exposure = val;
+	if (gspca_dev->streaming)
+		setexposure(gspca_dev);
+	return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	*val = sd->exposure;
+	return 0;
+}
+
 static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
 	sd->autogain = val;
+	/* when switching to autogain set defaults to make sure
+	   we are on a valid point of the autogain gain /
+	   exposure knee graph, and give this change time to
+	   take effect before doing autogain. */
+	if (sd->autogain) {
+		sd->exposure = EXPOSURE_DEF;
+		sd->gain = GAIN_DEF;
+		if (gspca_dev->streaming) {
+			sd->autogain_ignore_frames =
+				PAC_AUTOGAIN_IGNORE_FRAMES;
+			setexposure(gspca_dev);
+			setgain(gspca_dev);
+		}
+	}
 
 	return 0;
 }
@@ -914,6 +1048,7 @@ static __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x093a, 0x260e), .driver_info = SENSOR_PAC7311},
 	{USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311},
 	{USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302},
+	{USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
diff --git a/drivers/media/video/gspca/pac_common.h b/drivers/media/video/gspca/pac_common.h
index a19b5d44c00..34d4b1494cd 100644
--- a/drivers/media/video/gspca/pac_common.h
+++ b/drivers/media/video/gspca/pac_common.h
@@ -23,6 +23,13 @@
  *
  */
 
+/* We calculate the autogain at the end of the transfer of a frame, at this
+   moment a frame with the old settings is being transmitted, and a frame is
+   being captured with the old settings. So if we adjust the autogain we must
+   ignore atleast the 2 next frames for the new settings to come into effect
+   before doing any other adjustments */
+#define PAC_AUTOGAIN_IGNORE_FRAMES	3
+
 static const unsigned char pac_sof_marker[5] =
 		{ 0xff, 0xff, 0x00, 0xff, 0x96 };
 
@@ -37,7 +44,7 @@ static unsigned char *pac_find_sof(struct gspca_dev *gspca_dev,
 		if (m[i] == pac_sof_marker[sd->sof_read]) {
 			sd->sof_read++;
 			if (sd->sof_read == sizeof(pac_sof_marker)) {
-				PDEBUG(D_STREAM,
+				PDEBUG(D_FRAM,
 					"SOF found, bytes to analyze: %u."
 					" Frame starts at byte #%u",
 					len, i + 1);
-- 
GitLab


From 086272555d1b7936512de1e6d9efacdf87169cb0 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:17 -0300
Subject: [PATCH 748/869] V4L/DVB (8826): gspca: Webcam Labtec 2200 (093a:2626)
 added in pac7311.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 Documentation/video4linux/gspca.txt | 1 +
 drivers/media/video/gspca/pac7311.c | 1 +
 2 files changed, 2 insertions(+)

diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index c503467da25..0f03900c48f 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -189,6 +189,7 @@ pac7311		093a:260e	Gigaware VGA PC Camera, Trust WB-3350p, SIGMA cam 2350
 pac7311		093a:260f	SnakeCam
 pac7311		093a:2621	PAC731x
 pac7311		093a:2624	PAC7302
+pac7311		093a:2626	Labtec 2200
 zc3xx		0ac8:0302	Z-star Vimicro zc0302
 vc032x		0ac8:0321	Vimicro generic vc0321
 vc032x		0ac8:0323	Vimicro Vc0323
diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 14b98111cd9..35244cf9851 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -1049,6 +1049,7 @@ static __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x093a, 0x260f), .driver_info = SENSOR_PAC7311},
 	{USB_DEVICE(0x093a, 0x2621), .driver_info = SENSOR_PAC7302},
 	{USB_DEVICE(0x093a, 0x2624), .driver_info = SENSOR_PAC7302},
+	{USB_DEVICE(0x093a, 0x2626), .driver_info = SENSOR_PAC7302},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
-- 
GitLab


From 038ec7c772cb093411b163c22f389787722cfd8e Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:18 -0300
Subject: [PATCH 749/869] V4L/DVB (8827): gspca: Stop pac7302 autogain
 oscillation.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/pac7311.c | 48 +++++++++++++++++------------
 1 file changed, 29 insertions(+), 19 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 35244cf9851..723219d4964 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -39,7 +39,7 @@
 
    Address	Description
    0x02		Clock divider 2-63, fps =~ 60 / val. Must be a multiple of 3 on
-		the 7302, so one of 3, 6, 9, ...
+		the 7302, so one of 3, 6, 9, ..., except when between 6 and 12?
    -/0x0f	Master gain 1-245, low value = high gain
    0x10/-	Master gain 0-31
    -/0x10	Another gain 0-15, limited influence (1-2x gain I guess)
@@ -626,8 +626,9 @@ static void setexposure(struct gspca_dev *gspca_dev)
 
 	if (sd->sensor == SENSOR_PAC7302) {
 		/* On the pac7302 reg2 MUST be a multiple of 3, so round it to
-		   the nearest multiple of 3 */
-		reg = ((reg + 1) / 3) * 3;
+		   the nearest multiple of 3, except when between 6 and 12? */
+		if (reg < 6 || reg > 12)
+			reg = ((reg + 1) / 3) * 3;
 		reg_w(gspca_dev, 0xff, 0x03);		/* page 3 */
 		reg_w(gspca_dev, 0x02, reg);
 	} else {
@@ -761,20 +762,32 @@ static void do_autogain(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int avg_lum = atomic_read(&sd->avg_lum);
-	int desired_lum;
+	int desired_lum, deadzone;
 
 	if (avg_lum == -1)
 		return;
 
-	if (sd->sensor == SENSOR_PAC7302)
-		desired_lum = 70 + sd->brightness * 2;
-	else
+	if (sd->sensor == SENSOR_PAC7302) {
+		desired_lum = 270 + sd->brightness * 4;
+		/* Hack hack, with the 7202 the first exposure step is
+		   pretty large, so if we're about to make the first
+		   exposure increase make the deadzone large to avoid
+		   oscilating */
+		if (desired_lum > avg_lum && sd->gain == GAIN_DEF &&
+				sd->exposure > EXPOSURE_DEF &&
+				sd->exposure < 42)
+			deadzone = 90;
+		else
+			deadzone = 30;
+	} else {
 		desired_lum = 200;
+		deadzone = 20;
+	}
 
 	if (sd->autogain_ignore_frames > 0)
 		sd->autogain_ignore_frames--;
 	else if (gspca_auto_gain_n_exposure(gspca_dev, avg_lum, desired_lum,
-			10, GAIN_KNEE, EXPOSURE_KNEE))
+			deadzone, GAIN_KNEE, EXPOSURE_KNEE))
 		sd->autogain_ignore_frames = PAC_AUTOGAIN_IGNORE_FRAMES;
 }
 
@@ -802,7 +815,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 		int n, lum_offset, footer_length;
 
 		if (sd->sensor == SENSOR_PAC7302) {
-		  lum_offset = 34 + sizeof pac_sof_marker;
+		  /* 6 bytes after the FF D9 EOF marker a number of lumination
+		     bytes are send corresponding to different parts of the
+		     image, the 14th and 15th byte after the EOF seem to
+		     correspond to the center of the image */
+		  lum_offset = 61 + sizeof pac_sof_marker;
 		  footer_length = 74;
 		} else {
 		  lum_offset = 24 + sizeof pac_sof_marker;
@@ -829,18 +846,11 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 
 		/* Get average lumination */
 		if (gspca_dev->last_packet_type == LAST_PACKET &&
-				n >= lum_offset) {
-			if (sd->sensor == SENSOR_PAC7302)
-				atomic_set(&sd->avg_lum,
-						(data[-lum_offset] << 8) |
-						data[-lum_offset + 1]);
-			else
-				atomic_set(&sd->avg_lum,
-						data[-lum_offset] +
+				n >= lum_offset)
+			atomic_set(&sd->avg_lum, data[-lum_offset] +
 						data[-lum_offset + 1]);
-		} else {
+		else
 			atomic_set(&sd->avg_lum, -1);
-		}
 
 		/* Start the new frame with the jpeg header */
 		gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
-- 
GitLab


From 91de65ac00f976c972940bedd9dbfe38bb8bfec3 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:18 -0300
Subject: [PATCH 750/869] V4L/DVB (8828): gspca: Set the clock at the end of
 initialization in sonixj.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixj.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 5380b4323a7..feb17dbdd7b 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -444,7 +444,7 @@ static const __u8 ov7630_sensor_init[][8] = {
 	{0xa1, 0x21, 0x2b, 0x34, 0x00, 0x00, 0x00, 0x10},
 /* */
 	{0xa1, 0x21, 0x10, 0x83, 0x00, 0x00, 0x00, 0x10},
-	{0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10},
+/*	{0xb1, 0x21, 0x01, 0x88, 0x70, 0x00, 0x00, 0x10}, */
 	{}
 };
 static const __u8 ov7660_sensor_init[][8] = {
@@ -811,6 +811,13 @@ static int configure_gpio(struct gspca_dev *gspca_dev,
 		reg_w1(gspca_dev, 0x17, 0xae);
 		reg_w1(gspca_dev, 0x01, 0x42);
 		break;
+/*jfm: from win trace */
+	case SENSOR_OV7660:
+		reg_w1(gspca_dev, 0x01, 0x61);
+		reg_w1(gspca_dev, 0x17, 0x20);
+		reg_w1(gspca_dev, 0x01, 0x60);
+		reg_w1(gspca_dev, 0x01, 0x40);
+		break;
 	default:
 		reg_w1(gspca_dev, 0x01, 0x43);
 		reg_w1(gspca_dev, 0x17, 0x61);
@@ -1076,7 +1083,7 @@ static void setbrightcont(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	unsigned val;
-	__u8 reg84_full[13];
+	__u8 reg84_full[0x15];
 
 	memset(reg84_full, 0, sizeof reg84_full);
 	val = sd->contrast * 0x20 / CONTRAST_MAX + 0x10;	/* 10..30 */
@@ -1088,7 +1095,7 @@ static void setbrightcont(struct gspca_dev *gspca_dev)
 			/ BRIGHTNESS_MAX;
 	else
 		val = 0;
-	reg84_full[10] = val;			/* 00..1f */
+	reg84_full[0x12] = val;			/* 00..1f */
 	reg_w(gspca_dev, 0x84, reg84_full, sizeof reg84_full);
 }
 
@@ -1184,7 +1191,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	sn9c1xx = sn_tb[(int) sd->sensor];
 	configure_gpio(gspca_dev, sn9c1xx);
 
-/*	reg_w1(gspca_dev, 0x01, 0x44);		jfm from win trace*/
 	reg_w1(gspca_dev, 0x15, sn9c1xx[0x15]);
 	reg_w1(gspca_dev, 0x16, sn9c1xx[0x16]);
 	reg_w1(gspca_dev, 0x12, sn9c1xx[0x12]);
@@ -1300,7 +1306,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	reg_w1(gspca_dev, 0x18, reg18);
 
 	reg_w1(gspca_dev, 0x17, reg17);
-	reg_w1(gspca_dev, 0x01, reg1);
 	switch (sd->sensor) {
 	case SENSOR_HV7131R:
 	case SENSOR_MI0360:
@@ -1314,6 +1319,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		break;
 	}
 	setautogain(gspca_dev);
+	reg_w1(gspca_dev, 0x01, reg1);
 }
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
-- 
GitLab


From 8295d99ee5340f1e62b53c8adc979e0789299445 Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:19 -0300
Subject: [PATCH 751/869] V4L/DVB (8829): gspca: Have a clean kmalloc-ated
 buffer for USB exchanges.

The USB buffer may be used for DMA and there may be a caching problem
if the buffer is part of the device structure.
Thanks to Alan Stern.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/conex.c   |   4 +-
 drivers/media/video/gspca/etoms.c   |   4 +-
 drivers/media/video/gspca/gspca.c   |   8 ++
 drivers/media/video/gspca/gspca.h   |   3 +-
 drivers/media/video/gspca/mars.c    |  21 +---
 drivers/media/video/gspca/sonixb.c  |  24 +----
 drivers/media/video/gspca/sonixj.c  |  43 ++++----
 drivers/media/video/gspca/sunplus.c | 147 +++++++++++++++-------------
 drivers/media/video/gspca/t613.c    |   2 +-
 9 files changed, 116 insertions(+), 140 deletions(-)

diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 3db5c1e3283..8c91ffde953 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -124,7 +124,7 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	struct usb_device *dev = gspca_dev->dev;
 
 #ifdef GSPCA_DEBUG
-	if (len > sizeof gspca_dev->usb_buf) {
+	if (len > USB_BUF_SZ) {
 		err("reg_r: buffer overflow");
 		return;
 	}
@@ -164,7 +164,7 @@ static void reg_w(struct gspca_dev *gspca_dev,
 	struct usb_device *dev = gspca_dev->dev;
 
 #ifdef GSPCA_DEBUG
-	if (len > sizeof gspca_dev->usb_buf) {
+	if (len > USB_BUF_SZ) {
 		err("reg_w: buffer overflow");
 		return;
 	}
diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index c03b1f45de1..9eb6adb24bd 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -235,7 +235,7 @@ static void reg_r(struct gspca_dev *gspca_dev,
 	struct usb_device *dev = gspca_dev->dev;
 
 #ifdef GSPCA_DEBUG
-	if (len > sizeof gspca_dev->usb_buf) {
+	if (len > USB_BUF_SZ) {
 		err("reg_r: buffer overflow");
 		return;
 	}
@@ -273,7 +273,7 @@ static void reg_w(struct gspca_dev *gspca_dev,
 	struct usb_device *dev = gspca_dev->dev;
 
 #ifdef GSPCA_DEBUG
-	if (len > sizeof gspca_dev->usb_buf) {
+	if (len > USB_BUF_SZ) {
 		err("reg_w: buffer overflow");
 		return;
 	}
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 42b0b83d095..7be69284da0 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -1731,6 +1731,12 @@ int gspca_dev_probe(struct usb_interface *intf,
 		err("couldn't kzalloc gspca struct");
 		return -EIO;
 	}
+	gspca_dev->usb_buf = kmalloc(USB_BUF_SZ, GFP_KERNEL);
+	if (!gspca_dev->usb_buf) {
+		err("out of memory");
+		ret = -EIO;
+		goto out;
+	}
 	gspca_dev->dev = dev;
 	gspca_dev->iface = interface->bInterfaceNumber;
 	gspca_dev->nbalt = intf->num_altsetting;
@@ -1774,6 +1780,7 @@ int gspca_dev_probe(struct usb_interface *intf,
 	PDEBUG(D_PROBE, "probe ok");
 	return 0;
 out:
+	kfree(gspca_dev->usb_buf);
 	kfree(gspca_dev);
 	return ret;
 }
@@ -1806,6 +1813,7 @@ void gspca_disconnect(struct usb_interface *intf)
 /* We don't want people trying to open up the device */
 	video_unregister_device(&gspca_dev->vdev);
 /* Free the memory */
+	kfree(gspca_dev->usb_buf);
 	kfree(gspca_dev);
 	PDEBUG(D_PROBE, "disconnect complete");
 }
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index 7c2f44b2397..c17625cff9b 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -127,7 +127,8 @@ struct gspca_dev {
 	const struct sd_desc *sd_desc;		/* subdriver description */
 	unsigned ctrl_dis;		/* disabled controls (bit map) */
 
-	__u8 usb_buf[8];			/* buffer for USB exchanges */
+#define USB_BUF_SZ 64
+	__u8 *usb_buf;				/* buffer for USB exchanges */
 	struct urb *urb[MAX_NURBS];
 
 	__u8 *frbuf;				/* buffer for nframes */
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 281475913a6..4d5db47ba8c 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -100,22 +100,6 @@ static int reg_w(struct gspca_dev *gspca_dev,
 	return rc;
 }
 
-static int reg_w_buf(struct gspca_dev *gspca_dev,
-			__u16 index, __u8 *buf, int len)
-{
-	int rc;
-
-	rc = usb_control_msg(gspca_dev->dev,
-			 usb_sndbulkpipe(gspca_dev->dev, 4),
-			 0x12,
-			 0xc8,		/* ?? */
-			 0,		/* value */
-			 index, buf, len, 500);
-	if (rc < 0)
-		PDEBUG(D_ERR, "reg write [%02x] error %d", index, rc);
-	return rc;
-}
-
 static void bulk_w(struct gspca_dev *gspca_dev,
 		   __u16 *pch,
 		   __u16 Address)
@@ -175,7 +159,6 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	/*
 	   Initialize the MR97113 chip register
 	 */
-	data = kmalloc(16, GFP_KERNEL);
 	data[0] = 0x00;		/* address */
 	data[1] = 0x0c | 0x01;	/* reg 0 */
 	data[2] = 0x01;		/* reg 1 */
@@ -195,12 +178,10 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	data[10] = 0x5d;	/* reg 9, I2C device address
 				 *	[for PAS5101 (0x40)] [for MI (0x5d)] */
 
-	err_code = reg_w_buf(gspca_dev, data[0], data, 11);
-	kfree(data);
+	err_code = reg_w(gspca_dev, data[0], 11);
 	if (err_code < 0)
 		return;
 
-	data = gspca_dev->usb_buf;
 	data[0] = 0x23;		/* address */
 	data[1] = 0x09;		/* reg 35, append frame header */
 
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 044a9ec58db..162beb3fead 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -410,7 +410,7 @@ static void reg_w(struct gspca_dev *gspca_dev,
 		  int len)
 {
 #ifdef GSPCA_DEBUG
-	if (len > sizeof gspca_dev->usb_buf) {
+	if (len > USB_BUF_SZ) {
 		PDEBUG(D_ERR|D_PACK, "reg_w: buffer overflow");
 		return;
 	}
@@ -426,26 +426,6 @@ static void reg_w(struct gspca_dev *gspca_dev,
 			500);
 }
 
-static void reg_w_big(struct gspca_dev *gspca_dev,
-		  __u16 value,
-		  const __u8 *buffer,
-		  int len)
-{
-	__u8 *tmpbuf;
-
-	tmpbuf = kmalloc(len, GFP_KERNEL);
-	memcpy(tmpbuf, buffer, len);
-	usb_control_msg(gspca_dev->dev,
-			usb_sndctrlpipe(gspca_dev->dev, 0),
-			0x08,			/* request */
-			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-			value,
-			0,			/* index */
-			tmpbuf, len,
-			500);
-	kfree(tmpbuf);
-}
-
 static int i2c_w(struct gspca_dev *gspca_dev, const __u8 *buffer)
 {
 	int retry = 60;
@@ -886,7 +866,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	/* reg 0x17 SensorClk enable inv Clk 0x60 */
 	reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1);
 	/* Set the registers from the template */
-	reg_w_big(gspca_dev, 0x01, sn9c10x, l);
+	reg_w(gspca_dev, 0x01, sn9c10x, l);
 	switch (sd->sensor) {
 	case SENSOR_HV7131R:
 		i2c_w_vector(gspca_dev, hv7131_sensor_init,
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index feb17dbdd7b..5697959e724 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -613,10 +613,16 @@ static const __u8 qtable4[] = {
 	0x29, 0x29, 0x29, 0x29
 };
 
-/* read <len> bytes (len < sizeof gspca_dev->usb_buf) to gspca_dev->usb_buf */
+/* read <len> bytes to gspca_dev->usb_buf */
 static void reg_r(struct gspca_dev *gspca_dev,
 		  __u16 value, int len)
 {
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
+		err("reg_r: buffer overflow");
+		return;
+	}
+#endif
 	usb_control_msg(gspca_dev->dev,
 			usb_rcvctrlpipe(gspca_dev->dev, 0),
 			0,
@@ -649,29 +655,20 @@ static void reg_w(struct gspca_dev *gspca_dev,
 {
 	PDEBUG(D_USBO, "reg_w [%02x] = %02x %02x ..",
 		value, buffer[0], buffer[1]);
-	if (len <= sizeof gspca_dev->usb_buf) {
-		memcpy(gspca_dev->usb_buf, buffer, len);
-		usb_control_msg(gspca_dev->dev,
-				usb_sndctrlpipe(gspca_dev->dev, 0),
-				0x08,
-			   USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-				value, 0,
-				gspca_dev->usb_buf, len,
-				500);
-	} else {
-		__u8 *tmpbuf;
-
-		tmpbuf = kmalloc(len, GFP_KERNEL);
-		memcpy(tmpbuf, buffer, len);
-		usb_control_msg(gspca_dev->dev,
-				usb_sndctrlpipe(gspca_dev->dev, 0),
-				0x08,
-			   USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
-				value, 0,
-				tmpbuf, len,
-				500);
-		kfree(tmpbuf);
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
+		err("reg_w: buffer overflow");
+		return;
 	}
+#endif
+	memcpy(gspca_dev->usb_buf, buffer, len);
+	usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
+			0x08,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			value, 0,
+			gspca_dev->usb_buf, len,
+			500);
 }
 
 /* I2C write 1 byte */
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index bddf73360c2..1cfcc6c4955 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -449,31 +449,47 @@ static const __u8 qtable_spca504_default[2][64] = {
 	 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e, 0x1e}
 };
 
-static void reg_r(struct usb_device *dev,
-			   __u16 req,
-			   __u16 index,
-			   __u8 *buffer, __u16 length)
+/* read <len> bytes to gspca_dev->usb_buf */
+static void reg_r(struct gspca_dev *gspca_dev,
+		  __u16 req,
+		  __u16 index,
+		  __u16 len)
 {
-	usb_control_msg(dev,
-			usb_rcvctrlpipe(dev, 0),
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
+		err("reg_r: buffer overflow");
+		return;
+	}
+#endif
+	usb_control_msg(gspca_dev->dev,
+			usb_rcvctrlpipe(gspca_dev->dev, 0),
 			req,
 			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 			0,		/* value */
-			index, buffer, length,
+			index,
+			len ? gspca_dev->usb_buf : NULL, len,
 			500);
 }
 
-static void reg_w(struct usb_device *dev,
-			    __u16 req,
-			    __u16 value,
-			    __u16 index,
-			    __u8 *buffer, __u16 length)
+/* write <len> bytes from gspca_dev->usb_buf */
+static void reg_w(struct gspca_dev *gspca_dev,
+		   __u16 req,
+		   __u16 value,
+		   __u16 index,
+		   __u16 len)
 {
-	usb_control_msg(dev,
-			usb_sndctrlpipe(dev, 0),
+#ifdef GSPCA_DEBUG
+	if (len > USB_BUF_SZ) {
+		err("reg_w: buffer overflow");
+		return;
+	}
+#endif
+	usb_control_msg(gspca_dev->dev,
+			usb_sndctrlpipe(gspca_dev->dev, 0),
 			req,
 			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-			value, index, buffer, length,
+			value, index,
+			len ? gspca_dev->usb_buf : NULL, len,
 			500);
 }
 
@@ -634,7 +650,7 @@ static int spca504B_PollingDataReady(struct gspca_dev *gspca_dev)
 	int count = 10;
 
 	while (--count > 0) {
-		reg_r(gspca_dev->dev, 0x21, 0, gspca_dev->usb_buf, 1);
+		reg_r(gspca_dev, 0x21, 0, 1);
 		if ((gspca_dev->usb_buf[0] & 0x01) == 0)
 			break;
 		msleep(10);
@@ -644,15 +660,14 @@ static int spca504B_PollingDataReady(struct gspca_dev *gspca_dev)
 
 static void spca504B_WaitCmdStatus(struct gspca_dev *gspca_dev)
 {
-	struct usb_device *dev = gspca_dev->dev;
 	int count = 50;
 
 	while (--count > 0) {
-		reg_r(dev, 0x21, 1, gspca_dev->usb_buf, 1);
+		reg_r(gspca_dev, 0x21, 1, 1);
 		if (gspca_dev->usb_buf[0] != 0) {
 			gspca_dev->usb_buf[0] = 0;
-			reg_w(dev, 0x21, 0, 1, gspca_dev->usb_buf, 1);
-			reg_r(dev, 0x21, 1, gspca_dev->usb_buf, 1);
+			reg_w(gspca_dev, 0x21, 0, 1, 1);
+			reg_r(gspca_dev, 0x21, 1, 1);
 			spca504B_PollingDataReady(gspca_dev);
 			break;
 		}
@@ -662,16 +677,14 @@ static void spca504B_WaitCmdStatus(struct gspca_dev *gspca_dev)
 
 static void spca50x_GetFirmware(struct gspca_dev *gspca_dev)
 {
-	struct usb_device *dev = gspca_dev->dev;
 	__u8 *data;
 
-	data = kmalloc(64, GFP_KERNEL);
-	reg_r(dev, 0x20, 0, data, 5);
+	data = gspca_dev->usb_buf;
+	reg_r(gspca_dev, 0x20, 0, 5);
 	PDEBUG(D_STREAM, "FirmWare : %d %d %d %d %d ",
 		data[0], data[1], data[2], data[3], data[4]);
-	reg_r(dev, 0x23, 0, data, 64);
-	reg_r(dev, 0x23, 1, data, 64);
-	kfree(data);
+	reg_r(gspca_dev, 0x23, 0, 64);
+	reg_r(gspca_dev, 0x23, 1, 64);
 }
 
 static void spca504B_SetSizeType(struct gspca_dev *gspca_dev)
@@ -686,21 +699,21 @@ static void spca504B_SetSizeType(struct gspca_dev *gspca_dev)
 	Type = 0;
 	switch (sd->bridge) {
 	case BRIDGE_SPCA533:
-		reg_w(dev, 0x31, 0, 0, NULL, 0);
+		reg_w(gspca_dev, 0x31, 0, 0, 0);
 		spca504B_WaitCmdStatus(gspca_dev);
 		rc = spca504B_PollingDataReady(gspca_dev);
 		spca50x_GetFirmware(gspca_dev);
 		gspca_dev->usb_buf[0] = 2;			/* type */
-		reg_w(dev, 0x24, 0, 8, gspca_dev->usb_buf, 1);
-		reg_r(dev, 0x24, 8, gspca_dev->usb_buf, 1);
+		reg_w(gspca_dev, 0x24, 0, 8, 1);
+		reg_r(gspca_dev, 0x24, 8, 1);
 
 		gspca_dev->usb_buf[0] = Size;
-		reg_w(dev, 0x25, 0, 4, gspca_dev->usb_buf, 1);
-		reg_r(dev, 0x25, 4, gspca_dev->usb_buf, 1);	/* size */
+		reg_w(gspca_dev, 0x25, 0, 4, 1);
+		reg_r(gspca_dev, 0x25, 4, 1);			/* size */
 		rc = spca504B_PollingDataReady(gspca_dev);
 
 		/* Init the cam width height with some values get on init ? */
-		reg_w(dev, 0x31, 0, 4, NULL, 0);
+		reg_w(gspca_dev, 0x31, 0, 4, 0);
 		spca504B_WaitCmdStatus(gspca_dev);
 		rc = spca504B_PollingDataReady(gspca_dev);
 		break;
@@ -708,12 +721,12 @@ static void spca504B_SetSizeType(struct gspca_dev *gspca_dev)
 /* case BRIDGE_SPCA504B: */
 /* case BRIDGE_SPCA536: */
 		gspca_dev->usb_buf[0] = Size;
-		reg_w(dev, 0x25, 0, 4, gspca_dev->usb_buf, 1);
-		reg_r(dev, 0x25, 4, gspca_dev->usb_buf, 1);	/* size */
+		reg_w(gspca_dev, 0x25, 0, 4, 1);
+		reg_r(gspca_dev, 0x25, 4, 1);			/* size */
 		Type = 6;
 		gspca_dev->usb_buf[0] = Type;
-		reg_w(dev, 0x27, 0, 0, gspca_dev->usb_buf, 1);
-		reg_r(dev, 0x27, 0, gspca_dev->usb_buf, 1);	/* type */
+		reg_w(gspca_dev, 0x27, 0, 0, 1);
+		reg_r(gspca_dev, 0x27, 0, 1);			/* type */
 		rc = spca504B_PollingDataReady(gspca_dev);
 		break;
 	case BRIDGE_SPCA504:
@@ -752,18 +765,15 @@ static void spca504_wait_status(struct gspca_dev *gspca_dev)
 
 static void spca504B_setQtable(struct gspca_dev *gspca_dev)
 {
-	struct usb_device *dev = gspca_dev->dev;
-
 	gspca_dev->usb_buf[0] = 3;
-	reg_w(dev, 0x26, 0, 0, gspca_dev->usb_buf, 1);
-	reg_r(dev, 0x26, 0, gspca_dev->usb_buf, 1);
+	reg_w(gspca_dev, 0x26, 0, 0, 1);
+	reg_r(gspca_dev, 0x26, 0, 1);
 	spca504B_PollingDataReady(gspca_dev);
 }
 
 static void sp5xx_initContBrigHueRegisters(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	int pollreg = 1;
 
 	switch (sd->bridge) {
@@ -774,20 +784,20 @@ static void sp5xx_initContBrigHueRegisters(struct gspca_dev *gspca_dev)
 	default:
 /*	case BRIDGE_SPCA533: */
 /*	case BRIDGE_SPCA504B: */
-		reg_w(dev, 0, 0, 0x21a7, NULL, 0);	/* brightness */
-		reg_w(dev, 0, 0x20, 0x21a8, NULL, 0);	/* contrast */
-		reg_w(dev, 0, 0, 0x21ad, NULL, 0);	/* hue */
-		reg_w(dev, 0, 1, 0x21ac, NULL, 0);	/* sat/hue */
-		reg_w(dev, 0, 0x20, 0x21ae, NULL, 0);	/* saturation */
-		reg_w(dev, 0, 0, 0x21a3, NULL, 0);	/* gamma */
+		reg_w(gspca_dev, 0, 0, 0x21a7, 0);	/* brightness */
+		reg_w(gspca_dev, 0, 0x20, 0x21a8, 0);	/* contrast */
+		reg_w(gspca_dev, 0, 0, 0x21ad, 0);	/* hue */
+		reg_w(gspca_dev, 0, 1, 0x21ac, 0);	/* sat/hue */
+		reg_w(gspca_dev, 0, 0x20, 0x21ae, 0);	/* saturation */
+		reg_w(gspca_dev, 0, 0, 0x21a3, 0);	/* gamma */
 		break;
 	case BRIDGE_SPCA536:
-		reg_w(dev, 0, 0, 0x20f0, NULL, 0);
-		reg_w(dev, 0, 0x21, 0x20f1, NULL, 0);
-		reg_w(dev, 0, 0x40, 0x20f5, NULL, 0);
-		reg_w(dev, 0, 1, 0x20f4, NULL, 0);
-		reg_w(dev, 0, 0x40, 0x20f6, NULL, 0);
-		reg_w(dev, 0, 0, 0x2089, NULL, 0);
+		reg_w(gspca_dev, 0, 0, 0x20f0, 0);
+		reg_w(gspca_dev, 0, 0x21, 0x20f1, 0);
+		reg_w(gspca_dev, 0, 0x40, 0x20f5, 0);
+		reg_w(gspca_dev, 0, 1, 0x20f4, 0);
+		reg_w(gspca_dev, 0, 0x40, 0x20f6, 0);
+		reg_w(gspca_dev, 0, 0, 0x2089, 0);
 		break;
 	}
 	if (pollreg)
@@ -799,7 +809,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 			const struct usb_device_id *id)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	struct usb_device *dev = gspca_dev->dev;
 	struct cam *cam;
 
 	cam = &gspca_dev->cam;
@@ -811,7 +820,7 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	if (sd->subtype == AiptekMiniPenCam13) {
 /* try to get the firmware as some cam answer 2.0.1.2.2
  * and should be a spca504b then overwrite that setting */
-		reg_r(dev, 0x20, 0, gspca_dev->usb_buf, 1);
+		reg_r(gspca_dev, 0x20, 0, 1);
 		switch (gspca_dev->usb_buf[0]) {
 		case 1:
 			break;		/* (right bridge/subtype) */
@@ -860,12 +869,12 @@ static int sd_init(struct gspca_dev *gspca_dev)
 
 	switch (sd->bridge) {
 	case BRIDGE_SPCA504B:
-		reg_w(dev, 0x1d, 0, 0, NULL, 0);
-		reg_w(dev, 0, 1, 0x2306, NULL, 0);
-		reg_w(dev, 0, 0, 0x0d04, NULL, 0);
-		reg_w(dev, 0, 0, 0x2000, NULL, 0);
-		reg_w(dev, 0, 0x13, 0x2301, NULL, 0);
-		reg_w(dev, 0, 0, 0x2306, NULL, 0);
+		reg_w(gspca_dev, 0x1d, 0, 0, 0);
+		reg_w(gspca_dev, 0, 1, 0x2306, 0);
+		reg_w(gspca_dev, 0, 0, 0x0d04, 0);
+		reg_w(gspca_dev, 0, 0, 0x2000, 0);
+		reg_w(gspca_dev, 0, 0x13, 0x2301, 0);
+		reg_w(gspca_dev, 0, 0, 0x2306, 0);
 		/* fall thru */
 	case BRIDGE_SPCA533:
 		rc = spca504B_PollingDataReady(gspca_dev);
@@ -873,12 +882,12 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		break;
 	case BRIDGE_SPCA536:
 		spca50x_GetFirmware(gspca_dev);
-		reg_r(dev, 0x00, 0x5002, gspca_dev->usb_buf, 1);
+		reg_r(gspca_dev, 0x00, 0x5002, 1);
 		gspca_dev->usb_buf[0] = 0;
-		reg_w(dev, 0x24, 0, 0, gspca_dev->usb_buf, 1);
-		reg_r(dev, 0x24, 0, gspca_dev->usb_buf, 1);
+		reg_w(gspca_dev, 0x24, 0, 0, 1);
+		reg_r(gspca_dev, 0x24, 0, 1);
 		rc = spca504B_PollingDataReady(gspca_dev);
-		reg_w(dev, 0x34, 0, 0, NULL, 0);
+		reg_w(gspca_dev, 0x34, 0, 0, 0);
 		spca504B_WaitCmdStatus(gspca_dev);
 		break;
 	case BRIDGE_SPCA504C:	/* pccam600 */
@@ -971,12 +980,12 @@ static void sd_start(struct gspca_dev *gspca_dev)
 /*	case BRIDGE_SPCA536: */
 		if (sd->subtype == MegapixV4 ||
 		    sd->subtype == LogitechClickSmart820) {
-			reg_w(dev, 0xf0, 0, 0, NULL, 0);
+			reg_w(gspca_dev, 0xf0, 0, 0, 0);
 			spca504B_WaitCmdStatus(gspca_dev);
-			reg_r(dev, 0xf0, 4, NULL, 0);
+			reg_r(gspca_dev, 0xf0, 4, 0);
 			spca504B_WaitCmdStatus(gspca_dev);
 		} else {
-			reg_w(dev, 0x31, 0, 4, NULL, 0);
+			reg_w(gspca_dev, 0x31, 0, 4, 0);
 			spca504B_WaitCmdStatus(gspca_dev);
 			rc = spca504B_PollingDataReady(gspca_dev);
 		}
@@ -1045,7 +1054,7 @@ static void sd_stopN(struct gspca_dev *gspca_dev)
 /*	case BRIDGE_SPCA533: */
 /*	case BRIDGE_SPCA536: */
 /*	case BRIDGE_SPCA504B: */
-		reg_w(dev, 0x31, 0, 0, NULL, 0);
+		reg_w(gspca_dev, 0x31, 0, 0, 0);
 		spca504B_WaitCmdStatus(gspca_dev);
 		spca504B_PollingDataReady(gspca_dev);
 		break;
diff --git a/drivers/media/video/gspca/t613.c b/drivers/media/video/gspca/t613.c
index 81b175e15ca..f034c748fc7 100644
--- a/drivers/media/video/gspca/t613.c
+++ b/drivers/media/video/gspca/t613.c
@@ -391,7 +391,7 @@ static void reg_w(struct gspca_dev *gspca_dev,
 				NULL, 0, 500);
 		return;
 	}
-	if (len <= sizeof gspca_dev->usb_buf) {
+	if (len <= USB_BUF_SZ) {
 		memcpy(gspca_dev->usb_buf, buffer, len);
 		usb_control_msg(gspca_dev->dev,
 				usb_sndctrlpipe(gspca_dev->dev, 0),
-- 
GitLab


From 271315a9b4363ed884024022f2cf799344548e8f Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:19 -0300
Subject: [PATCH 752/869] V4L/DVB (8830): gspca: Move some probe code to the
 new init function.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/pac7311.c | 15 +++++++++------
 drivers/media/video/gspca/sonixb.c  |  8 ++++----
 2 files changed, 13 insertions(+), 10 deletions(-)

diff --git a/drivers/media/video/gspca/pac7311.c b/drivers/media/video/gspca/pac7311.c
index 723219d4964..d4be5184328 100644
--- a/drivers/media/video/gspca/pac7311.c
+++ b/drivers/media/video/gspca/pac7311.c
@@ -245,7 +245,7 @@ static struct v4l2_pix_format vga_mode[] = {
 };
 
 /* pac 7302 */
-static const __u8 probe_7302[] = {
+static const __u8 init_7302[] = {
 /*	index,value */
 	0xff, 0x01,		/* page 1 */
 	0x78, 0x00,		/* deactivate */
@@ -341,7 +341,7 @@ static const __u8 page3_7302[] = {
 };
 
 /* pac 7311 */
-static const __u8 probe_7311[] = {
+static const __u8 init_7311[] = {
 	0x78, 0x40,	/* Bit_0=start stream, Bit_6=LED */
 	0x78, 0x40,	/* Bit_0=start stream, Bit_6=LED */
 	0x78, 0x44,	/* Bit_0=start stream, Bit_6=LED */
@@ -503,14 +503,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	sd->sensor = id->driver_info;
 	if (sd->sensor == SENSOR_PAC7302) {
 		PDEBUG(D_CONF, "Find Sensor PAC7302");
-		reg_w_seq(gspca_dev, probe_7302, sizeof probe_7302);
-
 		cam->cam_mode = &vga_mode[2];	/* only 640x480 */
 		cam->nmodes = 1;
 	} else {
 		PDEBUG(D_CONF, "Find Sensor PAC7311");
-		reg_w_seq(gspca_dev, probe_7311, sizeof probe_7311);
-
 		cam->cam_mode = vga_mode;
 		cam->nmodes = ARRAY_SIZE(vga_mode);
 		gspca_dev->ctrl_dis = (1 << BRIGHTNESS_IDX)
@@ -669,6 +665,13 @@ static void sethvflip(struct gspca_dev *gspca_dev)
 /* this function is called at probe and resume time */
 static int sd_init(struct gspca_dev *gspca_dev)
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	if (sd->sensor == SENSOR_PAC7302)
+		reg_w_seq(gspca_dev, init_7302, sizeof init_7302);
+	else
+		reg_w_seq(gspca_dev, init_7311, sizeof init_7311);
+
 	return 0;
 }
 
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 162beb3fead..60260803124 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -736,7 +736,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
 	int sif = 0;
-	const __u8 stop = 0x09; /* Disable stream turn of LED */
 
 	reg_r(gspca_dev, 0x00);
 	if (gspca_dev->usb_buf[0] != 0x10)
@@ -773,15 +772,16 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		sd->autogain = AUTOGAIN_DEF;
 	sd->freq = FREQ_DEF;
 
-	/* Disable stream turn of LED */
-	reg_w(gspca_dev, 0x01, &stop, 1);
-
 	return 0;
 }
 
 /* this function is called at probe and resume time */
 static int sd_init(struct gspca_dev *gspca_dev)
 {
+	const __u8 stop = 0x09; /* Disable stream turn of LED */
+
+	reg_w(gspca_dev, 0x01, &stop, 1);
+
 	return 0;
 }
 
-- 
GitLab


From 222a07ffd8e280b1bf4a6f7edab8b6fa27a5455a Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:20 -0300
Subject: [PATCH 753/869] V4L/DVB (8831): gspca: Resolve webcam conflicts
 between some drivers.

-remove USB-id's from zc0301 for cams for which zc0301.c does not support
  the sensor
-remove USB-id's from sn9c102 for cams where sn9c102 does not support the
  bridge sensor combination
-no longer make inclusion of usb id's removed from zc0301 and sn9c102
  conditional in gspca
-fix conditional inclusion of USB-id's in gspca to also work when the
  conflicting drivers are build as a module
-add a number of USB-id's to gspca from various windows .inf files:
0c45:608f from generic sonix sn9c103 inf file (+ ov7630 which we support)
041e:4022 from creative webcam nx pro, same as already supported 041e:401e
0ac8:0301 from generic zc0301 driver which supports many sensors
10fd:804d from typhoon webshot driver (also FlyCAM-USB 300 plus)

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/etoms.c             |  2 +-
 drivers/media/video/gspca/sonixb.c            |  8 ++++++--
 drivers/media/video/gspca/sonixj.c            |  6 ++++--
 drivers/media/video/gspca/zc3xx.c             | 17 +++++------------
 .../media/video/sn9c102/sn9c102_devtable.h    | 13 +++++++------
 drivers/media/video/zc0301/zc0301_sensor.h    | 19 -------------------
 6 files changed, 23 insertions(+), 42 deletions(-)

diff --git a/drivers/media/video/gspca/etoms.c b/drivers/media/video/gspca/etoms.c
index 9eb6adb24bd..4ff0e386914 100644
--- a/drivers/media/video/gspca/etoms.c
+++ b/drivers/media/video/gspca/etoms.c
@@ -897,7 +897,7 @@ static struct sd_desc sd_desc = {
 /* -- module initialisation -- */
 static __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x102c, 0x6151), .driver_info = SENSOR_PAS106},
-#ifndef CONFIG_USB_ET61X251
+#if !defined CONFIG_USB_ET61X251 && !defined CONFIG_USB_ET61X251_MODULE
 	{USB_DEVICE(0x102c, 0x6251), .driver_info = SENSOR_TAS5130CXX},
 #endif
 	{}
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 60260803124..f30e6ec9137 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -1153,7 +1153,7 @@ static const struct sd_desc sd_desc = {
 #define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
 
 static __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_SN9C102
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x6001),			/* SN9C102 */
 			SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x6005),			/* SN9C101 */
@@ -1167,7 +1167,7 @@ static __devinitdata struct usb_device_id device_table[] = {
 #endif
 	{USB_DEVICE(0x0c45, 0x6011),		/* SN9C101 - SN9C101G */
 			SFCI(OV6650, F_GAIN|F_SIF, 0, 0x60)},
-#ifndef CONFIG_USB_SN9C102
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x6019),			/* SN9C101 */
 			SFCI(OV7630, F_GAIN, 0, 0x21)},
 	{USB_DEVICE(0x0c45, 0x6024),			/* SN9C102 */
@@ -1180,10 +1180,14 @@ static __devinitdata struct usb_device_id device_table[] = {
 			SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x602c),			/* SN9C102 */
 			SFCI(OV7630, F_GAIN, 0, 0x21)},
+#endif
 	{USB_DEVICE(0x0c45, 0x602d),			/* SN9C102 */
 			SFCI(HV7131R, 0, NO_EXPO|NO_FREQ, 0)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x602e),			/* SN9C102 */
 			SFCI(OV7630, F_GAIN, 0, 0x21)},
+	{USB_DEVICE(0x0c45, 0x608f),			/* SN9C103 */
+			SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
 	{USB_DEVICE(0x0c45, 0x60af),			/* SN9C103 */
 			SFCI(PAS202, F_H18, NO_EXPO|NO_FREQ, 0)},
 	{USB_DEVICE(0x0c45, 0x60b0),			/* SN9C103 */
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 5697959e724..d75b1d20b31 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1556,7 +1556,7 @@ static const struct sd_desc sd_desc = {
 			| (SENSOR_ ## sensor << 8) \
 			| (i2c_addr)
 static const __devinitdata struct usb_device_id device_table[] = {
-#ifndef CONFIG_USB_SN9C102
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0458, 0x7025), BSI(SN9C120, MI0360, 0x5d)},
 	{USB_DEVICE(0x045e, 0x00f5), BSI(SN9C105, OV7660, 0x21)},
 	{USB_DEVICE(0x045e, 0x00f7), BSI(SN9C105, OV7660, 0x21)},
@@ -1589,9 +1589,11 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0c45, 0x612c), BSI(SN9C110, MO4000, 0x21)},
 	{USB_DEVICE(0x0c45, 0x612e), BSI(SN9C110, OV7630, 0x21)},
 /*	{USB_DEVICE(0x0c45, 0x612f), BSI(SN9C110, ICM105C, 0x??)}, */
-#ifndef CONFIG_USB_SN9C102
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x6130), BSI(SN9C120, MI0360, 0x5d)},
+#endif
 	{USB_DEVICE(0x0c45, 0x6138), BSI(SN9C120, MO4000, 0x21)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 /*	{USB_DEVICE(0x0c45, 0x613a), BSI(SN9C120, OV7648, 0x??)}, */
 	{USB_DEVICE(0x0c45, 0x613b), BSI(SN9C120, OV7660, 0x21)},
 	{USB_DEVICE(0x0c45, 0x613c), BSI(SN9C120, HV7131R, 0x11)},
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index f4239b442c1..8d7c27e6ac7 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7508,26 +7508,21 @@ static const struct sd_desc sd_desc = {
 
 static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x041e, 0x041e)},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x041e, 0x4017)},
 	{USB_DEVICE(0x041e, 0x401c), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x401e)},
 	{USB_DEVICE(0x041e, 0x401f)},
-#endif
+	{USB_DEVICE(0x041e, 0x4022)},
 	{USB_DEVICE(0x041e, 0x4029)},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x041e, 0x4034), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x4035), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x041e, 0x4036)},
 	{USB_DEVICE(0x041e, 0x403a)},
-#endif
 	{USB_DEVICE(0x041e, 0x4051), .driver_info = SENSOR_TAS5130C_VF0250},
 	{USB_DEVICE(0x041e, 0x4053), .driver_info = SENSOR_TAS5130C_VF0250},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x0458, 0x7007)},
 	{USB_DEVICE(0x0458, 0x700c)},
 	{USB_DEVICE(0x0458, 0x700f)},
-#endif
 	{USB_DEVICE(0x0461, 0x0a00)},
 	{USB_DEVICE(0x046d, 0x08a0)},
 	{USB_DEVICE(0x046d, 0x08a1)},
@@ -7539,7 +7534,7 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x046d, 0x08aa)},
 	{USB_DEVICE(0x046d, 0x08ac)},
 	{USB_DEVICE(0x046d, 0x08ad)},
-#ifndef CONFIG_USB_ZC0301
+#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE
 	{USB_DEVICE(0x046d, 0x08ae)},
 #endif
 	{USB_DEVICE(0x046d, 0x08af)},
@@ -7554,22 +7549,20 @@ static const __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0471, 0x032d), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x0471, 0x032e), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x055f, 0xc005)},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x055f, 0xd003)},
 	{USB_DEVICE(0x055f, 0xd004)},
-#endif
 	{USB_DEVICE(0x0698, 0x2003)},
+	{USB_DEVICE(0x0ac8, 0x0301), .driver_info = SENSOR_PAS106},
 	{USB_DEVICE(0x0ac8, 0x0302)},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x0ac8, 0x301b)},
+#if !defined CONFIG_USB_ZC0301 && !defined CONFIG_USB_ZC0301_MODULE
 	{USB_DEVICE(0x0ac8, 0x303b)},
 #endif
 	{USB_DEVICE(0x0ac8, 0x305b), .driver_info = SENSOR_TAS5130C_VF0250},
-#ifndef CONFIG_USB_ZC0301
 	{USB_DEVICE(0x0ac8, 0x307b)},
 	{USB_DEVICE(0x10fd, 0x0128)},
+	{USB_DEVICE(0x10fd, 0x804d)},
 	{USB_DEVICE(0x10fd, 0x8050)},
-#endif
 	{}			/* end of entry */
 };
 #undef DVNAME
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index 6ff489baacf..85499a3e4ab 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -45,6 +45,7 @@ static const struct usb_device_id sn9c102_id_table[] = {
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x6011, BRIDGE_SN9C102), }, OV6650 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6019, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6024, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6025, BRIDGE_SN9C102), },
@@ -53,24 +54,24 @@ static const struct usb_device_id sn9c102_id_table[] = {
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602a, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602b, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602c, BRIDGE_SN9C102), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x602d, BRIDGE_SN9C102), }, HV7131R */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x602e, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6030, BRIDGE_SN9C102), },
 	/* SN9C103 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6080, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6082, BRIDGE_SN9C103), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x6083, BRIDGE_SN9C103), }, HY7131D/E */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6088, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608a, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), },
@@ -105,7 +106,7 @@ static const struct usb_device_id sn9c102_id_table[] = {
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), },
-	{ SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), }, MO8000 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x613c, BRIDGE_SN9C120), },
diff --git a/drivers/media/video/zc0301/zc0301_sensor.h b/drivers/media/video/zc0301/zc0301_sensor.h
index 70fe6fc6cdd..b0cd49c438a 100644
--- a/drivers/media/video/zc0301/zc0301_sensor.h
+++ b/drivers/media/video/zc0301/zc0301_sensor.h
@@ -60,27 +60,8 @@ zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor);
 
 #define ZC0301_ID_TABLE                                                       \
 static const struct usb_device_id zc0301_id_table[] =  {                      \
-	{ ZC0301_USB_DEVICE(0x041e, 0x4017, 0xff), }, /* ICM105 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x401c, 0xff), }, /* PAS106 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x401e, 0xff), }, /* HV7131 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x401f, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x041e, 0x4022, 0xff), },                         \
-	{ ZC0301_USB_DEVICE(0x041e, 0x4034, 0xff), }, /* PAS106 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x4035, 0xff), }, /* PAS106 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x4036, 0xff), }, /* HV7131 */            \
-	{ ZC0301_USB_DEVICE(0x041e, 0x403a, 0xff), }, /* HV7131 */            \
-	{ ZC0301_USB_DEVICE(0x0458, 0x7007, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x0458, 0x700c, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x0458, 0x700f, 0xff), }, /* TAS5130 */           \
 	{ ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */            \
-	{ ZC0301_USB_DEVICE(0x055f, 0xd003, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x055f, 0xd004, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x0ac8, 0x0301, 0xff), },                         \
-	{ ZC0301_USB_DEVICE(0x0ac8, 0x301b, 0xff), }, /* PB-0330/HV7131 */    \
 	{ ZC0301_USB_DEVICE(0x0ac8, 0x303b, 0xff), }, /* PB-0330 */           \
-	{ ZC0301_USB_DEVICE(0x10fd, 0x0128, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x10fd, 0x8050, 0xff), }, /* TAS5130 */           \
-	{ ZC0301_USB_DEVICE(0x10fd, 0x804e, 0xff), }, /* TAS5130 */           \
 	{ }                                                                   \
 };
 
-- 
GitLab


From 20122542df420a31532c8e2b5d4107e9846bac6b Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Wed, 3 Sep 2008 17:12:20 -0300
Subject: [PATCH 754/869] V4L/DVB (8832): gspca: Bad pixelformat of vc0321
 webcams.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/vc032x.c | 4 ++--
 include/linux/videodev2.h          | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/gspca/vc032x.c b/drivers/media/video/gspca/vc032x.c
index f8c3ff30e46..bd4c226c9a0 100644
--- a/drivers/media/video/gspca/vc032x.c
+++ b/drivers/media/video/gspca/vc032x.c
@@ -88,12 +88,12 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format vc0321_mode[] = {
-	{320, 240, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE,
+	{320, 240, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
 		.bytesperline = 320,
 		.sizeimage = 320 * 240 * 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
-	{640, 480, V4L2_PIX_FMT_YUV420, V4L2_FIELD_NONE,
+	{640, 480, V4L2_PIX_FMT_YVYU, V4L2_FIELD_NONE,
 		.bytesperline = 640,
 		.sizeimage = 640 * 480 * 2,
 		.colorspace = V4L2_COLORSPACE_SRGB,
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 6c73516b74c..303d93ffd6b 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -335,6 +335,7 @@ struct v4l2_pix_format {
 #define V4L2_PIX_FMT_SPCA561  v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */
 #define V4L2_PIX_FMT_PAC207   v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */
 #define V4L2_PIX_FMT_PJPG     v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */
+#define V4L2_PIX_FMT_YVYU    v4l2_fourcc('Y', 'V', 'Y', 'U') /* 16  YVU 4:2:2     */
 
 /*
  *	F O R M A T   E N U M E R A T I O N
-- 
GitLab


From f45f06b648bad82430c64a2e1ad67dc616eb54c6 Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:21 -0300
Subject: [PATCH 755/869] V4L/DVB (8833): gspca: Cleanup the sonixb code.

-the usb-id table caried several flags which were not usb-id specific but
 sensor specific, add a sensor_data array and move these flag there
-fr_h_sz was being abused to store and check which bridge was being used
 instead add a bridge member to the sd struct
-now that we have a sensor_data table use that to store pointers to
 init_sequences instead of using switch cases on sd->sensor

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c | 365 +++++++++++++----------------
 1 file changed, 162 insertions(+), 203 deletions(-)

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index f30e6ec9137..8eaeaa3a96d 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -41,8 +41,12 @@ struct sd {
 	unsigned char frames_to_drop;
 	unsigned char freq;		/* light freq filter setting */
 
-	unsigned char fr_h_sz;		/* size of frame header */
-	char sensor;			/* Type of image sensor chip */
+	__u8 bridge;			/* Type of bridge */
+#define BRIDGE_101 0
+#define BRIDGE_102 0 /* We make no difference between 101 and 102 */
+#define BRIDGE_103 1
+
+	__u8 sensor;			/* Type of image sensor chip */
 #define SENSOR_HV7131R 0
 #define SENSOR_OV6650 1
 #define SENSOR_OV7630 2
@@ -50,15 +54,31 @@ struct sd {
 #define SENSOR_PAS202 4
 #define SENSOR_TAS5110 5
 #define SENSOR_TAS5130CXX 6
-	char sensor_has_gain;
-	__u8 sensor_addr;
 	__u8 reg11;
 };
 
-/* flags used in the device id table */
+typedef const __u8 sensor_init_t[8];
+
+struct sensor_data {
+	const __u8 *bridge_init[2];
+	int bridge_init_size[2];
+	sensor_init_t *sensor_init;
+	int sensor_init_size;
+	sensor_init_t *sensor_bridge_init[2];
+	int sensor_bridge_init_size[2];
+	int flags;
+	unsigned ctrl_dis;
+	__u8 sensor_addr;
+};
+
+/* sensor_data flags */
 #define F_GAIN 0x01		/* has gain */
 #define F_SIF  0x02		/* sif or vga */
-#define F_H18  0x04		/* long (18 b) or short (12 b) frame header */
+
+/* ctrl_dis helper macros */
+#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
+#define NO_FREQ (1 << FREQ_IDX)
+#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
 
 #define COMP2 0x8f
 #define COMP 0xc7		/* 0x87 //0x07 */
@@ -69,6 +89,18 @@ struct sd {
 
 #define SYS_CLK 0x04
 
+#define SENS(bridge_1, bridge_3, sensor, sensor_1, \
+	sensor_3, _flags, _ctrl_dis, _sensor_addr) \
+{ \
+	.bridge_init = { bridge_1, bridge_3 }, \
+	.bridge_init_size = { sizeof(bridge_1), sizeof(bridge_3) }, \
+	.sensor_init = sensor, \
+	.sensor_init_size = sizeof(sensor), \
+	.sensor_bridge_init = { sensor_1, sensor_3,}, \
+	.sensor_bridge_init_size = { sizeof(sensor_1), sizeof(sensor_3)}, \
+	.flags = _flags, .ctrl_dis = _ctrl_dis, .sensor_addr = _sensor_addr \
+}
+
 /* We calculate the autogain at the end of the transfer of a frame, at this
    moment a frame with the old settings is being transmitted, and a frame is
    being captured with the old settings. So if we adjust the autogain we must
@@ -219,7 +251,7 @@ static const __u8 hv7131_sensor_init[][8] = {
 static const __u8 initOv6650[] = {
 	0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
 	0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x0b,
+	0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b,
 	0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00
 };
 static const __u8 ov6650_sensor_init[][8] =
@@ -260,7 +292,7 @@ static const __u8 initOv7630[] = {
 	0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,	/* r09 .. r10 */
 	0x00, 0x02, 0x01, 0x0a,				/* r11 .. r14 */
 	0x28, 0x1e,			/* H & V sizes     r15 .. r16 */
-	0x68, COMP1, MCK_INIT1,				/* r17 .. r19 */
+	0x68, COMP2, MCK_INIT1,				/* r17 .. r19 */
 	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c		/* r1a .. r1f */
 };
 static const __u8 initOv7630_3[] = {
@@ -295,47 +327,65 @@ static const __u8 ov7630_sensor_init[][8] = {
 	{0xd0, 0x21, 0x17, 0x1c, 0xbd, 0x06, 0xf6, 0x10},
 };
 
+static const __u8 ov7630_sensor_init_3[][8] = {
+	{0xa0, 0x21, 0x13, 0x80, 0x00,	0x00, 0x00, 0x10},
+};
+
 static const __u8 initPas106[] = {
 	0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
 	0x00, 0x00,
 	0x00, 0x00, 0x00, 0x05, 0x01, 0x00,
-	0x16, 0x12, 0x28, COMP1, MCK_INIT1,
+	0x16, 0x12, 0x24, COMP1, MCK_INIT1,
 	0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
 };
 /* compression 0x86 mckinit1 0x2b */
-static const __u8 pas106_data[][2] = {
-	{0x02, 0x04},		/* Pixel Clock Divider 6 */
-	{0x03, 0x13},		/* Frame Time MSB */
-/*	{0x03, 0x12},		 * Frame Time MSB */
-	{0x04, 0x06},		/* Frame Time LSB */
-/*	{0x04, 0x05},		 * Frame Time LSB */
-	{0x05, 0x65},		/* Shutter Time Line Offset */
-/*	{0x05, 0x6d},		 * Shutter Time Line Offset */
-/*	{0x06, 0xb1},		 * Shutter Time Pixel Offset */
-	{0x06, 0xcd},		/* Shutter Time Pixel Offset */
-	{0x07, 0xc1},		/* Black Level Subtract Sign */
-/*	{0x07, 0x00},		 * Black Level Subtract Sign */
-	{0x08, 0x06},		/* Black Level Subtract Level */
-	{0x08, 0x06},		/* Black Level Subtract Level */
-/*	{0x08, 0x01},		 * Black Level Subtract Level */
-	{0x09, 0x05},		/* Color Gain B Pixel 5 a */
-	{0x0a, 0x04},		/* Color Gain G1 Pixel 1 5 */
-	{0x0b, 0x04},		/* Color Gain G2 Pixel 1 0 5 */
-	{0x0c, 0x05},		/* Color Gain R Pixel 3 1 */
-	{0x0d, 0x00},		/* Color GainH  Pixel */
-	{0x0e, 0x0e},		/* Global Gain */
-	{0x0f, 0x00},		/* Contrast */
-	{0x10, 0x06},		/* H&V synchro polarity */
-	{0x11, 0x06},		/* ?default */
-	{0x12, 0x06},		/* DAC scale */
-	{0x14, 0x02},		/* ?default */
-	{0x13, 0x01},		/* Validate Settings */
+static const __u8 pas106_sensor_init[][8] = {
+	/* Pixel Clock Divider 6 */
+	{ 0xa1, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x14 },
+	/* Frame Time MSB (also seen as 0x12) */
+	{ 0xa1, 0x40, 0x03, 0x13, 0x00, 0x00, 0x00, 0x14 },
+	/* Frame Time LSB (also seen as 0x05) */
+	{ 0xa1, 0x40, 0x04, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	/* Shutter Time Line Offset (also seen as 0x6d) */
+	{ 0xa1, 0x40, 0x05, 0x65, 0x00, 0x00, 0x00, 0x14 },
+	/* Shutter Time Pixel Offset (also seen as 0xb1) */
+	{ 0xa1, 0x40, 0x06, 0xcd, 0x00, 0x00, 0x00, 0x14 },
+	/* Black Level Subtract Sign (also seen 0x00) */
+	{ 0xa1, 0x40, 0x07, 0xc1, 0x00, 0x00, 0x00, 0x14 },
+	/* Black Level Subtract Level (also seen 0x01) */
+	{ 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	{ 0xa1, 0x40, 0x08, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	/* Color Gain B Pixel 5 a */
+	{ 0xa1, 0x40, 0x09, 0x05, 0x00, 0x00, 0x00, 0x14 },
+	/* Color Gain G1 Pixel 1 5 */
+	{ 0xa1, 0x40, 0x0a, 0x04, 0x00, 0x00, 0x00, 0x14 },
+	/* Color Gain G2 Pixel 1 0 5 */
+	{ 0xa1, 0x40, 0x0b, 0x04, 0x00, 0x00, 0x00, 0x14 },
+	/* Color Gain R Pixel 3 1 */
+	{ 0xa1, 0x40, 0x0c, 0x05, 0x00, 0x00, 0x00, 0x14 },
+	/* Color GainH  Pixel */
+	{ 0xa1, 0x40, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x14 },
+	/* Global Gain */
+	{ 0xa1, 0x40, 0x0e, 0x0e, 0x00, 0x00, 0x00, 0x14 },
+	/* Contrast */
+	{ 0xa1, 0x40, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x14 },
+	/* H&V synchro polarity */
+	{ 0xa1, 0x40, 0x10, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	/* ?default */
+	{ 0xa1, 0x40, 0x11, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	/* DAC scale */
+	{ 0xa1, 0x40, 0x12, 0x06, 0x00, 0x00, 0x00, 0x14 },
+	/* ?default */
+	{ 0xa1, 0x40, 0x14, 0x02, 0x00, 0x00, 0x00, 0x14 },
+	/* Validate Settings */
+	{ 0xa1, 0x40, 0x13, 0x01, 0x00, 0x00, 0x00, 0x14 },
 };
+
 static const __u8 initPas202[] = {
 	0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
 	0x00, 0x00,
 	0x00, 0x00, 0x00, 0x07, 0x03, 0x0a,	/* 6 */
-	0x28, 0x1e, 0x28, 0x89, 0x30,
+	0x28, 0x1e, 0x28, 0x89, 0x20,
 	0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
 };
 static const __u8 pas202_sensor_init[][8] = {
@@ -390,6 +440,21 @@ static const __u8 tas5130_sensor_init[][8] = {
 	{0x30, 0x11, 0x02, 0x20, 0x70, 0x00, 0x00, 0x10},
 };
 
+struct sensor_data sensor_data[] = {
+SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
+SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
+SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
+	F_GAIN, 0, 0x21),
+SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
+	0),
+SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
+	NO_EXPO|NO_FREQ, 0),
+SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
+	NO_BRIGHTNESS|NO_FREQ, 0),
+SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
+	0),
+};
+
 /* get one byte in gspca_dev->usb_buf */
 static void reg_r(struct gspca_dev *gspca_dev,
 		  __u16 value)
@@ -468,7 +533,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
 			{0xa0, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x10};
 
 		/* change reg 0x06 */
-		i2cOV[1] = sd->sensor_addr;
+		i2cOV[1] = sensor_data[sd->sensor].sensor_addr;
 		i2cOV[3] = sd->brightness;
 		if (i2c_w(gspca_dev, i2cOV) < 0)
 			goto err;
@@ -555,7 +620,7 @@ static void setsensorgain(struct gspca_dev *gspca_dev)
 	case SENSOR_OV7630: {
 		__u8 i2c[] = {0xa0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10};
 
-		i2c[1] = sd->sensor_addr;
+		i2c[1] = sensor_data[sd->sensor].sensor_addr;
 		i2c[3] = gain >> 2;
 		if (i2c_w(gspca_dev, i2c) < 0)
 			goto err;
@@ -582,7 +647,7 @@ static void setgain(struct gspca_dev *gspca_dev)
 	rgb_value = gain;
 	reg_w(gspca_dev, 0x11, &rgb_value, 1);
 
-	if (sd->sensor_has_gain)
+	if (sensor_data[sd->sensor].flags & F_GAIN)
 		setsensorgain(gspca_dev);
 }
 
@@ -662,7 +727,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
 			reg10 = reg10_max;
 
 		/* Write reg 10 and reg11 low nibble */
-		i2c[1] = sd->sensor_addr;
+		i2c[1] = sensor_data[sd->sensor].sensor_addr;
 		i2c[3] = reg10;
 		i2c[4] |= reg11 - 1;
 
@@ -702,7 +767,7 @@ static void setfreq(struct gspca_dev *gspca_dev)
 					? 0x4f : 0x8a;
 			break;
 		}
-		i2c[1] = sd->sensor_addr;
+		i2c[1] = sensor_data[sd->sensor].sensor_addr;
 		if (i2c_w(gspca_dev, i2c) < 0)
 			PDEBUG(D_ERR, "i2c error setfreq");
 		break;
@@ -735,28 +800,19 @@ static int sd_config(struct gspca_dev *gspca_dev,
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	struct cam *cam;
-	int sif = 0;
 
 	reg_r(gspca_dev, 0x00);
 	if (gspca_dev->usb_buf[0] != 0x10)
 		return -ENODEV;
 
 	/* copy the webcam info from the device id */
-	sd->sensor = (id->driver_info >> 24) & 0xff;
-	if (id->driver_info & (F_GAIN << 16))
-		sd->sensor_has_gain = 1;
-	if (id->driver_info & (F_SIF << 16))
-		sif = 1;
-	if (id->driver_info & (F_H18 << 16))
-		sd->fr_h_sz = 18;		/* size of frame header */
-	else
-		sd->fr_h_sz = 12;
-	gspca_dev->ctrl_dis = (id->driver_info >> 8) & 0xff;
-	sd->sensor_addr = id->driver_info & 0xff;
+	sd->sensor = id->driver_info >> 8;
+	sd->bridge = id->driver_info & 0xff;
+	gspca_dev->ctrl_dis = sensor_data[sd->sensor].ctrl_dis;
 
 	cam = &gspca_dev->cam;
 	cam->epaddr = 0x01;
-	if (!sif) {
+	if (!(sensor_data[sd->sensor].flags & F_SIF)) {
 		cam->cam_mode = vga_mode;
 		cam->nmodes = ARRAY_SIZE(vga_mode);
 	} else {
@@ -785,78 +841,29 @@ static int sd_init(struct gspca_dev *gspca_dev)
 	return 0;
 }
 
-static void pas106_i2cinit(struct gspca_dev *gspca_dev)
-{
-	int i;
-	const __u8 *data;
-	__u8 i2c1[] = { 0xa1, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x14 };
-
-	i = ARRAY_SIZE(pas106_data);
-	data = pas106_data[0];
-	while (--i >= 0) {
-		memcpy(&i2c1[2], data, 2);
-					/* copy 2 bytes from the template */
-		if (i2c_w(gspca_dev, i2c1) < 0)
-			PDEBUG(D_ERR, "i2c error pas106");
-		data += 2;
-	}
-}
-
 /* -- start the camera -- */
 static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
-	int mode, l = 0x1f;
+	int mode, l;
 	const __u8 *sn9c10x;
 	__u8 reg17_19[3];
 
-	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 0x07;
+	sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge];
+	l = sensor_data[sd->sensor].bridge_init_size[sd->bridge];
+	reg17_19[0] = sn9c10x[0x17 - 1];
+	reg17_19[1] = sn9c10x[0x18 - 1] | (mode << 4);
+	reg17_19[2] = sn9c10x[0x19 - 1];
+	/* Special cases where reg 17 and or 19 value depends on mode */
 	switch (sd->sensor) {
-	case SENSOR_HV7131R:
-		sn9c10x = initHv7131;
-		reg17_19[0] = 0x60;
-		reg17_19[1] = (mode << 4) | 0x8a;
-		reg17_19[2] = 0x20;
-		break;
-	case SENSOR_OV6650:
-		sn9c10x = initOv6650;
-		reg17_19[0] = 0x68;
-		reg17_19[1] = (mode << 4) | 0x8b;
-		reg17_19[2] = 0x20;
-		break;
-	case SENSOR_OV7630:
-		if (sd->fr_h_sz == 18) { /* SN9C103 */
-			sn9c10x = initOv7630_3;
-			l = sizeof initOv7630_3;
-		} else
-			sn9c10x = initOv7630;
-		reg17_19[0] = 0x68;
-		reg17_19[1] = (mode << 4) | COMP2;
-		reg17_19[2] = MCK_INIT1;
-		break;
-	case SENSOR_PAS106:
-		sn9c10x = initPas106;
-		reg17_19[0] = 0x24;		/* 0x28 */
-		reg17_19[1] = (mode << 4) | COMP1;
-		reg17_19[2] = MCK_INIT1;
-		break;
 	case SENSOR_PAS202:
-		sn9c10x = initPas202;
 		reg17_19[0] = mode ? 0x24 : 0x20;
-		reg17_19[1] = (mode << 4) | 0x89;
-		reg17_19[2] = 0x20;
 		break;
-	case SENSOR_TAS5110:
-		sn9c10x = initTas5110;
-		reg17_19[0] = 0x60;
-		reg17_19[1] = (mode << 4) | 0x86;
-		reg17_19[2] = 0x2b;		/* 0xf3; */
-		break;
-	default:
-/*	case SENSOR_TAS5130CXX: */
-		sn9c10x = initTas5130;
-		reg17_19[0] = 0x60;
-		reg17_19[1] = (mode << 4) | COMP;
+	case SENSOR_TAS5130CXX:
+		/* probably not mode specific at all most likely the upper
+		   nibble of 0x19 is exposure (clock divider) just as with
+		   the tas5110, we need someone to test this. */
 		reg17_19[2] = mode ? 0x23 : 0x43;
 		break;
 	}
@@ -867,41 +874,16 @@ static void sd_start(struct gspca_dev *gspca_dev)
 	reg_w(gspca_dev, 0x17, &sn9c10x[0x17 - 1], 1);
 	/* Set the registers from the template */
 	reg_w(gspca_dev, 0x01, sn9c10x, l);
-	switch (sd->sensor) {
-	case SENSOR_HV7131R:
-		i2c_w_vector(gspca_dev, hv7131_sensor_init,
-				sizeof hv7131_sensor_init);
-		break;
-	case SENSOR_OV6650:
-		i2c_w_vector(gspca_dev, ov6650_sensor_init,
-				sizeof ov6650_sensor_init);
-		break;
-	case SENSOR_OV7630:
-		i2c_w_vector(gspca_dev, ov7630_sensor_init,
-				sizeof ov7630_sensor_init);
-		if (sd->fr_h_sz == 18) { /* SN9C103 */
-			const __u8 i2c[] = { 0xa0, 0x21, 0x13, 0x80, 0x00,
-						0x00, 0x00, 0x10 };
-			i2c_w(gspca_dev, i2c);
-		}
-		break;
-	case SENSOR_PAS106:
-		pas106_i2cinit(gspca_dev);
-		break;
-	case SENSOR_PAS202:
-		i2c_w_vector(gspca_dev, pas202_sensor_init,
-				sizeof pas202_sensor_init);
-		break;
-	case SENSOR_TAS5110:
-		i2c_w_vector(gspca_dev, tas5110_sensor_init,
-				sizeof tas5110_sensor_init);
-		break;
-	default:
-/*	case SENSOR_TAS5130CXX: */
-		i2c_w_vector(gspca_dev, tas5130_sensor_init,
-				sizeof tas5130_sensor_init);
-		break;
-	}
+
+	/* Init the sensor */
+	i2c_w_vector(gspca_dev, sensor_data[sd->sensor].sensor_init,
+			sensor_data[sd->sensor].sensor_init_size);
+	if (sensor_data[sd->sensor].sensor_bridge_init[sd->bridge])
+		i2c_w_vector(gspca_dev,
+			sensor_data[sd->sensor].sensor_bridge_init[sd->bridge],
+			sensor_data[sd->sensor].sensor_bridge_init_size[
+				sd->bridge]);
+
 	/* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
 	reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2);
 	/* compression register */
@@ -937,10 +919,7 @@ static void sd_start(struct gspca_dev *gspca_dev)
 
 static void sd_stopN(struct gspca_dev *gspca_dev)
 {
-	__u8 ByteSend;
-
-	ByteSend = 0x09;	/* 0X00 */
-	reg_w(gspca_dev, 0x01, &ByteSend, 1);
+	sd_init(gspca_dev);
 }
 
 static void sd_pkt_scan(struct gspca_dev *gspca_dev,
@@ -970,15 +949,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			    && data[5 + i] == 0x96) {	/* start of frame */
 				int lum = -1;
 				int pkt_type = LAST_PACKET;
+				int fr_h_sz = (sd->bridge == BRIDGE_103) ?
+					18 : 12;
 
-				if (len - i < sd->fr_h_sz) {
+				if (len - i < fr_h_sz) {
 					PDEBUG(D_STREAM, "packet too short to"
 						" get avg brightness");
-				} else if (sd->fr_h_sz == 12) {
-					lum = data[i + 8] + (data[i + 9] << 8);
-				} else {
+				} else if (sd->bridge == BRIDGE_103) {
 					lum = data[i + 9] +
 						(data[i + 10] << 8);
+				} else {
+					lum = data[i + 8] + (data[i + 9] << 8);
 				}
 				if (lum == 0) {
 					lum = -1;
@@ -993,8 +974,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 
 				frame = gspca_frame_add(gspca_dev, pkt_type,
 							frame, data, 0);
-				data += i + sd->fr_h_sz;
-				len -= i + sd->fr_h_sz;
+				data += i + fr_h_sz;
+				len -= i + fr_h_sz;
 				gspca_frame_add(gspca_dev, FIRST_PACKET,
 						frame, data, len);
 				return;
@@ -1143,55 +1124,33 @@ static const struct sd_desc sd_desc = {
 };
 
 /* -- module initialisation -- */
-#define SFCI(sensor, flags, disable_ctrls, i2c_addr) \
-	.driver_info = (SENSOR_ ## sensor << 24) \
-			| ((flags) << 16) \
-			| ((disable_ctrls) << 8) \
-			| (i2c_addr)
-#define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
-#define NO_FREQ (1 << FREQ_IDX)
-#define NO_BRIGHTNESS (1 << BRIGHTNESS_IDX)
+#define SB(sensor, bridge) \
+	.driver_info = (SENSOR_ ## sensor << 8) | BRIDGE_ ## bridge
+
 
 static __devinitdata struct usb_device_id device_table[] = {
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-	{USB_DEVICE(0x0c45, 0x6001),			/* SN9C102 */
-			SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
-	{USB_DEVICE(0x0c45, 0x6005),			/* SN9C101 */
-			SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
-	{USB_DEVICE(0x0c45, 0x6007),			/* SN9C101 */
-			SFCI(TAS5110, F_GAIN|F_SIF, NO_BRIGHTNESS|NO_FREQ, 0)},
-	{USB_DEVICE(0x0c45, 0x6009),			/* SN9C101 */
-			SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
-	{USB_DEVICE(0x0c45, 0x600d),			/* SN9C101 */
-			SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
+	{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)},
+	{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)},
+	{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)},
+	{USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
+	{USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
 #endif
-	{USB_DEVICE(0x0c45, 0x6011),		/* SN9C101 - SN9C101G */
-			SFCI(OV6650, F_GAIN|F_SIF, 0, 0x60)},
+	{USB_DEVICE(0x0c45, 0x6011), SB(OV6650, 101)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-	{USB_DEVICE(0x0c45, 0x6019),			/* SN9C101 */
-			SFCI(OV7630, F_GAIN, 0, 0x21)},
-	{USB_DEVICE(0x0c45, 0x6024),			/* SN9C102 */
-			SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
-	{USB_DEVICE(0x0c45, 0x6025),			/* SN9C102 */
-			SFCI(TAS5130CXX, 0, NO_EXPO|NO_FREQ, 0)},
-	{USB_DEVICE(0x0c45, 0x6028),			/* SN9C102 */
-			SFCI(PAS202, 0, NO_EXPO|NO_FREQ, 0)},
-	{USB_DEVICE(0x0c45, 0x6029),			/* SN9C101 */
-			SFCI(PAS106, F_SIF, NO_EXPO|NO_FREQ, 0)},
-	{USB_DEVICE(0x0c45, 0x602c),			/* SN9C102 */
-			SFCI(OV7630, F_GAIN, 0, 0x21)},
+	{USB_DEVICE(0x0c45, 0x6019), SB(OV7630, 101)},
+	{USB_DEVICE(0x0c45, 0x6024), SB(TAS5130CXX, 102)},
+	{USB_DEVICE(0x0c45, 0x6025), SB(TAS5130CXX, 102)},
+	{USB_DEVICE(0x0c45, 0x6028), SB(PAS202, 102)},
+	{USB_DEVICE(0x0c45, 0x6029), SB(PAS106, 102)},
+	{USB_DEVICE(0x0c45, 0x602c), SB(OV7630, 102)},
 #endif
-	{USB_DEVICE(0x0c45, 0x602d),			/* SN9C102 */
-			SFCI(HV7131R, 0, NO_EXPO|NO_FREQ, 0)},
+	{USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-	{USB_DEVICE(0x0c45, 0x602e),			/* SN9C102 */
-			SFCI(OV7630, F_GAIN, 0, 0x21)},
-	{USB_DEVICE(0x0c45, 0x608f),			/* SN9C103 */
-			SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
-	{USB_DEVICE(0x0c45, 0x60af),			/* SN9C103 */
-			SFCI(PAS202, F_H18, NO_EXPO|NO_FREQ, 0)},
-	{USB_DEVICE(0x0c45, 0x60b0),			/* SN9C103 */
-			SFCI(OV7630, F_GAIN|F_H18, 0, 0x21)},
+	{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
+	{USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
+	{USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
+	{USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)},
 #endif
 	{}
 };
-- 
GitLab


From 5c51518da2cabc08af535cf041c6a3697f9e931f Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:22 -0300
Subject: [PATCH 756/869] V4L/DVB (8834): gspca: Have a bigger buffer for
 sn9c10x compressed images.

Under certain conditions sonixb compressed frame size can get bigger then
the uncompressed size (seen with 0c45:6028), so make the buffers slightly
bigger.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 8eaeaa3a96d..346305b1264 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -207,29 +207,29 @@ static struct ctrl sd_ctrls[] = {
 static struct v4l2_pix_format vga_mode[] = {
 	{160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120,
+		.sizeimage = 160 * 120 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2},
 	{320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 320,
-		.sizeimage = 320 * 240,
+		.sizeimage = 320 * 240 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
 	{640, 480, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 640,
-		.sizeimage = 640 * 480,
+		.sizeimage = 640 * 480 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
 };
 static struct v4l2_pix_format sif_mode[] = {
 	{176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144,
+		.sizeimage = 176 * 144 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
 	{352, 288, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 352,
-		.sizeimage = 352 * 288,
+		.sizeimage = 352 * 288 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 0},
 };
-- 
GitLab


From c437d657c59921b048997d5bc1f5733670112902 Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Wed, 3 Sep 2008 17:12:22 -0300
Subject: [PATCH 757/869] V4L/DVB (8835): gspca: Same pixfmt as the sn9c102
 driver and raw Bayer added in sonixb.

1) Lower the hstart setting for all sensor by 1 so that we generate
   (compressed) BGGR data just like sn9c102 does (instead of GBRG data)
2) Add support for raw bayer output in the lowest resolutions (not enough
   bandwidth for higher resolutions), this should work with all sensors but
   to be sure only enable it for sensors where it has been tested.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c | 54 ++++++++++++++++++++++++------
 1 file changed, 44 insertions(+), 10 deletions(-)

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 346305b1264..5033810f56f 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -74,6 +74,10 @@ struct sensor_data {
 /* sensor_data flags */
 #define F_GAIN 0x01		/* has gain */
 #define F_SIF  0x02		/* sif or vga */
+#define F_RAW  0x04		/* sensor tested ok with raw bayer mode */
+
+/* priv field of struct v4l2_pix_format flags (do not use low nibble!) */
+#define MODE_RAW 0x10		/* raw bayer mode */
 
 /* ctrl_dis helper macros */
 #define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
@@ -205,6 +209,11 @@ static struct ctrl sd_ctrls[] = {
 };
 
 static struct v4l2_pix_format vga_mode[] = {
+	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2 | MODE_RAW},
 	{160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 160 * 120 * 5 / 4,
@@ -222,6 +231,11 @@ static struct v4l2_pix_format vga_mode[] = {
 		.priv = 0},
 };
 static struct v4l2_pix_format sif_mode[] = {
+	{176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 176 * 144,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1 | MODE_RAW},
 	{176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 176,
 		.sizeimage = 176 * 144 * 5 / 4,
@@ -237,7 +251,7 @@ static struct v4l2_pix_format sif_mode[] = {
 static const __u8 initHv7131[] = {
 	0x46, 0x77, 0x00, 0x04, 0x00, 0x00, 0x00, 0x80, 0x11, 0x00, 0x00, 0x00,
 	0x00, 0x00,
-	0x00, 0x00, 0x00, 0x03, 0x01, 0x00,	/* shift from 0x02 0x01 0x00 */
+	0x00, 0x00, 0x00, 0x02, 0x01, 0x00,
 	0x28, 0x1e, 0x60, 0x8a, 0x20,
 	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c
 };
@@ -251,7 +265,7 @@ static const __u8 hv7131_sensor_init[][8] = {
 static const __u8 initOv6650[] = {
 	0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
 	0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-	0x00, 0x02, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b,
+	0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b,
 	0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00
 };
 static const __u8 ov6650_sensor_init[][8] =
@@ -290,7 +304,7 @@ static const __u8 ov6650_sensor_init[][8] =
 static const __u8 initOv7630[] = {
 	0x04, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,	/* r01 .. r08 */
 	0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,	/* r09 .. r10 */
-	0x00, 0x02, 0x01, 0x0a,				/* r11 .. r14 */
+	0x00, 0x01, 0x01, 0x0a,				/* r11 .. r14 */
 	0x28, 0x1e,			/* H & V sizes     r15 .. r16 */
 	0x68, COMP2, MCK_INIT1,				/* r17 .. r19 */
 	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c		/* r1a .. r1f */
@@ -334,7 +348,7 @@ static const __u8 ov7630_sensor_init_3[][8] = {
 static const __u8 initPas106[] = {
 	0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x40, 0x00, 0x00, 0x00,
 	0x00, 0x00,
-	0x00, 0x00, 0x00, 0x05, 0x01, 0x00,
+	0x00, 0x00, 0x00, 0x04, 0x01, 0x00,
 	0x16, 0x12, 0x24, COMP1, MCK_INIT1,
 	0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
 };
@@ -384,7 +398,7 @@ static const __u8 pas106_sensor_init[][8] = {
 static const __u8 initPas202[] = {
 	0x44, 0x44, 0x21, 0x30, 0x00, 0x00, 0x00, 0x80, 0x40, 0x00, 0x00, 0x00,
 	0x00, 0x00,
-	0x00, 0x00, 0x00, 0x07, 0x03, 0x0a,	/* 6 */
+	0x00, 0x00, 0x00, 0x06, 0x03, 0x0a,
 	0x28, 0x1e, 0x28, 0x89, 0x20,
 	0x00, 0x00, 0x02, 0x03, 0x0f, 0x0c
 };
@@ -415,7 +429,7 @@ static const __u8 pas202_sensor_init[][8] = {
 static const __u8 initTas5110[] = {
 	0x44, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
 	0x00, 0x00,
-	0x00, 0x01, 0x00, 0x46, 0x09, 0x0a,	/* shift from 0x45 0x09 0x0a */
+	0x00, 0x01, 0x00, 0x45, 0x09, 0x0a,
 	0x16, 0x12, 0x60, 0x86, 0x2b,
 	0x14, 0x0a, 0x02, 0x02, 0x09, 0x07
 };
@@ -428,7 +442,7 @@ static const __u8 tas5110_sensor_init[][8] = {
 static const __u8 initTas5130[] = {
 	0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x11, 0x00, 0x00, 0x00,
 	0x00, 0x00,
-	0x00, 0x01, 0x00, 0x69, 0x0c, 0x0a,
+	0x00, 0x01, 0x00, 0x68, 0x0c, 0x0a,
 	0x28, 0x1e, 0x60, COMP, MCK_INIT,
 	0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
 };
@@ -442,14 +456,15 @@ static const __u8 tas5130_sensor_init[][8] = {
 
 struct sensor_data sensor_data[] = {
 SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
-SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
+SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF|F_RAW, 0,
+	0x60),
 SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
 	F_GAIN, 0, 0x21),
 SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
 	0),
-SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
+SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, F_RAW,
 	NO_EXPO|NO_FREQ, 0),
-SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
+SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF|F_RAW,
 	NO_BRIGHTNESS|NO_FREQ, 0),
 SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
 	0),
@@ -819,6 +834,10 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->cam_mode = sif_mode;
 		cam->nmodes = ARRAY_SIZE(sif_mode);
 	}
+	if (!(sensor_data[sd->sensor].flags & F_RAW)) {
+		cam->cam_mode++;
+		cam->nmodes--;
+	}
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->gain = GAIN_DEF;
 	sd->exposure = EXPOSURE_DEF;
@@ -867,6 +886,9 @@ static void sd_start(struct gspca_dev *gspca_dev)
 		reg17_19[2] = mode ? 0x23 : 0x43;
 		break;
 	}
+	/* Disable compression when the raw bayer format has been selected */
+	if (gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & MODE_RAW)
+		reg17_19[1] &= ~0x80;
 
 	/* reg 0x01 bit 2 video transfert on */
 	reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1);
@@ -929,6 +951,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 {
 	int i;
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
 
 	/* frames start with:
 	 *	ff ff 00 c4 c4 96	synchro
@@ -982,6 +1005,17 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			}
 		}
 	}
+
+	if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW) {
+		/* In raw mode we sometimes get some garbage after the frame
+		   ignore this */
+		int used = frame->data_end - frame->data;
+		int size = cam->cam_mode[gspca_dev->curr_mode].sizeimage;
+
+		if (used + len > size)
+			len = size - used;
+	}
+
 	gspca_frame_add(gspca_dev, INTER_PACKET,
 			frame, data, len);
 }
-- 
GitLab


From 1d434012f23effdc69d58a88229159b57256f6ba Mon Sep 17 00:00:00 2001
From: Jean Delvare <khali@linux-fr.org>
Date: Wed, 3 Sep 2008 17:12:23 -0300
Subject: [PATCH 758/869] V4L/DVB (8837): dvb: fix I2C adapters name size

Some DVB drivers are incorrectly assuming that the size of
i2c_adapter.name is I2C_NAME_SIZE.  Here's a fix.

Also change strncpy to strlcpy, as the former is error-prone (and was
indeed incorrectly used.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Uwe Bugla <uwe.bugla@gmx.de>
Reviewed-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/b2c2/flexcop-i2c.c  | 12 ++++++------
 drivers/media/dvb/frontends/cx24123.c |  4 ++--
 drivers/media/dvb/frontends/s5h1420.c |  3 ++-
 3 files changed, 10 insertions(+), 9 deletions(-)

diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c
index 55973eaf371..43a112ec6d4 100644
--- a/drivers/media/dvb/b2c2/flexcop-i2c.c
+++ b/drivers/media/dvb/b2c2/flexcop-i2c.c
@@ -221,12 +221,12 @@ int flexcop_i2c_init(struct flexcop_device *fc)
 	fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM;
 	fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER;
 
-	strncpy(fc->fc_i2c_adap[0].i2c_adap.name,
-		"B2C2 FlexCop I2C to demod", I2C_NAME_SIZE);
-	strncpy(fc->fc_i2c_adap[1].i2c_adap.name,
-		"B2C2 FlexCop I2C to eeprom", I2C_NAME_SIZE);
-	strncpy(fc->fc_i2c_adap[2].i2c_adap.name,
-		"B2C2 FlexCop I2C to tuner", I2C_NAME_SIZE);
+	strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod",
+		sizeof(fc->fc_i2c_adap[0].i2c_adap.name));
+	strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom",
+		sizeof(fc->fc_i2c_adap[1].i2c_adap.name));
+	strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner",
+		sizeof(fc->fc_i2c_adap[2].i2c_adap.name));
 
 	i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]);
 	i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]);
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index 386bd7472b9..7156157cb34 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -1072,8 +1072,8 @@ struct dvb_frontend* cx24123_attach(const struct cx24123_config* config,
     if (config->dont_use_pll)
 	cx24123_repeater_mode(state, 1, 0);
 
-	strncpy(state->tuner_i2c_adapter.name,
-		"CX24123 tuner I2C bus", I2C_NAME_SIZE);
+	strlcpy(state->tuner_i2c_adapter.name, "CX24123 tuner I2C bus",
+		sizeof(state->tuner_i2c_adapter.name));
 	state->tuner_i2c_adapter.class     = I2C_CLASS_TV_DIGITAL,
 	state->tuner_i2c_adapter.algo      = &cx24123_tuner_i2c_algo;
 	state->tuner_i2c_adapter.algo_data = NULL;
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index 720ed9ff7c5..747d3fa2e5e 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -915,7 +915,8 @@ struct dvb_frontend *s5h1420_attach(const struct s5h1420_config *config,
 	state->frontend.demodulator_priv = state;
 
 	/* create tuner i2c adapter */
-	strncpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus", I2C_NAME_SIZE);
+	strlcpy(state->tuner_i2c_adapter.name, "S5H1420-PN1010 tuner I2C bus",
+		sizeof(state->tuner_i2c_adapter.name));
 	state->tuner_i2c_adapter.class     = I2C_CLASS_TV_DIGITAL,
 	state->tuner_i2c_adapter.algo      = &s5h1420_tuner_i2c_algo;
 	state->tuner_i2c_adapter.algo_data = NULL;
-- 
GitLab


From af2a887c9aaca82306e9744d914ac335051ce987 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Wed, 3 Sep 2008 17:12:24 -0300
Subject: [PATCH 759/869] V4L/DVB (8839): dib0700: add comment to identify 35th
 USB id pair

This comment helps to make the code more readable.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/dib0700_devices.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 3dd20bfbed3..e182aa15c6a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1117,7 +1117,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS) },
 	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
-	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+/* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
-- 
GitLab


From 9a0c04a1ee3b4df6a30ae6975e13c558908df400 Mon Sep 17 00:00:00 2001
From: Michael Krufky <mkrufky@linuxtv.org>
Date: Wed, 3 Sep 2008 17:12:24 -0300
Subject: [PATCH 760/869] V4L/DVB (8840): dib0700: add basic support for
 Hauppauge Nova-TD-500 (84xxx)

This adds basic support for the Hauppauge Nova-TD-500 84xxx series.

A future patch will allow for one aerial input to supply both tuners.

With the current code, an aerial must be plugged into each antannae input
in order for both tuners to function.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/dvb-usb/dib0700_devices.c | 7 ++++++-
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h     | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index e182aa15c6a..6c0e5c5f436 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -1118,6 +1118,7 @@ struct usb_device_id dib0700_usb_id_table[] = {
 	{ USB_DEVICE(USB_VID_TERRATEC,	USB_PID_TERRATEC_CINERGY_T_XXS) },
 	{ USB_DEVICE(USB_VID_LEADTEK,   USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
 /* 35 */{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009) },
+	{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_3) },
 	{ 0 }		/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1373,7 +1374,7 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			}
 		},
 
-		.num_device_descs = 3,
+		.num_device_descs = 4,
 		.devices = {
 			{   "DiBcom STK7070PD reference design",
 				{ &dib0700_usb_id_table[17], NULL },
@@ -1386,6 +1387,10 @@ struct dvb_usb_device_properties dib0700_devices[] = {
 			{   "Hauppauge Nova-TD Stick (52009)",
 				{ &dib0700_usb_id_table[35], NULL },
 				{ NULL },
+			},
+			{   "Hauppauge Nova-TD-500 (84xxx)",
+				{ &dib0700_usb_id_table[36], NULL },
+				{ NULL },
 			}
 		}
 	}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 029b437caf9..03dfb9f2fe3 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -129,6 +129,7 @@
 #define USB_PID_WINTV_NOVA_T_USB2_WARM			0x9301
 #define USB_PID_HAUPPAUGE_NOVA_T_500			0x9941
 #define USB_PID_HAUPPAUGE_NOVA_T_500_2			0x9950
+#define USB_PID_HAUPPAUGE_NOVA_T_500_3			0x8400
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK			0x7050
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_2		0x7060
 #define USB_PID_HAUPPAUGE_NOVA_T_STICK_3		0x7070
-- 
GitLab


From 8da9bae3292ea8aee803e7cda295877c361f0694 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 3 Sep 2008 17:12:25 -0300
Subject: [PATCH 761/869] V4L/DVB (8842): vivi_release(): fix use-after-free

video_device_release() does kfree(), which made the following printk()
doing a use-after-free.

printk() first and release then.

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/vivi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index f55d77db155..8ba8daafd7e 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -1021,13 +1021,13 @@ static int vivi_release(void)
 		dev = list_entry(list, struct vivi_dev, vivi_devlist);
 
 		if (-1 != dev->vfd->minor) {
-			video_unregister_device(dev->vfd);
-			printk(KERN_INFO "%s: /dev/video%d unregistered.\n",
+			printk(KERN_INFO "%s: unregistering /dev/video%d\n",
 				VIVI_MODULE_NAME, dev->vfd->minor);
+			video_unregister_device(dev->vfd);
 		} else {
-			video_device_release(dev->vfd);
-			printk(KERN_INFO "%s: /dev/video%d released.\n",
+			printk(KERN_INFO "%s: releasing /dev/video%d\n",
 				VIVI_MODULE_NAME, dev->vfd->minor);
+			video_device_release(dev->vfd);
 		}
 
 		kfree(dev);
-- 
GitLab


From 877b5f4eda501ece641adbbea5d1940cbbfd4f38 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 3 Sep 2008 17:12:25 -0300
Subject: [PATCH 762/869] V4L/DVB (8843): tda10048_firmware_upload(): fix a
 memory leak

This patch fixes a memory leak ("fw" wasn't freed).

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/frontends/tda10048.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/dvb/frontends/tda10048.c b/drivers/media/dvb/frontends/tda10048.c
index 7727099a16f..04e7f1cc140 100644
--- a/drivers/media/dvb/frontends/tda10048.c
+++ b/drivers/media/dvb/frontends/tda10048.c
@@ -303,7 +303,7 @@ static int tda10048_firmware_upload(struct dvb_frontend *fe)
 
 	if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) {
 		printk(KERN_ERR "%s: firmware incorrect size\n", __func__);
-		return -EIO;
+		ret = -EIO;
 	} else {
 		printk(KERN_INFO "%s: firmware uploading\n", __func__);
 
-- 
GitLab


From 5d8538c1c6d85a7979c955b34f0e66d03be43da4 Mon Sep 17 00:00:00 2001
From: Adrian Bunk <bunk@kernel.org>
Date: Wed, 3 Sep 2008 17:12:25 -0300
Subject: [PATCH 763/869] V4L/DVB (8844): dabusb_fpga_download(): fix a memory
 leak

This patch fixes a memory leak in an error path.

Reported-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/dabusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index 48f4b92a8f8..79faedf5852 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -403,6 +403,7 @@ static int dabusb_fpga_download (pdabusb_t s, const char *fname)
 	ret = request_firmware(&fw, "dabusb/bitstream.bin", &s->usbdev->dev);
 	if (ret) {
 		err("Failed to load \"dabusb/bitstream.bin\": %d\n", ret);
+		kfree(b);
 		return ret;
 	}
 
-- 
GitLab


From 437cf2f1c5f05e34510f43e129af29a716b04ce6 Mon Sep 17 00:00:00 2001
From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 3 Sep 2008 14:38:00 -0700
Subject: [PATCH 764/869] bnx2x: Accessing un-mapped page

The allocated RX buffer size was 64 bytes bigger than the PCI mapped
size with no good reason. If the packet was actually using the buffer up
to its limit and if the last 64 bytes of the buffer crossed 4KB boundary
then an unmapped PCI page was accessed. The fix is to use only one
parameter for the buffer size - there is no need to differentiate
between the buffer size and the PCI mapping size since the extra 64
bytes can actually be used by the FW to align the Ethernet payload to
64 bytes.

Also updating the driver version and date

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 drivers/net/bnx2x.h      |  5 +++--
 drivers/net/bnx2x_main.c | 34 +++++++++++++++++-----------------
 2 files changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index a14dba1afcc..fd705d1295a 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -151,6 +151,8 @@ struct sw_rx_page {
 #define PAGES_PER_SGE_SHIFT		0
 #define PAGES_PER_SGE			(1 << PAGES_PER_SGE_SHIFT)
 
+#define BCM_RX_ETH_PAYLOAD_ALIGN	64
+
 /* SGE ring related macros */
 #define NUM_RX_SGE_PAGES		2
 #define RX_SGE_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
@@ -750,8 +752,7 @@ struct bnx2x {
 
 	u32			rx_csum;
 	u32			rx_offset;
-	u32			rx_buf_use_size;	/* useable size */
-	u32			rx_buf_size;		/* with alignment */
+	u32			rx_buf_size;
 #define ETH_OVREHEAD			(ETH_HLEN + 8)	/* 8 for CRC + VLAN */
 #define ETH_MIN_PACKET_SIZE		60
 #define ETH_MAX_PACKET_SIZE		1500
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 82deea0a63f..a8eb3c4a47c 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -59,8 +59,8 @@
 #include "bnx2x.h"
 #include "bnx2x_init.h"
 
-#define DRV_MODULE_VERSION	"1.45.20"
-#define DRV_MODULE_RELDATE	"2008/08/25"
+#define DRV_MODULE_VERSION	"1.45.21"
+#define DRV_MODULE_RELDATE	"2008/09/03"
 #define BNX2X_BC_VER		0x040200
 
 /* Time in jiffies before concluding the transmitter is hung */
@@ -1027,7 +1027,7 @@ static inline int bnx2x_alloc_rx_skb(struct bnx2x *bp,
 	if (unlikely(skb == NULL))
 		return -ENOMEM;
 
-	mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size,
+	mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_size,
 				 PCI_DMA_FROMDEVICE);
 	if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) {
 		dev_kfree_skb(skb);
@@ -1169,7 +1169,7 @@ static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue,
 	/* move empty skb from pool to prod and map it */
 	prod_rx_buf->skb = fp->tpa_pool[queue].skb;
 	mapping = pci_map_single(bp->pdev, fp->tpa_pool[queue].skb->data,
-				 bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+				 bp->rx_buf_size, PCI_DMA_FROMDEVICE);
 	pci_unmap_addr_set(prod_rx_buf, mapping, mapping);
 
 	/* move partial skb from cons to pool (don't unmap yet) */
@@ -1276,7 +1276,7 @@ static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp,
 	   pool entry status to BNX2X_TPA_STOP even if new skb allocation
 	   fails. */
 	pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping),
-			 bp->rx_buf_use_size, PCI_DMA_FROMDEVICE);
+			 bp->rx_buf_size, PCI_DMA_FROMDEVICE);
 
 	if (likely(new_skb)) {
 		/* fix ip xsum and give it to the stack */
@@ -1520,7 +1520,7 @@ static int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget)
 			} else if (bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0) {
 				pci_unmap_single(bp->pdev,
 					pci_unmap_addr(rx_buf, mapping),
-						 bp->rx_buf_use_size,
+						 bp->rx_buf_size,
 						 PCI_DMA_FROMDEVICE);
 				skb_reserve(skb, pad);
 				skb_put(skb, len);
@@ -4229,7 +4229,7 @@ static inline void bnx2x_free_tpa_pool(struct bnx2x *bp,
 		if (fp->tpa_state[i] == BNX2X_TPA_START)
 			pci_unmap_single(bp->pdev,
 					 pci_unmap_addr(rx_buf, mapping),
-					 bp->rx_buf_use_size,
+					 bp->rx_buf_size,
 					 PCI_DMA_FROMDEVICE);
 
 		dev_kfree_skb(skb);
@@ -4245,15 +4245,14 @@ static void bnx2x_init_rx_rings(struct bnx2x *bp)
 	u16 ring_prod, cqe_ring_prod;
 	int i, j;
 
-	bp->rx_buf_use_size = bp->dev->mtu;
-	bp->rx_buf_use_size += bp->rx_offset + ETH_OVREHEAD;
-	bp->rx_buf_size = bp->rx_buf_use_size + 64;
+	bp->rx_buf_size = bp->dev->mtu;
+	bp->rx_buf_size += bp->rx_offset + ETH_OVREHEAD +
+		BCM_RX_ETH_PAYLOAD_ALIGN;
 
 	if (bp->flags & TPA_ENABLE_FLAG) {
 		DP(NETIF_MSG_IFUP,
-		   "rx_buf_use_size %d  rx_buf_size %d  effective_mtu %d\n",
-		   bp->rx_buf_use_size, bp->rx_buf_size,
-		   bp->dev->mtu + ETH_OVREHEAD);
+		   "rx_buf_size %d  effective_mtu %d\n",
+		   bp->rx_buf_size, bp->dev->mtu + ETH_OVREHEAD);
 
 		for_each_queue(bp, j) {
 			struct bnx2x_fastpath *fp = &bp->fp[j];
@@ -4462,9 +4461,10 @@ static void bnx2x_init_context(struct bnx2x *bp)
 		context->ustorm_st_context.common.status_block_id = sb_id;
 		context->ustorm_st_context.common.flags =
 			USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_MC_ALIGNMENT;
-		context->ustorm_st_context.common.mc_alignment_size = 64;
+		context->ustorm_st_context.common.mc_alignment_size =
+			BCM_RX_ETH_PAYLOAD_ALIGN;
 		context->ustorm_st_context.common.bd_buff_size =
-						bp->rx_buf_use_size;
+						bp->rx_buf_size;
 		context->ustorm_st_context.common.bd_page_base_hi =
 						U64_HI(fp->rx_desc_mapping);
 		context->ustorm_st_context.common.bd_page_base_lo =
@@ -4717,7 +4717,7 @@ static void bnx2x_init_internal_func(struct bnx2x *bp)
 	}
 
 	/* Init CQ ring mapping and aggregation size */
-	max_agg_size = min((u32)(bp->rx_buf_use_size +
+	max_agg_size = min((u32)(bp->rx_buf_size +
 				 8*BCM_PAGE_SIZE*PAGES_PER_SGE),
 			   (u32)0xffff);
 	for_each_queue(bp, i) {
@@ -5940,7 +5940,7 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp)
 
 			pci_unmap_single(bp->pdev,
 					 pci_unmap_addr(rx_buf, mapping),
-					 bp->rx_buf_use_size,
+					 bp->rx_buf_size,
 					 PCI_DMA_FROMDEVICE);
 
 			rx_buf->skb = NULL;
-- 
GitLab


From 8e531af90f3940615623dc0aa6c94866a6773601 Mon Sep 17 00:00:00 2001
From: Eric Paris <eparis@redhat.com>
Date: Wed, 3 Sep 2008 11:49:47 -0400
Subject: [PATCH 765/869] SELinux: memory leak in security_context_to_sid_core

Fix a bug and a philosophical decision about who handles errors.

security_context_to_sid_core() was leaking a context in the common case.
This was causing problems on fedora systems which recently have started
making extensive use of this function.

In discussion it was decided that if string_to_context_struct() had an
error it was its own responsibility to clean up any mess it created
along the way.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
---
 security/selinux/ss/services.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/security/selinux/ss/services.c b/security/selinux/ss/services.c
index b52f923ce68..d11a8154500 100644
--- a/security/selinux/ss/services.c
+++ b/security/selinux/ss/services.c
@@ -811,11 +811,12 @@ static int string_to_context_struct(struct policydb *pol,
 	/* Check the validity of the new context. */
 	if (!policydb_context_isvalid(pol, ctx)) {
 		rc = -EINVAL;
-		context_destroy(ctx);
 		goto out;
 	}
 	rc = 0;
 out:
+	if (rc)
+		context_destroy(ctx);
 	return rc;
 }
 
@@ -868,8 +869,7 @@ static int security_context_to_sid_core(const char *scontext, u32 scontext_len,
 	} else if (rc)
 		goto out;
 	rc = sidtab_context_to_sid(&sidtab, &context, sid);
-	if (rc)
-		context_destroy(&context);
+	context_destroy(&context);
 out:
 	read_unlock(&policy_rwlock);
 	kfree(scontext2);
-- 
GitLab


From e6a5652fd156a286faadbf7a4062b5354d4e346e Mon Sep 17 00:00:00 2001
From: Chuck Ebbert <cebbert@redhat.com>
Date: Wed, 3 Sep 2008 19:33:14 -0400
Subject: [PATCH 766/869] x86: add io delay quirk for Presario F700

Manually adding "io_delay=0xed" fixes system lockups in ioapic
mode on this machine.

System Information
	Manufacturer: Hewlett-Packard
	Product Name: Presario F700 (KA695EA#ABF)

Base Board Information
	Manufacturer: Quanta
	Product Name: 30D3

Reference:
https://bugzilla.redhat.com/show_bug.cgi?id=459546

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/io_delay.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index 1c3a66a67f8..720d2607aac 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -92,6 +92,14 @@ static struct dmi_system_id __initdata io_delay_0xed_port_dmi_table[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "30BF")
 		}
 	},
+	{
+		.callback	= dmi_io_delay_0xed_port,
+		.ident		= "Presario F700",
+		.matches	= {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Quanta"),
+			DMI_MATCH(DMI_BOARD_NAME, "30D3")
+		}
+	},
 	{ }
 };
 
-- 
GitLab


From ce36394269ccd9d1d286d6192ba09fa6894365e9 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 3 Sep 2008 16:09:47 +0200
Subject: [PATCH 767/869] mmap: fix petty bug in anonymous shared mmap offset
 handling

Anonymous mappings should ignore offset but shared anonymous mapping
forgot to clear it and makes the following legit test program trigger
SIGBUS.

 #include <sys/mman.h>
 #include <stdio.h>
 #include <errno.h>

 #define PAGE_SIZE	4096

 int main(void)
 {
	 char *p;
	 int i;

	 p = mmap(NULL, 2 * PAGE_SIZE, PROT_READ|PROT_WRITE,
		  MAP_SHARED|MAP_ANONYMOUS, -1, PAGE_SIZE);
	 if (p == MAP_FAILED) {
		 perror("mmap");
		 return 1;
	 }

	 for (i = 0; i < 2; i++) {
		 printf("page %d\n", i);
		 p[i * 4096] = i;
	 }
	 return 0;
 }

Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Hugh Dickins <hugh@veritas.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 mm/mmap.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/mm/mmap.c b/mm/mmap.c
index 339cf5c4d5d..e7a5a68a9c2 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1030,6 +1030,10 @@ unsigned long do_mmap_pgoff(struct file * file, unsigned long addr,
 	} else {
 		switch (flags & MAP_TYPE) {
 		case MAP_SHARED:
+			/*
+			 * Ignore pgoff.
+			 */
+			pgoff = 0;
 			vm_flags |= VM_SHARED | VM_MAYSHARE;
 			break;
 		case MAP_PRIVATE:
-- 
GitLab


From de014d617636d6a6bd5aef3b3d1f7f9a35669057 Mon Sep 17 00:00:00 2001
From: Alok N Kataria <akataria@vmware.com>
Date: Wed, 3 Sep 2008 18:18:01 -0700
Subject: [PATCH 768/869] x86: Change warning message in TSC calibration.

When calibration against PIT fails, the warning that we print is misleading.
In a virtualized environment the VM may get descheduled while calibration
or, the check in PIT calibration may fail due to other virtualization
overheads.

The warning message explicitly assumes that calibration failed due to SMI's
which may not be the case. Change that to something proper.

Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/x86/kernel/tsc.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 346cae5ac42..8f98e9de1b8 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -267,8 +267,7 @@ unsigned long native_calibrate_tsc(void)
 	 */
 	if (tsc_pit_min == ULONG_MAX) {
 		/* PIT gave no useful value */
-		printk(KERN_WARNING "TSC: PIT calibration failed due to "
-		       "SMI disturbance.\n");
+		printk(KERN_WARNING "TSC: Unable to calibrate against PIT\n");
 
 		/* We don't have an alternative source, disable TSC */
 		if (!hpet && !pm1 && !pm2) {
-- 
GitLab


From 5f17cfce5776c566d64430f543a289e5cfa4538b Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Thu, 4 Sep 2008 01:33:59 -0700
Subject: [PATCH 769/869] PCI: fix pbus_size_mem() resource alignment for
 CardBus controllers

Commit 884525655d07fdee9245716b998ecdc45cdd8007 ("PCI: clean up resource
alignment management") changed the resource handling to mark how a
resource was aligned on a per-resource basis.

Thus, instead of looking at the resource number to determine whether it
was a bridge resource or a regular resource (they have different
alignment rules), we should just ask the resource for its alignment
directly.

The reason this broke only cardbus resources was that for the other
types of resources, the old way of deciding alignment actually still
happened to work.  But CardBus bridge resources had been changed by
commit 934b7024f0ed29003c95cef447d92737ab86dc4f ("Fix cardbus resource
allocation") to look more like regular resources than PCI bridge
resources from an alignment handling standpoint.

Reported-and-tested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/pci/setup-bus.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index 82634a2f1b1..1aad599816f 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -352,11 +352,12 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask, unsigned long
 				continue;
 			r_size = r->end - r->start + 1;
 			/* For bridges size != alignment */
-			align = (i < PCI_BRIDGE_RESOURCES) ? r_size : r->start;
+			align = resource_alignment(r);
 			order = __ffs(align) - 20;
 			if (order > 11) {
-				dev_warn(&dev->dev, "BAR %d too large: "
+				dev_warn(&dev->dev, "BAR %d bad alignment %llx: "
 				       "%#016llx-%#016llx\n", i,
+				       (unsigned long long)align,
 				       (unsigned long long)r->start,
 				       (unsigned long long)r->end);
 				r->flags = 0;
-- 
GitLab


From c3df1a2685004bce97827bdbe7a304734009849b Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 3 Sep 2008 23:59:23 +0100
Subject: [PATCH 770/869] [ARM] omap: fix build error in ohci-omap.c

drivers/usb/host/ohci-omap.c: In function 'ohci_omap_init':
drivers/usb/host/ohci-omap.c:228: error: 'start_hnp' undeclared (first use in this function)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 drivers/usb/host/ohci-omap.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 1eb64d08b60..95b3ec89c12 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -208,7 +208,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 	if (cpu_is_omap16xx())
 		ocpi_enable();
 
-#ifdef	CONFIG_ARCH_OMAP_OTG
+#ifdef	CONFIG_USB_OTG
 	if (need_transceiver) {
 		ohci->transceiver = otg_get_transceiver();
 		if (ohci->transceiver) {
-- 
GitLab


From 8b540fdcb7c445d61955991f071e956ef40a2f17 Mon Sep 17 00:00:00 2001
From: Huang Weiyi <weiyi.huang@gmail.com>
Date: Sat, 23 Aug 2008 13:56:02 +0800
Subject: [PATCH 771/869] [ARM] remove unused #include <version.h>

The driver(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  arch/arm/plat-mxc/clock.c

This patch removes the said #include <version.h>.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/plat-mxc/clock.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 2f862721883..0a38f0b396e 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -37,7 +37,6 @@
 #include <linux/proc_fs.h>
 #include <linux/semaphore.h>
 #include <linux/string.h>
-#include <linux/version.h>
 
 #include <mach/clock.h>
 
-- 
GitLab


From 54cd3148a149f7413cc25cb832f42cf0dabcee29 Mon Sep 17 00:00:00 2001
From: Andi Kleen <ak@linux.intel.com>
Date: Thu, 4 Sep 2008 13:30:07 +0200
Subject: [PATCH 772/869] ACPI: Make Len Brown the ACPI maintainer again

Len is back!

Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 MAINTAINERS | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 663485b004f..9fc7c1c7e1b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -222,8 +222,7 @@ W:	http://code.google.com/p/aceracpi
 S:	Maintained
 
 ACPI
-P:	Andi Kleen
-M:	ak@linux.intel.com
+P:	Len Brown
 M:	lenb@kernel.org
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
-- 
GitLab


From d8196a93b1ce9a5abb410f39f9375912c9e53675 Mon Sep 17 00:00:00 2001
From: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Date: Fri, 29 Aug 2008 11:06:21 +0930
Subject: [PATCH 773/869] fujitsu-laptop: fix regression for P8010 in 2.6.27-rc

The following patch (based on a patch from Stephen Gildea) fixes a
regression with the LCD brightness keys on Fujitsu P8010 laptops which was
observed with the 2.6.27-rc series (basically they stopped working due to
changes within the fujitsu-laptop and video modules).  Please apply to
2.6.27-rc and acpi git.

A more complete solution for this laptop will be included in an upcoming
patch, hopefully for 2.6.28.  In the meantime this restores most
functionality for P8010 users.

Signed-off-by: Stephen Gildea <stepheng+fujitsu-laptop@gildea.com>
Signed-off-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/misc/fujitsu-laptop.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index 7a1ef6c262d..3e56203e494 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -463,6 +463,13 @@ static struct dmi_system_id __initdata fujitsu_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK S6410"),
 		     },
 	 .callback = dmi_check_cb_s6410},
+	{
+	 .ident = "FUJITSU LifeBook P8010",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P8010"),
+		    },
+	 .callback = dmi_check_cb_s6410},
 	{}
 };
 
-- 
GitLab


From 266feefeb9ea2d846ac82eb6db1a54b230364ba4 Mon Sep 17 00:00:00 2001
From: Zhao Yakui <yakui.zhao@intel.com>
Date: Tue, 26 Aug 2008 13:57:34 +0800
Subject: [PATCH 774/869] ACPI: Avoid bogus timeout about SMbus check
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

In the function of wait_transaction_complete when the timeout happens,
OS will try to check the status of SMbus again. If the status is what OS
expected, it will be regarded as the bogus timeout. Otherwise it will be
treated as ETIME.

http://bugzilla.kernel.org/show_bug.cgi?id=10483

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
tested-by    : Oldřich Jedlička < <oldium.pro@seznam.cz>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/acpi/sbshc.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c
index bcf2c70fca8..a4e3767b8c6 100644
--- a/drivers/acpi/sbshc.c
+++ b/drivers/acpi/sbshc.c
@@ -107,6 +107,13 @@ static int wait_transaction_complete(struct acpi_smb_hc *hc, int timeout)
 	if (wait_event_timeout(hc->wait, smb_check_done(hc),
 			       msecs_to_jiffies(timeout)))
 		return 0;
+	/*
+	 * After the timeout happens, OS will try to check the status of SMbus.
+	 * If the status is what OS expected, it will be regarded as the bogus
+	 * timeout.
+	 */
+	if (smb_check_done(hc))
+		return 0;
 	else
 		return -ETIME;
 }
-- 
GitLab


From 7d964c352b06aabb895e39d3b479e105bd9d1ca0 Mon Sep 17 00:00:00 2001
From: Russ Dill <russ.dill@gmail.com>
Date: Tue, 2 Sep 2008 14:35:40 -0700
Subject: [PATCH 775/869] acer-wmi: remove debugfs entries upon unloading

The exit function neglects to remove debugfs entries, leading to a BUG
on reload.

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Russ Dill <Russ.Dill@gmail.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
 drivers/misc/acer-wmi.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c
index e7a3fe508df..9c883f8b389 100644
--- a/drivers/misc/acer-wmi.c
+++ b/drivers/misc/acer-wmi.c
@@ -1167,7 +1167,7 @@ static int create_debugfs(void)
 	return 0;
 
 error_debugfs:
-		remove_debugfs();
+	remove_debugfs();
 	return -ENOMEM;
 }
 
@@ -1248,6 +1248,7 @@ error_platform_register:
 static void __exit acer_wmi_exit(void)
 {
 	remove_sysfs(acer_platform_device);
+	remove_debugfs();
 	platform_device_del(acer_platform_device);
 	platform_driver_unregister(&acer_platform_driver);
 
-- 
GitLab


From b380b0d4f7dffcc235c0facefa537d4655619101 Mon Sep 17 00:00:00 2001
From: Al Viro <viro@ZenIV.linux.org.uk>
Date: Thu, 4 Sep 2008 17:05:57 +0100
Subject: [PATCH 776/869] forgotten refcount on sysctl root table

We should've set refcount on the root sysctl table; otherwise we'll blow
up the first time we get down to zero dynamically registered sysctl
tables.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 kernel/sysctl.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index fe471334727..50ec0886fa3 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -159,6 +159,7 @@ static int proc_dointvec_taint(struct ctl_table *table, int write, struct file *
 static struct ctl_table root_table[];
 static struct ctl_table_root sysctl_table_root;
 static struct ctl_table_header root_table_header = {
+	.count = 1,
 	.ctl_table = root_table,
 	.ctl_entry = LIST_HEAD_INIT(sysctl_table_root.default_set.list),
 	.root = &sysctl_table_root,
-- 
GitLab


From 9362773624bcde3ccc198fefcf3c584e5058f645 Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Thu, 4 Sep 2008 16:20:12 -0300
Subject: [PATCH 777/869] V4L/DVB (8868): gspca: Support for vga modes with sif
 sensors in sonixb.

- Add documentation for some known registers
- Add support for vga modes (320x240, 160x120) for sif sensors
- Remove F_RAW sensor flag raw mode should work on any sensor as its a bridge
   only thing and keeping the flag was becoming awkward.
- Fixup ov6650 and pas106 auto exposure window settings

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c | 96 +++++++++++++++++++++---------
 1 file changed, 67 insertions(+), 29 deletions(-)

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 5033810f56f..7f67148a523 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -20,6 +20,26 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
 
+/* Some documentation on known sonixb registers:
+
+Reg	Use
+0x10	high nibble red gain low nibble blue gain
+0x11	low nibble green gain
+0x12	hstart
+0x13	vstart
+0x15	hsize (hsize = register-value * 16)
+0x16	vsize (vsize = register-value * 16)
+0x17	bit 0 toggle compression quality (according to sn9c102 driver)
+0x18	bit 7 enables compression, bit 4-5 set image down scaling:
+	00 scale 1, 01 scale 1/2, 10, scale 1/4
+0x19	high-nibble is sensor clock divider, changes exposure on sensors which
+	use a clock generated by the bridge. Some sensors have their own clock.
+0x1c	auto_exposure area (for avg_lum) startx (startx = register-value * 32)
+0x1d	auto_exposure area (for avg_lum) starty (starty = register-value * 32)
+0x1e	auto_exposure area (for avg_lum) stopx (hsize = (0x1e - 0x1c) * 32)
+0x1f	auto_exposure area (for avg_lum) stopy (vsize = (0x1f - 0x1d) * 32)
+*/
+
 #define MODULE_NAME "sonixb"
 
 #include "gspca.h"
@@ -74,10 +94,10 @@ struct sensor_data {
 /* sensor_data flags */
 #define F_GAIN 0x01		/* has gain */
 #define F_SIF  0x02		/* sif or vga */
-#define F_RAW  0x04		/* sensor tested ok with raw bayer mode */
 
 /* priv field of struct v4l2_pix_format flags (do not use low nibble!) */
 #define MODE_RAW 0x10		/* raw bayer mode */
+#define MODE_REDUCED_SIF 0x20	/* vga mode (320x240 / 160x120) on sif cam */
 
 /* ctrl_dis helper macros */
 #define NO_EXPO ((1 << EXPOSURE_IDX) | (1 << AUTOGAIN_IDX))
@@ -211,7 +231,7 @@ static struct ctrl sd_ctrls[] = {
 static struct v4l2_pix_format vga_mode[] = {
 	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 160,
-		.sizeimage = 160 * 120,
+		.sizeimage = 160 * 120 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 2 | MODE_RAW},
 	{160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
@@ -231,9 +251,19 @@ static struct v4l2_pix_format vga_mode[] = {
 		.priv = 0},
 };
 static struct v4l2_pix_format sif_mode[] = {
+	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1 | MODE_RAW | MODE_REDUCED_SIF},
+	{160, 120, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120 * 5 / 4,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1 | MODE_REDUCED_SIF},
 	{176, 144, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
 		.bytesperline = 176,
-		.sizeimage = 176 * 144,
+		.sizeimage = 176 * 144 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1 | MODE_RAW},
 	{176, 144, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
@@ -241,6 +271,11 @@ static struct v4l2_pix_format sif_mode[] = {
 		.sizeimage = 176 * 144 * 5 / 4,
 		.colorspace = V4L2_COLORSPACE_SRGB,
 		.priv = 1},
+	{320, 240, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 * 5 / 4,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0 | MODE_REDUCED_SIF},
 	{352, 288, V4L2_PIX_FMT_SN9C10X, V4L2_FIELD_NONE,
 		.bytesperline = 352,
 		.sizeimage = 352 * 288 * 5 / 4,
@@ -266,7 +301,7 @@ static const __u8 initOv6650[] = {
 	0x44, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
 	0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 	0x00, 0x01, 0x01, 0x0a, 0x16, 0x12, 0x68, 0x8b,
-	0x10, 0x1d, 0x10, 0x00, 0x06, 0x1f, 0x00
+	0x10, 0x1d, 0x10, 0x02, 0x02, 0x09, 0x07
 };
 static const __u8 ov6650_sensor_init[][8] =
 {
@@ -350,7 +385,7 @@ static const __u8 initPas106[] = {
 	0x00, 0x00,
 	0x00, 0x00, 0x00, 0x04, 0x01, 0x00,
 	0x16, 0x12, 0x24, COMP1, MCK_INIT1,
-	0x18, 0x10, 0x04, 0x03, 0x11, 0x0c
+	0x18, 0x10, 0x02, 0x02, 0x09, 0x07
 };
 /* compression 0x86 mckinit1 0x2b */
 static const __u8 pas106_sensor_init[][8] = {
@@ -456,15 +491,14 @@ static const __u8 tas5130_sensor_init[][8] = {
 
 struct sensor_data sensor_data[] = {
 SENS(initHv7131, NULL, hv7131_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ, 0),
-SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF|F_RAW, 0,
-	0x60),
+SENS(initOv6650, NULL, ov6650_sensor_init, NULL, NULL, F_GAIN|F_SIF, 0, 0x60),
 SENS(initOv7630, initOv7630_3, ov7630_sensor_init, NULL, ov7630_sensor_init_3,
 	F_GAIN, 0, 0x21),
 SENS(initPas106, NULL, pas106_sensor_init, NULL, NULL, F_SIF, NO_EXPO|NO_FREQ,
 	0),
-SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, F_RAW,
+SENS(initPas202, initPas202, pas202_sensor_init, NULL, NULL, 0,
 	NO_EXPO|NO_FREQ, 0),
-SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF|F_RAW,
+SENS(initTas5110, NULL, tas5110_sensor_init, NULL, NULL, F_GAIN|F_SIF,
 	NO_BRIGHTNESS|NO_FREQ, 0),
 SENS(initTas5130, NULL, tas5130_sensor_init, NULL, NULL, 0, NO_EXPO|NO_FREQ,
 	0),
@@ -834,10 +868,6 @@ static int sd_config(struct gspca_dev *gspca_dev,
 		cam->cam_mode = sif_mode;
 		cam->nmodes = ARRAY_SIZE(sif_mode);
 	}
-	if (!(sensor_data[sd->sensor].flags & F_RAW)) {
-		cam->cam_mode++;
-		cam->nmodes--;
-	}
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->gain = GAIN_DEF;
 	sd->exposure = EXPOSURE_DEF;
@@ -864,31 +894,39 @@ static int sd_init(struct gspca_dev *gspca_dev)
 static void sd_start(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam = &gspca_dev->cam;
 	int mode, l;
 	const __u8 *sn9c10x;
-	__u8 reg17_19[3];
+	__u8 reg12_19[8];
 
-	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv & 0x07;
+	mode = cam->cam_mode[gspca_dev->curr_mode].priv & 0x07;
 	sn9c10x = sensor_data[sd->sensor].bridge_init[sd->bridge];
 	l = sensor_data[sd->sensor].bridge_init_size[sd->bridge];
-	reg17_19[0] = sn9c10x[0x17 - 1];
-	reg17_19[1] = sn9c10x[0x18 - 1] | (mode << 4);
-	reg17_19[2] = sn9c10x[0x19 - 1];
+	memcpy(reg12_19, &sn9c10x[0x12 - 1], 8);
+	reg12_19[6] = sn9c10x[0x18 - 1] | (mode << 4);
 	/* Special cases where reg 17 and or 19 value depends on mode */
 	switch (sd->sensor) {
 	case SENSOR_PAS202:
-		reg17_19[0] = mode ? 0x24 : 0x20;
+		reg12_19[5] = mode ? 0x24 : 0x20;
 		break;
 	case SENSOR_TAS5130CXX:
 		/* probably not mode specific at all most likely the upper
 		   nibble of 0x19 is exposure (clock divider) just as with
 		   the tas5110, we need someone to test this. */
-		reg17_19[2] = mode ? 0x23 : 0x43;
+		reg12_19[7] = mode ? 0x23 : 0x43;
 		break;
 	}
 	/* Disable compression when the raw bayer format has been selected */
-	if (gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv & MODE_RAW)
-		reg17_19[1] &= ~0x80;
+	if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_RAW)
+		reg12_19[6] &= ~0x80;
+
+	/* Vga mode emulation on SIF sensor? */
+	if (cam->cam_mode[gspca_dev->curr_mode].priv & MODE_REDUCED_SIF) {
+		reg12_19[0] += 16; /* 0x12: hstart adjust */
+		reg12_19[1] += 24; /* 0x13: vstart adjust */
+		reg12_19[3] = 320 / 16; /* 0x15: hsize */
+		reg12_19[4] = 240 / 16; /* 0x16: vsize */
+	}
 
 	/* reg 0x01 bit 2 video transfert on */
 	reg_w(gspca_dev, 0x01, &sn9c10x[0x01 - 1], 1);
@@ -907,24 +945,24 @@ static void sd_start(struct gspca_dev *gspca_dev)
 				sd->bridge]);
 
 	/* H_size V_size 0x28, 0x1e -> 640x480. 0x16, 0x12 -> 352x288 */
-	reg_w(gspca_dev, 0x15, &sn9c10x[0x15 - 1], 2);
+	reg_w(gspca_dev, 0x15, &reg12_19[3], 2);
 	/* compression register */
-	reg_w(gspca_dev, 0x18, &reg17_19[1], 1);
+	reg_w(gspca_dev, 0x18, &reg12_19[6], 1);
 	/* H_start */
-	reg_w(gspca_dev, 0x12, &sn9c10x[0x12 - 1], 1);
+	reg_w(gspca_dev, 0x12, &reg12_19[0], 1);
 	/* V_START */
-	reg_w(gspca_dev, 0x13, &sn9c10x[0x13 - 1], 1);
+	reg_w(gspca_dev, 0x13, &reg12_19[1], 1);
 	/* reset 0x17 SensorClk enable inv Clk 0x60 */
 				/*fixme: ov7630 [17]=68 8f (+20 if 102)*/
-	reg_w(gspca_dev, 0x17, &reg17_19[0], 1);
+	reg_w(gspca_dev, 0x17, &reg12_19[5], 1);
 	/*MCKSIZE ->3 */	/*fixme: not ov7630*/
-	reg_w(gspca_dev, 0x19, &reg17_19[2], 1);
+	reg_w(gspca_dev, 0x19, &reg12_19[7], 1);
 	/* AE_STRX AE_STRY AE_ENDX AE_ENDY */
 	reg_w(gspca_dev, 0x1c, &sn9c10x[0x1c - 1], 4);
 	/* Enable video transfert */
 	reg_w(gspca_dev, 0x01, &sn9c10x[0], 1);
 	/* Compression */
-	reg_w(gspca_dev, 0x18, &reg17_19[1], 2);
+	reg_w(gspca_dev, 0x18, &reg12_19[6], 2);
 	msleep(20);
 
 	sd->reg11 = -1;
-- 
GitLab


From a94a508691d16420ad10572a33db4d45115b5f75 Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Thu, 4 Sep 2008 16:22:55 -0300
Subject: [PATCH 778/869] V4L/DVB (8869): gspca: Move the Sonix webcams with
 TAS5110C1B from sn9c102 to gspca.

This patch makes gspca claim the USB-ID for sn9c101/2 cams with a TAS5110C1B
sensor even if both gspca and sn9c102 are enabled, as these cams are much
better supported under gspca (and extensively tested with gspca).
It also removes an usb-id from sn9c102 for one more unsupported bridge
sensor combo.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c             | 6 +++---
 drivers/media/video/sn9c102/sn9c102_devtable.h | 4 +++-
 2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 7f67148a523..bde9ea9b980 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -1201,10 +1201,10 @@ static const struct sd_desc sd_desc = {
 
 
 static __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)}, /* TAS5110C1B */
+	{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)}, /* TAS5110C1B */
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
-	{USB_DEVICE(0x0c45, 0x6001), SB(TAS5110, 102)},
-	{USB_DEVICE(0x0c45, 0x6005), SB(TAS5110, 101)},
-	{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)},
+	{USB_DEVICE(0x0c45, 0x6007), SB(TAS5110, 101)}, /* TAS5110D */
 	{USB_DEVICE(0x0c45, 0x6009), SB(PAS106, 101)},
 	{USB_DEVICE(0x0c45, 0x600d), SB(PAS106, 101)},
 #endif
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index 85499a3e4ab..f47491432e8 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -40,8 +40,10 @@ struct sn9c102_device;
 
 static const struct usb_device_id sn9c102_id_table[] = {
 	/* SN9C101 and SN9C102 */
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6001, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6005, BRIDGE_SN9C102), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6007, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6009, BRIDGE_SN9C102), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x600d, BRIDGE_SN9C102), },
@@ -72,7 +74,7 @@ static const struct usb_device_id sn9c102_id_table[] = {
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), },
 /*	{ SN9C102_USB_DEVICE(0x0c45, 0x60a8, BRIDGE_SN9C103), }, PAS106 */
 /*	{ SN9C102_USB_DEVICE(0x0c45, 0x60aa, BRIDGE_SN9C103), }, TAS5130 */
-	{ SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), },
+/*	{ SN9C102_USB_DEVICE(0x0c45, 0x60ab, BRIDGE_SN9C103), }, TAS5130 */
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), },
-- 
GitLab


From bf2a2202f75cda679303f09d150f9549f9835953 Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Thu, 4 Sep 2008 16:22:56 -0300
Subject: [PATCH 779/869] V4L/DVB (8870): gspca: Fix dark room problem with
 sonixb.

When using the sonixb driver in a dark room and given that the autoexposure
algorithm starts with a setting most suitable for daylight, the picture
produced by the cam may actually be 100% black leading to a avg_lum value of 0,
so an avg_lum value of 0 does not always signal an exposure settings change
(which it normally does). This patch adds a check for the really black image
case and stops dropping all frames as invalid in this case.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index bde9ea9b980..64bc758fbae 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -52,6 +52,7 @@ MODULE_LICENSE("GPL");
 struct sd {
 	struct gspca_dev gspca_dev;	/* !! must be the first item */
 	atomic_t avg_lum;
+	int prev_avg_lum;
 
 	unsigned char gain;
 	unsigned char exposure;
@@ -1022,10 +1023,19 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 				} else {
 					lum = data[i + 8] + (data[i + 9] << 8);
 				}
-				if (lum == 0) {
+				/* When exposure changes midway a frame we
+				   get a lum of 0 in this case drop 2 frames
+				   as the frames directly after an exposure
+				   change have an unstable image. Sometimes lum
+				   *really* is 0 (cam used in low light with
+				   low exposure setting), so do not drop frames
+				   if the previous lum was 0 too. */
+				if (lum == 0 && sd->prev_avg_lum != 0) {
 					lum = -1;
 					sd->frames_to_drop = 2;
-				}
+					sd->prev_avg_lum = 0;
+				} else
+					sd->prev_avg_lum = lum;
 				atomic_set(&sd->avg_lum, lum);
 
 				if (sd->frames_to_drop) {
-- 
GitLab


From b77c0046a63e7aa87152f9978cf7c46e7bead7fc Mon Sep 17 00:00:00 2001
From: Jean-Francois Moine <moinejf@free.fr>
Date: Thu, 4 Sep 2008 16:22:56 -0300
Subject: [PATCH 780/869] V4L/DVB (8872): gspca: Bad image format and offset
 with rev072a of spca561.

- have 2 pixfmt tables
- offset of Bayer frames at 16 instead of 20.

Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/spca561.c | 39 +++++++++++++++++++++++++----
 1 file changed, 34 insertions(+), 5 deletions(-)

diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 2ca509daf0b..d2f689e366a 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -73,7 +73,7 @@ struct sd {
 #define AG_CNT_START 13
 };
 
-static struct v4l2_pix_format sif_mode[] = {
+static struct v4l2_pix_format sif_012a_mode[] = {
 	{160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
 		.bytesperline = 160,
 		.sizeimage = 160 * 120,
@@ -96,6 +96,29 @@ static struct v4l2_pix_format sif_mode[] = {
 		.priv = 0},
 };
 
+static struct v4l2_pix_format sif_072a_mode[] = {
+	{160, 120, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 3},
+	{176, 144, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 176,
+		.sizeimage = 176 * 144,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2},
+	{320, 240, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
+	{352, 288, V4L2_PIX_FMT_SGBRG8, V4L2_FIELD_NONE,
+		.bytesperline = 352,
+		.sizeimage = 352 * 288,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0},
+};
+
 /*
  * Initialization data
  * I'm not very sure how to split initialization from open data
@@ -546,10 +569,15 @@ static int sd_config(struct gspca_dev *gspca_dev,
 	cam = &gspca_dev->cam;
 	cam->epaddr = 0x01;
 	gspca_dev->nbalt = 7 + 1;	/* choose alternate 7 first */
-	cam->cam_mode = sif_mode;
-	cam->nmodes = ARRAY_SIZE(sif_mode);
 
 	sd->chip_revision = id->driver_info;
+	if (sd->chip_revision == Rev012A) {
+		cam->cam_mode = sif_012a_mode;
+		cam->nmodes = ARRAY_SIZE(sif_012a_mode);
+	} else {
+		cam->cam_mode = sif_072a_mode;
+		cam->nmodes = ARRAY_SIZE(sif_072a_mode);
+	}
 	sd->brightness = BRIGHTNESS_DEF;
 	sd->contrast = CONTRAST_DEF;
 	sd->white = WHITE_DEF;
@@ -833,8 +861,9 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 					frame, data, len);
 		} else {
 			/* raw bayer (with a header, which we skip) */
-			data += 20;
-			len -= 20;
+/*fixme: is this specific to the rev012a? */
+			data += 16;
+			len -= 16;
 			gspca_frame_add(gspca_dev, FIRST_PACKET,
 						frame, data, len);
 		}
-- 
GitLab


From 0fc23d20699a6a3b7e34b3be2cc5e60317ba7849 Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Thu, 4 Sep 2008 16:22:57 -0300
Subject: [PATCH 781/869] V4L/DVB (8873): gspca: Bad image offset with rev012a
 of spca561 and adjust exposure.

-Make raw bayer header size change from 20 to 16 affect rev072a only, my 2
 rev012a cams both have a header size of 20
-While testing this I also tested the new exposure setting (good work on
 finding the register JF), and after quite a bit of testing have found out the
 exact meaning of the register, this patch modifies setexposure to control
 the exposure over a much wider range.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/spca561.c | 55 +++++++++++++++++++----------
 1 file changed, 36 insertions(+), 19 deletions(-)

diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index d2f689e366a..1c29c279a98 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -38,9 +38,9 @@ struct sd {
 #define CONTRAST_MAX 0x3fff
 
 	__u16 exposure;			/* rev12a only */
-#define EXPOSURE_MIN 0
+#define EXPOSURE_MIN 1
 #define EXPOSURE_DEF 200
-#define EXPOSURE_MAX 762
+#define EXPOSURE_MAX (4095 - 900) /* see set_exposure */
 
 	__u8 brightness;		/* rev72a only */
 #define BRIGHTNESS_MIN 0
@@ -648,9 +648,31 @@ static void setexposure(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 	int expo;
+	int clock_divider;
 	__u8 data[2];
 
-	expo = sd->exposure + 0x20a8;	/* from test */
+	/* Register 0x8309 controls exposure for the spca561,
+	   the basic exposure setting goes from 1-2047, where 1 is completely
+	   dark and 2047 is very bright. It not only influences exposure but
+	   also the framerate (to allow for longer exposure) from 1 - 300 it
+	   only raises the exposure time then from 300 - 600 it halves the
+	   framerate to be able to further raise the exposure time and for every
+	   300 more it halves the framerate again. This allows for a maximum
+	   exposure time of circa 0.2 - 0.25 seconds (30 / (2000/3000) fps).
+	   Sometimes this is not enough, the 1-2047 uses bits 0-10, bits 11-12
+	   configure a divider for the base framerate which us used at the
+	   exposure setting of 1-300. These bits configure the base framerate
+	   according to the following formula: fps = 60 / (value + 2) */
+	if (sd->exposure < 2048) {
+		expo = sd->exposure;
+		clock_divider = 0;
+	} else {
+		/* Add 900 to make the 0 setting of the second part of the
+		   exposure equal to the 2047 setting of the first part. */
+		expo = (sd->exposure - 2048) + 900;
+		clock_divider = 3;
+	}
+	expo |= clock_divider << 11;
 	data[0] = expo;
 	data[1] = expo >> 8;
 	reg_w_buf(gspca_dev, 0x8309, data, 2);
@@ -680,23 +702,11 @@ static void setautogain(struct gspca_dev *gspca_dev)
 static void sd_start_12a(struct gspca_dev *gspca_dev)
 {
 	struct usb_device *dev = gspca_dev->dev;
-	int Clck;
+	int Clck = 0x8a; /* lower 0x8X values lead to fps > 30 */
 	__u8 Reg8307[] = { 0xaa, 0x00 };
 	int mode;
 
 	mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
-	switch (mode) {
-	case 0:
-	case 1:
-		Clck = 0x8a;
-		break;
-	case 2:
-		Clck = 0x85;
-		break;
-	default:
-		Clck = 0x83;
-		break;
-	}
 	if (mode <= 1) {
 		/* Use compression on 320x240 and above */
 		reg_w_val(dev, 0x8500, 0x10 | mode);
@@ -714,6 +724,7 @@ static void sd_start_12a(struct gspca_dev *gspca_dev)
 	setcontrast(gspca_dev);
 	setwhite(gspca_dev);
 	setautogain(gspca_dev);
+	setexposure(gspca_dev);
 }
 static void sd_start_72a(struct gspca_dev *gspca_dev)
 {
@@ -849,6 +860,8 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 			__u8 *data,		/* isoc packet */
 			int len)		/* iso packet length */
 {
+	struct sd *sd = (struct sd *) gspca_dev;
+
 	switch (data[0]) {
 	case 0:		/* start of frame */
 		frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame,
@@ -861,9 +874,13 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev,
 					frame, data, len);
 		} else {
 			/* raw bayer (with a header, which we skip) */
-/*fixme: is this specific to the rev012a? */
-			data += 16;
-			len -= 16;
+			if (sd->chip_revision == Rev012A) {
+				data += 20;
+				len -= 20;
+			} else {
+				data += 16;
+				len -= 16;
+			}
 			gspca_frame_add(gspca_dev, FIRST_PACKET,
 						frame, data, len);
 		}
-- 
GitLab


From 4cce1655b26a4df1e619b2aa3d2eea1b7a6e906c Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Thu, 4 Sep 2008 16:22:57 -0300
Subject: [PATCH 782/869] V4L/DVB (8874): gspca: Adjust hstart for
 sn9c103/ov7630 and update usb-id's.

- Adjust hstart in ov7630 on sn9c103 initdata to shift bayer pattern, this is
 the same change as done for the other initdata tables in a previous patch.
- Assign usb-id's for the ov7630 + sn9c103 to gspca if gspca and sn9c102
  drivers are both enabled.

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/sonixb.c             | 6 ++++--
 drivers/media/video/sn9c102/sn9c102_devtable.h | 4 ++++
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 64bc758fbae..5dd78c6766e 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -348,7 +348,7 @@ static const __u8 initOv7630[] = {
 static const __u8 initOv7630_3[] = {
 	0x44, 0x44, 0x00, 0x1a, 0x20, 0x20, 0x20, 0x80,	/* r01 .. r08 */
 	0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04,	/* r09 .. r10 */
-	0x00, 0x01, 0x01, 0x0a,				/* r11 .. r14 */
+	0x00, 0x02, 0x01, 0x0a,				/* r11 .. r14 */
 	0x28, 0x1e,			/* H & V sizes     r15 .. r16 */
 	0x68, 0x8f, MCK_INIT1,				/* r17 .. r19 */
 	0x1d, 0x10, 0x02, 0x03, 0x0f, 0x0c, 0x00,	/* r1a .. r20 */
@@ -1230,10 +1230,12 @@ static __devinitdata struct usb_device_id device_table[] = {
 	{USB_DEVICE(0x0c45, 0x602d), SB(HV7131R, 102)},
 #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x602e), SB(OV7630, 102)},
+#endif
 	{USB_DEVICE(0x0c45, 0x608f), SB(OV7630, 103)},
+#if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE
 	{USB_DEVICE(0x0c45, 0x60af), SB(PAS202, 103)},
-	{USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)},
 #endif
+	{USB_DEVICE(0x0c45, 0x60b0), SB(OV7630, 103)},
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
diff --git a/drivers/media/video/sn9c102/sn9c102_devtable.h b/drivers/media/video/sn9c102/sn9c102_devtable.h
index f47491432e8..90a401dc388 100644
--- a/drivers/media/video/sn9c102/sn9c102_devtable.h
+++ b/drivers/media/video/sn9c102/sn9c102_devtable.h
@@ -68,7 +68,9 @@ static const struct usb_device_id sn9c102_id_table[] = {
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608b, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608c, BRIDGE_SN9C103), },
 /*	{ SN9C102_USB_DEVICE(0x0c45, 0x608e, BRIDGE_SN9C103), }, CISVF10 */
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x608f, BRIDGE_SN9C103), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a0, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a2, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60a3, BRIDGE_SN9C103), },
@@ -78,7 +80,9 @@ static const struct usb_device_id sn9c102_id_table[] = {
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ac, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ae, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60af, BRIDGE_SN9C103), },
+#if !defined CONFIG_USB_GSPCA && !defined CONFIG_USB_GSPCA_MODULE
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60b0, BRIDGE_SN9C103), },
+#endif
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60b2, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60b3, BRIDGE_SN9C103), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60b8, BRIDGE_SN9C103), },
-- 
GitLab


From 65846909d684d75906269df4f5f3474e1fef568b Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Wed, 3 Sep 2008 23:46:18 +0100
Subject: [PATCH 783/869] [ARM] omap: fix virtual vs physical address space
 confusions

mcbsp is confused as to what takes a physical or virtual address.
Fix the two instances where it gets it wrong.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/mach-omap1/mcbsp.c             | 8 ++++++++
 arch/arm/mach-omap2/mcbsp.c             | 4 ++++
 arch/arm/plat-omap/include/mach/mcbsp.h | 2 ++
 arch/arm/plat-omap/mcbsp.c              | 5 +++--
 4 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 826010d5d01..2baeaeb0c90 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -159,6 +159,7 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 #ifdef CONFIG_ARCH_OMAP730
 static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP730_MCBSP1_BASE,
 		.virt_base	= io_p2v(OMAP730_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -167,6 +168,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP730_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP730_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
@@ -184,6 +186,7 @@ static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP1510_MCBSP1_BASE,
 		.virt_base	= OMAP1510_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -193,6 +196,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 		},
 	{
+		.phys_base	= OMAP1510_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP1510_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
@@ -201,6 +205,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP1510_MCBSP3_BASE,
 		.virt_base	= OMAP1510_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
@@ -219,6 +224,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP1610_MCBSP1_BASE,
 		.virt_base	= OMAP1610_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
@@ -228,6 +234,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP1610_MCBSP2_BASE,
 		.virt_base	= io_p2v(OMAP1610_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP2_TX,
@@ -236,6 +243,7 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
+		.phys_base	= OMAP1610_MCBSP3_BASE,
 		.virt_base	= OMAP1610_MCBSP3_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 27eb6e3ca92..b261f1f80b5 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -134,6 +134,7 @@ static struct omap_mcbsp_ops omap2_mcbsp_ops = {
 #ifdef CONFIG_ARCH_OMAP24XX
 static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP24XX_MCBSP1_BASE,
 		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
@@ -143,6 +144,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP24XX_MCBSP2_BASE,
 		.virt_base	= IO_ADDRESS(OMAP24XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
@@ -161,6 +163,7 @@ static struct omap_mcbsp_platform_data omap24xx_mcbsp_pdata[] = {
 #ifdef CONFIG_ARCH_OMAP34XX
 static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 	{
+		.phys_base	= OMAP34XX_MCBSP1_BASE,
 		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP1_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP1_TX,
@@ -170,6 +173,7 @@ static struct omap_mcbsp_platform_data omap34xx_mcbsp_pdata[] = {
 		.clk_name	= "mcbsp_clk",
 	},
 	{
+		.phys_base	= OMAP34XX_MCBSP2_BASE,
 		.virt_base	= IO_ADDRESS(OMAP34XX_MCBSP2_BASE),
 		.dma_rx_sync	= OMAP24XX_DMA_MCBSP2_RX,
 		.dma_tx_sync	= OMAP24XX_DMA_MCBSP2_TX,
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
index 6eb44a92871..8fdb95e26fc 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -315,6 +315,7 @@ struct omap_mcbsp_ops {
 };
 
 struct omap_mcbsp_platform_data {
+	unsigned long phys_base;
 	u32 virt_base;
 	u8 dma_rx_sync, dma_tx_sync;
 	u16 rx_irq, tx_irq;
@@ -324,6 +325,7 @@ struct omap_mcbsp_platform_data {
 
 struct omap_mcbsp {
 	struct device *dev;
+	unsigned long phys_base;
 	u32 io_base;
 	u8 id;
 	u8 free;
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index d0844050f2d..014d26574bb 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -651,7 +651,7 @@ int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer,
 	omap_set_dma_dest_params(mcbsp[id].dma_tx_lch,
 				 src_port,
 				 OMAP_DMA_AMODE_CONSTANT,
-				 mcbsp[id].io_base + OMAP_MCBSP_REG_DXR1,
+				 mcbsp[id].phys_base + OMAP_MCBSP_REG_DXR1,
 				 0, 0);
 
 	omap_set_dma_src_params(mcbsp[id].dma_tx_lch,
@@ -712,7 +712,7 @@ int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer,
 	omap_set_dma_src_params(mcbsp[id].dma_rx_lch,
 				src_port,
 				OMAP_DMA_AMODE_CONSTANT,
-				mcbsp[id].io_base + OMAP_MCBSP_REG_DRR1,
+				mcbsp[id].phys_base + OMAP_MCBSP_REG_DRR1,
 				0, 0);
 
 	omap_set_dma_dest_params(mcbsp[id].dma_rx_lch,
@@ -830,6 +830,7 @@ static int __init omap_mcbsp_probe(struct platform_device *pdev)
 	mcbsp[id].dma_tx_lch = -1;
 	mcbsp[id].dma_rx_lch = -1;
 
+	mcbsp[id].phys_base = pdata->phys_base;
 	mcbsp[id].io_base = pdata->virt_base;
 	/* Default I/O is IRQ based */
 	mcbsp[id].io_type = OMAP_MCBSP_IRQ_IO;
-- 
GitLab


From db210426d48998ed412f267b28cf6e62ea0496a8 Mon Sep 17 00:00:00 2001
From: Thierry MERLE <thierry.merle@free.fr>
Date: Mon, 1 Sep 2008 17:28:57 -0300
Subject: [PATCH 784/869] V4L/DVB (8876): budget: udelay changed to mdelay

budget.ko fails to build on ARM with:

ERROR: "__bad_udelay" [drivers/media/dvb/ttpci/budget.ko] undefined!
make[1]: *** [__modpost] Error 1

__bad_udelay is specifically designed on ARM to fail when udelay is
called in a bad way.  arch/arm/include/asm/delay.h has this to say
about __bad_udelay:

/*
 * This function intentionally does not exist; if you see references to
 * it, it means that you're calling udelay() with an out of range value.
 *
 * With currently imposed limits, this means that we support a max delay
 * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
 */
extern void __bad_udelay(void);

Solution is to replace udelay by a mdelay and udelay with value less than 2000

Acked-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/ttpci/budget-patch.c | 3 ++-
 drivers/media/dvb/ttpci/budget.c       | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 39bd0a20f53..aa5ed4ef19f 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -116,7 +116,8 @@ static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long
 			DiseqcSendByte(budget, 0xff);
 		else {
 			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-			udelay(12500);
+			mdelay(12);
+			udelay(500);
 			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
 		}
 		msleep(20);
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 2293d80c6e5..f0068996ac0 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -108,7 +108,8 @@ static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long
 			DiseqcSendByte(budget, 0xff);
 		else {
 			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
-			udelay(12500);
+			mdelay(12);
+			udelay(500);
 			saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
 		}
 		msleep(20);
-- 
GitLab


From c4e3fd940c7081a0332e9b4ea6485744075067b0 Mon Sep 17 00:00:00 2001
From: Thierry MERLE <thierry.merle@free.fr>
Date: Mon, 1 Sep 2008 17:32:10 -0300
Subject: [PATCH 785/869] V4L/DVB (8877): b2c2 and bt8xx: udelay to mdelay

b2c2-flexcop, dvb/bt8xx and video/bt8xx fails to build on ARM with:

__bad_udelay is specifically designed on ARM to fail when udelay is
called in a bad way.  arch/arm/include/asm/delay.h has this to say
about __bad_udelay:

/*
 * This function intentionally does not exist; if you see references to
 * it, it means that you're calling udelay() with an out of range value.
 *
 * With currently imposed limits, this means that we support a max delay
 * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
 */
extern void __bad_udelay(void);

Solution is to replace udelay by a mdelay and udelay with value less than 2000

Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 3 ++-
 drivers/media/dvb/bt8xx/dst.c             | 4 ++--
 drivers/media/video/bt8xx/bttv-cards.c    | 3 ++-
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index f9d087669d5..4eed783f4bc 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -137,7 +137,8 @@ static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, un
 			flexcop_diseqc_send_byte(fe, 0xff);
 		else {
 			flexcop_set_tone(fe, SEC_TONE_ON);
-			udelay(12500);
+			mdelay(12);
+			udelay(500);
 			flexcop_set_tone(fe, SEC_TONE_OFF);
 		}
 		msleep(20);
diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c
index a7637562e74..aa3db57d32d 100644
--- a/drivers/media/dvb/bt8xx/dst.c
+++ b/drivers/media/dvb/bt8xx/dst.c
@@ -1244,7 +1244,7 @@ static int dst_command(struct dst_state *state, u8 *data, u8 len)
 		goto error;
 	}
 	if (state->type_flags & DST_TYPE_HAS_FW_1)
-		udelay(3000);
+		mdelay(3);
 	if (read_dst(state, &reply, GET_ACK)) {
 		dprintk(verbose, DST_DEBUG, 1, "Trying to recover.. ");
 		if ((dst_error_recovery(state)) < 0) {
@@ -1260,7 +1260,7 @@ static int dst_command(struct dst_state *state, u8 *data, u8 len)
 	if (len >= 2 && data[0] == 0 && (data[1] == 1 || data[1] == 3))
 		goto error;
 	if (state->type_flags & DST_TYPE_HAS_FW_1)
-		udelay(3000);
+		mdelay(3);
 	else
 		udelay(2000);
 	if (!dst_wait_dst_ready(state, NO_DELAY))
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 9001de23332..6081edc362d 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -4039,7 +4039,8 @@ static void __devinit boot_msp34xx(struct bttv *btv, int pin)
 
 	gpio_inout(mask,mask);
 	gpio_bits(mask,0);
-	udelay(2500);
+	mdelay(2);
+	udelay(500);
 	gpio_bits(mask,mask);
 
 	if (bttv_gpio)
-- 
GitLab


From 748c7f80acc266a54ade4d6863229402fd3cd363 Mon Sep 17 00:00:00 2001
From: Hans de Goede <j.w.r.degoede@hhs.nl>
Date: Mon, 1 Sep 2008 15:28:23 -0300
Subject: [PATCH 786/869] V4L/DVB (8880): PATCH: Fix parents on some webcam
 drivers

While doing some testing using Luca Risolia's sonix driver I noticed that
the video device did not get ACL's set to allow access by locally logged in
users, nor does it show up as a video device in lshal, causing cheese to not
see it.

This turns out to be caused by all of Luca Risolia's drivers not setting
the parent member of the video_device struct. This patch fixes this.

Cc: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/et61x251/et61x251_core.c | 1 +
 drivers/media/video/sn9c102/sn9c102_core.c   | 1 +
 drivers/media/video/zc0301/zc0301_core.c     | 1 +
 3 files changed, 3 insertions(+)

diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 2d170d101c2..8db2a05bf9c 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -2588,6 +2588,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	cam->v4ldev->fops = &et61x251_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
+	cam->v4ldev->parent = &udev->dev;
 	video_set_drvdata(cam->v4ldev, cam);
 
 	init_completion(&cam->probe);
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 23408764d0e..2da6938718f 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -3312,6 +3312,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	cam->v4ldev->fops = &sn9c102_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
+	cam->v4ldev->parent = &udev->dev;
 
 	init_completion(&cam->probe);
 
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index 550ce7bd5c8..0c3287734c9 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -1988,6 +1988,7 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id)
 	cam->v4ldev->fops = &zc0301_fops;
 	cam->v4ldev->minor = video_nr[dev_nr];
 	cam->v4ldev->release = video_device_release;
+	cam->v4ldev->parent = &udev->dev;
 	video_set_drvdata(cam->v4ldev, cam);
 
 	init_completion(&cam->probe);
-- 
GitLab


From 8561098ff11d21f1a6a9a01fae2e68653928dbb5 Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Tue, 2 Sep 2008 07:02:50 -0300
Subject: [PATCH 787/869] V4L/DVB (8881): gspca: After 'while (retry--) {...}',
 retry will be -1 but not 0.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Jean-Francois Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
---
 drivers/media/video/gspca/conex.c   | 4 ++--
 drivers/media/video/gspca/spca561.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 8c91ffde953..4d9f4cc255a 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -731,13 +731,13 @@ static void cx11646_jpeg(struct gspca_dev*gspca_dev)
 	reg_w_val(gspca_dev, 0x0000, 0x00);
 	/* wait for completion */
 	retry = 50;
-	while (retry--) {
+	do {
 		reg_r(gspca_dev, 0x0002, 1);
 							/* 0x07 until 0x00 */
 		if (gspca_dev->usb_buf[0] == 0x00)
 			break;
 		reg_w_val(gspca_dev, 0x0053, 0x00);
-	}
+	} while (--retry);
 	if (retry == 0)
 		PDEBUG(D_ERR, "Damned Errors sending jpeg Table");
 	/* send the qtable now */
diff --git a/drivers/media/video/gspca/spca561.c b/drivers/media/video/gspca/spca561.c
index 1c29c279a98..cfbc9ebc5c5 100644
--- a/drivers/media/video/gspca/spca561.c
+++ b/drivers/media/video/gspca/spca561.c
@@ -223,11 +223,11 @@ static int i2c_read(struct gspca_dev *gspca_dev, __u16 reg, __u8 mode)
 	reg_w_val(gspca_dev->dev, 0x8804, 0x92);
 	reg_w_val(gspca_dev->dev, 0x8801, reg);
 	reg_w_val(gspca_dev->dev, 0x8802, (mode | 0x01));
-	while (retry--) {
+	do {
 		reg_r(gspca_dev, 0x8803, 1);
 		if (!gspca_dev->usb_buf)
 			break;
-	}
+	} while (--retry);
 	if (retry == 0)
 		return -1;
 	reg_r(gspca_dev, 0x8800, 1);
-- 
GitLab


From 9f43e3914dceb0f8191875b3cdf4325b48d0d70a Mon Sep 17 00:00:00 2001
From: Jeremy Kerr <jk@ozlabs.org>
Date: Tue, 2 Sep 2008 11:57:09 +1000
Subject: [PATCH 788/869] powerpc/spufs: Fix multiple get_spu_context()

Commit 8d5636fbca202f61fdb808fc9e20c0142291d802 introduced a reference
count on SPU contexts during find_victim, but this may cause a leak in
the reference count if we later find a better contender for a context to
unschedule.

Change the reference to after we've found our victim context, so we
don't do the extra get_spu_context().

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/sched.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 1c1b627ee84..9bb45c6b839 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -643,9 +643,10 @@ static struct spu *find_victim(struct spu_context *ctx)
 			    !(tmp->flags & SPU_CREATE_NOSCHED) &&
 			    (!victim || tmp->prio > victim->prio)) {
 				victim = spu->ctx;
-				get_spu_context(victim);
 			}
 		}
+		if (victim)
+			get_spu_context(victim);
 		mutex_unlock(&cbe_spu_info[node].list_mutex);
 
 		if (victim) {
-- 
GitLab


From b65fe0356b5b732d7e1e0224c6a1cf2eb5255984 Mon Sep 17 00:00:00 2001
From: Jeremy Kerr <jk@ozlabs.org>
Date: Thu, 4 Sep 2008 15:02:47 +1000
Subject: [PATCH 789/869] powerpc/spufs: Fix race for a free SPU

We currently have a race for a free SPE. With one thread doing a
spu_yield(), and another doing a spu_activate():

thread 1				thread 2
spu_yield(oldctx)			spu_activate(ctx)
  __spu_deactivate(oldctx)
  spu_unschedule(oldctx, spu)
  spu->alloc_state = SPU_FREE
					spu = spu_get_idle(ctx)
					    - searches for a SPE in
					      state SPU_FREE, gets
					      the context just
					      freed by thread 1
					spu_schedule(ctx, spu)
					  spu->alloc_state = SPU_USED
spu_schedule(newctx, spu)
  - assumes spu is still free
  - tries to schedule context on
    already-used spu

This change introduces a 'free_spu' flag to spu_unschedule, to indicate
whether or not the function should free the spu after descheduling the
context. We only set this flag if we're not going to re-schedule
another context on this SPU.

Add a comment to document this behaviour.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/sched.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 9bb45c6b839..897c7406116 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -732,13 +732,28 @@ static void spu_schedule(struct spu *spu, struct spu_context *ctx)
 	spu_release(ctx);
 }
 
-static void spu_unschedule(struct spu *spu, struct spu_context *ctx)
+/**
+ * spu_unschedule - remove a context from a spu, and possibly release it.
+ * @spu:	The SPU to unschedule from
+ * @ctx:	The context currently scheduled on the SPU
+ * @free_spu	Whether to free the SPU for other contexts
+ *
+ * Unbinds the context @ctx from the SPU @spu. If @free_spu is non-zero, the
+ * SPU is made available for other contexts (ie, may be returned by
+ * spu_get_idle). If this is zero, the caller is expected to schedule another
+ * context to this spu.
+ *
+ * Should be called with ctx->state_mutex held.
+ */
+static void spu_unschedule(struct spu *spu, struct spu_context *ctx,
+		int free_spu)
 {
 	int node = spu->node;
 
 	mutex_lock(&cbe_spu_info[node].list_mutex);
 	cbe_spu_info[node].nr_active--;
-	spu->alloc_state = SPU_FREE;
+	if (free_spu)
+		spu->alloc_state = SPU_FREE;
 	spu_unbind_context(spu, ctx);
 	ctx->stats.invol_ctx_switch++;
 	spu->stats.invol_ctx_switch++;
@@ -838,7 +853,7 @@ static int __spu_deactivate(struct spu_context *ctx, int force, int max_prio)
 	if (spu) {
 		new = grab_runnable_context(max_prio, spu->node);
 		if (new || force) {
-			spu_unschedule(spu, ctx);
+			spu_unschedule(spu, ctx, new == NULL);
 			if (new) {
 				if (new->flags & SPU_CREATE_NOSCHED)
 					wake_up(&new->stop_wq);
@@ -911,7 +926,7 @@ static noinline void spusched_tick(struct spu_context *ctx)
 
 	new = grab_runnable_context(ctx->prio + 1, spu->node);
 	if (new) {
-		spu_unschedule(spu, ctx);
+		spu_unschedule(spu, ctx, 0);
 		if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
 			spu_add_to_rq(ctx);
 	} else {
-- 
GitLab


From 158e0fb6028a2329425d8287b1b2402a12ed4f28 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Thu, 4 Sep 2008 22:20:10 -0400
Subject: [PATCH 790/869] Input: bcm5974 - small formatting cleanup

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/bcm5974.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 2ec921bf3c6..ae78bb833f6 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -63,7 +63,7 @@
 }
 
 /* table of devices that work with this driver */
-static const struct usb_device_id bcm5974_table [] = {
+static const struct usb_device_id bcm5974_table[] = {
 	/* MacbookAir1.1 */
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO),
-- 
GitLab


From 75e21e3f3bb2b4a41bb0646a4d54eef27eb36ca5 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Thu, 4 Sep 2008 22:28:23 -0400
Subject: [PATCH 791/869] Input: bcm5974 - improve finger tracking and counting

The problem of finger tracking, i.e., when to switch focus from one
finger to another on the trackpad, has been improved by utilizing more
information from the bcm5974 chip output. This results in less pointer
hopping when many fingers are on the trackpad. In addition, a finger
counting method based on pressure information from all fingers is
introduced. Together with a pressure hysteresis window, this yields a
more stable counting of the number of fingers on the trackpad.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/bcm5974.c | 70 +++++++++++++++++++++++++++--------
 1 file changed, 54 insertions(+), 16 deletions(-)

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index ae78bb833f6..8568211c556 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -105,7 +105,7 @@ struct tp_header {
 
 /* trackpad finger structure */
 struct tp_finger {
-	__le16 origin;		/* left/right origin? */
+	__le16 origin;		/* zero when switching track finger */
 	__le16 abs_x;		/* absolute x coodinate */
 	__le16 abs_y;		/* absolute y coodinate */
 	__le16 rel_x;		/* relative x coodinate */
@@ -159,6 +159,7 @@ struct bcm5974 {
 	struct bt_data *bt_data;	/* button transferred data */
 	struct urb *tp_urb;		/* trackpad usb request block */
 	struct tp_data *tp_data;	/* trackpad transferred data */
+	int fingers;			/* number of fingers on trackpad */
 };
 
 /* logical dimensions */
@@ -172,6 +173,10 @@ struct bcm5974 {
 #define SN_WIDTH	100		/* width signal-to-noise ratio */
 #define SN_COORD	250		/* coordinate signal-to-noise ratio */
 
+/* pressure thresholds */
+#define PRESSURE_LOW	(2 * DIM_PRESSURE / SN_PRESSURE)
+#define PRESSURE_HIGH	(3 * PRESSURE_LOW)
+
 /* device constants */
 static const struct bcm5974_config bcm5974_config_table[] = {
 	{
@@ -273,32 +278,65 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 	const struct tp_finger *f = dev->tp_data->finger;
 	struct input_dev *input = dev->input;
 	const int fingers = (size - 26) / 28;
-	int p = 0, w, x, y, n = 0;
+	int raw_p, raw_w, raw_x, raw_y;
+	int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+	int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
 
 	if (size < 26 || (size - 26) % 28 != 0)
 		return -EIO;
 
+	/* always track the first finger; when detached, start over */
 	if (fingers) {
-		p = raw2int(f->force_major);
-		w = raw2int(f->size_major);
-		x = raw2int(f->abs_x);
-		y = raw2int(f->abs_y);
-		n = p > 0 ? fingers : 0;
+		raw_p = raw2int(f->force_major);
+		raw_w = raw2int(f->size_major);
+		raw_x = raw2int(f->abs_x);
+		raw_y = raw2int(f->abs_y);
 
 		dprintk(9,
-			"bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
-			p, w, x, y, n);
+			"bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
+			raw_p, raw_w, raw_x, raw_y);
+
+		ptest = int2bound(&c->p, raw_p);
+		origin = raw2int(f->origin);
+	}
 
-		input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w));
-		input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin));
-		input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y));
+	/* while tracking finger still valid, count all fingers */
+	if (ptest > PRESSURE_LOW && origin) {
+		abs_p = ptest;
+		abs_w = int2bound(&c->w, raw_w);
+		abs_x = int2bound(&c->x, raw_x - c->x.devmin);
+		abs_y = int2bound(&c->y, c->y.devmax - raw_y);
+		for (; f != dev->tp_data->finger + fingers; f++) {
+			ptest = int2bound(&c->p, raw2int(f->force_major));
+			if (ptest > PRESSURE_LOW)
+				nmax++;
+			if (ptest > PRESSURE_HIGH)
+				nmin++;
+		}
 	}
 
-	input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p));
+	if (dev->fingers < nmin)
+		dev->fingers = nmin;
+	if (dev->fingers > nmax)
+		dev->fingers = nmax;
+
+	input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
+	input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
+	input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
 
-	input_report_key(input, BTN_TOOL_FINGER, n == 1);
-	input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2);
-	input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2);
+	input_report_abs(input, ABS_PRESSURE, abs_p);
+	input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
+
+	if (abs_p) {
+		input_report_abs(input, ABS_X, abs_x);
+		input_report_abs(input, ABS_Y, abs_y);
+
+		dprintk(8,
+			"bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
+			"nmin: %d nmax: %d n: %d\n",
+			abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+
+	}
 
 	input_sync(input);
 
-- 
GitLab


From a6821f345fd508b17f5ce310b677b37aefb028dc Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Thu, 4 Sep 2008 22:28:31 -0400
Subject: [PATCH 792/869] Input: bcm5974 - add BTN_TOUCH event for mousedev
 benefit

The mousedev driver requires the use of BTN_TOUCH events to process
ABS_X and ABS_Y events properly, which is what is needed for the
bcm5974-based apple computers to have a functional pointer out-of-the-box.

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/bcm5974.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 8568211c556..18f4d7f6ce6 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -253,6 +253,7 @@ static void setup_events_to_report(struct input_dev *input_dev,
 				0, cfg->y.dim, cfg->y.fuzz, 0);
 
 	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
 	__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
 	__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
 	__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
@@ -320,6 +321,7 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 	if (dev->fingers > nmax)
 		dev->fingers = nmax;
 
+	input_report_key(input, BTN_TOUCH, dev->fingers > 0);
 	input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
 	input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
 	input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
-- 
GitLab


From 9ce1ca284a322ba6f9d691136a29c9cfe381e1fc Mon Sep 17 00:00:00 2001
From: Jiri Kosina <jkosina@suse.cz>
Date: Thu, 4 Sep 2008 22:28:48 -0400
Subject: [PATCH 793/869] Input: i8042 - make Lenovo 3000 N100 blacklist entry
 more specific

Apparently, there are more different versions of Lenovo 3000 N100, some
of them working properly with active mux, and some of them requiring it
being switched off.

This patch applies 'nomux' only to the specific product name that is
reported to behave badly unless 'nomux' is specified.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/i8042-x86ia64io.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 3282b741e24..5aafe24984c 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -305,7 +305,7 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 		.ident = "Lenovo 3000 n100",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "3000 N100"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
 		},
 	},
 	{
-- 
GitLab


From 323b8c410a2453f15578c22b0eef50456359bbfc Mon Sep 17 00:00:00 2001
From: Carmelo Amoroso <carmelo.amoroso@st.com>
Date: Fri, 5 Sep 2008 14:42:16 +0900
Subject: [PATCH 794/869] sh: resume_kernel fix for kernel oops built with
 CONFIG_BKL_PREEMPT=y.

This patch fixes a problem within the SH implementation of resume_kernel code,
that implements in assembly the bulk of preempt_schedule_irq function without
taking care of the extra code needed to handle the BKL preemptible.

The patch basically consists of removing this asm code and calling the common
C implementation (see kernel/sched.c) as other archs do.

Another change is the missing 'cli' macro invocation at the beginning of
the resume_kernel.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Carmelo Amoroso <carmelo.amoroso@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/entry-common.S | 27 +++------------------------
 1 file changed, 3 insertions(+), 24 deletions(-)

diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 0bc17def55a..efbb4268875 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -92,6 +92,7 @@ ENTRY(ret_from_irq)
 	bra	resume_userspace
 	 nop
 ENTRY(resume_kernel)
+	cli
 	mov.l	@(TI_PRE_COUNT,r8), r0	! current_thread_info->preempt_count
 	tst	r0, r0
 	bf	noresched
@@ -105,28 +106,9 @@ need_resched:
 	and	#0xf0, r0		! interrupts off (exception path)?
 	cmp/eq	#0xf0, r0
 	bt	noresched
-
-	mov.l	1f, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-
-#ifdef CONFIG_TRACE_IRQFLAGS
 	mov.l	3f, r0
-	jsr	@r0
-	 nop
-#endif
-	sti
-	mov.l	2f, r0
-	jsr	@r0
-	 nop
-	mov	#0, r0
-	mov.l	r0, @(TI_PRE_COUNT,r8)
-	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	4f, r0
-	jsr	@r0
+	jsr	@r0			! call preempt_schedule_irq
 	 nop
-#endif
-
 	bra	need_resched
 	 nop
 
@@ -137,10 +119,7 @@ noresched:
 	.align 2
 1:	.long	PREEMPT_ACTIVE
 2:	.long	schedule
-#ifdef CONFIG_TRACE_IRQFLAGS
-3:	.long	trace_hardirqs_on
-4:	.long	trace_hardirqs_off
-#endif
+3:	.long	preempt_schedule_irq
 #endif
 
 ENTRY(resume_userspace)
-- 
GitLab


From dbce1f649e3d22aa7ddc0fdbfa6a7470047b61bd Mon Sep 17 00:00:00 2001
From: Paul Mundt <lethal@linux-sh.org>
Date: Fri, 5 Sep 2008 14:51:28 +0900
Subject: [PATCH 795/869] sh64: resume_kernel fix for kernel oops built with
 CONFIG_BKL_PREEMPT=y.

Follows the SH change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 arch/sh/kernel/cpu/sh5/entry.S | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 04c7da96814..e640c63d581 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -2,7 +2,7 @@
  * arch/sh/kernel/cpu/sh5/entry.S
  *
  * Copyright (C) 2000, 2001  Paolo Alberelli
- * Copyright (C) 2004 - 2007  Paul Mundt
+ * Copyright (C) 2004 - 2008  Paul Mundt
  * Copyright (C) 2003, 2004  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -923,6 +923,8 @@ ret_from_exception:
 	blink   tr0, ZERO
 
 resume_kernel:
+	CLI()
+
 	pta	restore_all, tr0
 
 	getcon	KCR0, r6
@@ -939,19 +941,11 @@ need_resched:
 	andi	r7, 0xf0, r7
 	bne	r7, ZERO, tr0
 
-	movi	((PREEMPT_ACTIVE >> 16) & 65535), r8
-	shori	(PREEMPT_ACTIVE & 65535), r8
-	st.l	r6, TI_PRE_COUNT, r8
-
-	STI()
-	movi	schedule, r7
+	movi	preempt_schedule_irq, r7
 	ori	r7, 1, r7
 	ptabs	r7, tr1
 	blink	tr1, LINK
 
-	st.l	r6, TI_PRE_COUNT, ZERO
-	CLI()
-
 	pta	need_resched, tr1
 	blink	tr1, ZERO
 #endif
-- 
GitLab


From 4eb00c9f92202a759aadbce73ea4a947b639b5e6 Mon Sep 17 00:00:00 2001
From: Magnus Damm <damm@igel.co.jp>
Date: Wed, 27 Aug 2008 18:33:56 +0900
Subject: [PATCH 796/869] i2c: fix i2c-sh_mobile timing issues

This patch teaches the i2c-sh_mobile driver to make use of wait irqs.
Without this patch only dte irqs are used which may lead to overruns
and cases of missing stop and extra bytes being read on the i2c bus.

Use of wait irqs forces the hardware to pause and wait until the cpu
is ready. Polling is also reworked in this patch to fix ms delay issues.

Verified with bus analyzer and tested on MigoR and AP325RXA boards.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
---
 drivers/i2c/busses/i2c-sh_mobile.c | 271 ++++++++++++++++++++++-------
 1 file changed, 208 insertions(+), 63 deletions(-)

diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 840e634fa31..640cbb23732 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -31,13 +31,84 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
+/* Transmit operation:                                                      */
+/*                                                                          */
+/* 0 byte transmit                                                          */
+/* BUS:     S     A8     ACK   P                                            */
+/* IRQ:       DTE   WAIT                                                    */
+/* ICIC:                                                                    */
+/* ICCR: 0x94 0x90                                                          */
+/* ICDR:      A8                                                            */
+/*                                                                          */
+/* 1 byte transmit                                                          */
+/* BUS:     S     A8     ACK   D8(1)   ACK   P                              */
+/* IRQ:       DTE   WAIT         WAIT                                       */
+/* ICIC:      -DTE                                                          */
+/* ICCR: 0x94       0x90                                                    */
+/* ICDR:      A8    D8(1)                                                   */
+/*                                                                          */
+/* 2 byte transmit                                                          */
+/* BUS:     S     A8     ACK   D8(1)   ACK   D8(2)   ACK   P                */
+/* IRQ:       DTE   WAIT         WAIT          WAIT                         */
+/* ICIC:      -DTE                                                          */
+/* ICCR: 0x94                    0x90                                       */
+/* ICDR:      A8    D8(1)        D8(2)                                      */
+/*                                                                          */
+/* 3 bytes or more, +---------+ gets repeated                               */
+/*                                                                          */
+/*                                                                          */
+/* Receive operation:                                                       */
+/*                                                                          */
+/* 0 byte receive - not supported since slave may hold SDA low              */
+/*                                                                          */
+/* 1 byte receive       [TX] | [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   P                              */
+/* IRQ:       DTE   WAIT     |   WAIT     DTE                               */
+/* ICIC:      -DTE           |   +DTE                                       */
+/* ICCR: 0x94       0x81     |   0xc0                                       */
+/* ICDR:      A8             |            D8(1)                             */
+/*                                                                          */
+/* 2 byte receive        [TX]| [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   D8(2)   ACK   P                */
+/* IRQ:       DTE   WAIT     |   WAIT          WAIT     DTE                 */
+/* ICIC:      -DTE           |                 +DTE                         */
+/* ICCR: 0x94       0x81     |                 0xc0                         */
+/* ICDR:      A8             |                 D8(1)    D8(2)               */
+/*                                                                          */
+/* 3 byte receive       [TX] | [RX]                                         */
+/* BUS:     S     A8     ACK | D8(1)   ACK   D8(2)   ACK   D8(3)   ACK    P */
+/* IRQ:       DTE   WAIT     |   WAIT          WAIT         WAIT      DTE   */
+/* ICIC:      -DTE           |                              +DTE            */
+/* ICCR: 0x94       0x81     |                              0xc0            */
+/* ICDR:      A8             |                 D8(1)        D8(2)     D8(3) */
+/*                                                                          */
+/* 4 bytes or more, this part is repeated    +---------+                    */
+/*                                                                          */
+/*                                                                          */
+/* Interrupt order and BUSY flag                                            */
+/*     ___                                                 _                */
+/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/                 */
+/* SCL      \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/                   */
+/*                                                                          */
+/*        S   D7  D6  D5  D4  D3  D2  D1  D0              P                 */
+/*                                           ___                            */
+/* WAIT IRQ ________________________________/   \___________                */
+/* TACK IRQ ____________________________________/   \_______                */
+/* DTE  IRQ __________________________________________/   \_                */
+/* AL   IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX                */
+/*         _______________________________________________                  */
+/* BUSY __/                                               \_                */
+/*                                                                          */
+
 enum sh_mobile_i2c_op {
 	OP_START = 0,
-	OP_TX_ONLY,
+	OP_TX_FIRST,
+	OP_TX,
 	OP_TX_STOP,
 	OP_TX_TO_RX,
-	OP_RX_ONLY,
+	OP_RX,
 	OP_RX_STOP,
+	OP_RX_STOP_DATA,
 };
 
 struct sh_mobile_i2c_data {
@@ -127,25 +198,34 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 	spin_lock_irqsave(&pd->lock, flags);
 
 	switch (op) {
-	case OP_START:
+	case OP_START: /* issue start and trigger DTE interrupt */
 		iowrite8(0x94, ICCR(pd));
 		break;
-	case OP_TX_ONLY:
+	case OP_TX_FIRST: /* disable DTE interrupt and write data */
+		iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd));
 		iowrite8(data, ICDR(pd));
 		break;
-	case OP_TX_STOP:
+	case OP_TX: /* write data */
 		iowrite8(data, ICDR(pd));
-		iowrite8(0x90, ICCR(pd));
-		iowrite8(ICIC_ALE | ICIC_TACKE, ICIC(pd));
 		break;
-	case OP_TX_TO_RX:
+	case OP_TX_STOP: /* write data and issue a stop afterwards */
 		iowrite8(data, ICDR(pd));
+		iowrite8(0x90, ICCR(pd));
+		break;
+	case OP_TX_TO_RX: /* select read mode */
 		iowrite8(0x81, ICCR(pd));
 		break;
-	case OP_RX_ONLY:
+	case OP_RX: /* just read data */
 		ret = ioread8(ICDR(pd));
 		break;
-	case OP_RX_STOP:
+	case OP_RX_STOP: /* enable DTE interrupt, issue stop */
+		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+			 ICIC(pd));
+		iowrite8(0xc0, ICCR(pd));
+		break;
+	case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
+		iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE,
+			 ICIC(pd));
 		ret = ioread8(ICDR(pd));
 		iowrite8(0xc0, ICCR(pd));
 		break;
@@ -157,58 +237,120 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
 	return ret;
 }
 
+static int sh_mobile_i2c_is_first_byte(struct sh_mobile_i2c_data *pd)
+{
+	if (pd->pos == -1)
+		return 1;
+
+	return 0;
+}
+
+static int sh_mobile_i2c_is_last_byte(struct sh_mobile_i2c_data *pd)
+{
+	if (pd->pos == (pd->msg->len - 1))
+		return 1;
+
+	return 0;
+}
+
+static void sh_mobile_i2c_get_data(struct sh_mobile_i2c_data *pd,
+				   unsigned char *buf)
+{
+	switch (pd->pos) {
+	case -1:
+		*buf = (pd->msg->addr & 0x7f) << 1;
+		*buf |= (pd->msg->flags & I2C_M_RD) ? 1 : 0;
+		break;
+	default:
+		*buf = pd->msg->buf[pd->pos];
+	}
+}
+
+static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
+{
+	unsigned char data;
+
+	if (pd->pos == pd->msg->len)
+		return 1;
+
+	sh_mobile_i2c_get_data(pd, &data);
+
+	if (sh_mobile_i2c_is_last_byte(pd))
+		i2c_op(pd, OP_TX_STOP, data);
+	else if (sh_mobile_i2c_is_first_byte(pd))
+		i2c_op(pd, OP_TX_FIRST, data);
+	else
+		i2c_op(pd, OP_TX, data);
+
+	pd->pos++;
+	return 0;
+}
+
+static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
+{
+	unsigned char data;
+	int real_pos;
+
+	do {
+		if (pd->pos <= -1) {
+			sh_mobile_i2c_get_data(pd, &data);
+
+			if (sh_mobile_i2c_is_first_byte(pd))
+				i2c_op(pd, OP_TX_FIRST, data);
+			else
+				i2c_op(pd, OP_TX, data);
+			break;
+		}
+
+		if (pd->pos == 0) {
+			i2c_op(pd, OP_TX_TO_RX, 0);
+			break;
+		}
+
+		real_pos = pd->pos - 2;
+
+		if (pd->pos == pd->msg->len) {
+			if (real_pos < 0) {
+				i2c_op(pd, OP_RX_STOP, 0);
+				break;
+			}
+			data = i2c_op(pd, OP_RX_STOP_DATA, 0);
+		} else
+			data = i2c_op(pd, OP_RX, 0);
+
+		pd->msg->buf[real_pos] = data;
+	} while (0);
+
+	pd->pos++;
+	return pd->pos == (pd->msg->len + 2);
+}
+
 static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 {
 	struct platform_device *dev = dev_id;
 	struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
-	struct i2c_msg *msg = pd->msg;
-	unsigned char data, sr;
-	int wakeup = 0;
+	unsigned char sr;
+	int wakeup;
 
 	sr = ioread8(ICSR(pd));
-	pd->sr |= sr;
+	pd->sr |= sr; /* remember state */
 
 	dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
-	       (msg->flags & I2C_M_RD) ? "read" : "write",
-	       pd->pos, msg->len);
+	       (pd->msg->flags & I2C_M_RD) ? "read" : "write",
+	       pd->pos, pd->msg->len);
 
 	if (sr & (ICSR_AL | ICSR_TACK)) {
-		iowrite8(0, ICIC(pd)); /* disable interrupts */
-		wakeup = 1;
-		goto do_wakeup;
-	}
+		/* don't interrupt transaction - continue to issue stop */
+		iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd));
+		wakeup = 0;
+	} else if (pd->msg->flags & I2C_M_RD)
+		wakeup = sh_mobile_i2c_isr_rx(pd);
+	else
+		wakeup = sh_mobile_i2c_isr_tx(pd);
 
-	if (pd->pos == msg->len) {
-		i2c_op(pd, OP_RX_ONLY, 0);
-		wakeup = 1;
-		goto do_wakeup;
-	}
+	if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
+		iowrite8(sr & ~ICSR_WAIT, ICSR(pd));
 
-	if (pd->pos == -1) {
-		data = (msg->addr & 0x7f) << 1;
-		data |= (msg->flags & I2C_M_RD) ? 1 : 0;
-	} else
-		data = msg->buf[pd->pos];
-
-	if ((pd->pos == -1) || !(msg->flags & I2C_M_RD)) {
-		if (msg->flags & I2C_M_RD)
-			i2c_op(pd, OP_TX_TO_RX, data);
-		else if (pd->pos == (msg->len - 1)) {
-			i2c_op(pd, OP_TX_STOP, data);
-			wakeup = 1;
-		} else
-			i2c_op(pd, OP_TX_ONLY, data);
-	} else {
-		if (pd->pos == (msg->len - 1))
-			data = i2c_op(pd, OP_RX_STOP, 0);
-		else
-			data = i2c_op(pd, OP_RX_ONLY, 0);
-
-		msg->buf[pd->pos] = data;
-	}
-	pd->pos++;
-
- do_wakeup:
 	if (wakeup) {
 		pd->sr |= SW_DONE;
 		wake_up(&pd->wait);
@@ -219,6 +361,11 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
 
 static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
 {
+	if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
+		dev_err(pd->dev, "Unsupported zero length i2c read\n");
+		return -EIO;
+	}
+
 	/* Initialize channel registers */
 	iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd));
 
@@ -233,9 +380,8 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
 	pd->pos = -1;
 	pd->sr = 0;
 
-	/* Enable all interrupts except wait */
-	iowrite8(ioread8(ICIC(pd)) | ICIC_ALE | ICIC_TACKE | ICIC_DTEE,
-		 ICIC(pd));
+	/* Enable all interrupts to begin with */
+	iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd));
 	return 0;
 }
 
@@ -268,25 +414,18 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
 		if (!k)
 			dev_err(pd->dev, "Transfer request timed out\n");
 
-		retry_count = 10;
+		retry_count = 1000;
 again:
 		val = ioread8(ICSR(pd));
 
 		dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
 
-		if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
-			err = -EIO;
-			break;
-		}
-
 		/* the interrupt handler may wake us up before the
 		 * transfer is finished, so poll the hardware
 		 * until we're done.
 		 */
-
-		if (!(!(val & ICSR_BUSY) && (val & ICSR_SCLM) &&
-		      (val & ICSR_SDAM))) {
-			msleep(1);
+		if (val & ICSR_BUSY) {
+			udelay(10);
 			if (retry_count--)
 				goto again;
 
@@ -294,6 +433,12 @@ again:
 			dev_err(pd->dev, "Polling timed out\n");
 			break;
 		}
+
+		/* handle missing acknowledge and arbitration lost */
+		if ((val | pd->sr) & (ICSR_TACK | ICSR_AL)) {
+			err = -EIO;
+			break;
+		}
 	}
 
 	deactivate_ch(pd);
-- 
GitLab


From 7c1e76897492d92b6a1c2d6892494d39ded9680c Mon Sep 17 00:00:00 2001
From: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Date: Wed, 3 Sep 2008 21:36:50 +0000
Subject: [PATCH 797/869] clockevents: prevent clockevent event_handler ending
 up handler_noop

There is a ordering related problem with clockevents code, due to which
clockevents_register_device() called after tickless/highres switch
will not work. The new clockevent ends up with clockevents_handle_noop as
event handler, resulting in no timer activity.

The problematic path seems to be

* old device already has hrtimer_interrupt as the event_handler
* new clockevent device registers with a higher rating
* tick_check_new_device() is called
  * clockevents_exchange_device() gets called
    * old->event_handler is set to clockevents_handle_noop
  * tick_setup_device() is called for the new device
    * which sets new->event_handler using the old->event_handler which is noop.

Change the ordering so that new device inherits the proper handler.

This does not have any issue in normal case as most likely all the clockevent
devices are setup before the highres switch. But, can potentially be affecting
some corner case where HPET force detect happens after the highres switch.
This was a problem with HPET in MSI mode code that we have been experimenting
with.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/clockchips.h | 2 ++
 kernel/time/clockevents.c  | 3 +--
 kernel/time/tick-common.c  | 1 +
 3 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/linux/clockchips.h b/include/linux/clockchips.h
index c33b0dc28e4..ed3a5d473e5 100644
--- a/include/linux/clockchips.h
+++ b/include/linux/clockchips.h
@@ -127,6 +127,8 @@ extern int clockevents_register_notifier(struct notifier_block *nb);
 extern int clockevents_program_event(struct clock_event_device *dev,
 				     ktime_t expires, ktime_t now);
 
+extern void clockevents_handle_noop(struct clock_event_device *dev);
+
 #ifdef CONFIG_GENERIC_CLOCKEVENTS
 extern void clockevents_notify(unsigned long reason, void *arg);
 #else
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 3d1e3e1a197..1876b526c77 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -177,7 +177,7 @@ void clockevents_register_device(struct clock_event_device *dev)
 /*
  * Noop handler when we shut down an event device
  */
-static void clockevents_handle_noop(struct clock_event_device *dev)
+void clockevents_handle_noop(struct clock_event_device *dev)
 {
 }
 
@@ -199,7 +199,6 @@ void clockevents_exchange_device(struct clock_event_device *old,
 	 * released list and do a notify add later.
 	 */
 	if (old) {
-		old->event_handler = clockevents_handle_noop;
 		clockevents_set_mode(old, CLOCK_EVT_MODE_UNUSED);
 		list_del(&old->list);
 		list_add(&old->list, &clockevents_released);
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 80c4336f418..c4777193d56 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -161,6 +161,7 @@ static void tick_setup_device(struct tick_device *td,
 	} else {
 		handler = td->evtdev->event_handler;
 		next_event = td->evtdev->next_event;
+		td->evtdev->event_handler = clockevents_handle_noop;
 	}
 
 	td->evtdev = newdev;
-- 
GitLab


From d4496b39559c6d43f83e4c08b899984f8b8089b5 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 3 Sep 2008 21:36:57 +0000
Subject: [PATCH 798/869] clockevents: prevent endless loop in periodic
 broadcast handler

The reprogramming of the periodic broadcast handler was broken,
when the first programming returned -ETIME. The clockevents code
stores the new expiry value in the clock events device next_event field
only when the programming time has not been elapsed yet. The loop in
question calculates the new expiry value from the next_event value
and therefor never increases.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/time/tick-broadcast.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 31463d370b9..3044a88357f 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -175,6 +175,8 @@ static void tick_do_periodic_broadcast(void)
  */
 static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
 {
+	ktime_t next;
+
 	tick_do_periodic_broadcast();
 
 	/*
@@ -185,10 +187,13 @@ static void tick_handle_periodic_broadcast(struct clock_event_device *dev)
 
 	/*
 	 * Setup the next period for devices, which do not have
-	 * periodic mode:
+	 * periodic mode. We read dev->next_event first and add to it
+	 * when the event alrady expired. clockevents_program_event()
+	 * sets dev->next_event only when the event is really
+	 * programmed to the device.
 	 */
-	for (;;) {
-		ktime_t next = ktime_add(dev->next_event, tick_period);
+	for (next = dev->next_event; ;) {
+		next = ktime_add(next, tick_period);
 
 		if (!clockevents_program_event(dev, next, ktime_get()))
 			return;
-- 
GitLab


From 7205656ab48da29a95d7f55e43a81db755d3cb3a Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 3 Sep 2008 21:37:03 +0000
Subject: [PATCH 799/869] clockevents: enforce reprogram in oneshot setup

In tick_oneshot_setup we program the device to the given next_event,
but we do not check the return value. We need to make sure that the
device is programmed enforced so the interrupt handler engine starts
working. Split out the reprogramming function from tick_program_event()
and call it with the device, which was handed in to tick_setup_oneshot().
Set the force argument, so the devices is firing an interrupt.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/time/tick-oneshot.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c
index 450c04935b6..06595c64b0c 100644
--- a/kernel/time/tick-oneshot.c
+++ b/kernel/time/tick-oneshot.c
@@ -23,11 +23,11 @@
 #include "tick-internal.h"
 
 /**
- * tick_program_event
+ * tick_program_event internal worker function
  */
-int tick_program_event(ktime_t expires, int force)
+static int __tick_program_event(struct clock_event_device *dev,
+				ktime_t expires, int force)
 {
-	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
 	ktime_t now = ktime_get();
 
 	while (1) {
@@ -40,6 +40,16 @@ int tick_program_event(ktime_t expires, int force)
 	}
 }
 
+/**
+ * tick_program_event
+ */
+int tick_program_event(ktime_t expires, int force)
+{
+	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
+
+	return __tick_program_event(dev, expires, force);
+}
+
 /**
  * tick_resume_onshot - resume oneshot mode
  */
@@ -61,7 +71,7 @@ void tick_setup_oneshot(struct clock_event_device *newdev,
 {
 	newdev->event_handler = handler;
 	clockevents_set_mode(newdev, CLOCK_EVT_MODE_ONESHOT);
-	clockevents_program_event(newdev, next_event, ktime_get());
+	__tick_program_event(newdev, next_event, 1);
 }
 
 /**
-- 
GitLab


From 9c17bcda991000351cb2373f78be7e4b1c44caa3 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 3 Sep 2008 21:37:08 +0000
Subject: [PATCH 800/869] clockevents: prevent multiple init/shutdown

While chasing the C1E/HPET bugreports I went through the clock events
code inch by inch and found that the broadcast device can be initialized
and shutdown multiple times. Multiple shutdowns are not critical, but
useless waste of time. Multiple initializations are simply broken. Another
CPU might have the device in use already after the first initialization and
the second init could just render it unusable again.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/time/tick-broadcast.c | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 3044a88357f..5744f40b269 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -210,7 +210,7 @@ static void tick_do_broadcast_on_off(void *why)
 	struct clock_event_device *bc, *dev;
 	struct tick_device *td;
 	unsigned long flags, *reason = why;
-	int cpu;
+	int cpu, bc_stopped;
 
 	spin_lock_irqsave(&tick_broadcast_lock, flags);
 
@@ -228,6 +228,8 @@ static void tick_do_broadcast_on_off(void *why)
 	if (!tick_device_is_functional(dev))
 		goto out;
 
+	bc_stopped = cpus_empty(tick_broadcast_mask);
+
 	switch (*reason) {
 	case CLOCK_EVT_NOTIFY_BROADCAST_ON:
 	case CLOCK_EVT_NOTIFY_BROADCAST_FORCE:
@@ -250,9 +252,10 @@ static void tick_do_broadcast_on_off(void *why)
 		break;
 	}
 
-	if (cpus_empty(tick_broadcast_mask))
-		clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
-	else {
+	if (cpus_empty(tick_broadcast_mask)) {
+		if (!bc_stopped)
+			clockevents_set_mode(bc, CLOCK_EVT_MODE_SHUTDOWN);
+	} else if (bc_stopped) {
 		if (tick_broadcast_device.mode == TICKDEV_MODE_PERIODIC)
 			tick_broadcast_start_periodic(bc);
 		else
@@ -501,9 +504,12 @@ static void tick_broadcast_clear_oneshot(int cpu)
  */
 void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
 {
-	bc->event_handler = tick_handle_oneshot_broadcast;
-	clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
-	bc->next_event.tv64 = KTIME_MAX;
+	/* Set it up only once ! */
+	if (bc->event_handler != tick_handle_oneshot_broadcast) {
+		bc->event_handler = tick_handle_oneshot_broadcast;
+		clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
+		bc->next_event.tv64 = KTIME_MAX;
+	}
 }
 
 /*
-- 
GitLab


From 1fb9b7d29d8e85ba3196eaa7ab871bf76fc98d36 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 3 Sep 2008 21:37:14 +0000
Subject: [PATCH 801/869] clockevents: prevent endless loop lockup

The C1E/HPET bug reports on AMDX2/RS690 systems where tracked down to a
too small value of the HPET minumum delta for programming an event.

The clockevents code needs to enforce an interrupt event on the clock event
device in some cases. The enforcement code was stupid and naive, as it just
added the minimum delta to the current time and tried to reprogram the device.
When the minimum delta is too small, then this loops forever.

Add a sanity check. Allow reprogramming to fail 3 times, then print a warning
and double the minimum delta value to make sure, that this does not happen again.
Use the same function for both tick-oneshot and tick-broadcast code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/time/tick-broadcast.c | 12 ++----------
 kernel/time/tick-internal.h  |  2 ++
 kernel/time/tick-oneshot.c   | 36 ++++++++++++++++++++++++++++++------
 3 files changed, 34 insertions(+), 16 deletions(-)

diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 5744f40b269..2bc1f046151 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -372,16 +372,8 @@ cpumask_t *tick_get_broadcast_oneshot_mask(void)
 static int tick_broadcast_set_event(ktime_t expires, int force)
 {
 	struct clock_event_device *bc = tick_broadcast_device.evtdev;
-	ktime_t now = ktime_get();
-	int res;
-
-	for(;;) {
-		res = clockevents_program_event(bc, expires, now);
-		if (!res || !force)
-			return res;
-		now = ktime_get();
-		expires = ktime_add(now, ktime_set(0, bc->min_delta_ns));
-	}
+
+	return tick_dev_program_event(bc, expires, force);
 }
 
 int tick_resume_broadcast_oneshot(struct clock_event_device *bc)
diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h
index f13f2b7f4fd..0ffc2918ea6 100644
--- a/kernel/time/tick-internal.h
+++ b/kernel/time/tick-internal.h
@@ -17,6 +17,8 @@ extern void tick_handle_periodic(struct clock_event_device *dev);
 extern void tick_setup_oneshot(struct clock_event_device *newdev,
 			       void (*handler)(struct clock_event_device *),
 			       ktime_t nextevt);
+extern int tick_dev_program_event(struct clock_event_device *dev,
+				  ktime_t expires, int force);
 extern int tick_program_event(ktime_t expires, int force);
 extern void tick_oneshot_notify(void);
 extern int tick_switch_to_oneshot(void (*handler)(struct clock_event_device *));
diff --git a/kernel/time/tick-oneshot.c b/kernel/time/tick-oneshot.c
index 06595c64b0c..2e35501e61d 100644
--- a/kernel/time/tick-oneshot.c
+++ b/kernel/time/tick-oneshot.c
@@ -25,18 +25,42 @@
 /**
  * tick_program_event internal worker function
  */
-static int __tick_program_event(struct clock_event_device *dev,
-				ktime_t expires, int force)
+int tick_dev_program_event(struct clock_event_device *dev, ktime_t expires,
+			   int force)
 {
 	ktime_t now = ktime_get();
+	int i;
 
-	while (1) {
+	for (i = 0;;) {
 		int ret = clockevents_program_event(dev, expires, now);
 
 		if (!ret || !force)
 			return ret;
+
+		/*
+		 * We tried 2 times to program the device with the given
+		 * min_delta_ns. If that's not working then we double it
+		 * and emit a warning.
+		 */
+		if (++i > 2) {
+			printk(KERN_WARNING "CE: __tick_program_event of %s is "
+			       "stuck %llx %llx\n", dev->name ? dev->name : "?",
+			       now.tv64, expires.tv64);
+			printk(KERN_WARNING
+			       "CE: increasing min_delta_ns %ld to %ld nsec\n",
+			       dev->min_delta_ns, dev->min_delta_ns << 1);
+			WARN_ON(1);
+
+			/* Double the min. delta and try again */
+			if (!dev->min_delta_ns)
+				dev->min_delta_ns = 5000;
+			else
+				dev->min_delta_ns <<= 1;
+			i = 0;
+		}
+
 		now = ktime_get();
-		expires = ktime_add(now, ktime_set(0, dev->min_delta_ns));
+		expires = ktime_add_ns(now, dev->min_delta_ns);
 	}
 }
 
@@ -47,7 +71,7 @@ int tick_program_event(ktime_t expires, int force)
 {
 	struct clock_event_device *dev = __get_cpu_var(tick_cpu_device).evtdev;
 
-	return __tick_program_event(dev, expires, force);
+	return tick_dev_program_event(dev, expires, force);
 }
 
 /**
@@ -71,7 +95,7 @@ void tick_setup_oneshot(struct clock_event_device *newdev,
 {
 	newdev->event_handler = handler;
 	clockevents_set_mode(newdev, CLOCK_EVT_MODE_ONESHOT);
-	__tick_program_event(newdev, next_event, 1);
+	tick_dev_program_event(newdev, next_event, 1);
 }
 
 /**
-- 
GitLab


From 7cfb0435330364f90f274a26ecdc5f47f738498c Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Wed, 3 Sep 2008 21:37:24 +0000
Subject: [PATCH 802/869] HPET: make minimum reprogramming delta useful

The minimum reprogramming delta was hardcoded in HPET ticks,
which is stupid as it does not work with faster running HPETs.
The C1E idle patches made this prominent on AMD/RS690 chipsets,
where the HPET runs with 25MHz. Set it to 5us which seems to be
a reasonable value and fixes the problems on the bug reporters
machines. We have a further sanity check now in the clock events,
which increases the delta when it is not sufficient.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Tested-by: Dmitry Nezhevenko <dion@inhex.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/hpet.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 59fd3b6b130..2256315416d 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -210,8 +210,8 @@ static void hpet_legacy_clockevent_register(void)
 	/* Calculate the min / max delta */
 	hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 							   &hpet_clockevent);
-	hpet_clockevent.min_delta_ns = clockevent_delta2ns(0x30,
-							   &hpet_clockevent);
+	/* 5 usec minimum reprogramming delta. */
+	hpet_clockevent.min_delta_ns = 5000;
 
 	/*
 	 * Start hpet with the boot cpu mask and make it
-- 
GitLab


From 076c7f4c6c55c37975c8e04ae6827267794d5d2e Mon Sep 17 00:00:00 2001
From: Dmitry Baryshkov <dbaryshkov@gmail.com>
Date: Thu, 4 Sep 2008 13:28:33 +0400
Subject: [PATCH 803/869] [MTD] [NAND] tmio_nand: fix base address programming

Fix offset of second word used for programming base address of memory
window. Also program tmio with offset of the FCR, not with physical
memory location.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 drivers/mtd/nand/tmio_nand.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index cbab654b03c..edb1e322113 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -109,7 +109,7 @@ struct tmio_nand {
 
 	void __iomem *ccr;
 	void __iomem *fcr;
-	unsigned long fcr_phys;
+	unsigned long fcr_base;
 
 	unsigned int irq;
 
@@ -316,8 +316,8 @@ static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
 	tmio_iowrite8(0x81, tmio->ccr + CCR_ICC);
 
 	/* (10h)BaseAddress    0x1000 spba.spba2 */
-	tmio_iowrite16(tmio->fcr_phys, tmio->ccr + CCR_BASE);
-	tmio_iowrite16(tmio->fcr_phys >> 16, tmio->ccr + CCR_BASE + 16);
+	tmio_iowrite16(tmio->fcr_base, tmio->ccr + CCR_BASE);
+	tmio_iowrite16(tmio->fcr_base >> 16, tmio->ccr + CCR_BASE + 2);
 
 	/* (04h)Command Register I/O spcmd */
 	tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND);
@@ -395,7 +395,7 @@ static int tmio_probe(struct platform_device *dev)
 		goto err_iomap_ccr;
 	}
 
-	tmio->fcr_phys = (unsigned long)fcr->start;
+	tmio->fcr_base = fcr->start & 0xfffff;
 	tmio->fcr = ioremap(fcr->start, fcr->end - fcr->start + 1);
 	if (!tmio->fcr) {
 		retval = -EIO;
-- 
GitLab


From afbc8d8e72daa5a5faf6a0242186bdfcc42b2427 Mon Sep 17 00:00:00 2001
From: Khem Raj <raj.khem@gmail.com>
Date: Thu, 4 Sep 2008 23:11:01 -0700
Subject: [PATCH 804/869] Fix conditional export of kvh.h and a.out.h to
 userspace.

Some architectures have moved the asm/ into arch/ and some have not.
This patch checks for a.out.h and kvh.h in both places before exporting
the corresponding file from linux/

[dwmw2: simplified a little]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---
 include/asm-generic/Kbuild.asm | 6 ++++--
 include/linux/Kbuild           | 6 ++++--
 2 files changed, 8 insertions(+), 4 deletions(-)

diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm
index 1170dc60e63..1870d5e05f1 100644
--- a/include/asm-generic/Kbuild.asm
+++ b/include/asm-generic/Kbuild.asm
@@ -1,8 +1,10 @@
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+      		  $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
 header-y  += kvm.h
 endif
 
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+      		  $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
 unifdef-y += a.out.h
 endif
 unifdef-y += auxvec.h
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index 59391250d51..b68ec09399b 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -167,7 +167,8 @@ unifdef-y += acct.h
 unifdef-y += adb.h
 unifdef-y += adfs_fs.h
 unifdef-y += agpgart.h
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/a.out.h \
+      		  $(srctree)/include/asm-$(SRCARCH)/a.out.h),)
 unifdef-y += a.out.h
 endif
 unifdef-y += apm_bios.h
@@ -258,7 +259,8 @@ unifdef-y += kd.h
 unifdef-y += kernelcapi.h
 unifdef-y += kernel.h
 unifdef-y += keyboard.h
-ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
+ifneq ($(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/kvm.h \
+      		  $(srctree)/include/asm-$(SRCARCH)/kvm.h),)
 unifdef-y += kvm.h
 endif
 unifdef-y += llc.h
-- 
GitLab


From de24125dd0a452bfd4502fc448e3534c5d2e87aa Mon Sep 17 00:00:00 2001
From: Yuri Tikhonov <yur@emcraft.com>
Date: Fri, 5 Sep 2008 08:15:47 -0700
Subject: [PATCH 805/869] async_tx: fix the bug in async_tx_run_dependencies

Should clear the next pointer of the TX if we are sure that the
next TX (say NXT) will be submitted to the channel too. Overwise,
we break the chain of descriptors, because we lose the information
about the next descriptor to run. So next time, when invoke
async_tx_run_dependencies() with TX, it's TX->next will be NULL, and
NXT will be never submitted.

Cc: <stable@kernel.org>		[2.6.26]
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 crypto/async_tx/async_tx.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/crypto/async_tx/async_tx.c b/crypto/async_tx/async_tx.c
index 85eaf7b1c53..e8362c1efa3 100644
--- a/crypto/async_tx/async_tx.c
+++ b/crypto/async_tx/async_tx.c
@@ -137,7 +137,8 @@ async_tx_run_dependencies(struct dma_async_tx_descriptor *tx)
 		spin_lock_bh(&next->lock);
 		next->parent = NULL;
 		_next = next->next;
-		next->next = NULL;
+		if (_next && _next->chan == chan)
+			next->next = NULL;
 		spin_unlock_bh(&next->lock);
 
 		next->tx_submit(next);
-- 
GitLab


From b35de672e74ceea6482b4f690ad053aec8465c5d Mon Sep 17 00:00:00 2001
From: David Woodhouse <David.Woodhouse@intel.com>
Date: Fri, 5 Sep 2008 16:01:15 +0100
Subject: [PATCH 806/869] Revert "[ARM] use the new byteorder headers"

This reverts commit ae82cbfc8beaa69007aa09966d3983ac938c3577. It
needs the new byteorder headers to be exported to userspace, and
they aren't yet -- and probably shouldn't be, at this point in the
2.6.27 release cycle (or ever, for that matter).

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/byteorder.h | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
index d04a7a2bc2e..4fbfb22f65a 100644
--- a/arch/arm/include/asm/byteorder.h
+++ b/arch/arm/include/asm/byteorder.h
@@ -18,15 +18,7 @@
 #include <linux/compiler.h>
 #include <asm/types.h>
 
-#ifdef __ARMEB__
-# define __BIG_ENDIAN
-#else
-# define __LITTLE_ENDIAN
-#endif
-
-#define __SWAB_64_THRU_32__
-
-static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
 {
 	__u32 t;
 
@@ -48,8 +40,19 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 
 	return x;
 }
-#define __arch_swab32 __arch_swab32
 
-#include <linux/byteorder.h>
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __ARMEB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
 
 #endif
+
-- 
GitLab


From 56c7426b3951e4f35a71d695f1c982989399d6fd Mon Sep 17 00:00:00 2001
From: Peter Zijlstra <a.p.zijlstra@chello.nl>
Date: Mon, 1 Sep 2008 16:44:23 +0200
Subject: [PATCH 807/869] sched_clock: fix NOHZ interaction

If HLT stops the TSC, we'll fail to account idle time, thereby inflating the
actual process times. Fix this by re-calibrating the clock against GTOD when
leaving nohz mode.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Tested-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/time/tick-sched.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c
index 7a46bde78c6..a87b0468568 100644
--- a/kernel/time/tick-sched.c
+++ b/kernel/time/tick-sched.c
@@ -162,6 +162,8 @@ void tick_nohz_stop_idle(int cpu)
 		ts->idle_lastupdate = now;
 		ts->idle_sleeptime = ktime_add(ts->idle_sleeptime, delta);
 		ts->idle_active = 0;
+
+		sched_clock_idle_wakeup_event(0);
 	}
 }
 
@@ -177,6 +179,7 @@ static ktime_t tick_nohz_start_idle(struct tick_sched *ts)
 	}
 	ts->idle_entrytime = now;
 	ts->idle_active = 1;
+	sched_clock_idle_sleep_event();
 	return now;
 }
 
-- 
GitLab


From 49048622eae698e5c4ae61f7e71200f265ccc529 Mon Sep 17 00:00:00 2001
From: Balbir Singh <balbir@linux.vnet.ibm.com>
Date: Fri, 5 Sep 2008 18:12:23 +0200
Subject: [PATCH 808/869] sched: fix process time monotonicity

Spencer reported a problem where utime and stime were going negative despite
the fixes in commit b27f03d4bdc145a09fb7b0c0e004b29f1ee555fa. The suspected
reason for the problem is that signal_struct maintains it's own utime and
stime (of exited tasks), these are not updated using the new task_utime()
routine, hence sig->utime can go backwards and cause the same problem
to occur (sig->utime, adds tsk->utime and not task_utime()). This patch
fixes the problem

TODO: using max(task->prev_utime, derived utime) works for now, but a more
generic solution is to implement cputime_max() and use the cputime_gt()
function for comparison.

Reported-by: spencer@bluehost.com
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 fs/proc/array.c       | 59 -------------------------------------------
 include/linux/sched.h |  4 +++
 kernel/exit.c         |  6 ++---
 kernel/sched.c        | 59 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 66 insertions(+), 62 deletions(-)

diff --git a/fs/proc/array.c b/fs/proc/array.c
index 0d6eb33597c..71c9be59c9c 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -337,65 +337,6 @@ int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
 	return 0;
 }
 
-/*
- * Use precise platform statistics if available:
- */
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
-static cputime_t task_utime(struct task_struct *p)
-{
-	return p->utime;
-}
-
-static cputime_t task_stime(struct task_struct *p)
-{
-	return p->stime;
-}
-#else
-static cputime_t task_utime(struct task_struct *p)
-{
-	clock_t utime = cputime_to_clock_t(p->utime),
-		total = utime + cputime_to_clock_t(p->stime);
-	u64 temp;
-
-	/*
-	 * Use CFS's precise accounting:
-	 */
-	temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
-
-	if (total) {
-		temp *= utime;
-		do_div(temp, total);
-	}
-	utime = (clock_t)temp;
-
-	p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
-	return p->prev_utime;
-}
-
-static cputime_t task_stime(struct task_struct *p)
-{
-	clock_t stime;
-
-	/*
-	 * Use CFS's precise accounting. (we subtract utime from
-	 * the total, to make sure the total observed by userspace
-	 * grows monotonically - apps rely on that):
-	 */
-	stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
-			cputime_to_clock_t(task_utime(p));
-
-	if (stime >= 0)
-		p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
-
-	return p->prev_stime;
-}
-#endif
-
-static cputime_t task_gtime(struct task_struct *p)
-{
-	return p->gtime;
-}
-
 static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
 			struct pid *pid, struct task_struct *task, int whole)
 {
diff --git a/include/linux/sched.h b/include/linux/sched.h
index cfb0d87b99f..3d9120c5ad1 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1475,6 +1475,10 @@ static inline void put_task_struct(struct task_struct *t)
 		__put_task_struct(t);
 }
 
+extern cputime_t task_utime(struct task_struct *p);
+extern cputime_t task_stime(struct task_struct *p);
+extern cputime_t task_gtime(struct task_struct *p);
+
 /*
  * Per process flags
  */
diff --git a/kernel/exit.c b/kernel/exit.c
index 25ed2ad986d..16395644a98 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -112,9 +112,9 @@ static void __exit_signal(struct task_struct *tsk)
 		 * We won't ever get here for the group leader, since it
 		 * will have been the last reference on the signal_struct.
 		 */
-		sig->utime = cputime_add(sig->utime, tsk->utime);
-		sig->stime = cputime_add(sig->stime, tsk->stime);
-		sig->gtime = cputime_add(sig->gtime, tsk->gtime);
+		sig->utime = cputime_add(sig->utime, task_utime(tsk));
+		sig->stime = cputime_add(sig->stime, task_stime(tsk));
+		sig->gtime = cputime_add(sig->gtime, task_gtime(tsk));
 		sig->min_flt += tsk->min_flt;
 		sig->maj_flt += tsk->maj_flt;
 		sig->nvcsw += tsk->nvcsw;
diff --git a/kernel/sched.c b/kernel/sched.c
index 9a1ddb84e26..1a5f73c1fcd 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4178,6 +4178,65 @@ void account_steal_time(struct task_struct *p, cputime_t steal)
 		cpustat->steal = cputime64_add(cpustat->steal, tmp);
 }
 
+/*
+ * Use precise platform statistics if available:
+ */
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+cputime_t task_utime(struct task_struct *p)
+{
+	return p->utime;
+}
+
+cputime_t task_stime(struct task_struct *p)
+{
+	return p->stime;
+}
+#else
+cputime_t task_utime(struct task_struct *p)
+{
+	clock_t utime = cputime_to_clock_t(p->utime),
+		total = utime + cputime_to_clock_t(p->stime);
+	u64 temp;
+
+	/*
+	 * Use CFS's precise accounting:
+	 */
+	temp = (u64)nsec_to_clock_t(p->se.sum_exec_runtime);
+
+	if (total) {
+		temp *= utime;
+		do_div(temp, total);
+	}
+	utime = (clock_t)temp;
+
+	p->prev_utime = max(p->prev_utime, clock_t_to_cputime(utime));
+	return p->prev_utime;
+}
+
+cputime_t task_stime(struct task_struct *p)
+{
+	clock_t stime;
+
+	/*
+	 * Use CFS's precise accounting. (we subtract utime from
+	 * the total, to make sure the total observed by userspace
+	 * grows monotonically - apps rely on that):
+	 */
+	stime = nsec_to_clock_t(p->se.sum_exec_runtime) -
+			cputime_to_clock_t(task_utime(p));
+
+	if (stime >= 0)
+		p->prev_stime = max(p->prev_stime, clock_t_to_cputime(stime));
+
+	return p->prev_stime;
+}
+#endif
+
+inline cputime_t task_gtime(struct task_struct *p)
+{
+	return p->gtime;
+}
+
 /*
  * This function gets called by the timer code, with HZ frequency.
  * We call it with interrupts disabled.
-- 
GitLab


From f171d4d769c8ccac6675892960e37f6485837fae Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 3 Sep 2008 16:17:14 +0300
Subject: [PATCH 809/869] UBIFS: fix division by zero

If fanout is 3, we have division by zero in
'ubifs_read_superblock()':

divide error: 0000 [#1] PREEMPT SMP

Pid: 28744, comm: mount Not tainted (2.6.27-rc4-ubifs-2.6 #23)
EIP: 0060:[<f8f9e3ef>] EFLAGS: 00010202 CPU: 0
EIP is at ubifs_reported_space+0x2d/0x69 [ubifs]
EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000
ESI: 00000000 EDI: f0ae64b0 EBP: f1f9fcf4 ESP: f1f9fce0
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/budget.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c
index 101d278c591..73db464cd08 100644
--- a/fs/ubifs/budget.c
+++ b/fs/ubifs/budget.c
@@ -723,24 +723,25 @@ void ubifs_release_dirty_inode_budget(struct ubifs_info *c,
  */
 long long ubifs_reported_space(const struct ubifs_info *c, uint64_t free)
 {
-	int divisor, factor;
+	int divisor, factor, f;
 
 	/*
 	 * Reported space size is @free * X, where X is UBIFS block size
 	 * divided by UBIFS block size + all overhead one data block
 	 * introduces. The overhead is the node header + indexing overhead.
 	 *
-	 * Indexing overhead is calculations are based on the following
-	 * formula: I = N/(f - 1) + 1, where I - number of indexing nodes, N -
-	 * number of data nodes, f - fanout. Because effective UBIFS fanout is
-	 * twice as less than maximum fanout, we assume that each data node
+	 * Indexing overhead calculations are based on the following formula:
+	 * I = N/(f - 1) + 1, where I - number of indexing nodes, N - number
+	 * of data nodes, f - fanout. Because effective UBIFS fanout is twice
+	 * as less than maximum fanout, we assume that each data node
 	 * introduces 3 * @c->max_idx_node_sz / (@c->fanout/2 - 1) bytes.
 	 * Note, the multiplier 3 is because UBIFS reseves thrice as more space
 	 * for the index.
 	 */
+	f = c->fanout > 3 ? c->fanout >> 1 : 2;
 	factor = UBIFS_BLOCK_SIZE;
 	divisor = UBIFS_MAX_DATA_NODE_SZ;
-	divisor += (c->max_idx_node_sz * 3) / ((c->fanout >> 1) - 1);
+	divisor += (c->max_idx_node_sz * 3) / (f - 1);
 	free *= factor;
 	do_div(free, divisor);
 	return free;
-- 
GitLab


From a5cb562d6977d9d7989c346b7b153cef31ec0228 Mon Sep 17 00:00:00 2001
From: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Date: Wed, 3 Sep 2008 18:26:47 +0300
Subject: [PATCH 810/869] UBIFS: make minimum fanout 3

UBIFS does not really work correctly when fanout is 2,
because of the way we manage the indexing tree. It may
just become a list and UBIFS screws up.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
---
 fs/ubifs/ubifs-media.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ubifs/ubifs-media.h b/fs/ubifs/ubifs-media.h
index bd2121f3426..a9ecbd9af20 100644
--- a/fs/ubifs/ubifs-media.h
+++ b/fs/ubifs/ubifs-media.h
@@ -87,7 +87,7 @@
 #define UBIFS_SK_LEN 8
 
 /* Minimum index tree fanout */
-#define UBIFS_MIN_FANOUT 2
+#define UBIFS_MIN_FANOUT 3
 
 /* Maximum number of levels in UBIFS indexing B-tree */
 #define UBIFS_MAX_LEVELS 512
-- 
GitLab


From bf7394ccc13fe291d9258f01113b4c61214ddeae Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 5 Sep 2008 12:38:09 -0700
Subject: [PATCH 811/869] Revert "mac80211: Use IWEVASSOCREQIE instead of
 IWEVCUSTOM"

This reverts commit 087d833e5a9f67ba933cb32eaf5a2279c1a5b47c, which was
reported to break wireless at least in some combinations with 32bit user
space and a 64bit kernel.  Alex Williamnson bisected it to this commit.

Reported-and-bisected-by: Alex Williamson <alex.williamson@hp.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
Cc: David Miller <davem@davemloft.net>
Cc: Jouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 net/mac80211/mlme.c | 48 ++++++++++++++++++++++++++++++++++++---------
 1 file changed, 39 insertions(+), 9 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 9bb68c6a8f4..902cac1bd24 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -478,21 +478,51 @@ int ieee80211_ht_addt_info_ie_to_ht_bss_info(
 static void ieee80211_sta_send_associnfo(struct net_device *dev,
 					 struct ieee80211_if_sta *ifsta)
 {
+	char *buf;
+	size_t len;
+	int i;
 	union iwreq_data wrqu;
 
+	if (!ifsta->assocreq_ies && !ifsta->assocresp_ies)
+		return;
+
+	buf = kmalloc(50 + 2 * (ifsta->assocreq_ies_len +
+				ifsta->assocresp_ies_len), GFP_KERNEL);
+	if (!buf)
+		return;
+
+	len = sprintf(buf, "ASSOCINFO(");
 	if (ifsta->assocreq_ies) {
-		memset(&wrqu, 0, sizeof(wrqu));
-		wrqu.data.length = ifsta->assocreq_ies_len;
-		wireless_send_event(dev, IWEVASSOCREQIE, &wrqu,
-				    ifsta->assocreq_ies);
+		len += sprintf(buf + len, "ReqIEs=");
+		for (i = 0; i < ifsta->assocreq_ies_len; i++) {
+			len += sprintf(buf + len, "%02x",
+				       ifsta->assocreq_ies[i]);
+		}
 	}
-
 	if (ifsta->assocresp_ies) {
-		memset(&wrqu, 0, sizeof(wrqu));
-		wrqu.data.length = ifsta->assocresp_ies_len;
-		wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu,
-				    ifsta->assocresp_ies);
+		if (ifsta->assocreq_ies)
+			len += sprintf(buf + len, " ");
+		len += sprintf(buf + len, "RespIEs=");
+		for (i = 0; i < ifsta->assocresp_ies_len; i++) {
+			len += sprintf(buf + len, "%02x",
+				       ifsta->assocresp_ies[i]);
+		}
+	}
+	len += sprintf(buf + len, ")");
+
+	if (len > IW_CUSTOM_MAX) {
+		len = sprintf(buf, "ASSOCRESPIE=");
+		for (i = 0; i < ifsta->assocresp_ies_len; i++) {
+			len += sprintf(buf + len, "%02x",
+				       ifsta->assocresp_ies[i]);
+		}
 	}
+
+	memset(&wrqu, 0, sizeof(wrqu));
+	wrqu.data.length = len;
+	wireless_send_event(dev, IWEVCUSTOM, &wrqu, buf);
+
+	kfree(buf);
 }
 
 
-- 
GitLab


From 0510617b85758b6e66f3c602ceccea1826440470 Mon Sep 17 00:00:00 2001
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Mon, 4 Aug 2008 19:44:34 +0200
Subject: [PATCH 812/869] [MIPS] Fix data bus error recovery

With -ffunction-section the entries in __dbe_table aren't no longer
sorted, so the lookup of exception addresses in do_be() failed for
some addresses. To avoid this we now sort __dbe_table.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/traps.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 426cced1e9d..1f579a8ea25 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -373,8 +373,8 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
 	do_exit(SIGSEGV);
 }
 
-extern const struct exception_table_entry __start___dbe_table[];
-extern const struct exception_table_entry __stop___dbe_table[];
+extern struct exception_table_entry __start___dbe_table[];
+extern struct exception_table_entry __stop___dbe_table[];
 
 __asm__(
 "	.section	__dbe_table, \"a\"\n"
@@ -1682,4 +1682,6 @@ void __init trap_init(void)
 
 	flush_icache_range(ebase, ebase + 0x400);
 	flush_tlb_handlers();
+
+	sort_extable(__start___dbe_table, __stop___dbe_table);
 }
-- 
GitLab


From e0cee3eea7875800451739ae38f99edcf11c133d Mon Sep 17 00:00:00 2001
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Mon, 4 Aug 2008 20:53:57 +0200
Subject: [PATCH 813/869] [MIPS] Fix WARNING: at kernel/smp.c:290

trap_init issues flush_icache_range(), which uses ipi functions to
get icache flushing done on all cpus. But this is done before interrupts
are enabled and caused WARN_ON messages. This changeset introduces
a new local_flush_icache_range() and uses it before interrupts (and
additional CPUs) are enabled to avoid this problem.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/kernel/traps.c      | 12 +++++++-----
 arch/mips/mm/c-r3k.c          |  1 +
 arch/mips/mm/c-r4k.c          | 18 ++++++++++++------
 arch/mips/mm/c-tx39.c         |  1 +
 arch/mips/mm/cache.c          |  1 +
 arch/mips/mm/tlbex.c          |  6 +++---
 include/asm-mips/cacheflush.h |  1 +
 7 files changed, 26 insertions(+), 14 deletions(-)

diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index 1f579a8ea25..6bee29097a5 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -1200,7 +1200,7 @@ void *set_except_vector(int n, void *addr)
 	if (n == 0 && cpu_has_divec) {
 		*(u32 *)(ebase + 0x200) = 0x08000000 |
 					  (0x03ffffff & (handler >> 2));
-		flush_icache_range(ebase + 0x200, ebase + 0x204);
+		local_flush_icache_range(ebase + 0x200, ebase + 0x204);
 	}
 	return (void *)old_handler;
 }
@@ -1283,7 +1283,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
 		w = (u32 *)(b + ori_offset);
 		*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
-		flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+handler_len));
 	}
 	else {
 		/*
@@ -1295,7 +1296,8 @@ static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
 		w = (u32 *)b;
 		*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
 		*w = 0;
-		flush_icache_range((unsigned long)b, (unsigned long)(b+8));
+		local_flush_icache_range((unsigned long)b,
+					 (unsigned long)(b+8));
 	}
 
 	return (void *)old_handler;
@@ -1515,7 +1517,7 @@ void __cpuinit per_cpu_trap_init(void)
 void __init set_handler(unsigned long offset, void *addr, unsigned long size)
 {
 	memcpy((void *)(ebase + offset), addr, size);
-	flush_icache_range(ebase + offset, ebase + offset + size);
+	local_flush_icache_range(ebase + offset, ebase + offset + size);
 }
 
 static char panic_null_cerr[] __cpuinitdata =
@@ -1680,7 +1682,7 @@ void __init trap_init(void)
 	signal32_init();
 #endif
 
-	flush_icache_range(ebase, ebase + 0x400);
+	local_flush_icache_range(ebase, ebase + 0x400);
 	flush_tlb_handlers();
 
 	sort_extable(__start___dbe_table, __stop___dbe_table);
diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c
index 27a5b466c85..5500c20c79a 100644
--- a/arch/mips/mm/c-r3k.c
+++ b/arch/mips/mm/c-r3k.c
@@ -320,6 +320,7 @@ void __cpuinit r3k_cache_init(void)
 	flush_cache_range = r3k_flush_cache_range;
 	flush_cache_page = r3k_flush_cache_page;
 	flush_icache_range = r3k_flush_icache_range;
+	local_flush_icache_range = r3k_flush_icache_range;
 
 	flush_cache_sigtramp = r3k_flush_cache_sigtramp;
 	local_flush_data_cache_page = local_r3k_flush_data_cache_page;
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 71df3390c07..6e99665ae86 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -543,12 +543,8 @@ struct flush_icache_range_args {
 	unsigned long end;
 };
 
-static inline void local_r4k_flush_icache_range(void *args)
+static inline void local_r4k_flush_icache_range(unsigned long start, unsigned long end)
 {
-	struct flush_icache_range_args *fir_args = args;
-	unsigned long start = fir_args->start;
-	unsigned long end = fir_args->end;
-
 	if (!cpu_has_ic_fills_f_dc) {
 		if (end - start >= dcache_size) {
 			r4k_blast_dcache();
@@ -564,6 +560,15 @@ static inline void local_r4k_flush_icache_range(void *args)
 		protected_blast_icache_range(start, end);
 }
 
+static inline void local_r4k_flush_icache_range_ipi(void *args)
+{
+	struct flush_icache_range_args *fir_args = args;
+	unsigned long start = fir_args->start;
+	unsigned long end = fir_args->end;
+
+	local_r4k_flush_icache_range(start, end);
+}
+
 static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 {
 	struct flush_icache_range_args args;
@@ -571,7 +576,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.start = start;
 	args.end = end;
 
-	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_range_ipi, &args, 1);
 	instruction_hazard();
 }
 
@@ -1375,6 +1380,7 @@ void __cpuinit r4k_cache_init(void)
 	local_flush_data_cache_page	= local_r4k_flush_data_cache_page;
 	flush_data_cache_page	= r4k_flush_data_cache_page;
 	flush_icache_range	= r4k_flush_icache_range;
+	local_flush_icache_range	= local_r4k_flush_icache_range;
 
 #if defined(CONFIG_DMA_NONCOHERENT)
 	if (coherentio) {
diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index a9f7f1f5e9b..39c81820ce8 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -362,6 +362,7 @@ void __cpuinit tx39_cache_init(void)
 		flush_cache_range	= (void *) tx39h_flush_icache_all;
 		flush_cache_page	= (void *) tx39h_flush_icache_all;
 		flush_icache_range	= (void *) tx39h_flush_icache_all;
+		local_flush_icache_range = (void *) tx39h_flush_icache_all;
 
 		flush_cache_sigtramp	= (void *) tx39h_flush_icache_all;
 		local_flush_data_cache_page	= (void *) tx39h_flush_icache_all;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 034e8506f6e..1eb7c71e3d6 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -29,6 +29,7 @@ void (*flush_cache_range)(struct vm_area_struct *vma, unsigned long start,
 void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page,
 	unsigned long pfn);
 void (*flush_icache_range)(unsigned long start, unsigned long end);
+void (*local_flush_icache_range)(unsigned long start, unsigned long end);
 
 void (*__flush_cache_vmap)(void);
 void (*__flush_cache_vunmap)(void);
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 76da73a5ab3..979cf919728 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1273,10 +1273,10 @@ void __cpuinit build_tlb_refill_handler(void)
 
 void __cpuinit flush_tlb_handlers(void)
 {
-	flush_icache_range((unsigned long)handle_tlbl,
+	local_flush_icache_range((unsigned long)handle_tlbl,
 			   (unsigned long)handle_tlbl + sizeof(handle_tlbl));
-	flush_icache_range((unsigned long)handle_tlbs,
+	local_flush_icache_range((unsigned long)handle_tlbs,
 			   (unsigned long)handle_tlbs + sizeof(handle_tlbs));
-	flush_icache_range((unsigned long)handle_tlbm,
+	local_flush_icache_range((unsigned long)handle_tlbm,
 			   (unsigned long)handle_tlbm + sizeof(handle_tlbm));
 }
diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h
index d5c0f2fda51..03b1d69b142 100644
--- a/include/asm-mips/cacheflush.h
+++ b/include/asm-mips/cacheflush.h
@@ -63,6 +63,7 @@ static inline void flush_icache_page(struct vm_area_struct *vma,
 }
 
 extern void (*flush_icache_range)(unsigned long start, unsigned long end);
+extern void (*local_flush_icache_range)(unsigned long start, unsigned long end);
 
 extern void (*__flush_cache_vmap)(void);
 
-- 
GitLab


From 073828d078d3e55b23b2b5937a49dc1019c5907d Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Tue, 26 Aug 2008 21:29:58 +0900
Subject: [PATCH 814/869] [MIPS] TXx9: Fix txx9_pcode initialization

The txx9_pcode variable was introduced in commit
fe1c2bc64f65003b39f331a8e4b0d15b235a4afd ("TXx9: Add 64-bit support")
but was not initialized properly.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/txx9/generic/setup.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
index 0afe94c48fb..fe6bee09cec 100644
--- a/arch/mips/txx9/generic/setup.c
+++ b/arch/mips/txx9/generic/setup.c
@@ -53,6 +53,7 @@ txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size)
 		txx9_ce_res[i].name = txx9_ce_res_name[i];
 	}
 
+	txx9_pcode = pcode;
 	sprintf(txx9_pcode_str, "TX%x", pcode);
 	if (base) {
 		txx9_reg_res.start = base & 0xfffffffffULL;
-- 
GitLab


From 3885ec8ca29e5e33e9a5f0ae9dc849d798634ec9 Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Tue, 26 Aug 2008 22:30:41 +0900
Subject: [PATCH 815/869] [MIPS] TX39xx: Add missing local_flush_icache_range
 initialization

Commmit 59e39ecd933ba49eb6efe84cbfa5597a6c9ef18a ("Fix WARNING: at
kernel/smp.c:290") introduced local_flush_icache_range but lacks
initialization for some TX39 case.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/mm/c-tx39.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c
index 39c81820ce8..f7c8f9ce39c 100644
--- a/arch/mips/mm/c-tx39.c
+++ b/arch/mips/mm/c-tx39.c
@@ -391,6 +391,7 @@ void __cpuinit tx39_cache_init(void)
 		flush_cache_range = tx39_flush_cache_range;
 		flush_cache_page = tx39_flush_cache_page;
 		flush_icache_range = tx39_flush_icache_range;
+		local_flush_icache_range = tx39_flush_icache_range;
 
 		flush_cache_sigtramp = tx39_flush_cache_sigtramp;
 		local_flush_data_cache_page = local_tx39_flush_data_cache_page;
-- 
GitLab


From 0011036beeffeada15acd1936d67988de21ca65e Mon Sep 17 00:00:00 2001
From: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Date: Tue, 26 Aug 2008 22:34:57 +0900
Subject: [PATCH 816/869] [MIPS] Probe initrd header only if explicitly
 specified

Currently init_initrd() probes initrd header at the last page of kernel
image, but it is valid only if addinitrd was used.  If addinitrd was not
used, the area contains garbage so probing there might misdetect initrd
header (magic number is not strictly robust).

This patch introduces CONFIG_PROBE_INITRD_HEADER to explicitly enable this
probing.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/Kconfig        |  9 +++++++++
 arch/mips/kernel/setup.c | 33 ++++++++++++++++++---------------
 2 files changed, 27 insertions(+), 15 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4da736e2533..49896a2a1d7 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1886,6 +1886,15 @@ config STACKTRACE_SUPPORT
 
 source "init/Kconfig"
 
+config PROBE_INITRD_HEADER
+	bool "Probe initrd header created by addinitrd"
+	depends on BLK_DEV_INITRD
+	help
+	  Probe initrd header at the last page of kernel image.
+	  Say Y here if you are using arch/mips/boot/addinitrd.c to
+	  add initrd or initramfs image to the kernel image.
+	  Otherwise, say N.
+
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
 config HW_HAS_EISA
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 2aae76bce29..16f8edfe5cd 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -160,30 +160,33 @@ early_param("rd_size", rd_size_early);
 static unsigned long __init init_initrd(void)
 {
 	unsigned long end;
-	u32 *initrd_header;
 
 	/*
 	 * Board specific code or command line parser should have
 	 * already set up initrd_start and initrd_end. In these cases
 	 * perfom sanity checks and use them if all looks good.
 	 */
-	if (initrd_start && initrd_end > initrd_start)
-		goto sanitize;
+	if (!initrd_start || initrd_end <= initrd_start) {
+#ifdef CONFIG_PROBE_INITRD_HEADER
+		u32 *initrd_header;
 
-	/*
-	 * See if initrd has been added to the kernel image by
-	 * arch/mips/boot/addinitrd.c. In that case a header is
-	 * prepended to initrd and is made up by 8 bytes. The fisrt
-	 * word is a magic number and the second one is the size of
-	 * initrd.  Initrd start must be page aligned in any cases.
-	 */
-	initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
-	if (initrd_header[0] != 0x494E5244)
+		/*
+		 * See if initrd has been added to the kernel image by
+		 * arch/mips/boot/addinitrd.c. In that case a header is
+		 * prepended to initrd and is made up by 8 bytes. The first
+		 * word is a magic number and the second one is the size of
+		 * initrd.  Initrd start must be page aligned in any cases.
+		 */
+		initrd_header = __va(PAGE_ALIGN(__pa_symbol(&_end) + 8)) - 8;
+		if (initrd_header[0] != 0x494E5244)
+			goto disable;
+		initrd_start = (unsigned long)(initrd_header + 2);
+		initrd_end = initrd_start + initrd_header[1];
+#else
 		goto disable;
-	initrd_start = (unsigned long)(initrd_header + 2);
-	initrd_end = initrd_start + initrd_header[1];
+#endif
+	}
 
-sanitize:
 	if (initrd_start & ~PAGE_MASK) {
 		pr_err("initrd start must be page aligned\n");
 		goto disable;
-- 
GitLab


From 11d55d2cba6e867be8955e5ae011c54c556b849f Mon Sep 17 00:00:00 2001
From: Li Zefan <lizf@cn.fujitsu.com>
Date: Fri, 5 Sep 2008 14:00:18 -0700
Subject: [PATCH 817/869] res_counter: fix off-by-one bug in setting limit

I found we can no longer set limit to 0 with 2.6.27-rcX:
 # mount -t cgroup -omemory xxx /mnt
 # mkdir /mnt/0
 # echo 0 > /mnt/0/memory.limit_in_bytes
 bash: echo: write error: Device or resource busy

It turned out 'limit' can't be set to 'usage', which is wrong IMO.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/linux/res_counter.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index fdeadd9740d..271c1c2c9f6 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -166,7 +166,7 @@ static inline int res_counter_set_limit(struct res_counter *cnt,
 	int ret = -EBUSY;
 
 	spin_lock_irqsave(&cnt->lock, flags);
-	if (cnt->usage < limit) {
+	if (cnt->usage <= limit) {
 		cnt->limit = limit;
 		ret = 0;
 	}
-- 
GitLab


From 3cb5599a84c557c0dd9a19feb63a3788268cf249 Mon Sep 17 00:00:00 2001
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Date: Fri, 5 Sep 2008 14:00:19 -0700
Subject: [PATCH 818/869] forcedeth: fix kexec regression

Fix regression tracked as http://bugzilla.kernel.org/show_bug.cgi?id=11361
and caused by commit f735a2a1a4f2a0f5cd823ce323e82675990469e2 ("[netdrvr]
forcedeth: setup wake-on-lan before shutting down") that makes network
adapters integrated into the NVidia MCP55 chipsets fail to work in kexeced
kernels.  The problem appears to be that if the adapter is put into D3_hot
during ->shutdown(), it cannot be brought back into D0 after kexec (ref.
http://marc.info/?l=linux-kernel&m=121900062814967&w=4).  Therefore, only
put forcedeth into D3 during ->shutdown() if the system is to be powered
off.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Ayaz Abdulla <aabdulla@nvidia.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/net/forcedeth.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 331b86b01fa..0b6ecef9a84 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5975,10 +5975,12 @@ static void nv_shutdown(struct pci_dev *pdev)
 	if (netif_running(dev))
 		nv_close(dev);
 
-	pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
-	pci_enable_wake(pdev, PCI_D3cold, np->wolenabled);
 	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
+	if (system_state == SYSTEM_POWER_OFF) {
+		if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
+			pci_enable_wake(pdev, PCI_D3hot, np->wolenabled);
+		pci_set_power_state(pdev, PCI_D3hot);
+	}
 }
 #else
 #define nv_suspend NULL
-- 
GitLab


From 34a35bddb9382fc2663e3137875ee58928f7d704 Mon Sep 17 00:00:00 2001
From: Stanislaw Gruszka <stf_xl@wp.pl>
Date: Fri, 5 Sep 2008 14:00:22 -0700
Subject: [PATCH 819/869] atmel_lcdfb: fix oops in rmmod when framebuffer fails
 to register

If framebuffer registration failed in platform driver ->probe() callback,
dev_get_drvdata() points to freed memory region, but ->remove() function
try to use it and the following oops occurs:

Unable to handle kernel NULL pointer dereference at virtual address 00000228
pgd = c3a20000
[00000228] *pgd=23a2b031, *pte=00000000, *ppte=00000000
Internal error: Oops: 17 [#1]
Modules linked in: atmel_lcdfb(-) cfbcopyarea cfbimgblt cfbfillrect [last unloaded: atmel_lcdfb]
CPU: 0    Not tainted  (2.6.27-rc2 #116)
PC is at atmel_lcdfb_remove+0x14/0xf8 [atmel_lcdfb]
LR is at platform_drv_remove+0x20/0x24
pc : [<bf006bc4>]    lr : [<c0157d28>]    psr: a0000013
sp : c3a45e84  ip : c3a45ea0  fp : c3a45e9c
r10: 00000002  r9 : c3a44000  r8 : c0026c04
r7 : 00000880  r6 : c02bb228  r5 : 00000000  r4 : c02bb230
r3 : bf007e3c  r2 : c02bb230  r1 : 00000004  r0 : c02bb228
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005317f  Table: 23a20000  DAC: 00000015
Process rmmod (pid: 6799, stack limit = 0xc3a44260)
Stack: (0xc3a45e84 to 0xc3a46000)
5e80:          c02bb230 bf007e3c bf007e3c c3a45eac c3a45ea0 c0157d28 bf006bc0
5ea0: c3a45ec4 c3a45eb0 c0156d20 c0157d18 c02bb230 c02bb2d8 c3a45ee0 c3a45ec8
5ec0: c0156da8 c0156cb8 bf007e3c bf007ee0 c02c8e14 c3a45efc c3a45ee4 c0156018
5ee0: c0156d50 bf007e3c bf007ee0 00000000 c3a45f18 c3a45f00 c0157220 c0155f9c
5f00: 00000000 bf007ee0 bf008000 c3a45f28 c3a45f1c c0157e34 c01571ec c3a45f38
5f20: c3a45f2c bf006ba8 c0157e30 c3a45fa4 c3a45f3c c005772c bf006ba4 656d7461
5f40: 636c5f6c 00626664 c004c988 c3a45f80 c3a45f5c 00000000 c3a45fb0 00000000
5f60: ffffffff becaccd8 00000880 00000000 000a5e80 00000001 bf007ee0 00000880
5f80: c3a45f84 00000000 becaccd4 00000002 000003df 00000081 00000000 c3a45fa8
5fa0: c0026a60 c0057584 00000002 000003df 00900081 000a5e80 00000880 00000000
5fc0: becaccd4 00000002 000003df 00000000 000a5e80 00000001 00000002 0000005f
5fe0: 4004f5ec becacbe8 0001a158 4004f5fc 20000010 00900081 f9ffbadf 7bbfb2bb
Backtrace:
[<bf006bb0>] (atmel_lcdfb_remove+0x0/0xf8 [atmel_lcdfb]) from [<c0157d28>] (platform_drv_remove+0x20/0x24)
 r6:bf007e3c r5:bf007e3c r4:c02bb230
[<c0157d08>] (platform_drv_remove+0x0/0x24) from [<c0156d20>] (__device_release_driver+0x78/0x98)
[<c0156ca8>] (__device_release_driver+0x0/0x98) from [<c0156da8>] (driver_detach+0x68/0x90)
 r5:c02bb2d8 r4:c02bb230
[<c0156d40>] (driver_detach+0x0/0x90) from [<c0156018>] (bus_remove_driver+0x8c/0xb4)
 r6:c02c8e14 r5:bf007ee0 r4:bf007e3c
[<c0155f8c>] (bus_remove_driver+0x0/0xb4) from [<c0157220>] (driver_unregister+0x44/0x48)
 r6:00000000 r5:bf007ee0 r4:bf007e3c
[<c01571dc>] (driver_unregister+0x0/0x48) from [<c0157e34>] (platform_driver_unregister+0x14/0x18)
 r6:bf008000 r5:bf007ee0 r4:00000000
[<c0157e20>] (platform_driver_unregister+0x0/0x18) from [<bf006ba8>] (atmel_lcdfb_exit+0x14/0x1c [atmel_lcdfb])
[<bf006b94>] (atmel_lcdfb_exit+0x0/0x1c [atmel_lcdfb]) from [<c005772c>] (sys_delete_module+0x1b8/0x22c)
[<c0057574>] (sys_delete_module+0x0/0x22c) from [<c0026a60>] (ret_fast_syscall+0x0/0x2c)
 r7:00000081 r6:000003df r5:00000002 r4:becaccd4
Code: e92dd870 e24cb004 e59050c4 e1a06000 (e5954228)
---[ end trace 85476b184d9e68d8 ]---

This patch fixes the oops.

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/video/atmel_lcdfb.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 9c5925927ec..5a24c6411d3 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -939,7 +939,7 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	ret = register_framebuffer(info);
 	if (ret < 0) {
 		dev_err(dev, "failed to register framebuffer device: %d\n", ret);
-		goto free_cmap;
+		goto reset_drvdata;
 	}
 
 	/* add selected videomode to modelist */
@@ -955,7 +955,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 
 	return 0;
 
-
+reset_drvdata:
+	dev_set_drvdata(dev, NULL);
 free_cmap:
 	fb_dealloc_cmap(&info->cmap);
 unregister_irqs:
@@ -992,10 +993,11 @@ static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct fb_info *info = dev_get_drvdata(dev);
-	struct atmel_lcdfb_info *sinfo = info->par;
+	struct atmel_lcdfb_info *sinfo;
 
-	if (!sinfo)
+	if (!info || !info->par)
 		return 0;
+	sinfo = info->par;
 
 	cancel_work_sync(&sinfo->task);
 	exit_backlight(sinfo);
-- 
GitLab


From 22f30168d296dbb54a21ebad44c9d735bca6f67b Mon Sep 17 00:00:00 2001
From: Roland McGrath <roland@redhat.com>
Date: Fri, 5 Sep 2008 14:00:23 -0700
Subject: [PATCH 820/869] tracehook: comment pasto fixes

Fix some pasto's in comments in the new linux/tracehook.h and
asm-generic/syscall.h files.

Reported-by: Wenji Huang <wenji.huang@oracle.com>
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 include/asm-generic/syscall.h | 2 +-
 include/linux/tracehook.h     | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/include/asm-generic/syscall.h b/include/asm-generic/syscall.h
index abcf34c2fdc..ea8087b55ff 100644
--- a/include/asm-generic/syscall.h
+++ b/include/asm-generic/syscall.h
@@ -126,7 +126,7 @@ void syscall_get_arguments(struct task_struct *task, struct pt_regs *regs,
  * @args:	array of argument values to store
  *
  * Changes @n arguments to the system call starting with the @i'th argument.
- * @n'th argument to @val.  Argument @i gets value @args[0], and so on.
+ * Argument @i gets value @args[0], and so on.
  * An arch inline version is probably optimal when @i and @n are constants.
  *
  * It's only valid to call this when @task is stopped for tracing on
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index b48d8196957..6186a789d6c 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -272,7 +272,7 @@ static inline void tracehook_finish_clone(struct task_struct *child,
  * tracehook_report_clone_complete().  This must prevent the child from
  * self-reaping if tracehook_report_clone_complete() uses the @child
  * pointer; otherwise it might have died and been released by the time
- * tracehook_report_report_clone_complete() is called.
+ * tracehook_report_clone_complete() is called.
  *
  * Called with no locks held, but the child cannot run until this returns.
  */
-- 
GitLab


From 70bb08962ea9bd50797ae9f16b2493f5f7c65053 Mon Sep 17 00:00:00 2001
From: Andrew Morton <akpm@linux-foundation.org>
Date: Fri, 5 Sep 2008 14:00:24 -0700
Subject: [PATCH 821/869] drivers/mmc/card/block.c: fix refcount leak in
 mmc_block_open()

mmc_block_open() increments md->usage although it returns with -EROFS when
default mounting a MMC/SD card with write protect switch on.  This
reference counting bug prevents /dev/mmcblkX from being released on card
removal, and situation worsen with reinsertion until the minor number
range runs out.

Reported-by: <sasin@solomon-systech.com>
Acked-by: Pierre Ossman <drzeus-list@drzeus.cx>
Cc: <stable@kernel.org>		[2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/mmc/card/block.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 86dbb366415..6986f392624 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -103,8 +103,10 @@ static int mmc_blk_open(struct inode *inode, struct file *filp)
 			check_disk_change(inode->i_bdev);
 		ret = 0;
 
-		if ((filp->f_mode & FMODE_WRITE) && md->read_only)
+		if ((filp->f_mode & FMODE_WRITE) && md->read_only) {
+			mmc_blk_put(md);
 			ret = -EROFS;
+		}
 	}
 
 	return ret;
-- 
GitLab


From b74b06c5f6612a72298f37baa65460a59c26ca67 Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Fri, 15 Aug 2008 15:36:31 -0700
Subject: [PATCH 822/869] x86: boot: stub out unimplemented CPU feature words

The CPU feature detection code in the boot code is somewhat minimal,
and doesn't include all possible CPUID words.  In particular, it
doesn't contain the code for CPU feature words 2 (Transmeta),
3 (Linux-specific), 5 (VIA), or 7 (scattered).  Zero them out, so we
can still set those bits as known at compile time; in particular, this
allows creating a Linux-specific NOPL flag and have it required (and
therefore resolvable at compile time) in 64-bit mode.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/boot/cpucheck.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c
index 4b9ae7c5674..4d3ff037201 100644
--- a/arch/x86/boot/cpucheck.c
+++ b/arch/x86/boot/cpucheck.c
@@ -38,12 +38,12 @@ static const u32 req_flags[NCAPINTS] =
 {
 	REQUIRED_MASK0,
 	REQUIRED_MASK1,
-	REQUIRED_MASK2,
-	REQUIRED_MASK3,
+	0, /* REQUIRED_MASK2 not implemented in this file */
+	0, /* REQUIRED_MASK3 not implemented in this file */
 	REQUIRED_MASK4,
-	REQUIRED_MASK5,
+	0, /* REQUIRED_MASK5 not implemented in this file */
 	REQUIRED_MASK6,
-	REQUIRED_MASK7,
+	0, /* REQUIRED_MASK7 not implemented in this file */
 };
 
 #define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
-- 
GitLab


From b6734c35af028f06772c0b2c836c7d579e6d4dad Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 18 Aug 2008 17:39:32 -0700
Subject: [PATCH 823/869] x86: add NOPL as a synthetic CPU feature bit

The long noops ("NOPL") are supposed to be detected by family >= 6.
Unfortunately, several non-Intel x86 implementations, both hardware
and software, don't obey this dictum.  Instead, probe for NOPL
directly by executing a NOPL instruction and see if we get #UD.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/cpu/common.c        | 32 ++++++++++++++++++++++++-
 arch/x86/kernel/cpu/common_64.c     | 36 +++++++++++++++++++++++++++++
 arch/x86/kernel/cpu/feature_names.c |  3 ++-
 include/asm-x86/cpufeature.h        | 11 +++++----
 include/asm-x86/required-features.h |  8 ++++++-
 5 files changed, 82 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 80ab20d4fa3..0785b3c8d04 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -13,6 +13,7 @@
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
 #include <asm/apic.h>
@@ -341,6 +342,35 @@ static void __init early_cpu_detect(void)
 	early_get_cap(c);
 }
 
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  Hence, probe for it based on first
+ * principles.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+	const u32 nopl_signature = 0x888c53b1; /* Random number */
+	u32 has_nopl = nopl_signature;
+
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
+	if (c->x86 >= 6) {
+		asm volatile("\n"
+			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+			     "2:\n"
+			     "        .section .fixup,\"ax\"\n"
+			     "3:      xor %0,%0\n"
+			     "        jmp 2b\n"
+			     "        .previous\n"
+			     _ASM_EXTABLE(1b,3b)
+			     : "+a" (has_nopl));
+
+		if (has_nopl == nopl_signature)
+			set_cpu_cap(c, X86_FEATURE_NOPL);
+	}
+}
+
 static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 {
 	u32 tfms, xlvl;
@@ -395,8 +425,8 @@ static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
 		}
 
 		init_scattered_cpuid_features(c);
+		detect_nopl(c);
 	}
-
 }
 
 static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
index dd6e3f15017..c3afba5a81a 100644
--- a/arch/x86/kernel/cpu/common_64.c
+++ b/arch/x86/kernel/cpu/common_64.c
@@ -18,6 +18,7 @@
 #include <asm/mtrr.h>
 #include <asm/mce.h>
 #include <asm/pat.h>
+#include <asm/asm.h>
 #include <asm/numa.h>
 #ifdef CONFIG_X86_LOCAL_APIC
 #include <asm/mpspec.h>
@@ -215,6 +216,39 @@ static void __init early_cpu_support_print(void)
 	}
 }
 
+/*
+ * The NOPL instruction is supposed to exist on all CPUs with
+ * family >= 6, unfortunately, that's not true in practice because
+ * of early VIA chips and (more importantly) broken virtualizers that
+ * are not easy to detect.  Hence, probe for it based on first
+ * principles.
+ *
+ * Note: no 64-bit chip is known to lack these, but put the code here
+ * for consistency with 32 bits, and to make it utterly trivial to
+ * diagnose the problem should it ever surface.
+ */
+static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
+{
+	const u32 nopl_signature = 0x888c53b1; /* Random number */
+	u32 has_nopl = nopl_signature;
+
+	clear_cpu_cap(c, X86_FEATURE_NOPL);
+	if (c->x86 >= 6) {
+		asm volatile("\n"
+			     "1:      .byte 0x0f,0x1f,0xc0\n" /* nopl %eax */
+			     "2:\n"
+			     "        .section .fixup,\"ax\"\n"
+			     "3:      xor %0,%0\n"
+			     "        jmp 2b\n"
+			     "        .previous\n"
+			     _ASM_EXTABLE(1b,3b)
+			     : "+a" (has_nopl));
+
+		if (has_nopl == nopl_signature)
+			set_cpu_cap(c, X86_FEATURE_NOPL);
+	}
+}
+
 static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c);
 
 void __init early_cpu_init(void)
@@ -313,6 +347,8 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 		c->x86_phys_bits = eax & 0xff;
 	}
 
+	detect_nopl(c);
+
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
diff --git a/arch/x86/kernel/cpu/feature_names.c b/arch/x86/kernel/cpu/feature_names.c
index e43ad4ad4cb..c9017799497 100644
--- a/arch/x86/kernel/cpu/feature_names.c
+++ b/arch/x86/kernel/cpu/feature_names.c
@@ -39,7 +39,8 @@ const char * const x86_cap_flags[NCAPINTS*32] = {
 	NULL, NULL, NULL, NULL,
 	"constant_tsc", "up", NULL, "arch_perfmon",
 	"pebs", "bts", NULL, NULL,
-	"rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+	"rep_good", NULL, NULL, NULL,
+	"nopl", NULL, NULL, NULL,
 	NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
 
 	/* Intel-defined (#2) */
diff --git a/include/asm-x86/cpufeature.h b/include/asm-x86/cpufeature.h
index 762f6a6bc70..9489283a4bc 100644
--- a/include/asm-x86/cpufeature.h
+++ b/include/asm-x86/cpufeature.h
@@ -72,14 +72,15 @@
 #define X86_FEATURE_UP		(3*32+ 9) /* smp kernel running on up */
 #define X86_FEATURE_FXSAVE_LEAK (3*32+10) /* FXSAVE leaks FOP/FIP/FOP */
 #define X86_FEATURE_ARCH_PERFMON (3*32+11) /* Intel Architectural PerfMon */
-#define X86_FEATURE_PEBS	(3*32+12)  /* Precise-Event Based Sampling */
-#define X86_FEATURE_BTS		(3*32+13)  /* Branch Trace Store */
-#define X86_FEATURE_SYSCALL32	(3*32+14)  /* syscall in ia32 userspace */
-#define X86_FEATURE_SYSENTER32	(3*32+15)  /* sysenter in ia32 userspace */
+#define X86_FEATURE_PEBS	(3*32+12) /* Precise-Event Based Sampling */
+#define X86_FEATURE_BTS		(3*32+13) /* Branch Trace Store */
+#define X86_FEATURE_SYSCALL32	(3*32+14) /* syscall in ia32 userspace */
+#define X86_FEATURE_SYSENTER32	(3*32+15) /* sysenter in ia32 userspace */
 #define X86_FEATURE_REP_GOOD	(3*32+16) /* rep microcode works well on this CPU */
 #define X86_FEATURE_MFENCE_RDTSC (3*32+17) /* Mfence synchronizes RDTSC */
 #define X86_FEATURE_LFENCE_RDTSC (3*32+18) /* Lfence synchronizes RDTSC */
-#define X86_FEATURE_11AP	(3*32+19)  /* Bad local APIC aka 11AP */
+#define X86_FEATURE_11AP	(3*32+19) /* Bad local APIC aka 11AP */
+#define X86_FEATURE_NOPL	(3*32+20) /* The NOPL (0F 1F) instructions */
 
 /* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
 #define X86_FEATURE_XMM3	(4*32+ 0) /* Streaming SIMD Extensions-3 */
diff --git a/include/asm-x86/required-features.h b/include/asm-x86/required-features.h
index adec887dd7c..5c2ff4bc298 100644
--- a/include/asm-x86/required-features.h
+++ b/include/asm-x86/required-features.h
@@ -41,6 +41,12 @@
 # define NEED_3DNOW	0
 #endif
 
+#if defined(CONFIG_X86_P6_NOP) || defined(CONFIG_X86_64)
+# define NEED_NOPL	(1<<(X86_FEATURE_NOPL & 31))
+#else
+# define NEED_NOPL	0
+#endif
+
 #ifdef CONFIG_X86_64
 #define NEED_PSE	0
 #define NEED_MSR	(1<<(X86_FEATURE_MSR & 31))
@@ -67,7 +73,7 @@
 #define REQUIRED_MASK1	(NEED_LM|NEED_3DNOW)
 
 #define REQUIRED_MASK2	0
-#define REQUIRED_MASK3	0
+#define REQUIRED_MASK3	(NEED_NOPL)
 #define REQUIRED_MASK4	0
 #define REQUIRED_MASK5	0
 #define REQUIRED_MASK6	0
-- 
GitLab


From f31d731e4467e61de51d7f6d7115f3b712d9354c Mon Sep 17 00:00:00 2001
From: "H. Peter Anvin" <hpa@zytor.com>
Date: Mon, 18 Aug 2008 17:50:33 -0700
Subject: [PATCH 824/869] x86: use X86_FEATURE_NOPL in alternatives

Use X86_FEATURE_NOPL to determine if it is safe to use P6 NOPs in
alternatives.  Also, replace table and loop with simple if statement.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/kernel/alternative.c | 36 +++++++++++++----------------------
 1 file changed, 13 insertions(+), 23 deletions(-)

diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 2763cb37b55..65a0c1b4869 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -145,35 +145,25 @@ static const unsigned char *const p6_nops[ASM_NOP_MAX+1] = {
 extern char __vsyscall_0;
 const unsigned char *const *find_nop_table(void)
 {
-	return boot_cpu_data.x86_vendor != X86_VENDOR_INTEL ||
-	       boot_cpu_data.x86 < 6 ? k8_nops : p6_nops;
+	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+	    boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return k8_nops;
 }
 
 #else /* CONFIG_X86_64 */
 
-static const struct nop {
-	int cpuid;
-	const unsigned char *const *noptable;
-} noptypes[] = {
-	{ X86_FEATURE_K8, k8_nops },
-	{ X86_FEATURE_K7, k7_nops },
-	{ X86_FEATURE_P4, p6_nops },
-	{ X86_FEATURE_P3, p6_nops },
-	{ -1, NULL }
-};
-
 const unsigned char *const *find_nop_table(void)
 {
-	const unsigned char *const *noptable = intel_nops;
-	int i;
-
-	for (i = 0; noptypes[i].cpuid >= 0; i++) {
-		if (boot_cpu_has(noptypes[i].cpuid)) {
-			noptable = noptypes[i].noptable;
-			break;
-		}
-	}
-	return noptable;
+	if (boot_cpu_has(X86_FEATURE_K8))
+		return k8_nops;
+	else if (boot_cpu_has(X86_FEATURE_K7))
+		return k7_nops;
+	else if (boot_cpu_has(X86_FEATURE_NOPL))
+		return p6_nops;
+	else
+		return intel_nops;
 }
 
 #endif /* CONFIG_X86_64 */
-- 
GitLab


From 7300711e8c6824fcfbd42a126980ff50439d8dd0 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Sat, 6 Sep 2008 03:01:45 +0200
Subject: [PATCH 825/869] clockevents: broadcast fixup possible waiters

Until the C1E patches arrived there where no users of periodic broadcast
before switching to oneshot mode. Now we need to trigger a possible
waiter for a periodic broadcast when switching to oneshot mode.
Otherwise we can starve them for ever.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 kernel/time/tick-broadcast.c | 37 +++++++++++++++++++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)

diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c
index 2bc1f046151..2f5a38294bf 100644
--- a/kernel/time/tick-broadcast.c
+++ b/kernel/time/tick-broadcast.c
@@ -491,6 +491,18 @@ static void tick_broadcast_clear_oneshot(int cpu)
 	cpu_clear(cpu, tick_broadcast_oneshot_mask);
 }
 
+static void tick_broadcast_init_next_event(cpumask_t *mask, ktime_t expires)
+{
+	struct tick_device *td;
+	int cpu;
+
+	for_each_cpu_mask_nr(cpu, *mask) {
+		td = &per_cpu(tick_cpu_device, cpu);
+		if (td->evtdev)
+			td->evtdev->next_event = expires;
+	}
+}
+
 /**
  * tick_broadcast_setup_oneshot - setup the broadcast device
  */
@@ -498,9 +510,32 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc)
 {
 	/* Set it up only once ! */
 	if (bc->event_handler != tick_handle_oneshot_broadcast) {
+		int was_periodic = bc->mode == CLOCK_EVT_MODE_PERIODIC;
+		int cpu = smp_processor_id();
+		cpumask_t mask;
+
 		bc->event_handler = tick_handle_oneshot_broadcast;
 		clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT);
-		bc->next_event.tv64 = KTIME_MAX;
+
+		/* Take the do_timer update */
+		tick_do_timer_cpu = cpu;
+
+		/*
+		 * We must be careful here. There might be other CPUs
+		 * waiting for periodic broadcast. We need to set the
+		 * oneshot_mask bits for those and program the
+		 * broadcast device to fire.
+		 */
+		mask = tick_broadcast_mask;
+		cpu_clear(cpu, mask);
+		cpus_or(tick_broadcast_oneshot_mask,
+			tick_broadcast_oneshot_mask, mask);
+
+		if (was_periodic && !cpus_empty(mask)) {
+			tick_broadcast_init_next_event(&mask, tick_next_period);
+			tick_broadcast_set_event(tick_next_period, 1);
+		} else
+			bc->next_event.tv64 = KTIME_MAX;
 	}
 }
 
-- 
GitLab


From f7676254f179eac6b5244a80195ec8ae0e9d4606 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Sat, 6 Sep 2008 03:03:32 +0200
Subject: [PATCH 826/869] x86: HPET fix moronic 32/64bit thinko

We use the HPET only in 32bit mode because:
1) some HPETs are 32bit only
2) on i386 there is no way to read/write the HPET atomic 64bit wide

The HPET code unification done by the "moron of the year" did
not take into account that unsigned long is different on 32 and
64 bit.

This thinko results in a possible endless loop in the clockevents
code, when the return comparison fails due to the 64bit/332bit
unawareness.

unsigned long cnt = (u32) hpet_read() + delta can wrap over 32bit.
but the final compare will fail and return -ETIME causing endless
loops.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/hpet.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 2256315416d..801497a16e0 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -270,15 +270,15 @@ static void hpet_legacy_set_mode(enum clock_event_mode mode,
 }
 
 static int hpet_legacy_next_event(unsigned long delta,
-			   struct clock_event_device *evt)
+				  struct clock_event_device *evt)
 {
-	unsigned long cnt;
+	u32 cnt;
 
 	cnt = hpet_readl(HPET_COUNTER);
-	cnt += delta;
+	cnt += (u32) delta;
 	hpet_writel(cnt, HPET_T0_CMP);
 
-	return ((long)(hpet_readl(HPET_COUNTER) - cnt ) > 0) ? -ETIME : 0;
+	return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 }
 
 /*
-- 
GitLab


From 72d43d9bc9210d24d09202eaf219eac09e17b339 Mon Sep 17 00:00:00 2001
From: Thomas Gleixner <tglx@linutronix.de>
Date: Sat, 6 Sep 2008 03:06:08 +0200
Subject: [PATCH 827/869] x86: HPET: read back compare register before reading
 counter

After fixing the u32 thinko I sill had occasional hickups on ATI chipsets
with small deltas. There seems to be a delay between writing the compare
register and the transffer to the internal register which triggers the
interrupt. Reading back the value makes sure, that it hit the internal
match register befor we compare against the counter value.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 arch/x86/kernel/hpet.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 801497a16e0..73deaffadd0 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -278,6 +278,13 @@ static int hpet_legacy_next_event(unsigned long delta,
 	cnt += (u32) delta;
 	hpet_writel(cnt, HPET_T0_CMP);
 
+	/*
+	 * We need to read back the CMP register to make sure that
+	 * what we wrote hit the chip before we compare it to the
+	 * counter.
+	 */
+	WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt);
+
 	return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 }
 
-- 
GitLab


From 8a656496b21efd95fd55b66e0601c5ad41f9b156 Mon Sep 17 00:00:00 2001
From: Takashi Iwai <tiwai@suse.de>
Date: Sat, 6 Sep 2008 11:43:41 +0200
Subject: [PATCH 828/869] Fix CONFIG_AC97_BUS dependency

CONFIG_AC97_BUS is used from both sound and ucb1400 drivers.
The recent change in Kconfig introduced the exclusive dependency on
CONFIG_SOUND, and disabled the ucb1400 build without sound.
This patch makes CONFIG_AC97_BUS independent.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
---
 sound/Kconfig | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/sound/Kconfig b/sound/Kconfig
index a37bee094eb..8ebf512ced6 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -91,6 +91,9 @@ endif # SOUND_PRIME
 
 endif # !M68K
 
+endif # SOUND
+
+# AC97_BUS is used from both sound and ucb1400
 config AC97_BUS
 	tristate
 	help
@@ -99,4 +102,3 @@ config AC97_BUS
 	  sound although they're sharing the AC97 bus. Concerned drivers
 	  should "select" this.
 
-endif # SOUND
-- 
GitLab


From 1ad77a876da48331451698cc4172c90ab9b6372f Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Fri, 5 Sep 2008 13:17:11 +0100
Subject: [PATCH 829/869] [ARM] 5241/1: provide ioremap_wc()

This patch provides an ARM implementation of ioremap_wc().

We use different page table attributes depending on which CPU we
are running on:

- Non-XScale ARMv5 and earlier systems: The ARMv5 ARM documents four
  possible mapping types (CB=00/01/10/11).  We can't use any of the
  cached memory types (CB=10/11), since that breaks coherency with
  peripheral devices.  Both CB=00 and CB=01 are suitable for _wc, and
  CB=01 (Uncached/Buffered) allows the hardware more freedom than
  CB=00, so we'll use that.

  (The ARMv5 ARM seems to suggest that CB=01 is allowed to delay stores
  but isn't allowed to merge them, but there is no other mapping type
  we can use that allows the hardware to delay and merge stores, so
  we'll go with CB=01.)

- XScale v1/v2 (ARMv5): same as the ARMv5 case above, with the slight
  difference that on these platforms, CB=01 actually _does_ allow
  merging stores.  (If you want noncoalescing bufferable behavior
  on Xscale v1/v2, you need to use XCB=101.)

- Xscale v3 (ARMv5) and ARMv6+: on these systems, we use TEXCB=00100
  mappings (Inner/Outer Uncacheable in xsc3 parlance, Uncached Normal
  in ARMv6 parlance).

  The ARMv6 ARM explicitly says that any accesses to Normal memory can
  be merged, which makes Normal memory more suitable for _wc mappings
  than Device or Strongly Ordered memory, as the latter two mapping
  types are guaranteed to maintain transaction number, size and order.
  We use the Uncached variety of Normal mappings for the same reason
  that we can't use C=1 mappings on ARMv5.

  The xsc3 Architecture Specification documents TEXCB=00100 as being
  Uncacheable and allowing coalescing of writes, which is also just
  what we need.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 arch/arm/include/asm/io.h       |  5 ++++-
 arch/arm/include/asm/mach/map.h | 14 +++++++-------
 arch/arm/mm/mmu.c               | 20 ++++++++++++++++++++
 3 files changed, 31 insertions(+), 8 deletions(-)

diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
index 94a95d7fafd..71934856fc2 100644
--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
@@ -61,8 +61,9 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 #define MT_DEVICE_NONSHARED	1
 #define MT_DEVICE_CACHED	2
 #define MT_DEVICE_IXP2000	3
+#define MT_DEVICE_WC		4
 /*
- * types 4 onwards can be found in asm/mach/map.h and are undefined
+ * types 5 onwards can be found in asm/mach/map.h and are undefined
  * for ioremap
  */
 
@@ -215,11 +216,13 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
 #define ioremap(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE)
 #define ioremap_nocache(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE)
 #define ioremap_cached(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE_WC)
 #define iounmap(cookie)			__iounmap(cookie)
 #else
 #define ioremap(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_nocache(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE)
 #define ioremap_cached(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
+#define ioremap_wc(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE_WC)
 #define iounmap(cookie)			__arch_iounmap(cookie)
 #endif
 
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index 06f583b1399..9eb936e49cc 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -18,13 +18,13 @@ struct map_desc {
 	unsigned int type;
 };
 
-/* types 0-3 are defined in asm/io.h */
-#define MT_CACHECLEAN		4
-#define MT_MINICLEAN		5
-#define MT_LOW_VECTORS		6
-#define MT_HIGH_VECTORS		7
-#define MT_MEMORY		8
-#define MT_ROM			9
+/* types 0-4 are defined in asm/io.h */
+#define MT_CACHECLEAN		5
+#define MT_MINICLEAN		6
+#define MT_LOW_VECTORS		7
+#define MT_HIGH_VECTORS		8
+#define MT_MEMORY		9
+#define MT_ROM			10
 
 #define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
 #define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 25d9a11eb61..a713e40e1f1 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -211,6 +211,12 @@ static struct mem_type mem_types[] = {
 				  PMD_SECT_TEX(1),
 		.domain		= DOMAIN_IO,
 	},
+	[MT_DEVICE_WC] = {	/* ioremap_wc */
+		.prot_pte	= PROT_PTE_DEVICE,
+		.prot_l1	= PMD_TYPE_TABLE,
+		.prot_sect	= PROT_SECT_DEVICE,
+		.domain		= DOMAIN_IO,
+	},
 	[MT_CACHECLEAN] = {
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_XN,
 		.domain    = DOMAIN_KERNEL,
@@ -272,6 +278,20 @@ static void __init build_mem_type_table(void)
 		ecc_mask = 0;
 	}
 
+	/*
+	 * On non-Xscale3 ARMv5-and-older systems, use CB=01
+	 * (Uncached/Buffered) for ioremap_wc() mappings.  On XScale3
+	 * and ARMv6+, use TEXCB=00100 mappings (Inner/Outer Uncacheable
+	 * in xsc3 parlance, Uncached Normal in ARMv6 parlance).
+	 */
+	if (cpu_is_xsc3() || cpu_arch >= CPU_ARCH_ARMv6) {
+		mem_types[MT_DEVICE_WC].prot_pte_ext |= PTE_EXT_TEX(1);
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_TEX(1);
+	} else {
+		mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_BUFFERABLE;
+		mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_BUFFERABLE;
+	}
+
 	/*
 	 * ARMv5 and lower, bit 4 must be set for page tables.
 	 * (was: cache "update-able on write" bit on ARM610)
-- 
GitLab


From 4ff4b9e19a80b73959ebeb28d1df40176686f0a8 Mon Sep 17 00:00:00 2001
From: "Maciej W. Rozycki" <macro@linux-mips.org>
Date: Fri, 5 Sep 2008 14:05:31 -0700
Subject: [PATCH 830/869] ntp: fix calculation of the next jiffie to trigger
 RTC sync

We have a bug in the calculation of the next jiffie to trigger the RTC
synchronisation.  The aim here is to run sync_cmos_clock() as close as
possible to the middle of a second.  Which means we want this function to
be called less than or equal to half a jiffie away from when now.tv_nsec
equals 5e8 (500000000).

If this is not the case for a given call to the function, for this purpose
instead of updating the RTC we calculate the offset in nanoseconds to the
next point in time where now.tv_nsec will be equal 5e8.  The calculated
offset is then converted to jiffies as these are the unit used by the
timer.

Hovewer timespec_to_jiffies() used here uses a ceil()-type rounding mode,
where the resulting value is rounded up.  As a result the range of
now.tv_nsec when the timer will trigger is from 5e8 to 5e8 + TICK_NSEC
rather than the desired 5e8 - TICK_NSEC / 2 to 5e8 + TICK_NSEC / 2.

As a result if for example sync_cmos_clock() happens to be called at the
time when now.tv_nsec is between 5e8 + TICK_NSEC / 2 and 5e8 to 5e8 +
TICK_NSEC, it will simply be rescheduled HZ jiffies later, falling in the
same range of now.tv_nsec again.  Similarly for cases offsetted by an
integer multiple of TICK_NSEC.

This change addresses the problem by subtracting TICK_NSEC / 2 from the
nanosecond offset to the next point in time where now.tv_nsec will be
equal 5e8, effectively shifting the following rounding in
timespec_to_jiffies() so that it produces a rounded-to-nearest result.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 kernel/time/ntp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index 5125ddd8196..1ad46f3df6e 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -245,7 +245,7 @@ static void sync_cmos_clock(unsigned long dummy)
 	if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
 		fail = update_persistent_clock(now);
 
-	next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec;
+	next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec - (TICK_NSEC / 2);
 	if (next.tv_nsec <= 0)
 		next.tv_nsec += NSEC_PER_SEC;
 
-- 
GitLab


From dfdf748a61a21b7397b9f57c83de722de71dc56a Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Fri, 5 Sep 2008 14:05:33 -0700
Subject: [PATCH 831/869] clocksource, acpi_pm.c: use proper read function also
 in errata mode

On all hardware (some Intel ICH4, PIIX4 and PIIX4E chipsets) affected by a
hardware errata there's about a 4.2% chance that initialization of the
ACPI PMTMR fails.  On those chipsets, we need to read out the timer value
at least three times to get a correct result, for every once in a while
(i.e.  within a 3 ns window every 69.8 ns) the read returns a bogus
result.  During normal operation we work around this issue, but during
initialization reading a bogus value may lead to -EINVAL even though the
hardware is usable.

Thanks to Andreas Mohr for spotting this issue.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/clocksource/acpi_pm.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 5ca1d80de18..860d033bc74 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -151,13 +151,13 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_LE,
  */
 static int verify_pmtmr_rate(void)
 {
-	u32 value1, value2;
+	cycle_t value1, value2;
 	unsigned long count, delta;
 
 	mach_prepare_counter();
-	value1 = read_pmtmr();
+	value1 = clocksource_acpi_pm.read();
 	mach_countup(&count);
-	value2 = read_pmtmr();
+	value2 = clocksource_acpi_pm.read();
 	delta = (value2 - value1) & ACPI_PM_MASK;
 
 	/* Check that the PMTMR delta is within 5% of what we expect */
@@ -177,7 +177,7 @@ static int verify_pmtmr_rate(void)
 
 static int __init init_acpi_pm_clocksource(void)
 {
-	u32 value1, value2;
+	cycle_t value1, value2;
 	unsigned int i;
 
 	if (!pmtmr_ioport)
@@ -187,9 +187,9 @@ static int __init init_acpi_pm_clocksource(void)
 						clocksource_acpi_pm.shift);
 
 	/* "verify" this timing source: */
-	value1 = read_pmtmr();
+	value1 = clocksource_acpi_pm.read();
 	for (i = 0; i < 10000; i++) {
-		value2 = read_pmtmr();
+		value2 = clocksource_acpi_pm.read();
 		if (value2 == value1)
 			continue;
 		if (value2 > value1)
@@ -197,11 +197,11 @@ static int __init init_acpi_pm_clocksource(void)
 		if ((value2 < value1) && ((value2) < 0xFFF))
 			goto pm_good;
 		printk(KERN_INFO "PM-Timer had inconsistent results:"
-			" 0x%#x, 0x%#x - aborting.\n", value1, value2);
+			" 0x%#llx, 0x%#llx - aborting.\n", value1, value2);
 		return -EINVAL;
 	}
 	printk(KERN_INFO "PM-Timer had no reasonable result:"
-			" 0x%#x - aborting.\n", value1);
+			" 0x%#llx - aborting.\n", value1);
 	return -ENODEV;
 
 pm_good:
-- 
GitLab


From 4ab6a219113197425ac112e35e1ec8062c69888e Mon Sep 17 00:00:00 2001
From: Dominik Brodowski <linux@dominikbrodowski.net>
Date: Fri, 5 Sep 2008 14:05:35 -0700
Subject: [PATCH 832/869] clocksource, acpi_pm.c: check for monotonicity

The current check for monotonicity is way too weak: Andreas Mohr reports (
http://lkml.org/lkml/2008/8/10/77 ) that on one of his test systems the
current check only triggers in 50% of all cases, leading to catastrophic
timer behaviour.  To fix this issue, expand the check for monotonicity by
doing ten consecutive tests instead of one.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/clocksource/acpi_pm.c | 46 ++++++++++++++++++++++-------------
 1 file changed, 29 insertions(+), 17 deletions(-)

diff --git a/drivers/clocksource/acpi_pm.c b/drivers/clocksource/acpi_pm.c
index 860d033bc74..4eee533f3f4 100644
--- a/drivers/clocksource/acpi_pm.c
+++ b/drivers/clocksource/acpi_pm.c
@@ -21,6 +21,7 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+#include <linux/delay.h>
 #include <asm/io.h>
 
 /*
@@ -175,10 +176,13 @@ static int verify_pmtmr_rate(void)
 #define verify_pmtmr_rate() (0)
 #endif
 
+/* Number of monotonicity checks to perform during initialization */
+#define ACPI_PM_MONOTONICITY_CHECKS 10
+
 static int __init init_acpi_pm_clocksource(void)
 {
 	cycle_t value1, value2;
-	unsigned int i;
+	unsigned int i, j, good = 0;
 
 	if (!pmtmr_ioport)
 		return -ENODEV;
@@ -187,24 +191,32 @@ static int __init init_acpi_pm_clocksource(void)
 						clocksource_acpi_pm.shift);
 
 	/* "verify" this timing source: */
-	value1 = clocksource_acpi_pm.read();
-	for (i = 0; i < 10000; i++) {
-		value2 = clocksource_acpi_pm.read();
-		if (value2 == value1)
-			continue;
-		if (value2 > value1)
-			goto pm_good;
-		if ((value2 < value1) && ((value2) < 0xFFF))
-			goto pm_good;
-		printk(KERN_INFO "PM-Timer had inconsistent results:"
-			" 0x%#llx, 0x%#llx - aborting.\n", value1, value2);
-		return -EINVAL;
+	for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
+		value1 = clocksource_acpi_pm.read();
+		for (i = 0; i < 10000; i++) {
+			value2 = clocksource_acpi_pm.read();
+			if (value2 == value1)
+				continue;
+			if (value2 > value1)
+				good++;
+				break;
+			if ((value2 < value1) && ((value2) < 0xFFF))
+				good++;
+				break;
+			printk(KERN_INFO "PM-Timer had inconsistent results:"
+			       " 0x%#llx, 0x%#llx - aborting.\n",
+			       value1, value2);
+			return -EINVAL;
+		}
+		udelay(300 * i);
+	}
+
+	if (good != ACPI_PM_MONOTONICITY_CHECKS) {
+		printk(KERN_INFO "PM-Timer failed consistency check "
+		       " (0x%#llx) - aborting.\n", value1);
+		return -ENODEV;
 	}
-	printk(KERN_INFO "PM-Timer had no reasonable result:"
-			" 0x%#llx - aborting.\n", value1);
-	return -ENODEV;
 
-pm_good:
 	if (verify_pmtmr_rate() != 0)
 		return -ENODEV;
 
-- 
GitLab


From 12cf105cd66d95cf32c73cfa847a50bd1b700f23 Mon Sep 17 00:00:00 2001
From: Krzysztof Helt <krzysztof.h1@wp.pl>
Date: Thu, 4 Sep 2008 21:09:43 +0200
Subject: [PATCH 833/869] x86: delay early cpu initialization until cpuid is
 done

Move early cpu initialization after cpu early get cap so the
early cpu initialization can fix up cpu caps.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/common.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 0785b3c8d04..8aab8517642 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -335,11 +335,11 @@ static void __init early_cpu_detect(void)
 
 	get_cpu_vendor(c, 1);
 
+	early_get_cap(c);
+
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
-
-	early_get_cap(c);
 }
 
 /*
-- 
GitLab


From dd786dd12c99634055a9066f25ea957f29991c22 Mon Sep 17 00:00:00 2001
From: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Thu, 4 Sep 2008 21:09:43 +0200
Subject: [PATCH 834/869] x86: move mtrr cpu cap setting early in
 early_init_xxxx

Krzysztof Helt found MTRR is not detected on k6-2

root cause:
	we moved mtrr_bp_init() early for mtrr trimming,
and in early_detect we only read the CPU capability from cpuid,
so some cpu doesn't have that bit in cpuid.

So we need to add early_init_xxxx to preset those bit before mtrr_bp_init
for those earlier cpus.

this patch is for v2.6.27

Reported-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/amd.c     |  9 +++++----
 arch/x86/kernel/cpu/centaur.c | 11 +++++++++++
 arch/x86/kernel/cpu/cyrix.c   | 32 ++++++++++++++++++++++++++++----
 3 files changed, 44 insertions(+), 8 deletions(-)

diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index cae9cabc303..18514ed2610 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -31,6 +31,11 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 		if (c->x86_power & (1<<8))
 			set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 	}
+
+	/*  Set MTRR capability flag if appropriate */
+	if (c->x86_model == 13 || c->x86_model == 9 ||
+	   (c->x86_model == 8 && c->x86_mask >= 8))
+		set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
@@ -166,10 +171,6 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c)
 						mbytes);
 				}
 
-				/*  Set MTRR capability flag if appropriate */
-				if (c->x86_model == 13 || c->x86_model == 9 ||
-				   (c->x86_model == 8 && c->x86_mask >= 8))
-					set_cpu_cap(c, X86_FEATURE_K6_MTRR);
 				break;
 			}
 
diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c
index e0f45edd6a5..a0534c04d38 100644
--- a/arch/x86/kernel/cpu/centaur.c
+++ b/arch/x86/kernel/cpu/centaur.c
@@ -314,6 +314,16 @@ enum {
 		EAMD3D		= 1<<20,
 };
 
+static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
+{
+	switch (c->x86) {
+	case 5:
+		/* Emulate MTRRs using Centaur's MCR. */
+		set_cpu_cap(c, X86_FEATURE_CENTAUR_MCR);
+		break;
+	}
+}
+
 static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
 {
 
@@ -462,6 +472,7 @@ centaur_size_cache(struct cpuinfo_x86 *c, unsigned int size)
 static struct cpu_dev centaur_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Centaur",
 	.c_ident	= { "CentaurHauls" },
+	.c_early_init	= early_init_centaur,
 	.c_init		= init_centaur,
 	.c_size_cache	= centaur_size_cache,
 };
diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c
index e710a21bb6e..898a5a2002e 100644
--- a/arch/x86/kernel/cpu/cyrix.c
+++ b/arch/x86/kernel/cpu/cyrix.c
@@ -15,13 +15,11 @@
 /*
  * Read NSC/Cyrix DEVID registers (DIR) to get more detailed info. about the CPU
  */
-static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+static void __cpuinit __do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 {
 	unsigned char ccr2, ccr3;
-	unsigned long flags;
 
 	/* we test for DEVID by checking whether CCR3 is writable */
-	local_irq_save(flags);
 	ccr3 = getCx86(CX86_CCR3);
 	setCx86(CX86_CCR3, ccr3 ^ 0x80);
 	getCx86(0xc0);   /* dummy to change bus */
@@ -44,9 +42,16 @@ static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
 		*dir0 = getCx86(CX86_DIR0);
 		*dir1 = getCx86(CX86_DIR1);
 	}
-	local_irq_restore(flags);
 }
 
+static void __cpuinit do_cyrix_devid(unsigned char *dir0, unsigned char *dir1)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	__do_cyrix_devid(dir0, dir1);
+	local_irq_restore(flags);
+}
 /*
  * Cx86_dir0_msb is a HACK needed by check_cx686_cpuid/slop in bugs.h in
  * order to identify the Cyrix CPU model after we're out of setup.c
@@ -161,6 +166,24 @@ static void __cpuinit geode_configure(void)
 	local_irq_restore(flags);
 }
 
+static void __cpuinit early_init_cyrix(struct cpuinfo_x86 *c)
+{
+	unsigned char dir0, dir0_msn, dir1 = 0;
+
+	__do_cyrix_devid(&dir0, &dir1);
+	dir0_msn = dir0 >> 4; /* identifies CPU "family"   */
+
+	switch (dir0_msn) {
+	case 3: /* 6x86/6x86L */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	case 5: /* 6x86MX/M II */
+		/* Emulate MTRRs using Cyrix's ARRs. */
+		set_cpu_cap(c, X86_FEATURE_CYRIX_ARR);
+		break;
+	}
+}
 
 static void __cpuinit init_cyrix(struct cpuinfo_x86 *c)
 {
@@ -416,6 +439,7 @@ static void __cpuinit cyrix_identify(struct cpuinfo_x86 *c)
 static struct cpu_dev cyrix_cpu_dev __cpuinitdata = {
 	.c_vendor	= "Cyrix",
 	.c_ident	= { "CyrixInstead" },
+	.c_early_init	= early_init_cyrix,
 	.c_init		= init_cyrix,
 	.c_identify	= cyrix_identify,
 };
-- 
GitLab


From dfb512ec4834116124da61d6c1ee10fd0aa32bd6 Mon Sep 17 00:00:00 2001
From: Max Krasnyansky <maxk@qualcomm.com>
Date: Fri, 29 Aug 2008 13:11:41 -0700
Subject: [PATCH 835/869] sched: arch_reinit_sched_domains() must destroy
 domains to force rebuild

What I realized recently is that calling rebuild_sched_domains() in
arch_reinit_sched_domains() by itself is not enough when cpusets are enabled.
partition_sched_domains() code is trying to avoid unnecessary domain rebuilds
and will not actually rebuild anything if new domain masks match the old ones.

What this means is that doing
     echo 1 > /sys/devices/system/cpu/sched_mc_power_savings
on a system with cpusets enabled will not take affect untill something changes
in the cpuset setup (ie new sets created or deleted).

This patch fixes restore correct behaviour where domains must be rebuilt in
order to enable MC powersaving flags.

Test on quad-core Core2 box with both CONFIG_CPUSETS and !CONFIG_CPUSETS.
Also tested on dual-core Core2 laptop. Lockdep is happy and things are working
as expected.

Signed-off-by: Max Krasnyansky <maxk@qualcomm.com>
Tested-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 include/linux/cpuset.h |  2 +-
 kernel/sched.c         | 19 +++++++++++++------
 2 files changed, 14 insertions(+), 7 deletions(-)

diff --git a/include/linux/cpuset.h b/include/linux/cpuset.h
index e8f450c499b..2691926fb50 100644
--- a/include/linux/cpuset.h
+++ b/include/linux/cpuset.h
@@ -160,7 +160,7 @@ static inline int current_cpuset_is_being_rebound(void)
 
 static inline void rebuild_sched_domains(void)
 {
-	partition_sched_domains(0, NULL, NULL);
+	partition_sched_domains(1, NULL, NULL);
 }
 
 #endif /* !CONFIG_CPUSETS */
diff --git a/kernel/sched.c b/kernel/sched.c
index d601fb0406c..d72ee9a0eac 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -7589,24 +7589,27 @@ static int dattrs_equal(struct sched_domain_attr *cur, int idx_cur,
  * and partition_sched_domains() will fallback to the single partition
  * 'fallback_doms', it also forces the domains to be rebuilt.
  *
+ * If doms_new==NULL it will be replaced with cpu_online_map.
+ * ndoms_new==0 is a special case for destroying existing domains.
+ * It will not create the default domain.
+ *
  * Call with hotplug lock held
  */
 void partition_sched_domains(int ndoms_new, cpumask_t *doms_new,
 			     struct sched_domain_attr *dattr_new)
 {
-	int i, j;
+	int i, j, n;
 
 	mutex_lock(&sched_domains_mutex);
 
 	/* always unregister in case we don't destroy any domains */
 	unregister_sched_domain_sysctl();
 
-	if (doms_new == NULL)
-		ndoms_new = 0;
+	n = doms_new ? ndoms_new : 0;
 
 	/* Destroy deleted domains */
 	for (i = 0; i < ndoms_cur; i++) {
-		for (j = 0; j < ndoms_new; j++) {
+		for (j = 0; j < n; j++) {
 			if (cpus_equal(doms_cur[i], doms_new[j])
 			    && dattrs_equal(dattr_cur, i, dattr_new, j))
 				goto match1;
@@ -7619,7 +7622,6 @@ match1:
 
 	if (doms_new == NULL) {
 		ndoms_cur = 0;
-		ndoms_new = 1;
 		doms_new = &fallback_doms;
 		cpus_andnot(doms_new[0], cpu_online_map, cpu_isolated_map);
 		dattr_new = NULL;
@@ -7656,8 +7658,13 @@ match2:
 int arch_reinit_sched_domains(void)
 {
 	get_online_cpus();
+
+	/* Destroy domains first to force the rebuild */
+	partition_sched_domains(0, NULL, NULL);
+
 	rebuild_sched_domains();
 	put_online_cpus();
+
 	return 0;
 }
 
@@ -7741,7 +7748,7 @@ static int update_sched_domains(struct notifier_block *nfb,
 	case CPU_ONLINE_FROZEN:
 	case CPU_DEAD:
 	case CPU_DEAD_FROZEN:
-		partition_sched_domains(0, NULL, NULL);
+		partition_sched_domains(1, NULL, NULL);
 		return NOTIFY_OK;
 
 	default:
-- 
GitLab


From e4a6be4d2850da032a782b5296c07dfdf583af86 Mon Sep 17 00:00:00 2001
From: Eduardo Habkost <ehabkost@redhat.com>
Date: Thu, 24 Jul 2008 12:15:45 -0300
Subject: [PATCH 836/869] x86, xen: Use native_pte_flags instead of
 native_pte_val for .pte_flags

Using native_pte_val triggers the BUG_ON() in the paravirt_ops
version of pte_flags().

Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/xen/enlighten.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 9ff6e3cbf08..a4e201b47f6 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1324,7 +1324,7 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.ptep_modify_prot_commit = __ptep_modify_prot_commit,
 
 	.pte_val = xen_pte_val,
-	.pte_flags = native_pte_val,
+	.pte_flags = native_pte_flags,
 	.pgd_val = xen_pgd_val,
 
 	.make_pte = xen_make_pte,
-- 
GitLab


From d04ec773d7ca1bbc05a2768be95c1cebe2b07757 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 6 Aug 2008 10:27:30 +0200
Subject: [PATCH 837/869] x86: pda_init(): fix memory leak when using CPU
 hotplug

pda->irqstackptr is allocated whenever a CPU is set online.
But it is never freed. This results in a memory leak of 16K
for each CPU offline/online cycle.

Fix is to allocate pda->irqstackptr only once.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: akpm@linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/common_64.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
index c3afba5a81a..4f2eeb5652e 100644
--- a/arch/x86/kernel/cpu/common_64.c
+++ b/arch/x86/kernel/cpu/common_64.c
@@ -529,17 +529,20 @@ void pda_init(int cpu)
 		/* others are initialized in smpboot.c */
 		pda->pcurrent = &init_task;
 		pda->irqstackptr = boot_cpu_stack;
+		pda->irqstackptr += IRQSTACKSIZE - 64;
 	} else {
-		pda->irqstackptr = (char *)
-			__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
-		if (!pda->irqstackptr)
-			panic("cannot allocate irqstack for cpu %d", cpu);
+		if (!pda->irqstackptr) {
+			pda->irqstackptr = (char *)
+				__get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
+			if (!pda->irqstackptr)
+				panic("cannot allocate irqstack for cpu %d",
+				      cpu);
+			pda->irqstackptr += IRQSTACKSIZE - 64;
+		}
 
 		if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
 			pda->nodenumber = cpu_to_node(cpu);
 	}
-
-	pda->irqstackptr += IRQSTACKSIZE-64;
 }
 
 char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
-- 
GitLab


From 23952a96ae738277f3139b63d622e22984589031 Mon Sep 17 00:00:00 2001
From: Andreas Herrmann <andreas.herrmann3@amd.com>
Date: Wed, 6 Aug 2008 10:29:37 +0200
Subject: [PATCH 838/869] x86: cpu_init(): fix memory leak when using CPU
 hotplug

Exception stacks are allocated each time a CPU is set online.
But the allocated space is never freed. Thus with one CPU hotplug
offline/online cycle there is a memory leak of 24K (6 pages) for
a CPU.

Fix is to allocate exception stacks only once -- when the CPU is
set online for the first time.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: akpm@linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/cpu/common_64.c | 23 +++++++++++++----------
 1 file changed, 13 insertions(+), 10 deletions(-)

diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
index 4f2eeb5652e..a11f5d4477c 100644
--- a/arch/x86/kernel/cpu/common_64.c
+++ b/arch/x86/kernel/cpu/common_64.c
@@ -640,19 +640,22 @@ void __cpuinit cpu_init(void)
 	/*
 	 * set up and load the per-CPU TSS
 	 */
-	for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+	if (!orig_ist->ist[0]) {
 		static const unsigned int order[N_EXCEPTION_STACKS] = {
-			[0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
-			[DEBUG_STACK - 1] = DEBUG_STACK_ORDER
+		  [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
+		  [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
 		};
-		if (cpu) {
-			estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
-			if (!estacks)
-				panic("Cannot allocate exception stack %ld %d\n",
-				      v, cpu);
+		for (v = 0; v < N_EXCEPTION_STACKS; v++) {
+			if (cpu) {
+				estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
+				if (!estacks)
+					panic("Cannot allocate exception "
+					      "stack %ld %d\n", v, cpu);
+			}
+			estacks += PAGE_SIZE << order[v];
+			orig_ist->ist[v] = t->x86_tss.ist[v] =
+					(unsigned long)estacks;
 		}
-		estacks += PAGE_SIZE << order[v];
-		orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks;
 	}
 
 	t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
-- 
GitLab


From b2e601d14deb2083e2a537b47869ab3895d23a28 Mon Sep 17 00:00:00 2001
From: Andre Detsch <adetsch@br.ibm.com>
Date: Thu, 4 Sep 2008 21:16:27 +0000
Subject: [PATCH 839/869] powerpc/spufs: Fix possible scheduling of a context
 to multiple SPEs

We currently have a race when scheduling a context to a SPE -
after we have found a runnable context in spusched_tick, the same
context may have been scheduled by spu_activate().

This may result in a panic if we try to unschedule a context that has
been freed in the meantime.

This change exits spu_schedule() if the context has already been
scheduled, so we don't end up scheduling it twice.

Signed-off-by: Andre Detsch <adetsch@br.ibm.com>
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
---
 arch/powerpc/platforms/cell/spufs/sched.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 897c7406116..67595bc380d 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -728,7 +728,8 @@ static void spu_schedule(struct spu *spu, struct spu_context *ctx)
 	/* not a candidate for interruptible because it's called either
 	   from the scheduler thread or from spu_deactivate */
 	mutex_lock(&ctx->state_mutex);
-	__spu_schedule(spu, ctx);
+	if (ctx->state == SPU_STATE_SAVED)
+		__spu_schedule(spu, ctx);
 	spu_release(ctx);
 }
 
-- 
GitLab


From 66bf79182d6531c14c1f9a507b6bbf374a2ae4cd Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sun, 7 Sep 2008 18:19:25 -0700
Subject: [PATCH 840/869] netfilter: nf_conntrack_sip: de-static helper
 pointers

Helper's ->help hook can run concurrently with itself, so iterating over
SIP helpers with static pointer won't work reliably.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/nf_conntrack_sip.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c
index 2f9bbc058b4..1fa306be60f 100644
--- a/net/netfilter/nf_conntrack_sip.c
+++ b/net/netfilter/nf_conntrack_sip.c
@@ -1193,7 +1193,6 @@ static const struct sip_handler sip_handlers[] = {
 static int process_sip_response(struct sk_buff *skb,
 				const char **dptr, unsigned int *datalen)
 {
-	static const struct sip_handler *handler;
 	enum ip_conntrack_info ctinfo;
 	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
 	unsigned int matchoff, matchlen;
@@ -1214,6 +1213,8 @@ static int process_sip_response(struct sk_buff *skb,
 	dataoff = matchoff + matchlen + 1;
 
 	for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
+		const struct sip_handler *handler;
+
 		handler = &sip_handlers[i];
 		if (handler->response == NULL)
 			continue;
@@ -1228,13 +1229,14 @@ static int process_sip_response(struct sk_buff *skb,
 static int process_sip_request(struct sk_buff *skb,
 			       const char **dptr, unsigned int *datalen)
 {
-	static const struct sip_handler *handler;
 	enum ip_conntrack_info ctinfo;
 	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
 	unsigned int matchoff, matchlen;
 	unsigned int cseq, i;
 
 	for (i = 0; i < ARRAY_SIZE(sip_handlers); i++) {
+		const struct sip_handler *handler;
+
 		handler = &sip_handlers[i];
 		if (handler->request == NULL)
 			continue;
-- 
GitLab


From 887464a41fde7e9e1e11ca86748338033c502446 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sun, 7 Sep 2008 18:20:08 -0700
Subject: [PATCH 841/869] netfilter: nf_conntrack_gre: more locking around
 keymap list

gre_keymap_list should be protected in all places.
(unless I'm misreading something)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/nf_conntrack_proto_gre.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c
index 654a4f7f12c..b308bb4c12b 100644
--- a/net/netfilter/nf_conntrack_proto_gre.c
+++ b/net/netfilter/nf_conntrack_proto_gre.c
@@ -97,10 +97,14 @@ int nf_ct_gre_keymap_add(struct nf_conn *ct, enum ip_conntrack_dir dir,
 	kmp = &help->help.ct_pptp_info.keymap[dir];
 	if (*kmp) {
 		/* check whether it's a retransmission */
+		read_lock_bh(&nf_ct_gre_lock);
 		list_for_each_entry(km, &gre_keymap_list, list) {
-			if (gre_key_cmpfn(km, t) && km == *kmp)
+			if (gre_key_cmpfn(km, t) && km == *kmp) {
+				read_unlock_bh(&nf_ct_gre_lock);
 				return 0;
+			}
 		}
+		read_unlock_bh(&nf_ct_gre_lock);
 		pr_debug("trying to override keymap_%s for ct %p\n",
 			 dir == IP_CT_DIR_REPLY ? "reply" : "orig", ct);
 		return -EEXIST;
-- 
GitLab


From 51807e91a76a531d059ec7ce3395c435e4df52a8 Mon Sep 17 00:00:00 2001
From: Alexey Dobriyan <adobriyan@gmail.com>
Date: Sun, 7 Sep 2008 18:20:36 -0700
Subject: [PATCH 842/869] netfilter: nf_conntrack_gre: nf_ct_gre_keymap_flush()
 fixlet

It does "kfree(list_head)" which looks wrong because entity that was
allocated is definitely not list_head.

However, this all works because list_head is first item in
struct nf_ct_gre_keymap.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/nf_conntrack_proto_gre.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/nf_conntrack_proto_gre.c b/net/netfilter/nf_conntrack_proto_gre.c
index b308bb4c12b..9bd03967fea 100644
--- a/net/netfilter/nf_conntrack_proto_gre.c
+++ b/net/netfilter/nf_conntrack_proto_gre.c
@@ -45,12 +45,12 @@ static LIST_HEAD(gre_keymap_list);
 
 void nf_ct_gre_keymap_flush(void)
 {
-	struct list_head *pos, *n;
+	struct nf_ct_gre_keymap *km, *tmp;
 
 	write_lock_bh(&nf_ct_gre_lock);
-	list_for_each_safe(pos, n, &gre_keymap_list) {
-		list_del(pos);
-		kfree(pos);
+	list_for_each_entry_safe(km, tmp, &gre_keymap_list, list) {
+		list_del(&km->list);
+		kfree(km);
 	}
 	write_unlock_bh(&nf_ct_gre_lock);
 }
-- 
GitLab


From e3b802ba885b54f4050164c3cfd9e0ba9c73173a Mon Sep 17 00:00:00 2001
From: Patrick McHardy <kaber@trash.net>
Date: Sun, 7 Sep 2008 18:21:24 -0700
Subject: [PATCH 843/869] netfilter: nf_conntrack_irc: make sure string is
 terminated before calling simple_strtoul

Alexey Dobriyan points out:

1. simple_strtoul() silently accepts all characters for given base even
   if result won't fit into unsigned long. This is amazing stupidity in
   itself, but

2. nf_conntrack_irc helper use simple_strtoul() for DCC request parsing.
   Data first copied into 64KB buffer, so theoretically nothing prevents
   reading past the end of it, since data comes from network given 1).

This is not actually a problem currently since we're guaranteed to have
a 0 byte in skb_shared_info or in the buffer the data is copied to, but
to make this more robust, make sure the string is actually terminated.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/netfilter/nf_conntrack_irc.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/net/netfilter/nf_conntrack_irc.c b/net/netfilter/nf_conntrack_irc.c
index 1b1226d6653..20633fdf7e6 100644
--- a/net/netfilter/nf_conntrack_irc.c
+++ b/net/netfilter/nf_conntrack_irc.c
@@ -68,11 +68,21 @@ static const char *const dccprotos[] = {
 static int parse_dcc(char *data, const char *data_end, u_int32_t *ip,
 		     u_int16_t *port, char **ad_beg_p, char **ad_end_p)
 {
+	char *tmp;
+
 	/* at least 12: "AAAAAAAA P\1\n" */
 	while (*data++ != ' ')
 		if (data > data_end - 12)
 			return -1;
 
+	/* Make sure we have a newline character within the packet boundaries
+	 * because simple_strtoul parses until the first invalid character. */
+	for (tmp = data; tmp <= data_end; tmp++)
+		if (*tmp == '\n')
+			break;
+	if (tmp > data_end || *tmp != '\n')
+		return -1;
+
 	*ad_beg_p = data;
 	*ip = simple_strtoul(data, &data, 10);
 
-- 
GitLab


From e8a83e10d7dfe5d0841062780769b30f65417e15 Mon Sep 17 00:00:00 2001
From: Jarek Poplawski <jarkao2@gmail.com>
Date: Sun, 7 Sep 2008 18:41:21 -0700
Subject: [PATCH 844/869] pkt_sched: Fix qdisc state in net_tx_action()

net_tx_action() can skip __QDISC_STATE_SCHED bit clearing while qdisc
is neither ran nor rescheduled, which may cause endless loop in
dev_deactivate().

Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Tested-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/core/dev.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/core/dev.c b/net/core/dev.c
index 60c51f76588..e719ed29310 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1991,8 +1991,13 @@ static void net_tx_action(struct softirq_action *h)
 				spin_unlock(root_lock);
 			} else {
 				if (!test_bit(__QDISC_STATE_DEACTIVATED,
-					      &q->state))
+					      &q->state)) {
 					__netif_reschedule(q);
+				} else {
+					smp_mb__before_clear_bit();
+					clear_bit(__QDISC_STATE_SCHED,
+						  &q->state);
+				}
 			}
 		}
 	}
-- 
GitLab


From f4c4cd6d14e3a3f638475f2f83e26765a7d3327b Mon Sep 17 00:00:00 2001
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Mon, 8 Sep 2008 14:29:54 +1000
Subject: [PATCH 845/869] Revert "crypto: camellia - Use kernel-provided
 bitops, unaligned access helpers"

This reverts commit bd699f2df6dbc2f4cba528fe598bd63a4d3702c5,
which causes camellia to fail the included self-test vectors.
It has also been confirmed that it breaks existing encrypted
disks using camellia.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
---
 crypto/camellia.c | 84 +++++++++++++++++++++++++++--------------------
 1 file changed, 48 insertions(+), 36 deletions(-)

diff --git a/crypto/camellia.c b/crypto/camellia.c
index b1cc4de6493..493fee7e0a8 100644
--- a/crypto/camellia.c
+++ b/crypto/camellia.c
@@ -35,8 +35,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/bitops.h>
-#include <asm/unaligned.h>
 
 static const u32 camellia_sp1110[256] = {
 	0x70707000,0x82828200,0x2c2c2c00,0xececec00,
@@ -337,6 +335,20 @@ static const u32 camellia_sp4404[256] = {
 /*
  *  macros
  */
+#define GETU32(v, pt) \
+    do { \
+	/* latest breed of gcc is clever enough to use move */ \
+	memcpy(&(v), (pt), 4); \
+	(v) = be32_to_cpu(v); \
+    } while(0)
+
+/* rotation right shift 1byte */
+#define ROR8(x) (((x) >> 8) + ((x) << 24))
+/* rotation left shift 1bit */
+#define ROL1(x) (((x) << 1) + ((x) >> 31))
+/* rotation left shift 1byte */
+#define ROL8(x) (((x) << 8) + ((x) >> 24))
+
 #define ROLDQ(ll, lr, rl, rr, w0, w1, bits)		\
     do {						\
 	w0 = ll;					\
@@ -371,7 +383,7 @@ static const u32 camellia_sp4404[256] = {
 	   ^ camellia_sp3033[(u8)(il >> 8)]			\
 	   ^ camellia_sp4404[(u8)(il     )];			\
 	yl ^= yr;						\
-	yr = ror32(yr, 8);					\
+	yr = ROR8(yr);						\
 	yr ^= yl;						\
     } while(0)
 
@@ -393,7 +405,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[7] ^= subL[1]; subR[7] ^= subR[1];
 	subL[1] ^= subR[1] & ~subR[9];
 	dw = subL[1] & subL[9],
-		subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl2) */
+		subR[1] ^= ROL1(dw); /* modified for FLinv(kl2) */
 	/* round 8 */
 	subL[11] ^= subL[1]; subR[11] ^= subR[1];
 	/* round 10 */
@@ -402,7 +414,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[15] ^= subL[1]; subR[15] ^= subR[1];
 	subL[1] ^= subR[1] & ~subR[17];
 	dw = subL[1] & subL[17],
-		subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl4) */
+		subR[1] ^= ROL1(dw); /* modified for FLinv(kl4) */
 	/* round 14 */
 	subL[19] ^= subL[1]; subR[19] ^= subR[1];
 	/* round 16 */
@@ -418,7 +430,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	} else {
 		subL[1] ^= subR[1] & ~subR[25];
 		dw = subL[1] & subL[25],
-			subR[1] ^= rol32(dw, 1); /* modified for FLinv(kl6) */
+			subR[1] ^= ROL1(dw); /* modified for FLinv(kl6) */
 		/* round 20 */
 		subL[27] ^= subL[1]; subR[27] ^= subR[1];
 		/* round 22 */
@@ -438,7 +450,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 		subL[26] ^= kw4l; subR[26] ^= kw4r;
 		kw4l ^= kw4r & ~subR[24];
 		dw = kw4l & subL[24],
-			kw4r ^= rol32(dw, 1); /* modified for FL(kl5) */
+			kw4r ^= ROL1(dw); /* modified for FL(kl5) */
 	}
 	/* round 17 */
 	subL[22] ^= kw4l; subR[22] ^= kw4r;
@@ -448,7 +460,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[18] ^= kw4l; subR[18] ^= kw4r;
 	kw4l ^= kw4r & ~subR[16];
 	dw = kw4l & subL[16],
-		kw4r ^= rol32(dw, 1); /* modified for FL(kl3) */
+		kw4r ^= ROL1(dw); /* modified for FL(kl3) */
 	/* round 11 */
 	subL[14] ^= kw4l; subR[14] ^= kw4r;
 	/* round 9 */
@@ -457,7 +469,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	subL[10] ^= kw4l; subR[10] ^= kw4r;
 	kw4l ^= kw4r & ~subR[8];
 	dw = kw4l & subL[8],
-		kw4r ^= rol32(dw, 1); /* modified for FL(kl1) */
+		kw4r ^= ROL1(dw); /* modified for FL(kl1) */
 	/* round 5 */
 	subL[6] ^= kw4l; subR[6] ^= kw4r;
 	/* round 3 */
@@ -482,7 +494,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(6) = subR[5] ^ subR[7];
 	tl = subL[10] ^ (subR[10] & ~subR[8]);
 	dw = tl & subL[8],  /* FL(kl1) */
-		tr = subR[10] ^ rol32(dw, 1);
+		tr = subR[10] ^ ROL1(dw);
 	SUBKEY_L(7) = subL[6] ^ tl; /* round 6 */
 	SUBKEY_R(7) = subR[6] ^ tr;
 	SUBKEY_L(8) = subL[8];       /* FL(kl1) */
@@ -491,7 +503,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(9) = subR[9];
 	tl = subL[7] ^ (subR[7] & ~subR[9]);
 	dw = tl & subL[9],  /* FLinv(kl2) */
-		tr = subR[7] ^ rol32(dw, 1);
+		tr = subR[7] ^ ROL1(dw);
 	SUBKEY_L(10) = tl ^ subL[11]; /* round 7 */
 	SUBKEY_R(10) = tr ^ subR[11];
 	SUBKEY_L(11) = subL[10] ^ subL[12]; /* round 8 */
@@ -504,7 +516,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(14) = subR[13] ^ subR[15];
 	tl = subL[18] ^ (subR[18] & ~subR[16]);
 	dw = tl & subL[16], /* FL(kl3) */
-		tr = subR[18] ^ rol32(dw, 1);
+		tr = subR[18] ^ ROL1(dw);
 	SUBKEY_L(15) = subL[14] ^ tl; /* round 12 */
 	SUBKEY_R(15) = subR[14] ^ tr;
 	SUBKEY_L(16) = subL[16];     /* FL(kl3) */
@@ -513,7 +525,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	SUBKEY_R(17) = subR[17];
 	tl = subL[15] ^ (subR[15] & ~subR[17]);
 	dw = tl & subL[17], /* FLinv(kl4) */
-		tr = subR[15] ^ rol32(dw, 1);
+		tr = subR[15] ^ ROL1(dw);
 	SUBKEY_L(18) = tl ^ subL[19]; /* round 13 */
 	SUBKEY_R(18) = tr ^ subR[19];
 	SUBKEY_L(19) = subL[18] ^ subL[20]; /* round 14 */
@@ -532,7 +544,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	} else {
 		tl = subL[26] ^ (subR[26] & ~subR[24]);
 		dw = tl & subL[24], /* FL(kl5) */
-			tr = subR[26] ^ rol32(dw, 1);
+			tr = subR[26] ^ ROL1(dw);
 		SUBKEY_L(23) = subL[22] ^ tl; /* round 18 */
 		SUBKEY_R(23) = subR[22] ^ tr;
 		SUBKEY_L(24) = subL[24];     /* FL(kl5) */
@@ -541,7 +553,7 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 		SUBKEY_R(25) = subR[25];
 		tl = subL[23] ^ (subR[23] & ~subR[25]);
 		dw = tl & subL[25], /* FLinv(kl6) */
-			tr = subR[23] ^ rol32(dw, 1);
+			tr = subR[23] ^ ROL1(dw);
 		SUBKEY_L(26) = tl ^ subL[27]; /* round 19 */
 		SUBKEY_R(26) = tr ^ subR[27];
 		SUBKEY_L(27) = subL[26] ^ subL[28]; /* round 20 */
@@ -561,17 +573,17 @@ static void camellia_setup_tail(u32 *subkey, u32 *subL, u32 *subR, int max)
 	/* apply the inverse of the last half of P-function */
 	i = 2;
 	do {
-		dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = rol32(dw, 8);/* round 1 */
+		dw = SUBKEY_L(i + 0) ^ SUBKEY_R(i + 0); dw = ROL8(dw);/* round 1 */
 		SUBKEY_R(i + 0) = SUBKEY_L(i + 0) ^ dw; SUBKEY_L(i + 0) = dw;
-		dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = rol32(dw, 8);/* round 2 */
+		dw = SUBKEY_L(i + 1) ^ SUBKEY_R(i + 1); dw = ROL8(dw);/* round 2 */
 		SUBKEY_R(i + 1) = SUBKEY_L(i + 1) ^ dw; SUBKEY_L(i + 1) = dw;
-		dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = rol32(dw, 8);/* round 3 */
+		dw = SUBKEY_L(i + 2) ^ SUBKEY_R(i + 2); dw = ROL8(dw);/* round 3 */
 		SUBKEY_R(i + 2) = SUBKEY_L(i + 2) ^ dw; SUBKEY_L(i + 2) = dw;
-		dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = rol32(dw, 8);/* round 4 */
+		dw = SUBKEY_L(i + 3) ^ SUBKEY_R(i + 3); dw = ROL8(dw);/* round 4 */
 		SUBKEY_R(i + 3) = SUBKEY_L(i + 3) ^ dw; SUBKEY_L(i + 3) = dw;
-		dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = rol32(dw, 9);/* round 5 */
+		dw = SUBKEY_L(i + 4) ^ SUBKEY_R(i + 4); dw = ROL8(dw);/* round 5 */
 		SUBKEY_R(i + 4) = SUBKEY_L(i + 4) ^ dw; SUBKEY_L(i + 4) = dw;
-		dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = rol32(dw, 8);/* round 6 */
+		dw = SUBKEY_L(i + 5) ^ SUBKEY_R(i + 5); dw = ROL8(dw);/* round 6 */
 		SUBKEY_R(i + 5) = SUBKEY_L(i + 5) ^ dw; SUBKEY_L(i + 5) = dw;
 		i += 8;
 	} while (i < max);
@@ -587,10 +599,10 @@ static void camellia_setup128(const unsigned char *key, u32 *subkey)
 	/**
 	 *  k == kll || klr || krl || krr (|| is concatenation)
 	 */
-	kll = get_unaligned_be32(key);
-	klr = get_unaligned_be32(key + 4);
-	krl = get_unaligned_be32(key + 8);
-	krr = get_unaligned_be32(key + 12);
+	GETU32(kll, key     );
+	GETU32(klr, key +  4);
+	GETU32(krl, key +  8);
+	GETU32(krr, key + 12);
 
 	/* generate KL dependent subkeys */
 	/* kw1 */
@@ -695,14 +707,14 @@ static void camellia_setup256(const unsigned char *key, u32 *subkey)
 	 *  key = (kll || klr || krl || krr || krll || krlr || krrl || krrr)
 	 *  (|| is concatenation)
 	 */
-	kll = get_unaligned_be32(key);
-	klr = get_unaligned_be32(key + 4);
-	krl = get_unaligned_be32(key + 8);
-	krr = get_unaligned_be32(key + 12);
-	krll = get_unaligned_be32(key + 16);
-	krlr = get_unaligned_be32(key + 20);
-	krrl = get_unaligned_be32(key + 24);
-	krrr = get_unaligned_be32(key + 28);
+	GETU32(kll,  key     );
+	GETU32(klr,  key +  4);
+	GETU32(krl,  key +  8);
+	GETU32(krr,  key + 12);
+	GETU32(krll, key + 16);
+	GETU32(krlr, key + 20);
+	GETU32(krrl, key + 24);
+	GETU32(krrr, key + 28);
 
 	/* generate KL dependent subkeys */
 	/* kw1 */
@@ -858,13 +870,13 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey)
 	t0 &= ll;							\
 	t2 |= rr;							\
 	rl ^= t2;							\
-	lr ^= rol32(t0, 1);						\
+	lr ^= ROL1(t0);							\
 	t3 = krl;							\
 	t1 = klr;							\
 	t3 &= rl;							\
 	t1 |= lr;							\
 	ll ^= t1;							\
-	rr ^= rol32(t3, 1);						\
+	rr ^= ROL1(t3);							\
     } while(0)
 
 #define CAMELLIA_ROUNDSM(xl, xr, kl, kr, yl, yr, il, ir)		\
@@ -880,7 +892,7 @@ static void camellia_setup192(const unsigned char *key, u32 *subkey)
 	il ^= kl;							\
 	ir ^= il ^ kr;							\
 	yl ^= ir;							\
-	yr ^= ror32(il, 8) ^ ir;						\
+	yr ^= ROR8(il) ^ ir;						\
     } while(0)
 
 /* max = 24: 128bit encrypt, max = 32: 256bit encrypt */
-- 
GitLab


From 4ff23fa93011e2367fea056e72c92709178972d9 Mon Sep 17 00:00:00 2001
From: Hugh Dickins <hugh@veritas.com>
Date: Sun, 7 Sep 2008 00:35:48 +0100
Subject: [PATCH 846/869] powerpc: Fix rare boot build breakage
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

A make -j20 powerpc kernel build broke a couple of months ago saying:
In file included from arch/powerpc/boot/gunzip_util.h:13,
                 from arch/powerpc/boot/prpmc2800.c:21:
arch/powerpc/boot/zlib.h:85: error: expected ‘:’, ‘,’, ‘;’, ‘}’ or ‘__attribute__’ before ‘*’ token
arch/powerpc/boot/zlib.h:630: warning: type defaults to ‘int’ in declaration of ‘Byte’
arch/powerpc/boot/zlib.h:630: error: expected ‘;’, ‘,’ or ‘)’ before ‘*’ token

It happened again yesterday: too rare for me to confirm the fix, but
it looks like the list of dependants on gunzip_util.h was incomplete.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
 arch/powerpc/boot/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 14174aa2407..717a3bc1352 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -49,7 +49,7 @@ zlib       := inffast.c inflate.c inftrees.c
 zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h
 zliblinuxheader := zlib.h zconf.h zutil.h
 
-$(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \
+$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
 	$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
 
 src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
-- 
GitLab


From 5b66c829bf5c65663b2f68ee6b42f6e834cd39cd Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 3 Sep 2008 14:48:34 +0100
Subject: [PATCH 847/869] ahci, pata_marvell: play nicely together

I've been chasing Jeff about this for months.  Jeff added the Marvell
device identifiers to the ahci driver without making the AHCI driver
handle the PATA port. This means a lot of users can't use current
kernels and in most distro cases can't even install.

This has been going on since March 2008 for the 6121 Marvell, and late 2007
for the 6145!!!

This was all pointed out at the time and repeatedly ignored. Bugs assigned
to Jeff about this are ignored also.

To quote Jeff in email

> "Just switch the order of 'ahci' and 'pata_marvell' in
> /etc/modprobe.conf, then use Fedora's tools regenerate the initrd.

> See?  It's not rocket science, and the current configuration can be
> easily made to work for Fedora users."

(Which isn't trivial, isn't end user, shouldn't be needed, and as it usually
breaks at install time is in fact impossible)

To quote Jeff in August 2007

> "   mv-ahci-pata
> Marvell 6121/6141 PATA support.  Needs fixing in the 'PATA controller
> command' area before it is usable, and can go upstream."

Only he add the ids anyway later and caused regressions, adding a further
id in March causing more regresions.

The actual fix for the moment is very simple. If the user has included
the pata_marvell driver let it drive the ports. If they've only selected
for SATA support give them the AHCI driver which will run the port a fraction
faster. Allow the user to control this decision via ahci.marvell_enable as
a module parameter so that distributions can ship 'it works' defaults and
smarter users (or config tools) can then flip it over it desired.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/Kconfig        |  6 +++--
 drivers/ata/ahci.c         | 17 +++++++++++++
 drivers/ata/pata_marvell.c | 51 ++++++++++++++++++++++++++++----------
 3 files changed, 59 insertions(+), 15 deletions(-)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ae8494944c4..11c8c19f0fb 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -448,8 +448,10 @@ config PATA_MARVELL
 	tristate "Marvell PATA support via legacy mode"
 	depends on PCI
 	help
-	  This option enables limited support for the Marvell 88SE6145 ATA
-	  controller.
+	  This option enables limited support for the Marvell 88SE61xx ATA
+	  controllers. If you wish to use only the SATA ports then select
+	  the AHCI driver alone. If you wish to the use the PATA port or
+	  both SATA and PATA include this driver.
 
 	  If unsure, say N.
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index c729e6988bb..bce26ee3806 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -610,6 +610,15 @@ module_param(ahci_em_messages, int, 0444);
 MODULE_PARM_DESC(ahci_em_messages,
 	"Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
 
+#if defined(CONFIG_PATA_MARVELL) || defined(CONFIG_PATA_MARVELL_MODULE)
+static int marvell_enable;
+#else
+static int marvell_enable = 1;
+#endif
+module_param(marvell_enable, int, 0644);
+MODULE_PARM_DESC(marvell_enable, "Marvell SATA via AHCI (1 = enabled)");
+
+
 static inline int ahci_nr_ports(u32 cap)
 {
 	return (cap & 0x1f) + 1;
@@ -732,6 +741,8 @@ static void ahci_save_initial_config(struct pci_dev *pdev,
 			   "MV_AHCI HACK: port_map %x -> %x\n",
 			   port_map,
 			   port_map & mv);
+		dev_printk(KERN_ERR, &pdev->dev,
+			  "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
 
 		port_map &= mv;
 	}
@@ -2533,6 +2544,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	/* The AHCI driver can only drive the SATA ports, the PATA driver
+	   can drive them all so if both drivers are selected make sure
+	   AHCI stays out of the way */
+	if (pdev->vendor == PCI_VENDOR_ID_MARVELL && !marvell_enable)
+		return -ENODEV;
+
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
 	if (rc)
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 24a011b2502..0d87eec8496 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -20,29 +20,30 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_marvell"
-#define DRV_VERSION	"0.1.4"
+#define DRV_VERSION	"0.1.6"
 
 /**
- *	marvell_pre_reset	-	check for 40/80 pin
- *	@link: link
- *	@deadline: deadline jiffies for the operation
+ *	marvell_pata_active	-	check if PATA is active
+ *	@pdev: PCI device
  *
- *	Perform the PATA port setup we need.
+ *	Returns 1 if the PATA port may be active. We know how to check this
+ *	for the 6145 but not the other devices
  */
 
-static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+static int marvell_pata_active(struct pci_dev *pdev)
 {
-	struct ata_port *ap = link->ap;
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	int i;
 	u32 devices;
 	void __iomem *barp;
-	int i;
 
-	/* Check if our port is enabled */
+	/* We don't yet know how to do this for other devices */
+	if (pdev->device != 0x6145)
+		return 1;	
 
 	barp = pci_iomap(pdev, 5, 0x10);
 	if (barp == NULL)
 		return -ENOMEM;
+
 	printk("BAR5:");
 	for(i = 0; i <= 0x0F; i++)
 		printk("%02X:%02X ", i, ioread8(barp + i));
@@ -51,9 +52,27 @@ static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
 	devices = ioread32(barp + 0x0C);
 	pci_iounmap(pdev, barp);
 
-	if ((pdev->device == 0x6145) && (ap->port_no == 0) &&
-	    (!(devices & 0x10)))	/* PATA enable ? */
-		return -ENOENT;
+	if (devices & 0x10)
+		return 1;
+	return 0;
+}
+
+/**
+ *	marvell_pre_reset	-	check for 40/80 pin
+ *	@link: link
+ *	@deadline: deadline jiffies for the operation
+ *
+ *	Perform the PATA port setup we need.
+ */
+
+static int marvell_pre_reset(struct ata_link *link, unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (pdev->device == 0x6145 && ap->port_no == 0 &&
+		!marvell_pata_active(pdev))	/* PATA enable ? */
+			return -ENOENT;
 
 	return ata_sff_prereset(link, deadline);
 }
@@ -128,6 +147,12 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	if (pdev->device == 0x6101)
 		ppi[1] = &ata_dummy_port_info;
 
+#if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE)
+	if (!marvell_pata_active(pdev)) {
+		printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n");
+		return -ENODEV;
+	}
+#endif
 	return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL);
 }
 
-- 
GitLab


From 46c5784c8fa736c2bb42fe681189b86e99abdc2e Mon Sep 17 00:00:00 2001
From: Mark Lord <liml@rtr.ca>
Date: Thu, 4 Sep 2008 18:21:07 -0400
Subject: [PATCH 848/869] sata_mv: add RocketRaid 1720 PCI ID to driver

Signed-off-by: Petr Jelen <petr.jelen@gmail.com>
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_mv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 13c1d2af18a..c815f8ecf6e 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -667,7 +667,8 @@ static const struct pci_device_id mv_pci_tbl[] = {
 	{ PCI_VDEVICE(MARVELL, 0x5041), chip_504x },
 	{ PCI_VDEVICE(MARVELL, 0x5080), chip_5080 },
 	{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
-	/* RocketRAID 1740/174x have different identifiers */
+	/* RocketRAID 1720/174x have different identifiers */
+	{ PCI_VDEVICE(TTI, 0x1720), chip_6042 },
 	{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
 	{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
 
-- 
GitLab


From 17248461cb66103b87ff03bdee34aa61035cc93e Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 29 Aug 2008 16:03:59 +0200
Subject: [PATCH 849/869] ahci: disable PMP for marvell ahcis

Marvell ahcis don't play nicely with PMPs.  Disable it.

Reported by KueiHuan Chen in the following thread.

  http://thread.gmane.org/gmane.linux.ide/33296

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: KueiHuan Chen <kueihuan.chen@gmail.com>
Cc: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ahci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index bce26ee3806..66aa146bf4d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci_mv */
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
-				 AHCI_HFLAG_MV_PATA),
+				 AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
 		.pio_mask	= 0x1f, /* pio0-4 */
-- 
GitLab


From 2fd673ecf0378ddeeeb87b3605e50212e0c0ddc6 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 29 Aug 2008 16:13:12 +0200
Subject: [PATCH 850/869] sata_nv: disable hardreset for generic

of them being unifying probing, hotplug and EH reset paths uniform.
Previously, broken hardreset could go unnoticed as it wasn't used
during probing but when something goes wrong or after hotplug the
problem will surface and bite hard.

OSDL bug 11195 reports that sata_nv generic flavor falls into this
category.  Hardreset itself succeeds but PHY stays offline after
hardreset.  I tried longer debounce timing but the result was the
same.

  http://bugzilla.kernel.org/show_bug.cgi?id=11195

So, it seems we'll have to drop hardreset from the generic flavor.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peer Chen <pchen@nvidia.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/sata_nv.c | 19 +------------------
 1 file changed, 1 insertion(+), 18 deletions(-)

diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 858f70610ed..1e1f3f3757a 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -309,8 +309,6 @@ static void nv_nf2_freeze(struct ata_port *ap);
 static void nv_nf2_thaw(struct ata_port *ap);
 static void nv_ck804_freeze(struct ata_port *ap);
 static void nv_ck804_thaw(struct ata_port *ap);
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-			unsigned long deadline);
 static int nv_adma_slave_config(struct scsi_device *sdev);
 static int nv_adma_check_atapi_dma(struct ata_queued_cmd *qc);
 static void nv_adma_qc_prep(struct ata_queued_cmd *qc);
@@ -407,7 +405,7 @@ static struct scsi_host_template nv_swncq_sht = {
 
 static struct ata_port_operations nv_generic_ops = {
 	.inherits		= &ata_bmdma_port_ops,
-	.hardreset		= nv_hardreset,
+	.hardreset		= ATA_OP_NULL,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
 };
@@ -1588,21 +1586,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
 	ata_sff_thaw(ap);
 }
 
-static int nv_hardreset(struct ata_link *link, unsigned int *class,
-			unsigned long deadline)
-{
-	int rc;
-
-	/* SATA hardreset fails to retrieve proper device signature on
-	 * some controllers.  Request follow up SRST.  For more info,
-	 * see http://bugzilla.kernel.org/show_bug.cgi?id=3352
-	 */
-	rc = sata_sff_hardreset(link, class, deadline);
-	if (rc)
-		return rc;
-	return -EAGAIN;
-}
-
 static void nv_adma_error_handler(struct ata_port *ap)
 {
 	struct nv_adma_port_priv *pp = ap->private_data;
-- 
GitLab


From 9c2676b61a5a4b6d99e65fb2f438fb3914302eda Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 29 Aug 2008 16:27:43 +0200
Subject: [PATCH 851/869] libata-sff: kill spurious WARN_ON() in ata_hsm_move()

On HSM_ST_ERR, ata_hsm_move() triggers WARN_ON() if AC_ERR_DEV or
AC_ERR_HSM is not set.  PHY events may trigger HSM_ST_ERR with other
error codes and, with or without it, there just isn't much reason to
do WARN_ON() on it.  Even if error code is not set there, core EH
logic won't have any problem dealing with the error condition.

OSDL bz#11065 reports this problem.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/libata-sff.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 304fdc6f1dc..2a4c516894f 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1315,11 +1315,6 @@ fsm_start:
 		break;
 
 	case HSM_ST_ERR:
-		/* make sure qc->err_mask is available to
-		 * know what's wrong and recover
-		 */
-		WARN_ON(!(qc->err_mask & (AC_ERR_DEV | AC_ERR_HSM)));
-
 		ap->hsm_task_state = HSM_ST_IDLE;
 
 		/* complete taskfile transaction */
-- 
GitLab


From de058cdea65842ed4bf17da6b50d6fe6b120a6ef Mon Sep 17 00:00:00 2001
From: David Milburn <dmilburn@redhat.com>
Date: Fri, 29 Aug 2008 10:36:28 -0500
Subject: [PATCH 852/869] pata_sil680: remove duplicate pcim_enable_device

Remove duplicate call to pcim_enable_device in sil680_init_one.

Signed-off-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/pata_sil680.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 720b8645f58..e970b227fbc 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -322,9 +322,6 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 	/* Try to acquire MMIO resources and fallback to PIO if
 	 * that fails
 	 */
-	rc = pcim_enable_device(pdev);
-	if (rc)
-		return rc;
 	rc = pcim_iomap_regions(pdev, 1 << SIL680_MMIO_BAR, DRV_NAME);
 	if (rc)
 		goto use_ioports;
-- 
GitLab


From 8e48b6b307085ce8a747cf94294742f7b7a11b18 Mon Sep 17 00:00:00 2001
From: Seth Heasley <seth.heasley@intel.com>
Date: Wed, 27 Aug 2008 16:47:22 -0700
Subject: [PATCH 853/869] ahci: RAID mode SATA patch for Intel Ibex Peak
 DeviceIDs

Add the Intel Ibex Peak (PCH) SATA RAID Controller DeviceIDs.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
---
 drivers/ata/ahci.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 66aa146bf4d..2e1a7cb2ed5 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -487,7 +487,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-- 
GitLab


From 4a911b1efe219fa3c8af697be0054c72e13bdae4 Mon Sep 17 00:00:00 2001
From: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Date: Thu, 4 Sep 2008 23:05:45 +0200
Subject: [PATCH 854/869] [MIPS] IP22: Fix detection of second HPC3 on
 Challenge S

The second HPC3 could be found only on Guiness systems (Challenge-S),
but not on fullhouse (Indigo2) systems.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/sgi-ip22/ip22-platform.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 60141235ec4..52486c4d2b0 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -150,7 +150,7 @@ static int __init sgiseeq_devinit(void)
 		return res;
 
 	/* Second HPC is missing? */
-	if (!ip22_is_fullhouse() ||
+	if (ip22_is_fullhouse() ||
 	    get_dbe(tmp, (unsigned int *)&hpc3c1->pbdma[1]))
 		return 0;
 
-- 
GitLab


From 0253398ca1df7e1d2bfbb452175c964a0862482c Mon Sep 17 00:00:00 2001
From: Jeremy Fitzhardinge <jeremy@goop.org>
Date: Mon, 8 Sep 2008 09:54:49 -0700
Subject: [PATCH 855/869] xen: fix 2.6.27-rc5 xen balloon driver warnings

Set the class so it doesn't clash with the normal memory class.

Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
===================================================================
---
 drivers/xen/balloon.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index d4427cb8697..2e15da5459c 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -60,7 +60,7 @@
 
 #define PAGES2KB(_p) ((_p)<<(PAGE_SHIFT-10))
 
-#define BALLOON_CLASS_NAME "memory"
+#define BALLOON_CLASS_NAME "xen_memory"
 
 struct balloon_stats {
 	/* We aim for 'current allocation' == 'target allocation'. */
-- 
GitLab


From 14469a8dd23677921db5e7354a602c98d9c6300f Mon Sep 17 00:00:00 2001
From: Linus Torvalds <torvalds@linux-foundation.org>
Date: Fri, 5 Sep 2008 09:30:14 -0700
Subject: [PATCH 856/869] x86: disable static NOPLs on 32 bits

On 32-bit, at least the generic nops are fairly reasonable, but the
default nops for 64-bit really look pretty sad, and the P6 nops really do
look better.

So I would suggest perhaps moving the static P6 nop selection into the
CONFIG_X86_64 thing.

The alternative is to just get rid of that static nop selection, and just
have two cases: 32-bit and 64-bit, and just pick obviously safe cases for
them.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
 arch/x86/Kconfig.cpu | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 2c518fbc52e..b225219c448 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -382,14 +382,17 @@ config X86_OOSTORE
 # P6_NOPs are a relatively minor optimization that require a family >=
 # 6 processor, except that it is broken on certain VIA chips.
 # Furthermore, AMD chips prefer a totally different sequence of NOPs
-# (which work on all CPUs).  As a result, disallow these if we're
-# compiling X86_GENERIC but not X86_64 (these NOPs do work on all
-# x86-64 capable chips); the list of processors in the right-hand clause
-# are the cores that benefit from this optimization.
+# (which work on all CPUs).  In addition, it looks like Virtual PC
+# does not understand them.
+#
+# As a result, disallow these if we're not compiling for X86_64 (these
+# NOPs do work on all x86-64 capable chips); the list of processors in
+# the right-hand clause are the cores that benefit from this optimization.
 #
 config X86_P6_NOP
 	def_bool y
-	depends on (X86_64 || !X86_GENERIC) && (M686 || MPENTIUMII || MPENTIUMIII || MPENTIUMM || MCORE2 || MPENTIUM4 || MPSC)
+	depends on X86_64
+	depends on (MCORE2 || MPENTIUM4 || MPSC)
 
 config X86_TSC
 	def_bool y
-- 
GitLab


From d315492b1a6ba29da0fa2860759505ae1b2db857 Mon Sep 17 00:00:00 2001
From: Daniel Lezcano <dlezcano@fr.ibm.com>
Date: Mon, 8 Sep 2008 13:17:27 -0700
Subject: [PATCH 857/869] netns : fix kernel panic in timewait socket
 destruction

How to reproduce ?
 - create a network namespace
 - use tcp protocol and get timewait socket
 - exit the network namespace
 - after a moment (when the timewait socket is destroyed), the kernel
   panics.

# BUG: unable to handle kernel NULL pointer dereference at
0000000000000007
IP: [<ffffffff821e394d>] inet_twdr_do_twkill_work+0x6e/0xb8
PGD 119985067 PUD 11c5c0067 PMD 0
Oops: 0000 [1] SMP
CPU 1
Modules linked in: ipv6 button battery ac loop dm_mod tg3 libphy ext3 jbd
edd fan thermal processor thermal_sys sg sata_svw libata dock serverworks
sd_mod scsi_mod ide_disk ide_core [last unloaded: freq_table]
Pid: 0, comm: swapper Not tainted 2.6.27-rc2 #3
RIP: 0010:[<ffffffff821e394d>] [<ffffffff821e394d>]
inet_twdr_do_twkill_work+0x6e/0xb8
RSP: 0018:ffff88011ff7fed0 EFLAGS: 00010246
RAX: ffffffffffffffff RBX: ffffffff82339420 RCX: ffff88011ff7ff30
RDX: 0000000000000001 RSI: ffff88011a4d03c0 RDI: ffff88011ac2fc00
RBP: ffffffff823392e0 R08: 0000000000000000 R09: ffff88002802a200
R10: ffff8800a5c4b000 R11: ffffffff823e4080 R12: ffff88011ac2fc00
R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000000
FS: 0000000041cbd940(0000) GS:ffff8800bff839c0(0000)
knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000007 CR3: 00000000bd87c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffff8800bff9e000, task
ffff88011ff76690)
Stack: ffffffff823392e0 0000000000000100 ffffffff821e3a3a
0000000000000008
0000000000000000 ffffffff821e3a61 ffff8800bff7c000 ffffffff8203c7e7
ffff88011ff7ff10 ffff88011ff7ff10 0000000000000021 ffffffff82351108
Call Trace:
<IRQ> [<ffffffff821e3a3a>] ? inet_twdr_hangman+0x0/0x9e
[<ffffffff821e3a61>] ? inet_twdr_hangman+0x27/0x9e
[<ffffffff8203c7e7>] ? run_timer_softirq+0x12c/0x193
[<ffffffff820390d1>] ? __do_softirq+0x5e/0xcd
[<ffffffff8200d08c>] ? call_softirq+0x1c/0x28
[<ffffffff8200e611>] ? do_softirq+0x2c/0x68
[<ffffffff8201a055>] ? smp_apic_timer_interrupt+0x8e/0xa9
[<ffffffff8200cad6>] ? apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff82011f4c>] ? default_idle+0x27/0x3b
[<ffffffff8200abbd>] ? cpu_idle+0x5f/0x7d


Code: e8 01 00 00 4c 89 e7 41 ff c5 e8 8d fd ff ff 49 8b 44 24 38 4c 89 e7
65 8b 14 25 24 00 00 00 89 d2 48 8b 80 e8 00 00 00 48 f7 d0 <48> 8b 04 d0
48 ff 40 58 e8 fc fc ff ff 48 89 df e8 c0 5f 04 00
RIP [<ffffffff821e394d>] inet_twdr_do_twkill_work+0x6e/0xb8
RSP <ffff88011ff7fed0>
CR2: 0000000000000007

This patch provides a function to purge all timewait sockets related
to a network namespace. The timewait sockets life cycle is not tied with
the network namespace, that means the timewait sockets stay alive while
the network namespace dies. The timewait sockets are for avoiding to
receive a duplicate packet from the network, if the network namespace is
freed, the network stack is removed, so no chance to receive any packets
from the outside world. Furthermore, having a pending destruction timer
on these sockets with a network namespace freed is not safe and will lead
to an oops if the timer callback which try to access data belonging to
the namespace like for example in:
	inet_twdr_do_twkill_work
		-> NET_INC_STATS_BH(twsk_net(tw), LINUX_MIB_TIMEWAITED);

Purging the timewait sockets at the network namespace destruction will:
 1) speed up memory freeing for the namespace
 2) fix kernel panic on asynchronous timewait destruction

Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com>
Acked-by: Denis V. Lunev <den@openvz.org>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 include/net/inet_timewait_sock.h |  3 +++
 net/ipv4/inet_timewait_sock.c    | 35 ++++++++++++++++++++++++++++++++
 net/ipv4/tcp_ipv4.c              |  1 +
 net/ipv6/tcp_ipv6.c              |  1 +
 4 files changed, 40 insertions(+)

diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index 95c660c9719..91324908fcc 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -208,6 +208,9 @@ extern void inet_twsk_schedule(struct inet_timewait_sock *tw,
 extern void inet_twsk_deschedule(struct inet_timewait_sock *tw,
 				 struct inet_timewait_death_row *twdr);
 
+extern void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo,
+			    struct inet_timewait_death_row *twdr, int family);
+
 static inline
 struct net *twsk_net(const struct inet_timewait_sock *twsk)
 {
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index d985bd613d2..743f011b9a8 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -409,3 +409,38 @@ out:
 }
 
 EXPORT_SYMBOL_GPL(inet_twdr_twcal_tick);
+
+void inet_twsk_purge(struct net *net, struct inet_hashinfo *hashinfo,
+		     struct inet_timewait_death_row *twdr, int family)
+{
+	struct inet_timewait_sock *tw;
+	struct sock *sk;
+	struct hlist_node *node;
+	int h;
+
+	local_bh_disable();
+	for (h = 0; h < (hashinfo->ehash_size); h++) {
+		struct inet_ehash_bucket *head =
+			inet_ehash_bucket(hashinfo, h);
+		rwlock_t *lock = inet_ehash_lockp(hashinfo, h);
+restart:
+		write_lock(lock);
+		sk_for_each(sk, node, &head->twchain) {
+
+			tw = inet_twsk(sk);
+			if (!net_eq(twsk_net(tw), net) ||
+			    tw->tw_family != family)
+				continue;
+
+			atomic_inc(&tw->tw_refcnt);
+			write_unlock(lock);
+			inet_twsk_deschedule(tw, twdr);
+			inet_twsk_put(tw);
+
+			goto restart;
+		}
+		write_unlock(lock);
+	}
+	local_bh_enable();
+}
+EXPORT_SYMBOL_GPL(inet_twsk_purge);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 44c1e934824..1b4fee20fc9 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2376,6 +2376,7 @@ static int __net_init tcp_sk_init(struct net *net)
 static void __net_exit tcp_sk_exit(struct net *net)
 {
 	inet_ctl_sock_destroy(net->ipv4.tcp_sock);
+	inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET);
 }
 
 static struct pernet_operations __net_initdata tcp_sk_ops = {
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 5b90b369ccb..b585c850a89 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -2148,6 +2148,7 @@ static int tcpv6_net_init(struct net *net)
 static void tcpv6_net_exit(struct net *net)
 {
 	inet_ctl_sock_destroy(net->ipv6.tcp_sk);
+	inet_twsk_purge(net, &tcp_hashinfo, &tcp_death_row, AF_INET6);
 }
 
 static struct pernet_operations tcpv6_net_ops = {
-- 
GitLab


From 8d4698f7a54a492a1b96c505b30fe750ae3e61d5 Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Mon, 8 Sep 2008 13:44:40 -0700
Subject: [PATCH 858/869] bridge: don't allow setting hello time to zero

Dushan Tcholich reports that on his system ksoftirqd can consume
between %6 to %10 of cpu time, and cause ~200 context switches per
second.

He then correlated this with a report by bdupree@techfinesse.com:

	http://marc.info/?l=linux-kernel&m=119613299024398&w=2

and the culprit cause seems to be starting the bridge interface.
In particular, when starting the bridge interface, his scripts
are specifying a hello timer interval of "0".

The bridge hello time can't be safely set to values less than 1
second, otherwise it is possible to end up with a runaway timer.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
 net/bridge/br_ioctl.c    |  8 +++++++-
 net/bridge/br_sysfs_br.c | 26 ++++++++++++++++++--------
 2 files changed, 25 insertions(+), 9 deletions(-)

diff --git a/net/bridge/br_ioctl.c b/net/bridge/br_ioctl.c
index eeee218eed8..5bbf0736217 100644
--- a/net/bridge/br_ioctl.c
+++ b/net/bridge/br_ioctl.c
@@ -188,15 +188,21 @@ static int old_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 		return 0;
 
 	case BRCTL_SET_BRIDGE_HELLO_TIME:
+	{
+		unsigned long t = clock_t_to_jiffies(args[1]);
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
+		if (t < HZ)
+			return -EINVAL;
+
 		spin_lock_bh(&br->lock);
-		br->bridge_hello_time = clock_t_to_jiffies(args[1]);
+		br->bridge_hello_time = t;
 		if (br_is_root_bridge(br))
 			br->hello_time = br->bridge_hello_time;
 		spin_unlock_bh(&br->lock);
 		return 0;
+	}
 
 	case BRCTL_SET_BRIDGE_MAX_AGE:
 		if (!capable(CAP_NET_ADMIN))
diff --git a/net/bridge/br_sysfs_br.c b/net/bridge/br_sysfs_br.c
index 27d6a511c8c..158dee8b496 100644
--- a/net/bridge/br_sysfs_br.c
+++ b/net/bridge/br_sysfs_br.c
@@ -29,11 +29,12 @@
  */
 static ssize_t store_bridge_parm(struct device *d,
 				 const char *buf, size_t len,
-				 void (*set)(struct net_bridge *, unsigned long))
+				 int (*set)(struct net_bridge *, unsigned long))
 {
 	struct net_bridge *br = to_bridge(d);
 	char *endp;
 	unsigned long val;
+	int err;
 
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
@@ -43,9 +44,9 @@ static ssize_t store_bridge_parm(struct device *d,
 		return -EINVAL;
 
 	spin_lock_bh(&br->lock);
-	(*set)(br, val);
+	err = (*set)(br, val);
 	spin_unlock_bh(&br->lock);
-	return len;
+	return err ? err : len;
 }
 
 
@@ -56,12 +57,13 @@ static ssize_t show_forward_delay(struct device *d,
 	return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->forward_delay));
 }
 
-static void set_forward_delay(struct net_bridge *br, unsigned long val)
+static int set_forward_delay(struct net_bridge *br, unsigned long val)
 {
 	unsigned long delay = clock_t_to_jiffies(val);
 	br->forward_delay = delay;
 	if (br_is_root_bridge(br))
 		br->bridge_forward_delay = delay;
+	return 0;
 }
 
 static ssize_t store_forward_delay(struct device *d,
@@ -80,12 +82,17 @@ static ssize_t show_hello_time(struct device *d, struct device_attribute *attr,
 		       jiffies_to_clock_t(to_bridge(d)->hello_time));
 }
 
-static void set_hello_time(struct net_bridge *br, unsigned long val)
+static int set_hello_time(struct net_bridge *br, unsigned long val)
 {
 	unsigned long t = clock_t_to_jiffies(val);
+
+	if (t < HZ)
+		return -EINVAL;
+
 	br->hello_time = t;
 	if (br_is_root_bridge(br))
 		br->bridge_hello_time = t;
+	return 0;
 }
 
 static ssize_t store_hello_time(struct device *d,
@@ -104,12 +111,13 @@ static ssize_t show_max_age(struct device *d, struct device_attribute *attr,
 		       jiffies_to_clock_t(to_bridge(d)->max_age));
 }
 
-static void set_max_age(struct net_bridge *br, unsigned long val)
+static int set_max_age(struct net_bridge *br, unsigned long val)
 {
 	unsigned long t = clock_t_to_jiffies(val);
 	br->max_age = t;
 	if (br_is_root_bridge(br))
 		br->bridge_max_age = t;
+	return 0;
 }
 
 static ssize_t store_max_age(struct device *d, struct device_attribute *attr,
@@ -126,9 +134,10 @@ static ssize_t show_ageing_time(struct device *d,
 	return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->ageing_time));
 }
 
-static void set_ageing_time(struct net_bridge *br, unsigned long val)
+static int set_ageing_time(struct net_bridge *br, unsigned long val)
 {
 	br->ageing_time = clock_t_to_jiffies(val);
+	return 0;
 }
 
 static ssize_t store_ageing_time(struct device *d,
@@ -180,9 +189,10 @@ static ssize_t show_priority(struct device *d, struct device_attribute *attr,
 		       (br->bridge_id.prio[0] << 8) | br->bridge_id.prio[1]);
 }
 
-static void set_priority(struct net_bridge *br, unsigned long val)
+static int set_priority(struct net_bridge *br, unsigned long val)
 {
 	br_stp_set_bridge_priority(br, (u16) val);
+	return 0;
 }
 
 static ssize_t store_priority(struct device *d, struct device_attribute *attr,
-- 
GitLab


From af904deaf6da3f3285eb0a06a3dc6a1af0251030 Mon Sep 17 00:00:00 2001
From: Chuck Lever <chuck.lever@oracle.com>
Date: Mon, 8 Sep 2008 11:58:13 -0400
Subject: [PATCH 859/869] NFS: Restore missing hunk in NFS mount option parser

Automounter maps can contain mount options valid for other NFS
implementations but not for Linux.  The Linux automounter uses the
mount command's "-s" command line option ("s" for "sloppy") so that
mount requests containing such options are not rejected.

Commit f45663ce5fb30f76a3414ab3ac69f4dd320e760a attempted to address a
known regression with text-based NFS mount option parsing.  Unrecognized
mount options would cause mount requests to fail, even if the "-s"
option was used on the mount command line.

Unfortunately, this commit was not complete as submitted.  It adds a
new mount option, "sloppy".  But it is missing a hunk, so it now allows
NFS mounts with unrecognized mount options, even if the "sloppy" option
is not present.  This could be a problem if a required critical mount
option such as "sync" is misspelled, for example, and is considered a
regression from 2.6.26.

This patch restores the missing hunk.  Now, the default behavior of
text-based NFS mount options is as before: any unrecognized mount option
will cause the mount to fail.

Please include this in 2.6.27-rc.

Thanks to Neil Brown for reporting this.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 fs/nfs/super.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 9abcd2b329f..e9b20173fef 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1279,6 +1279,12 @@ static int nfs_parse_mount_options(char *raw,
 		}
 	}
 
+	if (errors > 0) {
+		dfprintk(MOUNT, "NFS: parsing encountered %d error%s\n",
+				errors, (errors == 1 ? "" : "s"));
+		if (!sloppy)
+			return 0;
+	}
 	return 1;
 
 out_nomem:
-- 
GitLab


From 06dd881f59b3c07a430cdcbef2197f9b6dc79ae8 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Mon, 8 Sep 2008 14:53:37 +0100
Subject: [PATCH 860/869] usb: fix null deferences in low level usb serial

The hw interface drivers for the usb serial devices deference the tty
structure to set up the parameters for the initial console.  The tty
structure should be passed as a parameter to the set_termios() call.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/console.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 7b74238ad1c..e980766bb84 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -161,7 +161,7 @@ static int usb_console_setup(struct console *co, char *options)
 		if (serial->type->set_termios) {
 			termios->c_cflag = cflag;
 			tty_termios_encode_baud_rate(termios, baud, baud);
-			serial->type->set_termios(NULL, port, &dummy);
+			serial->type->set_termios(tty, port, &dummy);
 
 			port->port.tty = NULL;
 			kfree(termios);
-- 
GitLab


From a46add72f79bb8196f07a860adddd312ca398eec Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?=
 <ukleinek@informatik.uni-freiburg.de>
Date: Tue, 9 Sep 2008 00:11:39 +0200
Subject: [PATCH 861/869] Fix format of MAINTAINERS
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

... one entry lacked a colon which broke one of my scripts.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index af279458b61..b3e92fbe336 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1593,7 +1593,7 @@ S:	Supported
 EMBEDDED LINUX
 P:	Paul Gortmaker
 M:	paul.gortmaker@windriver.com
-P	David Woodhouse
+P:	David Woodhouse
 M:	dwmw2@infradead.org
 L:	linux-embedded@vger.kernel.org
 S:	Maintained
-- 
GitLab


From 3d6e48f43340343d97839eadb1ab7b6a3ea98797 Mon Sep 17 00:00:00 2001
From: Jarod Wilson <jwilson@redhat.com>
Date: Tue, 9 Sep 2008 12:38:56 +0200
Subject: [PATCH 862/869] [S390] CVE-2008-1514: prevent ptrace padding area
 read/write in 31-bit mode

When running a 31-bit ptrace, on either an s390 or s390x kernel,
reads and writes into a padding area in struct user_regs_struct32
will result in a kernel panic.

This is also known as CVE-2008-1514.

Test case available here:
http://sources.redhat.com/cgi-bin/cvsweb.cgi/~checkout~/tests/ptrace-tests/tests/user-area-padding.c?cvsroot=systemtap

Steps to reproduce:
1) wget the above
2) gcc -o user-area-padding-31bit user-area-padding.c -Wall -ggdb2 -D_GNU_SOURCE -m31
3) ./user-area-padding-31bit
<panic>

Test status
-----------
Without patch, both s390 and s390x kernels panic. With patch, the test case,
as well as the gdb testsuite, pass without incident, padding area reads
returning zero, writes ignored.

Nb: original version returned -EINVAL on write attempts, which broke the
gdb test and made the test case slightly unhappy, Jan Kratochvil suggested
the change to return 0 on write attempts.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 arch/s390/kernel/compat_ptrace.h |  1 +
 arch/s390/kernel/ptrace.c        | 28 ++++++++++++++++++++++++++++
 2 files changed, 29 insertions(+)

diff --git a/arch/s390/kernel/compat_ptrace.h b/arch/s390/kernel/compat_ptrace.h
index cde81fa64f8..a2be3a978d5 100644
--- a/arch/s390/kernel/compat_ptrace.h
+++ b/arch/s390/kernel/compat_ptrace.h
@@ -42,6 +42,7 @@ struct user_regs_struct32
 	u32 gprs[NUM_GPRS];
 	u32 acrs[NUM_ACRS];
 	u32 orig_gpr2;
+	/* nb: there's a 4-byte hole here */
 	s390_fp_regs fp_regs;
 	/*
 	 * These per registers are in here so that gdb can modify them
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 2815bfe348a..c8b08289eb8 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -170,6 +170,13 @@ static unsigned long __peek_user(struct task_struct *child, addr_t addr)
 		 */
 		tmp = (addr_t) task_pt_regs(child)->orig_gpr2;
 
+	} else if (addr < (addr_t) &dummy->regs.fp_regs) {
+		/*
+		 * prevent reads of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		tmp = 0;
+
 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
 		/* 
 		 * floating point regs. are stored in the thread structure
@@ -270,6 +277,13 @@ static int __poke_user(struct task_struct *child, addr_t addr, addr_t data)
 		 */
 		task_pt_regs(child)->orig_gpr2 = data;
 
+	} else if (addr < (addr_t) &dummy->regs.fp_regs) {
+		/*
+		 * prevent writes of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		return 0;
+
 	} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure
@@ -428,6 +442,13 @@ static u32 __peek_user_compat(struct task_struct *child, addr_t addr)
 		 */
 		tmp = *(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4);
 
+	} else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+		/*
+		 * prevent reads of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		tmp = 0;
+
 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure 
@@ -514,6 +535,13 @@ static int __poke_user_compat(struct task_struct *child,
 		 */
 		*(__u32*)((addr_t) &task_pt_regs(child)->orig_gpr2 + 4) = tmp;
 
+	} else if (addr < (addr_t) &dummy32->regs.fp_regs) {
+		/*
+		 * prevent writess of padding hole between
+		 * orig_gpr2 and fp_regs on s390.
+		 */
+		return 0;
+
 	} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
 		/*
 		 * floating point regs. are stored in the thread structure 
-- 
GitLab


From a2164b8174f13b7315c3f45c0b48dec619285096 Mon Sep 17 00:00:00 2001
From: Cornelia Huck <cornelia.huck@de.ibm.com>
Date: Tue, 9 Sep 2008 12:38:57 +0200
Subject: [PATCH 863/869] [S390] cio: Correct cleanup on error.

Fix cleanup on error in chp_new() and init_channel_subsystem()
(must not call kfree() on structures that had been registered).

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/chp.c |  7 ++++---
 drivers/s390/cio/css.c | 32 ++++++++++++++++++--------------
 2 files changed, 22 insertions(+), 17 deletions(-)

diff --git a/drivers/s390/cio/chp.c b/drivers/s390/cio/chp.c
index db00b059173..f1216cf6fa8 100644
--- a/drivers/s390/cio/chp.c
+++ b/drivers/s390/cio/chp.c
@@ -423,7 +423,7 @@ int chp_new(struct chp_id chpid)
 	ret = sysfs_create_group(&chp->dev.kobj, &chp_attr_group);
 	if (ret) {
 		device_unregister(&chp->dev);
-		goto out_free;
+		goto out;
 	}
 	mutex_lock(&channel_subsystems[chpid.cssid]->mutex);
 	if (channel_subsystems[chpid.cssid]->cm_enabled) {
@@ -432,14 +432,15 @@ int chp_new(struct chp_id chpid)
 			sysfs_remove_group(&chp->dev.kobj, &chp_attr_group);
 			device_unregister(&chp->dev);
 			mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
-			goto out_free;
+			goto out;
 		}
 	}
 	channel_subsystems[chpid.cssid]->chps[chpid.id] = chp;
 	mutex_unlock(&channel_subsystems[chpid.cssid]->mutex);
-	return ret;
+	goto out;
 out_free:
 	kfree(chp);
+out:
 	return ret;
 }
 
diff --git a/drivers/s390/cio/css.c b/drivers/s390/cio/css.c
index 51489eff6b0..1261e1a9e8c 100644
--- a/drivers/s390/cio/css.c
+++ b/drivers/s390/cio/css.c
@@ -633,6 +633,11 @@ channel_subsystem_release(struct device *dev)
 
 	css = to_css(dev);
 	mutex_destroy(&css->mutex);
+	if (css->pseudo_subchannel) {
+		/* Implies that it has been generated but never registered. */
+		css_subchannel_release(&css->pseudo_subchannel->dev);
+		css->pseudo_subchannel = NULL;
+	}
 	kfree(css);
 }
 
@@ -785,11 +790,15 @@ init_channel_subsystem (void)
 		}
 		channel_subsystems[i] = css;
 		ret = setup_css(i);
-		if (ret)
-			goto out_free;
+		if (ret) {
+			kfree(channel_subsystems[i]);
+			goto out_unregister;
+		}
 		ret = device_register(&css->device);
-		if (ret)
-			goto out_free_all;
+		if (ret) {
+			put_device(&css->device);
+			goto out_unregister;
+		}
 		if (css_chsc_characteristics.secm) {
 			ret = device_create_file(&css->device,
 						 &dev_attr_cm_enable);
@@ -802,7 +811,7 @@ init_channel_subsystem (void)
 	}
 	ret = register_reboot_notifier(&css_reboot_notifier);
 	if (ret)
-		goto out_pseudo;
+		goto out_unregister;
 	css_init_done = 1;
 
 	/* Enable default isc for I/O subchannels. */
@@ -810,18 +819,12 @@ init_channel_subsystem (void)
 
 	for_each_subchannel(__init_channel_subsystem, NULL);
 	return 0;
-out_pseudo:
-	device_unregister(&channel_subsystems[i]->pseudo_subchannel->dev);
 out_file:
-	device_remove_file(&channel_subsystems[i]->device,
-			   &dev_attr_cm_enable);
+	if (css_chsc_characteristics.secm)
+		device_remove_file(&channel_subsystems[i]->device,
+				   &dev_attr_cm_enable);
 out_device:
 	device_unregister(&channel_subsystems[i]->device);
-out_free_all:
-	kfree(channel_subsystems[i]->pseudo_subchannel->lock);
-	kfree(channel_subsystems[i]->pseudo_subchannel);
-out_free:
-	kfree(channel_subsystems[i]);
 out_unregister:
 	while (i > 0) {
 		struct channel_subsystem *css;
@@ -829,6 +832,7 @@ out_unregister:
 		i--;
 		css = channel_subsystems[i];
 		device_unregister(&css->pseudo_subchannel->dev);
+		css->pseudo_subchannel = NULL;
 		if (css_chsc_characteristics.secm)
 			device_remove_file(&css->device,
 					   &dev_attr_cm_enable);
-- 
GitLab


From c91ebe496120e05301465fff31094bfecf798e9f Mon Sep 17 00:00:00 2001
From: Cornelia Huck <cornelia.huck@de.ibm.com>
Date: Tue, 9 Sep 2008 12:38:58 +0200
Subject: [PATCH 864/869] [S390] cio: handle ssch() return codes correctly.

ssch() has two classes of return codes:
- condition codes (0-3) which need to be translated to Linux
  error codes
- Linux error codes (-EIO on exceptions) which should be passed
  to the caller (instead of erronously being handled like
  condition code 3)

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/cio.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 33bff8fec7d..5954b905e3c 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -208,8 +208,10 @@ cio_start_key (struct subchannel *sch,	/* subchannel structure */
 	case 1:		/* status pending */
 	case 2:		/* busy */
 		return -EBUSY;
-	default:		/* device/path not operational */
+	case 3:		/* device/path not operational */
 		return cio_start_handle_notoper(sch, lpm);
+	default:
+		return ccode;
 	}
 }
 
-- 
GitLab


From b301ea8c81b13123761772f344faf606c76ba174 Mon Sep 17 00:00:00 2001
From: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Date: Tue, 9 Sep 2008 12:38:59 +0200
Subject: [PATCH 865/869] [S390] cio: allow offline processing for disconnected
 devices

When disconnected ccw devices are removed, the device has to be set
offline, otherwise there will be side effects including a reference
count imbalance. This patch modifies ccw_device_offline to work for
devices in disconnecte/not operational state. ccw_device_offline is
called by cio for devices which are online during device removal.

Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
---
 drivers/s390/cio/device_fsm.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index 550508df952..84cc9ea346d 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -658,6 +658,13 @@ ccw_device_offline(struct ccw_device *cdev)
 {
 	struct subchannel *sch;
 
+	/* Allow ccw_device_offline while disconnected. */
+	if (cdev->private->state == DEV_STATE_DISCONNECTED ||
+	    cdev->private->state == DEV_STATE_NOT_OPER) {
+		cdev->private->flags.donotify = 0;
+		ccw_device_done(cdev, DEV_STATE_NOT_OPER);
+		return 0;
+	}
 	if (ccw_device_is_orphan(cdev)) {
 		ccw_device_done(cdev, DEV_STATE_OFFLINE);
 		return 0;
-- 
GitLab


From adaae7215e5130e5ce1ac3ee390e5a23101b09b2 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Tue, 9 Sep 2008 20:02:01 +0200
Subject: [PATCH 866/869] update Documentation/filesystems/Locking for 2.6.27
 changes

In the 2.6.27 circle ->fasync lost the BKL, and the last remaining
->open variant that takes the BKL is also gone.  ->get_sb and ->kill_sb
didn't have BKL forever, so updated the entries while we're at that.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 Documentation/filesystems/Locking | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 680fb566b92..8362860e21a 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -144,8 +144,8 @@ prototypes:
 	void (*kill_sb) (struct super_block *);
 locking rules:
 		may block	BKL
-get_sb		yes		yes
-kill_sb		yes		yes
+get_sb		yes		no
+kill_sb		yes		no
 
 ->get_sb() returns error or 0 with locked superblock attached to the vfsmount
 (exclusive on ->s_umount).
@@ -409,12 +409,12 @@ ioctl:			yes	(see below)
 unlocked_ioctl:		no	(see below)
 compat_ioctl:		no
 mmap:			no
-open:			maybe	(see below)
+open:			no
 flush:			no
 release:		no
 fsync:			no	(see below)
 aio_fsync:		no
-fasync:			yes	(see below)
+fasync:			no
 lock:			yes
 readv:			no
 writev:			no
@@ -431,13 +431,6 @@ For many filesystems, it is probably safe to acquire the inode
 semaphore.  Note some filesystems (i.e. remote ones) provide no
 protection for i_size so you will need to use the BKL.
 
-->open() locking is in-transit: big lock partially moved into the methods.
-The only exception is ->open() in the instances of file_operations that never
-end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices
-(chrdev_open() takes lock before replacing ->f_op and calling the secondary
-method. As soon as we fix the handling of module reference counters all
-instances of ->open() will be called without the BKL.
-
 Note: ext2_release() was *the* source of contention on fs-intensive
 loads and dropping BKL on ->release() helps to get rid of that (we still
 grab BKL for cases when we close a file that had been opened r/w, but that
-- 
GitLab


From 7ae115b4f50d3c5824f1a15e572b5de9d1b06d35 Mon Sep 17 00:00:00 2001
From: Chris Snook <csnook@redhat.com>
Date: Tue, 9 Sep 2008 03:26:57 -0400
Subject: [PATCH 867/869] MAINTAINERS: add Atheros maintainer for atlx

Jie Yang at Atheros is getting more directly involved with upstream work
on the atl* drivers.  This patch changes the ATL1 entry to ATLX (atl2
support posted to netdev today) and adds him as a maintainer.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 MAINTAINERS | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index b3e92fbe336..186be3ba506 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -750,11 +750,13 @@ P:	Ville Syrjala
 M:	syrjala@sci.fi
 S:	Maintained
 
-ATL1 ETHERNET DRIVER
+ATLX ETHERNET DRIVERS
 P:	Jay Cliburn
 M:	jcliburn@gmail.com
 P:	Chris Snook
 M:	csnook@redhat.com
+P:	Jie Yang
+M:	jie.yang@atheros.com
 L:	atl1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
-- 
GitLab


From deac93df26b20cf8438339b5935b5f5643bc30c9 Mon Sep 17 00:00:00 2001
From: James Bottomley <James.Bottomley@HansenPartnership.com>
Date: Wed, 3 Sep 2008 20:43:36 -0500
Subject: [PATCH 868/869] lib: Correct printk %pF to work on all architectures

It was introduced by "vsprintf: add support for '%pS' and '%pF' pointer
formats" in commit 0fe1ef24f7bd0020f29ffe287dfdb9ead33ca0b2.  However,
the current way its coded doesn't work on parisc64.  For two reasons: 1)
parisc isn't in the #ifdef and 2) parisc has a different format for
function descriptors

Make dereference_function_descriptor() more accommodating by allowing
architecture overrides.  I put the three overrides (for parisc64, ppc64
and ia64) in arch/kernel/module.c because that's where the kernel
internal linker which knows how to deal with function descriptors sits.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Tony Luck <tony.luck@intel.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 arch/ia64/include/asm/sections.h    |  3 +++
 arch/ia64/kernel/module.c           | 12 ++++++++++++
 arch/parisc/kernel/module.c         | 14 ++++++++++++++
 arch/powerpc/include/asm/sections.h |  3 +++
 arch/powerpc/kernel/module_64.c     | 13 ++++++++++++-
 include/asm-generic/sections.h      |  6 ++++++
 include/asm-parisc/sections.h       |  5 +++++
 lib/vsprintf.c                      | 11 +----------
 8 files changed, 56 insertions(+), 11 deletions(-)

diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h
index 7286e4a9fe8..a7acad2bc2f 100644
--- a/arch/ia64/include/asm/sections.h
+++ b/arch/ia64/include/asm/sections.h
@@ -21,5 +21,8 @@ extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_b
 extern char __start_unwind[], __end_unwind[];
 extern char __start_ivt_text[], __end_ivt_text[];
 
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+
 #endif /* _ASM_IA64_SECTIONS_H */
 
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index 29aad349e0c..545626f66a4 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -31,9 +31,11 @@
 #include <linux/elf.h>
 #include <linux/moduleloader.h>
 #include <linux/string.h>
+#include <linux/uaccess.h>
 #include <linux/vmalloc.h>
 
 #include <asm/patch.h>
+#include <asm/sections.h>
 #include <asm/unaligned.h>
 
 #define ARCH_MODULE_DEBUG 0
@@ -941,3 +943,13 @@ module_arch_cleanup (struct module *mod)
 	if (mod->arch.core_unw_table)
 		unw_remove_unwind_table(mod->arch.core_unw_table);
 }
+
+void *dereference_function_descriptor(void *ptr)
+{
+	struct fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->ip, p))
+		ptr = p;
+	return ptr;
+}
diff --git a/arch/parisc/kernel/module.c b/arch/parisc/kernel/module.c
index fdacdd4341c..44138c3e6ea 100644
--- a/arch/parisc/kernel/module.c
+++ b/arch/parisc/kernel/module.c
@@ -47,7 +47,9 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/bug.h>
+#include <linux/uaccess.h>
 
+#include <asm/sections.h>
 #include <asm/unwind.h>
 
 #if 0
@@ -860,3 +862,15 @@ void module_arch_cleanup(struct module *mod)
 	deregister_unwind_table(mod);
 	module_bug_cleanup(mod);
 }
+
+#ifdef CONFIG_64BIT
+void *dereference_function_descriptor(void *ptr)
+{
+	Elf64_Fdesc *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->addr, p))
+		ptr = p;
+	return ptr;
+}
+#endif
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
index 916018e425c..7710e9e6660 100644
--- a/arch/powerpc/include/asm/sections.h
+++ b/arch/powerpc/include/asm/sections.h
@@ -16,6 +16,9 @@ static inline int in_kernel_text(unsigned long addr)
 	return 0;
 }
 
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+
 #endif
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index ee6a2982d56..ad79de272ff 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -21,8 +21,9 @@
 #include <linux/err.h>
 #include <linux/vmalloc.h>
 #include <linux/bug.h>
+#include <linux/uaccess.h>
 #include <asm/module.h>
-#include <asm/uaccess.h>
+#include <asm/sections.h>
 #include <asm/firmware.h>
 #include <asm/code-patching.h>
 #include <linux/sort.h>
@@ -451,3 +452,13 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 
 	return 0;
 }
+
+void *dereference_function_descriptor(void *ptr)
+{
+	struct ppc64_opd_entry *desc = ptr;
+	void *p;
+
+	if (!probe_kernel_address(&desc->funcaddr, p))
+		ptr = p;
+	return ptr;
+}
diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h
index 8feeae1f236..79a7ff925bf 100644
--- a/include/asm-generic/sections.h
+++ b/include/asm-generic/sections.h
@@ -14,4 +14,10 @@ extern char __kprobes_text_start[], __kprobes_text_end[];
 extern char __initdata_begin[], __initdata_end[];
 extern char __start_rodata[], __end_rodata[];
 
+/* function descriptor handling (if any).  Override
+ * in asm/sections.h */
+#ifndef dereference_function_descriptor
+#define dereference_function_descriptor(p) (p)
+#endif
+
 #endif /* _ASM_GENERIC_SECTIONS_H_ */
diff --git a/include/asm-parisc/sections.h b/include/asm-parisc/sections.h
index fdd43ec42ec..9d13c3507ad 100644
--- a/include/asm-parisc/sections.h
+++ b/include/asm-parisc/sections.h
@@ -4,4 +4,9 @@
 /* nothing to see, move along */
 #include <asm-generic/sections.h>
 
+#ifdef CONFIG_64BIT
+#undef dereference_function_descriptor
+void *dereference_function_descriptor(void *);
+#endif
+
 #endif
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index d8d1d114224..c399bc1093c 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -27,6 +27,7 @@
 
 #include <asm/page.h>		/* for PAGE_SIZE */
 #include <asm/div64.h>
+#include <asm/sections.h>	/* for dereference_function_descriptor() */
 
 /* Works only for digits and letters, but small and fast */
 #define TOLOWER(x) ((x) | 0x20)
@@ -513,16 +514,6 @@ static char *string(char *buf, char *end, char *s, int field_width, int precisio
 	return buf;
 }
 
-static inline void *dereference_function_descriptor(void *ptr)
-{
-#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
-	void *p;
-	if (!probe_kernel_address(ptr, p))
-		ptr = p;
-#endif
-	return ptr;
-}
-
 static char *symbol_string(char *buf, char *end, void *ptr, int field_width, int precision, int flags)
 {
 	unsigned long value = (unsigned long) ptr;
-- 
GitLab


From d6be118a97ce51ca84035270f91c2bccecbfac5f Mon Sep 17 00:00:00 2001
From: Prarit Bhargava <prarit@redhat.com>
Date: Tue, 9 Sep 2008 09:56:08 -0400
Subject: [PATCH 869/869] x86: fix memmap=exactmap boot argument

When using kdump modifying the e820 map is yielding strange results.

For example starting with

 BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000100 - 0000000000093400 (usable)
 BIOS-e820: 0000000000093400 - 00000000000a0000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
 BIOS-e820: 000000003fee0000 - 000000003fef3000 (ACPI data)
 BIOS-e820: 000000003fef3000 - 000000003ff80000 (ACPI NVS)
 BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)

and booting with args

memmap=exactmap memmap=640K@0K memmap=5228K@16384K memmap=125188K@22252K memmap=76K#1047424K memmap=564K#1047500K

resulted in:

 user-defined physical RAM map:
 user: 0000000000000000 - 0000000000093400 (usable)
 user: 0000000000093400 - 00000000000a0000 (reserved)
 user: 0000000000100000 - 000000003fee0000 (usable)
 user: 000000003fee0000 - 000000003fef3000 (ACPI data)
 user: 000000003fef3000 - 000000003ff80000 (ACPI NVS)
 user: 000000003ff80000 - 0000000040000000 (reserved)
 user: 00000000e0000000 - 00000000f0000000 (reserved)
 user: 00000000fec00000 - 00000000fec10000 (reserved)
 user: 00000000fee00000 - 00000000fee01000 (reserved)
 user: 00000000ff000000 - 0000000100000000 (reserved)

But should have resulted in:

 user-defined physical RAM map:
 user: 0000000000000000 - 00000000000a0000 (usable)
 user: 0000000001000000 - 000000000151b000 (usable)
 user: 00000000015bb000 - 0000000008ffc000 (usable)
 user: 000000003fee0000 - 000000003ff80000 (ACPI data)

This is happening because of an improper usage of strcmp() in the
e820 parsing code.  The strcmp() always returns !0 and never resets the
value for e820.nr_map and returns an incorrect user-defined map.

This patch fixes the problem.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/e820.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 9af89078f7b..66e48aa2dd1 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1203,7 +1203,7 @@ static int __init parse_memmap_opt(char *p)
 	if (!p)
 		return -EINVAL;
 
-	if (!strcmp(p, "exactmap")) {
+	if (!strncmp(p, "exactmap", 8)) {
 #ifdef CONFIG_CRASH_DUMP
 		/*
 		 * If we are doing a crash dump, we still need to know
-- 
GitLab